King County Metro Transit Hybrid Articulated Buses: Final Evaluation Results
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chandler, K.; Walkowicz, K.
2006-12-01
Final technical report compares and evaluates new diesel and diesel hybrid-electric articulated buses operated as part of the King County Metro Transit (KC Metro) fleet in Seattle, Washington. The evaluation lasted 12 months.
ERIC Educational Resources Information Center
Vocational Evaluation and Work Adjustment Association, Washington, DC.
The first of three parts of the Vocational Evaluation Project final report contains an editorial, two task force reports, and brief summaries of the seven task force reports which comprise the final report. The editorial summarizes the project's purpose, its activities for the three years of its existence, and its results, and describes the task…
ERIC Educational Resources Information Center
Midlands Consortium.
The reports presented in this document describe the results of the first 2 years of the Midlands Consortium Star Schools Project (MCSSP) (October 1, 1988-December 31, 1990). The first report summarizes the major accomplishments of the MCSSP, including: (1) the installation of communications satellites at schools in Alabama, Kansas, Mississippi,…
ERIC Educational Resources Information Center
Stenner, A. Jackson; And Others
This document contains the second of five volumes reporting the activities and results of a career education evaluation project conducted to accomplish the following two objectives: (1) to improve the quality of evaluations by career education projects funded by the United States Office of Career Education (OCE) through the provision of technical…
14 CFR 1214.1105 - Final ranking.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Recruitment and Selection Program § 1214.1105 Final ranking. Final rankings will be based on a combination of the selection board's initial evaluations and the results of the interview process. Veteran's...
Evaluation of New York state's mandatory occupant restraint law. Volume 6, Final summary report
DOT National Transportation Integrated Search
1987-02-01
This is the final report summarizing the evaluation of the first year of New York State's Mandatory Occupant Restraint Law. The results indicate that the major goals of the legislation were accomplished. Safety restraint use among front seat occupant...
Technical Evaluation Motor No. 10 (TEM-10)
NASA Technical Reports Server (NTRS)
1993-01-01
Technical Evaluation Motor No. 10 (TEM-10) was static fired on 27 Apr. 1993 at the Thiokol Corporation full-scale motor static test bay, T-24. This final test report documents the procedures, performance, and results of the static test firing of TEM-10. All observations, discussions, conclusions, and recommendations contained are final. Included is a presentation and discussion of TEM-10 performance, anomalies, and test results in concurrence with the objectives outlined in CTP-0110, Revision D, Space Shuttle Technical Evaluation Motor No. 10 (TEM-10) Static Fire Test Plan.
Influence of Gender and Other Factors to Final Grade
ERIC Educational Resources Information Center
Domeova, Ludmila; Jindrova, Andrea; Fejfar, Jiri
2015-01-01
The study focused on the relations between the partial evaluation and the final grade. The investigation has been done on a group of 269 students of the Czech University of Life Sciences in Prague, in the course of Mathematical Methods, who have to go through a strictly defined evaluation scheme. The results of statistical analysis confirmed that…
Workplace Literacy Program (WPL) at Chinatown Manpower Project, Inc. Final Evaluation.
ERIC Educational Resources Information Center
Friedenberg, Joan E.
This document describes the procedures for and results of the external evaluation of the workplace literacy program for underemployed garment industry workers with low English skills at Chinatown Manpower Project, Inc. in Chinatown in New York City. The document describes the evaluation design and methodology as well as the evaluation results,…
Formative Evaluation of the Adult Learning, Literacy and Essential Skills Program. Final Report
ERIC Educational Resources Information Center
Human Resources and Skills Development Canada, 2010
2010-01-01
This report presents the results of the formative evaluation of the Adult Learning, Literacy and Essential Skills Program (ALLESP). Data collection related to this evaluation took place between November 2008 and May 2009. The evaluation resulted in the following four recommendations: (1) It is recommended that Program objectives and activities…
Technical Evaluation Motor No. 7 (TEM-7)
NASA Technical Reports Server (NTRS)
Hughes, Phil
1991-01-01
The Technical Evaluation Motor No. 7 (TEM-7) test was a full-scale, full duration static test firing of a high performance motor-configuration solid rocket motor with nozzle vectoring. The final test report documents the procedures, performance, and results of the static test firing of TEM-7. All observations, discussions, conclusions, and recommendations included in the report are complete and final except for the TEM-7 fixed housing unbond investigation. A presentation and discussion of TEM-7 performance, anomalies, and test result concurrence with the objectives outlined in CTP-0107, Rev A, Space Shuttle Technical Evaluation Motor No. 7 (TEM-7) Static Fire Test Plan are included.
Hyperspectral image segmentation using a cooperative nonparametric approach
NASA Astrophysics Data System (ADS)
Taher, Akar; Chehdi, Kacem; Cariou, Claude
2013-10-01
In this paper a new unsupervised nonparametric cooperative and adaptive hyperspectral image segmentation approach is presented. The hyperspectral images are partitioned band by band in parallel and intermediate classification results are evaluated and fused, to get the final segmentation result. Two unsupervised nonparametric segmentation methods are used in parallel cooperation, namely the Fuzzy C-means (FCM) method, and the Linde-Buzo-Gray (LBG) algorithm, to segment each band of the image. The originality of the approach relies firstly on its local adaptation to the type of regions in an image (textured, non-textured), and secondly on the introduction of several levels of evaluation and validation of intermediate segmentation results before obtaining the final partitioning of the image. For the management of similar or conflicting results issued from the two classification methods, we gradually introduced various assessment steps that exploit the information of each spectral band and its adjacent bands, and finally the information of all the spectral bands. In our approach, the detected textured and non-textured regions are treated separately from feature extraction step, up to the final classification results. This approach was first evaluated on a large number of monocomponent images constructed from the Brodatz album. Then it was evaluated on two real applications using a respectively multispectral image for Cedar trees detection in the region of Baabdat (Lebanon) and a hyperspectral image for identification of invasive and non invasive vegetation in the region of Cieza (Spain). A correct classification rate (CCR) for the first application is over 97% and for the second application the average correct classification rate (ACCR) is over 99%.
Highway Vehicle Retrofit Evaluation : Phase 2. Report. Testing and Final Evaluation Results.
DOT National Transportation Integrated Search
1976-11-01
This report presents the results of engine dynamometer and vehicle chassis dynamometer tests conducted with selected automotive retrofit devices in the classes of ultrasonic carburetors, high-velocity intake manifolds, tuned exhaust systems, and high...
ERIC Educational Resources Information Center
Koralek, Robin; Johnson, Heidi; Ratcliffe, Caroline; Vericker, Tracy
2010-01-01
This report presents the final results for the evaluation of the New Americans Centers (NACs) demonstration project in Arkansas and Iowa. It focuses on program operations and plans for program sustainability, while highlighting services provided through the demonstration projects in Arkansas and Iowa. It also documents outcomes for New Iowan…
Constructing and Evaluating a Validity Argument for the Final-Year Ward Simulation Exercise
ERIC Educational Resources Information Center
Till, Hettie; Ker, Jean; Myford, Carol; Stirling, Kevin; Mires, Gary
2015-01-01
The authors report final-year ward simulation data from the University of Dundee Medical School. Faculty who designed this assessment intend for the final score to represent an individual senior medical student's level of clinical performance. The results are included in each student's portfolio as one source of evidence of the student's…
Evaluation of infrared brake screening technology : final report & appendices
DOT National Transportation Integrated Search
2000-12-01
This report documents the results of a field evaluation of the InfraRed Inspection System (IRISystem). The objective of the evaluation was to determine the effectiveness of the IRISystem in enhancing the screening of commercial motor vehicles (CMVs) ...
Operational test results of the passive final approach spacing tool
DOT National Transportation Integrated Search
1997-06-01
A prototype decision support tool for terminal area air traffic controllers, : referred to as the Final Approach Spacing Tool (FAST), was recently evaluated in : operation with live air traffic at the Dallas/Fort Worth, Texas Airport, : Controllers u...
Effect of the Polishing Procedures on Color Stability and Surface Roughness of Composite Resins
Schmitt, Vera Lucia; Puppin-Rontani, Regina Maria; Naufel, Fabiana Scarparo; Nahsan, Flávia Pardo Salata; Alexandre Coelho Sinhoreti, Mário; Baseggio, Wagner
2011-01-01
Objectives. To evaluate the polishing procedures effect on color stability and surface roughness of composite resins. Methods. Specimens were distributed into 6 groups: G1: Filtek Supreme XT + PoGo; G2: Filtek Supreme XT + Sof-Lex; G3: Filtek Supreme XT + no polishing; G4: Amelogen + PoGo; G5: Amelogen + Sof-Lex.; G6: Amelogen + no polishing. Initial color values were evaluated using the CIELab scale. After polishing, surface roughness was evaluated and the specimens were stored in coffee solution at 37°C for 7 days. The final color measurement and roughness were determined. Results. Sof-Lex resulted in lower staining. Amelogen showed the highest roughness values than Filtek Supreme on baseline and final evaluations regardless of the polishing technique. Filtek Supreme polished with PoGo showed the lowest roughness values. All groups presented discoloration after storage in coffee solution, regardless of the polishing technique. Conclusion. Multiple-step polishing technique provided lower degree of discoloration for both composite resins. The final surface texture is material and technique dependent. PMID:21991483
ERIC Educational Resources Information Center
Theberge, Raymond
An evaluation of Manitoba's French immersion programs at the levels of grades 3, 6, and 9 focused on program effectiveness in teaching listening comprehension and speech skills. The results for grade 6 are presented here. The first section describes the framework of the immersion curriculum and the listening and oral skills targeted in it. The…
Ayala-Mejias, Juan Diego; Garcia-Gonzalez, Benjamin; Alcocer-Perez-España, Luis; Villafañe, Jorge Hugo; Berjano, Pedro
2017-07-01
To evaluate the relationship between tunnel position and widening and long-term clinical results in anterior cruciate ligament (ACL) reconstruction, a retrospective cohort of 30 patients undergoing ACL reconstruction with double semitendinous plus double gracilis (SAC technique) with longer than 10-year follow-up was selected. CT scans in the first 3 months and at final follow-up was evaluated. Position, angle, and widening of tunnels including Nebelung criteria were recorded in all CT scans. Physical, KT-1000, and clinical evaluation were performed at final follow-up. Outcomes and knee arthritis severity were evaluated at final follow-up. Mean follow-up was 11.2 ± 1.2. At final follow-up, 85 and 57% of tibial and femoral tunnels, respectively, developed some degree of enlargement. Frontal tibial angle (mean) was 72°, sagittal tibial angle 63°, frontal femoral angle 47°, sagittal femoral angle 20°, and tunnels divergence angle 36°. Preoperatively, KT-1000 30L and Lachman test scores were 5.52 and 5.79 respectively. In the last follow-up, 30L and manual Lachman test scores were 0.97 and 1.13, respectively ( p < 0.001). In IKDC scale, pivot shift and Jerk tests showed 83 and 84% grade A results, respectively ( p < 0.0001). In Fairbank scale, 23% worsened one grade and 27% worsened more than one grade ( p < 0.005). Tibial tunnels widened more than femoral tunnels and further dilatation was found between intermediate and final follow-up. Higher incidence of tibial tunnel widening was observed in patients with tunnel verticalization. Tibial tunnel dilation was associated with long-term degenerative changes but not with final knee instability. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.
Evaluation Strategies for EWP Programs: A Marketing Perspective.
ERIC Educational Resources Information Center
Turkewych, Christine
1986-01-01
Describes how evaluation strategies can be implemented to increase the effectiveness of English in the Work Place programs. Discusses the design and implementation of the strategy, how to analyze its results and produce a final report, and ways to get the results used. (SED)
Evaluation of a nuclear asphalt content gage : final report.
DOT National Transportation Integrated Search
1970-01-01
The Troxler Model 2226 asphalt content gauge was evaluated in the laboratory and taken into the field where its results were compared to conventional reflux values. The precision as evaluated in the laboratory was found to be excellent - equivalent t...
Evaluation of experimental installation of silane treatment on bridges : final report.
DOT National Transportation Integrated Search
1988-04-01
In this project the effectiveness of silane-based chemicals as concrete sealants was evaluated for selected bridges throughout the state of Louisiana for a five-year period. The field evaluation was initiated after satisfactory results in the laborat...
TRANSMIT system evaluation : final report
DOT National Transportation Integrated Search
1998-06-30
This report presents the evaluation results of TRANSCOMs System for Managing Incidents and Traffic (TRANSMIT). The TRANSMIT system utilizes Electronic Toll and Traffic Management (ETTM) equipment, which is compatible with the E-Z Pass system, for ...
Flight set 360L007 (STS-33) insulation component. Volume 3: Final release
NASA Technical Reports Server (NTRS)
Hicken, Steve
1990-01-01
Volume 3 of this postfire report deals with the insulation component of the RSRM. The report is released twice for each flight set. The interim release contract date is on or before 60 days after the last field joint or nozzle to case joint is disassembled at KSC and contain the results of the KSC visual evaluation. The data contained in Volume 3 interim release supersedes the insulation data presented in the KSC 10 day report. The final release contract data is on or before 60 days after the last factory joint is disassembled at the Clearfield H-7 facility and contains the results of all visual evaluations and a thermal safety factor analysis. The data contained in the Volume 3 final release supersedes the interim release and the insulation data presented in the Clearfield 10 day report.
Mariano Lake Mine: Technical Reports
This Final Removal Site Evaluation describes the objectives, work performed, and results of a Removal Site Evaluation (RSE) at the Mariano Lake Mine, which was performed by ARCADIS U.S., Inc. on behalf of Chevron Environmental Management Company.
DOT National Transportation Integrated Search
2016-08-01
The Federal Railroad Administration (FRA), Transportation Technology Center, Inc. (TTCI), and rail industry participants have : performed probability of detection (POD) assessments to evaluate nondestructive testing (NDT) technologies, which are : pr...
Evaluation of experimental rumble strips : 1982-1986 : final report.
DOT National Transportation Integrated Search
1987-07-01
This report was prepared to provide the results of evaluations conducted upon twenty-six roadways where rumble strips were installed experimentally in Louisiana between August 1982 and September 1984. Situated randomly throughout Louisiana, construct...
Language of Evaluation: How PLA Evaluators Write about Student Learning
ERIC Educational Resources Information Center
Travers, Nan L.; Smith, Bernard; Ellis, Leslie; Brady, Tom; Feldman, Liza; Hakim, Kameyla; Onta, Bhuwan; Panayotou, Maria; Seamans, Laurie; Treadwell, Amanda
2011-01-01
Very few studies (e.g., Arnold, 1998; Joosten-ten Brinke, et al., 2009) have examined the ways in which evaluators assess students' prior learning. This investigation explored the ways that evaluators described students' prior learning in final assessment reports at a single, multiple-location institution. Results found four themes; audience,…
Simunovic, Nicole; Walter, Stephen; Devereaux, P J; Sprague, Sheila; Guyatt, Gordon H; Schemitsch, Emil; Tornetta, Paul; Sanders, David; Swiontkowski, Marc; Bhandari, Mohit
2011-09-01
To evaluate how the size of an outcome adjudication committee, and the potential for dominance among its members, potentially impacts a trial's results. We conducted a retrospective analysis of data from the six-member adjudication committee in the Study to Prospectively Evaluate Reamed Intramedullary Nails in Patients with Tibial Fractures (SPRINT) Trial. We modeled the adjudication process, predicted the results and costs if smaller committees had been used, and tested for the presence of a dominant adjudicator. Use of smaller committee sizes (one to five members) would have had little impact on the final study results, although one analysis suggested that the benefit in reduction of reoperations with reamed nails in closed tibial fractures would have lost significance if committee sizes of three or less were used. We identified a significant difference between adjudicators in the number of times their original minority decisions became the final consensus decision (χ(2)=9.67, P=0.046), suggesting that dominant adjudicators were present. However, their impact on the final study results was trivial. Reducing the number of adjudicators from six to four would have led to little change in the final SPRINT study results irrespective of the significance of the original trial results, demonstrating the potential for savings in trial resources. Copyright © 2011 Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Abdelaziz, Omar; Shrestha, Som S.; Munk, Jeffrey D.
The Oak Ridge National Laboratory (ORNL) High-Ambient-Temperature Evaluation Program for low– global warming potential (Low-GWP) Refrigerants aims to develop an understanding of the performance of low-GWP alternative refrigerants to hydrochlorofluorocarbon (HCFC) and hydrofluorocarbon (HFC) refrigerants in mini-split air conditioners under high-ambient-temperature conditions. This final report describes the parties involved, the alternative refrigerant selection process, the test procedures, and the final results.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-25
... Projects has prepared an Final Environmental Assessment (FEA) for an application filed by the Penobscot... Comprehensive Settlement Agreement. The FEA evaluates the environmental impacts that would result from approving the licensee's proposed surrenders. The FEA finds that approval of the application would not...
Evaluation of epoxy compounds as a material for patching and protecting concrete : final report.
DOT National Transportation Integrated Search
1971-01-01
The final report summarizes the results of a study of the use of epoxy compounds in the shallow surface repair and sealing of concrete bridge decks. The research effort concentrated on the use of epoxy resin systems as bonded overlays and included ev...
Independent evaluation of the transit retrofit package safety applications : final report.
DOT National Transportation Integrated Search
2015-02-01
This report presents the methodology and results of the independent evaluation of retrofit safety packages installed on transit vehicles in the : Safety Pilot Model Deploymentpart of the United States Department of Transportations Intelligent T...
Evaluation of concrete pavement patching techniques.
DOT National Transportation Integrated Search
1989-01-01
This final report presents the results of a study undertaken to improve in concrete pavement patching techniques. Activities included an evaluation of the suitability of the impact hammer and maturity calculations for determining when a patch is read...
[Evaluation of preliminary grades and credits in nurse training programs].
Darmann-Finck, Ingrid; Duveneck, Nicole
2016-01-01
In the federal state of Bremen preliminary grades were included to the extent of 25 % in written, oral and practical final grades during the time period 2009-2014. The evaluation focuses on the effects of preliminary grades on the scale of final grades and the performance of learners as well as on the assessment of the appropriateness of final grades. A mixed-methods design was employed that consisted of a quasi-experimental study comprising of surveys of students and teachers of comparative and model courses as well as a qualitative study using group discussions. The results confirm that preliminary grades lead to a minimal improvement of the final grades of some exclusively low-achieving students. The assessment of appropriateness hardly changed. From both learners' and teachers' point of view there is still great dissatisfaction concerning the practical final grades. With regard to learning habits an increased willingness to learn new skills on the one hand and a partly increased performance pressure on the other hand were demonstrated. On the basis of these research results, the authors recommend the regular introduction of preliminary marks into the nursing training. Copyright © 2016. Published by Elsevier GmbH.
DOT National Transportation Integrated Search
2009-08-31
This report presents the results of the United States Department of Transportation evaluation of a federally funded earmark project implemented by the Area Transportation Authority of North Central Pennsylvania (ATA). The project implemented a suite ...
1981-1982 Evaluation Findings.
ERIC Educational Resources Information Center
Austin Independent School District, TX. Office of Research and Evaluation.
The findings in evaluation and testing activities of the Austin Independent School District (AISD) during the 1981-82 school year are summarized. The first section, "1982 at a Glance," discusses the evaluation findings as a whole. Final reports and abstracts of related reports on achievement test results are presented for the district…
Dipping Your Toes into Evaluation in Five Easy Steps: Tips, Tricks, and Lessons Learned
NASA Astrophysics Data System (ADS)
Martin, A. M.
2013-04-01
With limited funding, staffing, and resources for STEM education projects, the push for rigorous evaluation of our efforts offers up significant challenges, but opportunities as well. Evaluative thinking can enrich and improve the entire life cycle of an education, communication, or outreach project, and can take many forms other than a final, summative evaluation report. The community of attendees at the Astronomical Society of the Pacific will share an abundance of evaluation expertise, approaches, and results, but where does one turn if evaluation is a new concept or responsibility? This session will briefly highlight five tips, tricks, and lessons learned from the perspective of a novice and from a NASA project new to evaluation. The resources and ideas shared in the session will represent the concrete advice and driving ideas that put the author on firmer evaluative footing. Themes explored will include: (1) strategies for incorporating evaluative thinking early in the development of a project and throughout its life cycle; (2) the benefit of taking the time to elucidate a program's logic model of theory of action; (3) linking program activities to outcomes that are SMART (specific, measurable, attainable, relevant, and timely); (4) working with an external or internal evaluator; and (5) taking evaluation beyond the formal, final report. Finally, we'll close with resources to help individuals and their organizations learn more about evaluation and build their evaluation capacity.
A laboratory evaluation of rubber-asphalt paving mixtures : final report.
DOT National Transportation Integrated Search
1974-06-01
The primary objective of this study was to evaluate rubber additive asphalt and its aggregate mixtures in the laboratory with respect to their physical characteristics. : Results obtained on the physical properties of the rubberized asphalt binder we...
Bringing English to Order: A Personal Account of the NCC English Evaluation Project.
ERIC Educational Resources Information Center
Clark, Urszula
1994-01-01
Provides a personal account of Great Britain's National Curriculum Committee's English Evaluation Project based at Warwick University. Describes the way the interim and final results of the committee were used by higher powers. (HB)
Evaluation of Stainless Steel Reinforcement in Bridge Decks.
DOT National Transportation Integrated Search
2007-10-01
This report is a follow up and final report to the report on the Evaluation of Stainless Steel Reinforcement, Construction Report. RDT 03 003. The results of interim testing during the bridges first five years are reported for Missouris...
HUMAN DEVELOPMENT PROJECT, 1965-1966. FINAL REPORT.
ERIC Educational Resources Information Center
Richmond Public Schools, VA.
THIS FINAL REPORT IS AN EVALUATION OF A COMPENSATORY EDUCATION PROJECT IN RICHMOND, VIRGINIA. DATA ARE DERIVED FROM TEACHERS' RESPONSES TO A QUESTIONNAIRE, FROM A REPORT ON THE ACADEMIC PERFORMANCE OF PUPILS IN THE 1965 SUMMER PROGRAM, AND FROM AN ANALYSIS OF STANDARDIZED ACHIEVEMENT TEST RESULTS IN EXPERIMENTAL AND CONTROL SCHOOLS. THE REPORT…
Li, Yan
2017-05-25
The efficiency evaluation model of integrated energy system, involving many influencing factors, and the attribute values are heterogeneous and non-deterministic, usually cannot give specific numerical or accurate probability distribution characteristics, making the final evaluation result deviation. According to the characteristics of the integrated energy system, a hybrid multi-attribute decision-making model is constructed. The evaluation model considers the decision maker's risk preference. In the evaluation of the efficiency of the integrated energy system, the evaluation value of some evaluation indexes is linguistic value, or the evaluation value of the evaluation experts is not consistent. These reasons lead to ambiguity in the decision information, usually in the form of uncertain linguistic values and numerical interval values. In this paper, the risk preference of decision maker is considered when constructing the evaluation model. Interval-valued multiple-attribute decision-making method and fuzzy linguistic multiple-attribute decision-making model are proposed. Finally, the mathematical model of efficiency evaluation of integrated energy system is constructed.
Transit signal priority systems application and technology investigation : final report, March 2009.
DOT National Transportation Integrated Search
2009-03-01
This report describes the process and results of research to develop an evaluation process that will : assist NJ Transit in quickly determining which intersections are good candidates for Transit Signal : Priority (TSP). This evaluation process is ap...
Statewide intelligent transportation systems earmark evaluation. Part B, final report
DOT National Transportation Integrated Search
2003-11-01
As a recipient of Intelligent Transportation System (ITS) Integration Program funds, the Wisconsin Department of Transportation is required to perform a self-evaluation on each program supported by the funds. The report includes the results of that e...
Metropolitan Model Deployment Initiative : San Antonio Evaluation Report : Final Draft
DOT National Transportation Integrated Search
2000-05-01
This report presents the evaluation results of the San Antonio, Texas Metropolitan Model Deployment Initiative (MMDI). The San Antonio MMDI sought to make improvements in six key transportation goals. The first of these goals was the expansion and st...
Apollo 15 mission report, supplement 4: Descent propulsion system final flight evaluation
NASA Technical Reports Server (NTRS)
Avvenire, A. T.; Wood, S. C.
1972-01-01
The results of a postflight analysis of the LM-10 Descent Propulsion System (DPS) during the Apollo 15 Mission are reported. The analysis determined the steady state performance of the DPS during the descent phase of the manned lunar landing. Flight measurement discrepancies are discussed. Simulated throttle performance results are cited along with overall performance results. Evaluations of the propellant quantity gaging system, propellant loading, pressurization system, and engine are reported. Graphic illustrations of the evaluations are included.
Transitional Class Program, 1979-80. OEE Evaluation Report.
ERIC Educational Resources Information Center
Opperman, Prudence Ward; And Others
This evaluation report describes the implementation and results of the 1979-80 Transitional Class Program. Although the program no longer exists as a centrally-coordinated effort, it serves as a final summary of the program's two years of operation by comparing the results from one year (1978-1979) to the next (1979-1980), and provides guidance to…
Formative Evaluation of the Canada Student Loans Program. Final Report
ERIC Educational Resources Information Center
Human Resources and Skills Development Canada, 2004
2004-01-01
The "Formative Evaluation of the Canada Student Loans Program" was undertaken to assess issues of program relevance, design and delivery and for the purposes of examining the early impacts of changes made to the program since 1998. The evaluation also reviewed the Performance Measurement Strategy contained in the July 2002 Results-Based…
DOT National Transportation Integrated Search
2010-12-01
This report presents the results for the national evaluation of the FY 2003 Earmarked ITS Integration Project: Southern Wyoming, I-80 Dynamic Message Signs. The I-80 Dynamic Message Signs project is a rural infrastructure deployment of ITS devices th...
NASA Technical Reports Server (NTRS)
1982-01-01
The Final ACT Configuration Evaluation Task of the Integrated Application of Active Controls (IAAC) technology project within the energy efficient transport program is summarized. The Final ACT Configuration, through application of Active Controls Technology (ACT) in combination with increased wing span, exhibits significant performance improvements over the conventional baseline configuration. At the design range for these configurations, 3590 km, the block fuel used is 10% less for the Final ACT Configuration, with significant reductions in fuel usage at all operational ranges. Results of this improved fuel usage and additional system and airframe costs and the complexity required to achieve it were analyzed to determine its economic effects. For a 926 km mission, the incremental return on investment is nearly 25% at 1980 fuel prices. For longer range missions or increased fuel prices, the return is greater. The technical risks encountered in the Final ACT Configuration design and the research and development effort required to reduce these risks to levels acceptable for commercial airplane design are identified.
ERIC Educational Resources Information Center
Austin Independent School District, TX. Office of Research and Evaluation.
The Austin Independent School District received an Elementary and Secondary Education Act Title III grant in 1973 to develop an internal research and evaluation capability. Funding was provided the resulting Office of Research and Evaluation (ORE) for three years. The foci of the original grant were (1) to develop a district evaluation model, (2)…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Berney, R.E.; Butcher, W.R.; Carter, L.F.
1977-01-01
This summary report identifies potential energy conservation measures and evaluates measures and policy options not likely to be suitable for adoption in the Pacific Northwest. Potential and incentives for energy conservation are specifically identified in the residential, commercial, industrial, and transportation sectors and through urban design. Selection of preferable policies and estimation of response to policies are next discussed. Finally, a computer impact model for calculating energy savings and changes in the levels of residuals resulting from energy conservation activities is discussed. (MCW)
Evaluation of the Mack Intelligent Vehicle Field Operational Test: September 2006
DOT National Transportation Integrated Search
2006-09-01
This report presents the final results of an independent evaluation of the U.S. Department of Transportation (USDOT) Mack Intelligent Vehicle Initiative (IVI) Field Operational Test (FOT). The IVI is a cooperative effort to conduct FOTs of advanced i...
Road usage charge pilot project final evaluation report for Washington State participants.
DOT National Transportation Integrated Search
2013-05-01
This report provides a summary of evaluation results of Washingtons participation in : the Road Usage Charge Pilot Program (RUCPP). The RUCPP was a trial of various : approaches and technologies for motorists in the States of Washington, Oregon, a...
Side Object Detection Systems Evaluation : Final Evaluation Report.
DOT National Transportation Integrated Search
2008-12-15
Nearly 46 percent of bus accidents across the United States each year occur on the left or right side of the bus. These collisions result in property damage, and they can negatively impact on revenue operations and public perception. The first commer...
Field evaluation of the myrtle creek advanced curve warning system : final report.
DOT National Transportation Integrated Search
2006-06-01
As part of a larger study focusing on determining optimum countermeasures for speed related crashes, this report presents the results of a quantitative and qualitative before and after evaluation of a dynamic curve warning system deployed at one site...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-27
... NUCLEAR REGULATORY COMMISSION [NRC-2012-0218] Final Comparative Environmental Evaluation of... Regulatory Commission (NRC) is issuing the Final Comparative Environmental Evaluation of Alternatives for... commercial nuclear power plants (NPPs). This comparative environmental evaluation has been conducted...
CASMO5 JENDL-4.0 and ENDF/B-VII.1beta4 libraries
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rhodes, J.; Gheorghiu, N.; Ferrer, R.
2012-07-01
This paper details the generation of neutron data libraries for the CASMO5 lattice physics code based on the recently released JENDL-4.0 and ENDF/B-VII.1beta4 nuclear data evaluations. This data represents state-of-the-art nuclear data for late-2011. The key features of the new evaluations are briefly described along with the procedure for processing of this data into CASMO5, 586-energy group neutron data libraries. Finally some CASMO5 results for standard UO{sub 2} and MOX critical experiments for the two new libraries and the current ENDF/B-VII.0 CASMO5 library are presented including the B and W 1810 series, DIMPLE S06A, S06B, TCA reflector criticals with ironmore » plates and the PNL-30-35 MOX criticals. The results show that CASMO5 with the new libraries is performing well for these criticals with a very slight edge in results to the JENDL-4.0 nuclear data evaluation over the ENDF/B-VII.1beta4 evaluation. Work is currently underway to generate a CASMO5 library based on the final ENDF/B-VII.R1 evaluation released Dec. 22, 2011. (authors)« less
ERIC Educational Resources Information Center
Storey, Keith
This final report briefly describes activities of a project which developed and evaluated specific natural support intervention procedures to increase the social integration of employees with severe disabilities using single-subject, clique analysis, and social validation methodologies. The project resulted in the publication of 6 journal articles…
Electronic intermodal supply chain manifest field operational test evaluation draft final report
DOT National Transportation Integrated Search
2002-12-01
This report presents the results of a 2.5 year freight ITS evaluation of an air cargo security and logistics system which was deployed at OHare and JFK international airports. In September 1999, the Federal Highway Administration (FHWA) and the Fe...
SHRP2 EconWorks : wider economic benefits analysis tools : final report.
DOT National Transportation Integrated Search
2016-01-01
CDM Smith has completed an evaluation of the EconWorks Wider Economic Benefits (W.E.B.) : Analysis Tools for Connecticut Department of Transportation (CTDOT). The intent of this : evaluation was to compare the results of the outputs of this toolkit t...
DOT National Transportation Integrated Search
2003-11-14
Transit Tracker uses global positioning system (GPS) technology to track how far a bus is along its scheduled route. This document presents the evaluation strategies and objectives, the data collection methodologies, and the results of the evaluation...
Evaluation of laminar flow control system concepts for subsonic commercial transport aircraft
NASA Technical Reports Server (NTRS)
1979-01-01
Results of a 2-year study are reported which were carried out to extend the development of laminar flow control (LFC) technology and evaluate LFC systems concepts. The overall objective of the LFC program is to provide a sound basis for industry decisions on the application of LFC to future commercial transports. The study was organized into major tasks to support the stated objectives through application of LFC systems concepts to a baseline LFC transport initially generated for the study. Based on competitive evaluation of these concepts, a final selection was made for incorporation into the final design of an LFC transport which also included other advanced technology elements appropriate to the 1990 time period.
ERIC Educational Resources Information Center
Human Resources and Skills Development Canada, 2004
2004-01-01
This report provides a summary of six summative evaluation studies that were implemented and completed between 1999 and 2002. The evaluations were conducted on three different streams of Canada's Youth Employment Strategy (YES). The Youth Employment Strategy was introduced by the federal government in 1997 to address employment related challenges…
ERIC Educational Resources Information Center
Stenner, A. Jackson; And Others
This document contains the first of five volumes reporting the activities and results of a career education evaluation project conducted to accomplish the following two objectives: (1) to improve the quality of evaluations by career education projects funded by the United States Office of Career Education (OCE) through the provision of technical…
Improving Evaluation Use in Local School Settings. Optimizing Evaluation Use: Final Report.
ERIC Educational Resources Information Center
King, Jean A.; And Others
A project for studying ways to optimize utilization of evaluation products in public schools is reported. The results indicate that the negative picture of use prevalent in recent literature stems from the unrealistic expectation that local decision-makers will behave in a classically rational manner. Such a view ignores the political settings of…
Final safety analysis report for the Galileo Mission: Volume 2: Summary
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The General Purpose Heat Source Radioisotope Thermoelectric Generator (GPHS-RTG) will be used as the prime source of electric power for the spacecraft on the Galileo mission. The use of radioactive material in these missions necessitates evaluations of the radiological risks that may be encountered by launch complex personnel and by the Earth's general population resulting from postulated malfunctions or failures occurring in the mission operations. The purpose of the Final Safety Analysis Report (FSAR) is to present the analyses and results of the latest evaluation of the nuclear safety potential of the GPHS-RTG as employed in the Galileo mission. Thismore » evaluation is an extension of earlier work that addressed the planned 1986 launch using the Space Shuttle Vehicle with the Centaur as the upper stage. This extended evaluation represents the launch by the Space Shuttle/IUS vehicle. The IUS stage has been selected as the vehicle to be used to boost the Galileo spacecraft into the Earth escape trajectory after the parking orbit is attained.« less
NASA Technical Reports Server (NTRS)
Kitzis, J. L.; Kitzis, S. N.
1979-01-01
The brightness temperature data produced by the SMMR final Antenna Pattern Correction (APC) algorithm is discussed. The algorithm consisted of: (1) a direct comparison of the outputs of the final and interim APC algorithms; and (2) an analysis of a possible relationship between observed cross track gradients in the interim brightness temperatures and the asymmetry in the antenna temperature data. Results indicate a bias between the brightness temperature produced by the final and interim APC algorithm.
Diaby, Vakaramoko; Adunlin, Georges; Montero, Alberto J
2014-02-01
Survival modeling techniques are increasingly being used as part of decision modeling for health economic evaluations. As many models are available, it is imperative for interested readers to know about the steps in selecting and using the most suitable ones. The objective of this paper is to propose a tutorial for the application of appropriate survival modeling techniques to estimate transition probabilities, for use in model-based economic evaluations, in the absence of individual patient data (IPD). An illustration of the use of the tutorial is provided based on the final progression-free survival (PFS) analysis of the BOLERO-2 trial in metastatic breast cancer (mBC). An algorithm was adopted from Guyot and colleagues, and was then run in the statistical package R to reconstruct IPD, based on the final PFS analysis of the BOLERO-2 trial. It should be emphasized that the reconstructed IPD represent an approximation of the original data. Afterwards, we fitted parametric models to the reconstructed IPD in the statistical package Stata. Both statistical and graphical tests were conducted to verify the relative and absolute validity of the findings. Finally, the equations for transition probabilities were derived using the general equation for transition probabilities used in model-based economic evaluations, and the parameters were estimated from fitted distributions. The results of the application of the tutorial suggest that the log-logistic model best fits the reconstructed data from the latest published Kaplan-Meier (KM) curves of the BOLERO-2 trial. Results from the regression analyses were confirmed graphically. An equation for transition probabilities was obtained for each arm of the BOLERO-2 trial. In this paper, a tutorial was proposed and used to estimate the transition probabilities for model-based economic evaluation, based on the results of the final PFS analysis of the BOLERO-2 trial in mBC. The results of our study can serve as a basis for any model (Markov) that needs the parameterization of transition probabilities, and only has summary KM plots available.
2015-01-01
Background The third edition of the BioNLP Shared Task was held with the grand theme "knowledge base construction (KB)". The Genia Event (GE) task was re-designed and implemented in light of this theme. For its final report, the participating systems were evaluated from a perspective of annotation. To further explore the grand theme, we extended the evaluation from a perspective of KB construction. Also, the Gene Regulation Ontology (GRO) task was newly introduced in the third edition. The final evaluation of the participating systems resulted in relatively low performance. The reason was attributed to the large size and complex semantic representation of the ontology. To investigate potential benefits of resource exchange between the presumably similar tasks, we measured the overlap between the datasets of the two tasks, and tested whether the dataset for one task can be used to enhance performance on the other. Results We report an extended evaluation on all the participating systems in the GE task, incoporating a KB perspective. For the evaluation, the final submission of each participant was converted to RDF statements, and evaluated using 8 queries that were formulated in SPARQL. The results suggest that the evaluation may be concluded differently between the two different perspectives, annotation vs. KB. We also provide a comparison of the GE and GRO tasks by converting their datasets into each other's format. More than 90% of the GE data could be converted into the GRO task format, while only half of the GRO data could be mapped to the GE task format. The imbalance in conversion indicates that the GRO is a comprehensive extension of the GE task ontology. We further used the converted GRO data as additional training data for the GE task, which helped improve GE task participant system performance. However, the converted GE data did not help GRO task participants, due to overfitting and the ontology gap. PMID:26202680
DOE Office of Scientific and Technical Information (OSTI.GOV)
Flinn, D.G.; Hall, S.; Morris, J.
This volume describes the background research, the application of the proposed loss evaluation techniques, and the results. The research identified present loss calculation methods as appropriate, provided care was taken to represent the various system elements in sufficient detail. The literature search of past methods and typical data revealed that extreme caution in using typical values (load factor, etc.) should be taken to ensure that all factors were referred to the same time base (daily, weekly, etc.). The performance of the method (and computer program) proposed in this project was determined by comparison of results with a rigorous evaluation ofmore » losses on the Salt River Project system. This rigorous evaluation used statistical modeling of the entire system as well as explicit enumeration of all substation and distribution transformers. Further tests were conducted at Public Service Electric and Gas of New Jersey to check the appropriateness of the methods in a northern environment. Finally sensitivity tests indicated data elements inaccuracy of which would most affect the determination of losses using the method developed in this project.« less
DOT National Transportation Integrated Search
2001-12-01
The purpose of this research project was to provide a systematic evaluation of the performance of Florida's commuter assistance programs from two perspectives: Impact on the commuting patterns and awareness of the general public; and Impact on the co...
DOT National Transportation Integrated Search
2015-10-21
This report summarizes the results of the work performed to install a diesel vapor reclamation unit (DVRU) on an SD70 MAC : locomotive of BNSF Railways and its performance evaluation during freight railroad service. One complete DVRU with several : s...
DOT National Transportation Integrated Search
2011-06-14
This document is the final report of an evaluation of Clarus-enabled enhanced road weather forecasting used in the Clarus Demonstrations. This report examines the use of Clarus data to enhance four types of weather models and forecasts: The Local Ana...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rowe, M.D.; Pierce, B.L.
This report presents results of tests of different final site selection methods used for siting large-scale facilities such as nuclear power plants. Test data are adapted from a nuclear power plant siting study conducted on Long Island, New York. The purpose of the tests is to determine whether or not different final site selection methods produce different results, and to obtain some understanding of the nature of any differences found. Decision rules and weighting methods are included. Decision rules tested are Weighting Summation, Power Law, Decision Analysis, Goal Programming, and Goal Attainment; weighting methods tested are Categorization, Ranking, Rating Ratiomore » Estimation, Metfessel Allocation, Indifferent Tradeoff, Decision Analysis lottery, and Global Evaluation. Results show that different methods can, indeed, produce different results, but that the probability that they will do so is controlled by the structure of differences among the sites being evaluated. Differences in weights and suitability scores attributable to methods have reduced significance if the alternatives include one or two sites that are superior to all others in many attributes. The more tradeoffs there are among good and bad levels of different attributes at different sites, the more important are the specifics of methods to the final decision. 5 refs., 14 figs., 19 tabs.« less
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-01
... action is EPA approving? B. Why is EPA approving this delisting? C. How will Beaumont Refinery manage the wastes, if it is delisted? D. When would the delisting exclusion be finalized? E. How would this action... petition? D. What were the results of Beaumont Refinery's analysis? E. How did EPA evaluate the risk of...
Evaluation of automatic video summarization systems
NASA Astrophysics Data System (ADS)
Taskiran, Cuneyt M.
2006-01-01
Compact representations of video, or video summaries, data greatly enhances efficient video browsing. However, rigorous evaluation of video summaries generated by automatic summarization systems is a complicated process. In this paper we examine the summary evaluation problem. Text summarization is the oldest and most successful summarization domain. We show some parallels between these to domains and introduce methods and terminology. Finally, we present results for a comprehensive evaluation summary that we have performed.
