Use of Key Performance Indicators to Improve Milestone Assessment in Semi-Annual Clinical Competency Committee Meetings

PubMed Central

Arora, Harendra; Martinelli, Susan M.

2017-01-01

Background: The Accreditation Council for Graduate Medical Education's Next Accreditation System requires residency programs to semiannually submit composite milestone data on each resident's performance. This report describes and evaluates a new assessment review procedure piloted in our departmental Clinical Competency Committee (CCC) semi-annual meeting in June 2016. Methods: A modified Delphi technique was utilized to develop key performance indicators (KPI) linking milestone descriptors to clinical practice. In addition, the CCC identified six specific milestone sub-competencies that would be prescored with objective data prior to the meeting. Each resident was independently placed on the milestones by 3 different CCC faculty members. Milestone placement data of the same cohort of 42 residents (Clinical Anesthesia Years 1–3) were collected to calculate inter-rater reliability of the assessment procedures before and after the implemented changes. A survey was administrated to collect CCC feedback on the new procedure. Results: The procedure assisted in reducing meeting time from 8 to 3.5 hours. Survey of the CCC members revealed positive perception of the procedure. Higher inter-rater reliability of the milestone placement was obtained using the implemented KPIs (Intraclass correlation coefficient [ICC] single measure range: before=.53–.94, after=.74–.98). Conclusion: We found the new assessment procedure beneficial to the efficiency and transparency of the assessment process. Further improvement of the procedure involves refinement of KPIs and additional faculty development on KPIs to allow non-CCC faculty to provide more accurate resident evaluations. PMID:29766033

Pediatrics Milestone Project: Next Steps Toward Meaningful Outcomes Assessment

PubMed Central

Hicks, Patricia J.; Englander, Robert; Schumacher, Daniel J.; Burke, Ann; Benson, Bradley J.; Guralnick, Susan; Ludwig, Stephen; Carraccio, Carol

2010-01-01

In the September 2010 issue of JGME, the Pediatric Milestones Working Group published “The Pediatrics Milestones: Conceptual Framework, Guiding Principles, and Approach to Development”, a document that describes the construction of the first iteration of the Pediatric Milestones. These Milestones were developed by the Working Group as a group of practical behavioral expectations for each of the 52 sub-competencies. In constructing these Milestones, the authors were cognizant of the need to ground the Milestones themselves in evidence, theories or other conceptual frameworks that would provide the basis for the ontogeny of development for each sub-competency. During this next phase of the Milestones development, the process will continue with consultation with content experts and consideration of assessment of Milestones. We have described possible measurement tools, explored threats to validity, establishment of benchmarks, and possible approaches to reporting of performance. The vision of the Pediatrics Milestone Project is to understand the development of a pediatrician from entry into medical school through the twilight of a physician’s career, and the work will require a collaborative effort of the undergraduate and graduate medical education communities, and the accrediting and certifying bodies. PMID:22132281

Tri-Lab Co-Design Milestone: In-Depth Performance Portability Analysis of Improved Integrated Codes on Advanced Architecture.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoekstra, Robert J.; Hammond, Simon David; Richards, David

2017-09-01

This milestone is a tri-lab deliverable supporting ongoing Co-Design efforts impacting applications in the Integrated Codes (IC) program element Advanced Technology Development and Mitigation (ATDM) program element. In FY14, the trilabs looked at porting proxy application to technologies of interest for ATS procurements. In FY15, a milestone was completed evaluating proxy applications in multiple programming models and in FY16, a milestone was completed focusing on the migration of lessons learned back into production code development. This year, the co-design milestone focuses on extracting the knowledge gained and/or code revisions back into production applications.

Multidisciplinary Analysis and Optimization Generation 1 and Next Steps

NASA Technical Reports Server (NTRS)

Naiman, Cynthia Gutierrez

2008-01-01

The Multidisciplinary Analysis & Optimization Working Group (MDAO WG) of the Systems Analysis Design & Optimization (SAD&O) discipline in the Fundamental Aeronautics Program s Subsonic Fixed Wing (SFW) project completed three major milestones during Fiscal Year (FY)08: "Requirements Definition" Milestone (1/31/08); "GEN 1 Integrated Multi-disciplinary Toolset" (Annual Performance Goal) (6/30/08); and "Define Architecture & Interfaces for Next Generation Open Source MDAO Framework" Milestone (9/30/08). Details of all three milestones are explained including documentation available, potential partner collaborations, and next steps in FY09.

Competency Assessment in Family Medicine Residency: Observations, Knowledge-Based Examinations, and Advancement.

PubMed

Mainous, Arch G; Fang, Bo; Peterson, Lars E

2017-12-01

The Family Medicine (FM) Milestones are competency-based assessments of residents in key dimensions relevant to practice in the specialty. Residency programs use the milestones in semiannual reviews of resident performance from the time of entry into the program to graduation. Using a national sample, we investigated the relationship of FM competency-based assessments to resident progress and the complementarity of milestones with knowledge-based assessments in FM residencies. We used midyear and end-of-year milestone ratings for all FM residents in Accreditation Council for Graduate Medical Education-accredited programs during academic years 2014-2015 and 2015-2016. The milestones contain 22 items across 6 competencies. We created a summative index across the milestones. The American Board of Family Medicine database provided resident demographics and in-training examination (ITE) scores. We linked information to the milestone data. The sample encompassed 6630 FM residents. The summative milestone index increased, on average, for each cohort (postgraduate year 1 [PGY-1] to PGY-2 and PGY-2 to PGY-3) at each assessment. The correlation between the milestone index that excluded the medical knowledge milestone and ITE scores was r  = .195 ( P  < .001) for PGY-1 to PGY-2 cohort and r  = .254 ( P  < .001) for PGY-2 to PGY-3 cohort. For both cohorts, ITE scores and composite milestone assessments were higher for residents who advanced than for those who did not. Competency-based assessment using the milestones for FM residents seems to be a viable multidimensional tool to assess the successful progression of residents.

Mindfulness, burnout, and effects on performance evaluations in internal medicine residents

PubMed Central

Braun, Sarah E; Auerbach, Stephen M; Rybarczyk, Bruce; Lee, Bennett; Call, Stephanie

2017-01-01

Purpose Burnout has been documented at high levels in medical residents with negative effects on performance. Some dispositional qualities, like mindfulness, may protect against burnout. The purpose of the present study was to assess burnout prevalence among internal medicine residents at a single institution, examine the relationship between mindfulness and burnout, and provide preliminary findings on the relation between burnout and performance evaluations in internal medicine residents. Methods Residents (n = 38) completed validated measures of burnout at three time points separated by 2 months and a validated measure of dispositional mindfulness at baseline. Program director end-of-year performance evaluations were also obtained on 22 milestones used to evaluate internal medicine resident performance; notably, these milestones have not yet been validated for research purposes; therefore, the investigation here is exploratory. Results Overall, 71.1% (n = 27) of the residents met criteria for burnout during the study. Lower scores on the “acting with awareness” facet of dispositional mindfulness significantly predicted meeting burnout criteria χ2(5) = 11.88, p = 0.04. Lastly, meeting burnout criteria significantly predicted performance on three of the performance milestones, with positive effects on milestones from the “system-based practices” and “professionalism” domains and negative effects on a milestone from the “patient care” domain. Conclusion Burnout rates were high in this sample of internal medicine residents and rates were consistent with other reports of burnout during medical residency. Dispositional mindfulness was supported as a protective factor against burnout. Importantly, results from the exploratory investigation of the relationship between burnout and resident evaluations suggested that burnout may improve performance on some domains of resident evaluations while compromising performance on other domains. Implications and directions for future research are discussed. PMID:28860889

Mindfulness, burnout, and effects on performance evaluations in internal medicine residents.

PubMed

Braun, Sarah E; Auerbach, Stephen M; Rybarczyk, Bruce; Lee, Bennett; Call, Stephanie

2017-01-01

Burnout has been documented at high levels in medical residents with negative effects on performance. Some dispositional qualities, like mindfulness, may protect against burnout. The purpose of the present study was to assess burnout prevalence among internal medicine residents at a single institution, examine the relationship between mindfulness and burnout, and provide preliminary findings on the relation between burnout and performance evaluations in internal medicine residents. Residents (n = 38) completed validated measures of burnout at three time points separated by 2 months and a validated measure of dispositional mindfulness at baseline. Program director end-of-year performance evaluations were also obtained on 22 milestones used to evaluate internal medicine resident performance; notably, these milestones have not yet been validated for research purposes; therefore, the investigation here is exploratory. Overall, 71.1% (n = 27) of the residents met criteria for burnout during the study. Lower scores on the "acting with awareness" facet of dispositional mindfulness significantly predicted meeting burnout criteria χ 2 (5) = 11.88, p = 0.04. Lastly, meeting burnout criteria significantly predicted performance on three of the performance milestones, with positive effects on milestones from the "system-based practices" and "professionalism" domains and negative effects on a milestone from the "patient care" domain. Burnout rates were high in this sample of internal medicine residents and rates were consistent with other reports of burnout during medical residency. Dispositional mindfulness was supported as a protective factor against burnout. Importantly, results from the exploratory investigation of the relationship between burnout and resident evaluations suggested that burnout may improve performance on some domains of resident evaluations while compromising performance on other domains. Implications and directions for future research are discussed.

Mapping Direct Observations From Objective Structured Clinical Examinations to the Milestones Across Specialties.

PubMed

Baker-Genaw, Kimberly; Kokas, Maria S; Ahsan, Syed F; Darnley-Fisch, Deborah; Drake, Sean; Goyal, Nikhil; Inamdar, Kedar; Moutzouros, Vasilios; Prabhakar, Deepak; Rolland, Laurie; Sangha, Roopina; Shreve, Maria; Woodward, Ann

2016-07-01

Little is known about residents' performance on the milestones at the institutional level. Our institution formed a work group to explore this using an institutional-level curriculum and residents' evaluation of the milestones. We assessed whether beginner-level milestones for interpersonal and communication skills (ICS) related to observable behaviors in ICS-focused objective structured clinical examinations (OSCEs) for postgraduate year (PGY) 1 residents across specialties. The work group compared ICS subcompetencies across 12 programs to identify common beginner-level physician-patient communication milestones. The selected ICS milestone sets were compared for common language with the ICS-OSCE assessment tool-the Kalamazoo Essential Elements of Communication Checklist-Adapted (KEECC-A). To assess whether OSCE scores related to ICS milestone scores, all PGY-1 residents from programs that were part of Next Accreditation System Phase 1 were identified; their OSCE scores from July 2013 to June 2014 and ICS subcompetency scores from December 2014 were compared. The milestones for 10 specialties and the transitional year had at least 1 ICS subcompetency that related to physician-patient communication. The language of the ICS beginner-level milestones appears similar to behaviors outlined in the KEECC-A. All 60 residents with complete data received at least a beginner-level ICS subcompetency score and at least a satisfactory score on all 3 OSCEs. The ICS-OSCE scores for PGY-1 residents appear to relate to beginner-level milestones for physician-patient communication across multiple specialties.

Milestone-Based Assessments Are Superior to Likert-Type Assessments in Illustrating Trainee Progression

PubMed Central

Bartlett, Kathleen W.; Whicker, Shari A.; Bookman, Jack; Narayan, Aditee P.; Staples, Betty B.; Hering, Holly; McGann, Kathleen A.

2015-01-01

Background The Pediatrics Milestone Project uses behavioral anchors, narrative descriptions of observable behaviors, to describe learner progression through the Accreditation Council for Graduate Medical Education competencies. Starting June 2014, pediatrics programs were required to submit milestone reports for their trainees semiannually. Likert-type scale assessment tools were not designed to inform milestone reporting, creating a challenge for Clinical Competency Committees. Objective To determine if milestone-based assessments better stratify trainees by training level compared to Likert-type assessments. Methods We compared assessment results for 3 subcompetencies after changing from a 5-point Likert scale to milestone-based behavioral anchors in July 2013. Program leadership evaluated the new system by (1) comparing PGY-1 mean scores on Likert-type versus milestone-based assessments; and (2) comparing mean scores on the Likert-type versus milestone-based assessments across PGY levels. Results Mean scores for PGY-1 residents were significantly higher on the prior year's Likert-type assessments than milestone-based assessments for all 3 subcompetencies (P < .01). Stratification by PGY level was not observed with Likert-type assessments (eg, interpersonal and communication skills 1 [ICS1] mean score for PGY-1, 3.99 versus PGY-3, 3.98; P  =  .98). In contrast, milestone-based assessments demonstrated stratification by PGY level (eg, the ICS1 mean score was 3.06 for PGY-1, 3.83 for PGY-2, and 3.99 for PGY-3; P < .01 for PGY-1 versus PGY-3). Significantly different means by trainee level were noted across 21 subcompetencies on milestone-based assessments (P < .01 for PGY-1 versus PGY-3). Conclusions Initial results indicate milestone-based assessments stratify trainee performance by level better than Likert-type assessments. Average PGY-level scores from milestone-based assessments may ultimately provide guidance for determining whether trainees are progressing at the expected pace. PMID:26217427

The problem resident behavior guide: strategies for remediation.

PubMed

Williamson, Kelly; Quattromani, Erin; Aldeen, Amer

2016-04-01

In 2012, the ACGME supplemented the core competencies with outcomes-based milestones for resident performance within the six competency domains. These milestones address the knowledge, skills, abilities, attitudes, and experiences that a resident is expected to progress through during the course of training. Even prior to the initiation of the milestones, there was a paucity of EM literature addressing the remediation of problem resident behaviors and there remain few readily accessible tools to aid in the implementation of a remediation plan. The goal of the "Problem Resident Behavior Guide" is to provide specific strategies for resident remediation based on deficiencies identified within the framework of the EM milestones. The "Problem Resident Behavior Guide" is a written instructional manual that provides concrete examples of remediation strategies to address specific milestone deficiencies. The more than 200 strategies stem from the experiences of the authors who have professional experience at three different academic hospitals and emergency medicine residency programs, supplemented by recommendations from educational leaders as well as utilization of valuable education adjuncts, such as focused simulation exercises, lecture preparation, and themed ED shifts. Most recommendations require active participation by the resident with guidance by faculty to achieve the remediation expectations. The ACGME outcomes-based milestones aid in the identification of deficiencies with regards to resident performance without providing recommendations on remediation. The Problem Resident Behavior Guide can therefore have a significant impact by filling in this gap.

Shortening the Miles to the Milestones: Connecting EPA-Based Evaluations to ACGME Milestone Reports for Internal Medicine Residency Programs.

PubMed

Choe, John H; Knight, Christopher L; Stiling, Rebekah; Corning, Kelli; Lock, Keli; Steinberg, Kenneth P

2016-07-01

The Next Accreditation System requires internal medicine training programs to provide the Accreditation Council for Graduate Medical Education (ACGME) with semiannual information about each resident's progress in 22 subcompetency domains. Evaluation of resident "trustworthiness" in performing entrustable professional activities (EPAs) may offer a more tangible assessment construct than evaluations based on expectations of usual progression toward competence. However, translating results from EPA-based evaluations into ACGME milestone progress reports has proven to be challenging because the constructs that underlay these two systems differ.The authors describe a process to bridge the gap between rotation-specific EPA-based evaluations and ACGME milestone reporting. Developed at the University of Washington in 2012 and 2013, this method involves mapping EPA-based evaluation responses to "milestone elements," the narrative descriptions within the columns of each of the 22 internal medicine subcompetencies. As faculty members complete EPA-based evaluations, the mapped milestone elements are automatically marked as "confirmed." Programs can maintain a database that tallies the number of times each milestone element is confirmed for a resident; these data can be used to produce graphical displays of resident progress along the internal medicine milestones.Using this count of milestone elements allows programs to bridge the gap between faculty assessments of residents based on rotation-specific observed activities and semiannual ACGME reports based on the internal medicine milestones. Although potentially useful for all programs, this method is especially beneficial to large programs where clinical competency committee members may not have the opportunity for direct observation of all residents.

A Milestone-Based Evaluation System-The Cure for Grade Inflation?

PubMed

Kuo, Lindsay E; Hoffman, Rebecca L; Morris, Jon B; Williams, Noel N; Malachesky, Mark; Huth, Laura E; Kelz, Rachel R

2015-01-01

Controversy exists over the optimal use of the Milestones in the process of resident evaluation and feedback. We sought to evaluate the performance of a Milestones-based feedback system in comparison to a traditional model. The traditional evaluation system (TES) consisted of a generic 16-item survey using a 5-point Likert scale ranging from 1 to 5, and a free-text comments section. The Milestones-based evaluation system (MBES) was launched in July 2014, ranging from 0 to 4. Individual milestones were mapped to rotations based on resident educational goals by postgraduate year (PGY). The MBES consisted of a survey with a maximum of 7 items, followed by a free-text comment section. Within each evaluation system, an overall composite score was calculated for each categorical general surgical resident. To scale the 2 systems for comparison, TES scores were adjusted downward by 1 point. Descriptive statistics were performed. Univariate analysis was performed with the Wilcoxon signed-rank test. A test for trend across PGY was used for the MBES only. In the traditional system, the median score was 3.66 (range: 3.2-4.0). There was no meaningful difference in the median score by PGY. In the new system, the median score was 2.69 (range: 1.5-3.7, p < 0.01). The median score differed across PGY and increased by PGY of training (p < 0.01). There was an increase in differences between median scores by PGY. On using the milestones to facilitate faculty evaluation of resident knowledge and skill, there was a trend in increasing score by PGY of training. In the MBES, scores could be used to better discriminate resident skill and knowledge levels and resulted in improved differentiation in scoring by PGY. The use of the milestones as a basis for evaluation enabled the program to provide more meaningful feedback to residents and represents an improvement in surgical education. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Summary of FY 17 Assessments Sandia National Laboratories: Evaluation of FY16 SNL FCT M2 Milestone Deliverables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appel, Gordon John

This report is the milestone deliverable M4FT-17SN111102091 “Summary of Assessments Performed FY17 by SNL QA POC” for work package FT-17SN11110209 titled “Quality Assurance – SNL”. This report summarizes the FY17 assessment performed on Fuel Cycle Technologies / Spent Fuel and Waste Disposition efforts.

Early Warning Look Ahead Metrics: The Percent Milestone Backlog Metric

NASA Technical Reports Server (NTRS)

Shinn, Stephen A.; Anderson, Timothy P.

2017-01-01

All complex development projects experience delays and corresponding backlogs of their project control milestones during their acquisition lifecycles. NASA Goddard Space Flight Center (GSFC) Flight Projects Directorate (FPD) teamed with The Aerospace Corporation (Aerospace) to develop a collection of Early Warning Look Ahead metrics that would provide GSFC leadership with some independent indication of the programmatic health of GSFC flight projects. As part of the collection of Early Warning Look Ahead metrics, the Percent Milestone Backlog metric is particularly revealing, and has utility as a stand-alone execution performance monitoring tool. This paper describes the purpose, development methodology, and utility of the Percent Milestone Backlog metric. The other four Early Warning Look Ahead metrics are also briefly discussed. Finally, an example of the use of the Percent Milestone Backlog metric in providing actionable insight is described, along with examples of its potential use in other commodities.

Benchmarking emergency department thoracotomy: Using trauma video review to generate procedural norms.

PubMed

Dumas, Ryan P; Chreiman, Kristen M; Seamon, Mark J; Cannon, Jeremy W; Reilly, Patrick M; Christie, Jason D; Holena, Daniel N

2018-05-23

Emergency department thoracotomy (EDT) must be rapid and well-executed. Currently there are no defined benchmarks for EDT procedural milestones. We hypothesized that trauma video review (TVR) can be used to define the 'normative EDT' and generate procedural benchmarks. As a secondary aim, we hypothesized that data collected by TVR would have less missingness and bias than data collected by review of the Electronic Medical Record (EMR). We used continuously recording video to review all EDTs performed at our centre during the study period. Using skin incision as start time, we defined four procedural milestones for EDT: 1. Decompression of the right chest (tube thoracostomy, finger thoracostomy, or clamshell thoracotomy with transverse sternotomy performed in conjunction with left anterolateral thoracotomy) 2. Retractor deployment 3. Pericardiotomy 4. Aortic Cross-clamp. EDTs with any milestone time ≥ 75 th percentile of time or during which a milestone was omitted were identified as outliers. We compared rates of missingness in data collected by TVR and EMR using McNemar's test. 44 EDTs were included from the study period. Patients had a median age of 30 [IQR 25-44] and were predominantly African-American (95%) males (93%) with penetrating trauma (95%). From skin incision, median times in minutes to milestones were as follows: right chest decompression: 2.11 [IQR 0.68-2.83], retractor deployment 1.35 [IQR 0.96-1.85], pericardiotomy 2.35 [IQR 1.85-3.75], aortic cross-clamp 3.71 [IQR 2.83-5.77]. In total, 28/44 (64%) of EDTs were either high outliers for one or more benchmarks or had milestones that were omitted. For all milestones, rates of missingness for TVR data were lower than EMR data (p < 0.001). Video review can be used to define normative times for the procedural milestones of EDT. Steps exceeding the 75 th percentile of time were common, with over half of EDTs having at least one milestone as an outlier. Data quality is higher using TVR compared to EMR collection. Future work should seek to determine if minimizing procedural technical outliers improves patient outcomes. Copyright © 2018 Elsevier Ltd. All rights reserved.

Code Verification Capabilities and Assessments in Support of ASC V&V Level 2 Milestone #6035

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doebling, Scott William; Budzien, Joanne Louise; Ferguson, Jim Michael

This document provides a summary of the code verification activities supporting the FY17 Level 2 V&V milestone entitled “Deliver a Capability for V&V Assessments of Code Implementations of Physics Models and Numerical Algorithms in Support of Future Predictive Capability Framework Pegposts.” The physics validation activities supporting this milestone are documented separately. The objectives of this portion of the milestone are: 1) Develop software tools to support code verification analysis; 2) Document standard definitions of code verification test problems; and 3) Perform code verification assessments (focusing on error behavior of algorithms). This report and a set of additional standalone documents servemore » as the compilation of results demonstrating accomplishment of these objectives.« less

Educational Milestone Development in the First 7 Specialties to Enter the Next Accreditation System

PubMed Central

Swing, Susan R.; Beeson, Michael S.; Carraccio, Carol; Coburn, Michael; Iobst, William; Selden, Nathan R.; Stern, Peter J.; Vydareny, Kay

2013-01-01

Background The Accreditation Council for Graduate Medical Education (ACGME) Outcome Project introduced 6 general competencies relevant to medical practice but fell short of its goal to create a robust assessment system that would allow program accreditation based on outcomes. In response, the ACGME, the specialty boards, and other stakeholders collaborated to develop educational milestones, observable steps in residents' professional development that describe progress from entry to graduation and beyond. Objectives We summarize the development of the milestones, focusing on 7 specialties, moving to the next accreditation system in July 2013, and offer evidence of their validity. Methods Specialty workgroups with broad representation used a 5-level developmental framework and incorporated information from literature reviews, specialty curricula, dialogue with constituents, and pilot testing. Results The workgroups produced richly diverse sets of milestones that reflect the community's consideration of attributes of competence relevant to practice in the given specialty. Both their development process and the milestones themselves establish a validity argument, when contemporary views of validity for complex performance assessment are used. Conclusions Initial evidence for validity emerges from the development processes and the resulting milestones. Further advancing a validity argument will require research on the use of milestone data in resident assessment and program accreditation. PMID:24404235

Hardware Based Technology Assessment in Support of Near-Term Space Fission Missions

NASA Technical Reports Server (NTRS)

Houts, Mike; VanDyke, Melissa; Godfroy, Tom; Martin, James; BraggSitton, Shannon; Carter, Robert; Dickens, Ricky; Salvail, Pat; Williams, Eric; Harper, Roger

2003-01-01

Fission technology can enable rapid, affordable access to any point in the solar system. If fission propulsion systems are to be developed to their full potential; however, near-term customers must be identified and initial fission systems successfully developed, launched, and utilized. Successful utilization will most likely occur if frequent, significant hardware-based milestones can be achieved throughout the program. Achieving these milestones will depend on the capability to perform highly realistic non-nuclear testing of nuclear systems. This paper discusses ongoing and potential research that could help achieve these milestones.

A report documenting the completion of the Los Alamos National Laboratory portion of the ASC level II milestone ""Visualization on the supercomputing platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahrens, James P; Patchett, John M; Lo, Li - Ta

2011-01-24

This report provides documentation for the completion of the Los Alamos portion of the ASC Level II 'Visualization on the Supercomputing Platform' milestone. This ASC Level II milestone is a joint milestone between Sandia National Laboratory and Los Alamos National Laboratory. The milestone text is shown in Figure 1 with the Los Alamos portions highlighted in boldfaced text. Visualization and analysis of petascale data is limited by several factors which must be addressed as ACES delivers the Cielo platform. Two primary difficulties are: (1) Performance of interactive rendering, which is the most computationally intensive portion of the visualization process. Formore » terascale platforms, commodity clusters with graphics processors (GPUs) have been used for interactive rendering. For petascale platforms, visualization and rendering may be able to run efficiently on the supercomputer platform itself. (2) I/O bandwidth, which limits how much information can be written to disk. If we simply analyze the sparse information that is saved to disk we miss the opportunity to analyze the rich information produced every timestep by the simulation. For the first issue, we are pursuing in-situ analysis, in which simulations are coupled directly with analysis libraries at runtime. This milestone will evaluate the visualization and rendering performance of current and next generation supercomputers in contrast to GPU-based visualization clusters, and evaluate the perfromance of common analysis libraries coupled with the simulation that analyze and write data to disk during a running simulation. This milestone will explore, evaluate and advance the maturity level of these technologies and their applicability to problems of interest to the ASC program. In conclusion, we improved CPU-based rendering performance by a a factor of 2-10 times on our tests. In addition, we evaluated CPU and CPU-based rendering performance. We encourage production visualization experts to consider using CPU-based rendering solutions when it is appropriate. For example, on remote supercomputers CPU-based rendering can offer a means of viewing data without having to offload the data or geometry onto a CPU-based visualization system. In terms of comparative performance of the CPU and CPU we believe that further optimizations of the performance of both CPU or CPU-based rendering are possible. The simulation community is currently confronting this reality as they work to port their simulations to different hardware architectures. What is interesting about CPU rendering of massive datasets is that for part two decades CPU performance has significantly outperformed CPU-based systems. Based on our advancements, evaluations and explorations we believe that CPU-based rendering has returned as one viable option for the visualization of massive datasets.« less

Identifying Gaps in the Performance of Pediatric Trainees Who Receive Marginal/Unsatisfactory Ratings.

PubMed

Li, Su-Ting T; Tancredi, Daniel J; Schwartz, Alan; Guillot, Ann; Burke, Ann; Trimm, R Franklin; Guralnick, Susan; Mahan, John D; Gifford, Kimberly A

2018-01-01

To perform a derivation study to determine in which subcompetencies marginal/unsatisfactory pediatric residents had the greatest deficits compared with their satisfactorily performing peers and which subcompetencies best discriminated between marginal/unsatisfactory and satisfactorily performing residents. Multi-institutional cohort study of all 21 milestones (rated on four or five levels) reported to the Accreditation Council for Graduate Medical Education, and global marginal/unsatisfactory versus satisfactory performance reported to the American Board of Pediatrics. Data were gathered in 2013-2014. For each level of training (postgraduate year [PGY] 1, 2, and 3), mean differences between milestone levels of residents with marginal/unsatisfactory and satisfactory performance adjusted for clustering by program and C-statistics (area under receiver operating characteristic curve) were calculated. A Bonferroni-corrected significance threshold of .0007963 was used to account for multiple comparisons. Milestone and overall performance evaluations for 1,704 pediatric residents in 41 programs were obtained. For PGY1s, two subcompetencies had almost a one-point difference in milestone levels between marginal/unsatisfactory and satisfactory trainees and outstanding discrimination (≥ 0.90): organize/prioritize (0.93; C-statistic: 0.91) and transfer of care (0.97; C-statistic: 0.90). The largest difference between marginal/unsatisfactory and satisfactory PGY2s was trustworthiness (0.78). The largest differences between marginal/unsatisfactory and satisfactory PGY3s were ethical behavior (1.17), incorporating feedback (1.03), and professionalization (0.96). For PGY2s and PGY3s, no subcompetencies had outstanding discrimination. Marginal/unsatisfactory pediatric residents had different subcompetency gaps at different training levels. While PGY1s may have global deficits, senior residents may have different performance deficiencies requiring individualized counseling and targeted performance improvement plans.

The pathology milestones and the next accreditation system.

PubMed

Naritoku, Wesley Y; Alexander, C Bruce; Bennett, Betsy D; Black-Schaffer, W Stephen; Brissette, Mark D; Grimes, Margaret M; Hoffman, Robert D; Hunt, Jennifer L; Iezzoni, Julia C; Johnson, Rebecca; Kozel, Jessica; Mendoza, Ricardo M; Post, Miriam D; Powell, Suzanne Z; Procop, Gary W; Steinberg, Jacob J; Thorsen, Linda M; Nestler, Steven P

2014-03-01

In the late 1990s, the Accreditation Council for Graduate Medical Education developed the Outcomes Project and the 6 general competencies with the intent to improve the outcome of graduate medical education in the United States. The competencies were used as the basis for developing learning goals and objectives and tools to evaluate residents' performance. By the mid-2000s the stakeholders in resident education and the general public felt that the Outcomes Project had fallen short of expectations. To develop a new evaluation method to track trainee progress throughout residency using benchmarks called milestones. A change in leadership at the Accreditation Council for Graduate Medical Education brought a new vision for the accreditation of training programs and a radically different approach to the evaluation of residents. The Pathology Milestones Working Group reviewed examples of developing milestones in other specialties, the literature, and the Accreditation Council for Graduate Medical Education program requirements for pathology to develop pathology milestones. The pathology milestones are a set of objective descriptors for measuring progress in the development of competency in patient care, procedural skill sets, medical knowledge, practice-based learning and improvement, interpersonal and communication skills, professionalism, and systems-based practice. The milestones provide a national standard for evaluation that will be used for the assessment of all residents in Accreditation Council for Graduate Medical Education-accredited pathology training programs.

How do clinical competency committees use different sources of data to assess residents' performance on the internal medicine milestones?A mixed methods pilot study.

PubMed

Ekpenyong, Andem; Baker, Elizabeth; Harris, Ilene; Tekian, Ara; Abrams, Richard; Reddy, Shalini; Park, Yoon Soo

2017-10-01

This study examines how Clinical Competency Committees (CCCs) synthesize assessment data to make judgments about residents' clinical performances. Between 2014 and 2015, after four six-month reporting periods to the Accreditation Council for Graduate Medical Education (ACGME), 7 of 16 CCC faculty at Rush University Medical Center completed questionnaires focused on their perspectives about rating residents on their achievement of the milestones and participated in a focus group. Qualitative data were analyzed using grounded theory. Milestones ratings for two six-month ACGME reporting cycles (n = 100 categorical residents) were also analyzed. CCC members weighted resident rotation ratings highest (weight = 37%), followed by faculty rotation comments (weight = 27%) and personal experience with residents (weight = 14%) for making judgments about learner's milestone levels. Three assessment issues were identified from qualitative analyses: (1) "design issues" (e.g. problems with available data or lack thereof); (2) "synthesis issues" (e.g. factors influencing ratings and decision-making processes) and (3) "impact issues" (e.g. how CCC generated milestones ratings are used). Identifying factors that affect assessment at all stages of the CCC process can contribute to improving assessment systems, including support for faculty development for CCCs. Recognizing challenges in synthesizing first and second-hand assessment data is an important step in understanding the CCC decision-making process.

No Differences in Achieving Hepatitis C Virus Care Milestones Between Patients Identified by Birth Cohort or Risk-Based Screening.

PubMed

Norton, Brianna L; Southern, William N; Steinman, Meredith; Smith, Bryce D; Deluca, Joseph; Rosner, Zachary; Litwin, Alain H

2016-09-01

National hepatitis C virus (HCV) screening guidelines recommended 1-time testing of persons born between 1945 and 1965. We performed a retrospective study to compare care milestones achieved by HCV-infected patients identified by birth cohort versus risk-based screens. We determined the proportions of patients newly identified with HCV infection who met care milestones (viral load, referral to and evaluation by a specialist, offer of treatment, initiation of treatment, and sustained viral response) and the time it took to reach them. We found no differences in HCV care milestones for patients identified via birth cohort testing versus risk-based screening. Overall, only 43% of HCV antibody-positive patients were referred to care, and less than 4% started treatment. The time to each care milestone was lengthy and varied greatly; treatment was initiated in a median of 308 days. Although birth cohort testing will likely increase identification of patients with HCV infection, it does not seem to increase the number of patients that meet management milestones. New methods are needed to increase access to care and establish efficient models of health care delivery. Copyright © 2016 AGA Institute. Published by Elsevier Inc. All rights reserved.

DOE FES FY2017 Joint Research Target Fourth Quarter Milestone Report for theNational Spherical Torus Experiment Upgrade.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soukhanovskii, V. A.

2017-09-13

A successful high-performance plasma operation with a radiative divertor has been demonstrated on many tokamak devices, however, significant uncertainty remains in accurately modeling detachment thresholds, and in how detachment depends on divertor geometry. Whereas it was originally planned to perform dedicated divertor experiments on the National Spherical Tokamak Upgrade to address critical detachment and divertor geometry questions for this milestone, the experiments were deferred due to technical difficulties. Instead, existing NSTX divertor data was summarized and re-analyzed where applicable, and additional simulations were performed.

The Decision to Incision Curriculum: Teaching Preoperative Skills and Achieving Level 1 Milestones.

PubMed

Skinner, Bethany; Morgan, Helen; Kobernik, Emily; Kamdar, Neil; Curran, Diana; Marzano, David; Hammoud, Maya

2016-01-01

To evaluate the effectiveness of a preoperative skills curriculum, and to assess and document competence in associated Obstetrics and Gynecology Level 1 Milestones. The Decision to Incision curriculum was developed by a team of medical educators with the goal of teaching and evaluating 5 skills pertinent to Milestone 1: Preoperative consent, patient positioning, Foley catheter placement, surgical scrub, and preoperative time-out. Competence, overall skill performance, and knowledge were assessed by evaluator rating using checklists before and after the educational intervention. Differences between preintervention and postintervention skills performance and competence were assessed using Wilcoxon rank test and Fisher exact test, respectively. Clinical Simulation Center at an academic medical center. Overall, 29 fourth year medical students matriculating into Obstetrics and Gynecology residencies. The proportion of participants meeting Milestone competence significantly increased in all 5 skills, with competence achieved in 95.6% (95% CI: 92.1-99.0) of posttest skills assessments. Median overall performance also significantly improved for all 5 skills, with 83.6% (95% CI: 77.3-89.9) earning scores of 4 out of 5 or greater on the posttest. For knowledge testing, the proportion of correct responses significantly increased for both topics evaluated, from 45.2% to 99.7% (p < 0.0001) for positioning and from 32.8% to 83.1% (p < 0.0001) for time-out. The decision to incision curriculum significantly improved preoperative skills, including skills that may be required on day 1 of residency. This curriculum also facilitated achievement and documentation of competence in multiple Milestones. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Have First-Year Emergency Medicine Residents Achieved Level 1 on Care-Based Milestones?

PubMed Central

Weizberg, Moshe; Bond, Michael C.; Cassara, Michael; Doty, Christopher; Seamon, Jason

2015-01-01

Background Residents in Accreditation Council for Graduate Medical Education accredited emergency medicine (EM) residencies were assessed on 23 educational milestones to capture their progression from medical student level (Level 1) to that of an EM attending physician (Level 5). Level 1 was conceptualized to be at the level of an incoming postgraduate year (PGY)-1 resident; however, this has not been confirmed. Objectives Our primary objective in this study was to assess incoming PGY-1 residents to determine what percentage achieved Level 1 for the 8 emergency department (ED) patient care–based milestones (PC 1–8), as assessed by faculty. Secondary objectives involved assessing what percentage of residents had achieved Level 1 as assessed by themselves, and finally, we calculated the absolute differences between self- and faculty assessments. Methods Incoming PGY-1 residents at 4 EM residencies were assessed by faculty and themselves during their first month of residency. Performance anchors were adapted from ACGME milestones. Results Forty-one residents from 4 programs were included. The percentage of residents who achieved Level 1 for each subcompetency on faculty assessment ranged from 20% to 73%, and on self-assessment from 34% to 92%. The majority did not achieve Level 1 on faculty assessment of milestones PC-2, PC-3, PC-5a, and PC-6, and on self-assessment of PC-3 and PC-5a. Self-assessment was higher than faculty assessment for PC-2, PC-5b, and PC-6. Conclusions Less than 75% of PGY-1 residents achieved Level 1 for ED care-based milestones. The majority did not achieve Level 1 on 4 milestones. Self-assessments were higher than faculty assessments for several milestones. PMID:26692971

X-ray satellite

NASA Technical Reports Server (NTRS)

1985-01-01

The 3rd Quarter Status Report on DFVLR's ROSAT project confirms that with regard to technical performance and costs the project is on schedule. The valid schedule for engineering model and flight model completion on May 7, 1985 leads to a launch date on October 30, 1987. Progress in each department is compared to and explained with regard to the milestone plan. Continued problems with the gold damping of the FM-mirror system and contamination of the sterile rooms where the mirrors are stored have led to postponement of milestone 7. It is not yet completely clear to what extent all successive milestones will be affected by this factor.

Age cohort differences in the developmental milestones of gay men.

PubMed

Drasin, Harry; Beals, Kristin P; Elliott, Marc N; Lever, Janet; Klein, David J; Schuster, Mark A

2008-01-01

As the social context in which gay men live changes due to greater visibility, greater acceptance, and easier access to gay subculture, gay males may self-identify and take part in gay social activities at earlier ages than in the past. This study examined whether developmental milestones associated with sexual orientation for gay men have changed over the past several decades. A large and diverse sample of 2,402 gay men who responded to a 1994 survey published in a national magazine provided retrospective information on the age at which they reached individual psychological, social, and sexual behavior developmental milestones. We found evidence that individual psychological and sexual behavior milestones (e.g., awareness of attraction to males, having an orgasm with other male) are slowly moving toward earlier chronological ages (by 1 year of age every 8-25 years, p < 0.05), whereas social milestones (e.g., coming out) are moving more rapidly in a similar direction (by 1 year of age every 2-5 years, p < 0.001). The authors perform an innovative sensitivity test to demonstrate the persistence of the finding after correcting for the bias attributable to underrepresentation of those who have not yet self-identified as gay in such samples.

Developmental Milestones

MedlinePlus

... 3 years 4 years 5 years Milestone Tracker App Milestones in Action: Photos & Videos 2 months 4 ... milestone checklists (PDF) Download the Milestone Tracker mobile app View the Milestones in Action photo and video ...

The Pediatrics Milestones Assessment Pilot: Development of Workplace-Based Assessment Content, Instruments, and Processes.

PubMed

Hicks, Patricia J; Margolis, Melissa; Poynter, Sue E; Chaffinch, Christa; Tenney-Soeiro, Rebecca; Turner, Teri L; Waggoner-Fountain, Linda; Lockridge, Robin; Clyman, Stephen G; Schwartz, Alan

2016-05-01

To report on the development of content and user feedback regarding the assessment process and utility of the workplace-based assessment instruments of the Pediatrics Milestones Assessment Pilot (PMAP). One multisource feedback instrument and two structured clinical observation instruments were developed and refined by experts in pediatrics and assessment to provide evidence for nine competencies based on the Pediatrics Milestones (PMs) and chosen to inform residency program faculty decisions about learners' readiness to serve as pediatric interns in the inpatient setting. During the 2012-2013 PMAP study, 18 U.S. pediatric residency programs enrolled interns and subinterns. Faculty, residents, nurses, and other observers used the instruments to assess learner performance through direct observation during a one-month rotation. At the end of the rotation, data were aggregated for each learner, milestone levels were assigned using a milestone classification form, and feedback was provided to learners. Learners and site leads were surveyed and/or interviewed about their experience as participants. Across the sites, 2,338 instruments assessing 239 learners were completed by 630 unique observers. Regarding end-of-rotation feedback, 93% of learners (128/137) agreed the assessments and feedback "helped me understand how those with whom I work perceive my performance," and 85% (117/137) agreed they were "useful for constructing future goals or identifying a developmental path." Site leads identified several benefits and challenges to the assessment process. PM-based instruments used in workplace-based assessment provide a meaningful and acceptable approach to collecting evidence of learner competency development. Learners valued feedback provided by PM-based assessment.

Develop feedback system for intelligent dynamic resource allocation to improve application performance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gentile, Ann C.; Brandt, James M.; Tucker, Thomas

2011-09-01

This report provides documentation for the completion of the Sandia Level II milestone 'Develop feedback system for intelligent dynamic resource allocation to improve application performance'. This milestone demonstrates the use of a scalable data collection analysis and feedback system that enables insight into how an application is utilizing the hardware resources of a high performance computing (HPC) platform in a lightweight fashion. Further we demonstrate utilizing the same mechanisms used for transporting data for remote analysis and visualization to provide low latency run-time feedback to applications. The ultimate goal of this body of work is performance optimization in the facemore » of the ever increasing size and complexity of HPC systems.« less

Level-2 Milestone 3244: Deploy Dawn ID Machine for Initial Science Runs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, D

2009-09-21

This report documents the delivery, installation, integration, testing, and acceptance of the Dawn system, ASC L2 milestone 3244: Deploy Dawn ID Machine for Initial Science Runs, due September 30, 2009. The full text of the milestone is included in Attachment 1. The description of the milestone is: This milestone will be a result of work started three years ago with the planning for a multi-petaFLOPS UQ-focused platform (Sequoia) and will be satisfied when a smaller ID version of the final system is delivered, installed, integrated, tested, accepted, and deployed at LLNL for initial science runs in support of SSP mission.more » The deliverable for this milestone will be a LA petascale computing system (named Dawn) usable for code development and scaling necessary to ensure effective use of a final Sequoia platform (expected in 2011-2012), and for urgent SSP program needs. Allocation and scheduling of Dawn as an LA system will likely be performed informally, similar to what has been used for BlueGene/L. However, provision will be made to allow for dedicated access times for application scaling studies across the entire Dawn resource. The milestone was completed on April 1, 2009, when science runs began running on the Dawn system. The following sections describe the Dawn system architecture, current status, installation and integration time line, and testing and acceptance process. A project plan is included as Attachment 2. Attachment 3 is a letter certifying the handoff of the system to a nuclear weapons stockpile customer. Attachment 4 presents the results of science runs completed on the system.« less

A suggested emergency medicine boot camp curriculum for medical students based on the mapping of Core Entrustable Professional Activities to Emergency Medicine Level 1 milestones.

PubMed

Lamba, Sangeeta; Wilson, Bryan; Natal, Brenda; Nagurka, Roxanne; Anana, Michael; Sule, Harsh

2016-01-01

An increasing number of students rank Emergency Medicine (EM) as a top specialty choice, requiring medical schools to provide adequate exposure to EM. The Core Entrustable Professional Activities (EPAs) for Entering Residency by the Association of American Medical Colleges combined with the Milestone Project for EM residency training has attempted to standardize the undergraduate and graduate medical education goals. However, it remains unclear as to how the EPAs correlate to the milestones, and who owns the process of ensuring that an entering EM resident has competency at a certain minimum level. Recent trends establishing specialty-specific boot camps prepare students for residency and address the variability of skills of students coming from different medical schools. Our project's goal was therefore to perform a needs assessment to inform the design of an EM boot camp curriculum. Toward this goal, we 1) mapped the core EPAs for graduating medical students to the EM residency Level 1 milestones in order to identify the possible gaps/needs and 2) conducted a pilot procedure workshop that was designed to address some of the identified gaps/needs in procedural skills. In order to inform the curriculum of an EM boot camp, we used a systematic approach to 1) identify gaps between the EPAs and EM milestones (Level 1) and 2) determine what essential and supplemental competencies/skills an incoming EM resident should ideally possess. We then piloted a 1-day, three-station advanced ABCs procedure workshop based on the identified needs. A pre-workshop test and survey assessed knowledge, preparedness, confidence, and perceived competence. A post-workshop survey evaluated the program, and a posttest combined with psychomotor skills test using three simulation cases assessed students' skills. Students (n=9) reported increased confidence in the following procedures: intubation (1.5-2.1), thoracostomy (1.1-1.9), and central venous catheterization (1.3-2) (a three-point Likert-type scale, with 1= not yet confident/able to perform with supervision to 3= confident/able to perform without supervision). Psychomotor skills testing showed on average, 26% of students required verbal prompting with performance errors, 48% with minor performance errors, and 26% worked independently without performance errors. All participants reported: 1) increased knowledge and confidence in covered topics and 2) overall satisfaction with simulation experience. Mapping the Core EPAs for Entering Residency to the EM milestones at Level 1 identifies educational gaps for graduating medical students seeking a career in EM. Educators designing EM boot camps for medical students should consider these identified gaps, procedures, and clinical conditions during the development of a core standardized curriculum.

Filter Measurement System for Nuclear Material Storage Canisters. End of Year Report FY 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, Murray E.; Reeves, Kirk P.

2014-02-03

A test system has been developed at Los Alamos National Laboratory to measure the aerosol collection efficiency of filters in the lids of storage canisters for special nuclear materials. Two FTS (filter test system) devices have been constructed; one will be used in the LANL TA-55 facility with lids from canisters that have stored nuclear material. The other FTS device will be used in TA-3 at the Radiation Protection Division’s Aerosol Engineering Facility. The TA-3 system will have an expanded analytical capability, compared to the TA-55 system that will be used for operational performance testing. The LANL FTS is intendedmore » to be automatic in operation, with independent instrument checks for each system component. The FTS has been described in a complete P&ID (piping and instrumentation diagram) sketch, included in this report. The TA-3 FTS system is currently in a proof-of-concept status, and TA-55 FTS is a production-quality prototype. The LANL specification for (Hagan and SAVY) storage canisters requires the filter shall “capture greater than 99.97% of 0.45-micron mean diameter dioctyl phthalate (DOP) aerosol at the rated flow with a DOP concentration of 65±15 micrograms per liter”. The percent penetration (PEN%) and pressure drop (DP) of fifteen (15) Hagan canister lids were measured by NFT Inc. (Golden, CO) over a period of time, starting in the year 2002. The Los Alamos FTS measured these quantities on June 21, 2013 and on Oct. 30, 2013. The LANL(6-21-2013) results did not statistically match the NFT Inc. data, and the LANL FTS system was re-evaluated, and the aerosol generator was replaced and the air flow measurement method was corrected. The subsequent LANL(10-30-2013) tests indicate that the PEN% results are statistically identical to the NFT Inc. results. The LANL(10-30-2013) pressure drop measurements are closer to the NFT Inc. data, but future work will be investigated. An operating procedure for the FTS (filter test system) was written, and future project milestones are on track for completion« less

An Innovative Injection and Mixing System for Diesel Fuel Reforming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer Pack

2007-12-31

This project focused on fuel stream preparation improvements prior to injection into a solid oxide fuel cell reformer. Each milestone and the results from each milestone are discussed in detail in this report. The first two milestones were the creation of a coking formation test rig and various testing performed on this rig. Initial tests indicated that three anti-carbon coatings showed improvement over an uncoated (bare metal) baseline. However, in follow-up 70 hour tests of the down selected coatings, Scanning Electron Microscope (SEM) analysis revealed that no carbon was generated on the test specimens. These follow-up tests were intended tomore » enable a down selection to a single best anti-carbon coating. Without the formation of carbon it was impossible to draw conclusions as to which anti-carbon coating showed the best performance. The final 70 hour tests did show that AMCX AMC26 demonstrated the lowest discoloration of the metal out of the three down selected anti-carbon coatings. This discoloration did not relate to carbon but could be a useful result when carbon growth rate is not the only concern. Unplanned variations in the series of tests must be considered and may have altered the results. Reliable conclusions could only be drawn from consistent, repeatable testing beyond the allotted time and funding for this project. Milestones 3 and 4 focused on the creation of a preheating pressure atomizer and mixing chamber. A design of experiment test helped identify a configuration of the preheating injector, Build 1, which showed a very uniform fuel spray flow field. This injector was improved upon by the creation of a Build 2 injector. Build 2 of the preheating injector demonstrated promising SMD results with only 22psi fuel pressure and 0.7 in H2O of Air. It was apparent from testing and CFD that this Build 2 has flow field recirculation zones. These recirculation zones may suggest that this Build 2 atomizer and mixer would require steam injection to reduce the auto ignition potential. It is also important to note that to achieve uniform mixing within a short distance, some recirculation is necessary. Milestone 5 generated CFD and FEA results that could be used to optimize the preheating injector. CFD results confirmed the recirculation zones seen in test data and confirmed that the flow field would not change when attached to a reformer. The FEA predicted fuel wetted wall temperatures which led to several suggested improvements that could possibly improve nozzle efficiency. Milestone 6 (originally an optional task) took a different approach than the preheating pressure atomizer. It focused on creation and optimization of a piezoelectric injector which could perform at extremely low fuel pressures. The piezoelectric atomizer showed acceptable SMD results with fuel pressure less than 1.0 psig and air pressure less than 1.0 in H2O. These SMD values were enhanced when a few components were changed, and it is expected would improve further still at elevated air temperatures. It was demonstrated that the piezoelectric injector could accomplish the desired task. The addition of phase tracking and a burst mode to the frequency controller increased the usability of the piezoelectric injector. This injector is ready to move on to the next phase of development. Engine Components has met the required program milestones of this project. Some of the Milestones were adjusted to allow Milestone 6 to be completed in parallel with the other Milestones. Because of this, Task 3.10 and 3.13 were made optional instead of Milestone 6. Engine Components was extremely grateful for the support that was provided by NETL in support of this work.« less

Comparing Real-time Versus Delayed Video Assessments for Evaluating ACGME Sub-competency Milestones in Simulated Patient Care Environments

PubMed Central

Stiegler, Marjorie; Hobbs, Gene; Martinelli, Susan M; Zvara, David; Arora, Harendra; Chen, Fei

2018-01-01

Background Simulation is an effective method for creating objective summative assessments of resident trainees. Real-time assessment (RTA) in simulated patient care environments is logistically challenging, especially when evaluating a large group of residents in multiple simulation scenarios. To date, there is very little data comparing RTA with delayed (hours, days, or weeks later) video-based assessment (DA) for simulation-based assessments of Accreditation Council for Graduate Medical Education (ACGME) sub-competency milestones. We hypothesized that sub-competency milestone evaluation scores obtained from DA, via audio-video recordings, are equivalent to the scores obtained from RTA. Methods Forty-one anesthesiology residents were evaluated in three separate simulated scenarios, representing different ACGME sub-competency milestones. All scenarios had one faculty member perform RTA and two additional faculty members perform DA. Subsequently, the scores generated by RTA were compared with the average scores generated by DA. Variance component analysis was conducted to assess the amount of variation in scores attributable to residents and raters. Results Paired t-tests showed no significant difference in scores between RTA and averaged DA for all cases. Cases 1, 2, and 3 showed an intraclass correlation coefficient (ICC) of 0.67, 0.85, and 0.50 for agreement between RTA scores and averaged DA scores, respectively. Analysis of variance of the scores assigned by the three raters showed a small proportion of variance attributable to raters (4% to 15%). Conclusions The results demonstrate that video-based delayed assessment is as reliable as real-time assessment, as both assessment methods yielded comparable scores. Based on a department’s needs or logistical constraints, our findings support the use of either real-time or delayed video evaluation for assessing milestones in a simulated patient care environment. PMID:29736352

From alcohol initiation to tolerance to problems: Discordant twin modeling of a developmental process

PubMed Central

Deutsch, Arielle R.; Slutske, Wendy S.; Lynskey, Michael T.; Bucholz, Kathleen K.; Madden, Pamela A. F.; Heath, Andrew C.; Martin, Nicholas G.

2017-01-01

The current study examined a stage-based alcohol use trajectory model to test for potential causal effects of earlier drinking milestones on later drinking milestones in a combined sample of two cohorts of Australian monozygotic and same-sex dizygotic twins (N = 7,398, age M = 30.46, SD = 2.61, 61% mal 56% monozygotic twins). Ages of drinking, drunkenness, regular drinking, tolerance, first nontolerance alcohol use disorder symptom, and alcohol use disorder symptom onsets were assessed retrospectively. Ages of milestone attainment (i.e., age-of-onset) and time between milestones (i.e., time-to-even were examined via frailty models within a multilevel discordant twin design. For age-of-onset models, earlier ages of onset of antecedent drinking milestones increased hazards for earlier ages of onset for more proximal subsequent drinking milestones. For the time-to-event models, however, earlier ag of onset for the “starting” milestone decreased risk for a shorter time period between the starting and the “ending” milestone. Earlier age of onset of intermediate milestones between starting and ending drinking milestones had the opposite effect, increasing risk for a shorter time period between the starti and ending milestones. These results are consistent with a causal effect of an earlier age of drinking milestone onset on temporally proximal subsequent drinking milestones. PMID:27417028

Infant developmental milestones and adult intelligence: A 34-year follow-up.

PubMed

Flensborg-Madsen, Trine; Mortensen, Erik Lykke

2015-07-01

A number of studies suggest a positive association between faster infant motor development and intellectual function in childhood and adolescence. However, studies investigating the relationship between infant motor development and intelligence in adulthood are lacking. To investigate whether age at achievement of 12 motor developmental milestones was associated with adult intelligence and to evaluate the influence of sex, parental social status, parity, mother's cigarette consumption in the last trimester, gestational age, birthweight, and birth length on this association. Mothers of 9125 children of the Copenhagen Perinatal Cohort recorded 12 developmental milestones during the child's first year of life. A subsample of the cohort comprising 1155 individuals participated in a follow-up when they were aged 20-34 years and were administered the Wechsler Adult Intelligence Scale (WAIS). Associations between motor developmental milestones and IQ were analysed by multiple linear regression adjusting for potential confounding factors. Later acquisition of infant developmental milestones was associated with lower subsequent IQ, and the majority of significant associations were found for Performance IQ. Correlations were generally small (r < 0.10), but significant interactions were found between parental social status and age of attaining developmental milestones, with associations being significantly stronger in the offspring of lower social status parents. The effects remained significant after adjusting for possible confounding factors. This is the first study to find significant interactions with parental social status, thereby suggesting that associations between early motor development and intelligence are stronger in infants of low social status parents. Copyright © 2015 Elsevier B.V. All rights reserved.

Scoliosis in children with osteogenesis imperfecta: influence of severity of disease and age of reaching motor milestones.

PubMed

Engelbert, Raoul H H; Uiterwaal, Cuno S P M; van der Hulst, Annelies; Witjes, Baukje; Helders, Paul J M; Pruijs, Hans E H

2003-04-01

We studied the relationship between the age of reaching motor milestones, especially anti-gravity activities, and the age of development of pathological spinal curvatures in children with osteogenesis imperfecta (OI). We hypothesized that earlier achievement of anti-gravity motor milestones predicts a later development of pathological spinal curvatures. Ninety-six children participated in this retrospective study. The severity of the disease was classified according to Sillence into types I-IV. Spinal radiography was performed annually and spinal deformities were measured according to the Cobb angle. Scoliosis was defined as a Cobb angle exceeding 9 degrees. Pathological thoracic kyphosis was defined as a Cobb angle exceeding 40 degrees. The parents were asked to report the age at which the child achieved motor milestones, and data were checked against health care records. Thirty-seven of 96 children (39%) developed a scoliosis of more than 9 degrees. Nine of 96 children (9%) developed a pathological kyphosis. The age of developing scoliosis was significantly lower than the age of development of the pathological kyphosis (P=0.01). Bone mineral density was measured by dual energy X-ray absorptiometry (DEXA) in 53 children, 28 of whom developed scoliosis, and 25 of whom did not. The mean DEXA Z-score of the 28 children with scoliosis was significantly lower than that of the 25 children without (-5.2, SD 1.3 vs -3.2, SD 1.9; P-value <0.001). Children with OI type IV, but particularly OI type III, reached motor milestones much later than children with OI type I. The motor milestone "supported sitting" showed a significant inverse association with time of the first presence of scoliosis with a Cobb angle greater than 9 degrees (linear regression coefficient: -1.3, 95% confidence interval: -2.6 to -0.03). The age of achieving the motor milestones "lifting the head to 45 degrees in prone position", "rolling", and "supported-" and "unsupported standing" were not significantly associated with age of the first presence of scoliosis with a Cobb angle greater than 9 degrees. However, the directions of associations suggest that here, too, there is a tendency for later development of scoliosis in those who reach milestones at earlier ages. Multivariable analyses showed that the motor milestone "sitting with support" was significantly associated with age of first achieving scoliosis, independent of gender and type of OI (linear regression coefficient: -0.9, 95% confidence interval: -1.3 to -0.5). We conclude that in children with OI, the age of anti-gravity motor milestones was associated with the age of development of pathological spinal curvatures. Earlier achievement of the motor milestone "supported sitting" predicted significantly a later development of pathological spinal curvatures, independent of gender and type of OI.

Comparison of Male vs Female Resident Milestone Evaluations by Faculty During Emergency Medicine Residency Training

PubMed Central

Dayal, Arjun; O’Connor, Daniel M.; Qadri, Usama

2017-01-01

Importance Although implicit bias in medical training has long been suspected, it has been difficult to study using objective measures, and the influence of sex and gender in the evaluation of medical trainees is unknown. The emergency medicine (EM) milestones provide a standardized framework for longitudinal resident assessment, allowing for analysis of resident performance across all years and programs at a scope and level of detail never previously possible. Objective To compare faculty-observed training milestone attainment of male vs female residency training Design, Setting, and Participants This multicenter, longitudinal, retrospective cohort study took place at 8 community and academic EM training programs across the United States from July 1, 2013, to July 1, 2015, using a real-time, mobile-based, direct-observation evaluation tool. The study examined 33 456 direct-observation subcompetency evaluations of 359 EM residents by 285 faculty members. Main Outcomes and Measures Milestone attainment for male and female EM residents as observed by male and female faculty throughout residency and analyzed using multilevel mixed-effects linear regression modeling. Results A total of 33 456 direct-observation evaluations were collected from 359 EM residents (237 men [66.0%] and 122 women [34.0%]) by 285 faculty members (194 men [68.1%] and 91 women [31.9%]) during the study period. Female and male residents achieved similar milestone levels during the first year of residency. However, the rate of milestone attainment was 12.7% (0.07 levels per year) higher for male residents through all of residency (95% CI, 0.04-0.09). By graduation, men scored approximately 0.15 milestone levels higher than women, which is equivalent to 3 to 4 months of additional training, given that the average resident gains approximately 0.52 levels per year using our model (95% CI, 0.49-0.54). No statistically significant differences in scores were found based on faculty evaluator gender (effect size difference, 0.02 milestone levels; 95% CI for males, −0.09 to 0.11) or evaluator-evaluatee gender pairing (effect size difference, −0.02 milestone levels; 95% CI for interaction, −0.05 to 0.01). Conclusions and Relevance Although male and female residents receive similar evaluations at the beginning of residency, the rate of milestone attainment throughout training was higher for male than female residents across all EM subcompetencies, leading to a gender gap in evaluations that continues until graduation. Faculty should be cognizant of possible gender bias when evaluating medical trainees. PMID:28264090

On the assumptions underlying milestoning.

