A novel paradigm for engineering education: virtual internships with individualized mentoring and assessment of engineering thinking.

PubMed

Chesler, Naomi C; Ruis, A R; Collier, Wesley; Swiecki, Zachari; Arastoopour, Golnaz; Williamson Shaffer, David

2015-02-01

Engineering virtual internships are a novel paradigm for providing authentic engineering experiences in the first-year curriculum. They are both individualized and accommodate large numbers of students. As we describe in this report, this approach can (a) enable students to solve complex engineering problems in a mentored, collaborative environment; (b) allow educators to assess engineering thinking; and (c) provide an introductory experience that students enjoy and find valuable. Furthermore, engineering virtual internships have been shown to increase students'-and especially women's-interest in and motivation to pursue engineering degrees. When implemented in first-year engineering curricula more broadly, the potential impact of engineering virtual internships on the size and diversity of the engineering workforce could be dramatic.

First-Year Engineering Students' Views of the Nature of Engineering: Implications for Engineering Programmes

ERIC Educational Resources Information Center

Karatas, F. Ö.; Bodner, G. M.; Unal, Suat

2016-01-01

A study was conducted on the views of the nature of engineering held by 114 first-year engineering majors; the study built on prior work on views of the nature of science held by students, their instructors, and the general public. Open-coding analysis of responses to a 12-item questionnaire suggested that the participants held tacit beliefs that…

"MathePraxis"--Connecting First-Year Mathematics with Engineering Applications

ERIC Educational Resources Information Center

Harterich, Jorg; Kiss, Christine; Rooch, Aeneas; Monnigmann, Martin; Darup, Moritz Schulze; Span, Roland

2012-01-01

First-year engineering students often complain about their mathematics courses as the significance of the difficult and abstract calculus to their field of study remains unclear. We report on the project "MathePraxis", a feasibility study which was designed as a means to give first-year students some impression about the use of…

An Investigation into the Understanding and Skills of First-Year Electrical Engineering Students

ERIC Educational Resources Information Center

Smaill, C. R.; Rowe, G. B.; Godfrey, E.; Paton, R. O.

2012-01-01

In response to demands from industry and the profession for more graduates, first-year engineering numbers have grown considerably over the last decade, matched by an increasing diversity of academic backgrounds. In order to support first-year students effectively, and ensure the courses they take remain appropriately pitched, the academic…

First-Year Engineering Students' Portrayal of Engineering in a Proposed Museum Exhibit for Middle School Students

ERIC Educational Resources Information Center

Mena, Irene B.; Diefes-Dux, Heidi A.

2012-01-01

Students' perceptions of engineering have been documented through studies involving interviews, surveys, and word associations that take a direct approach to asking students about various aspects of their understanding of engineering. Research on perceptions of engineering rarely focuses on how students would portray engineering to others.…

A Democratic and Student-Centred Approach to Facilitating Teamwork Learning among First-Year Engineering Students: A Learning and Teaching Case Study

ERIC Educational Resources Information Center

Missingham, Dorothy; Matthews, Robert

2014-01-01

This work examines an innovative and evolving approach to facilitating teamwork learning in a generic first-year mechanical engineering course. Principles of inclusive, student-active and democratic pedagogy were utilised to engage students on both the social and personal planes. Learner opportunities to facilitate, direct and lead the learning…

Design of a Professional Practice Simulator for Educating and Motivating First-Year Engineering Students

ERIC Educational Resources Information Center

Chesler, Naomi C.; Arastoopour, Golnaz; D'Angelo, Cynthia M.; Bagley, Elizabeth A.; Shaffer, David Williamson

2013-01-01

Increasingly, first-year engineering curricula incorporate design projects. However, the faculty and staff effort and physical resources required for the number of students enrolled can be daunting and affect the quality of instruction. To reduce these costs, ensure a high quality educational experience, and reduce variability in student outcomes…

A Coding Scheme for Analysing Problem-Solving Processes of First-Year Engineering Students

ERIC Educational Resources Information Center

Grigg, Sarah J.; Benson, Lisa C.

2014-01-01

This study describes the development and structure of a coding scheme for analysing solutions to well-structured problems in terms of cognitive processes and problem-solving deficiencies for first-year engineering students. A task analysis approach was used to assess students' problem solutions using the hierarchical structure from a…

The impact of a living learning community on first-year engineering students

NASA Astrophysics Data System (ADS)

Flynn, Margaret A.; Everett, Jess W.; Whittinghill, Dex

2016-05-01

The purpose of this study was to investigate the impact of an engineering living and learning community (ELC) on first-year engineering students. A control group of non-ELC students was used to compare the experiences of the ELC participants. Analysis of survey data showed that there was significant differences between the ELC students and the non-ELC students in how they responded to questions regarding social support, academic support, connectedness to campus, and satisfaction with the College of Engineering and the institution as a whole. Particularly, there were significant differences between ELC and non-ELC students for questions related to feeling like part of an engineering community, having strong relationships with peers, belonging to a supportive peer network, studying with engineering peers, and spending time with classmates outside of class.

Dropouts and Budgets: A Test of a Dropout Reduction Model among Students in Israeli Higher Education

ERIC Educational Resources Information Center

Bar-Am, Ran; Arar, Osama

2017-01-01

This article deals with the problem of student dropout during the first year in a higher education institution. To date, no model on a budget has been developed and tested to prevent dropout among Engineering Students. This case study was conducted among first-year students taking evening classes in two practical engineering colleges in Israel.…

Development of a Support Environment for First Year Students Taking Materials Science/Engineering

ERIC Educational Resources Information Center

Laoui, Tahar; O'Donoghue, John

2008-01-01

This paper is based on the experience acquired in teaching materials science/engineering to first year university students. It has been observed that students struggle with some of the fundamental materials concepts addressed in the module/course. This applies to delivered lectures but extends to the incorporation of tutorial sessions provided…

The potential of supplemental instruction in engineering education: creating additional peer-guided learning opportunities in difficult compulsory courses for first-year students

NASA Astrophysics Data System (ADS)

Malm, Joakim; Bryngfors, Leif; Mörner, Lise-Lotte

2016-09-01

Supplemental Instruction (SI) can be an efficient way of improving student success in difficult courses. Here, a study is made on SI attached to difficult first-year engineering courses. The results show that both the percentage of students passing a difficult first-year engineering course, and scores on the course exams are considerably higher for students attending SI, compared to students not attending. The study also shows that a higher percentage of female students attend SI, compared to male students. However, both genders seem to benefit to the same degree as a result of attending SI meetings. Also all students, independent of prior academic ability, benefit from attending SI. A qualitative study suggests that SI meetings provide elements important for understanding course material, which are missing from other scheduled learning opportunities in the courses.

The First Year of College: Understanding Student Persistence in Engineering

NASA Astrophysics Data System (ADS)

Hayden, Marina Calvet

This research study aimed to expand our understanding of the factors that influence student persistence in engineering. The unique experiences of engineering students were examined as they transitioned into and navigated their first year of college at a public research university in California. Most students provided similar responses with respect to the way they experienced the transition to college and social life. There was, however, wide student response variation regarding their experience of academic life and academic policies, as well as in their level of pre-college academic preparation and financial circumstances. One key finding was that students' experiences during the first year of college varied widely based on the extent to which they had acquired organizational and learning skills prior to college. The study used a mixed methods approach. Quantitative and qualitative data were collected through an online survey and one-on-one interviews conducted with freshman students near the end of their first year of college. The theoretical foundations of this study included Astin's Theory of Student Involvement and Tinto's Theory of Student Departure. The design of the study was guided by these theories which emphasize the critical importance of student involvement with the academic and social aspects of college during the first year of college.

Intervention to Improve Engineering Self-Efficacy and Sense of Belonging of First-Year Engineering Students

NASA Astrophysics Data System (ADS)

Jordan, Kari L.

The percentage of bachelor's degrees in STEM awarded to women and underrepresented minority students needs to increase dramatically to reach parity with their majority counterparts. While three key underrepresented minority (URM) groups, African Americans, Hispanic/Latinos, and Native Americans constitute some 30 percent of the overall undergraduate student population in the United States, the share of engineering degrees earned by members of these groups declines as degree level increases. Underrepresented minority students accounted for about 12% of engineering bachelor's degrees awarded in 2009, 7% of master's degrees and 3% of doctorates (NSF Science Resource Statistics, 2009). The percent in engineering has been steadily decreasing, while overall participation in higher education among these groups has increased considerably. Keeping those thoughts in mind it is important to examine the historical theories and frameworks that will help us not only understand why underrepresented minority students pursue and persist in STEM majors in low numbers, but to also develop interventions to improve the alarming statistics that hamper engineering diversity. As indicated by our past two U.S. Presidents, there has been an increased discussion on the national and state level regarding the number of students entering engineering disciplines in general and underrepresented minority students in particular. Something happens between a student's freshman year and the point they decide to either switch their major or drop out of school altogether. Some researchers attribute the high dropout rate of underrepresented minority students in engineering programs to low engineering self-efficacy (e.g. Jordan et al., 2011). A student's engineering self-efficacy is his/her belief that he/she can successfully navigate the engineering curriculum and eventually become a practicing engineer. A student's engineering self-efficacy is formed by mastery experiences, vicarious experiences, his/her physiological state, and social persuasions, such as student-professor interaction. Increasing the awareness of a student's engineering self-efficacy could potentially improve sense of belonging and persistence for underrepresented minority students in engineering. The hypothesis of this study is that an intervention during the first semester of an incoming freshman's tenure can help improve their engineering self-efficacy, sense of belonging, and overall retention in the engineering program. This study explored the following research questions: 1. What are the differences in engineering self-efficacy, and sense of belonging for first-year underrepresented minority engineering students compared to majority students? 2. What factors or variables should be considered and/or addressed in designing an intervention to increase engineering self-efficacy and sense of belonging amongst first-year underrepresented minority engineering students? 3. Can a small intervention during the beginning of the first semester improve a student's sense of belonging, engineering self-efficacy, and student-professor interaction? Using the race, social fit, and achievement study by Walton and Cohen as a model, the author developed an intervention consisting of short compelling videos of upperclass engineering students from diverse backgrounds. In these videos, students discussed their pursuit of the engineering degree, what obstacles they faced in terms of sense of belonging and coping efficacy, and how they overcame those obstacles. Treatment groups of students watched the videos during the first few weeks of the semester, and pre and post tests were administered to measure mean gains in the student's engineering self-efficacy, sense of belonging, and other variables. The results showed that underrepresented minority students had a lower sense of belonging than whites. The intervention used in the study contributed to mean gain increases in participants' engineering self-efficacy, which could ultimately improve persistence. A single intervention did not show a significant increase in students' sense of belonging; more work needs to be done to develop an effective intervention. The intervention is easily adaptable with insignificant cost, making it attractive for Minority Engineering Program (MEP) and other success program whose aim is to increase students' engineering self-efficacy.

Students' Changing Images of Engineering and Engineers. Research Brief

ERIC Educational Resources Information Center

Jocuns, Andrew; Stevens, Reed; Garrison, Lari; Amos, Daniel

2008-01-01

This study analyzes the images of engineers and engineering that students construct over the course of their undergraduate engineering educations. Students in their first year of study to become engineers knew very little about the work they would be doing as an engineer and their expectations were more specific, hopeful, and high status than…

Supplemental Instruction (SI) at the Faculty of Engineering (LTH), Lund University, Sweden. An Evaluation of the SI-Program at Five LTH Engineering Programs Autumn 2008

ERIC Educational Resources Information Center

Malm, Joakim; Bryngfors, Leif E.; Mörner, Lise-Lotte

2010-01-01

The study presents an evaluation of the SI program in five engineering programs within the Faculty of Engineering (LTH) based on data from questionnaires to SI participants and SI-Leaders, credits taken by the students during the first year, and average grade data from high school for the first year students. The results show that participation in…

Linking mathematics with engineering applications at an early stage - implementation, experimental set-up and evaluation of a pilot project

NASA Astrophysics Data System (ADS)

Rooch, Aeneas; Junker, Philipp; Härterich, Jörg; Hackl, Klaus

2016-03-01

Too difficult, too abstract, too theoretical - many first-year engineering students complain about their mathematics courses. The project MathePraxis aims to resolve this disaffection. It links mathematical methods as they are taught in the first semesters with practical problems from engineering applications - and thereby shall give first-year engineering students a vivid and convincing impression of where they will need mathematics in their later working life. But since real applications usually require more than basic mathematics and first-year engineering students typically are not experienced with construction, mensuration and the use of engineering software, such an approach is hard to realise. In this article, we show that it is possible. We report on the implementation of MathePraxis at Ruhr-Universität Bochum. We describe the set-up and the implementation of a course on designing a mass damper which combines basic mathematical techniques with an impressive experiment. In an accompanying evaluation, we have examined the students' motivation relating to mathematics. This opens up new perspectives how to address the need for a more practically oriented mathematical education in engineering sciences.

A Design-Based Engineering Graphics Course for First-Year Students.

ERIC Educational Resources Information Center

Smith, Shana Shiang-Fong

2003-01-01

Describes the first-year Introduction to Design course at Iowa State University which incorporates design for manufacturing and concurrent engineering principles into the curriculum. Autodesk Inventor was used as the primary CAD tool for parametric solid modeling. Test results show that student spatial visualization skills were dramatically…

A Phenomenographic Study: First Year Chemical Engineering Students' Conceptions of Energy in Dissolution Processes.

ERIC Educational Resources Information Center

Lyle, Kenneth S.; Robinson, William R.

2002-01-01

Describes the work of Ebenezer and Fraser as an example of the use of phenomenographic research in categorizing concepts of the factors involved in the dissolution of ionic compounds by students entering a first-year chemical engineering course at a university in South Africa. (MM)

Mathematics and its value for engineering students: what are the implications for teaching?

NASA Astrophysics Data System (ADS)

Harris, Diane; Black, Laura; Hernandez-Martinez, Paul; Pepin, Birgit; Williams, Julian; with the TransMaths Team

2015-04-01

Mathematics has long been known to be problematic for university engineering students and their teachers, for example, Scanlan.[1] This paper presents recent data gathered from interviews with engineering students who experienced problems with mathematics and their lecturers during their transition through the first year in different programme contexts. Our interviews with the students reveal how they understand the relation between engineering and mathematics and we draw on the concept of 'use- and exchange-value' to explore this relationship more fully. This paper challenges both the pedagogical practice of teaching non-contextualized mathematics and the lack of transparency regarding the significance of mathematics to engineering. We conclude that the value of mathematics in engineering remains a central problem, and argue that mathematics should be a fundamental concern in the design and practice of first-year engineering.

Analysis of Arguments Constructed by First-Year Engineering Students Addressing Electromagnetic Induction Problems

ERIC Educational Resources Information Center

Almudi, Jose Manuel; Ceberio, Mikel

2015-01-01

This study explored the quality of arguments used by first-year engineering university students enrolled in a traditional physics course dealing with electromagnetic induction and related problem solving where they had to assess whether the electromagnetic induction phenomenon would occur. Their conclusions were analyzed for the relevance of the…

An Analysis of First Year Engineering Students' Satisfaction with a Support Distance Learning Program in Mathematics

ERIC Educational Resources Information Center

Matzakos, Nikolaos M.; Kalogiannakis, Michail

2018-01-01

An online support distance-learning program in Mathematics was developed to aid first year engineering students for their transition from the secondary to the tertiary education in order to reinforce deficiencies they may have in mathematical knowledge. The aim of the present study is to examine, firstly, to what extent the attendance of such a…

The effectiveness of resources created by students as partners in explaining the relevance of mathematics in engineering education

NASA Astrophysics Data System (ADS)

Dunn, Michelle; Loch, Birgit; Scott, Wendy

2018-01-01

First-year engineering students often struggle to see the relevance of theoretical mathematical concepts for their future studies and professional careers. This is an issue, as students who do not see relevance in fundamental parts of their studies may disengage from these parts and focus their efforts on other subjects they think will be more useful to them. In this study, we surveyed engineering students enrolled in a first-year mathematics subject on their perceptions of the relevance of the individual mathematical topics taught. Surveys were administered at the start of semester when some of these topics were unknown to them, and again at the end of semester when students had not only studied all these topics but also watched a set of animated videos. These videos had been produced by higher-year students to explain where they had seen applications of the mathematical concepts presented in the first year. We notice differences between the perceived relevance of topics for future study and for professional careers, with relevance to study rated higher than relevance to careers. We also find that the animations are seen as helpful in understanding the relevance of first-year mathematics. The majority of students indicated that lecturers with students as partners should work collaboratively to produce future videos.

Necessity and Role of Introductory Education in the Engineering Education in University Level

NASA Astrophysics Data System (ADS)

Endo, Ginro

In the faculties of “Engineering” or “Science and Technology” of many universities, faculty stuffs are teaching the academic foundations of technology to the students. From the standing point of the students in engineering course, first their study should be started to be accustomed to the new studying situations in their universities or colleges, and then the students proceed to be adjusted to study engineering specialty. The former is or should be realized through liberal arts education in university level and extracurricular activities in the universities. However, the latter needs special education schemes. In the past, educational courses in universities were clearly divided into a liberal arts period and a specialty education period in Japan. In that system, the students in engineering were accustomed to the specialty education after their promotion to their engineering curriculum. At present, the students in the faculties must be engrossed in the study of engineering from their first year of the university education, because the science and technology have been very rapidly progressed and have made increase in the level and quantity of engineering education. In this article, the author discusses how should the faculty give the scholastic ability to the students in engineering from the early years of the university courses, and introduces the case studies of introductory education (or the first-year education) in the engineering education that has been done in a faculty to that the author belongs.

The Use of a Game-Based Project in Engineering Education: An Examination of the Academic Learning, Engagement and Motivation of First-Year Engineering Students

ERIC Educational Resources Information Center

Fang, Jun

2012-01-01

Two critical issues are of great concern in engineering education today: the increasingly broad requirements for 21st-century engineers and the lack of effective instructional approaches needed to produce students who meet the requirements. However, pedagogical approaches in engineering have remained relatively unchanged for the last 40 years and…

Educational Analysis of a First Year Engineering Physics Experiment on Standing Waves: Based on the ACELL Approach

ERIC Educational Resources Information Center

Bhathal, Ragbir; Sharma, Manjula D.; Mendez, Alberto

2010-01-01

This paper describes an educational analysis of a first year physics experiment on standing waves for engineering students. The educational analysis is based on the ACELL (Advancing Chemistry by Enhancing Learning in the Laboratory) approach which includes a statement of educational objectives and an analysis of student learning experiences. The…

Cause-Effect Analysis: Improvement of a First Year Engineering Students' Calculus Teaching Model

ERIC Educational Resources Information Center

van der Hoff, Quay; Harding, Ansie

2017-01-01

This study focuses on the mathematics department at a South African university and in particular on teaching of calculus to first year engineering students. The paper reports on a cause-effect analysis, often used for business improvement. The cause-effect analysis indicates that there are many factors that impact on secondary school teaching of…

Predicting Performance in a First Engineering Calculus Course: Implications for Interventions

ERIC Educational Resources Information Center

Hieb, Jeffrey L.; Lyle, Keith B.; Ralston, Patricia A. S.; Chariker, Julia

2015-01-01

At the University of Louisville, a large, urban institution in the south-east United States, undergraduate engineering students take their mathematics courses from the school of engineering. In the fall of their freshman year, engineering students take "Engineering Analysis I," a calculus-based engineering analysis course. After the…

The Accuracy of Student Grading in First-Year Engineering Courses

ERIC Educational Resources Information Center

Van Hattum-Janssen, Natascha; Pacheco, Jose Augusto; Vasconcelos, Rosa Maria

2004-01-01

Assessment has become a powerful tool to change student learning. In a project of the Council of Engineering Courses of the University of Minho, Portugal, students of textile engineering, apparel engineering and industrial electronics increased their participation in every aspect of their assessment process. The traditional exam was changed to…

The Intersection of Gender and Race: Exploring Chemical Engineering Students' Attitudes

ERIC Educational Resources Information Center

Goodwin, Allison; Verdín, Dina; Kirn, Adam; Satterfield, Derrick

2018-01-01

We surveyed 342 first-year engineering students at four U.S. institutions interested in a chemical engineering career about their feelings of belonging in engineering, motivation, and STEM identities. We compared these students by both gender and race/ethnicity on these attitudinal factors. We found several significant differences in…

Mathematical Preparedness for Tertiary Mathematics--A Need for Focused Intervention in the First Year?

ERIC Educational Resources Information Center

Du Preez, Jeanetta; Steyn, Tobia; Owen, Rina

2008-01-01

Ongoing action research at the University of Pretoria investigates first-year students' preparedness for a study in calculus. In 2005 first-year engineering students completed a mathematics diagnostic survey at the beginning and end of the year. In this article the results of the 2005 survey are compared with the students' final school marks in…

Motivating First-Year University Students by Interdisciplinary Study Projects

ERIC Educational Resources Information Center

Koch, Franziska D.; Dirsch-Weigand, Andrea; Awolin, Malte; Pinkelman, Rebecca J.; Hampe, Manfred J.

2017-01-01

In order to increase student commitment from the beginning of students' university careers, the Technische Universität Darmstadt has introduced interdisciplinary study projects involving first-year students from the engineering, natural, social and history, economics and/or human sciences departments. The didactic concept includes sophisticated…

Factors Affecting Students' Satisfaction in Engineering Disciplines: Traditional vs. Blended Approaches

ERIC Educational Resources Information Center

Martinez-Caro, Eva; Campuzano-Bolarin, Francisco

2011-01-01

In this paper a two-year field study was carried out to analyse how satisfaction differs across the traditional and blended learning methods. Altogether, 21 courses for graduate and postgraduate engineering students were evaluated. Several variables and their relationship with student satisfaction in the first year, with all courses delivered in…

Results in Developing an Engineering Degree Program in Safeguards and Security of Nuclear Materials at Moscow Engineering Physics Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kryuchkov, Eduard F.; Geraskin, Nikolay I.; Killinger, Mark H.

The world’s first master’s degree program in nuclear safeguards and security, established at Moscow Engineering Physics Institute (MEPhI), has now graduated nine classes of students. Most of the graduates have gone on to work at government agencies, research organizations, or obtain their PhD. In order to meet the demand for safeguards and security specialists at nuclear facilities, MEPhI established a 5½ year engineering degree program that provides more hands-on training desired by facilities. In February 2004, the first students began their studies in the new discipline Nuclear Material Safeguards and Nonproliferation. This class, as well as other subsequent classes, includedmore » students who started the program in their third year of studies, as the first 2½ years consists of general engineering curriculum. Fourteen students made up the first graduating class, receiving their engineering degrees in February 2007. The topics addressed in this paper include specific features of the program caused by peculiarities of Russian education legislation and government quality control of academic education. This paper summarizes the main joint actions undertaken by MEPhI and the US National Laboratories in conjunction with the U.S. Department of Energy, to develop the engineering degree program. Also discussed are the program’s specific training requirements, student internships, and job placement. The paper concludes with recommendations from a recent international seminar on nonproliferation education and training.« less

Developing Teaching of Mathematics to First Year Engineering Students

ERIC Educational Resources Information Center

Jaworski, Barbara; Matthews, Janette

2011-01-01

Engineering Students Understanding Mathematics (ESUM) is a developmental research project at a UK university. The motivating aim is that engineering students should develop a more conceptual understanding of mathematics through their participation in an innovation in teaching. A small research team has both studied and contributed to innovation,…

First-year engineering students' views of the nature of engineering: implications for engineering programmes

NASA Astrophysics Data System (ADS)

Karataş, F. Ö.; Bodner, G. M.; Unal, Suat

2016-01-01

A study was conducted on the views of the nature of engineering held by 114 first-year engineering majors; the study built on prior work on views of the nature of science held by students, their instructors, and the general public. Open-coding analysis of responses to a 12-item questionnaire suggested that the participants held tacit beliefs that engineering (1) involves problem solving; (2) is a form of applied science; (3) involves the design of artefacts or systems; (4) is subject to various constraints; and (5) requires teamwork. These beliefs, however, were often unsophisticated, and significant aspects of the field of engineering as described in the literature on engineering practices were missing from the student responses. The results of this study are important because students' beliefs have a strong influence on what they value in a classroom situation, what they attend to in class, and how they choose to study for a course.

First-year engineering students' views of the nature of engineering

NASA Astrophysics Data System (ADS)

Karatas, Faik O.

The changing nature of engineering problems and new challenges that result from globalization and new ways of doing business have triggered calls for a revolutionary shift in engineering education. To respond to these challenges, the engineering education paradigm has been revised by adding more design and humanities/social sciences components to it. Philosophy, sociology, and history of engineering are more often cited as a major part of engineering education in this movement. Research on the nature of engineering (NOE), which is derived from philosophy, sociology, and the history of engineering, could have as much potential impact on engineering education as research on the nature of science (NOS) has had on science education. Thus, it is surprising that there has been no noteworthy research on this topic. The purpose of this study is to describe and determine first-year engineering students' views of the NOE and how these students differentiate engineering from science. In this research, an open-ended Views of the Nature of Engineering questionnaire (VNOE) was employed to collect baseline data. Semi-structured interviews based on the VNOE questionnaire were conducted with the second cohort of the participants. Data analysis was guided by a traditional phenomenographic approach, which is a branch of the hermeneutic tradition, coupled to constant comparison technique. The results of this study indicated that the participants' overall views of the nature of engineering were not ill-developed, but rather unarticulated. Moreover, the relationship between engineering and science was considered unidirectional rather than bidirectional. The results of this study could be used to inform engineering educators, first-year engineering coordinators, and policy makers as well as serving as the base for further research and potential implications for future first-year and K-12 engineering education.

First-Year Students' Psychological and Behavior Adaptation to College: The Role of Coping Strategies and Social Support

ERIC Educational Resources Information Center

Wang, Aiping; Chen, Lang; Zhao, Bo; Xu, Yan

2006-01-01

This study investigates 311 first-year students' psychological and behavior adaptation to college and the mediate role of coping strategies and social support. The investigates reveal that: (1) first-year students who are from countryside, live in poor families, speak in dialects or major in science and engineering have poorer adaptation to…

a Study of Women Engineering Students and Time to Completion of First-Year Required Courses at Texas A&M University

NASA Astrophysics Data System (ADS)

Kimball, Jorja; Cole, Bryan; Hobson, Margaret; Watson, Karan; Stanley, Christine

This paper reports findings on gender that were part of a larger study reviewing time to completion of course work that includes the first two semesters of calculus, chemistry, and physics, which are often considered the stumbling points or "barrier courses" to an engineering baccalaureate degree. Texas A&M University terms these courses core body of knowledge (CBK), and statistical analysis was conducted on two cohorts of first-year enrolling engineering students at the institution. Findings indicate that gender is statistically significantly related to completion of CBK with female engineering students completing required courses faster than males at the .01 level (p = 0.008). Statistical significance for gender and ethnicity was found between white male and white female students at the .01 level (p = 0.008). Descriptive analysis indicated that of the five majors studied (chemical, civil, computer, electrical, and mechanical engineering), women completed CBK faster than men, and African American and Hispanic women completed CBK faster than males of the same ethnicity.

Motivational Project-Based Laboratory for a Common First Year Electrical Engineering Course

ERIC Educational Resources Information Center

Nedic, Zorica; Nafalski, Andrew; Machotka, Jan

2010-01-01

Over the past few years many universities worldwide have introduced a common first year for all engineering disciplines. This is despite the opinion of many academics that large classes have negative effects on the learning outcomes of first year students. The University of South Australia is also faced with low motivation amongst engineering…

Experiential and Contextual Factors That Shape Engineering Interest and Educational Decision-Making Processes among Female Students

ERIC Educational Resources Information Center

Swan, Amy

2015-01-01

This qualitative study explores the formation of educational and vocational goals among female first-year engineering students at two community colleges and one four-year institution, as well as contextual influences on this process. Participants' pathways to college are also explored, as well as their pathways into engineering. The findings…

Negotiating Cultural Humility: First-Year Engineering Students' Development in a Life-Long Journey

ERIC Educational Resources Information Center

Groll, Lorie

2013-01-01

One of the most sought after abilities in matriculating engineering students is the ability to negotiate cultural differences and build sustainable partnerships with others. This core attribute of the National Academy of Engineers' Engineer of 2020 is one of the least researched areas in engineering education literature. The ABET Engineering…

Engineering Students Designing a Statistical Procedure for Quantifying Variability

ERIC Educational Resources Information Center

Hjalmarson, Margret A.

2007-01-01

The study examined first-year engineering students' responses to a statistics task that asked them to generate a procedure for quantifying variability in a data set from an engineering context. Teams used technological tools to perform computations, and their final product was a ranking procedure. The students could use any statistical measures,…

The Effects of Students' Course Perceptions on Their Domain Identification, Motivational Beliefs, and Goals

ERIC Educational Resources Information Center

Jones, Brett D.; Tendhar, Chosang; Paretti, Marie C.

2016-01-01

The purpose of this study was to examine whether students' perceptions in a first-year university engineering course affected their engineering identification, motivational beliefs, and engineering major and career goals. Based on current motivation models and theories, we hypothesized that students' perceptions of the components of the MUSIC…

Mathematics and Its Value for Engineering Students: What Are the Implications for Teaching?

ERIC Educational Resources Information Center

Harris, Diane; Black, Laura; Hernandez-Martinez, Paul; Pepin, Birgit; Williams, Julian

2015-01-01

Mathematics has long been known to be problematic for university engineering students and their teachers, for example, Scanlan. This paper presents recent data gathered from interviews with engineering students who experienced problems with mathematics and their lecturers during their transition through the first year in different programme…

Using Cognitive Load Theory to Interpret Student Difficulties with a Problem-Based Learning Approach to Engineering Education: A Case Study

ERIC Educational Resources Information Center

Peters, Michael

2015-01-01

This article reports on an investigation with first year undergraduate Product Design and Management students within a School of Engineering and Applied Science. The students at the time of this investigation had studied fundamental engineering science and mathematics for one semester. The students were given an open ended, ill-formed problem…

Fostering Passion among First Year Engineering Students

ERIC Educational Resources Information Center

Mazumder, Quamrul H.

2010-01-01

Engineering is a complex field of study. Declining enrollment in engineering programs in the United States is of concern and understanding the various factors that contribute to this decline is in order. Fostering a higher level of student engagement with the content may foster passion towards engineering which could increase academic competency…

Excel Exercises for First-Year Engineering Students

ERIC Educational Resources Information Center

Wagner, Geri

2006-01-01

Several Excel applications are presented which are part of the syllabus in the first semester of engineering studies at Haugesund College. The aim of the applications is for the students to acquire both computing skills and mathematical understanding at the same time. The applications cover numerical solution of equations, differentiation,…

Optics in engineering education: stimulating the interest of first-year students

NASA Astrophysics Data System (ADS)

Blanco-García, Jesús; Vazquez-Dorrío, Benito

2014-07-01

The work here presented deals with stimulating the interest for optics in first-year students of an Engineering School, which are not specifically following Optical Engineering studies. Optic-based technologies are nowadays wide spread, and growing, in almost all the engineering fields (from non destructive testing or alignments to power laser applications, fiber optic communications, memory devices, etc.). In general, the first year curriculum doesn't allow a detailed review of the main light properties, least its technical applications. We present in this paper our experience in showing some basic optic concepts and related technologies to the students of our school. Based on the fact that they have a very basic training in this branch of physics, we have designed a series of experimental demonstrations with the dual purpose of making them understand the basic principles of these technologies, and to know the potential of applications to engineering they offer. We assembled these experiments in the laboratory and invited students to pass to get to know them, giving them an explanation in which we focused on the possible range of application of each technique. The response was very good, not only by the number of students who attended the invitation but also by the interest demonstrated by their questions and opinions.

Foreign Language Learning: Strategies in the Context of STEM Education (Estrategias de Aprendizaje de Lenguas Extranjeras en el Contexto de la Educación STEM)

ERIC Educational Resources Information Center

Han, Turgay

2015-01-01

This study aims at providing an insightful evaluation of the EFL strategies used by first-year STEM (science, technology, engineering, and mathematics) students, and their perceptions of their own use of strategies. The 147 participants were undergraduate level, first-year engineering students at a state university in Turkey. Their ages ranged…

Enhancing the Programming Experience for First-Year Engineering Students through Hands-On Integrated Computer Experiences

ERIC Educational Resources Information Center

Canfield, Stephen L.; Ghafoor, Sheikh; Abdelrahman, Mohamed

2012-01-01

This paper describes the redesign and implementation of the course, "Introduction to Programming for Engineers" using microcontroller (MCU) hardware as the programming target. The objective of this effort is to improve the programming competency for engineering students by more closely relating the initial programming experience to the student's…

Use of Concept Maps as an Assessment Tool in Mechanical Engineering Education

ERIC Educational Resources Information Center

Tembe, B. L.; Kamble, S. K.

2013-01-01

The purpose of this study to investigate, how third year mechanical engineering students are able to use their knowledge of concept maps in their study of the topic of "Introduction to the Internal Combustion Engines (IICE)". 41 students participated in this study. Firstly, the students were taught about concept maps and then asked to…

Comparing Freshman and Doctoral Engineering Students in Design: Mapping with a Descriptive Framework

ERIC Educational Resources Information Center

Carmona Marques, P.

2017-01-01

This paper reports the results of a study of engineering students' approaches to an open-ended design problem. To carry out this, sketches and interviews were collected from 9 freshmen (first year) and 10 doctoral engineering students, when they designed solutions for orange squeezers. Sketches and interviews were analysed and mapped with a…

Analyzing the Effect of Technology-Based Intervention in Language Laboratory to Improve Listening Skills of First Year Engineering Students (El uso de la tecnología en el laboratorio de idiomas para el mejoramiento de las habilidades de escucha de estudiantes de ingeniería de primer año)

ERIC Educational Resources Information Center

Pasupathi, Madhumathi

2013-01-01

First year students pursuing engineering education face problems with their listening skills. Most of the Indian schools use a bilingual method for teaching subjects from primary school through high school. Nonetheless, students entering university education develop anxiety in listening to classroom lectures in English. This article reports an…

Creating meaningful learning experiences: Understanding students' perspectives of engineering design

NASA Astrophysics Data System (ADS)

Aleong, Richard James Chung Mun

There is a societal need for design education to prepare holistic engineers with the knowledge, skills, and attitudes to innovate and compete globally. Design skills are paramount to the espoused values of higher education, as institutions of higher learning strive to develop in students the cognitive abilities of critical thinking, problem solving, and creativity. To meet these interests from industry and academia, it is important to advance the teaching and learning of engineering design. This research aims to understand how engineering students learn and think about design, as a way for engineering educators to optimize instructional practice and curriculum development. Qualitative research methodology was used to investigate the meaning that engineering students' ascribe to engineering design. The recruitment of participants and corresponding collection of data occurred in two phases using two different data collection techniques. The first phase involved the distribution of a one-time online questionnaire to all first year, third year, and fourth year undergraduate engineering students at three Canadian Universities. After the questionnaire, students were asked if they would be willing to participate in the second phase of data collection consisting of a personal interview. A total of ten students participated in interviews. Qualitative data analysis procedures were conducted on students' responses from the questionnaire and interviews. The data analysis process consisted of two phases: a descriptive phase to code and categorize the data, followed by an interpretative phase to generate further meaning and relationships. The research findings present a conceptual understanding of students' descriptions about engineering design, structured within two educational orientations: a learning studies orientation and a curriculum studies orientation. The learning studies orientation captured three themes of students' understanding of engineering design: awareness, relevance, and transfer. With this framework of student learning, engineering educators can enhance learning experiences by engaging all three levels of students' understanding. The curriculum studies orientation applied the three holistic elements of curriculum---subject matter, society, and the individual---to conceptualize design considerations for engineering curriculum and teaching practice. This research supports the characterization of students' learning experiences to help educators and students optimize their teaching and learning of design education.

Integrating Library Instruction into the Course Management System for a First-Year Engineering Class: An Evidence-Based Study Measuring the Effectiveness of Blended Learning on Students' Information Literacy Levels

ERIC Educational Resources Information Center

Zhang, Qinqin; Goodman, Maren; Xie, Shiyi

2015-01-01

This research examines students in a first-year engineering course who receive library instruction by using a newly developed online module and attending optional in-person tutorials. It aims to evaluate the outcomes of library information literacy instruction using this module combined with in-person help. Results show a significant improvement…

Effects of a Problem-Based Learning Program on Engineering Students' Academic Achievements, Skills Development and Attitudes in a Mexican University.

ERIC Educational Resources Information Center

Polanco, Rodrigo; Calderon, Patricia; Delgado, Franciso

A 3-year follow-up evaluation was conducted of an experimental problem-based learning (PBL) integrated curriculum directed to students of the first 2 years of engineering. The PBL curriculum brought together the contents of physics, mathematics, and computer science courses in a single course in which students worked on real-life problems. In…

High School Graphics Experience Influencing the Self-Efficacy of First-Year Engineering Students in an Introductory Engineering Graphics Course

ERIC Educational Resources Information Center

Metraglia, Riccardo; Villa, Valerio; Baronio, Gabriele; Adamini, Riccardo

2015-01-01

Today's students enter engineering colleges with different technical backgrounds and prior graphics experience. This may due to their high school of provenience, which can be technical or non-technical. The prior experience affects students' ability in learning and hence their motivation and self-efficacy beliefs. This study intended to evaluate…

Improving the Retention of First Year Students

NASA Astrophysics Data System (ADS)

Bishop, Graham

The thesis compares student attrition rates in two UWS Schools for 2004 and 2005. It analyses possible reasons why students discontinue and identifies strategies and approaches to improving the quality of the teaching and learning environment for these students. The thesis focuses on the retention of first year students in the School of Engineering at the University of Western Sydney. Low retention rates are costly to the university, leading to inefficient use of resources, failure to fulfil student aspirations, and intervention between the university and the student. In each chapter, the thesis addresses student retention, satisfaction and performance and the interrelation between them and outlines the measures taken by the School of Engineering to improve these measurements for students commencing in 2006 and proposes many recommendations for further improvements in subsequent years. Each chapter addresses these issues by following the student pathway, commencing with the student leaving High School and entering their chosen university and course of study. At each stage, the relevant issues are addressed which have a direct or indirect impact on student retention, satisfaction and performance. Use is made of reports and papers published by universities and organisations, as outlined in the Literature Review. The research questions provide data through the results obtained from surveys. Typical Retention Rates are 75% for UWS, 81% for the Sector, 76% for the New Generation Universities (NGUs) and 62% for the School of Engineering on which this research is focussed. This thesis confirms the research from many countries that closely links student retention with the quality of teaching and learning. Key issues are: • a sound first year student orientation and welcome by staff; encountering efficient, effective and accurate student. The introduction of a more effective and tailored orientation program in 2007 attracted, at UWS School of Engineering, 92% attendance and greater awareness by the students of their study program and the available support services; • having student queries responded to promptly and effectively; The introduction of a First Year Coordinator in 2007 proved to be well received, with a significant number of students having prompt responses to their queries, as compared with previous years; clear expectations management about services and key academic issues like assessment; the marketing of UWS Engineering programs was addressed in 2006 and 2007, with an expansion of the marketing program operated for feeder schools and improved awareness of student expectations prior to entry: an ongoing exercise; having committed, accessible, responsive and capable teaching staff; the accessibility and responsiveness of teaching staff to first year student issues, as outlined in this thesis, is being addressed in 2007; receiving prompt and helpful feedback on their learning; an issue being addressed by the First Year Teaching Team as an essential element of the teaching and learning process; together with: effective use of an appropriate selection from a myriad of learning strategies and resources which give emphasis to active learning, practice oriented learning, peer supported learning and self-managed learning; supported by a reliable infrastructure and support systems; and consistently encountering staff that are responsive and committed to giving service to student support. (Abstract shortened by ProQuest.).

Engineering Gender--Gendering Engineering: What About Women in Nerd-Dom?

ERIC Educational Resources Information Center

Tonso, Karen L.

This paper examines the kinds of persons that engineering education produces, focusing on cultural identities related to gender issues. It is based on survey questionnaires, interviews, and observations of 274 first-year and fourth-year engineering students at a state university known for its concern about the education of women engineers. The…

A Ten Year Assessment of the Pre-Engineering Program for Under-Represented, Low Income and/or First Generation College Students at the University of Akron

ERIC Educational Resources Information Center

Lam, Paul C.; Srivatsan, Tirumalai; Doverspike, Dennis; Vesalo, John; Mawasha, P. Ruby

2005-01-01

This paper summarizes the findings of a ten year study on a Pre-Engineering program aimed at dramatically improving both the recruitment and retention of under-represented students pursuing careers in Science, Technology, Engineering and Mathematics (STEM) at The University of Akron. The primary goal of this study was to evaluate The University of…

Evaluating Risk Awareness in Undergraduate Students Studying Mechanical Engineering

ERIC Educational Resources Information Center

Langdon, G. S.; Balchin, K.; Mufamadi, P.

2010-01-01

This paper examines the development of risk awareness among undergraduate students studying mechanical engineering at a South African university. A questionnaire developed at the University of Liverpool was modified and used on students from the first, second and third year cohorts to assess their awareness in the areas of professional…

Comparative Study of the academic performance between different curricula in Agricultural Engineering

NASA Astrophysics Data System (ADS)

Vazquez, J. L.; Serrano, A.; Caniego, J.

2012-04-01

Due to the introduction of new degrees on the College of Agricultural Engineering of the Technical University of Madrid adapted to the European Space for Higher Education (Bologna), we have made a comparative study of academic achievement obtained by the students during their first year at the Centre according to different curricula. We used data from 2 curricula leading to the degree in Agricultural Engineering, Curriculumn 74 (6 years and annual structure) and Curriculum 96 modified in 2006 (5 years with quarterly structure) and the new curriculum in grades (4 years semi-structured). It has been used as a data source, the qualifications of new students during the last three years prior to the extinction of the curriculum.The study shows that current rates of academic success or failure and dropout during the first year of college are very similar to those happening 12 years ago, when it was assumed that the preparation of students from high school was much higher than today. Keywords: Academic performance, curricula, Bologna.

The Challenge of Induction! Introducing Engineering Students to Higher Education: A Task-Oriented Approach.

ERIC Educational Resources Information Center

Edward, Norrie; Middleton, June

2002-01-01

First-year engineering students at Robert Gordon University (Scotland) were presented with a task-oriented induction program. Students were divided into groups and assigned a facilitator, later personal tutor, to whom they could refer. Student reaction to the experience was very favorable. Effect on progression rates is yet to be determined. (AEF)

Choosing engineering: Can I succeed and do I want to? A qualitative analysis framed in expectancy-value theory

NASA Astrophysics Data System (ADS)

Matusovich, Holly Marie

Recently published reports call for an increase in the number of engineering graduates and suggest appropriate characteristics that these graduates should embody. Accomplishing either objective requires first understanding why students choose to pursue engineering degrees. This research started addressing this knowledge gap using Eccles' expectancy-value model to qualitatively and longitudinally examine undergraduate student's choices to enroll and persist in engineering majors. Specifically, this study focused on identity within Eccles' model to answer the question: How do students' beliefs about being engineers in the future shape their choices to pursue engineering? Framed in Eccles' model, students' choices to pursue engineering majors are based on beliefs about their engineering-related competence and how much they value succeeding in an engineering major. Eccles posits that identity shapes both competence and value beliefs. This study defined identity as students' self-perceptions as future engineers then examined the roles these self-perceptions in shaping their choices to pursue engineering degrees. Gee's conception of four-interrelated aspects of identity (nature identity, institutional identity, affinity identity, and discourse identity) provided a lens to examine students' self-perceptions as future engineers. Multiple case study methods guided this research with each of ten students (five men and five women) representing a case. Results derive from the inductive analysis of longitudinal interviews triangulated with survey results---all data spanned the students' first through fourth undergraduate years. This study is part of a larger body of work, the Academic Pathways Study (APS), conducted by the Center for Advancement of Engineering Education (CAEE). Results demonstrated that students' self-perceptions as future engineers are connected to both competence and value beliefs and to the choice to persist in engineering. Specifically, the results showed: (1) even in their fourth undergraduate year, three out of ten participants were uncertain about themselves as future engineers; (2) students choosing to pursue an engineering degree because they identify with the types of activities in which engineers engage experience the persistence choice process differently than students who choose engineering for other reasons; and (3) all students ultimately had positive competence beliefs, although two women participants continually renegotiated definitions of competence in engineering.

"They [The Lecturers] Have to Get through a Certain Amount in an Hour": First Year Students' Problems with Service Mathematics Lectures

ERIC Educational Resources Information Center

Harris, Diane; Pampaka, Maria

2016-01-01

Drawing on large-scale survey data and interviews with students during their first year at university, and case studies in their institutions, we explore the problems faced by students taking mathematically demanding courses, e.g. physics and engineering. These students are often taught mathematics as a service subject by lecturers of mathematics.…

Retaining minorities in engineering: Assessment of a program prototype

NASA Astrophysics Data System (ADS)

Good, Jennifer Marie (Phillips)

Program assessment is an essential part of healthy program development. Assessment should include multiple considerations, dimensions, and outcomes that match the program's objectives. As a newly formed retention program, the Auburn University Minority Engineering Program, designed to help pre-engineering minority students make the transition into their freshman year of university studies, incorporated evaluation and assessment into all three components of the program (the interactive learning laboratory, critical-thinking workshops, and Sunday-evening tutorials) from the program's inception. If students successfully adapted to the university environment and the demands of the pre-engineering course of study, then retention of minority students in the College of Engineering should improve. Data were gathered on the students involved in the various program components. Students who entered the Minority Engineering Program were pre- and posttested on three standardized subtests (critical thinking, mathematics, and science reasoning) of the Collegiate Assessment of Academic Proficiency. The first-quarter grade-point averages of the students were also gathered to compare their grades to freshman students in previous quarters within the College of Engineering. Qualitative data were also gathered on this same group of students. An analysis of the data revealed that student achievement is affected by involvement in the Minority Engineering Program. Specifically, the first quarter grade point averages of students involved in the program exceeded those of their peers in earlier years of study prior to the program's existence. In addition, mathematics and science reasoning scores on standardized tests increased pre- to postintervention. Comments collected in journals and files also demonstrated use of critical-thinking and problem-solving skills employed by the students. Recommendations for alterations of the program were made based on the outcome of the program evaluation. Further suggestions for research in minority engineering program development and evaluation were also discussed.

A democratic and student-centred approach to facilitating teamwork learning among first-year engineering students: a learning and teaching case study

NASA Astrophysics Data System (ADS)

Missingham, Dorothy; Matthews, Robert

2014-07-01

This work examines an innovative and evolving approach to facilitating teamwork learning in a generic first-year mechanical engineering course. Principles of inclusive, student-active and democratic pedagogy were utilised to engage students on both the social and personal planes. Learner opportunities to facilitate, direct and lead the learning direction were emphasised. This emphasis encouraged a rich learning process and motivated students dismissive of the need to examine their communication skills and those who initially perceived the topic as a personal intrusion. Through a sharing of curriculum decisions, a climate of trust, ownership and shared value arose. Students chose from a range of tools across personality-type indicators, learning style indicators and hierarchies of human needs, to assist their capacity to express and discuss engineering designs and concepts. Peer teaching and collaborative exercises were incorporated to provide an authentic learning context and to further the student's sense of ownership.

Race, class and gender in engineering education: A quantitative investigation of first year enrollment

NASA Astrophysics Data System (ADS)

Phillips, Canek Moises Luna

Research explanations for the disparity across both race and gender in engineering education has typically relied on a deficit model, whereby women and people of color lack the requisite knowledge or psychological characteristics that Whites and men have to become engineers in sufficient numbers. Instead of using a deficit model approach to explain gender and race disparity, in the three studies conducted for this dissertation, I approach gender and race disparity as the result of processes of segregation linked to the historic and on-going perpetuation of systemic sources of oppression in the United States. In the first study, I investigate the relationship between the odds ratios of women and men enrolled in first year US engineering programs and institutional characteristics. To do this, I employ linear regression to study data from the American Society of Engineering Education (ASEE) and the National Center for Education Statistics (NCES) to quantify relationships between odds ratios and institutional characteristics. Results of the linear regression models showed significant relationships between the cost of universities and university selectivity and the odds ratios of women choosing engineering. I theorize how the results could be related to the operation of occupational segregation in engineering, particularly how class-based markers have been historically used by women to overcome gender-based segregation in engineering. In the second study, I examine longitudinal patterns of race, gender, and intersectional combinations of race and gender in enrollments of students in first year engineering programs across the United States (US). Using enrollment data from the American Society of Engineering Education and California Post-Secondary Education Commission, I construct measures of segregation to study how trends in the disparity of students by race could be related to increases in public school segregation nationally over the past 25 years. I found that as public school segregation levels increased nationally, underrepresentation of Black and Hispanics and overrepresentation of White and Asian students has moved further toward the extremes in first year engineering programs compared to these groups’ shares of high school enrollment. I conclude that the study of public school segregation and its effect on racial disparity needs greater attention, as well as that the investigation I conducted serves as a beginning towards pushing back on deficit model explanations of race and gender disparity in engineering. In the third study, I return to the investigation of odds ratios and institutional characteristics, constructing odds ratios using ASEE and NCES data based on the odds of enrollment in first year engineering programs between Asian, Black, and Hispanic students compared to White students. I again quantify the relationships between odds ratios and institutional characteristics using linear regression models and discuss results using theory based in the perspective of occupational segregation. In this case, results were inconclusive leading me to conclude that other variables that I did not consider, such as the segregation levels of schools that students come from before enrollment, should be considered as I develop my own future study into the topic.

