Hawaiian fissure fountains 1: decoding deposits-episode 1 of the 1969-1974 Mauna Ulu eruption

USGS Publications Warehouse

Parcheta, C.E.; Houghton, Bruce F.; Swanson, D.A.

2012-01-01

Deposits from episode 1 of the 1969–1974 Mauna Ulu eruption of Kīlauea provide an exceptional opportunity to study processes of low intensity Hawaiian fissure fountains. Episode 1 lava flows passed through dense forest that had little impact on flow dynamics; in contrast, the pattern of spatter preservation was strongly influenced by the forest (through the formation of tree molds) and the preexisting topography. A low, near-continuous spatter rampart is present upwind and upslope, on the north side of the fissure. Most of the pyroclastic products, however, fell downwind to the south of the fissure, but little was preserved due to two processes: (1) incorporation of proximal spatter in rheomorphic lava flows 10–20 m from the vents, and (2) the downslope transport of cooler spatter falling on top of these flows beyond 20 m from vent. The lava flow field itself shows a complex history. Initially, discharge from the fissure exceeded the transport capacity of the southern drainage pathways, and lava ponded dynamically to a maximum height of 4 m for 40–120 min, until fountains began to decline. During declining discharge, lava flowed both southward away from the fissure and increasingly back into the vents. There is a clear “lava-shed” or delineation between where lava drained northwards back into the fissure, and where it continued flowing to the south. The 1969 deposits suggest that care is needed when products of less well-documented eruptions are analyzed, as postdepositional transport of spatter may preclude the formation of classic paired (symmetrical) ramparts.

Evaluation de la qualite osseuse par les ondes guidees ultrasonores =

NASA Astrophysics Data System (ADS)

Abid, Alexandre

La caracterisation des proprietes mecaniques de l'os cortical est un domaine d'interet pour la recherche orthopedique. En effet, cette caracterisation peut apporter des informations primordiales pour determiner le risque de fracture, la presence de microfractures ou encore depister l'osteoporose. Les deux principales techniques actuelles de caracterisation de ces proprietes sont le Dual-energy X-ray Absorptiometry (DXA) et le Quantitative Computed Tomogaphy (QCT). Ces techniques ne sont pas optimales et presentent certaines limites, ainsi l'efficacite du DXA est questionnee dans le milieu orthopedique tandis que le QCT necessite des niveaux de radiations problematiques pour en faire un outil de depistage. Les ondes guidees ultrasonores sont utilisees depuis de nombreuses annees pour detecter les fissures, la geometrie et les proprietes mecaniques de cylindres, tuyaux et autres structures dans des milieux industriels. De plus, leur utilisation est plus abordable que celle du DXA et n'engendrent pas de radiation ce qui les rendent prometteuses pour detecter les proprietes mecaniques des os. Depuis moins de dix ans, de nombreux laboratoires de recherche tentent de transposer ces techniques au monde medical, en propageant les ondes guidees ultrasonores dans les os. Le travail presente ici a pour but de demontrer le potentiel des ondes guidees ultrasonores pour determiner l'evolution des proprietes mecaniques de l'os cortical. Il commence par une introduction generale sur les ondes guidees ultrasonores et une revue de la litterature des differentes techniques relatives a l'utilisation des ondes guidees ultrasonores sur les os. L'article redige lors de ma maitrise est ensuite presente. L'objectif de cet article est d'exciter et de detecter certains modes des ondes guides presentant une sensibilite a la deterioration des proprietes mecaniques de l'os cortical. Ce travail est realise en modelisant par elements finis la propagation de ces ondes dans deux modeles osseux cylindriques. Ces deux modeles sont composes d'une couche peripherique d'os cortical et remplis soit d'os trabeculaire soit de moelle osseuse. Ces deux modeles permettent d'obtenir deux geometries, chacune propice a la propagation circonferentielle ou longitudinale des ondes guidees. Les resultats, ou trois differents modes ont pu etre identifies, sont compares avec des donnees experimentales obtenues avec des fantomes osseux et theoriques. La sensibilite de chaque mode pour les differents parametres des proprietes mecaniques est alors etudiee ce qui permet de conclure sur le potentiel de chaque mode quant a la prediction de risque de fracture ou de presence de microfractures.

Conditions of Fissuring in a Pumped-Faulted Aquifer System

NASA Astrophysics Data System (ADS)

Hernandez-Marin, M.; Burbey, T. J.

2007-12-01

Earth fissuring associated with subsidence from groundwater pumping is problematic in many arid-zone heavily pumped basins such as Las Vegas Valley. Long-term pumping at rates considerably greater than the natural recharge rate has stressed the heterogeneous aquifer system resulting in a complex stress-strain regime. A rigorous artificial recharge program coupled with increased surface-water importation has allowed water levels to appreciably recover, which has led to surface rebound in some localities. Nonetheless, new fissures continue to appear, particularly near basin-fill faults that behave as barriers to subsidence bowls. The purpose of this research is to develop a series of computational models to better understand the influence that structure (faults), pumping, and hydrostratigraphy has in the generation and propagation of fissures. The hydrostratigraphy of Las Vegas Valley consists of aquifers, aquitards and a relatively dry vadoze zone that may be as thick as 100m in much of the valley. Quaternary faults are typically depicted as scarps resulting from pre- pumping extensional tectonic events and are probably not responsible for the observed strain. The models developed to simulate the stress-strain and deformation processes in a faulted pumped aquifer-aquitard system of Las Vegas use the ABAQUS CAE (Complete ABAQUS Environment) software system. ABAQUS is a sophisticated engineering industry finite-element modeling package capable of simulating the complex fault- fissure system described here. A brittle failure criteria based on the tensile strength of the materials and the acting stresses (from previous models) are being used to understand how and where fissures are likely to form. , Hypothetical simulations include the role that faults and the vadose zone may play in fissure formation

Engineering a robotic approach to mapping exposed volcanic fissures

NASA Astrophysics Data System (ADS)

Parcheta, C. E.; Parness, A.; Mitchell, K. L.

2014-12-01

Field geology provides a framework for advanced computer models and theoretical calculations of volcanic systems. Some field terrains, though, are poorly preserved or accessible, making documentation, quantification, and investigation impossible. Over 200 volcanologists at the 2012 Kona Chapman Conference on volcanology agreed that and important step forward in the field over the next 100 years should address the realistic size and shape of volcanic conduits. The 1969 Mauna Ulu eruption of Kīlauea provides a unique opportunity to document volcanic fissure conduits, thus, we have an ideal location to begin addressing this topic and provide data on these geometries. Exposed fissures can be mapped with robotics using machine vision. In order to test the hypothesis that fissures have irregularities with depth that will influence their fluid dynamical behavior, we must first map the fissure vents and shallow conduit to deci- or centimeter scale. We have designed, constructed, and field-tested the first version of a robotic device that will image an exposed volcanic fissure in three dimensions. The design phase included three steps: 1) create the payload harness and protective shell to prevent damage to the electronics and robot, 2) construct a circuit board to have the electronics communicate with a surface-based computer, and 3) prototype wheel shapes that can handle a variety of volcanic rock textures. The robot's mechanical parts were built using 3d printing, milling, casting and laser cutting techniques, and the electronics were assembled from off the shelf components. The testing phase took place at Mauna Ulu, Kīlauea, Hawai'i, from May 5 - 9, 2014. Many valuable design lessons were learned during the week, and the first ever 3D map from inside a volcanic fissure were successfully collected. Three vents had between 25% and 95% of their internal surfaces imaged. A fourth location, a non-eruptive crack (possibly a fault line) had two transects imaging the textures of the walls with depth to compare to the fissure vents. The vent surface irregularity documented by Parcheta et al., (accepted) continues with depth into the fissure; depths are variable depending on the amount of talus filling them. We will show and discuss data from the main field vent location, and movies of descents in to the other vents.

Increased anal basal pressure in chronic anal fissures may be caused by overreaction of the anal-external sphincter continence reflex.

PubMed

van Meegdenburg, Maxime M; Trzpis, Monika; Heineman, Erik; Broens, Paul M A

2016-09-01

Chronic anal fissure is a painful disorder caused by linear ulcers in the distal anal mucosa. Even though it counts as one of the most common benign anorectal disorders, its precise etiology and pathophysiology remains unclear. Current thinking is that anal fissures are caused by anal trauma and pain, which leads to internal anal sphincter hypertonia. Increased anal basal pressure leads to diminished anodermal blood flow and local ischemia, which delays healing and leads to chronic anal fissure. The current treatment of choice for chronic anal fissure is either lateral internal sphincterotomy or botulinum toxin injections. In contrast to current thinking, we hypothesize that the external, rather than the internal, anal sphincter is responsible for increased anal basal pressure in patients suffering from chronic anal fissure. We think that damage to the anal mucosa leads to hypersensitivity of the contact receptors of the anal-external sphincter continence reflex, resulting in overreaction of the reflex. Overreaction causes spasm of the external anal sphincter. This in turn leads to increased anal basal pressure, diminished anodermal blood flow, and ischemia. Ischemia, finally, prevents the anal fissure from healing. Our hypothesis is supported by two findings. The first concerned a chronic anal fissure patient with increased anal basal pressure (170mmHg) who had undergone lateral sphincterotomy. Directly after the operation, while the submucosal anesthetic was still active, basal anal pressure decreased to 80mmHg. Seven hours after the operation, when the anesthetic had completely worn off, basal anal pressure increased again to 125mmHg, even though the internal anal sphincter could no longer be responsible for the increase. Second, in contrast to previous studies, recent studies demonstrated that botulinum toxin influences external anal sphincter activity and, because it is a striated muscle relaxant, it seems reasonable to presume that it affects the striated external anal sphincter, rather than the smooth internal anal sphincter. If our hypothesis is proved correct, the treatment option of lateral internal sphincterotomy should be abandoned in patients suffering from chronic anal fissures, since it fails to eliminate the cause of high anal basal pressure. Additionally, lateral internal sphincterotomy may cause damage to the anal-external sphincter continence reflex, resulting in fecal incontinence. Instead, higher doses of botulinum toxin should be administered to those patients suffering from chronic anal fissure who appeared unresponsive to lower doses. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ground Subsidence Monitoring with MT-InSAR and Mechanism Inversion Over Xi'an, China

NASA Astrophysics Data System (ADS)

Peng, M. M.; Zhao, C. Y.; Zhang, Q.; Zhang, J.; Liu, Y. Y.

2018-04-01

The ancient Xi'an, China, has been suffering severe land subsidence and ground fissure hazards since the 1960s, which has affected the safety of Subways. Multi-sensor SAR data are conducted to monitor the latest complex ground deformation and its influence on subway line No.3 over Xi'an. Annual deformation rates have been retrieved to reveal the spatiotemporal evolution of ground subsidence in Xi'an city from 2013 to 2017. Meanwhile, the correlation between land subsidence and ground fissures are analyzed by retrieving the deformation differences in both sides of the fissures. Besides, the deformation along subway line No. 3 is analyzed, and the fast deformation section is quantitatively studied. Finally, a flat lying sill model with distributed contractions is implemented to model the InSAR deformation over YHZ subsidence center, which manifests that the ground deformation is mainly caused by groundwater withdrawal.

The length of pre-existing fissures effects on the mechanical properties of cracked red sandstone and strength design in engineering.

PubMed

Wu, Jiangyu; Feng, Meimei; Yu, Bangyong; Han, Guansheng

2018-01-01

It is important to study the mechanical properties of cracked rock to understand the engineering behavior of cracked rock mass. Consequently, the influence of the length of pre-existing fissures on the strength, deformation, acoustic emission (AE) and failure characteristics of cracked rock specimen was analyzed, and the optimal selection of strength parameter in engineering design was discussed. The results show that the strength parameters (stress of dilatancy onset and uniaxial compressive strength) and deformation parameters (axial strain and circumferential strain at dilatancy onset and peak point) of cracked rock specimen decrease with the increase of the number of pre-existing fissures, and the relations which can use the negative exponential function to fit. Compared with the intact rock specimens, the different degrees of stress drop phenomena were produced in the process of cracked rock specimens when the stress exceeds the dilatancy onset. At this moment, the cracked rock specimens with the existence of stress drop are not instantaneous failure, but the circumferential strain, volumetric strain and AE signals increase burstingly. And the yield platform was presented in the cracked rock specimen with the length of pre-existing fissure more than 23mm, the yield failure was gradually conducted around the inner tip of pre-existing fissure, the development of original fissures and new cracks was evolved fully in rock. However, the time of dilatancy onset is always ahead of the the time of that point with the existence of stress drop. It indicates that the stress of dilatancy onset can be as the parameter of strength design in rock engineering, which can effectively prevent the large deformation of rock. Copyright © 2017 Elsevier B.V. All rights reserved.

The origin of increased salinity in the Cambrian-Vendian aquifer system on the Kopli Peninsula, northern Estonia

NASA Astrophysics Data System (ADS)

Karro, Enn; Marandi, Andres; Vaikmäe, Rein

Monitoring of the confined Cambrian-Vendian aquifer system utilised for industrial water supply at Kopli Peninsula in Tallinn over 24 years reveals remarkable changes in chemical composition of groundwater. A relatively fast 1.5 to 3.0-fold increase in TDS and in concentrations of major ions in ed groundwater is the consequence of heavy pumping. The main sources of dissolved load in Cambrian-Vendian groundwater are the leaching of host rock and the other geochemical processes that occur in the saturated zone. Underlying crystalline basement, which comprises saline groundwater in its upper weathered and fissured portion, and which is hydraulically connected with the overlying Cambrian-Vendian aquifer system, is the second important source of ions. The fractured basement and its clayey weathering crust host the Ca-Cl type groundwater, which is characterised by high TDS values (2-20 g/L). Intensive water ion accelerates the exchange of groundwaters and increases the area of influence of pumping. Chemical and isotopic studies of groundwater indicate an increasing contribution of old brackish water from the crystalline basement and rule out the potential implication of an intrusion of seawater into aquifer. L'origine de la salinité croissante dans le système aquifère du Cambrien-Vendien dans la péninsule de Kopli, nord de l'Estonie Le suivi à long terme du système aquifère captif du Cambrien-Vendien utilisé pour l'approvisionnement d'eaux industrielles dans la Péninsule de Kopli, nord de l'Estonie, révèle de remarquables changements dans la composition chimique des eaux souterraines. Une augmentation de facteur 1.5 à 3 de la TDS et des concentrations en ions majeurs dans l'eau souterraine est la conséquence de pompages intensifs. Les sources principales des charges dissoutes dans les eaux de l'aquifère du Cambrien-Vendien sont le lessivage des roches et d'autres phénomènes géochimiques ayant lieu dans la zone saturée. Le soubassement rocheux cristallin, qui renferme des eaux souterraines salines dans sa partie supérieure altérée et fissurée, et est hydrauliquement connecté avec l'aquifère supérieur du Cambrien-Vendien, est la deuxième importante source d'ions. Le soubassement fracturé et le matériel argileux de l'altération, renferme l'eau souterraine de type Ca-Cl, caractérisée par un haut TDS (2-20 g/l). A cause de la mobilisation intensive de l'eau les échanges d'eau souterraine est sont accélérés et la zone d'influence des pompages augmentent. Les études chimiques et isotopiques indiquent une contribution croissante du drainage des eaux du soubassement cristallin. L'intrusion d'eaux salées de la mer dans le système aquifère n'est pas un phénomène évident. El origen del incremento en salinidad en un sistema de acuíferos Cámbrico-Vendiano en la Península Kopli, norte de Estonie Monitoreo a largo plazo de un sistema de acuíferos confinados, de edad Cámbrico-Vendiano, que se utiliza como fuente de abastecimiento industrial en la Península Kopli, al norte de Estonie, revela cambios notables en la composición química del agua subterránea. Un incremento de 1.5 a 3 veces en TDS y en concentraciones de iones mayores en agua subterránea explotada ha sido ocasionado por bombeo fuerte. Las fuentes principales de carga disuelta en el agua subterránea Cámbrico-Vendiano son la lixiviación de la roca encajonante y los procesos geoquímicos que ocurren en la zona saturada. Basamento cristalino subyacente, que aloja agua subterránea salada en la parte superior intemperizada y fisurada, y está conectado hidráulicamente con el sistema acuífero Cámbrico-Vendiano sobreyacente, es la segunda fuente importante de iones. El basamento fracturado y su corteza de intemperismo arcillosa alojan agua subterránea de tipo Ca-Cl la cual se caracteriza por valores altos de TDS (2-20 g/l). Debido a extracción intensiva se ha acelerado el intercambio de agua subterránea y se ha incrementado el área de influencia del bombeo. Los estudios químicos e isotópicos de agua subterránea indican una contribución creciente por filtración derivada del basamento cristalino. Es evidente una intrusión de agua salada hacia el sistema de acuíferos con implicaciones subsecuentes para la calidad del agua.

Implications of ground-deformation measurements across earth fissures in subsidence areas in the southwestern USA

USGS Publications Warehouse

Holzer, Thomas L.

2010-01-01

Ground deformation was monitored at earth fissures in areas of land subsidence induced by groundwater extraction in the southwestern United States. The ground deformation is consistent with the mechanism that fissures are caused by horizontal strains generated by bending of overburden in response to localized differential compaction. Subsidence profiles indicated that localized differential subsidence occurred across the fissures and that maximum convex-upward curvature was at the fissure. The overall shape of the profile stayed similar with time, and maximum curvature remained stationary at the fissure. Horizontal displacements were largest near the fissure, and generally were small to negligible away from the fissure. Maximum tensile horizontal strains were at the fissure and coincided with maximum curvature in the subsidence profiles. Horizontal tensile strain continued to accumulate at fissures after they formed with rates of opening ranging from 30 to 120 microstrain/year at fissures in Arizona.

Using operational data to estimate the reliable yields of water-supply wells

NASA Astrophysics Data System (ADS)

Misstear, Bruce D. R.; Beeson, Sarah

The reliable yield of a water-supply well depends on many different factors, including the properties of the well and the aquifer; the capacities of the pumps, raw-water mains, and treatment works; the interference effects from other wells; and the constraints imposed by ion licences, water quality, and environmental issues. A relatively simple methodology for estimating reliable yields has been developed that takes into account all of these factors. The methodology is based mainly on an analysis of water-level and source-output data, where such data are available. Good operational data are especially important when dealing with wells in shallow, unconfined, fissure-flow aquifers, where actual well performance may vary considerably from that predicted using a more analytical approach. Key issues in the yield-assessment process are the identification of a deepest advisable pumping water level, and the collection of the appropriate well, aquifer, and operational data. Although developed for water-supply operators in the United Kingdom, this approach to estimating the reliable yields of water-supply wells using operational data should be applicable to a wide range of hydrogeological conditions elsewhere. Résumé La productivité d'un puits capté pour l'adduction d'eau potable dépend de différents facteurs, parmi lesquels les propriétés du puits et de l'aquifère, la puissance des pompes, le traitement des eaux brutes, les effets d'interférences avec d'autres puits et les contraintes imposées par les autorisations d'exploitation, par la qualité des eaux et par les conditions environnementales. Une méthodologie relativement simple d'estimation de la productivité qui prenne en compte tous ces facteurs a été mise au point. Cette méthodologie est basée surtout sur une analyse des données concernant le niveau piézométrique et le débit de prélèvement, quand ces données sont disponibles. De bonnes données opérationnelles sont particulièrement importantes quand il s'agit de puits dans des aquifères fissurés, libres et peu profonds, dans lesquels la performance réelle d'un puits peut varier considérablement de celle prédite à partir d'une approche plus analytique. Des données essentielles dans les processus d'estimation de la productivité sont l'identification d'un niveau piézométrique de pompage le plus profond possible et le recueil de données opérationnelles appropriées concernant le puits et l'aquifère. Bien qu'elle ait été développée pour des opérateurs gérant des captages en Grande-Bretagne, cette approche de l'estimation de la productivité des puits de captage d'eau potable à partir de données opérationnelles peut être appliquée à une large gamme de conditions hydrogéologiques en d'autres lieux. Resumen La productividad de un pozo de abastecimiento depende de varios factores, entre los que se incluyen las propiedades del pozo y del acuífero, la capacidad de la bomba, las obras de mantenimiento, la interferencia de otras captaciones y las restricciones impuestas por permisos legales, calidad del agua y aspectos ambientales. Se ha desarrollado una metodología relativamente simple para estimar la productividad de un pozo teniendo en cuenta todos los factores previamente mencionados. Esta metodología se basa principalmente en el análisis de niveles y caudales cuando estos datos están disponibles. Se requieren buenos datos de operación, principalmente cuando el pozo está situado en un acuífero de poco espesor, no confinado y en medio fracturado, donde la respuesta del sistema puede diferir enormemente de la predicción analítica. Un punto destacado en el estudio de productividad es la identificación del descenso máximo admisible. Aunque desarrollada para el Reino Unido, la metodología puede ser utilizada a un amplio rango de condiciones hidrogeológicas en otras zonas del mundo.

The effect of normal pulsed Nd-YAG laser irradiation on pits and fissures in human teeth.

PubMed

Bahar, A; Tagomori, S

1994-01-01

The effects of normal pulsed Nd-YAG laser irradiation on the acid resistance of human dental enamel of pits and fissures, the cleaning of the pit and fissure contents and fluoride uptake into deep pits and fissures were examined. The acid resistance of the pit and fissure enamel was evaluated by the amount of dissolved calcium per square millimeter of the surface area. The pit and fissure enamel treated with laser irradiation obtained an acid resistance 30% higher than that of the unlased controls. The cleaning effect of laser irradiation on the pit and fissure contents was compared with chemicomechanical and mechanical methods. The laser irradiation was found to clean the pits and fissures to a greater depth without alterating the shape of pits and fissures, compared with the other two methods. The distribution of calcium, phosphorus and fluoride in the enamel of the pits and fissures was then measured by electron probe microanalyzer. At the entrance and in the deep part of the pits and fissures, the fluoride content of the enamel treated with acidulated phosphate fluoride after laser irradiation was higher than that of the enamel treated with acidulated phosphate fluoride alone. These results thus suggest that Nd-YAG laser irradiation might be effective in increasing the acid resistance of the pit and fissure enamel, while removing the pit and fissure debris contents and increasing the fluoride uptake into the pit and fissure enamel.

Anal Fissure

PubMed Central

Beaty, Jennifer Sam; Shashidharan, M.

2016-01-01

Anal fissure (fissure-in-ano) is a very common anorectal condition. The exact etiology of this condition is debated; however, there is a clear association with elevated internal anal sphincter pressures. Though hard bowel movements are implicated in fissure etiology, they are not universally present in patients with anal fissures. Half of all patients with fissures heal with nonoperative management such as high fiber diet, sitz baths, and pharmacological agents. When nonoperative management fails, surgical treatment with lateral internal sphincterotomy has a high success rate. In this chapter, we will review the symptoms, pathophysiology, and management of anal fissures. PMID:26929749

Shallow Subsurface Structures of Volcanic Fissures

NASA Astrophysics Data System (ADS)

Parcheta, C. E.; Nash, J.; Mitchell, K. L.; Parness, A.

2015-12-01

Volcanic fissure vents are a difficult geologic feature to quantify. They are often too thin to document in detail with seismology or remote geophysical methods. Additionally, lava flows, lava drain back, or collapsed rampart blocks typically conceal a fissure's surface expression. For exposed fissures, quantifying the surface (let along sub0surface) geometric expression can become an overwhelming and time-consuming task given the non-uniform distribution of wall irregularities, drain back textures, and the larger scale sinuosity of the whole fissure system. We developed (and previously presented) VolcanoBot to acquire robust characteristic data of fissure geometries by going inside accessible fissures after an eruption ends and the fissure cools off to <50 C. Data from VolcanoBot documents the fissure conduit geometry with a near-IR structured light sensor, and reproduces the 3d structures to cm-scale accuracy. Here we present a comparison of shallow subsurface structures (<30 m depth) within the Mauna Ulu fissure system and their counterpart features at the vent-to-ground-surface interface. While we have not mapped enough length of the fissure to document sinuosity at depth, we see a self-similar pattern of irregularities on the fissure walls throughout the entire shallow subsurface, implying a fracture mechanical origin similar to faults. These irregularities are, on average, 1 m across and protrude 30 cm into the drained fissure. This is significantly larger than the 10% wall roughness addressed in the engineering literature on fluid dynamics, and implies that magma fluid dynamics during fissure eruptions are probably not as passive nor as simple as previously thought. In some locations, it is possible to match piercing points across the fissure walls, where the dike broke the wall rock in order to propagate upwards, yet in other locations there are erosional cavities, again, implying complex fluid dynamics in the shallow sub-surface during fissure eruptions.

Recent ground fissures in the Hetao basin, Inner Mongolia, China

NASA Astrophysics Data System (ADS)

He, Zhongtai; Ma, Baoqi; Long, Jianyu; Zhang, Hao; Liang, Kuan; Jiang, Dawei

2017-10-01

Ground fissures are a geological hazard with complex formation mechanisms. Increasing amounts of human activity have created more ground fissures, which can destroy buildings and threaten human security. Some ground fissures indicate potentially devastating earthquakes, so we must pay attention to these hazards. This paper documents recently discovered ground fissures in the Hetao basin. These ground fissures are located along the frontal margins of the terraces of the Sertengshan piedmont fault. These fissures are 600-1600 m long, 5-50 cm wide, and at most 1 m deep. These ground fissures emerged after 2010 and ruptured newly constructed roads and field ridges. The deep geodynamic mechanisms within this extensional environment, which is dominated by NE-SW principal compressive shear, involve N-S tensile stress, which has produced continuous subsidence in the Hetao basin and continuous activity along the Sertengshan piedmont fault since the late Quaternary. Trenches across the ground fissures reveal that the fissures are the latest manifestation of the activity of preexisting faults and are the result of creep-slip movement along the faults. The groundwater level in the Hetao basin has been dropping since the 1960s because of overexploitation, resulting in subsidence. When the tensile stress exceeds the ultimate tensile strength of the strata, the strata rupture along preexisting faults, producing ground fissures. Thus, the Sertengshan piedmont fault planes are the structural foundation of the ground fissures, and groundwater extraction induces the development of ground fissures.

A Computational Geometry Approach to Automated Pulmonary Fissure Segmentation in CT Examinations

PubMed Central

Pu, Jiantao; Leader, Joseph K; Zheng, Bin; Knollmann, Friedrich; Fuhrman, Carl; Sciurba, Frank C; Gur, David

2010-01-01

Identification of pulmonary fissures, which form the boundaries between the lobes in the lungs, may be useful during clinical interpretation of CT examinations to assess the early presence and characterization of manifestation of several lung diseases. Motivated by the unique nature of the surface shape of pulmonary fissures in three-dimensional space, we developed a new automated scheme using computational geometry methods to detect and segment fissures depicted on CT images. After a geometric modeling of the lung volume using the Marching Cube Algorithm, Laplacian smoothing is applied iteratively to enhance pulmonary fissures by depressing non-fissure structures while smoothing the surfaces of lung fissures. Next, an Extended Gaussian Image based procedure is used to locate the fissures in a statistical manner that approximates the fissures using a set of plane “patches.” This approach has several advantages such as independence of anatomic knowledge of the lung structure except the surface shape of fissures, limited sensitivity to other lung structures, and ease of implementation. The scheme performance was evaluated by two experienced thoracic radiologists using a set of 100 images (slices) randomly selected from 10 screening CT examinations. In this preliminary evaluation 98.7% and 94.9% of scheme segmented fissure voxels are within 2 mm of the fissures marked independently by two radiologists in the testing image dataset. Using the scheme detected fissures as reference, 89.4% and 90.1% of manually marked fissure points have distance ≤ 2 mm to the reference suggesting a possible under-segmentation of the scheme. The case-based RMS (root-mean-square) distances (“errors”) between our scheme and the radiologist ranged from 1.48±0.92 to 2.04±3.88 mm. The discrepancy of fissure detection results between the automated scheme and either radiologist is smaller in this dataset than the inter-reader variability. PMID:19272987

SURFACE FISSURE FORMATION ABOVE UNDERGROUND COALSEAM FIRES: DIMENSIONLESS RELATIONSHIPS BETWEEN SURFACE FISSURES AND SUBSURFACE SUBSIDENCE

NASA Astrophysics Data System (ADS)

Ide, T. S.; Pollard, D. D.; Orr, F. M.

2009-12-01

Coalbed fires are uncontrolled subsurface fires that occur around the world. These fires are believed to be significant contributors to annual CO2 emissions. Although many of these fires have been burning for decades, researchers have only recently begun to investigate physical mechanisms that control fire behavior. One aspect that is poorly characterized is the relationship between subsurface combustion and surface fissures. At the surface above many fires, long, wide fissures are observed. At a coalbed fire near Durango, Colorado, these fissures form systematic orthogonal patterns that align with regional joints in the Upper Cretaceous Fruitland Formation. Understanding the mechanisms that form and widen these fissures is important, as the fissures are believed to play vital roles in sustaining the combustion in the subsurface by acting as chimneys for the escaping gases and conduits for incoming oxygen. In some of the coalbed fire simulation models available today, these fissures are treated as fixed boundary conditions, but we argue, using field observations and simulation results, that there exists a relationship between the location and magnitude of subsidence caused by the fire and the opening of fissures. Four distinct types of fissures are observed over the coalbed fire near Durango, CO. These fissures are termed ‘molehill’, ‘plateau’, ‘gaping’, and ‘narrow’ based on their surface appearances. Molehill fissures are marked by surface depressions on either side, causing the strata around the opening to form an apex towards the center of the fissure. Plateau fissures show a steep vertical offset on only one side with minimal horizontal displacement. Gaping fissures and narrow fissures are predominantly opening with little evidence for vertical displacements. Gaping fissures are defined as fissures with wide apertures (0.3 ~ 1.5m), while narrow fissures have apertures on the order of centimeters. A boundary element method code was used to show that relationships exist between the surface displacement magnitudes and directions, and the subsurface subsidence due to coal combustion. Subsidence variables include the length, magnitude, depth and location of subsidence, as well as the weight of the overburden. Each of the four types of surface features was related to these subsurface subsidence variables using a set of dimensionless curves. The simulation results were validated with field measurements from a nearby outcrop and borehole drilling. The possibility of using InSAR data to further constrain these model results is being investigated. The simulated dimensionless curves establish a useful rules of thumb to aid the interpretation and mitigation of coal fires, since these curves can be used to relate a surface fissures aperture, an easily measurable parameter, to variables such as the magnitude of subsurface subsidence that are harder to observe

Effets de l'humidite sur la propagation du delaminage dans un composite carbone/epoxy sollicite en mode mixte I/II

NASA Astrophysics Data System (ADS)

LeBlanc, Luc R.

Les materiaux composites sont de plus en plus utilises dans des domaines tels que l'aerospatiale, les voitures a hautes performances et les equipements sportifs, pour en nommer quelques-uns. Des etudes ont demontre qu'une exposition a l'humidite nuit a la resistance des composites en favorisant l'initiation et la propagation du delaminage. De ces etudes, tres peu traitent de l'effet de l'humidite sur l'initiation du delaminage en mode mixte I/II et aucune ne traite des effets de l'humidite sur le taux de propagation du delaminage en mode mixte I/II dans un composite. La premiere partie de cette these consiste a determiner les effets de l'humidite sur la propagation du delaminage lors d'une sollicitation en mode mixte I/II. Des eprouvettes d'un composite unidirectionnel de carbone/epoxy (G40-800/5276-1) ont ete immergees dans un bain d'eau distillee a 70°C jusqu'a leur saturation. Des essais experimentaux quasi-statiques avec des chargements d'une gamme de mixites des modes I/II (0%, 25%, 50%, 75% et 100%) ont ete executes pour determiner les effets de l'humidite sur la resistance au delaminage du composite. Des essais de fatigue ont ete realises, avec la meme gamme de mixite des modes I/II, pour determiner 1'effet de 1'humidite sur l'initiation et sur le taux de propagation du delaminage. Les resultats des essais en chargement quasi-statique ont demontre que l'humidite reduit la resistance au delaminage d'un composite carbone/epoxy pour toute la gamme des mixites des modes I/II, sauf pour le mode I ou la resistance au delaminage augmente apres une exposition a l'humidite. Pour les chargements en fatigue, l'humidite a pour effet d'accelerer l'initiation du delaminage et d'augmenter le taux de propagation pour toutes les mixites des modes I/II. Les donnees experimentales recueillies ont ete utilisees pour determiner lesquels des criteres de delaminage en statique et des modeles de taux de propagation du delaminage en fatigue en mode mixte I/II proposes dans la litterature representent le mieux le delaminage du composite etudie. Une courbe de regression a ete utilisee pour determiner le meilleur ajustement entre les donnees experimentales et les criteres de delaminage en statique etudies. Une surface de regression a ete utilisee pour determiner le meilleur ajustement entre les donnees experimentales et les modeles de taux de propagation en fatigue etudies. D'apres les ajustements, le meilleur critere de delaminage en statique est le critere B-K et le meilleur modele de propagation en fatigue est le modele de Kenane-Benzeggagh. Afin de predire le delaminage lors de la conception de pieces complexes, des modeles numeriques peuvent etre utilises. La prediction de la longueur de delaminage lors des chargements en fatigue d'une piece est tres importante pour assurer qu'une fissure interlaminaire ne va pas croitre excessivement et causer la rupture de cette piece avant la fin de sa duree de vie de conception. Selon la tendance recente, ces modeles sont souvent bases sur l'approche de zone cohesive avec une formulation par elements finis. Au cours des travaux presentes dans cette these, le modele de progression du delaminage en fatigue de Landry & LaPlante (2012) a ete ameliore en y ajoutant le traitement des chargements en mode mixte I/II et en y modifiant l'algorithme du calcul de la force d'entrainement maximale du delaminage. Une calibration des parametres de zone cohesive a ete faite a partir des essais quasi-statiques experimentaux en mode I et II. Des resultats de simulations numeriques des essais quasi-statiques en mode mixte I/II, avec des eprouvettes seches et humides, ont ete compares avec les essais experimentaux. Des simulations numeriques en fatigue ont aussi ete faites et comparees avec les resultats experimentaux du taux de propagation du delaminage. Les resultats numeriques des essais quasi-statiques et de fatigue ont montre une bonne correlation avec les resultats experimentaux pour toute la gamme des mixites des modes I/II etudiee.

Mechanism of Earth Fissures in Beijing,China

NASA Astrophysics Data System (ADS)

Zhang, Y.; Gong, H.; Gu, Z.; Wang, R.; Jia, S.; Li, X.

2013-12-01

Earth fissure is one of the natural hazards that can occur due to different mechanisms. The Beijing city, located in the north of North China Plain, China, has undergone extensive fissuring for the last twenty years. These fissures have caused serious damages to homes, farmlands and infrastructures. The previous investigation shows the distribution and direction of the major earth fissures mostly paralleled to the active fault, such as Huangzhuang-Gaoliying Fault. Hence, tectonic movements were thought to be the major cause of the fissuring in this region. But the subsidence caused by overdraft and other geological, hydrological and mechanical factors may also play important roles in forming earth fissure. The purpose of the work was to further explores the reason for the cause of the earth fissures and their mechanism of formations using field investigations, geophysical surveys, geotechnical tests and numerical analysis. The results indicated that over-extraction groundwater and differential subsidence are the major causes of the fissuring. The active faulting and fault zone provided or created an ideal condition for stress to accumulate. The earth fissures occur at times when the accumulated stress exceed the strength of soil or coupled with other process by which the strength of soil material is reduced. Survey and simulated results reveal the complex pattern of earth fissure including tensile deformation, vertical offset and rotation. The potential locations for future damage were also evaluated. Keywords: Earth Fissure; Mechanism; Beijing; Subsidence; tectonic movement; Geophysical survey

Lung fissure detection in CT images using global minimal paths

NASA Astrophysics Data System (ADS)

Appia, Vikram; Patil, Uday; Das, Bipul

2010-03-01

Pulmonary fissures separate human lungs into five distinct regions called lobes. Detection of fissure is essential for localization of the lobar distribution of lung diseases, surgical planning and follow-up. Treatment planning also requires calculation of the lobe volume. This volume estimation mandates accurate segmentation of the fissures. Presence of other structures (like vessels) near the fissure, along with its high variational probability in terms of position, shape etc. makes the lobe segmentation a challenging task. Also, false incomplete fissures and occurrence of diseases add to the complications of fissure detection. In this paper, we propose a semi-automated fissure segmentation algorithm using a minimal path approach on CT images. An energy function is defined such that the path integral over the fissure is the global minimum. Based on a few user defined points on a single slice of the CT image, the proposed algorithm minimizes a 2D energy function on the sagital slice computed using (a) intensity (b) distance of the vasculature, (c) curvature in 2D, (d) continuity in 3D. The fissure is the infimum energy path between a representative point on the fissure and nearest lung boundary point in this energy domain. The algorithm has been tested on 10 CT volume datasets acquired from GE scanners at multiple clinical sites. The datasets span through different pathological conditions and varying imaging artifacts.

Thoracoscopic anterior ‘fissure first’ technique for left lung cancer with an incomplete fissure

PubMed Central

Samejima, Joji; Matsuura, Yosuke; Nakao, Masayuki; Uehara, Hirofumi; Nakagawa, Ken; Masuda, Munetaka; Okumura, Sakae

2016-01-01

Background Dealing with incomplete lung fissures during thoracoscopic surgery is difficult. Our objective was to evaluate the efficacy and safety of a thoracoscopic anterior ‘fissure first’ technique for dealing with incomplete left lung fissures. Methods One hundred and seventy patients underwent left upper lobectomy or left lower lobectomy between April 2008 and July 2014. Of these, 34 patients underwent surgery using a thoracoscopic anterior ‘fissure first’ technique for incomplete fissures (group A) and 136 underwent surgery using a conventional thoracoscopic method for unfused fissures (group B). A four-port complete thoracoscopic approach was used in all patients. After completion of the fissure, hilar lymphadenectomy was performed in the conventional manner. Results There were no significant differences between the two groups in operating time, blood loss, or duration of chest tube drainage. Patients in group A required more staple cartridges than those in group B (mean number of cartridges, 2.4 vs. 1.1; P<0.01). The two groups did not significantly differ with regard to the prevalence of air leaks (12% vs. 4%; P=0.11), either prolonged or delayed. Conclusions We found that a thoracoscopic anterior ‘fissure first’ technique for left lung cancer with an incomplete fissure enabled hilar lymphadenectomy to be performed in the conventional manner without any increase in the prevalence of air leaks, operating time, or duration of chest tube drainage. This technique should be considered for use in left upper lobectomy or left lower lobectomy in patients with an incomplete fissure. PMID:28066589

A visualization system for CT based pulmonary fissure analysis

NASA Astrophysics Data System (ADS)

Pu, Jiantao; Zheng, Bin; Park, Sang Cheol

2009-02-01

In this study we describe a visualization system of pulmonary fissures depicted on CT images. The purpose is to provide clinicians with an intuitive perception of a patient's lung anatomy through an interactive examination of fissures, enhancing their understanding and accurate diagnosis of lung diseases. This system consists of four key components: (1) region-of-interest segmentation; (2) three-dimensional surface modeling; (3) fissure type classification; and (4) an interactive user interface, by which the extracted fissures are displayed flexibly in different space domains including image space, geometric space, and mixed space using simple toggling "on" and "off" operations. In this system, the different visualization modes allow users not only to examine the fissures themselves but also to analyze the relationship between fissures and their surrounding structures. In addition, the users can adjust thresholds interactively to visualize the fissure surface under different scanning and processing conditions. Such a visualization tool is expected to facilitate investigation of structures near the fissures and provide an efficient "visual aid" for other applications such as treatment planning and assessment of therapeutic efficacy as well as education of medical professionals.

Hydrogen attack - Influence of hydrogen sulfide. [on carbon steel

NASA Technical Reports Server (NTRS)

Eliezer, D.; Nelson, H. G.

1978-01-01

An experimental study is conducted on 12.5-mm-thick SAE 1020 steel (plain carbon steel) plate to assess hydrogen attack at room temperature after specimen exposure at 525 C to hydrogen and a blend of hydrogen sulfide and hydrogen at a pressure of 3.5 MN/sq m for exposure times up to 240 hr. The results are discussed in terms of tensile properties, fissure formation, and surface scales. It is shown that hydrogen attack from a high-purity hydrogen environment is severe, with the formation of numerous methane fissures and bubbles along with a significant reduction in the room-temperature tensile yield and ultimate strengths. However, no hydrogen attack is observed in the hydrogen/hydrogen sulfide blend environment, i.e. no fissure or bubble formation occurred and the room-temperature tensile properties remained unchanged. It is suggested that the observed porous discontinuous scale of FeS acts as a barrier to hydrogen entry, thus reducing its effective equilibrium solubility in the iron lattice. Therefore, hydrogen attack should not occur in pressure-vessel steels used in many coal gasification processes.

Measuring Effects and Success in Influence Operations: Challenges, Limitations and Opportunitites

DTIC Science & Technology

2011-04-01

domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de...documents issus des domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des...la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de l’intelligence

An experimental study on fracture mechanical behavior of rock-like materials containing two unparallel fissures under uniaxial compression

NASA Astrophysics Data System (ADS)

Huang, Yan-Hua; Yang, Sheng-Qi; Tian, Wen-Ling; Zeng, Wei; Yu, Li-Yuan

2016-06-01

Strength and deformability characteristics of rock with pre-existing fissures are governed by cracking behavior. To further research the effects of pre-existing fissures on the mechanical properties and crack coalescence process, a series of uniaxial compression tests were carried out for rock-like material with two unparallel fissures. In the present study, cement, quartz sand, and water were used to fabricate a kind of brittle rock-like material cylindrical model specimen. The mechanical properties of rock-like material specimen used in this research were all in good agreement with the brittle rock materials. Two unparallel fissures (a horizontal fissure and an inclined fissure) were created by inserting steel during molding the model specimen. Then all the pre-fissured rock-like specimens were tested under uniaxial compression by a rock mechanics servo-controlled testing system. The peak strength and Young's modulus of pre-fissured specimen all first decreased and then increased when the fissure angle increased from 0° to 75°. In order to investigate the crack initiation, propagation and coalescence process, photographic monitoring was adopted to capture images during the entire deformation process. Moreover, acoustic emission (AE) monitoring technique was also used to obtain the AE evolution characteristic of pre-fissured specimen. The relationship between axial stress, AE events, and the crack coalescence process was set up: when a new crack was initiated or a crack coalescence occurred, the corresponding axial stress dropped in the axial stress-time curve and a big AE event could be observed simultaneously. Finally, the mechanism of crack propagation under microscopic observation was discussed. These experimental results are expected to increase the understanding of the strength failure behavior and the cracking mechanism of rock containing unparallel fissures.

Does the duration of symptoms of anal fissure impact its response to conservative treatment? A prospective cohort study.

PubMed

Emile, Sameh Hany; Elgendy, Hesham; Elfeki, Hossam; Magdy, Alaa; Abdelmawla, Ahmed Aly; Abdelnaby, Mahmoud; Khafagy, Wael

2017-08-01

Conservative treatment is the first line of treatment for anal fissure. The current study aimed to evaluate the impact of symptom duration on the response of anal fissure to conservative treatment. This prospective study was conducted on sixty patients with acute or chronic anal fissure who were treated conservatively with bulking agents, Sitz baths, and topical glyceryl trinitrate (GTN) 0.2%. Pain and constipation were assessed prior to treatment and at 6 weeks after therapy using visual analogue scale (VAS) and Wexner constipation score. Adverse effects as headache and postural hypotension were also queried. The mean pre-treatment VAS for acute fissure was significantly higher than chronic fissure (8.8 ± 0.96 Vs 5.8 ± 1.12), also the post-treatment VAS for acute fissure was significantly lower at 6 weeks of treatment (0.47 ± 0.8 Vs 2.5 ± 1.3). The baseline Wexner constipation score was comparable in both groups; however, at six weeks of treatment it declined more significantly in patients with acute fissure. Patients with acute fissure achieved significantly better healing than chronic fissure (80% Vs 40%). Healing rates decreased from 100% in patients with symptoms < one month to 33.3% in patients with symptoms >6 months. Conservative treatment including topical GTN 0.2% significantly hastened healing and relieved pain and other symptoms of acute more than chronic anal fissure. Healing rates of anal fissure in response to conservative treatment showed remarkable decrease in proportion to the duration of complaint. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Surface anatomy of the pulmonary fissures determined by high-resolution computed tomography.

PubMed

Heřmanová, Zuzana; Ctvrtlík, Filip; Heřman, Miroslav

2012-10-01

The aim of our study was to describe the surface anatomy of the interlobar fissures using volumetric thin-section high-resolution computed tomography (HRCT). Retrospective assessment of HRCT examinations of 250 patients was performed. The localization of the oblique fissures was marked at three sites: posteriorly at its most superior medial limit, laterally in the midaxillary line, and inferiorly at the junction of the middle and lateral thirds of the hemithorax; posteriorly and laterally, this was to the nearest rib whilst inferiorly the position was described in relation to the diaphragm or chest wall. The localization of the horizontal fissure was marked anteriorly in relation to the nearest rib (or costal cartilage) and posteriorly where it intersected with the oblique fissure (superior, middle, or inferior third). Shapes of the fissures and differences between inspiration and expiration were also documented. Descriptive statistics were used to report the most frequent positions. The most frequent localization of the oblique fissure on the left side was posteriorly at the fourth rib (45%), laterally at the sixth rib (52%), and inferiorly in the anterior third of the hemidiaphragm (60%). The right oblique fissure was located posteriorly at the fifth rib (50%), laterally at the sixth rib (50%), and inferiorly in the anterior third of the hemidiaphragm (71%). The horizontal fissure most commonly originated in the middle third of the oblique fissure (61%) and met the anterior thoracic wall at the level of the fourth rib (51%). The most frequent shape of the left oblique fissure was linear (78%), whereas S-shaped and linear configurations (28% each) were most frequent on the right. No difference was found in the surface markings of the fissures between inspiration and expiration in 90% of cases. The considerable individual variation in the position and shape of the interlobar fissures helps to explain the variable descriptions of their surface anatomy in the literature. Copyright © 2012 Wiley Periodicals, Inc.

Préoccupations de carrière chez les médecins de travail des groupements de Médecine de travail en Tunisie

PubMed Central

Merchaoui, Irtyah; Chouchène, Asma; Bouanène, Ines; Chaari, Néila; Zrafi, Wassim; Henchi, Adnène; Akrout, Mohamed; Amri, Charfeddine

2017-01-01

Introduction L'insatisfaction de carrière des médecins de travail (MT) peut influencer leur performance et la qualité des prestations fournies. L'objectif de notre étude est d'évaluer la satisfaction au travail des MT du terrain de l'ensemble des Groupements de médecine de travail (GMT) de la Tunisie et préciser les facteurs déterminants. Méthodes Il s'agit d'une étude nationale transversale portant sur les MT de 22 GMT, basée sur le questionnaire, validé SAPHORA JOB. Résultats 58% des MT des GMT étaient insatisfaits de leur carrière. La satisfaction de carrière était statistiquement influencée par le nombre d'entreprises en charge (p=0,016), l'organisation du travail (p=0,010),le ressenti du métier (p=0,011),le salaire (p‹10-3) et l'information sur la réglementation en vigueur (p=0,047). Conclusion L'homogénéisation des grilles salariales et des échelons de carrière des MT des GMT basée sur une révision des textes législatifs est indiquée. L'amélioration de l'organisation et des conditions de travail peut permettre un épanouissement au travail et une amélioration des prestations. PMID:28819472

Pulmonary Lobe Segmentation with Probabilistic Segmentation of the Fissures and a Groupwise Fissure Prior

PubMed Central

Bragman, Felix J.S.; McClelland, Jamie R.; Jacob, Joseph; Hurst, John R.; Hawkes, David J.

2017-01-01

A fully automated, unsupervised lobe segmentation algorithm is presented based on a probabilistic segmentation of the fissures and the simultaneous construction of a population model of the fissures. A two-class probabilistic segmentation segments the lung into candidate fissure voxels and the surrounding parenchyma. This was combined with anatomical information and a groupwise fissure prior to drive non-parametric surface fitting to obtain the final segmentation. The performance of our fissure segmentation was validated on 30 patients from the COPDGene cohort, achieving a high median F1-score of 0.90 and showed general insensitivity to filter parameters. We evaluated our lobe segmentation algorithm on the LOLA11 dataset, which contains 55 cases at varying levels of pathology. We achieved the highest score of 0.884 of the automated algorithms. Our method was further tested quantitatively and qualitatively on 80 patients from the COPDGene study at varying levels of functional impairment. Accurate segmentation of the lobes is shown at various degrees of fissure incompleteness for 96% of all cases. We also show the utility of including a groupwise prior in segmenting the lobes in regions of grossly incomplete fissures. PMID:28436850

Expression profiling during ocular development identifies 2 Nlz genes with a critical role in optic fissure closure.

PubMed

Brown, Jacob D; Dutta, Sunit; Bharti, Kapil; Bonner, Robert F; Munson, Peter J; Dawid, Igor B; Akhtar, Amana L; Onojafe, Ighovie F; Alur, Ramakrishna P; Gross, Jeffrey M; Hejtmancik, J Fielding; Jiao, Xiaodong; Chan, Wai-Yee; Brooks, Brian P

2009-02-03

The gene networks underlying closure of the optic fissure during vertebrate eye development are poorly understood. Here, we profile global gene expression during optic fissure closure using laser capture microdissected (LCM) tissue from the margins of the fissure. From these data, we identify a unique role for the C(2)H(2) zinc finger proteins Nlz1 and Nlz2 in normal fissure closure. Gene knockdown of nlz1 and/or nlz2 in zebrafish leads to a failure of the optic fissure to close, a phenotype which closely resembles that seen in human uveal coloboma. We also identify misregulation of pax2 in the developing eye of morphant fish, suggesting that Nlz1 and Nlz2 act upstream of the Pax2 pathway in directing proper closure of the optic fissure.

Monitoring of the Ground Fissure Activity Within Yuncheng Basin by Time Series Insar

NASA Astrophysics Data System (ADS)

Zhang, F.; Yang, C. S.; Zhao, C. Y.; Liu, R. C.

2018-04-01

Yuncheng area is one of the most extensive distributions of ground fissures in Shanxi basin, especially in Yanhu District of Yuncheng, the disaster of ground fissures and ground subsidence are the most serious. According to previous studies, the development and distribution of the ground fissures in this area are mainly controlled by the underlying active faults. In order to provide a better understanding of the formation mechanism, the deformation of ground fissures and its surrounding environment should be taken into consideration. In this paper, PS-InSAR technology was employed to assess the time-series ground deformation of Yuncheng ground fissures and its surrounding area with X-band TerraSAR images from 2013 to 2015. The interaction between ground fissures activity and land subsidence, groundwater, precipitation and surrounding faults will be discussed.

A Case Series of Anal Carcinoma Misdiagnosed as Idiopathic Chronic Anal Fissure.

PubMed

Barbeiro, Sandra; Atalaia-Martins, Catarina; Marcos, Pedro; Gonçalves, Cláudia; Cotrim, Isabel; Vasconcelos, Helena

2017-09-01

Chronic anal fissure is a linear ulcer in the anal canal that has not cicatrized for more than 8-12 weeks of treatment. Most anal fissures are idiopathic and are located in the posterior midline. Squamous cell carcinoma of the anus commonly presents as bleeding and anal pain. It may also present as a mass, nonhealing ulcer, itching, discharge, fecal incontinence and fistulae. Not uncommonly, small and early cancers are misdiagnosed as benign anorectal disorders like anal fissures or hemorrhoids. The clinical suspicion of squamous cell carcinoma of the anus is of paramount importance in patients with nonhealing anal fissures, fissures in atypical positions or with indurated or ulcerated anal tags and in patients with risk factors for the development of anal squamous intraepithelial lesions that are precursors of invasive anal squamous cell carcinoma. The authors present 3 cases of squamous cell carcinoma of the anus initially misdiagnosed as benign chronic anal fissure.

Selection for fissure resistance now made possible in early breeding generations

USDA-ARS?s Scientific Manuscript database

Rice kernel fissuring is one of the leading causes of milling yield losses. Any reduction in fissuring can result in direct increases in yield and profit for both producers and millers. While most U.S. rice varieties yield around 55% head rice, the fissure-resistant varieties ‘Cypress’, ‘Saber’ an...

Infrasound from the 2007 fissure eruptions of Kīlauea Volcano, Hawai'i

NASA Astrophysics Data System (ADS)

Fee, David; Garces, Milton; Orr, Tim; Poland, Mike

2011-03-01

Varied acoustic signals were recorded at Kīlauea Volcano in mid-2007, coincident with dramatic changes in the volcano's activity. Prior to this time period, Pu'u 'Ō'ō crater produced near-continuous infrasonic tremor and was the primary source of degassing and lava effusion at Kīlauea. Collapse and draining of Pu'u 'Ō'ō crater in mid-June produced impulsive infrasonic signals and fluctuations in infrasonic tremor. Fissure eruptions on 19 June and 21 July were clearly located spatially and temporally using infrasound arrays. The 19 June eruption from a fissure approximately mid-way between Kīlauea's summit and Pu'u 'Ō'ō produced infrasound for ˜30 minutes—the only observed geophysical signal associated with the fissure opening. The infrasound signal from the 21 July eruption just east of Pu'u 'Ō'ō shows a clear azimuthal progression over time, indicative of fissure propagation over 12.9 hours. The total fissure propagation rate is relatively slow at 164 m/hr, although the fissure system ruptured discontinuously. Individual fissure rupture times are estimated using the acoustic data combined with visual observations.

Infrasound from the 2007 fissure eruptions of Kīlauea Volcano, Hawai'i

USGS Publications Warehouse

Fee, D.; Garces, M.; Orr, T.; Poland, M.

2011-01-01

Varied acoustic signals were recorded at Kīlauea Volcano in mid-2007, coincident with dramatic changes in the volcano's activity. Prior to this time period, Pu'u 'Ō'ō crater produced near-continuous infrasonic tremor and was the primary source of degassing and lava effusion at Kīlauea. Collapse and draining of Pu'u 'Ō'ō crater in mid-June produced impulsive infrasonic signals and fluctuations in infrasonic tremor. Fissure eruptions on 19 June and 21 July were clearly located spatially and temporally using infrasound arrays. The 19 June eruption from a fissure approximately mid-way between Kīlauea's summit and Pu'u 'O'o produced infrasound for ~30 minutes-the only observed geophysical signal associated with the fissure opening. The infrasound signal from the 21 July eruption just east of Pu'u 'Ō'ō shows a clear azimuthal progression over time, indicative of fissure propagation over 12.9 hours. The total fissure propagation rate is relatively slow at 164 m/hr, although the fissure system ruptured discontinuously. Individual fissure rupture times are estimated using the acoustic data combined with visual observations.

An Investigation of the Morphology of the Petrotympanic Fissure Using Cone-Beam Computed Tomography

PubMed Central

Syriopoulos, Konstantinos; Sens, Rogier L.; Politis, Constantinus

2018-01-01

ABSTRACT Objectives The purpose of the present study was: a) to examine the visibility and morphology of the petrotympanic fissure on cone-beam computed tomography images, and b) to investigate whether the petrotympanic fissure morphology is significantly affected by gender and age, or not. Material and Methods Using Newtom VGi (QR Verona, Italy), 106 cone-beam computed tomography examinations (212 temporomandibular joint areas) of both genders were retrospectively and randomly selected. Two observers examined the images and subsequently classified by consensus the petrotympanic fissure morphology into the following three types: type 1 - widely open; type 2 - narrow middle; type 3 - very narrow/closed. Results The petrotympanic fissure morphology was assessed as type 1, type 2, and type 3 in 85 (40.1%), 72 (34.0%), and 55 (25.9%) cases, respectively. No significant difference was found between left and right petrotympanic fissure morphology (Kappa = 0.37; P < 0.001). Furthermore, no significant difference was found between genders, specifically P = 0.264 and P = 0.211 for the right and left petrotympanic fissure morphology, respectively. However, the ordinal logistic regression analysis showed that males tend to have narrower petrotympanic fissures, in particular OR = 1.58 for right and OR = 1.5 for left petrotympanic fissure. Conclusions The current study lends support to the conclusion that an enhanced multi-planar cone-beam computed tomography yields a clear depiction of the petrotympanic fissure's morphological characteristics. We have found that the morphology is neither gender nor age-related. PMID:29707183

An Investigation of the Morphology of the Petrotympanic Fissure Using Cone-Beam Computed Tomography.

PubMed

Damaskos, Spyros; Syriopoulos, Konstantinos; Sens, Rogier L; Politis, Constantinus

2018-01-01

The purpose of the present study was: a) to examine the visibility and morphology of the petrotympanic fissure on cone-beam computed tomography images, and b) to investigate whether the petrotympanic fissure morphology is significantly affected by gender and age, or not. Using Newtom VGi (QR Verona, Italy), 106 cone-beam computed tomography examinations (212 temporomandibular joint areas) of both genders were retrospectively and randomly selected. Two observers examined the images and subsequently classified by consensus the petrotympanic fissure morphology into the following three types: type 1 - widely open; type 2 - narrow middle; type 3 - very narrow/closed. The petrotympanic fissure morphology was assessed as type 1, type 2, and type 3 in 85 (40.1%), 72 (34.0%), and 55 (25.9%) cases, respectively. No significant difference was found between left and right petrotympanic fissure morphology (Kappa = 0.37; P < 0.001). Furthermore, no significant difference was found between genders, specifically P = 0.264 and P = 0.211 for the right and left petrotympanic fissure morphology, respectively. However, the ordinal logistic regression analysis showed that males tend to have narrower petrotympanic fissures, in particular OR = 1.58 for right and OR = 1.5 for left petrotympanic fissure. The current study lends support to the conclusion that an enhanced multi-planar cone-beam computed tomography yields a clear depiction of the petrotympanic fissure's morphological characteristics. We have found that the morphology is neither gender nor age-related.

Groundwater-Mining-Induced Subsidence and Earth Fissures in Cedar Valley, Southwestern Utah

NASA Astrophysics Data System (ADS)

Knudsen, T. R.; Inkenbrandt, P.; Lund, W. R.; Lowe, M.; Bowman, S. D.

2014-12-01

Groundwater pumping in excess of recharge (groundwater mining) has lowered the potentiometric surface in Cedar Valley, southwestern Utah, by as much as 114 feet since 1939. Lowering the potentiometric surface (head decline) has caused permanent compaction of fine-grained sediments of the Cedar Valley aquifer. Recently acquired interferometric synthetic aperture radar (InSAR) imagery shows that land subsidence is occurring over an ~100 square-mile area, including two pronounced subsidence bowls in the northeastern (Enoch graben) and southwestern (Quichapa Lake area) parts of the valley. A lack of accurate historical benchmark elevation data over much of the valley prevents detailed long-term quantification of subsidence. In response to the land subsidence, earth fissures have formed along the margins of the Enoch graben and north and west of Quichapa Lake. Our initial inventory of Cedar Valley fissures, which relied on aerial-photography analysis, identified 3.9 miles of fissures in 2009. With newly acquired light detection and ranging (LiDAR) coverage in 2011, we more than doubled the total length of mapped fissures to 8.3 miles. Fissures on the west side of the Enoch graben exhibit ongoing vertical surface displacement with rates as high as 1.7 inches/year. The largest Enoch-graben-west fissure has displaced street surfaces, curb and gutter, and sidewalks, and has reversed the flow direction of a sewer line in a partially developed subdivision. Several Cedar Valley fissures are closely associated with, and in some places coincident with, mapped Quaternary faults. While the majority of Cedar Valley fissures are mapped in agricultural areas, continued groundwater mining and resultant subsidence will likely cause existing fissures to lengthen and new fissures to form that may eventually impact other developed areas of the valley.

Research on Integrated Geophysics Detect Potential Ground Fissure in City

NASA Astrophysics Data System (ADS)

Qian, R.

2017-12-01

North China confined aquifer lied 70 to 200 meters below the earth's surface has been exploited for several decades, which resulted in confined water table declining and has generated a mass of ground fissure. Some of them has reached the surface and the other is developing. As it is very difficult to stop the ground fissure coming into being, measures of avoiding are often taken. It brings great potential risk to urban architecture and municipal engineering. It is very important to find out specific distribution and characteristic of potential ground fissure in city with high resolution. The ground fissure is concealed, therefor, geophysical method is an important technology to detecting concealed ground fissure. However, it is very difficult to detect the characteristics of the superficial part of ground fissure directly, as it lies dozens of meters below and has only scores of centimeters fault displacement. This paper studies applied ground penetration radar, surface wave and shallow refleciton seismic to detect ground fissure. It sets up model of surface by taking advantage of high resolution of ground penetrating radar data, constrains Reilay wave inversion and improves its resolution. The high resolution reflection seismic is good at detecting the geology structure. The data processing and interpretation technique is developmented to avoid the pitfall and improve the aliability of the rusult. The experiment has been conducted in Shunyi District, Beijing in 2016. 5 lines were settled to collect data of integrated geophysical method. Development zone of concealed ground fissure was found and its ultra shallow layer location was detected by ground penetrating radar. A trial trench of 6 meters in depth was dug and obvious ground fissure development was found. Its upper end was 1.5 meters beneath the earth's surface with displacement of 0.3 meters. The favorable effect of this detection has provided a new way for detecting ground fissure in cities of China, such as Beijing and Xi'an etc. Keyword: Ground Fissure, GPR, Surface Wave; Shallow Reflection Seismic

Earth-Fissure Movements Associated with Fluctuations in Ground-Water Levels near the Picacho Mountains, South-Central Arizona, 1980-84

USGS Publications Warehouse

Carpenter, M.C.

1993-01-01

The Picacho earth fissure transects subsiding alluvial sediments near the east periphery of the Picacho basin in south-central Arizona. The basin has undergone land subsidence of as much as 3.8 meters since the 1930's owing to compaction of the aquifer system in response to ground-water-Ievel declines that have exceeded 100 meters. The fissure, which extends generally north-south for 15 kilometers, exhibits horizontal tensile failure and as much as 0.6 meter of normal dip-slip movement at the land surface. The west side of the fissure is down thrown. The fissure was observed as early as 1927 and is the longest earth fissure in Arizona. Vertical and horizontal displacements were monitored along a line normal to the fissure. The survey line extends from a bedrock outcrop in the Picacho Mountains on the east, past an observation well near the fissure, to a point 1,422 meters to the west. From May 1980 to May 1984, the downthrown west side of the fissure subsided 167+-1.8 millimeters and moved 18+-1.5 millimeters westward into the basin. Concurrently, the relatively upthrown east side subsided 148+-1.8 millimeters and moved 14+-1.5 millimeters westward. Dislocation modeling of deformation along the survey line near the fissure indicates that dip-slip movement has occurred along a vertical fault surface that extends from the land surface to a depth of about 300 meters. Slip was 9 millimeters from May to December 1980 and also 9 millimeters from March to November 1981. Continuous measurements were made of horizontal movement across the fissure using a buried invar-wire horizontal extensometer, while water-level fluctuations were continuously monitored in four piezometers nested in two observation wells. The range of horizontal movement was 4.620 millimeters, and the range of water-level fluctuation in the nearest piezometer in the deep alluvium was 9.05 meters. The maximum annual opening of the fissure during the study period was 3.740 millimeters from March to October 1981, while the water level declined 7.59 meters. The fissure closed 1.033 millimeters from October 1981 to March 1982, while the water level recovered 6.94 meters. Opening and closing of the fissure were smooth and were correlated with water-level decline and recovery, respectively, recorded in the nearby piezometers. Pearson correlation coefficients between the water-level fluctuations in the deeper piezometers and horizontal movement ranged from 0.913 to 0.925. The correlogram with water-level decline as ordinate and horizontal strain as abscissa exhibits hysteresis loops for annual cycles of water-level fluctuation as well as near-vertical excursions for shorter cycles of pumping and recovery. Vertical and horizontal displacements also were monitored along a second survey line 1 kilometer north of and nearly parallel to the first survey line. The north line extends from bedrock on the east across three fissures to a point 582 meters to the west but does not cross the Picacho earth fissure. From May 1980 to May 1984, the fissure farthest from the mountain front along this line exhibited 20+-1 millimeters of opening and 33.3+-1.1 millimeters of vertical offset; the west side of the fissure was downthrown. During the same period, the zone between this fissure and the mountain front exhibited compression. The hypothesis of generalized differential compaction is supported by data taken at the study site for several reasons. First, the vertical offset across fissures and the fit of deformation to a dislocation model are consistent with an elastic model of differential vertical movement deep in the alluvium. Second, correlation is high between horizontal movement across the Picacho earth fissure and water-level fluctuations in the deeper local piezometers. Third, correlation is high between horizontal movement across the fissure and compaction farther west in the basin. The hypothesis of rotation of a rigid plate is not supported because (1) fissures sometime

Evaluation of oral mucosal lesions in 598 referred Iranian patients.

PubMed

Jahanbani, Jahanfar; Sandvik, Leiv; Lyberg, Torstein; Ahlfors, Eva

2009-03-27

The mucosal membrane of the oral cavity displays at times classical developmental lesions considered to be variations of normal structures rather than having disease characteristics. Of these lesions leukoedema, Fordyce granules, geographic-, fissured- and hairy tongue, median rhomboid glossitis and lingual varices were studied in 598 patients referred to the School of Dentistry, Tehran, Iran. The prevalence was studied in relation to age, gender, occupation, education, smoking habits, general health, addictions and or drug therapies. Oral developmental lesions were seen in 295 patients (49.3%). Only Fordyce granules (27,9%), fissured tongue (12,9%), leukoedema (12,5%) and hairy tongue (8,9%) had enough cases for statistical analysis. Three of these lesions increased with age but not fissured tongue. All were more common in men. After adjusting for age, the parameters education, occupation and complaints upon referral had little influence on the prevalence of the lesions. Fewer Fordyce granules were seen in oral mucosa of smoking men. Leukoedema and hairy tongue were significantly associated with smoking, leukoedema with diabetes mellitus. We conclude that there was a highly significant association between these oral lesions and age, gender and smoking. Few significant associations were found between oral lesions and general diseases.

Automatic segmentation of pulmonary fissures in x-ray CT images using anatomic guidance

NASA Astrophysics Data System (ADS)

Ukil, Soumik; Sonka, Milan; Reinhardt, Joseph M.

2006-03-01

The pulmonary lobes are the five distinct anatomic divisions of the human lungs. The physical boundaries between the lobes are called the lobar fissures. Detection of lobar fissure positions in pulmonary X-ray CT images is of increasing interest for the early detection of pathologies, and also for the regional functional analysis of the lungs. We have developed a two-step automatic method for the accurate segmentation of the three pulmonary fissures. In the first step, an approximation of the actual fissure locations is made using a 3-D watershed transform on the distance map of the segmented vasculature. Information from the anatomically labeled human airway tree is used to guide the watershed segmentation. These approximate fissure boundaries are then used to define the region of interest (ROI) for a more exact 3-D graph search to locate the fissures. Within the ROI the fissures are enhanced by computing a ridgeness measure, and this is used as the cost function for the graph search. The fissures are detected as the optimal surface within the graph defined by the cost function, which is computed by transforming the problem to the problem of finding a minimum s-t cut on a derived graph. The accuracy of the lobar borders is assessed by comparing the automatic results to manually traced lobe segments. The mean distance error between manually traced and computer detected left oblique, right oblique and right horizontal fissures is 2.3 +/- 0.8 mm, 2.3 +/- 0.7 mm and 1.0 +/- 0.1 mm, respectively.

Retention of fissure sealants in young permanent molars affected by dental fluorosis: a 12-month clinical study.

PubMed

Hasanuddin, S; Reddy, E R; Manjula, M; Srilaxmi, N; Rani, S T; Rajesh, A

2014-10-01

To evaluate and compare retention and caries occurance following placement of Clinpro and FUJI VII fissure sealants, by two different techniques simultaneously in unsealed, contralateral young permanent molars of 7- to 10-year-old children affected by mild to moderate dental fluorosis at various recall intervals of 1 week, 1, 3, 6 and 12 months. 80 schoolchildren with mild to moderate dental fluorosis were assigned to Group A and Group B with 40 children in each group. In Group A Clinpro fissure sealant and in Group B Fuji VII fissure sealant was used. In both the groups fissure sealants were applied by conventional fissure sealant technique (CST) on one side and enameloplasty sealant technique (EST) on the other side of the same arch. The applied fissure sealants were evaluated clinically for retention and caries incidence. Clinpro fissure sealant showed a retention rate of 95% when compared with Fuji VII (57.5%) at the end of 12 months, which was statistically significant. Regarding techniques, EST showed better results than CST in both the groups. Comparison of groups with respect to retention and techniques at different time periods was performed using Mann-Whitney U test (p < 0.05). Comparison of different time periods with respect to retention and technique in all the groups was performed using Wilcoxon matched pairs test by ranks (p < 0.05). Clinpro fissure sealant showed better retention at all treatment intervals, when compared with Fuji VII. Further follow-up is required to study the efficacy of the fissure sealant placement techniques.

Effect of air abrasion and polishing on primary molar fissures.

PubMed

Lenzi, T L; Menezes, L B R; Soares, F Z M; Rocha, R O

2013-04-01

To evaluate the effect of air abrasion and polishing on primary molar fissures under light microscopy. 15 exfoliated primary second molars were longitudinally sectioned and photographed under a stereomicroscope (40×; baseline evaluation). Sections were then randomly allocated into one of the two groups (n = 15) and treated by either air abrasion (aluminium oxide jet) or air polishing (sodium bicarbonate jet) for 30 s. After treatment, sections were washed with an air/water spray, dried with absorbent paper, and photographed as previously described (final evaluation). Baseline and final morphology were compared by two blinded examiners who evaluated changes in the width and depth of fissures. The percentage of changed fissures was analysed, and the two treatments were compared using the Mann-Whitney test (α = 0.01). Both air systems resulted in fissure changes in most (93.3 %) of the sections. No significant differences in fissure width changes were found between treatments, but when changes in fissure depth were evaluated, air polishing was found to be less damaging than air abrasion (p < 0.01). Air abrasion and polishing cause changes to the anatomical configuration of occlusal fissures of primary molars.

Automatic lung lobe segmentation of COPD patients using iterative B-spline fitting

NASA Astrophysics Data System (ADS)

Shamonin, D. P.; Staring, M.; Bakker, M. E.; Xiao, C.; Stolk, J.; Reiber, J. H. C.; Stoel, B. C.

2012-02-01

We present an automatic lung lobe segmentation algorithm for COPD patients. The method enhances fissures, removes unlikely fissure candidates, after which a B-spline is fitted iteratively through the remaining candidate objects. The iterative fitting approach circumvents the need to classify each object as being part of the fissure or being noise, and allows the fissure to be detected in multiple disconnected parts. This property is beneficial for good performance in patient data, containing incomplete and disease-affected fissures. The proposed algorithm is tested on 22 COPD patients, resulting in accurate lobe-based densitometry, and a median overlap of the fissure (defined 3 voxels wide) with an expert ground truth of 0.65, 0.54 and 0.44 for the three main fissures. This compares to complete lobe overlaps of 0.99, 0.98, 0.98, 0.97 and 0.87 for the five main lobes, showing promise for lobe segmentation on data of patients with moderate to severe COPD.

Phreatic explosions during basaltic fissure eruptions: Kings Bowl lava field, Snake River Plain, USA

NASA Astrophysics Data System (ADS)

Hughes, Scott S.; Kobs Nawotniak, Shannon E.; Sears, Derek W. G.; Borg, Christian; Garry, William Brent; Christiansen, Eric H.; Haberle, Christopher W.; Lim, Darlene S. S.; Heldmann, Jennifer L.

2018-02-01

Physical and compositional measurements are made at the 7 km-long ( 2200 years B.P.) Kings Bowl basaltic fissure system and surrounding lava field in order to further understand the interaction of fissure-fed lavas with phreatic explosive events. These assessments are intended to elucidate the cause and potential for hazards associated with phreatic phases that occur during basaltic fissure eruptions. In the present paper we focus on a general understanding of the geological history of the site. We utilize geospatial analysis of lava surfaces, lithologic and geochemical signatures of lava flows and explosively ejected blocks, and surveys via ground observation and remote sensing. Lithologic and geochemical signatures readily distinguish between Kings Bowl and underlying pre-Kings Bowl lava flows, both of which comprise phreatic ejecta from the Kings Bowl fissure. These basalt types, as well as neighboring lava flows from the contemporaneous Wapi lava field and the older Inferno Chasm vent and outflow channel, fall compositionally within the framework of eastern Snake River Plain olivine tholeiites. Total volume of lava in the Kings Bowl field is estimated to be 0.0125 km3, compared to a previous estimate of 0.005 km3. The main (central) lava lake lost a total of 0.0018 km3 of magma by either drain-back into the fissure system or breakout flows from breached levees. Phreatic explosions along the Kings Bowl fissure system occurred after magma supply was cut off, leading to fissure evacuation, and were triggered by magma withdrawal. The fissure system produced multiple phreatic explosions and the main pit is accompanied by others that occur as subordinate pits and linear blast corridors along the fissure. The drop in magma supply and the concomitant influx of groundwater were necessary processes that led to the formation of Kings Bowl and other pits along the fissure. A conceptual model is presented that has relevance to the broader range of low-volume, monogenetic basaltic fissure eruptions on Earth, the Moon and other planetary bodies.

Effect of rotary instrumentation on composite bond strength with simulated pulpal pressure.

PubMed

Gupta, Ruchi; Tewari, Sanjay

2006-01-01

This study evaluated the effect of cutting teeth with different types of burs at various speeds on shear bond strength using Prime and Bond NT (Dentsply/DeTrey). A simulated pulpal pressure of 25-mmHg, equivalent to 34 cmH2O, was created in a false pulpal chamber filled with distilled water and maintained for seven days. The human teeth were divided into six groups of 10 teeth each: fine grit straight fissure diamond bur in air rotor (DA), fine grit straight fissure diamond bur in micromotor (DM), crosscut fissure carbide bur in air rotor (CCA), crosscut fissure carbide bur in micromotor (CCM), plain fissure carbide bur in micromotor (CM) and #600-grit silicon carbide paper (SiC). The tooth surfaces in these groups were cut under copious air-water spray and treated with Prime and Bond NT after etching with 38% phosphoric acid. Composite restorations were then prepared with TPH spectrum (Dentsply/ DeTrey). After soaking in water at 37 degrees C for 24 hours, the specimens were loaded at a 45 degrees angle to their longitudinal axes by using a Z 010 Universal Testing Machine (Zwick), and shear bond strengths were determined at a crosshead speed of 2 mm/minute. All of the specimens were then observed under Stereomicroscope at 10x. Statistical analysis was made using one-way and two-way ANOVA and t-test (p < 0.05). The bond strengths achieved with a fine grit straight fissure diamond bur, a crosscut fissure carbide bur in air rotor and a crosscut fissure carbide bur in micromotor, were significantly higher than a fine grit straight fissure diamond bur, a plain fissure carbide bur and #600-grit silicon carbide abrasive paper in the micromotor. Therefore, selecting an appropriate bur and its speed may improve bonding for adhesive systems, although crosscut fissure carbide burs produced high bond strengths at either speed used.

A new model for the growth of basaltic shields based on deformation of Fernandina volcano, Galápagos Islands

USGS Publications Warehouse

Bagnardi, Marco; Amelung, Falk; Poland, Michael P.

2013-01-01

Space-geodetic measurements of surface deformation produced by the most recent eruptions at Fernandina – the most frequently erupting volcano in the Galápagos Archipelago – reveal that all have initiated with the intrusion of subhorizontal sills from a shallow magma reservoir. This includes eruptions from fissures that are oriented both radially and circumferentially with respect to the summit caldera. A Synthetic Aperture Radar (SAR) image acquired 1–2 h before the start of a radial fissure eruption in 2009 captures one of these sills in the midst of its propagation toward the surface. Galápagos eruptive fissures of all orientations have previously been presumed to be fed by vertical dikes, and this assumption has guided models of the origin of the eruptive fissure geometry and overall development of the volcanoes. Our findings allow us to reinterpret the internal structure and evolution of Galápagos volcanoes and of similar basaltic shields. Furthermore, we note that stress changes generated by the emplacement of subhorizontal sills feeding one type of eruption may control the geometry of subsequent eruptive fissures. Specifically, circumferential fissures tend to open within areas uplifted by sill intrusions that initiated previous radial fissure eruptions. This mechanism provides a possible explanation for the pattern of eruptive fissures that characterizes all the western Galápagos volcanoes, as well as the alternation between radial and circumferential fissure eruptions at Fernandina. The same model suggests that the next eruption of Fernandina will be from a circumferential fissure in the area uplifted by the 2009 sill intrusion, just southwest of the caldera rim.

Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

NASA Astrophysics Data System (ADS)

Veres, Teodor

Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques et ceci en fonction de l'epaisseur de la couche magnetique de Co. Nous verrons que dans ces systemes les effets de l'irradiation ionique sont fortement influences par l'energie de surface ainsi que par l'enthalpie de formation, largement positive pour le systeme Co/Ag.

Anal sphincter fibrillation: is this a new finding that identifies resistant chronic anal fissures that respond to botulinum toxin?

PubMed

Moon, A; Chitsabesan, P; Plusa, S

2013-08-01

Anal fissures can be resistant to treatment and some patients may undergo several trials of medical therapy before definitive surgery. It would be useful to identify predictors of poor response to medical therapy. This study assesses the role of anorectal physiological criteria to identify patients with anal fissure predicted to fail botulinum toxin (BT) treatment. A retrospective analysis of anorectal physiological data collected for patients with resistant chronic anal fissures, referred to one consultant surgeon between 2007 and 2011, was undertaken. These were correlated with treatment plans and healing rates. Twenty-five patients with idiopathic chronic anal fissures underwent anorectal physiology studies and were subsequently treated with BT injection. Eleven had a characteristic high-frequency low-amplitude 'saw tooth' waveform or anal sphincter fibrillation (ASF) and higher anal sphincter pressures. Nine (82%) of these patients had resolution of their anal fissure symptoms following treatment with BT. Of 14 patients with no evidence of ASF and a greater range of anal sphincter pressures, only one (7%) had resolution following BT. ASF appears to be an anorectal physiological criterion that helps predict response of anal fissures to BT injection. This could help streamline fissure management. © 2013 The Authors. Colorectal Disease © 2013 The Association of Coloproctology of Great Britain and Ireland.

Effect of Local Crystallographic Texture on the Fissure Formation During Charpy Impact Testing of Low-Carbon Steel

NASA Astrophysics Data System (ADS)

Ghosh, Abhijit; Patra, Sudipta; Chatterjee, Arya; Chakrabarti, Debalay

2016-06-01

The severity of the formation of fissures (also known as splitting or delamination) on the fracture surface of Charpy impact-tested samples of a low-carbon steel has been found to increase with the decrease in finish rolling temperature [1093 K to 923 K (820 °C to 650 °C)]. Combined scanning electron microscopy and electron back-scattered diffraction study revealed that crystallographic texture was the prime factor responsible for the fissure formation. Through-thickness texture band composed of cube [Normal Direction (ND)║<001>] and gamma [ND║<111>] orientations developed during the inter-critical rolling treatment. Strain incompatibility between these two texture bands causes fissure cracking on the main fracture plane. A new approach based on the angle between {001} planes of neighboring crystals has been employed in order to estimate the `effective grain size,' which is used to determine the cleavage fracture stress on different planes of a sample. The severity of fissure formation was found to be directly related to the difference in cleavage fracture stress between the `main fracture plane' and `fissure plane.' Clustering of ferrite grains having cube texture promoted the fissure crack propagation along the transverse `fissure plane,' by increasing the `effective grain size' and decreasing the cleavage fracture stress on that plane.

Monitoring on Xi'an ground fissures deformation with TerraSAR-X data

USGS Publications Warehouse

Zhao, C.; Zhang, Q.; Zhu, W.; Lu, Z.