PubMed

Vanden-Eijnden, Eric; Venturoli, Maddalena; Ciccotti, Giovanni; Elber, Ron

2008-11-07

Milestoning is a procedure to compute the time evolution of complicated processes such as barrier crossing events or long diffusive transitions between predefined states. Milestoning reduces the dynamics to transition events between intermediates (the milestones) and computes the local kinetic information to describe these transitions via short molecular dynamics (MD) runs between the milestones. The procedure relies on the ability to reinitialize MD trajectories on the milestones to get the right kinetic information about the transitions. It also rests on the assumptions that the transition events between successive milestones and the time lags between these transitions are statistically independent. In this paper, we analyze the validity of these assumptions. We show that sets of optimal milestones exist, i.e., sets such that successive transitions are indeed statistically independent. The proof of this claim relies on the results of transition path theory and uses the isocommittor surfaces of the reaction as milestones. For systems in the overdamped limit, we also obtain the probability distribution to reinitialize the MD trajectories on the milestones, and we discuss why this distribution is not available in closed form for systems with inertia. We explain why the time lags between transitions are not statistically independent even for optimal milestones, but we show that working with such milestones allows one to compute mean first passage times between milestones exactly. Finally, we discuss some practical implications of our results and we compare milestoning with Markov state models in view of our findings.

The association of 2-year-old training milestones with career length and racing success in a sample of Thoroughbred horses in New Zealand.

PubMed

Tanner, J C; Rogers, C W; Firth, E C

2013-01-01

There is increasing evidence that exercise early in life has a positive effect on musculoskeletal health. At present, there is little whole population research investigating the effect of racing as 2-year-olds on future racing career. To investigate the association between attaining training milestones as 2-year-olds with length of career and racing success in Thoroughbred horses in New Zealand. Retrospective data were obtained of the 2001/02-born Thoroughbred foal crop. The 3 training milestones were: registered with a trainer, trialled and raced. The association of the training milestones with career length was measured using the outcomes: number of race starts and number of years raced, in a Cox regression model. Logistic regression models analysed the association of the training milestones with the outcomes: won or placed in a race. Linear regression was performed to assess the association of training milestones with total career earnings. Of 4683 horses in the population; 3152 horses were registered with a trainer, 2661 horses trialled and 2109 horses raced. Horses that raced as 2-year-olds had significantly (P<0.001) more race starts than those first raced as 3-year-olds or older, this was also true when the 2-year-old year data were omitted. Horses that raced as 2-year-olds had significantly (P<0.001) more years racing. Horses registered with a trainer, trialled or raced as 2-year-olds were more likely to have won or been placed in a race than those that achieved the milestones as 3-year-olds or older. Horses that first trialled and raced as 2-year-olds had greater total earnings than those that first trialled or raced at a later age. Two-year-old training milestones had a strong association with positive racing career outcomes. Horses in training or racing as 2-year-olds may have better musculoskeletal health throughout life than horses that are first in training or racing at a later age. © 2012 EVJ Ltd.

Resident dashboards: helping your clinical competency committee visualize trainees' key performance indicators.

PubMed

Friedman, Karen A; Raimo, John; Spielmann, Kelly; Chaudhry, Saima

2016-01-01

Introduction Under the Next Accreditation System, programs need to find ways to collect and assess meaningful reportable information on its residents to assist the program director regarding resident milestone progression. This paper discusses the process that one large Internal Medicine Residency Program used to provide both quantitative and qualitative data to its clinical competency committee (CCC) through the creation of a resident dashboard. Methods Program leadership at a large university-based program developed four new end of rotation evaluations based on the American Board of Internal Medicine (ABIM) and Accreditation Council of Graduated Medical Education's (ACGME) 22 reportable milestones. A resident dashboard was then created to pull together both milestone- and non-milestone-based quantitative data and qualitative data compiled from faculty, nurses, peers, staff, and patients. Results Dashboards were distributed to the members of the CCC in preparation for the semiannual CCC meeting. CCC members adjudicated quantitative and qualitative data to present their cohort of residents at the CCC meeting. Based on the committee's response, evaluation scores remained the same or were adjusted. Final milestone scores were then entered into the accreditation data system (ADS) on the ACGME website. Conclusions The process of resident assessment is complex and should comprise both quantitative and qualitative data. The dashboard is a valuable tool for program leadership to use both when evaluating house staff on a semiannual basis at the CCC and to the resident in person.

Resident dashboards: helping your clinical competency committee visualize trainees' key performance indicators.

PubMed

Friedman, Karen A; Raimo, John; Spielmann, Kelly; Chaudhry, Saima

2016-01-01

Under the Next Accreditation System, programs need to find ways to collect and assess meaningful reportable information on its residents to assist the program director regarding resident milestone progression. This paper discusses the process that one large Internal Medicine Residency Program used to provide both quantitative and qualitative data to its clinical competency committee (CCC) through the creation of a resident dashboard. Program leadership at a large university-based program developed four new end of rotation evaluations based on the American Board of Internal Medicine (ABIM) and Accreditation Council of Graduated Medical Education's (ACGME) 22 reportable milestones. A resident dashboard was then created to pull together both milestone- and non-milestone-based quantitative data and qualitative data compiled from faculty, nurses, peers, staff, and patients. Dashboards were distributed to the members of the CCC in preparation for the semiannual CCC meeting. CCC members adjudicated quantitative and qualitative data to present their cohort of residents at the CCC meeting. Based on the committee's response, evaluation scores remained the same or were adjusted. Final milestone scores were then entered into the accreditation data system (ADS) on the ACGME website. The process of resident assessment is complex and should comprise both quantitative and qualitative data. The dashboard is a valuable tool for program leadership to use both when evaluating house staff on a semiannual basis at the CCC and to the resident in person.

[Autism and Early Neurodevelopmental Milestones].

PubMed

Ferreira, Xavier; Oliveira, Guiomar

2016-03-01

Autism spectrum disorder, also referred to in this study as autism, is a neurodevelopmental chronic disease that manifests early in childhood by impairment in social interaction, communication and repetitive behavior. Since there are no specific biomarkers available, the diagnosis is based exclusively on clinical criteria. The purpose of the present study is to determine which are the early psychomotor development or neurodevelopmental milestones that present a significant correlation with the severity of the main symptoms of autism, development quotients, and adaptive function. We performed a retrospective study on a sample of 1572 individuals with a diagnosis of autism that were monitored at Hospital Pediátrico do Centro Hospitalar e Universitário de Coimbra, in the Neurodevelopment and Autism Unit. We analyzed six early psychomotor developmental milestones: age of acquisition of 'walking', 'first words', 'first phrases', 'daytime control of bladder sphincter', 'night-time control of bladder sphincter', and age of first complaints. Afterwards, we divided the sample in three subgroups regarding clinical severity, according to the Childhood Autism Rating Scale, and we analyzed significant differences among each other concerning the six milestones established beforehand. The milestone 'age of first phrases' was, from the six milestones, the one with a stronger correlation with the variables of clinical manifestations of autism, development/intelligence quotients, and adaptive function. In division of the sample into subgroups of clinical severity, it was the most severe that showed later ages of acquisition of the neurodevelopmental milestones and earlier ages of first complaints. This study proves the clinical utility to know the age of achievement of early psychomotor developmental skills, since they act as predictors of clinical severity of autism, cognition, and adaptive function of a wide population with autism. Therefore, this data contribute for prognostic and prediction of autism progression. Taking into account the results of this study, it is strongly recommended to all clinicians who have contact with autistic children, to record the 'age of acquisition of first phrases'.

Comparison of developmental milestone attainment in early treated HIV-infected infants versus HIV-unexposed infants: a prospective cohort study.

PubMed

Benki-Nugent, Sarah; Wamalwa, Dalton; Langat, Agnes; Tapia, Kenneth; Adhiambo, Judith; Chebet, Daisy; Okinyi, Helen Moraa; John-Stewart, Grace

2017-01-17

Infant HIV infection is associated with delayed milestone attainment. The extent to which effective antiretroviral therapy (ART) prevents these delays is not well defined. Ages at attainment of milestones were compared between HIV-infected (initiated ART by age <5 months), and HIV-unexposed uninfected (HUU) infants. Kaplan Meier analyses were used to estimate and compare (log-rank tests) ages at milestones between groups. Adjusted analyses were performed using Cox proportional hazards models. Seventy-three HIV-infected on ART (median enrollment age 3.7 months) and 92 HUU infants (median enrollment age 1.6 months) were followed prospectively. HIV-infected infants on ART had delays in developmental milestone attainment compared to HUU: median age at attainment of sitting with support, sitting unsupported, walking with support, walking unsupported, monosyllabic speech and throwing toys were each delayed (all p-values <0.0005). Compared with HUU, the subset of HIV-infected infants with both virologic suppression and immune recovery at 6 months had delays for speech (delay: 2.0 months; P = 0.0002) and trend to later walking unsupported. Among HIV-infected infants with poor 6-month post-ART responses (lacking viral suppression and immune recovery) there were greater delays versus HUU for: walking unsupported (delay: 4.0 months; P = 0.0001) and speech (delay: 5.0 months; P < 0.0001). HIV infected infants with viral suppression on ART had better recovery of developmental milestones than those without suppression, however, deficits persisted compared to uninfected infants. Earlier ART may be required for optimized cognitive outcomes in perinatally HIV-infected infants. NCT00428116 ; January 22, 2007.

Developmental milestones record - 6 months

MedlinePlus

Normal childhood growth milestones - 6 months; Childhood growth milestones - 6 months; Growth milestones for children - 6 months ... the weight on hands (often occurs by 4 months) Able to pick up a dropped object Able ...

CTF (Subchannel) Calculations and Validation L3:VVI.H2L.P15.01

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon, Natalie

The goal of the Verification and Validation Implementation (VVI) High to Low (Hi2Lo) process is utilizing a validated model in a high resolution code to generate synthetic data for improvement of the same model in a lower resolution code. This process is useful in circumstances where experimental data does not exist or it is not sufficient in quantity or resolution. Data from the high-fidelity code is treated as calibration data (with appropriate uncertainties and error bounds) which can be used to train parameters that affect solution accuracy in the lower-fidelity code model, thereby reducing uncertainty. This milestone presents a demonstrationmore » of the Hi2Lo process derived in the VVI focus area. The majority of the work performed herein describes the steps of the low-fidelity code used in the process with references to the work detailed in the companion high-fidelity code milestone (Reference 1). The CASL low-fidelity code used to perform this work was Cobra Thermal Fluid (CTF) and the high-fidelity code was STAR-CCM+ (STAR). The master branch version of CTF (pulled May 5, 2017 – Reference 2) was utilized for all CTF analyses performed as part of this milestone. The statistical and VVUQ components of the Hi2Lo framework were performed using Dakota version 6.6 (release date May 15, 2017 – Reference 3). Experimental data from Westinghouse Electric Company (WEC – Reference 4) was used throughout the demonstrated process to compare with the high-fidelity STAR results. A CTF parameter called Beta was chosen as the calibration parameter for this work. By default, Beta is defined as a constant mixing coefficient in CTF and is essentially a tuning parameter for mixing between subchannels. Since CTF does not have turbulence models like STAR, Beta is the parameter that performs the most similar function to the turbulence models in STAR. The purpose of the work performed in this milestone is to tune Beta to an optimal value that brings the CTF results closer to those measured in the WEC experiments.« less

ASC Tri-lab Co-design Level 2 Milestone Report 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hornung, Rich; Jones, Holger; Keasler, Jeff

2015-09-23

In 2015, the three Department of Energy (DOE) National Laboratories that make up the Advanced Sci- enti c Computing (ASC) Program (Sandia, Lawrence Livermore, and Los Alamos) collaboratively explored performance portability programming environments in the context of several ASC co-design proxy applica- tions as part of a tri-lab L2 milestone executed by the co-design teams at each laboratory. The programming environments that were studied included Kokkos (developed at Sandia), RAJA (LLNL), and Legion (Stan- ford University). The proxy apps studied included: miniAero, LULESH, CoMD, Kripke, and SNAP. These programming models and proxy-apps are described herein. Each lab focused on amore » particular combination of abstractions and proxy apps, with the goal of assessing performance portability using those. Performance portability was determined by: a) the ability to run a single application source code on multiple advanced architectures, b) comparing runtime performance between \

Targeted Feedback in the Milestones Era: Utilization of the Ask-Tell-Ask Feedback Model to Promote Reflection and Self-Assessment.

PubMed

French, Judith C; Colbert, Colleen Y; Pien, Lily C; Dannefer, Elaine F; Taylor, Christine A

2015-01-01

The Accreditation Council for Graduate Medical Education's Milestones Project focuses trainee education on the formation of valued behaviors and skills believed to be necessary for trainees to become independent practitioners. The development and refinement of behaviors and skills outlined within the milestones will require learners to monitor, reflect, and assess their own performance over time. External feedback provides an opportunity for learners to recalibrate their self-assessments, thereby enabling them to develop better self-monitoring and self-assessment skills. Yet, feedback to trainees is frequently generic, such as "great job," "nice work," or "you need to read more." In this article, we describe a feedback model that faculty can use to provide specific feedback, while increasing accountability for learners. We offer practical examples of its use in a variety of settings in the milestone era. The Ask-Tell-Ask (ATA) patient communication skills strategy, which was adapted for use as a trainee feedback model 10 years ago at our institution, is a learner-centered approach for reinforcing and modifying behaviors. The model is efficient, promotes learner accountability, and helps trainees develop reflection and self-assessment skills. A feedback agreement further enhances ATA by establishing a shared understanding of goals for the educational encounter. The ATA feedback model, combined with a feedback agreement, encourages learners to self-identify strengths and areas for improvement, before receiving feedback. Personal monitoring, reflection, self-assessment, and increased accountability make ATA an ideal learner-centered feedback model for the milestones era, which focuses on performance improvement over time. We believe the introduction of the ATA feedback model in surgical training programs is a step in the right direction towards meaningful programmatic culture change. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Automated fiber placement: Evolution and current demonstrations

NASA Technical Reports Server (NTRS)

Grant, Carroll G.; Benson, Vernon M.

1993-01-01

The automated fiber placement process has been in development at Hercules since 1980. Fiber placement is being developed specifically for aircraft and other high performance structural applications. Several major milestones have been achieved during process development. These milestones are discussed in this paper. The automated fiber placement process is currently being demonstrated on the NASA ACT program. All demonstration projects to date have focused on fiber placement of transport aircraft fuselage structures. Hercules has worked closely with Boeing and Douglas on these demonstration projects. This paper gives a description of demonstration projects and results achieved.

Guide to DCP Study Close-Out: Milestones and Tasks | Division of Cancer Prevention

Cancer.gov

This guide assists Consortium Lead Organization (CLO) planning for DCP study close-out. Study close-out tasks are organized under milestones, which help mark progress toward completion of the close-out process. Once tasks associated with a milestone are underway, planning for the next milestone may begin. Click on a milestone to view the associated close-out tasks. |

Variations in Sexual Identity Milestones among Lesbians, Gay Men and Bisexuals

PubMed Central

Martos, Alexander; Nezhad, Sheila; Meyer, Ilan H.

2016-01-01

Despite a large body of literature covering sexual identity development milestones, we know little about differences or similarities in patterns of identity development among subgroups of the lesbian, gay, and bisexual (LGB) population. For this study, we assessed identity milestones for 396 LGB New Yorkers, ages 18–59. Sexual identity and disclosure milestones, were measured across gender, sexual identity, race/ethnicity, and age cohort subgroups of the LGB sample. Men experienced most sexual identity milestones earlier than women, but they tended to take more time between milestones. LGBs in younger age cohorts experienced sexual identity milestones and disclosure milestones earlier than the older cohorts. Bisexual people experienced sexual identity and disclosure milestones later than gay and lesbian people. Timing of coming out milestones did not differ by race/ethnicity. By comparing differences within subpopulations, the results of this study help build understanding of the varied identity development experiences of people who are often referred to collectively as “the LGB community.” LGB people face unique health and social challenges; a more complete understanding of variations among LGB people allows health professionals and social service providers to provide services that better fit the needs of LGB communities. PMID:27695579

Internal Medicine Residents' Perspectives on Receiving Feedback in Milestone Format

PubMed Central

Angus, Steven; Moriarty, John; Nardino, Robert J.; Chmielewski, Amy; Rosenblum, Michael J.

2015-01-01

Background In contrast to historical feedback, which was vague or provided residents' numerical scores without clear meaning, milestone-based feedback is focused on specific knowledge, skills, and behaviors that define developmental trajectory. It was anticipated that residents would welcome the more specific and actionable feedback provided by the milestone framework, but this has not been studied. Objective We assessed internal medicine (IM) residents' perceptions of receiving feedback in the milestone framework, particularly assessing perception of the utility of milestone-based feedback compared to non–milestone-based feedback. Methods We surveyed a total of 510 IM residents from 7 institutions. Survey questions assessed resident perception of milestone feedback in identifying strengths, weaknesses, and trajectory of professional development. Postgraduate years 2 and 3 (PGY-2 and PGY-3) residents were asked to compare milestones with prior methods of feedback. Results Of 510 residents, 356 (69.8%) responded. Slightly less than half of the residents found milestone-based feedback “extremely useful” or “very useful” in identifying strengths (44%), weaknesses (43%), specific areas for improvement (45%), and appropriate education progress (48%). Few residents found such feedback “not very useful” or “not at all useful” in these domains. A total of 51% of PGY-2 and PGY-3 residents agreed that receiving milestone-based feedback was more helpful than previous forms of feedback. Conclusions IM residents are aware of the concepts of milestones, and half of the residents surveyed found milestone feedback more helpful than previous forms of feedback. More work needs to be done to understand how milestone-based feedback could be delivered more effectively to enhance resident development. PMID:26221438

Science of health care delivery milestones for undergraduate medical education.

PubMed

Havyer, Rachel D; Norby, Suzanne M; Leep Hunderfund, Andrea N; Starr, Stephanie R; Lang, Tara R; Wolanskyj, Alexandra P; Reed, Darcy A

2017-08-25

The changing healthcare landscape requires physicians to develop new knowledge and skills such as high-value care, systems improvement, population health, and team-based care, which together may be referred to as the Science of Health Care Delivery (SHCD). To engender public trust and confidence, educators must be able to meaningfully assess physicians' abilities in SHCD. We aimed to develop a novel set of SHCD milestones based on published Accreditation Council for Graduate Medical Education (ACGME) milestones that can be used by medical schools to assess medical students' competence in SHCD. We reviewed all ACGME milestones for 25 specialties available in September 2013. We used an iterative, qualitative process to group the ACGME milestones into SHCD content domains, from which SHCD milestones were derived. The SHCD milestones were categorized within the current ACGME core competencies and were also mapped to Association of American Medical Colleges' Entrustable Professional Activities (AAMC EPAs). Fifteen SHCD sub-competencies and corresponding milestones are provided, grouped within ACGME core competencies and mapped to multiple AAMC EPAs. This novel set of milestones, grounded within the existing ACGME competencies, defines fundamental expectations within SHCD that can be used and adapted by medical schools in the assessment of medical students in this emerging curricular area. These milestones provide a blueprint for SHCD content and assessment as ongoing revisions to milestones and curricula occur.

Competent for Unsupervised Practice: Use of Pediatric Residency Training Milestones to Assess Readiness.

PubMed

Li, Su-Ting T; Tancredi, Daniel J; Schwartz, Alan; Guillot, Ann P; Burke, Ann E; Trimm, R Franklin; Guralnick, Susan; Mahan, John D; Gifford, Kimberly A

2017-03-01

To describe clinical skills progression during pediatric residency using the distribution of pediatric milestone assessments by subcompetency and year of training and to determine reasonable milestone expectations at time of graduation. Multi-institutional cohort study of the milestones reported to the Accreditation Council for Graduate Medical Education for all 21 pediatric subcompetencies. Most subcompetencies were measured using five milestone levels (1 = novice, 2 = advanced beginner, 3 = competent, 4 = proficient, 5 = master); 3 subcompetencies had only four levels defined. Milestone assessments for 2,030 pediatric residents in 47 programs during academic year 2013-2014 were obtained. There was significant variation in end-of-year milestone ratings for residents within each level of training, which decreased as training level increased. Most (78.9%; 434/550) graduating third-year pediatric residents received a milestone rating of ≥ 3 in all 21 subcompetencies; fewer (21.1%; 116/550) received a rating of ≥ 4 in all subcompetencies. Across all training levels, professionalism and interpersonal communication skills were rated highest; quality improvement was rated lowest. Trainees entered residency with a wide range of skills. As they advanced, skill variability within a training level decreased. Most graduating pediatric residents were still advancing on the milestone continuum toward proficiency and mastery, and an expectation of milestone ratings ≥ 4 in all categories upon graduation is unrealistic; milestone ratings ≥ 3 upon graduation may be more realistic. Understanding current pediatric residents' and graduates' skills can help to identify key areas that should be specifically targeted during training.

SOFIA's secondary mirror assembly: in-flight performance and control approach

NASA Astrophysics Data System (ADS)

Reinacher, Andreas; Lammen, Yannick; Roeser, Hans-Peter

2016-08-01

The Stratospheric Observatory for Infrared Astronomy (SOFIA) is a 2.5m infrared telescope built into a Boeing 747 SP. In 2014 SOFIA reached its Full Operational Capability milestone and nowadays takes off about three times a week to observe the infrared sky from altitudes above most of the atmosphere's water vapor content. An actively controlled 352mm SiC secondary mirror is used for infrared chopping with peak-to-peak amplitudes of up to 10 arcmin and chop frequencies of up to 20Hz and also as actuator for fast pointing corrections. The Swiss-made Secondary Mirror Mechanism (SMM) is a complex, highly integrated and compact flexure based mechanism that has been performing with remarkable reliability during recent years. Above mentioned capabilities are provided by the Tilt Chopper Mechanism (TCM) which is one of the two stages of the SMM. In addition the SMM is also used to establish a collimated telescope and to adjust the telescope focus depending on the structure's temperature which ranges from about 40°C at takeoff in Palmdale, CA to about -40°C in the stratosphere. This is achieved with the Focus Center Mechanism (FCM) which is the base stage of the SMM on which the TCM is situated. Initially the TCM was affected by strong vibrations at about 300 Hz which led to unacceptable image smearing. After some adjustments to the PID-type controller it was finally decided to develop a completely new control algorithm in state space. This pole placement controller matches the closed loop system poles to those of a Bessel filter with a corner frequency of 120 Hz for optimal square wave behavior. To reduce noise present on the position and current sensors and to estimate the velocity a static gain Kalman Filter was designed and implemented. A system inherent delay is incorporated in the Kalman filter design and measures were applied to counteract the actuators' hysteresis. For better performance over the full operational temperature range and to represent an amplitude dependent non-linearity the underlying model of the Kalman filter adapts in real-time to those two parameters. This highly specialized controller was developed over the course of years and only the final design is introduced here. The main intention of this contribution is to present the currently achieved performance of the SOFIA chopper over the full amplitude, frequency, and temperature range. Therefore a range of data gathered during in-flight tests aboard SOFIA is displayed and explained. The SMM's three main performance parameters are the transition time between two chop positions, the stability of the Secondary Mirror when exposed to the low pressures, low temperatures, aerodynamic, and aeroacoustic excitations present when the SOFIA observatory operates in the stratosphere at speeds of up to 850 km/h, and finally the closed-loop bandwidth available for fast pointing corrections.

Natural language acquisition in large scale neural semantic networks

NASA Astrophysics Data System (ADS)

Ealey, Douglas

This thesis puts forward the view that a purely signal- based approach to natural language processing is both plausible and desirable. By questioning the veracity of symbolic representations of meaning, it argues for a unified, non-symbolic model of knowledge representation that is both biologically plausible and, potentially, highly efficient. Processes to generate a grounded, neural form of this model-dubbed the semantic filter-are discussed. The combined effects of local neural organisation, coincident with perceptual maturation, are used to hypothesise its nature. This theoretical model is then validated in light of a number of fundamental neurological constraints and milestones. The mechanisms of semantic and episodic development that the model predicts are then used to explain linguistic properties, such as propositions and verbs, syntax and scripting. To mimic the growth of locally densely connected structures upon an unbounded neural substrate, a system is developed that can grow arbitrarily large, data- dependant structures composed of individual self- organising neural networks. The maturational nature of the data used results in a structure in which the perception of concepts is refined by the networks, but demarcated by subsequent structure. As a consequence, the overall structure shows significant memory and computational benefits, as predicted by the cognitive and neural models. Furthermore, the localised nature of the neural architecture also avoids the increasing error sensitivity and redundancy of traditional systems as the training domain grows. The semantic and episodic filters have been demonstrated to perform as well, or better, than more specialist networks, whilst using significantly larger vocabularies, more complex sentence forms and more natural corpora.

FY17 CSSE L2 Milestone Report: Analyzing Power Usage Characteristics of Workloads Running on Trinity.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pedretti, Kevin

This report summarizes the work performed as part of a FY17 CSSE L2 milestone to in- vestigate the power usage behavior of ASC workloads running on the ATS-1 Trinity plat- form. Techniques were developed to instrument application code regions of interest using the Power API together with the Kokkos profiling interface and Caliper annotation library. Experiments were performed to understand the power usage behavior of mini-applications and the SNL/ATDM SPARC application running on ATS-1 Trinity Haswell and Knights Landing compute nodes. A taxonomy of power measurement approaches was identified and presented, providing a guide for application developers to follow. Controlledmore » scaling study experiments were performed on up to 2048 nodes of Trinity along with smaller scale ex- periments on Trinity testbed systems. Additionally, power and energy system monitoring information from Trinity was collected and archived for post analysis of "in-the-wild" work- loads. Results were analyzed to assess the sensitivity of the workloads to ATS-1 compute node type (Haswell vs. Knights Landing), CPU frequency control, node-level power capping control, OpenMP configuration, Knights Landing on-package memory configuration, and algorithm/solver configuration. Overall, this milestone lays groundwork for addressing the long-term goal of determining how to best use and operate future ASC platforms to achieve the greatest benefit subject to a constrained power budget.« less

Navigating the Next Accreditation System: A Dashboard for the Milestones.

PubMed

Johna, Samir; Woodward, Brandon

2015-01-01

In July 2014, all residency programs accredited by the Accreditation Council for Graduate Medical Education (ACGME) were enrolled in a new system called the Next Accreditation System. Residency programs may not be clear on how best to comply with these new accreditation requirements. Large amounts of data must be collected, evaluated, and submitted twice a year to the council's Web-based data collection system. One challenge is that the new "end-of-rotation" evaluations must reflect specialty-specific milestones, on which many faculty members are not well versed. Like other residency programs, we tried to address the challenges using our local resources. We used our existing electronic goals and objectives for each rotation coupled with appropriate end-of-rotation evaluations reflecting the specialty-specific milestones through a process of editing and mapping. Data extracted from these evaluations were added to an interactive dashboard that also contained evaluations on additional program-specific modifiers of residents' performance. A resident's final overall performance was visually represented on a plot graph. The novel dashboard included features to save evaluations for future comparisons and to track residents' progress during their entire training. It proved simple to use and was able to reduce the time needed for each resident evaluation to 5 to 10 minutes. This tool has made it much easier and less challenging for the members of our Clinical Competency Committee to start deliberation about each resident's performance.

The Milestones Passport: A Learner-Centered Application of the Milestone Framework to Prompt Real-Time Feedback in the Emergency Department.

PubMed

Yarris, Lalena M; Jones, David; Kornegay, Joshua G; Hansen, Matthew

2014-09-01

In July 2013, emergency medicine residency programs implemented the Milestone assessment as part of the Next Accreditation System. We hypothesized that applying the Milestone framework to real-time feedback in the emergency department (ED) could affect current feedback processes and culture. We describe the development and implementation of a Milestone-based, learner-centered intervention designed to prompt real-time feedback in the ED. We developed and implemented the Milestones Passport, a feedback intervention incorporating subcompetencies, in our residency program in July 2013. Our primary outcomes were feasibility, including faculty and staff time and costs, number of documented feedback encounters in the first 2 months of implementation, and user-reported time required to complete the intervention. We also assessed learner and faculty acceptability. Development and implementation of the Milestones Passport required 10 hours of program coordinator time, 120 hours of software developer time, and 20 hours of faculty time. Twenty-eight residents and 34 faculty members generated 257 Milestones Passport feedback encounters. Most residents and faculty reported that the encounters required fewer than 5 minutes to complete, and 48% (12 of 25) of the residents and 68% (19 of 28) of faculty reported satisfaction with the Milestones Passport intervention. Faculty satisfaction with overall feedback in the ED improved after the intervention (93% versus 54%, P  =  .003), whereas resident satisfaction with feedback did not change significantly. The Milestones Passport feedback intervention was feasible and acceptable to users; however, learner satisfaction with the Milestone assessment in the ED was modest.

Preparing medical students for obstetrics and gynecology milestone level one: a description of a pilot curriculum

PubMed Central

Morgan, Helen; Marzano, David; Lanham, Michael; Stein, Tamara; Curran, Diana; Hammoud, Maya

2014-01-01

Background The implementation of the Accreditation Council for Graduate Medical Education (ACGME) Milestones in the field of obstetrics and gynecology has arrived with Milestones Level One defined as the level expected of an incoming first-year resident. Purpose We designed, implemented, and evaluated a 4-week elective for fourth-year medical school students, which utilized a multimodal approach to teaching and assessing the Milestones Level One competencies. Methods The 78-hour curriculum utilized traditional didactic lectures, flipped classroom active learning sessions, a simulated paging curriculum, simulation training, embalmed cadaver anatomical dissections, and fresh-frozen cadaver operative procedures. We performed an assessment of student knowledge and surgical skills before and after completion of the course. Students also received feedback on their assessment and management of eight simulated paging scenarios. Students completed course content satisfaction surveys at the completion of each of the 4 weeks. Results Students demonstrated improvement in knowledge and surgical skills at the completion of the course. Paging confidence trended toward improvement at the completion of the course. Student satisfaction was high for all of the course content, and the active learning components of the curriculum (flipped classroom, simulation, and anatomy sessions) had higher scores than the traditional didactics in all six categories of our student satisfaction survey. Conclusions This pilot study demonstrates a practical approach for preparing fourth-year medical students for the expectations of Milestones Level One in obstetrics and gynecology. This curriculum can serve as a framework as medical schools and specific specialties work to meet the first steps of the ACGME's Next Accreditation System. PMID:25430640

Developing competencies for pediatric hospice and palliative medicine.

PubMed

Klick, Jeffrey C; Friebert, Sarah; Hutton, Nancy; Osenga, Kaci; Pituch, Kenneth J; Vesel, Tamara; Weidner, Norbert; Block, Susan D; Morrison, Laura J

2014-12-01

In 2006, hospice and palliative medicine (HPM) became an officially recognized subspecialty. This designation helped initiate the Accreditation Council of Graduate Medical Education Outcomes Project in HPM. As part of this process, a group of expert clinician-educators in HPM defined the initial competency-based outcomes for HPM fellows (General HPM Competencies). Concurrently, these experts recognized and acknowledged that additional expertise in pediatric HPM would ensure that the competencies for pediatric HPM were optimally represented. To fill this gap, a group of pediatric HPM experts used a product development method to define specific Pediatric HPM Competencies. This article describes the development process. With the ongoing evolution of HPM, these competencies will evolve. As part of the Next Accreditation System, the Accreditation Council of Graduate Medical Education uses milestones as a framework to better define competency-based, measurable outcomes for trainees. Currently, there are no milestones specific to HPM, although the field is designing curricular milestones with multispecialty involvement, including pediatrics. These competencies are the conceptual framework for the pediatric content in the HPM milestones. They are specific to the pediatric HPM subspecialist and should be integrated into the training of pediatric HPM subspecialists. They will serve a foundational role in HPM and should inform a wide range of emerging innovations, including the next evolution of HPM Competencies, development of HPM curricular milestones, and training of adult HPM and other pediatric subspecialists. They may also inform pediatric HPM outcome measures, as well as standards of practice and performance for pediatric HPM interdisciplinary teams. Copyright © 2014 by the American Academy of Pediatrics.

The ordering of milestones in language development for children from 1 to 6 years of age.

PubMed

Luinge, Margreet R; Post, Wendy J; Wit, Hero P; Goorhuis-Brouwer, Sieneke M

2006-10-01

To scale language milestones in a group of 527 children to provide an instrument for screening language development. Procedure The questionnaire regarding these milestones was completed by parental report. It was evaluated whether the scaled milestones satisfied the assumptions of the Mokken item response model. The scalability of the final scale of 14 milestones was strong (H = .95), its reliability was high (rho = .96), and it satisfied the assumptions of the Mokken model. A single, unidimensional scale of diverse milestones was developed. It taps lexical, syntactic, and phonological skills, as well as both receptive and expressive language skills, and is well suited for mapping progress in language ability.

Charting the Road to Competence: Developmental Milestones for Internal Medicine Residency Training

PubMed Central

Green, Michael L.; Aagaard, Eva M.; Caverzagie, Kelly J.; Chick, Davoren A.; Holmboe, Eric; Kane, Gregory; Smith, Cynthia D.; Iobst, William

2009-01-01

Background The Accreditation Council for Graduate Medical Education (ACGME) Outcome Project requires that residency program directors objectively document that their residents achieve competence in 6 general dimensions of practice. Intervention In November 2007, the American Board of Internal Medicine (ABIM) and the ACGME initiated the development of milestones for internal medicine residency training. ABIM and ACGME convened a 33-member milestones task force made up of program directors, experts in evaluation and quality, and representatives of internal medicine stakeholder organizations. This article reports on the development process and the resulting list of proposed milestones for each ACGME competency. Outcomes The task force adopted the Dreyfus model of skill acquisition as a framework the internal medicine milestones, and calibrated the milestones with the expectation that residents achieve, at a minimum, the “competency” level in the 5-step progression by the completion of residency. The task force also developed general recommendations for strategies to evaluate the milestones. Discussion The milestones resulting from this effort will promote competency-based resident education in internal medicine, and will allow program directors to track the progress of residents and inform decisions regarding promotion and readiness for independent practice. In addition, the milestones may guide curriculum development, suggest specific assessment strategies, provide benchmarks for resident self-directed assessment-seeking, and assist remediation by facilitating identification of specific deficits. Finally, by making explicit the profession's expectations for graduates and providing a degree of national standardization in evaluation, the milestones may improve public accountability for residency training. PMID:21975701

The Milestones Passport: A Learner-Centered Application of the Milestone Framework to Prompt Real-Time Feedback in the Emergency Department

PubMed Central

Yarris, Lalena M.; Jones, David; Kornegay, Joshua G.; Hansen, Matthew

2014-01-01

Background In July 2013, emergency medicine residency programs implemented the Milestone assessment as part of the Next Accreditation System. Objective We hypothesized that applying the Milestone framework to real-time feedback in the emergency department (ED) could affect current feedback processes and culture. We describe the development and implementation of a Milestone-based, learner-centered intervention designed to prompt real-time feedback in the ED. Methods We developed and implemented the Milestones Passport, a feedback intervention incorporating subcompetencies, in our residency program in July 2013. Our primary outcomes were feasibility, including faculty and staff time and costs, number of documented feedback encounters in the first 2 months of implementation, and user-reported time required to complete the intervention. We also assessed learner and faculty acceptability. Results Development and implementation of the Milestones Passport required 10 hours of program coordinator time, 120 hours of software developer time, and 20 hours of faculty time. Twenty-eight residents and 34 faculty members generated 257 Milestones Passport feedback encounters. Most residents and faculty reported that the encounters required fewer than 5 minutes to complete, and 48% (12 of 25) of the residents and 68% (19 of 28) of faculty reported satisfaction with the Milestones Passport intervention. Faculty satisfaction with overall feedback in the ED improved after the intervention (93% versus 54%, P  =  .003), whereas resident satisfaction with feedback did not change significantly. Conclusions The Milestones Passport feedback intervention was feasible and acceptable to users; however, learner satisfaction with the Milestone assessment in the ED was modest. PMID:26279784

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christon, Mark A.; Baksoi, Jozsef; Barnett, Nathan

This report describes the work carried out for completion of the Thermal Hydraulics Methods (THM) Level 2 Milestone THM.CFD.P5.01 for the Consortium for Advanced Simulation of Light Water Reactors (CASL). This milestone focused primarily on the initial integration of Hydra-TH in VERA. The primary objective for this milestone was the integration of Hydra-TH as a standalone executable in VERA. A series of code extensions/modifications have been made to Hydra-TH to facilitate integration of Hydra-TH in VERA and to permit future tighter integration and physics coupling. A total of 61 serial and 64 parallel regression tests have been supplied with Hydra-TH.more » These tests are are being executed in the TriBITS environment. Once the VERA team enables the full suite of tests, the results can be posted to the VERA CDash site. Future work will consider the use of the LIME 2.0 interface for tighter integration in VERA with additional efforts focused on multiphysics coupling with radiation transport, fuel performance, and solid/structural mechanics.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilkey, Lindsay

This milestone presents a demonstration of the High-to-Low (Hi2Lo) process in the VVI focus area. Validation and additional calculations with the commercial computational fluid dynamics code, STAR-CCM+, were performed using a 5x5 fuel assembly with non-mixing geometry and spacer grids. This geometry was based on the benchmark experiment provided by Westinghouse. Results from the simulations were compared to existing experimental data and to the subchannel thermal-hydraulics code COBRA-TF (CTF). An uncertainty quantification (UQ) process was developed for the STAR-CCM+ model and results of the STAR UQ were communicated to CTF. Results from STAR-CCM+ simulations were used as experimental design pointsmore » in CTF to calibrate the mixing parameter β and compared to results obtained using experimental data points. This demonstrated that CTF’s β parameter can be calibrated to match existing experimental data more closely. The Hi2Lo process for the STAR-CCM+/CTF code coupling was documented in this milestone and closely linked L3:VVI.H2LP15.01 milestone report.« less

The SGI/CRAY T3E: Experiences and Insights

NASA Technical Reports Server (NTRS)

Bernard, Lisa Hamet

1999-01-01

The focus of the HPCC Earth and Space Sciences (ESS) Project is capability computing - pushing highly scalable computing testbeds to their performance limits. The drivers of this focus are the Grand Challenge problems in Earth and space science: those that could not be addressed in a capacity computing environment where large jobs must continually compete for resources. These Grand Challenge codes require a high degree of communication, large memory, and very large I/O (throughout the duration of the processing, not just in loading initial conditions and saving final results). This set of parameters led to the selection of an SGI/Cray T3E as the current ESS Computing Testbed. The T3E at the Goddard Space Flight Center is a unique computational resource within NASA. As such, it must be managed to effectively support the diverse research efforts across the NASA research community yet still enable the ESS Grand Challenge Investigator teams to achieve their performance milestones, for which the system was intended. To date, all Grand Challenge Investigator teams have achieved the 10 GFLOPS milestone, eight of nine have achieved the 50 GFLOPS milestone, and three have achieved the 100 GFLOPS milestone. In addition, many technical papers have been published highlighting results achieved on the NASA T3E, including some at this Workshop. The successes enabled by the NASA T3E computing environment are best illustrated by the 512 PE upgrade funded by the NASA Earth Science Enterprise earlier this year. Never before has an HPCC computing testbed been so well received by the general NASA science community that it was deemed critical to the success of a core NASA science effort. NASA looks forward to many more success stories before the conclusion of the NASA-SGI/Cray cooperative agreement in June 1999.

Statistical Analysis of Categorical Time Series of Atmospheric Elementary Circulation Mechanisms - Dzerdzeevski Classification for the Northern Hemisphere

PubMed Central

Brenčič, Mihael

2016-01-01

Northern hemisphere elementary circulation mechanisms, defined with the Dzerdzeevski classification and published on a daily basis from 1899–2012, are analysed with statistical methods as continuous categorical time series. Classification consists of 41 elementary circulation mechanisms (ECM), which are assigned to calendar days. Empirical marginal probabilities of each ECM were determined. Seasonality and the periodicity effect were investigated with moving dispersion filters and randomisation procedure on the ECM categories as well as with the time analyses of the ECM mode. The time series were determined as being non-stationary with strong time-dependent trends. During the investigated period, periodicity interchanges with periods when no seasonality is present. In the time series structure, the strongest division is visible at the milestone of 1986, showing that the atmospheric circulation pattern reflected in the ECM has significantly changed. This change is result of the change in the frequency of ECM categories; before 1986, the appearance of ECM was more diverse, and afterwards fewer ECMs appear. The statistical approach applied to the categorical climatic time series opens up new potential insight into climate variability and change studies that have to be performed in the future. PMID:27116375

Statistical Analysis of Categorical Time Series of Atmospheric Elementary Circulation Mechanisms - Dzerdzeevski Classification for the Northern Hemisphere.

PubMed

Brenčič, Mihael

2016-01-01

Northern hemisphere elementary circulation mechanisms, defined with the Dzerdzeevski classification and published on a daily basis from 1899-2012, are analysed with statistical methods as continuous categorical time series. Classification consists of 41 elementary circulation mechanisms (ECM), which are assigned to calendar days. Empirical marginal probabilities of each ECM were determined. Seasonality and the periodicity effect were investigated with moving dispersion filters and randomisation procedure on the ECM categories as well as with the time analyses of the ECM mode. The time series were determined as being non-stationary with strong time-dependent trends. During the investigated period, periodicity interchanges with periods when no seasonality is present. In the time series structure, the strongest division is visible at the milestone of 1986, showing that the atmospheric circulation pattern reflected in the ECM has significantly changed. This change is result of the change in the frequency of ECM categories; before 1986, the appearance of ECM was more diverse, and afterwards fewer ECMs appear. The statistical approach applied to the categorical climatic time series opens up new potential insight into climate variability and change studies that have to be performed in the future.

Milestones: Critical Elements in Clinical Informatics Fellowship Programs

PubMed Central

Lehmann, Christoph U.; Munger, Benson

2016-01-01

Summary Background Milestones refer to points along a continuum of a competency from novice to expert. Resident and fellow assessment and program evaluation processes adopted by the ACGME include the mandate that programs report the educational progress of residents and fellows twice annually utilizing Milestones developed by a specialty specific ACGME working group of experts. Milestones in clinical training programs are largely unmapped to specific assessment tools. Residents and fellows are mainly assessed using locally derived assessment instruments. These assessments are then reviewed by the Clinical Competency Committee which assigns and reports trainee ratings using the specialty specific reporting Milestones. Methods and Results The challenge and opportunity facing the nascent specialty of Clinical Informatics is how to optimally utilize this framework across a growing number of accredited fellowships. The authors review how a mapped milestone framework, in which each required sub-competency is mapped to a single milestone assessment grid, can enable the use of milestones for multiple uses including individualized learning plans, fellow assessments, and program evaluation. Furthermore, such a mapped strategy will foster the ability to compare fellow progress within and between Clinical Informatics Fellowships in a structured and reliable fashion. Clinical Informatics currently has far less variability across programs and thus could easily utilize a more tightly defined set of milestones with a clear mapping to sub-competencies. This approach would enable greater standardization of assessment instruments and processes across programs while allowing for variability in how those sub-competencies are taught. Conclusions A mapped strategy for Milestones offers significant advantages for Clinical Informatics programs. PMID:27081414

A Multi-center Milestone Study of Clinical Vertebral CT Segmentation

PubMed Central

Yao, Jianhua; Burns, Joseph E.; Forsberg, Daniel; Seitel, Alexander; Rasoulian, Abtin; Abolmaesumi, Purang; Hammernik, Kerstin; Urschler, Martin; Ibragimov, Bulat; Korez, Robert; Vrtovec, Tomaž; Castro-Mateos, Isaac; Pozo, Jose M.; Frangi, Alejandro F.; Summers, Ronald M.; Li, Shuo

2017-01-01

A multiple center milestone study of clinical vertebra segmentation is presented in this paper. Vertebra segmentation is a fundamental step for spinal image analysis and intervention. The first half of the study was conducted in the spine segmentation challenge in 2014 International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI) Workshop on Computational Spine Imaging (CSI 2014). The objective was to evaluate the performance of several state-of-the-art vertebra segmentation algorithms on computed tomography (CT) scans using ten training and five testing dataset, all healthy cases; the second half of the study was conducted after the challenge, where additional 5 abnormal cases are used for testing to evaluate the performance under abnormal cases. Dice coefficients and absolute surface distances were used as evaluation metrics. Segmentation of each vertebra as a single geometric unit, as well as separate segmentation of vertebra substructures, was evaluated. Five teams participated in the comparative study. The top performers in the study achieved Dice coefficient of 0.93 in the upper thoracic, 0.95 in the lower thoracic and 0.96 in the lumbar spine for healthy cases, and 0.88 in the upper thoracic, 0.89 in the lower thoracic and 0.92 in the lumbar spine for osteoporotic and fractured cases. The strengths and weaknesses of each method as well as future suggestion for improvement are discussed. This is the first multi-center comparative study for vertebra segmentation methods, which will provide an up-to-date performance milestone for the fast growing spinal image analysis and intervention. PMID:26878138

Milestone achievement in emerging adulthood in spina bifida: a longitudinal investigation of parental expectations

PubMed Central

Holbein, Christina E; Zebracki, Kathy; Bechtel, Colleen F; Papadakis, Jaclyn Lennon; Bruno, Elizabeth Franks; Holmbeck, Grayson N

2016-01-01

Aim To assess changes over time in parents' expectations of adult milestone achievement (college attendance, full-time job attainment, independent living, marriage, parenthood) for young people with spina bifida, to examine how expectancies relate to actual milestone achievement, and to compare milestone achievement in emerging adults with spina bifida with that of peers with typical development. Method Sixty-eight families of children with spina bifida (mean=8.34y, 37 male, 31 female) and 68 families of children with typical development (mean=8.49y, 37 male, 31 female) participated at Time 1. At all subsequent timepoints, parents of young people with spina bifida were asked to rate their expectations of emerging adulthood milestone achievement. At Time 7, when participants were 22 to 23 years old, milestone achievement was assessed. Results Parents of young people with spina bifida lowered their expectations over time for most milestones; parents of children with higher cognitive ability reported decreases of lower magnitude. Parent expectancies were optimistic and unrelated to actual milestone achievement. Emerging adults with spina bifida were less likely than individuals with typical development to achieve all milestones. Interpretation Optimistic parental expectations may be adaptive for children with spina bifida and their families, although it is important for families to set realistic goals. Healthcare providers serve a key role in helping families of young people with spina bifida prepare for emerging adulthood. PMID:27651215

Emotional intelligence in surgery is associated with resident job satisfaction.

PubMed

Hollis, Robert H; Theiss, Lauren M; Gullick, Allison A; Richman, Joshua S; Morris, Melanie S; Grams, Jayleen M; Porterfield, John R; Chu, Daniel I

2017-03-01

Emotional intelligence (EI) has been associated with improved work performance and job satisfaction in several industries. We evaluated whether EI was associated with higher measures of work performance and job satisfaction in surgical residents. We distributed the validated Trait EI Questionnaire and job satisfaction survey to all general surgery residents at a single institution in 2015. EI and job satisfaction scores were compared with resident performance using faculty evaluations of clinical competency-based surgical milestones and standardized test scores including the United States Medical Licensing Examination (USMLE) and American Board of Surgery In-Training Examination (ABSITE). Statistical comparison was made using Pearson correlation and simple linear regression adjusting for postgraduate year level. The survey response rate was 68.9% with 31 resident participants. Global EI was associated with scores on USMLE Step 2 (r = 0.46, P = 0.01) and Step 3 (r = 0.54, P = 0.01) but not ABSITE percentile scores (r = 0.06, P = 0.77). None of the 16 surgical milestone scores were significantly associated with global EI or EI factors before or after adjustment for postgraduate level. Global EI was associated with overall job satisfaction (r = 0.37, P = 0.04). Of the facets of job satisfaction, global EI was significantly associated with views of supervision (r = 0.42, P = 0.02) and nature of work (r = 0.41, P = 0.02). EI was associated with job satisfaction and USMLE performance but not ACGME competency-based milestones or ABSITE scores. EI may be an important factor for fulfillment in surgical training that is not currently captured with traditional in-training performance measures. Published by Elsevier Inc.

Report on milestones for care and support under the U.S. National Plan to Address Alzheimer's Disease.

PubMed

Borson, Soo; Boustani, Malaz A; Buckwalter, Kathleen C; Burgio, Louis D; Chodosh, Joshua; Fortinsky, Richard H; Gifford, David R; Gwyther, Lisa P; Koren, Mary Jane; Lynn, Joanne; Phillips, Cheryl; Roherty, Martha; Ronch, Judah; Stahl, Claudia; Rodgers, Lauren; Kim, Hye; Baumgart, Matthew; Geiger, Angela

2016-03-01

Under the U.S. national Alzheimer's plan, the National Institutes of Health identified milestones required to meet the plan's biomedical research goal (Goal 1). However, similar milestones have not been created for the goals on care (Goal 2) and support (Goal 3). The Alzheimer's Association convened a workgroup with expertise in clinical care, long-term services and supports, dementia care and support research, and public policy. The workgroup reviewed the literature on Alzheimer's care and support; reviewed how other countries are addressing the issue; and identified public policies needed over the next 10 years to achieve a more ideal care and support system. The workgroup developed and recommended 73 milestones for Goal 2 and 56 milestones for Goal 3. To advance the implementation of the U.S. national Alzheimer's plan, the U.S. government should adopt these recommended milestones, or develop similar milestones, to be incorporated into the national plan. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Revisiting and Computing Reaction Coordinates with Directional Milestoning

PubMed Central

Kirmizialtin, Serdal; Elber, Ron

2011-01-01

The method of Directional Milestoning is revisited. We start from an exact and more general expression and state the conditions and validity of the memory-loss approximation. An algorithm to compute a reaction coordinate from Directional Milestoning data is presented. The reaction coordinate is calculated as a set of discrete jumps between Milestones that maximizes the flux between two stable states. As an application we consider a conformational transition in solvated Adenosine. We compare a long molecular dynamic trajectory with Directional Milestoning and discuss the differences between the maximum flux path and minimum energy coordinates. PMID:21500798

Correlations Between Ratings on the Resident Annual Evaluation Summary and the Internal Medicine Milestones and Association With ABIM Certification Examination Scores Among US Internal Medicine Residents, 2013-2014.

PubMed

Hauer, Karen E; Vandergrift, Jonathan; Hess, Brian; Lipner, Rebecca S; Holmboe, Eric S; Hood, Sarah; Iobst, William; Hamstra, Stanley J; McDonald, Furman S

2016-12-06

US internal medicine residency programs are now required to rate residents using milestones. Evidence of validity of milestone ratings is needed. To compare ratings of internal medicine residents using the pre-2015 resident annual evaluation summary (RAES), a nondevelopmental rating scale, with developmental milestone ratings. Cross-sectional study of US internal medicine residency programs in the 2013-2014 academic year, including 21 284 internal medicine residents (7048 postgraduate-year 1 [PGY-1], 7233 PGY-2, and 7003 PGY-3). Program director ratings on the RAES and milestone ratings. Correlations of RAES and milestone ratings by training year; correlations of medical knowledge ratings with American Board of Internal Medicine (ABIM) certification examination scores; rating of unprofessional behavior using the 2 systems. Corresponding RAES ratings and milestone ratings showed progressively higher correlations across training years, ranging among competencies from 0.31 (95% CI, 0.29 to 0.33) to 0.35 (95% CI, 0.33 to 0.37) for PGY-1 residents to 0.43 (95% CI, 0.41 to 0.45) to 0.52 (95% CI, 0.50 to 0.54) for PGY-3 residents (all P values <.05). Linear regression showed ratings differed more between PGY-1 and PGY-3 years using milestone ratings than the RAES (all P values <.001). Of the 6260 residents who attempted the certification examination, the 618 who failed had lower ratings using both systems for medical knowledge than did those who passed (RAES difference, -0.9; 95% CI, -1.0 to -0.8; P < .001; milestone medical knowledge 1 difference, -0.3; 95% CI, -0.3 to -0.3; P < .001; and medical knowledge 2 difference, -0.2; 95% CI, -0.3 to -0.2; P < .001). Of the 26 PGY-3 residents with milestone ratings indicating deficiencies on either of the 2 medical knowledge subcompetencies, 12 failed the certification examination. Correlation of RAES ratings for professionalism with residents' lowest professionalism milestone ratings was 0.44 (95% CI, 0.43 to 0.45; P < .001). Among US internal medicine residents in the 2013-2014 academic year, milestone-based ratings correlated with RAES ratings but with a greater difference across training years. Both rating systems for medical knowledge correlated with ABIM certification examination scores. Milestone ratings may better detect problems with professionalism. These preliminary findings may inform establishment of the validity of milestone-based assessment.

Level-2 Milestone 5213. CTS-1 Contract Award Completed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leininger, Matt

2015-09-24

This report documents the fact that the first commodity technology (CT) system contract award, CTS-1, has been completed. The description of the milestone is: Based on Tri-Lab CTS-1 process and review, LLNL successfully awards the procurement for the next-generation Tri-Lab Linux CTS-1. The milestone completion criterion is: Signed contract. The milestone was completed on September 24th. 2015.

Estrogen Effects after a Crush Muscle Injury and Acute Exposure to Hypobaric Hypoxia

DTIC Science & Technology

2015-03-01

15 5.0 M13 /M15/M17...technical milestones that were later combined into one milestone, known as M13 /M15/M17. Research question 5 is as follows: Will estrogen promote...muscle of mice? In Phase 2, there were three technical milestones that were later combined into one milestone, known as M13 /M15/M17. Research

Recruiting a U.S. national sample of HIV-negative gay and bisexual men to complete at-home self-administered HIV/STI testing and surveys: Challenges and Opportunities

PubMed Central

Grov, Christian; Cain, Demetria; Whitfield, Thomas H. F.; Rendina, H. Jonathon; Pawson, Mark; Ventuneac, Ana; Parsons, Jeffrey T.

2015-01-01

We describe enrollment for the One Thousand Strong panel, present characteristics of the panel relative to other large U.S. national studies of gay and bisexual men (GBM), and examine demographic and behavioral characteristics that were associated with passing enrollment milestones. A U.S. national sample of HIV-negative men were enrolled via an established online panel of over 22,000 GBM. Participants (n = 1071) passed three milestones to join our panel. Milestone 1 was screening eligible and providing informed consent. Milestone 2 involved completing an hour-long at-home computer-assisted self-interview (CASI) survey. Milestone 3 involved completing at-home self-administered rapid HIV testing and collecting/returning urine and rectal samples for gonorrhea and chlamydia testing. Compared to those who completed milestones: those not passing milestone 1 were more likely to be non-White and older; those not passing milestone 2 were less likely to have insurance or a primary care physician; and those not passing milestone 3 were less educated, more likely to be bisexual as opposed to gay, more likely to live in the Midwest, had fewer male partners in the past year, and less likely to have tested for HIV in the past year. Effect sizes for significant findings were small. We successfully enrolled a national sample of HIV-negative GBM who completed at-home CASI assessments and at-home self-administered HIV and urine and rectal STI testing. This indicates high feasibility and acceptability of incorporating self-administered biological assays into otherwise fully online studies. Differences in completion of study milestones indicate a need for further investigation into the reasons for lower engagement by certain groups. PMID:26858776

Windows of achievement for development milestones of Sri Lankan infants and toddlers: estimation through statistical modelling.

PubMed

Thalagala, N

2015-11-01

The normative age ranges during which cohorts of children achieve milestones are called windows of achievement. The patterns of these windows of achievement are known to be both genetically and environmentally dependent. This study aimed to determine the windows of achievement for motor, social emotional, language and cognitive development milestones for infants and toddlers in Sri Lanka. A set of 293 milestones identified through a literature review were subjected to content validation using parent and expert reviews, which resulted in the selection of a revised set of 277 milestones. Thereafter, a sample of 1036 children from 2 months to 30 months was examined to see whether or not they had attained the selected milestones. Percentile ages of attaining milestone were determined using a rearranged closed form equation related to the logistic regression. The parameters required for calculations were derived through the logistic regression of milestone achievement statuses against ages of children. These percentile ages were used to define the respective windows of achievement. A set of 178 robust indicators that represent motor, socio emotional, language and cognitive development skills and their windows of achievement relevant to 2 to 24 months of age were determined. Windows of achievement for six gross motor milestones determined in the study were shown to closely overlap a similar set of windows of achievement published by the World Health Organization indicating the validity of some findings. A methodology combining the content validation based on qualitative techniques and age validation based on regression modelling found to be effective for determining age percentiles for realizing milestones and determining respective windows of achievement. © 2015 John Wiley & Sons Ltd.

Benchmarking of OEM Hybrid Electric Vehicles at NREL: Milestone Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, K. J.; Rajagopalan, A.

2001-10-26

A milestone report that describes the NREL's progress and activities related to the DOE FY2001 Annual Operating Plan milestone entitled ''Benchmark 2 new production or pre-production hybrids with ADVISOR.''

Milestone achievement in emerging adulthood in spina bifida: a longitudinal investigation of parental expectations.

PubMed

Holbein, Christina E; Zebracki, Kathy; Bechtel, Colleen F; Lennon Papadakis, Jaclyn; Franks Bruno, Elizabeth; Holmbeck, Grayson N

2017-03-01

To assess changes over time in parents' expectations of adult milestone achievement (college attendance, full-time job attainment, independent living, marriage, parenthood) for young people with spina bifida, to examine how expectancies relate to actual milestone achievement, and to compare milestone achievement in emerging adults with spina bifida with that of peers with typical development. Sixty-eight families of children with spina bifida (mean age 8y 4mo, 37 males, 31 females) and 68 families of children with typical development (mean age 8y 6mo, 37 males, 31 females) participated at Time 1. At all subsequent timepoints, parents of young people with spina bifida were asked to rate their expectations of emerging adulthood milestone achievement. At Time 7, when participants were 22 to 23 years old, milestone achievement was assessed. Parents of young people with spina bifida lowered their expectations over time for most milestones; parents of children with higher cognitive ability reported decreases of lower magnitude. Parent expectancies were optimistic and unrelated to actual milestone achievement. Emerging adults with spina bifida were less likely than individuals with typical development to achieve all milestones. Optimistic parental expectations may be adaptive for children with spina bifida and their families, although it is important for families to set realistic goals. Healthcare providers serve a key role in helping families of young people with spina bifida prepare for emerging adulthood. © 2016 Mac Keith Press.

Science and Technology Review September 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eimerl, D

1999-09-01

This review consists of the following titles; The Laboratory in the News; Life Performance of Complex Systems; A Better Picture of Aging Materials; Researchers Determine Chernobyl Liquidators' Exposure; and Target Chamber's Dedication Marks a Giant Milestone.