Comparison of Development Test and Evaluation and Overall Program Estimate at Completion
2011-03-01
of the overall model and parameter. In addition to 36 the Shapiro-Wilkes test , and Cook’s Distance overlay plot we used the Breusch - Pagan test to...Transformed Model Finally, we evaluated our log transformed model using the Breusch - Pagan test . The results return a value of .51, thus confirming our...COMPARISON OF DEVELOPMENT TEST AND EVALUATION AND OVERALL
This report documents the activities performed during and the results obtained from the performance evaluation of an arsenic (As) and uranium (U) removal technology demonstrated at Upper Bodfish in Lake Isabella, CA. The objectives of the project are to evaluate: (1) the effecti...
Koskinen, Heli I
2010-01-01
The Faculty of Veterinary Medicine at the University of Helsinki recognized the lack of systems to measure the quality of education. At the department level, this meant lack of systems to measure the quality of students' outcomes. The aim of this article was to compare the quality of outcomes of a final examination in veterinary radiology by calculating the correlations between traditional (quantitative scores traditionally given by veterinary teachers) and nontraditional (qualitative Structure of the Observed Learning Outcome, or SOLO, method) grading results. Evaluation of the quality of the questions is also included. The results indicate that SOLO offers criteria for quality evaluation, especially for questions. A correlation of 0.60 (p<0.01) existed between qualitative and quantitative estimations, and a correlation of 0.79 (p<0.01) existed between evaluators, both using traditional scores. Two suggestions for a better system to evaluate quality in the future: First, development of problem-solving skills during the learning process should also be assessed. Second, both the scoring of factual correctness of answers (knowledge) and the grammatical structure of an answer and the quality of presentation should be included in the quality evaluation process.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Durlak, E.R.
1986-05-01
This report presents a summary of the results of site-evaluation inspection conducted at Navy, Army, and Air Force base. The solar systems evaluated included space heating, space cooling, and domestic hot water system. The systems range in size from small two-collector systems to large arrays installed on barracks, mess halls, office buildings, etc. These operational results are presented so that future designs will benefit from the lesson learned in this study.
Project Developmental Continuity Evaluation: Final Report. Executive Summary.
ERIC Educational Resources Information Center
Bond, James T.; Rosario, Jose
This executive summary presents the major results of the longitudinal evaluation of Project Developmental Continuity (PDC). A Head Start demonstration project initiated by the Administration for Children, Youth and Families (ACYF) in 1974, the PDC aimed to stimulate the development and implementation of comprehensive programs linking Head Start…
USDA-ARS?s Scientific Manuscript database
Previous publications have outlined recommended practices for hydrologic and water quality (H/WQ) modeling, but none have formulated comprehensive guidelines for the final stage of modeling applications, namely evaluation, interpretation, and communication of model results and the consideration of t...
This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at the Arizona Water Company (AWC) facility in Rimrock, AZ. The objectives of the project were to evaluate: 1) the effectiveness of ...
Elevating the Importance of Teaching. National Project III. Final Report.
ERIC Educational Resources Information Center
Owens, Richard E.
An in-depth study was conducted of instructional improvement activities at Kansas State University, including a student evaluation instrument of teacher performance, called Instructional Development and Effectiveness Assessment (IDEA). Faculty reactions to the total evaluation system, the use of results for multiple purposes, and the current…
The report gives results of a study to evaluate several pollution prevention techniques that could be used to reduce styrene emissions from open molding processes in the fiberglass-reinforced
plastics/composites (FRP/C) and fiberglass boat building industries. Styrene emission...
DOT National Transportation Integrated Search
1999-12-01
This report presents the results of a four-year evaluation of an electric subcompact car. The principal finding was that the 1995-model electric car must be viewed in two contexts, the body/chassis/drive train and the battery/recharge system. Firstly...
A student-led course in clinical reasoning in the core curriculum
Zijdenbos, Ingeborg L.; de Haan, Margriet C.; Valk, Gerlof D.
2010-01-01
Objectives There is growing evidence for the value of several forms of peer teaching in medical education. Little is known about the feasibility of such an approach in courses of clinical reasoning. The University Medical Center Utrecht offers a clinical reasoning course for first and second year students which previously had been occasionally led by sixth year, i.e. near-peer students. We evaluated a version of this course, fully delivered by final year students. Methods In 2008-2009 this highly structured mandatory clinical reasoning course for second year medical students was fully tutored by final year medical students, as part of a teacher training course in their core curriculum. Routine evaluations before and after introducing near-peers as tutors were compared, a focused questionnaire survey was conducted, as well as an interview with a group of students to evaluate the new format. Results There was no difference in the ratings of the course before and after the introduction of the new format. In general, second year students are satisfied with the near-peer teachers. Strong points mentioned are their high motivation, involvement, enthusiasm, adjustment of cognitive level of teaching to the recipient students and stimulating skills. Conclusions Although our study cannot provide evidence for differential learning effects, the evaluation of our final year student led clinical reasoning course shows encouraging results.
Simulator evaluation of the final approach spacing tool
NASA Technical Reports Server (NTRS)
Davis, Thomas J.; Erzberger, Heinz; Green, Steven M.
1990-01-01
The design and simulator evaluation of an automation tool for assisting terminal radar approach controllers in sequencing and spacing traffic onto the final approach course is described. The automation tool, referred to as the Final Approach Spacing Tool (FAST), displays speed and heading advisories for arrivals as well as sequencing information on the controller's radar display. The main functional elements of FAST are a scheduler that schedules and sequences the traffic, a 4-D trajectory synthesizer that generates the advisories, and a graphical interface that displays the information to the controller. FAST was implemented on a high performance workstation. It can be operated as a stand-alone in the Terminal Radar Approach Control (TRACON) Facility or as an element of a system integrated with automation tools in the Air Route Traffic Control Center (ARTCC). FAST was evaluated by experienced TRACON controllers in a real-time air traffic control simulation. Simulation results show that FAST significantly reduced controller workload and demonstrated a potential for an increase in landing rate.
Witek-McManus, Stefan; Mathanga, Don P; Verney, Allison; Mtali, Austin; Ali, Doreen; Sande, John; Mwenda, Reuben; Ndau, Saidi; Mazinga, Charles; Phondiwa, Emmanuel; Chimuna, Tiyese; Melody, David; Roschnik, Natalie; Brooker, Simon J; Halliday, Katherine E
2015-09-17
With increasing levels of enrolment, primary schools present a pragmatic opportunity to improve the access of school children to timely diagnosis and treatment of malaria, increasingly recognised as a major health problem within this age group. The expanded use of malaria rapid diagnostic tests (RDTs) and artemisinin combination therapy (ACT) by community health workers (CHWs) has raised the prospect of whether teachers can provide similar services for school children. We describe and evaluate the training of primary school teachers to use a first aid kit containing malaria RDTs and ACT for the diagnosis and treament of uncomplicated malaria in school children in southern Malawi. We outline the development of the intervention as: (1) conception and design, (2) pilot training, (3) final training, and (4) 7-month follow up. The training materials were piloted at a four-day workshop in July 2013 following their design at national stakeholders meetings. The evaluation of the pilot training and materials were assessed in relation to increased knowledge and skill sets using checklist evaluations and questionnaires, the results of which informed the design of a final seven-day training programme held in December 2013. A follow up of trained teachers was carried out in July 2014 following 7 months of routine implementation. A total of 15 teachers were evaluated at four stages: pilot training, two weeks following pilot, final training and seven months following final training. A total of 15 and 92 teachers were trained at the pilot and final training respectively. An average of 93 % of the total steps required to use RDTs were completed correctly at the final training, declining to 87 % after 7 months. All teachers were observed correctly undertaking safe blood collection and handling, accurate RDT interpretation, and correct dispensing of ACT. The most commonly observed errors were a failure to wait 20 minutes before reading the test result, and adding an incorrect volume of buffer to the test cassette. Following training, teachers are able to competently use RDTs and ACTs test and treat children at school for uncomplicated malaria safely and accurately. Teachers demonstrate a comparable level of RDT use relative to non-health professional users of RDTs, and sustain this competency over a period of seven months during routine implementation.
Face-induced expectancies influence neural mechanisms of performance monitoring.
Osinsky, Roman; Seeger, Jennifer; Mussel, Patrick; Hewig, Johannes
2016-04-01
In many daily situations, the consequences of our actions are predicted by cues that are often social in nature. For instance, seeing the face of an evaluator (e.g., a supervisor at work) may activate certain evaluative expectancies, depending on the history of prior encounters with that particular person. We investigated how such face-induced expectancies influence neurocognitive functions of performance monitoring. We recorded an electroencephalogram while participants completed a time-estimation task, during which they received performance feedback from a strict and a lenient evaluator. During each trial, participants first saw the evaluator's face before performing the task and, finally, receiving feedback. Therefore, faces could be used as predictive cues for the upcoming evaluation. We analyzed electrocortical signatures of performance monitoring at the stages of cue processing, task performance, and feedback reception. Our results indicate that, at the cue stage, seeing the strict evaluator's face results in an anticipatory preparation of fronto-medial monitoring mechanisms, as reflected by a sustained negative-going amplitude shift (i.e., the contingent negative variation). At the performance stage, face-induced expectancies of a strict evaluation rule led to increases of early performance monitoring signals (i.e., frontal-midline theta power). At the final stage of feedback reception, violations of outcome expectancies differentially affected the feedback-related negativity and frontal-midline theta power, pointing to a functional dissociation between these signatures. Altogether, our results indicate that evaluative expectancies induced by face-cues lead to adjustments of internal performance monitoring mechanisms at various stages of task processing.
Bornstein, Michael M; Bingisser, Andreas C; Reichart, Peter A; Sendi, Pedram; Bosshardt, Dieter D; von Arx, Thomas
2015-06-01
The aim of this study was to evaluate the concordance of 2- and 3-dimensional radiography and histopathology in the diagnosis of periapical lesions. Patients were consecutively enrolled in this study provided that preoperative periapical radiography (PR) and cone-beam computed tomographic imaging of the tooth to be treated with apical surgery were performed. The periapical lesional tissue was histologically analyzed by 2 blinded examiners. The final histologic diagnosis was compared with the radiographic assessments of 4 blinded observers. The initial study material included 62 teeth in the same number of patients. Four lesions had to be excluded during processing, resulting in a final number of 58 evaluated cases (31 women and 27 men, mean age = 55 years). The final histologic diagnosis of the periapical lesions included 55 granulomas (94.8%) and 3 cysts (5.2%). Histologic analysis of the tissue samples from the apical lesions exhibited an almost perfect agreement between the 2 experienced investigators with an overall agreement of 94.83% (kappa = 0.8011). Radiographic assessment overestimated cysts by 28.4% (cone-beam computed tomographic imaging) and 20.7% (periapical radiography), respectively. Comparing the correlation of the radiographic diagnosis of 4 observers with the final histologic diagnosis, 2-dimensional (kappa = 0.104) and 3-dimensional imaging (kappa = 0.111) provided only minimum agreement. To establish a final diagnosis of an apical radiolucency, the tissue specimen should be evaluated histologically and specified as a granuloma (with/without epithelium) or a cyst. Analysis of 2-dimensional and 3-dimensional radiographic images alike results only in a tentative diagnosis that should be confirmed with biopsy. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
de Boer, Gijs; Lawrence, Dale; Palo, Scott
2017-03-29
This final technical report details activities undertaken as part of the referenced project. Included is information on the preparation of aircraft for deployment to Alaska, summaries of the three deployments covered under this project, and a brief description of the dataset and science directions pursued. Additionally, we provide information on lessons learned, publications, and presentations resulting from this work.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Abdelaziz, Omar; Shrestha, Som S.; Shen, Bo
The Oak Ridge National Laboratory (ORNL) High-Ambient-Temperature Evaluation Program for Low-Global Warming Potential (Low-GWP) Refrigerants aims to develop an understanding of the performance of low-GWP alternative refrigerants relative to hydrochlorofluorocarbon (HCFC) and hydrofluorocarbon (HFC) refrigerants in packaged or Rooftop Unit (RTU) air conditioners under high-ambient-temperature conditions. This final report describes the parties involved, the alternative refrigerants selection process, the test procedures, and the final results.
ERIC Educational Resources Information Center
Gordon, Ronnie; And Others
Presented are the final reports of a two-part project designed to measure the effect of an intensive inpatient developmental program on 40 young multi-handicapped children (18-36 months old) and their parents. Part 1 describes a system developed and tested to record and analyze changes in child functioning. Reported are results from…
Speed Control Law for Precision Terminal Area In-Trail Self Spacing
NASA Technical Reports Server (NTRS)
Abbott, Terence S.
2002-01-01
This document describes a speed control law for precision in-trail airborne self-spacing during final approach. This control law was designed to provide an operationally viable means to obtain a desired runway threshold crossing time or minimum distance, one aircraft relative to another. The control law compensates for dissimilar final approach speeds between aircraft pairs and provides guidance for a stable final approach. This algorithm has been extensively tested in Monte Carlo simulation and has been evaluated in piloted simulation, with preliminary results indicating acceptability from operational and workload standpoints.
ERIC Educational Resources Information Center
Powell, Marjorie; And Others
The final volume in a series of six evaluation reports, this document provides a summary of the results of the evaluation of Project Developmental Continuity (PDC), conducted when the evaluation study's cohort of children had completed grade 1. Begun at 15 sites in 1974 with the purpose of ensuring that disadvantaged children receive continuous…
Fuzzy Evaluating Customer Satisfaction of Jet Fuel Companies
NASA Astrophysics Data System (ADS)
Cheng, Haiying; Fang, Guoyi
Based on the market characters of jet fuel companies, the paper proposes an evaluation index system of jet fuel company customer satisfaction from five dimensions as time, business, security, fee and service. And a multi-level fuzzy evaluation model composing with the analytic hierarchy process approach and fuzzy evaluation approach is given. Finally a case of one jet fuel company customer satisfaction evaluation is studied and the evaluation results response the feelings of the jet fuel company customers, which shows the fuzzy evaluation model is effective and efficient.
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at the Lidgerwood, North Dakota site. The objectives of the project were to evaluate: (1) the effectiveness of process modifications to an e...
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at Charette Mobile Home Park (CMHP) in Dummerston, Vermont. The objectives of the project were to evaluate: (1) the effectiveness of an Aqua...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project in Brown City, MI. The objectives of the project were to evaluate (1) the effectiveness of a Severn Trent Services (STS) adsorptive media s...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at the Orchard Highlands Subdivision site in Goffstown, NH. The main objective of the project was to evaluate the effectiveness of AdEdge T...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at Lead, South Dakota. The main objective of the project was to evaluate the effectiveness of SolmeteX’s adsorptive media system in removin...
This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at the United Water Systems’ facility in Arnaudville, LA. The objectives of the project were to evaluate: (1) the effectiveness of K...
This report documents the activities performed during and the results obtained from the U.S. Environmental Protection Agency (EPA) arsenic removal technology demonstration project at the City of Sandusky, MI facility. The objectives of the project were to evaluate: 1) the effect...
This report documents the activities performed and the results obtained from the arsenic removal drinking water treatment technology demonstration project at the Village of Waynesville, IL. The main objective of the project was to evaluate the effectiveness of the Peerless coagu...
DOT National Transportation Integrated Search
1985-12-01
This is the final report on the results of three attitudinal surveys of licensed drivers in New York state conducted as part of the evaluation of New York's Mandatory Occupant Restraint law. The objective of the attitudinal surveys was to provide inf...
DOT National Transportation Integrated Search
1985-12-01
This is the final report on the results of three observational surveys of restraint use by front seat occupants conducted as part of the evaluation of New York's Mandatory Occupant Restraint Law. Observations were conducted at a probability sample of...
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project following one year of operation at the Climax, Minnesota, site. The objectives of the project were to evaluate: (1) the effectiveness of Kin...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at Rollinsford, New Hampshire. The objectives of the project were to evaluate: 1) the effectiveness of AdEdge Technologies’ AD -33TM media ...
Integrated Science in the Seychelles: An Evaluation.
ERIC Educational Resources Information Center
Brophy, Michael; Pillay, Patrick
1986-01-01
Provides an overview of the educational program of the Seychelles and focuses on an evaluation of the final phase (P7-P9) of the nine-year school program. Reports how findings from content analyses of materials, teacher and student interviews, and student test results were used to develop the new Seychelles Integrated Science program. (ML)
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at the Desert Sands Mutual Domestic Water Consumers Association (MDWCA) facility in Anthony, NM. The objectives of the project were to evalu...
ERIC Educational Resources Information Center
Vocational Evaluation and Work Adjustment Association, Washington, DC.
Part 2 of the three-part Vocational Evaluation Project final report contains brief summaries of the seven task force report which comprise the final report and two such task force reports. The report of task force 5, Standards for Vocational Evaluation, describes the task force's effort to study the standards for accreditation presently used by…
Influence parameters of impact grinding mills
NASA Technical Reports Server (NTRS)
Hoeffl, K.; Husemann, K.; Goldacker, H.
1984-01-01
Significant parameters for impact grinding mills were investigated. Final particle size was used to evaluate grinding results. Adjustment of the parameters toward increased charge load results in improved efficiency; however, it was not possible to define a single, unified set to optimum grinding conditions.
Evaluation of data generated by statistically oriented end-result specifications : final report.
DOT National Transportation Integrated Search
1979-01-01
This report is concerned with the review of data generated on projects let under the statistically oriented end-result specifications (ERS) on asphaltic concrete and Portland cement concrete. The review covered analysis of data for determination of p...
Final Overview of ACES Simulation for Evaluation SARP Well-Clear Definitions
NASA Technical Reports Server (NTRS)
Santiago, Confesor; Johnson, Marcus A.; Isaacson, Doug; Hershey, David
2014-01-01
The UAS in the NAS project is studying the minimum operational performance standards for unmanned aerial systems (UAS's) detect-and-avoid (DAA) system in order to operate in the National Airspace System. The DoD's Science and research Panel (SARP) Well-Clear Workshop is investigating the time and spatial boundary at which an UAS violates well-clear. NASA is supporting this effort through use of its Airspace Concept Evaluation System (ACES) simulation platform. This briefing presents the final results to the SARP, which will be used to judge the three candidate well-clear definitions, and for the selection of the most operationally suitable option.
Enhancing course grades and evaluations using distance education technologies.
Carpenter, Roger; Theeke, Laurie; Smothers, Angel
2013-01-01
Delivering appropriate amounts of course content using appropriate methods is a concern for nursing faculty. To address this problem, webcasting, Camtasia, and Wimba Live Classroom were evaluated for impact on course grades and student evaluations in a medical-surgical nursing course. The addition of Camtasia resulted in improved final grades and Student Evaluations of Instruction scores that reflected enhanced critical thinking, teacher effectiveness, and overall learning. Students preferred recorded content that could be viewed on mobile devices.
The Paris-Sud yeast structural genomics pilot-project: from structure to function.
Quevillon-Cheruel, Sophie; Liger, Dominique; Leulliot, Nicolas; Graille, Marc; Poupon, Anne; Li de La Sierra-Gallay, Inès; Zhou, Cong-Zhao; Collinet, Bruno; Janin, Joël; Van Tilbeurgh, Herman
2004-01-01
We present here the outlines and results from our yeast structural genomics (YSG) pilot-project. A lab-scale platform for the systematic production and structure determination is presented. In order to validate this approach, 250 non-membrane proteins of unknown structure were targeted. Strategies and final statistics are evaluated. We finally discuss the opportunity of structural genomics programs to contribute to functional biochemical annotation.
Probability distributions of continuous measurement results for conditioned quantum evolution
NASA Astrophysics Data System (ADS)
Franquet, A.; Nazarov, Yuli V.
2017-02-01
We address the statistics of continuous weak linear measurement on a few-state quantum system that is subject to a conditioned quantum evolution. For a conditioned evolution, both the initial and final states of the system are fixed: the latter is achieved by the postselection in the end of the evolution. The statistics may drastically differ from the nonconditioned case, and the interference between initial and final states can be observed in the probability distributions of measurement outcomes as well as in the average values exceeding the conventional range of nonconditioned averages. We develop a proper formalism to compute the distributions of measurement outcomes, and evaluate and discuss the distributions in experimentally relevant setups. We demonstrate the manifestations of the interference between initial and final states in various regimes. We consider analytically simple examples of nontrivial probability distributions. We reveal peaks (or dips) at half-quantized values of the measurement outputs. We discuss in detail the case of zero overlap between initial and final states demonstrating anomalously big average outputs and sudden jump in time-integrated output. We present and discuss the numerical evaluation of the probability distribution aiming at extending the analytical results and describing a realistic experimental situation of a qubit in the regime of resonant fluorescence.
Intra-Operative Frozen Sections for Ovarian Tumors – A Tertiary Center Experience
Arshad, Nur Zaiti Md; Ng, Beng Kwang; Paiman, Noor Asmaliza Md; Mahdy, Zaleha Abdullah; Noor, Rushdan Mohd
2018-01-01
Background: Accuracy of diagnosis with intra-operative frozen sections is extremely important in the evaluation of ovarian tumors so that appropriate surgical procedures can be selected. Study design: All patients who with intra-operative frozen sections for ovarian masses in a tertiary center over nine years from June 2008 until April 2017 were reviewed. Frozen section diagnosis and final histopathological reports were compared. Main outcome measures: Sensitivity, specificity, positive and negative predictive values of intra-operative frozen section as compared to final histopathological results for ovarian tumors. Results: A total of 92 cases were recruited for final evaluation. The frozen section diagnoses were comparable with the final histopathological reports in 83.7% of cases. The sensitivity, specificity, positive predictive value and negative predictive value for benign and malignant ovarian tumors were 95.6%, 85.1%, 86.0% and 95.2% and 69.2%, 100%, 100% and 89.2% respectively. For borderline ovarian tumors, the sensitivity and specificity were 76.2% and 88.7%, respectively; the positive predictive value was 66.7% and the negative predictive value was 92.7%. Conclusion: The accuracy of intra-operative frozen section diagnoses for ovarian tumors is high and this approach remains a reliable option in assessing ovarian masses intra-operatively. PMID:29373916
NASA Technical Reports Server (NTRS)
Schwenke, David W.; Langhoff, Stephen R. (Technical Monitor)
1995-01-01
A description is given of an algorithm for computing ro-vibrational energy levels for tetratomic molecules. The expressions required for evaluating transition intensities are also given. The variational principle is used to determine the energy levels and the kinetic energy operator is simple and evaluated exactly. The computational procedure is split up into the determination of one dimensional radial basis functions, the computation of a contracted rotational-bending basis, followed by a final variational step coupling all degrees of freedom. An angular basis is proposed whereby the rotational-bending contraction takes place in three steps. Angular matrix elements of the potential are evaluated by expansion in terms of a suitable basis and the angular integrals are given in a factorized form which simplifies their evaluation. The basis functions in the final variational step have the full permutation symmetries of the identical particles. Sample results are given for HCCH and BH3.
Physiotherapy for poliomyelitis: a descriptive study in the Republic of Congo.
Mancini, Silvia; Coldiron, Matthew E; Nicholas, Sarala; Llosa, Augusto E; Mouniaman-Nara, Isabelle; Ngala, Joseph; Grais, Rebecca F; Porten, Klaudia
2014-10-23
A large poliomyelitis outbreak occurred in 2010 in the Republic of Congo. This paper describes the demographic and clinical characteristics of poliomyelitis cases and their outcomes following physiotherapy. Demographic and clinical data were collected on 126 individuals between November 23, 2010 and March 23, 2011. The male/female ratio was 2.5 and the median age was 19 years (IQR: 13.5-23). The most severe forms of the disease were more common in older patients, 81 of the 126 patients (64.3%) had multiple evaluations of muscle strength. Among patients with multiple evaluations, 38.1% had improved strength at final evaluation, 48.3% were stable and 13.6% had decreased strength. Most acute poliomyelitis patients receiving physiotherapy had improved or stable muscle strength at their final evaluation. These descriptive results highlight the need for further research into the potential benefits of physiotherapy in polio affected patients.
The quiet revolution: reporting of health outcomes in general medical journals.
Seymour, J; Newell, D; Shiell, A
1997-01-01
This study reviews the extent of evaluation of health outcomes in three general medical journals over the past decade by examining papers published in the original research section of the New England Journal of Medicine (NEJM), The Lancet, and the Medical Journal of Australia (MJA) in 1982 and 1992. Evaluations were identified and classified according to the type of comparison group and the type of outcome measures employed. They were divided into three categories: those employing a comparison group; those employing a before-and-after study design (or own comparison group); and those with no comparison group. The categories of outcome measures were mortality, clinical or intermediate measures of health state, and final outcome measures (quality of life). Results show that the proportion of papers evaluating a health services intervention remained stable over the period. However, the MJA published considerably fewer evaluations than the other journals. In the NEJM and The Lancet, 75 per cent of evaluations incorporated comparison groups, in the MJA, less than 40 per cent. Overall, the proportion of papers reporting final outcome measures increased significantly between 1982 and 1992 (p = 0.04) but the change in each journal individually did not reach statistical significance. This study indicates that the reporting of health outcomes evaluations has remained constant but there has been some change in the use of comparison groups and final outcome measures over time.
Faraji Khiavi, F; Amiri, E; Ghobadian, S; Roshankar, R
2015-01-01
Background: Increasing nurses’ motivation is among the most important and complex nursing duties. Performance evaluation system could be used as a means to improve the quantity and quality of the human resources. Therefore, current research objected to evaluate the effect of final evaluation on job motivation from the perspective of nurses in Ahvaz hospitals according to Herzberg scheme. Methods: This investigation conducted in 2012. Research population included nurses in Ahvaz educational hospitals. The sample size was calculated 120 and sampling was performed based on classification and random sampling. Research instrument was a self-made questionnaire with confirmed validity through content analysis and Cronbach’s alpha calculated at 0.94. Data examined utilizing ANOVA, T-Test, and descriptive statistics. Results: The nurses considered the final evaluation on management policy (3.2 ± 1.11) and monitoring (3.15 ± 1.15) among health items and responsibility (3.15 ± 1.15) and progress (3.06 ± 1.24) among motivational factors relatively effective. There was a significant association between scores of nurses' views in different age and sex groups (P = 0.01), but there was no significant association among respondents in educational level and marital status. Conclusion: Experienced nurses believed that evaluation has little effect on job motivation. If annual assessment of the various job aspects are considered, managers could use it as an efficient tool to motivate nurses. PMID:28316733
Faraji Khiavi, F; Amiri, E; Ghobadian, S; Roshankar, R
2015-01-01
Background: Increasing nurses' motivation is among the most important and complex nursing duties. Performance evaluation system could be used as a means to improve the quantity and quality of the human resources. Therefore, current research objected to evaluate the effect of final evaluation on job motivation from the perspective of nurses in Ahvaz hospitals according to Herzberg scheme. Methods: This investigation conducted in 2012. Research population included nurses in Ahvaz educational hospitals. The sample size was calculated 120 and sampling was performed based on classification and random sampling. Research instrument was a self-made questionnaire with confirmed validity through content analysis and Cronbach's alpha calculated at 0.94. Data examined utilizing ANOVA, T-Test, and descriptive statistics. Results: The nurses considered the final evaluation on management policy (3.2 ± 1.11) and monitoring (3.15 ± 1.15) among health items and responsibility (3.15 ± 1.15) and progress (3.06 ± 1.24) among motivational factors relatively effective. There was a significant association between scores of nurses' views in different age and sex groups (P = 0.01), but there was no significant association among respondents in educational level and marital status. Conclusion: Experienced nurses believed that evaluation has little effect on job motivation. If annual assessment of the various job aspects are considered, managers could use it as an efficient tool to motivate nurses.
Why Veterinary Medical Educators Should Embrace Cumulative Final Exams.
Royal, Kenneth D
The topic of cumulative final examinations often elicits polarizing opinions from veterinary medical educators. While some faculty prefer cumulative finals, there are many who perceive these types of examinations as problematic. Specifically, faculty often cite cumulative examinations are more likely to cause students' greater stress, which may in turn result in negative student evaluations of teaching. Cumulative finals also restrict the number of items one may present to students on most recent material. While these cited disadvantages may have some merit, the advantages of cumulative examinations far exceed the disadvantages. The purpose of this article is to discuss the advantages of cumulative examinations with respect to learning evidence, grade/score validity, fairness issues, and implications for academic policy.
DOT National Transportation Integrated Search
1995-05-15
THE OBJECTIVE AND SUBJECTIVE RESULTS OBTAINED THIS YEAR ARE FROM A POPULATION OF 36 DRIVER-PARTICIPANTS THAT WAS BALANCED FOR GENDER, AGE, AND EXPERIENCE WITH CRUISE CONTROL. THESE RESULTS INDICATE THAT THE BASELINE SYSTEM OPERATES WELL ON U.S. FREEW...
ERIC Educational Resources Information Center
Moore, Audrey-Marie Schuh; Florez, Ana; Grajeda, Eva
2010-01-01
This evaluation of progress in tackling the problems of access, quality, equity and completion of primary and secondary education examines the results of an alliance between the Coffee Growers Committee of Caldas (CGC) and the Department of Caldas, Colombia. The evaluation team employed a retrospective approach to understanding the social,…
NASA PC software evaluation project
NASA Technical Reports Server (NTRS)
Dominick, Wayne D. (Editor); Kuan, Julie C.
1986-01-01
The USL NASA PC software evaluation project is intended to provide a structured framework for facilitating the development of quality NASA PC software products. The project will assist NASA PC development staff to understand the characteristics and functions of NASA PC software products. Based on the results of the project teams' evaluations and recommendations, users can judge the reliability, usability, acceptability, maintainability and customizability of all the PC software products. The objective here is to provide initial, high-level specifications and guidelines for NASA PC software evaluation. The primary tasks to be addressed in this project are as follows: to gain a strong understanding of what software evaluation entails and how to organize a structured software evaluation process; to define a structured methodology for conducting the software evaluation process; to develop a set of PC software evaluation criteria and evaluation rating scales; and to conduct PC software evaluations in accordance with the identified methodology. Communication Packages, Network System Software, Graphics Support Software, Environment Management Software, General Utilities. This report represents one of the 72 attachment reports to the University of Southwestern Louisiana's Final Report on NASA Grant NGT-19-010-900. Accordingly, appropriate care should be taken in using this report out of context of the full Final Report.
This report documents the activities performed and the results obtained for the EPA arsenic removal technology demonstration project at the Town of Taos in New Mexico. The main objective of the project was to evaluate the effectiveness of Severn Trent Services’ (STS) SORB 33™ ad...
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at Richmond Elementary School in Susanville, CA. The objectives of the project were to evaluate: (1) the effectiveness of an Aquatic Treatme...
Adult Attitudes Toward Educational Issues. A Summary of Major Findings. Final Summary Report.
ERIC Educational Resources Information Center
Neff, Franklin W.
The results are reported of a survey of potential voters in Kansas City, Missouri, relative to their attitudes toward school levy elections. The survey encompassed four major areas, including residents' views on education in general, how they evaluated the public school system in their district, how they evaluated public schools in their…
This report documents the activities performed and the results obtained from January 30, 2006 to April 29, 2007 at the U.S. Environmental Protection Agency (EPA) Arsenic Removal Technology Demonstration site in Sabin, MN. The main objective of the project was to evaluate the eff...
This report documents activities performed for and results obtained from the arsenic removal treatment technology demonstration project at the Hot Springs Mobile Home Park (HSMHP) in Willard, UT. The objectives of the project were to evaluate the effectiveness of Adsorbsia™ GTO™...
Evaluation of a College Curriculum Advisory Program Utilizing Student Advisors. Final Report.
ERIC Educational Resources Information Center
Brown, Coke R.
This study was designed to evaluate the viability of using students as academic advisors for freshmen students and to document the process of the advising program at Idaho State University. Results show that students advised by students did as well academically and had a lower dropout rate than students advised by faculty. Descriptions of advisor…
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at the community of Prospect Bay at Grasonville in Queen Anne’s County, MD. The main objective of the project was to evaluate the effective...
This report documents the activities performed and the results obtained from the one-year U.S. Environmental Protection Agency (EPA) arsenic removal technology demonstration project at the Stewart, MN facility. The main objective of the project was to evaluate the effectiveness ...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project in the City of Wellman, TX. The main objective of the project was to evaluate the effectiveness of AdEdge Technologies’ AD-33 media in remo...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at the Webb Consolidated Independent School District (Webb CISD) in Bruni, TX. The main objective of the project was to evaluate the effect...
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at Golden Hills Community Services District (GHCSD) located in Tehachapi, CA. The objectives of the project were to evaluate (1) the effecti...
Vocational Assessment for Special Needs Individuals. Project Final Report, Phase I, 1979-1980.
ERIC Educational Resources Information Center
Stodden, Robert A.
The present state of the art of vocational evaluation is largely manifested within the field of vocational rehabilitation, and as a result, the concepts, instrumentation, and strategies do not lend themselves readily to an educational setting. This project attempted to bridge the gap between the conceptualized model of vocational evaluation within…
This report documents the activities performed and the results obtained from this arsenic removal treatment technology demonstration project at the Nambe Pueblo, New Mexico. The main objective of the project was to evaluate the effectiveness of AdEdge Technologies' AD-33 media i...
This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at the Village of Pentwater, MI facility. The objectives of the project were to evaluate: (1) the effectiveness of Kinetico’s FM-260...
This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at the Town of Felton, DE. The objectives of the project were to evaluate: (1) the effectiveness of Kinetico’s FM-348-AS coagulation...
This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at the City of Okanogan, WA facility. The objectives of the project were to evaluate: (1) the effectiveness of Filtronics’ FH-13 Ele...
This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at the City of Three Forks, MT facility. The objectives of the project were to evaluate: 1) the effectiveness of Kinetico’s FM-248-A...
This report documents the activities performed during and the results obtained from the first six months of the performance evaluation of a Kinetico ion exchange (IX) system to remove arsenic (As) and nitrate from source water at the City of Fruitland in Idaho. The 250-gal/min (...
DOT National Transportation Integrated Search
2011-09-01
This report describes the results from the testing of a full scale three span 43 year old adjacent prestressed concrete box beam bridge. This research is the second phase of the overall project entitled Structural Evaluation of LIC-310-0396 Box Be...
ERIC Educational Resources Information Center
Wilson, Leslie; And Others
This evaluation project was designed to assess 37 persons (ages 21-72) who had moved from intermediate care facilities or skilled nursing facilities into innovative one-person or two-person community integrated living arrangements as a result of the Supported Placements in Integrated Community Environments project. The 37 persons had severe or…
This report documents the activities performed for and the results obtained from the arsenic removal treatment technology demonstration project at the Woodstock Middle School in Woodstock, CT. The objectives of the project were to evaluate the effectiveness of Adsorbsia™ GTO™ me...
This report documents the activities performed for and the results obtained from the arsenic removal treatment technology demonstration project at Seely-Brown Village in Pomfret, CT. The objectives of the project were to evaluate the effectiveness of ArsenXnp adsorption media in...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at Northeastern Elementary School in Fountain City, IN. The main objective of the project was to evaluate the effectiveness of US Water Sys...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at the Geneseo Hills Subdivision in Geneseo, IL. The main objective of the project was to evaluate the effectiveness of AdEdge Technologies...
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at Licking Economic Action Development Study (LEADS) Head Start School in Buckeye Lake, Ohio. The objectives of the project were to evaluate...
Investigation of acoustic emission coupling techniques
NASA Technical Reports Server (NTRS)
Jolly, W. D.
1988-01-01
A three-phase research program was initiated by NASA in 1983 to investigate the use of acoustic monitoring techniques to detect incipient failure in turbopump bearings. Two prototype acoustic coupler probes were designed and evaluated, and four units of the final probe design were fabricated. Success in this program could lead to development of an on-board monitor which could detect bearing damage in flight and reduce or eliminate the need for disassembly after each flight. This final report reviews the accomplishments of the first two phases and presents the results of fabrication and testing completed in the final phase of the research program.
ERIC Educational Resources Information Center
Lane Community Coll., Eugene, OR.
A final report and final evaluation report of Phase III are provided for a project to establish a national clearinghouse for apprenticeship-related instructional materials. The final report provides a summary and a narrative account of these project activities: identification of materials; identification of apprenticeship curriculum needs;…
Design and evaluation of an air traffic control Final Approach Spacing Tool
NASA Technical Reports Server (NTRS)
Davis, Thomas J.; Erzberger, Heinz; Green, Steven M.; Nedell, William
1991-01-01
This paper describes the design and simulator evaluation of an automation tool for assisting terminal radar approach controllers in sequencing and spacing traffic onto the final approach course. The automation tool, referred to as the Final Approach Spacing Tool (FAST), displays speed and heading advisories for arriving aircraft as well as sequencing information on the controller's radar display. The main functional elements of FAST are a scheduler that schedules and sequences the traffic, a four-dimensional trajectory synthesizer that generates the advisories, and a graphical interface that displays the information to the controller. FAST has been implemented on a high-performance workstation. It can be operated as a stand-alone in the terminal radar approach control facility or as an element of a system integrated with automation tools in the air route traffic control center. FAST was evaluated by experienced air traffic controllers in a real-time air traffic control simulation. simulation results summarized in the paper show that the automation tools significantly reduced controller work load and demonstrated a potential for an increase in landing rate.
Effects of various final irrigants on the shear bond strength of resin-based sealer to dentin
Kandaswamy, Deivanayagam; Venkateshbabu, Nagendrababu; Arathi, Ganesh; Roohi, Riaz; Anand, Suresh
2011-01-01
Aim: This study has been designed to evaluate the effect of strong (MTAD) or soft (1- hydroxyethylidene – 1, 1-bisphosphonate (HEBP) final irrigating solution on the shear bond strength of AH plus sealer to coronal dentin. 17% EDTA was used as the reference. Materials and Methods: Forty freshly extracted human maxillary first premolars were prepared using different irrigation protocols (n=10). All the test groups had 1.3% NaOCl as initial rinse and followed by specific final rinse for each group: G1 – distilled water(control), G2 – 17% EDTA, G3- 18% HEBP and G4 – MTAD. Sections of polyethylene tubes that are 3mm long were filled with freshly mixed sealer and placed on the dentin surfaces. The bonding between the sealer and dentine surface was evaluated using shear bond testing. The values were statistically evaluated using one-way ANOVA followed by Tukey's test. Result: Significant difference was found among the irrigating regimes. EDTA showed highest bond strength followed by HEBP and MTAD PMID:21691504
Moulding techniques in lipstick manufacture: a comparative evaluation.
Dweck, A C; Burnham, C A
1980-06-01
Synopsis This paper examines two methods of lipstick bulk manufacture: one via a direct method and the other via stock concentrates. The paper continues with a comparison of two manufactured bulks moulded in three different ways - first by split moulding, secondly by Rotamoulding, and finally by Ejectoret moulding. Full consideration is paid to time, labour and cost standards of each approach and the resultant moulding examined using some novel physical testing methods. The results of these tests are statistically analysed. Finally, on the basis of the gathered data and photomicrographical work a theoretical lipstick structure is proposed by which the results may be explained.
NASA Technical Reports Server (NTRS)
Glover, R. C.; Kelley, B. A.; Tischer, A. E.
1986-01-01
The results of a review of the Space Shuttle Main Engine (SSME) failure data for the period 1980 through 1983 are presented. The data was collected, evaluated, and ranked according to procedures established during this study. A number of conclusions and recommendations are made based upon this failure data review. The results of a state-of-the-art diagnostic survey are also presented. This survey covered a broad range of diagnostic sensors and techniques and the findings were evaluated for application to the SSME. Finally, a discussion of the initial activities for the on-going SSME diagnostic evaluation is included.
Meckfessel, Sandra; Stühmer, Constantin; Bormann, Kai-Hendrik; Kupka, Thomas; Behrends, Marianne; Matthies, Herbert; Vaske, Bernhard; Stiesch, Meike; Gellrich, Nils-Claudius; Rücker, Martin
2011-01-01
Because a traditionally instructed dental radiology lecture course is very time-consuming and labour-intensive, online courseware, including an interactive-learning module, was implemented to support the lectures. The purpose of this study was to evaluate the perceptions of students who have worked with web-based courseware as well as the effect on their results in final examinations. Users (n(3+4)=138) had access to the e-program from any networked computer at any time. Two groups (n(3)=71, n(4)=67) had to pass a final exam after using the e-course. Results were compared with two groups (n(1)=42, n(2)=48) who had studied the same content by attending traditional lectures. In addition a survey of the students was statistically evaluated. Most of the respondents reported a positive attitude towards e-learning and would have appreciated more access to computer-assisted instruction. Two years after initiating the e-course the failure rate in the final examination dropped significantly, from 40% to less than 2%. The very positive response to the e-program and improved test scores demonstrated the effectiveness of our e-course as a learning aid. Interactive modules in step with clinical practice provided learning that is not achieved by traditional teaching methods alone. To what extent staff savings are possible is part of a further study. Copyright © 2010 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
DOT National Transportation Integrated Search
2004-12-30
This final report describes the national evaluation of the Greater Yellowstone Regional Traveler and Weather Information System (GYRTWIS). This evaluation complements the ongoing GYRTWIS evaluation being conducted by WTI/MSU by investigating three ar...
