Sample records for fish ladders

  1. White sturgeon (Acipenser transmontanus) passage at the Dalles Dam, Columbia River, USA

    USGS Publications Warehouse

    Parsley, M.J.; Wright, C.D.; Van Der Leeuw, B. K.; Kofoot, E.E.; Peery, C.A.; Moser, M.L.

    2007-01-01

    White sturgeon (Acipenser transmontanus) ???95 cm TL were monitored using acoustic and radio telemetry at a large hydroelectric dam (the Dalles Dam) on the Columbia River, during March 2004 through November 2005 to determine timing and routes of passage and to characterize general movements. Transmitters were surgically implanted into 148 fish during the study; 90 were released into the tailrace and 58 into the forebay. We documented 26 passage events by 19 tagged fish: eight upstream via fish ladders and 18 downstream, mostly through open spill gates. During the study 17 fish entered the two ladders one or more times; 11 entered only the east ladder, three entered only the north ladder, and three entered both ladders at sometime. Residence time within the ladders by individual fish was variable, ranging from about 1 min to nearly 6 months (median = 7.7 h). Only six fish successfully ascended the east ladder, one fish twice. We could not unequivocally determine which fish ladder one fish used to pass upstream. Differences in construction between the north and east fish ladders may account for the greater success of the east fish ladder in passing sturgeon upstream. Changes to operations at hydroelectric dams to benefit migrating anadromous salmonids may influence upstream or downstream passage by white sturgeon. Altering patterns and timing of spill discharge, altering fish ladder entrance attraction flows, and the use of lights, sound, and partial barriers to direct other species of fish to preferred passage routes have unknown effects on sturgeon passage. A better understanding of the consequences to the metapopulation of increasing or precluding upstream or downstream passage is needed. ?? 2007 The Authors.

  2. 24. DETAIL EXTERIOR VIEW LOOKING EAST, SHOWING FISH LADDER AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. DETAIL EXTERIOR VIEW LOOKING EAST, SHOWING FISH LADDER AT NORTH END OF DAM/SPILLWAY; WATER FLOWING THROUGH FISH LADDER IS VISIBLE AT BOTTOM. - Bonneville Project, Bonneville Dam, Columbia River, Bonneville, Multnomah County, OR

  3. 22. DETAIL EXTERIOR VIEW LOOKING NORTHWEST, SHOWING FISH LADDER AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. DETAIL EXTERIOR VIEW LOOKING NORTHWEST, SHOWING FISH LADDER AT NORTH END OF DAM/SPILLWAY; VIEW SHOWS SECTION OF FISH LADDER NEAR WHERE IT ENTERS THE COLUMBIA RIVER. - Bonneville Project, Bonneville Dam, Columbia River, Bonneville, Multnomah County, OR

  4. 7. DETAIL VIEW OF LOWER MOUTH OF FISH LADDER AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. DETAIL VIEW OF LOWER MOUTH OF FISH LADDER AT ROCK OUTCROPPING, SHOWING NATURAL CARVED ROCK POOLS, UPPER PORTION OF FISH LADDER VISIBLE IN DISTANCE, LOOKING SOUTHWEST (UPSTREAM) - Van Arsdale Dam, South Fork of Eel River, Ukiah, Mendocino County, CA

  5. Passage and behaviour of cultured Lake Sturgeon in a prototype side-baffle fish ladder: I. Ladder hydraulics and fish ascent

    USGS Publications Warehouse

    Kynard, B.; Pugh, D.; Parker, T.

    2011-01-01

    Research and development of a fish ladder for sturgeons requires understanding ladder hydraulics and sturgeon behaviour in the ladder to insure the ladder is safe and provides effective passage. After years of research and development, we designed and constructed a full-scale prototype side-baffle ladder inside a spiral flume (38.3m long??1m wide??1m high) on a 6% (1:16.5) slope with a 1.92-m rise in elevation (bottom to top) to test use by sturgeons. Twenty-eight triangular side baffles, each extending part way across the flume, alternated from inside wall to outside wall down the ladder creating two major flow habitats: a continuous, sinusoidal flow down the ladder through the vertical openings of side-baffles and an eddy below each side baffle. Ascent and behaviour was observed on 22 cultured Lake Sturgeon=LS (Acipenser fulvescens) repeatedly tested in groups as juveniles (as small as 105.1cm TL, mean) or as adults (mean TL, 118cm) during four periods (fall 2002 and 2003; spring 2003 and 2007). Percent of juveniles entering the ladder that ascended to the top was greater in spring (72.7%) than in fall (40.9-45.5%) and 90.9% of 11 adults, which ascended as juveniles, ascended to the top. Six LS (27.3%) never swam to the top and seven (31.8%) swam to the top in all tests, indicating great variability among individuals for ascent drive. Some LS swam directly to the top in <1min, but most rested in an eddy during ascent. Juveniles swimming through outside wall baffle slots (mean velocity, 1.2ms-1) swam at 1.8-2.2body lengthss-1 and 3.2-3.3tail beatss-1, either at or approaching prolonged swimming speed. The side-baffle ladder was stream-like and provided key factors for a sturgeon ladder: a continuous flow and no full cross-channel walls, abundant eddies for resting, an acceptable water depth, and a water velocity fish could ascend swimming 2bls-1. A side-baffle ladder passes LS and other moderate-swimming fishes. ?? 2011 Blackwell Verlag, Berlin.

  6. 1. OVERALL VIEW SHOWING FACE OF CONCRETE GRAVITY DAM AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. OVERALL VIEW SHOWING FACE OF CONCRETE GRAVITY DAM AND FISH LADDER, LOOKING SOUTHWEST (UPSTREAM) FROM SNORE OPPOSITE FISH LADDER - Van Arsdale Dam, South Fork of Eel River, Ukiah, Mendocino County, CA

  7. 16. View, looking west, of fish ladder and steel frame ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. View, looking west, of fish ladder and steel frame supporting fish trap, both constructed by U.S. Army Corps of Engineers, 1949. One-story wood-frame building with hip roof is a utility shed used for fish-trap operation. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA

  8. Influence of seasonal, diel, lunar, and other environmental factors on upstream fish passage in the igarapava fish ladder, Brazil

    USGS Publications Warehouse

    Bizzotto, P.M.; Godinho, Alexandre L.; Vono, V.; Kynard, B.; Godinho, Hugo P.

    2009-01-01

    Upstream fish passage was evaluated during 12 months in the vertical-slot Igarapava Fish Ladder constructed around Igarapava Dam, in the heavily dammed Grande River, Southeast Brazil. A video monitoring system was used to observe 61,621 fish that passed the ladder, of which 93.5% were identified to 15 taxa. Among the migratory species, the most abundant were Pimelodus maculatus (33.6% of all fish), Leporinus octofasciatus (31.4%), Leporinus friderici (4.5%), and Prochilodus lineatus (3.1%). Seven taxa were classified as nonmigratory, and of these taxa, the small Bryconamericus stramineus was the most abundant (12.7%) of all fishes. Passage of the 'nonmigratory' taxa upstream in the ladder shows they are migratory in this system and have a strong behavioural drive to move to upstream habitat. Passage of most taxa had a strong seasonal pattern. While some species passed primarily during the day, others showed a distinct nocturnal pattern. Lunar phase and water temperature also strongly affected passage of some taxa. Rainfall and dam discharge had a small or null influence on most taxa; perhaps due to the fairly small catchment area of the reservoir and the highly regulated discharge at Igarapava Dam. ?? 2009 John Wiley & Sons A/S.

  9. Upstream dispersal of an invasive crayfish aided by a fish passage facility

    USGS Publications Warehouse

    Welsh, Stuart A.; Loughman, Zachary J.

    2015-01-01

    Fish passage facilities for reservoir dams have been used to restore habitat connectivity within riverine networks by allowing upstream passage for native species. These facilities may also support the spread of invasive species, an unintended consequence and potential downside of upstream passage structures. We documented dam passage of the invasive virile crayfish, Orconectes virilis (Hagen, 1870), at fish ladders designed for upstream passage of American eels, Anguilla rostrata (Lesueur, 1817), in the Shenandoah River drainage, USA. Ladder use and upstream passage of 11 virile crayfish occurred from 2007–2014 during periods of low river discharge (<30 m3s–1) and within a wide range of water temperatures from 9.0–28.6 °C. Virile crayfish that used the eel ladders were large adults with a mean carapace length and width of 48.0 mm and 24.1 mm, respectively. Our data demonstrated the use of species-specific fish ladders by a non-target non-native species, which has conservation and management implications for the spread of aquatic invasive species and upstream passage facilities. Specifically, managers should consider implementing long-term monitoring of fish passage facilities with emphasis on detection of invasive species, as well as methods to reduce or eliminate passage of invasive species. 

  10. Growth, smoltification, and smolt-to-adult return of spring chinook salmon from hatcheries on the Deschutes river, Oregon

    USGS Publications Warehouse

    Beckman, B.R.; Dickhoff, Walton W.; Zaugg, W.S.; Sharpe, C.; Hirtzel, S.; Schrock, R.; Larsen, D.A.; Ewing, R.D.; Palmisano, A.; Schreck, C.B.; Mahnken, C.V.W.

    1999-01-01

    The relationship between smoltification and smolt-to-adult return (SAR) of spring chinook salmon Oncorhynchus tshawytscha from the Deschutes River, Oregon, was examined for four release groups in each of three successive years. Fish were reared, marked with coded wire tags, and released from Round Butte Hatchery, Pelton Ladder rearing facility, and Warm Springs National Fish Hatchery. Smolt releases occurred in nearly the same place at similar times, allowing a direct comparison of SAR to several characters representing smolt quality. Return rates varied significantly among facilities, varying over an order of magnitude each year. The highest average SAR was from Pelton Ladder, the lowest was from Warm Springs. Each of the characters used as metrics of smoltification - fish size, spring growth rate (February-April), condition factor, plasma hormone concentration (thyroxine, cortisol, and insulin-like growth factor-I [IGF-I]), stress challenge, gill Na+,K+-ATPase activity, and liver glycogen concentration - varied significantly among facilities and seasonally within hatchery groups. However, only spring growth rate, gill ATPase activity, and plasma IGF-I concentration showed significant relationships to SAR. These characters and SAR itself were consistently lower for fish released from Warm Springs Hatchery than for fish from Round Butte Hatchery and Pelton Ladder. This demonstrates that differences in the quality of fish released by facilities may have profound effects on subsequent survival and suggests that manipulations of spring growth rate may be used to influence the quality of smolts released from facilities.

  11. A semi-automated method of monitoring dam passage of American Eels Anguilla rostrata

    USGS Publications Warehouse

    Welsh, Stuart A.; Aldinger, Joni L.

    2014-01-01

    Fish passage facilities at dams have become an important focus of fishery management in riverine systems. Given the personnel and travel costs associated with physical monitoring programs, automated or semi-automated systems are an attractive alternative for monitoring fish passage facilities. We designed and tested a semi-automated system for eel ladder monitoring at Millville Dam on the lower Shenandoah River, West Virginia. A motion-activated eel ladder camera (ELC) photographed each yellow-phase American Eel Anguilla rostrata that passed through the ladder. Digital images (with date and time stamps) of American Eels allowed for total daily counts and measurements of eel TL using photogrammetric methods with digital imaging software. We compared physical counts of American Eels with camera-based counts; TLs obtained with a measuring board were compared with TLs derived from photogrammetric methods. Data from the ELC were consistent with data obtained by physical methods, thus supporting the semi-automated camera system as a viable option for monitoring American Eel passage. Time stamps on digital images allowed for the documentation of eel passage time—data that were not obtainable from physical monitoring efforts. The ELC has application to eel ladder facilities but can also be used to monitor dam passage of other taxa, such as crayfishes, lampreys, and water snakes.

  12. Walla Walla River Fish Passage Operations Program, 2004-2005 Annual Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bronson, James P.; Duke, Bill B.

    2006-02-01

    In the late 1990s, the Confederated Tribes of the Umatilla Indian Reservation, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife, along with many other agencies, began implementing fisheries restoration activities in the Walla Walla Basin. An integral part of these efforts is to alleviate the inadequate fish migration conditions in the basin. The migration concerns are being addressed by removing diversion structures, constructing fish passage facilities, implementing minimum instream flow requirements, and providing trap and haul efforts when needed. The objective of the Walla Walla River Fish Passage Operations Project is to increase the survivalmore » of migrating adult and juvenile salmonids in the Walla Walla River basin. The project is responsible for coordinating operation and maintenance of ladders, screen sites, bypasses, trap facilities, and transportation equipment. In addition, the project provides technical input on passage criteria and passage and trapping facility design and operation. Operation of the various passage facilities and passage criteria guidelines are outlined in an annual operations plan that the project develops. During the 2004-2005 project year, there were 590 adult summer steelhead, 31 summer steelhead kelts (Oncorhynchus mykiss), 70 adult bull trout (Salvelinus confluentus); 80 adult and 1 jack spring Chinook (O. tshawytscha) enumerated at the Nursery Bridge Dam fishway video counting window between December 13, 2004, and June 16, 2005. Summer steelhead and spring chinook were observed moving upstream while bull trout were observed moving both upstream and downstream of the facility. In addition, the old ladder trap was operated by ODFW in order to enumerate fish passage. Of the total, 143 adult summer steelhead and 15 summer steelhead kelts were enumerated at the west ladder at Nursery Bridge Dam during the video efforts between February 4 and May 23, 2005. Operation of the Little Walla Walla River juvenile trap for trap and haul purposes was not necessary this year.« less

  13. Hood River Production Master Plan.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    O'Toole, Patty

    1991-07-01

    The Northwest Power Planning Council's 1987 Columbia River Fish and Wildlife Program authorizes the development of artificial production facilities to raise chinook salmon and steelhead for enhancement in the Hood, Umatilla, Walla Walla, Grande Ronde and Imnaha rivers and elsewhere. On February 26, 1991 the Council agreed to disaggregate Hood River from the Northeast Oregon Hatchery Project, and instead, link the Hood River Master Plan (now the Hood River Production Plan) to the Pelton Ladder Project (Pelton Ladder Master Plan 1991).

  14. 50 CFR Table 15 to Part 679 - Gear Codes, Descriptions, and Use

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., power gurdy TROLL X X 15 X X All other gear types OTH X X ADF&G GEAR CODES Diving 11 X X Dredge 22 X X Dredge, hydro/mechanical 23 X X Fish ladder/raceway 77 X X Fish wheel 08 X X Gillnet, drift 03 X X...

  15. Walla Walla River Fish Passage Operations Program, 2003-2004 Annual Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bronson, James P.

    2004-12-01

    In the late 1990s, the Confederated Tribes of the Umatilla Indian Reservation, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife, along with many other agencies, began implementing fisheries restoration activities in the Walla Walla Basin. An integral part of these efforts is to alleviate the inadequate fish migration conditions in the basin. The migration concerns are being addressed by removing diversion structures, constructing fish passage facilities, implementing minimum instream flow requirements, and providing trap and haul efforts when needed. The objective of the Walla Walla River Fish Passage Operations Project is to increase the survivalmore » of migrating adult and juvenile salmonids in the Walla Walla River basin. The project is responsible for coordinating operation and maintenance of ladders, screen sites, bypasses, trap facilities, and transportation equipment. In addition, the project provides technical input on passage criteria and passage and trapping facility design and operation. Operation of the various passage facilities and passage criteria guidelines are outlined in an annual operations plan that the project develops. During the 2003-2004 project year, there were 379 adult summer steelhead (Oncorhynchus mykiss), 36 adult bull trout (Salvelinus confluentus); 108 adult and 3 jack spring chinook (O. tshawytscha) enumerated at the Nursery Bridge Dam fishway video counting window between December 21, 2003, and June 30, 2004. Summer steelhead and spring chinook were observed moving upstream while bull trout were observed moving both upstream and downstream of the facility. In addition, the old ladder trap was operated by the WWBNPME project in order to radio tag spring chinook adults. A total of 2 adult summer steelhead, 4 bull trout, and 23 adult spring chinook were enumerated at the west ladder at Nursery Bridge Dam during the trapping operations between May 6 and May 23, 2004. Operation of the Little Walla Walla River juvenile trap for trap and haul purposes was not necessary this year. The project transported adult spring chinook from Threemile Dam to the South Fork Walla Walla Brood Holding Facility. A total of 239 spring chinook were outplanted in August for natural spawning in the basin.« less

  16. Hood River and Pelton Ladder Evaluation Studies : Annual Report 1994.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Olsen, Erik A.; French, Rod A.; Ritchey, Alan D.

    1995-09-01

    In 1992, the Northwest Power Planning Council approved the Hood River and Pelton ladder master plans within the framework of the Columbia River Basin Fish and Wildlife Program. The master plans define an approach for implementing a hatchery supplementation program in the Hood River subbasin. The hatchery program as defined in the master plans is called the Hood River Hatchery Production Program (HRPP). The HRPP will be phased in over several years and will be jointly implemented by the Oregon Department of Fish and Wildlife (ODFW) and the Confederated Tribes of the Warm Springs (CTWS) Reservation. In December 1991, amore » monitoring and evaluation program was implemented in the Hood River subbasin to collect life history and production information on stocks of anadromous salmonids returning to the Hood River subbasin. The program was implemented to provide the baseline information needed to: (1) evaluate various management options for implementing the HRPP and (2) determine any post-project impacts the HRPP has on indigenous populations of resident fish. Information collected during the 1992-94 fiscal years will also be used to prepare an environmental impact statement (EIS) evaluating the program`s impact on the human environment. To begin construction on project facilities, it was proposed that the HRPP be implemented in two phases. Phase I would include work that would fall under a {open_quotes}categorical exclusion{close_quotes} from NEPA, and Phase II would include work requiring an EIS prior to implementation. This report summarizes the life history and escapement data collected in the Hood River subbasin and the status work of implemented under Phase I of the HR Life history and escapement data will be used to: (1) test the assumptions on which harvest and escapement goals for the Hood River and Pelton ladder master plans are based and (2) develop biologically based management recommendations for implementing the HRPP.« less

  17. Exposure of sea bream (Sparus aurata) to toxic concentrations of benzo[a]pyrene: possible human health effect.

    PubMed

    Zena, R; Speciale, A; Calabrò, C; Calò, M; Palombieri, D; Saija, A; Cimino, F; Trombetta, D; Lo Cascio, P

    2015-12-01

    Polycyclic aromatic hydrocarbons (PAHs) can accumulate in the food chain, due to their lipophilic properties. Fish can accumulate contaminants including PAHs and frequent consumption of such contaminated fish can pose risk to human health. The aim of this study was to clarify if acute exposure of sea bream (Sparus aurata, a fish species of great economic importance in the Atlantic and Mediterranean areas) to a PAH, benzo[a]pyrene (B[a]P), at a dose that can induce CYP1A and pathological changes in fish gills, liver and muscle, can induce accumulation in muscle. We investigated the cytotoxic effects (as changes in cell viability, DNA laddering and glutathione content) of in vitro exposure of human peripheral blood mononuclear cells (PBMCs) to organic extracts obtained from muscle of sea breams previously exposed via water to B[a]P (2mg/l, for 12, 24 and 72 h). At this level of exposure, B[a]P caused morphological changes, inflammatory response and CYP1A induction not only in sea bream gills and liver but also in muscle; furthermore, in fish muscle we observed a substantial B[a]P accumulation, which may be associated with the increased CYP1A activity in liver and especially in muscle. However, when PBMCs were exposed to organic extracts obtained from sea bream muscle contaminated with B[a]P, a toxic, although modest effect was revealed, consisting in a significant decrease in cell glutathione levels without alterations in cell viability and DNA laddering. This suggests that consumption of sea breams from B[a]P contaminated waters might represent a risk for human health. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Walla Walla River Basin Fish Screen Evaluations; Nursery Bridge Fishway and Garden City/Lowden II Sites, 2005-2006 Progress Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chamness, Mickie

    2006-06-01

    Pacific Northwest National Laboratory (PNNL) evaluated two fish screen facilities in the Walla Walla River basin in 2005 and early 2006. The Garden City/Lowden screen site was evaluated in April and June 2005 to determine whether the fish screens met National Marine Fisheries Service criteria to provide safe passage for juvenile salmonids. Louvers behind the screens at the Nursery Bridge Fishway were modified in fall 2005 in an attempt to minimize high approach velocities. PNNL evaluated the effects of those modifications in March 2006. Results of the Garden City/Lowden evaluations indicate the site performs well at varying river levels andmore » canal flows. Approach velocities did not exceed 0.4 feet per second (fps) at any time. Sweep velocities increased toward the fish ladder in March but not in June. The air-burst mechanism appears to keep large debris off the screens, although it does not prevent algae and periphyton from growing on the screen face, especially near the bottom of the screens. At Nursery Bridge, results indicate all the approach velocities were below 0.4 fps under the moderate river levels and operational conditions encountered on March 7, 2006. Sweep did not consistently increase toward the fish ladder, but the site generally met the criteria for safe passage of juvenile salmonids. Modifications to the louvers seem to allow more control over the amount of water moving through the screens. We will measure approach velocities when river levels are higher to determine whether the louver modifications can help correct excessive approach velocities under a range of river levels and auxiliary water supply flows.« less

  19. 111. Photocopy of original construction drawing, dated 31 January 1935 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    111. Photocopy of original construction drawing, dated 31 January 1935 (Original print in the possession of U.S. Army Corps of Engineers, Portland District, Portland, OR.) (T-1-28) PROPOSED MODEL OF DIFFUSING CHAMBERS AND GRATINGS FOR POWERHOUSE FISHWAY AND FISH LADDERS. - Bonneville Project, Powerhouse No.1, Spanning Bradford Slough, from Bradford Island, Bonneville, Multnomah County, OR

  20. Changes in fish communities following recolonization of the Cedar river, Wa, USA by Pacific salmon after 103 years of local extirpation

    USGS Publications Warehouse

    Kiffney, P.M.; Pess, G.R.; Anderson, J.H.; Faulds, P.; Burton, Kenneth; Riley, S.C.

    2009-01-01

    Migration barriers are a major reason for species loss and population decline of freshwater organisms. Significant efforts have been made to remove or provide passage around these barriers; however, our understanding of the ecological effects of these efforts is minimal. Installation of a fish passage facility at the Landsburg Dam, WA, USA provided migratory fish access to habitat from which they had been excluded for over 100 years. Relying on voluntary recruitment, we examined the effectiveness of this facility in restoring coho (Oncorhynchus kisutch) salmon populations above the diversion, and whether reintroduction of native anadromous species affected the distribution and abundance of resident trout (O. mykiss and O. clarki). Before the ladder, late summer total salmonid (trout only) density increased with distance from the dam. This pattern was reversed after the ladder was opened, as total salmonid density (salmon {thorn} trout) approximately doubled in the three reaches closest to the dam. These changes were primarily due to the addition of coho, but small trout density also increased in lower reaches and decreased in upper reaches. A nearby source population, dispersal by adults and juveniles, low density of resident trout and high quality habitat above the barrier likely promoted rapid colonization of targeted species. Our results suggest that barrier removal creates an opportunity for migratory species to re-establish populations leading to range expansion and potentially to increased population size. ?? 2008 John Wiley & Sons, Ltd.

  1. Polyketide synthesis genes associated with toxin production in two species of Gambierdiscus (Dinophyceae).

    PubMed

    Kohli, Gurjeet S; John, Uwe; Figueroa, Rosa I; Rhodes, Lesley L; Harwood, D Tim; Groth, Marco; Bolch, Christopher J S; Murray, Shauna A

    2015-05-28

    Marine microbial protists, in particular, dinoflagellates, produce polyketide toxins with ecosystem-wide and human health impacts. Species of Gambierdiscus produce the polyether ladder compounds ciguatoxins and maitotoxins, which can lead to ciguatera fish poisoning, a serious human illness associated with reef fish consumption. Genes associated with the biosynthesis of polyether ladder compounds are yet to be elucidated, however, stable isotope feeding studies of such compounds consistently support their polyketide origin indicating that polyketide synthases are involved in their biosynthesis. Here, we report the toxicity, genome size, gene content and transcriptome of Gambierdiscus australes and G. belizeanus. G. australes produced maitotoxin-1 and maitotoxin-3, while G. belizeanus produced maitotoxin-3, for which cell extracts were toxic to mice by IP injection (LD50 = 3.8 mg kg(-1)). The gene catalogues comprised 83,353 and 84,870 unique contigs, with genome sizes of 32.5 ± 3.7 Gbp and 35 ± 0.88 Gbp, respectively, and are amongst the most comprehensive yet reported from a dinoflagellate. We found three hundred and six genes involved in polyketide biosynthesis, including one hundred and ninety-two ketoacyl synthase transcripts, which formed five unique phylogenetic clusters. Two clusters were unique to these maitotoxin-producing dinoflagellate species, suggesting that they may be associated with maitotoxin biosynthesis. This work represents a significant step forward in our understanding of the genetic basis of polyketide production in dinoflagellates, in particular, species responsible for ciguatera fish poisoning.

  2. Evaluation of Fish Passage Sites in the Walla Walla River Basin, 2008

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chamness, Mickie A.

    2008-08-29

    In 2008, Pacific Northwest National Laboratory evaluated the Hofer Dam fish screen and provided technical assistance at two other fish passage sites as requested by the Bonneville Power Administration, the Walla Walla Watershed Council, or the Confederated Tribes of the Umatilla Indian Reservation. Evaluation of new sites such as Hofer Dam focuses on their design, construction, operation, and maintenance to determine if they effectively provide juvenile salmonids with safe passage through irrigation diversions. There were two requests for technical assistance in 2008. In the first, the Confederated Tribes of the Umatilla Indian Reservation requested an evaluation of the Nursery Bridgemore » fish screens associated with the fish ladder on the east side of the Walla Walla River. One set of brushes that clean the screens was broken for an extended period. Underwater videography and water velocity measurements were used to determine there were no potential adverse effects on juvenile salmonids when the west set of screens was clean enough to pass water normally. A second request, received from the National Marine Fisheries Service and the Walla Walla Watershed Council, asked for evaluation of water velocities through relatively new head gates above and adjacent to the Eastside Ditch fish screens on the Walla Walla River. Water moving through the head gates and not taken for irrigation is diverted to provide water for the Nursery Bridge fish ladder on the east side of the river. Elevations used in the design of the head gates were incorrect, causing excessive flow through the head gates that closely approached or exceeded the maximum swimming burst speed of juvenile salmonids. Hofer Dam was evaluated in June 2008. PNNL researchers found that conditions at Hofer Dam will not cause impingement or entrainment of juvenile salmonids but may provide habitat for predators and lack strong sweeping flows to encourage juvenile salmonid passage downstream. Further evaluation of velocities at the Eastside Ditch and wasteway gates should occur as changes are made to compensate for the design problems. These evaluations will help determine whether further changes are required. Hofer Dam also should be evaluated again under more normal operating conditions when the river levels are typical of those when fish are emigrating and the metal plate is not affecting flows.« less

  3. Evaluation of Lower Umatilla River Channel Modifications Below Three Mile Dam, 1984 Annual Progress Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nigro, Anthony A.; Ward, David L.

    1985-05-01

    This report summarizes results of the first year of a study initiated in September 1984 to evaluate the adequacy of channel modifications made in the lower Umatilla River to improve adult anadromous salmonid passage to Three Mile Dam (RKm 5.6), determine if fish passage or delay problems exist at Three Mile Dam and recommend site specific corrective measures if needed. Movements of steelhead (Salmo gairdneri) were monitored using mark and recapture and radio telemetry techniques. Thirty-four steelhead were marked with T-anchor tags and released in the lower river. Fifteen of those marked were also fitted with radio transmitters. Three radiotaggedmore » steelhead migrated through channel modifications to Three Mile Dam. Two of these fish migrated to the dam in less than 26 hours, but held just below the dam for 7 and 10 days before entering the ladders. The third steelhead delayed for 30 days and entered the west ladder within 24 hours of arrival at the dam. Two other radiotagged steelhead moved upstream through some of the channel modifications but did not migrate to the dam. Only one of 19 marked steelhead not fitted with transmitters was recovered at Three Mile Dam. 14 refs., 18 figs., 3 tabs.« less

  4. Prevention of Prespawning Mortality: Cause of Salmon Headburns and Cranial Lesions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Neitzel, Duane A.; Elston, R A.; Abernethy, Cary S.

    2004-06-01

    This project was to undertaken to provide information about a condition known as ''headburn''. Information from the project will enable U.S. Corps of Engineers managers to make adjustments in operational procedures or facilities on the Columbia and Snake rivers to prevent loss of pre-spawning adult salmonids that migrate through the facilities. Headburn is a descriptive clinical term used by fishery biologists to describe scalping or exfoliation of skin and ulceration of underlying connective tissue and muscle, primarily of the jaw and cranial region of salmonids observed at fish passage facilities. Headburn lesions are primarily caused when fish collide with concretemore » or other structures at dams and fish passage facilities, and may be exacerbated in some fish that ''fallback'' or pass over spillways or through turbine assemblies after having passed the dam through a fish ladder. Prespawning mortality of headburned salmonids can be prevented or greatly reduced by therapeutic treatment of both hatchery and wild fish. Treatments would consist of topical application of an anti-fungal agent, injection of replacement plasma electrolytes into the peritoneal cavity, and injection of a broad-spectrum antibacterial agent at fish passage and trapping facilities or hatcheries.« less

  5. Cell proliferation and apoptosis in the anterior intestine of an amphibious, euryhaline mudskipper (Periophthalmus modestus).

    PubMed

    Takahashi, H; Sakamoto, T; Narita, K

    2006-06-01

    In order to replace the diffusive loss of water to the surrounding environment, seawater (SW)-acclimated euryhaline fishes have gastrointestinal tracts with higher ion/water flux in concert with greater permeability, and contrast that to freshwater (FW)-acclimated fish. To understand the cellular basis for these differences, we examined cell proliferation and apoptosis in the anterior intestine of mudskipper transferred from one-third SW to FW or to SW for 1 and 7 days, and those kept out of water for 1 day. The intestinal apoptosis (indicated by DNA laddering) increased during seawater acclimation. TUNEL staining detected numerous apoptotic cells over the epithelium of SW-acclimated fish. Cell proliferation ([3H]thymidine incorporation) in the FW fish was greater than those in SW 7 days after transfer. Labeling with a Proliferating cell nuclear antigen (PCNA) antibody indicated that proliferating cells were greater in number and randomly distributed in the epithelium of FW fish, whereas in SW fish they were almost entirely in the troughs of the intestinal folds. There were no changes in cell turnover in fish kept out of water. During acclimation to different salinities, modification of the cell turnover and abundance may play an important role in regulating the permeability (and transport capacity) of the gastrointestinal tract of fish.

  6. Standard specification for light ladders

    NASA Astrophysics Data System (ADS)

    1980-11-01

    Requirements are given for the construction, inspection, and testing of single ladders, extension ladders, step-ladders, extending step-ladders, trestle ladders, extending trestle ladders, and special purpose ladders. The composition of the aluminum alloys, and of the steels and glass fiber reinforced polyester components coming into contact with the aluminum are included. Coatings used to provide corrosion resistance are also specified.

  7. 11. VIEW FROM JUST AFT OF THE KING POST IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. VIEW FROM JUST AFT OF THE KING POST IN THE FOC'S'LE OF THE EVELINA M. GOULART. FIRE EXTINGUISHER IS MOUNTED ON STUB OF FOREMAST. OBJECT AT LOWER LEFT IS A FOLDING MESS TABLE. LADDER LEADS TO DECK. CABINET AT RIGHT CENTER HOUSED SINK FOR CLEAN-UP AND COOKING. A SMALL CHINA SINK AT RIGHT CENTER SERVED FOR PERSONAL CLEAN-UP AND SHAVING. - Auxiliary Fishing Schooner "Evelina M. Goulart", Essex Shipbuilding Museum, 66 Main Street, Essex, Essex County, MA

  8. Formaldehyde substitute fixatives: effects on nucleic acid preservation.

    PubMed

    Moelans, Cathy B; Oostenrijk, Daphne; Moons, Michiel J; van Diest, Paul J

    2011-11-01

    In surgical pathology, formalin-fixed paraffin-embedded tissues are increasingly being used as a source of DNA and RNA for molecular assays in addition to histopathological evaluation. However, the commonly used formalin fixative is carcinogenic, and its crosslinking impairs DNA and RNA quality. The suitability of three new presumably less toxic, crosslinking (F-Solv) and non-crosslinking (FineFIX, RCL2) alcohol-based fixatives was tested for routine molecular pathology in comparison with neutral buffered formalin (NBF) as gold standard. Size ladder PCR, epidermal growth factor receptor sequence analysis, microsatellite instability (MSI), chromogenic (CISH), fluorescence in situ hybridisation (FISH) and qPCR were performed. The alcohol-based non-crosslinking fixatives (FineFIX and RCL2) resulted in a higher DNA yield and quality compared with crosslinking fixatives (NBF and F-Solv). Size ladder PCR resulted in a shorter amplicon size (300 bp) for both crosslinking fixatives compared with the non-crosslinking fixatives (400 bp). All four fixatives were directly applicable for MSI and epidermal growth factor receptor sequence analysis. All fixatives except F-Solv showed clear signals in CISH and FISH. RNA yield and quality were superior after non-crosslinking fixation. qPCR resulted in lower Ct values for RCL2 and FineFIX. The alcohol-based non-crosslinking fixatives performed better than crosslinking fixatives with regard to DNA and RNA yield, quality and applicability in molecular diagnostics. Given the higher yield, less starting material may be necessary, thereby increasing the applicability of biopsies for molecular studies.

  9. 29 CFR 1917.119 - Portable ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Requirements for Portable Reinforced Plastic Ladders (d) Standards for job-made portable ladders. Job-made... usage. (1) Ladders made by fastening rungs or devices across a single rail are prohibited. (2) Ladders...

  10. 29 CFR 1918.23 - Jacob's ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ladder. (d) When a Jacob's ladder is being used so that there is a danger of an employee falling or being... ladders. (a) Jacob's ladders shall be of the double rung or flat tread type. They shall be well maintained... pulled up entirely. (c) When a Jacob's ladder is used as the means of access to a barge being worked...

  11. 29 CFR 1917.118 - Fixed ladders.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... tubular scaffold framing; and (4) Ladders used only for fire-fighting or emergency purposes. (b... a ladder, including individual rung ladders, permanently attached to a structure, building or piece... walls of the well. (c) Defects. (1) Ladders with broken, split or missing rungs, steps or rails, broken...

  12. 29 CFR 1917.118 - Fixed ladders.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... tubular scaffold framing; and (4) Ladders used only for fire-fighting or emergency purposes. (b... a ladder, including individual rung ladders, permanently attached to a structure, building or piece... walls of the well. (c) Defects. (1) Ladders with broken, split or missing rungs, steps or rails, broken...

  13. 29 CFR 1917.118 - Fixed ladders.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... tubular scaffold framing; and (4) Ladders used only for fire-fighting or emergency purposes. (b... a ladder, including individual rung ladders, permanently attached to a structure, building or piece... walls of the well. (c) Defects. (1) Ladders with broken, split or missing rungs, steps or rails, broken...

  14. Effects of foot placement, hand positioning, age and climbing biodynamics on ladder slip outcomes.

    PubMed

    Pliner, Erika M; Campbell-Kyureghyan, Naira H; Beschorner, Kurt E

    2014-01-01

    Ladder falls frequently cause severe injuries; yet the factors that influence ladder slips/falls are not well understood. This study aimed to quantify (1) the effects of restricted foot placement, hand positioning, climbing direction and age on slip outcomes, and (2) differences in climbing styles leading to slips versus styles leading to non-slips. Thirty-two occupational ladder users from three age groups (18-24, 25-44 and 45-64 years) were unexpectedly slipped climbing a vertical ladder, while being assigned to different foot placement conditions (unrestricted vs. restricted toe clearance) and different hand positions (rails vs. rungs). Constraining foot placement increased the climber's likelihood of slipping (p < 0.01), while younger and older participants slipped more than the middle-aged group (p < 0.01). Longer double stance time, dissimilar and more variable foot and body positioning were found in styles leading to a slip. Maintaining sufficient toe clearance and targeting ladder safety training to younger and older workers may reduce ladder falls. Practitioner Summary: Ladder falls frequently cause severe occupational fall injuries. This study aims to identify safer ladder climbing techniques and individuals at risk of falling. The results suggest that ladders with unrestricted toe clearance and ladder climbing training programmes, particularly for younger and older workers, may reduce ladder slipping risk.

  15. Ladder Safety Live #12985

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chochoms, Michael

    2017-02-23

    This course presents information for working safely with portable ladders: specifically, stepladders, extensions ladders, and their derivations. Additionally, this course provides limited information on the safe use of stepstools and fixed ladders. The skills, techniques, and good practices needed for selecting, inspecting, setting up and securing, and using ladders are presented in this course.

  16. Ladder polymers for use as high temperature stable resins or coatings

    NASA Technical Reports Server (NTRS)

    Meador, Mary Ann (Inventor)

    1990-01-01

    An object of the invention is to synthesize a new class of ladder and partial ladder polymers. In accordance with the invention, the new class of ladder and partial ladder polymers are synthesized by polymerizing a bis-dienophile with a bis-diene. Another object of the invention is to provide a fabricated, electrically conducting, void free composite comprising the new class of the ladder and partial ladder polymers described above. The novelty of the invention relates to a new class of ladder and partial ladder polymers and a process for synthesizing these polymers. These polymers are soluble in common organic solvents and are characterized with a unique dehydration property at temperatures of 300 to 400 C to provide thermo-oxidatively stable pentiptycene units along the polymeric backbone. These polymers are further characterized with high softening points and good thermo-oxidative stability properties. Thus these polymers have potential as processable, matrix resins for high temperature composite applications.

  17. 29 CFR 1917.119 - Portable ladders.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) MARINE TERMINALS Terminal Facilities § 1917.119 Portable ladders. (a) Scope and applicability... Requirements for Portable Reinforced Plastic Ladders (d) Standards for job-made portable ladders. Job-made...

  18. Career ladder program for registered nurses in ambulatory care.

    PubMed

    Nelson, Joan; Sassaman, Becky; Phillips, Alison

    2008-01-01

    RN ladder programs are designed to inspire and reward clinical excellence. Kaiser Permanente Colorado's (KPCO) career ladder program emerged as a result of a labor-management partnership. Career ladder point assignments are reflective of the organization's priorities and values. KPCO's career ladder point tool awards RNs for formal and continuing education, professional presentations, organizational experience and experience as an RN, certifications and active professional memberships, leadership activities, research and publications, and nursing-related volunteer work. Participation in the RN career ladder requires that the nurse achieve a self-determined, manager-approved, measurable goal that will improve patient care. Career ladder nurses at KPCO were significantly more involved in leadership and interdisciplinary activities, quality improvement projects, and preceptorship.

  19. Work-related ladder fall fractures: identification and diagnosis validation using narrative text.

    PubMed

    Smith, Gordon S; Timmons, Robert A; Lombardi, David A; Mamidi, Dheeresh K; Matz, Simon; Courtney, Theodore K; Perry, Melissa J

    2006-09-01

    To identify ladder-related fracture injuries and determine how ladder fall fractures differ from other ladder-related injuries. Ladder-related fracture cases were identified using narrative text and coded data from workers' compensation claims. Potential cases were identified by text searches and verified with claim records. Injury characteristics were compared using proportionate injury ratios. Of 9826 ladder-related injuries, 7% resulted in fracture cases. Falls caused 89% of fractures and resulted in more medical costs and disability days than other injuries. Frequent mechanisms were ladder instability (22%) and lost footing (22%). Narrative text searches identified 17% more fractures than injury codes alone. Males were more likely to sustain a fall fracture than other injuries; construction workers were most likely, and retail workers were the least likely to sustain fractures. Fractures are an important injury from ladder falls, resulting more serious consequences than other ladder-related injuries. Text analysis can improve the quality and utility of workers compensation data by identifying and understanding injury causes. Proportionate injury ratios are also useful for making cross-group comparisons of injury experience when denominator data are not available. Greater attention to risk factors for ladder falls is needed for targeting interventions.

  20. Hood River and Pelton Ladder Evaluation Studies, Annual Report 2000-2001.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Olsen, Erik

    The Bonneville Power Administration (BPA) funded the development of two master plans which outline the rationale, and general approach, for implementing a defined group of projects that are an integral part of a comprehensive watershed goal to 'Protect, enhance and restore wild and natural populations of anadromous and resident fish within the Hood River Subbasin'. The Hood River Production Master Plan and the Pelton Ladder Master Plan were completed in 1991 and subsequently approved by the Northwest Power Planning Council in 1992. Action items identified in the two master plans, as well as in a later document entitled 'Hood River/Peltonmore » Ladder Master Agreement' (ODFW and CTWSRO Undated), are designed to achieve two biological fish objectives: (1) to increase production of wild summer and winter steelhead (Oncorhynchus mykiss) to levels commensurate with the subbasins current carrying capacity and (2) re-establishing a self-sustaining population of spring chinook salmon (Oncorhynchus tshawytscha). Numerical fish objectives for subbasin escapement, spawner escapement, and subbasin harvest are defined for each of these species in Coccoli (2000). Several projects are presently funded by the BPA to achieve the Hood River subbasin's numerical fish objectives for summer and winter steelhead and spring chinook salmon. They include BPA project numbers 1998-021-00 (Hood River Fish Habitat), 1998-053-03 (Hood River Production Program - CTWSRO: M&E), 1998-053-07 (Parkdale Fish Facility), 1998-053-08 (Powerdale/Oak Springs O&M), and 1998-053-12 (Hood River Steelhead Genetics Study). Collectively, they are implemented under the umbrella of what has come to be defined as the Hood River Production Program (HRPP). The HRPP is jointly implemented by the Oregon Department of Fish and Wildlife (ODFW) and The Confederated Tribes of the Warm Springs Reservation of Oregon (CTWSRO). Strategies for achieving the HRPP's biological fish objectives for the Hood River subbasin were initially devised based on various assumptions about (1) subbasin carrying capacity, (2) survival rates for selected life history stages, and (3) historic and current escapements of wild, natural, and hatchery stocks of anadromous salmonids to the Hood River subbasin. The Oregon Department of Fish and Wildlife began funding a monitoring and evaluation (M&E) project in December 1991 to collect the quantitative biological information needed to (1) more accurately assess the validity of these assumptions and (2) evaluate the proposed hatchery supplementation component of the HRPP. Bonneville Power Administration assumed funding of the M&E project in August 1992. The M&E project was initially confined to sampling anadromous salmonids escaping to an adult trapping facility operated at Powerdale Dam; which is located at River Mile (RM) 4.5 on the mainstem of the Hood River. Stock specific life history and biological data was collected to (1) monitor subbasin spawner escapements and (2) collect pre-implementation data critical to evaluating the newly proposed HRPP's potential biological impact on indigenous populations of resident fish. The scope of the M&E project was expanded in 1994 to collect the data needed to quantify (1) subbasin smolt production and carrying capacity, (2) smolt to adult survival rates, and (3) the spatial distribution of indigenous populations of summer and winter steelhead, spring and fall chinook salmon, and coho salmon. A creel was incorporated into the M&E project in December 1996 to evaluate the HRPP with respect to its defined subbasin and spawner escapement objectives for Hood River stocks of wild and hatchery summer and winter steelhead and for natural and Deschutes stock hatchery spring chinook salmon. In 1996, the M&E project also began monitoring streamflow at various locations in the Hood River subbasin. Streamflow data will be used to correlate subbasin smolt production with summer streamflows. Data collected from 1991-1999 is reported in the following annual progress reports: Olsen et al. (1994), Olsen et al. (1995), Olsen and French (1996), Olsen et al. (1996), Olsen and French (1999), and Olsen and French (2000). The annual progress reports document information collected on (1) rearing densities of indigenous fish, (2) subbasin steelhead smolt production, (3) post-release survival of acclimated and direct released hatchery summer and winter steelhead smolts, (4) smolt to adult anadromous salmonid survival rates, (5) jack and adult anadromous salmonid escapements and harvest, (6) spatial distribution of adult anadromous salmonid holding in the Hood River subbasin, (7) selected life history patterns and morphological and meristic characteristics of wild, natural, and hatchery resident and anadromous salmonids, and (8) summer streamflows.« less

  1. Pro-apoptotic effect of fly ash leachates in hepatocytes of freshwater fish (Channa punctata Bloch).

    PubMed

    Ali, Mehboob; Rahman, Shakilur; Rehman, Hasibur; Bhatia, Kanchan; Ansari, Rizwan A; Raisuddin, Sheikh

    2007-02-01

    The pro-apoptotic effect of fly ash leachates (FAL) was studied in the hepatocytes of an Indian freshwater fish, Channa punctata Bloch. Hepatocytes were exposed to different concentrations of '7-day' FAL for 24 and 48h and various parameters of apoptosis were studied using standardized procedures. FAL-induced apoptosis in hepatocytes was indicated by cytological examination, DNA fragmentation and DNA laddering. The induction in cytochrome-c release, caspases 3, 7, 10 and 9 activities and lactate dehydrogenase level provide mechanistic platform for FAL-induced apoptosis. Cytological examination showed an unambiguous apoptotic effect of ash leachates in fish hepatocytes. Exposed hepatocytes also showed increased production of H(2)O(2), superoxide ions and an increase in lipid peroxidation (LPO). The present study suggests a possible role of reactive oxygen species (ROS) in FAL-induced apoptosis in hepatocytes. Lactate dehydrogenase, LPO and apoptosis as biomarkers of cytotoxicity have recently been used for assessment of ecotoxicological impact of environmental chemicals. Our findings show that these biomarkers may also be used for evaluation of ecotoxicological impact of complex chemical mixture such as fly ash and its leachates.

  2. 46 CFR 108.160 - Vertical ladders.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Construction and Arrangement Means of Escape § 108.160 Vertical ladders. (a) Each vertical ladder must have... vertical fixed ladders may be made of wood. [CGD 73-251, 43 FR 56808, Dec. 4, 1978, as amended by USCG-2002...

  3. 30 CFR 56.11006 - Fixed ladder landings.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Fixed ladder landings. 56.11006 Section 56....11006 Fixed ladder landings. Fixed ladders shall project at least 3 feet above landings, or subtantial handholds shall be provided above the landings. ...

  4. 30 CFR 56.11006 - Fixed ladder landings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fixed ladder landings. 56.11006 Section 56....11006 Fixed ladder landings. Fixed ladders shall project at least 3 feet above landings, or subtantial handholds shall be provided above the landings. ...

  5. 29 CFR 1910.25 - Portable wood ladders.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Walking-Working Surfaces § 1910.25 Portable wood ladders. (a... safety under normal conditions of usage. Other types of special ladders, fruitpicker's ladders...

  6. Walla Walla River Basin Fish Screens Evaluations, 2006 Annual Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chamness, Mickie; Abernethy, Scott; Tunnicliffe, Cherylyn

    2007-01-01

    Pacific Northwest National Laboratory evaluated Gardena Farms, Little Walla Walla, and Garden City/Lowden II Phase II fish screen facilities and provided underwater videography beneath a leaking rubber dam in the Walla Walla River basin in 2006. Evaluations of the fish screen facilities took place in early May 2006, when juvenile salmonids are generally outmigrating. At the Gardena Farms site, extended high river levels caused accumulations of debris and sediment in the forebay. This debris covered parts of the bottom drum seals, which could lead to early deterioration of the seals and drum screen. Approach velocities were excessive at the upstreammore » corners of most of the drums, leading to 14% of the total approach velocities exceeding 0.4 feet per second (ft/s). Consequently, the approach velocities did not meet National Marine Fisheries Service (NMFS) design criteria guidelines for juvenile fish screens. The Little Walla Walla site was found to be in good condition, with all approach, sweep, and bypass velocities within NMFS criteria. Sediment buildup was minor and did not affect the effectiveness of the screens. At Garden City/Lowden II, 94% of approach velocities met NMFS criteria of 0.4 ft/s at any time. Sweep velocities increased toward the fish ladder. The air-burst mechanism appears to keep large debris off the screens, although it does not prevent algae and periphyton from growing on the screen face, especially near the bottom of the screens. In August 2006, the Gardena Farm Irrigation District personnel requested that we look for a leak beneath the inflatable rubber dam at the Garden City/Lowden II site that was preventing water movement through the fish ladder. Using our underwater video equipment, we were able to find a gap in the sheet piling beneath the dam. Erosion of the riverbed was occurring around this gap, allowing water and cobbles to move beneath the dam. The construction engineers and irrigation district staff were able to use the video footage to resolve the problem within a couple weeks. We had hoped to also evaluate the effectiveness of modifications to louvers behind the Nursery Bridge screens when flows were higher than 350 cubic feet per second, (cfs) but were unable to do so. Based on the one measurement made in early 2006 after the modified louvers were set, it appears the modified louvers may help reduce approach velocities. The auxiliary supply water system gates also control water through the screens. Evaluating the effect of different combinations of gate and louver positions on approach velocities through the screens may help identify optimum settings for both at different river discharges.« less

  7. Multimode and multistate ladder oscillator and frequency recognition device

    NASA Technical Reports Server (NTRS)

    Aumann, Herbert M. (Inventor)

    1976-01-01

    A ladder oscillator composed of capacitive and inductive impedances connected together to form a ladder network which has a chosen number N oscillation modes at N different frequencies. Each oscillation mode is characterized by a unique standing wave voltage pattern along the nodes of the ladder oscillator, with the mode in which the ladder oscillator is oscillating being determinable from the amplitudes or phase of the oscillations at the nodes. A logic circuit may be connected to the nodes of the oscillator to compare the phases of selected nodes and thereby determine which mode the oscillator is oscillating in. A ladder oscillator composed of passive capacitive and inductive impedances can be utilized as a frequency recognition device, since the passive ladder oscillator will display the characteristic standing wave patterns if an input signal impressed upon the ladder oscillator is close to one of the mode frequencies of the oscillator. A CL ladder oscillator having series capacitive impedances and shunt inductive impedances can exhibit sustained and autonomous oscillations if active nonlinear devices are connected in parallel with the shunt inductive impedances. The active CL ladder oscillator can be synchronized to input frequencies impressed upon the oscillator, and will continue to oscillate after the input signal has been removed at a mode frequency which is, in general, nearest to the input signal frequency. Autonomous oscillations may also be obtained as desired from the active CL ladder oscillator at the mode frequencies.

  8. Walla Walla River Fish Passage Operations Project : Annual Progress Report October 2007 - September 2008.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bronson, James P.; Duke, Bill; Loffink, Ken

    2008-12-30

    In the late 1990s, the Confederated Tribes of the Umatilla Indian Reservation, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife, along with many other agencies, began implementing fisheries restoration activities in the Walla Walla Basin. An integral part of these efforts is to alleviate the inadequate fish migration conditions in the basin. Migration concerns are being addressed by removing diversion structures, constructing fish passage facilities, implementing minimum instream flow requirements, and providing trap and haul efforts when needed. The objective of the Walla Walla River Fish Passage Operations Project is to increase the survival ofmore » migrating adult and juvenile salmonids in the Walla Walla River basin. The project is responsible for coordinating operation and maintenance of ladders, screen sites, bypasses, trap facilities, and transportation equipment. In addition, the project provides technical input on passage and trapping facility design, operation, and criteria. Operation of the various passage facilities and passage criteria guidelines are outlined in an annual operations plan that the project develops. Beginning in March of 2007, two work elements from the Walla Walla Fish Passage Operations Project were transferred to other projects. The work element Enumeration of Adult Migration at Nursery Bridge Dam is now conducted under the Walla Walla Basin Natural Production Monitoring and Evaluation Project and the work element Provide Transportation Assistance is conducted under the Umatilla Satellite Facilities Operation and Maintenance Project. Details of these activities can be found in those project's respective annual reports.« less

  9. 30 CFR 57.11006 - Fixed ladder landings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fixed ladder landings. 57.11006 Section 57... Escapeways Travelways-Surface and Underground § 57.11006 Fixed ladder landings. Fixed ladders shall project at least 3 feet above landings, or substantial handholds shall be provided above the landings. ...