2012-01-01

Owing to the fine resolution of TerraSAR-X data provided since 2007, this paper applied 6 TerraSAR data (strip mode) during 3rd Dec. 2009 to 23rd Mar. 2010 to detect and monitor the active fissures over Xi'an region. Three themes have been designed for high precision detection and monitoring of Xi'an-Chang'an fissures, as small baseline subsets (SBAS) to test the atmospheric effects of differential interferograms pair stepwise, 2-pass differential interferogram with very short baseline perpendicular to generate the whole deformation map with 44 days interval, and finally, corner reflector (CR) technique was used to closely monitor the relative deformation time series between two CRs settled crossing two ground fissures. Results showed that TerraSAR data are a good choice for small-scale ground fissures detection and monitoring, while special considerations should be taken for their great temporal and baseline decorrelation. Secondly, ground fissures in Xi'an were mostly detected at the joint section of stable and deformable regions. Lastly, CR-InSAR had potential ability to monitor relative deformation crossing fissures with millimeter precision.

Risk factors special to eastern culture for the development of anal fissure.

PubMed

Erel, Serap; Adahan, Didem; Kismet, Kemal; Caylan, Ayse; Tanrikulu, Yusuf; Akkus, Mehmet Ali

2009-01-01

To reveal the effect of diet, bowel functions and toilet habits on the development of anal fissure. One hundred patients complaining of anal fissure were included to the case group; and one hundred age- and gender-matched patients referred for other reasons except for anorectal complaints were included to the control group. The information was obtained by face to face interviews using questionnaires. Statistically significant differences were found in coffee, fruit, and meat consumption between the groups. The patients suffering from anal fissure avoided paprika consumption. The rate of anal fissure incidence was higher in squat toilet users. This study is the first study which evaluates the risk factors such as paprika consumption and squat toilet usage that are specific to Eastern culture. Further studies including large numbers of population are needed to evaluate different risk factors for anal fissure development (Tab. 2, Ref. 11). Full Text (Free, PDF) www.bmj.sk.

Chemical spring water measurements coupled with 2d u.d.e.c hydromechanical modelling as an investigation methodology of water infiltration influence on large moving rock mass stability : application to the "la clapière" landslide (france, 06).

NASA Astrophysics Data System (ADS)

Cappa, F.; Guglielmi, Y.; Soukatchoff, V. M.; Mudry, J.; Bertrand, C.; Charmoille, A.

2003-04-01

We present an investigation method of water infiltration influence on Large Moving Rock Mass (LMRM) stability. In the case of huge unstable mountainous slopes, it has been clearly shown that the main driving of instability is gravity and that the major triggering and increasing factor is water located in interstices and fractures of rocks (Noverraz &al., 1998). More particularly, groundwater originates from a localized hydro-mechanical deformation inside fractures that can induce a generalized destabilization of large rock masses (Guglielmi, 1999). However, the understanding of groundwater mechanical effects on landslides and their neighbouring environment is rendered more complex given the large anisotropy of the rock mass as well as the difficulties to apply classic hydrogeological investigation methods in a moving environment. For these reasons, we developped an indirect investigation method based on chemical groundwater measurements coupled with a two-dimensional hydro-mechanical modelling with the Universal Distinct Element Code (UDEC) numerical program, taking the example of the La Clapière landslide (Alpes-Maritimes, France). The methodology we develop firstly establishes a hydro-mechanical conceptual scheme through the analysis of geological, hydrogeological, hydrogeochemistry and landslide velocity measurements. Then, a two-dimensional numerical modelling with UDEC was performed to test the influence of the locations and the intensities of water infiltrations on the hydro-mechanical behaviour of La Clapière’s slope. A geological and hydrogeological analysis reveals a perched saturated zone connected by large conducting-flow fractures to a basal aquifer. The correlations of spring water chemistry data and meteorological events on the slope highlight a large variability of groundwater transits in the slope in time (transit durations of 1 to 21 days) and in space. Infiltration transients correlate with landslide accelerations. Infiltration yields range between 0.4 and 0.8 l.s-1. The most intensive hydro-mechanical response of the landslide is linked to snowmelt in a stable area in the upper part of the slope located between 1800 and a 2500 m high. On the one hand modeling hydro-mechanical effects with UDEC considers a model corresponding to a slope without any unstable zone, and on the other hand, a model including a failure surface in order to simulate the current instability. In the two numerical tests, calculations show that the most unstabilizing water infiltration corresponds to water infiltrations located in the middle part of the slope for weak flow rates of 0.75 l.s-1. This is due to the water infiltration influence on the spatial distribution of strain fields. This result fits with field measurements. This methodology can easily be applied to the monitoring of landslide movements. As it gives relevant information on the spatial and temporal effects of various meteoric infiltrations, it can be applied to improve remedial protocols. This work was partly funded by the French National Program on Natural Hazards (PNRN) and Retina European Program. Guglielmi Y., 1999. Apport de la mesure des couplages hydromécaniques à la connaissance hydrogéologique des réservoirs fissurés. Habilitation à diriger des recherches, Université de Franche-Comté, E.A. 2642 Géosciences : Déformation, Écoulement, Transfert. 187 p. Noverraz F., BonnardC., Dupraz H., and Huguenin L., 1998. Grands glissements de versants et climat. Rapport final PNR 31, vdf hochschulverlag AG an der ETH Zürich, 314 p.

Diffusion thermique et de porteurs de courant au voisinage d'un joint de grain

NASA Astrophysics Data System (ADS)

Lepoutre, F.

1993-07-01

The photothermal methods (indirect detection of the temperature increase of a sample after absorption of a pulsed or modulated light beam) allow to measure the thermal and electronic diffusions that follow the optical absorption. We report the main applications of a photothermal microscope that we have built to provide informations about these diffusion phenomena at a micronic scale. Comparisons between the photothermal observations and microanalysis data associated with electronic microscopy have been achieved to get qualitative informations. In the case of a purely thermal diffusion this apparatus is able to detect the resistances which may appear at grain boundaries or inside the grains themselves. We present some interesting experimental features which seem to be closely related to the physical origins of these resistances (crystal orientation, dislocation, segregation, secondary phases, cracks). Using a theoretical model developed by other authors we also report quantitative values of the detected thermal resistances that we relate to macroscopic thermal diffusivities measurements of the inspected materials. When electronic carriers are photogenerated by the light excitation, the photothermal microscope can be used to follow the diffusion and the recombination of these carriers. A competition between plasma and heat diffusions is then observed. Such a competition is illustrated in the case of silicon bicristals containing metallic impurities. Les méthodes phototherrniques (détection indirecte de l'accroissement de température d'un échantillon après absorption d'un flux lumineux modulé ou pulsé de lumière) permettent d'étudier les diffusions thermique et électronique qui suivent l'absorption optique. Nous présentons dans cet article les principales applications d'un microscope photothermique que nous avons construit pour suivre les phénomènes de diffusion à l'échelle du micromètre. Des comparaisons entre les observations photothermiques et des résultats de microanalyse permettent d'obtenir des informations qualitatives. Dans les cas où les phénomènes observés sont purement thermiques, cet appareil permet de détecter les résistances thermiques qui apparaissent aux joints de grain ou à l'intérieur des grains eux-mêmes. Nous présentons des résultats expérimentaux qui semblent reliés à l'origine physique de ces résistances thermiques de contact (orientation cristalline, ségrégation, phase secondaire, dislocation, fissuration). En utilisant un modèle théorique développé par d'autres auteurs, nous rapportons également des valeurs quantitatives de résistances thermiques qui ont pu être reliées à des mesures macroscopiques de la diffusivité thermique des matériaux inspectés. Lorsque l'excitation lumineuse génère des porteurs électroniques, le microscope photothermique peut être utilisé pour suivre la diffusion et la recombinaison de ces porteurs. La compétition entre les diffusions électronique et thermique est alors observée. Une illustration de ces phénomènes est donnée dans le cas des bicristaux de silicium contenant des impuretés métalliques.

Combined treatment approach to chronic anal fissure with associated anal fistula.

PubMed

FitzDowse, Andrew J; Behrenbruch, Corina C; Hayes, Ian P

2017-12-03

Anal fistula in association with chronic anal fissure (fissure-fistula) is infrequently described. Recognizing this association and managing both components may help prevent some treatment failures seen with chronic anal fissure. This study aims to report on the outcomes of 20 consecutive patients with fissure-fistula managed with fistulotomy and injection of botulinum A toxin. The study is a retrospective, observational study, assessing the success of symptom resolution following fistulotomy with botulinum A toxin, in patients identified as having a chronic anal fissure with associated anal fistula. The study included all patients with this condition treated with combination treatment by a single surgeon at a tertiary care hospital between January 2013 and January 2016. Twenty patients with fissure-fistula treated with fistulotomy and botulinum toxin A were identified. The median cohort age was 44 years (range 25-78), with a predominance of males (80%) and posterior fissure position (80%). The most common presenting symptoms were anal pain (70%), rectal bleeding (55%), anal discharge (35%) and anal pruritus (35%). Mean follow-up was 10.5 weeks and all patients who attended follow-up appointments reported resolution of symptoms. There were no cases of incontinence and none of the cohort required further surgical intervention for the condition. Chronic anal fissure with associated anal fistula can be successfully managed with fistulotomy and injection of botulinum toxin A. Further studies would be helpful in determining if recognition and management of the fistula component in isolation with fistulotomy is as effective as fistulotomy plus botulinum A toxin. © 2017 Royal Australasian College of Surgeons.

Numerical simulation of earth fissures caused by overly aquifer exploitation at Guangming Village, China

NASA Astrophysics Data System (ADS)

Ye, S.; Franceschini, A.; Zhang, Y.; Janna, C.; Gong, X.; Yu, J.; Teatini, P.

2017-12-01

Earth fissures accompanying anthropogenic land subsidence due to overly aquifer exploitation create significant geohazards in China. In the framework of an efficient and safe management of groundwater, numerical models represent a unique scientific approach to predict the generation and development of earth fissures. However, the common geomechanical simulators fail to reproduce fissure development because, due to compatibility conditions, they cannot be effectively applied in discontinuous mechanics. We present an innovative modelling approach for the simulation of fissure development. Firstly, a regional 3D groundwater model is calibrated on available piezometric records; secondly, the regional outcome is used to define the boundary conditions of a local 3D groundwater model developed at the fissure scale and implementing a refined discretization of the local hydrogeologic setting; finally, the pressure change are used as forcing factor in a local 3D geomechanical model, which combines Finite Elements and Interface Elements to simulate the deformation of the continuous aquifer system and the generation and sliding/opening of earth fissures The approach has been applied to simulate the earth fissure at Guangming Village in Wuxi, China with land subsidence of more than 1 m caused by the overexploitation of the second confined aquifer. The first earth fissure was observed in 1998. It developed fast from 1998 to 2007. The domain addressed by the local simulations is 2 km wide and 5 km long. The thickness of the aquifer system ranges from 0 m, in the proximity of a mountain ridge southward, to 210 m northward and includes a phreatic aquifer, the first and second confined aquifers, and four aquitards. The simulations spanned the period from 1980, i.e. before the inception of large groundwater withdrawals, to 2015. The modelling results highlight that the earth fissures at Guangming Village have been caused by tension and shear, which developed from the land surface downward. The main factors contributing to fissure generation include the shallow bedrock with a sharp ridge, the asymmetric shape of ridge, the uneven thickness of the sedimentary deposits at the west and east side of the buried ridge together with a different pressure change that have been responsible for differential land subsidence.

Relation between "terra rossa" from the Apulia aquifer of Italy and the radon content of groundwater: Experimental results and their applicability to radon occurrence in the aquifer

NASA Astrophysics Data System (ADS)

Tadolini, T.; Spizzico, M.

The radon-222 (222Rn) activity in groundwater of the Apulian karstic aquifer in southern Italy is as great as 500 Becquerel per liter (Bq/L) locally. Normal radium-226 (226Ra) activity in the limestone and calcareous dolomites of the aquifer is not enough to explain such a high level. Laboratory investigations identified high 226Ra activity in the "terra rossa," the residuum occupying fissures and cavities in the bedrock, and also the relation between (1) 226Ra-bearing bedrock and "terra rossa" and (2) 222Rn in water. The "terra rossa" is the primary source of the radon in the groundwater. The experimental results show the need to characterize the "terra rossa" of Apulia on the basis of 226Ra activity and also to study the distribution and variations in 222Rn activity over time in the aquifer. Résumé L'activité du radon-222 (222Rn) dans les eaux souterraines de l'aquifère karstique des Pouilles, dans le sud de l'Italie, atteint localement 500 Becquerel par litre (Bq/L). L'activité normale du radium-226 (226Ra) dans les calcaires et dans les calcaires dolomitiques de l'aquifère n'est pas assez élevée pour expliquer des valeurs aussi élevées. Des analyses de laboratoire ont mis en évidence une forte activité en 226Ra dans la terra rossa, remplissage de fissures et de cavités de la roche, ainsi qu'une relation entre (1) la roche et la terra rossa contenant du 226Ra et (2) le 222Rn dans l'eau. La terra rossa est la source primaire de radon dans l'eau souterraine. Les résultats expérimentaux montrent qu'il est nécessaire de caractériser la terra rossa des Pouilles par son activité en 226Ra et d'étudier la distribution et les variations de l'activité en 222Rn au cours du temps dans l'aquifère. Resumen La actividad del radon-222 (222Rn) en el agua subterránea del acuífero cárstico de Apulia, al sur de Italia, alcanza localmente los 500Bq/L. La actividad normal del radio-226 (226Ra) en las calcitas y dolomitas del acuífero no es suficiente para explicar estos niveles tan altos. Las investigaciones de laboratorio han identificado alta actividad de 226Ra en la "terra rossa", el material que rellena las fisuras y cavidades de la matriz rocosa, y han identificado también la relación entre (1) el 226Ra presente en la roca portante y la "terra rossa" y (2) el contenido de 222Rn en el agua. La "terra rossa" es, pues, la fuente principal de radón en las aguas subterráneas. Los resultados experimentales muestran la necesidad de caracterizar la "terra rossa" de Apulia sobre la base de la actividad de 226Ra, así como de estudiar la distribución y las variaciones en la actividad del 222Rn en el acuífero a lo largo del tiempo.

Une recension des écrits concernant la réalité psychoaffective des femmes ayant une vulvodynie : Difficultés rencontrées et stratégies développées

PubMed Central

Cantin-Drouin, Maude; Damant, Dominique; Turcotte, Daniel

2008-01-01

HISTORIQUE : Au cours des trois dernières décennies, une attention grandissante a été portée à l’étude du syndrome de vulvodynie, soit un inconfort vulvaire chronique inexpliqué, éprouvé en l’absence de pathologie précisée. En plus d’avoir des répercussions physiques, l’expérience de la vulvodynie comporte une dimension psychosociale. OBJECTIF : Cet article vise à faire une recension des écrits sur la réalité psychoaffective des femmes qui éprouvent une vulvodynie. MÉTHODE : Une recherche documentaire basée sur une exploration systématique de textes présentant des résultats de recherche et recensés dans les principales banques de données en sciences sociales, dont Dissertation Abstracts, Current Contents et PsycINFO, a été réalisée. RÉSULTATS : Cette recension des écrits révèle, malgré la présence de certains résultats divergents, que les femmes ayant une vulvodynie affrontent souvent des difficultés identitaires et psychologiques, qui sont influencées notamment par les normes sociales de sexualité et de féminité. Pour composer avec ces difficultés, les femmes développent différentes stratégies visant à diminuer le stress occasionné par la douleur et à améliorer leur bien-être psychologique. CONCLUSION : Les difficultés relationnelles et psychologiques vécues par les femmes ayant une vulvodynie ne découlent pas seulement de la douleur physique, mais aussi du sens qu’elles lui accordent, souvent influencé par les discours sociaux sur l’hétérosexualité et la féminité. Il importe donc d’intervenir auprès des femmes en tenant compte de l’influence du contexte social tout en poursuivant le développement des connaissances sur les aspects psychosociaux de cette expérience. PMID:18592063

Shallow Subsurface transport and eruption of basaltic foam

NASA Astrophysics Data System (ADS)

Parcheta, C. E.; Mitchell, K. L.

2016-12-01

Volcanic fissure vents are difficult to quantify, and details of eruptive behavior are elusive even though it is the most common eruption mechanism on Earth and across the solar system. A fissure's surface expression is typically concealed, but when a fissure remains exposed, its subsurface conduit can be mapped post-eruptively with VolcanoBot. The robot uses a NIR structured light sensor that reproduces a 3D surface model to cm-scale accuracy, documenting the shallow conduit. VolcanoBot3 has probed >1000m3 of volcanic fissure vents at the Mauna Ulu fissure system on Kilauea. Here we present the new 3D model of a flared vent on the Mauna Ulu fissure system. We see a self-similar pattern of irregularities on the fissure walls throughout the entire shallow subsurface, implying a fracture mechanical origin similar to faults. These irregularities are typically 1 m across, protrude 30 cm horizontally into the drained fissure, and have a vertical spacing of 2-3 m. However, irregularity size is variable and distinct with depth, potentially reflecting stratigraphy in the wall rock. Where piercing points are present, we infer the dike broke the wall rock in order to propagate upwards; where they are not, we infer that syn-eruptive mechanical erosion has taken place. One mechanism for mechanical erosion is supersonic shocks, which may occur in Hawaiian fountains. We are calculating the speed of sound in 64% basaltic foam, which appears to be the same velocity (or slightly slower) than inferred eruption velocities. Irregularities are larger than the maximum 10% wall roughness used in engineering fluid dynamic studies, indicating that magma fluid dynamics during fissure eruptions are probably not as passive nor as simple as previously thought. We are currently using the mapped conduit geometries and derived speed of sound for basaltic foam in fluid dynamical modeling of fissure-fed lava fountains.

A study on using texture analysis methods for identifying lobar fissure regions in isotropic CT images.

PubMed

Wei, Q; Hu, Y

2009-01-01

The major hurdle for segmenting lung lobes in computed tomographic (CT) images is to identify fissure regions, which encase lobar fissures. Accurate identification of these regions is difficult due to the variable shape and appearance of the fissures, along with the low contrast and high noise associated with CT images. This paper studies the effectiveness of two texture analysis methods - the gray level co-occurrence matrix (GLCM) and the gray level run length matrix (GLRLM) - in identifying fissure regions from isotropic CT image stacks. To classify GLCM and GLRLM texture features, we applied a feed-forward back-propagation neural network and achieved the best classification accuracy utilizing 16 quantized levels for computing the GLCM and GLRLM texture features and 64 neurons in the input/hidden layers of the neural network. Tested on isotropic CT image stacks of 24 patients with the pathologic lungs, we obtained accuracies of 86% and 87% for identifying fissure regions using the GLCM and GLRLM methods, respectively. These accuracies compare favorably with surgeons/radiologists' accuracy of 80% for identifying fissure regions in clinical settings. This shows promising potential for segmenting lung lobes using the GLCM and GLRLM methods.

Laser fluorescence of dentin caries covered with a novel nano-filled sealant.

PubMed

Braun, Andreas; Beisel, Christian; Brede, Olivier; Krause, Felix

2013-01-01

The aim of the present study was to assess the possibility to measure caries-induced laser fluorescence underneath a novel nano-filled fissure sealant. Sixty freshly extracted human teeth with occlusal dentine carious lesions were horizontally divided, exposing the respective lesion. Teeth were randomly assigned to three groups: (I) white fissure sealant with filler particles (Fissurit F, Voco), (II) clear fissure sealant without filler particles (Fissurit, Voco) and (III) novel experimental fissure sealant with nano-filler particles (Voco). Starting with a sealant thickness of 3 mm, laser fluorescence measurements (DIAGNOdent, KaVo) were performed after finishing the sealant surfaces with polishing papers, reducing the material at intervals of 0.5 mm until the sealant was removed completely. Evaluating a thickness of 0.5 mm, both the clear (83 % of the baseline fluorescence after fine grit polishing) and the white sealant (25 %) did not allow to measure baseline fluorescence (p < 0.05) with no fluorescence reduction in the experimental sealant group (p > 0.05). With increasing sealer thickness, fluorescence was influenced even by the experimental material (89 % of the baseline value at 1 mm). However, by using the experimental material, statistically significant higher fluorescence values than those for the other materials under study (p < 0.05) were obtained. Thicker sealant layers and coarse grit polishing caused a decrease of laser fluorescence in all groups (p < 0.05). Employing the experimental nano-filled sealant, laser fluorescence measurements for caries detection can be performed through thicker sealant layers compared to conventional sealant materials. Thus, it might be possible to use this material to assess a caries progression underneath the sealant and administer an appropriate therapy in due time.

[Fissures in biliary calculi. Personal contribution (author's transl)].

PubMed

Nano, M; Potenzoni, F; Camandona, M; Casalegno, P A

1979-04-01

In a series of 70 patients suffering from biliary lithiasis, the roentgenologic findings of fissures in the calculi was observed in 5 cases examined by means of cholecystography and in 7 cases who underwent cholangiocholecystography. Fissures were demonstrated 11 times in calculi after surgery. The "Mercedes-Benz" sign was never observed at the abdominal examination without contrast medium. The presence of fissures may be an additional sign in the radiologic diagnosis of biliary calculi, but its value is not determinant.

Randomized clinical trial of transcutaneous electrical posterior tibial nerve stimulation versus lateral internal sphincterotomy for treatment of chronic anal fissure.

PubMed

Youssef, Tamer; Youssef, Mohamed; Thabet, Waleed; Lotfy, Ahmed; Shaat, Reham; Abd-Elrazek, Eman; Farid, Mohamed

2015-10-01

The objective of this study was to evaluate the efficacy of transcutaneous electrical posterior tibial nerve stimulation in treatment of patients with chronic anal fissure and to compare it with the conventional lateral internal sphincterotomy. Consecutive patients with chronic anal fissure were randomly allocated into two treatment groups: transcutaneous electrical posterior tibial nerve stimulation group and lateral internal sphincterotomy group. The primary outcome measures were number of patients with clinical improvement and healed fissure. Secondary outcome measures were complications, VAS pain scores, Wexner's constipation and Peascatori anal incontinence scores, anorectal manometry, and quality of life index. Seventy-three patients were randomized into two groups of 36 patients who were subjected to transcutaneous electrical nerve stimulation and 37 patients who underwent lateral internal sphincterotomy. All (100%) patients in lateral internal sphincterotomy group had clinical improvement at one month following the procedure in contrast to 27 (75%) patients in transcutaneous electrical nerve stimulation group. Recurrence of anal fissure after one year was reported in one (2.7%) and 11 (40.7%) patients in lateral internal sphincterotomy and transcutaneous electrical nerve stimulation groups respectively. Resting anal pressure and functional anal canal length were significantly reduced after lateral internal sphincterotomy. Transcutaneous electrical posterior tibial nerve stimulation for treatment of chronic anal fissure is a novel, non-invasive procedure and has no complications. However, given the higher rate of clinical improvement and fissure healing and the lower rate of fissure recurrence, lateral internal sphincterotomy remains the gold standard for treating chronic anal fissure. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Maps showing water-level declines, land subsidence, and earth fissures in south-central Arizona

USGS Publications Warehouse

Laney, R.L.; Raymond, R.H.; Winikka, C.C.

1978-01-01

From 1915 to 1975, more than 109 million acre-feet of ground water was withdrawn from about 4,500 square miles in Pinal and Maricopa Counties in south-central Arizona. The volume of water withdrawn greatly exceeds the volume of natural recharge, and water levels have been declining since 1923. As a result of the water-level declines, the land surface has subsided, the alluvial deposits have been subjected to stress, and earth fissures have developed. Land subsidence and earth fissures have damaged public and private properties. Subsidence and fissures will continue to occur as long as ground water is being mined and water levels continue to decline. As urban development expands, land subsidence and earth fissures will have an increasing socioeconomic impact. Information on maps includes change in water levels, measurements of land subsidence, and location of earth fissures. A section showing land subsidence between Casa Grande and the Picacho Peak Interchange also is included. Scale 1:250,000. (Woodard-USGS)

The immediate and long-term effects of invasive and noninvasive pit and fissure sealing techniques on the microflora in occlusal fissures of human teeth.

PubMed

Kramer, P F; Zelante, F; Simionato, M R

1993-01-01

The purpose of this study was to evaluate the effect of acid conditioning and occlusal sealant on microbial colonization of pit and fissures submitted to ameloplasty or left intact. Human enamel blocks containing fissures prepared from the occlusal surfaces of unerupted third molars were implanted in occlusal fillings in molars of 12 patients for seven, 30, 60, and 120 days. After seven days of exposure to the oral environment, the pit and fissure blocks were removed and found to be colonized, mainly with gram-positive coccal flora. The acid-etching procedure itself reduced the number of cultivable microorganisms by about 95%. Subsequent application of occlusal sealant caused a gradual decrease of the remaining viable microorganism throughout the experiment. Despite the decrease of 100% after acid etching in most of the fissures submitted to ameloplasty, the occlusal sealant did not lead to a subsequent significant reduction.

Assessing eruption column height in ancient flood basalt eruptions

NASA Astrophysics Data System (ADS)

Glaze, Lori S.; Self, Stephen; Schmidt, Anja; Hunter, Stephen J.

2017-01-01

A buoyant plume model is used to explore the ability of flood basalt eruptions to inject climate-relevant gases into the stratosphere. An example from the 1986 Izu-Oshima basaltic fissure eruption validates the model's ability to reproduce the observed maximum plume heights of 12-16 km above sea level, sustained above fire-fountains. The model predicts maximum plume heights of 13-17 km for source widths of between 4-16 m when 32% (by mass) of the erupted magma is fragmented and involved in the buoyant plume (effective volatile content of 6 wt%). Assuming that the Miocene-age Roza eruption (part of the Columbia River Basalt Group) sustained fire-fountains of similar height to Izu-Oshima (1.6 km above the vent), we show that the Roza eruption could have sustained buoyant ash and gas plumes that extended into the stratosphere at ∼ 45 ° N. Assuming 5 km long active fissure segments and 9000 Mt of SO2 released during explosive phases over a 10-15 year duration, the ∼ 180km of known Roza fissure length could have supported ∼36 explosive events/phases, each with a duration of 3-4 days. Each 5 km fissure segment could have emitted 62 Mt of SO2 per day into the stratosphere while actively fountaining, the equivalent of about three 1991 Mount Pinatubo eruptions per day. Each fissure segment could have had one to several vents, which subsequently produced lava without significant fountaining for a longer period within the decades-long eruption. Sensitivity of plume rise height to ancient atmospheric conditions is explored. Although eruptions in the Deccan Traps (∼ 66Ma) may have generated buoyant plumes that rose to altitudes in excess of 18 km, they may not have reached the stratosphere because the tropopause was substantially higher in the late Cretaceous. Our results indicate that some flood basalt eruptions, such as Roza, were capable of repeatedly injecting large masses of SO2 into the stratosphere. Thus sustained flood basalt eruptions could have influenced climate on time scales of decades to centuries but the location (i.e., latitude) of the province and relevant paleoclimate is important and must be considered.

Assessing Eruption Column Height in Ancient Flood Basalt Eruptions

NASA Technical Reports Server (NTRS)

Glaze, Lori S.; Self, Stephen; Schmidt, Anja; Hunter, Stephen J.

2015-01-01

A buoyant plume model is used to explore the ability of flood basalt eruptions to inject climate-relevant gases into the stratosphere. An example from the 1986 Izu-Oshima basaltic fissure eruption validates the model's ability to reproduce the observed maximum plume heights of 12-16 km above sea level, sustained above fire-fountains. The model predicts maximum plume heights of 13-17 km for source widths of between 4-16 m when 32% (by mass) of the erupted magma is fragmented and involved in the buoyant plume (effective volatile content of 6 wt%). Assuming that the Miocene-age Roza eruption (part of the Columbia River Basalt Group) sustained fire-fountains of similar height to Izu-Oshima (1.6 km above the vent), we show that the Roza eruption could have sustained buoyant ash and gas plumes that extended into the stratosphere at approximately 45 deg N. Assuming 5 km long active fissure segments and 9000 Mt of SO2 released during explosive phases over a 10-15 year duration, the approximately 180 km of known Roza fissure length could have supported approximately 36 explosive events/phases, each with a duration of 3-4 days. Each 5 km fissure segment could have emitted 62 Mt of SO2 per day into the stratosphere while actively fountaining, the equivalent of about three 1991 Mount Pinatubo eruptions per day. Each fissure segment could have had one to several vents, which subsequently produced lava without significant fountaining for a longer period within the decades-long eruption. Sensitivity of plume rise height to ancient atmospheric conditions is explored. Although eruptions in the Deccan Traps (approximately 66 Ma) may have generated buoyant plumes that rose to altitudes in excess of 18 km, they may not have reached the stratosphere because the tropopause was substantially higher in the late Cretaceous. Our results indicate that some flood basalt eruptions, such as Roza, were capable of repeatedly injecting large masses of SO2 into the stratosphere. Thus sustained flood basalt eruptions could have influenced climate on time scales of decades to centuries but the location (i.e., latitude) of the province and relevant paleoclimate is important and must be considered.

Ultrasound Fissure Observation: Assessment of Lung by Pleural-Hub Affiliates.

PubMed

Zanforlin, Alessandro; Livi, Vanina; Santoriello, Carlo; Ceruti, Paolo; Trigiani, Marco; Valerio, Manlio; Perani, Cristiano; Carlucci, Paolo; Palmiotti, Antonio; Marchetti, Giampietro

2018-02-22

Lung ultrasound examination is becoming an even more important part of pulmonologists' clinical routine. As indicated in the literature, the coordinates of any findings on lung parenchyma are based on surface landmarks or conventional quadrants. In our experience we have noticed that lung fissures are clearly detectable as interruptions of the pleural line, but this has never been investigated previously. The aim of this study was to evaluate whether lung fissures are detectable under normal conditions in routine clinical practice. Ten operators were enrolled from Pleural-Hub, a scientific discussion group. After compiling a prestudy survey to investigate whether they had observed fissures previously, they were asked to note if the following fissures were detectable: posterior right (PR) and left (PL), lateral right (LR) and left (LL), anterior right (AR), and anterolateral left (AL). Enrollment was competitive, aiming to reach 100 case subjects. We found that general fissure detection was 61.3%, in particular: PR, 59%; LR, 75%; AR, 69%; PL, 45%; LL, 64%; AL, 56%. Single operators yielded different detection rates ranging from 90% to 25%, showing strong operator dependency. Before being made aware of general results operators indicated operator's skill and rib shadow artifacts as the principal factors affecting fissure detection. Lung fissures may be detected with ultrasound once adequate training is provided. This may allow the clinician a more precise anatomical delineation of pathology identified by lung ultrasound. Copyright © 2018 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Fine Mapping and Introgressing a Fissure Resistance Locus

USDA-ARS?s Scientific Manuscript database

Rice (Oryza sativa L.) kernel fissuring is a major concern of both rice producers and millers. Fissures are small cracks in rice kernels that increase breakage among kernels when transported or milled, which decrease the value of processed rice. This study employed molecular gene tagging methods to ...

A Framework of Factors Influencing ANSA Decision Making (Structure des Facteurs Agissant sur le Processus Decisionel des Acteurs Armes non Etatiques)

DTIC Science & Technology

2010-12-01

Contractor was tasked to systematically identify and critically assess scientific literature of relevance to elaborating a theory of ANSA strategic decision...processus décisionnel des AANE et permettra de déterminer quand et comment intervenir afin d’arriver à des résultats plus positifs. Les auteurs ont fait...Jackson 2009) .................................... 13 List of tables Table 1 Theories of decision making

[Application of individually designed trans-fissure approach in brain surgery: analysis of 90 cases].

PubMed

Zhao, Ji-Zong; Wang, Shuo; Zhang, Mao-Zhi; Wang, Lei; Wang, Rong; Tang, Ya-Juan

2009-01-06

To explore the feasibility and value of trans-fissure approaches in brain surgery through individually designed craniotomy. Ninety patients with intracranial space-occupying lesions, 47 males and 58 females, aged (43 +/- 14) (1 - 68), were treated by individualized trans-fissure approach surgeries. Linear scalp incision or "horseshoe shape" scalp incision were designed to perform the operation, with a bone flap 3 - 4 cm in diameter. The shortest approach to reach the lesion was decided under the guidance of neuro-navigation and real-time B-mode ultrasonography. Then the lesions were removed through natural cortical fissures. Another 79 patients with intracranial space-occupying lesions, 53 males and 51 females, aged (42 +/- 11) (15 -73), undergoing classical surgeries in the same period were used as control group. The average operation time, size of bone flap, amount of blood loss, hospitalization time, and hospitalization cost were compared between these 2 groups. The operation time of the individually designed trans-fissure approach group was (3.1 +/- 1.6) hours (1.33 - 10.83 hours), significantly shorter than that of the control group [(4.8 +/- 1.9) hrs, P < 0.05]. The amount of blood loss of the individually designed trans-fissure approach group was (173 +/- 168) ml (20 m - 500 ml), significantly less than that of the control group [(410 +/- 61) ml, P < 0.01]. The size of bone flap of the individually designed trans-fissure approach group was (12 +/- 5) cm2 [(1 - 25) cm2], significantly smaller than that of the control group [(20. +/- 9) cm2, P < 0.01]. Four of the 90 patients of the individually designed trans-fissure approach group received retransfusion, compared to 15 in the control group, during operation. No infection or other significant complications occurred after operation in the individually designed trans-fissure approach group. The hospitalization time of the individually designed trans-fissure approach group was (20 +/- 6) days (9 - 39 days), significantly shorter than that of the control group [(24 +/- 7) days, P < 0.01]. The average hospitalization cost of the individually designed trans-fissure approach group was (23171 +/- 7280) yuan RMB; significantly lower than that of the control group [(28096 +/- 10822) yuan, P < 0.01]. One of the land markers of minimally invasive neurosurgery, individualized trans-fissure approach has been proved to be an effective minimally invasive approach that leads to better outcome and fewer complications after operation.

Etude du processus de changement vecu par des familles ayant decide d'adopter volontairement des comportements d'attenuation des changements climatiques

NASA Astrophysics Data System (ADS)

Leger, Michel T.

Les activites humaines energivores telles l'utilisation intensive de l'automobile, la surconsommation de biens et l'usage excessif d'electricite contribuent aux changements climatiques et autres problemes environnementaux. Bien que plusieurs recherches rapportent que l'etre humain est de plus en plus conscient de ses impacts sur le climat de la planete, ces memes recherches indiquent qu'en general, les gens continuent a se comporter de facon non ecologique. Que ce soit a l'ecole ou dans la communaute, plusieurs chercheurs en education relative a l'environnement estiment qu'une personne bien intentionnee est capable d'adopter des comportements plus respectueux de l'environnement. Le but de cette these etait de comprendre le processus d'integration de comportements d'attenuation des changements climatiques dans des familles. A cette fin, nous nous sommes fixe deux objectifs : 1) decrire les competences et les procedes qui favorisent l'adoption de comportements d'attenuation des changements climatiques dans des familles et 2) decrire les facteurs et les dynamiques familiales qui facilitent et limitent l'adoption de comportements d'attenuation des changements climatiques dans des familles. Des familles ont ete invitees a essayer des comportements personnels et collectifs d'attenuation des changements climatiques de sorte a integrer des modes de vie plus ecologiques. Sur une periode de huit mois, nous avons suivi leur experience de changement afin de mieux comprendre comment se produit le processus de changement dans des familles qui decident volontairement d'adopter des comportements d'attenuation des changements climatiques. Apres leur avoir fourni quelques connaissances de base sur les changements climatiques, nous avons observe le vecu de changement des familles durant huit mois d'essais a l'aide de journaux reflexifs, d'entretiens d'explicitation et du journal du chercheur. La these comporte trois articles scientifiques. Dans le premier article, nous presentons une recension des ecrits sur le changement de comportement en environnement. Nous explorons egalement la famille comme systeme fonctionnel de sorte a mieux comprendre ce contexte d'action environnementale qui est, a notre connaissance, peu etudie. Dans le deuxieme article, nous presentons nos resultats de recherche concernant les facteurs d'influence observes ainsi que les competences manifestees au cours du processus d'adoption de nouveaux comportements environnementaux dans trois familles. Enfin, le troisieme article presente les resultats du cas d'une quatrieme famille ou les membres vivent depuis longtemps des modes de vie ecologique. Dans le cadre d'une demarche d'analyse par theorisation ancree, l'etude de ce cas modele nous a permis d'approfondir les categories conceptuelles identifiees dans le deuxieme article de sorte a produire une modelisation de l'integration de comportements environnementaux dans le contexte de la famille. Les conclusions degagees grace a la recension des ecrits nous ont permis d'identifier les elements qui pourraient influencer l'adoption de comportements environnementaux dans des familles. La recension a aussi permis une meilleure comprehension des divers facteurs qui peuvent affecter l'adoption de comportements environnementaux et, enfin, elle a permis de mieux cerner le phenomene de changement de comportement dans le contexte de la famille consideree comme un systeme. En appliquant un processus d'analyse inductif, a partir de nos donnees qualitatives, les resultats de notre etude multi-cas nous ont indique que deux construits conceptuels semblent influencer l'adoption de comportements environnementaux en famille : 1) les valeurs biospheriques communes au sein de la famille et 2) les competences collectivement mises a profit collectivement durant l'essai de nouveaux comportements environnementaux. Notre modelisation du processus de changement dans des familles indique aussi qu'une dynamique familiale collaborative et la presence d'un groupe de soutien exterieur sont deux elements conceptuels qui tendent a influencer les deux principaux construits et, par ce fait, tendent a augmenter les chances d'integrer de nouveaux comportements environnementaux dans des familles. En conclusion, nous presentons les limites de notre recherche ainsi que des pistes pour des recherches futures. Notamment, nous recommandons que l'ecole accueille les familles des eleves dans le cadre d'activites d'education a l'environnement ou les freres, les soeurs et les parents des eleves puissent apprendre ensemble, a l'ecole. Par exemple, nous recommandons la conduite en ERE d'une recherche action portant sur l'apprentissage intergenerationnel de nouveaux comportements dans le contexte de la famille. Mots-cles : education relative a l'environnement, comportement environnemental en famille, changement de comportement en famille, valeurs biospheriques, competences d'action.

Analyse numerique de la microplasticite aux joints de grains dans les polycristaux metalliques CFC

NASA Astrophysics Data System (ADS)

Andriamisandratra, Mamiandrianina

La rupture par fatigue concerne aujourd’hui encore beaucoup de pièces métalliques soumises en service à un chargement répétitif. À l’échelle de la microstructure, les joints de grains sont connus pour jouer un rôle important dans la tenue en fatigue du matériau grâce au durcissement qu’ils confèrent. Cependant les joints de grains eux-mêmes ou la zone à leur proximité ont souvent été identifiés comme lieux d’amorçage de fissures de fatigue, particulièrement dans le cas des métaux cubiques à faces centrées (CFC). Dans le but de caractériser le comportement micromécanique à proximité de différents types de joint de grain, le comportement à l’interface en traction monotone uniaxiale a été modélisé par la méthode des éléments finis et une loi de plasticité cristalline a été utilisée. De plus, quelques configurations cristallographiques bicristallines ont alors été simulées et leur comportement a été analysé sous un chargement de traction axiale monotone. Le cadre de validité de la modélisation a été restreint à celui des petites déformations (<5%). Quatre critères importants dictant le comportement mécanique cristallin ont été identifiés. Il s’agit de la rigidité élastique, du facteur de Schmid des deux systèmes de glissement les plus favorables, et enfin du ratio entre ces deux plus forts facteurs de Schmid traduisant la propension au glissement simple ou multiple. Des simulations de traction sur des monocristaux ont ainsi permis de comprendre l’influence propre de chaque critère sur le comportement macroscopique (contraintes et déformations) et microscopique (glissements cristallins). Les calculs bicristallins ont ensuite mis en évidence l’activation particulière de certains systèmes de glissement à priori non favorables au niveau du joint de grain. Ce phénomène a été associé avec la nécessité d’assurer la compatibilité mécanique de déformation de part et d’autre de l’interface. Le profil de la déformation dans le sens longitudinal de l’éprouvette a montré une baisse systématique de déformation au niveau du joint et dont l’intensité augmente avec la désorientation angulaire entre les deux grains. L’hétérogénéité de la déformation en chaque section de l’éprouvette est quant à elle surtout liée au caractère fortement anisotrope de la plasticité et s’avère plus prononcée lorsque le mode de déformation est assuré par un glissement simple. Enfin, un cas bicristallin qui présentait une compatibilité microscopique des traces de glissement dans le plan du joint de grain a été étudié. Cependant, aucune corrélation avec le profil de glissement n’a été relevée, une cause macroscopique étant plus vraisemblablement à l’origine du profil observé. Mots-clés: joints de grains, localisation, plasticité cristalline, éléments finis, bicristal.

Influence des macles sur le courant critique de transport selon c et sur la ligne d'irréversibilité dans les plans ab étudiée dans des échantillons monodomaines texturés d'YBaCuO

NASA Astrophysics Data System (ADS)

Sanfilippo, S.; Sulpice, A.; Bourgault, D.; Villard, C.; Gautier-Picard, P.; Chaud, X.; Beaugnon, E.; Tournier, R.

1998-02-01

Direct transport measurements at 77 K of the critical current density along the c-axis (J_c) and magnetic measurements are performed on the same bulk textured single domain YBaCuO samples with the longest dimension along the c-axis. A strong influence of the Twin Planes (TP) on J_c and on the ab-plane irreversibility line B(T^*) is reported when the field is rotated in the ab-planes perpendicularly to the c-axis. The different unusual behaviors observed for J_c and the B(T^*), depending on the range of temperature and field are explained by the strong influence of these extended correlated defects on the pinning of the flux lines. La densité de courant critique selon l'axe c (J_c) est mesurée à 77 K en transport et par des mesures magnétiques sur les mêmes échantillons texturés monodomaines d'YBaCuO. L'influence des plans de macles (TP) sur J_c et sur la ligne d'irréversibilité B(T^*) est étudiée en faisant tourner le champ dans les plans ab, perpendiculairement à l'axe c. Les résultats montrent que dans ces composés, J_c et B(T^*) sont fortement influencés par le piégeage par les TP. Divers comportements des lignes de flux résultant de l'influence de ces défauts corrélés sont proposés selon les gammes de température et de champ étudiées.

Prenatal diethylstilbestrol induces malformation of the external genitalia of male and female mice and persistent second-generation developmental abnormalities of the external genitalia in two mouse strains

PubMed Central

Mahawong, Phitsanu; Sinclair, Adriane; Li, Yi; Schlomer, Bruce; Rodriguez, Esequiel; Max, Ferretti M.; Liu, Baomei; Baskin, Laurence S.; Cunha, Gerald R.

2014-01-01

Potential trans-generational influence of diethylstilbestrol (DES) exposure emerged with reports of effects in grandchildren of DES-treated pregnant women and of reproductive tract tumors in offspring of mice exposed in utero to DES. Accordingly, we examined the trans-generational influence of DES on development of external genitalia (ExG) and compared effects of in utero DES exposure in CD-1 and C57BL/6 mice injected with oil or DES every other day from gestational days 12 to 18. Mice were examined at birth, and on 5 to 120 days postnatal to evaluate ExG malformations. Of 23 adult (≥60 days) prenatally DES-exposed males, features indicative of urethral meatal hypospadias (see text for definitions) ranged from 18 to 100% in prenatally DES-exposed CD-1 males and 31 to 100% in prenatally DES-exposed C57BL/6 males. Thus, the strains differed in the incidence of male urethral hypospadias. Ninety-one percent of DES-exposed CD-1 females and 100% of DES-exposed C57BL/6 females had urethral-vaginal fistula. All DES-exposed CD-1 and C57BL/6 females lacked an os clitoris. None of the prenatally oil-treated CD-1 and C57BL/6 male and female mice had ExG malformations. For the second-generation study, 10 adult CD-1 males and females, from oil- and DES-exposed groups, respectively, were paired with untreated CD-1 mice for 30 days, and their offspring evaluated for ExG malformations. None of the F1 DES-treated females were fertile. Nine of 10 prenatally DES-exposed CD-1 males sired offspring with untreated females, producing 55 male and 42 female pups. Of the F2 DES-lineage adult males, 20% had exposed urethral flaps, a criterion of urethral meatal hypospadias. Five of 42 (11.9%) F2 DES lineage females had urethral-vaginal fistula. In contrast, all F2 oil-lineage males and all oil-lineage females were normal. Thus, prenatal DES exposure induces malformations of ExG in both sexes and strains of mice, and certain malformations are transmitted to the second-generation. PMID:25449352

Transperineal sonographic anal sphincter complex evaluation in chronic anal fissures.

PubMed

Bedair, Elsaid M; El Hennawy, Hany M; Moustafa, Ahmed Abdu; Meki, Gad Youssef; Bosat, Bosat Elwany

2014-11-01

The purpose of this study was to assess the role of transperineal sonography in assessment of pathologic changes to the anal sphincter complex in patients with chronic anal fissures. We conducted a prospective case-control study of 100 consecutive patients of any age and both sexes with chronic anal fissures who presented to a colorectal clinic between January 2012 and August 2013 (group A) and 50 healthy volunteers (group B). The most common patterns of radiologic changes to anal sphincters associated with chronic anal fissures were circumferential thickening of the anal sphincter complex in 5 patients (5%), circumferential thickening of the internal anal sphincter in 3 patients (3%), preferential thickening of the internal anal sphincter at the 6-o'clock position in 80 patients (80%) and the 12-o'clock position in 7 patients (7%), preferential thickening of the internal and external anal sphincters in 3 patients (3%), and thinning of the internal anal sphincter in 2 patients (2%). Chronic anal fissures cause differential thickening of both internal and external anal sphincters, with a trend toward increased thickness in relation to the site of the fissure. Routine preoperative transperineal sonography for patients with chronic anal fissures is recommended, and it is mandatory in high-risk patients. © 2014 by the American Institute of Ultrasound in Medicine.

Treatment of anal fissures using a combination of minoxidil and lignocaine: a randomized, double-blind trial.

PubMed

Muthukumarassamy, Rajakannu; Robinson, Smile S; Sarath, Sistla Chandra; Raveendran, R

2005-01-01

Anal fissures are associated with hypertonia of the internal anal sphincter and pain. We evaluated the efficacy of local application of a combination of minoxidil and lignocaine in healing anal fissures. In this prospective, randomized, double-blind study, 90 patients with anal fissure were recruited. Patients received local applications of ointments containing 5% lignocaine (n=28), 0.5% minoxidil (n=36), or both (n=26). Healing of anal fissure at 6 weeks was used as the primary end-point. Rates of complete healing of fissure were similar in the three groups (lignocaine alone 8/27, minoxidil alone 10/34, combination 7/22; p=ns). Mean (SD) time taken for complete healing with combination treatment [1.9 (0.6) weeks] was significantly shorter than that with minoxidil alone (3.1 [1.7] weeks; p=0.001) or with lignocaine alone (3.3 [0.8] weeks; p=0.002). Rates of pain relief were similar in the three groups. Stoppage of bleeding occurred more often with combination treatment than with lignocaine alone. No patient had systemic or local side effects. Combination treatment with minoxidil and lignocaine helps in faster healing of anal fissures and provides better symptomatic relief than either drug alone.

Elaboration, microstructure, propriétés électriques et magnétiques de matériaux textures dans les systèmes Nd-Ce-Cu-O et Bi-Sr-Ca-Cu-O

NASA Astrophysics Data System (ADS)

Dhalenne, G.; Trouilleux, L.; Jegoudez, J.; Revcolevschi, A.; Monod, P.; Kormann, R.; Ganne, J. P.; Motohira, N.; Kitazawa, K.

1991-11-01

Superconducting textured materials were grown from the melt by a floating zone technique in the Nd-Ce-Cu-O and Bi-Sr-Ca-Cu-O systems. The influence of growth conditions and starting compositions on the microstructures and phase composition of the samples were studied by optical microscopy under polarized light, electron microprobe analysis and X-ray diffraction. The superconducting properties of these samples were examined by both electrical resistivity and magnetic measurements. A very strong influence of the microstructure on the superconducting properties as well as a magnetic and electrical anisotropy were shown. In the case of the Bi-Sr-Ca-Cu-O system, critical current densities ranging from 1 600 to 3 000 A.cm^{-2} were measured at 77 K. Des matériaux supraconducteurs texturés ont été élaborés à partir de l'état liquide dans les systèmes Nd-Ce-Cu-O et Bi-Sr-Ca-Cu-O par une technique de fusion de zone. L'influence des conditions de croissance et des compositions initiales sur la microstructure des échantillons a été étudiée par microscopie optique en lumière polarisée, microsonde électronique et diffraction des rayons X. Les propriétés supraconductrices des échantillons ont été examinées par des mesures électriques et magnétiques. Il a été observé une forte influence de la microstructure sur les propriétés supraconductrices ainsi qu'une anisotropie électrique et magnétique. Dans le cas du système Bi-Sr-Ca-Cu-O, les densités de courant critique mesurées à 77 K sont comprises entre 1 600 et 3 000 A.cm^{-2}.

Combustion of Solid Propellants (La Combustion des Propergols Solides)

DTIC Science & Technology

1991-07-01

cin~tiques initiales. Il relatives A Ia granulom ~trie ct la surface eat s~me possible dWaller plus loin et sp~cifique des catalyseurs existent, il est...grand nombro do vari~t~s granulom ~triques des proporgols. On pout ainsi observer uno mont donc utilis~es induatriellemont pour notte influence du temps...et do la ajuster la vitosso des vari~tds do tempdrature do laminage sur la diminution granulom ~trie moyenno 400, 200, 100, 10, 3 de l’exposant do

The prevalence of dental caries and fissure sealants in 12 year old children by disadvantaged status in Dublin (Ireland).

PubMed

Sagheri, D; McLoughlin, J; Clarkson, J J

2009-03-01

The aim was to record dental caries levels and the presence of fissure sealants in 12-year-old schoolchildren whose domestic water supply had been fluoridated since birth in Dublin (Ireland). Cross-sectional study. Participants A representative, random sample of 12-year-old schoolchildren in north-west Dublin. Dental caries levels were recorded using WHO criteria and fissure sealant was recorded when sealant was detectable on a permanent molar tooth. Medical card ownership, as a surrogate for disadvantage, was recorded by use of a questionnaire. Three-hundred and thirty-two (332) children were examined. The mean DMFT was 0.80 (SD 1.24). Analysis (Mann-Whitney U test) based on stratification of the sample according to medical-card status revealed no statistically significant difference between DMFT median scores of children of medical-card holders (i.e., social disadvantage background) and non medical-card holders (p-value = 0.23). However, the data revealed a social gradient in the presence of at least one fissure sealant. Approximately 10% more children in the group of medical-card holders had no fissure sealants present. Fisher's exact test was used to examine the association between the absence of fissure sealants and at least one fissure sealant between the two groups and was considered to be statistically significant (p-value = 0.04). This study demonstrated a social gradient in the presence of fissure sealants, but no such gradient in dental caries levels. This demonstrates the importance of population-based measures in the prevention of dental caries, such as water fluoridation, in reducing oral health inequalities.

Linear and Non-Linear Piezoresistance Coefficients in Cubic Semiconductors. I. Theoretical Formulations

NASA Astrophysics Data System (ADS)

Durand, S.; Tellier, C. R.

1996-02-01

This paper constitutes the first part of a work devoted to applications of piezoresistance effects in germanium and silicon semiconductors. In this part, emphasis is placed on a formal explanation of non-linear effects. We propose a brief phenomenological description based on the multi-valleys model of semiconductors before to adopt a macroscopic tensorial model from which general analytical expressions for primed non-linear piezoresistance coefficients are derived. Graphical representations of linear and non-linear piezoresistance coefficients allows us to characterize the influence of the two angles of cut and of directions of alignment. The second part will primarily deal with specific applications for piezoresistive sensors. Cette publication constitue la première partie d'un travail consacré aux applications des effets piézorésistifs dans les semiconducteurs germanium et silicium. Cette partie traite essentiellement de la modélisation des effets non-linéaires. Après une description phénoménologique à partir du modèle de bande des semiconducteurs nous développons un modèle tensoriel macroscopique et nous proposons des équations générales analytiques exprimant les coefficients piézorésistifs non-linéaires dans des repères tournés. Des représentations graphiques des variations des coefficients piézorésistifs linéaires et non-linéaires permettent une pré-caractérisation de l'influence des angles de coupes et des directions d'alignement avant l'étude d'applications spécifiques qui feront l'objet de la deuxième partie.

Preserving rice quality: fine mapping and introgressing a fissure resistance locus

USDA-ARS?s Scientific Manuscript database

Rice (Oryza sativa L.) kernel fissuring is a major concern of both rice producers and millers. Fissures are small cracks in the rice kernels that increase the percentage of breakage among the kernels when they are transported and milled, which decreases the value of processed rice. This study employ...

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Pit and fissure sealant and conditioner. 872.3765 Section 872.3765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... conditioner. (a) Identification. A pit and fissure sealant and conditioner is a device composed of resin, such...

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Pit and fissure sealant and conditioner. 872.3765 Section 872.3765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... conditioner. (a) Identification. A pit and fissure sealant and conditioner is a device composed of resin, such...

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Pit and fissure sealant and conditioner. 872.3765 Section 872.3765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3765 Pit and fissure sealant and...

Focal dilation and paradoxical collapse of cortical fissures and sulci in patients with normal-pressure hydrocephalus.

PubMed

Holodny, A I; George, A E; de Leon, M J; Golomb, J; Kalnin, A J; Cooper, P R

1998-11-01

The authors describe a subgroup of patients with shunt-proven normal-pressure hydrocephalus (NPH) who presented with focal fissural and sulcal dilation on imaging studies. The specific radiological features and methods of differentiating this condition from cortical atrophy are delineated. Normal-pressure hydrocephalus has been described as dilation of the ventricles that is out of proportion to the sulci. Sulcal dilation has been taken as evidence of cortical atrophy and has even been used as a criterion to exclude patients from undergoing a shunting procedure. The authors describe five cases of patients with shunt-proven NPH who presented with focal dilation of cortical fissures and sulci. In three of the cases, there was a paradoxical decrease in the size of the dilated fissures and sulci that paralleled the decrease in the size of the lateral ventricles following successful shunting. This study demonstrates that focal fissural and sulcal dilation may represent reservoirs of cerebrospinal fluid analogous to the ventricular system. Patients should not be denied a shunting procedure solely on the basis of focally dilated fissures of sulci.

Formability Extension of Aerospace Alloys for Tube Hydroforming Applications =

NASA Astrophysics Data System (ADS)

Anderson, Melissa

L'hydroformage de tube est un procede novateur de mise en forme du metal qui utilise la pression d'un fluide, generalement de l'eau, dans une matrice fermee pour deformer plastiquement des pieces d'epaisseur faible et fabriquer ainsi des composants tubulaires de geometries complexes. Ce procede possede de nombreux avantages tels que la reduction du poids des pieces, la diminution des couts lies a l'outillage et l'assemblage, la reduction du nombre d'etapes de fabrication et l'excellent etat de surface des pieces hydroformees. Cependant, malgre tous ces atouts, l'hydroformage reste un procede marginal dans le domaine aerospatial a cause de plusieurs facteurs dont la formabilite limitee des alliages aeronautiques. L'objectif principal de la recherche conduite dans le cadre de cette these est d'etudier une methode pour augmenter la formabilite de deux alliages aeronautiques designes par l'utilisation d'un procede de mise en forme multi-etapes qui inclue des cycles de mise en forme suivis d'etapes de traitement thermique intermediaires. Une revue de litterature exhaustive sur les methodes existantes pour ameliorer la formabilite des materiaux vises ainsi que les traitements thermiques d'adoucissement disponibles a permis d'etablir une procedure experimentale appropriee. Ce procede comprend plusieurs sequences de mise en forme suivie de traitement thermique successives jusqu'a l'obtention de la piece finale. L'insertion d'etapes de traitements thermiques intermediaires ainsi que la combinaison " deformation + traitement thermique " influencent le comportement mecanique et metallurgique des alliages. De ce fait, une caracterisation complete des materiaux a ete conduite a chaque etape du procede. D'un point de vue mecanique, l'effet des traitements thermiques et plus generalement du procede multi-etapes sur les proprietes mecaniques et lois constitutives des alliages a ete etudie en detail. Au niveau metallurgique, l'influence du procede sur les caracteristiques microstructurales des alliages tels la taille de grains, les phases en presence et la texture a ete analysee. Ces deux etudes paralleles ont permis de comprendre de facon complete et detaillee l'impact des modifications metallurgiques induites par le procede multietapes sur le comportement mecanique macroscopique et les proprietes finales de la piece.

Adaptive Management of Land Subsidence and Ground Fissuring in the Chino Groundwater Basin, California

NASA Astrophysics Data System (ADS)

Malone, A.; Rolfe, T.; Wildermuth, M.; Kavounas, P.

2014-12-01

The Chino Basin, located in southern California, is a large alluvial groundwater basin with storage in excess of five million acre-feet. The basin has a long history of groundwater development for various uses dating back to the early 1900s. As a result, piezometric heads declined basin-wide during the past century - in some areas by more than 200 feet. Declines of this magnitude typically cause irreversible aquifer-system compaction, which in turn results in subsidence at the ground surface. In portions of Chino Basin, land subsidence has been differential and accompanied by ground fissuring, which damaged existing infrastructure and poses concerns for new and existing development.Chino Basin Watermaster, the agency responsible for groundwater basin management, has recognized that land subsidence and ground fissuring should be minimized to the extent possible. At the same time, Watermaster is implementing aggressive groundwater-supply programs that include controlled overdraft and the possibility of causing head declines in areas prone to subsidence and fissuring. The groundwater-supply programs must also address the subsidence and fissuring phenomena.From 2001 to 2005, Watermaster conducted a technical investigation to characterize the extent, rate, and mechanisms of subsidence and fissuring. The investigation employed InSAR and ground-level surveying of benchmarks to monitor ground-surface deformation, and borehole extensometers and piezometric monitoring to establish the relationships between groundwater production, piezometric levels, and aquifer-system deformation. Based on the results of the investigation, Watermaster developed: (i) subsidence-management criteria for the areas experiencing acute subsidence and fissuring, and (ii) an adaptive management program to minimize the potential for future subsidence and fissuring across the entire Chino Basin. The science-based program includes ongoing monitoring, which now includes sophisticated fissure-monitoring techniques, data analysis, annual reporting, and adjustment to the program as warranted by the data.

Microhardness evaluation of enamel adjacent to an improved GIC sealant after different enamel pre-treatment procedures.

PubMed

Haznedaroglu, E; Sozkes, S; Mentes, A R

2014-12-01

This in vitro study was carried out to evaluate the microhardness of enamel adjacent to a glass ionomer cement (GIC) with high fluoride content used as a sealant (Fuji Triage, GC Corp., Japan) after laser, bur or air abrasion treatment procedures. 200 freshly extracted non-carious human molars were divided into 10 experimental groups according to the enamel pre-treatment method: A air abrasion (Mach 4.1 Kreativ Inc., USA); AP, Air abrasion + conditioning with 20% polyacrylic acid (GC cavity conditioner); L, Er,Cr:YSGG laser application (Waterlase, Biolase Technology, Inc., San Clemente, USA); LP, Er,Cr:YSGG laser application and fissure conditioning; B, ameloplasty carried out with a diamond bur especially designed for preparing fissures (Komet #8833); BP, ameloplasty + fissure conditioning; P, application of 20% polyacrylic acid and all fissures sealed with GIC; C, no fissure treatment, the material was applied directly to the fissures (control); R, application of 37% orthophosphoric acid and fissures sealed with a resin-based sealant (Fissurit; Voco, Germany) (control); N, no treatment (control). Half of each group of teeth were left in artificial saliva for one month and the rest for three months. The teeth were then sectioned and microhardness was measured using a Vickers test apparatus. Kruskal-Wallis, Mann-Whitney U and Dunn's multiple comparison tests were carried out (5% significance). After one month results regarding hardness at the base and lateral walls of fissures were significantly higher in groups A, AP, L, LP, B, BP, P and C than in groups R and N (p<0.01), but no difference was seen between the treatment procedures. The results after three months produced similar findings with evenly increased values for all groups. The results of this study showed that the tested GIC with a higher fluoride content seemed to improve the enamel hardness of the fissure enamel and could be regarded as an alternative material in cases where resin sealant applications are questionable.

[Influence of diethyl sulfate (DES) mutagenesis on growth properties and pigment secondary metabolites of Phellinus igniarius].

PubMed

Wang, Jing; Wu, Xin-yuan; Ma, Wei; Chen, Jing; Liu, Cheng; Wu, Xiu-li

2015-06-01

The diethyl sulfate (DES) mutagenesis was chosen for the mutagenic treatment to Phellinus igniarius, and the relationship of mutagenesis time and death rate was investigated with 0.5% DES. The differences of mycelial growth speed, liquid fermentation mycelia biomass, morphology and pigment classes of secondary metabolites production speed and antioxidant activities of metabolite products were discussed. The study displayed that DES mutagenesis could change mycelial morphology without obvious effect on mycelium growth, and the DES mutagenesis improved antioxidant activities of the active ingredients of P. igniarius and had more antioxidant activity of hypoxia/sugar PC12 nerve cells than that of P. igniarius.

Novel QTLs affecting rice kernel fissure resistance discovered in the cultivar ‘Saber’ augment those from ‘Cybonnet’

USDA-ARS?s Scientific Manuscript database

Kernel fissures in rice (Oryza sativa L.) caused by pre- or post-harvest stresses are the leading cause of breakage among milled rice. Such breakage causes economic losses for producers, millers, and marketers. Five QTLs for kernel fissure resistance (FR) were identified among a set of 275 RILs de...

Fine mapping and introgressing qFIS1-2, a major QTL for kernel fissure resistance in rice (Oryza sativa L.)

USDA-ARS?s Scientific Manuscript database

Rice (Oryza sativa L.) kernel fissuring increases breakage during milling and decreases the value of processed rice. This study employed molecular gene tagging methods to fine-map a fissure resistance (FR) locus in ‘Cybonnet’, a semidwarf tropical japonica cultivar, as well as transfer this trait to...

Influence of etching time and bonding strategies on the microshear bond strength of self- and light-cured pit-and-fissure sealants.

PubMed

Souza-Junior, Eduardo José; Borges, Boniek Castillo Dutra; Montes, Marcos Antônio Japiassú Resende; Alonso, Roberta Caroline Bruschi; Ambrosano, Glaucia Maria Bovi; Sinhoreti, Mário Alexandre Coelho

2012-01-01

This study evaluated the impact of extended etching and bonding strategies on the microshear bond strength of three sealant materials. Two pit-and-fissure sealants [FluroShield, Dentsply (light-cured) and AlphaSeal, DFL (self-cured)] and one light-cured flowable composite resin (Permaflo, Ultradent) were evaluated according to different enamel etching times (15 s or 30 s) and bonding procedures (no adhesive application, application of primer/hydrophobic resin or hydrophobic resin only). Intact enamel blocks were obtained from bovine teeth and sealed via the tested protocols. After 24 h, the microshear bond strength test was performed in a universal testing machine at a crosshead speed of 0.5 mm/min. Failure modes were classified by stereomicroscopy. Data were submitted to a three-way ANOVA and to Tukey's test (α=0.05). There was no statistically significant difference (p>0.05) among the materials. Permaflo showed higher bond strength when etched for 30 s alone. Enamel overetching decreased the bond strength of the light-cured sealant. Primer/bond previous treatment improved bond performance for AlphaSeal. In conclusion, from the tested conditions, all sealant materials presented similar bond strength values in relation to bonding protocol and etching time. The flowable composite can be used as a pit-and-fissure sealant. The use of a three-step adhesive system was essential for the self-cured sealant application.

Haemorrhoids and anal fissures during pregnancy and after childbirth: a prospective cohort study.

PubMed

Poskus, T; Buzinskienė, D; Drasutiene, G; Samalavicius, N E; Barkus, A; Barisauskiene, A; Tutkuviene, J; Sakalauskaite, I; Drasutis, J; Jasulaitis, A; Jakaitiene, A

2014-12-01

To identify the incidence and risk factors of haemorrhoids and fissures during pregnancy and after childbirth. Prospective observational cohort study. University hospital and outpatient clinics in Lithuania. A total of 280 pregnant women followed up until 1 month after delivery. Women were examined four times through pregnancy and after delivery; those that developed peri-anal diseases were compared with those that did not. Incidence, time and risk factors of haemorrhoids and fissures. In all, 123 (43.9%) women developed peri-anal disease: 1.6% in the first trimester, 61% during the third trimester, 34.1% after delivery and 3.3% 1 month after delivery; 114 (40.7%) women were diagnosed with haemorrhoids, seven (2.5%) with haemorrhoids and anal fissure and two (0.71%) with anal fissure. Ninety-nine (80.5%) women had vaginal delivery and 24 (19.5%) women had undergone caesarean section. Multivariate analysis identified personal history of peri-anal diseases (odds ratio [OR] 11.93; 95% confidence interval [95% CI] 2.18-65.30), constipation (OR 18.98; 95% CI 7.13-50.54), straining during delivery for more than 20 minutes (OR 29.75; 95% CI 4.00-221.23) and birthweight of newborn>3800 g (OR 17.99; 95% CI 3.29-98.49) as significant predictors of haemorrhoids and anal fissures during pregnancy and perinatal period. Haemorrhoids and fissures are common during the last trimester of pregnancy and 1 month after delivery, with constipation, personal history of haemorrhoids or fissures, birthweight of newborn>3800 g, straining during delivery for more than 20 minutes being independently associated risk factors. © 2014 Royal College of Obstetricians and Gynaecologists.

Influence du comportement des accompagnants sur le vécu des patients admis pour hémorragies digestives hautes au CHU campus de Lomé (Togo)

PubMed Central

Bagny, Aklesso; Dusabe, Angelique; Bouglouga, Oumboma; Lawson-ananisoh, Mawuli Late; Kaaga, Yeba Laconi; Djibril, Mohaman Awalou; Soedje, Kokou Mensah; Dassa, Simliwa Kolou; Redah, Datouda

2014-01-01

Introduction L'hémorragie digestive haute est une urgence, qui constitue souvent pour les patients un danger mortel suscitant inquiétude et agitation. Dans cet état, le patient dépend de ses accompagnants pour ses soins et pour honorer le traitement; mais souvent, il a été observé une discordance entre l'urgence et les comportements des accompagnants. Le but de cette étude était de décrire les facteurs socioéconomiques et psychologiques pouvant influencer les comportements des accompagnants des patients admis pour HDH, estimer l'indice de relation entre ces comportements et les facteurs associés d'une part et le vécu des patients admis pour HDH d'autre part. Méthodes Il s'agit d'une étude prospective menée de Septembre 2010 à Juin 2011 (soit 10 mois). Nous avions utilisé l'entretien semi-dirigé et l'observation directe pour collecter nos données, ces dernières avaient été traitées par les méthodes statistiques et d'analyse de contenu. Résultats Dans la présente étude, les comportements des accompagnants des patients admis pour HDH sont en majorité marqués par l'abandon (84%) et le manque de sollicitude (80,2%). Ces comportements sont souvent stimulés par les facteurs socioéconomiques tels que les difficultés économiques (83,2%), des conflits intrafamiliaux (85,1%) et des représentations (maladie incurable ou envoûtement) de la maladie par les accompagnants (73,3%) des cas. Quant aux patients, ils vivent ces comportements comme étant des menaces de mort ou des rejets (77,20%) et comme étant une dévalorisation ou une humiliation de la part de leurs accompagnants (70,30%). Les résultats confirment l'existence de lien significatif entre les comportements des accompagnants et les facteurs socio économiques, entre les comportements des accompagnants et des facteurs psychologiques, et entre le vécu des patients admis pour l'HDH et les comportements des accompagnants. Conclusion Des études ultérieures devraient aborder les points non touchés dans cette étude. Certes, elle a apporté un plus dans la compréhension du vécu des patients admis pour HDH et des comportements de leurs accompagnants. Cependant, elle est loin d'avoir épuisé les différents contours de la problématique de la présente étude. PMID:25848453

Caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques (LPIM) =

NASA Astrophysics Data System (ADS)

Fareh, Fouad

Le moulage par injection basse pression des poudres metalliques est une technique de fabrication qui permet de fabriquer des pieces possedant la complexite des pieces coulees mais avec les proprietes mecaniques des pieces corroyees. Cependant, l'optimisation des etapes de deliantage et de frittage a ete jusqu'a maintenant effectuee a l'aide de melange pour lesquels la moulabilite optimale n'a pas encore ete demontree. Ainsi, la comprehension des proprietes rheologiques et de la segregation des melanges est tres limitee et cela presente le point faible du processus de LPIM. L'objectif de ce projet de recherche etait de caracteriser l'influence des liants sur le comportement rheologique des melanges en mesurant la viscosite et la segregation des melanges faible viscosite utilises dans le procede LPIM. Afin d'atteindre cet objectif, des essais rheologiques et thermogravimetriques ont ete conduits sur 12 melanges. Ces melanges ont ete prepares a base de poudre d'Inconel 718 de forme spherique (chargement solide constant a 60%) et de cires, d'agents surfactants ou epaississants. Les essais rheologiques ont ete utilises entre autre pour calculer l'indice d'injectabilite ?STV des melanges, tandis que les essais thermogravimetriques ont permis d'evaluer precisement la segregation des poudres dans les melanges. Il a ete demontre que les trois (3) melanges contenant de la cire de paraffine et de l'acide stearique presentent des indices alpha STV plus eleves qui sont avantageux pour le moulage par injection des poudres metalliques (MIM), mais segregent beaucoup trop pour que la piece fabriquee produise de bonnes caracteristiques mecaniques. A l'oppose, le melange contenant de la cire de paraffine et de l'ethylene-vinyle acetate ainsi que le melange contenant seulement de la cire de carnauba segregent peu voire pas du tout, mais possedent de tres faibles indices alphaSTV : ils sont donc difficilement injectables. Le meilleur compromis semble donc etre les melanges contenant de la cire (de paraffine, d'abeille et de carnauba) et de faible teneur en acide stearique et en ethylene-vinyle acetate. Par ailleurs, les lois physiques preexistantes ont permis de confirmer les resultats des essais rheologiques et thermogravimetriques, mais aussi de mettre en evidence l'influence de la segregation sur les proprietes rheologiques des melanges. Ces essais ont aussi montre l'effet de constituants de liant et du temps passe a l'etat fondu sur l'intensite de la segregation dans les melanges. Les melanges contenants de l'acide stearique segregent rapidement. La caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques doit etre obtenue a l'aide d'une methode de courte duree pour eviter la segregation et de mesurer precisement l'aptitude a l'ecoulement de ces melanges.

The pattern of circumferential and radial eruptive fissures on the volcanoes of Fernandina and Isabela islands, Galapagos

USGS Publications Warehouse

Chadwick, W.W.; Howard, K.A.

1991-01-01

Maps of the eruptive vents on the active shield volcanoes of Fernandina and Isabela islands, Galapagos, made from aerial photographs, display a distinctive pattern that consists of circumferential eruptive fissures around the summit calderas and radial fissures lower on the flanks. On some volcano flanks either circumferential or radial eruptions have been dominant in recent time. The location of circumferential vents outside the calderas is independent of caldera-related normal faults. The eruptive fissures are the surface expression of dike emplacement, and the dike orientations are interpreted to be controlled by the state of stress in the volcano. Very few subaerial volcanoes display a pattern of fissures similar to that of the Galapagos volcanoes. Some seamounts and shield volcanoes on Mars morphologically resemble the Galapagos volcanoes, but more specific evidence is needed to determine if they also share common structure and eruptive style. ?? 1991 Springer-Verlag.

Virtual scanning tunneling microscopy: A local spectroscopic probe of two-dimensional electron systems

NASA Astrophysics Data System (ADS)

Sciambi, A.; Pelliccione, M.; Bank, S. R.; Gossard, A. C.; Goldhaber-Gordon, D.

2010-09-01

We propose a probe technique capable of performing local low-temperature spectroscopy on a two-dimensional electron system (2DES) in a semiconductor heterostructure. Motivated by predicted spatially-structured electron phases, the probe uses a charged metal tip to induce electrons to tunnel locally, directly below the tip, from a "probe" 2DES to a "subject" 2DES of interest. We test this concept with large-area (nonscanning) tunneling measurements, and predict a high spatial resolution and spectroscopic capability, with minimal influence on the physics in the subject 2DES.

The effects of dietary biotin supplementation on vertical fissures of the claw wall in beef cattle.

PubMed Central

Campbell, J R; Greenough, P R; Petrie, L

2000-01-01

A clinical field trial was performed on a herd of Hereford beef cows in central Saskatchewan. The herd had a history of being severely affected with vertical fissures. The objective of the study was to determine the effects of supplemental dietary biotin on the prevalence of vertical fissures in beef cows. In June 1994 and June 1995, 1- and 2-year-old heifers were randomly allocated into 2 treatment groups, each composed of 79 animals. One group received a 10 mg/head/day biotin-supplemented free-choice mineral supplement, while the other groups received an identical free-choice mineral without the biotin supplementation. The claws from these animals were evaluated in June 1994, October 1994, June 1995, October 1995, and June 1996 for the presence of vertical fissures. Supplemental dietary biotin significantly increased serum levels of biotin and significantly increased claw hardness in supplemented cows. Both groups of heifers started the trial without vertical fissures. After 18 months, 15% of the cows fed supplemental dietary biotin had vertical fissures compared with 33% in the nonsupplemented group. The difference was statistically significant (P = 0.01). PMID:10992986

Robust pulmonary lobe segmentation against incomplete fissures

NASA Astrophysics Data System (ADS)

Gu, Suicheng; Zheng, Qingfeng; Siegfried, Jill; Pu, Jiantao

2012-03-01

As important anatomical landmarks of the human lung, accurate lobe segmentation may be useful for characterizing specific lung diseases (e.g., inflammatory, granulomatous, and neoplastic diseases). A number of investigations showed that pulmonary fissures were often incomplete in image depiction, thereby leading to the computerized identification of individual lobes a challenging task. Our purpose is to develop a fully automated algorithm for accurate identification of individual lobes regardless of the integrity of pulmonary fissures. The underlying idea of the developed lobe segmentation scheme is to use piecewise planes to approximate the detected fissures. After a rotation and a global smoothing, a number of small planes were fitted using local fissures points. The local surfaces are finally combined for lobe segmentation using a quadratic B-spline weighting strategy to assure that the segmentation is smooth. The performance of the developed scheme was assessed by comparing with a manually created reference standard on a dataset of 30 lung CT examinations. These examinations covered a number of lung diseases and were selected from a large chronic obstructive pulmonary disease (COPD) dataset. The results indicate that our scheme of lobe segmentation is efficient and accurate against incomplete fissures.

Evaluation of Relationship between Obsessive-compulsive Disorder and Dissociative Experiences.

PubMed

Tatlı, Mustafa; Cetinkaya, Ozlem; Maner, Fulya

2018-05-31

The aim of the study is to evaluate the relationship between obsessive-compulsive disorder (OCD) symptoms and dissociative experiences and the effect of childhood traumatic experiences on this relationship in OCD patients. Fifty consecutive OCD patients and 50 healthy controls are enrolled for this study. Sociodemographic and Clinical Data Form, Dissociative Experiences Scale (DES), Padua Inventory (PI) and Childhood Trauma Questionnaire (CTQ) are applied to participants. Average DES total score in the patient group is 20.58 and in the control group it is 4.87. In the patient group, when we evaluate the relation strengths of DES total and subscale scores with PI total score, we found out that amnesia subscale has r=0.361 ( p <0.01), absorption subscale has r=0.611 ( p <0.01), depersonalization/derealization subscale has r=0.574 ( p <0.01), and DES total score has r=0.55 ( p <0.01) relation strengths with PI total score. In patient group both DES total score and CTQ total score have influence on PI total score independently from each other. In addition to this, the level of the influence of DES total scores on PI total scores is, R²=0.399 ( p <0.01) and the level of the influence of CTQ total scores on PI total scores is R²=0.343 ( p <0.01). Dissociative experiences are seen more frequently in OCD patients than healthy controls. Among dissociative experiences, absorption has stronger relation with OCD symptoms. The relation between OCD and dissociation is independent from and stronger than the relation between childhood traumatic experiences and OCD.

Differential compaction mechanism for earth fissures near Casa Grande, Arizona.

USGS Publications Warehouse

Jachens, R.C.; Holzer, T.L.

1982-01-01

Precise gravity measurements indicate that earth fissures or tension cracks caused by ground-water withdrawal within a 10km2 area SE of Casa Grande are associated with relief on the buried interface between the alluvial aquifer and underlying bedrock. These relations suggest that the fissures are forming in response to localized differential compaction caused by localized variations of aquifer-system thickness. -from Authors

Radiological anatomy assessment of the fissura pterygomaxillaris for a surgical approach to ganglion pterygopalatinum.

PubMed

Puche-Torres, Miguel; Blasco-Serra, Arantxa; Campos-Peláez, Ana; Valverde-Navarro, Alfonso A

2017-12-01

The ganglion pterygopalatinum has become a therapeutic target to treat various pain syndromes in recent years. It is located in the fossa pterygopalatina, and the fissura pterygomaxillaris is the main access to surgically approach this structure. Recently, the neuromodulation of the ganglion pterygopalatinum by microstimulator implantation has become the first therapeutic line in refractory cluster headache treatment. This invasive technique is performed transorally through the fissura pterygomaxillaris, and is limited by the size of the implantation device, which requires an opening of at least 2 mm. Therefore, extensive knowledge about the anatomy of the fissura pterygomaxillaris prior to surgery is necessary to predict the success of both the approach and intervention. Likewise, establishing a morphological typology of the different fissura pterygomaxillaris variations would be a valuable predictive tool in the clinical practice. In this work, an anatomical analysis was performed of the morphological characteristics of the 242 fissurae pterygomaxillares, which corresponded to 121 adult patients, 58 males and 63 females, aged between 18 and 87 years. For each subject, right and left fissures were studied with radiological computed tomography images. Aperture fissura pterygomaxillaris measurements were taken in an upper (Measure A), middle (Measure B) and lower craneo-caudal third (Measure C). Intra-subject differences were studied between the measurements taken of each patient's right and left fissures, and the inter-subject measures in which fissures were compared according to patients' age and gender. The obtained results showed no significant differences between each patient's right and left fissures in any three measurements taken. Intra-subject differences were not significant for gender or age. No statistically significant differences were found for the inter-subject measures between the measures of fissures according to patients' age. However, our data revealed that males' fissurae pterygomaxillares were significantly larger than those of females in all three measures. Having analysed fissures, a typological classification was made according to the morphological patterns found. A 2-mm limiting measure was considered, and Measures A, B and C of each fissure were classified depending on whether they had a value above or equal to 2 mm, or below 2 mm. With this classification criterion, four fissurae pterygomaxillares types were obtained. Type I and II fissure values (with a higher prevalence) were equal to or were greater than 2 mm in all three measures, or in two measures. Type III fissure values were only greater than or equal to 2 mm in Measure A, whereas all the Type IV fissure values were below 2 mm. Future studies are necessary to correlate the fissure types successfully proposed in the surgical ganglion pterygopalatinum approach. © 2017 Anatomical Society.

The flow mechanism in the Chalk based on radio-isotope analyses of groundwater in the London Basin

USGS Publications Warehouse

Downing, R.A.; Pearson, F.J.; Smith, D.B.

1979-01-01

14C analyses of groundwaters from the Chalk of the London Basin are re-interpreted and the age of the groundwater is revised. Radio-isotope analyses are used to examine the flow mechanism in the aquifer. The evidence supports the view that a network of micro-fissures and larger intergranular pores in the matrix provides a significant part of the water pumped from Chalk wells and the major fissures distribute the water to the wells. Most of the matrix is fine-grained and contains a very old water. This diffuses into the micro-fissures and larger pores and is carried to the wells by the major fissures. ?? 1979.

