Sample records for finally preliminary experimental
-
Conceptual and Preliminary Design of a Low-Cost Precision Aerial Delivery System
2016-06-01
test results. It includes an analysis of the failure modes encountered during flight experimentation , methodology used for conducting coordinate...and experimentation . Additionally, the current and desired end state of the research is addressed. Finally, this chapter outlines the methodology ...preliminary design phases are utilized to investigate and develop a potentially low-cost alternative to existing systems. Using an Agile methodology
-
[Evaluation of preliminary grades and credits in nurse training programs].
Darmann-Finck, Ingrid; Duveneck, Nicole
2016-01-01
In the federal state of Bremen preliminary grades were included to the extent of 25 % in written, oral and practical final grades during the time period 2009-2014. The evaluation focuses on the effects of preliminary grades on the scale of final grades and the performance of learners as well as on the assessment of the appropriateness of final grades. A mixed-methods design was employed that consisted of a quasi-experimental study comprising of surveys of students and teachers of comparative and model courses as well as a qualitative study using group discussions. The results confirm that preliminary grades lead to a minimal improvement of the final grades of some exclusively low-achieving students. The assessment of appropriateness hardly changed. From both learners' and teachers' point of view there is still great dissatisfaction concerning the practical final grades. With regard to learning habits an increased willingness to learn new skills on the one hand and a partly increased performance pressure on the other hand were demonstrated. On the basis of these research results, the authors recommend the regular introduction of preliminary marks into the nursing training. Copyright © 2016. Published by Elsevier GmbH.
-
An experimental study of scalar mixing in curved shear layers
NASA Technical Reports Server (NTRS)
Karasso, P. S.; Mungal, M. G.
1990-01-01
This report describes the work being undertaken to study the scalar mixing in curved shear layers. First, the motivation for this work and its objectives are described. Second, a description of the experimental rig that has been built is given. Third, some preliminary results (flow visualizations) are discussed, and finally, future steps that will be taken to complete the study are outlined.
-
Effect of Hypertextual Reading on Academic Success and Comprehension Skills
ERIC Educational Resources Information Center
Durukan, Erhan
2014-01-01
As computer technology developed, hypertexts emerged as an influential environment for developing language skills. This study aims to evaluate a text prepared in a hypertextual environment and its effects on academic success and comprehension skills. In this study, "preliminary test final test control group experimental pattern" was used…
-
Space station wardroom habitability and equipment study
NASA Technical Reports Server (NTRS)
Nixon, David; Miller, Christopher; Fauquet, Regis
1989-01-01
Experimental designs in life-size mock-up form for the wardroom facility for the Space Station Habitability Module are explored and developed. In Phase 1, three preliminary concepts for the wardroom configuration are fabricated and evaluated. In Phase 2, the results of Phase 1 are combined with a specific range of program design requirements to provide the design criteria for the fabrication of an innovative medium-fidelity mock-up of a wardrobe configuration. The study also focuses on the design and preliminary prototyping of selected equipment items including crew exercise compartments, a meal/meeting table and a portable workstation. Design criteria and requirements are discussed and documented. Preliminary and final mock-ups and equipment prototypes are described and illustrated.
-
Electrical termination techniques
NASA Technical Reports Server (NTRS)
Oakey, W. E.; Schleicher, R. R.
1976-01-01
A technical review of high reliability electrical terminations for electronic equipment was made. Seven techniques were selected from this review for further investigation, experimental work, and preliminary testing. From the preliminary test results, four techniques were selected for final testing and evaluation. These four were: (1) induction soldering, (2) wire wrap, (3) percussive arc welding, and (4) resistance welding. Of these four, induction soldering was selected as the best technique in terms of minimizing operator errors, controlling temperature and time, minimizing joint contamination, and ultimately producing a reliable, uniform, and reusable electrical termination.
-
Decision-Making in Flight with Different Convective Weather Information Sources: Preliminary Results
NASA Technical Reports Server (NTRS)
Latorella, Kara A.; Chamberlain, James P.
2004-01-01
This paper reports preliminary and partial results of a flight experiment to address how General Aviation (GA) pilots use weather cues to make flight decisions. This research presents pilots with weather cue conditions typically available to GA pilots in visual meteorological conditions (VMC) and instrument meteorological conditions (IMC) today, as well as in IMC with a Graphical Weather Information System (GWIS). These preliminary data indicate that both VMC and GWIS-augmented IMC conditions result in better confidence, information sufficiency and perceived performance than the current IMC condition. For all these measures, the VMC and GWIS-augmented conditions seemed to provide similar pilot support. These preliminary results are interpreted for their implications on GWIS display design, training, and operational use guidelines. Final experimental results will compare these subjective data with objective data of situation awareness and decision quality.
-
Precursor Selection for Property Optimization in Biomorphic SiC Ceramics
NASA Technical Reports Server (NTRS)
Varela-Feria, F. M.; Lopez-Robledo, M. J.; Martinez-Fernandez, J.; deArellano-Lopez, A. R.; Singh, M.; Gray, Hugh R. (Technical Monitor)
2002-01-01
Biomorphic SiC ceramics have been fabricated using different wood precursors. The evolution of volume, density and microstructure of the woods, carbon performs, and final SiC products are systematically studied in order to establish experimental guidelines that allow materials selection. The wood density is a critical characteristic, which results in a particular final SiC density, and the level of anisotropy in mechanical properties in directions parallel (axial) and perpendicular (radial) to the growth of the wood. The purpose of this work is to explore experimental laws that can help choose a type of wood as precursor for a final SiC product, with a given microstructure, density and level of anisotropy. Preliminary studies of physical properties suggest that not only mechanical properties are strongly anisotropic, but also electrical conductivity and gas permeability, which have great technological importance.
-
Preliminary Design of Winged Experimental Rocket by University Consortium
NASA Astrophysics Data System (ADS)
Wakita, Masashi; Yonemoto, Koichi; Akiyama, Tomoki; Aso, Shigeru; Kohsetsu, Yuji; Nagata, Harunori
The project of Winged Experimental Rocket described here is a proposal by the alliance of universities (University Consortium) expanding and integrating the research activities of reusable space transportation system performed by individual universities, and is the proposal that aims at flight proof of the results of advanced research conducted by the universities and JAXA using the university-centered experimental launch systems. This paper verifies the validity of the winged experimental rocket by surveying the technical issues that should be demonstrated and by estimating the airframe scale, weight and finally the total cost. The development schedule of this project was set to five years, where two airframes of different scales will be developed to minimize the risks. A 1.5-meter-long airframe will be first manufactured and conduct flight tests in the third year to verify the design issues. Then, a 2.5-meter-long airframe will be finally developed and conduct a complete flight demonstration of various research issues in the fifth year.
-
Schacht, M J; Toustrup, C B; Madsen, L B; Martiny, M S; Larsen, B B; Simonsen, J T
2016-10-01
Rapid on-site evaluation (ROSE) of endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) followed by a subsequent preliminary adequacy assessment and a preliminary diagnosis, was performed at Aarhus University Hospital by biomedical scientists (BMS). The aim of this study was to evaluate the BMS accuracy of ROSE adequacy assessment, the preliminary adequacy assessment and the preliminary diagnosis as compared with the cytopathologist-rendered final adequacy assessment and final diagnosis. The BMS-rendered assessments for 717 sites from 319 consecutive patients over a 4-month period were compared with the cytopathologist-rendered assessments. Comparisons of adequacy and preliminary diagnoses were based on inter-observer Cohen's Kappa coefficient with a 95% confidence interval (CI). Strong correlations between ROSE and final adequacy assessments [Kappa coefficient of 0.90 (CI: 0.85-0.96)] and between the preliminary and final adequacy assessments [Kappa coefficient of 0.93 (CI: 0.87-0.99)] were found. As for the correlation between the preliminary and final diagnoses, the Kappa coefficient was 0.99 (CI: 0.98-1). Both ROSE and preliminary adequacy assessments as well as preliminary diagnoses, all performed by BMS, were highly accurate when compared with the final assessment by the cytopathologist. © 2016 John Wiley & Sons Ltd.
-
High-performance space shuttle auxiliary propellant valve system
NASA Technical Reports Server (NTRS)
Smith, G. M.
1973-01-01
Several potential valve closures for the space shuttle auxiliary propulsion system (SS/APS) were investigated analytically and experimentally in a modeling program. The most promising of these were analyzed and experimentally evaluated in a full-size functional valve test fixture of novel design. The engineering investigations conducted for both model and scale evaluations of the SS/APS valve closures and functional valve fixture are described. Preliminary designs, laboratory tests, and overall valve test fixture designs are presented, and a final recommended flightweight SS/APS valve design is presented.
-
Cognitive Task Analysis of Business Jet Pilots' Weather Flying Behaviors: Preliminary Results
NASA Technical Reports Server (NTRS)
Latorella, Kara; Pliske, Rebecca; Hutton, Robert; Chrenka, Jason
2001-01-01
This report presents preliminary findings from a cognitive task analysis (CTA) of business aviation piloting. Results describe challenging weather-related aviation decisions and the information and cues used to support these decisions. Further, these results demonstrate the role of expertise in business aviation decision-making in weather flying, and how weather information is acquired and assessed for reliability. The challenging weather scenarios and novice errors identified in the results provide the basis for experimental scenarios and dependent measures to be used in future flight simulation evaluations of candidate aviation weather information systems. Finally, we analyzed these preliminary results to recommend design and training interventions to improve business aviation decision-making with weather information. The primary objective of this report is to present these preliminary findings and to document the extended CTA methodology used to elicit and represent expert business aviator decision-making with weather information. These preliminary findings will be augmented with results from additional subjects using this methodology. A summary of the complete results, absent the detailed treatment of methodology provided in this report, will be documented in a separate publication.
-
[Role of occupational rehabilitation therapy in returning to work: experimental experience].
Bazzini, Giacomo; Panigazzil, Monica; Prestifilippo, Elena; Capodaglio, Edda Maria; Candura, Stefano M; Scafa, Fabrizio; Nuccio, Carla; Cortese, Giovanni; Matarrese, Maria Rosaria; Miccio, Antonella
2014-01-01
The experimental experience is the result of combining cultural, clinical and scientific interest in rehabilitative, occupational and forensic mnedicine and in ergonomics. It deals with the rehabilitation and return at work of patients with physical disabilities caused by occupational trauma or disease. The programme described starts with a selection by INAIL and involves with an outpatient surgery inclusion. It is composed of: preliminary physical examination, functional assessment, the formulation of a rehabilitation plan and its successive implementation. At the end of the evaluation plan, there is a final assessment to identify outcome indicators and residual functional and work capacity.
-
NASA/USRA advanced design program
NASA Technical Reports Server (NTRS)
1992-01-01
This report analyzes and presents a preliminary design for an experimental hypersonic vehicle. This plane will have a cruise speed of Mach 12 for one minute at an altitude of 120,000 feet. The major design areas of aerodynamics, propulsion, and weights are discussed in depth. An elementary analysis of thermal protection, trajectory, and cost is also presented. Finally, a discussion of future plans and recommendations is given, and overall conclusions are drawn.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ilieva, Yordanka; Cao, Tongtong; Zachariou, Nicholas
2016-06-01
Theoretical studies suggest that experimental observables for hyperon production reactions can place stringent constraints on the free parameters of hyperon-nucleon potentials, which are critical for the understanding of hypernuclear matter and neutron stars. Here we present preliminary experimental results for the polarization observables S, Py, Ox, Oz, Cx, and Cz for final-state interactions (FSI) in exclusive L photoproduction off the deuteron. The observables were obtained from data collected during the E06-103 (g13) experiment with the CEBAF Large Acceptance Spectrometer (CLAS) in Hall B at Jefferson Lab. The g13 experiment ran with unpolarized deuteron target and circularly- and linearly-polarized photon beamsmore » with energies between 0.5 GeV and 2.5 GeV and collected about 51010 events with multiple charged particles in the final state. To select the reaction of interest, the K+ and the L decay products, a proton and a negative pion, were detected in the CLAS. The missing-mass technique was used to identify exclusive hyperon photoproduction events. Final-state interaction events were selected by requesting that the reconstructed neutron has a momentum larger than 200 MeV/c. The large statistics of E06-103 provided statistically meaningful FSI event samples, which allow for the extraction of one- and two-fold differential single- and double-polarization observables. Here we present preliminary results for a set of six observables for photon energies between 0.9 GeV and 2.3 GeV and for several kinematic variables in the Ln center-of-mass frame. Our results are the very first estimates of polarization observables for FSI in hyperon photoproduction and will be used to constrain the free parameters of hyperon-nucleon potentials.« less
-
Performance Gains of Propellant Management Devices for Liquid Hydrogen Depots
NASA Technical Reports Server (NTRS)
Hartwig, Jason W.; McQuillen, John B.; Chato, David J.
2013-01-01
This paper presents background, experimental design, and preliminary experimental results for the liquid hydrogen bubble point tests conducted at the Cryogenic Components Cell 7 facility at the NASA Glenn Research Center in Cleveland, Ohio. The purpose of the test series was to investigate the parameters that affect liquid acquisition device (LAD) performance in a liquid hydrogen (LH2) propellant tank, to mitigate risk in the final design of the LAD for the Cryogenic Propellant Storage and Transfer Technology Demonstration Mission, and to provide insight into optimal LAD operation for future LH2 depots. Preliminary test results show an increase in performance and screen retention over the low reference LH2 bubble point value for a 325 2300 screen in three separate ways, thus improving fundamental LH2 LAD performance. By using a finer mesh screen, operating at a colder liquid temperature, and pressurizing with a noncondensible pressurant gas, a significant increase in margin is achieved in bubble point pressure for LH2 screen channel LADs.
-
Polarized 3He target and Final State Interactions in SiDIS
Del Dotto, Alessio; Kaptari, Leonid; Pace, Emanuele; ...
2017-01-03
Jefferson Lab is starting a wide experimental program aimed at studying the neutron’s structure, with a great emphasis on the extraction of the parton transverse-momentum distributions (TMDs). To this end, Semi-inclusive deep-inelastic scattering (SiDIS) experiments on polarized $^3$He will be carried out, providing, together with proton and deuteron data, a sound flavor decomposition of the TMDs. Here, given the expected high statistical accuracy, it is crucial to disentangle nuclear and partonic degrees of freedom to get an accurate theoretical description of both initial and final states. In this contribution, a preliminary study of the Final State Interaction (FSI) in themore » standard SiDIS, where a pion (or a Kaon) is detected in the final state is presented, in view of constructing a realistic description of the nuclear initial and final states.« less
-
Manufacture of Solar Cells on the Moon
NASA Technical Reports Server (NTRS)
Freundich, Alex; Ignatiev, Alex; Horton, Charles; Duke, Mike; Curren, Peter; Sibille, Laurent
2005-01-01
In support of the space exploration initiative a new architecture for the production of solar cells on the lunar surface is devised. The paper discusses experimental data on the fabrication and properties of lunar glass substrates, evaporated lunar regolith thin film (antireflect coatings and insulators), and preliminary attempts in the fabrication of thin film (silicon/II-VI) photovoltaic materials on lunar regolith substrates. A conceptual design for a solar powered robotic rover capable of fabricating solar cells directly on the lunar surface is provided. Technical challenges in the development of such a facility and strategies to alleviate perceived difficulties are discussed. Finally, preliminary cost benefit ratio analysis for different in situ solar cell production scenarios (using exclusively in-situ planetary resources or hybrid) are discussed.
-
NASA Technical Reports Server (NTRS)
Motil, Brian J.; Green, R. D.; Nahra, H. K.; Sridhar, K. R.
2000-01-01
For long-duration space missions, the life support and In-Situ Resource Utilization (ISRU) systems necessary to lower the mass and volume of consumables carried from Earth will require more sophisticated chemical processing technologies involving gas-liquid two-phase flows. This paper discusses some preliminary two-phase flow work in packed columns and generation of bubbly suspensions, two types of flow systems that can exist in a number of chemical processing devices. The experimental hardware for a co-current flow, packed column operated in two ground-based low gravity facilities (two-second drop tower and KC- 135 low-gravity aircraft) is described. The preliminary results of this experimental work are discussed. The flow regimes observed and the conditions under which these flow regimes occur are compared with the available co-current packed column experimental work performed in normal gravity. For bubbly suspensions, the experimental hardware for generation of uniformly sized bubbles in Couette flow in microgravity conditions is described. Experimental work was performed on a number of bubbler designs, and the capillary bubble tube was found to produce the most consistent size bubbles. Low air flow rates and low Couette flow produce consistent 2-3 mm bubbles, the size of interest for the "Behavior of Rapidly Sheared Bubbly Suspension" flight experiment. Finally the mass transfer implications of these two-phase flows is qualitatively discussed.
-
Geostationary platform systems concepts definition study. Volume 2: Technical, book 3
NASA Technical Reports Server (NTRS)
1980-01-01
The supporting research and technology, and space demonstrations required to support the 1990s operational geostationary platforms are identified. Also the requirements on and interfaces with the Space Transportation System hardware elements supporting the geostationary platform program, including the shuttle, orbital transfer vehicles, teleoperator, etc., are investigated to provide integrated support requirements. Finally, a preliminary evaluation of the practicability and capabilities of an experimental platform from the standpoint of technology, schedule, and cost is given.
-
2010-03-01
finally discuss some preliminary experimental results using systems with chrome spheres and small Nitinol interstitial grains to present the... Nitinol interstitial grains to present the underlying nonlinear dynamics of this so-called decorated tapered granular alignment. We are specifically...second was the DTC setup. In this case, small Nitinol 2.38 mm diameter particles were in- troduced between the main STC particles so that NDTC=9. 53 The
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-18
... has added several case numbers to the Case Reference file within the Automated Commercial Environment... Vietnam: Preliminary Results, Preliminary Partial Rescission and Final Partial Rescission of the Second... the Socialist Republic of Vietnam: Final Results and Final Partial Rescission of Antidumping Duty...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-05
... People's Republic of China: Preliminary Results of Changed Circumstances Review AGENCY: Import... invited to comment on these preliminary results. DATES: Effective Date: July 5, 2012. FOR FURTHER... its final determination for this investigation on April 4, 2011.\\1\\ As a result of that final...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-24
... New Shipper Reviews AGENCY: Import Administration, International Trade Administration, Department of... (the Department) published in the Federal Register the preliminary results of the new shipper reviews...: Preliminary Results of Antidumping Duty New Shipper Reviews, 75 FR 66729 (October 29, 2010) (Preliminary...
-
EPA announced the availability of the final report,Climate Change Effects on Stream and River Biological Indicators: A Preliminary Analysis. This report is a preliminary assessment that describes how biological indicators are likely to respond to climate change, how wel...
-
A rotary drum dryer for palm sterilization: preliminary study of flow and heat transfer using CFD
NASA Astrophysics Data System (ADS)
Hanifarianty, S.; Legwiriyakul, A.; Alimalbari, A.; Nuntadusit, C.; Theppaya, T.; Wae-Hayee, M.
2018-01-01
Preliminary study in this article, the flow and the heat transfer of rotary drum dryer were simulated by using Computational Fluid Dynamics (CFD). A 3D modelling of rotary drum dryer including ambient air was created by considering transient simulation. The temperature distributions on rotary drum dryer surfaces of experimental setup during heating detected by using infrared camera were given to be boundary conditions of modelling. The average temperature at the surface of the drum lids was 80°C, and the average temperature on the heated surface of the drum was 130°C. The results showed that the internal temperature of air in drum modelling was increased relating on time dependent. The final air temperature inside the drum modelling was similar to the measurement results.
-
Comparison-Bot: an Automated Preliminary-Final Report Comparison System.
Kalaria, Amit D; Filice, Ross W
2016-06-01
Regular comparison of preliminary to final reports is a critical part of radiology resident and fellow education as prior research has documented substantial preliminary to final discrepancies. Unfortunately, there are many barriers to this comparison: high study volume; overnight rotations without an attending; the ability to finalize reports remotely; the subtle nature of many changes; and lack of easy access to the preliminary report after finalization. We developed a system that automatically compiles and emails a weekly summary of report differences for all residents and fellows. Trainees can also create a custom report using a date range of their choice and can view this data on a resident dashboard. Differences between preliminary and final reports are clearly highlighted with links to the associated study in Picture Archiving and Communication Systems (PACS) for efficient review and learning. Reports with more changes, particularly changes made in the impression, are highlighted to focus attention on those exams with substantive edits. Our system provides an easy way for trainees to review changes to preliminary reports with immediate access to the associated images, thereby improving their educational experience. Departmental surveys showed that our report difference summary is easy to understand and improves the educational experience of our trainees. Additionally, interesting descriptive statistics help us understand how reports are changed by trainee level, by attending, and by exam type. Finally, this system can be easily ported to other departments who have access to their Health Level 7 (HL7) data.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-16
... Brazil: Preliminary Results of Antidumping Duty Administrative Review AGENCY: Import Administration... results are adopted in our final results of administrative review, we will instruct U.S. Customs and... invited to comment on these preliminary results of review. We intend to issue the final results of review...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-14
...-Alloy Steel Pipe From Mexico: Final Results of Antidumping Duty Administrative Review AGENCY: Import... Department of Commerce (the Department) published the preliminary results of the administrative review of the...: Preliminary Results of Antidumping Duty Administrative Review, 76 FR 49437 (August 10, 2011) (Preliminary...
-
76 FR 74044 - Honey From Argentina: Final Results of Antidumping Duty New Shipper Review
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-30
... DEPARTMENT OF COMMERCE International Trade Administration [A-357-812] Honey From Argentina: Final...) published its preliminary results of the 2009-2010 new shipper review of the antidumping duty order on honey... Preliminary Results. \\1\\ See Honey From Argentina: Preliminary Results of Antidumping Duty New Shipper Review...
-
Martin, Michael R.; Kopstein, Andrea; Janice, Joy M.
2010-01-01
There has been the impression amongst many observers that discussion of a grant application has little practical impact on the final priority scores. Rather the final score is largely dictated by the range of preliminary scores given by the assigned reviewers. The implication is that the preliminary and final scores are the same and the discussion has little impact. The purpose of this examination of the peer review process at the National Institutes of Health is to describe the relationship between preliminary priority scores of the assigned reviewers and the final priority score given by the scientific review group. This study also describes the practical importance of any differences in priority scores. Priority scores for a sample of standard (R01) research grant applications were used in this assessment. The results indicate that the preliminary meeting evaluation is positively correlated with the final meeting outcome but that they are on average significantly different. The results demonstrate that discussion at the meeting has an important practical impact on over 13% of the applications. PMID:21103331
-
NASA Technical Reports Server (NTRS)
Pozzobon, Oscar; Fantinato, Samuele; Dalla Chiara, Andrea; Gamba, Giovanni; Crisci, Massimo; Giordana, Pietro; Enderle, Werner; Chelmins, David; Sands, Obed S.; Clapper, Carolyn J.;
2016-01-01
The Space Communications and Navigation (SCaN) is a facility developed by NASA and hosted on board the International Space Station (ISS) on an external truss since 2013.It has the objective of testing navigation and communication experimentations with a Software Defined Radio (SDR) approach, which permits software updates for testing new experimentations.NASA has developed the Space Telecommunications Radio System (STRS) architecture standard for SDRs used in space and ground-based platforms to provide commonality among radio developments to provide enhanced capability. The hardware is equipped with both L band front-end radios and the NASA space network communicates with it using S-band, Ku-band and Ka-band links.In May 2016 Qascom started GARISS (GPS and Galileo Receiver for the ISS), an activity of experimentation in collaboration with ESA and NASA that has the objective to develop and validate the acquisition and processing of combined GPS and Galileo signals on board the ISS SCaN testbed. This paper has the objective to present the mission, and provide preliminary details about the challenges in the design, development and verification of the waveform that will be installed on equipment with limited resources. GARISS is also the first attempt to develop a waveform for the ISS as part of an international collaboration between US and Europe. Although the final mission objective is to target dual frequency processing, initial operations will foresee a single frequency processing. Initial results and trade-off between the two options, as well as the final decision will be presented and discussed. The limited resources on board the SCaN with respect to the challenging requirements to acquire and track contemporaneously two satellite navigation systems, with different modulations and data structure, led to the need to assess the possibility of aiding from ground through the S-band. This option would allow assistance to the space receiver in order to provide knowledge of GNSS orbits and reduce the processing on board. Trade off and various options for telemetry and uplink data are presented and discussed. Finally, integration and validation of the waveform are one of the major challenges of GARISS: The Experiment Development System (EDS) and the the Ground Integration Unit (GIU) for VV will be used prior to conducting the experiment on the ISS. The EDS can be used in lab environment and allows prototyping and verification activities with the simulator, but does not include all hardware components. The GIU on the other side is the flight model which replicates the flying equipment, but has limited flexibility for testing.As conclusion, the project is now approaching the Preliminary Design Review (PDR) and indeed only preliminary results are available. This paper is an opportunity to present the GARISS mission as part of an International cooperation between ESA, NASA and Qascom. The preliminary results include GPS and Galileo processing from space signals, the challenges and trade off decisions, the high level STRS architecture and foreseen experimentation campaign. Detailed results from the test campaigns are expected in 2017.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-03
...-preliminary analysis and released the results of the analysis on May 19, 2010. We gave the interested parties an opportunity to comment on the Preliminary Results and the post-preliminary analysis. Based on our analysis of the comments received, we have made changes to the margin calculation. The final weighted...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-05
... People's Republic of China: Final Results of Antidumping Duty Administrative Review AGENCY: Import... Department of Commerce (``Department'') published the preliminary results of the administrative review of the... made changes to the margin calculations. Therefore, the final results differ from the preliminary...
-
High quality image-pair-based deblurring method using edge mask and improved residual deconvolution
NASA Astrophysics Data System (ADS)
Cui, Guangmang; Zhao, Jufeng; Gao, Xiumin; Feng, Huajun; Chen, Yueting
2017-04-01
Image deconvolution problem is a challenging task in the field of image process. Using image pairs could be helpful to provide a better restored image compared with the deblurring method from a single blurred image. In this paper, a high quality image-pair-based deblurring method is presented using the improved RL algorithm and the gain-controlled residual deconvolution technique. The input image pair includes a non-blurred noisy image and a blurred image captured for the same scene. With the estimated blur kernel, an improved RL deblurring method based on edge mask is introduced to obtain the preliminary deblurring result with effective ringing suppression and detail preservation. Then the preliminary deblurring result is served as the basic latent image and the gain-controlled residual deconvolution is utilized to recover the residual image. A saliency weight map is computed as the gain map to further control the ringing effects around the edge areas in the residual deconvolution process. The final deblurring result is obtained by adding the preliminary deblurring result with the recovered residual image. An optical experimental vibration platform is set up to verify the applicability and performance of the proposed algorithm. Experimental results demonstrate that the proposed deblurring framework obtains a superior performance in both subjective and objective assessments and has a wide application in many image deblurring fields.
-
14 CFR 417.1 - General information.
Code of Federal Regulations, 2014 CFR
2014-01-01
... package, (3) Preliminary and final flight data packages, (4) A tailored version of EWR 127-1, (5) Range...) Missile system pre-launch safety package, (3) Preliminary and final flight data packages, (4) A tailored...
-
14 CFR 417.1 - General information.
Code of Federal Regulations, 2013 CFR
2013-01-01
... package, (3) Preliminary and final flight data packages, (4) A tailored version of EWR 127-1, (5) Range...) Missile system pre-launch safety package, (3) Preliminary and final flight data packages, (4) A tailored...
-
14 CFR 417.1 - General information.
Code of Federal Regulations, 2011 CFR
2011-01-01
... package, (3) Preliminary and final flight data packages, (4) A tailored version of EWR 127-1, (5) Range...) Missile system pre-launch safety package, (3) Preliminary and final flight data packages, (4) A tailored...
-
14 CFR 417.1 - General information.
Code of Federal Regulations, 2012 CFR
2012-01-01
... package, (3) Preliminary and final flight data packages, (4) A tailored version of EWR 127-1, (5) Range...) Missile system pre-launch safety package, (3) Preliminary and final flight data packages, (4) A tailored...
-
7 CFR 614.7 - Preliminary technical determinations.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 6 2010-01-01 2010-01-01 false Preliminary technical determinations. 614.7 Section... Preliminary technical determinations. (a) A preliminary technical determination becomes final 30 days after... purpose of gathering additional information and discussing the facts relating to the preliminary technical...
-
A High-Lift Building Block Flow: Turbulent Boundary Layer Relaminarization A Final Report
NASA Technical Reports Server (NTRS)
Bourassa, Corey; Thomas, Flint O.; Nelson, Robert C.
2000-01-01
Experimental evidence exists which suggests turbulent boundary layer relaminarization may play an important role in the inverse Reynolds number effect in high-lift systems. An experimental investigation of turbulent boundary layer relaminarization has been undertaken at the University of Notre Dame's Hessert Center for Aerospace Research in cooperation with NASA Dryden Flight Research Center. A wind tunnel facility has been constructed at the Hessert Center and relaminarization achieved. Preliminary evidence suggests the current predictive tools available are inadequate at determining the onset of relaminarization. In addition, an in-flight relaminarization experiment for the NASA Dryden FTF-II has been designed to explore relaminarization at Mach and Reynolds numbers more typical of commercial high-lift systems.
-
NASA Astrophysics Data System (ADS)
Casanovas, A.; Domingo-Pardo, C.; Guerrero, C.; Lerendegui-Marco, J.; Calviño, F.; Tarifeño-Saldivia, A.; Dressler, R.; Heinitz, S.; Kivel, N.; Quesada, J. M.; Schumann, D.; Aberle, O.; Alcayne, V.; Andrzejewski, J.; Audouin, L.; Bécares, V.; Bacak, M.; Barbagallo, M.; Bečvář, F.; Bellia, G.; Berthoumieux, E.; Billowes, J.; Bosnar, D.; Brown, A.; Busso, M.; Caamaño, M.; Caballero-Ontanaya, L.; Calviani, M.; Cano-Ott, D.; Cerutti, F.; Chen, Y. H.; Chiaveri, E.; Colonna, N.; Cortés, G.; Cortés-Giraldo, M. A.; Cosentino, L.; Cristallo, S.; Damone, L. A.; Diakaki, M.; Dietz, M.; Dupont, E.; Durán, I.; Eleme, Z.; Fernández-Domínguez, B.; Ferrari, A.; Ferreira, P.; Finocchiaro, P.; Furman, V.; Göbel, K.; Gawlik, A.; Gilardoni, S.; Glodariu, T.; Gonçalves, I. F.; González-Romero, E.; Gunsing, F.; Heyse, J.; Jenkins, D. G.; Käppeler, F.; Kadi, Y.; Katabuchi, T.; Kimura, A.; Kokkoris, M.; Kopatch, Y.; Krtička, M.; Kurtulgil, D.; Ladarescu, I.; Lederer-Woods, C.; Meo, S. Lo; Lonsdale, S. J.; Macina, D.; Martínez, T.; Masi, A.; Massimi, C.; Mastinu, P.; Mastromarco, M.; Matteucci, F.; Maugeri, E. A.; Mazzone, A.; Mendoza, E.; Mengoni, A.; Michalopoulou, V.; Milazzo, P. M.; Mingrone, F.; Musumarra, A.; Negret, A.; Nolte, R.; Ogállar, F.; Oprea, A.; Patronis, N.; Pavlik, A.; Perkowski, J.; Persanti, L.; Porras, I.; Praena, J.; Radeck, D.; Ramos, D.; Rauscher, T.; Reifarth, R.; Rochman, D.; Sabaté-Gilarte, M.; Saxena, A.; Schillebeeckx, P.; Simone, S.; Smith, A. G.; Sosnin, N. V.; Stamatopoulos, A.; Tagliente, G.; Tain, J. L.; Talip, T.; Tassan-Got, L.; Tsinganis, A.; Ulrich, J.; Valenta, S.; Vannini, G.; Variale, V.; Vaz, P.; Ventura, A.; Vlachoudis, V.; Vlastou, R.; Wallner, A.; Woods, P. J.; Wright, T.; Žugec, P.; Köster, U.
2018-05-01
The neutron capture cross section of some unstable nuclei is especially relevant for s-process nucleosynthesis studies. This magnitude is crucial to determine the local abundance pattern, which can yield valuable information of the s-process stellar environment. In this work we describe the neutron capture (n,γ) measurement on two of these nuclei of interest, 204Tl and 171Tm, from target production to the final measurement, performed successfully at the n_TOF facility at CERN in 2014 and 2015. Preliminary results on the ongoing experimental data analysis will also be shown. These results include the first ever experimental observation of capture resonances for these two nuclei.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Corradini, Michael; Wu, Qiao
2015-04-30
This report is a preliminary document presenting an overview of the Critical Heat Flux (CHF) phenomenon, the High Pressure Critical Heat Flux facility (HPCHF), preliminary CHF data acquired, and the future direction of the research. The HPCHF facility has been designed and built to study CHF at high pressure and low mass flux ranges in a rod bundle prototypical of conceptual Small Modular Reactor (SMR) designs. The rod bundle is comprised of four electrically heated rods in a 2x2 square rod bundle with a prototypic chopped-cosine axial power profile and equipped with thermocouples at various axial and circumferential positions embeddedmore » in each rod for CHF detection. Experimental test parameters for CHF detection range from pressures of ~80 – 160 bar, mass fluxes of ~400 – 1500 kg/m2s, and inlet water subcooling from ~30 – 70°C. The preliminary data base established will be further extended in the future along with comparisons to existing CHF correlations, models, etc. whose application ranges may be applicable to the conditions of SMRs.« less
-
Surveyor 3 Preliminary Science Results
NASA Technical Reports Server (NTRS)
1967-01-01
Surveyor III soft-landed on the Moon at 00:04 GMT on April 20, 1967. Data obtained have significantly increased our knowledge of the Moon. The Surveyor III spacecraft was similar to Surveyor I; the only major change in scientific instrumentation was the addition of a soil mechanics surface sampler. Surveyor III results at this preliminary evaluation of data give valuable information about the relation between the surface skin of under-dense material responsible for the photometric properties and the deeper layers of material whose properties resemble those of ordinary terrestrial soils. In addition, they provide new insight into the relation between the general lunar surface as seen by Surveyor I and the interior of a large subdued crater. The new results have also contributed to our understanding of the mechanism of downhill transport. Many critical questions cannot, however, be answered until final reduction of experimental data.
-
NASA Astrophysics Data System (ADS)
McMillan, Norman D.; O'Mongain, Eon; Walsh, James E.; Breen, Liam; McMillan, Duncan G.; Power, Michael J.; O'Dea, John P.; Kinsella, Seamus M.; Kelly, Mairead P.; Hammil, Conor; Orr, Dermot
1994-12-01
A preliminary investigation into the use of multiwavelength fiber drop analyzer (FDA) for the measurement of viscosity, spectral absorbance and refractive index is made with a view to obtaining conservative estimates of the instrumental capability of the FDA for these measurands. Some important new insights into drop vibrations are made from studies on the fiber drop traces (FDTs) of mechanically excited damped vibrations in drops with a set volume. A brief description of the feasibility measurements on the first application of the FDA in the diagnosis of disease in synovial fluid is given. Strong experimental evidence is reported for the existence of the surface-guided wave peak of the fiber drop trace and some new insights into the nature of the FDT are suggested based on a comparative study of the FDTs from a multiple-wavelength and a single-wavelength FDA. The earlier reported drop period dependence on applied electric field is critically reexamined, a new interpretation of this effect, is suggested, and an experimental study of clarification is given. Finally, a brief review of the projected capabilities of the FDA based on the work reported here is provided.
-
Seong, Nak Jong; Kim, Bohyoung; Lee, Sungmin; Park, Hee Sun; Kim, Hyuk Jung; Woo, Hyunsik; Kang, Heung-Sik; Lee, Kyoung Ho
2014-07-01
The purpose of this study was to simulate a mobile consultation in patients with inconclusive diagnosis of appendicitis made by on-call radiologists, as well as to measure the diagnostic confidence and performance of the mobile consultation. Two off-site abdominal radiologists interpreted the CT images from 68 patients (including 29 patients with confirmed appendicitis) on a smart-phone for whom the preliminary CT reports by 25 in-house on-call radiologists were inconclusive. The smartphone readings were compared with the preliminary reports by on-call radiologists and with the original final reports by in-house abdominal radiologists. Heat maps, kappa statistics, Wilcoxon signed-rank tests, and ROC curves were used for data analysis. The heat maps and kappa statistics showed that the smartphone readings were more similar to the final reports than to the preliminary reports. In diagnosing or ruling out appendicitis, the smartphone readings were more confident than the preliminary reports (p ≤ 0.01) and did not significantly differ in diagnostic confidence from the final reports (p ≥ 0.19). The AUCs of the smartphone readings (0.91 and 0.92) did not differ significantly from those of the preliminary (0.85) or final (0.97) reports (p ≥ 0.09). With the given study sample, the diagnostic performance of the off-site smartphone readings did not differ significantly from that of the in-house preliminary reports. However, the smartphone readings provided higher diagnostic confidence than the preliminary reports.
-
Title I preliminary engineering for: A. S. E. F. solid waste to methane gas
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1976-01-01
An assignment to provide preliminary engineering of an Advanced System Experimental Facility for production of methane gas from urban solid waste by anaerobic digestion is documented. The experimental facility will be constructed on a now-existing solid waste shredding and landfill facility in Pompano Beach, Florida. Information is included on: general description of the project; justification of basic need; process design; preliminary drawings; outline specifications; preliminary estimate of cost; and time schedules for design and construction of accomplishment of design and construction. The preliminary cost estimate for the design and construction phases of the experimental program is $2,960,000, based on Dec.more » 1975 and Jan. 1976 costs. A time schedule of eight months to complete the Detailed Design, Equipment Procurement and the Award of Subcontracts is given.« less
-
NASA Technical Reports Server (NTRS)
Schiller, David N.
1989-01-01
Science requirements are specified to guide experimental studies of transient heat transfer and fluid flow in an enclosure containing a two-layer gas-and-liquid system heated unevenly from above. Specifications are provided for experiments in three separate settings: (1) a normal gravity laboratory, (2) the NASA-LeRC Drop towers, and (3) a space-based laboratory (e.g., Shuttle, Space Station). A rationale is developed for both minimum and desired requirement levels. The principal objective of the experimental effort is to validate a computational model of the enclosed liquid fuel pool during the preignition phase and to determine via measurement the role of gravity on the behavior of the system. Preliminary results of single-phase normal gravity experiments and simulations are also presented.
-
Code of Federal Regulations, 2010 CFR
2010-07-01
... materials investigations, surveys, and tests; (6) Preliminary and final designs; (7) Preliminary and final... surveys to establish line and grade for the work, to control the work, and to measure quantities; (2... battery-powered, that is designed solely for use by a mobility-impaired person for locomotion, and that is...
-
Code of Federal Regulations, 2014 CFR
2014-07-01
... materials investigations, surveys, and tests; (6) Preliminary and final designs; (7) Preliminary and final... surveys to establish line and grade for the work, to control the work, and to measure quantities; (2... battery-powered, that is designed solely for use by a mobility-impaired person for locomotion, and that is...
-
Code of Federal Regulations, 2012 CFR
2012-07-01
... materials investigations, surveys, and tests; (6) Preliminary and final designs; (7) Preliminary and final... surveys to establish line and grade for the work, to control the work, and to measure quantities; (2... battery-powered, that is designed solely for use by a mobility-impaired person for locomotion, and that is...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-11
... Brazil: Final Results of Antidumping Duty Administrative Review AGENCY: Import Administration... Commerce (the Department) published the preliminary results of its administrative review of the antidumping.... We gave interested parties an opportunity to comment on our preliminary results. We received no...
-
NASA Astrophysics Data System (ADS)
Valente, T.; Bartuli, C.; Sebastiani, M.; Loreto, A.
2005-12-01
The experimental measurement of residual stresses originating within thick coatings deposited by thermal spray on solid substrates plays a role of fundamental relevance in the preliminary stages of coating design and process parameters optimization. The hole-drilling method is a versatile and widely used technique for the experimental determination of residual stress in the most superficial layers of a solid body. The consolidated procedure, however, can only be implemented for metallic bulk materials or for homogeneous, linear elastic, and isotropic materials. The main objective of the present investigation was to adapt the experimental method to the measurement of stress fields built up in ceramic coatings/metallic bonding layers structures manufactured by plasma spray deposition. A finite element calculation procedure was implemented to identify the calibration coefficients necessary to take into account the elastic modulus discontinuities that characterize the layered structure through its thickness. Experimental adjustments were then proposed to overcome problems related to the low thermal conductivity of the coatings. The number of calculation steps and experimental drilling steps were finally optimized.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-29
... Standard Pipe from Turkey: Final Results of Countervailing Duty Administrative Review AGENCY: Import... Department of Commerce (the Department) published in the Federal Register its preliminary results of... Carbon Steel Standard Pipe From Turkey: Preliminary Results of Countervailing Duty Administrative Review...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-19
... Fiber From Taiwan: Final Results of Antidumping Duty Administrative Review AGENCY: Import Administration... Commerce published the preliminary results of the administrative review of the antidumping duty order on.... We gave interested parties an opportunity to comment on the preliminary results. We received comments...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-08
... and Countervailing Duty Orders on Certain Pasta From Italy: Affirmative Preliminary Determinations of Circumvention of Antidumping and Countervailing Duty Orders, 68 FR 46571, 46575 (August 6, 2003) (Pasta... Orders on Certain Pasta From Italy: Affirmative Final Determinations of Circumvention of Antidumping and...
-
Study and design of cryogenic propellant acquisition systems. Volume 1: Design studies
NASA Technical Reports Server (NTRS)
Burge, G. W.; Blackmon, J. B.
1973-01-01
An in-depth study and selection of practical propellant surface tension acquisition system designs for two specific future cryogenic space vehicles, an advanced cryogenic space shuttle auxiliary propulsion system and an advanced space propulsion module is reported. A supporting laboratory scale experimental program was also conducted to provide design information critical to concept finalization and selection. Designs using localized pressure isolated surface tension screen devices were selected for each application and preliminary designs were generated. Based on these designs, large scale acquisition prototype hardware was designed and fabricated to be compatible with available NASA-MSFC feed system hardware.
-
NASA Astrophysics Data System (ADS)
Pini, Roberto; Ratto, Fulvio; Matteini, Paolo; Centi, Sonia; Rossi, Francesca
2010-04-01
We review our experimental studies on near infrared laser-activated gold nanoparticles in the direct welding of connective tissues. In particular, we discuss the use of gold nanorods excited by diode laser radiation at 810 nm to mediate functional photothermal effects and weld eye's lens capsules and arteries. The preparation of biopolymeric matrices including gold nanorods is described as well, together with preliminary tests for their application in the closure of wounds in vessels and tendons. Finally we mention future perspectives on the use of these nanoparticles for applications in the therapy of cancer.
-
Computer modeling of heat pipe performance
NASA Technical Reports Server (NTRS)
Peterson, G. P.
1983-01-01
A parametric study of the defining equations which govern the steady state operational characteristics of the Grumman monogroove dual passage heat pipe is presented. These defining equations are combined to develop a mathematical model which describes and predicts the operational and performance capabilities of a specific heat pipe given the necessary physical characteristics and working fluid. Included is a brief review of the current literature, a discussion of the governing equations, and a description of both the mathematical and computer model. Final results of preliminary test runs of the model are presented and compared with experimental tests on actual prototypes.
-
The saga of bottom production in pp-bar collisions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mangano, Michelangelo L.