  10. 30 CFR 57.11006 - Fixed ladder landings.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Fixed ladder landings. 57.11006 Section 57... Escapeways Travelways-Surface and Underground § 57.11006 Fixed ladder landings. Fixed ladders shall project at least 3 feet above landings, or substantial handholds shall be provided above the landings. ...

  11. 46 CFR 108.167 - Weather deck ladders.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Weather deck ladders. 108.167 Section 108.167 Shipping... EQUIPMENT Construction and Arrangement Means of Escape § 108.167 Weather deck ladders. Each unit must have at least one permanent, inclined ladder between each weather deck. Classified Locations ...

  12. 46 CFR 108.167 - Weather deck ladders.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Weather deck ladders. 108.167 Section 108.167 Shipping... EQUIPMENT Construction and Arrangement Means of Escape § 108.167 Weather deck ladders. Each unit must have at least one permanent, inclined ladder between each weather deck. Classified Locations ...

  13. 46 CFR 108.167 - Weather deck ladders.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Weather deck ladders. 108.167 Section 108.167 Shipping... EQUIPMENT Construction and Arrangement Means of Escape § 108.167 Weather deck ladders. Each unit must have at least one permanent, inclined ladder between each weather deck. Classified Locations ...

  14. 46 CFR 108.167 - Weather deck ladders.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Weather deck ladders. 108.167 Section 108.167 Shipping... EQUIPMENT Construction and Arrangement Means of Escape § 108.167 Weather deck ladders. Each unit must have at least one permanent, inclined ladder between each weather deck. Classified Locations ...

  15. 46 CFR 108.167 - Weather deck ladders.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Weather deck ladders. 108.167 Section 108.167 Shipping... EQUIPMENT Construction and Arrangement Means of Escape § 108.167 Weather deck ladders. Each unit must have at least one permanent, inclined ladder between each weather deck. Classified Locations ...

  16. 29 CFR 1910.25 - Portable wood ladders.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 5 2013-07-01 2013-07-01 false Portable wood ladders. 1910.25 Section 1910.25 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Walking-Working Surfaces § 1910.25 Portable wood ladders. (a... for the construction, care, and use of the common types of portable wood ladders, in order to insure...

  17. 29 CFR 1910.25 - Portable wood ladders.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 5 2014-07-01 2014-07-01 false Portable wood ladders. 1910.25 Section 1910.25 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Walking-Working Surfaces § 1910.25 Portable wood ladders. (a... for the construction, care, and use of the common types of portable wood ladders, in order to insure...

  18. 30 CFR 56.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Fixed ladder anchorage and toe clearance. 56.11005 Section 56.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Travelways § 56.11005 Fixed ladder anchorage and toe clearance. Fixed ladders shall be anchored securely and...

  19. 30 CFR 56.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fixed ladder anchorage and toe clearance. 56.11005 Section 56.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Travelways § 56.11005 Fixed ladder anchorage and toe clearance. Fixed ladders shall be anchored securely and...

  20. 30 CFR 56.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Fixed ladder anchorage and toe clearance. 56.11005 Section 56.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Travelways § 56.11005 Fixed ladder anchorage and toe clearance. Fixed ladders shall be anchored securely and...

  1. 30 CFR 56.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Fixed ladder anchorage and toe clearance. 56.11005 Section 56.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Travelways § 56.11005 Fixed ladder anchorage and toe clearance. Fixed ladders shall be anchored securely and...

  2. 30 CFR 56.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Fixed ladder anchorage and toe clearance. 56.11005 Section 56.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Travelways § 56.11005 Fixed ladder anchorage and toe clearance. Fixed ladders shall be anchored securely and...

  3. 29 CFR 1915.72 - Ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...). (b) Construction of portable wood cleated ladders up to 30 feet in length. (1) Wood side rails shall... shall be at least 25/32×33/4 inches in cross section. (c) Construction of portable wood cleated ladders... split side rails, or other faulty or defective construction is prohibited. When ladders with such...

  4. Careers Under Construction: Models for Developing Career Ladders.

    ERIC Educational Resources Information Center

    2003

    This publication describes resources and processes that are a catalyst for discussion and action for local workforce investment partners--employers, training providers, and workers--to plan and implement regional career ladder programs. Section 1 discusses career ladders and uses. Section 2 describes how to build an industry career ladder or…

  5. 46 CFR 190.10-15 - Vertical ladders not accepted.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Vertical ladders not accepted. 190.10-15 Section 190.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Means of Escape § 190.10-15 Vertical ladders not accepted. (a) Vertical ladders...

  6. 5 CFR 335.104 - Eligibility for career ladder promotion.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Eligibility for career ladder promotion... REGULATIONS PROMOTION AND INTERNAL PLACEMENT General Provisions § 335.104 Eligibility for career ladder promotion. No employee shall receive a career ladder promotion unless his or her current rating of record...

  7. Effects of a Novel Fish Transport System on the Health of Adult Fall Chinook Salmon

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Geist, David R.; Colotelo, Alison H.; Linley, Timothy J.

    Movement past hydroelectric dams and related in-river structures has important implications for habitat connectivity and population persistence in migratory fish. A major problem is that many of these structures lack effective fish passage facilities, which can fragment spawning and rearing areas and negatively impact recruitment. While traditional fish passage facilities (e.g., ladders, trap and haul) can effectively enable fish to pass over barriers, their capital or operational costs can be significant. We evaluated the utility of a novel transport device that utilizes a flexible tube with differential internal air pressure to pass fish around in-river barriers. Three treatments and amore » control group were tested. In two of the treatments, adult fall Chinook Salmon nearing maturation were transported through the device via two lengths of tube (12 or 77 m) and their injury, stress, and immune system responses and reproductive function were compared to a third treatment where fish were moved by a standard trap and haul method and also to a control group. We observed no significant differences among the treatment or control groups in post-treatment adult survival, injury or stress. Indicators of immune system response and reproductive readiness were also not significantly different among the four groups. Egg survival was significantly different among the groups, but the differences were highly variable within groups and not consistent with the duration of treatment or degree of handling. Taken together, the results suggest the device did not injure or alter normal physiological functioning of adult fall Chinook Salmon nearing maturation and may provide an effective method for transporting such fish around in-river barriers during their spawning migration. Keywords: Whooshh, transport, in-stream barriers, hydropower« less

  8. Spawning and nursery habitats of neotropical fish species in the tributaries of a regulated river

    USGS Publications Warehouse

    Makrakis, Maristela Cavicchioli; da Silva, Patrícia S.; Makrakis, Sergio; de Lima, Ariane F.; de Assumpção, Lucileine; de Paula, Salete; Miranda, Leandro E.; Dias, João Henrique Pinheiro

    2012-01-01

    This chapter provides information on ontogenetic patterns of neotropical fish species distribution in tributaries (Verde, Pardo, Anhanduí, and Aguapeí rivers) of the Porto Primavera Reservoir, in the heavily dammed Paraná River, Brazil, identifying key spawning and nursery habitats. Samplings were conducted monthly in the main channel of rivers and in marginal lagoons from October through March during three consecutive spawning seasons in 2007-2010. Most species spawn in December especially in Verde River. Main river channels are spawning habitats and marginal lagoons are nursery areas for most fish, mainly for migratory species. The tributaries have high diversity of larvae species: a total of 56 taxa representing 21 families, dominated by Characidae. Sedentary species without parental care are more abundant (45.7%), and many long-distance migratory fish species are present (17.4%). Migrators included Prochilodus lineatus, Rhaphiodon vulpinus, Hemisorubim platyrhynchos, Pimelodus maculatus, Pseudoplatystoma corruscans, Sorubim lima, two threatened migratory species: Salminus brasiliensis and Zungaro jahu, and one endangered migratory species: Brycon orbignyanus. Most of these migratory species are vital to commercial and recreational fishing, and their stocks have decreased drastically in the last decades, attributed to habitat alteration, especially impoundments. The fish ladder at Porto Primavera Dam appears to be playing an important role in re-establishing longitudinal connectivity among critical habitats, allowing ascent to migratory fish species, and thus access to upstream reaches and tributaries. Establishment of Permanent Conservation Units in tributaries can help preserve habitats identified as essential spawning and nursery areas, and can be key to the maintenance and conservation of the fish species in the Paraná River basin.

  9. Subjective Social Status and Health Behaviors Among African Americans

    PubMed Central

    Reitzel, Lorraine R.; Nguyen, Nga; Strong, Larkin L.; Wetter, David W.; McNeill, Lorna H.

    2012-01-01

    Objectives To examine associations of the US and community subjective social status (SSS) ladders with smoking status, at-risk drinking, fruit and vegetable intake, physical activity, and body mass index among 1467 church-going African American adults from a larger cohort study. Methods Regression analyses, adjusted for sociodemographics, examined associations between SSS ladders and health behaviors. Results The SSS-US ladder was significantly associated with fruit and vegetable consumption (p = .007) and physical activity (p = .005). The SSS-community ladder was not significantly associated with any health behaviors. Conclusions Among this sample of African Americans, the SSS-US ladder is more predictive of some health behaviors than is the SSS-community ladder. PMID:22943107

  10. Climbing the Ladder: Experience with Developing a Large Group Genetic Counselor Career Ladder at Children's National Health System.

    PubMed

    Kofman, Laura; Seprish, Mary Beth; Summar, Marshall

    2016-08-01

    Children's National Health System (CNHS) is a not-for-profit pediatric hospital that employs around twenty genetic counselors in a range of specialties, including clinical pediatric, neurology, fetal medicine, research, and laboratory. CNHS lacked a structured system of advancement for their genetic counselors; therefore, a formal career ladder was proposed by the genetic counselors based on years of experience, responsibility, and job performance. This career ladder utilized monetary, academic, and seniority incentives to encourage advancement and continue employment at CNHS. The creation and ultimate approval of the career ladder required direct input from genetic counselors, Department Chairs, and Human Resource personnel. The establishment of a genetic counselor career ladder at CNHS will hopefully benefit the profession of genetic counselors as a whole and allow other facilities to create and maintain their own career ladder to meet the needs of the growing, competitive, field of genetic counseling.

  11. 29 CFR 1926.1053 - Ladders.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... plastic ladder shall sustain at least 3.3 times the maximum intended load. The ability of a ladder to... that each extra-heavy-duty type 1A metal or plastic ladders shall sustain at least 3.3 times the... parapet is cut to permit passage through the parapet; if the parapet is continuous, the access level shall...

  12. Effect of risk ladder format on risk perception in high- and low-numerate individuals.

    PubMed

    Keller, Carmen; Siegrist, Michael; Visschers, Vivianne

    2009-09-01

    Utilizing a random sample from the general population (N= 257), we examined the effect of the radon risk ladder on risk perception, as qualified by respondents' numeracy. The radon risk ladder provides comparative risk information about the radon equivalent of smoking risk. We compared a risk ladder providing smoking risk information with a risk ladder not providing this information. A 2 (numeracy; high, low) x 3 (risk level; high, medium, low) x 2 (smoking risk comparison: with/without) between subjects experimental design was used. A significant (p < 0.045) three-way interaction between format, risk level, and numeracy was identified. Participants with low numeracy skills, as well as participants with high numeracy skills, generally distinguished between low, medium, and high risk levels when the risk ladder with comparative smoking risk information was presented. When the risk ladder without the comparative information about the smoking risk was presented, low-numerate individuals differentiated between risk levels to a much lesser extent than high-numerate individuals did. These results provide empirical evidence that the risk ladder can be a useful tool in enabling people to interpret various risk levels. Additionally, these results allow us to conclude that providing comparative information within a risk ladder is particularly helpful to the understanding of different risk levels by people with low numeracy skills.

  13. Role of Structural Asymmetry in Controlling Drop Spacing in Microfluidic Ladder Networks

    NASA Astrophysics Data System (ADS)

    Wang, William; Maddala, Jeevan; Vanapalli, Siva; Rengasamy, Raghunathan

    2012-02-01

    Manipulation of drop spacing is crucial to many processes in microfluidic devices including drop coalescence, detection and storage. Microfluidic ladder networks ---where two droplet-carrying parallel channels are connected by narrow bypass channels through which the motion of drops is forbidden---have been proposed as a means to control relative separation between pairs of drops. Prior studies in microfluidic ladder networks with vertical bypasses, which possess fore-aft structural symmetry, have revealed that pairs of drops can only undergo reduction in drop spacing at the ladder exit. We investigate the dynamics of drops in microfluidic ladder networks with both vertical and slanted bypasses. Our analytical results indicate that unlike symmetric ladder networks, structural asymmetry introduced by a single slanted bypass can be used to modulate the relative spacing between drops, enabling them to contract, synchronize, expand or even flip at the ladder exit. Our experiments confirm all the behaviors predicted by theory. Numerical analysis further shows that ladders containing several identical bypasses can only linearly transform the input drop spacing. Finally, we find that ladders with specific combinations of vertical and slanted bypasses can generate non-linear transformation of input drop spacing, despite the absence of drop decision-making events at the bypass junctions.

  14. Work-related falls from ladders--a follow-back study of US emergency department cases.

    PubMed

    Lombardi, David A; Smith, Gordon S; Courtney, Theodore K; Brennan, Melanye J; Kim, Jae Young; Perry, Melissa J

    2011-11-01

    Ladder falls comprise 16% of all US workplace fall-related fatalities, and ladder use may be particularly hazardous among older workers. This follow-back study of injured workers from a nationally representative sample of US emergency departments (ED) focused on factors related to ladder falls in three domains of the work environment: work equipment, work practices, and worker-related factors. Risk factors for fractures, the most frequent and severe outcome, were also evaluated. Workers injured from a ladder fall, treated in one of the 65 participating ED in the occupational National Electronic Injury Surveillance System (NEISS) were asked to participate. The questionnaire included worker demographics, injury, ladder and work equipment and environment characteristics, work tasks, and activities. Multivariate logistic regression models estimated odds ratios and 95% confidence intervals of a work-related fracture. Three-hundred and six workers experiencing an injury from an--on average--7.5-foot-fall from a step, extension, or straight ladder were interviewed primarily from construction, installation, maintenance, and repair professions. Injuries were most frequently to the arm, elbow or shoulder; head, neck, or face with diagnoses were primarily fracture, strain, sprain, contusion or abrasion. Workers were most frequently standing or sitting on the ladder while installing, hanging an item, or performing a repair when they fell. Ladder movement was the mechanism in 40% of falls. Environmental conditions played a role in <10% of cases. There was a significant association between fracture risk and fall height while working on the ladder that was also influenced by older work age. This study advances knowledge of falls from ladders to support those who specify means and methods, select equipment, and plan, supervise, or manage the performance of employees working at heights.

  15. Getting Clever with the Sliding Ladder

    ERIC Educational Resources Information Center

    De, Subhranil

    2014-01-01

    The familiar system involving a uniform ladder sliding against a vertical wall and a horizontal floor is considered again. The floor is taken to be smooth and the wall to be possibly rough--a situation where no matter how large the static friction coefficient between the ladder and the wall, the ladder cannot lean at rest and must slide down.…

  16. Quantifying Ladder Fuels: A New Approach Using LiDAR

    Treesearch

    Heather Kramer; Brandon Collins; Maggi Kelly; Scott Stephens

    2014-01-01

    We investigated the relationship between LiDAR and ladder fuels in the northern Sierra Nevada, California USA. Ladder fuels are often targeted in hazardous fuel reduction treatments due to their role in propagating fire from the forest floor to tree crowns. Despite their importance, ladder fuels are difficult to quantify. One common approach is to calculate canopy base...

  17. 29 CFR Appendix A to Subpart X of... - Ladders

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Ladders A Appendix A to Subpart X of Part 1926 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Stairways and Ladders Pt. 1926, Subpt. X, App. A Appendix A to Subpart X of Part 1926—Ladders This appendix serves as a non-mandatory guideline to assist...

  18. 29 CFR Appendix A to Subpart X of... - Ladders

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Ladders A Appendix A to Subpart X of Part 1926 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Stairways and Ladders Pt. 1926, Subpt. X, App. A Appendix A to Subpart X of Part 1926—Ladders This appendix serves as a non-mandatory guideline to assist...

  19. 29 CFR Appendix A to Subpart X of... - Ladders

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Ladders A Appendix A to Subpart X of Part 1926 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Stairways and Ladders Pt. 1926, Subpt. X, App. A Appendix A to Subpart X of Part 1926—Ladders This appendix serves as a non-mandatory guideline to assist...

  20. 29 CFR Appendix A to Subpart X of... - Ladders

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Ladders A Appendix A to Subpart X of Part 1926 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Stairways and Ladders Pt. 1926, Subpt. X, App. A Appendix A to Subpart X of Part 1926—Ladders This appendix serves as a non-mandatory guideline to assist...

  1. 29 CFR Appendix A to Subpart X of... - Ladders

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Ladders A Appendix A to Subpart X of Part 1926 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Stairways and Ladders Pt. 1926, Subpt. X, App. A Appendix A to Subpart X of Part 1926—Ladders This appendix serves as a non-mandatory guideline to assist...

  2. Allowable bending stresses of wood for use in portable wood ladders

    Treesearch

    Fred Werren

    1975-01-01

    A standard for portable wood ladders has been in effect since 1923, and has been revised several times since then. The most recent publication is "American National Standard Safety Standard for Portable Wood Ladders," A14.1-1975, from American National Standards Institute, Inc. Methods of arriving at allowable stresses for wood ladder parts have never been...

  3. Building New Career Ladders in Clerical Occupations: Final Report for the Period July 1, 1974-June 30, 1975.

    ERIC Educational Resources Information Center

    National Council of Negro Women, New York, NY.

    A project by the National Council of Negro Women called "Building New Career Ladders in Clerical Occupations" has five components. Two of these are: (1) development of career ladders on the job; and (2) testing, evaluation, and dissemination. In the career ladder component, 33 companies participated through financial contributions; giving…

  4. Corrosion Control Specialist Career Ladder AFSC 53530, 53550, 53570, and 53690. Occupational Survey Report.

    ERIC Educational Resources Information Center

    Air Force Occupational Measurement Center, Lackland AFB, TX.

    The report describes the results of a detailed occupational survey of the corrosion control career ladder. Responses to a 457-task, time rating inventory from 1,015 personnel (representing 64 percent of the career field) were analyzed to produce seven specific findings and the career ladder structure. The career ladder includes a variety of jobs…

  5. Evaluating risk communication: examining target audience perceptions about four presentation formats for fish consumption health advisory information.

    PubMed

    Connelly, N A; Knuth, B A

    1998-10-01

    Information format can influence the extent to which target audiences understand and respond to risk-related information. This study examined four elements of risk information presentation format. Using printed materials, we examined target audience perceptions about: (a) reading level; (b) use of diagrams vs. text; (c) commanding versus cajoling tone; and (d) use of qualitative vs. quantitative information presented in a risk ladder. We used the risk communication topic of human health concerns related to eating noncommercial Great Lakes fish affected by chemical contaminants. Results from the comparisons of specific communication formats indicated that multiple formats are required to meet the needs of a significant percent of anglers for three of the four format types examined. Advisory text should be reviewed to ensure the reading level is geared to abilities of the target audience. For many audiences, a combination of qualitative and quantitative information, and a combination of diagrams and text may be most effective. For most audiences, a cajoling rather than commanding tone better provides them with the information they need to make a decision about fish consumption. Segmenting audiences regarding information needs and communication formats may help clarify which approaches to take with each audience.

  6. Giant Stark effect in double-stranded porphyrin ladder polymers

    NASA Astrophysics Data System (ADS)

    Pramanik, Anup; Kang, Hong Seok

    2011-03-01

    Using the first-principles calculations, we have investigated the stability and the electronic structure of two types of recently synthesized one-dimensional nanoribbons, i.e., double-stranded zinc(II) porphyrin ladder polymer (LADDER) arrays. First, electronic structure calculations were used to show that the LADDER is a semiconductor. Most importantly, the application of a transverse electric field significantly reduces the band gap of the LADDER, ultimately converting the LADDER to a metal at a field strength of 0.1 V/Å. The giant Stark effect in this case is almost as strong as that in boron nitride nanotubes and nanoribbons. In the presence of an electric field, hole conduction and electronic conduction will occur entirely through spatially separated strands, rendering these materials useful for nanoelectronic devices. Second, the substitution of hydrogen atoms in the porphyrin units or that of zinc ions with other kinds of chemical species is found to increase the binding strength of the LADDER and reduce the band gap.

  7. A balanced intervention ladder: promoting autonomy through public health action.

    PubMed

    Griffiths, P E; West, C

    2015-08-01

    The widely cited Nuffield Council on Bioethics 'Intervention Ladder' structurally embodies the assumption that personal autonomy is maximized by non-intervention. Consequently, the Intervention Ladder encourages an extreme 'negative liberty' view of autonomy. Yet there are several alternative accounts of autonomy that are both arguably superior as accounts of autonomy and better suited to the issues facing public health ethics. We propose to replace the one-sided ladder, which has any intervention coming at a cost to autonomy, with a two-sided 'Balanced Intervention Ladder,' where intervention can either enhance or diminish autonomy. We show that not only the alternative, richer accounts of autonomy but even Mill's classic version of negative liberty puts some interventions on the positive side of the ladder. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  8. Effective career ladders.

    PubMed

    Bryant, B; Rabbitts, D; Shover, J; Torres, M; VanDerHeyden, B; Violand-Jones, S

    1992-01-01

    Motivation, quality improvement, productivity enhancement. These are just some of the benefits of an effective career ladder program. The key term here is effective. It is easy for laboratory personnel to stagnate professionally if they do not have a career ladder program, but it is even easier for them to become frustrated--even cynical--over a program that fails to live up to its expectations to encourage, support, and reward professional advancement. If you have been looking form some ideas to get your own career ladder program off the ground, the following responses from your colleagues may help as CLMR asks: What makes your career ladder program effective?

  9. Dental Laboratory Career Ladder AFS 982X0.

    DTIC Science & Technology

    1982-09-01

    7ADA120 102 AIR FORCE OCCUPATIONAL MEASUREMENT CENTER RANDOLPH AFB TX F/6 Ri9 DENTAL LABORATORY CAREER LADDER AFS 982XO.(U) UNCLASSIFIED NLEEEili E...Eli E~lllllllllEEE EEEEEIIIEEEEEE EIEEEEIIEEEEEE IIIIIIIIIIIIIIlLZ UNITED STATES AIR FORCE 0! DENTAL LABORATORY CAREER LADDER DTlC AFS 982X0 ELEr.L_...LADDER STRUCTURE GROUPS ----------------------------------- 57 APPENDIX B - JOB DESCRIPTIONS FOR BASE AND AREA DENTAL LABORATORY PERSONNEL

  10. Career Ladders and Teacher Incentives: The Utah Experiment. Part II: Case Studies. Final Report: Secretary's Discretionary Program Implementation Grant to Develop Teacher Incentive Structures.

    ERIC Educational Resources Information Center

    Peterson, Ken; Kauchak, Don

    This volume, the second of two reports on development of teacher incentive structures, presents case studies of a career ladder design and teacher evaluation experiment in four Utah school districts. Case studies examined relationships among career ladder features, process variables, and career ladder effectiveness, which is defined in terms of…

  11. A millimeter-wave tunneLadder TWT

    NASA Technical Reports Server (NTRS)

    Jacquez, A.; Karp, A.; Wilson, D.; Scott, A.

    1988-01-01

    A millimeter wave traveling wave tube was developed using a dispersive, high impedance forward interaction structure based on a ladder, with non-space harmonic interaction, for a tube with high gain per unit length and high efficiency. The TunneLadder interaction structure combines ladder properties modified to accommodate Pierce gun beam optics in a radially magnetized permanent magnet focusing structure. The development involved the fabrication of chemically milled, shaped ladders diffusion brazed to diamond cubes which are in turn active-diffusion brazed to each ridge of a doubly ridged waveguide. Cold test data are presented, representing the omega-beta and impedance characteristics of the modified ladder circuit. These results were used in small and large signal computer programs to predict TWT gain and efficiency. Actual data from tested tubes verify the predicted performance while providing broader bandwidth than expected.

  12. Use of portable ladders - field observations and self-reported safety performance in the cable TV industry.

    PubMed

    Chang, Wen-Ruey; Huang, Yueng-Hsiang; Brunette, Christopher; Lee, Jin

    2017-11-01

    Portable ladders incidents remain a major cause of falls from heights. This study reported field observations of environments, work conditions and safety behaviour involving portable ladders and their correlations with self-reported safety performance. Seventy-five professional installers of a company in the cable and other pay TV industry were observed for 320 ladder usages at their worksites. The participants also filled out a questionnaire to measure self-reported safety performance. Proper setup on slippery surfaces, correct method for ladder inclination setup and ladder secured at the bottom had the lowest compliance with best practices and training guidelines. The observation compliance score was found to have significant correlation with straight ladder inclined angle (Pearson's r = 0.23, p < 0.0002) and employees' self-reported safety participation (r = 0.29, p < 0.01). The results provide a broad perspective on employees' safety compliance and identify areas for improving safety behaviours. Practitioner Summary: A checklist was used while observing professional installers of a cable company for portable ladder usage at their worksites. Items that had the lowest compliance with best practices and training guidelines were identified. The results provide a broad perspective on employees' safety compliance and identify areas for improving safety behaviours.

  13. The reconstructive microsurgery ladder in orthopaedics.

    PubMed

    Tintle, Scott M; Levin, L Scott

    2013-03-01

    Since the advent of the operating microscope by Julius Jacobson in 1960, reconstructive microsurgery has become an integral part of extremity reconstruction and orthopaedics. During World War I, with the influx of severe extremity trauma Harold Gillies introduced the concept of the reconstructive ladder for wound closure. The concept of the reconstructive ladder goes from simple to complex means of attaining wound closure. Over the last half century microsurgery has continued to evolve and progress. We now have a microsurgical reconstructive ladder. The microsurgical reconstruction ladder is based upon the early work on revascularization and replantation extending through the procedures that are described in this article. Copyright © 2013. Published by Elsevier Ltd.

  14. Post-release behavior and movement patterns of Chinook salmon (Oncorhynchus tshawytscha) and coho salmon (Oncorhynchus kisutch) after capture using alternative commercial fish gear, lower Columbia River, Washington and Oregon, 2013

    USGS Publications Warehouse

    Liedtke, Theresa L.; Kock, Tobias J.; Evans, Scott D.; Hansen, Gabriel S.; Rondorf, Dennis W.

    2014-01-01

    In 2011 and 2012, WDFW conducted post-release mortality studies of steelhead (Oncorhynchus mykiss), Chinook salmon (Oncorhynchus tshawytscha), and coho salmon (Oncorhynchus kisutch) that were captured using beach or purse seines. These studies were comprised of two groups of fish tagged with passive integrated transponder tags (PIT tags): (1) treatment fish that were captured by one of the gear types 9–25 river kilometers (rkm) downstream of Bonneville Dam (rkm 234); and (2) control fish that were captured at the Adult Fish Facility near the Washington shore fish ladder at Bonneville Dam, and then transported and released 8 rkm downstream of the Bonneville Dam. Fish were confirmed to have survived if they moved upstream and were detected on PIT-tag antennas at or upstream of Bonneville Dam, were recovered at hatcheries or at the dam, or were captured by commercial or sport fishers. Post-release survival estimates were higher for steelhead (89–98 percent) than for Chinook salmon and coho salmon (50–90 percent; Washington Department of Fish and Wildlife, unpub. data, 2014). However, some Chinook salmon and coho salmon return to hatcheries, or spawn in the mainstem Columbia River and in tributaries downstream of Bonneville Dam. The proportion of Chinook salmon and coho salmon in the treatment group that were destined for areas downstream of Bonneville Dam likely was higher than in the control group because the control fish were collected as they were attempting to pass the dam. If this assertion was true, mortality would have been overestimated in these studies, so WDFW developed a study plan to determine the post-release movements and intended location of Chinook salmon and coho salmon collected with beach and purse seines in the lower Columbia River.

  15. Topological phases in frustrated synthetic ladders with an odd number of legs

    NASA Astrophysics Data System (ADS)

    Barbarino, Simone; Dalmonte, Marcello; Fazio, Rosario; Santoro, Giuseppe E.

    2018-01-01

    The realization of the Hofstadter model in a strongly anisotropic ladder geometry has now become possible in one-dimensional optical lattices with a synthetic dimension. In this work, we show how the Hofstadter Hamiltonian in such ladder configurations hosts a topological phase of matter which is radically different from its two-dimensional counterpart. This topological phase stems directly from the hybrid nature of the ladder geometry and is protected by a properly defined inversion symmetry. We start our analysis by considering the paradigmatic case of a three-leg ladder which supports a topological phase exhibiting the typical features of topological states in one dimension: robust fermionic edge modes, a degenerate entanglement spectrum, and a nonzero Zak phase; then, we generalize our findings—addressable in the state-of-the-art cold-atom experiments—to ladders with a higher number of legs.

  16. Ladder operators for the Klein-Gordon equation with a scalar curvature term

    NASA Astrophysics Data System (ADS)

    Mück, Wolfgang

    2018-01-01

    Recently, Cardoso, Houri and Kimura constructed generalized ladder operators for massive Klein-Gordon scalar fields in space-times with conformal symmetry. Their construction requires a closed conformal Killing vector, which is also an eigenvector of the Ricci tensor. Here, a similar procedure is used to construct generalized ladder operators for the Klein-Gordon equation with a scalar curvature term. It is proven that a ladder operator requires the existence of a conformal Killing vector, which must satisfy an additional property. This property is necessary and sufficient for the construction of a ladder operator. For maximally symmetric space-times, the results are equivalent to those of Cardoso, Houri and Kimura.

  17. A clinical ladder for occupational health nurses.

    PubMed

    Lang, Yolanda C

    2010-06-01

    Occupational health nurses must have a growing, expanding knowledge base to remain current in practice. The American Board for Occupational Health Nurses, Inc. encourages advancement with the availability of certification examinations. Health care centers support clinical advancement programs for bedside nurses. Nurses who continue their education either through a degree program or via continuing education or certification advance up the clinical ladder, receiving a higher salary, recognition from their peers, and perhaps even financial assistance to continue climbing, yet occupational health nurses do not have their own clinical advancement ladder. This article examines the steps necessary to develop a clinical ladder and presents a clinical ladder specific to occupational health nursing developed by the author. Copyright 2010, SLACK Incorporated.

  18. Evaluation through research of a three-track career ladder program for registered nurses.

    PubMed

    Korman, Carol; Eliades, Aris Beoglos

    2010-01-01

    A descriptive study design was employed to survey registered nurse participants in a career ladder program comprising of three tracks: clinical, education, and management. Findings indicate that participation allows nurses of varying education preparation and roles to demonstrate professional development. Implications for staff development include efficacy of the online survey technique, provision of a reliable tool to evaluate a career ladder, and evaluation of a career ladder that includes the staff development educator.

  19. 29 CFR 1910.27 - Fixed ladders.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Walking-Working Surfaces § 1910.27 Fixed ladders. (a) Design... fraction thereof, except that, where no cage, well, or ladder safety device is provided, landing platforms...

  20. Instabilities of coupled Cu2O5 ladders

    NASA Astrophysics Data System (ADS)

    Schuetz, Florian; Marston, Brad

    2008-03-01

    The spin-ladder compound Sr14-xCaxCu24O41 has a complex phase diagram including charge-density-wave order as well as unconventional superconductivity under high pressure. Due to its quasi-one-dimensional natureootnotetextS. Lee, J. B. Marston, J. O. Fjaerestad, Phys. Rev. B 72, 075126. fundamental questions about the high-Tc cuprates might be more easily addressed in this context. However, due to the spatial proximity of neighboring ladders inter-ladder Coulomb repulsion as well as hopping between ladders might still be important. Using the functional renormalization groupootnotetextM. Salmhofer and C. Honerkamp, Prog. Theor. Physics 105, 1 (2001). and an analysis of generalized susceptibilities ootnotetextD. Zanchi and H. J. Schulz, Phys. Rev. B 61, 13609 (2000); C. J. Halboth and W. Metzner, Phys. Rev. Lett. 85, 5162 (2000)., we study a model of coupled Cu2O5 ladders ootnotetextK. Wohlfeld, A. M. Oles, and G. A. Sawatzky, Phys. Rev. B 75, 180501(R) (2007).. We investigate instabilities towards charge, spin, and pairing order as a function of hole doping, inter-ladder hopping, and interaction strength starting from experimentally relevant hopping parametersootnotetextT. F. A. Müller, et al., Phys. Rev. B 57, R12655 (1998)..

  1. Walla Walla River Fish Passage Operations Program, 2000-2001 Annual Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zimmerman, Brian C.; Duke, Bill B.

    2004-02-01

    In the late 1990's, the Confederated Tribes of the Umatilla Indian Reservation, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife, along with many other agencies, began implementing fisheries restoration activities in the Walla Walla Basin. An integral part of these efforts is to alleviate the inadequate migration conditions in the basin. The migration concerns are being addressed by removing diversion structures, constructing fish passage facilities, implementing minimum instream flow measures, and initiating trap and haul efforts. The objective of the Walla Walla River Fish Passage Operations Project is to increase the survival of migrating adultmore » and juvenile salmonids in the basin. The project is responsible for coordinating operation and maintenance of ladders, screen sites, bypasses, trap facilities, and transportation equipment. In addition, the project provides technical input on passage criteria and passage and trapping facility design and operation. Operation of the various passage facilities and passage criteria guidelines are outlined in an annual operations plan that the project develops. During the 2000-2001 project year, there were 624 summer steelhead (Oncorhynchus mykiss), 24 bull trout (Salvelinus confluentus), and 47 spring chinook (O. tshawytscha) counted at the Nursery Bridge Dam adult trap between December 27, 2000 and June 7, 2001. The Little Walla Walla River juvenile trap was not operated this year. The project transported 1600 adult spring chinook from Ringold Springs Hatchery to the South Fork Walla Walla Brood Holding Facility and outplanted 1156 for natural spawning in the basin. The project also provided equipment for transportation of juveniles captured during the construction fish salvage at Nursery Bridge Dam.« less

  2. Electrical burn injuries of workers using portable aluminium ladders near overhead power lines.

    PubMed

    Moghtader, J C; Himel, H N; Demun, E M; Bellian, K T; Edlich, R F

    1993-10-01

    The use of aluminium ladders around high voltage power lines has resulted in a significant number of electrical injuries and electrocutions. Workers often misjudge wire distances or lose control of fully extended ladders, thereby exposing themselves to electrocution hazard. High-voltage electrical burns of two workers using an aluminium ladder that contacted a high voltage power line are reported. The circumstances surrounding the injury, the clinical management of the case, and the methods of prevention are presented and discussed.

  3. Stennis acquires new ladder truck

    NASA Image and Video Library

    2009-10-20

    The Stennis Space Center Fire Department added to its fire-fighting capabilities with acquisition of a new emergency response vehicle, Ladder-1, for use on-site. The E-One HP78 Aerial Truck is a combination aerial ladder and fire suppression unit and is designed with the latest safety technology. Featuring a 78-foot ladder and a pumping capability of 1,500 gallons per minute, the new truck provides firefighters with a tremendous rescue and fire suppression tool, Stennis Fire Chief Clark Smith said.

  4. Understanding phylogenies in biology: the influence of a Gestalt Perceptual Principle.

    PubMed

    Novick, Laura R; Catley, Kefyn M

    2007-12-01

    Cladograms, hierarchical diagrams depicting evolutionary histories among (groups of) species, are commonly drawn in 2 informationally equivalent formats--tree and ladder. The authors hypothesize that these formats are not computationally equivalent because the Gestalt principle of good continuation obscures the hierarchical structure of ladders. Experimental results confirmed that university students (N = 44) prefer to subdivide ladders in accordance with good continuation rather than with the underlying hierarchical structure. Two subsequent experiments (N = 164) investigated cladogram understanding by examining students' ability to translate between formats (e.g., from tree to ladder). As predicted, students had greater difficulty understanding ladders than trees. This effect was larger for students with weaker backgrounds in biology. These results have important implications for evolution education reform.

  5. Effects of ladder parameters on asymmetric patterns of force exertion during below-knee amputees climbing ladders.

    PubMed

    Li, Weidong; Li, Shiqi; Fu, Yan; Chen, Jacon

    2017-03-01

    Different from walking, ladder climbing requires four-limb coordination and more energy exertion for below-knee amputees (BKAs). We hypothesized that functional deficiency of a disabled limb shall be compensated by the other three intact limbs, showing an asymmetry pattern among limbs. Hand and foot forces of six below-knee amputees and six able-bodied people were collected. Hand, foot and hand/foot sum force variances between groups (non-BKA, intact side and prosthetic side) were carefully examined. Our hypothesis was validated that there is asymmetry between prosthetic and intact side. Results further showed that the ipsilateral hand of the prosthetic leg is stronger than the hand on the intact side, compensating weakness of the prosthetic leg. Effects of ladder rung separations and ladder slant on asymmetric force distribution of BKAs were evaluated, indicating that rung separation has a more significant interactive effect on hand/foot force of BKAs than ladder slant.

  6. Adaptation of a ladder beam walking task to assess locomotor recovery in mice following spinal cord injury.

    PubMed

    Cummings, Brian J; Engesser-Cesar, Christie; Cadena, Gilbert; Anderson, Aileen J

    2007-02-27

    Locomotor impairments after spinal cord injury (SCI) are often assessed using open-field rating scales. These tasks have the advantage of spanning the range from complete paralysis to normal walking; however, they lack sensitivity at specific levels of recovery. Additionally, most supplemental assessments were developed in rats, not mice. For example, the horizontal ladder beam has been used to measure recovery in the rat after SCI. This parametric task results in a videotaped archival record of the event, is easily administered, and is unambiguously scored. Although a ladder beam apparatus for mice is available, its use in the assessment of recovery in SCI mice is rare, possibly because normative data for uninjured mice and the type of step misplacements injured mice exhibit is lacking. We report the development of a modified ladder beam instrument and scoring system to measure hindlimb recovery in vertebral T9 contusion spinal cord injured mice. The mouse ladder beam allows for the use of standard parametric statistical tests to assess locomotor recovery. Ladder beam performance is consistent across four strains of mice, there are no sex differences, and inter-rater reliability between observers is high. The ladder beam score is proportional to injury severity and can be used to easily separate mice capable of weight-supported stance up to mice with consistent forelimb to hindlimb coordination. Critically, horizontal ladder beam testing discriminates between mice that score identically in terms of stepping frequency in open-field testing.

  7. Adaptation of a ladder beam walking task to assess locomotor recovery in mice following spinal cord injury

    PubMed Central

    Cummings, Brian J.; Engesser-Cesar, Christie; Anderson, Aileen J.

    2007-01-01

    Locomotor impairments after spinal cord injury (SCI) are often assessed using open-field rating scales. These tasks have the advantage of spanning the range from complete paralysis to normal walking; however, they lack sensitivity at specific levels of recovery. Additionally, most supplemental assessments were developed in rats, not mice. For example, the horizontal ladder beam has been used to measure recovery in the rat after SCI. This parametric task results in a videotaped archival record of the event, is easily administered, and is unambiguously scored. Although a ladder beam apparatus for mice is available, its use in the assessment of recovery in SCI mice is rare, possibly because normative data for uninjured mice and the type of step misplacements injured mice exhibit is lacking. We report the development of a modified ladder beam instrument and scoring system to measure hindlimb recovery in vertebral T9 contusion spinal cord injured mice. The mouse ladder beam allows for the use of standard parametric statistical tests to assess locomotor recovery. Ladder beam performance is consistent across four strains of mice, there are no sex differences, and inter-rater reliability between observers is high. The ladder beam score is proportional to injury severity and can be used to easily separate mice capable of weight-supported stance up to mice with consistent forelimb to hindlimb coordination. Critically, horizontal ladder beam testing discriminates between mice that score identically in terms of stepping frequency in open-field testing. PMID:17197044

  8. Designing and Implementing Performance-Based Career Ladder Plans.

    ERIC Educational Resources Information Center

    Hawley, Willis D.

    1985-01-01

    Reviews the factors that any teacher motivation plan must incorporate to be effective and outlines 11 principles that should be followed in designing career ladder plans to meet teacher needs, increase teacher competence, and facilitate effective instruction. Warns against potential pitfalls in career ladder plans. (PGD)

  9. 30 CFR 57.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Fixed ladder anchorage and toe clearance. 57.11005 Section 57.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... MINES Travelways and Escapeways Travelways-Surface and Underground § 57.11005 Fixed ladder anchorage and...

  10. 30 CFR 57.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fixed ladder anchorage and toe clearance. 57.11005 Section 57.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... MINES Travelways and Escapeways Travelways-Surface and Underground § 57.11005 Fixed ladder anchorage and...

  11. 30 CFR 57.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Fixed ladder anchorage and toe clearance. 57.11005 Section 57.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... MINES Travelways and Escapeways Travelways-Surface and Underground § 57.11005 Fixed ladder anchorage and...

  12. 30 CFR 57.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Fixed ladder anchorage and toe clearance. 57.11005 Section 57.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... MINES Travelways and Escapeways Travelways-Surface and Underground § 57.11005 Fixed ladder anchorage and...

  13. 30 CFR 57.11005 - Fixed ladder anchorage and toe clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Fixed ladder anchorage and toe clearance. 57.11005 Section 57.11005 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... MINES Travelways and Escapeways Travelways-Surface and Underground § 57.11005 Fixed ladder anchorage and...

  14. 29 CFR 1910.29 - Manually propelled mobile ladder stands and scaffolds (towers).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... (stress grade) construction grade lumber or equivalent. (vi) All scaffold work levels 10 feet or higher... (towers). 1910.29 Section 1910.29 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND..., construction, and use of mobile work platforms (including ladder stands but not including aerial ladders) and...

  15. 29 CFR 1910.29 - Manually propelled mobile ladder stands and scaffolds (towers).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... (stress grade) construction grade lumber or equivalent. (vi) All scaffold work levels 10 feet or higher... (towers). 1910.29 Section 1910.29 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND..., construction, and use of mobile work platforms (including ladder stands but not including aerial ladders) and...

  16. 29 CFR 1910.29 - Manually propelled mobile ladder stands and scaffolds (towers).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... (stress grade) construction grade lumber or equivalent. (vi) All scaffold work levels 10 feet or higher... (towers). 1910.29 Section 1910.29 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND..., construction, and use of mobile work platforms (including ladder stands but not including aerial ladders) and...

  17. 29 CFR 1910.29 - Manually propelled mobile ladder stands and scaffolds (towers).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... (stress grade) construction grade lumber or equivalent. (vi) All scaffold work levels 10 feet or higher... (towers). 1910.29 Section 1910.29 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND..., construction, and use of mobile work platforms (including ladder stands but not including aerial ladders) and...

  18. 29 CFR 1910.29 - Manually propelled mobile ladder stands and scaffolds (towers).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... (stress grade) construction grade lumber or equivalent. (vi) All scaffold work levels 10 feet or higher... (towers). 1910.29 Section 1910.29 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND..., construction, and use of mobile work platforms (including ladder stands but not including aerial ladders) and...

  19. 46 CFR 163.003-13 - Construction.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... that can be used for attaching additional ladder sections. (c) Steps. Pilot ladder steps must meet the... instead of the orange color required under paragraph (c)(8) of this section, and must have the special.... A pilot ladder must not have splinters, burrs, sharp edges, corners, projections, or other defects...

  20. Understanding the Behaviour of Infinite Ladder Circuits

    ERIC Educational Resources Information Center

    Ucak, C.; Yegin, K.

    2008-01-01

    Infinite ladder circuits are often encountered in undergraduate electrical engineering and physics curricula when dealing with series and parallel combination of impedances, as a part of filter design or wave propagation on transmission lines. The input impedance of such infinite ladder circuits is derived by assuming that the input impedance does…

  1. 29 CFR 1926.1053 - Ladders.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Stairways and Ladders § 1926.1053 Ladders. Link to an... structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split..., such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, or...

  2. 29 CFR 1926.1053 - Ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... spreader or locking device shall be provided on each stepladder to hold the front and back sections in an... ascend or descend without continually having to hold, push or pull any part of the device, leaving both... degrees from the horizontal, as measured to the back side of the ladder. (6) Ladders shall be used only on...

  3. Discussing Laddering Application by the Means-End Chain Theory

    ERIC Educational Resources Information Center

    Veludo-de-Oliveira, Tania Modesto; Ikeda, Ana Akemi; Campomar, Marcos Cortez

    2006-01-01

    This article aims at analyzing laddering as a technique of qualitative research, emphasizing the procedures for data collection, analysis and interpretation, and its main limitations as well. "Laddering refers to an in-depth, one-on-one interviewing technique used to develop an understanding of how consumers translate the attributes of products…

  4. Perspective on rainbow-ladder truncation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Eichmann, G.; Institut fuer Physik, Karl-Franzens-Universitaet Graz, A-8010 Graz; Alkofer, R.

    2008-04-15

    Prima facie the systematic implementation of corrections to the rainbow-ladder truncation of QCD's Dyson-Schwinger equations will uniformly reduce in magnitude those calculated mass-dimensioned results for pseudoscalar and vector meson properties that are not tightly constrained by symmetries. The aim and interpretation of studies employing rainbow-ladder truncation are reconsidered in this light.

  5. Modeling the Sliding/Falling Ladder Paradox

    ERIC Educational Resources Information Center

    Fox, William P.; Fox, James B.

    2003-01-01

    Recently we were presented with an interesting twist to the sliding ladder problem viewed in the related rates section of most calculus textbooks. Our problem concerning a sliding ladder that eventually hits the ground. At first, those attempting this problem fell into the calculus trap using only related rates. Previous work for this problem…

  6. 46 CFR 163.002-5 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... load means the sum of the weights of— (1) The rigid ladder or lift platform, the suspension cables (if... persons capacity of the hoist; (c) Lift height means the distance from the lowest step of the pilot ladder... (2) If the hoist does not have suspension cables, the ladder or lift platform is in its lowest...

  7. 46 CFR 163.002-21 - Approval tests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... must not break or crack during these tests. (2) Platform strength. If the pilot hoist has a lift... deck interlock must prevent movement of the ladder or lift platform when the lever is activated. (4... of the hoist is placed on its ladder or lift platform. The ladder or lift platform is repeatedly...

  8. 46 CFR 163.002-5 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... load means the sum of the weights of— (1) The rigid ladder or lift platform, the suspension cables (if... persons capacity of the hoist; (c) Lift height means the distance from the lowest step of the pilot ladder... (2) If the hoist does not have suspension cables, the ladder or lift platform is in its lowest...

  9. Teacher Career Ladders in Utah: Perspectives on Early Stages.

    ERIC Educational Resources Information Center

    Peterson, Ken, Ed.; And Others

    The status of teacher career ladders in Utah is discussed from five different perspectives. Jim Wilson, representing the Legislative Research Analyst's Office and General Counsel of the Legislature, speaks about legislative intent from the past year and what legislators thought would happen and wanted to happen regarding career ladder bills which…

  10. 49 CFR 214.519 - Floors, decks, stairs, and ladders of on-track roadway maintenance machines.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... roadway maintenance machines. 214.519 Section 214.519 Transportation Other Regulations Relating to... SAFETY On-Track Roadway Maintenance Machines and Hi-Rail Vehicles § 214.519 Floors, decks, stairs, and ladders of on-track roadway maintenance machines. Floors, decks, stairs, and ladders of on-track roadway...

  11. 49 CFR 214.519 - Floors, decks, stairs, and ladders of on-track roadway maintenance machines.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... roadway maintenance machines. 214.519 Section 214.519 Transportation Other Regulations Relating to... SAFETY On-Track Roadway Maintenance Machines and Hi-Rail Vehicles § 214.519 Floors, decks, stairs, and ladders of on-track roadway maintenance machines. Floors, decks, stairs, and ladders of on-track roadway...

  12. Perspective on rainbow-ladder truncation

    NASA Astrophysics Data System (ADS)

    Eichmann, G.; Alkofer, R.; Cloët, I. C.; Krassnigg, A.; Roberts, C. D.

    2008-04-01

    Prima facie the systematic implementation of corrections to the rainbow-ladder truncation of QCD's Dyson-Schwinger equations will uniformly reduce in magnitude those calculated mass-dimensioned results for pseudoscalar and vector meson properties that are not tightly constrained by symmetries. The aim and interpretation of studies employing rainbow-ladder truncation are reconsidered in this light.

  13. 77 FR 15839 - Culturally Significant Objects Imported for Exhibition Determinations: “Joan Miró: the Ladder of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-16

    ... DEPARTMENT OF STATE [Public Notice 7827] Culturally Significant Objects Imported for Exhibition Determinations: ``Joan Mir[oacute]: the Ladder of Escape'' SUMMARY: Notice is hereby given of the following... exhibition ``Joan Mir[oacute]: the Ladder of Escape,'' imported from abroad for temporary exhibition within...

  14. The pPSU Plasmids for Generating DNA Molecular Weight Markers.

    PubMed

    Henrici, Ryan C; Pecen, Turner J; Johnston, James L; Tan, Song

    2017-05-26

    Visualizing nucleic acids by gel electrophoresis is one of the most common techniques in molecular biology, and reference molecular weight markers or ladders are commonly used for size estimation. We have created the pPSU1 & pPSU2 pair of molecular weight marker plasmids which produce both 100 bp and 1 kb DNA ladders when digested with two common restriction enzymes. The 100 bp ladder fragments have been optimized to migrate appropriately on both agarose and native polyacrylamide, unlike many currently available DNA ladders. Sufficient plasmid DNA can be isolated from 100 ml E. coli cultures for the two plasmids to produce 100 bp or 1 kb ladders for 1000 gels. As such, the pPSU1 and pPSU2 plasmids provide reference fragments from 50 to 10000 bp at a fraction of the cost of commercial DNA ladders. The pPSU1 and pPSU2 plasmids are available without licensing restrictions to nonprofit academic users, affording freely available high-quality, low-cost molecular weight standards for molecular biology applications.

  15. A millimeter-wave tunneladder TWT

    NASA Technical Reports Server (NTRS)

    Wilson, D.

    1988-01-01

    A millimeter-wave traveling wave tube (TWT) was developed using a dispersive, high-impedance forward wave interaction structure based on a ladder, with non-space-harmonic interaction, for a tube with high gain per inch and high efficiency. The 'TunneLadder' interaction structure combines ladder properties modified to accommodate Pierce gun beam optics in a radially magnetized PM focusing structure. The development involved the fabrication of chemically milled, shaped ladders diffusion brazed to diamond cubes which are in turn active diffusion brazed to each ridge of a doubly ridged waveguide. Cold-test data, representing the (omega)(beta) and and impedance characteristics of the modified ladder circuit, were used in small and large-signal computer programs to predict TWT gain and efficiency. The structural design emphasizes ruggedness and reliability. Actual data from tested tubes verify the predicted performance while providing broader bandwidth than expected.