A Study of Engineering Freshmen Regarding Nanotechnology Understanding

ERIC Educational Resources Information Center

Lu, Kathy

2009-01-01

This study was conducted under the grand scheme of nanotechnology education and was focused on examining the nanotechnology readiness of first-year engineering students. The study found that most students learned the term "nano" from popular science magazines or as a measurement unit; less than 5% of the students learned "nano" through…

Engineering Students' Experiences of Interactive Teaching in Calculus

ERIC Educational Resources Information Center

Weurlander, Maria; Cronhjort, Mikael; Filipsson, Lars

2017-01-01

This study reports on an educational development initiative where peer instruction was used instead of traditional lectures in a calculus course for first-year engineering students. The aim of the study was to explore students' experiences of this method. Data were collected by means of an open-ended questionnaire on two occasions: early and late…

Examining the relationship of ethnicity, gender and social cognitive factors with the academic achievement of first-year engineering students

NASA Astrophysics Data System (ADS)

Carr, Bruce Henry

The purpose of the study was to examine the relationships of social cognitive factors and their influence on the academic performance of first-year engineering students. The nine social cognitive variables identified were under the groupings of personal support, occupational self-efficacy, academic self-efficacy, vocational interests, coping, encouragement, discouragement, outcome expectations, and perceived stress. The primary student participants in this study were first-year engineering students from underrepresented groups which include African American, Hispanic American students and women. With this in mind, the researcher sought to examine the interactive influence of race/ethnicity and gender based on the aforementioned social cognitive factors. Differences in academic performance (university GPA of first-year undergraduate engineering students) were analyzed by ethnicity and gender. There was a main effect for ethnicity only. Gender was found not to be significant. Hispanics were not found to be significantly different in their GPAs than Whites but Blacks were found to have lower GPAs than Whites. Also, Pearson correlation coefficients were used to examine the relationship between and among the nine identified social cognitive variables. The data from the analysis uncovered ten significant correlations which were as follows: occupational self-efficacy and academic self-efficacy, occupational self-efficacy and vocational interest, occupational self-efficacy and perceived stress, academic self-efficacy and encouragement, academic self-efficacy and outcome expectations, academic self-efficacy and perceived stress, vocational interest and outcome expectations, discouragement and encouragement, coping and perceived stress, outcome expectations and perceived stress. Next, a Pearson correlation coefficient was utilized to examine the relationship between academic performance (college GPA) of first-year undergraduate engineering students and the nine identified social cognitive variables. The data analysis revealed three significant correlations which were as follows academic performance and occupational self-efficacy, academic performance and academic self-efficacy, and academic performance and encouragement. Finally, a Pearson correlation coefficient was used to examine the relationship between high school GPA and the nine identified social cognitive variables. The Pearson correlational coefficient indicated that there was one statistically significant correlation which was high school GPA and academic self-efficacy. Recommendations for further study included (a) future research involving investigations that compare a variety of institutions in different regions of the country; (b) further investigations utilizing open-ended responses from engineering students based on interviews; (c) a replicated study in 5 to 10 years to evaluate whether differences emerged relating to ethnicity and gender due to possible societal or cultural changes; and (d) a study involving a pretest and posttest of students' self-efficacy beliefs. Finally, the researcher recommends a qualitative study specifically involving interview questions aimed at students with moderate level grades and SAT scores who exhibited above average academic performance. (Abstract shortened by UMI.).

Approaches to Studying in First-Year Engineering: Comparison between Inventory Scores and Students' Descriptions of Their Approaches through Interviews

ERIC Educational Resources Information Center

Pettersson, Kerstin; Svedin, Maria; Scheja, Max; Bälter, Olle

2018-01-01

This combined interview and survey study explored the relationship between interview data and data from an inventory describing engineering students' ratings of their approaches to studying. Using the 18-item Approaches and Study Skills Inventory for Students (ASSIST) students were asked to rate their approaches to studying in relation to…

Chemical Information in Scirus and BASE (Bielefeld Academic Search Engine)

ERIC Educational Resources Information Center

Bendig, Regina B.

2009-01-01

The author sought to determine to what extent the two search engines, Scirus and BASE (Bielefeld Academic Search Engines), would be useful to first-year university students as the first point of searching for chemical information. Five topics were searched and the first ten records of each search result were evaluated with regard to the type of…

Students' Perceptions of the Relevance of Mathematics in Engineering

ERIC Educational Resources Information Center

Flegg, Jennifer; Mallet, Dann; Lupton, Mandy

2012-01-01

In this article, we report on the findings of an exploratory study into the experience of students as they learn first year engineering mathematics. Here we define engineering as the application of mathematics and sciences to the building and design of projects for the use of society [M. Kirschenman and B. Brenner, "Education for Civil…

Engineering Outreach through College Pre-Orientation Programs: MIT Discover Engineering

ERIC Educational Resources Information Center

Thompson, Mary Kathryn; Consi, Thomas R.

2007-01-01

Freshmen Pre-Orientation Programs (FPOPs) can be powerful outreach tools for incoming college students and provide an exciting introduction to the field of engineering. The benefits reach not only the first year students, but also the upperclassmen who help to run the programs and the departments that sponsor them. A family of three engineering…

Engineering Habits of Mind… for Better or Worse?

ERIC Educational Resources Information Center

Hodgson, Dan; Cloran, Peter; Johnson, Rory

2017-01-01

Engineering Habits of Mind (EHoMs) were first introduced to a target group of Year 9 (age 14) students who the authors felt were disengaged with science, technology, and computing. These students were invited to take part in an engineering challenge with a school in Qatar. This involved making a bridge and rolling a marble over the bridge. The…

Characterizing learning-through-service students in engineering by gender and academic year

NASA Astrophysics Data System (ADS)

Carberry, Adam Robert

Service is increasingly being viewed as an integral part of education nationwide. Service-based courses and programs are growing in popularity as opportunities for students to learn and experience their discipline. Widespread adoption of learning-through-service (LTS) in engineering is stymied by a lack of a body of rigorous research supporting the effectiveness of these experiences. In this study, I examine learning-through-service through a nationwide survey of engineering undergraduate and graduate students participating in a variety of LTS experiences. Students (N = 322) participating in some form of service -- service-learning courses or extra-curricular service programs -- from eighty-seven different institutions across the United States completed a survey measuring demographic information (institution, gender, academic year, age, major, and grade point average), self-perceived sources of learning (service and traditional coursework), engineering epistemological beliefs, personality traits, and self-concepts (self-efficacy, motivation, expectancy, and anxiety) toward engineering design. Responses to the survey were used to characterize engineering LTS students and identify differences in these variables in terms of gender and academic year. The overall findings were that LTS students perceived their service experience to be a beneficial source for learning professional skills and, to a lesser degree, technical skills, held moderately sophisticated engineering epistemological beliefs, and were generally outgoing, compassionate, and adventurous. Self-perceived sources of learning, epistemological beliefs, and personality traits were shown to be poor predictors of student engineering achievement. Self-efficacy, motivation, and outcome expectancy toward engineering design were generally high for all LTS students; most possessed rather low anxiety levels toward engineering design. These trends were generally consistent between genders and across the five academic years (first-year, sophomores, juniors, seniors, and graduate students) surveyed. Females had significantly more sophisticated epistemological beliefs, greater perceptions of service as a source of learning professional and technical skills, and higher anxiety toward engineering design. They also were significantly more extroverted and agreeable. Males had higher confidence, motivation, and expectancy for success toward engineering design. Across academic year it was seen that students varied in their engineering design self-concepts, except for motivation.

The Effects of Spatial Visualization Skill Training on Gender and Retention in Engineering.

ERIC Educational Resources Information Center

Devon, Richard; Engel, Renata; Turner, Geoffrey

1998-01-01

Engineering students were given a mental rotation test at the beginning and end of their first-year engineering course and again several years later to assess the relationship between spatial visualization skill and retention in engineering. No relationship was found between task scores and retention; however, a course in design and graphics…

Examining the Impact of the Engineering Successful/Unsuccessful Grading (SUG) Program on Student Retention

ERIC Educational Resources Information Center

Novak, Heather; Paguyo, Christina; Siller, Thomas

2016-01-01

In this study, we analyzed the Successful/Unsuccessful Grading (SUG) program, an intervention that was founded at a large public university to support students during their transition into the first year of undergraduate engineering (EG) coursework. To understand how the SUG program impacts student retention of EG majors, we conducted an analysis…

Social Identities among Engineering Students and through Their Transition to Work: A Longitudinal Study

ERIC Educational Resources Information Center

Jungert, Tomas

2013-01-01

This article draws on a longitudinal and qualitative study of students in a master's program in engineering. Interpretative phenomenological analysis was used to analyze annual, semi-structured interviews with ten students, from the first semester until one year after graduation. The program enjoys a high status and has a reputation of being…

Contextual Shaping of Student Design Practices: The Role of Constraint in First-Year Engineering Design

NASA Astrophysics Data System (ADS)

Goncher, Andrea M.

thResearch on engineering design is a core area of concern within engineering education, and a fundamental understanding of how engineering students approach and undertake design is necessary in order to develop effective design models and pedagogies. This dissertation contributes to scholarship on engineering design by addressing a critical, but as yet underexplored, problem: how does the context in which students design shape their design practices? Using a qualitative study comprising of video data of design sessions, focus group interviews with students, and archives of their design work, this research explored how design decisions and actions are shaped by context, specifically the context of higher education. To develop a theoretical explanation for observed behavior, this study used the nested structuration. framework proposed by Perlow, Gittell, & Katz (2004). This framework explicated how teamwork is shaped by mutually reinforcing relationships at the individual, organizational, and institutional levels. I appropriated this framework to look specifically at how engineering students working on a course-related design project identify constraints that guide their design and how these constraints emerge as students interact while working on the project. I first identified and characterized the parameters associated with the design project from the student perspective and then, through multi-case studies of four design teams, I looked at the role these parameters play in student design practices. This qualitative investigation of first-year engineering student design teams revealed mutual and interconnected relationships between students and the organizations and institutions that they are a part of. In addition to contributing to research on engineering design, this work provides guidelines and practices to help design educators develop more effective design projects by incorporating constraints that enable effective design and learning. Moreover, I found that when appropriated in the context of higher education, multiple sublevels existed within nested structuration's organizational context and included course-level and project-level factors. The implications of this research can be used to improve the design of engineering course projects as well as the design of research efforts related to design in engineering education.

A Case Study of a College-Wide First-Year Undergraduate Engineering Course

ERIC Educational Resources Information Center

Aloul, Fadi; Zualkernan, Imran; Husseini, Ghaleb; El-Hag, Ayman; Al-Assaf, Yousef

2015-01-01

Introductory engineering courses are either programme specific or expose students to engineering as a broad discipline by including materials from various engineering programmes. A common introductory engineering course that spans different engineering programmes raises challenges, including the high cost of resources as well as the lack of…

A Methodology for Improving Active Learning Engineering Courses with a Large Number of Students and Teachers through Feedback Gathering and Iterative Refinement

ERIC Educational Resources Information Center

Estévez-Ayres, Iria; Alario-Hoyos, Carlos; Pérez-Sanagustín, Mar; Pardo, Abelardo; Crespo-García, Raquel M.; Leony, Derick; Parada G., Hugo A.; Delgado-Kloos, Carlos

2015-01-01

In the last decade, engineering education has evolved in many ways to meet society demands. Universities offer more flexible curricula and put a lot of effort on the acquisition of professional engineering skills by the students. In many universities, the courses in the first years of different engineering degrees share program and objectives,…

Mitigating the Mathematical Knowledge Gap between High School and First Year University Chemical Engineering Mathematics Course

ERIC Educational Resources Information Center

Basitere, Moses; Ivala, Eunice

2015-01-01

This paper reports on a study carried out at a University of Technology, South Africa, aimed at identifying the existence of the mathematical knowledge gap and evaluating the intervention designed to bridge the knowledge gap amongst students studying first year mathematics at the Chemical Engineering Extended Curriculum Program (ECP). In this…

Persistence Factors Associated with First-Year Engineering Technology Learners

ERIC Educational Resources Information Center

Christe, Barbara

2015-01-01

Engineering technology learners are understudied group that comprise the "T" of the science, technology, engineering, and mathematics disciplines. Attrition from engineering technology majors is a profound and complex challenge, as substantially less than half of students who begin an engineering technology major persist through the…

Food, Environment, Engineering and Life Sciences Program (Invited)

NASA Astrophysics Data System (ADS)

Mohtar, R. H.; Whittaker, A.; Amar, N.; Burgess, W.

2009-12-01

Food, Environment, Engineering and Life Sciences Program Nadia Amar, Wiella Burgess, Rabi H. Mohtar, and Dale Whitaker Purdue University Correspondence: mohtar@purdue.edu FEELS, the Food, Environment, Engineering and Life Sciences Program is a grant of the National Science Foundation for the College of Agriculture at Purdue University. FEELS’ mission is to recruit, retain, and prepare high-achieving students with financial difficulties to pursue STEM (Science, Technology, Engineering, and Mathematics) careers. FEELS achieves its goals offering a scholarship of up to 10,000 per student each year, academic, research and industrial mentors, seminars, study tables, social and cultural activities, study abroad and community service projects. In year one, nine low-income, first generation and/or ethnic minority students joined the FEELS program. All 9 FEELS fellows were retained in Purdue’s College of Agriculture (100%) with 7 of 9 (77.7%) continuing to pursue STEM majors. FEELS fellows achieved an average GPA in their first year of 3.05, compared to the average GPA of 2.54 for low-income non- FEELS students in the College of Agriculture. A new cohort of 10 students joined the program in August 2009. FEELS fellows received total scholarships of nearly 50,000 for the 2008-2009 academic year. These scholarships were combined with a holistic program that included the following key elements: FEELS Freshman Seminars I and II, 2 study tables per week, integration activities and frequent meetings with FEELS academic mentors and directors. Formative assessments of all FEELS activities were used to enhance the first year curriculum for the second cohort. Cohort 1 will continue into their second year where the focus will be on undergraduate research. More on FEELS programs and activities: www.purdue.edu/feels.

A study of engineering student attributes and time to completion of first-year required courses at Texas A&M University

NASA Astrophysics Data System (ADS)

Kimball, Jorja Lay

For many years, colleges of engineering across the nation have required that a foundational set of courses be completed for entry into upper division coursework or into a specific engineering major. Since 1998, The Dwight Look College of Engineering at Texas A&M University (TAMU) has required that incoming first-time enrolling students complete a Core Body of Knowledge (CBK) with specific cumulative grade points required for specific majors. However, considerations of the time to completion of coursework and other student characteristics and academic factors have not been taken into consideration by TAMU, like most institutions. The purpose of this study is to determine for first year engineering students at TAMU the relationship of gender, ethnicity, engineering major, unmet financial need, cumulative grade point average, and total transfer hours on time to completion of CBK courses. The results of the analysis showed that cumulative grade point average (CGPA) had the strongest relationship to completion of CBK of any independent variable in this study. Statistical significance was found for the following variables in this study: CGPA, gender, ethnicity, and unmet financial need. For the study's variable of major, statistical significance was found for Chemical, Electrical, and Computer Engineering majors. The one variable in this study that did not show statistical significance in relation to time to completion of CBK was transfer credit. Findings with implications for recruitment and retention of underrepresented in engineering is a statistical significance indicating that on average females are taking less time than males to complete CBK. The conclusion from the study is that efforts to attract more women into engineering have merit as do programs to support underrepresented students in order that they may complete CBK at a faster pace. Further study to determine profiles of those majors where statistical significance was found for students taking a greater or lesser amount of time for CBK completion than the mean is recommended, as is ongoing data collection and comparison for current cohorts of engineering majors at TAMU.

Student attraction to engineering through flexibility and breadth in the curriculum

NASA Astrophysics Data System (ADS)

Alpay, E.

2013-03-01

Several European universities provide entry to general engineering studies prior to degree specialisation. The potential advantages of such entry include the provision of a broader foundation in engineering fundamentals, the option for students to defer specialisation until a greater awareness of the different engineering disciplines and the preparation of students for a more versatile career. In this paper, the attractiveness of general engineering (specifically in the first year of study) is explored through a national (UK) survey on pre-university students. Attention is given to gauging student enthusiasm for flexibility in engineering specialisation, combined degree options and exposure to other non-technical courses. The findings indicate that a general engineering programme is highly attractive to students who are currently considering an engineering degree. The programme is also attractive to some students who had previously not considered engineering. For both sets of students, the desire for education on broader topics is indicated, specifically in areas of leadership, teamwork and business skills, and more generally self-awareness and personal development.

A Course in... Biochemical Engineering.

ERIC Educational Resources Information Center

Ng, Terry K-L.; And Others

1988-01-01

Describes a chemical engineering course for senior undergraduates and first year graduate students in biochemical engineering. Discusses five experiments used in the course: aseptic techniques, dissolved oxygen measurement, oxygen uptake by yeast, continuous sterilization, and cultivation of microorganisms. (MVL)

Global Environmental Priorities of Engineering Students in Krakow Poland.

ERIC Educational Resources Information Center

Robinson, Michael; Bowen, William M.

2000-01-01

Reports and interprets the rankings of Rodger Bybee's 12 global-environmental issues/threats by first and second year engineering students (n=175) at the Technical University of Krakow, Poland. Results indicate that personal experience with local environmental issues are the most important determinant for ranking global environmental threats.…

Pressure for Fun: A Course Module for Increasing Chemical Engineering Students' Excitement and Interest in Mechanical Parts

ERIC Educational Resources Information Center

Scarbrough, Will J.; Case, Jennifer M.

2006-01-01

A new module in a first year mechanical drawing course was designed with the primary goal of exciting chemical engineering students about mechanical things. Other goals included increasing student ability and confidence to explain how things work. A variety of high intensity, hands-on, facilitated group activities using pumps and valves were…

Improvements to an Electrical Engineering Skill Audit Exam to Improve Student Mastery of Core EE Concepts

ERIC Educational Resources Information Center

Parent, D. W.

2011-01-01

The San Jose State University Electrical Engineering (EE) Department implemented a skill audit exam for graduating seniors in 1999 with the purpose of assessing the teaching and the students' mastery of core concepts in EE. However, consistent low scores for the first years in which the test was administered suggested that students had little…

Core skills assessment to improve mathematical competency

NASA Astrophysics Data System (ADS)

Carr, Michael; Bowe, Brian; Fhloinn, Eabhnat Ní

2013-12-01

Many engineering undergraduates begin third-level education with significant deficiencies in their core mathematical skills. Every year, in the Dublin Institute of Technology, a diagnostic test is given to incoming first-year students, consistently revealing problems in basic mathematics. It is difficult to motivate students to address these problems; instead, they struggle through their degree, carrying a serious handicap of poor core mathematical skills, as confirmed by exploratory testing of final year students. In order to improve these skills, a pilot project was set up in which a 'module' in core mathematics was developed. The course material was basic, but 90% or higher was required to pass. Students were allowed to repeat this module throughout the year by completing an automated examination on WebCT populated by a question bank. Subsequent to the success of this pilot with third-year mechanical engineering students, the project was extended to five different engineering programmes, across three different year-groups. Full results and analysis of this project are presented, including responses to interviews carried out with a selection of the students involved.

Engineering students at typically invisible transition points: A focus on admissions and the sophomore year

NASA Astrophysics Data System (ADS)

Holloway, Elizabeth M.

As of 2012, women are approximately 19% of all engineering undergraduate students nationally (American Society for Engineering Education, 2012). Women's representation in engineering has not changed significantly over the last 20 years, despite increased attention, increased funding, and increased programmatic activities intended to encourage more women to become engineers. Research around the world continues to seek identification of the reasons for the underrepresentation of women in engineering. This prior work has focused primarily on two broad areas: recruiting, that is, preparation, socialization, exposure, and experiences prior to college; and retention, that is, experiences in higher education. Retention studies and programmatic responses to those studies mostly have been confined to the collegiate first year, a time of historically high attrition. Little attention has been paid to the university admissions process, one of the gateways to engineering studies. Little attention also has been paid to the experiences of college sophomores, whose attrition rates approach those of first-year college students. The first section of this dissertation presents a statistical analysis that indicated a bias in favor of men in the admission process. Success factor modeling suggested a different set of admission criteria could mitigate this bias. After recommendations to change admission criteria were implemented, the percent of female enrollment in engineering increased and statistical analysis confirmed that bias was substantially neutralized. The second section of this dissertation presents three frameworks for understanding how sophomores may be defined. The processes of conceptualizing and operationalizing what it means to be a sophomore impact the types of issues that can be investigated about student attrition, the findings that result from those investigations, and the ability to make cross institutional or programmatic comparisons using a clearly stated definition. Three definitions for classifying a sophomore--cohort, credits, and curriculum--are presented. The implications of each are discussed relative to the overall population but also specifically to women. All three retention methodologies were based on continued enrollment, with results disaggregated by gender. When analyzing retention data, the definition of a sophomore is an important choice as different definitions may or seem to provide different results. The cohort framework, for example, showed a higher percentage of students retained to their second year than to their third year. In contrast, a credit framework showed a higher percentage of students moving to a junior classification than to a sophomore classification. Because the literature review indicates that very little work has been done specifically on the sophomore engineer and most discussions about the sophomore year do not clearly state which sophomore framework is being applied to the research, this portion of the dissertation is a much needed step in clarifying the underlying bases whereby claims about retention are made. The third section of this dissertation is a study of sophomores' experiences in the engineering disciplines using the cohort definition of a sophomore. The cohort definition is used in this section to focus on the socio-cultural aspects of the second year in college. With a historical emphasis on and increasing positive results of increasing first-year retention, attention is now turning to the sophomore year. Understanding sophomore students' experiences in engineering may assist in developing strategies to reduce attrition and may assist in managing the culture in such a way that makes it more attractive to women and others who are underrepresented. The Sophomore Experiences Survey (Schreiner, 2010) was administered at one institution to the sophomore engineering cohort. Statistical comparisons of results between engineers and sophomores nationally showed more areas of similarity than differences, although the differences indicated that engineering sophomores were less engaged in their learning and less engaged with faculty and advisors. Sophomore engineering women were much more likely than men to be involved in engineering peer mentoring or leadership programs. Multiple regression analysis indicated that the most significant predictor of student satisfaction was satisfaction with peers on campus. The most significant predictor of intention to persist and intention to graduate was surety of major choice. However, there were differences in the most significant predictors when looking at men and women separately. Predictors of success outcomes for engineering sophomores point to the interconnectedness of experiences with faculty, advisors, and peers with individual student traits, characteristics, and preferences, with individual aspects acting as mediating and moderating factors. The overarching results of this research project offer frameworks through which change in the engineering education process can lead to greater participation by women in the engineering field, and increased retention rates for all engineering students.

Student Engagement in a Structured Problem-Based Approach to Learning: A First-Year Electronic Engineering Study Module on Heat Transfer

ERIC Educational Resources Information Center

Montero, E.; Gonzalez, M. J.

2009-01-01

Problem-based learning has been at the core of significant developments in engineering education in recent years. This term refers to any learning environment in which the problem drives the learning, because it is posed in such a way that students realize they need to acquire new knowledge before the problem can be solved. This paper presents the…

Evolving social responsibility understandings, motivations, and career goals of undergraduate students initially pursuing engineering degrees

NASA Astrophysics Data System (ADS)

Rulifson, Gregory A.

Engineers impact the lives of every person every day, and need to have a strong sense of social responsibility. Understanding what students think about social responsibility in engineering and their futures is very important. Further, by identifying influences that change these ideas and shape their conceptualizations, we can intervene to help prepare students for their responsibilities as part of the profession in the future. This thesis presents the experiences, in their own words, of 34 students who started in engineering. The study is composed of three parts: (i) engineering students' ideas about socially responsible engineering and what influenced these ideas, (ii) how students see themselves as future socially responsible engineers and how this idea changes over their first three years of college, and (iii) what social responsibility-related reasons students who leave engineering have for choosing a new major. Results show that students are complicated and have varied paths through and out of engineering studies. Students came up with their own ideas about socially responsible engineering that converged over the years on legal and safety related aspects of the profession. Relatedly, students identified with the engineering profession through internships and engineering courses, and rarely described socially responsible aspirations that could be accomplished with engineering. More often, those students who desired to help the disadvantaged through their engineering work left engineering. Their choice to leave was a combination of an unsupportive climate, disinterest in their classes, and a desire to combine their personal and professional social responsibility ambitions. If we want engineering students to push the engineering profession forward to be more socially responsible, we can identify the effective influences and develop a curriculum that encourages critical thinking about the social context and impacts of engineering. Additionally, a social responsibility-related curriculum could provide more opportunities for engagement that keeps those socially-motivated students in engineering. The engineering profession must also reflect these values to keep the new engineers working towards social responsibility and pushing the profession forward.

Increasing the Number of Canadian Indigenous Students in STEM at the University of Regina, Saskatchewan, Canada

NASA Astrophysics Data System (ADS)

St-Jacques, J. M.; McGee, S.; Janze, R.; Longman, M.; Pete, S.; Starblanket, N.

2016-12-01

Canadian Indigenous people are an extremely poorly represented group in STEM today due to major barriers in obtaining a high school and then a university education. Approximately 10% of the undergraduate student population out of a total 12,600 students at the University of Regina, Regina, Saskatchewan, is First Nations, Métis or Inuit. The university is located in a catchment region where 30% of the population is First Nations or Métis. Approximately 100 students majoring in the sciences, mathematics and engineering have self-declared themselves to be Indigenous. For the past two years, we have been running a pilot project, the Initiative to Support and Increase the Number of Indigenous Students in the Sciences, Mathematics and Engineering at the Aboriginal Student Centre, with financial support from the Deans of Science and Engineering. We provide student networking lunches, Indigenous scientist and engineer speakers and mentors and supplemental tutoring. Our program is actively supported and guided by Elder Noel Starblanket, former president of the National Indian Brotherhood (now the Assembly of First Nations). Our students are greatly interested in the health and environmental sciences (particularly water quality), with a sprinkling of physics, mathematics and engineering majors. Our students have gone on to graduate work with prestigious scholarships and a paid internship in engineering. We report here on various lessons learned: the involvement of elders is key, as is the acceptance of non-traditional academic paths, and any STEM support program must respect Indigenous culture. There is great interest in science and engineering on the part of these students, if scientists and engineers are willing to listen and learn to talk with these students on their own terms.

A case study of non-traditional students re-entry into college physics and engineering

NASA Astrophysics Data System (ADS)

Langton, Stewart Gordon

Two groups of students in introductory physics courses of an Access Program for engineering technologies were the subjects of this study. Students with a wide range of academic histories and abilities were enrolled in the program; many of the students were re-entry and academically unprepared for post-secondary education. Five years of historical data were evaluated to use as a benchmark for revised instruction. Data were gathered to describe the pre-course academic state of the students and their academic progress during two physics courses. Additional information was used to search for factors that might constrain academic success and as feedback for the instructional methods. The data were interpreted to regulate constructivist design features for the physics courses. The Engineering Technology Access Program was introduced to meet the demand from non-traditional students for admission to two-year engineering' technology programs, but who did not meet normal academic requirements. The duration of the Access Program was two terms for electronic and computer engineering students and three terms for civil and mechanical engineering students. The sequence of mathematics and physics courses was different for the two groups. The Civil/Mechanical students enrolled in their first mathematics course before undertaking their first physics course. The first mathematics and physics courses for the Electronics students were concurrent. Academic success in the two groups was affected by this difference. Over a five-year period the success rate of students graduating with a technology diploma was approximately twenty-five percent. Results from this study indicate that it was possible to reduce the very high attrition in the combined Access/Technology Programs. While the success rate for the Electronics students increased to 38% the rate for the Civil/Mechanical students increased dramatically to 77%. It is likely that several factors, related to the extra term in the Access Program for the Civil/Mechanical students, contributed to this high retention rate. Additional time, with less academic pressure in the first term of the Access Program, provided the Civil/Mechanical students with the opportunity to develop academic skills and maturity resulting in improved self-concept and academic identity. These students may have been better equipped to take advantage of the alternate instructional setting of the revised physics courses. Results from a wide range of studies in Physics Education Research provide ideas and opportunities to improve instruction and students conceptual understanding in introductory physics courses. Most studies focus on traditional students and curriculum. The development and implementation of alternate curriculum and instruction may improve outcomes for different groups of students, particularly for students in disciplines indirectly related to the sciences.

Engineering Design Processes in Seventh-Grade Classrooms: Bridging the Engineering Education Gap

ERIC Educational Resources Information Center

English, Lyn D.; Hudson, Peter B.; Dawes, Les

2012-01-01

This paper reports on some findings from the first year of a three-year longitudinal study, in which seventh- to ninth-graders were introduced to engineering education. Specifically, the paper addresses students' responses to an initial design activity involving bridge construction, which was implemented at the end of seventh grade. This paper…

Prefreshman and cooperative education for minorities in engineering: Preface. Final report, October 20, 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cherry, N.C.

1980-10-31

The University of Dayton (UD) and Wilberforce University (WU) Preface Program provides a key component in a comprehensive and successful strategy for increasing minority group members and women students entering and graduating in engineering and engineering technology. The high school level includes programs for minority and women students, teachers, and counselors. The University level includes a Dual Degree Program (DDP) between Wilberforce University and the University of Dayton; freshman academic assistance and support programs and schlorships (PREFACE/INSTEP) for the critical freshman year; and, co-op employment to provide motivation and financial resources for students in upper classes. In the past fivemore » years, UD and WU have awarded 89 PREFACE/INSTEP scholarships to students entering UD or DDP and 75 are still in engineering or engineering technology for an outstanding retention rate of 84.27%. Thirty-seven scholarships have been funded by the DOE and its predecessor, the ERDA with a retention rate in engineering and engineering technology of 81.1%. There will be ten PREFACE students graduating in engineering and engineering technology in 1980-1981. The first ERDA Preface Scholar graduated in August 1980 and currently works for a DOE contractor - Monsanto Research Corporation.« less

Applied aerodynamics experience for secondary science teachers and students

NASA Technical Reports Server (NTRS)

Abbitt, John D., III; Carroll, Bruce F.

1992-01-01

The Department of Aerospace Engineering, Mechanics & Engineering Science at the University of Florida in conjunction with the Alachua County, Florida School Board has embarked on a four-year project of university-secondary school collaboration designed to enhance mathematics and science instruction in secondary school classrooms. The goals are to provide teachers with a fundamental knowledge of flight sciences, and to stimulate interest among students, particularly women and minorities, toward careers in engineering, mathematics, and science. In the first year of the project, all thirteen of the eighth grade physical science teachers and all 1200 of the eighth grade physical science students in the county participated. The activities consisted of a three-day seminar taught at the college level for the teachers, several weeks of classroom instruction for all the students, and an airport field trip for a subgroup of about 430 students that included an orientation flight in a Cessna 172 aircraft. The project brought together large numbers of middle school students, teachers, undergraduate and graduate engineering students, school board administrators, and university engineering faculty.

Learning to Become Graduate Students: Japanese Women's Experience in the Research Unit in Engineering

ERIC Educational Resources Information Center

Hosaka, Masako

2010-01-01

Based on the analysis of 16 interviews with women first-year master's students at two national engineering schools in Japan, this article examines the socialisation role of compulsory undergraduate research experience in Japanese women's decisions to pursue graduate education and choices of the programme. The findings suggest that research…

Development and Evaluation of an Undergraduate Multidisciplinary Project Activity in Engineering and Design

ERIC Educational Resources Information Center

Smith, David R.; Cole, Joanne

2012-01-01

The School of Engineering and Design Multidisciplinary Project (MDP) at Brunel University is a one week long project based activity involving first year undergraduate students from across the School subject areas of Electronic and Computer Engineering, Mechanical Engineering, Civil Engineering and Design. This paper describes the main aims of the…

Building a Community of Scholars: One University's Comparison of "Typical" vs. Open Ended Ethics Case Studies in First-Year Engineering

ERIC Educational Resources Information Center

Reid, Kenneth J.

2012-01-01

Ethics is among the professional skills embedded in the first year engineering curriculum in many institutions. The general format of the study of ethics is similar to many other institutions: student teams review case studies and develop written and oral presentations on the ethical issues encountered. This report investigates whether the use of…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevin Young

In this paper, the author describes how engineers can increase the number of future engineers by volunteering as guest speakers in the elementary school classroom. The paper is divided into three main subjects. First, the importance of engineers speaking directly with young students is discussed. Next, several best practice techniques for speaking with young students are described. Finally, information on getting started as a guest speaker is presented, and a list of resources available to guest speakers is provided. The guest engineer speaking to an elementary school audience (ages 6-11) performs a critical role in encouraging young students to pursuemore » a career in engineering. Often, he or she is the first engineer these students meet in person, providing a crucial first impression of the engineering career field and a positive visual image of what an engineer really looks like. A dynamic speaker presenting a well-delivered talk creates a lasting, positive impression on students, influencing their future decisions to pursue careers in engineering. By reaching these students early in life, the guest speaker will help dispel the many prevailing stereotypes about engineers which discourage so many students, especially young women, from considering this career. The guest speaker can ensure young students gain a positive first impression of engineers and the engineering career field by following some best practice techniques in preparing for and delivering their presentation. The author, an electrical engineer, developed these best practice techniques over the past 10 years while presenting over 350 talks on engineering subjects to elementary school students as a volunteer speaker with the U.S. Department of Energy, Idaho National Laboratory’s Speakers Bureau. Every engineer can make a meaningful contribution toward reversing the predicted shortfall of future engineers by volunteering to speak with young students at the elementary school level. Elementary school teachers typically have a limited education in engineering and are eager to have career engineers speak with their students. As an engineer, there are many opportunities to get involved with guest speaking at the elementary school level. If you have a young child, start by meeting with her or his teacher and volunteering to give a presentation on engineering to the class. Many organizations have formal speakers bureaus. If your organization does not have one, consider starting one. There are several excellent resources on the Internet, such as the IEEE Center for Pre-University Engineering Education’s TryEngineering.org Web site. This site is designed for young students, teachers and parents, giving information on engineering careers and engineering activities the guest speaker can use to prepare a dynamic and informative presentation. Young students who have experienced a positive interaction with an engineer are more likely to pursue a career in engineering. Effective guest speaking by engineers in elementary school classrooms today will increase the likelihood these young students will become the desperately needed engineers of our future.« less

The effects of computer-aided design software on engineering students' spatial visualisation skills

NASA Astrophysics Data System (ADS)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

An Investigation of Factors Related to Self-Efficacy for Java Programming among Engineering Students

ERIC Educational Resources Information Center

Askar, Petek; Davenport, David

2009-01-01

The purpose of this study was to examine the factors related to self-efficacy for Java programming among first year engineering students. An instrument assessing Java programming self-efficacy was developed from the computer programming self-efficacy scale of Ramalingam & Wiedenbeck. The instrument was administered at the beginning of the…

Toward Teaching Methods that Develop Learning and Enhance Problem Solving Skills in Engineering Students

ERIC Educational Resources Information Center

Loji, K.

2012-01-01

Problem solving skills and abilities are critical in life and more specifically in the engineering field. Unfortunately, significant numbers of South African students who are accessing higher education lack problem solving skills and this results in poor academic performance jeopardizing their progress especially from first to second year. On the…

The Effect of Curricular Activities on Learner Autonomy: The Perspective of Undergraduate Mechanical Engineering Students

ERIC Educational Resources Information Center

Duarte, M.; Leite, C.; Mouraz, A.

2016-01-01

This study researches how first-year engineering students perceived the influence of curricular activities on their own learning autonomy, measured with an adaptation of the Personal Responsibility Orientation to Self-direction in Learning Scale (PRO-SDLS). Participants were questioned to assess the influence of the teacher's role. The results…

A Longitudinal Evaluation of a Project-Based Learning Initiative in an Engineering Undergraduate Programme

ERIC Educational Resources Information Center

Hall, Wayne; Palmer, Stuart; Bennett, Mitchell

2012-01-01

Project-based learning (PBL) is a well-known student-centred methodology for engineering design education. The methodology claims to offer a number of educational benefits. This paper evaluates the student perceptions of the initial and second offering of a first-year design unit at Griffith University in Australia. It builds on an earlier…

Prefreshman and Cooperative Education Program. [PREFACE training

NASA Technical Reports Server (NTRS)

1976-01-01

Of the 93 students enrolled in the PREFACE program over its four-year history, 70 are still in engineering school. Tables show profiles of student placement and participation from 1973 to 1977 (first semester completed). During the 1977 summer, 10 students were placed at NASA Goddard, 8 at DOE-Brookhaven, and 2 at American Can. Eleven students with less high school math preparation remained on campus for formal precalculus classes. Majors of the students in the program include civil, chemical, electrical, and mechanical engineering. Student satisfaction with their training experiences is summarized.

Connecting Incoming Freshmen with Engineering through Hands-On Projects

ERIC Educational Resources Information Center

Cui, Suxia; Wang, Younhui; Yang, Yonggao; Nave, Felecia M.; Harris, Kendall T.

2011-01-01

Engineering programs suffer a high attrition rate, which causes the nation to graduate much less engineers. A survey of the literature reveals that the high attrition rate is due mainly to the fact that the first year of an engineering program is all fundamental theory and students don't see the connection to their future engineering careers. To…

Shape Memory Polymers: A Joint Chemical and Materials Engineering Hands-On Experience

ERIC Educational Resources Information Center

Seif, Mujan; Beck, Matthew

2018-01-01

Hands-on experiences are excellent tools for increasing retention of first year engineering students. They also encourage interdisciplinary collaboration, a critical skill for modern engineers. In this paper, we describe and evaluate a joint Chemical and Materials Engineering hands-on lab that explores cross-linking and glass transition in…

Core Skills Assessment to Improve Mathematical Competency

ERIC Educational Resources Information Center

Carr, Michael; Bowe, Brian; Ní Fhloinn, Eabhnat

2013-01-01

Many engineering undergraduates begin third-level education with significant deficiencies in their core mathematical skills. Every year, in the Dublin Institute of Technology, a diagnostic test is given to incoming first-year students, consistently revealing problems in basic mathematics. It is difficult to motivate students to address these…

Cause-effect analysis: improvement of a first year engineering students' calculus teaching model

NASA Astrophysics Data System (ADS)

van der Hoff, Quay; Harding, Ansie

2017-01-01

This study focuses on the mathematics department at a South African university and in particular on teaching of calculus to first year engineering students. The paper reports on a cause-effect analysis, often used for business improvement. The cause-effect analysis indicates that there are many factors that impact on secondary school teaching of mathematics, factors that the tertiary sector has no control over. The analysis also indicates the undesirable issues that are at the root of impeding success in the calculus module. Most important is that students are not encouraged to become independent thinkers from an early age. This triggers problems in follow-up courses where students are expected to have learned to deal with the work load and understanding of certain concepts. A new model was designed to lessen the impact of these undesirable issues.

Graduation and attrition of engineering students in Greece

NASA Astrophysics Data System (ADS)

Caroni, C.

2011-03-01

Greek engineering Schools have a high status and attract good students. However, we show that in the leading institution, the National Technical University of Athens, only 27% of the students admitted in 1992-2003 graduated after the nominal five years study: the median graduation time was 73 months (reaching 93 months in one School) and 12% are predicted never to graduate at all, most without withdrawing officially. Results differ between Schools, between routes of admission and by gender (females being better than males). Systematic study of reasons for not completing or delay in completing studies is urgently needed. Overall, 4% of the students withdraw officially during their first year. The percentage of withdrawals by School is negatively correlated with the percentage that gave that School as first choice in the entrance procedure, indicating problems in the admission system.

The Effectiveness of Contextual Learning on Physics Achievement in Career Technical Education

NASA Astrophysics Data System (ADS)

Arcand, Scott Andrew

The purpose of this casual-comparative study was to determine if students being taught the Minnesota Science Physics Standards via contextual learning methods in Project Lead the Way (PLTW) Principles of Engineering or the PLTW Aerospace Engineering courses, taught by a Career Technical Education (CTE) teacher, achieve at the same rate as students in a physics course taught by a science teacher. The PLTW courses only cover the standards taught in the first trimester of physics. The PLTW courses are two periods long for one trimester. Students who successfully pass the PLTW Principles of Engineering course or the PLTW Engineering Aerospace course earn one-half credit in physics and one-half elective credit. The instrument used to measure student achievement was the district common summative assessment for physics. The Common Summative Assessment scores were pulled from the data warehouse from the first trimester of the 2013-2014 school year. Implications of the research address concepts of contextual learning especially in the Career Technical Education space. The mean score for Physics students (30.916) and PLTW Principles of Engineering students (32.333) was not statistically significantly different. Students in PLTW Principles of Engineering achieved at the same rate as students in physics. Due to the low rate of students participating in the Common Summative Assessment in PTLW Aerospace (four out of seven students), there is not enough data to determine if there is a significant difference in the Physics A scores and PLTW Aerospace Engineering scores.

Estimate of Students' Workload and the Impact of the Evaluation System on Students' Dedication to Studying a Subject in First-Year Engineering Courses

ERIC Educational Resources Information Center

Garmendia, Mikel; Guisasola, Jenaro; Barragues, J. I.; Zuza, Kristina

2008-01-01

In order to adapt current subjects to the ECTS credits system, it is necessary to estimate how much time a student has to invest in learning a subject. The Polytechnic Engineering School of the University of the Basque Country has made an initial study to investigate this matter in several subjects. A weekly questionnaire design was used for all…

Building inclusive engineering identities: implications for changing engineering culture

NASA Astrophysics Data System (ADS)

Atadero, Rebecca A.; Paguyo, Christina H.; Rambo-Hernandez, Karen E.; Henderson, Heather L.

2018-05-01

Ongoing efforts to broaden the participation of women and people of colour in engineering degree programmes and careers have had limited success. This paper describes a different approach to broadening participation that seeks to work with all students and develop inclusive engineering identities. Researchers worked with the instructors of two first-year engineering courses to integrate curriculum activities designed to promote the formation of engineering identities and build an appreciation for how diversity and inclusion strengthen engineering practice. Multilevel modelling results indicated positive effects of the intervention on appreciation for diversity but no effects on engineering identity, and qualitative results indicated students learned the most about diversity not through one of the intervention activities, but through team projects in the courses. We also describe lessons learned in how to teach engineering students about diversity in ways that are relevant to engineering.

An appraisal of an online tutorial system for the teaching and learning of engineering physics in conjunction with contextual physics and mathematics, and relevant mathematics

NASA Astrophysics Data System (ADS)

Bhathal, Ragbir

2016-09-01

The number of students entering engineering schools in Australian universities has increased tremendously over the last few years because of the Australian Federal Government's policy of increasing the participation rates of Higher School Certificate students and students from low social economic status backgrounds in the tertiary sector. They now come with a diverse background of skills, motivations and prior knowledge. It is imperative that new methods of teaching and learning be developed. This paper describes an online tutorial system used in conjunction with contextual physics and mathematics, and the revision of the relevant mathematical knowledge at the appropriate time before a new topic is introduced in the teaching and learning of engineering physics. Taken as a whole, this study shows that students not only improved their final examination results but there was also an increase in the retention rate of first-year engineering students which has financial implications for the university.

Using the Domain Identification Model to Study Major and Career Decision-Making Processes

ERIC Educational Resources Information Center

Tendhar, Chosang; Singh, Kusum; Jones, Brett D.

2018-01-01

The purpose of this study was to examine the extent to which (1) a domain identification model could be used to predict students' engineering major and career intentions and (2) the MUSIC Model of Motivation components could be used to predict domain identification. The data for this study were collected from first-year engineering students. We…

Beyond Blackboards: Engaging Underserved Middle School Students in Engineering.

PubMed

Blanchard, Sarah; Judy, Justina; Muller, Chandra; Crawford, Richard H; Petrosino, Anthony J; White, Christina K; Lin, Fu-An; Wood, Kristin L

Beyond Blackboards is an inquiry-centered, after-school program designed to enhance middle school students' engagement with engineering through design-based experiences focused on the 21 st Century Engineering Challenges. Set within a predominantly low-income, majority-minority community, our study aims to investigate the impact of Beyond Blackboards on students' interest in and understanding of engineering, as well as their ability to align their educational and career plans. We compare participants' and nonparticipants' questionnaire responses before the implementation and at the end of the program's first academic year. Statistically significant findings indicate a school-wide increase in students' interest in engineering careers, supporting a shift in school culture. However, only program participants showed increased enjoyment of design-based strategies, understanding of what engineers do, and awareness of the steps for preparing for an engineering career. These quantitative findings are supported by qualitative evidence from participant focus groups highlighting the importance of mentors in shaping students' awareness of opportunities within engineering.

Investigating the Extent That an Integrative Learning Module Broadens the Perception of First-Year Students about the Engineering Profession

ERIC Educational Resources Information Center

Singer, Kerri Patrick; Foutz, Tim; Navarro, Maria; Thompson, Sidney

2015-01-01

Engineers today need both engineering knowledge and social science knowledge to solve complex problems. However, most people have a traditional view of engineering as a field dominated by math and science foci, with little social consequence. This study examined and compared perceptions about engineering from Freshmen taking three different First…

Changing the Engineering Student Culture with Respect to Academic Integrity and Ethics.

PubMed

VanDeGrift, Tammy; Dillon, Heather; Camp, Loreal

2017-08-01

Engineers create airplanes, buildings, medical devices, and software, amongst many other things. Engineers abide by a professional code of ethics to uphold people's safety and the reputation of the profession. Likewise, students abide by a code of academic integrity while learning the knowledge and necessary skills to prepare them for the engineering and computing professions. This paper reports on studies designed to improve the engineering student culture with respect to academic integrity and ethics. To understand the existing culture at a university in the USA, a survey based on a national survey about cheating was administered to students. The incidences of self-reported cheating and incidences of not reporting others who cheat show the culture is similar to other institutions. Two interventions were designed and tested in an introduction to an engineering course: two case studies that students discussed in teams and the whole class, and a letter of recommendation assignment in which students wrote about themselves (character, strengths, examples of ethical decisions) three years into the future. Students were surveyed after the two interventions. Results show that first-year engineering students appreciate having a code of academic integrity and they want to earn their degree without cheating, yet less than half of the students would report on another cheating student. The letter of recommendation assignment had some impact on getting students to think about ethics, their character, and their actions. Future work in changing the student culture will continue in both a top-down (course interventions) and bottom-up (student-driven interventions) manner.

Outsiders Looking In: Tutor Expertise in Engineering Writing

ERIC Educational Resources Information Center

Bengesai, Annah

2015-01-01

Drawing on an academic literacies approach, this article explores the representations of technical communication by non-content expert tutors teaching the Technical Communication for Engineering course at a South African university. The course is offered to all first year engineering students as a developmental academic literacy course. It is…

A Course to Promote Informed Selection of an Engineering Major Using a Partially Flipped Classroom Model

ERIC Educational Resources Information Center

Meyers, Kerry Lynn

2016-01-01

A 1 credit hour First-Year Engineering Course which provides background to students on the engineering disciplinary options available to them was redesigned to help inform the selection of their engineering major for future study. Initially, course administration was a large lecture class but was transformed into smaller classes that were…

Girls Helping Girls: Assessing the Influence of College Student Mentors in an Afterschool Engineering Program

ERIC Educational Resources Information Center

Holmes, Stephanie; Redmond, Adrienne; Thomas, Julie; High, Karen

2012-01-01

Current data suggest fewer females than males continue to be interested in engineering and that this gender gap is first evidenced during middle school years. One might expect that female engineering role models would encourage adolescent girls to pursue future careers in engineering and thereby increase the girls' interests in and attitudes…

Improving motivation and engagement in core engineering courses with student teams

NASA Astrophysics Data System (ADS)

Trenshaw, Kathryn Faye

Team-based projects are common in capstone engineering design courses and increasingly common in first-year engineering programs. Despite high enrollments and budget cutbacks affecting many programs, second- and third-year students can also benefit from team-based project experiences, which motivate them to succeed in engineering and prepare them for a globally competitive workforce. My dissertation research demonstrates that team design projects can be incorporated into the curricula of engineering departments, and these projects result in positive affective outcomes for students. Using ABET outcomes and Self Determination Theory (SDT) as the background for my studies, I investigated students' confidence, motivation, and sense of community after experiencing team design projects in two different engineering departments at a large public institution. In the first study, I used a sequential mixed methods approach with a primary quantitative phase followed by an explanatory qualitative phase to evaluate a chemical engineering program that integrated team design projects throughout the curriculum. The evaluation methods included a survey based on desired ABET outcomes for students and focus groups to expand on the quantitative results. Students reported increased confidence in their design, teamwork, and communication skills after completing the projects. In my second and third studies, I used qualitative interviews based on SDT to explore student motivation in an electrical and computer engineering course redesigned to support students' intrinsic motivation to learn. SDT states that intrinsic motivation to learn is supported by increasing students' sense of autonomy, competence, and relatedness in regard to their learning. Using both narrative inquiry and phenomenological methodologies, I analyzed data from interviews of students for mentions of autonomy, competence, and relatedness as well as course events that were critical in changing students' motivation. Analysis revealed that individual choice, constructive failures, and a strong sense of community in the classroom were critical to moving students toward intrinsic motivation. Further, community building through team experiences characterized the essence of the student experience in the course. My research highlights a need for better quantitative measures of students' affective outcomes, specifically motivation, in the context of a single course. Based on the results of my studies, SDT should be reevaluated in terms of possible interdependencies between autonomy, competence, and relatedness, and how the social context of large engineering courses may create a deeper need for supporting relatedness.

X-traktor: A Rookie Robot, Simple, Yet Complex, Impeccably Designed, a Very Innovative Multidisciplinary Engineering Masterpiece

NASA Technical Reports Server (NTRS)

Henderson, A. J., Jr.

2001-01-01

FIRST is the acronym of For Inspiration and Recognition of Science and Technology. FIRST is a 501.C.3 non-profit organization whose mission is to generate an interest in science and engineering among today's young adults and youth. This mission is accomplished through a robot competition held annually in the spring of each year. NASAs Marshall Space Flight Center, Education Programs Department, awarded a grant to Lee High School, the sole engineering magnet school in Huntsville, Alabama. MSFC awarded the grant in hopes of fulfilling its goal of giving back invaluable resources to its community and engineers, as well as educating tomorrow's work force in the high-tech area of science and technology. Marshall engineers, Lee High School students and teachers, and a host of other volunteers and parents officially initiated this robot design process and competitive strategic game plan. The FIRST Robotics Competition is a national engineering contest, which immerses high school students in the exciting world of science and engineering. Teaming with engineers from government agencies, businesses, and universities enables the students to learn about the engineering profession. The students and engineers have six weeks to work together to brainstorm, design, procure, construct, and test their robot. The team then competes in a spirited, 'no-holds barred' tournament, complete with referees, other FIRST-designed robots, cheerleaders, and time clocks. The partnerships developed between schools, government agencies, businesses, and universities provide an exchange of resources and talent that build cooperation and expose students to new and rewarding career options. The result is a fun, exciting, and stimulating environment in which all participants discover the important connections between classroom experiences and real-world applications. This paper will highlight the story, engineering development, and evolutionary design of Xtraktor, the rookie robot, a manufacturing marvel and engineering achievement.

Having Students Create Short Video Clips to Help Transition from Naïve Conceptions about Mechanics to True Newtonian Physics

ERIC Educational Resources Information Center

Corten-Gualtieri, Pascale; Ritter, Christian; Plumat, Jim; Keunings, Roland; Lebrun, Marcel; Raucent, Benoit

2016-01-01

Most students enter their first university physics course with a system of beliefs and intuitions which are often inconsistent with the Newtonian frame of reference. This article presents an experiment of collaborative learning aiming at helping first-year students in an engineering programme to transition from their naïve intuition about dynamics…

Does Students' Confidence in Their Ability in Mathematics Matter?

ERIC Educational Resources Information Center

Parsons, Sarah; Croft, Tony; Harrison, Martin

2009-01-01

Research was conducted into first year engineering students' learning of mathematics in a university college during 2005-2007. The aims were to understand better students' confidences and explore which factors affected performance and how these were inter-related. Questionnaires were administered which posed questions regarding previous…

University Students' Explanatory Models of the Interactions between Electric Charges and Magnetic Fields

ERIC Educational Resources Information Center

Saglam, Murat

2010-01-01

This study aimed to investigate the models that co-existed in students' cognitive structure to explain the interactions between electric charges and uniform magnetic fields. The sample consisted of 129 first-year civil engineering, geology and geophysics students from a large state university in western Turkey. The students answered five…

International Engineering Students--Avoiding Plagiarism through Understanding the Western Academic Context of Scholarship

ERIC Educational Resources Information Center

Duff, Andrea H.; Rogers, Derek P.; Harris, Michael B.