2005-03-22
I review here the history of bottom quark cross section measurements and theoretical predictions. Starting form the early days of UA1, and going through the sequence of the large excesses reported during run 0 and I at the Tevatron by CDF and D0, I summarize how both data and theory have evolved in time, thanks to improved experimental techniques, more data, and improved control over the main ingredients of the theoretical calculations. I conclude with the discussion of the preliminary data from run II, which appear to finally give a satisfactory picture of the data vs theory comparison.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-07
... Citrate Salts From Canada: Preliminary Results of Antidumping Duty Administrative Review AGENCY: Import... below normal value (NV). If the preliminary results are adopted in the final results of the... all appropriate entries. Interested parties are invited to comment on the preliminary results. FOR...
-
NASA Technical Reports Server (NTRS)
1976-01-01
The following areas related to the final definition and preliminary design study of the initial atmospheric cloud physics laboratory (ACPL) were covered: (1) proposal organization, personnel, schedule, and project management, (2) proposed configurations, (3) study objectives, (4) ACPL experiment program listing and description, (5) mission/flight flexibility and modularity/commonality, (6) study plan, and (7) description of following tasks: requirement analysis and definition task flow, systems analysis and trade studies, subsystem analysis and trade studies, specifications and interface control documents, preliminary design task flow, work breakdown structure, programmatic analysis and planning, and project costs. Finally, an overview of the scientific requirements was presented.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-03
... Bags From Thailand: Extension of Time Limit for the Final Results of the Antidumping Duty... preliminary results of review of the antidumping duty order on polyethylene retail carrier bags from Thailand. See Polyethylene Retail Carrier Bags From Thailand: Preliminary Results of Antidumping Duty...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-28
... Pipes and Tubes From Thailand: Final Results of Antidumping Duty New Shipper Review AGENCY: Import... Thailand. See Circular Welded Carbon Steel Pipes and Tubes from Thailand: Preliminary Results of... review under the antidumping duty order covering pipes and tubes from Thailand. See Preliminary Results...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-05
... Fiber From Taiwan: Final Results of Antidumping Duty Administrative Review AGENCY: Import Administration... published the preliminary results of the administrative review of the antidumping duty order on certain... interested parties an opportunity to comment on the preliminary results, but we received no comments. The...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-14
... Pipes and Tubes From Taiwan: Final Results of Antidumping Duty Administrative Review AGENCY: Import... Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on circular welded carbon steel pipes and tubes from Taiwan. See Preliminary Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-26
... From the People's Republic of China: Final Rescission of Antidumping Duty New Shipper Review; 2011-2012... preliminary rescission of this new shipper review (NSR) of Shandong Yinfeng Rare Fungus Corporation Ltd... Preserved Mushrooms from the People's Republic of China: Preliminary Rescission of Antidumping Duty New...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-04
... DEPARTMENT OF COMMERCE International Trade Administration A-357-812 Honey from Argentina: Final... review of the antidumping duty order on honey from Argentina. See Honey from Argentina: Preliminary... preliminary results of the administrative review of the antidumping duty order on honey from Argentina for the...
-
A Novel Mittag-Leffler Kernel Based Hybrid Fault Diagnosis Method for Wheeled Robot Driving System.
Yuan, Xianfeng; Song, Mumin; Zhou, Fengyu; Chen, Zhumin; Li, Yan
2015-01-01
The wheeled robots have been successfully applied in many aspects, such as industrial handling vehicles, and wheeled service robots. To improve the safety and reliability of wheeled robots, this paper presents a novel hybrid fault diagnosis framework based on Mittag-Leffler kernel (ML-kernel) support vector machine (SVM) and Dempster-Shafer (D-S) fusion. Using sensor data sampled under different running conditions, the proposed approach initially establishes multiple principal component analysis (PCA) models for fault feature extraction. The fault feature vectors are then applied to train the probabilistic SVM (PSVM) classifiers that arrive at a preliminary fault diagnosis. To improve the accuracy of preliminary results, a novel ML-kernel based PSVM classifier is proposed in this paper, and the positive definiteness of the ML-kernel is proved as well. The basic probability assignments (BPAs) are defined based on the preliminary fault diagnosis results and their confidence values. Eventually, the final fault diagnosis result is archived by the fusion of the BPAs. Experimental results show that the proposed framework not only is capable of detecting and identifying the faults in the robot driving system, but also has better performance in stability and diagnosis accuracy compared with the traditional methods.
-
A Novel Mittag-Leffler Kernel Based Hybrid Fault Diagnosis Method for Wheeled Robot Driving System
Yuan, Xianfeng; Song, Mumin; Chen, Zhumin; Li, Yan
2015-01-01
The wheeled robots have been successfully applied in many aspects, such as industrial handling vehicles, and wheeled service robots. To improve the safety and reliability of wheeled robots, this paper presents a novel hybrid fault diagnosis framework based on Mittag-Leffler kernel (ML-kernel) support vector machine (SVM) and Dempster-Shafer (D-S) fusion. Using sensor data sampled under different running conditions, the proposed approach initially establishes multiple principal component analysis (PCA) models for fault feature extraction. The fault feature vectors are then applied to train the probabilistic SVM (PSVM) classifiers that arrive at a preliminary fault diagnosis. To improve the accuracy of preliminary results, a novel ML-kernel based PSVM classifier is proposed in this paper, and the positive definiteness of the ML-kernel is proved as well. The basic probability assignments (BPAs) are defined based on the preliminary fault diagnosis results and their confidence values. Eventually, the final fault diagnosis result is archived by the fusion of the BPAs. Experimental results show that the proposed framework not only is capable of detecting and identifying the faults in the robot driving system, but also has better performance in stability and diagnosis accuracy compared with the traditional methods. PMID:26229526
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-26
..., 2011, the Department issued its Post-Preliminary Analysis of Cross-ownership and its Post- Preliminary Analysis of New Subsidy Allegations. On that date, the Department also issued its Post-Preliminary Analysis... Post-Preliminary Analysis: GOK Preferential Lending Under the Daewoo Workout, and the GOK, LGE, SEC...
-
In-pile testing of ITER first wall mock-ups at relevant thermal loading conditions
NASA Astrophysics Data System (ADS)
Litunovsky, N.; Gervash, A.; Lorenzetto, P.; Mazul, I.; Melder, R.
2009-04-01
The paper describes the experimental technique and preliminary results of thermal fatigue testing of ITER first wall (FW) water-cooled mock-ups inside the core of the RBT-6 experimental fission reactor (RIAR, Dimitrovgrad, Russia). This experiment has provided simultaneous effect of neutron fluence and thermal cycling damages on the mock-ups. A PC-controlled high-temperature graphite ohmic heater was applied to provide cyclic thermal load onto the mock-ups surface. This experiment lasted for 309 effective irradiation days with a final damage level (CuCrZr) of 1 dpa in the mock-ups. About 3700 thermal cycles with a heat flux of 0.4-0.5 MW/m 2 onto the mock-ups were realized before the heater fails. Then, irradiation was continued in a non-cycling mode.
-
Neutron capture on short-lived nuclei via the surrogate (d,pγ) reaction
NASA Astrophysics Data System (ADS)
Cizewski, Jolie A.; Ratkiewicz, Andrew
2018-05-01
Rapid r-process nucleosynthesis is responsible for the creation of about half of the elements heavier than iron. Neutron capture on shortlived nuclei in cold processes or during freeze out from hot processes can have a significant impact on the final observed r-process abundances. We are validating the (d,pγ) reaction as a surrogate for neutron capture with measurements on 95Mo targets and a focus on discrete transitions. The experimental results have been analyzed within the Hauser-Feshbach approach with non-elastic breakup of the deuteron providing a neutron to be captured. Preliminary results support the (d,pγ) reaction as a valid surrogate for neutron capture. We are poised to measure the (d,pγ) reaction in inverse kinematics with unstable beams following the development of the experimental techniques.
-
Swinging Atwood Machine: Experimental and numerical results, and a theoretical study
NASA Astrophysics Data System (ADS)
Pujol, O.; Pérez, J. P.; Ramis, J. P.; Simó, C.; Simon, S.; Weil, J. A.
2010-06-01
A Swinging Atwood Machine ( SAM) is built and some experimental results concerning its dynamic behaviour are presented. Experiments clearly show that pulleys play a role in the motion of the pendulum, since they can rotate and have non-negligible radii and masses. Equations of motion must therefore take into account the moment of inertia of the pulleys, as well as the winding of the rope around them. Their influence is compared to previous studies. A preliminary discussion of the role of dissipation is included. The theoretical behaviour of the system with pulleys is illustrated numerically, and the relevance of different parameters is highlighted. Finally, the integrability of the dynamic system is studied, the main result being that the machine with pulleys is non-integrable. The status of the results on integrability of the pulley-less machine is also recalled.
-
Constitutive formulations for the mechanical investigation of colonic tissues.
Carniel, Emanuele Luigi; Gramigna, Vera; Fontanella, Chiara Giulia; Stefanini, Cesare; Natali, Arturo N
2014-05-01
A constitutive framework is provided for the characterization of the mechanical behavior of colonic tissues, as a fundamental tool for the development of numerical models of the colonic structures. The constitutive analysis is performed by a multidisciplinary approach that requires the cooperation between experimental and computational competences. The preliminary investigation pertains to the review of the tissues histology. The complex structural configuration of the tissues and the specific distributions of fibrous elements entail the nonlinear mechanical behavior and the anisotropic response. The identification of the mechanical properties requires to perform mechanical tests according to different loading situations, as different loading directions. Because of the typical functionality of colon structures, the tissues mechanics is investigated by tensile tests, which are performed on taenia coli and haustra specimens from fresh pig colons. Accounting for the histological investigation and the results from the mechanical tests, a specific hyperelastic framework is provided within the theory of fiber-reinforced composite materials. Preliminary analytical formulations are defined to identify the constitutive parameters by the inverse analysis of the experimental tests. Finite element models of the specimens are developed accounting for the actual configuration of the colon structures to verify the quality of the results. The good agreement between experimental and numerical model results suggests the reliability of the constitutive formulations and parameters. Finally, the developed constitutive analysis makes it possible to identify the mechanical behavior and properties of the different colonic tissues. Copyright © 2013 Wiley Periodicals, Inc.
-
Physical Test Prototypes Based on Microcontroller
NASA Astrophysics Data System (ADS)
Paramitha, S. T.
2017-03-01
The purpose of this study was to produce a prototype of a physical test-based microcontroller. The research method uses the research and development of the Borg and gall. The procedure starts from the study; research and information collecting, planning, develop preliminary form of product, preliminary field testing, main product revision, playing field testing, operational product revision, field operational testing, final product revision, dissemination and implementation. Validation of the product, obtained through expert evaluation; test products of small scale and large scale; effectiveness test; evaluation of respondents. The results showed that the eligibility assessment of prototype products based physical tests microcontroller. Based on the ratings of seven experts showed that 87% included in the category of “very good” and 13% included in the category of “good”. While the effectiveness of the test results showed that 1). The results of the experimental group to test sit-ups increase by 40% and the control group by 15%. 2). The results of the experimental group to test push-ups increased by 30% and the control group by 10%. 3). The results of the experimental group to test the Back-ups increased by 25% and the control group by 10%. With a significant value of 0.002 less than 0.05, product means a physical test prototype microcontroller based, proven effective in improving the results of physical tests. Conclusions and recommendations; Product physical microcontroller-based assays, can be used to measure the physical tests of pushups, sit ups, and back-ups.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-20
... comment on these preliminary results. DATES: Effective Date: December 20, 2013. FOR FURTHER INFORMATION... Administrative Review; 2009-2010, 78 FR 11143, 11144 (February 15, 2013) (1st Review Final), and Diamond... Administrative Review; 2010-2011, 78 FR 36166 (June 17, 2013) (2nd Review Final), and the accompanying Issues and...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-10
... Film, Sheet, and Strip From Taiwan: Extension of Time Limit for Final Results of the Antidumping Duty... preliminary results of this review. See Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan... Results and to issue a post-preliminary analysis regarding whether to use an alternate cost methodology...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-04
... Pipe and Tube from Turkey; Notice of Final Results of Antidumping Duty Administrative Review AGENCY... Tube from Turkey. See Light-Walled Rectangular Pipe and Tube from Turkey; Notice of Preliminary Results... pipe and tube from Turkey. See Preliminary Results. The parties subject to this review are Tos[ccedil...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-12
... Atlantic Salmon From Norway: Extension of Time Limits for Preliminary and Final Results of Full Third... countervailing duty (CVD) orders on fresh and chilled Atlantic salmon from Norway, pursuant to section 751(c) of... Salmon U.S., Inc. (Phoenix Salmon), a domestic interested party. Phoenix Salmon claimed interested party...
-
NASA Technical Reports Server (NTRS)
1981-01-01
The preliminary grant assessed the use of laboratory experiments for simulating low g liquid drop experiments in the space shuttle environment. Investigations were begun of appropriate immiscible liquid systems, design of experimental apparatus and analyses. The current grant continued these topics, completed construction and preliminary testing of the experimental apparatus, and performed experiments on single and compound liquid drops. A continuing assessment of laboratory capabilities, and the interests of project personnel and available collaborators, led to, after consultations with NASA personnel, a research emphasis specializing on compound drops consisting of hollow plastic or elastic spheroids filled with liquids.
-
NASA Technical Reports Server (NTRS)
Alvarez, L. S.; Moore, M.; Veruttipong, W.; Andres, E.
1994-01-01
The design and implementation of an antenna beam-waveguide (BWG) mirror position control system at the DSS-13 34-m antenna is presented. While it has several potential applications, a positioner on the last flat-plate BWG mirror (M6) at DSS 13 is installed to demonstrate the conical scan (conscan) angle-tracking technique at the Ka-band (32-GHz) operating frequency. Radio frequency (RF) beam-scanning predictions for the M6 mirror, computed from a diffraction analysis, are presented. From these predictions, position control system requirements are then derived. The final mechanical positioner and servo system designs, as implemented at DSS 13, are illustrated with detailed design descriptions given in the appendices. Preliminary measurements of antenna Ka-band beam scan versus M6 mirror tilt made at DSS 13 in December 1993 are presented. After reduction, the initial measurements are shown to be in agreement with the RF predicts. Plans for preliminary conscan experimentation at DSS 13 are summarized.
-
Correlated stopping, proton clusters and higher order proton cumulants
Bzdak, Adam; Koch, Volker; Skokov, Vladimir
2017-05-05
Here, we investigate possible effects of correlations between stopped nucleons on higher order proton cumulants at low energy heavy-ion collisions. We find that fluctuations of the number of wounded nucleons N part lead to rather nontrivial dependence of the correlations on the centrality; however, this effect is too small to explain the large and positive four-proton correlations found in the preliminary data collected by the STAR collaboration at √s = 7.7 GeV. We further demonstrate that, by taking into account additional proton clustering, we are able to qualitatively reproduce the preliminary experimental data. We speculate that this clustering may originatemore » either from collective/multi-collision stopping which is expected to be effective at lower energies or from a possible first-order phase transition, or from (attractive) final state interactions. To test these ideas we propose to measure a mixed multi-particle correlation between stopped protons and a produced particle (e.g. pion, antiproton).« less
-
Efficient Process Migration for Parallel Processing on Non-Dedicated Networks of Workstations
NASA Technical Reports Server (NTRS)
Chanchio, Kasidit; Sun, Xian-He
1996-01-01
This paper presents the design and preliminary implementation of MpPVM, a software system that supports process migration for PVM application programs in a non-dedicated heterogeneous computing environment. New concepts of migration point as well as migration point analysis and necessary data analysis are introduced. In MpPVM, process migrations occur only at previously inserted migration points. Migration point analysis determines appropriate locations to insert migration points; whereas, necessary data analysis provides a minimum set of variables to be transferred at each migration pint. A new methodology to perform reliable point-to-point data communications in a migration environment is also discussed. Finally, a preliminary implementation of MpPVM and its experimental results are presented, showing the correctness and promising performance of our process migration mechanism in a scalable non-dedicated heterogeneous computing environment. While MpPVM is developed on top of PVM, the process migration methodology introduced in this study is general and can be applied to any distributed software environment.
-
Preliminary experiments on pharmacokinetic diffuse fluorescence tomography of CT-scanning mode
NASA Astrophysics Data System (ADS)
Zhang, Yanqi; Wang, Xin; Yin, Guoyan; Li, Jiao; Zhou, Zhongxing; Zhao, Huijuan; Gao, Feng; Zhang, Limin
2016-10-01
In vivo tomographic imaging of the fluorescence pharmacokinetic parameters in tissues can provide additional specific and quantitative physiological and pathological information to that of fluorescence concentration. This modality normally requires a highly-sensitive diffuse fluorescence tomography (DFT) working in dynamic way to finally extract the pharmacokinetic parameters from the measured pharmacokinetics-associated temporally-varying boundary intensity. This paper is devoted to preliminary experimental validation of our proposed direct reconstruction scheme of instantaneous sampling based pharmacokinetic-DFT: A highly-sensitive DFT system of CT-scanning mode working with parallel four photomultiplier-tube photon-counting channels is developed to generate an instantaneous sampling dataset; A direct reconstruction scheme then extracts images of the pharmacokinetic parameters using the adaptive-EKF strategy. We design a dynamic phantom that can simulate the agent metabolism in living tissue. The results of the dynamic phantom experiments verify the validity of the experiment system and reconstruction algorithms, and demonstrate that system provides good resolution, high sensitivity and quantitativeness at different pump speed.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-23
... Germany: Extension of Time Limits for Preliminary and Final Results of Full Third Five-Year (``Sunset... a full sunset review of the antidumping duty order on brass sheet and strip from Germany. See... and Strip from Germany'' (June 7, 2011). Extension of Time Limits In accordance with section 751(c)(5...
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Eggers, P.E.
1975-03-01
An analytical study has been performed to assess the feasibility of using aerodynamically heated thermoelectric convertors to power RF proximity fuzes. The collective results of this study indicate that such a thermoelectric power supply is feasible for use with 20 mm projectiles and is compatible with the existing RF fuze circuit and safe arming distance requirements. A disc module concept has evolved from this study involving thin-film bismuth telluride as the basic thermoelectric element. Preliminary experimental studies were completed in order to identify principal parameters for the bismuth telluride.
-
NASA Astrophysics Data System (ADS)
Alturki, Uthman T.
The goal of this research was to research, design, and develop a hypertext program for students who study biology. The Ecology Hypertext Program was developed using Research and Development (R&D) methodology. The purpose of this study was to place the final "product", a CD-ROM for learning biology concepts, in the hands of teachers and students to help them in learning and teaching process. The product was created through a cycle of literature review, needs assessment, development, and a cycle of field tests and revisions. I applied the ten steps of R&D process suggested by Borg and Gall (1989) which, consisted of: (1) Literature review, (2) Needs assessment, (3) Planning, (4) Develop preliminary product, (5) Preliminary field-testing, (6) Preliminary revision, (7) Main field-testing, (8) Main revision, (9) Final field-testing, and (10) Final product revision. The literature review and needs assessment provided a support and foundation for designing the preliminary product---the Ecology Hypertext Program. Participants in the needs assessment joined a focus group discussion. They were a group of graduate students in education who suggested the importance for designing this product. For the preliminary field test, the participants were a group of high school students studying biology. They were the potential user of the product. They reviewed the preliminary product and then filled out a questionnaire. Their feedback and suggestions were used to develop and improve the product in a step called preliminary revision. The second round of field tasting was the main field test in which the participants joined a focus group discussion. They were the same group who participated in needs assessment task. They reviewed the revised product and then provided ideas and suggestions to improve the product. Their feedback were categorized and implemented to develop the product as in the main revision task. Finally, a group of science teachers participated in this study by reviewing the product and then filling out the questionnaire. Their suggestions were used to conduct the final step in R&D methodology, the final product revision. The primary result of this study was the Ecology Hypertext Program. It considered a small attempt to give students an opportunity to learn through an interactive hypertext program. In addition, using the R&D methodology was an ideal procedure for designing and developing new educational products and material.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-21
...The Department of Commerce (``the Department'') published the Preliminary Results of the eighth administrative review and aligned new shipper reviews on certain frozen fish fillets from the Socialist Republic of Vietnam (``Vietnam'') on September 12, 2012.\\1\\ We gave interested parties an opportunity to comment on the Preliminary Results. Based upon our analysis of the comments and information received, we made changes to the margin calculations for these final results. The final dumping margins are listed below in the ``Final Results of the Administrative Reviews'' section of this notice. The period of review (``POR'') is August 1, 2010, through July 31, 2011. ---------------------------------------------------------------------------
-
The boundary vector cell model of place cell firing and spatial memory
Barry, Caswell; Lever, Colin; Hayman, Robin; Hartley, Tom; Burton, Stephen; O'Keefe, John; Jeffery, Kate; Burgess, Neil
2009-01-01
We review evidence for the boundary vector cell model of the environmental determinants of the firing of hippocampal place cells. Preliminary experimental results are presented concerning the effects of addition or removal of environmental boundaries on place cell firing and evidence that boundary vector cells may exist in the subiculum. We review and update computational simulations predicting the location of human search within a virtual environment of variable geometry, assuming that boundary vector cells provide one of the input representations of location used in mammalian spatial memory. Finally, we extend the model to include experience-dependent modification of connection strengths through a BCM-like learning rule, and compare the effects to experimental data on the firing of place cells under geometrical manipulations to their environment. The relationship between neurophysiological results in rats and spatial behaviour in humans is discussed. PMID:16703944
-
Theoretical Studies of Liquid He-4 Near the Superfluid Transition
NASA Technical Reports Server (NTRS)
Manousakis, Efstratios
2002-01-01
We performed theoretical studies of liquid helium by applying state of the art simulation and finite-size scaling techniques. We calculated universal scaling functions for the specific heat and superfluid density for various confining geometries relevant for experiments such as the confined helium experiment and other ground based studies. We also studied microscopically how the substrate imposes a boundary condition on the superfluid order parameter as the superfluid film grows layer by layer. Using path-integral Monte Carlo, a quantum Monte Carlo simulation method, we investigated the rich phase diagram of helium monolayer, bilayer and multilayer on a substrate such as graphite. We find excellent agreement with the experimental results using no free parameters. Finally, we carried out preliminary calculations of transport coefficients such as the thermal conductivity for bulk or confined helium systems and of their scaling properties. All our studies provide theoretical support for various experimental studies in microgravity.
-
Theory and Experimental Program for p-B11 Fusion with the Dense Plasma Focus
NASA Astrophysics Data System (ADS)
Lerner, Eric J.; Krupakar Murali, S.; Haboub, A.
2011-10-01
Lawrenceville Plasma Physics Inc. has initiated a 2-year-long experimental project to test the scientific feasibility of achieving controlled fusion using the dense plasma focus (DPF) device with hydrogen-boron (p-B11) fuel. The goals of the experiment are: first, to confirm the achievement of high ion and electron energies observed in previous experiments from 2001; second, to greatly increase the efficiency of energy transfer into the plasmoid where the fusion reactions take place; third, to achieve the high magnetic fields (>1 GG) needed for the quantum magnetic field effect, which will reduce cooling of the plasma by X-ray emission; and finally, to use p-B11 fuel to demonstrate net energy gain. The experiments are being conducted with a newly constructed dense plasma focus in Middlesex, NJ which is expected to generate peak currents in excess of 2 MA. Some preliminary results are reported.
-
[Use of tissue engineering in the reconstruction of flexor tendon injuries of the hand].
Bíró, Vilmos
2015-02-08
In his literary analysis, the author describes a novel method applied in the reconstruction of flexor tendon injuries of the hand. This procedure is named tissue engineering, and it is examined mainly under experimental circumstances. After definition of the method and descriptions of literary preliminaries the author discusses the healing process of the normal tendon tissue, then development of the scaffold, an important step of tissue engineering is described. After these topics the introduction of the pluripotent mesenchymal stem cells into the scaffold, and proliferation of these cells and development of the sliding systems are presented. The mechanical resisting ability of the formed tendon tissue is also discussed. Finally, the author concludes that as long as results of experimental research cannot be successfully applied into clinical practice, well-tried tendon reconstruction operations and high quality postoperative rehabilitation are needed.
-
76 FR 2655 - Honey From Argentina: Preliminary Results of Antidumping Duty Administrative Review
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-14
...: Preliminary Results of Antidumping Duty Administrative Review AGENCY: Import Administration, International... S.A. (CIPSA), or Patagonik S.A. (Patagonik) during the POR. If these preliminary results are adopted in our final results of administrative review, we will issue appropriate assessment instructions to U...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-22
... Carboxymethylcellulose from the Netherlands; Preliminary Results of Antidumping Duty Administrative Review AGENCY: Import... Chemicals B.V. were made at less than normal value during the period of review. If these preliminary results are adopted in our final results of administrative review, we will issue appropriate assessment...
-
Measurement of splanchnic photoplethysmographic signals using a new reflectance fiber optic sensor
NASA Astrophysics Data System (ADS)
Hickey, Michelle; Samuels, Neal; Randive, Nilesh; Langford, Richard M.; Kyriacou, Panayiotis A.
2010-03-01
Splanchnic organs are particularly vulnerable to hypoperfusion. Currently, there is no technique that allows for the continuous estimation of splanchnic blood oxygen saturation (SpO2). As a preliminary to developing a suitable splanchnic SpO2 sensor, a new reflectance fiber optic photoplethysmographic (PPG) sensor and processing system are developed. An experimental procedure to examine the effect of fiber source detector separation distance on acquired PPG signals is carried out before finalizing the sensor design. PPG signals are acquired from four volunteers for separation distances of 1 to 8 mm. The separation range of 3 to 6 mm provides the best quality PPG signals with large amplitudes and the highest signal-to-noise ratios (SNRs). Preliminary calculation of SpO2 shows that distances of 3 and 4 mm provide the most realistic values. Therefore, it is suggested that the separation distance in the design of a fiber optic reflectance pulse oximeter be in the range of 3 to 4 mm. Preliminary PPG signals from various splanchnic organs and the periphery are obtained from six anaesthetized patients. The normalized amplitudes of the splanchnic PPGs are, on average, approximately the same as those obtained simultaneously from the periphery. These observations suggest that fiber optic pulse oximetry may be a valid monitoring technique for splanchnic organs.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-06
... Russian Federation: Preliminary Results of Antidumping Duty Administrative Review AGENCY: Import... AVISMA did not make sales to the United States at less than normal value. If these preliminary results are adopted in the final results of this administrative review, we will instruct U.S. Customs and...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-08
... DEPARTMENT OF COMMERCE International Trade Administration [A-583-008] Preliminary Results of... Enterprise Co., Ltd. (Yieh Phui) have been made below normal value (NV). If these preliminary results are adopted in our final results, we will instruct U.S. Customs and Border Protection (CBP) to assess...
-
O'Connell, Timothy; Chang, Debra
2012-01-01
While on call, radiology residents review imaging studies and issue preliminary reports to referring clinicians. In the absence of an integrated reporting system at the training sites of the authors' institution, residents were typing and faxing preliminary reports. To partially automate the on-call resident workflow, a Web-based system for resident reporting was developed by using the free open-source xAMP Web application framework and an open-source DICOM (Digital Imaging and Communications in Medicine) software toolkit, with the goals of reducing errors and lowering barriers to education. This reporting system integrates with the picture archiving and communication system to display a worklist of studies. Patient data are automatically entered in the preliminary report to prevent identification errors and simplify the report creation process. When the final report for a resident's on-call study is available, the reporting system queries the report broker for the final report, and then displays the preliminary report side by side with the final report, thus simplifying the review process and encouraging review of all of the resident's reports. The xAMP Web application framework should be considered for development of radiology department informatics projects owing to its zero cost, minimal hardware requirements, ease of programming, and large support community.
-
NASA Technical Reports Server (NTRS)
Goldhirsh, Julius; Vogel, Wolfhard J.
1991-01-01
We present an overview of the contents of the text having the above title and which is now in the form of a preliminary document titled, 'Propagation Handbook for Land-Mobile-Satellite Systems-Preliminary.' At this writing the text is undergoing peer review, and the final revised manuscript will be published in the near future as a NASA document. The text was inspired by a series of Land-Mobile-Satellite System (LMSS) experiments by the authors and other investigators at UHF and L-Band. The rationale for its writing is to place in a single document an overview of the previous propagation related salient experimental and modeling results pertaining to LMSS scenarios. It is apparent that LMSS propagation at UHF and L-Band can be seriously degraded because of attenuation (e.g., greater than 10 dB) caused by roadside tree shadowing. The extent of attenuation is shown to depend on such factors at the elevation angle to the satellite, the bearing of the line-of-signt path to the satellite relative to the line of roadside trees, the side of the road in which the vehicle is driven, the season, and the frequency. Multipath effects during line-of-sight communications are shown to cause less serious fading (e.g., smaller than 3 dB for 90 percent of the driving distance).
-
Medical image registration based on normalized multidimensional mutual information
NASA Astrophysics Data System (ADS)
Li, Qi; Ji, Hongbing; Tong, Ming
2009-10-01
Registration of medical images is an essential research topic in medical image processing and applications, and especially a preliminary and key step for multimodality image fusion. This paper offers a solution to medical image registration based on normalized multi-dimensional mutual information. Firstly, affine transformation with translational and rotational parameters is applied to the floating image. Then ordinal features are extracted by ordinal filters with different orientations to represent spatial information in medical images. Integrating ordinal features with pixel intensities, the normalized multi-dimensional mutual information is defined as similarity criterion to register multimodality images. Finally the immune algorithm is used to search registration parameters. The experimental results demonstrate the effectiveness of the proposed registration scheme.
-
Biocides Steering Group on human exposure assessment: a preliminary report.
van Hemmen, J J
1999-06-30
In a project granted by DG XI of the European Commission, it is attempted to collate experimental and theoretical data on human (workers and consumers) exposure assessment to biocidal products, and to outline the methodology for sampling and measurement. On the basis of the available evidence, approaches are presented for the exposure assessment to be used for estimation of risks in authorization procedures under the recently accepted Directive 98/8/EC. Gaps in knowledge are indicated, making it possible to study the issues involved in a comprehensive and cost-effective way. Some recommendations are given on how to best do this. The current project has been detailed in a final report.
-
NASA Technical Reports Server (NTRS)
Groot, J. S.
1990-01-01
In August 1989 the NASA/JPL airborne P/L/C-band DC-8 SAR participated in several remote sensing campaigns in Europe. Amongst other test sites, data were obtained of the Flevopolder test site in the Netherlands on August the 16th. The Dutch X-band SLAR was flown on the same date and imaged parts of the same area as the SAR. To calibrate the two imaging radars a set of 33 calibration devices was deployed. 16 trihedrals were used to calibrate a part of the SLAR data. This short paper outlines the X-band SLAR characteristics, the experimental set-up and the calibration method used to calibrate the SLAR data. Finally some preliminary results are given.
-
Evaluation of MPLM Design and Mission 6A Coupled Loads Analyses
NASA Technical Reports Server (NTRS)
Bookout, Paul S.; Ricks, Ed
1999-01-01
Through the development of a space shuttle payload, there are usually several coupled loads analyses (CLA) performed: preliminary design, critical design, final design and verification loads analysis (VLA). A final design CLA is the last analysis conducted prior to model delivery to the shuttle program for the VLA. The finite element models used in the final design CLA and the VLA are test verified dynamic math models. Mission 6A is the first of many flights of the Multi-Purpose Logistics Module (MPLM). The MPLM was developed by Alenia Spazio S.p.A. (an Italian aerospace company) and houses the International Standard Payload Racks (ISPR) for transportation to the space station in the shuttle. Marshall Space Flight Center (MSFC), the payload integrator of the MPLM for Mission 6A, performed the final design CLA using the M6.OZC shuttle data for liftoff and landing conditions using the proper shuttle cargo manifest. Alenia performed the preliminary and critical design CLAs for the development of the MPLM. However, these CLAs did not use the current Mission 6A cargo manifest. An evaluation of the preliminary and critical design performed by Alenia and the final design performed by MSFC is presented.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-27
... From the Socialist Republic of Vietnam: Preliminary Results of New Shipper Review AGENCY: Import...'') of August 1, 2008, through January 31, 2009. If these preliminary results are adopted in our final results of review, we will instruct U.S. Customs and Border Protection (``CBP'') to assess antidumping...
-
Internal aerodynamics of a generic three-dimensional scramjet inlet at Mach 10
NASA Technical Reports Server (NTRS)
Holland, Scott D.
1995-01-01
A combined computational and experimental parametric study of the internal aerodynamics of a generic three-dimensional sidewall compression scramjet inlet configuration at Mach 10 has been performed. The study was designed to demonstrate the utility of computational fluid dynamics as a design tool in hypersonic inlet flow fields, to provide a detailed account of the nature and structure of the internal flow interactions, and to provide a comprehensive surface property and flow field database to determine the effects of contraction ratio, cowl position, and Reynolds number on the performance of a hypersonic scramjet inlet configuration. The work proceeded in several phases: the initial inviscid assessment of the internal shock structure, the preliminary computational parametric study, the coupling of the optimized configuration with the physical limitations of the facility, the wind tunnel blockage assessment, and the computational and experimental parametric study of the final configuration. Good agreement between computation and experimentation was observed in the magnitude and location of the interactions, particularly for weakly interacting flow fields. Large-scale forward separations resulted when the interaction strength was increased by increasing the contraction ratio or decreasing the Reynolds number.
-
BETA (Bitter Electromagnet Testing Apparatus) Design and Testing
NASA Astrophysics Data System (ADS)
Bates, Evan; Birmingham, William; Rivera, William; Romero-Talamas, Carlos
2016-10-01
BETA is a 1T water cooled Bitter-type magnetic system that has been designed and constructed at the Dusty Plasma Laboratory of the University of Maryland, Baltimore County to serve as a prototype of a scaled 10T version. Currently the system is undergoing magnetic, thermal and mechanical testing to ensure safe operating conditions and to prove analytical design optimizations. These magnets will function as experimental tools for future dusty plasma based and collaborative experiments. An overview of design methods used for building a custom made Bitter magnet with user defined experimental constraints is reviewed. The three main design methods consist of minimizing the following: ohmic power, peak conductor temperatures, and stresses induced by Lorentz forces. We will also discuss the design of BETA which includes: the magnet core, pressure vessel, cooling system, power storage bank, high powered switching system, diagnostics with safety cutoff feedback, and data acquisition (DAQ)/magnet control Matlab code. Furthermore, we present experimental data from diagnostics for validation of our analytical preliminary design methodologies and finite element analysis calculations. BETA will contribute to the knowledge necessary to finalize the 10 T magnet design.
-
NASA Technical Reports Server (NTRS)
French, Kenneth W., Jr.
1986-01-01
The salient aspects of the theoretical modeling of a conventional triaxial test (CTC) of a cohesionless granular medium with stress and strain rate loading are described. Included are a controllable gravitational body force and provision for low confining pressure and/or very low intergranular stress. The modeling includes rational, analytic, and numerical phases, all in various stages of development. The numerical evolutions of theoretical models will be used in final design stages and in the analysis of the experimental data. In this the experimental design stage, it is of special interest to include in the candidate considerations every anomaly found in preliminary terrestrial experimentation. Most of the anomalies will be eliminated by design or enhanced for measurement as the project progresses. The main aspect of design being not the physical apparatus but the type and trajectories of loading elected. The major considerations that have been treated are: appearance and growth of local surface aberrations, stress-power coefficients, strain types, optical strain, radial bead migration, and measures of rotation for the proper stress flux.
-
The development and preliminary effectiveness of a nursing case management e-learning program.
Liu, Wen-I; Chu, Kuo-Chung; Chen, Shing-Chia
2014-07-01
The purpose of this article was to describe the development and preliminary effectiveness of a digital case management education program. The e-learning program was built through the collaboration of a nurse educator and an informatics professor. The program was then developed according to the following steps: (1) building a visual interface, (2) scripting each unit, (3) preparing the course material and assessment tests, (4) using teaching software to record audio and video courses, (5) editing the audio recordings, (6) using instructional media or hyperlinks to finalize the interactions, (7) creating the assessment and obtaining feedback, and (8) testing the overall operation. The digital program consisted of five learning modules, self-assessment questions, learning cases, sharing experiences, and learning resources. Forty nurses participated in this study and fully completed the questionnaires both before and after the program. The knowledge and confidence levels in the experimental group were significantly higher over time than those of the comparison group. The results supported the use of educational technology to provide a more flexible and effective presentation method for continuing education programs.
-
Schneider, O; Troccaz, J
2001-01-01
The purpose of Computer-Assisted Surgery (CAS) is to help physicians and surgeons plan and execute optimal strategies from multimodal image data. The execution of such planned strategies may be assisted by guidance systems. Some of these systems, called synergistic systems, are based on the cooperation of a robotic device with a human operator. We have developed such a synergistic device: PADyC (Passive Arm with Dynamic Constraints). The basic principle of PADyC is to have a manually actuated arm that dynamically constrains the authorized motions of the surgical tool held by the human operator during a planned task. Dynamic constraints are computed from the task definition, and are implemented by a patented mechanical system. In this paper, we first introduce synergistic systems and then focus on modeling and algorithmic issues related to the dynamic constraints. Finally, we describe a 6-degree-of-freedom prototype robot designed for a clinical application (cardiac surgery) and report on preliminary experiments to date. The experimental results are then discussed, and future work is proposed. Copyright 2002 Wiley-Liss, Inc.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-25
...Pursuant to the Council on Environmental Quality Regulations (40 CFR part 1500-08) implementing procedural provisions of the National Environmental Policy Act (NEPA), the Department of Labor, Office of the Secretary (OSEC), in accordance with 29 CFR 11.11(d), gives final notice of the proposed construction of a small wind turbine at the Pine Ridge Job Corps Center, and that this project will not have a significant adverse impact on the environment. In accordance with 29 CFR 11.11(d) and 40 CFR 1501.4(e)(2), a preliminary FONSI for the project was published in the April 5, 2010 Federal Register (75 FR 17161). No comments were received regarding the preliminary FONSI. OSEC has reviewed the conclusion of the environmental assessment (EA), and agrees with the finding of no significant impact. This notice serves as the Final Finding of No Significant Impact (FONSI) for Small Wind Turbine Installation at the Pine Ridge Job Corps Center located at 15710 Highway 385, Chadron, NE 69337. The preliminary FONSI and the EA are adopted in final with no change.
-
Saltus, R.W.; Milicevic, B.
2004-01-01
A preliminary data grid and maps are presented for an aeromagnetic survey of the Taylor Mountains and a portion of the Bethel quadrangles, Alaska. The aeromagnetic survey was flown by McPhar Geosurveys Ltd. for the U.S. Geological Survey (USGS). A flight-line spacing of 1,600 meters (1 mile) and nominal flight height of 305 meters (1,000 feet) above topography (draped) was used for the survey. The preliminary data grid has a grid cell size of 350 meters (1150 feet). Final data processing and quality control have not been applied to these data. The purpose of this preliminary data release is to allow prompt public access to these data, which are of interest for active mineral exploration in the region. A more complete data release and description will be published later once the final data processing is complete.
-
An experimental system for flood risk forecasting and monitoring at global scale
NASA Astrophysics Data System (ADS)
Dottori, Francesco; Alfieri, Lorenzo; Kalas, Milan; Lorini, Valerio; Salamon, Peter
2017-04-01
Global flood forecasting and monitoring systems are nowadays a reality and are being applied by a wide range of users and practitioners in disaster risk management. Furthermore, there is an increasing demand from users to integrate flood early warning systems with risk based forecasting, combining streamflow estimations with expected inundated areas and flood impacts. Finally, emerging technologies such as crowdsourcing and social media monitoring can play a crucial role in flood disaster management and preparedness. Here, we present some recent advances of an experimental procedure for near-real time flood mapping and impact assessment. The procedure translates in near real-time the daily streamflow forecasts issued by the Global Flood Awareness System (GloFAS) into event-based flood hazard maps, which are then combined with exposure and vulnerability information at global scale to derive risk forecast. Impacts of the forecasted flood events are evaluated in terms of flood prone areas, potential economic damage, and affected population, infrastructures and cities. To increase the reliability of our forecasts we propose the integration of model-based estimations with an innovative methodology for social media monitoring, which allows for real-time verification and correction of impact forecasts. Finally, we present the results of preliminary tests which show the potential of the proposed procedure in supporting emergency response and management.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-03
.... Background Since the initiation of this investigation on January 19, 2012, the following events have occurred... than 135 days after the date of the publication of the preliminary determination if, in the event of an... significant proportion of exports of the subject merchandise, or in the event of a negative preliminary...
-
NASA Technical Reports Server (NTRS)
Schoenberg, Kurt; Gerwin, Richard; Henins, Ivars; Mayo, Robert; Scheuer, Jay; Nurden, Glen
1993-01-01
This paper summarizes preliminary experimental and theoretical research that was directed towards the study of quasisteady-state power flow in a large, un-optimized, multi-megawatt coaxial plasma thruster. The report addresses large coaxial thruster operation and includes evaluation and interpretation of the experimental results with a view to the development of efficient, steady-state megawatt-class magnetoplasmadynamic (MPD) thrusters.
-
Experimental study of flow due to an isolated suction hole and a partially plugged suction slot
NASA Technical Reports Server (NTRS)
Goglia, G. L.; Wilkinson, S. P.
1980-01-01
Details for construction of a model of a partially plugged, laminar flow control, suction slot and an isolated hole are presented. The experimental wind tunnel facility and instrumentation is described. Preliminary boundary layer velocity profiles (without suction model) are presented and shown to be in good agreement with the Blasius laminar profile. Recommendations for the completion of the study are made. An experimental program for study of transition on a rotating disk is described along with preliminary disturbance amplification rate data.
-
NASA Technical Reports Server (NTRS)
Rahman, Zia-ur; Jobson, Daniel J.; Woodell, Glenn A.
2010-01-01
New foundational ideas are used to define a novel approach to generic visual pattern recognition. These ideas proceed from the starting point of the intrinsic equivalence of noise reduction and pattern recognition when noise reduction is taken to its theoretical limit of explicit matched filtering. This led us to think of the logical extension of sparse coding using basis function transforms for both de-noising and pattern recognition to the full pattern specificity of a lexicon of matched filter pattern templates. A key hypothesis is that such a lexicon can be constructed and is, in fact, a generic visual alphabet of spatial vision. Hence it provides a tractable solution for the design of a generic pattern recognition engine. Here we present the key scientific ideas, the basic design principles which emerge from these ideas, and a preliminary design of the Spatial Vision Tree (SVT). The latter is based upon a cryptographic approach whereby we measure a large aggregate estimate of the frequency of occurrence (FOO) for each pattern. These distributions are employed together with Hamming distance criteria to design a two-tier tree. Then using information theory, these same FOO distributions are used to define a precise method for pattern representation. Finally the experimental performance of the preliminary SVT on computer generated test images and complex natural images is assessed.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-12
... final results do not differ from the Preliminary Results. We find that Reztec Industries Sdn Bhd... Reztec. We additionally find that Goodnite Sdn Bhd (``Goodnite'') failed to cooperate to the best of its...
-
2008-03-01
in all parts of the program except the predicates. B. PRELIMINARY EXPERIMENTATION Working with the hand written program initially to get a feel...PROBLEM STATEMENT AND MOTIVATION .......................................2 II. RELATED WORK ...ISOLATION.........................................7 III. PRELIMINARY WORK
-
Preliminary disposal limits, plume interaction factors, and final disposal limits
DOE Office of Scientific and Technical Information (OSTI.GOV)
Flach, G.