Evaluating the Effectiveness of Immersive Interfaces for Combat Training
2015-07-10
on pre- test and post - test improvement. Both test groups improved, but at the 95% level neither method of instruction...evenly separated into the two groups and then tested on the final day of the experiment. The results from this final assessment are used to determine... post - test on a competitive basis with two samples of ten subjects to prove effectives. This paper also uses a pre- test and post - test regimen on
A study of space shuttle structural integrity test and assessment. Part 1
NASA Technical Reports Server (NTRS)
Anderson, R. E.; Poe, R. G.
1972-01-01
The ultrasonics technique for assessing the structural integrity of the primary surface of the space shuttle vehicles is discussed and evaluated. Analysis was made of transducers, transducer coupling test structure fabrication, flaws, and ultrasonic testing. Graphs of microphone response curves from the initial noise tests, accelerometer response curves from the final noise tests, and microphone curves from the final noise tests are included along with a glossary, bibliography, and results.
ERIC Educational Resources Information Center
Zweizig, Douglas L.; Hopkins, Dianne McAfee
This book presents the results of an evaluation of Library Power, an initiative of the DeWitt Wallace-Reader's Digest Fund that provided support for school library development in 19 communities. Following an introductory chapter, the chapters are organized around key questions of the evaluation. Chapters 2 through 4 address the implementation of…
Evaluation of the Inhalation Carcinogenicity of Ethylene Oxide (Final Report)
EPA has finalized its Evaluation of the Inhalation Carcinogenicity of Ethylene Oxide. This assessment addresses the potential carcinogenicity from long-term inhalation exposure to ethylene oxide. Now final, this assessment updates the carcinogenicity information in EPA’s 1985 Hea...
Rollover Data Special Study : Final Report.
DOT National Transportation Integrated Search
2011-01-31
This report summarizes research results from the Rollover Data Special Study (RODSS) project. The research encompassed the : design of a RODSS database for the National Highway Traffic Safety Administration, review of the RODSS data to evaluate the :...
Reliability of Visual Inspection for Highway Bridges, Volume I : Final Report
DOT National Transportation Integrated Search
2001-06-01
This technical summary announces the findings of an investigation by the Federal Highway Administrations Nondestructive Evaluation Validation Center (NDEVC) concerning the reliability of Visual Inspection for highway bridges. Details and results a...
Bianchi, Bernardo; Ferri, Andrea; Ferrari, Silvano; Copelli, Chiara; Sesenna, Enrico
2011-04-01
The purpose of this article was to analyze the efficacy of facelift incision, sternocleidomastoid muscle flap, and superficial musculoaponeurotic system flap for improving the esthetic results in patients undergoing partial parotidectomy for benign parotid tumor resection. The usefulness of partial parotidectomy is discussed, and a statistical evaluation of the esthetic results was performed. From January 1, 1996, to January 1, 2007, 274 patients treated for benign parotid tumors were studied. Of these, 172 underwent partial parotidectomy. The 172 patients were divided into 4 groups: partial parotidectomy with classic or modified Blair incision without reconstruction (group 1), partial parotidectomy with facelift incision and without reconstruction (group 2), partial parotidectomy with facelift incision associated with sternocleidomastoid muscle flap (group 3), and partial parotidectomy with facelift incision associated with superficial musculoaponeurotic system flap (group 4). Patients were considered, after a follow-up of at least 18 months, for functional and esthetic evaluation. The functional outcome was assessed considering the facial nerve function, Frey syndrome, and recurrence. The esthetic evaluation was performed by inviting the patients and a blind panel of 1 surgeon and 2 secretaries of the department to give a score of 1 to 10 to assess the final cosmetic outcome. The statistical analysis was finally performed using the Mann-Whitney U test for nonparametric data to compare the different group results. P less than .05 was considered significant. No recurrence developed in any of the 4 groups or in any of the 274 patients during the follow-up period. The statistical analysis, comparing group 1 and the other groups, revealed a highly significant statistical difference (P < .0001) for all groups. Also, when group 2 was compared with groups 3 and 4, the difference was highly significantly different statistically (P = .0018 for group 3 and P = .0005 for group 4). Finally, when groups 3 and 4 were compared, the difference was not statistically significant (P = .3467). Partial parotidectomy is the real key point for improving esthetic results in benign parotid surgery. The evaluation of functional complications and the recurrence rate in this series of patients has confirmed that this technique can be safely used for parotid benign tumor resection. The use of a facelift incision alone led to a high statistically significant improvement in the esthetic outcome. When the facelift incision was used with reconstructive techniques, such as the sternocleidomastoid muscle flap or the superficial musculoaponeurotic system flap, the esthetic results improved further. Finally, no statistically significant difference resulted comparing the use of the superficial musculoaponeurotic system and the sternocleidomastoid muscle flap. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
[To evaluate the quality of life and peristomal skin ostomy patient with the new device Sensura].
Crespo Fontán, Beatriz; Caparrós Sanz, María Rosario; Lainez Pardos, Pilar Lourdes; Davín Durban, Inmaculada
2010-10-01
In 2006, Coloplast launched in several European countries a new device for ostomy care called Sensura. This clinical research report includes only the results of the subpopulation included in Spain as a part of an international study involving many countries such as Denmark, United States, Canada, Australia, Poland, Netherlands, France, Slovakia, Germany, UK, Italy, Iceland, Japan, Czech Republic, Portugal, South Korea and Argentina. OBJECTIVES AND STUDY VARIABLES: The main purpose of the study is to evaluate the experience with Sensura, under normal conditions of use, with special attention to skin condition and quality of life. The main objective of the study is to evaluate the quality of life, through Quality of Life Questionnaire called "Stoma QoL". A secondary objective, is to study the correlation between quality of life and the peristomal skin condition. Other Secondary objectives include the evaluation of the patient's current device at the time of entering the study and by the other hand, the device Sensura and safety evaluation throughout the study. The study was designed as an open label non-comparative, multi-national Post Market study. The study period for each patient is 6 to 8 weeks +/- 4 days, which includes an initial visit and a final visit. The study population included people who carry a colostomy or ileostomy. Regarding Spain, a total of 10 sites participated and included a total of 131 patients. This report only presents results for nine sites and a total of 123 patients. The reason is that the last participating site began the study with a considerable delay The remaining subjects included in this site together with the other centers in Spain and the other participating countries will be included in the final international report, that will present the overall results. MEASUREMENT TOOLS. Stoma-QoL (Quality of Life Questionnaire for people with an ostomy). OST (Ostomy Skin Tool) instrument for the assessment of peristomal skin. As for the quality of life, at baseline we found a mean of 59 out of 100 (SD = 8.8), while the final study visit, mean score was 59.6 out of 100 (SD = 9.3), although the final results on this variable will be presented in the global report, since it has not reached sufficient population in Spain for the analysis of this variable. The study revealed a significant improvement in the peristomal skin condition at the end of the study, measured by the tool OST (Ostomy Skin Tool). Regarding the evaluation of the SenSura device, there was a significant improvement related to the appearance of leakage of effluent, as well as other items evaluated in relation with the device.
Research to Support Intelligent Data Management
NASA Technical Reports Server (NTRS)
Lerner, B. T.
1998-01-01
This final report details the contract performance and analysis of research and development results obtained during the contract period. KT-Tech's research and development work results in the areas of registration of remotely sensed data and the test evaluation and porting of the Regional Validation Center software system are presented.
Research to Support Intelligent Data Management
NASA Technical Reports Server (NTRS)
Lerner, Bao-Ting
1998-01-01
This final report details the contract performance and analysis of research and development results obtained during the contract period. KT-TECH's research and development work results in the areas of registration of remotely sensed data and the test evaluation and porting of the Regional Validation Center software system, are presented.
Blumen, Marc Bernard; Vezina, Jean Philippe; Bequignon, Emilie; Chabolle, Frederic
2013-06-01
To determine whether snoring sound intensity measured after a first soft palate radiofrequency (RF) session for simple snoring helps predict the final result of the treatment. Observational retrospective study. We conducted a retrospective review of 105 subjects presenting with simple snoring or mild sleep apnea. All patients underwent two to three sessions of RF-assisted stiffening of the soft palate. In addition, uvulectomy was performed in case of a long uvula, and two paramedian trenches were created in the presence of palatal webbing. Snoring sound intensity was evaluated by the bed partner after each session. Eighty-six men and 19 women were included in the study. Mean age was 51.7 ± 9.8 years, and mean body mass index was 24.7 ± 4.4 kg/m(2) . The mean apnea/hypopnea index was 6.6 ± 4.2/h. The mean snoring sound intensity, as evaluated on a 10-cm visual analog scale (VAS), decreased from 8.2 ± 1.5 to 3.5 ± 2.2 after all sessions (P < .0001). A score of 3 was determined as being a score that satisfied the bed partner. Two groups were formed according to the final snoring sound intensity, using 3 as a threshold. Both groups had similar preoperative characteristics, but the snoring sound intensity was significantly lower after the first session in the group with final score <3 (P = .01). Similarly, a VAS score >7 after the first session was associated with a final score <3 in 30% of the cases. Snoring sound intensity after the first RF session helps predict the final outcome of RF-assisted stiffening of the soft palate for simple snoring. Copyright © 2012 The American Laryngological, Rhinological and Otological Society, Inc.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nichols, G.B.; Barrett, W.J.
1978-07-01
The report deals with the evaluation of an electrostatic precipitator (ESP) and associated environmental factors during the burning of solvent refined coal (SRC) in a boiler at Plant Mitchell of the Georgia Power Company. The effort was part of an overall study of the use of SRC in a full-scale electric power plant. Results of a performance evaluation of the ESP are reported and interpreted. Samples of stack emissions were collected with a Source Assessment Sampling System (SASS) train for chemical analysis: results of the analysis are to be reported later.
Inertial Motion Capture Costume Design Study
Szczęsna, Agnieszka; Skurowski, Przemysław; Lach, Ewa; Pruszowski, Przemysław; Pęszor, Damian; Paszkuta, Marcin; Słupik, Janusz; Lebek, Kamil; Janiak, Mateusz; Polański, Andrzej; Wojciechowski, Konrad
2017-01-01
The paper describes a scalable, wearable multi-sensor system for motion capture based on inertial measurement units (IMUs). Such a unit is composed of accelerometer, gyroscope and magnetometer. The final quality of an obtained motion arises from all the individual parts of the described system. The proposed system is a sequence of the following stages: sensor data acquisition, sensor orientation estimation, system calibration, pose estimation and data visualisation. The construction of the system’s architecture with the dataflow programming paradigm makes it easy to add, remove and replace the data processing steps. The modular architecture of the system allows an effortless introduction of a new sensor orientation estimation algorithms. The original contribution of the paper is the design study of the individual components used in the motion capture system. The two key steps of the system design are explored in this paper: the evaluation of sensors and algorithms for the orientation estimation. The three chosen algorithms have been implemented and investigated as part of the experiment. Due to the fact that the selection of the sensor has a significant impact on the final result, the sensor evaluation process is also explained and tested. The experimental results confirmed that the choice of sensor and orientation estimation algorithm affect the quality of the final results. PMID:28304337
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at Vintage on the Ponds in Delavan, WI. The objectives of the project were to evaluate: (1) the effectiveness of a Kinetico Macrolite® press...
This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at Spring Brook Mobile Home Park (SBMHP) in Wales, Maine. The objectives of the project were to evaluate: 1) the effectiveness of an arsenic...
This report documents the activities performed for and the results obtained from the first six months of the arsenic removal treatment technology demonstration project at the Chateau Estates Mobile Home Park at Springfield, OH. The objectives of the project are to evaluate the ef...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at Covered Wells in Tohono O’odham Nation, AZ. The main objective of the project was to evaluate the effectiveness of AdEdge Technologies’ ...
This report documents the activities performed and the results obtained for the EPA arsenic removal technology demonstration project at the Oak Manor Municipal Utility District (MUD) facility in Alvin, TX. The objectives of the project were to evaluate 1) the effectiveness of a ...
This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at Conneaut Lake Park (the Park) in Conneaut Lake, PA. The main objective of the project was to evaluate the effectiveness of AdEdge Techno...
ERIC Educational Resources Information Center
Belcher, Mary H.; And Others
The third party evaluation of the K-12 career education project RACE (Researched Activities for Career Education) focused on test results of students in four selected grades. A career education questionnaire was administered as a pre-test and again as a post-test to students in the third and sixth grades. Ninth and twelfth grade students were…
This report documents the activities performed for and the results obtained from the arsenic removal treatment technology demonstration project at the Clinton Christian School in Goshen, IN. The objectives of the project were to evaluate the effectiveness of AdEdge Technologies’...
ERIC Educational Resources Information Center
Segalas, Jordi; Mulder, Karel F.; Ferrer-Balas, Didac
2012-01-01
Purpose: The purpose of this paper is to study how experts on teaching sustainability in engineering education contextualize sustainability; also to evaluate the understanding of sustainability by engineering students. The final aim is to evaluate what pedagogy experts believe provides better opportunities for learning about sustainability in…
ERIC Educational Resources Information Center
Wolf, Patrick J.
2012-01-01
This report contains a summary of the findings from the various topical reports that comprise the author's comprehensive longitudinal study. As a summary, it does not include extensive details regarding the study samples and scientific methodologies employed in those topical studies. The research revealed a pattern of school choice results that…
Use of improved materials systems in marine piling : final report.
DOT National Transportation Integrated Search
1982-12-01
This report contains the results of a study to evaluate the feasibility of manufacturing precast, prestressed marine pile from polymer concrete, polymer impregnated concrete, internally sealed concrete and latex modified concrete. Included in the rep...
Procedures For Continuing Metropolitan Planning: Final Research Report
DOT National Transportation Integrated Search
1974-01-01
This report marks the conclusion of the third phase of the : Metropolitan Plan Evaluation Project. Findings of both phases two : and three are summarized here. More detailed and technical results : have been reported previously. : The continuing metr...
Label Review Training: Module 5: Course Final Quiz
Pesticide labels translate results of our extensive evaluations of pesticide products into conditions, directions and precautions that define parameters for use of a pesticide with the goal of ensuring protection of human health and the environment.
Probability of detection evaluation results for railroad tank cars : final report.
DOT National Transportation Integrated Search
2016-08-01
The Transportation Technology Center, Inc. (TTCI) used the approach developed for the National Aeronautics and Space : Association to determine the probability of detection (POD) for various nondestructive test (NDT) methods used during inspection : ...
Sensing systems efficiency evaluation and comparison for homeland security and homeland defense
NASA Astrophysics Data System (ADS)
Pakhomov, Alexander A.
2010-04-01
Designers and consumers of various security, intelligence, surveillance and reconnaissance (ISR) systems as well as various unattended ground sensors pay most attention to their commonly used performance characteristics such as probability of a target detection and probability of a false alarm. These characteristics are used for systems comparison and evaluation. However, it is not enough for end-users of these systems as well as for their total/final effectiveness assessment. This article presents and discusses a system approach to an efficiency estimation of the security and ISR systems. Presented approach aims at final result of the system's function and use. It allows setting up reasonable technical and structural requirements for the security and ISR systems, to make trustworthy comparison and practical application planning of such systems. It also allows finding forward-looking, perspective ways of systems development. Presented results can be guidance to both designers and consumers.
ERIC Educational Resources Information Center
Manitoba Dept. of Education and Training, Winnipeg. Curriculum Services Branch.
This report describes the June 1992 assessment of the Biologie 200 curriculum in schools in Manitoba, Canada. It contains a description and analysis of the test results and the teacher survey. The report also includes recommendations on ways to improve the Biologie 200 curriculum and how it is taught in the French Immersion program and…
An application of actuarial methods in psychiatric diagnosis.
Overall, J E; Higgins, C W
1977-10-01
An actuarial program for psychiatric diagnosis is evaluated for agreement with final clinical diagnosis in a series of 288 patients. The acturial program provides a probability differential diagnosis based on an analysis of history and background data, symptom rating profiles, and MMPI clinical scale profiles. The observed agreement with final clinical diagnosis is approximately 50% higher than previously reported for psychological testing in this same setting. The results emphasize the importance for psychologists of clinical interview and observation skills.
[Ecosystem services valuation of Qinghai Lake].
Jiang, Bo; Zhang, Lu; Ouyang, Zhi-yun
2015-10-01
Qinghai Lake is the largest inland and salt water lake in China, and provides important ecosystem services to beneficiaries. Economic valuation of wetland ecosystem services from Qinghai Lake can reveal the direct contribution of lake ecosystems to beneficiaries using economic data, which can advance the incorporation of wetland protection of Qinghai Lake into economic tradeoffs and decision analyses. In this paper, we established a final ecosystem services valuation system based on the underlying ecological mechanisms and regional socio-economic conditions. We then evaluated the eco-economic value provided by the wetlands at Qinghai Lake to beneficiaries in 2012 using the market value method, replacement cost method, zonal travel cost method, and contingent valuation method. According to the valuation result, the total economic values of the final ecosystem services provided by the wetlands at Qinghai Lake were estimated to be 6749.08 x 10(8) yuan RMB in 2012, among which the value of water storage service and climate regulation service were 4797.57 x 10(8) and 1929.34 x 10(8) yuan RMB, accounting for 71.1% and 28.6% of the total value, respectively. The economic value of the 8 final ecosystem services was ranked from greatest to lowest as: water storage service > climate regulation service > recreation and tourism service > non-use value > oxygen release service > raw material production service > carbon sequestration service > food production service. The evaluation result of this paper reflects the substantial value that the wetlands of Qinghai Lake provide to beneficiaries using monetary values, which has the potential to help increase wetland protection awareness among the public and decision-makers, and inform managers about ways to create ecological compensation incentives. The final ecosystem service evaluation system presented in this paper will offer guidance on separating intermediate services and final services, and establishing monitoring programs for dynamic ecosystem services valuation with the aim of helping improve management outcomes.
Northeast Inspection Services, Inc. boresonic inspection system evaluation. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nottingham, L.D.; Sabourin, P.F.; Presson, J.H.
1993-04-01
Turbine rotor reliability and remaining life assessment are continuing concerns to electric utilities. Over the years, boresonic inspection and evaluation have served as primary components in rotor remaining life assessment. Beginning with an evaluation of TREES by EPRI in 1982, a series of reports that document the detection and sizing capabilities of several boresonic systems have been made available. These studies should provide utilities with a better understanding of system performance and lead to improved reliability when predicting rotor remaining life. In 1990, the procedures followed for evaluating rotor boresonic performance capabilities were changed to transfer a greater portion ofmore » the data analysis function to the participating vendor. This change from previous policy was instituted so that the evaluation results would better reflect the ``final answer`` that a vendor would provide in a real rotor inspection and also to reduce the cost of an evaluation. Among the first vendors to participate in the new performance demonstration was Northeast Inspection Services, Inc. (NISI). The tests reported herein were conducted by NISI personnel under the guidelines of the new plan. Details of the new evaluation plan are also presented. Rotor bore blocks containing surface-connected fatigue cracks, embedded glass beads, and embedded radial-axial oriented disks were used in the evaluation. Data were collected during twenty-five independent passes through the blocks. The evaluation consisted of statistical characterization of the detection capabilities, flaw sizing and location accuracy, and repeatability of the inspection system. The results of the evaluation are included in this report.« less
FleetForward evaluation : final report
DOT National Transportation Integrated Search
2000-10-01
This document is the final report for the evaluation of the I-95 Corridor Coalitions FleetForward operational test. The objective of this test was to evaluate the usefulness of traffic flow data to motor carrier operations. Cambridge Systematics, in ...
Martin, Michael R.; Kopstein, Andrea; Janice, Joy M.
2010-01-01
There has been the impression amongst many observers that discussion of a grant application has little practical impact on the final priority scores. Rather the final score is largely dictated by the range of preliminary scores given by the assigned reviewers. The implication is that the preliminary and final scores are the same and the discussion has little impact. The purpose of this examination of the peer review process at the National Institutes of Health is to describe the relationship between preliminary priority scores of the assigned reviewers and the final priority score given by the scientific review group. This study also describes the practical importance of any differences in priority scores. Priority scores for a sample of standard (R01) research grant applications were used in this assessment. The results indicate that the preliminary meeting evaluation is positively correlated with the final meeting outcome but that they are on average significantly different. The results demonstrate that discussion at the meeting has an important practical impact on over 13% of the applications. PMID:21103331
[Distal radius fractures--retrospective quality control after conservative and operative therapy].
Sommer, C; Brendebach, L; Meier, R; Leutenegger, A
2001-01-01
The distal radius fracture is the most frequent fracture in the adult patient. The wide spectrum of different types of fracture and the coexisting factors make the choice for the optimal treatment difficult. As an interne quality control we retrospectively evaluated all patients with distal radius fractures treated in 1995 at our institution. The study included 69 adult patients with 71 distal radius fractures. After on average 26 months 58 patients with 59 fractures were clinically and radiologically evaluated. The patients were asked to give supplementary information about their follow-up treatment as well as any remaining physical difficulties and limitations in the daily life. All x-rays of the broken radius were carefully analysed and compared with the opposite side. The final results were evaluated according to the "Demerit Point System". Patients were treated with five different therapeutical methods. 76.3% of the patients showed a very good/good final result. In 56.7% of the cases secondary fracture dislocation occurred; the dislocation-rate of fractures treated with percutaneous k-wires was 93.3%! A clear correlation between secondary displacement and final results was found. A main factor for an optimal outcome is the anatomic restoration of length and axis of the distal radius as well as of joint congruency, also moderate angular deformities are well tolerated. Our collective showed an unexpected high rate of secondary displacement, especially in the k-wire group. The reasons for this unsatisfactory event are manifold: too optimistic indication, insufficient follow-up examination in the first four to six weeks, inconsequent change to a more stable fixation method in case of a secondary dislocation. The results of this retrospective evaluation had a major impact on our concept of treatment. The dorso-radial double-plate technique combined with bone graft will be more used in the future especially in younger patients. The new standardised concept is the base of a present prospective study.
Kuijpers, Wilma; Groen, Wim G; Oldenburg, Hester SA; Wouters, Michel WJM; Aaronson, Neil K
2015-01-01
Background MijnAVL (MyAVL) is an interactive portal being developed to empower cancer survivors. Literature review and focus groups yielded the selection of features such as access to the electronic medical record (EMR), patient reported outcomes (PROs) and related feedback, and a physical activity support program. Objective Our aim was to present a final design of MijnAVL based on (1) health professionals' evaluation of proposed features, (2) cancer survivors’ evaluation of a first draft, and (3) cancer survivors’ evaluation of a functional online prototype. Methods Professionals from various disciplines gave input to the content of and procedures related to MijnAVL. Subsequently, 16 cancer survivors participated in an interview to evaluate content and graphic design of a first draft (shown with screenshots). Finally, 7 survivors participated in a usability test with a fully functional prototype. They performed predefined tasks (eg, logging in, finding a test result, completing a questionnaire) while thinking aloud. Descriptive statistics and simple content analysis were used to analyze the data of both the interviews and the usability tests. Results Professionals supported access to the EMR (eg, histology reports, lab results, and their letters to general practitioners). They also informed the development of PROs and the physical activity support program. Based on the first draft, survivors selected the preferred graphic design, approved the features and provided suggestions for the content (eg, explanation of medical jargon, more concise texts, notification by emails). Usability tests revealed that it was relatively easy to navigate the website and use the different features. Recommendations included, among others, a frequently asked questions section and the use of hyperlinks between different parts of the website. Conclusions The development of MijnAVL, an interactive portal to empower breast and lung cancer survivors, was performed iteratively and involved multiple groups of end-users. This approach resulted in a usable and understandable final version. Its effectiveness should be determined in further research. PMID:25614924
ERIC Educational Resources Information Center
United Nations Educational, Scientific, and Cultural Organization, Santiago (Chile). Regional Office for Education in Latin America and the Caribbean.
The objectives of this seminar were to identify problems in evaluating literacy programs and to design a working strategy to confront them. Four presentations included national case studies from Brazil, Honduras, Nicaragua, and Venezuela. Central questions asked concerned who and what were evaluated and how were the results to be used. In Brazil,…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rothgeb, Stacey K; Colon, C.; Martin, E.
The Florida Solar Energy Center (FSEC) has completed a fourth year-long evaluation on residential hot water heating systems in a laboratory environment (east central Florida, hot-humid climate). This report contains a summary of research activities regarding the evaluation of two residential electric heat pump water heaters (HPWHs), a solar thermal system utilizing a polymer glazed absorber and a high efficiency natural gas system.
DOE Office of Scientific and Technical Information (OSTI.GOV)
C. Colon and E. Martin
The Florida Solar Energy Center (FSEC) has completed a fourth year-long evaluation on residential hot water heating systems in a laboratory environment (east central Florida, hot-humid climate). This report contains a summary of research activities regarding the evaluation of two residential electric heat pump water heaters (HPWHs), a solar thermal system utilizing a polymer glazed absorber and a high efficiency natural gas system.
NASA Astrophysics Data System (ADS)
Qiu, Dongdong; Liu, Peiqi
2017-04-01
Since being designated as an international tourist island, Hainan has become an overwhelmingly favored choice of real estate investment. This paper first constructed Hainan residential quarter function factor index system, then evaluated relevant factors, and finally solved the problem of factor importance ranking. In this specific case, the software MATLAB was used to facilitate AHP calculation. The evaluation results have guiding and referential value to both real estate developers and residential consumers.
Wang, Chaoliang; Huang, Sufang; Wang, Yingzhen; Sun, Xuesheng; Zhu, Tao; Li, Qiang; Lin, Chu
2015-01-01
We evaluated the long-term clinical results of acute complete acromioclavicular dislocations treated by reconstruction of the acromioclavicular and coracoclavicular ligament using trapezius muscle fascia. Open reduction and internal fixation was performed using the clavicular hook plate in 12 patients with acute complete acromioclavicular joint dislocation, and the acromioclavicular and coracoclavicular ligaments were reconstructed using trapezius muscle fascia. Radiographic evaluations were conducted postoperatively. We evaluated the functional results with constant scoring system and radiological results at the final follow-up visit. The mean Constant score at the final follow-up visit was 91.67 (range, 81 to 100). The results were excellent in eight patients (66.7%) and good in four patients (33.3%). Three patients with scores from 80 to 90 had mild pain during activity, but this did not affect the range of motion of the shoulder. All patients have returned to their preoperative work without any limitations. Compared with the contralateral side, radiography showed anatomical reposition in the vertical plane in all cases. The hook-plate fixation with ligament reconstruction was successful in treating AC dislocations. The acromioclavicular and coracoclavicular ligament were reconstructed by trapezius muscle fascia that keep the distal clavicle stable both vertically and horizontally after type III injuries.
Wang, Chaoliang; Huang, Sufang; Wang, Yingzhen; Sun, Xuesheng; Zhu, Tao; Li, Qiang; Lin, Chu
2015-01-01
We evaluated the long-term clinical results of acute complete acromioclavicular dislocations treated by reconstruction of the acromioclavicular and coracoclavicular ligament using trapezius muscle fascia. Open reduction and internal fixation was performed using the clavicular hook plate in 12 patients with acute complete acromioclavicular joint dislocation, and the acromioclavicular and coracoclavicular ligaments were reconstructed using trapezius muscle fascia. Radiographic evaluations were conducted postoperatively. We evaluated the functional results with constant scoring system and radiological results at the final follow-up visit. The mean Constant score at the final follow-up visit was 91.67 (range, 81 to 100). The results were excellent in eight patients (66.7%) and good in four patients (33.3%). Three patients with scores from 80 to 90 had mild pain during activity, but this did not affect the range of motion of the shoulder. All patients have returned to their preoperative work without any limitations. Compared with the contralateral side, radiography showed anatomical reposition in the vertical plane in all cases. The hook-plate fixation with ligament reconstruction was successful in treating AC dislocations. The acromioclavicular and coracoclavicular ligament were reconstructed by trapezius muscle fascia that keep the distal clavicle stable both vertically and horizontally after type III injuries. PMID:28352721
A RULE-BASED SYSTEM FOR EVALUATING FINAL COVERS FOR HAZARDOUS WASTE LANDFILLS
This chapter examines how rules are used as a knowledge representation formalism in the domain of hazardous waste management. A specific example from this domain involves performance evaluation of final covers used to close hazardous waste landfills. Final cover design and associ...
Clinical evaluation of final impressions from three-dimensional printed custom trays.
Sun, Yuchun; Chen, Hu; Li, Hong; Deng, Kehui; Zhao, Tian; Wang, Yong; Zhou, Yongsheng
2017-11-02
This study aimed to evaluate the quality of the final impressions taken by three-dimensional printed custom trays for edentulous patients. Custom trays were designed with or without saddle-shaped tissue stops and fabricated by three-dimensional printing techniques. Manually made trays with photocurable materials were produced as controls. Both 3D printed custom trays and manually made ones were used to take impressions from edentulous patients. After 3D scanning of the final impression, the impression materials were removed, thus the underneath tray surfaces were able to be scanned, allowing the thickness of the impression materials to be measured. Final impressions obtained by pre-border-molded 3D printed trays were scanned as references, to which the flange extension deviations and morphology deviations of the impressions taken by both 3D printed trays and manually made ones were calculated. The results showed that (1) impressions from 3D printed custom trays had better thickness distribution than that of manually made ones; (2) impression morphology deviations in non-marginal area were neither statistic different between 3D printed trays and manually made trays, nor between trays with and without tissue stops; and (3) final impressions taken by custom trays without pre-border-molding were tended to have insufficient flange extensions.
Hercules Aerospace flywheel test results
NASA Astrophysics Data System (ADS)
Steele, R. S., Jr.; Babelay, E. F., Jr.; Sutton, B. J.
1981-06-01
The detailed results of the spin test evaluation of the Hercules Aerospace flywheel at the Oak Ridge Flywheel Evaluation Laboratory (ORFEL) are presented. Details of the static evaluation with radiography and measures of weight, inertia and natural frequencies are included. The flywheel was spun four times with the maximum speed being increased with each run. During the final run, the flywheel achieved 372 rps and stored 0.714 kWhr of kinetic energy at 37 Whr/kg. The ultimate speed was limited by a composite transverse strength that was somewhat lower than that used in the design of the flywheel. This resulted in internal cracking of the flywheel and, eventually, the loss of material from the outer circumference.
DOT National Transportation Integrated Search
2015-05-01
The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP composite piles for load-bearing in bridges. This report covers Task 7, Final Report - Thesis. : This final report covers Tasks 1, 2, 3, 5 ...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-06
... index, some information is not publicly available, i.e., Confidential Business Information (CBI) or... INFORMATION CONTACT section to schedule your inspection. The Regional Office's official hours of business are... assumptions made about the relationship drive model results and, thus, are important in evaluating the result...
Code of Federal Regulations, 2012 CFR
2012-10-01
... following definitions apply: Alternatives analysis is a corridor level analysis which evaluates all... should include transit improvements lower in cost than the new start which result in a better ratio of... preparation of final construction plans (including construction management plans), detailed specifications...
Code of Federal Regulations, 2011 CFR
2011-10-01
... following definitions apply: Alternatives analysis is a corridor level analysis which evaluates all... should include transit improvements lower in cost than the new start which result in a better ratio of... preparation of final construction plans (including construction management plans), detailed specifications...
Code of Federal Regulations, 2010 CFR
2010-10-01
... following definitions apply: Alternatives analysis is a corridor level analysis which evaluates all... should include transit improvements lower in cost than the new start which result in a better ratio of... preparation of final construction plans (including construction management plans), detailed specifications...
Controller evaluation of initial data link terminal air traffic control services : final report
DOT National Transportation Integrated Search
1991-01-01
This document details the results the first Federal Aviation Administration : Technical Center investigation of the initial terminal air traffic control : services developed for transmission using Data Link technology. Initial Data : Link services we...
Using benefit indicators to evaluate ecosystem services resulting from restoration
Ecological restoration can reestablish ecosystem services that provide valuable social and environmental benefits. Final ecosystem goods and services (FEGS) are the goods and services that directly benefit people. Explicitly identifying the people who benefit and characterizing w...
Expectations and final evaluation of complete dentures by patients, dentist and dental technician.
Marachlioglou, C R M Z; Dos Santos, J F F; Cunha, V P P; Marchini, Leonardo
2010-07-01
There is a poor association between the dentist's evaluation of denture quality and patients' satisfaction with their dentures. Possible differences between dental professionals and patients' expectations might help explain differences in outcome evaluations. This study compared scores given by a dentist, a dental technician and patients for their expectations before and their final evaluation after complete dentures treatment. Twenty completely edentulous patients, a prosthodontist and a dental technician provided scores for the expected aesthetic and functional results of their dentures based on a visual analogue scale at baseline. Post-treatment completion ratings were given after adjustments, by dentist and patients. The dental technician provided post-treatment completion ratings after completing the dentures. The patients had higher expectations than the dental technician and the dentist perceived for both aesthetic and function (P < 0.001). The patients also presented higher post-treatment completion ratings than the dental professionals perceived for final aesthetics (P = 0.016, Kendall's W = 0.207) and function (P = 0.002, Kendall's W = 0.303). Only the dentist presented a statistically significant difference between expectations (lower) and final (higher) outcomes for aesthetics (P = 0.017) and function (P = 0.003). There was no correlation between expectations and post-treatment completion ratings according to the patients' age. There was also no correlation between the patients' gender and expectation scores. Patients presented higher expectations regarding their dentures than dental professionals. The dentist believed that dentures would bring fewer benefits than patients did, but his perception of denture benefits post-treatment was significantly higher than his expectations.
Qualitative Analysis of Written Reflections during a Teaching Certificate Program
Castleberry, Ashley N.; Payakachat, Nalin; Ashby, Sarah; Nolen, Amanda; Carle, Martha; Neill, Kathryn K.
2016-01-01
Objective. To evaluate the success of a teaching certificate program by qualitatively evaluating the content and extent of participants’ reflections. Methods. Two investigators independently identified themes within midpoint and final reflection essays across six program years. Each essay was evaluated to determine the extent of reflection in prompted teaching-related topic areas (strengths, weaknesses, assessment, feedback). Results. Twenty-eight themes were identified within 132 essays. Common themes encompassed content delivery, student assessment, personal successes, and challenges encountered. Deep reflection was exhibited, with 48% of essays achieving the highest level of critical reflection. Extent of reflection trended higher from midpoint to final essays, with significant increases in the strengths and feedback areas. Conclusion. The teaching certificate program fostered critical reflection and self-reported positive behavior change in teaching, thus providing a high-quality professional development opportunity. Such programs should strongly consider emphasizing critical reflection through required reflective exercises at multiple points within program curricula. PMID:26941436
A research of the community’s opening to the outside world
NASA Astrophysics Data System (ADS)
Xu, Lan; Liu, Xiangzhuo
2017-03-01
Closed residential areas, called community, the traffic network and result in various degrees of traffic congestion such as amputating, dead ends and T-shaped roads. In order to reveal the mechanism of the congestion, establish an effective evaluation index system and finally provide theoretical basis for the study of traffic congestion, we have done researches on factors for traffic congestion and have established a scientific evaluation index system combining experiences home and abroad, based on domestic congestion status. Firstly, we analyse the traffic network as the entry point, and then establish the evaluation model of road capacity with the method of AHP index system. Secondly, we divide the condition of urban congestion into 5 levels from congestion to smoothness. Besides, with VISSIM software, simulations about traffic capacity before and after community opening are carried out. Finally, we provide forward reasonable suggestions upon the combination of models and reality.
Estimation of 3D reconstruction errors in a stereo-vision system
NASA Astrophysics Data System (ADS)
Belhaoua, A.; Kohler, S.; Hirsch, E.
2009-06-01
The paper presents an approach for error estimation for the various steps of an automated 3D vision-based reconstruction procedure of manufactured workpieces. The process is based on a priori planning of the task and built around a cognitive intelligent sensory system using so-called Situation Graph Trees (SGT) as a planning tool. Such an automated quality control system requires the coordination of a set of complex processes performing sequentially data acquisition, its quantitative evaluation and the comparison with a reference model (e.g., CAD object model) in order to evaluate quantitatively the object. To ensure efficient quality control, the aim is to be able to state if reconstruction results fulfill tolerance rules or not. Thus, the goal is to evaluate independently the error for each step of the stereo-vision based 3D reconstruction (e.g., for calibration, contour segmentation, matching and reconstruction) and then to estimate the error for the whole system. In this contribution, we analyze particularly the segmentation error due to localization errors for extracted edge points supposed to belong to lines and curves composing the outline of the workpiece under evaluation. The fitting parameters describing these geometric features are used as quality measure to determine confidence intervals and finally to estimate the segmentation errors. These errors are then propagated through the whole reconstruction procedure, enabling to evaluate their effect on the final 3D reconstruction result, specifically on position uncertainties. Lastly, analysis of these error estimates enables to evaluate the quality of the 3D reconstruction, as illustrated by the shown experimental results.
ERIC Educational Resources Information Center
Wurbacher and Associates, Takoma Park, MD.
This report describes results and conclusions of a third-party evaluation of a 1-year demonstration project in Alexandria (Virginia) to develop "safety nets" for 12 people with disabilities who were either unemployed or with a history of unemployment. An Employment Security Specialist worked with these individuals and their families to:…
This report documents the activities performed and the results obtained from the one-year arsenic removal treatment technology demonstration project at the Big Sauk Lake Mobile Home Park (BSLMHP) in Sauk Centre, MN. The objectives of the project are to evaluate (1) the effective...
Data Analysis of the 1968-69 Survey of Compensatory Education (Title I). Final Report.
ERIC Educational Resources Information Center
Glass, Gene V.; And Others
In this report, the results of analyses of data from ESEA Title I Program evaluations collected in the 1969 Survey of Compensatory Education are presented. These data analyses bear on the evaluation of the operations and impact of the programs in 9236 school districts and 3219 elementary schools, involving 215,995 teachers of 5,733,976 pupils in…
ERIC Educational Resources Information Center
New York City Board of Education, Brooklyn, NY. Office of Educational Evaluation.
Presented in this report are a program description and the results of evaluation of the Basic Bilingual Program implemented at John Bowne High School in New York City during 1980-81. The program provided instruction in English as a Second Language, instruction in Spanish language skills, and bilingual instruction to high school students of limited…
ERIC Educational Resources Information Center
Al-Salam, Nabeel; Flynn, Donald L.
This report describes the results of a study of the cost and cost effectiveness of 27 summer reading programs, carried through as part of a large-scale evaluation of compensatory reading programs. Three other reports describe cost and cost-effectiveness studies of programs during the regular school year. On an instructional-hour basis, the total…
This report documents the activities performed during and the results obtained from the arsenic removal technology demonstration project at the Sunset Ranch Development in Homedale, ID. The objectives of the project are to evaluate: 1) the effectiveness of a point of use (POU) re...
ERIC Educational Resources Information Center
Conway, Jane; Brazil, Susan; Losurdo, Martin
2012-01-01
Globally, there has been attention given to addressing the workforce shortage in nursing. One strategy to respond to this has resulted in renewed emphasis on the development of career and education pathways for students in the final years of high school. An evaluation of the School Based New Apprenticeship (SBNA) initiative in nursing in a…
This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at Oregon Institute of Technology (OIT) at Klamath Falls, OR. The objectives of the project were to evaluate: (1) the effectiveness...
Computer-Based Tools for Evaluating Graphical User Interfaces
NASA Technical Reports Server (NTRS)
Moore, Loretta A.
1997-01-01
The user interface is the component of a software system that connects two very complex system: humans and computers. Each of these two systems impose certain requirements on the final product. The user is the judge of the usability and utility of the system; the computer software and hardware are the tools with which the interface is constructed. Mistakes are sometimes made in designing and developing user interfaces because the designers and developers have limited knowledge about human performance (e.g., problem solving, decision making, planning, and reasoning). Even those trained in user interface design make mistakes because they are unable to address all of the known requirements and constraints on design. Evaluation of the user inter-face is therefore a critical phase of the user interface development process. Evaluation should not be considered the final phase of design; but it should be part of an iterative design cycle with the output of evaluation being feed back into design. The goal of this research was to develop a set of computer-based tools for objectively evaluating graphical user interfaces. The research was organized into three phases. The first phase resulted in the development of an embedded evaluation tool which evaluates the usability of a graphical user interface based on a user's performance. An expert system to assist in the design and evaluation of user interfaces based upon rules and guidelines was developed during the second phase. During the final phase of the research an automatic layout tool to be used in the initial design of graphical inter- faces was developed. The research was coordinated with NASA Marshall Space Flight Center's Mission Operations Laboratory's efforts in developing onboard payload display specifications for the Space Station.