Use of Developmental Milestones in Pediatric Residency Training and Practice: Time to Rethink the Meaning of the Mean

PubMed Central

Sices, Laura

2009-01-01

Objective Pediatricians frequently report the use of developmental milestones in monitoring young children’s development, despite evidence that use of screening tools improves detection of developmental delays. Methods Core texts in the field of pediatrics and developmental-behavioral pediatrics were reviewed for content and presentation on child development. Most texts included and many focused on developmental milestones, many with an emphasis on 50th percentile milestone data. Problems and limitations in the use of 50th percentile milestones to monitor young children’s development and to identify children whose development is suspicious for delay, include questionable utility in clinical decision making and the potential to increase parental anxiety. Results The recommendation is made to reconsider a focus on 50th percentile milestone data in pediatric training and practice, in favor of measures that have better clinical utility and are more psychometrically sound. Conclusion A conceptual approach to the presentation of developmental milestones differentiates the use of the 10th, 50th, and 90th percentiles of age of achievement of skills, based on the clinical purpose of surveillance. PMID:17353732

ATDM Rover Milestone Report STDA02-1 (FY2017 Q4)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larsen, Matt; Laney, Dan E.

We have successfully completed the MS-4/Y1 Milestone STDA02-1 for the Rover Project. This document describes the milestone and provides an overview of the technical details and artifacts of the milestone. This milestone is focused on building a GPU accelerated ray tracing package capable of doing multi-group radiography, both back-lit and with self-emission as well as serving as a volume rendering plot in VisIt and other VTK-based visualization tools. The long term goal is a package with in-situ capability, but for this first version integration into VisIt is the primary goal. Milestone Execution Plan: Create API for GPU Raytracer that supportsmore » multi-group transport (up to hundreds of groups); Implement components into one or more of: VTK-m, VisIt, and a new library/package implementation to be hosted on LLNL Bitbucket (initially), before releasing to the wider community.« less

Similarities and differences in child development from birth to age 3 years by sex and across four countries: a cross-sectional, observational study.

PubMed

Ertem, Ilgi Ozturk; Krishnamurthy, Vibha; Mulaudzi, Mphelekedzeni C; Sguassero, Yanina; Balta, Hakan; Gulumser, Ozlem; Bilik, Burcu; Srinivasan, Roopa; Johnson, Benjamin; Gan, Geliang; Calvocoressi, Lisa; Shabanova, Veronika; Forsyth, Brian W C

2018-03-01

Knowledge about typical development is of fundamental importance for understanding and promoting child health and development. We aimed to ascertain when healthy children in four culturally and linguistically different countries attain developmental milestones and to identify similarities and differences across sexes and countries. In this cross-sectional, observational study, we recruited children aged 0-42 months and their caregivers between March 3, 2011, and May 18, 2015, at 22 health clinics in Argentina, India, South Africa, and Turkey. We obtained a healthy subsample, which excluded children with a low birthweight, perinatal complications, chronic illness, undernutrition, or anaemia, and children with missing health data. Using the Guide for Monitoring Child Development, caregivers described their child's development in seven domains: expressive and receptive language, gross and fine motor, play, relating, and self-help. Clinicians examining the children also completed a checklist about the child's health status. We used logit and probit regression models based on the lowest deviance information criterion to generate Bayesian point estimates and 95% credible intervals for the 50th percentile ages of attainment of 106 milestones. We assessed the significance of differences between sexes and countries using predefined criteria and regions of practical equivalence. Of 10 246 children recruited, 4949 children (48·3%) were included in the healthy subsample. For the 106 milestones assessed, the median age of attainment was equivalent for 102 (96%) milestones across sexes and 81 (76%) milestones across the four countries. Across countries, median ages of attainment were equivalent for all play milestones, 20 (77%) of 26 expressive language milestones, ten (67%) of 15 receptive language milestones, nine (82%) of 11 fine motor milestones, 14 (88%) of 16 gross motor milestones, and eight (73%) of 11 relating milestones. However, across the four countries the median age of attainment was equivalent for only two (22%) of nine milestones in the self-help domain. The ages of attainment of developmental milestones in healthy children, and the similarities and differences across sexes and country samples might aid the development of international tools to guide policy, service delivery, and intervention research, particularly in low-income and middle-income countries. Eunice Kennedy Shriver National Institute of Child Health and Human Development. Copyright © 2018 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license. Published by Elsevier Ltd.. All rights reserved.

The study on achievement of motor milestones and associated factors among children in rural North India

PubMed Central

Gupta, Arti; Kalaivani, Mani; Gupta, Sanjeev Kumar; Rai, Sanjay K.; Nongkynrih, Baridalyne

2016-01-01

Background: Nearly 14% of children worldwide do not reach their developmental potential in early childhood. The early identification of delays in achieving milestones is critical. The World Health Organization (WHO) has developed normal age ranges for the achievement of motor milestones by healthy children. This study aimed to assess the gross motor developmental achievements and associated factors among children in rural India. Materials and Methods: A cross-sectional study was conducted with rural children in North India. A pretested questionnaire was used to collect the data. The median age at the time of the highest observed milestone was calculated and compared with the WHO windows of achievement. Results: Overall, 221 children aged 4–18 months were included in the study. The median age of motor development exhibited a 0.1–2.1-month delay compared to the WHO median age of motor milestone achievement. The prevalence of the gross motor milestone achievements for each of the six milestones ranged from 91.6% to 98.4%. Developmental delay was observed in 6.3% of the children. After adjusting for different variables, children with birth order of second or more were found to be significantly associated with the timely achievement of gross motor milestones. Conclusion: The apparently healthy children of the rural area of Haryana achieved gross motor milestones with some delay with respect to the WHO windows of achievement. Although the median value of this delay was low, awareness campaigns should be implemented to promote timely identification of children with development delays. PMID:27843845

The New Accreditation Council for Graduate Medical Education Next Accreditation System Milestones Evaluation System: What Is Expected and How Are Plastic Surgery Residency Programs Preparing?

PubMed

Sillah, Nyama M; Ibrahim, Ahmed M S; Lau, Frank H; Shah, Jinesh; Medin, Caroline; Lee, Bernard T; Lin, Samuel J

2015-07-01

The Accreditation Council for Graduate Medical Education Next Accreditation System milestones were implemented for plastic surgery programs in July of 2014. Forward progress through the milestones is an indicator of trainee-appropriate development, whereas regression or stalling may indicate the need for concentrated, targeted training. Online software at www.surveymonkey.com was used to create a survey about the program's approaches to milestones and was distributed to program directors and administrators of 96 Accreditation Council for Graduate Medical Education-approved plastic surgery programs. The authors had a 63.5 percent response rate (61 of 96 plastic surgery programs). Most programs report some level of readiness, only 22 percent feel completely prepared for the Next Accreditation System milestones, and only 23 percent are completely satisfied with their planned approach for compliance. Seventy-five percent of programs claim to be using some form of electronic tracking system. Programs plan to use multiple tools to capture and report milestone data. Most programs (44.4 percent) plan to administer evaluations at the end of each rotation. Over 70 percent of respondents believe that the milestones approach would improve the quality of resident training. However, programs were less than confident that their current compliance systems would live up to their full potential. The Next Accreditation System has been implemented nationwide for plastic surgery training programs. Milestone-based resident training is a new paradigm for residency training evaluation; programs are in the process of making this transition to find ways to make milestone data meaningful for faculty and residents.

Space shuttle requirements/configuration evolution

NASA Technical Reports Server (NTRS)

Andrews, E. P.

1991-01-01

Space Shuttle chronology; Space Shuttle comparison; Cost comparison; Performance; Program ground rules; Sizing criteria; Crew/passenger provisions; Space Shuttle Main Engine (SSME) characteristics; Space Shuttle program milestones; and Space Shuttle requirements are outlined. This presentation is represented by viewgraphs.

Space station crew safety: Human factors interaction model

NASA Technical Reports Server (NTRS)

Cohen, M. M.; Junge, M. K.

1985-01-01

A model of the various human factors issues and interactions that might affect crew safety is developed. The first step addressed systematically the central question: How is this space station different from all other spacecraft? A wide range of possible issue was identified and researched. Five major topics of human factors issues that interacted with crew safety resulted: Protocols, Critical Habitability, Work Related Issues, Crew Incapacitation and Personal Choice. Second, an interaction model was developed that would show some degree of cause and effect between objective environmental or operational conditions and the creation of potential safety hazards. The intermediary steps between these two extremes of causality were the effects on human performance and the results of degraded performance. The model contains three milestones: stressor, human performance (degraded) and safety hazard threshold. Between these milestones are two countermeasure intervention points. The first opportunity for intervention is the countermeasure against stress. If this countermeasure fails, performance degrades. The second opportunity for intervention is the countermeasure against error. If this second countermeasure fails, the threshold of a potential safety hazard may be crossed.

Level-2 Milestone 5588: Deliver Strategic Plan and Initial Scalability Assessment by Advanced Architecture and Portability Specialists Team

DOE Office of Scientific and Technical Information (OSTI.GOV)

Draeger, Erik W.

This report documents the fact that the work in creating a strategic plan and beginning customer engagements has been completed. The description of milestone is: The newly formed advanced architecture and portability specialists (AAPS) team will develop a strategic plan to meet the goals of 1) sharing knowledge and experience with code teams to ensure that ASC codes run well on new architectures, and 2) supplying skilled computational scientists to put the strategy into practice. The plan will be delivered to ASC management in the first quarter. By the fourth quarter, the team will identify their first customers within PEMmore » and IC, perform an initial assessment and scalability and performance bottleneck for next-generation architectures, and embed AAPS team members with customer code teams to assist with initial portability development within standalone kernels or proxy applications.« less

There is variability in the attainment of developmental milestones in the CDKL5 disorder.

PubMed

Fehr, Stephanie; Leonard, Helen; Ho, Gladys; Williams, Simon; de Klerk, Nick; Forbes, David; Christodoulou, John; Downs, Jenny

2015-01-01

Individuals with the CDKL5 disorder have been described as having severely impaired development. A few individuals have been reported having attained more milestones including walking and running. Our aim was to investigate variation in attainment of developmental milestones and associations with underlying genotype. Data was sourced from the International CDKL5 Disorder Database, and individuals were included if they had a pathogenic or probably pathogenic CDKL5 mutation and information on early development. Kaplan-Meier time-to-event analyses investigated the occurrence of developmental milestones. Mutations were grouped by their structural/functional consequence, and Cox regression was used to investigate the relationship between genotype and milestone attainment. The study included 109 females and 18 males. By 5 years of age, only 75% of the females had attained independent sitting and 25% independent walking whilst a quarter of the males could sit independently by 1 year 3 months. Only one boy could walk independently. No clear relationship between mutation group and milestone attainment was present, although females with a late truncating mutation attained the most milestones. Attainment of developmental milestones is severely impaired in the CDKL5 disorder, with the majority who did attain skills attaining them at a late age. It appears as though males are more severely impaired than the females. Larger studies are needed to further investigate the role of genotype on clinical variability.

48 CFR 307.7106 - Acquisition milestones.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Acquisition milestones. 307.7106 Section 307.7106 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES COMPETITION... to track progress of the acquisition. The milestone schedule signatories (see the Requirements and...

48 CFR 307.7106 - Acquisition milestones.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Acquisition milestones. 307.7106 Section 307.7106 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES COMPETITION... to track progress of the acquisition. The milestone schedule signatories (see the Requirements and...

Exact milestoning

PubMed Central

Bello-Rivas, Juan M.; Elber, Ron

2015-01-01

A new theory and an exact computer algorithm for calculating kinetics and thermodynamic properties of a particle system are described. The algorithm avoids trapping in metastable states, which are typical challenges for Molecular Dynamics (MD) simulations on rough energy landscapes. It is based on the division of the full space into Voronoi cells. Prior knowledge or coarse sampling of space points provides the centers of the Voronoi cells. Short time trajectories are computed between the boundaries of the cells that we call milestones and are used to determine fluxes at the milestones. The flux function, an essential component of the new theory, provides a complete description of the statistical mechanics of the system at the resolution of the milestones. We illustrate the accuracy and efficiency of the exact Milestoning approach by comparing numerical results obtained on a model system using exact Milestoning with the results of long trajectories and with a solution of the corresponding Fokker-Planck equation. The theory uses an equation that resembles the approximate Milestoning method that was introduced in 2004 [A. K. Faradjian and R. Elber, J. Chem. Phys. 120(23), 10880-10889 (2004)]. However, the current formulation is exact and is still significantly more efficient than straightforward MD simulations on the system studied. PMID:25747056

A multi-source feedback tool for measuring a subset of Pediatrics Milestones.

PubMed

Schwartz, Alan; Margolis, Melissa J; Multerer, Sara; Haftel, Hilary M; Schumacher, Daniel J

2016-10-01

The Pediatrics Milestones Assessment Pilot employed a new multisource feedback (MSF) instrument to assess nine Pediatrics Milestones among interns and subinterns in the inpatient context. To report validity evidence for the MSF tool for informing milestone classification decisions. We obtained MSF instruments by different raters per learner per rotation. We present evidence for validity based on the unified validity framework. One hundred and ninety two interns and 41 subinterns at 18 Pediatrics residency programs received a total of 1084 MSF forms from faculty (40%), senior residents (34%), nurses (22%), and other staff (4%). Variance in ratings was associated primarily with rater (32%) and learner (22%). The milestone factor structure fit data better than simpler structures. In domains except professionalism, ratings by nurses were significantly lower than those by faculty and ratings by other staff were significantly higher. Ratings were higher when the rater observed the learner for longer periods and had a positive global opinion of the learner. Ratings of interns and subinterns did not differ, except for ratings by senior residents. MSF-based scales correlated with summative milestone scores. We obtain moderately reliable MSF ratings of interns and subinterns in the inpatient context to inform some milestone assignments.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rutqvist, Jonny; Blanco-Martin, Laura; Molins, Sergi

In this report, we present FY2015 progress by Lawrence Berkeley National Laboratory (LBNL) related to modeling of coupled thermal-hydrological-mechanical-chemical (THMC) processes in salt and their effect on brine migration at high temperatures. This is a combined milestone report related to milestone Salt R&D Milestone “Modeling Coupled THM Processes and Brine Migration in Salt at High Temperatures” (M3FT-15LB0818012) and the Salt Field Testing Milestone (M3FT-15LB0819022) to support the overall objectives of the salt field test planning.

Psychosexual development and satisfaction with timing of developmental milestones among adult survivors of childhood cancer.

PubMed

Lehmann, Vicky; Keim, Madelaine C; Ferrante, Amanda C; Olshefski, Randal S; Gerhardt, Cynthia A

2018-04-27

To extend the limited research on psychosexual development among childhood cancer survivors, by not only focusing on the prevalence and age of milestone attainment, but also survivors' attitudes toward the timing of reaching such milestones. Adult survivors of childhood cancer (N = 90; M age  = 29.8, SD = 5.2), recruited from a US pediatric institution, completed online surveys indicating whether they had reached 5 milestones of psychosexual development (ie, first kiss, first boy-/girlfriend, first physical intimacy, sexual debut, first time in love), age at attainment, and perceptions about the timing (ie, right time, wished it had happened earlier, wished they had waited). Almost all survivors had reached each milestone (≥90%), except for sexual debut (83.3%). Survivors reported their first kiss as the earliest milestone at age 14.6 (N = 82, 92%) and falling in love as the latest milestone at age 18.8 (N = 80; 90%). This timing did not differ by sex/cancer-specific factors. Most survivors (~60%) felt they reached each milestone at the right time. Compared with US normative data, both male and female survivors were less likely to have experienced their sexual debut and were approximately 1.5 years older at sexual debut. Nevertheless, 59% of survivors felt that this timing was right and 31% wished they had waited longer. This is the first study to demonstrate that although childhood cancer survivors may delay some aspects of psychosexual development, most are satisfied with this timing. Research and clinical practice should emphasize survivors' perceptions/satisfaction toward psychosexual development rather than focusing only on normative milestone attainment. Copyright © 2018 John Wiley & Sons, Ltd.

Putting the pediatrics milestones into practice: a consensus roadmap and resource analysis.

PubMed

Schumacher, Daniel J; Spector, Nancy D; Calaman, Sharon; West, Daniel C; Cruz, Mario; Frohna, John G; Gonzalez Del Rey, Javier; Gustafson, Kristina K; Poynter, Sue Ellen; Rosenbluth, Glenn; Southgate, W Michael; Vinci, Robert J; Sectish, Theodore C

2014-05-01

The Accreditation Council for Graduate Medical Education has partnered with member boards of the American Board of Medical Specialties to initiate the next steps in advancing competency-based assessment in residency programs. This initiative, known as the Milestone Project, is a paradigm shift from traditional assessment efforts and requires all pediatrics residency programs to report individual resident progression along a series of 4 to 5 developmental levels of performance, or milestones, for individual competencies every 6 months beginning in June 2014. The effort required to successfully make this shift is tremendous given the number of training programs, training institutions, and trainees. However, it holds great promise for achieving training outcomes that align with patient needs; developing a valid, reliable, and meaningful way to track residents' development; and providing trainees with a roadmap for learning. Recognizing the resources needed to implement this new system, the authors, all residency program leaders, provide their consensus view of the components necessary for implementing and sustaining this effort, including resource estimates for completing this work. The authors have identified 4 domains: (1) Program Review and Development of Stakeholders and Participants, (2) Assessment Methods and Validation, (3) Data and Assessment System Development, and (4) Summative Assessment and Feedback. This work can serve as a starting point and framework for collaboration with program, department, and institutional leaders to identify and garner necessary resources and plan for local and national efforts that will ensure successful transition to milestones-based assessment. Copyright © 2014 by the American Academy of Pediatrics.

Milestones in Medical Research, The Human Genome and ClinicalTrials.gov | NIH MedlinePlus the Magazine

MedlinePlus

... page please turn Javascript on. Milestones in Medical Research, The Human Genome and ClinicalTrials.gov Past Issues / ... 10th anniversary of two important achievements in medical research—the first, a major milestone in understanding the ...

EPA Interim Evaluation of 2016-2017 Milestone Progress in the Chesapeake Bay Watershed

EPA Pesticide Factsheets

This page provides the EPA interim evaluations of the 2016-2017 milestones for the Chesapeake Bay TMDL. These interim assessments provide a mid-point check on the progress made on the 2016-2017 milestones, recognizing the achievements made in 2016.

EPA Interim Evaluation of 2012-2013 Milestone Progress in the Chesapeake Bay Watershed

EPA Pesticide Factsheets

This page provides the EPA interim evaluations of the 2012-2013 milestones for the Chesapeake Bay TMDL. These interim assessments provide a mid-point check on the progress made on the 2012-2013 milestones, recognizing the achievements made in 2012.

EPA Interim Evaluation of 2014-2015 Milestone Progress in the Chesapeake Bay Watershed

EPA Pesticide Factsheets

This page provides the EPA interim evaluations of the 2014-2015 milestones for the Chesapeake Bay TMDL. These interim assessments provide a mid-point check on the progress made on the 2014-2015 milestones, recognizing the achievements made in 2014.

Visuospatial Aptitude Testing Differentially Predicts Simulated Surgical Skill.

PubMed

Hinchcliff, Emily; Green, Isabel; Destephano, Christopher; Cox, Mary; Smink, Douglas; Kumar, Amanika; Hokenstad, Erik; Bengtson, Joan; Cohen, Sarah

2018-02-05

To determine if visuospatial perception (VSP) testing is correlated to simulated or intraoperative surgical performance as rated by the American College of Graduate Medical Education (ACGME) milestones. Classification II-2 SETTING: Two academic training institutions PARTICIPANTS: 41 residents, including 19 Brigham and Women's Hospital and 22 Mayo Clinic residents from three different specialties (OBGYN, general surgery, urology). Participants underwent three different tests: visuospatial perception testing (VSP), Fundamentals of Laparoscopic Surgery (FLS®) peg transfer, and DaVinci robotic simulation peg transfer. Surgical grading from the ACGME milestones tool was obtained for each participant. Demographic and subject background information was also collected including specialty, year of training, prior experience with simulated skills, and surgical interest. Standard statistical analysis using Student's t test were performed, and correlations were determined using adjusted linear regression models. In univariate analysis, BWH and Mayo training programs differed in both times and overall scores for both FLS® peg transfer and DaVinci robotic simulation peg transfer (p<0.05 for all). Additionally, type of residency training impacted time and overall score on robotic peg transfer. Familiarity with tasks correlated with higher score and faster task completion (p= 0.05 for all except VSP score). There was no difference in VSP scores by program, specialty, or year of training. In adjusted linear regression modeling, VSP testing was correlated only to robotic peg transfer skills (average time p=0.006, overall score p=0.001). Milestones did not correlate to either VSP or surgical simulation testing. VSP score was correlated with robotic simulation skills but not with FLS skills or ACGME milestones. This suggests that the ability of VSP score to predict competence differs between tasks. Therefore, further investigation is required into aptitude testing, especially prior to its integration as an entry examination into a surgical subspecialty. Copyright © 2018. Published by Elsevier Inc.

Airport Noise Tech Challenge Overview

NASA Technical Reports Server (NTRS)

Bridges, James

2011-01-01

The Supersonics Project, operating under NASA Aeronautics Mission Directorate#s Fundamental Aero Program, has been organized around the Technical Challenges that have historically precluded commercial supersonic flight. One of these Challenges is making aircraft that are capable of such high aerodynamic performance quiet enough around airports that they will not be objectionable. It is recognized that a successful civilian supersonic aircraft will be a system where many new technologies will come together, and for this to happen not only will new low noise propulsion concepts be required, but new engineering tools that predict the noise of the aircraft as these technologies are combined and compromised with the rest of the aircraft design. These are the two main objectives of the Airport Noise Tech Challenge. " ! As a Project in the Fundamental Aero Program, we work at a relatively low level of technology readiness. However, we have high level milestones which force us to integrate our efforts to impact systems-level activities. To keep the low-level work tied to delivering engineering tools and low-noise concepts, we have structured our milestones around development of the concepts and organized our activities around developing and applying our engineering tools to these concepts. The final deliverables in these milestones are noise prediction modules validated against the best embodiment of each concept. These will then be used in cross-disciplinary exercises to demonstrate the viability of aircraft designs to meet all the Technical Challenges. Some of the concepts being developed are shown: Fan Flow Diverters, Multi-jet Shielding, High-Aspect Ratio Embedded Nozzles, Plasma Actuated Instability Manipulation, Highly Variable Cycle Mixer- Ejectors, and Inverted Velocity Profiles. These concepts are being developed for reduced jet noise along with the design tools which describe how they perform when used in various aircraft configurations. Several key upcoming events are highlighted, including tests of the Highly Variable Cycle Mixer-Ejectors, and Inverted Velocity Profiles. Other key events are milestones to be delivered within the next calendar year.

MRT 5711 - Scope Radiochemical Analysis Comparison: Joint LANL-LLNL FY17 L-2 Milestone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murray, S. D.; Lee, A. S.

A 2016 Level-1 milestone highlighted surprising differences in fundamental data used by the two US design laboratories. To better understand and ultimately resolve those differences, two Level-2 milestones were developed for execution in FY-17 and FY-18.

X-15 Concept Evolution

NASA Technical Reports Server (NTRS)

Williams, Walter C.

1991-01-01

The historical events that led to the development of the X-15 research aircraft are presented. Some of the topics presented include: (1) manned airplane performance regions; (2) X-15 flight problems; (3) design characteristics for conceptual aircraft; (4) analysis of X-15 accident potential; (5) X-15 performance requirements; and (6) milestones in the development of the X-15.

The Deep Space Gateway: The Next Stepping Stone to Mars

NASA Astrophysics Data System (ADS)

Cassady, R. J.; Carberry, C.; Cichan, T.

2018-02-01

Human missions to Mars will benefit from precursor missions such as the Deep Space Gateway (DSG) that achieve important science and human health and safety milestones. The DSG can perform lunar science and prepare for future Mars mission science.

Associations of Early Developmental Milestones with Adult Intelligence

ERIC Educational Resources Information Center

Flensborg-Madsen, Trine; Mortensen, Erik L.

2018-01-01

The study investigated whether age at attainment of 20 developmental milestones within the areas of language, walking, eating, dressing, social interaction, and toilet training was associated with adult intelligence. Mothers of 821 children of the Copenhagen Perinatal Cohort recorded 20 developmental milestones at a 3-year examination, and all…

Annual Progress Report on the Development of Waste Tank Leak Monitoring and Detection and Mitigation Activities in Support of M-45-08

DOE Office of Scientific and Technical Information (OSTI.GOV)

DEFIGH PRICE, C.

2000-09-25

Milestone M-45-09E of the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement or TPA) [TPA 1996] requires submittal of an annual progress report on the development of waste tank leak detection, monitoring, and mitigation (LDMM) activities associated with the retrieval of waste from single-shell tanks (SSTs). This report details progress for fiscal year 2000, building on the current LDMM strategy and including discussion of technologies, applications, cost, schedule, and technical data. The report also includes discussion of demonstrations conducted and recommendations for additional testing. Tri-Party Agreement Milestones M-45-08A and M-45-08B required design and demonstration of LDMM systems for initialmore » retrieval of SST waste. These specific milestones have recently been deleted as part of the M-45-00A change package. Future LDMM development work has been incorporated into specific technology demonstration milestones and SST waste retrieval milestones in the M-45-03 and M-45-05 milestone series.« less

The K-8 Aeronautics Internet Testbook: Project Plan-Year 3

NASA Technical Reports Server (NTRS)

Pallis, Jani Macari

1997-01-01

The Project Plan - Year 3 includes: the major tasks and milestones, the assignment of tasks, and the key personnel assigned to each task, a description of the milestone and major task, and the deliverables for the project. Milestones have project numbers ending in "0.0", such as "25.0.0 Phase III Development". Major tasks under that milestone begin with the same first number such as, "25.0.1 Develop Future Of Aeronautics". The assignment of tasks included in the Year 3 project plan contains the names of the key personnel responsible for the task and others participating on the task. Although the PI has the overall and ultimately responsible for all the tasks and milestones, the name of the first individual on a task or milestone is the person responsible for that task. Other names listed under that task will be participating on the task. Since there are two individuals at Cislunar Aerospace, Inc. with the name "J. Pallis", the principal investigator, Jani Macari Pallis is designated as PI in the Project Plan and James Pallis is designated as J. Pallis.

Mapping Residency Global Health Experiences to the ACGME Family Medicine Milestones.

PubMed

Grissom, Maureen O; Iroku-Malize, Tochi; Peila, Rita; Perez, Marco; Philippe, Neubert

2017-07-01

Global health (GH) experiences are a unique part of family medicine (FM) training that offer an opportunity for residents to demonstrate development across a multitude of the milestones recently implemented by the Accreditation Council for Graduate Medical Education (ACGME). The GH experience presents an opportunity for resident development, and including a component of written reflection can provide tangible evidence of development in areas that can be difficult to assess. A mixed methods approach was used to integrate quantitative (frequency) data with qualitative content from the written reflections of 12 of our FM residents who participated in GH experiences. Written reflections touched on each of the 22 milestones, although some milestones were noted more frequently than others. The most commonly identified milestones fell within the competency areas of systems-based practice, professionalism, and practice-based learning and improvement. Our qualitative approach allowed us to gain an appreciation of the unique experiences that demonstrated growth across the various milestones. We conclude that any program that offers GH experiences should incorporate some form of written reflection to maximize resident growth and offer evaluative faculty a window into that development.

Social Withdrawal Behaviour at One Year of Age Is Associated with Delays in Reaching Language Milestones in the EDEN Mother-Child Cohort Study.

PubMed

Guedeney, Antoine; Forhan, Anne; Larroque, Beatrice; de Agostini, Maria; Pingault, Jean-Baptiste; Heude, Barbara

2016-01-01

The aim of the study was to examine the relationship between social withdrawal behaviour at one year and motor and language milestones. One-year old children from the EDEN French population-based birth cohort study (Study on the pre- and postnatal determinants of the child's development and prospective health Birth Cohort Study) were included. Social withdrawal at one year was assessed by trained midwives using the Alarm Distress BaBy (ADBB) scale. Midwives concurrently examined infants' motor and language milestones. Parents reported on child's psychomotor and language milestones, during the interview with the midwife. After adjusting for potential confounding factors, social withdrawal behaviour was significantly associated with concurrent delays in motor and language milestones assessed by the midwife or the parents. Higher scores on social withdrawal behaviour as assessed with the ADBB were associated with delays in reaching language milestones, and to a lesser extent with lower motor ability scores. Taking the contribution of social withdrawal behaviour into account may help understand the unfolding of developmental difficulties in children.

Lean and Efficient Software: Whole-Program Optimization of Executables

DTIC Science & Technology

2013-01-03

staffing for the project  Implementing the necessary infrastructure ( testing, performance evaluation, needed support software, bug and issue...in the SOW The result of the planning discussions is shown in the milestone table (section 6). In addition, we selected appropriate engineering

Intelligent Flight Control System and Aeronautics Research at NASA Dryden

NASA Technical Reports Server (NTRS)

Brown, Nelson A.

2009-01-01

This video presentation reviews the F-15 Intelligent Flight Control System and contains clips of flight tests and aircraft performance in the areas of target tracking, takeoff and differential stabilators. Video of the APG milestone flight 1g formation is included.

Learning Disabilities.

ERIC Educational Resources Information Center

Neuwirth, Sharyn

This booklet uses hypothetical case examples to illustrate the definition, causal theories, and specific types of learning disabilities (LD). The cognitive and language performance of students with LD is compared to standard developmental milestones, and common approaches to the identification and education of children with LD are outlined.…

ARIES Oxide Production Program Annual Report - FY14

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelley, Evelyn A.; Dinehart, Steven Mark

A summary of the major accomplishments (September), milestones, financial summary, project performance and issues facing the ARIES Oxide Production Program at the close of FY14 is presented in this Executive Summary. Annual accomplishments are summarized in the body of the report.

L3.PHI.CTF.P10.02-rev2 Coupling of Subchannel T/H (CTF) and CRUD Chemistry (MAMBA1D)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salko, Robert K.; Palmtag, Scott; Collins, Benjamin S.

2015-05-15

The purpose of this milestone is to create a preliminary capability for modeling light water reactor (LWR) thermal-hydraulic (T/H) and CRUD growth using the CTF subchannel code and the subgrid version of the MAMBA CRUD chemistry code, MAMBA1D. In part, this is a follow-on to Milestone L3.PHI.VCS.P9.01, which is documented in Report CASL-U-2014-0188-000, titled "Development of CTF Capability for Modeling Reactor Operating Cycles with Crud Growth". As the title suggests, the previous milestone set up a framework for modeling reactor operation cycles with CTF. The framework also facilitated coupling to a CRUD chemistry capability for modeling CRUD growth throughout themore » reactor operating cycle. To demonstrate the capability, a simple CRUD \\surrogate" tool was developed and coupled to CTF; however, it was noted that CRUD growth predictions by the surrogate were not considered realistic. This milestone builds on L3.PHI.VCS.P9.01 by replacing this simple surrogate tool with the more advanced MAMBA1D CRUD chemistry code. Completing this task involves addressing unresolved tasks from Milestone L3.PHI.VCS.P9.01, setting up an interface to MAMBA1D, and extracting new T/H information from CTF that was not previously required in the simple surrogate tool. Speci c challenges encountered during this milestone include (1) treatment of the CRUD erosion model, which requires local turbulent kinetic energy (TKE) (a value that CTF does not calculate) and (2) treatment of the MAMBA1D CRUD chimney boiling model in the CTF rod heat transfer solution. To demonstrate this new T/H, CRUD modeling capability, two sets of simulations were performed: (1) an 18 month cycle simulation of a quarter symmetry model of Watts Bar and (2) a simulation of Assemblies G69 and G70 from Seabrook Cycle 5. The Watts Bar simulation is merely a demonstration of the capability. The simulation of the Seabrook cycle, which had experienced CRUD-related fuel rod failures, had actual CRUD-scrape data to compare with results. As results show, the initial CTF/MAMBA1D-predicted CRUD thicknesses were about half of their expected values, so further investigation will be required for this simulation.« less

An entrustable professional activity (EPA) for handoffs as a model for EPA assessment development.

PubMed

Aylward, Michael; Nixon, James; Gladding, Sophia

2014-10-01

Medical education is moving toward assessment of educational outcomes rather than educational processes. The American Board of Internal Medicine and American Board of Pediatrics milestones and the concept of entrustable professional activities (EPA)--skills essential to the practice of medicine that educators progressively entrust learners to perform--provide new approaches to assessing outcomes. Although some defined EPAs exist for internal medicine and pediatrics, the continued development and implementation of EPAs remains challenging. As residency programs are expected to begin reporting milestone-based performance, however, they will need examples of how to overcome these challenges. The authors describe a model for the development and implementation of an EPA using the resident handoff as an example. The model includes nine steps: selecting the EPA, determining where skills are practiced and assessed, addressing barriers to assessment, determining components of the EPA, determining needed assessment tools, developing new assessments if needed, determining criteria for advancement through entrustment levels, mapping milestones to the EPA, and faculty development. Following implementation, 78% of interns at the University of Minnesota Medical School were observed giving handoffs and provided feedback. The authors suggest that this model of EPA development--which includes engaging stakeholders, an iterative process to describing the behavioral characteristics of each domain at each level of entrustment, and the development of specific assessment tools that support both formative feedback and summative decisions about entrustment--can serve as a model for EPA development for other clinical skills and specialty areas.

Associations between Functional Milestones and Psychiatric Admissions in an Urban Area: Utility of a Cluster-Analytical Approach.

PubMed

Montemagni, Cristiana; Frieri, Tiziana; Villari, Vincenzo; Rocca, Paola

2018-06-01

The purpose of the study was to identify homogenous subgroups, based upon achievement of two functional milestones (marriage and employment) and Global Assessment of Functioning (GAF) score in a sample of 848 acute patients admitted to the Psychiatric Emergency Service (PES) of the Città della Salute e della Scienza di Torino, during a 24-months period. A two-step cluster-analysis, using GAF total score and the achievements in the two milestones as input data was performed. In order to examine whether the identified subgroups differed in external variables that were not included in the clustering process, and consequently to validate the found functional profiles, chi-square tests for categorical variables and analyses of variance (ANOVA) for continuous variables were performed. Five clusters were found. Employed patients (Clusters 4 and 5) had more years of education, less illness chronicity (shorter duration of illness and lower proportion of previous voluntary hospitalizations), lower use of mental health resources in the last year yet higher treatment adherence, larger network size, and higher ordinary discharge. Married inpatients (Clusters 3 and 5) had lower frequencies of substance abuse. The remarkably high rate of unemployment in this inpatients' sample, and the evidence of associations between unemployment and poorer functioning, argue for further research and development of evidence-based supported employment programs, that put forth diligent effort in helping people obtain work quickly and sustain; they may also help to reduce health care service use among that clientele.

Assessing the performance of methodological search filters to improve the efficiency of evidence information retrieval: five literature reviews and a qualitative study.

PubMed

Lefebvre, Carol; Glanville, Julie; Beale, Sophie; Boachie, Charles; Duffy, Steven; Fraser, Cynthia; Harbour, Jenny; McCool, Rachael; Smith, Lynne

2017-11-01

Effective study identification is essential for conducting health research, developing clinical guidance and health policy and supporting health-care decision-making. Methodological search filters (combinations of search terms to capture a specific study design) can assist in searching to achieve this. This project investigated the methods used to assess the performance of methodological search filters, the information that searchers require when choosing search filters and how that information could be better provided. Five literature reviews were undertaken in 2010/11: search filter development and testing; comparison of search filters; decision-making in choosing search filters; diagnostic test accuracy (DTA) study methods; and decision-making in choosing diagnostic tests. We conducted interviews and a questionnaire with experienced searchers to learn what information assists in the choice of search filters and how filters are used. These investigations informed the development of various approaches to gathering and reporting search filter performance data. We acknowledge that there has been a regrettable delay between carrying out the project, including the searches, and the publication of this report, because of serious illness of the principal investigator. The development of filters most frequently involved using a reference standard derived from hand-searching journals. Most filters were validated internally only. Reporting of methods was generally poor. Sensitivity, precision and specificity were the most commonly reported performance measures and were presented in tables. Aspects of DTA study methods are applicable to search filters, particularly in the development of the reference standard. There is limited evidence on how clinicians choose between diagnostic tests. No published literature was found on how searchers select filters. Interviewing and questioning searchers via a questionnaire found that filters were not appropriate for all tasks but were predominantly used to reduce large numbers of retrieved records and to introduce focus. The Inter Technology Appraisal Support Collaboration (InterTASC) Information Specialists' Sub-Group (ISSG) Search Filters Resource was most frequently mentioned by both groups as the resource consulted to select a filter. Randomised controlled trial (RCT) and systematic review filters, in particular the Cochrane RCT and the McMaster Hedges filters, were most frequently mentioned. The majority indicated that they used different filters depending on the requirement for sensitivity or precision. Over half of the respondents used the filters available in databases. Interviewees used various approaches when using and adapting search filters. Respondents suggested that the main factors that would make choosing a filter easier were the availability of critical appraisals and more detailed performance information. Provenance and having the filter available in a central storage location were also important. The questionnaire could have been shorter and could have included more multiple choice questions, and the reviews of filter performance focused on only four study designs. Search filter studies should use a representative reference standard and explicitly report methods and results. Performance measures should be presented systematically and clearly. Searchers find filters useful in certain circumstances but expressed a need for more user-friendly performance information to aid filter choice. We suggest approaches to use, adapt and report search filter performance. Future work could include research around search filters and performance measures for study designs not addressed here, exploration of alternative methods of displaying performance results and numerical synthesis of performance comparison results. The National Institute for Health Research (NIHR) Health Technology Assessment programme and Medical Research Council-NIHR Methodology Research Programme (grant number G0901496).

Assessing the performance of methodological search filters to improve the efficiency of evidence information retrieval: five literature reviews and a qualitative study.

PubMed Central

Lefebvre, Carol; Glanville, Julie; Beale, Sophie; Boachie, Charles; Duffy, Steven; Fraser, Cynthia; Harbour, Jenny; McCool, Rachael; Smith, Lynne

2017-01-01

BACKGROUND Effective study identification is essential for conducting health research, developing clinical guidance and health policy and supporting health-care decision-making. Methodological search filters (combinations of search terms to capture a specific study design) can assist in searching to achieve this. OBJECTIVES This project investigated the methods used to assess the performance of methodological search filters, the information that searchers require when choosing search filters and how that information could be better provided. METHODS Five literature reviews were undertaken in 2010/11: search filter development and testing; comparison of search filters; decision-making in choosing search filters; diagnostic test accuracy (DTA) study methods; and decision-making in choosing diagnostic tests. We conducted interviews and a questionnaire with experienced searchers to learn what information assists in the choice of search filters and how filters are used. These investigations informed the development of various approaches to gathering and reporting search filter performance data. We acknowledge that there has been a regrettable delay between carrying out the project, including the searches, and the publication of this report, because of serious illness of the principal investigator. RESULTS The development of filters most frequently involved using a reference standard derived from hand-searching journals. Most filters were validated internally only. Reporting of methods was generally poor. Sensitivity, precision and specificity were the most commonly reported performance measures and were presented in tables. Aspects of DTA study methods are applicable to search filters, particularly in the development of the reference standard. There is limited evidence on how clinicians choose between diagnostic tests. No published literature was found on how searchers select filters. Interviewing and questioning searchers via a questionnaire found that filters were not appropriate for all tasks but were predominantly used to reduce large numbers of retrieved records and to introduce focus. The Inter Technology Appraisal Support Collaboration (InterTASC) Information Specialists' Sub-Group (ISSG) Search Filters Resource was most frequently mentioned by both groups as the resource consulted to select a filter. Randomised controlled trial (RCT) and systematic review filters, in particular the Cochrane RCT and the McMaster Hedges filters, were most frequently mentioned. The majority indicated that they used different filters depending on the requirement for sensitivity or precision. Over half of the respondents used the filters available in databases. Interviewees used various approaches when using and adapting search filters. Respondents suggested that the main factors that would make choosing a filter easier were the availability of critical appraisals and more detailed performance information. Provenance and having the filter available in a central storage location were also important. LIMITATIONS The questionnaire could have been shorter and could have included more multiple choice questions, and the reviews of filter performance focused on only four study designs. CONCLUSIONS Search filter studies should use a representative reference standard and explicitly report methods and results. Performance measures should be presented systematically and clearly. Searchers find filters useful in certain circumstances but expressed a need for more user-friendly performance information to aid filter choice. We suggest approaches to use, adapt and report search filter performance. Future work could include research around search filters and performance measures for study designs not addressed here, exploration of alternative methods of displaying performance results and numerical synthesis of performance comparison results. FUNDING The National Institute for Health Research (NIHR) Health Technology Assessment programme and Medical Research Council-NIHR Methodology Research Programme (grant number G0901496). PMID:29188764

Aligning In-Service Training Examinations in Plastic Surgery and Orthopaedic Surgery With Competency-Based Education.

PubMed

Ganesh Kumar, Nishant; Benvenuti, Michael A; Drolet, Brian C

2017-10-01

In-service training examinations (ITEs) are used to assess residents across specialties. However, it is not clear how they are integrated with the Accreditation Council for Graduate Medical Education Milestones and competencies. This study explored the distribution of specialty-specific milestones and competencies in ITEs for plastic surgery and orthopaedic surgery. In-service training examinations were publicly available for plastic surgery (PSITE) and orthopaedics (OITE). Questions on the PSITE for 2014-2016 and the OITE for 2013-2015 were mapped to the specialty-specific milestones and the 6 competencies. There was an uneven distribution of milestones and competencies in ITE questions. Nine of the 36 Plastic Surgery Milestones represented 52% (341 of 650) of questions, and 3 were not included in the ITE. Of 41 Orthopaedic Surgery Milestones, 7 represented 51% (201 of 394) of questions, and 5 had no representation on the ITE. Among the competencies, patient care was the most common (PSITE = 62% [403 of 650]; OITE = 59% [233 of 394]), followed by medical knowledge (PSITE = 34% [222 of 650]; OITE = 31% [124 of 394]). Distribution of the remaining competencies differed between the 2 specialties (PSITE = 4% [25 of 650]; OITE = 9% [37 of 394]). The ITEs tested slightly more than half of the milestones for the 2 specialties, and focused predominantly on patient care and medical knowledge competencies.

Piloting a Structured Practice Audit to Assess ACGME Milestones in Written Handoff Communication in Internal Medicine

PubMed Central

Martin, Shannon K.; Farnan, Jeanne M.; McConville, John F.; Arora, Vineet M.

2015-01-01

Background Written communication skills are integral to patient care handoffs. Residency programs require feasible assessment tools that provide timely formative and summative feedback, ideally linked to the Accreditation Council for Graduate Medical Education Milestones. Objective We describe the use of 1 such tool—UPDATED—to assess written handoff communication skills in internal medicine interns. Methods During 2012–2013, the authors piloted a structured practice audit at 1 academic institution to audit written sign-outs completed by 45 interns, using the UPDATED tool, which scores 7 aspects of sign-out communication linked to milestones. Intern sign-outs were audited by trained faculty members throughout the year. Results were incorporated into intern performance reviews and Clinical Competency Committees. Results A total of 136 sign-outs were audited (averaging 3.1 audits per intern). In the first trimester, 14 interns (31%) had satisfactory audit results. Five interns (11%) had critical deficiencies and received immediate feedback, and the remaining 26 (58%) were assigned future audits due to missing audits or unsatisfactory scores. In the second trimester, 21 interns (68%) had satisfactory results, 1 had critical deficiencies, and 9 (29%) required future audits. Nine of the 10 remaining interns in the final trimester had satisfactory audits. Faculty time was estimated at 10 to 15 minutes per sign-out audited. Conclusions The UPDATED audit is a milestone-based tool that can be used to assess written sign-out communication skills in internal medicine residency programs. Future work is planned to adapt the tool for use by senior supervisory residents to appraise sign-outs in real time. PMID:26221442

Piloting a Structured Practice Audit to Assess ACGME Milestones in Written Handoff Communication in Internal Medicine.

PubMed

Martin, Shannon K; Farnan, Jeanne M; McConville, John F; Arora, Vineet M

2015-06-01

Written communication skills are integral to patient care handoffs. Residency programs require feasible assessment tools that provide timely formative and summative feedback, ideally linked to the Accreditation Council for Graduate Medical Education Milestones. We describe the use of 1 such tool-UPDATED-to assess written handoff communication skills in internal medicine interns. During 2012-2013, the authors piloted a structured practice audit at 1 academic institution to audit written sign-outs completed by 45 interns, using the UPDATED tool, which scores 7 aspects of sign-out communication linked to milestones. Intern sign-outs were audited by trained faculty members throughout the year. Results were incorporated into intern performance reviews and Clinical Competency Committees. A total of 136 sign-outs were audited (averaging 3.1 audits per intern). In the first trimester, 14 interns (31%) had satisfactory audit results. Five interns (11%) had critical deficiencies and received immediate feedback, and the remaining 26 (58%) were assigned future audits due to missing audits or unsatisfactory scores. In the second trimester, 21 interns (68%) had satisfactory results, 1 had critical deficiencies, and 9 (29%) required future audits. Nine of the 10 remaining interns in the final trimester had satisfactory audits. Faculty time was estimated at 10 to 15 minutes per sign-out audited. The UPDATED audit is a milestone-based tool that can be used to assess written sign-out communication skills in internal medicine residency programs. Future work is planned to adapt the tool for use by senior supervisory residents to appraise sign-outs in real time.

Significance of Objective Structured Clinical Examinations to Plastic Surgery Residency Training.

PubMed

Simmons, Brian J; Zoghbi, Yasmina; Askari, Morad; Birnbach, David J; Shekhter, Ilya; Thaller, Seth R

2017-09-01

Objective structured clinical examinations (OSCEs) have proven to be a powerful tool. They possess more than a 30-year track record in assessing the competency of medical students, residents, and fellows. Objective structured clinical examinations have been used successfully in a variety of medical specialties, including surgery. They have recently found their way into the subspecialty of plastic surgery. This article uses a systematic review of the available literature on OSCEs and their recent use in plastic surgery. It incorporates survey results assessing program directors' views on the use of OSCEs. Approximately 40% of programs surveyed use OSCEs to assess the Accreditation Council for Graduate Medical Education core competencies. We found that 40% use OSCEs to evaluate specific plastic surgery milestones. Objective structured clinical examinations are usually performed annually. They cost anywhere between $100 and more than $1000 per resident. Four milestones giving residents the most difficulties on OSCEs were congenital anomalies, noncancer breast surgery, breast reconstruction, and practice-based learning and improvement. It was determined that challenges with milestones were due to lack of adequate general knowledge and surgical ward patient care, as well as deficits in professionalism and system-based problems. Programs were able to remediate weakness found by OSCEs using a variety of methods. Objective structured clinical examinations offer a unique tool to objectively assess the proficiency of residents in key areas of the Accreditation Council for Graduate Medical Education core competencies. In addition, they can be used to assess the specific milestones that plastic surgery residents must meet. This allows programs to identify and improve identified areas of weakness.

45 CFR 1308.14 - Eligibility criteria: Learning disabilities.

Code of Federal Regulations, 2013 CFR

2013-10-01

... achievement of developmental milestones and intellectual ability in one or more of these areas: oral... 45 Public Welfare 4 2013-10-01 2013-10-01 false Eligibility criteria: Learning disabilities. 1308... DISABILITIES Health Services Performance Standards § 1308.14 Eligibility criteria: Learning disabilities. (a) A...

45 CFR 1308.14 - Eligibility criteria: Learning disabilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

... achievement of developmental milestones and intellectual ability in one or more of these areas: oral... 45 Public Welfare 4 2014-10-01 2014-10-01 false Eligibility criteria: Learning disabilities. 1308... DISABILITIES Health Services Performance Standards § 1308.14 Eligibility criteria: Learning disabilities. (a) A...

45 CFR 1308.14 - Eligibility criteria: Learning disabilities.

Code of Federal Regulations, 2012 CFR

2012-10-01

... achievement of developmental milestones and intellectual ability in one or more of these areas: oral... 45 Public Welfare 4 2012-10-01 2012-10-01 false Eligibility criteria: Learning disabilities. 1308... DISABILITIES Health Services Performance Standards § 1308.14 Eligibility criteria: Learning disabilities. (a) A...

Fiber sensors for molecular detection

NASA Astrophysics Data System (ADS)

Gu, Claire; Yang, Xuan; Zhang, Jin; Newhouse, Rebecca; Cao, Liangcai

2010-11-01

The demand on sensors for detecting chemical and biological agents is greater than ever before, including medical, environmental, food safety, military, and security applications. At present, most detection or sensing techniques tend to be either non-molecular specific, bulky, expensive, relatively inaccurate, or unable to provide real time data. Clearly, alternative sensing technologies are urgently needed. Recently, we have been working to develop a compact fiber optic surface enhanced Raman scattering (SERS) sensor system that integrates various novel ideas to achieve compactness, high sensitivity and consistency, molecular specificity, and automatic preliminary identification capabilities. The unique sensor architecture is expected to bring SERS sensors to practical applications due to a combination of 1) novel SERS substrates that provide the high sensitivity and consistency, molecular specificity, and applicability to a wide range of compounds; 2) a unique hollow core optical fiber probe with double SERS substrate structure that provides the compactness, reliability, low cost, and ease of sampling; and 3) an innovative matched spectral filter set that provides automatic preliminary molecule identification. In this paper, we will review the principle of operation and some of the important milestones of fiber SERS sensor development with emphasis on our recent work to integrate photonic crystal fiber SERS probes with a portable Raman spectrometer and to demonstrate a matched spectral filter for molecule identification.

Milestone Age Affects the Role of Health and Emotions in Life Satisfaction: A Preliminary Inquiry.

PubMed

Miron-Shatz, Talya; Bhargave, Rajesh; Doniger, Glen M

2015-01-01

Jill turns 40. Should this change how she evaluates her life, and would a similar change occur when she turns 41? Milestone age (e.g., 30, 40, 50)--a naturally occurring feature in personal timelines--has received much attention is popular culture, but little attention in academic inquiry. This study examines whether milestone birthdays change the way people evaluate their life. We show that life outlook is impacted by this temporal landmark, which appears to punctuate people's mental maps of their life cycle. At these milestone junctures, people take stock of where they stand and have a more evaluative perspective towards their lives when making life satisfaction judgments. Correspondingly, they place less emphasis on daily emotional experiences. We find that milestone agers (vs. other individuals) place greater weight on health satisfaction and BMI and lesser weight on daily positive emotions in their overall life satisfaction judgments, whereas negative emotions remain influential.

From Kissing to Coitus? Sex-of-Partner Differences in the Sexual Milestone Achievement of Young Men

ERIC Educational Resources Information Center

Smiler, Andrew P.; Frankel, Loren B. W.; Savin-Williams, Ritch C.

2011-01-01

Scientific information regarding normative patterns of young men's sexual behavior is insufficient, especially regarding the impact of sex of partner. We explored the age at which 255 young adult men achieved several milestones (e.g., first kiss, manual-genital contact, intercourse) as well as the sequence of milestone achievement and stability in…

Thermal hydraulic simulations, error estimation and parameter sensitivity studies in Drekar::CFD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Thomas Michael; Shadid, John N.; Pawlowski, Roger P.

2014-01-01

This report describes work directed towards completion of the Thermal Hydraulics Methods (THM) CFD Level 3 Milestone THM.CFD.P7.05 for the Consortium for Advanced Simulation of Light Water Reactors (CASL) Nuclear Hub effort. The focus of this milestone was to demonstrate the thermal hydraulics and adjoint based error estimation and parameter sensitivity capabilities in the CFD code called Drekar::CFD. This milestone builds upon the capabilities demonstrated in three earlier milestones; THM.CFD.P4.02 [12], completed March, 31, 2012, THM.CFD.P5.01 [15] completed June 30, 2012 and THM.CFD.P5.01 [11] completed on October 31, 2012.

The relationship between social play and developmental milestones in wild chimpanzees (Pan troglodytes schweinfurthii).

PubMed

Heintz, Matthew R; Murray, Carson M; Markham, A Catherine; Pusey, Anne E; Lonsdorf, Elizabeth V

2017-12-01

Social play is common among many group-living animals, but the benefits are not well understood. Proposed benefits include increased muscle coordination as the result of increased locomotor versatility and development, and strengthened social bonds through interactions with like-aged individuals. In this study, we used 33 years of long-term behavioral data on infant chimpanzees in Gombe National Park, Tanzania, to examine these potential benefits of social play, specifically how the percentage of time engaged in social play relates to motor and social developmental milestones. We predicted that infants who engaged in more social play would achieve motor and social milestones at younger ages. We found that individuals that spent more time engaging in social play achieved the motor milestones of riding dorsally and traveling independently at earlier ages. Additionally, we found that the amount of play was correlated with earlier ages for reaching the social milestones of spatial independence from mother, first grooming of non-maternal kin, and first observed mating attempt. This is the first study in great apes to demonstrate a relationship between play behavior and developmental milestones, supporting the hypotheses that play provides motor, and social benefits. © 2017 Wiley Periodicals, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bello-Rivas, Juan M.; Elber, Ron; Department of Chemistry, University of Texas at Austin, Austin, Texas 78712

A new theory and an exact computer algorithm for calculating kinetics and thermodynamic properties of a particle system are described. The algorithm avoids trapping in metastable states, which are typical challenges for Molecular Dynamics (MD) simulations on rough energy landscapes. It is based on the division of the full space into Voronoi cells. Prior knowledge or coarse sampling of space points provides the centers of the Voronoi cells. Short time trajectories are computed between the boundaries of the cells that we call milestones and are used to determine fluxes at the milestones. The flux function, an essential component of themore » new theory, provides a complete description of the statistical mechanics of the system at the resolution of the milestones. We illustrate the accuracy and efficiency of the exact Milestoning approach by comparing numerical results obtained on a model system using exact Milestoning with the results of long trajectories and with a solution of the corresponding Fokker-Planck equation. The theory uses an equation that resembles the approximate Milestoning method that was introduced in 2004 [A. K. Faradjian and R. Elber, J. Chem. Phys. 120(23), 10880-10889 (2004)]. However, the current formulation is exact and is still significantly more efficient than straightforward MD simulations on the system studied.« less

Using a Curricular Vision to Define Entrustable Professional Activities for Medical Student Assessment.

PubMed

Hauer, Karen E; Boscardin, Christy; Fulton, Tracy B; Lucey, Catherine; Oza, Sandra; Teherani, Arianne

2015-09-01

The new UCSF Bridges Curriculum aims to prepare students to succeed in today's health care system while simultaneously improving it. Curriculum redesign requires assessment strategies that ensure that graduates achieve competence in enduring and emerging skills for clinical practice. To design entrustable professional activities (EPAs) for assessment in a new curriculum and gather evidence of content validity. University of California, San Francisco, School of Medicine. Nineteen medical educators participated; 14 completed both rounds of a Delphi survey. Authors describe 5 steps for defining EPAs that encompass a curricular vision including refining the vision, defining draft EPAs, developing EPAs and assessment strategies, defining competencies and milestones, and mapping milestones to EPAs. A Q-sort activity and Delphi survey involving local medical educators created consensus and prioritization for milestones for each EPA. For 4 EPAs, most milestones had content validity indices (CVIs) of at least 78 %. For 2 EPAs, 2 to 4 milestones did not achieve CVIs of 78 %. We demonstrate a stepwise procedure for developing EPAs that capture essential physician work activities defined by a curricular vision. Structured procedures for soliciting faculty feedback and mapping milestones to EPAs provide content validity.

Social Withdrawal Behaviour at One Year of Age Is Associated with Delays in Reaching Language Milestones in the EDEN Mother-Child Cohort Study

PubMed Central

Guedeney, Antoine; Forhan, Anne; de Agostini, Maria; Pingault, Jean-Baptiste; Heude, Barbara

2016-01-01

Objective The aim of the study was to examine the relationship between social withdrawal behaviour at one year and motor and language milestones. Materials and Methods One-year old children from the EDEN French population-based birth cohort study (Study on the pre- and postnatal determinants of the child’s development and prospective health Birth Cohort Study) were included. Social withdrawal at one year was assessed by trained midwives using the Alarm Distress BaBy (ADBB) scale. Midwives concurrently examined infants’ motor and language milestones. Parents reported on child’s psychomotor and language milestones, during the interview with the midwife. Results After adjusting for potential confounding factors, social withdrawal behaviour was significantly associated with concurrent delays in motor and language milestones assessed by the midwife or the parents. Discussion Higher scores on social withdrawal behaviour as assessed with the ADBB were associated with delays in reaching language milestones, and to a lesser extent with lower motor ability scores. Taking the contribution of social withdrawal behaviour into account may help understand the unfolding of developmental difficulties in children. PMID:27391482

Linear variable narrow bandpass optical filters in the far infrared (Conference Presentation)

NASA Astrophysics Data System (ADS)

Rahmlow, Thomas D.

2017-06-01

We are currently developing linear variable filters (LVF) with very high wavelength gradients. In the visible, these filters have a wavelength gradient of 50 to 100 nm/mm. In the infrared, the wavelength gradient covers the range of 500 to 900 microns/mm. Filter designs include band pass, long pass and ulta-high performance anti-reflection coatings. The active area of the filters is on the order of 5 to 30 mm along the wavelength gradient and up to 30 mm in the orthogonal, constant wavelength direction. Variation in performance along the constant direction is less than 1%. Repeatable performance from filter to filter, absolute placement of the filter relative to a substrate fiducial and, high in-band transmission across the full spectral band is demonstrated. Applications include order sorting filters, direct replacement of the spectrometer and hyper-spectral imaging. Off-band rejection with an optical density of greater than 3 allows use of the filter as an order sorting filter. The linear variable order sorting filters replaces other filter types such as block filters. The disadvantage of block filters is the loss of pixels due to the transition between filter blocks. The LVF is a continuous gradient without a discrete transition between filter wavelength regions. If the LVF is designed as a narrow band pass filter, it can be used in place of a spectrometer thus reducing overall sensor weight and cost while improving the robustness of the sensor. By controlling the orthogonal performance (smile) the LVF can be sized to the dimensions of the detector. When imaging on to a 2 dimensional array and operating the sensor in a push broom configuration, the LVF spectrometer performs as a hyper-spectral imager. This paper presents performance of LVF fabricated in the far infrared on substrates sized to available detectors. The impact of spot size, F-number and filter characterization are presented. Results are also compared to extended visible LVF filters.

Assessment of a membrane drinking water filter in an emergency setting.

PubMed

Ensink, Jeroen H J; Bastable, Andy; Cairncross, Sandy

2015-06-01

The performance and acceptability of the Nerox(TM) membrane drinking water filter were evaluated among an internally displaced population in Pakistan. The membrane filter and a control ceramic candle filter were distributed to over 3,000 households. Following a 6-month period, 230 households were visited and filter performance and use were assessed. Only 6% of the visited households still had a functioning filter, and the removal performance ranged from 80 to 93%. High turbidity in source water (irrigation canals), together with high temperatures and large family size were likely to have contributed to poor performance and uptake of the filters.