2006-01-01

Despite the best attempts of academic staff to teach students the mechanics of citation, the rules of referencing continue to be broken, particularly by those new to Western university systems (either first-year undergraduate students or international students from different cultural backgrounds). In late 2003, 16 postgraduate international…

Impact of Cognitive-Based Instructional Intervention on Learning Motivation: The Implementation of Student-Made Glossary in a Programming-Oriented Engineering Problem-Solving Course and Its Impact on Learning Motivation

ERIC Educational Resources Information Center

Huang, David Wenhao; Aagard, Hans; Diefes-Dux, Heidi

2004-01-01

This article describes the purpose, development, and implementation of a cognitive-based instructional intervention and its impact on learning motivation. The study was conducted in a programming-based problemsolving course for first-year engineering students. The results suggest that the instructional intervention developed based on the…

Designing Transferable Skills Inventory for Assessing Students Using Group Discussion: A Case Study of First Year Electrical and Electronics Engineering Students

ERIC Educational Resources Information Center

Tejaswani, K.; Madhuri, G. V.

2015-01-01

Employability skills among engineering graduates have been a concern due to their inability to perform on a professional platform to the employer's expected level. As they are higher cognitive skills, they are to be nurtured during the graduation period. Keeping this in view, group discussions are identified as one of the methods to elicit…

Changes in the Social Responsibility Attitudes of Engineering Students Over Time.

PubMed

Bielefeldt, Angela R; Canney, Nathan E

2016-10-01

This research explored how engineering student views of their responsibility toward helping individuals and society through their profession, so-called social responsibility, change over time. A survey instrument was administered to students initially primarily in their first year, senior year, or graduate studies majoring in mechanical, civil, or environmental engineering at five institutions in September 2012, April 2013, and March 2014. The majority of the students (57 %) did not change significantly in their social responsibility attitudes, but 23 % decreased and 20 % increased. The students who increased, decreased, or remained the same in their social responsibility attitudes over time did not differ significantly in terms of gender, academic rank, or major. Some differences were found between institutions. Students who decreased in social responsibility initially possessed more positive social responsibility attitudes, were less likely to indicate that college courses impacted their views of social responsibility, and were more likely to have decreased in the frequency that they participated in volunteer activities, compared to students who did not change or increased their social responsibility. Although the large percentage of engineering students who decreased their social responsibility during college was disappointing, it is encouraging that courses and participation in volunteer activities may combat this trend.

Young engineers and scientists - a mentorship program emphasizing space education

NASA Astrophysics Data System (ADS)

Boice, Daniel; Asbell, Elaine; Reiff, Patricia

Young Engineers and Scientists (YES) is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA) during the past 16 years. The YES program provides talented high school juniors and seniors a bridge between classroom instruction and real world, research experiences in physical sciences (including space science) and engineering. The first component of YES is an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year. Afterwards, students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. During these years, YES has developed a website for topics in space science from the perspective of high school students, including NASA's Magnetospheric Multiscale Mission (MMS) (http://yesserver.space.swri.edu). High school science teachers participate in the workshop and develop space-related lessons for classroom presentation in the academic year. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. Over the past 16 years, all YES graduates have entered college, several have worked for SwRI, one business has started, and three scientific publications have resulted. Acknowledgements. We acknowledge funding and support from the NASA MMS Mission, Texas Space Grant Consortium, Northside Independent School District, SwRI, and several local charitable foundations.

Prior Knowledge of Mechanics amongst First Year Engineering Students

ERIC Educational Resources Information Center

Clements, Dick

2007-01-01

In the last 25 years, A-level Mathematics syllabi have changed very considerably, introducing a broader range of application areas but reducing the previous emphasis on classical mechanics. This article describes a baseline survey undertaken to establish in detail the entry levels in mechanics for the cohort of students entering Engineering…

Evaluations of Introducing Project-Based Design Activities in the First and Second Years of Engineering Courses

ERIC Educational Resources Information Center

Edward, Norrie S.

2004-01-01

This paper presents three evaluated case studies of the use of design activities in the early years of undergraduate engineering courses. Analyses of academic performance in these activities and in a separate test of understanding were correlated with student perceptions of the activities and with measures of learning style. General student…

Students' Conceptual Difficulties in Hydrodynamics

ERIC Educational Resources Information Center

Suarez, Alvaro; Kahan, Sandra; Zavala, Genaro; Marti, Arturo C.

2017-01-01

We describe a study on the conceptual difficulties faced by college students in understanding hydrodynamics of ideal fluids. This study was based on responses obtained in hundreds of written exams complemented with several oral interviews, which were held with first-year engineering and science university students. Their responses allowed us to…

Using Minute Papers to Determine Student Cognitive Development Levels

ERIC Educational Resources Information Center

Vella, Lia

2015-01-01

Can anonymous written feedback collected during classroom assessment activities be used to assess students' cognitive development levels? After library instruction in a first-year engineering design class, students submitted minute papers that included answers to "what they are left wondering." Responses were coded into low, medium and…

Research Skills and Ethics--A Graduate Course Empowering Graduate Students for Productive Research Careers in Graduate School and Beyond

NASA Astrophysics Data System (ADS)

Mabrouk, Patricia Ann

2001-12-01

This paper describes a course for first-year graduate students that teaches the fundamental so-called "soft skills" required for success in graduate school and beyond. Topics covered are ethics, laboratory safety and waste management, chemical information retrieval and literacy, experimental design, scientific record keeping, statistics, career development, and communications, including technical writing and oral presentation. Whenever possible students are put in direct contact with local technical experts and available resources. The course, well regarded by both students and faculty, has now been taught at Northeastern University for five years in the summer academic quarter to graduate students in chemistry and related departments (pharmacy and chemical engineering) who have successfully completed their first-year course work.

Education through Experience.

ERIC Educational Resources Information Center

Fowler, Brian D.

1995-01-01

Describes the Langley Aerospace Research Summer Scholars Program, a 10-week internship program for junior and senior undergraduates and first-year graduate students who are pursuing degrees in engineering or science. The program enables participants to conduct research under the supervision of NASA scientists and engineers. Profiles American…

Effects of Curriculum and Nonacademic Factors on Undergraduate Electronic Engineering Program Retention

NASA Astrophysics Data System (ADS)

Sulaiman, Munir

Science, technology, engineering, and mathematics (STEM) programs in higher education institutions, particularly engineering programs, face challenges related to recruitment, retention, and graduation rates. The purpose of this study was to determine whether there are significant relationships among students' major preference, academic skills, nonacademic characteristics and perceptions, and retention to year 2 among students in electronic engineering, other STEM, and non STEM majors. The academic skills considered were study habits, intellectual interest, verbal and writing confidence, and academic assistance. The non-academic factors included academic support, family support, financial support, and student social integration into the campus environment. Tinto's theory of retention served as the theoretical framework. The research design was quantitative with a general linear method of analysis using responses to the College Student Inventory (CSI) survey as secondary data to determine the relationships among the independent variables (major and academic and non-academic factors) and dependent variable (retention). Participants were 3,575 first year undergraduate full-time students from three entering classes, 2012 to 2014. Findings suggested that student major and non-academic factors had no effect on student retention, but student study habits and seeking academic assistance were predictors of retention in each of the three groups of majors: engineering, other STEM majors, and nonSTEM majors. Strategies to help increase undergraduate students' study skills and help seeking behaviors may contribute to positive social change at HBCU institutions.

Scaling Up: Adapting a Phage-Hunting Course to Increase Participation of First-Year Students in Research

ERIC Educational Resources Information Center

Staub, Nancy L.; Poxleitner, Marianne; Braley, Amanda; Smith-Flores, Helen; Pribbenow, Christine M.; Jaworski, Leslie; Lopatto, David; Anders, Kirk R.

2016-01-01

Authentic research experiences are valuable components of effective undergraduate education. Research experiences during the first years of college are especially critical to increase persistence in science, technology, engineering, and mathematics fields. The Science Education Alliance Phage Hunters Advancing Genomics and Evolutionary Science…

Learning to become graduate students: Japanese women's experience in the research unit in engineering

NASA Astrophysics Data System (ADS)

Hosaka, Masako

2010-12-01

Based on the analysis of 16 interviews with women first-year master's students at two national engineering schools in Japan, this article examines the socialisation role of compulsory undergraduate research experience in Japanese women's decisions to pursue graduate education and choices of the programme. The findings suggest that research experiences in a small independent research unit within the major department convinced Japanese women engineering students of their academic and social success as graduate students in the current environment. Although participants generally adapted themselves to the research unit through their research, there is a variation in the degree to which they were smoothly integrated into the research unit, reflecting organisational and individual differences.

Photonics education development for electrical engineering students

NASA Astrophysics Data System (ADS)

Cao, Yang; Luo, Yuan; Liu, Yu; Hu, ZhangFang; Cai, Xuemei

2017-08-01

We describe the contents of an advanced undergraduate course on photonics at School of Electrical Engineering, Chongqing University of Posts and Telecommunications. The main goal of the course is to equip the student with the necessary theoretical and practical knowledge to participate in photonics-related industry and further graduate level study and research if they choose. The prerequisites include college-level physics and higher mathematics which a general engineering student has already had in his/her first and second year college study. Although applications of photonics are ubiquitous such as telecommunications, photonic computing, spectroscopy, military technology, and biophotonics etc. Telecommunication information system application is more emphasized in our course considering about the potential job chances for our students.

Considering Student Retention as a Complex System: A Possible Way forward for Enhancing Student Retention

ERIC Educational Resources Information Center

Forsman, Jonas; van den Bogaard, Maartje; Linder, Cedric; Fraser, Duncan

2015-01-01

This study uses multilayer minimum spanning tree analysis to develop a model for student retention from a complex system perspective, using data obtained from first-year engineering students at a large well-regarded institution in the European Union. The results show that the elements of the system of student retention are related to one another…

Houston Pre-Freshman Enrichment Program (Houston PREP). Final report, June 9, 1997--July 25, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-10-01

The 1997 Houston Pre-Freshman Enrichment Program (PREP) was conducted at the campus of the University of Houston-Downtown from June 9 to July 25, 1997. Program participants were recruited from the Greater Houston Area. All participants were identified as high-achieving students with an interest in learning about the engineering and science professions. The goal of the program was to better prepare our pre-college youth prior to entering college as mathematics, science and engineering majors. The program participants were middle school and high school students from the Aldine, Alief, Channel View, Clear Creek, Cypress-Fairbanks, Fort Bend, Galena Park, Houston, Humble, Katy, Klein,more » North Forest, Pasadena, Private, and Spring Branch Independent School Districts. Of the 194 students starting the program, 165 students were from economically and socially disadvantage groups under-represented in the engineering and science professions, and 118 of the 194 were women. Our First Year group for 1997 composed of 96% minority and women students. Second and Third Year students combined were 96% minority or women. With financial support from the Center for Computational Sciences and Advanced Distributed Simulation, the Fourth Year Program was added to PREP this year. Twelve students completed the program (83% minority or women).« less

On flipping the classroom in large first year calculus courses

NASA Astrophysics Data System (ADS)

Jungić, Veselin; Kaur, Harpreet; Mulholland, Jamie; Xin, Cindy

2015-05-01

Over the course of two years, 2012--2014, we have implemented a 'flipping' the classroom approach in three of our large enrolment first year calculus courses: differential and integral calculus for scientists and engineers. In this article we describe the details of our particular approach and share with the reader some experiences of both instructors and students.

Longitudinal Study of Factors Impacting the Implementation of Notebook Computer Based CAD Instruction

ERIC Educational Resources Information Center

Goosen, Richard F.

2009-01-01

This study provides information for higher education leaders that have or are considering conducting Computer Aided Design (CAD) instruction using student owned notebook computers. Survey data were collected during the first 8 years of a pilot program requiring engineering technology students at a four year public university to acquire a notebook…

Chemistry teaching in the new degrees of Agricultural Engineering

NASA Astrophysics Data System (ADS)

Arce, Augusto; Tarquis, Ana Maria; Castellanos, Maria Teresa; Requejo, Maria Isabel; Cartagena, Maria Carmen

2013-04-01

The academic year 2011-12 is the second one implementing Bologna process in ETSI at the subjects of Agricultural Chemistry I and Chemistry II in the new four Degrees: Graduate in Engineering and Agricultural Science, Food Engineering Graduate, Graduate Environmental and engineering Graduate in Biotechnology, for it has been necessary to design and implement new interactive methodologies in the teaching-learning process based on the use of the virtual platform of the UPM, implement new evaluation systems that promote continued participation active student and the development of educational materials to support the subjects of chemistry designed new degrees within the EEES. In addition to the above actions, an assessment test prior chemistry knowledge has been made to all students who enter into Agricultural Grades, improving laboratory practices and the comparative study of academic obtained by the students of the new grades in the subjects of chemistry during the year 2011-12 compared to the 2010-11 academic year. More than 15,000 data have showed a good correlation between the student's prior knowledge, the level test performed, test scores, the overall success rate of the course and the abandonment of the different degrees. Academic results show a higher percentage of students enrolled and presented on a greater number of passes on students enrolled in the 2011-12 academic year for students enrolled in the previous academic year. The improved results have influenced the actions taken and the level of knowledge with students entering. Finally, we propose possible solutions to fix these results in future courses, aiming to improve the degree of efficiency, success and significant absenteeism in the first year as it will condition the dropout rate of these new degrees. Acknowledgements: Proyecto de Innovación Educativa N° IE02054-11/12 UPM. 2012.

Examining Thai high school students' developing STEM projects

NASA Astrophysics Data System (ADS)

Teenoi, Kultida; Siripun, Kulpatsorn; Yuenyong, Chokchai

2018-01-01

Like others, Thailand education strongly focused on STEM education. This paper aimed to examine existing Thai high school students' integrated knowledge about science, technology, engineering, and mathematics (STEM) in their developing science project. The participants included 49 high school students were studying the subject of individual study (IS) in Khon Kaen wittayayon school, Khon Kaen, Thailand. The IS was provided to gradually enhance students to know how to do science project starting from getting start to do science projects, They enrolled to study the individual study of science project for three year in roll. Methodology was qualitative research. Views of students' integrated knowledge about STEM were interpreted through participant observation, interview, and students' science projects. The first author as participant observation has taught this group of students for 3 years. It found that 16 science projects were developed. Views of students' integrated knowledge about STEM could be categorized into three categories. These included (1) completely indicated integration of knowledge about science, technology, engineering, and mathematics, (2) partial indicated integration of knowledge about science, technology, engineering, and mathematics, and (3) no integration. The findings revealed that majority of science projects could be categorized as completely indicated integration of knowledge about science, technology, engineering, and mathematics. The paper suggested some ideas of enhancing students to applying STEM for developing science projects.

Understanding the Changing Dynamics of the Gender Gap in Undergraduate Engineering Majors: 1971-2011

ERIC Educational Resources Information Center

Sax, Linda J.; Kanny, M. Allison; Jacobs, Jerry A.; Whang, Hannah; Weintraub, Dayna S.; Hroch, Amber

2016-01-01

In this paper we examine the level and determinants of entering college students' plans to major in engineering. While the overall level of interest in engineering has fluctuated between 1971 and 2011, a very large gender gap in freshman interest remains. We find that the percent of first-year women who plan to major in engineering is roughly the…

Student Self-Efficacy in Introductory Project-Based Learning Courses

NASA Astrophysics Data System (ADS)

Pleiss, Geoffrey; Zastavker, Yevgeniya V.

2012-02-01

This study investigates first-year engineering students' self-efficacy in two introductory Project-Based Learning (PjBL) courses -- Physics (Mechanics) Laboratory and Engineering Design -- taught at a small technical institution. Twelve students participated in semi-structured open-ended interviews about their experiences in both courses. Analysis was performed using grounded theory. Results indicate that students had lower self-efficacy in Physics Lab than in Engineering Design. In Physics Lab, students reported high levels of faculty-supported scaffolding related to final project deliverables, which in turn established perceptions of an outcome-based course emphasis. Conversely, in Engineering Design, students observed high levels of scaffolding related to the intermediate project deliverables, highlighting process-centered aspects of the course. Our analyses indicate that this difference in student perceptions of course emphases -- resulting from the differences in scaffolding -- is a primary factor for the discrepancy in self-efficacy between Physics Lab and Engineering Design. Future work will examine how other variables (e.g., academic background, perception of community, gender) affect students' self-efficacy and perception of scaffolding in these PjBL courses.

Engaging students in learning: findings from a study of project-led education

NASA Astrophysics Data System (ADS)

Fernandes, Sandra; Mesquita, Diana; Assunção Flores, Maria; Lima, Rui M.

2014-01-01

This paper reports on findings from a three-year study of project-based learning implemented in the first year of the Industrial Engineering and Management programme, at the University of Minho, Portugal. This particular model was inspired on project-led education (PLE), following Powell and Weenk's [2003. Project-Led Engineering Education. Utrecht: Lemma] work. It aims to analyse students' perceptions of PLE as a learning device and its implications for faculty and students' role in teaching and learning. Data collection took place in two phases through individual surveys and focus groups to students. Findings suggest the importance of PLE as a device to enhance meaningful learning and provide evidence from students that it helps to increase their engagement in learning. Implications of PLE for faculty and students role in teaching and learning will be discussed in the paper.

Young Engineers and Scientists: a Mentorship Program

NASA Astrophysics Data System (ADS)

Boice, Daniel C.; Wuest, Martin; Marilyn, Koch B.

The Young Engineers and Scientists (YES) Program is a community partnership between Southwest Research Institute (SwRI) and local high schools in San Antonio Texas (USA). It provides talented high school juniors and seniors a bridge between classroom instruction and real-world research experiences in physical sciences and engineering. YES consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems attend mini-courses and seminars on electronics computers and the Internet careers science ethics and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year students publicly present and display their work acknowledging their accomplishments and spreading career awareness to other students and teachers. YES has been highly successful during the past 10 years. All YES graduates have entered college several have worked for SwRI and three scientific publications have resulted. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors.

Students' Perceptions of and Responses to Teaching Assistant and Peer Feedback

ERIC Educational Resources Information Center

Rodgers, Kelsey J.; Horvath, Aladar K.; Jung, Hyunyi; Fry, Amanda S.; Diefes-Dux, Heidi A.; Cardella, Monica E.

2015-01-01

Authentic open-ended problems are increasingly appearing in university classrooms at all levels. Formative feedback that leads to learning and improved student work products is a challenge, particularly in large enrollment courses. This is a case study of one first-year engineering student team's experience with teaching assistant and peer…

Predicting performance in a first engineering calculus course: implications for interventions

NASA Astrophysics Data System (ADS)

Hieb, Jeffrey L.; Lyle, Keith B.; Ralston, Patricia A. S.; Chariker, Julia

2015-01-01

At the University of Louisville, a large, urban institution in the south-east United States, undergraduate engineering students take their mathematics courses from the school of engineering. In the fall of their freshman year, engineering students take Engineering Analysis I, a calculus-based engineering analysis course. After the first two weeks of the semester, many students end up leaving Engineering Analysis I and moving to a mathematics intervention course. In an effort to retain more students in Engineering Analysis I, the department collaborated with university academic support services to create a summer intervention programme. Students were targeted for the summer programme based on their score on an algebra readiness exam (ARE). In a previous study, the ARE scores were found to be a significant predictor of retention and performance in Engineering Analysis I. This study continues that work, analysing data from students who entered the engineering school in the fall of 2012. The predictive validity of the ARE was verified, and a hierarchical linear regression model was created using math American College Testing (ACT) scores, ARE scores, summer intervention participation, and several metacognitive and motivational factors as measured by subscales of the Motivated Strategies for Learning Questionnaire. In the regression model, ARE score explained an additional 5.1% of the variation in exam performance in Engineering Analysis I beyond math ACT score. Students took the ARE before and after the summer interventions and scores were significantly higher following the intervention. However, intervention participants nonetheless had lower exam scores in Engineering Analysis I. The following factors related to motivation and learning strategies were found to significantly predict exam scores in Engineering Analysis I: time and study environment management, internal goal orientation, and test anxiety. The adjusted R2 for the full model was 0.42, meaning that the model could explain 42% of the variation in Engineering Analysis I exam scores.

A new experience: the course of ethics in engineering in the Department of Civil Engineering, University of Granada.

PubMed

Gil-Martín, Luisa María; Hernández-Montes, Enrique; Segura-Naya, Armando

2010-06-01

A course in professional ethics for civil engineers was taught for the first time in Spain during the academic year 2007/08. In this paper a survey on the satisfaction and expectation of the course is presented. Surprisingly the students sought moral and ethical principles for their own ordinary lives as well as for their profession. Students were concerned about the law, but in their actions they were more concerned with their conscience, aware that it can be separate from the law.

Persistence of physics and engineering students via peer mentoring, active learning, and intentional advising

NASA Astrophysics Data System (ADS)

McCavit, K.; Zellner, N. E. B.

2016-11-01

Albion College, a private, undergraduate-only, liberal arts college in Michigan, USA, has developed and implemented a low-cost peer-mentoring programme that blends personal and academic support to help students achieve academic success in the introductory courses required for the Physics Major or the Dual-Degree Program in Engineering. This enhanced mentoring programme provides much-needed assistance for undergraduate students to master introductory physics and mathematics coursework, to normalise the struggle of learning hard material, and to accept their identity as physics or engineering students (among other goals). Importantly, this programme has increased retention among entering science, technology, engineering and mathematics students at Albion College as they move through the introductory classes, as shown by a 20% increase in retention from first-semester to third-semester physics courses compared to years when this programme was not in place.

The persistence of Black males in the STEM fields at Texas State University

NASA Astrophysics Data System (ADS)

Day, Beverly Woodson

For the past five years, enrollment in the College of Science and Engineering by first-time undergraduate students has steadily increased. However, retaining the students through their first-year and their persistence to their second year of college and beyond has been problematic. The purpose of this study is to add to the knowledge of why Black students, specifically Black men, are not persisting at Texas State University in the STEM majors. It will also determine if specific factors like the SAT scores, parent's education, high school rank, college GPA, college science and math courses (physics, math, biology and chemistry), college credits earned and average GPA in all science and math college courses predict college preparation and college performance for all students and for Black male students.

Think first job! Preferences and expectations of engineering students in a French `Grande Ecole'

NASA Astrophysics Data System (ADS)

Gerwel Proches, Cecile N.; Chelin, Nathalie; Rouvrais, Siegfried

2018-03-01

A career in engineering may be appealing owing to the prospect of a good salary and a dynamic work environment. There may, however, be challenges for students wishing to enter their first job. In engineering education, career preparation courses may be included so as to prepare students adequately for their first job, future careers, and to reinforce career decision-making skills. This study explored the first-job preferences and expectations of engineering students at a generalist French 'Grande Ecole' before their compulsory internship. The study ultimately provided insight into ways in which future engineers may best be equipped for their first jobs. A qualitative research study was employed, using four focus groups to collect data, which was analysed thematically. Key findings indicate the resolute importance that engineering students place on having a challenging job, teamwork, independence, opportunities for development, and a participative style of being managed. The research findings may be of value in order to renew an engineering curriculum with better alignment between students' expectations and industry needs.

[Master course in biomedical engineering].

PubMed

Jobbágy, Akos; Benyó, Zoltán; Monos, Emil

2009-11-22

The Bologna Declaration aims at harmonizing the European higher education structure. In accordance with the Declaration, biomedical engineering will be offered as a master (MSc) course also in Hungary, from year 2009. Since 1995 biomedical engineering course has been held in cooperation of three universities: Semmelweis University, Budapest Veterinary University, and Budapest University of Technology and Economics. One of the latter's faculties, Faculty of Electrical Engineering and Informatics, has been responsible for the course. Students could start their biomedical engineering studies - usually in parallel with their first degree course - after they collected at least 180 ECTS credits. Consequently, the biomedical engineering course could have been considered as a master course even before the Bologna Declaration. Students had to collect 130 ECTS credits during the six-semester course. This is equivalent to four-semester full-time studies, because during the first three semesters the curriculum required to gain only one third of the usual ECTS credits. The paper gives a survey on the new biomedical engineering master course, briefly summing up also the subjects in the curriculum.

Engineering Ethics Education on the Basis of Continuous Education to Improve Communication Ability

NASA Astrophysics Data System (ADS)

Takahara, Kenji; Kajiwara, Toshinori

The paper proposes the engineering ethics education method for students on the basis of continuous education to improve communication ability. First, through a debate, the students acquire the fundamental skills required to marshal their arguments, to construct the rebuttals and to summarize the debates. Secondly, the students study the fundamental techniques to make a presentation on technical subjects related to electrical engineering. Following these classes, in the lecture of engineering ethics, the students probe the cause of each accident and consider the better means for avoiding such an accident, each other. In most cases, the students can express right and commonsensical opinions from an ethical standpoint. However, they can hardly make judgments when the situations such as the human relations in the above accidents are set concretely. During the engineering ethics class, the students come to know that human relations behind the case make the ethical matters more complicated. Furthermore, they come to understand that facilitating daily communications with co-workers and/or bosses is very important in order to avoid the accidents. The recognition of the students is just the results of the continuous education through three years. It can be said that the engineering ethics education thus constructed makes the students raise such spontaneous awareness and their ethical qualities as engineers.

An Undergraduate Nanotechnology Engineering Laboratory Course on Atomic Force Microscopy

ERIC Educational Resources Information Center

Russo, D.; Fagan, R. D.; Hesjedal, T.

2011-01-01

The University of Waterloo, Waterloo, ON, Canada, is home to North America's first undergraduate program in nanotechnology. As part of the Nanotechnology Engineering degree program, a scanning probe microscopy (SPM)-based laboratory has been developed for students in their fourth year. The one-term laboratory course "Nanoprobing and…

Information Literacy for First-Year Students: An Embedded Curriculum Approach

ERIC Educational Resources Information Center

Andrews, T.; Patil, R.

2007-01-01

The ability to access, evaluate and synthesise high-quality research material is the backbone of critical thinking in academic and professional contexts for Engineers and Industrial Designers. This is the premise upon which teaching and library staff developed Information Literacy (IL) components in Engineering & Industrial Design Practice--a…

Rurality as an Asset for Inclusive Teaching in Chemical Engineering

ERIC Educational Resources Information Center

Gomez, Jamie; Svihla, Vanessa

2018-01-01

We developed and tested a pedagogical strategy--asset-based design challenges--to enhance diversity in early chemical engineering coursework. Using qualitative methods, we found first-year students justified high-cost solutions with ethical arguments; teams that included rural expertise argued instead for economically-viable solutions. In the…

From Petroleum to Penicillin. The First Hundred Years of Modern Chemical Engineering 1859-1959.

ERIC Educational Resources Information Center

Burnett, J. Nicholas

1986-01-01

Describes a chemical engineering course for liberal arts students that is taught from a scientific, social, and symbolic perspective. A summary of the early days of oil refining is included as representative of one of the major content segments of the course. (ML)

Eliciting and characterizing students' mental models within the context of engineering design

NASA Astrophysics Data System (ADS)

Dankenbring, Chelsey

Recently, science education reform documents have called for the incorporation of engineering principles and practices into the K-12 science standards and curriculum. One way this has been done is through the use of engineering design tasks as a way for students to apply their scientific understandings to real-world problems. However, minimal studies have documented students' conceptions within the context of engineering design. Thus, the first chapter of this thesis outlines the steps taken to develop a draw-and-explain item that elicited students' mental models regarding the cause of the four seasons after finishing an engineering design task. Students' mental models regarding the reason for the seasons are also described. The second chapter characterizes students' conceptions regarding sun-Earth relationships, specifically the amount of daylight hours throughout the year, for students who completed either an engineering design task or more traditional learning activities. Results from these studies indicate that draw-and-explain items are an effective way of obtaining students' mental models and that students harbor a variety of alternate conceptions on astronomy related concepts within various learning contexts. Implications from this study include the need for further research regarding how engineering design is used in the classroom and how engineering design facilitates science learning. Also, professional development that allows in-service teachers to gain experience teaching engineering design is needed, as are teacher preparation programs that expose pre-service teachers to engineering design.

Development of an Interactive Mathematics Learning System Based on a Two-Tier Test Diagnostic and Guiding Strategy

ERIC Educational Resources Information Center

Yang, Tzu-Chi; Fu, Hseng-Tz; Hwang, Gwo-Jen; Yang, Stephen J. H.

2017-01-01

Mathematical skills have been recognised as a core competence for engineering and science students. However, learning mathematics has been recognised as a difficult and challenging task for most students, in particular, calculus for first-year students in university. Consequently, the development of effective learning strategies and environments…

Students' Use of the Interactive Whiteboard during Physics Group Work

ERIC Educational Resources Information Center

Mellingsaeter, Magnus Strøm; Bungum, Berit

2015-01-01

This paper presents a case study of how the interactive whiteboard (IWB) may facilitate collective meaning-making processes in group work in engineering education. In the case, first-year students attended group-work sessions as an organised part of a basic physics course at a Norwegian university college. Each student group was equipped with an…

Concept Maps for Evaluating Learning of Sustainable Development

ERIC Educational Resources Information Center

Shallcross, David C.

2016-01-01

Concept maps are used to assess student and cohort learning of sustainable development. The concept maps of 732 first-year engineering students were individually analyzed to detect patterns of learning and areas that were not well understood. Students were given 20 minutes each to prepare a concept map of at least 20 concepts using paper and pen.…

Using the domain identification model to study major and career decision-making processes

NASA Astrophysics Data System (ADS)

Tendhar, Chosang; Singh, Kusum; Jones, Brett D.

2018-03-01

The purpose of this study was to examine the extent to which (1) a domain identification model could be used to predict students' engineering major and career intentions and (2) the MUSIC Model of Motivation components could be used to predict domain identification. The data for this study were collected from first-year engineering students. We used a structural equation model to test the hypothesised relationship between variables in the partial domain identification model. The findings suggested that engineering identification significantly predicted engineering major intentions and career intentions and had the highest effect on those two variables compared to other motivational constructs. Furthermore, results suggested that success, interest, and caring are plausible contributors to students' engineering identification. Overall, there is strong evidence that the domain identification model can be used as a lens to study career decision-making processes in engineering, and potentially, in other fields as well.

Let Students Discover an Important Physical Property of a Slinky

ERIC Educational Resources Information Center

Gash, Philip

2016-01-01

This paper describes a simple experiment that lets first-year physics and engineering students discover an important physical property of a Slinky. The restoring force for the fundamental oscillation frequency is provided only by those coils between the support and the Slinky center of mass.

Software Engineering Frameworks: Textbooks vs. Student Perceptions

ERIC Educational Resources Information Center

McMaster, Kirby; Hadfield, Steven; Wolthuis, Stuart; Sambasivam, Samuel

2012-01-01

This research examines the frameworks used by Computer Science and Information Systems students at the conclusion of their first semester of study of Software Engineering. A questionnaire listing 64 Software Engineering concepts was given to students upon completion of their first Software Engineering course. This survey was given to samples of…

Mentoring for 2000 and beyond

NASA Technical Reports Server (NTRS)

Guerra, K. M.; Farrance, M. A.

1994-01-01

Today, more than 40 percent of the United States workforce are women. However, only a small percentage of working women are employed in science or engineering fields. The numbers of women in engineering and math professions have actually decreased since 1984. Last year, a mentoring program was created at NASA Ames Research Center aimed at encouraging young girls to stay in school, increasing their self confidence and helping them perform better academically. Teachers at the Ronald McNair Intermediate School matched fifth through eighth grade students with women engineers at NASA Ames. Results from a year-end survey submitted by the mentees indicated that the program was successful in achieving its first-year goals; more than one student reported that she felt 'really special' because of her mentor's efforts. The NASA Ames Mentor program has continued into the 1992-93 academic year with both returning mentor/mentee pairs and new participants.

Assessing the Impact of Academic Support: University of the Witwatersrand First-Year Engineering

ERIC Educational Resources Information Center

Onsongo, W. M.

2006-01-01

On average the B.Sc. (Eng.) degree programmes in South Africa universities graduate about 50-60 per cent of the students admitted. Generally, the highest dropout occurs in the first year of registration. This article reviews admission and graduation statistics at the University of the Witwatersrand (Wits) and assesses the impact of recent academic…

An Investigation on Industry-Sponsored Design Projects' Effectiveness at the First-Year Level: Potential Issues and Preliminary Results

ERIC Educational Resources Information Center

Okudan, Gul E.; Mohammed, Susan; Ogot, Madara

2006-01-01

This paper presents the preliminary work for developing guidelines to ensure that industry-sponsored projects in first-year courses aid, not hamper, retention of students. Specifically, the overall research plan includes the following steps: (1) investigating the appropriateness of industry projects in a required introduction to engineering design…

Exploring Biology: A "Vision and Change" Disciplinary First-Year Seminar Improves Academic Performance in Introductory Biology

ERIC Educational Resources Information Center

Wienhold, Caroline J.; Branchaw, Janet

2018-01-01

The transition to college is challenging for most students, especially those who aspire to major in the science, technology, engineering, or mathematics disciplines, in which introductory courses can be large and instruction less than optimal. This paper describes a novel, disciplinary first-year seminar (FYS) course, Exploring Biology, designed…

Teaching ethics to engineers: ethical decision making parallels the engineering design process.

PubMed

Bero, Bridget; Kuhlman, Alana

2011-09-01

In order to fulfill ABET requirements, Northern Arizona University's Civil and Environmental engineering programs incorporate professional ethics in several of its engineering courses. This paper discusses an ethics module in a 3rd year engineering design course that focuses on the design process and technical writing. Engineering students early in their student careers generally possess good black/white critical thinking skills on technical issues. Engineering design is the first time students are exposed to "grey" or multiple possible solution technical problems. To identify and solve these problems, the engineering design process is used. Ethical problems are also "grey" problems and present similar challenges to students. Students need a practical tool for solving these ethical problems. The step-wise engineering design process was used as a model to demonstrate a similar process for ethical situations. The ethical decision making process of Martin and Schinzinger was adapted for parallelism to the design process and presented to students as a step-wise technique for identification of the pertinent ethical issues, relevant moral theories, possible outcomes and a final decision. Students had greatest difficulty identifying the broader, global issues presented in an ethical situation, but by the end of the module, were better able to not only identify the broader issues, but also to more comprehensively assess specific issues, generate solutions and a desired response to the issue.

Does Computer-Aided Formative Assessment Improve Learning Outcomes?

ERIC Educational Resources Information Center

Hannah, John; James, Alex; Williams, Phillipa

2014-01-01

Two first-year engineering mathematics courses used computer-aided assessment (CAA) to provide students with opportunities for formative assessment via a series of weekly quizzes. Most students used the assessment until they achieved very high (>90%) quiz scores. Although there is a positive correlation between these quiz marks and the final…

The Young Engineers and Scientists (YES) mentorship program

NASA Astrophysics Data System (ADS)

Boice, D. C.; Clarac, T.

The Young Engineers and Scientists (YES) Program is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA). It provides talented high school juniors and seniors a bridge between classroom instruction and real-world, research experiences in physical sciences (including space science and astronomy) and engineering. YES consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES has been highly successful during the past 11 years. All YES graduates have entered college, several have worked for SwRI, and three scientific publications have resulted. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors.

The Young Engineers and Scientists Mentorship Program

NASA Astrophysics Data System (ADS)

Boice, D. C.; Lin, C.; Clarac, T.

2004-12-01

The Young Engineers and Scientists (YES) Program is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA). It provides talented high school juniors and seniors a bridge between classroom instruction and real-world, research experiences in physical sciences (including space science and astronomy) and engineering. YES consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES has been highly successful during the past 12 years. All YES graduates have entered college, several have worked for SwRI, and three scientific publications have resulted. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. We acknowledge funding from local charitable foundations and the NASA E/PO program.

Constructing engineers through practice: Gendered features of learning and identity development

NASA Astrophysics Data System (ADS)

Tonso, Karen L.

How do women and men student engineers develop an engineering identity (a sense of belonging, or not), while practicing "actual" engineering? What are the influences of gender, learning and knowledge, relations of power, and conceptions of equality on cultural identity development? I studied these issues in reform-minded engineering design classes, courses organized around teaching students communications, teamwork, and practical engineering. Engineering-student cultural identity categories revealed a status hierarchy, predicated on meeting "academic" criteria for excellence, and the almost total exclusion of women. While working as an engineering colleague on five student teams (three first-year and two senior) and attending their design classes, I documented how cultural identities were made evident and constructed in students' practical engineering. Design projects promoted linking academic knowledge with real-world situations, sharing responsibilities and trusting colleagues, communicating engineering knowledge to technical and non-technical members of business communities, and addressing gaps in students' knowledge. With a curriculum analysis and survey of students' perceptions of the differences between design and conventional courses, I embedded the design classes in the wider campus and found that: (1) Engineering education conferred prestige, power, and well-paying jobs on students who performed "academic" engineering, while failing to adequately encourage "actual" engineering practices. High-status student engineers were the least likely to perform "actual" engineering in design teams. (2) Engineering education advanced an ideology that encouraged its practitioners to consider men's privilege and women's invisibility normal. By making "acting like men act" the standards to which engineering students must conform, women learned to put up with oppressive treatment. Women's accepting their own mistreatment and hiding their womanhood became a condition of women's belonging. (3) Despite all of the pressures to do otherwise, (some) teams of students (at all levels) carved out small oases where "actual" engineering prevailed and women's participation was robust. Students--not faculty, not progressive pedagogy, not "reformed" courses--disrupted prevailing norms. However, two women engineering students, one on each senior team, performed fabulous "actual" engineering, yet neither of them had a job when they graduated--the only two senior students on my teams without jobs.

Connections Between Future Time Perspectives and Self-Regulated Learning for Mid-Year Engineering Students: A Multiple Case Study

NASA Astrophysics Data System (ADS)

Chasmar, Justine

This dissertation presents multiple studies with the purpose of understanding the connections between undergraduate engineering students' motivations, specifically students' Future Time Perspectives (FTPs) and Self-Regulated Learning (SRL). FTP refers to the views students hold about the future and how their perceptions of current tasks are affected by these views. SRL connects the behaviors, metacognition, and motivation of students in their learning. The goals of this research project were to 1) qualitatively describe and document engineering students' SRL strategies, 2) examine interactions between engineering students' FTPs and SRL strategy use, and 3) explore goal-setting as a bridge between FTP and SRL. In an exploratory qualitative study with mid-year industrial engineering students to examine the SRL strategies used before and after an SRL intervention, results showed that students intended to use more SRL strategies than they attempted. However, students self-reported using new SRL strategies from the intervention. Students in this population also completed a survey and a single interview about FTP and SRL. Results showed perceptions of instrumentality of coursework and skills as motivation for using SRL strategies, and a varied use of SRL strategies for students with different FTPs. Overall, three types of student FTP were seen: students with a single realistic view of the future, conflicting ideal and realistic future views, or open views of the future. A sequential explanatory mixed methods study was conducted with mid-year students from multiple engineering majors. First a cluster analysis of survey results of FTP items compared to FTP interview responses was used for participant selection. Then a multiple case study was conducted with data collected through surveys, journal entries, course performance, and two interviews. Results showed that students with a well-defined FTP self-regulated in the present based on their varied perceptions of instrumentality for their present tasks and evaluated and adapted their SRL strategies based on grades. Students with conflicting perceptions of the future used a high level of SRL in courses related to both conflicting future paths or related to their short-term goals. Students with open views had high SRL in most of their courses due to a high perception of instrumentality for their present courses. Implications for practice include use of a context-based SRL intervention to teach effective learning strategies, a shift of key general education courses to earlier in the engineering curriculum, and utilization of career-focused problems to support student FTP development and stress the importance of course content in future engineering careers.

Introducing Whole-Systems Design to First-Year Engineering Students with Case Studies

ERIC Educational Resources Information Center

Blizzard, Jackie; Klotz, Leidy; Pradhan, Alok; Dukes, Michael

2012-01-01

Purpose: A whole-systems approach, which seeks to optimize an entire system for multiple benefits, not isolated components for single benefits, is essential to engineering design for radically improved sustainability performance. Based on real-world applications of whole-systems design, the Rocky Mountain Institute (RMI) is developing educational…

The Potential of Supplemental Instruction in Engineering Education--Helping New Students to Adjust to and Succeed in University Studies

ERIC Educational Resources Information Center

Malm, Joakim; Bryngfors, Leif; Mörner, Lise-Lotte

2015-01-01

Supplemental Instruction (SI) is a programme that is attached to difficult courses with the objective of increasing student performance and retention. However, an SI programme also has the potential to increase overall student performance and retention during the first critical year if applied to introductory courses. In this study the latter…

Self-Image and Expectations of First Year Engineering Students in a Brazilian University.

ERIC Educational Resources Information Center

de Campos, Reinaldo Calixto; Grinberg, Patricia; Garcia, Ivan; Parise, Jose Alberto; da Silveira, Marcos Azevedo; Dumont, Ney

This paper is an attempt to comprehend, in a more objective way, the students undertaking the second semester at the Technical and Scientific Center from the Pontifical Catholic University of Rio de Janeiro (PUC-Rio). The research was carried out at the beginning of the semester, in one of the classes formed by students undertaking General…

The positive effects of the FIRST high school robotics program

NASA Astrophysics Data System (ADS)

McIntyre, Nancy

The essence of the FIRST Robotics Program comes from the explanation of the acronym, which means For Inspiration and Recognition in Science and Technology. Their vision is to inspire young people, their schools, and communities, an appreciation of science and technology and an understanding that mastering these can enrich the lives of all. Last year I began our school's association with this program. I secured funding from NASA/JPL, attended a workshop and kickoff event, encouraged a team of students, parents, community members, and engineers to come together to design and construct a working, competitive robot in a six week time span. This year I expanded our participation to our 6th grade students. They competed in the FIRST Lego League. As part of my 9th grade science curriculum my students designed and built Panda II in class. The after-school team will submit a 30 second animation, an autocad design, and a team website for competition as well. Our AP art students have been charged with painting our travel crate. I couldn't have been successful without the help and support of a very dedicated JPL engineer who volunteers his time to come to our school to teach our team the technical components.

Motivating first-year university students by interdisciplinary study projects

NASA Astrophysics Data System (ADS)

Koch, Franziska D.; Dirsch-Weigand, Andrea; Awolin, Malte; Pinkelman, Rebecca J.; Hampe, Manfred J.

2017-01-01

In order to increase student commitment from the beginning of students' university careers, the Technische Universität Darmstadt has introduced interdisciplinary study projects involving first-year students from the engineering, natural, social and history, economics and/or human sciences departments. The didactic concept includes sophisticated task design, individual responsibility and a differentiated support system. Using a self-determination theory framework, this study examined the effects of the projects based on survey findings from two projects with more than 1000 students. The results showed that the projects were successful in fulfilling students' basic psychological needs and in promoting students' academic engagement. Basic psychological needs were found to be significant predictors of academic engagement. These findings suggest that interdisciplinary study projects can potentially contribute to improving higher education as they fulfil students' basic psychological needs for competence, relatedness and autonomy and enhance students' academic engagement.

Female peer mentors early in college increase women’s positive academic experiences and retention in engineering

PubMed Central

Dasgupta, Nilanjana

2017-01-01

Scientific and engineering innovation is vital for American competitiveness, quality of life, and national security. However, too few American students, especially women, pursue these fields. Although this problem has attracted enormous attention, rigorously tested interventions outside artificial laboratory settings are quite rare. To address this gap, we conducted a longitudinal field experiment investigating the effect of peer mentoring on women’s experiences and retention in engineering during college transition, assessing its impact for 1 y while mentoring was active, and an additional 1 y after mentoring had ended. Incoming women engineering students (n = 150) were randomly assigned to female or male peer mentors or no mentors for 1 y. Their experiences were assessed multiple times during the intervention year and 1-y postintervention. Female (but not male) mentors protected women’s belonging in engineering, self-efficacy, motivation, retention in engineering majors, and postcollege engineering aspirations. Counter to common assumptions, better engineering grades were not associated with more retention or career aspirations in engineering in the first year of college. Notably, increased belonging and self-efficacy were significantly associated with more retention and career aspirations. The benefits of peer mentoring endured long after the intervention had ended, inoculating women for the first 2 y of college—the window of greatest attrition from science, technology, engineering, and mathematics (STEM) majors. Thus, same-gender peer mentoring for a short period during developmental transition points promotes women’s success and retention in engineering, yielding dividends over time. PMID:28533360

Female peer mentors early in college increase women's positive academic experiences and retention in engineering.

PubMed

Dennehy, Tara C; Dasgupta, Nilanjana

2017-06-06

Scientific and engineering innovation is vital for American competitiveness, quality of life, and national security. However, too few American students, especially women, pursue these fields. Although this problem has attracted enormous attention, rigorously tested interventions outside artificial laboratory settings are quite rare. To address this gap, we conducted a longitudinal field experiment investigating the effect of peer mentoring on women's experiences and retention in engineering during college transition, assessing its impact for 1 y while mentoring was active, and an additional 1 y after mentoring had ended. Incoming women engineering students ( n = 150) were randomly assigned to female or male peer mentors or no mentors for 1 y. Their experiences were assessed multiple times during the intervention year and 1-y postintervention. Female (but not male) mentors protected women's belonging in engineering, self-efficacy, motivation, retention in engineering majors, and postcollege engineering aspirations. Counter to common assumptions, better engineering grades were not associated with more retention or career aspirations in engineering in the first year of college. Notably, increased belonging and self-efficacy were significantly associated with more retention and career aspirations. The benefits of peer mentoring endured long after the intervention had ended, inoculating women for the first 2 y of college-the window of greatest attrition from science, technology, engineering, and mathematics (STEM) majors. Thus, same-gender peer mentoring for a short period during developmental transition points promotes women's success and retention in engineering, yielding dividends over time.

YES 2K6: A mentorship program for young engineers and scientists

NASA Astrophysics Data System (ADS)

Boice, D. C.; Asbell, H. E.

The Young Engineers and Scientists 2006 YES 2K6 Program is a community partnership between Southwest Research Institute SwRI and local high schools in San Antonio Texas USA YES has been highly successful during the past 14 years and YES 2K6 continues this trend This program provides talented high school juniors and seniors a bridge between classroom instruction and real world research experiences in physical sciences including space science and astronomy and engineering YES 2K6 consists of two parts 1 an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand develop skills and acquire tools for solving scientific problems attend mini-courses and seminars on electronics computers and the Internet careers science ethics and other topics and select individual research projects to be completed during the academic year and 2 a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit At the end of the school year students publicly present and display their work acknowledging their accomplishments and spreading career awareness to other students and teachers YES 2K6 developed a website for the Magnetospheric Multiscale Mission MMS from the perspective of high school students Over the past 14 years all YES graduates have entered college several have worked for SwRI and three scientific publications have resulted Student evaluations indicate the effectiveness of YES on

Integrating undergraduate research into the electro-optics and laser engineering technology program at Indiana University of Pennsylvania

NASA Astrophysics Data System (ADS)

Zhou, Andrew F.

2014-07-01

Bringing research into an undergraduate curriculum is a proven and powerful practice with many educational benefits to students and the professional rewards to faculty mentors. In recent years, undergraduate research has gained national prominence as an effective problem-based learning strategy. Developing and sustaining a vibrant undergraduate research program of high quality and productivity is an outstanding example of the problem-based learning. To foster student understanding of the content learned in the classroom and nurture enduring problem-solving and critical-thinking abilities, we have created a collaborative learning environment by building research into the Electro-Optics curriculum for the first- and second-year students. The teaching methodology is described and examples of the research projects are given. Such a research-integrated curriculum effectively enhances student learning and critical thinking skills, and strengthens the research culture for the first- and second-year students.

Turbulence

NASA Astrophysics Data System (ADS)

Frisch, Uriel

1996-01-01

Written five centuries after the first studies of Leonardo da Vinci and half a century after A.N. Kolmogorov's first attempt to predict the properties of flow, this textbook presents a modern account of turbulence, one of the greatest challenges in physics. "Fully developed turbulence" is ubiquitous in both cosmic and natural environments, in engineering applications and in everyday life. Elementary presentations of dynamical systems ideas, probabilistic methods (including the theory of large deviations) and fractal geometry make this a self-contained textbook. This is the first book on turbulence to use modern ideas from chaos and symmetry breaking. The book will appeal to first-year graduate students in mathematics, physics, astrophysics, geosciences and engineering, as well as professional scientists and engineers.

Young Engineers and Scientists (YES 2K6): Independent and Group Mentorship Projects

NASA Astrophysics Data System (ADS)

Boice, D. C.; Asbell, H. E.

2006-12-01

The Young Engineers and Scientists (YES) Program is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA). YES has been highly successful during the past 14 years, and YES 2K6 continued this trend. It provides talented high school juniors and seniors a bridge between classroom instruction and real-world, research experiences in physical sciences and engineering. YES 2K6 consists of two parts: 1) a three-week summer workshop and 2) a mentorship where students complete individual research projects during their academic year. The intensive workshop is held at SwRI where students experience the research environment first-hand. They also develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year. YES 2K6 students developed a website for the Magnetospheric Multiscale (MMS) Mission from the perspective of a high school student. The collegial mentorship takes place during their academic year where students complete individual research projects under the guidance of their mentors and earn honors credit. At the end of the school year, students publicly present and display their work at their schools. This acknowledges their accomplishments and spreads career awareness to other students and teachers. Over the past 14 years, all YES graduates have entered college, several have worked for SwRI, and three scientific publications have resulted. Student evaluations indicate the benefits of YES for their academic preparation and choice of college majors. We acknowledge E/PO funding from the NASA MMS Mission and local charitable foundations.

ACE

NASA Technical Reports Server (NTRS)

Lumia, R.

1999-01-01

This document describes the progress made during the fourth year of the Center for Autonomous Control Engineering (ACE). We currently support 30 graduate students, 52 undergraduate students, 9 faculty members, and 4 staff members. Progress will be divided into two categories. The first category explores progress for ACE in general. The second describes the results of each specific project supported within ACE.