  16. Edge currents in frustrated Josephson junction ladders

    NASA Astrophysics Data System (ADS)

    Marques, A. M.; Santos, F. D. R.; Dias, R. G.

    2016-09-01

    We present a numerical study of quasi-1D frustrated Josephson junction ladders with diagonal couplings and open boundary conditions, in the large capacitance limit. We derive a correspondence between the energy of this Josephson junction ladder and the expectation value of the Hamiltonian of an analogous tight-binding model, and show how the overall superconducting state of the chain is equivalent to the minimum energy state of the tight-binding model in the subspace of one-particle states with uniform density. To satisfy the constraint of uniform density, the superconducting state of the ladder is written as a linear combination of the allowed k-states of the tight-binding model with open boundaries. Above a critical value of the parameter t (ratio between the intra-rung and inter-rung Josephson couplings) the ladder spontaneously develops currents at the edges, which spread to the bulk as t is increased until complete coverage is reached. Above a certain value of t, which varies with ladder size (t = 1 for an infinite-sized ladder), the edge currents are destroyed. The value t = 1 corresponds, in the tight-binding model, to the opening of a gap between two bands. We argue that the disappearance of the edge currents with this gap opening is not coincidental, and that this points to a topological origin for these edge current states.

  17. Dissipation, Voltage Profile and Levy Dragon in a Special Ladder Network

    ERIC Educational Resources Information Center

    Ucak, C.

    2009-01-01

    A ladder network constructed by an elementary two-terminal network consisting of a parallel resistor-inductor block in series with a parallel resistor-capacitor block sometimes is said to have a non-dispersive dissipative response. This special ladder network is created iteratively by replacing the elementary two-terminal network in place of the…

  18. Getting to the Bottom of a Ladder Problem

    ERIC Educational Resources Information Center

    McCartney, Mark

    2002-01-01

    In this paper, the author introduces a simple problem relating to a pair of ladders. A mathematical model of the problem produces an equation which can be solved in a number of ways using mathematics appropriate to "A" level students or first year undergraduates. The author concludes that the ladder problem can be used in class to develop and…

  19. 46 CFR 163.002-13 - Construction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... a rigid ladder or a lift platform on which a person being raised or lowered may stand. (b) Spreader. Each hoist must have a spreader or other device to prevent twisting of its ladder or lift platform. If.... The rigid ladder or lift platform on a pilot hoist and the ends of its spreader (if a spreader is...

  20. 46 CFR 163.002-13 - Construction.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... a rigid ladder or a lift platform on which a person being raised or lowered may stand. (b) Spreader. Each hoist must have a spreader or other device to prevent twisting of its ladder or lift platform. If.... The rigid ladder or lift platform on a pilot hoist and the ends of its spreader (if a spreader is...

  1. Revisiting the Ladder on a Wall Problem

    ERIC Educational Resources Information Center

    Salu, Yehuda

    2011-01-01

    The problem of a ladder leaning on a wall has been a staple of introductory physics for years. It is discussed in numerous physics textbooks and in journals. Now, it even has an Internet presence. Postings from students seek help for "ladder on a wall" problems. A quick review of those postings would show that they all deal with frictionless…

  2. Combining a clinical ladder and performance appraisal system as a reward strategy: the EXCEL clinical ladder program.

    PubMed

    Moe, J K; Lonowski, L R; Yancer, D A

    1994-09-01

    In response to the dramatic changes occurring in health care today and a desire to reward professional nurses for clinical behaviors that would be valued in the future, Bergan Mercy Medical Center (BMMC) has developed an innovative clinical ladder/performance appraisal system. The BMMC EXCEL Clinical Ladder program, which is based on the developmental model of Patricia Benner, is a competency-based system that uniquely combines a clinical ladder and performance appraisal system. The program is clinically focused and contains optional components in which registered nurses (RNs) can receive additional credit for participation in professional growth and leadership activities. Nurses document examples of their practice through nursing narratives that describe actual clinical situations. The development and implementation processes, challenges encountered, and recommendations for alternative approaches to the implementation of such a unique system are discussed.

  3. Experimental ladder proof of Hardy's nonlocality for high-dimensional quantum systems

    NASA Astrophysics Data System (ADS)

    Chen, Lixiang; Zhang, Wuhong; Wu, Ziwen; Wang, Jikang; Fickler, Robert; Karimi, Ebrahim

    2017-08-01

    Recent years have witnessed a rapidly growing interest in high-dimensional quantum entanglement for fundamental studies as well as towards novel applications. Therefore, the ability to verify entanglement between physical qudits, d -dimensional quantum systems, is of crucial importance. To show nonclassicality, Hardy's paradox represents "the best version of Bell's theorem" without using inequalities. However, so far it has only been tested experimentally for bidimensional vector spaces. Here, we formulate a theoretical framework to demonstrate the ladder proof of Hardy's paradox for arbitrary high-dimensional systems. Furthermore, we experimentally demonstrate the ladder proof by taking advantage of the orbital angular momentum of high-dimensionally entangled photon pairs. We perform the ladder proof of Hardy's paradox for dimensions 3 and 4, both with the ladder up to the third step. Our paper paves the way towards a deeper understanding of the nature of high-dimensionally entangled quantum states and may find applications in quantum information science.

  4. Estimating ladder fuels: a new approach combining field photography with LiDAR

    Treesearch

    Heather Kramer; Brandon Collins; Frank Lake; Marek Jakubowski; Scott Stephens; Maggi Kelly

    2016-01-01

    Forests historically associated with frequent fire have changed dramatically due to fire suppression and past harvesting over the last century. The buildup of ladder fuels, which carry fire from the surface of the forest floor to tree crowns, is one of the critical changes, and it has contributed to uncharacteristically large and severe fires. The abundance of ladder...

  5. Utah Teacher Evaluation Project: The Park City Career Ladder Design. Final Report: Secretary's Discretionary Program, Planning Grant to Develop Teacher Incentive Programs.

    ERIC Educational Resources Information Center

    Peterson, Ken; And Others

    The Park City School District (Utah) career ladder design provides a system in which teachers are positioned and paid according to successful performance and differentiation of responsibilities. It includes an evaluation system to differentiate among teachers. The career ladder design presents a number of innovations; for example, excellent…

  6. The Missouri Career Development and Teacher Excellence Plan: An Initial Study of Missouri's Career Ladder Program. A Technical Report.

    ERIC Educational Resources Information Center

    Schofer, Richard C.; And Others

    The Missouri Plan provides for direct participation of teachers in the planning, development, and implementation of the district career ladder plan. This study analyzed the appropriateness of the Missouri teacher incentive plan. In particular, the study sought to determine why districts did or did not choose to implement career ladder programs;…

  7. Polarization-dependent infrared reflectivity study of Sr 2.5 Ca 11.5 Cu 24 O 41 under pressure: Charge dynamics, charge distribution, and anisotropy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Frank, S.; Huber, A.; Ammerahl, U.

    2014-12-18

    We present a polarization-dependent infrared reflectivity study of the spin-ladder compound Sr₂̣₅Ca₁₁̣₅Cu₂₄O₄₁ under pressure. The optical response is strongly anisotropic, with the highest reflectivity along the ladders/chains ( E∥c) revealing a metallic character. For the polarization direction perpendicular to the ladder plane, an insulating behavior is observed. With increasing pressure the optical conductivity for E∥c shows a strong increase, which is most pronounced below 2000cm⁻¹. According to the spectral weight analysis of the E∥c optical conductivity the hole concentration in the ladders increases with increasing pressure and tends to saturate at high pressure. At ~7.5 GPa the number of holesmore » per Cu atom in the ladders has increased by Δδ=0.09(±0.01), and the Cu valence in the ladders has reached the value +2.33. Thus, the optical data suggest that Sr₂̣₅Ca₁₁̣₅Cu₂₄O₄₁ remains electronically highly anisotropic up to high pressure, also at low temperatures.« less

  8. Biomechanical analysis of loading/unloading a ladder on a truck.

    PubMed

    Moriguchi, Cristiane Shinohara; Carnaz, Leticia; de Miranda, Luiz Carlos; Marklin, Richard William; Coury, Helenice Jane Cote Gil

    2012-01-01

    Loading/unloading a ladder on vehicles are frequent tasks and involve overhead handling that may expose workers to risk factors of shoulder musculoskeletal disorders. The objective of the present study was to evaluate posture, forces required and perceived exertion when loading and unloading the ladder on a utility truck. Thirteen male overhead line workers from an electric utility in Brazil participated in this study. Shoulder elevation angle was measured using inclinometers. The required force to load/unload the ladder was measured by dynamometer. Subjective assessment of the perceived exertion was recorded to compare the exertion reported during the test conditions to the field conditions. The task of loading/unloading the ladder presented risks of shoulder musculoskeletal disorders (MSDs) to workers because it requires high levels of force (approximately 60% of the maximal force) combined with overhead posture of the shoulders (more than 100° from the neutral posture). Age and height presented to interfere in biomechanical risks presented in load/unload task. There was no significant difference between the subjective exertion during the test conditions and handling the ladder in the field. Ergonomic intervention is recommended to reduce these risks for shoulder MSDs.

  9. New insights into the origin of ladder dikes: Implications for punctuated growth and crystal accumulation in the Cathedral Peak granodiorite

    NASA Astrophysics Data System (ADS)

    Wiebe, R. A.; Jellinek, A. M.; Hodge, K. F.

    2017-04-01

    Ladder dikes are steep tabular bodies, typically a meter or less thick, composed of moderately dipping, concave upward, alternating dark (i.e. schlieren) and light bands oriented roughly perpendicular to the ladder dike margins. These structures occur widely but sparsely in granitic rocks and are found prominently in the Cathedral Peak granodiorite (CPG) of the Tuolumne Intrusive suite. Previous studies have interpreted that ladder dikes form as a result of processes including the downward flow of crystal mush in cracks within strong crystal mush or by upward flow in steep tubes that migrate within a strong crystal mush. Our new observations indicate that ladder dikes formed by downward flow of crystal mush in troughs or valleys, in a manner potentially comparable to trough bands in mafic layered intrusions. Extensions of the schlieren outward and upward away from the ladder dike margins into the host granite demonstrate that the host granite was deposited as mounds on both sides at the same time as the ladder dikes. Ladder dikes, therefore, record lateral flows of crystal mush on a magma chamber floor. Vertical exposures suggest these flows are on the order of ten meters thick. Some steep exposures on granite domes indicate multiple ladder dikes (and flows) over a stratigraphic height of 80-100 m. Later (stratigraphically higher) flows commonly deform and erode the top of an earlier flow, and granitic material rich in K-feldspar megacrysts has locally engulfed large blocks of ladder dikes, demonstrating that the megacrysts were also transported in flows. Flows in the CPG are directed away from the center of the pluton toward the western and eastern margins and apparently spread along a strong crystal mush floor and into a rheologically complex CPG magma. Whereas established dynamical models for spreading (single phase) gravity currents with simple and complex rheologies explain the elongate geometry, spacing and orientation of the tabular bodies, the origin and character of the downward flows required to explain the trough band schlieren structures is challenging. However, an intermittent and progressive deposition of trough bands, consistent with field observations, is potentially explained if the two-phase (crystals and melt) dynamics governing the response of the CPG magma to a new injection are considered.

  10. Gluing Ladder Feynman Diagrams into Fishnets

    DOE PAGES

    Basso, Benjamin; Dixon, Lance J.

    2017-08-14

    We use integrability at weak coupling to compute fishnet diagrams for four-point correlation functions in planar Φ 4 theory. Our results are always multilinear combinations of ladder integrals, which are in turn built out of classical polylogarithms. The Steinmann relations provide a powerful constraint on such linear combinations, which leads to a natural conjecture for any fishnet diagram as the determinant of a matrix of ladder integrals.

  11. Wind River water restoration, Annual report November 2008 to October 2009.

    USGS Publications Warehouse

    Connolly, P.J.; Jezorek, I.G.; Munz, C.S.

    2010-01-01

    This report summarizes work completed by U.S. Geological Survey’s Columbia River Research Laboratory (USGS-CRRL) in the Wind River subbasin during the period November 2008 through October 2009 under Bonneville Power Administration (BPA) contract 41038. Long term research in the Wind River has focused on assessments of steelhead/rainbow trout Oncorhynchus mykiss populations, interactions with introduced populations of spring Chinook salmon O. tshawytscha and brook trout Salvelinus fontinalis, and influences of habitat variables on fish productivity. During this period, we collected water temperature data to characterize variation within and among tributaries and mainstem sections in the Trout Creek watershed, and assisted Washington Department of Fish and Wildlife with smolt trapping and tagging of smolt and parr steelhead with passive integrated transponder (PIT) tags. We also continued to maintain and test efficacy of a passive integrated transponder tag interrogation system (PTIS) in Trout Creek for assessing the adult steelhead runsize. We continued to maintain and download PTIS setups in the fish ladder at Hemlock Dam. These PTISs contributed information on movement and rearing of steelhead parr and smolts. A statement of work (SOW) was submitted to BPA in October 2009 that outlined work to be performed by USGS-CRRL. The SOW was organized by work elements, with each describing a research task. This report summarizes the progress completed under each work element.

  12. Fluxoids configurations in finite superconducting networks

    NASA Astrophysics Data System (ADS)

    Sharon, Omri J.; Haham, Noam; Shaulov, Avner A.; Yeshurun, Yosef

    2017-12-01

    Analysis of superconducting ladders consisting of rectangular loops, yields an Ising like expression for the total energy of the ladders as a function of the loops vorticities and the applied magnetic field. This expression shows that fluxoids can be treated as repulsively interacting objects driven towards the ladder center by the applied field. Distinctive repulsive interactions between fluxoids are obtained depending on the ratio l between the loops length and the common width of adjacent loops. A 'short range' and a 'long range' interactions obtained for l ≳ 1 and l ≪ 1, respectively, give rise to remarkably different fluxoid configurations. The different configurations of fluxoids in different types of ladders are illustrated by simulations.

  13. Design concepts for a high-impedance narrow-band 42 GHz power TWT using a fundamental/forward ladder-based circuit

    NASA Technical Reports Server (NTRS)

    Karp, A.

    1980-01-01

    A low-cost, narrowband, millimeter wave space communications TWT design was studied. Cold test interaction structure scale models were investigated and analyses were undertaken to predict the electrical and thermal response of the hypothetical 200 W TWT at 42 GHz and 21 kV beam voltage. An intentionally narrow instantaneous bandwidth (1%, with the possibility of electronic tuning of the center frequency over several percent) was sought with a highly dispersive, high impedance "forward wave' interaction structure based on a ladder (for economy in fabrication) and nonspace harmonic interaction, for a high gain rate and a short, economically focused tube. The "TunneLadder' interaction structure devised combines ladder properties with accommodation for a pencil beam. Except for the impedance and bandwidth, there is much in common with the millimeter wave helix TWTs which provided the ideal of diamond support rods. The benefits of these are enhanced in the TunneLadder case because of spatial separation of beam interception and RF current heating.

  14. Ladder Climbing and Autoresonant Acceleration of Plasma Waves

    NASA Astrophysics Data System (ADS)

    Barth, Ido; Dodin, Ilya; Fisch, Nathaniel

    2015-11-01

    When the background density in a bounded plasma is modulated in time, discrete modes become coupled. Interestingly, for appropriately chosen modulations, the average plasmon energy might be made to grow in a ladder-like manner, achieving up-conversion or down-conversion of the plasmon energy. This reversible process is identified as a classical analog of the effect known as quantum ladder climbing, so that the efficiency and the rate of this process can be written immediately by analogy to a quantum particle in a box. In the limit of densely spaced spectrum, ladder climbing transforms into continuous autoresonance; plasmons may then be manipulated by chirped background modulations much like electrons are autoresonantly manipulated by chirped fields. By formulating the wave dynamics within a universal Lagrangian framework, similar ladder climbing and autoresonance effects are predicted to be achievable with general linear waves in both plasma and other media. Supported by NNSA grant DE274-FG52-08NA28553, DOE contract DE-AC02-09CH11466, and DTRA grant HDTRA1-11-1-0037.

  15. Ladder-structured photonic variable delay device

    NASA Technical Reports Server (NTRS)

    Yao, X. Steve (Inventor)

    1998-01-01

    An ladder-structured variable delay device for providing variable true time delay to multiple optical beams simultaneously. The device comprises multiple basic units stacked on top of each other resembling a ladder. Each basic unit comprises a polarization sensitive corner reflector formed by two polarization beamsplitters and a polarization rotator array placed parallel to the hypotenuse of the corner reflector. Controlling an array element of the polarization rotator array causes an optical beam passing through the array element to either go up to a basic unit above it or reflect back towards output. The beams going higher on the ladder experience longer optical path delay. Finally, the ladder-structured variable device can be cascaded with another multi-channel delay device to form a new device which combines the advantages of the two individual devices. This programmable optic device has the properties of high packing density, low loss, easy fabrication, and virtually infinite bandwidth. In addition, the delay is reversible so that the same delay device can be used for both antenna transmitting and receiving.

  16. Heavy Metal Accumulation is Associated with Molecular and Pathological Perturbations in Liver of Variola louti from the Jeddah Coast of Red Sea.

    PubMed

    Mohamed, Saleh A; Elshal, Mohamed F; Kumosani, Taha A; Mal, Ahmad O; Ahmed, Youssri M; Almulaiky, Yaaser Q; Asseri, Amer H; Zamzami, Mazin A

    2016-03-21

    Large amounts of waste water are discharged daily from the Jeddah Metropolitan Area into the Red Sea. Sewage draining into the Red Sea causes widespread chemical pollution that is toxic to aquatic ecosystems. The objective of this study was to investigate the extent of pollution and assess the presence of heavy metals in fish tissue and study their association with biological and biochemical alterations. The average concentrations of heavy metals found in hepatic tissues of Variola louti fish from the polluted area, namely Cd, Cr, Cu, Fe and Zn, were 1.74, 9.69, 47.48, 4020.01 and 229.47 µg/g liver, respectively, that were significantly higher than that of samples taken from reference area (0.24, 1.98, 20.12, 721.93, 129.21 µg/g liver, respectively). The fold change of heavy metals in fish from the polluted area with respect of that of the reference area followed the order Cd > Fe > Cr > Cu > Zn. Analysis of nuclear DNA revealed that hepatic tissues of fish samples from the polluted area showed a significant increase in apoptotic cells as detected by flow cytometry and formation DNA-ladder. In addition, hepatic sections from polluted area fishes showed more fibrotic changes and collagen deposition by hematoxylin-eosin staining and Masson's trichrome staining, respectively, compared to samples taken from the reference area. Moreover, the electrophoretic patterns of proteins of liver of fishes caught at the polluted area showed different patterns of proteins from that of the reference with bands at 42, 130 and 140 kDa, which is in a good agreement with the molecular weight of collagen type III. In conclusion, there were significant changes in the tissues of fishes in the polluted area at the cellular and the molecular levels that may be associated with an accumulation of heavy metals. Assessment of fishes as a sensitive biomonitor for the pollution of surface waters that may affect general health of human and wild life is conceivable.

  17. Reconfigurable Analog PDE computation for Baseband and RFComputation

    DTIC Science & Technology

    2017-03-01

    waveguiding PDEs. One-dimensional ladder topologies enable linear delays, linear-phase analog filters , as well as analog beamforming, potentially at RF...performance. This discussion focuses on ODE / PDE analog computation available in SoC FPAA structures. One such computation is a ladder filter (Fig...Implementation of a one-dimensional ladder filter for computing inductor (L) and capacitor (C) lines. These components can be implemented in CABs or as

  18. Ladder operators and coherent states for the Jaynes-Cummings model in the rotating-wave approximation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hussin, V.; Nieto, L.M.

    2005-12-15

    Using algebraic techniques, we realize a systematic search of different types of ladder operators for the Jaynes-Cummings model in the rotating-wave approximation. The link between our results and previous studies on the diagonalization of the associated Hamiltonian is established. Using some of the ladder operators obtained before, examples are given on the possibility of constructing a variety of interesting coherent states for this Hamiltonian.

  19. The Health Services Mobility Study Method of Task Analysis and Curriculum Design. Research Report No. 11. Volume 3: Using the Computer to Develop Job Ladders.

    ERIC Educational Resources Information Center

    Gilpatrick, Eleanor

    This document is volume 3 of a four-volume report which describes the components of the Health Services Mobility Study (HSMS) method of task analysis, job ladder design, and curriculum development. Divided into four chapters, volume 3 is a manual for using HSMS computer based statistical procedures to design job structures and job ladders. Chapter…

  20. 49 CFR 180.403 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... to appurtenances, such as fender attachments, lighting brackets, ladder brackets; and (2) Replacement..., lighting brackets, ladder brackets; and (2) Replacement of components such as valves, vents, and fittings...

  1. Disclosure of Personalized Rheumatoid Arthritis Risk Using Genetics, Biomarkers, and Lifestyle Factors to Motivate Health Behavior Improvements: A Randomized Controlled Trial.

    PubMed

    Sparks, Jeffrey A; Iversen, Maura D; Yu, Zhi; Triedman, Nellie A; Prado, Maria G; Miller Kroouze, Rachel; Kalia, Sarah S; Atkinson, Michael L; Mody, Elinor A; Helfgott, Simon M; Todd, Derrick J; Dellaripa, Paul F; Bermas, Bonnie L; Costenbader, Karen H; Deane, Kevin D; Lu, Bing; Green, Robert C; Karlson, Elizabeth W

    2018-06-01

    To determine the effect of disclosure of rheumatoid arthritis (RA) risk personalized with genetics, biomarkers, and lifestyle factors on health behavior intentions. We performed a randomized controlled trial among first-degree relatives without RA. Subjects assigned to the Personalized Risk Estimator for Rheumatoid Arthritis (PRE-RA) group received the web-based PRE-RA tool for RA risk factor education and disclosure of personalized RA risk estimates, including genotype/autoantibody results and behaviors (n = 158). Subjects assigned to the comparison arm received standard RA education (n = 80). The primary outcome was readiness for change based on the trans-theoretical model, using validated contemplation ladder scales. Increased motivation to improve RA risk-related behaviors (smoking, diet, exercise, or dental hygiene) was defined as an increase in any ladder score compared to baseline, assessed immediately, 6 weeks, and 6 months post-intervention. Subjects reported behavior change at each visit. We performed intent-to-treat analyses using generalized estimating equations for the binary outcome. Subjects randomized to PRE-RA were more likely to increase ladder scores over post-intervention assessments (relative risk 1.23, 95% confidence interval [95% CI] 1.01, 1.51) than those randomized to nonpersonalized education. At 6 months, 63.9% of PRE-RA subjects and 50.0% of comparison subjects increased motivation to improve behaviors (age-adjusted difference 15.8%; 95% CI 2.8%, 28.8%). Compared to nonpersonalized education, more PRE-RA subjects increased fish intake (45.0% versus 22.1%; P = 0.005), brushed more frequently (40.7% versus 22.9%; P = 0.01), flossed more frequently (55.7% versus 34.8%; P = 0.004), and quit smoking (62.5% versus 0.0% among 11 smokers; P = 0.18). Disclosure of RA risk personalized with genotype/biomarker results and behaviors increased motivation to improve RA risk-related behaviors. Personalized medicine approaches may motivate health behavior improvements for those at risk for RA and provide rationale for larger studies evaluating effects of behavior changes on clinical outcomes, such as RA-related autoantibody production or RA development. © 2017, American College of Rheumatology.

  2. Impact of acid mine drainage on haematological, histopathological and genotoxic effects in golden mahaseer, Tor putitora.

    PubMed

    Shahi, Neetu; Sarma, Debaji; Pandey, Jyoti; Das, Partha; Sarma, Dandadhar; Mallik, Sumanta Kumar

    2016-07-01

    The present study was carried out to evaluate sub-lethal mechanism of acid mine drainage toxicity in fingerlings (9.5 ± 2.4 cm) of golden mahseer, Tor putitora. Exposed fingerlings showed significant reduction (P < 0.01) in blood erythrocytes, neutrophils, thrombocytes, lymphocytes and leukocytes in contrast to increase in number of immature circulating cells. Hyperplasia, degeneration of glomeruli, presence of inflammatory cells and increased number of melanomacrophage aggregates, vacuolization of cell cytoplasm, hepatocyte swelling were marked in kidney and liver of fish. Ladder in, an increment of 180-200 bp of hepatic and kidney DNA, by electrophoresis were consistent with DNA damage. 10 day exposure to acid mine drainage resulted in reduction of double stranded DNA to 46.0 and 48.0 in hepatocytes and kidney cells respectively. Significant increase (P < 0.01) in tail length and percent tail DNA was evident by comet assay. The results suggest that exposure to acid mine drainage might cause irreversible damage to immune cells, tissue and DNA of fish, and this model of DNA damage may contribute in identifying novel molecular mechanism of interest for bioremediation application.

  3. Doping evolution of charge and spin excitations in two-leg Hubbard ladders: Comparing DMRG and FLEX results [Doping evolution of charge and spin excitations in two-leg Hubbard ladders: Comparing DMRG and RPA+FLEX results

    DOE PAGES

    Nocera, Alberto; Wang, Yan; Patel, Niravkumar D.; ...

    2018-05-31

    Here, we study the magnetic and charge dynamical response of a Hubbard model in a two-leg ladder geometry using the density matrix renormalization group (DMRG) method and the random phase approximation within the fluctuation-exchange approximation (FLEX). Our calculations reveal that FLEX can capture the main features of the magnetic response from weak up to intermediate Hubbard repulsion for doped ladders, when compared with the numerically exact DMRG results. However, while at weak Hubbard repulsion both the spin and charge spectra can be understood in terms of weakly interacting electron-hole excitations across the Fermi surface, at intermediate coupling DMRG shows gappedmore » spin excitations at large momentum transfer that remain gapless within the FLEX approximation. For the charge response, FLEX can only reproduce the main features of the DMRG spectra at weak coupling and high doping levels, while it shows an incoherent character away from this limit. Overall, our analysis shows that FLEX works surprisingly well for spin excitations at weak and intermediate Hubbard U values even in the difficult low-dimensional geometry such as a two-leg ladder. Finally, we discuss the implications of our results for neutron scattering and resonant inelastic x-ray scattering experiments on two-leg ladder cuprate compounds.« less

  4. Doping evolution of charge and spin excitations in two-leg Hubbard ladders: Comparing DMRG and FLEX results [Doping evolution of charge and spin excitations in two-leg Hubbard ladders: Comparing DMRG and RPA+FLEX results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nocera, Alberto; Wang, Yan; Patel, Niravkumar D.

    Here, we study the magnetic and charge dynamical response of a Hubbard model in a two-leg ladder geometry using the density matrix renormalization group (DMRG) method and the random phase approximation within the fluctuation-exchange approximation (FLEX). Our calculations reveal that FLEX can capture the main features of the magnetic response from weak up to intermediate Hubbard repulsion for doped ladders, when compared with the numerically exact DMRG results. However, while at weak Hubbard repulsion both the spin and charge spectra can be understood in terms of weakly interacting electron-hole excitations across the Fermi surface, at intermediate coupling DMRG shows gappedmore » spin excitations at large momentum transfer that remain gapless within the FLEX approximation. For the charge response, FLEX can only reproduce the main features of the DMRG spectra at weak coupling and high doping levels, while it shows an incoherent character away from this limit. Overall, our analysis shows that FLEX works surprisingly well for spin excitations at weak and intermediate Hubbard U values even in the difficult low-dimensional geometry such as a two-leg ladder. Finally, we discuss the implications of our results for neutron scattering and resonant inelastic x-ray scattering experiments on two-leg ladder cuprate compounds.« less

  5. Real-space localization and quantification of hole distribution in chain-ladder Sr3Ca11Cu24O41 superconductor.

    PubMed

    Bugnet, Matthieu; Löffler, Stefan; Hawthorn, David; Dabkowska, Hanna A; Luke, Graeme M; Schattschneider, Peter; Sawatzky, George A; Radtke, Guillaume; Botton, Gianluigi A

    2016-03-01

    Understanding the physical properties of the chain-ladder Sr3Ca11Cu24O41 hole-doped superconductor has been precluded by the unknown hole distribution among chains and ladders. We use electron energy-loss spectrometry (EELS) in a scanning transmission electron microscope (STEM) at atomic resolution to directly separate the contributions of chains and ladders and to unravel the hole distribution from the atomic scale variations of the O-K near-edge structures. The experimental data unambiguously demonstrate that most of the holes lie within the chain layers. A quantitative interpretation supported by inelastic scattering calculations shows that about two holes are located in the ladders, and about four holes in the chains, shedding light on the electronic structure of Sr3Ca11Cu24O41. Combined atomic resolution STEM-EELS and inelastic scattering calculations is demonstrated as a powerful approach toward a quantitative understanding of the electronic structure of cuprate superconductors, offering new possibilities for elucidating their physical properties.

  6. ABC of ladder operators for rationally extended quantum harmonic oscillator systems

    NASA Astrophysics Data System (ADS)

    Cariñena, José F.; Plyushchay, Mikhail S.

    2017-07-01

    The problem of construction of ladder operators for rationally extended quantum harmonic oscillator (REQHO) systems of a general form is investigated in the light of existence of different schemes of the Darboux-Crum-Krein-Adler transformations by which such systems can be generated from the quantum harmonic oscillator. Any REQHO system is characterized by the number of separated states in its spectrum, the number of ‘valence bands’ in which the separated states are organized, and by the total number of the missing energy levels and their position. All these peculiarities of a REQHO system are shown to be detected and reflected by a trinity (A^+/- , B^+/- , C^+/-) of the basic (primary) lowering and raising ladder operators related between themselves by certain algebraic identities with coefficients polynomially-dependent on the Hamiltonian. We show that all the secondary, higher-order ladder operators are obtainable by a composition of the basic ladder operators of the trinity which form the set of the spectrum-generating operators. Each trinity, in turn, can be constructed from the intertwining operators of the two complementary minimal schemes of the Darboux-Crum-Krein-Adler transformations.

  7. Real-space localization and quantification of hole distribution in chain-ladder Sr3Ca11Cu24O41 superconductor

    PubMed Central

    Bugnet, Matthieu; Löffler, Stefan; Hawthorn, David; Dabkowska, Hanna A.; Luke, Graeme M.; Schattschneider, Peter; Sawatzky, George A.; Radtke, Guillaume; Botton, Gianluigi A.

    2016-01-01

    Understanding the physical properties of the chain-ladder Sr3Ca11Cu24O41 hole-doped superconductor has been precluded by the unknown hole distribution among chains and ladders. We use electron energy-loss spectrometry (EELS) in a scanning transmission electron microscope (STEM) at atomic resolution to directly separate the contributions of chains and ladders and to unravel the hole distribution from the atomic scale variations of the O-K near-edge structures. The experimental data unambiguously demonstrate that most of the holes lie within the chain layers. A quantitative interpretation supported by inelastic scattering calculations shows that about two holes are located in the ladders, and about four holes in the chains, shedding light on the electronic structure of Sr3Ca11Cu24O41. Combined atomic resolution STEM-EELS and inelastic scattering calculations is demonstrated as a powerful approach toward a quantitative understanding of the electronic structure of cuprate superconductors, offering new possibilities for elucidating their physical properties. PMID:27051872

  8. 34. Attic, from folding ladder, looking north Veterans Administration ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. Attic, from folding ladder, looking north - Veterans Administration Center, Officers Duplex Quarters, 5302 East Kellogg (Legal Address); 5500 East Kellogg (Common Address), Wichita, Sedgwick County, KS

  9. Development of a 39.5 GHz Karp traveling wave tube for use in space

    NASA Technical Reports Server (NTRS)

    Jacquez, A.; Wilson, D.

    1988-01-01

    A millimeter-wave TWT was developed using a dispersive, high-impedance forward wave interaction structure based on a ladder, with non-space-harmonic interaction, for a tube with high gain per inch and high efficiency. The 'Tunneladder' interaction structure combines ladder properties modified to accommodate Pierce gun beam optics on a radially magnetized PM focusing structure. The development involved the fabrication of chemically milled, shaped ladders diffusion brazed to each ridge of a double ridged waveguide. Cold-test data are presented, representing the omega-Beta and impedance characteristics of the modified ladder circuit These results were used in small and large-signal computer programs to predict TWT gain and efficiency. A laboratory model tube was designed and fabricated, including all major subassemblies.

  10. Piezoelectric biosensor with a ladder polymer substrate coating

    DOEpatents

    Renschler, Clifford L.; White, Christine A.; Carter, Robert M.

    1998-01-01

    A piezoelectric biosensor substrate useful for immobilizing biomolecules in an oriented manner on the surface of a piezoelectric sensor has a ladder polymer of polyacrylonitrile. To make the substrate, a solution of an organic polymer, preferably polyacrylonitrile, is applied to the surface of a piezoelectric sensor. The organic polymer is modifying by heating the polymer in a controlled fashion in air such that a ladder polymer is produced which, in turn, forms the attachment point for the biomolecules comprising the piezoelectric biosensor.

  11. Piezoelectric biosensor with a ladder polymer substrate coating

    DOEpatents

    Renschler, C.L.; White, C.A.; Carter, R.M.

    1998-09-29

    A piezoelectric biosensor substrate useful for immobilizing biomolecules in an oriented manner on the surface of a piezoelectric sensor has a ladder polymer of polyacrylonitrile. To make the substrate, a solution of an organic polymer, preferably polyacrylonitrile, is applied to the surface of a piezoelectric sensor. The organic polymer is modifying by heating the polymer in a controlled fashion in air such that a ladder polymer is produced which, in turn, forms the attachment point for the biomolecules comprising the piezoelectric biosensor. 3 figs.

  12. 7. DETAIL, WINDOWS AND SAFETY LADDER AT RECEIVING DEPARTMENT, NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. DETAIL, WINDOWS AND SAFETY LADDER AT RECEIVING DEPARTMENT, NORTH SIDE, NEAR WEST END. - United Engineering Company Shipyard, Inspection & Repair Shops, 2900 Main Street, Alameda, Alameda County, CA

  13. 29 CFR 1910.25 - Portable wood ladders.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... library ladders are not specifically covered by this section. (b) Materials—(1) Requirements applicable to... device of sufficient size and strength to securely hold the front and back sections in open positions...

  14. 29 CFR 1910.25 - Portable wood ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... library ladders are not specifically covered by this section. (b) Materials—(1) Requirements applicable to... device of sufficient size and strength to securely hold the front and back sections in open positions...

  15. 29 CFR 1910.26 - Portable metal ladders.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... of ladder equipment must be employed by the users. The following rules and regulations are essential... to oil and grease, equipment should be cleaned of oil, grease, or slippery materials. This can easily...

  16. 29 CFR 1910.26 - Portable metal ladders.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... of ladder equipment must be employed by the users. The following rules and regulations are essential... to oil and grease, equipment should be cleaned of oil, grease, or slippery materials. This can easily...

  17. 29 CFR 1910.26 - Portable metal ladders.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... of ladder equipment must be employed by the users. The following rules and regulations are essential... to oil and grease, equipment should be cleaned of oil, grease, or slippery materials. This can easily...

  18. Interplay of localized pyrene chromophores and π-conjugation in novel poly(2,7-pyrene) ladder polymers

    NASA Astrophysics Data System (ADS)

    Rudnick, Alexander; Kass, Kim-Julia; Preis, Eduard; Scherf, Ullrich; Bässler, Heinz; Köhler, Anna

    2017-05-01

    We present a detailed spectroscopic study, along with the synthesis, of conjugated, ladder-type 2,7-linked poly(pyrene)s. We observe a delocalization of the first singlet excited state along the polymer backbone, i.e., across the 2,7 linkage in the pyrene moiety, in contrast to earlier studies on conjugated 2,7-linked poly(pyrene)s without ladder structure. The electronic signature of the pyrene unit is, however, manifested in an increased lifetime and reduced oscillator strength as well as a modified vibronic progression in absorption of the singlet state compared to a ladder-type poly(para-phenylene) (MeLPPP). Furthermore, the reduced oscillator strength and increased lifetime slow down Förster-type energy transfer in films, where this transfer occurs to sites with increasing inter-chain coupling of H-type nature.

  19. Occupational ladder fall injuries - United States, 2011.

    PubMed

    Socias, Christina M; Chaumont Menéndez, Cammie K; Collins, James W; Simeonov, Peter

    2014-04-25

    Falls remain a leading cause of unintentional injury mortality nationwide [corrected].Among workers, approximately 20% of fall injuries involve ladders. Among construction workers, an estimated 81% of fall injuries treated in U.S. emergency departments (EDs) involve a ladder. To fully characterize fatal and nonfatal injuries associated with ladder falls among workers in the United States, CDC's National Institute for Occupational Safety and Health (NIOSH) analyzed data across multiple surveillance systems: 1) the Census of Fatal Occupational Injuries (CFOI), 2) the Survey of Occupational Injuries and Illnesses (SOII), and 3) the National Electronic Injury Surveillance System-occupational supplement (NEISS-Work). In 2011, work-related ladder fall injuries (LFIs) resulted in 113 fatalities (0.09 per 100,000 full-time equivalent [FTE] workers), an estimated 15,460 nonfatal injuries reported by employers that involved ≥1 days away from work (DAFW), and an estimated 34,000 nonfatal injuries treated in EDs. Rates for nonfatal, work-related, ED-treated LFIs were higher (2.6 per 10,000 FTE) than those for such injuries reported by employers (1.2 per 10,000 FTE). LFIs represent a substantial public health burden of preventable injuries for workers. Because falls are the leading cause of work-related injuries and deaths in construction, NIOSH, the Occupational Safety and Health Administration, and the Center for Construction Research and Training are promoting a national campaign to prevent workplace falls. NIOSH is also developing innovative technologies to complement safe ladder use.

  20. The effects of Navy ship ladder descent on the knee internal joint reaction forces

    NASA Astrophysics Data System (ADS)

    Coulter, Jonathan D.; Weinhandl, Joshua T.; Bawab, Sebastian Y.; Ringleb, Stacie I.

    2017-02-01

    Military populations may be at risk for developing knee osteoarthritis and other knee problems when descending a Navy ship ladder, which differs from traditional stairs due to non-overlapping treads, a larger rise and a steeper inclination angle. The purpose of this study was to develop a forward dynamic model of the descent of a Navy ship ladder to determine how this motion affects the internal knee reaction forces and how altering the hamstring/quadriceps ratio affects the internal joint reaction forces in the knee. Kinematic and kinetic data were collected from three male sailors descending a replica of a Navy ship ladder and were used as input into a model constructed in OpenSim. The peak resultant joint reaction force was 6.6 × BW, which was greater than values reported in the literature in traditional stairs. Peak compressive and anterior joint reaction forces, 4.05 × BW and 5.46 × BW, respectively, were greater than reported values for a squat, a motion similar to descending a ship ladder. The average peak vertical and anterior internal joint reaction force at the knee were 4.05 × BW and 5.46 × BW, respectively. The resultant joint reaction forces calculated from the ladder descent were greater than stair descent and squatting. Little effects were found in the joint reaction forces after adjusting the quadriceps to hamstring muscle strength ratios, possibly because these ratios might change the distribution of the contact forces across the joint, not the resultant forces.

  1. Using career ladders to motivate and retain employees: an implementation success story.

    PubMed

    Garletts, Joseph A

    2002-01-01

    In October 2000, Phoenix-based Sonora Quest Laboratories, LLC (SQL), commissioned The Gelfond Group to survey SQL employees. Responding to negative survey scores, SQL developed and implemented an entry-level career ladder for line staff of the specimen management/referral testing department. The program was piloted in February 2001, and was implemented fully shortly thereafter. The ladder was designed to provide job enrichment opportunities through company-conducted training and advancement provisions. It contained requirements for productivity and quality of work performed in addition to increasingly rigorous training and competency documentation. Employees were accountable for their own advancement and for ensuring that all documentation was complete. Advancement was automatic once requirements were completed. Pay increases accompanied each advancement on a predetermined scale. At the end of 12 months, employee turnover dropped from 39% to less than 20% annually. Both productivity and morale improved, and results on a second employee survey indicated dramatic improvement in five key areas. The career ladder concept has been replicated successfully in several other departments, including phlebotomy, and a six-tiered ladder is under development for the clinical laboratory. It will encompass CLA, MLT, and MT positions from entry level to technical coordinator.

  2. Synthesis of dibenzothiophene-containing ladder polysilsesquioxane as a blue phosphorescent host material.

    PubMed

    Ren, Zhongjie; Sun, Dianming; Li, Huihui; Fu, Qiang; Ma, Dongge; Zhang, Jianming; Yan, Shouke

    2012-03-26

    A ladder polysilsesquioxanes with side chain of dibenzothiophene groups (BS-LPSQ) was successfully synthesized. The ladder structure of BS-LPSQ was characterized by MALDI-TOF MS, XRD, and (1)H NMR spectroscopy. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), atomic force microscopy (AFM), and spectroscopic analyses revealed that the BS-LPSQ has good film-forming ability, high thermal and morphological stability, and good miscibility to the dopant iridium bis(4,6-difluorophenyl)pyridinato-N,C(2)-picolinate (FIrpic), high triplet energy, and a wide bandgap. In addition, compared with the ringed polysiloxane BS-PSQ phosphorescent host material reported previously, the ladder structure of BS-LPSQ has not only a higher thermal resistance, but also could prevent molecular aggregation and effectively avoid quenching of fluorescence. Thus, the BS-LPSQ may be used as a better host for the blue-light-emitting iridium complex FIrpic. The performance of the electrophosphorescent device, based on the ladder BS-LPSQ as the active layer, is superior to that of ringed BS-PSQ and any other polyhedral oligomeric silsesquioxane (POSS)-based or polymer host materials. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. 46 CFR 163.003-1 - Scope.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... production tests for a pilot ladder used on a merchant vessel to embark and disembark pilots and other persons when away from the dock. (b) The requirements in this subpart apply to a pilot ladder designed for...

  4. Observation hall along west side. Looking south to escape ladder. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Observation hall along west side. Looking south to escape ladder. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Instrumentation & Control Building, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  5. 46 CFR 160.017-1 - Scope.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... approval and production tests for chain ladders used on a merchant vessel to get on and off the vessel in an emergency. (b) The requirements in this subpart apply to a chain ladder designed for use along a...

  6. Controlled parity switch of persistent currents in quantum ladders

    NASA Astrophysics Data System (ADS)

    Filippone, Michele; Bardyn, Charles-Edouard; Giamarchi, Thierry

    2018-05-01

    We investigate the behavior of persistent currents for a fixed number of noninteracting fermions in a periodic quantum ladder threaded by Aharonov-Bohm and transverse magnetic fluxes Φ and χ . We show that the coupling between ladder legs provides a way to effectively change the ground-state fermion-number parity, by varying χ . Specifically, we demonstrate that varying χ by 2 π (one flux quantum) leads to an apparent fermion-number parity switch. We find that persistent currents exhibit a robust 4 π periodicity as a function of χ , despite the fact that χ →χ +2 π leads to modifications of order 1 /N of the energy spectrum, where N is the number of sites in each ladder leg. We show that these parity-switch and 4 π periodicity effects are robust with respect to temperature and disorder, and outline potential physical realizations using cold atomic gases and photonic lattices, for bosonic analogs of the effects.

  7. Phase diagram and re-entrant fermionic entanglement in a hybrid Ising-Hubbard ladder

    NASA Astrophysics Data System (ADS)

    Sousa, H. S.; Pereira, M. S. S.; de Oliveira, I. N.; Strečka, J.; Lyra, M. L.

    2018-05-01

    The degree of fermionic entanglement is examined in an exactly solvable Ising-Hubbard ladder, which involves interacting electrons on the ladder's rungs described by Hubbard dimers at half-filling on each rung, accounting for intrarung hopping and Coulomb terms. The coupling between neighboring Hubbard dimers is assumed to have an Ising-like nature. The ground-state phase diagram consists of four distinct regions corresponding to the saturated paramagnetic, the classical antiferromagnetic, the quantum antiferromagnetic, and the mixed classical-quantum phase. We have exactly computed the fermionic concurrence, which measures the degree of quantum entanglement between the pair of electrons on the ladder rungs. The effects of the hopping amplitude, the Coulomb term, temperature, and magnetic fields on the fermionic entanglement are explored in detail. It is shown that the fermionic concurrence displays a re-entrant behavior when quantum entanglement is being generated at moderate temperatures above the classical saturated paramagnetic ground state.

  8. Fractal ladder models and power law wave equations

    PubMed Central

    Kelly, James F.; McGough, Robert J.

    2009-01-01

    The ultrasonic attenuation coefficient in mammalian tissue is approximated by a frequency-dependent power law for frequencies less than 100 MHz. To describe this power law behavior in soft tissue, a hierarchical fractal network model is proposed. The viscoelastic and self-similar properties of tissue are captured by a constitutive equation based on a lumped parameter infinite-ladder topology involving alternating springs and dashpots. In the low-frequency limit, this ladder network yields a stress-strain constitutive equation with a time-fractional derivative. By combining this constitutive equation with linearized conservation principles and an adiabatic equation of state, a fractional partial differential equation that describes power law attenuation is derived. The resulting attenuation coefficient is a power law with exponent ranging between 1 and 2, while the phase velocity is in agreement with the Kramers–Kronig relations. The fractal ladder model is compared to published attenuation coefficient data, thus providing equivalent lumped parameters. PMID:19813816

  9. Pressure-induced superconductivity in the iron-based ladder material BaFe2S3.

    PubMed

    Takahashi, Hiroki; Sugimoto, Akira; Nambu, Yusuke; Yamauchi, Touru; Hirata, Yasuyuki; Kawakami, Takateru; Avdeev, Maxim; Matsubayashi, Kazuyuki; Du, Fei; Kawashima, Chizuru; Soeda, Hideto; Nakano, Satoshi; Uwatoko, Yoshiya; Ueda, Yutaka; Sato, Taku J; Ohgushi, Kenya

    2015-10-01

    All the iron-based superconductors identified so far share a square lattice composed of Fe atoms as a common feature, despite having different crystal structures. In copper-based materials, the superconducting phase emerges not only in square-lattice structures but also in ladder structures. Yet iron-based superconductors without a square-lattice motif have not been found, despite being actively sought out. Here, we report the discovery of pressure-induced superconductivity in the iron-based spin-ladder material BaFe2S3, a Mott insulator with striped-type magnetic ordering below ∼120 K. On the application of pressure this compound exhibits a metal-insulator transition at about 11 GPa, followed by the appearance of superconductivity below Tc = 14 K, right after the onset of the metallic phase. Our findings indicate that iron-based ladder compounds represent promising material platforms, in particular for studying the fundamentals of iron-based superconductivity.

  10. Staggered Orbital Currents in the Half-Filled Two-Leg Ladder

    NASA Astrophysics Data System (ADS)

    Fjaerestad, J. O.; Marston, Brad; Sudbo, A.

    2002-03-01

    We present strong analytical and numerical evidence for the existence of a staggered flux (SF) phase in the half-filled two-leg ladder, with true long-range order in the counter-circulating currents. Using abelian bosonization with a careful treatment of the Klein factors, we show that a certain phase of the half-filled ladder, previously identified as having spin-Peierls order, instead exhibits staggered orbital currents with no dimerization.(J. O. Fjærestad and J. B. Marston, cond- mat/0107094.) This result, combined with a weak-coupling renormalization-group analysis, implies that the SF phase exists in a region of the phase diagram of the half-filled t-U-V-J ladder. Using the density-matrix renormalization-group (DMRG) approach generalized to complex-valued wavefunctions, we demonstrate that the SF phase exhibits robust currents at intermediate values of the interaction strengths.

  11. Magnetic properties and pairing tendencies of the iron-based superconducting ladder BaFe 2 S 3 : Combined ab initio and density matrix renormalization group study

    DOE PAGES

    Patel, Niravkumar D.; Nocera, Alberto; Alvarez, Gonzalo; ...

    2016-08-10

    The recent discovery of superconductivity under high pressure in the two-leg ladder compound BaFe 2S 3 [H. Takahashi et al., Nat. Mater. 14, 1008 (2015)] opens a broad avenue of research, because it represents the first report of pairing tendencies in a quasi-one-dimensional iron-based high-critical-temperature superconductor. Similarly, as in the case of the cuprates, ladders and chains can be far more accurately studied using many-body techniques and model Hamiltonians than their layered counterparts, particularly if several orbitals are active. In this publication, we derive a two-orbital Hubbard model from first principles that describes individual ladders of BaFe 2S 3. Themore » model is studied with the density matrix renormalization group. These first reported results are exciting for two reasons: (i) at half-filling, ferromagnetic order emerges as the dominant magnetic pattern along the rungs of the ladder, and antiferromagnetic order along the legs, in excellent agreement with neutron experiments; and (ii) with hole doping, pairs form in the strong coupling regime, as found by studying the binding energy of two holes doped on the half-filled system. In addition, orbital selective Mott phase characteristics develop with doping, with only oneWannier orbital receiving the hole carriers while the other remains half-filled. Lastly, these results suggest that the analysis of models for iron-based two-leg ladders could clarify the origin of pairing tendencies and other exotic properties of iron-based high-critical-temperature superconductors in general.« less

  12. Climbing the Cosmic Distance Ladder Artist Concept

    NASA Image and Video Library

    2012-10-03

    Astronomers using NASA Spitzer Space Telescope have greatly improved the cosmic distance ladder used to measure the expansion rate of the universe, its size and age. This artist concept symbolically shows a series of stars that have known distances.

  13. LEANTO INTERIOR, LOOKING EAST. Image shows: ladder attached to south ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LEAN-TO INTERIOR, LOOKING EAST. Image shows: ladder attached to south façade, gate separating hay storage from animal pens, and east wall construction. - Boyer Farm, Barn, 711 South Fort Casey Road, Coupeville, Island County, WA

  14. 46 CFR 116.438 - Stairtowers, stairways, ladders, and elevators.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    .... (1) Stairways, stairtowers, ladders, elevators, and landings must be designed with sufficient... accommodation spaces: Designed capacity; (ii) Accommodation spaces having fixed seating for passengers: Maximum seating capacity; (iii) Public spaces, including spaces such as casinos, restaurants, club rooms, and...

  15. Ladder Operators for Some Spherically Symmetric Potentials in Quantum Mechanics

    ERIC Educational Resources Information Center

    Newmarch, J. D.; Golding, R. M.

    1978-01-01

    The energy levels of the free field, Coulomb potential, and the three-dimensional harmonic oscillator are found using the Dirac operator formalism by the construction of suitable ladder operators. The degeneracy of each level is also discussed. (Author/GA)

  16. "Ladder" structure in tonal noise generated by laminar flow around an airfoil.

    PubMed

    Chong, Tze Pei; Joseph, Phillip

    2012-06-01

    The presence of a "ladder" structure in the airfoil tonal noise was discovered in the 1970s, but its mechanism hitherto remains a subject of continual investigation in the research community. Based on the measured noise results and some numerical analysis presented in this letter, the variations of four types of airfoil tonal noise frequencies with the flow velocity were analyzed individually. The ladder structure is proposed to be caused by the acoustic/hydrodynamic frequency lag between the scattering of the boundary layer instability noise and the discrete noise produced by an aeroacoustic feedback loop.