From Theory to Practice: Utilizing Competency-based Milestones to Assess Professional Growth and Development in the Foundational Science Blocks of a Pre-Clerkship Medical School Curriculum

PubMed Central

Pettepher, Cathleen C.; Lomis, Kimberly D.; Osheroff, Neil

2016-01-01

Physicians-in-training require skills and attitudes beyond medical knowledge in order to mature into successful clinicians. However, because assessments in pre-clerkship curricula historically have focused almost exclusively on medical knowledge, faculty contributions to early student development often have been limited. To address this challenge and enhance student progress, we re-designed our pre-clerkship curriculum to include settings in which diverse facets of student performance could be observed and fostered. Concurrently, we transitioned to an assessment strategy focused on competency-based milestones. The implementation of this strategy has allowed pre-clerkship science faculty to provide early-stage students with rich holistic feedback designed to stimulate their professional growth. PMID:27752401

From Theory to Practice: Utilizing Competency-based Milestones to Assess Professional Growth and Development in the Foundational Science Blocks of a Pre-Clerkship Medical School Curriculum.

PubMed

Pettepher, Cathleen C; Lomis, Kimberly D; Osheroff, Neil

2016-09-01

Physicians-in-training require skills and attitudes beyond medical knowledge in order to mature into successful clinicians. However, because assessments in pre-clerkship curricula historically have focused almost exclusively on medical knowledge, faculty contributions to early student development often have been limited. To address this challenge and enhance student progress, we re-designed our pre-clerkship curriculum to include settings in which diverse facets of student performance could be observed and fostered. Concurrently, we transitioned to an assessment strategy focused on competency-based milestones. The implementation of this strategy has allowed pre-clerkship science faculty to provide early-stage students with rich holistic feedback designed to stimulate their professional growth.

Advanced Initiation Systems Manufacturing Level 2 Milestone Completion Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chow, R; Schmidt, M

2009-10-01

Milestone Description - Advanced Initiation Systems Detonator Design and Prototype. Milestone Grading Criteria - Design new generation chip slapper detonator and manufacture a prototype using advanced manufacturing processes, such as all-dry chip metallization and solvent-less flyer coatings. The advanced processes have been developed for manufacturing detonators with high material compatibility and reliability to support future LEPs, e.g. the B61, and new weapons systems. Perform velocimetry measurements to determine slapper velocity as a function of flight distance. A prototype detonator assembly and stripline was designed for low-energy chip slappers. Pictures of the prototype detonator and stripline are shown. All-dry manufacturing processesmore » were used to address compatibility issues. KCP metallized the chips in a physical vapor deposition system through precision-aligned shadow masks. LLNL deposited a solvent-less polyimide flyer with a processes called SLIP, which stands for solvent-less vapor deposition followed by in-situ polymerization. LANL manufactured the high-surface-area (HSA) high explosive (HE) pellets. Test fires of two chip slapper designs, radius and bowtie, were performed at LLNL in the High Explosives Application Facility (HEAF). Test fires with HE were conducted to establish the threshold firing voltages. pictures of the chip slappers before and after test fires are shown. Velocimetry tests were then performed to obtain slapper velocities at or above the threshold firing voltages. Figure 5 shows the slapper velocity as a function of distance and time at the threshold voltage, for both radius and bowtie bridge designs. Both designs were successful at initiating the HE at low energy levels. Summary of Accomplishments are: (1) All-dry process for chip manufacture developed; (2) Solventless process for slapper materials developed; (3) High-surface area explosive pellets developed; (4) High performance chip slappers developed; (5) Low-energy chip slapper detonator designs; and (6) Low-voltage threshold chip slapper detonator demonstrated.« less

Functional Performance in Young Australian Children with Achondroplasia

ERIC Educational Resources Information Center

Ireland, Penelope Jane; McGill, James; Zankl, Andreas; Ware, Robert S.; Pacey, Verity; Ault, Jenny; Savarirayan, Ravi; Sillence, David; Thompson, Elizabeth M.; Townshend, Sharron; Johnston, Leanne Marie

2011-01-01

Aim: The aim of this study was to determine population-specific developmental milestones for independence in self-care, mobility, and social cognitive skills in children with achondroplasia, the most common skeletal dysplasia. Methods: Population-based recruitment from October 2008 to October 2010 identified 44 Australian children with…

Birth Cohort Differences in Sexual Identity Development Milestones among HIV-Negative Gay and Bisexual Men in the United States.

PubMed

Grov, Christian; Rendina, H Jonathon; Parsons, Jeffrey T

2017-10-12

The coming-out process for gay and bisexual men (GBM) involves crossing sexual identity development (SID) milestones: (1) self-awareness of sexual attraction to the same sex, (2) self-acceptance of an identity as gay or bisexual, (3) disclosure of this sexual identity to others, and (4) having sex with someone of the same sex. We examined trends in SID milestones by birth cohort in a 2015 U.S. national sample of GBM (n = 1,023). Birth cohort was independent of when men first felt sexually attracted to someone of the same sex (median age 11 to 12). However, with the exception of age of first same-sex attraction, older cohorts tended to pass other milestones at later ages than younger cohorts. Latent class analysis (LCA) of SID milestone patterns identified three subgroups. The majority (84%) began sexual identity development with same-sex attraction around the onset of puberty (i.e., around age 10) and progressed to self-identification, same-sex sexual activity, and coming out-in that order. The other two classes felt same-sex attraction during teen years (ages 12.5 to 18.0) but achieved the remaining SID milestones later in life. For 13% of men, this was during early adulthood; for 3% of men, this was in middle adulthood. Findings highlight the need to monitor ongoing generational differences in passing SID milestones.

Adaptive noise Wiener filter for scanning electron microscope imaging system.

PubMed

Sim, K S; Teh, V; Nia, M E

2016-01-01

Noise on scanning electron microscope (SEM) images is studied. Gaussian noise is the most common type of noise in SEM image. We developed a new noise reduction filter based on the Wiener filter. We compared the performance of this new filter namely adaptive noise Wiener (ANW) filter, with four common existing filters as well as average filter, median filter, Gaussian smoothing filter and the Wiener filter. Based on the experiments results the proposed new filter has better performance on different noise variance comparing to the other existing noise removal filters in the experiments. © Wiley Periodicals, Inc.

40 CFR 141.715 - Microbial toolbox options for meeting Cryptosporidium treatment requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... filter performance 0.5-log credit for combined filter effluent turbidity less than or equal to 0.15 NTU...) Individual filter performance 0.5-log credit (in addition to 0.5-log combined filter performance credit) if individual filter effluent turbidity is less than or equal to 0.15 NTU in at least 95 percent of samples each...

40 CFR 141.715 - Microbial toolbox options for meeting Cryptosporidium treatment requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... filter performance 0.5-log credit for combined filter effluent turbidity less than or equal to 0.15 NTU...) Individual filter performance 0.5-log credit (in addition to 0.5-log combined filter performance credit) if individual filter effluent turbidity is less than or equal to 0.15 NTU in at least 95 percent of samples each...

40 CFR 141.715 - Microbial toolbox options for meeting Cryptosporidium treatment requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... filter performance 0.5-log credit for combined filter effluent turbidity less than or equal to 0.15 NTU...) Individual filter performance 0.5-log credit (in addition to 0.5-log combined filter performance credit) if individual filter effluent turbidity is less than or equal to 0.15 NTU in at least 95 percent of samples each...

Automated near-real-time clinical performance feedback for anesthesiology residents: one piece of the milestones puzzle.

PubMed

Ehrenfeld, Jesse M; McEvoy, Matthew D; Furman, William R; Snyder, Dylan; Sandberg, Warren S

2014-01-01

Anesthesiology residencies are developing trainee assessment tools to evaluate 25 milestones that map to the six core competencies. The effort will be facilitated by development of automated methods to capture, assess, and report trainee performance to program directors, the Accreditation Council for Graduate Medical Education and the trainees themselves. The authors leveraged a perioperative information management system to develop an automated, near-real-time performance capture and feedback tool that provides objective data on clinical performance and requires minimal administrative effort. Before development, the authors surveyed trainees about satisfaction with clinical performance feedback and about preferences for future feedback. Resident performance on 24,154 completed cases has been incorporated into the authors' automated dashboard, and trainees now have access to their own performance data. Eighty percent (48 of 60) of the residents responded to the feedback survey. Overall, residents "agreed/strongly agreed" that they desire frequent updates on their clinical performance on defined quality metrics and that they desired to see how they compared with the residency as a whole. Before deployment of the new tool, they "disagreed" that they were receiving feedback in a timely manner. Survey results were used to guide the format of the feedback tool that has been implemented. The authors demonstrate the implementation of a system that provides near-real-time feedback concerning resident performance on an extensible series of quality metrics, and which is responsive to requests arising from resident feedback about desired reporting mechanisms.

Automated Near Real-Time Clinical Performance Feedback for Anesthesiology Residents: One Piece of the Milestones Puzzle

PubMed Central

Ehrenfeld, Jesse M.; McEvoy, Matthew D.; Furman, William R.; Snyder, Dylan; Sandberg, Warren S.

2014-01-01

Background Anesthesiology residencies are developing trainee assessment tools to evaluate 25 milestones that map to the 6 core competencies. The effort will be facilitated by development of automated methods to capture, assess, and report trainee performance to program directors, the Accreditation Council for Graduate Medical Education and the trainees themselves. Methods We leveraged a perioperative information management system to develop an automated, near-real-time performance capture and feedback tool that provides objective data on clinical performance and requires minimal administrative effort. Prior to development, we surveyed trainees about satisfaction with clinical performance feedback and about preferences for future feedback. Results Resident performance on 24,154 completed cases has been incorporated into our automated dashboard, and trainees now have access to their own performance data. Eighty percent (48 of 60) of our residents responded to the feedback survey. Overall, residents ‘agreed/strongly agreed’ that they desire frequent updates on their clinical performance on defined quality metrics and that they desired to see how they compared to the residency as a whole. Prior to deployment of the new tool, they ‘disagreed’ that they were receiving feedback in a timely manner. Survey results were used to guide the format of the feedback tool that has been implemented. Conclusions We demonstrate the implementation of a system that provides near real-time feedback concerning resident performance on an extensible series of quality metrics, and which is responsive to requests arising from resident feedback about desired reporting mechanisms. PMID:24398735

Teaching Preschoolers to Count: Effective Strategies for Achieving Early Mathematics Milestones

ERIC Educational Resources Information Center

Jacobi-Vessels, Jill L.; Brown, E. Todd; Molfese, Victoria J.; Do, Ahn

2016-01-01

Attention to early childhood mathematics instructional strategies has sharpened due to the relatively poor mathematics performance of U.S. students in comparison to students from other countries and research evidence that early mathematics skills impact later achievement. Early Childhood counting skills form the foundation for subsequent…

SOFIA pointing and chopping: performance and prospect

NASA Astrophysics Data System (ADS)

Reinacher, Andreas; Lammen, Yannick; Graf, Friederike; Jakob, Holger

2016-09-01

The Stratospheric Observatory for Infrared Astronomy (SOFIA) is a 2.5m infrared telescope built into a Boeing 747 SP. In 2014 SOFIA reached its Full Operational Capability milestone and nowadays takes off about three times a week to observe the infrared sky from altitudes above most of the atmosphere's water vapor content. Despite reaching this major milestone the work to improve the observatory's performance is continuing in many areas. This paper focuses on the telescope's current pointing and chopping performance and gives an overview over the ongoing and foreseen work to further improve in those two areas. Pointing performance as measured with the fast focal plane camera in flight is presented and based on that data it is elaborated how and in which frequency bands a further reduction of image jitter might be achieved. One contributor to the remaining jitter as well as the major actuator to reduce jitter with frequencies greater than 5 Hz is SOFIA's Secondary Mirror Assembly (SMA) or Chopper. As-is SMA jitter and chopping performance data as measured in flight is presented as well as recent improvements to the position sensor cabling and calibration and their effect on the SMA's pointing accuracy. Furthermore a brief description of a laboratory mockup of the SMA is given and the intended use of this mockup to test major hardware changes for further performance improvement is explained.

Optimal frequency domain textural edge detection filter

NASA Technical Reports Server (NTRS)

Townsend, J. K.; Shanmugan, K. S.; Frost, V. S.

1985-01-01

An optimal frequency domain textural edge detection filter is developed and its performance evaluated. For the given model and filter bandwidth, the filter maximizes the amount of output image energy placed within a specified resolution interval centered on the textural edge. Filter derivation is based on relating textural edge detection to tonal edge detection via the complex low-pass equivalent representation of narrowband bandpass signals and systems. The filter is specified in terms of the prolate spheroidal wave functions translated in frequency. Performance is evaluated using the asymptotic approximation version of the filter. This evaluation demonstrates satisfactory filter performance for ideal and nonideal textures. In addition, the filter can be adjusted to detect textural edges in noisy images at the expense of edge resolution.

20 CFR 411.581 - Can an EN receive milestone and outcome payments for months after a beneficiary takes his or her...

Code of Federal Regulations, 2011 CFR

2011-04-01

... assigned to an EN (or State VR agency acting as an EN) takes his or her ticket out of assignment (see § 411.145), the EN (or State VR agency) can receive payments under its elected payment system for milestones... EN or State VR agency based on the same milestone or outcome. [73 FR 29351, May 20, 2008] ...

20 CFR 411.560 - Is it possible to pay a milestone or outcome payment to more than one EN?

Code of Federal Regulations, 2010 CFR

2010-04-01

... (including a State VR agency acting as an EN) to receive payment based on the same milestone or outcome. If the beneficiary has assigned the ticket to more than one EN (or State VR agency acting as an EN) at different times, and more than one EN (or State VR agency) requests payment for the same milestone, outcome...

20 CFR 411.581 - Can an EN receive milestone and outcome payments for months after a beneficiary takes his or her...

Code of Federal Regulations, 2010 CFR

2010-04-01

... assigned to an EN (or State VR agency acting as an EN) takes his or her ticket out of assignment (see § 411.145), the EN (or State VR agency) can receive payments under its elected payment system for milestones... EN or State VR agency based on the same milestone or outcome. [73 FR 29351, May 20, 2008] ...

20 CFR 411.560 - Is it possible to pay a milestone or outcome payment to more than one EN?

Code of Federal Regulations, 2011 CFR

2011-04-01

... (including a State VR agency acting as an EN) to receive payment based on the same milestone or outcome. If the beneficiary has assigned the ticket to more than one EN (or State VR agency acting as an EN) at different times, and more than one EN (or State VR agency) requests payment for the same milestone, outcome...

Milestones: a rapid assessment method for the Clinical Competency Committee

PubMed Central

Nabors, Christopher; Forman, Leanne; Peterson, Stephen J.; Gennarelli, Melissa; Aronow, Wilbert S.; DeLorenzo, Lawrence; Chandy, Dipak; Ahn, Chul; Sule, Sachin; Stallings, Gary W.; Khera, Sahil; Palaniswamy, Chandrasekar; Frishman, William H.

2016-01-01

Introduction Educational milestones are now used to assess the developmental progress of all U.S. graduate medical residents during training. Twice annually, each program’s Clinical Competency Committee (CCC) makes these determinations and reports its findings to the Accreditation Council for Graduate Medical Education (ACGME). The ideal way to conduct the CCC is not known. After finding that deliberations reliant upon the new milestones were time intensive, our internal medicine residency program tested an approach designed to produce rapid but accurate assessments. Material and methods For this study, we modified our usual CCC process to include pre-meeting faculty ratings of resident milestones progress with in-meeting reconciliation of their ratings. Data were considered largely via standard report and presented in a pre-arranged pattern. Participants were surveyed regarding their perceptions of data management strategies and use of milestones. Reliability of competence assessments was estimated by comparing pre-/post-intervention class rank lists produced by individual committee members with a master class rank list produced by the collective CCC after full deliberation. Results Use of the study CCC approach reduced committee deliberation time from 25 min to 9 min per resident (p < 0.001). Committee members believed milestones improved their ability to identify and assess expected elements of competency development (p = 0.026). Individual committee member assessments of trainee progress agreed well with collective CCC assessments. Conclusions Modification of the clinical competency process to include pre-meeting competence ratings with in-meeting reconciliation of these ratings led to shorter deliberation times, improved evaluator satisfaction and resulted in reliable milestone assessments. PMID:28144272

Technological development of spectral filters for Sentinel-2

NASA Astrophysics Data System (ADS)

Schröter, Karin; Schallenberg, Uwe; Mohaupt, Matthias

2017-11-01

In the frame of the initiative for Global Monitoring for Environment and Security (GMES), jointly undertaken by the European Commission and the European Space Agency a technological development of two filter assemblies was performed for the Multi- Spectral Instrument (MSI) for Sentinel-2. The multispectral pushbroom imaging of the Earth will be performed in 10 VNIR bands (from 443 nm to 945nm) and 3 SWIR bands (from 1375 nm to 2190 nm). Possible filter coating techniques and masking concepts were considered in the frame of trade-off studies. The selected deposition concept is based on self-blocked all-dielectric multilayer band pass filter. Band pass and blocking characteristic is deposited on the space side of a single filter substrate whereas the detector side of the substrate has an antireflective coating. The space- and detector side masking design is realized by blades integrated in the mechanical parts including the mechanical interface to the filter assembly support on the MSI focal plane. The feasibility and required performance of the VNIR Filter Assembly and SWIR Filter Assembly were successfully demonstrated by breadboarding. Extensive performance tests of spectral and optical parameters and environmental tests (radiation, vibration, shock, thermal vacuum cycling, humidity) were performed on filter stripe- and filter assembly level. The presentation will contain a detailed description of the filter assembly design and the results of the performance and environmental tests.

Thermal control design of the Lightning Mapper Sensor narrow-band spectral filter

NASA Technical Reports Server (NTRS)

Flannery, Martin R.; Potter, John; Raab, Jeff R.; Manlief, Scott K.

1992-01-01

The performance of the Lightning Mapper Sensor is dependent on the temperature shifts of its narrowband spectral filter. To perform over a 10 degree FOV with an 0.8 nm bandwidth, the filter must be 15 cm in diameter and mounted externally to the telescope optics. The filter thermal control required a filter design optimized for minimum bandpass shift with temperature, a thermal analysis of substrate materials for maximum temperature uniformity, and a thermal radiation analysis to determine the parameter sensitivity of the radiation shield for the filter, the filter thermal recovery time after occultation, and heater power to maintain filter performance in the earth-staring geosynchronous environment.

Acquisition Reform: DOD Should Streamline Its Decision-Making Process for Weapon Systems to Reduce Inefficiencies

DTIC Science & Technology

2015-02-01

WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) U.S. Government Accountability Office,441 G Street NW,Washington,DC,20548 8...milestone decision process; and (3) alternative processes used by some DOD programs and leading commercial firms. To perform this work , GAO...Decision Makers 27 Abbreviations ACAT Acquisition Category DOD Department of Defense This is a work of the U.S

Speech and Language Impairments

MedlinePlus

... by a professional. ______________________ More on the Milestones of Language Development What are the milestones of typical speech-language development? What level of communication skill does a typical ...

Recent developments in the French programme for radioactive waste management planning Act of 28 june 2006

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ouzounian, G.

2007-07-01

In 2005, new developments on radioactive-waste management in France were marked mostly by the preparation of the 2006 milestone specified in the act of 30 December 1991. A bill on radioactive waste management has been prepared by the Government at the beginning of 2006 and passed to the French Parliament on 15 June 2006. The Planning Act on the sustainable management of radioactive materials and wastes has been drawn from the results of the 15 years of research performed by ANDRA and the CEA on 'partitioning and transmutation of long-lived radionuclides', 'deep geological disposal' and 'conditioning and long term interimmore » storage'. Major milestones during those two last years are presented, including reviews of the Dossier 2005, official reports, the Public Debate, and finally the Planning Act. (authors)« less

The role of aluminum in slow sand filtration.

PubMed

Weber-Shirk, Monroe L; Chan, Kwok Loon

2007-03-01

Engineering enhancement of slow sand filtration has been an enigma in large part because the mechanisms responsible for particle removal have not been well characterized. The presumed role of biological processes in the filter ripening process nearly precluded the possibility of enhancing filter performance since interventions to enhance biological activity would have required decreasing the quality of the influent water. In previous work, we documented that an acid soluble polymer controls filter performance. The new understanding that particle removal is controlled in large part by physical chemical mechanisms has expanded the possibilities of engineering slow sand filter performance. Herein, we explore the role of naturally occurring aluminum as a ripening agent for slow sand filters and the possibility of using a low dose of alum to improve filter performance or to ripen slow sand filters.

Low-loss interference filter arrays made by plasma-assisted reactive magnetron sputtering (PARMS) for high-performance multispectral imaging

NASA Astrophysics Data System (ADS)

Broßmann, Jan; Best, Thorsten; Bauer, Thomas; Jakobs, Stefan; Eisenhammer, Thomas

2016-10-01

Optical remote sensing of the earth from air and space typically utilizes several channels in the visible and near infrared spectrum. Thin-film optical interference filters, mostly of narrow bandpass type, are applied to select these channels. The filters are arranged in filter wheels, arrays of discrete stripe filters mounted in frames, or patterned arrays on a monolithic substrate. Such multi-channel filter assemblies can be mounted close to the detector, which allows a compact and lightweight camera design. Recent progress in image resolution and sensor sensitivity requires improvements of the optical filter performance. Higher demands placed on blocking in the UV and NIR and in between the spectral channels, in-band transmission and filter edge steepness as well as scattering lead to more complex filter coatings with thicknesses in the range of 10 - 25μm. Technological limits of the conventionally used ion-assisted evaporation process (IAD) can be overcome only by more precise and higher-energetic coating technologies like plasma-assisted reactive magnetron sputtering (PARMS) in combination with optical broadband monitoring. Optics Balzers has developed a photolithographic patterning process for coating thicknesses up to 15μm that is fully compatible with the advanced PARMS coating technology. This provides the possibility of depositing multiple complex high-performance filters on a monolithic substrate. We present an overview of the performance of recently developed filters with improved spectral performance designed for both monolithic filter-arrays and stripe filters mounted in frames. The pros and cons as well as the resulting limits of the filter designs for both configurations are discussed.

Edge Preserved Speckle Noise Reduction Using Integrated Fuzzy Filters

PubMed Central

Dewal, M. L.; Rohit, Manoj Kumar

2014-01-01

Echocardiographic images are inherent with speckle noise which makes visual reading and analysis quite difficult. The multiplicative speckle noise masks finer details, necessary for diagnosis of abnormalities. A novel speckle reduction technique based on integration of geometric, wiener, and fuzzy filters is proposed and analyzed in this paper. The denoising applications of fuzzy filters are studied and analyzed along with 26 denoising techniques. It is observed that geometric filter retains noise and, to address this issue, wiener filter is embedded into the geometric filter during iteration process. The performance of geometric-wiener filter is further enhanced using fuzzy filters and the proposed despeckling techniques are called integrated fuzzy filters. Fuzzy filters based on moving average and median value are employed in the integrated fuzzy filters. The performances of integrated fuzzy filters are tested on echocardiographic images and synthetic images in terms of image quality metrics. It is observed that the performance parameters are highest in case of integrated fuzzy filters in comparison to fuzzy and geometric-fuzzy filters. The clinical validation reveals that the output images obtained using geometric-wiener, integrated fuzzy, nonlocal means, and details preserving anisotropic diffusion filters are acceptable. The necessary finer details are retained in the denoised echocardiographic images. PMID:27437499

The potential for improving rail international intermodal services in Texas and the southwest region of the United States.

DOT National Transportation Integrated Search

2011-06-01

The report covers a period of great significance for railroading in the U.S as it contains a number of milestones now : shaping the future performance of the industry. The specific subject is improving intermodal service so that it can : support stat...

A Working Model for the Development, Implementation and Evaluation of an Art Program on the College Level.

ERIC Educational Resources Information Center

Demery, Marie; And Others

Components of an art program that was developed with federal funding are outlined. The model contains information on the grant proposal, including the rationale for funding, implementation strategies, activity timetable, qualifications of key personnel, activity objectives and performance measures, intitutional goals, activity milestones, and…

77 FR 10939 - Driving Innovation and Creating Jobs in Rural America Through Biobased and Sustainable Product...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... Related to Executive Order 13514. (a) Agencies shall include and report on biobased acquisition as part of the sustainable acquisition goals and milestones in the Strategic Sustainability Performance Plan... Budget (OMB) shall emphasize biobased purchasing in the fiscal year 2012 and 2013 Sustainability/Energy...

Deliberate Laterality Practice Facilitates Sensory-Motor Processing in Developing Children

ERIC Educational Resources Information Center

Pedersen, Scott J.

2014-01-01

Background: The innate ability for typically developing children to attain developmental motor milestones early in life has been a thoroughly researched area of inquiry. Nonetheless, as children grow and are required to perform more complex motor skills in order to experience success in physical activity and sport pursuits, the range of…

2014 Report on the Milestones for the US National Plan to Address Alzheimer's Disease.

PubMed

Fargo, Keith N; Aisen, Paul; Albert, Marilyn; Au, Rhoda; Corrada, Maria M; DeKosky, Steven; Drachman, David; Fillit, Howard; Gitlin, Laura; Haas, Magali; Herrup, Karl; Kawas, Claudia; Khachaturian, Ara S; Khachaturian, Zaven S; Klunk, William; Knopman, David; Kukull, Walter A; Lamb, Bruce; Logsdon, Rebecca G; Maruff, Paul; Mesulam, Marsel; Mobley, William; Mohs, Richard; Morgan, David; Nixon, Ralph A; Paul, Steven; Petersen, Ronald; Plassman, Brenda; Potter, William; Reiman, Eric; Reisberg, Barry; Sano, Mary; Schindler, Rachel; Schneider, Lon S; Snyder, Peter J; Sperling, Reisa A; Yaffe, Kristine; Bain, Lisa J; Thies, William H; Carrillo, Maria C

2014-10-01

With increasing numbers of people with Alzheimer's and other dementias across the globe, many countries have developed national plans to deal with the resulting challenges. In the United States, the National Alzheimer's Project Act, signed into law in 2011, required the creation of such a plan with annual updates thereafter. Pursuant to this, the US Department of Health and Human Services (HHS) released the National Plan to Address Alzheimer's Disease in 2012, including an ambitious research goal of preventing and effectively treating Alzheimer's disease by 2025. To guide investments, activities, and the measurement of progress toward achieving this 2025 goal, in its first annual plan update (2013) HHS also incorporated into the plan a set of short, medium and long-term milestones. HHS further committed to updating these milestones on an ongoing basis to account for progress and setbacks, and emerging opportunities and obstacles. To assist HHS as it updates these milestones, the Alzheimer's Association convened a National Plan Milestone Workgroup consisting of scientific experts representing all areas of Alzheimer's and dementia research. The workgroup evaluated each milestone and made recommendations to ensure that they collectively constitute an adequate work plan for reaching the goal of preventing and effectively treating Alzheimer's by 2025. This report presents these Workgroup recommendations. Copyright © 2014 The Alzheimer's Association. Published by Elsevier Inc. All rights reserved.

Retrospective Recall of Sexual Orientation Identity Development Among Gay, Lesbian, and Bisexual Adults

PubMed Central

Calzo, Jerel P.; Antonucci, Toni C.; Mays, Vickie M.; Cochran, Susan D.

2011-01-01

Although recent attention has focused on the likelihood that contemporary sexual minority youth (i.e., gay, lesbian, bisexual [GLB]) are “coming out” at younger ages, few studies have examined if early sexual orientation identity development is also present in older GLB cohorts. We analyze retrospective data on the timing of sexual orientation milestones in a sample of sexual minorities drawn from the California Quality of Life Surveys. Latent profile analysis of 1,260 GLB adults, ages 18-84 years identified three trajectories of development: Early (n = 951, milestones spanning ages 12 to 20), Middle (n = 239, milestones spanning ages 18 to 31), and Late (n = 70, milestones spanning ages 32 to 43). Motivated by previous research on variability in adolescent developmental trajectories, post-hoc analyses of the Early Profile group identified two sub-groups: Child-Onset (n = 284, milestones spanning ages 8 to 18), and Teen-Onset (n = 667, milestones spanning ages 14 to 22). Nearly all patterns of development were identity-centered, with average age of self-identification as GLB preceding average age of first same-sex sexual activity. Overall, younger participants and the majority of older participants were classified to the Early Profile, suggesting that early development is common regardless of age cohort. The additional gender differences observed in the onset and pace of sexual orientation identity development warrant future research. PMID:21942662

Study of the use of a nonlinear, rate limited, filter on pilot control signals

NASA Technical Reports Server (NTRS)

Adams, J. J.

1977-01-01

The use of a filter on the pilot's control output could improve the performance of the pilot-aircraft system. What is needed is a filter with a sharp high frequency cut-off, no resonance peak, and a minimum of lag at low frequencies. The present investigation studies the usefulness of a nonlinear, rate limited, filter in performing the needed function. The nonlinear filter is compared with a linear, first order filter, and no filter. An analytical study using pilot models and a simulation study using experienced test pilots was performed. The results showed that the nonlinear filter does promote quick, steady maneuvering. It is shown that the nonlinear filter attenuates the high frequency remnant and adds less phase lag to the low frequency signal than does the linear filter. It is also shown that the rate limit in the nonlinear filter can be set to be too restrictive, causing an unstable pilot-aircraft system response.

Fermilab Today - Guidelines

Science.gov Websites

range of story topics, including: Professional achievements and milestones (awards, retirements, records -saving practices at the lab Research milestones, records Scientific research, advances in technology The

The Advanced Photovoltaic Solar Array (APSA) technology status and performance

NASA Technical Reports Server (NTRS)

Stella, Paul M.; Kurland, Richard M.

1991-01-01

In 1985, the Jet Propulsion Laboratory initiated the Advanced Photovoltaic Solar Array (APSA) program. The program objective is to demonstrate a producible array system by the early 1990s with a specific performance of at least 130 W/kG (beginning-of-life) as an intermediate milestone towards the long range goal of 300 W/kG. The APSA performance represents an approximately four-fold improvement over existing rigid array technology and a doubling of the performance of the first generation NASA/OAST SAFE flexible blanket array of the early 1980s.

Filter Selection for Optimizing the Spectral Sensitivity of Broadband Multispectral Cameras Based on Maximum Linear Independence.

PubMed

Li, Sui-Xian

2018-05-07

Previous research has shown that the effectiveness of selecting filter sets from among a large set of commercial broadband filters by a vector analysis method based on maximum linear independence (MLI). However, the traditional MLI approach is suboptimal due to the need to predefine the first filter of the selected filter set to be the maximum ℓ₂ norm among all available filters. An exhaustive imaging simulation with every single filter serving as the first filter is conducted to investigate the features of the most competent filter set. From the simulation, the characteristics of the most competent filter set are discovered. Besides minimization of the condition number, the geometric features of the best-performed filter set comprise a distinct transmittance peak along the wavelength axis of the first filter, a generally uniform distribution for the peaks of the filters and substantial overlaps of the transmittance curves of the adjacent filters. Therefore, the best-performed filter sets can be recognized intuitively by simple vector analysis and just a few experimental verifications. A practical two-step framework for selecting optimal filter set is recommended, which guarantees a significant enhancement of the performance of the systems. This work should be useful for optimizing the spectral sensitivity of broadband multispectral imaging sensors.

Developmental milestones record - 2 years

MedlinePlus

... hour or less is better. Avoid programming with violent content. Redirect the child to reading or play activities. Control the type of games the child plays. Alternative Names Growth milestones for ...

Modeling error analysis of stationary linear discrete-time filters

NASA Technical Reports Server (NTRS)

Patel, R.; Toda, M.

1977-01-01

The performance of Kalman-type, linear, discrete-time filters in the presence of modeling errors is considered. The discussion is limited to stationary performance, and bounds are obtained for the performance index, the mean-squared error of estimates for suboptimal and optimal (Kalman) filters. The computation of these bounds requires information on only the model matrices and the range of errors for these matrices. Consequently, a design can easily compare the performance of a suboptimal filter with that of the optimal filter, when only the range of errors in the elements of the model matrices is available.

Improving particle filters in rainfall-runoff models: application of the resample-move step and development of the ensemble Gaussian particle filter

NASA Astrophysics Data System (ADS)

Plaza Guingla, D. A.; Pauwels, V. R.; De Lannoy, G. J.; Matgen, P.; Giustarini, L.; De Keyser, R.

2012-12-01

The objective of this work is to analyze the improvement in the performance of the particle filter by including a resample-move step or by using a modified Gaussian particle filter. Specifically, the standard particle filter structure is altered by the inclusion of the Markov chain Monte Carlo move step. The second choice adopted in this study uses the moments of an ensemble Kalman filter analysis to define the importance density function within the Gaussian particle filter structure. Both variants of the standard particle filter are used in the assimilation of densely sampled discharge records into a conceptual rainfall-runoff model. In order to quantify the obtained improvement, discharge root mean square errors are compared for different particle filters, as well as for the ensemble Kalman filter. First, a synthetic experiment is carried out. The results indicate that the performance of the standard particle filter can be improved by the inclusion of the resample-move step, but its effectiveness is limited to situations with limited particle impoverishment. The results also show that the modified Gaussian particle filter outperforms the rest of the filters. Second, a real experiment is carried out in order to validate the findings from the synthetic experiment. The addition of the resample-move step does not show a considerable improvement due to performance limitations in the standard particle filter with real data. On the other hand, when an optimal importance density function is used in the Gaussian particle filter, the results show a considerably improved performance of the particle filter.

Identification of Causes and Treatments for Chronic Pain in a Model of Gulf War Illness

DTIC Science & Technology

2017-10-01

saline delivered. Euthanasia and necropsy at days 5 and 20 post acidic/normal saline, and tissue analysis performed ( ELISA , Western Blot, LC-MS...performed ( ELISA , Western Blot, LC-MS). Milestone 3: the association between GWI-induced musculoskeletal pain and neuroinflammation, as well as the...thresholds. Serum samples analysed by ELISA . Major Task 7: Acidic/normal saline administered 180 days after final DFP injection; pharmacological reversal

Single and tandem Fabry-Perot etalons as solar background filters for lidar.

PubMed

McKay, J A

1999-09-20

Atmospheric lidar is difficult in daylight because of sunlight scattered into the receiver field of view. In this research methods for the design and performance analysis of Fabry-Perot etalons as solar background filters are presented. The factor by which the signal to background ratio is enhanced is defined as a measure of the performance of the etalon as a filter. Equations for evaluating this parameter are presented for single-, double-, and triple-etalon filter systems. The role of reflective coupling between etalons is examined and shown to substantially reduce the contributions of the second and third etalons to the filter performance. Attenuators placed between the etalons can improve the filter performance, at modest cost to the signal transmittance. The principal parameter governing the performance of the etalon filters is the etalon defect finesse. Practical limitations on etalon plate smoothness and parallelism cause the defect finesse to be relatively low, especially in the ultraviolet, and this sets upper limits to the capability of tandem etalon filters to suppress the solar background at tolerable cost to the signal.

COMPUTATIONS ON THE PERFORMANCE OF PARTICLE FILTERS AND ELECTRONIC AIR CLEANERS

EPA Science Inventory

The paper discusses computations on the performance of particle filters and electronic air cleaners (EACs). The collection efficiency of particle filters and ACs is calculable if certain factors can be assumed or calibrated. For fibrous particulate filters, measurement of colle...

Experimental investigation of the effect of inlet particle properties on the capture efficiency in an exhaust particulate filter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Viswanathan, Sandeep; Rothamer, David; Zelenyuk, Alla

The impact of inlet particle properties on the filtration performance of clean and particulate matter (PM) laden cordierite filter samples was evaluated using PM generated by a spark-ignition direct-injection (SIDI) engine fuelled with tier II EEE certification gasoline. Prior to the filtration experiments, a scanning mobility particle spectrometer (SMPS) was used to measure the electrical-mobility based particle size distribution (PSD) in the SIDI exhaust from distinct engine operating conditions. An advanced aerosol characterization system that comprised of a centrifugal particle mass analyser (CPMA), a differential mobility analyser (DMA), and a single particle mass spectrometer (SPLAT II) was used to obtainmore » additional information on the SIDI particulate, including particle composition, mass, and dynamic shape factors (DSFs) in the transition () and free-molecular () flow regimes. During the filtration experiments, real-time measurements of PSDs upstream and downstream of the filter sample were used to estimate the filtration performance and the total trapped mass within the filter using an integrated particle size distribution method. The filter loading process was paused multiple times to evaluate the filtration performance in the partially loaded state. The change in vacuum aerodynamic diameter () distribution of mass-selected particles was examined for flow through the filter to identify whether preferential capture of particles of certain shapes occurred in the filter. The filter was also probed using different inlet PSDs to understand their impact on particle capture within the filter sample. Results from the filtration experiment suggest that pausing the filter loading process and subsequently performing the filter probing experiments did not impact the overall evolution of filtration performance. Within the present distribution of particle sizes, filter efficiency was independent of particle shape potentially due to the diffusion-dominant filtration process. Particle mobility diameter and trapped mass within the filter appeared to be the dominant parameters that impacted filter performance.« less

Terry Turbopump Expanded Operating Band Full-Scale Component and Basic Science Detailed Test Plan - Final.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Osborn, Douglas; Solom, Matthew

This document details the milestone approach to define the true operating limitations (margins) of the Terry turbopump systems used in the nuclear industry for Milestone 3 (full-scale component experiments) and Milestone 4 (Terry turbopump basic science experiments) efforts. The overall multinational-sponsored program creates the technical basis to: (1) reduce and defer additional utility costs, (2) simplify plant operations, and (3) provide a better understanding of the true margin which could reduce overall risk of operations.

Terry Turbopump Expanded Operating Band Full-Scale Component and Basic Science Detailed Test Plan-Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solom, Matthew; Ross, Kyle; Cardoni, Jeffrey N.

This document details the milestone approach to define the true operating limitations (margins) of the Terry turbopump systems used in the nuclear industry for Milestone 3 (full-scale component experiments) and Milestone 4 (Terry turbopump basic science experiments) efforts. The overall multinational-sponsored program creates the technical basis to: (1) reduce and defer additional utility costs, (2) simplify plant operations, and (3) provide a better understanding of the true margin which could reduce overall risk of operations.

A Needs Assessment of Air Force Systems Command Buying Activity Acquisition Management Information System (AMIS) Users

DTIC Science & Technology

1989-09-01

Guidelines Generation #2 b. Electronic Submission of Commerce Business Daily ( CBD ) Notices #6 c. On-line Debarred/Suspended List #5 d. On-Line Contract...a number of years. Reality of system differs from manual. One reference - easy to follow, block by block - is needed. -Imaging and CBD electronic...milestones are tracked - and those milestones should be monitored as a natural outcome of thc process - e.g. A milestone is noted when the RFP is

Precursors to the Development of Anxiety Disorders in Young Children with Autism Spectrum Disorder

DTIC Science & Technology

2016-10-01

SOR and anxiety measures 6/29/2017 48% 48% 48% Milestone #12: Publish results of study on risk factors for anxiety in young children with ASD. 9...with ASD Milestone #14: Publish study on the role of anxiety as a mediator of the impact of SOR on negative outcomes for children with ASD. 9/29...48% 48% Milestone #18: Results of study on automated coding as a valid measure of attention in young children with ASD are published 9/29/2017

What Shape is Your Resident in? Using a Radar Plot to Guide a Milestone Clinical Competency Discussion.

PubMed

Harrington, David T; Miner, Thomas J; Ng, Thomas; Charpentier, Kevin P; Richardson, Pam; Cioffi, William G

2015-01-01

One of the challenges for program directors (PDs) is to sort and weight the tidal wave of assessments that training programs create in the modern Milestone era. We evaluated whether the use of a radar plot (RP) would be helpful in sorting data and providing a graphic representation of each resident's progress. Using at least 2 different types of assessments for each of the 16 surgical Milestones, the data were ranked and weighted by a predetermined method embedded in a computerized workbook (Excel). This process created a unique 16-spoked RP for each resident (Fig. below). The RP allowed the faculty to see areas of weakness (shown by concavity) and allowed an overall grade calculated as a ratio of the area of the smooth outer circle (faculty expectations, triangles) and the resident's unique radar shape (resident performance, squares). To help us validate our new tool, we looked at whether residents with recent remedial issues "looked" different from residents without remedial issues. Of our 30 categorical residents, 8 had significant areas of concavities, suggesting possible areas of improvement. Of these 8 residents, 4 had been on a remediation program in the last 18 months. The average ratio of performance/expectations was 0.709. The 4 residents on recent remediation had a ratio of 0.616 when compared with 0.723 for the residents without remedial issues (p < 0.009). Many exciting challenges await PDs, as we evolve to a competency-based evaluation system. The use of an evaluation summary tool using RPs may aid PDs in leading clinical competency discussions and in monitoring a resident's progress over time. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Maximum correntropy square-root cubature Kalman filter with application to SINS/GPS integrated systems.

PubMed

Liu, Xi; Qu, Hua; Zhao, Jihong; Yue, Pengcheng

2018-05-31

For a nonlinear system, the cubature Kalman filter (CKF) and its square-root version are useful methods to solve the state estimation problems, and both can obtain good performance in Gaussian noises. However, their performances often degrade significantly in the face of non-Gaussian noises, particularly when the measurements are contaminated by some heavy-tailed impulsive noises. By utilizing the maximum correntropy criterion (MCC) to improve the robust performance instead of traditional minimum mean square error (MMSE) criterion, a new square-root nonlinear filter is proposed in this study, named as the maximum correntropy square-root cubature Kalman filter (MCSCKF). The new filter not only retains the advantage of square-root cubature Kalman filter (SCKF), but also exhibits robust performance against heavy-tailed non-Gaussian noises. A judgment condition that avoids numerical problem is also given. The results of two illustrative examples, especially the SINS/GPS integrated systems, demonstrate the desirable performance of the proposed filter. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Project Work Plan 100-N Area Strontium-90 Treatability Demonstration Project: Phytoremediation Along the 100-N Columbia River Riparian Zone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ainsworth, Calvin C.

The 100-N Area Innovative Treatment and Remediation Demonstration (ITRD) identified phyto¬remediation as a potential technology both for the removal of 90Sr from the soil of the riparian zone and as a filter for groundwater along the Columbia River. Recent greenhouse and growth chamber studies have demonstrated the viability of phytoextraction to remove 90Sr from this area’s soil/water; in conjunction with monitored natural attenuation and an apatite barrier the process would make an effective treatment for remediation of the 100-N Area 90Sr plume. All activities associated with the 100-NR-1 and 100-NR-2 Operable Units of the Hanford 100-N Area have had, andmore » continue to have, significant regulatory and stakeholder participation. Beginning in 1998 with the ITRD process, presentations to the ITRD TAG were heavily attended by EPA, Washington State Department of Ecology, and stakeholders. In addition, three workshops have been held to receive regulatory and stakeholder feedback on monitored natural attenuation, the apatite barrier, and phytoremediation; these were held in Richland in August 2003, December 2004, and August 2005. The apatite injection treatability test plan (DOE 2005) describes phytoremediation as a technology to be evaluated during the March 2008 evaluation milestone as described in the Tri-Party Agreement change request (M-16-06-01 Change Control Form). If, during this evaluation milestone, phytoremediation is favorably evaluated it would be incorporated into the treatability test plan. The phytoremediation treatability test described in this proposal is strongly supported by the Washington State Department of Ecology.« less

Optical ranked-order filtering using threshold decomposition

DOEpatents

Allebach, Jan P.; Ochoa, Ellen; Sweeney, Donald W.

1990-01-01

A hybrid optical/electronic system performs median filtering and related ranked-order operations using threshold decomposition to encode the image. Threshold decomposition transforms the nonlinear neighborhood ranking operation into a linear space-invariant filtering step followed by a point-to-point threshold comparison step. Spatial multiplexing allows parallel processing of all the threshold components as well as recombination by a second linear, space-invariant filtering step. An incoherent optical correlation system performs the linear filtering, using a magneto-optic spatial light modulator as the input device and a computer-generated hologram in the filter plane. Thresholding is done electronically. By adjusting the value of the threshold, the same architecture is used to perform median, minimum, and maximum filtering of images. A totally optical system is also disclosed.

Developmental milestones record

MedlinePlus

... in the early years is to follow your child's development. Most parents also watch for different milestones. Talk ... child's provider if you have concerns about your child's development. Closely watching a "checklist" or calendar of developmental ...

Spacecraft attitude determination using a second-order nonlinear filter

NASA Technical Reports Server (NTRS)

Vathsal, S.

1987-01-01

The stringent attitude determination accuracy and faster slew maneuver requirements demanded by present-day spacecraft control systems motivate the development of recursive nonlinear filters for attitude estimation. This paper presents the second-order filter development for the estimation of attitude quaternion using three-axis gyro and star tracker measurement data. Performance comparisons have been made by computer simulation of system models and filter mechanization. It is shown that the second-order filter consistently performs better than the extended Kalman filter when the performance index of the root sum square estimation error of the quaternion vector is compared. The second-order filter identifies the gyro drift rates faster than the extended Kalman filter. The uniqueness of this algorithm is the online generation of the time-varying process and measurement noise covariance matrices, derived as a function or the process and measurement nonlinearity, respectively.

Milestone M3FT-15OR0203112. Build redesigned HFIR rabbit capsules and make ready for insertion for irradiation in HFIR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howard, Richard H; McDuffee, Joel Lee; Okuniewski, Maria A.

2015-09-01

This report details the fabrication and delivery of two Fuel Cycle Research and Development irradiation capsules (FCRP20 and FCRP03), with associated quality assurance documentation, to the High Flux Isotope Reactor. The capsules and documentation were delivered by September 30, 2015, thus meeting the deadline for milestone M3FT-15OR0203112. These irradiation experiments irradiate metal parallelepiped specimens that may consist of various compositions including uranium metal, steel, etc. This document contains a copy of the completed capsule fabrication request sheets, which detail all constituent components, pertinent drawings, etc., along with a detailed summary of the capsule assembly process performed by the Thermal Hydraulicsmore » and Irradiation Engineering Group (THIEG) in the Reactor and Nuclear Systems Division. A complete fabrication package record is maintained by THIEG and is available upon request.« less

PERFORMANCE OF OVID MEDLINE SEARCH FILTERS TO IDENTIFY HEALTH STATE UTILITY STUDIES.

PubMed

Arber, Mick; Garcia, Sonia; Veale, Thomas; Edwards, Mary; Shaw, Alison; Glanville, Julie M

2017-01-01

This study was designed to assess the sensitivity of three Ovid MEDLINE search filters developed to identify studies reporting health state utility values (HSUVs), to improve the performance of the best performing filter, and to validate resulting search filters. Three quasi-gold standard sets (QGS1, QGS2, QGS3) of relevant studies were harvested from reviews of studies reporting HSUVs. The performance of three initial filters was assessed by measuring their relative recall of studies in QGS1. The best performing filter was then developed further using QGS2. This resulted in three final search filters (FSF1, FSF2, and FSF3), which were validated using QGS3. FSF1 (sensitivity maximizing) retrieved 132/139 records (sensitivity: 95 percent) in the QGS3 validation set. FSF1 had a number needed to read (NNR) of 842. FSF2 (balancing sensitivity and precision) retrieved 128/139 records (sensitivity: 92 percent) with a NNR of 502. FSF3 (precision maximizing) retrieved 123/139 records (sensitivity: 88 percent) with a NNR of 383. We have developed and validated a search filter (FSF1) to identify studies reporting HSUVs with high sensitivity (95 percent) and two other search filters (FSF2 and FSF3) with reasonably high sensitivity (92 percent and 88 percent) but greater precision, resulting in a lower NNR. These seem to be the first validated filters available for HSUVs. The availability of filters with a range of sensitivity and precision options enables researchers to choose the filter which is most appropriate to the resources available for their specific research.

10 CFR 603.570 - Determining milestone payment amounts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Pre-Award Business Evaluation Accounting, Payments, and Recovery of Funds § 603.570 Determining... share for early milestones if a project involves a start-up company with limited resources. (c) For an...

Speech and Language Problems in Children

MedlinePlus

Children vary in their development of speech and language skills. Health care professionals have lists of milestones ... normal. These milestones help figure out whether a child is on track or if he or she ...

Infant Development: Birth to 3 Months

MedlinePlus

... major infant development milestones from birth to 3 months — and know what to do when something's not ... A lot happens during your baby's first three months. Most babies reach certain milestones at similar ages, ...

Sexual identity trajectories among sexual-minority youths: gender comparisons.

PubMed

Savin-Williams, R C; Diamond, L M

2000-12-01

The present investigation explored gender differences in sexual identity development--first same-sex attractions, self-labeling, same-sex sexual contact, and disclosure--among 164 sexual-minority young adults. Based on interviews, results indicated the value of assessing gender differences in the context, timing, spacing, and sequencing of sexual identity milestones. Adolescent males had an earlier onset of all milestones except disclosure. The context for sexual identity milestones were likely to be emotionally oriented for young women and sexually oriented for young men. The gap from first same-sex attractions (8-9 years of age) to first disclosure (around 18 years) averaged 10 years for both sexes. Young women followed label-first developmental trajectories; men were more likely to pursue sex before identifying themselves as gay. In terms of achieving sexual identity milestones, gender mattered, but it was not everything.

Summary Report for ASC L2 Milestone #4782: Assess Newly Emerging Programming and Memory Models for Advanced Architectures on Integrated Codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neely, J. R.; Hornung, R.; Black, A.

This document serves as a detailed companion to the powerpoint slides presented as part of the ASC L2 milestone review for Integrated Codes milestone #4782 titled “Assess Newly Emerging Programming and Memory Models for Advanced Architectures on Integrated Codes”, due on 9/30/2014, and presented for formal program review on 9/12/2014. The program review committee is represented by Mike Zika (A Program Project Lead for Kull), Brian Pudliner (B Program Project Lead for Ares), Scott Futral (DEG Group Lead in LC), and Mike Glass (Sierra Project Lead at Sandia). This document, along with the presentation materials, and a letter of completionmore » signed by the review committee will act as proof of completion for this milestone.« less

Impact on house staff evaluation scores when changing from a Dreyfus- to a Milestone-based evaluation model: one internal medicine residency program's findings.

PubMed

Friedman, Karen A; Balwan, Sandy; Cacace, Frank; Katona, Kyle; Sunday, Suzanne; Chaudhry, Saima

2014-01-01

As graduate medical education (GME) moves into the Next Accreditation System (NAS), programs must take a critical look at their current models of evaluation and assess how well they align with reporting outcomes. Our objective was to assess the impact on house staff evaluation scores when transitioning from a Dreyfus-based model of evaluation to a Milestone-based model of evaluation. Milestones are a key component of the NAS. We analyzed all end of rotation evaluations of house staff completed by faculty for academic years 2010-2011 (pre-Dreyfus model) and 2011-2012 (post-Milestone model) in one large university-based internal medicine residency training program. Main measures included change in PGY-level average score; slope, range, and separation of average scores across all six Accreditation Council for Graduate Medical Education (ACGME) competencies. Transitioning from a Dreyfus-based model to a Milestone-based model resulted in a larger separation in the scores between our three post-graduate year classes, a steeper progression of scores in the PGY-1 class, a wider use of the 5-point scale on our global end of rotation evaluation form, and a downward shift in the PGY-1 scores and an upward shift in the PGY-3 scores. For faculty trained in both models of assessment, the Milestone-based model had greater discriminatory ability as evidenced by the larger separation in the scores for all the classes, in particular the PGY-1 class.

Distributed sensor coordination for advanced energy systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tumer, Kagan

Motivation: The ability to collect key system level information is critical to the safe, efficient and reliable operation of advanced power systems. Recent advances in sensor technology have enabled some level of decision making directly at the sensor level. However, coordinating large numbers of sensors, particularly heterogeneous sensors, to achieve system level objectives such as predicting plant efficiency, reducing downtime or predicting outages requires sophisticated coordination algorithms. Indeed, a critical issue in such systems is how to ensure the interaction of a large number of heterogenous system components do not interfere with one another and lead to undesirable behavior. Objectivesmore » and Contributions: The long-term objective of this work is to provide sensor deployment, coordination and networking algorithms for large numbers of sensors to ensure the safe, reliable, and robust operation of advanced energy systems. Our two specific objectives are to: 1. Derive sensor performance metrics for heterogeneous sensor networks. 2. Demonstrate effectiveness, scalability and reconfigurability of heterogeneous sensor network in advanced power systems. The key technical contribution of this work is to push the coordination step to the design of the objective functions of the sensors, allowing networks of heterogeneous sensors to be controlled. By ensuring that the control and coordination is not specific to particular sensor hardware, this approach enables the design and operation of large heterogeneous sensor networks. In addition to the coordination coordination mechanism, this approach allows the system to be reconfigured in response to changing needs (e.g., sudden external events requiring new responses) or changing sensor network characteristics (e.g., sudden changes to plant condition). Impact: The impact of this work extends to a large class of problems relevant to the National Energy Technology Laboratory including sensor placement, heterogeneous sensor coordination, and sensor network control in advanced power systems. Each application has specific needs, but they all share the one crucial underlying problem: how to ensure that the interactions of a large number of heterogenous agents lead to coordinated system behavior. This proposal describes a new paradigm that addresses that very issue in a systematic way. Key Results and Findings: All milestones have been completed. Our results demonstrate that by properly shaping agent objective functions, we can develop large (up to 10,000 devices) heterogeneous sensor networks with key desirable properties. The first milestone shows that properly choosing agent-specific objective functions increases system performance by up to 99.9% compared to global evaluations. The second milestone shows evolutionary algorithms learn excellent sensor network coordination policies prior to network deployment, and these policies can be refined online once the network is deployed. The third milestone shows the resulting sensor networks networks are extremely robust to sensor noise, where networks with up to 25% sensor noise are capable of providing measurements with errors on the order of 10⁻³. The fourth milestone shows the resulting sensor networks are extremely robust to sensor failure, with 25% of the sensors in the system failing resulting in no significant performance losses after system reconfiguration.« less

Air Force Research Laboratory Technology Milestones 2008

DTIC Science & Technology

2008-01-01

futuristic ‘bots will possess self - healing properties as well, enhancing their resiliency to damage sustained during such missions. Leading the SuperBot...Matrix Composites Pollution Prevention Materials Polymeric Materials Power and Chemical Processes Quantitative Defect Characterization Robotics ...advanced self -sealing CMC manufactured by French company Snecma Propulsion Solide (SPS). Thus far, the seals have performed extremely well, and a

The Space Launch System: NASA's Exploration Rocket

NASA Technical Reports Server (NTRS)

Blackerby, Christopher; Cate, Hugh C., III

2013-01-01

Powerful, versatile, and capable vehicle for entirely new missions to deep space. Vital to NASA's exploration strategy and the Nation's space agenda. Safe, affordable, and sustainable. Engaging the U.S. aerospace workforce and infrastructure. Competitive opportunities for innovations that affordably upgrade performance. Successfully meeting milestones in preparation for Preliminary Design Review in 2013. On course for first flight in 2017.

The Point of the Point: Washington's Student Achievement Initiative through the Looking Glass of a Community College

ERIC Educational Resources Information Center

Li, Amy Y.

2017-01-01

For 8 years Washington State has operated a performance funding policy, the Student Achievement Initiative (SAI). The policy allocates appropriations to the state's 34 community and technical colleges based on points earned through student achievement of college-readiness, retention, and completion milestones. Grounded in a conceptual framework of…

Comparison of Sigma-Point and Extended Kalman Filters on a Realistic Orbit Determination Scenario

NASA Technical Reports Server (NTRS)

Gaebler, John; Hur-Diaz. Sun; Carpenter, Russell

2010-01-01

Sigma-point filters have received a lot of attention in recent years as a better alternative to extended Kalman filters for highly nonlinear problems. In this paper, we compare the performance of the additive divided difference sigma-point filter to the extended Kalman filter when applied to orbit determination of a realistic operational scenario based on the Interstellar Boundary Explorer mission. For the scenario studied, both filters provided equivalent results. The performance of each is discussed in detail.

GPS vertical axis performance enhancement for helicopter precision landing approach

NASA Technical Reports Server (NTRS)

Denaro, Robert P.; Beser, Jacques

1986-01-01

Several areas were investigated for improving vertical accuracy for a rotorcraft using the differential Global Positioning System (GPS) during a landing approach. Continuous deltaranging was studied and the potential improvement achieved by estimating acceleration was studied by comparing the performance on a constant acceleration turn and a rough landing profile of several filters: a position-velocity (PV) filter, a position-velocity-constant acceleration (PVAC) filter, and a position-velocity-turning acceleration (PVAT) filter. In overall statistics, the PVAC filter was found to be most efficient with the more complex PVAT performing equally well. Vertical performance was not significantly different among the filters. Satellite selection algorithms based on vertical errors only (vertical dilution of precision or VDOP) and even-weighted cross-track and vertical errors (XVDOP) were tested. The inclusion of an altimeter was studied by modifying the PVAC filter to include a baro bias estimate. Improved vertical accuracy during degraded DOP conditions resulted. Flight test results for raw differential results excluding filter effects indicated that the differential performance significantly improved overall navigation accuracy. A landing glidepath steering algorithm was devised which exploits the flexibility of GPS in determining precise relative position. A method for propagating the steering command over the GPS update interval was implemented.

40 CFR 141.718 - Treatment performance toolbox components.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (a) Combined filter performance. Systems using conventional filtration treatment or direct filtration... the criteria in this paragraph. Combined filter effluent (CFE) turbidity must be less than or equal to... § 141.74(a) and (c). (b) Individual filter performance. Systems using conventional filtration treatment...

40 CFR 141.718 - Treatment performance toolbox components.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... (a) Combined filter performance. Systems using conventional filtration treatment or direct filtration... the criteria in this paragraph. Combined filter effluent (CFE) turbidity must be less than or equal to... § 141.74(a) and (c). (b) Individual filter performance. Systems using conventional filtration treatment...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shoopman, J. D.

This report documents Livermore Computing (LC) activities in support of ASC L2 milestone 5589: Modernization and Expansion of LLNL Archive Disk Cache, due March 31, 2016. The full text of the milestone is included in Attachment 1. The description of the milestone is: Description: Configuration of archival disk cache systems will be modernized to reduce fragmentation, and new, higher capacity disk subsystems will be deployed. This will enhance archival disk cache capability for ASC archive users, enabling files written to the archives to remain resident on disk for many (6–12) months, regardless of file size. The milestone was completed inmore » three phases. On August 26, 2015 subsystems with 6PB of disk cache were deployed for production use in LLNL’s unclassified HPSS environment. Following that, on September 23, 2015 subsystems with 9 PB of disk cache were deployed for production use in LLNL’s classified HPSS environment. On January 31, 2016, the milestone was fully satisfied when the legacy Data Direct Networks (DDN) archive disk cache subsystems were fully retired from production use in both LLNL’s unclassified and classified HPSS environments, and only the newly deployed systems were in use.« less

Miniaturized High-Temperature Superconducting/Dielectric Multilayer Filters for Satellite Communications

NASA Technical Reports Server (NTRS)

Miranda, Felix A.