Abtahi, F; Ji, G; Lu, K; Rödby, K; Seoane, F
2015-01-01
Heart rate variability (HRV) biofeedback is a method based on paced breathing at specific rate called resonance frequency by giving online feedbacks from user respiration and its effect on HRV. Since the HRV is also influence by different factors like stress and emotions, stress related to an unfamiliar measurement device, cables and skin electrodes may cover the underling effect of such kind of intervention. Wearable systems are usually considered as intuitive solutions which are more familiar to the end-user and can help to improve usability and hence reducing the stress. In this work, a prototype of a knitted garment using intarsia technique is developed and evaluated. Results show the satisfactory level of quality for Electrocardiogram and thoracic electrical bioimpedance i.e. for respiration monitoring as a part of HRV biofeedback system. Using intarsia technique and conductive yarn for making the connection instead of cables will reduce the complexity of fabrication in textile production and hence reduce the final costs in a final commercial product. Further development of garment and Android application is ongoing and usability and efficiency of final prototype will be evaluated in detail.
Moradi, Babak; Schönit, Eva; Nierhoff, Corinna; Hagmann, Sébastien; Oberle, Doris; Gotterbarm, Tobias; Schmitt, Holger; Zeifang, Felix
2012-12-01
The purpose of this study was to evaluate the overall long-term improvement of autologous chondrocyte implantation (ACI) treatment in terms of patient satisfaction, clinical assessment, and magnetic resonance imaging (MRI) evaluation. Furthermore, we aimed to assess the impact of independent variables on clinical outcomes and patient satisfaction. We evaluated 23 patients (mean age, 30.5 ± 8.2 years) with full-thickness chondral lesions of the distal femur who underwent first-generation ACI with periosteum between 1997 and 2004. The Lysholm score, Tegner activity score, subjective International Knee Documentation Committee score, numeric rating scale score, and Short Form 36 score were used for clinical assessment preoperatively, at 1 year postoperatively, and at 7 to 14 years (mean, 9.9 years) after surgery. MRI was performed to evaluate the cartilage preoperatively and at final follow-up, by use of the Magnetic Resonance Observation of Cartilage Repair Tissue (MOCART) score. ACI resulted in a substantial improvement in all clinical outcome parameters, even as much as 14 years after implantation, although a small deterioration was noticed between intermediate and final evaluations in some outcome parameters. Of the patients, 73.1% stated that they would undergo the operation again. Younger patients with a shorter duration of preoperative symptoms and smaller defect sizes benefited most. MRI findings confirmed complete defect filling in 52.3% of the patients at final follow-up. Our long-term results confirm that first-generation ACI is an effective treatment for large full-thickness chondral and osteochondral lesions of the knee joint. Younger patients with a shorter duration of preoperative symptoms and smaller defect size benefited most in our study. Level IV, therapeutic case series. Copyright © 2012 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.
Apollo experience report: Mission evaluation team postflight documentation
NASA Technical Reports Server (NTRS)
Dodson, J. W.; Cordiner, D. H.
1975-01-01
The various postflight reports prepared by the mission evaluation team, including the final mission evaluation report, report supplements, anomaly reports, and the 5-day mission report, are described. The procedures for preparing each report from the inputs of the various disciplines are explained, and the general method of reporting postflight results is discussed. Recommendations for postflight documentation in future space programs are included. The official requirements for postflight documentation and a typical example of an anomaly report are provided as appendixes.
Human Factors Experiments for Data Link : Final Report
DOT National Transportation Integrated Search
1975-11-01
This report describes the results of a series of experiments to evaluate cockpit Input/Output devices for Data Link as Phase I of a larger project to explore all facets of the digital transmission of air traffic control information. Following prelimi...
Micro-Deval coarse aggregate test evaluation : final report.
DOT National Transportation Integrated Search
2001-05-01
Studded tire use in Oregon results in millions of dollars of pavement damage annually. Accurate tests are needed to qualify durable aggregate for pavements to resist studded tire damage. ODOT currently uses the Los Angeles abrasion test as one of the...
Wireless data collection system for travel time estimation and traffic performance evaluation.
DOT National Transportation Integrated Search
2012-05-01
This report presents the results of the third and final research and development project of an implementable wireless : travel time data collection system. Utilizing Bluetooth wireless technology as a platform, the prior projects focused on : data co...
Evaluation of fuel usage factors in highway construction in Oregon : final report.
DOT National Transportation Integrated Search
2010-05-01
Prices for different construction materials change frequently. In recent years, the price for these different materials has dramatically increased. This result leads contractors to inflate the bid price for a construction project in order to cover th...
Statistical methods for the quality control of steam cured concrete : final report.
DOT National Transportation Integrated Search
1971-01-01
Concrete strength test results from three prestressing plants utilizing steam curing were evaluated statistically in terms of the concrete as received and the effectiveness of the plants' steaming procedures. Control charts were prepared to show tren...
NASA Astrophysics Data System (ADS)
Wen, Di; Ding, Xiaoqing
2003-12-01
In this paper we propose a general framework for character segmentation in complex multilingual documents, which is an endeavor to combine the traditionally separated segmentation and recognition processes into a cooperative system. The framework contains three basic steps: Dissection, Local Optimization and Global Optimization, which are designed to fuse various properties of the segmentation hypotheses hierarchically into a composite evaluation to decide the final recognition results. Experimental results show that this framework is general enough to be applied in variety of documents. A sample system based on this framework to recognize Chinese, Japanese and Korean documents and experimental performance is reported finally.
Hanford double shell waste tank corrosion studies - final report FY2014
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wiersma, B. J.; Fuentes, R. E.; Hicks, K.
2014-12-19
SRNL tasks for FY14 included studies to evaluate the susceptibility of carbon steel to vapor space corrosion (VSC), liquid-air interface (LAI) corrosion, and pitting corrosion. Additionally, SRNL evaluated the susceptibility of carbon steel to pitting corrosion under buffered waste conditions, with the objective of determining the adequate amount of inhibitor (e.g., nitrite) necessary to mitigate pitting corrosion. Other CPP experiments were performed in historical waste simulants and the results were compared to previously gathered results. The results of these activities were utilized to assess the robustness of the standardized CPP protocol
Space Shuttle Avionics: a Redundant IMU On-Board Checkout and Redundancy Management System
NASA Technical Reports Server (NTRS)
Mckern, R. A.; Brown, D. G.; Dove, D. W.; Gilmore, J. P.; Landey, M. E.; Musoff, H.; Amand, J. S.; Vincent, K. T., Jr.
1972-01-01
A failure detection and isolation philosophy applicable to multiple off-the-shelf gimbaled IMUs are discussed. The equations developed are implemented and evaluated with actual shuttle trajectory simulations. The results of these simulations are presented for both powered and unpowered flight phases and at operational levels of four, three, and two IMUs. A multiple system checkout philosophy is developed and simulation results presented. The final task develops a laboratory test plan and defines the hardware and software requirements to implement an actual multiple system and evaluate the interim study results for space shuttle application.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-19
... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Final Written Re-Evaluation for... for Sikorsky Memorial Airport in Stratford, Connecticut. ADDRESSES: The Written Re-Evaluation document... Sikorsky Memorial Airport involving Runway Safety Areas and other airfield improvements. This Written Re...
Evaluation of the Michigan Public School Academy Initiative: Final Report [and] Executive Summary.
ERIC Educational Resources Information Center
Horn, Jerry; Miron, Gary
This is the final report of a one-year evaluation of the Michigan Public School Academy (PSA) initiative. The evaluation involved both formative and summative evaluations and used both qualitative and quantitative methods. The study was conducted between October 1997 and December 1998. Data-collection methods included a charter-school survey and a…
NASA Astrophysics Data System (ADS)
Byrd, Gene G.; Byrd, Dana
2017-06-01
The two main purposes of this paper on improving Ay101 courses are presentations of (1) some very effective single changes and (2) a method to improve teaching by making just single changes which are evaluated statistically versus a control group class. We show how simple statistical comparison can be done even with Excel in Windows. Of course, other more sophisticated and powerful methods could be used if available. One of several examples to be discussed on our poster is our modification of an online introductory astronomy lab course evaluated by the multiple choice final exam. We composed questions related to the learning objectives of the course modules (LOQs). Students could “talk to themselves” by discursively answering these for extra credit prior to the final. Results were compared to an otherwise identical previous unmodified class. Modified classes showed statistically much better final exam average scores (78% vs. 66%). This modification helped those students who most need help. Students in the lower third of the class preferentially answered the LOQs to improve their scores and the class average on the exam. These results also show the effectiveness of relevant extra credit work. Other examples will be discussed as specific examples of evaluating improvement by making one change and then testing it versus a control. Essentially, this is an evolutionary approach in which single favorable “mutations” are retained and the unfavorable removed. The temptation to make more than one change each time must be resisted!
NASA Astrophysics Data System (ADS)
Kato, T.; Arafune, T.; Washio, T.; Nakagawa, A.; Ogawa, Y.; Tominaga, T.; Sakuma, I.; Kobayashi, E.
2014-08-01
Recently, fluid jets have become widely used in medical devices and have been created and evaluated in clinical environments. Such devices are classified into two broad groups; those adopting continuous jets and those adopting discrete (or pulsed) jets. We developed a discrete jet device for brain cancer treatment, called a laser-induced liquid jet (LILJ) system. Although several studies have evaluated the availability and described the treatment mechanisms of fluid jet devices, the mechanisms of the fluid and injected material remain under-investigated. In this paper, we report the mechanism of frequent pulsejet injections into a viscoelastic biological material; namely, simulated gelatin brain tissue. The mechanism is evaluated by the injection depth, an easily measured parameter. To explain the injection mechanism, we propose that the pulsejet is pressured by forces introduced by resistance on the side surface of the hole and the reaction force proportionate to the injection depth. The pulsejet generated and propagated cracks in the gelatin, and the resistance eventually fractured the side surface of the hole. We evaluated the proposed model by measuring the behavior of pulsejets injected into gelatin by the LILJ. From the results, the following conclusions were obtained. First, the proposed model accurately describes the behavior of the injected pulsejet. Second, whether the hole or crack growth largely increases the final injection depth can be evaluated from differences in the decay constant. Finally, crack growth increases the final injection depth when the number of the injected pulsejets is greater than the inverse of the decay constant.
Advanced extravehicular protective systems study, volume 2
NASA Technical Reports Server (NTRS)
Sutton, J. G.; Heimlich, P. F.; Tepper, E. H.
1972-01-01
The results of the subsystem studies are presented. Initial identification and evaluation of candidate subsystem concepts in the area of thermal control, humidity control, CO2 control/O2 supply, contaminant control and power supply are discussed. The candidate concepts that were judged to be obviously noncompetitive were deleted from further consideration and the remaining candidate concepts were carried into the go/no go evaluation. A detailed parametric analysis of each of the thermal/humidity control and CO2 control/O2 supply subsystem concepts which passed the go/no go evaluation is described. Based upon the results of the parametric analyses, primary and secondary evaluations of the remaining candidate concepts were conducted. These results and the subsystem recommendations emanating from these results are discussed. In addition, the parametric analyses of the recommended subsystem concepts were updated to reflect the final AEPS specification requirements. A detailed discussion regarding the selection of the AEPS operating pressure level is presented.
DOT National Transportation Integrated Search
1982-01-01
The report describes the results of the load tests and summarizes the collection of data on the dimensional changes and moisture content of the press-lain members and the number and types of vehicles using the bridge. The results of the load tests su...
Whiskey springs long-term coast redwood density management; final growth, sprout, and yield results
Lynn A. Webb; James L. Lindquist; Erik Wahl; Andrew Hubb
2012-01-01
Multi-decadal studies of commercial and precommercial thinning in redwood stands are rare and consequently of value. The Whiskey Springs study at Jackson Demonstration State Forest has a data set spanning 35 years. In addition to growth and yield response to commercial thinning, the results provide important information for evaluating regeneration and...
Alternative Fuel Fleet Vehicle Evaluations | Transportation Research | NREL
renewable resources. The renewable diesel under study, produced by Solazyme, is an algae-derived drop-in on the engines and fuel systems of Ford cargo vans and Mack tractor trucks. The results of this study International Truck and Engine Corporation. The results of this study are featured in the Final Operability and
Use of the Marshall Space Flight Center solar simulator in collector performance evaluation
NASA Technical Reports Server (NTRS)
Humphries, W. R.
1978-01-01
Actual measured values from simulator checkout tests are detailed. Problems encountered during initial startup are discussed and solutions described. Techniques utilized to evaluate collector performance from simulator test data are given. Performance data generated in the simulator are compared to equivalent data generated during natural outdoor testing. Finally, a summary of collector performance parameters generated to date as a result of simulator testing are given.
Evaluation of an Integrated Read-Out Layer Prototype
DOE Office of Scientific and Technical Information (OSTI.GOV)
Abu-Ajamieh, Fayez
2011-07-01
This thesis presents evaluation results of an Integrated Read-out Layer (IRL), a proposed concept in scintillator-based calorimetry intended to meet the exceptional calorimetric requirements of the envisaged International Linear Collider (ILC). This study presents a full characterization of the prototype IRL, including exploration of relevant parameters, calibration performance, and the uniformity of response. The study represents proof of the IRL concept. Finally, proposed design enhancements are presented.
Evaluation of an Integrated Read-Out Layer Prototype
DOE Office of Scientific and Technical Information (OSTI.GOV)
Abu-Ajamieh, Fayez; /NIU
2011-08-18
This thesis presents evaluation results of an Integrated Read-out Layer (IRL), a proposed concept in scintillator-based calorimetry intended to meet the exceptional calorimetric requirements of the envisaged International Linear Collider (ILC). This study presents a full characterization of the prototype IRL, including exploration of relevant parameters, calibration performance, and the uniformity of response. The study represents proof of the IRL concept. Finally, proposed design enhancements are presented.
Overview of CEV Thermal Protection System Seal Development
NASA Technical Reports Server (NTRS)
DeMange, Jeff; Taylor, Shawn; Dunlap, Patrick; Steinetz, Bruce; Delgado, Irebert; Finkbeiner, Josh; Mayer, John
2009-01-01
NASA GRC supporting design, development, and implementation of numerous seal systems for the Orion CEV: a) HS-to-BS interface. b) Compression pad. HS-to-BS Interface Seal System: a) design has evolved as a result of changes with the CEV TPS. b) Seal system is currently under development/evaluation. Coupon level tests, Arc jet tests, and Validation test development. Compression Pad: a) Finalizing design options. b) Evaluating material candidates.
The final days of Solar Max - Lessons learned from engineering evaluation tests
NASA Technical Reports Server (NTRS)
Donnelly, Michael L.; Croft, John W.; Ward, David K.; Thames, Michael A.
1990-01-01
End-of-life engineering evaluation tests were performed on Solar Max between October and November 1989. The tests included four-wheel control law operation; reaction wheel rundowns; modular power subsystem standard power regulator unit voltage-temperature level tests; battery rundown/2nd plateau determination; high gain antenna retraction and jettison; and solar array jettison. This paper presents these tests, their results, and the lessons learned from them.
Evaluation of laminar flow control system concepts for subsonic commercial transport aircraft
NASA Technical Reports Server (NTRS)
1978-01-01
A two-year study conducted to establish a basis for industry decisions on the application of laminar flow control (LFC) to future commercial transports was presented. Areas of investigation included: (1) mission definition and baseline selection; (2) concepts evaluations; and (3) LFC transport configuration selection and component design. The development and evaluation of competing design concepts was conducted in the areas of aerodynamics, structures and materials, and systems. The results of supporting wind tunnel and laboratory testing on a full-scale LFC wing panel, suction surface opening concepts and structural samples were included. A final LFC transport was configured in incorporating the results of concept evaluation studies and potential performance improvements were assessed. Remaining problems together with recommendations for future research are discussed.
Hercules Aerospace flywheel test results
DOE Office of Scientific and Technical Information (OSTI.GOV)
Steele, R.S. Jr.; Babelay, E.F. Jr.; Sutton, B.J.
1981-06-01
The detailed results of the spin test evaluation of the Hercules Aerospace flywheel at the Oak Ridge Flywheel Evaluation Laboratory (ORFEL) are presented. Details of the static evaluation with radiography and measures of weight, inertia, and natural frequencies are included. The flywheel was spun four times with the maximum speed being increased with each run. During the final run, the flywheel achieved 372 rps and stored 0.714 kWhr of kinetic energy at 37 Whr/kg. The ultimate speed was limited by a composite transverse strength that was somewhat lower than that used in the design of the flywheel. This resulted inmore » internal cracking of the flywheel and, eventually, the loss of material from the outer circumference.« less
Evian, C R; Ijsselmuiden, C B; Padayachee, G N; Hurwitz, H S
1990-11-03
In January 1989, the Johannesburg City Health Department developed an AIDS education poster. The poster was adapted from a cartoon in the Sowetan newspaper and was formally evaluated before its final production. As a result of this evaluation further editing and restructuring of the poster proved necessary. The methodology used in the evaluation is outlined, and some of the findings that emerged during the evaluation are discussed, since few formal evaluations of health education material seem to have been documented in South Africa. This study highlights the importance of formative evaluation of printed health educational media by a sample of the target audience before production and distribution.
DOT National Transportation Integrated Search
1998-09-01
Commercial Vehicle Administrative (CVO) Processes Cross-Cutting report summarizes and interprets the results of several Field Operational Tests (FOTs) conducted to evaluate systems that increase the efficiency of commercial vehicle administrative pro...
Brinkman, David J; Tichelaar, Jelle; Graaf, Sanne; Otten, René H J; Richir, Milan C; van Agtmael, Michiel A
2018-04-01
Prescribing errors are an important cause of patient safety incidents and are frequently caused by junior doctors. This might be because the prescribing competence of final-year medical students is poor as a result of inadequate clinical pharmacology and therapeutic (CPT) education. We reviewed the literature to investigate which prescribing competencies medical students should have acquired in order to prescribe safely and effectively, and whether these have been attained by the time they graduate. PubMed, EMBASE and ERIC databases were searched from the earliest dates up to and including January 2017, using the terms 'prescribing', 'competence' and 'medical students' in combination. Articles describing or evaluating essential prescribing competencies of final-year medical students were included. Twenty-five articles describing, and 47 articles evaluating, the prescribing competencies of final-year students were included. Although there seems to be some agreement, we found no clear consensus among CPT teachers on which prescribing competencies medical students should have when they graduate. Studies showed that students had a general lack of preparedness, self-confidence, knowledge and skills, specifically regarding general and antimicrobial prescribing and pharmacovigilance. However, the results should be interpreted with caution, given the heterogeneity and methodological weaknesses of the included studies. There is considerable evidence that final-year students have insufficient competencies to prescribe safely and effectively, although there is a need for a greater consensus among CPT teachers on the required competencies. Changes in undergraduate CPT education are urgently required in order to improve the prescribing of future doctors. © 2018 VU University Medical Centre. British Journal of Clinical Pharmacology published by John Wiley & Sons Ltd on behalf of British Pharmacological Society.
Kuijpers, Wilma; Groen, Wim G; Oldenburg, Hester Sa; Wouters, Michel Wjm; Aaronson, Neil K; van Harten, Wim H
2015-01-22
MijnAVL (MyAVL) is an interactive portal being developed to empower cancer survivors. Literature review and focus groups yielded the selection of features such as access to the electronic medical record (EMR), patient reported outcomes (PROs) and related feedback, and a physical activity support program. Our aim was to present a final design of MijnAVL based on (1) health professionals' evaluation of proposed features, (2) cancer survivors' evaluation of a first draft, and (3) cancer survivors' evaluation of a functional online prototype. Professionals from various disciplines gave input to the content of and procedures related to MijnAVL. Subsequently, 16 cancer survivors participated in an interview to evaluate content and graphic design of a first draft (shown with screenshots). Finally, 7 survivors participated in a usability test with a fully functional prototype. They performed predefined tasks (eg, logging in, finding a test result, completing a questionnaire) while thinking aloud. Descriptive statistics and simple content analysis were used to analyze the data of both the interviews and the usability tests. Professionals supported access to the EMR (eg, histology reports, lab results, and their letters to general practitioners). They also informed the development of PROs and the physical activity support program. Based on the first draft, survivors selected the preferred graphic design, approved the features and provided suggestions for the content (eg, explanation of medical jargon, more concise texts, notification by emails). Usability tests revealed that it was relatively easy to navigate the website and use the different features. Recommendations included, among others, a frequently asked questions section and the use of hyperlinks between different parts of the website. The development of MijnAVL, an interactive portal to empower breast and lung cancer survivors, was performed iteratively and involved multiple groups of end-users. This approach resulted in a usable and understandable final version. Its effectiveness should be determined in further research.
Final Evaluation for the Neighborhood Educational Cultural Centerette.
ERIC Educational Resources Information Center
Frost, Patricia
Contained in this report is the final evaluation for the Neighborhood Educational Cultural Centerette Project. Objectives of the research project were to: (1) investigate, experiment with, create, and evaluate methods of instruction curriculum, and materials; analyze pupil learning styles and teacher-teaching styles; and to provide staff growth…
ERIC Educational Resources Information Center
Southern Univ. and Agricultural and Mechanical Coll., Baton Rouge, LA.
This final report of the third year of the Southern University-Tulane University Regional Head Start Evaluation and Research Center is a statement of activities engaged in since September 1968. Chapter I includes an introduction and description of the centers; Chapter II, evaluation guidelines, test battery, quality control, evaluation design and…
Sié, Essoh J.B.; Kacou, Aka D.; Traoré, A.; Mobiot, C.; Bamba, I.; Lambin, Y.
2014-01-01
Objective To evaluate the results of multiple closed intramedullary Kirschner wiring via a supracondylar entry point for humeral shaft fractures. Patients and methods The charts of 37 patients with humeral shaft fractures treated with the Hackethal's technique between January 2007 and December 2011 were reviewed retrospectively. The operation was performed with the patient lying in supine (n = 22) or lateral (n = 15) position. The elbow was flexed over an articulated support with the arm kept in a vertical position. Thirty-three patients were available for final evaluation with a mean follow-up delay of 14 (range, 6–24) months. We were concerned about fracture union, range of motion of the shoulder and the elbow, and complications. Final evaluation used the criteria by Qidwai. Results Bone union rate was 94%. Restriction of ranges of motion of the shoulder more than 20° was noticed in two patients due to protruding wires. Three patients developed limitation of elbow extension owing to backing out of the wires. The overall results were excellent (n = 26; 79%), good (n = 4; 12%), and poor (n = 3; 9%). Conclusion Closed Hackethal's technique using K-wires gives satisfactory results in terms of bone union and elbow and shoulder function in selected humeral shaft fractures. The articulated support precludes the transolecranon traction. PMID:25983469
NASA Astrophysics Data System (ADS)
Pokhodun, A. I.; Ivanova, A. G.; Duysebayeva, K. K.; Ivanova, K. P.
2015-01-01
Regional comparison of type S thermocouples at the freezing points of zinc, aluminium and copper was initiated by COOMET TC1.1-10 (the technical committee of COOMET `Thermometry and thermal physics'). Three NMI take part in COOMET regional comparison: D I Mendeleev Institute for Metrology (VNIIM) (Russian Federation), National Scientific Centre (Institute of Metrology) (NSC IM, Ukraine), Republic State Enterprise (Kazakhstan Institute of Metrology) (KazInMetr, Republic of Kazakhstan). VNIIM (Russia) was chosen as the coordinator-pilot of the regional comparison. A star type comparison was used. The participants: KazInMetr and NSC IM constructed the type S thermocouples and calibrated them in three fixed points: zinc, aluminum and copper points, using methods of ITS-90 fixed point realizations. The thermocouples have been sent to VNIIM together with the results of the calibration at three fixed points, with the values of the inhomogeneity at temperature 200 °C and the uncertainty evaluations of the results. For calibration of thermocouples the same VNIIM fixed points cells were used. Participating laboratories repeated the calibration of thermocouples after its returning in zinc, aluminum and copper points to determine the stability of its results. In result of the comparison was to evaluate the equivalence of the type S thermocouples calibration in fixed points by NMIs to confirm corresponding lines of international website for NMI's Calibration and Measurement Capabilities (CMC). This paper is the final report of the comparison including analysis of the uncertainty of measurement results. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCT WG-KC, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
NASA Technical Reports Server (NTRS)
1981-01-01
The Wing Planform Study and Final Configuration Selection Task of the Integrated Application of Active Controls (IAAC) Technology Project within the Energy Efficient Transport Program is documented. Application of Active Controls Technology (ACT) in combination with increased wing span resulted in significant improvements over the Conventional Baseline Configuration (Baseline) and the Initial ACT Configuration previously established. The configurations use the same levels of technology, takeoff gross weight, and payload as the Baseline. The Final ACT Configuration (Model 768-107) incorporates pitch-augmented stability (which enabled an approximately 10% aft shift in cruise center of gravity and a 44% reduction in horizontal tail size), lateral/directional-augmented stability, an angle-of-attack limiter, and wing-load alleviation. Flutter-mode control was not beneficial for this configuration. This resulted in an 890 kg (1960 lb) reduction in airplane takeoff gross weight and a 9.8% improvement in cruise lift/drag. At the Baseline mission range (3589 km 1938 nmi), this amounts to 10% block-fuel reduction. Results of this task strongly indicate that the IAAC Project should proceed with the Final ACT evaluation, and begin the required control system development and test.
NASA Technical Reports Server (NTRS)
Brown, S. C.; Hardy, G. H.; Hindson, W. S.
1983-01-01
As part of a comprehensive flight-test program of STOL operating systems for the terminal area, an automatic landing system was developed and evaluated for a light wing loading turboprop aircraft. The aircraft utilized an onboard advanced digital avionics system. Flight tests were conducted at a facility that included a STOL runway site with a microwave landing system. Longitudinal flight-test results were presented and compared with available (basically CTOL) criteria. These comparisons were augmented by results from a comprehensive simulation of the controlled aircraft which included representations of navigation errors that were encountered in flight and atmospheric disturbances. Acceptable performance on final approach and at touchdown was achieved by the autoland (automatic landing) system for the moderate winds and turbulence conditions encountered in flight. However, some touchdown performance goals were marginally achieved, and simulation results suggested that difficulties could be encountered in the presence of more extreme atmospheric conditions. Suggestions were made for improving performance under those more extreme conditions.
Presenting an Evaluation Model for the Cancer Registry Software.
Moghaddasi, Hamid; Asadi, Farkhondeh; Rabiei, Reza; Rahimi, Farough; Shahbodaghi, Reihaneh
2017-12-01
As cancer is increasingly growing, cancer registry is of great importance as the main core of cancer control programs, and many different software has been designed for this purpose. Therefore, establishing a comprehensive evaluation model is essential to evaluate and compare a wide range of such software. In this study, the criteria of the cancer registry software have been determined by studying the documents and two functional software of this field. The evaluation tool was a checklist and in order to validate the model, this checklist was presented to experts in the form of a questionnaire. To analyze the results of validation, an agreed coefficient of %75 was determined in order to apply changes. Finally, when the model was approved, the final version of the evaluation model for the cancer registry software was presented. The evaluation model of this study contains tool and method of evaluation. The evaluation tool is a checklist including the general and specific criteria of the cancer registry software along with their sub-criteria. The evaluation method of this study was chosen as a criteria-based evaluation method based on the findings. The model of this study encompasses various dimensions of cancer registry software and a proper method for evaluating it. The strong point of this evaluation model is the separation between general criteria and the specific ones, while trying to fulfill the comprehensiveness of the criteria. Since this model has been validated, it can be used as a standard to evaluate the cancer registry software.
SIGMA Final Report. Volume V, Part 1-3. Introduction, Functional Description and Evaluation.
1982-05-01
AD-AlSb 359 UNIVERSITY OF SOUTHERN CALIFORNIA MARINA DEL REY INFO-ETC F/6 17/2 SIGMA FINAL REPORT . VOLUME V. PART 1-3. INTRODUCTION. FUNCTIONA-ETC(U...EIIIIIIIIIIIIE IIIEIIIIEIIIII 111111111111flfflfflEllllllEEllEE H ~28 ",2,5 11111 ..25 .411111 ii1.6 MICROCOPY RESOLUTION TEST CHAFT N W MME Final Report ...Volume V, Parts 1, 2, and 3 ISI/FiR-82-94 SIGMA Final Report : Introduction, Functional Description, and Evaluation Robert Stotz David Wilczynski
Probabilistic Multi-Factor Interaction Model for Complex Material Behavior
NASA Technical Reports Server (NTRS)
Chamis, Christos C.; Abumeri, Galib H.
2008-01-01
The Multi-Factor Interaction Model (MFIM) is used to evaluate the divot weight (foam weight ejected) from the launch external tanks. The multi-factor has sufficient degrees of freedom to evaluate a large number of factors that may contribute to the divot ejection. It also accommodates all interactions by its product form. Each factor has an exponent that satisfies only two points, the initial and final points. The exponent describes a monotonic path from the initial condition to the final. The exponent values are selected so that the described path makes sense in the absence of experimental data. In the present investigation the data used was obtained by testing simulated specimens in launching conditions. Results show that the MFIM is an effective method of describing the divot weight ejected under the conditions investigated.
Probabilistic Multi-Factor Interaction Model for Complex Material Behavior
NASA Technical Reports Server (NTRS)
Chamis, Christos C.; Abumeri, Galib H.
2008-01-01
The Multi-Factor Interaction Model (MFIM) is used to evaluate the divot weight (foam weight ejected) from the launch external tanks. The multi-factor has sufficient degrees of freedom to evaluate a large number of factors that may contribute to the divot ejection. It also accommodates all interactions by its product form. Each factor has an exponent that satisfies only two points the initial and final points. The exponent describes a monotonic path from the initial condition to the final. The exponent values are selected so that the described path makes sense in the absence of experimental data. In the present investigation, the data used was obtained by testing simulated specimens in launching conditions. Results show that the MFIM is an effective method of describing the divot weight ejected under the conditions investigated.
Strain-energy release rate analysis of a laminate with a postbuckled delamination
NASA Technical Reports Server (NTRS)
Whitcomb, John D.; Shivakumar, K. N.
1987-01-01
The objectives are to present the derivation of the new virtual crack closure technique, evaluate the accuracy of the technique, and finally to present the results of a limited parametric study of laminates with a postbuckled delamination. Although the new virtual crack closure technique is general, only homogeneous, isotropic laminates were analyzed. This was to eliminate the variation of flexural stiffness with orientation, which occurs even for quasi-isotropic laminates. This made it easier to identify the effect of geometrical parameters on G. The new virtual crack closure technique is derived. Then the specimen configurations are described. Next, the stress analyses is discussed. Finally, the virtual crack closure technique is evaluated and then used to calculate the distribution of G along the delamination front of several laminates with a postbuckled delamination.
Computer aided design of Langasite resonant cantilevers: analytical models and simulations
NASA Astrophysics Data System (ADS)
Tellier, C. R.; Leblois, T. G.; Durand, S.
2010-05-01
Analytical models for the piezoelectric excitation and for the wet micromachining of resonant cantilevers are proposed. Firstly, computations of metrological performances of micro-resonators allow us to select special cuts and special alignment of the cantilevers. Secondly the self-elaborated simulator TENSOSIM based on the kinematic and tensorial model furnishes etching shapes of cantilevers. As the result the number of selected cuts is reduced. Finally the simulator COMSOL® is used to evaluate the influence of final etching shape on metrological performances and especially on the resonance frequency. Changes in frequency are evaluated and deviating behaviours of structures with less favourable built-ins are tested showing that the X cut is the best cut for LGS resonant cantilevers vibrating in flexural modes (type 1 and type 2) or in torsion mode.
Minimally invasive reconstruction of acute type IV and Type V acromioclavicular separations.
Katsenis, Dimitris L; Stamoulis, Dimitris; Begkas, Dimitris; Tsamados, Stamatis
2015-04-01
The goal of this study was to evaluate the midterm radiologic, clinical, and functional results of the early reconstruction of the severe acromioclavicular joint dislocation using the flipptack fixation button technique. Between December 2006 and December 2009, one hundred thirty-five consecutive patients with acromioclavicular joint separations were admitted to the authors' institution. Fifty patients were included in the study. According to Rockwood classification, 29 (58%) dislocations were type IV and 21 (42%) were type V. Surgery was performed at an average of 4.2 days (range, 0-12 days) after dislocation. All dislocations were treated with the flipptack fixation button technique. All patients were evaluated at a final postoperative follow-up of 42 months (range, 36-49 months). The clinical outcome was assessed using the Constant score. The functional limitation was assessed using the bother index of the short Musculoskeletal Function Assessment. Radiographs taken immediately postoperatively and at the final follow-up assessed acromioclavicular joint reduction, coracoclavicular distance, and joint arthrosis. At the final follow-up, mean Constant score was 93.04 (range, 84-100). The average (±SD) short Musculoskeletal Function Assessment bother index was 20.88±8.95 (range, 2.0-49). No statistically significant difference was found between the acromioclavicular joint dislocation type and the clinical result (P=.227; chi-square, 6.910, Kruskal Wallis test). The regression of the coracoclavicular distance at final follow-up was not statistically significant (P=.276; chi-square, 6.319, Kruskal Wallis test). The flipptack fixation button technique is an effective alternative for the treatment of severe acromioclavicular joint dislocation. Because all objectives of the treatment were obtained, the results do not deteriorate over time. Copyright 2015, SLACK Incorporated.
Illinois method for the design of dense-graded emulsion base mixes : final report.
DOT National Transportation Integrated Search
1981-01-01
This study evaluated the practicality of using a basic test method developed at the University of Illinois. The report describes the use of the Illinois equation for predicting trial asphalt content, compares the results obtained with two CSS emulsio...
Oregon regional intelligent transportation systems (ITS) integration program. Final phase II report
DOT National Transportation Integrated Search
2002-07-12
The purpose of the Transit Tracker evaluation is to collect and analyze data related to a change in bus riders behaviors and perceptions of service and security as a result of the Transit Tracker information displays. Four measures of effectivenes...
DOT National Transportation Integrated Search
1999-03-01
The Mobile Surveillance and Wireless Communication Systems Field Operational Test (FOT) evaluated the performance of wireless traffic detection and communications systems in areas where permanent detectors, electrical power, and landline communicatio...
Traffic flow evaluation of pavement inset lights for use during fog : Final report.
DOT National Transportation Integrated Search
1977-01-01
Reduced visibility resulting from fog presents a very hazardous condition on the highway because of the inability of motorists to readily observe pavement markings and signs and the movement of traffic. Afton Mountain, which is traversed by I-64, oft...
Development of active traffic management strategies for Minnesota freeway corridors : final report.
DOT National Transportation Integrated Search
2015-06-01
In this study, the effectiveness of the I-35W variable advisory speed limit system on the improvement of the traffic : flow was evaluated with the real traffic data. The analysis results indicate there was significant reduction in the : average maxim...
Human Factors Assessment: The Passive Final Approach Spacing Tool (pFAST) Operational Evaluation
NASA Technical Reports Server (NTRS)
Lee, Katharine K.; Sanford, Beverly D.
1998-01-01
Automation to assist air traffic controllers in the current terminal and en route air traff ic environments is being developed at Ames Research Center in conjunction with the Federal Aviation Administration. This automation, known collectively as the Center-TRACON Automation System (CTAS), provides decision- making assistance to air traffic controllers through computer-generated advisories. One of the CTAS tools developed specifically to assist terminal area air traffic controllers is the Passive Final Approach Spacing Tool (pFAST). An operational evaluation of PFAST was conducted at the Dallas/Ft. Worth, Texas, Terminal Radar Approach Control (TRACON) facility. Human factors data collected during the test describe the impact of the automation upon the air traffic controller in terms of perceived workload and acceptance. Results showed that controller self-reported workload was not significantly increased or reduced by the PFAST automation; rather, controllers reported that the levels of workload remained primarily the same. Controller coordination and communication data were analyzed, and significant differences in the nature of controller coordination were found. Controller acceptance ratings indicated that PFAST was acceptable. This report describes the human factors data and results from the 1996 Operational Field Evaluation of Passive FAST.
Roelofs, Jeffrey; Muris, Peter; Braet, Caroline; Arntz, Arnoud; Beelen, Imke
2015-06-01
The Structured Clinical Interview for DSM-IV Childhood Disorders (Kid-SCID) is a semi-structured interview for the classification of psychiatric disorders in children and adolescents. This study presents a first evaluation of the psychometric properties of the Kid-SCID in a Dutch sample of children and adolescents who had been referred to an outpatient treatment centre for mental health problems. Results indicated that the inter-rater reliability of the Kid-SCID classifications and the internal consistency of various (dimensional) criteria of the diagnoses were moderate to good. Further, for most Kid-SCID diagnoses, reasonable agreement between children and parents was found. Finally, the correspondence between the Kid-SCID and the final clinical diagnosis as established after the full intake procedure, which included the information as provided by the Kid-SCID, ranged from poor to good. Results are discussed in the light of methodological issues pertaining to the assessment of psychiatric disorders in youths. The Kid-SCID can generally be seen as a reliable and useful tool that can assist clinicians in carrying out clinical evaluations of children and adolescents.
Genesis field operational test : final evaluation report
DOT National Transportation Integrated Search
1997-09-01
This document is the Final Evaluation Report for the Genesis Advanced Traveler Information System (ATIS) Field Operational Test (FOT). Genesis was one of the early projects sponsored by the US Department of Transportation (USDOT) Intelligent Transpor...
iFlorida model deployment final evaluation report.
DOT National Transportation Integrated Search
2009-01-01
This document is the final report for the evaluation of the USDOT-sponsored Surface Transportation Security and Reliability Information System Model Deployment, or iFlorida Model Deployment. This report discusses findings in the following areas: ITS ...
iFlorida model deployment final evaluation report
DOT National Transportation Integrated Search
2009-01-01
This document is the final report for the evaluation of the USDOT-sponsored Surface Transportation Security and Reliability Information System Model Deployment, or iFlorida Model Deployment. This report discusses findings in the following areas: ITS ...
Development and weighting of a life cycle assessment screening model
NASA Astrophysics Data System (ADS)
Bates, Wayne E.; O'Shaughnessy, James; Johnson, Sharon A.; Sisson, Richard
2004-02-01
Nearly all life cycle assessment tools available today are high priced, comprehensive and quantitative models requiring a significant amount of data collection and data input. In addition, most of the available software packages require a great deal of training time to learn how to operate the model software. Even after this time investment, results are not guaranteed because of the number of estimations and assumptions often necessary to run the model. As a result, product development, design teams and environmental specialists need a simplified tool that will allow for the qualitative evaluation and "screening" of various design options. This paper presents the development and design of a generic, qualitative life cycle screening model and demonstrates its applicability and ease of use. The model uses qualitative environmental, health and safety factors, based on site or product-specific issues, to sensitize the overall results for a given set of conditions. The paper also evaluates the impact of different population input ranking values on model output. The final analysis is based on site or product-specific variables. The user can then evaluate various design changes and the apparent impact or improvement on the environment, health and safety, compliance cost and overall corporate liability. Major input parameters can be varied, and factors such as materials use, pollution prevention, waste minimization, worker safety, product life, environmental impacts, return of investment, and recycle are evaluated. The flexibility of the model format will be discussed in order to demonstrate the applicability and usefulness within nearly any industry sector. Finally, an example using audience input value scores will be compared to other population input results.
An Examination of Final Evaluation Methods Used in Master's Level Counseling Programs.
ERIC Educational Resources Information Center
Carney, Jamie S.; Cobia, Debra C.; Shannon, David M.
1998-01-01
Reports the findings of a national study examining methods used for final evaluation in master's level counseling programs. Suggests that as faculty review their policies and procedures with regard to student evaluation, these data may provide valuable information concerning methods selection, content, and delivery of feedback to students.…
State Compensatory Education. Final Technical Report 1975-76. Appendixes.
ERIC Educational Resources Information Center
Austin Independent School District, TX. Office of Research and Evaluation.
This material consists of ten appendixes to the Final Report for 1976-77 on the implementation of the Texas state-supported compensatory education program in the Austin Independent School District as evaluated by that district's Office of Research and Evaluation. The instruments used in the evaluation process are described or presented in full,…
76 FR 74076 - Notice of Random Assignment Study To Evaluate the YouthBuild Program; Final Notice
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-30
... Evaluate the YouthBuild Program; Final Notice AGENCY: Employment and Training Administration (ETA), Labor... rigorous, nationally-representative estimates of the net impacts of the YouthBuild program. The Department... study. In the sites randomly selected to participate in this evaluation, all applicants for YouthBuild...