  17. Analytical recursive method to ascertain multisite entanglement in doped quantum spin ladders

    NASA Astrophysics Data System (ADS)

    Roy, Sudipto Singha; Dhar, Himadri Shekhar; Rakshit, Debraj; SenDe, Aditi; Sen, Ujjwal

    2017-08-01

    We formulate an analytical recursive method to generate the wave function of doped short-range resonating valence bond (RVB) states as a tool to efficiently estimate multisite entanglement as well as other physical quantities in doped quantum spin ladders. We prove that doped RVB ladder states are always genuine multipartite entangled. Importantly, our results show that within specific doping concentration and model parameter regimes, the doped RVB state essentially characterizes the trends of genuine multiparty entanglement in the exact ground states of the Hubbard model with large on-site interactions, in the limit that yields the t -J Hamiltonian.

  18. Simulation of TunneLadder traveling-wave tube cold-test characteristics: Implementation of the three-dimensional, electromagnetic circuit analysis code micro-SOS

    NASA Technical Reports Server (NTRS)

    Kory, Carol L.; Wilson, Jeffrey D.

    1993-01-01

    The three-dimensional, electromagnetic circuit analysis code, Micro-SOS, can be used to reduce expensive time-consuming experimental 'cold-testing' of traveling-wave tube (TWT) circuits. The frequency-phase dispersion characteristics and beam interaction impedance of a TunneLadder traveling-wave tube slow-wave structure were simulated using the code. When reasonable dimensional adjustments are made, computer results agree closely with experimental data. Modifications to the circuit geometry that would make the TunneLadder TWT easier to fabricate for higher frequency operation are explored.

  19. Majorana spin liquids, topology, and superconductivity in ladders

    NASA Astrophysics Data System (ADS)

    Le Hur, Karyn; Soret, Ariane; Yang, Fan

    2017-11-01

    We theoretically address spin chain analogs of the Kitaev quantum spin model on the honeycomb lattice. The emergent quantum spin-liquid phases or Anderson resonating valence-bond (RVB) states can be understood, as an effective model, in terms of p -wave superconductivity and Majorana fermions. We derive a generalized phase diagram for the two-leg ladder system with tunable interaction strengths between chains allowing us to vary the shape of the lattice (from square to honeycomb ribbon or brickwall ladder). We evaluate the winding number associated with possible emergent (topological) gapless modes at the edges. In the Az phase, as a result of the emergent Z2 gauge fields and π -flux ground state, one may build spin-1/2 (loop) qubit operators by analogy to the toric code. In addition, we show how the intermediate gapless B phase evolves in the generalized ladder model. For the brick-wall ladder, the B phase is reduced to one line, which is analyzed through perturbation theory in a rung tensor product states representation and bosonization. Finally, we show that doping with a few holes can result in the formation of hole pairs and leads to a mapping with the Su-Schrieffer-Heeger model in polyacetylene; a superconducting-insulating quantum phase transition for these hole pairs is accessible, as well as related topological properties.

  20. The transport dynamics of chloride and sodium in a ladder fen during a continuous wastewater polishing experiment

    NASA Astrophysics Data System (ADS)

    McCarter, Colin P. R.; Price, Jonathan S.

    2017-06-01

    Ladder fen peatlands have excellent potential for wastewater polishing as they naturally contain both open water (pools) and subsurface (peat) treatment landforms; however, there is a poor understanding of solute transport in ladder fens with and without the increased hydrological load imposed by wastewater discharge. To better understand solute transport in ladder fens under wastewater polishing conditions a continuous solute (NaCl) tracer experiment (38 m3 day-1 of water, chloride - 47.2 mg L-1, and sodium - 25.3 mg L-1) was conducted during the summer of 2014 (day of year 192-243) in a small ladder fen in the James Bay Lowland. The transmissivity distribution and effective porosity (average 0.5) of the peat ribs were determined through repeated bail tests and the drainable porosity of 18 peat cores at -100 mb, respectively. Water samples were taken at least every 7 days to capture the solute (sodium and chloride) plumes. Both solute plumes never reached the site outflow (∼250 m downgradient) and displayed complex plume morphology, typically following the patterns of higher hydraulic conductivity within the upper 0.1 m of the saturated peat, rather than the microtopography. Based on the 50% breakthrough isotherms, sodium and chloride were transported at an average solute velocity of 1.9 and 1.1 m day-1, respectively (average linear groundwater velocity = 2.1 m day-1); thus, the solutes were retarded by a factor of 2.1 and 1.2 for sodium and chloride, respectively. Due to the inherent retardation of solutes into inactive pores and relatively high solute residence times, this study demonstrates the potential for wastewater polishing in ladder fens.

  1. Poly[[sesqui[mu2-1,4-bis(imidazol-1-ylmethyl)benzene-kappa(2)N:N'](carbonato-kappa(2)O,O')copper(II)] 1,4-bis(imidazol-1-ylmethyl)benzene hemisolvate pentahydrate].

    PubMed

    Dai, Yu-Mei; Tang, En; Huang, Jin-Feng; Yang, Qiu-Yan

    2008-10-01

    The asymmetric unit of the title compound, {[Cu(CO(3))(C(14)H(14)N(4))(1.5)] x 0.5 C(14)H(14)N(4) x 5 H(2)O}(n), contains one Cu(II) cation in a slightly distorted square-pyramidal coordination environment, one CO(3)(2-) anion, one full and two half 1,4-bis(imidazol-1-ylmethyl)benzene (bix) ligands, one half-molecule of which is uncoordinated, and five uncoordinated water molecules. One of the coordinated bix ligands and the uncoordinated bix molecule are situated about centers of symmetry, located at the centers of the benzene rings. The coordinated bix ligands link the copper(II) ions into a [Cu(bix)(1.5)](n) molecular ladder. These molecular ladders do not form interpenetrated ladders but are arranged in an ABAB parallel terrace, i.e. with the ladders arranged one above another, with sequence A translated with respect to B by 8 A. To best of our knowledge, this arrangement has not been observed in any of the molecular ladder frameworks synthesized to date. The coordination environment of the Cu(II) atom is completed by two O atoms of the CO(3)(2-) anion. The framework is further strengthened by extensive O-H...O and O-H...N hydrogen bonds involving the water molecules, the O atoms of the CO(3)(2-) anion and the N atoms of the bix ligands. This study describes the first example of a molecular ladder coordination polymer based on bix and therefore demonstrates further the usefulness of bix as a versatile multidentate ligand for constructing coordination polymers with interesting architectures.

  2. 29 CFR 1917.118 - Fixed ladders.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... bolts or structural members of tanks and towers; (3) Ladders built into or vertically attached to..., microwave communications, electrical power and similar towers, poles and structures, including stacks and... consisting of individual rungs that are attached to walls, conical manhole sections or river cells shall: (1...

  3. 29 CFR 1917.118 - Fixed ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... bolts or structural members of tanks and towers; (3) Ladders built into or vertically attached to..., microwave communications, electrical power and similar towers, poles and structures, including stacks and... consisting of individual rungs that are attached to walls, conical manhole sections or river cells shall: (1...

  4. 46 CFR 163.003-13 - Construction.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Construction. 163.003-13 Section 163.003-13 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-13 Construction. (a) General. Each pilot ladder...

  5. 46 CFR 163.003-13 - Construction.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Construction. 163.003-13 Section 163.003-13 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-13 Construction. (a) General. Each pilot ladder...

  6. 46 CFR 163.003-13 - Construction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Construction. 163.003-13 Section 163.003-13 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-13 Construction. (a) General. Each pilot ladder...

  7. 46 CFR 163.003-13 - Construction.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Construction. 163.003-13 Section 163.003-13 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-13 Construction. (a) General. Each pilot ladder...

  8. 29 CFR 1910.26 - Portable metal ladders.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Walking-Working Surfaces § 1910.26 Portable metal ladders. (a... material for the safety of the user. (viii) A metal spreader or locking device of sufficient size and...

  9. 46 CFR 160.017-17 - Strength.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Strength. 160.017-17 Section 160.017-17 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-17 Strength. (a) Each chain ladder must...

  10. 46 CFR 163.003-17 - Strength.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Strength. 163.003-17 Section 163.003-17 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-17 Strength. (a) Each pilot ladder must be...

  11. 46 CFR 160.017-17 - Strength.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Strength. 160.017-17 Section 160.017-17 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-17 Strength. (a) Each chain ladder must...

  12. 46 CFR 163.003-17 - Strength.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Strength. 163.003-17 Section 163.003-17 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-17 Strength. (a) Each pilot ladder must be...

  13. 37. INTERIOR VIEW OF TANK FROM THE TOP, SHOWING LADDERS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. INTERIOR VIEW OF TANK FROM THE TOP, SHOWING LADDERS ON SIDES AND THE WATERTIGHT DOOR OF THE 18-FOOT LOCK No date - U.S. Naval Submarine Base, New London Submarine Escape Training Tank, Albacore & Darter Roads, Groton, New London County, CT

  14. 46 CFR 163.003-15 - Performance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Performance. 163.003-15 Section 163.003-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-15 Performance. (a) Each pilot ladder must be...

  15. 46 CFR 160.017-15 - Performance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

  16. 46 CFR 160.017-15 - Performance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

  17. 46 CFR 163.003-15 - Performance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Performance. 163.003-15 Section 163.003-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-15 Performance. (a) Each pilot ladder must be...

  18. 46 CFR 160.017-15 - Performance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

  19. 46 CFR 163.003-15 - Performance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Performance. 163.003-15 Section 163.003-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-15 Performance. (a) Each pilot ladder must be...

  20. 46 CFR 160.017-15 - Performance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

  1. 46 CFR 160.017-15 - Performance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

  2. 46 CFR 163.003-15 - Performance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Performance. 163.003-15 Section 163.003-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-15 Performance. (a) Each pilot ladder must be...

  3. 46 CFR 163.003-15 - Performance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Performance. 163.003-15 Section 163.003-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-15 Performance. (a) Each pilot ladder must be...

  4. Nestling diets and provisioning rates of sympatric Golden-fronted and Ladder-backed Woodpeckers

    USGS Publications Warehouse

    Schroeder, Evonne L.; Boal, Clint W.; Glasscock, Selma N.

    2013-01-01

    We examined comparative food use and provisioning of Golden-fronted (Melanerpes aurifrons) and Ladder-backed (Picoides scalaris) woodpeckers at the Rob and Bessie Welder Wildlife Foundation Refuge, in San Patricio County, Texas. We combined video surveillance and direct observations to monitor provisioning rates and identify items delivered by adult woodpeckers to nestlings. We collected 328 hours of data at Ladder-backed Woodpecker nest cavities and 230 hours of data at Golden-fronted Woodpecker nest cavities. Ladder-backed Woodpecker nestling diets consisted of 100% animal matter, comprised of invertebrate larvae (99%) and invertebrate adults (< 1%). Diets of Golden-fronted Woodpecker nestlings were also high in animal matter (77%) with more invertebrate adults (55%) and fewer invertebrate larvae (27%), but also included vegetable matter (16%). Morisita's measure of overlap suggested a relatively low dietary overlap of 31% between nestlings of these two sympatric woodpecker species. Foraging methods used by these species may explain their low dietary overlap and facilitate their coexistence.

  5. Conjugated ladder polymers by a cyclopentannulation polymerization

    DOE PAGES

    Bheemireddy, Sambasiva R.; Hautzinger, Matthew P.; Li, Tao; ...

    2017-04-03

    Here, we report a nontraditional synthesis of cyclopentafused-polycyclic aromatic hydrocarbon embedded ladder polymers using a palladium catalyzed cyclopentannulation polymerization followed by a cyclodehydrogenation reaction. Donor–acceptor type polymers containing a cyclopenta[hi]aceanthrylene acceptor groups can be synthesized by a palladium catalyzed copolymerization between 9,10-dibromoanthracene and a variety of bis(arylethynyl)arenes to give polymers with molecular weights (Mn) of 9–22 kDa. The bis(arylethynyl)arenes were composed of benzene, thiophene, or thieno[3,2- b]thiophene moieties, which provided access to a series of four donor–acceptor copolymers. The polymers were subjected to cyclodehydrogenation with FeCl 3 to access rigid ladder type polymers with the conversion investigated by 13C NMRmore » of isotopically labeled polymers. As a result, the ladder polymers possess broad UV–Vis absorptions and narrow optical band gaps of 1.17–1.29 eV and are p-type semiconductors in organic field effect transistors.« less

  6. Conjugated ladder polymers by a cyclopentannulation polymerization

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bheemireddy, Sambasiva R.; Hautzinger, Matthew P.; Li, Tao

    Here, we report a nontraditional synthesis of cyclopentafused-polycyclic aromatic hydrocarbon embedded ladder polymers using a palladium catalyzed cyclopentannulation polymerization followed by a cyclodehydrogenation reaction. Donor–acceptor type polymers containing a cyclopenta[hi]aceanthrylene acceptor groups can be synthesized by a palladium catalyzed copolymerization between 9,10-dibromoanthracene and a variety of bis(arylethynyl)arenes to give polymers with molecular weights (Mn) of 9–22 kDa. The bis(arylethynyl)arenes were composed of benzene, thiophene, or thieno[3,2- b]thiophene moieties, which provided access to a series of four donor–acceptor copolymers. The polymers were subjected to cyclodehydrogenation with FeCl 3 to access rigid ladder type polymers with the conversion investigated by 13C NMRmore » of isotopically labeled polymers. As a result, the ladder polymers possess broad UV–Vis absorptions and narrow optical band gaps of 1.17–1.29 eV and are p-type semiconductors in organic field effect transistors.« less

  7. Investigation of electronic transport through a ladder-like graphene nanoribbon including random distributed impurities

    NASA Astrophysics Data System (ADS)

    Esmaili, Esmat; Mardaani, Mohammad; Rabani, Hassan

    2018-01-01

    The electronic transport of a ladder-like graphene nanoribbon which the on-site or hopping energies of a small part of it can be random is modeled by using the Green's function technique within the nearest neighbor tight-binding approach. We employ a unitary transformation in order to convert the Hamiltonian of the nanoribbon to the Hamiltonian of a tight-binding ladder-like network. In this case, the disturbed part of the system includes the second neighbor hopping interactions. While, the converted Hamiltonian of each ideal part is equivalent to the Hamiltonian of two periodic on-site chains. Therefore, we can insert the self-energies of the alternative on-site tight-binding chains to the inverse of the Green's function matrix of the ladder-like part. In this viewpoint, the conductance is constructed from two trans and cis contributions. The results show that increasing the disorder strength causes the increase and decrease of the conductance of the trans and cis contributions, respectively.

  8. The one step fermionic ladder

    NASA Astrophysics Data System (ADS)

    Das, Joy Prakash; Setlur, Girish S.

    2017-10-01

    The one step fermionic ladder refers to two parallel Luttinger Liquids (poles of the ladder) placed such that there is a finite probability of electrons hopping between the two poles at a pair of opposing points along each of the poles. The many-body Green function for such a system is calculated in presence of forward scattering interactions using the powerful non-chiral bosonization technique (NCBT). This technique is based on a non-standard harmonic analysis of the rapidly varying parts of the density fields appropriate for the study of strongly inhomogeneous ladder systems. The closed analytical expression for the correlation function obtained from NCBT is nothing but the series involving the RPA (Random Phase Approximation) diagrams in powers of the forward scattering coupling strength resummed to include only the most singular terms with the source of inhomogeneities treated exactly. Finally the correlation functions are used to study physical phenomena such as Friedel oscillations and the conductance of such systems with the potential difference applied across various ends.

  9. Effect of sieving polymer concentration on separation of 100 bp DNA Ladder by capillary gel electrophoresis

    NASA Astrophysics Data System (ADS)

    Nakazumi, T.; Hara, Y.

    2017-09-01

    We studied the effect of sieving polymer concentration on separation of a 100 bp DNA Ladder by capillary gel electrophoresis (CGE) using hydroxyethyl cellulose (HEC) with a molecular size of 1000 k. For measurement purposes, we selected a fused silica capillary with total length of 15 cm and effective length of 7.5 cm; this was applied to compact CGE equipment for a Point-Care-Testing (POCT) system. Measurement results of the 100 bp DNA Ladder sample indicated that small DNA separation was significantly affected by HEC sieving polymer concentration. This was due to the level of entanglement between small DNA molecules and the sieving polymer chain significantly influencing migration time, mobility, and resolution length of the CGE process. We concluded that 1.0 w/v % HEC sieving polymer concentration was optimal for CGE separation of DNA ≥1000bp in the 100 bp DNA Ladder (100-1500 bp) when using the short-length capillary.

  10. Cavity-induced artificial gauge field in a Bose-Hubbard ladder

    NASA Astrophysics Data System (ADS)

    Halati, Catalin-Mihai; Sheikhan, Ameneh; Kollath, Corinna

    2017-12-01

    We consider theoretically ultracold interacting bosonic atoms confined to quasi-one-dimensional ladder structures formed by optical lattices and coupled to the field of an optical cavity. The atoms can collect a spatial phase imprint during a cavity-assisted tunneling along a rung via Raman transitions employing a cavity mode and a transverse running wave pump beam. By adiabatic elimination of the cavity field we obtain an effective Hamiltonian for the bosonic atoms, with a self-consistency condition. Using the numerical density-matrix renormalization-group method, we obtain a rich steady-state diagram of self-organized steady states. Transitions between superfluid to Mott-insulating states occur, on top of which we can have Meissner, vortex liquid, and vortex lattice phases. Also a state that explicitly breaks the symmetry between the two legs of the ladder, namely, the biased-ladder phase, is dynamically stabilized. We investigate the influence that a trapping potential has on the stability of the self-organized phases.

  11. Ladder physics in the spin fermion model

    NASA Astrophysics Data System (ADS)

    Tsvelik, A. M.

    2017-05-01

    A link is established between the spin fermion (SF) model of the cuprates and the approach based on the analogy between the physics of doped Mott insulators in two dimensions and the physics of fermionic ladders. This enables one to use nonperturbative results derived for fermionic ladders to move beyond the large-N approximation in the SF model. It is shown that the paramagnon exchange postulated in the SF model has exactly the right form to facilitate the emergence of the fully gapped d -Mott state in the region of the Brillouin zone at the hot spots of the Fermi surface. Hence, the SF model provides an adequate description of the pseudogap.

  12. Bound States and Field-Polarized Haldane Modes in a Quantum Spin Ladder.

    PubMed

    Ward, S; Mena, M; Bouillot, P; Kollath, C; Giamarchi, T; Schmidt, K P; Normand, B; Krämer, K W; Biner, D; Bewley, R; Guidi, T; Boehm, M; McMorrow, D F; Rüegg, Ch

    2017-04-28

    The challenge of one-dimensional systems is to understand their physics beyond the level of known elementary excitations. By high-resolution neutron spectroscopy in a quantum spin-ladder material, we probe the leading multiparticle excitation by characterizing the two-magnon bound state at zero field. By applying high magnetic fields, we create and select the singlet (longitudinal) and triplet (transverse) excitations of the fully spin-polarized ladder, which have not been observed previously and are close analogs of the modes anticipated in a polarized Haldane chain. Theoretical modeling of the dynamical response demonstrates our complete quantitative understanding of these states.

  13. Assessment and the National Languages Strategy

    ERIC Educational Resources Information Center

    Jones, Neil

    2007-01-01

    The Languages Ladder--a new framework for accrediting language proficiency--is a core element of the National Languages Strategy. This paper presents Asset Languages, the system being developed by Cambridge Assessment to implement the Languages Ladder, aiming to set it apart from existing qualification frameworks by accrediting clearly defined…

  14. Development of Processible Electroactive Oligomers and Polymers

    DTIC Science & Technology

    1991-10-01

    of structure and electroactive properties. Electroactive molecules including fused ring (ladder oligomers) dyes , squarylium -heterocyclic moieties...Electroactive molecules including fused ring (ladder oligomers) dyes , squarylium -heterocyclic moieties, phenylpolyenes, thienylpolyenes, carbocyanine dyes ...phenylpolyenes, thienylpolyenes, carbocyanine dyes , and tetraazaannulenes have also been synthetically incorporated into a variety of traditional

  15. 29 CFR 1910.27 - Fixed ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) All rungs shall have a minimum diameter of three-fourths inch for metal ladders, except as covered in... appurtenances shall be painted or otherwise treated to resist corrosion and rusting when location demands... areas under floors, are frequently located in an atmosphere that causes corrosion and rusting. To...

  16. 16 CFR 1207.5 - Design.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... pool slide shall be such that no structural failures of any component part shall cause failures of any... such fasteners shall not cause a failure of the tread under the ladder loading conditions specified in... without failure or permanent deformation. (d) Handrails. Swimming pool slide ladders shall be equipped...

  17. 16 CFR 1207.5 - Design.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... pool slide shall be such that no structural failures of any component part shall cause failures of any... such fasteners shall not cause a failure of the tread under the ladder loading conditions specified in... without failure or permanent deformation. (d) Handrails. Swimming pool slide ladders shall be equipped...

  18. Teacher Attitudes toward Career Ladder.

    ERIC Educational Resources Information Center

    Dickson, LouAnn

    An evaluation of teacher attitudes toward a public schools career ladder program is presented. Survey questionnaires mailed to 3,239 administrators, nonprogram teachers, and participating teachers elicited 1,683 returns for a 52 percent response rate. Findings indicate that the majority of teachers favored continuation of the career ladder…

  19. 29 CFR 1926.1053 - Ladders.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ascend or descend without continually having to hold, push or pull any part of the device, leaving both... the carrier. When the system is exposed to wind, cable guides for flexible carriers shall be installed... mountings and cable guides shall not reduce the design strength of the ladder. (24) The side rails of...

  20. 29 CFR 1926.1053 - Ladders.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ascend or descend without continually having to hold, push or pull any part of the device, leaving both... the carrier. When the system is exposed to wind, cable guides for flexible carriers shall be installed... mountings and cable guides shall not reduce the design strength of the ladder. (24) The side rails of...

  1. Tank 188A, detail of valves, pipes, and top access ladder ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Tank 188-A, detail of valves, pipes, and top access ladder on east side. Ordnance warehouse A-199 is in the far distance. View to south. - Mare Island Naval Shipyard, Fresh Water Tanks, East of Mesa Road & north of Kieper Road, Vallejo, Solano County, CA

  2. Evaluation Practice and Theory: Up and down the Ladder of Abstraction

    ERIC Educational Resources Information Center

    Leviton, Laura C.

    2015-01-01

    Debra Rog presented the 2014 Eleanor Chelimsky Forum address, offering ways to integrate evaluation theory and practice by abundant use of practice examples. These examples illustrate the effective use of the Ladder of Abstraction from semantics, working from the concrete to the abstract and back again.

  3. Avionics Instrument Systems Specialist Career Ladder: AFSCs 32531, 32551, 31571, and 32591. Occupational Survey Report.

    ERIC Educational Resources Information Center

    Air Force Occupational Measurement Center, Lackland AFB, TX.

    The Avionics Instrument Systems career ladder (AFSC 325X1) provides flight line and shop maintenance training on aircraft instrument systems, electromechancial instruments, components, and test equipment. Duties involve inspecting, removing, installing, repairing, operating, troubleshooting, overhauling, and modifying systems such as flight and…

  4. Educational and Contractual Attributes of the Apprenticeship Programmes of Large Employers in Britain

    ERIC Educational Resources Information Center

    Ryan, Paul; Gospel, Howard; Lewis, Paul

    2006-01-01

    The authors consider two quality-related aspects of large employers' apprenticeship programmes. The first is their contribution to national educational objectives, including the creation and strengthening of ladders of vocational attainment. Such ladders already exist in apprenticeship's traditional domains, but the prospects for their wider…

  5. Ladders and Easels and Stools, Oh My!

    ERIC Educational Resources Information Center

    Greenman, Geri

    2002-01-01

    Describes an art lesson for high school seniors in an intermediate oil painting class. Explains that the teacher set up a still life with a ladder, easel, and a stool with a white background to capture the shadows. States that the students painted their still life in oil. (CMK)

  6. Undergraduate Education: An Essential Rung on the Rehabilitation Career Ladder

    ERIC Educational Resources Information Center

    Evenson, Tom; Holloway, Linda

    2007-01-01

    This article presents the historical pertinence of undergraduate education to developing a career ladder within the field of vocational rehabilitation. Support for the relevance is presented through the results of an investigation of baccalaureate-level competence and preparation as perceived by graduates of rehabilitation services programs. Job…

  7. Analysis of Utah Career Ladder Plans.

    ERIC Educational Resources Information Center

    Murphy, Michael J.; And Others

    This report analyzes the content and development of the 45 school district career ladder plans submitted in 1984 to the Utah State Office of Education. Descriptive commentary and data tables are used to examine (1) the structure and composition of planning committees; (2) teacher evaluation provisions, including changes in evaluation methods, the…

  8. Understanding Phylogenies in Biology: The Influence of a Gestalt Perceptual Principle

    ERIC Educational Resources Information Center

    Novick, Laura R.; Catley, Kefyn M.

    2007-01-01

    Cladograms, hierarchical diagrams depicting evolutionary histories among (groups of) species, are commonly drawn in 2 informationally equivalent formats--tree and ladder. The authors hypothesize that these formats are not computationally equivalent because the Gestalt principle of good continuation obscures the hierarchical structure of ladders.…

  9. Parents' Participation on School Councils Analysed through Arnstein's Ladder of Participation

    ERIC Educational Resources Information Center

    Stelmach, Bonnie

    2016-01-01

    Although parent school councils are the archetypal arrangement for engaging parents in school improvement planning, their effectiveness is negligible when it comes to building parents' capacity for and confidence in educational decision-making. Using Arnstein's ladder of citizen participation, this qualitative case study investigated the nature…

  10. Ground Radio Operator Career Ladder AFSC 293X3.

    DTIC Science & Technology

    1981-07-01

    formal resident training, OJT, and ,her Air Force management decisions . The structure of jobs within the Ground ! odio Operatoi career ladder was...33 ADJUST ANTENNA TUNING UNITS 33 TYPE RECORDS, REPORTS, OR FORMS :33 OPERATE AUXILLARY GENERATORS 33 A8 ’iT’ TASKS PERFORMED BY SUPERVISORS AND

  11. Ladder physics in the spin fermion model

    DOE PAGES

    Tsvelik, A. M.

    2017-05-01

    A link is established between the spin fermion (SF) model of the cuprates and the approach based on the analogy between the physics of doped Mott insulators in two dimensions and the physics of fermionic ladders. This enables one to use nonperturbative results derived for fermionic ladders to move beyond the large-N approximation in the SF model. Here, it is shown that the paramagnon exchange postulated in the SF model has exactly the right form to facilitate the emergence of the fully gapped d-Mott state in the region of the Brillouin zone at the hot spots of the Fermi surface.more » Hence, the SF model provides an adequate description of the pseudogap.« less

  12. Proceedings of an Occupational Analysis Seminar Held at Canberra, Australia, 17-20 September 1979.

    DTIC Science & Technology

    1979-09-01

    stripes a man wears. NO CATEGORY EXAMPLE 48 Career Fields Medical (28 Ladders) 334 Career Ladders Pharmacy 1000+ Specialties . Pharmacist Specialist... uty /Task and Task Factor i TABLE 1, Summaries i 3. The Data Prepatory Programmes take the raw optical scanned or key punched data and: a. re-organize

  13. 46 CFR 108.540 - Survival craft muster and embarkation arrangements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.540 Survival craft muster and... minutes from the time the instruction to board is given. (e) Each davit-launched and free-fall survival... ladder as follows: (1) Each embarkation ladder must be approved under approval series 160.117 or be a...

  14. Fiscal Viability, Conjunctive and Compensatory Models, and Career-Ladder Decisions: An Empirical Investigation.

    ERIC Educational Resources Information Center

    Mehrens, William A.; And Others

    A study was undertaken to explore cost-effective ways of making career ladder teacher evaluation system decisions based on fewer measures, assessing the relationship of observational variables to other data and final decisions, and comparison of compensatory and conjunctive decision models. Data included multiple scores from eight data sources in…

  15. Career Ladders and the Professionalization of Teaching: Down the Up Staircase.

    ERIC Educational Resources Information Center

    Dunwell, Robert R.

    School systems interested in improving teacher performance, effectiveness, and job satisfaction while reducing turnover rates might do better to seek ways to enhance the intrinsic rewards of teaching rather than implement such extrinsic motivators as merit pay plans and career ladders. A review of the research literature brings several important…

  16. 29 CFR 1915.72 - Ladders.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... sectional area of the side rail. The dimensions of side rails for their total length shall be those...). (b) Construction of portable wood cleated ladders up to 30 feet in length. (1) Wood side rails shall... than one such pocket appears in each 4 feet of length. (5) The width between side rails at the base...

  17. Television Equipment Repair Career Ladder. Occupational Survey Report.

    ERIC Educational Resources Information Center

    Air Force Occupational Measurement Center, Lackland AFB, TX.

    The report describes the results of an Air Force occupational survey of the television equipment repair career ladder. A job inventory, administered to 808 job incumbents, consisted of a background information section and a duty-task list designed to assess the relative amount of time spent on tasks performed in current jobs. The resulting…

  18. Implications of the Texas Mandate for Comprehensive Performance Appraisal.

    ERIC Educational Resources Information Center

    Nelson, David; And Others

    This paper: (1) describes the recently implemented Texas plan for school reform; (2) delineates a major component of Texas reform, the career ladder. In response to a nationwide call for raised educational standards, Texas passed HB 72, a comprehensive education bill implementing a comprehensive "career ladder" model for the testing,…

  19. Integrating stand density management with fuel reduction

    Treesearch

    Joseph W. Sherlock

    2007-01-01

    The widespread effort to reduce fuel hazards in western forested ecosystems places significant emphasis on surface and small ladder fuels. Changes in canopy density, for purposes of either reducing potential crown fire impacts or insect/pathogen-related mortality, are less frequently considered. Providing a sound basis for treating more than surface and small ladder...

  20. 46 CFR 160.017-27 - Production tests and examination.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Production tests and examination. 160.017-27 Section 160.017-27 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-27 Production tests and examination. (a) General. Each ladder...

  1. 46 CFR 160.017-27 - Production tests and examination.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Production tests and examination. 160.017-27 Section 160.017-27 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-27 Production tests and examination. (a) General. Each ladder...

  2. 46 CFR 160.017-21 - Approval tests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Approval tests. 160.017-21 Section 160.017-21 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-21 Approval tests. (a) General. Each approval test must be conducted on a ladder...

  3. 46 CFR 160.017-21 - Approval tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Approval tests. 160.017-21 Section 160.017-21 Shipping...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-21 Approval tests. (a) General. Each approval test must be conducted on a ladder of the longest length for which approval has been requested. If...

  4. 46 CFR 72.10-45 - Weather deck communications.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Weather deck communications. 72.10-45 Section 72.10-45... ARRANGEMENT Means of Escape § 72.10-45 Weather deck communications. (a) Vertical communication shall be provided between the various weather decks by means of permanent inclined ladders. Where ladders are for...

  5. 46 CFR 72.10-45 - Weather deck communications.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 3 2012-10-01 2012-10-01 false Weather deck communications. 72.10-45 Section 72.10-45... ARRANGEMENT Means of Escape § 72.10-45 Weather deck communications. (a) Vertical communication shall be provided between the various weather decks by means of permanent inclined ladders. Where ladders are for...

  6. 46 CFR 72.10-45 - Weather deck communications.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Weather deck communications. 72.10-45 Section 72.10-45... ARRANGEMENT Means of Escape § 72.10-45 Weather deck communications. (a) Vertical communication shall be provided between the various weather decks by means of permanent inclined ladders. Where ladders are for...

  7. 46 CFR 72.10-45 - Weather deck communications.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Weather deck communications. 72.10-45 Section 72.10-45... ARRANGEMENT Means of Escape § 72.10-45 Weather deck communications. (a) Vertical communication shall be provided between the various weather decks by means of permanent inclined ladders. Where ladders are for...

  8. 46 CFR 72.10-45 - Weather deck communications.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 3 2013-10-01 2013-10-01 false Weather deck communications. 72.10-45 Section 72.10-45... ARRANGEMENT Means of Escape § 72.10-45 Weather deck communications. (a) Vertical communication shall be provided between the various weather decks by means of permanent inclined ladders. Where ladders are for...

  9. 29 CFR 1915.72 - Ladders.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... shipbreaking. (a) General requirements. (1) The use of ladders with broken or missing rungs or steps, broken or... 10d common wire nails or fastened with through bolts or other fasteners of equivalent strength. Cleats... nailed to each rail with five 10d common wire nails or fastened with through bolts or other fasteners of...

  10. 29 CFR 1918.24 - Fixed and portable ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., and be positively secured or held against shifting or slipping. When conditions are such that a... strength shall be furnished and positively secured or held against shifting or slipping while in use. Steps... securely positioned on a level and firm base. (2) Ladders shall be fitted with slip-resistant bases and/or...

  11. 29 CFR 1918.24 - Fixed and portable ladders.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., and be positively secured or held against shifting or slipping. When conditions are such that a... strength shall be furnished and positively secured or held against shifting or slipping while in use. Steps... securely positioned on a level and firm base. (2) Ladders shall be fitted with slip-resistant bases and/or...

  12. 29 CFR 1918.24 - Fixed and portable ladders.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., and be positively secured or held against shifting or slipping. When conditions are such that a... strength shall be furnished and positively secured or held against shifting or slipping while in use. Steps... securely positioned on a level and firm base. (2) Ladders shall be fitted with slip-resistant bases and/or...

  13. 29 CFR 1918.24 - Fixed and portable ladders.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., and be positively secured or held against shifting or slipping. When conditions are such that a... strength shall be furnished and positively secured or held against shifting or slipping while in use. Steps... securely positioned on a level and firm base. (2) Ladders shall be fitted with slip-resistant bases and/or...

  14. 29 CFR 1918.24 - Fixed and portable ladders.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., and be positively secured or held against shifting or slipping. When conditions are such that a... strength shall be furnished and positively secured or held against shifting or slipping while in use. Steps... securely positioned on a level and firm base. (2) Ladders shall be fitted with slip-resistant bases and/or...

  15. Ladder-Type Circuits Revisited

    ERIC Educational Resources Information Center

    Yoon, Sung Hyun

    2007-01-01

    Ladder-type circuits where a given unit is repeated infinitely many times are dealt with in many textbooks on electromagnetism as examples of filter circuits. Determining the impedance of such circuits seems to be regarded as simple, which may be due to the fact that the invariance of the infinite system under the operation of adding one more unit…

  16. Literature Ladders: Linking Books and Internet Resources.

    ERIC Educational Resources Information Center

    Lamb, Annette

    2001-01-01

    Describes Literature Learning Ladders, a project that uses books for children and young adults as the focal point for technology-rich thematic activities. Explains the use of Internet Web sites to find book information as well as sties that demonstrate how resources can be used as part of technology-based classroom activities. (LRW)

  17. 46 CFR 160.017-21 - Approval tests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Approval tests. 160.017-21 Section 160.017-21 Shipping...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-21 Approval tests. (a) General. Each approval test must be conducted on a ladder of the longest length for which approval has been requested. If...

  18. A Statewide Decentralized Approach to Public School Reform: The Case of Career Ladders in Utah.

    ERIC Educational Resources Information Center

    Malen, Betty; Murphy, Michael J.

    1985-01-01

    In 1984, the Utah legislature enacted a career ladder bill encouraging all local districts to develop plans for restructuring teachers' compensation and promotion options. An independent, bipartisan taskforce then created a statewide, decentralized model that increases educators' power, minimizes merit and staff differentiation, and fosters…

  19. Exposure to sub-acute doses of fipronil and buprofezin in combination or alone induces biochemical, hematological, histopathological and genotoxic damage in common carp (Cyprinus carpio L.).

    PubMed

    Qureshi, Irfan Zia; Bibi, Asia; Shahid, Sana; Ghazanfar, Madiha

    2016-10-01

    Use of pesticides or insecticides can be highly toxic to aquatic life forms due to leaching and agricultural runoff, rains or flood. Fipronil (FP) is a GABA receptor inhibitor, while buprofezin (BPFN) is an insect growth regulator. Presently, we exposed groups of aquaria acclimated carp fish (Cyprinus carpio) for 96h to sub-lethal concentrations of fipronil (400μgL(-1); 9.15×10(-7)molL(-1)) and buprofezin (BPFN, 100mgL(-1); 1.072×10(-6)molL(-1)) singly or in combination. The extent of damage was assessed at biochemical, hematological, molecular biological and histopathological level. Results obtained in treated fish were compared statistically with those of control non-treated fish and also among treatment groups. Significance level was p<0.05. Compared to control, serum total protein and globulin concentrations decreased significantly (p<0.0001) in fish treated with FP; while albumin concentration remained unaltered with all treatments. Glucose concentration decreased significantly (p<0.002) in fish treated with FP. In contrast, combined FP+BPFN treatment and BPFN treatment caused insignificant elevation of glucose concentration. Hematological assessment demonstrated significant decrease in red blood cell and thrombocyte counts, hemoglobin concentration and hematocrit percent; while white blood cell count showed an increase in all treatment groups (p<0.0001). Blood smears from pesticide treated fish revealed aberrant erythrocyte morphologies which included necrosis, micronuclear formation and hyperchromatosis. DNA laddering assay carried out on whole blood demonstrated excessive smear formation in combined FP+BPFN and BPFN treatment groups but no smear formation was noticeable in FP treated fish. Compared to control, whole blood DNA content increased significantly in the combined FP+BPFN and BPFN treatment groups (p<0.001 and p<0.009). With all treatments histopathological changes observed in the gills were: epithelial uplifting and necrosis of lamellae, lamellar atrophy, disruption of cartilaginous core, fusion and disorganization of lamellae and telangiectasia. In liver these were: karyorrhexis, hepatocellular hypertrophy, nuclear hypertrophy, melanomacrophage aggregates and central vein contraction, while in the kidney: deterioration of glomerulus and dilatation of Bowman's space, dilatation of renal tubules, thyroidisation, altered tubular lumen, nuclear hypertrophy, cellular atrophy, and cellular necrosis were the outcome. Our study revealed that FP and BPFN produce highly toxic effects on fish when given in combination or singly. To our knowledge, this is the first report on toxicity caused by FP and BPFN in single and combined state. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Strength Analysis on Ship Ladder Using Finite Element Method

    NASA Astrophysics Data System (ADS)

    Budianto; Wahyudi, M. T.; Dinata, U.; Ruddianto; Eko P., M. M.

    2018-01-01

    In designing the ship’s structure, it should refer to the rules in accordance with applicable classification standards. In this case, designing Ladder (Staircase) on a Ferry Ship which is set up, it must be reviewed based on the loads during ship operations, either during sailing or at port operations. The classification rules in ship design refer to the calculation of the structure components described in Classification calculation method and can be analysed using the Finite Element Method. Classification Regulations used in the design of Ferry Ships used BKI (Bureau of Classification Indonesia). So the rules for the provision of material composition in the mechanical properties of the material should refer to the classification of the used vessel. The analysis in this structure used program structure packages based on Finite Element Method. By using structural analysis on Ladder (Ladder), it obtained strength and simulation structure that can withstand load 140 kg both in static condition, dynamic, and impact. Therefore, the result of the analysis included values of safety factors in the ship is to keep the structure safe but the strength of the structure is not excessive.

  1. Electronic structure and magnetic properties of the strong-rung spin-1 ladder compound Rb3Ni2(NO3)7

    NASA Astrophysics Data System (ADS)

    Pchelkina, Z. V.; Mazurenko, V. V.; Volkova, O. S.; Deeva, E. B.; Morozov, I. V.; Shutov, V. V.; Troyanov, S. I.; Werner, J.; Koo, C.; Klingeler, R.; Vasiliev, A. N.

    2018-04-01

    Rb3Ni2(NO3)7 was obtained by crystallization from anhydrous nitric acid solution of rubidium nitrate and nickel nitrate hexahydrate. The crystal structure determined on single crystals implies isolated spin-1 two-leg ladders of Ni2 + ions connected by (NO3)- groups as basic elements. Magnetic susceptibility, specific heat in magnetic fields up to 9 T, magnetization, and high-frequency electron spin resonance studies performed on powder samples show the absence of long-range magnetic order at T ≥2 K. Electronic structure calculations and the detailed analysis of the experimental data enable quantitative estimates of the relevant parameters of the S =1 ladders in Rb3Ni2(NO3)7 . The rung coupling J1=10.16 K, the leg coupling J2=1.5 K, and the Ising-type anisotropy |A |=8.6 K are obtained. The scenario of a valence-bond solidlike quantum ground state realized in the two-leg Ni2 + ladders is further corroborated by model simulations of the magnetic susceptibility.

  2. Ultra-wideband ladder filter using SH(0) plate wave in thin LiNbO(3) plate and its application to tunable filter.

    PubMed

    Kadota, Michio; Tanaka, Shuji

    2015-05-01

    A cognitive radio terminal using vacant frequency bands of digital TV (DTV) channels, i.e., TV white space, strongly requires a compact tunable filter covering a wide frequency range of the DTV band (470 to 710 MHz in Japan). In this study, a T-type ladder filter using ultra-wideband shear horizontal mode plate wave resonators was fabricated, and a low peak insertion loss of 0.8 dB and an ultra-large 6 dB bandwidth of 240 MHz (41%) were measured in the DTV band. In addition, bandpass filters with different center frequencies of 502 and 653 MHz at 6 dB attenuation were numerically synthesized based on the same T-type ladder filter in conjunction with band rejection filters with different frequencies. The results suggest that the combination of the wideband T-type ladder filter and the band rejection filters connected with variable capacitors enables a tunable filter with large tunability of frequency and bandwidth as well as large rejection at the adjacent channels of an available TV white space.

  3. SU(3)_C× SU(2)_L× U(1)_Y( × U(1)_X ) as a symmetry of division algebraic ladder operators

    NASA Astrophysics Data System (ADS)

    Furey, C.

    2018-05-01

    We demonstrate a model which captures certain attractive features of SU(5) theory, while providing a possible escape from proton decay. In this paper we show how ladder operators arise from the division algebras R, C, H, and O. From the SU( n) symmetry of these ladder operators, we then demonstrate a model which has much structural similarity to Georgi and Glashow's SU(5) grand unified theory. However, in this case, the transitions leading to proton decay are expected to be blocked, given that they coincide with presumably forbidden transformations which would incorrectly mix distinct algebraic actions. As a result, we find that we are left with G_{sm} = SU(3)_C× SU(2)_L× U(1)_Y / Z_6. Finally, we point out that if U( n) ladder symmetries are used in place of SU( n), it may then be possible to find this same G_{sm}=SU(3)_C× SU(2)_L× U(1)_Y / Z_6, together with an extra U(1)_X symmetry, related to B-L.

  4. Don/doff support stand for use with rear entry space suits

    NASA Technical Reports Server (NTRS)

    Kosmo, Joseph J. (Inventor); Tri, Terry O. (Inventor); Spenny, William E. (Inventor); West, Philip R. (Inventor)

    1988-01-01

    A don/doff support stand for use with rear entry space suits is disclosed. The support stand is designed for use in one-g environments; however, certain features of the stand can be used on future spacecraft, lunar, or planetary bases. The present invention has a retainer which receives a protrucing lug fixed on the torso section of the space suit. When the lug is locked in the retainer, the space suit is held in a generally upright position. In a one-g environment a portable ladder is positioned adjacent to the rear entry of the space suit supported by the stand. The astronaut climbs up the ladder and grasps a hand bar assembly positioned above the rear entry. The astronaut then slips his legs through the open rear entry and down into the abdominal portion of the suite. The astronaut then lowers himself fully into the suit. The portable ladder is then removed and the astronaut can close the rear entry door. The lug is then disengaged from the retainer and the astronaut is free to engage in training exercises in the suit. When suit use is over, the astronaut returns to the stand and inserts the lug into the retainer. A technician repositions the ladder. The astronaut opens the rear entry door, grasps the hand bar assembly and does a chin-up to extricate himself from the suit. The astronaut climbs down the movable ladder while the suit is supported by the stand.

  5. Don/Doff support stand for use with rear entry space suits

    NASA Technical Reports Server (NTRS)

    Kosmo, Joseph J. (Inventor); Tri, Terry O. (Inventor); Spenny, William E. (Inventor); West, Philip R. (Inventor)

    1989-01-01

    A don/doff support stand for use with rear entry space suits is disclosed. The support stand is designed for use in one-g environments; however, certain features of the stand can be used on future space-craft, lunar or planetary bases. The present invention has a retainer which receives a protruding lug fixed on the torso section of the space suit. When the lug is locked in the retainer, the space suit is held in a generally upright position. In a one-g environment a portable ladder is positioned adjacent to the rear entry of the space suit supported by the stand. The astronaut climbs up the ladder and grasps a hand bar assembly positioned above the rear entry. The astronaut then slips his legs through the open rear entry and down into the abdominal portion of the suit. The astronaut then lowers himself fully into the suit. The portable ladder is then removed and the astronaut can close the rear entry door. The lug is then disengaged from the retainer and the astronaut is free to engage in training exercises in the suit. When suit use is over, the astronaut returns to the stand and inserts the lug into the retainer. A technician repositions the ladder. The astronaut opens the rear entry door, grasps the hand bar assembly and does a chin-up to extricate himself from the suit. The astronaut climbs down the movable ladder while the suit is supported by the stand.

  6. Healthcare organization-education partnerships and career ladder programs for health care workers.

    PubMed

    Dill, Janette S; Chuang, Emmeline; Morgan, Jennifer C

    2014-12-01

    Increasing concerns about quality of care and workforce shortages have motivated health care organizations and educational institutions to partner to create career ladders for frontline health care workers. Career ladders reward workers for gains in skills and knowledge and may reduce the costs associated with turnover, improve patient care, and/or address projected shortages of certain nursing and allied health professions. This study examines partnerships between health care and educational organizations in the United States during the design and implementation of career ladder training programs for low-skill workers in health care settings, referred to as frontline health care workers. Mixed methods data from 291 frontline health care workers and 347 key informants (e.g., administrators, instructors, managers) collected between 2007 and 2010 were analyzed using both regression and fuzzy-set qualitative comparative analysis (QCA). Results suggest that different combinations of partner characteristics, including having an education leader, employer leader, frontline management support, partnership history, community need, and educational policies, were necessary for high worker career self-efficacy and program satisfaction. Whether a worker received a wage increase, however, was primarily dependent on leadership within the health care organization, including having an employer leader and employer implementation policies. Findings suggest that strong partnerships between health care and educational organizations can contribute to the successful implementation of career ladder programs, but workers' ability to earn monetary rewards for program participation depends on the strength of leadership support within the health care organization. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Evaluation of Five Tests for Sensitivity to Functional Deficits following Cervical or Thoracic Dorsal Column Transection in the Rat

    PubMed Central

    Eggers, Ruben; Tuinenbreijer, Lizz; Kouwenhoven, Dorette; Verhaagen, Joost; Mason, Matthew R. J.

    2016-01-01

    The dorsal column lesion model of spinal cord injury targets sensory fibres which originate from the dorsal root ganglia and ascend in the dorsal funiculus. It has the advantages that fibres can be specifically traced from the sciatic nerve, verifiably complete lesions can be performed of the labelled fibres, and it can be used to study sprouting in the central nervous system from the conditioning lesion effect. However, functional deficits from this type of lesion are mild, making assessment of experimental treatment-induced functional recovery difficult. Here, five functional tests were compared for their sensitivity to functional deficits, and hence their suitability to reliably measure recovery of function after dorsal column injury. We assessed the tape removal test, the rope crossing test, CatWalk gait analysis, and the horizontal ladder, and introduce a new test, the inclined rolling ladder. Animals with dorsal column injuries at C4 or T7 level were compared to sham-operated animals for a duration of eight weeks. As well as comparing groups at individual timepoints we also compared the longitudinal data over the whole time course with linear mixed models (LMMs), and for tests where steps are scored as success/error, using generalized LMMs for binomial data. Although, generally, function recovered to sham levels within 2–6 weeks, in most tests we were able to detect significant deficits with whole time-course comparisons. On the horizontal ladder deficits were detected until 5–6 weeks. With the new inclined rolling ladder functional deficits were somewhat more consistent over the testing period and appeared to last for 6–7 weeks. Of the CatWalk parameters base of support was sensitive to cervical and thoracic lesions while hind-paw print-width was affected by cervical lesion only. The inclined rolling ladder test in combination with the horizontal ladder and the CatWalk may prove useful to monitor functional recovery after experimental treatment in this lesion model. PMID:26934672

  8. Teacher Bonuses for Extra Work: A Profile of Missouri's Career Ladder Program

    ERIC Educational Resources Information Center

    Silman, Timothy; Glazerman, Steven

    2009-01-01

    This report set out to profile the Missouri Career Ladder program by delving beneath the surface and comparing how the program works in practice (based on stakeholder accounts) with how it works in theory (based on published statutes and regulations). The authors found that in many respects the program operates as one might expect. Districts…

  9. A Demonstration of Helping Adolescents with Mild Intellectual Disability Climb Ladders

    ERIC Educational Resources Information Center

    Chan, Kok Hoe Anthony; Varahan, Jayashree Lakshmi; Loh, Peng Loong Daniel; Tan, Sey Ing

    2011-01-01

    A research team at a vocational school in Singapore, catering mainly to students between the ages of 17-21 with mild intellectual disability, studied how to best address the challenge of enabling students to learn how to climb ladders (a skill necessary at many job placements). They documented the approach used and suggested extrapolations and…

  10. South Dakota Statewide Core Curriculum, Career Ladder and Challenge System: Volumes I and II. Final Report.

    ERIC Educational Resources Information Center

    1975

    The two volume final report of the South Dakota Statewide Core Curriculum, Career Ladder, and Challenge System Project, coordinating associated health and nursing education on a statewide basis to achieve a more systematic production and utilization of health manpower, is presented. Volume 1 includes five chapters: (1) and (2) outlining funding…

  11. Educational Characteristics of Paraprofessionals in Southern California: A Survey of Their Career Ladder Needs.

    ERIC Educational Resources Information Center

    Ochoa, Alberto M.; Wright, Pamela G.

    The purpose of this study was to identify the career ladder needs of paraprofessionals as required by both California State and Federal educational mandates. Findings, gathered by questionnaires returned by 594 aides in seven southern and central Californian counties, are discussed in terms of the following: (1) personal characteristics; (2)…

  12. Chutes and Ladders for the Impatient

    ERIC Educational Resources Information Center

    Cheteyan, Leslie A.; Hengeveld, Stewart; Jones, Michael A.

    2011-01-01

    In this paper, we review the rules and game board for "Chutes and Ladders", define a Markov chain to model the game regardless of the spinner range, and describe how properties of Markov chains are used to determine that an optimal spinner range of 15 minimizes the expected number of turns for a player to complete the game. Because the Markov…

  13. Astronaut Alan Bean steps from ladder of Lunar Module for EVA

    NASA Technical Reports Server (NTRS)

    1969-01-01

    Astronaut Alan L. Bean, lunar module pilot for the Apollo 12 lunar landing mission, steps from the ladder of the Lunar Module to join Astronaut Charles Conrad Jr., commander, in extravehicular activity on November 19, 1969. Astronaut Ricard F. Gordon Jr., command module pilot, remained with the Command/Service Modules in lunar orbit.