From Human Activity to Conceptual Understanding of the Chain Rule

ERIC Educational Resources Information Center

Jojo, Zingiswa Mybert Monica; Maharaj, Aneshkumar; Brijlall, Deonarain

2013-01-01

This article reports on a study which investigated first year university engineering students' construction of the definition of the concept of the chain rule in differential calculus at a University of Technology in South Africa. An APOS (Action-Process-Objects-Schema) approach was used to explore conceptual understanding displayed by students in…

Spatial Ability Learning through Educational Robotics

ERIC Educational Resources Information Center

Julià, Carme; Antolí, Juan Òscar

2016-01-01

Several authors insist on the importance of students' acquisition of spatial abilities and visualization in order to have academic success in areas such as science, technology or engineering. This paper proposes to discuss and analyse the use of educational robotics to develop spatial abilities in 12 year old students. First of all, a course to…

Knowledge Creation and Innovation in a Civil Engineering Course for the First-Year University Students

ERIC Educational Resources Information Center

Salmisto, Alpo; Nokelainen, Petri

2015-01-01

This article examines the application of knowledge creation learning and innovation to higher education in construction. The objectives are to demonstrate the application of the course based on knowledge creation learning to mass teaching and to analyse whether knowledge creation learning improves student motivation and learning. The empirical…

Robotics Team Lights Up New Year's Eve

ERIC Educational Resources Information Center

LeBlanc, Cheryl

2011-01-01

A robotics team from Muncie, Indiana--the PhyXTGears--is made up of high school students from throughout Delaware County. The group formed as part of the FIRST Robotics program (For Inspiration and Recognition of Science and Technology), an international program founded by inventor Dean Kamen in which students work with professional engineers and…

Planning and Implementing a Comprehensive Student-Centered Research Program for First-Year STEM Undergraduates

ERIC Educational Resources Information Center

Schneider, Kimberly R.; Bickel, Amelia; Morrison-Shetlar, Alison

2015-01-01

Retaining college-level science, technology, engineering, and mathematics (STEM) students remains a priority in higher education. A variety of methods have been shown to increase retention, including mentorship, tutoring, course enhancements, community building, and engagement in high-impact practices such as undergraduate research. In 2011, an…

First-year engineering students' use of their mathematics textbook - opportunities and constraints

NASA Astrophysics Data System (ADS)

Randahl, Mira

2012-09-01

The role of the mathematics textbook at tertiary level has received limited exposure in previous research although it is likely that students work individually and that some of this work depends on the use of the textbook. The aim of this study was to investigate the process of approaching the textbook from epistemological, cognitive, and didactical perspectives. The focus was on identifying and discussing the opportunities and constraints in the process. The study was an explorative case study and the participants were first-year engineering students taking a basic calculus course. The data were collected through questionnaires, observations, and interviews. Results showed that the textbook was used to a very low degree and mainly perceived as a source of tasks. Different opportunities and constraints are pointed out and some didactical implications are suggested. The results and discussion indicate that a need for greater awareness about the use of mathematical textbooks in meaningful ways at tertiary level.

Students' perceptions of the relevance of mathematics in engineering

NASA Astrophysics Data System (ADS)

Flegg, Jennifer; Mallet, Dann; Lupton, Mandy

2012-09-01

In this article, we report on the findings of an exploratory study into the experience of students as they learn first year engineering mathematics. Here we define engineering as the application of mathematics and sciences to the building and design of projects for the use of society [M. Kirschenman and B. Brenner, Education for Civil Engineering: A Profession of Practice, Leader. Manag. Eng. 10 (2010), p. 54]. Qualitative and quantitative data on students' views of the relevance of their mathematics study to their engineering studies and future careers in engineering was collected. The students described using a range of mathematics techniques (mathematics skills developed, mathematics concepts applied to engineering and skills developed relevant for engineering) for various usages (as a subject of study, a tool for other subjects or a tool for real world problems). We found a number of themes relating to the design of engineering mathematics curriculum emerged from the data. These included the relevance of mathematics within different engineering majors, the relevance of mathematics to future studies, the relevance of learning mathematical rigour and the effectiveness of problem-solving tasks in conveying the relevance of mathematics more effectively than other forms of assessment. We make recommendations for the design of engineering mathematics curriculum based on our findings.

Young Engineers and Sciences (YES) - Mentoring High School Students

NASA Astrophysics Data System (ADS)

Boice, Daniel C.; Asbell, E.; Reiff, P. H.

2008-09-01

Young Engineers and Scientists (YES) is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA) during the past 16 years. The YES program provides talented high school juniors and seniors a bridge between classroom instruction and real world, research experiences in physical sciences (including space science) and engineering. YES consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. During these years, YES has developed a website for topics in space science from the perspective of high school students, including NASA's Magnetospheric Multiscale Mission (MMS) (http://yesserver.space.swri.edu). High school science teachers participate in the workshop and develop space-related lessons for classroom presentation in the academic year. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. Over the past 16 years, all YES graduates have entered college, several have worked for SwRI, one business has started, and three scientific publications have resulted. Acknowledgements. We acknowledge funding and support from the NASA MMS Mission, Texas Space Grant Consortium, Northside Independent School District, SwRI, and several local charitable foundations.

Automatic Evaluation of Practices in Moodle for Self Learning in Engineering

ERIC Educational Resources Information Center

Sánchez, Carles; Ramos, Oriol; Márquez, Patricia; Marti, Enric; Rocarias, Jaume; Gil, Debora

2015-01-01

The first years in engineering degree courses are usually made of large groups with a low teacher-student ratio. Overcrowding in classrooms hinders continuous assessment much needed to promote independent learning. Therefore, there is a need to apply some kind of automatic evaluation to facilitate the correction of exercises outside the classroom.…

Undergraduate Engineering--A Comparative Study of First Year Performance in Single Gender Campuses

ERIC Educational Resources Information Center

Dana-Picard, Thierry; Kidron, Ivy; Komar, Meir; Steiner, Joseph

2005-01-01

The Jerusalem College of Technology is an institution for higher education in Israel, where the majority of the students study towards an undergraduate degree in Engineering (Electronics, Applied Optics, Computers, etc.). The studies are held on three different campuses, one campus for men and two for women. We describe the organization of the…

The Fender Stratocaster Electric Guitar: A Case Study for both Nontransferable and Transferable Skills Learning in a Generalist Electronic Engineering Cohort

ERIC Educational Resources Information Center

Joyce, M. J.

2010-01-01

A case-study approach to teaching electronics system design that has been used since 2004 to demonstrate the importance of both nontransferable and transferable design issues to first-year undergraduate students is described. The student cohort of relevance to this work represents a diverse group comprising both students studying for a four-year…

Engaging Students in Space Research: Young Engineers and Scientists 2008

NASA Astrophysics Data System (ADS)

Boice, D. C.; Asbell, H. E.; Reiff, P. H.

2008-12-01

Young Engineers and Scientists (YES) is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA) during the past 16 years. The YES program provides talented high school juniors and seniors a bridge between classroom instruction and real world, research experiences in physical sciences (including space science) and engineering. YES consists of an intensive three-week summer workshop held at SwRI and a collegial mentorship where students complete individual research projects under the guidance of their professional mentors during the academic year. During the summer workshop, students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES has developed a website for topics in space science from the perspective of high school students, including NASA's Magnetospheric Multiscale Mission (MMS) (http://yesserver.space.swri.edu). Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. Over the past 16 years, all YES graduates have entered college, several have worked for SwRI, one business has started, and three scientific publications have resulted. Acknowledgements. We acknowledge funding and support from the NASA MMS Mission, Texas Space Grant Consortium, Northside Independent School District, SwRI, and several local charitable foundations.

Women in science & engineering scholarships and summer camp outreach programs : year 7.

DOT National Transportation Integrated Search

2014-08-01

Since the UTC Scholarship program began in the spring of 2005 and continues today on the S&T campus, numerous female students : have benefitted tremendously from this source of financial aid. The program began in the first few years with 15-30 awards...

Preparing the entry-level materials professional in the 1990s

NASA Astrophysics Data System (ADS)

Geiger, Gordon H.

1989-05-01

It is time that universities stop using the excuse that industry does not want a five-year-engineering-degree graduate. Industry does not have any choice since it can only select from the available talent pool. At present, materials graduates with four-year degrees often lack the critical tools necessary to perform the non-engineering jobs that are frequently offered. Courses such as statistics, process control and management will help remedy this situation. Today, the individual with a master of science degree, having spent over five years in school, still lacks many essential non-engineering skills. Worse, many students in master's degree programs graduate with a primarily science background and have not taken the full basic engineering curriculum. For this reason, there is no comparison between the current, research-oriented M.S. degree and the proposed master of engineering degree. The outlined curriculum allows for a continuation of many current programs in materials while providing a transition to a five-year, first professional degree. The program allows the student to choose, after four years of education, whether he or she really wants to obtain a professional degree. Further, the four-year degree recipient enters the field with a better education than is available at present, and industry is supplied with a better-educated mix of degree recipients.

Think First Job! Preferences and Expectations of Engineering Students in a French 'Grande Ecole'

ERIC Educational Resources Information Center

Gerwel Proches, Cecile N.; Chelin, Nathalie; Rouvrais, Siegfried

2018-01-01

A career in engineering may be appealing owing to the prospect of a good salary and a dynamic work environment. There may, however, be challenges for students wishing to enter their first job. In engineering education, career preparation courses may be included so as to prepare students adequately for their first job, future careers, and to…

The Design of a Primary Flight Trainer using Concurrent Engineering Concepts

NASA Technical Reports Server (NTRS)

Ladesic, James G.; Eastlake, Charles N.; Kietzmann, Nicholas H.

1993-01-01

Concurrent Engineering (CE) concepts seek to coordinate the expertise of various disciplines from initial design configuration selection through product disposal so that cost efficient design solutions may be achieve. Integrating this methodology into an undergraduate design course sequence may provide a needed enhancement to engineering education. The Advanced Design Program (ADP) project at Embry-Riddle Aeronautical University (EMU) is focused on developing recommendations for the general aviation Primary Flight Trainer (PFT) of the twenty first century using methods of CE. This project, over the next two years, will continue synthesizing the collective knowledge of teams composed of engineering students along with students from other degree programs, their faculty, and key industry representatives. During the past year (Phase I). conventional trainer configurations that comply with current regulations and existing technologies have been evaluated. Phase I efforts have resulted in two baseline concepts, a high-wing, conventional design named Triton and a low-wing, mid-engine configuration called Viper. In the second and third years (Phases II and III). applications of advanced propulsion, advanced materials, and unconventional airplane configurations along with military and commercial technologies which are anticipated to be within the economic range of general aviation by the year 2000, will be considered.

The Young Engineers and Scientists (YES) Mentorship Program

NASA Astrophysics Data System (ADS)

Boice, D. C.; Clarac, T.; Lin, C.

2004-11-01

The Young Engineers and Scientists (YES) Program is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA). It provides talented high school juniors and seniors a bridge between classroom instruction and real-world, research experiences in physical sciences (including space science and astronomy) and engineering. YES consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES has been highly successful during the past 11 years. All YES graduates have entered college, several have worked for SwRI, and three scientific publications have resulted. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. We acknowledge funding from local charitable foundations and the NASA E/PO program.

The Young Engineers and Scientists Mentorship Program

NASA Astrophysics Data System (ADS)

Boice, D. C.; Jahn, J.; Hummel, P.

2003-12-01

The Young Engineers and Scientists (YES) Program is a ommunity partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA). It provides talented high school juniors and seniors a bridge between classroom instruction and real-world, research experiences in physical sciences (including space science and astronomy) and engineering. YES consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES has been highly successful during the past 10 years. All YES graduates have entered college, several have worked for SwRI, and three scientific publications have resulted. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. We gratefully acknowledge partial funding for the YES Program from a NASA EPO grant.

Hey kid! Wanna build a loudspeaker? The first one's free

NASA Astrophysics Data System (ADS)

Garrett, Steven

2005-09-01

In 2000, Penn State University instituted a First Year Seminar (FYS) requirement for every entering undergraduate student. This paper describes a hands-on FYS on audio engineering that has each freshman, in a class of 20, construct and test a two-way loudspeaker system during eight 2-hour meetings. Time and resource constraints dictated that the speaker system must be assembled using only hand tools and characterized using only an oscillator and digital multimeters. Due to limitations on the funds made available for each FYS by the College of Engineering, the total cost of entire system could not exceed $65/side. Each student is provided with a woofer, tweeter, crossover components, and enclosure parts to build one speaker system. The students are offered the option of purchasing a second set of parts for $65 so that they can complete the course with a stereo pair. Ninety percent of the students exercise the stereo option. This presentation will describe the speaker system, using an enclosure made primarily from PVC plumbing parts, and the four laboratory exercises that the students perform and write up that are designed to introduce basic engineering concepts including graphing, electrical impedance, resonance, transfer functions, mechanical and gas stiffness, and nondestructive parameter measurement.

An engineering dilemma: sustainability in the eyes of future technology professionals.

PubMed

Haase, S

2013-09-01

The ability to design technological solutions that address sustainability is considered pivotal to the future of the planet and its people. As technology professionals engineers are expected to play an important role in sustaining society. The present article aims at exploring sustainability concepts of newly enrolled engineering students in Denmark. Their understandings of sustainability and the role they ascribe to sustainability in their future professional practice is investigated by means of a critical discourse analysis including metaphor analysis and semiotic analysis. The sustainability construal is considered to delimit possible ways of dealing with the concept in practice along the engineering education pathway and in professional problem solving. Five different metaphors used by the engineering students to illustrate sustainability are identified, and their different connotative and interpretive implications are discussed. It is found that sustainability represents a dilemma to the engineering students that situates them in a tension between their technology fascination and the blame they find that technological progress bears. Their sustainability descriptions are collected as part of a survey containing among other questions one open-ended, qualitative question on sustainability. The survey covers an entire year group of Danish engineering students in the first month of their degree study.

High-performance composite chocolate

NASA Astrophysics Data System (ADS)

Dean, Julian; Thomson, Katrin; Hollands, Lisa; Bates, Joanna; Carter, Melvyn; Freeman, Colin; Kapranos, Plato; Goodall, Russell

2013-07-01

The performance of any engineering component depends on and is limited by the properties of the material from which it is fabricated. It is crucial for engineering students to understand these material properties, interpret them and select the right material for the right application. In this paper we present a new method to engage students with the material selection process. In a competition-based practical, first-year undergraduate students design, cost and cast composite chocolate samples to maximize a particular performance criterion. The same activity could be adapted for any level of education to introduce the subject of materials properties and their effects on the material chosen for specific applications.

Scaling Up: Adapting a Phage-Hunting Course to Increase Participation of First-Year Students in Research

PubMed Central

Staub, Nancy L.; Poxleitner, Marianne; Braley, Amanda; Smith-Flores, Helen; Pribbenow, Christine M.; Jaworski, Leslie; Lopatto, David; Anders, Kirk R.

2016-01-01

Authentic research experiences are valuable components of effective undergraduate education. Research experiences during the first years of college are especially critical to increase persistence in science, technology, engineering, and mathematics fields. The Science Education Alliance Phage Hunters Advancing Genomics and Evolutionary Science (SEA-PHAGES) model provides a high-impact research experience to first-year students but is usually available to a limited number of students, and its implementation is costly in faculty time and laboratory space. To offer a research experience to all students taking introductory biology at Gonzaga University (n = 350/yr), we modified the traditional two-semester SEA-PHAGES course by streamlining the first-semester Phage Discovery lab and integrating the second SEA-PHAGES semester into other courses in the biology curriculum. Because most students in the introductory course are not biology majors, the Phage Discovery semester may be their only encounter with research. To discover whether students benefit from the first semester alone, we assessed the effects of the one-semester Phage Discovery course on students’ understanding of course content. Specifically, students showed improvement in knowledge of bacteriophages, lab math skills, and understanding experimental design and interpretation. They also reported learning gains and benefits comparable with other course-based research experiences. Responses to open-ended questions suggest that students experienced this course as a true undergraduate research experience. PMID:27146160

A Reflexive Approach to Interview Data in an Investigation of Argument

ERIC Educational Resources Information Center

Mitchell, Sally; Prior, Paul; Bilbro, Rebecca; Peake, Kelly; See, Beng Huat; Andrews, Richard

2008-01-01

As part of an exploratory study at three universities (two in the UK and one in the USA) of how first-year students in three disciplines (biology, electrical engineering and history) learn to argue, we conducted interviews (individual and group) with university faculty and students about the place of argument in their teaching and learning. Here…

University Students' Strategies for Constructing Hypothesis When Tackling Paper-and-Pencil Tasks in Physics

ERIC Educational Resources Information Center

Guisasola, Jenaro; Ceberio, Mikel; Zubimendi, Jose Luis

2006-01-01

The study we present tries to explore how first year engineering students formulate hypotheses in order to construct their own problem solving structure when confronted with problems in physics. Under the constructivistic perspective of the teaching-learning process, the formulation of hypotheses plays a key role in contrasting the coherence of…

College Admissions and Academic Ethic: How Context-Specific Evaluation within a Science-Based Compensatory Program Benefits African American Students

ERIC Educational Resources Information Center

Wooten, Melissa E.

2016-01-01

This study investigates how the college readiness of participants in a compensatory program designed to facilitate interest in science and engineering was determined. Archival data were used to qualitatively analyze the performance reports of 205 student participants during the compensatory program's first 5 years. Findings indicate participants…

Using Continuous Assessment to Promote Student Engagement in a Large Class

ERIC Educational Resources Information Center

Cole, Jonathan S.; Spence, Stephen W. T.

2012-01-01

The authors have developed a first-year fluids course for a class of around 230 aerospace, civil and mechanical engineering students. This paper aims to show how the teaching and assessment methodology was applied to the challenge of a large class. The lectures featured formal teaching interspersed with active learning elements. Smaller group…

Enhancing Force Concept Inventory Diagnostics to Identify Dominant Misconceptions in First-Year Engineering Physics

ERIC Educational Resources Information Center

Martin-Blas, Teresa; Seidel, Luis; Serrano-Fernandez, Ana

2010-01-01

This work presents the results of a study whose aim is to detect systematic errors about the concept of force among freshmen students. The researchers analysed the results of the Force Concept Inventory test, which was administered to two different groups of students. The results show that, although there were significant performance variations…

The Graduate Experience in Engineering and the Physical Sciences: Gender and Ethnic Differences in Initial Expectations and Departmental Incorporation.

ERIC Educational Resources Information Center

Santiago, Anna M.; Einarson, Marne K.

This study examined the relative impact of both student-driven and institutional factors on anticipated academic and career outcomes among first-year graduate students. The study addressed two primary questions: (1) whether significant gender and ethnic differences exist in the academic credentials, expectations, and degree of incorporation within…

Introducing Gyroscopes Quantitatively without Putting Students into a Spin

ERIC Educational Resources Information Center

McGlynn, Enda

2007-01-01

The uniform precession of a simple form of gyroscope is analysed via a direct application of Newton's laws, using only concepts generally taught to physics and engineering students in the first two years of an undergraduate programme, with an emphasis on understanding the forces and torques acting on the system. This type of approach, in the…

First-Year Engineering Students' Use of Their Mathematics Textbook--Opportunities and Constraints

ERIC Educational Resources Information Center

Randahl, Mira

2012-01-01

The role of the mathematics textbook at tertiary level has received limited exposure in previous research although it is likely that students work individually and that some of this work depends on the use of the textbook. The aim of this study was to investigate the process of approaching the textbook from epistemological, cognitive, and…

Sundials in the shade: A study of women's persistence in the first year of a computer science program in a selective university

NASA Astrophysics Data System (ADS)

Powell, Rita Manco

Currently women are underrepresented in departments of computer science, making up approximately 18% of the undergraduate enrollment in selective universities. Most attrition in computer science occurs early in this major, in the freshman and sophomore years, and women drop out in disproportionately greater numbers than their male counterparts. Taking an ethnographic approach to investigating women's experiences and progress in the first year courses in the computer science major at the University of Pennsylvania, this study examined the pre-college influences that led these women to the major and the nature of their experiences in and outside of class with faculty, peers, and academic support services. This study sought an understanding of the challenges these women faced in the first year of the major with the goal of informing institutional practice about how to best support their persistence. The research reviewed for this study included patterns of leaving majors in science, math and engineering (Seymour & Hewitt 1997), the high school preparation needed to pursue math and engineering majors in college (Strenta, Elliott, Adair, Matier, & Scott, 1994), and intervention programs that have positively impacted persistence of women in computer science (Margolis & Fisher, 2002). The research method of this study employed a series of personal interviews over the course of one calendar year with fourteen first year women who had either declared on intended to declare the computer science major in the School of Engineering and Applied Science at the University of Pennsylvania. Other data sources were focus groups and personal interviews with faculty, administrators, admissions and student life professionals, teaching assistants, female graduate students, and male first year students at the University of Pennsylvania. This study found that the women in this study group came to the University of Pennsylvania with a thorough grounding in mathematics, but many either had an inadequate background in computer science, or at least perceived inadequacies in their background, which prevented them from beginning the major on an equal footing with their mostly male peers and caused some to lose confidence and consequently interest in the major. Issues also emanated from their gender-minority status in the Computer and Information Science Department, causing them to be socially isolated from their peers and further weakening their resolve to persist. These findings suggest that female first year students could benefit from multiple pathways into the major designed for students with varying degrees of prior experience with computer science. In addition, a computer science community within the department characterized by more frequent interaction and collaboration with faculty and peers could positively impact women's persistence in the major.

Increasing student confidence in technical and professional skills through project based learning

NASA Astrophysics Data System (ADS)

Robinson, Alice L.

This work focuses on developing undergraduate students' technical and professional skills through a project-based spiral curriculum in the Agricultural & Biological Engineering department at Purdue that can be implemented campus wide. Through this curriculum, Purdue engineers will be prepared for leadership roles in responding to the global technological, economic, and societal challenges of the 21st century by exposure to the relationships between engineering and its impacts on real world needs and challenges. Project-based learning uses projects as the focus of instruction and has shown increased understanding, motivation, and confidence through application of engineering principles to real-world problems. The strength of a spiral curriculum is that it continually revisits basic ideas and themes with increasing complexity and sophistication. The proposed spiral curriculum incorporates the target attributes of the Purdue Engineer of 2020 through project based courses during sophomore, junior, and senior year. These courses will build on concepts taught during first year engineering as well. The Engineer of 2020 (NAE and Purdue) target attributes include strong technical and professional skills to solve societal and technological burdens. A prototype course has been developed, taught, and evaluated during the previous two fall semesters in the sophomore level of the Biological and Food Process Engineering curriculum. The target students met 3 hours a week in a traditional lecture setting plus 2 hours a week in a project based lab setting. The control group met only 3 hours a week in a traditional lecture setting. Peer and self assessment results from student surveys show increased confidence in every area surveyed. Focus groups revealed student reactions to the course. Students enjoyed the course but felt it difficult to handle ambiguity with project work. Future work includes course revisions to the content, assessment, and pedagogy of the prototype class, development of the remaining project courses in the curriculum, and increasing graduate student instruction in the courses to gain teaching and leadership experience.

Non Directed Utilization of a Hand Held Device: How Does a First Year University Engineering Student Use an iTouch?

ERIC Educational Resources Information Center

Serapiglia, Anthony; Serapiglia, Constance

2011-01-01

Handheld computer technology has been available for decades. The college student today has been exposed to various types of handheld computing devices for most of their lives yet there is little known about how a college student utilizes this type of technology tool as a learning advantage to an anytime or place scenario. This study looks at how…

Pattern of Task Interpretation and Self-Regulated Learning Strategies of High School Students and College Freshmen during an Engineering Design Project

ERIC Educational Resources Information Center

Lawanto, Oenardi; Butler, Deborah; Cartier, Sylvie C.; Santoso, Harry B.; Goodridge, Wade; Lawanto, Kevin N.; Clark, David

2013-01-01

The objective of this exploratory study was to describe patterns in self-regulated learning (SRL) for both high school students and college freshmen while engaged in a design activity. The main research question guiding this study was: How did high school and first-year college students self-regulate their approaches to learning when engaged in an…

Attributes and characteristics of the Mathematics, Engineering, Science, Achievement (MESA) high school program for first-generation Latino students

NASA Astrophysics Data System (ADS)

Flores, Ramon

This study used a web-based survey collected data from 28 first-generation Latino engineers who participated in the Mathematics, Engineering, Science, Achievement (MESA) program during their high school years. From the set of 28 respondents, 5 volunteered to participate in an optional telephone interview. The purpose of this study was to describe the critical attributes and characteristics of the MESA program that lead to success at both the high school and college levels for first-generation Latino students. Success at the high school level was operationally defined as successfully graduating with a high school diploma. Success at the college level was operationally defined here as college graduation with an engineering degree. Using a mixed-methods technique, the researcher attempted to secure consensus of opinion from a sample population of 28 first-generation Latino engineers. The mixed-methods technique was chosen since it allowed the researcher to draw on the strengths of quantitative and qualitative approaches. According to the findings, the typical respondent felt that mentoring was the attribute of the MESA program that most prepared him to graduate from high school. The respondents felt that the following MESA attributes most helped them transition into an undergraduate engineering program: Academic and University Advising; Enrichment Activities; Career Advising; Field Trips; Mentoring; Scholarship Incentive Awards; and Speakers. The respondents viewed study groups as the MESA attribute that best prepared them to graduate college with an engineering degree. This study was purposefully designed as a descriptive study. Future research is required to extend this work into an evaluative study. This would allow for the generalization of the critical attributes to the general student population serviced by the MESA program.

Physics Group Work in a Phenomenographic Perspective--Learning Dynamics as the Experience of Variation and Relevance

ERIC Educational Resources Information Center

Ingerman, Ake; Berge, Maria; Booth, Shirley

2009-01-01

In this paper, we analyse learning dynamics in the context of physics group work of the kind increasingly found in engineering education. We apply a phenomenographic perspective on learning, seeing the notion of variation as the basic mechanism of learning. Empirically, we base our analysis on data from first year engineering students discussing…

The Impact of a Peer-Tutoring Program on Quality Standards in Higher Education

ERIC Educational Resources Information Center

Arco-Tirado, Jose L.; Fernandez-Martin, Francisco D.; Fernandez-Balboa, Juan-Miguel

2011-01-01

The purposes of this study were, on one had, to determine the impact of a peer tutoring program on preventing academic failure and dropouts among first-year students (N = 100), from Civil Engineering, Economics, Pharmacy, and Chemical Engineering careers; while, on the other hand, to identify the potential benefits of such tutoring program on the…

Young Engineers and Scientists (YES) - A Science Education Partnership

NASA Astrophysics Data System (ADS)

Boice, D. C.; Asbell, H. E.; Reiff, P. H.

2007-12-01

Young Engineers and Scientists (YES) is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA). YES has been highly successful during the past 15 years and YES 2K7 continued this trend. The YES program provides talented high school juniors and seniors a bridge between classroom instruction and real world, research experiences in physical sciences (including space science and astronomy) and engineering. YES consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES 2K7 developed a website for the Magnetospheric Multiscale Mission (MMS) from the perspective of 20 high school students (yesserver.space.swri.edu). Over the past 15 years, all YES graduates have entered college, several have worked for SwRI, and three scientific publications have resulted. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. Acknowledgements: We acknowledge funding and support from the NASA MMS Mission, SwRI, Northside Independent School District, and local charitable foundations.

YES 2K5: Young Engineers and Scientists Mentorship Program

NASA Astrophysics Data System (ADS)

Boice, D. C.; Asbell, H. E.

2005-12-01

The Young Engineers and Scientists (YES) Program is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA). YES has been highly successful during the past 13 years, and YES 2K5 continued this trend. It provides talented high school juniors and seniors a bridge between classroom instruction and real-world, research experiences in physical sciences (including space science and astronomy) and engineering. YES 2K5 consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES 2K5 developed a website for the Magnetospheric Multiscale Mission (MMS) from the perspective of a high school student. Over the past 13 years, all YES graduates have entered college, several have worked for SwRI, and three scientific publications have resulted. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. We acknowledge funding from the NASA MMS Mission, the NASA E/PO program, and local charitable foundations.

Persistence of community college engineering science students: The impact of selected cognitive and noncognitive characteristics

NASA Astrophysics Data System (ADS)

Chatman, Lawrence M., Jr.

If the United States is to remain technologically competitive, persistence in engineering programs must improve. This study on student persistence employed a mixed-method design to identify the cognitive and noncognitive factors which contribute to students remaining in an engineering science curriculum or switching from an engineering curriculum at a community college in the northeast United States. Records from 372 students were evaluated to determine the characteristics of two groups: those students that persisted with the engineering curriculum and those that switched from engineering; also, the dropout phenomenon was evaluated. The quantitative portion of the study used a logistic regression analyses on 22 independent variables, while the qualitative portion of the study used group interviews to investigate the noncognitive factors that influenced persisting or switching. The qualitative portion of the study added depth and credibility to the results from the quantitative portion. The study revealed that (1) high grades in first year calculus, physics and chemistry courses, (2) fewer number of semesters enrolled, (3) attendance with full time status, and (4) not participating in an English as a Second Language (ESL) program were significant variables used to predict student persistence. The group interviews confirmed several of these contributing factors. Students that dropped out of college began with (1) the lowest levels of remediation, (2) the lowest grade point averages, and (3) the fewest credits earned.

Comparing Freshman and doctoral engineering students in design: mapping with a descriptive framework

NASA Astrophysics Data System (ADS)

Carmona Marques, P.

2017-11-01

This paper reports the results of a study of engineering students' approaches to an open-ended design problem. To carry out this, sketches and interviews were collected from 9 freshmen (first year) and 10 doctoral engineering students, when they designed solutions for orange squeezers. Sketches and interviews were analysed and mapped with a descriptive 'ideation framework' (IF) of the design process, to document and compare their design creativity (Carmona Marques, P., A. Silva, E. Henriques, and C. Magee. 2014. "A Descriptive Framework of the Design Process from a Dual Cognitive Engineering Perspective." International Journal of Design Creativity and Innovation 2 (3): 142-164). The results show that the designers worked in a manner largely consistent with the IF for generalisation and specialisation loops. Also, doctoral students produced more alternative solutions during the ideation process. In addition, compared to freshman, doctoral used the generalisation loop of the IF, working at higher levels of abstraction. The iterative nature of design is highlighted during this study - a potential contribution to decrease the gap between both groups in engineering education.

Integrating long-term science projects into K-12 curriculum: Fostering teacher-student engagement in urban environmental research through an NSF UCLA GK-12 program

NASA Astrophysics Data System (ADS)

Hogue, T. S.; Moldwin, M.; Nonacs, P.; Daniel, J.; Shope, R.

2009-12-01

A National Science Foundation Graduate Teaching Fellows in K- 12 Education program at UCLA (SEE-LA; http://measure.igpp.ucla.edu/GK12-SEE-LA) has just completed its first year (of a five-year program) and has greatly expanded UCLA’s science and engineering partnerships with LA Unified and Culver City Unified School Districts. The SEE-LA program partners UCLA faculty, graduate students (fellows), middle and high school science teachers and their students into a program of science and engineering exploration that brings the environment of Los Angeles into the classroom. UCLA graduate fellows serve as scientists-in-residence at the four partner schools to integrate inquiry-based science and engineering lessons, facilitate advancements in science content teaching, and ultimately, to improve their own science communication skills. As part of their fellowship, graduate students are required to develop three inquiry-based lessons in their partner classroom, including a lesson focused on their dissertation research, a lesson focused on the environmental/watershed theme of the project, and a lesson that involves longer-term data collection and synthesis with the grade 6-12 teachers and students. The developed long-term projects ideally involve continued observations and analysis through the five-year project and beyond. During the first year of the project, the ten SEE-LA fellows developed a range of long-term research projects, from seasonal invertebrate observations in an urban stream system, to home energy consumption surveys, to a school bioblitz (quantification of campus animals and insects). Examples of lesson development and integration in the classroom setting will be highlighted as well as tools required for sustainability of the projects. University and local pre-college school partnerships provide an excellent opportunity to support the development of graduate student communication skills while also contributing significantly to the integration of sustainable research projects into K-12 curriculum.

First-Generation Hispanic Freshmen Perceptions of Selecting a STEM Major

ERIC Educational Resources Information Center

Carrandi Molina, Elizabeth

2016-01-01

The purpose of this study was to explore the perceptions of Hispanic first-generation college students (FGCSs) who made the immediate transition from high school into a science, technology, engineering, or mathematics (STEM) field of study at a public, four-year higher education institution in South Florida. The conceptual foundation for this…

Understanding initial undergraduate expectations and identity in computing studies

NASA Astrophysics Data System (ADS)

Kinnunen, Päivi; Butler, Matthew; Morgan, Michael; Nylen, Aletta; Peters, Anne-Kathrin; Sinclair, Jane; Kalvala, Sara; Pesonen, Erkki

2018-03-01

There is growing appreciation of the importance of understanding the student perspective in Higher Education (HE) at both institutional and international levels. This is particularly important in Science, Technology, Engineering and Mathematics subjects such as Computer Science (CS) and Engineering in which industry needs are high but so are student dropout rates. An important factor to consider is the management of students' initial expectations of university study and career. This paper reports on a study of CS first-year students' expectations across three European countries using qualitative data from student surveys and essays. Expectation is examined from both short-term (topics to be studied) and long-term (career goals) perspectives. Tackling these issues will help paint a picture of computing education through students' eyes and explore their vision of its and their role in society. It will also help educators prepare students more effectively for university study and to improve the student experience.

Houston prefreshman enrichment program (Houston PREP). Final report, June 10, 1996--August 1, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-10-01

The 1996 Houston Pre-freshman Enrichment Program (PREP) was conducted on the campus of the University of Houston-Downtown from June 10 to August 1, 1996. Program Participants were recruited from the Greater Houston area. All participants were identified as high achieving students with an interest in learning about the engineering and science professions. The goal of the program was to better prepare our pre-college youth prior to entering college as mathematics, science and engineering majors. The program participants were middle school and high school students from the Aldine, Alief, Channel View, Crockett, Cypress-Fairbanks, Fort Bend, Galena Park, Houston, Humble, Katy, Klein,more » North Forest, Pasadena, Private, and Spring Branch Independent School Districts. Of the 197 students starting the program, 170 completed, 142 students were from economically and socially disadvantage groups underrepresented in the engineering and science professions, and 121 of the 197 were female. Our First Year group for 1996 composed of 96% minority and women students. Our Second and Third Year students were 100% and 93.75% minority or women respectively. This gave an overall minority and female population of 93.75%. This year, special efforts were again made to recruit students from minority groups, which caused a significant increase in qualified applicants. However, due to space limitations, 140 applicants were rejected. Investigative and discovery learning were key elements of PREP. The academic components of the program included Algebraic Structures, Engineering, Introduction to Computer Science, Introduction to Physics, Logic and Its Application to Mathematics, Probability and Statistics, Problem Solving Seminar using computers and PLATO software, SAT Preparatory Seminars, and Technical Writing.« less

A journey of negotiation and belonging: understanding students' transitions to science and engineering in higher education

NASA Astrophysics Data System (ADS)

Holmegaard, Henriette Tolstrup; Madsen, Lene Møller; Ulriksen, Lars

2014-09-01

The paper presents results from a longitudinal study of students' decisions to enrol on a higher education science programme and their experiences of it. The aim is to give insights into students' transition process and negotiation of identity. This is done by following a cohort of 38 students in a series of qualitative interviews during a 3-year period starting as they were about to finish upper secondary school. We find that the students' choice of study is an ongoing process of meaning-making, which continues when the students enter higher education and continuously work on their identities to gain a sense of belonging to their science or engineering programme. The use of a narrative methodology provides understanding of choice of study as involving changes in future perspectives and in the interpretation of past experiences. Further, we gain access into how this meaning-making process over time reflects the students' negotiations in terms of belonging to higher education and their coping strategies when their expectations of their new programme interact with their first-year experiences.

Youth Technology Academy

NASA Technical Reports Server (NTRS)

2005-01-01

One of the most important aspects of the YTA Program is that students, working with Tri-C instructors, NASA engineers, and technicians, begin to build relationships with professionals with whom they might not normally have contact. These professionals serve as role models for students and help them to apply math, science and problem-solving skills in real time to construct a competition-ready robot, allowing them to experience the satisfaction and challenges of an engineering or technical career by working diligently to solve problems that may never have been thought possible to solve. Transcending school boundaries, YTA is available to all students who are interested and qualified but who may otherwise never get an opportunity to participate because their school does not offer a robotics program. YTA fills an educational void by offering an exciting engineering and technology experience to a greater number of students than have been able to participate in the past. Our students have been working hard and see the long-term rewards for their efforts. The YTA Team 1270 was a finalist at the 2005 FIRST Robotics Florida Regional and took home second- place honors. Mark Poljak, nominated by the students of YTA Team 1270, received the Woodie Flowers Award at the FIRST 2005 Buckeye Regional competition. This award celebrates effective communication in the art and science of engineering and design. The YTA Team was also invited, as one of fifty-four teams, to participate in this year s FIRST VEX Robotics tournament representing Cuyahoga Community College and NASA GRC (Team 26), held at the FIRST Robotics National Competition in Atlanta, GA. Because of our efforts, community colleges from around the country have taken notice and have asked us to become part of the executive board of the RoboEducators, whose mission is to bring technology training to high school students in preparation for the future workforce.

Optical engineering capstone design projects with industry sponsors

NASA Astrophysics Data System (ADS)

Bunch, Robert M.; Leisher, Paul O.; Granieri, Sergio C.

2014-09-01

Capstone senior design is the culmination of a student's undergraduate engineering education that prepares them for engineering practice. In fact, any engineering degree program that pursues accreditation by the Engineering Accreditation Commission of ABET must contain "a major design experience based on the knowledge and skills acquired in earlier course work and incorporating appropriate engineering standards and multiple realistic constraints." At Rose-Hulman, we offer an interdisciplinary Optical Engineering / Engineering Physics senior design curriculum that meets this requirement. Part of this curriculum is a two-course sequence where students work in teams on a design project leading to a functional prototype. The students begin work on their capstone project during the first week of their senior year. The courses are deliverable-driven and the students are held accountable for regular technical progress through weekly updates with their faculty advisor and mid-term design reviews. We have found that client-sponsored projects offer students an enriched engineering design experience as it ensures consideration of constraints and standards requirements similar to those that they will encounter as working engineers. Further, client-sponsored projects provide teams with an opportunity for regular customer interactions which help shape the product design. The process that we follow in both soliciting and helping to scope appropriate industry-related design projects will be described. In addition, an outline of the capstone course structure as well as methods used to hold teams accountable for technical milestones will be discussed. Illustrative examples of past projects will be provided.

Engaging Students in Learning: Findings from a Study of Project-Led Education

ERIC Educational Resources Information Center

Fernandes, Sandra; Mesquita, Diana; Flores, Maria Assunção; Lima, Rui M.

2014-01-01

This paper reports on findings from a three-year study of project-based learning implemented in the first year of the Industrial Engineering and Management programme, at the University of Minho, Portugal. This particular model was inspired on project-led education (PLE), following Powell and Weenk's [2003. "Project-Led Engineering…

Student-inspired activities for the teaching and learning of engineering ethics.

PubMed

Alpay, E

2013-12-01

Ethics teaching in engineering can be problematic because of student perceptions of its subjective, ambiguous and philosophical content. The use of discipline-specific case studies has helped to address such perceptions, as has practical decision making and problem solving approaches based on some ethical frameworks. However, a need exists for a wider range of creative methods in ethics education to help complement the variety of activities and learning experiences within the engineering curriculum. In this work, a novel approach is presented in which first-year undergraduate students are responsible for proposing ethics education activities of relevance to their peers and discipline area. The students are prepared for the task through a short introduction on engineering ethics, whereby generic frameworks for moral and professional conduct are discussed, and discipline and student-relevance contexts provided. The approach has been used in four departments of engineering at Imperial College London, and has led to the generation of many creative ideas for wider student engagement in ethics awareness, reflection and understanding. The paper presents information on the premise of the introductory sessions for supporting the design task, and an evaluation of the student experience of the course and task work. Examples of proposals are given to demonstrate the value of such an approach to teachers, and ultimately to the learning experiences of the students themselves.

From Folklore to Molecular Pharmacophores: Cultivating STEM Students among Young, First-Generation Female Mexican-Americans

ERIC Educational Resources Information Center

Gardea, Jessica; Rios, Laura; Pal, Rituraj; Gardea-Torresdey, Jorge L.; Narayan, Mahesh

2011-01-01

The Research and Engineering Apprenticeship Program of the Academy of Applied Science has funded several high school student summer internships to work within the Department of Chemistry at the University of Texas at El Paso. Over the last nine years, young Mexican-American scholars have been recruited into STEM-specific (science, technology,…

Collaborative and Competitive Video Games for Teaching Computing in Higher Education

ERIC Educational Resources Information Center

Smith, Spencer; Chan, Samantha

2017-01-01

This study measures the success of using a collaborative and competitive video game, named Space Race, to teach computing to first year engineering students. Space Race is played by teams of four, each with their own tablet, collaborating to compete against the other teams in the class. The impact of the game on student learning was studied…

The Role of Out-of-School Experiences and Targeted Recruitment Efforts in Norwegian Science and Technology Students' Educational Choice

ERIC Educational Resources Information Center

Henriksen, Ellen Karoline; Jensen, Fredrik; Sjaastad, Jørgen

2015-01-01

Understanding young people's educational choice is of interest in order to recruit sufficient numbers of young people to careers in science, technology, engineering and mathematics (STEM). In this article, questionnaire data (closed and open-ended questions) from 5,007 Norwegian first-year students in all STEM higher-education disciplines are…

The Library's New Relevance: Fostering the First-Year Student's Acquisition, Evaluation, and Integration of Print and Electronic Materials

ERIC Educational Resources Information Center

Hlavaty, Greg; Townsend, Murphy

2010-01-01

Modern composition instructors often use and teach research methods for Internet search engines and electronic databases. It is not their intent to turn back the clock. However, if they can help students connect the world of Internet searches and the university library, they can promote information literacy in its broadest sense by developing…

Course-Taking Patterns of Community College Students Beginning in STEM: Using Data Mining Techniques to Reveal Viable STEM Transfer Pathways

ERIC Educational Resources Information Center

Wang, Xueli

2016-01-01

This research focuses on course-taking patterns of beginning community college students enrolled in one or more non-remedial science, technology, engineering, and mathematics (STEM) courses during their first year of college, and how these patterns are mapped against upward transfer in STEM fields of study. Drawing upon postsecondary transcript…

Adaptation of abbreviated mathematics anxiety rating scale for engineering students

NASA Astrophysics Data System (ADS)

Nordin, Sayed Kushairi Sayed; Samat, Khairul Fadzli; Sultan, Al Amin Mohamed; Halim, Bushra Abdul; Ismail, Siti Fatimah; Mafazi, Nurul Wirdah

2015-05-01

Mathematics is an essential and fundamental tool used by engineers to analyse and solve problems in their field. Due to this, most engineering education programs involve a concentration of study in mathematics courses whereby engineering students have to take mathematics courses such as numerical methods, differential equations and calculus in the first two years and continue to do so until the completion of the sequence. However, the students struggled and had difficulties in learning courses that require mathematical abilities. Hence, this study presents the factors that caused mathematics anxiety among engineering students using Abbreviated Mathematics Anxiety Rating Scale (AMARS) through 95 students of Universiti Teknikal Malaysia Melaka (UTeM). From 25 items in AMARS, principal component analysis (PCA) suggested that there are four mathematics anxiety factors, namely experiences of learning mathematics, cognitive skills, mathematics evaluation anxiety and students' perception on mathematics. Minitab 16 software was used to analyse the nonparametric statistics. Kruskal-Wallis Test indicated that there is a significant difference in the experience of learning mathematics and mathematics evaluation anxiety among races. The Chi-Square Test of Independence revealed that the experience of learning mathematics, cognitive skills and mathematics evaluation anxiety depend on the results of their SPM additional mathematics. Based on this study, it is recommended to address the anxiety problems among engineering students at the early stage of studying in the university. Thus, lecturers should play their part by ensuring a positive classroom environment which encourages students to study mathematics without fear.

Perception and Intention in Relation to Engineering: A Gendered Study Based on a One-Day Outreach Activity

ERIC Educational Resources Information Center

Molina-Gaudo, Pilar; Baldassarri, S.; Villarroya-Gaudo, M.; Cerezo, E.

2010-01-01

This paper explores both how male and female high school pupils (15-16 years old) perceive the engineering profession and their willingness to pursue a career in this area. A study was performed around a one-day outreach activity, Girls' Day, organized for the first time in Spain. During Girls' Day, students were exposed to specific activities…

Educating Tomorrow's Aerrospace Engineers by Developing and Launching Liquid-Propelled Rockets

NASA Astrophysics Data System (ADS)

Besnard, Eric; Garvey, John; Holleman, Tom; Mueller, Tom

2002-01-01

conducted at California State University, Long Beach (CSULB), in which engineering students develop and launch liquid propelled rockets. The program is articulated around two main activities, each with specific objectives. The first component of CALVEIN is a systems integration laboratory where students develop/improve vehicle subsystems and integrate them into a vehicle (Prospector-2 - P-2 - for the 2001-02 academic year - AY). This component has three main objectives: (1) Develop hands- on skills for incoming students and expose them to aerospace hardware; (2) allow for upper division students who have been involved in the program to mentor incoming students and manage small teams; and (3) provide students from various disciplines within the College of Engineering - and other universities - with the chance to develop/improve subsystems on the vehicle. Among recent student projects conducted as part of this component are: a new 1000 lbf thrust engine using pintle injector technology, which was successfully tested on Dec. 1, 2001 and flown on Prospector-2 in Feb. 2002 (developed by CSULB Mechanical and Aerospace Engineering students); a digital flight telemetry package (developed by CSULB Electrical Engineering students); a new recovery system where a mechanical system replaces pyrotechnics for parachute release (developed by CSULB Mechanical and Aerospace Engineering students); and a 1-ft payload bay to accommodate experimental payloads (e.g. "CANSATS" developed by Stanford University students). The second component of CALVEIN is a formal Aerospace System Design curriculum. In the first-semester, from top-level system requirements, the students perform functional analysis, define the various subsystems and derive their requirements. These are presented at the Systems Functional and Requirement Reviews (SFR &SRR). The methods used for validation and verification are determined. Specifications and Interface Control Documents (ICD) are generated by the student team(s). Trade studies are identified and conducted, leading to a Preliminary Design Review (PDR) at the end of the first semester. A detailed design follows, culminating in a Critical Design Review (CDR), etc. A general process suitable for a two-semester course sequence will be outlined. The project is conducted in an Integrated Product Team (IPT) environment, which includes a project manager, a systems engineer, and the various disciplines needed for the project (propulsion, aerodynamics, structures and materials, mass, CAD, thermal, fluids, etc.). Each student works with a Faculty member or industry advisor who is a specialist in his/her area. This design curriculum enhances the education of the graduates and provides future employers with engineers cognizant of and experienced in the application of Systems Engineering to a full-scale project over the entire product development cycle. For the AY01-02, the curriculum is being applied to the development of a gimbaled aerospike engine and its integration into P-3, scheduled to fly in May 2002. The paper ends with a summary of "lessons learned" from this experience. Budget issues are also addressed to demonstrate the ability to replicate such projects at other institutions with minimal costs, provided that it can be taken advantages of possible synergies between existing programs, in-house resources, and cooperation with other institutions or organizations.

Design and Application of Interactive Simulations in Problem-Solving in University-Level Physics Education

NASA Astrophysics Data System (ADS)

Ceberio, Mikel; Almudí, José Manuel; Franco, Ángel

2016-08-01

In recent years, interactive computer simulations have been progressively integrated in the teaching of the sciences and have contributed significant improvements in the teaching-learning process. Practicing problem-solving is a key factor in science and engineering education. The aim of this study was to design simulation-based problem-solving teaching materials and assess their effectiveness in improving students' ability to solve problems in university-level physics. Firstly, we analyze the effect of using simulation-based materials in the development of students' skills in employing procedures that are typically used in the scientific method of problem-solving. We found that a significant percentage of the experimental students used expert-type scientific procedures such as qualitative analysis of the problem, making hypotheses, and analysis of results. At the end of the course, only a minority of the students persisted with habits based solely on mathematical equations. Secondly, we compare the effectiveness in terms of problem-solving of the experimental group students with the students who are taught conventionally. We found that the implementation of the problem-solving strategy improved experimental students' results regarding obtaining a correct solution from the academic point of view, in standard textbook problems. Thirdly, we explore students' satisfaction with simulation-based problem-solving teaching materials and we found that the majority appear to be satisfied with the methodology proposed and took on a favorable attitude to learning problem-solving. The research was carried out among first-year Engineering Degree students.

Impacts of Innovativeness and Attitude on Entrepreneurial Intention: Among Engineering and Non-Engineering Students

ERIC Educational Resources Information Center

Law, Kris M. Y.; Breznik, Kristijan

2017-01-01

This study attempted to explore the impacts of attitudinal antecedents on students' entrepreneurial intention. Comparisons between students of engineering and non-engineering backgrounds and gender groups were made. Total of 998 students from universities in Hong Kong were surveyed, leading to a number of highlights in the study. First, it is…

A case study of pedagogy of mathematics support tutors without a background in mathematics education

NASA Astrophysics Data System (ADS)

Walsh, Richard

2017-01-01

This study investigates the pedagogical skills and knowledge of three tertiary-level mathematics support tutors in a large group classroom setting. This is achieved through the use of video analysis and a theoretical framework comprising Rowland's Knowledge Quartet and general pedagogical knowledge. The study reports on the findings in relation to these tutors' provision of mathematics support to first and second year undergraduate engineering students and second year undergraduate science students. It was found that tutors are lacking in various pedagogical skills which are needed for high-quality learning amongst service mathematics students (e.g. engineering/science/technology students), a demographic which have low levels of mathematics upon entering university. Tutors teach their support classes in a very fast didactic way with minimal opportunities for students to ask questions or to attempt problems. It was also found that this teaching method is even more so exaggerated in mandatory departmental mathematics tutorials that students take as part of their mathematics studies at tertiary level. The implications of the findings on mathematics tutor training at tertiary level are also discussed.

Shedding light on the subject: introduction to illumination engineering and design for multidiscipline engineering students

NASA Astrophysics Data System (ADS)

Ronen, Ram S.; Smith, R. Frank

1995-10-01

Educating engineers and architects in Illumination Engineering and related subjects has become a very important field and a very satisfying and rewarding one. Main reasons include the need to significantly conserve lighting energy and meet government regulations while supplying appropriate light levels and achieving aesthetical requirements. The proliferation of new lamps, luminaries and lighting controllers many of which are 'energy savers' also helps a trend to seek help from lighting engineers when designing new commercial and residential buildings. That trend is believed to continue and grow as benefits become attractive and new government conservation regulations take affect. To make things even better one notices that Engineering and Science students in most disciplines make excellent candidates for Illumination Engineers because of their background and teaching them can move ahead at a brisk pace and be a rewarding experience nevertheless. In the past two years, Cal Poly Pomona College of Engineering has been the beneficiary of a DOE/California grant. Its purpose was to precipitate and oversee light curricula in various California community colleges and also develop and launch an Illumination Engineering minor at Cal Poly University. Both objectives have successfully been met. Numerous community colleges throughout California developed and are offering a sequence of six lighting courses leading to a certificate; the first graduating class is now coming out of both Cypress and Consumnes Community Colleges. At Cal Poly University a four course/laboratory sequence leading to a minor in Illumination Engineering (ILE) is now offered to upper division students in the College of Engineering, College of Science and College of Architecture and Design. The ILE sequence will briefly be described. The first course, Introduction to Illumination Engineering and its laboratory are described in more detail alter. Various methods of instruction including lectures, self work, industrial visits and guest lectures, as well as the accompanying laboratory work are discussed. Feedback from the students was very positive.