1997-01-01

Most communication satellites contain well over a hundred filters in their payload. Current technology in typical satellite multiplexers use dual-mode cavity or dielectric resonator filters that are large (approx. 25 to 125 cu in) and heavy (up to 600 g). As the complexity of future advanced electronic systems for satellite communications increases, even more filters will be needed, requiring filter miniaturization without performance degradation. Such improvements in filter technology will enhance satellite performance. To reduce the size, weight, and cost of the multiplexers without compromising performance, the NASA Lewis Research Center is collaborating with industry to develop a new class of dual-mode multilayer filters consisting of YBa2Cu3O7-delta high-temperature superconducting (HTS) thin films on LaAlO3 substrates.

Optical ranked-order filtering using threshold decomposition

DOEpatents

Allebach, J.P.; Ochoa, E.; Sweeney, D.W.

1987-10-09

A hybrid optical/electronic system performs median filtering and related ranked-order operations using threshold decomposition to encode the image. Threshold decomposition transforms the nonlinear neighborhood ranking operation into a linear space-invariant filtering step followed by a point-to-point threshold comparison step. Spatial multiplexing allows parallel processing of all the threshold components as well as recombination by a second linear, space-invariant filtering step. An incoherent optical correlation system performs the linear filtering, using a magneto-optic spatial light modulator as the input device and a computer-generated hologram in the filter plane. Thresholding is done electronically. By adjusting the value of the threshold, the same architecture is used to perform median, minimum, and maximum filtering of images. A totally optical system is also disclosed. 3 figs.

If You're Concerned - Act Early

MedlinePlus

... fill out a Milestone Checklist to track your child’s development. Share the completed checklist or milestone summary with ... Developmental pediatricians. These doctors have special training in child development and children with special needs. Child neurologists. These ...

Infant Development: Milestones from 7 to 9 Months

MedlinePlus

... Infant development milestones for a 7- to 9-month-old include sitting, standing and laughing. By Mayo ... her own pace. From ages 7 to 9 months, your baby is likely to experience: Advancing motor ...

A superior edge preserving filter with a systematic analysis

NASA Technical Reports Server (NTRS)

Holladay, Kenneth W.; Rickman, Doug

1991-01-01

A new, adaptive, edge preserving filter for use in image processing is presented. It had superior performance when compared to other filters. Termed the contiguous K-average, it aggregates pixels by examining all pixels contiguous to an existing cluster and adding the pixel closest to the mean of the existing cluster. The process is iterated until K pixels were accumulated. Rather than simply compare the visual results of processing with this operator to other filters, some approaches were developed which allow quantitative evaluation of how well and filter performs. Particular attention is given to the standard deviation of noise within a feature and the stability of imagery under iterative processing. Demonstrations illustrate the performance of several filters to discriminate against noise and retain edges, the effect of filtering as a preprocessing step, and the utility of the contiguous K-average filter when used with remote sensing data.

Pattern recognition with composite correlation filters designed with multi-object combinatorial optimization

DOE PAGES

Awwal, Abdul; Diaz-Ramirez, Victor H.; Cuevas, Andres; ...

2014-10-23

Composite correlation filters are used for solving a wide variety of pattern recognition problems. These filters are given by a combination of several training templates chosen by a designer in an ad hoc manner. In this work, we present a new approach for the design of composite filters based on multi-objective combinatorial optimization. Given a vast search space of training templates, an iterative algorithm is used to synthesize a filter with an optimized performance in terms of several competing criteria. Furthermore, by employing a suggested binary-search procedure a filter bank with a minimum number of filters can be constructed, formore » a prespecified trade-off of performance metrics. Computer simulation results obtained with the proposed method in recognizing geometrically distorted versions of a target in cluttered and noisy scenes are discussed and compared in terms of recognition performance and complexity with existing state-of-the-art filters.« less

Pattern recognition with composite correlation filters designed with multi-object combinatorial optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Awwal, Abdul; Diaz-Ramirez, Victor H.; Cuevas, Andres

Composite correlation filters are used for solving a wide variety of pattern recognition problems. These filters are given by a combination of several training templates chosen by a designer in an ad hoc manner. In this work, we present a new approach for the design of composite filters based on multi-objective combinatorial optimization. Given a vast search space of training templates, an iterative algorithm is used to synthesize a filter with an optimized performance in terms of several competing criteria. Furthermore, by employing a suggested binary-search procedure a filter bank with a minimum number of filters can be constructed, formore » a prespecified trade-off of performance metrics. Computer simulation results obtained with the proposed method in recognizing geometrically distorted versions of a target in cluttered and noisy scenes are discussed and compared in terms of recognition performance and complexity with existing state-of-the-art filters.« less

Multi-Disciplinary Analysis and Optimization Frameworks

NASA Technical Reports Server (NTRS)

Naiman, Cynthia Gutierrez

2009-01-01

Since July 2008, the Multidisciplinary Analysis & Optimization Working Group (MDAO WG) of the Systems Analysis Design & Optimization (SAD&O) discipline in the Fundamental Aeronautics Program s Subsonic Fixed Wing (SFW) project completed one major milestone, Define Architecture & Interfaces for Next Generation Open Source MDAO Framework Milestone (9/30/08), and is completing the Generation 1 Framework validation milestone, which is due December 2008. Included in the presentation are: details of progress on developing the Open MDAO framework, modeling and testing the Generation 1 Framework, progress toward establishing partnerships with external parties, and discussion of additional potential collaborations

Nuclear Cryogenic Propulsion Stage (NCPS) Fuel Element Testing in the Nuclear Thermal Rocket Element Environmental Simulator (NTREES)

NASA Technical Reports Server (NTRS)

Emrich, William J., Jr.

2017-01-01

To satisfy the Nuclear Cryogenic Propulsion Stage (NCPS) testing milestone, a graphite composite fuel element using a uranium simulant was received from the Oakridge National Lab and tested in the Nuclear Thermal Rocket Element Environmental Simulator (NTREES) at various operating conditions. The nominal operating conditions required to satisfy the milestone consisted of running the fuel element for a few minutes at a temperature of at least 2000 K with flowing hydrogen. This milestone test was successfully accomplished without incident.

Solar Total Energy Project (STEP) Performance Analysis of High Temperature Energy Storage Subsystem

NASA Technical Reports Server (NTRS)

Moore, D. M.

1984-01-01

The 1982 milestones and lessons learned; performance in 1983; a typical day's operation; collector field performance and thermal losses; and formal testing are highlighted. An initial test that involves characterizing the high temperature storage (hts) subsystem is emphasized. The primary element is on 11,000 gallon storage tank that provides energy to the steam generator during transient solar conditions or extends operating time. Overnight, thermal losses were analyzed. The length of time the system is operated at various levels of cogeneration using stored energy is reviewed.

Zinc and iron supplementation on motor and language milestone scores of infants and toddlers

PubMed Central

Surkan, Pamela J.; Siegel, Emily H.; Patel, Shivani; Katz, Joanne; Khatry, Subarna K.; Stoltzfus, Rebecca J.; LeClerq, Steven C.; Tielsch, James M.

2013-01-01

Objective To assess the effects of zinc and iron-folic acid supplementation on motor and language milestones in Nepali children. Methods A total of 544 children 4–17 months old residing in Ishwarpur, Nepal were randomized to receive placebo, iron-folic acid, zinc and zinc plus iron-folic acid daily. Data were collected at baseline and at three month intervals for one year. Main effects of zinc and iron folic-acid supplementation were estimated for motor and language milestones. We modeled crude and adjusted mean cumulative changes in scores between visits 1 and 5, and adjusted rates-of-change. Results Adjusted differences in motor milestone scores between visits 1 and 5 and rates-of-change were not significantly different for zinc and non-zinc groups (adj. β=−0.7, 95% CI: −1.4, 0.01; adj. β=−0.1, 95% CI:−0.5, 0.3, respectively). Motor milestones in children receiving and not receiving iron supplements were not significantly different (adj. β=0.1, 95% CI:−0.7, 0.8 from visit 1 to 5; adj. β=0.1, 95% CI:−0.3, 0.5 for rate-of-change). Children receiving zinc had a 0.8 lower mean crude change in language score between visits 1 and 5 compared to children not receiving zinc (95% CI −1.3,−0.3), but significance was lost after adjustment (adj. β=−0.2, 95% CI:−0.6, 0.2, comparing visits 1 to 5; β=−0.1, 95% CI:−0.3, 0.2 for rate-of-change). We observed no significant difference in motor or language milestone scores due to iron supplementation.. Conclusion After one year, neither zinc nor iron-folic acid supplementation in Nepali children improved attainment of motor or language milestones. PMID:23298972

Grayscale Optical Correlator Workbench

NASA Technical Reports Server (NTRS)

Hanan, Jay; Zhou, Hanying; Chao, Tien-Hsin

2006-01-01

Grayscale Optical Correlator Workbench (GOCWB) is a computer program for use in automatic target recognition (ATR). GOCWB performs ATR with an accurate simulation of a hardware grayscale optical correlator (GOC). This simulation is performed to test filters that are created in GOCWB. Thus, GOCWB can be used as a stand-alone ATR software tool or in combination with GOC hardware for building (target training), testing, and optimization of filters. The software is divided into three main parts, denoted filter, testing, and training. The training part is used for assembling training images as input to a filter. The filter part is used for combining training images into a filter and optimizing that filter. The testing part is used for testing new filters and for general simulation of GOC output. The current version of GOCWB relies on the mathematical software tools from MATLAB binaries for performing matrix operations and fast Fourier transforms. Optimization of filters is based on an algorithm, known as OT-MACH, in which variables specified by the user are parameterized and the best filter is selected on the basis of an average result for correct identification of targets in multiple test images.

Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport- Demonstration of Approach and Results on Used Fuel Performance Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adkins, Harold; Geelhood, Ken; Koeppel, Brian

2013-09-30

This document addresses Oak Ridge National Laboratory milestone M2FT-13OR0822015 Demonstration of Approach and Results on Used Nuclear Fuel Performance Characterization. This report provides results of the initial demonstration of the modeling capability developed to perform preliminary deterministic evaluations of moderate-to-high burnup used nuclear fuel (UNF) mechanical performance under normal conditions of storage (NCS) and normal conditions of transport (NCT) conditions. This report also provides results from the sensitivity studies that have been performed. Finally, discussion on the long-term goals and objectives of this initiative are provided.

Space The New Medical Frontier / NASA Spinoffs Milestones in Space Research

MedlinePlus

... occasion. Photo courtesy of NIH Long-Term Space Research Until the advent of the ISS, research missions ... improving human health." NASA Spinoffs Milestones in Space Research Inspired by the space suits Apollo astronauts wore ...

The changing face of transportation

DOT National Transportation Integrated Search

2000-01-01

This document reviews the major transportation policy milestones of the last 25 years, the social and economic context for those milestones, and looks ahead to the year 2025. The chapter headings include the following: Visions Past and Future; Growth...

Multi-tap complex-coefficient incoherent microwave photonic filters based on optical single-sideband modulation and narrow band optical filtering.

PubMed

Sagues, Mikel; García Olcina, Raimundo; Loayssa, Alayn; Sales, Salvador; Capmany, José

2008-01-07

We propose a novel scheme to implement tunable multi-tap complex coefficient filters based on optical single sideband modulation and narrow band optical filtering. A four tap filter is experimentally demonstrated to highlight the enhanced tuning performance provided by complex coefficients. Optical processing is performed by the use of a cascade of four phase-shifted fiber Bragg gratings specifically fabricated for this purpose.

PARTICLE REMOVAL AND HEAD LOSS DEVELOPMENT IN BIOLOGICAL FILTERS

EPA Science Inventory

The physical performance of granular media filters was studied under pre-chlorinated, backwash-chlorinated, and nonchlorinated conditions. Overall, biological filteration produced a high-quality water. Although effluent turbidities showed littleer difference between the perform...

Impact on house staff evaluation scores when changing from a Dreyfus- to a Milestone-based evaluation model: one internal medicine residency program's findings.

PubMed

Friedman, Karen A; Balwan, Sandy; Cacace, Frank; Katona, Kyle; Sunday, Suzanne; Chaudhry, Saima

2014-01-01

Purpose As graduate medical education (GME) moves into the Next Accreditation System (NAS), programs must take a critical look at their current models of evaluation and assess how well they align with reporting outcomes. Our objective was to assess the impact on house staff evaluation scores when transitioning from a Dreyfus-based model of evaluation to a Milestone-based model of evaluation. Milestones are a key component of the NAS. Method We analyzed all end of rotation evaluations of house staff completed by faculty for academic years 2010-2011 (pre-Dreyfus model) and 2011-2012 (post-Milestone model) in one large university-based internal medicine residency training program. Main measures included change in PGY-level average score; slope, range, and separation of average scores across all six Accreditation Council for Graduate Medical Education (ACGME) competencies. Results Transitioning from a Dreyfus-based model to a Milestone-based model resulted in a larger separation in the scores between our three post-graduate year classes, a steeper progression of scores in the PGY-1 class, a wider use of the 5-point scale on our global end of rotation evaluation form, and a downward shift in the PGY-1 scores and an upward shift in the PGY-3 scores. Conclusions For faculty trained in both models of assessment, the Milestone-based model had greater discriminatory ability as evidenced by the larger separation in the scores for all the classes, in particular the PGY-1 class.

Milestone Ratings and Supervisory Role Categorizations Swim Together, but is the Water Muddy?

PubMed

Schumacher, Daniel J; Bartlett, Kathleen W; Elliott, Sean P; Michelson, Catherine; Sharma, Tanvi; Garfunkel, Lynn C; King, Beth; Schwartz, Alan

2018-06-17

This single specialty, multi-institutional study aimed to determine: 1) the association between milestone ratings for individual competencies and average milestone ratings (AMRs) and 2) the association between AMRs and recommended supervisory role categorizations made by individual clinical competency committee (CCC) members. During the 2015-16 academic year, CCC members at 14 pediatric residencies reported milestone ratings for 21 competencies and recommended supervisory role categories (may not supervise, may supervise in some settings, may supervise in all settings) for residents they reviewed. An exploratory factor analysis of competencies was conducted. The associations between individual competencies, the AMR, and supervisory role categorizations were determined by computing bivariate correlations. The relationship between AMRs and recommended supervisory role categorizations was examined using an ordinal mixed logistic regression model. 68/155 CCC members completed both milestone assignments and supervision categorizations for 451 residents. Factor analysis of individual competencies controlling for clustering of residents in raters and sites resulted in a single-factor solution (cumulative variance 0.75). All individual competencies had large positive correlations with the AMR (correlation coefficient: 0.84-0.93), except for two professionalism competencies (Prof1: 0.63 and Prof4: 0.65). When combined across training year and time points, the AMR and supervisory role categorization had a moderately positive correlation (0.56). This exploratory study identified a modest correlation between average milestone ratings and supervisory role categorization. Convergence of competencies on a single factor deserves further exploration, with possible rater effects warranting attention. Copyright © 2018. Published by Elsevier Inc.

Recursive Algorithms for Real-Time Digital CR-RCn Pulse Shaping

NASA Astrophysics Data System (ADS)

Nakhostin, M.

2011-10-01

This paper reports on recursive algorithms for real-time implementation of CR-(RC)n filters in digital nuclear spectroscopy systems. The algorithms are derived by calculating the Z-transfer function of the filters for filter orders up to n=4 . The performances of the filters are compared with the performance of the conventional digital trapezoidal filter using a noise generator which separately generates pure series, 1/f and parallel noise. The results of our study enable one to select the optimum digital filter for different noise and rate conditions.

Performance Evaluation of Glottal Inverse Filtering Algorithms Using a Physiologically Based Articulatory Speech Synthesizer

DTIC Science & Technology

2017-01-05

1 Performance Evaluation of Glottal Inverse Filtering Algorithms Using a Physiologically Based Articulatory Speech Synthesizer Yu-Ren Chien, Daryush...D. Mehta, Member, IEEE, Jón Guðnason, Matías Zañartu, Member, IEEE, and Thomas F. Quatieri, Fellow, IEEE Abstract—Glottal inverse filtering aims to...of inverse filtering performance has been challenging due to the practical difficulty in measuring the true glottal signals while speech signals are

Level-2 Milestone 3504: Scalable Applications Preparations and Outreach for the Sequoia ID (Dawn)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Futral, W. Scott; Gyllenhaal, John C.; Hedges, Richard M.

2010-07-02

This report documents LLNL SAP project activities in anticipation of the ASC Sequoia system, ASC L2 milestone 3504: Scalable Applications Preparations and Outreach for the Sequoia ID (Dawn), due June 30, 2010.

Hydrogen milestone could help lower fossil fuel refining costs

ScienceCinema

Stephen Herring

2017-12-09

Hydrogen researchers at the U.S. Department of Energy's Idaho National Laboratory have reached another milestone on the road to reducing carbon emissions and protecting the nation against the effects of peaking world oil production. Stephen Herring, lab

Milestones Since Last Workshop [Global Positioning System Adjacent Band Compatibility Assessment Workshop V, 10/14/2016

DOT National Transportation Integrated Search

2016-10-14

Milestones Since Last Workshop - Finalized GPS/GNSS receiver test plan and test procedures - Coordinated government and manufacturer participation and executed Non-Disclosure Agreements (NDAs) - Developed/validated radiated RF test environment - Carr...

Milestones in Cancer Research and Discovery

Cancer.gov

During the past 250 years, we have witnessed many landmark discoveries in our efforts to make progress against cancer, an affliction known to humanity for thousands of years. This timeline shows a few key milestones in the history of cancer research.

Immunizations and Developmental Milestones for Your Child from Birth Through 6 Years Old

MedlinePlus

... type b n Hib Pneumococcal n PCV Inactivated Poliovirus n IPV Influenza (Flu) Milestones should be achieved ... type b n Hib Pneumococcal n PCV Inactivated Poliovirus n IPV Influenza (Flu) n Influenza, first dose ...

Performance evaluation of an asynchronous multisensor track fusion filter

NASA Astrophysics Data System (ADS)

Alouani, Ali T.; Gray, John E.; McCabe, D. H.

2003-08-01

Recently the authors developed a new filter that uses data generated by asynchronous sensors to produce a state estimate that is optimal in the minimum mean square sense. The solution accounts for communications delay between sensors platform and fusion center. It also deals with out of sequence data as well as latent data by processing the information in a batch-like manner. This paper compares, using simulated targets and Monte Carlo simulations, the performance of the filter to the optimal sequential processing approach. It was found that the new asynchronous Multisensor track fusion filter (AMSTFF) performance is identical to that of the extended sequential Kalman filter (SEKF), while the new filter updates its track at a much lower rate than the SEKF.

PERFORMANCE IMPROVEMENT OF CROSS-FLOW FILTRATION FOR HIGH LEVEL WASTE TREATMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duignan, M.; Nash, C.; Poirier, M.

2011-01-12

In the interest of accelerating waste treatment processing, the DOE has funded studies to better understand filtration with the goal of improving filter fluxes in existing cross-flow equipment. The Savannah River National Laboratory (SRNL) was included in those studies, with a focus on start-up techniques, filter cake development, the application of filter aids (cake forming solid precoats), and body feeds (flux enhancing polymers). This paper discusses the progress of those filter studies. Cross-flow filtration is a key process step in many operating and planned waste treatment facilities to separate undissolved solids from supernate slurries. This separation technology generally has themore » advantage of self-cleaning through the action of wall shear stress created by the flow of waste slurry through the filter tubes. However, the ability of filter wall self-cleaning depends on the slurry being filtered. Many of the alkaline radioactive wastes are extremely challenging to filtration, e.g., those containing compounds of aluminum and iron, which have particles whose size and morphology reduce permeability. Unfortunately, low filter flux can be a bottleneck in waste processing facilities such as the Savannah River Modular Caustic Side Solvent Extraction Unit and the Hanford Waste Treatment Plant. Any improvement to the filtration rate would lead directly to increased throughput of the entire process. To date increased rates are generally realized by either increasing the cross-flow filter axial flowrate, limited by pump capacity, or by increasing filter surface area, limited by space and increasing the required pump load. SRNL set up both dead-end and cross-flow filter tests to better understand filter performance based on filter media structure, flow conditions, filter cleaning, and several different types of filter aids and body feeds. Using non-radioactive simulated wastes, both chemically and physically similar to the actual radioactive wastes, the authors performed several tests to demonstrate increases in filter performance. With the proper use of filter flow conditions and filter enhancers, filter flow rates can be increased over rates currently realized today.« less

Top Down Implementation Plan for system performance test software

NASA Technical Reports Server (NTRS)

Jacobson, G. N.; Spinak, A.

1982-01-01

The top down implementation plan used for the development of system performance test software during the Mark IV-A era is described. The plan is based upon the identification of the hierarchical relationship of the individual elements of the software design, the development of a sequence of functionally oriented demonstrable steps, the allocation of subroutines to the specific step where they are first required, and objective status reporting. The results are: determination of milestones, improved managerial visibility, better project control, and a successful software development.

TACCDAS Testbed Human Factors Evaluation Methodology,

DTIC Science & Technology

1980-03-01

3 TEST METHOD Development of performance criteria................... 8 Test participant identification ...................... 8 Control of...major milestones involved in the evaluation process leading up to the evaluation of the complete testbed in the field are identified. Test methods and...inevitably will be different in several ways from the intended system as foreseen by the system designers. The system users provide insights into these

Virtual Environment TBI Screen (VETS)

DTIC Science & Technology

2014-10-01

balance challenges performed on a modified Wii Balance Board . Implementation of this device will enhance current approaches in TBI and mild TBI (i.e...TBI) screen (VETS) device in measuring standing balance . This system consists of software, a Wii balance board , and a large screen television that...Validate Wii ™ Balance Board relative to NeuroCom forceplate ! Running Wii Balance Board validation protocol. ! Milestone Achieved:

Development Risk Methodology for Whole Systems Trade Analysis

DTIC Science & Technology

2016-08-01

Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202- 4302. Respondents should be aware that notwithstanding...JCIDS - Joint Capabilities Integration and Development System L - Likelihood MS - Milestone O&S - Operations and Sustainment P.95 - 95th...and their consequences. These dimensions are: performance, unit cost, operations & sustainment (O&S) cost, development risk, and growth potential

Calibration sources and filters of the soft x-ray spectrometer instrument on the Hitomi spacecraft

NASA Astrophysics Data System (ADS)

de Vries, Cor P.; Haas, Daniel; Yamasaki, Noriko Y.; Herder, Jan-Willem den; Paltani, Stephane; Kilbourne, Caroline; Tsujimoto, Masahiro; Eckart, Megan E.; Leutenegger, Maurice A.; Costantini, Elisa; Dercksen, Johannes P. C.; Dubbeldam, Luc; Frericks, Martin; Laubert, Phillip P.; van Loon, Sander; Lowes, Paul; McCalden, Alec J.; Porter, Frederick S.; Ruijter, Jos; Wolfs, Rob

2018-01-01

The soft x-ray spectrometer was designed to operate onboard the Japanese Hitomi (ASTRO-H) satellite. In the beam of this instrument, there was a filter wheel containing x-ray filters and active calibration sources. This paper describes this filter wheel. We show the purpose of the filters and the preflight calibrations performed. In addition, we present the calibration source design and measured performance. Finally, we conclude with prospects for future missions.

Development of and Clinical Experience with a Simple Device for Performing Intraoperative Fluorescein Fluorescence Cerebral Angiography: Technical Notes.

PubMed

Ichikawa, Tsuyoshi; Suzuki, Kyouichi; Watanabe, Yoichi; Sato, Taku; Sakuma, Jun; Saito, Kiyoshi

2016-01-01

To perform intraoperative fluorescence angiography (FAG) under a microscope without an integrated FAG function with reasonable cost and sufficient quality for evaluation, we made a small and easy to use device for fluorescein FAG (FAG filter). We investigated the practical use of this FAG filter during aneurysm surgery, revascularization surgery, and brain tumor surgery. The FAG filter consists of two types of filters: an excitatory filter and a barrier filter. The excitatory filter excludes all wavelengths except for blue light and the barrier filter passes long waves except for blue light. By adding this FAG filter to a microscope without an integrated FAG function, light from the microscope illuminating the surgical field becomes blue, which is blocked by the barrier filter. We put the FAG filter on the objective lens of the operating microscope correctly and fluorescein sodium was injected intravenously or intra-arterially. Fluorescence (green light) from vessels in the surgical field and the dyed tumor were clearly observed through the microscope and recorded by a memory device. This method was easy and could be performed in a short time (about 10 seconds). Blood flow of small vessels deep in the surgical field could be observed. Blood flow stagnation could be evaluated. However, images from this method were inferior to those obtained by currently commercially available microscopes with an integrated FAG function. In brain tumor surgery, a stained tumor on the brain surface could be observed using this method. FAG could be performed with a microscope without an integrated FAG function easily with only this FAG filter.

High-performance information search filters for acute kidney injury content in PubMed, Ovid Medline and Embase.

PubMed

Hildebrand, Ainslie M; Iansavichus, Arthur V; Haynes, R Brian; Wilczynski, Nancy L; Mehta, Ravindra L; Parikh, Chirag R; Garg, Amit X

2014-04-01

We frequently fail to identify articles relevant to the subject of acute kidney injury (AKI) when searching the large bibliographic databases such as PubMed, Ovid Medline or Embase. To address this issue, we used computer automation to create information search filters to better identify articles relevant to AKI in these databases. We first manually reviewed a sample of 22 992 full-text articles and used prespecified criteria to determine whether each article contained AKI content or not. In the development phase (two-thirds of the sample), we developed and tested the performance of >1.3-million unique filters. Filters with high sensitivity and high specificity for the identification of AKI articles were then retested in the validation phase (remaining third of the sample). We succeeded in developing and validating high-performance AKI search filters for each bibliographic database with sensitivities and specificities in excess of 90%. Filters optimized for sensitivity reached at least 97.2% sensitivity, and filters optimized for specificity reached at least 99.5% specificity. The filters were complex; for example one PubMed filter included >140 terms used in combination, including 'acute kidney injury', 'tubular necrosis', 'azotemia' and 'ischemic injury'. In proof-of-concept searches, physicians found more articles relevant to topics in AKI with the use of the filters. PubMed, Ovid Medline and Embase can be filtered for articles relevant to AKI in a reliable manner. These high-performance information filters are now available online and can be used to better identify AKI content in large bibliographic databases.

Development of and Clinical Experience with a Simple Device for Performing Intraoperative Fluorescein Fluorescence Cerebral Angiography: Technical Notes

PubMed Central

ICHIKAWA, Tsuyoshi; SUZUKI, Kyouichi; WATANABE, Yoichi; SATO, Taku; SAKUMA, Jun; SAITO, Kiyoshi

2016-01-01

To perform intraoperative fluorescence angiography (FAG) under a microscope without an integrated FAG function with reasonable cost and sufficient quality for evaluation, we made a small and easy to use device for fluorescein FAG (FAG filter). We investigated the practical use of this FAG filter during aneurysm surgery, revascularization surgery, and brain tumor surgery. The FAG filter consists of two types of filters: an excitatory filter and a barrier filter. The excitatory filter excludes all wavelengths except for blue light and the barrier filter passes long waves except for blue light. By adding this FAG filter to a microscope without an integrated FAG function, light from the microscope illuminating the surgical field becomes blue, which is blocked by the barrier filter. We put the FAG filter on the objective lens of the operating microscope correctly and fluorescein sodium was injected intravenously or intra-arterially. Fluorescence (green light) from vessels in the surgical field and the dyed tumor were clearly observed through the microscope and recorded by a memory device. This method was easy and could be performed in a short time (about 10 seconds). Blood flow of small vessels deep in the surgical field could be observed. Blood flow stagnation could be evaluated. However, images from this method were inferior to those obtained by currently commercially available microscopes with an integrated FAG function. In brain tumor surgery, a stained tumor on the brain surface could be observed using this method. FAG could be performed with a microscope without an integrated FAG function easily with only this FAG filter. PMID:26597335

Developing topic-specific search filters for PubMed with click-through data.

PubMed

Li, J; Lu, Z

2013-01-01

Search filters have been developed and demonstrated for better information access to the immense and ever-growing body of publications in the biomedical domain. However, to date the number of filters remains quite limited because the current filter development methods require significant human efforts in manual document review and filter term selection. In this regard, we aim to investigate automatic methods for generating search filters. We present an automated method to develop topic-specific filters on the basis of users' search logs in PubMed. Specifically, for a given topic, we first detect its relevant user queries and then include their corresponding clicked articles to serve as the topic-relevant document set accordingly. Next, we statistically identify informative terms that best represent the topic-relevant document set using a background set composed of topic irrelevant articles. Lastly, the selected representative terms are combined with Boolean operators and evaluated on benchmark datasets to derive the final filter with the best performance. We applied our method to develop filters for four clinical topics: nephrology, diabetes, pregnancy, and depression. For the nephrology filter, our method obtained performance comparable to the state of the art (sensitivity of 91.3%, specificity of 98.7%, precision of 94.6%, and accuracy of 97.2%). Similarly, high-performing results (over 90% in all measures) were obtained for the other three search filters. Based on PubMed click-through data, we successfully developed a high-performance method for generating topic-specific search filters that is significantly more efficient than existing manual methods. All data sets (topic-relevant and irrelevant document sets) used in this study and a demonstration system are publicly available at http://www.ncbi.nlm.nih.gov/CBBresearch/Lu/downloads/CQ_filter/

Developing Topic-Specific Search Filters for PubMed with Click-Through Data

PubMed Central

Li, Jiao; Lu, Zhiyong

2013-01-01

Summary Objectives Search filters have been developed and demonstrated for better information access to the immense and ever-growing body of publications in the biomedical domain. However, to date the number of filters remains quite limited because the current filter development methods require significant human efforts in manual document review and filter term selection. In this regard, we aim to investigate automatic methods for generating search filters. Methods We present an automated method to develop topic-specific filters on the basis of users’ search logs in PubMed. Specifically, for a given topic, we first detect its relevant user queries and then include their corresponding clicked articles to serve as the topic-relevant document set accordingly. Next, we statistically identify informative terms that best represent the topic-relevant document set using a background set composed of topic irrelevant articles. Lastly, the selected representative terms are combined with Boolean operators and evaluated on benchmark datasets to derive the final filter with the best performance. Results We applied our method to develop filters for four clinical topics: nephrology, diabetes, pregnancy, and depression. For the nephrology filter, our method obtained performance comparable to the state of the art (sensitivity of 91.3%, specificity of 98.7%, precision of 94.6%, and accuracy of 97.2%). Similarly, high-performing results (over 90% in all measures) were obtained for the other three search filters. Conclusion Based on PubMed click-through data, we successfully developed a high-performance method for generating topic-specific search filters that is significantly more efficient than existing manual methods. All data sets (topic-relevant and irrelevant document sets) used in this study and a demonstration system are publicly available at http://www.ncbi.nlm.nih.gov/CBBresearch/Lu/downloads/CQ_filter/ PMID:23666447

Preemie Milestones

MedlinePlus

... were born early.​ How to Adjust Your Baby's Age If your baby was born early, she has 2 important days to mark on ... Development Milestones Matter: 10 to Watch for by Age 5 Motor Delays: Early Identification and Evaluation (AAP Clinical Report)​ Article Body ...

Collaborative Negotiations: A Successful Approach for Negotiation Compliance Milestones for the transition of the PFP Hanford Nuclear Reservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

HOPKINS, A.M.

The new approach to negotiations was termed collaborative (win-win) rather than positional (win-lose). Collaborative negotiations were conducted to establish milestones for the decommissioning of the Plutonium Finishing Plant, PFP.

47 CFR 25.164 - Milestones.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Milestones. (a) Licensees of geostationary orbit satellite systems other than DBS and DARS satellite systems.... (b) Licensees of non-geostationary orbit satellite systems other than DBS and DARS satellite systems... both non-geostationary orbit satellites and geostationary orbit satellites, other than DBS and DARS...

47 CFR 25.164 - Milestones.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Milestones. (a) Licensees of geostationary orbit satellite systems other than DBS and DARS satellite systems.... (b) Licensees of non-geostationary orbit satellite systems other than DBS and DARS satellite systems... both non-geostationary orbit satellites and geostationary orbit satellites, other than DBS and DARS...

47 CFR 25.164 - Milestones.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Milestones. (a) Licensees of geostationary orbit satellite systems other than DBS and DARS satellite systems.... (b) Licensees of non-geostationary orbit satellite systems other than DBS and DARS satellite systems... both non-geostationary orbit satellites and geostationary orbit satellites, other than DBS and DARS...

47 CFR 25.164 - Milestones.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Milestones. (a) Licensees of geostationary orbit satellite systems other than DBS and DARS satellite systems.... (b) Licensees of non-geostationary orbit satellite systems other than DBS and DARS satellite systems... both non-geostationary orbit satellites and geostationary orbit satellites, other than DBS and DARS...

HybridICE® filter: ice separation in freeze desalination of mine waste waters.

PubMed

Adeniyi, A; Maree, J P; Mbaya, R K K; Popoola, A P I; Mtombeni, T; Zvinowanda, C M

2014-01-01

Freeze desalination is an alternative method for the treatment of mine waste waters. HybridICE(®) technology is a freeze desalination process which generates ice slurry in surface scraper heat exchangers that use R404a as the primary refrigerant. Ice separation from the slurry takes place in the HybridICE filter, a cylindrical unit with a centrally mounted filter element. Principally, the filter module achieves separation of the ice through buoyancy force in a continuous process. The HybridICE filter is a new and economical means of separating ice from the slurry and requires no washing of ice with water. The performance of the filter at a flow-rate of 25 L/min was evaluated over time and with varied evaporating temperature of the refrigerant. Behaviours of the ice fraction and residence time were also investigated. The objective was to find ways to improve the performance of the filter. Results showed that filter performance can be improved by controlling the refrigerant evaporating temperature and eliminating overflow.

Campaign 2 Level 2 Milestone Review 2009: Milestone # 3131 Grain Scale Simulation of Pore Collapse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwartz, A J

2009-09-28

The milestone reviewed on Sept. 16, 2009 was 'High-fidelity simulation of shock initiation of high explosives at the grain scale using coupled hydrodynamics, thermal transport and chemistry'. It is the opinion of the committee that the team has satisfied the milestone. A detailed description of how the goals were met is provided. The milestone leveraged capabilities from ASC Physics and Engineering Materials program combined with experimental input from Campaign 2. A combined experimental-multiscale simulation approach was used to create and validate the various TATB model components. At the lowest length scale, quantum chemical calculations were used to determine equations ofmore » state, thermal transport properties and reaction rates for TATB as it is decomposing. High-pressure experiments conducted in diamond anvil cells, gas guns and the Z machine were used to validate the EOS, thermal conductivity, specific heat and predictions of water formation. The predicted reaction networks and chemical kinetic equations were implemented in Cheetah and validated against the lower length scale data. Cheetah was then used within the ASC code ALE3D for high-resolution, thermo-mechanically coupled simulations of pore collapse at the micron size scale to predict conditions for detonation initiation.« less

Space Solar Power Satellite Systems, Modern Small Satellites, and Space Rectenna

NASA Astrophysics Data System (ADS)

Bergsrud, Corey Alexis Marvin

Space solar power satellite (SSPS) systems is the concept of placing large satellite into geostationary Earth orbit (GEO) to harvest and convert massive amounts of solar energy into microwave energy, and to transmit the microwaves to a rectifying antenna (rectenna) array on Earth. The rectenna array captures and converts the microwave power into usable power that is injected into the terrestrial electric grid for use. This work approached the microwave power beam as an additional source of power (with solar) for lower orbiting satellites. Assuming the concept of retrodirectivity, a GEO-SSPS antenna array system tracks and delivers microwave power to lower orbiting satellites. The lower orbiting satellites are equipped with a stacked photovoltaic (PV)/rectenna array hybrid power generation unit (HPGU) in order to harvest solar and/or microwave energy for on-board use during orbit. The area, and mass of the PV array part of the HPGU was reduced at about 32% beginning-of-life power in order to achieve the spacecraft power requirements. The HPGU proved to offer a mass decrease in the PGU, and an increase in mission life due to longer living component life of the rectenna array. Moreover, greater mission flexibility is achieved through a track and power delivery concept. To validate the potential advantages offered by a HPGU, a mission concept was presented that utilizes modern small satellites as technology demonstrators. During launch, a smaller power receiving "daughter" satellite sits inside a larger power transmitting "mother" satellite. Once separated from the launch vehicle the daughter satellite is ejected away from the mother satellite, and each satellite deploys its respective power transmitting or power receiving hardware's for experimentation. The concept of close proximity mission operations between the satellites is considered. To validate the technology of the space rectenna array part of the HPGU, six milestones were completed in the design. The first milestone considers thermal analysis for antennas, and the second milestone compares commercial off-the-shelve high frequency substrates for thermal, and outgassing characteristics. Since the design of the rectenna system is centralized around the diode component, a diode analysis was conducted for the third milestone. Next, to efficiently transfer power between the different parts of the rectenna system a coplanar stripline was consider for the fourth milestone. The fifth milestone is a balanced-to-unbalanced transition structure that is needed to properly feed and measure different systems of the rectenna. The last milestone proposes laboratory measurement setups. Each of these milestones is a separate research question that is answered in this dissertation. The results of these rectenna milestones can be integrated into a HPGU.

Sequential Blood Filtration for Extracorporeal Circulation: Initial Results from a Proof-of-Concept Prototype.

PubMed

Herbst, Daniel P

2014-09-01

Micropore filters are used during extracorporeal circulation to prevent gaseous and solid particles from entering the patient's systemic circulation. Although these devices improve patient safety, limitations in current designs have prompted the development of a new concept in micropore filtration. A prototype of the new design was made using 40-μm filter screens and compared against four commercially available filters for performance in pressure loss and gross air handling. Pre- and postfilter bubble counts for 5- and 10-mL bolus injections in an ex vivo test circuit were recorded using a Doppler ultrasound bubble counter. Statistical analysis of results for bubble volume reduction between test filters was performed with one-way repeated-measures analysis of variance using Bonferroni post hoc tests. Changes in filter performance with changes in microbubble load were also assessed with dependent t tests using the 5- and 10-mL bolus injections as the paired sample for each filter. Significance was set at p < .05. All filters in the test group were comparable in pressure loss performance, showing a range of 26-33 mmHg at a flow rate of 6 L/min. In gross air-handling studies, the prototype showed improved bubble volume reduction, reaching statistical significance with three of the four commercial filters. All test filters showed decreased performance in bubble volume reduction when the microbubble load was increased. Findings from this research support the underpinning theories of a sequential arterial-line filter design and suggest that improvements in microbubble filtration may be possible using this technique.

Sequential Blood Filtration for Extracorporeal Circulation: Initial Results from a Proof-of-Concept Prototype

PubMed Central

Herbst, Daniel P.

2014-01-01

Abstract: Micropore filters are used during extracorporeal circulation to prevent gaseous and solid particles from entering the patient’s systemic circulation. Although these devices improve patient safety, limitations in current designs have prompted the development of a new concept in micropore filtration. A prototype of the new design was made using 40-μm filter screens and compared against four commercially available filters for performance in pressure loss and gross air handling. Pre- and postfilter bubble counts for 5- and 10-mL bolus injections in an ex vivo test circuit were recorded using a Doppler ultrasound bubble counter. Statistical analysis of results for bubble volume reduction between test filters was performed with one-way repeated-measures analysis of variance using Bonferroni post hoc tests. Changes in filter performance with changes in microbubble load were also assessed with dependent t tests using the 5- and 10-mL bolus injections as the paired sample for each filter. Significance was set at p < .05. All filters in the test group were comparable in pressure loss performance, showing a range of 26–33 mmHg at a flow rate of 6 L/min. In gross air-handling studies, the prototype showed improved bubble volume reduction, reaching statistical significance with three of the four commercial filters. All test filters showed decreased performance in bubble volume reduction when the microbubble load was increased. Findings from this research support the underpinning theories of a sequential arterial-line filter design and suggest that improvements in microbubble filtration may be possible using this technique. PMID:26357790

An ultrasensitive bio-surrogate for nanoporous filter membrane performance metrology directed towards contamination control in microlithography applications

NASA Astrophysics Data System (ADS)

Ahmad, Farhan; Mish, Barbara; Qiu, Jian; Singh, Amarnauth; Varanasi, Rao; Bedford, Eilidh; Smith, Martin

2016-03-01

Contamination tolerances in semiconductor manufacturing processes have changed dramatically in the past two decades, reaching below 20 nm according to the guidelines of the International Technology Roadmap for Semiconductors. The move to narrower line widths drives the need for innovative filtration technologies that can achieve higher particle/contaminant removal performance resulting in cleaner process fluids. Nanoporous filter membrane metrology tools that have been the workhorse over the past decade are also now reaching limits. For example, nanoparticle (NP) challenge testing is commonly applied for assessing particle retention performance of filter membranes. Factors such as high NP size dispersity, low NP detection sensitivity, and high NP particle-filter affinity impose challenges in characterizing the next generation of nanoporous filter membranes. We report a novel bio-surrogate, 5 nm DNA-dendrimer conjugate for evaluating particle retention performance of nanoporous filter membranes. A technique capable of single molecule detection is employed to detect sparse concentration of conjugate in filter permeate, providing >1000- fold higher detection sensitivity than any existing 5 nm-sized particle enumeration technique. This bio-surrogate also offers narrow size distribution, high stability and chemical tunability. This bio-surrogate can discriminate various sub-15 nm pore-rated nanoporous filter membranes based on their particle retention performance. Due to high bio-surrogate detection sensitivity, a lower challenge concentration of bio-surrogate (as compared to other NPs of this size) can be used for filter testing, providing a better representation of customer applications. This new method should provide better understanding of the next generation filter membranes for removing defect-causing contaminants from lithography processes.

Initial Ares I Bending Filter Design

NASA Technical Reports Server (NTRS)

Jang, Jiann-Woei; Bedrossian, Nazareth; Hall, Robert; Norris, H. Lee; Hall, Charles; Jackson, Mark

2007-01-01

The Ares-I launch vehicle represents a challenging flex-body structural environment for control system design. Software filtering of the inertial sensor output will be required to ensure control system stability and adequate performance. This paper presents a design methodology employing numerical optimization to develop the Ares-I bending filters. The filter design methodology was based on a numerical constrained optimization approach to maximize stability margins while meeting performance requirements. The resulting bending filter designs achieved stability by adding lag to the first structural frequency and hence phase stabilizing the first Ares-I flex mode. To minimize rigid body performance impacts, a priority was placed via constraints in the optimization algorithm to minimize bandwidth decrease with the addition of the bending filters. The bending filters provided here have been demonstrated to provide a stable first stage control system in both the frequency domain and the MSFC MAVERIC time domain simulation.

High-performance analysis of filtered semantic graphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buluc, Aydin; Fox, Armando; Gilbert, John R.

2012-01-01

High performance is a crucial consideration when executing a complex analytic query on a massive semantic graph. In a semantic graph, vertices and edges carry "attributes" of various types. Analytic queries on semantic graphs typically depend on the values of these attributes; thus, the computation must either view the graph through a filter that passes only those individual vertices and edges of interest, or else must first materialize a subgraph or subgraphs consisting of only the vertices and edges of interest. The filtered approach is superior due to its generality, ease of use, and memory efficiency, but may carry amore » performance cost. In the Knowledge Discovery Toolbox (KDT), a Python library for parallel graph computations, the user writes filters in a high-level language, but those filters result in relatively low performance due to the bottleneck of having to call into the Python interpreter for each edge. In this work, we use the Selective Embedded JIT Specialization (SEJITS) approach to automatically translate filters defined by programmers into a lower-level efficiency language, bypassing the upcall into Python. We evaluate our approach by comparing it with the high-performance C++ /MPI Combinatorial BLAS engine, and show that the productivity gained by using a high-level filtering language comes without sacrificing performance.« less

A robust spatial filtering technique for multisource localization and geoacoustic inversion.

PubMed

Stotts, S A

2005-07-01

Geoacoustic inversion and source localization using beamformed data from a ship of opportunity has been demonstrated with a bottom-mounted array. An alternative approach, which lies within a class referred to as spatial filtering, transforms element level data into beam data, applies a bearing filter, and transforms back to element level data prior to performing inversions. Automation of this filtering approach is facilitated for broadband applications by restricting the inverse transform to the degrees of freedom of the array, i.e., the effective number of elements, for frequencies near or below the design frequency. A procedure is described for nonuniformly spaced elements that guarantees filter stability well above the design frequency. Monitoring energy conservation with respect to filter output confirms filter stability. Filter performance with both uniformly spaced and nonuniformly spaced array elements is discussed. Vertical (range and depth) and horizontal (range and bearing) ambiguity surfaces are constructed to examine filter performance. Examples that demonstrate this filtering technique with both synthetic data and real data are presented along with comparisons to inversion results using beamformed data. Examinations of cost functions calculated within a simulated annealing algorithm reveal the efficacy of the approach.

Integrating the ECG power-line interference removal methods with rule-based system.

PubMed

Kumaravel, N; Senthil, A; Sridhar, K S; Nithiyanandam, N

1995-01-01

The power-line frequency interference in electrocardiographic signals is eliminated to enhance the signal characteristics for diagnosis. The power-line frequency normally varies +/- 1.5 Hz from its standard value of 50 Hz. In the present work, the performances of the linear FIR filter, Wave digital filter (WDF) and adaptive filter for the power-line frequency variations from 48.5 to 51.5 Hz in steps of 0.5 Hz are studied. The advantage of the LMS adaptive filter in the removal of power-line frequency interference even if the frequency of interference varies by +/- 1.5 Hz from its normal value of 50 Hz over other fixed frequency filters is very well justified. A novel method of integrating rule-based system approach with linear FIR filter and also with Wave digital filter are proposed. The performances of Rule-based FIR filter and Rule-based Wave digital filter are compared with the LMS adaptive filter.

Microbiological Characterization of the International Space Station Water Processor Assembly External Filter Assembly S/N 01

NASA Technical Reports Server (NTRS)

Weir, Natalee; Wilson, Mark; Yoets, Airan; Yoets, Airan; Molina, Thomas; Bruce, Rebekah; Sitler, Glenn; Carter, Layne

2012-01-01

The External Filter Assembly (EFA) S/N 01 is a mesh screen filter with a pore size of approximately 300 micron that was installed in the International Space Station (ISS) Water Processor Assembly (WPA) between the Waste Tank and the Mostly Liquid Separator (MLS) on February 11, 2010 to protect clearances in the MLS solenoid valve SV_1121_3. A removal & replacement of the EFA Filter was performed on March 22, 2011 in response to increasing pressure across the Waste Tank solenoid valve SV_1121_1 and the EFA Filter. The EFA Filter was returned on ULF6 and received in the Boeing Huntsville Laboratory on June 13, 2011. The filter was aseptically removed from the housing, and the residual water was collected for enumeration and identification of bacteria and fungi. Swab samples of the filter surface were also collected for microbiological enumeration and identification. Sample analyses were performed by Boeing Huntsville Laboratory and NASA Johnson Space Center Microbiology for comparison. Photographic documentation of the EFA filter was performed using a stereo microscope and environmental scanning electron microscope. This paper characterizes the amount and types of microorganisms on the filter surface and in the residual water from the filter housing following 1 year of utilization in the ISS WPA.

43 CFR 3930.30 - Diligent development milestones.

Code of Federal Regulations, 2013 CFR

2013-10-01

... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MANAGEMENT OF OIL SHALE EXPLORATION AND LEASES Management of Oil Shale Exploration Licenses and Leases § 3930.30 Diligent development milestones. (a) Operators must diligently develop the oil shale resources consistent with the terms and...

43 CFR 3930.30 - Diligent development milestones.

Code of Federal Regulations, 2012 CFR

2012-10-01

... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MANAGEMENT OF OIL SHALE EXPLORATION AND LEASES Management of Oil Shale Exploration Licenses and Leases § 3930.30 Diligent development milestones. (a) Operators must diligently develop the oil shale resources consistent with the terms and...

43 CFR 3930.30 - Diligent development milestones.

Code of Federal Regulations, 2014 CFR

2014-10-01

... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MANAGEMENT OF OIL SHALE EXPLORATION AND LEASES Management of Oil Shale Exploration Licenses and Leases § 3930.30 Diligent development milestones. (a) Operators must diligently develop the oil shale resources consistent with the terms and...

20 CFR 411.581 - Can an EN receive milestone and outcome payments for months after a beneficiary takes his or her...

Code of Federal Regulations, 2014 CFR

2014-04-01

... Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.581 Can an EN receive milestone and outcome payments for months...

20 CFR 411.580 - Can an EN receive payments for milestones or outcome payment months that occur before the...

Code of Federal Regulations, 2012 CFR

2012-04-01

....580 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.580 Can an EN receive payments for milestones or outcome payment...

20 CFR 411.580 - Can an EN receive payments for milestones or outcome payment months that occur before the...

Code of Federal Regulations, 2014 CFR

2014-04-01

....580 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.580 Can an EN receive payments for milestones or outcome payment...

20 CFR 411.580 - Can an EN receive payments for milestones or outcome payment months that occur before the...

Code of Federal Regulations, 2013 CFR

2013-04-01

....580 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.580 Can an EN receive payments for milestones or outcome payment...

20 CFR 411.581 - Can an EN receive milestone and outcome payments for months after a beneficiary takes his or her...

Code of Federal Regulations, 2012 CFR

2012-04-01

... Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.581 Can an EN receive milestone and outcome payments for months...

20 CFR 411.581 - Can an EN receive milestone and outcome payments for months after a beneficiary takes his or her...

Code of Federal Regulations, 2013 CFR

2013-04-01

... Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.581 Can an EN receive milestone and outcome payments for months...

14 CFR 1274.908 - Milestone payments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Milestone payments. 1274.908 Section 1274.908 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION COOPERATIVE AGREEMENTS WITH...) Taxpayer identification number (TIN). (x) While not required, the recipient is strongly encouraged to...

Application of analytical redundancy management to Shuttle crafts. [computerized simulation of microelectronic implementation

NASA Technical Reports Server (NTRS)

Montgomery, R. C.; Tabak, D.

1979-01-01

The study involves the bank of filters approach to analytical redundancy management since this is amenable to microelectronic implementation. Attention is given to a study of the UD factorized filter to determine if it gives more accurate estimates than the standard Kalman filter when data processing word size is reduced. It is reported that, as the word size is reduced, the effect of modeling error dominates the filter performance of the two filters. However, the UD filter is shown to maintain a slight advantage in tracking performance. It is concluded that because of the UD filter's stability in the serial processing mode, it remains the leading candidate for microelectronic implementation.

Noise modeling and analysis of an IMU-based attitude sensor: improvement of performance by filtering and sensor fusion

NASA Astrophysics Data System (ADS)

K., Nirmal; A. G., Sreejith; Mathew, Joice; Sarpotdar, Mayuresh; Suresh, Ambily; Prakash, Ajin; Safonova, Margarita; Murthy, Jayant

2016-07-01

We describe the characterization and removal of noises present in the Inertial Measurement Unit (IMU) MPU- 6050, which was initially used in an attitude sensor, and later used in the development of a pointing system for small balloon-borne astronomical payloads. We found that the performance of the IMU degraded with time because of the accumulation of different errors. Using Allan variance analysis method, we identified the different components of noise present in the IMU, and verified the results by the power spectral density analysis (PSD). We tried to remove the high-frequency noise using smooth filters such as moving average filter and then Savitzky Golay (SG) filter. Even though we managed to filter some high-frequency noise, these filters performance wasn't satisfactory for our application. We found the distribution of the random noise present in IMU using probability density analysis and identified that the noise in our IMU was white Gaussian in nature. Hence, we used a Kalman filter to remove the noise and which gave us good performance real time.

Enhanced performance of a filter-sensor system.

PubMed

Sasaki, Isao; Josowicz, Mira; Janata, Jirí; Glezer, Ari

2006-06-01

In this paper are addressed two important, but seemingly unrelated issues: long term performance of a gas sensing array and performance of an air purification unit. It is shown that when considered together, the system can be regarded as a "smart filter". The enhancement is achieved by periodic differential sampling and measurement of the "upstream" and "downstream" gases of a filter. The correctly functioning filter supplies the "zero gas" from the downstream for the continuous sensor baseline correction. A key element in this scheme is the synthetic jet that delivers well-defined pulses of the two gases. The deterioration of the performance of the "smart filter" can be diagnosed from the response pattern of the sensor. The approach has been demonstrated on removal/sensing of ammonia gas from air.

Age of Achievement of Gross Motor Milestones in Infancy and Adiposity at Age 3 Years

PubMed Central

Neelon, Sara E. Benjamin; Oken, Emily; Taveras, Elsie M.; Rifas-Shiman, Sheryl L.; Gillman, Matthew W.

2011-01-01

Early life physical activity may help prevent obesity but is difficult to measure. The purpose of this study was to examine associations of age of achievement of gross motor milestones in infancy with adiposity at age 3 years. Seven forty one mother/infant dyads participated in a longitudinal study in Massachusetts. Exposures were age of attainment of 4 gross motor milestones—rolling over, sitting up, crawling, and walking. Outcomes were 3-year sum of subscapular and triceps skinfold thickness (SS + TR) for overall adiposity, their ratio (SS:TR) for central adiposity, and body mass index (BMI) z-score. We used linear regression models adjusted for confounders to examine motor milestone achievement and later adiposity. Rolling over (0.04, 95% CI: 0.008, 0.07) and sitting up (0.02, 95% CI: 0.001, 0.05) at ≥6 months were associated with increased SS:TR compared with attainment before 6 months. Walking at ≥15 months was associated with 0.98 mm higher SS + TR (95% CI: 0.05, 1.91) compared with walking before 12 months. Age at crawling was not associated with the outcomes. None of the milestones were associated with BMI z-score. Age of motor milestone achievement was only a modest predictor of adiposity. Later rolling over and sitting up were associated with greater central adiposity, and later age at walking was associated with greater overall adiposity at age 3 years. Although we controlled for birth weight and 6-month weight-for-length in our models, more detailed assessment of early adiposity prior to achievement of motor milestones is needed to help determine causality. PMID:21643834

Timing of motor milestones achievement and development of overweight in childhood: a study within the Danish National Birth Cohort.

PubMed

Schmidt Morgen, C; Andersen, A M N; Due, P; Neelon, S B; Gamborg, M; Sørensen, T I A

2014-08-01

Overweight may hinder achievement of gross motor milestones and delayed achievement of milestones may increase the risk of later overweight for reasons involving physical activity and the building of lean body mass. To investigate whether increased birth weight and body mass index (BMI) at 5 months is associated with the achievement of the ability to sit up and walk and whether delayed achievement of these milestones is associated with overweight at age 7 years. We used data from the Danish National Birth Cohort on 25,148 children born between 1998 and 2003. Follow-up took place from 2003 to 2010. Mean age at follow-up was 7.04 years. We used logistic and linear regression analyses. Birth weight and BMI at 5 months were marginally associated with earlier achievement of the ability to sit up and walk (regression coefficients between -0.027 months; [CI -0.042; -0.013] and -0.092 months [CI -0.118; -0.066]). Age in months of sitting and walking were not associated with overweight at age 7 years (ORs between 0.97 [CI 0.95-1.00] and 1.00 [CI 0.96-1.04]). Later achievement of sitting and walking predicted lower BMI at age 7 years (ln-BMI -z-scores between -0.023 [CI -0.029; -0.017] and -0.005 [CI -0.015; 0.005)). All observed associations were of negligible magnitude and we conclude that birth weight or BMI at age 5 months and motor milestones appear largely independent of each other and that timing of achievement of motor milestones seems not to be associated with later overweight or increased BMI. © 2013 The Authors. Pediatric Obesity © 2013 International Association for the Study of Obesity.

Fine motor and self-care milestones for individuals with Down syndrome using a Retrospective Chart Review.

PubMed

Frank, K; Esbensen, A J

2015-08-01

Developmental milestone markers for fine motor and self-care skills among children with Down syndrome (DS) are either minimal, anecdotal or out-of date. Our goal was to produce normative expectations for the development of fine motor and self-care milestones specific to children with DS. A cross-sectional retrospective chart review was completed on 274 children with DS seen at a specialty clinic that ranged in age from 4 months to 18 years. Specific skills were assessed at occupational therapy assessments as either present or absent, including fine motor, handwriting, scissor usage, self-feeding and clothing management. Fine motor milestones describing when 10-30% ('early achievers') and 75-95% ('representative achievement') of children with DS had mastered each skill were developed based upon descriptive review. As the fine motor and self-care skills advanced in complexity, the range of ages for documented skill acquisition was observed to increase. Age ranges for the mastery of fine motor developmental milestones for early and representative achievement were developed based upon descriptive analysis of cross-sectional retrospective clinical chart reviews. That the age range for mastering fine motor and self-care skills broadens as children with DS get older is in agreement with what is identified in the DS behavioural phenotype with regard to variable motor skills overall. These fine motor and self-care developmental milestone markers contribute to the field by informing parents, caregivers and healthcare providers of potential fine motor and self-care outcomes and describing normative development for children with DS. © 2014 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Computing Rates of Small Molecule Diffusion Through Protein Channels Using Markovian Milestoning

NASA Astrophysics Data System (ADS)

Abrams, Cameron

2014-03-01

Measuring diffusion rates of ligands plays a key role in understanding the kinetic processes inside proteins. For example, although many molecular simulation studies have reported free energy barriers to infer rates for CO diffusion in myoglobin (Mb), they typically do not include direct calculation of diffusion rates because of the long simulation times needed to infer these rates with statistical accuracy. We show in this talk how to apply Markovian milestoning along minimum free-energy pathways to calculate diffusion rates of CO inside Mb. In Markovian milestoning, one partitions a suitable reaction coordinate space into regions and performs restrained molecular dynamics in each region to accumulate kinetic statistics that, when assembled across regions, provides an estimate of the mean first-passage time between states. The mean escape time for CO directly from the so-called distal pocket (DP) through the histidine gate (HG) is estimated at about 24 ns, confirming the importance of this portal for CO. But Mb is known to contain several internal cavities, and cavity-to-cavity diffusion rates are also computed and used to build a complete kinetic network as a Markov state model. Within this framework, the effective mean time of escape to the solvent through HG increases to 30 ns. Our results suggest that carrier protein structure may have evolved under pressure to modulate dissolved gas release rates using a network of ligand-accessible cavities. Support: NIH R01GM100472.

Pharmacy students' test-taking motivation-effort on a low-stakes standardized test.

PubMed

Waskiewicz, Rhonda A

2011-04-11

To measure third-year pharmacy students' level of motivation while completing the Pharmacy Curriculum Outcomes Assessment (PCOA) administered as a low-stakes test to better understand use of the PCOA as a measure of student content knowledge. Student motivation was manipulated through an incentive (ie, personal letter from the dean) and a process of statistical motivation filtering. Data were analyzed to determine any differences between the experimental and control groups in PCOA test performance, motivation to perform well, and test performance after filtering for low motivation-effort. Incentivizing students diminished the need for filtering PCOA scores for low effort. Where filtering was used, performance scores improved, providing a more realistic measure of aggregate student performance. To ensure that PCOA scores are an accurate reflection of student knowledge, incentivizing and/or filtering for low motivation-effort among pharmacy students should be considered fundamental best practice when the PCOA is administered as a low-stakes test.

Outcomes and Direct Costs of Inferior Vena Cava Filter Placement and Retrieval within the IR and Surgical Settings.