  14. DETAIL VIEW ON THE MAIN ASSEMBLY LEVEL OF A LADDER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW ON THE MAIN ASSEMBLY LEVEL OF A LADDER TO THE CATWALK AT COLUMN LINE AA-28 SHOWING VERTICAL MECHANICAL DUCT, RETURN AIR FLOOR GRILLE, STEEL INDUSTRIAL SASH WINDOWS AND CROSS BRACING OF SOUTH WALL. - Offutt Air Force Base, Glenn L. Martin-Nebraska Bomber Plant, Building D, Peacekeeper Drive, Bellevue, Sarpy County, NE

  15. Development of Physical Demand Profiles for Four Airman Career Ladders. Interim Report for Period 1 July 1972-1 November 1974.

    ERIC Educational Resources Information Center

    Koym, Kenneth G.

    The document investigates certain physical characteristics of airman occupations in terms of the dexterity, muscular coordination, and sensory discrimination required. It examines the feasibility of estimating physical demands in jobs using incumbent ratings and compares physical demand profiles for four career ladders: (1) avionic instrument…

  16. A "Career Ladder" Approach to Junior College Curriculum.

    ERIC Educational Resources Information Center

    Schrupp, Harold A.

    More attention should be paid to the building of career guidance and career curriculum programs with exit points that enable the student to seek employment at any time in an entry level position and/or to continue his education. Some of the best "career ladder" programs are the federally sponsored New Career programs. A number of the…

  17. 46 CFR 188.10-56 - Pilot boarding equipment and point of access.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pilot boarding equipment and point of access. 188.10-56... VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 188.10-56 Pilot boarding equipment and point of access. (a) Pilot boarding equipment means a pilot ladder, accomodation ladder, pilot...

  18. Schroedinger operators with the q-ladder symmetry algebras

    NASA Technical Reports Server (NTRS)

    Skorik, Sergei; Spiridonov, Vyacheslav

    1994-01-01

    A class of the one-dimensional Schroedinger operators L with the symmetry algebra LB(+/-) = q(+/-2)B(+/-)L, (B(+),B(-)) = P(sub N)(L), is described. Here B(+/-) are the 'q-ladder' operators and P(sub N)(L) is a polynomial of the order N. Peculiarities of the coherent states of this algebra are briefly discussed.

  19. Microwave-induced three-photon coherence of Rydberg atomic states

    NASA Astrophysics Data System (ADS)

    Kwak, Hyo Min; Jeong, Taek; Lee, Yoon-Seok; Moon, Han Seb

    2016-12-01

    We investigate the three-photon coherence (TPC) effects of the Rydberg state in a Doppler-broadened four-level ladder-type atomic system for the 5S1/2(F=3)-5P3/2(F‧=4)-50D5/2-51P3/2 transition of 85Rb atoms. Upon interaction of the Rydberg Rb atom of the ladder-type electromagnetically induced transparency (EIT) scheme with a resonant microwave (MW) field, we numerically analyze the spectral features of the Rydberg TPC from two viewpoints, Autler-Townes splitting (AT-splitting) of the Rydberg EIT and three-photon electromagnetically induced absorption (TPEIA). We determine the criterion to differentiate between AT-splitting of the Rydberg EIT and TPEIA in the Doppler-broadened ladder-type atomic system.

  20. Electron spin resonance modes in a strong-leg ladder in the Tomonaga-Luttinger liquid phase

    NASA Astrophysics Data System (ADS)

    Ozerov, M.; Maksymenko, M.; Wosnitza, J.; Honecker, A.; Landee, C. P.; Turnbull, M. M.; Furuya, S. C.; Giamarchi, T.; Zvyagin, S. A.

    2015-12-01

    Magnetic excitations in the strong-leg quantum spin ladder compound (C7H10N) 2CuBr4 (known as DIMPY) in the field-induced Tomonaga-Luttinger spin-liquid phase are studied by means of high-field electron spin resonance (ESR) spectroscopy. The presence of a gapped ESR mode with unusual nonlinear frequency-field dependence is revealed experimentally. Using a combination of analytic and exact-diagonalization methods, we compute the dynamical structure factor and identify this mode with longitudinal excitations in the antisymmetric channel. We argue that these excitations constitute a fingerprint of the spin dynamics in a strong-leg spin-1/2 Heisenberg antiferromagnetic ladder and owe their ESR observability to the uniform Dzyaloshinskii-Moriya interaction.

  1. Teachers' Career Ladder Policy in Ethiopia: An Opportunity for Professional Growth or ''a Stick Disguised as a Carrot?''

    ERIC Educational Resources Information Center

    Tekleselassie, Abebayehu A.

    2005-01-01

    In response to the ever-declining status of the teaching profession, and its adverse effects on the country's educational system, the Federal Ministry of Education in Ethiopia introduced a policy of the teachers' career ladder in 1994. While reformers believe that the introduction of the policy has improved the condition of the teaching…

  2. Dental Laboratory Career Ladder (AFSC 4Y1X1)

    DTIC Science & Technology

    1994-08-01

    analysis identified one job cluster and seven jobs: Base Dental Lab cluster, Orthodontic Appliance Fabricator job, Fixed Restoration Fabricator job, Crown...reline and repair, removable partial denture construction, crown and fixed partial denture construction, fabrication of orthodontic appliances, and...specialized prostheses. Preventive maintenance and safety precautions for dental laboratory equipment are also stressed . Entry into the career ladder

  3. South Dakota Statewide Core Curriculum, Career Ladder, and Challenge System. A Case History.

    ERIC Educational Resources Information Center

    Brekke, Donald G.; Gildseth, Wayne M.

    The South Dakota Core Curriculum Project involving the career ladder approach to health manpower training, which began in 1970, had seven objectives including the following: (1) To organize a Health Manpower Council for the entire State; (2) to define the areas of basic commonality among the various training programs; and (3) to develop a core…

  4. Knowing One's Lot in Life versus Climbing the Social Ladder: The Formation of Redistributive Preferences in Urban China

    ERIC Educational Resources Information Center

    Smyth, Russell; Mishra, Vinod; Qian, Xiaolei

    2010-01-01

    This paper examines, how individual preferences for redistribution in general and redistribution to improve access to education, improve social protection for the poor, reduce income inequality and reduce unemployment depend on beliefs about what determines one's lot in life and self-assessed prospects for climbing the social ladder in urban…

  5. 29 CFR 1915.74 - Access to vessels.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... rigged at the foot of the gangway in such a manner as to prevent employees from falling from the end of the gangway. (7) If the foot of the gangway is more than one foot away from the edge of the apron, the... this section. (d) Jacob's ladders. (1) Jacob's ladders shall be of the double rung or flat tread type...

  6. Shaping Tennessee's Career Ladder Program--1985. Part 2: Improving Teacher Quality through Incentives Project.

    ERIC Educational Resources Information Center

    Hadler, Janet R.; Carlson, Deborah L.

    Outcomes of Tennessee's Career Ladder Program are presented in this report, with a focus on the early implementation stage and perceptions of teachers and administrators. Methodology involved two sets of interviews with participating teachers and administrators from 18 schools and a statewide survey of 1,039 out of 2,105 faculty from 54 schools.…

  7. A Phenomenological Examination of Virtual Game Developers' Experiences Using Jacob's Ladder Pre-Production Design Tactic

    ERIC Educational Resources Information Center

    Brown-Turner, Jasmine

    2017-01-01

    Edutainment refers to curriculum and instruction designed with a clear educational purpose, including multi-faceted virtual learning game design. Tools such as the Jacob's Ladder pre-production design tactic have been developed to ensure that voices of both engineers and educators are heard. However, it is unclear how development team members…

  8. Dynamics of a Sliding Ladder Leaning against a Wall

    ERIC Educational Resources Information Center

    Oliveira, J. B.; Simeão Carvalho, P.; Mota, M. F.; Quintas, M. J.

    2015-01-01

    This study is about the dynamics of a sliding ladder leaning against a vertical wall. The results are understood by considering the motion divided in two parts: (i) for 0 = t = t[subscript s] with one degree of freedom, and (ii) for t > t[subscript s] with two degrees of freedom, where the separation is determined by the instance t[subscript…

  9. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Basso, Benjamin; Dixon, Lance J.

    We use integrability at weak coupling to compute fishnet diagrams for four-point correlation functions in planar Φ 4 theory. Our results are always multilinear combinations of ladder integrals, which are in turn built out of classical polylogarithms. The Steinmann relations provide a powerful constraint on such linear combinations, which leads to a natural conjecture for any fishnet diagram as the determinant of a matrix of ladder integrals.

  10. Convergence and Periodic Solutions for the Input Impedance of a Standard Ladder Network

    ERIC Educational Resources Information Center

    Ucak, C.; Acar, C.

    2007-01-01

    The input impedance of an infinite ladder network is computed by using the recursive relation and by assuming that the input impedance does not change when a new block is added to the network. However, this assumption is not true in general and standard textbooks do not always treat these networks correctly. This paper develops a general solution…

  11. Career Mobility: Implementing the Ladder Concept in Associate Degree and Practical Nursing Curricula.

    ERIC Educational Resources Information Center

    Story, Donna Ketchum

    Designing a career ladder curriculum is not simply taking an existing practical nurse curriculum and an associate degree nursing curriculum and placing one after the other. The curriculum is designed to produce students who are competent practitioners as practical nurses at the end of the first level and then allow them to continue for an…

  12. A Study of Career Ladders and Manpower Development for Non-Management Personnel in the Food Service Industry.

    ERIC Educational Resources Information Center

    State Univ. of New York, Ithaca. School of Hotel Administration at Cornell Univ.

    Because of its failure to provide career ladders for non-management employees, the food service industry is facing increasingly severe manpower shortages and labor turnover. Unnecessary requirements bar entry workers from many jobs, and training opportunities leave much to be desired. This report identifies the problem areas and develops a model…

  13. The snakes and ladders of National Health Service management in England.

    PubMed

    Powell, Martin

    2014-01-01

    This article explores managerial careers in the National Health Service (NHS) through the lens of talent management, particularly focusing on how managers view barriers (snakes) and facilitators (ladders) to career progression. There is a significant literature on enablers and barriers to career progression, but much of this focuses on specific groups such as black and minority ethnic and female workers, and there is relatively little material on the general workforce of the NHS. The research design is a mixed method quantitative (questionnaire) and qualitative (interview and focus group) approach consisting of a quasi-probability element that focuses on a maximum variety sample and a purposive element that seeks policy views at central and strategic health authority level, and examines talent management in high-performing NHS organisations. Ladders are identified as follows: volunteering, secondment, networking, mentoring, academic qualifications, development, good role models/managers and appraisal/personal development plan. Snakes are identified as managing expectations; identity and cognitive diversity; location; sector; NHS toxic and favouritism culture; poor talent spotting; credentialism; exclusive approach to talent; and sustainability. It concludes that while previous conceptual and empirical work is fairly clear on any ladders, it is less clear on snakes. Copyright © 2013 John Wiley & Sons, Ltd.

  14. Variant Alleles, Triallelic Patterns, and Point Mutations Observed in Nuclear Short Tandem Repeat Typing of Populations in Bosnia and Serbia

    PubMed Central

    Huel, René L. M.; Bašić, Lara; Madacki-Todorović, Kamelija; Smajlović, Lejla; Eminović, Izet; Berbić, Irfan; Miloš, Ana; Parsons, Thomas J.

    2007-01-01

    Aim To present a compendium of off-ladder alleles and other genotyping irregularities relating to rare/unexpected population genetic variation, observed in a large short tandem repeat (STR) database from Bosnia and Serbia. Methods DNA was extracted from blood stain cards relating to reference samples from a population of 32 800 individuals from Bosnia and Serbia, and typed using Promega’s PowerPlex®16 STR kit. Results There were 31 distinct off-ladder alleles were observed in 10 of the 15 STR loci amplified from the PowerPlex®16 STR kit. Of these 31 alleles, 3 have not been previously reported. Furthermore, 16 instances of triallelic patterns were observed in 9 of the 15 loci. Primer binding site mismatches that affected amplification were observed in two loci, D5S818 and D8S1179. Conclusion Instances of deviations from manufacturer’s allelic ladders should be expected and caution taken to properly designate the correct alleles in large DNA databases. Particular care should be taken in kinship matching or paternity cases as incorrect designation of any of these deviations from allelic ladders could lead to false exclusions. PMID:17696304

  15. Spin rotational symmetry breaking by orbital current patterns in two-leg Cu-O Hubbard ladders

    NASA Astrophysics Data System (ADS)

    Chudzinski, Piotr; Gabay, Marc; Giamarchi, Thierry

    2010-03-01

    In the weak-coupling limit, we study, as a function of doping, two-leg ladders with a unit cell containing both Cu and O atoms. For purely repulsive interactions, using bosonization and a novel RG scheme, we find that in a broad region of the phase diagram, the ground state consists of a pattern of orbital currents (OCP) defined on the top of an incommensurate density wave. The internal symmetry of the OCP is specific for the ladder structure, different than the ones suggested up to now for 2D cuprates. We focus on this OCP and look for measurable signals of its existence: we compute magnetic fields induced within the ladder and we check what kind of changes in the phase diagram one may expect due to SU(2) spin-rotational symmetry breaking. We also investigate a single impurity problem (incl. OCP): we discuss if Kondo physics is at play, and make qualitative predictions about the nature of impurity backscattering. This enables us to show the influence of SU(2) symmetry breaking on conductivity. We estimate the value of gap opened due to the OCP, give analytic expressions for correlation functions and discuss magnetic properties of a new phase.

  16. Induction of apoptosis in a flounder gill cell line by lymphocystis disease virus infection.

    PubMed

    Hu, G-B; Cong, R-S; Fan, T-J; Mei, X-G

    2004-11-01

    Lymphocystis disease virus (LCDV), a large icosahedral DNA virus classified to the iridovirus family, is the causative agent of lymphocystis, a disease which occurs in marine and freshwater fish species and is characterized by formation of papilloma-like lesions on the surface of the skin. In vitro, LCDV infection causes flounder gill cells, an adherent cell line, to exhibit an obvious cytopathic effect (CPE). In order to test whether apoptosis is responsible for the observed CPE, cells infected with LCDV at a multiplicity of infection (m.o.i.) of 5 PFU per cell were examined at various time intervals for the appearance of apoptotic signs. Nuclear fragmentation, DNA laddering and caspase activation were observed in the infected cells at the time (i.e. 10 days post-infection) when an intensive CPE was observed. These findings demonstrate that LCDV is capable of inducing apoptosis in vitro, which is different from the result of LCDV infection in vivo, and consequently suggest an intricate LCDV-host interaction.

  17. A demonstration that electroweak theory can violate parity automatically (leptonic case)

    NASA Astrophysics Data System (ADS)

    Furey, C.

    2018-02-01

    We bring to light an electroweak model which has been reappearing in the literature under various guises.1-5 In this model, weak isospin is shown to act automatically on states of only a single chirality (left). This is achieved by building the model exclusively from the raising and lowering operators of the Clifford algebra ℂl(4). That is, states constructed from these ladder operators mimic the behaviour of left- and right-handed electrons and neutrinos under unitary ladder operator symmetry. This ladder operator symmetry is found to be generated uniquely by su(2)L and u(1)Y. Crucially, the model demonstrates how parity can be maximally violated, without the usual step of introducing extra gauge and extra Higgs bosons, or ad hoc projectors.

  18. In-line digital holography with phase-shifting Greek-ladder sieves

    NASA Astrophysics Data System (ADS)

    Xie, Jing; Zhang, Junyong; Zhang, Yanli; Zhou, Shenlei; Zhu, Jianqiang

    2018-04-01

    Phase shifting is the key technique in in-line digital holography, but traditional phase shifters have their own limitations in short wavelength regions. Here, phase-shifting Greek-ladder sieves with amplitude-only modulation are introduced into in-line digital holography, which are essentially a kind of diffraction lens with three-dimensional array diffraction-limited foci. In the in-line digital holographic experiment, we design two kinds of sieves by lithography and verify the validity of their phase-shifting function by measuring a 1951 U.S. Air Force resolution test target and three-dimensional array foci. With advantages of high resolving power, low cost, and no limitations at shorter wavelengths, phase-shifting Greek-ladder sieves have great potential in X-ray holography or biochemical microscopy for the next generation of synchrotron light sources.

  19. Umatilla River Fish Passage Operations Project : Annual Progress Report October 2007 - September 2008.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bronson, James P.; Loffink, Ken; Duke, Bill

    Threemile Falls Dam (Threemile Dam), located near the town of Umatilla, is the major collection and counting point for adult salmonids returning to the Umatilla River. Returning salmon and steelhead were enumerated at Threemile Dam from June 7, 2007 to August 11, 2008. A total of 3,133 summer steelhead (Oncorhynchus mykiss); 1,487 adult, 1,067 jack, and 999 subjack fall Chinook (O. tshawytscha); 5,140 adult and 150 jack coho (O. kisutch); and 2,009 adult, 517 jack, and 128 subjack spring Chinook (O. tshawytscha) were counted. All fish were enumerated at the east bank facility. Of the fish counted, 1,442 summer steelheadmore » and 88 adult and 84 jack spring Chinook were hauled upstream from Threemile Dam. There were 1,497 summer steelhead; 609 adult, 1,018 jack and 979 subjack fall Chinook; 5,036 adult and 144 jack coho; and 1,117 adult, 386 jack and 125 subjack spring Chinook either released at, or allowed to volitionally migrate past, Threemile Dam. Also, 110 summer steelhead; 878 adult and 43 jack fall Chinook; and 560 adult and 28 jack spring Chinook were collected as broodstock for the Umatilla River hatchery program. In addition, there were 241 adult and 15 jack spring Chinook collected at Threemile Dam for outplanting in the South Fork Walla Walla River and Mill Cr, a tributary of the mainstem Walla Walla River. The Westland Canal juvenile facility (Westland), located near the town of Echo at river mile (RM) 27, is the major collection point for out-migrating juvenile salmonids and steelhead kelts. The canal was open for 158 days between February 11, 2008 and July 18, 2008. During that period, fish were bypassed back to the river 150 days and were trapped 6 days. There were also 2 days when fish were directed into and held in the canal forebay between the time the bypass was closed and the trap opened. An estimated 64 pounds of fish were transported from the Westland trapping facility. Approximately 25.8% of the fish transported were salmonids. In addition, one adult Pacific lamprey was trapped and released above the Westland ladder this year. The Threemile Dam west bank juvenile bypass was opened on March 11, 2008 in conjunction with water deliveries and continued through the summer. West Extension Irrigation District (WEID) discontinued diverting live flow on June 24, 2008 but the bypass remained open throughout the project year. The juvenile trap was not operated this project year.« less

  20. Influence of Stress State, Stress Orientation, and Rock Properties on the Development of Deformation-Band 'Ladder' Arrays in Porous Sandstone

    NASA Astrophysics Data System (ADS)

    Schultz, R. A.; Soliva, R.; Fossen, H.

    2013-12-01

    Deformation bands in porous rocks tend to develop into spatially organized arrays that display a variety of lengths and thicknesses, and their geometries and arrangements are of interest with respect to fluid flow in reservoirs. Field examples of deformation band arrays in layered clastic sequences suggest that the development of classic deformation band arrays, such as ladders and conjugate sets, and the secondary formation of through-going faults appear to be related to the physical properties of the host rock, the orientation of stratigraphic layers relative to the far-field stress state, and the evolution of the local stress state within the developing array. We have identified several field examples that demonstrate changes in band properties, such as type and orientation, as a function of one or more of these three main factors. Normal-sense deformation-band arrays such as those near the San Rafael Swell (Utah) develop three-dimensional ladder-style arrays at a high angle to the maximum compression direction; these cataclastic shear bands form at acute angles to the maximum compression not very different from that of the optimum frictional sliding plane, thus facilitating the eventual nucleation of a through-going fault. At Orange quarry (France), geometrically conjugate sets of reverse-sense compactional shear bands form with angles to the maximum compression direction that inhibit fault nucleation within them; the bands in this case also form at steep enough angles to bedding that stratigraphic heterogeneities within the deforming formation were apparently not important. Two exposures of thrust-sense ladders at Buckskin Gulch (Utah) demonstrate the importance of host-rock properties, bedding-plane involvement, and local stress perturbations on band-array growth. In one ladder, thrust-sense shear deformation bands nucleated along suitably oriented bedding planes, creating overprinting sets of compaction bands that can be attributed to layer properties and local stress changes near the shear-band tips. Two other ladder exposures preserve compaction bands having nearly perpendicular orientations relative the bounding shear bands that define contractional stepovers that also nucleated on bedding planes. These cases suggest that local stress changes within a deformation-band stepover may lead to either rotation of bands or changes in band type relative to bands formed outside the stepover. The development of the common geometries of deformation band arrays, such as ladders, and the deformation paths to faulting thus depend on a combination of stress state, stress orientation, and rock properties.

  1. B-1 Systems Approach to Training. Task Analysis Listings

    DTIC Science & Technology

    1975-07-01

    OFF FUEL VALVES AND PUMPS PHR-OFF FUEL VALVES AND PUMPS = AUTO ^FT TFR MODE LAND SELECTOR SWITCHES TQ *QFF...TFR MODE SWITCH-RIGHT «JFT L TFR MODE SELECT SWITCH TQ * TF1 CHECKLIST TFR MODE SWITCH-LEFT TFR MODE SWITCH-LEFT...DOOR HANDLE ENTRY LADDER CONTROL SWITCH ENTRY LADDER CONTROL SWITCH = DN* 16.1.1.001.OC* SET TANK FILL VALVE SWS ON

  2. The Earnings Ladder. Who's at the Bottom? Who's at the Top? Statistical Brief.

    ERIC Educational Resources Information Center

    Bureau of the Census (DOC), Washington, DC. Economics and Statistics Administration.

    Data collected by the March Current Population Survey were used to identify which groups of year-round, full-time civilian workers aged 16 and older were most likely to be at the top and bottom of the earnings ladder. Women, young workers, less-educated individuals, and Hispanics were most likely to earn less than $13,091 (1992 constant dollars),…

  3. HRD--Leadership Training for Women on the Lower Rungs of the Organizational Ladder: A Qualitative Study

    ERIC Educational Resources Information Center

    Dugan, Dixie

    2010-01-01

    The purpose of this case study, HRD--Leadership Training for Women on the Lower Rungs of the Organizational Ladder: A Qualitative Study, was to determine the responses of a group of women to a series of classes on leadership development and to perceive what they might have gained from this experience. These classes were modeled after those offered…

  4. Astronaut Alan Bean steps from ladder of Lunar Module for EVA

    NASA Image and Video Library

    1969-11-19

    AS12-46-6729 (19 Nov. 1969) --- Astronaut Alan L. Bean, lunar module pilot for the Apollo 12 lunar landing mission, steps from the ladder of the Lunar Module to join astronaut Charles Conrad Jr., commander, in extravehicular activity on Nov. 19, 1969. Astronaut Richard F. Gordon Jr., command module pilot, remained with the Command and Service Modules in lunar orbit.

  5. Program Evaluation and Organizational Change: A Profile of Strengths and Insufficiencies in Readiness Impacting Policy Recommendations, Change and Restructuring of a Comprehensive Statewide Educational Reform Movement.

    ERIC Educational Resources Information Center

    Packard, Richard D.; Dereshiwsky, Mary I.

    Presented is the fourth Summative Report developed by Northern Arizona University researchers for the Joint Legislative Committee on Career Ladders (JLCCL) concerning the implementation of the Arizona Career Ladder Program (ACLP). The ACLP has resulted in considerable developmental success toward meeting intended program goals. This report is…

  6. Career Ladders and Teacher Incentives: The Utah Experiment. Part I: The Implementation. Final Report: Secretary's Discretionary Program Implementation Grant to Develop Teacher Incentive Structures.

    ERIC Educational Resources Information Center

    Peterson, Ken; Kauchak, Don

    This volume, the first of two reports on development of teacher incentive structures, focuses on implementation of a career ladder design and teacher evaluation experiment in four Utah school districts. The report has five sections. Section 1 describes study background and implementation of an evaluation-reward system that featured data collection…

  7. Clinical ladder program implementation: a project guide.

    PubMed

    Ko, Yu Kyung; Yu, Soyoung

    2014-11-01

    This article describes the development of a clinical ladder program (CLP) implementation linked to a promotion system for nurses. The CLP task force developed criteria for each level of performance and a performance evaluation tool reflecting the self-motivation of the applicant for professional development. One year after implementation, the number of nurses taking graduate courses increased, and 7 nurses were promoted to nurse manager positions.

  8. Corrosion Control Specialist Career Ladder AFSC 53530, 53550, 53570, and 53690

    DTIC Science & Technology

    1975-03-01

    AD-AO08 189 CORROSION CONTROL SPECIALIST CAREER LADDER AFSC 53530, 53550, 53570, AND 53690 Air Force Occupational Measurement Center Lackland Air... Force Base, Texas 1 March 1975 I DISTRIBUTED BY: National Technical Information Service U. S. DEPARTMENT OF COMMERCE *I 11 5091 OCCUPATIONAL SURVEY...DISCUSSION OF BACKGROUJND INFORMATION --------------------------- xxvi 01L< R PREFACE This report presents the results cf detailed Air Force

  9. The Effect of George Bush's NAFTA on American Workers: Ladder Up or Ladder Down? Briefing Paper.

    ERIC Educational Resources Information Center

    Faux, Jeff; Lee, Thea

    The proposed North American Free Trade Agreement (NAFTA) will result in lower wages, fewer jobs, and generally reduced living standards for the majority of U.S. workers. Substantial costs to the U.S. economy will occur in job and income loss and few off-setting benefits for most workers. Proponents argue that NAFTA will create upward mobility for…

  10. Two-point resistance of the Möbius ladder

    NASA Astrophysics Data System (ADS)

    Chair, Noureddine; Dannoun, Elham Mohammed Ali

    2015-03-01

    Exact formulas for the two-point resistance and the Kirchhoff index of the Möbius ladder are given based on the recently developed analytical approach by Chair (2012 Ann. Phys. 327 2899). The expression for the two-point resistance is written in terms of the two-point resistance of N/2-cycle graph and the Bejaia and the Pisa numbers recently introduced by the first author.

  11. Development of Curriculum Content for a Unique Career Ladder Multi-Entry/Multi-Exit Nursing Program. Final Report.

    ERIC Educational Resources Information Center

    Rosbach, Ellen M.

    A project was undertaken to develop the curriculum content for a unique career ladder multi-entry/multi-exit nursing program that would provide training for nurse aides, practical nurses, and registered nurses. The major objectives of the project were to conduct a review of the literature on curriculum materials presently in use, to develop 11…

  12. Subjective Social Status and Psychological Distress in Mothers of Young Children.

    PubMed

    Michelson, Nicole; Riis, Jenna L; Johnson, Sara B

    2016-10-01

    Introduction Perceptions of social standing have increasingly well-documented relationships with health. Higher subjective social status (SSS) is associated with better psychological well-being among women, and mothers of newborns. The relationship between SSS and psychological distress among mothers of young children, however, is largely unknown. SSS may provide insight into aspects of maternal functioning that are relevant to parenting capacity, as well as insight into future health; in addition, SSS is brief, and may be perceived as less intrusive than other measures of socioeconomic status or mental health. We evaluated the relationship between SSS and psychological distress among mothers of 5-year-old children from diverse socioeconomic backgrounds. Methods One hundred and sixty-two mothers of 5-year old children, who participated in a study of child self-regulation, completed surveys that assessed sociodemographics, mental health, and perceived social support. The MacArthur Scale of SSS used pictures of ten-rung ladders to assess respondents' social position in relation to the US (SES ladder) and their community (community ladder). Quantile regression models were used to assess the relationship between maternal psychological distress (perceived social support, depressive symptoms, anxiety) and the ladders (individually and together), adjusting for maternal age, race, education, and number of children. To examine whether the SSS-health relationships differed by race, the models were also stratified by race. Results Community ladder ranking was positively associated with social support (β = 1.34, SE = 0.33, p < .001), and negatively associated with depressive symptoms (β = -1.34, SE = 0.52, p < .05). SES ladder ranking was positively associated with social support (β = 1.17, SE = 0.52, p < .05). Findings in the full sample were driven by more robust relationships between psychological distress and community SSS among Black/African-American mothers. Discussion The findings suggest that perceived social standing in one's community is associated with maternal psychological well-being. Community SSS may be particularly influential for Black/African-American mothers' well-being.

  13. Using a familiar risk comparison within a risk ladder to improve risk understanding by low numerates: a study of visual attention.

    PubMed

    Keller, Carmen

    2011-07-01

    Previous experimental research provides evidence that a familiar risk comparison within a risk ladder is understood by low- and high-numerate individuals. It especially helps low numerates to better evaluate risk. In the present study, an eye tracker was used to capture individuals' visual attention to a familiar risk comparison, such as the risk associated with smoking. Two parameters of information processing-efficiency and level-were derived from visual attention. A random sample of participants from the general population (N= 68) interpreted a given risk level with the help of the risk ladder. Numeracy was negatively correlated with overall visual attention on the risk ladder (r(s) =-0.28, p= 0.01), indicating that the lower the numeracy, the more the time spent looking at the whole risk ladder. Numeracy was positively correlated with the efficiency of processing relevant frequency (r(s) = 0.34, p < 0.001) and relevant textual information (r(s) = 0.34, p < 0.001), but not with the efficiency of processing relevant comparative information and numerical information. There was a significant negative correlation between numeracy and the level of processing of relevant comparative risk information (r(s) =-0.21, p < 0.01), indicating that low numerates processed the comparative risk information more deeply than the high numerates. There was no correlation between numeracy and perceived risk. These results add to previous experimental research, indicating that the smoking risk comparison was crucial for low numerates to evaluate and understand risk. Furthermore, the eye-tracker method is promising for studying information processing and improving risk communication formats. © 2011 Society for Risk Analysis.

  14. Symmetry-broken states in a system of interacting bosons on a two-leg ladder with a uniform Abelian gauge field

    NASA Astrophysics Data System (ADS)

    Greschner, S.; Piraud, M.; Heidrich-Meisner, F.; McCulloch, I. P.; Schollwöck, U.; Vekua, T.

    2016-12-01

    We study the quantum phases of bosons with repulsive contact interactions on a two-leg ladder in the presence of a uniform Abelian gauge field. The model realizes many interesting states, including Meissner phases, vortex fluids, vortex lattices, charge density waves, and the biased-ladder phase. Our work focuses on the subset of these states that breaks a discrete symmetry. We use density matrix renormalization group simulations to demonstrate the existence of three vortex-lattice states at different vortex densities and we characterize the phase transitions from these phases into neighboring states. Furthermore, we provide an intuitive explanation of the chiral-current reversal effect that is tied to some of these vortex lattices. We also study a charge-density-wave state that exists at 1/4 particle filling at large interaction strengths and flux values close to half a flux quantum. By changing the system parameters, this state can transition into a completely gapped vortex-lattice Mott-insulating state. We elucidate the stability of these phases against nearest-neighbor interactions on the rungs of the ladder relevant for experimental realizations with a synthetic lattice dimension. A charge-density-wave state at 1/3 particle filling can be stabilized for flux values close to half a flux quantum and for very strong on-site interactions in the presence of strong repulsion on the rungs. Finally, we analytically describe the emergence of these phases in the low-density regime, and, in particular, we obtain the boundaries of the biased-ladder phase, i.e., the phase that features a density imbalance between the legs. We make contact with recent quantum-gas experiments that realized related models and discuss signatures of these quantum states in experimentally accessible observables.

  15. Implementation of Evidence-Based Practice in Relation to a Clinical Nursing Ladder System: A National Survey in Taiwan

    PubMed Central

    Weng, Yi-Hao; Chen, Chiehfeng; Kuo, Ken N; Yang, Chun-Yuh; Lo, Heng-Lien; Chen, Kee-Hsin; Chiu, Ya-Wen

    2015-01-01

    Background Although evidence-based practice (EBP) has been widely investigated, few studies have investigated its correlation with a clinical nursing ladder system. The current national study evaluates whether EBP implementation has been incorporated into the clinical ladder system. Methods A cross-sectional questionnaire survey was conducted nationwide of registered nurses among regional hospitals of Taiwan in January to April 2011. Subjects were categorized into beginning nurses (N1 and N2) and advanced nurses (N3 and N4) by the clinical ladder system. Multivariate logistic regression model was used to adjust for possible confounding demographic factors. Results Valid postal questionnaires were collected from 4,206 nurses, including 2,028 N1, 1,595 N2, 412 N3, and 171 N4 nurses. Advanced nurses were more aware of EBP than beginning nurses (p < 0.001; 90.7% vs. 78.0%). In addition, advanced nurses were more likely to hold positive beliefs about and attitudes toward EBP (p < 0.001) and possessed more sufficient knowledge of and skills in EBP (p < 0.001). Furthermore, they more often implemented EBP principles (p < 0.001) and accessed online evidence-based retrieval databases (p < 0.001). The most common motivation for using online databases was self-learning for advanced nurses and positional promotion for beginning nurses. Multivariate logistic regression analyses showed advanced nurses were more aware of EBP, had higher knowledge and skills of EBP, and more often implemented EBP than beginning nurses. Linking Evidence to Action The awareness of, beliefs in, attitudes toward, knowledge of, skills in, and behaviors of EBP among advanced nurses were better than those among beginning nurses. The data indicate that a clinical ladder system can serve as a useful means to enhance EBP implementation. PMID:25588625

  16. Clarifying the Hubble constant tension with a Bayesian hierarchical model of the local distance ladder

    NASA Astrophysics Data System (ADS)

    Feeney, Stephen M.; Mortlock, Daniel J.; Dalmasso, Niccolò

    2018-05-01

    Estimates of the Hubble constant, H0, from the local distance ladder and from the cosmic microwave background (CMB) are discrepant at the ˜3σ level, indicating a potential issue with the standard Λ cold dark matter (ΛCDM) cosmology. A probabilistic (i.e. Bayesian) interpretation of this tension requires a model comparison calculation, which in turn depends strongly on the tails of the H0 likelihoods. Evaluating the tails of the local H0 likelihood requires the use of non-Gaussian distributions to faithfully represent anchor likelihoods and outliers, and simultaneous fitting of the complete distance-ladder data set to ensure correct uncertainty propagation. We have hence developed a Bayesian hierarchical model of the full distance ladder that does not rely on Gaussian distributions and allows outliers to be modelled without arbitrary data cuts. Marginalizing over the full ˜3000-parameter joint posterior distribution, we find H0 = (72.72 ± 1.67) km s-1 Mpc-1 when applied to the outlier-cleaned Riess et al. data, and (73.15 ± 1.78) km s-1 Mpc-1 with supernova outliers reintroduced (the pre-cut Cepheid data set is not available). Using our precise evaluation of the tails of the H0 likelihood, we apply Bayesian model comparison to assess the evidence for deviation from ΛCDM given the distance-ladder and CMB data. The odds against ΛCDM are at worst ˜10:1 when considering the Planck 2015 XIII data, regardless of outlier treatment, considerably less dramatic than naïvely implied by the 2.8σ discrepancy. These odds become ˜60:1 when an approximation to the more-discrepant Planck Intermediate XLVI likelihood is included.

  17. Electronic structure reconstruction across the antiferromagnetic transition in TaFe₁̣₂₃Te₃ spin ladder

    DOE PAGES

    Xu, Min; Wang, Li -Min; Peng, Rui; ...

    2015-02-01

    With angle-resolved photoemission spectroscopy, we studied the electronic structure of TaFe₁̣₂₃Te₃, a two-leg spin ladder compound with a novel antiferromagnetic ground state. Quasi-two-dimensional Fermi surface is observed, with sizable inter-ladder hopping. Moreover, instead of observing an energy gap at the Fermi surface in the antiferromagnetic state, we observed the shifts of various bands. Combining these observations with density-functional-theory calculations, we propose that the large scale reconstruction of the electronic structure, caused by the interactions between coexisting itinerant electrons and local moments, is most likely the driving force of the magnetic transition. Thus TaFe₁̣₂₃Te₃ serves as a simpler platform that containsmore » similar ingredients as the parent compounds of iron-based superconductors.« less

  18. Automatic Digital Switching Specialist Career Ladder: United States Air Force Job Inventory. AFSCs 29530, 29570, and 29590.

    ERIC Educational Resources Information Center

    Air Force Personnel and Training Research Center, Lackland AFB, TX.

    The U. S. Air Force job inventory for the automatic digital switching specialist career ladder is divided into 12 categories, each of which is broken down into a duty-task list. Space is provided for Air Force personnel filling out the inventory to check whether each task is at present part of their duties. The 12 categories are: organizing and…

  19. [Application of general retention time formula for gradient liquid chromatography in the studies of ladder-like gradient elution].

    PubMed

    Sun, Xiaoli; Hao, Weiqiang; Wang, Junde; Di, Bin; Chen, Qiang; Zhuang, Wei; Yu, Qiang; Zhang, Peipei

    2013-08-01

    By not explicitly specifying the type of solvent strength model, the features of ladder-like gradient elution were studied based on the general retention time formula that was derived in our previous work. For the case where the solute is eluted at like gradient, we derived the expression that connects the mobile phase composition (phiR), at which the solute is eluted from the column, with the gradient slope (B). It was shown that phiR will increase with the increase of B in this case. For the case where the solute is eluted at the last isocratic segment of the ladder-like gradient, it was proven that the retention time (tR) will correlate linearly with the reciprocal of the gradient slope (1/B) when the initial and final mobile phase compositions are set to be constant. In experiments, by taking biphenyl as the sample, the values of retention time in isocratic and gradient elution were measured on a C18 column by using a mixture of methanol and water as the mobile phase. The experimental values were found to be well consistent with the theoretical values that were calculated from the expressions. These expressions will be helpful to understand the features of the ladder-like gradient in practice.

  20. The Ladder of Life Detection.

    PubMed

    Neveu, Marc; Hays, Lindsay E; Voytek, Mary A; New, Michael H; Schulte, Mitchell D

    2018-06-04

    We describe the history and features of the Ladder of Life Detection, a tool intended to guide the design of investigations to detect microbial life within the practical constraints of robotic space missions. To build the Ladder, we have drawn from lessons learned from previous attempts at detecting life and derived criteria for a measurement (or suite of measurements) to constitute convincing evidence for indigenous life. We summarize features of life as we know it, how specific they are to life, and how they can be measured, and sort these features in a general sense based on their likelihood of indicating life. Because indigenous life is the hypothesis of last resort in interpreting life-detection measurements, we propose a small but expandable set of decision rules determining whether the abiotic hypothesis is disproved. In light of these rules, we evaluate past and upcoming attempts at life detection. The Ladder of Life Detection is not intended to endorse specific biosignatures or instruments for life-detection measurements, and is by no means a definitive, final product. It is intended as a starting point to stimulate discussion, debate, and further research on the characteristics of life, what constitutes a biosignature, and the means to measure them. Key Words: Life detection-Life-detection instruments-Biosignatures-Biomarkers. Astrobiology 18, xxx-xxx.

  1. Castine Report S-15 Project: Shipbuilding Standards

    DTIC Science & Technology

    1976-01-01

    Fixed Square Windows Ships” Extruded Aluminium Alloy Square Windows “ Ships” Foot Steps Ships* Wooden Hand Rail . Pilot Ladders Panama Canal Pilot...Platforms Aluminium Alloy Accommodation Ladders Mouth Pieces for Voice Tube Chain Drwe Type Telegraphs Fittings for Steam Whistle Llfeboats Radial Type...Cast Steel Angle Valves for Compressed Air F 8001-1957 F 8002-1967 F 8003.1975 F 8004.1975 F 8011 1966 F 8013.1969 F 8101.1969 F 8401.1970 F

  2. The hadronic interaction model EPOS

    NASA Astrophysics Data System (ADS)

    Werner, Klaus

    2008-01-01

    EPOS is a sophisticated multiple scattering approach based on partons and Pomerons (parton ladders), with special emphasis on high parton densities. The latter aspect, particularly important in proton-nucleus or nucleus-nucleus collisions, is taken care of via an effective treatment of Pomeron-Pomeron interactions, referred to as parton ladder splitting. In addition, collective effects are introduced after separating the high density central core from the peripheral corona. EPOS is the successor of the NEXUS model.

  3. Multiscale Computational Design Optimization of Copper-Strengthened Steel for High Cycle Fatigue

    DTIC Science & Technology

    2010-03-19

    strain energy) and (3) modeling of a slip band (of PSB ladder underlying structure) and attendant crack initiation process. 15. SUBJECT TERMS 16...energy). (C) A modeling of a slip band (of PSB ladder underlying structure) and attendant crack initiation process. Major results obtained are...differentiate the morphology from others, e.g., vein and planar structures of dislocations. Results and Discussion for (C) (C-1) Modeling PSB For modeling

  4. AGARD Flight Test Techniques Series. Volume 8. Flight Testing under Extreme Environmental Conditions

    DTIC Science & Technology

    1988-01-01

    gravity control system operation. The overall objective of fuel system tests is to determine whether the system functions properly at all conditions both... gravity . 3.3.4 Hydraulic System The functional adequacy of the hydraulic system should be evaluated by monitoring operating system temperatures and...mechanical or gravity function of the crew ladder should be evaluated. The ladder should be exposed to freasing rain and icing to evaluate the non

  5. At Sea Personnel Transfer Concepts

    DTIC Science & Technology

    2006-07-28

    transfer at sea. Personnel can be transferred with relatively short notice using a 4” double braided , polyester synthetic highline instead of steel...supporting 1000 lbs at the tip of the ladder, and sustaining a 60000 gal/hr hose firing at any angle. The ladders are capable of supporting this...significant burden for the bridges. To further reduce the tip weight, the vacuum pumps will be stored on the deck of the ship and hosing will be run

  6. Hydrothermal synthesis and characterization of a novel supramolecular network compound of Co(NIA) 2(H 2O) 4 with molecular ladder hydrogen bond chains (NIA=nicotinate)

    NASA Astrophysics Data System (ADS)

    Jia, Hong-Bin; Yu, Jie-Hui; Xu, Ji-Qing; Ye, Ling; Ding, Hong; Jing, Wei-Jie; Wang, Tie-Gang; Xu, Jia-Ning; Li, Zeng-Chun

    2002-10-01

    By hydrothermal method, a novel supramolecular compound, Co(NIA) 2(H 2O) 4 was synthesized and its structure was characterized with elemental analysis, FT-IR spectrum, TGA and X-ray diffractometer, indicating that it is a novel polyporous supramolecule with molecular ladder hydrogen-bonded chains. TGA curve shows its thermal stability up to 520 °C.

  7. Pavements Maintenance and Construction Equipment Operator Career Ladders: United States Air Force Job Inventory. AFSCs 55130/31, 55150/51, 55170/71, and 55191.

    ERIC Educational Resources Information Center

    Air Force Personnel and Training Research Center, Lackland AFB, TX.

    The U. S. Air Force job inventory for the pavements maintenance and construction equipment operator career ladders is divided into 26 categories, each of which is broken down into a duty-task list. Space is provided for Air Force personnel filling out the inventory to check whether each task is at present part of their duties. The 26 categories…

  8. (p,q) deformations and (p,q)-vector coherent states of the Jaynes-Cummings model in the rotating wave approximation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ben Geloun, Joseph; Govaerts, Jan; Hounkonnou, M. Norbert

    2007-03-15

    Classes of (p,q) deformations of the Jaynes-Cummings model in the rotating wave approximation are considered. Diagonalization of the Hamiltonian is performed exactly, leading to useful spectral decompositions of a series of relevant operators. The latter include ladder operators acting between adjacent energy eigenstates within two separate infinite discrete towers, except for a singleton state. These ladder operators allow for the construction of (p,q)-deformed vector coherent states. Using (p,q) arithmetics, explicit and exact solutions to the associated moment problem are displayed, providing new classes of coherent states for such models. Finally, in the limit of decoupled spin sectors, our analysis translatesmore » into (p,q) deformations of the supersymmetric harmonic oscillator, such that the two supersymmetric sectors get intertwined through the action of the ladder operators as well as in the associated coherent states.« less

  9. Low-Field Bi-Skyrmion Formation in a Noncentrosymmetric Chimney Ladder Ferromagnet

    NASA Astrophysics Data System (ADS)

    Takagi, R.; Yu, X. Z.; White, J. S.; Shibata, K.; Kaneko, Y.; Tatara, G.; Rønnow, H. M.; Tokura, Y.; Seki, S.

    2018-01-01

    The real-space spin texture and the relevant magnetic parameters were investigated for an easy-axis noncentrosymmetric ferromagnet Cr11 Ge19 with Nowotny chimney ladder structure. Using Lorentz transmission electron microscopy, we report the formation of bi-Skyrmions, i.e., pairs of spin vortices with opposite magnetic helicities. The quantitative evaluation of the magnetocrystalline anisotropy and Dzyaloshinskii-Moriya interaction (DMI) proves that the magnetic dipolar interaction plays a more important role than the DMI on the observed bi-Skyrmion formation. Notably, the critical magnetic field value required for the formation of bi-Skyrmions turned out to be extremely small in this system, which is ascribed to strong easy-axis anisotropy associated with the characteristic helix crystal structure. The family of Nowotny chimney ladder compounds may offer a unique material platform where two distinctive Skyrmion formation mechanisms favoring different topological spin textures can become simultaneously active.

  10. General view of the middeck looking aft and port. In ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    General view of the mid-deck looking aft and port. In this view you can clearly see the crew access hatch and the airlock hatch. The hose and ladder in the image are pieces of ground support equipment. The hose is part of the climate control apparatus used while orbiters are being processed. The ladder is used to access the inter-deck passage, leading to the flight deck, while the orbiter is in 1g (earth's gravity). A careful observer will notice a void in the wall near the base of the access ladder, this is the Waste Management Compartment with the Waste Management System, i.e. Space Potty, removed. This view was taken in the Orbiter Processing Facility at the Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

  11. Implementability of two-qubit unitary operations over the butterfly network and the ladder network with free classical communication

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Akibue, Seiseki; Murao, Mio

    2014-12-04

    We investigate distributed implementation of two-qubit unitary operations over two primitive networks, the butterfly network and the ladder network, as a first step to apply network coding for quantum computation. By classifying two-qubit unitary operations in terms of the Kraus-Cirac number, the number of non-zero parameters describing the global part of two-qubit unitary operations, we analyze which class of two-qubit unitary operations is implementable over these networks with free classical communication. For the butterfly network, we show that two classes of two-qubit unitary operations, which contain all Clifford, controlled-unitary and matchgate operations, are implementable over the network. For the laddermore » network, we show that two-qubit unitary operations are implementable over the network if and only if their Kraus-Cirac number do not exceed the number of the bridges of the ladder.« less

  12. Stimulated emission from ladder-type two-photon coherent atomic ensemble.

    PubMed

    Park, Jiho; Moon, Han Seb

    2018-05-28

    We investigated the stimulated emission from a ladder-type two-photon coherent atomic ensemble, for the 5S 1/2 - 5P 3/2 - 5D 5/2 transition of 87 Rb atoms. Under the ladder-type two-photon resonance condition obtained using pump and coupling lasers, we observed broad four-wave mixing (FWM) light stimulated from two-photon coherence induced by the seed laser coupled between the ground state of 5S 1/2 and the first excited state of 5P 3/2 . A dip in the FWM spectrum was obtained for three-photon resonance due to V-type two-photon coherence using the pump and seed lasers. From the FWM spectra obtained for varying frequency detuning and seed-laser power, we determined that the seed laser acts as a stimulator for FWM generation, but also acts as a disturber of FWM due to V-type two-photon coherence.

  13. High-pressure electrical resistivity studies for Ba1-xCsxFe2Se3

    NASA Astrophysics Data System (ADS)

    Kawashima, C.; Soeda, H.; Takahashi, H.; Hawai, T.; Nambu, Y.; Sato, T. J.; Hirata, Y.; Ohgushi, K.

    2017-10-01

    High-pressure electrical resistance measurements were performed for iron-based ladder material Ba1-xCsxFe2Se3 (x = 0.25 and 0.65) using a diamond anvil cell (DAC). Recent high-pressure study revealed that iron-based ladder material BaFe2S3 exhibits an insulator-metal transition and superconductivity, and this discovery would provide important insight for understanding the mechanism of iron-based superconductors. Therefore, it is intriguing to investigate the high-pressure properties for the iron-based ladder material Ba1-xCsxFe2Se3 system. The parent compounds BaFe2Se3 and CsFe2Se3 show insulating and magnetic ordering features. For Ba1-xCsxFe2Se3 system, no magnetic ordering is observed for x = 0.25 and minimum charge gap was estimated for x = 0.65. The insulator-metal transitions are observed in both materials.

  14. High-pressure electrical resistivity studies for Ba1-xCsxFe2Se3

    NASA Astrophysics Data System (ADS)

    Kawashima, C.; Soeda, H.; Takahashi, H.; Hawai, T.; Nambu, Y.; Sato, T. J.; Hirata, Y.; Ohgushi, K.

    2017-10-01

    High-pressure electrical resistance measurements were performed for iron-based ladder material Ba1-xCsxFe2Se3 (x = 0.25 and 0.65) using a diamond anvil cell (DAC). Recent high-pressure study revealed that iron-based ladder material BaFe2S3 exhibits an insulator- metal transition and superconductivity, and this discovery would provide important insight for understanding the mechanism of iron-based superconductors. Therefore, it is intriguing to investigate the high-pressure properties for the iron-based ladder material Ba1-xCsxFe2Se3 system. The parent compounds BaFe2Se3 and CsFe2Se3 show insulating and magnetic ordering features. For Ba1-xCsxFe2Se3 system, no magnetic ordering is observed for x = 0.25 and minimum charge gap was estimated for x = 0.65. The insulator-metal transitions are observed in both materials.

  15. Extraordinary Spin-Wave Thermal Conductivity in Low-Dimensional Copper Oxides

    DTIC Science & Technology

    2015-01-23

    excitations of spin degrees of freedom. We measmed for the first time the magnon -phonon coupling parameter of a spin-ladder compound over a wide temperatme...the first time the magnon -phonon coupling parameter of a spin-ladder compound over a wide temperature range. We developed advances in the analysis of...Scientific Instruments, (10 2014): 104903. doi: 10.1063/1.4897622 Gregory T. Hohensee, R. B. Wilson, Joseph P. Feser, David G. Cahill. Magnon -phonon

  16. First Responder Problem Solving and Decision Making in Today’s Asymmetrical Environment

    DTIC Science & Technology

    2008-03-01

    Scenario: Earthquake 4 It is January 2, 2008, and you are working a day-tour in Ladder Company 999 located in Queens, New York. • Ladder 999’s...able to perform both. 121 Scenario: Earthquake 4 You find out that at approximately 8:58 am, the New York City area...RESPONDER PROBLEM SOLVING AND DECISION MAKING IN TODAY’S ASYMMETRICAL ENVIRONMENT Neil R. Hintze Battalion Chief, New York City Fire Department B.A

  17. Magneto-optical polarization rotation in a ladder-type atomic system for tunable offset locking

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Parniak, Michał, E-mail: michal.parniak@fuw.edu.pl; Leszczyński, Adam; Wasilewski, Wojciech

    2016-04-18

    We demonstrate an easily tunable locking scheme for stabilizing frequency-sum of two lasers on a two-photon ladder transition based on polarization rotation in warm rubidium vapors induced by magnetic field and circularly polarized drive field. Unprecedented tunability of the two-photon offset frequency is due to strong splitting and shifting of magnetic states in external field. In our experimental setup, we achieve two-photon detuning of up to 700 MHz.