Things for You to Know. Fuel System. Student Manual--Introduction. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual, part of a small-engine repair series on servicing fuel systems, is designed for use by special needs students in Texas. Information covered in this manual is considered to be the minimum that students need to know about fuel systems in order to get small-engine repair jobs. The manual introduces students to small-engine fuel…

Incorporating geoethics into environmental engineering lectures - three years of experience from international students visiting Iceland

NASA Astrophysics Data System (ADS)

Finger, David C.

2017-04-01

Never before has human kind been facing bigger environmental challenges than today. The challenges are overwhelming: growing human population, increasing ecological footprints, accelerated climate change, severe soil degradation, eutrophication of vital fresh water resources, acidification of oceans, health threatening air pollution and rapid biodiversity loss, to name just a few. It is the task of environmental scientists to transmit established knowledge on these complex and interdisciplinary challenges while demonstrating that management and engineering solutions exist to meet these threats. In this presentation I will outline the concept of my environmental impact (EI) assessment course, where prospective engineering students can select a topic of their choice, assess the environmental impacts, discuss with relevant stakeholders and come up with innovative solutions. The course is structured in three parts: i) lecturing of theoretical methods frequently used within the EI assessment process, ii) interaction with local businesses to acquire first-hand experience and iii) hands on training by writing an EI statement on a selected topic (see link below). Over the course of three years over 70 prospective engineering students from all over the world have not only acquired environmental system understanding, but also enhanced their awareness and developed potential solutions to mitigate, compensate and reverse the persistent environmental challenges. Most importantly, during this process all involved stakeholders (students, teachers, industry partners, governmental bodies and NGO partners) will hopefully develop a mutual understanding of the above mentioned environmental challenges and engage in an open and constructive dialogue necessary to generate acceptable solutions. Link to student projects from previous years: https://fingerd.jimdo.com/teaching/courses/environmental-impact-assessment/

YES 2K7: A Mentorship Program for Young Engineers and Scientists

NASA Astrophysics Data System (ADS)

Boice, Daniel C.; Asbell, E.; Reiff, P.

2007-10-01

The Young Engineers and Scientists 2007 (YES 2K7) Program is a community partnership between Southwest Research Institute (SwRI), and local high schools in San Antonio, Texas (USA). YES has been highly successful during the past 15 years, with YES 2K7 continuing this trend. The YES program provides talented high school juniors and seniors a bridge between classroom instruction and real world, research experiences in physical sciences (including space science and astronomy) and engineering. YES 2K7 consists of two parts: 1) an intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, computers and the Internet, careers, science ethics, and other topics; and select individual research projects to be completed during the academic year; and 2) a collegial mentorship where students complete individual research projects under the guidance of their mentors during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES 2K7 developed a website for the Magnetospheric Multiscale Mission (MMS) from the perspective of 20 high school students (yesserver.space.swri.edu). Over the past 15 years, all YES graduates have entered college, several have worked for SwRI, and three scientific publications have resulted. Student evaluations indicate the effectiveness of YES on their academic preparation and choice of college majors. Acknowledgements: We acknowledge funding and support from the NASA MMS Mission, SwRI, Northside Independent School District, and local charitable foundations.

Creating and maintaining a successful geoscience pathway from 2YC to 4YC for Native Hawaiian Students: First Steps

NASA Astrophysics Data System (ADS)

Guidry, M.; Eschenberg, A.; McCoy, F. W.; McManus, M. A.; Lee, K.; DeLay, J. K.; Taylor, S. V.; Dire, J.; Krupp, D.

2017-12-01

In the Fall of 2015, the two four year (4YC) institutions within the University of Hawaii (UH) system offering baccalaureate degrees in geosciences enrolled only six Native Hawaiian (NH) students out of a total of 194 students in geoscience degree programs. This percentage (3%) of NH students enrolled in geosciences is far lower than the percentage of NH students enrolled at any single institution in the UH system, which ranges from 14 to 42%. At the same time, only six (3%) of the 194 students enrolled in geoscience baccalaureate programs were transfer students from the UH community colleges. Of these six transfer students, three were NH. This reflects the need for increased transfer of NH in the geosciences from two year (2YC) to 4YC. In the Fall of 2015, UH Manoa's (UHM) School of Ocean and Earth Science and Technology (SOEST) accounted for only 0.14% of transfer students from UH community colleges. This compares to 5% in the UHM School of Engineering and 27% in the UHM College of Arts and Sciences. As part of the first year of a multi-institutional five-year NSF TCUP-PAGE (Tribal Colleges and Universities Program - PArtnerships for Geoscience Education) award, we review our first steps and strategies for building a successful and sustainable geoscience transfer pathway for Native Hawaiian and community college students into the three undergraduate geoscience programs (Atmospheric Sciences, Environmental Sciences, and Geology & Geophysics) within SOEST.

Project Lead the Ways' Long-Term Effects on Post-Secondary Engineering Academic Success

NASA Astrophysics Data System (ADS)

Zion, George H.

The purpose of this study was to investigate the relationship between students' high school Project Lead They Way participation and their subsequent academic success in post-secondary engineering studies and to assess to what degree, if any, their level of Project Lead The Way (PLTW) participation, gender, and AALANA status (African American, Latino/a American and Native American) effected this success. PLTW is the nation's single largest provider of pre-engineering curriculums, the subject of this research study, currently being offered in over 3,200 secondary schools nationwide. Despite this level of integration, the amount of research on PLTW's effectiveness has been very limited. To date, the majority of the literature on PLTW has examined its impact on students' high school academic performance or their desire to further their engineering studies. The findings from these studies have been overwhelmingly positive, indicating that PLTW students often had greater achievements in math and science and either plan to, or have actually enrolled, in post-secondary studies at higher rates. Nevertheless, the amount of literature on PLTW's effects on students' academic success in post-secondary engineering studies is very limited. Furthermore, no research has yet to examine for the moderating effects of gender, ethnicity, or level of PLTW participation on students' post-secondary academics success. The population of interest for this research study was 1,478 students who entered an undergraduate engineering program from 2007 to 2009 at a privately endowed, co-educational university located in the northeastern United States. The findings of this research study were that virtually all the effects of PLTW participation, gender, and AALANA status had on academic success were observed during students' freshmen and sophomore years. These effects were positive for PLTW participation, and adverse for female and AALANA students. Additionally, PLTW participation, gender, and AALANA status only explained a small amount of the variance for each of the academic success metrics. These conclusions suggest that future research on PLTW should focus on the first and second year of study and expand the factors examined, both quantitative and qualitative, to gain a greater understanding of the complex factors that influence students' initial academic success in post-secondary engineering studies.

Profiling first-year students in STEM programs based on autonomous motivation and academic self-concept and relationship with academic achievement.

PubMed

Van Soom, Carolien; Donche, Vincent

2014-01-01

The low success rate of first-year college students in Science, Technology, Engineering, and Mathematics (STEM) programs has spurred many academic achievement studies in which explanatory factors are studied. In this study, we investigated from a person-oriented perspective whether different motivational and academic self-concept profiles could be discerned between male and female first-year college students in STEM and whether differences in early academic achievement were associated with these student groups. Data on autonomous motivation, academic self-concept, and early academic achievement of 1,400 first-year STEM college students were collected. Cluster analyses were used to distinguish motivational profiles based on the relative levels of autonomous motivation and academic self-concept for male and female students. Differences in early academic achievement of the various profiles were studied by means of ANCOVA. Four different motivational profiles were discerned based on the dimensions of autonomous motivation (A) and academic self-concept (S): students scoring high and respectively low on both dimensions (HA-HS or LA-LS), and students scoring high on one dimension and low on the other (HA-LS or LA-HS). Also gender differences were found in this study: male students with high levels of academic self-concept and autonomous motivation had higher academic achievement compared to male students with low levels on both motivational dimensions. For female students, motivational profiles were not associated with academic achievement. The findings partially confirm the internal and external validity of the motivational theories underpinning this study and extend the present insights on identifying subgroup(s) of at risk students in contemporary STEM programs at university level.

Profiling First-Year Students in STEM Programs Based on Autonomous Motivation and Academic Self-Concept and Relationship with Academic Achievement

PubMed Central

Van Soom, Carolien; Donche, Vincent

2014-01-01

The low success rate of first-year college students in Science, Technology, Engineering, and Mathematics (STEM) programs has spurred many academic achievement studies in which explanatory factors are studied. In this study, we investigated from a person-oriented perspective whether different motivational and academic self-concept profiles could be discerned between male and female first-year college students in STEM and whether differences in early academic achievement were associated with these student groups. Data on autonomous motivation, academic self-concept, and early academic achievement of 1,400 first-year STEM college students were collected. Cluster analyses were used to distinguish motivational profiles based on the relative levels of autonomous motivation and academic self-concept for male and female students. Differences in early academic achievement of the various profiles were studied by means of ANCOVA. Four different motivational profiles were discerned based on the dimensions of autonomous motivation (A) and academic self-concept (S): students scoring high and respectively low on both dimensions (HA-HS or LA-LS), and students scoring high on one dimension and low on the other (HA-LS or LA-HS). Also gender differences were found in this study: male students with high levels of academic self-concept and autonomous motivation had higher academic achievement compared to male students with low levels on both motivational dimensions. For female students, motivational profiles were not associated with academic achievement. The findings partially confirm the internal and external validity of the motivational theories underpinning this study and extend the present insights on identifying subgroup(s) of at risk students in contemporary STEM programs at university level. PMID:25390942

What Do Final Year Engineering Students Know about Sustainable Development?

ERIC Educational Resources Information Center

Nicolaou, I.; Conlon, E.

2012-01-01

This paper presents data from a project that aims to determine the level of knowledge and understanding of engineering students about sustainable development (SD). The data derive from a survey completed by final year engineering students in three Irish Higher Education Institutions. This paper is part of a larger study that examines the…

Students' Understanding of the Special Theory of Relativity and Design for a Guided Visit to a Science Museum

ERIC Educational Resources Information Center

Guisasola, Jenaro; Solbes, Jordi; Barragues, Jose-Ignacio; Morentin, Maite; Moreno, Antonio

2009-01-01

The present paper describes the design of teaching materials that are used as learning tools in school visits to a science museum. An exhibition on "A century of the Special Theory of Relativity", in the Kutxaespacio Science Museum, in San Sebastian, Spain, was used to design a visit for first-year engineering students at the university…

Instructional Design to Develop Communication Ability for Students in the Electrical Engineering Majors

NASA Astrophysics Data System (ADS)

Nakano, Mika; Takahara, Kenji; Kajiwara, Toshinori

This paper describes the instructional design to develop communication ability for students in the electrical engineering majors. It is based on the case of Fukuoka Institute of Technology which started new courses for communication skills in 2007. A series of communication education from the freshman year to the third grade is systematized, considering the developmental process of students' argumentation. In the classes, students continually learn dialogue and cooperation through various styles of discussion, debate, presentation and so on. The first introductory class of all is “Communication Theory I”, which is aimed at developing self-awareness and improving discussion skills for interpersonal relationship. In this course, students acquire skills to construct their arguments about the given issues and to evaluate others' presentation performances each other. To cultivate students' communication ability, education should not be closed in a class, but support system from departmental level is essential.

Science Outside the Lab: Helping Graduate Students in Science and Engineering Understand the Complexities of Science Policy.

PubMed

Bernstein, Michael J; Reifschneider, Kiera; Bennett, Ira; Wetmore, Jameson M

2017-06-01

Helping scientists and engineers challenge received assumptions about how science, engineering, and society relate is a critical cornerstone for macroethics education. Scientific and engineering research are frequently framed as first steps of a value-free linear model that inexorably leads to societal benefit. Social studies of science and assessments of scientific and engineering research speak to the need for a more critical approach to the noble intentions underlying these assumptions. "Science Outside the Lab" is a program designed to help early-career scientists and engineers understand the complexities of science and engineering policy. Assessment of the program entailed a pre-, post-, and 1 year follow up survey to gauge student perspectives on relationships between science and society, as well as a pre-post concept map exercise to elicit student conceptualizations of science policy. Students leave Science Outside the Lab with greater humility about the role of scientific expertise in science and engineering policy; greater skepticism toward linear notions of scientific advances benefiting society; a deeper, more nuanced understanding of the actors involved in shaping science policy; and a continued appreciation of the contributions of science and engineering to society. The study presents an efficacious program that helps scientists and engineers make inroads into macroethical debates, reframe the ways in which they think about values of science and engineering in society, and more thoughtfully engage with critical mediators of science and society relationships: policy makers and policy processes.

A Paradox in Physics Education in France

ERIC Educational Resources Information Center

Smigiel, Eddie; Sonntag, Michel

2013-01-01

This paper deals with the nature and the level of difficulty of teaching and learning physics in the first year of undergraduate engineering schools in France. Our case study is based on a survey regarding a classic and basic question in applied physics, and which was conducted with a group of second-year students in a post-baccalaureate 1…

Redeveloping Nicosia International Airport: an extroverting Y2 group design project

NASA Astrophysics Data System (ADS)

Yiatros, S.

2017-11-01

This article follows the timeline of the 'Nicosia International Airport: The Return' Integrated Design Project which was undertaken by Year 2 students of Civil Engineering and Geomatics at the Cyprus University of Technology in Cyprus. The Nicosia International Airport was the first and main airport of the Republic of Cyprus since its independence from the British Empire in 1960. The airport remains closed since the Turkish invasion of 1974 and is located in the buffer zone administered by the United Nations Peace-keeping Force in Cyprus. In this work, the innovative aspects of a project to inspire and train engineering students are highlighted, while special attention is given to the dissemination and outreach of the project through the social media. The attracted attention of national media and the project's impact on the local society had a cyclical effect, further inspiring students to work hard and act as responsible professional engineers. 'Nicosia International Airport: The Return' is a case study of how an academic engineering project can have societal impact, by inspiring students, engaging practitioners from a wide spectrum of disciplines, captivating the general public and raising the profile of Civil Engineering in the society.

Exploring the Engineering Student Experience: Findings from the Academic Pathways of People Learning Engineering Survey (APPLES). TR-10-01

ERIC Educational Resources Information Center

Sheppard, Sheri; Gilmartin, Shannon; Chen, Helen L.; Donaldson, Krista; Lichtenstein, Gary; Eris, Ozgur; Lande, Micah; Toye, George

2010-01-01

This report is based on data from the Academic Pathways of People Learning Engineering Survey (APPLES), administered to engineering students at 21 U.S. engineering colleges and schools in the spring of 2008. The first comprehensive set of analyses completed on the APPLES dataset presented here looks at how engineering students experience their…

First Generation College Students in STEM: Counter Stories of Success

NASA Astrophysics Data System (ADS)

Hernandez, Carol D.

First-generation community college Science, Technology, Engineering, and Mathematics (STEM) students have unique challenges in transferring to a four-year college. This is especially true for Latin and African American students who may experience multiple challenges, including discrimination, immigration issues and language issues, and sometimes poor academic preparation in their K-12 education. This project used a grounded theory approach to explore through an equity lens the educational journey of seven Los Medanos College students who have successfully transferred to a four-year institution were interviewed. All of these students that participated in this project were former Mathematics Engineering Science Achievement Program (MESA) students at Los Medanos College. The MESA Program is a learning community that provides academic support for "educationally and economically disadvantaged" students so they can excel in math and science, transfer to four-year institutions as majors in math-based fields, and graduate with baccalaureate degrees in STEM majors. Several intervention strategies are embedded into the program, including: counseling, mentors, a learning center, tutors, financial aid and transfer workshops, and internship and scholarship opportunities. The students were interviewed and asked several questions regarding their high school life, MESA, and community college and transfer experiences. The main theoretical framework utilized to analyze the interviews was Border Lands theory because these students created a safe space that allowed them to straddle their life at home and their life at school. Interviews with these students reveal seven successful, happy, and engaged students. Several themes emerged with respect to the importance of students' finding a major that they love, finding community, and the importance of teachers, family, and engagement in their success. The results of this project also emphasize the importance of hiring passionate teachers, challenging students, and engaging them via their interests and passions. The interviews uncovered Critical Race Theory counter stories, showing that despite the many barriers that these students encountered throughout their educational journey, they were able to succeed at the highest levels.

Building international experiences into an engineering curriculum - a design project-based approach

NASA Astrophysics Data System (ADS)

Maldonado, Victor; Castillo, Luciano; Carbajal, Gerardo; Hajela, Prabhat

2014-07-01

This paper is a descriptive account of how short-term international and multicultural experiences can be integrated into early design experiences in an aerospace engineering curriculum. Such approaches are considered as important not only in fostering a student's interest in the engineering curriculum, but also exposing them to a multicultural setting that they are likely to encounter in their professional careers. In the broader sense, this programme is described as a model that can be duplicated in other engineering disciplines as a first-year experience. In this study, undergraduate students from Rensselaer Polytechnic Institute (RPI) and Universidad del Turabo (UT) in Puerto Rico collaborated on a substantial design project consisting of designing, fabricating, and flight-testing radio-controlled model aircraft as a capstone experience in a semester-long course on Fundamentals of Flight. The two-week long experience in Puerto Rico was organised into academic and cultural components designed with the following objectives: (i) to integrate students in a multicultural team-based academic and social environment, (ii) to practise team-building skills and develop students' critical thinking and analytical skills, and finally (iii) to excite students about their engineering major through practical applications of aeronautics and help them decide if it is a right fit for them.

The Relationship of Learning Communities to Engineering Students' Perceptions of the Freshman Year Experience, Academic Performance, and Persistence

ERIC Educational Resources Information Center

Tolley, Patricia Ann Separ

2009-01-01

The purpose of this correlational study was to examine the effects of a residential learning community and enrollment in an introductory engineering course to engineering students' perceptions of the freshman year experience, academic performance, and persistence. The sample included students enrolled in a large, urban, public, research university…

The Characteristics and Experiences of Successful Undergraduate Latina Students Who Persist in Engineering

NASA Astrophysics Data System (ADS)

Robinson, Carrie

Females and underrepresented ethnic minorities earn a small percentage of engineering and computer science bachelor's degrees awarded in the United States, earn an even smaller proportion of master's and doctoral degrees, and are underrepresented in the engineering workforce (Engineering Workforce Commission, [2006], as cited in National Science Foundation, 2012; United States Department of Education, [2006], as cited in National Science Foundation, 2009a; United States Department of Education, [2006], as cited in National Science Foundation, 2009b). Considerable research has examined the perceptions, culture, curriculum, and pedagogy in engineering that inhibits the achievement of women and underrepresented ethnic minorities. This action research study used a qualitative approach to examine the characteristics and experiences of Latina students who pursued a bachelor's degree in the Ira A. Fulton Schools of Engineering at Arizona State University (ASU) as part of the 2008 first-time full-time freshman cohort. The researcher conducted two semi-structured individual interviews with seven undergraduate Latina students who successfully persisted to their fourth (senior) year in engineering. The researcher aimed to understand what characteristics made these students successful and how their experiences affected their persistence in an engineering major. The data collected showed that the Latina participants were motivated to persist in their engineering degree program due to their parents' expectations for success and high academic achievement; their desire to overcome the discrimination, stereotyping, and naysayers that they encountered; and their aspiration to become a role model for their family and other students interested in pursuing engineering. From the data collected, the researcher provided suggestions to implement and adapt educational activities and support systems within the Ira A. Fulton Schools of Engineering to improve the retention and graduation rates of Latinas in engineering at ASU.

NASA/USRA University Advanced Design Program Fifth Annual Summer Conference

NASA Technical Reports Server (NTRS)

1989-01-01

The NASA/USRA University Advanced Design Program is a unique program that brings together NASA engineers, students, and faculty from United States engineering schools by integrating current and future NASA space/aeronautics engineering design projects into the university curriculum. The Program was conceived in the fall of 1984 as a pilot project to foster engineering design education in the universities and to supplement NASA's in-house efforts in advanced planning for space and aeronautics design. Nine universities and five NASA centers participated in the first year of the pilot project. Close cooperation between the NASA centers and the universities, the careful selection of design topics, and the enthusiasm of the students has resulted in a very successful program than now includes forty universities and eight NASA centers. The study topics cover a broad range of potential space and aeronautics projects.

Demanded competences in the agricultural engineering sector in Spain

NASA Astrophysics Data System (ADS)

Perdigones, A.; García, J. L.; Benavente, R. M.; Tarquis, A. M.

2009-04-01

An engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that combine creativity and imagination with rigour and discipline. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities. Training in the use of certain skills or competences may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which skills are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. Three surveys were undertaken to determine which skills are demanded by agricultural engineers in their professional activities in Spain. Surveys were carried out by the Department of Rural Engineering, Technical University of Madrid (Spain), analysing two related degrees (agricultural engineer with a duration of the study plan of three and five years, respectively) during the courses 2006/07 and 2007/08. The first survey determined the competences acquired by the students along their academic studies (371 students interviewed). The second survey determined the skills demanded by the enterprises of the agricultural sector (50 enterprises interviewed). The third survey determined the skills demanded by the agricultural engineers working in the sector (70 engineers interviewed), specifically asking about the computer programs used by practising agricultural engineers. Surveys showed important differences between the competences demanded by the enterprises and the competences acquired by the students at the university. Enterprises mainly demanded general competences (team working, time organizing, and skills with computer programs) and were less interested in specific technical skills (engineering, economy, biological competences). These differences suggest it might be a good idea to increase the amount of time devoted to the skills demanded by the enterprises. The software packages most commonly used by practising engineers were Microsoft Office / Excel (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of the demanded competences. The results of this survey underline the importance of competence training in this and perhaps other fields of engineering.

First Generation College Students in Engineering: A Grounded Theory Study of Family Influence on Academic Decision Making

ERIC Educational Resources Information Center

Simmons, Denise Rutledge

2012-01-01

This work develops a constructivist grounded theory describing the influence of family and those that serve a role similar to family on the academic decision making of undergraduate first generation in college (FGC) students majoring in engineering. FGC students, in this study, are students with neither parent having attained a bachelor's…

Instructional Changes Adopted for an Engineering Course: Cluster Analysis on Academic Failure

PubMed Central

Álvarez-Bermejo, José A.; Belmonte-Ureña, Luis J.; Martos-Martínez, África; Barragán-Martín, Ana B.; Simón-Márquez, María M.

2016-01-01

As first year students come from diverse backgrounds, basic skills should be accessible to everyone as soon as possible. Transferring such skills to these students is challenging, especially in highly technical courses. Ensuring that essential knowledge is acquired quickly promotes the student’s self-esteem and may positively influence failure rates. Metaphors can help do this. Metaphors are used to understand the unknown. This paper shows how we made a turn in student learning at the University of Almeria. Our hypothesis assumed that metaphors accelerate the acquisition of basic knowledge so that other skills built on that foundation are easily learned. With these goals in mind, we changed the way we teach by using metaphors and abstract concepts in a computer organization course, a technical course in the first year of an information technology engineering degree. Cluster analysis of the data on collective student performance after this methodological change clearly identified two distinct groups. These two groups perfectly matched the “before and after” scenarios of the use of metaphors. The study was conducted during 11 academic years (2002/2003 to 2012/2013). The 475 observations made during this period illustrate the usefulness of this change in teaching and learning, shifting from a propositional teaching/learning model to a more dynamic model based on metaphors and abstractions. Data covering the whole period showed favorable evolution of student achievement and reduced failure rates, not only in this course, but also in many of the following more advanced courses. The paper is structured in five sections. The first gives an introduction, the second describes the methodology. The third section describes the sample and the study carried out. The fourth section presents the results and, finally, the fifth section discusses the main conclusions. PMID:27895611

Results of Summer Enrichment Program to Promote High School Students' Interest in Engineering

ERIC Educational Resources Information Center

Hart, Brenda; McAnulty, Kate

2014-01-01

For more than thirty years, personnel from the University of Louisville J.B. Speed School of Engineering have presented a summer program targeting high school students historically underrepresented in engineering fields. INSPIRE provides these students with an introduction to careers in engineering and assists the students in planning their…

Reaching Students: What Research Says about Effective Instruction in Undergraduate Science and Engineering

ERIC Educational Resources Information Center

Kober, Nancy

2015-01-01

The undergraduate years are a turning point in producing scientifically literate citizens and future scientists and engineers. Evidence from research about how students learn science and engineering shows that teaching strategies that motivate and engage students will improve their learning. So how do students best learn science and engineering?…

Evolution of Students' Varied Conceptualizations About Socially Responsible Engineering: A Four Year Longitudinal Study.

PubMed

Rulifson, Greg; Bielefeldt, Angela R

2018-03-20

Engineers should learn how to act on their responsibility to society during their education. At present, however, it is unknown what students think about the meaning of socially responsible engineering. This paper synthesizes 4 years of longitudinal interviews with engineering students as they progressed through college. The interviews revolved broadly around how students saw the connections between engineering and social responsibility, and what influenced these ideas. Using the Weidman Input-Environment-Output model as a framework, this research found that influences included required classes such as engineering ethics, capstone design, and some technical courses, pre-college volunteering and familial values, co-curricular groups such as Engineers Without Borders and the Society of Women Engineers, as well as professional experiences through internships. Further, some experiences such as technical courses and engineering internships contributed to confine students' understanding of an engineer's social responsibility. Overall, students who stayed in engineering tended to converge on basic responsibilities such as safety and bettering society as a whole, but tended to become less concerned with improving the lives of the marginalized and disadvantaged. Company loyalty also became important for some students. These results have valuable, transferable contributions, providing guidance to foster students' ideas on socially responsible engineering.

English Education for Engineers in the World of Globalization : A Report of an Undergraduate and Graduate English Program with an Emphasis on Writing

NASA Astrophysics Data System (ADS)

Shimazu, Nobuko

In an increasingly globalized world, demand for engineers well versed in English remains strong. As a professor of English in the Faculty of Computer Science and Systems Engineering at the Kyushu Institute of Technology, I have sought with the aid of two associate professors to improve the English program for our engineering students together to help meet that very demand. In order to assist other English teachers in similar situations to improve their own English programs, I would like to report on the ideas and methods presently used in our undergraduate English program, specifically the first-year compulsory and common course with its emphasis on paragraph writing which students from each of the five departments within the Faculty of Computer Science and Systems Engineering are required to take. In addition, I would also like to report my ideas and teaching methods for a graduate research paper writing course. The objective of this course is to teach graduate students how to write presentations for conferences and papers for journals at the international level.

Competency Based Modular Experiments in Polymer Science and Technology.

ERIC Educational Resources Information Center

Pearce, Eli M; And Others

1980-01-01

Describes a competency-based, modular laboratory course emphasizing the synthesis and characterization of polymers and directed toward senior undergraduate and/or first-year graduate students in science and engineering. One module, free-radical polymerization kinetics by dilatometry, is included as a sample. (CS)

Start Your Engines...Start Your Year!

ERIC Educational Resources Information Center

Adair, Lila M.; Loveless, Garry C.

1994-01-01

Provides a first-week activity in which student groups brainstorm and build cars to win a race. Includes rules, suggestions, time line, and evaluation methods. Notes that many misconceptions may arise from the activity but these are dealt with in the next few weeks of class. (MVL)

Engineering for All: A Middle School Program to Introduce Students to Engineering as a Potential Social Good

ERIC Educational Resources Information Center

Hacker, Michael; Crismond, David; Hecht, Deborah; Lomask, Michal

2017-01-01

This article is the first of a two-part series about Engineering for All (EfA), a $1.7M National Science Foundation-funded project, which introduces middle school students to engineering, not only as a career path, but as an endeavor with potential for doing social good. Engineering for All opens students' eyes to the role engineers play in…

Re?Engineering of Undergraduate Science Curricula to Emphasise Development of Lifelong Learning Skills

ERIC Educational Resources Information Center

Peat, Mary; Taylor, Charlotte E.; Franklin, Sue

2005-01-01

It is increasingly important in the twenty-first century for graduates to be able to take their place in the changing world scene and to be adaptable and creative within the organisation that employs them. This paper describes some of the initiatives introduced into the curriculum of a first-year science course, taken by 1300 students at the…

Engineering Students at Typically Invisible Transition Points: A Focus on Admissions and the Sophomore Year

ERIC Educational Resources Information Center

Holloway, Elizabeth M.

2013-01-01

As of 2012, women are approximately 19% of all engineering undergraduate students nationally (American Society for Engineering Education, 2012). Women's representation in engineering has not changed significantly over the last 20 years, despite increased attention, increased funding, and increased programmatic activities intended to encourage more…

Summer Research Apprentice Program report. [Summer Research Apprentice Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curington, B.

1982-01-01

The Summer Research Apprentice Program is designed to provide students with their first look at college life while preparing them for possible careers in mathematics, science and engineering. The 23 students, enrolled as college freshmen for 8 hours of college credit, took courses in Trigonometry, College Algebra and introduction to Research (4 students were enrolled in Calculus 1 instead of Trigonometry and College Albebra). During this third year of operation, refinements were made in both the administration of the program and in the method of implementation.

Boston University Pre-Majors Program (BU Pre-Map): Promoting Diversity through First-Year Undergraduate Research

NASA Astrophysics Data System (ADS)

West, Andrew A.

2014-06-01

One of largest points of attrition for underrepresented minorities in STEM fields is the transition from high school to college. A report from Building Engineering and Science Talent (BEST) demonstrates that underrepresented minorities begin college interested in STEM fields at rates equal to (if nor slightly above) their representation in both college and the population (25%). However, by the time they graduate, underrepresented minorities make up only 15% of STEM majors and only 9% of the STEM advanced degrees. Most of the attrition occurs during the first year of college, when large classes, a lack of mentors and challenging courses lead many students (from all backgrounds) to consider other majors.In 2011 I started the Boston University Pre-Majors Program (or BU Pre-MaP), which is modeled after the University of Washington Pre-Majors in Astronomy Program (UW Pre-MAP), a program for recruiting, mentoring and training underrepresented, first-year introductory astronomy students (and of which I was an architect). As a significant part of the Pre-MAP (or Pre-MaP) model, first-year students are engaged in a research project with a faculty or grad-student mentor and learn many of the skills needed to be successful in science.The BU Pre-MaP uses weekly seminars to introduce students to BU and the college environment, discuss ways to be successful in and out of the classroom, highlights the importance of peer mentoring and cohort building and serves as a mechanism to introduce first-year students to research skills. In teams of two, the Pre-MaP students select (with assistance) a research mentor and work with him/her on a original research project.In addition, Pre-MaP students attend several field trips including (but not limited to) viewing original science documents at the Boston Public Library (including a first edition Copernicus) and an observing run at Lowell Observatory in Arizona.

Boston University Pre-Majors Program (BU Pre-Map): Promoting Diversity through First-Year Undergraduate Research

NASA Astrophysics Data System (ADS)

West, Andrew A.

2015-01-01

One of largest points of attrition for underrepresented minorities in STEM fields is the transition from high school to college. A report from Building Engineering and Science Talent (BEST) demonstrates that underrepresented minorities begin college interested in STEM fields at rates equal to (if nor slightly above) their representation in both college and the population (25%). However, by the time they graduate, underrepresented minorities make up only 15% of STEM majors and only 9% of the STEM advanced degrees. Most of the attrition occurs during the first year of college, when large classes, a lack of mentors and challenging courses lead many students (from all backgrounds) to consider other majors.In 2012 I started the Boston University Pre-Majors Program (or BU Pre-MaP), which is modeled after the University of Washington Pre-Majors in Astronomy Program (UW Pre-MAP), a program for recruiting, mentoring and training underrepresented, first-year introductory astronomy students (and of which I was an architect). As a significant part of the Pre-MAP (or Pre-MaP) model, first-year students are engaged in a research project with a faculty or grad-student mentor and learn many of the skills needed to be successful in science.The BU Pre-MaP uses weekly seminars to introduce students to BU and the college environment, discuss ways to be successful in and out of the classroom, highlights the importance of peer mentoring and cohort building and serves as a mechanism to introduce first-year students to research skills. In teams of two, the Pre-MaP students select (with assistance) a research mentor and work with him/her on a original research project.In addition, Pre-MaP students attend several field trips including (but not limited to) viewing original science documents at the Boston Public Library (including a first edition Copernicus) and an observing run at Lowell Observatory in Arizona.

The Human Dimension of Systemic Department-Level Change: A Change Agent's Retrospective on a Case of Reform

ERIC Educational Resources Information Center

Vanasupa, Linda

2011-01-01

This paper represents a narrative of the process of department-level reform through the eyes of the initiating agent of change. Over the course of reform, our program has grown by 40%, primarily through retaining students. We exhibit a 10% net important rate of engineering students in the first two years of the curriculum relative to the college's…

Engineers in the Classroom: Their Influence on African-American Students' Perceptions of Engineering

ERIC Educational Resources Information Center

Thompson, Stephen; Lyons, Jed

2008-01-01

A Draw an Engineer Test was used to capture the perceptions of engineering held by two similar groups of 6th grade African-American students. Forty-four students who had graduate level engineers in their classrooms during a prior school year as part of a GK-12 project were matched to 44 students who had not. Matching criteria included race,…

Female peers in small work groups enhance women's motivation, verbal participation, and career aspirations in engineering.

PubMed

Dasgupta, Nilanjana; Scircle, Melissa McManus; Hunsinger, Matthew

2015-04-21

For years, public discourse in science education, technology, and policy-making has focused on the "leaky pipeline" problem: the observation that fewer women than men enter science, technology, engineering, and mathematics fields and more women than men leave. Less attention has focused on experimentally testing solutions to this problem. We report an experiment investigating one solution: we created "microenvironments" (small groups) in engineering with varying proportions of women to identify which environment increases motivation and participation, and whether outcomes depend on students' academic stage. Female engineering students were randomly assigned to one of three engineering groups of varying sex composition: 75% women, 50% women, or 25% women. For first-years, group composition had a large effect: women in female-majority and sex-parity groups felt less anxious than women in female-minority groups. However, among advanced students, sex composition had no effect on anxiety. Importantly, group composition significantly affected verbal participation, regardless of women's academic seniority: women participated more in female-majority groups than sex-parity or female-minority groups. Additionally, when assigned to female-minority groups, women who harbored implicit masculine stereotypes about engineering reported less confidence and engineering career aspirations. However, in sex-parity and female-majority groups, confidence and career aspirations remained high regardless of implicit stereotypes. These data suggest that creating small groups with high proportions of women in otherwise male-dominated fields is one way to keep women engaged and aspiring toward engineering careers. Although sex parity works sometimes, it is insufficient to boost women's verbal participation in group work, which often affects learning and mastery.

Setting an Egalitarian Social Norm in the Classroom: Improving Attitudes towards Diversity among Male Engineering Students

ERIC Educational Resources Information Center

Bennett, Jill E.; Sekaquaptewa, Denise

2014-01-01

This study tested the effect of a message describing a social norm of egalitarian attitudes and behaviors in an engineering college on male students' attitudes and behavioral intentions surrounding diversity in engineering. Participants were first-semester university students enrolled in four sections of an introductory engineering course in…

Multi-Institution Study of Student Demographics and Outcomes in Electrical and Computer Engineering in the USA

ERIC Educational Resources Information Center

Lord, Susan M.; Layton, Richard A.; Ohland, Matthew W.

2015-01-01

Electrical Engineering (EE) and Computer Engineering (CpE) programs have similar curricula, but different demographics and student outcomes. This paper extends earlier longitudinal studies to a larger and more diverse dataset with 90,000 first-time-in-college and 26,000 transfer students who majored in engineering at USA institutions, including…

Structure of Black Male Students Academic Achievement in Science

NASA Astrophysics Data System (ADS)

Rascoe, Barbara

Educational policies and practices have been largely unsuccessful in closing the achievement gap between Black and White students "Schwartz, 2001". This achievement gap is especially problematic for Black students in science "Maton, Hrabrowski, - Schmitt, 2000. Given the fact that the Black-White achievement gap is still an enigma, the purpose of this article is to address the Black female-Black male academic achievement gap in science majors. Addressing barriers that Black male students may experience as college science and engineering majors, this article presents marketing strategies relative to politics, emotional intelligence, and issues with respect to how science teaching, and Black male students' responses to it, are different. Many Black male students may need to experience a paradigm shift, which structures and enhances their science achievement. Paradigm shifts are necessary because exceptional academic ability and motivation are not enough to get Black males from their first year in a science, technology, education, and mathematics "STEM" major to a bachelor's degree in science and engineering. The conclusions focus on the balance of truth-slippery slopes concerning the confluence of science teachers' further ado and Black male students' theories, methods, and values that position their academic achievement in science and engineering majors.

Lubrication System 1. Check and Change the Engine Oil. Student Manual. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual on checking and changing the engine oil is the second of three in an instructional package on the lubrication system in the Small Engine Repair Series for handicapped students. The stated purpose for the booklet is to help students learn what tools and equipment to use and all the steps of the job. Informative material and…

Characteristics Associated with Persistence and Retention among First-Generation College Students Majoring in Science, Technology, Engineering, or Math

NASA Astrophysics Data System (ADS)

Burnett, Lorie Lasseter

Persistence and retention of college students is a great concern in American higher education. The dropout rate is even more apparent among first-generation college students, as well as those majoring in science, technology, engineering, and math (STEM). More students earning STEM degrees are needed to fill the many jobs that require the skills obtained while in college. More importantly, those students who are associated with a low-socioeconomic background may use a degree to overcome poverty. Although many studies have been conducted to determine the characteristics associated with student attrition among first-generation students or STEM majors, very little information exists in terms of persistence and retention among the combined groups. The current qualitative study identified some of the characteristics associated with persistence and retention among first-generation college students who are also STEM majors. Participants were juniors or seniors enrolled at a regional 4-year institution. Face-to-face interviews were conducted to allow participants to share their personal experiences as first-generation STEM majors who continue to persist and be retained by their institution. Tinto's Theory of Individual Departure (1987) was used as a framework for the investigation. This theory emphasizes personal and academic background, personal goals, disconnecting from one's own culture, and institutional integration as predictors of persistence. The findings of the investigation revealed that persisting first-generation STEM majors are often connected to family, but have been able to separate that connection with that of the institution. They also are goal-driven and highly motivated and have had varied pre-college academic experiences. These students are academically integrated and socially integrated in some ways, but less than their non-first-generation counterparts. They are overcoming obstacles that students from other backgrounds may not experience. They receive support from their families and institution, but have diverse academic backgrounds. The findings show that a culmination of many characteristics have enabled the participants to persist and be retained by their institution.

Lincoln Advanced Science and Engineering Reinforcement (LASER) program

NASA Technical Reports Server (NTRS)

Williams, Willie E.

1989-01-01

Lincoln University, under the Lincoln Advanced Science and Engineering Reinforcement (LASER) Program, has identified and successfully recruited over 100 students for majors in technical fields. To date, over 70 percent of these students have completed or will complete technical degrees in engineering, physics, chemistry, and computer science. Of those completing the undergraduate degree, over 40 percent have gone on to graduate and professional schools. This success is attributable to well planned approaches to student recruitment, training, personal motivation, retention, and program staff. Very closely coupled to the above factors is a focus designed to achieve excellence in program services and student performance. Future contributions by the LASER Program to the pool of technical minority graduates will have a significant impact. This is already evident from the success of the students that began the first year of the program. With program plans to refine many of the already successful techniques, follow-on activities are expected to make even greater contributions to the availability of technically trained minorities. For example, undergraduate research exposure, broadened summer, and co-op work experiences will be enhanced.

Self-Control and Academic Performance in Engineering

ERIC Educational Resources Information Center

Honken, Nora; Ralston, Patricia A.; Tretter, Thomas R.

2016-01-01

Self-control has been related to positive student outcomes including academic performance of college students. Because of the critical nature of the first semester academic performance for engineering students in terms of retention and persistence in pursuing an engineering degree, this study investigated the relationship between freshmen…

Interdisciplinary Robotics Project for First-Year Engineering Degree Students

ERIC Educational Resources Information Center

Aznar, Mercedes; Zacarés, José; López, Jaime; Sánchez, Rafael; Pastor, José M.; Llorca, Jaume

2015-01-01

The acquisition of both transversal and specific competences cannot be achieved using conventional methodologies. New methodologies must be applied that promote the necessary competences for proper professional development. Interdisciplinary projects can be a suitable tool for competence-based learning. A priori, this might be complicated, as…

The Experience of Interacting with Technological Artefacts

ERIC Educational Resources Information Center

Collier-Reed, Brandon I.; Case, Jennifer M.; Linder, Cedric

2009-01-01

This article reports on an investigation into the different ways that pupils interact with technological artefacts. The results are discussed in the context of the need for first-year "introduction to engineering" courses to develop ways to provide students with an environment that facilitates their meaningful interaction with…

First Year Experiences in School of Mechanical Engineering Kanazawa University

NASA Astrophysics Data System (ADS)

Kinari, Toshiyasu; Kanjin, Yuichi; Furuhata, Toru; Tada, Yukio

This paper reports two lectures of the first year experience, ‧Lecture on Life in Campus and Society‧ and ‧Freshman Seminar‧ and discusses their effects. Both lectures have been given freshmen of the school of mechanical engineering, Kanazawa University in H20 spring term. The former lecture is aimed at freshmen to keep on a proper way in both social and college life. It consists of normal class and e-learning system lectures. E-learning system examination requires students to review the whole text book and that seems to have brought better results in the survey. The latter seminar is aimed at freshmen to get active and self-disciplined learning way through their investigation, discussion, presentation, writing work, and so on.

FIRST Robotics as a model for experiential problem-based learning: A comparison of student attitudes and interests in science, mathematics, engineering, and technology

NASA Astrophysics Data System (ADS)

Griffith, Donald Sanford, Jr.

2005-07-01

This research study was undertaken to examine potential relationships between high school students' attitudes and interests in science, mathematics, engineering, and technology, and their participation in the FIRST Robotics Competition six-week challenge to design, and build a robot. High school students' gender and race, in relationship to students' interest in the aforementioned topics was also examined in this study. A convenience sample of 727 South Carolina public high school students agreed to participate in the study. Data were collected using pre-and post-survey questionnaires. Student participants completed pre-survey questionnaires at the onset of the 2005 FIRST Robotics Competition Kick-off, concurrent with the beginning of the second semester of the 2004--2005 school year. Participants completed post-survey questionnaires after six-weeks, the period of time allocated for teams to design, build, and ship their 2005 FIRST Robotics Competition robot. Data analyzed was collected from the group of students participating in FIRST Robotics (treatment), the experimental group, and the group of students who are not participating in FIRST Robotics (control). Findings reported that the pre- and post-survey questionnaire responses regarding attitudinal change were not significantly different in either the experimental or control group. High pre-survey dependent variable scores provided by students in the FIRST group did not allow for significant gain in each of the seven-attitudinal categories. Findings also indicated that there were significant attitudinal differences between students in the experimental group (FIRST), and students the control group (SMET) pre- and post-survey responses. Students in the FIRST group had statistically significant higher attitude means than students in the SMET group on both pre- and post-surveys in the seven-attitudinal categories. The frequency for responses to each question in the three interest categories on the pre- and post-survey was calculated for the experimental and control group to evaluate differences. The results expressed in percentages indicated that there were significant differences in respondent scores for the pre-survey versus the post-survey in the FIRST group. The null hypothesis concerning interest differences of high school students that participate in the FIRST Robotics six-week challenge as compared to students that do not participate in the program was rejected.

Young Engineers & Scientists (YES) - Engaging Teachers in Space Research

NASA Astrophysics Data System (ADS)

Boice, D. C.; Reiff, P. H.

2011-12-01

The Young Engineers and Scientists (YES) Program is a community partnership between Southwest Research Institute (SwRI) and local high schools in San Antonio. It provides talented high school juniors and seniors a bridge between classroom instruction and real world, research experiences in physical sciences, information sciences, and engineering. YES consists of two parts: 1) An intensive three-week summer workshop held at SwRI where students experience the research environment first-hand; develop skills and acquire tools for solving scientific problems, attend mini-courses and seminars on electronics, C++ programming, the Internet, careers, science ethics, social impact of technology, and other topics; and select their individual research project with their mentor (SwRI staff member) to be completed during the academic year; and 2) A collegial mentorship where students complete individual research projects under the guidance of their mentors and teachers during the academic year and earn honors credit. At the end of the school year, students publicly present and display their work, acknowledging their accomplishments and spreading career awareness to other students and teachers. YES has been highly successful during the past nineteen (19) years. A total of 258 students have completed or are currently enrolled in YES. Of these students, 38% are females and 57% are ethnic minorities, reflecting the local diversity of the San Antonio area. All YES graduates have entered college, several work or have worked for SwRI, two businesses have formed, and three scientific publications have resulted. Sixteen (16) teacher participants have attended the YES workshop and have developed classroom materials based on their experiences in research at SwRI in the past three (3) years. In recognition of its excellence, YES received the Celebrate Success in 1996 and the Outstanding Campus Partner-of-the-Year Award in 2005, both from Northside Independent School District (San Antonio, Texas). Acknowledgments: We are grateful for support from the NASA MMS Mission E/PO Grant, SwRI, Northside Independent School District, and local charitable foundations.

Stereotype Threat: A Qualitative Study of the Challenges Facing Female Undergraduate Engineering Students

NASA Astrophysics Data System (ADS)

Entsminger, J. R., II

From a sociocultural point of view, this qualitative case study explored how upper-level, female undergraduate engineering students perceived the possibility of or experience with stereotype threat as shaping their experiences. The study also investigated how these students explained their reasons for choosing their engineering major, the challenges they encountered in the major, and their reasons for persevering in spite of those challenges. Using Steele and Aronson's (1995) stereotype threat theory as a framework, and considering the documented underrepresentation of females in engineering, the study sought to examine how stereotype threat shaped the experiences of these students and if stereotype threat could be considered a valid reason for the underrepresentation. The study was conducted at a large, four-year public university. First, students in the College of Engineering and Engineering Technology completed the Participant Screening Survey. Based on responses from the survey, six female engineering students from the college were identified and invited to participate in the study. The participants came from the following majors: Electrical Engineering, Industrial and Systems Engineering, and Mechanical Engineering. After receiving the study consent letter and agreeing to participate, the students were involved in a 90-minute focus group meeting, a 45-minute one-on-one interview, and a 30-minute follow-up interview. After conducting the data collection methods, the data were then transcribed, analyzed, and coded for theme development. The themes that emerged coincided with each research question. The themes highlighted the complex interactions and experiences shared by the female engineering majors. The female students were enveloped in an environment where there existed an increased risk for activating stereotype threat. In addition, the female students described feeling pushed to prove to themselves and to others that the negative stereotype that 'females are bad at engineering' was untrue. The findings illustrated the need for systematic changes at the university level. Intervention recommendations were provided. In regards to female underrepresentation in science fields, including engineering, stereotype threat certainly had the potential to cause the female students to question themselves, their abilities, their choice of an academic major, and subsequently remove themselves from a hostile learning or working environment. Thus, educational institutions and workplace organizations are responsible for not only educating themselves regarding stereotype threat, but also for taking steps to alleviate the pernicious effects of stereotype threat.

My Iowa Journey: The Life Story of the University of Iowa's First African American Professor. Singular Lives: The Iowa Series in North American Autobiography.

ERIC Educational Resources Information Center

Hubbard, Philip G.

This autobiography recounts the life story of an African American educator at the University of Iowa from 1965 to 1991, as its first African American professor and then as its first African American administrator. The book recounts his childhood and family relations, his student years at the university and his graduation as an electrical engineer,…

Increasing Opportunities and Success in Science, Math, Engineering and Technology Through Partnerships and Resource Convergence

NASA Astrophysics Data System (ADS)

Huebner, P.

2003-12-01

Bridging the geographic boundaries and providing educational opportunities is the goal of American Indian Programs at Arizona State University East. Since its inception in 1997, American Indian Programs has established programs and partnerships to provide opportunities and resources to Tribal communities throughout Arizona. From educational programs to enhance student achievement at the K-12 level to recruitment and retention of American Indian students at the post secondary level, American Indian Programs provides the resources to further the success of students in science, math, engineering and technology. Resource convergence is critical in providing opportunities to ensure the success of Indian students in science, math, engineering and technology. American Indian Programs has built successful programs based on partnerships between federal grant programs, corporate, federal and state agencies. Providing professional development for teachers, school assessment, science and math curriculum and data collection are the primary efforts at the K-12 level to increase student achievement. Enrichment programs to enhance K-12 activities include the development of the Arizona American Indian Science and Engineering Fair (the only State fair for American Indiana's in the country) supported entirely through corporate support, summer residential programs, after school activities and dual enrollment programs for high school students. ASU East's retention rate for first year students is 92 percent and 1in 6 graduating students enter graduate programs. American Indian Programs strives to build student relationships with federal, state and corporate agencies through internships and coops. This effort has led to the development of an E-mentoring program that allows students (and K-12 teachers) to work directly with practicing scientists, and engineers in research activities. New programs look to increase technology not only in Tribal schools but increase technology in the homes of students as well.

Scaling Up: Adapting a Phage-Hunting Course to Increase Participation of First-Year Students in Research.

PubMed

Staub, Nancy L; Poxleitner, Marianne; Braley, Amanda; Smith-Flores, Helen; Pribbenow, Christine M; Jaworski, Leslie; Lopatto, David; Anders, Kirk R

2016-01-01

Authentic research experiences are valuable components of effective undergraduate education. Research experiences during the first years of college are especially critical to increase persistence in science, technology, engineering, and mathematics fields. The Science Education Alliance Phage Hunters Advancing Genomics and Evolutionary Science (SEA-PHAGES) model provides a high-impact research experience to first-year students but is usually available to a limited number of students, and its implementation is costly in faculty time and laboratory space. To offer a research experience to all students taking introductory biology at Gonzaga University (n = 350/yr), we modified the traditional two-semester SEA-PHAGES course by streamlining the first-semester Phage Discovery lab and integrating the second SEA-PHAGES semester into other courses in the biology curriculum. Because most students in the introductory course are not biology majors, the Phage Discovery semester may be their only encounter with research. To discover whether students benefit from the first semester alone, we assessed the effects of the one-semester Phage Discovery course on students' understanding of course content. Specifically, students showed improvement in knowledge of bacteriophages, lab math skills, and understanding experimental design and interpretation. They also reported learning gains and benefits comparable with other course-based research experiences. Responses to open-ended questions suggest that students experienced this course as a true undergraduate research experience. © 2016 N. L. Staub et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Engaging undergradate students in interdisciplinary courses in nanotechnology

NASA Astrophysics Data System (ADS)

Goodchild, Fiona

2008-03-01

Two new courses at UCSB engage both undergraduate and graduate students in situated learning so that they can acquire the knowledge and skills they will need for future academic courses and career development. These courses are designed and taught by research faculty and education staff at the California Nanosystems Institute (CNSI) at UC Santa Barbara. The speaker, Dr. Goodchild, Education Director at CNSI, collaborated in the course design and is advisor on assessment and pedagogy for both courses. The first course, entitled INSCITES, is aimed at first and second year students who are interested in the impacts of science and technology in society. This general education course is team taught by three Graduate Teaching Scholars from across engineering, science and social sciences. They collaborate with lead faculty from Materials Science and History to design both the curriculum and instructional format for the 10 week course that is supported by the National Science Foundation. INSCITES was taught for the first time in Spring 2007 and feedback indicated that the course had convinced the undergraduate students that they would like to take further courses outside their majors. The second course, entitled the Practice of Science is open to all majors in science and engineering, especially those in second and third year who are interested in scientific research and related career opportunities. The course has been taught for the past 4 years as a two quarter course by two research faculty who focus on the nature of scientific discovery, the role of graduate researchers and faculty, the challenges of collaboration across disciplines and the mechanisms for funding research in academia and industry. In the first quarter each students is expected to identify a mentor and a research group in which they can pursue an individual research project, to be completed during the second quarter when the classes are designed to operate like research group meetings. Evaluation indicates that both courses attract students from underrepresented groups in science who value gaining a broader perspective about nanotechnology and the career opportunities that it offers to undergraduate students.