Fundal variations in the eyes of the osteoglossomorph fishes.

PubMed

Saidel, W M; Braford, M R

1985-01-01

The appearance of the fundus of the eye varies among the families of osteoglossomorph teleosts. In this study, four different fundal patterns were observed: (i) an anteroposterior (or horizontal) embryonic fissure with a septal falciform process (family Osteoglossidae); (ii) an embryonic fissure from the optic disc nasoventrally with a falciform process (family Arapaimidae); (iii) an embryonic fissure nasoventrally from the optic disc without a falciform process (family Hiodontidae); and (iv) neither an embryonic fissure nor a falciform process (families Notopteridae and Mormyridae). The distribution of these various forms among the osteoglossomorph fishes is consistent with the recent cladogram for the Osteoglossomorpha [Lauder and Liem, 1983] which was based on many characters. The embryonic fissure in adult Amia calva was also examined. Its existence in adult Amia, in most Osteoglossomorpha, and in many non-euteleostean bony fishes suggests that its persistence in the adult stage is a primitive trait of bony fishes, and its absence in the Notopteroidei (with the exception of Hiodon) is a derived condition.

Natural Treatments for Fissure in Ano Used by Traditional Persian Scholars, Razi (Rhazes) and Ibn Sina (Avicenna)

PubMed Central

Derakhshan, Ali Reza

2016-01-01

Most cases of chronic fissure do not respond to medical treatment. Razi and Ibn Sina were 2 of the best-known scientists of ancient Persia. The purpose of this study was to find out new scientific evidence in modern medicine about their recommendations, in order to find certain clues to conduct useful researches in the future. First, treatments of anal fissure mentioned by Razi and Ibn Sina were reviewed. Then, literature search was made in electronic databases including PubMed, Scopus, and Google Scholar. Management of anal fissure according to Razi’s and Ibn Sina’s practices is done based on 3 interventions: lifestyle modifications, drug treatments, and manual procedures. Almost all remedies suggested by Razi and Ibn Sina have shown their effects on fissure in ano via several mechanisms of action in many in vitro and in vivo studies; Still there is lack of human studies on the subject. PMID:27279645

Microleakage and penetration depth of different fissure sealant materials after cyclic thermo-mechanic and brushing simulation.

PubMed

Hatirli, Hüseyin; Yasa, Bilal; Yasa, Elif

2018-01-30

The aim of the study was to evaluate microleakage and the penetration-depths of different fissure-sealant materials applied with/without enameloplasty after cyclic aging. One-hundred-sixty mandibular molars were divided into non-invasive and enameloplasty preparation groups and eight material subgroups, including: flowable composites (microhyrid, nanohybrid, and nanofilled), three resin-based (unfilled, filled, and highly-filled), a giomer-based, and a glass-ionomer-based fissure sealant. Specimens were subjected to two-year cyclic chewing and brushing simulation. After 5% basic-fuchsin dye penetration, specimens were sectioned and scored under stereomicroscope. Kruskal-Wallis statistical data showed that preparation type significantly affected the penetration of all tested materials (p<0.05), but not significantly affected microleakage (p>0.05). Flowable composites showed the best and the glass-ionomer-based sealant showed the worst penetration and microleakage. Slight preparation of fissures is not important in microleakage. However, enameloplasty significantly enhanced the depth of penetration of the sealants. Flowable composites offer promising results at the fissure sealing.

Natural Treatments for Fissure in Ano Used by Traditional Persian Scholars, Razi (Rhazes) and Ibn Sina (Avicenna).

PubMed

Derakhshan, Ali Reza

2016-06-08

Most cases of chronic fissure do not respond to medical treatment. Razi and Ibn Sina were 2 of the best-known scientists of ancient Persia. The purpose of this study was to find out new scientific evidence in modern medicine about their recommendations, in order to find certain clues to conduct useful researches in the future. First, treatments of anal fissure mentioned by Razi and Ibn Sina were reviewed. Then, literature search was made in electronic databases including PubMed, Scopus, and Google Scholar. Management of anal fissure according to Razi's and Ibn Sina's practices is done based on 3 interventions: lifestyle modifications, drug treatments, and manual procedures. Almost all remedies suggested by Razi and Ibn Sina have shown their effects on fissure in ano via several mechanisms of action in many in vitro and in vivo studies; Still there is lack of human studies on the subject. © The Author(s) 2016.

Deformation at longyao ground fissure and its surroundings, north China plain, revealed by ALOS PALSAR PS-InSAR

NASA Astrophysics Data System (ADS)

Yang, Chengsheng; Lu, Zhong; Zhang, Qin; Zhao, Chaoying; Peng, Jianbing; Ji, Lingyun

2018-05-01

The Longyao ground fissure (LGF) is the longest and most active among more than 1000 ground fissures on the North China Plain. There have been many studies on the formation mechanism of the LGF, due to its scientific importance and its potential for damage to the environment. These studies have been based on both regional tectonic analysis and numerical simulations. In order to provide a better understanding of the formation mechanism, the deformation of the crack and its surrounding environment should be taken into consideration. In this paper, PS-InSAR technology was employed to assess the ground deformation of LGF and its surrounding area, using L-band ALOS-1 PALSAR images from 2007 to 2011. The characteristics of ground deformation, relationships between fissure activity and surrounding faults and groundwater exploitation were analyzed. This study shows that the north side of Longyao fault (LF) is uplifting while the south side is subsiding. This provides the tectonic conditions responsible for the activity of the ground fissure. Local groundwater exploitation also plays an important role in the development of ground fissures. InSAR observations were modeled to infer the loading depth (-2.8 km) and the slip rate (31.1 mm/yr) of LF.

Crustal flushing and its relationship to magnetic and hydrothermal processes on the East Pacific Rise crest

NASA Technical Reports Server (NTRS)

Wright, Dawn J.; Haymon, Rachel M.; Fornari, Daniel J.

1995-01-01

The deep-towed Argo I optical/acoustical vehicle and a geographic information system (GIS) have been used to establish the abundance, widths, and spatial distribution of fissures, as well as the relative age distribution of lavas along the narrow (less than 500 m wide) axial zone of the East Pacific Rise (EPR) from 9 deg 12 min to 9 deg 54 min N. On a second-order scale (approximately 78 km long), wider but less numerous fissures are found in the northern portion of the survey area; this changes to narrower, more abundant fissures in the south. A profile of the cumulative width added by fissures to the axial zone exhibits minima in three areas along strike (near 9 deg 49 min, 9 deg 35 min, and 9 deg 15 min N), where the most recent eruptions have occurred above sites of magmatic injection from the upper mantle, filling and covering older fissures. On a fourth-order scale (5-15 km long) the mean density of fissuring on a given segment is greater where relative axial lava age is greater. Fissure density also correlates with hydrothermal vent abundance and type. Increased cracking toward segment tips is observed at the second-order scale, whereas fourth-order segments tend to be more cracked in the middle. Cracking on a fourth-order scale may be driven by the propagation of dikes, rather than by the far-field plate stresses. The above relations constrain the model of Haymon et al. (1991) in which individual fourth-order segments are in different phases of a volcanic-hydrothermal-tectonic cycle.

Monitoring of land subsidence and ground fissures in Xian, China 2005-2006: Mapped by sar Interferometry

USGS Publications Warehouse

Zhao, C.Y.; Zhang, Q.; Ding, X.-L.; Lu, Z.; Yang, C.S.; Qi, X.M.

2009-01-01

The City of Xian, China, has been experiencing significant land subsidence and ground fissure activities since 1960s, which have brought various severe geohazards including damages to buildings, bridges and other facilities. Monitoring of land subsidence and ground fissure activities can provide useful information for assessing the extent of, and mitigating such geohazards. In order to achieve robust Synthetic Aperture Radar Interferometry (InSAR) results, six interferometric pairs of Envisat ASAR data covering 2005–2006 are collected to analyze the InSAR processing errors firstly, such as temporal and spatial decorrelation error, external DEM error, atmospheric error and unwrapping error. Then the annual subsidence rate during 2005–2006 is calculated by weighted averaging two pairs of D-InSAR results with similar time spanning. Lastly, GPS measurements are applied to calibrate the InSAR results and centimeter precision is achieved. As for the ground fissure monitoring, five InSAR cross-sections are designed to demonstrate the relative subsidence difference across ground fissures. In conclusion, the final InSAR subsidence map during 2005–2006 shows four large subsidence zones in Xian hi-tech zones in western, eastern and southern suburbs of Xian City, among which two subsidence cones are newly detected and two ground fissures are deduced to be extended westward in Yuhuazhai subsidence cone. This study shows that the land subsidence and ground fissures are highly correlated spatially and temporally and both are correlated with hi-tech zone construction in Xian during the year of 2005–2006.

Lateral internal sphincterotomy for surgically recurrent chronic anal fissure.

PubMed

Liang, Jennifer; Church, James M

2015-10-01

Lateral internal sphincterotomy cures chronic anal fissure by preventing internal sphincter hypertonia. However, cutting sphincter predisposes to sphincter dysfunction, manifests as incontinence of gas, liquid, or stool. Surgeons, therefore, can be too cautious in its use, making ineffective superficial incisions or avoiding the operation altogether. This study is designed to confirm the role of redo lateral internal sphincterotomy in the treatment of surgically recurrent chronic anal fissure. Patients undergoing repeat lateral internal sphincterotomy for surgically recurrent chronic anal fissure were accessed from a prospectively maintained database. Chronicity was defined by symptoms persisting more than 3 weeks. Contralateral sphincterotomy was performed with electrocautery through a stab incision over the intersphincteric plane. The length of sphincter division was the same as the length of the fissure. Phone questionnaire was administered and fecal continence was assessed by modified Cleveland Clinic Incontinence Score. Patients were asked to rank their overall satisfaction with the operation, and pre- and postoperative quality of life. There were 57 patients, 24 women and 33 men; mean age was 47.9 ± 14.8 years. Mean follow-up was 12.5 ± 4.2 years (range 6.2 to 25.2 years). Presenting symptoms included pain (100%), bleeding (80%), pruritus ani (39%), constipation (26%), and diarrhea. Fifty patients (90%) presented with 1 fissure, and 40 were posterior. Most procedures were performed on an outpatient basis. Fissure healing rate was 98%, and 2 patients (4%) developed minor incontinence postoperatively (one of gas, the other, gas and seepage). Overall satisfaction was 9.7 ± .9 out of 10 with a significant improvement in the quality of life from 5.7 ± 2.4 out of 10 to 9.3 ± 1.4 out of 10 (P < .001). Judicious repeat lateral sphincterotomy cures recurrent chronic fissures with minimal risk of incontinence. Copyright © 2015 Elsevier Inc. All rights reserved.

Influence of laser irradiation on pits and fissures: an in situ study.

PubMed

Correa-Afonso, Alessandra M; Pécora, Jesus D; Palma-Dibb, Regina G

2013-02-01

The aim of this in situ study was to analyze the influence of the Er:YAG, Nd:YAG, and CO(2) lasers on the enamel acid resistance of pits and fissures. The laser tissue interaction has been studied as a method of preventing occlusal caries. Thirteen volunteers wore palatal acrylic appliances containing human occlusal enamel blocks that were divided into four groups (G1, control; G2, Er:YAG; G3, Nd:YAG; G4, CO(2)). Each palatal acrylic appliance was used in the four studied groups and was used for 14 consecutive days. A sucrose solution was applied to the specimens six times per day. The specimens were then sectioned in half, and a microhardness test was applied. The other halves were analyzed using polarized light microscopy to measure the caries-like lesion areas, and a morphological analysis was conducted using a scanning electron microscope (SEM). For the statistical analysis of the data obtained from the microhardness test (Knoop hardness number. [KHN]) (α=5%), Fisher's exact test was performed, and the group means were as follows: G1, 247±71; G2, 258±70; G3, 272±73; and G4, 298±56. The results demonstrated that the control group was significantly different from G3 and G4, which presented higher microhardness values. The Wilcoxon signed-rank test was used to analyze the data obtained from the caries-lesion area measurements (mm(2)) (α=5%) (G1, 0.01±1.08; G2, 0.13±0.18; G3, 0.05±0.17; and G4, 0.09±0.22). The results no showed significant differences among the groups in this analysis. Based on the results from the present study, it may be concluded that the CO(2) and Nd:YAG lasers increased the enamel acid resistance in pits and fissures.

High-resolution AUV mapping of the 2015 flows at Axial Seamount, Juan de Fuca Ridge

NASA Astrophysics Data System (ADS)

Paduan, J. B.; Chadwick, W. W., Jr.; Clague, D. A.; Le Saout, M.; Caress, D. W.; Thomas, H. J.; Yoerger, D.

2016-12-01

Lava flows erupted in April 2015 at Axial Seamount were mapped at 1-m resolution with the AUV Sentry in August 2015 and the MBARI Mapping AUVs in July 2016 and observed and sampled with ROVs on those same expeditions. Thirty percent of terrain covered by new flows had been mapped by the MBARI AUVs prior to the eruption. Differencing of before and after maps (using ship-collected bathymetry where the AUV had not mapped before) allows calculation of extents and volumes of flows and shows new fissures. The maps reveal unexpected fissure patterns and shifts in the style of flow emplacement through a single eruption. There were 11 separate flows totaling 1.48 x 108 m3 of lava erupted from numerous en echelon fissures over 19 km on the NE caldera floor, on the NE flank, and down the N rift zone. Flows in and around the caldera have maximum thicknesses of 5-19 m. Most erupted as sheet flows and spread along intricate channels that terminated in thin margins. Some utilized pre-existing fissures. Some flows erupted from short fissures, while at least two longer new fissures produced little or no lava. A flow on the upper N rift has a spectacular lava channel flanked by narrow lava pillars supporting a thin roof left after the flow drained. A shatter ring still emanating warm fluid is visible in the map as a 15-m wide low cone. Hundreds of exploded pillows were observed but are not discernable in the bathymetry. The northern-most three flows deep on the N rift are similar in area to the others but comprise the bulk of the eruption volume. Differencing of ship-based bathymetry shows only these flows. Near the eruptive fissures they are sheet flows, but as they flowed downslope they built complexes of coalesced pillow mounds up to 67-128 m thick. Changes in flow morphology occurred through the course of the eruption. Large pillow mounds had molten cores that deformed as the eruption progressed. One flow began as a thin, effusive sheet flow but as the eruption rate decreased, a pillow mound built over the fissure. As the eruption waned on the caldera floor, near the fissure a small inflated margin developed on top of channels from an earlier phase of the flow. Several landslides occurred at the caldera wall. One is near where a 2015 fissure on the caldera floor cut through the caldera-bounding fault into the flank of the volcano.

Evaluation of Relationship between Obsessive-compulsive Disorder and Dissociative Experiences

PubMed Central

Cetinkaya, Ozlem; Maner, Fulya

2018-01-01

Objective The aim of the study is to evaluate the relationship between obsessive-compulsive disorder (OCD) symptoms and dissociative experiences and the effect of childhood traumatic experiences on this relationship in OCD patients. Methods Fifty consecutive OCD patients and 50 healthy controls are enrolled for this study. Sociodemographic and Clinical Data Form, Dissociative Experiences Scale (DES), Padua Inventory (PI) and Childhood Trauma Questionnaire (CTQ) are applied to participants. Results Average DES total score in the patient group is 20.58 and in the control group it is 4.87. In the patient group, when we evaluate the relation strengths of DES total and subscale scores with PI total score, we found out that amnesia subscale has r=0.361 (p<0.01), absorption subscale has r=0.611 (p<0.01), depersonalization/derealization subscale has r=0.574 (p<0.01), and DES total score has r=0.55 (p<0.01) relation strengths with PI total score. In patient group both DES total score and CTQ total score have influence on PI total score independently from each other. In addition to this, the level of the influence of DES total scores on PI total scores is, R2=0.399 (p<0.01) and the level of the influence of CTQ total scores on PI total scores is R2=0.343 (p<0.01). Conclusion Dissociative experiences are seen more frequently in OCD patients than healthy controls. Among dissociative experiences, absorption has stronger relation with OCD symptoms. The relation between OCD and dissociation is independent from and stronger than the relation between childhood traumatic experiences and OCD. PMID:29739129

Early life disruption to the ghrelin system with over-eating is resolved in adulthood in male rats.

PubMed

Sominsky, Luba; Ziko, Ilvana; Nguyen, Thai-Xinh; Andrews, Zane B; Spencer, Sarah J

2017-02-01

Early life overweight is a significant risk factor for developmental programming of adult obesity due to changes in the availability of metabolic factors crucial for the maturation of brain appetite-regulatory circuitry. The appetite-stimulating hormone, ghrelin, has been recently identified as a major regulator of the establishment of hypothalamic feeding pathways. Ghrelin exists in circulation in two major forms, as acylated and des-acylated ghrelin. While most research has focused on acyl ghrelin, the role of neonatal des-acyl ghrelin in metabolic programming is currently unknown. Here we assessed the influences of early life overfeeding on the ghrelin system, including acyl and des-acyl ghrelin's ability to access the hypothalamus in male rats. Our data show that early life overfeeding influences the ghrelin system short-term, leading to an acute reduction in circulating des-acyl ghrelin and increased expression of the growth hormone secretagogue receptor (GHSR) in the arcuate nucleus of the hypothalamus (ARC). These changes are associated with increased neuronal activation in response to exogenous acyl, but not des-acyl, ghrelin in the ARC and the paraventricular nucleus of the hypothalamus (PVN). Interestingly, while we observed no differences in the accessibility of the ARC to acyl or des-acyl ghrelin, less exogenous acyl ghrelin reaches the PVN in the neonatally overfed. Importantly, the influences of neonatal overfeeding on the ghrelin system were not maintained into adulthood. Therefore, while early life overfeeding results in excess body weight and stimulates acute changes in the brain's sensitivity to metabolic signals, this developmental mal-programming is at least partially alleviated in adulthood. Copyright © 2016 Elsevier Ltd. All rights reserved.

Influence des défauts de la structure du verre sur la résistance mécanique des fibres optiques

NASA Astrophysics Data System (ADS)

Chmel, A.; Baptizmanski, V. V.; Kharshak, A. A.

1992-12-01

For silica (pure and doped) optical fibers prepared from preforms irradiated by thermal neutrons and Ar^+ ions, the measurements of lifetime under transverse stress were carried out. It is found that the neutron bombardment leads to decrease of the lifetime and the strength of fiber while the ion implantation results in increasing of these parameters. The influence of particle irradiation on the glass strength is explained by the generation of structural defects which were observed by the infrared an Raman spectroscopy methods. The direction of the change of mechanical properties of fibers is determined by the type of defects and their distribution in the cross-section of fiber. Des préformes de fibres optiques de silice ont été exposées à un bombardement par des faisceaux de neutrons thermiques et d'ions Ar^+ à énergie de 40 keV afin d'engendrer des défauts de la structure respectivement dans le volume ou dans la couche superficielle des échantillons. Les fibres obtenues des préformes irradiées et non irradiées ont été mises en charge de flexion. On a déterminé leur temps de rupture sous diverses contraintes de traction sur la surface extérieure de la fibre en flexion. On a observé une diminution du temps de rupture des fibres après le bombardement neutronique et une augmentation après l'implantation ionique. L'analyse de la nature des défauts en faisant appel à la spectroscopie infrarouge et Raman a fait ressortir que l'irradiation aux ions entraînait essentiellement des liaisons chimiques dans une fine couche superficielle de l'échantillon alors que l'irradiation aux neutrons occasionnait une déformation des zones du réseau silicique dans toute la section de la préforme et de la fibre. L'amélioration de la résistance mécanique s'explique par une augmentation de la mobilité des éléments structuraux de la matrice de verre par suite d'une rupture partielle des liaisons chimiques et sa diminution par l'apparition de concentrateurs supplémentaires de contraintes à l'échelle moléculaire.

Influence Operations: Historical and Contemporary Dimensions (Les Dimensions Historiques et Contemporaines des Operations d’Influence)

DTIC Science & Technology

2007-07-31

Howard Coombs Scientific Authority: Keith Stewart Defence Research and Development (DRDC) - Toronto Command Effectiveness and Behaviour...as an unbiased and neutral nation, the reality of Canadian participation in the international community is grounded in pragmatism and a desire to...coalition ou les autres organismes au sein desquels ils l’ont acquise. Malgré sa diversité, l’expérience acquise a des points communs , dont l’acceptation

Les conditions d’hébergement favorables au rétablissement : perspective des usagers et usagères

PubMed Central

Piat, Myra; Boyer, Richard; Cloutier, Simon; Fleury, Marie-Josée; Lesage, Alain

2016-01-01

Cette recherche vise à mieux comprendre le rôle de l’hébergement dans le rétablissement des personnes vivant avec une maladie mentale grave. Quarante résidents et résidentes de différents types d’hébergement communautaire structuré ont été interrogés sur les conditions d’hébergement qui favorisent leur rétablissement. Les résultats indiquent qu’aux yeux des résidents et résidentes, les conditions matérielles d’existence ont une influence déterminante sur le rétablissement. Leurs préoccupations s’articulent autour des besoins de base tels que l’alimentation, le coût, les commodités et la qualité de leur hébergement. Les relations sociales avec leur entourage immédiat ont également une grande influence sur le rétablissement des personnes, lesquelles souhaitent d’abord conserver leurs modestes acquis, tant matériels que sociaux. Cette stabilité est prérequise à leur rétablissement. PMID:27099410

Earth fissures and localized differential subsidence

USGS Publications Warehouse

Holzer, Thomas L.; Pampeyan, Earl H.

1981-01-01

Long linear tension cracks associated with declining groundwater levels at four sites in subsiding areas in south-central Arizona, Fremont Valley, California, and Las Vegas Valley, Nevada, occur near points of maximum convex-upward curvature in subsidence profiles oriented perpendicular to the cracks. Profiles are based on repeated precise vertical control surveys of lines of closely spaced bench marks. Association of these fissures with zones of localized differential subsidence indicates that linear earth fissures are caused by horizontal tensile strains probably resulting from localized differential compaction. Horizontal tensile strains across the fissures at the point of maximum convex-upward curvature, ranging from approximately 100 to 700 microstrains (0.01 to 0.07% per year), were indicated based on measurements with a tape or electronic distance meter.

Corrosion influencée par les micro-organismes : influence du biofilm sur la corrosion des aciers, techniques et résultats recents

NASA Astrophysics Data System (ADS)

Feugeas, F.; Magnin, J. P.; Cornet, A.; Rameau, J. J.

1997-03-01

Microbiologically Influenced Corrosion (M.I.C.) studied since the beginning of this century, is responsible for the degradation of many metallic equipments. This study is a review of results dealing with M.I.C. on several types of steels as: carbon steels, stainless steels, welded steels and covered steels. M.I.C. occurs only in presence of a biofilm. The first part of this study describes chemical and physical factors involved in its development, technical methods for studying biofilms, and its contribution in the corrosion process. The second part is devoted to the study of M.I.C. cases linked with metal nature and different aqueous environments and the last part reviews the mainly mecanisms of biocorrosion. La Corrosion Influencée par les Micro-organismes (C.I.M.) ou biocorrosion, phénomène étudié depuis le début du siècle, est responsable de la dégradation d'un grand nombre d'ouvrages métalliques. Cette étude a pour but de faire le point des connaissances sur la corrosion influencée microbiologiquement de divers types d'aciers au carbone, d'aciers inoxydables, d'assemblages soudés et d'aciers revêtus. La C.I.M. n'apparaît qu'en présence d'un biofilm. La première partie de cette étude décrit les facteurs physico-chimiques impliqués dans la formation du biofilm, ces moyens d'études ainsi que son action dans le processus de biocorrosion. La seconde partie est consacrée à la description des cas de biocorrosion classés en fonction de la nature des métaux et des milieux avec lesquels ils sont en contact. La dernière partie de ce document passe en revue les principaux mécanismes de biocorrosion décrits.

Traumatic superior orbital fissure syndrome: assessment of cranial nerve recovery in 33 cases.

PubMed

Chen, Chien-Tzung; Wang, Theresa Y; Tsay, Pei-Kwei; Huang, Faye; Lai, Jui-Pin; Chen, Yu-Ray

2010-07-01

Superior orbital fissure syndrome is a rare complication that occurs in association with craniofacial trauma. The characteristics of superior orbital fissure syndrome are attributable to a constellation of cranial nerve III, IV, and VI palsies. This is the largest series describing traumatic superior orbital fissure syndrome that assesses the recovery of individual cranial nerve function after treatment. In a review from 1988 to 2002, 33 patients with superior orbital fissure syndrome were identified from 11,284 patients (0.3 percent) with skull and facial fractures. Severity of cranial nerve injury and functional recovery were evaluated by extraocular muscle movement. Patients were evaluated on average 6 days after initial injury, and average follow-up was 11.8 months. There were 23 male patients. The average age was 31 years. The major mechanism of injury was motorcycle accident (67 percent). Twenty-two received conservative treatment, five were treated with steroids, and six patients underwent surgical decompression of the superior orbital fissure. After initial injury, cranial nerve VI suffered the most damage, whereas cranial nerve IV sustained the least. In the first 3 months, recovery was greatest in cranial nerve VI. At 9 months, function was lowest in cranial nerve VI and highest in cranial nerve IV. Eight patients (24 percent) had complete recovery of all cranial nerves. Functional recovery of all cranial nerves reached a plateau at 6 months after trauma. Cranial nerve IV suffered the least injury, whereas cranial nerve VI experienced the most neurologic deficits. Cranial nerve palsies improved to their final recovery endpoints by 6 months. Surgical decompression is considered when there is evidence of bony compression of the superior orbital fissure.

Efficacy of nitroglycerine ointment in the treatment of pediatric anal fissure.

PubMed

Joda, Ali E; Al-Mayoof, Ali F

2017-11-01

Anal fissure is the most common anal disease in children. In the past few decades, the understanding of its pathophysiology has led to a progressive reduction in invasive procedures in favor of conservative treatment based on stool softeners and the relaxation of the anal sphincter. This randomized controlled study assessed the safety and efficacy of nitroglycerine (NTG) ointment in the treatment of pediatric anal fissure, which had not yet been proved. An unequal randomized controlled study included 105 pediatric patients with anal fissure who had presented to the private and outpatient clinics of the Central Teaching Hospital of Pediatrics during the period from February 2015 to May 2016. The control group consisted of 70 patients. Both groups were treated with classical conservative therapy of sitz bath, stool softener, and local anesthetic. In the second group, chemical sphincterotomy with 0.2% NTG ointment was used in 35 patients, and was applied at the anal canal twice daily for 8weeks. The primary outcomes of symptomatic improvement and healed fissure, as well as side effects, were analyzed. The average age of patients was 2years (range, 4months to 5years). Patients in the NTG group had 77% symptomatic relief and 60% healed fissure compared to the control group, which had 54% and 32.8% respectively. All were statistically significant. No serious adverse effects were noticed during the treatment period. The use of 0.2% NTG ointment is an effective therapy for anal fissure in children in terms of good healing rate and rapid symptom relief, but it has the drawback of a long treatment period, making patient compliance more difficult, in addition to the problems of tolerance and recurrence. Prospective randomized controlled study (treatment study). Type 2. Copyright © 2017 Elsevier Inc. All rights reserved.

A robotic approach to mapping post-eruptive volcanic fissure conduits

NASA Astrophysics Data System (ADS)

Parcheta, Carolyn E.; Pavlov, Catherine A.; Wiltsie, Nicholas; Carpenter, Kalind C.; Nash, Jeremy; Parness, Aaron; Mitchell, Karl L.

2016-06-01

VolcanoBot was developed to map volcanic vents and their underlying conduit systems, which are rarely preserved and generally inaccessible to human exploration. It uses a PrimeSense Carmine 1.09 sensor for mapping and carries an IR temperature sensor, analog distance sensor, and an inertial measurement unit (IMU) inside a protective shell. The first field test succeeded in collecting valuable scientific data but revealed several needed improvements, including more rugged cable connections and mechanical couplers, increased ground clearance, and higher-torque motors for uphill mobility. The second field test significantly improved on all of these aspects but it traded electrical ruggedness for reduced data collection speed. Data collected by the VolcanoBots, while intermittent, yield the first insights into the cm-scale geometry of volcanic fissures at depths of up to 25 m. VolcanoBot was deployed at the 1969 Mauna Ulu fissure system on Kīlauea volcano in Hawai'i. It collected first-of-its-kind data from inside the fissure system. We hypothesized that 1) fissure sinuosity should decrease with depth, 2) irregularity should be persistent with depth, 3) any blockages in the conduit should occur at the narrowest points, and 4) the fissure should narrow with depth until it is too narrow for VolcanoBot to pass or is plugged with solidified lava. Our field campaigns did not span enough lateral or vertical area to test sinuosity. The preliminary data indicate that 1) there were many irregularities along fissures at depth, 2) blockages occurred, but not at obviously narrow locations, and 3) the conduit width remained a consistent 0.4-0.5 m for most of the upper 10 m that we analyzed.

Fissurectomy Combined with High-Dose Botulinum Toxin Is a Safe and Effective Treatment for Chronic Anal Fissure and a Promising Alternative to Surgical Sphincterotomy.

PubMed

Barnes, Thomas G; Zafrani, Zakhi; Abdelrazeq, Ayman S

2015-10-01

There is paucity of data on the long-term outcome of the combination of fissurectomy and botulinum toxin A injection for the management of chronic anal fissure. The aim of this study is to assess the safety, efficacy, and long-term outcome of the combination of fissurectomy and botulinum toxin A injection. This is a nonrandomized prospective cohort study. This study was conducted at a district general hospital in the United Kingdom. The cohort included all patients treated with fissurectomy and botulinum toxin A for chronic anal fissure between September 2008 and March 2012. The patients were treated with a combination of fissurectomy and botulinum toxin A injection. Symptomatic relief, fissure healing, complications, recurrence, and the need for further surgical intervention. One hundred and two patients received fissurectomy and botulinum toxin A injection for chronic anal fissure. At 12-week follow-up, 68 patients had resolution of symptoms and complete healing of chronic anal fissure, 29 patients had improvement of symptoms but incomplete healing and had further topical or botulinum toxin A treatment with subsequent complete healing. Ninety-five patients (93%) reported no postoperative complications. Seven patients reported a degree of incontinence in the immediate postoperative period. All reported normal continence at12-week follow-up. No local complications were observed or reported. At the mean follow-up of 33 months, there was no evidence of recurrence. Twelve-month follow-up was conducted via telephone interview only. This study is nonrandomized and did not examine the dose response of Botulinum Toxin A. Fissurectomy combined with high-dose botulinum toxin A is a safe, effective, and durable option for the management of chronic anal fissure and a promising alternative to surgical sphincterotomy.

Cyp1b1 Regulates Ocular Fissure Closure Through a Retinoic Acid–Independent Pathway

PubMed Central

Williams, Antionette L.; Eason, Jessica; Chawla, Bahaar; Bohnsack, Brenda L.

2017-01-01

Purpose Mutations in the CYP1B1 gene are the most commonly identified genetic causes of primary infantile-onset glaucoma. Despite this disease association, the role of CYP1B1 in eye development and its in vivo substrate remain unknown. In the present study, we used zebrafish to elucidate the mechanism by which cyp1b1 regulates eye development. Methods Zebrafish eye and neural crest development were analyzed using live imaging of transgenic zebrafish embryos, in situ hybridization, immunostaining, TUNEL assay, and methylacrylate sections. Cyp1b1 and retinoic acid (RA) levels were genetically (morpholino oligonucleotide antisense and mRNA) and pharmacologically manipulated to examine gene function. Results Using zebrafish, we observed that cyp1b1 was expressed in a specific spatiotemporal pattern in the ocular fissures of the developing zebrafish retina and regulated fissure patency. Decreased Cyp1b1 resulted in the premature breakdown of laminin in the ventral fissure and altered subsequent neural crest migration into the anterior segment. In contrast, cyp1b1 overexpression inhibited cell survival in the ventral ocular fissure and prevented fissure closure via an RA-independent pathway. Cyp1b1 overexpression also inhibited the ocular expression of vsx2, pax6a, and pax6b and increased the extraocular expression of shha. Importantly, embryos injected with human wild-type but not mutant CYP1B1 mRNA also showed colobomas, demonstrating the evolutionary and functional conservation of gene function between species. Conclusions Cyp1b1 regulation of ocular fissure closure indirectly affects neural crest migration and development through an RA-independent pathway. These studies provide insight into the role of Cyp1b1 in eye development and further elucidate the pathogenesis of primary infantile-onset glaucoma. PMID:28192799

Occupational Health and Safety in a Vocational Training Program: How Gender Impacts Teachers' Strategies and Power Relationships: Santé et sécurité des stagiaires dans un programme de formation professionnelle: Impact du genre sur les stratégies et rapports de pouvoir.

PubMed

Laberge, Marie; Tondoux, Aurélie; Camiré Tremblay, Fanny; MacEachen, Ellen

2017-11-01

In Quebec (Canada), the Work-Oriented Training Path, a work-study program, prepares students who are having difficulty at school for the job market. Occupational health and safety is an important part of their training. This article aims to analyze the impact of gender on the interpersonal dynamics among teachers, trainees, and key actors from the businesses involved. This article also looks at the influence of gender on teachers' strategies and capacity to act regarding occupational health and safety. Using a work activity analysis lens, a multiple case-study analysis of teachers' work activity was carried out. The findings show that gendered social relationships create a specific supervisory context that influences occupational health and safety training. Solutions aimed at reducing the negative impact of gender-associated prejudice on work injury prevention include training for teachers, attention to work organization at the schools, and the creation of cohesive teachers' work teams. Résumé Au Québec, le Parcours de formation axée sur l'emploi (WOTP), un programme en alternance, offre une préparation au marché du travail aux élèves en difficultés scolaires. La santé et la sécurité du travail (SST) est un enjeu important de la formation. L'article vise à analyser l'impact du genre dans la dynamique relationnelle entre les enseignant.es, leurs élèves et les interlocuteurs clés des entreprises impliquées, et son influence sur les stratégies et la capacité d'agir des enseignant.es en matière de SST. Une analyse de cas multiples basée sur l'analyse ergonomique de l'activité des enseignants a été menée. Les résultats montrent que les relations sociales de genre déterminent un contexte spécifique de supervision qui influence la formation à la SST. La formation des enseignant.es, l'organisation scolaire et la création de collectifs enseignants cohésifs sont des pistes de solution pour réduire l'effet négatif des préjugés liés au genre influençant la prévention des lésions professionnelles.

Three-Dimensional Numerical Simulation on Triaxial Failure Mechanical Behavior of Rock-Like Specimen Containing Two Unparallel Fissures

NASA Astrophysics Data System (ADS)

Huang, Yan-Hua; Yang, Sheng-Qi; Zhao, Jian

2016-12-01

A three-dimensional particle flow code (PFC3D) was used for a systematic numerical simulation of the strength failure and cracking behavior of rock-like material specimens containing two unparallel fissures under conventional triaxial compression. The micro-parameters of the parallel bond model were first calibrated using the laboratory results of intact specimens and then validated from the experimental results of pre-fissured specimens under triaxial compression. Numerically simulated stress-strain curves, strength and deformation parameters and macro-failure modes of pre-fissured specimens were all in good agreement with the experimental results. The relationship between stress and the micro-crack numbers was summarized. Crack initiation, propagation and coalescence process of pre-fissured specimens were analyzed in detail. Finally, horizontal and vertical cross sections of numerical specimens were derived from PFC3D. A detailed analysis to reveal the internal damage behavior of rock under triaxial compression was carried out. The experimental and simulated results are expected to improve the understanding of the strength failure and cracking behavior of fractured rock under triaxial compression.

Tracer Movement in a Single Fissure in Granitic Rock: Some Experimental Results and Their Interpretation

NASA Astrophysics Data System (ADS)

Neretnieks, Ivars; Eriksen, Tryggve; TäHtinen, PäIvi

1982-08-01

Radionuclide migration was studied in a natural fissure in a granite core. The fissure was oriented parallel to the axis in a cylindrical core 30 cm long and 20 cm in diameter. The traced solution was injected at one end of the core and collected at the other. Breakthrough curves were obtained for the nonsorbing tracers, tritiated water, and a large-molecular-weight lignosulphonate molecule and for the sorbing tracers, cesium and strontium. From the breakthrough curves for the nonsorbing tracers it could be concluded that channeling occurs in the single fissure. A `dispersion' model based on channeling is presented. The results from the sorbing tracers indicate that there is substantial diffusion into and sorption in the rock matrix. Sorption on the surface of the fissure also accounts for a part of the retardation effect of the sorbing species. A model which includes the mechanisms of channeling, surface sorption, matrix diffusion, and matrix sorption is presented. The experimental breakthrough curves can be fitted fairly well by this model by use of independently obtained data on diffusivities and matrix sorption.

Glaser Fissure, Huguier Canal, and Civinini Canal: A Confused Eponymical Imbroglio.

PubMed

Mudry, Albert

2015-07-01

Huguier canal or Civinini canal is a canaliculus in the Glaser fissure allowing the exit of the chorda tympani from the tympanic cavity. The aim of this study is to try to put some order in the origins and relations of these different eponyms, and to evaluate their pertinence in the actual anatomical terminology. This study demonstrates that Huguier and Civinini are not the first to describe this canal in the 1830s. Furthermore, it confirms that Glaser does not describe the related fissure in 1680. In conclusion, Glaser, Civinini, and Huguier no longer have a place in the actual anatomical nomenclature of the fine details of the temporal bone. To avoid confusion and errors, they must be replaced by anterior canaliculus for the chorda tympani and petrotympanic fissure.

A kinetic formulation of piezoresistance in N-type silicon: Application to non-linear effects

NASA Astrophysics Data System (ADS)

Charbonnieras, A. R.; Tellier, C. R.

1999-07-01

This paper is devoted to the theoretical study of the influence of the temperature and of the doping on the piezoresistance of N-type silicon. In the first step the fractional change in the resistivity caused by stresses is calculated in the framework of a multivalley model using a kinetic transport formulation based on the Boltzmann transport equation. In the second step shifts in the minima of the conduction band and the resulting shift of the Fermi level are expressed in terms of deformation potentials and of stresses. General expressions for the fundamental linear, π_{11} and π_{12}, and non-linear, π_{111}, π_{112}, π_{122} and π_{123}, piezoresistance coefficients are then derived. Plots of the non-linear piezoresistance coefficients against the reduced shift of the Fermi level or against temperature allow us to characterize the influence of doping and temperature. Finally some attempts are made to estimate the non-linearity for heavily doped semiconductor gauges. Cette publication est consacrée à l'étude théorique de l'influence de la température et du dopage sur la piezorésistivité du silicium type N. Dans une première étape nous adoptons le modèle de vallées et nous utilisons une formulation cinétique du transport électronique faisant appel à l'équation de transport de Boltzmann pour calculer la variation de la résistivité du semiconducteur sous contrainte. Dans la deuxième étape nous exprimons les déplacements des minima de la bande de conduction et du niveau de Fermi en termes de potentiels de déformation et de contraintes. Nous proposons ensuite des expressions générales pour les coefficients piezorésistifs fondamentaux linéaires, π_{11} et π_{12}, et non-linéaires, π_{111}, π_{112}, π_{122} et π_{123}. Des représentations graphiques des variations des coefficients non-linéaires permettent de caractériser l'influence du dopage et de la température. Enfin nous fournissons une première pré-estimation des effets non-linéaires pour des jauges en silicium N dégénéré.

Les connaissances linguistiques des cadres: Le point de vue de la direction des entreprises. Les besoins langagiers des futurs cadres d'entreprise. (Language Skills of Trained Personnel: The Viewpoint of Business Management. The Language Needs of Future Business Managers).

ERIC Educational Resources Information Center

Hatry, Paul

The first part of this paper outlines the factors that appear to influence the language attitudes or language behavior of business directors and managerial staff in Belgium. Age and the economic and political surroundings appear to be the principal factors. The younger individuals are, the more positive are their attitudes about the language…

Geometry of the September 1971 eruptive fissure at Kilauea volcano, Hawaii

USGS Publications Warehouse

Dvorak, J.J.

1990-01-01

A three-dimensional model has been used to estimate the location and dimensions of the eruptive fissure for the 24-29 September 1971 eruption along the southwest rift zone of Kilauea volcano, Hawaii. The model is an inclined rectangular sheet embedded in an elastic half-space with constant displacement on the plane of the sheet. The set of "best" model parameters suggests that the sheet is vertical, extends from a depth of about 2 km to the surface, and has a length of about 14 km. Because this sheet intersects the surface where eruptive vents and extensive ground cracking formed during the eruption, this sheet probably represents the conduit for erupted lava. The amount of displacement perpendicular to the sheet is about 1.9 m, in the middle range of values measured for the amount of opening across the September 1971 eruptive fissure. The thickness of the eruptive fissure associated with the January 1983 east rift zone eruption was determined in an earlier paper to be 3.6 m, about twice the thickness determined here for the September 1971 eruption. Because the lengths (12 km for 1983 and 14 km for 1971) and heights (about 2 km) of the sheet models derived for the January 1983 and September 1971 rift zone eruptions are nearly identical, the greater thickness for the January 1983 eruptive fissure implies that the magma pressure was about a factor of two greater to form the January 1983 eruptive fissure. Because the September 1971 and January 1983 eruptive fissures extent to depths of only a few kilometers, the region of greatest compressive stress produced along the volcano's flank by either of these eruptive fissures would also be within a few kilometers of the surface. Previous work has shown that rift eruptions and intrusions contribute to the buildup of compressive stress along Kilauea's south flank and that this buildup is released by increased seismicity along the south flank. Because south flank earthquakes occur at significantly greater depths, i.e., from 5 to 13 km, than the vertical extent of the 1971 and 1983 eruptiv fissures, the depth of emplacement of these eruptive fissures cannot be the main factor in controlling the hypocentral depths of south flank earthquakes. Two possible explanations for the occurrence of south flank earthquakes in the depth range of 5-13 km are (1) a deeper pressure source, possibly related to deeper magma storage within the rift zone, and (2) a lowstrength region located between 5 and 13 km beneath Kilauea's south flank, possibly at the interface between oceanic sediments and the base of the Hawaiian volcanics. ?? 1990 Springer-Verlag.

Deformation during the 1975-84 Krafla rifting crisis, NE Iceland, measured by optical image correlation

NASA Astrophysics Data System (ADS)

Hollingsworth, J.; Leprince, S.; Avouac, J.; Ayoub, F.

2011-12-01

In this study we combine results from optical image correlation of SPOT, KH-9 spy satellite and aerial photos, EDM data and high resolution topographic data to better constrain the 3D deformation associated with the 1975-84 Krafla rifting crisis, NE Iceland. Inversion of the various geodetic datasets yields new volumes for the amount of material injected into the crust during this rifting crisis. Correlation of aerial photos from 1957 and 1990 for the middle section of the 2 km-wide Krafla fissure swarm, along with DEM differencing of their respective 1957 and 1990 DEM's (extracted using photogrammetric techniques), provides constraints on the full 3D displacement field spanning the entire rifting period. Elastic dislocation modeling of this displacement data is then used to determine the geometry of faulting and diking in the crust. In contrast to leveling data from the northern end of the fissure swarm (Rubin, et al., 1988), we find that dikes do not extend into the upper 1-2 km, where extension is accommodated primarily by faulting in the fissure swarm. Dislocation modeling of a 4 m-wide dike injected between 2 km and 6 km in the crust produces a maximum surface strain which reaches the elastic yield limit for rock (derived from laboratory experiments of deformed granite) at two points spanning a 2 km-wide zone above the dike, and which corresponds with the location of the major rift-bounding faults of the Krafla fissure swarm. If dikes extend nearer to the surface, the predicted fissure zone width would be correspondingly smaller (consistent with the southern-end of the fissure swarm), while deeper diking produces a wider fissure swarm (consistent with the northern-end of the fissure swarm). The apparent northward increase in depth of diking is consistent with the flexural effects of rift-margin topography (Behn, et al., 2006); increased flexure in the south, where the Krafla caldera is located, results in the promotion of shallow diking, where as subdued topography in the north promotes deeper diking. Correlation of aerial photos between 1957 and 1976 (during the early stages of the rifting crisis) indicate 2 m extension, which is localized on faults along the northern end of the fissure swarm. No fault slip occurs in the central section of the fissure swarm during the same period, suggesting extension in the north during the early stages of rifting may result from dike injections sourced from the north (possibly offshore), rather than the Krafla caldera to the south. A similar variation in magmatic source region was also observed during the 2005-2009 Afar rifting crisis in East Africa.

Anal fissure - slideshow

MedlinePlus

... this page: //medlineplus.gov/ency/presentations/100154.htm Anal fissure - series—Normal anatomy To use the sharing ... rectum through which passes stool during defecation. The anal sphincter is a critical mechanism for control of ...

Sylvian fissure lipoma with angiomatous component and associated brain malformation: A case report.

PubMed

Thakur, Shruti; Sood, Ram Gopal; Jhobta, Anupam; Makhaik, Sushma; Thakur, Charusmita

2013-01-01

Intracranial lipomas are congenital malformations. These uncommon lesions have an incidence of 0.1 to 1.7% of all intracranial tumors. Most cases are located at midline and 5% are along the sylvian fissures. If symptomatic, seizures are the most common symptom. These tumors are slow growing and have favorable outcome. We report a case of a 25-year-old man whose CT and MRI revealed a lesion in right sylvian fissure suggesting a lipoma with abnormal vasculature and overlying cortical dysplasia.

Developpement d'un modele analytique pour l'analyse en elasticite lineaire de champs de deformation et contrainte au sein d'un polycristal. comparaison avec la methode des elements finis =

NASA Astrophysics Data System (ADS)

Bretin, Remy

L'endommagement par fatigue des materiaux est un probleme courant dans de nombreux domaines, dont celui de l'aeronautique. Afin de prevenir la rupture par fatigue des materiaux il est necessaire de determiner leur duree de vie en fatigue. Malheureusement, dues aux nombreuses heterogeneites presentes, la duree de vie en fatigue peut fortement varier entre deux pieces identiques faites dans le meme materiau ayant subi les memes traitements. Il est donc necessaire de considerer ces heterogeneites dans nos modeles afin d'avoir une meilleure estimation de la duree de vie des materiaux. Comme premiere etape vers une meilleure consideration des heterogeneites dans nos modeles, une etude en elasticite lineaire de l'influence des orientations cristallographiques sur les champs de deformations et de contraintes dans un polycristal a ete realisee a l'aide de la methode des elements finis. Des correlations ont pu etre etablies a partir des resultats obtenus, et un modele analytique en elasticite lineaire prenant en compte les distributions d'orientations cristallographiques et les effets de voisinage a pu etre developpe. Ce modele repose sur les bases des modeles d'homogeneisation classique, comme le schema auto-coherent, et reprend aussi les principes de voisinage des automates cellulaires. En prenant pour reference les resultats des analyses elements finis, le modele analytique ici developpe a montre avoir une precision deux fois plus grande que le modele auto-coherent, quel que soit le materiau etudie.

Off-fault ground ruptures in the Santa Cruz Mountains, California: Ridge-top spreading versus tectonic extension during the 1989 Loma Prieta earthquake

USGS Publications Warehouse

Ponti, Daniel J.; Wells, Ray E.

1991-01-01

The Ms 7.1 Loma Prieta earthquake of 18 October 1989 produced abundant ground ruptures in an 8 by 4 km area along Summit Road and Skyland Ridge in the Santa Cruz Mountains. Predominantly extensional fissures formed a left-stepping, crudely en echelon pattern along ridges of the hanging-wall block southwest of the San Andreas fault, about 12 km northwest of the epicenter. The fissures are subparallel to the San Andreas fault and appear to be controlled by bedding planes, faults, joints, and other weak zones in the underlying Tertiary sedimentary strata of the hanging-wall block. The pattern of extensional fissures is generally consistent with tectonic extension across the crest of the uplifted hanging-wall block. Also, many displacements in Laurel Creek canyon and along the San Andreas and Sargent faults are consistent with right-lateral reverse faulting inferred for the mainshock. Additional small tensile failures along the axis of the Laurel anticline may reflect growth of the fold during deep-seated compression. However, the larger ridge-top fissures commonly have displacements that are parallel to the north-northeast regional slope directions and appear inconsistent with east-northeast extension expected from this earthquake. Measured cumulative displacements across the ridge crests are at least 35 times larger than that predicted by the geodetically determined surface deformation. These fissures also occur in association with ubiquitous landslide complexes that were reactivated by the earthquake to produce the largest concentration of co-seismic slope failures in the epicentral region. The anomalously large displacements and the apparent slope control of the geometry and displacement of many co-seismic surface ruptures lead us to conclude that gravity is an important driving force in the formation of the ridge-top fissures. Shaking-induced gravitational spreading of ridges and downslope movement may account for 90¿ or more of the observed displacements on the linear fissures. Similar fissures occurred in the same area and elsewhere near the San Andreas fault during the predominantly right-lateral 1906 San Francisco earthquake and suggest that the Loma Prieta ground ruptures may, in large part, be independent of fault kinematics.

Pulmonary lobe segmentation based on ridge surface sampling and shape model fitting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ross, James C., E-mail: jross@bwh.harvard.edu; Surgical Planning Lab, Brigham and Women's Hospital, Boston, Massachusetts 02215; Laboratory of Mathematics in Imaging, Brigham and Women's Hospital, Boston, Massachusetts 02126

2013-12-15

Purpose: Performing lobe-based quantitative analysis of the lung in computed tomography (CT) scans can assist in efforts to better characterize complex diseases such as chronic obstructive pulmonary disease (COPD). While airways and vessels can help to indicate the location of lobe boundaries, segmentations of these structures are not always available, so methods to define the lobes in the absence of these structures are desirable. Methods: The authors present a fully automatic lung lobe segmentation algorithm that is effective in volumetric inspiratory and expiratory computed tomography (CT) datasets. The authors rely on ridge surface image features indicating fissure locations and amore » novel approach to modeling shape variation in the surfaces defining the lobe boundaries. The authors employ a particle system that efficiently samples ridge surfaces in the image domain and provides a set of candidate fissure locations based on the Hessian matrix. Following this, lobe boundary shape models generated from principal component analysis (PCA) are fit to the particles data to discriminate between fissure and nonfissure candidates. The resulting set of particle points are used to fit thin plate spline (TPS) interpolating surfaces to form the final boundaries between the lung lobes. Results: The authors tested algorithm performance on 50 inspiratory and 50 expiratory CT scans taken from the COPDGene study. Results indicate that the authors' algorithm performs comparably to pulmonologist-generated lung lobe segmentations and can produce good results in cases with accessory fissures, incomplete fissures, advanced emphysema, and low dose acquisition protocols. Dice scores indicate that only 29 out of 500 (5.85%) lobes showed Dice scores lower than 0.9. Two different approaches for evaluating lobe boundary surface discrepancies were applied and indicate that algorithm boundary identification is most accurate in the vicinity of fissures detectable on CT. Conclusions: The proposed algorithm is effective for lung lobe segmentation in absence of auxiliary structures such as vessels and airways. The most challenging cases are those with mostly incomplete, absent, or near-absent fissures and in cases with poorly revealed fissures due to high image noise. However, the authors observe good performance even in the majority of these cases.« less

Twelfth annual meeting of the International Society for the History of the Neurosciences. June 19-23, 2007.

PubMed

2008-01-01

Christian Baumann (Justus-Liebig-University, Giessen, Germany): Wilbrand's ideas of the visual cortex. Hermann Wilbrand (1851-1935) is considered one of the founders of neuro-opthalmology. He is best known for the monumental handbook, Die Neurologie des Auges (Wilbrand &Saenger, 1898-1922). Prior to this encyclopedic work, Wilbrand published three clinical monographs on the diagnosis of brain diseases with the help of ophthalmological examinations(Wilbrand 1881, 1884, 1890). But Wilbrand not only treated clinical aspects but also supplied evidence for the localization of the optical center in the calcarine fissure of the occipital cortex. Moreover, he worked out theories of the organization of the visual cortex that, as he postulated, must contain subdivisions corresponding to the qualities of visual sensation such as light, form, and color. Wilbrand also considered the binocular input of the visual cortex and put forward a detailed scheme of the projection of the two retinae to the occipital cortex that anticipated modern concepts of ocular dominance columns. His ideas are critically reviewed in the light of current opinions about his topics.

Migration of recharge waters downgradient from the Santa Catalina Mountains into the Tucson basin aquifer, Arizona, USA

NASA Astrophysics Data System (ADS)

Cunningham, Erin E. B.; Long, Austin; Eastoe, Chris; Bassett, R. L.

Aquifers in the arid alluvial basins of the southwestern U.S. are recharged predominantly by infiltration from streams and playas within the basins and by water entering along the margins of the basins. The Tucson basin of southeastern Arizona is such a basin. The Santa Catalina Mountains form the northern boundary of this basin and receive more than twice as much precipitation (ca. 700mm/year) as does the basin itself (ca. 300mm/year). In this study environmental isotopes were employed to investigate the migration of precipitation basinward through shallow joints and fractures. Water samples were obtained from springs and runoff in the Santa Catalina Mountains and from wells in the foothills of the Santa Catalina Mountains. Stable isotopes (δD and δ18O) and thermonuclear-bomb-produced tritium enabled qualitative characterization of flow paths and flow velocities. Stable-isotope measurements show no direct altitude effect. Tritium values indicate that although a few springs and wells discharge pre-bomb water, most springs discharge waters from the 1960s or later. Résumé La recharge des aquifères des bassins alluviaux arides du sud-ouest des États-Unis est assurée surtout à partir des lits des cours d'eau et des playas dans les bassins, ainsi que par l'eau entrant à la bordure de ces bassins. Le bassin du Tucson, dans le sud-est de l'Arizona, est l'un de ceux-ci. La chaîne montagneuse de Santa Catalina constitue la limite nord de ce bassin et reçoit plus de deux fois plus de précipitations (environ 700mm/an) que le bassin (environ 300mm/an). Dans cette étude, les isotopes du milieu ont été utilisés pour analyser le déplacement de l'eau de pluie vers le bassin au travers des fissures et des fractures proches de la surface. Des échantillons d'eau ont été prélevés dans les sources et dans l'écoulement de surface de la chaîne montagneuse et dans des puits au pied de la chaîne. Les isotopes stables (δD et δ18O) et le tritium d'origine thermonucléaire permettent de caractériser qualitativement les cheminements de l'eau et leurs vitesses. Les isotopes stables ne mettent pas en évidence un effet d'altitude. Les teneurs en tritium indiquent que quelques sources et certains puits fournissent une eau ancienne, alors que l'eau de la plupart des sources date des années soixante ou est plus récente. Resumen Los acuíferos en las cuencas aluviales áridas del sudoeste de los Estados Unidos de América se recargan principalmente por la infiltración procedentes de los arroyos y playas de las propias cuencas y por entradas a lo largo de los límites de las mismas. La cuenca de Tucson, en el sudeste de Arizona es una de ellas. Las Montañas de Santa Catalina forman el contorno septentrional de esta cuenca y reciben una precipitación de más del doble (700mm/año) que la media de la propia cuenca (unos 300mm/año). En este estudio, se utilizaron isótopos ambientales para investigar la infiltración a través de fracturas y juntas superficiales. Se obtuvieron muestras de manantiales y de la escorrentía en las Montañas de Santa Catalina, así como de pozos ubicados al pie de las mismas. Los isótopos estables (Deuterio y Oxígeno-18) y el Tritio procedente de las bombas termonucleares permitieron la caracterización cualitativa de las líneas de flujo y de las velocidades. Los datos procedentes de la medida de isótopos estables no parecen presentar un efecto de altitud. Los valores de Tritio indican que aunque algunos pozos y manantiales descargan agua previa a los ensayos termonucleares, la mayoría descargan aguas de fecha posterior a 1960.

Shift from magmatic to phreatomagmatic explosion controlled by the evolution of lateral fissure eruption in Suoana Crater, Miyakejima

NASA Astrophysics Data System (ADS)

Geshi, Nobuo; Nemeth, Karoly; Noguchi, Rina; Oikawa, Teruki

2016-04-01

Combined analysis of the proximal deposit and exposed feeder-diatreme structure of the Suoana Crater of Miyakejima reveals the process of magma-water interaction controlled by the evolution of lateral fissure eruption in a stratovolcanic edifice. The Suoana Crater, an oval maar with 400 x 300 m across is one of the craters of the Suoana-Kazahaya crater chain which is formed during a fissure eruption in the 7th Century. The eruption fissure extends ~3 km from the summit area (~700 m asl) to the lower-flank area (~200m asl). The eruption fissure consists of upper maar-chain (>450 m asl) and lower scora-cone chain. As the wall of the 2000 AD caldera truncated at near the center of the Suoana Crater, the vertical section of the feeder dike - diatreme - maar system of the Suoana Crater is exposed in the caldera wall (Geshi et al., 2011). The ejected materials from the Suoana crater indicate the transition of eruption style from magmatic to phreatomagmatic. The juvenile clasts in the lower half of the deposit exhibit spatter-like shape, indicating the typical deposit from a vigorous fire fountain. Contrary, the juvenile clasts in the upper half are less vesiculated and exhibit cauliflower-shape, indicating the typical phreatomagmatic activity. This transition indicates that the magma-water interaction started at the middle of the eruption. Judging from the ratio of the thickness of the lower and upper parts, the contrast of the content of juvenile clasts, and bulk density of the deposit, the total ejected volume of magma is larger in the lower part compare to the upper part. The transition from magmatic to phreatomagmatic occurred only in the upper half of the eruption fissure, including the Suoana crater, whereas the lower half of the fissure continued dry magmatic eruption throughout their activity. The limited distribution of phreatomagmatic activity can be resulted by the magma extraction from the upper feeder dike system to the lower eruption fissure as it contributed to the general drop of magmatic pressure in the upper section of the fissure-fed conduit. The cross section of the Suoana diatreme indicates that the phreatomagmatic explosion occurred ~260 m below the original ground surface, corresponding to ~400 m above the present sea level. This elevation is clearly higher than that of the lower part of the eruption fissure which reached to the point ~ 200 m above sea level. The drop of magma flux and the general gravitational instability of the conduit resulted that ground water was able to access the still hot feeder dikes and initiate phreatomagmatic explosive eruptions (e.g., Geshi and Neri, 2014). The existence of buried summit caldera that can host large quantity of groundwater also contributes the limited distribution of phreatomagmatic activity in the summit area. We propose that this seemingly reversal trend from early magmatic to later phreatomagmatic explosive eruption style in top of large mafic caldera volcanoes in fissure fed volcanic islands is probably a far more common eruption mechanism and hence it needs to be considered in volcanic hazard scenario descriptions.

Calcified gallstone fissures: the reversed Mercedes Benz sign.

PubMed

Strijk, S P

1987-01-01

This article describes the occurrence of an unusual radiating pattern of calcification in the center of large radiolucent gallstones. The radiographic findings are attributed to calcium deposition within the fissures of biliary calculi.

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3765 Pit and fissure sealant and... depressions (faults in the enamel) in the biting surfaces of teeth to prevent cavities. (b) Classification...

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3765 Pit and fissure sealant and... depressions (faults in the enamel) in the biting surfaces of teeth to prevent cavities. (b) Classification...

The economics of pit and fissure sealants in preventive dentistry: a review.

PubMed

Kitchens, Dinah H

2005-08-15

Oral diseases are progressive, cumulative, and become more intricate to treat with advancement. While dental caries is an infectious transmissible disease with children being at the highest risk, primary prevention can reduce this risk. Primary prevention in dentistry is usually considered to be community fluoridated water supplies, professional fluoride treatments, and pit and fissure sealants. While community fluoridated water supplies have been proven to be cost-effective, the cost-effectiveness of pit and fissure sealants has primarily been studied in school-based programs of children from low socio-economic backgrounds. Dental sealant programs are just one way to help increase primary prevention in the oral health disparities of children. The purpose of this paper is to review the literature regarding the cost-effectiveness of pit and fissure sealants as a preventive strategy in preventive dentistry.

Comparative study of Ksharasutra suturing and Lord's anal dilatation in the management of Parikartika (chronic fissure-in-ano).

PubMed

Dudhamal, Tukaram S; Baghel, Madhav Singh; Bhuyan, Chaturbhuja; Gupta, Sanjay Kumar

2014-04-01

Parikartika resembles fissure-in-ano which is very common among all ano-rectal disorders. In Ayurvedic texts, Parikartika is described as a complication of Vamana and Virechana as well as complication of Atisara. Ksharasutra was proved successful in the management of fistula-in-ano, piles, and there is a need to try its efficacy in fissure-in-ano. To evaluate the role of Ksharasutra suturing (KSS) in fissure bed in chronic fissure-in-ano. Total 100 patients of chronic fissure-in-ano were selected and randomly divided into two groups (50 in each group). In group-A, patients were undergone by KSS; while in patients of Group-B Lord's anal dilatation followed by KSS was done under spinal anesthesia. The KSS was done once and after slough out of Ksharasutra, the wound was treated for 4 weeks and assessment of the result was done on the basis of gradation adopted. The pain relief on 14(th) day in Group-A was 86% while in Group-B 100% was observed. As on 7(th) day in Group-A, oozing was stopped in 68% patients, while in Group-B, oozing was stopped in 82% patients. On 21(st) day, Group-B showed more healing (85%) as compared to Group-A (69%). In this study 68% of patients were cured. In Group-B (KSS with Lord's anal dilatation) patients were cured early as compared to patients of Group-A (KSS alone).

Mise au point du rheometre a cisaillement annulaire pour l'etude de rheologie d'un mastic bitumineux avec verre incorpore =

NASA Astrophysics Data System (ADS)

El Mansouri, Souleimane

Dans le domaine viscoelastique lineaire (VEL, domaine des petites deformations), le comportement thermomecanique du bitume et du mastic bitumineux (melange uniforme de bitume et de fillers) a ete caracterise au Laboratoire des Chaussees et Materiaux Bitumineux (LCMB) de l'Ecole de technologie superieure (ETS) avec l'appui de nos partenaires externes : la Societe des Alcools du Quebec (SAQ) et Eco Entreprises Quebec (EEQ). Les proprietes rheologiques des bitumes et des mastics ont ete mesurees grâce a un nouvel outil d'investigation appele, Rheometre a Cisaillement Annulaire (RCA), sous differentes conditions de chargement. Cet appareil permet non seulement de solliciter des eprouvettes de tailles importantes par rapport a celles utilisees lors des essais classiques, mais aussi d'effectuer des essais en conditions quasi-homogenes, ce qui permet de donner acces a la loi de comportement des materiaux. Les essais sont realises sur une large gamme de temperatures et de frequences (de -15 °C a 45°C et de 0,03Hz a 10 Hz). Cette etude a ete menee principalement pour comparer le comportement d'un bitume avec celui d'un mastic bitumineux dans le domaine des petites deformations. neanmoins, dans une seconde perspective, on s'interesse a l'influence des fillers de verre de post-consommation sur le comportement d'un mastic a faibles niveaux de deformations en comparant l'evolution des modules complexes de cisaillements (G*) d'un mastic avec fillers de verre et un mastic avec fillers conventionnels (calcaire). Enfin, le modele analogique 2S2P1D est utilise pour simuler le comportement viscoelastique lineaire des bitumes et des mastics bitumineux testes lors de la campagne experimentale.

Commerce de detail de l'essence automobile: Modelisation de l'impact a court terme des facteurs endogenes et exogenes sur les ventes d'essence dans les stations-service a Montreal

NASA Astrophysics Data System (ADS)

Nguimbus, Raphael

La determination de l'impact des facteurs sous controle et hors controle qui influencent les volumes de vente des magasins de detail qui vendent des produits homogenes et fortement substituables constitue le coeur de cette these. Il s'agit d'estimer un ensemble de coefficients stables et asymtotiquement efficaces non correles avec les effets specifiques aleatoires des sites d'essence dans le marche de Montreal (Quebec, Canada) durant is periode 1993--1997. Le modele econometrique qui est ainsi specifie et teste, isole un ensemble de quatre variables dont le prix de detail affiche dans un site d'essence ordinaire, la capacite de service du site pendant les heures de pointe, les heures de service et le nombre de sites concurrents au voisinage du site dans un rayon de deux kilometres. Ces quatre facteurs influencent les ventes d'essence dans les stations-service. Les donnees en panel avec les methodes d'estimation robustes (estimateur a distance minimale) sont utilisees pour estimer les parametres du modele de vente. Nous partons avec l'hypothese generale selon laquelle il se developpe une force d'attraction qui attire les clients automobilistes dans chaque site, et qui lui permet de realiser les ventes. Cette capacite d'attraction varie d'un site a un autre et cela est du a la combinaison de l'effort marketing et de l'environnement concurrentiel autour du site. Les notions de voisinage et de concurrence spatiale expliquent les comportements des decideurs qui gerent les sites. Le but de cette these est de developper un outil d'aide a la decision (modele analytique) pour permettre aux gestionnaires des chaines de stations-service d'affecter efficacement les ressources commerciales dans ies points de vente.

Pumping-induced stress and strain in aquifer systems in Wuxi, China

NASA Astrophysics Data System (ADS)

Zhang, Yun; Yu, Jun; Gong, Xulong; Wu, Jichun; Wang, Zhecheng

2018-05-01

Excessive groundwater withdrawal from an aquifer system leads to three-dimensional displacement, causing changes in the states of stress and strain. Often, land subsidence and sometimes earth fissures ensue. Field investigation indicates that land subsidence and earth fissures in Wuxi, a city in eastern China, are mainly due to excessive groundwater withdrawal, and that they are temporally and spatially related to groundwater pumping. Groundwater withdrawal may cause tensile strain to develop in aquifer systems, but tensile strain does not definitely mean tensile stress. Where earth fissures are concerned, the stress state should be adopted in numerical simulations instead of the strain state and displacement. The numerical simulation undertaken for the Wuxi area shows that the zone of tensile strain occupies a large area on the ground surface; nevertheless, the zone of tensile stress is very limited. The zone of tensile stress often occurs near the ground surface, beneath which the depth to the bedrock surface is relatively small and has considerable variability. Earth fissures often initiate near the ground surface where tensile stress occurs. Tensile stress and earth fissures rarely develop at the centers of land subsidence bowls, where compressive stress is dominant.

A comparison between three different pit and fissure sealants with regard to marginal integrity.

PubMed

Fernandes, Kristlee Sabrin; Chalakkal, Paul; de Ataide, Ida de Noronha; Pavaskar, Rajdeep; Fernandes, Precylia Philo; Soni, Harleen

2012-04-01

THE AIM OF THIS STUDY IS TO COMPARE THE OCCURRENCE OF ENAMEL FRACTURES, SEALANT FRACTURES AND MARGINAL FISSURES AFTER PLACEMENT OF THREE SEALANTS: Helioseal F, Conseal F and Clinpro. Thirty individuals between 13 and 15 years of age, diagnosed with pit and fissure caries by visual and DIAGNOdent examination, were chosen for sealant placement on their mandibular molars. The sealants were placed at random, after which, impressions were made with polyvinyl siloxane and casts were fabricated. Dies were prepared, each of which were sputter coated with gold in order to be examined under a scanning electron microscope. The following morphologies were analyzed from dies from each of the sealant groups: Continuous margins, sealant fractures, marginal fissures and enamel fractures. After six months, they were recalled for impression making. Dies were prepared and microscopically analyzed as mentioned. Based on the time of evaluation, there were two groups: Initial group (soon after placement) and final group (after six months). Statistical analysis was done using the paired 't' test and One-way analysis of variance (ANOVA). Clinpro had the greatest fracture resistance, followed by Conseal F and Helioseal F. The occurrence of marginal fissure was found to be least with Clinpro.

[Diagnosis and surgical treatment of intraparenchymal sylvian fissure meningioma].

PubMed

Zheng, Jian; Wang, Shuo; Zhao, Ji-Zong; Cao, Yong

2009-09-08

To describe the characteristics of patients diagnosed with intraparenchymal sylvian meningioma at our department. A retrospective review was performed over 5 patients with intraparenchymal sylvian fissure meningioma confirmed by histopathology and receiving treatment at our department during January 1997 to September 2008. The mean age was 19.4 years old and there were 3 males and 2 females. On CT scanning, intraparenchymal sylvian meningioma was iso- or slightly hyper-dense masses. On MR imaging, tumors showed iso- or hypo- intense signal on T1WI and hyperintense signal on T2WI. After contrast enhancement, T1-weighted images revealed well-demarcated enhancing masses and intimately associated with the middle cerebral artery and its branches in the sylvian fissure. All the patients underwent craniotomy. As a rare disease with radiographic characteristics similar to those of general meningiomas, intraparenchymal sylvian fissure meningioma does not adhere to the dura matter but adhere to or even encase the middle cerebral artery and its branches in the sylvian fissure. All of the above have differential values. During the surgical procedures, a proper handling of tumor and encompassed main trunk of middle cerebral artery and its branches is crucial to patient prognosis.

Fissure sealant materials: Wear resistance of flowable composite resins.

PubMed

Asefi, Sohrab; Eskandarion, Solmaz; Hamidiaval, Shadi

2016-01-01

Background. Wear resistance of pit and fissure sealant materials can influence their retention. Wear characteristics of sealant materials may determine scheduling of check-up visits. The aim of this study was to compare wear resistance of two flowable composite resins with that of posterior composite resin materials. Methods. Thirty-five disk-shaped specimens were prepared in 5 groups, including two flowable composite resins (Estelite Flow Quick and Estelite Flow Quick High Flow), Filtek P90 and Filtek P60 and Tetric N-Ceram. The disk-shaped samples were prepared in 25-mm diameter by packing them into a two-piece aluminum mold and then light-cured. All the specimens were polished for 1minute using 600-grit sand paper. The samples were stored in distilled water at room temperature for 1 week and then worn by two-body abrasion test using "pin-on-disk" method (with distilled water under a 15-Nload at 0.05 m/s, for a distance of 100 meter with Steatite ceramic balls antagonists). A Profilometer was used for evaluating the surface wear. Data were analyzed with the one-way ANOVA. Results. Estelite Flow Quick exhibited 2708.9 ± 578.1 μm(2) and Estelite Flow Quick High Flow exhibited 3206 ± 2445.1 μm(2)of wear but there were no significant differences between the groups. They demonstrated similar wear properties. Conclusion. Estelite flowable composite resins have wear resistance similar to nano- and micro-filled and micro-hybrid composite resins. Therefore, they can be recommended as pit and fissure sealant materials in the posterior region with appropriate mechanical characteristics.

Fissure sealant materials: Wear resistance of flowable composite resins

PubMed Central

Asefi, Sohrab; Eskandarion, Solmaz; Hamidiaval, Shadi

2016-01-01

Background. Wear resistance of pit and fissure sealant materials can influence their retention. Wear characteristics of sealant materials may determine scheduling of check-up visits. The aim of this study was to compare wear resistance of two flowable composite resins with that of posterior composite resin materials. Methods. Thirty-five disk-shaped specimens were prepared in 5 groups, including two flowable composite resins (Estelite Flow Quick and Estelite Flow Quick High Flow), Filtek P90 and Filtek P60 and Tetric N-Ceram. The disk-shaped samples were prepared in 25-mm diameter by packing them into a two-piece aluminum mold and then light-cured. All the specimens were polished for 1minute using 600-grit sand paper. The samples were stored in distilled water at room temperature for 1 week and then worn by two-body abrasion test using "pin-on-disk" method (with distilled water under a 15-Nload at 0.05 m/s, for a distance of 100 meter with Steatite ceramic balls antagonists). A Profilometer was used for evaluating the surface wear. Data were analyzed with the one-way ANOVA. Results. Estelite Flow Quick exhibited 2708.9 ± 578.1 μm2 and Estelite Flow Quick High Flow exhibited 3206 ± 2445.1 μm2of wear but there were no significant differences between the groups. They demonstrated similar wear properties. Conclusion. Estelite flowable composite resins have wear resistance similar to nano- and micro-filled and micro-hybrid composite resins. Therefore, they can be recommended as pit and fissure sealant materials in the posterior region with appropriate mechanical characteristics. PMID:27651887

Modelisation des emissions de particules microniques et nanometriques en usinage

NASA Astrophysics Data System (ADS)

Khettabi, Riad

La mise en forme des pieces par usinage emet des particules, de tailles microscopiques et nanometriques, qui peuvent etre dangereuses pour la sante. Le but de ce travail est d'etudier les emissions de ces particules pour fins de prevention et reduction a la source. L'approche retenue est experimentale et theorique, aux deux echelles microscopique et macroscopique. Le travail commence par des essais permettant de determiner les influences du materiau, de l'outil et des parametres d'usinage sur les emissions de particules. E nsuite un nouveau parametre caracterisant les emissions, nomme Dust unit , est developpe et un modele predictif est propose. Ce modele est base sur une nouvelle theorie hybride qui integre les approches energetiques, tribologiques et deformation plastique, et inclut la geometrie de l'outil, les proprietes du materiau, les conditions de coupe et la segmentation des copeaux. Il ete valide au tournage sur quatre materiaux: A16061-T6, AISI1018, AISI4140 et fonte grise.

The Influence of Roentgen Radiation and Thermic Neutrons Upon Cereals and Corn; L'INFLUENCE DE L'IRRADIATION AVEC DES RAYONS X ET DES NEUTRONS THERMIQUES SUR LES GRAINES DE CEREALES ET DE MAIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Priadcenco, Al.; Melacrinos, A.; Avramoaie, P.

1959-10-31

Seeds from several species of wheat, barley, oats, and corn of Rumanian origin were irradiated with different intensities of x radiation and thermal neutrons. The results showed that radiation inhibits the germination of the grains. The plants from the irradiated grains have a slower growth and development, a prolongment of the vegetative cycle, a pronounced sterility, and a greater sensitivity to diseases. The detailed results are tabulated. (J.S.R.)

The effect of Saqez (Pistacia atlantica) ointment on the treatment of nipple fissure and nipple pain in breastfeeding women

PubMed Central

As’adi, Nayereh; Kariman, Nourossadat; Mojab, Faraz; Pourhoseingholi, Mohammad Amin

2017-01-01

Background Nipple fissure is a common problem in breastfeeding women, and the main reason for the early discontinuation of breastfeeding. Objective To determine the effect of Saqez (Pistacia atlantica) ointment on the treatment of nipple fissure and nipple pain in breastfeeding women. Methods This randomized clinical trial was conducted on 100 subjects admitted to the health centers in Tehran, Iran from mid-July to mid-November 2015. The subjects were randomly divided into two equal groups of 50 for the Saqez ointment group and the control group. The subjects were divided into the two groups through random allocation in Excel. The subjects were monitored on day 1, 3 and 7. Data were analyzed in SAS using the Cumulative Logit model and in SPSS-21 using Mann-Whitney, independent-samples t-test, the Chi square and Fisher’s exact test. Results No significant differences were observed between the two groups in terms of their demographic and fertility characteristics. The Cumulative Logit model showed that high levels of nipple fissure and pain were significantly less frequent in the Saqez group compared to the control group (p<0.001). There was about 83% reduction in the severity of fissure and 85 %in the severity of pain in the Saqez group compared to the control group (p<0.001). Conclusion Saqez ointment is more effective in the treatment of nipple fissures and pain than breast milk. As this study was done for the first time, judgment about the conclusive efficacy of Saqez ointment on the nipple fissure, needs further similar studies. Trial registration The trial was registered at the Iranian Registry of Clinical Trials (http://www.irct.ir) with the Irct ID: IRCT2015080723535N1. Funding The authors received no financial support for the research, authorship, and/or publication of this article. PMID:28979728

Enhancing caries resistance in occlusal fissures with a short-pulsed CO2 9.6-μm laser: an in vitro pH-cycling study, preliminary results

NASA Astrophysics Data System (ADS)

Charland, Daniel; Fulton, Crystal; Rechmann, Beate; Hewko, Mark; Featherstone, John; Choo-Smith, Lin-P'ing; Rechmann, Peter

2011-03-01

Treatment of occlusal surfaces with a short-pulsed CO2 9.6 μm wavelength laser has previously been proposed as a method for caries prevention. A sample of 20 extracted human molars were measured before and after demineralizationremineralization pH-cycling with ICDAS II visual inspection, DIAGNOdent, quantitative light-induced fluorescence (QLF), SoproLife in daylight and blue light-induced fluorescence mode, optical coherence tomography (OCT) and polarized Raman spectroscopy (PRS). Per tooth, one fissure was subjected to laser treatment using a short-pulsed CO2 laser at 9.6 μm wavelength with a fluence of 3.5 J/cm2, 20 Hz pulse repetition rate, 20 μs pulse duration, angulated handpiece, and focus diameter of 600 μm, while the other fissure was left untreated as control. The teeth were subjected to a demineralization-remineralization pH-cycling for 9 days. Cross-sectional micro-hardness testing was done as a gold standard to compare results with findings from the other detection methods used. Due to the small sample size reported, the trend observed was that laser treated fissures demonstrated a smaller relative mineral loss ▵Z than the controls. QLF findings followed a similar trend. Using a rotary catheter probe, OCT measurements were acquired from the various fissures to generate circularly mapped OCT depth images. PRS measurements of parallel- and cross-polarized spectra were acquired with a Raman microscope system. Preliminary OCT images showed differences in the initial air-tooth interface, with PRS results indicating a change in the surface property along with biochemical alterations after pH-cycling. Following pH-cycling, an increase in the OCT subsurface light backscattering intensity in the control fissures was observed compared to the laser test fissures. Porphyrin based fluorescence methods like DIAGNOdent and SoproLife, respectively demonstrated only additional light scattering due to the demineralization process.

Medical and surgical treatment of haemorrhoids and anal fissure in Crohn’s disease: a critical appraisal

PubMed Central

2013-01-01

Background The principle to avoid surgery for haemorrhoids and/or anal fissure in Crohn’s disease (CD) patients is still currently valid despite advances in medical and surgical treatments. In this study we report our prospectively recorded data on medical and surgical treatment of haemorrhoids and anal fissures in CD patients over a period of 8 years. Methods Clinical data of patients affected by perianal disease were routinely and prospectively inserted in a database between October 2003 and October 2011 at the Department of Surgery, Tor Vergata University Hospital, Rome. We reviewed and divided in two groups records on CD patients treated either medically or surgically according to the diagnosis of haemorrhoids or anal fissures. Moreover, we compared in each group the outcome in patients with prior diagnosis of CD and in patients diagnosed with CD only after perianal main treatment. Results Eighty-six CD patients were included in the study; 45 were treated for haemorrhoids and 41 presented with anal fissure. Conservative approach was initially adopted for all patients; in case of medical treatment failure, the presence of stable intestinal disease made them eligible for surgery. Fifteen patients underwent haemorrhoidectomy (open 11; closed 3; stapled 1), and two rubber band ligation. Fourteen patients required surgery for anal fissure (Botox ± fissurectomy 8; LIS 6). In both groups we observed high complication rate, 41.2% for haemorrhoids and 57.1% for anal fissure. Patients who underwent haemorrhoidectomy without certain diagnosis of CD had significantly higher risk of complications. Conclusions Conservative treatment of proctologic diseases in CD patients has been advocated given the high risk of complications and the evidence that spontaneous healing may also occur. From these preliminary results a role of surgery is conceivable in high selected patients, but definitve conclusions can’t be made. Further randomized trials are needed to establish the efficacy of the surgical approach, giving therapeutic recommendations and guidelines. PMID:23496835

Medical and surgical treatment of haemorrhoids and anal fissure in Crohn's disease: a critical appraisal.