PubMed

Makary, Mina S; Kapke, Jordan; Yildiz, Vedat; Pan, Xueliang; Dowell, Joshua D

2018-02-01

To compare the outcomes and costs of inferior vena cava (IVC) filter placement and retrieval in the interventional radiology (IR) and surgical departments at a tertiary-care center. Retrospective review was performed of 142 sequential outpatient IVC filter placements and 244 retrievals performed in the IR suite and operating room (OR) from 2013 to 2016. Patient demographic data, procedural characteristics, outcomes, and direct costs were compared between cohorts. Technical success rates of 100% were achieved for both IR and OR filter placements, and 98% of filters were successfully retrieved by IR means, compared with 83% in the OR (P < .01). Fluoroscopy time was similar for IR and OR filter insertions, but IR retrievals required half the fluoroscopy time, with an average of 9 minutes vs 18 minutes in the OR (P = .02). There was no significant difference between cohorts in the incidences of complications for filter retrievals, but more postprocedural complications were observed for OR placements (8%) vs IR placements (1%; P = .05). The most severe complication occurred during an OR filter retrieval, resulting in entanglement of the snare device and conversion to an emergent open filter removal by vascular surgery. Direct costs were approximately 20% higher for OR vs IR IVC filter placements ($2,246 vs $2,671; P = .01). Filter placements are equally successfully performed in IR and OR settings, but OR patients experienced significantly higher postprocedural complication rates and incurred higher costs. In contrast, higher technical success rates and shorter fluoroscopy times were observed for IR filter retrievals compared with those performed in the OR. Copyright © 2017 SIR. Published by Elsevier Inc. All rights reserved.

Performance of breathing filters under wet conditions: a laboratory evaluation.

PubMed

Turnbull, D; Fisher, P C; Mills, G H; Morgan-Hughes, N J

2005-05-01

Heat and moisture exchangers in combination with a bacterial and viral filter (HMEF) are widely used during general anaesthesia. Excess patient secretions occluding the HMEF have been responsible for previous case reports of airway obstruction. A previous study suggested that differences in HMEF design might contribute to filter obstruction under wet conditions. We tested 14 types of HMEF under wet conditions to establish which design features contributed to HMEF obstruction. Incremental amounts of saline were added to each filter. The pressure across the filter was measured with an air flow of 60 litre min(-1). We observed that saline added to the filter was often not easily visible to the casual observer. This concealment volume varied between filters. Ceramic hydrophobic pleated-membrane filters did not absorb saline and their resistance did not change. The composite filter where the moisture exchange component was either polyurethane foam or cellulose absorbed saline and contributed to a rise in resistance of 70-480% with the higher value more typical of the cellulose-paper-based HMEF. The ideal HMEF for use during general anaesthesia should prevent the passage of viral, bacterial and prion material, should provide this filtration performance even under wet conditions, should supplement humidification of the inspired air and anaesthetic gases and should not increase respiratory work. We have identified large variations in HMEF performance under wet conditions. Users should be aware of performance variation in HMEFs and use a filter suited to the intended application.

Value of ITS information for congestion avoidance in inter-modal transportation systems : phase II.

DOT National Transportation Integrated Search

2010-03-01

Our project has four major mile-stones for the second year: : Mile-stone #1: Develop Dynamic Inter-modal Transportation Optimization Models: For : mostly air-road network and inter-modal networks significant to OHIO : MICHIGAN regions and our col...

47 CFR 25.164 - Milestones.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Milestones. (a) Licensees of geostationary orbit satellite systems other than DBS and DARS satellite systems...) Licensees of non-geostationary orbit satellite systems other than DBS and DARS satellite systems licensed on... placed in the authorized orbital location or non-geostationary orbit(s) and that in-orbit operation of...

Filter methods to preserve local contrast and to avoid artifacts in gamut mapping

NASA Astrophysics Data System (ADS)

Meili, Marcel; Küpper, Dennis; Barańczuk, Zofia; Caluori, Ursina; Simon, Klaus

2010-01-01

Contrary to high dynamic range imaging, the preservation of details and the avoidance of artifacts is not explicitly considered in popular color management systems. An effective way to overcome these difficulties is image filtering. In this paper we investigate several image filter concepts for detail preservation as part of a practical gamut mapping strategy. In particular we define four concepts including various image filters and check their performance with a psycho-visual test. Additionally, we compare our performance evaluation to two image quality measures with emphasis on local contrast. Surprisingly, the most simple filter concept performs highly efficient and achieves an image quality which is comparable to the more established but slower methods.

Improved Kalman Filter Method for Measurement Noise Reduction in Multi Sensor RFID Systems

PubMed Central

Eom, Ki Hwan; Lee, Seung Joon; Kyung, Yeo Sun; Lee, Chang Won; Kim, Min Chul; Jung, Kyung Kwon

2011-01-01

Recently, the range of available Radio Frequency Identification (RFID) tags has been widened to include smart RFID tags which can monitor their varying surroundings. One of the most important factors for better performance of smart RFID system is accurate measurement from various sensors. In the multi-sensing environment, some noisy signals are obtained because of the changing surroundings. We propose in this paper an improved Kalman filter method to reduce noise and obtain correct data. Performance of Kalman filter is determined by a measurement and system noise covariance which are usually called the R and Q variables in the Kalman filter algorithm. Choosing a correct R and Q variable is one of the most important design factors for better performance of the Kalman filter. For this reason, we proposed an improved Kalman filter to advance an ability of noise reduction of the Kalman filter. The measurement noise covariance was only considered because the system architecture is simple and can be adjusted by the neural network. With this method, more accurate data can be obtained with smart RFID tags. In a simulation the proposed improved Kalman filter has 40.1%, 60.4% and 87.5% less Mean Squared Error (MSE) than the conventional Kalman filter method for a temperature sensor, humidity sensor and oxygen sensor, respectively. The performance of the proposed method was also verified with some experiments. PMID:22346641

Improved Kalman filter method for measurement noise reduction in multi sensor RFID systems.

PubMed

Eom, Ki Hwan; Lee, Seung Joon; Kyung, Yeo Sun; Lee, Chang Won; Kim, Min Chul; Jung, Kyung Kwon

2011-01-01

Recently, the range of available radio frequency identification (RFID) tags has been widened to include smart RFID tags which can monitor their varying surroundings. One of the most important factors for better performance of smart RFID system is accurate measurement from various sensors. In the multi-sensing environment, some noisy signals are obtained because of the changing surroundings. We propose in this paper an improved Kalman filter method to reduce noise and obtain correct data. Performance of Kalman filter is determined by a measurement and system noise covariance which are usually called the R and Q variables in the Kalman filter algorithm. Choosing a correct R and Q variable is one of the most important design factors for better performance of the Kalman filter. For this reason, we proposed an improved Kalman filter to advance an ability of noise reduction of the Kalman filter. The measurement noise covariance was only considered because the system architecture is simple and can be adjusted by the neural network. With this method, more accurate data can be obtained with smart RFID tags. In a simulation the proposed improved Kalman filter has 40.1%, 60.4% and 87.5% less mean squared error (MSE) than the conventional Kalman filter method for a temperature sensor, humidity sensor and oxygen sensor, respectively. The performance of the proposed method was also verified with some experiments.

Space station common module power system network topology and hardware development

NASA Technical Reports Server (NTRS)

Landis, D. M.

1985-01-01

Candidate power system newtork topologies for the space station common module are defined and developed and the necessary hardware for test and evaluation is provided. Martin Marietta's approach to performing the proposed program is presented. Performance of the tasks described will assure systematic development and evaluation of program results, and will provide the necessary management tools, visibility, and control techniques for performance assessment. The plan is submitted in accordance with the data requirements given and includes a comprehensive task logic flow diagram, time phased manpower requirements, a program milestone schedule, and detailed descriptions of each program task.

Creation and Evaluation of a Laboratory Administration Curriculum for Pathology Residents.

PubMed

Guarner, Jeannette; Hill, Charles E; Amukele, Timothy

2017-10-01

A clinical laboratory management (CLM) curriculum that can objectively assess the Accreditation Council for Graduate Medical Education pathology systems-based practice milestones and can provide consistent resident training across institutions is needed. Faculty at Emory University created a curriculum that consists of assay verification exercises and interactive, case-based online modules. Beta testing was done at Emory University and Johns Hopkins. Residents were required to obtain a score of more than 80% in the online modules to achieve levels 3 to 4 in the milestones. In addition, residents shadowed a laboratory director, performed an inspection of a laboratory section, and completed training in human subjects research and test utilization. Fourteen residents took and evaluated the laboratory administration curriculum. The printed certificates from the modules were used for objective faculty evaluation of mastery of concepts. Of all the activities the residents performed during the rotation, the online modules were ranked most helpful by all residents. A 25-question knowledge assessment was performed before and after the rotation and showed an average increase of 8 points (P = .0001). The multimodal CLM training described here is an easily adoptable, objective system for teaching CLM. It was well liked by residents and provided an objective measurement of mastery of concepts for faculty. © American Society for Clinical Pathology, 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

40 CFR 60.285a - Test methods and procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... performance test. (b) The owner or operator must determine compliance with the filterable particulate matter... used to determine the filterable particulate matter concentration. The sampling time and sample volume... repeat performance tests for filterable particulate matter at intervals no longer than 5 years following...

Kinetics of Supercritical Water Oxidation

DTIC Science & Technology

1995-12-31

milestone and Sandia Technical Report. A much-needed report describing in detail the operation of the Supercritical Fluids Reactor (SFR) was also...years. In addition, the literature research required to arrive at this optimal design will be used to improve the performance of the Supercritical Fluids ...the Supercritical Fluids Reactor (SFR)" (Sandia National Laboratories Report SAND-8203, Livermore, CA, 1995). R. R. Steeper, "Methane and Methanol

Effect of a Hypocretin/Orexin Antagonist on Neurocognitive Performance

DTIC Science & Technology

2010-09-01

Appendix 2), this milestone has been achieved as 26.05 g of >99% pure almorexant was delivered by the SRI Medicinal Chemistry Laboratory on 31 Mar...selectively disfacilitating the activity of the histaminergic, serotonergic , noradrenergic and cholinergic wake-promoting systems whereas the BzRA ZOL... Chemistry Laboratory. Appendix 3. Service report for the reinstallation and calibration of HPLC/EC system #1 (detection of norepinephrine, epinephrine

CNA Independent Assessment: Air Force Acquisition. Return to Excellence

DTIC Science & Technology

2009-02-01

symptoms that indicate problems with its acquisition system and processes. Some of the most pressing of these symptoms have been: Numerous cost...indicate problems with its acquisition system and proc- esses. Some of the most pressing of these symptoms have been: Frequent cost-schedule performance...Military Deputy MS Milestone NAVAIR Naval Air Systems Command PAR Program Assessment Review PCO Principal Contracting Officer PDR

Scheduling: A guide for program managers

NASA Technical Reports Server (NTRS)

1994-01-01

The following topics are discussed concerning scheduling: (1) milestone scheduling; (2) network scheduling; (3) program evaluation and review technique; (4) critical path method; (5) developing a network; (6) converting an ugly duckling to a swan; (7) network scheduling problem; (8) (9) network scheduling when resources are limited; (10) multi-program considerations; (11) influence on program performance; (12) line-of-balance technique; (13) time management; (14) recapitulization; and (15) analysis.

FT. Sam 91 Whiskey Combat Medic Medical Simulation Training Quantitative Integration Enhancement Program

DTIC Science & Technology

2011-07-01

joined the project team in the statistical and research coordination role. Dr. Collin is an employee at the University of Pittsburgh. A successful...3. Submit to Ft. Detrick Completed Milestone: Statistical analysis planning 1. Review planned data metrics and data gathering tools...approach to performance assessment for continuous quality improvement.  Analyzing data with modern statistical techniques to determine the

Tank waste remediation system nuclear criticality safety program management review

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRADY RAAP, M.C.

1999-06-24

This document provides the results of an internal management review of the Tank Waste Remediation System (TWRS) criticality safety program, performed in advance of the DOE/RL assessment for closure of the TWRS Nuclear Criticality Safety Issue, March 1994. Resolution of the safety issue was identified as Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-40-12, due September 1999.

Milestone Completion Report WBS 1.3.5.05 ECP/VTK-m FY17Q4 [MS-17/03-06] Key Reduce / Spatial Division / Basic Advect / Normals STDA05-4.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moreland, Kenneth D.

The FY17Q4 milestone of the ECP/VTK-m project includes the completion of a key-reduce scheduling mechanism, a spatial division algorithm, an algorithm for basic particle advection, and the computation of smoothed surface normals. With the completion of this milestone, we are able to, respectively, more easily group like elements (a common visualization algorithm operation), provide the fundamentals for geometric search structures, provide the fundamentals for many flow visualization algorithms, and provide more realistic rendering of surfaces approximated with facets.

First stirrings: cultural notes on orgasm, ejaculation, and wet dreams.

PubMed

Janssen, Diederik F

2007-05-01

Both the findings and the limitations of numeric milestone research in sexology have a bearing on the pedagogical status of pleasure, as well as the cultural underpinnings of the notion of a psychosexual milestone. An overview is offered of international data pertaining to the chronology of three "milestones" in sexual autobiography: first orgasm (orgasmarche), first ejaculation (oigarche), and first wet dream (nocturnal emission). Methodological problems associated with the measurement of these variables are discussed. These problems are then situated in a culturalist perspective. It is concluded that orgasms are cultural artifacts in terms of their chronological occurrence as well as perceived salience, necessity, and "age appropriateness".

Nightshade Prototype Experiments (Silverleaf)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Danielson, Jeremy; Bauer, Amy L.

2016-12-23

The Red Sage campaign is a series of subcritical dynamic plutonium experiments designed to measure ejecta. Nightshade, the first experiments in Red Sage scheduled for fiscal year 2019, will measure the amount of ejecta emission into vacuum from a double-­shocked plutonium surface. To address the major technical risks in Nightshade, a Level 2 milestone was developed for fiscal year 2016. Silverleaf, a series of four experiments, was executed at the Los Alamos National Laboratory in July and August 2016 to demonstrate a prototype of the Nightshade package and to satisfy this Level 2 milestone. This report is documentation that Redmore » Sage Level 2 milestone requirements were successfully met.« less

Aviation Medicine: global historical perspectives and the development of Aviation Medicine alongside the growth of Singapore's aviation landscape.

PubMed

Gan, W H; Low, R; Singh, J

2011-05-01

Aviation Medicine traces its roots to high altitude physiology more than 400 years ago. Since then, great strides have been made in this medical specialty, initially catalysed by the need to reduce pilot medical attrition during the World Wars, and more recently, fuelled by the explosive growth in globalised commercial air travel. This paper traces the historical milestones in Aviation Medicine, and maps its development in Singapore since the 1960s. Advancements in military aviation platforms and technology as well as the establishment of Singapore as an international aviation hub have propelled Aviation Medicine in Singapore to the forefront of many domains. These span Aviation Physiology training, selection medical standards, performance maximisation, as well as crew and passenger protection against communicable diseases arising from air travel. The year 2011 marks the centennial milestone of the first manned flight in Singapore, paving the way for further growth of Aviation Medicine as a mature specialty in Singapore.

Fiber-Optic Linear Displacement Sensor Based On Matched Interference Filters

NASA Astrophysics Data System (ADS)

Fuhr, Peter L.; Feener, Heidi C.; Spillman, William B.

1990-02-01

A fiber optic linear displacement sensor has been developed in which a pair of matched interference filters are used to encode linear position on a broadband optical signal as relative intensity variations. As the filters are displaced, the optical beam illuminates varying amounts of each filter. Determination of the relative intensities at each filter pairs' passband is based on measurements acquired with matching filters and photodetectors. Source power variation induced errors are minimized by basing determination of linear position on signal Visibility. A theoretical prediction of the sensor's performance is developed and compared with experiments performed in the near IR spectral region using large core multimode optical fiber.

[Design Method Analysis and Performance Comparison of Wall Filter for Ultrasound Color Flow Imaging].

PubMed

Wang, Lutao; Xiao, Jun; Chai, Hua

2015-08-01

The successful suppression of clutter arising from stationary or slowly moving tissue is one of the key issues in medical ultrasound color blood imaging. Remaining clutter may cause bias in the mean blood frequency estimation and results in a potentially misleading description of blood-flow. In this paper, based on the principle of general wall-filter, the design process of three classes of filters, infinitely impulse response with projection initialization (Prj-IIR), polynomials regression (Pol-Reg), and eigen-based filters are previewed and analyzed. The performance of the filters was assessed by calculating the bias and variance of a mean blood velocity using a standard autocorrelation estimator. Simulation results show that the performance of Pol-Reg filter is similar to Prj-IIR filters. Both of them can offer accurate estimation of mean blood flow speed under steady clutter conditions, and the clutter rejection ability can be enhanced by increasing the ensemble size of Doppler vector. Eigen-based filters can effectively remove the non-stationary clutter component, and further improve the estimation accuracy for low speed blood flow signals. There is also no significant increase in computation complexity for eigen-based filters when the ensemble size is less than 10.

Correction of ultrasonic wave aberration with a time delay and amplitude filter.

PubMed

Måsøy, Svein-Erik; Johansen, Tonni F; Angelsen, Bjørn

2003-04-01

Two-dimensional simulations with propagation through two different heterogeneous human body wall models have been performed to analyze different correction filters for ultrasonic wave aberration due to forward wave propagation. The different models each produce most of the characteristic aberration effects such as phase aberration, relatively strong amplitude aberration, and waveform deformation. Simulations of wave propagation from a point source in the focus (60 mm) of a 20 mm transducer through the body wall models were performed. Center frequency of the pulse was 2.5 MHz. Corrections of the aberrations introduced by the two body wall models were evaluated with reference to the corrections obtained with the optimal filter: a generalized frequency-dependent phase and amplitude correction filter [Angelsen, Ultrasonic Imaging (Emantec, Norway, 2000), Vol. II]. Two correction filters were applied, a time delay filter, and a time delay and amplitude filter. Results showed that correction with a time delay filter produced substantial reduction of the aberration in both cases. A time delay and amplitude correction filter performed even better in both cases, and gave correction close to the ideal situation (no aberration). The results also indicated that the effect of the correction was very sensitive to the accuracy of the arrival time fluctuations estimate, i.e., the time delay correction filter.

Stability and performance of notch filter control for unbalance response

NASA Technical Reports Server (NTRS)

Knospe, C. R.

1992-01-01

Many current applications of magnetic bearings for rotating machinery employ notch filters in the feedback control loop to reduce the synchronous forces transmitted through the bearings. The capabilities and limitations of notch filter control are investigated. First, a rigid rotor is examined with some classical root locus techniques. Notch filter control is shown to result in conditional stability whenever complete synchronous attenuation is required. Next, a nondimensional parametric symmetric flexible three mass rotor model is constructed. An examination of this model for several test cases illustrates the limited attenuation possible with notch filters at and near the system critical speeds when the bearing damping is low. The notch filter's alteration of the feedback loop is shown to cause stability problems which limits performance. Poor transient response may also result. A high speed compressor is then examined as a candidate for notch filter control. A collocated 22 mass station model with lead-lag control is used. The analysis confirms the reduction in stability robustness that can occur with notch filter control. It is concluded that other methods of synchronous vibration control yield greater performance without compromising stability.

Characterization Of Improved Binary Phase-Only Filters In A Real-Time Coherent Optical Correlation System

NASA Astrophysics Data System (ADS)

Flannery, D.; Keller, P.; Cartwright, S.; Loomis, J.

1987-06-01

Attractive correlation system performance potential is possible using magneto-optic spatial light modulators (SLM) to implement binary phase-only reference filters at high rates, provided the correlation performance of such reduced-information-content filters is adequate for the application. In the case studied here, the desired filter impulse response is a rectangular shape, which cannot be achieved with the usual binary phase-only filter formulation. The correlation application problem is described and techniques for synthesizing improved filter impulse response are considered. A compromise solution involves the cascading of a fixed amplitude-only weighting mask with the binary phase-only SLM. Based on simulations presented, this approach provides improved impulse responses and good correlation performance, while retaining the critical feature of real-time variations of the size, shape, and orientation of the rectangle by electronic programming of the phase pattern in the SLM. Simulations indicate that, for at least one very challenging input scene clutter situation, these filters provide higher correlation signal-to-noise than does "ideal" correlation, i.e. using a perfect rectangle filter response.

Extrapolating target tracks

NASA Astrophysics Data System (ADS)

Van Zandt, James R.

2012-05-01

Steady-state performance of a tracking filter is traditionally evaluated immediately after a track update. However, there is commonly a further delay (e.g., processing and communications latency) before the tracks can actually be used. We analyze the accuracy of extrapolated target tracks for four tracking filters: Kalman filter with the Singer maneuver model and worst-case correlation time, with piecewise constant white acceleration, and with continuous white acceleration, and the reduced state filter proposed by Mookerjee and Reifler.1, 2 Performance evaluation of a tracking filter is significantly simplified by appropriate normalization. For the Kalman filter with the Singer maneuver model, the steady-state RMS error immediately after an update depends on only two dimensionless parameters.3 By assuming a worst case value of target acceleration correlation time, we reduce this to a single parameter without significantly changing the filter performance (within a few percent for air tracking).4 With this simplification, we find for all four filters that the RMS errors for the extrapolated state are functions of only two dimensionless parameters. We provide simple analytic approximations in each case.

Feature aided Monte Carlo probabilistic data association filter for ballistic missile tracking

NASA Astrophysics Data System (ADS)

Ozdemir, Onur; Niu, Ruixin; Varshney, Pramod K.; Drozd, Andrew L.; Loe, Richard

2011-05-01

The problem of ballistic missile tracking in the presence of clutter is investigated. Probabilistic data association filter (PDAF) is utilized as the basic filtering algorithm. We propose to use sequential Monte Carlo methods, i.e., particle filters, aided with amplitude information (AI) in order to improve the tracking performance of a single target in clutter when severe nonlinearities exist in the system. We call this approach "Monte Carlo probabilistic data association filter with amplitude information (MCPDAF-AI)." Furthermore, we formulate a realistic problem in the sense that we use simulated radar cross section (RCS) data for a missile warhead and a cylinder chaff using Lucernhammer1, a state of the art electromagnetic signature prediction software, to model target and clutter amplitude returns as additional amplitude features which help to improve data association and tracking performance. A performance comparison is carried out between the extended Kalman filter (EKF) and the particle filter under various scenarios using single and multiple sensors. The results show that, when only one sensor is used, the MCPDAF performs significantly better than the EKF in terms of tracking accuracy under severe nonlinear conditions for ballistic missile tracking applications. However, when the number of sensors is increased, even under severe nonlinear conditions, the EKF performs as well as the MCPDAF.

Formulation and implementation of nonstationary adaptive estimation algorithm with applications to air-data reconstruction

NASA Technical Reports Server (NTRS)

Whitmore, S. A.

1985-01-01

The dynamics model and data sources used to perform air-data reconstruction are discussed, as well as the Kalman filter. The need for adaptive determination of the noise statistics of the process is indicated. The filter innovations are presented as a means of developing the adaptive criterion, which is based on the true mean and covariance of the filter innovations. A method for the numerical approximation of the mean and covariance of the filter innovations is presented. The algorithm as developed is applied to air-data reconstruction for the space shuttle, and data obtained from the third landing are presented. To verify the performance of the adaptive algorithm, the reconstruction is also performed using a constant covariance Kalman filter. The results of the reconstructions are compared, and the adaptive algorithm exhibits better performance.

An optimal search filter for retrieving systematic reviews and meta-analyses

PubMed Central

2012-01-01

Background Health-evidence.ca is an online registry of systematic reviews evaluating the effectiveness of public health interventions. Extensive searching of bibliographic databases is required to keep the registry up to date. However, search filters have been developed to assist in searching the extensive amount of published literature indexed. Search filters can be designed to find literature related to a certain subject (i.e. content-specific filter) or particular study designs (i.e. methodological filter). The objective of this paper is to describe the development and validation of the health-evidence.ca Systematic Review search filter and to compare its performance to other available systematic review filters. Methods This analysis of search filters was conducted in MEDLINE, EMBASE, and CINAHL. The performance of thirty-one search filters in total was assessed. A validation data set of 219 articles indexed between January 2004 and December 2005 was used to evaluate performance on sensitivity, specificity, precision and the number needed to read for each filter. Results Nineteen of 31 search filters were effective in retrieving a high level of relevant articles (sensitivity scores greater than 85%). The majority achieved a high degree of sensitivity at the expense of precision and yielded large result sets. The main advantage of the health-evidence.ca Systematic Review search filter in comparison to the other filters was that it maintained the same level of sensitivity while reducing the number of articles that needed to be screened. Conclusions The health-evidence.ca Systematic Review search filter is a useful tool for identifying published systematic reviews, with further screening to identify those evaluating the effectiveness of public health interventions. The filter that narrows the focus saves considerable time and resources during updates of this online resource, without sacrificing sensitivity. PMID:22512835

Frequency agile microwave photonic notch filter with anomalously high stopband rejection.

PubMed

Marpaung, David; Morrison, Blair; Pant, Ravi; Eggleton, Benjamin J

2013-11-01

We report a novel class microwave photonic (MWP) notch filter with a very narrow isolation bandwidth (10 MHz), an ultrahigh stopband rejection (>60 dB), a wide frequency tuning (1-30 GHz), and flexible bandwidth reconfigurability (10-65 MHz). This performance is enabled by a new concept of sideband amplitude and phase controls using an electro-optic modulator and an optical filter. This concept enables energy efficient operation in active MWP notch filters, and opens up a pathway toward enabling low-power nanophotonic devices as high-performance RF filters.

Technology transfer from biomedical research to clinical practice: measuring innovation performance.

PubMed

Balas, E Andrew; Elkin, Peter L

2013-12-01

Studies documented 17 years of transfer time from clinical trials to practice of care. Launched in 2002, the National Institutes of Health (NIH) translational research initiative needs to develop metrics for impact assessment. A recent White House report highlighted that research and development productivity is declining as a result of increased research spending while the new drugs output is flat. The goal of this study was to develop an expanded model of research-based innovation and performance thresholds of transfer from research to practice. Models for transfer of research to practice have been collected and reviewed. Subsequently, innovation pathways have been specified based on common characteristics. An integrated, intellectual property transfer model is described. The central but often disregarded role of research innovation disclosure is highlighted. Measures of research transfer and milestones of progress have been identified based on the Association of University Technology Managers 2012 performance reports. Numeric milestones of technology transfer are recommended at threshold (top 50%), target (top 25%), and stretch goal (top 10%) performance levels. Transfer measures and corresponding target levels include research spending to disclosure (<$1.88 million), disclosure to patents (>0.81), patents to start-up (>0.1), patents to licenses (>2.25), and average per license income (>$48,000). Several limitations of measurement are described. Academic institutions should take strategic steps to bring innovation to the center of scholarly discussions. Research on research, particularly on pathways to disclosures, is needed to improve R&D productivity. Researchers should be informed about the technology transfer performance of their institution and regulations should better support innovators.

Endorsement and Timing of Sexual Orientation Developmental Milestones Among Sexual Minority Young Adults in the Growing Up Today Study

PubMed Central

Katz-Wise, Sabra L.; Rosario, Margaret; Calzo, Jerel P.; Scherer, Emily A.; Sarda, Vishnudas; Austin, S. Bryn

2017-01-01

This research examined endorsement and timing of sexual orientation developmental milestones. Participants were 1235 females and 398 males from the Growing Up Today Study, ages 22 to 29 years, who endorsed a sexual minority orientation (lesbian/gay, bisexual, mostly heterosexual) or reported same-gender sexual behavior (heterosexual with same-gender sexual experience). An online survey measured current sexual orientation and endorsement and timing (age first experienced) of five sexual orientation developmental milestones: same-gender attractions, other-gender attractions, same-gender sexual experience, other-gender sexual experience, and sexual minority identification. Descriptive analyses and analyses to test for gender and sexual orientation group differences were conducted. Results indicated that females were more likely than males to endorse same-gender attraction, other-gender attraction, and other-gender sexual experience, with the most gender differences in endorsement among mostly heterosexuals and heterosexuals with same-gender sexual experience. In general, males reached milestones earlier than females, with the most gender differences in timing among lesbian and gay individuals and heterosexuals with same-gender sexual experience. Results suggest that the three sexual minority developmental milestones may best characterize the experiences of lesbians, gay males, and female and male bisexuals. More research is needed to understand sexual orientation development among mostly heterosexuals and heterosexuals with same-gender sexual experience. PMID:27148762

Maternal expectations about normal child development in 4 cultural groups.

PubMed

Pachter, L M; Dworkin, P H

1997-11-01

To determine whether expectations about normal infant and child development are different among mothers from 4 ethnocultural groups. Two hundred fifty-five mothers (90 Puerto Rican, 59 African American, 69 European American, 37 West Indian-Caribbean) whose children received health care at hospital-based pediatric clinics and private pediatricians' and family practitioners' offices. Verbally administered questionnaire that included 25 questions in which mothers were asked to give their opinions about the age at which a normal child should begin to accomplish standard developmental milestones. Responses (mean ages at which mothers expected children to attain the milestones) from each group were compared after controlling for age of mother, number of children, level of education, and socioeconomic status. Significant differences among ethnic groups' responses were seen for 9 of 25 developmental milestones. Differences were mainly seen among personal and social milestones, and Puerto Rican mothers tended to expect children to attain these milestones at a later age than did other mothers. No differences in responses were seen between Spanish- and English-speaking Puerto Rican mothers. European-American mothers expected children to take first steps and become toilet trained at a later age. Developmental expectations differ among mothers from different ethnocultural groups. Many of these differences can be explained by underlying cultural beliefs and values and specific child-rearing practices. Clinicians should ask about maternal expectations during child health visits to interpret mothers' concerns and opinions about their children's development.

Endorsement and Timing of Sexual Orientation Developmental Milestones Among Sexual Minority Young Adults in the Growing Up Today Study.

PubMed

Katz-Wise, Sabra L; Rosario, Margaret; Calzo, Jerel P; Scherer, Emily A; Sarda, Vishnudas; Austin, S Bryn

2017-02-01

This research examined endorsement and timing of sexual orientation developmental milestones. Participants were 1,235 females and 398 males from the Growing Up Today Study, ages 22 to 29 years, who endorsed a sexual minority orientation (lesbian/gay, bisexual, mostly heterosexual) or reported same-gender sexual behavior (heterosexual with same-gender sexual experience). An online survey measured current sexual orientation and endorsement and timing (age first experienced) of five sexual orientation developmental milestones: same-gender attractions, other-gender attractions, same-gender sexual experience, other-gender sexual experience, and sexual minority identification. Descriptive analyses and analyses to test for gender and sexual orientation group differences were conducted. Results indicated that women were more likely than men to endorse same-gender attraction, other-gender attraction, and other-gender sexual experience, with the most gender differences in endorsement among mostly heterosexuals and heterosexuals with same-gender sexual experience. In general, men reached milestones earlier than women, with the most gender differences in timing among lesbian and gay individuals and heterosexuals with same-gender sexual experience. Results suggest that the three sexual minority developmental milestones may best characterize the experiences of lesbians, gay males, and female and male bisexuals. More research is needed to understand sexual orientation development among mostly heterosexuals and heterosexuals with same-gender sexual experience.

Modeling vegetative filter performance with VFSMOD

Treesearch

Matthew J. Helmers; Dean E. Eisenhauer; Michael G. Dosskey; Thomas G. Franti

2002-01-01

The model VFSMOD was used to investigate the effect of varying watershed characteristics and buffer dimensions on the sediment trapping efficiency of vegetative filters. This investigation allows for a better understanding of how watershed characteristics, buffer dimensions, and storm characteristics impact the performance of vegetative filters. Using VFSMOD,...

The Development of a Microbial Challenge Test with Acholeplasma laidlawii To Rate Mycoplasma-Retentive Filters by Filter Manufacturers.

PubMed

Folmsbee, Martha; Lentine, Kerry Roche; Wright, Christine; Haake, Gerhard; Mcburnie, Leesa; Ashtekar, Dilip; Beck, Brian; Hutchison, Nick; Okhio-Seaman, Laura; Potts, Barbara; Pawar, Vinayak; Windsor, Helena

2014-01-01

Mycoplasma are bacteria that can penetrate 0.2 and 0.22 μm rated sterilizing-grade filters and even some 0.1 μm rated filters. Primary applications for mycoplasma filtration include large scale mammalian and bacterial cell culture media and serum filtration. The Parenteral Drug Association recognized the absence of standard industry test parameters for testing and classifying 0.1 μm rated filters for mycoplasma clearance and formed a task force to formulate consensus test parameters. The task force established some test parameters by common agreement, based upon general industry practices, without the need for additional testing. However, the culture medium and incubation conditions, for generating test mycoplasma cells, varied from filter company to filter company and was recognized as a serious gap by the task force. Standardization of the culture medium and incubation conditions required collaborative testing in both commercial filter company laboratories and in an Independent laboratory (Table I). The use of consensus test parameters will facilitate the ultimate cross-industry goal of standardization of 0.1 μm filter claims for mycoplasma clearance. However, it is still important to recognize filter performance will depend on the actual conditions of use. Therefore end users should consider, using a risk-based approach, whether process-specific evaluation of filter performance may be warranted for their application. Mycoplasma are small bacteria that have the ability to penetrate sterilizing-grade filters. Filtration of large-scale mammalian and bacterial cell culture media is an example of an industry process where effective filtration of mycoplasma is required. The Parenteral Drug Association recognized the absence of industry standard test parameters for evaluating mycoplasma clearance filters by filter manufacturers and formed a task force to formulate such a consensus among manufacturers. The use of standardized test parameters by filter manufacturers, including the preparation of the culture broth, will facilitate the end user's evaluation of the mycoplasma clearance claims provided by filter vendors. However, it is still important to recognize filter performance will depend on the actual conditions of use; therefore end users should consider, using a risk-based approach, whether process-specific evaluation of filter performance may be warranted for their application. © PDA, Inc. 2014.

Systematic evaluation of dissolved lead sorption losses to particulate syringe filter materials.

PubMed

Minning, Thomas; Lytle, Darren A; Pham, Maily; Kelty, Keith

2015-06-01

Distinguishing between soluble and particulate lead in drinking water is useful in understanding the mechanism of lead release and identifying remedial action. Typically, particulate lead is defined as the amount of lead removed by a 0.45-μm filter. Unfortunately, there is little guidance regarding selection of filter membrane material and little consideration to the possibility of the sorption of dissolved lead to the filter. The objective of this work was to examine the tendency of 0.45-μm syringe filter materials to adsorb lead. Tests were performed with water containing 40 and 24 μg/L soluble lead at pH 7 buffered with 50 mg C/L dissolved inorganic concentration (DIC). The amounts of lead sorbed greatly varied by filter, and only two filter types, polypropylene and mixed cellulose esters, performed well and are recommended. Great care must be taken in choosing a filter when filtering soluble lead and interpreting filter results.

Centennial review of corneal transplantation.

PubMed

Moffatt, S Louise; Cartwright, Victoria A; Stumpf, Thomas H

2005-12-01

Abstract One hundred years ago, on 7 December 1905, Dr Eduard Zirm performed the world's first successful human corneal transplant. This significant milestone was achieved only after many decades of unsuccessful trial and error; however, it did not lead to relatively 'routine' keratoplasty success for several more decades. The idea of replacing an opaque cornea had been suggested for centuries, and had stimulated theoretical approaches to the problem by many esteemed physicians throughout history. However, little practical progress was made in the ultimate realization of the dream until the 19th century when pioneering surgeons pursued extensive studies in relation to both animal and human 'keratoplasty'. Clinical progress and scientific insight developed slowly, and it was ultimately due to parallel advances in medicine such as anaesthesia and antisepsis that Zirm's success was finally achieved. Key concepts were enshrined such as the use of fresh tissue from the same species, careful placement and handling of tissue, and the development of specialized instrumentation such as the circular trephine. In the latter half of the 20th century, many 'masters' of corneal surgery evolved significant refinements in technique and instrumentation with the development of corticosteroids, antibiotics, surgical microscopes, improved trephines, viscoelastics and suture materials, that enable this delicate procedure to be routinely performed with the prospect of success. There are still limitations to corneal transplantation, and corneal allograft rejection still poses the greatest challenge to the modern corneal surgeon. In the foreseeable future it may be in the laboratory, rather than the theatre, that further milestones will be achieved. This review aims to highlight the significant milestones in the rich history of corneal transplantation, and to pay tribute to the many inspired and dedicated individuals involved in the development of keratoplasty to a point where the procedure is now a standard tool in the repertoire of ophthalmic surgery and more than a million people have enjoyed restoration of useful sight.

Closed-Loop Acoustic Control of Reverberant Room for Satellite Environmental Testing

NASA Astrophysics Data System (ADS)

Janssens, Karl; Bianciardi, Fabio; Sabbatini, Danilo; Debille, Jan; Carrella, Alex

2012-07-01

The full satellite acoustic test is an important milestone in a satellite launch survivability verification campaign. This test is required to verify the satellite’s mechanical design against the high-level acoustic loads induced by the launch vehicle during the atmospheric flight. During the test, the satellite is subjected to a broadband diffuse acoustic field, reproducing the pressure levels observed during launch. The excitation is in most cases provided by a combination of horns for the low frequencies and noise generators for the higher frequencies. Acoustic control tests are commonly performed in reverberant rooms, controlling the sound pressure levels in third octave bands over the specified target spectrum. This paper discusses an automatic feedback control system for acoustic control of large reverberation rooms for satellite environmental testing. The acoustic control system consists of parallel third octave PI (Proportional Integral) feedback controllers that take the reverberation characteristics of the room into consideration. The drive output of the control system is shaped at every control step based on the comparison of the average third octave noise spectrum, measured from a number of microphones in the test room, with the target spectrum. Cross-over filters split the output drive into band- limited signals to feed each of the horns. The control system is realized in several steps. In the first phase, a dynamic process model is developed, including the non-linear characteristics of the horns and the reverberant properties of the room. The model is identified from dynamic experiments using system identification techniques. In the next phase, an adequate control strategy is designed which is capable of reaching the target spectrum in the required time period without overshoots. This control strategy is obtained from model-in-the-loop (MIL) simulations, evaluating the performance of various potential strategies. Finally, the proposed strategy is implemented in real-time and its control performance tested and validated.

Design of coupled mace filters for optical pattern recognition using practical spatial light modulators

NASA Technical Reports Server (NTRS)

Rajan, P. K.; Khan, Ajmal

1993-01-01

Spatial light modulators (SLMs) are being used in correlation-based optical pattern recognition systems to implement the Fourier domain filters. Currently available SLMs have certain limitations with respect to the realizability of these filters. Therefore, it is necessary to incorporate the SLM constraints in the design of the filters. The design of a SLM-constrained minimum average correlation energy (SLM-MACE) filter using the simulated annealing-based optimization technique was investigated. The SLM-MACE filter was synthesized for three different types of constraints. The performance of the filter was evaluated in terms of its recognition (discrimination) capabilities using computer simulations. The correlation plane characteristics of the SLM-MACE filter were found to be reasonably good. The SLM-MACE filter yielded far better results than the analytical MACE filter implemented on practical SLMs using the constrained magnitude technique. Further, the filter performance was evaluated in the presence of noise in the input test images. This work demonstrated the need to include the SLM constraints in the filter design. Finally, a method is suggested to reduce the computation time required for the synthesis of the SLM-MACE filter.

Value of its information for congestion avoidance in inter-modal transportation systems : phase II, final report, March 2010.

DOT National Transportation Integrated Search

2010-03-01

Our project has four major mile-stones for the second year: : Mile-stone #1: Develop Dynamic Inter-modal Transportation Optimization Models: For : mostly air-road network and inter-modal networks significant to OHIO : MICHIGAN regions and our collabo...

FIELD MEASUREMENT TECHNOLOGY FOR MERCURY IN SOIL AND SEDIMENT MILESTONE INC.'S DIRECT MERCURY ANALYZER (DMA)-80

EPA Science Inventory

Milestone's Direct Mercury Analyzer (DMA-80) was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in May 2003 at the Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee. The purpose of the Demonstration was to...

Relations of Alcohol Consumption with Smoking Cessation Milestones and Tobacco Dependence

ERIC Educational Resources Information Center

Cook, Jessica W.; Fucito, Lisa M.; Piasecki, Thomas M.; Piper, Megan E.; Schlam, Tanya R.; Berg, Kristin M.; Baker, Timothy B.

2012-01-01

Objective: Alcohol consumption is associated with smoking cessation failure in both community and clinical research. However, little is known about the relation between alcohol consumption and smoking cessation milestones (i.e., achieving initial abstinence, avoiding lapses and relapse). Our objective in this research was to examine the relations…

25 Legal and Legislative Milestones

ERIC Educational Resources Information Center

Diverse: Issues in Higher Education, 2009

2009-01-01

This timeline reflects some of the most significant legal and legislative milestones that have influenced higher education over the 25 years that "Diverse: Issues in Higher Education," formerly "Black Issues in Higher Education," has been in print. The legal battles have primarily involved the settlement of desegregation cases and the use of race…

Developmental Milestones in Toddlers with Atypical Development

ERIC Educational Resources Information Center

Horovitz, Max; Matson, Johnny L.

2011-01-01

The attainment of developmental milestones was examined and compared in 162 infants and toddlers with developmental disabilities, including Down Syndrome (n = 26), Cerebral Palsy (n = 19), Global Developmental Delay (n = 22), Premature birth (n = 66), and Seizure Disorder (n = 29). Toddlers in the Seizures Disorder group began crawling at a…

University Facilitation of School Restructuring: Critical Milestones for Organization Transformation.

ERIC Educational Resources Information Center

Davidson, Betty M.; Allen-Haynes, Leetta

Critical milestones in the university facilitation of meaningful school reform in schools serving at-risk students--schoolwide assessment, cadre-based planning, and pilot testing of new strategies--are examined in this paper. A training and facilitation mechanism developed by the University of New Orleans' (UNO) Louisiana Accelerated Schools…

Chronology of Milestones for Libraries and Adult Lifelong Learning and Literacy.

ERIC Educational Resources Information Center

McCook, Kathleen de la Pena; Barber, Peggy

This chronology highlights milestones for libraries and adult lifelong learning and literacy from 1924-2001, including the following events: William S. Learned's "The American Public Library and the Diffusion of Knowledge" is published (1924); establishment of the ALA (American Library Association) Adult Education Section (1946); the…

Providing lipid-based nutrient supplements does not affect developmental milestones among Malawian children

USDA-ARS?s Scientific Manuscript database

Our objective was to assess whether using lipid-based nutrient supplements (LNS) to complement the diets of infants and young children affected when they achieved selected developmental milestones. In rural Malawi, 840 6-month-old healthy infants were enrolled to a randomised trial. Control particip...

20 CFR 411.535 - Under what circumstances will milestones be paid?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Under what circumstances will milestones be paid? 411.535 Section 411.535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.535 Under what circumstances will...

20 CFR 411.535 - Under what circumstances will milestones be paid?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Under what circumstances will milestones be paid? 411.535 Section 411.535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.535 Under what circumstances will...

20 CFR 411.535 - Under what circumstances will milestones be paid?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Under what circumstances will milestones be paid? 411.535 Section 411.535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.535 Under what circumstances will...

20 CFR 411.535 - Under what circumstances will milestones be paid?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Under what circumstances will milestones be paid? 411.535 Section 411.535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.535 Under what circumstances will...

20 CFR 411.535 - Under what circumstances will milestones be paid?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Under what circumstances will milestones be paid? 411.535 Section 411.535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.535 Under what circumstances will...

Blind Source Parameters for Performance Evaluation of Despeckling Filters.

PubMed

Biradar, Nagashettappa; Dewal, M L; Rohit, ManojKumar; Gowre, Sanjaykumar; Gundge, Yogesh

2016-01-01

The speckle noise is inherent to transthoracic echocardiographic images. A standard noise-free reference echocardiographic image does not exist. The evaluation of filters based on the traditional parameters such as peak signal-to-noise ratio, mean square error, and structural similarity index may not reflect the true filter performance on echocardiographic images. Therefore, the performance of despeckling can be evaluated using blind assessment metrics like the speckle suppression index, speckle suppression and mean preservation index (SMPI), and beta metric. The need for noise-free reference image is overcome using these three parameters. This paper presents a comprehensive analysis and evaluation of eleven types of despeckling filters for echocardiographic images in terms of blind and traditional performance parameters along with clinical validation. The noise is effectively suppressed using the logarithmic neighborhood shrinkage (NeighShrink) embedded with Stein's unbiased risk estimation (SURE). The SMPI is three times more effective compared to the wavelet based generalized likelihood estimation approach. The quantitative evaluation and clinical validation reveal that the filters such as the nonlocal mean, posterior sampling based Bayesian estimation, hybrid median, and probabilistic patch based filters are acceptable whereas median, anisotropic diffusion, fuzzy, and Ripplet nonlinear approximation filters have limited applications for echocardiographic images.

Interactions between protein molecules and the virus removal membrane surface: Effects of immunoglobulin G adsorption and conformational changes on filter performance.

PubMed

Hamamoto, Ryo; Ito, Hidemi; Hirohara, Makoto; Chang, Ryongsok; Hongo-Hirasaki, Tomoko; Hayashi, Tomohiro

2018-03-01

Membrane fouling commonly occurs in all filter types during virus filtration in protein-based biopharmaceutical manufacturing. Mechanisms of decline in virus filter performance due to membrane fouling were investigated using a cellulose-based virus filter as a model membrane. Filter performance was critically dependent on solution conditions; specifically, ionic strength. To understand the interaction between immunoglobulin G (IgG) and cellulose, sensors coated with cellulose were fabricated for surface plasmon resonance and quartz crystal microbalance with energy dissipation measurements. The primary cause of flux decline appeared to be irreversible IgG adsorption on the surface of the virus filter membrane. In particular, post-adsorption conformational changes in the IgG molecules promoted further irreversible IgG adsorption, a finding that could not be adequately explained by DLVO theory. Analyses of adsorption and desorption and conformational changes in IgG molecules on cellulose surfaces mimicking cellulose-based virus removal membranes provide an effective approach for identifying ways of optimizing solution conditions to maximize virus filter performance. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:379-386, 2018. © 2017 American Institute of Chemical Engineers.

Blind Source Parameters for Performance Evaluation of Despeckling Filters

PubMed Central

Biradar, Nagashettappa; Dewal, M. L.; Rohit, ManojKumar; Gowre, Sanjaykumar; Gundge, Yogesh

2016-01-01

The speckle noise is inherent to transthoracic echocardiographic images. A standard noise-free reference echocardiographic image does not exist. The evaluation of filters based on the traditional parameters such as peak signal-to-noise ratio, mean square error, and structural similarity index may not reflect the true filter performance on echocardiographic images. Therefore, the performance of despeckling can be evaluated using blind assessment metrics like the speckle suppression index, speckle suppression and mean preservation index (SMPI), and beta metric. The need for noise-free reference image is overcome using these three parameters. This paper presents a comprehensive analysis and evaluation of eleven types of despeckling filters for echocardiographic images in terms of blind and traditional performance parameters along with clinical validation. The noise is effectively suppressed using the logarithmic neighborhood shrinkage (NeighShrink) embedded with Stein's unbiased risk estimation (SURE). The SMPI is three times more effective compared to the wavelet based generalized likelihood estimation approach. The quantitative evaluation and clinical validation reveal that the filters such as the nonlocal mean, posterior sampling based Bayesian estimation, hybrid median, and probabilistic patch based filters are acceptable whereas median, anisotropic diffusion, fuzzy, and Ripplet nonlinear approximation filters have limited applications for echocardiographic images. PMID:27298618

Burnout is Associated With Emotional Intelligence but not Traditional Job Performance Measurements in Surgical Residents.

PubMed

Cofer, Kevin D; Hollis, Robert H; Goss, Lauren; Morris, Melanie S; Porterfield, John R; Chu, Daniel I

2018-02-23

To evaluate whether burnout was associated with emotional intelligence and job performance in surgical residents. General surgery residents at a single institution were surveyed using the Maslach Burnout Inventory (MBI) and trait EI questionnaire (TEIQ-SF). Burnout was defined as scoring in 2 of the 3 following domains; Emotional Exhaustion (high), Depersonalization (high), and Personal Accomplishment (low). Job performance was evaluated using faculty evaluations of clinical competency-based surgical milestones and standardized test scores including the American Board of Surgery In-Training Exam (ABSITE) and the United States Medical Licensing Examination (USMLE) Step 3. USMLE Step 1 and USMLE Step 2, which were taken prior to residency training, were included to examine possible associations of burnout with USMLE examinations. Statistical comparison was made using Pearson correlation and simple linear regression adjusting for PGY level. This study was conducted at the University of Alabama at Birmingham (UAB) general surgery residency program. All current and incoming general surgery residents at UAB were invited to participate in this study. Forty residents participated in the survey (response rate 77%). Ten residents, evenly distributed from incoming residents to PGY-4, had burnout (25%). Mean global EI was lower in residents with burnout versus those without burnout (3.71 vs 3.9, p = 0.02). Of the 4 facets of EI, mean self-control values were lower in residents with burnout versus those without burnout (3.3 vs 4.06, p < 0.01). Each component of burnout was associated with global EI, with the strongest correlation being with personal accomplishment (r = 0.64; p < 0.01). Residents with burnout did not have significantly different mean scores for USMLE Step 1 (229 vs 237, p = 0.12), Step 2 (248 vs 251, p = 0.56), Step 3 (223 vs 222, p = 0.97), or ABSITE percentile (44.6 vs 58, p = 0.33) compared to residents without burnout. Personal accomplishment was associated with ABSITE percentile scores (r = 0.35; p = 0.049). None of the 16 surgical milestone scores were significantly associated with burnout. Burnout is present in surgery residents and associated with emotional intelligence. There was no association of burnout with USMLE scores, ABSITE percentile, or surgical milestones. Traditional methods of assessing resident performance may not be capturing burnout and strategies to reduce burnout should consider targeting emotional intelligence. Published by Elsevier Inc.

Maximizing noise energy for noise-masking studies.

PubMed

Jules Étienne, Cédric; Arleo, Angelo; Allard, Rémy

2017-08-01

Noise-masking experiments are widely used to investigate visual functions. To be useful, noise generally needs to be strong enough to noticeably impair performance, but under some conditions, noise does not impair performance even when its contrast approaches the maximal displayable limit of 100 %. To extend the usefulness of noise-masking paradigms over a wider range of conditions, the present study developed a noise with great masking strength. There are two typical ways of increasing masking strength without exceeding the limited contrast range: use binary noise instead of Gaussian noise or filter out frequencies that are not relevant to the task (i.e., which can be removed without affecting performance). The present study combined these two approaches to further increase masking strength. We show that binarizing the noise after the filtering process substantially increases the energy at frequencies within the pass-band of the filter given equated total contrast ranges. A validation experiment showed that similar performances were obtained using binarized-filtered noise and filtered noise (given equated noise energy at the frequencies within the pass-band) suggesting that the binarization operation, which substantially reduced the contrast range, had no significant impact on performance. We conclude that binarized-filtered noise (and more generally, truncated-filtered noise) can substantially increase the energy of the noise at frequencies within the pass-band. Thus, given a limited contrast range, binarized-filtered noise can display higher energy levels than Gaussian noise and thereby widen the range of conditions over which noise-masking paradigms can be useful.

21 CFR 870.4280 - Cardiopulmonary prebypass filter.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Cardiopulmonary prebypass filter. 870.4280 Section... prebypass filter. (a) Identification. A cardiopulmonary prebypass filter is a device used during priming of... bypass. The device is not used to filter blood. (b) Classification. Class II (performance standards). ...

21 CFR 870.4280 - Cardiopulmonary prebypass filter.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Cardiopulmonary prebypass filter. 870.4280 Section... prebypass filter. (a) Identification. A cardiopulmonary prebypass filter is a device used during priming of... bypass. The device is not used to filter blood. (b) Classification. Class II (performance standards). ...

21 CFR 870.4280 - Cardiopulmonary prebypass filter.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Cardiopulmonary prebypass filter. 870.4280 Section... prebypass filter. (a) Identification. A cardiopulmonary prebypass filter is a device used during priming of... bypass. The device is not used to filter blood. (b) Classification. Class II (performance standards). ...

21 CFR 870.4280 - Cardiopulmonary prebypass filter.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary prebypass filter. 870.4280 Section... prebypass filter. (a) Identification. A cardiopulmonary prebypass filter is a device used during priming of... bypass. The device is not used to filter blood. (b) Classification. Class II (performance standards). ...

21 CFR 870.4280 - Cardiopulmonary prebypass filter.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Cardiopulmonary prebypass filter. 870.4280 Section... prebypass filter. (a) Identification. A cardiopulmonary prebypass filter is a device used during priming of... bypass. The device is not used to filter blood. (b) Classification. Class II (performance standards). ...

Application of a low cost ceramic filter to a membrane bioreactor for greywater treatment.

PubMed

Hasan, Md Mahmudul; Shafiquzzaman, Md; Nakajima, Jun; Ahmed, Abdel Kader T; Azam, Mohammad Shafiul

2015-03-01

The performance of a low cost and simple ceramic filter to a membrane bioreactor (MBR) process was evaluated for greywater treatment. The ceramic filter was submerged in an acrylic cylindrical column bioreactor. Synthetic greywater (prepared by shampoo, dish cleaner and laundry detergent) was fed continuously into the reactor. The filter effluent was obtained by gravitational pressure. The average flux performance was observed to be 11.5 LMH with an average hydraulic retention time of 1.7 days. Complete biodegradation of surfactant (methylene blue active substance removal: 99-100%) as well as high organic removal performance (biochemical oxygen demand: 97-100% and total organic carbon: >88%) was obtained. The consistency of flux (11.5 LMH) indicated that the filter can be operated for a long time without fouling. The application of this simple ceramic filter would make MBR technology cost-effective in developing countries for greywater reclamation and reuse.

Parasitic Effects of Grounding Paths on Common-Mode EMI Filter's Performance in Power Electronics Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Shuo; Maillet, Yoann; Wang, Fei

2010-01-01

High-frequency common-mode (CM) electromagnetic-interference (EMI) noise is difficult to suppress in electronics systems. EMI filters are used to suppress CM noise, but their performance is greatly affected by the parasitic effects of the grounding paths. In this paper, the parasitic effects of the grounding paths on an EMI filter's performance are investigated in a motor-drive system. The effects of the mutual inductance between two grounding paths are explored. Guidelines for the grounding of CM EMI filters are derived. Simulations and experiments are finally carried out to verify the theoretical analysis.

Adaptive filtering of GOCE-derived gravity gradients of the disturbing potential in the context of the space-wise approach

NASA Astrophysics Data System (ADS)

Piretzidis, Dimitrios; Sideris, Michael G.

2017-09-01

Filtering and signal processing techniques have been widely used in the processing of satellite gravity observations to reduce measurement noise and correlation errors. The parameters and types of filters used depend on the statistical and spectral properties of the signal under investigation. Filtering is usually applied in a non-real-time environment. The present work focuses on the implementation of an adaptive filtering technique to process satellite gravity gradiometry data for gravity field modeling. Adaptive filtering algorithms are commonly used in communication systems, noise and echo cancellation, and biomedical applications. Two independent studies have been performed to introduce adaptive signal processing techniques and test the performance of the least mean-squared (LMS) adaptive algorithm for filtering satellite measurements obtained by the gravity field and steady-state ocean circulation explorer (GOCE) mission. In the first study, a Monte Carlo simulation is performed in order to gain insights about the implementation of the LMS algorithm on data with spectral behavior close to that of real GOCE data. In the second study, the LMS algorithm is implemented on real GOCE data. Experiments are also performed to determine suitable filtering parameters. Only the four accurate components of the full GOCE gravity gradient tensor of the disturbing potential are used. The characteristics of the filtered gravity gradients are examined in the time and spectral domain. The obtained filtered GOCE gravity gradients show an agreement of 63-84 mEötvös (depending on the gravity gradient component), in terms of RMS error, when compared to the gravity gradients derived from the EGM2008 geopotential model. Spectral-domain analysis of the filtered gradients shows that the adaptive filters slightly suppress frequencies in the bandwidth of approximately 10-30 mHz. The limitations of the adaptive LMS algorithm are also discussed. The tested filtering algorithm can be connected to and employed in the first computational steps of the space-wise approach, where a time-wise Wiener filter is applied at the first stage of GOCE gravity gradient filtering. The results of this work can be extended to using other adaptive filtering algorithms, such as the recursive least-squares and recursive least-squares lattice filters.

Nuclear Cryogenic Propulsion Stage (NCPS) Fuel Element Testing in the Nuclear Thermal Rocket Element Environmental Simulator (NTREES)

NASA Technical Reports Server (NTRS)

Emrich, William J., Jr.

2017-01-01

To support the on-going nuclear thermal propulsion effort, a state-of-the-art non nuclear experimental test setup has been constructed to evaluate the performance characteristics of candidate fuel element materials and geometries in representative environments. The facility to perform this testing is referred to as the Nuclear Thermal Rocket Element Environment Simulator (NTREES). Last year NTREES was successfully used to satisfy a testing milestone for the Nuclear Cryogenic Propulsion Stage (NCPS) project and met or exceeded all required objectives.

ADEPT SR-1 Flight Experiment

NASA Technical Reports Server (NTRS)

Wercinski, Paul F.

2017-01-01

The ADEPT architecture represents a completely new approach for entry vehicle design using a high-performance carbon fabric to serve as the primary drag surface of the mechanically deployed decelerator and to protect the payload from hypersonic aerothermal heating during entry. The initial system-level development of the nano-ADEPT architecture will culminate in the launch of a 0.7-m deployed diameter ADEPT sounding rocket flight experiment. The SR-1 sounding rocket flight experiment is a critical milestone in the technology maturation plan for ADEPT and will generate performance data on in-space deployment and aerodynamic stability.

Interfacing VPSC with finite element codes. Demonstration of irradiation growth simulation in a cladding tube

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patra, Anirban; Tome, Carlos

This Milestone report shows good progress in interfacing VPSC with the FE codes ABAQUS and MOOSE, to perform component-level simulations of irradiation-induced deformation in Zirconium alloys. In this preliminary application, we have performed an irradiation growth simulation in the quarter geometry of a cladding tube. We have benchmarked VPSC-ABAQUS and VPSC-MOOSE predictions with VPSC-SA predictions to verify the accuracy of the VPSCFE interface. Predictions from the FE simulations are in general agreement with VPSC-SA simulations and also with experimental trends.

Quadratic correlation filters for optical correlators

NASA Astrophysics Data System (ADS)

Mahalanobis, Abhijit; Muise, Robert R.; Vijaya Kumar, Bhagavatula V. K.