Student understanding of first order RC filters

NASA Astrophysics Data System (ADS)

Coppens, Pieter; Van den Bossche, Johan; De Cock, Mieke

2017-12-01

A series of interviews with second year electronics engineering students showed several problems with understanding first-order RC filters. To better explore how widespread these problems are, a questionnaire was administered to over 150 students in Belgium. One question asked to rank the output voltage of a low-pass filter with an AC or DC input signal while a second asked to rank the output voltages of a high-pass filter with doubled or halved resistor and capacitor values. In addition to a discussion of the rankings and students' consistency, the results are compared to the most common reasoning patterns students used to explain their rankings. Despite lecture and laboratory instruction, students not only rarely recognize the circuits as filters, but also fail to correctly apply Kirchhoff's laws and Ohm's law to arrive at a correct answer.

Technology reinvestment project manufacturing education and training: Engineering education in manufacturing across the curriculum. Annual report, June 24, 1994--June 23, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mulholland, G.; Powers, T.L.

1995-09-29

The goal of this project is to impart to engineering and business students, and to students from industry, the broad knowledge and practical skills to immediately help a manufacturing company become more competitive in any global economy while still providing a high quality work force for the 21st century. An integration of innovative, cross-disciplinary, manufacturing engineering and business education provided hand in hand with industry, will enable students, especially minority students, to have a real impact on manufacturing in this depressed region. The program was shortened and simplified to meet a budget of $2,000,000 versus the $3,000,000 in the-Proposal. Allmore » major objectives in the revised plan for the first year have been achieved with expenditures somewhat under the revised budget. Curriculum development with the advice and assistance of industry is ahead of schedule. Graduate minor degree curricula have been defined in Engineering and in Business. A summer intern project and guest lecture series have been well supported by industry. Facilities including advanced software have been brought on line. Cash and in-kind matching funds from industry, NMSU and the State total over $6m; this is 920% of the TRP funds expended. Cost sharing of cash is ahead of plan, of in-kind is slightly behind. The first group of 21 students have started one semester sooner than planned. The group is 25% minority and 45% female. Industry requests to interview graduates are coming in anticipation of availability in the spring of 1996.« less

Problem Solving and Engineering Design, Introducing Bachelor Students to Engineering Practice at K. U. Leuven

ERIC Educational Resources Information Center

Heylen, Christel; Smet, Marc; Buelens, Hermans; Sloten, Jos Vander

2007-01-01

A present-day engineer has a large scientific knowledge; he is a team-player, eloquent communicator and life-long learner. At the Katholieke Universiteit Leuven, the course "Problem Solving and Engineering Design" introduces engineering students from the first semester onwards into real engineering practice and teamwork. Working in small…

Supplemental Instruction for Improving First Year Results in Engineering Studies

ERIC Educational Resources Information Center

Malm, Joakim; Bryngfors, Leif; Morner, Lise-Lotte

2012-01-01

Many studies have been made on the impact of supplemental instruction in supported courses, with most showing significantly better examination results for students attending supplemental instruction in comparison to those who do not. However, remarkably little attention has been devoted to following up whether the benefits of supplemental…

A Hurricane for Physics Students.

ERIC Educational Resources Information Center

Mayo, Ned

1994-01-01

Describes how the study of a hurricane can be used to provide integrated basic mechanics in a first-year college course in engineering mechanics. Presents models that predict wind speed given surface eye pressure and several radial dimensions of the storm and calculate total kinetic energy once the wind speed is determined. (ZWH)

Reduction of Dissolved Oxygen at a Copper Rotating Disc Electrode

ERIC Educational Resources Information Center

Kear, Gareth; Albarran, Carlos Ponce-de-Leon; Walsh, Frank C.

2005-01-01

Undergraduates from chemical engineering, applied chemistry, and environmental science courses, together with first-year postgraduate research students in electrochemical technology, are provided with an experiment that demonstrates the reduction of dissolved oxygen in aerated seawater at 25°C. Oxygen reduction is examined using linear sweep…

An Instructional Design Framework to Improve Student Learning in a First-Year Engineering Class

ERIC Educational Resources Information Center

Yelamarthi, Kumar; Drake, Eron; Prewett, Matthew

2016-01-01

Increasingly, numerous universities have identified benefits of flipped learning environments and have been encouraging instructors to adapt such methodologies in their respective classrooms, at a time when departments are facing significant budget constraints. This article proposes an instructional design framework utilized to strategically…

Use of the "Moodle" Platform to Promote an Ongoing Learning When Lecturing General Physics in the Physics, Mathematics and Electronic Engineering Programmes at the University of the Basque Country UPV/EHU

ERIC Educational Resources Information Center

López, Gabriel A.; Sáenz, Jon; Leonardo, Aritz; Gurtubay, Idoia G.

2016-01-01

The "Moodle" platform has been used to put into practice an ongoing evaluation of the students' Physics learning process. The evaluation has been done on the frame of the course General Physics, which is lectured during the first year of the Physics, Mathematics and Electronic Engineering Programmes at the Faculty of Science and…

NASA Propulsion Engineering Research Center, volume 1

NASA Technical Reports Server (NTRS)

1993-01-01

Over the past year, the Propulsion Engineering Research Center at The Pennsylvania State University continued its progress toward meeting the goals of NASA's University Space Engineering Research Centers (USERC) program. The USERC program was initiated in 1988 by the Office of Aeronautics and Space Technology to provide an invigorating force to drive technology advancements in the U.S. space industry. The Propulsion Center's role in this effort is to provide a fundamental basis from which the technology advances in propulsion can be derived. To fulfill this role, an integrated program was developed that focuses research efforts on key technical areas, provides students with a broad education in traditional propulsion-related science and engineering disciplines, and provides minority and other under-represented students with opportunities to take their first step toward professional careers in propulsion engineering. The program is made efficient by incorporating government propulsion laboratories and the U.S. propulsion industry into the program through extensive interactions and research involvement. The Center is comprised of faculty, professional staff, and graduate and undergraduate students working on a broad spectrum of research issues related to propulsion. The Center's research focus encompasses both current and advanced propulsion concepts for space transportation, with a research emphasis on liquid propellant rocket engines. The liquid rocket engine research includes programs in combustion and turbomachinery. Other space transportation modes that are being addressed include anti-matter, electric, nuclear, and solid propellant propulsion. Outside funding supports a significant fraction of Center research, with the major portion of the basic USERC grant being used for graduate student support and recruitment. The remainder of the USERC funds are used to support programs to increase minority student enrollment in engineering, to maintain Center infrastructure, and to develop research capability in key new areas. Significant research programs in propulsion systems for air and land transportation complement the space propulsion focus. The primary mission of the Center is student education. The student program emphasizes formal class work and research in classical engineering and science disciplines with applications to propulsion.

Soft Skills in Pedagogical Practices with Different Curriculum for Engineering Education

NASA Astrophysics Data System (ADS)

Mohamad, M. M.; Yee, M. H.; Tee, T. K.; Mukhtar, M. Ibrahim; Ahmad, A.

2017-08-01

The rapid growth of the economy in Malaysia is a benchmark for the country’s progress. The demand for skilled worker has started to increase from year to year resulted in the implementation of reforms and necessary skills will be applied to each of the graduates who will step into the nature of work. Therefore, a study was conducted to identify the level of soft skills among students in higher education institutions. The study was conducted at the Universiti Tun Hussein Onn Malaysia (UTHM) and involved 302 samples of final year students from Faculty of Civil Engineering, Faculty of Mechanical Engineering and the Faculty of Electrical Engineering. There are several types of soft skills have been viewed on the students such as creative thinking skills, teamwork skills, communication skills, decision-making skills, interpersonal skills and leadership skills. The analysis results show that all of the soft skills are on the high level. Furthermore, the results of ANOVA showed a significant difference in soft skills mastery among Civil Engineering students and Mechanical Engineering students. As a conclusion, the overall level of soft skills mastery among Faculty of Civil Engineering, Faculty of Mechanical Engineering and the Faculty of Electrical Engineering students is on the high level. The soft skills elements are very important in order to produce skills workers that suitable with the industry.

The Web and Information Literacy: Scaffolding the use of Web Sources in a Project-Based Curriculum

ERIC Educational Resources Information Center

Walton, Marion; Archer, Arlene

2004-01-01

In this article we describe and discuss a three-year case study of a course in web literacy, part of the academic literacy curriculum for first-year engineering students at the University of Cape Town (UCT). Because they are seen as practical knowledge, not theoretical, information skills tend to be devalued at university and rendered invisible to…

Reassessing the English Course Offered to Computer Engineering Students at the National School of Applied Sciences of Al-Hoceima in Morocco: An Action Research Project

ERIC Educational Resources Information Center

Dahbi, M.

2015-01-01

In computer engineering education, specific English language practices are needed to enable computer engineering students to succeed in professional settings. This study was conducted for two purposes. First, it aimed at investigating to what extent the English courses offered to computer engineering students at the National School of Applied…

Students' conceptual difficulties in hydrodynamics

NASA Astrophysics Data System (ADS)

Suarez, Alvaro; Kahan, Sandra; Zavala, Genaro; Marti, Arturo C.

2017-12-01

We describe a study on the conceptual difficulties faced by college students in understanding hydrodynamics of ideal fluids. This study was based on responses obtained in hundreds of written exams complemented with several oral interviews, which were held with first-year engineering and science university students. Their responses allowed us to identify a series of misconceptions unreported in the literature so far. The study findings demonstrate that the most critical difficulties arise from the students' inability to establish a link between the kinematics and dynamics of moving fluids, and from a lack of understanding regarding how different regions of a system interact.

The experiences of African-American students majoring in engineering: Cognitive, non-cognitive and situational aspects

NASA Astrophysics Data System (ADS)

Hill, Gloria Pinckney

1997-12-01

To understand the causes for the disproportionately high rate of attrition among ethnic minority students, it is important to consider not only how they differ from the majority population, but what differences exist in personal qualities and academic preparation within groups at particular types of institutions, and within particular majors. The purpose of this study is to examine the experiences of African-American students enrolled in engineering at a predominately white, selective research university to determine which cognitive, non-cognitive and situational variables impact their progress towards graduation. The goal was to see how African-American students who meet or exceed the minimum criteria for admission perceive their experience on campus, and what strategies they use to manage their day-to-day existence. The study was conducted using personal interviews guided by an open-ended questionnaire. The qualitative methodology allowed students to assess the college experience through their own cultural lens, and to identify the cognitive, non-cognitive, and situational variables important to them. Responses were sorted by class and gender, tabulated and grouped into categories. Interpretation was primarily descriptive. Consistencies, inconsistencies, patterns and relationships to concepts in the literature and to the research questions were discussed. Findings indicate that well prepared students become less confident about their commitment to engineering and their ability to succeed academically after they begin matriculating rather than before, and that redefinition of what it means to be academically successful is an effective coping mechanism to sustain the effort required to master courses. The study suggests that the current focus on the impact of the freshman year transition on student retention should be expanded to include the sophomore year. This is particularly true for institutions where engineering students spend the first year in a core curriculum, then move into specific disciplines as sophomores. The perception of their ability among non-minority peers, assertively utilizing resources and services, the absence of a critical mass of African-American students, and participation in study groups were among the variables thought to influence their success.

Dual Enrollment Academy Programs

ERIC Educational Resources Information Center

Gonzalez, Nicolas; Chavez, Guadalupe

2009-01-01

Dual Enrollment Engineering (DEEA) and Medical Science (DEMSA) Academies are two-year dual enrollment programs for high school students. Students explore engineering and medical careers through college coursework. Students prepare for higher education in engineering and medical fields while completing associate degrees in biology or engineering…

Student Autonomy and its Effects on Student Enjoyment in a Traditional Mechanics Course for First-Year Engineering Students

NASA Astrophysics Data System (ADS)

Perera, Janaki I.; Quinlivan, Brendan T.; Simonovich, Jennifer A.; Towers, Emily; Zadik, Oren H.; Zastavker, Yevgeniya V.

2012-02-01

In light of recent literature in educational psychology, this study investigates instructional support and students' autonomy at a small technical undergraduate school. Grounded theory is used to analyze twelve semi-structured open-ended interviews about engineering students' experiences in Introductory Mechanics that includes Lecture, Recitation, and Laboratory components. Using data triangulation with each course component as a unit of analysis, this study examines students' course enjoyment as a function of instructional support and autonomy. The Lecture utilizes traditional instructor-centered pedagogy with predominantly passive learning and no student autonomy. The Recitation creates an active learning environment through small group work with a moderate degree of autonomy. The Laboratory is designed around self-guided project-based activities with significant autonomy. Despite these differences, all three course components provide similar levels of instructional support. The data reveal that students enjoy the low autonomy provided by Lecture and Recitations while finding the Laboratory frustrating. Analyses indicate that the differences in autonomy contribute to students' misinterpretation of the three course components' value within the context of the entire course.

Fitting in and feeling good: the relationships among peer alignment, instructor connectedness, and self-efficacy in undergraduate satisfaction with engineering

NASA Astrophysics Data System (ADS)

Micari, Marina; Pazos, Pilar

2016-07-01

This study examined the relationships among peer alignment (the feeling that one is similar in important ways to one's engineering peers), instructor connectedness (the sense that one knows and looks up to academic staff/faculty members in the department), self-efficacy for engineering class work (confidence in one's ability to successfully complete engineering class work), and engineering students' satisfaction with the major. A total of 135 sophomore (second-year university students) and junior (third-year students) engineering students were surveyed to measure these three variables. A multiple regression analysis showed that self-efficacy, peer alignment, and instructor connectedness predicted student satisfaction with the major, and that self-efficacy acted as a mediator between both peer alignment and instructor connectedness on the one hand, and satisfaction on the other. The authors offer suggestions for practice based on the results.

Degree program changes and curricular flexibility: Addressing long held beliefs about student progression

NASA Astrophysics Data System (ADS)

Ricco, George Dante

In higher education and in engineering education in particular, changing majors is generally considered a negative event - or at least an event with negative consequences. An emergent field of study within engineering education revolves around understanding the factors and processes driving student changes of major. Of key importance to further the field of change of major research is a grasp of large scale phenomena occurring throughout multiple systems, knowledge of previous attempts at describing such issues, and the adoption of metrics to probe them effectively. The problem posed is exacerbated by the drive in higher education institutions and among state legislatures to understand and reduce time-to-degree and student attrition. With these factors in mind, insights into large-scale processes that affect student progression are essential to evaluating the success or failure of programs. The goals of this work include describing the current educational research on switchers, identifying core concepts and stumbling blocks in my treatment of switchers, and using the Multiple Institutional Database for Investigating Engineering Longitudinal Development (MIDFIELD) to explore how those who change majors perform as a function of large-scale academic pathways within and without the engineering context. To accomplish these goals, it was first necessary to delve into a recent history of the treatment of switchers within the literature and categorize their approach. While three categories of papers exist in the literature concerning change of major, all three may or may not be applicable to a given database of students or even a single institution. Furthermore, while the term has been coined in the literature, no portable metric for discussing large-scale navigational flexibility exists in engineering education. What such a metric would look like will be discussed as well as the delimitations involved. The results and subsequent discussion will include a description of changes of major, how they may or may not have a deleterious effect on one's academic pathway, the special context of changes of major in the pathways of students within first-year engineering programs students labeled as undecided, an exploration of curricular flexibility by the construction of a novel metric, and proposed future work.

An exploration of students' perceptions and attitudes towards creativity in engineering education

NASA Astrophysics Data System (ADS)

Waller, David R.

This study used a mixed methods approach to develop a broad and deep understanding of students’ perceptions towards creativity in engineering education. Studies have shown that students’ attitudes can have an impact on their motivation to engage in creative behavior. Using an ex-post facto independent factorial design, attitudes of value towards creativity, time for creativity, and creativity stereotypes were measured and compared across gender, year of study, engineering discipline, preference for open-ended problem solving, and confidence in creative abilities. Participants were undergraduate engineering students at Queen’s University from all years of study. A qualitative phenomenological methodology was adopted to study students’ understandings and experiences with engineering creativity. Eleven students participated in oneon- one interviews that provided depth and insight into how students experience and define engineering creativity, and the survey included open-ended items developed using the 10 Maxims of Creativity in Education as a guiding framework. The findings from the survey suggested that students had high value for creativity, however students in fourth year or higher had less value than those in other years. Those with preference for open-ended problem solving and high confidence valued creative more than their counterparts. Students who preferred open-ended problem solving and students with high confidence reported that time was less of a hindrance to their creativity. Males identified more with creativity stereotypes than females, however overall they were both low. Open-ended survey and interview results indicated that students felt they experienced creativity in engineering design activities. Engineering creativity definitions had two elements: creative action and creative characteristic. Creative actions were associated with designing, and creative characteristics were predominantly associated with novelty. Other barriers that emerged from the qualitative analysis were lack of opportunity, lack of assessment, and discomfort with creativity. It was concluded that a universal definition is required to establish clear and aligned understandings of engineering creativity. Instructors may want to consider demonstrating value by assessing creativity and establishing clear criteria in design projects. It is recommended that students be given more opportunities for practice through design activities and that they be introduced to design and creative thinking concepts early in their engineering education.

Science and Engineering Technician Curriculum Development Project. Final Report.

ERIC Educational Resources Information Center

Mowery, Donald R.; Wolf, Lawrence J.

Project SET (Science and Engineering for Technicians) developed a series of study guides designed to teach generic science and engineering skills to students interested in becoming technicians. An entire 2-year curriculum is encompassed by these guides, geared for 2-year college students. Described in this final report are the project's rationale,…

A Self-Assessment of the Propensity to Obtain Future Employment: A Case of Final-Year Engineering Students at the University of Botswana

ERIC Educational Resources Information Center

Ssegawa, Joseph K.; Kasule, Daniel

2017-01-01

The article provides a self-assessment by final-year engineering students at the University of Botswana regarding the propensity to get employment. Students rated which employability attributes are important, the level of attainment and the sources that have facilitated the development of the attributes. Results indicated that students identified…

An Engineering Student's Guide to the Humanities & Social Sciences.

ERIC Educational Resources Information Center

Association of American Colleges, Washington, DC.

Undergraduate engineering students and their advisors are provided with a handbook to help improve the quality and coherence of the humanities and social sciences (H&SS) component of undergraduate engineering education (fostering more purposeful H&SS course selection). The first of this handbook's three sections has an engineering major…

Role of physics in Saudi engineering education

NASA Astrophysics Data System (ADS)

Ahmed, M.

1984-05-01

In recent years some engineering schools in the Middle East have proposed reducing the amount of basic science courses in their curricula. A conference on engineering education in the Arabian Gulf countries held in Kuwait in 1980 suggested that the number of courses in physics and chemistry should be reduced from the present level (Jamjoom 1980). The arguments often put forward can be summarised as follows. First, engineering students are at present overburdened with too many basic science courses which puts a strain on the average student. This in turn leads to a high drop-out as is witnessed in many engineering colleges in this region. This drop-out, as high as 20% in some Saudi universities, is a cause of great concern among the university authorities. Secondly, it is argued that the number of credit hours allocated to departmental requirements is not sufficient to give a student enough breadth and depth of knowledge in his specialisation in particular engineering branches. Universities in Saudi Arabia follow the American credit-hour system in which courses are given certain credit hours, ranging from two to four, depending on the number of lectures per week as well as laboratory and tutorial requirements. Engineering students have to complete about 150 credit hours to graduate, which they normally do in four to five years. Out of these credit hours, about two-thirds are allocated to core courses (including physics) common to all branches of engineering. The remaining one-third are reserved for departmental specialisation. Since there is no possibility of increasing the overall credit hours necessary for graduation, it is suggested that the extra credit hours demanded for increasing the number of departmental courses should be obtained by correspondingly curtailing those for the basic sciences. When carefully scrutinised the arguments do not appear to be well founded. The reasons for high drop-out can be traced to more deep-rooted factors.

Engineering design in the primary school: applying stem concepts to build an optical instrument

NASA Astrophysics Data System (ADS)

King, Donna; English, Lyn D.

2016-12-01

Internationally there is a need for research that focuses on STEM (Science, Technology, Engineering and Mathematics) education to equip students with the skills needed for a rapidly changing future. One way to do this is through designing engineering activities that reflect real-world problems and contextualise students' learning of STEM concepts. As such, this study examined the learning that occurred when fifth-grade students completed an optical engineering activity using an iterative engineering design model. Through a qualitative methodology using a case study design, we analysed multiple data sources including students' design sketches from eight focus groups. Three key findings emerged: first, the collaborative process of the first design sketch enabled students to apply core STEM concepts to model construction; second, during the construction stage students used experimentation for the positioning of lenses, mirrors and tubes resulting in a simpler 'working' model; and third, the redesign process enabled students to apply structural changes to their design. The engineering design model was useful for structuring stages of design, construction and redesign; however, we suggest a more flexible approach for advanced applications of STEM concepts in the future.

Implementing large projects in software engineering courses

NASA Astrophysics Data System (ADS)

Coppit, David

2006-03-01

In software engineering education, large projects are widely recognized as a useful way of exposing students to the real-world difficulties of team software development. But large projects are difficult to put into practice. First, educators rarely have additional time to manage software projects. Second, classrooms have inherent limitations that threaten the realism of large projects. Third, quantitative evaluation of individuals who work in groups is notoriously difficult. As a result, many software engineering courses compromise the project experience by reducing the team sizes, project scope, and risk. In this paper, we present an approach to teaching a one-semester software engineering course in which 20 to 30 students work together to construct a moderately sized (15KLOC) software system. The approach combines carefully coordinated lectures and homeworks, a hierarchical project management structure, modern communication technologies, and a web-based project tracking and individual assessment system. Our approach provides a more realistic project experience for the students, without incurring significant additional overhead for the instructor. We present our experiences using the approach the last 2 years for the software engineering course at The College of William and Mary. Although the approach has some weaknesses, we believe that they are strongly outweighed by the pedagogical benefits.

Understanding First Generation College Student Experiences and Interaction with Belongingness, Identity, and Social Capital: An Explanatory Mixed Method Study

NASA Astrophysics Data System (ADS)

Boone, Hank Joseph Reyes

This master's thesis is a mixed method explanatory study focusing on First Generation College student's (FGS) engineering degree experiences. Constructs used to understand their experiences were future time perspective, belongingness, engineering identity, social capital, and social identity complexity. An upper level engineering students' communications class was surveyed at a western land grant institution. Analysis showed FGS had more engineering belongingness than peers having at least one parent graduate college. The qualitative population was then upper level engineering FGS who reported high belongingness. Data showed the five interview participants communicated belongingness in terms of engineering identity. They became an engineer when they had experiences using engineering knowledge. Participants often accessed parents and family to make academic and career decisions, but some accessed more individuals (i.e. professors, engineers, peers). Lastly, participants appeared to compartmentalize their FGS identity to outside the engineering classroom while they formed their engineering identity through the degree program.

Engineering students' experiences and perceptions of workplace problem solving

NASA Astrophysics Data System (ADS)

Pan, Rui

In this study, I interviewed 22 engineering Co-Op students about their workplace problem solving experiences and reflections and explored: 1) Of Co-Op students who experienced workplace problem solving, what are the different ways in which students experience workplace problem solving? 2) How do students perceive a) the differences between workplace problem solving and classroom problem solving and b) in what areas are they prepared by their college education to solve workplace problems? To answer my first research question, I analyzed data through the lens of phenomenography and I conducted thematic analysis to answer my second research question. The results of this study have implications for engineering education and engineering practice. Specifically, the results reveal the different ways students experience workplace problem solving, which provide engineering educators and practicing engineers a better understanding of the nature of workplace engineering. In addition, the results indicate that there is still a gap between classroom engineering and workplace engineering. For engineering educators who aspire to prepare students to be future engineers, it is imperative to design problem solving experiences that can better prepare students with workplace competency.

Educating the engineers of 2020: An outcomes-based typology of engineering undergraduates

NASA Astrophysics Data System (ADS)

Knight, David B.

Members of government and industry have called for greater emphasis within U.S. colleges and universities on producing engineers who can enter and advance a more competitive, globally connected workforce. Looking toward this future, engineers will need to exhibit strong analytical skills as in the past, but they also will need to be proficient in a cadre of new abilities to compete. This study examines, in combination, an array of knowledge and skills aligned with the National Academy of Engineering's "engineer of 2020." The study has two major goals. The first is to develop a typology of engineering students based on the learning outcomes associated with the engineer of E2020. The second is to understand the educational experiences that distinguish these groups of students who resemble, more or less, the engineer of 2020. This approach acknowledges that engineering graduates need a complex skill set to succeed in the new global economy; it is the combination of skills associated with the engineer of 2020, not the individual skills in isolation, which will ensure graduates can respond to workforce needs of the future. To date, research on student outcomes has studied learning outcomes independent of one another rather than investigating student learning holistically. The study uses student data from the Prototype to production: Processes and conditions for preparing the Engineer of 2020 study, sponsored by the National Science Foundation (NSF EEC-0550608). Engineering students from a nationally representative sample of engineering programs in the United States answered a survey that collected information on their pre-college academic preparation and sociodemographic characteristics, their curricular and co-curricular experiences in their engineering programs, and their self-ratings of their engineering-related competencies. Only data on engineering students in their senior year (n=2,422) were utilized in analyses. Analyses were conducted in multiple phases for each of five engineering disciplines in the data set (biomedical/bioengineering, chemical, civil, electrical, and mechanical engineering). First, cluster analyses produced typologies (or groupings) of engineering seniors (one for each of five engineering disciplines studied and an "all engineering" analysis) based on nine self-reported learning outcomes, including fundamental skills, design skills, contextual awareness, interdisciplinary competence, and professional skills. Second, profiles of pre-college characteristics as well as student experiences in college were developed for each discipline and the five disciplines combined. Using analyses of variance, Chi-square analyses, and multinomial logistic regression, this phase also identified differences in student characteristics and college experiences between clusters of students reporting high proficiencies on the array of outcomes and students in other clusters. This second phase informed the third phase, which produced parsimonious models that used pre-college characteristics and student experience variables to predict cluster membership. As a whole, the findings demonstrate that analyses that include the full array of E2020 learning outcomes produce meaningful typologies that distinguish between groupings of students in different engineering fields. Findings demonstrate that a subset of students - the engineers of 2020 - report high skills and abilities on the full array of learning outcomes. These are the graduates sought by both the federal government and industry who most closely resemble the engineers of 2020. In addition, distinctive curricular and co-curricular experiences distinguish this E2020 group of students in each engineering discipline from other groupings of students in that same discipline. These findings have valuable implications for practice because they identify an array of discipline-specific, in- and out-of-class learning experiences that appear to promote the development of this multi-dimensional set of outcomes. Overall, however, greater curricular emphases on broad and systems perspectives in the engineering curriculum most consistently set apart the students who report high proficiencies on the E2020 outcomes. The findings also indicate that strategies for improving undergraduate engineering outcomes should be tailored by engineering discipline. The study contributes to both practice and research by developing a technique that can be used to create an outcomes-based typology that can be applied to any set of learning outcomes. Graphical representations of results consolidate large quantities of information into an easily accessible format so that findings can guide both practitioners and policymakers who seek to improve this multi-dimensional set of undergraduate engineering learning outcomes. Future directions for research, including operationalizing organizational contexts influencing E2020 learning outcomes as well as anticipated career trajectories of students across the typology, are also discussed.

Approaches to Learning in a Second Year Chemical Engineering Course.

ERIC Educational Resources Information Center

Case, Jennifer M.; Gunstone, Richard F.

2003-01-01

Investigates student approaches to learning in a second year chemical engineering course by means of a qualitative research project which utilized interview and journal data from a group of 11 students. Identifies three approaches to learning: (1) conceptual; (2) algorithmic; and (3) information-based. Presents student responses to a series of…

Women in science & engineering and minority engineering scholarships : year 5.

DOT National Transportation Integrated Search

2011-06-01

Support will make scholarships available to minority and women students interested in engineering and science and will increase : significantly the number of minority and female students that Missouri S&T can recruit to its science and engineering pr...

Women in science & engineering and minority engineering scholarships : year 4.

DOT National Transportation Integrated Search

2010-04-01

Support will make scholarships available to minority and women students interested in engineering and science and will increase : significantly the number of minority and female students that Missouri S&T can recruit to its science and engineering pr...

The Ruptured Pipeline: Analysis of the Mining Engineering Faculty Pipeline

NASA Astrophysics Data System (ADS)

Poulton, M.

2011-12-01

The booming commodities markets of the past seven years have created an enormous demand for economic geologists, mining engineers, and extractive metallurgists. The mining sector has largely been recession proof due to demand drivers coming from developing rather than developed nations. The strong demand for new hires as well as mid-career hires has exposed the weakness of the U.S. university supply pipeline for these career fields. A survey of mining and metallurgical engineering faculty and graduate students was conducted in 2010 at the request of the Society for Mining, Metallurgy, and Exploration. The goals of the surveys were to determine the demographics of the U.S. faculty in mining and metallurgical engineering, the expected faculty turn over by 2010 and the potential supply of graduate students as the future professorate. All Mining Engineering and Metallurgical Engineering degrees in the U.S. are accredited by the Accreditation Board for Engineering and Technology (ABET) and the specific courses required are set by the sponsoring professional society, Society for Mining, Metallurgy, and Exploration. There are 13 universities in the U.S. that offer a degree in Mining Engineering accredited as Mining Engineering and 1 university that grants a Mining Engineering degree accredited under general engineering program requirements. Faculty numbers are approximately 87 tenure track positions with a total undergraduate enrollment of slightly over 1,000 in the 2008-2009 academic year. There are approximately 262 graduate students in mining engineering in the U.S. including 87 Ph.D. students. Mining Engineering department heads have identified 14 positions open in 2010 and 18 positions expected to be open in the next 5 years and an additional 21 positions open by 2020. The current survey predicts a 56% turn over in mining faculty ranks over the next 10 years but a retirement of 100% of senior faculty over 10 years. 63% of graduate students say they are interested in a university career at some point in their lives but only 6% of the PhD respondents had applied for the open positions. 69% of Ph.D. students in the survey had graduation dates that would have made them eligible to apply for the open positions. 51% of the responding graduate students are US citizens. Full time graduate student enrollment would have to increase by 75% in order to provide enough graduate students to meet tenure and promotion expectations for mining engineering faculty in the U.S. New research funding on the order of $17M per year would have to be supplied to sustain the mining engineering faculty at a level expected of most R1 engineering colleges. Salaries for new faculty hires are comparable to those offered to BSc graduates by industry. The difficulties in achieving tenure due to lack of government research funding have made academic careers unattractive. If a solution is not found soon to refill the faculty pipeline, the U.S. is in danger of losing nearly all of its capacity to educate students in mining engineering.

Starting System 2. Repair the Starter Rewind Spring. Student Manual. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual on repairing the starter rewind spring on a small gas engine is the third of three in an instructional package on the starting system in the Small Engine Repair Series for handicapped students. The stated purpose for the booklet is to help students learn what tools and equipment to use in repairing the starter rewind spring and…

Global Power Play--Competition Winners Light Up the World

ERIC Educational Resources Information Center

Tech Directions, 2012

2012-01-01

This year's "Tech Directions" Inventors Competition asked students to come up with ways to provide electricity to remote villages that traditional electrical utilities have not yet reached. This article presents the results of the judging by inventor/electrical engineer Harry T. Roman. The winners are: (1) First Place--Scott Hulver,…

Promoting Higher Order Thinking Skills Using Inquiry-Based Learning

ERIC Educational Resources Information Center

Madhuri, G. V.; Kantamreddi, V. S. S. N; Prakash Goteti, L. N. S.

2012-01-01

Active learning pedagogies play an important role in enhancing higher order cognitive skills among the student community. In this work, a laboratory course for first year engineering chemistry is designed and executed using an inquiry-based learning pedagogical approach. The goal of this module is to promote higher order thinking skills in…

Wikipedia and Psychology: Coverage of Concepts and Its Use by Undergraduate Students

ERIC Educational Resources Information Center

Schweitzer, N. J.

2008-01-01

The online encyclopedia Wikipedia is a frequently referred-to source of information for Internet users. A series of 3 studies examined Wikipedia's coverage of psychology-related concepts, examined how accessible Wikipedia's psychology content is when using Internet search engines, and described how both first-year and senior undergraduates use…

Redeveloping Nicosia International Airport: An Extroverting Y2 Group Design Project

ERIC Educational Resources Information Center

Yiatros, S.

2017-01-01

This article follows the timeline of the "Nicosia International Airport: The Return" Integrated Design Project which was undertaken by Year 2 students of Civil Engineering and Geomatics at the Cyprus University of Technology in Cyprus. The Nicosia International Airport was the first and main airport of the Republic of Cyprus since its…

Teacher's Experiences in PBL: Implications for Practice

ERIC Educational Resources Information Center

Alves, Anabela C.; Sousa, Rui M.; Fernandes, Sandra; Cardoso, Elisabete; Carvalho, Maria Alice; Figueiredo, Jorge; Pereira, Rui M. S.

2016-01-01

Project-Based Learning (PBL) has been implemented in the first year of the Industrial Engineering and Management programme at the University of Minho, Portugal, since 2004/2005. The purpose of this paper is to analyse and discuss teachers' experiences in PBL in this programme and to explore its implications for student learning and for teaching…

First-Year Effects of an Engineering Professional Development Program on Elementary Teachers

ERIC Educational Resources Information Center

Yoon, So Yoon; Diefes-Dux, Heidi; Strobel, Johannes

2013-01-01

The ultimate objective of teacher professional development (TPD) is to deliver a positive impact on students' engagement and performance in class through teacher practice via improving their content and pedagogical content knowledge and changing their attitudes toward the subject being taught. However, compared to other content areas, such as…

When Academics Integrate Research Skill Development in the Curriculum

ERIC Educational Resources Information Center

Willison, J. W.

2012-01-01

This study considered outcomes when 27 academics explicitly developed and assessed student research skills in 28 regular (non-research methods) semester-length courses. These courses ranged from small (n = 17) to medium-large (n = 222) and included those from first year to masters in business, engineering, health science, humanities and science,…

Evaluating Psychosocial Mechanisms Underlying STEM Persistence in Undergraduates: Evidence of Impact from a Six-Day Pre–College Engagement STEM Academy Program

PubMed Central

Findley-Van Nostrand, Danielle; Pollenz, Richard S.

2017-01-01

The persistence of undergraduate students in science, technology, engineering, and mathematics (STEM) disciplines is a national issue based on STEM workforce projections. We implemented a weeklong pre–college engagement STEM Academy (SA) program aimed at addressing several areas related to STEM retention. We validated an instrument that was developed based on existing, validated measures and examined several psychosocial constructs related to STEM (science identity, self-efficacy, sense of belonging to the university and to STEM, career expectancies, and intention to leave STEM majors) before and after the program. We also compared students in the SA program with a matched comparison group of first-year students. Results show that SA students significantly increased in science identity and sense of belonging to STEM and to the university, all predictive of increased STEM retention and a primary aim of the program. Relative to the matched comparison group, SA students began their first semester with higher STEM self-efficacy, sense of belonging, and science identity, positive career expectancies, and lower intention to leave STEM. The SA cohort showed 98% first-year retention and 92% STEM major retention. The SA program serves as a model of a scalable, first-level, cocurricular engagement experience to enhance psychosocial factors that impact undergraduate persistence in STEM. PMID:28572178

Engineering-Based Problem Solving in the Middle School: Design and Construction with Simple Machines

ERIC Educational Resources Information Center

English, Lyn D.; Hudson, Peter; Dawes, Les

2013-01-01

Incorporating engineering concepts into middle school curriculum is seen as an effective way to improve students' problem-solving skills. A selection of findings is reported from a science, technology, engineering and mathematics (STEM)-based unit in which students in the second year (grade 8) of a three-year longitudinal study explored…

Introducing Engineering in Elementary Education: A 5-Year Study of Teachers and Students

ERIC Educational Resources Information Center

Diefes-Dux, Heidi A.

2015-01-01

Engineering, when integrated into K-12 education, may offer a number of potential student learning and future success benefits. In a 5-year study, four cohorts of elementary teachers of grades 2 to 4 in a single US school district were provided with teacher professional development with engineering education. Teachers were prepared to teach…

Adapting Experiential Learning to Develop Problem-Solving Skills in Deaf and Hard-of-Hearing Engineering Students.

PubMed

Marshall, Matthew M; Carrano, Andres L; Dannels, Wendy A

2016-10-01

Individuals who are deaf and hard-of-hearing (DHH) are underrepresented in science, technology, engineering, and mathematics (STEM) professions, and this may be due in part to their level of preparation in the development and retention of mathematical and problem-solving skills. An approach was developed that incorporates experiential learning and best practices of STEM instruction to give first-year DHH students enrolled in a postsecondary STEM program the opportunity to develop problem-solving skills in real-world scenarios. Using an industrial engineering laboratory that provides manufacturing and warehousing environments, students were immersed in real-world scenarios in which they worked on teams to address prescribed problems encountered during the activities. The highly structured, Plan-Do-Check-Act approach commonly used in industry was adapted for the DHH student participants to document and communicate the problem-solving steps. Students who experienced the intervention realized a 14.6% improvement in problem-solving proficiency compared with a control group, and this gain was retained at 6 and 12 months, post-intervention. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The Students-Recruiting-Students Undergraduate Engineering Recruiting Programme.

ERIC Educational Resources Information Center

Gattis, Carol; Nachtmann, Heather; Youngblood, Alisha D.

2003-01-01

Describes the Students-Recruiting-Students (SRS) program developed to recruit high school students into the Industrial Engineering Department at the University of Arkansas. Presents four phases of the program along with seven years of program results. Encourages successful development of similar recruiting programs. (KHR)

Engineering Education at a New Public University in Brazil: First Students' Contact with Engineering Methods

ERIC Educational Resources Information Center

Romero, Jesus Franklin A.; Leite, Patricia; Mantovani, Gerson L.; Lanfredi, Alexandre J. C.; Martins-Filho, Luiz S.

2011-01-01

This paper describes the experience of an introductory discipline to the engineering curricula at the Brazilian Federal University of ABC (UFABC). The university offers a common basic curriculum that must be accomplished by every student and can be followed by professionalising courses. The discipline "Introduction to Engineering"…

Anxiety among Engineering Students in a Graduate EFL Classroom

ERIC Educational Resources Information Center

Samoilova, Valeriia; Thanh, Vo Duy; Wilang, Jeffrey Dawala

2017-01-01

This article reports the descriptive results of foreign language anxiety experiences of engineering students in a top-ranked research university in Thailand. Although numerous studies have been conducted in the past years about English language anxiety, few studies have reported anxiety situations specific to Thai engineering graduate students in…

Engaging Undergraduates in an Interdisciplinary Program: Developing a Biomaterial Technology Program

ERIC Educational Resources Information Center

Liang, Jia-chi; Kung, Shieh-shiuh; Sun, Yi-ming

2009-01-01

Yuan Ze University targeted Biomaterials Science and developed a curriculum related to Biotechnology, Biochemical Engineering, and Biomaterials for engineering students to cultivate talents for both engineering and biotechnology. After several years of operation, recruiting students has succeeded, and students are satisfied with the course design…

Regaining America's leading global position in the innovation of science and technology: Increasing engineering program enrollment in higher education

NASA Astrophysics Data System (ADS)

Burklo, Daniel A.

While the United States has always been a global leader in the innovation of science and technology, this leading global position is in jeopardy. As other developing countries produce intellectual capital in the form of engineers at increasing rates, the country will continue to lose ground. Today the need for the country to produce engineers is greater than ever before. Recognizing this need, attempts have been made to increase entrance into engineering fields in higher education by providing STEM (science, technology, engineering, and mathematics) activities during K-12 education. While STEM initiatives create awareness and interest, this study investigates what actually motivates individuals to choose engineering programs in higher education. A quantitative study utilizing survey results from 202 first year engineering students in the state of Ohio illustrates what has motivated them to choose engineering as a major. The study examines who, when, and what motivated the students to choose engineering by examining the relationship of influential people and STEM initiatives participated in during their K-12 education to enrollment in engineering programs at colleges and universities in the state of Ohio. The study proved the general hypothesis that there are influential people in an individual's college choice, such as the parent, and there are time periods during K-12 education when individuals are more motivated, such as the high school years. The study also showed a positive correlation between the motivation toward engineering programs and the number of STEM opportunities in which individuals participated yet there was little difference when comparing the different types of STEM initiatives.

Mathematical learning instruction and teacher motivation factors affecting science technology engineering and math (STEM) major choices in 4-year colleges and universities: Multilevel structural equation modeling

NASA Astrophysics Data System (ADS)

Lee, Ahlam

2011-12-01

Using the Educational Longitudinal Study of 2002/06, this study examined the effects of the selected mathematical learning and teacher motivation factors on graduates' science, technology, engineering, and math (STEM) related major choices in 4-year colleges and universities, as mediated by math performance and math self-efficacy. Using multilevel structural equation modeling, I analyzed: (1) the association between mathematical learning instruction factors (i.e., computer, individual, and lecture-based learning activities in mathematics) and students' STEM major choices in 4-year colleges and universities as mediated by math performance and math self-efficacy and (2) the association between school factor, teacher motivation and students' STEM major choices in 4-year colleges and universities via mediators of math performance and math self-efficacy. The results revealed that among the selected learning experience factors, computer-based learning activities in math classrooms yielded the most positive effects on math self-efficacy, which significantly predicted the increase in the proportion of students' STEM major choice as mediated by math self-efficacy. Further, when controlling for base-year math Item Response Theory (IRT) scores, a positive relationship between individual-based learning activities in math classrooms and the first follow-up math IRT scores emerged, which related to the high proportion of students' STEM major choices. The results also indicated that individual and lecture-based learning activities in math yielded positive effects on math self-efficacy, which related to STEM major choice. Concerning between-school levels, teacher motivation yielded positive effects on the first follow up math IRT score, when controlling for base year IRT score. The results from this study inform educators, parents, and policy makers on how mathematics instruction can improve student math performance and encourage more students to prepare for STEM careers. Students should receive all possible opportunities to use computers to enhance their math self-efficacy, be encouraged to review math materials, and concentrate on listening to math teachers' lectures. While all selected math-learning activities should be embraced in math instruction, computer and individual-based learning activities, which reflect student-driven learning, should be emphasized in the high school instruction. Likewise, students should be encouraged to frequently engage in individual-based learning activities to improve their math performance.

PRiME: integrating professional responsibility into the engineering curriculum.

PubMed

Moore, Christy; Hart, Hillary; Randall, D'Arcy; Nichols, Steven P

2006-04-01

Engineering educators have long discussed the need to teach professional responsibility and the social context of engineering without adding to overcrowded curricula. One difficulty we face is the lack of appropriate teaching materials that can fit into existing courses. The PRiME (Professional Responsibility Modules for Engineering) Project (http://www.engr.utexas.edu/ethics/primeModules.cfm) described in this paper was initiated at the University of Texas, Austin to provide web-based modules that could be integrated into any undergraduate engineering class. Using HPL (How People Learn) theory, PRiME developed and piloted four modules during the academic year 2004-2005. This article introduces the modules and the pilot, outlines the assessment process, analyzes the results, and describes how the modules are being revised in light of the initial assessment. In its first year of development and testing, PRiME made significant progress towards meeting its objectives. The PRiME Project can strengthen engineering education by providing faculty with an effective system for engaging students in learning about professional responsibility.

Women in science & engineering and minority engineering scholarships : year 2 report for 2007-2008 activities.

DOT National Transportation Integrated Search

2008-08-01

Support will make scholarships available to minority and women students interested in engineering and science and will increase : significantly the number of minority and female students that Missouri S&T can recruit to its science and engineering pr...

Women in science & engineering and minority engineering scholarships : year 3, report for 2008-2009 activities.

DOT National Transportation Integrated Search

2009-05-01

Support made scholarships available to minority and women students interested in engineering and science and significantly increased : the number of minority and female students that Missouri S&T can recruit to its science and engineering programs. R...

Situating Second-Year Success: Understanding Second-Year STEM Experiences at a Liberal Arts College

PubMed Central

Gregg-Jolly, Leslie; Swartz, Jim; Iverson, Ellen; Stern, Joyce; Brown, Narren; Lopatto, David

2016-01-01

Challenges particular to second-year students have been identified that can impact persistence in science, technology, engineering, and mathematics (STEM) fields. We implemented a program to improve student success in intermediate-level science courses by helping students to feel they belonged and could succeed in STEM. We used survey measures of perceptions and attitudes and then qualitative measures to characterize the impact of support strategies, including peer mentoring, a second-year science student retreat, learning and advising support resources, and department-specific activities. Analysis of registration and transcript information revealed underperformance by students of color (SOC) and first-generation (FG) students in 200-level science courses. Comparison of these data before and during programming revealed significant improvement in success rates of these students in 200-level biology and chemistry courses, but success rates of SOC and FG students remain lower than the overall rate for 200-level science courses. Contemporaneous with the program, qualitative and quantitative measures of student attitudes revealed a high level of belongingness and support. The results suggest that a focus on students’ metacognition about their own abilities and strategic knowledge of how to succeed may be a fruitful direction for future research. PMID:27587855

Minority Undergraduate Training for Energy-Related Careers (MUTEC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, C.; Yih, T.C.; Ebadian, M.A.

1995-12-01

OAK-B135 Minority Undergraduate Training for Energy-Related Careers (MUTEC). First, all the co-investigators would like to thank the Department of Energy's Minority Impact Office for awarding FIU with the MUTEC grant for the past five years. We believe it has made a difference, especially in the creation of a new, streamlined curriculum that began with the Mechanical Engineering Program and has now become college wide. Second, we have given 774 students an introduction to engineering, something that did not exist 3 years ago. Third, we have given FLAME the opportunity to participate in this program through the equivalent introduction to engineeringmore » course. Over 150 of those students have participated and have a 100% record of completing the program once, they start. Over 80% of those students have gone on to college. Fourth, we have aided 32 undergraduates continue in their engineering studies. Of those half have already graduated, and half of those have gone on to graduate school. One of these graduate school students has graduated with an MSME and another has won an NSF Scholarship. Fifth, we have created a bank of 51 2-hour tapes in 10 science and engineering science areas and covered the spectrum of math courses from geometry/trigonometry to differential equations. Sixth, we have created two examinations for use in preparation for entry into the engineering programs and in preparation for the EIT. Seventh, we have created a streamlined curriculum and four options, two of which are energy related. From these points, we believe that the program was very successful and for that we wish to thank the Department of Energy and specifically Ms. Estela Romo for her unwavering support.« less

Having students create short video clips to help transition from naïve conceptions about mechanics to true Newtonian physics

NASA Astrophysics Data System (ADS)

Corten-Gualtieri, Pascale; Ritter, Christian; Plumat, Jim; Keunings, Roland; Lebrun, Marcel; Raucent, Benoit

2016-07-01

Most students enter their first university physics course with a system of beliefs and intuitions which are often inconsistent with the Newtonian frame of reference. This article presents an experiment of collaborative learning aiming at helping first-year students in an engineering programme to transition from their naïve intuition about dynamics to the Newtonian way of thinking. In a first activity, students were asked to critically analyse the contents of two video clips from the point of view of Newtonian mechanics. In a second activity, students had to design and realise their own video clip to illustrate a given aspect of Newtonian mechanics. The preparation of the scenario for the second activity required looking up and assimilating scientific knowledge. The efficiency of the activity was assessed on an enhanced version of the statistical analysis method proposed by Hestenes and Halloun, which relies on a pre-test and a post-test to measure individual learning.

A Broadly Implementable Research Course in Phage Discovery and Genomics for First-Year Undergraduate Students

PubMed Central

Jordan, Tuajuanda C.; Burnett, Sandra H.; Carson, Susan; Caruso, Steven M.; Clase, Kari; DeJong, Randall J.; Dennehy, John J.; Denver, Dee R.; Dunbar, David; Elgin, Sarah C. R.; Findley, Ann M.; Gissendanner, Chris R.; Golebiewska, Urszula P.; Guild, Nancy; Hartzog, Grant A.; Grillo, Wendy H.; Hollowell, Gail P.; Hughes, Lee E.; Johnson, Allison; King, Rodney A.; Lewis, Lynn O.; Li, Wei; Rosenzweig, Frank; Rubin, Michael R.; Saha, Margaret S.; Sandoz, James; Shaffer, Christopher D.; Taylor, Barbara; Temple, Louise; Vazquez, Edwin; Ware, Vassie C.; Barker, Lucia P.; Bradley, Kevin W.; Jacobs-Sera, Deborah; Pope, Welkin H.; Russell, Daniel A.; Cresawn, Steven G.; Lopatto, David; Bailey, Cheryl P.; Hatfull, Graham F.

2014-01-01

ABSTRACT Engaging large numbers of undergraduates in authentic scientific discovery is desirable but difficult to achieve. We have developed a general model in which faculty and teaching assistants from diverse academic institutions are trained to teach a research course for first-year undergraduate students focused on bacteriophage discovery and genomics. The course is situated within a broader scientific context aimed at understanding viral diversity, such that faculty and students are collaborators with established researchers in the field. The Howard Hughes Medical Institute (HHMI) Science Education Alliance Phage Hunters Advancing Genomics and Evolutionary Science (SEA-PHAGES) course has been widely implemented and has been taken by over 4,800 students at 73 institutions. We show here that this alliance-sourced model not only substantially advances the field of phage genomics but also stimulates students’ interest in science, positively influences academic achievement, and enhances persistence in science, technology, engineering, and mathematics (STEM) disciplines. Broad application of this model by integrating other research areas with large numbers of early-career undergraduate students has the potential to be transformative in science education and research training. PMID:24496795

A Study of Second-Year Engineering Students' Alternative Conceptions about Electric Potential, Current Intensity and Ohm's Law

ERIC Educational Resources Information Center

Periago, M. Cristina; Bohigas, Xavier

2005-01-01

The aim of this research was to evaluate and analyse second-year industrial engineering and chemical engineering students prior knowledge of conceptual aspects of "circuit theory". Specifically, we focused on the basic concepts of electric potential and current intensity and on the fundamental relationship between them as expressed by Ohm's law.…

Engineering education at a new public university in Brazil: first students' contact with engineering methods

NASA Astrophysics Data System (ADS)

Romero, Jesus Franklin A.; Leite, Patrícia; Mantovani, Gerson L.; Lanfredi, Alexandre J. C.; Martins-Filho, Luiz S.