In the 2008 E-Area Performance Assessment (PA), each final disposal limit was constructed as the product of a preliminary disposal limit and a plume interaction factor. The following mathematical development demonstrates that performance objectives are generally expected to be satisfied with high confidence under practical PA scenarios using this method. However, radionuclides that experience significant decay between a disposal unit and the 100-meter boundary, such as H-3 and Sr-90, can challenge performance objectives, depending on the disposed-of waste composition, facility geometry, and the significance of the plume interaction factor. Pros and cons of analyzing single disposal units or multiple disposalmore » units as a group in the preliminary disposal limits analysis are also identified.« less
-
Induced environment contamination monitor: Preliminary results from the Spacelab 1 flight
NASA Technical Reports Server (NTRS)
Miller, E. R. (Editor)
1984-01-01
The STS-9/Induced Environment Contamination Monitor (IECM) mission is briefly described. Preliminary results and analyses are given for each of the 10 instruments comprising the IECM. The final section presents a summary of the major results.
-
Dynamic research of masonry vault in a technical scale
NASA Astrophysics Data System (ADS)
Golebiewski, Michal; Lubowiecka, Izabela; Kujawa, Marcin
2017-03-01
The paper presents preliminary results of dynamic tests of the masonry barrel vault in a technical scale. Experimental studies are intended to identify material properties of homogenized masonry vaults under dynamic loads. The aim of the work is to create numerical models to analyse vault's dynamic response to dynamic loads in a simplest and accurate way. The process of building the vault in a technical scale is presented in the paper. Furthermore a excitation of vibrations with an electrodynamic modal exciter placed on the vault, controlled by an arbitrary waveform function generator, is discussed. Finally paper presents trends in the research for homogenization algorithm enabling dynamic analysis of masonry vaults. Experimental results were compared with outcomes of so-called macromodels (macromodel of a brick masonry is a model in which masonry, i.e. a medium consisting of two different fractions - bricks and mortar, is represented by a homogenized, uniformed, material). Homogenization entail significant simplifications, nevertheless according to the authors, can be a useful approach in a static and dynamic analysis of masonry structures.
-
Preliminary Tritium Management Design Activities at ORNL
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harrison, Thomas J.; Felde, David K.; Logsdon, Randall J.
2016-09-01
Interest in salt-cooled and salt-fueled reactors has increased over the last decade (Forsberg et al. 2016). Several private companies and universities in the United States, as well as governments in other countries, are developing salt reactor designs and/or technology. Two primary issues for the development and deployment of many salt reactor concepts are (1) the prevention of tritium generation and (2) the management of tritium to prevent release to the environment. In 2016, the US Department of Energy (DOE) initiated a research project under the Advanced Reactor Technology Program to (1) experimentally assess the feasibility of proposed methods for tritiummore » mitigation and (2) to perform an engineering demonstration of the most promising methods. This document describes results from the first year’s efforts to define, design, and build an experimental apparatus to test potential methods for tritium management. These efforts are focused on producing a final design document as the basis for the apparatus and its scheduled completion consistent with available budget and approvals for facility use.« less
-
National Transonic Facility Wall Pressure Calibration Using Modern Design of Experiments (Invited)
NASA Technical Reports Server (NTRS)
Underwood, Pamela J.; Everhart, Joel L.; DeLoach, Richard
2001-01-01
The Modern Design of Experiments (MDOE) has been applied to wind tunnel testing at NASA Langley Research Center for several years. At Langley, MDOE has proven to be a useful and robust approach to aerodynamic testing that yields significant reductions in the cost and duration of experiments while still providing for the highest quality research results. This paper extends its application to include empty tunnel wall pressure calibrations. These calibrations are performed in support of wall interference corrections. This paper will present the experimental objectives, and the theoretical design process. To validate the tunnel-empty-calibration experiment design, preliminary response surface models calculated from previously acquired data are also presented. Finally, lessons learned and future wall interference applications of MDOE are discussed.
-
Does G6PD deficiency protect against cancer? A critical review.
Cocco, P
1987-01-01
Previous observations on the lower mortality for cancer experienced in populations with a higher frequency of G6PD deficiency support biochemical studies on the role of G6PD during cell proliferation. The general agreement among experimental studies prevented a deeper analysis of the sources of what has been called "epidemiological evidence of the protective role of G6PD deficiency against cancer". This review analyses the methods and findings in those papers, stressing their limitations and emphasising that no final conclusions can be drawn from them. Preliminary results of ongoing epidemiological studies of G6PD deficiency and cancer are presented, although they do not prove or disprove the hypothesis that G6PD deficiency protects against cancer. PMID:3309118
-
Validating a Monotonically-Integrated Large Eddy Simulation Code for Subsonic Jet Acoustics
NASA Technical Reports Server (NTRS)
Ingraham, Daniel; Bridges, James
2017-01-01
The results of subsonic jet validation cases for the Naval Research Lab's Jet Engine Noise REduction (JENRE) code are reported. Two set points from the Tanna matrix, set point 3 (Ma = 0.5, unheated) and set point 7 (Ma = 0.9, unheated) are attempted on three different meshes. After a brief discussion of the JENRE code and the meshes constructed for this work, the turbulent statistics for the axial velocity are presented and compared to experimental data, with favorable results. Preliminary simulations for set point 23 (Ma = 0.5, Tj=T1 = 1.764) on one of the meshes are also described. Finally, the proposed configuration for the farfield noise prediction with JENRE's Ffowcs-Williams Hawking solver are detailed.
-
NASA Astrophysics Data System (ADS)
Du, Qiang; Li, Yanjun
2015-06-01
In this paper, a multi-scale as-cast grain size prediction model is proposed to predict as-cast grain size of inoculated aluminum alloys melt solidified under non-isothermal condition, i.e., the existence of temperature gradient. Given melt composition, inoculation and heat extraction boundary conditions, the model is able to predict maximum nucleation undercooling, cooling curve, primary phase solidification path and final as-cast grain size of binary alloys. The proposed model has been applied to two Al-Mg alloys, and comparison with laboratory and industrial solidification experimental results have been carried out. The preliminary conclusion is that the proposed model is a promising suitable microscopic model used within the multi-scale casting simulation modelling framework.
-
Miniature infrared data acquisition and telemetry system
NASA Technical Reports Server (NTRS)
Stokes, J. H.; Ward, S. M.
1985-01-01
The Miniature Infrared Data Acquisition and Telemetry (MIRDAT) Phase 1 study was performed to determine the technical and commercial feasibility of producing a miniaturized electro-optical telemetry system. This system acquires and transmits experimental data from aircraft scale models for realtime monitoring in wind tunnels. During the Phase 1 study, miniature prototype MIRDAT telemetry devices were constructed, successfully tested in the laboratory and delivered to the user for wind tunnel testing. A search was conducted for commercially available components and advanced hybrid techniques to further miniaturize the system during Phase 2 development. A design specification was generated from laboratory testing, user requirements and discussions with component manufacturers. Finally, a preliminary design of the proposed MIRDAT system was documented for Phase 2 development.
-
Evolution and the psychology of intergroup conflict: the male warrior hypothesis.
McDonald, Melissa M; Navarrete, Carlos David; Van Vugt, Mark
2012-03-05
The social science literature contains numerous examples of human tribalism and parochialism-the tendency to categorize individuals on the basis of their group membership, and treat ingroup members benevolently and outgroup members malevolently. We hypothesize that this tribal inclination is an adaptive response to the threat of coalitional aggression and intergroup conflict perpetrated by 'warrior males' in both ancestral and modern human environments. Here, we describe how male coalitional aggression could have affected the social psychologies of men and women differently and present preliminary evidence from experimental social psychological studies testing various predictions from the 'male warrior' hypothesis. Finally, we discuss the theoretical implications of our research for studying intergroup relations both in humans and non-humans and discuss some practical implications.
-
Design and Experimental Verification of Chang'E-3 Moon-night Survival Device for APXS
NASA Astrophysics Data System (ADS)
Deng-yi, Chen; Jian, Wu; Yi-ming, Hu; Jin, Chang; Yi-zhong, Gong; Ming-sheng, Cai; Huan-yu, Wang; Jia-yu, Zhang; Xing-zhu, Cui; Jin-zhou, Wang
2016-07-01
The Active Particle X-ray Spectrometer (APXS) is one of the 4 scientific payloads of Chang'E-3 (CE-3) Lunar Rover, of which the scientific object is to identify the elements of lunar soil and rock samples by a carried radioactive source to trigger and detect the characteristic X-ray from them. According to the extreme temperature environment of the APXS and under the restriction of limited resources, this paper presents the design and analysis of the moon-night survival device RHU (radioisotope heating unit) for the APXS, and describes the corresponding environmental tests on its structure dynamics and moon-night survival. Finally, its reinstallation on the launch tower and the preliminary result of its on-orbit operation are introduced.
-
NASA Technical Reports Server (NTRS)
Bittker, D. A.
1980-01-01
The influence of ground-based gas turbine combustor operating conditions and fuel-bound nitrogen (FBN) found in coal-derived liquid fuels on the formation of nitrogen oxides and carbon monoxide is investigated. Analytical predictions of NOx and CO concentrations are obtained for a two-stage, adiabatic, perfectly-stirred reactor operating on a propane-air mixture, with primary equivalence ratios from 0.5 to 1.7, secondary equivalence ratios of 0.5 or 0.7, primary stage residence times from 12 to 20 msec, secondary stage residence times of 1, 2 and 3 msec and fuel nitrogen contents of 0.5, 1.0 and 2.0 wt %. Minimum nitrogen oxide but maximum carbon monoxide formation is obtained at primary zone equivalence ratios between 1.4 and 1.5, with percentage conversion of FBN to NOx decreasing with increased fuel nitrogen content. Additional secondary dilution is observed to reduce final pollutant concentrations, with NOx concentration independent of secondary residence time and CO decreasing with secondary residence time; primary zone residence time is not observed to affect final NOx and CO concentrations significantly. Finally, comparison of computed results with experimental values shows a good semiquantitative agreement.
-
Clinical and experimental study of TMJ distraction: preliminary results.
Festa, F; Galluccio, G
1998-01-01
A physiotherapeutic approach, with manual maneuvers and/or distraction appliances, is indicated in the treatment of temporomandibular joint disorders (TMDs) to prevent the progressive fibrosis of the muscle fibers. In this article, the authors report preliminary results of experimental and clinical studies conducted to assess the real effect of distraction in temporomandibular joint disorders. The experimental invivo studies confirmed the structural alteration due to compression and distraction on the capsular and condylar tissues. Clinical cases are reported to show the increase of the intraarticular vertical dimension, with a forward and downward movement of the condyles in a more physiologic condition.
-
76 FR 29192 - Honey From Argentina: Final Results of Antidumping Duty Administrative Review
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-20
... Results of Antidumping Duty Administrative Review AGENCY: Import Administration, International Trade...) published its preliminary results of the 2008-2009 administrative review of the antidumping duty order on honey from Argentina. See Honey From Argentina: Preliminary Results of Antidumping Duty Administrative...
-
NASA Astrophysics Data System (ADS)
Divay, C.; Colin, J.; Cussol, D.; Finck, Ch.; Karakaya, Y.; Labalme, M.; Rousseau, M.; Salvador, S.; Vanstalle, M.
2017-09-01
In order to keep the benefits of a carbon treatment, the dose and biological effects induced by secondary fragments must be taken into account when simulating the treatment plan. These Monte-Carlo simulations codes are done using nuclear models that are constrained by experimental data. It is hence necessary to have precise measurements of the production rates of these fragments all along the beam path and for its whole energy range. In this context, a series of experiments aiming to measure the double differential fragmentation cross-sections of carbon on thin targets of medical interest has been started by our collaboration. In March 2015, an experiment was performed with a 50 MeV/nucleon 12C beam at GANIL. During this experiment, energy and angular differential cross-section distributions on H, C, O, Al and natTi have been measured. In the following, the experimental set-up and analysis process are briefly described and some experimental results are presented. Comparisons between several exit channel models from Phits and Geant4 show great discrepancies with the experimental data. Finally, the homemade Sliipie model is briefly presented and preliminary results are compared to the data with a promising outcome.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Corbett, J.E.
1996-02-01
This report documents the completion of a preliminary design review for the Rotary Mode Core Sample Truck (RMCST) modifications for flammable gas tanks. The RMCST modifications are intended to support core sampling operations in waste tanks requiring flammable gas controls. The objective of this review was to validate basic design assumptions and concepts to support a path forward leading to a final design. The conclusion reached by the review committee was that the design was acceptable and efforts should continue toward a final design review.
-
Identification of elastic, dielectric, and piezoelectric constants in piezoceramic disks.
Perez, Nicolas; Andrade, Marco A B; Buiochi, Flavio; Adamowski, Julio C
2010-12-01
Three-dimensional modeling of piezoelectric devices requires a precise knowledge of piezoelectric material parameters. The commonly used piezoelectric materials belong to the 6mm symmetry class, which have ten independent constants. In this work, a methodology to obtain precise material constants over a wide frequency band through finite element analysis of a piezoceramic disk is presented. Given an experimental electrical impedance curve and a first estimate for the piezoelectric material properties, the objective is to find the material properties that minimize the difference between the electrical impedance calculated by the finite element method and that obtained experimentally by an electrical impedance analyzer. The methodology consists of four basic steps: experimental measurement, identification of vibration modes and their sensitivity to material constants, a preliminary identification algorithm, and final refinement of the material constants using an optimization algorithm. The application of the methodology is exemplified using a hard lead zirconate titanate piezoceramic. The same methodology is applied to a soft piezoceramic. The errors in the identification of each parameter are statistically estimated in both cases, and are less than 0.6% for elastic constants, and less than 6.3% for dielectric and piezoelectric constants.
-
Assessment of MARMOT Grain Growth Model
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fromm, B.; Zhang, Y.; Schwen, D.
2015-12-01
This report assesses the MARMOT grain growth model by comparing modeling predictions with experimental results from thermal annealing. The purpose here is threefold: (1) to demonstrate the validation approach of using thermal annealing experiments with non-destructive characterization, (2) to test the reconstruction capability and computation efficiency in MOOSE, and (3) to validate the grain growth model and the associated parameters that are implemented in MARMOT for UO 2. To assure a rigorous comparison, the 2D and 3D initial experimental microstructures of UO 2 samples were characterized using non-destructive Synchrotron x-ray. The same samples were then annealed at 2273K for grainmore » growth, and their initial microstructures were used as initial conditions for simulated annealing at the same temperature using MARMOT. After annealing, the final experimental microstructures were characterized again to compare with the results from simulations. So far, comparison between modeling and experiments has been done for 2D microstructures, and 3D comparison is underway. The preliminary results demonstrated the usefulness of the non-destructive characterization method for MARMOT grain growth model validation. A detailed analysis of the 3D microstructures is in progress to fully validate the current model in MARMOT.« less
-
Gyrotactic swimmer dispersion in pipe flow: testing the theory
NASA Astrophysics Data System (ADS)
Croze, Ottavio A.; Bearon, Rachel N.; Bees, Martin A.
2017-04-01
Suspensions of microswimmers are a rich source of fascinating new fluid mechanics. Recently we predicted the active pipe flow dispersion of gyrotactic microalgae, whose orientation is biased by gravity and flow shear. Analytical theory predicts that these active swimmers disperse in a markedly distinct manner from passive tracers (Taylor dispersion). Dispersing swimmers display nonzero drift and effective diffusivity that is non-monotonic with P$\\'e$clet number. Such predictions agree with numerical simulations, but hitherto have not been tested experimentally. Here, to facilitate comparison, we obtain new solutions of the axial dispersion theory accounting both for swimmer negative buoyancy and a local nonlinear response of swimmers to shear, provided by two alternative microscopic stochastic descriptions. We obtain new predictions for suspensions of the model swimming alga $\\it Dunaliella\\,salina$, whose motility and buoyant mass we parametrise using tracking video microscopy. We then present a new experimental method to measure gyrotactic dispersion using fluorescently stained $\\it D. salina$ and provide a preliminary comparison with predictions of a nonzero drift above the mean flow for each microscopic stochastic description. Finally, we propose further experiments for a full experimental characterisation of gyrotactic dispersion measures and discuss implications of our results for algal dispersion in industrial photobioreactors.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-10
...-Diphosphonic Acid from India: Final Results of Antidumping Duty Administrative Review AGENCY: Import... Department of Commerce (Department) published the preliminary results of the first administrative review of... weighted-average dumping margin for the manufacturer/exporter is listed below in the ``Final Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-13
... From India: Final Results of Antidumping Duty Changed-Circumstances Review AGENCY: Import...-in-interest to Alpanil Industries. See Carbazole Violet Pigment 23 From India: Preliminary Results of... Carbazole Violet Pigment 23 From India: Final Results of Antidumping Duty Administrative Review, 75 FR 38076...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-19
... Determination 3. Public Comments Regarding the Preliminary Determination II. Summary of the Comparative Analysis... the Department to finalize this determination. II. Summary of the Comparative Analysis DOE carried out...
-
Preliminary results for a higher-precision measurement of the helium n=2 triplet P fine structure
NASA Astrophysics Data System (ADS)
Kato, K.; Skinner, T. D. G.; George, M. C.; Fitzakerley, D. W.; Vutha, A. C.; Storry, C. H.; Bezginov, N.; Valdez, T.; Hessels, E. A.
2017-04-01
Preliminary results for a higher-precision measurement of the n=2 triplet P J=1 to J=2 fine-structure interval in atomic helium are presented. A beam of metastable helium atoms is created in a liquid-nitrogen-cooled dc-discharge source, and is intensified using a 2D-MOT. These atoms are excited to the 2 triplet P state, and undergo a frequency-offset separated-oscillatory-field (FOSOF) microwave experiment. Only atoms which undergo a microwave transition, in the time-separated microwave fields are laser-excited to a Rydberg state and then Stark ionized and counted. Our new experimental design has eliminated the major systematic effects of previous experiments, and has led to a substantial improvement in the signal-to-noise ratio of the collected data. Our final improved measurement (with an expected uncertainty of less than 100 Hz) will allow for a test of 2-electron QED-theory in the helium n=2 triplet P system, and will be an important step towards obtaining a precise determination of the fine-structure constant. This research is supported by NSERC, CRC, CFI and NIST.
-
Structural analysis of cylindrical thrust chambers, volume 1
NASA Technical Reports Server (NTRS)
Armstrong, W. H.
1979-01-01
Life predictions of regeneratively cooled rocket thrust chambers are normally derived from classical material fatigue principles. The failures observed in experimental thrust chambers do not appear to be due entirely to material fatigue. The chamber coolant walls in the failed areas exhibit progressive bulging and thinning during cyclic firings until the wall stress finally exceeds the material rupture stress and failure occurs. A preliminary analysis of an oxygen free high conductivity (OFHC) copper cylindrical thrust chamber demonstrated that the inclusion of cumulative cyclic plastic effects enables the observed coolant wall thinout to be predicted. The thinout curve constructed from the referent analysis of 10 firing cycles was extrapolated from the tenth cycle to the 200th cycle. The preliminary OFHC copper chamber 10-cycle analysis was extended so that the extrapolated thinout curve could be established by performing cyclic analysis of deformed configurations at 100 and 200 cycles. Thus the original range of extrapolation was reduced and the thinout curve was adjusted by using calculated thinout rates at 100 and 100 cycles. An analysis of the same underformed chamber model constructed of half-hard Amzirc to study the effect of material properties on the thinout curve is included.
-
NASA Astrophysics Data System (ADS)
Da Deppo, V.; Naletto, G.; Nicolosi, P.; Zambolin, P.; De Cecco, M.; Debei, S.; Parzianello, G.; Ramous, P.; Zaccariotto, M.; Fornasier, S.; Verani, S.; Thomas, N.; Barthol, P.; Hviid, S. F.; Sebastian, I.; Meller, R.; Sierks, H.; Keller, H. U.; Barbieri, C.; Angrilli, F.; Lamy, P.; Rodrigo, R.; Rickman, H.; Wenzel, K. P.
2017-11-01
Rosetta is one of the cornerstone missions of the European Space Agency for having a rendezvous with the comet 67P/Churyumov-Gerasimenko in 2014. The imaging instrument on board the satellite is OSIRIS (Optical, Spectroscopic and Infrared Remote Imaging System), a cooperation among several European institutes, which consists of two cameras: a Narrow (NAC) and a Wide Angle Camera (WAC). The WAC optical design is an innovative one: it adopts an all reflecting, unvignetted and unobstructed two mirror configuration which allows to cover a 12° × 12° field of view with an F/5.6 aperture and gives a nominal contrast ratio of about 10-4. The flight model of this camera has been successfully integrated and tested in our laboratories, and finally has been integrated on the satellite which is now waiting to be launched in February 2004. In this paper we are going to describe the optical characteristics of the camera, and to summarize the results so far obtained with the preliminary calibration data. The analysis of the optical performance of this model shows a good agreement between theoretical performance and experimental results.
-
U.S. freight on the move : highlights from the 2007 Commodity Flow Survey preliminary data
DOT National Transportation Integrated Search
2009-09-01
The 2007 CFS data and results presented in this report are preliminary. The 2007 CFS was conducted from a sample of 102,369 establishments. Previous surveys were conducted in 1993, 1997, and 2002. Final CFS data are scheduled for release in December ...
-
30 CFR 36.26 - Composition of exhaust gas.
Code of Federal Regulations, 2010 CFR
2010-07-01
... immediately at full load and speed. The preliminary liquid-fuel-injection rate shall be such that the exhaust... adverse conditions disclosed by preliminary tests. (b) Final engine adjustment. The liquid fuel supply to... percent, by volume, of carbon monoxide or 0.20 percent, by volume, of oxides of nitrogen (calculated as...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-27
... antidumping duty administrative review of purified carboxymethylcellulose (CMC) from the Netherlands, covering...) (Preliminary Results). The merchandise covered by the order is purified CMC, as described in the ``Scope of the... duty order on purified CMC from the Netherlands. See Preliminary Results. The respondent under review...
-
30 CFR 36.26 - Composition of exhaust gas.
Code of Federal Regulations, 2011 CFR
2011-07-01
... immediately at full load and speed. The preliminary liquid-fuel-injection rate shall be such that the exhaust will not contain black smoke and the applicant shall adjust the injection rate promptly to correct any adverse conditions disclosed by preliminary tests. (b) Final engine adjustment. The liquid fuel supply to...
-
30 CFR 36.26 - Composition of exhaust gas.
Code of Federal Regulations, 2013 CFR
2013-07-01
... immediately at full load and speed. The preliminary liquid-fuel-injection rate shall be such that the exhaust will not contain black smoke and the applicant shall adjust the injection rate promptly to correct any adverse conditions disclosed by preliminary tests. (b) Final engine adjustment. The liquid fuel supply to...
-
30 CFR 36.26 - Composition of exhaust gas.
Code of Federal Regulations, 2014 CFR
2014-07-01
... immediately at full load and speed. The preliminary liquid-fuel-injection rate shall be such that the exhaust will not contain black smoke and the applicant shall adjust the injection rate promptly to correct any adverse conditions disclosed by preliminary tests. (b) Final engine adjustment. The liquid fuel supply to...
-
30 CFR 36.26 - Composition of exhaust gas.
Code of Federal Regulations, 2012 CFR
2012-07-01
... immediately at full load and speed. The preliminary liquid-fuel-injection rate shall be such that the exhaust will not contain black smoke and the applicant shall adjust the injection rate promptly to correct any adverse conditions disclosed by preliminary tests. (b) Final engine adjustment. The liquid fuel supply to...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-20
... produced and exported by MCC EuroChem (EuroChem). The period of review (POR) is July 1, 2008, through June... for EuroChem. Therefore, the final results are different from the preliminary results. The final weighted-average dumping margin for EuroChem is listed below in the section entitled ``Final Results of the...
-
Preliminary design polymeric materials experiment. [for space shuttles and Spacelab missions
NASA Technical Reports Server (NTRS)
Mattingly, S. G.; Rude, E. T.; Marshner, R. L.
1975-01-01
A typical Advanced Technology Laboratory mission flight plan was developed and used as a guideline for the identification of a number of experiment considerations. The experiment logistics beginning with sample preparation and ending with sample analysis are then overlaid on the mission in order to have a complete picture of the design requirements. The results of this preliminary design study fall into two categories. First specific preliminary designs of experiment hardware which is adaptable to a variety of mission requirements. Second, identification of those mission considerations which affect hardware design and will require further definition prior to final design. Finally, a program plan is presented which will provide the necessary experiment hardware in a realistic time period to match the planned shuttle flights. A bibliography of all material reviewed and consulted but not specifically referenced is provided.
-
Effects of Active Listening, Reformulation, and Imitation on Mediator Success: Preliminary Results.
Fischer-Lokou, Jacques; Lamy, Lubomir; Guéguen, Nicolas; Dubarry, Alexandre
2016-06-01
An experiment with 212 students (100 men, 112 women; M age = 18.3 years, SD = 0.9) was carried out to compare the effect of four techniques used by mediators on the number of agreements contracted by negotiators. Under experimental conditions, mediators were asked either to rephrase (reformulate) negotiators' words or to imitate them or to show active listening behavior, or finally, to use a free technique. More agreements were reached in the active listening condition than in both free and rephrase conditions. Furthermore, mediators in the active listening condition were perceived, by the negotiators, as more efficient than mediators using other techniques, although there was no significant difference observed between the active listening and imitation conditions. © The Author(s) 2016.
-
Instrumented toys for assessing spatial cognition in infants
NASA Astrophysics Data System (ADS)
Campolo, Domenico; Taffoni, Fabrizio; Formica, Domenico; Keller, Flavio; Guglielmelli, Eugenio
2011-03-01
This paper describes an interdisciplinary approach to the assessment on infants' behavior, with a focus on the technology. The goal is an objective, quantitative analysis of concurrent maturation of sensory, motor and cognitive abilities in young children, in relation to the achievement of developmental milestones. An instrumented block-box toy specifically developed to assess the ability to insert objects into holes is presented. The functional specifications are derived from experimental protocols devised by neuroscientists to assess spatial cognition skills. Technological choices are emphasized with respect to ecological requirements. An ad hoc calibration procedure is also presented which is suitable to unstructured environments. Finally, preliminary tests carried out at a local day-care with 12-24 months old infants are presented which prove the in-field usability of the proposed technology.
-
Gate Set Tomography on two qubits
NASA Astrophysics Data System (ADS)
Nielsen, Erik; Blume-Kohout, Robin; Gamble, John; Rudinger, Kenneth
Gate set tomography (GST) is a method for characterizing quantum gates that does not require pre-calibrated operations, and has been used to both certify and improve the operation of single qubits. We analyze the performance of GST applied to a simulated two-qubit system, and show that Heisenberg scaling is achieved in this case. We present a GST analysis of preliminary two-qubit experimental data, and draw comparisons with the simulated data case. Finally, we will discuss recent theoretical developments that have improved the efficiency of GST estimation procedures, and which are particularly beneficial when characterizing two qubit systems. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000.
-
NASA Technical Reports Server (NTRS)
Scott, Elaine P.
1993-01-01
Thermal stress analyses are an important aspect in the development of aerospace vehicles such as the National Aero-Space Plane (NASP) and the High-Speed Civil Transport (HSCT) at NASA-LaRC. These analyses require knowledge of the temperature within the structures which consequently necessitates the need for thermal property data. The initial goal of this research effort was to develop a methodology for the estimation of thermal properties of aerospace structural materials at room temperature and to develop a procedure to optimize the estimation process. The estimation procedure was implemented utilizing a general purpose finite element code. In addition, an optimization procedure was developed and implemented to determine critical experimental parameters to optimize the estimation procedure. Finally, preliminary experiments were conducted at the Aircraft Structures Branch (ASB) laboratory.
-
Expert systems for automated maintenance of a Mars oxygen production system
NASA Technical Reports Server (NTRS)
Ash, Robert L.; Huang, Jen-Kuang; Ho, Ming-Tsang
1989-01-01
A prototype expert system was developed for maintaining autonomous operation of a Mars oxygen production system. Normal operation conditions and failure modes according to certain desired criteria are tested and identified. Several schemes for failure detection and isolation using forward chaining, backward chaining, knowledge-based and rule-based are devised to perform several housekeeping functions. These functions include self-health checkout, an emergency shut down program, fault detection and conventional control activities. An effort was made to derive the dynamic model of the system using Bond-Graph technique in order to develop the model-based failure detection and isolation scheme by estimation method. Finally, computer simulations and experimental results demonstrated the feasibility of the expert system and a preliminary reliability analysis for the oxygen production system is also provided.
-
Evolution and the psychology of intergroup conflict: the male warrior hypothesis
McDonald, Melissa M.; Navarrete, Carlos David; Van Vugt, Mark
2012-01-01
The social science literature contains numerous examples of human tribalism and parochialism—the tendency to categorize individuals on the basis of their group membership, and treat ingroup members benevolently and outgroup members malevolently. We hypothesize that this tribal inclination is an adaptive response to the threat of coalitional aggression and intergroup conflict perpetrated by ‘warrior males’ in both ancestral and modern human environments. Here, we describe how male coalitional aggression could have affected the social psychologies of men and women differently and present preliminary evidence from experimental social psychological studies testing various predictions from the ‘male warrior’ hypothesis. Finally, we discuss the theoretical implications of our research for studying intergroup relations both in humans and non-humans and discuss some practical implications. PMID:22271783
-
NASA Astrophysics Data System (ADS)
Scott, Elaine P.
1993-12-01
Thermal stress analyses are an important aspect in the development of aerospace vehicles such as the National Aero-Space Plane (NASP) and the High-Speed Civil Transport (HSCT) at NASA-LaRC. These analyses require knowledge of the temperature within the structures which consequently necessitates the need for thermal property data. The initial goal of this research effort was to develop a methodology for the estimation of thermal properties of aerospace structural materials at room temperature and to develop a procedure to optimize the estimation process. The estimation procedure was implemented utilizing a general purpose finite element code. In addition, an optimization procedure was developed and implemented to determine critical experimental parameters to optimize the estimation procedure. Finally, preliminary experiments were conducted at the Aircraft Structures Branch (ASB) laboratory.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-24
... Citrate Salts From Canada: Final Results of Antidumping Duty Administrative Review AGENCY: Import... Department of Commerce (the Department) published the preliminary results of the administrative review of the... results. We have made no changes to the margin calculation for the final results of this review. Therefore...
-
Method for exploratory cluster analysis and visualisation of single-trial ERP ensembles.
Williams, N J; Nasuto, S J; Saddy, J D
2015-07-30
The validity of ensemble averaging on event-related potential (ERP) data has been questioned, due to its assumption that the ERP is identical across trials. Thus, there is a need for preliminary testing for cluster structure in the data. We propose a complete pipeline for the cluster analysis of ERP data. To increase the signal-to-noise (SNR) ratio of the raw single-trials, we used a denoising method based on Empirical Mode Decomposition (EMD). Next, we used a bootstrap-based method to determine the number of clusters, through a measure called the Stability Index (SI). We then used a clustering algorithm based on a Genetic Algorithm (GA) to define initial cluster centroids for subsequent k-means clustering. Finally, we visualised the clustering results through a scheme based on Principal Component Analysis (PCA). After validating the pipeline on simulated data, we tested it on data from two experiments - a P300 speller paradigm on a single subject and a language processing study on 25 subjects. Results revealed evidence for the existence of 6 clusters in one experimental condition from the language processing study. Further, a two-way chi-square test revealed an influence of subject on cluster membership. Our analysis operates on denoised single-trials, the number of clusters are determined in a principled manner and the results are presented through an intuitive visualisation. Given the cluster structure in some experimental conditions, we suggest application of cluster analysis as a preliminary step before ensemble averaging. Copyright © 2015 Elsevier B.V. All rights reserved.
-
Reassessment of the OHZ process for the thermochemical decomposition of water. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Findl, E.; Kulesa, F.; Strickland, G.
1983-08-01
A two-step thermochemical process to sequentially produce hydrogen and oxygen from water by the use of a cation-exchanged zeolite, cycled over a temperature range of 25/sup 0/ to 600/sup 0/C, was reassessed at Brookhaven National Laboratory (BNL). Based on the work of Kasai and Bishop (Union Carbide Corp., 1976), C.C.S. Associates (CCSA) performed a preliminary plant-design study for the OHZ (oxygen-hydrogen-zeolite) process, and was responsible for a few laboratory tests of the zeolite. The results of the BNL's more detailed studies showed that although the thermochemical phenomenon is valid, it is neither practical nor a cost-effective method of producing hydrogenmore » from water. Experimental findings were based on tests of indium-exchanged mordenite zeolite (10 grams, as powder) without carrier gas. The cost reassessment, which was made without using any of BNL's experimental data, showed that the hydrogen costs projected by CCSA were low by a factor of about six (2-h cycle time). The corrected costs, $46 to 50/10/sup 6/ Btu H/sub 2/, are about twice those predicted for electrolytic hydrogen ($24/10/sup 6/ Btu). Corrected costs for a cycle time of 4 hours were $54 to 58/10/sup 6/ Btu. This reassessment, which is based on a realistic review of CCSA's preliminary process design, has shown that the corrected costs projected for OHZ hydrogen are so high that no further consideration should be given to development of the concept. 6 references, 14 figures, 6 tables.« less
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-23
... Federal share) IMD and other mental health facility DSH expenditures applicable to the State's FY 1995 DSH... State's total computable DSH expenditures attributable to the FY 1995 DSH allotment for mental health... DSH expenditures (mental health facility plus inpatient hospital) applicable to the FY 1995 DSH...
-
Code of Federal Regulations, 2010 CFR
2010-10-01
... under section 1115 of the Act. (b) National payment target. The national payment target for..., excluding administrative costs. A preliminary national expenditure target will be published by CMS prior to October 1 of each year. This preliminary national expenditure target will be superseded by a final...
-
Code of Federal Regulations, 2011 CFR
2011-10-01
... under section 1115 of the Act. (b) National payment target. The national payment target for..., excluding administrative costs. A preliminary national expenditure target will be published by CMS prior to October 1 of each year. This preliminary national expenditure target will be superseded by a final...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-29
... DEPARTMENT OF COMMERCE International Trade Administration [A-570-975] Galvanized Steel Wire From... galvanized steel wire from the People's Republic of China (``PRC'').\\1\\ We are amending our Preliminary... Fair Value and Postponement of Final Determination: Galvanized Steel Wire from the People's Republic of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-11
... DEPARTMENT OF COMMERCE International Trade Administration [A-489-805] Certain Pasta From Turkey...) is conducting an administrative review of the antidumping duty order on certain pasta (pasta) from...-preliminary decision memorandum. \\1\\ See Certain Pasta From Turkey: Notice of Preliminary Results of the 2010...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-10
... DEPARTMENT OF COMMERCE International Trade Administration [C-475-819] Certain Pasta From Italy... review of the countervailing duty order on certain pasta from Italy for the period January 1, 2009... preliminary results of this review. See Certain Pasta From Italy: Preliminary Results of the 14th (2009...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-06
... calls into question the reliability of this information. \\27\\ See Polyester Staple Fiber Final... Fiber From the People's Republic of China: Preliminary Results of the Antidumping Duty Administrative... duty order on certain polyester staple fiber from the People's Republic of China (``PRC'') for the...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-06
...: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On June 4..., Hubschercorp. On June 4, 2012, the Department published in the Federal Register the preliminary results of... FR 32938 (June 4, 2012) (Preliminary Results). In July 2012, we received a case brief from...
-
EPA is announcing the final (third) review draft report entitled Synthesis and Assessment Product 4.4: Preliminary Review of Adaptation Options for Climate Sensitive Ecosystems and Resources. This Synthesis and Assessment Product 4.4 (SAP 4.4) analyzes information on the ...
-
NASA Astrophysics Data System (ADS)
Tsanakas, John A.; Jaffre, Damien; Sicre, Mathieu; Elouamari, Rachid; Vossier, Alexis; de Salins, Jean-Edouard; Bechou, Laurent; Levrier, Bruno; Perona, Arnaud; Dollet, Alain
2014-09-01
This paper presents a preliminary study upon a novel approach proposed for highly accelerated ageing and reliability optimization of high concentrating photovoltaic (HCPV) cells and assemblies. The intended approach aims to overcome several limitations of some current accelerated ageing tests (AAT) adopted up today, proposing the use of an alternative experimental set-up for performing faster and more realistic thermal cycles, under real sun, without the involvement of environmental chamber. The study also includes specific characterization techniques, before and after each AAT sequence, which respectively provide the initial and final diagnosis on the condition of the tested sample. The acquired data from these diagnostic/characterization methods are then used as indices to determine both quantitatively and qualitatively the severity of degradation and, thus, the ageing level for each tested HCPV assembly or cell sample. Ultimate goal of such "initial diagnosis - AAT - final diagnosis" sequences is to provide the basis for a future work on the reliability analysis of the main degradation mechanisms and confident prediction of failure propagation in HCPV cells, by means of acceleration factor (AF) and mean-time-to-failure (MTTF) estimations.
-
Preliminary Analysis of the BASALA-H Experimental Programme
DOE Office of Scientific and Technical Information (OSTI.GOV)
Blaise, Patrick; Fougeras, Philippe; Philibert, Herve
2002-07-01
This paper is focused on the preliminary analysis of results obtained on the first cores of the first phase of the BASALA (Boiling water reactor Advanced core physics Study Aimed at mox fuel Lattice) programme, aimed at studying the neutronic parameters in ABWR core in hot conditions, currently under investigation in the French EOLE critical facility, within the framework of a cooperation between NUPEC, CEA and Cogema. The first 'on-line' analysis of the results has been made, using a new preliminary design and safety scheme based on the French APOLLO-2 code in its 2.4 qualified version and associated CEA-93 V4more » (JEF-2.2) Library, that will enable the Experimental Physics Division (SPEx) to perform future core designs. It describes the scheme adopted and the results obtained in various cases, going to the critical size determination to the reactivity worth of the perturbed configurations (voided, over-moderated, and poisoned with Gd{sub 2}O{sub 3}-UO{sub 2} pins). A preliminary study on the experimental results on the MISTRAL-4 is resumed, and the comparison of APOLLO-2 versus MCNP-4C calculations on these cores is made. The results obtained show very good agreements between the two codes, and versus the experiment. This work opens the way to the future full analysis of the experimental results of the qualifying teams with completely validated schemes, based on the new 2.5 version of the APOLLO-2 code. (authors)« less
-
NASA Technical Reports Server (NTRS)
Chwalowski, Pawel; Florance, Jennifer P.; Heeg, Jennifer; Wieseman, Carol D.; Perry, Boyd P.
2011-01-01
This paper presents preliminary computational aeroelastic analysis results generated in preparation for the first Aeroelastic Prediction Workshop (AePW). These results were produced using FUN3D software developed at NASA Langley and are compared against the experimental data generated during the HIgh REynolds Number Aero- Structural Dynamics (HIRENASD) Project. The HIRENASD wind-tunnel model was tested in the European Transonic Windtunnel in 2006 by Aachen University0s Department of Mechanics with funding from the German Research Foundation. The computational effort discussed here was performed (1) to obtain a preliminary assessment of the ability of the FUN3D code to accurately compute physical quantities experimentally measured on the HIRENASD model and (2) to translate the lessons learned from the FUN3D analysis of HIRENASD into a set of initial guidelines for the first AePW, which includes test cases for the HIRENASD model and its experimental data set. This paper compares the computational and experimental results obtained at Mach 0.8 for a Reynolds number of 7 million based on chord, corresponding to the HIRENASD test conditions No. 132 and No. 159. Aerodynamic loads and static aeroelastic displacements are compared at two levels of the grid resolution. Harmonic perturbation numerical results are compared with the experimental data using the magnitude and phase relationship between pressure coefficients and displacement. A dynamic aeroelastic numerical calculation is presented at one wind-tunnel condition in the form of the time history of the generalized displacements. Additional FUN3D validation results are also presented for the AGARD 445.6 wing data set. This wing was tested in the Transonic Dynamics Tunnel and is commonly used in the preliminary benchmarking of computational aeroelastic software.
-
Skucha-Nowak, Małgorzata; Machorowska-Pieniążek, Agnieszka; Tanasiewicz, Marta
2016-01-01
The aim of the infiltration technique is to penetrate demineralized enamel with a low viscosity resin. Icon® (DMG) is the first ever and so far the only dental infiltrant. Bacteriostaticity is one of the properties that should be inherent in dental infiltrants, but Icon lacks this feature. The aim of the preliminary study was to properly choose a dye which would allow us to assess the penetrating abilities of our own, experimental preparation with features of a dental infiltrant with bacteriostatic properties and to compare using an optical microscope the depth of infiltration of the designed experimental preparation with the infiltrant available on the market. The preparation is supposed to infiltrate decalcified human enamel and be assessed with an optical microscope. Eosin, neutral fuchsine and methylene blue were added to experimental preparation with dental infiltrant features and to Icon® (DMG) in order to assess the depth of penetration of the experimental solution into the decalcified layers of enamel. The experimental solution mixes well with eosin, neutral fuchsine, and methylene blue. During the preliminary study, the authors concluded that the experimental solution mixes well with methylene blue, neutral fuchsine, and eosin. An addition of eosin to a preparation which infiltrates inner, demineralized enamel layers, facilitates the assessment of such a preparation with an optical microscope. A designed experimental solution with the main ingredients, i.e., 2-hydroxyethyl methacrylate (HEMA) and tetraethylene glycol dimethacrylate (TEGDMA) with a ratio of 75% to 25% penetrates the demineralized (decalcified) inner parts of the enamel and polymerizes when exposed to light. In order to assess the infiltration of the experimental solution into the demineralized enamel layers, it is required to improve the measurement techniques that utilize optical microscopy.
-
Spring assisted cranioplasty: A patient specific computational model.
Borghi, Alessandro; Rodriguez-Florez, Naiara; Rodgers, Will; James, Gregory; Hayward, Richard; Dunaway, David; Jeelani, Owase; Schievano, Silvia
2018-03-01
Implantation of spring-like distractors in the treatment of sagittal craniosynostosis is a novel technique that has proven functionally and aesthetically effective in correcting skull deformities; however, final shape outcomes remain moderately unpredictable due to an incomplete understanding of the skull-distractor interaction. The aim of this study was to create a patient specific computational model of spring assisted cranioplasty (SAC) that can help predict the individual overall final head shape. Pre-operative computed tomography images of a SAC patient were processed to extract a 3D model of the infant skull anatomy and simulate spring implantation. The distractors were modeled based on mechanical experimental data. Viscoelastic bone properties from the literature were tuned using the specific patient procedural information recorded during surgery and from x-ray measurements at follow-up. The model accurately captured spring expansion on-table (within 9% of the measured values), as well as at first and second follow-ups (within 8% of the measured values). Comparison between immediate post-operative 3D head scanning and numerical results for this patient proved that the model could successfully predict the final overall head shape. This preliminary work showed the potential application of computational modeling to study SAC, to support pre-operative planning and guide novel distractor design. Copyright © 2018 IPEM. Published by Elsevier Ltd. All rights reserved.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-18
... Mantong Fine Chemistry Co. Ltd. (Baoding Mantong), for the final results. \\1\\ See Glycine From the People... and the Preliminary Margin-Calculation Program for Baoding Mantong Fine Chemistry Co., Ltd.'' (Revised...) Baoding Mantong Fine Chemistry Co., Ltd 453.79 Assessment Rates Consistent with these final results, and...