PubMed

D'Ugo, Stefano; Franceschilli, Luana; Cadeddu, Federica; Leccesi, Laura; Blanco, Giovanna Del Vecchio; Calabrese, Emma; Milito, Giovanni; Di Lorenzo, Nicola; Gaspari, Achille L; Sileri, Pierpaolo

2013-03-11

The principle to avoid surgery for haemorrhoids and/or anal fissure in Crohn's disease (CD) patients is still currently valid despite advances in medical and surgical treatments. In this study we report our prospectively recorded data on medical and surgical treatment of haemorrhoids and anal fissures in CD patients over a period of 8 years. Clinical data of patients affected by perianal disease were routinely and prospectively inserted in a database between October 2003 and October 2011 at the Department of Surgery, Tor Vergata University Hospital, Rome. We reviewed and divided in two groups records on CD patients treated either medically or surgically according to the diagnosis of haemorrhoids or anal fissures. Moreover, we compared in each group the outcome in patients with prior diagnosis of CD and in patients diagnosed with CD only after perianal main treatment. Eighty-six CD patients were included in the study; 45 were treated for haemorrhoids and 41 presented with anal fissure. Conservative approach was initially adopted for all patients; in case of medical treatment failure, the presence of stable intestinal disease made them eligible for surgery. Fifteen patients underwent haemorrhoidectomy (open 11; closed 3; stapled 1), and two rubber band ligation. Fourteen patients required surgery for anal fissure (Botox ± fissurectomy 8; LIS 6). In both groups we observed high complication rate, 41.2% for haemorrhoids and 57.1% for anal fissure. Patients who underwent haemorrhoidectomy without certain diagnosis of CD had significantly higher risk of complications. Conservative treatment of proctologic diseases in CD patients has been advocated given the high risk of complications and the evidence that spontaneous healing may also occur. From these preliminary results a role of surgery is conceivable in high selected patients, but definitve conclusions can't be made. Further randomized trials are needed to establish the efficacy of the surgical approach, giving therapeutic recommendations and guidelines.

The effect of CT technical factors on quantification of lung fissure integrity

NASA Astrophysics Data System (ADS)

Chong, D.; Brown, M. S.; Ochs, R.; Abtin, F.; Brown, M.; Ordookhani, A.; Shaw, G.; Kim, H. J.; Gjertson, D.; Goldin, J. G.

2009-02-01

A new emphysema treatment uses endobronchial valves to perform lobar volume reduction. The degree of fissure completeness may predict treatment efficacy. This study investigated the behavior of a semiautomated algorithm for quantifying lung fissure integrity in CT with respect to reconstruction kernel and dose. Raw CT data was obtained for six asymptomatic patients from a high-risk population for lung cancer. The patients were scanned on either a Siemens Sensation 16 or 64, using a low-dose protocol of 120 kVp, 25 mAs. Images were reconstructed using kernels ranging from smooth to sharp (B10f, B30f, B50f, B70f). Research software was used to simulate an even lower-dose acquisition of 15 mAs, and images were generated at the same kernels resulting in 8 series per patient. The left major fissure was manually contoured axially at regular intervals, yielding 37 contours across all patients. These contours were read into an image analysis and pattern classification system which computed a Fissure Integrity Score (FIS) for each kernel and dose. FIS values were analyzed using a mixed-effects model with kernel and dose as fixed effects and patient as random effect to test for difference due to kernel and dose. Analysis revealed no difference in FIS between the smooth kernels (B10f, B30f) nor between sharp kernels (B50f, B70f), but there was a significant difference between the sharp and smooth groups (p = 0.020). There was no significant difference in FIS between the two low-dose reconstructions (p = 0.882). Using a cutoff of 90%, the number of incomplete fissures increased from 5 to 10 when the imaging protocol changed from B50f to B30f. Reconstruction kernel has a significant effect on quantification of fissure integrity in CT. This has potential implications when selecting patients for endobronchial valve therapy.

Overlapping Ballistic Ejecta Fields: Separating Distinct Blasts at Kings Bowl, Idaho

NASA Astrophysics Data System (ADS)

Borg, C.; Kobs-Nawotniak, S. E.; Hughes, S. S.; Sears, D. W. G.; Heldmann, J. L.; Lim, D. S. S.; Haberle, C. W.; Sears, H.; Elphic, R. C.; Kobayashi, L.; Garry, W. B.; Neish, C.; Karunatillake, S.; Button, N.; Purcell, S.; Mallonee, H.; Ostler, B.

2015-12-01

Kings Bowl is a ~2200ka pit crater created by a phreatic blast along a volcanic fissure in the eastern Snake River Plain (ESRP), Idaho. The main crater measures approximately 80m in length, 30m in width, and 30m in depth, with smaller pits located nearby on the Great Rift fissure, and has been targeted by the FINESSE team as a possible analogue for Cyane Fossae, Mars. The phreatic eruption is believed to have occurred due to the interaction of groundwater with lava draining back into the fissure following a lava lake high stand, erupting already solidified basalt from this and previous ERSP lava flows. The contemporaneous draw back of the lava with the explosions may conceal some smaller possible blast pits as more lava drained into the newly formed pits. Ballistic ejecta from the blasts occur on both sides of the fissure. To the east, the ballistic blocks are mantled by fine tephra mixed with eolian dust, the result of a westerly wind during the explosions. We use differential GPS to map the distribution of ballistic blocks on the west side of the fissure, recording position, percent vesiculation, and the length of 3 mutually perpendicular axes for each block >20cm along multiple transects parallel to the fissure. From the several hundred blocks recorded, we have been able to separate the ballistic field into several distinct blast deposits on the basis of size distributions and block concentration. The smaller pits identified from the ballistic fields correspond broadly to the northern and southern limits of the tephra/dust field east of the fissure. Soil formation and bioturbation of the tephra by sagebrush have obliterated any tephrostratigraphy that could have been linked to individual blasts. The ballistic block patterns at Kings Bowl may be used to identify distinct ejecta groups in high-resolution imagery of Mars or other planetary bodies.

Revisiting dirt cracking as a physical weathering process in warm deserts

NASA Astrophysics Data System (ADS)

Dorn, Ronald I.

2011-12-01

A half century ago C.D. Ollier proposed that insolation-driven temperature changes expand and contract fill in fissures enough to widen cracks, a process that would permit progressively deeper penetration of fissure fills, that would in turn generate a positive feedback of greater and greater strain until desert boulders and bedrock shatters. Although desert physical weathering by "dirt cracking" has occasionally been cited, this hypothesized process remains without support from subsequent research. Here, field observations, electron microscopy, X-ray powder diffraction, particle-size analysis, and laboratory experiments shed new light on dirt cracking. Little clear evidence supports the original notion of expansive pressures from thermal fluctuations. However, mineralogical, high resolution transmission electron microscopy, back-scattered electron microscopy, and experimental evidence support two alternative processes of widening fractures: wetting and drying of fills inside fissures; and the precipitation and remobilization of calcium carbonate. A re-envisioned dirt-cracking wedging process starts with calcium carbonate precipitating in fissures less than 5 μm wide. First precipitation, and then ongoing dissolution of this laminar calcrete, opens enough space for dust to penetrate into these narrow fractures. Wetting of expansive clays in the fissure fill exerts enough pressure to widen and deepen the fissure, allowing the carbonate precipitation process to penetrate even deeper and allowing even more dust to move into a fracture. As the dust infiltrates, its texture changes from a chaotic mix of particles to an alignment of clays parallel to fissure sides. This parallel alignment could increase the efficiency of fill wedging. Ollier's concept of a positive feedback remains supported; each increment of fracture deepening and widening permits more, even deeper infiltration of laminar calcrete and dust. Field and electron microscope observations of rock spalling in the winter of 2010 are consistent with Ollier's hypothesis that dirt cracking is a common physical weathering process in deserts that splits rocks of all different sizes.

Applying psychological theories to evidence-based clinical practice: identifying factors predictive of placing preventive fissure sealants.

PubMed

Bonetti, Debbie; Johnston, Marie; Clarkson, Jan E; Grimshaw, Jeremy; Pitts, Nigel B; Eccles, Martin; Steen, Nick; Thomas, Ruth; Maclennan, Graeme; Glidewell, Liz; Walker, Anne

2010-04-08

Psychological models are used to understand and predict behaviour in a wide range of settings, but have not been consistently applied to health professional behaviours, and the contribution of differing theories is not clear. This study explored the usefulness of a range of models to predict an evidence-based behaviour -- the placing of fissure sealants. Measures were collected by postal questionnaire from a random sample of general dental practitioners (GDPs) in Scotland. Outcomes were behavioural simulation (scenario decision-making), and behavioural intention. Predictor variables were from the Theory of Planned Behaviour (TPB), Social Cognitive Theory (SCT), Common Sense Self-regulation Model (CS-SRM), Operant Learning Theory (OLT), Implementation Intention (II), Stage Model, and knowledge (a non-theoretical construct). Multiple regression analysis was used to examine the predictive value of each theoretical model individually. Significant constructs from all theories were then entered into a 'cross theory' stepwise regression analysis to investigate their combined predictive value. Behavioural simulation - theory level variance explained was: TPB 31%; SCT 29%; II 7%; OLT 30%. Neither CS-SRM nor stage explained significant variance. In the cross theory analysis, habit (OLT), timeline acute (CS-SRM), and outcome expectancy (SCT) entered the equation, together explaining 38% of the variance. Behavioural intention - theory level variance explained was: TPB 30%; SCT 24%; OLT 58%, CS-SRM 27%. GDPs in the action stage had significantly higher intention to place fissure sealants. In the cross theory analysis, habit (OLT) and attitude (TPB) entered the equation, together explaining 68% of the variance in intention. The study provides evidence that psychological models can be useful in understanding and predicting clinical behaviour. Taking a theory-based approach enables the creation of a replicable methodology for identifying factors that may predict clinical behaviour and so provide possible targets for knowledge translation interventions. Results suggest that more evidence-based behaviour may be achieved by influencing beliefs about the positive outcomes of placing fissure sealants and building a habit of placing them as part of patient management. However a number of conceptual and methodological challenges remain.

Treatment algorithm for anal fissure. Consensus document of the Spanish Association of Coloproctology and the Coloproctology Division of the Spanish Association of Surgeons.

PubMed

Arroyo, Antonio; Montes, Elisa; Calderón, Teresa; Blesa, Isabel; Elía, Manuela; Salgado, Gervasio; García-Armengol, Juan; de-la-Portilla, Fernando

2018-03-08

The Spanish Association of Coloproctology and the Coloproctology Division of the Spanish Association of Surgeons propose this consensus document with a treatment algorithm for anal fissure that could be used for decision making. Non-surgical therapy and surgical treatment of anal fissure are explained, and the recommended algorithm is provided. The methodology used was: creation of a group of experts; search in PubMed, MEDLINE and the Cochrane Library for publications from the last 10 years about anal fissure; presentation at the 21st National Meeting of the Spanish Association of Coloproctology Foundation 2017 with voting for/against each conclusion by the attendees and review by the scientific committee of the Spanish Association of Coloproctology. Copyright © 2018 AEC. Publicado por Elsevier España, S.L.U. All rights reserved.

Three-dimensional finite elements for the analysis of soil contamination using a multiple-porosity approach

NASA Astrophysics Data System (ADS)

El-Zein, Abbas; Carter, John P.; Airey, David W.

2006-06-01

A three-dimensional finite-element model of contaminant migration in fissured clays or contaminated sand which includes multiple sources of non-equilibrium processes is proposed. The conceptual framework can accommodate a regular network of fissures in 1D, 2D or 3D and immobile solutions in the macro-pores of aggregated topsoils, as well as non-equilibrium sorption. A Galerkin weighted-residual statement for the three-dimensional form of the equations in the Laplace domain is formulated. Equations are discretized using linear and quadratic prism elements. The system of algebraic equations is solved in the Laplace domain and solution is inverted to the time domain numerically. The model is validated and its scope is illustrated through the analysis of three problems: a waste repository deeply buried in fissured clay, a storage tank leaking into sand and a sanitary landfill leaching into fissured clay over a sand aquifer.

Failure Mechanisms of Brittle Rocks under Uniaxial Compression

NASA Astrophysics Data System (ADS)

Liu, Taoying; Cao, Ping

2017-09-01

The behaviour of a rock mass is determined not only by the properties of the rock matrix, but mostly by the presence and properties of discontinuities or fractures within the mass. The compression test on rock-like specimens with two prefabricated transfixion fissures, made by pulling out the embedded metal inserts in the pre-cured period was carried out on the servo control uniaxial loading tester. The influence of the geometry of pre-existing cracks on the cracking processes was analysed with reference to the experimental observation of crack initiation and propagation from pre-existing flaws. Based on the rock fracture mechanics and the stress-strain curves, the evolution failure mechanism of the fissure body was also analyzed on the basis of exploring the law of the compression-shear crack initiation, wing crack growth and rock bridge connection. Meanwhile, damage fracture mechanical models of a compression-shear rock mass are established when the rock bridge axial transfixion failure, tension-shear combined failure, or wing crack shear connection failure occurs on the specimen under axial compression. This research was of significance in studying the failure mechanism of fractured rock mass.

The effect of Saqez (Pistacia atlantica) ointment on nipple fissure improvement in breastfeeding women during one-month follow-up

PubMed Central

As’adi, Nayereh; Kariman, Nourossadat; Mojab, Faraz; Pourhoseingholi, Mohamad Amin

2017-01-01

Objective: Painful nipple fissure is a troublesome problem for breastfeeding mothers. This study was conducted to evaluate the effect of saqez (Pistacia atlantica) ointment on the improvement of nipple fissure in breastfeeding women during one-month follow-up. Materials and Methods: This randomized controlled clinical trial was conducted on 100 eligible women who visited the selected health centers affiliated to Shahid Beheshti University of Medical Sciences, Tehran, Iran, from July 2015 to December 2015 during their postpartum period. A total of 100 subjects were randomly divided into two equal groups of 50 women grouped as saqez ointment group and breast milk group, and followed-up for one month. Both groups received face-to-face instructions on breastfeeding techniques. For severity of nipple fissure, Storr scale and to measure the intensity of pain, visual analog scale (VAS) were used. Results: The results showed that the two groups were matched in terms of demographic and obstetric characteristics. Mean of nipple fissure severity in ointment group (42.62) was lower than that of the control group (48.02), that was significantly different between the two groups (p=0.047). In addition, Mean nipple pain intensity in ointment group (40.57) was lower than that of the control group (49.81), but there was no significant difference between the two groups (p=0.056). Conclusion: The present study showed that saqez ointment was more effective than breast milk in healing and controlling nipple fissures during one-month follow-up, without resulting in any side effects. PMID:29299430

Comparative study of Ksharasutra suturing and Lord's anal dilatation in the management of Parikartika (chronic fissure-in-ano)

PubMed Central

Dudhamal, Tukaram S.; Baghel, Madhav Singh; Bhuyan, Chaturbhuja; Gupta, Sanjay Kumar

2014-01-01

Background: Parikartika resembles fissure-in-ano which is very common among all ano-rectal disorders. In Ayurvedic texts, Parikartika is described as a complication of Vamana and Virechana as well as complication of Atisara. Ksharasutra was proved successful in the management of fistula-in-ano, piles, and there is a need to try its efficacy in fissure-in-ano. Aim: To evaluate the role of Ksharasutra suturing (KSS) in fissure bed in chronic fissure-in-ano. Materials and Methods: Total 100 patients of chronic fissure-in-ano were selected and randomly divided into two groups (50 in each group). In group-A, patients were undergone by KSS; while in patients of Group-B Lord's anal dilatation followed by KSS was done under spinal anesthesia. The KSS was done once and after slough out of Ksharasutra, the wound was treated for 4 weeks and assessment of the result was done on the basis of gradation adopted. Results: The pain relief on 14th day in Group-A was 86% while in Group-B 100% was observed. As on 7th day in Group-A, oozing was stopped in 68% patients, while in Group-B, oozing was stopped in 82% patients. On 21st day, Group-B showed more healing (85%) as compared to Group-A (69%). In this study 68% of patients were cured. Conclusion: In Group-B (KSS with Lord's anal dilatation) patients were cured early as compared to patients of Group-A (KSS alone). PMID:25558158

Medium-term results of anal advancement flap compared with lateral sphincterotomy for the treatment of anal fissure.

PubMed

Patel, Sanjay D; Oxenham, Tom; Praveen, Bhandhipalyan V

2011-09-01

Anal fissure is associated with anal pain and bleeding. Lateral internal sphincterotomy (LIS) has been a common form of surgical management. This can however cause incontinence and hence an equally effective alternative without this risk would be ideal. Anal fissurectomy and an anal advancement flap (AAF) have been used as an alternative to LIS. We carried out a retrospective analysis of the results of AAF and LIS for the treatment of anal fissure. Fifty patients underwent AAF and a further 50 cases were chosen who had undergone LIS over the same time period. Patient and procedural data were collected including post-operative course. Presenting symptoms included anal pain (94%), rectal bleeding (77%) and constipation (15%). Mean (±SD) follow-up was 20 ± 12 months in the AAF group vs 22 ± 12.5 months in the LIS group. Healing of fissure was achieved in 96% of patients after AAF and 88% after LIS (p = 0.27). Resolution of symptoms was achieved in 90% after AAF and 72% of patients after LIS (p = 0.04). LIS was associated with an increased incidence of readmission with infection and pain (8% vs 4%, p = 0.35). Seven patients whom had undergone successful AAF with complete resolution of symptoms had previously had LIS with failure of symptom relief. There was no incidence of faecal incontinence in either group. AAF is associated with a higher incidence of symptomatic relief and fissure healing and lower incidence of complications when compared with LIS. AAF is effective at healing fissures which are refractory to LIS.

Contribution a la comprehension de la durabilite a l'ecaillage des betons contenant de la cendre volante et du laitier

NASA Astrophysics Data System (ADS)

Houehanou, Ernesto C.

L'incorporation des ajouts cimentaires dans le beton est connue pour ses avantages technologiques et environnementaux. Pour assurer une plus grande utilisation des ajouts cimentaires, il faut accroitre la connaissance dans ce domaine surtout les facteurs relatifs a la durabilite des ouvrages construits avec les betons contenant des ajouts mineraux. Jusqu'a present, la plupart des etudes sur les betons contenant de la cendre volante et du laitier semble s'accorder sur leur moins bonne durabilite a l'ecaillage surtout lorsqu'on les compare au beton ordinaire. Les raisons de cette moins bonne performance ne sont pas toutes connues et cela limite bien des fois l'incorporation de la cendre volante et de laitier dans le beton pour des ouvrages fortement exposes aux cycles de gel-degel en presence de sels fondants. Cette these vise la comprehension des problematiques de la durabilite a l'ecaillage des betons contenant des ajouts cimentaires tels la cendre volante et le laitier. Les objectifs sont de mieux comprendre la representativite et la severite relative des essais normalises ASTM C672 et NQ 2621-900 pour l'evaluation de la durabilite a l'ecaillage de ces betons, d'etudier l'influence de la methode de murissement sur la durabilite a l'ecaillage et d'etudier la relation entre la durabilite a l'ecaillage et la sorptivite des surfaces de beton ainsi que la particularite de la microstructure des betons contenant de la cendre volante. Cinq types de betons a air entraine contenant 25% et 35% de cendre volante et laitier ainsi que 1% et 2% de fumee de silice ont ete produits, muris selon differentes methodes et soumis a des essais acceleres selon les deux procedures normalisees ainsi qu'un essai de sorptivite. Les differentes methodes de murissement sont choisies de facon a mettre en evidence aussi bien l'influence des parametres des essais que celle de la methode de murissement elle-meme. La durabilite en laboratoire des betons testes a ete comparee avec celle de betons similaires apres 4 et 6 annees de service. La microstructure des betons en service a ete analysee au moyen du microscope a balayage electronique (MEB). Les resultats montrent que la qualite du murissement influence grandement la durabilite a l'ecaillage des betons contenant de la cendre volante et de laitier surtout lorsqu'ils sont soumis ' aux essais acceleres en laboratoire. La duree du pretraitement humide est un parametre cle de la durabilite a l'ecaillage des betons testes en laboratoire. Le pretraitement humide correspond a la duree totale du murissement humide (100% HR) et de la periode de presaturation. Pour les deux methodes d'essai, l'allongement du pretraitement humide a 28 jours ameliore la resistance a l'ecaillage de tous les types de betons et en particulier celle des betons avec cendres volantes. Pour les deux methodes d'essai, l'allongement du pretraitement humide a 28 jours ameliore la resistance a l'ecaillage de tous les types de betons et en particulier celle des betons avec cendres volantes. La periode de presaturation de 7 jours de la procedure NQ 2621-900 a un effet similaire a celui d'un murissement humide de meme longueur. Un murissement humide de 28 jours apparait optimal et conduit a une estimation plus realiste de la resistance a l'ecaillage reelle des betons. Pour une meme duree de pretraitement humide, les procedures NQ 2621-900 et ASTM C672 donnent des resultats equivalents. L'utilisation d'un moule a fond drainant n'a pas d'effet sur la resistance a l'ecaillage des betons de cette etude. Bien que le murissement dans l'eau saturee de chaux offre toute l'eau requise pour favoriser le developpement des proprietes du beton et l'amelioration de sa durabilite a l'ecaillage, elle lessive cependant les ions alcalins ce qui diminue defavorablement l'alcalinite et le pH de la solution interstitielle de la pate de ciment pres de la surface exposee. L'utilisation d'un agent de murissement protege mieux les betons contenant de la cendre volante et ameliore significativement leurs resistances a l'ecaillage mais elle a tendance a reduire la durabilite a l'ecaillage des betons contenant de laitier. Pour developper une bonne resistance a l'ecaillage, il est essentiel de produire une surface de beton impermeable qui resiste a la penetration de l'eau externe. La permeabilite et la porosite de la peau du beton sont etroitement liees a la sorptivite. L' allongement de la duree de murissement humide des betons avec ajouts cimentaires diminue systematiquement la sorptivite et ameliore leur durabilite a l'ecaillage, particulierement dans le cas des betons avec cendres volantes. Les resultats montrent qu'il existe une bonne correlation entre les resultats des essais d'ecaillage et les mesures de sorptivite. La correlation etablie entre la sorptivite et la durabilite a l'ecaillage des betons, l'effet • determinant de la carbonatation sur la durabilite a l'ecaillage des betons avec cendres volantes ainsi que l'explication de l'origine de la difference de severite entre les essais ASTM C-672 et NQ 2621-900 sont les contributions scientifiques de cette these. Au plan technique et industriel, elle met en evidence le mode de murissement qui favorise une meilleure durabilite a l'ecaillage des betons et suggere une methode de caracterisation en laboratoire qui ferait une meilleure prediction du comportement en service. Mots cles : Beton, cendre volante, laitier, durabilite, ecaillage, murissement, sorptivite

Allier théorie et pratique dans la lutte contre la pandémie du Sida

PubMed Central

Zerbo, Roger

2014-01-01

Le premier cas d'infection par le VIH a été notifié en 1986 au Burkina Faso. L'ignorance qui entourait cette infection et l'absence de traitement curatif a amplifié ses conséquences sociales et économiques. La mise en œuvre des interventions communautaire est un enjeu majeur actuel qui recommande la compréhension des logiques sociales endogènes qui influencent les comportements individuels et collectifs. C'est en cela que l'implication des sciences sociales dans la lutte contre les maladies, en particulier le Sida constitue un enjeu, en termes de définition et d'identification de leur contribution. Dans notre propos, nous pouvons mettre en évidence trois niveaux de contribution des sciences sociales, notamment la sociologie, l'anthropologie, la psychologie et dans une certaine mesure le droit et l’économie, à la prévention du Sida et la prise en charge des personnes infectées par le VIH. Il faut noter que ces disciplines contribuent à la lutte contre le VIH d'une part, par des réflexions et des éléments d'analyses constructives, et d'autre part, l'aptitude des porteurs de ces disciplines est parfois sollicitée pour l'efficacité de la mise en œuvre des actions et l'organisation des systèmes de soins. PMID:25722761

Comportement instationnaire des thermoéléments à effet Peltier multi-étages

NASA Astrophysics Data System (ADS)

Monchoux, F.; Zély, D.; Cordier, A.

1995-01-01

The analysis of thermoelectric phenomena is possible based on non-equilibrium thermodynamics. Integration of the thermal balance equation leads to an analytical solution for the non-stationnary behaviour. The influence to Thomson effect is commmented. The model, introduced in the complete software TRNSYS, permits the modelling of complex systems including such elements in their thermal regulation. La thermodynamique des processus irréversibles permet l'analyse des phénomènes thermoélectriques. Par intégration de l'équation de bilan thermique, on a obtenu une solution analytique pour le régime non stationnaire donnant la température en tous points et le flux absorbé. On a analysé l'influence de l'effet Thomson. Le modèle a été inclu dans le code plus général TRNSYS qui permet la modélisation de systèmes complexes.

Towards the development of continuous, organocatalytic, and stereoselective reactions in deep eutectic solvents

PubMed Central

Brenna, Davide; Massolo, Elisabetta; Puglisi, Alessandra; Rossi, Sergio; Celentano, Giuseppe; Capriati, Vito

2016-01-01

Different deep eutectic solvent (DES) mixtures were studied as reaction media for the continuous synthesis of enantiomerically enriched products by testing different experimental set-ups. L-Proline-catalysed cross-aldol reactions were efficiently performed in continuo, with high yield (99%), anti-stereoselectivity, and enantioselectivity (up to 97% ee). Moreover, using two different DES mixtures, the diastereoselectivity of the process could be tuned, thereby leading to the formation, under different experimental conditions, to both the syn- and the anti-isomer with very high enantioselectivity. The excess of cyclohexanone was recovered and reused, and the reaction could be run and the product isolated without the use of any organic solvent by a proper choice of DES components. The dramatic influence of the reaction media on the reaction rate and stereoselectivity of the process suggests that the intimate architecture of DESs deeply influences the reactivity of different species involved in the catalytic cycle. PMID:28144332

Validation of the Italian version of the dissociative experience scale for adolescents and young adults.

PubMed

De Pasquale, Concetta; Sciacca, Federica; Hichy, Zira

2016-01-01

The Dissociative Experience Scale for adolescent (A-DES), a 30-item, multidimensional, self-administered questionnaire, was validated using a large sample of American young people sample. We reported the linguistic validation process and the metric validity of the Italian version of A-DES in the Italy. A set of questionnaires was provided to a total of 633 participants from March 2015 to April 2016. The participants consisted of 282 boys and 351 girls, and their average age was between 18 and 24 years old. The translation process consisted of two consecutive steps: forward-backward translation and acceptability testing. The psychometric testing was applied to Italian students who were recruited from the Italian Public Schools and Universities in Sicily. Informed consent was obtained from all participants at the research. All individuals completed the A-DES. Reliability and validity were tested. The translated version was validated on a total of 633 Italian students. The reliability of A-DES total is .926. It is composed by 4 subscales: Dissociative amnesia, Absorption and imaginative involvement, Depersonalization and derealization, and Passive influence. The reliability of each subscale is: .756 for dissociative amnesia, .659 for absorption and imaginative involvement, .850 for depersonalization and derealization, and .743 for passive influence. The Italian version of the A-DES constitutes a useful instrument to measure dissociative experience in adolescents and young adults in Italy.

Influence of skin ageing features on Chinese women's perception of facial age and attractiveness

PubMed Central

Porcheron, A; Latreille, J; Jdid, R; Tschachler, E; Morizot, F

2014-01-01

Objectives Ageing leads to characteristic changes in the appearance of facial skin. Among these changes, we can distinguish the skin topographic cues (skin sagging and wrinkles), the dark spots and the dark circles around the eyes. Although skin changes are similar in Caucasian and Chinese faces, the age of occurrence and the severity of age-related features differ between the two populations. Little is known about how the ageing of skin influences the perception of female faces in Chinese women. The aim of this study is to evaluate the contribution of the different age-related skin features to the perception of age and attractiveness in Chinese women. Methods Facial images of Caucasian women and Chinese women in their 60s were manipulated separately to reduce the following skin features: (i) skin sagging and wrinkles, (ii) dark spots and (iii) dark circles. Finally, all signs were reduced simultaneously (iv). Female Chinese participants were asked to estimate the age difference between the modified and original images and evaluate the attractiveness of modified and original faces. Results Chinese women perceived the Chinese faces as younger after the manipulation of dark spots than after the reduction in wrinkles/sagging, whereas they perceived the Caucasian faces as the youngest after the manipulation of wrinkles/sagging. Interestingly, Chinese women evaluated faces with reduced dark spots as being the most attractive whatever the origin of the face. The manipulation of dark circles contributed to making Caucasian and Chinese faces being perceived younger and more attractive than the original faces, although the effect was less pronounced than for the two other types of manipulation. Conclusion This is the first study to have examined the influence of various age-related skin features on the facial age and attractiveness perception of Chinese women. The results highlight different contributions of dark spots, sagging/wrinkles and dark circles to their perception of Chinese and Caucasian faces. Résumé Objectifs Le vieillissement entraine des changements caractéristiques de l'apparence de la peau du visage. Parmi ces changements on distingue les éléments topographiques (relâchement de la peau et rides), les taches brunes et les cernes sur le contour de l'œil. Bien que ces modifications cutanées avec l'âge soient similaires pour les visages caucasiens et chinois; leur âge d'apparition et leur degré de sévérité varient entre ces deux populations. Il y a très peu d'informations disponibles liées à l'influence du vieillissement cutané sur la perception des visages féminins par les femmes chinoises. L'objectif de cette étude est d'évaluer la contribution des différents signes de vieillissement à la perception de l'âge et d'attirance chez ces femmes. Methodes Des photos de visages de femmes caucasiennes et chinoises d'environ 60 ans ont été manipulées de façon à réduire séparément les signes suivants: (i) le relâchement de la peau et les rides, (ii) les taches brunes, et (iii) les cernes. Enfin, tous les signes ont été atténués ensemble (iv). Des participantes chinoises ont estimé, à partir de ces photos, l'écart d'âge entre la version originale et chaque version modifiée; elles ont également évalué l'attirance des visages originaux et modifiés. Resultats Les femmes chinoises ont jugé les visages chinois plus jeunes après correction des taches qu'après correction des rides/relâchement, alors que les visages caucasiens ont été perçus les plus jeunes après correction des rides/relâchement. Les femmes chinoises ont jugé que les visages avec correction des taches étaient les plus attirants quelle que soit l'origine du visage. La manipulation des cernes a entraîné un rajeunissement des 2 types de visages et les a rendus plus attirants, même si l'effet observé était moindre que pour les autres corrections. Conclusion Il s'agit de première étude qui examine l'influence de plusieurs signes de vieillissement cutanés sur la perception de l'âge et de l'attirance des visages par les femmes chinoises. Les résultats mettent en évidence que les taches, les rides/relâchement et les cernes contribuent différemment à leur perception des visages chinois et caucasiens. PMID:24712710

A Volcanic Fissure

NASA Image and Video Library

2017-04-26

Although Mars is known for having the largest volcano in our solar system, Olympus Mons, we also find small-scale volcanic features on its surface, as shown in this image from HiRISE onboard NASA's Mars Reconnaissance Orbiter (MRO). This fissure, less than 500 meters across at its widest point, lies in the Tharsis region and is believed to be a vent from which lava flowed in ancient eruptions. The total volume of lava released from this fissure is much less than what would erupt from nearby volcanoes, but the mark left on the landscape is dramatic nonetheless. https://photojournal.jpl.nasa.gov/catalog/PIA21601

New type of brittle deformations: two-axial turn structure of fractures in the Kovdor carbonatite intrusion (NW Russia)

NASA Astrophysics Data System (ADS)

Zhirov, Dmitry

2017-04-01

The Earth's crust is known for a few types of structural fissuring and faults organization. First of all, this is an orthogonal or some kind of non-orthogonal fissuring network with a various number of systems. The hierarchic model is also popular since it stipulates a regular arrangement and collateral subordination of several ranks of elements relative to each other, and a general fault and/or shear zone. An axis-symmetric fissuring structure is developed in the central (ring)-type massifs and some other geological bodies. It is formed due to the progressive turn of adjoining fissure planes around the massif symmetry axis (mostly vertical) at a discrete angle (within 5-15° on the average depending on the scale and internal structural features). The investigation of the fault tectonics in the Kovdor carbonatite intrusion (NW Russia) has resulted in the identification of a new brittle deformations type. It is formed due to the simultaneous turn of fissure planes at discrete angles around two orthogonal guiding lines (axes), where one is represented by a vertical massif symmetry axis (L1), and the other axis (L2) lies horizontally in the fracture plane. Nonetheless, the rotation along the both axes is codirectional, i.e., when moving counterclockwise around the L1 axis, the L2 rotation is also counterclockwise. If we very tentatively consider a fissure as an ellipse, and take into account the whole assemblage of long and short axes, the overall picture of their spatial distribution generates a screw conoid or ordinary helicoid type structure. It will be shown as an S-shaped plane poles chain in the stereogram. A sequence of large scale fissures (longer than 100 meters), which are 25 to 100 meters apart from each other and regularly vary in strike and dip angle, is mapped in the open pit of the Kovdor apatite-magnetite deposit. The accuracy of positioning for each fissure is a few centimeters in measurement spots, with a deviation from its actual surface due to the undulation induced by the generalized plane estimated at ±1 meter. The poles of the mapped planes are plotted in the stereogram and compared with model calculations while the planes themselves are visualized in a 3D model. The behavior of the fissure selection in the stereogram and in the 3D model fully corresponds to the laws of two-axial codirectional turn of fractures. This is a new type of brittle deformations, which is of significance for the interpretation of evolutional features and modern state of the stress field in the Kovdor central-type carbonatite intrusion.

The Transcription Factor Foxg1 Promotes Optic Fissure Closure in the Mouse by Suppressing Wnt8b in the Nasal Optic Stalk

PubMed Central

Smith, Rowena; Huang, Yu-Ting; Tian, Tian; Vojtasova, Dominika; Mesalles-Naranjo, Oscar; Price, David J.

2017-01-01

During vertebrate eye morphogenesis, a transient fissure forms at its inferior part, known as the optic fissure. This will gradually close, giving rise to a healthy, spherical optic cup. Failure of the optic fissure to close gives rise to an ocular disorder known as coloboma. During this developmental process, Foxg1 is expressed in the optic neuroepithelium, with highest levels of expression in the nasal optic stalk. Foxg1−/− mutant mice have microphthalmic eyes with a large ventral coloboma. We found Wnt8b expression upregulated in the Foxg1−/− optic stalk and hypothesized that, similar to what is observed in telencephalic development, Foxg1 directs development of the optic neuroepithelium through transcriptional suppression of Wnt8b. To test this, we generated Foxg1−/−;Wnt8b−/− double mutants of either sex and found that the morphology of the optic cup and stalk and the closure of the optic fissure were substantially rescued in these embryos. This rescue correlates with restored Pax2 expression in the anterior tip of the optic fissure. In addition, although we do not find evidence implicating altered proliferation in the rescue, we observe a significant increase in apoptotic cell density in Foxg1−/−;Wnt8b−/− double mutants compared with the Foxg1−/− single mutant. Upregulation of Wnt/β-catenin target molecules in the optic cup and stalk may underlie the molecular and morphological defects in the Foxg1−/− mutant. Our results show that proper optic fissure closure relies on Wnt8b suppression by Foxg1 in the nasal optic stalk to maintain balanced apoptosis and Pax2 expression in the nasal and temporal edges of the fissure. SIGNIFICANCE STATEMENT Coloboma is an ocular disorder that may result in a loss of visual acuity and accounts for ∼10% of childhood blindness. It results from errors in the sealing of the optic fissure (OF), a transient structure at the bottom of the eye. Here, we investigate the colobomatous phenotype of the Foxg1−/− mutant mouse. We identify upregulated expression of Wnt8b in the optic stalk of Foxg1−/− mutants before OF closure initiates. Foxg1−/−;Wnt8b−/− double mutants show a substantial rescue of the Foxg1−/− coloboma phenotype, which correlates with a rescue in molecular and cellular defects of Foxg1−/− mutants. Our results unravel a new role of Foxg1 in promoting OF closure providing additional knowledge about the molecules and cellular mechanisms underlying coloboma formation. PMID:28729440

Work/Family Balancing and 24/7 Work Schedules: Network Analysis of Strategies in a Transport Company Cleaning Service: Concilier travail-famille et horaires 24/7: analyse réseau des stratégies au sein du service de nettoyage d'une compagnie de transport.

PubMed

Lefrançois, Mélanie; Saint-Charles, Johanne; Riel, Jessica

2017-11-01

Whether or not official work/family balance measures exist within an organization, scheduling accommodations often go through informal channels involving colleagues and superiors and are negotiated within interpersonal relationships. This study examines the relationship dimensions of the scheduling strategies of cleaners working atypical hours in the transport sector through the lenses of ergonomic activity, network, and gender analyses. Using semi-directed interviews, observation, and network analysis, we revealed the effect of gender on relationship dynamics and the influence of these dynamics on work/family balance strategies deployed by cleaners. One of the main contributions of this study is to demonstrate the decisive effect of relationships by revealing inequalities in access to organizational social networks. Creating spaces to discuss work/family balancing and a more equitable circulation of information could contribute to reducing inequalities associated with gender, social status, and family responsibilities and support the work/family strategies developed by workers dealing with restrictive work schedules. Résumé Les accommodements du temps de travail pour la conciliation travail-famille (CTF) passent souvent par des ententes informelles qui s'inscrivent dans les relations entre collègues ou avec des gestionnaires. Notre étude, intégrant l'ergonomie et la communication dans une perspective de genre, porte sur les dimensions relationnelles des stratégies de choix d'horaire d'agentes et agents de nettoyage devant composer avec des horaires atypiques dans le secteur des transports. À partir d'entretiens semi-dirigés, d'observations et d'analyse de réseaux, nous avons pu observer l'influence des dynamiques relationnelles, notamment de genre, sur les stratégies de CTF. Un apport central de cette étude est de montrer l'effet structurant des relations en révélant notamment des inégalités dans l'accès aux ressources facilitant le choix d'horaire, mais aussi dans l'inclusion au sein du réseau de relations. L'article conclut en proposant des pistes de solutions concrètes pour la réduction de ces inégalités.

Five Themes Impacting Collaboration in a Joint Interagency Multinational Public Operational Context (Les cinq Facteurs Influencant la Collaboration en Contexte Operationnel Interarmees, Interorganisationnel, Multinational et Public)

DTIC Science & Technology

2011-03-01

cited by the Director of Land Concepts and Designs as an important enabler for the Army of Tomorrow operating concept of adaptive dispersed operations...2010). La partie 1.3 porte sur l’influence du pouvoir sur la collaboration. Étant donné l’ampleur des FC comparativement à celle de la plupart des...Multinational Public (JIMP) operating environment, the capacity to be "JIMP-capable" is now cited by the Director of Land Concepts and Designs as an important

Factors Influencing Manual Performance in Cold Water Diving

DTIC Science & Technology

2008-04-01

montrent que « l’engourdissement » n’avait pas d’incidence sur la dextérité à une profondeur de 40 m (p > 0,05). Dans l’eau à 25 ºC, les gants en ...sensibilité tactile et la dextérité proprement dite. Le rendement ( en anglais performance ou p) a été évalué à des profondeurs de 0,4 m et de 40 m, avec...communication et d’affichage fait en sorte que l’aptitude des plongeurs à utiliser des systèmes de commande complexes constitue un facteur important de la

Nouveaux supraconducteurs à haute température critique à base de mercure

NASA Astrophysics Data System (ADS)

Michel, C.; Hervieu, M.; Martin, C.; Maignan, A.; Pelloquin, D.; Goutenoire, F.; Huvé, M.; Raveau, B.

1994-11-01

Structural and superconducting properties of new cations substituted mercury based oxides are described. They are mainly characterized by [ Hg{1-x}MxOδ] infty monolayers, however a compound with doubled [ Hg{1-x}MxOδ] infty layer is described for the first time. Critical temperatures vary in a large range 0leqslant T_cleqslant 130 K, but they are lower than those of related to pure mercury oxides. The influence of annealings in various atmospheres upon T_c is discussed. Les caractéristiques structurales et supraconductrices de nouveaux oxydes à base de mercure, dans lesquels le mercure est partiellement remplacé par un autre cation, sont décrites. Dans la majorité des cas, ces oxydes sont caractérisés par une monocouche [ Hg{1-x}MxOδ] infty ; cependant, pour la première fois un composé contenant une double couche majoritaire en mercure est isolé. Les températures critiques varient dans un large domaine (0-130 K) mais restent inférieures à celles des oxydes parents ll tout mercure gg. L'influence des recuits sous des atmosphères diverses est discutée.

Sealing effectiveness of fissure sealant bonded with universal adhesive systems on saliva-contaminated and noncontaminated enamel

PubMed Central

Shafiei, Fereshteh; Zarean, Mehran; Razmjoei, Faranak

2018-01-01

Background The effectiveness of sealants is dependent upon their adhesion to enamel surface. The aim of the study was to evaluate the sealing ability of a pit and fissure sealant used with a universal adhesive (etch-and-rinse vs. self-etch modes) when the site is contaminated with saliva. Adhesive properties were evaluated as microleakage and scanning electron microscopic (SEM) characteristics. Material and Methods A total of 72 mandibular third molars were randomly divided into 6 groups (n=12). Occlusal pits and fissures were sealed with an unfilled resin fissure sealant (FS) material with or without saliva contamination. The groups included: 1) phosphoric acid etching + FS (control), 2) phosphoric acid etching + Scotchbond Universal (etch-and-rinse) + FS, 3) phosphoric acid etching + saliva + Scotchbond Universal (etch-and-rinse) + FS, 4) Scotchbond Universal (self-etching) + FS,5) Scotchbond Universal (self-etching) + saliva + FS, and 6) Scotchbond Universal (self-etching) + saliva + Scotchbond Universal + FS. After thermocycling, the teeth were placed in 0.5% fuchsin, sectioned, and evaluated by digital microscopy. Two samples from each group were also observed by SEM. The data were analyzed with Kruskal-Wallis and Mann-Whitney tests for a significance of p<0.05. Results There were significant differences among groups. Groups 1,2 and 4 showed the least microleakage, with no significant differences among groups. Saliva contamination led to increased microleakage and gap formation in SEM images in groups 3, 5 and 6. Conclusions The fissure sealing ability of the universal adhesive in etch-and-rinse or self-etch modes was similar to that of conventional acid etching. Saliva contamination had a negative effect on sealant adhesion to pretreated enamel. Key words:Pit and fissure sealant, Universal adhesive, Saliva. PMID:29670708

Endosonographic and manometric evaluation of internal anal sphincter in patients with chronic anal fissure and its correlation with clinical outcome after topical glyceryl trinitrate therapy.

PubMed

Pascual, Marta; Pera, Miguel; Courtier, Ricard; Gil, Mariá José; Parés, David; Puig, Sonia; Andreu, Montserrat; Grande, Luis

2007-08-01

Anorectal pressure studies have demonstrated internal anal sphincter (IAS) hypertonia in patients with chronic anal fissure. It is unknown however, if these changes in IAS function are associated with any abnormality in sphincter morphology. The first aim was to investigate the clinical characteristics and the manometric and endosonographic findings of the IAS in a cohort of patients with chronic anal fissure. The second aim was to investigate the association between these findings and the outcome with topical Glyceryl trinitrate (GTN) therapy. All patients who presented with chronic anal fissure from November 1999 to May 2004 were included after failure of conservative therapy. Anorectal manometry and anal endosonography were performed before treatment with 0.2% GTN ointment twice daily was initiated. Patients were evaluated after 8 weeks. One hundred and twenty-four patients (66 women, mean age, 45.2 +/- 14.8 years) were included. Hypertonia of the IAS was found in 84 (68%) patients. The mean maximum IAS thickness was 3.6 +/- 0.76 mm (1.6-5.5). An abnormally thick IAS, adjusted by age, was observed in 113 (91.1%) patients. We found no correlation between resting pressure and IAS thickness (r = 0.074; p = 0.41). At 8 weeks, 52 patients (42%) had healed with complete symptoms resolution. No statistically significant differences were observed when clinical features and manometric and endosonographic findings were compared between healing and no-healing fissures. The majority of patients with chronic anal fissure present an abnormally thick IAS. Clinical, manometric and endosonographic features had no association with outcome after GTN treatment.

Sealing effectiveness of fissure sealant bonded with universal adhesive systems on saliva-contaminated and noncontaminated enamel.

PubMed

Memarpour, Mahtab; Shafiei, Fereshteh; Zarean, Mehran; Razmjoei, Faranak

2018-01-01

The effectiveness of sealants is dependent upon their adhesion to enamel surface. The aim of the study was to evaluate the sealing ability of a pit and fissure sealant used with a universal adhesive (etch-and-rinse vs. self-etch modes) when the site is contaminated with saliva. Adhesive properties were evaluated as microleakage and scanning electron microscopic (SEM) characteristics. A total of 72 mandibular third molars were randomly divided into 6 groups (n=12). Occlusal pits and fissures were sealed with an unfilled resin fissure sealant (FS) material with or without saliva contamination. The groups included: 1) phosphoric acid etching + FS (control), 2) phosphoric acid etching + Scotchbond Universal (etch-and-rinse) + FS, 3) phosphoric acid etching + saliva + Scotchbond Universal (etch-and-rinse) + FS, 4) Scotchbond Universal (self-etching) + FS,5) Scotchbond Universal (self-etching) + saliva + FS, and 6) Scotchbond Universal (self-etching) + saliva + Scotchbond Universal + FS. After thermocycling, the teeth were placed in 0.5% fuchsin, sectioned, and evaluated by digital microscopy. Two samples from each group were also observed by SEM. The data were analyzed with Kruskal-Wallis and Mann-Whitney tests for a significance of p <0.05. There were significant differences among groups. Groups 1,2 and 4 showed the least microleakage, with no significant differences among groups. Saliva contamination led to increased microleakage and gap formation in SEM images in groups 3, 5 and 6. The fissure sealing ability of the universal adhesive in etch-and-rinse or self-etch modes was similar to that of conventional acid etching. Saliva contamination had a negative effect on sealant adhesion to pretreated enamel. Key words: Pit and fissure sealant, Universal adhesive, Saliva.

A Novel Approach to Model Earth Fissure Caused by Extensive Aquifer Exploitation and its Application to the Wuxi Case, China

NASA Astrophysics Data System (ADS)

Ye, Shujun; Franceschini, Andrea; Zhang, Yan; Janna, Carlo; Gong, Xulong; Yu, Jun; Teatini, Pietro

2018-03-01

Initially observed in the semiarid basins of southwestern USA, earth fissures due to aquifer over-exploitation are presently threatening a large number of subsiding basins in various countries worldwide. Different mechanics have been proposed to explain this process, such as differential compaction, horizontal movements, and fault reactivation. Numerical modeling and prediction of this major geohazard caused by overuse of groundwater resources are challenging because of two main requirements: shifting from the classical continuous to discontinuous geomechanics and incorporating two-dimensional features (the earth fissures) into large three-dimensional (3-D) modeling domain (the subsiding basin). In this work, we proposed a novel modeling approach to simulate earth fissure generation and propagation in 3-D complex geological settings. A nested two-scale approach associated with an original nonlinear elastoplastic finite element/interface element simulator allows modeling the mechanics of earth discontinuities, in terms of both sliding and opening. The model is applied on a case study in Wuxi, China, where groundwater pumping between 1985 and 2004 has caused land subsidence larger than 2 m. The model outcomes highlight that the presence of a shallow (˜80 m deep) bedrock ridge crossing the Yangtze River delta is the key factor triggering the earth fissure development in this area. Bending of the alluvial deposits around the ridge tip and shear stress due to the uneven piezometric change and asymmetrical shape of the bedrock have caused the earth fissure to onset at the land surface and propagate downward to a maximum depth of about 20-30 m. Maximum sliding and opening are computed in the range of 10-40 cm, in agreement with the order of magnitude estimated in the field.

Transport de paires EPR dans des structures mesoscopiques

NASA Astrophysics Data System (ADS)

Dupont, Emilie

Dans cette these, nous nous sommes particulierement interesses a la propagation de paires EPR1 delocalisees et localisees, et a l'influence d'un supraconducteur sur le transport de ces paires. Apres une introduction de cette etude, ainsi que du cadre scientifique qu'est l'informatique quantique dans lequel elle s'inscrit, nous allons dans le chapitre 1 faire un rappel sur le systeme constitue de deux points quantiques normaux entoures de deux fils supraconducteurs. Cela nous permettra d'introduire une methode de calcul qui sera reutilisee par la suite, et de trouver egalement le courant Josephson produit par ce systeme transforme en SQUID-dc par l'ajout d'une jonction auxiliaire. Le SQUID permet de mesurer l'etat de spin (singulet ou triplet), et peut etre forme a partir d'autres systemes que nous etudierons ensuite. Dans le chapitre 2, nous rappellerons l'etude detaillee d'un intricateur d'Andreev faite par un groupe de Bale. La matrice T, permettant d'obtenir le courant dans les cas ou les electrons sont separes spatialement ou non, sera etudiee en detail afin d'en faire usage au chapitre suivant. Le chapitre 3 est consacre a l'etude de l'influence du bruit sur le fonctionnement de l'intricateur d'Andreev. Ce bruit modifie la forme du courant jusqu'a aboutir a d'autres conditions de fonctionnement de l'intricateur. En effet, le bruit present sur les points quantiques peut perturber le transport des paires EPR par l'intermediaire des degres de liberte. Nous montrerons que, du fait de l'"intrication" entre la charge de la paire et le bruit, la paire est detruite pour des temps longs. Cependant, le resultat le plus important sera que le bruit perturbe plus le transport des paires delocalisees, qui implique une resonance de Breit-Wigner a deux particules. Le transport parasite n'implique pour sa part qu'une resonance de Breit-Wigner a une particule. Dans le chapitre 4, nous reviendrons au systeme constitue de deux points quantiques entoures de deux fils supraconducteurs, mais ici, les deux points quantiques seront aussi supraconducteurs. On obtiendra alors l'hamiltonien effectif de la meme maniere que precedemment ainsi que la forme du courant. Dans le cas ou la tension entre les deux fils est nulle, nous ferons une comparaison avec l'experience et nous verrons que les resultats obtenus sont plus en accord avec celle-ci si on fait l'hypothese de la presence d'un bain, qui va modeliser le bruit sur l'un des fils. Enfin, dans le dernier chapitre, nous utiliserons a la fois un qubit de charge et un qubit de spin entoures par deux fils supraconducteurs. Nous pourrons alors mesurer l'influence du supraconducteur et voir s'il est possible de creer ici des paires d'electrons intriques et d'aboutir a un pendule quantique. 1Il existe des systemes qui produisent des paires de particules ejectees simultanement dans des directions opposees et qui permettent de tester le paradoxe d' Einstein, Podolsky, Rosen. Chaque particule de la paire est dans un etat indetermine. Si on mesure les etats respectifs des deux particules, on obtient systematiquement des resultats complementaires, soit de facon aleatoire: 0-1 ou 1-0. La mecanique quantique explique que les deux particules ainsi produites constituent un seul systeme, une paire EPR.

Subpial Hematoma and Extravasation in the Interhemispheric Fissure with Subarachnoid Hemorrhage

PubMed Central

Matsuoka, Go; Abe, Kayoko; Okada, Yoshikazu; Sakai, Shuji

2015-01-01

A recent report on computed tomography (CT) findings of contrast extravasation in subarachnoid hemorrhage (SAH) with Sylvian hematoma suggests that the occurrence of the hematoma is secondary to bleeding in the subpial space. Our patient was in his sixties and was admitted to the hospital because of loss of consciousness (Glasgow Coma Scale E4V1M4). SAH was diagnosed in plain head CT, and growing hematomas were observed in the Sylvian and interhemispheric fissures following a subarachnoid hemorrhage. CT angiography (CTA) using a dual-phase scan protocol revealed contrast extravasation in both the fissures in the latter phase, and hematoma in the interhemispheric fissure contained multiple bleeding points. This case indicates that the occurrence of subpial hematoma such as Sylvian hematoma can be a secondary event following subpial bleeding from damaged small vessels elsewhere in the cranium. Instead of four-dimensional (4D) CT, the dual-phase CTA technique may help detect minor extravasations with usual helical CT scanner. PMID:25963159

Femtosecond Laser in situ Keratomileusis Flap Creation in Narrow Palpebral Fissure Eyes without Suction.

PubMed

Chang, John S M; Law, Antony K P; Ng, Jack C M; Cheng, May S Y

2017-01-01

To evaluate a surgical technique used in eyes with narrow palpebral fissure undergoing femtosecond laser flap creation without suction during laser in situ keratomileusis (LASIK). All data of 2 patient groups were collected through chart review. Group 1 consisted of 6 eyes with narrow palpebral fissure in which the suction ring was manually fixated and femtosecond laser was applied accordingly. Thirty comparison cases were randomly drawn from among eyes that underwent a standard LASIK procedure matched for age and preoperative refraction (group 2). Only 1 eye of each patient was selected to compare the refractive and visual outcomes between groups. In all group 1 eyes, the flaps were created successfully with manual fixation of the suction ring without suction. No eyes lost 2 or more lines of vision. No significant difference was found in the safety and refractive outcomes between groups. Manual fixation of the suction ring in eyes with narrow palpebral fissure without suction was feasible for flap creation during LASIK.

Femtosecond Laser in situ Keratomileusis Flap Creation in Narrow Palpebral Fissure Eyes without Suction

PubMed Central

Chang, John S.M.; Law, Antony K.P.; Ng, Jack C.M.; Cheng, May S.Y.

2017-01-01

Purpose To evaluate a surgical technique used in eyes with narrow palpebral fissure undergoing femtosecond laser flap creation without suction during laser in situ keratomileusis (LASIK). Methods All data of 2 patient groups were collected through chart review. Group 1 consisted of 6 eyes with narrow palpebral fissure in which the suction ring was manually fixated and femtosecond laser was applied accordingly. Thirty comparison cases were randomly drawn from among eyes that underwent a standard LASIK procedure matched for age and preoperative refraction (group 2). Only 1 eye of each patient was selected to compare the refractive and visual outcomes between groups. Results In all group 1 eyes, the flaps were created successfully with manual fixation of the suction ring without suction. No eyes lost 2 or more lines of vision. No significant difference was found in the safety and refractive outcomes between groups. Conclusion Manual fixation of the suction ring in eyes with narrow palpebral fissure without suction was feasible for flap creation during LASIK. PMID:28690535

Automatic lung lobe segmentation using particles, thin plate splines, and maximum a posteriori estimation.

PubMed

Ross, James C; San José Estépar, Rail; Kindlmann, Gordon; Díaz, Alejandro; Westin, Carl-Fredrik; Silverman, Edwin K; Washko, George R

2010-01-01

We present a fully automatic lung lobe segmentation algorithm that is effective in high resolution computed tomography (CT) datasets in the presence of confounding factors such as incomplete fissures (anatomical structures indicating lobe boundaries), advanced disease states, high body mass index (BMI), and low-dose scanning protocols. In contrast to other algorithms that leverage segmentations of auxiliary structures (esp. vessels and airways), we rely only upon image features indicating fissure locations. We employ a particle system that samples the image domain and provides a set of candidate fissure locations. We follow this stage with maximum a posteriori (MAP) estimation to eliminate poor candidates and then perform a post-processing operation to remove remaining noise particles. We then fit a thin plate spline (TPS) interpolating surface to the fissure particles to form the final lung lobe segmentation. Results indicate that our algorithm performs comparably to pulmonologist-generated lung lobe segmentations on a set of challenging cases.

Automatic Lung Lobe Segmentation Using Particles, Thin Plate Splines, and Maximum a Posteriori Estimation

PubMed Central

Ross, James C.; Estépar, Raúl San José; Kindlmann, Gordon; Díaz, Alejandro; Westin, Carl-Fredrik; Silverman, Edwin K.; Washko, George R.

2011-01-01

We present a fully automatic lung lobe segmentation algorithm that is effective in high resolution computed tomography (CT) datasets in the presence of confounding factors such as incomplete fissures (anatomical structures indicating lobe boundaries), advanced disease states, high body mass index (BMI), and low-dose scanning protocols. In contrast to other algorithms that leverage segmentations of auxiliary structures (esp. vessels and airways), we rely only upon image features indicating fissure locations. We employ a particle system that samples the image domain and provides a set of candidate fissure locations. We follow this stage with maximum a posteriori (MAP) estimation to eliminate poor candidates and then perform a post-processing operation to remove remaining noise particles. We then fit a thin plate spline (TPS) interpolating surface to the fissure particles to form the final lung lobe segmentation. Results indicate that our algorithm performs comparably to pulmonologist-generated lung lobe segmentations on a set of challenging cases. PMID:20879396

King's Bowl Pit Crater, Lava Field and Eruptive Fissure, Idaho - A Multipurpose Volcanic Planetary Analog

NASA Astrophysics Data System (ADS)

Hughes, S. S.; Garry, B.; Kobs-Nawotniak, S. E.; Sears, D. W. G.; Borg, C.; Elphic, R. C.; Haberle, C. W.; Kobayashi, L.; Lim, D. S. S.; Sears, H.; Skok, J. R.; Heldmann, J. L.

2014-12-01

King's Bowl (KB) and its associated eruptive fissure and lava field on the eastern Snake River Plain, is being investigated by the NASA SSERVI FINESSE (Field Investigations to Enable Solar System Science and Exploration) team as a planetary analog to similar pits on the Moon, Mars and Vesta. The 2,220 ± 100 BP basaltic eruption in Craters of the Moon National Monument and Preserve represents early stages of low shield growth, which was aborted when magma supply was cut off. Compared to mature shields, KB is miniscule, with ~0.02 km3 of lava over ~3 km2, yet the ~6 km long series of fissures, cracks and pits are well-preserved for analog studies of volcanic processes. The termination of eruption was likely related to proximity of the 2,270 ± 50 BP eruption of the much larger Wapi lava field (~5.5 km3 over 325 km2 area) on the same rift. Our investigation extends early work by R. Greeley and colleagues, focusing on imagery, compositional variations, ejecta distribution, dGPS profiles and LiDAR scans of features related to: (1) fissure eruptions - spatter ramparts, cones, feeder dikes, extension cracks; (2) lava lake formation - surface morphology, squeeze-ups, slab pahoehoe lava mounds, lava drain-back, flow lobe overlaps; and (3) phreatic steam blasts - explosion pits, ejecta blankets of ash and blocks. Preliminary results indicate multiple fissure eruptions and growth of a basin-filled lava lake up to ~ 10 m thick with outflow sheet lava flows. Remnant mounds of original lake crust reveal an early high lava lake level, which subsided as much as 5 m as the molten interior drained back into the fissure system. Rapid loss of magma supply led to the collapse of fissure walls allowing groundwater influx that triggered multiple steam blasts along at least 500 m. Early blasts occurred while lake magma pressure was still high enough to produce squeeze-ups when penetrated by ejecta blocks. The King's Bowl pit crater exemplifies processes of a small, but highly energetic eruption that ejected blocks up to 2 m strewn over 200 m onto the lava lake surface.

Coupling Eruptive Dynamics Models to Multi-fluid Plasma Dynamic Simulations at Enceladus

NASA Astrophysics Data System (ADS)

Paty, C. S.; Dufek, J.; Waite, J. H.; Tokar, R. L.

2011-12-01

The interaction of Saturn's magnetosphere with Enceladus provides an exciting natural laboratory for expanding our understanding of charge-neutral-dust interactions and their impact on mass and momentum loading of the system and the associated magnetic perturbations. However, one of the more challenging questions regarding the Enceladus plume relates to the subsurface eruptive mechanism responsible for generating the observed jets of material that compose the plume, and the three-dimensional distribution of neutral gas and dust in the plume. In this work we implement a multiphase eruptive dynamics model [cf. Dufek & Bergantz, 2007; Dufek and Bergantz, 2005] to examine the evolution of the plume morphology for a given eruption. We model the eruptive mechanism in a two-part, coupled domain including a fissure model and a plume model. A high resolution, multiphase, fissure model examines eruptive processes in a fissure from fragmentation to the surface. The fissure model is two-dimensional and provides spatial and temporal information about the dust/ice grains and gas. The depth to the fragmentation surface is currently treated as a free parameter and we examine a range of fissure morphologies. We do not explicitly force choked conditions at the vent, but rather due to the geometry, the velocities of the particle and gas mixture approach the sound speed for a 'dusty' gas mixture. The fissure model provides a source for the 3D plume model which examines the morphology of the plume resulting from different fissure configurations and provides a self-consistent physical basis to link concentrations in different regions of the plume to an eruptive mechanism. These initial models describing the resulting gas and dust grain distribution will be presented in the context of existing observations. We will also demonstrate the first stages of integration of these results into the existing multi-fluid plasma dynamic simulations of Enceladus' interaction with Saturn's magnetosphere. These more sophisticated plume morphologies and their effects on the plasma dynamic interaction will be assessed in the context of existing modeling efforts for this system.

An empirical comparison of Markov cohort modeling and discrete event simulation in a capacity-constrained health care setting.

PubMed

Standfield, L B; Comans, T A; Scuffham, P A

2017-01-01

To empirically compare Markov cohort modeling (MM) and discrete event simulation (DES) with and without dynamic queuing (DQ) for cost-effectiveness (CE) analysis of a novel method of health services delivery where capacity constraints predominate. A common data-set comparing usual orthopedic care (UC) to an orthopedic physiotherapy screening clinic and multidisciplinary treatment service (OPSC) was used to develop a MM and a DES without (DES-no-DQ) and with DQ (DES-DQ). Model results were then compared in detail. The MM predicted an incremental CE ratio (ICER) of $495 per additional quality-adjusted life-year (QALY) for OPSC over UC. The DES-no-DQ showed OPSC dominating UC; the DES-DQ generated an ICER of $2342 per QALY. The MM and DES-no-DQ ICER estimates differed due to the MM having implicit delays built into its structure as a result of having fixed cycle lengths, which are not a feature of DES. The non-DQ models assume that queues are at a steady state. Conversely, queues in the DES-DQ develop flexibly with supply and demand for resources, in this case, leading to different estimates of resource use and CE. The choice of MM or DES (with or without DQ) would not alter the reimbursement of OPSC as it was highly cost-effective compared to UC in all analyses. However, the modeling method may influence decisions where ICERs are closer to the CE acceptability threshold, or where capacity constraints and DQ are important features of the system. In these cases, DES-DQ would be the preferred modeling technique to avoid incorrect resource allocation decisions.

Synthèse bibliographique : micro-texturation et microinjection de thermoplastiques

NASA Astrophysics Data System (ADS)

Vera, Julie; Brulez, Anne-Catherine; Contraires, Elise; Larochette, Mathieu; Valette, Stéphane; Benayoun, Stéphane

2017-12-01

La fonctionnalisation de surface des matériaux et notamment des polymères fait l'objet de recherches intenses dans de nombreux secteurs tels que l'industrie du biomédical ou du transport afin de conférer aux pièces des propriétés spécifiques comme l'antibuée, la réduction du frottement ou le dégivrage… Dans le cas d'une production en grande série de pièces polymères fonctionnalisées, il est préférable, pour des questions de coûts, de générer des textures, au moyen d'une technique de reproduction d'empreinte comme l'injection plastique. Toutefois les fonctions requises nécessitent parfois la reproduction de dimensions microniques voire submicroniques poussant à ses limites la maîtrise du procédé conventionnel, avec les caractéristiques de l'injection de micro-pièces, mais aussi des spécificités propres à la micro-texturation. L'objet de cette revue bibliographique est de couvrir le large spectre des problèmes techniques et scientifiques associés à la micro-texturation des pièces plastiques. Les techniques d'usinage de ces micro-motifs sur les outillages et le rôle des revêtements est particulièrement décrit ainsi que le besoin de mettre en œuvre des approches spécifiques de caractérisation topographique des textures. L'influence des paramètres du procédé d'injection est aussi discutée, soulignant la nécessité d'appréhender la micro-texturation des pièces plastiques avec une nouvelle grille de lecture de la microinjection.

Dental Pit and Fissure Sealants: Implications for School Health Personnel.

ERIC Educational Resources Information Center

McCormack-Brown, K. R.; And Others

1989-01-01

To promote good personal hygiene practices in students, school health personnel must be informed about dental pit and fissure sealants and related programs. Adoption and maintenance of such programs may depend on the success of school health personnel in educating administrators and policymakers. (SM)

Internal sphincterotomy versus topical nitroglycerin ointment for chronic anal fissure.

PubMed

Aslam, Muhammad I; Pervaiz, Arif; Figueiredo, Rodrigo

2014-01-01

Anal fissure is a common benign condition. An anorectal problem is defined as a split in the anal canal mucosa that extends from the dentate line to the anal verge. Chronic anal fissure is defined by a history of symptoms present for more than 2 months' duration and with a triad of external skin tags, namely, a hypertrophied anal papilla, an ulcer with rolled edges, and a base exposing the internal sphincter. Because complications such as incontinence are associated with surgical treatment, chemical sphincterotomy is currently favored. The objective of this study is to compare the difference in outcome between open partial lateral anal sphincterotomy and application of topical 0.2% nitroglycerin ointment for the treatment of chronic anal fissure. This was a quasi-experimental study carried out between January 16, 2007 and January 15, 2008 in the Surgical Department of Jinnah Hospital, Lahore, Pakistan. Sixty consecutive cases with a clinical diagnosis of chronic anal fissure were recruited in the study. All recruited patients met the study inclusion criteria and were randomly assigned to one of the two groups. Group A was managed conservatively using topical 0.2% nitroglycerin ointment, whereas Group B underwent open partial lateral anal sphincterotomy. Both groups were followed up at 1 week, 2 weeks, 4 weeks, and 6 weeks after the treatment. All the patients complained of pain. A total of 43 (71.7%) patients had pain with constipation, whereas 31 (51.7%) patients had bleeding per rectum. Upon clinically examining the anal area, tenderness was elicited in all 60 (100%) patients. Group A included 30 (11 females and 19 males) cases treated with topical 0.2% nitroglycerin ointment and Group B included 30 (11 females and 19 males) cases who underwent open partial lateral anal sphincterotomy. In Group A, only 15 patients with fissures were successfully treated (50%). By contrast, 28 (93%) patients with fissures in Group B were successfully treated, and only two (7%) remained uncured. These two patients (6.6%) in Group B suffered from incontinence due to flatus and feces as a complication of the procedure. This quasi-experimental study demonstrates that open partial lateral internal sphincterotomy is superior to topical 0.2% nitroglycerin application in the treatment of chronic anal fissure, with good symptomatic relief, high rate of healing, fewer side effects, and a very low rate of early continence disturbances. Copyright © 2013. Published by Elsevier B.V.

Deformation Associated With the July 21 Fissure Eruption at Kilauea Volcano, Hawai`i

NASA Astrophysics Data System (ADS)

Poland, M.; Orr, T.; Miklius, A.

2007-12-01

Deformation measurements at the Pu`u `O`o cone on Kilauea volcano indicate that the vent is underlain by a shallow magma storage reservoir fed by magma transported from Kilauea's summit. The Pu`u `O`o reservoir was drained during the "Father's&pDay" intrusion of June 17-19, 2007, causing Pu`u `O`o's floor to collapse. Following the intrusion, the reservoir gradually refilled and lava reappeared on July 1-2. A lava lake grew in the crater during July 2-20, steadily raising the elevation of the crater floor. The crater interior and adjoining walls began to uplift on July 10, and 2 days later lava began to vent above the level of the lava lake along the margins of the crater. The number of crater margin vents and the magnitude of their activity increased until July 21, by which time crater uplift amounted to about 8 meters. Early that morning, the lava pond at Pu`u `O`o drained suddenly and an eruptive fissure opened on the east flank of the cone. The fissure propagated 2 km downrift, and within a few hours the eruption had localized on three fissure segments between 1 and 2 km east of Pu`u `O`o. Lava erupting from this series of vents formed a system of perched lava ponds feeding long `a`a flows. Deformation associated with the July 21 fissure was exceptionally well-documented by a borehole tiltmeter on the north flank of Pu`u `O`o and 7 continuous GPS stations within 2 km of the cone (the fissure propagated between two of these GPS stations). The time series of geodetic measurements suggests that deflation of Pu`u `O`o began at about 2250 HST (Hawaiian Standard Time - UTC minus 10 hours) on July 20, while a camera looking into Pu`u `O`o crater recorded draining of the lava lake starting at around 2355 HST. Deformation associated with opening of the fissure was apparent in the tilt and GPS records by 0012 HST, with the camera showing glow in the direction of the eruption site by 0039 HST on July 21. Localized deformation from InSAR suggests that the fissure has a shallow source, probably within 1 km of the surface; this interpretation is also supported by kinematic GPS results collected from points around Pu`u `O`o in July 2006 and July 2007.

La prise en charge des troubles de santé mentale par les omnipraticiens du Québec

PubMed Central

Fleury, Marie-Josée; Farand, Lambert; Aubé, Denise; Imboua, Armelle

2012-01-01

Résumé Objectif Cette recherche vise à documenter la prise en charge des troubles mentaux (TM) par les omnipraticiens. Type d’étude Il s’agit d’une étude mixte intégrant un questionnaire auto-administré et des entrevues qualitatives. La banque de données administratives des actes médicaux de la Régie de l’assurance maladie du Québec a aussi été analysée. Contexte La province de Québec. Participants Un total de 1415 omnipraticiens de différents lieux de pratiques ont été sollicités pour le questionnaire; 970 ont été rejoints. Un sous-groupe de 60 omnipraticiens a été rejoint pour les entrevues. Principaux paramètres à l'étude La prévalence annuelle des consultations reliées à des TM courants (TMC) ou graves (TMG), les pratiques cliniques, les pratiques de collaboration, les facteurs facilitant ou entravant la prise en charge des TM, ainsi que les recommandations pour l’amélioration du système de soins. Résultats Le taux de réponse a été de 41% (n = 398 omnipraticiens) pour le questionnaire et de 63% (n = 60) pour les entrevues. Environ 25 % des visites chez les omnipraticiens sont associées à des TM. Presque tous les omnipraticiens prennent en charge des TMC et se sentent compétents pour le faire, à l’inverse de la situation retrouvée pour les TMG. Près de 20 % des TMC sont référés (principalement à des intervenants psychosociaux), alors que près de 75 % des TMG sont référés (surtout en psychiatrie et à l’urgence). Plus de 50 % des omnipraticiens affirment n’entretenir aucun contact avec l’une ou l’autre des ressources de santé mentale. Plusieurs facteurs influencent la prise en charge des TM: les profils des patients (complexité des TM, troubles concomitants); les caractéristiques des omnipraticiens (réseau informel, formation); la culture professionnelle (travail en silo, mécanismes cliniques formalisés); le milieu institutionnel (multidisciplinarité, salariat); l’organisation des services (ressources; coordination formalisée) et l’environnement (politiques). Conclusion Le rôle clé des omnipraticiens et leur soutien à la prise en charge des TM ont été démontrés, spécifiquement pour les TMC. Pour une prise en charge optimale des soins primaires de santé mentale, des stratégies à composantes multiples, dont les soins partagés, devraient être davantage déployées.

Hemorrhoids and anal fissures in inflammatory bowel disease.

PubMed

D'Ugo, S; Stasi, E; Gaspari, A L; Sileri, P

2015-12-01

Perianal disease is a common complication of inflammatory bowel disease (IBD). It includes different conditions from more severe and potentially disabling ones, such as abscesses and fistulas, to more benign conditions such as hemorrhoids, skin tags and fissures. Most literature has been focused on anal sepsis and fistulae, as they carry the majority of disease burden and often alter the natural course of the disease. Hemorrhoids and anal fissures in patients with IBD have been overlooked, although they can represent a challenging problem. The management of hemorrhoids and fissures in IBD patients may be difficult and may significantly differ compared to the non-affected population. Historically surgery was firmly obstructed, and hemorrhoidectomy or sphincterotomy in patients with associated diagnosis of IBD was considered harmful, although literature data is scant and based on small series. Various authors reported an incidence of postoperative complications higher in IBD than in the general populations, with potential severe events. Considering that a spontaneous healing is possible, the first line management should be a medical therapy. In patients non-responding to conservative measures it is possible a judicious choice of surgical options on a highly selective basis; this can lead to acceptable results, but the risk of possible complications needs to be considered. In this review it is analyzed the current literature on the incidence, symptoms and treatment options of hemorrhoids and anal fissures in patients with Crohn's disease and ulcerative colitis.

An in vitro investigation of pre-treatment effects before fissure sealing.

PubMed

Bagheri, Mahshid; Pilecki, Peter; Sauro, Salvatore; Sherriff, Martyn; Watson, Timothy F; Hosey, Marie Therese

2017-11-01

Fissure sealants prevent occlusal caries in permanent molars. Enamel preparation methods are used before fissure sealing. To investigate effects of bioglass air-abrasion pre-treatment with and without an adhesive, on fissure enamel of permanent teeth, with respect to etchability, microleakage and microtensile bond strength. Half of the occlusal surfaces of 50 extracted premolars underwent bioglass air-abrasion. Dye was applied to the entire occlusal surface. Photographs were taken to score etched surface by dye uptake. Adhesive was applied to 25 of the bioglass-treated areas and all teeth were fissure sealed, sectioned, and evaluated using confocal microscopy. Buccal and lingual surfaces of a further eight premolars were acid-etched and randomly received: air-abrasion, adhesive, both, or none before sealant application for microtensile bond strength measurement in half of the samples immediately and half following 6 months of water immersion. Linear mixed models and multinomial logistic regression were used (P = 0.05). Bioglass air-abrasion significantly improved enamel etchability and reduced microleakage. The addition of an adhesive made no difference to either microleakage or microtensile bond strength. The combination of bioglass abrasion and adhesive led to more cohesive, rather than adhesive, failure. Bioglass air-abrasion improved enamel etchability and reduced microleakage irrespective of the adhesive use but neither pre-treatment affected the microtensile bond strength. © 2017 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Minimisation des inductances propres des condensateurs à film métallisé

NASA Astrophysics Data System (ADS)

Joubert, Ch.; Rojat, G.; Béroual, A.

1995-07-01

In this article, we examine the different factors responsible for the equivalent series inductance in metallized capacitors and we propose structures for capacitors that reduce this inductance. After recalling the structure of metallized capacitors we compare, by experimental measurements, the inductance due to the winding and that one added by the connections. The latter can become preponderant. In order to explain the experimental evolution of the winding impedance vs. frequency, we describe an analytical model which gives the current density in the winding and its impedance. This model enables us to determine the self resonant frequency for different types of capacitors. From where, we can infer the influence of the height of capacitors and their internal and external radius upon performances, It appears that to reduce the equivalent series inductance, it is better to use flat windings and annular windings. Dans cet article nous examinons les différents facteurs responsables de l'inductance équivalente série dans les condensateurs à film métallisé et proposons des géométries de condensateurs qui réduisent cette inductance. Après avoir rappelé la structure des condensateurs à film métallisé, nous comparons, par des mesures expérimentales, l'inductance due au bobinage et l'inductance ajoutée par les connexions. Cette dernière peut devenir prépondérante. Afin d'expliquer l'évolution de l'impédance du bobinage en fonction de la fréquence, nous décrivons un modèle analytique qui donne la densité du courant dans le bobinage et l'impédance de ce dernier. En outre, ce modèle permet de déterminer la fréquence de résonance série de divers types de condensateurs ce qui permet de déduire l'influence de la hauteur des condensateurs et de leurs rayons interne et externe sur les performances. Il apparaît ainsi que, pour diminuer l'inductance équivalente série, il vaut mieux employer des bobinages plats et des bobinages annulaires.

Les expériences de victimisation, la santé mentale et le bien-être de jeunes trans au Québec

PubMed Central

Raymond, Guillaume; Blais, Martin; Bergeron, Félix-Antoine; Hébert, Martine

2016-01-01

Résumé Les normes traditionnelles de genre prescrivent l’adéquation de l’expression de la masculinité et de la féminité au sexe anatomique de naissance. Les personnes qui présentent des variations dans l’expression de genre sont sujettes à diverses formes de réactions sociales suggérant la réprobation (des regards désapprobateurs aux violences physiques) susceptibles d’influencer négativement leur santé mentale. Trente-sept (37) jeunes se décrivant comme trans ou en questionnement sur leur identité de genre ont été recrutés dans le cadre de l’enquête sur les Parcours Amoureux des Jeunes de minorités sexuelles du Québec. Leurs expériences de victimisation parentale et de victimisation basée sur la non-conformité de genre ainsi que des indicateurs de santé mentale (détresse psychologique, estime de soi) ont été mesurés. Afin de comparer les expériences de victimisation et l’état de santé mentale des jeunes trans, ils ont été appariés à 37 garçons et 37 filles cisgenres sur la base de leurs caractéristiques sociodémographiques. Des analyses de prévalence et un modèle acheminatoire ont été réalisés. Les résultats mettent en évidence que les jeunes trans sont plus susceptibles de présenter des scores cliniques de détresse psychologique et de faible estime d’eux-mêmes que leurs pairs cisgenres. La violence verbale parentale et la victimisation basée sur la non-conformité de genre influencent négativement l’estime de soi, ce qui en retour augmente la probabilité de vivre de la détresse psychologique. Les résultats appuient l’importance des interventions de soutien à la diversité sexuelle et de genre. PMID:26966849

Estimation of transit times in a Karst Aquifer system using environmental tracers: Application on the Jeita Aquifer system-Lebanon.

NASA Astrophysics Data System (ADS)

Doummar, Joanna; Hamdan, Ahmad

2016-04-01

Estimating transit times is essential for the assessment of aquifer vulnerability to contaminants. Groundwater in karst aquifer is assumed to be relatively young due to fast preferential pathways; slow flow components are present in water stored in the fissured matrix. Furthermore, transit times are site specific as they depend on recharge rates, temperatures, elevation, and flow media; saturated and unsaturated zones. These differences create significant variation in the groundwater age in karst systems as the water sampled will be a mix of different water that has been transported through different flow pathways (fissured matrix and conduits). Several methods can be applied to estimate water transit time of an aquifer such as artificial tracers, which provide an estimate for fast flow velocities. In this study, groundwater residence times in the Jeita spring aquifer (Lebanon) were estimated using several environmental tracers such as Chlorofluorocarbons (CFCs), Sulfur Hexafluoride (SF6), Helium-Tritium (3H, 3H- 3He). Additional stable isotope and major ion analysis was performed to characterize water types. Groundwater samples were collected from six different wells in the Jeita catchment area (Jurassic Kesrouane aquifer) as well as from the spring and cave itself. The results are reproducible for the Tritium-Helium method, unlike for the CFC/SF6 methods that yielded poor results due to sampling problems. Tritium concentrations in all groundwater samples show nearly the same concentration (~2.73 TU) except for one sample with relatively lower tritium concentration (~2.26 TU). Ages ranging from 0.07 ± 0.07 years to 23.59 ± 0.00 years were obtained. The youngest age is attributed to the spring/ cave while the oldest ages were obtained in wells tapping the fissured matrix. Neon in these samples showed considerable variations and high delta Ne in some samples indicating high excess air. Four (4) samples showed extreme excess air (Delta-Ne is greater than 70 %) and the remaining 3 samples have Delta-Ne in the expected range between (10-35%). Moreover Tritium-Helium analysis has showed some radiogenic Helium (4He) in one sample along with lower tritium concentrations signifying a mixture of new groundwater with old groundwater (older than 50 yrs). Furthermore, this study is complemented with published analysis of a series of 26 artificial tracer experiments performed in the Jeita karst system (Doummar, 2012). Transit times calculated from tracer experiments ranged between 3 and 300 hours (12 days). The shortest ones were recorded in the Jeita subsurface conduit. While injections in sinkholes yielded moderate transit times, fissured matrix and unsaturated zone resulted in relatively long ones. In Lebanon this type of spatial groundwater age dating using environmental tracers was not applied to date, to the exception of grab sample analysis. A second round of sampling for Tritium-Helium, CFCs and SF6 analysis will be undertaken under different flow periods in February 2016 to validate the obtained results. References Geyer, T. 2008: Process-based characterization of flow and transport in karst aquifers at catchment scale. Dissertation, Georg-August-Universität Göttingen, 103 S. Geyer, T., and Doummar, J. 2013. Protection of the Jeita Spring: Bestimmung der mittleren Verweilzeit des Grundwassers im Einzugsgebiet der Jeita Quelle-Libanon. Special report. Protection of the Jeita Spring. Applied Geosciences. Georg August University, Göttingen.