2011-06-01

This paper describes the experience of an introductory discipline to the engineering curricula at the Brazilian Federal University of ABC (UFABC). The university offers a common basic curriculum that must be accomplished by every student and can be followed by professionalising courses. The discipline 'Introduction to Engineering' presents the basis of the engineering career, methods and thinking together with professional commitments and regulations. The objective is to help students to consciously choose their careers, minimising the precocity problem in deciding a professional future. The discipline methodology includes activities proposed by the TryEngineering website and from Brazilian engineering councils. Lectures with invited professors introduce UFABC engineering specialities: Aerospace, Bioengineering, Energy, Environmental & Urban, Information, Instrumentation & Automation & Robotics, Management, Materials. This paper reports the proposed activities, results obtained by the students, a methodology critical analysis and the impacts on the following steps of students embracing an engineering career.

Undergraduate engineering students' attitudes and perceptions towards `professional ethics' course: a case study of India

NASA Astrophysics Data System (ADS)

Sethy, Satya Sundar

2017-11-01

'Professional Ethics' has been offered as a compulsory course to undergraduate engineering students in a premier engineering institution of India. It was noticed that students' perceptions and attitudes were frivolous and ornamental towards this course. Course instructors and institution authorities were motivated to find out the factors contributing to this awkwardness. For this purpose, a questionnaire was prepared and administrated to 336 students registered for the July-November 2014 semester. The study found two factors contributing to students' indifference towards the Professional Ethics course. First, most of the students did not have self-interest to join the engineering programme, and while pursuing their study, they decided to switch to a different field upon completion of their engineering study. Second, students who desired to be engineers in their future believed that engineering code of ethics is not really referred to in most of the engineering jobs, and therefore Professional Ethics course is only meant for classroom discussions.

Integration of NASA Research into Undergraduate Education in Math, Science, Engineering and Technology at North Carolina A&T State University

NASA Technical Reports Server (NTRS)

Monroe, Joseph; Kelkar, Ajit

2003-01-01

The NASA PAIR program incorporated the NASA-Sponsored research into the undergraduate environment at North Carolina Agricultural and Technical State University. This program is designed to significantly improve undergraduate education in the areas of mathematics, science, engineering, and technology (MSET) by directly benefiting from the experiences of NASA field centers, affiliated industrial partners and academic institutions. The three basic goals of the program were enhancing core courses in MSET curriculum, upgrading core-engineering laboratories to compliment upgraded MSET curriculum, and conduct research training for undergraduates in MSET disciplines through a sophomore shadow program and through Research Experience for Undergraduates (REU) programs. Since the inception of the program nine courses have been modified to include NASA related topics and research. These courses have impacted over 900 students in the first three years of the program. The Electrical Engineering circuit's lab is completely re-equipped to include Computer controlled and data acquisition equipment. The Physics lab is upgraded to implement better sensory data acquisition to enhance students understanding of course concepts. In addition a new instrumentation laboratory in the department of Mechanical Engineering is developed. Research training for A&T students was conducted through four different programs: Apprentice program, Developers program, Sophomore Shadow program and Independent Research program. These programs provided opportunities for an average of forty students per semester.

Cognitive diversity in undergraduate engineering: Dyslexia

NASA Astrophysics Data System (ADS)

Fitzpatrick, Velvet R.

In the United States, institutions have established multiple programs and initiatives aimed at increasing the diversity of both faculty and students in engineering as means to produce a workforce that will better serve society. However, there are two major problems in addressing engineering student diversity. First, the engineering education research community has paid little attention to date as to how engineering education research characterizes diversity in its broadest sense. Second, research on persons with disabilities in undergraduates engineering, a population of interests within diversity, is minimal. Available disability studies tend to be skewed toward physical disabilities, leading to a neglect of cognitive differences such as learning disabilities (LD). In addition, disability research questions and study designs are inherently steeped in ability bias. The purpose of this dissertation is to explore the meaning of ability for students with dyslexia while in undergraduate engineering and establish the significance of cognitive diversity, focusing on LD and more specifically dyslexia, in undergraduate engineering education and answer the following research question: How do undergraduate engineering students with dyslexia experience ability while pursuing and persisting in engineering? The motivation was to lay the groundwork for future engineering education studies on undergraduate students with LD in general but dyslexia in specific. The first goal was to conduct a critical literature review pertaining to the academic strengths of undergraduate students with LD, specifically, dyslexia and the second goal was to describe how undergraduate engineering students with dyslexia experience ability. The intent was not to redefine dyslexia or disability. The intent is to provide an inclusive account of dyslexia, weakness and strengths, within the field of engineering education. This study was conducted from a qualitative inquiry approach, within the social constructivism paradigm, and utilized purposive sampling to identify appropriate participants. The thematic analysis methodological framework was used to portray a rich, complex description of experiences in which undergraduate engineering students with dyslexia constructed meaning around ability while pursuing and persisting in engineering. Eight students participated and semi-structured interviews were the data source. The findings are presented in three parts. First, significant findings that were also salient amongst the general undergraduate engineering student populations are presented. This is done to make a clear demarcation from those significant findings found to be unique to undergraduate engineering students with dyslexia presented in the themes: relationships, early exposure to engineering, and securing an internship or co-op position. Second, the four themes that developed from the analysis will were discussed: alignment, dissociation, ideal education environments, and time. Third, additional findings for further investigation were proposed: the role of remediation practices, the representation of dyslexia in media, gender differences in extracurricular activities that constructed different meanings of ability, the prevalence of co-occurring LD amongst the participants, and the visualization of science, engineering, mathematics concepts. The study is closed with a discussion; findings are discussed with respect to relevant research in the conclusion.

The Impact of Structured Writing and Developing Awareness of Learning Preferences on the Performance and Attitudes of Engineering Teams

ERIC Educational Resources Information Center

Dahm, Kevin; Newell, James; Newell, Heidi; Harvey, Roberta

2009-01-01

This paper discusses efforts to develop metacognition in teams of engineering students by: first, exploring personal learning patterns, and second, ongoing biweekly journaling exercises. Thirty-three junior and senior engineering students (30 chemical engineer, one each from mechanical, civil and electrical) working on semester-long projects in…

Factors that Influence First-Career Choice of Undergraduate Engineers in Software Services Companies: A South Indian Experience

ERIC Educational Resources Information Center

Gokuladas, V. K.

2010-01-01

Purpose: The purpose of this paper is to identify how undergraduate engineering students differ in their perception about software services companies in India based on variables like gender, locations of the college and branches of engineering. Design/methodology/approach: Data obtained from 560 undergraduate engineering students who had the…

Six University Canada/US/Mexico exchange program in Earth Hazards (EHaz)

NASA Astrophysics Data System (ADS)

Stix, J.; Rose, W. I.

2005-12-01

This program is a consortium of six research-based universities in Canada, Mexico, and the U.S (Michigan Tech, Buffalo, McGill, Waterloo, UNAM and Colima) funded by the Department of education in the US and equivalent organizations in Canada and Mexico as part of the NAFTA agreement. The focus area for the mobility program is mitigation of geological natural hazards in North America. The consortium universities will exchange students and faculty in several engineering and science disciplines (e.g. environmental engineering, civil engineering, geological engineering, social sciences and geology) involved in the study of natural geological hazards. Students in the social sciences also will be exchanged, recognizing that the solution of natural hazards problems involves critical political, social, and economic aspects. Students will be mobilized among the participating universities through one- to two-semester visits and up to 60 more students will be mobilized via short-term, intensive courses. Student activities will consist of three stages: intensive language training, natural hazards coursework, and professional or research internships with local industries, agencies or at the host university. In each of the next three years there will be a joint advanced volcanology class run via videoconferencing and a three week field trip to areas of volcanological interest in Canada, US and Mexico. The course and field trip foci for the next three years are: 2006: Megaeruptions/ LongValley and Yellowstone; 2007: Volcanic edifice failure/ Cascades and Western Canada 2008: Convergent plate Boundary Volcanism/ Mexican Volcanic Belt Although the six universities will have first access to the exchange we are constructing ways for other volcanology programs to share the teleconference courses and field trips.

Engineering Students' Conceptions of Entrepreneurial Learning as Part of Their Education

ERIC Educational Resources Information Center

Täks, Marge; Tynjälä, Päivi; Kukemelk, Hasso

2016-01-01

The purpose of this study was to examine what kinds of conceptions of entrepreneurial learning engineering students expressed in an entrepreneurship course integrated in their study programme. The data were collected during an entrepreneurship course in Estonia that was organised for fourth-year engineering students, using video-recorded group…

Table-Top Robotics for Engineering Design

ERIC Educational Resources Information Center

Wilczynski, Vincent; Dixon, Gregg; Ford, Eric

2005-01-01

The Mechanical Engineering Section at the U.S. Coast Guard Academy has developed a comprehensive activity based course to introduce second year students to mechanical engineering design. The culminating design activity for the course requires students to design, construct and test robotic devices that complete engineering challenges. Teams of…

Portsmouth Atmospheric Science School (PASS) Project

NASA Technical Reports Server (NTRS)

Coleman, Clarence D.; Hathaway, Roger (Technical Monitor)

2002-01-01

The Portsmouth Atmospheric Science School Project (PASS) Project was granted a one-year no cost extension for 2001-2002. In year three of the project, objectives and strategies were modified based on the previous year-end evaluation. The recommendations were incorporated and the program was replicated within most of the remaining elementary schools in Portsmouth, Virginia and continued in the four middle schools. The Portsmouth Atmospheric Science School Project is a partnership, which includes Norfolk State University, Cooperating Hampton Roads Organizations for Minorities in Engineering (CHROME), NASA Langley Research Center, and the City of Portsmouth, Virginia Public Schools. The project seeks to strengthen the knowledge of Portsmouth Public Schools students in the field of atmospheric sciences and enhance teacher awareness of hands on activities in the atmospheric sciences. The project specifically seeks to: 1) increase the interest and participation of elementary and middle school students in science and mathematics; 2) strengthen existing science programs; and 3) facilitate greater achievement in core subjects, which are necessary for math, science, and technical careers. Emphasis was placed on providing training activities, materials and resources for elementary students (grades 3 - 5) and middle school students (grades 6 - 8), and teachers through a CHROME club structure. The first year of the project focused on introducing elementary students to concepts and activities in atmospheric science. Year two of the project built on the first year's activities and utilizes advanced topics and activities appropriate for middle school students. During the third year of the project, in addition to the approaches used in years one and two, emphasis was placed on activities that enhanced the Virginia Standards of Learning (SOL).

Making developmental biology relevant to undergraduates in an era of economic rationalism in Australia.

PubMed

Key, Brian; Nurcombe, Victor

2003-01-01

This report describes the road map we followed at our university to accommodate three main factors: financial pressure within the university system; desire to enhance the learning experience of undergraduates; and motivation to increase the prominence of the discipline of developmental biology in our university. We engineered a novel, multi-year undergraduate developmental biology program which was "student-oriented," ensuring that students were continually exposed to the underlying principles and philosophy of this discipline throughout their undergraduate career. Among its key features are introductory lectures in core courses in the first year, which emphasize the relevance of developmental biology to tissue engineering, reproductive medicine, therapeutic approaches in medicine, agriculture and aquaculture. State-of-the-art animated computer graphics and images of high visual impact are also used. In addition, students are streamed into the developmental biology track in the second year, using courses like human embryology and courses shared with cell biology, which include practicals based on modern experimental approaches. Finally, fully dedicated third-year courses in developmental biology are undertaken in conjunction with stand-alone practical courses where students experiencefirst-hand work in a research laboratory. Our philosophy is a "cradle-to-grave" approach to the education of undergraduates so as to prepare highly motivated, enthusiastic and well-educated developmental biologists for entry into graduate programs and ultimately post-doctoral research.

Pathways to space: A mission to foster the next generation of scientists and engineers

NASA Astrophysics Data System (ADS)

Dougherty, Kerrie; Oliver, Carol; Fergusson, Jennifer

2014-06-01

The first education project funded under the Australian Government's Australian Space Research Program (ASRP), Pathways to Space was a unique project combining education, science communication research and research in astrobiology and robotics. It drew upon the challenges of space exploration to inspire students to consider study and careers in science and engineering. A multi-faceted program, Pathways to Space provided hands-on opportunities for high school and university students to participate in realistic simulations of a robotic Mars exploration mission for astrobiology. Its development was a collaboration between the Australian Centre for Astrobiology (University of New South Wales), the Australian Centre for Field Robotics (University of Sydney), the Powerhouse Museum and industry partner, Cisco. Focused on students in Years 9-10 (15-16 years of age), this program provided them with the opportunity to engage directly with space engineers and astrobiologists, while carrying out a simulated Mars mission using the digital learning facilities available at the Powerhouse Museum. As a part of their program, the students operated robotic mini-rovers in the Powerhouse Museum's “Mars Yard”, a highly accurate simulation of the Martian surface, where university students also carry out the development and testing of experimental Mars roving vehicles. This aspect of the program has brought real science and engineering research into the public space of the museum. As they undertook the education program, the students participated in a research study aimed at understanding the effectiveness of the project in achieving its key objective - encouraging students to consider space related courses and careers. This paper outlines the development and operation of the Pathways to Space project over its 3-year funding period, during which it met and exceeded all the requirements of its ASRP grant. It will look at the goals of the project, the rationale behind the education and science communications research, the challenges of developing such a multi-faceted education project in collaboration with several partners and the results that have already been achieved within the study.

Evolution of Student Knowledge in a Traditional Introductory Classroom

NASA Astrophysics Data System (ADS)

Sayre, Eleanor C.; Heckler, Andrew F.

2008-10-01

In the physics education research community, a common format for evaluation is pre- and post-tests. In this study, we collect student test data many times throughout a course, allowing for the measurement of the changes of student knowledge with a time resolution on the order of a few days. The data cover the first two quarters (mechanics, E&M) of a calculus-based introductory sequence populated primarily by first- and second-year engineering majors. To avoid the possibility of test-retest effects, separate and quasi-random subpopulations of students are evaluated every week of the quarter on a variety of tasks. Unsurprisingly for a traditional introductory course, there is little change on many conceptual questions. However, the data suggest that some student ideas peak and decay rapidly during a quarter, a pattern consistent with memory research yet unmeasurable by pre-/post-testing.

Proceedings of the 6th Annual Summer Conference: NASA/USRA University Advanced Design Program

NASA Technical Reports Server (NTRS)

1990-01-01

The NASA/USRA University Advanced Design Program is a unique program that brings together NASA engineers, students, and faculty from United States engineering schools by integrating current and future NASA space/aeronautics engineering design projects into the university curriculum. The Program was conceived in the fall of 1984 as a pilot project to foster engineering design education in the universities and to supplement NASA's in-house efforts in advanced planning for space and aeronautics design. Nine universities and five NASA centers participated in the first year of the pilot project. The study topics cover a broad range of potential space and aeronautics projects that could be undertaken during a 20 to 30 year period beginning with the deployment of the Space Station Freedom scheduled for the mid-1990s. Both manned and unmanned endeavors are embraced, and the systems approach to the design problem is emphasized.

Research approach to teaching groundwater biodegradation in karst aquifers

USGS Publications Warehouse

King, L.; Byl, T.; Painter, R.

2006-01-01

TSU in partnership with the USGS has conducted extensive research regarding biode??gradation of contaminants in karst aquifers. This research resulted in the development of a numerical approach to modeling biodegradation of contaminants in karst aquifers that is taught to environmental engineering students in several steps. First, environmental engineering students are taught chemical-reaction engineering principles relating to a wide variety of environmental fate and transport issues. Second, as part of TSU's engineering course curriculum, students use a non-ideal flow laboratory reactor system and run a tracer study to establish residence time distribution (RTD). Next, the students couple that formula to a first-order biodegradation rate and predict the removal of a biodegradable contaminant as a function of residence time. Following this, students are shown data collected from karst bedrock wells that suggest that karst aquifers are analogous to non-ideal flow reactors. The students are challenged to develop rates of biodegradation through lab studies and use their results to predict biodegradaton at an actual contaminated karst site. Field studies are also conducted to determine the accuracy of the students' predictions. This academic approach teaches biodegradation processes, rate-kinetic processes, hydraulic processes and numerical principles. The students are able to experience how chemical engineering principles can be applied to other situations, such as, modeling biodegradation of contaminants in karst aquifers. This paper provides background on the chemical engineering principles and karst issues used in the research-enhanced curriculum. ?? American Society for Engineering Education, 2006.

On flipping first-semester calculus: a case study

NASA Astrophysics Data System (ADS)

Petrillo, Joseph

2016-05-01

High failure rates in calculus have plagued students, teachers, and administrators for decades, while science, technology, engineering, and mathematics programmes continue to suffer from low enrollments and high attrition. In an effort to affect this reality, some educators are 'flipping' (or inverting) their classrooms. By flipping, we mean administering course content outside of the classroom and replacing the traditional in-class lectures with discussion, practice, group work, and other elements of active learning. This paper presents the major results from a three-year study of a flipped, first-semester calculus course at a small, comprehensive, American university with a well-known engineering programme. The data we have collected help quantify the positive and substantial effects of our flipped calculus course on failure rates, scores on the common final exam, student opinion of calculus, teacher impact on measurable outcomes, and success in second-semester calculus. While flipping may not be suitable for every teacher, every student, and in every situation, this report provides some evidence that it may be a viable option for those seeking an alternative to the traditional lecture model.

A broadly implementable research course in phage discovery and genomics for first-year undergraduate students.

PubMed

Jordan, Tuajuanda C; Burnett, Sandra H; Carson, Susan; Caruso, Steven M; Clase, Kari; DeJong, Randall J; Dennehy, John J; Denver, Dee R; Dunbar, David; Elgin, Sarah C R; Findley, Ann M; Gissendanner, Chris R; Golebiewska, Urszula P; Guild, Nancy; Hartzog, Grant A; Grillo, Wendy H; Hollowell, Gail P; Hughes, Lee E; Johnson, Allison; King, Rodney A; Lewis, Lynn O; Li, Wei; Rosenzweig, Frank; Rubin, Michael R; Saha, Margaret S; Sandoz, James; Shaffer, Christopher D; Taylor, Barbara; Temple, Louise; Vazquez, Edwin; Ware, Vassie C; Barker, Lucia P; Bradley, Kevin W; Jacobs-Sera, Deborah; Pope, Welkin H; Russell, Daniel A; Cresawn, Steven G; Lopatto, David; Bailey, Cheryl P; Hatfull, Graham F

2014-02-04

Engaging large numbers of undergraduates in authentic scientific discovery is desirable but difficult to achieve. We have developed a general model in which faculty and teaching assistants from diverse academic institutions are trained to teach a research course for first-year undergraduate students focused on bacteriophage discovery and genomics. The course is situated within a broader scientific context aimed at understanding viral diversity, such that faculty and students are collaborators with established researchers in the field. The Howard Hughes Medical Institute (HHMI) Science Education Alliance Phage Hunters Advancing Genomics and Evolutionary Science (SEA-PHAGES) course has been widely implemented and has been taken by over 4,800 students at 73 institutions. We show here that this alliance-sourced model not only substantially advances the field of phage genomics but also stimulates students' interest in science, positively influences academic achievement, and enhances persistence in science, technology, engineering, and mathematics (STEM) disciplines. Broad application of this model by integrating other research areas with large numbers of early-career undergraduate students has the potential to be transformative in science education and research training. Engagement of undergraduate students in scientific research at early stages in their careers presents an opportunity to excite students about science, technology, engineering, and mathematics (STEM) disciplines and promote continued interests in these areas. Many excellent course-based undergraduate research experiences have been developed, but scaling these to a broader impact with larger numbers of students is challenging. The Howard Hughes Medical Institute (HHMI) Science Education Alliance Phage Hunting Advancing Genomics and Evolutionary Science (SEA-PHAGES) program takes advantage of the huge size and diversity of the bacteriophage population to engage students in discovery of new viruses, genome annotation, and comparative genomics, with strong impacts on bacteriophage research, increased persistence in STEM fields, and student self-identification with learning gains, motivation, attitude, and career aspirations.

Using Familiar Contexts to Ease the Transition between A-Level and First-Year Degree-Level Chemistry

ERIC Educational Resources Information Center

Turner, John J.

2013-01-01

This article endeavours to define how an understanding of the context of chemical principles and processes investigated at A-level (post-16) and earlier can be continued and contribute to easing the tensions and uncertainties encountered by chemistry and chemical engineering students on entry to university. The importance of using chemistry…

Active Problem Solving and Applied Research Methods in a Graduate Course on Numerical Methods

ERIC Educational Resources Information Center

Maase, Eric L.; High, Karen A.

2008-01-01

"Chemical Engineering Modeling" is a first-semester graduate course traditionally taught in a lecture format at Oklahoma State University. The course as taught by the author for the past seven years focuses on numerical and mathematical methods as necessary skills for incoming graduate students. Recent changes to the course have included Visual…

Identities and Transformational Experiences for Quantitative Problem Solving: Gender Comparisons of First-Year University Science Students

ERIC Educational Resources Information Center

Hudson, Peter; Matthews, Kelly

2012-01-01

Women are underrepresented in science, technology, engineering and mathematics (STEM) areas in university settings; however this may be the result of attitude rather than aptitude. There is widespread agreement that quantitative problem-solving is essential for graduate competence and preparedness in science and other STEM subjects. The research…

Follow-up and Feedback Processes in the EHEA

ERIC Educational Resources Information Center

del Canto, Pablo; Gallego, Isabel; López, José Manuel; Medina, Esunly; Mochón, Francisco; Mora, Javier; Reyes, Angélica; Rodríguez, Eva; Salami, Esther; Santamaría, Eduard; Valero, Miguel

2011-01-01

In the present paper, we describe the work being carried out by a group of professors so as to implement the follow-up and feedback processes of the activities students do throughout the first academic years in their Engineering studies. Not to mention, this project is within the EHEA (European Higher Education Area) framework. Our results show…

Introduction of a Population Balance Based Design Problem in a Particle Science and Technology Course for Chemical Engineers

ERIC Educational Resources Information Center

Ehrman, Sheryl H.; Castellanos, Patricia; Dwivedi, Vivek; Diemer, R. Bertrum

2007-01-01

A particle technology design problem incorporating population balance modeling was developed and assigned to senior and first-year graduate students in a Particle Science and Technology course. The problem focused on particle collection, with a pipeline agglomerator, Cyclone, and baghouse comprising the collection system. The problem was developed…

Using the Continuum of Design Modelling Techniques to Aid the Development of CAD Modeling Skills in First Year Industrial Design Students

ERIC Educational Resources Information Center

Storer, I. J.; Campbell, R. I.

2012-01-01

Industrial Designers need to understand and command a number of modelling techniques to communicate their ideas to themselves and others. Verbal explanations, sketches, engineering drawings, computer aided design (CAD) models and physical prototypes are the most commonly used communication techniques. Within design, unlike some disciplines,…

Developmental Theory-Driven Evaluation: Strategies for Course Development and Improvement

ERIC Educational Resources Information Center

Potter, C. S.; van der Merwe, E. J.; Kaufman, W.; Delacour, J.

2008-01-01

This article focuses on the longitudinal evaluative strategies used in the development of a new teaching approach for a university course with high failure rates. The subject is compulsory for all first year engineering students at our university. The evaluation has been conducted as part of a process of developmental action research, and has…

Stochastic processes, estimation theory and image enhancement

NASA Technical Reports Server (NTRS)

Assefi, T.

1978-01-01

An introductory account of stochastic processes, estimation theory, and image enhancement is presented. The book is primarily intended for first-year graduate students and practicing engineers and scientists whose work requires an acquaintance with the theory. Fundamental concepts of probability were reviewed that are required to support the main topics. The appendices discuss the remaining mathematical background.

Encouraging the Learning of Hydraulic Engineering Subjects in Agricultural Engineering Schools

ERIC Educational Resources Information Center

Sinobas, Leonor Rodríguez; Sánchez Calvo, Raúl

2014-01-01

Several methodological approaches to improve the understanding and motivation of students in Hydraulic Engineering courses have been adopted in the Agricultural Engineering School at Technical University of Madrid. During three years student's progress and satisfaction have been assessed by continuous monitoring and the use of…

Nurturing Competitive Teamwork with Individual Excellence in an Engineering Classroom

ERIC Educational Resources Information Center

Kanyarusoke, Kant E.

2017-01-01

Team working and business competitiveness awareness are valuable skills for engineering graduates. This paper describes one way to nurture them while motivating individual student excellence in a normal engineering course. In six years, four groups of students were nurtured through real engineering business situations in a model similar to…

Investigating Engineering Practice Is Valuable for Mathematics Learning

ERIC Educational Resources Information Center

Goold, Eileen

2015-01-01

While engineering mathematics curricula often prescribe a fixed body of mathematical knowledge, this study takes a different approach; second-year engineering students are additionally required to investigate and document an aspect of mathematics used in engineering practice. A qualitative approach is used to evaluate the impact that students'…

GeoFORCE Texas: An Outreach Program that is Increasing the Number and Diversity of Students Completing STEM Degrees and Entering the Workforce

NASA Astrophysics Data System (ADS)

Snow, E.; Moore, S. L.

2014-12-01

GeoFORCE Texas is an outreach program of the Jackson School of Geosciences, University of Texas at Austin. Established in 2005 with the goal of increasing the number and diversity of students studying geosciences and engineering and entering the high-tech workforce, GeoFORCE has been highly successful. Key elements to that success will be presented here. GeoFORCE targets bright students in rural and inner-city schools where they are generally not academically challenged. Every summer throughout high school we take them on geologic field trips all over the country. In 2014, GeoFORCE led 15 field academies for about 600 students. The program is rigorous and academic. We emphasize college-level thinking skills. Because it is a 4-year program, they have a pretty good grounding in physical geology by the time they graduate. More importantly, they develop confidence in their ability to handle college, and a strong motivation to earn a college degree. GeoFORCE students are mostly minority (85%) and more than half will be the first in their family to graduate from college. GeoFORCE students exceed national averages in rates of going to college (97%), majoring in STEM fields (66%), majoring in geosciences (15%) and engineering (13%), and graduating from college (~85%). GeoFORCE is a public/private partnership and a workforce-focused program. The Jackson School funds staff and operating expenses (37%). Money for student programs comes from private industry (44%), state and federal grants (14%), and foundations and individual donors (5%). Our corporate partners are in the energy sector. In addition to funding, corporate sponsors attend the summer field programs, mentor GeoFORCE students, and provide opportunities for the students to visit the companies. As our students move toward college graduation, our industry and government partners have begun to hire them as interns. GeoFORCE graduates are now entering the workforce. Our first two cohorts are 4 and 5 years past high school graduation. That group of 155 students boasts 70 college graduates and another 60 still pursuing degrees. There are 19 geoscience majors and 9 engineers. They are also contributing to the body of science with a growing list of publications, including at least one at this meeting.

Present Circumstances and its Effect of Participation in NHK Robocon/RoboCup Competition for Engineering Education in College of Technology

NASA Astrophysics Data System (ADS)

Sugiura, Touko; Ito, Kazuaki; Watanabe, Masato

The engineering education through making robots which needs various techniques such as construction of mechanism and electric circuit design are very useful for training of the students' creativity and developing the students' personality. Toyota National College of Technology has participate in NHK Robocon competition for sixteen years and Robocup competition for four years as a part of engineering education getting spectacular results in those competitions. This paper discusses the present circumstances and its effect of participation in Robocon/RoboCup competition for the engineering education, based on the students' questionnaire survey. It is described to participate in NHK Robocon competition is very important for enhancing the students' knowledge and experience. Furthermore, the participation in Robocup competition brings better results for student' personality development as compared with participation in only Robocon competition.

Reflections of a Faraday Challenge Day Leader

ERIC Educational Resources Information Center

Sewell, Keira

2014-01-01

Keira Sewell has just finished her second year as a Challenge Leader for the Faraday Challenge, a STEM-based scheme run by the Institution of Engineering and Technology. Aimed at 12-13 year-old students, its purpose is to engage students in future careers in engineering. Each year, a new challenge is held in over sixty schools and universities…

Theoretical Overview on the Improvement of Interest in Learning Theoretical Course for Engineering Students

ERIC Educational Resources Information Center

Xiao, Manlin; Zhang, Jianglin

2016-01-01

The phenomenon that engineering students have little interest in theoretical knowledge learning is more and more apparent. Therefore, most students fail to understand and apply theories to solve practical problems. To solve this problem, the importance of improving students' interest in the learning theoretical course is discussed firstly in this…

Academic Support Program in the Faculty of Agricultural and Forestry Engineering of the University of Cordoba (Spain)

NASA Astrophysics Data System (ADS)

Castro, Sergio; Navarro, Rafael M.; Camacho, Emilio; Gallardo, Rosa; García-Ferrer, Alfonso; Pérez-Marín, M. Dolores; Peña, Adolfo; Taguas, Encarnación V.

2014-05-01

The incorporation of new students to undergraduate degrees is performed in different stages through a long, sequential enrollment process. The student integration to the new context of higher education including group work and new teaching methodologies lead to notable adaptation difficulties to this new educational environment. In fact, the highest rate of student failure in the Bachelor degree usually happens during the first courses. The Unit of Quality Evaluation/Monitoring of School of Agricultural and Forest Engineering (ETSIAM) has detected that these failure rates at first and second degree course may be reduced through the involvement of students in a support learning process, by increasing their skills and motivation as well as the contact with the University environment in the context of their future professional horizon. In order to establish a program of this type, it has been launched an Academic Support Program (ASP) at the ETSIAM. This program aims to achieve and reinforce the basic academic and personal skills/competences require by the Bologna's process (BC) and specific competences of the engineers on the area of Agriculture and Forestry in the European context. The ASP includes diferent bloks of seminars, lectures, collaborative work and discussion groups among students, professionals, professors and researchers and it has been designed based on these competences and tranversal contents in both degrees. These activities are planned in a common time for both degrees, out of teaching classes. In addition, a virtual space in Moodle has been created for discussion forums and preparation activities. Additional information about schedules, speakers and companies, presentations and other material are also provided. In the preliminary implementation of the ASP, we will present the results corresponding to the first year of this academic support program. We have conducted a survey among the students in order to have a first feedback about the impact of the ASP on their integration to University. As a general opinion, the students considered that the seminars were useful and interesting. Moreover, they appreciated that activities were open and attendance was not required. Student proposed new topics related with their professional development. This type of activities not only allows improving the satisfaction of the students but also connecting professors of different subjects and areas of knowledge with student and professional sector.

Engineering Students' Experiences of Transition from Study to Work

ERIC Educational Resources Information Center

Stiwne, Elinor Edvardsson; Jungert, Tomas

2010-01-01

The focus in this paper is on how students experience their transition from their education to being employed as engineers in relation to the concept of employability. Four cohorts of students in a master's programme in engineering were monitored annually with a "follow-up" one year after graduation. Results show that there were differences in the…

Advancing Integrated STEM Learning through Engineering Design: Sixth-Grade Students' Design and Construction of Earthquake Resistant Buildings

ERIC Educational Resources Information Center

English, Lyn D.; King, Donna; Smeed, Joanna

2017-01-01

As part of a 3-year longitudinal study, 136 sixth-grade students completed an engineering-based problem on earthquakes involving integrated STEM learning. Students employed engineering design processes and STEM disciplinary knowledge to plan, sketch, then construct a building designed to withstand earthquake damage, taking into account a number of…

Examining Gender Inequality In A High School Engineering Course.

PubMed

Riegle-Crumb, Catherine; Moore, Chelsea

2013-01-01

This paper examines gender inequality within the context of an upper-level high school engineering course recently offered in Texas. Data was collected from six high schools that serve students from a variety of backgrounds. Among the almost two hundred students who enrolled in this challenge-based engineering course, females constituted a clear minority, comprising only a total of 14% of students. Quantitative analyses of surveys administered at the beginning of the school year (Fall 2011) revealed statistically significant gender gaps in personal attitudes towards engineering and perceptions of engineering climate. Specifically, we found that compared to males, females reported lower interest in and intrinsic value for engineering, and expressed less confidence in their engineering skills. Additionally, female students felt that the classroom was less inclusive and viewed engineering occupations as less progressive. Gender disparities on all of these measures did not significantly decrease by the end of the school year (Spring 2012). Findings suggest that efforts to increase the representation of women in the engineering pipeline via increasing exposure in secondary education must contend not only with obstacles to recruiting high school girls into engineering courses, but must also work to remedy gender differences in engineering attitudes within the classroom.

Examining Gender Inequality In A High School Engineering Course

PubMed Central

Moore, Chelsea

2014-01-01

This paper examines gender inequality within the context of an upper-level high school engineering course recently offered in Texas. Data was collected from six high schools that serve students from a variety of backgrounds. Among the almost two hundred students who enrolled in this challenge-based engineering course, females constituted a clear minority, comprising only a total of 14% of students. Quantitative analyses of surveys administered at the beginning of the school year (Fall 2011) revealed statistically significant gender gaps in personal attitudes towards engineering and perceptions of engineering climate. Specifically, we found that compared to males, females reported lower interest in and intrinsic value for engineering, and expressed less confidence in their engineering skills. Additionally, female students felt that the classroom was less inclusive and viewed engineering occupations as less progressive. Gender disparities on all of these measures did not significantly decrease by the end of the school year (Spring 2012). Findings suggest that efforts to increase the representation of women in the engineering pipeline via increasing exposure in secondary education must contend not only with obstacles to recruiting high school girls into engineering courses, but must also work to remedy gender differences in engineering attitudes within the classroom. PMID:25568814

UAF Space Systems Engineering Program: Engaging Students through an Apprenticeship Model

NASA Astrophysics Data System (ADS)

Thorsen, D.

2017-12-01

Learning by doing has been the mantra of engineering education for decades, however, the constraints of semester length courses limits the types and size of experiences that can be offered to students. The Space Systems Engineering Program (SSEP) at the University of Alaska Fairbanks provides interdisciplinary engineering and science students with hands-on experience in all aspects of space systems engineering through a design, build, launch paradigm applied to balloon and rocket payloads and small satellites. The program is structured using an apprenticeship model such that students, freshmen through graduate, can participate in multi-year projects thereby gaining experiences appropriate to their level in college. Students enter the lab in a trainee position and receive training on lab processes and design software. Depending on the student's interests they learn how to use specific lab equipment and software design tools. Trainees provide support engineering under guidance of an upper classman. As the students' progress in their degree program and gain more expertise, they typically become part of a specific subsystem team, where they receive additional training in developing design documents and in writing requirements and test documents, and direct their efforts to meeting specific objectives. By the time the student reaches their senior year, they have acquired the leadership role for a specific subsystem and/or a general leadership role in the lab. If students stay to pursue graduate degrees, they assume the responsibility of training and mentoring other undergraduates in their areas of expertise. Throughout the program upper class students mentor the newer students. The Space Systems Engineering Program strives to reinforce a student's degree program through these large scale projects that place engineering in context.

Opportunities for Scientists to Engage the Public & Inspire Students in Science

NASA Astrophysics Data System (ADS)

Vaughan, R. G.; Worssam, J.; Vaughan, A. F.

2014-12-01

Increasingly, research scientists are learning that communicating science to broad, non-specialist audiences, particularly students, is just as important as communicating science to their peers via peer-reviewed scientific publications. This presentation highlights opportunities that scientists in Flagstaff, AZ have to foster public support of science & inspire students to study STEM disciplines. The goal here is to share ideas, personal experiences, & the rewards, for both students & research professionals, of engaging in science education & public outreach. Flagstaff, AZ, "America's First STEM Community," has a uniquely rich community of organizations engaged in science & engineering research & innovation, including the Flagstaff Arboretum, Coconino Community College, Gore Industries, Lowell Observatory, Museum of Northern Arizona, National Weather Service, National Park Service, National Forest Service, Northern Arizona University, Northern Arizona Center for Entrepreneurship & Technology, US Geological Survey, US Naval Observatory, & Willow Bend Environmental Education Center. These organizations connect with the Northern Arizona community during the yearly Flagstaff Festival of Science - the third oldest science festival in the world - a 10 day long, free, science festival featuring daily public lectures, open houses, interactive science & technology exhibits, field trips, & in-school speaker programs. Many research scientists from these organizations participate in these activities, e.g., public lectures, open houses, & in-school speaker programs, & also volunteer as mentors for science & engineering themed clubs in local schools. An example of a novel, innovative program, developed by a local K-12 science teacher, is the "Scientists-in-the-Classroom" mentor program, which pairs all 7th & 8th grade students with a working research scientist for the entire school year. Led by the student & guided by the mentor, they develop a variety of science / technology projects, which the students then present at year's end. From the perspective of an active research scientist, such outreach activities take little time & effort (~ 0.05 FTE), but pay large dividends in the long run, in inciting public support for science & inspiring the next generation of scientists & engineers.

Teaching Engineering Design Through Paper Rockets

ERIC Educational Resources Information Center

Welling, Jonathan; Wright, Geoffrey A.

2018-01-01

The paper rocket activity described in this article effectively teaches the engineering design process (EDP) by engaging students in a problem-based learning activity that encourages iterative design. For example, the first rockets the students build typically only fly between 30 and 100 feet. As students test and evaluate their rocket designs,…

Improving professionalism in the engineering curriculum through a novel use of oral presentations

NASA Astrophysics Data System (ADS)

Berjano, Enrique; Sales-Nebot, Laura; Lozano-Nieto, Albert

2013-05-01

This hypothesis is based on the fact that oral presentations in the context of engineering education could be used not only to develop oral communication skills but also to augment the professionalism in the curriculum. The methodological innovation is first described, which allows encouraging the capacity of summarising ideas, teamwork, assertiveness, listening skills and constructive criticism. Second, the preliminary results from two pilot groups of students during two academic years are analysed. Finally, the paper reflects on the possibilities of expanding this method to pre-university studies.

First- and Second-Generation Design and Engineering Students: Experience, Attainment and Factors Influencing Them to Attend University

ERIC Educational Resources Information Center

Hunt, Clive; Collins, Bethan; Wardrop, Alex; Hutchings, Maggie; Heaslip, Vanessa; Pritchard, Colin

2018-01-01

Challenges for students who are "first-in-family" to attend university have been discussed within widening participation discourse. However, in the UK, "first-in-family" or first-generation students have frequently been conflated with those experiencing poverty or from lower socio-economic groups. This research integrated…

NASA Microgravity Science Competition for High-school-aged Student Teams

NASA Technical Reports Server (NTRS)

DeLombard, Richard; Stocker, Dennis; Hodanbosi, Carol; Baumann, Eric

2002-01-01

NASA participates in a wide variety of educational activities including competitive events. There are competitive events sponsored by NASA and student teams which are mentored by NASA centers. This participation by NASA in public forums serves to bring the excitement of aerospace science to students and educators. A new competition for highschool-aged student teams involving projects in microgravity has completed two pilot years and will have national eligibility for teams during the 2002-2003 school year. A team participating in the Dropping In a Microgravity Environment will research the field of microgravity, develop a hypothesis, and prepare a proposal for an experiment to be conducted in a microgravity drop tower facility. A team of NASA scientists and engineers will select the top proposals and those teams will then design and build their experiment apparatus. When the experiment apparatus are completed, team representatives will visit NASA Glenn in Cleveland, Ohio for operation of their facility and participate in workshops and center tours. Presented in this paper will be a description of DIME, an overview of the planning and execution of such a program, results from the first two pilot years, and a status of the first national competition.

Teaching Bioprocess Engineering to Undergraduates: Multidisciplinary Hands-On Training in a One-Week Practical Course

ERIC Educational Resources Information Center

Henkel, Marius; Zwick, Michaela; Beuker, Janina; Willenbacher, Judit; Baumann, Sandra; Oswald, Florian; Neumann, Anke; Siemann-Herzberg, Martin; Syldatk, Christoph; Hausmann, Rudolf

2015-01-01

Bioprocess engineering is a highly interdisciplinary field of study which is strongly benefited by practical courses where students can actively experience the interconnection between biology, engineering, and physical sciences. This work describes a lab course developed for 2nd year undergraduate students of bioprocess engineering and related…

Undergraduate Women's Participation in Professional Organizations

NASA Astrophysics Data System (ADS)

Hartman, Moshe; Hartman, Harriet

This article focuses on the differences among female undergraduate engineering students who choose to affiliate with student chapters of discipline-specific, mixed-gender professional organizations, the student chapter of the Society of Women Engineers (SWE), or not to affiliate at all. Participants in the different kinds of organizations are compared to nonparticipants to explore how participation is related to professionalization and the development of engineering social capital. Compared with nonparticipants, participants were more involved in extracurricular enrichment and "help" activities; they were more satisfied with most aspects of the engineering program; they had higher grades; they were more self-confident about themselves as engineers, and by the end of the academic year, about their engineering competencies; and they were more strongly committed to a future in engineering. Participation in SWE was associated with greater involvement in study activities, higher satisfaction with the coursework load, and a different perception of the problems women face in the field. Data were taken from a survey of engineering students at Rowan University during the 2000-2001 academic year, which was funded by the National Science Foundation.

Women in science & engineering scholarships and summer camp outreach programs : year 6.

DOT National Transportation Integrated Search

2012-08-01

Support will make scholarships available to minority and women students interested in engineering and science and will increase : significantly the number of minority and female students that Missouri S&T can recruit to its science and engineering pr...

SENSE IT: Student Enabled Network of Sensors for the Environment using Innovative Technology

NASA Astrophysics Data System (ADS)

Hotaling, L. A.; Stolkin, R.; Kirkey, W.; Bonner, J. S.; Lowes, S.; Lin, P.; Ojo, T.

2010-12-01

SENSE IT is a project funded by the National Science Foundation (NSF) which strives to enrich science, technology, engineering and mathematics (STEM) education by providing teacher professional development and classroom projects in which high school students build from first principles, program, test and deploy sensors for water quality monitoring. Sensor development is a broad and interdisciplinary area, providing motivating scenarios in which to teach a multitude of STEM subjects, from mathematics and physics to biology and environmental science, while engaging students with hands on problems that reinforce conventional classroom learning by re-presenting theory as practical tools for building real-life working devices. The SENSE IT program is currently developing and implementing a set of high school educational modules which teach environmental science and basic engineering through the lens of fundamental STEM principles, at the same time introducing students to a new set of technologies that are increasingly important in the world of environmental research. Specifically, the project provides students with the opportunity to learn the engineering design process through the design, construction, programming and testing of a student-implemented water monitoring network in the Hudson and St. Lawrence Rivers in New York. These educational modules are aligned to state and national technology and science content standards and are designed to be compatible with standard classroom curricula to support a variety of core science, technology and mathematics classroom material. For example, while designing, programming and calibrating the sensors, the students are led through a series of tasks in which they must use core mathematics and physics theory to solve the real problems of making their sensors work. In later modules, students can explore environmental science and environmental engineering curricula while deploying and monitoring their sensors in local rivers. This presentation will provide an overview of the educational modules. A variety of sensors will be described, which are suitably simple for design and construction from first principles by high school students while being accurate enough for students to make meaningful environmental measurements. The presentation will also describe how the sensor building activities can be tied to core curricula classroom theory, enabling the modules to be utilized in regular classes by mathematics, science and computing teachers without disrupting their semester’s teaching goals. Furthermore, the presentation will address of the first two years of the SENSE IT project, during which 39 teachers have been equipped, trained on these materials, and have implemented the modules with around approximately 2,000 high school students.

Scientist in the Classroom: The First Year Highlights of a Plasma Outreach Program

NASA Astrophysics Data System (ADS)

Nagy, A.; Danielson, C. A.; Lee, R. L.; Winter, P. S.; Valentine, J. R.

1999-11-01

The General Atomics education program ``Scientist in the Classroom'' uses scientists, engineers, and technicians to discuss plasma physics with students in the classroom. A program goal is to make science an enjoyable experience while showing students how plasma physics plays an important role in their world. A fusion overview is presented, including topics on energy and environment. Using hands-on equipment, students manipulate plasma discharges using magnetic fields and observe their spectral properties. Students also observe physical properties of liquid nitrogen, infrared waves, and radioactive particles. The benefit of this program, relative to facility tours, is that it optimizes cost and scheduling between the scientific staff and students. This program and its equipment are receiving accolades as an adjunct teaching option available to schools at no cost. This year we have presented to over 1000 students at 11 schools. Student exit interviews reflect strong positive comments regarding their hands-on learning experience and science appreciation.

Student Blogging about Physics

NASA Astrophysics Data System (ADS)

Daniels, Karen E.

2010-09-01

In traditional introductory physics classes, there is often limited opportunity for students to contribute their own ideas, interests, and experiences as they engage with the subject matter. This situation is exacerbated in university lecture-format classes, where students may not feel comfortable speaking during class. In the last few years, Internet blogs have become a decentralized format for diarists, independent journalists, and opinion makers to both post entries and allow commentary from their readers. Below, I will describe some techniques for using student blogging about physics to engage students from two different classroom environments: a calculus-based introductory mechanics class for scientists and engineers, and an honors seminar for first-year students. These assignments required them to make their own connections between classroom knowledge and situations where it might find applications. A second goal of including blogging in the introductory physics course was to induce students to write about the physics content of the class in a more substantive way than was previously part of the class.

Women's Experiences in the Engineering Laboratory in Japan

ERIC Educational Resources Information Center

Hosaka, Masako

2014-01-01

This qualitative study aims to examine Japanese women undergraduate engineering students' experiences of interacting with departmental peers of the same year in the laboratory setting by using interview data of 32 final-year students at two modestly selective national universities in Japan. Expectation state theory that explains unequal…

Engineering Student Outcomes for Grades 9-12. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Childress, Vincent; Rhodes, Craig

2006-01-01

This research study was conducted during the 2005-2006 academic year. Its purpose is to help the National Center for Engineering and Technology Education determine those engineering outcomes that should be studied in high school when the high school student intends to pursue engineering in college. The results of the study will also be used to…

I'm Graduating This Year! So What IS an Engineer Anyway? Research Brief

ERIC Educational Resources Information Center

Matusovich, Holly; Streveler, Ruth; Miller, Ron; Olds, Barbara

2009-01-01

It is often assumed that graduating engineering students readily envision what it means to be an engineer and what type of work they will be doing as engineers in the future. How can one know if this is true? This research begins to answer these questions by aiming to understand undergraduate engineering students' perceptions of themselves as…

FísicActiva: applying active learning strategies to a large engineering lecture

NASA Astrophysics Data System (ADS)

Auyuanet, Adriana; Modzelewski, Helena; Loureiro, Silvia; Alessandrini, Daniel; Míguez, Marina

2018-01-01

This paper presents and analyses the results obtained by applying Active Learning techniques in overcrowded Physics lectures at the University of the Republic, Uruguay. The course referred to is Physics 1, the first Physics course that all students of the Faculty of Engineering take in their first semester for all the Engineering-related careers. Qualitative and quantitative data corresponding to three semesters are shown and discussed, indicating that the students that attended these lectures outperformed the students that followed the course in the traditional way: the pass rates increased, whereas the failure rates decreased. The students highly valued this methodology, in particular, the interactive and relaxed dynamics, highlighting the concern of professors to answer questions by means of new questions so as to promote reasoning. The results obtained point to a work path that deserves to be deepened and extended to other Engineering courses.

An Australian study of possible selves perceived by undergraduate engineering students

NASA Astrophysics Data System (ADS)

Bennett, Dawn; Male, Sally A.

2017-11-01

In this study, we worked with second-year engineering students at an Australian university to examine previously identified threshold concepts within the theoretical framework of Possible Selves. Using workshops as the context for intensive work with students, students were encouraged to consider their future lives and work, including their engineering fears, expectations, and aspirations. The findings revealed many students to have a poor understanding of the realities of engineering work. Moreover, perceived gaps between self-efficacy and the requirements of engineering work appeared to be motivating if students deemed it possible to reduce the gap, but demotivating if they identified a characteristic over which there was perceived to be no control. The study suggests that these engineering students needed more opportunities to explore both the roles of engineers and their own possible selves. Overall, the findings indicate that higher education students may need encouragement and support to explore potential future roles, and they strengthen calls for further research in this area.

Vertical stream curricula integration of problem-based learning using an autonomous vacuum robot in a mechatronics course

NASA Astrophysics Data System (ADS)

Chin, Cheng; Yue, Keng

2011-10-01

Difficulties in teaching a multi-disciplinary subject such as the mechatronics system design module in Departments of Mechatronics Engineering at Temasek Polytechnic arise from the gap in experience and skill among staff and students who have different backgrounds in mechanical, computer and electrical engineering within the Mechatronics Department. The departments piloted a new vertical stream curricula model (VSCAM) to enhance student learning in mechatronics system design through integration of educational activities from the first to the second year of the course. In this case study, a problem-based learning (PBL) method on an autonomous vacuum robot in the mechatronics systems design module was proposed to allow the students to have hands-on experience in the mechatronics system design. The proposed works included in PBL consist of seminar sessions, weekly works and project presentation to provide holistic assessment on teamwork and individual contributions. At the end of VSCAM, an integrative evaluation was conducted using confidence logs, attitude surveys and questionnaires. It was found that the activities were quite appreciated by the participating staff and students. Hence, PBL has served as an effective pedagogical framework for teaching multidisciplinary subjects in mechatronics engineering education if adequate guidance and support are given to staff and students.

Everyday Electrical Engineering: A One-Week Summer Academy Course for High School Students

ERIC Educational Resources Information Center

Mehrizi-Sani, A.

2012-01-01

A summer academy is held for grade 9-12 high school students at the University of Toronto, Toronto, ON, Canada, every year. The academy, dubbed the Da Vinci Engineering Enrichment Program (DEEP), is a diverse program that aims to attract domestic and international high school students to engineering and sciences (and possibly recruit them). DEEP…

Characterizing Design Cognition of High School Students: Initial Analyses Comparing Those with and without Pre-Engineering Experiences

ERIC Educational Resources Information Center

Wells, John; Lammi, Matthew; Gero, John; Grubbs, Michael E.; Paretti, Marie; Williams, Christopher

2016-01-01

Reported in this article are initial results from of a longitudinal study to characterize the design cognition and cognitive design styles of high school students with and without pre-engineering course experience over a 2-year period, and to compare them with undergraduate engineering students. The research followed a verbal protocol analysis…

Interactive Physics: the role of interactive learning objects in teaching Physics in Engineering

NASA Astrophysics Data System (ADS)

Benito, R. M.; Cámara, M. E.; Arranz, F. J.

2009-04-01

In this work we present the results of a Project in educational innovation entitled "Interactive Physics". We have developed resources for teaching Physics for students of Engineering, with an emphasis in conceptual reinforcement and addressing the shortcomings of students entering the University. The resources developed include hypertext, graphics, equations, quizzes and more elaborated problems that cover the customary syllabus in first-year Physics: kinematics and dynamics, Newton laws, electricity and magnetism, elementary circuits… The role of vector quantities is stressed and we also provide help for the most usual mathematical tools (calculus and trigonometric formulas). The structure and level of detail of the resources are fitted to the conceptual difficulties that most of the students find. Some of the most advanced resources we have developed are interactive simulations. These are real simulations of key physical situations, not only animations. They serve as learning objects, in the well known sense of small reusable digital objects that are self-contained and tagged with metadata. In this sense, we use them to link concepts and content through interaction with active engagement of the student. The development of an interactive simulation involves several steps. First, we identify common pitfalls in the conceptual framework of the students and the points in which they stumble frequently. Then we think of a way to make clear the physical concepts using a simulation. After that, we program the simulation (using Flash or Java) and finally the simulation is tested with the students, and we reelaborate some parts of it in terms of usability. In our communication, we discuss the usefulness of these interactive simulations in teaching Physics for engineers, and their integration in a more comprehensive b-learning system.