-
76 FR 5562 - Polyvinyl Alcohol From Taiwan: Final Determination of Sales at Less Than Fair Value
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-01
... Taiwan: Final Determination of Sales at Less Than Fair Value AGENCY: Import Administration, International... United States at less than fair value (LTFV), as provided in section 735 of the Tariff Act of 1930, as... Taiwan: Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final...
-
Manoharan, Prabu; Sridhar, J
2018-05-01
The organophosphorus hydrolase enzyme is involved in the catalyzing reaction that involve hydrolysis of organophosphate toxic compounds. An enzyme from Deinococcus radiodurans reported as homologous to phosphotriesterase and show activity against organophosphate. In the past activity of this enzyme is low and efforts made to improve the activity by experimental mutation study. However only very few organophosphates tested against very few catalytic site mutations. In order to improve the catalytic power of the organophosphorus hydrolase enzyme, we carried out systematic functional hotspot based protein engineering strategy. The mutants tested against 46 know organophosphate compounds using molecular docking study. Finally, we carried out an extensive molecular docking study to predict the binding of 46 organophosphate compounds to wild-type protein and mutant organophosphorus hydrolase enzyme. At the end we are able to improve the degrading potential of organophosphorus hydrolase enzyme against organophosphate toxic compounds. This preliminary study and the outcome would be useful guide for the experimental scientist involved in the bioremediation of toxic organophosphate compounds. Copyright © 2018 Elsevier Inc. All rights reserved.
-
Lee, Ping-Tzu; Dakin, Emily; McLure, Merinda
2016-05-01
Equine-assisted psychotherapy (EAP) is an innovative emerging approach to mental health treatment. This narrative synthesis explores the current state of knowledge and areas for future research in EAP. Specifically reviewed are qualitative and quantitative empirical studies, including both articles published in peer-reviewed journals and research presented in theses and dissertations. We selected 24 studies for final inclusion in this study, dating between 2005 and 2013, and including the first EAP empirical research completed in 2005. Four of these studies are peer-reviewed journal articles, while 20 are master's theses or doctoral dissertations. The reviewed qualitative research provides initial evidence for the value of EAP for enhancing adolescents' communication and relationship skills. The reviewed experimental and quasi-experimental research provides initial evidence for the value of EAP for enhancing children's and adolescents' emotional, social and behavioural functioning. Yet, conclusions about the effectiveness of EAP must still be considered preliminary due to various methodological limitations in the reviewed research. The narrative review describes these methodological limitations and concludes with recommendations for future research. © 2015 John Wiley & Sons Ltd.
-
Comparison of Spectral Characteristic between LAPAN-A3 and Sentinel-2A
NASA Astrophysics Data System (ADS)
Zylshal, Z.; Sari, N. M.; Nugroho, J. T.; Kushardono, D.
2017-12-01
Indonesian National Institute of Aeronautics and Space (LAPAN) started building its experimental microsatellite back in 2007 and finally able to launch its first microsatellite dubbed as LAPAN-A1/LAPAN-Tubsat. With the launch of LAPAN-A3/LAPAN-IPB, Indonesian experimental satellite programme hit its third generation. LAPAN-A3 is carrying multiple payloads including multispectral push-broom imager, digital matrix camera, as well as video camera. This paper aims to highlight the spectral differences between LAPAN-A3 and the well-established Sentinel-2A multispectral to investigate the potential of using LAPAN-A3 data to complement the other well-established medium resolution satellite data. Comparisons between corresponding bands and band transformations were performed over a dataset. Three areas of interest were chosen as the test sites. Linear regression and Pearson correlation coefficient were then calculated between the corresponding bands. The preliminary results showed a moderate correlation between the two sensors with Pearson correlation coefficient ranging from 0.39 to 0.65. Some issues were found regarding the radiometric quality over the whole scene of LAPAN-A3.
-
Mehra, Mamta; Vahidi, Farhad; Berg, Robert W
2014-06-01
The purpose of the study was to survey program directors of postdoctoral prosthodontic programs in the United States regarding their programs' complete denture impression techniques. The key objectives of the survey were to identify the current trends in complete denture impression making and to determine which techniques and materials are taught in US postdoctoral prosthodontic programs. An online survey was sent to all program directors of US postdoctoral prosthodontic programs. The survey comprised two sections: preliminary impressions and final impressions. The survey contained 22 questions that would take approximately 5 minutes to complete. All responses remained anonymous throughout the survey. The response rate for the survey was 87%. A majority of the programs did not separately border mold the tray prior to making the preliminary impressions (82%). The impression material of choice for the preliminary impression was irreversible hydrocolloid (88%). Selective pressure was the predominantly used impression philosophy (80%). All programs border molded the custom tray, and 95% recorded the borders in sections. The material of choice for border molding the custom tray was modeling plastic impression compound (71%). The most commonly used impression material for the final impressions was polyvinylsiloxane (PVS) (42%), and the second most commonly used impression material was polysulphide (32%). The most common technique for locating the posterior palatal seal was marking intraorally and transferring onto the final impression (65%). Most programs routinely advised their patients not to wear their existing dentures for at least 24 hours before the final impressions were made (83%). Based on the results of this study, the following conclusions can be drawn: (1) The most commonly used material for the preliminary impression was irreversible hydrocolloid and for the final impression was PVS. (2) Modeling plastic impression compound was used by most programs to border mold the custom trays. (3) Selective pressure was the predominantly used impression philosophy. (4) A majority of the programs made a special consideration for excessive movable (flabby) tissue. (5) Most programs routinely advised their patients to not wear their existing dentures for at least 24 hours before the final impressions were made. © 2013 by the American College of Prosthodontists.
-
NASA Technical Reports Server (NTRS)
Howard, D. F.
1976-01-01
The preliminary design and installation of high bypass, geared turbofan engine with a composite nacelle forming the propulsion system for a short haul passenger aircraft are described. The technology required for externally blown flap aircraft with under the wing (UTW) propulsion system installations for introduction into passenger service in the mid 1980's is included. The design, fabrication, and testing of this UTW experimental engine containing the required technology items for low noise, fuel economy, with composite structure for reduced weight and digital engine control are provided.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-11
... rates or rates based entirely on AFA. See, e.g., Certain Pasta From Italy: Preliminary Results of the... in Certain Pasta from Italy: Final Results of the 13th (2008) Countervailing Duty Administrative...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-17
... --Financial Ratios --Labor Costs --Oxygen --Steel Types --Truck Freight --The Philippine Data 7. U.S... country of origin designations. On March 19, 2013, we issued a post-preliminary analysis memorandum... Republic of China for the 2010-2011 Period: Post- Preliminary Analysis'' dated March 19, 2013. See also the...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-21
... ``TUNA's No-Shipment Claim'' section of this notice for further explanation). As a result of our analysis... Results Analysis Memorandum for Mueller Comercial, S. de R.L. de C.V.,'' dated February 10, 2011 (Post-Preliminary Results Analysis Memorandum). As part of that post-preliminary calculation, three memoranda from...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-06
... DEPARTMENT OF COMMERCE International Trade Administration [A-570-831] Fresh Garlic From the People... Department) issued the preliminary results of the new shipper review of fresh garlic from the People's... Fresh Garlic From the People's Republic of China: Preliminary Results of New Shipper Reviews and...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-04
... made below normal value (``NV''). If these preliminary results are adopted in our final results of... Sales at Less Than Fair Value and Antidumping Duty Order: Certain Frozen Warmwater Shrimp From the... Less Than Fair Value: Certain Hot-Rolled Carbon Steel Flat Products From the People's Republic of China...
-
75 FR 12175 - Certain Frozen Warmwater Shrimp from India: Preliminary Results of Antidumping Duty...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-15
... determine that sales made by Devi have not been made at below normal value (NV), while those made by Falcon.... In addition, based on the preliminary results for the respondents selected for individual examination... from India. See Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping...
-
49 CFR 611.7 - Relation to planning and project development processes.
Code of Federal Regulations, 2010 CFR
2010-10-01
...) Preliminary Engineering. Consistent with 49 USC 5309(e)(6) and 5328(a)(2), FTA will approve/disapprove entry... rating of “recommended” to be approved for entry into preliminary engineering. (4) This part does not in... 5328(a)(3), FTA will approve/disapprove entry of a proposed project into final design within 120 days...
-
ERIC Educational Resources Information Center
LEVINE, LOUIS S.
THIS REPORT DESCRIBES SEVERAL STEPS UNDERTAKEN BY A RESEARCH GROUP FROM SAN FRANCISCO STATE COLLEGE PRELIMINARY TO THE PROPOSED CREATION OF A RESEARCH CENTER FOR STUDIES OF DISADVANTAGED PRESCHOOL CHILDREN. THE PLANS ANTICIPATE FORMATION OF A COMPREHENSIVE SERVICE, RESEARCH, AND TRAINING CENTER FOR DISADVANTAGED CHILDREN AND THEIR FAMILIES. THE…
-
ERIC Educational Resources Information Center
SEIBERT, WARREN F.; AND OTHERS
PRELIMINARY ANALYSES WERE UNDERTAKEN TO DETERMINE THE POTENTIAL CONTRIBUTION OF MOTION PICTURE FILMS TO FACTOR ANALYTIC STUDIES OF HUMAN INTELLECT. OF PRIMARY CONCERN WERE THE OPERATIONS OF COGNITION AND MEMORY, FORMING TWO OF THE FIVE OPERATION COLUMNS OF GUILFORD'S "STRUCTURE OF INTELLECT." THE CORE REFERENCE FOR THE STUDY WAS DEFINED…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-29
... DEPARTMENT OF COMMERCE International Trade Administration [C-475-819] Certain Pasta from Italy... pasta from Italy for the period January 1, 2008, through December 31, 2008. On April 13, 2010, we published the Preliminary Results of this review. See Certain Pasta From Italy: Preliminary Results of the...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-09
... Certain Cut-to-Length Carbon Steel Plate From the Russian Federation; Final Results of Antidumping Duty...) published the preliminary results of an administrative review of the suspension agreement on certain cut-to...). See Certain Cut-to-Length Carbon Steel Plate From the Russian Federation; 2012; Preliminary Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-24
... DEPARTMENT OF COMMERCE International Trade Administration A-570-849 Certain Cut-to-Length Carbon... Certain Cut-to-Length Carbon Steel Plate From the People's Republic of China: Preliminary Results and... Preliminary Results in the antidumping duty administrative review of certain cut- to-length carbon steel plate...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-13
...-Quality Steel Plate Products From the Republic of Korea: Preliminary Results of Antidumping Duty... steel plate products (steel plate) from the Republic of Korea (Korea). This review covers one producer... Federal Register an antidumping duty order on steel plate from Korea. See Notice of Amendment of Final...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-12
... a post-preliminary analysis in which we altered the cost-of- production methodology from that which... scope of the order is dispositive. Alternative Cost Methodology In our Preliminary Results we relied on... Results, 75 FR at 12516), and we compared the home-market prices to POR costs for the cost-of-production...
-
Preliminary analysis of Dione Regio, Venus: The final Magellan regional imaging gap
NASA Technical Reports Server (NTRS)
Keddie, S. T.
1993-01-01
In Sep. 1992, the Magellan spacecraft filled the final large gap in its coverage of Venus when it imaged an area west of Alpha Regio. F-BIDR's and some test MIDR's of parts of this area were available as of late December. Dione Regio was imaged by the Arecibo observatory and a preliminary investigation of Magellan images supports the interpretations made based on these earlier images: Dione Regio is a regional highland on which is superposed three large, very distinct volcanic edifices. The superior resolution and different viewing geometry of the Magellan images also clarified some uncertainties and revealed fascinating details about this region.
-
NASA Astrophysics Data System (ADS)
Sciazko, Anna; Komatsu, Yosuke; Brus, Grzegorz; Kimijima, Shinji; Szmyd, Janusz S.
2014-09-01
For a mathematical model based on the result of physical measurements, it becomes possible to determine their influence on the final solution and its accuracy. However, in classical approaches, the influence of different model simplifications on the reliability of the obtained results are usually not comprehensively discussed. This paper presents a novel approach to the study of methane/steam reforming kinetics based on an advanced methodology called the Orthogonal Least Squares method. The kinetics of the reforming process published earlier are divergent among themselves. To obtain the most probable values of kinetic parameters and enable direct and objective model verification, an appropriate calculation procedure needs to be proposed. The applied Generalized Least Squares (GLS) method includes all the experimental results into the mathematical model which becomes internally contradicted, as the number of equations is greater than number of unknown variables. The GLS method is adopted to select the most probable values of results and simultaneously determine the uncertainty coupled with all the variables in the system. In this paper, the evaluation of the reaction rate after the pre-determination of the reaction rate, which was made by preliminary calculation based on the obtained experimental results over a Nickel/Yttria-stabilized Zirconia catalyst, was performed.
-
Development and fabrication of large vented nickel--zinc cells. Final report. [300 Ah
DOE Office of Scientific and Technical Information (OSTI.GOV)
Donnel, C.P.I.
1975-12-01
A preliminary cell design for a 300-Ah vented nickel--zinc cell was established based on volume requirements and cell component materials selected by NASA Lewis Research Center. A 100-Ah cell configuration was derived from the 300-Ah cell design utilizing the same size electrodes, separators, and cell terminal hardware. The first cells fabricated were four groups of three cells each in the 100-Ah size. These 100-Ah experimental nickel--zinc cells had as common components the nickel positive electrodes (GFM), flexible inorganic separator (GFM) bags on the negative electrodes, pressed powder zinc oxide electrodes, and cell containers with hardware. The variations introduced were fourmore » differing electrolyte absorber (interseparator) systems used to encase the nickel positive electrodes of each cell group. The four groups of 100-Ah experimental vented nickel--zinc cells were tested to determine, based on cell performance, the best two interseparator systems. Using the two interseparator systems, two groups of experimental 300-AH cells were fabricated. Each group of three cells differed only in the interseparator material used. The six cells were filled, formed and tested to evaluate the interseparator materials and investigate the performance characteristics of the 300-Ah cell configuration and its components. (auth)« less
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-10
... question, including when that rate is zero or de minimis.\\5\\ In this case, there is only one non-selected... calculations for one company. Therefore, the final results differ from the preliminary results. The final... not to calculate an all-others rate using any zero or de minimis margins or any margins based entirely...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-04
... People's Republic of China: Final Affirmative Countervailing Duty Determination AGENCY: Import... producers and exporters of aluminum extrusions from the People's Republic of China (the PRC). For... Aluminum Extrusions From the People's Republic of China: Preliminary Affirmative Countervailing Duty...
-
FY2017 Report on NISC Measurements and Detector Simulations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Andrews, Madison Theresa; Meierbachtol, Krista Cruse; Jordan, Tyler Alexander
FY17 work focused on automation, both of the measurement analysis and comparison of simulations. The experimental apparatus was relocated and weeks of continuous measurements of the spontaneous fission source 252Cf was performed. Programs were developed to automate the conversion of measurements into ROOT data framework files with a simple terminal input. The complete analysis of the measurement (which includes energy calibration and the identification of correlated counts) can now be completed with a documented process which involves one simple execution line as well. Finally, the hurdles of slow MCNP simulations resulting in low simulation statistics have been overcome with themore » generation of multi-run suites which make use of the highperformance computing resources at LANL. Preliminary comparisons of measurements and simulations have been performed and will be the focus of FY18 work.« less
-
NASA Technical Reports Server (NTRS)
Davidian, Kenneth J.; Dieck, Ronald H.; Chuang, Isaac
1987-01-01
A preliminary uncertainty analysis was performed for the High Area Ratio Rocket Nozzle test program which took place at the altitude test capsule of the Rocket Engine Test Facility at the NASA Lewis Research Center. Results from the study establish the uncertainty of measured and calculated parameters required for the calculation of rocket engine specific impulse. A generalized description of the uncertainty methodology used is provided. Specific equations and a detailed description of the analysis is presented. Verification of the uncertainty analysis model was performed by comparison with results from the experimental program's data reduction code. Final results include an uncertainty for specific impulse of 1.30 percent. The largest contributors to this uncertainty were calibration errors from the test capsule pressure and thrust measurement devices.
-
Development of superalloys by powder metallurgy for use at 1000 - 1400 F
NASA Technical Reports Server (NTRS)
Calhoun, C. D.
1971-01-01
Consolidated powders of four nickel-base superalloys were studied for potential application as compressor and turbine discs in jet engines. All of the alloys were based on the Rene' 95 chemistry. Three of these had variations in carbon and A12O3 contents, and the fourth alloy was chemically modified to a higher volume fraction. The A12O3 was added by preoxidation of the powders prior to extrusion. Various levels of four experimental factors (1) alloy composition, (2) grain size, (3) thermomechanical processing, and (4) room temperature deformation plus final age were evaluated by tensile and stress rupture testing at 1200 F. Various levels of the four factors were assumed in order to construct the statistically-designed experiment, but the actual levels investigated were established in preliminary studies that preceded the statistical process development study.
-
Neutron cross section measurements at n-TOF for ADS related studies
NASA Astrophysics Data System (ADS)
Mastinu, P. F.; Abbondanno, U.; Aerts, G.; Álvarez, H.; Alvarez-Velarde, F.; Andriamonje, S.; Andrzejewski, J.; Assimakopoulos, P.; Audouin, L.; Badurek, G.; Bustreo, N.; aumann, P.; vá, F. Be; Berthoumieux, E.; Calviño, F.; Cano-Ott, D.; Capote, R.; Carrillo de Albornoz, A.; Cennini, P.; Chepel, V.; Chiaveri, E.; Colonna, N.; Cortes, G.; Couture, A.; Cox, J.; Dahlfors, M.; David, S.; Dillmann, I.; Dolfini, R.; Domingo-Pardo, C.; Dridi, W.; Duran, I.; Eleftheriadis, C.; Embid-Segura, M.; Ferrant, L.; Ferrari, A.; Ferreira-Marques, R.; itzpatrick, L.; Frais-Kölbl, H.; Fujii, K.; Furman, W.; Guerrero, C.; Goncalves, I.; Gallino, R.; Gonzalez-Romero, E.; Goverdovski, A.; Gramegna, F.; Griesmayer, E.; Gunsing, F.; Haas, B.; Haight, R.; Heil, M.; Herrera-Martinez, A.; Igashira, M.; Isaev, S.; Jericha, E.; Kadi, Y.; Käppeler, F.; Karamanis, D.; Karadimos, D.; Kerveno, M.; Ketlerov, V.; Koehler, P.; Konovalov, V.; Kossionides, E.; Krti ka, M.; Lamboudis, C.; Leeb, H.; Lindote, A.; Lopes, I.; Lozano, M.; Lukic, S.; Marganiec, J.; Marques, L.; Marrone, S.; Massimi, C.; Mengoni, A.; Milazzo, P. M.; Moreau, C.; Mosconi, M.; Neves, F.; Oberhummer, H.; O'Brien, S.; Oshima, M.; Pancin, J.; Papachristodoulou, C.; Papadopoulos, C.; Paradela, C.; Patronis, N.; Pavlik, A.; Pavlopoulos, P.; Perrot, L.; Plag, R.; Plompen, A.; Plukis, A.; Poch, A.; Pretel, C.; Quesada, J.; Rauscher, T.; Reifarth, R.; Rosetti, M.; Rubbia, C.; Rudolf, G.; Rullhusen, P.; Salgado, J.; Sarchiapone, L.; Savvidis, I.; Stephan, C.; Tagliente, G.; Tain, J. L.; Tassan-Got, L.; Tavora, L.; Terlizzi, R.; Vannini, G.; Vaz, P.; Ventura, A.; Villamarin, D.; Vincente, M. C.; Vlachoudis, V.; Vlastou, R.; Voss, F.; Walter, S.; Wendler, H.; Wiescherand, M.; Wisshak, K.
2006-05-01
A neutron Time-of-Flight facility (n_TOF) is available at CERN since 2001. The innovative features of the neutron beam, in particular the high instantaneous flux, the wide energy range, the high resolution and the low background, make this facility unique for measurements of neutron induced reactions relevant to the field of Emerging Nuclear Technologies, as well as to Nuclear Astrophysics and Fundamental Nuclear Physics. The scientific motivations that have led to the construction of this new facility are here presented. The main characteristics of the n_TOF neutron beam are described, together with the features of the experimental apparata used for cross-section measurements. The main results of the first measurement campaigns are presented. Preliminary results of capture cross-section measurements of minor actinides, important to ADS project for nuclear waste transmutation, are finally discussed.
-
NASA Technical Reports Server (NTRS)
Davidian, Kenneth J.; Dieck, Ronald H.; Chuang, Isaac
1987-01-01
A preliminary uncertainty analysis has been performed for the High Area Ratio Rocket Nozzle test program which took place at the altitude test capsule of the Rocket Engine Test Facility at the NASA Lewis Research Center. Results from the study establish the uncertainty of measured and calculated parameters required for the calculation of rocket engine specific impulse. A generalized description of the uncertainty methodology used is provided. Specific equations and a detailed description of the analysis are presented. Verification of the uncertainty analysis model was performed by comparison with results from the experimental program's data reduction code. Final results include an uncertainty for specific impulse of 1.30 percent. The largest contributors to this uncertainty were calibration errors from the test capsule pressure and thrust measurement devices.
-
Object-Oriented MDAO Tool with Aeroservoelastic Model Tuning Capability
NASA Technical Reports Server (NTRS)
Pak, Chan-gi; Li, Wesley; Lung, Shun-fat
2008-01-01
An object-oriented multi-disciplinary analysis and optimization (MDAO) tool has been developed at the NASA Dryden Flight Research Center to automate the design and analysis process and leverage existing commercial as well as in-house codes to enable true multidisciplinary optimization in the preliminary design stage of subsonic, transonic, supersonic and hypersonic aircraft. Once the structural analysis discipline is finalized and integrated completely into the MDAO process, other disciplines such as aerodynamics and flight controls will be integrated as well. Simple and efficient model tuning capabilities based on optimization problem are successfully integrated with the MDAO tool. More synchronized all phases of experimental testing (ground and flight), analytical model updating, high-fidelity simulations for model validation, and integrated design may result in reduction of uncertainties in the aeroservoelastic model and increase the flight safety.
-
Application of Fiber Optic Instrumentation
NASA Technical Reports Server (NTRS)
Richards, William Lance; Parker, Allen R., Jr.; Ko, William L.; Piazza, Anthony; Chan, Patrick
2012-01-01
Fiber optic sensing technology has emerged in recent years offering tremendous advantages over conventional aircraft instrumentation systems. The advantages of fiber optic sensors over their conventional counterparts are well established; they are lighter, smaller, and can provide enormous numbers of measurements at a fraction of the total sensor weight. After a brief overview of conventional and fiber-optic sensing technology, this paper presents an overview of the research that has been conducted at NASA Dryden Flight Research Center in recent years to advance this promising new technology. Research and development areas include system and algorithm development, sensor characterization and attachment, and real-time experimentally-derived parameter monitoring for ground- and flight-based applications. The vision of fiber optic smart structure technology is presented and its potential benefits to aerospace vehicles throughout the lifecycle, from preliminary design to final retirement, are presented.
-
NASA Astrophysics Data System (ADS)
Buccolieri, Riccardo; Genga, Alessandra; De Donno, Antonella; Siciliano, Tiziana; Siciliano, Maria; Serio, Francesca; Grassi, Tiziana; Rispoli, Gennaro; Cavaiola, Mattia; Lionello, Piero
2017-04-01
The Jonico-Salentino project (PJS) is a multidisciplinary study funded by Apulia Region (Det. N. 188_RU - 10/11/2015) aiming to assess health risk of people living in the cities of Lecce, Brindisi and Taranto. Citizens are exposed to emissions from industrial sources, biomass burning, vehicular, naval and air traffic, as well as from natural radioactive sources (radon). In this context, this work presents some preliminary results obtained by the Unit of University of Salento (Lecce) during an experimental campaign carried out in the study areas. The campaign is devoted to (i) sample particulate matter (PM), (ii) measure micro-meteorological variables and (iii) evaluate exposure levels of residents to main pollutants. Specifically, PM is sampled using a low volume sampler, while meteorological variables (wind speed components and direction temperature, relative humidity, precipitation and global solar radiation) are measured by advanced instrumentation such as ultrasonic anemometers which allows for the estimation of turbulence fluxes. The early effects of exposure to air pollutants is evaluated by the frequency of micronucleus (a biomarker of DNA damage) in exfoliated buccal cells collected using a soft-bristled toothbrush from oral mucosa of primary school children enrolled in the study. PM concentration data collected during the campaign are characterised from a chemical and morphological point of view; the analysis of different groups of particles allows identifying different natural and anthropogenic emission sources. This is done in conjunction to the investigation of the influence of local meteorology to elucidate the contribution of specific types of sources on final concentration levels. Finally, all data are used to assess the health risk of people living in the study areas as consequence of exposure to airborne pollutants.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dang, Fangchao, E-mail: dangfangchao@sina.com; Zhang, Xiaoping; Zhong, Huihuang
2015-09-15
A Ku-band radial line oscillator (RLO) with low guiding magnetic field was proposed in our previous work. In order to weaken the impedance mismatch between the oscillator and an intense electron accelerator with higher impedance, a transverse electromagnetic reflector is added to improve the RLO, which is favorable to increase the Q-factor and accelerate the device saturation. A preliminary experiment is carried out to investigate the performance of the improved RLO. The radial-radiated electron beam is restrained well under the designed guiding magnetic field of 0.52 T. The preliminary experimental results indicates that high power microwaves with a power of 120 MWmore » and a frequency of 14.12 GHz are generated when the diode voltage is 420 kV and the beam current 14.2 kA. The experimental results suggest the feasibility of the presented RLO generating high power microwaves at a high frequency band. Additionally, more work is needed regarding promotion of the electron beam quality and the impedance match between the electron beam accelerator and the oscillator.« less
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-22
... preliminary results are adopted in our final results of this review, we will instruct U.S. Customs and Border... (CAS Registry 81-07-07); and (4) research grade saccharin. Most of the U.S.-produced and imported... U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230. See 19...
-
Preliminary design report: Babcock and Wilcox BR-100 100-ton rail/barge spent fuel shipping cask
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1990-02-01
The purpose of this document is to provide information on burnup credit as applied to the preliminary design of the BR-100 shipping cask. There is a brief description of the preliminary basket design and the features used to maintain a critically safe system. Following the basket description is a discussion of various criticality analyses used to evaluate burnup credit. The results from these analyses are then reviewed in the perspective of fuel burnups expected to be shipped to either the final repository or a Monitored Retrievable Storage (MRS) facility. The hurdles to employing burnup credit in the certification of anymore » cask are then outlines and reviewed. the last section gives conclusions reached as to burnup credit for the BR-100 cask, based on our analyses and experience. All information in this study refers to the cask configured to transport PWR fuel. Boiling Water Reactor (BWR) fuel satisfies the criticality requirements so that burnup credit is not needed. All calculations generated in the preparation of this report were based upon the preliminary design which will be optimized during the final design. 8 refs., 19 figs., 16 tabs.« less
-
Airport Surface Delays and Causes: A Preliminary Analysis
NASA Technical Reports Server (NTRS)
Chin, David K.; Goldberg, Jay; Tang, Tammy
1997-01-01
This report summarizes FAA Program Analysis and Operations Research Service (ASD-400)/Lockheed Martin activities and findings related to airport surface delays and causes, in support of NASA Langley Research Center's Terminal Area Productivity (TAP) Program. The activities described in this report were initiated in June 1995. A preliminary report was published on September 30, 1995. The final report incorporates data collection forms filled out by traffic managers, other FAA staff, and an airline for the New York City area, some updates, data previously requested from various sources to support this analysis, and further quantification and documentation than in the preliminary report. This final report is based on data available as of April 12, 1996. This report incorporates data obtained from review and analysis of data bases and literature, discussions/interviews with engineers, air-traffic staff, other FAA technical personnel, and airline staff, site visits, and a survey on surface delays and causes. It includes analysis of delay statistics; preliminary findings and conclusions on surface movement, surface delay sources and causes, runway occupancy time (ROT), and airport characteristics impacting surface operations and delays; and site-specific data on the New York City area airports, which are the focus airports for this report.
-
A robust automatic phase correction method for signal dense spectra
NASA Astrophysics Data System (ADS)
Bao, Qingjia; Feng, Jiwen; Chen, Li; Chen, Fang; Liu, Zao; Jiang, Bin; Liu, Chaoyang
2013-09-01
A robust automatic phase correction method for Nuclear Magnetic Resonance (NMR) spectra is presented. In this work, a new strategy combining ‘coarse tuning' with ‘fine tuning' is introduced to correct various spectra accurately. In the ‘coarse tuning' procedure, a new robust baseline recognition method is proposed for determining the positions of the tail ends of the peaks, and then the preliminary phased spectra are obtained by minimizing the objective function based on the height difference of these tail ends. After the ‘coarse tuning', the peaks in the preliminary corrected spectra can be categorized into three classes: positive, negative, and distorted. Based on the classification result, a new custom negative penalty function used in the step of ‘fine tuning' is constructed to avoid the negative peak points in the spectra excluded in the negative peaks and distorted peaks. Finally, the fine phased spectra can be obtained by minimizing the custom negative penalty function. This method is proven to be very robust for it is tolerant to low signal-to-noise ratio, large baseline distortion and independent of the starting search points of phasing parameters. The experimental results on both 1D metabonomics spectra with over-crowded peaks and 2D spectra demonstrate the high efficiency of this automatic method.
-
Image denoising by exploring external and internal correlations.
Yue, Huanjing; Sun, Xiaoyan; Yang, Jingyu; Wu, Feng
2015-06-01
Single image denoising suffers from limited data collection within a noisy image. In this paper, we propose a novel image denoising scheme, which explores both internal and external correlations with the help of web images. For each noisy patch, we build internal and external data cubes by finding similar patches from the noisy and web images, respectively. We then propose reducing noise by a two-stage strategy using different filtering approaches. In the first stage, since the noisy patch may lead to inaccurate patch selection, we propose a graph based optimization method to improve patch matching accuracy in external denoising. The internal denoising is frequency truncation on internal cubes. By combining the internal and external denoising patches, we obtain a preliminary denoising result. In the second stage, we propose reducing noise by filtering of external and internal cubes, respectively, on transform domain. In this stage, the preliminary denoising result not only enhances the patch matching accuracy but also provides reliable estimates of filtering parameters. The final denoising image is obtained by fusing the external and internal filtering results. Experimental results show that our method constantly outperforms state-of-the-art denoising schemes in both subjective and objective quality measurements, e.g., it achieves >2 dB gain compared with BM3D at a wide range of noise levels.
-
Code of Federal Regulations, 2010 CFR
2010-07-01
... limited to factual corrections and responses to comments, the proponent and EPF may, with the prior..., the EPF must submit the Draft EIS and all of the above documents, with a new cover sheet indicating... more extensive modifications are required, the EPF must prepare a preliminary final EIS incorporating...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-22
...-Quality Steel Pipe From India: Final Affirmative Countervailing Duty Determination AGENCY: Import... exporters of circular welded carbon-quality steel pipe (``circular welded pipe'') from India. For... determination.\\1\\ \\1\\ See Circular Welded Carbon-Quality Steel Pipe From India: Preliminary Affirmative...
-
Spirituality and the Events of September 11: A Preliminary Study
ERIC Educational Resources Information Center
Briggs, Michele Kielty; Apple, Kevin J.; Aydlett, Ann E.
2004-01-01
Personal crises have been associated with spiritual growth. Sparked by the global response to the crisis of September 11, 2001, this study examined the relationship of spirituality and the September 11 tragedy using a sample of convenience from a college student population. This preliminary study used an experimental design to examine various…
-
Examining the Preliminary Efficacy of a Dating Violence Prevention Program for Hispanic Adolescents
ERIC Educational Resources Information Center
Gonzalez-Guarda, Rosa Maria; Guerra, Jessica E.; Cummings, Amanda A.; Pino, Karen; Becerra, Maria M.
2015-01-01
The purpose of this study is to evaluate the preliminary efficacy of a dating violence (DV) prevention program for Cuban American adolescents ("JOVEN"/YOUTH: "Juntos Opuestos a la Violence Entre Novios"/Together Against Dating Violence). A randomized-controlled experimental design with a delayed condition was used to evaluate…
-
CHINESE GRAMMARS AND THE COMPUTER AT THE OHIO STATE UNIVERSITY. PRELIMINARY REPORT.
ERIC Educational Resources Information Center
MEYERS, L.F.; YANG, J.
SAMPLE OUTPUT SENTENCES OF VARIOUS COMIT AND SNOBOL PROGRAMS FOR TESTING A CHINESE GENERATIVE GRAMMAR ARE PRESENTED. THE GRAMMAR CHOSEN FOR EXPERIMENTATION IS A PRELIMINARY VERSION OF A TRANSFORMATIONAL GRAMMAR. ALL OF THE COMIT PROGRAMS AND ONE OF THE SNOBOL PROGRAMS USE A LINEARIZED REPRESENTATION OF TREE STRUCTURES, WITH ADDITIONAL NUMERICAL…
-
The Incidence of Training-Related Job Placement of Draper Vocational Trainees: A Preliminary Report.
ERIC Educational Resources Information Center
Gwozdecki, Joseph; And Others
A preliminary survey of trainees' pre- and postrelease interactions with the State Employment Service (ES) was conducted by the Experimental Manpower Laboratory for Corrections (EMLC) as part of an overall evaluation of Manpower Development and Training (MDT) program effectiveness at Draper Correctional Center, Elmore, Alabama. Measures of the…
-
Comparison of Brain Activity during Drawing and Clay Sculpting: A Preliminary qEEG Study
ERIC Educational Resources Information Center
Kruk, Kerry A.; Aravich, Paul F.; Deaver, Sarah P.; deBeus, Roger
2014-01-01
A preliminary experimental study examined brain wave frequency patterns of female participants (N = 14) engaged in two different art making conditions: clay sculpting and drawing. After controlling for nonspecific effects of movement, quantitative electroencephalographic (qEEG) recordings were made of the bilateral medial frontal cortex and…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-25
...-Rolled Carbon-Quality Steel Products From Brazil: Final Results of Countervailing Duty Administrative... administrative review of the countervailing duty order on certain hot-rolled flat-rolled carbon- quality steel...-Quality Steel Products From Brazil: Preliminary Results of Countervailing Duty Administrative Review, 75...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-28
... Bags From Thailand: Final Results of Antidumping Duty Administrative Review AGENCY: Import... antidumping duty order on polyethylene retail carrier bags from Thailand. We gave interested parties an... Bags From Thailand: Preliminary Results of Antidumping Duty Administrative Review, 76 FR 30102 (May 24...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-12
... post-Preliminary Results surrogate value information to value factors of production (``FOP'') for the... value information from the Processors. \\2\\ This includes the Ad Hoc Shrimp Trade Action Committee... vannemei), banana prawn (Penaeus merguiensis), fleshy prawn (Penaeus chinensis), giant river prawn...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-04
... Facor did not experience significant differences in sales process/marketing support, freight/ delivery... Department re-examined Venus Wire's corporate affiliation relationship with Precision Metals for the instant administrative review. Because this relationship is unchanged from the 2005-2006 Final Results, 2007-2008 Final...
-
77 FR 36253 - Honey From Argentina: Final Results of Antidumping Duty Administrative Review
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-18
... Results of Antidumping Duty Administrative Review AGENCY: Import Administration, International Trade...) published its preliminary results of the 2009-2010 administrative review of the antidumping duty order on...-average dumping margins for the exporters are listed below in the ``Final Results of Review'' section of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-03
... India: Final Results of the Antidumping Duty Administrative Review AGENCY: Import Administration... duty order on stainless steel bar from India. The review covers shipments of subject merchandise to the... Bar From India: Preliminary Results and Partial Rescission of the Antidumping Duty Administrative...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-09
... Steel Flat Products From India: Final Rescission of Countervailing Duty Administrative Review AGENCY... hot-rolled carbon steel flat products from India. See Antidumping or Countervailing Duty Order... Flat Products from India: Preliminary Rescission of Countervailing Duty Administrative Review, 76 FR...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-08
... the People's Republic of China: Final Affirmative Countervailing Duty Determination AGENCY: Import... exporters of steel grating from the People's Republic of China (PRC). For information on the estimated... People's Republic of China: Preliminary Affirmative Countervailing Duty Determination and Alignment of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-22
... Film, Sheet, and Strip From Taiwan: Final Results of Antidumping Duty Administrative Review AGENCY... review of the antidumping duty order on polyethylene terephthalate film (PET Film) from Taiwan. See Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Preliminary Results of Antidumping Duty...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-12
... DEPARTMENT OF COMMERCE International Trade Administration [C-533-839] Carbazole Violet Pigment 23 from India: Extension of Time Limit for Final Results of Countervailing Duty Administrative Review... the preliminary results of the administrative review of the countervailing duty order on carbazole...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-16
... From the People's Republic of China: Final Results of Antidumping Duty Administrative Review AGENCY... on chlorinated isocyanurates (chlorinated isos) from the People's Republic of China (PRC). The period...'' section below. \\1\\ See Chlorinated Isocyanurates From the People's Republic of China: Preliminary Results...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-18
... DEPARTMENT OF COMMERCE International Trade Administration [A-428-840] Lightweight Thermal Paper... administrative review of the antidumping duty order on lightweight thermal paper from Germany.\\1\\ The period of... entitled ``Final Results of Review.'' \\1\\ See Lightweight Thermal Paper from Germany; Preliminary Results...
-
A new experimental method for the accelerated characterization of composite materials
NASA Technical Reports Server (NTRS)
Yeow, Y. T.; Morris, D. H.; Brinson, H. F.
1978-01-01
The use of composite materials for a variety of practical structural applications is presented and the need for an accelerated characterization procedure is assessed. A new experimental and analytical method is presented which allows the prediction of long term properties from short term tests. Some preliminary experimental results are presented.
-
NASA Technical Reports Server (NTRS)
Noever, David A.
2000-01-01
The effects of gravity in influencing the theoretical limit for bubble lattice coarsening and aging behavior, otherwise called von Neumann's law, is examined theoretically and experimentally. Preliminary microgravity results will be discussed.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-12
.... Wire decking is produced from carbon or alloy steel wire that has been welded into a mesh pattern. The.... See Surrogate Value Memorandum.\\14\\ In accordance with 19 CFR 351.301(c)(3)(i), for the final... value the FOPs within 40 days after the date of publication of the preliminary determination.\\15\\ \\14...
-
ERIC Educational Resources Information Center
California Univ., Los Angeles. Inst. of Library Research.
The general conclusions of the planning study on Mechanized Information Services in the University Library are that such services represent a desirable, even necessary, extension of the library's traditional functions. Preliminary specifications for such a library-based "Center for Information Services" (CIS) are presented in this report. Covered…
-
NASA Technical Reports Server (NTRS)
1971-01-01
The rotating fluidized bed reactor concept is being investigated for possible application in nuclear propulsion systems. Physics calculations show U-233 to be superior to U-235 as a fuel for a cavity reactor of this type. Preliminary estimates of the effect of hydrogen in the reactor, reflector material, and power peaking are given. A preliminary engineering analysis was made for U-235 and U-233 fueled systems. An evaluation of the parameters affecting the design of the system is given, along with the thrust-to-weight ratios. The experimental equipment is described, as are the special photographic techniques and procedures. Characteristics of the fluidized bed and experimental results are given, including photographic evidence of bed fluidization at high rotational velocities.
-
Design of impact-resistant boron/aluminum large fan blade
NASA Technical Reports Server (NTRS)
Salemme, C. T.; Yokel, S. A.
1978-01-01
The technical program was comprised of two technical tasks. Task 1 encompassed the preliminary boron/aluminum fan blade design effort. Two preliminary designs were evolved. An initial design consisted of 32 blades per stage and was based on material properties extracted from manufactured blades. A final design of 36 blades per stage was based on rule-of-mixture material properties. In Task 2, the selected preliminary blade design was refined via more sophisticated analytical tools. Detailed finite element stress analysis and aero performance analysis were carried out to determine blade material frequencies and directional stresses.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-25
...), filed an application for a successive preliminary permit, pursuant to section 4(f) of the Federal Power Act (FPA), proposing to study the feasibility of the Muskeget Channel Tidal Energy Project to be..., and one experimental turbine unit that would be used to test various open- bladed and helical tidal...
-
1987-06-15
001 GENERAL DYNAMICS 00 FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM Phase 2 Final Project Repc t JUNG 0 ?7 PROJECT 28 AUTOMATION...DYNAMICS FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM Phase 2 Final Project Report PROJECT 28 AUTOMATION OF RECEIVING, RECEIVING...13 6 PROJECT ASSUMPTIONS 20 7 PRELIMINARY/FINAL DESIGN AND FINDINGS 21 8 SYSTEM/EQUIPMENT/MACHINING SPECIFICATIONS 37 9 VENDOR/ INDUSTRY ANALYSIS
-
Two Bull Mine - Div. of Mining, Land, and Water
27.21.080(d) and 11 AAC 90.129(b). DMLW - Mining is issuing a Final Findings of Fact and Decision for the renewal of the Two Bull Mine permit. Final Findings and Decision PDF (9/2/2016) Public Notice of Final Findings and Decision PDF (9/2/2016) Preliminary Findings of Fact PDF (3/11/2016) Public Notice PDF (3/11
-
Experimental Investigation of Magnesium Powder Combustion With C02 for Mars Ascent Applications
NASA Technical Reports Server (NTRS)
Foote, John P.; Litchford, Ronald J.
2005-01-01
Combustion of metals with CO2 has been identified as a possible propellant for Mars ascent applications. CO2 could be condensed from the Martian atmosphere, reducing the amount of propellant that must be transported from Earth. An attractive feature of this approach compared to other in situ propellant concepts is that no chemical processing on Mars is required. Magnesium has been identified as the most promising metal for this application because it ignites and burns easily in CO2. Preliminary systems studies indicate a 2 to 1 delivered mass advantage for Mg ascent propulsion using in situ C02, as compared to a conventional storable propellant system. The Propulsion Research Center at MSFC is undertaking an experimental investigation of magnesium powder combustion with CO2 in order to provide fundamental data on the combustion performance of Mg powder + CO2 mixtures needed to assess the feasibility of developing a practical Mg powder + CO2 rocket engine. Initial combustion experiments will be carried out in a small scale atmospheric pressure dump combustor. Effects of varying the Mg particle size, firing rate and O/F ratio on combustion stability and efficiency will be investigated. The combustion process will be characterized by optical flame measurements and extraction of combustion product samples. The experimental facility is currently being prepared and combustion experiments will begin during the first quarter of 2005. The final paper will describe the test facility and initial experimental results.
-
Advanced high temperature static strain sensor development
NASA Technical Reports Server (NTRS)
Hulse, C. O.; Stetson, K. A.; Grant, H. P.; Jameikis, S. M.; Morey, W. W.; Raymondo, P.; Grudkowski, T. W.; Bailey, R. S.
1986-01-01
An examination was made into various techniques to be used to measure static strain in gas turbine liners at temperatures up to 1150 K (1600 F). The methods evaluated included thin film and wire resistive devices, optical fibers, surface acoustic waves, the laser speckle technique with a heterodyne readout, optical surface image and reflective approaches and capacitive devices. A preliminary experimental program to develop a thin film capacitive device was dropped because calculations showed that it would be too sensitive to thermal gradients. In a final evaluation program, the laser speckle technique appeared to work well up to 1150 K when it was used through a relatively stagnant air path. The surface guided acoustic wave approach appeared to be interesting but to require too much development effort for the funds available. Efforts to develop a FeCrAl resistive strain gage system were only partially successful and this part of the effort was finally reduced to a characterization study of the properties of the 25 micron diameter FeCrAl (Kanthal A-1) wire. It was concluded that this particular alloy was not suitable for use as the resistive element in a strain gage above about 1000 K.