  18. Context View from 11' on ladder from southeast corner of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Context View from 11' on ladder from southeast corner of Bottle Village parcel, just inside fence. Doll Head Shrine at far left frame, Living Trailer (c.1960 "Spartanette") in center frame. Little Wishing Well at far right frame. Some shrines and small buildings were destroyed in the January 1994 Northridge earthquake, and only their perimeter walls and foundations exist. Camera facing north northwest. - Grandma Prisbrey's Bottle Village, 4595 Cochran Street, Simi Valley, Ventura County, CA

  19. Phonon and magnon dispersions of incommensurate spin ladder compound Sr14Cu24O41

    NASA Astrophysics Data System (ADS)

    Chen, Xi; Bansal, Dipanshu; Sullivan, Sean; Zhou, Jianshi; Delaire, Olivier; Shi, Li

    There are a variety of compounds consisting of two or more interpenetrating sublattices with lattice periods incommensurate at least along one crystal axis. One example is spin ladder compound Sr14Cu24O41 consisting of incommensurate spin ladder and spin chain sublattices. It has been predicted that unique phonon modes occur in these compounds due to the relative motion of the sublattices. In the low-wavelength limit, there is only one longitudinal acoustic mode due to the rigid translation of both sublattices. In addition, one extra pseudo-acoustic mode is present due to relative sliding motions of the two sublattices. Although the theoretical aspects of the lattice dynamics of incommensurate compounds have been studied, there have been few experimental investigations on their phonon dynamics. In this work, single crystals of Sr14Cu24O41are grown by the traveling solvent floating zone method. The phonon dispersion of Sr14Cu24O41 is studied through inelastic neutron scattering measurements in order to better understand its phonon dynamics. In addition, its magnon dispersion is investigated and correlated to the large directional magnon thermal conductivity. The measurements reveal a wealth of intriguing features on phonons and magnons in the spin ladder compound. This work is supported by ARO MURI program under Award # W911NF-14-1-0016.

  20. Apoptosis after gamma irradiation. Is it an important cell death modality?

    PubMed Central

    Siles, E.; Villalobos, M.; Jones, L.; Guerrero, R.; Eady, J. J.; Valenzuela, M. T.; Núñez, M. I.; McMillan, T. J.; Ruiz de Almodóvar, J. M.

    1998-01-01

    Apoptosis and necrosis are two different forms of cell death that can be induced by cytotoxic stress, such as ionizing radiation. We have studied the importance of apoptotic death induced after treatment with 6 Gy of gamma-irradiation in a panel of eight human tumour cell lines of different radiosensitivities. Three different techniques based on the detection of DNA fragmentation have been used, a qualitative one--DNA ladder formation --and two quantitative approaches--in situ tailing and comet assay. No statistically significant relationship between the two quantitative assays was found (r= 0.327, P = 0.159) so these methods seem to show different aspects of the process of cell death. The presence of the DNA ladder related well to the end-labelling method in that the least amount of end labelling was seen in samples in which necrotic degradation rather than apoptotic ladders were seen. However, as the results obtained by the comet assay are not in agreement with the DNA ladder experiments, we suggest that the distinction between the degraded DNA produced by apoptosis and necrosis may be difficult by this technique. Finally, although apoptosis has been proposed to be dependent on p53 functionality, and this may explain differences in cellular radiosensitivity, no statistically significant relationship was found between these parameters and apoptosis in the eight cell lines studied. PMID:9862569

  1. Orbital currents in a generalized Hubbard ladder

    NASA Astrophysics Data System (ADS)

    Fjaerestad, John O.

    2004-03-01

    We study a phase with orbital currents (d-density wave (DDW)/staggered flux phase) in a generalized Hubbard model on the two-leg ladder at zero temperature. Bosonization and perturbative renormalization-group calculations are used to identify a parameter region with long-range DDW order in the weakly interacting half-filled ladder. Finite-size density-matrix renormalization-group (DMRG) studies of ladders with up to 200 rungs, for rational hole dopings δ and intermediate-strength interactions, find that currents remain large in the doped DDW phase, with no evidence of decay.^1,2,3 Motivated by these results, we consider an effective bosonization description of the doped DDW phase in which quantum fluctuations in the total charge mode are neglected.^3 This leads to an analytically solvable Frenkel-Kontorova-like model which predicts that the staggered rung current and the rung electron density show periodic spatial oscillations with wavelengths 2/δ and 1/δ, respectively, with the density minima located at the zeros (domain walls) of the staggered rung current, in good agreement with the DMRG results. We comment on the question of the nature of the asymptotic current correlations in the doped DDW phase. ^1U. Schollwöck, S. Chakravarty, J. O. Fjaerestad, J. B. Marston, and M. Troyer, Phys. Rev. Lett. 90, 186401 (2003). ^2M. Troyer, invited talk at this meeting. ^3J. O. Fjaerestad, J. B. Marston, and U. Schollwöck, unpublished.

  2. Apollo 12 Mission image - Dark view of Astronaut Alan L. Bean climbing down the ladder of the Lunar Module (LM)

    NASA Image and Video Library

    1969-11-19

    AS12-46-6728 (19 Nov. 1969) --- Astronaut Alan L. Bean, lunar module pilot for the Apollo 12 mission, is about to step off the ladder of the Lunar Module to join astronaut Charles Conrad Jr., mission commander, in extravehicular activity (EVA). Conrad and Bean descended in the Apollo 12 LM to explore the moon while astronaut Richard F. Gordon Jr., command module pilot, remained with the Command and Service Modules in lunar orbit.

  3. Final Accumulative Results & Transfer of Knowledge of the Arizona Career Ladder Research & Evaluation Project: Impact on Student Achievement, Formulated Models, Network Anecdotes, & Recommendations to the Legislature for Policy Development, Program Continuation & State-Wide Expansion. Summative Report VIII.

    ERIC Educational Resources Information Center

    Packard, Richard D.; Dereshiwsky, Mary I.

    This paper presents research findings concerning the Career Ladder pilot test program in Arizona. The program is designed to reward and motivate teachers based on performance. One of the program's key features is the flexibility and innovation allowed to participating districts in their individual development of program designs and structures. An…

  4. Refrigeration and Cryogenics Career Ladder, AFSc 54530, 54550, and 54570.

    DTIC Science & Technology

    1983-07-01

    STATES AIR FORCE D cl e 00l REFRIGERATION AND CRYOGENICS CAREER LADDER AFSCs 54530, 54550, AND 54570 AFPT 90-545-461 JULY 1983 ,-. 71983 - OCCUPATIONAL...been reviewed and is approved. PAUL T. RINGENBACH, Colonel, USAF WALTER E . DRISKILL, Ph.D. Commander Chief, Occupational Analysis Branch USAF...ASSIGNED SAMPLE AIRMAN 35 35 E -4 22 23 E -5 27 26 E -6 11 12 E -7 5 4 E -8 * E -9 * TOTALS 100 100 DENOTES LESS THAN ONE PERCENT TABLE 3 TAFHS

  5. Mesoscopic Vortex–Meissner currents in ring ladders

    NASA Astrophysics Data System (ADS)

    Haug, Tobias; Amico, Luigi; Dumke, Rainer; Kwek, Leong-Chuan

    2018-07-01

    Recent experimental progress have revealed Meissner and Vortex phases in low-dimensional ultracold atoms systems. Atomtronic setups can realize ring ladders, while explicitly taking the finite size of the system into account. This enables the engineering of quantized chiral currents and phase slips in between them. We find that the mesoscopic scale modifies the current. Full control of the lattice configuration reveals a reentrant behavior of Vortex and Meissner phases. Our approach allows a feasible diagnostic of the currents’ configuration through time-of-flight measurements.

  6. Evolutionary responses by native species to major anthropogenic changes to their ecosystems: Pacific salmon in the Columbia River hydropower system.

    PubMed

    Waples, Robin S; Zabel, Richard W; Scheuerell, Mark D; Sanderson, Beth L

    2008-01-01

    The human footprint is now large in all the Earth's ecosystems, and construction of large dams in major river basins is among the anthropogenic changes that have had the most profound ecological consequences, particularly for migratory fishes. In the Columbia River basin of the western USA, considerable effort has been directed toward evaluating demographic effects of dams, yet little attention has been paid to evolutionary responses of migratory salmon to altered selective regimes. Here we make a first attempt to address this information gap. Transformation of the free-flowing Columbia River into a series of slack-water reservoirs has relaxed selection for adults capable of migrating long distances upstream against strong flows; conditions now favour fish capable of migrating through lakes and finding and navigating fish ladders. Juveniles must now be capable of surviving passage through multiple dams or collection and transportation around the dams. River flow patterns deliver some groups of juvenile salmon to the estuary later than is optimal for ocean survival, but countervailing selective pressures might constrain an evolutionary response toward earlier migration timing. Dams have increased the cost of migration, which reduces energy available for sexual selection and favours a nonmigratory life history. Reservoirs are a benign environment for many non-native species that are competitors with or predators on salmon, and evolutionary responses are likely (but undocumented). More research is needed to tease apart the relative importance of evolutionary vs. plastic responses of salmon to these environmental changes; this research is logistically challenging for species with life histories like Pacific salmon, but results should substantially improve our understanding of key processes. If the Columbia River is ever returned to a quasinatural, free-flowing state, remaining populations might face a Darwinian debt (and temporarily reduced fitness) as they struggle to re-evolve historical adaptations.

  7. Superintegrability of the Fock-Darwin system

    NASA Astrophysics Data System (ADS)

    Drigho-Filho, E.; Kuru, Ş.; Negro, J.; Nieto, L. M.

    2017-08-01

    The Fock-Darwin system is analyzed from the point of view of its symmetry properties in the quantum and classical frameworks. The quantum Fock-Darwin system is known to have two sets of ladder operators, a fact which guarantees its solvability. We show that for rational values of the quotient of two relevant frequencies, this system is superintegrable, the quantum symmetries being responsible for the degeneracy of the energy levels. These symmetries are of higher order and close a polynomial algebra. In the classical case, the ladder operators are replaced by ladder functions and the symmetries by constants of motion. We also prove that the rational classical system is superintegrable and its trajectories are closed. The constants of motion are also generators of symmetry transformations in the phase space that have been integrated for some special cases. These transformations connect different trajectories with the same energy. The coherent states of the quantum superintegrable system are found and they reproduce the closed trajectories of the classical one.

  8. System-wide analysis of the transcriptional network of human myelomonocytic leukemia cells predicts attractor structure and phorbol-ester-induced differentiation and dedifferentiation transitions

    NASA Astrophysics Data System (ADS)

    Sakata, Katsumi; Ohyanagi, Hajime; Sato, Shinji; Nobori, Hiroya; Hayashi, Akiko; Ishii, Hideshi; Daub, Carsten O.; Kawai, Jun; Suzuki, Harukazu; Saito, Toshiyuki

    2015-02-01

    We present a system-wide transcriptional network structure that controls cell types in the context of expression pattern transitions that correspond to cell type transitions. Co-expression based analyses uncovered a system-wide, ladder-like transcription factor cluster structure composed of nearly 1,600 transcription factors in a human transcriptional network. Computer simulations based on a transcriptional regulatory model deduced from the system-wide, ladder-like transcription factor cluster structure reproduced expression pattern transitions when human THP-1 myelomonocytic leukaemia cells cease proliferation and differentiate under phorbol myristate acetate stimulation. The behaviour of MYC, a reprogramming Yamanaka factor that was suggested to be essential for induced pluripotent stem cells during dedifferentiation, could be interpreted based on the transcriptional regulation predicted by the system-wide, ladder-like transcription factor cluster structure. This study introduces a novel system-wide structure to transcriptional networks that provides new insights into network topology.

  9. Management of pain in advanced disease.

    PubMed

    Harris, Dylan G

    2014-06-01

    Pain is common in advanced malignancy but also prevalent in other non-malignant life-limiting diseases such as advanced heart disease; end stage renal failure and multiple sclerosis. Patients with renal or liver impairment need specific consideration, as most analgesics rely on either or both for their metabolism and excretion. Recent evidence-based guidelines and the systematic reviews that have informed their recommendations. The principles of the WHO (World Health Organisation) analgesic ladder are commonly endorsed as a structured approach to the management of pain. For neuropathic pain, the efficacy of different agents is similar and choice of drug more guided by side effects, drug interactions and cost. Evidence supporting the WHO analgesic ladder is disputed and alternatives suggested, but no overwhelming evidence for an alternative approach exists to date. Alternative approaches to the WHO analgesic ladder, new analgesic agents, e.g. rapid onset oral/intranasal fentanyl. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  10. Physical Employment Standards for UK Firefighters

    PubMed Central

    Stevenson, Richard D.M.; Siddall, Andrew G.; Turner, Philip F.J.; Bilzon, James L.J.

    2017-01-01

    Objective: The aim of this study was to assess sensitivity and specificity of surrogate physical ability tests as predictors of criterion firefighting task performance and to identify corresponding minimum muscular strength and endurance standards. Methods: Fifty-one (26 male; 25 female) participants completed three criterion tasks (ladder lift, ladder lower, ladder extension) and three corresponding surrogate tests [one-repetition maximum (1RM) seated shoulder press; 1RM seated rope pull-down; repeated 28 kg seated rope pull-down]. Surrogate test standards were calculated that best identified individuals who passed (sensitivity; true positives) and failed (specificity; true negatives) criterion tasks. Results: Best sensitivity/specificity achieved were 1.00/1.00 for a 35 kg seated shoulder press, 0.79/0.92 for a 60 kg rope pull-down, and 0.83/0.93 for 23 repetitions of the 28 kg rope pull-down. Conclusions: These standards represent performance on surrogate tests commensurate with minimum acceptable performance of essential strength-based occupational tasks in UK firefighters. PMID:28045801

  11. Analysis of an "off-ladder" allele at the Penta D short tandem repeat locus.

    PubMed

    Yang, Y L; Wang, J G; Wang, D X; Zhang, W Y; Liu, X J; Cao, J; Yang, S L

    2015-11-25

    Kinship testing of a father and his son from Guangxi, China, the location of the Zhuang minority people, was performed using the PowerPlex® 18D System with a short tandem repeat typing kit. The results indicated that both the father and his son had an off-ladder allele at the Penta D locus, with a genetic size larger than that of the maximal standard allelic ladder. To further identify this locus, monogenic amplification, gene cloning, and genetic sequencing were performed. Sequencing analysis demonstrated that the fragment size of the Penta D-OL locus was 469 bp and the core sequence was [AAAGA]21, also called Penta D-21. The rare Penta D-21 allele was found to be distributed among the Zhuang population from the Guangxi Zhuang Autonomous Region of China; therefore, this study improved the range of DNA data available for this locus and enhanced our ability for individual identification of gene loci.

  12. ESR modes in a Strong-Leg Ladder in the Tomonaga-Luttinger Liquid Phase

    NASA Astrophysics Data System (ADS)

    Zvyagin, S.; Ozerov, M.; Maksymenko, M.; Wosnitza, J.; Honecker, A.; Landee, C. P.; Turnbull, M.; Furuya, S. C.; Giamarchi, T.

    Magnetic excitations in the strong-leg quantum spin ladder compound (C7H10N)2CuBr4 (known as DIMPY) in the field-induced Tomonaga-Luttinger spin liquid phase are studied by means of high-field electron spin resonance (ESR) spectroscopy. The presence of a gapped ESR mode with unusual non-linear frequency-field dependence is revealed experimentally. Using a combination of analytic and exact diagonalization methods, we compute the dynamical structure factor and identify this mode with longitudinal excitations in the antisymmetric channel. We argue that these excitations constitute a fingerprint of the spin dynamics in a strong-leg spin-1/2 Heisenberg antiferromagnetic ladder and owe its ESR observability to the uniform Dzyaloshinskii-Moriya interaction. This work was partially supported by the DFG and Helmholtz Gemeinschaft (Germany), Swiss SNF under Division II, and ERC synergy UQUAM project. We acknowledge the support of the HLD at HZDR, member of the European Magnetic Field Laboratory (EMFL).

  13. Algebraic special functions and SO(3,2)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Celeghini, E., E-mail: celeghini@fi.infn.it; Olmo, M.A. del, E-mail: olmo@fta.uva.es

    2013-06-15

    A ladder structure of operators is presented for the associated Legendre polynomials and the sphericas harmonics. In both cases these operators belong to the irreducible representation of the Lie algebra so(3,2) with quadratic Casimir equals to −5/4. As both are also bases of square-integrable functions, the universal enveloping algebra of so(3,2) is thus shown to be homomorphic to the space of linear operators acting on the L{sup 2} functions defined on (−1,1)×Z and on the sphere S{sup 2}, respectively. The presence of a ladder structure is suggested to be the general condition to obtain a Lie algebra representation defining inmore » this way the “algebraic special functions” that are proposed to be the connection between Lie algebras and square-integrable functions so that the space of linear operators on the L{sup 2} functions is homomorphic to the universal enveloping algebra. The passage to the group, by means of the exponential map, shows that the associated Legendre polynomials and the spherical harmonics support the corresponding unitary irreducible representation of the group SO(3,2). -- Highlights: •The algebraic ladder structure is constructed for the associated Legendre polynomials (ALP). •ALP and spherical harmonics support a unitary irreducible SO(3,2)-representation. •A ladder structure is the condition to get a Lie group representation defining “algebraic special functions”. •The “algebraic special functions” connect Lie algebras and L{sup 2} functions.« less

  14. Phase transitions and magnetization of the mixed-spin Ising–Heisenberg double sawtooth frustrated ladder

    NASA Astrophysics Data System (ADS)

    Arian Zad, Hamid; Ananikian, Nerses

    2018-04-01

    The mixed spin-(1,1/2) Ising–Heisenberg double sawtooth ladder containing a mixture of both spin-1 and spin-1/2 nodal atoms, and the spin-1/2 interstitial dimers are approximately solved by the transfer-matrix method. Here, we study in detail the ground-state phase diagrams, also influences of the bilinear exchange coupling on the rungs and cyclic four-spin exchange interaction in square plaquette of each block on the magnetization and magnetic susceptibility of the suggested ladder at low temperature. Such a double sawtooth ladder may be found in a Shastry-Sutherland lattice-type. In spite of the spin ordering of odd and even blocks being different from each other, due to the commutation relation between all different block Hamiltonians, phase diagrams, magnetization behavior and thermodynamic properties of the model are the same for odd and even blocks. We show that at low temperature, both exchange couplings can change the quality and quantity of the magnetization plateaus versus the magnetic field changes. Specially, we find a new magnetization plateau M/Ms= 5/6 for this model. Besides, we examine the magnetic susceptibility and specific heat of the model in detail. It is proven that behaviors of the magnetization and the magnetic susceptibility coincide at low temperature. The specific heat displays diverse temperature dependencies, which include a Schottky-type peak at a special temperature interval. We observe that with increase of the bilinear exchange coupling on the rungs, second peak temperature dependence grows.

  15. Clinical career ladders: the Moses H. Cone Memorial Hospital.

    PubMed

    Crouch, J B; Douglas, J B; Wheeler, D S

    1989-11-01

    A competence- and achievement-based advancement program developed for pharmacists at The Moses H. Cone Memorial Hospital, a 530-bed community teaching hospital, is described. In 1985 pharmacy management recognized the need to provide an incentive program to reward achievements by staff clinical pharmacists, recognize their increased responsibilities, and increase the department's ability to retain qualified practitioners. Adding another rung to the existing administrative career ladder was not desirable, so a new job category, pharmacist II, was created. Employees are evaluated for promotion to pharmacist II on the basis of tenure, performance, and elective professional and service activities. A point system is used to objectively score achievements; to be promoted, an employee must accumulate 50 points during a two-year period. The number of staff pharmacists who can advance is limited not arbitrarily but rather by the application of challenging criteria. Employees are responsible for submitting documentation of their achievements to a review committee, which meets quarterly to evaluate applications and award points. Of 13 applicants since 1985, 10 have been promoted. Because of problems in evaluating the performance of pharmacist II employees, providing them time to conduct research, and incorporating specialty practice areas into the program, plans are being made to institute a more structured career ladder system with separate managerial, clinical, and educational tracks. A competence- and achievement-based advancement program with a single step was an improvement over the former system but lacked the balance and comprehensiveness offered by more structured career ladder programs.

  16. Creating a Professional Ladder for Interpreters for Improvement of Care.

    PubMed

    Marshall, Lori; Fischer, Anna; Noyes Soeller, Allison; Cordova, Richard; Gutierrez, Yvonne R; Alford, Luis

    2016-01-01

    Children's Hospital Los Angeles (CHLA), a metropolitan academic medical center, recognized limitations in how the professional interpreters from the Diversity Services Department were used to support effective patient-provider communication across the organization. Given the importance of mitigating language and communication barriers, CHLA sought to minimize clinical and structural barriers to health care for limited English proficiency populations through a comprehensive restructuring of the Diversity Services Department. This approach entailed a new delivery model for hospital language assistance and cultural consultancy resources. The intervention focused on restructuring the Diversity Services Department, redefining priorities, reallocating resources, and redefining the roles of the language staff positions in the department. The language staff role was redesigned to fit a four-level professional career ladder modeled after the professional career ladders commonly used in hospitals for the RN role and other professional disciplines. The approach involved creating new levels of language specialist, each with progressive requirements for performance, leadership, and accountability for patient care outcomes. Language staff in the inpatient, clinic, and emergency department settings worked alongside nurses, physicians, and other disciplines to care for a specific set of patients. The result of this work was a positive culture change resulting in service efficiencies, care improvements, and improved access to language services. A professional career ladder for language staff contributed to improving the quality and access of language services and advancing the interpreting profession by incorporating care coordination support, vital document translation, and cultural consultancy.

  17. Administration and Stenographic Career Ladders, AFS 702x0/A/B/C and 702X1.

    DTIC Science & Technology

    1980-04-01

    MEN mIIIIIIIII hhhllllhlhhl UNITED STATES AIR FORCE _Si -j𔃽.- 0 ADMINISTRATION AND5$TENOGRAPHIC -CAREER LADDERS AIS 702XO/ A /B/C AND 702X1 -J AFPT- 9...7J2-389 ( ,/ " ’ _ LA. -IAPRI 180 This document has n a :’.-pro+ved1 + ,for pil s’ s ;i - , OqCUPATIONAL ANALYSIS PROGRAM USAF OCCUPATIONAL...79 APPENDIX A O--------------------------------------------- 80 Acc22~C~For 1 -* ii L PREFACE This report presents the results of a detailed Air

  18. Damage Evaluation for Ti Alloys in Creep based on Incompatibility Field Measurement via EBSD Technique and Micro-Pillar Experiments Toward Identification of Roles of Dislocation Substructures on Fatigue Crack Initiation

    DTIC Science & Technology

    2011-02-07

    Reproduction of a slip band with a PSB -ladder-like internal structure is attempted assuming initial conditions with and without corresponding strain...into heat at the PSB region, the present study extensively examined possible transition mechanisms toward the growth of grooves thereabout and that...arrangements even with the same dislocation density. (2)A slip band-like region having a substructure mimicking PSB ladder is demonstrated to be

  19. Optical Spectra of the Jaynes-Cummings Ladder

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Laussy, Fabrice P.; Valle, Elena del

    2009-06-29

    We explore how the Jaynes-Cummings ladder transpires in the emitted spectra of a two-level system in strong coupling with a single mode of light. We focus on the case of very strong coupling, that would be achieved with systems of exceedingly good quality (very long lifetimes for both the emitter and the cavity). We focus on the incoherent regime of excitation, that is realized with semiconductors quantum dots in microcavities, and discuss how reasonable is the understanding of the systems in terms of transitions between dressed states of the Jaynes-Cummings Hamiltonian.

  20. Apollo 12 Mission image - Dark view of Astronaut Alan L. Bean climbing down the ladder of the Lunar Module (LM)

    NASA Image and Video Library

    1969-11-19

    AS12-46-6726 (19 Nov. 1969) --- Astronaut Alan L. Bean, lunar module pilot for the Apollo 12 mission, starts down the ladder of the Lunar Module (LM) to join astronaut Charles Conrad Jr., mission commander, in extravehicular activity (EVA). While astronauts Conrad and Bean descended in the LM "Intrepid" to explore the Ocean of Storms region of the moon, astronaut Richard F. Gordon Jr., command module pilot, remained with the Command and Service Modules (CSM) "Yankee Clipper" in lunar orbit.

  1. Bounded solutions in a T-shaped waveguide and the spectral properties of the Dirichlet ladder

    NASA Astrophysics Data System (ADS)

    Nazarov, S. A.

    2014-08-01

    The Dirichlet problem is considered on the junction of thin quantum waveguides (of thickness h ≪ 1) in the shape of an infinite two-dimensional ladder. Passage to the limit as h → +0 is discussed. It is shown that the asymptotically correct transmission conditions at nodes of the corresponding one-dimensional quantum graph are Dirichlet conditions rather than the conventional Kirchhoff transmission conditions. The result is obtained by analyzing bounded solutions of a problem in the T-shaped waveguide that the boundary layer phenomenon.

  2. Ising versus S U (2) 2 string-net ladder

    NASA Astrophysics Data System (ADS)

    Vidal, Julien

    2018-03-01

    We consider the string-net model obtained from S U (2) 2 fusion rules. These fusion rules are shared by two different sets of anyon theories. In this paper, we study the competition between the two corresponding non-Abelian quantum phases in the ladder geometry. A detailed symmetry analysis shows that the nontrivial low-energy sector corresponds to the transverse-field cluster model that displays a critical point described by the s o (2) 1 conformal field theory. Other sectors are obtained by freezing spins in this model.

  3. Whole-body vibration in heavy equipment operators of a front-end loader: role of task exposure and tire configuration with and without traction chains.

    PubMed

    Blood, Ryan P; Rynell, Patrik W; Johnson, Peter W

    2012-12-01

    This study measured whole-body vibration (WBV) exposures in front-end loader operators, and evaluated the effects of traction chains and work tasks on their WBV exposures. WBV exposures were measured and compared across three different front-end loader tire configurations: (a) stock rubber tires, (b) rubber tires with ladder chains, and (c) rubber tires with basket chains. The operators completed three distinct standardized tasks: driving on a city street, simulated plowing, and a simulated scooping and dumping task. A portable data acquisition system collected tri-axial time weighted and raw WBV data per ISO 2631-1 and 2631-5 standards. In addition, Global Positioning System (GPS) data were collected in order to compare loader speeds across tire conditions and the standardized tasks. Relative to the stock rubber tires, both types of tire chains significantly increased WBV exposures with the ladder chains having substantially higher WBV exposures compared to basket chains. Additionally, there were task dependent differences in WBV exposures. During the driving task, the z-axis (up and down) was the predominant exposure; the plowing task had a more even distribution of exposure across all three axes; while during scooping and dumping task, the x-axis (fore and aft) had the highest WBV exposures. The GPS data indicated that there were significant speed differences across tasks but not between the basket and ladder chain conditions. Tires with ladder chains increased the front-end loader operators' exposure to WBV above the ISO 2631-1 recommended eight hour action limit increasing risk for adverse health effects. Although more expensive, basket chains are recommended over ladder chains since they substantially lowered the front-end loader operator's exposures and may ultimately reduce vibration related wear and tear on the vehicle. In order to reduce a heavy equipment vehicle (HEV) operator's chances for developing low back pain, this study provides information that health and safety professionals can use to reduce whole-body vibration (WBV) exposures when operating front-end wheel loaders with traction chains. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

  4. Critical thinking competence and disposition of clinical nurses in a medical center.

    PubMed

    Feng, Rung-Chuang; Chen, Mei-Jung; Chen, Mei-Chuan; Pai, Yu-Chu

    2010-06-01

    Critical thinking is essential in nursing practice. Promoting critical thinking competence in clinical nurses is an important way to improve problem solving and decision-making competence to further improve the quality of patient care. However, using an adequate tool to test nurses' critical thinking competence and disposition may provide the reference criteria for clinical nurse characterization, training planning, and resource allocation for human resource management. The purpose of this study was to measure the critical thinking competence and critical thinking disposition of clinical nurses as well as to explore the related factors of critical thinking competence. Clinical nurses from four different clinical ladders selected from one medical center were stratified randomly. All qualified subjects who submitted valid questionnaires were included in the study. A Taiwan version of the modified Watson-Glaser Critical Thinking Appraisal and Critical Thinking Disposition Inventory was developed to measure the critical thinking competence and critical thinking disposition of clinical nurses. Validity was evaluated using the professional content test (content validity index = .93). Reliability was assessed with a Cronbach's alpha coefficient of .85. Data were analyzed using the SPSS for Windows (Version 12.0; SPSS Inc., Chicago, IL). Results showed that competence of interpretation was the highest critical thinking competence factor. Inference was the lowest, and reflective thinking as a critical thinking disposition was more positive. In addition, age, years of nursing experience, and experiences in other hospitals significantly influenced critical thinking competence (p < .05). Factors of age, years of experience, and nurses clinical ladder were shown to affect critical thinking disposition scores. Clinical ladder N4 nurses had the highest scores in both competence and disposition. A significant relationship was found between critical thinking competence and disposition scores, with 29.3% of the variance in critical thinking competence potentially explained by total years of nurse hospital experience. Clinical ladder and age were predictive factors for critical thinking disposition. Commonality was 27.9%. Nursing experience and clinical ladders positively affect critical thinking competence and disposition. Issues of critical thinking competence increasingly need to be measured. Therefore, appropriate tools for nursing professions should be further developed and explored for specific areas of practice.

  5. [Ladder step strategy for surgical repair of congenital concealed penis in children].

    PubMed

    Wang, Fu-Ran; Zhong, Hong-Ji; Chen, Yi; Zhao, Jun-Feng; Li, Yan

    2016-11-01

    To assess the feasibility of the ladder step strategy in surgical repair of congenital concealed penis in children. This study included 52 children with congenital concealed penis treated in the past two years by surgical repair using the ladder step strategy, which consists of five main steps: cutting the narrow ring of the foreskin, degloving the penile skin, fixing the penile skin at the base, covering the penile shaft, and reshaping the prepuce. The perioperative data of the patients were prospectively collected and statistically described. Of the 52 patients, 20 needed remodeling of the frenulum and 27 received longitudinal incision in the penoscrotal junction to expose and deglove the penile shaft. The advanced scrotal flap technique was applied in 8 children to cover the penile shaft without tension, the pedicled foreskin flap technique employed in 11 to repair the penile skin defect, and excision of the webbed skin of the ventral penis performed in another 44 to remodel the penoscrotal angle. The operation time, blood loss, and postoperative hospital stay were 40－100 minutes, 5－30 ml, and 3－6 days, respectively. Wound bleeding and infection occurred in 1 and 5 cases, respectively. Follow-up examinations at 3 and 6 months after surgery showed that all the children had a satisfactory penile appearance except for some minor complications (2 cases of penile retraction, 2 cases of redundant ventral skin, and 1 case of iatrogenic penile curvature). The ladder step strategy for surgical repair of congenital concealed penis in children is a simple procedure with minor injury and satisfactory appearance of the penis.

  6. Attitude symbology for helmet-mounted displays: lessons learned

    NASA Astrophysics Data System (ADS)

    Drewery, Chris C.; Davy, Eleanor C.; Dudfield, Helen J.

    1997-06-01

    This paper will review recent research on attitude symbology on helmet-mounted displays (HMDs) for the air-to-ground mission. General issues concerned with HMDs will be discussed and the lessons learned during the research will be outlined. It is suggested that a sound development approach to HMD symbology is critical since such symbology will constantly follow the pilot's line of sight (LOS). Further, the HMD field-of-view (FOV) is likely to be limited. Hence, if HMDs are to be used operationally for more than weapon aiming a number of human factors issues need to be investigated, such as the optimal method of presenting attitude information. The pitch ladder was designed to be presented along the boresight, directly in the pilot's LOS, at a fixed frame of reference. As pilots are used to and have been trained upon attitude information presented in consistency with the forward LOS, information representative of the pitch ladder may be beneficial on HMDs. None the less, since the pitch ladder was not designed for the HMD, novel formats may be more appropriate. As with all novel attitude symbology, enhanced operational performance must always be demonstrated and substantiated against the conventional existing symbology. Several experiments will be described which compared the pitch ladder to novel symbology, namely: the cylinder display; the arc segmented attitude reference display; and the modified roll-pitch display. These experiments were conducted using a variety of operationally relevant mission tasks and scenarios. The results will be summarized and the lessons learned for prototyping attitude symbology on HMDs will be discussed.

  7. Non-local electron transport through normal and topological ladder-like atomic systems

    NASA Astrophysics Data System (ADS)

    Kurzyna, Marcin; Kwapiński, Tomasz

    2018-05-01

    We propose a locally protected ladder-like atomic system (nanoconductor) on a substrate that is insensitive to external perturbations. The system corresponds to coupled atomic chains fabricated on different surfaces. Electron transport properties of such conductors are studied theoretically using the model tight-binding Su-Schriffer-Hegger (SSH) Hamiltonian and Green's function formalism. We have found that the conductance of the system is almost insensitive to single adatoms and oscillates as a function of the side chain length with very large periods. Non-local character of the electron transport was observed also for topological SSH chains where nontrivial end states survive in the presence of disturbances as well as for different substrates. We have found that the careful inspection of the density of states or charge waves can provide the information about the atom energy levels and hopping amplitudes. Moreover, the ladder-like geometry allows one to distinguish between normal and topological zero-energy states. It is important that topological chains do not reveal Friedel oscillations which are observed in non-topological chains.

  8. Two-leg ladder systems with dipole–dipole Fermion interactions

    NASA Astrophysics Data System (ADS)

    Mosadeq, Hamid; Asgari, Reza

    2018-05-01

    The ground-state phase diagram of a two-leg fermionic dipolar ladder with inter-site interactions is studied using density matrix renormalization group (DMRG) techniques. We use a state-of-the-art implementation of the DMRG algorithm and finite size scaling to simulate large system sizes with high accuracy. We also consider two different model systems and explore stable phases in half and quarter filling factors. We find that in the half filling, the charge and spin gaps emerge in a finite value of the dipole–dipole and on-site interactions. In the quarter filling case, s-wave superconducting state, charge density wave, homogenous insulating and phase separation phases occur depend on the interaction values. Moreover, in the dipole–dipole interaction, the D-Mott phase emerges when the hopping terms along the chain and rung are the same, whereas, this phase has been only proposed for the anisotropic Hubbard model. In the half filling case, on the other hand, there is either charge-density wave or charged Mott order phase depends on the orientation of the dipole moments of the particles with respect to the ladder geometry.

  9. Enhancement in Open-Circuit Voltage in Organic Solar Cells by Using Ladder-Type Nonfullerene Acceptors

    DOE PAGES

    Cai, Zhengxu; Zhao, Donglin; Sharapov, Valerii; ...

    2018-03-28

    The open-circuit voltage (V oc) loss has always been a major factor in lowering power conversion efficiencies (PCEs) in bulk heterojunction organic photovoltaic cells (OPVs). A method to improve the V oc is indispensable to achieve high PCEs. Here in this paper, we investigated a series of perylene diimide-based ladder-type molecules as electron acceptors in nonfullerene OPVs. The D-A ladder-type structures described here lock our pi-systems into a planar structure and eliminate bond twisting associated with linear conjugated systems. This enlarges the interface energy gap (ΔE DA), extends electronic delocalization, and hence improves the V oc. More importantly, these devicesmore » showed an increase in V oc without compromising either the J sc or the FF. C5r exhibited a strong intermolecular interaction and a PCE value of 6.1%. Moreover, grazing-incident wide-angle X-ray scattering analysis and atomic force microscopy images suggested that our fused-ring acceptors showed a suitable domain size and uniform blend films, which were not affected by their rigid molecular structures.« less

  10. Color-suppression of non-planar diagrams in bosonic bound states

    NASA Astrophysics Data System (ADS)

    Alvarenga Nogueira, J. H.; Ji, Chueng-Ryong; Ydrefors, E.; Frederico, T.

    2018-02-01

    We study the suppression of non-planar diagrams in a scalar QCD model of a meson system in 3 + 1 space-time dimensions due to the inclusion of the color degrees of freedom. As a prototype of the color-singlet meson, we consider a flavor-nonsinglet system consisting of a scalar-quark and a scalar-antiquark with equal masses exchanging a scalar-gluon of a different mass, which is investigated within the framework of the homogeneous Bethe-Salpeter equation. The equation is solved by using the Nakanishi representation for the manifestly covariant bound-state amplitude and its light-front projection. The resulting non-singular integral equation is solved numerically. The damping of the impact of the cross-ladder kernel on the binding energies are studied in detail. The color-suppression of the cross-ladder effects on the light-front wave function and the elastic electromagnetic form factor are also discussed. As our results show, the suppression appears significantly large for Nc = 3, which supports the use of rainbow-ladder truncations in practical non-perturbative calculations within QCD.

  11. Interplay of magnetism and superconductivity in the compressed Fe-ladder compound BaFe 2 Se 3

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ying, Jianjun; Lei, Hechang; Petrovic, Cedomir

    High pressure resistance, susceptibility, and Fe K β x-ray emission spectroscopy measurements were performed on Fe-ladder compound BaFe 2 Se 3 . Pressure-induced superconductivity was observed which is similar to the previously reported superconductivity in the BaFe 2 S 3 samples. The slope of local magnetic moment versus pressure shows an anomaly across the insulator-metal transition pressure in the BaFe 2 Se 3 samples. The local magnetic moment is continuously decreasing with increasing pressure, and the superconductivity appears only when the local magnetic moment value is comparable to the one in the iron-pnictide superconductors. Our results indicate that the compressedmore » BaFe 2 C h 3 ( C h = S , Se) is a new family of iron-based superconductors. Despite the crystal structures completely different from the known iron-based superconducting materials, the magnetism in this Fe-ladder material plays a critical role in superconductivity. This behavior is similar to the other members of iron-based superconducting materials.« less

  12. Enhancement in Open-Circuit Voltage in Organic Solar Cells by Using Ladder-Type Nonfullerene Acceptors.

    PubMed

    Cai, Zhengxu; Zhao, Donglin; Sharapov, Valerii; Awais, Mohammad A; Zhang, Na; Chen, Wei; Yu, Luping

    2018-04-25

    The open-circuit voltage ( V oc ) loss has always been a major factor in lowering power conversion efficiencies (PCEs) in bulk heterojunction organic photovoltaic cells (OPVs). A method to improve the V oc is indispensable to achieve high PCEs. In this paper, we investigated a series of perylene diimide-based ladder-type molecules as electron acceptors in nonfullerene OPVs. The D-A ladder-type structures described here lock our π-systems into a planar structure and eliminate bond twisting associated with linear conjugated systems. This enlarges the interface energy gap (Δ E DA ), extends electronic delocalization, and hence improves the V oc . More importantly, these devices showed an increase in V oc without compromising either the J sc or the FF. C5r exhibited a strong intermolecular interaction and a PCE value of 6.1%. Moreover, grazing-incident wide-angle X-ray scattering analysis and atomic force microscopy images suggested that our fused-ring acceptors showed a suitable domain size and uniform blend films, which were not affected by their rigid molecular structures.

  13. Enhancement in Open-Circuit Voltage in Organic Solar Cells by Using Ladder-Type Nonfullerene Acceptors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cai, Zhengxu; Zhao, Donglin; Sharapov, Valerii

    The open-circuit voltage (V oc) loss has always been a major factor in lowering power conversion efficiencies (PCEs) in bulk heterojunction organic photovoltaic cells (OPVs). A method to improve the V oc is indispensable to achieve high PCEs. Here in this paper, we investigated a series of perylene diimide-based ladder-type molecules as electron acceptors in nonfullerene OPVs. The D-A ladder-type structures described here lock our pi-systems into a planar structure and eliminate bond twisting associated with linear conjugated systems. This enlarges the interface energy gap (ΔE DA), extends electronic delocalization, and hence improves the V oc. More importantly, these devicesmore » showed an increase in V oc without compromising either the J sc or the FF. C5r exhibited a strong intermolecular interaction and a PCE value of 6.1%. Moreover, grazing-incident wide-angle X-ray scattering analysis and atomic force microscopy images suggested that our fused-ring acceptors showed a suitable domain size and uniform blend films, which were not affected by their rigid molecular structures.« less

  14. Broken Time-Reversal Symmetry in Strongly Correlated Ladder Structures

    NASA Astrophysics Data System (ADS)

    Troyer, Matthias

    2004-03-01

    A decade after the first detailed numerical investigations of strongly correlated ladder models, exotic and interesting phases are still being discovered. Besides charge and spin density wave states with broken translational symmetry, and resonating valence bond (RVB) type superconductivity, a time reversal symmetry borken phase was recently found at half filling [J.B. Marston et al., Phys. Rev. Lett 89, 056404 (2002)]. In this talk I will present our recent results of density matrix renormalization group (DMRG) calculations [Phys. Rev. Lett. 90, 186401 (2003)], where we provide, for the first time, in a doped strongly correlated system (two-leg ladder), a controlled theoretical demonstration of the existence of this state in which long-range ordered orbital currents are arranged in a staggered pattern. This phase, which we found to coexist with a charge density wave, is known in the literature under the names ``staggered flux phase'', ``orbital antiferromagnetism'' or ``d-density wave (DDW)''. This brings us closer to recent proposals that this order might be realized in the enigmatic pseudogap phase of the cuprate high temperature superconductors.

  15. Terahertz cascades from nanoparticles

    NASA Astrophysics Data System (ADS)

    Arnardottir, K. B.; Liew, T. C. H.

    2018-05-01

    In this article we propose a system capable of terahertz (THz) radiation with quantum yield above unity. The system consists of nanoparticles where the material composition varies along the radial direction of each nanoparticle in such a way that a ladder of equidistant energy levels emerges. By then exciting the highest level of this ladder we produce multiple photons of the same frequency in the THz range. We demonstrate how we can calculate a continuous material composition profile that achieves a high quantum yield and then show that a more experimentally friendly design of a multishell nanoparticle can still result in a high quantum yield.

  16. Quark scalar, axial and tensor charges in the Schwinger-Dyson formalism

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yamanaka, Nodoka

    2016-01-22

    The quark scalar, axial and tensor charges of nucleon are calculated in the Schwinger-Dyson formalism. We first calculate these charges in the rainbow-ladder truncation using the IR cut quark-gluon vertex, and show that the result is in agreement with the known data. We then perform the same calculation with the phenomenological IR singular quark-gluon vertex. In this case, the Schwinger-Dyson equation does not converge. We show that this result suggests the requirement of additional corrections to the rainbow-ladder truncation, due to the interaction between quark and gluons in the deep IR region.

  17. Error-associated behaviors and error rates for robotic geology

    NASA Technical Reports Server (NTRS)

    Anderson, Robert C.; Thomas, Geb; Wagner, Jacob; Glasgow, Justin

    2004-01-01

    This study explores human error as a function of the decision-making process. One of many models for human decision-making is Rasmussen's decision ladder [9]. The decision ladder identifies the multiple tasks and states of knowledge involved in decision-making. The tasks and states of knowledge can be classified by the level of cognitive effort required to make the decision, leading to the skill, rule, and knowledge taxonomy (Rasmussen, 1987). Skill based decisions require the least cognitive effort and knowledge based decisions require the greatest cognitive effort. Errors can occur at any of the cognitive levels.

  18. Studies toward brevisulcenal F via convergent strategies for marine ladder polyether synthesis.

    PubMed

    Katcher, Matthew; Jamison, Timothy F

    2018-03-15

    Shortly after the initial isolation of marine ladder polyether natural products, biomimetic epoxide-opening cascade reactions were proposed as an efficient strategy for the synthesis of these compounds. However, difficulties in assembling the cascade precursors have limited the realization of these cascades. In this report, we describe strategies that provide convergent access to cascade precursors via regioselective allylation and efficient fragment coupling. We then investigate epoxide-opening cascades promoted by strong bases for the formation of fused tetrahydropyrans. These strategies are evaluated in the context of the synthesis of rings CDEFG of brevisulcenal F.

  19. Geometric effect on second harmonic generation from gold grating

    NASA Astrophysics Data System (ADS)

    Lu, Jiao; Ding, Baoyong; Huo, Yanyan; Ning, Tingyin

    2018-05-01

    We numerically investigate second harmonic generation from gold gratings of an ideal rectangular and ladder-shaped cross-section. The SHG efficiency from the gold gratings of the ladder-shaped cross-section is significantly enhanced compared with that from the ideal rectangular cross-section with a maximum enhancement factor of around two. The enhancement is ascribe to the nanostructure dependent local fundamental electric field, the nonlinear sources and thus the far field radiation. Our results have a practical meaning in the explanation of experimental SHG measurement, and the modulation of SHG response in the metallic nanostructure.

  20. Demonstration of the Jaynes-Cummings ladder with Rydberg-dressed atoms

    DOE PAGES

    Lee, Jongmin; Martin, Michael J.; Jau, Yuan-Yu; ...

    2017-04-06

    Here, we observe the nonlinearity of the Jaynes-Cummings (JC) ladder in the Autler-Townes spectroscopy of the hyperfine ground states for a Rydberg-dressed two-atom system. The role of the two-level system in the JC model is played by the presence or absence of a collective Rydberg excitation, and the bosonic mode manifests as the number n of single-atom spin flips, symmetrically distributed between the atoms. We also measure the normal-mode splitting and √ n nonlinearity as a function of detuning and Rabi frequency, thereby experimentally establishing the isomorphism with the JC model.

  1. Magnetic phase diagram of a frustrated spin ladder

    NASA Astrophysics Data System (ADS)

    Sugimoto, Takanori; Mori, Michiyasu; Tohyama, Takami; Maekawa, Sadamichi

    2018-04-01

    Frustrated spin ladders show magnetization plateaux depending on the rung-exchange interaction and frustration defined by the ratio of first and second neighbor exchange interactions in each chain. This paper reports on its magnetic phase diagram. Using the variational matrix-product state method, we accurately determine phase boundaries. Several kinds of magnetization plateaux are induced by the frustration and the strong correlation among quasiparticles on a lattice. The appropriate description of quasiparticles and their relevant interactions are changed by a magnetic field. We find that the frustration differentiates the triplet quasiparticle from the singlet one in kinetic energy.

  2. Hidden Order and Symmetry Protected Topological States in Quantum Link Ladders

    NASA Astrophysics Data System (ADS)

    Cardarelli, L.; Greschner, S.; Santos, L.

    2017-11-01

    We show that, whereas spin-1 /2 one-dimensional U(1) quantum-link models (QLMs) are topologically trivial, when implemented in ladderlike lattices these models may present an intriguing ground-state phase diagram, which includes a symmetry protected topological (SPT) phase that may be readily revealed by analyzing long-range string spin correlations along the ladder legs. We propose a simple scheme for the realization of spin-1 /2 U(1) QLMs based on single-component fermions loaded in an optical lattice with s and p bands, showing that the SPT phase may be experimentally realized by adiabatic preparation.

  3. Frustrated quantum magnetism in the Kondo lattice on the zigzag ladder

    NASA Astrophysics Data System (ADS)

    Peschke, Matthias; Rausch, Roman; Potthoff, Michael

    2018-03-01

    The interplay between the Kondo effect, indirect magnetic interaction, and geometrical frustration is studied in the Kondo lattice on the one-dimensional zigzag ladder. Using the density-matrix renormalization group, the ground-state and various short- and long-range spin- and density-correlation functions are calculated for the model at half filling as a function of the antiferromagnetic Kondo interaction down to J =0.3 t , where t is the nearest-neighbor hopping on the zigzag ladder. Geometrical frustration is shown to lead to at least two critical points: Starting from the strong-J limit, where almost local Kondo screening dominates and where the system is a nonmagnetic Kondo insulator, antiferromagnetic correlations between nearest-neighbor and next-nearest-neighbor local spins become stronger and stronger, until at Jcdim≈0.89 t frustration is alleviated by a spontaneous breaking of translational symmetry and a corresponding transition to a dimerized state. This is characterized by antiferromagnetic correlations along the legs and by alternating antiferro- and ferromagnetic correlations on the rungs of the ladder. A mechanism of partial Kondo screening that has been suggested for the Kondo lattice on the two-dimensional triangular lattice is not realized in the one-dimensional case. Furthermore, within the symmetry-broken dimerized state, there is a magnetic transition to a 90∘ quantum spin spiral with quasi-long-range order at Jcmag≈0.84 t . The quantum-critical point is characterized by a closure of the spin gap (with decreasing J ) and a divergence of the spin-correlation length and of the spin-structure factor S (q ) at wave vector q =π /2 . This is opposed to the model on the one-dimensional bipartite chain, which is known to have a finite spin gap for all J >0 at half filling.

  4. Plaquette order in a dimerized frustrated spin ladder

    NASA Astrophysics Data System (ADS)

    Shlagman, Ofer; Shimshoni, Efrat

    2014-11-01

    We study the effect of dimerization (due to, e.g., spin-Peierls instability) on the phase diagram of a frustrated antiferromagnetic spin-1/2 ladder, with weak transverse and diagonal rung coupling. Our analysis focuses on a one-dimensional version of the model (i.e., a single two-leg ladder) where we consider two forms of dimerization on the legs: columnar dimers (CDs) and staggered dimers (SDs). We examine in particular the regime of parameters (corresponding to an intermediate X X Z anisotropy) in which the leg dimerization and the rung coupling terms are equally relevant. In both the CD and SD cases, we find that the effective field theory describing the system is a self-dual sine-Gordon model, which favors ordering and the opening of a gap to excitations. The order parameter, which reflects the interplay between the leg and rung dimerization interactions, represents a crystal of 4-spin plaquettes on which longitudinal and transverse dimers are in a coherent superposition. Depending on the leg dimerization mode, these plaquettes are closed or open, however both types spontaneously break reflection symmetry across the ladder. The closed plaquettes are stable, while the open plaquette order is relatively fragile and the corresponding gap may be tuned to zero under extreme conditions. We further find that a first-order transition occurs from the plaquette order to a valence bond crystal (VBC) of dimers on the legs. This suggests that in a higher-dimensional version of this system, this variety of distinct VBC states with comparable energies leads to the formation of domains. Effectively one-dimensional gapless spinon modes on domain boundaries may account for the experimental observation of spin-liquid behavior in a physical realization of the model.