2003-08-01

Linear correlation filters have been implemented in optical correlators and successfully used for a variety of applications. The output of an optical correlator is usually sensed using a square law device (such as a CCD array) which forces the output to be the squared magnitude of the desired correlation. It is however not a traditional practice to factor the effect of the square-law detector in the design of the linear correlation filters. In fact, the input-output relationship of an optical correlator is more accurately modeled as a quadratic operation than a linear operation. Quadratic correlation filters (QCFs) operate directly on the image data without the need for feature extraction or segmentation. In this sense, the QCFs retain the main advantages of conventional linear correlation filters while offering significant improvements in other respects. Not only is more processing required to detect peaks in the outputs of multiple linear filters, but choosing a winner among them is an error prone task. In contrast, all channels in a QCF work together to optimize the same performance metric and produce a combined output that leads to considerable simplification of the post-processing. In this paper, we propose a novel approach to the design of quadratic correlation based on the Fukunaga Koontz transform. Although quadratic filters are known to be optimum when the data is Gaussian, it is expected that they will perform as well as or better than linear filters in general. Preliminary performance results are provided that show that quadratic correlation filters perform better than their linear counterparts.

Optimizing of a high-order digital filter using PSO algorithm

NASA Astrophysics Data System (ADS)

Xu, Fuchun

2018-04-01

A self-adaptive high-order digital filter, which offers opportunity to simplify the process of tuning parameters and further improve the noise performance, is presented in this paper. The parameters of traditional digital filter are mainly tuned by complex calculation, whereas this paper presents a 5th order digital filter to obtain outstanding performance and the parameters of the proposed filter are optimized by swarm intelligent algorithm. Simulation results with respect to the proposed 5th order digital filter, SNR>122dB and the noise floor under -170dB are obtained in frequency range of [5-150Hz]. In further simulation, the robustness of the proposed 5th order digital is analyzed.

Attention and P300-based BCI performance in people with amyotrophic lateral sclerosis

PubMed Central

Riccio, Angela; Simione, Luca; Schettini, Francesca; Pizzimenti, Alessia; Inghilleri, Maurizio; Belardinelli, Marta Olivetti; Mattia, Donatella; Cincotti, Febo

2013-01-01

The purpose of this study was to investigate the support of attentional and memory processes in controlling a P300-based brain-computer interface (BCI) in people with amyotrophic lateral sclerosis (ALS). Eight people with ALS performed two behavioral tasks: (i) a rapid serial visual presentation (RSVP) task, screening the temporal filtering capacity and the speed of the update of the attentive filter, and (ii) a change detection task, screening the memory capacity and the spatial filtering capacity. The participants were also asked to perform a P300-based BCI spelling task. By using correlation and regression analyses, we found that only the temporal filtering capacity in the RSVP task was a predictor of both the P300-based BCI accuracy and of the amplitude of the P300 elicited performing the BCI task. We concluded that the ability to keep the attentional filter active during the selection of a target influences performance in BCI control. PMID:24282396

Pharmacy Students' Test-Taking Motivation-Effort on a Low-Stakes Standardized Test

PubMed Central

2011-01-01

Objective To measure third-year pharmacy students' level of motivation while completing the Pharmacy Curriculum Outcomes Assessment (PCOA) administered as a low-stakes test to better understand use of the PCOA as a measure of student content knowledge. Methods Student motivation was manipulated through an incentive (ie, personal letter from the dean) and a process of statistical motivation filtering. Data were analyzed to determine any differences between the experimental and control groups in PCOA test performance, motivation to perform well, and test performance after filtering for low motivation-effort. Results Incentivizing students diminished the need for filtering PCOA scores for low effort. Where filtering was used, performance scores improved, providing a more realistic measure of aggregate student performance. Conclusions To ensure that PCOA scores are an accurate reflection of student knowledge, incentivizing and/or filtering for low motivation-effort among pharmacy students should be considered fundamental best practice when the PCOA is administered as a low-stakes test PMID:21655395

Contamination control through filtration of microorganisms

NASA Technical Reports Server (NTRS)

Stabekis, P. D.; Lyle, R. G.

1972-01-01

A description is given of the various kinds of gas and liquid filters used in decontamination and sterilization procedures. Also discussed are filtration mechanisms, characteristics of filter materials, and the factors affecting filter performance. Summaries are included for filter testing and evaluation techniques and the possible application of the filters to spacecraft sterilization.

An Optically Implemented Kalman Filter Algorithm.

DTIC Science & Technology

1983-12-01

8b. OFFICE SYMOOL 9. PROCUREMENT INSTRUMENT IDENTIFICATION NUMBER 8c. ADDRESS (City, State and ZIP Code ) 10. SOURCE OF FUNDING NOS.______ PROGRAM...are completely speci- fied for the correlation stage to perform the required corre- lation in real time, and the filter stage to perform the lin- ear...performance analy- ses indicated an enhanced ability of the nonadaptive filter to track a realistic distant point source target with an error standard

Selection vector filter framework

NASA Astrophysics Data System (ADS)

Lukac, Rastislav; Plataniotis, Konstantinos N.; Smolka, Bogdan; Venetsanopoulos, Anastasios N.

2003-10-01

We provide a unified framework of nonlinear vector techniques outputting the lowest ranked vector. The proposed framework constitutes a generalized filter class for multichannel signal processing. A new class of nonlinear selection filters are based on the robust order-statistic theory and the minimization of the weighted distance function to other input samples. The proposed method can be designed to perform a variety of filtering operations including previously developed filtering techniques such as vector median, basic vector directional filter, directional distance filter, weighted vector median filters and weighted directional filters. A wide range of filtering operations is guaranteed by the filter structure with two independent weight vectors for angular and distance domains of the vector space. In order to adapt the filter parameters to varying signal and noise statistics, we provide also the generalized optimization algorithms taking the advantage of the weighted median filters and the relationship between standard median filter and vector median filter. Thus, we can deal with both statistical and deterministic aspects of the filter design process. It will be shown that the proposed method holds the required properties such as the capability of modelling the underlying system in the application at hand, the robustness with respect to errors in the model of underlying system, the availability of the training procedure and finally, the simplicity of filter representation, analysis, design and implementation. Simulation studies also indicate that the new filters are computationally attractive and have excellent performance in environments corrupted by bit errors and impulsive noise.

Wet particle source identification and reduction using a new filter cleaning process

NASA Astrophysics Data System (ADS)

Umeda, Toru; Morita, Akihiko; Shimizu, Hideki; Tsuzuki, Shuichi

2014-03-01

Wet particle reduction during filter installation and start-up aligns closely with initiatives to reduce both chemical consumption and preventative maintenance time. The present study focuses on the effects of filter materials cleanliness on wet particle defectivity through evaluation of filters that have been treated with a new enhanced cleaning process focused on organic compounds reduction. Little difference in filter performance is observed between the two filter types at a size detection threshold of 60 nm, while clear differences are observed at that of 26 nm. It can be suggested that organic compounds can be identified as a potential source of wet particles. Pall recommends filters that have been treated with the special cleaning process for applications with a critical defect size of less than 60 nm. Standard filter products are capable to satisfy wet particle defect performance criteria in less critical lithography applications.

Adaptive iterated function systems filter for images highly corrupted with fixed - Value impulse noise

NASA Astrophysics Data System (ADS)

Shanmugavadivu, P.; Eliahim Jeevaraj, P. S.

2014-06-01

The Adaptive Iterated Functions Systems (AIFS) Filter presented in this paper has an outstanding potential to attenuate the fixed-value impulse noise in images. This filter has two distinct phases namely noise detection and noise correction which uses Measure of Statistics and Iterated Function Systems (IFS) respectively. The performance of AIFS filter is assessed by three metrics namely, Peak Signal-to-Noise Ratio (PSNR), Mean Structural Similarity Index Matrix (MSSIM) and Human Visual Perception (HVP). The quantitative measures PSNR and MSSIM endorse the merit of this filter in terms of degree of noise suppression and details/edge preservation respectively, in comparison with the high performing filters reported in the recent literature. The qualitative measure HVP confirms the noise suppression ability of the devised filter. This computationally simple noise filter broadly finds application wherein the images are highly degraded by fixed-value impulse noise.

Toward Directly-Deposited Optical Blocking Filters for High-performance, Back-illuminated Imaging X-ray Detectors

NASA Astrophysics Data System (ADS)

Bautz, Mark W.; Kissel, S. E.; Ryu, K.; Suntharalingam, V.

2014-01-01

Silicon X-ray detectors require optical blocking filters to prevent out-of-band (UV, visible and near-IR) radiation from corrupting the X-ray signal. Traditionally, blocking filters have been deposited on thin, free-standing membranes suspended over the detector. Free-standing filters are fragile, however, and in past instruments have required heavy and complex vacuum housings to protect them from acoustic loads during ground operations and launch. A directly-deposited blocking filter greatly simplifies the instrument and in principle permits better soft X-ray detection efficiency than a traditional free-standing filter. Directly-deposited filters have flown in previous generation instruments (e.g. the XMM/Newton Reflection Grating Spectrometer) but none has yet been demonstrated on a modern, high-performance back-illuminated X-ray CCD. We report here on the status of our NASA-funded Strategic Astrophysics Technology program to demonstrate such filters.

Simpler Alternative to an Optimum FQPSK-B Viterbi Receiver

NASA Technical Reports Server (NTRS)

Lee, Dennis; Simon, Marvin; Yan, Tsun-Yee

2003-01-01

A reduced-complexity alternative to an optimum FQPSK-B Viterbi receiver has been invented. As described, the reduction in complexity is achieved at the cost of only a small reduction in power performance [performance expressed in terms of a bit-energy-to-noise-energy ratio (Eb/N0) for a given bit-error rate (BER)]. The term "FQPSK-B" denotes a baseband-filtered version of Feher quadrature-phase-shift keying, which is a patented, bandwidth-efficient phase-modulation scheme named after its inventor. Heretofore, commercial FQPSK-B receivers have performed symbol-by-symbol detection, in each case using a detection filter (either the proprietary FQPSK-B filter for better BER performance, or a simple integrate-and-dump filter with degraded performance) and a sample-and-hold circuit.

Characterization Tests of WFC3 Filters

NASA Technical Reports Server (NTRS)

Baggett, S.; Boucarut, R.; Telfer, R.; Quijano, J. Kim; Quijada, M.; Arsenovic, P.; Brown, T.; Dailey, M.; Figer, D.; Hilbert, B.

2006-01-01

The WFC3 instrument to be installed on HST during the next servicing mission consists of a UVIS and an IR channel. Each channel is allocated its own complement of filters: 48 elements for the UVIS (42 filters, 5 quads, and 1 UV grism) and 17 slots for the IR (15 filters and 2 grisms). While a majority of the UVIS filters exhibit excellent performance consistent with or exceeding expectations, a subset show significant filter ghosts. Procurement of improved replacement filters is in progress and a summary of the characterization tests being performed on the new filters is presented. In the IR channel, while no filter ghosting was detected in any of the filters during thermal vacuum testing, the grisms were found to be installed incorrectly; they have been removed and will be reinstalled. In addition, due to the significantly improved response blueward of 800nm expected in the new substrate-removed IR detector (see Invited talk by R.A.Kimble, this volume), two IR filters originally constructed on a fused silica substrate are being remade using an IR transmitting color glass to block any visible light transmission. Tests of the new IR filters and preparations for the grism reinstallation are summarized

High emission reduction performance of a novel organic-inorganic composite filters containing sepiolite mineral nanofibers

PubMed Central

Wang, Fei; Zhang, Hui; Liang, Jinsheng; Tang, Qingguo; Li, Yanxia; Shang, Zengyao

2017-01-01

In this work, a new organic-inorganic composite filter was prepared. The thickness, pore size, air permeability, bursting strength and microstructure were characterized systematically, proving that coatings had regulatory effect on filters physical properties. Benefitting from the distinct coatings containing 5% sepiolite nanofibers after five times dilution, the physical properties of corresponding air filter exhibits the most favorable performance and meet the standard of air filter. When used as fuel filter, it satisfies the fuel filter standard and achieves the best performance after six times dilution. The contrast test on engine emission was taken based on auto filters coated with/without as prepared nanofibers. An obvious decrease in the emission of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) can be observed after installation of composite filter on vehicles. Under the high idle condition, gasoline engine emission decreased by 8.13%, 11.35% and 44.91% for CO, HC and NOx, respectively. When tested in the low idle condition, engine emission reduced by 0.43%, 1.14% and 85.67% for CO, HC and NOx, respectively. The diesel engine emissions of CO, NOx and total amount of HC and NOx decreased by 32.26%, 3.28% and 4.66%, respectively. The results illustrate the composite installation exhibits satisfactory emission reduction effect. PMID:28252034

High emission reduction performance of a novel organic-inorganic composite filters containing sepiolite mineral nanofibers

NASA Astrophysics Data System (ADS)

Wang, Fei; Zhang, Hui; Liang, Jinsheng; Tang, Qingguo; Li, Yanxia; Shang, Zengyao

2017-03-01

In this work, a new organic-inorganic composite filter was prepared. The thickness, pore size, air permeability, bursting strength and microstructure were characterized systematically, proving that coatings had regulatory effect on filters physical properties. Benefitting from the distinct coatings containing 5% sepiolite nanofibers after five times dilution, the physical properties of corresponding air filter exhibits the most favorable performance and meet the standard of air filter. When used as fuel filter, it satisfies the fuel filter standard and achieves the best performance after six times dilution. The contrast test on engine emission was taken based on auto filters coated with/without as prepared nanofibers. An obvious decrease in the emission of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) can be observed after installation of composite filter on vehicles. Under the high idle condition, gasoline engine emission decreased by 8.13%, 11.35% and 44.91% for CO, HC and NOx, respectively. When tested in the low idle condition, engine emission reduced by 0.43%, 1.14% and 85.67% for CO, HC and NOx, respectively. The diesel engine emissions of CO, NOx and total amount of HC and NOx decreased by 32.26%, 3.28% and 4.66%, respectively. The results illustrate the composite installation exhibits satisfactory emission reduction effect.

United States Air Force Summer Faculty Research Program (1983). Technical Report. Volume 2

DTIC Science & Technology

1983-12-01

filters are given below: (1) Inverse filter - Based on the model given in Eq. (2) and the criterion of minimizing the norm (i.e., power ) of the...and compared based on their performances In machine classification under a variety of blur and noise conditions. These filters are analyzed to...criteria based on various assumptions of the Image models* In practice filter performance varies with the type of image, the blur and the noise conditions

Least squares restoration of multi-channel images

NASA Technical Reports Server (NTRS)

Chin, Roland T.; Galatsanos, Nikolas P.

1989-01-01

In this paper, a least squares filter for the restoration of multichannel imagery is presented. The restoration filter is based on a linear, space-invariant imaging model and makes use of an iterative matrix inversion algorithm. The restoration utilizes both within-channel (spatial) and cross-channel information as constraints. Experiments using color images (three-channel imagery with red, green, and blue components) were performed to evaluate the filter's performance and to compare it with other monochrome and multichannel filters.

A prefilter for mitigating PH 3 contamination of a Ni-YSZ anode

NASA Astrophysics Data System (ADS)

Xu, Chunchuan; Zondlo, John W.; Sabolsky, Edward M.

Ni-YSZ is used as the anode of a solid oxide fuel cell (SOFC) because it has excellent electrochemical performance for operation with coal-derived syngas. However, trace impurities, PH 3 H 2S AsH 3, and Sb in coal-syngas can cause SOFC degradation. Described here is a means of removing PH 3 impurity from syngas by using a Ni-based prefilter. In one test, a thin Ni-based filter was set upstream of a Ni-YSZ anode-supported SOFC. The SOFC was exposed to syngas with PH 3 under a constant current load at 800 °C. The filter decreased 20 ppm PH 3 in the feed to a level which did not degrade the SOFC for over 400 h until the filter became saturated. In another test, both H 2S and PH 3 were co-fed to the cell with Ni-based and Fe/Ni-based filters. The interaction between these two impurities did not significantly impact the filter performance with respect to PH 3 removal for both filter formulations. The cell performance was evaluated by current-voltage measurements and impedance spectroscopy. Post-mortem analyses of the cell and filter were performed by means of XRD, SEM/EDS and XPS. With proper filter design, the Ni-YSZ SOFC can operate on contaminated coal-syngas without degradation over a prescribed period of time.

Optical Navigation Simulation and Performance Analysis for Osiris-Rex Proximity Operations

NASA Technical Reports Server (NTRS)

Jackman, Coralie D.; Nelson, Derek S.; Mccarthy, Leilah K.; Liounis, Andrew J.; Leonard, Jason M.; Antreasian, Peter G.; Getzandanner, Kenneth M.; Moreau, Michael C.

2017-01-01

The OSIRIS-REx mission timeline with OpNav milestones is presented in Figure 1. The first three proximity operations (ProxOps) mission phases focus on Navigation. During these phases, OSIRIS-REx approaches Bennu, conducts equatorial and polar flybys in Preliminary Survey, and inserts into the first mission orbit: Orbit A. During these phases, the OpNav techniques evolve from point-source to resolved-body centroiding to landmark tracking.

Development of New Therapeutics Targeting Biofilm Formation by the Opportunistic Pulmonary Pathogens Pseudomonas aeruginosa and Aspergillus Fumigatus

DTIC Science & Technology

2017-10-01

antibacterial activity . The unexpected departure of PDF Perrin Baker in early June 2017 and the delay in recruiting his...characterize the ability of recombinant GH enzymes to enhance the activity of antimicrobial agents against PA and AF in vitro (2) Perform...major goals of the project as stated in the approved SOW. If the application listed milestones/target dates for important activities

Battery Ownership Model - Medium Duty HEV Battery Leasing & Standardization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, Ken; Smith, Kandler; Cosgrove, Jon

2015-12-01

Prepared for the U.S. Department of Energy, this milestone report focuses on the economics of leasing versus owning batteries for medium-duty hybrid electric vehicles as well as various battery standardization scenarios. The work described in this report was performed by members of the Energy Storage Team and the Vehicle Simulation Team in NREL's Transportation and Hydrogen Systems Center along with members of the Vehicles Analysis Team at Ricardo.

Structures and Dynamics Division: Research and technology plans for FY 1983 and accomplishments for FY 1982

NASA Technical Reports Server (NTRS)

Bales, K. S.

1983-01-01

The objectives, expected results, approach, and milestones for research projects of the IPAD Project Office and the impact dynamics, structural mechanics, and structural dynamics branches of the Structures and Dynamics Division are presented. Research facilities are described. Topics covered include computer aided design; general aviation/transport crash dynamics; aircraft ground performance; composite structures; failure analysis, space vehicle dynamics; and large space structures.

CYANOBACTERIA PASSAGE THROUGH DRINKING WATER FILTERS DURING PERTURBATION EPISODES AS A FUNCTION OF CELL MORPHOLOGY, COAGULANT AND INITIAL FILTER LOADING RATE

EPA Science Inventory

Eight pilot-scale in-line filtration trials were performed to evaluate the passage of cyanobacterial cells through drinking water filters after sudden increases in hydraulic loading rates. Trials were performed at 30 degrees C using two coagulant combinations (aluminum sulfate a...

Non-uniform cosine modulated filter banks using meta-heuristic algorithms in CSD space.

PubMed

Kalathil, Shaeen; Elias, Elizabeth

2015-11-01

This paper presents an efficient design of non-uniform cosine modulated filter banks (CMFB) using canonic signed digit (CSD) coefficients. CMFB has got an easy and efficient design approach. Non-uniform decomposition can be easily obtained by merging the appropriate filters of a uniform filter bank. Only the prototype filter needs to be designed and optimized. In this paper, the prototype filter is designed using window method, weighted Chebyshev approximation and weighted constrained least square approximation. The coefficients are quantized into CSD, using a look-up-table. The finite precision CSD rounding, deteriorates the filter bank performances. The performances of the filter bank are improved using suitably modified meta-heuristic algorithms. The different meta-heuristic algorithms which are modified and used in this paper are Artificial Bee Colony algorithm, Gravitational Search algorithm, Harmony Search algorithm and Genetic algorithm and they result in filter banks with less implementation complexity, power consumption and area requirements when compared with those of the conventional continuous coefficient non-uniform CMFB.

Non-uniform cosine modulated filter banks using meta-heuristic algorithms in CSD space

PubMed Central

Kalathil, Shaeen; Elias, Elizabeth

2014-01-01

This paper presents an efficient design of non-uniform cosine modulated filter banks (CMFB) using canonic signed digit (CSD) coefficients. CMFB has got an easy and efficient design approach. Non-uniform decomposition can be easily obtained by merging the appropriate filters of a uniform filter bank. Only the prototype filter needs to be designed and optimized. In this paper, the prototype filter is designed using window method, weighted Chebyshev approximation and weighted constrained least square approximation. The coefficients are quantized into CSD, using a look-up-table. The finite precision CSD rounding, deteriorates the filter bank performances. The performances of the filter bank are improved using suitably modified meta-heuristic algorithms. The different meta-heuristic algorithms which are modified and used in this paper are Artificial Bee Colony algorithm, Gravitational Search algorithm, Harmony Search algorithm and Genetic algorithm and they result in filter banks with less implementation complexity, power consumption and area requirements when compared with those of the conventional continuous coefficient non-uniform CMFB. PMID:26644921

Silica dust exposure: Effect of filter size to compliance determination

NASA Astrophysics Data System (ADS)

Amran, Suhaily; Latif, Mohd Talib; Khan, Md Firoz; Leman, Abdul Mutalib; Goh, Eric; Jaafar, Shoffian Amin

2016-11-01

Monitoring of respirable dust was performed using a set of integrated sampling system consisting of sampling pump attached with filter media and separating device such as cyclone or special cassette. Based on selected method, filter sizes are either 25 mm or 37 mm poly vinyl chloride (PVC) filter. The aim of this study was to compare performance of two types of filter during personal respirable dust sampling for silica dust under field condition. The comparison strategy focused on the final compliance judgment based on both dataset. Eight hour parallel sampling of personal respirable dust exposure was performed among 30 crusher operators at six quarries. Each crusher operator was attached with parallel set of integrated sampling train containing either 25 mm or 37 mm PVC filter. Each set consisted of standard flow SKC sampler, attached with SKC GS3 cyclone and 2 pieces cassette loaded with 5.0 µm of PVC filter. Samples were analyzed by gravimetric technique. Personal respirable dust exposure between the two types of filters indicated significant positive correlation (p < 0.05) with moderate relationship (r2 = 0.6431). Personal exposure based on 25 mm PVC filter indicated 0.1% non-compliance to overall data while 37 mm PVC filter indicated similar findings at 0.4 %. Both data showed similar arithmetic mean(AM) and geometric mean(GM). In overall we concluded that personal respirable dust exposure either based on 25mm or 37mm PVC filter will give similar compliance determination. Both filters are reliable to be used in respirable dust monitoring for silica dust related exposure.

Dialysis search filters for PubMed, Ovid MEDLINE, and Embase databases.

PubMed

Iansavichus, Arthur V; Haynes, R Brian; Lee, Christopher W C; Wilczynski, Nancy L; McKibbon, Ann; Shariff, Salimah Z; Blake, Peter G; Lindsay, Robert M; Garg, Amit X

2012-10-01

Physicians frequently search bibliographic databases, such as MEDLINE via PubMed, for best evidence for patient care. The objective of this study was to develop and test search filters to help physicians efficiently retrieve literature related to dialysis (hemodialysis or peritoneal dialysis) from all other articles indexed in PubMed, Ovid MEDLINE, and Embase. A diagnostic test assessment framework was used to develop and test robust dialysis filters. The reference standard was a manual review of the full texts of 22,992 articles from 39 journals to determine whether each article contained dialysis information. Next, 1,623,728 unique search filters were developed, and their ability to retrieve relevant articles was evaluated. The high-performance dialysis filters consisted of up to 65 search terms in combination. These terms included the words "dialy" (truncated), "uremic," "catheters," and "renal transplant wait list." These filters reached peak sensitivities of 98.6% and specificities of 98.5%. The filters' performance remained robust in an independent validation subset of articles. These empirically derived and validated high-performance search filters should enable physicians to effectively retrieve dialysis information from PubMed, Ovid MEDLINE, and Embase.

Social Development and Feeding Milestones of Young Down Syndrome Children.

ERIC Educational Resources Information Center

And Others; Cullen, Susan M.

1981-01-01

The data revealed that young Down syndrome children attained significantly higher scores on the Vineland Social Maturity Scale and achieved most feeding milestones much earlier if they had no or only mild congenital heart disease, if their parents followed through appropriately with furnished guidance, and if they had "good" muscle tone. (Author)

Final Review of FY17 ASC CSSE L2 Milestone #6018 entitled "Analyzing Power Usage Characteristics of Workloads Running on Trinity".

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoekstra, Robert J.; Hammond, Simon David; Hemmert, Karl Scott

The presentation documented the technical approach of the team and summary of the results with sufficient detail to demonstrate both the value and the completion of the milestone. A separate SAND report was also generated with more detail to supplement the presentation.

First Steps for Early Success: State Strategies to Support Developmental Screening in Early Childhood Settings

ERIC Educational Resources Information Center

Johnson-Staub, Christine

2014-01-01

Young children's development occurs along a continuum, with milestones reached at ages that vary within an accepted timeframe. Milestones not met within the expected timeframe can raise concerns about developmental delays, health conditions, or other factors contributing negatively to the child's growth and learning. Monitoring children's…

43 CFR 3930.30 - Diligent development milestones.

Code of Federal Regulations, 2011 CFR

2011-10-01

... any particular year starting in the 10th lease year. Payments in lieu of production in year 10 of the... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Diligent development milestones. 3930.30... 2 years of the lease issuance date, submit to the proper BLM office an initial POD that meets the...

From Early to Current Developments in Online Learning at Nova Southeastern University: Reflections on Historical Milestones.

ERIC Educational Resources Information Center

Dringus, Laurie P.; Scigliano, John A.

2000-01-01

Traces the major historical milestones achieved by Nova Southeastern University in its pioneering of graduate level online learning programs. Highlights include delivery systems; Web-based electronic classrooms; overview of the technology, including telecommunications through UNIX; evaluation and research; and technology used in the School of…

Apparatus as Milestones in the History of Comparative Psychology

NASA Technical Reports Server (NTRS)

Washburn, David A.; Rumbaugh, Duane M.; Putney, R. Thompson

1994-01-01

Significant apparatus developments from the history of comparative psychology are reviewed, including the contemporary trend toward computer use in research with nonhuman animals. It is argued that milestone apparatus served not only to open new lines of inquiry but also to shape or delimit the nature of the answers that were obtained.

Astronomy Education Milestone in Hermanus

NASA Astrophysics Data System (ADS)

de Villiers, Pierre

2010-12-01

A milestone in astronomy awareness and education in South Africa was achieved during October when Hermanus Centre members, together with science teachers and learners from Hermanus High and Qhayiya Secondary School, saw "first light" on the 1,2m MONET North telescope at the McDonald Observatory, Texas via the internet from the Hermanus High School's computer room.

78 FR 64212 - Information Collections Being Reviewed by the Federal Communications Commission; Comments Requested

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-28

... Investment Annual Milestone Reports; Changes in Phase I Deployments; and Connect America Phase II State-Level... information to the Commission. However, respondents may request materials or information submitted to the... approval is sought are the Geocoded Information for Phase I Two- and Three-Year Milestone Reports...

1999 Report on Hanford Site land disposal restriction for mixed waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

BLACK, D.G.

This report was submitted to meet the requirements of Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-26-011. This milestone requires the preparation of an annual report that covers characterization, treatment, storage, minimization, and other aspects of managing land-disposal-restricted mixed waste at the Hanford Facility.

20 CFR 411.545 - How are the outcome payments calculated under the outcome-milestone payment system?

Code of Federal Regulations, 2010 CFR

2010-04-01

... the outcome-milestone payment system? 411.545 Section 411.545 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.545 How... of the Social Security Act for all beneficiaries for months during the preceding calendar year; and...

20 CFR 411.545 - How are the outcome payments calculated under the outcome-milestone payment system?

Code of Federal Regulations, 2012 CFR

2012-04-01

... the outcome-milestone payment system? 411.545 Section 411.545 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.545 How... of the Social Security Act for all beneficiaries for months during the preceding calendar year; and...

20 CFR 411.545 - How are the outcome payments calculated under the outcome-milestone payment system?

Code of Federal Regulations, 2011 CFR

2011-04-01

... the outcome-milestone payment system? 411.545 Section 411.545 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.545 How... of the Social Security Act for all beneficiaries for months during the preceding calendar year; and...

20 CFR 411.545 - How are the outcome payments calculated under the outcome-milestone payment system?

Code of Federal Regulations, 2013 CFR

2013-04-01

... the outcome-milestone payment system? 411.545 Section 411.545 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.545 How... of the Social Security Act for all beneficiaries for months during the preceding calendar year; and...

20 CFR 411.545 - How are the outcome payments calculated under the outcome-milestone payment system?

Code of Federal Regulations, 2014 CFR

2014-04-01

... the outcome-milestone payment system? 411.545 Section 411.545 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.545 How... of the Social Security Act for all beneficiaries for months during the preceding calendar year; and...

Use of a Clinical Pathologic Conference to Demonstrate Residents' ACGME Emergency Medicine Milestones, Aid in Faculty Development, and Increase Academic Output.

PubMed

Kane, Kathleen; Weaver, Kevin; Barr, Gavin; Quinn, Shawn; Goyke, Terrence; Smith, Amy; Yenser, Dawn; Kane, Bryan

2018-06-01

The Emergency Medicine Milestones Project, developed by the Accreditation Council for Graduate Medical Education (ACGME) and the American Board of Emergency Medicine, includes competence targets for residents to attain and, ultimately, to exceed American Osteopathic Association and ACGME expectations for residents. The authors sought to use the clinical pathologic conference (CPC) format in their institutions' Emergency Medicine Milestones Project to provide measurable residency academic and faculty development outcomes. The CPC is an event in which a resident presents an unknown case to a discussant in advance of a didactic session to demonstrate an organized approach and decision-making rationale to a differential diagnosis. Feedback forms included the assessment of resident discussants from the perspective of level-5 Milestone achievements in particular. Developing an internal CPC competition with a dedicated core faculty coordinator who provides skill development for both resident and faculty presentation has proven successful. Such a competition can document the level-5 achievements for senior residents, be a source of faculty development, and increase peer-reviewed academic output.

Effect of Selectively Etched Ferroelectric Thin-Film Layer on the Performance of a Tunable Bandpass Filter

NASA Technical Reports Server (NTRS)

Subramanyam, Guru; Vignesparamoorthy, Sivaruban; Mueller, Carl; VanKeuls, Fred; Warner, Joseph; Miranda, Felix A.

2001-01-01

The main purpose of this work is to study the effect of a selectively etched ferroelectric thin film layer on the performance of an electrically tunable filter. An X-band tunable filter was designed, fabricated and tested on a selectively etched Barium Strontium Titanate (BSTO) ferroelectric thin film layer. Tunable filters with varying lengths of BSTO thin-film in the input and output coupling gaps were modeled, as well as experimentally tested. Experimental results showed that filters with coupling gaps partially filled with BSTO maintained frequency tunability and improved the insertion loss by approx. 2dB. To the best of our knowledge, these results represent the first experimental demonstration of the advantages of selective etching in the performance of thin film ferroelectric-based tunable microwave components.

Performance Evaluation of Two Different Industrial Foam Filters with LiMCA II Data

NASA Astrophysics Data System (ADS)

Syvertsen, Martin; Bao, Sarina

2015-04-01

Plant-scale filtration experiments with molten aluminum have been carried out with two different types of 10 × 10 × 2 in, 30 ppi ceramic foam filters. The filters were produced in the same production line where the only difference was the composition of the ceramic slurry used for the filter production. The inclusion contents in the aluminum melt before and after the filters were measured with two constantly running liquid metal cleanliness analyzer (LiMCA) II units. Three methods for analyzing the recorded data are presented. A significant difference in the filtration performance as function of time was found when settling of inclusions in the melt was taken into account. Statistical treatment of the time dependent LiMCA II data was performed.

Applications of charge-coupled device transversal filters to communication

NASA Technical Reports Server (NTRS)

Buss, D. D.; Bailey, W. H.; Brodersen, R. W.; Hewes, C. R.; Tasch, A. F., Jr.

1975-01-01

The paper discusses the computational power of state-of-the-art charged-coupled device (CCD) transversal filters in communications applications. Some of the performance limitations of CCD transversal filters are discussed, with attention given to time delay and bandwidth, imperfect charge transfer efficiency, weighting coefficient error, noise, and linearity. The application of CCD transversal filters to matched filtering, spectral filtering, and Fourier analysis is examined. Techniques for making programmable transversal filters are briefly outlined.

Blue-Light Filtering Spectacle Lenses: Optical and Clinical Performances.

PubMed

Leung, Tsz Wing; Li, Roger Wing-Hong; Kee, Chea-Su

2017-01-01

To evaluate the optical performance of blue-light filtering spectacle lenses and investigate whether a reduction in blue light transmission affects visual performance and sleep quality. Experiment 1: The relative changes in phototoxicity, scotopic sensitivity, and melatonin suppression of five blue-light filtering plano spectacle lenses were calculated based on their spectral transmittances measured by a spectrophotometer. Experiment 2: A pseudo-randomized controlled study was conducted to evaluate the clinical performance of two blue-light filtering spectacle lenses (BF: blue-filtering anti-reflection coating; BT: brown-tinted) with a regular clear lens (AR) serving as a control. A total of eighty computer users were recruited from two age cohorts (young adults: 18-30 yrs, middle-aged adults: 40-55 yrs). Contrast sensitivity under standard and glare conditions, and colour discrimination were measured using standard clinical tests. After one month of lens wear, subjective ratings of lens performance were collected by questionnaire. All tested blue-light filtering spectacle lenses theoretically reduced the calculated phototoxicity by 10.6% to 23.6%. Although use of the blue-light filters also decreased scotopic sensitivity by 2.4% to 9.6%, and melatonin suppression by 5.8% to 15.0%, over 70% of the participants could not detect these optical changes. Our clinical tests revealed no significant decrease in contrast sensitivity either with (95% confidence intervals [CI]: AR-BT [-0.05, 0.05]; AR-BF [-0.05, 0.06]; BT-BF [-0.06, 0.06]) or without glare (95% CI: AR-BT [-0.01, 0.03]; AR-BF [-0.01, 0.03]; BT-BF [-0.02, 0.02]) and colour discrimination (95% CI: AR-BT [-9.07, 1.02]; AR-BF [-7.06, 4.46]; BT-BF [-3.12, 8.57]). Blue-light filtering spectacle lenses can partially filter high-energy short-wavelength light without substantially degrading visual performance and sleep quality. These lenses may serve as a supplementary option for protecting the retina from potential blue-light hazard. ClinicalTrials.gov NCT02821403.

Learnings From the Pilot Implementation of Mobile Medical Milestones Application.

PubMed

Page, Cristen P; Reid, Alfred; Coe, Catherine L; Carlough, Martha; Rosenbaum, Daryl; Beste, Janalynn; Fagan, Blake; Steinbacher, Erika; Jones, Geoffrey; Newton, Warren P

2016-10-01

Implementation of the educational milestones benefits from mobile technology that facilitates ready assessments in the clinical environment. We developed a point-of-care resident evaluation tool, the Mobile Medical Milestones Application (M3App), and piloted it in 8 North Carolina family medicine residency programs. We sought to examine variations we found in the use of the tool across programs and explored the experiences of program directors, faculty, and residents to better understand the perceived benefits and challenges of implementing the new tool. Residents and faculty completed presurveys and postsurveys about the tool and the evaluation process in their program. Program directors were interviewed individually. Interviews and open-ended survey responses were analyzed and coded using the constant comparative method, and responses were tabulated under themes. Common perceptions included increased data collection, enhanced efficiency, and increased perceived quality of the information gathered with the M3App. Residents appreciated the timely, high-quality feedback they received. Faculty reported becoming more comfortable with the tool over time, and a more favorable evaluation of the tool was associated with higher utilization. Program directors reported improvements in faculty knowledge of the milestones and resident satisfaction with feedback. Faculty and residents credited the M3App with improving the quality and efficiency of resident feedback. Residents appreciated the frequency, proximity, and specificity of feedback, and faculty reported the app improved their familiarity with the milestones. Implementation challenges included lack of a physician champion and competing demands on faculty time.

Childhood growth and development associated with need for full-time special education at school age.

PubMed

Mannerkoski, Minna; Aberg, Laura; Hoikkala, Marianne; Sarna, Seppo; Kaski, Markus; Autti, Taina; Heiskala, Hannu

2009-01-01

To explore how growth measurements and attainment of developmental milestones in early childhood reflect the need for full-time special education (SE). After stratification in this population-based study, 900 pupils in full-time SE groups (age-range 7-16 years, mean 12 years 8 months) at three levels and 301 pupils in mainstream education (age-range 7-16, mean 12 years 9 months) provided data on height and weight from birth to age 7 years and head circumference to age 1 year. Developmental screening was evaluated from age 1 month to 48 months. Statistical methods included a general linear model (growth measurements), binary logistic regression analysis (odds ratios for growth), and multinomial logistic regression analysis (odds ratios for developmental milestones). At 1 year, a 1 standard deviation score (SDS) decrease in height raised the probability of SE placement by 40%, and a 1 SDS decrease in head size by 28%. In developmental screening, during the first months of life the gross motor milestones, especially head support, differentiated the children at levels 0-3. Thereafter, the fine motor milestones and those related to speech and social skills became more important. Children whose growth is mildly impaired, though in the normal range, and who fail to attain certain developmental milestones have an increased probability for SE and thus a need for special attention when toddlers age. Similar to the growth curves, these children seem to have consistent developmental curves (patterns).

Symmetric Phase Only Filtering for Improved DPIV Data Processing

NASA Technical Reports Server (NTRS)

Wernet, Mark P.

2006-01-01

The standard approach in Digital Particle Image Velocimetry (DPIV) data processing is to use Fast Fourier Transforms to obtain the cross-correlation of two single exposure subregions, where the location of the cross-correlation peak is representative of the most probable particle displacement across the subregion. This standard DPIV processing technique is analogous to Matched Spatial Filtering, a technique commonly used in optical correlators to perform the crosscorrelation operation. Phase only filtering is a well known variation of Matched Spatial Filtering, which when used to process DPIV image data yields correlation peaks which are narrower and up to an order of magnitude larger than those obtained using traditional DPIV processing. In addition to possessing desirable correlation plane features, phase only filters also provide superior performance in the presence of DC noise in the correlation subregion. When DPIV image subregions contaminated with surface flare light or high background noise levels are processed using phase only filters, the correlation peak pertaining only to the particle displacement is readily detected above any signal stemming from the DC objects. Tedious image masking or background image subtraction are not required. Both theoretical and experimental analyses of the signal-to-noise ratio performance of the filter functions are presented. In addition, a new Symmetric Phase Only Filtering (SPOF) technique, which is a variation on the traditional phase only filtering technique, is described and demonstrated. The SPOF technique exceeds the performance of the traditionally accepted phase only filtering techniques and is easily implemented in standard DPIV FFT based correlation processing with no significant computational performance penalty. An "Automatic" SPOF algorithm is presented which determines when the SPOF is able to provide better signal to noise results than traditional PIV processing. The SPOF based optical correlation processing approach is presented as a new paradigm for more robust cross-correlation processing of low signal-to-noise ratio DPIV image data."

A Transformerless Hybrid Active Filter Capable of Complying with Harmonic Guidelines for Medium-Voltage Motor Drives

NASA Astrophysics Data System (ADS)

Kondo, Ryota; Akagi, Hirofumi

This paper presents a transformerless hybrid active filter that is integrated into medium-voltage adjustable-speed motor drives for fans, pumps, and compressors without regenerative braking. The authors have designed and constructed a three-phase experimental system rated at 400V and 15kW, which is a downscaled model from a feasible 6.6-kV 1-MW motor drive system. This system consists of the hybrid filter connecting a passive filter tuned to the 7th harmonic filter in series with an active filter that is based on a three-level diode-clamped PWM converter, as well as an adjustable-speed motor drive in which a diode rectifier is used as the front end. The hybrid filter is installed on the ac side of the diode rectifier with no line-frequency transformer. The downscaled system has been exclusively tested so as to confirm the overall compensating performance of the hybrid filter and the filtering performance of a switching-ripple filter for mitigating switching-ripple voltages produced by the active filter. Experimental results verify that the hybrid filter achieves harmonic compensation of the source current in all the operating regions from no-load to the rated-load conditions, and that the switching-ripple filter reduces the switching-ripple voltages as expected.

A real-time recursive filter for the attitude determination of the Spacelab instrument pointing subsystem

NASA Technical Reports Server (NTRS)

West, M. E.

1992-01-01

A real-time estimation filter which reduces sensitivity to system variations and reduces the amount of preflight computation is developed for the instrument pointing subsystem (IPS). The IPS is a three-axis stabilized platform developed to point various astronomical observation instruments aboard the shuttle. Currently, the IPS utilizes a linearized Kalman filter (LKF), with premission defined gains, to compensate for system drifts and accumulated attitude errors. Since the a priori gains are generated for an expected system, variations result in a suboptimal estimation process. This report compares the performance of three real-time estimation filters with the current LKF implementation. An extended Kalman filter and a second-order Kalman filter are developed to account for the system nonlinearities, while a linear Kalman filter implementation assumes that the nonlinearities are negligible. The performance of each of the four estimation filters are compared with respect to accuracy, stability, settling time, robustness, and computational requirements. It is shown, that for the current IPS pointing requirements, the linear Kalman filter provides improved robustness over the LKF with less computational requirements than the two real-time nonlinear estimation filters.

A periodic spatio-spectral filter for event-related potentials.

PubMed

Ghaderi, Foad; Kim, Su Kyoung; Kirchner, Elsa Andrea

2016-12-01

With respect to single trial detection of event-related potentials (ERPs), spatial and spectral filters are two of the most commonly used pre-processing techniques for signal enhancement. Spatial filters reduce the dimensionality of the data while suppressing the noise contribution and spectral filters attenuate frequency components that most likely belong to noise subspace. However, the frequency spectrum of ERPs overlap with that of the ongoing electroencephalogram (EEG) and different types of artifacts. Therefore, proper selection of the spectral filter cutoffs is not a trivial task. In this research work, we developed a supervised method to estimate the spatial and finite impulse response (FIR) spectral filters, simultaneously. We evaluated the performance of the method on offline single trial classification of ERPs in datasets recorded during an oddball paradigm. The proposed spatio-spectral filter improved the overall single-trial classification performance by almost 9% on average compared with the case that no spatial filters were used. We also analyzed the effects of different spectral filter lengths and the number of retained channels after spatial filtering. Copyright © 2016. Published by Elsevier Ltd.

Nonlinear estimation theory applied to orbit determination

NASA Technical Reports Server (NTRS)

Choe, C. Y.

1972-01-01

The development of an approximate nonlinear filter using the Martingale theory and appropriate smoothing properties is considered. Both the first order and the second order moments were estimated. The filter developed can be classified as a modified Gaussian second order filter. Its performance was evaluated in a simulated study of the problem of estimating the state of an interplanetary space vehicle during both a simulated Jupiter flyby and a simulated Jupiter orbiter mission. In addition to the modified Gaussian second order filter, the modified truncated second order filter was also evaluated in the simulated study. Results obtained with each of these filters were compared with numerical results obtained with the extended Kalman filter and the performance of each filter is determined by comparison with the actual estimation errors. The simulations were designed to determine the effects of the second order terms in the dynamic state relations, the observation state relations, and the Kalman gain compensation term. It is shown that the Kalman gain-compensated filter which includes only the Kalman gain compensation term is superior to all of the other filters.

Achieving a Successful Scale-Down Model and Optimized Economics through Parvovirus Filter Validation using Purified TrueSpikeTM Viruses.

PubMed

De Vilmorin, Philippe; Slocum, Ashley; Jaber, Tareq; Schaefer, Oliver; Ruppach, Horst; Genest, Paul

2015-01-01

This article describes a four virus panel validation of EMD Millipore's (Bedford, MA) small virus-retentive filter, Viresolve® Pro, using TrueSpike(TM) viruses for a Biogen Idec process intermediate. The study was performed at Charles River Labs in King of Prussia, PA. Greater than 900 L/m(2) filter throughput was achieved with the approximately 8 g/L monoclonal antibody feed. No viruses were detected in any filtrate samples. All virus log reduction values were between ≥3.66 and ≥5.60. The use of TrueSpike(TM) at Charles River Labs allowed Biogen Idec to achieve a more representative scaled-down model and potentially reduce the cost of its virus filtration step and the overall cost of goods. The body of data presented here is an example of the benefits of following the guidance from the PDA Technical Report 47, The Preparation of Virus Spikes Used for Viral Clearance Studies. The safety of biopharmaceuticals is assured through the use of multiple steps in the purification process that are capable of virus clearance, including filtration with virus-retentive filters. The amount of virus present at the downstream stages in the process is expected to be and is typically low. The viral clearance capability of the filtration step is assessed in a validation study. The study utilizes a small version of the larger manufacturing size filter, and a large, known amount of virus is added to the feed prior to filtration. Viral assay before and after filtration allows the virus log reduction value to be quantified. The representativeness of the small-scale model is supported by comparing large-scale filter performance to small-scale filter performance. The large-scale and small-scale filtration runs are performed using the same operating conditions. If the filter performance at both scales is comparable, it supports the applicability of the virus log reduction value obtained with the small-scale filter to the large-scale manufacturing process. However, the virus preparation used to spike the feed material often contains impurities that contribute adversely to virus filter performance in the small-scale model. The added impurities from the virus spike, which are not present at manufacturing scale, compromise the scale-down model and put into question the direct applicability of the virus clearance results. Another consequence of decreased filter performance due to virus spike impurities is the unnecessary over-sizing of the manufacturing system to match the low filter capacity observed in the scale-down model. This article describes how improvements in mammalian virus spike purity ensure the validity of the log reduction value obtained with the scale-down model and support economically optimized filter usage. © PDA, Inc. 2015.

Edge Probability and Pixel Relativity-Based Speckle Reducing Anisotropic Diffusion.

PubMed

Mishra, Deepak; Chaudhury, Santanu; Sarkar, Mukul; Soin, Arvinder Singh; Sharma, Vivek

2018-02-01

Anisotropic diffusion filters are one of the best choices for speckle reduction in the ultrasound images. These filters control the diffusion flux flow using local image statistics and provide the desired speckle suppression. However, inefficient use of edge characteristics results in either oversmooth image or an image containing misinterpreted spurious edges. As a result, the diagnostic quality of the images becomes a concern. To alleviate such problems, a novel anisotropic diffusion-based speckle reducing filter is proposed in this paper. A probability density function of the edges along with pixel relativity information is used to control the diffusion flux flow. The probability density function helps in removing the spurious edges and the pixel relativity reduces the oversmoothing effects. Furthermore, the filtering is performed in superpixel domain to reduce the execution time, wherein a minimum of 15% of the total number of image pixels can be used. For performance evaluation, 31 frames of three synthetic images and 40 real ultrasound images are used. In most of the experiments, the proposed filter shows a better performance as compared to the state-of-the-art filters in terms of the speckle region's signal-to-noise ratio and mean square error. It also shows a comparative performance for figure of merit and structural similarity measure index. Furthermore, in the subjective evaluation, performed by the expert radiologists, the proposed filter's outputs are preferred for the improved contrast and sharpness of the object boundaries. Hence, the proposed filtering framework is suitable to reduce the unwanted speckle and improve the quality of the ultrasound images.

Individual and Joint Expert Judgments as Reference Standards in Artifact Detection

PubMed Central

Verduijn, Marion; Peek, Niels; de Keizer, Nicolette F.; van Lieshout, Erik-Jan; de Pont, Anne-Cornelie J.M.; Schultz, Marcus J.; de Jonge, Evert; de Mol, Bas A.J.M.

2008-01-01

Objective To investigate the agreement among clinical experts in their judgments of monitoring data with respect to artifacts, and to examine the effect of reference standards that consist of individual and joint expert judgments on the performance of artifact filters. Design Individual judgments of four physicians, a majority vote judgment, and a consensus judgment were obtained for 30 time series of three monitoring variables: mean arterial blood pressure (ABPm), central venous pressure (CVP), and heart rate (HR). The individual and joint judgments were used to tune three existing automated filtering methods and to evaluate the performance of the resulting filters. Measurements The interrater agreement was calculated in terms of positive specific agreement (PSA). The performance of the artifact filters was quantified in terms of sensitivity and positive predictive value (PPV). Results PSA values between 0.33 and 0.85 were observed among clinical experts in their selection of artifacts, with relatively high values for CVP data. Artifact filters developed using judgments of individual experts were found to moderately generalize to new time series and other experts; sensitivity values ranged from 0.40 to 0.60 for ABPm and HR filters (PPV: 0.57–0.84), and from 0.63 to 0.80 for CVP filters (PPV: 0.71–0.86). A higher performance value for the filters was found for the three variable types when joint judgments were used for tuning the filtering methods. Conclusion Given the disagreement among experts in their individual judgment of monitoring data with respect to artifacts, the use of joint reference standards obtained from multiple experts is recommended for development of automatic artifact filters. PMID:18096912

Fixed-frequency and Frequency-agile (au, HTS) Microstrip Bandstop Filters for L-band Applications

NASA Technical Reports Server (NTRS)

Saenz, Eileen M.; Subramanyam, Guru; VanKeuls, Fred W.; Chen, Chonglin; Miranda, Felix A.

2001-01-01

In this work, we report on the performance of a highly selective, compact 1.83 x 2.08 cm(exp 2) (approx. 0.72 x 0.82 in(exp 2) microstrip line bandstop filter of YBa2CU3O(7-delta) (YBCO) on LaAlO3 (LAO) substrate. The filter is designed for a center frequency of 1.623 GHz for a bandwidth at 3 dB from reference baseline of less than 5.15 MHz, and a bandstop rejection of 30 dB or better. The design and optimization of the filter was performed using Zeland's IE3D circuit simulator. The optimized design was used to fabricate gold (Au) and High-Temperature Superconductor (HTS) versions of the filter. We have also studied an electronically tunable version of the same filter. Tunability of the bandstop characteristics is achieved by the integration of a thin film conductor (Au or HTS) and the nonlinear dielectric ferroelectric SrTiO3 in a conductor/ferroelectric/dielectric modified microstrip configuration. The performance of these filters and comparison with the simulated data will be presented.

The Influence of Grain Refiners on the Efficiency of Ceramic Foam Filters

NASA Astrophysics Data System (ADS)

Towsey, Nicholas; Schneider, Wolfgang; Krug, Hans-Peter; Hardman, Angela; Keegan, Neil J.

An extensive program of work has been carried out to evaluate the efficiency of ceramic foam filters under carefully controlled conditions. Work reported at previous TMS meetings showed that in the absence of grain refiners, ceramic foam filters have the capacity for high filtration efficiency and consistent, reliable performance. The current phase of the investigation focuses on the impact grain refiner additions have on filter performance. The high filtration efficiencies obtained using 50 or 80ppi CFF's in the absence of grain refiners diminish when Al-3%Ti-1%B grain refiners are added. This, together with the impact of incoming inclusion loading on filter performance and the level of grain refiner addition are considered in detail. The new generation Al-3%Ti-0.15%C grain refiner has also been included. At typical addition levels (1kg/tonne) the effect on filter efficiency is similar to that for TiB2based grain refiners. The work was again conducted on a production scale using AA1050 alloy. Metal quality was determined using LiMCA and PoDFA. Spent filters were also analysed.

Functional performance in young Australian children with achondroplasia.

PubMed

Ireland, Penelope Jane; McGill, James; Zankl, Andreas; Ware, Robert S; Pacey, Verity; Ault, Jenny; Savarirayan, Ravi; Sillence, David; Thompson, Elizabeth M; Townshend, Sharron; Johnston, Leanne Marie

2011-10-01

The aim of this study was to determine population-specific developmental milestones for independence in self-care, mobility, and social cognitive skills in children with achondroplasia, the most common skeletal dysplasia. Population-based recruitment from October 2008 to October 2010 identified 44 Australian children with achondroplasia aged 3 to 7 years. Consenting parents of 35 children (16 males, 19 females 14 aged 3y; 12 aged 5y; nine aged 7y) reported their child's self-care, mobility, and social cognition function using the Functional Independence Measure for Children (WeeFIM-II) at the ages of 3 (n=14), 5 (n=12), or 7 (n=9) years. Children were excluded from the study if they had an additional neurological or musculoskeletal condition. Functioning improved in children with achondroplasia between the ages of 3 and 5 years, but not subsequently. Milestones in the achondroplasia group were delayed across all ages and domains compared with normative reference data. Children with achondroplasia required greater caregiver assistance for self-care and mobility skills than typically developing children based on normative data. Social cognition appeared to be an area of relative strength. Children up to 7 years of age with achondroplasia show delayed milestone acquisition and a greater need for caregiver assistance for all domains. As functional delays are likely to be related to common musculoskeletal impairments associated with achondroplasia, access to physiotherapists, occupational therapists, and speech and language pathologists skilled in achondroplasia management may assist children and families to become more independent, particularly around the time of starting school. © The Authors. Developmental Medicine & Child Neurology © 2011 Mac Keith Press.

Assessing Team Leadership in Emergency Medicine: The Milestones and Beyond

PubMed Central

Rosenman, Elizabeth D.; Branzetti, Jeremy B.; Fernandez, Rosemarie

2016-01-01

Background Team leadership is a critical skill for emergency medicine physicians that directly affects team performance and the quality of patient care. There exists a robust body of team science research supporting team leadership conceptual models and behavioral skill sets. However, to date, this work has not been widely incorporated into health care team leadership education. Objective This narrative review has 3 aims: (1) to synthesize the team science literature and to translate important concepts and models to health care team leadership; (2) to describe how team leadership is currently represented in the health care literature and in the Accreditation Council for Graduate Medical Education Milestones for emergency medicine; and (3) to propose a novel, evidence-based framework for the assessment of team leadership in emergency medicine. Methods We conducted a narrative review of the team science and health care literature. We summarized our findings and identified a list of team leadership behaviors that were then used to create a framework for team leadership assessment. Results Current health care team leadership measurement tools do not incorporate evidence-based models of leadership concepts from other established domains. The emergency medicine milestones include several team leadership behaviors as part of a larger resident evaluation program. However, they do not offer a comprehensive or cohesive representation of the team leadership construct. Conclusions Despite the importance of team leadership to patient care, there is no standardized approach to team leadership assessment in emergency medicine. Based on the results of our review, we propose a novel team leadership assessment framework that is supported by the team science literature. PMID:27413434

Assessing Team Leadership in Emergency Medicine: The Milestones and Beyond.

PubMed

Rosenman, Elizabeth D; Branzetti, Jeremy B; Fernandez, Rosemarie

2016-07-01

Team leadership is a critical skill for emergency medicine physicians that directly affects team performance and the quality of patient care. There exists a robust body of team science research supporting team leadership conceptual models and behavioral skill sets. However, to date, this work has not been widely incorporated into health care team leadership education. This narrative review has 3 aims: (1) to synthesize the team science literature and to translate important concepts and models to health care team leadership; (2) to describe how team leadership is currently represented in the health care literature and in the Accreditation Council for Graduate Medical Education Milestones for emergency medicine; and (3) to propose a novel, evidence-based framework for the assessment of team leadership in emergency medicine. We conducted a narrative review of the team science and health care literature. We summarized our findings and identified a list of team leadership behaviors that were then used to create a framework for team leadership assessment. Current health care team leadership measurement tools do not incorporate evidence-based models of leadership concepts from other established domains. The emergency medicine milestones include several team leadership behaviors as part of a larger resident evaluation program. However, they do not offer a comprehensive or cohesive representation of the team leadership construct. Despite the importance of team leadership to patient care, there is no standardized approach to team leadership assessment in emergency medicine. Based on the results of our review, we propose a novel team leadership assessment framework that is supported by the team science literature.

A Novel Approach to Noise-Filtering Based on a Gain-Scheduling Neural Network Architecture

NASA Technical Reports Server (NTRS)

Troudet, T.; Merrill, W.

1994-01-01

A gain-scheduling neural network architecture is proposed to enhance the noise-filtering efficiency of feedforward neural networks, in terms of both nominal performance and robustness. The synergistic benefits of the proposed architecture are demonstrated and discussed in the context of the noise-filtering of signals that are typically encountered in aerospace control systems. The synthesis of such a gain-scheduled neurofiltering provides the robustness of linear filtering, while preserving the nominal performance advantage of conventional nonlinear neurofiltering. Quantitative performance and robustness evaluations are provided for the signal processing of pitch rate responses to typical pilot command inputs for a modern fighter aircraft model.

Distortion analysis of subband adaptive filtering methods for FMRI active noise control systems.

PubMed

Milani, Ali A; Panahi, Issa M; Briggs, Richard

2007-01-01

Delayless subband filtering structure, as a high performance frequency domain filtering technique, is used for canceling broadband fMRI noise (8 kHz bandwidth). In this method, adaptive filtering is done in subbands and the coefficients of the main canceling filter are computed by stacking the subband weights together. There are two types of stacking methods called FFT and FFT-2. In this paper, we analyze the distortion introduced by these two stacking methods. The effect of the stacking distortion on the performance of different adaptive filters in FXLMS algorithm with non-minimum phase secondary path is explored. The investigation is done for different adaptive algorithms (nLMS, APA and RLS), different weight stacking methods, and different number of subbands.

Robust estimation of event-related potentials via particle filter.

PubMed

Fukami, Tadanori; Watanabe, Jun; Ishikawa, Fumito

2016-03-01

In clinical examinations and brain-computer interface (BCI) research, a short electroencephalogram (EEG) measurement time is ideal. The use of event-related potentials (ERPs) relies on both estimation accuracy and processing time. We tested a particle filter that uses a large number of particles to construct a probability distribution. We constructed a simple model for recording EEG comprising three components: ERPs approximated via a trend model, background waves constructed via an autoregressive model, and noise. We evaluated the performance of the particle filter based on mean squared error (MSE), P300 peak amplitude, and latency. We then compared our filter with the Kalman filter and a conventional simple averaging method. To confirm the efficacy of the filter, we used it to estimate ERP elicited by a P300 BCI speller. A 400-particle filter produced the best MSE. We found that the merit of the filter increased when the original waveform already had a low signal-to-noise ratio (SNR) (i.e., the power ratio between ERP and background EEG). We calculated the amount of averaging necessary after applying a particle filter that produced a result equivalent to that associated with conventional averaging, and determined that the particle filter yielded a maximum 42.8% reduction in measurement time. The particle filter performed better than both the Kalman filter and conventional averaging for a low SNR in terms of both MSE and P300 peak amplitude and latency. For EEG data produced by the P300 speller, we were able to use our filter to obtain ERP waveforms that were stable compared with averages produced by a conventional averaging method, irrespective of the amount of averaging. We confirmed that particle filters are efficacious in reducing the measurement time required during simulations with a low SNR. Additionally, particle filters can perform robust ERP estimation for EEG data produced via a P300 speller. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

On the Performance of the Martin Digital Filter for High- and Low-pass Applications

NASA Technical Reports Server (NTRS)

Mcclain, C. R.