-
Advanced high temperature static strain sensor development
NASA Astrophysics Data System (ADS)
Hulse, C. O.; Stetson, K. A.; Grant, H. P.; Jameikis, S. M.; Morey, W. W.; Raymondo, P.; Grudkowski, T. W.; Bailey, R. S.
1986-08-01
An examination was made into various techniques to be used to measure static strain in gas turbine liners at temperatures up to 1150 K (1600 F). The methods evaluated included thin film and wire resistive devices, optical fibers, surface acoustic waves, the laser speckle technique with a heterodyne readout, optical surface image and reflective approaches and capacitive devices. A preliminary experimental program to develop a thin film capacitive device was dropped because calculations showed that it would be too sensitive to thermal gradients. In a final evaluation program, the laser speckle technique appeared to work well up to 1150 K when it was used through a relatively stagnant air path. The surface guided acoustic wave approach appeared to be interesting but to require too much development effort for the funds available. Efforts to develop a FeCrAl resistive strain gage system were only partially successful and this part of the effort was finally reduced to a characterization study of the properties of the 25 micron diameter FeCrAl (Kanthal A-1) wire. It was concluded that this particular alloy was not suitable for use as the resistive element in a strain gage above about 1000 K.
-
An evolution of technologies and applications of gamma imagers in the nuclear cycle industry
DOE Office of Scientific and Technical Information (OSTI.GOV)
Khalil, R. A.; Carrel, F.; Menaa, N.
The tracking of radiation contamination and distribution has become a high priority in the nuclear cycle industry in order to respect the ALARA principle which is a main challenge during decontamination and dismantling activities. To support this need, AREVA/CANBERRA and CEA LIST have been actively carrying out research and development on a gamma-radiation imager. In this paper we will present the new generation of gamma camera, called GAMPIX. This system is based on the Timepix chip, hybridized with a CdTe substrate. A coded mask could be used in order to increase the sensitivity of the camera. Moreover, due to themore » USB connection with a standard computer, this gamma camera is immediately operational and user-friendly. The final system is a very compact gamma camera (global weight is less than 1 kg without any shielding) which could be used as a hand-held device for radioprotection purposes. In this article, we present the main characteristics of this new generation of gamma camera and we expose experimental results obtained during in situ measurements. Even though we present preliminary results the final product is under industrialization phase to address various applications specifications. (authors)« less
-
An optical method for characterizing carbon content in ceramic pot filters.
Goodwin, J Y; Elmore, A C; Salvinelli, C; Reidmeyer, Mary R
2017-08-01
Ceramic pot filter (CPF) technology is a relatively common means of household water treatment in developing areas, and performance characteristics of CPFs have been characterized using production CPFs, experimental CPFs fabricated in research laboratories, and ceramic disks intended to be CPF surrogates. There is evidence that CPF manufacturers do not always fire their products according to best practices and the result is incomplete combustion of the pore forming material and the creation of a carbon core in the final CPFs. Researchers seldom acknowledge the existence of potential existence of carbon cores, and at least one CPF producer has postulated that the carbon may be beneficial in terms of final water quality because of the presence of activated carbon in consumer filters marketed in the Western world. An initial step in characterizing the presence and impact of carbon cores is the characterization of those cores. An optical method which may be more viable to producers relative to off-site laboratory analysis of carbon content has been developed and verified. The use of the optical method is demonstrated via preliminary disinfection and flowrate studies, and the results of these studies indicate that the method may be of use in studying production kiln operation.
-
Feature Extraction for Track Section Status Classification Based on UGW Signals
Yang, Yuan; Shi, Lin
2018-01-01
Track status classification is essential for the stability and safety of railway operations nowadays, when railway networks are becoming more and more complex and broad. In this situation, monitoring systems are already a key element in applications dedicated to evaluating the status of a certain track section, often determining whether it is free or occupied by a train. Different technologies have already been involved in the design of monitoring systems, including ultrasonic guided waves (UGW). This work proposes the use of the UGW signals captured by a track monitoring system to extract the features that are relevant for determining the corresponding track section status. For that purpose, three features of UGW signals have been considered: the root mean square value, the energy, and the main frequency components. Experimental results successfully validated how these features can be used to classify the track section status into free, occupied and broken. Furthermore, spatial and temporal dependencies among these features were analysed in order to show how they can improve the final classification performance. Finally, a preliminary high-level classification system based on deep learning networks has been envisaged for future works. PMID:29673156
-
Experimental studies of dead-wood biodiversity - A review identifying global gaps in knowledge
Sebastian Seibold; Claus Bässler; Roland Brandl; Martin M. Gossner; Simon Thorn; Michael D. Ulyshen; Jörg Müller
2015-01-01
The importance of dead wood for biodiversity is widely recognized but strategies for conservation exist only in some regions worldwide. Most strategies combine knowledge from observational and experimental studies but remain preliminary as many facets of the complex relationships are unstudied. In this first global review of 79 experimental studies addressing...
-
Numerical Prediction of SERN Performance using WIND code
NASA Technical Reports Server (NTRS)
Engblom, W. A.
2003-01-01
Computational results are presented for the performance and flow behavior of single-expansion ramp nozzles (SERNs) during overexpanded operation and transonic flight. Three-dimensional Reynolds-Averaged Navier Stokes (RANS) results are obtained for two vehicle configurations, including the NASP Model 5B and ISTAR RBCC (a variant of X-43B) using the WIND code. Numerical predictions for nozzle integrated forces and pitch moments are directly compared to experimental data for the NASP Model 5B, and adequate-to-excellent agreement is found. The sensitivity of SERN performance and separation phenomena to freestream static pressure and Mach number is demonstrated via a matrix of cases for both vehicles. 3-D separation regions are shown to be induced by either lateral (e.g., sidewall) shocks or vertical (e.g., cowl trailing edge) shocks. Finally, the implications of this work to future preliminary design efforts involving SERNs are discussed.
-
Soft chitosan microbeads scaffold for 3D functional neuronal networks.
Tedesco, Maria Teresa; Di Lisa, Donatella; Massobrio, Paolo; Colistra, Nicolò; Pesce, Mattia; Catelani, Tiziano; Dellacasa, Elena; Raiteri, Roberto; Martinoia, Sergio; Pastorino, Laura
2018-02-01
The availability of 3D biomimetic in vitro neuronal networks of mammalian neurons represents a pivotal step for the development of brain-on-a-chip experimental models to study neuronal (dys)functions and particularly neuronal connectivity. The use of hydrogel-based scaffolds for 3D cell cultures has been extensively studied in the last years. However, limited work on biomimetic 3D neuronal cultures has been carried out to date. In this respect, here we investigated the use of a widely popular polysaccharide, chitosan (CHI), for the fabrication of a microbead based 3D scaffold to be coupled to primary neuronal cells. CHI microbeads were characterized by optical and atomic force microscopies. The cell/scaffold interaction was deeply characterized by transmission electron microscopy and by immunocytochemistry using confocal microscopy. Finally, a preliminary electrophysiological characterization by micro-electrode arrays was carried out. Copyright © 2017 Elsevier Ltd. All rights reserved.
-
An aerodynamic design and numerical investigation of transonic centrifugal compressor stage
NASA Astrophysics Data System (ADS)
Yi, Weilin; Ji, Lucheng; Tian, Yong; Shao, Weiwei; Li, Weiwei; Xiao, Yunhan
2011-09-01
In the present paper, the design of a transonic centrifugal compressor stage with the inlet relative Mach number about 1.3 and detailed flow field investigation by three-dimensional CFD are described. Firstly the CFD program was validated by an experimental case. Then the preliminary aerodynamic design of stage completed through in-house one-dimensional code. Three types of impellers and two sets of stages were computed and analyzed. It can be found that the swept shape of leading edge has prominent influence on the performance and can enlarge the flow range. Similarly, the performance of the stage with swept impeller is better than others. The total pressure ratio and adiabatic efficiency of final geometry achieve 7:1 and 80% respectively. The vane diffuser with same airfoils along span increases attack angle at higher span, and the local flow structure and performance is deteriorated.
-
Fabrication and evaluation of cold/formed/weldbrazed beta-titanium skin-stiffened compression panels
NASA Technical Reports Server (NTRS)
Royster, D. M.; Bales, T. T.; Davis, R. C.; Wiant, H. R.
1983-01-01
The room temperature and elevated temperature buckling behavior of cold formed beta titanium hat shaped stiffeners joined by weld brazing to alpha-beta titanium skins was determined. A preliminary set of single stiffener compression panels were used to develop a data base for material and panel properties. These panels were tested at room temperature and 316 C (600 F). A final set of multistiffener compression panels were fabricated for room temperature tests by the process developed in making the single stiffener panels. The overall geometrical dimensions for the multistiffener panels were determined by the structural sizing computer code PASCO. The data presented from the panel tests include load shortening curves, local buckling strengths, and failure loads. Experimental buckling loads are compared with the buckling loads predicted by the PASCO code. Material property data obtained from tests of ASTM standard dogbone specimens are also presented.
-
Declassification of radioactive water from a pool type reactor after nuclear facility dismantling
NASA Astrophysics Data System (ADS)
Arnal, J. M.; Sancho, M.; García-Fayos, B.; Verdú, G.; Serrano, C.; Ruiz-Martínez, J. T.
2017-09-01
This work is aimed to the treatment of the radioactive water from a dismantled nuclear facility with an experimental pool type reactor. The main objective of the treatment is to declassify the maximum volume of water and thus decrease the volume of radioactive liquid waste to be managed. In a preliminary stage, simulation of treatment by the combination of reverse osmosis (RO) and evaporation have been performed. Predicted results showed that the combination of membrane and evaporation technologies would result in a volume reduction factor higher than 600. The estimated time to complete the treatment was around 650 h (25-30 days). For different economical and organizational reasons which are explained in this paper, the final treatment of the real waste had to be reduced and only evaporation was applied. The volume reduction factor achieved in the real treatment was around 170, and the time spent for treatment was 194 days.
-
Washington, Wendy Donlin; Banna, Kelly M; Gibson, Amanda L
2014-01-01
An estimated 30% of Americans meet the criteria for obesity. Effective, low-cost interventions to increase physical activity are needed to prevent and treat obesity. In this study, 11 healthy adults wore Fitbit accelerometers for 3 weeks. During the initial baseline, subjects earned prize draws for wearing the Fitbit. During intervention, percentile schedules were used to calculate individual prize-draw criteria. The final week was a return to baseline. Four subjects increased step counts as a result of the intervention. A bout analysis of interresponse times revealed that subjects increased overall step counts by increasing daily minutes active and within-bout response rates and decreasing pauses between bouts of activity. Strategies to improve effectiveness are suggested, such as modification of reinforcement probability and amount and identification of the function of periods of inactivity. © Society for the Experimental Analysis of Behavior.
-
Fantoni, Frédéric; Hervé, Lionel; Poher, Vincent; Gioux, Sylvain; Mars, Jérôme I; Dinten, Jean-Marc
2014-01-01
Intraoperative fluorescence imaging in reflectance geometry is an attractive imaging modality to noninvasively monitor fluorescence-targeted tumors. In some situations, this kind of imaging suffers from poor resolution due to the diffusive nature of photons in tissue. The objective of the proposed technique is to tackle this limitation. It relies on the scanning of the medium with a laser line illumination and the acquisition of images at each position of excitation. The detection scheme proposed takes advantage of the stack of images acquired to enhance the resolution and the contrast of the final image. The experimental protocol is described to fully understand why we overpass the classical limits and validate the scheme on tissue-like phantoms and in vivo with a preliminary testing. The results are compared with those obtained with a classical wide-field illumination.
-
Experimental study on hydraulic characteristic around trash rack of a pumping station
NASA Astrophysics Data System (ADS)
Zhou, MinZhe; Li, TongChun; Lin, XiangYang; Liu, XiaoQing; Ding, Yuan; Liu, GuangYuan
2017-11-01
This paper focuses on flow pattern around trash rack of intake of a pumping station project. This pumping station undertake the task of supplying up to 3,500,000 m3 water per day for a megacity. Considering the large flow rate, high lift, multi-pipe supply and long-time operation in this water conveyance pumping station, we built a physical model test to measure the flow velocity and observe the flow pattern to verify the reasonability of preliminary design. In this test, we set 3 layers of current meters around each trash rack of intake in reservoir to collect the flow velocity. Furthermore, we design 2 operating conditions of 9 pumps to observe the change of flow pattern. Finally, we found the velocity data were in a normal range under 2 different operating conditions of the 9 pump units.
-
Development of an Active Twist Rotor for Wind: Tunnel Testing (NLPN97-310
NASA Technical Reports Server (NTRS)
Cesnik, Carlos E. S.; Shin, SangJoon; Hagood, Nesbitt W., IV
1998-01-01
The development of the Active Twist Rotor prototype blade for hub vibration and noise reduction studies is presented in this report. Details of the modeling, design, and manufacturing are explored. The rotor blade is integrally twisted by direct strain actuation. This is accomplished by distributing embedded piezoelectric fiber composites along the span of the blade. The development of the analysis framework for this type of active blade is presented. The requirements for the prototype blade, along with the final design results are also presented. A detail discussion on the manufacturing aspects of the prototype blade is described. Experimental structural characteristics of the prototype blade compare well with design goals, and preliminary bench actuation tests show lower performance than originally predicted. Electrical difficulties with the actuators are also discussed. The presented prototype blade is leading to a complete fully articulated four-blade active twist rotor system for future wind tunnel tests.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-26
... of Sales at Less Than Fair Market Value: Synthetic Indigo From the People's Republic of China, 65 FR... Brightening Agents From the People's Republic of China: Final Determination of Sales at Less Than Fair Value... China (``PRC'').\\1\\ The Department invited interested parties to comment on the Preliminary...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-16
... Review; 2011-2012, 78 FR 56209, 56210 (September 12, 2013) (``PRC Shrimp AR7 Final''). \\4\\ See, e.g...: Effective Date: December 16, 2013. FOR FURTHER INFORMATION CONTACT: Kabir Archuletta, AD/CVD Operations....\\9\\ On February 27, 2013, the Department published in the Federal Register its Preliminary...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-28
... DEPARTMENT OF COMMERCE International Trade Administration [A-570-905] Certain Polyester Staple... Preliminary Results of the 2011-2012 administrative review of the antidumping duty order on certain polyester... dumping margin is listed in the ``Final Results of Review'' section below. \\1\\ See Certain Polyester...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-04
... expense for Trelleborg Wheel Systems China's raw materials purchased in market economies, and replaced... economy purchases, per information Trelleborg Wheel Systems China submitted after the Preliminary Results...-the-Road Tires From the People's Republic of China: Final Results of Antidumping Duty New Shipper...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-02
... Fittings From the People's Republic of China: Final Results of Antidumping Duty Administrative Review... (``pipe fittings'') from the People's Republic of China (``PRC'').\\1\\ We gave interested parties an... Fittings From the People's Republic of China: Preliminary Results of Antidumping Duty Administrative Review...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-18
... People's Republic of China; Final Results of Third Antidumping Duty Administrative Review; 2010-2011... on certain steel nails from the People's Republic of China (``PRC'') on September 4, 2012.\\1\\ The... from the People's Republic of China: Preliminary Results and Partial Rescission of the Third...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-18
...-Quality Steel Pipe From India: Postponement of Final Determination of Antidumping Duty Investigation...- quality steel pipe from India.\\1\\ On June 1, 2012, the Department published its preliminary determination... is currently due on August 6, 2012. \\1\\ See Circular Welded Carbon-Quality Steel Pipe from India, the...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-27
... Film, Sheet, and Strip From India: Final Results of Antidumping Duty New Shipper Review AGENCY: Import... polyethylene terephthalate film, sheet and strip (PET Film) from India for SRF Limited (SRF), covering the... Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of Antidumping Duty New...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-25
... Film, Sheet, and Strip From the United Arab Emirates: Final Results of Antidumping Duty Administrative... of administrative review of the antidumping duty order on polyethylene terephthalate film (PET Film... Polyethylene Terephthalate Film, Sheet, and Strip From the United Arab Emirates: Preliminary Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-09
... Film, Sheet, and Strip From India: Final Results of Antidumping Duty Administrative Review AGENCY... review of the antidumping duty order on polyethylene terephthalate film (PET Film) from India.\\1\\ This...'' section below. \\1\\ See Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-04
... Film, Sheet, and Strip From the United Arab Emirates: Final Results of Antidumping Duty Administrative... administrative review of the antidumping duty order on polyethylene terephthalate film (PET Film) from the United.... \\1\\ See Polyethylene Terephthalate Film, Sheet, and Strip from the United Arab Emirates: Preliminary...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-21
... Film, Sheet, and Strip From the United Arab Emirates: Final Results of Antidumping Duty Administrative... preliminary results of administrative review of the antidumping duty order on polyethylene terephthalate film (PET Film) from the United Arab Emirates.\\1\\ This review covers two producers/exporters of subject...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-03
... Register the preliminary results of the administrative review of the antidumping duty order on CVP 23 from... DEPARTMENT OF COMMERCE International Trade Administration [A-533-838] Carbazole Violet Pigment 23 From India: Extension of Time Limit for Final Results of Antidumping Duty Administrative Review AGENCY...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-22
... From the People's Republic of China: Final Results of Antidumping Duty Administrative Review; 2010-2011... People's Republic of China (PRC).\\1\\ The period of review (POR) for this administrative review was June 1... Isocyanurates From the People's Republic of China: Preliminary Results of Antidumping Duty Administrative Review...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-01
... Bags From Indonesia: Final Determination of Sales at Less Than Fair Value AGENCY: Import Administration...) has determined that imports of polyethylene retail carrier bags (PRCBs) from Indonesia are being, or... Retail Carrier Bags from Indonesia: Preliminary Determination of Sales at Less Than Fair Value and...
-
Space station final study report. Volume 1: Executive summary
NASA Technical Reports Server (NTRS)
1987-01-01
Volume 1 of the Final Study Report provides an Executive Summary of the Phase B study effort conducted under contract NAS8-36526. Space station Phase B implementation resulted in the timely establishment of preliminary design tasks, including trades and analyses. A comprehensive summary of project activities in conducting this study effort is included.
-
14 CFR 60.21 - Interim qualification of FSTDs for new aircraft types or models.
Code of Federal Regulations, 2011 CFR
2011-01-01
... aircraft, even though the aircraft manufacturer's aircraft data package is preliminary, if the sponsor...) Within twelve months of the release of the final aircraft data package by the aircraft manufacturer, but... apply for initial qualification in accordance with § 60.15 based on the final aircraft data package...
-
14 CFR 60.21 - Interim qualification of FSTDs for new aircraft types or models.
Code of Federal Regulations, 2014 CFR
2014-01-01
... aircraft, even though the aircraft manufacturer's aircraft data package is preliminary, if the sponsor...) Within twelve months of the release of the final aircraft data package by the aircraft manufacturer, but... apply for initial qualification in accordance with § 60.15 based on the final aircraft data package...
-
14 CFR 60.21 - Interim qualification of FSTDs for new aircraft types or models.
Code of Federal Regulations, 2010 CFR
2010-01-01
... aircraft, even though the aircraft manufacturer's aircraft data package is preliminary, if the sponsor...) Within twelve months of the release of the final aircraft data package by the aircraft manufacturer, but... apply for initial qualification in accordance with § 60.15 based on the final aircraft data package...
-
14 CFR 60.21 - Interim qualification of FSTDs for new aircraft types or models.
Code of Federal Regulations, 2013 CFR
2013-01-01
... aircraft, even though the aircraft manufacturer's aircraft data package is preliminary, if the sponsor...) Within twelve months of the release of the final aircraft data package by the aircraft manufacturer, but... apply for initial qualification in accordance with § 60.15 based on the final aircraft data package...
-
14 CFR 60.21 - Interim qualification of FSTDs for new aircraft types or models.
Code of Federal Regulations, 2012 CFR
2012-01-01
... aircraft, even though the aircraft manufacturer's aircraft data package is preliminary, if the sponsor...) Within twelve months of the release of the final aircraft data package by the aircraft manufacturer, but... apply for initial qualification in accordance with § 60.15 based on the final aircraft data package...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-15
...-Diphosphonic Acid From India: Final Results of Antidumping Duty Administrative Review AGENCY: Import... the antidumping duty order on 1-Hydroxyethylidene-1, 1-Diphosphonic Acid from India. The review covers...-Diphosphonic Acid from India (76 FR 78237). We invited parties to comment on the preliminary results of the...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-06
... Pipes and Tubes From Turkey; Final Results of Antidumping Duty Administrative Review; 2010 to 2011... tubes from Turkey.\\1\\ This review covers four producers and exporters of subject merchandise: Borusan....'' \\1\\ See Circular Welded Carbon Steel Pipes and Tubes From Turkey: Notice of Preliminary Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-19
... Pipe and Tube From Turkey; Notice of Final Results of Antidumping Duty Administrative Review AGENCY... pipe and tube from Turkey. See Light-Walled Rectangular Pipe and Tube From Turkey; Notice of... order covering light- walled rectangular pipe and tube from Turkey. See Preliminary Results. The...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-28
... from the People's Republic of China: Final Results of Antidumping Duty Administrative Review AGENCY... the People's Republic of China (PRC). See Carbazole Violet Pigment 23 From the People's Republic of... (December 29, 2009) (Preliminary Results). This administrative review covers one exporter of the subject...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-07
... 15, 2010) (Preliminary Results). The review covers one producer/exporter, Quimica Amtex, S.A. de C.V... Carboxymethylcellulose from Mexico: Final Determination Analysis Memorandum for Quimica Amtex, S.A. de C.V.,'' dated... June 30, 2009, is as follows: Weighted- average Producer/exporter margin (percentage) Quimica Amtex, S...
-
77 FR 65670 - Honey From Argentina: Final Rescission of Antidumping Duty New Shipper Review
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-30
... DEPARTMENT OF COMMERCE International Trade Administration [A-357-812] Honey From Argentina: Final... order on honey from Argentina for the period of December 1, 2010, through November 30, 2011.\\1\\ We...\\ See Honey from Argentina: Preliminary Rescission of Antidumping Duty New Shipper Review, 77 FR 45334...
-
Preliminary results of the large experimental wind turbine phase of the national wind energy program
NASA Technical Reports Server (NTRS)
Thomas, R. L.; Sholes, T.; Sholes, J. E.
1975-01-01
The preliminary results of two projects in the development phase of reliable wind turbines designed to supply cost-competitive electrical energy were discussed. An experimental 100 kW wind turbine design and its status are first reviewed. The results of two parallel design studies for determining the configurations and power levels for wind turbines with minimum energy costs are also discussed. These studies predict wind energy costs of 1.5 to 7 cents per kW-h for wind turbines produced in quantities of 100 to 1000 per year and located at sites having average winds of 12 to 18 mph.
-
1988-02-01
57 Summary--"Comments from Dr. Hans Burcharth" ............81 "Strength of Armour Blocks...335 APPENDICES........................................................ 387 A--"Strength of Concrete Armour Units for Breakwaters"’ --Delft...STAT!STICS DESIGN WAVE CLIMATE PRELIMINARY DESIGN CALCULATION OF ARMOUR STABILIY ETC MODEL TESTS OF PRELIMINARY DESIGN FINAL DESIGN Figure 1. Ideal
-
NASA Technical Reports Server (NTRS)
Deckert, George
2010-01-01
This viewgraph presentation reviews The NASA Hazard Analysis process. The contents include: 1) Significant Incidents and Close Calls in Human Spaceflight; 2) Subsystem Safety Engineering Through the Project Life Cycle; 3) The Risk Informed Design Process; 4) Types of NASA Hazard Analysis; 5) Preliminary Hazard Analysis (PHA); 6) Hazard Analysis Process; 7) Identify Hazardous Conditions; 8) Consider All Interfaces; 9) Work a Preliminary Hazard List; 10) NASA Generic Hazards List; and 11) Final Thoughts
-
Experimental analysis of armouring process
NASA Astrophysics Data System (ADS)
Lamberti, Alberto; Paris, Ennio
Preliminary results from an experimental investigation on armouring processes are presented. Particularly, the process of development and formation of the armour layer under different steady flow conditions has been analyzed in terms of grain size variations and sediment transport rate associated to each size fraction.
-
Natural Channel Design Review Checklist
This document presents a brief description of the checklist items by the following sections: Watershed and Geomorphic Assessment, Preliminary Design, Final Design, and Maintenance and Monitoring Plans.
-
Perchlorate Regulatory Determination Fact Sheets
Fact sheets have been developed for the perchlorate regulatory determination corresponding to the following stages published in the Federal Register: Final, Supplemental request for comments, and Preliminary.
-
NASA Astrophysics Data System (ADS)
Peters, S. T.; Schroeder, D. M.; Romero-Wolf, A.; Haynes, M.
2017-12-01
The Radar for Icy Moon Exploration (RIME) and the Radar for Europa Assessment and Sounding: Ocean to Near-surface (REASON) have been identified as potential candidates for the implementation of passive sounding as additional observing modes for the ESA and NASA missions to Ganymede and Europa. Recent work has shown the theoretical potential for Jupiter's decametric radiation to be used as a source for passive radio sounding of its icy moons. We are further developing and adapting this geophysical approach for use in terrestrial glaciology. Here, we present results from preliminary field testing of a prototype passive radio sounder from cliffs along the California coast. This includes both using a Lloyd's mirror to measure the Sun's direct path and its reflection off the ocean's surface and exploiting autocorrelation to detect the delay time of the echo. This is the first in-situ demonstration of the autocorrelation-based passive-sounding approach using an astronomical white noise signal. We also discuss preliminary field tests on rougher terrestrial and subglacial surfaces, including at Store Glacier in Greenland. Additionally, we present modeling and experimental results that demonstrate the feasibility of applying presumming approaches to the autocorrelations to achieve coherent gain from an inherently random signal. We note that while recording with wider bandwidths and greater delays places fundamental limits on the Lloyd's mirror approach, our new autocorrelation method has no such limitation. Furthermore, we show how achieving wide bandwidths via spectral-stitching methods allows us to obtain a finer range resolution than given by the receiver's instantaneous bandwidth. Finally, we discuss the potential for this technique to eliminate the need for active transmitters in certain types of ice sounding experiments, thereby reducing the complexity, power consumption, and cost of systems and observations.
-
ERIC Educational Resources Information Center
Almond, Russell; Deane, Paul; Quinlan, Thomas; Wagner, Michael; Sydorenko, Tetyana
2012-01-01
The Fall 2007 and Spring 2008 pilot tests for the "CBAL"™ Writing assessment included experimental keystroke logging capabilities. This report documents the approaches used to capture the keystroke logs and the algorithms used to process the outputs. It also includes some preliminary findings based on the pilot data. In particular, it…
-
The Problem of Size in Robust Design
NASA Technical Reports Server (NTRS)
Koch, Patrick N.; Allen, Janet K.; Mistree, Farrokh; Mavris, Dimitri
1997-01-01
To facilitate the effective solution of multidisciplinary, multiobjective complex design problems, a departure from the traditional parametric design analysis and single objective optimization approaches is necessary in the preliminary stages of design. A necessary tradeoff becomes one of efficiency vs. accuracy as approximate models are sought to allow fast analysis and effective exploration of a preliminary design space. In this paper we apply a general robust design approach for efficient and comprehensive preliminary design to a large complex system: a high speed civil transport (HSCT) aircraft. Specifically, we investigate the HSCT wing configuration design, incorporating life cycle economic uncertainties to identify economically robust solutions. The approach is built on the foundation of statistical experimentation and modeling techniques and robust design principles, and is specialized through incorporation of the compromise Decision Support Problem for multiobjective design. For large problems however, as in the HSCT example, this robust design approach developed for efficient and comprehensive design breaks down with the problem of size - combinatorial explosion in experimentation and model building with number of variables -and both efficiency and accuracy are sacrificed. Our focus in this paper is on identifying and discussing the implications and open issues associated with the problem of size for the preliminary design of large complex systems.
-
NASA Astrophysics Data System (ADS)
Wan, Fubin; Tan, Yuanyuan; Jiang, Zhenhua; Chen, Xun; Wu, Yinong; Zhao, Peng
2017-12-01
Lifetime and reliability are the two performance parameters of premium importance for modern space Stirling-type pulse tube refrigerators (SPTRs), which are required to operate in excess of 10 years. Demonstration of these parameters provides a significant challenge. This paper proposes a lifetime prediction and reliability estimation method that utilizes accelerated degradation testing (ADT) for SPTRs related to gaseous contamination failure. The method was experimentally validated via three groups of gaseous contamination ADT. First, the performance degradation model based on mechanism of contamination failure and material outgassing characteristics of SPTRs was established. Next, a preliminary test was performed to determine whether the mechanism of contamination failure of the SPTRs during ADT is consistent with normal life testing. Subsequently, the experimental program of ADT was designed for SPTRs. Then, three groups of gaseous contamination ADT were performed at elevated ambient temperatures of 40 °C, 50 °C, and 60 °C, respectively and the estimated lifetimes of the SPTRs under normal condition were obtained through acceleration model (Arrhenius model). The results show good fitting of the degradation model with the experimental data. Finally, we obtained the reliability estimation of SPTRs through using the Weibull distribution. The proposed novel methodology enables us to take less than one year time to estimate the reliability of the SPTRs designed for more than 10 years.
-
Quiet Clean Short-Haul Experimental Engine (QCSEE). Preliminary analyses and design report, volume 2
NASA Technical Reports Server (NTRS)
1974-01-01
The experimental and flight propulsion systems are presented. The following areas are discussed: engine core and low pressure turbine design; bearings and seals design; controls and accessories design; nacelle aerodynamic design; nacelle mechanical design; weight; and aircraft systems design.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-25
... Ratios: For the final results, in Goodyear India Limited's financial statement we have: excluded a... RSOFT Comment 11: Selection and Calculation of Financial Ratios Comment 12: Whether to Grant MOE... interested parties to comment on our Preliminary Results. Based on our analysis of the comments received, we...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-21
... Steel Pipes and Tubes From Thailand: Extension of Time Limit for Final Results of Antidumping Duty... carbon steel pipes and tubes from Thailand. See Circular Welded Carbon Steel Pipes and Tubes from Thailand: Preliminary Results and Rescission, in Part, of Antidumping Duty Administrative Review, 75 FR...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-14
... DEPARTMENT OF COMMERCE International Trade Administration [A-533-810] Stainless Steel Bar From India: Extension of Time Limit for the Final Results of the 2009-2010 Antidumping Duty Administrative... Stainless Steel Bar From India: Preliminary Results of, and Partial Rescission of, the Antidumping Duty...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-17
... Germany: Extension of Time Limit for the Final Results of Antidumping Duty Administrative Review AGENCY... administrative review of the antidumping duty order on brass sheet and strip from Germany covering one respondent... Sheet and Strip From Germany: Preliminary Results of Antidumping Duty Administrative Review, 75 FR 18801...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-09
... Determination of Sales at Less Than Fair Value and Final Negative Determination of Critical Circumstances, 74 FR..., and Affirmative Critical Circumstances, In Part: Certain Lined Paper Products From the People's Republic of China, 71 FR 53079 (September 8, 2006) (``Lined Paper from the PRC''); Final Determination of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-12
... Film, Sheet, and Strip From the People's Republic of China: Final Results of the 2009-2010 Antidumping... review of polyethylene terephthalate film, sheet, and strip (``PET film'') from the People's Republic of... this review. We invited interested parties to comment on our Preliminary Results. Based on our analysis...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-12
... and Tube From the People's Republic of China: Final Results and Partial Revocation of 2010/11... and tube (``copper pipe and tube'') from the People's Republic of China (``PRC''). The period of... published Seamless Refined Copper Pipe and Tube From the People's Republic of China: Preliminary Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-21
... Wire Strand From the People's Republic of China: Final Determination of Sales at Less Than Fair Value... Steel Wire Strand From the People's Republic of China: Preliminary Determination of Sales at Less Than... Antidumping Duty Investigation of Prestressed Concrete Steel Wire Strand From the People's Republic of China...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-07
... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers From the People's Republic of China: Extension of Time Limit for Final Results of the Antidumping Duty...'') published the preliminary results of this administrative review. See Steel Wire Garment Hangers From the...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-08
... or coatings, such as plain oil finish as a temporary rust protectant, zinc coating (i.e., galvanized... (January 5, 2012). \\9\\ See, e.g., Certain Tissue Paper Products from the People's Republic of China... Certain Tissue Paper Products from the People's Republic of China: Final Results and Final Rescission, in...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-09
... Film, Sheet and Strip From India: Extension of Time Limit for Final Results of Countervailing Duty New... terephthalate film, sheet and strip from India for SRF Limited (SRF), covering the period January 1, 2009, through December 31, 2009. See Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-09
... Film, Sheet and Strip From India: Extension of Time Limit for Final Results of Antidumping Duty New... terephthalate film, sheet and strip from India for SRF Limited (SRF) covering the period July 1, 2009, through December 31, 2009. See Polyethylene Terephthalate Film, Sheet and Strip from India: Preliminary Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-12
... Certain Cut-to-Length Carbon Steel Plate From Ukraine; Final Results of Antidumping Duty Administrative...) published the preliminary results of an administrative review of the suspension agreement on certain cut-to... Agreement on Certain Cut-to-Length Carbon Steel Plate From Ukraine; Administrative Review, 78 FR 46570...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-11
... Fiber From the People's Republic of China: Final Results of Antidumping Duty Administrative Review; 2010... staple fiber (``PSF'') from the People's Republic of China (``PRC'').\\1\\ We gave interested parties an opportunity to comment on the Preliminary Results. Based upon our analysis of the comments and information...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-26
... Comment 19: Value Added Tax and Import Duties in the HRS Benchmark Used to Calculate CS Wind's Benefit...: Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination, 77 FR... of HRS Benchmark Provision of Electricity for LTAR Comment 16: Electricity Benchmarks Tax Programs...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-20
... Shrimp from the Socialist Republic of Vietnam: Extension of Final Results of Antidumping Duty New Shipper... Vietnam (``Vietnam''). This review covers the period February 1, 2008 through January 31, 2009. EFFECTIVE... preliminary intent to rescind the new shipper review in the antidumping duty order on shrimp from Vietnam for...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-18
... Shrimp from the Socialist Republic of Vietnam: Extension of Final Results of Antidumping Duty New Shipper... Vietnam (``Vietnam''). This review covers the period February 1, 2008 through January 31, 2009. EFFECTIVE... preliminary intent to rescind the new shipper review in the antidumping duty order on shrimp from Vietnam for...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-19
... Meat From the People's Republic of China: Extension of the Final Results of Antidumping Duty... reviews of the antidumping duty order on freshwater crawfish tail meat from the People's Republic of China. See Freshwater Crawfish Tail Meat From the People's Republic of China: Preliminary Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-19
...-Alloy Steel Pipe From Mexico: Final Results of Antidumping Duty Administrative Review and Rescission of...- alloy steel pipe from Mexico. See Certain Circular Welded Non-Alloy Steel Pipe From Mexico; Preliminary... remaining three respondents. See Certain Circular Welded Non-Alloy Steel Pipe from Mexico: Notice of Partial...
-
NASA Technical Reports Server (NTRS)
Clausen, O. W.
1976-01-01
Systems design for an initial atmospheric cloud physics laboratory to study microphysical processes in zero gravity is presented. Included are descriptions of the fluid, thermal, mechanical, control and data, and electrical distribution interfaces with Spacelab. Schedule and cost analysis are discussed.
-
2005-08-01
proceeds through a prothrombinase complex (prothrombin, factor Va, calcium, and phospholipid). Thrombin is the final product in the coagulation cascade...we report preliminary data on the efficacy of mixtures of highly purified blood coagulation factors (FVIIa and FXa) and phospholipids vesicles (PCPS...testing. Further study of these drugs for the use of traumatic hemorrhage is not warranted. 15. SUBJECT TERMS Recombinant Factor VI~a, factor Xa
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1978-12-04
The following appendices are included; Dynamic Simulation Program (ODSP-3); sample results of dynamic simulation; trip report - NH/sub 3/ safety precautions/accident records; trip report - US Coast Guard Headquarters; OTEC power system development, preliminary design test program report; medium turbine generator inspection point program; net energy analysis; bus bar cost of electricity; OTEC technical specifications; and engineer drawings. (WHK)
-
ERIC Educational Resources Information Center
California Univ., Los Angeles. Inst. of Library Research.
This document presents preliminary specifications for a library-based Center for Information Services (CIS). Four sets of issues are covered: (1) data base inventory, providing a listing of magnetic tape data bases now available from national sources or soon to be so; (2) administrative issues, including the organization of the CIS within the…
-
7 CFR 1767.18 - Assets and other debits.
Code of Federal Regulations, 2012 CFR
2012-01-01
... Regulatory Study Costs 182.3Other Regulatory Assets 183Preliminary Survey and Investigation Charges... an experimental status. B. Amounts in this account shall be transferred to Account 101, Electric... considered as experimental. C. The depreciation on property in this account shall be charged to Account 403.8...
-
7 CFR 1767.18 - Assets and other debits.
Code of Federal Regulations, 2011 CFR
2011-01-01
... Regulatory Study Costs 182.3Other Regulatory Assets 183Preliminary Survey and Investigation Charges... an experimental status. B. Amounts in this account shall be transferred to Account 101, Electric... considered as experimental. C. The depreciation on property in this account shall be charged to Account 403.8...
-
7 CFR 1767.18 - Assets and other debits.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Regulatory Study Costs 182.3Other Regulatory Assets 183Preliminary Survey and Investigation Charges... an experimental status. B. Amounts in this account shall be transferred to Account 101, Electric... considered as experimental. C. The depreciation on property in this account shall be charged to Account 403.8...
-
NASA Technical Reports Server (NTRS)
Wood, R. M.; Miller, D. S.; Brentner, K. S.
1983-01-01
A theoretical and experimental investigation has been conducted to evaluate the fundamental supersonic aerodynamic characteristics of a generic twin-body model at a Mach number of 2.70. Results show that existing aerodynamic prediction methods are adequate for making preliminary aerodynamic estimates.
-
Vorob'ev, E I; Gazenko, O G; Gurovskiĭ, N N; Nefedov, Iu G; Egorov, B B
1976-01-01
The paper presents brief information on the Apollo-Soyuz test mission, its program biomedical investigations to be carried out in flight and specific medical aspects. It discusses the main tasks of the joint US-USSR experiments and Soviet experiments. It gives and analyzes preliminary results of medical monitoring and postflight examinations of the crew members.
-
Chemical Analysis of the Moon at the Surveyor VI Landing Site: Preliminary Results.
Turkevich, A L; Patterson, J H; Franzgrote, E J
1968-06-07
The alpha-scattering experiment aboard soft-landing Surveyor VI has provided a chemical analysis of the surface of the moon in Sinus Medii. The preliminary results indicate that, within experimental errors, the composition is the same as that found by Surveyor V in Mare Tranquillitatis. This finding suggests that large portions of the lunar maria resemble basalt in composition.
-
ERIC Educational Resources Information Center
Donohoe, Claire; Topping, Keith; Hannah, Elizabeth
2012-01-01
This preliminary study investigated the impact of the online interactive programme Brainology (which aimed to encourage a growth mindset) on the mindset, resiliency and sense of mastery of secondary school pupils. A quasi-experimental pre-, post- and follow-up mixed-methods study was carried out with 33 participants aged 13-14 years. The measures…
-
Preliminary results of the large experimental wind turbine phase of the national wind energy program
NASA Technical Reports Server (NTRS)
Thomas, R. L.; Sholes, J. E.
1975-01-01
A major phase of the wind energy program is the development of reliable wind turbines for supplying cost-competitive electrical energy. This paper discusses the preliminary results of two projects in this phase of the program. First an experimental 100 kW wind turbine design and its status are reviewed. Also discussed are the results of two parallel design studies for determining the configurations and power levels for wind turbines with minimum energy costs. These studies show wind energy costs of 7 to 1.5 c/kWH for wind turbines produced in quantities of 100 to 1000 a year and located at sites having average winds of 12 to 18 mph.
-
Preliminary experimental results from a MARS Micro-CT system.
He, Peng; Yu, Hengyong; Thayer, Patrick; Jin, Xin; Xu, Qiong; Bennett, James; Tappenden, Rachael; Wei, Biao; Goldstein, Aaron; Renaud, Peter; Butler, Anthony; Butler, Phillip; Wang, Ge
2012-01-01
The Medipix All Resolution System (MARS) system is a commercial spectral/multi-energy micro-CT scanner designed and assembled by the MARS Bioimaging, Ltd. in New Zealand. This system utilizes the state-of-the-art Medipix photon-counting, energy-discriminating detector technology developed by a collaboration at European Organization for Nuclear Research (CERN). In this paper, we report our preliminary experimental results using this system, including geometrical alignment, photon energy characterization, protocol optimization, and spectral image reconstruction. We produced our scan datasets with a multi-material phantom, and then applied ordered subset-simultaneous algebraic reconstruction technique (OS-SART) to reconstruct images in different energy ranges and principal component analysis (PCA) to evaluate spectral deviation among the energy ranges.
-
NASA Technical Reports Server (NTRS)
1975-01-01
Results of tests conducted on preliminary design polymeric-composite fan blade for the under the wing (UTW) OCSEE engine are presented. During this phase of the program a total of 17preliminary OCSEE UTW composite fan blades were manufactured for various component tests including frequency characteristics, strain distribution, bench fatigue, dovetail pull, whirligig overspeed and whirligig impact. All tests were successfully completed with the exception of whirligig impact tests. Improvements in local impact capability are being evaluated for the OCSEE blade under other NASA and related programs.
-
Quiet Clean Short-Haul Experimental Engine (QSCEE). Preliminary analyses and design report, volume 1
NASA Technical Reports Server (NTRS)
1974-01-01
The experimental propulsion systems to be built and tested in the 'quiet, clean, short-haul experimental engine' program are presented. The flight propulsion systems are also presented. The following areas are discussed: acoustic design; emissions control; engine cycle and performance; fan aerodynamic design; variable-pitch actuation systems; fan rotor mechanical design; fan frame mechanical design; and reduction gear design.
-
Quantum-Enhanced Cyber Security: Experimental Computation on Quantum-Encrypted Data
2017-03-02
AFRL-AFOSR-UK-TR-2017-0020 Quantum-Enhanced Cyber Security: Experimental Computation on Quantum-Encrypted Data Philip Walther UNIVERSITT WIEN Final...REPORT TYPE Final 3. DATES COVERED (From - To) 15 Oct 2015 to 31 Dec 2016 4. TITLE AND SUBTITLE Quantum-Enhanced Cyber Security: Experimental Computation...FORM SF 298 Final Report for FA9550-1-6-1-0004 Quantum-enhanced cyber security: Experimental quantum computation with quantum-encrypted data
-
Automatic picker of P & S first arrivals and robust event locator
NASA Astrophysics Data System (ADS)
Pinsky, V.; Polozov, A.; Hofstetter, A.