ERIC Educational Resources Information Center
Pinelli, Thomas E.; And Others
As Phase I of a comprehensive evaluation of the NASA-affiliated Langley Research Center's (LaRC) scientific and technical information (STI) program, an internal survey was conducted to obtain feedback from LaRC scientists and engineers concerning the effectiveness of the STI program. The first stage of the survey, which involved interviews with 64…
ERIC Educational Resources Information Center
Pinelli, Thomas E.; And Others
As Phase IV of a comprehensive evaluation of the NASA-affiliated Langley Research Center's (LaRC) scientific and technical information (STI) program, a study was conducted to assess the usage, importance, and perceived quality of Langley-generated STI among academic and industrial research personnel, and to determine ways in which that information…
Evaluation de quatre milieux d'enrichissement pour la mise en évidence des salmonelles aviaires
Malo, René; Cousineau, J. Guy
1970-01-01
During the course of one natural and two experimental infections with Salmonella the authors evaluated four different enrichment media for the isolation and growth of these organisms. The final results indicate that the utilisation of only one medium is not sufficient. They suggest the addition of M.M. medium to the Sodium Tetrathionate and Selenite broth. The M.S. medium proved to be too inhibiting. PMID:4245787
Wind Plant Performance Prediction (WP3) Project
DOE Office of Scientific and Technical Information (OSTI.GOV)
Craig, Anna
The methods for analysis of operational wind plant data are highly variable across the wind industry, leading to high uncertainties in the validation and bias-correction of preconstruction energy estimation methods. Lack of credibility in the preconstruction energy estimates leads to significant impacts on project financing and therefore the final levelized cost of energy for the plant. In this work, the variation in the evaluation of a wind plant's operational energy production as a result of variations in the processing methods applied to the operational data is examined. Preliminary results indicate that selection of the filters applied to the data andmore » the filter parameters can have significant impacts in the final computed assessment metrics.« less
Census data quality--a user's view.
Hawkes, W J
1986-01-01
"This paper presents the perspective of a major user of both decennial and economic [U.S.] census data. It illustrates how these data are used as a framework for commercial marketing research surveys that measure television audiences and sales of consumer goods through retail stores, drawing on Nielsen's own experience in data collection and evaluation. It reviews Nielsen's analyses of census data quality based, in part, on actual field evaluation of census results. Finally, it suggests ways that data quality might be evaluated and improved to enhance the usefulness of these census programs." excerpt
ERIC Educational Resources Information Center
Jaen, Maria Moreno; Basanta, Carmen Perez
2010-01-01
The educational experience related over the following pages is the result of several research projects undertaken after an evaluation of the vocabulary size of final year English philology students at the University of Granada (Spain), who were found to have a significant deficiency in their lexical competence. In view of the results obtained,…
Design and characterization of microstrip based E-field sensor for GSM and UMTS frequency bands
NASA Astrophysics Data System (ADS)
Narang, N.; Dubey, S. K.; Negi, P. S.; Ojha, V. N.
2016-12-01
An Electric (E-) field sensor based on coplanar waveguide-fed microstrip antenna to measure E-field strength for dual-band operation at 914 MHz and 2.1 GHz is proposed, designed, and characterized. The parametric optimization of the design has been performed to obtain resonance at global system for mobile communication and universal mobile telecommunication system frequency band. Low return loss (-17 dB and -19 dB), appropriate gain (0.50 dB and 1.55 dB), and isotropic behaviour (directivity ˜ 1 dB), respectively, at 914 MHz and 2.1 GHz, are obtained for probing application. Antenna factor (AF) is used as an important parameter to characterize the performance of the E-field sensor. The AF measurement is explained in detail and results are reported. Finally, using the designed E-field sensor, the E-field strength measurements are carried out in a transverse electromagnetic cell. The key sources of uncertainties in the measurement are identified, evaluated, and incorporated into the final results. The measurement results are compared with theoretical values, which are found in good agreement. For comparative validation, the results are evaluated with reference to an already calibrated commercially available isotropic probe.
Design and characterization of microstrip based E-field sensor for GSM and UMTS frequency bands.
Narang, N; Dubey, S K; Negi, P S; Ojha, V N
2016-12-01
An Electric (E-) field sensor based on coplanar waveguide-fed microstrip antenna to measure E-field strength for dual-band operation at 914 MHz and 2.1 GHz is proposed, designed, and characterized. The parametric optimization of the design has been performed to obtain resonance at global system for mobile communication and universal mobile telecommunication system frequency band. Low return loss (-17 dB and -19 dB), appropriate gain (0.50 dB and 1.55 dB), and isotropic behaviour (directivity ∼ 1 dB), respectively, at 914 MHz and 2.1 GHz, are obtained for probing application. Antenna factor (AF) is used as an important parameter to characterize the performance of the E-field sensor. The AF measurement is explained in detail and results are reported. Finally, using the designed E-field sensor, the E-field strength measurements are carried out in a transverse electromagnetic cell. The key sources of uncertainties in the measurement are identified, evaluated, and incorporated into the final results. The measurement results are compared with theoretical values, which are found in good agreement. For comparative validation, the results are evaluated with reference to an already calibrated commercially available isotropic probe.
Brinkman, D J; Tichelaar, J; Schutte, T; Benemei, S; Böttiger, Y; Chamontin, B; Christiaens, T; Likic, R; Maˇiulaitis, R; Marandi, T; Monteiro, E C; Papaioannidou, P; Pers, Y M; Pontes, C; Raskovic, A; Regenthal, R; Sanz, E J; Tamba, B I; Wilson, K; Vries, Tp de; Richir, M C; Agtmael, Ma van
2017-02-01
European medical students should have acquired adequate prescribing competencies before graduation, but it is not known whether this is the case. In this international multicenter study, we evaluated the essential knowledge, skills, and attitudes in clinical pharmacology and therapeutics (CPT) of final-year medical students across Europe. In a cross-sectional design, 26 medical schools from 17 European countries were asked to administer a standardized assessment and questionnaire to 50 final-year students. Although there were differences between schools, our results show an overall lack of essential prescribing competencies among final-year students in Europe. Students had a poor knowledge of drug interactions and contraindications, and chose inappropriate therapies for common diseases or made prescribing errors. Our results suggest that undergraduate teaching in CPT is inadequate in many European schools, leading to incompetent prescribers and potentially unsafe patient care. A European core curriculum with clear learning outcomes and assessments should be urgently developed. © 2016 The Authors. Clinical Pharmacology & Therapeutics published by Wiley Periodicals, Inc. on behalf of The American Society for Clinical Pharmacology and Therapeutics.
Space suit glove design with advanced metacarpal phalangeal joints and robotic hand evaluation.
Southern, Theodore; Roberts, Dustyn P; Moiseev, Nikolay; Ross, Amy; Kim, Joo H
2013-06-01
One area of space suits that is ripe for innovation is the glove. Existing models allow for some fine motor control, but the power grip--the act of grasping a bar--is cumbersome due to high torque requirements at the knuckle or metacarpal phalangeal joint (MCP). This area in particular is also a major source of complaints of pain and injury as reported by astronauts. This paper explores a novel fabrication and patterning technique that allows for more freedom of movement and less pain at this crucial joint in the manned space suit glove. The improvements are evaluated through unmanned testing, manned testing while depressurized in a vacuum glove box, and pressurized testing with a robotic hand. MCP joint flex score improved from 6 to 6.75 (out of 10) in the final glove relative to the baseline glove, and torque required for flexion decreased an average of 17% across all fingers. Qualitative assessments during unpressurized and depressurized manned testing also indicated the final glove was more comfortable than the baseline glove. The quantitative results from both human subject questionnaires and robotic torque evaluation suggest that the final iteration of the glove design enables flexion at the MCP joint with less torque and more comfort than the baseline glove.
Effect of air abrasion and polishing on primary molar fissures.
Lenzi, T L; Menezes, L B R; Soares, F Z M; Rocha, R O
2013-04-01
To evaluate the effect of air abrasion and polishing on primary molar fissures under light microscopy. 15 exfoliated primary second molars were longitudinally sectioned and photographed under a stereomicroscope (40×; baseline evaluation). Sections were then randomly allocated into one of the two groups (n = 15) and treated by either air abrasion (aluminium oxide jet) or air polishing (sodium bicarbonate jet) for 30 s. After treatment, sections were washed with an air/water spray, dried with absorbent paper, and photographed as previously described (final evaluation). Baseline and final morphology were compared by two blinded examiners who evaluated changes in the width and depth of fissures. The percentage of changed fissures was analysed, and the two treatments were compared using the Mann-Whitney test (α = 0.01). Both air systems resulted in fissure changes in most (93.3 %) of the sections. No significant differences in fissure width changes were found between treatments, but when changes in fissure depth were evaluated, air polishing was found to be less damaging than air abrasion (p < 0.01). Air abrasion and polishing cause changes to the anatomical configuration of occlusal fissures of primary molars.
Development and validation of a remote home safety protocol.
Romero, Sergio; Lee, Mi Jung; Simic, Ivana; Levy, Charles; Sanford, Jon
2018-02-01
Environmental assessments and subsequent modifications conducted by healthcare professionals can enhance home safety and promote independent living. However, travel time, expense and the availability of qualified professionals can limit the broad application of this intervention. Remote technology has the potential to increase access to home safety evaluations. This study describes the development and validation of a remote home safety protocol that can be used by a caregiver of an elderly person to video-record their home environment for later viewing and evaluation by a trained professional. The protocol was developed based on literature reviews and evaluations from clinical and content experts. Cognitive interviews were conducted with a group of six caregivers to validate the protocol. The final protocol included step-by-step directions to record indoor and outdoor areas of the home. The validation process resulted in modifications related to safety, clarity of the protocol, readability, visual appearance, technical descriptions and usability. Our final protocol includes detailed instructions that a caregiver should be able to follow to record a home environment for subsequent evaluation by a home safety professional. Implications for Rehabilitation The results of this study have several implications for rehabilitation practice The remote home safety evaluation protocol can potentially improve access to rehabilitation services for clients in remote areas and prevent unnecessary delays for needed care. Using our protocol, a patient's caregiver can partner with therapists to quickly and efficiently evaluate a patient's home before they are released from the hospital. Caregiver narration, which reflects a caregiver's own perspective, is critical to evaluating home safety. In-home safety evaluations, currently not available to all who need them due to access barriers, can enhance a patient's independence and provide a safer home environment.
EVALUATION OF THE POTENTIAL CARCINOGENICITY OF ELECTROMAGNETIC FIELDS (EXTERNAL REVIEW DRAFT)
The U.S. Environmental Protection Agency (EPA or Agency) is posting on this web site a draft document related to the potential adverse human health effects resulting from exposure to electromagnetic fields (EMF). This document was never finalized after EPA activities were discon...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Potchen, E.J.; Harris, G.I.; Gift, D.A. Reinhard, D.K.
Results are reported of the final phase of the study effort generally titled Evaluative Studies in Nuclear Medicine Research. The previous work is reviewed and extended to an assessment providing perspectives on medical applications of positron emission tomographic (PET) systems, their technological context, and the related economic and marketing environment. Methodologies developed and used in earlier phases of the study were continued, but specifically extended to include solicitation of opinion from commercial organizations deemed to be potential developers, manufacturers and marketers of PET systems. Several factors which influence the demand for clinical uses of PET are evaluated and discussed. Themore » recent Federal funding of applied research with PET systems is found to be a necessary and encouraging event toward a determination that PET either is a powerful research tool limited to research, or whether it also presents major clinical utility. A comprehensive, updated bibliography of current literature related to the development, applications and economic considerations of PET technology is appended.« less
Evaluation of alternative comonomers for the production of ASE and HASE thickeners.
Moraes, Raul P; Graillat, Christian; Jeanson, Guillaume; Haw, Sarah; Favero, Cédrick; McKenna, Timothy F L
2010-12-01
Methyl methacrylate (MMA), n-butyl acrylate (BA) and 2-ethyl hexyl acrylate (EHA) were evaluated as alternatives to ethyl acrylate (EA) in the composition of methacrylic acid (MAA)-EA copolymers for the production of hydrophobically-modified alkali soluble emulsions (HASE). In addition, the impact of Sipomer BEM and PLEX 6954-0 as associative monomers (AM) on the properties of the final HASE products was evaluated. EHA gave reasonable results as a replacement comonomer for alkali soluble emulsion (ASE) synthesis and applications. However, it was not possible to obtain transparent thickened solutions without provoking significant flocculation losses during the synthesis of HASE products that incorporated EHA. MAA-BA and MAA-MMA formulations produced ASE and HASE copolymers with 0.5mol.% AM, which presented high transparency and viscosity levels. When comparing the two AM, it was found that the longer the hydrophobic tail, the higher the apparent viscosity, but the lower the transparency of the final product. Copyright © 2010 Elsevier Inc. All rights reserved.
Gaddala, Naresh; Veeramachineni, Chandrasekhar
2015-01-01
Background Smear layer which was formed during the instrumentation of root canals hinders the penetration of root canal sealers to root dentin and affect the bond strength of root canal sealers to root dentin. Final irrigant such as demineralizing agents are used to remove the inorganic portion of the smear layer. In the present study, peracetic acid used as a final rinse, to effect the bond strength of root canal sealers to root dentin. Aim The purpose of the present study was to evaluate the efficacy of peracetic acid as a final irrigant on bond strength of root canal sealers to root dentin. Materials and Methods Sixty six freshly extracted human single rooted mandibular premolars were used for this study. After decoronation the samples were instrumented with Protaper upto F3 and irrigated with 5.25% NaOcl. The teeth were then divided into three groups based on final irrigant used: Group-1(control group) Canals were irrigated with distilled water. Group-2: Canals were irrigated with peracetic acid. Group-3: Canals were irrigated with smear clear. Each group was further divided into three subgroups (n=30) based on the sealer used to obturate the canals. Subgroup-1: kerr, Subgroup-2: Apexit plus, Subgroup-3: AH PLUS. Each sealer was mixed and coated to master cone and placed in the canal. The bonding between sealer and dentin surface was evaluated using push out bond strength by universal testing machine. The mean bond strength values of each group were statistically evaluated using Two-way ANOVA followed by Tukey post-hoc test. Results Significant difference was found among the bond strength of the sealers. But, there is no statistically significant difference between the groups irrigated with peracetic acid and smear clear compared to control group. AH Plus showed highest bond strength irrespective of the final irrigant used. Conclusion Peracetic acid when employed as final irrigant improved the bond strength of root canal sealers compared to control group but not statistically significant than smear clear. PMID:26155568
2016-05-01
UNCLASSIFIED LIGHT AND HEAVY TACTICAL WHEELED VEHICLE FUEL CONSUMPTION EVALUATIONS USING FUEL EFFICIENT GEAR OILS (FEGO) FINAL... HEAVY TACTICAL WHEELED VEHICLE FUEL CONSUMPTION EVALUATIONS USING FUEL EFFICIENT GEAR OILS (FEGO) FINAL REPORT TFLRF No. 477 by Adam C...August 2014 – March 2016 4. TITLE AND SUBTITLE LIGHT AND HEAVY TACTICAL WHEELED VEHICLE FUEL CONSUMPTION EVALUATIONS USING FEUL EFFICIENT GEAR OILS
NASA Astrophysics Data System (ADS)
Zhang, J.; Lin, L. F.; Bras, R. L.
2017-12-01
Hydrological applications rely on the availability and quality of precipitation products, specially model- and satellite-based products for use in areas without ground measurements. It is known that the quality of model- and satellite-based precipitation products are complementary—model-based products exhibiting high quality during winters while satellite-based products seem to be better during summers. To explore that behavior, this study uses 2-m air temperature as auxiliary information to evaluate high-resolution (0.1°×0.1° every hour) precipitation products from Weather Research and Forecasting (WRF) simulations and from version-4 Integrated Multi-satellite Retrievals for GPM (IMERG) early and final runs. The products are evaluated relative to the reference NCEP Stage IV precipitation estimates over the central United States in 2016. The results show that the WRF and IMERG final-run estimates are nearly unbiased while the IMERG early-run estimates positively biased. The results also show that the WRF estimates exhibit high correlations with the reference data when the temperature falls below 280°K and the IMERG estimates (i.e., both early and final runs) do so when the temperature exceeds 280°K. Moreover, the temperature threshold of 280°K, which distinguishes the quality of the WRF and the IMERG products, does not vary significantly with either season or location. This study not only adds insight into current precipitation research on the quality of precipitation products but also suggests a simple way for choosing either a model- or satellite-based product or a hybrid model/satellite product for applications.
Indication and method of frozen section in vaginal radical trachelectomy.
Chênevert, Jacinthe; Têtu, Bernard; Plante, Marie; Roy, Michel; Renaud, Marie-Claude; Grégoire, Jean; Grondin, Katherine; Dubé, Valérie
2009-09-01
Vaginal radical trachelectomy (VRT) is a fertility-sparing surgical technique used as an alternative to radical hysterectomy in early stage cervical carcinoma. With the advent of VRT, preoperative evaluation of the surgical margin has become imperative, because if the tumor is found within 5 mm of the endocervical margin, additional surgical resection is required. In a study published earlier from our center, we came to the conclusion that a frozen section should be conducted only when a cancerous lesion is grossly visible, and that it could be omitted in normal-looking specimens or VRT with nonspecific lesions. Since then, 53 VRT have been performed in our center, and frozen sections were conducted according to these recommendations. Fifteen VRT were grossly normal, 24 had a nonspecific lesion and 14 showed a grossly visible lesion. Final margins were satisfactory on all 15 grossly normal specimens. Of the 24 VRT with nonspecific lesions, 2 cases for which no frozen section was performed had unsatisfactory final margins (<5 mm). Of the 14 VRT with grossly visible lesions, 3 cases were inadequately evaluated by frozen section due to sampling errors, which led to unsatisfactory final margin assessment. These results confirm that a frozen section can be omitted on normal looking VRT specimens, but contrary to results published earlier, we recommend that a frozen section be performed on all VRT with nonspecific lesions. As for VRT with a grossly visible lesion, frozen section evaluation is still warranted, and we recommend increasing the sampling to improve the adequacy of frozen sections.
Goldsboro-Wayne County E.S.E.A. Title III. Final Evaluation Report, 1974-1975.
ERIC Educational Resources Information Center
Educational Planning and Evaluation Consultants, Inc., Chapel Hill, NC.
Contained in the final report is evaluation information for the Goldsboro-Wayne County (North Carolina) Elementary and Secondary Education Act Title III Project for 35 moderately, severely, and profoundly retarded children (3-16 years old) during the 1974-75 school year. The project was evaluated through analysis of behavior change data and…
[Teaching Bioethics to Students of Medicine with Problem-Based Learning (PBL)].
Bosch-Barrera, Joaquim; Briceño García, Hugo C; Capella, Dolors; De Castro Vila, Carmen; Farrés, Ramón; Quintanas, Anna; Ramis, Josep; Roca, Rosa; Brunet, Joan
2015-01-01
We present the experience of the introduction of the subject of bioethics in a medical school in order to give to the 73 students of 5th degree skills to handle ethical conflicts in their practice. The main teaching method used was problem-based learning (PBL). Skills objectives are described. The course was structured with a theoretical seminar (2 hours of duration), a workshop (2 hours of duration), 4 cases of PBL (24 hours of duration in total) and a role playing workshop (2 hours of duration). The seminar was aimed at the acquisition of theoretical knowledge. The PBL cases provided critical appraisal, obtaining knowledge, and application. The Role Playing set out for the practical demonstration of skills acquired in a simulated environment. A continuous assessment of students was performed throughout their practice on the PBL cases (40% of the final score) and also a final evaluation of the course was carried out via exam (60% of the final score). Students completed a course and faculty evaluation anonymously, which came out with positive results (median score of 8.5/10).
Maciel, Felipe Jucá; Jucá, José Fernando Thomé
2011-05-01
Landfill gas (LFG) emissions from municipal solid waste (MSW) landfills are an important environmental concern in Brazil due to the existence of several uncontrolled disposal sites. A program of laboratory and field tests was conducted to investigate gas generation in and emission from an Experimental Cell with a 36,659-ton capacity in Recife/PE - Brazil. This investigation involved waste characterisation, gas production and emission monitoring, and geotechnical and biological evaluations and was performed using three types of final cover layers. The results obtained in this study showed that waste decomposes 4-5 times faster in a tropical wet climate than predicted by traditional first-order models using default parameters. This fact must be included when considering the techniques and economics of projects developed in tropical climate countries. The design of the final cover layer and its geotechnical and biological behaviour proved to have an important role in minimising gas emissions to the atmosphere. Capillary and methanotrophic final cover layers presented lower CH(4) flux rates than the conventional layer. Copyright © 2011 Elsevier Ltd. All rights reserved.
Pediatric emergency department census during major sporting events.
Kim, Tommy Y; Barcega, Besh B; Denmark, T Kent
2012-11-01
Our study attempted to evaluate the effects of major sporting events on the census of a pediatric emergency department (ED) in the United States specifically related to the National Football League Super Bowl, National Basketball Association (NBA) Finals, and Major League Baseball World Series. We performed a retrospective data analysis of our pediatric ED census on the number of visits during major sporting events over a 5-year period. Data during the same period 1 week after the major sporting event were collected for comparison as the control. We evaluated the medians of 2-hour increments around the event start time. Subgroup analysis was performed for games involving the local sporting teams. Our results showed no significant difference in ED census during the sporting events, except in the post 6 to 8 hours of the NBA finals. Subgroup analysis of the Los Angeles Lakers showed the same significant findings in the post 6 to 8 hours of the NBA finals. No major difference in pediatric ED census is observed during the most major sporting events in the United States.
Detection and Evaluation of Pre-Preg Gaps and Overlaps in Glare Laminates
NASA Astrophysics Data System (ADS)
Nardi, Davide; Abouhamzeh, Morteza; Leonard, Rob; Sinke, Jos
2018-03-01
Gaps and overlaps between pre-preg plies represent common flaws in composite materials that can be introduced easily in an automated fibre placement manufacturing process and are potentially detrimental for the mechanical performances of the final laminates. Whereas gaps and overlaps have been addressed for full composite material, the topic has not been extended to a hybrid composite material such as Glare, a member of the family of Fibre Metal Laminates (FMLs). In this paper/research, the manufacturing, the detection, and the optical evaluation of intraply gaps and overlaps in Glare laminates are investigated. As part of an initial assessment study on the effect of gaps and overlaps on Glare, only the most critical lay-up has been considered. The experimental investigation started with the manufacturing of specimens having gaps and overlaps with different widths, followed by a non-destructive ultrasonic-inspection. An optical evaluation of the gaps and overlaps was performed by means of microscope image analysis of the cross sections of the specimens. The results from the non-destructive evaluations show the effectiveness of the ultrasonic detection of gaps and overlaps both in position, shape, width, and severity. The optical inspections confirm the accuracy of the non-destructive evaluation also adding useful insights about the geometrical features due to the presence of gaps and overlaps in the final Glare laminates. All the results justify the need for a further investigation on the effect of gaps and overlaps on the mechanical properties.
Biosynthesis of Silver Nanoparticles Using Extracts of Mexican Medicinal Plants
NASA Astrophysics Data System (ADS)
López, J. L.; Baltazar, C.; Torres, M.; Ruız, A.; Esparza, R.; Rosas, G.
The biosynthesis of silver nanoparticles using an aqueous extract of Agastache mexicana and Tecoma stans was carried out. The AgNO3 concentration and extract concentration was varied to evaluate their influence on the nanoparticles characteristics such as size and shape. Several characterization techniques were employed. UV-Vis spectroscopy revealed the surface plasmon resonance in the range of 400-500 nm. The X-Ray diffraction results showed that the nanoparticles have a face-centered cubic structure. SEM results confirmed the formation of silver nanoparticles with spherical morphologies. Finally, the antibacterial activity of silver nanoparticles was evaluated against Escherichia coli bacteria.
The evaluation of a number of prototypes for the free-tip rotor constant-moment controller
NASA Technical Reports Server (NTRS)
Young, L. A.
1986-01-01
The development of several prototypes of a constant moment controller, a critical component of the free-tip rotor (FTR) concept, is described. Also presented are the experimental results of a whirl test designed to select a final controller configuration to be included in a future wind-tunnel test of this innovative rotor system. A brief explanation of the FTR concept and its history are included. The paper documents the controller design constraints, each prototype's operating principle, the evaluation test, and the individual prototype test results. A recommended design is identified, along with the selection rationale.
Probabilistic Multi-Factor Interaction Model for Complex Material Behavior
NASA Technical Reports Server (NTRS)
Abumeri, Galib H.; Chamis, Christos C.
2010-01-01
Complex material behavior is represented by a single equation of product form to account for interaction among the various factors. The factors are selected by the physics of the problem and the environment that the model is to represent. For example, different factors will be required for each to represent temperature, moisture, erosion, corrosion, etc. It is important that the equation represent the physics of the behavior in its entirety accurately. The Multi-Factor Interaction Model (MFIM) is used to evaluate the divot weight (foam weight ejected) from the external launch tanks. The multi-factor has sufficient degrees of freedom to evaluate a large number of factors that may contribute to the divot ejection. It also accommodates all interactions by its product form. Each factor has an exponent that satisfies only two points - the initial and final points. The exponent describes a monotonic path from the initial condition to the final. The exponent values are selected so that the described path makes sense in the absence of experimental data. In the present investigation, the data used were obtained by testing simulated specimens in launching conditions. Results show that the MFIM is an effective method of describing the divot weight ejected under the conditions investigated. The problem lies in how to represent the divot weight with a single equation. A unique solution to this problem is a multi-factor equation of product form. Each factor is of the following form (1 xi/xf)ei, where xi is the initial value, usually at ambient conditions, xf the final value, and ei the exponent that makes the curve represented unimodal that meets the initial and final values. The exponents are either evaluated by test data or by technical judgment. A minor disadvantage may be the selection of exponents in the absence of any empirical data. This form has been used successfully in describing the foam ejected in simulated space environmental conditions. Seven factors were required to represent the ejected foam. The exponents were evaluated by least squares method from experimental data. The equation is used and it can represent multiple factors in other problems as well; for example, evaluation of fatigue life, creep life, fracture toughness, and structural fracture, as well as optimization functions. The software is rather simplistic. Required inputs are initial value, final value, and an exponent for each factor. The number of factors is open-ended. The value is updated as each factor is evaluated. If a factor goes to zero, the previous value is used in the evaluation.
Intraoperative ultrasound control of surgical margins during partial nephrectomy.
Alharbi, Feras M; Chahwan, Charles K; Le Gal, Sophie G; Guleryuz, Kerem M; Tillou, Xavier P; Doerfler, Arnaud P
2016-01-01
To evaluate a simple and fast technique to ensure negative surgical margins on partial nephrectomies, while correlating margin statuses with the final pathology report. This study was conducted for patients undergoing partial nephrectomy (PN) with T1-T2 renal tumors from January 2010 to the end of December 2015. Before tumor removal, intraoperative ultrasound (US) localization was performed. After tumor removal and before performing hemostasis of the kidney, the specimens were placed in a saline solution and a US was performed to evaluate if the tumor's capsule were intact, and then compared to the final pathology results. In 177 PN(s) (147 open procedures and 30 laparoscopic procedures) were performed on 147 patients. Arterial clamping was done for 32 patients and the mean warm ischemia time was 19 ± 6 min. The mean US examination time was 41 ± 7 s. The US analysis of surgical margins was negative in 172 cases, positive in four, and in only one case it was not possible to conclude. The final pathology results revealed one false positive surgical margin and one false negative surgical margin, while all other margins were in concert with US results. The mean tumor size was 3.53 ± 1.43 cm, and the mean surgical margin was 2.8 ± 1.5 mm. The intraoperative US control of resection margins in PN is a simple, efficient, and effective method for ensuring negative surgical margins with a small increase in warm ischemia time and can be conducted by the operating urologist.
Otsuka, Tomoko; Kuroiwa, Yosuke; Sato, Kazunari; Yamashita, Kazunari; Hakomori, Tadashi; Kimura, Shin-Ichiro; Iwao, Yasunori; Itai, Shigeru
2018-01-01
The properties of wet mass, which indicate the progress of high shear granulation processes, usually have an effect on final product properties, such as tablet dissolution. The mixer torque rheometer (MTR) is a useful tool for quantitatively measuring the 'kneading state' of wet mass and detecting differences in granules. However, there have been no studies of the relationship between the MTR torque and the final product properties to date. In this study, we measured the MTR torque of wet granules at different kneading states, which were prepared by changing the granulation conditions. We then evaluated the relationship between the MTR torque and the dissolution rate of the final product properties. The amperage of the high shear granulator is usually monitored during granulation, but we could not detect a difference in the kneading state through the amperage. However, using MTR torque we were able to quantify the difference of the wet mass. Moreover, MTR torque showed a high correlation with dissolution, compared with the correlations with other intermediate properties, such as granules particle size and tablet hardness. These other properties are affected by following processes and are not properties that directly relate to the kneading state. Thus, MTR torque is a property of wet mass after granulation, and it can be used to directly evaluate differences of the kneading state, and as a result, dissolution. These results indicate the importance of controlling the kneading state, i.e., the progress of granulation, and the utility of MTR for detecting differences in wet mass.
Erten-Unal, M; Gelderloos, A B; Hughes, J S
1998-07-30
A Toxicity Reduction Evaluation (TRE) was conducted on the oily wastewater treatment plant (Plant) at a Naval Fuel Depot. The Plant treats ship and ballast wastes, berm water from fuel storage areas and wastes generated in the fuel reclamation plant utilizing physical/chemical treatment processes. In the first period of the project (Period I), the TRE included chemical characterization of the plant wastewaters, monitoring the final effluent for acute toxicity and a thorough evaluation of each treatment process and Plant operating procedures. Toxicity Identification Evaluation (TIE) procedures were performed as part of the overall TRE to characterize and identify possible sources of toxicity. Several difficulties were encountered because the effluent was saline, test organisms were marine species and toxicity was sporadic and unpredictable. The treatability approach utilizing enhancements, improved housekeeping, and operational changes produced substantial reductions in the acute toxicity of the final effluent. In the second period (Period II), additional acute toxicity testing and chemical characterization were performed through the Plant to assess the long-term effects of major unit process improvements for the removal of toxicity. The TIE procedures were also modified for saline wastewaters to focus on suspected class of toxicants such as surfactants. The TRE was successful in reducing acute toxicity of the final effluent through process improvements and operational modifications. The results indicated that the cause of toxicity was most likely due to combination of pollutants (matrix effect) rather than a single pollutant.
NASA Technical Reports Server (NTRS)
Chamis, Christos C.; Abumeri, Galib H.
2010-01-01
The Multi-Factor Interaction Model (MFIM) is used to evaluate the divot weight (foam weight ejected) from the launch external tanks. The multi-factor has sufficient degrees of freedom to evaluate a large number of factors that may contribute to the divot ejection. It also accommodates all interactions by its product form. Each factor has an exponent that satisfies only two points--the initial and final points. The exponent describes a monotonic path from the initial condition to the final. The exponent values are selected so that the described path makes sense in the absence of experimental data. In the present investigation, the data used was obtained by testing simulated specimens in launching conditions. Results show that the MFIM is an effective method of describing the divot weight ejected under the conditions investigated.
Space Station communications and tracking systems modeling and RF link simulation
NASA Technical Reports Server (NTRS)
Tsang, Chit-Sang; Chie, Chak M.; Lindsey, William C.
1986-01-01
In this final report, the effort spent on Space Station Communications and Tracking System Modeling and RF Link Simulation is described in detail. The effort is mainly divided into three parts: frequency division multiple access (FDMA) system simulation modeling and software implementation; a study on design and evaluation of a functional computerized RF link simulation/analysis system for Space Station; and a study on design and evaluation of simulation system architecture. This report documents the results of these studies. In addition, a separate User's Manual on Space Communications Simulation System (SCSS) (Version 1) documents the software developed for the Space Station FDMA communications system simulation. The final report, SCSS user's manual, and the software located in the NASA JSC system analysis division's VAX 750 computer together serve as the deliverables from LinCom for this project effort.
Trichobezoar in Vagina: Assessment for Child Sexual Abuse and Diagnostic Result of Forensic Science.
Bağ, Özlem; Acar, Buğra Han; Öztürk, Şenol; Alşen, Sevay; Ecevit, Çiğdem
2017-03-01
Vaginal discharge and bleeding in children require a through and thoughtful evaluation to diagnose the underlying problem including infections, sexual abuse, and vaginal foreign bodies. We report a 6-year-old girl presenting with bloody vaginal discharge, carefully evaluated for sexual abuse, and finally diagnosed as a vaginal foreign body after vaginoscopy. A rolling hair ball was extracted from the vagina and was diagnosed as trichobezoar pathologically without any endo-ecto-mesodermal residual tissue. The hair ball was genetically detected and diagnosed to belong herself by containing no foreign structure. Child sexual abuse was ruled out by forensic interview at CAC and report of forensic science that reported genetic structure belonging to the child. Medicolegal assessment helped in final diagnosis to exclude child sexual abuse. © 2016 American Academy of Forensic Sciences.
DOT National Transportation Integrated Search
2005-07-01
This report presents the results of the evaluation of the I-5/Barbur Boulevard Parallel Corridor Traffic Management Demonstration Project, a cooperative project between the Oregon Department of Transportation (ODOT) and the City of Portland to integr...
Advanced Multiple Processor Configuration Study. Final Report.
ERIC Educational Resources Information Center
Clymer, S. J.
This summary of a study on multiple processor configurations includes the objectives, background, approach, and results of research undertaken to provide the Air Force with a generalized model of computer processor combinations for use in the evaluation of proposed flight training simulator computational designs. An analysis of a real-time flight…
DOT National Transportation Integrated Search
2008-03-14
This report contains the results, findings and conclusions generated from the evaluation and field testing of a specific subset of ITS Standards applicable to the center-to-center exchange of advanced traveler information as deployed by the Nebraska ...
Final Report for the Intensified Career Exploration Program.
ERIC Educational Resources Information Center
McCauley, Lynne D.; Rusling, Diane E.
An intensified Career Exploration Program was evaluated through an analysis of the cognitive and affective learning resulting from ninth- and tenth-grade students' participation in the program. Designed to supplement the existing ninth- and tenth-grade components of the Ohio Career Development Program, this three-year program offered additional…
10 CFR 960.3-2-2-5 - Formal site nomination.
Code of Federal Regulations, 2013 CFR
2013-01-01
... Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-2-2-5 Formal site nomination. After the final..., consideration of the available evidence, evaluations, and the resultant findings for the guidelines of subparts...
10 CFR 960.3-2-2-5 - Formal site nomination.
Code of Federal Regulations, 2014 CFR
2014-01-01
... Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-2-2-5 Formal site nomination. After the final..., consideration of the available evidence, evaluations, and the resultant findings for the guidelines of subparts...
10 CFR 960.3-2-2-5 - Formal site nomination.
Code of Federal Regulations, 2011 CFR
2011-01-01
... Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-2-2-5 Formal site nomination. After the final..., consideration of the available evidence, evaluations, and the resultant findings for the guidelines of subparts...
10 CFR 960.3-2-2-5 - Formal site nomination.
Code of Federal Regulations, 2012 CFR
2012-01-01
... Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-2-2-5 Formal site nomination. After the final..., consideration of the available evidence, evaluations, and the resultant findings for the guidelines of subparts...
Summative Evaluation of the Learning Initiatives Program (LIP). Final Report
ERIC Educational Resources Information Center
Human Resources and Skills Development Canada, 2005
2005-01-01
The Learning Initiatives Program (LIP), formerly the Learning Initiatives Fund (LIF), is a contribution program which was established in 1994 to encourage and support initiatives that contribute to the development of a results-oriented, accessible, relevant and accountable learning system in Canada. Through this program, Human Resources and Skills…
DOT National Transportation Integrated Search
2014-01-01
The objective of the study is to improve Oklahoma Department of Transportation (ODOT) chip seal design and performance through introducing new criteria for the selection of cover aggregate and binder. The study evaluates the shape and texture-related...
Evaluation of carbohydrate-cysteamine thiazolidines as pro-drugs for the treatment of cystinosis
USDA-ARS?s Scientific Manuscript database
Cystinosis is a genetic disorder caused by malfunction of cystinosin and is characterized by accumulation of cystine. Cysteamine, the medication used in cystinosis, causes halitosis resulting in poor patient compliance. Halitosis is mainly caused by the formation of dimethylsulfide as the final prod...
Television Linguistics Program. 1967 Report.
ERIC Educational Resources Information Center
Glassner, Leonard E.
The program teaches comtemporary English grammar through principles of linguistic science to 12,000 students in Pittsburgh. Structural grammar is presented to eighth and ninth grade students, and transformational grammar to tenth graders. In 1966-67, the effectiveness of the program was evaluated by data processing of final examination results.…
High School Graduation Minimum Competency Requirements. Final Technical Report.
ERIC Educational Resources Information Center
Austin Independent School District, TX. Office of Research and Evaluation.
This technical report details the testing results and analyses supporting the evaluation findings related to the Austin (Texas) Independent School District (AISD) minimum competency graduation requirements. The graduation competency status of all AISD students in grades 8 to 12 are documented. The report provides additional information on the data…
ESEA Title I Migrant. Final Technical Report. Publication 80.40.
ERIC Educational Resources Information Center
Austin Independent School District, TX. Office of Research and Evaluation.
Data from 24 instruments used to evaluate the 1980-81 ESEA Title I Migrant program in the Austin (Texas) Independent School District are presented. A separate section for each instrument includes a description of purpose; procedures and results; and, where appropriate, relevant communications, instructions and statistical data. Summaries describe…
DOT National Transportation Integrated Search
2008-04-25
This report presents the results of the ITS Standards Testing Program for the field testing, assessment, and evaluation of the NTCIP standards that apply in the domain of Dynamic Message Signs (DMS). Specifically, the National Transportation Communic...
CETA: Manpower Programs under Local Control.
ERIC Educational Resources Information Center
Mirengoff, William; Rindler, Lester
This document presents the final report of a study conducted by the Committee on Evaluation and Training Programs to assess the impact of CETA (Comprehensive Employment and Training Act) on manpower programs. The report examines the differences between CETA Title I programs and their predecessors and compares legislative goals with results. It…
Flight Deck Interval Management Flight Test Final Report
NASA Technical Reports Server (NTRS)
Tulder, Paul V.
2017-01-01
This document provides a summary of the avionics design, implementation, and evaluation activities conducted for the ATD-1 Avionics Phase 2. The flight test data collection and a subset of the analysis results are described. This report also documents lessons learned, conclusions, and recommendations to guide further development efforts.
DOT National Transportation Integrated Search
1975-02-01
This technical appendix presents an overview of the national pedestrian safety effort. The appendix also reports the results of a survey of 48 ongoing educational programs being conducted in eight U.S. urban centers. A final chapter suggests procedur...
This report documents the activities performed during and the results obtained from the U.S. Environmental Protection Agency (EPA) arsenic removal treatment technology demonstration project at the White Rock Water Company (WRWC) public water system, a small residential drinking w...
DOT National Transportation Integrated Search
2016-07-01
Current Advanced Traveler Information Systems (ATIS) allow travelers to change their route, mode, departure time, route choice or destination to avoid delays and congestions, which results in improved traffic flow. This means higher vehicle speed, lo...
Evaluation of fog predictions and detection, Phase 2 : draft final report.
DOT National Transportation Integrated Search
2016-09-01
On January 29, 2012 at about 4:00 am a thick fog and smoke caused a multiple car crash just south of Gainesville, Florida. 11 people were killed and 18 were hospitalized. Nationally there are about 38,000 fog related accidents which result in about 6...
Chaffee, M.A.
1986-01-01
Geochemical sampling was conducted during 1982. This report summarizes the results of that investigation and provides details of the geochemical evaluation used in producing the final mineral resource assessment of the study area (Armstrong and others, 1983).
DOT National Transportation Integrated Search
2008-05-23
This report presents the results of the ITS Standards Testing Program for the field testing, assessment, and evaluation of the three volumes comprising the Standards for Traffic Management Center to Center Communications (TMDD) version 2.1 and the NT...
ERIC Educational Resources Information Center
Nathanson, Stanley N.
This report presents the results of an evaluation of the Cleff Job Matching System (CJMS). The CJMS provides a means by which jobs and job applicants can be matched at the semi- and low-skilled levels in both white- and blue-collar jobs. The CJMS operates by obtaining numerical profiles of both job seekers and jobs, across 16 Dimensions of Work,…
NASA Astrophysics Data System (ADS)
Zhao, Hui; Qu, Weilu; Qiu, Weiting
2018-03-01
In order to evaluate sustainable development level of resource-based cities, an evaluation method with Shapely entropy and Choquet integral is proposed. First of all, a systematic index system is constructed, the importance of each attribute is calculated based on the maximum Shapely entropy principle, and then the Choquet integral is introduced to calculate the comprehensive evaluation value of each city from the bottom up, finally apply this method to 10 typical resource-based cities in China. The empirical results show that the evaluation method is scientific and reasonable, which provides theoretical support for the sustainable development path and reform direction of resource-based cities.