  5. Compact programmable photonic variable delay devices

    NASA Technical Reports Server (NTRS)

    Yao, X. Steve (Inventor)

    1999-01-01

    Optical variable delay devices for providing variable true time delay to multiple optical beams simultaneously. A ladder-structured variable delay device comprises multiple basic building blocks stacked on top of each other resembling a ladder. Each basic building block has two polarization beamsplitters and a polarization rotator array arranged to form a trihedron; Controlling an array element of the polarization rotator array causes a beam passing through the array element either going up to a basic building block above it or reflect back towards a block below it. The beams going higher on the ladder experience longer optical path delay. An index-switched optical variable delay device comprises of many birefringent crystal segments connected with one another, with a polarization rotator array sandwiched between any two adjacent crystal segments. An array element in the polarization rotator array controls the polarization state of a beam passing through the element, causing the beam experience different refractive indices or path delays in the following crystal segment. By independently control each element in each polarization rotator array, variable optical path delays of each beam can be achieved. Finally, an index-switched variable delay device and a ladder-structured variable device are cascaded to form a new device which combines the advantages of the two individual devices. This programmable optic device has the properties of high packing density, low loss, easy fabrication, and virtually infinite bandwidth. The device is inherently two dimensional and has a packing density exceeding 25 lines/cm.sup.2. The delay resolution of the device is on the order of a femtosecond (one micron in space) and the total delay exceeds 10 nanosecond. In addition, the delay is reversible so that the same delay device can be used for both antenna transmitting and receiving.

  6. Alternative formulation of explicitly correlated third-order Møller-Plesset perturbation theory

    NASA Astrophysics Data System (ADS)

    Ohnishi, Yu-ya; Ten-no, Seiichiro

    2013-09-01

    The second-order wave operator in the explicitly correlated wave function theory has been newly defined as an extension of the conventional s- and p-wave (SP) ansatz (also referred to as the FIXED amplitude ansatz) based on the linked-diagram theorem. The newly defined second-order wave operator has been applied to the calculation of the F12 correction to the third-order many-body perturbation (MP3) energy. In addition to this new wave operator, the F12 correction with the conventional first-order wave operator has been derived and calculated. Among three components of the MP3 correlation energy, the particle ladder contribution, which has shown the slowest convergence with respect to the basis set size, is fairly ameliorated by employing these F12 corrections. Both the newly defined and conventional formalisms of the F12 corrections exhibit a similar recovery of over 90% of the complete basis set limit of the particle ladder contribution of the MP3 correlation energy with a triple-zeta quality basis set for the neon atom, while the amount is about 75% without the F12 correction. The corrections to the ring term are small but the corrected energy has shown similar recovery as the particle ladder term. The hole ladder term has shown a rapid convergence even without the F12 corrections. Owing to these balanced recoveries, the deviation of the total MP3 correlation energy from the complete basis set limit has been calculated to be about 1 kcal/mol with the triple-zeta quality basis set, which is more than five times smaller than the error without the F12 correction.

  7. Photonic variable delay devices based on optical birefringence

    NASA Technical Reports Server (NTRS)

    Yao, X. Steve (Inventor)

    2005-01-01

    Optical variable delay devices for providing variable true time delay to multiple optical beams simultaneously. A ladder-structured variable delay device comprises multiple basic building blocks stacked on top of each other resembling a ladder. Each basic building block has two polarization beamsplitters and a polarization rotator array arranged to form a trihedron; Controlling an array element of the polarization rotator array causes a beam passing through the array element either going up to a basic building block above it or reflect back towards a block below it. The beams going higher on the ladder experience longer optical path delay. An index-switched optical variable delay device comprises of many birefringent crystal segments connected with one another, with a polarization rotator array sandwiched between any two adjacent crystal segments. An array element in the polarization rotator array controls the polarization state of a beam passing through the element, causing the beam experience different refractive indices or path delays in the following crystal segment. By independently control each element in each polarization rotator array, variable optical path delays of each beam can be achieved. Finally, an index-switched variable delay device and a ladder-structured variable device are cascaded to form a new device which combines the advantages of the two individual devices. This programmable optic device has the properties of high packing density, low loss, easy fabrication, and virtually infinite bandwidth. The device is inherently two dimensional and has a packing density exceeding 25 lines/cm2. The delay resolution of the device is on the order of a femtosecond (one micron in space) and the total delay exceeds 10 nanosecond. In addition, the delay is reversible so that the same delay device can be used for both antenna transmitting and receiving.

  8. Molecular Mechanism of Thioflavin-T Binding to the Surface of [beta]-Rich Peptide Self-Assemblies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Biancalana, Matthew; Makabe, Koki; Koide, Akiko

    A number of small organic molecules have been developed that bind to amyloid fibrils, a subset of which also inhibit fibrillization. Among these, the benzothiol dye Thioflavin-T (ThT) has been used for decades in the diagnosis of protein-misfolding diseases and in kinetic studies of self-assembly (fibrillization). Despite its importance, efforts to characterize the ThT-binding mechanism at the atomic level have been hampered by the inherent insolubility and heterogeneity of peptide self-assemblies. To overcome these challenges, we have developed a minimalist approach to designing a ThT-binding site in a 'peptide self-assembly mimic' (PSAM) scaffold. PSAMs are engineered water-soluble proteins that mimicmore » a segment of beta-rich peptide self-assembly, and they are amenable to standard biophysical techniques and systematic mutagenesis. The PSAM beta-sheet contains rows of repetitive amino acid patterns running perpendicular to the strands (cross-strand ladders) that represent a ubiquitous structural feature of fibril-like surfaces. We successfully designed a ThT-binding site that recapitulates the hallmarks of ThT-fibril interactions by constructing a cross-strand ladder consisting of contiguous tyrosines. The X-ray crystal structures suggest that ThT interacts with the beta-sheet by docking onto surfaces formed by a single tyrosine ladder, rather than in the space between adjacent ladders. Systematic mutagenesis further demonstrated that tyrosine surfaces across four or more beta-strands formed the minimal binding site for ThT. Our work thus provides structural insights into how this widely used dye recognizes a prominent subset of peptide self-assemblies, and proposes a strategy to elucidate the mechanisms of fibril-ligand interactions.« less

  9. Control-Structure Ratings on the Fox River at McHenry and Algonquin, Illinois

    USGS Publications Warehouse

    Straub, Timothy D.; Johnson, Gary P.; Hortness, Jon E.; Parker, Joseph R.

    2009-01-01

    The Illinois Department of Natural Resources-Office of Water Resources operates control structures on a reach of the Fox River in northeastern Illinois between McHenry and Algonquin. The structures maintain water levels in the river for flood-control and recreational purposes. This report documents flow ratings for hinged-crest gates, a broad-crested weir, sluice gates, and an ogee spillway on the control structures at McHenry and Algonquin. The ratings were determined by measuring headwater and tailwater stage along with streamflow at a wide range of flows at different gate openings. Standard control-structure rating techniques were used to rate each control structure. The control structures at McHenry consist of a 221-feet(ft)-long broad-crested weir, a 4-ft-wide fish ladder, a 50-ft-wide hinged-crest gate, five 13.75-ft-wide sluice gates, and a navigational lock. Sixty measurements were used to rate the McHenry structures. The control structures at Algonquin consist of a 242-ft-long ogee spillway and a 50-ft-wide hinged-crest gate. Forty-one measurements were used to rate the Algonquin control structures.

  10. Geomorphic and Ecological Issues in Removal of Sediment-Filled Dams in the California Coast Ranges (Invited)

    NASA Astrophysics Data System (ADS)

    Kondolf, G. M.; Oreilly, C.

    2010-12-01

    Water-supply reservoirs in the actively eroding California Coast Ranges are vulnerable to sediment filling, thus creating obsolete impounding dams (Minear & Kondolf 2009). Once full of sediment, there is more impetus to remove dams for public safety and fish passage, but managing accumulated sediments becomes a dominant issue in dam removal planning. We analyzed the planning process and sediment management analyses for five dams, all of which have important ecological resources but whose dam removal options are constrained by potential impacts to downstream urban populations. Ringe Dam on Malibu Ck, Matilija Dam on the Ventura River, Searsville Dam on San Francisquito Ck, and Upper York Creek Dam on York Ck cut off important habitat for anadromous steelhead trout (Oncorhynchus mykiss). San Clemente Dam on the Carmel River has a working fish ladder, but only some of the migratory steelhead use it. By virtue of having filled with sediment, all five dams are at greater risk of seismic failure. San Clemente Dam is at greater risk because its foundation is on alluvium (not bedrock), and the poor-quality concrete in Matilija Dam is deteriorating from an akali-aggregate reaction. Simply removing the dams and allowing accumulated sediments to be transported downstream is not an option because all these rivers have extremely expensive houses along downstream banks and floodplains, so that allowing the downstream channel to aggrade with dam-dervied sediments could expose agencies to liability for future flood losses. Analyses of potential sediment transport have been based mostly on application of tractive force models, and have supported management responses ranging from in-situ stabilization (San Clemente and Matilija) to removal of stored sediment (York) to annual dredging to maintain capacity and prevent sediment passing over the dam (proposed for Searsville).

  11. Valence bond and von Neumann entanglement entropy in Heisenberg ladders.

    PubMed

    Kallin, Ann B; González, Iván; Hastings, Matthew B; Melko, Roger G

    2009-09-11

    We present a direct comparison of the recently proposed valence bond entanglement entropy and the von Neumann entanglement entropy on spin-1/2 Heisenberg systems using quantum Monte Carlo and density-matrix renormalization group simulations. For one-dimensional chains we show that the valence bond entropy can be either less or greater than the von Neumann entropy; hence, it cannot provide a bound on the latter. On ladder geometries, simulations with up to seven legs are sufficient to indicate that the von Neumann entropy in two dimensions obeys an area law, even though the valence bond entanglement entropy has a multiplicative logarithmic correction.

  12. Missile Facilities (WS-133B, WS-133A/M) Career Ladder, AFSCs 44530G, 44550G, and 44570G.

    DTIC Science & Technology

    1981-05-01

    or more C1C)(,L)CT V )(,- 17. To vhat base are you assigned? Choose only one response. 1. Ellsworth AFB (Wing 2)E l -2. F. E. Warren AFB (Wing 5) 3...AD-A117 454 AIR FORC.E OCCUPATIONAL MEASUREMENT CENTER RANDOLPH AFB TX F/A 5/9MISILE FACILITIES MWS 1338. VS 133A/M) CAREER LADDER, AFSCS 44--ETCr~gn...OCCUPATIONAL MEASUREMENT CENTER S.,RANDOLPH AFB , TEXAS 78148 I_--- 82 07 06 255 PRIVACY ACT STATEMENT I c~c~c~ AUTHORITY: 5 Usc Sec 301, E09397, and AER 35-2

  13. A High Efficiency, Miniaturized Ka Band Traveling Wave Tube Based on a Novel Finned Ladder RF Circuit Design

    NASA Technical Reports Server (NTRS)

    Wintucky, E. G.; Wilson, J. D.; Vaden, K. R.; Force, D. A.; Freeman, J. C.; Lesny, G. G.; Kory, C. L.; Chevalier, C. T.; Ebihara, B.; Dayton, J. A.; hide

    2001-01-01

    Space communications architectures are being planned to meet the high rate data distribution requirements of future NASA Enterprise missions. These will require the use of traveling wave tube amplifiers (TWTAs) to provide the high frequency, RF (radio frequency) power and efficiency needed for many of the communications links. A program addressing these requirements is currently underway at NASA Glenn Research Center (GRC) for the development of a high efficiency, 20 watt, 32 GHz TWT of reduced size and weight that is based on a novel high gain n circuit design, termed the 'finned ladder'.

  14. Quasi-one-dimensional Bose-Einstein condensation in the spin-1/2 ferromagnetic-leg ladder 3-I-V

    NASA Astrophysics Data System (ADS)

    Kono, Y.; Kittaka, S.; Yamaguchi, H.; Hosokoshi, Y.; Sakakibara, T.

    2018-03-01

    Quantum criticality of the spin-1/2 ferromagnetic-leg ladder 3-I-V [=3-(3-iodophenyl)-1,5-diphenylverdazyl] has been examined with respect to the antiferromagnetic to paramagnetic phase transition near the saturation field Hc. The phase boundary Tc(H ) follows the power-law Tc(H ) ∝Hc-H for a wide temperature range. This characteristic behavior is discussed as a quasi-one-dimensional (quasi-1D) Bose-Einstein condensation, which is predicted theoretically for weakly coupled quasi-1D ferromagnets. Thus, 3-I-V provides the first promising candidate for this attractive prediction.

  15. Optimal temperature ladders in replica exchange simulations

    NASA Astrophysics Data System (ADS)

    Denschlag, Robert; Lingenheil, Martin; Tavan, Paul

    2009-04-01

    In replica exchange simulations, a temperature ladder with N rungs spans a given temperature interval. Considering systems with heat capacities independent of the temperature, here we address the question of how large N should be chosen for an optimally fast diffusion of the replicas through the temperature space. Using a simple example we show that choosing average acceptance probabilities of about 45% and computing N accordingly maximizes the round trip rates r across the given temperature range. This result differs from previous analyses which suggested smaller average acceptance probabilities of about 23%. We show that the latter choice maximizes the ratio r/N instead of r.

  16. Single-photon superradiant beating from a Doppler-broadened ladder-type atomic ensemble

    NASA Astrophysics Data System (ADS)

    Lee, Yoon-Seok; Lee, Sang Min; Kim, Heonoh; Moon, Han Seb

    2017-12-01

    We report on heralded-single-photon superradiant beating in the spontaneous four-wave mixing process of Doppler-broadened ladder-type 87Rb atoms. When Doppler-broadened atoms contribute to two-photon coherence, the detection probability amplitudes of the heralded single photons are coherently superposed despite inhomogeneous broadened atomic media. Single-photon superradiant beating is observed, which constitutes evidence for the coherent superposition of two-photon amplitudes from different velocity classes in the Doppler-broadened atomic ensemble. We present a theoretical model in which the single-photon superradiant beating originates from the interference between wavelength-separated two-photon amplitudes via the reabsorption filtering effect.

  17. Spin waves and magnetic exchange interactions in the spin-ladder compound RbFe 2 Se 3

    DOE PAGES

    Wang, Meng; Yi, Ming; Jin, Shangjian; ...

    2016-07-20

    In this paper, we report an inelastic neutron scattering study of the spin waves of the one-dimensional antiferromagnetic spin ladder compound RbFe 2Se 3. The results reveal that the products, SJ's, of the spin S and the magnetic exchange interaction J along the antiferromagnetic (leg) direction and the ferromagnetic (rung) direction are comparable with those for the stripe ordered phase of the parent compounds of the iron-based superconductors. Also, the universality of the SJ's implies nearly universal spin wave dynamics and the irrelevance of the fermiology for the existence of the stripe antiferromagnetic order among various Fe-based materials.

  18. Two unprecedented aromatic guanidines supramolecular chains self-assembled by hydrogen bonding interaction

    NASA Astrophysics Data System (ADS)

    Zhang, Yunshen; Huang, Yichao; Zhang, Jiangwei; Zhu, Li; Chen, Kun; Hao, Jian

    2015-10-01

    Two aromatic guanidine derivatives, C6H5N = C(NHCy)2 (1), (n-TBA)C6H5NHC(NHCy)2Mo2O7 (2) (Cy = cyclohexyl), were synthetized with high yields. Both of them self-assembled into supramolecules via H-bond interactions. Single crystal XRD indicated that crystal 1 showed helix chains combining pseudo four-fold and pseudo six-fold symmetries, while crystal 2 presented ladder chains with alternate ring structures. In this paper, a novel way to design ladder-like supramolecular chains from helix chains was presented, using POMs (polyoxometalates) to provide protons to help assembly.

  19. Brevisulcatic acids, marine ladder-frame polyethers from the red tide dinoflagellate Karenia brevisulcata in New Zealand.

    PubMed

    Suzuki, Rina; Irie, Raku; Harntaweesup, Yanit; Tachibana, Kazuo; Holland, Patrick T; Harwood, D Tim; Shi, Feng; Beuzenberg, Veronica; Itoh, Yoshiyuki; Pascal, Steven; Edwards, Patrick J B; Satake, Masayuki

    2014-11-21

    The isolation and structural determination of new marine ladder-frame polyethers, brevisulcatic acids-1 (1) and -4 (2) are reported. Brevisulcatic acids were isolated from the dinoflagellate Karenia brevisulcata, which was identified as the causative species of a major red tide event in New Zealand in 1998. The ether ring composition and a β-hydroxy, γ-methylene valeric acid side chain of 1 and 2 are common, but 2 has a γ-lactone as the 5-membered A-ring while 1 is the seco acid analogue. Compound 2 has structural and bioactivity similarities to brevetoxin A.

  20. Study of CP(N-1) theta-vacua by cluster simulation of SU(N) quantum spin ladders.

    PubMed

    Beard, B B; Pepe, M; Riederer, S; Wiese, U-J

    2005-01-14

    D-theory provides an alternative lattice regularization of the 2D CP(N-1) quantum field theory in which continuous classical fields emerge from the dimensional reduction of discrete SU(N) quantum spins. Spin ladders consisting of n transversely coupled spin chains lead to a CP(N-1) model with a vacuum angle theta=npi. In D-theory no sign problem arises and an efficient cluster algorithm is used to investigate theta-vacuum effects. At theta=pi there is a first order phase transition with spontaneous breaking of charge conjugation symmetry for CP(N-1) models with N>2.

  1. "The black and white of it": Barbara Grier editing and publishing women of color.

    PubMed

    Enszer, Julie R

    2014-01-01

    In the 1970s and 1980s, lesbian-feminist writing and publishing expressed new theoretical insights about race and envisioned new, intersectional identities. Using texts published and edited by Grier in The Ladder and subsequent Ladder anthologies published by Diana Press, archival documents from Diana Press, and the Grier-Naiad Press papers, this article explores Grier's editorial practices and compares Grier's work to other lesbian-feminist editors and publishers to illuminate different generational understandings of racial-ethnic and class formations within lesbianism and feminism and highlight some of the strategies that White publishers like Grier utilized to realize a vision of multicultural publishing.

  2. Generalized Heisenberg Algebras, SUSYQM and Degeneracies: Infinite Well and Morse Potential

    NASA Astrophysics Data System (ADS)

    Hussin, Véronique; Marquette, Ian

    2011-03-01

    We consider classical and quantum one and two-dimensional systems with ladder operators that satisfy generalized Heisenberg algebras. In the classical case, this construction is related to the existence of closed trajectories. In particular, we apply these results to the infinite well and Morse potentials. We discuss how the degeneracies of the permutation symmetry of quantum two-dimensional systems can be explained using products of ladder operators. These products satisfy interesting commutation relations. The two-dimensional Morse quantum system is also related to a generalized two-dimensional Morse supersymmetric model. Arithmetical or accidental degeneracies of such system are shown to be associated to additional supersymmetry.

  3. Tunable separations based on a molecular size effect for biomolecules by poly(ethylene glycol) gel-based capillary electrophoresis.

    PubMed

    Kubo, Takuya; Nishimura, Naoki; Furuta, Hayato; Kubota, Kei; Naito, Toyohiro; Otsuka, Koji

    2017-11-10

    We report novel capillary gel electrophoresis (CGE) with poly(ethylene glycol) (PEG)-based hydrogels for the effective separations of biomolecules containing sugars and DNAs based on a molecular size effect. The gel capillaries were prepared in a fused silica capillary modified with 3-(trimethoxysilyl)propylmethacrylate using a variety of the PEG-based hydrogels. After the fundamental evaluations in CGE regarding the separation based on the molecular size effect depending on the crosslinking density, the optimized capillary provided the efficient separation of glucose ladder (G1 to G20). In addition, another capillary showed the successful separation of DNA ladder in the range of 10-1100 base pair, which is superior to an authentic acrylamide-based gel capillary. For both glucose and DNA ladders, the separation ranges against the molecular size were simply controllable by alteration of the concentration and/or units of ethylene oxide in the PEG-based crosslinker. Finally, we demonstrated the separations of real samples, which included sugars carved out from monoclonal antibodies, mAbs, and then the efficient separations based on the molecular size effect were achieved. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Polarization effects in the interaction between multi-level atoms and two optical fields

    NASA Astrophysics Data System (ADS)

    Colín-Rodríguez, R.; Flores-Mijangos, J.; Hernández-Gómez, S.; Jáuregui, R.; López-Hernández, O.; Mojica-Casique, C.; Ponciano-Ojeda, F.; Ramírez-Martínez, F.; Sahagún, D.; Volke-Sepúlveda, K.; Jiménez-Mier, J.

    2015-06-01

    Polarized velocity selective spectra for rubidium atoms in a room temperature cell are presented. The experiments were performed in the lambda configuration (D2 manifold) and in the 5s\\to 5{{p}3/2}\\to 5{{d}j} ladder configuration. For the lambda configuration the effect of the probe beam intensity in the absorption and polarization spectra are compared with results of a rate equation approximation. Good overall agreement between experiment and theory is found. The results indicate different saturation rates for each of the atomic transitions. Distinctive polarization signals with hyperfine-resolved components are found for the ladder 5{{d}3/2} and 5{{d}5/2} upper states. Fluorescence detection of the 420 nm that results from the second step in the cascade decay 5{{d}j}\\to 6{{p}{{j\\prime }}}\\to 5s was used in the ladder experiments. This fluorescence was also used for the detection of the 5{{p}3/2}\\to 6{{p}3/2} electric dipole forbidden transition in atomic rubidium that occurs at 911 nm. The 6{{p}3/2} hyperfine structure was resolved in this continuous wave, non-dipole excitation.

  5. Task parameters affecting ergonomic demands and productivity of HVAC duct installation.

    PubMed

    Mitropoulos, Panagiotis; Hussain, Sanaa; Guarascio-Howard, Linda; Memarian, Babak

    2014-01-01

    Mechanical installation workers experience work-related musculoskeletal disorders (WMSDs) at high rates. (1) Quantify the ergonomic demands during HVAC installation, (2) identify the tasks and task parameters that generated extreme ergonomic demands, and (3) propose improvements to reduce the WMSDs among mechanical workers. The study focused on installation of rectangular ductwork components using ladders, and analyzed five operations by two mechanical contractors. Using continuous time observational assessment, the videotaped operations were analyzed along two dimensions: (1) the production tasks and durations, and (2) the ergonomic demands for four body regions (neck, arms/shoulders, back, and knees). The analysis identified tasks with low portion of productive time and high portion of extreme postures, and task parameters that generated extreme postures. Duct alignment was the task with the highest portion of extreme postures. The position of the ladder (angle and distance from the duct) was a task parameter that strongly influenced the extreme postures for back, neck and shoulders. Other contributing factors included the difficulty to reach the hand tools when working on the ladder, the congestion of components in the ceiling, and the space between the duct and the ceiling. The identified tasks and factors provide directions for improvement.

  6. Development and validation of a nursing professionalism evaluation model in a career ladder system.

    PubMed

    Kim, Yeon Hee; Jung, Young Sun; Min, Ja; Song, Eun Young; Ok, Jung Hui; Lim, Changwon; Kim, Kyunghee; Kim, Ji-Su

    2017-01-01

    The clinical ladder system categorizes the degree of nursing professionalism and rewards and is an important human resource tool for managing nursing. We developed a model to evaluate nursing professionalism, which determines the clinical ladder system levels, and verified its validity. Data were collected using a clinical competence tool developed in this study, and existing methods such as the nursing professionalism evaluation tool, peer reviews, and face-to-face interviews to evaluate promotions and verify the presented content in a medical institution. Reliability and convergent and discriminant validity of the clinical competence evaluation tool were verified using SmartPLS software. The validity of the model for evaluating overall nursing professionalism was also analyzed. Clinical competence was determined by five dimensions of nursing practice: scientific, technical, ethical, aesthetic, and existential. The structural model explained 66% of the variance. Clinical competence scales, peer reviews, and face-to-face interviews directly determined nursing professionalism levels. The evaluation system can be used for evaluating nurses' professionalism in actual medical institutions from a nursing practice perspective. A conceptual framework for establishing a human resources management system for nurses and a tool for evaluating nursing professionalism at medical institutions is provided.

  7. Generation of non-classical correlated photon pairs via a ladder-type atomic configuration: theory and experiment.

    PubMed

    Ding, Dong-Sheng; Zhou, Zhi-Yuan; Shi, Bao-Sen; Zou, Xu-Bo; Guo, Guang-Can

    2012-05-07

    We experimentally generate a non-classical correlated two-color photon pair at 780 and 1529.4 nm in a ladder-type configuration using a hot 85Rb atomic vapor with the production rate of ~10(7)/s. The non-classical correlation between these two photons is demonstrated by strong violation of Cauchy-Schwarz inequality by the factor R = 48 ± 12. Besides, we experimentally investigate the relations between the correlation and some important experimental parameters such as the single-photon detuning, the powers of pumps. We also make a theoretical analysis in detail and the theoretical predictions are in reasonable agreement with our experimental results.

  8. Chiral symmetry restoration at finite temperature and chemical potential in the improved ladder approximation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Taniguchi, Y.; Yoshida, Y.

    1997-02-01

    The chiral symmetry of QCD is studied at finite temperature and chemical potential using the Schwinger-Dyson equation in the improved ladder approximation. We calculate three order parameters: the vacuum expectation value of the quark bilinear operator, the pion decay constant, and the quark mass gap. We have a second order phase transition at the temperature T{sub c}=169 MeV along the zero chemical potential line, and a first order phase transition at the chemical potential {mu}{sub c}=598 MeV along the zero temperature line. We also calculate the critical exponents of the three order parameters. {copyright} {ital 1997} {ital The American Physicalmore » Society}« less

  9. Interplay between spin frustration and magnetism in the exactly solved two-leg mixed spin ladder

    NASA Astrophysics Data System (ADS)

    Qi, Yan; Lv, Song-Wei; Du, An; Yu, Nai-sen

    2016-11-01

    We study a mixed spin-(3/2, 1) ladder system with antiferromagnetic rung coupling and next-nearest-neighbor interaction. The exactly solved Ising-chain model is employed to investigate the ground-state properties and thermodynamics of the low-dimensional ladder system. Our results show that the competition between different exchange couplings brings in a large variety of ground states characterized by various values of normalized magnetization equal to 0, 1/5, 2/5, 3/5, 1. Moreover, an interesting double-peak structure is also detected in the thermal dependence of magnetic susceptibility and specific heat when the frustration comes into play. It is shown that the double-peak phenomenon at zero-field for the case of AF2 ground-state arises from the very strong antiferromagnetic rung coupling, while other cases are attributed to the excitations induced by temperature and external field around the phase boundary. Project supported by the National Natural Science Foundation of China (Grant No. 11547236), the General Project of the Education Department of Liaoning Province, China (Grant No. L2015130), the Fundamental Research Funds for the Central Universities, China (Grant Nos. DC201501065 and DCPY2016014), and the Doctoral Starting-up Foundation of Dalian Nationalities University, China.

  10. An Intrinsically Switchable Ladder-Type Ferroelectric BST-on-Si Composite FBAR Filter.

    PubMed

    Lee, Seungku; Mortazawi, Amir

    2016-03-01

    This paper presents a ladder-type bulk acoustic wave (BAW) intrinsically switchable filter based on ferroelectric thin-film bulk acoustic resonators (FBARs). The switchable filter can be turned on and off by the application of an external bias voltage due to the electrostrictive effect in thin-film ferroelectrics. In this paper, Barium Strontium Titanate (BST) is used as the ferroelectric material. A systematic design approach for switchable ladder-type ferroelectric filters is provided based on required filter specifications. A switchable filter is implemented in the form of a BST-on-Si composite structure to control the effective electromechanical coupling coefficient of FBARs. As an experimental verification, a 2.5-stage intrinsically switchable BST-on-Si composite FBAR filter is designed, fabricated, and measured. Measurement results for a typical BST-on-Si composite FBAR show a resonator mechanical quality factor (Q(m)) of 971, as well as a (Q(m)) × f of 2423 GHz. The filter presented here provides a measured insertion loss of 7.8 dB, out-of-band rejection of 26 dB, and fractional bandwidth of 0.33% at 2.5827 GHz when the filter is in the on state at a dc bias of 40 V. In its off state, the filter exhibits an isolation of 31 dB.

  11. Production and Electrical Characterization Tests of the ISL Detector and a Trigger Design for Higgs Boson Searches at CDF

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Munar Ara, Antoni

    2002-01-01

    This thesis is structured as follows: Chapter 1. gives a brief review of the Higgs mechanism in the Standard Model and the electroweak symmetry breaking. The Standard Model Higgs boson phenomenology at Tevatron energies is reviewed. Chapter 2. describes the upgraded Fermilab laboratory accelerator complex, and the upgraded CDF detector. Chapter 3. gives a brief overview of the more relevant aspects of the silicon detectors, and the ISL is described in detail. Chapter 4. describes the construction of the ISL ladders, the full custom testing setup (functionality tests, laser test, burn-in test andmore » $$\\beta$$-source measurements), and the problems encountered during the ISL ladders construction. The procedures for ladder grading are also discussed. Chapter 5. describes the multilevel trigger system of the CDF detector, and the trigger primitives available at each level. The most relevant offine event observables are briefly discussed. In Chapter 6 the procedures to estimate the trigger rate and trigger effciency calculation are described. The particularities of triggering in $$p\\bar{p}$$ collisions at high luminosities are discussed. Chapter 7. and Chapter 8. are dedicated to study an effcient trigger strategy for the $$H + W/Z \\to b\\bar{b}jj$$ channel and the $$H + Z \\to b\\bar{b} \

  12. Electromagnetically induced transparency and Autler-Townes splitting in superconducting flux quantum circuits

    NASA Astrophysics Data System (ADS)

    Sun, Hui-Chen; Liu, Yu-xi; Ian, Hou; You, J. Q.; Il'ichev, E.; Nori, Franco

    2014-06-01

    We study the microwave absorption of a driven three-level quantum system, which is realized by a superconducting flux quantum circuit (SFQC), with a magnetic driving field applied to the two upper levels. The interaction between the three-level system and its environment is studied within the Born-Markov approximation, and we take into account the effects of the driving field on the damping rates of the three-level system. We study the linear response of the driven three-level SFQC to a weak probe field. The linear magnetic susceptibility of the SFQC can be changed by both the driving field and the bias magnetic flux. When the bias magnetic flux is at the optimal point, the transition from the ground state to the second-excited state is forbidden and the three-level SFQC has a ladder-type transition. Thus, the SFQC responds to the probe field like natural atoms with ladder-type transitions. However, when the bias magnetic flux deviates from the optimal point, the three-level SFQC has a cyclic transition, thus it responds to the probe field like a combination of natural atoms with ladder-type transitions and natural atoms with Λ-type transitions. In particular, we provide detailed discussions on the conditions for realizing electromagnetically induced transparency and Autler-Townes splitting in three-level SFQCs.

  13. SUSY’s Ladder: Reframing sequestering at Large Volume

    DOE PAGES

    Reece, Matthew; Xue, Wei

    2016-04-07

    Theories with approximate no-scale structure, such as the Large Volume Scenario, have a distinctive hierarchy of multiple mass scales in between TeV gaugino masses and the Planck scale, which we call SUSY's Ladder. This is a particular realization of Split Supersymmetry in which the same small parameter suppresses gaugino masses relative to scalar soft masses, scalar soft masses relative to the gravitino mass, and the UV cutoff or string scale relative to the Planck scale. This scenario has many phenomenologically interesting properties, and can avoid dangers including the gravitino problem, flavor problems, and the moduli-induced LSP problem that plague othermore » supersymmetric theories. We study SUSY's Ladder using a superspace formalism that makes the mysterious cancelations in previous computations manifest. This opens the possibility of a consistent effective field theory understanding of the phenomenology of these scenarios, based on power-counting in the small ratio of string to Planck scales. We also show that four-dimensional theories with approximate no-scale structure enforced by a single volume modulus arise only from two special higher-dimensional theories: five-dimensional supergravity and ten-dimensional type IIB supergravity. As a result, this gives a phenomenological argument in favor of ten dimensional ultraviolet physics which is different from standard arguments based on the consistency of superstring theory.« less

  14. Attitude symbology issues for helmet-mounted displays

    NASA Astrophysics Data System (ADS)

    Davy, Eleanor C.; Dudfield, Helen J.; Hardiman, Thomas D.; Doyle, Anthony J. R.

    1996-06-01

    One of the major advantages of HMDs is the display of information wherever the pilot is looking. These displays, however, raise important human factor issues for the optimal method of presenting attitude information. For example, problems may occur when the pilot looks off- boresight and is provided with information that is based upon the forward view of the aircraft (i.e. aircraft-referenced) and is thus incongruent. An experiment was conducted to examine this issue in which a traditional pitch ladder format was compared against the novel 'cylinder' format in an off-boresight attitude control task on a simulated HMD. This task involved recovery from unusual positions (UPs) which were presented at various off-boresight angles. Subjects' initial response times were faster for the pitch ladder format than for the two formats for total recovery times, error rates, height deviations, situational awareness rating technique or the questionnaire data. It was concluded that the performance on the cylinder format may be explained by the subjects' past experience using the pitch ladder or by the lack of information available when the aircraft was slightly nose-up or nose-down. It was suggested that improvements should be made to the cylinder if it is to be further examined in future research. Finally, the implications of this research for future work are discussed.

  15. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gadella, M.; Negro, J.; Santander, M.

    In this paper, we construct a Spectrum Generating Algebra (SGA) for a quantum system with purely continuous spectrum: the quantum free particle in a Lobachevski space with constant negative curvature. The SGA contains the geometrical symmetry algebra of the system plus a subalgebra of operators that give the spectrum of the system and connects the eigenfunctions of the Hamiltonian among themselves. In our case, the geometrical symmetry algebra is so(3,1) and the SGA is so(4,2). We start with a representation of so(4,2) by functions on a realization of the Lobachevski space given by a two-sheeted hyperboloid, where the Lie algebramore » commutators are the usual Poisson-Dirac brackets. Then, we introduce a quantized version of the representation in which functions are replaced by operators on a Hilbert space and Poisson-Dirac brackets by commutators. Eigenfunctions of the Hamiltonian are given and 'naive' ladder operators are identified. The previously defined 'naive' ladder operators shift the eigenvalues by a complex number so that an alternative approach is necessary. This is obtained by a non-self-adjoint function of a linear combination of the ladder operators, which gives the correct relation among the eigenfunctions of the Hamiltonian. We give an eigenfunction expansion of functions over the upper sheet of a two-sheeted hyperboloid in terms of the eigenfunctions of the Hamiltonian.« less

  16. Kelt Reconditioning: A Research Project to Enhance Iteroparity in Columbia Basin Steelhead (Oncorhynchus mykiss), 2003 Annual Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hatch, Douglas R.; Branstetter, Ryan; Blodgett, Joe

    Repeat spawning is a life history strategy that is expressed by some species from the family Salmonidae. Rates of repeat spawning for post-development Columbia River steelhead Oncorhynchus mykiss populations range from 1.6 to 17%. It is expected that currently observed iteroparity rates for wild steelhead in the Basin are severely depressed due to development and operation of the hydropower system and various additional anthropogenic factors. Increasing the natural expression of historical repeat spawning rates using fish culturing methods could be a viable technique to assist the recovery of depressed steelhead populations. Reconditioning is the process of culturing post-spawned fish (kelts)more » in a captive environment until they are able to reinitiate feeding, growth, and redevelop mature gonads. Kelt reconditioning techniques were initially developed for Atlantic salmon Salmo salar and sea-trout S. trutta. The recent Endangered Species Act listing of many Columbia Basin steelhead populations has prompted interest in developing reconditioning methods for wild steelhead populations within the Basin. To test kelt steelhead reconditioning as a potential recovery tool, we captured wild emigrating steelhead kelts from the Yakima River and evaluated reconditioning (short and long-term) success and diet formulations at Prosser Hatchery on the Yakima River. Steelhead kelts from the Yakima River were collected at the Chandler Juvenile Monitoring Facility (CJMF, located on the Yakima River at river kilometer 75.6) from 12 March to 28 May 2003. In total, 690 kelts were collected for reconditioning at Prosser Hatchery. Captive specimens represented 30.8% (690 of 2,235) of the entire 2002-2003 Yakima River wild steelhead population, based on fish ladder counts at Prosser Dam. All steelhead kelts were reconditioned in circular tanks, fed freeze-dried krill and received hw-wiegandt multi vit dietary supplement; long-term steelhead kelts also received Moore-Clark pellets. Oxytetracycline was administered to reconditioned fish to boost immune system response following the stress of initial capture. Formalin was also administered to prevent outbreaks of fungus and we also intubated the fish that were collected with Ivermectin{trademark} to control internal parasites (e.g., Salmincola spp.). Captured kelts were separated into two experimental groups: short-term and long-term reconditioning. Success indicators for the short-term experiment include the proportion of fish that survived the reconditioning process and the proportion of fish that initiated a feeding response. Short-term kelts were reconditioned for 3 to 7 weeks. Surviving specimens were released for natural spawning on June 4, 2003. Survival-to-release was very good for the short-term experiment, with a rate of 89.9%. Long-term steelhead kelts were held for 5-9 months then released on December 8, 2003. Long-term success indicators include the proportion of fish that survived the reconditioning process and the proportion of surviving fish that successfully remature. Survival and rematuration for long-term kelts increased as well with 62.4% surviving to release and 91.7% rematuring. A total of 47 reconditioned kelts were radio tagged to assess their spawning migration behavior and success following release from Prosser Hatchery and to evaluate in-season homing fidelity. As in previous years, the kelts reconditioned during this project will substantially bolster the number of repeat spawners in the Yakima River. Valuable knowledge regarding kelt husbandry, condition, and rearing environments were obtained during this research endeavor. The authors were very pleased with the high survival rates. Information collected during this feasibility study has been significantly incorporated into the experimental design for upcoming years of research, and is expected to continue to increase survival of long-term reconditioned fish and successful expression of iteroparity.« less

  17. Multi-material size optimization of a ladder frame chassis

    NASA Astrophysics Data System (ADS)

    Baker, Michael

    The Corporate Average Fuel Economy (CAFE) is an American fuel standard that sets regulations on fuel economy in vehicles. This law ultimately shapes the development and design research for automakers. Reducing the weight of conventional cars offers a way to improve fuel efficiency. This research investigated the optimality of an automobile's ladder frame chassis (LFC) by conducting multi-objective optimization on the LFC in order to reduce the weight of the chassis. The focus of the design and optimization was a ladder frame chassis commonly used for mass production light motor vehicles with an open-top rear cargo area. This thesis is comprised of two major sections. The first looked to perform thickness optimization in the outer walls of the ladder frame. In the second section, many multi-material distributions, including steel and aluminium varieties, were investigated. A simplified model was used to do an initial hand calculation analysis of the problem. This was used to create a baseline validation to compare the theory with the modeling. A CAD model of the LFC was designed. From the CAD model, a finite element model was extracted and joined using weld and bolt connectors. Following this, a linear static analysis was performed to look at displacement and stresses when subjected to loading conditions that simulate harsh driving conditions. The analysis showed significant values of stress and displacement on the ends of the rails, suggesting improvements could be made elsewhere. An optimization scheme was used to find the values of an all steel frame an optimal thickness distribution was found. This provided a 13% weight reduction over the initial model. To advance the analysis a multi-material approach was used to push the weight savings even further. Several material distributions were analyzed and the lightest utilized aluminium in all but the most strenuous subjected components. This enabled a reduction in weight of 15% over the initial model, equivalent to approximately 1 mile per gallon (MPG) in fuel economy.

  18. Nonlinear response from transport theory and quantum field theory at finite temperature

    NASA Astrophysics Data System (ADS)

    Carrington, M. E.; Defu, Hou; Kobes, R.

    2001-07-01

    We study the nonlinear response in weakly coupled hot φ4 theory. We obtain an expression for a quadratic shear viscous response coefficient using two different formalisms: transport theory and response theory. The transport theory calculation is done by assuming a local equilibrium form for the distribution function and expanding in the gradient of the local four dimensional velocity field. By performing a Chapman-Enskog expansion on the Boltzmann equation we obtain a hierarchy of equations for the coefficients of the expanded distribution function. To do the response theory calculation we use Zubarev's techniques in nonequilibrium statistical mechanics to derive a generalized Kubo formula. Using this formula allows us to obtain the quadratic shear viscous response from the three-point retarded Green function of the viscous shear stress tensor. We use the closed time path formalism of real time finite temperature field theory to show that this three-point function can be calculated by writing it as an integral equation involving a four-point vertex. This four-point vertex can in turn be obtained from an integral equation which represents the resummation of an infinite series of ladder and extended-ladder diagrams. The connection between transport theory and response theory is made when we show that the integral equation for this four-point vertex has exactly the same form as the equation obtained from the Boltzmann equation for the coefficient of the quadratic term of the gradient expansion of the distribution function. We conclude that calculating the quadratic shear viscous response using transport theory and keeping terms that are quadratic in the gradient of the velocity field in the Chapman-Enskog expansion of the Boltzmann equation is equivalent to calculating the quadratic shear viscous response from response theory using the next-to-linear response Kubo formula, with a vertex given by an infinite resummation of ladder and extended-ladder diagrams.

  19. Ladder Structures and Magnetic Surveys: New Insights into the Near Surface, Three-Dimensional Shape and Orientation of Plutonic Structures in the Tuolumne Intrusive Suite, Yosemite National Park, California

    NASA Astrophysics Data System (ADS)

    Boyd, J. D.

    2017-12-01

    The study of pluton emplacement and growth history offers a window into the evolution of the continental crust. Plutons, however, are often largely homogeneous in outcrop, lacking reliable structural markers for tracking their emplacement and growth through time. The ladder structures exposed on the glacially polished surfaces of the Tuolumne Intrusive Suite (TIS) in Yosemite National Park, California are an exception. Ladder structures (LS) are eye-catching concentrations of alternating mafic and felsic mineral assemblages in dominantly cresent-shaped, meter to sub-meter scale bands in outcrop that locally terminate into a mafic band forming a circular-shaped enclosure. Their geochemistry and modal mineralogy diverge sharply from host rock trends with large quantities of magnetite, titanite, and zircon in the mafic assemblages. The limited exposure of LS in outcrops has led to much debate as to their true geometries and orientations. The high concentration of magnetite in the LS is fortuitous in that it allows these features to be investigated by magnetic techniques. The preliminary results of new high resolution magnetic surveys of these LS are presented here. A grid of total magnetic intensity (TMI) was collected across the ladder structures. The TMI's were then inverted and modeled to determine the orientation of the magnetic bodies with depth using PyGMI freeware. With sufficient contrast in the magnetic susceptibility (Km) between the feature being imaged and the host rock, meter to sub-meter scale features can be resolved. The average Km of the LS mafic bands and the host rock is approximately 200-850 x10-3 and 15-20×10-3 SI units respectively. These measurements along with oriented samples were collected to determine input parameters (e.g. anisotropy and remanence) for the geocellular model used in this study.

  20. Structure of the conversion laws in quantum integrable spin chains with short range interactions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Grabowski, M.P.; Mathieu, P.

    1995-11-01

    The authors present a detailed analysis of the structure of the conservation laws in quantum integrable chains of the XYZ-type and in the Hubbard model. The essential tool for the former class of models is the boost operator, which provides a recursive way of calculating the integrals of motion. With its help, they establish the general form of the XYZ conserved charges in terms of simple polynomials in spin variables and derive recursion relations for the relative coefficients of these polynomials. Although these relations are difficult to solve in general, a subset of the coefficients can be determined. Moreover, formore » two submodels of the XYZ chain, namely the XXX and XY cases, all the charges can be calculated in closed form. Using this approach, the authors rederive the known expressions for the XY charges in a novel way. For the XXX case. a simple description of conserved charges is found in terms of a Catalan tree. This construction is generalized for the su(M) invariant integrable chain. They also investigate the circumstances permitting the existence of a recursive (ladder) operator in general quantum integrable systems. They indicate that a quantum ladder operator can be traced back to the presence of a Hamiltonian mastersymmetry of degree one in the classical continuous version of the model. In this way, quantum chains endowed with a recursive structure can be identified from the properties of their classical relatives. The authors also show that in the quantum continuous limits of the XYZ model, the ladder property of the boost operator disappears. For the Hubbard model they demonstrate the nonexistence of a ladder operator. Nevertheless, the general structure of the conserved charges is indicated, and the expression for the terms linear in the model`s free parameter for all charges is derived in closed form. 62 refs., 4 figs.« less

  1. Static holes in the geometrically frustrated bow-tie ladder

    NASA Astrophysics Data System (ADS)

    Martins, George B.; Brenig, Wolfram

    2008-10-01

    We investigate the doping of a geometrically frustrated spin ladder with static holes by a complementary approach using exact diagonalization and quantum dimers. Results for thermodynamic properties, the singlet density of states, the hole-binding energy and the spin correlations will be presented. For the undoped systems the ground state is non-degenerate, with translationally invariant nearest-neighbor spin correlations. For the doped case, we find that static holes polarize their vicinity through a localization of singlets, reducing the frustration. This polarization induces short range repulsive forces between two holes and an oscillatory behavior of the long range two-hole energy. For most quantities investigated, we find very good agreement between the quantum dimer approach and the results from exact diagonalization.

  2. Leadership behaviors of frontline staff nurses.

    PubMed

    Fardellone, Christine; Musil, Carol M; Smith, Elaine; Click, Elizabeth R

    2014-11-01

    A recommendation in the Institute of Medicine's report, The Future of Nursing: Leading Change, Advancing Health, challenges the nursing profession to enhance nursing's leadership role in health care redesign. This descriptive, correlational, cross-sectional study examined the self-perceived leadership behaviors of RNs enrolled in a clinical ladder career pathway. A self-report survey was conducted using the Leadership Practice Inventory and a demographic questionnaire. Significant associations between continuous and categorical demographic factors and ladder levels were reported. Nurses with more experience showed fewer leadership behaviors. Leadership development is necessary for nurses in all areas of practice. The findings from this study provide evidence of the strengths and weaknesses in leadership behaviors of staff clinical RNs who often make frontline decisions for patients. Copyright 2014, SLACK Incorporated.

  3. Tunable photonic band gaps and optical nonreciprocity by an RF-driving ladder-type system in moving optical lattice

    NASA Astrophysics Data System (ADS)

    Ba, Nuo; Zhong, Xin; Wang, Lei; Fei, Jin-You; Zhang, Yan; Bao, Qian-Qian; Xiao, Li

    2018-03-01

    We investigate photonic transport properties of the 1D moving optical lattices filled with vast cold atoms driven into a four-level ladder-type system and obtain dynamically controlled photonic bandgaps and optical nonreciprocity. It is found that the two obvious optical nonreciprocity can be generated at two well-developed photonic bandgaps based on double dark states in the presence of a radio-frequency field. However, when the radio-frequency field is absence, the only one induced photonic bandgaps with distinguishing optical nonreciprocity can be opened up via single dark state. Dynamic control of the induced photonic bandgaps and optical nonreciprocity could be exploited to achieve all-optical diodes and routing for quantum information networks.

  4. Carbon dioxide dissociation in non-thermal radiofrequency and microwave plasma

    NASA Astrophysics Data System (ADS)

    Huang, Qiang; Zhang, Diyu; Wang, Dongping; Liu, Kezhao; Kleyn, Aart W.

    2017-07-01

    We have studied carbon dioxide dissociation in inductively coupled radiofrequency plasma and microwave plasma at low gas pressure. Both systems exhibit features of non-thermal plasma. The highest energy efficiency observed is 59.3% (2.13 mmol kJ-1), exceeding the maximum value of about 45% in case of thermodynamic equilibrium, and a maximum conversion of 80.6% is achieved. Different discharge conditions, such as the source frequency, discharge gas pressure and the addition of argon, will affect the plasma parameters, especially the electron energy distribution. This plays a great role in the energy transfer from non-thermal plasma to the molecular dissociation reaction channel by enabling the ladder climbing of the carbon dioxide molecular vibration. The results indicate the importance of ladder climbing.

  5. Engineering of many-body Majorana states in a topological insulator/s-wave superconductor heterostructure.

    PubMed

    Hung, Hsiang-Hsuan; Wu, Jiansheng; Sun, Kuei; Chiu, Ching-Kai

    2017-06-14

    We study a vortex chain in a thin film of a topological insulator with proximity-induced superconductivity-a promising platform to realize Majorana zero modes (MZMs)-by modeling it as a two-leg Majorana ladder. While each pair of MZMs hybridizes through vortex tunneling, we hereby show that MZMs can be stabilized on the ends of the ladder with the presence of tilted external magnetic field and four-Majorana interaction. Furthermore, a fruitful phase diagram is obtained by controlling the direction of magnetic field and the thickness of the sample. We reveal many-body Majorana states and interaction-induced topological phase transitions and also identify trivial-superconducting and commensurate/incommensurate charge-density-wave states in the phase diagram.

  6. Epidemiological models to control the spread of information in marine mammals.

    PubMed

    Schakner, Zachary A; Buhnerkempe, Michael G; Tennis, Mathew J; Stansell, Robert J; van der Leeuw, Bjorn K; Lloyd-Smith, James O; Blumstein, Daniel T

    2016-12-14

    Socially transmitted wildlife behaviours that create human-wildlife conflict are an emerging problem for conservation efforts, but also provide a unique opportunity to apply principles of infectious disease control to wildlife management. As an example, California sea lions (Zalophus californianus) have learned to exploit concentrations of migratory adult salmonids below the fish ladders at Bonneville Dam, impeding endangered salmonid recovery. Proliferation of this foraging behaviour in the sea lion population has resulted in a controversial culling programme of individual sea lions at the dam, but the impact of such culling remains unclear. To evaluate the effectiveness of current and alternative culling strategies, we used network-based diffusion analysis on a long-term dataset to demonstrate that social transmission is implicated in the increase in dam-foraging behaviour and then studied different culling strategies within an epidemiological model of the behavioural transmission data. We show that current levels of lethal control have substantially reduced the rate of social transmission, but failed to effectively reduce overall sea lion recruitment. Earlier implementation of culling could have substantially reduced the extent of behavioural transmission and, ultimately, resulted in fewer animals being culled. Epidemiological analyses offer a promising tool to understand and control socially transmissible behaviours. © 2016 The Author(s).