Morbidity associated with treatment of chronic anal fissure

PubMed Central

Latif, Ansar; Ansar, Anila; Butt, Muhammad Qasim

2013-01-01

Objective: To assess the effectiveness of different modes of treatment of chronic anal fissure as regards improvement of symptoms and complications. Methods: This prospective study included 129 consecutive patients with chronic anal fissures presented to the Surgical Outpatients’ Department of Islam Teaching Hospital Sialkot, Pakistan; from September 2010 to November 2012. Patients were distributed in three groups. In “OBG group”, patients had attended Gynae/Obs OPD and got treated and were then referred to surgical OPD for failure of treatment or recurrence. Patients who presented with history of treatment by GPs were included in “GP Group” “SGR Group” included those who directly reported to surgical OPD for treatment. Patients were managed both pharmacologically as OPD patients and surgically as admitted patients. Patients were instructed to apply small amounts of 0.2% GTN paste in soft white paraffin, to the anoderm with finger tips three times a day. Patients were evaluated at two-week intervals and at each visit the symptoms control, adverse effects and fissure status were recorded. If there was symptomatic relief or the fissure healing was in progress, the treatment was continued for a total duration of eight weeks. Operated patients were nursed in wards after surgery i.e Internal Anal Sphicterotomy. They were advised to report to OPD weekly for one month or earlier if they experienced any symptoms suggestive of complications. Patients were declared cured in case of complete symptomatic relief with fissure healing. Success, failure and associated problems were recorded and analysed to get results. Results:This study included 129 patients who could be followed up for a minimum of three months. These patients were referred by gynaecologist i.e. 22 (17%) for treatment failure while 5 patients with wrong diagnosis were not included in statistical analysis; similarly 41 (32%) patients were referred by general practitioners and 9 patients with wrong diagnosis were excluded. Sixty six patients i.e. 51% were those who directly reported to surgical OPD and had no previous treatment. With surgical treatment, pain, bleeding per rectum and constipation showed significant improvement as compared to GTN ointment application. Fissure healing was 100% in surgical group as compared to 74% in medical group. Complications were recorded and were found to be headache with medical treatment; while the most feared complication with surgical treatment i.e. permanent incontinence was not encountered in our study. Conclusion: Topical glyceryl trinitrate is economical, has a good healing rate, and faecal incontinence has not been reported. Its effectiveness, however, depends on patients’ compliance which may be poor in view of associated headaches and a local burning sensation. It is first line of treatment for anal fissure but lateral internal sphincterotomy is superior, more effective and curative than the chemical sphincterotomy. Surgery is reserved for people with anal fissure who have tried medical therapy for at least one to three months but failed. PMID:24353726

Influence des elements d'addition Ti, Nb, Al sur la structure et les proprietes mecaniques en traction et en fluage (de 298 A 1023 K) des alliages a base de fer et de nickel du type IN 706

NASA Astrophysics Data System (ADS)

Aubert, H.; Laniesse, J.; Lelong, C.; Pigoury, M.

1981-09-01

L'étude a porté sur 13 alliages du type IN 706 dont un alliage commercial et des alliages expérimentaux ayant une teneur en éléments durcissants niobium, titane, aluminium assez différente de celle de la nuance commerciale. On montre l'effet de la composition sur la structure et sur la cinétique de précipitation des phases stables et métastables. On décrit les propriétés mécaniques à l'état précipité: dureté, résistance à la traction, caractéristiques de fluage. Il est conclu que des alliages relativement pauvres en éléments durcissants peuvent convenir à la rélisation de gaines pour les réacteurs à neutrons rapides.

PubMed

Belaid, Loubna; Cloos, Patrick; Ridde, Valéry

2017-04-20

Cette étude vise à décrire la mobilisation des représentations ethnoculturelles par des agents et des gestionnaires de santé pour expliquer l'échec partiel d'une politique de santé maternelle et discuter des conséquences potentielles de ces représentations sur l'accès aux soins de santé des populations.MÉTHODES : Il s'agit d'une recherche qualitative de type socio-anthropologique mobilisant des entretiens approfondis, des discussions informelles, des observations non participantes menées dans les centres de santé et une analyse documentaire. Les entretiens ont été menés auprès de 16 agents de santé et de 10 gestionnaires. Les entretiens ont été enregistrés sous support numérique et transcrits. L'étude s'est déroulée dans le district sanitaire de Djibo au Burkina Faso.RÉSULTATS : L'identification ethnique, les coutumes relatives à l'accouchement (pudeur, discrétion, présence féminine), le statut social des femmes (le faible pouvoir décisionnel), le nomadisme et l'organisation sociale des populations et leurs résistances au changement sont érigés comme des obstacles « culturels » à la politique de santé. L'usage largement répandu de ces représentations par les agents et les gestionnaires de santé contribue à réprimander les populations et à masquer les facteurs structurels qui ont pourtant une influence plus importante sur l'utilisation des services de santé maternelle. Cette recherche met en lumière le danger de l'usage excessif des représentations ethnoculturelles teintées de culturalisme dans les pratiques et les politiques de santé publique en véhiculant des stéréotypes à l'égard de certains groupes de population. Pour comprendre le succès ou l'échec des politiques sanitaires, il demeure important de considérer la qualité du contact avec le système de santé, les facteurs structurels notamment les capacités des ménages à faire face aux dépenses des soins de santé et des distances entre les villages et les centres de santé. Ces éléments permettraient de mieux comprendre les disparités constatées à l'égard des indicateurs d'utilisation des services de santé.

Étude des déterminants individuels de l’adoption du dossier de santé électronique du Québec

PubMed Central

Mezni, H; M-P, Gagnon; Duplantie, J

2016-01-01

Résumé Objectif Selon des études précédentes, les dossiers de santé électroniques peuvent améliorer l’efficacité, la sécurité et la qualité de la prise en charge médicale. Cependant, les prestataires de soins restent réticents quant à son utilisation, ce qui limite son impact sur le système de santé. La présente étude avait pour objectif d’évaluer les perceptions des médecins face au dossier de santé du Québec. Méthodes À partir d’une revue de la littérature sur les facteurs influençant l’adoption des nouvelles technologies de l’information et des communications (NTIC) en général et de la cybersanté en particulier, nous avons élaboré un questionnaire semi-structuré. Au total, 12 médecins utilisateurs potentiels du dossier de santé du Québec (DSQ) ont complété et retourné le questionnaire. Par la suite, nous avons opéré une analyse thématique de contenu, suivie par une théorisation des concepts obtenus. Résultats L’intention d’adopter le DSQ est influencée positivement par l’utilité perçue, la facilité d’utilisation perçue, la démonstrabilité des résultats, la compatibilité du système avec la pratique et l’autoefficacité informatique perçue par les médecins. Inversement, la résistance au changement influence négativement l’adoption du DSQ par les médecins. Conclusion L’identification des déterminants de l’adoption du dossier de santé du Québec est cruciale pour les responsables du secteur de la santé au Québec. Il sera ainsi possible de saisir les attentes des utilisateurs potentiels et d’ajuster les stratégies d’implantation en vue de favoriser une meilleure intégration de cette technologie dans les pratiques médicales. PMID:27867453

How firms set prices for medical materials: a multi-country study.

PubMed

Ide, Hiroo; Mollahaliloglu, Salih

2009-09-01

This study presents a comparison of medical material prices, discusses why differences exist, and examines methods for comparing prices. Market prices for drug-eluting stents (DES), non-drug-eluting stents (non-DES), and percutaneous transluminal coronary angioplasty (PTCA) catheters were collected from five countries: the United States, Japan, Korea, Turkey, and Thailand. To compare prices, three adjustment methods were used: currency exchange rates, purchasing power parity (PPP), and gross domestic product (GDP) per capita. The ratios of medical material prices compared with those in the United States were higher in Japan (from 1.4 for DES to 5.0 for PTCA catheters) and Korea (from 1.2 for DES to 4.0 for PTCA catheters), and lower in Turkey (from 0.8 for non-DES to 1.4 for DES) and Thailand (from 0.5 for non-DES to 1.3 for PTCA catheters). The PPP-adjusted ratios changed slightly for Japan, Korea, and Turkey. When the prices were adjusted by GDP per capita, the ratios were much higher. Comparing prices using currency exchange rates or PPP is applicable only between countries with stable economic relations; adjustment by GDP per capita reflects the actual burden. Further study is needed to fully elucidate the factors influencing the global medical material market.

When to use discrete event simulation (DES) for the economic evaluation of health technologies? A review and critique of the costs and benefits of DES.

PubMed

Karnon, Jonathan; Haji Ali Afzali, Hossein

2014-06-01

Modelling in economic evaluation is an unavoidable fact of life. Cohort-based state transition models are most common, though discrete event simulation (DES) is increasingly being used to implement more complex model structures. The benefits of DES relate to the greater flexibility around the implementation and population of complex models, which may provide more accurate or valid estimates of the incremental costs and benefits of alternative health technologies. The costs of DES relate to the time and expertise required to implement and review complex models, when perhaps a simpler model would suffice. The costs are not borne solely by the analyst, but also by reviewers. In particular, modelled economic evaluations are often submitted to support reimbursement decisions for new technologies, for which detailed model reviews are generally undertaken on behalf of the funding body. This paper reports the results from a review of published DES-based economic evaluations. Factors underlying the use of DES were defined, and the characteristics of applied models were considered, to inform options for assessing the potential benefits of DES in relation to each factor. Four broad factors underlying the use of DES were identified: baseline heterogeneity, continuous disease markers, time varying event rates, and the influence of prior events on subsequent event rates. If relevant, individual-level data are available, representation of the four factors is likely to improve model validity, and it is possible to assess the importance of their representation in individual cases. A thorough model performance evaluation is required to overcome the costs of DES from the users' perspective, but few of the reviewed DES models reported such a process. More generally, further direct, empirical comparisons of complex models with simpler models would better inform the benefits of DES to implement more complex models, and the circumstances in which such benefits are most likely.

The electrical properties and glass transition of some dental materials after temperature exposure.

PubMed

Marcinkowska, Agnieszka; Gauza-Wlodarczyk, Marlena; Kubisz, Leszek; Hedzelek, Wieslaw

2017-10-17

The physicochemical properties of dental materials will remain stable only when these materials in question are resistant to the changes in the oral cavity. The oral environment is subject to large temperature variations. The aim of the study was the assessment of electrical properties and glass transition of some dental materials after temperature exposure. Composite materials, compomers, materials for temporary prosthetic replacement and resin-based pit and fissure sealants were used in the study. The method used was electric conductivity of materials under changing temperature. The order of materials presenting the best characteristics for insulators was as follows: materials for temporary prosthetic replacement, resin-based pit and fissure sealants, composites, and compomers. Thanks to comparisons made between graphs during I and II heating run, the method could be used to observe changes in the heated material and determine whether the changes observed are reversible or permanent. The graphs also provided temperature values which contain information on glass transition during heating. In the oral cavity the effect of the constant temperature stimulus influences maturity of dental materials and improves their properties. But high temperatures over glass transition temperature can cause irreversible deformation and changes of the materials properties, even in a short time.

Etude de l'influence de la temperature et de l'humidite sur les proprietes mecaniques en traction des fibres de chanvre et de coco

NASA Astrophysics Data System (ADS)

Ho Thi, Thu Nga

L'objectif de cette etude fut d'etablir l'effet de l'humidite et de la temperature sur la resistance en traction et le module elastique des fibres de chanvre et de coco. Deux etudes ont ete realisees afin d'atteindre cet objectif. La premiere vise l'absorption de l'humidite dans ces fibres en exposition dans l'air (de 0%RH a 80%RH) ainsi que l'absorption de l'eau dans ces fibres immergees dans l'eau aux differentes temperatures. La deuxieme consiste a mesurer la resistance en traction et le module elastique de ces fibres sous differentes conditions d'humidite et de temperature. En basant sur les resultats experimentaux obtenus, les methodes semi empiriques et de reseaux de neurones ont ete utilisees pour but de predire les proprietes en traction (resistance et module d'elasticite) des fibres de chanvre et de coco sous l'influence de l'humidite et de la temperature.

Strain Partitioning and Accumulation across Overlapping Spreading Centers: Geodetic GPS Measurements in South Iceland

NASA Astrophysics Data System (ADS)

La Femina, P. C.; Dixon, T. H.; Malservisi, R.; Árnadóttir, T.; Sigmundsson, F.; Sturkell, E.

2004-12-01

Overlapping spreading centers (OSCs) and propagating ridges are important classes of mid-ocean ridges. Kinematic models of OSCs predict along strike variability in spreading rate associated with the propagation of one center and deactivation of the other. Iceland offers a unique opportunity to investigate strain accumulation and partitioning across slow, overlapping spreading centers, and the influence of a ridge centered hotspot on ridge kinematics and morphology. We present results of detailed GPS observations across the Eastern and Western Volcanic Zones, south Iceland, spanning a seven to nine year inter-rifting period, and compare our observations with two-dimensional elastic half-space models that simulate the long-term spreading process. We then compare the elastic half-space models with simple viscoelastic coupling models. We model three velocity profiles across the EVZ-WVZ system, solving for the spreading rate, locking depth and horizontal location of each spreading center. Our spreading rate estimates indicate along strike variations as expected in an OSC system and total spreading rates consistent with geodetic and geologic plate motion models. Spreading rates in the WVZ increase from northeast (3 ±1 mm/yr) to southwest (7 ±1 mm/yr). Spreading rates in the southwest propagating EVZ decrease from northeast (17 ±1 mm/yr) to southwest (12 ±1 mm/yr). These results are consistent with a model whereby the WVZ is deactivating in the direction of EVZ propagation. The morphology of the two spreading centers reflects the spreading rate differences and their location relative to the Iceland hotspot. The predicted locations of the spreading axis for each zone are consistent with mapped Holocene fissure swarms. The neovolcanic zone of the slower WVZ consists of a narrow (10-20 km wide) axial graben and has had few Holocene eruptions. The faster EVZ consists of two parallel neovolcanic zones separated by a 20 km gap of inactivity, little normal faulting, higher topography and five historical fissure eruptions, reflecting its proximity to the hotspot. The maximum velocity gradient in the EVZ is located on the Veidivotn fissure swarm, which had a small volume eruption in 1864. The last major fissure eruption in the EVZ was the 1783 Lakagigar, located 20 km to the east. This pattern of current and past strain accumulation and release suggests intra-ridge jumping of activity and crustal accretion across a 60 km wide area.

Effect of in-utero diethylstilboestrol exposure on human oocyte quality and fertilization in a programme of in-vitro fertilization.

PubMed

Kerjean, A; Poirot, C; Epelboin, S; Jouannet, P

1999-06-01

Genital tract abnormalities and adverse pregnancy outcome are well known in women exposed in utero to diethylstilboestrol (DES). Data about adverse reproductive performance in women exposed to DES have been published, including controversial reports of menstrual dysfunction, poor responses after ovarian stimulation, oocyte maturation and fertilization abnormalities. We compared oocyte quality, in-vitro fertilization results and embryo quality for women exposed in utero to DES with a control group. Between 1989 and 1996, 56 DES-exposed women who had 125 in-vitro fertilization (IVF) attempts were retrospectively compared to a control group of 45 women with tubal disease, who underwent 73 IVF attempts. Couples suffering from male infertility were excluded. The parameters compared were oocyte quality (maturation abnormalities, immature oocyte, mature oocyte), fertilization and cleavage rate (per treated and metaphase II oocytes), and embryo quality (number and grade). We found no significant difference in oocyte maturational status, fertilization rates, cleavage rates, embryo quality and development between DES-exposed subjects and control subjects. These results suggest that in-utero exposure to DES has no significant influence on oocyte quality and fertilization ability as judged during IVF attempts.

Giant desiccation fissures on the Black Rock and Smoke Creek Deserts, Nevada

USGS Publications Warehouse

Willden, R.; Mabey, D.R.

1961-01-01

Open fissures, from 100 to several hundred feet apart, that have produced polygonal patterns on the Black Rock Desert, Nevada, are believed to be giant desiccation cracks resulting from a secular trend toward aridity in the last few decades. Similar features on the Smoke Creek Desert probably have the same origin.

Phase Transformations in a Human Tooth Tissue at the Initial Stage of Caries

PubMed Central

Prutskij, Tatiana; Ippolitov, Yury

2015-01-01

The aim of the paper is to study phase transformations in solid tissues of the human teeth during the development of fissure caries by Raman and fluorescence microspectroscopy. The study of the areas with fissure caries confirmed the assumption of the formation of a weak interaction between phosphate apatite enamel and organic acids (products of microorganisms). The experimental results obtained with by Raman microspectroscopy showed the formation of dicalcium phosphate dihydrate - CaHPO4-2H2O in the area of mural demineralization of carious fissure. A comparative analysis of structural and spectroscopic data for the intact and carious enamel shows that emergence of a more soluble phase - carbonate-substituted hydroxyapatite - is typical for the initial stage of caries. It is shown that microareas of dental hard tissues in the carious fissure due to an emerging misorientation of apatite crystals have a higher fluorescence yield than the area of the intact enamel. These areas can be easily detected even prior to a deep demineralization (white spot stage) for the case of irreversibly changed organomineral complex and intensive removal of the mineral component. PMID:25901743

Endoscopic endonasal anatomy of superior orbital fissure and orbital apex regions: critical considerations for clinical applications.

PubMed

Dallan, Iacopo; Castelnuovo, Paolo; de Notaris, Matteo; Sellari-Franceschini, Stefano; Lenzi, Riccardo; Turri-Zanoni, Mario; Battaglia, Paolo; Prats-Galino, Alberto

2013-05-01

The superior orbital fissure is a critical three-dimensional space connecting the middle cranial fossa and the orbit. From an endoscopic viewpoint, only the medial aspect has a clinical significance. It presents a critical relationship with the lateral sellar compartment, the pterygopalatine fossa and the middle cranial fossa. The connective tissue layers and neural and vascular structures of this region are described. The role of Muller's muscle is confirmed, and the utility of the maxillary and optic strut is outlined. Muller's muscle extends for the whole length of the inferior orbital fissure, passes over the maxillary strut and enters the superior orbital fissure, representing a critical surgical landmark. Dividing the tendon between the medial and inferior rectus muscle allows the identification of the main trunk of the oculomotor nerve, and a little laterally, it is usually possible to visualize the first part of the ophthalmic artery. Based on a better knowledge of anatomy, we trust that this area could be readily addressed in clinical situations requiring an extended approach in proximity of the orbital apex.

The student's dilemma, liver edition: incorporating the sonographer's language into clinical anatomy education.

PubMed

Hall, M Kennedy; Mirjalili, S Ali; Moore, Christopher L; Rizzolo, Lawrence J

2015-01-01

Anatomy students are often confused by multiple names ascribed to the same structure by different clinical disciplines. Increasingly, sonography is being incorporated into clinical anatomical education, but ultrasound textbooks often use names unfamiliar to the anatomist. Confusion is worsened when ultrasound names ascribed to the same structure actually refer to different structures. Consider the sonographic main lobar fissure (MLF). The sonographic MLF is a hyper-echoic landmark used by sonographers of the right upper quadrant. Found in approximately 70% of people, there is little consensus on what the sonographic MLF is anatomically. This structure appears to be related to the main portal fissure (aka principal plane of the liver or principal hepatic fissure), initially described by anatomists and surgeons as in intrahepatic division along the middle hepatic vein which in essence divides the territories of the left and right hepatic arteries and biliary systems. By exploring the relationship between the main portal fissure and the sonographic MLF in cadaveric livers ex vivo, the data suggest the sonographic MLF is actually an extrahepatic structure that parallels the rim of the main portal fissure. The authors recommend that this structure be renamed the "sonographic cystic pedicle," which includes the cystic duct and ensheathing fat and blood vessels. In the context of the redefined underlying anatomy, the absence of the sonographic cystic pedicle due to anatomic variation may serve an important clinical role in predicting complications from difficult laparoscopic cholecystectomies and is deserving of future study. © 2015 American Association of Anatomists.

A Comparative Evaluation of the Effect of Bonding Agent on the Tensile Bond Strength of Two Pit and Fissure Sealants Using Invasive and Non-invasive Techniques: An in-vitro Study.

PubMed

Singh, Shamsher; Adlakha, Vivek; Babaji, Prashant; Chandna, Preetika; Thomas, Abi M; Chopra, Saroj

2013-10-01

Newer technologies and the development of pit and fissure sealants have shifted the treatment philosophy from 'drill and fill' to that of 'seal and heal'. The purpose of this in-vitro study was to evaluate the effects of bonding agents on the tensile bond strengths of two pit and fissure sealants by using invasive and non-invasive techniques. One hundred and twenty bicuspids were collected and teeth were divided into two groups: Group-I (Clinpro) and Group-II (Conseal f) with 60 teeth in each group. For evaluating tensile bond strengths, occlusal surfaces of all the teeth were flattened by reducing buccal and lingual cusps without disturbing fissures. Standardised polyvinyl tube was bonded to occlusal surfaces with respective materials. Sealants were applied, with or without bonding agents, in increments and they were light cured. Tensile bond strengths were determined by using Universal Testing Machine. Data were then statistically analysed by using Student t-test for comparison. A statistically significant difference was found in tensile bond strength in invasive with bonding agent group than in non-invasive with bonding agent group. This study revealed that invasive techniques increase the tensile bond strengths of sealants as compared to non- invasive techniques and that the use of a bonding agent as an intermediate layer between the tooth and fissure sealant is beneficial for increasing the bond strength.

Who discovered the sylvian fissure?

PubMed

Collice, Massimo; Collice, Rosa; Riva, Alessandro

2008-10-01

Cerebral convolutions were unknown until the 17th century. A constant sulcus was not recognized until the mid-1600s; it was named "the fissure of Sylvius," after the person who had always been considered as the one who discovered it. It is commonly asserted that the first description of the lateral scissure was made by Caspar Bartholin, who attributed its discovery to Sylvius. However, this was not actually the case, as Caspar Bartholin died in 1629, whereas Sylvius started studying medicine in 1632. The description could have been made either by Caspar Bartholin's son Thomas or by Sylvius himself. Irrespective of the description's author, the key to the history of the lateral fissure is that it was first identified by Fabrici d'Acquapendente in 1600, 40 years before Sylvius' description. In one of the 300 colored plates (Tabulae Pictae) by Fabrici, the lateral fissure is perfectly depicted, as are the temporal convolutions. Therefore, even if it was an accidental discovery, Fabrici should be the one noted as having discovered the fissure. This article ends with a short history of the plates. They were painted in oil on paper and were thought to further a great work, the Theatrum Totius Animalis Fabricae, which was begun in 1591 and never completed or published. Only the colored illustrations of this project remain. These plates were forgotten for more than 200 years, until they were rediscovered by Giuseppe Sterzi in 1909. They are among the best examples of anatomic iconography in terms of innovation, accuracy, and artistic accomplishment.

Seismic and Infrasound Recordings from Kilauea Volcano: Volcanic Tremor, Lava Outbreaks, and Fissure Eruptions

NASA Astrophysics Data System (ADS)

Fee, D.; Garces, M.; Orr, T.

2007-12-01

The continuous effusion from the Pu'u 'O'o crater complex, the active vent of Kilauea Volcano, Hawaii, produced nearly continuous tremor for years. Recently this tremor was recorded by two infrasound arrays, one at 12.5 km and one at 2.5 km, as well as a broadband seismometer at the closer array. These recordings exhibit significant temporal changes. A sharp, complex spectral peak of ~0.6 Hz is present in nearly the entire dataset, and tends to bifurcate and shift frequency over time. Although the seismic wavefield at Kilauea is complex and path effects appear to play a significant role, this spectral peak is also weakly manifested in the seismic recordings. Array processing of the infrasonic data reveals an abundance of broadband signal as well. Most of the signal appears to originate from the main crater region. However, the 2.5 km array detected the presence of a skylight with growing hornitos ~400 m south of Pu'u 'O'o on the active lava tube system. On June 19th, 2007, the magmatic system at Pu'u 'O'o changed. An intrusion of magma reached the surface 6 km west of the crater complex. The timing and location of the lava outbreak were determined acoustically using array processing. Two distinct acoustic pulses were recorded from the correct azimuth, both exhibiting harmonics. The 7/21 fissure eruption also produced clear infrasound signals. The onset of the fissure eruption east of P'u' 'O'o was apparent beginning around midnight on 7/21 and was focused between ~1.5-5 Hz. Although the fissure eruption continued to produce infrasound, the character of the recorded signal changes over time. A third infrasound array was placed closer to P'u' 'O'o and the fissure to help further constrain the eruption. More detailed results on acoustic signals from the Father's Day Intrusion and Fissure eruption will be presented.

Can earthquake fissures predispose hillslopes to landslides? - Evidence from Central and East Asia

NASA Astrophysics Data System (ADS)

Sidle, Roy C.; Gomi, Takashi; Rajapbaev, Muslim; Chyngozhoev, Nurstan

2017-04-01

Factors affecting earthquake-initiated landslides include earthquake magnitude, focal depth, and seismic wave propagation and attenuation. In contrast to rainfall-initiated landslides, earthquake-induced landslides often occur on convex slopes and near ridgelines. Here we present evidence from Fergana Basin, Kyrgyzstan and Kumamoto, Japan on how fissures developed during earthquakes may promote subsequent initiation of rainfall-triggered landslides. More than 1800 recent major landslides in hilly terrain and soft sediments of the Fergana Basin have been largely attributed to accumulation of heavy rainfall and snowmelt. While no large earthquakes have occurred in the Fergana Basin, smaller earthquakes have generated fissures near ridgelines and on convex slopes. The connection of fissures, developed years or decades before slope failure, with preferential transport of rainwater and runoff into the soil has not been previously investigated. Fissures have been observed to expand with time, particularly during subsequent minor earthquakes, further promoting preferential infiltration. Because the soil mantle does not have large contrasts in permeability that would define a slip plane for landslides, it appears that the position and depth of these fissures may control the location and depth of failures. Zones in the soil where surficial inputs of water are preferentially transported, augment natural subsurface accumulation of antecedent rainfall. Many landslides in the eastern Fergana Basin occur after several months of accumulated precipitation and groundwater has been observed emerging on critical hillside locations (near ridgelines and on convex slopes) prior to slope failure. During the 2016 Kumamoto Earthquake (M 7.3), many landslides were triggered in forest and grassland hillslopes near Mount Aso. All of these earthquakes were shallow (focal depths about 10 km), causing high shaking intensity and ground rupturing. Because soils were relatively dry during these earthquakes, occurrence of debris flows was limited. Instead, most landslides travelled limited distances and consisted of ruptured soil blocks. Large, parallel fissures developed along ridgelines and convex slopes, providing opportunities for preferential flow to initiate mass wasting during later heavy rainfalls. The progressive deterioration of ridgelines could change future catchment drainage patterns. Additionally, sediment accumulated in headwater channels from the initial earthquake-triggered landslides may mobilize as devastating debris flows after additional sediment loading during a large storm. As such, cascading effects of prior earthquakes on later mass wasting appear evident in both regions.

Prevalence of Dental Caries and Fissure Sealants in a Portuguese Sample of Adolescents

PubMed Central

Veiga, Nélio J.; Pereira, Carlos M.; Ferreira, Paula C.; Correia, Ilidio J.

2015-01-01

Introduction The aims of this study were to assess the prevalence of dental caries and the DMFT index, as well as the distribution pattern of pit and fissure sealants on permanent teeth in a Portuguese sample of adolescents, and to assess whether the existing usage of sealants and socio-demographic factors are correlated to caries prevalence on the examined sample. Materials and Methods A cross-sectional study was designed with a sample of 447 adolescents aged 12 to 18 years old, attending a public school in Sátão, Portugal. A self-administered questionnaire with questions about oral health behaviours and socio-economic status was answered by adolescents in the classroom. Clinical examination of oral health status and assessment of fissure sealants were accomplished by only one trained member of the research team. Results We obtained a DMFT index of 3.32 (2.92), which indicates a moderate level of prevalence of dental caries. When considering a DMFT = 0, we found significant statistical differences between the parents´ level of education (≤ 4th grade = 26.3 vs 5th–12th grade = 18.8 vs <12th grade = 43.3, p = 0.001), gender (male = 27.3 vs female = 19.6, p = 0.04), age (≤15 years = 27.1 vs <15 years = 18.5, p = 0.02), presence of fissure sealants (yes = 30.6 vs no = 13.5, p = 0.001) and experience of dental pain (no = 25.4 vs yes = 16.8, p = 0.02). When analyzing the prevalence of fissure sealants, we verified that 58.8% of adolescents had at least one fissure sealant applied. Significant statistical differences were found when analyzing the presence of fissure sealants related with parents´educational level (<9th grade, OR = 1.56 CI95% = 1.05–2.54), gender (female, OR = 1.86 CI95% = 1.19–2.98), experience of dental pain (yes, OR = 0.62 CI95% = 0.39–0.97) and presence of dental caries (yes, OR = 0.35 CI95% = 0.19–0.65). Conclusions The moderate level of caries prevalence reveals the need of improvement of primary prevention interventions among Portuguese adolescents. The establishment of a more targeted preventive program with better and more effective oral health education is essential, having into account socio-demographic aspects. PMID:25803849

Phreatomagmatic explosive eruptions along fissures on the top of mafic stratovolcanoes with overlapping compound calderas

NASA Astrophysics Data System (ADS)

Nemeth, Karoly; Geshi, Nobuo

2017-04-01

On near summit flank eruptions on stratovolcanoes it is commonly inferred that external water to have little or no influence on the course of the eruptions. Hence eruptions are typicaly "dry" that form spatter-dominated fissures and scoria cones. This assumption is based on that in elevated regions - especially on steep slopes - the hydrogeological conditions are not favourable to store large volume of ground water that can have effect on the eruptions. However there is some controversial trend of eruption progression from an early dry eruption below the summit that later turn to be phreatomagmatic as the eruption locus migrates toward the summit. The Suoana Ccrater on top of Miyakejima Island's mafic stratovolcano is a fine example to demonstrate such process. Suona Crater is the topmost crater of the 3 km long fissure aligned chain of small-volume volcanoes that formed in the 7th century flank of the summit region of the Miyakejima mafic stratovolcano. The oval shape crater of Suona (400 x 300 m) is surrounded by a tuff ring that developed over lava flows and epiclastic deposits accumulated in an older caldera forming about a tuff ring that is about 25 m in its thickest section with a basal consistent lava spatter dominated unit gradually transforming into a more scoria-dominated middle unit. A caldera-forming eruption in AD 2000 half-sectioned the Suona Crater exposing of its internal diatreme - crater in-fill - tephra rim succession providing a unique opportunity to understand the 3D architecture of the volcano. Toward the top of the preserved and exposed tuff ring section a clear gradual transition can be seen toward more abundance of chilled dark juvenile particles providing a matrix of a coarse ash that commonly hold cauliflower lapilli and bomb. This transition indicates that the eruption progressed from an early dry explosive phase such as lava fountaining to be a more Strombolian style explosive eruption that later on turned to be heavily influenced by external water producing debris jet dominated phreatomagmatic tephra and radially expanding pyroclastic density currents to deposit their load around the growing crater. This 3D architecture can only be explained if we infer that the original lower fissure-fed eruptions gradually allow melt to move toward the summit region where they hit ground water accumulated in an older caldera infill that hosted a succession of lava flows intercalated with lava foot and top breccias as well as abundant pyroclastic and reworked porous deposits capable to harvest water from rain and let them ponded along aquitard horizons in the caldera structure. We infer that such eruption mechanism is probably a common eruption style especially associated with volcanic islands with mafic stratovoclanoes that contain some summit caldera structures and located in humic and/or tropical climate.

Etude analytique et numérique de la réponse en vibration à hautes fréquences d'éprouvettes de fatigue vibratoire des métaux. Application aux aciers

NASA Astrophysics Data System (ADS)

Ben Aich, A.; El Kihel, B.; Kifani, A.; Sahban, F.

1994-07-01

In the present paper, the so-called " ultrasonic fatigue " or fatigue at very high frequency has been studied in the materials elastic behaviour case while neglecting the thermal effects that influence the mechanical fields. The determination of mechanical fields and specimen resonance length has been done both analytically and numerically. The numerical method used for this calculation is the finite element method (FEM). Martensitic steel " Soleil A2 " and austenitic steel " ICL 472 BC " have been considered in order to compare the two methods (analytical and numerical). It is shown that a perfect convergence is obtained between the two solutions. Dans le présent travail, la fatigue vibratoire a été étudiée dans le cas du comportement élastique des matériaux en négligeant les effets thermiques pouvant influencer les champs mécaniques. La détermination de ces champs et de la longueur de résonance des éprouvettes de fatigue a été faite analytiquement et numériquement. Le calcul numérique effectué se base sur la méthode des éléments finis. Dans le but d'une comparaison des solutions analytiques et numériques, deux aciers ont été considérés : un acier martensitique (Soleil A2) et un acier austénitique de type 18-10 (ICL 472 BC). Une parfaite convergence est obtenue entre les deux solutions.

In situ and laboratory investigations of fluid flow through an argillaceous formation at different scales of space and time, Tournemire tunnel, southern France

NASA Astrophysics Data System (ADS)

Boisson, Jean-Yves; Bertrand, Lucien; Heitz, Jean-François; Golvan, Yann Moreau-Le

2001-01-01

In the context of a research and development program on waste disposal, an experimental site (Tournemire tunnel, Aveyron, France) was selected by the French Institute for Nuclear Protection and Safety (IPSN) in order to undertake studies on potential fluid flow at different scales of space and time within a 250-m-thick argillaceous formation. The argillite has a low natural water content ( 3-5%) and very low radii access porosity. Diffusion (tritiated water) coefficients (1×10-12 to 2×10-11 m2/s) and hydraulic conductivities derived from different types of laboratory tests (10-14 to 10-13 m/s) are characteristics of a very low-permeable rock. In situ hydraulic tests (including long-term hydraulic-head measurements) were used to obtain values for hydraulic head and hydraulic conductivity at a scale of 1-10 m (10-13 to 10-11 m/s). Despite uncertainties on these data (due to a scale factor, presence of fissures, and possible artefacts due to hydro-chemo-mechanical coupling), it is expected that fluid flow is essentially governed by diffusion processes. Identification of possible natural flows at larger scales of time and space was investigated using natural isotopic tracers from interstitial fluids. Modelling, based on the deuterium profile along the clay formation and assuming pure diffusion processes, provides estimations of possible flow times. However, lack of knowledge concerning the past geological evolution of the site and the possible role of a fracture network do not permit reduction of uncertainties on these estimations at this stage. Résumé. Dans le cadre de son programme de recherche et développement sur les stockages de déchets, un site expérimental (tunnel de Tournemire, Aveyron, France) a été sélectionné par l'Institut de Protection et Sûreté Nucléaire (IPSN) pour conduire des études sur les possibilités de transferts de fluides à différentes échelles de temps et d'espace au sein d'une formation argileuse de 250 m d'épaisseur. L'argilite est caractérisée par de faibles teneurs en eau ( 3-5%) et de très petits rayons d'accès de pores. Les coefficients de diffusion à l'eau tritiée (1×10-12 à 2×10-11 m2/s) et les conductivités hydrauliques déduites de différents types d'essais au laboratoire (10-13 à 10-14 m/s) sont caractéristiques d'une roche très imperméable. Des tests hydrauliques in situ (y compris une mesure de charge à long terme) ont fourni des valeurs approchées des charges et un ordre de grandeur des perméabilités à l'échelle de 1-10 m (10-11 à 10-13 m/s). En dépit des incertitudes sur ces données (facteur d'échelle, présence de fissures, et artéfacts possibles dus aux couplages hydro-chimique et mécanique) on suppose que les transferts sont essentiellement gouvernés par des processus diffusifs. La reconnaissance de transferts naturels possible à une plus grande échelle de temps et d'espace a été étudiée à partir des traceurs isotopiques naturels des fluides interstitiels. Une modélisation, basée sur un profil en deutérium le long de la colonne argileuse et postulant un processus diffusif a permis de proposer une estimation de temps de transfert possible, mais le manque de connaissances précises au stade actuel de l'étude concernant l'évolution géologique passée du site et le rôle possible de la fracturation ne permet pas de réduire les incertitudes constatées sur ces estimations. Resumen. Dentro del contexto de un programa de investigación y desarrollo para la eliminación de residuos, el Instituto Francés de Protección Nuclear y Seguridad seleccionó un emplazamiento experimental en el túnel de Tournemire (Aveyron, Francia) para llevar a cabo estudios sobre el flujo potencial de fluídos a diferentes escalas temporales y espaciales, en una formación arcillosa de 250 m de espesor. La argilita tiene un contenido natural bajo de agua ( 3-5%) y una porosidad accesible muy pequeña. Los coeficientes de difusión de agua con tritio (entre 10-12 y 2×10-11 m2/s) y las conductividades hidráulicas calculadas a partir de diferentes ensayos de laboratorio (entre 10-13 y 10-14 m/s) son característicos de rocas de muy baja permeabilidad. Se hicieron ensayos hidráulicos in-situ (incluyendo medidas de nivel piezométrico de larga duración) para obtener valores del nivel piezométrico y de la conductividad hidráulica a una escala de 1-10 m (con valores entre 10-11 y 10-13 m/s). A pesar de las incertidumbres sobre estos datos (debido a factores de escala, a la presencia de fisuras y a posibles artificios ocasionados por el acoplamiento hidro-quimiomecánico), se espera que el flujo de fluídos esté esencialmente controlado por procesos de difusión. La identificación de posibles flujos naturales a escalas temporales y espaciales mayores fue investigada mediante trazadores isotópicos naturales del fluído intersticial. La modelación, basada en el perfil de deuterio a lo largo de la formación de arcilla y en la hipótesis de procesos puramente difusivos, proporciona estimaciones de posibles tiempos de tránsito. Sin embargo, la falta de conocimiento sobre la evolución geológica del lugar y sobre el rol potencial de una red de fracturas no permite reducir las incertidumbres asociadas, en el momento actual, a dichas estimaciones.

Tensions and Fissures: The Politics of Standardised Testing and Accountability in Ontario, 1995-2015

ERIC Educational Resources Information Center

Pinto, Laura Elizabeth

2016-01-01

While Ontario has received international accolades for its enactment of province-wide standardised testing upon the formation of the Education Quality and Accountability Office (EQAO), a closer look at provincial assessments over a 20-year span reveals successes as well as systemic tensions and fissures. The purpose of this paper is twofold.…

Rice fissure resistance QTLs from ‘Saber’ complement those from ‘Cypress’

USDA-ARS?s Scientific Manuscript database

The economic value of broken rice is about half that of whole milled rice, so one goal of producers, millers, and rice breeders is to reduce grain breakage during the dehusking and milling processes. One of the primary causes of rice breakage is fissuring, or cracking, of the rice before it enters ...

Identification of genetic loci underlying the kernel fissure-resistance exhibited by 'cypress' and 'saber'

USDA-ARS?s Scientific Manuscript database

The economic value of broken rice is about half that of whole milled rice, so one goal of producers, millers, and rice breeders is to reduce broken grains that result from the dehusking and milling processes One of the primary causes of rice breakage is fissuring, or cracking, of the rice before it ...

Ground fissures in the area of Mavropigi Village (N. Greece): Seismotectonics or mining activity?

NASA Astrophysics Data System (ADS)

Kalogirou, Eleni; Tsapanos, Theodoros; Karakostas, Vassilios; Marinos, Vassilios; Chatzipetros, Alexandros

2014-12-01

In the beginning of July 2010, a ground fissure was observed in the field near the village of Mavropigi (Northern Greece) and specifically in its NW side. Later on (early September), a second ground fissure was perceived, close and almost parallel to the first one and very close to the limits of the lignite exploitation mine (by the Public Power Corporation, PPC). It was observed that the village of Mavropigi slides away slowly towards the PPC lignite mine. Geological, seismological, as well as geotechnical survey in the field indicated that the phenomenon is related to the coal mining exploitation in the near vicinity of the village rather than to any seismotectonic activity in the surrounding area.

Des proprietes de l'etat normal du modele de Hubbard bidimensionnel

NASA Astrophysics Data System (ADS)

Lemay, Francois

Depuis leur decouverte, les etudes experimentales ont demontre que les supra-conducteurs a haute temperature ont une phase normale tres etrange. Les proprietes de ces materiaux ne sont pas bien decrites par la theorie du liquide de Fermi. Le modele de Hubbard bidimensionnel, bien qu'il ne soit pas encore resolu, est toujours considere comme un candidat pour expliquer la physique de ces composes. Dans cet ouvrage, nous mettons en evidence plusieurs proprietes electroniques du modele qui sont incompatibles avec l'existence de quasi-particules. Nous montrons notamment que la susceptibilite des electrons libres sur reseau contient des singularites logarithmiques qui influencent de facon determinante les proprietes de la self-energie a basse frequence. Ces singularites sont responsables de la destruction des quasi-particules. En l'absence de fluctuations antiferromagnetiques, elles sont aussi responsables de l'existence d'un petit pseudogap dans le poids spectral au niveau de Fermi. Les proprietes du modele sont egalement etudiees pour une surface de Fermi similaire a celle des supraconducteurs a haute temperature. Un parallele est etabli entre certaines caracteristiques du modele et celles de ces materiaux.

Analyse des possibilités de fonctionnement en régime des désexcitation des moteurs à aimants permanents

NASA Astrophysics Data System (ADS)

Multon, Bernard; Lucidarme, Jean; Prévond, Laurent

1995-05-01

In this paper, we study the extending of speed range of motors (or generators) with permanent magnet inductor and supplied by electronic converter. The amplitude of phase voltage and current waveforms are limited by electronics supply. The aim of this study is to achieve a maximum power near of the base speed one on an extended speed range. This require an airgap flux weakening so called “flux weakening” above base speed. A parametric analysis of motor electromagnetic characteristics is made to show the influence of armature reaction and magnetic saliency on speed range. We show that exists an ideal condition to obtain a constant power speed range theoretically unlimited. Magnetic saliency permits to enhance the power factor especially when L_d> L_q. As main hypotheses, we consider no saturation, e.m.f. and current sine waveforms and a sinusoidal airgap flux density. Finally, we recapitulate the permanent magnet rotor structures able to obtain a flux-weakening operation. Cet article traite de l'extension de la plage de vitesse des moteurs (ou alternateurs) à excitation par aimants permanents et alimentés par convertisseur électronique. La tension et le courant sont limités en amplitude par l'alimentation électronique.L'objectif est d'obtenir une puissance proche de celle correspondant au régime de base sur une plage de vitesse étendue. Ceci nécessite une réduction de flux d'entrefer ou “désexition” au delà de la vitesse de base. Une analyse paramétrique des caractéristiques du moteur est effectuée pour mettre en évidence l'influence de la réaction d'induit et de la saillance magnétique. Nous montrons qu'il existe une condition idéale pour obtenir une plage de fonctionnement à puissance constante théoriquement illimitée. La saillance magnétique permet d'accroître le facteur de puissance surtout lorsque L_d> L_q. Les principales hypothèses de cette étude sont l'absence de saturation, des f.e.m. et des courants sinusoïdaux et une induction spatiale sinusoïdale dans l'entrefer. Enfin, nous effectuons un bilan des structures de rotors permettant un fonctionnement en régime de désexcitation.

Comprendre l'influence des facteurs contextuels sur la participation communautaire à la santé : une étude de cas dans le district sanitaire de Tenkodogo, au Burkina Faso.

PubMed

Sombié, Issa; Ilboudo, David O S; Soubeiga, André Kamba; Samuelsen, Helle

2017-09-01

Le Burkina Faso met en œuvre depuis plusieurs années la stratégie de la participation communautaire. Des comités de gestion (CoGes) ont été mis en place dans les centres de santé de la première ligne et doivent participer aux prises de décisions. L'objectif principal de cette stratégie est de favoriser l'utilisation des services de santé et une adhésion massive des communautés aux activités de promotion de la santé. Seulement, on constate que les résultats escomptés par les autorités sanitaires tardent à se réaliser. Le présent article convoque les facteurs liés au contexte socioculturel du district sanitaire, pour analyser le phénomène de la participation communautaire. L'étude s'est déroulée dans le district sanitaire de Tenkodogo, situé dans la région administrative du Centre-est, à environ 190 km de la capitale. Cette étude exclusivement qualitative, a utilisé deux méthodes de collecte : les entretiens individuels et les focus groups. Les participants à l'étude sont les chefs de ménage ( n = 48), les membres des CoGes ( n = 10), les agents de santé ( n = 8) et les agents de santé communautaire ( n = 24). La méthode de l'analyse de contenu a été utilisée pour l'analyse des données. Les résultats de l'étude montrent que plusieurs facteurs socioculturels influencent la dynamique de la participation communautaire dans le district. Ce sont les conditions économiques, la perception négative des services de santé, les inégalités sociales de sexe et d'âge, le faible ancrage social des organisations communautaires, les rivalités inter-villages et les conflits coutumiers. L'étude relève également que les communautés ne perçoivent pas leur implication dans le processus décisionnel des services de santé comme une priorité. Leurs principales attentes s'orientent vers la disponibilité de soins de qualité et à coût réduit.

Synthese, etude structurale et electrochimique des materiaux d'electrode positive d'oxydes mixtes lithium cobalt nickel oxide (0 /= 1) pour les batteries rechargeables au lithium

NASA Astrophysics Data System (ADS)

Grincourt, Yves

Depuis une dizaine d'annees, on observe un interet grandissant pour les batteries rechargeables au lithium de tension superieure a 4 volts. La commercialisation de ces batteries pour l'electronique grand marche tend de plus en plus a supplanter celle des accumulateurs Ni-Cd et Ni-MH, de tension nominate 1,2 V. Ces batteries au lithium font appel a des materiaux d'electrode positive (cathode a la decharge) du type oxydes mixtes de metaux de transition LiMnO 2, LiMn2O4, LiNiO2 ou LiCoO2. Si le compose LiCoO2 est relativement aise a synthetiser, il n'en demeure pas moins que le cobalt reste un metal plus couteux compare au nickel et au manganese. La synthese de LiNiO2, quart a elle, demeure un probleme du point de vue stoechiometrique. Un defaut de lithium (5 a 10% molaire) conduira a des proprietes electrochimiques mediocres de la batterie. Dans cette etude nous nous proposons donc de preparer par voie humide et par voie seche les materiaux d'electrode positive de la famille LiCoyNi1-yO2 aver (0 ≤ y ≤ 1) et d'etudier en detail l'influence du pourcentage de nickel et de cobalt sur les proprietes electrochimiques des oxydes mixtes Li-Ni-Co. Une des caracteristiques est la morphologie plus fine des poudres de materiaux, observes par microscopie electronique a balayage (MEB). Un traitement thermique a plus basse temperature (750°C) que pour LiCoO2 (850°C) ainsi qu'un leger exces de lithium dans la preparation, ont permis d'aboutir a un materiau de stoechiometrie quasi parfaite. Neanmoins, le role de pilfer joue par 2 a 4% de moles de Ni2+ presents sur les sites lithium, permet de conserver intacte la structure hexagonale de la maille entre deux cycles consecutifs. Afin de mieux comprendre l'influence du vieillissement dune demi-pile Li/LiMeO2 (Me = Ni, Co) a temperature ambiante, des etudes electrochimiques et d'impedance spectroscopique ont ete menees en parallele. Le vieillissement de la cellule s'accompagne seulement dune chute de son potentiel due a son auto-decharge. Neanmoins, il est encore possible de la relancer en cyclage par la suite. Une baisse de la valeur de la resistance totale interfaciale et des frequences au sonnet semble indiquer une modification chimique et/ou structurale des films de passivations, pent-etre due a une transformation de ces films lors du cyclage ou a leur degradation. (Abstract shortened by UMI.)

Noninvasive pit and fissure sealing: microtensile bond strength to intact bovine enamel of different pit and fissure sealants in a simplified fissure model.

PubMed

Papacchini, Federica; Cury, Alvaro H; Goracci, Cecilia; Chieffi, Nicoletta; Tay, Franklin R; Polimeni, Antonella; Ferrari, Marco

2006-12-01

To measure the microtensile bond strength of different pit and fissure sealants in a simplified fissure model. Twenty extracted bovine mandibular permanent incisors were randomly divided into 4 groups for treatment: G1: 35% phosphoric acid/Clinpro Sealant; G2: 35% phosphoric acid/Delton; G3: Non-Rinse Conditioner/Dyract Seal; G4: 20% polyacrylic acid/Fuji IILC. Each tooth was sectioned into 6 pieces (4 x 6 mm) of buccal enamel. SEM examination was used to confirm the presence of aprismatic enamel on each tooth. Using a spacer, two pieces of etched enamel were secured to a glass slide at a mean distance of 0.6+/-0.1 mm. The space between enamel substrates was then etched/conditioned and sealed with different materials according to the tested groups. By serially cutting each double-bonded sample, multiple beam-shaped specimens about 0.8mm(2) in cross section were obtained and tested in tension (0.5 mm/min) until failure occurred at either one of the two stressed interfaces. Failure modes were classified by stereomicroscopy. G1 and G2 showed statistically higher bond strengths than G3 and G4. G4 demonstrated the significantly lowest bond strength. Failures were mostly adhesive in G1, G2, G3, and mainly cohesive/mixed in G4. According to this model, resin-based materials (Clinpro Sealant, Delton) showed better microtensile bond strength than compomer (Dyract Seal) or resin-modified glass ionomer (Fuji IILC).

Topographic measurements of eyelids and orbit in enucleated eyes with hydroxyapatite integrated implant versus PMMA implant.

PubMed

Gradinaru, S; Totir, M; Iancu, R; Leasu, C; Pricopie, S; Yasin, S; Ciuluvica, R; Ungureanu, E

2014-01-01

This study reports our results relating to palpebral eyelid fissure and orbital measurements following evisceration with orbital implantation of hydroxyapatite integrated implant and PMMA implant. This study is a prospective study of 43 patients that underwent evisceration for different ocular affections at University Emergency Hospital Bucharest, Ophthalmology department between January 2009 and September 2010 (Group A comprising of twenty patients had the coralline hydroxyapatite implant -Integrated Ocular Implants, USA and Group B comprising of twenty-three received non-integrated PMMA ocular implants) .The outcomes measured were the degree of exo /enophthalmos, horizontal eyelid fissure and palpebral fissure height at 4 years after surgical intervention related to measurement to the contralateral eye. Horizontal eyelid fissure (HEF) was suffering a shortening of 7.4% in the group B versus the contralateral eye, and only 1.9% in the group A related to the contralateral eye. Eyelid fissure height was greater in the group B with 5.2% regarding the contralateral eye, and 1.2% in group A. The degree of enophthalmia was higher in the group B of 4 mm versus the contralateral eye and lower in group A 1.5 mm regarding the contralateral eye. . Although a hydroxyapatite implant may be not as economic as a PMMA implant, a patient must be warned about the effect on its ocular structures in time and that cosmetic appearance over years will change more dramatically than in the fellow normal eye. Therefore preoperative counseling of the patient is crucial in long term patient satisfaction.

Mutation of SALL2 causes recessive ocular coloboma in humans and mice

PubMed Central

Kelberman, Daniel; Islam, Lily; Lakowski, Jörn; Bacchelli, Chiara; Chanudet, Estelle; Lescai, Francesco; Patel, Aara; Stupka, Elia; Buck, Anja; Wolf, Stephan; Beales, Philip L.; Jacques, Thomas S.; Bitner-Glindzicz, Maria; Liasis, Alki; Lehmann, Ordan J.; Kohlhase, Jürgen; Nischal, Ken K.; Sowden, Jane C.

2014-01-01

Ocular coloboma is a congenital defect resulting from failure of normal closure of the optic fissure during embryonic eye development. This birth defect causes childhood blindness worldwide, yet the genetic etiology is poorly understood. Here, we identified a novel homozygous mutation in the SALL2 gene in members of a consanguineous family affected with non-syndromic ocular coloboma variably affecting the iris and retina. This mutation, c.85G>T, introduces a premature termination codon (p.Glu29*) predicted to truncate the SALL2 protein so that it lacks three clusters of zinc-finger motifs that are essential for DNA-binding activity. This discovery identifies SALL2 as the third member of the Drosophila homeotic Spalt-like family of developmental transcription factor genes implicated in human disease. SALL2 is expressed in the developing human retina at the time of, and subsequent to, optic fissure closure. Analysis of Sall2-deficient mouse embryos revealed delayed apposition of the optic fissure margins and the persistence of an anterior retinal coloboma phenotype after birth. Sall2-deficient embryos displayed correct posterior closure toward the optic nerve head, and upon contact of the fissure margins, dissolution of the basal lamina occurred and PAX2, known to be critical for this process, was expressed normally. Anterior closure was disrupted with the fissure margins failing to meet, or in some cases misaligning leading to a retinal lesion. These observations demonstrate, for the first time, a role for SALL2 in eye morphogenesis and that loss of function of the gene causes ocular coloboma in humans and mice. PMID:24412933

Closure of the middle ear with special reference to the development of the tegmen tympani of the temporal bone

PubMed Central

Rodríguez-Vázquez, José Francisco; Murakami, Gen; Verdugo-López, Samuel; Abe, Shin-ichi; Fujimiya, Mineko

2011-01-01

Closure of the middle ear is believed to be closely related to the evolutionary development of the mammalian jaw. However, few comprehensive descriptions are available on fetal development. We examined paraffin-embedded specimens of 20 mid-term human fetuses at 8–25 weeks of ovulation age (crown-rump length or CRL, 38–220 mm). After 9 weeks, the tympanic bone and the squamous part of the temporal bone, each of which was cranial or caudal to Meckel's cartilage, grew to close the lateral part of the tympanosquamosal fissure. At the same time, the cartilaginous tegmen tympani appeared independently of the petrous part of the temporal bone and resulted in the petrosquamosal fissure. Subsequently, the medial part of the tympanosquamosal fissure was closed by the descent of a cartilaginous inferior process of the tegmen tympani. When Meckel's cartilage changed into the sphenomandibular ligament and the anterior ligament of the malleus, the inferior process of the tegmen tympani interposed between the tympanic bone and the squamous part of the temporal bone, forming the petrotympanic fissure for the chorda tympani nerve and the discomalleolar ligament. Therefore, we hypothesize that, in accordance with the regression of Meckel's cartilage, the rapidly growing temporomandibular joint provided mechanical stress that accelerated the growth and descent of the inferior process of the tegmen tympani via the discomalleolar ligament. The usual diagram showing bony fissures around the tegmen tympani may overestimate the role of the tympanic bone in the fetal middle-ear closure. PMID:21477146

Modeling plaque fissuring and dissection during balloon angioplasty intervention.

PubMed

Gasser, T Christian; Holzapfel, Gerhard A

2007-05-01

Balloon angioplasty intervention is traumatic to arterial tissue. Fracture mechanisms such as plaque fissuring and/or dissection occur and constitute major contributions to the lumen enlargement. However, these types of mechanically-based traumatization of arterial tissue are also contributing factors to both acute procedural complications and chronic restenosis of the treatment site. We propose physical and finite element models, which are generally useable to trace fissuring and/or dissection in atherosclerotic plaques during balloon angioplasty interventions. The arterial wall is described as an anisotropic, heterogeneous, highly deformable, nearly incompressible body, whereas tissue failure is captured by a strong discontinuity kinematics and a novel cohesive zone model. The numerical implementation is based on the partition of unity finite element method and the interface element method. The later is used to link together meshes of the different tissue components. The balloon angioplasty-based failure mechanisms are numerically studied in 3D by means of an atherosclerotic-prone human external iliac artery, with a type V lesion. Image-based 3D geometry is generated and tissue-specific material properties are considered. Numerical results show that in a primary phase the plaque fissures at both shoulders of the fibrous cap and stops at the lamina elastica interna. In a secondary phase, local dissections between the intima and the media develop at the fibrous cap location with the smallest thickness. The predicted results indicate that plaque fissuring and dissection cause localized mechanical trauma, but prevent the main portion of the stenosis from high stress, and hence from continuous tissue damage.

The temporal requirement for vitamin A in the developing eye: mechanism of action in optic fissure closure and new roles for the vitamin in regulating cell proliferation and adhesion in the embryonic retina.

PubMed

See, Angela Wai-Man; Clagett-Dame, Margaret

2009-01-01

Mammalian eye development requires vitamin A (retinol, ROL). The role of vitamin A at specific times during eye development was studied in rat fetuses made vitamin A deficient (VAD) after embryonic day (E) 10.5 (late VAD). The optic fissure does not close in late VAD embryos, and severe folding and collapse of the retina is observed at E18.5. Pitx2, a gene required for normal optic fissure closure, is dramatically downregulated in the periocular mesenchyme in late VAD embryos, and dissolution of the basal lamina does not occur at the optic fissure margin. The addition of ROL to late VAD embryos by E12.5 restores Pitx2 expression, supports dissolution of the basal lamina, and prevents coloboma, whereas supplementation at E13.5 does not. Surprisingly, ROL given as late as E13.5 completely prevents folding of the retina despite the presence of an open fetal fissure, showing that coloboma and retinal folding represent distinct VAD-dependent defects. Retinal folding due to VAD is preceded by an overall reduction in the percentage of cyclin D1 positive cells in the developing retina, (initially resulting in retinal thinning), as well as a dramatic reduction in the cell adhesion-related molecules, N-cadherin and beta-catenin. Reduction of retinal cell number combined with a loss of the normal cell-cell adhesion proteins may contribute to the collapse and folding of the retina that occurs in late VAD fetuses.

Anal self-massage in the treatment of acute anal fissure: a randomized prospective study.

PubMed

Gaj, Fabio; Biviano, Ivano; Candeloro, Laura; Andreuccetti, Jacopo

2017-01-01

An anal fissure (AF) is a tear in the epithelial lining of the anal canal. This is a very common condition, but the choice of treatment is unclear. The use of anal dilators is effective, economic, and safe. The aim of the study was to compare the efficacy of two conservative treatments, the use of anal dilators or a finger for anal dilatation, in reducing anal pressure and resolving anal fissures. Fifty patients with a clinical diagnosis of AF were randomly assigned to one of the treatments, self-massage of the anal sphincter (group A, 25 patients) or passive dilatation using dilators (group B, 25 patients). All patients were evaluated at baseline, at the end of treatment, and after 12 weeks and 6 months. Pain was measured using a visual analog scale. After the treatment, 60% of patients treated with dilators and 80% of patients treated with anal self-massage using a finger showed disappearance of their anal fissures. A comparison between signs and symptoms reported by the patients in the two groups showed a statistically significant reduction in anal pain (group A, P=0.0001; group B, P=0.0001) and bleeding after defecation (group A, P=0.001, group B, P=0.001). At 6 months after treatment, a significantly greater reduction in anal pain was observed in Group A compared to Group B (P=0.02). The use of anal self-massage with a finger appears to induce a better resolution of acute anal fissure than do anal dilators, and in a shorter time.

Caracterisation des revetements par projection thermique a haute vitesse obtenus a partir de differentes poudres de wc-10co-4cr pour des applications en aeronautique =

NASA Astrophysics Data System (ADS)

Quintero Malpica, Alfonso

Les revetements par projection thermique HVOF (High Velocity Oxy-Fuel) sont communement utilises dans l'industrie aeronautique, notamment au sein du partenaire industriel du projet (Tecnickrome Aeronautique Inc), comme des remplacants pour les revetements produits par l'electrodeposition du chrome dur due aux problemes environnementaux. Ce projet avait pour but de trouver une poudre alternative a celle qui est actuellement utilisee pour la production des revetements de type WC-10Co-4Cr obtenus avec la technologie de projection thermique a haute vitesse HVOF et en utilisant le systeme de projection HVOF-JET KOTERTM III. Dans un premier temps, cinq poudres incluant celle de reference, ayant des distributions granulometriques differentes, ont ete projetees dans le but d'identifier quelles poudres pouvaient etre utilisees avec le systeme de projection HVOF-JET KOTERTM III en gardant des parametres similaires (debit d'hydrogene, debit d'oxygene, debit de poudre et distance de projection) que pour la poudre de reference. Les revetements obtenus a partir des poudres etudiees ont ete evalues selon les criteres d'acceptation des revetements sollicites par les principaux manufacturiers des trains d'atterrissage. Les tests ont porte sur l'epaisseur, l'adhesion, la microstructure, la microdurete, les contraintes residuelles et la rugosite. A partir des resultats obtenus, seulement deux poudres ont rencontre toutes les proprietes demandees par les specifications aeronautiques. L'influence de la variation de la distance de projection sur la qualite des revetements a ete etudiee. Cinq distances (100, 125, 150, 175 et 200 mm) ont ete choisies pour faire la projection des deux poudres selectionnees. Les revetements obtenus ont montre de proprietes des revetements similaires (epaisseur, adhesion, microstructure, microdurete, contraintes residuelles et rugosite). Il a ete trouve que la distance de projection est un parametre indirect du systeme de projection HVOF-JET KOTERTM III et qu'autant la vitesse que la temperature des particules semblent mieux determiner les proprietes du revetement, en particulier, les niveaux de contraintes residuelles finales dans les revetements. Lorsque les revetements sont produits a de courtes distances de projection, les particules arrivent avec plus grande vitesse et temperature ce qui resulte dans de plus grandes temperatures du substrat et plus grande energie d'impact, resultant dans de plus grandes contraintes residuelles de compression dans les revetements.

Improvement in the technological feasibility of a web-based dietary survey system in local settings.

PubMed

Jung, Hyun Ju; Lee, Sang Eun; Kim, Dongwoo; Noh, Hwayoung; Song, Sujin; Kang, Minji; Song, Yoon Ju; Paik, Hee-Young

2015-01-01

The feasibility of a dietary survey tool is crucial for successful nutritional assessment via a community survey and for nutritional epidemiology. In 2012, we identified a newly developed computerized dietary survey system, the Diet Evaluation System (DES), which could be successfully applied to a community survey delivered during home visits using notebook computers when the internet environment was adequate, using either a WiBro modem or a smartphone as a tethered modem. In 2013, we retested DES feasibility using various mobile devices and in a larger number of subjects. We conducted a total of 430 interviews, representing two for each of 215 subjects of various ages, using tablet personal computers (PCs) and laptops. In addition, a group discussion with the interviewers was conducted. The interview success rate was improved to 84% (compared to 67% in 2012). Completing each interview took 14 min 1 s, and data processing was conducted automatically. The subjects' age, gender, and the type of mobile device used influenced the DES interview time. This study implies that the DES is an effective one-stop dietary survey system for use in a local setting. The interviewers' group discussion revealed that a one-stop system using the DES is convenient and that DES optimization for tablet PCs and continued database updating is needed.

Polymorphisme de l'apolipoprotéine E dans la population du nord du Maroc: fréquence et influence sur les paramètres lipidiques

PubMed Central

Benyahya, Fatiha; Barakat, Amina; Ghailani, Naima; Bennani, Mohcine

2013-01-01

Introduction L'objectif de ce travail est de déterminer les fréquences alléliques et génotypiques des sites polymorphes situés dans le gène de l'apolipoprotéine E (apo E) ainsi que leur impact sur les paramètres cliniques et lipidiques dans un échantillon de la population du nord du Maroc cliniquement diagnostiqué ADH. Méthodes Le génotype de l'apo E a été analysé par séquençage direct chez 46 patients cliniquement diagnostiqués ADH selon les critères standards. Résultats Les fréquences des allèles epsilon 3, epsilon 2 et epsilon 4 ont été respectivement 78.3%, 2.2% et 19.6%. La fréquence de l'allèle epsilon 4 est très élevée chez la population du nord du Maroc en comparaison avec les populations des autres régions marocaines. Elle est similaire à celle rapportée dans les pays de l'Europe du nord. Les taux du cholestérol total, du cholestérol LDL ainsi que la présence des xanthomes et les maladies cardiovasculaires ne différent pas entre les génotypes de l'apoE. En revanche, les résultats ont montré une influence de l'allèle epsilon4 sur le taux des triglycérides chez les sujets obèses. Conclusion Le génotype de l'apoE ne peut expliquer le phénotype clinique et biochimique présenté par des patients du Nord du Maroc cliniquement diagnostiqués ADH. PMID:24396563

Gestion des déchets ménagers dans l’aire de santé Bulaska à Mbuji-Mayi en République Démocratique du Congo

PubMed Central

Kangoy, Kasangye; Ngoyi, John; Mudimbiyi, Olive

2016-01-01

Introduction La présence des déchets ménagers dans les voies publiques a une influence sur l’hygiène de l’environnement, ils entrainent l’insalubrité et peuvent être facteurs des certaines maladies dont quelques-unes peuvent être épidémiques. Au cours des deux dernières décennies, la question de la gestion des déchets est devenue de plus en plus complexe autant pour les pays développés que ceux sous-développés. L’objectif de cette étude était de déterminer les types de déchets et le mode de gestion des déchets génère par les ménages. Méthodes Cette étude est descriptive transversale, réalisée dans l’aire de sante Bulaska, Kasaï oriental, c’est une approche prospective appuyée par l’interview et l’observation active. Le questionnaire a été adressé au responsable du ménage ou au délègue, du 21 au 25 juin 2010, sur 170 ménages ce qui constituent un échantillon de convenance. Résultats Cette étude a révélé ce qui suit: 94,7% des enquêtes qui avaient répondu a notre questionnaire étaient de sexe féminin; 47% des enquêtes avaient un niveau d’étude primaire; 41,1% des enquêtes étaient des ménagères; la taille médiane de ménage était de 7 personnes par ménage; dans 83,5% des cas les déchets génères étaient solides; 50% des ménages de l’aire de sante utilisent la voie publique comme poubelle. Conclusion Eu égard au résultat de cette étude, développer plus les programmes de sensibilisation sur l’assainissement de l’environnement s’avère nécessaire. PMID:27800105

Early generation selection for rice fissure resistance proves effective and indicates a fissure resistance gene on chromsome 1

USDA-ARS?s Scientific Manuscript database

Whole rice kernels have two to three times more market value than brokens, which means that any reduction in milling yield results in financial losses for both rice producers and millers. One of the leading causes of reduced milling yield is exposure of the rice kernels to severe moisture changes b...

Treatment for anal fissure: Is there a safe option?

PubMed

Brady, Justin T; Althans, Alison R; Neupane, Ruel; Dosokey, Eslam M G; Jabir, Murad A; Reynolds, Harry L; Steele, Scott R; Stein, Sharon L

2017-10-01

Surgeons often approach anal fissure with chemical denervation (Botulinum toxin, BT) instead of initial lateral internal sphincterotomy (LIS) due to concerns for long-term incontinence. We evaluated the characteristics and outcomes of patients who received BT or LIS. We performed a retrospective chart review of patients undergoing LIS and BT for anal fissure between 2009 and 2015. In 2015, a telephone survey was performed to evaluate durability, long-term incontinence and patient satisfaction. Ninety-four patients met criteria: 73 LIS and 21 BT. Age (BT 49 vs. LIS 52) was similar between groups (p = 1.0). Cleveland Clinic Fecal Incontinence (CCFI) score pre-intervention was higher in BT than LIS patients (2.1 vs. 0.4, p = 0.007) with fewer BT patients with perfect continence (50% vs. 88%). Telephone survey response was 61%. Fissure recurrence was significantly higher for BT than LIS patients (36% vs. 9%, p = 0.03). Patients undergoing LIS were less likely to recur. Both LIS and BT patients had some durable changes in continence raising the question of whether there is a safe technique. Copyright © 2017 Elsevier Inc. All rights reserved.

Propagation of dikes at Vesuvio (Italy) and the effect of Mt. Somma

NASA Astrophysics Data System (ADS)

Acocella, V.; Porreca, M.; Neri, M.; Massimi, E.; Mattei, M.

2006-04-01

Dikes provide crucial information on how magma propagates within volcanoes. Somma-Vesuvio (Italy) consists of the active Vesuvio cone, partly bordered by the older Mt. Somma edifice. Historical chronicles on the fissure eruptions in 1694-1944 are matched with an analytical solution to define the propagation path of the related dikes and to study any control of the Mt. Somma relief. The fissures always consisted of the downslope migration of vents from an open summit conduit, indicating lateral propagation as the predominant mechanism for shallow dike emplacement. No fissure emplaced beyond Mt. Somma, suggesting that its buttressing hinders the propagation of the radial dikes. An analytical solution is defined to describe the mechanism of formation of the laterally propagating dikes and to evaluate the effect of topography. The application to Somma-Vesuvio suggests that, under ordinary excess magmatic pressures, the dikes should not propagate laterally at depths >240-480 m below the surface, as the increased lithostatic pressure requires magmatic pressures higher than average. This implies that, when the conduit is open, the lateral emplacement of dikes is expectable on the S, W and E slopes. The lack of fissures N of Mt. Somma is explained by its buttressing, which hinders dike propagation.

Soil gas geochemistry in relation to eruptive fissures on Timanfaya volcano, Lanzarote Island (Canary Islands, Spain)

NASA Astrophysics Data System (ADS)

Padrón, Eleazar; Padilla, Germán; Hernández, Pedro A.; Pérez, Nemesio M.; Calvo, David; Nolasco, Dácil; Barrancos, José; Melián, Gladys V.; Dionis, Samara; Rodríguez, Fátima

2013-01-01

We report herein the first results of an extensive soil gas survey performed on Timanfaya volcano on May 2011. Soil gas composition at Timanfaya volcano indicates a main atmospheric source, slightly enriched in CO2 and He. Soil CO2 concentration showed a very slight deep contribution of the Timanfaya volcanic system, with no clear relation to the main eruptive fissures of the studied area. The existence of soil helium enrichments in Timanfaya indicates a shallow degassing of crustal helium and other possible deeper sources probably form cooling magma bodies at depth. The main soil helium enrichments were observed in good agreement with the main eruptive fissures of the 1730-36 eruption, with the highest values located at those areas with a higher density of recent eruptive centers, indicating an important structural control for the leakage of helium at Timanfaya volcano. Atmospheric air slightly polluted by deep-seated helium emissions, CO2 degassed from a cooling magma body, and biogenic CO2, might be the most plausible explanation for the existence of soil gas. Helium is a deep-seated gas, exhibiting important emission rates along the main eruptive fissure of the 1730-36 eruption of Timanfaya volcano.

River of Sand

NASA Image and Video Library

2016-09-21

A dominant driver of surface processes on Mars today is aeolian (wind) activity. In many cases, sediment from this activity is trapped in low-lying areas, such as craters. Aeolian features in the form of dunes and ripples can occur in many places on Mars depending upon regional wind regimes. The Cerberus Fossae are a series of discontinuous fissures along dusty plains in the southeastern region of Elysium Planitia. This rift zone is thought to be the result of combined volcano-tectonic processes. Dark sediment has accumulated in areas along the floor of these fissures as well as inactive ripple-like aeolian bedforms known as "transverse aeolian ridges" (TAR). Viewed through HiRISE infrared color, the basaltic sand lining the fissures' floor stands out as deep blue against the light-toned dust covering the region. This, along with the linearity of the fissures and the wave-like appearance of the TAR, give the viewer an impression of a river cutting through the Martian plains. However, this river of sand does not appear to be flowing. Analyses of annual monitoring images of this region have not detected aeolian activity in the form of ripple migration thus far. http://photojournal.jpl.nasa.gov/catalog/PIA21063

Effets de la formation sur la violence conjugale

PubMed Central

Zaher, Eman; Keogh, Kelly; Ratnapalan, Savithiri

2014-01-01

Résumé Objectif Décrire et évaluer l’efficacité de la formation concernant la violence conjugale pour améliorer les connaissances et permettre la reconnaissance et la prise en charge par les médecins des femmes victimes de violence. Sources des données On a fait une recension dans la base de données des révisions systématiques de Cochrane, MEDLINE, PubMed, PsycINFO, ERIC et EMBASE pour trouver des articles publiés entre le 1e janvier 2000 et le 1e novembre 2012. Des recherches manuelles ont complété cette recension pour cerner des articles pertinents à l’aide d’une stratégie de recherche combinant des textes, mots et expressions MeSH. Sélection des études On a choisi des études randomisées contrôlées qui portaient sur des interventions éducatives à l’intention des médecins et fournissaient des données sur les effets des interventions. Synthèse On a inclus 9 études randomisées contrôlées qui décrivaient différentes approches pédagogiques et diverses mesures des résultats. Trois études examinaient les effets d’interventions éducatives pour des médecins en formation postdoctorale et ont constaté une augmentation des connaissances, mais il n’y a eu aucun changement dans le comportement en ce qui a trait à l’identification des victimes de violence conjugale. Six études portaient sur des interventions éducatives pour des médecins en pratique active. Trois d’entre elles utilisaient une approche à multiples facettes pour les médecins, qui combinait une formation ainsi que des interventions de soutien de la part du système pour changer les comportements des médecins, comme une sensibilisation générale accrue à la violence conjugale au moyen de brochures et d’affiches, des aide-mémoire pour rappeler aux médecins comment identifier les victimes, des moyens pour faciliter l’accès des médecins à des services de soutien pour les victimes, la réalisation d’audits et la fourniture de rétroaction. Les interventions éducatives à multiples facettes prenaient la forme d’ateliers interactifs, d’apprentissage sur le web et de formation expérientielle. Une autre étude utilisait des discussions de groupes témoins et de la formation et a permis de constater une amélioration dans le signalement de la violence conjugale par les médecins. Les 2 autres études ont relevé une meilleure perception par les médecins en pratique de leur confiance en eux à l’aide d’apprentissage par problèmes en ligne. Conclusion Il a été difficile de déterminer quelle stratégie pédagogique était la plus efficace étant donné que les interventions éducatives et les mesures des résultats variaient entre les études choisies. De brèves interventions pour les médecins en formation postdoctorale amélioraient les connaissances mais ne semblaient pas influencer les comportements. La formation en ligne sous forme d’apprentissage par problèmes améliorait les perceptions des médecins en pratique, leurs connaissances et leurs habiletés quant à la prise en charge de la violence conjugale. La formation des médecins combinée à des interventions de soutien de la part du système semblait bénéfique aux victimes de violence conjugale et augmentait le nombre de demandes de consultations auprès des ressources de soutien à leur intention.

Underclad cracking of pressure vessel steels for light-water reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopez, H.F.

1987-06-01

Although fracture mechanics analyses have shown that underclad cracks have no detrimental effect on the integrity of thick walled pressure vessels (40 year service), in order to avoid unexpected failures the US Nuclear Regulatory Commission has issued Regulatory Guide 1.43 which sets limits on the extent of fissures permitted and describes acceptable means of controlling the weld cladding processes. Cavitation and intergranular fissuring in SA508-2 and 22NiMoCr37 steels can occur in the presence or absence of intergranular particles. The observations of intergranular fissuring and cavitation in those HAZ free from overlapping effects are attributed to grain boundary segregation. Other probablemore » void nucleation sites are the grain boundary-lath interface intersections which facilitate the formation of grain boundary discontinuities.« less

Influence of water vapour and permanent gases on the atmospheric optical depths and transmittance

NASA Astrophysics Data System (ADS)

Badescu, V.

1991-05-01

The influence of the atmospheric state on the extinction of direct solar radiation has been studied by using a four layer atmospheric model. Simple analytical formulae are established for the spectral optical depths of permanent gases and water vapour. These formulae use the ground level values of air pressure, temperature and relative huniidity. An additional parameter, related to the vertical distribution of the hunmidity content, is used for a better estimation of the water vapour optical depth. Good agreement between theory and measurements is found. The paper shows the dependence of the atmospheric spectral transmittance on the above mentioned parameters. L'influence de l'état atmosphérique sur l'extinction de la radiation solaire directe a été étudiée à l'aide d'un modèle atmosphérique développé antérieurement par l'auteur. Des formules simples ont été établies pour l'épaisseur optique spectrale des gaz et de la vapeur d'eau. Ces formules utilisent les valeurs de la pression atmosphérique, de la température et de l'humidité relative, mesurées au niveau du sol. Un paramètre supplémentaire, lié à la distribution verticale du contenu d'humidité, est utilisé pour calculer l'épaisseur optique due à la vapeur d'eau. La théorie est en bon accord avec les résultats des mesures. Le travail montre la dépendance de la transmittance atmosphérique spectrale en fonction des paramètres spécifiés ci-dessus.

Biodegradable Polymers Influence the Effect of Atorvastatin on Human Coronary Artery Cells

PubMed Central

Strohbach, Anne; Begunk, Robert; Petersen, Svea; Felix, Stephan B.; Sternberg, Katrin; Busch, Raila

2016-01-01

Drug-eluting stents (DES) have reduced in-stent-restenosis drastically. Yet, the stent surface material directly interacts with cascades of biological processes leading to an activation of cellular defense mechanisms. To prevent adverse clinical implications, to date almost every patient with a coronary artery disease is treated with statins. Besides their clinical benefit, statins exert a number of pleiotropic effects on endothelial cells (ECs). Since maintenance of EC function and reduction of uncontrolled smooth muscle cell (SMC) proliferation represents a challenge for new generation DES, we investigated the effect of atorvastatin (ATOR) on human coronary artery cells grown on biodegradable polymers. Our results show a cell type-dependent effect of ATOR on ECs and SMCs. We observed polymer-dependent changes in IC50 values and an altered ATOR-uptake leading to an attenuation of statin-mediated effects on SMC growth. We conclude that the selected biodegradable polymers negatively influence the anti-proliferative effect of ATOR on SMCs. Hence, the process of developing new polymers for DES coating should involve the characterization of material-related changes in mechanisms of drug actions. PMID:26805825

Low intensity hawaiian fountaining as exemplified by the March 2011, Kamoamoa eruption at Kilauea Volcano, Hawai`i (Invited)

NASA Astrophysics Data System (ADS)

Orr, T. R.; Houghton, B. F.; Poland, M. P.; Patrick, M. R.; Thelen, W. A.; Sutton, A. J.; Parcheta, C. E.; Thornber, C. R.

2013-12-01

The latest 'classic' hawaiian high-fountaining activity at Kilauea Volcano occurred in 1983-1986 with construction of the Pu`u `O`o pyroclastic cone. Since then, eruptions at Kilauea have been dominated by nearly continuous effusive activity. Episodes of sustained low hawaiian fountaining have occurred but are rare and restricted to short-lived fissure eruptions along Kilauea's east rift zone. The most recent of these weakly explosive fissure eruptions--the Kamoamoa eruption--occurred 5-9 March 2011. The Kamoamoa eruption was probably the consequence of a decrease in the carrying capacity of the conduit feeding the episode 58 eruptive vent down-rift from Pu`u `O`o in Kilauea's east rift zone. As output from the vent waned, Kilauea's summit magma storage and east rift zone transport system began to pressurize, as manifested by an increase in seismicity along the upper east rift zone, inflation of the summit and Pu`u `O`o, expansion of the east rift zone, and rising lava levels at both the summit and Pu`u `O`o. A dike began propagating towards the surface from beneath Makaopuhi Crater, 6 km west of Pu`u `O`o, at 1342 Hawaiian Standard Time (UTC - 10 hours) on 5 March. A fissure eruption started about 3.5 hours later near Nāpau Crater, 2 km uprift of Pu`u `O`o. Activity initially jumped between numerous en echelon fissure segments before centering on discrete vents near both ends of the 2.4-km-long fissure system for the final two days of the eruption. About 2.6 mcm of lava was erupted over the course of four days with a peak eruption rate of 11 m3/s. The petrologic characteristics of the fissure-fed lava indicate mixing between hotter mantle-derived magma and cooler rift-stored magma, with a greater proportion of the cooler component than was present in east rift zone lava erupting before March 2011. The fissure eruption was accompanied by the highest SO2 emission rates since 1986. Coincidentally, the summit and Pu`u `O`o deflated as magma drained away, causing expansion of the ERZ. The geological, geophysical, and geochemical datasets collected before, during, and after the Kamoamoa eruption provide an unprecedented account of what, at least in recent decades, is the 'normal' mode for hawaiian fountaining at Kilauea--that is, low intensity fissure-fed eruptions. This activity differs from high fountaining in that there is little physical coupling between melt and magmatic gas--for much of the Kamoamoa eruption lava ponded sluggishly over the vents and was weakly disrupted by bursts from trains of very closely spaced gas bubbles. Such eruptions enable us to examine the middle ground between strombolian and classical hawaiian behaviors at basaltic volcanoes.