Risk Evaluation of Bogie System Based on Extension Theory and Entropy Weight Method
Du, Yanping; Zhang, Yuan; Zhao, Xiaogang; Wang, Xiaohui
2014-01-01
A bogie system is the key equipment of railway vehicles. Rigorous practical evaluation of bogies is still a challenge. Presently, there is overreliance on part-specific experiments in practice. In the present work, a risk evaluation index system of a bogie system has been established based on the inspection data and experts' evaluation. Then, considering quantitative and qualitative aspects, the risk state of a bogie system has been evaluated using an extension theory and an entropy weight method. Finally, the method has been used to assess the bogie system of four different samples. Results show that this method can assess the risk state of a bogie system exactly. PMID:25574159
Risk evaluation of bogie system based on extension theory and entropy weight method.
Du, Yanping; Zhang, Yuan; Zhao, Xiaogang; Wang, Xiaohui
2014-01-01
A bogie system is the key equipment of railway vehicles. Rigorous practical evaluation of bogies is still a challenge. Presently, there is overreliance on part-specific experiments in practice. In the present work, a risk evaluation index system of a bogie system has been established based on the inspection data and experts' evaluation. Then, considering quantitative and qualitative aspects, the risk state of a bogie system has been evaluated using an extension theory and an entropy weight method. Finally, the method has been used to assess the bogie system of four different samples. Results show that this method can assess the risk state of a bogie system exactly.
DOT National Transportation Integrated Search
2003-10-01
The purpose of this document is to expand upon the evaluation components presented in "Computer-aided dispatch--traffic management center field operational test final evaluation plan : WSDOT deployment". This document defines the objective, approach,...
Characterization And Evaluation Of A Prototype Forward-Looking Automotive Radar (Flar), Final Report
DOT National Transportation Integrated Search
1997-03-01
This is the final report for a three-year Discretionary Cooperative Agreement with the National Highway Traffic Safety Administration (NHTSA Grant DTNH22-94-Y-17016), Characterization and Evaluation of a Forward-Looking automotive Radar Sensor....
DOT National Transportation Integrated Search
2006-05-01
This document provides the final report for the evaluation of the USDOT-sponsored Computer-Aided Dispatch - Traffic Management Center Integration Field Operations Test in the State of Washington. The document discusses evaluation findings in the foll...
Influence of different components in a TPV PP/EPDM based with low hardness
NASA Astrophysics Data System (ADS)
Gheller, J.; Jacobi, M. M.
2014-05-01
Thermoplastic vulcanizates (TPVs) are a class of polymeric material obtained by dynamic vulcanization of an elastomer in a melted thermoplastic matrix. This work intend to evaluate different variables in the production of low hardness TPVs made of polypropylene (PP) and ethylene propylene rubber (EPDM), as well the optimization of the variables looking for TPVs with improved performance. In the Study I the influence of PP crystallinity were evaluated, in the Study II the effects of different amounts of dicumyl peroxide (DCP) were evaluated and in the Study III the amount of the phenolic resin were evaluated. This extended abstract presents, in a more detailed way, the results considering the curative phenolic resin content (Study III). The others results and discussions are briefly described in the results and discussions section. The compounds were obtained in a closed mixing chamber and their processability properties, swelling, hardness and tensile strength were evaluated. With the results obtained were possible to evaluate the influence of different ingredients in the TPVs properties. The results were discussed and presented looking for a better understanding of the influence of this variable in the final product, as well the correlation between then.
Evaluation of a metering, mixing, and dispensing system for mixing polysulfide adhesive
NASA Technical Reports Server (NTRS)
Evans, Kurt B.
1989-01-01
Tests were performed to evaluate whether a metered mixing system can mix PR-1221 polysulfide adhesive as well as or better than batch-mixed adhesive; also, to evaluate the quality of meter-mixed PR-1860 and PS-875 polysulfide adhesives. These adhesives are candidate replacements for PR-1221 which will not be manufactured in the future. The following material properties were evaluated: peel strength, specific gravity and adhesive components of mixed adhesives, Shore A hardness, tensile adhesion strength, and flow rate. Finally, a visual test called the butterfly test was performed to observe for bubbles and unmixed adhesive. The results of these tests are reported and discussed.
Formal faculty observation and assessment of bedside skills for 3rd-year neurology clerks
Mooney, Christopher; Wexler, Erika; Mink, Jonathan; Post, Jennifer; Jozefowicz, Ralph F.
2016-01-01
Objective: To evaluate the feasibility and utility of instituting a formalized bedside skills evaluation (BSE) for 3rd-year medical students on the neurology clerkship. Methods: A neurologic BSE was developed for 3rd-year neurology clerks at the University of Rochester for the 2012–2014 academic years. Faculty directly observed 189 students completing a full history and neurologic examination on real inpatients. Mock grades were calculated utilizing the BSE in the final grade, and number of students with a grade difference was determined when compared to true grade. Correlation was explored between the BSE and clinical scores, National Board of Medical Examiners (NBME) scores, case complexity, and true final grades. A survey was administered to students to assess their clinical skills exposure and the usefulness of the BSE. Results: Faculty completed and submitted a BSE form for 88.3% of students. There was a mock final grade change for 13.2% of students. Correlation coefficients between BSE score and clinical score/NBME score were 0.36 and 0.35, respectively. A statistically significant effect of BSE was found on final clerkship grade (F2,186 = 31.9, p < 0.0001). There was no statistical difference between BSE score and differing case complexities. Conclusions: Incorporating a formal faculty-observed BSE into the 3rd year neurology clerkship was feasible. Low correlation between BSE score and other evaluations indicated a unique measurement to contribute to student grade. Using real patients with differing case complexity did not alter the grade. PMID:27770072
The impact of peer review on paediatric forensic reports.
Kariyawasam, Uditha
2016-10-01
To retrospectively evaluate the common grammar and spelling errors of the medico-legal reports written by the doctors at the Victorian Forensic Paediatric Medical Service (VFPMS) in both Royal Children's Hospital (RCH) and Monash Medical Centre. The reports were evaluated at two points in time; before and after peer review. The aim of the study was to ascertain whether peer review improved the grammar and spelling in VFPMS medico-legal reports. Draft VFPMS reports are sent to the VFPMS medical director for peer review. The current study sampled 50 reports that were sent consecutively to Dr. Anne Smith from 1st of May 2015. The 50 corresponding final reports were then retrieved from the VFPMS database. The 50 pairs of draft and final reports were scored using a 50-point scoring system. The scores of the draft reports were compared to the scores of the final report to assess if there was a change in quality as measured using an explicit criteria audit of report structure, simple grammar, jargon use and spelling. The audit did not include evaluation of the validity of forensic opinions. The overall scores were statistically analysed using descriptive statistics and a paired T-test. The scores of the reports improved by 2.24% when the final reports were compared to the draft reports (p < 0.001). The peer-review process resulted in a significantly higher quality of medico-legal reports. The report writing and peer-review process could be assisted by an abbreviated version of the checklist used for the audit. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Quarles, Stephen, L.; Sindelar, Melissa
2011-12-13
The primary goal of the Wildfire ignition resistant home design(WIRHD) program was to develop a home evaluation tool that could assess the ignition potential of a structure subjected to wildfire exposures. This report describes the tests that were conducted, summarizes the results, and discusses the implications of these results with regard to the vulnerabilities to homes and buildings.
Operations research methods improve chemotherapy patient appointment scheduling.
Santibáñez, Pablo; Aristizabal, Ruben; Puterman, Martin L; Chow, Vincent S; Huang, Wenhai; Kollmannsberger, Christian; Nordin, Travis; Runzer, Nancy; Tyldesley, Scott
2012-12-01
Clinical complexity, scheduling restrictions, and outdated manual booking processes resulted in frequent clerical rework, long waitlists for treatment, and late appointment notification for patients at a chemotherapy clinic in a large cancer center in British Columbia, Canada. A 17-month study was conducted to address booking, scheduling and workload issues and to develop, implement, and evaluate solutions. A review of scheduling practices included process observation and mapping, analysis of historical appointment data, creation of a new performance metric (final appointment notification lead time), and a baseline patient satisfaction survey. Process improvement involved discrete event simulation to evaluate alternative booking practice scenarios, development of an optimization-based scheduling tool to improve scheduling efficiency, and change management for implementation of process changes. Results were evaluated through analysis of appointment data, a follow-up patient survey, and staff surveys. Process review revealed a two-stage scheduling process. Long waitlists and late notification resulted from an inflexible first-stage process. The second-stage process was time consuming and tedious. After a revised, more flexible first-stage process and an automated second-stage process were implemented, the median percentage of appointments exceeding the final appointment notification lead time target of one week was reduced by 57% and median waitlist size decreased by 83%. Patient surveys confirmed increased satisfaction while staff feedback reported reduced stress levels. Significant operational improvements can be achieved through process redesign combined with operations research methods.
Chung, Kyu Sung; Ha, Jeong Ku; Yeom, Cheol Hyun; Ra, Ho Jong; Jang, Ho Su; Choi, Seung Hyuk; Kim, Jin Goo
2015-10-01
To compare the clinical and radiologic results of partial meniscectomy with those of refixation in patients with medial meniscus posterior root tears (MMPRTs) at a minimum 5-year follow-up. Between 2005 and 2009, patients with MMPRTs who had been followed up for at least 5 years after a partial meniscectomy (group M, n = 20) or pullout repair (group R, n = 37) were recruited. The mean follow-up duration was 67.5 months in group M and 72.0 months in group R. Clinical assessments, including the Lysholm score and International Knee Documentation Committee (IKDC) Subjective Knee Form score, and radiographic assessments, including the Kellgren-Lawrence (K-L) grade and medial joint space width, were evaluated preoperatively and at final follow-up. We compared the preoperative results with the final results in each group, and we compared the final results of groups M and R. Five-year survival rates were also evaluated. The mean Lysholm score (P = .039) and IKDC score (P = .037) improved significantly. However, the width of the medial joint space (P < .001) and K-L grade (P < .001) worsened significantly in both groups. When we compared the final results, group R had significantly better Lysholm scores (P = .002) and IKDC scores (P < .001) than group M. Group R showed less K-L grade progression (P = .005) and less medial joint space narrowing (P < .001) than group M. The rate of conversion to total knee arthroplasty was 35% in group M, whereas there was no conversion to total knee arthroplasty in group R. The 5-year survival rates in groups M and R were 75% and 100%, respectively (P < .001). For MMPRTs, refixation was more effective than partial meniscectomy in terms of the clinical and radiologic outcomes and survival for at least 5 years' follow-up. Refixation slowed the progression of arthritic changes compared with partial meniscectomy, although it did not prevent the progression of arthrosis completely. Level III, retrospective comparative study. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.
Final report on CCM key comparison CCM.D-K2: Comparison of liquid density standards
NASA Astrophysics Data System (ADS)
Bettin, Horst; Jacques, Claude; Zelenka, Zoltán; Fujii, Ken-ichi; Kuramoto, Naoki; Chang, Kyung-Ho; Lee, Yong Jae; Becerra, Luis Omar; Domostroeva, Natalia
2013-01-01
The results are presented of the key comparison CCM.D-K2 that covered the density measurements of four liquids: the density of water at 20 °C, of pentadecane at 15 °C, 20 °C, 40 °C and 60°C, of tetrachloroethlyene at 5 °C and 20 °C and of a viscous oil at 20 °C. Seven national metrology institutes measured the densities at atmospheric pressure by hydrostatic weighing of solid density standards in the time interval from 27 April 2004 to 28 June 2004. Since the participants were asked not to include components for a possible drift or inhomogeneity of the liquid in their uncertainty budget, these uncertainty contributions are investigated for the final evaluation of the data. For this purpose, results of stability and homogeneity measurements of the pilot laboratory are used. The participants decided not to include a possible drift of the liquid's density since no significant drift could be detected, and the influence of the drift and its uncertainty are negligible. Similarly, the inhomogeneity of the water and pentadecane samples is not significant and has no influence on the evaluation. Thus, it was neglected. Only the inhomogeneities of tetrachloroethylene and of the viscous oil were significant. Consequently, they were included in the evaluation. With one or two exceptions, the results show good agreement among the participants. Only in the case of water are the results clearly discrepant. The key comparison reference values were calculated by the weighted mean (taking into account a small correlation between two participants) in the case of consistent results. Otherwise the Procedure B of Cox was used. The expanded uncertainties of all reference densities are below 1 × 10-5 in relative terms. This satisfies the needs of all customers who wish to calibrate or check liquid density measuring instruments such as oscillation-type density meters. The comparison fully supports the calibration measurement capabilities table in the BIPM key comparison database. The results can be used to link regional comparisons to this CCM key comparison. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
ERIC Educational Resources Information Center
Cooley, Elizabeth
This final report describes the activities and outcomes of a 3-year federally funded project that developed and evaluated interventions aimed at increasing retention of special education teachers. The interventions developed and evaluated consisted of: (1) a series of stress management workshops aimed at preventing or alleviating teacher burnout,…
On the evaluation of segmentation editing tools
Heckel, Frank; Moltz, Jan H.; Meine, Hans; Geisler, Benjamin; Kießling, Andreas; D’Anastasi, Melvin; dos Santos, Daniel Pinto; Theruvath, Ashok Joseph; Hahn, Horst K.
2014-01-01
Abstract. Efficient segmentation editing tools are important components in the segmentation process, as no automatic methods exist that always generate sufficient results. Evaluating segmentation editing algorithms is challenging, because their quality depends on the user’s subjective impression. So far, no established methods for an objective, comprehensive evaluation of such tools exist and, particularly, intermediate segmentation results are not taken into account. We discuss the evaluation of editing algorithms in the context of tumor segmentation in computed tomography. We propose a rating scheme to qualitatively measure the accuracy and efficiency of editing tools in user studies. In order to objectively summarize the overall quality, we propose two scores based on the subjective rating and the quantified segmentation quality over time. Finally, a simulation-based evaluation approach is discussed, which allows a more reproducible evaluation without the need for human input. This automated evaluation complements user studies, allowing a more convincing evaluation, particularly during development, where frequent user studies are not possible. The proposed methods have been used to evaluate two dedicated editing algorithms on 131 representative tumor segmentations. We show how the comparison of editing algorithms benefits from the proposed methods. Our results also show the correlation of the suggested quality score with the qualitative ratings. PMID:26158063
[Impact of a training model for the Child Development Evaluation Test in primary care].
Rizzoli-Córdoba, Antonio; Delgado-Ginebra, Ismael; Cruz-Ortiz, Leopoldo Alfonso; Baqueiro-Hernández, César Iván; Martain-Pérez, Itzamara Jacqueline; Palma-Tavera, Josuha Alexander; Villasís-Keever, Miguel Ángel; Reyes-Morales, Hortensia; O'Shea-Cuevas, Gabriel; Aceves-Villagrán, Daniel; Carrasco-Mendoza, Joaquín; Antillón-Ocampo, Fátima Adriana; Villagrán-Muñoz, Víctor Manuel; Halley-Castillo, Elizabeth; Vargas-López, Guillermo; Muñoz-Hernández, Onofre
The Child Development Evaluation (CDE) Test is a screening tool designed and validated in Mexico for the early detection of child developmental problems. For professionals who will be administering the test in primary care facilities, previous acquisition of knowledge about the test is required in order to generate reliable results. The aim of this work was to evaluate the impact of a training model for primary care workers from different professions through the comparison of knowledge acquired during the training course. The study design was a before/after type considering the participation in a training course for the CDE test as the intervention. The course took place in six different Mexican states from October to December 2013. The same questions were used before and after. There were 394 participants included. Distribution according to professional profile was as follows: general physicians 73.4%, nursing 7.7%, psychology 7.1%, nutrition 6.1% and other professions 5.6%. The questions with the lowest correct answer rates were associated with the scoring of the CDE test. In the initial evaluation, 64.9% obtained a grade lower than 20 compared with 1.8% in the final evaluation. In the initial evaluation only 1.8% passed compared with 75.15% in the final evaluation. The proposed model allows the participants to acquire general knowledge about the CDE Test. To improve the general results in future training courses, it is required to reinforce during training the scoring and interpretation of the test together with the previous lecture of the material by the participants. Copyright © 2015 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.
Hu, Wei; Liu, Guangbing; Tu, Yong
2016-01-01
This paper applied the fuzzy comprehensive evaluation (FCE) technique and analytic hierarchy process (AHP) procedure to evaluate the wastewater treatment for enterprises. Based on the characteristics of wastewater treatment for enterprises in Taihu basin, an evaluating index system was established for enterprise and analysis hierarchy process method was applied to determine index weight. Then the AHP and FCE methods were combined to validate the wastewater treatment level of 3 representative enterprises. The results show that the evaluation grade of enterprise 1, enterprise 2 and enterprise 3 was middle, good and excellent, respectively. Finally, the scores of 3 enterprises were calculated according to the hundred-mark system, and enterprise 3 has the highest wastewater treatment level, followed by enterprise 2 and enterprises 1. The application of this work can make the evaluation results more scientific and accurate. It is expected that this work may serve as an assistance tool for managers of enterprise in improving the wastewater treatment level.
NASA Technical Reports Server (NTRS)
1981-01-01
This report summarizes the Wing Planform Study Task and Final Configuration Selection of the Integrated Application of Active Controls (IAAC) Technology Project within the Energy Efficient Transport Program. Application of Active Controls Technology (ACT) in combination with increased wing span resulted in significant improvements over the Conventional Baseline Configuration (Baseline) and the Initial ACT Configuration previously established. The configurations use the same levels of technology (except for ACT), takeoff gross weight, and payload as the Baseline. The Final ACT Configuration (Model 768-107) incorporates pitch-augmented stability (which enabled an approximately 10% aft shift in cruise center of gravity and a 45% reduction in horizontal tail sizes), lateral/directional-augmented stability, an angle-of-attack limiter, and wing-load alleviation. Flutter-mode control was not beneficial for this configuration. This resulted in an 890 kg (1960 lb) reduction in airplane takeoff gross weight and a 9.8% improvement in cruise lift/drag. At the Baseline mission range (3590 km) (1938 nmi), this amounts to 10% block fuel reduction. Good takeoff performance at high-altitude airports on a hot day was also achieved. Results of this task strongly indicate that the IAAC Project should proceed with the Final ACT evaluation and begin the required control system development and testing.
DOT National Transportation Integrated Search
2006-07-01
This document provides the final report for the evaluation of the USDOT-sponsored Computer-Aided Dispatch Traffic Management Center Integration Field Operations Test in the State of Utah. The document discusses evaluation findings in the followin...
7 CFR 1944.419 - Final grantee evaluation.
Code of Federal Regulations, 2010 CFR
2010-01-01
...) PROGRAM REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.419 Final grantee... Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS..., application, this regulation, and any amendments. (a) This is a quantitative evaluation of the grantee to...
DOT National Transportation Integrated Search
2004-01-01
The purpose of this document is to expand upon the evaluation components presented in "Computer-aided dispatch--traffic management center field operational test final evaluation plan : state of Utah". This document defines the objective, approach, an...
DOT National Transportation Integrated Search
2015-03-01
This final report documents transit-related enhancements to the Regional Integration Transportation Information System (RITIS), creation of the RITIS Chat Instant Messaging tool, and final project evaluation of the effectiveness of the RITIS Chat too...
Field evaluation of skid resistant surfaces : final report : part I.
DOT National Transportation Integrated Search
1970-06-01
This project was undertaken to establish a thin bituminous surface course that would possess good skid resistant qualities as well as, being both economical and durable. : This is the final report on the evaluation of skid resistant surfaces which wa...
ERIC Educational Resources Information Center
Ministerio de Cultura y Educacion, Buenos Aires (Argentina). Centro National de Documentacion e Informacion Educativa.
This document contains the legislation creating the National Committee for Analysis and Evaluation of the Educational System and the final report of that committee's first meeting. The report deals with each level from elementary to higher education. For each level it describes and considers curriculum, school buildings, human resources, current…
NASA Astrophysics Data System (ADS)
Brodic, D.
2011-01-01
Text line segmentation represents the key element in the optical character recognition process. Hence, testing of text line segmentation algorithms has substantial relevance. All previously proposed testing methods deal mainly with text database as a template. They are used for testing as well as for the evaluation of the text segmentation algorithm. In this manuscript, methodology for the evaluation of the algorithm for text segmentation based on extended binary classification is proposed. It is established on the various multiline text samples linked with text segmentation. Their results are distributed according to binary classification. Final result is obtained by comparative analysis of cross linked data. At the end, its suitability for different types of scripts represents its main advantage.
AC Power at Power Frequencies: Bilateral comparison between SASO NMCC and TÜBİTAK UME
NASA Astrophysics Data System (ADS)
Çaycı, Hüseyin; Yılmaz, Özlem; AlRobaish, Abdullah M.; AlAnazi, Shafi S.; AlAyali, Ahmed R.; AlRumie, Rashed A.
2018-01-01
A supplementary bilateral comparison measurement on AC Power at 50/60 Hz between SASO NMCC (GULFMET) and TÜBİTAK UME (EURAMET) was performed with the primary power standards of each partner. Measurement methods and setups which are very similar of the participants, measurement results, calculation of differences in the results, evaluation of uncertainties are given within this report. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCEM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
Trushkowsky, Richard; Arias, David Montalvo; David, Steven
Prior to initiating any treatment, it is necessary to visualize the desired outcomes. It then becomes possible to formulate the steps required to achieve this result. Digital Smile Design (DSD) utilizes patient input and information gathered through diagnostic procedures to create an esthetic treatment scheme. In the case presented here, the NYUCD Esthetic Evaluation Form, intraoral and extraoral photographs, mounted diagnostic casts, physical examination, and radiographs were the diagnostic modalities. The gathered information served as a starting point for a wax-up and intraoral mock-up. This case report demonstrates how the DSD served as a template for crown lengthening procedures and design of the final porcelain veneer restorations.
Local motion-compensated method for high-quality 3D coronary artery reconstruction
Liu, Bo; Bai, Xiangzhi; Zhou, Fugen
2016-01-01
The 3D reconstruction of coronary artery from X-ray angiograms rotationally acquired on C-arm has great clinical value. While cardiac-gated reconstruction has shown promising results, it suffers from the problem of residual motion. This work proposed a new local motion-compensated reconstruction method to handle this issue. An initial image was firstly reconstructed using a regularized iterative reconstruction method. Then a 3D/2D registration method was proposed to estimate the residual vessel motion. Finally, the residual motion was compensated in the final reconstruction using the extended iterative reconstruction method. Through quantitative evaluation, it was found that high-quality 3D reconstruction could be obtained and the result was comparable to state-of-the-art method. PMID:28018741
Wavelet-Based Visible and Infrared Image Fusion: A Comparative Study
Sappa, Angel D.; Carvajal, Juan A.; Aguilera, Cristhian A.; Oliveira, Miguel; Romero, Dennis; Vintimilla, Boris X.
2016-01-01
This paper evaluates different wavelet-based cross-spectral image fusion strategies adopted to merge visible and infrared images. The objective is to find the best setup independently of the evaluation metric used to measure the performance. Quantitative performance results are obtained with state of the art approaches together with adaptations proposed in the current work. The options evaluated in the current work result from the combination of different setups in the wavelet image decomposition stage together with different fusion strategies for the final merging stage that generates the resulting representation. Most of the approaches evaluate results according to the application for which they are intended for. Sometimes a human observer is selected to judge the quality of the obtained results. In the current work, quantitative values are considered in order to find correlations between setups and performance of obtained results; these correlations can be used to define a criteria for selecting the best fusion strategy for a given pair of cross-spectral images. The whole procedure is evaluated with a large set of correctly registered visible and infrared image pairs, including both Near InfraRed (NIR) and Long Wave InfraRed (LWIR). PMID:27294938
Wavelet-Based Visible and Infrared Image Fusion: A Comparative Study.
Sappa, Angel D; Carvajal, Juan A; Aguilera, Cristhian A; Oliveira, Miguel; Romero, Dennis; Vintimilla, Boris X
2016-06-10
This paper evaluates different wavelet-based cross-spectral image fusion strategies adopted to merge visible and infrared images. The objective is to find the best setup independently of the evaluation metric used to measure the performance. Quantitative performance results are obtained with state of the art approaches together with adaptations proposed in the current work. The options evaluated in the current work result from the combination of different setups in the wavelet image decomposition stage together with different fusion strategies for the final merging stage that generates the resulting representation. Most of the approaches evaluate results according to the application for which they are intended for. Sometimes a human observer is selected to judge the quality of the obtained results. In the current work, quantitative values are considered in order to find correlations between setups and performance of obtained results; these correlations can be used to define a criteria for selecting the best fusion strategy for a given pair of cross-spectral images. The whole procedure is evaluated with a large set of correctly registered visible and infrared image pairs, including both Near InfraRed (NIR) and Long Wave InfraRed (LWIR).
1993-07-28
Below is a summary of Vanderbilt’s response, requested by Health Services Command ( HSC ), to the final report prepared by the Directorate of Health Care...Command’s ( HSC ) demands for client data it sought to use somehow in power analysis (see Appendix F). Dr. Kapadia’s statement is the standard view held...not involve actual data, the results from this method may be entirely misleading and not accurate." When HSC demanded client data for power analysis in
Graph-based urban scene analysis using symbolic data
NASA Astrophysics Data System (ADS)
Moissinac, Henri; Maitre, Henri; Bloch, Isabelle
1995-07-01
A framework is presented for the interpretation of a urban landscape based on the analysis of aerial pictures. This method has been designed for the use of a priori knowledge provided by a geographic map in order to improve the image analysis stage. A coherent final interpretation of the studied area is proposed. It relies on a graph based data structure to modelize the urban landscape, and on a global uncertainty management to evaluate the final confidence we can have in the results presented. This structure and uncertainty management tend to reflect the hierarchy of the available data and the interpretation levels.
Shon, Min Soo; Koh, Kyoung Hwan; Lim, Tae Kang; Kim, Won Ju; Kim, Kyung Cheon; Yoo, Jae Chul
2015-08-01
Arthroscopic partial repair is a treatment option in irreparable large-to-massive rotator cuff tears without arthritic changes. However, there are indications that arthroscopic partial repair does not yield satisfactory outcomes. To report the clinical and radiographic results of arthroscopic partial repairs in patients with irreparable large-to-massive cuff tears. In addition, an analysis was performed regarding preoperative factors that may influence patient outcomes and patient-rated satisfaction over time. Case series; Level of evidence, 4. From 2005 to 2011, a total of 31 patients who underwent arthroscopic partial repair for irreparable large-to-massive cuff tears were retrospectively evaluated. Partial repair was defined as posterior cuff tissue repair with or without subscapularis tendon repair to restore the transverse force couple of the cuff. Pain visual analog scale (PVAS), questionnaire results (American Shoulder and Elbow Surgeons [ASES] and Simple Shoulder Test [SST]), and radiographic changes (acromiohumeral distance and degenerative change) were assessed preoperatively, at first follow-up (roughly 1 year postoperatively), and at final follow-up (>2 years postoperatively). Patients rated their satisfaction level at each postoperative follow-up as well. Preoperative factors that might influence outcomes, such as patient demographics, tear size, and fatty infiltration, were investigated. The preoperative, first follow-up, and final follow-up results for mean PVAS (5.13, 2.13, and 3.16, respectively) and questionnaires (ASES: 41.97, 76.37, and 73.78; SST: 3.61, 6.33, and 6.07, respectively) improved significantly (all P < .05). Radiographic evaluation showed no difference compared with preoperative status. Nevertheless, patient-rated satisfaction at final evaluation was inferior: 16 good responses ("very satisfied" and "satisfied") and 15 poor responses ("rather the same" and "dissatisfied"). Despite initial improvements in both groups (P < .05), patients with poor satisfaction demonstrated statistically significant deterioration in mean PVAS (from 2.07 to 4.67), questionnaire scores (ASES: from 74.56 to 59.80; SST: from 5.11 to 3.81), and acromiohumeral distance (from 7.19 to 5.06 mm) between the first and final follow-up (all P < .05). Patients with good satisfaction showed no significant difference or they improved (P > .05) from the first to the final follow-up. Among preoperative factors, fatty infiltration of the teres minor was identified as the only statistically significant factor affecting patient-rated satisfaction (P = .007). This study showed that arthroscopic partial repair may produce initial improvement in selected outcomes at 2-year follow-up. However, about half of the patients in the study were not satisfied with their outcomes, which had deteriorated over time. Preoperative fatty infiltration of the teres minor was the only factor that correlated with worse final outcomes and poor satisfaction after arthroscopic partial repair. © 2015 The Author(s).
Mid-term Results of Total Knee Arthroplasty Using PFC Sigma RP-F.
Kim, Jun-Young; Cheon, Sang-Ho; Kyung, Hee-Soo
2012-12-01
We compared the mid-term results after total knee arthroplasty (TKA) using PFC Sigma RP-F mobile model with PFC Sigma PS fixed model. We analyzed 45 knees that underwent TKA with PFC Sigma RP-Fn (study group) and 45 knees with PFC Sigma PS (control group). The mean follow-up period was 65 months (range, 60-69 months). The evaluation system of the American knee society was used for clinical and radiological assessment. Also, the maximal knee flexion angle was assessed. The mean maximum flexion angle in the study group (135°) was greater than that in the control group (125°) at the early post-operation & final follow-up period (p=0.033). The range of motion (ROM) in the study group was recovered earlier at the postoperative 6 months, and ROM gain was improved to a greater extent at the final follow-up period (p=0.039). The knee score and function score and radiographic evaluation were no difference between the two groups (p>0.05) at the final follow-up. The two cases of radiolucency in posterior condyle and medial tibial plateau and one case of patellar elongation were seen in the study group. The PFC Sigma RP-F mobile system appears to facilitate greater maximum flexion angle and ROM gain with two cases of radiolucent line.
NREL Evaluates Performance of Fast-Charge Electric Buses
DOE Office of Scientific and Technical Information (OSTI.GOV)
2016-09-16
This real-world performance evaluation is designed to enhance understanding of the overall usage and effectiveness of electric buses in transit operation and to provide unbiased technical information to other agencies interested in adding such vehicles to their fleets. Initial results indicate that the electric buses under study offer significant fuel and emissions savings. The final results will help Foothill Transit optimize the energy-saving potential of its transit fleet. NREL's performance evaluations help vehicle manufacturers fine-tune their designs and help fleet managers select fuel-efficient, low-emission vehicles that meet their bottom line and operational goals. help Foothill Transit optimize the energy-saving potentialmore » of its transit fleet. NREL's performance evaluations help vehicle manufacturers fine-tune their designs and help fleet managers select fuel-efficient, low-emission vehicles that meet their bottom line and operational goals.« less
Risk analysis of computer system designs
NASA Technical Reports Server (NTRS)
Vallone, A.
1981-01-01
Adverse events during implementation can affect final capabilities, schedule and cost of a computer system even though the system was accurately designed and evaluated. Risk analysis enables the manager to forecast the impact of those events and to timely ask for design revisions or contingency plans before making any decision. This paper presents a structured procedure for an effective risk analysis. The procedure identifies the required activities, separates subjective assessments from objective evaluations, and defines a risk measure to determine the analysis results. The procedure is consistent with the system design evaluation and enables a meaningful comparison among alternative designs.
Problems of psychological monitoring in astronaut training.
Morgun, V V
1997-10-01
Monitoring of the goal-oriented psychological changes of a man during professional training is necessary. The level development of the astronaut psychic features is checked by means of psychological testing with the final aim to evaluate each professionally important psychological qualities and to evaluate in general. The list of psychological features needed for evaluation is determined and empirically selected weight factors based on wide statistical sampling is introduced. Accumulation of psychological test results can predict an astronaut's ability of solving complicated problems in a flight mission. It can help to correct the training process and reveal weakness.
The 100 cm solar telescope primary mirror study
NASA Technical Reports Server (NTRS)
1975-01-01
The manufacturing impact of primary mirror configuration on the performance of a 100 cm aperture solar telescope was studied. Three primary mirror configurations were considered: solid, standard lightweight, and mushroom. All of these are of low expansion material. Specifically, the study consisted of evaluating the mirrors with regard to: manufacturing metrology, manufacturing risk factors and ultimate quality assessment. As a result of this evaluation, a performance comparison of the configurations was made, and a recommendation of mirror configuration is the final output. These evaluations, comparisons and recommendations are discussed in detail. Other investigations were completed and are documented in the appendices.
NASA Technical Reports Server (NTRS)
Oken, S.; Skoumal, D. E.; Straayer, J. W.
1974-01-01
The development of metal structures reinforced with filamentary composites as a weight saving feature of the space shuttle components is discussed. A frame was selected for study that was representative of the type of construction used in the bulk frames of the orbiter vehicle. Theoretical and experimental investigations were conducted. Component tests were performed to evaluate the critical details used in the designs and to provide credibility to the weight saving results. A model frame was constructed of the reinforced metal material to provide a final evaluation of the construction under realistic load conditions.
Research on image complexity evaluation method based on color information
NASA Astrophysics Data System (ADS)
Wang, Hao; Duan, Jin; Han, Xue-hui; Xiao, Bo
2017-11-01
In order to evaluate the complexity of a color image more effectively and find the connection between image complexity and image information, this paper presents a method to compute the complexity of image based on color information.Under the complexity ,the theoretical analysis first divides the complexity from the subjective level, divides into three levels: low complexity, medium complexity and high complexity, and then carries on the image feature extraction, finally establishes the function between the complexity value and the color characteristic model. The experimental results show that this kind of evaluation method can objectively reconstruct the complexity of the image from the image feature research. The experimental results obtained by the method of this paper are in good agreement with the results of human visual perception complexity,Color image complexity has a certain reference value.
Evaluating safety and operation of high-speed signalized intersections : final report, March 2010.
DOT National Transportation Integrated Search
2010-03-01
This Final Report reviews a research effort to evaluate the safety and operations of high-speed intersections in the State of : Oregon. In particular, this research effort focuses on four-leg, signalized intersections with speed limits of 45 mph or :...
ERIC Educational Resources Information Center
Murphy, Philip J.
The paper reports the final evaluation of a program for approximately 143 learning disabled (LD) students (grades 6-to-12) from six school districts. A number of test instruments were used to evaluate student progress during the program, including the Wide Range Achievement Test (WRAT), the Durrell Analysis of Reading Difficulty, and the…
ERIC Educational Resources Information Center
Grannis, Joseph; And Others
This document, a two-volume report, provides in volume 1 the final longitudinal evaluation of the New York City Dropout Prevention Initiative (DPI), 1985-86 through 1987-88. (The second volume comprises appendices containing summaries of each previous evaluation for this time period.) The DPI was implemented in 13 high schools and 29 feeder middle…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Martin, D.C.
1963-10-31
Results are reported from an evaluation of the effects of radiation processing on the quality and storage life of cauliflower, broccoli, and strawberries after storage at temperatures slightly above freezing for periods up to 12 months. Irradiation was effective in preventing visible spoilage, even at a dose of 0.3 Mrad. Acceptability of samples stored at 35 deg F declined with each succeeding evaluation. (C.H.)
Kamangar, Faranak; Davari, Parastoo; Azari, Rahman; Fitzmaurice, Sarah; Li, Chin-Shang; Eisen, Daniel B; Fazel, Nasim
2017-05-22
Application to dermatology residency is a highly competitive process. Although factors associated with successfully matching have been studied, less is known regarding the ability of admissions committees to screen applicants in a uniform manner or the importance of the interview in ranking applicants. Our goal was to retrospectively measure our admission committee evaluators' concordance regarding residency application credentials and interview performance, and ultimately the effects on final applicant ranking.
Toxicity Evaluation of Pig Slurry Using Luminescent Bacteria and Zebrafish
Chen, Wenyan; Cai, Qiang; Zhao, Yuan; Zheng, Guojuan; Liang, Yuting
2014-01-01
Biogas slurry has become a serious pollution problem and anaerobic digestion is widely applied to pig manure treatment for environmental protection and energy recovery. To evaluate environmental risk of the emission of biogas slurry, luminescent bacteria (Vibrio fischeri), larvae and embryos of zebrafish (Danio rerio) were used to detect the acute and development toxicity of digested and post-treated slurry. Then the ability of treatment process was evaluated. The results showed that digested slurry displayed strong toxicity to both zebrafish and luminescent bacteria, while the EC50 for luminescent bacteria and the LC50 for larvae were only 6.81% (v/v) and 1.95% (v/v) respectively, and embryonic development was inhibited at just 1% (v/v). Slurry still maintained a high level of toxicity although it had been treated by membrane bioreactor (MBR), while the LC50 of larvae was 75.23% (v/v) and there was a little effect on the development of embryos and V. fischeri; the results also revealed that the zebrafish larvae are more sensitive than embryos and luminescent bacteria to pig slurry. Finally, we also found the toxicity removal rate was higher than 90% after the treatment of MBR according to toxicity tests. In conclusion, further treatment should be used in pig slurry disposal or reused of final effluent. PMID:24995598
Cosmic Ray Exposure & Linear-Energy-Transfer Evaluations for the COBE Mission
NASA Technical Reports Server (NTRS)
Stassinopoulos, E. G.; Barth, J. M.
1984-01-01
Magnetospherically attenuated, orbit integrated, surface incident cosmic ray fluxes of galactic origin were determined for the COBE mission. All heavy ions up to Nickel (z=28) were considered in this, evaluation. In order to provide worst case approximations, estimates were based on solar minimum conditions. Transport and material shielding calculations were then performed for these vehicle encountered particles, for a simple spherical 3-D aluminum geometry, and the materially attenuated cosmic ray distributions emerging behind selected shield thicknesses were obtained. Finally, Linear-Energy-Transfer (LET) spectra were evaluated for the energy spectra of each ion specie and these were, in turn, integrated into the sum-total LET distribution contained in this report. The results are presented in tabular and graphical form for eight (8) different shield thicknesses from.01 to 10.0 gm/cm2 of aluminum. They show most conclusively, and not unexpectedly, that material shielding has virtually no 'effect on the final LET spectrum, at least not for aluminum shields. This was predictable. Please note that in the LET graphs, two curves were plotted. Of these, please ignore the one labeled "grazing" and use only the one labeled "normal". Again, it should be remembered that the end results contain contributions from all elements up to Nickel (z=28).
Helminen, Kristiina; Johnson, Martin; Isoaho, Hannu; Turunen, Hannele; Tossavainen, Kerttu
2017-12-01
To describe the phenomenon of final assessment of the clinical practice of nursing students and to examine whether there were differences in assessments by the students and their teachers and mentors. Final assessment of students in clinical practice during their education has great importance for ensuring that enough high-quality nursing students are trained, as assessment tasks affect what the nursing student learns during the clinical practice. This study used descriptive, cross-sectional design. The population of this study comprised nursing students (n = 276) and their teachers (n = 108) in five universities of applied sciences in Finland as well as mentors (n = 225) who came from five partner hospitals. A questionnaire developed for this study contained questions about background variables as well as structured questions scored on a four-point scale, which also allowed the respondents to provide additional comments. When comparing the results related to nursing teachers' presence in the final assessment situation, it was found that teachers and mentors evaluated this as being carried out more often than nursing students suggested. Nursing students noted that fair and consistent assessment is carried out more often than nursing teachers thought. Mentors and teachers said that honest and direct criteria-based final assessment was carried out more often than nursing students evaluated. Nursing students and mentors need support from educational institutions and from nursing teachers in order to ensure the completion of a relevant assessment process. The findings of this study highlight an awareness of final assessment process. It is desirable to have a common understanding, for example, of how the assessment should be managed and what the assessment criteria are, as this will ensure a good quality process. © 2017 John Wiley & Sons Ltd.
Improved self-exclusion program: preliminary results.
Tremblay, Nicole; Boutin, Claude; Ladouceur, Robert
2008-12-01
The gambling industry has offered self-exclusion programs for quite a long time. Such measures are designed to limit access to gaming opportunities and provide problem gamblers with the help they need to cease or limit their gambling behaviour. However, few studies have empirically evaluated these programs. This study has three objectives: (1) to observe the participation in an improved self-exclusion program that includes an initial voluntary evaluation, phone support, and a mandatory meeting, (2) to evaluate satisfaction and usefulness of this service as perceived by self-excluders, (3) to measure the preliminary impact of this improved program. One hundred sixteen self-excluders completed a questionnaire about their satisfaction and their perception of the usefulness during the mandatory meeting. Among those participants, 39 attended an initial meeting. Comparisons between data collected at the initial meeting and data taken at the final meeting were made for those 39 participants. Data showed that gamblers chose the improved self-exclusion program 75% of the time; 25% preferred to sign a regular self-exclusion contract. Among those who chose the improved service, 40% wanted an initial voluntary evaluation and 37% of these individuals actually attended that meeting. Seventy percent of gamblers came to the mandatory meeting, which was a required condition to end their self-exclusion. The majority of participants were satisfied with the improved self-exclusion service and perceived it as useful. Major improvements were observed between the final and the initial evaluation on time and money spent, consequences of gambling, DSM-IV score, and psychological distress. The applicability of an improved self-exclusion program is discussed and, as shown in our study, the inclusion of a final mandatory meeting might not be so repulsive for self-excluders. Future research directives are also proposed.