1979-01-01

A nonrecursive numerical filter is described in which the weighting sequence is optimized by minimizing the excursion from the ideal rectangular filter in a least squares sense over the entire domain of normalized frequency. Additional corrections to the weights in order to reduce overshoot oscillations (Gibbs phenomenon) and to insure unity gain at zero frequency for the low pass filter are incorporated. The filter is characterized by a zero phase shift for all frequencies (due to a symmetric weighting sequence), a finite memory and stability, and it may readily be transformed to a high pass filter. Equations for the filter weights and the frequency response function are presented, and applications to high and low pass filtering are examined. A discussion of optimization of high pass filter parameters for a rather stringent response requirement is given in an application to the removal of aircraft low frequency oscillations superimposed on remotely sensed ocean surface profiles. Several frequency response functions are displayed, both in normalized frequency space and in period space. A comparison of the performance of the Martin filter with some other commonly used low pass digital filters is provided in an application to oceanographic data.

Adaptive Estimation of Multiple Fading Factors for GPS/INS Integrated Navigation Systems.

PubMed

Jiang, Chen; Zhang, Shu-Bi; Zhang, Qiu-Zhao

2017-06-01

The Kalman filter has been widely applied in the field of dynamic navigation and positioning. However, its performance will be degraded in the presence of significant model errors and uncertain interferences. In the literature, the fading filter was proposed to control the influences of the model errors, and the H-infinity filter can be adopted to address the uncertainties by minimizing the estimation error in the worst case. In this paper, a new multiple fading factor, suitable for the Global Positioning System (GPS) and the Inertial Navigation System (INS) integrated navigation system, is proposed based on the optimization of the filter, and a comprehensive filtering algorithm is constructed by integrating the advantages of the H-infinity filter and the proposed multiple fading filter. Measurement data of the GPS/INS integrated navigation system are collected under actual conditions. Stability and robustness of the proposed filtering algorithm are tested with various experiments and contrastive analysis are performed with the measurement data. Results demonstrate that both the filter divergence and the influences of outliers are restrained effectively with the proposed filtering algorithm, and precision of the filtering results are improved simultaneously.

Software Would Largely Automate Design of Kalman Filter

NASA Technical Reports Server (NTRS)

Chuang, Jason C. H.; Negast, William J.

2005-01-01

Embedded Navigation Filter Automatic Designer (ENFAD) is a computer program being developed to automate the most difficult tasks in designing embedded software to implement a Kalman filter in a navigation system. The most difficult tasks are selection of error states of the filter and tuning of filter parameters, which are timeconsuming trial-and-error tasks that require expertise and rarely yield optimum results. An optimum selection of error states and filter parameters depends on navigation-sensor and vehicle characteristics, and on filter processing time. ENFAD would include a simulation module that would incorporate all possible error states with respect to a given set of vehicle and sensor characteristics. The first of two iterative optimization loops would vary the selection of error states until the best filter performance was achieved in Monte Carlo simulations. For a fixed selection of error states, the second loop would vary the filter parameter values until an optimal performance value was obtained. Design constraints would be satisfied in the optimization loops. Users would supply vehicle and sensor test data that would be used to refine digital models in ENFAD. Filter processing time and filter accuracy would be computed by ENFAD.

Real-valued composite filters for correlation-based optical pattern recognition

NASA Technical Reports Server (NTRS)

Rajan, P. K.; Balendra, Anushia

1992-01-01

Advances in the technology of optical devices such as spatial light modulators (SLMs) have influenced the research and growth of optical pattern recognition. In the research leading to this report, the design of real-valued composite filters that can be implemented using currently available SLMs for optical pattern recognition and classification was investigated. The design of real-valued minimum average correlation energy (RMACE) filter was investigated. Proper selection of the phase of the output response was shown to reduce the correlation energy. The performance of the filter was evaluated using computer simulations and compared with the complex filters. It was found that the performance degraded only slightly. Continuing the above investigation, the design of a real filter that minimizes the output correlation energy and the output variance due to noise was developed. Simulation studies showed that this filter had better tolerance to distortion and noise compared to that of the RMACE filter. Finally, the space domain design of RMACE filter was developed and implemented on the computer. It was found that the sharpness of the correlation peak was slightly reduced but the filter design was more computationally efficient than the complex filter.

Technology Advancement of the Visible Nulling Coronagraph

NASA Technical Reports Server (NTRS)

Lyon, Richard G.; Clampin, Mark; Petrone, Peter; Thompson, Patrick; Bolcar, Matt; Madison, Timothy; Woodruff, Robert; Noecker, Charley; Kendrick, Steve

2010-01-01

The critical high contrast imaging technology for the Extrasolar Planetary Imaging Coronagraph (EPIC) mission concept is the visible nulling coronagraph (VNC). EPIC would be capable of imaging jovian planets, dust/debris disks, and potentially super-Earths and contribute to answering how bright the debris disks are for candidate stars. The contrast requirement for EPIC is 10(exp 9) contrast at 125 milli-arseconds inner working angle. To advance the VNC technology NASA/Goddard Space Flight Center, in collaboration with Lockheed-Martin, previously developed a vacuum VNC testbed, and achieved narrowband and broadband suppression of the core of the Airy disk. Recently our group was awarded a NASA Technology Development for Exoplanet Missions to achieve two milestones: (i) 10(exp 8) contrast in narrowband light, and, (ii) 10(ecp 9) contrast in broader band light; one milestone per year, and both at 2 Lambda/D inner working angle. These will be achieved with our 2nd generation testbed known as the visible nulling testbed (VNT). It contains a MEMS based hex-packed segmented deformable mirror known as the multiple mirror array (MMA) and coherent fiber bundle, i.e. a spatial filter array (SFA). The MMA is in one interferometric arm and works to set the wavefront differences between the arms to zero. Each of the MMA segments is optically mapped to a single mode fiber of the SFA, and the SFA passively cleans the sub-aperture wavefront error leaving only piston, tip and tilt error to be controlled. The piston degree of freedom on each segment is used to correct the wavefront errors, while the tip/tilt is used to simultaneously correct the amplitude errors. Thus the VNT controls both amplitude and wavefront errors with a single MMA in closed-loop in a vacuum tank at approx.20 Hz. Herein we will discuss our ongoing progress with the VNT.

Assessment of exhaust emissions from carbon nanotube production and particle collection by sampling filters.

PubMed

Tsai, Candace Su-Jung; Hofmann, Mario; Hallock, Marilyn; Ellenbecker, Michael; Kong, Jing

2015-11-01

This study performed a workplace evaluation of emission control using available air sampling filters and characterized the emitted particles captured in filters. Characterized particles were contained in the exhaust gas released from carbon nanotube (CNT) synthesis using chemical vapor deposition (CVD). Emitted nanoparticles were collected on grids to be analyzed using transmission electron microscopy (TEM). CNT clusters in the exhaust gas were collected on filters for investigation. Three types of filters, including Nalgene surfactant-free cellulose acetate (SFCA), Pall A/E glass fiber, and Whatman QMA quartz filters, were evaluated as emission control measures, and particles deposited in the filters were characterized using scanning transmission electron microscopy (STEM) to further understand the nature of particles emitted from this CNT production. STEM analysis for collected particles on filters found that particles deposited on filter fibers had a similar morphology on all three filters, that is, hydrophobic agglomerates forming circular beaded clusters on hydrophilic filter fibers on the collecting side of the filter. CNT agglomerates were found trapped underneath the filter surface. The particle agglomerates consisted mostly of elemental carbon regardless of the shapes. Most particles were trapped in filters and no particles were found in the exhaust downstream from A/E and quartz filters, while a few nanometer-sized and submicrometer-sized individual particles and filament agglomerates were found downstream from the SFCA filter. The number concentration of particles with diameters from 5 nm to 20 µm was measured while collecting particles on grids at the exhaust piping. Total number concentration was reduced from an average of 88,500 to 700 particle/cm(3) for the lowest found for all filters used. Overall, the quartz filter showed the most consistent and highest particle reduction control, and exhaust particles containing nanotubes were successfully collected and trapped inside this filter. As concern for the toxicity of engineered nanoparticles grows, there is a need to characterize emission from carbon nanotube synthesis processes and to investigate methods to prevent their environmental release. At this time, the particles emitted from synthesis were not well characterized when collected on filters, and limited information was available about filter performance to such emission. This field study used readily available sampling filters to collect nanoparticles from the exhaust gas of a carbon nanotube furnace. New agglomerates were found on filters from such emitted particles, and the performance of using the filters studied was encouraging in terms of capturing emissions from carbon nanotube synthesis.

High-Performance Monitoring Architecture for Large-Scale Distributed Systems Using Event Filtering

NASA Technical Reports Server (NTRS)

Maly, K.

1998-01-01

Monitoring is an essential process to observe and improve the reliability and the performance of large-scale distributed (LSD) systems. In an LSD environment, a large number of events is generated by the system components during its execution or interaction with external objects (e.g. users or processes). Monitoring such events is necessary for observing the run-time behavior of LSD systems and providing status information required for debugging, tuning and managing such applications. However, correlated events are generated concurrently and could be distributed in various locations in the applications environment which complicates the management decisions process and thereby makes monitoring LSD systems an intricate task. We propose a scalable high-performance monitoring architecture for LSD systems to detect and classify interesting local and global events and disseminate the monitoring information to the corresponding end- points management applications such as debugging and reactive control tools to improve the application performance and reliability. A large volume of events may be generated due to the extensive demands of the monitoring applications and the high interaction of LSD systems. The monitoring architecture employs a high-performance event filtering mechanism to efficiently process the large volume of event traffic generated by LSD systems and minimize the intrusiveness of the monitoring process by reducing the event traffic flow in the system and distributing the monitoring computation. Our architecture also supports dynamic and flexible reconfiguration of the monitoring mechanism via its Instrumentation and subscription components. As a case study, we show how our monitoring architecture can be utilized to improve the reliability and the performance of the Interactive Remote Instruction (IRI) system which is a large-scale distributed system for collaborative distance learning. The filtering mechanism represents an Intrinsic component integrated with the monitoring architecture to reduce the volume of event traffic flow in the system, and thereby reduce the intrusiveness of the monitoring process. We are developing an event filtering architecture to efficiently process the large volume of event traffic generated by LSD systems (such as distributed interactive applications). This filtering architecture is used to monitor collaborative distance learning application for obtaining debugging and feedback information. Our architecture supports the dynamic (re)configuration and optimization of event filters in large-scale distributed systems. Our work represents a major contribution by (1) survey and evaluating existing event filtering mechanisms In supporting monitoring LSD systems and (2) devising an integrated scalable high- performance architecture of event filtering that spans several kev application domains, presenting techniques to improve the functionality, performance and scalability. This paper describes the primary characteristics and challenges of developing high-performance event filtering for monitoring LSD systems. We survey existing event filtering mechanisms and explain key characteristics for each technique. In addition, we discuss limitations with existing event filtering mechanisms and outline how our architecture will improve key aspects of event filtering.

Generic Information Can Retrieve Known Biological Associations: Implications for Biomedical Knowledge Discovery

PubMed Central

van Haagen, Herman H. H. B. M.; 't Hoen, Peter A. C.; Mons, Barend; Schultes, Erik A.

2013-01-01

Motivation Weighted semantic networks built from text-mined literature can be used to retrieve known protein-protein or gene-disease associations, and have been shown to anticipate associations years before they are explicitly stated in the literature. Our text-mining system recognizes over 640,000 biomedical concepts: some are specific (i.e., names of genes or proteins) others generic (e.g., ‘Homo sapiens’). Generic concepts may play important roles in automated information retrieval, extraction, and inference but may also result in concept overload and confound retrieval and reasoning with low-relevance or even spurious links. Here, we attempted to optimize the retrieval performance for protein-protein interactions (PPI) by filtering generic concepts (node filtering) or links to generic concepts (edge filtering) from a weighted semantic network. First, we defined metrics based on network properties that quantify the specificity of concepts. Then using these metrics, we systematically filtered generic information from the network while monitoring retrieval performance of known protein-protein interactions. We also systematically filtered specific information from the network (inverse filtering), and assessed the retrieval performance of networks composed of generic information alone. Results Filtering generic or specific information induced a two-phase response in retrieval performance: initially the effects of filtering were minimal but beyond a critical threshold network performance suddenly drops. Contrary to expectations, networks composed exclusively of generic information demonstrated retrieval performance comparable to unfiltered networks that also contain specific concepts. Furthermore, an analysis using individual generic concepts demonstrated that they can effectively support the retrieval of known protein-protein interactions. For instance the concept “binding” is indicative for PPI retrieval and the concept “mutation abnormality” is indicative for gene-disease associations. Conclusion Generic concepts are important for information retrieval and cannot be removed from semantic networks without negative impact on retrieval performance. PMID:24260124

Protein-Based Nanofabrics for Multifunctional Air Filtering

NASA Astrophysics Data System (ADS)

Souzandeh, Hamid

With the fast development of economics and population, air pollution is getting worse and becomes a great concern worldwide. The release of chemicals, particulates and biological materials into air can lead to various diseases or discomfort to humans and other living organisms, alongside other serious impacts on the environment. Therefore, improving indoor air quality using various air filters is in critical need because people stay inside buildings most time of the day. However, current air filters using traditional polymers can only remove particles from the polluted air and disposing the huge amount of used air filters can cause serious secondary environmental pollution. Therefore, development of multi-functional air filter materials with environmental friendliness is significant. For this purpose, we developed "green" protein-based multifunctional air-filtering materials. The outstanding performance of the green materials in removal of multiple species of pollutants, including particulate matter, toxic chemicals, and biological hazards, simultaneously, will greatly facilitate the development of the next-generation air-filtration systems. First and foremost, we developed high-performance protein-based nanofabric air-filter mats. It was found that the protein-nanofabrics possess high-efficiency multifunctional air-filtering properties for both particles and various species of chemical gases. Then, the high-performance natural protein-based nanofabrics were promoted both mechanically and functionally by a textured cellulose paper towel. It is interestingly discovered that the textured cellulose paper towel not only can act as a flexible mechanical support, but also a type of airflow regulator which can improve the pollutant-nanofilter interactions. Furthermore, the protein-based nanofabrics were crosslinked in order to enhance the environmental-stability of the filters. It was found that the crosslinked protein-nanofabrics can significantly improve the structure stability against different moisture levels and temperatures, while maintain the multifunctional filtration performance. Moreover, it was demonstrated that the crosslinked protein-nanomaterials also possess antibacterial properties against the selected gram-negative and gram-positive bacteria. This provides a cost-effective solution for advanced "green" nanomaterials with excellent performance in both filtration functions and structure stability under varying environment. This work indicates that protein-based air-filters are promising "green" air-filtering materials for next-generation air-filtration systems.

Performance comparison of denoising filters for source camera identification

NASA Astrophysics Data System (ADS)

Cortiana, A.; Conotter, V.; Boato, G.; De Natale, F. G. B.

2011-02-01

Source identification for digital content is one of the main branches of digital image forensics. It relies on the extraction of the photo-response non-uniformity (PRNU) noise as a unique intrinsic fingerprint that efficiently characterizes the digital device which generated the content. Such noise is estimated as the difference between the content and its de-noised version obtained via denoising filter processing. This paper proposes a performance comparison of different denoising filters for source identification purposes. In particular, results achieved with a sophisticated 3D filter are presented and discussed with respect to state-of-the-art denoising filters previously employed in such a context.

The research of radar target tracking observed information linear filter method

NASA Astrophysics Data System (ADS)

Chen, Zheng; Zhao, Xuanzhi; Zhang, Wen

2018-05-01

Aiming at the problems of low precision or even precision divergent is caused by nonlinear observation equation in radar target tracking, a new filtering algorithm is proposed in this paper. In this algorithm, local linearization is carried out on the observed data of the distance and angle respectively. Then the kalman filter is performed on the linearized data. After getting filtered data, a mapping operation will provide the posteriori estimation of target state. A large number of simulation results show that this algorithm can solve above problems effectively, and performance is better than the traditional filtering algorithm for nonlinear dynamic systems.

Filtered epithermal quasi-monoenergetic neutron beams at research reactor facilities.

PubMed

Mansy, M S; Bashter, I I; El-Mesiry, M S; Habib, N; Adib, M

2015-03-01

Filtered neutron techniques were applied to produce quasi-monoenergetic neutron beams in the energy range of 1.5-133keV at research reactors. A simulation study was performed to characterize the filter components and transmitted beam lines. The filtered beams were characterized in terms of the optimal thickness of the main and additive components. The filtered neutron beams had high purity and intensity, with low contamination from the accompanying thermal emission, fast neutrons and γ-rays. A computer code named "QMNB" was developed in the "MATLAB" programming language to perform the required calculations. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Unified Fisher's Ratio Learning Method for Spatial Filter Optimization.

PubMed

Li, Xinyang; Guan, Cuntai; Zhang, Haihong; Ang, Kai Keng

To detect the mental task of interest, spatial filtering has been widely used to enhance the spatial resolution of electroencephalography (EEG). However, the effectiveness of spatial filtering is undermined due to the significant nonstationarity of EEG. Based on regularization, most of the conventional stationary spatial filter design methods address the nonstationarity at the cost of the interclass discrimination. Moreover, spatial filter optimization is inconsistent with feature extraction when EEG covariance matrices could not be jointly diagonalized due to the regularization. In this paper, we propose a novel framework for a spatial filter design. With Fisher's ratio in feature space directly used as the objective function, the spatial filter optimization is unified with feature extraction. Given its ratio form, the selection of the regularization parameter could be avoided. We evaluate the proposed method on a binary motor imagery data set of 16 subjects, who performed the calibration and test sessions on different days. The experimental results show that the proposed method yields improvement in classification performance for both single broadband and filter bank settings compared with conventional nonunified methods. We also provide a systematic attempt to compare different objective functions in modeling data nonstationarity with simulation studies.To detect the mental task of interest, spatial filtering has been widely used to enhance the spatial resolution of electroencephalography (EEG). However, the effectiveness of spatial filtering is undermined due to the significant nonstationarity of EEG. Based on regularization, most of the conventional stationary spatial filter design methods address the nonstationarity at the cost of the interclass discrimination. Moreover, spatial filter optimization is inconsistent with feature extraction when EEG covariance matrices could not be jointly diagonalized due to the regularization. In this paper, we propose a novel framework for a spatial filter design. With Fisher's ratio in feature space directly used as the objective function, the spatial filter optimization is unified with feature extraction. Given its ratio form, the selection of the regularization parameter could be avoided. We evaluate the proposed method on a binary motor imagery data set of 16 subjects, who performed the calibration and test sessions on different days. The experimental results show that the proposed method yields improvement in classification performance for both single broadband and filter bank settings compared with conventional nonunified methods. We also provide a systematic attempt to compare different objective functions in modeling data nonstationarity with simulation studies.

Reductions of E. coli, echovirus type 12 and bacteriophages in an intermittently operated household-scale slow sand filter.

PubMed

Elliott, M A; Stauber, C E; Koksal, F; DiGiano, F A; Sobsey, M D

2008-05-01

Point-of-use (POU) drinking water treatment technology enables those without access to safe water sources to improve the quality of their water by treating it in the home. One of the most promising emerging POU technologies is the biosand filter (BSF), a household-scale, intermittently operated slow sand filter. Over 500,000 people in developing countries currently use the filters to treat their drinking water. However, despite this successful implementation, there has been almost no systematic, process engineering research to substantiate the effectiveness of the BSF or to optimize its design and operation. The major objectives of this research were to: (1) gain an understanding of the hydraulic flow condition within the filter (2) characterize the ability of the BSF to reduce the concentration of enteric bacteria and viruses in water and (3) gain insight into the key parameters of filter operation and their effects on filter performance. Three 6-8 week microbial challenge experiments are reported herein in which local surface water was seeded with E. coli, echovirus type 12 and bacteriophages (MS2 and PRD-1) and charged to the filter daily. Tracer tests indicate that the BSF operated at hydraulic conditions closely resembling plug flow. The performance of the filter in reducing microbial concentrations was highly dependent upon (1) filter ripening over weeks of operation and (2) the daily volume charged to the filter. BSF performance was best when less than one pore volume (18.3-L in the filter design studied) was charged to the filter per day and this has important implications for filter design and operation. Enhanced filter performance due to ripening was generally observed after roughly 30 days. Reductions of E. coli B ranged from 0.3 log10 (50%) to 4 log10, with geometric mean reductions after at least 30 days of operation of 1.9 log10. Echovirus 12 reductions were comparable to those for E. coli B with a range of 1 log10 to >3 log10 and mean reductions after 30 days of 2.1 log10. Bacteriophage reductions were much lower, ranging from zero to 1.3 log10 (95%) with mean reductions of only 0.5 log10 (70%). These data indicate that virus reduction by BSF may differ substantially depending upon the specific viral agent.

Experimental Study on Ultrafine Particle Removal Performance of Portable Air Cleaners with Different Filters in an Office Room

PubMed Central

Ma, Huan; Shen, Henggen; Shui, Tiantian; Li, Qing; Zhou, Liuke

2016-01-01

Size- and time-dependent aerodynamic behaviors of indoor particles, including PM1.0, were evaluated in a school office in order to test the performance of air-cleaning devices using different filters. In-situ real-time measurements were taken using an optical particle counter. The filtration characteristics of filter media, including single-pass efficiency, volume and effectiveness, were evaluated and analyzed. The electret filter (EE) medium shows better initial removal efficiency than the high efficiency (HE) medium in the 0.3–3.5 μm particle size range, while under the same face velocity, the filtration resistance of the HE medium is several times higher than that of the EE medium. During service life testing, the efficiency of the EE medium decreased to 60% with a total purifying air flow of 25 × 104 m3/m2. The resistance curve rose slightly before the efficiency reached the bottom, and then increased almost exponentially. The single-pass efficiency of portable air cleaner (PAC) with the pre-filter (PR) or the active carbon granule filter (CF) was relatively poor. While PAC with the pre-filter and the high efficiency filter (PR&HE) showed maximum single-pass efficiency for PM1.0 (88.6%), PAC with the HE was the most effective at removing PM1.0. The enhancement of PR with HE and electret filters augmented the single-pass efficiency, but lessened the airflow rate and effectiveness. Combined with PR, the decay constant of large-sized particles could be greater than for PACs without PR. Without regard to the lifetime, the electret filters performed better with respect to resource saving and purification improvement. A most penetrating particle size range (MPPS: 0.4–0.65 μm) exists in both HE and electret filters; the MPPS tends to become larger after HE and electret filters are combined with PR. These results serve to provide a better understanding of the indoor particle removal performance of PACs when combined with different kinds of filters in school office buildings. PMID:26742055

Filter Leaf. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Wooley, John F.

In the operation of vacuum filters and belt filters, it is desirable to evaluate the performance of different types of filter media and conditioning processes. The filter leaf test, which is used to evaluate these items, is described. Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1…

Lessons learned in preparing method 29 filters for compliance testing audits.

PubMed

Martz, R F; McCartney, J E; Bursey, J T; Riley, C E

2000-01-01

Companies conducting compliance testing are required to analyze audit samples at the time they collect and analyze the stack samples if audit samples are available. Eastern Research Group (ERG) provides technical support to the EPA's Emission Measurements Center's Stationary Source Audit Program (SSAP) for developing, preparing, and distributing performance evaluation samples and audit materials. These audit samples are requested via the regulatory Agency and include spiked audit materials for EPA Method 29-Metals Emissions from Stationary Sources, as well as other methods. To provide appropriate audit materials to federal, state, tribal, and local governments, as well as agencies performing environmental activities and conducting emission compliance tests, ERG has recently performed testing of blank filter materials and preparation of spiked filters for EPA Method 29. For sampling stationary sources using an EPA Method 29 sampling train, the use of filters without organic binders containing less than 1.3 microg/in.2 of each of the metals to be measured is required. Risk Assessment testing imposes even stricter requirements for clean filter background levels. Three vendor sources of quartz fiber filters were evaluated for background contamination to ensure that audit samples would be prepared using filters with the lowest metal background levels. A procedure was developed to test new filters, and a cleaning procedure was evaluated to see if a greater level of cleanliness could be achieved using an acid rinse with new filters. Background levels for filters supplied by different vendors and within lots of filters from the same vendor showed a wide variation, confirmed through contact with several analytical laboratories that frequently perform EPA Method 29 analyses. It has been necessary to repeat more than one compliance test because of suspect metals background contamination levels. An acid cleaning step produced improvement in contamination level, but the difference was not significant for most of the Method 29 target metals. As a result of our studies, we conclude: Filters for Method 29 testing should be purchased in lots as large as possible. Testing firms should pre-screen new boxes and/or new lots of filters used for Method 29 testing. Random analysis of three filters (top, middle, bottom of the box) from a new box of vendor filters before allowing them to be used in field tests is a prudent approach. A box of filters from a given vendor should be screened, and filters from this screened box should be used both for testing and as field blanks in each test scenario to provide the level of quality assurance required for stationary source testing.

Spectral analysis and filtering techniques in digital spatial data processing

USGS Publications Warehouse

Pan, Jeng-Jong

1989-01-01

A filter toolbox has been developed at the EROS Data Center, US Geological Survey, for retrieving or removing specified frequency information from two-dimensional digital spatial data. This filter toolbox provides capabilities to compute the power spectrum of a given data and to design various filters in the frequency domain. Three types of filters are available in the toolbox: point filter, line filter, and area filter. Both the point and line filters employ Gaussian-type notch filters, and the area filter includes the capabilities to perform high-pass, band-pass, low-pass, and wedge filtering techniques. These filters are applied for analyzing satellite multispectral scanner data, airborne visible and infrared imaging spectrometer (AVIRIS) data, gravity data, and the digital elevation models (DEM) data. -from Author

Development and test of electromechanical actuators for thrust vector control

NASA Technical Reports Server (NTRS)

Weir, Rae A.; Cowan, John R.

1993-01-01

A road map of milestones toward the goal of a full scale Redesigned Solid Rocket Motor/Flight Support Motor (RSRM/FSM) hot fire test is discussed. These milestones include: component feasibility, full power system demonstration, SSME hot fire tests, and RSRM hot fire tests. The participation of the Marshall Space Flight Center is emphasized.

Puberty: Maturation, Timing and Adjustment, and Sexual Identity Developmental Milestones among Lesbian, Gay, and Bisexual Youth

ERIC Educational Resources Information Center

Grossman, Arnold H.; Foss, Alexander H.; D'Augelli, Anthony R.

2014-01-01

This study examined pubertal maturation, pubertal timing and outcomes, and the relationship of puberty and sexual identity developmental milestones among 507 lesbian, gay, and bisexual youth. The onset of menarche and spermarche occurred at the mean ages of 12.05 and 12.46, respectively. There was no statistically significant difference in…

Dark Sectors 2016 Workshop: Community Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alexander, Jim; et al.

This report, based on the Dark Sectors workshop at SLAC in April 2016, summarizes the scientific importance of searches for dark sector dark matter and forces at masses beneath the weak-scale, the status of this broad international field, the important milestones motivating future exploration, and promising experimental opportunities to reach these milestones over the next 5-10 years.

Global Combat Support System - Joint Increment 8 (GCSS-J Inc 8)

DTIC Science & Technology

2016-03-01

Acquisition Executive DoD - Department of Defense DoDAF - DoD Architecture Framework FD - Full Deployment FDD - Full Deployment Decision FY - Fiscal...Estimate (Or Actual) Milestone B1 Mar 2014 Mar 2014 Milestone C1 Mar 2014 Mar 2014 Increment 8 FDD Dec 2018 Dec 2018 Increment 8 FD TBD TBD Memo 1

Analyzing Milestones in Smoking Cessation: Illustration in a Nicotine Patch Trial in Adult Smokers

ERIC Educational Resources Information Center

Shiffman, Saul; Scharf, Deborah M.; Shadel, William G.; Gwaltney, Chad J.; Dang, Qianyu; Paton, Stephanie M.; Clark, Duncan B.

2006-01-01

Tests of addiction treatments seldom reveal where treatment exercises its effect (i.e., promoting initial abstinence, preventing lapses, and/or impeding progression from lapse to relapse). The authors illustrate analyses distinguishing effects on these milestones in a randomized trial of high-dose nicotine patch (35 mg; n = 188) versus placebo (n…

Assessing Developmental Trajectories of Sexual Minority Youth: Discrepant Findings from a Life History Calendar and a Self-Administered Survey

ERIC Educational Resources Information Center

Fisher, Colleen M.

2012-01-01

Research suggests that the timing and sequence of sexual identity development milestones impact myriad health and mental health outcomes for sexual minority youth. Because these milestone events are typically assessed retrospectively, traditional data collection approaches are limited by recall bias and lack of precision in the recording of…

Early-Years Swimming: Creating Opportunities for Adding Mathematical Capital to Under 5s

ERIC Educational Resources Information Center

Jorgensen, Robyn

2013-01-01

Drawing on survey data from over 2000 parents, this paper explores the possibility of early-years swimming to add mathematical capital to young children. Using developmental milestones as the basis, it was found that parents reported significantly earlier achievement on many of these milestones. Such data suggest that the early years swim…

20 CFR 411.536 - Under what circumstances can we make a reconciliation payment under the outcome-milestone payment...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Under what circumstances can we make a reconciliation payment under the outcome-milestone payment system? 411.536 Section 411.536 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment...

20 CFR 411.536 - Under what circumstances can we make a reconciliation payment under the outcome-milestone payment...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Under what circumstances can we make a reconciliation payment under the outcome-milestone payment system? 411.536 Section 411.536 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment...

20 CFR 411.536 - Under what circumstances can we make a reconciliation payment under the outcome-milestone payment...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Under what circumstances can we make a reconciliation payment under the outcome-milestone payment system? 411.536 Section 411.536 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment...

20 CFR 411.540 - How are the payment amounts calculated for each of the milestones?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false How are the payment amounts calculated for each of the milestones? 411.540 Section 411.540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.540 How are the...

20 CFR 411.540 - How are the payment amounts calculated for each of the milestones?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false How are the payment amounts calculated for each of the milestones? 411.540 Section 411.540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.540 How are the...

20 CFR 411.540 - How are the payment amounts calculated for each of the milestones?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false How are the payment amounts calculated for each of the milestones? 411.540 Section 411.540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.540 How are the...

20 CFR 411.536 - Under what circumstances can we make a reconciliation payment under the outcome-milestone payment...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Under what circumstances can we make a reconciliation payment under the outcome-milestone payment system? 411.536 Section 411.536 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment...

20 CFR 411.540 - How are the payment amounts calculated for each of the milestones?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false How are the payment amounts calculated for each of the milestones? 411.540 Section 411.540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.540 How are the...

20 CFR 411.536 - Under what circumstances can we make a reconciliation payment under the outcome-milestone payment...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Under what circumstances can we make a reconciliation payment under the outcome-milestone payment system? 411.536 Section 411.536 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment...

20 CFR 411.540 - How are the payment amounts calculated for each of the milestones?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false How are the payment amounts calculated for each of the milestones? 411.540 Section 411.540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Employment Network Payment Systems § 411.540 How are the...

Images and Spectral Performance of WFC3 Interference Filters

NASA Technical Reports Server (NTRS)

Quijada, Manuel A.; Boucarut, R.; Telfer, R.; Baggett, S.; Quijano, J. Kim; Allen, George; Arsenovic, Peter

2006-01-01

The Wide Field Camera 3 (WFC3) is a panchromatic imager that will be deployed in the Hubble Space Telescope (HST). The mission of the WFC3 is to enhance HST1s imaging capability in the ultraviolet, visible and near-infrared spectral regions. Together with a wavelength coverage spanning 2000A to 1.7 micron, the WFC3 high sensitivity, high spatial resolution, and large field-of-view provide the astronomer with an unprecedented set of tools for exploring all types of exciting astrophysical terrain and for addressing many key questions in astronomy today. The filter compliment, which includes broad, medium, and narrow band filters, naturally reflects the diversity of astronomical programs to be targeted with WFC3. The WFC3 holds 61 UVIS filters elements, 14 IR filters, and 3 dispersive elements. During ground testing, the majority of the UVIS filters were found to exhibit excellent performance consistent with or exceeding expectations; however, a subset of filters showed considerable ghost images; some with relative intensity as high as 10-15%. Replacement filters with band-defining coatings that substantially reduce these ghost images were designed and procured. A state-of-the-art characterization setup was developed to measured the intensity of ghost images, focal shift, wedge direction , transmitted uniformity and surface feature of filters that could effect uniform flat field images. We will report on this new filter characterization methods, as well as the spectral performance measurements of the in-band transmittance and blocking.

Spectral and Wavefront Error Performance of WFIRST/AFTA Prototype Filters

NASA Technical Reports Server (NTRS)

Quijada, Manuel; Seide, Laurie; Marx, Cathy; Pasquale, Bert; McMann, Joseph; Hagopian, John; Dominguez, Margaret; Gong, Qian; Morey, Peter

2016-01-01

The Cycle 5 design baseline for the Wide-Field Infrared Survey Telescope Astrophysics Focused Telescope Assets (WFIRSTAFTA) instrument includes a single wide-field channel (WFC) instrument for both imaging and slit-less spectroscopy. The only routinely moving part during scientific observations for this wide-field channel is the element wheel (EW) assembly. This filter-wheel assembly will have 8 positions that will be populated with 6 bandpass filters, a blank position, and a Grism that will consist of a three-element assembly to disperse the full field with an undeviated central wavelength for galaxy redshift surveys. All filter elements in the EW assembly will be made out of fused silica substrates (110 mm diameter) that will have the appropriate bandpass coatings according to the filter designations (Z087, Y106, J129, H158, F184, W149 and Grism). This paper presents and discusses the performance (including spectral transmission and reflectedtransmitted wavefront error measurements) of a subset of bandpass filter coating prototypes that are based on the WFC instrument filter compliment. The bandpass coating prototypes that are tested in this effort correspond to the Z087, W149, and Grism filter elements. These filter coatings have been procured from three different vendors to assess the most challenging aspects in terms of the in-band throughput, out of band rejection (including the cut-on and cutoff slopes), and the impact the wavefront error distortions of these filter coatings will have on the imaging performance of the de-field channel in the WFIRSTAFTA observatory.

Relationship between cancer-related traumatic stress and family milestone achievement in adolescent and young adult survivors of childhood cancer.

PubMed

Tillery, Rachel; Beal, Sarah J; Thompson, Aimee N; Pai, Ahna L H

2018-06-01

Late physical and emotional effects of cancer treatment pose a burden for adolescent and young adult survivors of childhood cancer, including family milestone achievement. This brief report examined links between ongoing cancer-related post-traumatic stress symptoms (CR-PTSS) and family milestone achievement. Survivors (n = 51; M age  = 24.73, SD = 8.20) completed CR-PTSS and family formation questionnaires. Descriptive statistics, univariate parameter-constraints, and correlation analyses examined relations among study variables. Ongoing intrusive thoughts and hyperarousal were negatively linked to family identity development and family achievement. Findings from the present study provide support that ongoing CR-PTSS may be a barrier to family formation. © 2018 Wiley Periodicals, Inc.

Assessment Report Sandia National Laboratories Fuel Cycle Technologies Quality Assurance Evaluation of FY15 SNL FCT M2 Milestone Deliverables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appel, Gordon John

Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.

Level-2 Milestone 4797: Early Users on Max, Sequoia Visualization Cluster

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cupps, Kim C.

This report documents the fact that an early user has run successfully on Max, the Sequoia visualization cluster, ASC L2 milestone 4797: Early Users on Sequoia Visualization System (Max), due December 31, 2013. The Max visualization and data analysis cluster will provide Sequoia users with compute cycles and an interactive option for data exploration and analysis. The system will be integrated in the first quarter of FY14 and the system is expected to be moved to the classified network by the second quarter of FY14. The goal of this milestone is to have early users running their visualization and datamore » analysis work on the Max cluster on the classified network.« less

A physics-based crystallographic modeling framework for describing the thermal creep behavior of Fe-Cr alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wen, Wei; Capolungo, Laurent; Patra, Anirban

This Report addresses the Milestone M2MS-16LA0501032 of NEAMS Program (“Develop hardening model for FeCrAl cladding), with a deadline of 09/30/2016. Here we report a constitutive law for thermal creep of FeCrAl. This Report adds to and complements the one for Milestone M3MS-16LA0501034 (“Interface hardening models with MOOSE-BISON”), where we presented a hardening law for irradiated FeCrAl. The last component of our polycrystal-based constitutive behavior, namely, an irradiation creep model for FeCrAl, will be developed as part of the FY17 Milestones, and the three regimes will be coupled and interfaced with MOOSE-BISON.

Analysis of soft x-ray/VUV transmission characteristics of Si and Al filters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joseph, Aby; Modi, Mohammed H.; Singh, Amol

Ultrathin filters of Al (1500A) and Si (1200A) should exhibit more than 65% transmission above their Labsorption edges in the soft x-ray/vacuum ultra violet region(Si L-edge: 124 A and Al L-edge: 170 A). However, the measured transmission characteristics of these filters showed {approx}40% transmission. The transmission measurements of these filters were carried at the reflectivity beamline of Indus-1 synchrotron source out over a large wavelength range of 120-360A. In order to understand the measured transmission performance a detailed model fitting is performed using the Paratt formalism. It is found that the oxidation of the surface region of the filters ismore » responsible for the reduced transmission performance. Effects of higher harmonics of the toroidal grating monochromator are also considered in the data analysis.« less

Metal oxide/hydroxide-coated dual-media filter for simultaneous removal of bacteria and heavy metals from natural waters.

PubMed

Ahammed, M Mansoor; Meera, V

2010-09-15

The present study was conducted to compare the performance of a dual-media filter consisting of manganese oxide-coated (MOCS) and iron hydroxide-coated sand (IOCS) with that of IOCS filter and uncoated sand filter in treating water contaminated by microorganisms, heavy metals and turbidity with a view to its use in simple household water purification devices in developing countries. Long-duration column tests were conducted using two natural waters namely, roof-harvested rainwater and canal water. Performance of the filters showed that dual-media filter was more efficient in removing bacteria and heavy metals compared to IOCS filter, while uncoated sand filter showed very poor performance. The average effluent levels for dual-media filter when tested with rainwater were: turbidity 1.0+/-0.1 NTU; total coliforms 3+/-2 MPN/100 mL; heterotrophic plate count 170+/-20 CFU/mL; zinc 0.06+/-0.01 mg/L, while that for IOCS filter were: turbidity 1.0+/-0.1 NTU; total coliforms 4+/-2 MPN/100 mL; heterotrophic plate count 181+/-37 CFU/mL; zinc 0.20+/-0.07 mg/L. Similar results were obtained for canal water also. Up to 900 bed volumes (BV) could be treated without affecting the efficiency in the case of rainwater, while the filter operation had to be terminated after 500 BV due to excessive headloss in the case of canal water. The study thus showed the potential of the dual-media for use in low-cost household water filters for purification of natural waters. Copyright 2010 Elsevier B.V. All rights reserved.

Examination of pulverized waste recycled glass as filter media in slow sand filtration. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piccirillo, J.B.; Letterman, R.D.

1997-10-01

The purpose of this study was to investigate the pulverization of waste recycled glass to produce glass sand for slow sand filters. Pulverization experiments were performed using a fail mill pulverizer. The glass sand product from the pulverizer meets the size distribution requirements of ASTM-C-33 without size distribution adjustment. The size distribution must be adjusted to meet the grain size distribution requirements of the Ten States Standards and the USEPA for filter media used in slow sand filters. Pulverized glass that meet slow sand filter media specifications is an effective alternative to silica sand as a filter media for slowmore » sand filtration. Three pilot plant slow sand filters with glass sand filter media were compared to a fourth filter containing silica sand filter media. Over an 8 month period of continuous operation, the performance of the glass sand filter media was as good or better than the silica sands, with removals of 56% to 96% for turbidity; 99.78% to 100.0% for coliform bacteria; 99.995% to 99.997% for giardia cysts; 99.92% and 99.97% for cryptosporidium oocysts. Based on a cost-benefit analysis, converting waste glass into filter media may be economically advantageous for recycling facilities.« less

Milestones for Selection, Characterization, and Analysis of the Performance of a Repository for Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rechard, Robert P.

This report presents a concise history in tabular form of events leading up to site identification in 1978, site selection in 1987, subsequent characterization, and ongoing analysis through 2008 of the performance of a repository for spent nuclear fuel and high-level radioactive waste at Yucca Mountain in southern Nevada. The tabulated events generally occurred in five periods: (1) commitment to mined geologic disposal and identification of sites; (2) site selection and analysis, based on regional geologic characterization through literature and analogous data; (3) feasibility analysis demonstrating calculation procedures and importance of system components, based on rough measures of performance usingmore » surface exploration, waste process knowledge, and general laboratory experiments; (4) suitability analysis demonstrating viability of disposal system, based on environment-specific laboratory experiments, in-situ experiments, and underground disposal system characterization; and (5) compliance analysis, based on completed site-specific characterization. Because the relationship is important to understanding the evolution of the Yucca Mountain Project, the tabulation also shows the interaction between four broad categories of political bodies and government agencies/institutions: (a) technical milestones of the implementing institutions, (b) development of the regulatory requirements and related federal policy in laws and court decisions, (c) Presidential and agency directives and decisions, and (d) critiques of the Yucca Mountain Project and pertinent national and world events related to nuclear energy and radioactive waste.« less

Evolution of deep-bed filtration of engine exhaust particulates with trapped mass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Viswanathan, Sandeep; Rothamer, David A.; Foster, David E.

Micro-scale filtration experiments were performed on cordierite filter samples using particulate matter (PM) generated by a spark-ignition direct-injection (SIDI) engine fueled with tier II EEE certification gasoline. Size-resolved mass and number concentrations were obtained from several engine operating conditions. The resultant mass-mobility relationships showed weak dependence on the operating condition. An integrated particle size distribution (IPSD) method was used estimate the PM mass concentration in the exhaust stream from the SIDI engine and a heavy duty diesel (HDD) engine. The average estimated mass concentration between all conditions was ~77****** % of the gravimetric measurements performed on Teflon filters. Despite themore » relatively low elemental carbon fraction (~0.4 to 0.7), the IPSD mass for stoichiometric SIDI exhaust was ~83±38 % of the gravimetric measurement. Identical cordierite filter samples with properties representative of diesel particulate filters were sequentially loaded with PM from the different SIDI engine operating conditions, in order of increasing PM mass concentration. Simultaneous particle size distribution measurements upstream and downstream of the filter sample were used to evaluate filter performance evolution and the instantaneous trapped mass within the filter for two different filter face velocities. The evolution of filtration performance for the different samples was sensitive only to trapped mass, despite using PM from a wide range of operating conditions. Higher filtration velocity resulted in a more rapid shift in the most penetrating particle size towards smaller mobility diameters.« less

The performance of a sampled data delay lock loop implemented with a Kalman loop filter

NASA Astrophysics Data System (ADS)

Eilts, H. S.

1980-01-01

The purpose of this study is to evaluate the steady-state and transient (lock-up) performance of a tracking loop implemented with a Kalman filter. Steady-state performance criteria are errors due to measurement noise (jitter) and Doppler errors due to motion of the tracking loop. Trade-offs exist between the two criteria such that increasing performance with respect to either one will cause performance decrease with respect to the other. It is shown that by carefully selecting filter parameters reasonable performance can be obtained for both criteria simultaneously. It is also shown that lock-up performance for the loop is acceptable when these parameters are used.

Partial nitrification of non-ammonium-rich wastewater within biofilm filters under ambient temperature.

PubMed

Wang, Hongyu; He, Jiajie; Yang, Kai

2010-01-01

This study evaluated the partial nitrification performances of two biofilm filters over a synthetic non-ammonium-rich wastewater at a 20°C room temperature under both limited DO (∼2.0 mg/L) and unlimited DO (∼4.0 mg/L) conditions. The two filters were each of 80 cm long and used different biofilm carriers: activated carbon and ceramic granule. Results showed that partial nitrification was accomplished for both filters under the limited DO condition. However, the effluent NO(2)-N was higher in the ceramic granule filter than in the activated carbon filter, and was less susceptible to the influent COD/N changes. Further investigation into the water phase COD and NH(4)-N depth profiles and bacteria population within the two filters showed that by putting upper filter layer (upstream) to confront relatively higher influent COD/N ratios, the filtration process naturally put lower filter layers (downstream) relatively more favorable for nitrifying bacteria (ammonia oxidizing bacteria in this study) to prosper, making the filter depth left for nitrification a crucial factor for the effectiveness of nitrification with a filter. The potentially different porous flow velocities of the two filters might be the reason to cause their different partial nitrification performances, with a lower porous flow velocity (the ceramic granule filter) favoring partial nitrification more. In summation, DO, filter depth, and filtration speed should be played together to successfully operate a biofilm filter for partial nitrification.

Autonomous Correction of Sensor Data Applied to Building Technologies Using Filtering Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castello, Charles C; New, Joshua Ryan; Smith, Matt K

2013-01-01

Sensor data validity is extremely important in a number of applications, particularly building technologies where collected data are used to determine performance. An example of this is Oak Ridge National Laboratory s ZEBRAlliance research project, which consists of four single-family homes located in Oak Ridge, TN. The homes are outfitted with a total of 1,218 sensors to determine the performance of a variety of different technologies integrated within each home. Issues arise with such a large amount of sensors, such as missing or corrupt data. This paper aims to eliminate these problems using: (1) Kalman filtering and (2) linear predictionmore » filtering techniques. Five types of data are the focus of this paper: (1) temperature; (2) humidity; (3) energy consumption; (4) pressure; and (5) airflow. Simulations show the Kalman filtering method performed best in predicting temperature, humidity, pressure, and airflow data, while the linear prediction filtering method performed best with energy consumption data.« less

Follow-Up Study to Assess the Use and Performance of Household Filters in Zambia

PubMed Central

Peletz, Rachel; Simuyandi, Michelo; Simunyama, Martin; Sarenje, Kelvin; Kelly, Paul; Clasen, Thomas

2013-01-01

Effective household water treatment can improve drinking water quality and prevent disease if used correctly and consistently over time. One year after completion of a randomized controlled study of water filters among households in Zambia with children < 2 years old and mothers who were human immunodeficiency virus (HIV)-positive, we conducted a follow-up study to assess use and performance of new filters distributed at the conclusion of the study; 90% of participating households met the criteria for current users, and 75% of participating households had stored water with lower levels of fecal contamination than source water. Microbiologically, the filters continued to perform well, removing an average of 99.0% of fecal indicator bacteria. Although this study provides some encouraging evidence about the potential to maintain high uptake and filter performance, even in the absence of regular household visits, additional research is necessary to assess whether these results can be achieved over longer periods and with larger populations. PMID:24100635

Real-time 3D adaptive filtering for portable imaging systems

NASA Astrophysics Data System (ADS)

Bockenbach, Olivier; Ali, Murtaza; Wainwright, Ian; Nadeski, Mark

2015-03-01

Portable imaging devices have proven valuable for emergency medical services both in the field and hospital environments and are becoming more prevalent in clinical settings where the use of larger imaging machines is impractical. 3D adaptive filtering is one of the most advanced techniques aimed at noise reduction and feature enhancement, but is computationally very demanding and hence often not able to run with sufficient performance on a portable platform. In recent years, advanced multicore DSPs have been introduced that attain high processing performance while maintaining low levels of power dissipation. These processors enable the implementation of complex algorithms like 3D adaptive filtering, improving the image quality of portable medical imaging devices. In this study, the performance of a 3D adaptive filtering algorithm on a digital signal processor (DSP) is investigated. The performance is assessed by filtering a volume of size 512x256x128 voxels sampled at a pace of 10 MVoxels/sec.

An in-flight investigation of pilot-induced oscillation suppression filters during the fighter approach and landing task

NASA Technical Reports Server (NTRS)

Bailey, R. E.; Smith, R. E.

1982-01-01

An investigation of pilot-induced oscillation suppression (PIOS) filters was performed using the USAF/Flight Dynamics Laboratory variable stability NT-33 aircraft, modified and operated by Calspan. This program examined the effects of PIOS filtering on the longitudinal flying qualities of fighter aircraft during the visual approach and landing task. Forty evaluations were flown to test the effects of different PIOS filters. Although detailed analyses were not undertaken, the results indicate that PIOS filtering can improve the flying qualities of an otherwise unacceptable aircraft configuration (Level 3 flying qualities). However, the ability of the filters to suppress pilot-induced oscillations appears to be dependent upon the aircraft configuration characteristics. Further, the data show that the filters can adversely affect landing flying qualities if improperly designed. The data provide an excellent foundation from which detail analyses can be performed.

Arbitrary-shaped Brillouin microwave photonic filter by manipulating a directly modulated pump.

PubMed

Wei, Wei; Yi, Lilin; Jaouën, Yves; Hu, Weisheng

2017-10-15

We present a cost-effective gigahertz-wide arbitrary-shaped microwave photonic filter based on stimulated Brillouin scattering in fiber using a directly modulated laser (DML). After analyzing the relationship between the spectral power density and the modulation current of the DML, we manage to precisely adjust the optical spectrum of the DML, thereby controlling the Brillouin filter response arbitrarily for the first time, to the best of our knowledge. The filter performance is evaluated by amplifying a 500 Mb/s non-return-to-zero on-off keying signal using a 1 GHz rectangular filter. The comparison between the proposed DML approach and the previous approach adopting a complex IQ modulator shows similar filter flexibility, shape fidelity, and noise performance, proving that the DML-based Brillouin filter technique is a cost-effective and valid solution for microwave photonic applications.

High-latitude filtering in a global grid-point model using model normal modes. [Fourier filters for synoptic weather forecasting

NASA Technical Reports Server (NTRS)

Takacs, L. L.; Kalnay, E.; Navon, I. M.

1985-01-01

A normal modes expansion technique is applied to perform high latitude filtering in the GLAS fourth order global shallow water model with orography. The maximum permissible time step in the solution code is controlled by the frequency of the fastest propagating mode, which can be a gravity wave. Numerical methods are defined for filtering the data to identify the number of gravity modes to be included in the computations in order to obtain the appropriate zonal wavenumbers. The performances of the model with and without the filter, and with a time tendency and a prognostic field filter are tested with simulations of the Northern Hemisphere winter. The normal modes expansion technique is shown to leave the Rossby modes intact and permit 3-5 day predictions, a range not possible with the other high-latitude filters.

Correlation Filter Learning Toward Peak Strength for Visual Tracking.

PubMed

Sui, Yao; Wang, Guanghui; Zhang, Li

2018-04-01

This paper presents a novel visual tracking approach to correlation filter learning toward peak strength of correlation response. Previous methods leverage all features of the target and the immediate background to learn a correlation filter. Some features, however, may be distractive to tracking, like those from occlusion and local deformation, resulting in unstable tracking performance. This paper aims at solving this issue and proposes a novel algorithm to learn the correlation filter. The proposed approach, by imposing an elastic net constraint on the filter, can adaptively eliminate those distractive features in the correlation filtering. A new peak strength metric is proposed to measure the discriminative capability of the learned correlation filter. It is demonstrated that the proposed approach effectively strengthens the peak of the correlation response, leading to more discriminative performance than previous methods. Extensive experiments on a challenging visual tracking benchmark demonstrate that the proposed tracker outperforms most state-of-the-art methods.

Internal Structure and Morphology Profile in Optimizing Filter Membrane Performance

NASA Astrophysics Data System (ADS)

Sanaei, Pejman; Cummings, Linda J.

Membrane filters are in widespread use, and manufacturers have considerable interest in improving their performance, in terms of particle retention properties, and total throughput over the filter lifetime. A good question to ask is therefore: what is the optimal configuration of filter membranes, in terms of internal morphology (pore size and shape), to achieve the most efficient filtration? To answer this question, we must first propose a robust measure of filtration performance. As filtration occurs the membrane becomes blocked, or fouled, by the impurities in the feed solution, and any performance measure must take account of this. For example, one performance measure might be the total throughput (the volume of filtered feed solution) at the end of the filtration process, when the membrane is so badly blocked that it is deemed no longer functional. Here we present a simplified mathematical model, which (i) characterizes membrane internal pore structure via pore or permeability profiles in the depth of the membrane; (ii) accounts for various membrane fouling mechanisms (adsorption, blocking and cake formation); and (iv) predicts the optimum pore profile for our chosen performance measure. NSF DMS-1261596 and NSF DMS-1615719.

A Platform Across the Valley of Death: Tech Transition Via Open Enterprise Information System Development

DTIC Science & Technology

2014-09-01

using the COTS IT marketplace, and Defense enterprise PLA, to hold competition, perform AoA, do risk mitigating prototyping, pre- certifying useful...POR proceeds serially from “Research and Material Solution Analysis” through “Milestone A” (MS A) into “Technology Development” for risk reduction... risk reduction. Procurement funds are used generally to develop and manufacture delivered capability. Operations and Maintenance (O&M) funds are used

The 25 kW power module evolution study. Part 3: Conceptual designs for power module evolution. Volume 2: Program plans

NASA Technical Reports Server (NTRS)

1979-01-01

A plan is presented for the evolutionary development and deployment of the power module system with performance capabilities required to support the 1983 to 1990 user requirements. Aspects summarized include program functional, operational, and hardware elements; program work breakdown and specification items; development plans and schedules for developmental and technology milestones; test concepts and timeliness; and ground and orbit operations concepts.

An adaptive three-stage extended Kalman filter for nonlinear discrete-time system in presence of unknown inputs.

PubMed

Xiao, Mengli; Zhang, Yongbo; Wang, Zhihua; Fu, Huimin

2018-04-01

Considering the performances of conventional Kalman filter may seriously degrade when it suffers stochastic faults and unknown input, which is very common in engineering problems, a new type of adaptive three-stage extended Kalman filter (AThSEKF) is proposed to solve state and fault estimation in nonlinear discrete-time system under these conditions. The three-stage UV transformation and adaptive forgetting factor are introduced for derivation, and by comparing with the adaptive augmented state extended Kalman filter, it is proven to be uniformly asymptotically stable. Furthermore, the adaptive three-stage extended Kalman filter is applied to a two-dimensional radar tracking scenario to illustrate the effect, and the performance is compared with that of conventional three stage extended Kalman filter (ThSEKF) and the adaptive two-stage extended Kalman filter (ATEKF). The results show that the adaptive three-stage extended Kalman filter is more effective than these two filters when facing the nonlinear discrete-time systems with information of unknown inputs not perfectly known. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Implementation of a Parameterized Interacting Multiple Model Filter on an FPGA for Satellite Communications

NASA Technical Reports Server (NTRS)

Hackett, Timothy M.; Bilen, Sven G.; Ferreira, Paulo Victor R.; Wyglinski, Alexander M.; Reinhart, Richard C.

2016-01-01

In a communications channel, the space environment between a spacecraft and an Earth ground station can potentially cause the loss of a data link or at least degrade its performance due to atmospheric effects, shadowing, multipath, or other impairments. In adaptive and coded modulation, the signal power level at the receiver can be used in order to choose a modulation-coding technique that maximizes throughput while meeting bit error rate (BER) and other performance requirements. It is the goal of this research to implement a generalized interacting multiple model (IMM) filter based on Kalman filters for improved received power estimation on software-dened radio (SDR) technology for satellite communications applications. The IMM filter has been implemented in Verilog consisting of a customizable bank of Kalman filters for choosing between performance and resource utilization. Each Kalman filter can be implemented using either solely a Schur complement module (for high area efficiency) or with Schur complement, matrix multiplication, and matrix addition modules (for high performance). These modules were simulated and synthesized for the Virtex II platform on the JPL Radio Experimenter Development System (EDS) at NASA Glenn Research Center. The results for simulation, synthesis, and hardware testing are presented.

Hydraulic modeling of clay ceramic water filters for point-of-use water treatment.

PubMed

Schweitzer, Ryan W; Cunningham, Jeffrey A; Mihelcic, James R

2013-01-02

The acceptability of ceramic filters for point-of-use water treatment depends not only on the quality of the filtered water, but also on the quantity of water the filters can produce. This paper presents two mathematical models for the hydraulic performance of ceramic water filters under typical usage. A model is developed for two common filter geometries: paraboloid- and frustum-shaped. Both models are calibrated and evaluated by comparison to experimental data. The hydraulic models are able to predict the following parameters as functions of time: water level in the filter (h), instantaneous volumetric flow rate of filtrate (Q), and cumulative volume of water produced (V). The models' utility is demonstrated by applying them to estimate how the volume of water produced depends on factors such as the filter shape and the frequency of filling. Both models predict that the volume of water produced can be increased by about 45% if users refill the filter three times per day versus only once per day. Also, the models predict that filter geometry affects the volume of water produced: for two filters with equal volume, equal wall thickness, and equal hydraulic conductivity, a filter that is tall and thin will produce as much as 25% more water than one which is shallow and wide. We suggest that the models can be used as tools to help optimize filter performance.

A novel test method to determine the filter material service life of decentralized systems treating runoff from traffic areas.

PubMed

Huber, Maximilian; Welker, Antje; Dierschke, Martina; Drewes, Jörg E; Helmreich, Brigitte

2016-09-01

In recent years, there has been a significant increase in the development and application of technical decentralized filter systems for the treatment of runoff from traffic areas. However, there are still many uncertainties regarding the service life and the performance of filter materials that are employed in decentralized treatment systems. These filter media are designed to prevent the transport of pollutants into the environment. A novel pilot-scale test method was developed to determine - within a few days - the service lives and long-term removal efficiencies for dissolved heavy metals in stormwater treatment systems. The proposed method consists of several steps including preloading the filter media in a pilot-scale model with copper and zinc by a load of n-1 years of the estimated service life (n). Subsequently, three representative rain events are simulated to evaluate the long-term performance by dissolved copper and zinc during the last year of application. The presented results, which verified the applicability of this method, were obtained for three filter channel systems and six filter shaft systems. The performance of the evaluated systems varied largely for both tested heavy metals and during all three simulated rain events. A validation of the pilot-scale assessment method with field measurements was also performed for two systems. Findings of this study suggest that this novel method does provide a standardized and accurate estimation of service intervals of decentralized treatment systems employing various filter materials. The method also provides regulatory authorities, designers, and operators with an objective basis for performance assessment and supports stormwater managers to make decisions for the installation of such decentralized treatment systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

Filter aids influence on pressure drop across a filtration system

NASA Astrophysics Data System (ADS)

Hajar, S.; Rashid, M.; Nurnadia, A.; Ammar, M. R.; Hasfalina, C. M.

2017-06-01

Filter aids is commonly used to reduce pressure drop across air filtration system as it helps to increase the efficiency of filtration of accumulated filter cake. Filtration velocity is one of the main parameters that affect the performance of filter aids material. In this study, a formulated filter aids consisting of PreKot™ and activated carbon mixture (designated as PrekotAC) was tested on PTFE filter media under various filtration velocities of 5, 6, and 8 m/min at a constant material loading of 0.2 mg/mm2. Results showed that pressure drop is highly influenced by filtration velocity where higher filtration velocity leads to a higher pressure drop across the filter cake. It was found that PrekotAC performed better in terms of reducing the pressure drop across the filter cake even at the highest filtration velocity. The diversity in different particle size distribution of non-uniform particle size in the formulated PrekotAC mixture presents a higher permeability causes a lower pressure drop across the accumulated filter cake. The finding suggests that PrekotAC is a promising filter aids material that helps reducing the pressure drop across fabric filtration system.