Influence des traitements thermiques et de la microstructure sur les phénomènes de découplage dans les composés au bismuth

NASA Astrophysics Data System (ADS)

Nicolas, M.; Guyen van Huong, C. N.; Burger, J. P.; Dubon, A.; Fitoussi, J. P.; Laval, J. Y.

1991-11-01

a.c. susceptibility measurements and 3D electronic microscopy observation were carried out on three Bi-compounds (2212 and 2223). Depending on the annealing conditions, one observes lamellar-type materials organized either in a more or less dense structure of fine particles or in very large slabs. The a.c. susceptibility signals allow to separate the intergranular from the intragranular effects. The combined results obtained by both techniques lead us to conclude that the intergranular and the intragranular decoupling, induced by magnetic fields are of same nature, i.e. occur at the (BiO)2 slab. Nous avons couplé des mesures de susceptibilité altemative et d'observation au microscope électronique en 3D sur trois échantillons supraconducteurs au bismuth (2212 et 2223). Selon les conditions de recuit, on observe des matériaux de type lamellaire, organisés soit en une structure plus ou moins dense de fines particules, soit en larges plaquettes. L'étude des signaux de susceptibilité alternative χ' et χ'' permet de séparer les effets intergranulaires des effets intragranulaires. les résultats combinés des deux techniques nous ont conduit à conclure que les deux types de découplage (inter et intragranulaires), induits par les champs magnétiques sont de même nature, c'est-à-dire se produisent au niveau des bicouches (BiO)2.

Application du concept de maillon faible à un critère d'endurance multiaxial

NASA Astrophysics Data System (ADS)

Flacelière, L.; Morel, F.; Palin-Luc, T.

2002-12-01

En fatigue à grand nombre de cycle, il est aujourd'hui admis que la distribution des contraintes, ainsi que la taille des composants, sont responsables de variations de la limite de fatigue. Sous chargement uniaxial ou multiaxial, on peut montrer qu'une approche statistique dite du maillon le plus faible, combiné à un critère multiaxial d'endurance basé sur une analyse micro plastique, permet de prédire la limite de fatigue de plusieurs matériaux métalliques. Quatre types de chargement sont analysés (traction-compression, torsion, flexion rotative et flexion plane), puis comparées aux résultats expérimentaux, pour une fonte et deux aciers haute résistance. L'approche statistique proposée permet d'intégrer un certain nombre d'aspects: la dispersion des données pour tous types de chargement, l'effet de gradient et l'influence de la présence de défauts matériaux. Enfin, ce modèle rend également compte de la diminution de la limite de fatigue avec l'augmentation du volume contraint. Les prédictions des probabilités de rupture sont raisonnables bien que seules des limites de fatigue relatives à des probabilités de rupture de 50% soient utilisées pour l'identification des paramètres du modèle.

Transposable Element Genomic Fissuring in Pyrenophora teres Is Associated With Genome Expansion and Dynamics of Host–Pathogen Genetic Interactions

PubMed Central

Syme, Robert A.; Martin, Anke; Wyatt, Nathan A.; Lawrence, Julie A.; Muria-Gonzalez, Mariano J.; Friesen, Timothy L.; Ellwood, Simon R.

2018-01-01

Pyrenophora teres, P. teres f. teres (PTT) and P. teres f. maculata (PTM) cause significant diseases in barley, but little is known about the large-scale genomic differences that may distinguish the two forms. Comprehensive genome assemblies were constructed from long DNA reads, optical and genetic maps. As repeat masking in fungal genomes influences the final gene annotations, an accurate and reproducible pipeline was developed to ensure comparability between isolates. The genomes of the two forms are highly collinear, each composed of 12 chromosomes. Genome evolution in P. teres is characterized by genome fissuring through the insertion and expansion of transposable elements (TEs), a process that isolates blocks of genic sequence. The phenomenon is particularly pronounced in PTT, which has a larger, more repetitive genome than PTM and more recent transposon activity measured by the frequency and size of genome fissures. PTT has a longer cultivated host association and, notably, a greater range of host–pathogen genetic interactions compared to other Pyrenophora spp., a property which associates better with genome size than pathogen lifestyle. The two forms possess similar complements of TE families with Tc1/Mariner and LINE-like Tad-1 elements more abundant in PTT. Tad-1 was only detectable as vestigial fragments in PTM and, within the forms, differences in genome sizes and the presence and absence of several TE families indicated recent lineage invasions. Gene differences between P. teres forms are mainly associated with gene-sparse regions near or within TE-rich regions, with many genes possessing characteristics of fungal effectors. Instances of gene interruption by transposons resulting in pseudogenization were detected in PTT. In addition, both forms have a large complement of secondary metabolite gene clusters indicating significant capacity to produce an array of different molecules. This study provides genomic resources for functional genetics to help dissect factors underlying the host–pathogen interactions. PMID:29720997

Mechanisms, Monitoring and Modeling Earth Fissure generation and Fault activation due to subsurface Fluid exploitation (M3EF3): A UNESCO-IGCP project in partnership with the UNESCO-IHP Working Group on Land Subsidence

NASA Astrophysics Data System (ADS)

Teatini, P.; Carreon-Freyre, D.; Galloway, D. L.; Ye, S.

2015-12-01

Land subsidence due to groundwater extraction was recently mentioned as one of the most urgent threats to sustainable development in the latest UNESCO IHP-VIII (2014-2020) strategic plan. Although advances have been made in understanding, monitoring, and predicting subsidence, the influence of differential vertical compaction, horizontal displacements, and hydrostratigraphic and structural features in groundwater systems on localized near-surface ground ruptures is still poorly understood. The nature of ground failure may range from fissuring, i.e., formation of an open crack, to faulting, i.e., differential offset of the opposite sides of the failure plane. Ground ruptures associated with differential subsidence have been reported from many alluvial basins in semiarid and arid regions, e.g. China, India, Iran, Mexico, Saudi Arabia, Spain, and the United States. These ground ruptures strongly impact urban, industrial, and agricultural infrastructures, and affect socio-economic and cultural development. Leveraging previous collaborations, this year the UNESCO Working Group on Land Subsidence began the scientific cooperative project M3EF3 in collaboration with the UNESCO International Geosciences Programme (IGCP n.641; www.igcp641.org) to improve understanding of the processes involved in ground rupturing associated with the exploitation of subsurface fluids, and to facilitate the transfer of knowledge regarding sustainable groundwater management practices in vulnerable aquifer systems. The project is developing effective tools to help manage geologic risks associated with these types of hazards, and formulating recommendations pertaining to the sustainable use of subsurface fluid resources for urban and agricultural development in susceptible areas. The partnership between the UNESCO IHP and IGCP is ensuring that multiple scientific competencies required to optimally investigate earth fissuring and faulting caused by groundwater withdrawals are being employed.

Anorectal pain and irritation: anal fissure, levator syndrome, proctalgia fugax, and pruritus ani.

PubMed

Vincent, C

1999-03-01

Anal fissures, proctalgia fugax, levator ani syndrome, and pruritus ani are common causes of anorectal pain and irritation. The clinician who obtains a thorough history and performs a complete examination can accurately diagnose these disorders. Ancillary tests seldom are helpful and rarely are necessary. Most patients suffering from these conditions readily respond to conservative therapy provided in the primary care practitioner's office.

Volcanic Eruptions of the EPR and Ridge Axis Segmentation: An Interdisciplinary View

NASA Astrophysics Data System (ADS)

White, S.; Soule, S. A.; Tolstoy, M.; Waldhauser, F.; Rubin, K.

2008-12-01

The eruption of the EPR in 2005-06 provides an ideal window into the relationship between fine-scale segmentation of the ridge axis and individual eruptive episodes. Lava flow mapping of the eruption by visual and acoustic images, precise dates on multiple eruptive units, stress information from seismicity, long-term records of hydrothermal activity, and well known segment boundaries illustrate the relationships between eruptions and segmentation of mid-ocean ridges. Lava flows emerged from several sections of the axial summit trough (AST) during the eruption, presumably from en echelon fissures between 9 45'N and 9 57'N. Each en echelon fissure is a 4th order segment, and the overall area matches the 3rd Order segment between ~9 45'N and ~9 58'N. Within the eruption, the primary eruptive fissure jumped east by 600 m at 9 53'N, and ran along an inward facing fault scarp, although limited lava effusion also extended northward along the axial fissure. A zone of high seismicity connects the normal fault bounding the eastern fissure eruption with the main locus of eruption on the ridge axis to the south, suggesting that the offset eruption may have occurred in response to stress buildup on this fault. Radiometric ages indicate that the entire along-axis extent of the eruptive fissures activated initially, but that volcanic activity focused to a single fourth-order segment within 1-3 months. Previously indentified breaks in the AST and its overall outline were largely unchanged by the eruption. These observations support the hypothesis that fourth-order segments are offsets controlled by the mechanics of dike emplacement, whereas third-order segments represent discrete volcanic systems. Dike segmentation may be controlled by variations in underlying ridge structure or the magma reservoir. Hydrothermal systems disrupted as far south as 9 37'N may be responding to cracking due to stress interaction or share a common deeper magmatic source. Comparisons between the 1991 EPR eruption at the same site, and several mapped southern EPR eruptions, the 10 45'N EPR eruption in ca. 2003 all show similar relationships to segmentation

Description of sorbing tracers transport in fractured media using the lattice model approach

NASA Astrophysics Data System (ADS)

Jiménez-Hornero, Francisco J.; Giráldez, Juan V.; Laguna, Ana

2005-12-01

The transport of contaminants in fractured media is a complex phenomenon with a great environmental impact. It has been described with several models, most of them based on complex partial differential equations, that are difficult to apply when equilibrium and nonequilibrium dynamics are considered in complex boundaries. With the aim of overcoming this limitation, a combination of two lattice Bathnagar, Gross and Krook (BGK) models, derived from the lattice Boltzmann model, is proposed in this paper. The fractured medium is assumed to be a single fissure in a porous rock matrix. The proposed approach permits us to deal with two processes with different length scales: advection-dispersion in the fissure and diffusion within the rock matrix. In addition to the mentioned phenomena, sorption reactions are also considered. The combined model has been tested using the experimental breakthrough curves obtained by Garnier et al. (Garnier, J.M., Crampon, N., Préaux, C., Porel, G., Vreulx, M., 1985. Traçage par 13C, 2H, I - et uranine dans la nappe de la craie sénonienne en écoulement radial convergent (Béthune, France). J. Hidrol. 78, 379-392.) giving acceptable results. A study on the influence of the lattice BGK models parameters controlling sorption and matrix diffusion on the breakthrough curves shape is included.

Stress and psychopathology and its impact on quality of life in chronic anal fissure (CAF) patients.

PubMed

Arısoy, Özden; Şengül, Neriman; Çakir, Affan

2017-06-01

Chronic anal fissure (CAF) onset, exacerbation, and impact on quality of life are influenced by a host of psychological, physiological, and social factors. We aimed to investigate the difference in psychopathology and stress between normal and CAF groups. Thirty CAF patients and 20 age-sex matched healthy controls were evaluated for Axis I psychopathology, depression, anxiety, and stress with Hamilton and Hospital Depression-Anxiety Scales, Perceived Stress Scale, and SF-36. With a mean age of 39.47, 83.3% of CAF patients were female. Anxiety-depression and stress scores were all significantly higher and functionality was lower in the CAF group compared to controls (p < 0.001); 36.7% of the patients had a triggering stress factor and 56.6% had an exacerbating stress factor; 56.7% of the patients had an ongoing Axis I psychopathology while 50% had a previous psychopathology. Pain (96.7% had pain (VAS = 6.55)) and bleeding (83.3% had bleeding (VAS = 4.14)) severity showed a negative impact on bodily pain and role limitations emotional subscales of SF36. There is a high comorbidity of psychopathology in the CAF patients and depression and anxiety severities show a negative impact on the quality of life. Stress acts as both a triggering and an exacerbating factor in CAF.

Leadership and Innovation-Listening to and Learning From Young People in Burundi.

PubMed

Nininahazwe, Cédric; Alesi, Jacquelyne; Caswell, Georgina; Lumumba, Musah; Mellin, Julie; Ndayizeye, Nicholas-Monalisa; Orza, Luisa; Rahimi, Michaela; Westerhof, Nienke

2017-02-01

This commentary describes young people's leadership from the perspective of a youth-led organization in the Link Up project in Burundi, Réseau National des Jeunes vivant avec le VIH. It describes processes that enable young people to guide, influence, deliver, and improve health service provision; the challenges faced by Réseau National des Jeunes vivant avec le VIH and how they are addressing these challenges. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Evaluation of different types of enamel conditioning before application of a fissure sealant.

PubMed

Ciucchi, Philip; Neuhaus, Klaus W; Emerich, Marta; Peutzfeldt, Anne; Lussi, Adrian

2015-01-01

The aim of the study was to compare fissure sealant quality after mechanical conditioning of erbium-doped yttrium aluminium garnet (Er:YAG) laser or air abrasion prior to chemical conditioning of phosphoric acid etching or of a self-etch adhesive. Twenty-five permanent molars were initially divided into three groups: control group (n = 5), phosphoric acid etching; test group 1 (n = 10), air abrasion; and test group 2, (n = 10) Er:YAG laser. After mechanical conditioning, the test group teeth were sectioned buccolingually and the occlusal surface of one half tooth (equal to one sample) was acid etched, while a self-etch adhesive was applied on the other half. The fissure system of each sample was sealed, thermo-cycled and immersed in 5% methylene dye for 24 h. Each sample was sectioned buccolingually, and one slice was analysed microscopically. Using specialized software microleakage, unfilled margin, sealant failure and unfilled area proportions were calculated. A nonparametric ANOVA model was applied to compare the Er:YAG treatment with that of air abrasion and the self-etch adhesive with phosphoric acid (α = 0.05). Test groups were compared to the control group using Wilcoxon rank sum tests (α = 0.05). The control group displayed significantly lower microleakage but higher unfilled area proportions than the Er:YAG laser + self-etch adhesive group and displayed significantly higher unfilled margin and unfilled area proportions than the air-abrasion + self-etch adhesive group. There was no statistically significant difference in the quality of sealants applied in fissures treated with either Er:YAG laser or air abrasion prior to phosphoric acid etching, nor in the quality of sealants applied in fissures treated with either self-etch adhesive or phosphoric acid following Er:YAG or air-abrasion treatment.

Tongue prints in biometric authentication: A pilot study

PubMed Central

Jeddy, Nadeem; Radhika, T; Nithya, S

2017-01-01

Background and Objectives: Biometric authentication is an important process for the identification and verification of individuals for security purposes. There are many biometric systems that are currently in use and also being researched. Tongue print is a new biometric authentication tool that is unique and cannot be easily forged because no two tongue prints are similar. The present study aims to evaluate the common morphological features of the tongue and its variations in males and females. The usefulness of alginate impression and dental cast in obtaining the lingual impression was also evaluated. Materials and Methods: The study sample included twenty participants. The participants were subjected to visual examination following which digital photographs of the dorsal surface of the tongue were taken. Alginate impressions of the tongue were made, and casts were prepared using dental stone. The photographs and the casts were analyzed by two observers separately for the surface morphology including shape, presence or absence of fissures and its pattern of distribution. Three reference points were considered to determine the shape of the tongue. Results: The most common morphological feature on the dorsum of the tongue was the presence of central fissures. Multiple vertical fissures were observed in males whereas single vertical fissure was a common finding in females. The fissures were predominantly shallow in males and deep in females. The tongue was predominantly U shaped in males and females. V-shaped tongue was observed in 25% of females. Conclusion: Tongue prints are useful in biometric authentication. The methodology used in the study is simple, easy and can be adopted by dentists on a regular basis. However, large-scale studies are required to validate the results and also identify other features of the tongue that can be used in forensics and biometric authentication process. PMID:28479712

Tongue prints in biometric authentication: A pilot study.

PubMed

Jeddy, Nadeem; Radhika, T; Nithya, S

2017-01-01

Biometric authentication is an important process for the identification and verification of individuals for security purposes. There are many biometric systems that are currently in use and also being researched. Tongue print is a new biometric authentication tool that is unique and cannot be easily forged because no two tongue prints are similar. The present study aims to evaluate the common morphological features of the tongue and its variations in males and females. The usefulness of alginate impression and dental cast in obtaining the lingual impression was also evaluated. The study sample included twenty participants. The participants were subjected to visual examination following which digital photographs of the dorsal surface of the tongue were taken. Alginate impressions of the tongue were made, and casts were prepared using dental stone. The photographs and the casts were analyzed by two observers separately for the surface morphology including shape, presence or absence of fissures and its pattern of distribution. Three reference points were considered to determine the shape of the tongue. The most common morphological feature on the dorsum of the tongue was the presence of central fissures. Multiple vertical fissures were observed in males whereas single vertical fissure was a common finding in females. The fissures were predominantly shallow in males and deep in females. The tongue was predominantly U shaped in males and females. V-shaped tongue was observed in 25% of females. Tongue prints are useful in biometric authentication. The methodology used in the study is simple, easy and can be adopted by dentists on a regular basis. However, large-scale studies are required to validate the results and also identify other features of the tongue that can be used in forensics and biometric authentication process.

Randomized clinical trial assessing the side-effects of glyceryl trinitrate and diltiazem hydrochloride in the treatment of chronic anal fissure.

PubMed

Kocher, H M; Steward, M; Leather, A J M; Cullen, P T

2002-04-01

Glyceryl trinitrate (GTN) ointment (0 small middle dot2 per cent) has an efficacy of up to 68 per cent in healing chronic anal fissure, but with headache as a major side-effect. Diltiazem hydrochloride (DTZ) cream (2 per cent) is expected to have fewer side-effects. A prospective double-blind randomized two-centre trial requiring at least 26 patients in each group (alpha = 0.05, beta = 0.9) was instituted after approval of the local ethics committee, to compare the incidence of side-effects (primary endpoint) with 0.2 per cent GTN ointment and 2 per cent DTZ cream in the treatment of chronic anal fissure. Treatments were applied perianally, twice daily for 6-8 weeks. All patients gave written informed consent. Both groups were comparable in patient demographics and clinical characteristics. Twelve patients violated the protocol, withdrew or did not attend follow-up. There were more side-effects with GTN (21 of 29 patients) than with DTZ (13 of 31) (relative risk (RR) 1.84 (95 per cent confidence interval (c.i.) 1.11 to 3.04), P = 0.01). In particular, more headaches occurred with GTN (17 of 29 patients) than with DTZ (eight of 31) (RR 2.06 (95 per cent c.i. 1.18 to 3.59), P = 0.01). There were no significant differences in healing and symptomatic improvement rates between patients receiving GTN (25 of 29) and DTZ (24 of 31). DTZ cream caused substantially fewer headaches than GTN ointment. There was no significant difference in the healing or improvement of chronic anal fissure between the treatments. DTZ may be the preferred first-line treatment for chronic anal fissure.

Real & Simulated IFU Observations of Low-Mass Early-Type Galaxies: Environmental Influence Probed for Cluster Galaxies

NASA Astrophysics Data System (ADS)

Sybilska, Agnieszka; Łokas, Ewa Luiza; Fouquet, Sylvain

2017-03-01

We combine high-quality IFU data with a new set of numerical simulations to study low-mass early type galaxies (dEs) in dense environments. Our earlier study of dEs in the Virgo cluster has produced the first large-scale maps of kinematic and stellar population properties of dEs in those environments (Ryś et al. 2013, 2014, 2015). A quantitative discrimination between various (trans)formation processes proposed for these objects is, however, a complex issue, requiring a priori assumptions about the progenitors of galaxies we observe and study today. To bridge this gap between observations and theoretical predictions, we use the expertise gained in the IFU data analysis to look ``through the eye of SAURON'' at our new suite of high-resolution N-body simulations of dEs in the Virgo cluster. Mimicking the observers perspective as closely as possible, we can also indicate the existing instrumental and viewer limitations regarding what we are/are not able to detect as observers.

Methodes de calcul des forces aerodynamiques pour les etudes des interactions aeroservoelastiques

NASA Astrophysics Data System (ADS)

Biskri, Djallel Eddine

L'aeroservoelasticite est un domaine ou interagissent la structure flexible d'un avion, l'aerodynamique et la commande de vol. De son cote, la commande du vol considere l'avion comme une structure rigide et etudie l'influence du systeme de commande sur la dynamique de vol. Dans cette these, nous avons code trois nouvelles methodes d'approximation de forces aerodynamiques: Moindres carres corriges, Etat minimal corrige et Etats combines. Dans les deux premieres methodes, les erreurs d'approximation entre les forces aerodynamiques approximees par les methodes classiques et celles obtenues par les nouvelles methodes ont les memes formes analytiques que celles des forces aerodynamiques calculees par LS ou MS. Quant a la troisieme methode, celle-ci combine les formulations des forces approximees avec les methodes standards LS et MS. Les vitesses et frequences de battement et les temps d'executions calcules par les nouvelles methodes versus ceux calcules par les methodes classiques ont ete analyses.

Liquid-phase exfoliated graphene as highly-sensitive sensor for simultaneous determination of endocrine disruptors: diethylstilbestrol and estradiol.

PubMed

Hu, Lintong; Cheng, Qin; Chen, Danchao; Ma, Ming; Wu, Kangbing

2015-01-01

It is quite important to develop convenient and rapid analytical methods for trace levels of endocrine disruptors because they heavily affect health and reproduction of humans and animals. Herein, graphene was easily prepared via one-step exfoliation using N-methyl-2-pyrrolidone as solvent, and then used to construct an electrochemical sensor for highly-sensitive detection of diethylstilbestrol (DES) and estradiol (E2). On the surface of prepared graphene film, two independent and greatly-increased oxidation waves were observed at 0.28V and 0.49V for DES and E2. The remarkable signal enlargements indicated that the detection sensitivity was improved significantly. The influences of pH value, amount of graphene and accumulation time on the oxidation signals of DES and E2 were discussed. As a result, a highly-sensitive and rapid electrochemical method was newly developed for simultaneous detection of DES and E2. The values of detection limit were evaluated to be 10.87 nM and 4.9 nM for DES and E2. Additionally, this new method was successfully used in lake water samples and the accuracy was satisfactory. Copyright © 2014 Elsevier B.V. All rights reserved.

Le monde des tout petits est-il influence par notre monde moderne? (Is the World of Children influenced by our Modern World?)

ERIC Educational Resources Information Center

Duparc, Germaine

1971-01-01

Although the modern child is up to the minute" in his language, interests, and memory for technological details, in many essential respects his vision has remained unchanged from that of children of previous generations. (Editor)

Révision systématique des effets de la fréquence des repas en famille sur les résultats psychosociaux chez les jeunes

PubMed Central

Harrison, Megan E.; Norris, Mark L.; Obeid, Nicole; Fu, Maeghan; Weinstangel, Hannah; Sampson, Margaret

2015-01-01

Résumé Objectif Effectuer une révision systématique des effets de repas en famille fréquents sur les résultats psychosociaux chez les enfants et les adolescents et examiner s’il existe des différences dans les résultats selon le sexe. Sources des données Des études ont été cernées à la suite d’une recherche dans MEDLINE (de 1948 à la dernière semaine de juin 2011) et dans PsycINFO (de 1806 à la première semaine de juillet 2011) à l’aide de l’interface Ovide. Les expressions et mots clés MeSH utilisés seuls ou en combinaisons étaient les suivants : family, meal, food intake, nutrition, diets, body weight, adolescent attitudes, eating behaviour, feeding behaviour et eating disorders. Les bibliographies des articles jugés pertinents ont aussi été passées en revus. Sélection des études La recherche initiale a produit 1783 articles. Pour être incluses dans l’analyse, les études devaient répondre aux critères suivants : être publiées en anglais dans une revue révisée par des pairs; porter sur des enfants ou des adolescents; traiter de l’influence des repas en famille sur les paramètres psychosociaux (p. ex. consommation de drogues et autres substances, troubles de l’alimentation, dépression) chez les enfants ou les adolescents; avoir une conception d’étude appropriée, notamment des méthodes statistiques acceptables pour l’analyse des paramètres. Quatorze articles satisfaisaient aux critères d’inclusion. Deux examinateurs indépendants ont étudié et analysé les articles. Synthèse Dans l’ensemble, les résultats font valoir que la fréquence des repas en famille est inversement proportionnelle aux troubles de l’alimentation, à la consommation d’alcool et de drogues, aux comportements violents, aux sentiments de dépression ou aux pensées suicidaires chez les adolescents. Il existe une relation positive entre de fréquents repas en famille, une bonne estime de soi et la réussite scolaire. Les études révèlent des différences considérables dans les résultats chez les enfants et adolescents masculins et féminins, les sujets féminins ayant des résultats plus positifs. Conclusion Cette révision systématique vient confirmer davantage qu’il convient de préconiser de fréquents repas en famille. Tous les professionnels de la santé devraient renseigner les familles concernant les bienfaits de prendre régulièrement ensemble des repas.

Apport maternel chez la balane tropicale : Plasticite de l'allocation de la ressource trophique pour la production larvaire en conditions de limitation nutritionnelle et de stress environnemental

NASA Astrophysics Data System (ADS)

Freuchet, Florian

Dans le milieu marin, l'abondance du recrutement depend des processus qui vont affecter les adultes et le stock de larves. Sous l'influence de signaux fiables de la qualite de l'habitat, la mere peut augmenter (effet maternel anticipatoire, 'anticipatory mother effects', AME) ou reduire (effet maternel egoiste, 'selfish maternai effects', SME) la condition physiologique de la progeniture. Dans les zones tropicales, generalement plus oligotrophes, la ressource nutritive et la temperature sont deux composantes importantes pouvant limiter le recrutement. Les effets de l'apport nutritionnel et du stress thermique sur la production de larves et sur la stategie maternelle adoptee ont ete testes dans cette etude. Nous avons cible la balane Chthamalus bisinuatus (Pilsbry) comme modele biologique car el1e domine les zones intertidales superieures le long des cotes rocheuses du Sud-Est du Bresil (region tropicale). Les hypotheses de depart stipulaient que l'apport nutritionnel permet aux adultes de produire des larves de qualite elevee et que le stress thermique genere une ponte precoce, produisant des larves de faible qualite. Afin de tester ces hypotheses, des populations de C. bisinuatus ont ete elevees selon quatre groupes experimentaux differents, en combinant des niveaux d'apport nutritionnel (eleve et faible) et de stress thermique (stresse et non stresse). Des mesures de survie et de conditions physiologiques des adultes et des larves ont permis d'identifier les reponses parentales pouvant etre avantageuses dans un environnement tropical hostile. L'analyse des profils en acides gras a ete la methode utilisee pour evaluer la qualite physiologique des adultes et de larves. Les resultats du traitement alimentaire (fort ou faible apport nutritif), ne montrent aucune difference dans l'accumulation de lipides neutres, la taille des nauplii, l'effort de reproduction ou le temps de survie des nauplii en condition de jeune. Il semble que la faible ressource nutritive est compensee par les meres qui adoptent un modele AME qui se traduit par l'anticipation du milieu par les meres afin de produire des larves au phenotype approprie. A l'ajout d'un stress thermique, on observe des diminutions de 47% de la production de larves et celles-ci etaient 18 microm plus petites. Les meres semblent utiliser un modele SME caracterise par une diminution de la performance des larves. Suite a ces resultats, nous emettons l'hypothese qu'en zone subtropicale, comme sur les cotes de l'etat de Sao Paulo, l'elevation de la temperature subie par les balanes n'est, a priori, pas dommageable pour leur organisme si eIle est combinee a un apport nutritif suffisant.

Pharmacogénétique: qu'en est-il au Maroc?

PubMed Central

Idrissi, Meryem Janati; Ouldim, Karim; Amarti, Afaf; El Hassouni, Mohamed; Khabbal, Youssef

2013-01-01

La pharmacogénétique est l’étude de l'influence des variations génétiques interindividuelles sur la réponse aux médicaments, avec le but d'améliorer la prise en charge des patients en visant une médecine personnalisée. Au fait le génome de deux personnes ne diffère que par 0.1% des 3.2 milliards de paires de bases, ce qui implique les effets indésirables des médicaments, qui ont un très important impact sur le plan clinique que sur le plan économique. Or cette dernière décennie ces effets indésirables ont pu être évités grâce aux tests pharmacogénétiques. Au Maroc, la recherche en pharmacogénétique commence à susciter l'intérêt des chercheurs avec quelques études. Une toute première étude en 1986, sur l'acétylation de l'isoniazide chez la population marocaine, suivie par deux autres en 2011 se focalisant sur le métabolisme du tacrolimus et des anti-vitamines K. Ainsi l'espoir maintenant est d'identifier les majoritaires polymorphismes génétiques affectant les patients marocains, afin de leur fournir une prise en charge adaptée. PMID:23785548

Instrumental Response Model and Detrending for the Dark Energy Camera

DOE PAGES

Bernstein, G. M.; Abbott, T. M. C.; Desai, S.; ...

2017-09-14

We describe the model for mapping from sky brightness to the digital output of the Dark Energy Camera (DECam) and the algorithms adopted by the Dark Energy Survey (DES) for inverting this model to obtain photometric measures of celestial objects from the raw camera output. This calibration aims for fluxes that are uniform across the camera field of view and across the full angular and temporal span of the DES observations, approaching the accuracy limits set by shot noise for the full dynamic range of DES observations. The DES pipeline incorporates several substantive advances over standard detrending techniques, including principal-components-based sky and fringe subtraction; correction of the "brighter-fatter" nonlinearity; use of internal consistency in on-sky observations to disentangle the influences of quantum efficiency, pixel-size variations, and scattered light in the dome flats; and pixel-by-pixel characterization of instrument spectral response, through combination of internal-consistency constraints with auxiliary calibration data. This article provides conceptual derivations of the detrending/calibration steps, and the procedures for obtaining the necessary calibration data. Other publications will describe the implementation of these concepts for the DES operational pipeline, the detailed methods, and the validation that the techniques can bring DECam photometry and astrometry withinmore » $$\\approx 2$$ mmag and $$\\approx 3$$ mas, respectively, of fundamental atmospheric and statistical limits. In conclusion, the DES techniques should be broadly applicable to wide-field imagers.« less

Instrumental Response Model and Detrending for the Dark Energy Camera

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernstein, G. M.; Abbott, T. M. C.; Desai, S.

We describe the model for mapping from sky brightness to the digital output of the Dark Energy Camera (DECam) and the algorithms adopted by the Dark Energy Survey (DES) for inverting this model to obtain photometric measures of celestial objects from the raw camera output. This calibration aims for fluxes that are uniform across the camera field of view and across the full angular and temporal span of the DES observations, approaching the accuracy limits set by shot noise for the full dynamic range of DES observations. The DES pipeline incorporates several substantive advances over standard detrending techniques, including principal-components-based sky and fringe subtraction; correction of the "brighter-fatter" nonlinearity; use of internal consistency in on-sky observations to disentangle the influences of quantum efficiency, pixel-size variations, and scattered light in the dome flats; and pixel-by-pixel characterization of instrument spectral response, through combination of internal-consistency constraints with auxiliary calibration data. This article provides conceptual derivations of the detrending/calibration steps, and the procedures for obtaining the necessary calibration data. Other publications will describe the implementation of these concepts for the DES operational pipeline, the detailed methods, and the validation that the techniques can bring DECam photometry and astrometry withinmore » $$\\approx 2$$ mmag and $$\\approx 3$$ mas, respectively, of fundamental atmospheric and statistical limits. In conclusion, the DES techniques should be broadly applicable to wide-field imagers.« less

Modeling of reservoir compaction and surface subsidence at South Belridge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, K.S.; Chan, C.K.; Prats, M.

1995-08-01

Finite-element models of depletion-induced reservoir compaction and surface subsidence have been calibrated with observed subsidence, locations of surface fissures, and regions of subsurface casing damage at South Belridge and used predictively for the evaluation of alternative reservoir-development plans. Pressure maintenance through diatomite waterflooding appears to be a beneficial means of minimizing additional subsidence and fissuring as well as reducing axial-compressive-type casing damage.

The role of faulting on surface deformation patterns from pumping-induced groundwater flow (Las Vegas Valley, USA)

NASA Astrophysics Data System (ADS)

Hernandez-Marin, Martin; Burbey, Thomas J.

2009-12-01

Land subsidence and earth fissuring can cause damage in semiarid urbanized valleys where pumping exceeds natural recharge. In places such as Las Vegas Valley (USA), Quaternary faults play an important role in the surface deformation patterns by constraining the migration of land subsidence and creating complex relationships with surface fissures. These fissures typically result from horizontal displacements that occur in zones where extensional stress derived from groundwater flow exceeds the tensile strength of the near-surface sediments. A series of hypothetical numerical models, using the finite-element code ABAQUS and based on the observed conditions of the Eglington Fault zone, were developed. The models reproduced the (1) long-term natural recharge and discharge, (2) heavy pumping and (3) incorporation of artificial recharge that reflects the conditions of Las Vegas Valley. The simulated hydrostratigraphy consists of three aquifers, two aquitards and a relatively dry vadose zone, plus a normal fault zone that reflects the Quaternary Eglington fault. Numerical results suggest that a 100-m-wide fault zone composed of sand-like material produces: (1) conditions most similar to those observed in Las Vegas Valley and (2) the most favorable conditions for the development of fissures to form on the surface adjacent to the fault zone.

Caries-preventive effect of fissure sealant containing surface reaction-type pre-reacted glass ionomer filler and bonded by self-etching primer.

PubMed

Shimazu, Kisaki; Ogata, Kiyokazu; Karibe, Hiroyuki

2012-01-01

We aimed to evaluate the caries-preventive effect of a fissure sealant containing surface reaction-type pre-reacted glass ionomer (S-PRG) filler and bonded by self-etching primer versus those of 2 conventional resin-based sealants bonded by acid etching in terms of its impact on enamel demineralization and remineralization, enamel bond strength, and integrity of debonded enamel surfaces. Demineralization, remineralization, and bond strength on untreated enamel and enamel subsurface lesions of bovine incisors were assessed among the sealants by polarizing microscopy and microradiography; debonded enamel surfaces were examined by scanning electron microscopy. The conventional resin-based sealants bonded by acid etching caused surface defects on the enamel subsurface lesions and significantly increased the lesion depth (p = 0.014), indicative of enamel demineralization. However the S-PRG filler-containing sealant bonded by self-etching primer maintained the enamel surface integrity and inhibited enamel demineralization. No difference in bond strength on both untreated enamel and enamel subsurface lesions was noted among the sealants. An S-PRG filler-containing fissure sealant bonded by self-etching primer can prevent enamel demineralization, microleakage, and gaps without the tags created by acid etching regardless of the enamel condition. Such sealants are suitable for protecting the pits and fissures of immature permanent teeth.

Etude aerodynamique d'un jet turbulent impactant une paroi concave

NASA Astrophysics Data System (ADS)

LeBlanc, Benoit

Etant donne la demande croissante de temperatures elevees dans des chambres de combustion de systemes de propulsions en aerospatiale (turbomoteurs, moteur a reaction, etc.), l'interet dans le refroidissement par jets impactant s'est vu croitre. Le refroidissement des aubes de turbine permet une augmentation de temperature de combustion, ce qui se traduit en une augmentation de l'efficacite de combustion et donc une meilleure economie de carburant. Le transfert de chaleur dans les au bages est influence par les aspects aerodynamiques du refroidissement a jet, particulierement dans le cas d'ecoulements turbulents. Un manque de comprehension de l'aerodynamique a l'interieur de ces espaces confinees peut mener a des changements de transfert thermique qui sont inattendus, ce qui augmente le risque de fluage. Il est donc d'interet pour l'industrie aerospatiale et l'academie de poursuivre la recherche dans l'aerodynamique des jets turbulents impactant les parois courbes. Les jets impactant les surfaces courbes ont deja fait l'objet de nombreuses etudes. Par contre des conditions oscillatoires observees en laboratoire se sont averees difficiles a reproduire en numerique, puisque les structures d'ecoulements impactants des parois concaves sont fortement dependantes de la turbulence et des effets instationnaires. Une etude experimentale fut realisee a l'institut PPRIME a l'Universite de Poitiers afin d'observer le phenomene d'oscillation dans le jet. Une serie d'essais ont verifie les conditions d'ecoulement laminaires et turbulentes, toutefois le cout des essais experimentaux a seulement permis d'avoir un apercu du phenomene global. Une deuxieme serie d'essais fut realisee numeriquement a l'Universite de Moncton avec l'outil OpenFOAM pour des conditions d'ecoulement laminaire et bidimensionnel. Cette etude a donc comme but de poursuivre l'enquete de l'aerodynamique oscillatoire des jets impactant des parois courbes, mais pour un regime d'ecoulement transitoire, turbulent, tridimensionnel. Les nombres de Reynolds utilises dans l'etude numerique, bases sur le diametre du jet lineaire observe, sont de Red = 3333 et 6667, consideres comme etant en transition vers la turbulence. Dans cette etude, un montage numerique est construit. Le maillage, le schema numerique, les conditions frontiere et la discretisation sont discutes et choisis. Les resultats sont ensuite valides avec des donnees turbulentes experimentales. En modelisation numerique de turbulence, les modeles de Moyennage Reynolds des Equations Naviers Stokes (RANS) presentent des difficultes avec des ecoulements instationnaires en regime transitionnel. La Simulation des Grandes Echelles (LES) presente une solution plus precise, mais au cout encore hors de portee pour cette etude. La methode employee pour cette etude est la Simulation des Tourbillons Detaches (DES), qui est un hybride des deux methodes (RANS et LES). Pour analyser la topologie de l'ecoulement, la decomposition des modes propres (POD) a ete egalement ete effectuee sur les resultats numeriques. L'etude a demontre d'abord le temps de calcul relativement eleve associe a des essais DES pour garder le nombre de Courant faible. Les resultats numeriques ont cependant reussi a reproduire correctement le basculement asynchrone observe dans les essais experimentaux. Le basculement observe semble etre cause par des effets transitionnels, ce qui expliquerait la difficulte des modeles RANS a correctement reproduire l'aerodynamique de l'ecoulement. L'ecoulement du jet, a son tour, est pour la plupart du temps tridimensionnel et turbulent sauf pour de courtes periodes de temps stable et independant de la troisieme dimension. L'etude topologique de l'ecoulement a egalement permit la reconaissances de structures principales sousjacentes qui etaient brouillees par la turbulence. Mots cles : jet impactant, paroi concave, turbulence, transitionnel, simulation des tourbillons detaches (DES), OpenFOAM.

Ecoulement et mise en structure de suspensions macroscopiques

NASA Astrophysics Data System (ADS)

Petit, L.

In this review, we report the various experimental studies performed on suspensions of solid particules in liquids, and concerning the rheological behaviour of such systems and the ordering of particules under the applied velocity fields. The number of materials which are flowing suspensions (reagents in chemical engineering, paints while spreading, blood flow, muds in oil reservoir) gave rise to a number of experimental studies, especially in the last twenty years. The results show a wide variety of behaviour, even for systems of intermediate concentration. In addition, even for identical systems, the results depend of the type of flow. Then, it is clear that, in addition of the standard parameters which are to be taken into account, it is necessary to consider the type of flow the suspension is submitted to. The flow influences the spatial distribution of the particules, leading to their ordering or migration. These ordering or motions influence the flow, and then, the rheological behaviour of the whole system. So, there is a feedback mechanism from the ordering to the flow, which explains the experimental observations. Nous reportons dans cette revue les différentes études expérimentales réalisées sur les suspensions de particules solides dans un liquide et qui concernent le comportement rhéologique de ces systèmes ainsi que les mouvements des particules sous l'effet des champs de vitesse imposés. Ces mouvements peuvent conduire soit à des mises en structure, ou encore à des migrations des particules. L'importance du nombre de matériaux qui se présentent sous forme de suspension et qui sont mis en écoulement (réactif en génie chimique, peintures lors de leur mise en place, écoulement sanguin, boues dans les forages pétroliers,...) a motivé un grand nombre de travaux expérimentaux plus fondamentaux sur le sujet, particulièrement dans les vingt dernières années. Les résultats correspondants montrent une très grande diversité des comportements même pour les systèmes moyennement concentrés. Bien plus, pour des systèmes identiques, les résultats dépendent du type d'écoulement imposé. Ceci montre clairement, qu'à côté des facteurs standards qui sont à prendre en compte pour caractériser le comportement de tels systèmes (concentration de la phase solide, taille des particules, interactions entre particules, effets de diffusion,...), il est nécessaire de tenir compte de la nature de l'écoulement auquel est soumise la suspension. Cet écoulement modifie la distribution spatiale des particules, soit directement, soit par l'intermédiaire de différents mécanismes tels que écoulements secondaires, diffusion. Ces effets se traduisent par une mise en ordre des particules, ou bien à des mouvements de migration. Les structures ou les mouvements ainsi créés agissent à leur tour sur les propriétés de l'écoulement, et de là, sur le comportement rhéologique de l'ensemble du système. Il existe ainsi un mécanisme de rétroaction de la structure sur l'écoulement qui permet d'expliquer les comportements observés expérimentalement.

Contrôle cohérent de la dynamique de fragmentation d'agrégats alcalins

NASA Astrophysics Data System (ADS)

Lindinger, A.; Lupulescu, C.; Le Roux, J.; Bartelt, A.; Vajda, Š.; Wöste, L.

2004-11-01

Les agrégats métalliques présentent des propriétés extraordinaires, en particulier chimiques et catalytiques, qui dépendent fortement de leur taille. Ce comportement en fait des candidats idéaux pour l'analyse en temps réel de processus photo-induits ultrarapides, le but ultime étant la conduite de scénarios de contrôle cohérent. Nous avons réalisé des expériences d'ionisation multiphotonique non stationnaire sur de petits agrégats alcalins de différentes tailles et dans différents états électroniques rovibrationnels, y compris leur état fondamental, sondant ainsi leur dynamique ondulatoire, leur orientation structurelle, leur transfert de charge et leur dissociation. Les processus observés dépendent grandement des paramètres du faisceau laser d'excitation, tels que sa phase, son amplitude et sa durée ; cette sensibilité plaide pour l'emploi d'un système de contrôle rétroactif permettant de générer les formes d'impulsion optimales. Les caractéristiques spectrales et temporelles de ces dernières reflètent les propriétés du système étudié ainsi que les processus photochimiques que l'irradiation y induit. Nous présentons d'abord la dynamique vibrationelle d'états électroniques excités, liés, dissociatifs et prédissociatifs, des dimères et trimères alcalins. Suit une description du principe d'observation par pompage optique par effet Raman stimulé de la dynamique d'un paquet d'onde dans l'état électronique fondamental. Puisque les paramètres de l'impulsion d'excitation influencent de façon significative le poids des différentes trajectoires dans l'espace des phases, nous avons mené des expériences sur les canaux de fragmentation concurrents d'une réaction photo-induite, en étudiant les différents embranchements des voies d'ionisation et de fragmentation de Na{2}K excité électroniquement. L'utilisation d'un algorithme évolutif, pour l'optimisation de la phase et de l'amplitude de l'onde électromagnétique appliquée, permit d'influencer significativement la quantité résultante d'ions parents ou fragments. Des propriétés intéressantes sont déduites de la forme des impulsions laser optimales obtenues, qui révèlent la période de vibration moléculaire et qui, combinées aux courbes de potentiel, permettent de proposer les trajectoires que l'optimisation impose aux paquets d'onde. Pour finir, nous avons étudié comment une variété plus grande d'agrégats, en contribuant au canal de fragmentation NaK, influe sur la forme optimale d'impulsion. Là encore, la structure de cette dernière apporte des éclaircissements sur les canaux de fragmentation empruntés durant le processus de contrôle.

Anaplasic astrocytoma with exophytic growth in Sylvian fissure in a pediatric patient: a case report

PubMed Central

Bravo-Ángel, Ulises; Hernández-Reséndiz, Rodrigo Efraín; Vicuña-González, Rosa María; Frías-Guillén, Jessica; Bercholc-Urinowsky, Irina Jeanette; Bravo-Reyna, Carlos Cesar; García-González, Ulises

2018-01-01

Abstract Gliomas are the most frequent supratentorial intracranial tumors in the pediatric population. Usually, they are intra-axial lesions with a characteristic image pattern, however, there are few reported cases of gliomas with exophytic growth. There are no previous reports in the literature of gliomas with exophytic growth in the Sylvian fissure. Fourteen year-old female patient who started with seizures. In imaging studies, a neoplasic mass with an exophytic portion in the left Sylvian fissure was found. Macroscopically, total resection was performed, definitive diagnosis was anaplastic astrocytoma. She presented recurrence and is currently receiving adjuvant treatment. Supratentorial gliomas with exophytic growth are extremely rare. We report the first case in the pediatric population, and we consider it is important to know its imaging and macroscopic characteristics for its initial management and to take it into account as a differential diagnosis of exophytic lesions. PMID:29732137

Anaplasic astrocytoma with exophytic growth in Sylvian fissure in a pediatric patient: a case report.

PubMed

Guerra-Mora, José Raúl; Bravo-Ángel, Ulises; Hernández-Reséndiz, Rodrigo Efraín; Vicuña-González, Rosa María; Frías-Guillén, Jessica; Bercholc-Urinowsky, Irina Jeanette; Bravo-Reyna, Carlos Cesar; García-González, Ulises

2018-04-01

Gliomas are the most frequent supratentorial intracranial tumors in the pediatric population. Usually, they are intra-axial lesions with a characteristic image pattern, however, there are few reported cases of gliomas with exophytic growth. There are no previous reports in the literature of gliomas with exophytic growth in the Sylvian fissure. Fourteen year-old female patient who started with seizures. In imaging studies, a neoplasic mass with an exophytic portion in the left Sylvian fissure was found. Macroscopically, total resection was performed, definitive diagnosis was anaplastic astrocytoma. She presented recurrence and is currently receiving adjuvant treatment. Supratentorial gliomas with exophytic growth are extremely rare. We report the first case in the pediatric population, and we consider it is important to know its imaging and macroscopic characteristics for its initial management and to take it into account as a differential diagnosis of exophytic lesions.

Flows of Newtonian and Power-Law Fluids in Symmetrically Corrugated Cappilary Fissures and Tubes

NASA Astrophysics Data System (ADS)

Walicka, A.

2018-02-01

In this paper, an analytical method for deriving the relationships between the pressure drop and the volumetric flow rate in laminar flow regimes of Newtonian and power-law fluids through symmetrically corrugated capillary fissures and tubes is presented. This method, which is general with regard to fluid and capillary shape, can also be used as a foundation for different fluids, fissures and tubes. It can also be a good base for numerical integration when analytical expressions are hard to obtain due to mathematical complexities. Five converging-diverging or diverging-converging geometrics, viz. wedge and cone, parabolic, hyperbolic, hyperbolic cosine and cosine curve, are used as examples to illustrate the application of this method. For the wedge and cone geometry the present results for the power-law fluid were compared with the results obtained by another method; this comparison indicates a good compatibility between both the results.

Lung lobe modeling and segmentation with individualized surface meshes

NASA Astrophysics Data System (ADS)

Blaffert, Thomas; Barschdorf, Hans; von Berg, Jens; Dries, Sebastian; Franz, Astrid; Klinder, Tobias; Lorenz, Cristian; Renisch, Steffen; Wiemker, Rafael

2008-03-01

An automated segmentation of lung lobes in thoracic CT images is of interest for various diagnostic purposes like the quantification of emphysema or the localization of tumors within the lung. Although the separating lung fissures are visible in modern multi-slice CT-scanners, their contrast in the CT-image often does not separate the lobes completely. This makes it impossible to build a reliable segmentation algorithm without additional information. Our approach uses general anatomical knowledge represented in a geometrical mesh model to construct a robust lobe segmentation, which even gives reasonable estimates of lobe volumes if fissures are not visible at all. The paper describes the generation of the lung model mesh including lobes by an average volume model, its adaptation to individual patient data using a special fissure feature image, and a performance evaluation over a test data set showing an average segmentation accuracy of 1 to 3 mm.

Simulation of the Flow Through Porous Layers Composed of Converging-Diverging Capillary Fissures or Tubes

NASA Astrophysics Data System (ADS)

Walicka, A.

2018-02-01

In this paper, a porous medium is modelled by a network of converging-diverging capillaries which may be considered as fissures or tubes. This model makes it necessary to consider flows through capillary fissures or tubes. Therefore an analytical method for deriving the relationships between pressure drops, volumetric flow rates and velocities for the following fluids: Newtonian, polar, power-law, pseudoplastic (DeHaven and Sisko types) and Shulmanian, was developed. Next, considerations on the models of pore network for Newtonian and non-Newtonian fluids were presented. The models, similar to the schemes of central finite differences may provide a good basis for transforming the governing equations of a flow through the porous medium into a set of linear or quasi-linear algebraic equations. It was shown that the some coefficients in these algebraic equations depend on the kind of the capillary convergence.

Microbial populations in contaminant plumes

NASA Astrophysics Data System (ADS)

Haack, Sheridan K.; Bekins, Barbara A.

Efficient biodegradation of subsurface contaminants requires two elements: (1) microbial populations with the necessary degradative capabilities, and (2) favorable subsurface geochemical and hydrological conditions. Practical constraints on experimental design and interpretation in both the hydrogeological and microbiological sciences have resulted in limited knowledge of the interaction between hydrogeological and microbiological features of subsurface environments. These practical constraints include: (1) inconsistencies between the scales of investigation in the hydrogeological and microbiological sciences, and (2) practical limitations on the ability to accurately define microbial populations in environmental samples. However, advances in application of small-scale sampling methods and interdisciplinary approaches to site investigations are beginning to significantly improve understanding of hydrogeological and microbiological interactions. Likewise, culture-based and molecular analyses of microbial populations in subsurface contaminant plumes have revealed significant adaptation of microbial populations to plume environmental conditions. Results of recent studies suggest that variability in subsurface geochemical and hydrological conditions significantly influences subsurface microbial-community structure. Combined investigations of site conditions and microbial-community structure provide the knowledge needed to understand interactions between subsurface microbial populations, plume geochemistry, and contaminant biodegradation. La biodégradation efficace des polluants souterrains requiert deux éléments: des populations microbiennes possédant les aptitudes nécessaires à la dégradation, et des conditions géochimiques et hydrologiques souterraines favorables. Des contraintes pratiques sur la conception et l'interprétation des expériences à la fois en microbiologie et en hydrogéologie ont conduit à une connaissance limitée des interactions entre les phénomènes hydrogéologiques et microbiologiques des environnements souterrains. Ces contraintes pratiques sont dues à des contradictions entre les échelles d'étude de l'hydrogéologie et de la microbiologie et à des limitations pratiques sur la capacitéà définir avec précision les populations microbiennes dans les échantillons. Cependant, des progrès dans l'application de méthodes d'échantillonnage à l'échelle locale et des approches pluridisciplinaires des études de terrain ont commencéà améliorer de façon significative notre compréhension des interactions hydrogéologiques et microbiologiques. De plus, les analyses moléculaires et sur les cultures des populations microbiennes présentes dans les panaches de pollution souterraine ont mis en évidence une adaptation significative de ces populations aux conditions environnementales du panache. Les résultats d'études récentes laissent penser que la variabilité des conditions géochimiques et hydrologiques souterraines influence significativement la structure des communautés microbiennes souterraines. Des recherches combinées sur les conditions de terrain et sur la structure des communautés microbiennes apportent les informations nécessaires à la compréhension des interactions entre les populations microbiennes souterraines, la géochimie du panache et la biodégradation du polluant. Para que la biodegradación de los contaminantes en el subsuelo sea eficiente se requiere: (1) una población microbiana con capacidad de degradación y (2) unas condiciones hidrológicas y geoquímicas favorables. Las restricciones de tipo práctico en los diseños y la interpretación de experimentos, tanto hidrogeológicos como microbiológicos, han dado lugar a un conocimiento limitado de la interrelación entre estas dos ciencias por lo que respecta al subsuelo. Estas restricciones incluyen: (1) inconsistencias entre las escalas de investigación en ambas ciencias (hidrogeología y microbiología) y (2) limitaciones prácticas para definir poblaciones microbianas en las muestras. Sin embargo, los avances en la aplicación de métodos de muestreo a pequeña escala y las investigaciones de campo con equipos interdisciplinares están mejorando significativamente el conocimiento de las interacciones entre hidrogeología y microbiología. Del mismo modo, los análisis moleculares y de cultivos sobre poblaciones microbianas en penachos contaminados han mostrado la adaptación de los microbios a las condiciones naturales. Estudios recientes sugieren que la variabilidad en las condiciones geoquímicas e hidrogeológicas del subsuelo afecta enormemente la estructura de la comunidad microbiana. Las investigaciones que combinan las condiciones del medio con la estructura de la comunidad microbiana proporcionarán el conocimiento necesario para entender las complejas relaciones entre las poblaciones microbianas subsuperficiales, la geoquímica de los penachos de contaminación y la biodegradación de los contaminantes.

La gestion sanitaire des élevages de rongeurs utilisés en recherche biomédicale: II. Les facteurs pouvant influencer I'implantation d'un programme de gestion sanitaire.

PubMed

1986-02-01

FACTORS INFLUENCING THE IMPLEMENTATION OF A MONITORING PROGRAM: This article outlines the principal factors that should be taken into account in a quality assurance program for rodents used in biomedical research.

Les accidents du travail dans le transport urbain en commun de la ville province de Kinshasa, République Démocratique du Congo: une étude transversale descriptive

PubMed Central

Wangata, Jemima; Elenge, Myriam; De Brouwer, Christophe

2014-01-01

Introduction Le transport en commun urbain constitue un secteur où les travailleurs sont très exposés aux accidents du travail. Cette étude visait une description épidémiologique des accidents du travail dans le secteur informel du transport en commun à Kinshasa en vue d'apporter les pistes d'amélioration de la sécurité des travailleurs dans cette activité. Méthodes Un questionnaire sur les accidents du travail, administré en Décembre 2012 a permis d'explorer les tendances significatives entre les accidents et leurs circonstances, leurs facteurs associés, leurs conséquences au sein d'une population des travailleurs (n = 472) du transport en commun à Kinshasa. Résultats Durant les 12 derniers précédant l’étude 76.5% des travailleurs ont connu au moins un accident du travail, 54,8% ont connu un arrêt d'au moins 1jour. Les accidents liés à la circulation routière étaient plus important suivis des chutes. Les facteurs ayant montré des différences significatives étaient le travail sous l'influence de l'alcool et le port des équipements de protection individuelle. Les plaies (46,3%) et les contusions (39,4%) étaient les lésions les plus courantes. Les membres supérieurs (51,3%) et inférieurs (30,7%) étaient les plus atteints. 76,6% des travailleurs ont assumé seuls leur prise en charge médicale. Conclusion L'incidence des accidents du travail dans ce secteur est très élevée. La mise en place d'une politique de prévention et gestion de différents facteurs associés ainsi qu'un système de déclaration d'accidents est nécessaire dans ce secteur. Les patrons ainsi que les politiques devraient veiller à une prise en charge médicale correcte pour des travailleurs accidentés. PMID:25667703

Fissureless fissure-last video-assisted thoracoscopic lobectomy for all lung lobes: a better alternative to decrease the incidence of prolonged air leak?

PubMed

Stamenovic, Davor; Bostanci, Korkut; Messerschmidt, Antje; Jahn, Tillmann; Schneider, Thomas

2016-07-01

Prolonged air leak (PAL) after major lung resections is a common postoperative complication that leads to extended length of hospital stay (LOS) and increased hospital costs. Dissection of the lung tissue through the fissure may increase the incidence of PAL especially in the patients with incomplete fissures. The objective of this study was to evaluate the impact of the fissureless fissure-last technique in VATS lobectomy on immediate outcome, especially relating to air leak and LOS. This is an observational analysis on prospectively collected data of a single thoracic surgery unit. A total of 54 consecutive patients underwent VATS lobectomy and mediastinal lymphadenectomy-in 24 patients conventional VATS lobectomy (Group 1), in 30 patients fissureless VATS lobectomy (Group 2) was performed. The two groups were compared according to preoperative, operative and postoperative parameters. No differences were found when comparing patient characteristics, operation time (M1 = 185 min; M2 = 176 min; P = 0.52) and number of staplers used (M1 = 6.2; M2 = 7.7; P = 0.088). The presence of air leak (P = 0.004; RR = 3.5), PAL (P = 0.003; RR = 10), in days with chest tube (M1 = 7.2; M2 = 4.2; P = 0.028) and LOS (M1 = 12.7; M2 = 8.9; P = 0.020) was significantly more frequent in patients that underwent conventional VATS lobectomy. Focusing on the air leak, significance was present in male gender (P = 0.034; RR = 2.41), higher ASA (M1 = 3.04; M2 = 2.67; P = 0.012), postoperative complications other than air leak (P = 0.001; RR = 5.78) and age between groups with and without air leak (M1 = 63.9; M2 = 74.1; P < 0.001). Fissureless fissure-last VATS lobectomy is a feasible and equivalent to conventional VATS lobectomy in terms of operation time, stapler use and complications. Fissureless fissure-last VATS lobectomy, however, appears to be a superior technique to conventional VATS lobectomy in terms of preventing PAL and reducing the LOS. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Very-low-frequency resistivity, self-potential and ground temperature surveys on Taal volcano (Philippines): Implications for future activity

NASA Astrophysics Data System (ADS)

Zlotnicki, J.; Vargemezis, G.; Johnston, M. J. S.; Sasai, Y.; Reniva, P.; Alanis, P.

2017-06-01

Taal volcano is one of the most dangerous volcanoes in the Philippines. Thirty-three eruptions have occurred through historical time with several exhibiting cataclysmic phases. Most recent eruptions are confined to Volcano Island located within the prehistoric Taal collapse caldera that is now filled by Taal Lake. The last eruptive activity from 1965 to 1977 took place from Mt. Tabaro, about 2 km to the southwest of the Main Crater center. Since this time, episodes of seismic activity, ground deformation, gas release, surface fissuring, fumarole activity and temperature changes are recorded periodically around the main crater, but no major eruption has occurred. This period of quiescence is the third longest period without eruptive activity since 1572. In March 2010, a campaign based on Very-Low-Frequency (VLF) resistivity surveys together with repeated surveys of self-potential, ground temperature and fissure activity was intensified and the results compared to a large-scale Electrical Resistivity Tomography experiment. This work fortunately occurred before, within and after a new seismovolcanic crisis from late April 2010 to March 2011. The joint analysis of these new data, together with results from previous magnetotelluric soundings, allows a better description of the electrical resistivity and crustal structure beneath the Main Crater down to a depth of several kilometers. No indication of growth of the two geothermal areas located on both sides of the northern crater rim was apparent from 2005 to March 2010. These areas appear controlled by active fissures, opened during the 1992 and 1994 crises, that dip downward towards the core of the hydrothermal system located at about 2.5 km depth beneath the crater. Older mineralized fissures at lower elevations to the North of the geothermal areas also dip downward under the crater. Repeated self-potential and ground temperature surveys completed between 2005 and 2015 show new geothermal and hydrothermal activity in the areas of these older mineralized fissures that occurred during the April 2010 to March 2011 seismovolcanic crisis. This dramatically extends the geothermal activity further to the North on the volcano. The occurrence of these newly activated fissures after a long period of quiescence and indications of inflation in mid-2010 under the North rim of the Main Crater suggests that new eruptive activity near the North rim of the crater could occur in the future.

Volcanisme, activité anthropique et circulation des masses océaniques : leur influence respective sur la distribution des populations d'ostracodes dans la baie de Kagoshima (île de Kyushu, Japon)Impact of volcanism, human activities, and water mass circulation on the distribution of ostracod populations in Kagoshima Bay (Kyushu Island, southern Japan)

NASA Astrophysics Data System (ADS)

Bodergat, Anne-Marie; Oki, Kimihiko; Ishizaki, Kunihiro; Rio, Michel

2002-11-01

The distribution of ostracod populations in Kagoshima Bay (Japan) is analysed with reference to different environmental parameters. The bay is an area of volcanic activity of Sakurajima volcano under the influence of the Kuroshio Current. Most of the Head environment is occupied by an acidic water mass. Numbers of individual and species decrease from the Mouth of the bay towards the Basin and Head environments. In this latter, acidic water mass has a drastic effect on ostracod populations, whereas volcanic ashes and domestic inputs are not hostile. Ostracod distribution is influenced by the quality and structure of water masses. To cite this article: A.-M. Bodergat et al., C. R. Geoscience 334 (2002) 1053-1059.

Influence du traitement ionisant par rayonnement γ sur le pouvoir antioxydant de fractions polyphénoliques issues de substances d'origine végétale

NASA Astrophysics Data System (ADS)

Stuyck, S.; Connaulte, J.; Lesgards, G.; Prost, M.; Raffi, J.

1998-04-01

Ionizing radiation of vegetables is a cleaning up and preservation physical treatment which consists in submitting them to γ radiation, X radiation or electrons beam. This study deals with the influence of γ radiation on antioxidative effect of vegetables polyphenolic parts. In that purpose, we use a simple biological test based on erythrocytes haemolysis. Le traitement ionisant des produits végétaux est un procédé physique d'assainissement et de conservation qui consiste à les soumettre à l'action de rayonnements γ, de rayons X ou de faisceaux d'électrons. Ce travail porte sur l'étude de l'influence des rayonnements γ sur le pouvoir antioxydant de fractions polyphénoliques issues de substances d'origine végétale. Pour cela, un test biologique basé sur l'hémolyse d'érythrocytes est utilisé.

Evolution des contraintes résiduelles dans des films minces de tungstène en fonction de l'irradiation

NASA Astrophysics Data System (ADS)

Durand, N.; Badawi, K. F.; Goudeau, P.; Naudon, A.

1994-01-01

The influence of the irradiation dose upon the residual stresses in 1 000 Å tungsten thin films has been studied by two different techniques. Results show a relaxation of the strong initial compressive stresses σ=- 4,5 GPa) in virgin samples when the irradiation dose increases. The existence of a relaxation threshold is also clearly evidenced, it indicates a strong correlation between the thin film microstructure (point defects, grain size) and the relaxation phenomenon, and consequently, the residual stresses. Nous avons étudié, par deux méthodes différentes, l'évolution des contraintes résiduelles dans des couches minces de 1 000 Å de W en fonction de la dose d'irradiation. Ces expériences mettent en évidence une relaxation des fortes contraintes de compression (σ=- 4,5 GPa) observées dans les échantillons vierges quand la dose de l'irradiation augmente. Notre étude montre par ailleurs, l'existence d'un seuil de relaxation et relie de façon indiscutable, la microstructure de la couche mince (défauts ponctuels, taille de grains) au phénomène de relaxation, donc aux contraintes elles-mêmes.

Influence des interactions entre écrans de soutènement sur le calcul de la butée

NASA Astrophysics Data System (ADS)

Magnan, Jean-Pierre; Meyer, Grégory

2018-05-01

La mobilisation de la butée devant un écran implique un volume de sol important, sur une distance plus grande que la fiche et qui dépend des paramètres du calcul. L'article passe en revue les méthodes de calcul utilisées pour évaluer la butée, en insistant sur la distance nécessaire au libre développement du mécanisme de butée. Il évalue ensuite de différentes façons l'effet de l'interaction entre deux écrans placés face à face de part et d'autre d'une excavation. La méthode recommandée pour calculer la butée mobilisable consiste à faire un calcul en éléments finis avec des valeurs réduites des paramètres de résistance au cisaillement dans la zone où se développera la butée. Cette démarche permet de déterminer des facteurs correctifs à appliquer au calcul de la butée d'un écran isolé en fonction du rapport de la distance entre écrans à leur fiche.

L’opinion des étudiants en médecine de Québec sur les punitions corporelles

PubMed Central

Labbé, Jean; Laflamme, Nathalie; Makosso-Kallyth, Sun

2012-01-01

OBJECTIF : L’objectif de la présente étude est de décrire l’opinion des étudiants en médecine de l’Université Laval sur le sujet controversé des punitions corporelles envers les enfants. MÉTHODOLOGIE : Un sondage a été réalisé auprès des étudiants en quatrième année de médecine de l’Université Laval pendant cinq années consécutives, soit de l’année scolaire 2006–2007 jusqu’à celle de 2010–2011 inclusivement, à l’occasion d’un séminaire portant sur la maltraitance envers les enfants. RÉSULTATS : Sur les 712 étudiants interrogés, 74 % étaient de sexe féminin et 91 % étaient âgés de moins de 30 ans. Concernant les punitions corporelles envers les enfants, 22 % des répondants s’y sont déclarés favorables. Plus de garçons que de filles se sont prononcés en faveur de cette pratique disciplinaire, soit 31 % des garçons par rapport à 18 % des filles respectivement (RC rajusté = 2,2, IC 95 % :1,4 à 3,4; p=0,0003). Près de 36 % des étudiants ayant eu des punitions corporelles y étaient favorables, comparativement à seulement 4 % de ceux qui n’avaient pas connu cette forme de discipline (RC rajusté = 16,5, IC 95 % :8,6 à 31,4; p<0,0001). Parmi ceux qui ont mentionné avoir été victimes d’abus physique, 25 % se sont déclarés en faveur de cette pratique, ce qui est similaire au 21 % observés chez ceux qui n’en ont pas été victimes (p=0,52). CONCLUSION : Alors que plusieurs organismes médicaux se sont prononcés contre l’utilisation des punitions corporelles, plus d’un futur médecin sur cinq à Québec se déclare favorable à cette méthode disciplinaire et pourrait influencer la conduite des parents en ce sens. PMID:24179417

[Acute anal pain].

PubMed

Pittet, Olivier; Demartines, Nicolas; Hahnloser, Dieter

2013-07-01

Acute anal pain is a common proctological problem. A detailed history together with the clinical examination are crucial for the diagnosis. An acute perianal vein thrombosis can be successfully excised within the first 72 hours. Acute anal fissures are best treated conservatively using stool regulation and topical medications reducing the sphincter spasm. A chronic anal fissure needs surgery. Perianal abscesses can very often be incised and drained in local anesthesia. Proctalgia fugax and the levator ani syndrome are exclusion diagnoses and are treated symptomatically.

Artificial recharge through a well in fissured carbonate rock, west St. Paul, Minnesota

USGS Publications Warehouse

Reeder, Harold O.; Wood, Warren W.; Ehrlich, G.G.; Sun, Ren Jen

1976-01-01

The injection test demonstrated that it is hydrologically feasible to recharge the Prairie du Chien Group and the Jordan Sandstone artificially through wells completed in the Prairie du Chien Group. The fissures in the Prairie du Chien Group act as conduits through which water spreads. The water passes into the Jordan Sandstone from the Prairie du Chien over a larger area than it would if it were injected directly into the Jordan.

East Pacific rise at 21°N: the volcanic, tectonic, and hydrothermal processes of the central axis

USGS Publications Warehouse

Ballard, Richard D.; Francheteau, Jean; Juteau, Tierre; Rangan, Claude; Normark, William

1981-01-01

Photographs obtained by the ANGUS survey system at 21°N reveal many similarities to the geological processes delineated at other spreading centers and in particular those observed in the Galapagos Rift at 86°W. The region of recent volcanism is restricted to a narrow zone (Zone 1) approximately 1 km wide. This suggests that the width of the magma chamber feeding these flows is also narrow at the top. Variations in sediment cover are used to subdivide the flows within Zone 1 into three sheet-flow/pillow-flow pairs. The youngest pair appears to have erupted form a linear fissure 8 km long running parallel to the valley axis. This fissure is part of a larger en echelon pattern of eruptive fissures. Active hydrothermal vents associated with the youngest flows are situated directly above the apparent eruptive fissure. The high (350°C) temperature for some of the fluids exiting from the vents suggests a highly restricted circulation system involving, at times, little to no mixing with cold seawater. The lava terrain in the remainder of Zone 1 and bordering regions is characterized by extensive fracturing, further suggesting a narrow upper dimension to the magma chamber and also that subsurface hydrothermal deposition of massive sulfides may lead to a reduction in the mixing processes.

East Pacific Rise at 21 °N: The volcanic, tectonic, and hydrothermal processes of the central axis

USGS Publications Warehouse

Ballard, Richard D.; Francheteau, Jean; Juteau, Tierre; Rangan, Claude; Normark, William R.

1981-01-01

Photographs obtained by the ANGUS survey system at 21°N reveal many similarities to the geological processes delineated at other spreading centers and in particular those observed in the Galapagos Rift at 86°W. The region of recent volcanism is restricted to a narrow zone (Zone l) approximately l km wide. This suggests that the width of the magma chamber feeding these flows is also narrow at the top. Variations in sediment cover are used to subdivide the flows within Zone 1 into three sheet-flow/pillow-flow pairs. The youngest pair appears to have erupted form a linear fissure 8 km long running parallel to the valley axis. This fissure is part of a larger en echelon pattern of eruptive fissures. Active hydrothermal vents associated with the youngest flows are situated directly above the apparent eruptive fissure. The high (350°C) temperature for some of the fluids exiting from the vents suggests a highly restricted circulation system involving, at times, little to no mixing with cold seawater. The lava terrain in the remainder of Zone l and bordering regions is characterized by extensive fracturing, further suggesting a narrow upper dimension to the magma chamber and also that subsurface hydrothermal deposition of massive sulfides may lead to a reduction in the mixing processes.

Parents' Attitude towards the Use of Fluorides and Fissure Sealants and its Effect on their Children's Oral Health.

PubMed

Blumer, Sigalit; Ratson, Tal; Peretz, Benjamin; Dagon, Nurit

To characterize the attitudes of Israeli parents towards caries preventive measures. participating parents completed a 21-item questionnaire on their demographics, dental history, attitudes and satisfaction from fluorides and fissure sealants. One hundred parents (average age 41.62±4.9 years, 85 females) participated. Most of the parents (88% of the mothers and 84% of the fathers) had an academic education. Most of the parents (54%) had a favorable attitude towards the use of fluoridated gels, while only 37% of them had a positive opinion regarding fluoridated water. The satisfaction levels were very high regarding fissure sealants, fluoridated mouth rinses and fluoridated gels (78.1%, 73.6% and 72.5% respectively). The satisfaction from fluoridated water was split almost equally (50.8% were 'pleased' and 49.2% 'not pleased'). The main source for parental oral health knowledge was the dentist (83%). Parents' attitude towards caries preventive measures was significantly correlated to their gender, dental experience, level of education and the number of children in the family. positive attitude towards caries preventive measures was found among parents with higher awareness for preventive oral health measures and among bigger families. Mothers were more positive about fissure sealants than fathers. Mothers with up to 12 years of education tended to have a positive opinion regarding water fluoridation.

A comparative study of fissure sealants Helioseal Clear Chroma and Delton FS(+): 3 year results.

PubMed

Kargul, B; Tanboga, I; Gulman, N

2009-12-01

To evaluate the retention rates of a resin based colour changing fissure sealant (Helioseal Clear Chroma; Ivoclar Vivadent AG Schaan, Liechtenstein) compared with a coloured resin based fluoride fissure sealant (Delton FS(+); Dentsply De Trey GmbH,Konstanz,Germany). The fissure sealants (FS) were placed on all 4 caries-free first permanent molars of 31 children aged 6-9 years, using a half mouth experimental design by a paediatric dentist according to the manufacturers' instructions. A total of 121 FS were placed at baseline. Teeth were evaluated at 3 month intervals for 36 months where a preventive program including topical fluoride application was applied. Retention rates for 36 months showed a differences between Delton FS(+) and Helioseal Clear Chroma that were statistically significant (p<0.05). Delton FS(+) had total retention rate of 30.4% for 36 months compared with Helioseal Clear Chroma at 10.8% for the same evaluation period. Although Delton FS(+) showed significantly better results than Helioseal Clear Chroma for the evaluation periods, there were no statistically significant differences between Delton FS(+) (90.7%) and Helioseal Clear Chroma (80.4%) with respect to caries incidence at 36 months(p>0.05). Delton FS(+) showed a better complete retention rate for occlusal FS at one year. Both FS were aesthetically acceptable and easy to see during application and follow-up periods and gave significant protection from occlusal decay.

Endoscopic transmaxillary transMüller's muscle approach for decompression of superior orbital fissure: a cadaveric study with illustrative case.

PubMed

Wang, Xiang; Li, Yi-Ming; Huang, Cheng-Guang; Liu, Hong-Chao; Li, Qing-Chu; Yu, Ming-Kun; Hou, Li-Jun

2014-03-01

In an effort to avoid the damage and inconvenience associated with transcranial approaches, we developed an endoscopic transmaxillary transMüller's muscle approach for decompression of the superior orbital fissure (SOF). The endoscopic transmaxillary transMüller's muscle route was performed in ten cadaveric heads. We measured important anatomic landmarks, and angles radiographically. This approach was initially attempted in one patient with traumatic superior orbital fissure syndrome (tSOFS). A maxillary antrostomy was carried out with a buccal sulcus incision. The sinus ostium and the course of infraorbital nerve were used as endoscopic anatomic landmarks. Then the inferior orbital fissure was drilled out, followed by separating the Müller's muscle. The periorbita were peeled off from the lateral wall, followed by the endoscope going along the periorbital space, until the lateral aspect of the SOF could be visualized. Decompression was successfully performed in all specimens. The initial clinical application justified this approach. The patient had an uneventful postoperative course and satisfactory recovery. This approach offers sufficient endoscopic visualization and reliable decompression of SOF. It avoids the need for brain retraction, temporalis muscle manipulation, or any external incision, and appears to be able to deliver satisfying aesthetic results as well as favourable functional recovery. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

East Pacific rise at 21°N: The volcanic, tectonic, and hydrothermal processes of the central axis

NASA Astrophysics Data System (ADS)

Ballard, Robert D.; Francheteau, Jean; Juteau, Tierre; Rangan, Claude; Normark, William

1981-09-01

Photographs obtained by the ANGUS survey system at 21°N reveal many similarities to the geological processes delineated at other spreading centers and in particular those observed in the Galapagos Rift at 86°W. The region of recent volcanism is restricted to a narrow zone (Zone 1) approximately 1 km wide. This suggests that the width of the magma chamber feeding these flows is also narrow at the top. Variations in sediment cover are used to subdivide the flows within Zone 1 into three sheet-flow/pillow-flow pairs. The youngest pair appears to have erupted form a linear fissure 8 km long running parallel to the valley axis. This fissure is part of a larger en echelon pattern of eruptive fissures. Active hydrothermal vents associated with the youngest flows are situated directly above the apparent eruptive fissure. The high (350°C) temperature for some of the fluids exiting from the vents suggests a highly restricted circulation system involving, at times, little to no mixing with cold seawater. The lava terrain in the remainder of Zone 1 and bordering regions is characterized by extensive fracturing, further suggesting a narrow upper dimension to the magma chamber and also that subsurface hydrothermal deposition of massive sulfides may lead to a reduction in the mixing processes.

Spatially resolved near infrared observations of Enceladus' tiger stripe eruptions from Cassini VIMS

NASA Astrophysics Data System (ADS)

Dhingra, Deepak; Hedman, Matthew M.; Clark, Roger N.; Nicholson, Philip D.

2017-08-01

Particle properties of individual fissure eruptions within Enceladus' plume have been analyzed using high spatial resolution Visible and Infrared Mapping Spectrometer (VIMS) observations from the Cassini mission. To first order, the spectra of the materials emerging from Cairo, Baghdad and Damascus sulci are very similar, with a strong absorption band around 3 μm due to water-ice. The band minimum position indicates that the ice grains emerging from all the fissures are predominantly crystalline, which implies that the water-ice particles' formation temperatures are likely above 130 K. However, there is also evidence for subtle variations in the material emerging from the different source fissures. Variations in the spectral slope between 1-2.5 μm are observed and probably reflect differences in the size distributions of particles between 0.5 and 5 μm in radius. We also note variations in the shape of the 3 μm water-ice absorption band, which are consistent with differences in the relative abundance of > 5 μm particles. These differences in the particle size distribution likely reflect variations in the particle formation conditions and/or their transport within the fissures. These observations therefore provide strong motivation for detailed modeling to help place important constraints on the diversity of the sub-surface environmental conditions at the geologically active south-pole of Enceladus.

Spatial Variability in Enceladus' Plume Material Properties across Tiger Stripes: Observed Correlations and Implications

NASA Astrophysics Data System (ADS)

Dhingra, D.; Hedman, M. M.; Clark, R. N.; Postberg, F.

2016-12-01

The plume material emerging from Enceladus' south-pole has contributions from many sources distributed along four distinct fissures designated as Alexandria, Cairo, Baghdad and Damascus. In principle, the properties of the material escaping into the plume would depend upon the conditions within these individual fissures. Therefore, the particles emitted from different sources could have different properties. Indeed, observations made by the Visual and Infrared Mapping Spectrometer (VIMS) and Cosmic Dust Analyzer (CDA) instruments indicate differences in the water-ice grain sizes and abundance of organic-rich particles along the various fissures. These differences can be detected in both the plume surface deposits around the fissures [e.g. Brown et al., 2006; Jaumann et al, 2008] as well as in the active plume eruptions [Postberg et al., 2011; Dhingra et al., 2015, 2016]. Furthermore, these variations may represent systematic trends in particle size and organic content across the south polar terrain. We are analyzing these spatial correlations between different parameters and what they mean for the sub-surface environment in the active south polar terrain of Enceladus. Brown et al. (2006) Science, 311, 1425-1428Dhingra at al. (2015) 46th Lunar Planet. Sci. Conf., Abst#1648Dhingra et al. (2016) Icarus, under reviewJaumann et al. (2008) Icarus, 193, 407-419Postberg et al. (2011) Nature, 474, 620-622

Cerebellar foliation in rats. 2. Effects of maternal malnutrition on the formation of fissures in foetal rats.

PubMed

Conradi, N G; Müntzing, K

1985-11-01

The effects of maternal malnutrition on the formation of cerebellar fissures was studied in foetal rats. The rats were given a diet containing either 14 (normal) or 7 (protein-deprived) per cent protein by weight from two weeks before conception and throughout gestation. The first day with a sperm-positive vaginal smear was designated as Embryonic day 1 (E 1). Foetuses were examined on days E 19 to 22. In seventy-five foetuses, a sagittal slice of the cerebellum, 3-4 mm thick was embedded in Sorvall embedding medium. Sagittal sections, 2 micron thick were cut at levels 100 micron apart through the specimen. Sixty-three foetuses were examined for presence of cerebellar fissures only after filling their vascular system with ink-gelatin and cutting serial sagittal frozen sections, 100 micron thick. A morphological comparison of the foliation in normal and malnourished foetuses suggested a slight delay in the malnourished ones, albeit the earliest fissures were visible on the same day as in normal foetuses. The existence of a developmental alteration due to malnutrition was demonstrated by a decrease in the length of the pial surface and a surface folding index day on E 22. The alteration is discussed in relation to previously reported changes in cerebellar development during malnutrition, such as delayed Purkinje cell formation and alterations in proliferation/differentiation in the EGL.

Microscopic effects of predator digestion on the surfaces of bones and teeth.

PubMed

Rensberger, J M; Krentz, H B

1988-09-01

Concentrations of small fossil mammals are frequently encountered in Cenozoic deposits, but the causes for such accumulations have seldom been determined. In many cases the tooth, jaw, and limb fragments appear to be well-preserved under light microscopy, and it is difficult to differentiate damage due to predator digestion from breakage and abrasion due to physical agents. In order to find more specific evidence of predator digestion, we used a scanning electron microscope (SEM) to examine the surface microstructure of bones and teeth consumed by Bubo virginianus (great horned owl) and Canis latrans (coyote), which prey upon similar species. Effects of digestion were found on all the digested bones and teeth examined. The effects on bone include distinctive sets of pits and fissures, dissolution, and physical polishing. The pits and fissures are apparently caused by solution that commences in canals beneath the surface of the bone. The most conspicuous effects on teeth are island-like pillars of dentin surrounded by deep solution fissures. The effects of digestion by coyote and owl are fundamentally the same but differ in degree of development. Bone digested by the owl shows a greater degree of polishing and rounding of edges but has less extensive fissuring. Wide variation in the degree of surface damage occurs in bones digested by the coyote, even within a single fecal pellet.