75 FR 57302 - Advisory Committee on Reactor Safeguards; Public Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-20
... Monday, October 14, 2009, (74 FR 52829-52830). Thursday, October 7, 2010, Conference Room T2-B1, Two....: Final Safety Evaluation Report Associated with the Economic Simplified Boiling Water Reactor (ESBWR..., Inc. regarding the final Safety Evaluation Report associated with the ESBWR design certification...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Litowitz, L.S.
The unit of instruction was developed and refined in three stages. In the first stage, potential objectives for the unit of instruction were identified from appropriate literature. The objectives were mailed to a group primarily consisting of IA/TE state supervisors for critiquing. Upon receiving responses from the critique group, a revised list of objectives was created. From this revised list a content framework was developed. The content framework was then submitted for critiquing to a second group primarily consisting of energy and power curriculum developers. The responses from the second critique group were summarized, and a refined content framework wasmore » produced. A series of twelve hand-on learning activities for junior high school students were then developed to fulfill the unit objectives and concepts identified in the content framework. These activities were critiqued by a final group of experts representing in-service junior high school IA/TE teachers. Revisions to the unit of instruction were made based on feedback from the final critique group. The unit of instruction was then implemented in a junior high school setting as a final means of obtaining formative evaluation. Results of the formative evaluation indicated that the students who participated in the field test had met many of the unit objectives. Recommendations as to the use of the unit of instruction were made.« less
The timber industries of Pennsylvania, 1988
Eric H. Wharton; John L. Bearer; John L. Bearer
1993-01-01
Evaluates regional timber output of Pennsylvania. Results are based on a survey of primary processing mills located in the state, and of mills in other states that used wood from Pennsylvania. Contains statistics on industrial timber production and mill receipts and the production and final end use of manufacturing residues. Comparisons are made between historical and...
DOT National Transportation Integrated Search
2009-08-01
The development and evaluation of low-cracking high-performance concrete (LC-HPC) for use in bridge decks : is described based on laboratory test results and experience gained during the construction of 14 bridges. This report : emphasizes the materi...
The impact of organizational structure on flight software cost risk
NASA Technical Reports Server (NTRS)
Hihn, Jairus; Lum, Karen; Monson, Erik
2004-01-01
This paper summarizes the final results of the follow-up study updating the estimated software effort growth for those projects that were still under development and including an evaluation of the roles versus observed cost risk for the missions included in the original study which expands the data set to thirteen missions.
The report discusses results of a conceptual design, cost, and evaluation study of energy recovery from landfill gas using a commercial phosphoric acid fuel cell power plant. The conceptual design of the fuel cell energy recovery system is described, and its economic and environm...
Brief Strategic Family Therapy for Young People in Treatment for Drug Use
ERIC Educational Resources Information Center
Lindstrøm, Maia; Filges, Trine; Jørgensen, Anne-Marie Klint
2015-01-01
Purpose: This review evaluates the evidence on the effects of brief strategic family therapy (BSFT) on drug use reduction for young people in treatment for nonopioid drug use. Method: We followed Campbell Collaboration guidelines to prepare this review and ultimately located three studies for final analysis and interpretation. Results: The results…
DOT National Transportation Integrated Search
1987-01-01
This is the final report on analyses of the available 1985 enforcement and adjudication data relating to New York State's Mandatory Occupant Restraint Law. In the first year of the law there were over 30,000 violations that resulted in conviction. Th...
This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at an Arizona Water Company (AWC) facility in Sedona, AZ, commonly referred to as Valley Vista. The objectives of the project were t...
On board processor development for NASA's spaceborne imaging radar with system-on-chip technology
NASA Technical Reports Server (NTRS)
Fang, Wai-Chi
2004-01-01
This paper reports a preliminary study result of an on-board spaceborne SAR processor. It consists of a processing requirement analysis, functional specifications, and implementation with system-on-chip technology. Finally, a minimum version of this on-board processor designed for performance evaluation and for partial demonstration is illustrated.
Project Report, Part One, Final Report for Phase I, Rural Shared Services.
ERIC Educational Resources Information Center
Northern Montana Coll., Havre.
In an attempt to identify, synthesize, and evaluate shared services research and development efforts conducted throughout the nation, and bring those results together in a single report, Part One of a four-part report defines rural shared services and the organizational patterns under which shared service activity exists, describes the activities…
Enrichment of Teacher and Counselor Competencies in Career Education: K-6. Final Report.
ERIC Educational Resources Information Center
Peterson, Marla; And Others
The purpose of the Enrichment of Teacher and Counselor Competencies in Career Education Project (ETC Project) was to develop, evaluate, and disseminate: (1) Career Education Curriculum guides which result in the integration of positive values and attitudes toward work, self-awareness, and development of decision making skills; and awareness of…
Measurement of centering error for probe of swing arm profilometer using a spectral confocal sensor
NASA Astrophysics Data System (ADS)
Chen, Lin; Jing, Hongwei; Wei, Zhongwei; Cao, Xuedong
2015-02-01
A spectral confocal sensor was used to measure the centering error for probe of swing arm profilometer (SAP). The feasibility of this technology was proved through simulation and experiment. The final measurement results was also analyzed to evaluate the advantages and disadvantages of this technology.
From Course Assessment to Redesign: A Hybrid-Vehicle Course as a Case Illustration
ERIC Educational Resources Information Center
Stanton, Ken C.; Bradley, Thomas H.
2013-01-01
Assessment has become a central aspect of engineering education for evaluating student learning, attaining accreditation, and ensuring accountability. However, the final step of the assessment process, which requires assessment results be used to redesign courses and programmes, is appreciably underdeveloped in the literature. As such, this work…
DOE Office of Scientific and Technical Information (OSTI.GOV)
BRONOWSKI,DAVID R.
The US Department of Energy Offices of Defense Programs and Civilian Radioactive Waste Management jointly sponsored a program to evaluate elastomeric O-ring seal materials for radioactive material shipping containers. The report presents the results of low- and high-temperature tests conducted on 27 common elastomeric compounds.
Final Evaluation Report on the Texarkana Dropout Prevention Program.
ERIC Educational Resources Information Center
Andrew, Dean C.; Roberts, Lawrence H.
The Texarkana Dropout Prevention Program is an educational innovation in which (1) a private company was placed under contract to set up special, remedial instruction in the public schools, and (2) the company was to be paid according to the results produced under a performance contract. Dorsett Educational Systems operated six rapid learning…
Follow Through Classroom Process Measurement and Pupil Growth (1970-71). Final Report.
ERIC Educational Resources Information Center
Soar, Robert S.
This study presents results from the last year of a three-year adjunctive evaluation of classroom process measurement and pupil growth. A total of 289 classrooms involving eight experimental programs, ranging from open classrooms to contingency management classes, along with a comparison sample, were observed. Four observation instruments were…
An integrator final exam at the end of the engineering degrees to evaluate the acquired competences
NASA Astrophysics Data System (ADS)
Perdigones, A.; Sánchez, E.; Valiño, V.; Tarquis, A. M.
2010-05-01
In the last decade strong changes in the design of university degrees have occurred in Spain, affecting real competences acquired by graduates. The new degrees often provide students greater freedom in shaping their curriculum which results in many cases in a problem for their training. In engineering degrees of Spain, the final project, that allows to know the integrated skills of the students in engineering subjects, is not compulsory anymore; it can be substituted for other specific types of work that often do not involve skills valued by the companies of the industrial sector. This situation may create doubts about the real competences of the graduates. In the present study, a final exam (voluntary) has been carried out during three years to assess competences in engineering students in the last course of the degree in agricultural engineering (diploma of five years) and agricultural technical engineering (diploma of three years) at the Polytechnic University of Madrid (Spain). They took part 132 students in the years 2006, 2007 and 2008. The exam had a common format, with three parts assessing skills in construction, machinery and electrical installations. The results showed the evolution in the training of students, and the relationship between skills acquired and late differences in the learning process. The most important conclusions were that the attainment levels was lower than expected, but generally consistent with the training received by each group of students. In particular, the low number of hours of subjects in electrical installations in certain groups of students was evident when evaluating the skills acquired. The results indicated that they aim to increase the number of hours in certain subjects and groups of students, if a graduate is to get qualified. The authors recommend an examination similar to the raised, integrator type, in all programs that do not have any overall final assessment in order to conduct a quality control of graduates; this approach has the advantage that graduates may also obtain an additional final certificate with their level of competences towards their future professional work.
Birnbaum, Dana Sophie; Braun, Sebastian
2010-01-01
Evaluation represents a substantial component of the concept of Disease Management Programmes. This and the fact that the implementation of Disease Management Programmes constitutes a major change in the German healthcare system require that the criteria established by the German Federal Social Insurance Authority (Bundesversicherungsamt) be carefully reviewed. The present paper focuses on the evaluation method and the economic data. The pre-/-post study design used in the evaluation is known to be vulnerable to threats to internal validity. The objective of this paper is to analyze whether these threats to internal validity which have been known theoretically are confirmed by the results of the final reports. A review of the final reports of health insurance companies like the AOK, Barmer and a group of the BKK in Westfalen-Lippe shows that this question can be answered in the affirmative. The pre-/-post design without control groups is unable to recognize the failure or success of the Disease Management concept. The reasons include a high drop-out rate as well as the lack of consideration of the characteristics of chronic disease. Hence the evaluation method has failed to prove the quality of Disease Management Programmes in Germany. This is why consistent further development is needed.
IRIS Toxicological Review of Ammonia Noncancer Inhalation ...
EPA has finalized the Integrated Risk Information System (IRIS) Assessment of Ammonia (Noncancer Inhalation). This assessment addresses the potential noncancer human health effects from long-term inhalation exposure to ammonia. Now final, this assessment will update the current toxicological information on ammonia posted in 1991. EPA’s program and regional offices may use this assessment to inform decisions to protect human health. EPA completed the Integrated Risk Information System (IRIS) health assessment for ammonia. IRIS is an EPA database containing Agency scientific positions on potential adverse human health effects that may result from chronic (or lifetime) exposure to chemicals in the environment. IRIS contains chemical-specific summaries of qualitative and quantitative health information in support of two steps of the risk assessment paradigm, i.e., hazard identification and dose-response evaluation. IRIS assessments are used in combination with specific situational exposure assessment information to evaluate potential public health risk associated with environmental contaminants.
NASA Astrophysics Data System (ADS)
Issa, S. M.; Shehhi, B. Al
2012-07-01
Landfill sites receive 92% of total annual solid waste produced by municipalities in the emirate of Abu Dhabi. In this study, candidate sites for an appropriate landfill location for the Abu Dhabi municipal area are determined by integrating geographic information systems (GIS) and multi-criteria evaluation (MCE) analysis. To identify appropriate landfill sites, eight input map layers including proximity to urban areas, proximity to wells and water table depth, geology and topography, proximity to touristic and archeological sites, distance from roads network, distance from drainage networks, and land slope are used in constraint mapping. A final map was generated which identified potential areas showing suitability for the location of the landfill site. Results revealed that 30% of the study area was identified as highly suitable, 25% as suitable, and 45% as unsuitable. The selection of the final landfill site, however, requires further field research.
Configuration study for a 30 GHz monolithic receive array, volume 1
NASA Technical Reports Server (NTRS)
Nester, W. H.; Cleaveland, B.; Edward, B.; Gotkis, S.; Hesserbacker, G.; Loh, J.; Mitchell, B.
1984-01-01
Gregorian, Cassegrain, and single reflector systems were analyzed in configuration studies for communications satellite receive antennas. Parametric design and performance curves were generated. A preliminary design of each reflector/feed system was derived including radiating elements, beam-former network, beamsteering system, and MMIC module architecture. Performance estimates and component requirements were developed for each design. A recommended design was selected for both the scanning beam and the fixed beam case. Detailed design and performance analysis results are presented for the selected Cassegrain configurations. The final design point is characterized in detail and performance measures evaluated in terms of gain, sidelobe level, noise figure, carrier-to-interference ratio, prime power, and beamsteering. The effects of mutual coupling and excitation errors (including phase and amplitude quantization errors) are evaluated. Mechanical assembly drawings are given for the final design point. Thermal design requirements are addressed in the mechanical design.
Promoting evaluation capacity building in a complex adaptive system.
Lawrenz, Frances; Kollmann, Elizabeth Kunz; King, Jean A; Bequette, Marjorie; Pattison, Scott; Nelson, Amy Grack; Cohn, Sarah; Cardiel, Christopher L B; Iacovelli, Stephanie; Eliou, Gayra Ostgaard; Goss, Juli; Causey, Lauren; Sinkey, Anne; Beyer, Marta; Francisco, Melanie
2018-04-10
This study provides results from an NSF funded, four year, case study about evaluation capacity building in a complex adaptive system, the Nanoscale Informal Science Education Network (NISE Net). The results of the Complex Adaptive Systems as a Model for Network Evaluations (CASNET) project indicate that complex adaptive system concepts help to explain evaluation capacity building in a network. The NISE Network was found to be a complex learning system that was supportive of evaluation capacity building through feedback loops that provided for information sharing and interaction. Participants in the system had different levels of and sources of evaluation knowledge. To be successful at building capacity, the system needed to have a balance between both centralized and decentralized control, coherence, redundancy, and diversity. Embeddedness of individuals within the system also provided support and moved the capacity of the system forward. Finally, success depended on attention being paid to the control of resources. Implications of these findings are discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.
Coffee with co-workers: role of caffeine on evaluations of the self and others in group settings.
Unnava, Vasu; Singh, Amit Surendra; Unnava, H Rao
2018-03-01
This research explores the effect of consuming a moderate amount of commercially available caffeinated coffee on an individual's self-evaluated participation in a group activity and subsequent evaluations of the experience. Across two studies, results show that consuming a moderate amount of caffeinated coffee prior to indulging in a group activity enhances an individual's task-relevant participation in the group activity. In addition, subjective evaluations of the participation of other group members and oneself are also positively influenced. Finally, the positive impact of consuming a moderate amount of caffeinated coffee on the evaluation of participation of other group members and oneself is moderated by a sense of an increased level of alertness.
Schrader, I; Wilk, D; Jansen, O; Riedel, C
2013-09-01
To evaluate how accurately final infarct volume in acute ischemic stroke can be predicted with perfusion CT (PCT) using a 64-MDCT unit and the toggling table technique. Retrospective analysis of 89 patients with acute ischemic stroke who underwent CCT, CT angiography (CTA) and PCT using the "toggling table" technique within the first three hours after symptom onset. In patients with successful thrombolytic therapy (n = 48) and in those without effective thrombolytic therapy (n = 41), the infarct volume and the volume of the penumbra on PCT were compared to the infarct size on follow-up images (CT or MRI) performed within 8 days. The feasibility of complete infarct volume prediction by 8 cm cranio-caudal coverage was evaluated. The correlation between the volume of hypoperfusion on PCT defined by cerebral blood volume reduction and final infarct volume was strongest in patients with successful thrombolytic therapy with underestimation of the definite infarct volume by 8.5 ml on average. The CBV map had the greatest prognostic value. In patients without successful thrombolytic therapy, the final infarct volume was overestimated by 12.1 ml compared to the MTT map on PCT. All infarcts were detected completely. There were no false-positive or false-negative results. Using PCT and the "toggling table" technique in acute stroke patients is helpful for the rapid and accurate quantification of the minimal final infarct and is therefore a prognostic parameter which has to be evaluated in further studies to assess its impact on therapeutic decision. ▶ Using PCT and the “toggling table technique” allows accurate quantification of the infarct core and penumbra. ▶ It is possible to record dynamic perfusion parameters quickly and easily of almost the entire supratentorial brain volume on a 64-slice MDCT unit. ▶ The technique allows identification of those patients who could profit from thrombolytic therapy outside the established time intervals. © Georg Thieme Verlag KG Stuttgart · New York.
NASA Technical Reports Server (NTRS)
Lee, R. E.
2017-01-01
Electrochemical and crevice corrosion laboratory test results are presented for three noble metal candidates with possible application on the Universal Waste Management System (UWMS) in support of the Environmental Control and Life Support System (ECLSS) aboard the International Space Station (ISS). The three metal candidates, which included Inconel 625, Hastelloy C276 and Titanium 6Al-4V, were evaluated in two solutions representative of the acidic pretreatment formulations utilized during processing of waste liquids within the ECLSS. Final test results and data analysis indicated that the passive layer on all three metals provides excellent corrosion protection in both solutions under standard test conditions.
Effectiveness of Shield Termination Techniques Tested with TEM Cell and Bulk Current Injection
NASA Technical Reports Server (NTRS)
Bradley, Arthur T.; Hare, Richard J.
2009-01-01
This paper presents experimental results of the effectiveness of various shield termination techniques. Each termination technique is evaluated by two independent noise injection methods; transverse electromagnetic (TEM) cell operated from 3 MHz 400 MHz, and bulk current injection (BCI) operated from 50 kHz 400 MHz. Both single carrier and broadband injection tests were investigated. Recommendations as to how to achieve the best shield transfer impedance (i.e. reduced coupled noise) are made based on the empirical data. Finally, the noise injection techniques themselves are indirectly evaluated by comparing the results obtained from the TEM Cell to those from BCI.
Cingolani, Diego; Eusebi, Anna Laura; Battistoni, Paolo
2017-12-01
The industrial processes require large quantities of water. The presence of discharges results not only in significant environmental impact but implies wastage of water resources. This problem could be solved treating and reusing the produced wastewaters and applying the new zero liquid discharge approach. This paper discusses the design and the performances of reverse osmosis membranes for the upgrading of full scale platform for industrial liquid wastes. The final effluent from the ultrafiltration unit of the full scale plant was monitored to design the reverse osmosis unit. Previous modelling phase was used to evaluate the specific ordinary and maintenance costs and the final effluent quality (2.7 €/m 3 ). The system was designed in triple stages at different operative pressures. The economic feasibility and the payback period of the technology at different percentages of produced permeate were determined. The recovery of 90% was identified as profitable for the reverse osmosis application. One experimental pilot plant applying the reverse osmosis was used to test the final effluent. Moreover, the same flow was treated with second pilot system based on the forward osmosis process. The final efficiencies were compared. Removals higher than 95% using the reverse system were obtained for the main macropollutants and ions. No sustainable applicability of the forward osmosis was determined. Copyright © 2016 Elsevier Ltd. All rights reserved.
Project Developmental Continuity Evaluation: Final Report. Appendices to Volume I.
ERIC Educational Resources Information Center
Bond, James T.; And Others
This document provides the appendices for volume 1 of the final evaluation report of Project Developmental Continuity (PDC), a Head Start demonstration project initiated in 1974 to develop program models which enhance children's social competence by fostering developmental continuity from preschool through the early elementary grades.…
75 FR 70304 - Advisory Committee on Reactor Safeguards
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-17
..., Rockville, Maryland. Thursday, December 2, 2010, Conference Room T2-B1, Two White Flint North, Rockville... opening remarks regarding the conduct of the meeting. 8:35 a.m.-10 a.m.: Final Safety Evaluation Report... Kewaunee, Inc., regarding the final safety evaluation report associated with the License Renewal...
Final Evaluation Report. 1976-1977. Title I Migrant Program. Publication Number: 76.59.
ERIC Educational Resources Information Center
Austin Independent School District, TX. Office of Research and Evaluation.
The final evaluation of the Elementary and Secondary Education Act Title I Migrant Program in the Austin, Texas Independent School District is reported. The program consisted of instructional, student recruitment, parental involvement, health services, and clothing components. The instructional component included programs for pre-kindergarten…
DOT National Transportation Integrated Search
1991-06-01
This report documents the construction, initial evaluation and final evaluation of several experimental features which were incorporated as part of an overlay of an existing PCC pavement in order to determine the feasibility of extending the asphalti...
EPA's Ecological Risk Assessment Support Center (ERASC) announced the release of the final report, Evaluating Potential Exposures to Ecological Receptors Due to Transport of Hydrophobic Organic Contaminants in Subsurface Systems. This technical paper recommends several ty...
EPA's Ecological Risk Assessment Support Center (ERASC) announced the release of the final report, Evaluating Ecological Risk to Invertebrate Receptors from PAHs in Sediments at Hazardous Waste Sites. The report provides an overview of an approach for assessing risk to ...
VI-G, Sec. 661, P.L. 91-230. Final Performance Report.
ERIC Educational Resources Information Center
1976
Presented is the final performance report of the CSDC model which is designed to provide services for learning disabled high school students. Sections cover the following program aspects: organizational structure, inservice sessions, identification of students, materials and equipment, evaluation of student performance, evaluation of the model,…
Special Education Evaluation Project for University Affiliated Facilities. Final Report.
ERIC Educational Resources Information Center
Burrello, Leonard C.; And Others
The final report of the Special Education Evaluation Project for 16 University Affiliated Facilities (UAF) centers provides a chronological review of the project which focused on the training of persons to work with mentally retarded or other handicapped individuals. Outlined are project objectives including the development of descriptors useful…
TADS Final Evaluation Report, 1980-81. Appendix S.
ERIC Educational Resources Information Center
Suarez, Tanya M.; And Others
The document contains the final report of the Technical Assistance Development System (TADS), a program which provided technical assistance (TA) services to 53 Handicapped Children's Early Education Program (HCEEP) demonstration projects and 13 State Implementation Grants (SIGs). The evaluation report is divided into five sections. Section 1…
Evaluation of Subcontract Price Proposals
1990-04-09
This is the final report on the Audit of the Evaluation of Subcontract Price Proposals. Comments on a draft of this report were considered in...preparing the final report. We made the audit from October 1987 through May 198% The initial objectives of the audit were to evaluate procedures used by...assist audit reports were used by procurement contracting officers in negotiating contract prices. During the audit , we expanded our objectives to
ERIC Educational Resources Information Center
Foley, Eileen M.; Klinge, Allan; Reisner, Elizabeth R.
2007-01-01
The evaluation of the New Century High Schools (NCHS) initiative examined operations and student outcomes in 75 schools from 2002-2003 through 2005-2006. This report, the final in a series of annual evaluation reports, presents data collected over those years, with a focus on school year 2005-2006. The NCHS initiative grew out of a program theory…
Tefertiller, Candy; Hays, Kaitlin; Jones, Janell; Jayaraman, Arun; Hartigan, Clare; Bushnik, Tamara; Forrest, Gail F
2018-01-01
Objective: To assess safety and mobility outcomes utilizing the Indego powered exoskeleton in indoor and outdoor walking conditions with individuals previously diagnosed with a spinal cord injury (SCI). Methods: We conducted a multicenter prospective observational cohort study in outpatient clinics associated with 5 rehabilitation hospitals. A convenience sample of nonambulatory individuals with SCI ( N = 32) completed an 8-week training protocol consisting of walking training 3 times per week utilizing the Indego powered exoskeleton in indoor and outdoor conditions. Participants were also trained in donning/doffing the exoskeleton during each session. Safety measures such as adverse events (AEs) were monitored and reported. Time and independence with donning/doffing the exoskeleton as well as walking outcomes to include the 10-meter walk test (10MWT), 6-minute walk test (6MWT), Timed Up & Go test (TUG), and 600-meter walk test were evaluated from midpoint to final evaluations. Results: All 32 participants completed the training protocol with limited device-related AEs, which resulted in no interruption in training. The majority of participants in this trial were able to don and doff the Indego independently. Final walking speed ranged from 0.19 to 0.55 m/s. Final average indoor and outdoor walking speeds among all participants were 0.37 m/s ( SD = 0.08, 0.09, respectively), after 8 weeks of training. Significant ( p < .05) improvements were noted between midpoint and final gait speeds in both indoor and outdoor conditions. Average walking endurance also improved among participants after training. Conclusion: The Indego was shown to be safe for providing upright mobility to 32 individuals with SCIs who were nonambulatory. Improvements in speed and independence were noted with walking in indoor and outdoor conditions as well as with donning/doffing the exoskeleton.
Estimation of Particulate Mass and Manganese Exposure Levels among Welders
Hobson, Angela; Seixas, Noah; Sterling, David; Racette, Brad A.
2011-01-01
Background: Welders are frequently exposed to Manganese (Mn), which may increase the risk of neurological impairment. Historical exposure estimates for welding-exposed workers are needed for epidemiological studies evaluating the relationship between welding and neurological or other health outcomes. The objective of this study was to develop and validate a multivariate model to estimate quantitative levels of welding fume exposures based on welding particulate mass and Mn concentrations reported in the published literature. Methods: Articles that described welding particulate and Mn exposures during field welding activities were identified through a comprehensive literature search. Summary measures of exposure and related determinants such as year of sampling, welding process performed, type of ventilation used, degree of enclosure, base metal, and location of sampling filter were extracted from each article. The natural log of the reported arithmetic mean exposure level was used as the dependent variable in model building, while the independent variables included the exposure determinants. Cross-validation was performed to aid in model selection and to evaluate the generalizability of the models. Results: A total of 33 particulate and 27 Mn means were included in the regression analysis. The final model explained 76% of the variability in the mean exposures and included welding process and degree of enclosure as predictors. There was very little change in the explained variability and root mean squared error between the final model and its cross-validation model indicating the final model is robust given the available data. Conclusions: This model may be improved with more detailed exposure determinants; however, the relatively large amount of variance explained by the final model along with the positive generalizability results of the cross-validation increases the confidence that the estimates derived from this model can be used for estimating welder exposures in absence of individual measurement data. PMID:20870928
NASA Astrophysics Data System (ADS)
Lv, Z. H.; Li, Q.; Huang, R. W.; Liu, H. M.; Liu, D.
2016-08-01
Based on the discussion about topology structure of integrated distributed photovoltaic (PV) power generation system and energy storage (ES) in single or mixed type, this paper focuses on analyzing grid-connected performance of integrated distributed photovoltaic and energy storage (PV-ES) systems, and proposes a comprehensive evaluation index system. Then a multi-level fuzzy comprehensive evaluation method based on grey correlation degree is proposed, and the calculations for weight matrix and fuzzy matrix are presented step by step. Finally, a distributed integrated PV-ES power generation system connected to a 380 V low voltage distribution network is taken as the example, and some suggestions are made based on the evaluation results.
Carranza Lira, Sebastián; Arce Herrera, Rosa María; González González, Patricia
2007-11-01
The educative models and strategies to achieve a significant learning have a wide variety. The development of clinical aptitude for clinical research papers lecture has an important place to maintain the physician actualized and for resident formation. To evaluate the degree of development of the aptitude for the reading of clinical research articles in 2nd grade residents of the gynecology and obstetrics speciality alter an educative strategy. In 16 2nd year gynecology and obstetrics residents, a previously validated instrument was applied for the evaluation of critical lecture of clinical research articles in general medicine previous and after and educative strategy. Statistical analysis was with Kruskal-Wallis analysis of variance. Also Wilcoxon test was used to assess the differences between baseline and final results. The median of age was 27 (24-31) years, gender 56.3% women and 43.8% men. A statistically significant increase in global score was observed after the educative strategy. After it only there was a significant increase in the indicator to interpret. After evaluating the domain degrees according to the indicator to interpret, in baseline evaluation it predominated the very low level and at the final evaluation the very low and low levels. In the indicator to judge at baseline the majority were in the very low level, and at the end in very low and low levels. According to the indicator to propose at baseline all were in the level expected by hazard, and at the end a minimal proportion was at very low level. These results traduce a discrete improvement in critical lecture process, which makes to consider the educative strategy that was used, since the objective to improve critical lecture capacity was not achieved.
Saraf, Prahlad A; Kamat, Sharad; Puranik, R S; Puranik, Surekha; Saraf, Suma P; Singh, Bhanu Pratap
2014-01-01
Background and Aim: Periapical lesions often present differently on the radiograph resulting in a dilemma in the mind of the dentist to arrive at a final diagnosis. Although, histopathologic diagnosis has been used for confirmation of the true nature of periapical lesion, the concept of transformation of periapical granulomas containing epithelium without cystification into cyst remains controversial. The aim of this in vivo study was to evaluate the efficacy of conventional radiography and histopathology in differentiating periapical lesions in adjunct with immunohistochemical analysis. Aim: Periapical lesions often present differently on the radiograph resulting in a dilemma in the mind of the dentist to arrive at a final diagnosis. Although, histopathologic diagnosis has been used for confirmation of the true nature of periapical lesion, the concept of transformation of periapical granulomas containing epithelium without cystification into cyst remains controversial. The aim of this in vivo study was to evaluate the efficacy of conventional radiography and histopathology in differentiating periapical lesions in adjunct with immunohistochemical analysis. Materials and Method: Thirty patients having large periapical radiolucency that do not heal successfully with routine endodontic therapy in relation to either maxillary or mandibular anterior teeth were selected for the study. Intraoral periapical radiographs were obtained and provisional diagnosis of the apical areas were made. Endodontic surgery was performed to enable histopathogical investigation. The histopathological interpretation was done to arrive at a final diagnosis and selected questionable granulomas were subjected for cytokeratin (CK-14) stain. Results: The histopathological profile of lesions consisted of 66.66% periapical granulomas, 10% cysts, 6.67% abscess and 16.67% granulomas with cystic potential. The radiographic and histopathologic correlation was found in only 30% of these cases. Strong CK-14 expression was observed in all five cases of periapical granuloma with cystic potential. Conclusion: The radiographic diagnosis of periapical lesions remains inconclusive. Although histopathologic examination of periapical lesions gives true nature, the precise nature of subsets of periapical granulomas may be achieved with adjunct use of immunohistochemical markers. PMID:24778515
Berendonk, Christoph; Schirlo, Christian; Balestra, Gianmarco; Bonvin, Raphael; Feller, Sabine; Huber, Philippe; Jünger, Ernst; Monti, Matteo; Schnabel, Kai; Beyeler, Christine; Guttormsen, Sissel; Huwendiek, Sören
2015-01-01
Objective: Since 2011, the new national final examination in human medicine has been implemented in Switzerland, with a structured clinical-practical part in the OSCE format. From the perspective of the national Working Group, the current article describes the essential steps in the development, implementation and evaluation of the Federal Licensing Examination Clinical Skills (FLE CS) as well as the applied quality assurance measures. Finally, central insights gained from the last years are presented. Methods: Based on the principles of action research, the FLE CS is in a constant state of further development. On the foundation of systematically documented experiences from previous years, in the Working Group, unresolved questions are discussed and resulting solution approaches are substantiated (planning), implemented in the examination (implementation) and subsequently evaluated (reflection). The presented results are the product of this iterative procedure. Results: The FLE CS is created by experts from all faculties and subject areas in a multistage process. The examination is administered in German and French on a decentralised basis and consists of twelve interdisciplinary stations per candidate. As important quality assurance measures, the national Review Board (content validation) and the meetings of the standardised patient trainers (standardisation) have proven worthwhile. The statistical analyses show good measurement reliability and support the construct validity of the examination. Among the central insights of the past years, it has been established that the consistent implementation of the principles of action research contributes to the successful further development of the examination. Conclusion: The centrally coordinated, collaborative-iterative process, incorporating experts from all faculties, makes a fundamental contribution to the quality of the FLE CS. The processes and insights presented here can be useful for others planning a similar undertaking. PMID:26483853
Bae, Kyu Hwan; Kim, Jeong Woo; Kim, Tae Kyun; Kweon, Seok Hyun; Kang, Hong Je; Kim, Jong Yun; Joo, Min Su; Kim, Dong Moon
2016-09-01
We aimed to identify the clinical and structural outcomes after arthroscopic repair of full-thickness rotator cuff tears of all sizes with a modified tension band suture technique. Among 63 patients who underwent arthroscopic rotator cuff repair for a full-thickness rotator cuff tear with the modified tension band suture technique at a single hospital between July 2011 and March 2013, 47 were enrolled in this study. The mean follow-up period was 29 months. Visual analog scale scores, range of motion, American Shoulder and Elbow Surgeons scores, Constant scores, and Shoulder Strength Index were measured preoperatively and at the final follow-up. For radiologic evaluation, we conducted magnetic resonance imaging 6 months postoperatively and ultrasonography at the final follow-up. We allocated the small and medium tears to group A and the large and massive tears to group B and then compared clinical outcomes and repair integrity. Postoperative clinical outcomes at the final follow-up showed significant improvements compared with those seen during preoperative evaluations (P < .001). However, group B showed worse clinical results than group A. Evaluation with magnetic resonance imaging performed 6 months postoperatively and ultrasonography taken at the final follow-up revealed that group B showed a significantly higher retear rate than did group A (69% vs. 6%, respectively; P < .001). Arthroscopic repair with the modified tension band suture technique for rotator cuff tears was a more suitable method for small to medium tears than for large to massive tears. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.
CAPACITY BUILDING PROCESS IN ENVIRONMENTAL AND HEALTH IMPACT ASSESSMENT FOR A THAI COMMUNITY.
Chaithui, Suthat; Sithisarankul, Pornchai; Hengpraprom, Sarunya
2017-03-01
This research aimed at exploring the development of the capacitybuilding process in environmental and health impact assessment, including the consideration of subsequent, capacity-building achievements. Data were gathered through questionnaires, participatory observations, in-depth interviews, focus group discussions, and capacity building checklist forms. These data were analyzed using content analysis, descriptive statistics, and inferential statistics. Our study used the components of the final draft for capacity-building processes consisting of ten steps that were formulated by synthesis from each respective process. Additionally, the evaluation of capacity building levels was performed using 10-item evaluation criteria for nine communities. The results indicated that the communities performed well under these criteria. Finally, exploration of the factors influencing capacity building in environmental and health impact assessment indicated that the learning of community members by knowledge exchange via activities and study visits were the most influential factors of the capacity building processes in environmental and health impact assessment. The final revised version of capacitybuilding process in environmental and health impact assessment could serve as a basis for the consideration of interventions in similar areas, so that they increased capacity in environmental and health impact assessments.
Mathew, S N; Field, W E; French, B F
2011-07-01
This article reports the use of an expert panel to perform content validation of an experimental assessment process for the safety of assistive technology (AT) adopted by farmers with disabilities. The validation process was conducted by a panel of six experts experienced in the subject matter, i.e., design, use, and assessment of AT for farmers with disabilities. The exercise included an evaluation session and two focus group sessions. The evaluation session consisted of using the assessment process under consideration by the panel to evaluate a set of nine ATs fabricated by a farmer on his farm site. The expert panel also participated in the focus group sessions conducted immediately before and after the evaluation session. The resulting data were analyzed using discursive analysis, and the results were incorporated into the final assessment process. The method and the results are presented with recommendations for the use of expert panels in research projects and validation of assessment tools.
Two-year clinical evaluation of Cerec 3D ceramic inlays inserted by undergraduate dental students.
Wrbas, Karl-Thomas; Hein, Nicole; Schirrmeister, Jörg Fabian; Altenburger, Markus Jörg; Hellwig, Elmar
2007-01-01
To evaluate the clinical results of final-year dental students' clinical performance after a practical computer-based course and training in the new Cerec 3 method. Cerec 3D restorations (Sirona) were made and inserted in patients by 50 dental students. The students were in their final semester in the Department of Operative Dentistry. Before treatment of the patients began, the students had undergone computer-based Cerec 3D training. The training included lessons comprising the whole Cerec procedure from planning to insertion of the restoration. Vital permanent premolars or molars requiring a 2- or 3-surface restoration were selected for the study. The evaluation started 1 week after luting. The inlays were examined in accordance with the US Public Health Service (USPHS) criteria at baseline and after 6, 12, and 24 months. The 2-year survival rate of the restorations was estimated to be 93.3% according to Kaplan-Meier. No statistically significant changes were observed in color match, surface texture, and anatomic form. The decrease of pulpal hypersensitivity during the observation period was statistically significant (P <.05). Dental students are capable of delivering demanding clinical tasks after appropriate training. The introduction of CAD/CAM restorations to the dental curriculum resulted in high short-term success rates. Further investigations are required to evaluate the long-term success of those restorations. To achieve a clinically adequate performance, it is necessary to consider the basic rules and technology associated with ceramic restorations.
Threatt, Anthony L; Merino, Jessica; Brooks, Johnell O; Healy, Stan; Truesdail, Constance; Manganelli, Joseph; Walker, Ian; Green, Keith Evan
2017-04-01
This article presents the results of an exploratory study in which 14 healthcare subject matter experts (H-SMEs) in addition to four research and design subject matter experts (RD-SMEs) at a regional rehabilitation hospital engaged in a series of complementary, participatory activities in order to design an assistive robotic table (ART). As designers, human factor experts, and healthcare professionals continue to work to integrate assistive human-robot technologies in healthcare, it is imperative to understand how the technology affects patient care from clinicians' perspectives. Fourteen clinical H-SMEs rated a subset of conceptual ART design ideas; participated in the iterative design process of ART; and evaluated a final cardboard prototype, the rehabilitation hospital's current over-the-bed table (OBT), an ART built with true materials, and two therapy surface prototypes. Four RD-SMEs conducted a heuristic evaluation on the ART built with true materials. Data were analyzed by frequency and content analysis. The results include a design and prototype for the next generation ART and a pneumatically controlled therapy surface, a broadened list of specifications for the future design and implementation of assistive robotic furniture, and final observations. When compared to the rehabilitation hospital's current OBT, the developed ART in this study was successful. Designing novel features is dependent upon ensuring patient safety. The inclusion of clinicians in the participatory iterative design and evaluation process and the use of personas provided a broadened list of specifications for the successful implementation of assistive robotic furniture.
NASA Astrophysics Data System (ADS)
Rubeaux, Mathieu; Simon, Antoine; Gnep, Khemara; Colliaux, Jérémy; Acosta, Oscar; de Crevoisier, Renaud; Haigron, Pascal
2013-03-01
Image-Guided Radiation Therapy (IGRT) aims at increasing the precision of radiation dose delivery. In the context of prostate cancer, a planning Computed Tomography (CT) image with manually defined prostate and organs at risk (OAR) delineations is usually associated with daily Cone Beam Computed Tomography (CBCT) follow-up images. The CBCT images allow to visualize the prostate position and to reposition the patient accordingly. They also should be used to evaluate the dose received by the organs at each fraction of the treatment. To do so, the first step is a prostate and OAR segmentation on the daily CBCTs, which is very timeconsuming. To simplify this task, CT to CBCT non-rigid registration could be used in order to propagate the original CT delineations in the CBCT images. For this aim, we compared several non-rigid registration methods. They are all based on the Mutual Information (MI) similarity measure, and use a BSpline transformation model. But we add different constraints to this global scheme in order to evaluate their impact on the final results. These algorithms are investigated on two real datasets, representing a total of 70 CBCT on which a reference delineation has been realized. The evaluation is led using the Dice Similarity Coefficient (DSC) as a quality criteria. The experiments show that a rigid penalty term on the bones improves the final registration result, providing high quality propagated delineations.
Dias, Heidy Q; Sukumaran, Soniya; Srinivas, Tatiparthi; Mulik, Jyoti
2018-05-30
The use of biotic indices has garnered attention during the last decade due to its extensive application in evaluating ecological quality status (EcoQS) of marine waters and estuaries. Three seasonal surveys were conducted in the Kundalika estuary, India to evaluate the ecostatus using five benthic indices and comparing their effectiveness considering the estuarine salinity gradient and seasonality. All indices gave divergent results displaying a wide range of classes (good to bad) across salinity zones and seasons. Comparatively, M-AMBI discriminated the EcoQS suitably than other indices. Hence, a seasonally averaged approach for M-AMBI was proposed to obtain a final mean EcoQS which assigned moderate status to the euhaline and poly-mesohaline zones and poor status to the oligohaline zone. Considering the high degree of spatial heterogeneity and seasonality in the estuary, the monsoon data was found to lower the EcoQS due to natural stress in some cases; the exclusion of the monsoon season resulted in a more valid ecostatus. Therefore, this approach which combines information from the non-monsoon seasons stands out in providing a useful basis for ecological management by scrutinizing responses of macrobenthos. Also, we suggest salinity zone-wise evaluation for more effective classification chiefly in tropical monsoonal estuaries. An effort to establish a final EcoQS was performed; however, future in-depth studies are necessary to ascertain the reliability of the successful biotic index (M-AMBI) in estuaries with different stressors.
Stakeholder-focused evaluation of an online course for health care providers.