Comparison of cross culture engineering ethics training using the simulator for engineering ethics education.

PubMed

Chung, Christopher

2015-04-01

This paper describes the use and analysis of the Simulator for Engineering Ethics Education (SEEE) to perform cross culture engineering ethics training and analysis. Details describing the first generation and second generation development of the SEEE are published in Chung and Alfred, Science and Engineering Ethics, vol. 15, 2009 and Alfred and Chung, Science and Engineering Ethics, vol. 18, 2012. In this effort, a group of far eastern educated students operated the simulator in the instructional, training, scenario, and evaluation modes. The pre and post treatment performance of these students were compared to U.S. Educated students. Analysis of the performance indicated that the far eastern educated student increased their level of knowledge 23.7 percent while U.S. educated students increased their level of knowledge by 39.3 percent.

Recruitment and Retention of Indians in Science and Engineering (RISE)

NASA Technical Reports Server (NTRS)

Karnawat, Sunil

1997-01-01

Fifteen students from Turtle Mountain Community College were selected to participate in activities of the RISE project last summer. Eight students successfully completed project activities and received stipends for their participation. These eight students are (1) Jamie Gable, (2) John Morin, (3) Patrick Belgarde, (4) Jason Laducer, (5) Alex Johnson, (6) Eric Houle, (7) Gary Renault, and (8) Kenny DeCoteau. In the fall of 1998, Jamie Gable and Gary Renault went to North Dakota State University to pursue their undergraduate degrees in mechanical engineering, and John Morin and Alex Johnson joined the University of North Dakota's electrical engineering and industrial technology programs, respectively. Remaining four students will continue to participate in the RISE activities this year and transfer to the universities next year. Seven students who failed to complete the RISE project activities during the current award period are encouraged to participate again this fall. The RISE students were enrolled in a special course called "Introduction to Engineering Materials." The project director, Dr. Kamawat, taught the course on Saturdays and Sundays. Theoretical and mathematical background on engineering materials and careers in various engineering professions were discussed in this course. The students attended guest lectures given by engineers and professors and visited local industries. In addition, the students went to North Dakota State University (NDSU) at Fargo, ND, and the University of Minnesota (UMN) at Minneapolis, MN, to tour their engineering departments. At NDSU, they conducted laboratory tests on various engineering materials, such as concrete, steel, wood, plastics, and carbon composites. The students investigated the mechanical behavior of these materials under various loading conditions, collected data, interpreted data, identified possible errors, determined the mechanical properties, and wrote reports on their findings. The students created posters describing their results on the behavior of engineering material. The posters were displayed in the TMCC's student lounge.

A study of the factors affecting advancement and graduation for engineering students

NASA Astrophysics Data System (ADS)

Fletcher, John Thomas

The purpose of this study was, first, to determine whether a set of predictor variables could be identified from pre-enrollment and post-enrollment data that would differentiate students who advance to a major in engineering from non-advancers and, further, to determine if the predictor variables would differentiate students who graduate from the College of Engineering from non-graduates and graduates of other colleges at Auburn University. A second purpose was to determine if the predictor variables would correctly identify male and female students with the same degree of accuracy. The third purpose was to determine if there were significant relationships between the predictor variables studied and grades earned in a set of 15 courses that have enrollments over 100 students and are part of the pre-engineering curriculum. The population for this study was the 868 students who entered the pre-engineering program at Auburn University as freshmen during the Summer and Fall Quarters of 1991. The variables selected to differentiate the different groups were ACT scores, high school grade indices, and first quarter college grade point average. Two sets of classification matrices were developed using analysis and holdout samples that were divided based on sex. With respect to the question about advancement to the professional engineering program, structure coefficients derived from discriminant analysis procedures performed on all the cases combined indicated that first quarter college grade point average, high school math index, ACT math score, and high school science grade index were important predictor variables in classifying students who advanced to the professional engineering program and those who did not. Further, important structure coefficients with respect to graduation with a degree from the College of Engineering were first quarter college grade point average, high school math index, ACT math score, and high school science grade index. The results of this study indicated that significant differences existed in the model's ability to predict advancement and graduation for male and female students. This difference was not unexpected based on the male-dominated population. However, the models identified predicted at a high rate for both male and female students. Finally, many significant relationships were found to exist between the predictor variables and the 15 pre-engineering courses that were selected. The strength of the relationships ranged from a high of .82, p < .001 (Chemistry 103 grade with total high school grade index) to a low of .07, p > .05 (Chemistry 102 with ACT science score).

Learning intervention and the approach to study of engineering undergraduates

NASA Astrophysics Data System (ADS)

Solomonides, Ian Paul

The aim of the research was to: investigate the effect of a learning intervention on the Approach to Study of first year engineering degree students. The learning intervention was a local programme of learning to learn' workshops designed and facilitated by the author. The primary aim of these was to develop students' Approaches to Study. Fifty-three first year engineering undergraduates at The Nottingham Trent University participated in the workshops. Approaches to Study were quantified using data obtained from the Revised Approach to Study Inventory (RASI) which was also subjected to a validity and reliability study using local data. Quantitative outcomes were supplemented using a qualitative analysis of essays written by students during the workshops. These were analysed for detail regarding student Approach to Study. It was intended that any findings would inform the local system of Engineering Education, although more general findings also emerged, in particular in relation to the utility of the research instrument. It was concluded that the intervention did not promote the preferential Deep Approach and did not affect Approaches to Study generally as measured by the RASI. This concurred with previous attempts to change student Approaches to Study at the group level. It was also established that subsequent years of the Integrated Engineering degree course are associated with progressively deteriorating Approaches to Study. Students who were exposed to the intervention followed a similar pattern of deteriorating Approaches suggesting that the local course context and its demands had a greater influence over the Approach of students than the intervention did. It was found that academic outcomes were unrelated to the extent to which students took a Deep Approach to the local assessment demands. There appeared therefore to be a mis-match between the Approach students adopted to pass examinations and those that are required for high quality learning outcomes. It is suggested that more co-ordinated and coherent action for changing the local course demands is needed before an improvement in student Approaches will be observed. These conclusions were broadly supported by the results from the qualitative analysis which also indicated the dominating effects of course context over Approach. However, some students appeared to have gained from the intervention in that they reported being in a better position to evaluate their relationships with the course demands following the workshops. It therefore appeared that some students could be described as being in tension between the desire to take a Deep Approach and the adoption of less desirable Approaches as promoted and encouraged by the course context. It is suggested that questions regarding the integrity of the intervention are thereby left unresolved even though the immediate effects of it are quite clear. It is also suggested that the integrity of the research instrument is open to question in that the Strategic Approach to Study scale failed to be defined by one factor under common factor analysis. The intentional or motivational element which previously defined this scale was found to be associated with a Deep Approach factor within the local context. The Strategic Approach was found to be defined by skill rather than motivation. This indicated that some reinterpretation of the RASI and in particular the Strategic Approach to Study scale is needed.

FOREWORD: 9th Curtin University of Technology Science and Engineering International Conference 2014 (CUTSE2014)

NASA Astrophysics Data System (ADS)

Chieng Chen, Vincent Lee

2015-04-01

A very warm welcome to all participants of the 9th Curtin University Technology, Science and Engineering (CUTSE) Conference 2014. This annual conference dates back to 2006 when the first Curtin University of Technology Science and Engineering (CUTSE) Conference was held in Curtin University, Miri Sarawak. CUTSE Conference was initially intended for Curtin's undergraduates such that they are able to experience the presentation of their work in a conference environment. As time passes and following the urge of knowledge dissemination, CUTSE Conference is hence open to public. This year the Department of Mechanical Engineering has been given the honour to organize the 9th CUTSE Conference. It has been a pleasure to watch CUTSE grow from strength to strength over the years. This year, our theme is "Discovering, Innovating and Engineering". We hope that it is in this spirit that CUTSE participants may align their respective work, such that we all aim for a greater and better implementation of "Discovering, Innovating and Engineering". The 9th CUTSE Conference 2014 is an excellent avenue for researchers, engineers, scientists, academicians, professionals from industry and students to share their research findings and initiate further collaborations in their respective fields. Parallel sessions in Mechanical, Electrical, Computer, Civil and Chemical engineering as well as the sciences will be hosted over a period of two days. Each year, the conference attracts participation from a number of countries in addition to Malaysia and Australia. In addition, student participants will get the opportunity to present their research projects and gain valuable feedback from industry professionals. This year the Conference will be organised by the Department of Mechanical Engineering of Curtin Sarawak's School of Engineering and Science in collaboration with The Institute of Engineers Malaysia, Miri Branch. On behalf of the organizing committee, I would like to thank this year's sponsors and supporters. We appreciate your support for CUTSE 2014 and in research and development, and your foresight in nurturing cutting edge research into industrial applications. CUTSE 2014 would not be possible without the dedicated work and efforts of the organizing committee, who worked tirelessly in all aspects of the conference organization. I thank you for your hard work and commitment towards making CUTSE 2014 a success. Selamat Datai (Welcome) and enjoy the conference. Dr Vincent Lee Chieng Chen Organizing Chairperson, 9th CUTSE Conference 2014

Emotional intelligence among nursing students: Findings from a cross-sectional study.

PubMed

Štiglic, Gregor; Cilar, Leona; Novak, Žiga; Vrbnjak, Dominika; Stenhouse, Rosie; Snowden, Austyn; Pajnkihar, Majda

2018-07-01

Emotional intelligence in nursing is of global interest. International studies identify that emotional intelligence influences nurses' work and relationships with patients. It is associated with compassion and care. Nursing students scored higher on measures of emotional intelligence compared to students of other study programmes. The level of emotional intelligence increases with age and tends to be higher in women. This study aims to measure the differences in emotional intelligence between nursing students with previous caring experience and those without; to examine the effects of gender on emotional intelligence scores; and to test whether nursing students score higher than engineering colleagues on emotional intelligence measures. A cross-sectional descriptive study design was used. The study included 113 nursing and 104 engineering students at the beginning of their first year of study at a university in Slovenia. Emotional intelligence was measured using the Trait Emotional Intelligence Questionnaire (TEIQue) and Schutte Self Report Emotional Intelligence Test (SSEIT). Shapiro-Wilk's test of normality was used to test the sample distribution, while the differences in mean values were tested using Student t-test of independent samples. Emotional intelligence was higher in nursing students (n = 113) than engineering students (n = 104) in both measures [TEIQue t = 3.972; p < 0.001; SSEIT t = 8.288; p < 0.001]. Although nursing female students achieved higher emotional intelligence scores than male students on both measures, the difference was not statistically significant [TEIQue t = -0.839; p = 0.403; SSEIT t = -1.159; p = 0.249]. EI scores in nursing students with previous caring experience were not higher compared to students without such experience for any measure [TEIQue t = -1.633; p = 0.105; SSEIT t = -0.595; p = 0.553]. Emotional intelligence was higher in nursing than engineering students, and slightly higher in women than men. It was not associated with previous caring experience. Copyright © 2018 Elsevier Ltd. All rights reserved.

The Effectiveness and Critical Success Factors of Extensive Reading Lessons, Which We Have Learned during Our Three Years of Practice

NASA Astrophysics Data System (ADS)

Nishizawa, Hitoshi; Yoshioka, Takayoshi; Itoh, Kazuaki

Three years of extensive reading lessons have improved engineering students‧ reading and listening skills in English. The average TOEIC score has increased to 441 points, and the relative numbers of students of lower scores than 350 points have decreased to 14% in the third year when the median reading amount of easy-to-read English texts is about a half million words. The critical success factors are the reading amount and the easiness of English texts read especially in the first term. When students read extremely easy English texts with the help of pictures, they can finally avoid the translation into Japanese and grasp the meaning of the texts directly in English

Assessment of polytechnic students' understanding of basic algebra

NASA Astrophysics Data System (ADS)

Mokmin, Nur Azlina Mohamed; Masood, Mona

2015-12-01

It is important for engineering students to excel in algebra. Previous studies show that the algebraic fraction is a subtopic of algebra that was found to be the most challenging for engineering students. This study is done with 191 first semester engineering students who have enrolled in engineering programs in Malaysian polytechnic. The respondents are divided into Group 1 (Distinction) and Group 2 (Credit) based on their Mathematics SPM result. A computer application is developed for this study to assess student information and understanding of the algebraic fraction topic. The result is analyzed using SPSS and Microsoft Excel. The test results show that there are significant differences between Group 1 and Group 2 and that most of the students scored below the minimum requirement.

Master's in Autonomous Systems: An Overview of the Robotics Curriculum and Outcomes at ISEP, Portugal

ERIC Educational Resources Information Center

Silva, E.; Almeida, J.; Martins, A.; Baptista, J. P.; Campos Neves, B.

2013-01-01

Robotics research in Portugal is increasing every year, but few students embrace it as one of their first choices for study. Until recently, job offers for engineers were plentiful, and those looking for a degree in science and technology would avoid areas considered to be demanding, like robotics. At the undergraduate level, robotics programs are…

Mathematics as a Course of Study in Problem Solving: Then and Now.

ERIC Educational Resources Information Center

Ellis, Wade, Jr.

The mathematics curriculum in the first 2 years of college is a tool created to assist in solving problems. The current mathematics curriculum has changed little; the same topics, tied to the engineering and science curriculum, are taught as they were being taught in 1945. The problems that students need to solve have changed however. Both the…

MATLAB Meets LEGO Mindstorms--A Freshman Introduction Course into Practical Engineering

ERIC Educational Resources Information Center

Behrens, A.; Atorf, L.; Schwann, R.; Neumann, B.; Schnitzler, R.; Balle, J.; Herold, T.; Telle, A.; Noll, T. G.; Hameyer, K.; Aach, T.

2010-01-01

In today's teaching and learning approaches for first-semester students, practical courses more and more often complement traditional theoretical lectures. This practical element allows an early insight into the real world of engineering, augments student motivation, and enables students to acquire soft skills early. This paper describes a new…

[Civil engineering education at the Imperial College of Engineering in Tokyo: an analysis based on Ayahiko Ishibashi's memoirs].

PubMed

Wada, Masanori

2014-01-01

The Imperial College of Engineering (ICE or Kobu-Daigakko) in Tokyo, founded in 1873 under the auspices of the Ministry of Public Works, was one of the most prominent modern institutions of engineering education in early Meiji Japan. Previous studies have revealed that the ICE offered large scale practical training programs at enterprises of the Ministry, which sometimes lasted several months, and praised their ideal combination of theory and practice. In reality, it has been difficult to evaluate the quality of education at the ICE mainly because of scarcity of sources. ICE students published a collection of memoirs for alumni members, commemorating the fiftieth-year of the history of the Tokyo Imperial University. Drawing on the previously neglected collection of students' memoires, this paper appraises the education of civil engineering offered by the ICE. The paper also compares this collection with other official records of the college, and confirms it as a reliable source, even though it contains some minor errors. The author particularly uses the memoirs by Ayahiko Ishibashi, one of the first graduates from its civil engineering course, who left sufficient reminiscences on education that he received. This paper, as a result, illustrates that the main practical training for the students of civil engineering was limited to designing process, including surveying. Furthermore, practical training that Ishibashi received at those enterprises often lacked a plan, and its effectiveness was questionable.

Exploring the Academic and Social Experiences of Latino Engineering Community College Transfer Students at a 4-Year Institution: A Qualitative Research Study

NASA Astrophysics Data System (ADS)

Hagler, LaTesha R.

As the number of historically underrepresented populations transfer from community college to university to pursue baccalaureate degrees in science, technology, engineering, and mathematics (STEM), little research exists about the challenges and successes Latino students experience as they transition from 2-year colleges to 4-year universities. Thus, institutions of higher education have limited insight to inform their policies, practices, and strategic planning in developing effective sources of support, services, and programs for underrepresented students in STEM disciplines. This qualitative research study explored the academic and social experiences of 14 Latino engineering community college transfer students at one university. Specifically, this study examined the lived experiences of minority community college transfer students' transition into and persistence at a 4-year institution. The conceptual framework applied to this study was Schlossberg's Transition Theory, which analyzed the participant's social and academic experiences that led to their successful transition from community college to university. Three themes emerged from the narrative data analysis: (a) Academic Experiences, (b) Social Experiences, and (c) Sources of Support. The findings indicate that engineering community college transfer students experience many challenges in their transition into and persistence at 4-year institutions. Some of the challenges include lack of academic preparedness, environmental challenges, lack of time management skills and faculty serving the role as institutional agents.

The National Technical Association: A Hallmark for Access and Success

NASA Astrophysics Data System (ADS)

Jearld, A., Jr.

2017-12-01

Minority Technical Organizations (MTO) are under-utilized as a valuable resource that can help develop the next generation of scientists and engineers. For over 90 years, the National Technical Association (NTA) (www.ntaonline.org) has been the premiere technical association for scientists, engineers, architects, technologist, educators, and technical business entrepreneurs for people of color, offering professional development, mentoring and awards recognition to technical professionals. NTA and its partners are developing a diverse workforce by emphasizing enhanced access opportunities to skills development for youth among underrepresented STEM populations. Established in 1925 by Charles Summer Duke, the first African American to receive an engineering degree from Harvard University, NTA served as the model organization for more than 40 other minority technical organizations that began forming in the 1970's. NTA has served as consultants to the US government on the status of African Americans in science and engineering. The first technical organization to establish community based technical mentoring programs targeting minorities, NTA shares information and assists institutions in identifying minority talent. Members developed the first science and engineering curriculum at Historically Black Colleges and Universities (HBCU's), and are working to produce more students with geoscience degrees to ensure greater career placement with increased minority participation in the geosciences. NTA addresses the lack of access, support, and the need for networking through the longest running annual conference for technical practitioners of color. A hallmark of NTA has been access and success through inter-organizational collaborations with communities of scholars, highly experienced professionals and students to discuss the definition of what is successful geoscience education, research, and employment.

Advising International Students in Engineering Programs: Academic Advisors' Perceptions of Intercultural Communication Competence

ERIC Educational Resources Information Center

Zhang, Yi Leaf; Dinh, Trang V.

2017-01-01

In recent years, an increasing number of international students have enrolled in engineering programs in U.S. colleges and universities. These students often encounter challenges, and academic advisors play a significant role in international students' academic success. Using a model of intercultural communication competence, we explored attitudes…

An Australian Study of Possible Selves Perceived by Undergraduate Engineering Students

ERIC Educational Resources Information Center

Bennett, Dawn; Male, Sally A.

2017-01-01

In this study, we worked with second-year engineering students at an Australian university to examine previously identified threshold concepts within the theoretical framework of Possible Selves. Using workshops as the context for intensive work with students, students were encouraged to consider their future lives and work, including their…

Factors affecting the retention of first-year female science and engineering students at the University of Michigan

NASA Astrophysics Data System (ADS)

Ballard, Juliet Webb

Alarming to many academics is that while the numbers of female students (at the University of Michigan in particular) in SEM (Science, Engineering, and Mathematics) departments have shown increases in enrollment over the past decades, the number of female professionals in the field has decreased. The purpose of the study was to determine the environmental perceptions of female SEM students in the Women in Science and Engineering (WISE) Program at the University of Michigan. The WISE-RP (Residence Program) is an existing living and learning education program at the university that was designed to facilitate the successful retention and graduation of undergraduate female SEM students in the capacity that the admissions statistics should logically imply. The objectives of the study included identification of the perceptions of female students that contribute to, and foster retention of students participating in the WISE-RP program. The knowledge obtained from this evaluation will guide the University of Michigan in formulating specific interventions and retention approaches, both in and out of the classroom. This was achieved by identifying (among other things) commonality of experiences, and female student's perceptions of acceptance, integration and interactivity. The data used in this secondary analysis was collected over a 2 year period (1999--2001). The primary instrument used for data collection was a structured interview protocol utilizing focus groups. The population and samples studied were comprised of: a research project consisting of 36 focus groups from WISE-RP, University Research Opportunity Program, and the University Research Opportunity in Residence Programs; the sample size of the initial project was 180 first year SEM male and female students. The research project consisted of working with a senior research team at the University of Michigan to develop a structured interview instrument, pilot the instrument, and select focus groups. Content analysis was conducted on the open-ended focus group questions. Three themes emerged from the data set: (a) general contributing factors to retention, (b) support networks and programmatic features that contributed to retention, (c) individual/gender specific challenges that students faced. It found that the initial mission of the program has been accomplished, as evidenced by the findings of this study. The University is graduating and retaining female SEM students at a higher rate than at the program's inception. The challenges for the University at this point include: increasing numbers of female SEM faculty, enhancing and focusing the living learning community mission of the program, integrating student affairs components to the program features on an administrative level, committing to longitudinal analysis and assessment of individual incoming students toward identifying strengths and weaknesses, and finally---committing increased resources to these objectives.

A Phenomenographic Investigation of the Ways Engineering Students Experience Innovation

NASA Astrophysics Data System (ADS)

Fila, Nicholas David

Innovation has become an important phenomenon in engineering and engineering education. By developing novel, feasible, viable, and valued solutions to complex technical and human problems, engineers support the economic competitiveness of organizations, make a difference in the lives of users and other stakeholders, drive societal and scientific progress, and obtain key personal benefits. Innovation is also a complex phenomenon. It occurs across a variety of contexts and domains, encompasses numerous phases and activities, and requires unique competency profiles. Despite this complexity, many studies in engineering education focus on specific aspects (e.g., engineering students' abilities to generate original concepts during idea generation), and we still know little about the variety of ways engineering students approach and understand innovation. This study addresses that gap by asking: 1. What are the qualitatively different ways engineering students experience innovation during their engineering projects? 2. What are the structural relationships between the ways engineering students experience innovation? This study utilized phenomenography, a qualitative research method, to explore the above research questions. Thirty-three engineering students were recruited to ensure thorough coverage along four factors suggested by the literature to support differences related to innovation: engineering project experience, academic major, year in school, and gender. Each participant completed a 1-2 hour, semi-structured interview that focused on experiences with and conceptions of innovation. Whole transcripts were analyzed using an eight-stage, iterative, and comparative approach meant to identify a limited number of categories of description (composite ways of experiencing innovation comprised of the experiences of several participants), and the structural relationships between these categories. Phenomenographic analysis revealed eight categories of description that were structured in a semi-hierarchical, two-dimensional outcome space. The first four categories demonstrated a progression toward greater comprehensiveness in both process and focus dimensions. In the process dimension, subsequent categories added increasingly preliminary innovation phases: idea realization, idea generation, problem scoping, and problem finding. In the focus dimension, subsequent categories added key areas engineers considered during innovation: technical, human, and enterprise. The final four categories each incorporated all previous process phases and focus areas, but prioritized different focus areas in sophisticated ways and acknowledged a macro-iterative cycle, i.e., an understanding of how the processes within a single innovation project built upon and contributed to past and future innovation projects. These results demonstrate important differences between engineering students and suggest how they may come to experience innovation in increasingly comprehensive ways. A framework based on the results can be used by educators and researchers to support more robust educational offerings and nuanced research designs that reflect these differences.

A Case Study: Problem-Based Learning for Civil Engineering Students in Transportation Courses

ERIC Educational Resources Information Center

Ahern, A. A.

2010-01-01

This paper describes two case studies where problem-based learning (PBL) has been introduced to undergraduate civil engineering students in University College Dublin. PBL has recently been put in place in the penultimate and final year transport engineering classes in the civil engineering degree in University College Dublin. In this case study,…

Teaching for quality learning in chemistry

NASA Astrophysics Data System (ADS)

Teixeira-Dias, José J. C.; Pedrosa de Jesus, Helena; Neri de Souza, Francislê; Watts, Mike

2005-09-01

In Portugal, the number of students in higher education increased from 80,000 in 1975 to 381,000 in 2000 (a change from 11% to 53% in the age group 18 22), meaning a major change in the diversity of student population with consequences well known and studied in other countries. The teaching of chemistry at the University of Aveiro, for the first-year students of science and engineering, has been subjected to continuous attention to implement quality and student-centred approaches. The work devoted to excellence and deep learning by several authors has been carefully followed and considered. This communication reports research work on chemistry teaching, associated with those developments for first-year students. The work included the design of strategies and the adoption of teaching and learning activities exploring ways to stimulate active learning by improving the quality of classroom interactions. In addition to regular lectures, large classes' teaching based on student-generated questions was explored. In order to improve students' motivation and stimulate their curiosity, conference-lectures were adopted to deal with selected topics of wide scientific, technological and social interest. Quantitative analysis and discussion of selected case studies, together with the organization of laboratory classes based on selected enquiry-based experiments, planned and executed by students, stimulated deep learning processes. A sample of 32 students was followed in the academic year of 2000/01 and the results obtained are here discussed in comparison with those of a sample of 100 students followed in 2001/02. Particular attention was paid to the quality of classroom interactions, the use of questions by students and their views about the course design.

Success in Undergraduate Engineering Programs: A Comparative Analysis by Race and Gender

NASA Astrophysics Data System (ADS)

Lord, Susan

2010-03-01

Interest in increasing the number of engineering graduates in the United States and promoting gender equality and diversification of the profession has encouraged considerable research on women and minorities in engineering programs. Drawing on a framework of intersectionality theory, this work recognizes that women of different ethnic backgrounds warrant disaggregated analysis because they do not necessarily share a common experience in engineering education. Using a longitudinal, comprehensive data set of more than 79,000 students who matriculated in engineering at nine universities in the Southeastern United States, this research examines how the six-year graduation rates of engineering students vary by disaggregated combinations of gender and race/ethnicity. Contrary to the popular opinion that women drop out of engineering at higher rates, our results show that Asian, Black, Hispanic, Native American, and White women who matriculate in engineering are as likely as men to graduate in engineering in six years. In fact, Asian, Black, Hispanic, and Native American women engineering matriculants graduate at higher rates than men and there is a small difference for white students. 54 percent of White women engineering matriculants graduate in six-years compared with 53 percent of white men. For male and female engineering matriculants of all races, the most likely destination six years after entering college is graduation within engineering. This work underscores the importance of research disaggregated by race and gender and points to the critical need for more recruitment of women into engineering as the low representation of women in engineering education is primarily a reflection of their low representation at matriculation.

Training mechanical engineering students to utilize biological inspiration during product development.

PubMed

Bruck, Hugh A; Gershon, Alan L; Golden, Ira; Gupta, Satyandra K; Gyger, Lawrence S; Magrab, Edward B; Spranklin, Brent W

2007-12-01

The use of bio-inspiration for the development of new products and devices requires new educational tools for students consisting of appropriate design and manufacturing technologies, as well as curriculum. At the University of Maryland, new educational tools have been developed that introduce bio-inspired product realization to undergraduate mechanical engineering students. These tools include the development of a bio-inspired design repository, a concurrent fabrication and assembly manufacturing technology, a series of undergraduate curriculum modules and a new senior elective in the bio-inspired robotics area. This paper first presents an overview of the two new design and manufacturing technologies that enable students to realize bio-inspired products, and describes how these technologies are integrated into the undergraduate educational experience. Then, the undergraduate curriculum modules are presented, which provide students with the fundamental design and manufacturing principles needed to support bio-inspired product and device development. Finally, an elective bio-inspired robotics project course is present, which provides undergraduates with the opportunity to demonstrate the application of the knowledge acquired through the curriculum modules in their senior year using the new design and manufacturing technologies.

A self-assessment of the propensity to obtain future employment: a case of final-year engineering students at the University of Botswana

NASA Astrophysics Data System (ADS)

Ssegawa, Joseph K.; Kasule, Daniel

2017-09-01

The article provides a self-assessment by final-year engineering students at the University of Botswana regarding the propensity to get employment. Students rated which employability attributes are important, the level of attainment and the sources that have facilitated the development of the attributes. Results indicated that students identified the most important attributes as management of time; possessing a high level of technical skills, meeting deadlines and creating viable solutions for solving a problem. They also indicated that they have weaknesses in managing time, meeting deadlines and creating viable solutions (attributes critical to the engineering profession). Students reported that their strengths were in having a positive attitude, orderly physical presentation, adaptation to new environments and willingness to learn new ideas. Students further noted that they developed the attributes from the university academic system followed by their own private activities. The study concludes that students lacked some of the critical attributes of engineering. They therefore, need to be explicitly and holistically sensitised as to how the attributes relate to their profession, employment and career development. As part of the review of the engineering programmes, sensitisation could be included in the induction process at enrolment.

College physics students' epistemological self-reflection and its relationship to conceptual learning

NASA Astrophysics Data System (ADS)

May, David B.; Etkina, Eugenia

2002-12-01

Students should develop self-reflection skills and appropriate views about knowledge and learning, both for their own sake and because these skills and views may be related to improvements in conceptual understanding. We explored the latter issue in the context of an introductory physics course for first-year engineering honors students. As part of the course, students submitted weekly reports, in which they reflected on how they learned specific physics content. The reports by 12 students were analyzed for the quality of reflection and some of the epistemological beliefs they exhibited. Students' conceptual learning gains were measured with standard survey instruments. We found that students with high conceptual gains tend to show reflection on learning that is more articulate and epistemologically sophisticated than students with lower conceptual gains. Some implications for instruction are suggested.

Two Different Approaches to Teaching Final-Year Projects for Mechanical Engineers and Biotechnologists at Ngee Ann Polytechnic: Case Studies Approach.

ERIC Educational Resources Information Center

Walsh, Kath; Rebaczonok-Padulo, Michael

The Oral and Written Communication (OWC) course at Ngee Ann Polytechnic was originally intended to equip students with occupational skills (e.g., report- and letter-writing, public speaking) but has expanded to be a course aimed at helping third-year mechanical engineering students to develop third-year project reports. This has been done through…

Attitudes and Aspirations Regarding Engineering among Chinese Secondary School Students: Comparisons between Industrialising and Post-Industrial Geo-Engineering Regions of Mainland China and Hong Kong

ERIC Educational Resources Information Center

Kutnick, Peter; Zhu, Zhiyong; Chan, Cecilia; Chan, Rosanna Yuen-Yan; Lee, Betty Pok-Yee; Lai, Veronica Ka Wai

2018-01-01

School-based pipelines/routes for university and technical engineering education are recognised as important for economic development and the high-school years are critical for shaping students' career aspirations and attitudes. This study examined a range of attitudes/experiences on the aspirations of secondary students to pursue engineering…

Implementation of Protocols To Enable Doctoral Training in Physical and Computational Chemistry of a Blind Graduate Student.

PubMed

Minkara, Mona S; Weaver, Michael N; Gorske, Jim; Bowers, Clifford R; Merz, Kenneth M

2015-08-11

There exists a sparse representation of blind and low-vision students in science, technology, engineering and mathematics (STEM) fields. This is due in part to these individuals being discouraged from pursuing STEM degrees as well as a lack of appropriate adaptive resources in upper level STEM courses and research. Mona Minkara is a rising fifth year graduate student in computational chemistry at the University of Florida. She is also blind. This account presents efforts conducted by an expansive team of university and student personnel in conjunction with Mona to adapt different portions of the graduate student curriculum to meet Mona's needs. The most important consideration is prior preparation of materials to assist with coursework and cumulative exams. Herein we present an account of the first four years of Mona's graduate experience hoping this will assist in the development of protocols for future blind and low-vision graduate students in computational chemistry.

Profile of prospective bioengineering students at National University of San Juan

NASA Astrophysics Data System (ADS)

Lopez, N.; Puzzella, A.; Zabala, A.; Demartini, H.; Alborch, A.; Cabrera, L.

2007-11-01

The low percentage of students (43 % of applicants) that passed the entrance exams for the bioengineering career at the National University of San Juan in 2007, plus the historical situation of desertion in first year (about 50%), motivated the application of a diagnostic test to prospective students of this career. The aim of this test was to obtain information about the competences acquired by students to solve problems in different contexts using basic mathematical tools, reading comprehension skills to understand texts, graphs and tables. Although this test was sat by the entire population of applicants of the current school year, only the results belonging to bioengineering students are the ones presented for the purpose of this work. However, students of other disciplines of the school of engineering also have similar problems. From the analysis of the answers to the different items, it can be observed that there are serious difficulties in the development of basic capacities to successfully take the courses of this career.

Undergraduate Research at SETI in Astrobiology

NASA Astrophysics Data System (ADS)

Kress, Monika; Phillips, C.; DeVore, E.; Hubickyj, O.

2012-05-01

The SETI Institute and San Jose State University (SJSU) have begun a partnership (URSA: Undergraduate Research at the SETI Institute in Astrobiology) in which undergraduate science and engineering majors from SJSU participate in research at the SETI Institute during the academic year. We are currently in our second year of the three-year NASA-funded grant. The goal of this program is to expose future scientists, engineers and educators to the science of astrobiology and to NASA in general, and by so doing, to prepare them for the transition to their future career in the Silicon Valley or beyond. The URSA students are mentored by a SETI Institute scientist who conducts research at the SETI Institute headquarters or nearby at NASA Ames Research Center. The SETI Institute is a private, nonprofit organization dedicated to scientific research, education and public outreach. Its mission is to explore, understand and explain the origin, nature and prevalence of life in the universe. SJSU is a large urban public university that serves the greater Silicon Valley area in California. Students at SJSU come from diverse ethnic, cultural and socioeconomic backgrounds. Many of them face financial pressures that force them to pursue part-time work. URSA students are paid to work for 10 hours/week during the academic year, and also participate in monthly group meetings where they practice their presentation skills and discuss future plans. We encourage underserved and underrepresented students, including women, minority, and those who are the first in their family to go to college, to apply to the URSA program and provide ongoing mentoring and support as needed. While preparing students for graduate school is not a primary goal, some of our students have gone on to MS or PhD programs or plan to do so. The URSA program is funded by NASA EPOESS.

High School Students' Perceptions of the Effects of International Science Olympiad on Their STEM Career Aspirations and Twenty-First Century Skill Development

NASA Astrophysics Data System (ADS)

Sahin, Alpaslan; Gulacar, Ozcan; Stuessy, Carol

2015-12-01

Social cognitive theory guided the design of a survey to investigate high school students' perceptions of factors affecting their career contemplations and beliefs regarding the influence of their participation in the international Science Olympiad on their subject interests and twenty-first century skills. In addition, gender differences in students' choice of competition category were studied. Mixed methods analysis of survey returns from 172 Olympiad participants from 31 countries showed that students' career aspirations were affected most by their teachers, personal interests, and parents, respectively. Students also indicated that they believed that their participation in the Olympiad reinforced their plan to choose a science, technology, engineering, and mathematics (STEM) major at college and assisted them in developing and improving their twenty-first century skills. Furthermore, female students' responses indicated that their project choices were less likely to be in the engineering category and more likely to be in the environment or energy categories. Findings are discussed in the light of increasing the awareness of the role and importance of Science Olympiads in STEM career choice and finding ways to attract more female students into engineering careers.

Lubrication System 2. Service the Crankcase Breather. Student Manual. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual on servicing the crankcase breather is the third of three in an instructional package on the lubrication system in the Small Engine Repair Series for handicapped students. The stated purpose for the booklet is to help students learn what tools and equipment to use and all the steps of the job. Informative material and…

NASA, Engineering, and Swarming Robots

NASA Technical Reports Server (NTRS)

Leucht, Kurt

2015-01-01

This presentation is an introduction to NASA, to science and engineering, to biologically inspired robotics, and to the Swarmie ant-inspired robot project at KSC. This presentation is geared towards elementary school students, middle school students, and also high school students. This presentation is suitable for use in STEM (science, technology, engineering, and math) outreach events. The first use of this presentation will be on Oct 28, 2015 at Madison Middle School in Titusville, Florida where the author has been asked by the NASA-KSC Speakers Bureau to speak to the students about the Swarmie robots.

Freshman-year experiences for African-American students in engineering

NASA Astrophysics Data System (ADS)

Chapple, Bernadette Maria

1998-12-01

The purpose of this study was to discover (a) why African American students choose to persist as an engineering major and (b) why students choose to leave engineering as a major. A total of 17 students from a large land-grant university participated in this study that was both quantitative and qualitative in design. This research will assist both the College of Engineering and the University in understanding the educational experiences of the matriculating African American pre-engineering student. In an effort to provide reasons and rationale for why African American engineering students choose to stay in this major and why other African American engineering student majors choose to leave, the researcher examined an undergraduate engineering program at a large land-grant institution in the South. The College of Engineering at this institution was able to institute several programs designed to increase the number of African American students choosing engineering as a major. Although initiatives for pre-collegiate students are important in the retention of African American students, it is the retention of those students once accepted into a program of study that the institution focuses on most. It is the intent of this study to offer a better understanding of such a retention initiative. Due to the decline of African American students pursuing majors in science and mathematics in general and in engineering in particular, an important research concern is to offer more insight into the experiences of the freshman engineering student in an attempt to develop fundamental reasons for why students remain in engineering and why some students leave. To assist the College of Engineering and the University in understanding the educational experiences of the matriculating African American pre-engineering student the data were collected from both a quantitative and qualitative approach. Results indicated that (a) students who chose to persist in the engineering program where highly committed and motivated to achieve their educational goals and (b) students who decided to switch out of the engineering curriculum simply felt unprepared for the demands of the engineering curriculum and, upon further exploration of the curriculum, discovered that engineering was not the career they initially desired.

Advancing Space Sciences through Undergraduate Research Experiences at UC Berkeley's Space Sciences Laboratory - a novel approach to undergraduate internships for first generation community college students

NASA Astrophysics Data System (ADS)

Raftery, C. L.; Davis, H. B.; Peticolas, L. M.; Paglierani, R.

2015-12-01

The Space Sciences Laboratory at UC Berkeley launched an NSF-funded Research Experience for Undergraduates (REU) program in the summer of 2015. The "Advancing Space Sciences through Undergraduate Research Experiences" (ASSURE) program recruited heavily from local community colleges and universities, and provided a multi-tiered mentorship program for students in the fields of space science and engineering. The program was focussed on providing a supportive environment for 2nd and 3rd year undergraduates, many of whom were first generation and underrepresented students. This model provides three levels of mentorship support for the participating interns: 1) the primary research advisor provides academic and professional support. 2) The program coordinator, who meets with the interns multiple times per week, provides personal support and helps the interns to assimilate into the highly competitive environment of the research laboratory. 3) Returning undergraduate interns provided peer support and guidance to the new cohort of students. The impacts of this program on the first generation students and the research mentors, as well as the lessons learned will be discussed.

Process Systems Engineering Education: Learning by Research

ERIC Educational Resources Information Center

Abbas, A.; Alhammadi, H. Y.; Romagnoli, J. A.

2009-01-01

In this paper, we discuss our approach in teaching the final-year course Process Systems Engineering. Students are given ownership of the course by transferring to them the responsibility of learning. A project-based group environment stimulates learning while solving a real engineering problem. We discuss postgraduate student involvement and how…

Design, development, and evaluation of a second generation interactive Simulator for Engineering Ethics Education (SEEE2).

PubMed

Alfred, Michael; Chung, Christopher A

2012-12-01

This paper describes a second generation Simulator for Engineering Ethics Education. Details describing the first generation activities of this overall effort are published in Chung and Alfred (Sci Eng Ethics 15:189-199, 2009). The second generation research effort represents a major development in the interactive simulator educational approach. As with the first generation effort, the simulator places students in first person perspective scenarios involving different types of ethical situations. Students must still gather data, assess the situation, and make decisions. The approach still requires students to develop their own ability to identify and respond to ethical engineering situations. However, were as, the generation one effort involved the use of a dogmatic model based on National Society of Professional Engineers' Code of Ethics, the new generation two model is based on a mathematical model of the actual experiences of engineers involved in ethical situations. This approach also allows the use of feedback in the form of decision effectiveness and professional career impact. Statistical comparisons indicate a 59 percent increase in overall knowledge and a 19 percent improvement in teaching effectiveness over an Internet Engineering Ethics resource based approach.

First-Grade Engineers

ERIC Educational Resources Information Center

Bautista, Nazan Uludag; Peters, Kari Nichole

2010-01-01

Can students build a house that is cost effective and strong enough to survive strong winds, heavy rains, and earthquakes? First graders in Ms. Peter's classroom worked like engineers to answer this question. They participated in a design challenge that required them to plan like engineers and build strong and cost-effective houses that would fit…

Bridges with Trigonometry Equals Engineering Achievement

ERIC Educational Resources Information Center

Gathing, Ahmed L.

2011-01-01

Exemplary and fun technology education classes in high schools are always welcome. The author introduces bridge building to his ninth graders and other students who comprise the Introduction to Engineering and Technology course within the first two months of the fall semester. In Georgia, Introduction to Engineering and Technology is the first of…

Student experience of a scenario-centred curriculum

NASA Astrophysics Data System (ADS)

Bell, Sarah; Galilea, Patricia; Tolouei, Reza

2010-06-01

In 2006 UCL implemented new scenario-centred degree programmes in Civil and Environmental Engineering. The new curriculum can be characterised as a hybrid of problem-based, project-based and traditional approaches to learning. Four times a year students work in teams for one week on a scenario which aims to integrate learning from lecture and laboratory classes and to develop generic skills including team working and communication. Student experience of the first two years the old and new curricula were evaluated using a modified Course Experience Questionnaire. The results showed that students on the new programme were motivated by the scenarios and perceived better generic skills development, but had a lower perception of teaching quality and the development of design skills. The results of the survey support the implementation new curriculum but highlight the importance of strong integration between conventional teaching and scenarios, and the challenges of adapting teaching styles to suit.

Preparing minority undergraduate students for successful science careers.

NASA Astrophysics Data System (ADS)

Akundi, Murty

2008-03-01

Xavier University of Louisiana is well known for being number one in graduating the most minority students in physical and biological sciences. The reason for this success is built on the concept of Standards with Sympathy in the Sciences (Triple S). This is an outgrowth of over twenty years of planning and development by the Xavier science faculty to devise a program for preparing and retaining students in the sciences and engineering. Xavier has been successfully conducting for over ten years, Summer Science Academy (SSA) for middle and high school students; Science Technology, Engineering and Mathematics (STEM) Scholars and Howard Hughes Biomedical programs for in-coming freshmen. Recently, through a grant from NSF, we have developed the Experiential Problem-solving and Analytical Reasoning (EPsAR) summer bridge program for in-coming freshmen who were given conditional admission to the university (i.e., those students who scored below the acceptable range for placement into degree mathematics courses). In this program, EPsAR participants will be engaged in problem-solving and critical thinking activities for eight hours per day, five days per week, for six weeks. Additionally, an interdisciplinary approach is taken to convey the mathematical skills learned to relate to physics, chemistry, biology, and computer science. Sixty-six students have participated in the last two years in the EPsAR program. During the first year 23 of 28 students successfully bi-passed the algebra review course and were placed into a degree credit course in mathematics. In the second year, thirty-one (31) of the 38 were advanced to a higher-level mathematics course. Twenty-three (23) out of 38 went on to degree credit math course. To retain students in the sciences peer tutoring in all the science disciplines are made available to students throughout the day for 5 days per week. Faculty and students are available to give guidance to the needed students. The University has established a Graduate Placement Office and a Center for Undergraduate Research to facilitate students' pursuit of gradate studies. The results of these efforts indicate a 40 percent graduation rate in four years and increased to 90 percent in six years in the natural sciences and 50 percent of these graduates pursue graduate/professional careers.

Expert vs. novice: Problem decomposition/recomposition in engineering design

NASA Astrophysics Data System (ADS)

Song, Ting

The purpose of this research was to investigate the differences of using problem decomposition and problem recomposition among dyads of engineering experts, dyads of engineering seniors, and dyads of engineering freshmen. Fifty participants took part in this study. Ten were engineering design experts, 20 were engineering seniors, and 20 were engineering freshmen. Participants worked in dyads to complete an engineering design challenge within an hour. The entire design process was video and audio recorded. After the design session, members participated in a group interview. This study used protocol analysis as the methodology. Video and audio data were transcribed, segmented, and coded. Two coding systems including the FBS ontology and "levels of the problem" were used in this study. A series of statistical techniques were used to analyze data. Interview data and participants' design sketches also worked as supplemental data to help answer the research questions. By analyzing the quantitative and qualitative data, it was found that students used less problem decomposition and problem recomposition than engineer experts in engineering design. This result implies that engineering education should place more importance on teaching problem decomposition and problem recomposition. Students were found to spend less cognitive effort when considering the problem as a whole and interactions between subsystems than engineer experts. In addition, students were also found to spend more cognitive effort when considering details of subsystems. These results showed that students tended to use dept-first decomposition and experts tended to use breadth-first decomposition in engineering design. The use of Function (F), Behavior (B), and Structure (S) among engineering experts, engineering seniors, and engineering freshmen was compared on three levels. Level 1 represents designers consider the problem as an integral whole, Level 2 represents designers consider interactions between subsystems, and Level 3 represents designers consider details of subsystems. The results showed that students used more S on Level 1 and 3 but they used less F on Level 1 than engineering experts. The results imply that engineering curriculum should improve the teaching of problem definition in engineering design because students need to understand the problem before solving it.

Extensive Graded Reading with Engineering Students: Effects and Outcomes

ERIC Educational Resources Information Center

Hagley, Eric

2017-01-01

Extensive graded reading (EGR) was carried out with a cohort of 600 engineering students in a university in northern Japan. Pre-and post-surveys were conducted to discover changes in the general reading habits of students, their attitudes toward the assessment method and how goals changed over the course of study. The first survey was carried out…

Are Fourth-Year Medical Students Effective Teachers of the Physical Examination to First-Year Medical Students?

PubMed Central

Haist, Steven A; Wilson, John F; Fosson, Sue E; Brigham, Nancy L

1997-01-01

OBJECTIVE To determine if fourth-year medical students are as effective as faculty in teaching the physical examination to first-year medical students. DESIGN Stratified randomization of the first-year students. SETTING A public medical school. PARTICIPANTS All 100 first-year medical students in one medical school class were randomly assigned (controlling for gender) to either a faculty or a fourth-year student preceptor for the Physical Examination Module. MAIN RESULTS The first-year students of faculty preceptors scored no differently on the written examination than the students of the fourth-year medical student preceptors (82.8% vs 80.3%, p = .09) and no differently on a standardized patient practical examination (95.5% vs 95.4%, p = .92). Also, the first-year students rated the two groups of preceptors similarly on an evaluation form, with faculty rated higher on six items and the student preceptors rated higher on six items (all p > .10). The fourth-year student preceptors rated the experience favorably. CONCLUSIONS Fourth-year medical students were as successful as faculty in teaching first-year medical students the physical examination as measured by first-year student’s performances on objective measures and ratings of teaching effectiveness.

Exploration of Relationship Between Stress and Spirituality Characteristics of Male and Female Engineering Students: A Comprehensive Study.

PubMed

Yadav, Radha; Khanna, Ashu; Singh, Dharmendra

2017-04-01

This observational paper endeavours to recognize the connection between spirituality and stress. Four types of indicators are utilized for the estimation of anxiety, vis-à-vis, behavioural indicators, emotional indicators, sleep indicators and personal habits. As per pre-documented theory, if spirituality is high within an individual, then his/her stress will be low and vice versa. In college, the stress of education and scoring grades influences the understudy. Information is gathered through a survey in the light of spirituality index and stress index. Findings prove that the indicators of the stress are more visible in female students. Apart from this, there has been not much substantial study in the area of stress and spirituality among college students. Hence, the main purpose of this study was to discuss the various types of stress and effects of spirituality on the engineering students belonging to the age group of 21-26 years, prioritizing the indicators of stress as per the gender of students. The entire study constituted of a sample group of 200 participants, and for the entire process, correlation analysis was used to find the relative relation between spirituality and stress among girls and boys. T test is used for rejection of the null hypothesis. The article focuses on the current issues that students have been facing in the twenty-first century. Result of the study showed that there is a negative relationship between the spirituality and stress of male and female students. Moreover, the article provides unique contribution to the literature and also offers suggestions for generating new research ideas that can be used to ameliorate the problems that plague individuals and organizations in today's world. This is the first article which covers the spirituality and stress of the engineering student and discusses the impact on young adults, as well as highlighting certain ways to overcome stress and enhance spirituality.

Applying results from Physics Education Research in a large first-year service course

NASA Astrophysics Data System (ADS)

Ahrensmeier, Daria

2012-10-01

First-year service courses are among the most challenging teaching appointments, due to factors such as lack of motivation, lack of academic preparation, and huge class size. I will describe how the Labatorial Project at the University of Calgary strives to apply results from Physics Education research on inquiry-based learning, addressing misconceptions, peer instruction etc. to the small group sections of these courses. After a brief overview of the design and implementation of the labatorials for a first-year course for engineering students, I will focus on the aspects of change management and sustainability: how one initial change led to a sequence of related modifications, from the lectures to the exams and TA training, accompanied by a natural process of faculty professional development.

Connections between Future Time Perspectives and Self-Regulated Learning for Mid-Year Engineering Students: A Multiple Case Study

ERIC Educational Resources Information Center

Chasmar, Justine

2017-01-01

This dissertation presents multiple studies with the purpose of understanding the connections between undergraduate engineering students' motivations, specifically students' Future Time Perspectives (FTPs) and Self-Regulated Learning (SRL). FTP refers to the views students hold about the future and how their perceptions of current tasks are…

Attitudes and Perceptions of Students in a Systems Engineering E-Learnig Course

ERIC Educational Resources Information Center

de Vega, Carolina Armijo; McAnally-Salas, Lewis; Lavigne, Gilles

2009-01-01

In this paper is reported the attitudes and perception of students in a systems Engineering e-learning course and a teacher with more than six years of experience teaching online courses. The paper reports the teacher and students' perceptions about the e-learning courses experience. Personalized interviews with some of the students were carried…

Scholarship program to benefit future engineers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-02-01

ASDSO this year launched a new scholarship program for undergraduate students interested in dam safety engineering as a career. Two scholarships of $2,500 each will be granted to one junior and one senior, beginning with the 1993 school year. Students taking a full college course load and majoring in civil or agricultural engineering, geology, or a related field, were elgible. ASDSO, which plans to name the recipients by May 1993, received about two dozen applications for the scholarships.

Puzzle-based learning in engineering mathematics: students' attitudes

NASA Astrophysics Data System (ADS)

Klymchuk, Sergiy

2017-11-01

The article reports on the results of two case studies on the impact of the regular use of puzzles as a pedagogical strategy in the teaching and learning of engineering mathematics. The intention of using puzzles is to engage students' emotions, creativity and curiosity and also to enhance their generic thinking skills and lateral thinking 'outside the box'. Students' attitudes towards this pedagogical strategy are evaluated via short questionnaires with two groups of university students taking a second-year engineering mathematics course. Students' responses to the questionnaire are presented and analyzed in the paper.