2003-12-01
We report on further development of automatic all distances location procedure designed for a regional network. The procedure generalizes the previous "loca l" (R < 500 km) and "regional" (500 < R < 2000 km) routines and comprises: a) preliminary data processing (filtering and de-spiking), b) phase identificatio n, c) P, S first arrival picking, d) preliminary location and e) robust grid-search optimization procedure. Innovations concern phase identification, automa tic picking and teleseismic location. A platform free flexible Java interface was recently created, allowing easy parameter tuning and on/off switching to t he full-scale manual picking mode. Identification of the regional P and S phase is provided by choosing between the two largest peaks in the envelope curve. For automatic on-time estimation we utilize now ratio of two STAs, calculated in two consecutive and equal time windows (instead of previously used Akike Information Criterion). "Teleseismic " location is split in two stages: preliminary and final one. The preliminary part estimates azimuth and apparent velocity by fitting a plane wave to the P automatic pickings. The apparent velocity criterion is used to decide about strategy of the following computations: teleseismic or regional. The preliminary estimates of azimuth and apparent velocity provide starting value for the final teleseismic and regional location. Apparent velocity is used to get first a pproximation distance to the source on the basis of the P, Pn, Pg travel-timetables. The distance estimate together with the preliminary azimuth estimate provides first approximations of the source latitude and longitude via sine and cosine theorems formulated for the spherical triangle. Final location is based on robust grid-search optimization procedure, weighting the number of pickings that simultaneously fit the model travel times. The grid covers initial location and becomes finer while approaching true hypocenter. The target function is a sum of the bell-shaped characteristic functions, used to emphasize true pickings and eliminate outliers. The final solution is a grid point that provides maximum to the target function. The procedure was applied to a list of ML > 4 earthquakes recorded by the Israel Seismic Network (ISN) in the 1999-2002 time period. Most of them are badly constrained relative the network. However, the results of location with average normalized error relative bulletin solutions e=dr/R of 5% were obtained, in each of the distance ranges. The first version of the procedure was incorporated in the national Early Warning System in 2001. Recently, we started to send automatic Early Warn ing reports, to the EMSC Real Time Bulletin. Initially reported some teleseismic location discrepancies have been eliminated by introduction of station corrections.
-
ERIC Educational Resources Information Center
Choukas-Bradley, Sophia; Giletta, Matteo; Widman, Laura; Cohen, Geoffrey L.; Prinstein, Mitchell J.
2014-01-01
A performance-based measure of peer influence susceptibility was examined as a moderator of the longitudinal association between peer norms and trajectories of adolescents' number of sexual intercourse partners. Seventy-one 9th grade adolescents (52% female) participated in an experimental "chat room" paradigm involving…
-
Developmental efforts and experimental data are described that focused on quantifying the transfer of particles on a mass basis from indoor surfaces to human skin. Methods were developed that utilized a common fluorescein-tagged Arizona Test Dust (ATD) as a possible surrogate ...
-
NASA Technical Reports Server (NTRS)
Oleson, Steven R.
2018-01-01
The COncurrent Multidisciplinary Preliminary Assessment of Space Systems (COMPASS) Team partnered with the Applied Research Laboratory to perform a NASA Innovative Advanced Concepts (NIAC) Program study to evaluate chemical based power systems for keeping a Venus lander alive (power and cooling) and functional for a period of days. The mission class targeted was either a Discovery ($500M) or New Frontiers ($750M to $780M) class mission.
-
45 CFR 154.230 - Submission and posting of Final Justifications for unreasonable rate increases.
Code of Federal Regulations, 2011 CFR
2011-10-01
... information available to the public on its Web site for at least three years. (d) CMS will post all Final Justifications on the CMS Web site. This information will remain available to the public on the CMS Web site for... submitted in the Preliminary Justification supporting the rate increase; and (2) Prominently post on its Web...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-24
... duty order on polyvinyl alcohol (PVA) from Taiwan. For these final results, we continue to find that... Department published the preliminary results of the administrative review of the antidumping duty order on... review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act). Scope of the Order...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-04
...: Certain Lined Paper Products From the People's Republic of China, 71 FR 53079 (September 8, 2006) (``Lined Paper from the PRC''); see also Final Determination of Sales at Less Than Fair Value and Final Partial... Administrative Review: Petroleum Wax Candles From the People's Republic of China, 72 FR 52355, 52356 (September...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-01
... successor-in-interest to the pre-acquisition myonic GmbH. Finally, we are announcing our revocation of the..., 2009. We invited interested parties to comment on the Preliminary Results. We received case and... determined that myonic GmbH is the successor-in-interest to the pre-acquisition myonic GmbH and invited...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-31
... Pipe and Tube Products From Turkey: Final Results of Antidumping Duty Administrative Review; 2011-2012... pipe and tube products (welded pipe and tube) from Turkey.\\1\\ The period of review (POR) is May 1, 2011... during the POR.\\2\\ \\1\\ See Welded Carbon Steel Standard Pipe and Tube Products from Turkey: Preliminary...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-17
...Pursuant to the Council on Environmental Quality Regulations (40 CFR part 1500-08) implementing procedural provisions of the National Environmental Policy Act (NEPA), the Department of Labor, Office of the Secretary (OSEC), in accordance with 29 CFR 11.11(d), gives final notice of the proposed construction of a small vertical axis wind turbine and solar cells at the Paul Simon Job Corps Center, and that this project will not have a significant adverse impact on the environment. In accordance with 29 CFR 11.11(d) and 40 CFR 1501.4(e)(2), a preliminary Environmental Assessment was presented through a public meeting held on 5/4/2010 at the Paul Simon Job Corps Center. No comments were received regarding the Environmental Assessment (EA). OSEC has reviewed the conclusion of the EA, and agrees with the finding of no significant impact. This notice serves as the Final Finding of No Significant Impact (FONSI) for Small Vertical Wind Turbine and Solar Installation at the Paul Simon Job Corps Center located at 3348 South Kedzie Avenue, Chicago, IL 60623. The preliminary EA are adopted in final with no change.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Weber, E.R.
1983-09-01
The solar central receiver technology, site, and specific unit for repowering were selected in prior analyses and studies. The objectives of this preliminary design study were to: develop a solar central receiver repowering design for Saguaro that (1) has potential to be economically competitive with fossil fueled plants in near and long term applications, (2) has the greatest chance for completion without further government funding, (3) will further define technical and economic feasibility of a 66 MWe gross size plant that is adequate to meet the requirements for utility and industrial process heat applications, (4) can potentially be constructed andmore » operated within the next five years, and (5) incorporates solar central receiver technology and represents state-of-the-art development. This volume on the preliminary design includes the following sections: executive summary; introduction; changes from advanced conceptual design; preliminary design; system characteristics; economic analysis; and development plan.« less
-
Exclusive B Decays to Charmonium Final States
DOE Office of Scientific and Technical Information (OSTI.GOV)
Barrera, Barbara
We report on exclusive decays of B mesons into final states containing charmonium using data collected with the BABAR detector at the PEP-II storage rings. The charmonium states considered here are J/{psi}, {psi}(2S), and {chi}{sub c1}. Branching fractions for several exclusive final states, a measurement of the decay amplitudes for the B{sup 0} {yields} J/{psi} K* decay, and measurements of the B{sup 0} and B{sup +} masses are presented. All of the results we present here are preliminary.
-
15 CFR 923.94 - Application for program development or implementation grants.
Code of Federal Regulations, 2010 CFR
2010-01-01
... AND COASTAL RESOURCE MANAGEMENT COASTAL ZONE MANAGEMENT PROGRAM REGULATIONS Applications for Program...) The cumulative progress toward meeting the requirements for preliminary or final approval of a coastal...
-
15 CFR 923.94 - Application for program development or implementation grants.
Code of Federal Regulations, 2011 CFR
2011-01-01
... AND COASTAL RESOURCE MANAGEMENT COASTAL ZONE MANAGEMENT PROGRAM REGULATIONS Applications for Program...) The cumulative progress toward meeting the requirements for preliminary or final approval of a coastal...
-
2017-04-13
experimental and engineering expertise...ex situ, and preliminary in situ, experimental program utilizing optical microscopy, scanning electron...modeling, as well as through working with NAVAIR for guidance on several topics including experimental
-
VICTORIA Class Submarine Human-in-the-Loop Experimentation Plan
2014-06-01
1472G. VICTORIA Class Submarine Human-in-the-Loop Experimentation Plan and Preliminary Results © Her Majesty the Queen in Right of...19 th International Command and Control Research and Technology Symposium Title: VICTORIA Class Submarine Human-in-the-Loop...TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE VICTORIA Class Submarine Human-in-the-Loop Experimentation Plan 5a. CONTRACT
-
32 CFR 651.51 - The final phase.
Code of Federal Regulations, 2014 CFR
2014-07-01
..., cannot or will not proceed unless other actions are previously or simultaneously taken, are... indicated in the preliminary phase. (2) Prescribe overall page limits for the EIS in accordance with the CEQ...
-
32 CFR 651.51 - The final phase.
Code of Federal Regulations, 2011 CFR
2011-07-01
..., cannot or will not proceed unless other actions are previously or simultaneously taken, are... indicated in the preliminary phase. (2) Prescribe overall page limits for the EIS in accordance with the CEQ...
-
Crowdsourcing: A Primer and Its implications for Systems Engineering
2012-08-01
detailing areas to be improved within current crowdsourcing frameworks. Finally, an agent-based simulation using machine learning techniques is defined, preliminary results are presented, and future research directions are described.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Snowden-Swan, Lesley J.; Zhu, Yunhua; Jones, Susanne B.
A preliminary process model and techno-economic analysis (TEA) was completed for fuel produced from hydrothermal liquefaction (HTL) of sludge waste from a municipal wastewater treatment plant (WWTP) and subsequent biocrude upgrading. The model is adapted from previous work by Jones et al. (2014) for algae HTL, using experimental data generated in fiscal year 2015 (FY15) bench-scale HTL testing of sludge waste streams. Testing was performed on sludge samples received from MetroVancouver’s Annacis Island WWTP (Vancouver, B.C.) as part of a collaborative project with the Water Environment and Reuse Foundation (WERF). The full set of sludge HTL testing data from thismore » effort will be documented in a separate report to be issued by WERF. This analysis is based on limited testing data and therefore should be considered preliminary. Future refinements are necessary to improve the robustness of the model, including a cross-check of modeled biocrude components with the experimental GCMS data and investigation of equipment costs most appropriate at the smaller scales used here. Environmental sustainability metrics analysis is also needed to understand the broader impact of this technology pathway. The base case scenario for the analysis consists of 10 HTL plants, each processing 100 dry U.S. ton/day (92.4 ton/day on a dry, ash-free basis) of sludge waste and producing 234 barrel per stream day (BPSD) biocrude, feeding into a centralized biocrude upgrading facility that produces 2,020 barrel per standard day of final fuel. This scale was chosen based upon initial wastewater treatment plant data collected by the resource assessment team from the EPA’s Clean Watersheds Needs Survey database (EPA 2015a) and a rough estimate of what the potential sludge availability might be within a 100-mile radius. In addition, we received valuable feedback from the wastewater treatment industry as part of the WERF collaboration that helped form the basis for the selected HTL and upgrading plant scales and feedstock credit (current cost of disposal). It is assumed that the sludge is currently disposed of at $16.20/wet ton ($46/dry ton at 35% solids; $50/ton dry, ash-free basis) and this is included as a feedstock credit in the operating costs. The base case assumptions result in a minimum biocrude selling price of $3.8/gge and a minimum final upgraded fuel selling price of $4.9/gge. Several areas of process improvement and refinements to the analysis have the potential to significantly improve economics relative to the base case: • Optimization of HTL sludge feed solids content • Optimization of HTL biocrude yield • Optimization of HTL reactor liquid hourly space velocity (LHSV) • Optimization of fuel yield from hydrotreating • Combined large and small HTL scales specific to regions (e.g., metropolitan and suburban plants) Combined improvements believed to be achievable in these areas can potentially reduce the minimum selling price of biocrude and final upgraded fuel by about 50%. Further improvements may be possible through recovery of higher value components from the HTL aqueous phase, as being investigated under separate PNNL projects. Upgrading the biocrude at an existing petroleum refinery could also reduce the MFSP, although this option requires further testing to ensure compatibility and mitigate risks to a refinery. And finally, recycling the HTL aqueous phase product stream back to the headworks of the WWTP (with no catalytic hydrothermal gasification treatment) can significantly reduce cost. This option is uniquely appropriate for application at a water treatment facility but also requires further investigation to determine any technical and economic challenges related to the extra chemical oxygen demand (COD) associated with the recycled water.« less
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Snowden-Swan, Lesley J.; Zhu, Yunhua; Jones, Susanne B.
A preliminary process model and techno-economic analysis (TEA) was completed for fuel produced from hydrothermal liquefaction (HTL) of sludge waste from a municipal wastewater treatment plant (WWTP) and subsequent biocrude upgrading. The model is adapted from previous work by Jones et al. (2014) for algae HTL, using experimental data generated in fiscal year 2015 (FY15) bench-scale HTL testing of sludge waste streams. Testing was performed on sludge samples received from Metro Vancouver’s Annacis Island WWTP (Vancouver, B.C.) as part of a collaborative project with the Water Environment and Reuse Foundation (WERF). The full set of sludge HTL testing data frommore » this effort will be documented in a separate report to be issued by WERF. This analysis is based on limited testing data and therefore should be considered preliminary. In addition, the testing was conducted with the goal of successful operation, and therefore does not represent an optimized process. Future refinements are necessary to improve the robustness of the model, including a cross-check of modeled biocrude components with the experimental GCMS data and investigation of equipment costs most appropriate at the relatively small scales used here. Environmental sustainability metrics analysis is also needed to understand the broader impact of this technology pathway. The base case scenario for the analysis consists of 10 HTL plants, each processing 100 dry U.S. ton/day (92.4 ton/day on a dry, ash-free basis) of sludge waste and producing 234 barrel per stream day (BPSD) biocrude, feeding into a centralized biocrude upgrading facility that produces 2,020 barrel per standard day of final fuel. This scale was chosen based upon initial wastewater treatment plant data collected by PNNL’s resource assessment team from the EPA’s Clean Watersheds Needs Survey database (EPA 2015a) and a rough estimate of what the potential sludge availability might be within a 100-mile radius. In addition, we received valuable feedback from the wastewater treatment industry as part of the WERF collaboration that helped form the basis for the selected HTL and upgrading plant scales and feedstock credit (current cost of disposal). It is assumed that the sludge is currently disposed of at $16.20/wet ton ($46/dry ton at 35% solids; $50/ton dry, ash-free basis) and this is included as a feedstock credit in the operating costs. The base case assumptions result in a minimum biocrude selling price of $3.8/gge and a minimum final upgraded fuel selling price of $4.9/gge. Several areas of process improvement and refinements to the analysis have the potential to significantly improve economics relative to the base case: •Optimization of HTL sludge feed solids content •Optimization of HTL biocrude yield •Optimization of HTL reactor liquid hourly space velocity (LHSV) •Optimization of fuel yield from hydrotreating •Combined large and small HTL scales specific to regions (e.g., metropolitan and suburban plants) Combined improvements believed to be achievable in these areas can potentially reduce the minimum selling price of biocrude and final upgraded fuel by about 50%. Further improvements may be possible through recovery of higher value components from the HTL aqueous phase, as being investigated under separate PNNL projects. Upgrading the biocrude at an existing petroleum refinery could also reduce the MFSP, although this option requires further testing to ensure compatibility and mitigation of risks to a refinery. And finally, recycling the HTL aqueous phase product stream back to the headworks of the WWTP (with no catalytic hydrothermal gasification treatment) can significantly reduce cost. This option is uniquely appropriate for application at a water treatment facility but also requires further investigation to determine any technical and economic challenges related to the extra chemical oxygen demand (COD) associated with the recycled water.« less
-
SCALE UP OF CERAMIC WASTE FORMS FOR THE EBR-II SPENT FUEL TREATMENT PROCESS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Matthew C. Morrison; Kenneth J. Bateman; Michael F. Simpson
2010-11-01
ABSTRACT SCALE UP OF CERAMIC WASTE FORMS FOR THE EBR-II SPENT FUEL TREATMENT PROCESS Matthew C. Morrison, Kenneth J. Bateman, Michael F. Simpson Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415 The ceramic waste process is the intended method for disposing of waste salt electrolyte, which contains fission products from the fuel-processing electrorefiners (ER) at the INL. When mixed and processed with other materials, the waste salt can be stored in a durable ceramic waste form (CWF). The development of the CWF has recently progressed from small-scale testing and characterization to full-scale implementation and experimentation using surrogate materialsmore » in lieu of the ER electrolyte. Two full-scale (378 kg and 383 kg) CWF test runs have been successfully completed with final densities of 2.2 g/cm3 and 2.1 g/cm3, respectively. The purpose of the first CWF was to establish material preparation parameters. The emphasis of the second pre-qualification test run was to evaluate a preliminary multi-section CWF container design. Other considerations were to finalize material preparation parameters, measure the material height as it consolidates in the furnace, and identify when cracking occurs during the CWF cooldown process.« less
-
Examining the Function of Problem Behavior in Fragile X Syndrome: Preliminary Experimental Analysis
ERIC Educational Resources Information Center
Langthorne, Paul; McGill, Peter; O'Reilly, Mark F.; Lang, Russell; Machalicek, Wendy; Chan, Jeffrey Michael; Rispoli, Mandy
2011-01-01
Fragile X syndrome is the most common inherited cause of intellectual and developmental disability. The influence of environmental variables on behaviors associated with the syndrome has received only scant attention. The current study explored the function served by problem behavior in fragile X syndrome by using experimental functional analysis…
-
The fluid mechanics of channel fracturing flows: experiment
NASA Astrophysics Data System (ADS)
Rashedi, Ahmadreza; Tucker, Zachery; Ovarlez, Guillaume; Hormozi, Sarah
2017-11-01
We show our preliminary experimental results on the role of fluid mechanics in channel fracturing flows, particularly yield stress fracturing fluids. Recent trends in the oil industry have included the use of cyclic pumping of a proppant slurry interspersed with a yield stress fracturing fluid, which is found to increase wells productivity, if particles disperse in a certain fashion. Our experimental study aims to investigate the physical mechanisms responsible for dispersing the particles (proppant) within a yield stress carrier fluid, and to measure the dispersion of proppant slugs in various fracturing regimes. To this end we have designed and built a unique experimental setup that resembles a fracture configuration coupled with a particle image/tracking velocimetry setup operating at micro to macro dimensions. Moreover, we have designed optically engineered suspensions of complex fluids with tunable yield stress and consistency, well controlled density match-mismatch properties and refractive indices for both X-rays and visible lights. We present our experimental system and preliminary results. NSF (Grant No. CBET-1554044- CAREER), ACS PRF (Grant No. 55661-DNI9).
-
Preliminary Experimental Investigation of Quasi Achromat scheme at Advanced Photon Source
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sun, Yipeng; Shang, Hairong
Next generation storage rings require weaker dipolemagnets and stronger quadrupole focusing to achieve very low emittance. To suppress the geometric and chromatic optics aberrations introduced by the strong sextupoles, achromat and quasi achromat schemes are applied in the lattice design to improve the beam dynamics performance. In this paper, some preliminary experimental investigation of the quasi achromat scheme at the Advanced Photon Source (APS) are presented. Three different operation lattices are compared on their beam dynamics performance. Although none of these operation lattices achieve ideal quasi achromat condition, they have certain relevant features. It is observed that fewer resonances aremore » present in the nominal operation lattice which is most close to quasi achromat required conditions.« less
-
Velocity Measurements in Nasal Cavities by Means of Stereoscopic Piv - Preliminary Tests
NASA Astrophysics Data System (ADS)
Cozzi, Fabio; Felisati, Giovanni; Quadrio, Maurizio
2017-08-01
The prediction of detailed flow patterns in human nasal cavities using computational fluid dynamics (CFD) can provide essential information on the potential relationship between patient-specific geometrical characteristics of the nasal anatomy and health problems, and ultimately led to improved surgery. The complex flow structure and the intricate geometry of the nasal cavities make achieving such goals a challenge for CFD specialists. The need for experimental data to validate and improve the numerical simulations is particularly crucial. To this aim an experimental set-up based on Stereo PIV and a silicon phantom of nasal cavities have been designed and realized at Politecnico di Milano. This work describes the main features and challenges of the set-up along with some preliminary results.
-
ERIC Educational Resources Information Center
Sullivan, Sharon G.; Barr, Catherine; Grabois, Andrew
2002-01-01
Includes six articles that report on prices of U.S. and foreign published materials; book title output and average prices; book sales statistics; book exports and imports; book outlets in the U.S. and Canada; and review media statistics. (LRW)
-
Systems engineering and the user: Incorporation of user requirements into the SE process
NASA Technical Reports Server (NTRS)
Naugle, John E.
1993-01-01
This paper is organized into four parts. In the Gestation Phase, I describe the process of starting a new mission and establishing its rough boundaries. Next I show how the scientific experiments are selected. Then we enter the Preliminary Design Phase, where we incorporate the scientist's instruments into the systems engineering process. Finally, I show how the Preliminary Design Review (PDR) assures NASA management and the scientists that the scientific requirements have been incorporated into the systems engineering process to everyone's satisfaction.
-
Full-aperture x-ray tests of Kirkpatrick-Baez modules: preliminary results
NASA Astrophysics Data System (ADS)
Pina, L.; Marsikova, V.; Hudec, R.; Inneman, A.; Marsik, J.; Cash, W.; Shipley, A.; Zeiger, B.
2011-05-01
We report on preliminary results of full aperture X-ray optical tests at the X-ray test facility at the University of Colorado (USA) of four test modules of Kirkpatrick-Baez (KB) X-ray optical systems performed in August 2010. Direct experimental comparisons were made between gold-coated optics of two novel substrates: glass foils and silicon wafers. The preliminary results are promising, with full-width half-maxima of full stacks being of order of 30 arcsec in 2D full arrangement. These results justify further efforts to improve KB optics for use in low-cost, high-performance space-borne astronomical imaging instruments for X-ray wavelengths.
-
Long range radio tracking of sea turtles and polar bear: Instrumentation and preliminary results
NASA Technical Reports Server (NTRS)
Baldwin, H. A.
1972-01-01
Instrumentation developed for studies of path behavior of the green sea turtle and migration movement of polar bear is described. Preliminary results bearing on navigation ability in these species are presented. Both species operate in difficult environments, and the problems faced in the design of electronic instrumentation for these studies are not completely specified at this time. However, the critical factors yet to be understood are primarily related to the behavior of instrumented animals. The data obtained with these experimental techniques are included, first to illustrate the technique and, second to provide initial preliminary results bearing on animal navigation.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-08
...The Department of Commerce is conducting an administrative review of the countervailing duty order on citric acid and certain citrate salts from the People's Republic of China for the period September 19, 2008, through December 31, 2009. We preliminarily find that RZBC Co., Ltd. (``RZBC Co.''); RZBC Import & Export Co., Ltd. (``RZBC I&E''); RZBC (Juxian) Co., Ltd. (``RZBC Juxian''); and RZBC Group Co., Ltd. (``RZBC Group'') (collectively, ``RZBC''), and Yixing Union Biochemical Co., Ltd. (``Yixing Union Co.) and Yixing Union Cogeneration Co., Ltd. (``Cogeneration'') (collectively, ``Yixing Union'') received countervailable subsidies during the period of review. If these preliminary results are adopted in our final results of this review, we will instruct U.S. Customs and Border Protection to assess countervailing duties as detailed in the ``Preliminary Results of Review'' section of this notice. Interested parties are invited to comment on these preliminary results.
-
Study on the Preliminary Design of ARGO-M Operation System
NASA Astrophysics Data System (ADS)
Seo, Yoon-Kyung; Lim, Hyung-Chul; Rew, Dong-Young; Jo, Jung Hyun; Park, Jong-Uk; Park, Eun-Seo; Park, Jang-Hyun
2010-12-01
Korea Astronomy and Space Science Institute has been developing one mobile satellite laser ranging system named as accurate ranging system for geodetic observation-mobile (ARGO-M). Preliminary design of ARGO-M operation system (AOS) which is one of the ARGO-M subsystems was completed in 2009. Preliminary design results are applied to the following development phase by performing detailed design with analysis of pre-defined requirements and analysis of the derived specifications. This paper addresses the preliminary design of the whole AOS. The design results in operation and control part which is a key part in the operation system are described in detail. Analysis results of the interface between operation-supporting hardware and the control computer are summarized, which is necessary in defining the requirements for the operation-supporting hardware. Results of this study are expected to be used in the critical design phase to finalize the design process.
-
Multidisciplinary accident investigation : volume 2
DOT National Transportation Integrated Search
1976-05-01
The Task II final report for 1974 of the Multidisciplinary Accident Investigation : Team of the Maryland Medical-Legal Foundation, Inc. is presented. This report describes some preliminary findings emanating from a series of comprehensive, multivaria...
-
19 CFR 207.20 - Investigative activity following preliminary determination.
Code of Federal Regulations, 2010 CFR
2010-04-01
...) of the Act. (b) The Director shall circulate draft questionnaires for the final phase of an investigation to parties to the investigation for comment. Any party desiring to comment on draft questionnaires...
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The Environmental Engineering Committee conducted a preliminary review of the above document in March 1986, and identified obvious errors or omissions which are explained in detail in its initial report. The Office of Solid Waste asked the Committee to review the final draft ACL guidance when it was ready for publications in the Federal Register. This report represents the Committee's review of the final draft which was found to be well-written and technically sound.
-
Fort Benning Land-Use Planning and Management Study
1990-04-01
process is three-tiered: (a) an initial phase that results in preliminary allocations for natural resources, (b) a second phase that focuses on...allocations of military training requirements, and (c) a final phase that resolves conflicts between the military and natural resource requirements and...assigns final allocations. 34. Initial phase : Natural resource allocations. The first step in this phase was to make allocations among natural resource
-
Influence de la pression de mise en forme sur le detourage de stratifies carbone/epoxy
NASA Astrophysics Data System (ADS)
Coulon, Pierre
The need to reduce the weight of structures has led to an increasing use of composite materials in the aerospace industry. To meet the required tolerances and quality, the manufacturing processes must adapt to these new materials. The machining is one of these processes that need to be optimized to control the final part quality. This experimental study aims at understanding the relationship between manufacturing parameters of quasi-isotropic carbon fibre laminates and their machinability. After a preliminary study, it was concluded that curing pressure in autoclave was the most influential manufacturing parameter. The pressure is linked, experimentally, to the void content and then to the mechanical properties and finally to the cutting forces. The research methodology is based on a classic multifactorial design of experience in which the input factors are the curing pressure, feed rate and cutting speed. This study confirms the correlation existing between the curing pressure and void content as well as the relationship between the curing pressure and mechanical properties. The new element of this study is the correlation between the curing pressure and cutting forces during trimming. This last point is interesting because it leads to the development of a predictive model for cutting forces. Although the results of this study are hardly generalizable to other materials, the prediction of cutting forces is possible. Quality after machining is also studied through two criteria: the roughness measurement and evaluation of delamination. Roughness is measured using a roughness depth measuring equipment optimized to make best use of this technique. The study confirms the patterns already observed without being able to improve the characterization of cutting quality. Keywords: composites, trimming, curing pressure, cutting forces, void content, ILSS, delamination, roughness.
-
NASA Astrophysics Data System (ADS)
Wang, Wenjia; Li, Qiang; Zeng, Shaoqun; Luo, Qingming; Li, Pengcheng
2007-02-01
Laser speckle imaging technique was used to characterize the spatiotemporal changes in cerebral blood flow (CBF) in rat cortex induced by the local ultraprofound hypothermia(0°C) with the duration time of 1 min, 2 min, 5 min, 7 min and 10 min. The experimental results showed significant difference of the spatiotemporal characteristics of changes in CBF between short term and long term of ultraprofound hypothermia. For the short duration of ultraprofound hypothermia (1 min, 2 min and 5 min), the hypothermia cause the CBF decrease firstly, and then the CBF increase rapidly when the temperature is recovered to 37°C, exceeding the baseline level and lasting 10+/-3 min, finally return to the baseline. This trend of changes in CBF is similar in the regions of artery, vein and parenchyma, but with different amplitude. For the duration time of 7 min, the changes in CBF also exhibit the similar decrease induced by ultraprofound hypothermia and the rapid increase induced by the temperature recovering, however the increase does not show the overshoot, but only reach around 75% of the baseline level. For the duration of 10 min of ultraprofound hypothermia, the CBF does not increase rapidly when the temperature is recovered to 37°C, but remains at the low level of CBF for 12+/-2 min, and then increases gradually at artery sites, or increases rapidly and then decrease slightly later at the vein and parenchyma sites. Similar as the case in the duration time of 7 min, the final CBF only recovers to about 75% of the baseline level. The experimental results suggest that the CBF can not recover to the baseline after a long duration of ultraprofound hypothermia longer than 7 min.
-
Solar thermal storage applications program
NASA Astrophysics Data System (ADS)
Peila, W. C.
1982-12-01
The efforts of the Storage Applications Program are reviewed. The program concentrated on the investigation of storage media and evaluation of storage methods. Extensive effort was given to experimental and analytical investigations of nitrate salts. Two tasks are the preliminary design of a 1200 MW/sub th/ system and the design, construction, operation, and evaluation of a subsystem research experiment, which utilized the same design. Some preliminary conclusions drawn from the subsystem research experiment are given.
-
Rusinko, A
2014-01-01
This paper addresses the issue of the ultrasound effects upon the creep deformation of metals with different levels of stacking fault energy. The influence of preliminary ultrasound irradiation time upon the steady state creep rate is considered. Synthetic theory of irrecoverable deformation is taken as a mathematical apparatus. The analytical results show good agreement with experimental data. Copyright © 2013 Elsevier B.V. All rights reserved.
-
Experimental implementation of a Pyramid WFS: Towards the first SCAO systems for E-ELT
NASA Astrophysics Data System (ADS)
Bond, C.; El Hadi, K.; Sauvage, J. F.; Correia, C.; Fauvarque, O.; Rabaud, D.; Neichel, B.; Fusco, T.
2015-12-01
Investigations into the Pyramid wavefront sensor (P-WFS) have experimentally demonstrated the ability to achieve a better performance than with a standard Shack-Hartmann sensor (SH-WFS). Implementation on the Large Binocular Telescope (LBT) provided the first operational demonstration on a facility-class instrument of a P-WFS on sky. The desire to implement a Pyramid on an Extremely Large Telescope (ELT) requires further characterisation in order to optimise the performance and match our knowledge and understanding of other wave-front sensors (WFSs). Within the framework of the European Extremely Large Telescope (E-ELT), the Laboratoire d'Astrophysique de Marseille (LAM) is involved in the preparation of the Single Conjugate Adaptive Optics (SCAO) system of HARMONI, E-ELT's 1st light integral field spectrograph (IFU). The current baseline WFS for this adaptive optics system is a Pyramid WFS using a high speed and sensitive OCAM2 camera. At LAM we are currently carrying out laboratory demonstrations of a Pyramid-WFS, with the aim to fully characterise the behaviour of the Pyramid in terms of sensitivity and linear range. This will lead to a full operational procedure for the use of the Pyramid on-sky, assisting with current designs and future implementations. The final goal is to provide an on sky comparison between the Pyramid and Shack-Hartmann at Observatoire de la Côte d'Azur (OCA). Here we present our experimental setup and preliminary results.
-
NASA Astrophysics Data System (ADS)
Oruganti, Pradeep Sharma; Krak, Michael D.; Singh, Rajendra
2018-01-01
Recently Krak and Singh (2017) proposed a scientific experiment that examined vibro-impacts in a torsional system under a step down excitation and provided preliminary measurements and limited non-linear model studies. A major goal of this article is to extend the prior work with a focus on the examination of vibro-impact phenomena observed under step responses in a torsional system with one, two or three controlled clearances. First, new measurements are made at several locations with a higher sampling frequency. Measured angular accelerations are examined in both time and time-frequency domains. Minimal order non-linear models of the experiment are successfully constructed, using piecewise linear stiffness and Coulomb friction elements; eight cases of the generic system are examined though only three are experimentally studied. Measured and predicted responses for single and dual clearance configurations exhibit double sided impacts and time varying periods suggest softening trends under the step down torque. Non-linear models are experimentally validated by comparing results with new measurements and with those previously reported. Several metrics are utilized to quantify and compare the measured and predicted responses (including peak to peak accelerations). Eigensolutions and step responses of the corresponding linearized models are utilized to better understand the nature of the non-linear dynamic system. Finally, the effect of step amplitude on the non-linear responses is examined for several configurations, and hardening trends are observed in the torsional system with three clearances.
-
Enrique, Montse; García-Montoya, Encarna; Miñarro, Montserrat; Orriols, Anna; Ticó, Joseph Ramon; Suñé-Negre, Joseph Maria; Pérez-Lozano, Pilar
2008-10-01
An experimental design has been used to develop and optimize a new high-performance liquid chromatographic (HPLC) method for the determination of Vancomycin in an extemporaneous ophthalmic solution. After the preliminary studies and literature review, the optimized method was carried out on a second generation of a C18 reverse-phase column (Luna 150 x 4.6 mm i.d., 5 microm particle size) and using methanol as organic phase, a less toxic solvent than acetonitrile, described in the extended literature. The experimental design consisted of a Placket-Burman design where six different variables were studied (flow rate, mL/min; temperature, degrees C; pH mobile phase; % buffer solution; wavelength; and injection volume) to obtain the best suitability parameters (Capacity factor-K', tailing factor, resolution, and theoretical plates). After the optimization of the chromatographic conditions and statistical treatment of the obtained results, the final method uses a mixture of a buffer solution of water-phosphoric acid (85%) (99.83:0.17, v/v) adjusted to pH 3.0 using triethylamine and mixed with methanol (87:13, v/v). The separation is achieved using a flow rate of 1.0 mL/min at 35 degrees C. The UV detector was operated at 280 nm. The validation study carried out, demonstrates the viability of the method, obtaining a good selectivity, linearity, precision, accuracy, and sensitivity.
-
NASA Astrophysics Data System (ADS)
Meng, Xuan-Yu; Li, Baoyu; Liu, Shengtang; Kang, Hongsuk; Zhao, Lin; Zhou, Ruhong
2016-02-01
As a major effective component in green tea, (-)-epigallocatechin-3-gallate (EGCG)’s potential benefits to human health have been widely investigated. Recent experimental evidences indicate that EGCG can induce the aggregation of HMGB1 protein, a late mediator of inflammation, which subsequently stimulates the autophagic degradation and thus provides protection from lethal endotoxemia and sepsis. In this study, we use molecular dynamics (MD) simulations to explore the underlying molecular mechanism of this aggregation of HMGB1 facilitated by EGCG. Our simulation results reveal that EGCG firmly binds to HMGB1 near Cys106, which supports previous preliminary experimental evidence. A large HMGB1 conformational change is observed, where Box A and Box B, two homogenous domains of HMGB1, are repositioned and packed together by EGCG. This new HMGB1 conformation has large molecular polarity and distinctive electrostatic potential surface. We suggest that the highly polarized charge distribution leads to the aggregation of HMGB1, which differs from the previous hypothesis that two HMGB1 monomers are linked by the dimer of EGCG. Possible aggregating modes have also been investigated with potential of mean force (PMF) calculations. Finally, we conclude that the conformation induced by EGCG is more aggregation-prone with higher binding free energies as compared to those without EGCG.
-
Space Weathering Experiments on Spacecraft Materials
NASA Technical Reports Server (NTRS)
Engelhart, D. P.; Cooper, R.; Cowardin, H.; Maxwell, J.; Plis, E.; Ferguson, D.; Barton, D.; Schiefer, S.; Hoffmann, R.
2017-01-01
A project to investigate space environment effects on specific materials with interest to remote sensing was initiated in 2016. The goal of the project is to better characterize changes in the optical properties of polymers found in multi-layered spacecraft insulation (MLI) induced by electron bombardment. Previous analysis shows that chemical bonds break and potentially reform when exposed to high energy electrons like those seen in orbit. These chemical changes have been shown to alter a material's optical reflectance, among other material properties. This paper presents the initial experimental results of MLI materials exposed to various fluences of high energy electrons, designed to simulate a portion of the geosynchronous Earth orbit (GEO) space environment. It is shown that the spectral reflectance of some of the tested materials changes as a function of electron dose. These results provide an experimental benchmark for analysis of aging effects on satellite systems which can be used to improve remote sensing and space situational awareness. They also provide preliminary analysis on those materials that are most likely to comprise the high area-to-mass ratio (HAMR) population of space debris in the geosynchronous orbit environment. Finally, the results presented in this paper serve as a proof of concept for simulated environmental aging of spacecraft polymers that should lead to more experiments using a larger subset of spacecraft materials.
-
Studies on adsorption of phenol from wastewater by agricultural waste.
Girish, C R; Ramachandramurty, V
2013-07-01
In this paper, preliminary investigation of various agricultural wastes-Rice mill residue (RM), Wheat mill reside (WM), Dall mill residue (DM) and the Banana peels (BM) was carried out to study their ability to be used as adsorbents for phenol-removal from wastewater. This study reports the feasibility of employing dal mill residue waste (DM) as an adsorbent for removing phenol from wastewater. The performance of DM was compared with the commercially available activated carbon (CAC). Batch mode experiments were conducted with activated DM to study the effects of initial concentration of phenol, pH and the temperature of aqueous solution on adsorption. Equilibrium adsorption isotherms and kinetics were investigated. The experimental data were analyzed by the Langmuir, Freundlich and Temkin models and the isotherm data fitted well to the Freundlich isotherm with monolayer adsorption capacity of 6.189 mg/g. The kinetic data obtained at different concentrations were analyzed using a pseudo-first order and pseudo-second- order equation. The experimental data fitted very well with the pseudo-first-order kinetic model. The FTIR analysis revealed that carboxyl and hydroxyl functional groups were mainly responsible for the sorption of phenol. Finally, the DM was found to be a promising adsorbent for phenol adsorption as compared to activated carbon.
-
Collaborative Physical Chemistry Projects Involving Computational Chemistry
NASA Astrophysics Data System (ADS)
Whisnant, David M.; Howe, Jerry J.; Lever, Lisa S.
2000-02-01
The physical chemistry classes from three colleges have collaborated on two computational chemistry projects using Quantum CAChe 3.0 and Gaussian 94W running on Pentium II PCs. Online communication by email and the World Wide Web was an important part of the collaboration. In the first project, students used molecular modeling to predict benzene derivatives that might be possible hair dyes. They used PM3 and ZINDO calculations to predict the electronic spectra of the molecules and tested the predicted spectra by comparing some with experimental measurements. They also did literature searches for real hair dyes and possible health effects. In the final phase of the project they proposed a synthetic pathway for one compound. In the second project the students were asked to predict which isomer of a small carbon cluster (C3, C4, or C5) was responsible for a series of IR lines observed in the spectrum of a carbon star. After preliminary PM3 calculations, they used ab initio calculations at the HF/6-31G(d) and MP2/6-31G(d) level to model the molecules and predict their vibrational frequencies and rotational constants. A comparison of the predictions with the experimental spectra suggested that the linear isomer of the C5 molecule was responsible for the lines.
-
Automatic Emboli Detection System for the Artificial Heart
NASA Astrophysics Data System (ADS)
Steifer, T.; Lewandowski, M.; Karwat, P.; Gawlikowski, M.
In spite of the progress in material engineering and ventricular assist devices construction, thromboembolism remains the most crucial problem in mechanical heart supporting systems. Therefore, the ability to monitor the patient's blood for clot formation should be considered an important factor in development of heart supporting systems. The well-known methods for automatic embolus detection are based on the monitoring of the ultrasound Doppler signal. A working system utilizing ultrasound Doppler is being developed for the purpose of flow estimation and emboli detection in the clinical artificial heart ReligaHeart EXT. Thesystem will be based on the existing dual channel multi-gate Doppler device with RF digital processing. A specially developed clamp-on cannula probe, equipped with 2 - 4 MHz piezoceramic transducers, enables easy system setup. We present the issuesrelated to the development of automatic emboli detection via Doppler measurements. We consider several algorithms for the flow estimation and emboli detection. We discuss their efficiency and confront them with the requirements of our experimental setup. Theoretical considerations are then met with preliminary experimental findings from a) flow studies with blood mimicking fluid and b) in-vitro flow studies with animal blood. Finally, we discuss some more methodological issues - we consider several possible approaches to the problem of verification of the accuracy of the detection system.
-
Preliminary Test Results of Heshe Hydrogeological Experimental Well Station in Taiwan
NASA Astrophysics Data System (ADS)
Chuang, P.; Liu, C.; Lin, M.; Chan, W.; Lee, T.; Chia, Y.; Teng, M.; Liu, C.
2013-12-01
Safe disposal of radioactive waste is a critical issue for the development of nuclear energy. The design of final disposal system is based on the concept of multiple barriers which integrate the natural barriers and engineering barriers for long-term isolation of radioactive wastes. As groundwater is the major medium that can transport radionuclides to our living environment, it is essential to characterize groundwater flow at the disposal site. Taiwan is located at the boundary between the Eurasian plate and the Philippine Sea plate. Geologic formations are often fractured due to tectonic compression and extension. In this study, a well station for the research and development of hydrogeological techniques was established at the Experimental Forest of the National Taiwan University in central Taiwan. There are 10 testing wells, ranging in depth from 25 m to 100 m, at the station. The bedrock beneath the regolith is highly fractured mudstone. As fracture is the preferential pathway of the groundwater flow, the focus of in-situ tests is to investigate the location of permeable fractures and the connection of permeable fractures. Several field tests have been conducted, including geophysical logging, heat-pulse flowmeter, hydraulic test, tracer test and double packer test, for the development of advanced technologies to detect the preferential groundwater flow in fractured rocks.
-
Experimental study of streaming flows associated with ultrasonic levitators
NASA Astrophysics Data System (ADS)
Trinh, E. H.; Robey, J. L.
1994-11-01
Steady-state acoustic streaming flow patterns have been observed during the operation of a variety of resonant single-axis ultrasonic levitators in a gaseous environment and in the 20-37 kHz frequency range. Light sheet illumination and scattering from smoke particles have revealed primary streaming flows which display different characteristics at low and high sound pressure levels. Secondary macroscopic streaming cells around levitated samples are superimposed on the primary streaming flow pattern generated by the standing wave. These recorded flows are quite reproducible, and are qualitatively the same for a variety of levitator physical geometries. An onset of flow instability can also be recorded in nonisothermal systems, such as levitated spot-heated samples when the resonance conditions are not exactly satisfied. A preliminary qualitative interpretation of these experimental results is presented in terms of the superposition of three discrete sets of circulation cells operating on different spatial scales. These relevant length scales are the acoustic wavelength, the levitated sample size, and finally the acoustic boundary layer thickness. This approach fails, however, to explain the streaming flow-field morphology around liquid drops levitated on Earth. Observation of the interaction between the flows cells and the levitated samples also suggests the existence of a steady-state torque induced by the streaming flows.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Loots, G G; Ovcharenko, I; Collette, N
2007-02-26
Generating the sequence of the human genome represents a colossal achievement for science and mankind. The technical use for the human genome project information holds great promise to cure disease, prevent bioterror threats, as well as to learn about human origins. Yet converting the sequence data into biological meaningful information has not been immediately obvious, and we are still in the preliminary stages of understanding how the genome is organized, what are the functional building blocks and how do these sequences mediate complex biological processes. The overarching goal of this program was to develop novel methods and high throughput strategiesmore » for determining the functions of ''anonymous'' human genes that are evolutionarily deeply conserved in other vertebrates. We coupled analytical tool development and computational predictions regarding gene function with novel high throughput experimental strategies and tested biological predictions in the laboratory. The tools required for comparative genomic data-mining are fundamentally the same whether they are applied to scientific studies of related microbes or the search for functions of novel human genes. For this reason the tools, conceptual framework and the coupled informatics-experimental biology paradigm we developed in this LDRD has many potential scientific applications relevant to LLNL multidisciplinary research in bio-defense, bioengineering, bionanosciences and microbial and environmental genomics.« less
-
2007-06-01
the CNES proposal to perform in-flight experimentation mainly on reusable thermal protections, aero-thermo-dynamics and guidance to secure the second...the vehicle. A preliminary in-flight experimentation and measurement plan has been assessed defining the main objectives in terms of reusable Thermal ...Energy Management THEFA Thermographie Face Arrière TPS Thermal Protection System VKI Von Karman Institute WRT With Respect To WTT Wind
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-28
... Countervailing Duty Orders on Certain Pasta From Italy: Affirmative Preliminary Determinations of Circumvention... Anti-Circumvention Inquiry of the Antidumping and Countervailing Duty Orders on Certain Pasta from...