Internal stresses, dislocation mobility and ductility

NASA Astrophysics Data System (ADS)

Saada, G.

1991-06-01

The description of plastic deformation must take into account individual mechanisms and heterogeneity of plastic strain. Influence of dislocation interaction with forest dislocations and of cross slip are connected with the organization of dipole walls. The latter are described and their development is explained as a consequence of edge effects. Applications are discussed. La description de la déformation plastique doit prendre en compte les interactions individuelles des dislocations et l'hétérogénéité à grande échelle de la déformation plastique. Les interactions des dislocations mobiles avec la forêt de dislocations, le glissement dévié, ont pour effet la création de parois dipolaires. Celles-ci sont décrites et leur développement est appliqué à partir des effets de bord.

Carbon Dioxide Capture by Deep Eutectic Solvent Impregnated Sea Mango Activated Carbon

NASA Astrophysics Data System (ADS)

Zulkurnai, N. Z.; Ali, U. F. Md.; Ibrahim, N.; Manan, N. S. Abdul

2018-03-01

The increment amount of the CO2 emission by years has become a major concern worldwide due to the global warming issue. However, the influence modification of activated carbon (AC) has given a huge revolution in CO2 adsorption capture compare to the unmodified AC. In the present study, the Deep Eutectic Solvent (DES) modified surface AC was used for Carbon Dioxide (CO2) capture in the fixed-bed column. The AC underwent pre-carbonization and carbonization processes at 519.8 °C, respectively, with flowing of CO2 gas and then followed by impregnation with 53.75% phosphoric acid (H3PO4) at 1:2 precursor-to-activant ratios. The prepared AC known as sea mango activated carbon (SMAC) was impregnated with DES at 1:2 solid-to-liquid ratio. The DES is composing of choline chloride and urea with ratio 1:2 choline chloride to urea. The optimum adsorption capacity of SMAC was 33.46 mgco2/gsol and 39.40 mgco2/gsol for DES modified AC (DESAC).

Modelisation par elements finis du muscle strie

NASA Astrophysics Data System (ADS)

Leonard, Mathieu

Ce present projet de recherche a permis. de creer un modele par elements finis du muscle strie humain dans le but d'etudier les mecanismes engendrant les lesions musculaires traumatiques. Ce modele constitue une plate-forme numerique capable de discerner l'influence des proprietes mecaniques des fascias et de la cellule musculaire sur le comportement dynamique du muscle lors d'une contraction excentrique, notamment le module de Young et le module de cisaillement de la couche de tissu conjonctif, l'orientation des fibres de collagene de cette membrane et le coefficient de poisson du muscle. La caracterisation experimentale in vitro de ces parametres pour des vitesses de deformation elevees a partir de muscles stries humains actifs est essentielle pour l'etude de lesions musculaires traumatiques. Le modele numerique developpe est capable de modeliser la contraction musculaire comme une transition de phase de la cellule musculaire par un changement de raideur et de volume a l'aide des lois de comportement de materiau predefinies dans le logiciel LS-DYNA (v971, Livermore Software Technology Corporation, Livermore, CA, USA). Le present projet de recherche introduit donc un phenomene physiologique qui pourrait expliquer des blessures musculaires courantes (crampes, courbatures, claquages, etc.), mais aussi des maladies ou desordres touchant le tissu conjonctif comme les collagenoses et la dystrophie musculaire. La predominance de blessures musculaires lors de contractions excentriques est egalement exposee. Le modele developpe dans ce projet de recherche met ainsi a l'avant-scene le concept de transition de phase ouvrant la porte au developpement de nouvelles technologies pour l'activation musculaire chez les personnes atteintes de paraplegie ou de muscles artificiels compacts pour l'elaboration de protheses ou d'exosquelettes. Mots-cles Muscle strie, lesion musculaire, fascia, contraction excentrique, modele par elements finis, transition de phase

Review of the critical current densities and magnetic irreversibilities in high T_c superconductors

NASA Astrophysics Data System (ADS)

Senoussi, S.

1992-07-01

This review article is concerned with critical current density (J) and magnetic irreversibilities in high-T_c superconductors (HTSC). The apparent J derived from different experimental techniques (transport, hysteresis cycle, ac-susceptibility) are compared. The influence of time (relaxation effects) as well as the macroscopic size of the sample on the criteria defining J are discussed. The dependences of the critical current on grain boundaries (“weaks-links”), texturing and other physical and chemical defects are examined in detail. The role of self fields is clarified. The critical current is strongly influenced by the anisotropy of the layered structure practically whatever the experimental conditions. Intrinsic pinning is lowered by defects. Demagnetizing effects and surface pinnings are reviewed. The usual critical state and flux creep models are recalled emphasizing the physical aspects most specific to HTSC. A theoretical model which takes into account the equilibrium magnetization and sample granularity is developed. It reproduces most of the characteristic features of both the hysteresis cycle and ac-susceptibility. A number of new formulae are introduced. They generalize the Bean model and show how to correct for the dimensions of the grains (granular materials), the macroscopic radius of the sample, anisotropy and demagnetization effects in certain situations. Several limits beyond which the usual critical state breaks down are discussed: (1) the quasi elastic limit where the variable field is too weak to depin the vortices, (2) H≈ H_C1 so that the interaction between vortex lines is exponentially weak and (3) T and H close to the “irreversibility line” where the influence of viscous forces are strong. (4) Hgg H_C1 so that J is governed by collective pinning. Ce papier de revue est consacré aux courant critiques (J) et aux irréversibilités magnétiques dans les nouveaux matériaux supraconducteurs (HTSC). Nous y comparons les densités des courants critiques effectives déduites à partir des techniques expérimentales les plus courantes (transport, cycle d'hystérésis, susceptibilité alternative, ...). L'influence de l'échelle du temps de la mesure et de la taille effective de l'échantillon sur les divers critères définissant J est examinée en détail. La dépendance de ce courant en fonction des joints de grains (“liens faibles”), du degré de texture et des autres défauts physiques et chimiques est discutée. Le rôle du champ propre est clarifié. Le courant critique est très dépendant de l'anisotropie de l'échnatillon dans pratiquement toutes les conditions expérimentales. L'ancrage intrinsèque est détérioré par les défauts. Le rôle des effets démagnétisants et de la surface de l'échantillon sur les résultats expérimentaux est passé en revue. Les modèles de l'état critique et de “flus creep” sont rappelés en insistant sur les aspects les plus spécifiques des HTSC. Un modèle théorique est proposé. Il tient compte de l'aimantation réversible, des aspects granulaires et reproduit à la fois les propriétés les plus typiques des cycles d'hystérésis et de la suscceptibilité alternative. Plusieurs formules nouvelles généralisant le modèle de Bean en sont déduites. Elles montrent comment tenir compte des dimensions des grains (matériaux granulaires), du rayon macroscopique, de l'anisotropie et des effets démagnétisants, dans certaines conditions. Plusieurs limites au-delà desquelles les concepts classiques de l'état critique cessent d'être valides sont également examinés : (1) la limite élastique où le champ de mesure est trop faible pour dépiéger les vortex, (2) H≈ H_C1 de sorte que les interactions entre vortex sont exponentiellement faibles et (3) et T voisins de la ligne d'irréversibilité où les forces de viscosité jouent un rôle prépondérant. (4) Hgg H_C1 de sorte que J est imposé par l'ancrage collectif.

Stratum corneum dysfunction in dandruff

PubMed Central

Turner, G A; Hoptroff, M; Harding, C R

2012-01-01

Summary Synopsis Dandruff is characterized by a flaky, pruritic scalp and affects up to half the world’s population post-puberty. The aetiology of dandruff is multifactorial, influenced by Malassezia, sebum production and individual susceptibility. The commensal yeast Malassezia is a strong contributory factor to dandruff formation, but the presence of Malassezia on healthy scalps indicates that Malassezia alone is not a sufficient cause. A healthy stratum corneum (SC) forms a protective barrier to prevent water loss and maintain hydration of the scalp. It also protects against external insults such as microorganisms, including Malassezia, and toxic materials. Severe or chronic barrier damage can impair proper hydration, leading to atypical epidermal proliferation, keratinocyte differentiation and SC maturation, which may underlie some dandruff symptoms. The depleted and disorganized structural lipids of the dandruff SC are consistent with the weakened barrier indicated by elevated transepidermal water loss. Further evidence of a weakened barrier in dandruff includes subclinical inflammation and higher susceptibility to topical irritants. We are proposing that disruption of the SC of the scalp may facilitate dandruff generation, in part by affecting susceptibility to metabolites from Malassezia. Treatment of dandruff with cosmetic products to directly improve SC integrity while providing effective antifungal activity may thus be beneficial. Résumé Les pellicules se caractérisent par un cuir chevelu prurigineux, squameux, et affectent jusqu’à la moitié de la population post-pubertaire du monde. L’étiologie des pellicules est multifactorielle, influencée par Malassezia, par la production de sébum, et par la susceptibilité individuelle. La levure commensale Malassezia est un facteur fortement contributif à la formation de pellicules, mais la présence de Malassezia aussi sur les cuirs chevelus sains indique que Malassezia seule n’est pas une cause suffisante. Un stratum corneum (SC) sain forme une barrière protectrice pour empêcher la perte d’eau et maintenir l’hydratation du cuir chevelu. Il protège également contre les agressions externes tels les micro-organismes, y compris Malassezia, ou des substances toxiques. Des dommages aigus ou chroniques au niveau de la barrière peuvent nuire à une bonne hydratation, conduisant à des effets atypiques de la prolifération épidermique, de la différenciation des kératinocytes, et de la maturation du SC, ce qui peut expliquer une partie des symptômes des pellicules. L’appauvrissement et la désorganisation des lipides structurels d’un stratum corneum sujet aux pellicules sont compatibles avec la notion d’une barrière affaiblie telle qu’indiquée par une perte d’eau transépidermique élevée. Une preuve supplémentaire d’une barrière affaiblie dans les cas des pellicules est fournie par un niveau d’inflammation infraclinique et une plus grande susceptibilité aux irritants topiques. Nous proposons que la perturbation du SC du cuir chevelu facilite la production de pellicules, en partie en augmentant la sensibilité aux métabolites de Malassezia. Le traitement des pellicules avec des produits cosmétiques pour améliorer directement l’intégrité du SC, tout en offrant une activité antifongique efficace peut donc être bénéfique. PMID:22515370

Dielectric elastomer for stretchable sensors: influence of the design and material properties

NASA Astrophysics Data System (ADS)

Jean-Mistral, C.; Iglesias, S.; Pruvost, S.; Duchet-Rumeau, J.; Chesné, S.

2016-04-01

Dielectric elastomers exhibit extended capabilities as flexible sensors for the detection of load distributions, pressure or huge deformations. Tracking the human movements of the fingers or the arms could be useful for the reconstruction of sporting gesture, or to control a human-like robot. Proposing new measurements methods are addressed in a number of publications leading to improving the sensitivity and accuracy of the sensing method. Generally, the associated modelling remains simple (RC or RC transmission line). The material parameters are considered constant or having a negligible effect which can lead to serious reduction of accuracy. Comparisons between measurements and modelling require care and skill, and could be tricky. Thus, we propose here a comprehensive modelling, taking into account the influence of the material properties on the performances of the dielectric elastomer sensor (DES). Various parameters influencing the characteristics of the sensors have been identified: dielectric constant, hyper-elasticity. The variations of these parameters as a function of the strain impact the linearity and sensitivity of the sensor of few percent. The sensitivity of the DES is also evaluated changing geometrical parameters (initial thickness) and its design (rectangular and dog-bone shapes). We discuss the impact of the shape regarding stress. Finally, DES including a silicone elastomer sandwiched between two high conductive stretchable electrodes, were manufactured and investigated. Classic and reliable LCR measurements are detailed. Experimental results validate our numerical model of large strain sensor (>50%).

Drone based structural mapping at Holuhraun indicates fault reactivation and complexity

NASA Astrophysics Data System (ADS)

Mueller, Daniel; Walter, Thomas R.; Steinke, Bastian; Witt, Tanja; Schoepa, Anne; Duerig, Tobi; Gudmundsson, Magnus T.

2016-04-01

Accompanied by an intense seismic swarm in August 2014, a dike laterally formed, starting under Icelands Vatnajökull glacier, propagating over a distance of more than 45 km within only two weeks, leading to the largest eruption by volume since the 1783-84 Laki eruption. Along its propagation path, the dike caused intense surface displacements up to meters. Based on seismicity, GPS and InSAR, the propagation has already been analysed and described as segmented lateral dike growth. We now focus on few smaller regions of the dike. We consider the Terrasar-X tandem digital elevation map and aerial photos and find localized zones where structural fissures formed and curved. At these localized, regions we performed a field campaign in summer 2015, applying the close range remote sensing techniques Structure from Motion (SfM) and Terrestrial Laser Scanning (TLS). Over 4 TLS scan were collected, along with over 5,000 aerial images. Point clouds from SfM and TLS are merged and compared, and local structural lineaments analysed. As a result, we obtained an unprecedentedly high-resolution digital elevation map. With this map, we analyse the structural expression of the fissure eruption at the surface and improve understanding on the conditions that influenced the magma propagation path. We elaborate scenarios that lead to complexities of the surface structures and the link to the underlying dike intrusion.

Migration of contaminants through the unsaturated zone overlying the Hesbaye chalky aquifer in Belgium: a field investigation.

PubMed

Brouyère, Serge; Dassargues, Alain; Hallet, Vincent

2004-08-01

This paper presents the results of a detailed field investigation that was performed for studying groundwater recharge processes and solute downward migration mechanisms prevailing in the unsaturated zone overlying a chalk aquifer in Belgium. Various laboratory measurements were performed on core samples collected during the drilling of boreholes in the experimental site. In the field, experiments consisted of well logging, infiltration tests in the unsaturated zone, pumping tests in the saturated zone and tracer tests in both the saturated and unsaturated zones. Results show that gravitational flows govern groundwater recharge and solute migration mechanisms in the unsaturated zone. In the variably saturated chalk, the migration and retardation of solutes is strongly influenced by recharge conditions. Under intense injection conditions, solutes migrate at high speed along the partially saturated fissures, downward to the saturated zone. At the same time, they are temporarily retarded in the almost immobile water located in the chalk matrix. Under normal recharge conditions, fissures are inactive and solutes migrate slowly through the chalk matrix. Results also show that concentration dynamics in the saturated zone are related to fluctuations of groundwater levels in the aquifer. A conceptual model is proposed to explain the hydrodispersive behaviour of the variably saturated chalk. Finally, the vulnerability of the chalk to contamination issues occurring at the land surface is discussed.

John Porter Book Prize Lecture: Bringing the Social Back In-On the Integration of Muslim Immigrants and the Jurisprudence of Muslim Minorities.

PubMed

Kazemipur, Abdolmohammad

2016-11-01

In much of the academic debate on the integration of Muslims into Western liberal democracies, Islam is often treated as one or the sole independent variable in the lives of Muslims. Offering to view Islam-or the understanding of Islam among Muslims-as the dependent variable, The Muslim Question in Canada discusses the influence of socioeconomic forces in shaping the Muslim immigrants' opinions, modes of thinking, and even interpretations of their faith. Drawing on this general approach, which is introduced and developed in the book using a variety of both quantitative and qualitative data, this article focuses on a school of thought within the Islamic jurisprudence known as fiqh al-aqalliyyat al-Muslema (the jurisprudence of Muslim minorities). The premise of the jurisprudence of Muslim minorities is that the lived realities of Muslims who reside in non-Muslim countries are so fundamentally different from those of the Muslim-majority nations that traditional Islamic jurisprudence cannot offer meaningful solutions for their problems. Therefore, there is a need to establish an entirely different jurisprudential approach centered around the lives of the Muslim minorities. The purpose of the bulk of jurisprudential theorization efforts in this line of reasoning is to facilitate the lives of the Muslim minorities; as well, they aim to create a foundation for the moral obligations of Muslims toward non-Muslims in such environments. I argue that a crucial element that triggers such a development is the existence of a positive relationship between Muslims and non-Muslims in immigrant-receiving countries. Souvent au sein des débats sur l'intégration des Musulmans dans des démocraties libérales de l'Ouest, l'Islam est traité comme un ou le seul enjeu dans la vie des fidèles. The Muslim Question in Canada examine l'Islam ou la compréhension de l'Islam chez les Musulmans comme un enjeu dépendent et aborde l'influence des forces socio-économiques sur les opinons des immigrants musulmans ainsi que sur leurs modes de pensée et même sur la manière dont ils interprètent leur foi. Inspiré par cette approche, que l'on présente et développe dans le livre, et qui se sert de données à la fois quantitatives et qualitatives, cet article se concentre sur une école de pensée à l'intérieur de la jurisprudence islamique, connue sous le nom de fiqh al aqalliyyat al-Muslema (la jurisprudence des minorités musulmanes). La prémisse de la jurisprudence des minorités musulmanes est que les réalités vécues par les Musulmans qui vivent dans des pays non-musulmans sont au fond tellement différentes de celles de la majorité musulmane que la jurisprudence traditionnelle ne présente pas de solutions pertinentes pour résoudre leurs problèmes. Ainsi, il faut établir une approche jurisprudentielle totalement différente, axée sur la vie des minorités musulmanes. L'objectif de la plupart des efforts au niveau de la théorisation de la jurisprudence qui adoptent cette vision est de rendre la vie des minorités musulmanes plus facile. Ces efforts tentent aussi de faire en sorte que les Musulmans ressentent une certaine obligation morale envers les non-Musulmans dans ces environnements. J'avance ici que l'aspect qui déclenche un tel développement est le rapport positif entre les Musulmans et les non-Musulmans dans les pays qui reçoivent des immigrants. © 2016 Canadian Sociological Association/La Société canadienne de sociologie.

Matériaux diélectriques à base de K_2Sr4Nb{10}O_{30} présentant des courbes \\varepsilon'_r = f (T) plates avec de hautes constantes diélectriques

NASA Astrophysics Data System (ADS)

Tribotté, B.; Desgardin, G.

1997-06-01

Type II ferroelectric ceramics are used in multilayers capacitors with high volume capacitance. Among different specifications concerning the variation of the dielectric constant versus temperature, one of the most restrictive class, the X7R one, allows only a variation of ±15 percent of the 25 ^{circ}C value of the permittivity in the wide range, -55 ^{circ}C to +125 ^{circ}C. Previous investigations have proved the interest to mix the niobate K2Sr4Nb{10}O{30}, with a Tetragonal Tungsten Bronze (TTB) structure, with perovskites as minor agents like Pb(Mg{1/3}Nb{2/3})O3, to obtain flat curves \\varepsilon'_r = f (T) with dielectric constant above 6000. To point out the mechanism leading to such curves, the influence of the introduction of different cations like Mg^{2+} or Pb^{2+} in the TTB structure has been studied. In the present work, we show that K2Sr{4}Nb{10}O{30}-based materials, without the presence of perovskite phase from XRD, can also exhibit \\varepsilon'_r= f (T) curves with a flat profile. Les céramiques ferroélectriques de type II sont couramment utilisées dans les condensateurs multicouches à forte capacité volumique. Parmi différentes classes concernant la variation de la constante diélectrique en fonction de la température, une des plus sévères, la X7R, autorise seulement une variation de ±15% de la capacité par rapport à celle à 25 ^{circ}C dans un large domaine de température, de -55 ^{circ}C à +125 ^{circ}C. Des études récentes ont prouvé l'intérêt de mélanger le niobate K2Sr4Nb{10}O{30}, de structure de type Bronze Quadratique de Tungstène (BQT), avec des pérovskites en faible proportion comme Pb(Mg{1/3}Nb{2/3})O3, pour obtenir des courbes plates \\varepsilon'_r = f (T), correspondant à des constantes moyennes superieures à 6000. Pour mettre en évidence le mécanisme conduisant à de telles courbes, nous avons étudié l'influence de l'introduction de différents cations comme Mg^{2+} ou Pb^{2+} dans la structure BQT. Dans ce travail, nous montrons que des matériaux à base de K2Sr4Nb{10}O{30}, sans présence simultanée de phase pérovskite d'après la diffraction des rayons X, peuvent conduire à des courbes \\varepsilon'_r= f (T) à caractère plat.

In vitro fragmentation efficiency of holmium: yttrium-aluminum-garnet (YAG) laser lithotripsy--a comprehensive study encompassing different frequencies, pulse energies, total power levels and laser fibre diameters.

PubMed

Kronenberg, Peter; Traxer, Olivier

2014-08-01

To assess the fragmentation (ablation) efficiency of laser lithotripsy along a wide range of pulse energies, frequencies, power settings and different laser fibres, in particular to compare high- with low-frequency lithotripsy using a dynamic and innovative testing procedure free from any human interaction bias. An automated laser fragmentation testing system was developed. The unmoving laser fibres fired at the surface of an artificial stone while the stone was moved past at a constant velocity, thus creating a fissure. The lithotripter settings were 0.2-1.2 J pulse energies, 5-40 Hz frequencies, 4-20 W power levels, and 200 and 550 μm core laser fibres. Fissure width, depth, and volume were analysed and comparisons between laser settings, fibres and ablation rates were made. Low frequency-high pulse energy (LoFr-HiPE) settings were (up to six times) more ablative than high frequency-low pulse energy (HiFr-LoPE) at the same power levels (P < 0.001), as they produced deeper (P < 0.01) and wider (P < 0.001) fissures. There were linear correlations between pulse energy and fragmentation volume, fissure width, and fissure depth (all P < 0.001). Total power did not correlate with fragmentation measurements. Laser fibre diameter did not affect fragmentation volume (P = 0.81), except at very low pulse energies (0.2 J), where the large fibre was less efficient (P = 0.015). At the same total power level, LoFr-HiPE lithotripsy was most efficient. Pulse energy was the key variable that drove fragmentation efficiency. Attention must be paid to prevent the formation of time-consuming bulky debris and adapt the lithotripter settings to one's needs. As fibre diameter did not affect fragmentation efficiency, small fibres are preferable due to better scope irrigation and manoeuvrability. © 2013 The Authors. BJU International © 2013 BJU International.

FREQUENCY OF POST-OPERATIVE FAECAL INCONTINENCE IN PATIENTS WITH CLOSED AND OPEN INTERNAL ANAL SPHINCTEROTOMY.

PubMed

Ghayas, Nighat; Younus, Syed Muneeb; Mirani, Abdul Jabbar; Ghayasuddin, Mohammed; Qazi, Aamna; Suchdev, Sunil Dutt; Bakshi, Saqib Kamran

2015-01-01

Fissure in ano is one of the commonest benign and painful proctologic diseases causing considerable morbidity and reduction in quality of life. There are medical as well as surgical treatment options for anal fissure. The study was conducted to compare the frequency of postoperative faecal incontinence in patients with closed lateral internal anal sphincterotomy with von-greaves knife versus standard Park's operation (open method) for chronic anal fissure. This was a randomized controlled trial (RCT) was conducted at the Department of Surgery, KVSS, S.I.T.E. Hospital, Karachi, for a period of six months from 13th February to 12th August 2011. Ninety four consecutive patients having chronic anal fissure were assigned through blocked randomization to groups A & B, with 47 patients in each group. Closed lateral internal anal sphincterotomy (CLIAS) via von-greaves knife was carried out in patients of group-A whereas patients of group-B were subjected to open internal anal sphincterotomy (OIAS) also known as Parks' procedure. Faecal incontinence was noted on the 5th post-operative day. Data was analysed using SPSS 16. There were 81 (86.2%) males and 13 (13.8%) females with male to female ratio being 6:1. Mean age was 38.38 mp ± 14.56 years. Post-operative faecal incontinence in patients undergoing CLIAS was 4.3% while it was 21.3% in those undergoing OIAS with a p-value of 0.027. CLIAS with von-greaves knife is effective in reducing faecal incontinence on 5th postoperative day as compared to standard OIAS. CLIAS with von-greaves knife is effective in reducing faecal incontinence on 5th postoperative day as compared to OIAS (Park's procedure). Therefore, this technique may be used in future regularly to treat chronic anal fissure for prevention of this morbidity.

A conceptual hydrodynamic model of a geological discontinuity in hard rock aquifers: Example of a quartz reef in granitic terrain in South India

NASA Astrophysics Data System (ADS)

Dewandel, Benoît; Lachassagne, Patrick; Zaidi, Faisal K.; Chandra, Subash

2011-08-01

SummaryThe structure and hydrodynamic properties of geological discontinuities and of a deeply weathered granite aquifer near these structures are described on the basis of geological, geophysical and hydrodynamic investigations in two sites of South India located along a 20-40-m-wide quartz reef intruding a weathered Archean biotite granite. One of the two sites also comprises a metre-wide dolerite dyke. Weathering processes appear to be at the origin of fissures development and of a related enhanced local hydraulic conductivity, both in the quartz reef and in the surrounding granite. The weathering profile in the granite (saprolite and fissured layer) is characterized by an abrupt deepening of the weathered layers in the granite near the contact and in the quartz reef itself. Therefore, the weathering profile shows a 'U'-shape geometry with, among others, the verticalization of the granite's fissured layer. The hydraulic conductivity of this verticalized layer is on average 5 × 10 -6 m/s and storativity about 10 -3 (-). The hydraulic conductivity of the fissured quartz is 4-6 × 10 -6 m/s and its storativity about 3-5 × 10 -4 (-). Both media are also characterized by a matrix hydraulic conductivity (10 -7-10 -9 m/s) and by a significant heterogeneity in hydrodynamic properties that generates preferential flow paths along the sub-vertical fissures parallel to the reef axis. A special attention has been paid for characterizing this heterogeneity. The weathering of the dolerite dyke, however, results in a local low hydraulic conductivity, which consequently does not enhance either the thickness of weathered granite layers or its hydraulic conductivity. The obtained results complete the conceptual hydrogeological model developed for weathered granite aquifers in characterizing the relationships between weathering processes and hydrodynamic properties near geological discontinuities.

Optimal Dosing of Botulinum Toxin for Treatment of Chronic Anal Fissure: A Systematic Review and Meta-Analysis.

PubMed

Lin, Jin Xin; Krishna, Sanjeev; Su'a, Bruce; Hill, Andrew G

2016-09-01

Chronic anal fissures are associated with significant morbidity and reduced quality of life. Studies have investigated the efficacy of botulinum toxin with variable results; thus, there is currently no consensus on botulinum toxin dose or injection sites. This study aimed to systematically analyze trials studying the efficacy of botulinum toxin for treatment of chronic anal fissure to identify an optimum dosage and injection regimen. A comprehensive review of the literature was conducted according to PRISMA guidelines. PubMed/Medline, Embase, Scopus, and the Cochrane Library were searched from inception to June 2015. All clinical trials that investigated the efficacy of botulinum toxin for chronic anal fissure were selected according to specific criteria. The interventions used were various doses of botulinum toxin. Clinical outcomes, dosage, and injection site data were evaluated with weighted pooled results for each dosage and 95% confidence intervals. There were 1158 patients, with 661 in botulinum toxin treatment arms, from 18 clinical trials included in this review. The outcomes of interest were 3-month healing, incontinence, and recurrence rates. Meta-regression analysis demonstrated a small decrease in healing rate (0.34%; 95% CI, 0-0.68; p = 0.048) with each increase in dosage, a small increase in incontinence rate (1.02 times; 95% CI, 1.0002-1.049; p = 0.048) with each increase in dosage and a small increase in recurrence rate (1.037 times; 95% CI, 1.018-1.057; p = 0.0002) with each increase in dosage. The optimum injection site could not be determined. This study was limited by weaknesses in the underlying evidence, such as variable quality, short follow-up, and a limited range of doses represented. Fissure healing with lower doses of botulinum toxin is as effective as with high doses. Lower doses also reduce the risk of incontinence and recurrence in the long term.

Modelling the migration of contaminants through variably saturated dual-porosity, dual-permeability chalk.

PubMed

Brouyère, Serge

2006-01-10

In the Hesbaye region in Belgium, tracer tests performed in variably saturated fissured chalk rocks presented very contrasting results in terms of transit times, according to artificially controlled water recharge conditions prevailing during the experiments. Under intense recharge conditions, tracers migrated across the partially or fully saturated fissure network, at high velocity in accordance with the high hydraulic conductivity and low effective porosity (fracture porosity). At the same time, a portion of the tracer was temporarily retarded in the almost immobile water located in the matrix. Under natural infiltration conditions, the fissure network remained inactive. Tracers migrated downward through the matrix, at low velocity in relation with the low hydraulic conductivity and the large porosity of the matrix. Based on these observations, Brouyère et al. (2004a) [Brouyère, S., Dassargues, A., Hallet, V., 2004a. Migration of contaminants through the unsaturated zone overlying the Hesbaye chalky aquifer in Belgium: a field investigation, J. Contam. Hydrol., 72 (1-4), 135-164, doi: 10.1016/j.conhyd.2003.10.009] proposed a conceptual model in order to explain the migration of solutes in variably saturated, dual-porosity, dual-permeability chalk. Here, mathematical and numerical modelling of tracer and contaminant migration in variably saturated fissured chalk is presented, considering the aforementioned conceptual model. A new mathematical formulation is proposed to represent the unsaturated properties of the fissured chalk in a more dynamic and appropriate way. At the same time, the rock water content is partitioned between mobile and immobile water phases, as a function of the water saturation of the chalk rock. The groundwater flow and contaminant transport in the variably saturated chalk is solved using the control volume finite element method. Modelling the field tracer experiments performed in the variably saturated chalk shows the adequacy and usefulness of the new conceptual, mathematical and numerical model.

Influence of platform design of six different drug-eluting stents in provisional coronary bifurcation stenting by rePOT sequence: a comparative bench analysis.

PubMed

Derimay, François; Souteyrand, Geraud; Motreff, Pascal; Rioufol, Gilles; Finet, Gerard

2017-10-13

The rePOT (proximal optimisation technique) sequence proved significantly more effective than final kissing balloon (FKB) with two drug-eluting stents (DES) in a bench test. We sought to validate efficacy experimentally in a large range of latest-generation DES. On left main fractal coronary bifurcation bench models, five samples of each of the six main latest-generation DES (Coroflex ISAR, Orsiro, Promus PREMIER, Resolute Integrity, Ultimaster, XIENCE Xpedition) were implanted on rePOT (initial POT, side branch inflation, final POT). Proximal elliptical ratio, side branch obstruction (SBO), stent overstretch and strut malapposition were quantified on 2D and 3D OCT. Results were compared to FKB with Promus PREMIER. Whatever the design, rePOT maintained vessel circularity compared to FKB: elliptical ratio, 1.02±0.01 to 1.04±0.01 vs. 1.26±0.02 (p<0.05). Global strut malapposition was much lower: 2.6±1.4% to 0.1±0.2% vs. 40.4±8.4% for FKB (p<0.05). However, only Promus PREMIER and XIENCE Xpedition achieved significantly less SBO: respectively, 5.6±3.5% and 10.0±5.3% vs. 23.5±5.7% for FKB (p<0.05). Platform design differences had little influence on the excellent results of rePOT versus FKB. RePOT optimised strut apposition without proximal elliptical deformation in the six main latest-generation DES. Thickness and design characteristics seemed relevant for optimising SBO.

Snap-through instability analysis of dielectric elastomers with consideration of chain entanglements

NASA Astrophysics Data System (ADS)

Zhu, Jiakun; Luo, Jun; Xiao, Zhongmin

2018-06-01

It is widely recognized that the extension limit of polymer chains has a significant effect on the snap-through instability of dielectric elastomers (DEs). The snap-through instability performance of DEs has been extensively studied by two limited-stretch models, i.e., the eight-chain model and Gent model. However, the real polymer networks usually have many entanglements due to the impenetrability of the network chains as well as a finite extensibility resulting from the full stretching of the polymer chains. The effects of entanglements on the snap-through instability of DEs cannot be captured by the previous two limited-stretch models. In this paper, the nonaffine model proposed by Davidson and Goulbourne is adopted to characterize the influence of entanglements and extension limit of the polymer chains. It is demonstrated that the nonaffine model is almost identical to the eight-chain model and is close to the Gent model if we ignore the effects of chain entanglements and adopt the affine assumption. The suitability of the nonaffine model to characterize the mechanical behavior of elastomers is validated by fitting the experimental results reported in the open literature. After that, the snap-through stability performance of an ideal DE membrane under equal-biaxial prestretches is studied with the nonaffine model. It is revealed that besides the prestretch and chain extension limit, the chain entanglements can markedly influence the snap-through instability and the path to failure of DEs. These results provide a more comprehensive understanding on the snap-through instability of a DE and may be helpful to guide the design of DE devices.

Methodologies nouvelles pour la realisation d'essais dans la soufflerie Price-Paidoussis

NASA Astrophysics Data System (ADS)

Flores Salinas, Manuel

Le present memoire en genie de la production automatisee vise a decrire le travail effectue dans la soufflerie Price-Paidoussis du laboratoire LARCASE pour trouver les methodologies experimentales et les procedures de tests, qui seront utilisees avec les modeles d'ailes actuellement au laboratoire. Les methodologies et procedures presentees ici vont permettre de preparer les tests en soufflerie du projet MDO-505 Architectures et technologies deformables pour l'amelioration des performances des ailes, qui se derouleront durant l'annee 2015. D'abord, un bref historique des souffleries subsoniques sera fait. Les differentes sections de la soufflerie Price-Paidoussis seront decrites en mettant l'emphase sur leur influence dans la qualite de l'ecoulement qui se retrouve dans la chambre d'essai. Ensuite, une introduction a la pression, a sa mesure lors de tests en soufflerie et les instruments utilises pour les tests en soufflerie au laboratoire LARCASE sera presente, en particulier le capteur piezoelectrique XCQ-062. Une attention particuliere sera portee au mode de fonctionnement, a son installation, a la mesure et a la detection des frequences et aux sources d'erreurs lorsqu'on utilise des capteurs de haute precision comme la serie XCQ-062 du fournisseur Kulite. Finalement, les procedures et les methodologies elaborees pour les tests dans la soufflerie Price-Paidoussis seront utilisees sur quatre types d'ailes differentes. L'article New methodology for wind tunnel calibration using neural networks - EGD approch portant sur une nouvelle facon de predire les caracteristiques de l'ecoulement a l'interieur de la soufflerie Price-Paidoussis se trouve dans l'annexe 2 de ce document. Cet article porte sur la creation d'un reseau de neurones multicouche et sur l'entrainement des neurones, Ensuite, une comparaison des resultats du reseau de neurones a ete fait avec des valeurs simules avec le logiciel Fluent.

Cracks in a Debris Apron

NASA Image and Video Library

2015-03-11

This observation from NASA Mars Reconnaissance Orbiter shows the nature of large fissures in a smooth apron around a mound in the Phlegra region. The apron could be (or could have been) ice-rich, so one possibility is that the fissures are related to ice loss. Based on radar data from MRO combined with studies of the region's geology from other orbiters, scientists think that extensive glaciers covered this region several hundred million years ago. http://photojournal.jpl.nasa.gov/catalog/PIA19307

Étude par détection de photons des processus électroniques au sein d'une jonction tunnel dans un milieu moléculaire

NASA Astrophysics Data System (ADS)

Perronet, K.

2005-03-01

Analysis of the luminescence induced by a STM (scanning tunneling microscope) permits to get insights into the electronic processes taking place in a single nanoscopic tunnel junction. We studied a Au(111)/Au junction under vacuum (UHV) and immersed in a molecular medium. The study under UHV reveals the influence of spatial variations of surface local density of states (LDOS) on the luminescence. The emission at the solid-liquid interface is characterized and the role played by the dielectric function is shown. Time correlations between the emitted single photons are then studied. Depending on the liquid immersing the junction, a photon bunching can occur. We link this bunching with structural changes of the junction induced by the presence of a diffusing molecule. If the HOMO LUMO gap of the molecule is small enough, resonant tunnelling paths exist and tunnelling-electron bunching occurs. Finally, the influence of a self-assembled monolayer on the substrate is investigated. Boundings between triphenylene derivatives and Au(111) are too weak, but with chemisorbed alcanethiols, molecular resolution is reached both on the STM image and on the photon map. We show that the contrast on photon map comes from the modulation of the LDOS spatial extension into the barrier due to the S Au bond. The elaboration of organic multilayers is considered as a route for observing the electroluminescence of a single molecule, isolated from the substrate by thiols and to study correlations of electronic origin. We have already optically characterised such a layer using C{60}. La luminescence induite par STM (microscopie à effet tunnel) est une source d'informations d'une grande richesse sur les processus électroniques au sein d'un objet nanoscopique individuel. Nous nous sommes intéressés à une jonction Au/Au(111) sous vide puis dans un milieu moléculaire. L'étude sous vide a permis de montrer l'influence des variations spatiales des densités d'états de la surface. L'émission à l'interface liquide-solide a été démontrée et le rôle de la fonction diélectrique du solvant mis en évidence. Nous avons ensuite étudié les corrélations temporelles entre les photons émis. Selon le liquide environnant la jonction, les photons peuvent être émis par paquets. Nous relions ce phénomène à la modification structurelle de la jonction induite par la présence d'une molécule et à la différence d'énergie entre ses orbitales frontières. Si elle est assez faible, des chemins tunnel résonants existent et les électrons traversent la barrière par paquets. L'influence d'une couche auto-assemblée sur le substrat est étudiée. Des dérivés de triphénylènes interagissent trop faiblement avec Au(111), mais avec des alcanethiols chimisorbés, la résolution moléculaire est atteinte simultanément sur l'image STM et la carte de photons. Nous montrons que le contraste sur cette dernière provient de la modulation de l'extension spatiale à l'intérieur de la barrière des densités d'état locales due à la liaison S Au. L'élaboration de multicouches organiques est alors envisagée pour observer l'électroluminescence d'une molécule unique, isolée du substrat par les thiols et étudier des corrélations d'origine électronique. Nous avons déjà caractérisé optiquement une telle couche de C{60}.

Effets du stress familial lié au diabète sur le contrôle glycémique chez les jeunes diabétiques de type 1

PubMed Central

Tsiouli, Elina; Alexopoulos, Evangelos C.; Stefanaki, Charikleia; Darviri, Christina; Chrousos, George P.

2013-01-01

Objectif Examiner la façon dont le stress familial influence le contrôle glycémique chez les patients diabétiques de moins de 18 ans. Sources des données Une recherche des études pertinentes publiées depuis 1990 a été réalisée dans PubMed et Scopus à l'aide des mots-clés suivants en anglais: diabetes type 1, glycemic control, family stress, family conflict et family function. Sélection des études La recension initiale a permis de cerner un total de 1 478 articles. La synthèse finale portrait sur 6 études de cohortes, 3 études transversales et 1 étude qualitative dans lesquelles le stress familial était évalué à l'aide d'instruments de mesure des conflits spécifiquement reliés au diabète et le contrôle glycémique était mesuré en fonction de l'hémoglobine glycosylée. Synthèse Dans la plupart des études, il existait une corrélation négative entre le stress familial et le contrôle glycémique des patients. Le bon fonctionnement familial était fortement relié à un bon contrôle glycémique des patients, tandis que les conflits familiaux étaient associés à un mauvais contrôle glycémique. Les familles dont la situation socioéconomique était défavorisée, celles ayant des adolescents atteints de diabète et les familles monoparentales étaient plus enclines à vivre un stress relié au diabète et étaient, par conséquent, plus susceptibles de connaître un moins bon contrôle glycémique. Conclusion Les interventions psychologiques thérapeutiques et les programmes éducatifs peuvent aider à atténuer le stress familial relié au diabète et amélioreront probablement le contrôle glycémique.

Evaluation des prescriptions antibiotiques au service des urgences de l’Hôpital Militaire d’Instruction Mohammed V (HMIMV)

PubMed Central

Elbouti, Anass; Rafai, Mostafa; Chouaib, Naoufal; Jidane, Said; Belkouch, Ahmed; Bakkali, Hicham; Belyamani, Lahcen

2016-01-01

Cette étude à pour objectifs de décrire les pratiques des prescriptions, évaluer leur pertinence et leur conformité aux règles d’utilisations et étudier les facteurs susceptibles de les influencer. Il s’agit d’une étude transversale d’évaluation des prescriptions antibiotiques portant sur 105 patients réalisée au service des urgences médico-chirurgicales de l’H.M.I.Med V de Rabat sur une période d’un mois. Le recueil des données était fait à l’aide d’un questionnaire rapportant les données démographiques et anamnestiques, les antécédents, la notion d’allergie, les données spécifiques de l’examen clinique, les données para cliniques, la prescription détaillée de l’antibiotique. Les données récoltées ont été ensuite évaluées par un médecin référent, chargé d’indiquer les éventuelles erreurs de traitement. Parmi les infections ayant motivé la prescription des antibiotiques, les affections des systèmes respiratoires et urinaires étaient au premier rang, les familles d’antibiotiques les plus couramment employées sont les pénicillines, les quinolones et les céphalosporines. 74 prescriptions soit (70,5%) étaient à la fois pertinentes et conformes contre 9 prescriptions soit (8,6%) justifiées mais non pertinentes et 6 prescriptions soit (5,7%) étaient jugées injustifiées par le médecin référent par absence d’infection. Les évaluations des pratiques médicales sont rarement menées dans les établissements de santé; c’est dans ce cadre que nous avons voulu nous inscrire en produisant cette étude afin d’améliorer la pertinence de nos prescriptions antibiotiques et d’optimiser leur conformité aux différentes recommandations. PMID:28292124

Proprietes ionochromes et photochromes de derives du polythiophene

NASA Astrophysics Data System (ADS)

Levesque, Isabelle

La synthese et la caracterisation de derives regioreguliers du polythiophene ont ete effectuees en solution et sur des films minces. La spectroscopie UV-visible de ces derives a permis de constater qu'ils peuvent posseder des proprietes chromiques particulieres selon le stimulus auquel ils sont soumis. Par exemple, une augmentation de la temperature permet en effet aux polymeres de passer d'une couleur violette a jaune, et ce, a l'etat solide aussi bien qu'en solution. Ces proprietes chromiques semblent regies par une transition conformationnelle (plane a non-plane) de la chaine principale. Ce travail avait pour but de mieux comprendre l'influence de l'organisation des chaines laterales sur les transitions chromiques. Deux derives synthetises possedant des chaines laterales sensibles aux cations alcalins se sont averes etre ionochromes en plus d'etre thermochromes. Il s'agit d'un polymere comportant des chaines laterales de type oligo(oxyethylene) et d'un autre comportant un groupement ether couronne specifique aux ions lithium. Les effets chromiques observes sont expliques par des interactions non-covalentes des cations avec les atomes d'oxygene des chaines laterales dans le cas du premier polymere, et par l'insertion de l'ion Li + dans la cavite de l'ether couronne dans le cas du second polymere. Ces interactions semblent provoquer une diminution de l'organisation induisant ainsi une torsion de la chaine principale. Les deux polymeres semblent specifiques a certains cations et pourraient donc servir comme detecteurs optiques. La specificite aux ions Li+ du second polymere pourrait aussi permettre la conduction ionique, en plus de la conductivite electronique caracteristique des polythiophenes, ce qui pourrait s'averer utile dans le cas de batteries legeres entierement faites de polymeres et de sels de lithium. D'autres derives comportant des chaines laterales de type azobenzene se sont averes etre photochromes en plus d'etre thermochromes. Le groupement lateral a la possibilite de changer de configuration de la forme trans a la forme cis lorsqu'il est soumis a une irradiation dans le domaine de l'ultraviolet ce qui provoque, selon toute evidence, un effet marque sur l'organisation des chaines laterales. Cela induit alors une torsion de la chaine principale thiophene entrainant une diminution de conjugaison marquee. Ces effets peuvent etre exploites entre autres dans l'ecriture optique. Il s'est avere que le polymere irradie peu conjugue peut etre force a retourner a son etat initial conjugue tres rapidement par un traitement electrochimique simple. En conclusion, on a pu prouver qu'une modification dans l'organisation des chaines laterales par un stimulus exterieur affecte considerablement la conformation de la chaine principale. Cela porte a croire que les chaines laterales stabilisent une conformation particuliere des polythiophenes.

Correction partielle des Effets de la Turbulence atmosphérique en Interférométrie optique: Traitement des Données et Développement d'Optiques adaptatives pour l'Interféromètre GI2T

NASA Astrophysics Data System (ADS)

Vérinaud, Christophe

2000-11-01

Dans le domaine de la haute résolution angulaire en astronomie, les techniques de l'interférométrie optique et de l'optique adaptative sont en plein essor. La principale limitation de l'interférométrie est laturbulence atmosphérique qui entraîne des pertes de cohérence importantes, préjudiciables à la sensibilité et à la précision des mesures. L'optique adaptative appliquée à l'interférométrie va permettre un gain en sensibilité considérable. Le but de cette thèse est l'étude de l'influence de l'optique adaptative sur les mesures interférométriques et son application au Grand Interféromètre à DeuxTélescopes (GI2T) situé sur le Mont Calern dans le sud de la France. Deux problèmes principaux sont étudiés de manière théorique par des développements analytiques et des simulations numériques: le premier est le contrôle en temps réel de la variation des différences de marche optique, encore appelée piston différentiel, induite par l'optique adaptative ; le deuxième problème important est la calibration des mesures de contraste des franges dans le cas de la correction partielle. Je limite mon étude au cas d'un interféromètre multi-modes en courtes poses, mode de fonctionnement principal du GI2T également prévu sur le Very Large Telescope Interferometer installé au Cerro Paranal au Chili. Je développe une méthode de calibration des pertes de cohérence spatio-temporelles connaissant la fonction de structure des fronts d'onde corrigés. Je montre en particulier qu'il est possible d'estimer fréquence par fréquence la densité spectrale des images en courtes poses, méthode très utile pour augmenter la couverture du plan des fréquences spatiales dans l'observation d'objets étendus. La dernière partie de ce mémoire est consacrée au développements instrumentaux auxquels j'ai participé. J'ai développé un banc de qualification du système d'optique adaptative à courbure destiné au GI2T et j'ai étudié l'implantation optique de deux systèmes dans la table de recombinaison.

Mise en oeuvre et caracterisation de pieces autotrempantes elaborees avec de nouveaux alliages meres

NASA Astrophysics Data System (ADS)

Bouchemit, Arslane Abdelkader

: L'autotrempabilite des aciers en metallurgie des poudres (MP) permet d'obtenir des pieces ayant une microstructure de trempe (martensite et/ou bainite), et ce, directement lors du refroidissement a la sortie du four de frittage (frittage industriel : 10 45 °C/min [550 a 350 °C]). Cela permet entre autres d'eliminer les traitements thermiques d'austenisation et de trempe (a l'eau : ≈ 2700 °C/min ou a l'huile : ≈ 1100 °C/min [550 a 350 °C] [17]) generalement requis apres le frittage afin d'obtenir une microstructure martensitique. Ainsi, le procede de fabrication est simplifie, moins couteux et la distorsion des pieces due au refroidissement rapide lors de la trempe est evitee. De plus, l'utilisation des bains d'huile est eliminee ce qui rend le procede plus securitaire et ecologique. Les principaux parametres commandant l'autotrempabilite sont : le taux de refroidissement et la composition chimique de l'acier. De nos jours, les systemes de refroidissement a convection forcee combines aux fours industriels permettent d'obtenir des taux de refroidissement eleves a la sortie des fours (60 300 °C/min [550 a 350 °C]) [18, 19]. De plus, le taux de refroidissement critique induisant la formation de la structure de trempe est largement influence par la composition chimique de l'acier. Ainsi, plus l'acier est allie (jusqu'a une certaine limite), plus ce taux de refroidissement critique est moindre. Le molybdene, le nickel et le cuivre sont les elements usuellement utilises en MP. Cependant, le manganese et le chrome sont moins couteux et ont un impact plus marque sur l'autotrempabilite, malgre cela, ils sont rarement utilises a cause de leur susceptibilite a l'oxydation et la degradation de la compressibilite causee par le manganese. L'objectif principal de ce projet est de developper des melanges autotrempants en ajoutant des alliages meres (MA : MA1, MA2 et MA4) fortement allies au manganese (5 15 %m) et au chrome (5 15 %m) qui contiennent beaucoup de carbone (≈ 4 %m) developpes par Ian Bailon-Poujol lors de sa maitrise [20]. La haute teneur en carbone de ces alliages meres assure la protection des elements d'alliage susceptibles a l'oxydation durant toutes les etapes du procede : dans le bain liquide lors de la fusion et l'atomisation a l'eau, pendant le broyage ainsi que lors du frittage des pieces contenant ces alliages meres. Precedemment, Ian Bailon-Poujol avait etudie le broyage de certains alliages meres atomises a l'eau et avait amorce le developpement de melanges autotrempants ainsi que des etudes de diffusion des elements d'alliage. Pour ce projet, le developpement des melanges autotrempants a implique l'optimisation de toutes les etapes de la mise en oeuvre afin d'obtenir les meilleures proprietes possibles des melanges avant frittage (ecoulement, resistance a cru...) et apres frittage (durete, microstructure...), et ce, pour des alliages meres atomises a l'eau par Ian Bailon-Poujol ainsi qu'un alliage mere de chimie similaire qui fut atomise au gaz. (Abstract shortened by ProQuest.).

Choroidal fissure acts as an overflow device in cerebrospinal fluid drainage: morphological comparison between idiopathic and secondary normal-pressure hydrocephalus

PubMed Central

Yamada, Shigeki; Ishikawa, Masatsune; Iwamuro, Yasushi; Yamamoto, Kazuo

2016-01-01

To clarify the pathogenesis of two different types of adult-onset normal-pressure hydrocephalus (NPH), we investigated cerebrospinal fluid distribution on the high-field three-dimensional MRI. The subarachnoid spaces in secondary NPH were smaller than those in the controls, whereas those in idiopathic NPH were of similar size to the controls. In idiopathic NPH, however, the basal cistern and Sylvian fissure were enlarged in concurrence with ventricular enlargement towards the z-direction, but the convexity subarachnoid space was severely diminished. In this article, we provide evidence that the key cause of the disproportionate cerebrospinal fluid distribution in idiopathic NPH is the compensatory direct CSF communication between the inferior horn of the lateral ventricles and the ambient cistern at the choroidal fissure. In contrast, all parts of the subarachnoid spaces were equally and severely decreased in secondary NPH. Blockage of CSF drainage from the subarachnoid spaces could cause the omnidirectional ventricular enlargement in secondary NPH. PMID:27941913

[Banana peel: a possible source of infection in the treatment of nipple fissures].

PubMed

Novak, Franz Reis; de Almeida, João Aprígio Guerra; de Souza e Silva, Rosana

2003-01-01

To study the microbiology of banana peel being sold in the city of Rio de Janeiro, in an attempt to determine the possibility that the peel may represent a source of infection for women who use it to treat nipple fissures. The following microorganisms were studied in 20 banana peel samples: mesophiles, total coliforms, fecal coliforms, Pseudomonas aeruginosa, lipolytic and proteolytic microorganisms, molds and yeasts, lactic bacteria, and coagulase-positive staphylococcus. The microbiological analyses revealed the occurrence of several typical groups of microorganisms, with the following distribution of positive results being detected in banana peel samples: mesophiles, 100%; total coliforms, 20%; coagulase-positive staphylococcus, 25%; molds and yeasts, 30%; proteolytic microorganisms, 70%; lipolytic microorganisms, 30%, and lactic bacteria, 95%. Fecal coliforms and Pseudomonas aeruginosa were not isolated. The results show the presence of potentially pathogenic microorganisms in levels which could compromise the microbiological quality of the banana peel. Its use for the treatment of nipple fissures can initiate an infectious process.

Can prevention eliminate caries?

PubMed

O'Mullane, D

1995-07-01

There are four main factors involved in the carious process: at-risk tooth structure, plaque flora, fermentable carbohydrates, and time. Based on our knowledge of the carious process, four main preventive strategies have been developed over the years, namely, fluorides, fissure sealing, dietary choice, and plaque control. Fluorides are having a major impact on smooth-surface caries; hence, strategies combining fluorides and fissure sealing are very effective. However, use of fissure sealing is still problematic. Changing dietary practices with a view to reducing dental caries seems to be having little impact on a global scale. Plaque control, as practiced routinely by the majority of people, is not sufficient to result in caries reductions. Deprivation and poverty are strongly associated with high caries levels. Although the preventive strategies currently available are likely to result in lower caries levels for many, for logistical reasons and because of factors associated with deprivation and poverty, caries is likely to remain a major public health problem in most communities for the foreseeable future.

Assessing the atmospheric and climatic effects of basaltic fissure eruptions. A case study Nornahraun, North Iceland, 2014-2015.

NASA Astrophysics Data System (ADS)

Gallagher, Catherine; Burton, Kevin; Thordarson, Thorvaldur; Vye-Brown, Charlotte; Brown, Richard

2015-04-01

A volcanic eruption's ability to release sulphur gases into the atmosphere is one of the critical factors in assessing their climatic and environmental effects, because it is directly linked to the potential H2SO4 aerosol burden produced [1]. Basaltic fissure eruptions loft large amounts of sulphur into the atmosphere because of the efficient degassing of volatiles and halogens from the magma at the vent [2-4] coupled with the high sulphur yield of basaltic magma. The common nature of this style of eruption and its products, regardless of magnitude, means that our understanding of the exact processes which influence atmospheric chemistry and environmental impact is very important. The Nornahraun fissure eruption in North Iceland that began on the 31st August 2014, has quickly become one of the best documented eruptions of its kind, through systematic monitoring and sampling by the Institute of Earth Sciences eruption team and The Icelandic Meteorological Office. As a result it is an excellent modern analogue for historic or ancient basaltic fissure eruptions, for which the amount of degassing can only be estimated through petrological and geochemical methods. It also serves as a timely testing platform for novel geochemical proxies. This study uses the exceptional sensitivity of the 187Os-187Re radiogenic system to the presence of crustal material [5], and highly siderophile stable isotopes Cu, Zn and S to indicate the chemistry and degassing of the melt carrying S to the surface. The geochemical isotopic proxies will be tested using established petrological methods and gas emission data. This study concentrates on determining the following key parameters: (1) The source of volatiles in the magma indicated though the pressure dependence of S solubility. (2) The mechanism of aerosol and gas release into the atmosphere is dictated both by the chemistry of the melt that controls the S species (H2S, SO2 or FeS2) present [6], and by the mechanism of transfer. (3) The amount of volatiles released during a basaltic fissure eruption both at the vent (>70%) as well as during lava transport [2-4]. This uses the petrological method of Devine et al (1984) and a two-stage degassing model [3] to establish the total S budget. (4) The duration of atmospheric loading of volatiles in an eruption, which affects the residence time of these gases and aerosols. The Nornahraun event provides the opportunity to verify the gas species and aerosols present in the atmosphere. By utilising the very well documented Nornahraun eruption, better constraints can be obtained on the atmospheric effects of well-known historical eruptions such as Laki 1783-84. Scaling up of such models to large flood basalt eruptions may shed light on their climatic effects and postulated association with major mass extinctions. [1] Thordarson, T. et al. Geol. Soc. London. Spec. Publ. 213 (2003), 103-121. [2] Guilbaud, M.-N. et al. Journal of Petrology 48.(2007), 1265-1294. [3] Thordarson, T. et al. Bulletin of Volcanology 58.(1996), 205-225. [4] Metrich, N. et al. Contrib Mineraology Petrol 107.(1991), 435-447. [5]Gannoun, A. et al. Science 303.(2004),70-72. [6] Burgisser, A., Scaillet, B. Nature 445.(2007), 194-197.

Effect of tension and curvature on the chemical potential of lipids in lipid aggregates.

PubMed

Grafmüller, Andrea; Lipowsky, Reinhard; Knecht, Volker

2013-01-21

Understanding the factors that influence the free energy of lipids in bilayer membranes is an essential step toward understanding exchange processes of lipids between membranes. In general, both lipid composition and membrane geometry can affect lipid exchange rates between bilayer membranes. Here, the free energy change ΔG(des) for the desorption of dipalmitoyl-phosphatidylcholine (DPPC) lipids from different lipid aggregates has been computed using molecular dynamics simulations and umbrella sampling. The value of ΔG(des) is found to depend strongly on the local properties of the aggregate, in that both tension and curvature lead to an increase in ΔG(des). A detailed analysis shows that the increased desorption free energy for tense bilayers arises from the increased conformational entropy of the lipid tails, which reduces the favorable component -TΔS(L) of the desorption free energy.

Underwater Ambient Noise. Proceedings of a Conference Held at SACLANTCEN on 11-14 May 1982. Volume 2. Unclassified Papers. Part 1

DTIC Science & Technology

1982-06-15

tiers d’octave, le nombre de mesures de bruit etait limite a trois . On a prefere etudier 1’influence de 1’immersion avec des hydrophones om...bateaux presents dans le secteur . Un minimum serait la reproduction d’un scope radar donnant le nombre et les positions des bruiteurs. Rien d’em...d’environnement pour la pluie, le vent, 1’interception radar (fig.2). 5.2. Ligne sous-marine (fig.3) . Les trois hydrophones et le reseau de

Effect of the Galapagos Hotspot on Seamount Formation along the Galapagos Spreading Center

NASA Astrophysics Data System (ADS)

Behn, M. D.; Sinton, J. M.; Detrick, R. S.

2002-12-01

Studies along the Mid-Atlantic Ridge (MAR) and East Pacific Rise (EPR) have shown seamount formation to be a strong function of spreading rate. At the MAR, seamounts are a dominant morphologic feature of the inner valley floor, while at the EPR seamounts are rarely observed within the neovolcanic zone. The Galapagos Spreading Center (GSC) provides an excellent location to test the influence of a hotspot on the process of seamount generation at a relatively constant spreading rate. In this study we use multi-beam bathymetry data acquired during the G-PRIME cruise in April-May, 2000 to examine the distribution of axial seamounts along the GSC with distance from the hotspot. We use a numerical algorithm to identify isolated volcanic edifices, by searching bathymetry for closed, concentric contours protruding above the surrounding seafloor. Seamount populations are fit with a maximum likelihood model to estimate the total number of seamounts per unit area, ν o, and the characteristic seamount height, β-1. The number of seamounts in the axial zone decreases significantly as the Galapagos hotspot is approached, suggesting a change from dominantly point-source to fissure-fed volcanism as magma supply increases. West of the 95.5°W propagator, the total number of seamounts per unit area (ν o = 279+/-16 per 103 km2) is similar to values observed at the MAR. In comparison, east of 92.7°W, where magma supply is higher, seamount density (50+/-9 per 103 km2) is similar to observations at the fast-spreading EPR. Our results show that the transition from point-source to fissure-fed eruptions occurs gradually, in contrast to the "threshold" effect observed in axial magma chamber depth and axial morphology in which small changes in magma supply result in large changes in these variables. In summary, the western GSC displays the same range in seamount density observed along the global mid-ocean ridge system suggesting that both spreading rate and magma supply are important factors controlling the style of constructional volcanism (point source vs fissure fed eruptions) at oceanic spreading centers.

Surface Water Qualit: Revisiting Nitrate Concentrations in the Des Moines River: 1945 and 1976-2001

USGS Publications Warehouse

McIsaac, G.F.; Libra, R.D.

2003-01-01

Recent compilations of historical and contemporary riverine nitrate (NO3) concentrations indicate that concentrations in many rivers in the north-central USA increased during the second half of the 20th century. The Des Moines River near Des Moines, Iowa, however, was reported to have had similar NO3 concentrations in 1945 and the 1980s, in spite of substantially greater N input to the watershed during the latter period. The objective of this study was to reconsider the comparison of historical and contemporary NO3 concentrations in the Des Moines River near Des Moines in light of the following: (i) possible errors in the historical data used, (ii) variations in methods of sample collection, (iii) variations in location of sampling, and (iv) additional data collected since 1990. We discovered that an earlier study had compared the flow-weighted average concentration in 1945 to arithmetic annual average concentrations in the 1980s. The intertemporal comparison also appeared to be influenced by differences in sample collection methods and locations used at different times. Depending on the model used and the estimated effects of composite sample collection, the 1945 arithmetic average NO3 concentration was between 44 and 57% of the expected mean value at a similar water yield during 1976-2001. The flow-weighted average NO3 concentration for 1945 was between 54 and 73% of the expected mean value at a similar water yield during 1976-2001. The difference between NO3 concentrations in 1945 and the contemporary period are larger than previously reported for the Des Moines River.

Magnetic graphene oxide modified with choline chloride-based deep eutectic solvent for the solid-phase extraction of protein.

PubMed

Huang, Yanhua; Wang, Yuzhi; Pan, Qi; Wang, Ying; Ding, Xueqin; Xu, Kaijia; Li, Na; Wen, Qian

2015-06-02

Four kinds of green deep eutectic solvents (DESs) based on choline chloride (ChCl) have been synthesized and coated on the surface of magnetic graphene oxide (Fe3O4@GO) to form Fe3O4@GO-DES for the magnetic solid-phase extraction of protein. X-ray diffraction (XRD), vibrating sample magnetometer (VSM), Fourier transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FESEM) and thermal gravimetric analysis (TGA) were employed to characterize Fe3O4@GO-DES, and the results indicated the successful preparation of Fe3O4@GO-DES. The UV-vis spectrophotometer was used to measure the concentration of protein after extraction. Single factor experiments proved that the extraction amount was influenced by the types of DESs, solution temperature, solution ionic strength, extraction time, protein concentration and the amount of Fe3O4@GO-DES. Comparison of Fe3O4@GO and Fe3O4@GO-DES was carried out by extracting bovine serum albumin, ovalbumin, bovine hemoglobin and lysozyme. The experimental results showed that the proposed Fe3O4@GO-DES performs better than Fe3O4@GO in the extraction of acidic protein. Desorption of protein was carried out by eluting the solid extractant with 0.005 mol L(-1) Na2HPO4 contained 1 mol L(-1) NaCl. The obtained elution efficiency was about 90.9%. Attributed to the convenient magnetic separation, the solid extractant could be easily recycled. Copyright © 2015 Elsevier B.V. All rights reserved.

Life History and Risk of Death after 50: A Survival Analysis for Europe.

PubMed

Nicińska, Anna; Kalbarczyk-Stęclik, Małgorzata

2015-12-01

RÉSUMÉ Dans notre étude nous avons examiné l'influence des événements du passé des individus sur le risque de décès des Européens âgés de plus de 50 ans, en contrôlant autres variables pertinentes. Notre analyse était basée sur les données d'entretiens biographiques rétrospectifs, les données d'entretiens réguliers au suivi longitudinal et celles d'entretiens de fin de vie de l'Enquête européenne SHARE sur la santé, le vieillissement et la retraite en Europe. En particulier, nous relevons l'état de santé auto-déclaré pendant l'enfance; les périodes de pauvreté, de faim et de mauvaise santé éprouvées dans le passé; et aussi l'histoire des soins de santé, y compris les soins dentaires, les analyses de sang et les mesures de pression artérielle. Ces informations, avec l'age, le sexe, l'état de santé subjectif et objectif, et d'autres facteurs socio-démographiques, permettent d'expliquer le risque de décès. L'analyse de survie, en contrôlant des variables pertinentes, montre que les événements du passé ont un impact significatif sur le risque de décès des Européens âgés de plus de 50 ans.

Double-porosity models for a fissured groundwater reservoir with fracture skin

USGS Publications Warehouse

Moench, Allen F.

1984-01-01

Theories of flow to a well in a double-porosity groundwater reservoir are modified to incorporate effects of a thin layer of low-permeability material or fracture skin that may be present at fracture-block interfaces as a result of mineral deposition or alteration. The commonly used theory for flow in double- porosity formations that is based upon the assumption of pseudo–steady state block-to-fissure flow is shown to be a special case of the theory presented in this paper. The latter is based on the assumption of transient block-to-fissure flow with fracture skin. Under conditions where fracture skin has a hydraulic conductivity that is less than that of the matrix rock, it may be assumed to impede the interchange of fluid between the fissures and blocks. Resistance to flow at fracture-block interfaces tends to reduce spatial variation of hydraulic head gradients within the blocks. This provides theoretical justification for neglecting the divergence of flow in the blocks as required by the pseudo–steady state flow model. Coupled boundary value problems for flow to a well discharging at a constant rate were solved in the Laplace domain. Both slab-shaped and sphere-shaped blocks were considered, as were effects of well bore storage and well bore skin. Results obtained by numerical inversion were used to construct dimensionless-type curves that were applied to well test data, for a pumped well and for an observation well, from the fractured volcanic rock terrane of the Nevada Test Site.

Transport de Particules et Atmospheres D'etoiles Magnetiques

NASA Astrophysics Data System (ADS)

LeBlanc, Francis

1995-01-01

Les phenomenes relies a la diffusion atomique dans les etoiles sont etudies de facon intensive depuis environ un quart de siecle. La diffusion peut a la fois modifier les abondances atomiques presentes ainsi qu'affecter la structure et l'evolution stellaires. Dans cette these, nous allons etudier trois phenomenes physiques relies a la diffusion. Nous avons developpe la theorie de la derive induite par la radiation afin qu'elle soit facilement applicable dans le contexte de l'astrophysique stellaire. Des calcuis detailles furent effectues afin d'evaluer l'importance de cet effet sur la diffusion relative de l'^3 He et l'^4He et montrent que la derive induite par la radiation accelere la separation de ces deux isotopes dans une etoile de temperature effective de 18000 K. Lorsque l'^4He est present, ce phenomene augmente la vitesse de derive de l'^3He qui migre vers l'exterieur ce qui fait apparai tre la surabondance de cet isotope plus tot dans l'evolution. Des calculs sur le lithium a la base de la zone convective d'une etoile avec une temperature effective de 6700 K monuent que la derive induite par la radiation n'est pas importante dans ce cas. Ce phenomene semble aussi etre negligeable pour l'oxygene dans les etoiles de type A ainsi que pour le mercure dans les etoiles de type B. Deuxiemement nous avons construit des modeles d'atmospheres d'etoiles ayant un champ magnetique horizontal et constant en incluant l'interaction entre ce champ et la diffusion ambipolaire de l'hydrogene. Cette interaction cause une compression de la zone d'ionisation de l'hydrogene. Dans un modele de temperature effective de 10,000 K, et avec log g = 4.0 la gravite effective, c'est-a-dire la gravite plus l'acceleration causee par la force de Lorentz, en presence d'un champ magnetique de 5 kG est sept fois plus grande que la gravite. Ce phenomene affecte donc fortement la structure des etoiles Ap. Cette modification de la structure des etoiles magnetiques cause un plus grand elargissement des raies de Balmer de l'hydrogene. Puisque le champ magnetique observe n'est pas uniforme a la surface des etoiles Ap, la modification de la structure causee par l'interaction entre la diffusion ambipolaire de l'hydrogene et le champ magnetique engendre une variation de l'elargissement des raies de Balmer durant une periode de rotation. La variation causee par ce phenomene est inferieure aux variations observees. D'autres facteurs tels que des gradients horizontaux et verticaux de la metallicite et de la configuration du champ magnetique peuvent aussi influencer la variation des raies de Balmer. Des ameliorations majeures furent apportees au calcul des accelerations radiatives. Grace a des bases de donnees plus completes, il est maintenant possible de calculer l'acceleration causee par la photoionisation. De plus nous avons calcule de maniere approximative l'opacite monochromatique totale qui est un ingredient essentiel au calcul de l'acceleration radiative. Des ameliorations concernant l'elargissement des raies et la distribution de l'acceleration entre les divers ions d'un element furent aussi incluses. Des calculs detailles de l'acceleration radiative sur le fer montrent qu'une abondance consistente avec les observations peut etre supportee dans les etoiles de type A et F. L'abondance de fer supportee depend de la temperature effective et de la gravite de surface de l'etoile. Les accelerations radiatives ont ete tabulees afin d'etre facilement utilisables dans des codes d'evolution stellaire.

Thermomechanical behavior of mica layers with lenticular fissures

NASA Astrophysics Data System (ADS)

Yang, Michael Xinyi

The thermomechanical behavior of natural phlogopite mica specimens from seven different origins is characterized. An initial heat treatment, to a temperature between 300°C and 400°C, is found to form fissures that stabilize in the material. Following the initial heat treatment, all the phlogopite specimens, regardless of their origin and polytype, exhibit the extraordinarily large thermal expansion (intumescence), more than 200% at 600°C, in the direction perpendicular to the basal planes. This phenomenon is strictly reproducible when tested under a range of thermal conditions including thermal shock, multiple thermal fatigue cycles, varying heating or cooling rates and isothermal heating over an extensive period of time at different temperatures up to 585°C. The hysteresis, associated with the thermal cycle, is increased when the specimen is heated or cooled at a faster rate. The maximum coefficient of linear thermal expansion, approximately 10 -2°C-1, is observed over the temperature range 100--120°C. This is due to the non-structural water, entrapped within the layer structure, which undergoes a phase transition and causes the mica layers to expand abruptly. A model of lenticular fissures is developed based on thin-plate mechanics and thermodynamics assumptions. The state of a lenticular fissure with water vapor molecules is determined to correlate the experimental parameters with the material properties. The average density of water vapor molecules within a lenticular fissure is calculated to be ˜1025 m 3 for the temperature interval between 100°C and 275°C. The concentration of non-structure water, based on the model calculation, is less than 0.1% by weight. Acoustic emission (AE) signals have been reported by Pranevicius et al. (1995) to correspond to the microstructure changes as the internal lenticular fissures develop in phlogopite. This technique has also been proven feasible to characterize the thermomechanical behavior of other layer structures (Pranevicius 1995). Other layer structures are reviewed to determine their potential reversible thermomechanical properties. When phlogopite is used as a model specimen to relate microstructure to intumescence, two criteria are established for selection of the layer structures of potential intumescence. The first is the need for flexible and elastic layers to withstand the strain imposed by large lateral expansion. The second is the requirement of a high degree for intercalation. Possible candidates that fit these two criteria are identified. Finally, a few potential applications of layer structures of intumescence are discussed, and future research in this area is proposed. (Abstract shortened by UMI.)

Imidazole-based deep eutectic solvents for starch dissolution and plasticization.

PubMed

Zdanowicz, Magdalena; Spychaj, Tadeusz; Mąka, Honorata

2016-04-20

Potato starch and high-amylose starch were treated with imidazole-based deep eutectic solvents (DESs) as dissolution and plasticization media. Beside imidazole (IM) for two-component DESs preparation choline chloride (CC), glycerol (G) or carboxylic acids (citric or malic) were used. An influence of water content in starch (as well as an extra water in the starch/DES system) on polymer dissolution and plasticization processes was investigated. Dissolution and gelatinization of starch in DESs were followed via DSC and laser scanning microscopy. A rheometric characteristics revealed an influence of starch/DES system storage time on the plasticization process. The tendency to recrystallization of compression-molded-starch films was evaluated using XRD technique. High dissolution and plasticization effectiveness of CC/IM and G/IM and a low tendency to film retrogradation of thermoplasticized starch were noted. Copyright © 2015 Elsevier Ltd. All rights reserved.

Solutions multiples thermocapillaires en zone flottante à gravité nulle

NASA Astrophysics Data System (ADS)

Chénier, E.; Delcarte, C.; Labrosse, G.

1998-04-01

An original model is adopted to analyse the melted phase hydrodynamics, in the floating zone technique configuration for crystal growth. In particular, a small capillary scale located near the fusion fronts is taken into account. Its size turns out to influence significantly the flow structure. For the first time, multiple solutions are exhibited in zero gravity. Un modèle original a été adopté pour analyser l'hydrodynamique de la phase fondue pour la technique de la zone flottante, en croissance cristalline. En particulier, une petite échelle capillaire, située près des fronts de fusion, est prise en considération. Son extension se révèle influencer significativement la structure des écoulements. L'existence de solutions multiples est, pour la première fois, mise en évidence en gravité zéro.

Statistical model of quiet Sun coronal heating (French Title: Modèle statistique de chauffage de la couronne solaire calme)

NASA Astrophysics Data System (ADS)

Podladchikova, O.

2002-02-01

The high temperature of the solar corona is still a puzzling problem of solar physics. However, the recent observations of satellites SoHO, Yohkoh or TRACE seem to indicate that the processes responsible for the heating of the closed regions are situated in the low corona or in the chromosphere, thus close to the sun surface, and are associated to the direct currents dissipation. Statistical data analysis suggest that the heating mechanisms result thus from numerous events of current layers dissipation of small scale and weak energy, on the resolution limit of modern instruments. We propose a statistical lattice model, resulting from an approach more physical than self-organized criticality, constituted by a magnetic energy source at small scales and by dissipation mechanisms of the currents, which can be associated either to magnetic reconnection or to anomalous resistivity. The various types of sources and mechanisms of dissipation allow to study their influence on the statistical properties of the system, in particular on the energy dissipation. With the aim of quantifying this behavior and allowing detailed comparisons between models and observations, analysis techniques little used in solar physics, such as the singular values decomposition, entropies, or Pearson technique of PDF classification are introduced and applied to the study of the spatial and temporal properties of the model. La température anormalement élevée de la couronne reste un des problèmes majeurs de la physique solaire. Toutefois, les observations récentes des satellites SoHO, Yohkoh ou TRACE semblent indiquer que les processus responsables du chauffage des régions fermées se situent dans la basse couronne ou dans la chromosphère, donc proches de la surface solaire, et sont associés à la dissipation de couches de courant continu. L'analyse statistique de données suggère que les mécanismes de chauffage résulteraient donc de nombreux événements de dissipation de couches de courant de petite échelle et de faible énergie, àla limite de la résolution des instruments modernes. Nous proposons un modèle statistique sur réseau, résultant d'une approche plus physique que la criticalité auto-organisée, constitué d'une source d'énergie magnétique de petite échelle et de mécanismes de dissipation des courants, qui peuvent être associés soit à la reconnection magnétique soit à la résistivité anormale. Les différents types de sources et de mécanismes de dissipation permettent d'étudier leur influence sur les propriétés statistiques du système, en particulier sur l'énergie dissipée. Dans le but de quantifier ces comportements et de permettre des comparaisons approfondies entres les modèles et les observations, des techniques d'analyse peu utilisées en physique solaire, telles que la décomposition en valeurs singulières, des entropies, ou la technique de Pearson de classification des densités de probabilité, sont introduites et appliquées `a l'étude des propriétés spatiales et temporelles du modèle.

Formation des etoiles massives dans les galaxies spirales

NASA Astrophysics Data System (ADS)

Lelievre, Mario

Le but de cette thèse est de décrire la formation des étoiles massives dans les galaxies spirales appartenant à divers types morphologiques. L'imagerie Hα profonde combinée à une robuste méthode d'identification des régions HII ont permis de détecter et de mesurer les propriétés (position, taille, luminosité, taux de formation d'étoiles) de plusieurs régions HII situées dans le disque interne (R < R25) de dix galaxies mais aussi à leur périphérie (R ≥ R 25). De façon générale, la répartition des régions HII ne montre aucune évidence de structure morphologique à R < R25 (bras spiraux, anneau, barre) à moins de limiter l'analyse aux régions HII les plus grosses ou les plus lumineuses. La répartition des régions HII, de même que leur taille et leur luminosité, sont toutefois sujettes à de forts effets de sélection qui dépendent de la distance des galaxies et qu'il faut corriger en ramenant l'échantillon à une résolution spatiale commune. Les fonctions de luminosité montrent que les régions HII les plus brillantes ont tendance à se former dans la portion interne du disque. De plus, l'analyse des pentes révèle une forte corrélation linéaire par rapport au type morphologique. Aucun pic n'est observé dans les fonctions de luminosité à log L-37 qui révèlerait la transition entre les régions HII bornées par l'ionisation et par la densité. Une relation cubique est obtenue entre la taille et la luminosité des régions HII, cette relation variant toutefois de façon significative entre le disque interne et la périphérie d'une même galaxie. La densité et la dynamique du gaz et des étoiles pourraient influencer de façon significative la stabilité des nuages moléculaires face à l'effondrement gravitationnel. D'une part, l'étendue du disque de régions HII pour cinq galaxies de l'échantillon coïncide avec celle de l'hydrogène atomique. D'autre part, en analysant la stabilité des disques galactiques, on conclue qu'en incluant la densité des étoiles vieilles présentes, on arrive à mieux contraindre le rayon à partir duquel aucune formation d'étoiles ne devrait se produire dans les galaxies.

Different definitions of esophagus influence esophageal toxicity prediction for esophageal cancer patients administered simultaneous integrated boost versus standard-dose radiation therapy.

PubMed

Huang, Bao-Tian; Huang, Rui-Hong; Zhang, Wu-Zhe; Lin, Wen; Guo, Long-Jia; Xu, Liang-Yu; Lin, Pei-Xian; Chen, Jian-Zhou; Li, De-Rui; Chen, Chuang-Zhen

2017-03-09

We aim to evaluate whether different definitions of esophagus (DEs) impact on the esophageal toxicity prediction for esophageal cancer (EC) patients administered intensity-modulated radiation therapy with simultaneous integrated boost (SIB-IMRT) vs. standard-dose IMRT (SD-IMRT). The esophagus for 21 patients diagnosed with primary EC were defined in the following four ways: the whole esophagus, including the tumor (ESO whole ); ESO whole within the treatment field (ESO infield ); ESO infield , excluding the tumor (ESO infield-tumor ) and ESO whole , excluding the tumor (ESO whole-tumor ). The difference in the dose variation, acute esophageal toxicity (AET) and late esophageal toxicity (LET) of four DEs were compared. We found that the mean esophageal dose for ESO whole , ESO infield , ESO infield-tumor and ESO whole-tumor were increased by 7.2 Gy, 10.9 Gy, 4.6 Gy and 2.0 Gy, respectively, in the SIB-IMRT plans. Radiobiological models indicated that a grade ≥ 2 AET was 2.9%, 3.1%, 2.2% and 1.6% higher on average with the Kwint model and 14.6%, 13.2%, 7.2% and 3.4% higher with the Wijsman model for the four DEs. A grade ≥ 3 AET increased by 4.3%, 7.2%, 4.2% and 1.2%, respectively. Additionally, the predicted LET increased by 0.15%, 0.39%, 1.2 × 10 -2 % and 1.5 × 10 -3 %. Our study demonstrates that different DEs influence the esophageal toxicity prediction for EC patients administered SIB-IMRT vs. SD-IMRT treatment.

Enceladus: Starting Hydrothermal Activity

NASA Technical Reports Server (NTRS)

Matson, D. L.; Castillo-Rogez, J. C.; Johnson, T. V.; Lunine, J. I.; Davies, A. G.

2011-01-01

We describe a process for starting the hydrothermal activity in Enceladus' South Polar Region. The process takes advantage of fissures that reach the water table, about 1 kilometer below the surface. Filling these fissures with fresh ocean water initiates a flow of water up from an ocean that can be self-sustaining. In this hypothesis the heat to sustain the thermal anomalies and the plumes comes from a slightly warm ocean at depth. The heat is brought to the surface by water that circulates up, through the crust and then returns to the ocean.

Painful ophthalmoplegia secondary to a mucocele involving the sella turcica, superior orbital fissure, and sphenoid sinus.

PubMed

Clarke, H; Clarke, V; Gill, J; St John, A; Lashley, M

1992-03-01

A case of painful ophthalmoplegia associated with an extensive lesion involving the sella turcica, superior orbital fissure, and sphenoid sinus in a 57-year-old man is reported. Even though nasal and ocular symptoms and signs represent the usual features of sphenoidal mucoceles, extension to the intracranial cavity as seen in this lesion is rare. Surgical exploration via a sublabial, transseptal approach revealed a mucocele of the sphenoid sinus. This case exhibited extensive and aggressive behavior simulating a malignant neoplasm.