  7. Lake Roosevelt Fisheries Evaluation Program : Limnological and Fisheries Monitoring Annual Report 1999.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McLellan, Holly; Lee, Chuck; Scofield, Ben

    1999-08-01

    The Grand Coulee Dam was constructed in 1939 without a fish ladder, which eliminated steelhead (Onchorhynchus mykiss), chinook salmon (O. twshwastica), coho salmon (O. kisutch) and sockeye salmon (O. nerka) from returning to approximately 1,835 km (1,140 miles) of natal streams and tributaries found in the upper Columbia River Drainage in the United States and Canada. The Pacific Northwest Electric Power Planning and Conservation Act of 1980 gave the Bonneville Power Administration (BPA), the authority and responsibility to use its legal and financial resources, 'to protect, mitigate, and enhance fish and wildlife to the extent affected by the development andmore » operation of any hydroelectric project of the Columbia River and its tributaries. This is to be done in a manner consistent with the program adopted by the Northwest Power Planning Council (NWPPC), and the purposes of the Act' (NWPPC, 1987). With the phrase 'protect, mitigate and enhance', Congress signaled its intent that the NWPPC's fish and wildlife program should do more than avoid future hydroelectric damage to the basin's fish and wildlife. The program must also counter past damage, work toward rebuilding those fish and wildlife populations that have been harmed by the hydropower system, protect the Columbia Basin's fish and wildlife resources, and mitigate for harm caused by decades of hydroelectric development and operations. By law, this program is limited to measures that deal with impacts created by the development, operation and management of hydroelectric facilities on the Columbia River and its tributaries. However, off-site enhancement projects are used to address the effects of the hydropower system on fish and wildlife (NWPPC 1987). Resident game fish populations have been established in Franklin D. Roosevelt Lake, the reservoir behind Grand Coulee Dam, since the extirpation of anadromous fish species. The resident game fish populations are now responsible for attracting a large percentage of the recreational visits to the region. An increase in popularity has placed Lake Roosevelt fifth amongst the most visited State and Federal parks in Washington. Increased use of the reservoir prompted amplified efforts to enhance the Native American subsistence fishery and the resident sport fishery in 1984 with hatchery supplementation of rainbow trout (O. mykiss) and kokanee salmon (O. nerka). This was followed by the formation of the Spokane Tribal Lake Roosevelt Monitoring Project (LRMP) in 1988 and later by formation of the Lake Roosevelt Data Collection Project in 1991. The Lake Roosevelt Data Collection Project began in July 1991 as part of the BPA, Bureau of Reclamation, and U.S. Army Corps of Engineers System Operation Review process. This process sought to develop an operational scenario for the federal Columbia River hydropower system to maximize the in-reservoir fisheries with minimal impacts to all other stakeholders in the management of the Columbia River. The Lake Roosevelt Monitoring/Data Collection Program (LRMP) is the result of a merger between the Lake Roosevelt Monitoring Program (BPA No. 8806300) and the Lake Roosevelt Data Collection Project (BPA No. 9404300). These projects were merged in 1996 forming the Lake Roosevelt Monitoring Program (LRMP), which continues the work historically completed under the separate projects. The LRMP has two main goals. The first is to develop a biological model for Lake Roosevelt that will predict in-reservoir biological responses to a range of water management operational scenarios, and to develop fisheries and reservoir management strategies accordingly. The model will allow identification of lake operations that minimize impacts on lake biota while addressing the needs of other interests (e.g. flood control, hydropower generation, irrigation, and downstream resident and anadromous fisheries). Major components of the model will include: (1) quantification of entrainment and other impacts to phytoplankton, zooplankton and fish caused by reservoir drawdowns and low water retention times; (2) quantification of seasonal distributions, standing crop, and habitat use of fish food organisms; (3) examination of variations in fish growth and abundance in relation to reservoir operations, prey abundance and predator/prey relationships; and (4) quantification of habitat alterations due to hydrooperations. The second goal of the LRMP is to evaluate the impacts of hatchery kokanee salmon and rainbow trout on the ecosystem and to determine stocking strategies that maximize angler harvest and return of adult kokanee salmon to egg collection facilities. Major tasks of the hatchery evaluation portion of the project include conducting a year round reservoir wide creel survey, sampling the fishery during spring, summer and fall via electro-fishing and gillnet surveys, and collecting information on diet, growth, and age composition of various fish species in Lake Roosevelt.« less

  8. Signatures of pairing in the magnetic excitation spectrum of strongly correlated two-leg ladders [Signatures of pairing in the magnetic excitation spectrum of strongly correlated ladders

    DOE PAGES

    Nocera, Alberto; Patel, Niravkumar D.; Dagotto, Elbio R.; ...

    2017-11-13

    Magnetic interactions are widely believed to play a crucial role in the microscopic mechanism leading to high critical temperature superconductivity. It is therefore important to study the signatures of pairing in the magnetic excitation spectrum of simple models known to show unconventional superconducting tendencies. Using the density matrix renormalization group technique, we calculate the dynamical spin structure factor S(k,ω) of a generalized t–U–J Hubbard model away from half filling in a two-leg ladder geometry. The addition of J enhances pairing tendencies. We analyze quantitatively the signatures of pairing in the magnetic excitation spectra. We found that the superconducting pair-correlation strength,more » that can be estimated independently from ground state properties, is closely correlated with the integrated low-energy magnetic spectral weight in the vicinity of (π,π). In this wave-vector region, robust spin incommensurate features develop with increasing doping. The branch of the spectrum with rung direction wave vector k rung=0 does not change substantially with doping where pairing dominates and thus plays a minor role. As a result, we discuss the implications of our results for neutron scattering experiments, where the spin excitation dynamics of hole-doped quasi-one-dimensional magnetic materials can be measured and also address implications for recent resonant inelastic x-ray scattering experiments.« less

  9. Signatures of pairing in the magnetic excitation spectrum of strongly correlated two-leg ladders [Signatures of pairing in the magnetic excitation spectrum of strongly correlated ladders

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nocera, Alberto; Patel, Niravkumar D.; Dagotto, Elbio R.

    Magnetic interactions are widely believed to play a crucial role in the microscopic mechanism leading to high critical temperature superconductivity. It is therefore important to study the signatures of pairing in the magnetic excitation spectrum of simple models known to show unconventional superconducting tendencies. Using the density matrix renormalization group technique, we calculate the dynamical spin structure factor S(k,ω) of a generalized t–U–J Hubbard model away from half filling in a two-leg ladder geometry. The addition of J enhances pairing tendencies. We analyze quantitatively the signatures of pairing in the magnetic excitation spectra. We found that the superconducting pair-correlation strength,more » that can be estimated independently from ground state properties, is closely correlated with the integrated low-energy magnetic spectral weight in the vicinity of (π,π). In this wave-vector region, robust spin incommensurate features develop with increasing doping. The branch of the spectrum with rung direction wave vector k rung=0 does not change substantially with doping where pairing dominates and thus plays a minor role. As a result, we discuss the implications of our results for neutron scattering experiments, where the spin excitation dynamics of hole-doped quasi-one-dimensional magnetic materials can be measured and also address implications for recent resonant inelastic x-ray scattering experiments.« less

  10. Towards Cohomology of Renormalization: Bigrading the Combinatorial Hopf Algebra of Rooted Trees

    NASA Astrophysics Data System (ADS)

    Broadhurst, D. J.; Kreimer, D.

    The renormalization of quantum field theory twists the antipode of a noncocommutative Hopf algebra of rooted trees, decorated by an infinite set of primitive divergences. The Hopf algebra of undecorated rooted trees, ℌR, generated by a single primitive divergence, solves a universal problem in Hochschild cohomology. It has two nontrivial closed Hopf subalgebras: the cocommutative subalgebra ℌladder of pure ladder diagrams and the Connes-Moscovici noncocommutative subalgebra ℌCM of noncommutative geometry. These three Hopf algebras admit a bigrading by n, the number of nodes, and an index k that specifies the degree of primitivity. In each case, we use iterations of the relevant coproduct to compute the dimensions of subspaces with modest values of n and k and infer a simple generating procedure for the remainder. The results for ℌladder are familiar from the theory of partitions, while those for ℌCM involve novel transforms of partitions. Most beautiful is the bigrading of ℌR, the largest of the three. Thanks to Sloane's superseeker, we discovered that it saturates all possible inequalities. We prove this by using the universal Hochschild-closed one-cocycle B+, which plugs one set of divergences into another, and by generalizing the concept of natural growth beyond that entailed by the Connes-Moscovici case. We emphasize the yet greater challenge of handling the infinite set of decorations of realistic quantum field theory.

  11. Control of Porosity in Ladder Polymers by Solvent-induced Aggregation

    NASA Astrophysics Data System (ADS)

    Brady, Michael; Gamo, Eri; Wang, Cheng; Xia, Yan

    Porous polymers hold promise as materials for gas absorption, membranes, and organic electronics. In all of these applications, attaining in-plane ordering of backbones and thus porous free volume impacts the ability to adsorb gas, selectively filter molecules, and conduct charges. In this work, hard and soft x-ray scattering and soft x-ray spectroscopy are of focus to study the pore structure, induced by the solution-driven aggregation of ladder polymer thin films made of LP-1 and LP-2. Using GISAXS and AFM it is shown that thermal annealing drives the growth of crystallites in thin films. Due to the completely sp2nature of the ladder polymer backbones, it is expected that backbones are extremely stiff and thus preventing them from packing once left in a metastable state following casting. Therefore, the combination of GIWAXS and GISAXS will be shown to be critical in correctly understanding how pores develop in this 700 m2/g sorbent (N2). Finally, application in CO2/N2 separation membranes towards carbon sequestration will be presented that show gas selectivity is achieved through heteroatom incorporation and polymer blending. In this talk, focus will be placed on state-of-the-art x-ray scattering and spectroscopy, highlighting the importance of chemically sensitive structural information enabled by the combination of spectroscopy and scattering at play with the use of resonant soft x-rays.

  12. A Dioxane Template for Highly Selective Epoxy Alcohol Cyclizations

    PubMed Central

    Mousseau, James J.; Morten, Christopher J.

    2013-01-01

    Ladder polyether natural products are a class of natural products denoted by their high functional group density and large number of well-defined stereocenters. They comprise the toxic component of harmful algal blooms (HABs), having significant negative economic and environmental ramifications. However, their mode of action, namely blocking various cellular ion channels, also denotes their promise as potential anticancer agents. Understanding their potential mode of biosynthesis will not only help with developing ways to limit the damage of HABs, but would also facilitate the synthesis of a range of analogues with interesting biological activity. 1,3-Dioxan-5-ol substrates display remarkable ‘enhanced template effects’ in water-promoted epoxide cyclization processes en route to the synthesis of these ladder polyether natural products. In many cases they provide near complete endo to exo selectivity in the cyclization of epoxy alcohols, thereby strongly favouring the formation of tetrahydropyran (THP) over tetrahydrofuran (THF) rings. The effects of various Brønsted and Lewis acidic and basic conditions are explored to demonstrate the superior selectivity of the template over the previously reported THP-based epoxy alcohols. In addition, the consideration of other synthetic routes are also considered with the goal of gaining rapid access to a plethora of potential starting materials applicable towards the synthesis of ladder polyethers. Finally, cascade sequences with polyepoxides are investigated, further demonstrating the versatility of this new reaction template. PMID:23775936

  13. Weak coupling of pseudoacoustic phonons and magnon dynamics in the incommensurate spin-ladder compound S r 14 C u 24 O 41

    DOE PAGES

    Chen, Xi; Bansal, Dipanshu; Sullivan, Sean; ...

    2016-10-21

    Intriguing lattice dynamics have been predicted for aperiodic crystals that contain incommensurate substructures. Here we report inelastic neutron scattering measurements of phonon and magnon dispersions in Sr 14Cu 24O 41, which contains incommensurate one-dimensional (1D) chain and two-dimensional (2D) ladder substructures. Two distinct pseudoacoustic phonon modes, corresponding to the sliding motion of one sublattice against the other, are observed for atomic motions polarized along the incommensurate axis. In the long wavelength limit, it is found that the sliding mode shows a remarkably small energy gap of 1.7–1.9 meV, indicating very weak interactions between the two incommensurate sublattices. The measurements alsomore » reveal a gapped and steep linear magnon dispersion of the ladder sublattice. The high group velocity of this magnon branch and weak coupling with acoustic and pseudoacoustic phonons can explain the large magnon thermal conductivity in Sr 14Cu 24O 41 crystals. In addition, the magnon specific heat is determined from the measured total specific heat and phonon density of states and exhibits a Schottky anomaly due to gapped magnon modes of the spin chains. Furthermore, these findings offer new insights into the phonon and magnon dynamics and thermal transport properties of incommensurate magnetic crystals that contain low-dimensional substructures.« less

  14. Nonlinear integrable model of Frenkel-like excitations on a ribbon of triangular lattice

    NASA Astrophysics Data System (ADS)

    Vakhnenko, Oleksiy O.

    2015-03-01

    Following the considerable progress in nanoribbon technology, we propose to model the nonlinear Frenkel-like excitations on a triangular-lattice ribbon by the integrable nonlinear ladder system with the background-controlled intersite resonant coupling. The system of interest arises as a proper reduction of first general semidiscrete integrable system from an infinite hierarchy. The most significant local conservation laws related to the first general integrable system are found explicitly in the framework of generalized recursive approach. The obtained general local densities are equally applicable to any general semidiscrete integrable system from the respective infinite hierarchy. Using the recovered second densities, the Hamiltonian formulation of integrable nonlinear ladder system with background-controlled intersite resonant coupling is presented. In doing so, the relevant Poisson structure turns out to be essentially nontrivial. The Darboux transformation scheme as applied to the first general semidiscrete system is developed and the key role of Bäcklund transformation in justification of its self-consistency is pointed out. The spectral properties of Darboux matrix allow to restore the whole Darboux matrix thus ensuring generation one more soliton as compared with a priori known seed solution of integrable nonlinear system. The power of Darboux-dressing method is explicitly demonstrated in generating the multicomponent one-soliton solution to the integrable nonlinear ladder system with background-controlled intersite resonant coupling.

  15. Role of Modular Polyketide Synthases in the Production of Polyether Ladder Compounds in Ciguatoxin-Producing Gambierdiscus polynesiensis and G. excentricus (Dinophyceae).

    PubMed

    Kohli, Gurjeet S; Campbell, Katrina; John, Uwe; Smith, Kirsty F; Fraga, Santiago; Rhodes, Lesley L; Murray, Shauna A

    2017-09-01

    Gambierdiscus, a benthic dinoflagellate, produces ciguatoxins that cause the human illness Ciguatera. Ciguatoxins are polyether ladder compounds that have a polyketide origin, indicating that polyketide synthases (PKS) are involved in their production. We sequenced transcriptomes of Gambierdiscus excentricus and Gambierdiscus polynesiensis and found 264 contigs encoding single domain ketoacyl synthases (KS; G. excentricus: 106, G. polynesiensis: 143) and ketoreductases (KR; G. excentricus: 7, G. polynesiensis: 8) with sequence similarity to type I PKSs, as reported in other dinoflagellates. In addition, 24 contigs (G. excentricus: 3, G. polynesiensis: 21) encoding multiple PKS domains (forming typical type I PKSs modules) were found. The proposed structure produced by one of these megasynthases resembles a partial carbon backbone of a polyether ladder compound. Seventeen contigs encoding single domain KS, KR, s-malonyltransacylase, dehydratase and enoyl reductase with sequence similarity to type II fatty acid synthases (FAS) in plants were found. Type I PKS and type II FAS genes were distinguished based on the arrangement of domains on the contigs and their sequence similarity and phylogenetic clustering with known PKS/FAS genes in other organisms. This differentiation of PKS and FAS pathways in Gambierdiscus is important, as it will facilitate approaches to investigating toxin biosynthesis pathways in dinoflagellates. © 2017 The Author(s) Journal of Eukaryotic Microbiology © 2017 International Society of Protistologists.

  16. Phase transitions and thermal entanglement of the distorted Ising-Heisenberg spin chain: topology of multiple-spin exchange interactions in spin ladders

    NASA Astrophysics Data System (ADS)

    Arian Zad, Hamid; Ananikian, Nerses

    2017-11-01

    We consider a symmetric spin-1/2 Ising-XXZ double sawtooth spin ladder obtained from distorting a spin chain, with the XXZ interaction between the interstitial Heisenberg dimers (which are connected to the spins based on the legs via an Ising-type interaction), the Ising coupling between nearest-neighbor spins of the legs and rungs spins, respectively, and additional cyclic four-spin exchange (ring exchange) in the square plaquette of each block. The presented analysis supplemented by results of the exact solution of the model with infinite periodic boundary implies a rich ground state phase diagram. As well as the quantum phase transitions, the characteristics of some of the thermodynamic parameters such as heat capacity, magnetization and magnetic susceptibility are investigated. We prove here that among the considered thermodynamic and thermal parameters, solely heat capacity is sensitive versus the changes of the cyclic four-spin exchange interaction. By using the heat capacity function, we obtain a singularity relation between the cyclic four-spin exchange interaction and the exchange coupling between pair spins on each rung of the spin ladder. All thermal and thermodynamic quantities under consideration should be investigated by regarding those points which satisfy the singularity relation. The thermal entanglement within the Heisenberg spin dimers is investigated by using the concurrence, which is calculated from a relevant reduced density operator in the thermodynamic limit.

  17. 46 CFR 197.320 - Diving ladder and stage.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. (b... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. ...

  18. 46 CFR 197.320 - Diving ladder and stage.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. (b... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. ...

  19. 46 CFR 197.320 - Diving ladder and stage.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. (b... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. ...

  20. 46 CFR 197.320 - Diving ladder and stage.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. (b... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. ...

  1. 46 CFR 197.320 - Diving ladder and stage.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. (b... corrosion-resistant material; or (ii) Protected against and maintained free from injurious corrosion. ...

  2. Drowning Prevention

    MedlinePlus

    ... on the back Appear to be climbing an invisible ladder For newborn infants and children through four ... Academy of Pediatrics) The information contained on this Web site should not be used as a substitute ...

  3. A covariant multiple scattering series for elastic projectile-target scattering

    NASA Technical Reports Server (NTRS)

    Gross, Franz; Maung-Maung, Khin

    1989-01-01

    A covariant formulation of the multiple scattering series for the optical potential is presented. The case of a scalar nucleon interacting with a spin zero isospin zero A-body target through meson exchange, is considered. It is shown that a covariant equation for the projectile-target t-matrix can be obtained which sums the ladder and crossed ladder diagrams efficiently. From this equation, a multiple scattering series for the optical potential is derived, and it is shown that in the impulse approximation, the two-body t-matrix associated with the first order optical potential is the one in which one particle is kept on mass-shell. The meaning of various terms in the multiple scattering series is given. The construction of the first-order optical potential for elastic scattering calculations is described.

  4. A Simulator for the Respiratory Tree in Healthy Subjects Derived from Continued Fractions Expansions

    NASA Astrophysics Data System (ADS)

    Muntean, Ionuţ; Ionescu, Clara; Naşcu, Ioan

    2009-04-01

    Taking into account the self-similar recurrent geometrical structure of the human respiratory tree, the total respiratory impedance can be represented using an electrical equivalent of a ladder network model. In this paper, the parameters of the respiratory tree are employed in simulation, based on clinical insight and morphology. Once the transfer function of the total input impedance model is calculated, it is further interpreted in its continued fraction expansion form. The purpose is to compare the ladder network structure with the continuous fraction expansion form of the impedance. The results are supporting the theory of fractional-order impedance appearance (also known as constant-phase behaviour) and help understanding the mathematical and morphological basis for constructing a physiology-based simulator of the human lungs.

  5. Power converter

    NASA Technical Reports Server (NTRS)

    Black, J. M. (Inventor)

    1981-01-01

    A dc-to-dc converter employs four transistor switches in a bridge to chop dc power from a source, and a voltage multiplying diode rectifying ladder network to rectify and filter the chopped dc power for delivery to a load. The bridge switches are cross coupled in order for diagonally opposite pairs to turn on and off together using RC networks for the cross coupling to achieve the mode of operation of a free running multivibrator, and the diode rectifying ladder is configured to operate in a push-pull mode driven from opposite sides of the multivibrator outputs of the ridge switches. The four transistor switches provide a square-wave output voltage which as a peak-to-peak amplitude that is twice the input dc voltage, and is thus useful as a dc-to-ac inverter.

  6. Two-leg SU ( 2 n ) spin ladder: A low-energy effective field theory approach

    DOE PAGES

    Lecheminant, P.; Tsvelik, A. M.

    2015-05-07

    We present a field-theory analysis of a model of two SU( 2n)-invariant magnetic chains coupled by a generic interaction preserving time reversal and inversion symmetry. Contrary to the SU(2)-invariant case the zero-temperature phase diagram of such two-leg spin ladder does not contain topological phases. Thus, only generalized Valence Bond Solid phases are stabilized when n > 1 with different wave vectors and ground-state degeneracies. In particular, we find a phase which is made of a cluster of 2n spins put in an SU( 2n) singlet state. For n = 3, this cluster phase is relevant to ¹⁷³Yb ultracold atoms, withmore » an emergent SU(6) symmetry, loaded in a double-well optical lattice.« less

  7. The power of engagement: implementation of a career ladder program.

    PubMed

    Bourgeault, Robert; Newmark, Jason

    2012-01-01

    At Baystate Health in Massachusetts, the development and implementation of a career ladder program was implemented to reduce turnover and to improve employee satisfaction, morale, and recruitment efforts. There was significant initial expenditure in the program, as a result of promoting the large number of employees with significant experience and seniority. A smaller number of staff are expected to apply for advancement during successive cycles, allowing for decreased incremental expense going forward. Critical to the success of the program was understanding the time commitment, getting senior organizational support and staff buy-in, and justifying the associated expenses. The development and initiation of the program has done much to support a positive work environment with increased morale and higher performance among significant numbers of staff at all levels.

  8. A Touch of...Class!

    ERIC Educational Resources Information Center

    Tweedie, Karen, Ed.

    1987-01-01

    Games for use in the second-language classroom are suggested, including variations on tic-tac-toe and snakes and ladders, races, board games based on American television programs, math activities, and a classroom mystery. (MSE)

  9. Topics

    ERIC Educational Resources Information Center

    Mathematics Teaching, 1971

    1971-01-01

    Problems involving divisibility, the ten coin triangle, five times a week with 4 D, a nomogram for the lens formula, the box and ladder problem, chains of circles, tessellating hexagons, topological woggles, and numbers of triangles are discussed. (CT)

  10. RoboSimian to the Rescue

    NASA Image and Video Library

    2013-07-03

    This artist concept depicts RoboSimian, a disaster-relief and -mitigation robot, grasping the rung of a ladder. RoboSimian is an ape-like robot designed and built at NASA Jet Propulsion Laboratory, Pasadena, Calif.

  11. 46 CFR 160.017-13 - Construction.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of the first step is approximately 600 mm (24 in.). (c) Lashing rings. A lashing ring must be...) Workmanship. A ladder must not have splinters, burrs, sharp edges, corners, projections, or other defects that...

  12. Energetics and electronic properties of Pt wires of different topologies on monolayer MoSe{sub 2}

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jamdagni, Pooja, E-mail: j.poojaa1228@gmail.com; Ahluwalia, P. K.; Kumar, Ashok

    2016-05-23

    The energetics and electronic properties of different topology of Pt wires including linear, zigzag and ladder structures on MoSe{sub 2} monolayer have been investigated in the framework of density functional theory (DFT). The predicted order of stability of Pt wire on MoSe{sub 2} monolayer is found to be: linear > ladder > zigzag. Pt wires induce states near the Fermi level of MoSe{sub 2} that results into metallic characteristics of Pt-wire/MoSe{sub 2} assembled system. Valence band charge density signifies most of the contribution from Pt atoms near the Fermi energy of assembled wire/MoSe{sub 2} system. These findings are expected tomore » be important for the fabrication of devices based on MoSe{sub 2} layers for flexible nanoelectronics.« less

  13. KSC-2012-3995

    NASA Image and Video Library

    2012-07-20

    CAPE CANAVERAL, Fla. – Inside the RLV Hangar near NASA Kennedy Space Center’s Shuttle Landing Facility, or SLF, in Florida, Florida Tech, or FIT, Aviation Program Supervisor Tennesse Garvey, at left on the ladder, and several students view an F104 Starfighter. At right, on the ladder is Starfighter Director Rick Svetkoff. The FIT aviation instructors and their students arrived at the SLF in Cherokee Warrior and Cessna 172S lightweight aircraft. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, viewed the runway plaques marking wheels stop for each of the three space shuttles, and toured the Vehicle Assembly Building where space shuttle Atlantis currently is stored. Photo credit: NASA/Kim Shiflett

  14. By-product formation in repetitive PCR amplification of DNA libraries during SELEX.

    PubMed

    Tolle, Fabian; Wilke, Julian; Wengel, Jesper; Mayer, Günter

    2014-01-01

    The selection of nucleic acid aptamers is an increasingly important approach to generate specific ligands binding to virtually any molecule of choice. However, selection-inherent amplification procedures are prone to artificial by-product formation that prohibits the enrichment of target-recognizing aptamers. Little is known about the formation of such by-products when employing nucleic acid libraries as templates. We report on the formation of two different forms of by-products, named ladder- and non-ladder-type observed during repetitive amplification in the course of in vitro selection experiments. Based on sequence information and the amplification behaviour of defined enriched nucleic acid molecules we suppose a molecular mechanism through which these amplification by-products are built. Better understanding of these mechanisms might help to find solutions minimizing by-product formation and improving the success rate of aptamer selection.

  15. Fall Prevention in Apprentice Carpenters

    PubMed Central

    Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Gaal, John; Fuchs, Mark; Evanoff, Bradley; Faucette, Julia; Gillen, Marion; Deych, Elena

    2013-01-01

    Objectives Falls from heights are a leading cause of mortality and morbidity in the construction industry, especially among inexperienced workers. We surveyed apprentice carpenters to identify individual and organizational factors associated with falls from heights. Methods We developed a 72-item fall prevention survey with multiple domains including fall experience, fall prevention knowledge, risk perceptions, confidence in ability to prevent falls, training experience, and perceptions of the safety climate and crew safety behaviors. We administered the questionnaire to apprentice carpenters in this cross-sectional study. Results Of the 1,025 respondents, 51% knew someone who had fallen from height at work and 16% had personally fallen in the past year, with ladders accounting for most of the falls. Despite participation in school-based and on-the-job training, fall prevention knowledge was poor. Ladders were perceived as low risk and ladder training was rare. Apprentices reported high levels of unsafe fall-related behaviors on their work crews. Apprentices working residential construction were more likely to fall than those working commercial construction, as were apprentices working on crews with fewer senior carpenters to provide mentorship, and those reporting more unsafe behaviors among fellow workers. Conclusions Despite participation in a formal apprenticeship program, many apprentices work at heights without adequate preparation and subsequently experience falls. Apprenticeship programs can improve the timing and content of fall prevention training. This study suggests that organizational changes in building practices, mentorship, and safety culture must also occur in order to decrease worker falls from heights. PMID:19953214

  16. Pruritus: Management Algorithms and Experimental Therapies

    PubMed Central

    Steinhoff, Martin; Cevikbas, Ferda; Ikoma, Akihiko; Berger, Timothy G.

    2013-01-01

    Pruritus (itch) is a major symptom in many dermatologic as well as systemic diseases and has a dramatic impact on the quality of life in these patients. The symptom of itch has to be treated on the basis of its pathophysiology and its underlying disease. In daily practice, a “quick” diagnosis of the underlying disease is often difficult, although a rapid relief of the itch is desired. We often treat patients on the basis of the symptomatology. A rational therapeutic ladder for a symptomatic therapy is useful until the final diagnosis has been confirmed. There are probably many subtypes of pruritus, just as there are many diseases that cause itch. The pathophysiology in many subtypes of pruritus is still poorly understood, hindering a rapid and targeted treatment strategy. An extensive diagnostic workup is often required to determine the final cause(s) of the itch. Thus, in daily life, physicians often start with a more or less rational therapeutic strategy to combat the debilitating itch. We present possible therapeutic ladders that form the basis for effective therapeutic itch strategies in various diseases. On the basis of our current knowledge about the different pathophysiologies of itch, on clinical trials or case reports, and our own clinical experience, we aim to present therapeutic ladders for the rapid as well as long-term management of itch. Finally, we summarize current exciting developments of experimental strategies in itch research and in clinical development for itch therapy. PMID:21767775

  17. Comparison of attitude information for helmet-mounted displays

    NASA Astrophysics Data System (ADS)

    Davy, Eleanor C.; Selcon, Stephen J.

    1997-02-01

    There are many potential uses of helmet-mounted displays (HMDs). One is to allow aircrew to spend increased time off- boresight scanning the outside world for threats or targets. Another is for acquiring a target and subsequently employing a weapon whilst looking off-boresight. An experiment was conducted to examine the use of HMDs for both these tasks using four different attitude displays: pitch ladder, cylinder, arc segmented attitude reference and roll-pitch. The task involved subjects flying a simulated low-level, high-speed mission which was divided into two phases. Phase one required subjects to scan off-boresight for air threats and acquire them by using the off-boresight capability of the HMD. Phase two required subjects to use the head-down display (HDD) to locate ground targets and use the HMD off- boresight capability to acquire them. Novel objective performance measures, designed specifically to evaluate HMD symbology, were collected. Overall, it was found that performance was superior when using the pitch ladder than other displays. This was supported by the subjective findings that it provided higher situational awareness than other displays. It was concluded that the advantage for the pitch ladder may have been due to having the same symbology on the HUD and HMD, enhancing smooth transitioning between the two displays. The importance of developing operationally relevant tasks and measures for the evaluation of HMDs are discussed and the implications of this research for future work are considered.

  18. Optimal web investment in sub-optimal foraging conditions.

    PubMed

    Harmer, Aaron M T; Kokko, Hanna; Herberstein, Marie E; Madin, Joshua S

    2012-01-01

    Orb web spiders sit at the centre of their approximately circular webs when waiting for prey and so face many of the same challenges as central-place foragers. Prey value decreases with distance from the hub as a function of prey escape time. The further from the hub that prey are intercepted, the longer it takes a spider to reach them and the greater chance they have of escaping. Several species of orb web spiders build vertically elongated ladder-like orb webs against tree trunks, rather than circular orb webs in the open. As ladder web spiders invest disproportionately more web area further from the hub, it is expected they will experience reduced prey gain per unit area of web investment compared to spiders that build circular webs. We developed a model to investigate how building webs in the space-limited microhabitat on tree trunks influences the optimal size, shape and net prey gain of arboricolous ladder webs. The model suggests that as horizontal space becomes more limited, optimal web shape becomes more elongated, and optimal web area decreases. This change in web geometry results in decreased net prey gain compared to webs built without space constraints. However, when space is limited, spiders can achieve higher net prey gain compared to building typical circular webs in the same limited space. Our model shows how spiders optimise web investment in sub-optimal conditions and can be used to understand foraging investment trade-offs in other central-place foragers faced with constrained foraging arenas.

  19. Optimal web investment in sub-optimal foraging conditions

    NASA Astrophysics Data System (ADS)

    Harmer, Aaron M. T.; Kokko, Hanna; Herberstein, Marie E.; Madin, Joshua S.

    2012-01-01

    Orb web spiders sit at the centre of their approximately circular webs when waiting for prey and so face many of the same challenges as central-place foragers. Prey value decreases with distance from the hub as a function of prey escape time. The further from the hub that prey are intercepted, the longer it takes a spider to reach them and the greater chance they have of escaping. Several species of orb web spiders build vertically elongated ladder-like orb webs against tree trunks, rather than circular orb webs in the open. As ladder web spiders invest disproportionately more web area further from the hub, it is expected they will experience reduced prey gain per unit area of web investment compared to spiders that build circular webs. We developed a model to investigate how building webs in the space-limited microhabitat on tree trunks influences the optimal size, shape and net prey gain of arboricolous ladder webs. The model suggests that as horizontal space becomes more limited, optimal web shape becomes more elongated, and optimal web area decreases. This change in web geometry results in decreased net prey gain compared to webs built without space constraints. However, when space is limited, spiders can achieve higher net prey gain compared to building typical circular webs in the same limited space. Our model shows how spiders optimise web investment in sub-optimal conditions and can be used to understand foraging investment trade-offs in other central-place foragers faced with constrained foraging arenas.

  20. Signals from the ventrolateral thalamus to the motor cortex during locomotion

    PubMed Central

    Marlinski, Vladimir; Nilaweera, Wijitha U.; Zelenin, Pavel V.; Sirota, Mikhail G.

    2012-01-01

    The activity of the motor cortex during locomotion is profoundly modulated in the rhythm of strides. The source of modulation is not known. In this study we examined the activity of one of the major sources of afferent input to the motor cortex, the ventrolateral thalamus (VL). Experiments were conducted in chronically implanted cats with an extracellular single-neuron recording technique. VL neurons projecting to the motor cortex were identified by antidromic responses. During locomotion, the activity of 92% of neurons was modulated in the rhythm of strides; 67% of cells discharged one activity burst per stride, a pattern typical for the motor cortex. The characteristics of these discharges in most VL neurons appeared to be well suited to contribute to the locomotion-related activity of the motor cortex. In addition to simple locomotion, we examined VL activity during walking on a horizontal ladder, a task that requires vision for correct foot placement. Upon transition from simple to ladder locomotion, the activity of most VL neurons exhibited the same changes that have been reported for the motor cortex, i.e., an increase in the strength of stride-related modulation and shortening of the discharge duration. Five modes of integration of simple and ladder locomotion-related information were recognized in the VL. We suggest that, in addition to contributing to the locomotion-related activity in the motor cortex during simple locomotion, the VL integrates and transmits signals needed for correct foot placement on a complex terrain to the motor cortex. PMID:21994259

  1. Implementation of a pharmacist career ladder program.

    PubMed

    Heavner, Mojdeh S; Tichy, Eric M; Yazdi, Marina

    2016-10-01

    The implementation and outcomes of a pharmacist career ladder program (PCLP) at a tertiary care, academic medical center are described. A PCLP was developed at Yale-New Haven Hospital to guide career development, motivate staff to perform beyond their daily tasks and responsibilities, and recognize and retain high performers through professional advancement. The PCLP advancement criteria include specific requirements for excellence in five categories: level of training and experience, pharmacy practice, drug information, education and scholarship, and leadership. The PCLP is designed with four distinct tiers: clinical pharmacist, clinical pharmacist II, clinical pharmacy specialist, and clinical pharmacy specialist II. The specific criteria are increasingly challenging to achieve when moving up the ladder. Pharmacists may apply voluntarily each year for advancement. A PCLP review committee consisting of pharmacist peers and managers meets annually to discuss and vote on career advancement decisions. Since PCLP implementation, we have observed an increasing success rate for advancement (50% in 2013, 85% in 2014, and 100% in 2015) and a considerable increase in pharmacist participation in clinical and process improvement projects, as well as intervention and medication-use variance documentation. The implementation of a PCLP at a tertiary care, academic medical center provided an opportunity for frontline pharmacists to advance professionally and increased their participation and leadership in clinical and process improvement projects and drug-use policy and medication safety initiatives; the program also increased the number of pharmacists with specialty board certification and peer-reviewed publications. Copyright © 2016 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  2. Four-Photon Stark Induced Ladder Climbing Prepares Large Ensemble of H2in Selected High Lying Vibrational Levels

    NASA Astrophysics Data System (ADS)

    Mukherjee, Nandini; Perreault, William; Zare, Richard

    2017-04-01

    To selectively prepare highly vibrationally excited quantum states of molecules like H2, we present a novel multi-photon ladder-climbing technique where the successive rungs of the ladder are connected by Stark-induced adiabatic Raman passage (SARP). Previously, we have demonstrated that SARP achieves complete population transfer from the v = 0 to the v = 1 and v = 4 levels of H2. We show here that SARP can be generalized into a continuously coupled, multiphoton adiabatic passage which uses one or more intermediate states having strong Raman coupling to access highly vibrationally excited states weakly coupled to the ground state. As an example, we consider the case of four-photon coherent excitation to high vibrational levels of H2 via an intermediate level coupled to both the initial and target levels by two-photon SARP. Using a sequence of commercially available single mode, nanosecond lasers, a pump pulse partially overlapping with two Stokes pulses, we show that the complete population of v = 0 can be selectively transferred to the most weakly coupled v = 6 and v = 9 vibrational levels of H2, without leaving any population stranded in the intermediate level. The present method provides a practical way of generating an entangled pair of fragments without resorting to an ultracold system. This work has been supported by US Army Research Office under ARO Grant No. W911NF-16-1-1061.

  3. Standards for material handling and facilities equipment proofload testing

    NASA Technical Reports Server (NTRS)

    Bonn, S. P.

    1970-01-01

    Document provides information on verifying the safety of material handling and facilities equipment /MH/FE/, ranging from monorail systems to ladders and non-powered mobile equipment. Seven catagories of MH/FE equipment are defined.

  4. 29 CFR 1926.851 - Stairs, passageways, and ladders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... building, when a stairwell is being used, it shall be properly illuminated by either natural or artificial... the structure of a building, shall be used. Other access ways shall be entirely closed at all times...

  5. View behind Cyclorama painting (right) at third floor of rotunda. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View behind Cyclorama painting (right) at third floor of rotunda. Camera located at pier F, looking northwest. Note ladder to catwalk at attic level. - Cyclorama Building, 125 Taneytown Road, Gettysburg, Adams County, PA

  6. Building blocks for career advancement.

    PubMed

    Broomall, Thomas; Snyder, Bruce

    2007-01-01

    After attaining IAHSS certification, protective services officers at CCHMC continue on a Career Ladder Program designed to improve knowledge and performance and improve the chances of officer retention. That program is described in detail in this article.

  7. Population ecology of the sea lamprey (Petromyzon marinus) as an invasive species in the Laurentian Great Lakes and an imperiled species in Europe

    USGS Publications Warehouse

    Hansen, Michael J.; Madenjian, Charles P.; Slade, Jeffrey W.; Steeves, Todd B.; Almeida, Pedro R.; Quintella, Bernardo R.

    2016-01-01

    The sea lamprey Petromyzon marinus (Linnaeus) is both an invasive non-native species in the Laurentian Great Lakes of North America and an imperiled species in much of its native range in North America and Europe. To compare and contrast how understanding of population ecology is useful for control programs in the Great Lakes and restoration programs in Europe, we review current understanding of the population ecology of the sea lamprey in its native and introduced range. Some attributes of sea lamprey population ecology are particularly useful for both control programs in the Great Lakes and restoration programs in the native range. First, traps within fish ladders are beneficial for removing sea lampreys in Great Lakes streams and passing sea lampreys in the native range. Second, attractants and repellants are suitable for luring sea lampreys into traps for control in the Great Lakes and guiding sea lamprey passage for conservation in the native range. Third, assessment methods used for targeting sea lamprey control in the Great Lakes are useful for targeting habitat protection in the native range. Last, assessment methods used to quantify numbers of all life stages of sea lampreys would be appropriate for measuring success of control in the Great Lakes and success of conservation in the native range.

  8. Effect of tributyltin on trout blood cells: changes in mitochondrial morphology and functionality.

    PubMed

    Tiano, Luca; Fedeli, Donatella; Santoni, Giorgio; Davies, Ian; Falcioni, Giancarlo

    2003-05-12

    The aquatic environment is the largest sink for the highly toxic organotin compounds, particularly as one of the main sources is the direct release of organotins from marine antifouling paints. The aim of this study was to investigate the mitochondrial toxicity and proapoptotic activity of tributyltin chloride (TBTC) in teleost leukocytes and nucleated erythrocytes, by means of electron microscopy investigation and mitochondrial membrane potential evaluation, in order to provide an early indicator of aquatic environmental pollution. Erythrocytes and leukocytes were obtained from an inbred strain of rainbow trout (Oncorhynchus mykiss). Transmission electronic micrographs of trout red blood cells (RBC) incubated in the presence of TBTC at 1 and 5 microM for 60 min showed remarkable mitochondrial morphological changes. TBTC-mediated toxicity involved alteration of the cristae ultrastructure and mitochondrial swelling, in a dose-dependent manner. Both erythrocytes and leukocytes displayed a consistent drop in mitochondrial membrane potential following TBTC exposure at concentrations >1 microM. The proapoptotic effect of TBTC on fish blood cells, and involvement of mitochondrial pathways was also investigated by verifying the release of cytochrome c, activation of caspase-3 and the presence of "DNA laddering". Although mitochondrial activity was much more strongly affected in erythrocytes, leukocytes incubated in the presence of TBTC showed the characteristic features of apoptosis after only 1 h of incubation. Longer exposures, up to 12 h, were required to trigger an apoptotic response in erythrocytes.

  9. Relationships Among Lower Body Strength, Power, and Performance of Functional Tasks

    NASA Technical Reports Server (NTRS)

    Ploutz-Snyder, Lori; Ryder, J.; Hackney, K.; Scott-Pandorf, M.; Redd, E.; Buxton, R.; Bloomberg, J.

    2010-01-01

    There is a large degree of variability among crewmembers with respect to decrements in muscle strength and power following long duration spaceflight, ranging from 0 to approx.30% reductions. The purpose of this study was to investigate the influence of varying decrements in lower body muscle strength and power (relative to body weight) on the performance of 2 occupationally relevant tasks (ladder climb and supine egress & walk). Seventeen participants with leg strength similar to US crewmembers performed a leg press power test, an isokinetic knee extension strength test and they were asked to complete the 2 functional tasks as quickly as possible. On additional test days the participants were asked to repeat the functional tasks under 3 conditions where a different external load was applied each time using a weighted suit in order to experimentally manipulate participants strength/body weight and power/body weight ratios. The weight in the suit ranged from 20-120% of body weight and was distributed in proportion to limb segment weights to minimize changes in center of gravity. The ladder task consisted of climbing 40 rungs on a ladder treadmill as fast as possible. The supine egress & walk task consisted of rising from a supine position and walking through an obstacle course. Results show a relatively linear relationship between strength/body weight and task time and power/body weight with task time such that the fastest performance times are associated with higher strength and power with about half the variance in task time is accounted for by a single variable (either strength or power). For the average person, a 20% reduction in power/body weight (from 18 to 14.4 W/kg) induces an increase (slowing) of about 10 seconds in the ladder climb task from 14 to 24 seconds (approx.70%) and a slowing of the supine egress & walk task from 14 to 21 seconds (approx.50%). Similar relationships were observed with strength/body weight and task performance. For the average person, a 20% reduction in strength/body weight (from 2.1 to 1.7 Nm/kg) resulted in a slowing of the ladder climb from 10.5 to 24 seconds (approx.128%) and a slowing of the supine egress & walk from 11 to 20 seconds (approx.82%). These data suggest that the single variable of either low body muscle strength or power, relative to body weight is predictive of about 50% of the variance in task performance time, and that considerable slowing in task performance is associated with relatively typical decrements in muscle performance seen with long duration spaceflight. The observation of a relatively linear relationship between strength/power and task time suggests that across the full spectrum of initial crew strengths and typical decrements in strength previously observed, that task performance would be expected to be slowed following long duration spaceflight. These data will be confirmed in actual spaceflight with subsequent studies.

  10. 29 CFR 1918.22 - Gangways.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) When a fixed flat tread accommodation ladder is used, and the angle is low enough to require employees... serious injury from falls to a lower level. (f) If the foot of a gangway is more than one foot (.30 m...

  11. The Causes and Costs of Promotion Trauma.

    ERIC Educational Resources Information Center

    Darling, Lu Ann W.; McGrath, Loraine G.

    1983-01-01

    Minimizing the stress that nurses experience after a promotion requires an understanding of the factors associated with moving up the managerial ladder. Knowing these factors, nursing administrators can plan their programs to support their managers in transition. (SSH)

  12. Detecting phase boundaries of quantum spin-1/2 XXZ ladder via bipartite and multipartite entanglement transitions

    NASA Astrophysics Data System (ADS)

    Singha Roy, Sudipto; Dhar, Himadri Shekhar; Rakshit, Debraj; Sen(De), Aditi; Sen, Ujjwal

    2017-12-01

    Phase transition in quantum many-body systems inevitably causes changes in certain physical properties which then serve as potential indicators of critical phenomena. Besides the traditional order parameters, characterization of quantum entanglement has proven to be a computationally efficient and successful method for detection of phase boundaries, especially in one-dimensional models. Here we determine the rich phase diagram of the ground states of a quantum spin-1/2 XXZ ladder by analyzing the variation of bipartite and multipartite entanglements. Our study characterizes the different ground state phases and notes the correspondence with known results, while highlighting the finer details that emerge from the behavior of ground state entanglement. Analysis of entanglement in the ground state provides a clearer picture of the complex ground state phase diagram of the system using only a moderate-size model.

  13. On the analysis of para-ammonia observations

    NASA Technical Reports Server (NTRS)

    Kuiper, T. B. H.

    1994-01-01

    The intensities and optical depths of the (1, 1), (2, 2), and (2, 1) inversion transitions of ammonia can be calculated quite accurately without solving the equations of statistical equilibrium. A two-temperature partition function suffices. The excitation of the K-ladders can be approximated by using a temperature obtained from a two-level model with the (2, 1) and (1, 1) levels. Distribution of populations between the ladders is described with the kinetic temperature. This enables one to compute the (1, 1) and (2, 1) inversion transition excitation temperatures and optical depths. To compute the (2, 2) brightness temperatures, the fractional population of the (2, 2) doublet is computed from the population of the (1, 1) doublet using the 'true rotation temperature,' which is calculated using a three-level model with the (2, 1), (2, 2), and (1, 1) levels. In spite of some iterative steps, the calculation is quite fast.

  14. Helicity evolution at small-x

    DOE PAGES

    Kovchegov, Yuri V.; Pitonyak, Daniel; Sievert, Matthew D.

    2016-01-13

    We construct small-x evolution equations which can be used to calculate quark and anti-quark helicity TMDs and PDFs, along with the g1 structure function. These evolution equations resum powers of α s ln 2(1/x) in the polarization-dependent evolution along with the powers of α s ln(1/x) in the unpolarized evolution which includes saturation efects. The equations are written in an operator form in terms of polarization-dependent Wilson line-like operators. While the equations do not close in general, they become closed and self-contained systems of non-linear equations in the large-N c and large-N c & N f limits. As a cross-check,more » in the ladder approximation, our equations map onto the same ladder limit of the infrared evolution equations for g 1 structure function derived previously by Bartels, Ermolaev and Ryskin.« less

  15. Temperature and composition phase diagram in the iron-based ladder compounds Ba 1 - x Cs x Fe 2 Se 3

    DOE PAGES

    Hawai, Takafumi; Nambu, Yusuke; Ohgushi, Kenya; ...

    2015-05-28

    We investigated the iron-based ladder compounds (Ba,Cs)Fe₂Se₃. Their parent compounds BaFe₂Se₃ and CsFe₂Se₃ have different space groups, formal valences of Fe, and magnetic structures. Electrical resistivity, specific heat, magnetic susceptibility, x-ray diffraction, and powder neutron diffraction measurements were conducted to obtain a temperature and composition phase diagram of this system. Block magnetism observed in BaFe₂Se₃ is drastically suppressed with Cs doping. In contrast, stripe magnetism observed in CsFe₂Se₃ is not so fragile against Ba doping. A new type of magnetic structure appears in intermediate compositions, which is similar to stripe magnetism of CsFe₂Se₃, but interladder spin configuration is different. Intermediatemore » compounds show insulating behavior, nevertheless a finite T-linear contribution in specific heat was obtained at low temperatures.« less

  16. General view of the middeck area looking forward and starboard. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    General view of the mid-deck area looking forward and starboard. On the far left of the images are the avionics equipment bays. During missions the forward avionics bays would be fronted by lockers for mission equipment and the flight crew's personal equipment. Sleep stations would be located along the far wall if the orbiter was in a flight ready configuration. The hose and ladder on the right side of the image are pieces of ground support equipment. The hose is part of the climate control apparatus used while orbiters are being processed. The ladder is used to access the inter-deck passage, leading to the flight deck, while the orbiter is in 1g (earth's gravity). This view was taken in the Orbiter Processing Facility at the Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

  17. Poisson equation for the three-loop ladder diagram in string theory at genus one

    NASA Astrophysics Data System (ADS)

    Basu, Anirban

    2016-11-01

    The three-loop ladder diagram is a graph with six links and four cubic vertices that contributes to the D12ℛ4 amplitude at genus one in type II string theory. The vertices represent the insertion points of vertex operators on the toroidal worldsheet and the links represent scalar Green functions connecting them. By using the properties of the Green function and manipulating the various expressions, we obtain a modular invariant Poisson equation satisfied by this diagram, with source terms involving one-, two- and three-loop diagrams. Unlike the source terms in the Poisson equations for diagrams at lower orders in the momentum expansion or the Mercedes diagram, a particular source term involves a five-point function containing a holomorphic and a antiholomorphic worldsheet derivative acting on different Green functions. We also obtain simple equalities between topologically distinct diagrams, and consider some elementary examples.

  18. Preparation and Characterization of Organic-Inorganic Hybrid Macrocyclic Compounds: Cyclic Ladder-like Polyphenylsilsesquioxanes.

    PubMed

    Zhang, Wenchao; Wang, Xiaoxia; Wu, Yiwei; Qi, Zhi; Yang, Rongjie

    2018-04-02

    Organic-inorganic hybrid macrocyclic compounds, cyclic polyphenylsilsesquioxanes (cyc-PSQs), have been synthesized through hydrolysis and condensation reactions of phenyltrichlorosilane. Structural characterization has revealed that cyc-PSQs consist of a closed-ring double-chain siloxane inorganic backbone bearing organic phenyl groups. The cyc-PSQ molecules have been simulated and structurally optimized using the Forcite tool as implemented in Materials Studio. Structurally optimized cyc-PSQs are highly symmetrical and regular with high stereoregularity, consistent with the dimensions of their experimentally derived structures. Thermogravimetric analysis showed that these macrocyclic compounds have excellent thermal stability. In addition to these perfectly structured compounds, macrocyclic compounds with the same ring ladder structure but bearing an additional Si-OH group, cyc-PSQs-OH, have also been synthesized. A possible mechanism for the formation of the closed-ring molecular structures of cyc-PSQs and cyc-PSQs-OH is proposed.

  19. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Marquette, Ian, E-mail: i.marquette@uq.edu.au; Quesne, Christiane, E-mail: cquesne@ulb.ac.be

    The purpose of this communication is to point out the connection between a 1D quantum Hamiltonian involving the fourth Painlevé transcendent P{sub IV}, obtained in the context of second-order supersymmetric quantum mechanics and third-order ladder operators, with a hierarchy of families of quantum systems called k-step rational extensions of the harmonic oscillator and related with multi-indexed X{sub m{sub 1,m{sub 2,…,m{sub k}}}} Hermite exceptional orthogonal polynomials of type III. The connection between these exactly solvable models is established at the level of the equivalence of the Hamiltonians using rational solutions of the fourth Painlevé equation in terms of generalized Hermite andmore » Okamoto polynomials. We also relate the different ladder operators obtained by various combinations of supersymmetric constructions involving Darboux-Crum and Krein-Adler supercharges, their zero modes and the corresponding energies. These results will demonstrate and clarify the relation observed for a particular case in previous papers.« less

  20. Temperature and composition phase diagram in the iron-based ladder compounds Ba1-xCsxFe2Se3

    NASA Astrophysics Data System (ADS)

    Hawai, Takafumi; Nambu, Yusuke; Ohgushi, Kenya; Du, Fei; Hirata, Yasuyuki; Avdeev, Maxim; Uwatoko, Yoshiya; Sekine, Yurina; Fukazawa, Hiroshi; Ma, Jie; Chi, Songxue; Ueda, Yutaka; Yoshizawa, Hideki; Sato, Taku J.

    2015-05-01

    We investigated the iron-based ladder compounds (Ba,Cs ) Fe2Se3 . Their parent compounds BaFe2Se3 and CsFe2Se3 have different space groups, formal valences of Fe, and magnetic structures. Electrical resistivity, specific heat, magnetic susceptibility, x-ray diffraction, and powder neutron diffraction measurements were conducted to obtain a temperature and composition phase diagram of this system. Block magnetism observed in BaFe2Se3 is drastically suppressed with Cs doping. In contrast, stripe magnetism observed in CsFe2Se3 is not so fragile against Ba doping. A new type of magnetic structure appears in intermediate compositions, which is similar to stripe magnetism of CsFe2Se3 , but interladder spin configuration is different. Intermediate compounds show insulating behavior, nevertheless a finite T -linear contribution in specific heat was obtained at low temperatures.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top