-
NASA Technical Reports Server (NTRS)
Rhatigan, Jennifer L.; Christiansen, Eric L.; Fleming, Michael L.
1990-01-01
A great deal of experimentation and analysis was performed to quantify penetration thresholds of components which will experience orbital debris impacts. Penetration was found to depend upon mission specific parameters such as orbital altitude, inclination, and orientation of the component; and upon component specific parameters such as material, density and the geometry particular to its shielding. Experimental results are highly dependent upon shield configuration and cannot be extrapolated with confidence to alternate shield configurations. Also, current experimental capabilities are limited to velocities which only approach the lower limit of predicted orbital debris velocities. Therefore, prediction of the penetrating particle size for a particular component having a complex geometry remains highly uncertain. An approach is described which was developed to assess on-orbit survivability of the solar dynamic radiator due to micrometeoroid and space debris impacts. Preliminary analyses are presented to quantify the solar dynamic radiator survivability, and include the type of particle and particle population expected to defeat the radiator bumpering (i.e., penetrate a fluid flow tube). Results of preliminary hypervelocity impact testing performed on radiator panel samples (in the 6 to 7 km/sec velocity range) are also presented. Plans for further analyses and testing are discussed. These efforts are expected to lead to a radiator design which will perform to requirements over the expected lifetime.
-
NASA Technical Reports Server (NTRS)
Suemoto, S. H.; Mathias, K. E.
1974-01-01
The Bureau of Reclamation has erected at its Geothermal Resource Development site two experimental test vehicles for the purpose of desalting hot fluids of geothermal origin. Both plants have as a feed source geothermal well Mesa 6-1 drilled to a total depth of 8,030 feet and having a bottom hole temperature of 400 F. Formation fluid collected at the surface contained 24,800 mg/1 total dissolved solids. The dissolved solids consist mainly of sodium chloride. A multistage distillation (3-stage) plant has been operated intermittently for one year with no operational problems. Functioning at steady-state conditions with a liquid feed rate of 70 g/m and a temperature of 221 F, the final brine blowdown temperature was 169 F. Product water was produced at a rate of about 2 g/m; average total dissolved solids content of the product was 170 mg/1. A product quality of 27.5 mg/1 at a pH of 9.5 was produced from the first stage.
-
NASA Technical Reports Server (NTRS)
Allman, Mark; Ostermann, Shawn; Kruse, Hans
1996-01-01
In several experiments using NASA's Advanced Communications Technology Satellite (ACTS), investigators have reported disappointing throughput using the transmission control protocol/Internet protocol (TCP/IP) protocol suite over 1.536Mbit/sec (T1) satellite circuits. A detailed analysis of file transfer protocol (FTP) file transfers reveals that both the TCP window size and the TCP 'slow starter' algorithm contribute to the observed limits in throughput. In this paper we summarize the experimental and and theoretical analysis of the throughput limit imposed by TCP on the satellite circuit. We then discuss in detail the implementation of a multi-socket FTP, XFTP client and server. XFTP has been tested using the ACTS system. Finally, we discuss a preliminary set of tests on a link with non-zero bit error rates. XFTP shows promising performance under these conditions, suggesting the possibility that a multi-socket application may be less effected by bit errors than a single, large-window TCP connection.
-
Bio-inspired magnetic swimming microrobots for biomedical applications.
Peyer, Kathrin E; Zhang, Li; Nelson, Bradley J
2013-02-21
Microrobots have been proposed for future biomedical applications in which they are able to navigate in viscous fluidic environments. Nature has inspired numerous microrobotic locomotion designs, which are suitable for propulsion generation at low Reynolds numbers. This article reviews the various swimming methods with particular focus on helical propulsion inspired by E. coli bacteria. There are various magnetic actuation methods for biomimetic and non-biomimetic microrobots, such as rotating fields, oscillating fields, or field gradients. They can be categorized into force-driven or torque-driven actuation methods. Both approaches are reviewed and a previous publication has shown that torque-driven actuation scales better to the micro- and nano-scale than force-driven actuation. Finally, the implementation of swarm or multi-agent control is discussed. The use of multiple microrobots may be beneficial for in vivo as well as in vitro applications. Thus, the frequency-dependent behavior of helical microrobots is discussed and preliminary experimental results are presented showing the decoupling of an individual agent within a group of three microrobots.
-
NASA Astrophysics Data System (ADS)
Rendina, Ivo; Bellucci, Marco; Cocorullo, Giuseppe; Della Corte, Francesco G.; Iodice, Mario
2000-03-01
A new type of non-perturbing electromagnetic power sensor for microwaves and millimeter-waves, based on the thermo- optical effect in a silicon interferometric etalon cavity is presented. The incident field power is partially dissipated into the all-silicon metal-less etalon, constituting the sensing element of the detector, so causing its temperature increase. This, in turn, induces the intensity modulation of a probe laser beam reflected by the cavity after a multiple beam interference process. The sensing element is directly connected to an optical fiber for remote interrogation, so avoiding the use of perturbing coaxial cables. The performances of such a new class of non-perturbing and wideband probes, in terms of sensitivity and resolution are discussed in detail. The experimental results concerning the characterization of a preliminary prototype sensor are presented and compared with theoretical data. The dependence of the sensor response on the electromagnetic frequency and on the sensing element characteristics is finally discussed.
-
Alpha Particle Induced X-ray Emission in the Classroom
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lopez, Jorge A.; Borunda, Mario F.; Morales, Jaime
2003-08-26
We report on an experimental demonstration in an introductory modern physics course to elucidate the X-ray line spectra, and how they arise from transitions of electrons to inner shells. We seek to determine the effect of limited use of an interactive component as a supplement to a traditional lecture, and how it would improve the student achievement. In this preliminary study the students were exposed to traditional lectures on X-ray production and Bohr's model, they then were given a homework on the abc of X-ray spectra, after which they were given a pre-test on the materials, followed by an in-classmore » demonstration, and a final post-exam. The gain, as measured from pre- to post-exams appears to remark the differences in how students approached the subject before and after the use of the demonstration. This initial study shows the validity of in-class demonstrations as teaching tools and opens a wide new area of research in modern physics teaching.« less
-
Vertical electro-absorption modulator design and its integration in a VCSEL
NASA Astrophysics Data System (ADS)
Marigo-Lombart, L.; Calvez, S.; Arnoult, A.; Thienpont, H.; Almuneau, G.; Panajotov, K.
2018-04-01
Electro-absorption modulators, either embedded in CMOS technology or integrated with a semiconductor laser, are of high interest for many applications such as optical communications, signal processing and 3D imaging. Recently, the integration of a surface-normal electro-absorption modulator into a vertical-cavity surface-emitting laser has been considered. In this paper we implement a simple quantum well electro-absorption model and design and optimize an asymmetric Fabry-Pérot semiconductor modulator while considering all physical properties within figures of merit. We also extend this model to account for the impact of temperature on the different parameters involved in the calculation of the absorption, such as refractive indices and exciton transition broadening. Two types of vertical modulator structures have been fabricated and experimentally characterized by reflectivity and photocurrent measurements demonstrating a very good agreement with our model. Finally, preliminary results of an electro-absorption modulator vertically integrated with a vertical-cavity surface-emitting laser device are presented, showing good modulation performances required for high speed communications.
-
Heleno, Sandrina A; Diz, Patrícia; Prieto, M A; Barros, Lillian; Rodrigues, Alírio; Barreiro, Maria Filomena; Ferreira, Isabel C F R
2016-04-15
Ergosterol, a molecule with high commercial value, is the most abundant mycosterol in Agaricus bisporus L. To replace common conventional extraction techniques (e.g. Soxhlet), the present study reports the optimal ultrasound-assisted extraction conditions for ergosterol. After preliminary tests, the results showed that solvents, time and ultrasound power altered the extraction efficiency. Using response surface methodology, models were developed to investigate the favourable experimental conditions that maximize the extraction efficiency. All statistical criteria demonstrated the validity of the proposed models. Overall, ultrasound-assisted extraction with ethanol at 375 W during 15 min proved to be as efficient as the Soxhlet extraction, yielding 671.5 ± 0.5mg ergosterol/100 g dw. However, with n-hexane extracts with higher purity (mg ergosterol/g extract) were obtained. Finally, it was proposed for the removal of the saponification step, which simplifies the extraction process and makes it more feasible for its industrial transference. Copyright © 2015 Elsevier Ltd. All rights reserved.
-
Actively controlled shaft seals for aerospace applications
NASA Astrophysics Data System (ADS)
Salant, Richard F.
The objective of years 4 and 5 of this project (1992 and 1993) is to determine experimentally the behavior and operating characteristics of a controllable mechanical seal, and to identify potential problem areas. A controllable mechanical seal is one in which the thickness of the lubricating film separating the sealing surfaces is adjustable, and can be controlled by an electronic control system, based on information supplied by sensors that monitor the condition of the film. This work builds upon work done during years 1-3, in which a controllable mechanical seal was designed, analyzed, and fabricated. At the beginning of year 4, the mechanical seal and test rig was assembled, and preliminary testing begun. The five major tasks of years 4 and 5 encompass instrumentation, configuration changes of the mechanical seal to optimize its performance, systematic steady state tests, systematic transient tests, and a final report. During this reporting period, significant progress was made on instrumenting the test rig and modifying the design to optimize the seal's performance. Initial steady state tests were also performed.
-
1972-01-01
This is a cutaway illustration of the Neutral Buoyancy Simulator (NBS) at the Marshall Space Flight Center (MSFC ). The MSFC NBS provided an excellent environment for testing hardware to examine how it would operate in space and for evaluating techniques for space construction and spacecraft servicing. Here, engineers, designers, and astronauts performed various tests to develop basic concepts, preliminary designs, final designs, and crew procedures. The NBS was constructed of welded steel with polyester-resin coating. The water tank was 75-feet (22.9- meters) in diameter, 40-feet (12.2-meters) deep, and held 1.32 million gallons of water. Since it opened for operation in 1968, the NBS had supported a number of successful space missions, such as the Skylab, Solar Maximum Mission Satellite, Marned Maneuvering Unit, Experimental Assembly of Structures in Extravehicular Activity/Assembly Concept for Construction of Erectable Space Structures (EASE/ACCESS), the Hubble Space Telescope, and the Space Station. The function of the MSFC NBS was moved to the larger simulator at the Johnson Space Center and is no longer operational.
-
Cho, Dong-Wan; Cho, Seong-Heon; Song, Hocheol; Kwon, Eilhann E
2015-01-01
This work mainly presents the influence of CO2 as a reaction medium in the thermo-chemical process (pyrolysis) of waste biomass. Our experimental work mechanistically validated two key roles of CO2 in pyrolysis of biomass. For example, CO2 expedited the thermal cracking of volatile organic compounds (VOCs) evolved from the thermal degradation of spent coffee ground (SCG) and reacted with VOCs. This enhanced thermal cracking behavior and reaction triggered by CO2 directly led to the enhanced generation of CO (∼ 3000%) in the presence of CO2. As a result, this identified influence of CO2 also directly led to the substantial decrease (∼ 40-60%) of the condensable hydrocarbons (tar). Finally, the morphologic change of biochar was distinctive in the presence of CO2. Therefore, a series of the adsorption experiments with dye were conducted to preliminary explore the physico-chemical properties of biochar induced by CO2. Copyright © 2015 Elsevier Ltd. All rights reserved.
-
NASA Astrophysics Data System (ADS)
Lundblad, Nathan; Jarvis, Thomas; Paseltiner, Daniel; Lannert, Courtney
2016-05-01
We have proposed using NASA's Cold Atom Laboratory (CAL, launching to the International Space Station in 2017) to generate bubble-geometry Bose-Einstein condensates through radiofrequency dressing of an atom-chip magnetic trap. This geometry has not been truly realized terrestrially due to the perturbing influence of gravity, making it an ideal candidate for microgravity investigation aboard CAL. We report progress in the construction of a functional prototype of the orbital BEC apparatus: a compact atom-chip machine loaded by a 2D+MOT source, conventional 3D MOT, quadrupole trap, and transfer coil. We also present preliminary modeling of the dressed trap uniformity, which will crucially inform the geometric closure of the BEC shell surface as atom number, bubble radius, and bubble aspect ratio are varied. Finally, we discuss plans for experimental sequences to be run aboard CAL guided by intuition from ground-based prototype operation. JPL 1502172.
-
Taccheo, Stefano; Gebavi, Hrvoje; Monteville, Achille; Le Goffic, Olivier; Landais, David; Mechin, David; Tregoat, Denis; Cadier, Benoit; Robin, Thierry; Milanese, Daniel; Durrant, Tim
2011-09-26
We report on an extensive investigation of photodarkening in Yb-doped silica fibers. A set of similar fibers, covering a large Yb concentration range, was made so as to compare the photodarkening induced losses. Careful measurements were made to ensure equal and uniform inversion for all the tested fibers. The results show that, with the specific set-up, the stretching parameter obtained through fitting has a very limited variation. This gives more meaning to the fitting parameters. Results tend to indicate a square law dependence of the concentration of excited ions on the final saturated loss. We also demonstrate self-similarity of loss evolution when experimental curves are simply normalized to fitting parameters. This evidence of self-similarity also supports the possibility of introducing a preliminary figure of merit for Yb-doped fiber. This will allow the impact of photodarkening on laser/amplifier devices to be evaluated. © 2011 Optical Society of America
-
Experimental interstellar organic chemistry - Preliminary findings
NASA Technical Reports Server (NTRS)
Khare, B. N.; Sagan, C.
1973-01-01
Review of the results of some explicit experimental simulation of interstellar organic chemistry consisting in low-temperature high-vacuum UV irradiation of condensed simple gases known or suspected to be present in the interstellar medium. The results include the finding that acetonitrile may be present in the interstellar medium. The implication of this and other findings are discussed.
-
ERIC Educational Resources Information Center
WARREN, RICHARD D.; AND OTHERS
AN EXPERIMENTAL ACTION AND RESEARCH PROJECT WAS CONDUCTED DURING 1960-64 BY THE IOWA AGRICULTURAL AND HOME ECONOMICS EXPERIMENT STATION, IN COOPERATION WITH THE TENNESSEE VALLEY AUTHORITY, TO DETERMINE THE INFLUENCE OF AN INTENSIVE TRAINING PROGRAM FOR GENERAL MANAGERS OF LOCAL RETAIL FARM SUPPLY RETAIL BUSINESSES DEALING IN FERTILIZER AND…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-24
... experimental design, duration of the study, and the method of barred owl removal. Background The Service listed... and nonlethal), and the type of experimental design (demography vs. occupancy). All action...-FF01E00000] Experimental Removal of Barred Owls To Benefit Threatened Northern Spotted Owls; Final...
-
Speed Control Law for Precision Terminal Area In-Trail Self Spacing
NASA Technical Reports Server (NTRS)
Abbott, Terence S.
2002-01-01
This document describes a speed control law for precision in-trail airborne self-spacing during final approach. This control law was designed to provide an operationally viable means to obtain a desired runway threshold crossing time or minimum distance, one aircraft relative to another. The control law compensates for dissimilar final approach speeds between aircraft pairs and provides guidance for a stable final approach. This algorithm has been extensively tested in Monte Carlo simulation and has been evaluated in piloted simulation, with preliminary results indicating acceptability from operational and workload standpoints.
-
Impact Evaluation of an Addiction Intervention Program in a Quebec Prison
Arseneault, Catherine; Alain, Marc; Plourde, Chantal; Ferland, Francine; Blanchette-Martin, Nadine; Rousseau, Michel
2015-01-01
OBJECTIVES This study evaluates the effects of a prison-based addiction intervention program. The evaluation is based on a multidimensional data collection that draws a portrait of the respondents’ substance use, and of their psychological/emotional, social, and judicial spheres. It measures the changes, or lack thereof, in substance use; the psychological/emotional, social, and judicial spheres; as well as the post-treatment services used. METHOD A quasi-experimental repeated measures design (0, 6 weeks, and 6 months) was used. Effects of the program were identified by comparing the results obtained by a group of inmates who had participated in the program (n = 80; experimental group) with those of another group who had received no intervention (n = 70; control group). RESULTS The preliminary results suggested a certain treatment effect related to impulsivity and psychological distress. CONCLUSION Although the preliminary results were promising, the experimental and control groups did not differ significantly when more robust analyses were used. PMID:26056466
-
ERIC Educational Resources Information Center
Karsh, Kathryn G.
This final report describes activities of a federally funded project which developed an educational computer-assisted instructional program for persons with severe disabilities. A preliminary review of the literature identified specific inadequacies of most software for this population, such as: too few examples of a task or concept thus limiting…
-
NASA Astrophysics Data System (ADS)
Souli, M.; Dolégiéviez, P.; Fadil, M.; Gallardo, P.; Levallois, R.; Munoz, H.; Ozille, M.; Rouillé, G.; Galet, F.
2011-12-01
A cryogenic trap system called Cryotrap has been studied and developed in the framework of nuclear safety studies for SPIRAL2 accelerator. The main objective of Cryotrap is to confine and reduce strongly the migration of radioactive volatile isotopes in beam lines. These radioactive gases are produced after interaction between a deuteron beam and a fissile target. Mainly, Cryotrap is composed by a vacuum vessel and two copper thermal screens maintained separately at two temperatures T1=80 K and T2=20 K. A Cryocooler with two stages at previous temperatures is used to remove static heat losses of the cryostat and ensure an efficient cooling of the system. Due to strong radiological constraints that surround Cryotrap, the coupling system between Cryocooler and thermal screens is based on aluminum thermo-mechanical contraction. The main objective of this original design is to limit direct human maintenance interventions and provide maximum automated operations. A preliminary prototype of Cryotrap has been developed and tested at GANIL laboratory to validate its design, and determine its thermal performance and trapping efficiency. In this paper, we will first introduce briefly SPIRAL2 project and discuss the main role of Cryotrap in nuclear safety of the accelerator. Then, we will describe the proposed conceptual design of Cryotrap and its main characteristics. After that, we will focus on test experiment and analyze experimental data. Finally, we will present preliminary results of gas trapping efficiency tests.
-
NASA Astrophysics Data System (ADS)
Yagüe, C.; Maqueda, G.; Ramos, D.; Sastre, M.; Viana, S.; Serrano, E.; Morales, G.; Ayarzagüena, B.; Viñas, C.; Sánchez, E.
2009-04-01
An Atmospheric Boundary Layer campaign was developed in Spain along June 2008 at the CIBA (Research Centre for the Lower Atmosphere) site which is placed on a fairly homogeneous terrain in the centre of an extensive plateau (41°49' N, 4°56' W). Different instrumentation at several levels was available on a new 10m meteorological mast, including temperature and humidity sensors, wind vanes and cup anemometers, as well as one sonic anemometer. Besides, two quartz-based microbarometers were installed at 50 and 100m on the main permanent 100m tower placed at CIBA. Three additional microbarometers were deployed on the surface on a triangular array of approximately 200 m side, and a tethered balloon was used in order to record vertical profiles of temperature, wind and humidity up to 1000m. Finally, a GRIMM particle monitor (MODEL 365), which can be used to continuously measure each six seconds simultaneously the PM10, PM2.5 and PM1 values, was deployed at 1.5m. This work will show some preliminary results from the campaign CIBA 2008, analysing the main physical processes present in the atmospheric Nocturnal Boundary Layer (NBL), the different stability periods observed and the corresponding turbulent parameters, as well as the coherent structures detected. The pressure perturbations measured from the surface and tower levels make possible to study the main wave parameters from wavelet transform, and compared the structures detected by the microbarometers with those detected in the wind and particles records.
-
NASA Technical Reports Server (NTRS)
Howard, D. F.
1977-01-01
The preliminary design of the over-the-wing flight propulsion system installation and nacelle component and systems design features of a short-haul, powered lift aircraft are presented. Economic studies are also presented and show that high bypass, low pressure ratio turbofan engines have the potential of providing an economical propulsion system for achieving the very quiet aircraft noise level of 95 EPNdB on a 152.4 m sideline.
-
Novel image processing approach to detect malaria
NASA Astrophysics Data System (ADS)
Mas, David; Ferrer, Belen; Cojoc, Dan; Finaurini, Sara; Mico, Vicente; Garcia, Javier; Zalevsky, Zeev
2015-09-01
In this paper we present a novel image processing algorithm providing good preliminary capabilities for in vitro detection of malaria. The proposed concept is based upon analysis of the temporal variation of each pixel. Changes in dark pixels mean that inter cellular activity happened, indicating the presence of the malaria parasite inside the cell. Preliminary experimental results involving analysis of red blood cells being either healthy or infected with malaria parasites, validated the potential benefit of the proposed numerical approach.
-
Early Results from the Advanced Radiation Protection Thick GCR Shielding Project
NASA Technical Reports Server (NTRS)
Norman, Ryan B.; Clowdsley, Martha; Slaba, Tony; Heilbronn, Lawrence; Zeitlin, Cary; Kenny, Sean; Crespo, Luis; Giesy, Daniel; Warner, James; McGirl, Natalie;
2017-01-01
The Advanced Radiation Protection Thick Galactic Cosmic Ray (GCR) Shielding Project leverages experimental and modeling approaches to validate a predicted minimum in the radiation exposure versus shielding depth curve. Preliminary results of space radiation models indicate that a minimum in the dose equivalent versus aluminum shielding thickness may exist in the 20-30 g/cm2 region. For greater shield thickness, dose equivalent increases due to secondary neutron and light particle production. This result goes against the long held belief in the space radiation shielding community that increasing shielding thickness will decrease risk to crew health. A comprehensive modeling effort was undertaken to verify the preliminary modeling results using multiple Monte Carlo and deterministic space radiation transport codes. These results verified the preliminary findings of a minimum and helped drive the design of the experimental component of the project. In first-of-their-kind experiments performed at the NASA Space Radiation Laboratory, neutrons and light ions were measured between large thicknesses of aluminum shielding. Both an upstream and a downstream shield were incorporated into the experiment to represent the radiation environment inside a spacecraft. These measurements are used to validate the Monte Carlo codes and derive uncertainty distributions for exposure estimates behind thick shielding similar to that provided by spacecraft on a Mars mission. Preliminary results for all aspects of the project will be presented.
-
Enhanced equivalence class formation by the delay and relational functions of meaningful stimuli.
Arntzen, Erik; Nartey, Richard K; Fields, Lanny
2015-05-01
Undergraduates in six groups of 10 attempted to form three 3-node 5-member equivalence classes (A → B → C → D → E) under the simultaneous protocol. In five of six groups, all stimuli were abstract shapes; in the PIC group, C stimuli were pictures with the remainder being abstract shapes. Before class formation, participants in the Identity-S and Identity-D groups were given preliminary training to form identity conditional discriminations with the C stimuli using simultaneous and 6 s delayed matching-to-sample procedures, respectively. In the Arbitrary-S and Arbitrary-D groups, before class formation, arbitrary conditional discriminations were formed between C and X stimuli using simultaneous and 6 s delayed matching-to-sample procedures, respectively. With no preliminary training, classes in the PIC and ABS groups were formed by 80% and 0% of participants, respectively. After preliminary training, class formation (yield) increased with delay, regardless of relational type. For each of the two delays, yield was slightly greater after forming arbitrary- instead of identity-relations. Yield was greatest, however, when a class contained a meaningful stimulus (PIC). During failed class formation, probes produced experimenter-defined relations, participant-defined relations, and unsystematic responding; delay, but not the relation type in preliminary training influenced relational and indeterminate responding. These results suggest how meaningful stimuli enhance equivalence class formation. © Society for the Experimental Analysis of Behavior.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
J. A. Smith; D. L. Cottle; B. H. Rabin
2013-09-01
This report summarizes work conducted to-date on the implementation of new laser-based capabilities for characterization of bond strength in nuclear fuel plates, and presents preliminary results obtained from fresh fuel studies on as-fabricated monolithic fuel consisting of uranium-10 wt.% molybdenum alloys clad in 6061 aluminum by hot isostatic pressing. Characterization involves application of two complementary experimental methods, laser-shock testing and laser-ultrasonic imaging, collectively referred to as the Laser Shockwave Technique (LST), that allows the integrity, physical properties and interfacial bond strength in fuel plates to be evaluated. Example characterization results are provided, including measurement of layer thicknesses, elastic properties ofmore » the constituents, and the location and nature of generated debonds (including kissing bonds). LST provides spatially localized, non-contacting measurements with minimum specimen preparation, and is ideally suited for applications involving radioactive materials, including irradiated materials. The theoretical principles and experimental approaches employed in characterizing nuclear fuel plates are described, and preliminary bond strength measurement results are discussed, with emphasis on demonstrating the capabilities and limitations of these methods. These preliminary results demonstrate the ability to distinguish bond strength variations between different fuel plates. Although additional development work is necessary to validate and qualify the test methods, these results suggest LST is viable as a method to meet fuel qualification requirements to demonstrate acceptable bonding integrity.« less
-
Festa, G; Grazzi, F; Pietropaolo, A; Scherillo, A; Schooneveld, E M
2017-12-01
Experimental tests are presented that assess the cross-talk level among three scintillation detectors used as neutron counters exploiting the thermal neutron radiative capture on Cd. The measurements were done at the INES diffractometer operating at the ISIS spallation neutron source (Rutherford Appleton Laboratory, UK). These tests follow a preliminary set of measurements performed on the same instrument to study the effectiveness of this thermal neutron counting strategy in neutron diffraction measurements, typically performed on INES using squashed 3 He filled gas tubes. The experimental data were collected in two different geometrical configurations of the detectors and compared to results of Monte Carlo simulations, performed using the MCNP code. Copyright © 2017 Elsevier Ltd. All rights reserved.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-04
.... SUPPLEMENTARY INFORMATION: Case History The Department published its Preliminary Determination on November 12... are attached (e.g., by welding or fasteners) to form subassemblies, i.e., partially assembled...
-
The Rene 150 directionally solidified superalloy turbine blades, volume 1
NASA Technical Reports Server (NTRS)
Deboer, G. J.
1981-01-01
Turbine blade design and analysis, preliminary Rene 150 system refinement, coating adaptation and evaluation, final Rene 150 system refinement, component-test blade production and evaluation, engine-test blade production, and engine test are discussed.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-01
...: Case History On November 3, 2009, the Department published in the Federal Register its preliminary..., convenience, department, specialty retail, discount stores, and restaurants to their customers to package and...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-18
..., 2011) (Preliminary Results). The review covers one producer/ exporter, Quimica Amtex S.A. de C.V. The..., through June 30, 2010, is as follows: Weighted- Producer/exporter average margin (percentage) Quimica...
-
Half-unit weighted bilinear algorithm for image contrast enhancement in capsule endoscopy
NASA Astrophysics Data System (ADS)
Rukundo, Olivier
2018-04-01
This paper proposes a novel enhancement method based exclusively on the bilinear interpolation algorithm for capsule endoscopy images. The proposed method does not convert the original RBG image components to HSV or any other color space or model; instead, it processes directly RGB components. In each component, a group of four adjacent pixels and half-unit weight in the bilinear weighting function are used to calculate the average pixel value, identical for each pixel in that particular group. After calculations, groups of identical pixels are overlapped successively in horizontal and vertical directions to achieve a preliminary-enhanced image. The final-enhanced image is achieved by halving the sum of the original and preliminary-enhanced image pixels. Quantitative and qualitative experiments were conducted focusing on pairwise comparisons between original and enhanced images. Final-enhanced images have generally the best diagnostic quality and gave more details about the visibility of vessels and structures in capsule endoscopy images.
-
Final postflight hardware evaluation report RSRM-32 (STS-57)
NASA Technical Reports Server (NTRS)
Nielson, Greg
1993-01-01
This document is the final report for the postflight assessment of the RSRM-32 (STS-57) flight set. This report presents the disassembly evaluations performed at the Thiokol facilities in Utah and is a continuation of the evaluations performed at KSC (TWR-64239). The PEEP for this assessment is outlined in TWR-50051, Revision B. The PEEP defines the requirements for evaluating RSRM hardware. Special hardware issues pertaining to this flight set requiring additional or modified assessment are outlined in TWR-64237. All observed hardware conditions were documented on PFOR's which are included in Appendix A. Observations were compared against limits defined in the PEEP. Any observation that was categorized as reportable or had no defined limits was documented on a preliminary PFAR by the assessment engineers. Preliminary PFAR's were reviewed by the Thiokol SPAT Executive Board to determine if elevation to PFAR's was required.
-
NASA Technical Reports Server (NTRS)
1976-01-01
A preliminary identification of the Supporting Research and Technology (SR&T) necessary during the planned evolution of atmospheric cloud physics is discussed. All requirements are for subsequent flights over its expected ten year lifetime. Those components identified as requiring some SR&T work prior to inclusion are listed. A data sheet is included for each item, briefly justifying the need, giving general objectives for the proposed development effort and identifying approximate schedule requirements on the program.
-
ERIC Educational Resources Information Center
Sullivan, Sharon G.; Grabois, Andrew; Greco, Albert N.
2003-01-01
Includes six reports related to book trade statistics, including prices of U.S. and foreign materials; book title output and average prices; book sales statistics; book exports and imports; book outlets in the U.S. and Canada; and numbers of books and other media reviewed by major reviewing publications. (LRW)
-
Buchbinder, Rachelle; Page, Matthew J; Huang, Hsiaomin; Verhagen, Arianne P; Beaton, Dorcas; Kopkow, Christian; Lenza, Mario; Jain, Nitin B; Richards, Bethan; Richards, Pamela; Voshaar, Marieke; van der Windt, Danielle; Gagnier, Joel J
2017-12-01
The Outcome Measures in Rheumatology (OMERACT) Shoulder Core Outcome Set Special Interest Group (SIG) was established to develop a core outcome set (COS) for clinical trials of shoulder disorders. In preparation for OMERACT 2016, we systematically examined all outcome domains and measurement instruments reported in 409 randomized trials of interventions for shoulder disorders published between 1954 and 2015. Informed by these data, we conducted an international Delphi consensus study including shoulder trial experts, clinicians, and patients to identify key domains that should be included in a shoulder disorder COS. Findings were discussed at a stakeholder premeeting of OMERACT. At OMERACT 2016, we sought consensus on a preliminary core domain set and input into next steps. There were 13 and 15 participants at the premeeting and the OMERACT 2016 SIG meeting, respectively (9 attended both meetings). Consensus was reached on a preliminary core domain set consisting of an inner core of 4 domains: pain, physical function/activity, global perceived effect, and adverse events including death. A middle core consisted of 3 domains: emotional well-being, sleep, and participation (recreation and work). An outer core of research required to inform the final COS was also formulated. Our next steps are to (1) analyze whether participation (recreation and work) should be in the inner core, (2) conduct a third Delphi round to finalize definitions and wording of domains and reach final endorsement for the domains, and (3) determine which instruments fulfill the OMERACT criteria for measuring each domain.
-
A preliminary study of wildland fire pattern indicator reliability following an experimental fire
Albert Simeoni; Zachary C. Owens; Erik W. Christiansen; Abid Kemal; Michael Gallagher; Kenneth L. Clark; Nicholas Skowronski; Eric V. Mueller; Jan C. Thomas; Simon Santamaria; Rory M. Hadden
2017-01-01
An experimental fire was conducted in 2016, in the Pinelands National Reserve of New Jersey, to assess the reliability of the fire pattern indicators used in wildland fire investigation. Objects were planted in the burn area to support the creation of the indicators. Fuel properties and environmental data were recorded. Video and infrared cameras were used to document...
-
MASS TRANSIT: FTA Could Relieve New Starts Program Funding Constraints
2001-08-01
progress through a local or regional review of alternatives, develop preliminary engineering plans , and obtain FTA’s approval for final design.7 TEA-21...and transit programs can also be used to develop, plan , and/or construct these projects. 7The alternatives analysis stage provides information on the...include right-of-way acquisition, utility relocation, and the preparation of final construction plans and cost estimates. Background Page 5 GAO-01-987 New
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-28
... determination. See Certain Magnesia Carbon Bricks From the People's Republic of China: Preliminary Negative... circumstances included the Department's partial or full closure during the five-day period after the CVD...
-
NASA Technical Reports Server (NTRS)
1976-01-01
Progress in the development of the Atmospheric Cloud Physics Laboratory is outlined. The fluid subsystem, aerosol generator, expansion chamber, optical system, control systems, and software are included.
-
NASA Technical Reports Server (NTRS)
Dewitt, Richard L.
1978-01-01
The preliminary concept, specifications, and requirements of a reusable zero gravity combustion facility (0-GCF) for use by experimenters aboard the spacelab payload of the space transportation system (STS) orbiter are described. The facility will be amenable to any mission of the STS orbiter in which a spacelab habitable segment and pallet segment are integral and for which orbital mission plans specify induced accelerations of 0.0001 g or less for sufficiently long periods so as not to impact experiment performance.
-
Quiet Clean General Aviation Turbofan (QCGAT) technology study, volume 1
NASA Technical Reports Server (NTRS)
1975-01-01
The preliminary design of an engine which satisfies the requirements of a quiet, clean, general aviation turbofan (QCGAT) engine is described. Also an experimental program to demonstrate performance is suggested. The T700 QCGAT engine preliminary design indicates that it will radiate noise at the same level as an aircraft without engine noise, have exhaust emissions within the EPA 1981 Standards, have lower fuel consumption than is available in comparable size engines, and have sufficient life for five years between overhauls.
-
Quiet Clean Short-haul Experimental Engine (QCSEE) UTW fan preliminary design
NASA Technical Reports Server (NTRS)
1975-01-01
High bypass geared turbofan engines and propulsion systems designed for short-haul passenger aircraft are described. The propulsion technology required for future externally blown flap aircraft with engines located both under the wing and over the wing is emphasized. The aerodynamic and mechanical preliminary design of the QCSEE under the wing 1.34 pressure ratio fan with variable blade pitch is presented. Design information is given for two pitch change actuation systems which will provide reverse thrust.
-
Whole body pointing movements in transient microgravity: preliminary results.
Tagliabue, Michele; Pedrocchi, Alessandra; Gower, Valerio; Ferrigno, Giancarlo; Pozzo, Thierry
2004-07-01
The aim of the present study is a better comprehension of strategies of motor coordination during complex movements. In this field of research microgravity represent a unique experimental condition for the investigation of the role of equilibrium control in movement planning. Namely, here we focus on two important issues: the centre of mass control and the endpoint trajectory. Preliminary results of the center of mass position and the finger path curvature during pointing movements performed under normal and transient microgravity conditions are presented.
-
Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lee C. Cadwallader
2010-06-01
This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.
-
Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lee C. Cadwallader
2007-08-01
This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.
-
Preliminary studies of radiation coupling between remote soft X-ray laser amplifiers
NASA Astrophysics Data System (ADS)
Cairns, G.; Lewis, C. L. S.; Macphee, A. G.; Neely, D.; Holden, M.; Krishnan, J.; Tallents, G. J.; Key, M. H.; Norreys, P. N.; Smith, C. G.; Zhang, J.; Holden, P. B.; Pert, G. J.; Plowes, J.; Ramsden, S. A.
1994-01-01
Coupling of a soft X-ray laser beam with a relaying concave mirror in a sequentially pumped amplifier geometry using the Ne-like Ge system has been studied experimentally. Preliminary observations indicate an increase in the spatial coherence of the amplified relayed beam. In addition, near-field imaging of one of the amplifier plasmas shows a double-lobed intensity pattern of the emergent beam indicating refractive guiding of the amplified beam with components both normal and tangential to the target surface.
-
An Investigation of the Flow Physics of Acoustic Liners by Direct Numerical Simulation
NASA Technical Reports Server (NTRS)
Watson, Willie R. (Technical Monitor); Tam, Christopher
2004-01-01
This report concentrates on reporting the effort and status of work done on three dimensional (3-D) simulation of a multi-hole resonator in an impedance tube. This work is coordinated with a parallel experimental effort to be carried out at the NASA Langley Research Center. The outline of this report is as follows : 1. Preliminary consideration. 2. Computation model. 3. Mesh design and parallel computing. 4. Visualization. 5. Status of computer code development. 1. Preliminary Consideration.
-
CFD Validation Experiment of a Mach 2.5 Axisymmetric Shock-Wave Boundary-Layer Interaction
NASA Technical Reports Server (NTRS)
Davis, David O.
2015-01-01
Preliminary results of an experimental investigation of a Mach 2.5 two-dimensional axisymmetric shock-wave/boundary-layer interaction (SWBLI) are presented. The purpose of the investigation is to create a SWBLI dataset specifically for CFD validation purposes. Presented herein are the details of the facility and preliminary measurements characterizing the facility and interaction region. The results will serve to define the region of interest where more detailed mean and turbulence measurements will be made.
-
CFD Validation Experiment of a Mach 2.5 Axisymmetric Shock-Wave/Boundary-Layer Interaction
NASA Technical Reports Server (NTRS)
Davis, David Owen
2015-01-01
Preliminary results of an experimental investigation of a Mach 2.5 two-dimensional axisymmetric shock-wave/ boundary-layer interaction (SWBLI) are presented. The purpose of the investigation is to create a SWBLI dataset specifically for CFD validation purposes. Presented herein are the details of the facility and preliminary measurements characterizing the facility and interaction region. These results will serve to define the region of interest where more detailed mean and turbulence measurements will be made.
-
DOT National Transportation Integrated Search
2015-05-01
The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP composite piles for load-bearing in bridges. This report covers Task 7, Final Report - Thesis. : This final report covers Tasks 1, 2, 3, 5 ...
-
Atmosphere Behavior in Gas-Closed Mouse-Algal Systems: An Experimental and Modelling Study
NASA Technical Reports Server (NTRS)
Averner, M. M.; Moore, B., III; Bartholomew, I.; Wharton, R.
1985-01-01
A dual approach of mathematical modelling and laboratory experimentation aimed at examining the gas exchange characteristics of artificial animal/plant systems closed to the ambient atmosphere was initiated. The development of control techniques and management strategies for maintaining the atmospheric levels of carbon dioxide and oxygen at physiological levels is examined. A mathematical model simulating the atmospheric behavior in these systems was developed and an experimental gas closed system was constructed. These systems are described and preliminary results are presented.
-
2005-06-01
subsequently trigger a cascade of tumor cell death in experimental tumors [4,5]. Although massive necrosis can be induced, tumors usually regrow from a...the Statement of Work Task 2, experimental radiation therapy has been designed and initiated based on the MRI oximetry data. Preliminary data of control...Hoechst dye 33342 showed a significant reduction in perfused vessels at 2hr after CA4P, which recovered 24 h later. * Experimental radiation therapy a
-
DOT National Transportation Integrated Search
1991-06-01
This report documents the construction, initial evaluation and final evaluation of several experimental features which were incorporated as part of an overlay of an existing PCC pavement in order to determine the feasibility of extending the asphalti...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-02
... Terrace, street vacation, preliminary and final plat approval, adoption of a Planned Action Ordinance... the time a permit application is made to an earlier phase in the process, such as at the Comprehensive...
-
Preliminary investigation of RAP and RAS in HMAC : final report, February 2010.
DOT National Transportation Integrated Search
2010-02-01
A laboratory study was undertaken to investigate how various proportions of reclaimed asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) added to hot mixed asphalt concrete (HMAC) mixtures affect the Superpave performance grade of the blende...
-
Preliminary evaluation and analysis of LTPP faulting data : final report.
DOT National Transportation Integrated Search
2000-09-01
A major goal of the Long-Term Pavement Performance (LTPP) study is the development of recommendations for improving the design and construction of new and rehabilitated pavements to provide longer lasting pavements. As part of the condition monitorin...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-13
... annual weighted-average cost for the entire POR. See, e.g., Certain Pasta from Italy: Final Results of Antidumping Duty Administrative Review, 65 FR 77852 (December 13, 2000) (Pasta from Italy), and accompanying...
-
44 CFR 62.20 - Claims appeals.
Code of Federal Regulations, 2010 CFR
2010-10-01
... (includes contractors' estimates), detailing unit cost and quantities for the items needing repair or replacement; replacement cost proofs of loss; Preliminary Report; Final Report; detailed damaged personal... wind policies and any claim information submitted to the other companies; Waiver, Letter of Map...
-
44 CFR 62.20 - Claims appeals.
Code of Federal Regulations, 2011 CFR
2011-10-01
... (includes contractors' estimates), detailing unit cost and quantities for the items needing repair or replacement; replacement cost proofs of loss; Preliminary Report; Final Report; detailed damaged personal... wind policies and any claim information submitted to the other companies; Waiver, Letter of Map...
-
48 CFR 1404.7003 - Exceptions.
Code of Federal Regulations, 2010 CFR
2010-10-01
... operational purposes that have no public interest, educational, scientific, or research value; (b) Classified... preliminary planning reports that will appear later in revised or final form; (d) Journal and magazine articles; or (e) Disclosure materials containing any description, specification, data, plan, or drawing of...
-
DOT National Transportation Integrated Search
2010-02-01
It is important for many applications, such as intersection delay estimation and adaptive signal : control, to obtain vehicle turning movement information at signalized intersections. However, : vehicle turning movement information is very time consu...
-
Impact of an in-house emergency radiologist on report turnaround time.
Lamb, Leslie; Kashani, Paria; Ryan, John; Hebert, Guy; Sheikh, Adnan; Thornhill, Rebecca; Fasih, Najla
2015-01-01
One of the many challenges facing emergency departments (EDs) across North America is timely access to emergency radiology services. Academic institutions, which are typically also regional referral centres, frequently require cross-sectional studies to be performed 24 hours a day with expedited final reports to accelerate patient care and ED flow. The purpose of this study was to determine if the presence of an in-house radiologist, in addition to a radiology resident dedicated to the ED, had a significant impact on report turnaround time. Preliminary and final report turnaround times, provided by the radiology resident and staff, respectively, for patients undergoing computed tomography or ultrasonography of their abdomen/pelvis in 2008 (before the implementation of emergency radiology in-house staff service) were compared to those performed during the same time frame in 2009 and 2010 (after staffing protocols were changed). A total of 1,624 reports were reviewed. Overall, there was no statistically significant decrease in the preliminary report turnaround times between 2008 and 2009 (p = 0.1102), 2009 and 2010 (p = 0.6232), or 2008 and 2010 (p = 0.0890), although times consistently decreased from a median of 2.40 hours to 2.08 hours to 2.05 hours (2008 to 2009 to 2010). There was a statistically significant decrease in final report turnaround times between 2008 and 2009 (p < 0.0001), 2009 and 2010 (p < 0.0011), and 2008 and 2010 (p < 0.0001). Median final report times decreased from 5.00 hours to 3.08 hours to 2.75 hours in 2008, 2009, and 2010, respectively. There was also a significant decrease in the time interval between preliminary and final reports between 2008 and 2009 (p < 0.0001) and 2008 and 2010 (p < 0.0001) but no significant change between 2009 and 2010 (p = 0.4144). Our results indicate that the presence of a dedicated ED radiologist significantly reduces final report turnaround time and thus may positively impact the time to ED patient disposition. Patient care is improved when attending radiologists are immediately available to read complex films, both in terms of health care outcomes and regarding the need for repeat testing. Providing emergency physicians with accurate imaging findings as rapidly as possible facilitates effective and timely management and thus optimizes patient care.