Dunet, Diane O; Reyes, Michele
2006-01-01
Different people who have a stake or interest in a training course (stakeholders) may have markedly different definitions of what constitutes "training success" and how they will use evaluation results. Stakeholders at multiple levels within and outside of the organization guided the development of an evaluation plan for a Web-based training course on hemochromatosis. Stakeholder interests and values were reflected in the type, level, and rigor of evaluation methods selected. Our mixed-method evaluation design emphasized small sample sizes and repeated measures. Limited resources for evaluation were leveraged by focusing on the data needs of key stakeholders, understanding how they wanted to use evaluation results, and collecting data needed for stakeholder decision making. Regular feedback to key stakeholders provided opportunities for updating the course evaluation plan to meet emerging needs for new or different information. Early and repeated involvement of stakeholders in the evaluation process also helped build support for the final product. Involving patient advocacy groups, managers, and representative course participants improved the course and enhanced product dissemination. For training courses, evaluation planning is an opportunity to tailor methods and data collection to meet the information needs of particular stakeholders. Rigorous evaluation research of every training course may be infeasible or unwarranted; however, course evaluations can be improved by good planning. A stakeholder-focused approach can build a picture of the results and impact of training while fostering the practical use of evaluation data.
Training evaluation final report
NASA Technical Reports Server (NTRS)
Sepulveda, Jose A.
1992-01-01
In the area of management training, 'evaluation' refers both to the specific evaluation instrument used to determine whether a training effort was considered effective, and to the procedures followed to evaluate specific training requests. This report recommends to evaluate new training requests in the same way new procurement or new projects are evaluated. This includes examining training requests from the perspective of KSC goals and objectives, and determining expected ROI of proposed training program (does training result in improved productivity, through savings of time, improved outputs, and/or personnel reduction?). To determine whether a specific training course is effective, a statement of what constitutes 'good performance' is required. The user (NOT the Training Branch) must define what is 'required level of performance'. This 'model' will be the basis for the design and development of an objective, performance-based, training evaluation instrument.
Liinamo, A E; Karjalainen, L; Ojala, M; Vilva, V
1997-03-01
Data from field trials of Finnish Hounds between 1988 and 1992 in Finland were used to estimate genetic parameters and environmental effects for measures of hunting performance using REML procedures and an animal model. The original data set included 28,791 field trial records from 5,666 dogs. Males and females had equal hunting performance, whereas experience acquired by age improved trial results compared with results for young dogs (P < .001). Results were mostly better on snow than on bare ground (P < .001), and testing areas, years, months, and their interactions affected results (P < .001). Estimates of heritabilities and repeatabilities were low for most of the 28 measures, mainly due to large residual variances. The highest heritabilities were for frequency of tonguing (h2 = .15), pursuit score (h2 = .13), tongue score (h2 = .13), ghost trailing score (h2 = .12), and merit and final score (both h2 = .11). Estimates of phenotypic and genetic correlations were positive and moderate or high for search scores, pursuit scores, and final scores but lower for other studied measures. The results suggest that, due to low heritabilities, evaluation of breeding values for Finnish Hounds with respect to their hunting ability should be based on animal model BLUP methods instead of mere performance testing. The evaluation system of field trials should also be revised for more reliability.
1988-03-01
Polyimides as Planarizing and Insulative Coatings 2-21 III. Experimental Procedure, Equipment, and Materials 3-1 Wet Orientation Dependent Etching Study 3...1 Die Bond Adhesives Study .3-7 Fabrication of Samples for Electrical Testing 3-21 Evaluation of the Final Samples 3-45 IV. Experimental Results and...Discussion .. 4-1 We :ientation Dependent Etching Study Results 4-1 Die Attach Adhesives Study Results 4-21 Fabrication of Samples for Electrical
DOE Office of Scientific and Technical Information (OSTI.GOV)
Johnson, N.; Davis, S.
1979-07-01
Performance and handling tests on the Calspan RSV were performed in Italy by the Istituto Sperimentale Auto E Motori (ISAM) and in West Germany by Volkswagenwerk AG Wolfsburg. The ISAM tests evaluated the Calspan RSV in the areas of fuel economy, vehicle response, braking and handling, and driver environment. The Volkswagen tests evaluated the Calspan RSV in the areas of braking, steering, handling, and overturning immunity. The ISAM tests are unlike any previously used to evaluate American vehicles. Therefore, the Calspan RSV results are compared to those of ten European cars which had undergone identical tests. The Volkswagen test proceduresmore » were identical to those specified in the Research Safety Vehicle program. The Calspan RSV results are compared to the RSV specifications for these tests.« less
Study on loading path optimization of internal high pressure forming process
NASA Astrophysics Data System (ADS)
Jiang, Shufeng; Zhu, Hengda; Gao, Fusheng
2017-09-01
In the process of internal high pressure forming, there is no formula to describe the process parameters and forming results. The article use numerical simulation to obtain several input parameters and corresponding output result, use the BP neural network to found their mapping relationship, and with weighted summing method make each evaluating parameters to set up a formula which can evaluate quality. Then put the training BP neural network into the particle swarm optimization, and take the evaluating formula of the quality as adapting formula of particle swarm optimization, finally do the optimization and research at the range of each parameters. The results show that the parameters obtained by the BP neural network algorithm and the particle swarm optimization algorithm can meet the practical requirements. The method can solve the optimization of the process parameters in the internal high pressure forming process.
Camargo, Jorge E.
2017-01-01
Abstract Propagation of political ideologies in social networks has shown a substantial impact on voting behavior. Both the contents of the messages (the ideology) and the politicians' influence on their online audiences (their followers) have been associated with such an impact. In this study we evaluate which of these factors exerted a major role in deciding electoral results of the 2015 Colombian regional elections by evaluating the linguistic similarity of political ideologies and their influence on the Twitter sphere. The electoral results proved to be strongly associated with tweets and retweets and not with the linguistic content of their ideologies or politicians' followers in Twitter. Finally, suggestions for new ways to analyze electoral processes are discussed. PMID:28080152
Correa, Juan C; Camargo, Jorge E
2017-01-01
Propagation of political ideologies in social networks has shown a substantial impact on voting behavior. Both the contents of the messages (the ideology) and the politicians' influence on their online audiences (their followers) have been associated with such an impact. In this study we evaluate which of these factors exerted a major role in deciding electoral results of the 2015 Colombian regional elections by evaluating the linguistic similarity of political ideologies and their influence on the Twitter sphere. The electoral results proved to be strongly associated with tweets and retweets and not with the linguistic content of their ideologies or politicians' followers in Twitter. Finally, suggestions for new ways to analyze electoral processes are discussed.
MAC Europe 1991 campaign: AIRSAR/AVIRIS data integration for agricultural test site classification
NASA Technical Reports Server (NTRS)
Sangiovanni, S.; Buongiorno, M. F.; Ferrarini, M.; Fiumara, A.
1993-01-01
During summer 1991, multi-sensor data were acquired over the Italian test site 'Otrepo Pavese', an agricultural flat area in Northern Italy. This area has been the Telespazio pilot test site for experimental activities related to agriculture applications. The aim of the investigation described in the following paper is to assess the amount of information contained in the AIRSAR (Airborne Synthetic Aperture Radar) and AVIRIS (Airborne Visible/Infrared Imaging Spectrometer) data, and to evaluate classification results obtained from each sensor data separately and from the combined dataset. All classifications are examined by means of the resulting confusion matrices and Khat coefficients. Improvements of the classification results obtained by using the integrated dataset are finally evaluated.
Shell Martinez Refinery, Martinez, CA: Consent Agreement and Final Order
Final executed Consent Agreement and Final Order (CA/FO) negotiated between EPA Region 9, and Shell Oil Products US relating to violations discovered during routine compliance evaluation inspections at the Shell Martinez Refinery in Martinez, California.
Soror, Tamer; Kovács, György; Seibold, Nina; Melchert, Corinna; Baumann, Kristin; Wenzel, Eike; Stojanovic-Rundic, Suzana
2017-05-01
Patients with early-stage breast cancer can benefit from adjuvant accelerated partial breast irradiation (APBI) following breast-conserving surgery (BCS). This work reports on cosmetic results following APBI using multicatheter high-dose-rate interstitial brachytherapy (HDR-IBT). Between 2006 and 2014, 114 patients received adjuvant APBI using multicatheter HDR-IBT. For each patient, two photographs were analyzed: the first was taken after surgery (baseline image) and the second at the last follow-up visit. Cosmesis was assessed by a multigender multidisciplinary team using the Harvard Breast Cosmesis Scale. Dose-volume histogram (DVH) parameters and the observed cosmetic results were investigated for potential correlations. The median follow-up period was 3.5 years (range 0.6-8.5 years). The final cosmetic scores were 30% excellent, 52% good, 14.5% fair, and 3.5% poor. Comparing the baseline and follow-up photographs, 59.6% of patients had the same score, 36% had a better final score, and 4.4% had a worse final score. Only lower target dose nonuniformity ratio (DNR) values (0.3 vs. 0.26; p = 0.009) were significantly associated with improved cosmetic outcome vs. same/worse cosmesis. APBI using multicatheter HDR-IBT adjuvant to BCS results in favorable final cosmesis. Deterioration in breast cosmesis occurs in less than 5% of patients. The final breast cosmetic outcome in patients treated with BCS and APBI using multicatheter HDR-IBT is influenced primarily by the cosmetic result of the surgery. A lower DNR value is significantly associated with a better cosmetic outcome.
NASA Astrophysics Data System (ADS)
Becerra, Luis Omar
2009-01-01
This SIM comparison on the calibration of high accuracy hydrometers was carried out within fourteen laboratories in the density range from 600 kg/m3 to 1300 kg/m3 in order to evaluate the degree of equivalence among participant laboratories. This key comparison anticipates the planned key comparison CCM.D-K4, and is intended to be linked with CCM.D-K4 when results are available. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).
ERIC Educational Resources Information Center
Wacker, Sally; And Others
The second of two volumes, this document continues the final evaluation report of Project Developmental Continuity (PDC), a Head Start demonstration project initiated in 1974 to develop program models which enhance children's social competence by fostering developmental continuity from preschool through the early elementary grades. In particular,…
The Clinical Teacher for Special Education. Final Report: Volume II; Evaluating the Model.
ERIC Educational Resources Information Center
Schwartz, Louis; Oseroff, Andrew
Effectiveness of the clinical teaching model (CTM) developed at Florida State University is documented in Volume II of the project's final report. Reviewed is literature related to teacher effectiveness and conceptual changes, conceptual models and instructional systems, and evaluation research in education. Research design and procedures are…
ERIC Educational Resources Information Center
Lamont, Ann; Fowler, Clifford F.
Two 1980 surveys of school staff, team member interviews, and examination of project films and documents supplied information for final evaluation of the ROCTAPUS (Really Outstanding Color Television About Practically Unlimited Subjects) program, a closed-circuit, magazine format, videotaped, television series intended to enrich the experiential…
Head Start/EPSDT Collaboration Evaluation. Final Report.
ERIC Educational Resources Information Center
Boone, Young and Associates, Inc., New York, NY.
This is the final report on the first year evaluation of the Head Start/Medicaid Early and Periodic Screening, Diagnosis and Treatment (EPSDT) Collaborative Effort, a demonstration program that was initiated by the Office of Child Development OCD/HEW in 1974. In initiating the program, OCD/HEW set forth the following objectives: (1) to assess the…
EPA announced the availability of the final report, An Assessment of Decision-Making Processes: Evaluation of Where Land Protection Planning Can Incorporate Climate Change Information. This report is a review of decision-making processes of selected land protection prog...
DOT National Transportation Integrated Search
2006-11-01
The US 93 reconstruction project on the Flathead Indian Reservation in northwest Montana represents one of the most extensive wildlife-sensitive highway design efforts to occur in the continental United States. The reconstruction will include install...
Evaluation of the Rural Math Excel Partnership Project Final Report
ERIC Educational Resources Information Center
Nagle, Katherine; Pratt-Williams, Jaunelle; Schmidt, Rebecca; Swantek, Cara; Lyulchenko, Marianna; McGhee, Raymond
2016-01-01
This is the final external evaluation report prepared by SRI International for the Rural Math Excel Partnership (RMEP) project, an investing in innovation (i3) development project funded by the U.S. Department of Education. Operated by Virginia Advanced Study Strategies, Inc. (VASS), the RMEP project included six rural school districts (LEAs) in…
Entrepreneurship Education in the Arab States. Final Evaluation Report
ERIC Educational Resources Information Center
Lamloumi, Jilani
2013-01-01
The report involves the findings of the final evaluation of the regional entrepreneurship education project in Arab States component II (2011-2012) (see ED560497), which is a joint activity between UNESCO and StratREAL Foundation. It aims to help the development of educational policies enabling the integration of entrepreneurship education within…
Evaluation of Learning Money Matters (LMM). Final Report
ERIC Educational Resources Information Center
Spielhofer, Thomas; Kerr, David; Gardiner, Clare
2009-01-01
This report presents the final findings of research carried out by the National Foundation for Educational Research (NFER), as part of an independent evaluation on behalf of pfeg, of the Learning Money Matters (LMM) initiative. LMM provides help, support and advice for secondary schools in delivering personal finance education (PFE) to their…
Final Pilot Performance Rating Scales.
ERIC Educational Resources Information Center
Horner, Walter R.; And Others
These rating scales are intended for evaluation of student pilot performance. Each student is evaluated individually on the basis of video recordings of the student in flight. Ten point rating lines are used for the ten criterion performance elements of each of three maneuvers, (1) Final Turn to Landing, (2) Lazy Eight, and (3) Vertical S "A".…
Boys and Girls Clubs in Public Housing. Final Research Report.
ERIC Educational Resources Information Center
Pope, Carl E.; And Others
This report presents findings and recommendations resulting from the evaluation of programs implemented in 15 cities by the Boys and Girls Clubs of America. These programs were implemented to distribute variations on the "Weed and Seed" program and its provision of crime and drug prevention programs. The overall goal of Weed and Seed was…
Wood Removals and Timber Use in New York, 1993
Eric H. Wharton; Thomas D. Martin; Richard H. Widmann; Richard H. Widmann
1998-01-01
Evaluates removals and timber output of New York. Results are based on survey of primary processing mills located in the state and of mills in other states that used wood from New York. Incorporates additional studies conducted during standard statewide forest inventories. Contains statistics of industrial roundwood production and the production and final end use of...
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1983-08-01
The report includes the analysis of the energy use patterns at the base and the identification and evaluation of energy conservation opportunities. The obtained results indicate that AMMRC energy use can potentially be reduced 42 percent by FY 1985, compared to the FY 1975 energy use baseline.
Ralphs Grocery EC-Diesel Truck Fleet: Final Results
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
2003-02-01
DOE's Office of Heavy Vehicle Technologies sponsored a research project with Ralphs Grocery Company to collect and analyze data on the performance and operation of 15 diesel trucks fueled with EC-Diesel in commercial service. These trucks were compared to 5 diesel trucks fueled with CARB diesel and operating on similar routes. This document reports this evaluation.
Joint Live Fire (JLF) Final Report for Instrumentation for Local Accelerative Loading
2016-07-22
Comparison with Pretest Prediction ................................................................................... 60 d. Lessons Learned...test designs and results prior to full-scale testing. Correlating simulation to test data can aid in increasing confidence in the models to further...test and test-to-simulation with the current instrumentation used during testing. Recent advances in accelerometer design must be evaluated and
COMPARATIVE EVALUATION OF R3f GARNET BEAD FILTRATION AND MULTIMEDIA FILTRATION SYSTEMS; FINAL REPORT
This report summarizes the results of tests conducted to date at the EPA T&E Facility on the R3f filtration system utilizing fine beads (such as garnet beads or glass beads) and a conventional multimedia filtration system. Both systems have been designed and built by Enprotec, a...
The purpose of this July 2012 economic impact analysis (EIA) is to present the results of the Agency’s evaluation of the cost, economic impacts, and benefits from compliance with the requirements of these Maximum Achievable Control Technologies (MACT).
ERIC Educational Resources Information Center
Bunderson, C. Victor; And Others
This report summarizes the results of a 22-month proof-of-concept demonstration of a class of interactive videodisc systems, which involved the use of an intelligent videodisc in developmental biology instruction at the undergraduate level. The study involved the development of hardware, software, courseware, and instructional strategies for…
ERIC Educational Resources Information Center
Harte, Wendy; Reitano, Paul
2016-01-01
The assessment task of the final course in a bachelor of secondary education program is examined for opportunities for preservice geography teachers to achieve the course aims of integrating, consolidating, applying, and reflecting on the knowledge and skills they have learned during their initial teacher education program. The results show that…
Spectral contents readout of birefringent sensor
NASA Technical Reports Server (NTRS)
Redner, Alex S.
1989-01-01
The technical objective of this research program was to develop a birefringent sensor, capable of measuring strain/stress up to 2000 F and a readout system based on Spectral Contents analysis. As a result of the research work, a data acquisition system was developed, capable of measuring strain birefringence in a sensor at 2000 F, with multi-point static and dynamic capabilities. The system uses a dedicated spectral analyzer for evaluation of stress-birefringence and a PC-based readout. Several sensor methods were evaluated. Fused silica was found most satisfactory. In the final evaluation, measurements were performed up to 2000 F and the system performance exceeded expectations.
NASA Technical Reports Server (NTRS)
Wilson, D. J.; Krause, M. C.; Craven, C. E.; Edwards, B. B.; Coffey, E. W.; Huang, C. C.; Jetton, J. L.; Morrison, L. K.
1974-01-01
A program plan for system evaluation of the two-dimensional Scanning Laser Doppler System (SLDS) is presented. In order to meet system evaluation and optimization objectives the following tests were conducted: (1) noise tests; (2) wind tests; (3) blower flowfield tests; (4) single unit (1-D) flyby tests; and (5) dual unit (2-D) flyby tests. Test results are reported. The final phase of the program included logistics preparation, equipment interface checkouts, and data processing. It is concluded that the SLDS is capable of accurately tracking aircraft wake vortices from small or large aircraft, and in any type of weather.
Method for assessing in-service motor efficiency and in-service motor/load efficiency
Kueck, John D.; Otaduy, Pedro J.
1997-01-01
A method and apparatus for assessing the efficiency of an in-service motor. The operating characteristics of the in-service motor are remotely measured. The operating characteristics are then applied to an equivalent circuit for electrical motors. Finally the equivalent circuit is evaluated to determine the performance characteristics of said in-service motor. Based upon the evaluation an individual is able to determine the rotor speed, power output, efficiency, and toque of the in-service motor. Additionally, an individual is able to confirm the calculations by comparing measured values with values obtained as a result of the motor equivalent circuit evaluation.
Evaluation of Market Design Agents: The Mertacor Perspective
NASA Astrophysics Data System (ADS)
Stavrogiannis, Lampros C.; Mitkas, Pericles A.
The annual Trading Agent Competition for Market Design, CAT, provides a testbed to study the mechanisms that modern stock exchanges use in their effort to attract potential traders while maximizing their profit. This paper presents an evaluation of the agents that participated in the 2008 competition. The evaluation is based on the analysis of the CAT finals as well as on the results obtained from post-tournament experiments. We present Mertacor, our entrant for 2008, and compare it with the other available agents. In addition, we introduce a simple yet effective way of computing the global competitive equilibrium that Mertacor utilizes and discuss its importance for the game.
Feasibility, acceptance and impact of team-based learning in neurology: a pilot study.
Brich, Jochen
2013-01-01
BACKGROUND/GOAL: Neurology is rated as one of the most difficult specialties by medical students, as well as by medical practitioners in other areas. Team-based learning (TBL) as a method of active and group-based learning seems to be a suitable method to achieve greater learning success and a better understanding of neurology. The TBL neurology course was designed as a supplemental program within the regular neurology course for third-year medical students. This supplemental course consisted of six 90-minute units as a pilot study during the 2011-12 winter semester and was evaluated in terms of time and effort. The acceptance of the TBL concept in general, as well as of the TBL neurology course in particular, was assessed using written evaluations. The results of the final exam were analyzed with regard to participation in TBL and the content imparted therein. The preparation time was approximately 8 hours per unit. The implementation was without difficulty. The high rate of regular attendance and the consistently very positive evaluation results indicated a high acceptance of the TBL concept in general, as well as of the TBL neurology course in particular. TBL participants displayed better results on the final exam in topics also covered in the TBL units. The resulting achievement of a subjectively better understanding and a simultaneously higher level of interest in neurology justified the one-time, relatively intense preparation effort for TBL. The high acceptance among students inexperienced in teamwork suggests an unproblematic transfer to other preclinical or clinical courses. The impact on measurably improved results in clinical reasoning and problem-solving skills should be further investigated in the context of controlled studies.
Okoye, Patrick; Wu, Stephen H; Dave, Rutesh H
2012-12-01
The effects of magnesium stearate (MgSt) polymorphs-anhydrate (MgSt-A), monohydrate (MgSt-M), and dihydrate (MgSt-D)-on rheological properties of powders were evaluated using techniques such as atomic analysis and powder rheometry. Additional evaluation was conducted using thermal analysis, micromeritics, and tableting forces. In this study, binary ratios of neat MgSt polymorphs were employed as lubricants in powder blends containing acetaminophen (APAP), microcrystalline cellulose (MCC), and lactose monohydrate (LAC-M). Powder rheometry was studied using permeability, basic flow energy (BFE), density, and porosity analysis. Thermal conductivity and differential scanning calorimetric analysis of MgSt polymorphs were employed to elucidate MgSt effect on powder blends. The impact of MgSt polymorphs on compaction characteristics were analyzed via tablet compression forces. Finally, the distribution of atomized magnesium (Mg) ions as a function of intensity was evaluated using laser-induced breakdown spectroscopy (LIBS) on tablets. The results from LIBS analysis indicated the dependency of the MgSt polymorphic forms on the atomized Mg ion intensity, with higher Mg ion intensity suggesting higher lubricity index (i.e. greater propensity to over-lubricate). The results from lubricity index suggested the tendency of blends to over-lubricate based on the MgSt polymorphic forms. Finally, tableting forces suggested that MgSt-D and MgSt-A offered processing benefits such as lower ejection and compression forces, and that MgSt-M showed the most stable compression force in single or combined polymorphic ratios. These results suggested that the initial moisture content, crystal arrangement, intra- and inter-molecular packing of the polymorphs defined their effects on the rheology of lubricated powders.
Fiocchi, Alessandro; Besana, Roberto; Rydén, Ann-Christine; Terracciano, Luigi; Andreotti, Massimo; Arrigoni, Sergio; Martelli, Alberto
2004-10-01
Allergy-like symptoms are common in young children, but the case history and physical examination cannot identify the underlying origins of overlapping symptom profiles. To evaluate a blood test, Phadiatop Infant (Pharmacia Diagnostics AB, Uppsala, Sweden), for differentiating the capability of IgE-mediated disease in young children with recurrent wheezing, eczema, or both. One hundred forty-seven children (mean age, 2.0 years) were consecutively referred to 2 allergy centers by their primary care physician for recurrent wheezing, eczema, or both. The allergist's clinical evaluation included medical history, physical examination, skin prick testing with inhalant and food allergens, and specific IgE determinations in blood. The accuracy of Phadiatop Infant was evaluated in a masked manner against the allergist's final diagnosis. Sixty-nine children had wheezing, 69 had eczema, and 9 had both symptoms. Sixty-one children were clinically diagnosed as having IgE-mediated allergy, 78 as having non-IgE-associated disease, and 8 as having an inconclusive diagnosis. Fifty-six of the 61 children with IgE-mediated allergy had positive Phadiatop Infant test results, and 64 of 78 without the condition had negative results. Sensitivity was 92% and specificity was 82%, with positive and negative predictive values of 80% and 93%, respectively. Thirteen children with a positive Phadiatop Infant test result and a negative final diagnosis were retested after 2 years; 12 of them were diagnosed as having IgE-mediated allergy using a masked evaluation. The Phadiatop Infant blood test discriminates between IgE- and non-IgE-mediated symptoms in children younger than 4 years.
Final STS-35 Columbia descent BET products and results for LaRC OEX investigations
NASA Technical Reports Server (NTRS)
Oakes, Kevin F.; Findlay, John T.; Jasinski, Rachel A.; Wood, James S.
1991-01-01
Final STS-35 'Columbia' descent Best Estimate Trajectory (BET) products have been developed for Langley Research Center (LaRC) Orbiter Experiments (OEX) investigations. Included are the reconstructed inertial trajectory profile; the Extended BET, which combines the inertial data and, in this instance, the National Weather Service atmospheric information obtained via Johnson Space Center; and the Aerodynamic BET. The inertial BET utilized Inertial Measurement Unit 1 (IMU1) dynamic measurements for deterministic propagation during the ENTREE estimation process. The final estimate was based on the considerable ground based C-band tracking coverage available as well as Tracking Data and Relay Satellite System (TDRSS) Doppler data, a unique use of the latter for endo-atmospheric flight determinations. The actual estimate required simultaneous solutions for the spacecraft position and velocity, spacecraft attitude, and six IMU parameters - three gyro biases and three accelerometer scale factor correction terms. The anchor epoch for this analysis was 19,200 Greenwich Mean Time (GMT) seconds which corresponds to an initial Shuttle altitude of approximately 513 kft. The atmospheric data incorporated were evaluated based on Shuttle derived considerations as well as comparisons with other models. The AEROBET was developed based on the Extended BET, the measured spacecraft configuration information, final mass properties, and the final Orbiter preoperation databook. The latter was updated based on aerodynamic consensus incrementals derived by the latest published FAD. The rectified predictions were compared versus the flight computed values and the resultant differences were correlated versus ensemble results for twenty-two previous STS entry flights.
Judge, Timothy A; Hurst, Charlice; Simon, Lauren S
2009-05-01
The authors investigated core self-evaluations and educational attainment as mediating mechanisms for the influence of appearance (physical attractiveness) and intelligence (general mental ability) on income and financial strain. The direct effects of core self-evaluations on financial strain, as well as the indirect effects through income, were also considered. Longitudinal data were obtained as part of a national study, the Harvard Study of Health and Life Quality, and proposed models were evaluated with structural equation modeling. Results supported a partially mediated model, such that general mental ability and physical attractiveness exhibited both direct and indirect effects on income, as mediated by educational attainment and core self-evaluations. Finally, income negatively predicted financial strain, whereas core self-evaluations had both a direct and an indirect (through income) negative effect on financial strain. Overall, the results suggest that looks (physical attractiveness), brains (intelligence), and personality (core self-evaluations) are all important to income and financial strain. (c) 2009 APA, all rights reserved.
Analysis of landslide hazard area in Ludian earthquake based on Random Forests
NASA Astrophysics Data System (ADS)
Xie, J.-C.; Liu, R.; Li, H.-W.; Lai, Z.-L.
2015-04-01
With the development of machine learning theory, more and more algorithms are evaluated for seismic landslides. After the Ludian earthquake, the research team combine with the special geological structure in Ludian area and the seismic filed exploration results, selecting SLOPE(PODU); River distance(HL); Fault distance(DC); Seismic Intensity(LD) and Digital Elevation Model(DEM), the normalized difference vegetation index(NDVI) which based on remote sensing images as evaluation factors. But the relationships among these factors are fuzzy, there also exists heavy noise and high-dimensional, we introduce the random forest algorithm to tolerate these difficulties and get the evaluation result of Ludian landslide areas, in order to verify the accuracy of the result, using the ROC graphs for the result evaluation standard, AUC covers an area of 0.918, meanwhile, the random forest's generalization error rate decreases with the increase of the classification tree to the ideal 0.08 by using Out Of Bag(OOB) Estimation. Studying the final landslides inversion results, paper comes to a statistical conclusion that near 80% of the whole landslides and dilapidations are in areas with high susceptibility and moderate susceptibility, showing the forecast results are reasonable and adopted.
NASA Astrophysics Data System (ADS)
Turso, S.; Paolella, S.; Gabella, M.; Perona, G.
2013-01-01
In this paper, MicroRadarNet, a novel micro radar network for continuous, unattended meteorological monitoring is presented. Key aspects and constraints are introduced. Specific design strategies are highlighted, leading to the technological implementations of this wireless, low-cost, low power consumption sensor network. Raw spatial and temporal datasets are processed on-board in real-time, featuring a consistent evaluation of the signals from the sensors and optimizing the data loads to be transmitted. Network servers perform the final post-elaboration steps on the data streams coming from each unit. Final network products are meteorological mappings of weather events, monitored with high spatial and temporal resolution, and lastly served to the end user through any Web browser. This networked approach is shown to imply a sensible reduction of the overall operational costs, including management and maintenance aspects, if compared to the traditional long range monitoring strategy. Adoption of the TITAN storm identification and nowcasting engine is also here evaluated for in-loop integration within the MicroRadarNet data processing chain. A brief description of the engine workflow is provided, to present preliminary feasibility results and performance estimates. The outcomes were not so predictable, taking into account relevant operational differences between a Western Alps micro radar scenario and the long range radar context in the Denver region of Colorado. Finally, positive results from a set of case studies are discussed, motivating further refinements and integration activities.
Transportation systems evaluation methodology development and applications, phase 3
NASA Technical Reports Server (NTRS)
Kuhlthau, A. R.; Jacobson, I. D.; Richards, L. C.
1981-01-01
Transportation systems or proposed changes in current systems are evaluated. Four principal evaluation criteria are incorporated in the process, operating performance characteristics as viewed by potential users, decisions based on the perceived impacts of the system, estimating what is required to reduce the system to practice; and predicting the ability of the concept to attract financial support. A series of matrix multiplications in which the various matrices represent evaluations in a logical sequence of the various discrete steps in a management decision process is used. One or more alternatives are compared with the current situation, and the result provides a numerical rating which determines the desirability of each alternative relative to the norm and to each other. The steps in the decision process are isolated so that contributions of each to the final result are readily analyzed. The ability to protect against bias on the part of the evaluators, and the fact that system parameters which are basically qualitative in nature can be easily included are advantageous.
Nakamura, Ryo; Nakano, Kumiko; Tamura, Hiroyasu; Mizunuma, Masaki; Fushiki, Tohru; Hirata, Dai
2017-08-01
Many factors contribute to palatability. In order to evaluate the palatability of Japanese alcohol sake paired with certain dishes by integrating multiple factors, here we applied an evaluation method previously reported for palatability of cheese by multiple regression analysis based on 3 subdomain factors (rewarding, cultural, and informational). We asked 94 Japanese participants/subjects to evaluate the palatability of sake (1st evaluation/E1 for the first cup, 2nd/E2 and 3rd/E3 for the palatability with aftertaste/afterglow of certain dishes) and to respond to a questionnaire related to 3 subdomains. In E1, 3 factors were extracted by a factor analysis, and the subsequent multiple regression analyses indicated that the palatability of sake was interpreted by mainly the rewarding. Further, the results of attribution-dissections in E1 indicated that 2 factors (rewarding and informational) contributed to the palatability. Finally, our results indicated that the palatability of sake was influenced by the dish eaten just before drinking.
Cassano, Roberta; Di Gioia, Maria Luisa; Mellace, Silvia; Picci, Nevio; Trombino, Sonia
2017-11-07
This work concerns on the preparation and performance evaluation of a new chitosan hydroquinone based gauze for hemostatic use. Chitosan and hydroquinone were firstly connected by etherification and then linked to the pre-carboxylate gauze. The functionalized material and the chitosan-hydroquinone ether were characterized by Fourier Transform Infrared (FT-IR) Spectroscopy and Differential Scanning Calorimetry (DSC). FT-IR results showed that an esterification occurred on carboxylic group of the gauze. The gauze functionalization degree was also evaluated by volumetric analysis. The ether hydroquinone content was obtained by the Folin test. Moreover, the linkage between hydroquinone and chitosan was confirmed by nuclear magnetic resonance (NMR). The hemostatic activity of functionalized gauze was evaluated by dynamic blood clotting assays. The obtained results showed that the prepared material can shorten the blood clotting time and induce the adhesion and activation of platelets. Finally, swelling characteristic of the new gauze was evaluated to confirm its high capacity to absorb the blood.
NASA Astrophysics Data System (ADS)
Defrance, Dimitri; Javelle, Pierre; Ecrepont, Stéphane; Andreassian, Vazken
2013-04-01
In Europe, flash floods mainly occur in the Mediterranean area on small catchments with a short concentration time. Anticipating this kind of events is a major issue in order to reduce the resulting damages. But for many of the impacted catchments, no data are available to calibrate and evaluate hydrological models. In this context, the aims of this study is to develop and evaluate a warning method for the Southern French Alps. This area is of particular interest, because it regroups different hydrological regimes, from purely Mediterranean to purely Alpine influences. Two main issues should be addressed: - How to define the hydrological model and its parameterization for an application in an ungauged context? - How to evaluate the final results on 'real' ungauged catchments? The first issue is a classic one. Using a 'observed' data set (154 streamflow stations with catchment areas ranging from 5 to 1000 km² and distributed rainfall available on the 1997-2006 period), we developed a regional model specifically for the studied area. For this purpose, the AIGA method, initially developed for Mediterranean catchments was adapted, in order to take into account snowmelt and to produce baseflows. Then, different parameterizations were tested, derived from different simple regionalisation techniques: - the same parameters set for the whole area defined as the median of the local calibrated parameters; - the same technique as the previous case, but by considering different sub-areas, defined as "hydro-climatically" homogeneous by previous studies; - and finally the neighbour's method. The second issue is more original. Indeed, in most studies the final evaluation is done using gauged stations as they were 'ungauged', ie keeping the at-site discharge data only for validation ant not for calibration. The main disadvantage of this approach is that the evaluation is made at the scale of the gauged catchments, which are in general greater than the catchments impacted by flash floods. Furthermore, many events are missed, since flash floods can occur very locally. In this study, we try to evaluate the results on observations collected by witnesses on 'real' ungauged catchments. The proposed method consists to use an historical data-base of flood damages reports. These data have been collected by local authorities (RTM). Finally, 139 ungauged locations were considered, where we simulated discharges for the entire 1997-2006 period. The comparison of these modelled discharges with the occurrence of an observed discharge makes it possible to determine a local 'modelled' discharge threshold above it most of the damages are observed. The pertinence of this threshold (and consequently of the model used for the simulation) is assessed by considering classical contingency statistics: probability of detection (POD), false alarm rate (FAR) and critical success index (CSI). The main advantage of this historical approach is the availability of many events in the database on very small catchments (50% less than 20 km²). The preliminary results show that on gauged basins, the base flow and the snowmelt added modules improve the performance of the AIGA method when locally calibrated. But when results are applied on real ungauged catchments, improvements become less obvious, with a small advantage for neighbour's method. These results shows the difficulty arising with ungauged catchments, specially when target catchments are smaller than the gauged 'parents'. It also illustrates the interest of the damages database used as 'proxy' data to investigate the model performances at smaller scales. This work has been done in the framework of the RHYTMME project, with the financial support of the European Union, the Provence-Alpes-Côte d'Azur Region and the French Ministry in charge of Ecology.
Skylab program earth resources experiment package sensor performance evaluation, volume 1, (S190A)
NASA Technical Reports Server (NTRS)
Kenney, G. P.
1975-01-01
The results of S190A sensor performance evaluation are summarized based on data presented by all contributors to the sensor performance evaluation interim reports. Techniques used in sensor performance evaluation are discussed. Topics discussed include: performance degradation identified during the Skylab missions, S190A and EREP system anomalies that affected S190A performance, and the performance achieved, in terms of pertinent S190A parameters. Additional analyses include final performance analyses completed after submittal of the SL4 interim sensor performance evaluation reports, including completion of detailed analyses of basic performance parameters initiated during the interim report periods and consolidation analyses to reduce independent mission data (SL2, SL3, and SL4) to determine overall performance realized during all three Skylab missions.
Report of sampling and analysis results, Addison Army housing units, Addison, Illinois. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1990-09-01
The objectives of this sampling and analysis effort include further characterization of environmental contamination identified in an enhanced preliminary assessment carried out in 1989. The specific activities performed at this site were identification, evaluation of the condition, and collection of samples from specific suspected asbestos-containing materials, including floor tiles, pipe run and pipe fitting insulation, dust in the ductwork, and exterior siding, where present. These evaluation were necessary to clarify potential environmental issues identified in the earlier report, prior to the sale or realignment of the property.
Evaluation of floating-point sum or difference of products in carry-save domain
NASA Technical Reports Server (NTRS)
Wahab, A.; Erdogan, S.; Premkumar, A. B.
1992-01-01
An architecture to evaluate a 24-bit floating-point sum or difference of products using modified sequential carry-save multipliers with extensive pipelining is described. The basic building block of the architecture is a carry-save multiplier with built-in mantissa alignment for the summation during the multiplication cycles. A carry-save adder, capable of mantissa alignment, correctly positions products with the current carry-save sum. Carry propagation in individual multipliers is avoided and is only required once to produce the final result.
New atmospheric sensor analysis study
NASA Technical Reports Server (NTRS)
Parker, K. G.
1989-01-01
The functional capabilities of the ESAD Research Computing Facility are discussed. The system is used in processing atmospheric measurements which are used in the evaluation of sensor performance, conducting design-concept simulation studies, and also in modeling the physical and dynamical nature of atmospheric processes. The results may then be evaluated to furnish inputs into the final design specifications for new space sensors intended for future Spacelab, Space Station, and free-flying missions. In addition, data gathered from these missions may subsequently be analyzed to provide better understanding of requirements for numerical modeling of atmospheric phenomena.
Green's function of radial inhomogeneous spheres excited by internal sources.
Zouros, Grigorios P; Kokkorakis, Gerassimos C
2011-01-01
Green's function in the interior of penetrable bodies with inhomogeneous compressibility by sources placed inside them is evaluated through a Schwinger-Lippmann volume integral equation. In the case of a radial inhomogeneous sphere, the radial part of the unknown Green's function can be expanded in a double Dini's series, which allows analytical evaluation of the involved cumbersome integrals. The simple case treated here can be extended to more difficult situations involving inhomogeneous density as well as to the corresponding electromagnetic or elastic problem. Finally, numerical results are given for various inhomogeneous compressibility distributions.
Robust Adaptive Data Encoding and Restoration
NASA Technical Reports Server (NTRS)
Park, Stephen K.; Rahman, Zia-ur; Halyo, Nesim
2000-01-01
This is the final report for NASA cooperative agreement and covers the period from 01 October, 1997 to 11 April, 2000. The research during this period was performed in three primary, but related, areas. 1. Evaluation of integrated information adaptive imaging. 2. Improvements in memory utilization and performance of the multiscale retinex with color restoration (MSRCR). 3. Commencement of a theoretical study to evaluate the non-linear retinex image enhancement technique. The research resulted in several publications, and an intellectual property disclosure to the NASA patent council in May, 1999.
Hockett, K.A.; Clark, Y.F.; Leung, J.L.; ,; Park, L.
2010-01-01
This report presents the results of research conducted on the 96-acre Bear Island along the Billy Goat Trail, Section A (BGT) that evaluated visitor motivations for off-trail hiking and the efficacy of four treatments designed to reduce this activity. This research was prompted by concerns about the impact of an extensive informal (visitor-created) trail network on Bear Island, because it provides habitat for more than 50 species of rare, threatened or endangered plant and animal species.
Kim, Kyung Ran; Park, Ah-Young; Moon, Hyung Ryong; Chun, Moon Woo; Jeong, Lak Shin
2007-01-01
Novel iso D-2',3'-dideoxythianucleoside derivatives 1-3 were designed and asymmetrically synthesized to search for new anti-HIV agents. Final compounds 1-3 were evaluated against a variety of viruses including HIV-1 and 2. Only cytosine analog 3 showed a potent anti-VSV activity (EC(50) = 9.43 microg/mL). This result implies that iso 2',3'-dideoxy sugar templates might play a role of a sugar surrogate of nucleosides for the development of anti-RNA virus agent.
Schacht, M J; Toustrup, C B; Madsen, L B; Martiny, M S; Larsen, B B; Simonsen, J T
2016-10-01
Rapid on-site evaluation (ROSE) of endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) followed by a subsequent preliminary adequacy assessment and a preliminary diagnosis, was performed at Aarhus University Hospital by biomedical scientists (BMS). The aim of this study was to evaluate the BMS accuracy of ROSE adequacy assessment, the preliminary adequacy assessment and the preliminary diagnosis as compared with the cytopathologist-rendered final adequacy assessment and final diagnosis. The BMS-rendered assessments for 717 sites from 319 consecutive patients over a 4-month period were compared with the cytopathologist-rendered assessments. Comparisons of adequacy and preliminary diagnoses were based on inter-observer Cohen's Kappa coefficient with a 95% confidence interval (CI). Strong correlations between ROSE and final adequacy assessments [Kappa coefficient of 0.90 (CI: 0.85-0.96)] and between the preliminary and final adequacy assessments [Kappa coefficient of 0.93 (CI: 0.87-0.99)] were found. As for the correlation between the preliminary and final diagnoses, the Kappa coefficient was 0.99 (CI: 0.98-1). Both ROSE and preliminary adequacy assessments as well as preliminary diagnoses, all performed by BMS, were highly accurate when compared with the final assessment by the cytopathologist. © 2016 John Wiley & Sons Ltd.