-
Xue, Chao; Quan, Li-Di; Yang, Shan-Qing; Wang, Bing-Peng; Wu, Jun-Fei; Shao, Cheng-Gang; Tu, Liang-Cheng; Milyukov, Vadim; Luo, Jun
2014-01-01
This paper describes the preliminary measurement of the Newtonian gravitational constant G with the angular acceleration feedback method at HUST. The apparatus has been built, and preliminary measurement performed, to test all aspects of the experimental design, particularly the feedback function, which was recently discussed in detail by Quan et al. The experimental results show that the residual twist angle of the torsion pendulum at the signal frequency introduces 0.4 ppm to the value of G. The relative uncertainty of the angular acceleration of the turntable is approximately 100 ppm, which is mainly limited by the stability of the apparatus. Therefore, the experiment has been modified with three features: (i) the height of the apparatus is reduced almost by half, (ii) the aluminium shelves were replaced with shelves made from ultra-low expansion material and (iii) a perfect compensation of the laboratory-fixed gravitational background will be carried out. With these improvements, the angular acceleration is expected to be determined with an uncertainty of better than 10 ppm, and a reliable value of G with 20 ppm or below will be obtained in the near future. PMID:25201996
-
Xue, Chao; Quan, Li-Di; Yang, Shan-Qing; Wang, Bing-Peng; Wu, Jun-Fei; Shao, Cheng-Gang; Tu, Liang-Cheng; Milyukov, Vadim; Luo, Jun
2014-10-13
This paper describes the preliminary measurement of the Newtonian gravitational constant G with the angular acceleration feedback method at HUST. The apparatus has been built, and preliminary measurement performed, to test all aspects of the experimental design, particularly the feedback function, which was recently discussed in detail by Quan et al. The experimental results show that the residual twist angle of the torsion pendulum at the signal frequency introduces 0.4 ppm to the value of G. The relative uncertainty of the angular acceleration of the turntable is approximately 100 ppm, which is mainly limited by the stability of the apparatus. Therefore, the experiment has been modified with three features: (i) the height of the apparatus is reduced almost by half, (ii) the aluminium shelves were replaced with shelves made from ultra-low expansion material and (iii) a perfect compensation of the laboratory-fixed gravitational background will be carried out. With these improvements, the angular acceleration is expected to be determined with an uncertainty of better than 10 ppm, and a reliable value of G with 20 ppm or below will be obtained in the near future. © 2014 The Author(s) Published by the Royal Society. All rights reserved.
-
Preliminary Study of a Hybrid Helicon-ECR Plasma Source
NASA Astrophysics Data System (ADS)
M. Hala, A.; Oksuz, L.; Ximing, Zhu
2016-08-01
A new type of hybrid discharge is experimentally investigated in this work. A helicon source and an electron cyclotron resonance (ECR) source were combined to produce plasma. As a preliminary study of this type of plasma, the optical emission spectroscopy (OES) method was used to obtain values of electron temperature and density under a series of typical conditions. Generally, it was observed that the electron temperature decreases and the electron density increases as the pressure increased. When increasing the applied power at a certain pressure, the average electron density at certain positions in the discharge does not increase significantly possibly due to the high degree of neutral depletion. Electron temperature increased with power in the hybrid mode. Possible mechanisms of these preliminary observations are discussed.
-
Vestibular Function Research (VFR) experiment. Phase B: Design definition study
NASA Technical Reports Server (NTRS)
1978-01-01
The Vestibular Functions Research (VFR) Experiment was established to investigate the neurosensory and related physiological processes believed to be associated with the space flight nausea syndrome and to develop logical means for its prediction, prevention and treatment. The VFR Project consists of ground and spaceflight experimentation using frogs as specimens. The phase B Preliminary Design Study provided for the preliminary design of the experiment hardware, preparation of performance and hardware specification and a Phase C/D development plan, establishment of STS (Space Transportation System) interfaces and mission operations, and the study of a variety of hardware, experiment and mission options. The study consist of three major tasks: (1) mission mode trade-off; (2) conceptual design; and (3) preliminary design.
-
Measuring Plasma Formation Field Strength and Current Loss in Pulsed Power Diodes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Johnston, Mark D.; Patel, Sonal G.; Falcon, Ross Edward
This LDRD investigated plasma formation, field strength, and current loss in pulsed power diodes. In particular the Self-Magnetic Pinch (SMP) e-beam diode was studied on the RITS-6 accelerator. Magnetic fields of a few Tesla and electric fields of several MV/cm were measured using visible spectroscopy techniques. The magnetic field measurements were then used to determine the current distribution in the diode. This distribution showed that significant beam current extends radially beyond the few millimeter x-ray focal spot diameter. Additionally, shielding of the magnetic field due to dense electrode surface plasmas was observed, quantified, and found to be consistent with themore » calculated Spitzer resistivity. In addition to the work on RITS, measurements were also made on the Z-machine looking to quantify plasmas within the power flow regions. Measurements were taken in the post-hole convolute and final feed gap regions on Z. Dopants were applied to power flow surfaces and measured spectroscopically. These measurements gave species and density/temperature estimates. Preliminary B-field measurements in the load region were attempted as well. Finally, simulation work using the EMPHASIS, electromagnetic particle in cell code, was conducted using the Z MITL conditions. The purpose of these simulations was to investigate several surface plasma generations models under Z conditions for comparison with experimental data.« less
-
AGARD Index of Publications, 1977 - 1979.
1980-08-01
therefore, experimental verification of calculation Walter Schutz In AGARD Fracture Mach Design Methodology methods, hypotheses etc. is very time...2-. 3-. or 4-D navigation initial stages of preliminary design analysis The state of the art systems and allows experimental or theoretical...Technol. on Weapons Systems Design Dot. 1978 1ES WITH WINGS NON -LEVEL 23 01 AERONAUTICS (GENERAL) J Stanley Ausman In AGARD The Impact of Integrated
-
ERIC Educational Resources Information Center
Churches, Richard; McAleavy, Tony
2016-01-01
This publication contains 12 (A3 open-out) poster-style reports of teacher experimental research. The style of presentation parallels the type of preliminary reporting common at academic conferences and postgraduate events. At the same time, it aims to act as a form of short primer to introduce teachers to the basic options that there are when…
-
[Development of a continuous blood pressure monitoring and recording system].
Zhang, Yang; Li, Yong; Gao, Shumei; Song, Yilin
2012-09-01
A small experimental system is constructed with working principle of continuous blood pressure monitoring based on the volume compensation method. The preliminary experimental results show that the system can collect blood pressure signals at the radial artery effectively. The digital PID algorithm can track the variation of blood pressure. And the accuracy of continuous blood pressure detecting achieve the level of same kind of product.
-
Large-area sheet task advanced dendritic web growth development
NASA Technical Reports Server (NTRS)
Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hopkins, R. H.; Meier, D.; Schruben, J.
1982-01-01
The thermal stress model was used to generate the design of a low stress lid and shield configuration, which was fabricated and tested experimentally. In preliminary tests, the New Experimental Web Growth Facility performed as designed, producing web on the first run. These experiments suggested desirable design modifications in the melt level sensing system to improve further its performance, and these are being implemented.
-
Mazzone, P; Arena, P; Cantelli, L; Spampinato, G; Sposato, S; Cozzolino, S; Demarinis, P; Muscato, G
2016-07-01
The use of robotics in neurosurgery and, particularly, in stereotactic neurosurgery, is becoming more and more adopted because of the great advantages that it offers. Robotic manipulators easily allow to achieve great precision, reliability, and rapidity in the positioning of surgical instruments or devices in the brain. The aim of this work was to experimentally verify a fully automatic "no hands" surgical procedure. The integration of neuroimaging to data for planning the surgery, followed by application of new specific surgical tools, permitted the realization of a fully automated robotic implantation of leads in brain targets. An anthropomorphic commercial manipulator was utilized. In a preliminary phase, a software to plan surgery was developed, and the surgical tools were tested first during a simulation and then on a skull mock-up. In such a way, several tools were developed and tested, and the basis for an innovative surgical procedure arose. The final experimentation was carried out on anesthetized "large white" pigs. The determination of stereotactic parameters for the correct planning to reach the intended target was performed with the same technique currently employed in human stereotactic neurosurgery, and the robotic system revealed to be reliable and precise in reaching the target. The results of this work strengthen the possibility that a neurosurgeon may be substituted by a machine, and may represent the beginning of a new approach in the current clinical practice. Moreover, this possibility may have a great impact not only on stereotactic functional procedures but also on the entire domain of neurosurgery.
-
Maurage, Pierre; Campanella, Salvatore
2013-01-01
Crossmodal processing (i.e., the construction of a unified representation stemming from distinct sensorial modalities inputs) constitutes a crucial ability in humans' everyday life. It has been extensively explored at cognitive and cerebral levels during the last decade among healthy controls. Paradoxically however, and while difficulties to perform this integrative process have been suggested in a large range of psychopathological states (e.g., schizophrenia and autism), these crossmodal paradigms have been very rarely used in the exploration of psychiatric populations. The main aim of the present paper is thus to underline the experimental and clinical usefulness of exploring crossmodal processes in psychiatry. We will illustrate this proposal by means of the recent data obtained in the crossmodal exploration of emotional alterations in alcohol-dependence. Indeed, emotional decoding impairments might have a role in the development and maintenance of alcohol-dependence, and have been extensively investigated by means of experiments using separated visual or auditory stimulations. Besides these unimodal explorations, we have recently conducted several studies using audio-visual crossmodal paradigms, which has allowed us to improve the ecological validity of the unimodal experimental designs and to offer new insights on the emotional alterations among alcohol-dependent individuals. We will show how these preliminary results can be extended to develop a coherent and ambitious research program using crossmodal designs in various psychiatric populations and sensory modalities. We will finally end the paper by underlining the various potential clinical applications and the fundamental implications that can be raised by this emerging project. PMID:23898250
-
Genoni, Alessandro
2013-07-09
Following the X-ray constrained wave function approach proposed by Jayatilaka, we have devised a new technique that allows to extract molecular orbitals strictly localized on small molecular fragments from sets of experimental X-ray structure factors amplitudes. Since the novel strategy enables to obtain electron distributions that have quantum mechanical features and that can be easily interpreted in terms of traditional chemical concepts, the method can be also considered as a new useful tool for the determination and the analysis of charge densities from high-resolution X-ray experiments. In this paper, we describe in detail the theory of the new technique, which, in comparison to our preliminary work, has been improved both treating the effects of isotropic secondary extinctions and introducing a new protocol to halt the fitting procedure against the experimental X-ray scattering data. The performances of the novel strategy have been studied both in function of the basis-sets flexibility and in function of the quality of the considered crystallographic data. The tests performed on four different systems (α-glycine, l-cysteine, (aminomethyl)phosphonic acid and N-(trifluoromethyl)formamide) have shown that the achievement of good statistical agreements with the experimental measures mainly depends on the quality of the crystal structures (i.e., geometry positions and thermal parameters) used in the X-ray constrained calculations. Finally, given the reliable transferability of the obtained Extremely Localized Molecular Orbitals (ELMOs), we envisage to exploit the novel approach to construct new ELMOs databases suited to the development of linear-scaling methods for the refinement of macromolecular crystal structures.
-
Cannabidiol in humans-the quest for therapeutic targets.
Zhornitsky, Simon; Potvin, Stéphane
2012-05-21
Cannabidiol (CBD), a major phytocannabinoid constituent of cannabis, is attracting growing attention in medicine for its anxiolytic, antipsychotic, antiemetic and anti-inflammatory properties. However, up to this point, a comprehensive literature review of the effects of CBD in humans is lacking. The aim of the present systematic review is to examine the randomized and crossover studies that administered CBD to healthy controls and to clinical patients. A systematic search was performed in the electronic databases PubMed and EMBASE using the key word "cannabidiol". Both monotherapy and combination studies (e.g., CBD + ∆9-THC) were included. A total of 34 studies were identified: 16 of these were experimental studies, conducted in healthy subjects, and 18 were conducted in clinical populations, including multiple sclerosis (six studies), schizophrenia and bipolar mania (four studies), social anxiety disorder (two studies), neuropathic and cancer pain (two studies), cancer anorexia (one study), Huntington's disease (one study), insomnia (one study), and epilepsy (one study). Experimental studies indicate that a high-dose of inhaled/intravenous CBD is required to inhibit the effects of a lower dose of ∆9-THC. Moreover, some experimental and clinical studies suggest that oral/oromucosal CBD may prolong and/or intensify ∆9-THC-induced effects, whereas others suggest that it may inhibit ∆9-THC-induced effects. Finally, preliminary clinical trials suggest that high-dose oral CBD (150-600 mg/d) may exert a therapeutic effect for social anxiety disorder, insomnia and epilepsy, but also that it may cause mental sedation. Potential pharmacokinetic and pharmacodynamic explanations for these results are discussed.
-
Cannabidiol in Humans—The Quest for Therapeutic Targets
Zhornitsky, Simon; Potvin, Stéphane
2012-01-01
Cannabidiol (CBD), a major phytocannabinoid constituent of cannabis, is attracting growing attention in medicine for its anxiolytic, antipsychotic, antiemetic and anti-inflammatory properties. However, up to this point, a comprehensive literature review of the effects of CBD in humans is lacking. The aim of the present systematic review is to examine the randomized and crossover studies that administered CBD to healthy controls and to clinical patients. A systematic search was performed in the electronic databases PubMed and EMBASE using the key word “cannabidiol”. Both monotherapy and combination studies (e.g., CBD + ∆9-THC) were included. A total of 34 studies were identified: 16 of these were experimental studies, conducted in healthy subjects, and 18 were conducted in clinical populations, including multiple sclerosis (six studies), schizophrenia and bipolar mania (four studies), social anxiety disorder (two studies), neuropathic and cancer pain (two studies), cancer anorexia (one study), Huntington’s disease (one study), insomnia (one study), and epilepsy (one study). Experimental studies indicate that a high-dose of inhaled/intravenous CBD is required to inhibit the effects of a lower dose of ∆9-THC. Moreover, some experimental and clinical studies suggest that oral/oromucosal CBD may prolong and/or intensify ∆9-THC-induced effects, whereas others suggest that it may inhibit ∆9-THC-induced effects. Finally, preliminary clinical trials suggest that high-dose oral CBD (150–600 mg/d) may exert a therapeutic effect for social anxiety disorder, insomnia and epilepsy, but also that it may cause mental sedation. Potential pharmacokinetic and pharmacodynamic explanations for these results are discussed. PMID:24281562
-
1989-10-23
817) 824-5606. Reelfoot Lake Water Level believes that the proposed timber EIS No. 890197. Final, USA. UT, Tooele Management Plan. Implementation...2: Incidenial lake erit The potential need for an incidental take permit is discussed in Section 4.4.1, Regional Environment. Comment No. 3...and Crow Indian Tribes. Yellowstone, E02, Lake Catamount ResortAvailability Big Horn and Rosebud Counties, MT, Construction. Special Use Permit
-
1984-09-01
Inhalation Toxicology, Mehlman, Crammer , and Shapiro, editors, 302-344, Pathotox Publishers, Inc., Park Forest South, Illinois (1977). 8. Shimkin, M. and G...Laboratory Studies. (3) Final Rule , Pesticide Programs; Good Laboratory Practice Standards; 48 Federal Register (FR) 53963-53969, 29 November 1983. (4...Final Rule , Toxic Substances Control; Good Laboratory Practice Standards; 48 Federal Register (FR) 53922-53944, 29 November 1983. b. Facilities were
-
Development of Korean Smartphone addiction proneness scale for youth.
Kim, Dongil; Lee, Yunhee; Lee, Juyoung; Nam, JeeEun Karin; Chung, Yeoju
2014-01-01
This study developed a Smartphone Addiction Proneness Scale (SAPS) based on the existing internet and cellular phone addiction scales. For the development of this scale, 29 items (1.5 times the final number of items) were initially selected as preliminary items, based on the previous studies on internet/phone addiction as well as the clinical experience of involved experts. The preliminary scale was administered to a nationally representative sample of 795 students in elementary, middle, and high schools across South Korea. Then, final 15 items were selected according to the reliability test results. The final scale consisted of four subdomains: (1) disturbance of adaptive functions, (2) virtual life orientation, (3) withdrawal, and (4) tolerance. The final scale indicated a high reliability with Cronbach's α of .880. Support for the scale's criterion validity has been demonstrated by its relationship to the internet addiction scale, KS-II (r = .49). For the analysis of construct validity, we tested the Structural Equation Model. The results showed the four-factor structure to be valid (NFI = .943, TLI = .902, CFI = .902, RMSEA = .034). Smartphone addiction is gaining a greater spotlight as possibly a new form of addiction along with internet addiction. The SAPS appears to be a reliable and valid diagnostic scale for screening adolescents who may be at risk of smartphone addiction. Further implications and limitations are discussed.
-
Development of Korean Smartphone Addiction Proneness Scale for Youth
Kim, Dongil; Lee, Yunhee; Lee, Juyoung; Nam, JeeEun Karin; Chung, Yeoju
2014-01-01
This study developed a Smartphone Addiction Proneness Scale (SAPS) based on the existing internet and cellular phone addiction scales. For the development of this scale, 29 items (1.5 times the final number of items) were initially selected as preliminary items, based on the previous studies on internet/phone addiction as well as the clinical experience of involved experts. The preliminary scale was administered to a nationally representative sample of 795 students in elementary, middle, and high schools across South Korea. Then, final 15 items were selected according to the reliability test results. The final scale consisted of four subdomains: (1) disturbance of adaptive functions, (2) virtual life orientation, (3) withdrawal, and (4) tolerance. The final scale indicated a high reliability with Cronbach's α of .880. Support for the scale's criterion validity has been demonstrated by its relationship to the internet addiction scale, KS-II (r = .49). For the analysis of construct validity, we tested the Structural Equation Model. The results showed the four-factor structure to be valid (NFI = .943, TLI = .902, CFI = .902, RMSEA = .034). Smartphone addiction is gaining a greater spotlight as possibly a new form of addiction along with internet addiction. The SAPS appears to be a reliable and valid diagnostic scale for screening adolescents who may be at risk of smartphone addiction. Further implications and limitations are discussed. PMID:24848006
-
Final analysis and design of a thermal protection system for 8-foot HTST combustor
NASA Technical Reports Server (NTRS)
Moskowitz, S.
1973-01-01
The cylindrical shell combustor with T-bar supports in the 8-foot HTST at the NASA-Langley Research Center encountered vibratory fatigue cracking over a period of 50-250 tunnel tests within a limited range of the required operating envelope. A preliminary design study provided several suitable thermal protection system designs for the combustor, one of which was a two-pass regenerative type air-cooled omega-shaped segment liner. A final design layout of the omega segment liner was prepared and analyzed for steady-state and transient conditions. The design of a support system for the fuel spray bar assembly was also included. Detail drawings suitable for fabrication purposes were also prepared. Liner design problems defined during the preliminary study included (1) the ingress of gas into the attachment bulb section of the omega segment, (2) the large thermal gradient along the leg of the omega bulb attachment section and, (3) the local peak metal temperature at the radius between the liner ID and the leg of the bulb attachment. These were resolved during the final design task. Analyses of the final design of the omega segment liner indicated that all design goals were met and the design provided the capability of operating over the required test envelope with a life expectancy substantially above the goal of 1500 cycles.
-
SEADS 3.0 Sectoral Energy/Employment Analysis and Data System
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roop, Joseph M.; Anderson, David A.; Schultz, Robert W.
2007-12-17
SEADS 3.0, the Sectoral Energy/Employment Analysis and Data System, is a revision and upgrading of SEADS--PC, a software package designed for the analysis of policy that could be described by modifying final demands of consumer, businesses, or governments (Roop, et al., 1995). If a question can be formulated so that implications can be translated into changes in final demands for goods and services, then SEADS 3.0 provides a quick and easy tool to assess preliminary impacts. And SEADS 3.0 should be considered just that: a quick and easy way to get preliminary results. Often a thorough answer, even to suchmore » a simple question as, “What would be the effect on U. S. energy use and employment if the Federal Government doubled R&D expenditures?” requires a more sophisticated analytical framework than the input-output structure embedded in SEADS 3.0. This tool uses a static, input-output model to assess the impacts of changes in final demands on first industry output, then employment and energy use. The employment and energy impacts are derived by multiplying the industry outputs (derived from the changed final demands) by industry-specific energy and employment coefficients. The tool also allows for the specification of regional or state employment impacts, though this option is not available for energy impacts.« less
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-07
... 507 acres of real estate containing the CDC/NIOSH's Lake Lynn Experimental Mine located in Springhill... mine tunnels servicing the Experimental Mine. The purpose and need of the proposed acquisition and construction improvements secures the currently leased Experimental Mine for the long-term continuation of mine...
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rack, Frank; Storms, Michael; Schroeder, Derryl
The primary accomplishments of the JOI Cooperative Agreement with DOE/NETL in this quarter were (1) the preliminary postcruise evaluation of the tools and measurement systems that were used during ODP Leg 204 to study hydrate deposits on Hydrate Ridge, offshore Oregon from July through September 2002; and (2) the preliminary study of the hydrate-bearing core samples preserved in pressure vessels and in liquid nitrogen cryofreezers, which are now stored at the ODP Gulf Coast Repository in College Station, TX. During ODP Leg 204, several newly modified downhole tools were deployed to better characterize the subsurface lithologies and environments hosting microbialmore » populations and gas hydrates. A preliminary review of the use of these tools is provided herein. The DVTP, DVTP-P, APC-methane, and APC-Temperature tools (ODP memory tools) were used extensively and successfully during ODP Leg 204 aboard the D/V JOIDES Resolution. These systems provided a strong operational capability for characterizing the in situ properties of methane hydrates in subsurface environments on Hydrate Ridge during ODP Leg 204. Pressure was also measured during a trial run of the Fugro piezoprobe, which operates on similar principles as the DVTP-P. The final report describing the deployments of the Fugro Piezoprobe is provided in Appendix A of this report. A preliminary analysis and comparison between the piezoprobe and DVTP-P tools is provided in Appendix B of this report. Finally, a series of additional holes were cored at the crest of Hydrate Ridge (Site 1249) specifically geared toward the rapid recovery and preservation of hydrate samples as part of a hydrate geriatric study partially funded by the Department of Energy (DOE). In addition, the preliminary results from gamma density non-invasive imaging of the cores preserved in pressure vessels are provided in Appendix C of this report. An initial visual inspection of the samples stored in liquid nitrogen is provided in Appendix D of this report.« less
-
Investigation of Multiphase Flow in a Packed Bed Reactor Under Microgravity Conditions
NASA Technical Reports Server (NTRS)
Lian, Yongsheng; Motil, Brian; Rame, Enrique
2016-01-01
In this paper we study the two-phase flow phenomena in a packed bed reactor using an integrated experimental and numerical method. The cylindrical bed is filled with uniformly sized spheres. In the experiment water and air are injected into the bed simultaneously. The pressure distribution along the bed will be measured. The numerical simulation is based on a two-phase flow solver which solves the Navier-Stokes equations on Cartesian grids. A novel coupled level set and moment of fluid method is used to construct the interface. A sequential method is used to position spheres in the cylinder. Preliminary experimental results showed that the tested flow rates resulted in pulse flow. The numerical simulation revealed that air bubbles could merge into larger bubbles and also could break up into smaller bubbles to pass through the pores in the bed. Preliminary results showed that flow passed through regions where the porosity is high. Comparison between the experimental and numerical results in terms of pressure distributions at different flow injection rates will be conducted. Comparison of flow phenomena under terrestrial gravity and microgravity will be made.
-
NASA Astrophysics Data System (ADS)
Križan, Peter; Matúš, Miloš; Beniak, Juraj; Šooš, Ľubomír
2018-01-01
During the biomass densification can be recognized various technological variables and also material parameters which significantly influences the final solid biofuels (pellets) quality. In this paper, we will present the research findings concerning relationships between technological and material variables during densification of sunflower hulls. Sunflower hulls as an unused source is a typical product of agricultural industry in Slovakia and belongs to the group of herbaceous biomass. The main goal of presented experimental research is to determine the impact of compression pressure, compression temperature and material particle size distribution on final biofuels quality. Experimental research described in this paper was realized by single-axis densification, which was represented by experimental pressing stand. The impact of mentioned investigated variables on the final briquettes density and briquettes dilatation was determined. Mutual interactions of these variables on final briquettes quality are showing the importance of mentioned variables during the densification process. Impact of raw material particle size distribution on final biofuels quality was also proven by experimental research on semi-production pelleting plant.
-
Documentation: Motivation and training or automation
NASA Technical Reports Server (NTRS)
Mouton, M. L.
1970-01-01
The road blocks and mental blocks in areas where automation is not taking care of basic documentation problems are discussed. Original project documentation, documentation for project maintenance, and comparison of preliminary and final documentation are described. The use of flow charts is also mentioned.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-06
... functional excipient, such as dextrose or starch, where the excipient constitutes at least 2 percent, by... Memorandum at 4; Corrosion- Resistant Carbon Steel Flat Products from the Republic of Korea: Final Results of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-01
... from the Russian Federation (Russia). The period of review (POR) is July 1, 2011, through June 30, 2012... notice of final results of administrative review for all shipments of solid urea from Russia entered, or...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-09
... list of uses is illustrative and provided for descriptive purposes only. \\8\\ ``GIN4 Mo,'' ``GIN5'' and... elements which would indicate a reasonable correlation between the underlying costs and the final sales...
-
32 CFR 651.49 - Preliminary phase.
Code of Federal Regulations, 2010 CFR
2010-07-01
... data, including required studies. (3) Preparation of draft and final EISs (DEISs and FEISs), and... relationship between the timing of the preparation of environmental analyses and the tentative planning and..., preparation of a general expected schedule for future specific implementing (tiered) actions that will involve...
-
32 CFR 651.49 - Preliminary phase.
Code of Federal Regulations, 2011 CFR
2011-07-01
... data, including required studies. (3) Preparation of draft and final EISs (DEISs and FEISs), and... relationship between the timing of the preparation of environmental analyses and the tentative planning and..., preparation of a general expected schedule for future specific implementing (tiered) actions that will involve...
-
Modular space station phase B extension preliminary system design. Volume 5: configuration analyses
NASA Technical Reports Server (NTRS)
Stefan, A. J.; Goble, G. J.
1972-01-01
The initial and growth modular space station configurations are described, and the evolutionary steps arriving at the final configuration are outlined. Supporting tradeoff studies and analyses such as stress, radiation dosage, and micrometeoroid and thermal protection are included.
-
Code of Federal Regulations, 2014 CFR
2014-07-01
... preliminary or final plans, the Corporation shall explore the tenanting opportunities proposed by the... that the Developer make every effort to lease space to Persons on the List and to report to the...
-
Code of Federal Regulations, 2012 CFR
2012-07-01
... preliminary or final plans, the Corporation shall explore the tenanting opportunities proposed by the... that the Developer make every effort to lease space to Persons on the List and to report to the...
-
DOT National Transportation Integrated Search
2009-11-01
The Lane Transit District, in cooperation with the National Bus Rapid Transit Institute (NBRTI) at the University of South Florida, completed a preliminary implementation study to determine the potential impacts of a new and innovative transit priori...
-
NASA Technical Reports Server (NTRS)
Chapman, A. T.; Cochran, J. K.
1976-01-01
The construction of a solar furnace was completed and it was tested after a preliminary alignment of the heliostat mirrors. After final alignment, the solar furnace is used for directional solidification experiments designed to simulate space conditions.
-
ARSENIC ADSORPTION AND DESORPTION BY WATER TREATMENT RESIDUALS: PRELIMINARY RESULTS. (R830842)
The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...
-
NASA Technical Reports Server (NTRS)
1976-01-01
The Work Breakdown Structure (WBS) and Dictionary (DR-MA-06) for initial and subsequent flights of the Atmospheric Cloud Physics Laboratory (ACPL) is presented. An attempt is made to identify specific equipment and components in each of the eleven subsystems; they are listed under the appropriate subdivisions of the WBS. The reader is cautioned that some of these components are likely to change substantially during the course of the study, and the list provided should only be considered representative.
-
Preliminary sonic boom correlation of predicted and measured levels for STS-1 entry
NASA Technical Reports Server (NTRS)
Garcia, F., Jr.; Morrison, K. M.; Jones, J. H.; Henderson, H. R.
1982-01-01
A preliminary analysis correlating peaks from sonic boom pressure signatures recorded during the descent trajectory of the Orbiter Columbia, which landed in the dry lake bed at Edwards Air Force Base (EAFB), California, with measured wind tunnel signatures extrapolated from flight altitudes to the ground has been made for Mach numbers ranging from 1.3 to 6. The flight pressure signatures were recorded by microphones positioned at ground level near the groundtrack, whereas the wind tunnel signatures were measured during a test of a 0.0041-scale model Orbiter. The agreement between overpressure estimates based on wind tunnel data using preliminary flight trajectory data and oscillograph traces from ground measurements appears reasonable at this time for the range of Mach numbers considered. More detailed studies using final flight trajectory data and digitized ground measured data will be performed.
-
Method for laser spot welding monitoring
NASA Astrophysics Data System (ADS)
Manassero, Giorgio
1994-09-01
As more powerful solid state laser sources appear on the market, new applications become technically possible and important from the economical point of view. For every process a preliminary optimization phase is necessary. The main parameters, used for a welding application by a high power Nd-YAG laser, are: pulse energy, pulse width, repetition rate and process duration or speed. In this paper an experimental methodology, for the development of an electrooptical laser spot welding monitoring system, is presented. The electromagnetic emission from the molten pool was observed and measured with appropriate sensors. The statistical method `Parameter Design' was used to obtain an accurate analysis of the process parameter that influence process results. A laser station with a solid state laser coupled to an optical fiber (1 mm in diameter) was utilized for the welding tests. The main material used for the experimental plan was zinc coated steel sheet 0.8 mm thick. This material and the related spot welding technique are extensively used in the automotive industry, therefore, the introduction of laser technology in production line will improve the quality of the final product. A correlation, between sensor signals and `through or not through' welds, was assessed. The investigation has furthermore shown the necessity, for the modern laser production systems, to use multisensor heads for process monitoring or control with more advanced signal elaboration procedures.
-
Non-integer viscoelastic constitutive law to model soft biological tissues to in-vivo indentation.
Demirci, Nagehan; Tönük, Ergin
2014-01-01
During the last decades, derivatives and integrals of non-integer orders are being more commonly used for the description of constitutive behavior of various viscoelastic materials including soft biological tissues. Compared to integer order constitutive relations, non-integer order viscoelastic material models of soft biological tissues are capable of capturing a wider range of viscoelastic behavior obtained from experiments. Although integer order models may yield comparably accurate results, non-integer order material models have less number of parameters to be identified in addition to description of an intermediate material that can monotonically and continuously be adjusted in between an ideal elastic solid and an ideal viscous fluid. In this work, starting with some preliminaries on non-integer (fractional) calculus, the "spring-pot", (intermediate mechanical element between a solid and a fluid), non-integer order three element (Zener) solid model, finally a user-defined large strain non-integer order viscoelastic constitutive model was constructed to be used in finite element simulations. Using the constitutive equation developed, by utilizing inverse finite element method and in vivo indentation experiments, soft tissue material identification was performed. The results indicate that material coefficients obtained from relaxation experiments, when optimized with creep experimental data could simulate relaxation, creep and cyclic loading and unloading experiments accurately. Non-integer calculus viscoelastic constitutive models, having physical interpretation and modeling experimental data accurately is a good alternative to classical phenomenological viscoelastic constitutive equations.
-
Genome-wide alterations of the DNA replication program during tumor progression
NASA Astrophysics Data System (ADS)
Arneodo, A.; Goldar, A.; Argoul, F.; Hyrien, O.; Audit, B.
2016-08-01
Oncogenic stress is a major driving force in the early stages of cancer development. Recent experimental findings reveal that, in precancerous lesions and cancers, activated oncogenes may induce stalling and dissociation of DNA replication forks resulting in DNA damage. Replication timing is emerging as an important epigenetic feature that recapitulates several genomic, epigenetic and functional specificities of even closely related cell types. There is increasing evidence that chromosome rearrangements, the hallmark of many cancer genomes, are intimately associated with the DNA replication program and that epigenetic replication timing changes often precede chromosomic rearrangements. The recent development of a novel methodology to map replication fork polarity using deep sequencing of Okazaki fragments has provided new and complementary genome-wide replication profiling data. We review the results of a wavelet-based multi-scale analysis of genomic and epigenetic data including replication profiles along human chromosomes. These results provide new insight into the spatio-temporal replication program and its dynamics during differentiation. Here our goal is to bring to cancer research, the experimental protocols and computational methodologies for replication program profiling, and also the modeling of the spatio-temporal replication program. To illustrate our purpose, we report very preliminary results obtained for the chronic myelogeneous leukemia, the archetype model of cancer. Finally, we discuss promising perspectives on using genome-wide DNA replication profiling as a novel efficient tool for cancer diagnosis, prognosis and personalized treatment.
-
NASA Astrophysics Data System (ADS)
Falsafioon, Mehdi; Aidoun, Zine; Poirier, Michel
2017-12-01
A wide range of industrial refrigeration systems are good candidates to benefit from the cooling and refrigeration potential of supersonic ejectors. These are thermally activated and can use waste heat recovery from industrial processes where it is abundantly generated and rejected to the environment. In other circumstances low cost heat from biomass or solar energy may also be used in order to produce a cooling effect. Ejector performance is however typically modest and needs to be maximized in order to take full advantage of the simplicity and low cost of the technology. In the present work, the behavior of ejectors with different nozzle exit positions has been investigated using a prototype as well as a CFD model. The prototype was used in order to measure the performance advantages of refrigerant (R-134a) flowing inside the ejector. For the CFD model, it is assumed that the ejectors are axi-symmetric along x-axis, thus the generated model is in 2D. The preliminary CFD results are validated with experimental data over a wide range of conditions and are in good accordance in terms of entrainment and compression ratios. Next, the flow patterns of four different topologies are studied in order to discuss the optimum geometry in term of ejector entrainment improvement. Finally, The numerical simulations were used to find an optimum value corresponding to maximized entrainment ratio for fixed operating conditions.
-
Experimenter's data package for the descending layers rocket
NASA Technical Reports Server (NTRS)
Earle, Greg; Herrero, Fred; Foster, John; Buonsanto, Mike; Satya-Narayana, P.
1992-01-01
In response to a proposal from Science Applications International Corporation (SAIC), NASA Headquarters has approved a sounding rocket mission designed to study the physics of intermediate layers in the Earth's ionosphere at middle latitudes. The experiment will be carried out by a team of scientists and engineers from the NASA Wallops Flight Facility, SAIC, the NASA Goddard Space Flight Center, and the Millstone Hill radar observatory. The mission will involve the launch of an instrumented sounding rocket from the Wallops Island rocket range in the summer of 1994, with the objective of penetrating a descending ionized layer in the E-region between altitudes of 115 and 140 km. Instrumentation aboard the rocket will measure the ion and neutral composition of the layer, its plasma density, driving wind and electric field forces, the thermal ion distribution function, and electron temperature. Depending on payload weight constraints and subject to availability, a particle detector to measure energetic ion and/or electron fluxes near the layer may also be included. This document was prepared as a reference for the NASA payload development and experiment teams, for distribution at the Project Initiation Conference (PIC). The design specifications discussed herein are therefore of a preliminary nature; the intent is to promote open discussions between experimenters and NASA engineers that will lead to a final design capable of achieving the experiment objectives.
-
Design definition of the Laser Atmospheric Wind Sounder (LAWS), phase 2. Volume 2: Final report
NASA Technical Reports Server (NTRS)
Wilson, D. J.
1992-01-01
Lockheed personnel, along with team member subcontractors and consultants, have performed a preliminary design for the LAWS Instrument. Breadboarding and testing of a LAWS class laser have also been performed. These efforts have demonstrated that LAWS is a feasible Instrument and can be developed with existing state-of-the-art technology. Only a commitment to fund the instrument development and deployment is required to place LAWS in orbit and obtain the anticipated science and operational forecasting benefits. The LAWS Science Team was selected in 1988-89 as were the competing LAWS phase 1/2 contractor teams. The LAWS Science Team developed requirements for the LAWS Instrument, and the NASA/LAWS project office defined launch vehicle and platform design constraints. From these requirements and constraints, the lockheed team developed LAWS Instrument concepts and configurations. A system designed to meet these requirements and constraints is outlined. The LAWS primary subsystem and interfaces - laser, optical, and receiver/processor - required to assemble a lidar are identified. Also identified are the support subsystems required for the lidar to function from space: structures and mechanical, thermal, electrical, and command and data management. The Lockheed team has developed a preliminary design of a LAWS Instrument System consisting of these subsystems and interfaces which will meet the requirements and objectives of the Science Team. This final report provides a summary of the systems engineering analyses and trades of the LAWS. Summaries of the configuration, preliminary designs of the subsystems, testing recommendations, and performance analysis are presented. Environmental considerations associated with deployment of LAWS are discussed. Finally, the successful LAWS laser breadboard effort is discussed along with the requirements and test results.
-
Inhalers and nebulizers: basic principles and preliminary measurements
NASA Astrophysics Data System (ADS)
Misik, Ondrej; Lizal, Frantisek; Asl, Vahid Farhikhteh; Belka, Miloslav; Jedelsky, Jan; Elcner, Jakub; Jicha, Miroslav
2018-06-01
Inhalers are hand-held devices which are used for administration of therapeutic aerosols via inhalation. Nebulizers are larger devices serving for home and hospital care using inhaled medication. This contribution describes the basic principles of dispersion of aerosol particles used in various types of inhalers and nebulizers, and lists the basic physical mechanisms contributing to the deposition of inhaled particles in the human airways. The second part of this article presents experimental setup, methodology and preliminary results of particle size distributions produced by several selected inhalers and nebulizers.
-
Measurement of the proton form factor ratio at low momentum transfer
DOE Office of Scientific and Technical Information (OSTI.GOV)
Friedman, Moshe
Experiment E08-007-II measured the proton elastic form factor ratio μG E=G M in the momentum transfer range of Q 2 ~ 0.02 - 0.08 GeV 2, the lowest ever measured by polarization transfer techniques. The experiment was performed at the Thomas Jefferson National Accelerator Facility in Newport News, Virginia, USA during 2012. A polarized electron beam with energies of 1.1, 1.7, and 2.2 GeV was elastically scattered off a polarized solid NH 3 target. The asymmetries between the cross section of positive and negative helicity states of the beam were determined. These asymmetries can be used to determine the formmore » factor ratio. In this thesis, we present the asymmetry analysis of the experiment, discuss the main challenges and show preliminary results for part of the data. Preliminary asymmetries indicate an increase in the form factor ratio above unity. However, a complete analysis is required before any conclusion can be made. Further analysis is ongoing, and final asymmetry results and form factor extraction is expected during 2017. We also present first results for 14N asymmetries for elastic and quasi-elastic scattering. The measured asymmetries are in agreement with the shell model approximation, within the low accuracy of the measurement. A change in the asymmetry sign between the elastic and the quasi-elastic processes is seen, and should motivate further theoretical studies. These experimental asymmetries will also be useful for systematic studies of other experiments using polarized NH 3 targets.« less
-
Guo, Liming; Shu, Ting; Li, Zhiqiang; Ju, Jinchuan; Fang, Xiaoting
2017-02-01
Among high power microwave (HPM) generators without guiding magnetic field, Cerenkov-type oscillator is expected to achieve a relatively high efficiency, which has already been realized in X-band in our previous simulation work. This paper presents the preliminary experimental investigations into an X-band Cerenkov-type HPM oscillator without guiding magnetic field. Based on the previous simulation structure, some modifications regarding diode structure were made. Different cathode structures and materials were tested in the experiments. By using a ring-shaped graphite cathode, microwave of about one hundred megawatt level was generated with a pure center frequency of 9.14 GHz, and an efficiency of about 1.3%. As analyzed in the paper, some practical issues reduce the efficiency in experiments, such as real features of the electron beam, probable breakdown regions on the cathode surface which can damage the diode, and so forth.
-
Researches on Preliminary Chemical Reactions in Spark-Ignition Engines
NASA Technical Reports Server (NTRS)
Muehlner, E.
1943-01-01
Chemical reactions can demonstrably occur in a fuel-air mixture compressed in the working cylinder of an Otto-cycle (spark ignition) internal-combustion engine even before the charge is ignited by the flame proceeding from the sparking plug. These are the so-called "prelinminary reactions" ("pre-flame" combustion or oxidation), and an exact knowledge of their characteristic development is of great importance for a correct appreciation of the phenomena of engine-knock (detonation), and consequently for its avoidance. Such reactions can be studied either in a working engine cylinder or in a combustion bomb. The first method necessitates a complicated experimental technique, while the second has the disadvantage of enabling only a single reaction to be studied at one time. Consequently, a new series of experiments was inaugurated, conducted in a motored (externally-driven) experimental engine of mixture-compression type, without ignition, the resulting preliminary reactions being detectable and measurable thermometrically.
-
An experimental study of stratospheric gravity waves - Design and preliminary results
NASA Astrophysics Data System (ADS)
Talagrand, O.; Ovarlez, H.
1984-02-01
The design of balloon-borne experimental apparatus for long-term gravitational-wave measurements in the stratosphere is reported, and preliminary results of a first test flight are presented. Two gondolas (each containing a pressure sensor; a temperature sensor; horizontal and vertical sonic anemometers; a fin equipped with crossed magnetometers; and data-processing, data-transmission, and control electronics) are suspended 100 and 300 m below a solar/terrestrial-IR-absorption-heated hot-air balloon drifting between altitudes 22 km (night) and 28 km (day); power is supplied by NiCd batteries recharged by solar cells. The path of the first flight, a circumnavigation beginning in Pretoria, South Africa and crossing South America and northern Australia, from December 11, 1982, to February 2, 1983 (when transmission ceased over southern Africa) is shown on a map, and sample data for a 36-h period are summarized in a graph.
-
Preliminary Planck constant measurements via UME oscillating magnet Kibble balance
NASA Astrophysics Data System (ADS)
Ahmedov, H.; Babayiğit Aşkın, N.; Korutlu, B.; Orhan, R.
2018-06-01
The UME Kibble balance project was initiated in the second half of 2014. During this period we have studied the theoretical aspects of Kibble balances, in which an oscillating magnet generates AC Faraday’s voltage in a stationary coil, and constructed a trial version to implement this idea. The remarkable feature of this approach is that it can establish the link between the Planck constant and a macroscopic mass by one single experiment in the most natural way. Weak dependences on variations of environmental and experimental conditions, small size, and other useful features offered by this novel approach reduce the complexity of the experimental set-up. This paper describes the principles of the oscillating magnet Kibble balance and gives details of the preliminary Planck constant measurements. The value of the Planck constant determined with our apparatus is \\boldsymbol{h}/{{\\boldsymbol{h}}\\boldsymbol 90}={1}{.000} {004}~ , with a relative standard uncertainty of 6 ppm.