Simultaneous determination of environmental estrogens: Diethylstilbestrol and estradiol using Cu-BTC frameworks-sensitized electrode.

PubMed

Ji, Liudi; Wang, Yanying; Wu, Kangbing; Zhang, Weikang

2016-10-01

It is quite important to monitor environmental estrogens in a rapid, sensitive, simple and cost-effective manner due to their wide existence and high toxicity. Using 1,3,5-Benzenetricarboxylic acid (H3BTC) as the ligand and copper ions as the center, Cu-BTC frameworks with surface area of 654.6m(2)/g were prepared, and then used to construct a novel electrochemical sensing platform for diethylstilbestrol (DES) and estradiol (E2). On the surface of Cu-BTC frameworks, two oxidation waves at 0.26V and 0.45V are observed for DES and E2, and the oxidation signals are improved greatly. The prepared Cu-BTC frameworks not only enhance the accumulation efficiency of DES and E2, but also improve their electron transfer ability. The influences of pH value, modification amount of Cu-BTC and accumulation time were examined. As a result, a highly-sensitive, rapid and convenient electrochemical method was developed for the simultaneous determination of DES and E2, with detection limit of 2.7nM and 1.1nM. The practical applications manifest this new sensing system is accurate and feasible. Copyright © 2016 Elsevier B.V. All rights reserved.

La fragilité

PubMed Central

Lee, Linda; Heckman, George; Molnar, Frank J.

2015-01-01

Résumé Objectif Aider les médecins de famille à mieux reconnaître la fragilité et ses répercussions sur la prise en charge des patients âgés. Sources des données Une recension a été effectuée dans PubMed-MEDLINE de 1990 à 2013 pour trouver des articles rédigés en anglais exclusivement, à l’aide des groupes suivants de mots clés et d’en-têtes MeSH : frail elderly, frail, frailty; aged, geriatrics, geriatric assessment, health services for the aged; primary health care, community health services et family practice. Message principal La fragilité est fréquente, en particulier chez les personnes âgées atteintes de maladies chroniques complexes comme l’insuffisance cardiaque et la bronchopneumopathie chronique obstructive. De nouvelles données probantes démontrent l’importance de la fragilité comme facteur de prédiction d’issues indésirables chez les personnes plus âgées. Quoiqu’on ne s’entende actuellement pas sur les meilleures façons d’évaluer et de diagnostiquer la fragilité en soins primaires, des marqueurs individuels de la fragilité comme la lenteur de la démarche offrent des moyens pratiques prometteurs de dépister la fragilité. La détection de la fragilité en soins primaires peut offrir la possibilité de retarder la progression de la fragilité au moyen d’interventions proactives comme l’exercice. La reconnaissance de l’existence de la fragilité peut orienter un counseling approprié et la prise de mesures préventives anticipatoires pour les patients lorsqu’on envisage des interventions médicales. Elle peut aussi aider à cerner des problèmes concomitants qui contribuent à la fragilité et l’influencent et à en optimiser la prise en charge. Les recherches futures devraient se pencher sur la détermination de moyens pratiques et efficaces pour évaluer et prendre en charge de manière appropriée ces patients vulnérables au niveau des soins primaires. Conclusion En dépit de son importance, on a accordé peu d’attention au concept de la fragilité en médecine familiale. La fragilité peut aisément passer inaperçue parce que ses manifestations sont souvent subtiles, de progression lente et, par conséquent, elle peut être méprise pour un vieillissement normal. La formation des médecins a insisté sur des maladies médicales spécifiques plutôt que sur la vulnérabilité globale. Pour les médecins en soins primaires, la reconnaissance de la fragilité peut les aider à offrir un counseling approprié aux patients et aux membres de leur famille au sujet des risques des interventions médicales.

Surface fracturing and graben subsidence during the 2014 Bárdarbunga dike intrusion in Iceland

NASA Astrophysics Data System (ADS)

Rut Hjartardóttir, Ásta; Einarsson, Páll; Tumi Gudmundsson, Magnús; Högnadóttir, Thordís

2015-04-01

A dike propagated laterally away from the Bárdarbunga central volcano in August 2014. The dike propagated about 48 km towards the northeast and north-northeast, mostly beneath the Vatnajökull glacier. However, the farthest 8 km of the dike were located north of the glacier, where the ice-free area allowed surface fractures and graben subsidence to be observed. This dike intrusion was accompanied by eruptions, the most prominent ones occurring within the graben at the distal end of the dike. In this study, photographs taken from airplanes were rectified by using the ArcGIS software. This was done in order to map the fractures and eruptive fissures which were formed or reactivated during this dike intrusion, and to show the temporal evolution of the fracture pattern. Ground deformation across the graben was measured from an airplane with a radar altimeter and kinematic GPS. The propagation of the dike was shown by laterally propagating earthquakes and by ground deformation recorded by GPS geodetic network. Three days after the dike had propagated north of the Vatnajökull glacier, new and reactivated fractures were detected in this area, above the dike. The fractures delineated two grabens in direct continuation of each other. The southern graben extended 5 km northwards from the glacier boundary, and was 700-1000 m wide. Before the eruptions, the northern graben was seen ~6.6-7.5 km north of the glacier, and was only 250-450 m wide. Two days later, on the 29th of August, a four-hour long eruption took place on a 600 m long eruptive fissure 6 km north of the glacier. Then, the narrow northern graben was seen extending about 1-1.6 km farther to the south than before the eruption, with the new eruptive fissure in the middle of it. The eruption resumed again two days later, extending the same eruptive fissure towards the south and north, to a total of ~1900 m length. This eruption is still ongoing (in January 2014). On the 5th of September, three short (~100 to 250 m) eruptive fissures also opened up ~3 km north of the glacier, although these eruptions only lasted two days. Notably, the eruptive fissures activated on 29th and 31st August were located within the eruptive fissures of the older Holuhraun lava, which erupted in the 17th and/or 18th century. A profile taken on the 30th December 2014 by radar measurements across the southern graben, 4 km north of the glacier, showed that the graben had then subsided ~4-5 m, compared with a TanDEM-X Digital Elevation Model acquired before the dike intrusion. The width of a graben implies the depth to the top of the dike. The narrow grabens observed before the eruptions thus indicated that the dike was shallow, and that an eruption was likely to occur. The width of active grabens therefore is an important observable in hazard assessment during dike intrusions.

Chronic anal fissure: morphometric analysis of the anal canal at 3.0 Tesla MR imaging.

PubMed

Erden, Ayşe; Peker, Elif; Gençtürk, Zeynep Bıyıklı

2017-02-01

OBJECTıVE: To compare the morphometric data relating to the muscular structures of the anal canal, in patients with chronic anal fissure and in control group, examined at a 3.0 Tesla MR system. Forty-seven consecutive patients with chronic anal fissure and randomly selected 40 patients who had no claims for perianal disease during their life time were included in the study. T2-weighted sagittal, high-resolution (HR) T2-weighted, and contrast-enhanced fat-suppressed T1-weighted oblique axial and oblique coronal images were retrospectively analyzed by two observers in consensus. Thickness of sphincteric muscles, anal canal length, anorectal angle, thickness of anococcygeal ligament, depth of Minor triangle, width between subcutaneous sphincters, vascularity of posterior commissure, visibility of posterosuperior projection of external sphincter, and angle between the distal anal canal and posterosuperior projection of external sphincter (H angle) in patients and in controls were compared and analyzed using t test, Mann-Whitney U test, and Spearman correlation. The patients with chronic anal fissure had longer anal canal (51.50 mm ± 0.91 vs. 44.11 mm ± 0.71; p = 0.000), thicker internal anal sphincter muscle at mid-anal level (4.18 ± 0.15 vs. 3.39 ± 0.07; p = 0.007), and wider space between subcutaneous external sphincters (11.39 ± 0.50 vs. 6.89 ± 0.22; p = 0.000). In patients, there was a positive correlation between H angle and external sphincter thickness at proximal (r = 0.347; p = 0.021), middle (r = 0427; p = 0.000), and distal (r = 0.518; p = 0.000)) levels of the anal canal. CONCLUSıON: 3.0 Tesla MR imaging provides detailed information about the morphometric changes in the anal sphincter muscles in patients with chronic anal fissure.

The effect of deep eutectic solvent on the pharmacokinetics of salvianolic acid B in rats and its acute toxicity test.

PubMed

Chen, Jue; Wang, Qi; Liu, Mengjun; Zhang, Liwei

2017-09-15

Deep eutectic solvent (DES), the benign green solvent with uniquely physical properties, has been widely applied in various fields. Our previous study indicated that DES could improve the stability and extraction efficiency of salvianolic acid B (SAB). In this work, with SAB as a model drug, the feasibility of DES as a drug carrier for oral preparation was investigated by evaluating the influence of DES on the pharmacokinetics of SAB and the toxicity of DES. Acute oral toxicity test illustrated that choline chloride-glycerol (ChCl-GL, molar ratio 1:2) was non-toxic with the median lethal dose of 7733mg/kg. To comparison the difference of pharmacokinetics between SAB dissolved in ChCl-GL (1:2) and in water, a rapid and sensitive ultra-performance liquid chromatography coupled with mass spectrum was established to determine SAB and its metabolites in rat plasma. The method validation was also tested for the specificity, linearity (r 2 >0.9980 over two orders of magnitude), precision (intra-day relative standard deviation (RSD)<2.73% and inter-day RSD<7.72%), extraction recovery (70.96-80.78%) and stability under three different situations. Compared to water, the pharmacokinetic parameters clarified that ChCl-GL (1:2) could promote the absorption of SAB, the peak concentration (C max ) of 0.308±0.020mg/L was slightly higher than 0.277±0.024mg/L (SAB dissolved in water), and the peak time (T max ) was significantly decreased from 30min (SAB dissolved in water) to 20min. There was no significant difference on the metabolites between SAB dissolved in ChCl-GL (1:2) and in water. This is the first report on the pharmacokinetic study of DES as a candidate of drug carrier, and the results provide a meaningful basis for the application of DES in pharmaceutical preparation. Copyright © 2017 Elsevier B.V. All rights reserved.

Effet paradoxal du type d’excision sur la prise et le délai de cicatrisation des greffes expansées pour le traitement des brûlures aiguës: a propos de 1129 cas

PubMed Central

Guibert, M.; Chaouat, M.; Boccara, D.; Marco, O.; Lavocat, R.; Alameri, O.; Deslandes, E.; Montlahuc, C.; Mimoun, M.

2016-01-01

Summary La greffe de peau mince expansée est très employée dans le traitement des brûlures aiguës. Nous avons étudié l’influence de la préparation du sous-sol sur le taux de prise et le délai de cicatrisation des greffes expansées. Nous avons analysé rétrospectivement les 1 129 greffes expansées réalisées dans notre service entre 1995 et 2005 pour le traitement des brûlures aiguës. Leur taux de prise a été significativement meilleur après une préparation du sous-sol par avulsion (82%) par rapport à une préparation du sous-sol par excision tangentielle (75%). Ce taux était meilleur lorsque l’avulsion était pratiquée dans les 7 jours suivant la brûlure (83% vs 73%). Pour une prise en charge entre 7 et 21 jours, ce taux a semblé être meilleur après excision tangentielle, mais de façon non significative. La durée d’évolution jusqu’à cicatrisation était significativement raccourcie pour une préparation du sous-sol par excision tangentielle par rapport à une préparation du sous-sol par avulsion. Ces résultats montrent, paradoxalement, qu’une préparation du sous-sol par avulsion favorise la prise des greffes expansées mais rallonge leur délai de cicatrisation au contraire de l’excision tangentielle. PMID:28149235

Dépistage des maladies cardiovasculaires chez des étudiants de l'Université de Douala et influence des activités physiques et sportives

PubMed Central

Ewane, Marielle Epacka; Mandengue, Samuel Honoré; Priso, Eugene Belle; Tamba, Stéphane Moumbe; Ahmadou; Fouda, André Bita

2012-01-01

Introduction Les maladies cardiovasculaires (MCV) constituent l'une des principales causes de mortalité dans les pays en développement. Le dépistage de ces dernières chez des jeunes est un défi dans la lutte contre leur expansion. Le but de cette étude était de dépister ces maladies au sein d'une population jeunes d’étudiants camerounais. Methodes Deux mille six cent cinquante-huit étudiants de l'Université de Douala (23,6 ± 2,9 ans, sex-ratio H/F = 0,9) ont en Avril - Mai 2011 participé à une campagne de dépistage gratuit du diabète, de l'hypertension artérielle (HTA) et de l'obésité. Ils ont également été soumis à une d'enquête évaluant leur niveau en activités physiques et sportives (APS). Resultats 12,7% des participants avaient une pression artérielle (PA) ≥ 140/90 mmHg, 3,6% étaient obèses et 0,9% avaient une glycémie ≥1,26 g/L. Des corrélations ont été trouvées entre certains facteurs de risque (diabète, hypertension et obésité) et le niveau académique d'une part (r =0,366; p < 0,0001) et le temps passé devant la télévision d'autres part (r = 0,411; p < 0,0001). L‘APS était inversement corrélée à l‘âge (r =-0,015; p < 0,0001) et au temps passé devant la télévision (r = -0,059; p = 0,002). Conclusion La présence des MCV et leurs facteurs de risque mis en évidence dans cette étude réalisée en milieu estudiantin camerounais interpelle à une prévention et une éducation dans la lutte contre ces dernières. PMID:22655111

Desflurane inhalation before ischemia increases ischemia-reperfusion-induced vascular leakage in isolated rabbit lungs.

PubMed

Oshima, Yoshiaki; Sakamoto, Seiji; Yamasaki, Kazumasa; Mochida, Shinsuke; Funaki, Kazumi; Moriyama, Naoki; Otsuki, Akihiro; Endo, Ryo; Nakasone, Masato; Takahashi, Shunsaku; Harada, Tomomi; Minami, Yukari; Inagaki, Yoshimi

2016-01-01

Isoflurane and sevoflurane protect lungs with ischemia-reperfusion (IR) injury. We examined the influence of desflurane on IR lung injury using isolated rabbit lungs perfused with a physiological salt solution. The isolated lungs were divided into three groups: IR, desflurane-treated ischemia-reperfusion (DES-IR), and ventilation/perfusion-continued control (Cont) groups (n = 6 per group). In the DES-IR group, inhalation of desflurane at 1 minimum alveolar concentration (MAC) was conducted in a stable 30-min phase. In the IR and DES-IR groups, ventilation/perfusion was stopped for 75 min after the stable phase. Subsequently, they were resumed. Each lung was placed on a balance, and weighed. Weight changes were measured serially throughout this experiment. The coefficient of filtration (K fc ) was determined immediately before ischemia and 60 min after reperfusion. Furthermore, bronchoalveolar lavage fluid (BALF) was collected from the right bronchus at the completion of the experiment. After the completion of the experiment, the left lung was dried, and the lung wet-to-dry weight ratio (W/D) was calculated. The K fc values at 60 min after perfusion were 0.40 ± 0.13 ml/min/mmHg/100 g in the DES-IR group, 0.26 ± 0.07 ml/min/mmHg/100 g in the IR group, and 0.22 ± 0.08 (mean ± SD) ml/mmHg/100 g in the Cont group. In the DES-IR group, the K fc at 60 min after the start of reperfusion was significantly higher than in the other groups. In the DES-IR group, W/D was significantly higher than in the Cont group. In the DES-IR group, the BALF concentrations of nitric oxide metabolites were significantly higher than in the other groups. In the DES-IR group, the total amount of vascular endothelial growth factor in BALF was significantly higher than in the Cont group. The pre-inhalation of desflurane at 1 MAC exacerbates pulmonary IR injury in isolated/perfused rabbit lungs.

Integrating geophysical and hydrochemical borehole-log measurements to characterize the Chalk aquifer, Berkshire, United Kingdom

NASA Astrophysics Data System (ADS)

Schürch, Marc; Buckley, David

2002-09-01

Geophysical and hydrochemical borehole-logging techniques were integrated to characterize hydraulic and hydrogeochemical properties of the Chalk aquifer at boreholes in Berkshire, UK. The down-hole measurements were made to locate fissures in the chalk, their spatial extent between boreholes, and to determine the groundwater chemical quality of the water-bearing layers. The geophysical borehole logging methods used were caliper, focused resistivity, induction resistivity, gamma ray, fluid temperature, fluid electrical conductivity, impeller and heat-pulse flowmeter, together with borehole wall optical-imaging. A multiparameter data transmitter was used to measure groundwater temperature, electrical conductivity, dissolved oxygen, pH, and redox potential of the borehole fluid down-hole. High permeability developed at the Chalk Rock by groundwater circulation provides the major flow horizon at the Banterwick Barn study site and represents a conduit system that serves as an effective local hydraulic connection between the boreholes. The Chalk Rock includes several lithified solution-ridden layers, hardgrounds, which imply a gap in sedimentation possibly representing an unconformity. Lower groundwater temperature, high dissolved-oxygen content, and flowmeter evidence of preferential groundwater flow in the Chalk Rock indicated rapid groundwater circulation along this horizon. By repeating the logging at different times of the year under changing hydraulic conditions, other water-inflow horizons within the Chalk aquifer were recognized. Résumé. Des techniques géophysiques et hydrochimiques de diagraphies en forage ont été mises en oeuvre pour caractériser les propriétés hydrauliques et hydrogéochimiques de l'aquifère de la craie dans des forages du Berkshire (Grande-Bretagne). Les mesures en descente ont été faites pour localiser les fissures dans la craie et leur développement spatial entre forages, et pour déterminer la qualité de l'eau souterraine des niveaux aquifères. Les méthodes géophysiques utilisées pour les diagraphies en forage étaient le calibrage, la résistivité concentrée, la résistivité par induction, le rayonnement gamma, la température du fluide, la conductivité électrique du fluide, un courantomètre à impulsions et à flux de chaleur, avec une sonde vidéo pour l'examen des parois du forage. Une sonde multiparamètre a été utilisée pour mesurer la température, la conductivité électrique, l'oxygène dissous, le pH et le potentiel redox dans le fluide du forage à la descente. Une forte perméabilité développée dans la craie par les écoulements souterrains forme le principal niveau d'écoulement du site d'étude de Banterwick Barn ; elle est constituée d'un système de conduits qui crée une connexion hydraulique locale efficace entre les forages. Cet horizon est formé de plusieurs niveaux de haut-fonds lithifiés, qui impliquent l'existence d'une lacune de sédimentation susceptible pouvant correspondre à une discordance. Une plus faible température de l'eau souterraine, une plus forte concentration en oxygène dissous, les indications du courantomètre sur un écoulement préférentiel dans la craie indiquent une circulation rapide de l'eau souterraine le long de cet horizon. En répétant les diagraphies à des moments différents de l'année sous des conditions hydrauliques variées, d'autres horizons d'écoulements d'eau dans l'aquifère de la craie ont été reconnus. Resumen. Se ha integrado técnicas geofísicas e hidroquímicas de registro de sondeos para caracterizar las propiedades hidráulicas e hidrogeoquímicas del acuífero de la Creta en perforaciones de Berkshire (Reino Unido). Las medidas en los sondeos tenían como objetivo localizar fisuras en las cretas, así como determinar su extensión espacial entre sondeos y calidad química de las aguas subterráneas. Entre los métodos de testificación geofísica utilizados, se halla el calibre, la resistividad focalizada e inducida, los rayos gamma, la temperatura y la conductividad eléctrica del fluido, impulsores y medidores de flujo en sondeos por pulsos de calor, junto con el televisor óptico en las paredes de los sondeos. Se ha empleado un transmisor multiparamétrico para medir la temperatura, la conductividad eléctrica, el oxígeno disuelto, el pH y el potencial redox de las aguas subterráneas en el sondeo. El horizonte más productivo está asociado a las superficies litificadas ('hardgrounds') de la Creta que han desarrollado una permeabilidad elevada debido a la circulación de las aguas subterráneas identificado en el emplazamiento de Banterwick Barn, representa un sistema de conductos que actúa como conexión hidráulica local efectiva entre los sondeos. La Creta incluye una serie de 'hardgrounds' compactada por migración de fluidos, produciendo un hiato sedimentario que posiblemente representa una inconformidad. La menor temperatura de las aguas subterráneas, junto con un alto contenido de oxígeno disuelto y la evidencia aportada por el medidor de flujo en sondeos respecto a un flujo preferente en la Creta, indican que la circulación de las aguas es rápida en dicho horizonte. Repitiendo la testificación en épocas distintas del año y bajo condiciones hidráulicas diferentes, se ha podido identificar otros niveles productivos en el acuífero de la Creta.

Pax2 regulates a fadd-dependent molecular switch that drives tissue fusion during eye development.

PubMed

Viringipurampeer, Ishaq A; Ferreira, Todd; DeMaria, Shannon; Yoon, Jookyung J; Shan, Xianghong; Moosajee, Mariya; Gregory-Evans, Kevin; Ngai, John; Gregory-Evans, Cheryl Y

2012-05-15

Tissue fusion is an essential morphogenetic mechanism in development, playing a fundamental role in developing neural tube, palate and the optic fissure. Disruption of genes associated with the tissue fusion can lead to congenital malformations, such as spina bifida, cleft lip/palate and ocular coloboma. For instance, the Pax2 transcription factor is required for optic fissure closure, although the mechanism of Pax2 action leading to tissue fusion remains elusive. This lack of information defining how transcription factors drive tissue morphogenesis at the cellular level is hampering new treatments options. Through loss- and gain-of-function analysis, we now establish that pax2 in combination with vax2 directly regulate the fas-associated death domain (fadd) gene. In the presence of fadd, cell proliferation is restricted in the developing eye through a caspase-dependent pathway. However, the loss of fadd results in a proliferation defect and concomitant activation of the necroptosis pathway through RIP1/RIP3 activity, leading to an abnormal open fissure. Inhibition of RIP1 with the small molecule drug necrostatin-1 rescues the pax2 eye fusion defect, thereby overcoming the underlying genetic defect. Thus, fadd has an essential physiological function in protecting the developing optic fissure neuroepithelium from RIP3-dependent necroptosis. This study demonstrates the molecular hierarchies that regulate a cellular switch between proliferation and the apoptotic and necroptotic cell death pathways, which in combination drive tissue morphogenesis. Furthermore, our data suggest that future therapeutic strategies may be based on small molecule drugs that can bypass the gene defects causing common congenital tissue fusion defects.

Land subsidence and earth fissures in south-central and southern Arizona, USA

NASA Astrophysics Data System (ADS)

Conway, Brian D.

2016-05-01

Land subsidence due to groundwater overdraft has been an ongoing problem in south-central and southern Arizona (USA) since the 1940s. The first earth fissure attributed to excessive groundwater withdrawal was discovered in the early 1950s near Picacho. In some areas of the state, groundwater-level declines of more than 150 m have resulted in extensive land subsidence and earth fissuring. Land subsidence in excess of 5.7 m has been documented in both western metropolitan Phoenix and Eloy. The Arizona Department of Water Resources (ADWR) has been monitoring land subsidence since 2002 using interferometric synthetic aperture radar (InSAR) and since 1998 using a global navigation satellite system (GNSS). The ADWR InSAR program has identified more than 25 individual land subsidence features that cover an area of more than 7,300 km2. Using InSAR data in conjunction with groundwater-level datasets, ADWR is able to monitor land subsidence areas as well as identify areas that may require additional monitoring. One area of particular concern is the Willcox groundwater basin in southeastern Arizona, which is the focus of this paper. The area is experiencing rapid groundwater declines, as much as 32.1 m during 2005-2014 (the largest land subsidence rate in Arizona State—up to 12 cm/year), and a large number of earth fissures. The declining groundwater levels in Arizona are a challenge for both future groundwater availability and mitigating land subsidence associated with these declines. ADWR's InSAR program will continue to be a critical tool for monitoring land subsidence due to excessive groundwater withdrawal.

European Fissure Sealant Guidelines: assessment using AGREE II.

PubMed

San Martin-Galindo, L; Rodríguez-Lozano, F J; Abalos-Labruzzi, C; Niederman, R

2017-02-01

Pit and fissure sealants are effective in reducing the incidence of occlusal caries, and multiple clinical practice guidelines (CPGs) have been developed for recommending their proper use. The usefulness of CPGs depends on their quality and on the rigour of the guideline development process. A study was made to assess the quality of current European CPGs based on the Appraisal of Guidelines for Research and Evaluation (AGREE II) instrument, which uses 23 key items rated on a 7-point scale to assess practice guideline development and the quality of reporting. A search was conducted for fissure sealant guidelines for preventing caries in children and adults at high and low risk published in the last 10 years. Calibration was carried out before scoring to assess agreement between the appraisers using the AGREE II instrument. The searches identified 19 relevant guidelines, and following application of the inclusion/exclusion criteria, three guidelines were retained for evaluation. The proportion of observed agreement was calculated, expressed by the agreement separately for positive and negative ratings (PA = 0.89, NA = 0-91). The results of the guideline assessments revealed the highest score for the Irish guideline, a moderate score for the French guideline and the lowest score for the European guideline. Based on the AGREE II instrument, the results obtained show significant variation in the quality assessment of the three European Fissure Sealant Guidelines. Future studies should be carried out both to develop quality dental CPGs and to investigate effective ways of adopting them. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Genome-wide association studies of pit-and-fissure- and smooth-surface caries in permanent dentition.

PubMed

Zeng, Z; Shaffer, J R; Wang, X; Feingold, E; Weeks, D E; Lee, M; Cuenco, K T; Wendell, S K; Weyant, R J; Crout, R; McNeil, D W; Marazita, M L

2013-05-01

While genetics clearly influences dental caries risk, few caries genes have been discovered and validated. Recent studies have suggested differential genetic factors for primary dentition caries and permanent dentition caries, as well as for pit-and-fissure- (PF) and smooth- (SM) surface caries. We performed separate GWAS for caries in permanent-dentition PF surfaces (1,017 participants, adjusted for age, sex, and the presence of Streptococcus mutans) and SM surfaces (1,004 participants, adjusted for age, education group, and the presence of Streptococcus mutans) in self-reported whites (ages 14 to 56 yrs). Caries scores were derived based on visual assessment of each surface of each tooth; more than 1.2 million SNPs were either successfully genotyped or imputed and were tested for association. Two homologous genes were suggestively associated: BCOR (Xp11.4) in PF-surface caries (p value = 1.8E-7), and BCORL1 (Xq26.1) in SM-surface caries (p value = 1.0E-5). BCOR mutations cause oculofaciocardiodental syndrome, a Mendelian disease involving multiple dental anomalies. Associations of other plausible cariogenesis genes were also observed for PF-surface caries (e.g., INHBA, p value = 6.5E-6) and for SM-surface caries (e.g., CXCR1 and CXCR2, p value = 1.9E-6). This study supports the notion that genes differentially affect cariogenesis across the surfaces of the permanent dentition, and nominates several novel genes for investigation.

Genome-wide Association Studies of Pit-and-Fissure- and Smooth-surface Caries in Permanent Dentition

PubMed Central

Zeng, Z.; Shaffer, J.R.; Wang, X.; Feingold, E.; Weeks, D.E.; Lee, M.; Cuenco, K.T.; Wendell, S.K.; Weyant, R.J.; Crout, R.; McNeil, D.W.; Marazita, M.L.

2013-01-01

While genetics clearly influences dental caries risk, few caries genes have been discovered and validated. Recent studies have suggested differential genetic factors for primary dentition caries and permanent dentition caries, as well as for pit-and-fissure- (PF) and smooth- (SM) surface caries. We performed separate GWAS for caries in permanent-dentition PF surfaces (1,017 participants, adjusted for age, sex, and the presence of Streptococcus mutans) and SM surfaces (1,004 participants, adjusted for age, education group, and the presence of Streptococcus mutans) in self-reported whites (ages 14 to 56 yrs). Caries scores were derived based on visual assessment of each surface of each tooth; more than 1.2 million SNPs were either successfully genotyped or imputed and were tested for association. Two homologous genes were suggestively associated: BCOR (Xp11.4) in PF-surface caries (p value = 1.8E-7), and BCORL1 (Xq26.1) in SM-surface caries (p value = 1.0E-5). BCOR mutations cause oculofaciocardiodental syndrome, a Mendelian disease involving multiple dental anomalies. Associations of other plausible cariogenesis genes were also observed for PF-surface caries (e.g., INHBA, p value = 6.5E-6) and for SM-surface caries (e.g., CXCR1 and CXCR2, p value = 1.9E-6). This study supports the notion that genes differentially affect cariogenesis across the surfaces of the permanent dentition, and nominates several novel genes for investigation. PMID:23470693

Mapping lava morphology of the Galapagos Spreading Center at 92°W: fuzzy logic provides a classification of high-resolution bathymetry and backscatter

NASA Astrophysics Data System (ADS)

McClinton, J. T.; White, S. M.; Sinton, J. M.; Rubin, K. H.; Bowles, J. A.

2010-12-01

Differences in axial lava morphology along the Galapagos Spreading Center (GSC) can indicate variations in magma supply and emplacement dynamics due to the influence of the adjacent Galapagos hot spot. Unfortunately, the ability to discriminate fine-scale lava morphology has historically been limited to observations of the small coverage areas of towed camera surveys and submersible operations. This research presents a neuro-fuzzy approach to automated seafloor classification using spatially coincident, high-resolution bathymetry and backscatter data. The classification method implements a Sugeno-type fuzzy inference system trained by a multi-layered adaptive neural network and is capable of rapidly classifying seafloor morphology based on attributes of surface geometry and texture. The system has been applied to the 92°W segment of the western GSC in order to quantify coverage areas and distributions of pillow, lobate, and sheet lava morphology. An accuracy assessment has been performed on the classification results. The resulting classified maps provide a high-resolution view of GSC axial morphology and indicate the study area terrain is approximately 40% pillow flows, 40% lobate and sheet flows, and 10% fissured or faulted area, with about 10% of the study area unclassifiable. Fine-scale features such as eruptive fissures, tumuli, and individual pillowed lava flow fronts are also visible. Although this system has been applied to lava morphology, its design and implementation are applicable to other undersea mapping applications.

Microleakage and penetration of a hydrophilic sealant and a conventional resin-based sealant as a function of preparation techniques: a laboratory study.

PubMed

Khogli, Ahmed Eltigani; Cauwels, Rita; Vercruysse, Chris; Verbeeck, Ronald; Martens, Luc

2013-01-01

Optimal pit and fissure sealing is determined by surface preparation techniques and choice of materials. This study aimed (i) to compare the microleakage and penetration depth of a hydrophilic sealant and a conventional resin-based sealant using one of the following preparation techniques: acid etching (AE) only, a diamond bur + AE, and Er:YAG laser combined with AE, and (ii) to evaluate the microleakage and penetration depth of the hydrophilic pit and fissure sealant on different surface conditions. Eighty recently extracted 3rd molars were randomly assigned to eight groups of ten teeth according to the material, preparation technique, and surface condition. For saliva contamination, 0.1 mL of fresh whole human saliva was used. All samples were submitted to 1000 thermal cycles and immersed in 2% methylene blue dye for 4 h. Sections were examined by a light microscope and analysed using image analysis software (Sigmascan(®)). The combination of Er:YAG + AE + conventional sealant showed the least microleakage. The sealing ability of the hydrophilic sealant was influenced by the surface condition. Er:YAG ablation significantly decreased the microleakage at the tooth-sealant interface compared to the non-invasive technique. The hydrophilic sealant applied on different surface conditions showed comparable result to the conventional resin-based sealant. © 2012 The Authors. International Journal of Paediatric Dentistry © 2012 BSPD, IAPD and Blackwell Publishing Ltd.

Facteurs prédictifs de l’échec de traitement antituberculeux en Guinée Conakry

PubMed Central

Nimagan, Souleymane; Bopaka, Regis Gothard; Diallo, Mamadou Mouctar; Diallo, Boubacar Djelo; Diallo, Mamadou Bailo; Sow, Oumou Younoussa

2015-01-01

La tuberculose est un véritable problème de santé publique. C'est une maladie guérissable et cette guérison passe par une bonne prise en charge thérapeutique. Il arrive parfois on assiste à l’échec thérapeutique, d'où l'intérêt de notre étude portant sur les facteurs prédictifs de ses échecs. Dans l'espace d'une année sur 1300 cas de tuberculose toute forme confondue, 700 cas de tuberculose pulmonaire à microscopie positive ont été répertorié dont 100 cas transférés. La tranche d’âge de 15-25 ans a été la plus touchée avec un sexe-ratio de 2 en faveur des hommes et 41,66% de nos malades ont été les ouvriers suivis de 20,83% des commerçants. La majorité de nos patients provenait de Conakry soit 99, 5%. Sur 600 patients suivis les nouveaux cas représentaient 83,33% et l’échec thérapeutique représentait 12 cas soit 2%. L'interruption du traitement représente le principal facteur de l’échec. Les facteurs qui ont influencé la régularité des malades au traitement ont été multiples. Des facteurs liés à l'organisation du système de santé, la rupture des médicaments antituberculeux, l’éducation sanitaire insuffisante, les contraintes de la supervision du traitement, l'implication insuffisante et la vente des médicaments par le personnel de santé. Des facteurs liés aux patients eux-mêmes, la crainte de perte d'emploi, les contraintes financières. Les renforcements de l'organisation du système sanitaire et l’éducation thérapeutiques pourront réduire le taux d’échec du traitement antituberculeux. L'amélioration de la qualité de la prise en charge des malades en situation d’échec devrait passer par une culture systématique des expectorations avec antibiogramme. PMID:26889327

Profil bactériologique du pied diabétique et son impact sur le choix des antibiotiques

PubMed Central

Zemmouri, Adil; Tarchouli, Mohamed; Benbouha, Abdellatif; Lamkinsi, Tarik; Bensghir, Mustapha; Elouennass, Mostafa; Haimeur, Cherqui

2015-01-01

Introduction Analyse du profil bactériologique des pieds diabétiques pris en charge à l'hôpital militaire de Rabat et son influence sur l'antibiothérapie de première intention. Méthodes Etude prospective non randomisée étalée sur 18 mois, ayant concerné 105 patients. Après recueil des données et en attente des résultats bactériologiques nos patients ont été divisés en deux groupes: un groupe a été mis sous Amoxicilline + Acide clavulanique + Gentamycine (59 patients) et un groupe sous Ertapénème±Gentamycine (46 patients). Résultats L’étude a regroupé 85 hommes et 20 femmes (sexe ratio = 4.26). L’âge moyen est de 64.4 ans. La gangrène a été observée chez 79% des malades; elle était humide-donc surinfectée en principe- dans 43% des cas. Par ailleurs, 67% des malades ont un chiffre de globules blancs 12000 définissant une infection sévère. L'ostéolyse a été mise en évidence chez 27% de nos patients. Parmi les différentes techniques de prélèvements: 81% ont été profonds dont 21% de biopsie osseuse per opératoire et 14% de prélèvements combinés. 42% de ces prélèvements sont poly microbiens et 21% sont stériles. Les résultats bactériologiques viennent confirmer la prédominance des bactéries aérobies à Gram positif. Le taux de remplacement de l'Ertapénème est de 22% contre un taux de 50% pour l'Amoxiclav. Conclusion L'antibiothérapie ne doit être instaurée qu'en cas d'infection du pied diabétique diagnostiquée sur les critères cliniques établis par les consensus internationaux récents. Le respect des mesures de lutte contre la diffusion de la résistance bactérienne s'avère primordiale. PMID:27386024

Fractography of the high temperature hydrogen attack of a medium carbon steel

NASA Technical Reports Server (NTRS)

Melson, H. G.; Moorhead, R. D.

1975-01-01

Microscopic fracture processes were studied which are associated with hydrogen attack of a medium carbon steel in a well-controlled, high-temperature, high-purity hydrogen environment. Exposure to a hydrogen pressure and temperature of 3.5 MN/m2 and 575 C was found to degrade room temperature tensile properties with increasing exposure time. After 408 hr, yield and ultimate strengths were reduced by more than 40 percent and elongation was reduced to less than 2 percent. Initial fissure formation was found to be associated with manganese rich particles, most probably manganese oxide, aligned in the microstructure during the rolling operation. Fissure growth was found to be associated with a reduction in carbide content of the microstructure and was inhibited by the depletion of carbon. The interior surfaces of sectioned fissures or bubbles exhibit both primary and secondary cracking by intergranular separation. The grain surfaces were rough and rounded, suggesting a diffusion-associated separation process. Specimens that failed at room temperature after exposure to hydrogen were found to exhibit mixed mode fracture having varying amounts of intergranular separation, dimple formation, and cleavage, depending on exposure time.

Fractography of the high temperature hydrogen attack of a medium carbon steel

NASA Technical Reports Server (NTRS)

Nelson, H. G.; Moorhead, R. D.

1976-01-01

Results are reported for an experimental study of the microscopic fracture processes associated with hydrogen attack of a commercially produced plain carbon steel in a well-controlled high-temperature hydrogen environment of high purity. In the experiments, sheet samples were exposed to laboratory-grade hydrogen at a pressure of 3.5 MN/sq m and a temperature of 575 C. The fractography of gas-filled fissures and failed tension specimens is analyzed in an effort to identify any predominant microstructural defect associated with fissure formation, the prevalent modes of fracture, and the contribution of gas-filled fissures to the overall failure process. It is found that the tensile properties of the examined steel were significantly degraded after as few as 136 hr of exposure to a high-purity hydrogen atmosphere at 575 C; that the yield strength, ultimate strength, and elongation at fracture were all reduced progressively with increasing exposure time; and that the yield and ultimate strengths were reduced more than 40% after 408 hr while elongation was reduced to less than 2%.

Systematic review of noninvasive treatments to arrest dentin non-cavitated caries lesions

PubMed Central

de Assunção, Isauremi Vieira; da Costa, Giovanna de Fátima Alves; Borges, Boniek Castillo Dutra

2014-01-01

AIM: To systematically review the literature on the efficacy of noninvasive methods of arresting the progression of non-cavitated occlusal carious lesions in dentin. METHODS: The Medline/PubMed, LILACS, SciELO and Scopus databases were searched to identify relevant publications through to November 2013. Only clinical trials evaluating the ability of noninvasive methods to arrest the progression of occlusal non-cavitated carious lesions in dentin were included. Screening, data extraction and quality assessment were conducted independently and in duplicate. RESULTS: Of 167 citations identified, nine full text articles were screened and five were included in the analysis. All papers reported on occlusal fissure sealing using a self-curing glass ionomer (n = 1) or resin-based (n = 4) sealant. Only the use of resin-based sealant to obliterate occlusal fissures arrested the progression of non-cavitated occlusal carious lesions in dentin. CONCLUSION: Occlusal fissure sealing with a resin-based sealant may arrest the progression of non-cavitated occlusal dentinal caries. Further clinical trials with longer follow-up times should be performed to increase scientific evidence. PMID:24868513

The relationship between the nitrate concentration and hydrology of a small chalk spring; Israel

NASA Astrophysics Data System (ADS)

Burg, Avi; Heaton, Tim H. E.

1998-01-01

Discharge from a spring draining a small, perched, Cretaceous chalk aquifer in the Upper Galilee, Israel, was monitored over a period of two years. The water has elevated nitrate concentrations, with 15N/ 14N and chemical data suggesting that it is a mixture of low-nitrate and high-nitrate end-members; the latter derived from the sewage of a centuries-old village served by septic tanks. Hydrograph data allowed distinction between fissure flow during the period of winter rainfall, and matrix drainage during the dry summer months. These different flow types, however, did not have markedly different nitrate concentrations: a 50-fold increase in spring discharge due to fissure flow, compared with matrix drainage, was reflected in only a 35% decrease in nitrate concentrations. The relatively high nitrate concentrations in the fissure waters suggests that they have had close contact with, and are possibly displaced from the matrix. This should help to accelerate the decline in the spring's nitrate concentrations following the recent completion of the village's central sewage drainage system.

Prévalence et caractéristiques des effets indésirables des antihypertenseurs chez les patients suivis en ambulatoire au Centre Hospitalier Universitaire Yalgado Ouédraogo

PubMed Central

Millogo, Georges Rosario Christian; Zongo, Ragomzingba Frank Edgard; Benao, Anita; Youl, Estelle Noëla Hoho; Bassoleth, Blaise Alexandre Bazona; Ouédraogo, Moussa; Zabsonré, Patrice; Guissou, Innocent Pierre

2018-01-01

La prise en charge médicamenteuse de l'hypertension artérielle (HTA) entraine des effets indésirables qui peuvent être gênants et ainsi influencer l'observance du patient. Nous avons étudié ces effets indésirables dans le service de cardiologie du Centre hospitalier universitaire Yalgado Ouédraogo afin de déterminer leurs fréquences et leurs caractéristiques. Il s'agissait d'une étude transversale de juillet à septembre 2015 chez les patients suivis en ambulatoire pour HTA. Les données ont été obtenues à partir de l'interrogatoire, des carnets de suivi des patients et des fiches de consultations. Au total 278 patients ont été inclus. La population d'étude incluait 69,1% de femmes. L'âge moyen était de 52,2 ans avec des extrêmes de 23 et 86 ans. Quatre vingt et sept virgule huit pourcent (87,8%) vivaient en milieu urbain. Le tabagisme, la dyslipidémie et les antécédents familiaux d'HTA représentaient respectivement 9%, 35,6% et 57,2%. Au plan thérapeutique, 43,2% étaient sous monothérapie, 35,6% sous bithérapie à l'initiation du traitement. Les inhibiteurs calciques (59,7%) étaient la classe thérapeutique la plus utilisée. La prévalence globale des effets indésirables était de 60,1%. Les inhibiteurs calciques étaient impliqués dans 53,6% suivis des diurétiques (48,6%) dans la survenue de l'effet indésirable. La prévalence spécifique par molécule était 28,1% pour l'amlodipine et 24,5% pour l'hydrochlorothiazide. La diurèse excessive (13,7%), la toux (12,9%) et les vertiges (11,5%) étaient les effets indésirables les plus fréquemment évoqués par les patients. Le système nerveux central et périphérique et le système ostéo-musculaire étaient les systèmes les plus atteints. Les effets indésirables sont un déterminant majeur de l'adhésion aux traitements antihypertenseur, car leur impact sur la vie quotidienne des patients peut s'avérer significatif. PMID:29875965

Field technique of permeability tests in highly fissured limestone strata

NASA Astrophysics Data System (ADS)

Al-Salihi, Adnan; Asaad, Abdulah

2002-05-01

Résumé.L'étude de dispositifs de dénoyage est nécessaire pour l'amélioration de sites avant la construction de certaines structures. L'étude de dispositifs de dénoyage efficaces exige d'estimer la valeur du coefficient de perméabilité in situ. Les relations disponibles pour estimer le coefficient de perméabilité ont été développées sur la base de mesures et de conditions de terrain limitées, et les prédictions varient de plusieurs ordres de grandeur. C'est pourquoi il est nécessaire de réaliser des mesures de perméabilité sur le terrain et de déterminer la relation qui permet le meilleur ajustement de ces mesures avant l'étude du dispositif de dénoyage pour des conditions locales et géologiques spécifiques. Ce papier présente des mesures de perméabilité sur le terrain dans des niveaux calcaires complexes chaotiques et diagénétisés. Il propose également une analyse comparative de plusieurs relations disponibles dans la littérature destinées à prédire le coefficient de perméabilité in situ. L'analyse est faite en conditions permanentes et non permanentes. Les résultats montrent que la valeur du coefficient de perméabilité dépend du niveau de la nappe, qui est affecté par le régime de marées. On montre que l'équation de l'US Navy donne la meilleure corrélation avec les mesures de terrain. Resumen.El diseño de sistemas de desecado es necesario para mejorar las condiciones de un emplazamiento antes de la construcción de determinadas estructuras. El diseño de un sistema eficiente de desecado requiere de la estimación del valor de la permeabilidad in-situ. Las relaciones disponibles para tal fin han sido desarrolladas bajo condiciones y medidas de campo limitadas; sus predicciones varían en algunos órdenes de magnitud. Por tanto, es necesario tomar medidas de permeabilidad en campo y determinar la relación que reproduce mejor dichas medidas como paso previo al diseño de un sistema de desecado en condiciones geológicas y de emplazamiento específicas. Este artículo presenta medidas de permeabilidad en campo para estratos de calcita caóticos y diagenéticos. También ofrece un análisis comparativo de diversas relaciones disponibles en la bibliografía con el fin de predecir el valor de la permeabilidad in-situ. El análisis se ha hecho tanto en régimen permanente como en estacionario. Los resultados demuestran que la permeabilidad depende del nivel freático, el cual está afectado por las mareas. La ecuación de la Marina estadounidense es la que proporciona una mejor correlación con las medidas de campo.

Granicus Valles

NASA Image and Video Library

2002-12-16

The force of moving water from a flood carved these teardrop-shaped islands within Granicus Valles. The orientation of the islands can be used as an indicator of the direction the water flowed. In this case, the water flowed primarily towards the upper left of the image. The image also contains many narrow sinuous channels. Geologists can determine that the floods occurred before a later tectonic event in the region. This event caused the crust to fracture into numerous blocks and fissures (grabens). Many fissures can be seen cutting across the former flood pathways. http://photojournal.jpl.nasa.gov/catalog/PIA04037

A systematic review and meta-analysis of the treatment of anal fissure.

PubMed

Nelson, R L; Manuel, D; Gumienny, C; Spencer, B; Patel, K; Schmitt, K; Castillo, D; Bravo, A; Yeboah-Sampong, A

2017-08-01

Anal fissure has a very large number of treatment options. The choice is difficult. In an effort to assist in that, choice presented here is a systematic review and meta-analysis of all published treatments for anal fissure that have been studied in randomized controlled trials. Randomized trials were sought in the Cochrane Controlled Trials Register, Medline, EMBASE and the trials registry sites clinicaltrials.gov and who/int/ictrp/search/en. Abstracts were screened, full-text studies chosen, and finally eligible studies selected and abstracted. The review was then divided into those studies that compared two or more surgical procedures and those that had at least one arm that was non-surgical. Studies were further categorized by the specific interventions and comparisons. The outcome assessed was treatment failure. Negative effects of treatment assessed were headache and anal incontinence. Risk of bias was assessed for each study, and the strength of the evidence of each comparison was assessed using the Grading of Recommendations, Assessment, Development and Evaluations (GRADE) approach. One hundred and forty-eight eligible trials were found and assessed, 31 in the surgical group and 117 in the non-surgical group. There were 14 different operations described in the surgical group and 29 different non-surgical treatments in the non-surgical group along with partial lateral internal sphincterotomy (LIS). There were 61 different comparisons. Of these, 47 were reported in 2 or fewer studies, usually with quite small patient samples. The largest single comparison was glyceryl trinitrate (GTN) versus control with 19 studies. GTN was more effective than control in sustained cure (OR 0.68; 95% CI 0.63-0.77), but the quality of evidence was very poor because of severe heterogeneity, and risk of bias due to inadequate clinical follow-up. The only comparison to have a GRADE quality of evidence of high was a subgroup analysis of LIS versus any medical therapy (OR 0.12; CI 0.07-0.21). Most of the other studies were downgraded in GRADE due to imprecision. LIS is superior to non-surgical therapies in achieving sustained cure of fissure. Calcium channel blockers were more effective than GTN and with less risk of headache, but with only a low quality of evidence. Anal incontinence, once thought to be a frequent risk with LIS, was found in various subgroups in this review to have a risk between 3.4 and 4.4%. Among the surgical studies, manual anal stretch performed worse than LIS in the treatment of chronic anal fissure in adults. For those patients requiring surgery for anal fissure, open LIS and closed LIS appear to be equally efficacious, with a moderate GRADE quality of evidence. All other GRADE evaluations of procedures were low to very low due mostly to imprecision.

Self-reports of trauma and dissociation: An examination of context effects.

PubMed

Lemons, Peter; Lynn, Steven Jay

2016-08-01

To examine context effects in moderating the link between self-reported trauma and dissociation in undergraduate samples, we administered these measures either in the same or different experimental contexts. Trauma History Screen/THS (Carlson et al., 2011)-Dissociative Experiences Scale/DES-II (Bernstein & Putnam, 1986) correlations revealed a context effect (greater correlations in same test context), although multiple regression analyses did not confirm this finding. A context effect was supported in DES-Taxon scores using multiple regression for the THS but not the Modified Posttraumatic Stress Scale (MPSS-SR; Falsetti, Resnick, Resick, & Kilpatrick, 1993), an effect confirmed with correlation comparisons. Ethnicity influenced the association between measures of trauma and dissociation. Overall, the relation between measures of trauma and dissociation was small to medium, although high correlations were observed between the DES depersonalization/derealization subscale and the Multiscale Dissociation Inventory (Briere, Weathers, & Runtz, 2005) depersonalization and derealization subscales, supporting the construct validity of these measures. Copyright © 2016 Elsevier Inc. All rights reserved.

Etude microdosimetrique de l'influence des materiaux sur l'efficacite biologique d'une source d'iode-125

NASA Astrophysics Data System (ADS)

Taschereau, Richard

Cette these concerne les implants permanents pour la prostate. Les isotopes employes, le 103Pd et l'125I, semblent produire les memes resultats cliniques: le premier a cause d'une radiation plus efficace et le second a cause de sa demi-vie plus longue. La recherche utilise le cadre theorique de la microdosimetrie et des simulations Monte Carlo. Elle propose d'employer le spectre d'ejection dans le calcul de l'efficacite; ce changement fait passer l'efficacite relative du 103Pd de 10% a 5%. Elle montre ensuite qu'il est possible d'ameliorer l'efficacite de la radiation de 125I par l'exploitation des rayons X caracteristiques de la capsule. Une source amelioree faite de molybdene et d'yttrium est donnee en exemple. Elle procure une radiation de 5--7% plus efficace, ce qui surclasse les deux sources existantes. Les applications ne se limitent pas au traitement de la prostate; le traitement du melanome oculaire et la curietherapie endovasculaire pourraient en beneficier.

Etude expérimentale des écoulements darcéens à travers un lit de fibres rigides empilées aléatoirement: influence de la porosité

NASA Astrophysics Data System (ADS)

Rahli, O.; Tadrist, L.; Miscevic, M.; Santini, R.

1995-11-01

Experimental studies have been carried out on fluid flow through porous media made up of randomly packed monodisperse fibers. The fibers of fixed diameter have an aspect ratio (L/d) varying between 4 and 70 given porosities of the porous media varying between 0.35 and 0.90. The relationships between friction losses and superficial velocity have been systematically determined for each porous medium. A detailed analysis is carried out for low fluid velocities. The influence of flow direction on pressure drop is studied along two perpendicular directions: it is found that fibrous media behave globally in isotropic manner. The permeability and the Kozeny Carman parameter k_k are deduced from experimental results. The variations of the permeability increase exponentially with the porosity. The Kozeny Carman parameter k_k is a decreasing function of the porosity ɛ(L/d) and tends asymptotically to a value close to that deduced from a modified Ergun relation. The important decrease, observed for small aspect ratios, is certainly an effect of the cut sections of fibers. This effect becomes negligible for larger aspect ratios. The results in terms of permeability and of Kozeny Carman parameter k_k are systematically compared to those deduced from various theoretical models. Generally, these models consider cylinders arranged in simple network, the flow being either parallel or perpendicular to the axis of cylinders. The variation laws of the parameter k_k, deduced from different models, present important discrepancies with our experimental results. The theoretical models, established for regular arrays of fibers do not correctly describe the behavior of randomly packed fibers. Des études expérimentales de l'écoulement d'un fluide à travers un milieu poreux constitué de fibres monodisperses empilées aléatoirement sont réalisées. Les milieux fibreux étudiés ont des porosités variant de 0,35 à 0,90. Ces porosités sont obtenues à l'aide de fibres dont le rapport d'aspect L/d varie de 4 à 70. Les lois de perte de charge en fonction de la vitesse du fluide sont déterminées systématiquement pour chaque milieu poreux. Une analyse détaillée est effectuée pour les faibles vitesses d'écoulement. L'influence de la direction de l'écoulement sur les lois de perte de charge est étudiée. Celles-ci sont établies suivant deux directions perpendiculaires. Les résultats obtenus mettent en évidence un comportement du milieu fibreux globalement isotrope vis à vis de l'écoulement du fluide. La perméabilité et le paramètre de Kozeny Carman k_k sont déduits des résultats expérimentaux. Les variations de la perméabilité en fonction de la porosité suivent une loi de type exponentiel. Le paramètre de Kozeny Carman k_k décroît en fonction de la porosité ɛ(L/d) et tend asymptotiquement vers une valeur proche de celle déduite de la relation d'Ergun modifiée. La décroissance importante, observée pour les petits rapports d'aspect, est sans doute due aux effets induits par les surfaces de base des fibres. Ces effets deviennent négligeables pour les grands rapports d'aspect. Les résultats en terme de perméabilité et de paramètre de Kozeny Carman sont comparés systématiquement avec les modèles proposés dans la littérature. Généralement, ces modèles supposent des cylindres de grande longueur, disposés en réseaux simples. L'écoulement est soit parallèle, soit perpendiculaire à l'axe des cylindres. Les lois de variation du paramètre k_k, déduites des différents modèles, présentent des écarts importants avec les résultats expérimentaux. Ces résultats semblent montrer qu'une disposition des fibres en réseaux simples ne permet pas une description convenable des écoulements à travers les empilements aléatoires de fibres.

Peut-on améliorer la motivation des étudiants en médecine pour un cours fondamental de physiologie en intégrant à l’exposé magistral quelques méthodes pédagogiques actives?

PubMed Central

Bentata, Yassamine; Delfosse, Catherine

2017-01-01

La motivation des étudiants est une condition essentielle à l’apprentissage et la perception qu’a l’étudiant de la valeur qu’il accorde à une activité est l’une des trois composantes majeures de cette motivation. Comment amener les étudiants à percevoir l’utilité et l’intérêt de leurs cours universitaires tout en suscitant leur motivation ? L’objectif de l’étude est de déterminer la perception de la valeur attribuée par les étudiants au cours fondamental de physiologie et d’évaluer l’impact de l’intégration de quelques méthodes d’apprentissage actif aux exposés magistraux sur la motivation des étudiants du premier cycle des études médicales dans une jeune faculté. Cette étude prospective, a concerné les étudiants de deuxième année de médecine (PCEM2). Nous avons procédé initialement à une appréciation de la perception de la motivation des étudiants pour les cours universitaires via un premier questionnaire, après nous avons intégré deux activités pédagogiques: l’étude de cas et la réalisation de carte conceptuelle aux exposés magistraux du module de physiologie et à la fin nous avons évalué via un deuxième questionnaire l’impact de ces deux activités sur la motivation des étudiants. 131 et 109 étudiants ont rempli et rendu respectivement le 1er et le 2ème questionnaire parmi les 249 étudiants inscrits en PCEM2. La motivation de nos étudiants à l’égard de leurs cours universitaires était globalement très favorable, même si la motivation pour le cours de physiologie (70,8%) était légèrement moins importante que pour l’ensemble des cours (80%). Nos étudiants avaient apprécié les deux activités proposées et seulement 13% (pour l’étude de cas) et 16,8% (pour la carte) ne se montraient pas satisfaits. 40,9% des étudiants avaient réalisé une carte conceptuelle et la qualité de ces productions, jugée sur l’identification des concepts et des liens inter concepts, était globalement satisfaisante pour une première expérience. Influencée par de multiples facteurs internes et externes, la motivation des étudiants reste une grande problématique en milieu universitaire. Dans ce contexte, une planification rigoureuse d’activités pédagogiques diversifiées et actives est l’une des principales portes offertes à l’enseignant pouvant susciter cette motivation. PMID:29721145

Volcanoes and atmospheres; catastrophic influences on the planets

USGS Publications Warehouse

Kieffer, S.W.

1986-01-01

For a rare and brief instant in geologic time, we can imagine that the sulfurous, chromatic surface of Io (one of the satellites of Jupiter) lies quiet. Perhaps stars glisten brilliantly through the tenuous nigh sky. Here and there, thick icy fogs enshroud fumaroles where sulfur dioxide leaks from the underworld. Suddenly, a fissure splits the surface and billowing clouds of sulfurous gases and ice hurl orange and black ash into the atmosphere. Minute by minute, the intensity of the eruption builds; stars begin disappearing from the night sky. The rising plume inhales the nearby atmosphere, mixing it with the exhalations from the volcano. Particles of sulfur, sulfur dioxide snow and ash rise to 300 kilometers, later raining down across the planet a thousand kilometers away. 

Complexities in Shallow Magma Transport at Kilauea (Invited)

NASA Astrophysics Data System (ADS)

Swanson, D. A.

2013-12-01

The standard model of Kilauea's shallow plumbing system includes magma storage under the caldera and conduits in the southwest rift zone (SWRZ) and the east rift zone (ERZ). As a field geologist, I find that seemingly aberrant locations and trends of some eruptive vents indicate complexities in shallow magma transport not addressed by the standard model. This model is not wrong but instead incomplete, because it does not account for the development of offshoots from the main plumbing. These offshoots supply magma to the surface at places that tell us much about the complicated stress system within the volcano. Perhaps most readily grasped are fissures peripheral to the north and south sides of the caldera. Somehow magma can apparently be injected into caldera-bounding faults from the summit reservoir complex, but the process and pathways are unclear. Of more importance is the presence of fissures with ENE trends on the east side of the caldera, including Kilauea Iki. Is this a rift zone that forms an acute angle with the ERZ? I think there is another explanation: the main part of the ERZ has migrated ~5 km SSE during the past few tens of thousands of years owing to seaward movement of the south flank, but older parts of the rift zone can be reactivated. The fissures east of the caldera have the ERZ trend and may record such reactivation; this interpretation includes the location of the largest eruption (15th century) known from Kilauea. Whether or not this interpretation has validity, the question remains: what changes in the plumbing system allow magma to erupt east of the caldera? The SWRZ can be divided into two sections, the SWRZ proper and the seismically active part (SASWRZ) southeast of the SWRZ. The total width of both sections is ~4 km. The SWRZ might be migrating SSE, as is the ERZ. Fissures in the SWRZ proper trend SW. Fissures in the SASWRZ, however, have ENE trends like that of the ERZ, although, because of en echelon offsets, the fissure zone itself trends SW. Seismicity in the SASWRZ also trends SW. This complicated area is not adequately addressed by the standard model. Possibly stresses related to seaward spreading control surface fracture patterns in the SASWRZ, but stresses related to the summit reservoir control somewhat deeper magma movement. Perhaps the hyaloclastic zone, formed as Kilauea grew above sea level, separates the two stress layers. Whatever the explanation, the observations demand attention because of the disparity between fracture trend and magma movement. In the upper ERZ, surface fractures and eruptive fissures trend ENE, but the overall magma plumbing, as defined by seismicity and pit craters, trends SE. Again a layered stress system is one interpretation, with seaward migration of the ERZ superposed on the plumbing connecting the summit magma reservoir with the ERZ. Clearly this area demands close scrutiny, since most of the magma erupted from Kilauea passes through the upper ERZ. Dikes also intrude the Koa`e fault system, which connects the active ERZ with the SWRZ. Faults and fractures in the Koa`e and ERZ have the same ENE fracture trend and structural style. Vents in the Koa`e occur ~6 km west of the ERZ. Deformation measurements show that magma intrudes the Koa`e during eruptions in the adjacent ERZ. What drives the magma to move so far from well established conduits? Once more, the observations raise more questions than answers.

ARC Researchers at IEEE 2015 Vehicle Power and Propulsion Conference

Science.gov Websites

Sustainability of the Energy Storage Systems Thursday, October 22, 2015 14:00 PM - 16:00 PM Des Pins Room SS5-1 Influence of Battery Downsizing and SOC Operating Window on Battery Pack Performance in a Hybrid Electric

Pharmacothérapie de la dépression chez les aînés

PubMed Central

Frank, Christopher

2014-01-01

Résumé Objectif Discuter du traitement pharmacologique de la dépression chez les personnes âgées, y compris le choix des antidépresseurs, le titrage de la dose, la surveillance de la réponse et des effets secondaires et le traitement des cas réfractaires. Sources des données Les lignes directrices de 2006 de la Canadian Coalition for Seniors’ Mental Health sur l’évaluation et le traitement de la dépression ont servi comme source principale. Pour recenser les articles publiés après les lignes directrices, on a procédé à une recherche documentaire dans MEDLINE de 2007 à 2012 à l’aide des expressions en anglais depression, treatment, drug therapy et elderly. Message principal Le but du traitement devrait être la rémission des symptômes. L’amélioration des symptômes peut être surveillée en fonction des objectifs du patient qu’on a identifiés ou en se servant d’outils cliniques comme le Patient Health Questionnaire–9. On devrait envisager le traitement en 3 étapes: l’étape du traitement aigu pour obtenir la rémission des symptômes, une étape de continuation pour prévenir la récurrence d’un même épisode de la maladie (rechute) et une étape de maintien (prophylaxie) pour prévenir de futurs épisodes (récurrence). Le dosage initial devrait être la moitié de la dose de départ habituelle chez l’adulte et il devrait être titré régulièrement jusqu’à ce que le patient réponde, jusqu’à ce que la dose maximale soit atteinte ou encore que les effets secondaires en limitent l’augmentation. Parmi les effets secondaires fréquents, on peut mentionner les chutes, la nausée, les étourdissements, les céphalées et, moins communément, l’hyponatrémie et des changements dans l’intervalle QT. Des stratégies pour changer ou augmenter les antidépresseurs sont présentées. Les patients plus âgés devraient être traités pendant au moins un an à compter de l’observation d’une amélioration clinique et ceux qui ont une dépression récurrente ou des symptômes sévères devraient continuer le traitement indéfiniment. La prise en charge de situations particulières comme une dépression profonde ou une dépression avec psychose est discutée, y compris le recours à une thérapie électroconvulsive. Les critères pour demander une consultation en psychiatrie gériatrique sont indiqués; par ailleurs, de nombreux médecins de famille n’ont pas aisément accès à une telle ressource ou à d’autres stratégies cliniques non pharmacologiques. Conclusion L’efficacité de la pharmacothérapie de la dépression n’est pas considérablement influencée par l’âge. L’identification de la dépression, le choix du traitement approprié, le tritrage des médicaments, la surveillance des effets secondaires et la durée suffisante du traitement amélioreront les résultats pour les patients plus âgés.

[About Cryptophthalmos (2nd Czech Study)].

PubMed

Krásný, J; Čakrtová, M; Kletenský, J; Novák, V; Šach, J

To get acquainted with the 2nd Czech study about cryptophthamos and with self-surgical methods. The boy with unilateral complete cryptophthalmos of left eye was treated from 2 to 20 years. The girls was treated from 4 month to 5 year yet for right abortive cryptophthalmos with microblepharon and left complete type still waiting for solutions.Surgical methods and results: Authors present a surgical procedures for correction of the upper and lower eyelids and ocular anomalies both patients studied. Successful reconstruction of palpebral fissure took place in several stages at the boy. The surgical procedure gradually contained: the insertion of gradually increased convex concave circular-shaped implant (silicone ruber) due a modeling of palpebral fissure, an enucleation of rudimentary eye, a reconstruction of bottom palpebral fissure by retro-auricular skin graf and a releasing of the lower transitory fold by the cul-de-sac method. An adequate depth of palpebral fissure to allow perfect position of an aesthetic protesis. Enucleated eye was atypically shaped, remiding partly sand-glass clock. The cornea was replaced by thick fibrous membrane, the iris and the lens were not revealed. Gliomatic retina was detached nearly totaly and the optic nerv was rudimental. The repairing the upper lid coloboma of girl by a lid rotation flap reconstruction using the inferior eyelid was performed at the age 17 month. Corneal dermoid simultaneously removed (histologically verified). Upper conjunctival fornix was formed using the spherical covering foil (silicone rubber) before and after the reconstruction of the lid. Plastic reconstructions required the need for patient access without trying immediate effect. An important role played silicone rubber implants (elastomer medical grade) which used temporarily. cryptophthalmos, microblepharon, relief surgery, silicon ruber implants.

Supai salt karst features: Holbrook Basin, Arizona

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neal, J.T.

1994-12-31

More than 300 sinkholes, fissures, depressions, and other collapse features occur along a 70 km (45 mi) dissolution front of the Permian Supai Formation, dipping northward into the Holbrook Basin, also called the Supai Salt Basin. The dissolution front is essentially coincident with the so-called Holbrook Anticline showing local dip reversal; rather than being of tectonic origin, this feature is likely a subsidence-induced monoclinal flexure caused by the northward migrating dissolution front. Three major areas are identified with distinctive attributes: (1) The Sinks, 10 km WNW of Snowflake, containing some 200 sinkholes up to 200 m diameter and 50 mmore » depth, and joint controlled fissures and fissure-sinks; (2) Dry Lake Valley and contiguous areas containing large collapse fissures and sinkholes in jointed Coconino sandstone, some of which drained more than 50 acre-feet ({approximately}6 {times} 10{sup 4} m{sup 3}) of water overnight; and (3) the McCauley Sinks, a localized group of about 40 sinkholes 15 km SE of Winslow along Chevelon Creek, some showing essentially rectangular jointing in the surficial Coconino Formation. Similar salt karst features also occur between these three major areas. The range of features in Supai salt are distinctive, yet similar to those in other evaporate basins. The wide variety of dissolution/collapse features range in development from incipient surface expression to mature and old age. The features began forming at least by Pliocene time and continue to the present, with recent changes reportedly observed and verified on airphotos with 20 year repetition. The evaporate sequence along interstate transportation routes creates a strategic location for underground LPG storage in leached caverns. The existing 11 cavern field at Adamana is safely located about 25 miles away from the dissolution front, but further expansion initiatives will require thorough engineering evaluation.« less

Origins of feeding arteries of hepatocellular carcinoma located near the umbilical fissure of the left hepatic lobe: angiographic evaluation.

PubMed

Miyayama, Shiro; Yamashiro, Masashi; Shibata, Yoshihiro; Hashimoto, Masahiro; Yoshida, Miki; Tsuji, Kazunobu; Toshima, Fumihito; Matsui, Osamu

2012-12-01

To analyze the origins of the feeding arteries of hepatocellular carcinomas (HCCs) near the umbilical fissure of the left hepatic lobe. Twenty-eight HCCs with a mean ± SD tumor diameter of 3.4 ± 1.0 cm (range 1-4.4 cm) in contact with the right or left side of the umbilical fissure were treated by superselective transcatheter arterial chemoembolization (TACE). The origins of the tumor-feeding arteries were analyzed with arteriograms and computed tomography or cone-beam computed tomography images obtained during and 1 week after TACE. Twenty-one HCC lesions were located in segment 3 and seven were located in segment 4. Of 21 tumors in segment 3, 13 (61.9%) were supplied by the lateral inferior subsegmental artery (A3), three (14.3%) by the medial subsegmental artery (A4), three (14.3%) by both A4 and A3, one (4.8%) by a branch arising from the left lateral hepatic artery, and one (4.8%) by a branch of the right gastric artery. In particular, all tumor-feeding branches arising from A4 were the first branch of A4. Of seven tumors in segment 4, four (57.1%) were supplied by A4 and three (42.9%) by A3. In particular, all tumor-feeding branches arising from A3 were the first branch of A3. This study demonstrates crossover blood supply to HCC lesions located near the umbilical fissure, in addition to direct feeding from a separate branch. In particular, the first branch of the opposite subsegmental artery may feed tumors when crossover blood supply is present.

Non-destructive measurement of demineralization and remineralization in the occlusal pits and fissures of extracted 3rd molars with PS-OCT

NASA Astrophysics Data System (ADS)

Lee, Chulsung; Hsu, Dennis J.; Le, Michael H.; Darling, Cynthia L.; Fried, Daniel

2009-02-01

Previous studies have demonstrated that Polarization Sensitive Optical Coherence Tomography (PS-OCT) can be used to image the remineralization of early artificial caries lesion on smooth enamel surfaces of human and bovine teeth. However, most new dental decay is found in the pits and fissures of the occlusal surfaces of posterior dentition and it is in these high risk areas where the performance of new caries imaging devices need to be investigated. The purpose of this study was to demonstrate that PS-OCT can be used to measure the subsequent remineralization of artificial lesions produced in the pits and fissures of extracted 3rd molars. A PS-OCT system operating at 1310-nm was used to acquire polarization resolved images of occlusal surfaces exposed to a demineralizing solution at pH-4.5 followed by a fluoride containing remineralizing solution at pH-7.0 containing 2-ppm fluoride. The integrated reflectivity was calculated to a depth of 200-µm in the entire lesion area using an automated image processing algorithm. Although a well-defined surface zone was clearly resolved in only a few of the samples that underwent remineralization, the PS-OCT measurements indicated a significant (p<0.05) reduction in the integrated reflectivity between the severity of the lesions that were exposed to the remineralization solution and those that were not. The lesion depth and mineral loss were also measured with polarized light microscopy and transverse microradiography after sectioning the teeth. These results show that PS-OCT can be used to non-destructively monitor the remineralization potential of anti-caries agents in the important pits and fissures of the occlusal surface.

Performance of some diagnostic systems in the prediction of occlusal caries in permanent molars in 6- and 11-year-old children.

PubMed

Fennis-Ie, Y L; Verdonschot, E H; van't Hof, M A

1998-01-01

Attempts have been made to develop diagnostic methods which enable an early diagnosis of occlusal lesions which are not detectable by visual inspection. The aim of this study was to compare the performance of visual inspection focused on finding signs of fissure decalcification and discoloration, visual inspection upon fibre-optic transillumination (FOTI), and electrical conductance measurements (ECMs) in predicting the onset of occlusal caries in 6- and 11-year-old children. Fifty children aged 5-7 and 11-15 years, having first or second permanent molar teeth that were not exposed to the oral environment for more than half a year, participated in the study. Following baseline data recording, the diagnostic measurements were repeated six times at 6-month intervals over a period of 2.5 years. Data were collected at predefined sites in the fissures. During the study, 220 of the 652 sites, i.e. 75 of 197 molars in 31 of the 50 children were judged to require a sealant or a sealant restoration. Two examiners jointly decided on the decay status at the sites. Survival plots showed that ECMs were superior to FOTI and fissure discoloration in predicting the onset of occlusal caries, although the differences were small. ECM is a better predictor of occlusal caries than fissure discoloration and FOTI, although the differences among the performance of the three methods in this study were very small. A cost-effective analysis is envisaged to obtain insight into the practical value of ECMs in the prediction of occlusal caries and, thus, into the effectiveness of sealant application.

The effect of pit and fissure sealants on the detection of occlusal caries in vitro.

PubMed

Manton, D J; Messer, L B

2007-03-01

To compare, in vitro, the effect of placing opaque (OPS) and clear fluorescing (CFS) pit and fissure sealants (PFS) on the detection of occlusal caries (OCD). Occlusal surfaces of 67 extracted molars were examined under standardised conditions by 6 final year undergraduate dental students, using visual, bitewing radiography, transillumination (FOTI), laser fluorescence (LF) and tactile methods of caries detection. The teeth were then assigned randomly to two groups for PFS placement: OPS and CFS; then the OCD methods were repeated. Caries presence/absence was determined histologically on serial sections examined under stereo-microscopy (10x). Before PFS placement the sensitivity and specificity for the OCD methods were: visual: 68%, 71%; radiographic: 15%, 95%; FOTI: 36%, 93%; LF: 49%, 83% and tactile: 39%, 67%, respectively. After placement of OPS, the sensitivity of LF (20%) and visual (13%) methods decreased and specificity increased (93%, 98% respectively). Placement of CFS resulted in minor changes in sensitivity and specificity. Correlation (Spearman's Rho coefficients) between OCD methods and histological intra-dentinal caries for pre- PFS, OPS, and CFS were: visual: 0.38, 0.34, 0.33; FOTI: 0.42, 0.35, 0.43; and LF: 0.41, 0.30, and 0.45 respectively. The sensitivity of all OCD methods was low, as well as their correlation to the histological gold standard. Placing OPS further decreased the sensitivity of LF and visual methods, whereas placing CFS had little effect on all OCD methods. It is recommended that tactile detection of occlusal caries should be discontinued, and the probe used only to clean the pits and fissures gently for more accurate visual detection, or prior to pit and fissure sealant placement. Further research into the development of an affordable, robust, accurate and easy to use method for OCD is required.

Origins of Feeding Arteries of Hepatocellular Carcinoma Located Near the Umbilical Fissure of the Left Hepatic Lobe: Angiographic Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyayama, Shiro, E-mail: s-miyayama@fukui.saiseikai.or.jp; Yamashiro, Masashi; Shibata, Yoshihiro

2012-12-15

Purpose: To analyze the origins of the feeding arteries of hepatocellular carcinomas (HCCs) near the umbilical fissure of the left hepatic lobe. Methods: Twenty-eight HCCs with a mean {+-} SD tumor diameter of 3.4 {+-} 1.0 cm (range 1-4.4 cm) in contact with the right or left side of the umbilical fissure were treated by superselective transcatheter arterial chemoembolization (TACE). The origins of the tumor-feeding arteries were analyzed with arteriograms and computed tomography or cone-beam computed tomography images obtained during and 1 week after TACE.ResultsTwenty-one HCC lesions were located in segment 3 and seven were located in segment 4. Ofmore » 21 tumors in segment 3, 13 (61.9%) were supplied by the lateral inferior subsegmental artery (A3), three (14.3%) by the medial subsegmental artery (A4), three (14.3%) by both A4 and A3, one (4.8%) by a branch arising from the left lateral hepatic artery, and one (4.8%) by a branch of the right gastric artery. In particular, all tumor-feeding branches arising from A4 were the first branch of A4. Of seven tumors in segment 4, four (57.1%) were supplied by A4 and three (42.9%) by A3. In particular, all tumor-feeding branches arising from A3 were the first branch of A3. Conclusion: This study demonstrates crossover blood supply to HCC lesions located near the umbilical fissure, in addition to direct feeding from a separate branch. In particular, the first branch of the opposite subsegmental artery may feed tumors when crossover blood supply is present.« less

Two novel de novo mutations of KRT6A and KRT16 genes in two Chinese pachyonychia congenita pedigrees with fissured tongue or diffuse plantar keratoderma.

PubMed

Du, Zhen-Fang; Xu, Chen-Ming; Zhao, Yan; Liu, Wen-Ting; Chen, Xiao-Ling; Chen, Chun-Yue; Fang, Hong; Ke, Hai-Ping; Zhang, Xian-Ning

2012-01-01

Mutations in the KRT6A or KRT16 gene cause pachyonychia congenita type 1 (PC-1), while mutations in KRT16 or KRT6C underlie focal palmoplantar keratoderma (FPPK). A new classification system of PC has been adopted based on the mutated gene. PC rarely presents the symptoms of diffuse plantar keratoderma. Mutation in the tail domain of keratins is rarely reported. PC combined with fissured tongue has never been described. To investigate the genotype-phenotype correlations between clinical features and gene mutational sites in two unrelated southern Chinese PC pedigrees (one family presented with specific fissured tongue, the other with diffuse plantar keratoderma). The whole coding regions of the KRT6A/KRT16/KRT17/KRT6B genes were amplified and directly sequenced to detect the mutation. To confirm the effect of the IVS8-2A>C mutation in KRT6A at the mRNA level, total RNA from the plantar lesion of a patient was extracted and reverse-transcribed to cDNA for sequence analysis. Two novel de novo mutations, a splice acceptor site variant IVS8-2A>C (p.S487FfsX72) in KRT6A and a heterozygous substitution c.AA373_374GG (p.N125G) within exon 1 of KRT16, were found separately in the two PC families. Genotype-phenotype correlations among PC patients with codon-125 mutation in KRT16 were established, while the phenotypes caused by the IVS8-2A>C mutation in KRT6A need further studies to confirm the rare feature of fissured tongue.

Assessment of microleakage of class V restored by resin composite and resin-modified glass ionomer and pit and fissure resin-based sealants following Er:YAG laser conditioning and acid etching: in vitro study

PubMed Central

Luong, Emilie; Shayegan, Amir

2018-01-01

Aim The aim of this study was to make a comparison between microleakage of conventionally restored class V cavities using acid etchant and the ones conditioned by erbium-doped yttrium aluminum garnet (Er:YAG) laser, and also to assess and compare the effectiveness of enamel surface treatments of occlusal pits and fissures by acid etching and conditioned by Er:YAG laser-etch. Materials and methods Seventy-two extracted third molars were used in this study. The samples were divided into two major groups: class V cavities and pit and fissure sealants. Each subgroup was divided into conventional acid etching, Er:YAG laser conditioning and conventional acid etching, and combination with Er:YAG laser conditioning (n=12). The teeth were placed in 2% methylene blue dye solution, were sectioned, and were evaluated according to the dye penetration criteria. Two samples per subgroup were chosen for scanning electron microscopic (SEM) analysis. Results There was a significant difference between occlusal and cervical margin groups. Laser conventional composite cementum group showed more microleakage values compared to other groups. There was no significant difference between occlusal margin groups. However, there was a significant difference between cervical margin groups in terms of microleakage. In sealant groups, there was a significant difference between laser and conventional with/without laser treatment groups in terms of microleakage. Conclusion Based on the results reported in this study, it can be concluded that the application of the Er:YAG laser beneath the resin composite, the resin-modified glass ionomers (GIs), and the fissure sealant placement may be an alternative enamel and dentin etching method to acid etching. PMID:29881311

Long-term outcomes of Botulinum toxin in the treatment of chronic anal fissure: 5 years of follow-up.

PubMed

Barbeiro, Sandra; Atalaia-Martins, Catarina; Marcos, Pedro; Gonçalves, Cláudia; Canhoto, Manuela; Arroja, Bruno; Silva, Filipe; Cotrim, Isabel; Eliseu, Liliana; Santos, Antonieta; Vasconcelos, Helena

2017-03-01

Chronic anal fissure is a frequent and disabling disease, often affecting young adults. Botulinum toxin and lateral internal sphincterotomy are the main therapeutic options for refractory cases. Botulinum toxin is minimally invasive and safer compared with surgery, which carries a difficult post-operative recovery and fecal incontinence risk. The long-term efficacy of Botulinum toxin is not well known. The aim of this study was to evaluate the long-term efficacy and safety of Botulinum toxin in the treatment of chronic anal fissure. This was a retrospective study at a single center, including patients treated with Botulinum toxin from 2005 to 2010, followed over at least a period of 5 years. All patients were treated with injection of 25U of Botulinum toxin in the intersphincteric groove. The response was registered as complete, partial, refractory and relapse. Botulinum toxin was administered to 126 patients, 69.8% ( n  = 88) were followed over a period of 5 years. After 3 months, 46.6% ( n  = 41) had complete response, 23.9% ( n  = 21) had partial response and 29.5% ( n  = 26) were refractory. Relapse was observed in 1.2% ( n  = 1) at 6 months, 11.4% ( n  = 10) at 1 year, 2.3% ( n  = 2) at 3 years; no relapse at 5 years. The overall success rate was 64.8% at 5 years of follow-up. Botulinum toxin was well tolerated by all patients and there were no complications. The use of Botulinum toxin to treat patients with chronic anal fissure was safe and effective in long-term follow-up.

Seismic processes and migration of magma during the Great Tolbachik Fissure Eruption of 1975-1976 and Tolbachik Fissure Eruption of 2012-2013, Kamchatka Peninsula

NASA Astrophysics Data System (ADS)

Fedotov, S. A.; Slavina, L. B.; Senyukov, S. L.; Kuchay, M. S.

2015-12-01

Seismic and volcanic processes in the area of the northern group of volcanoes (NGV) in Kamchatka Peninsula that accompanied the Great Tolbachik Fissure Eruption (GTFE) of 1975-1976 and the Tolbachik Fissure Eruption (TFE, or "50 let IViS" due to anniversary of the Institute of Volcanology and Seismology, Far East Branch, Russian Academy of Sciences) of 2012-2013 and the seismic activity between these events are considered. The features of evolution of seismic processes of the major NGV volcanoes (Ploskii Tolbachik, Klyuchevskoy, Bezymannyi, and Shiveluch) are revealed. The distribution of earthquakes along depth, their spatial and temporal migration, and the relation of seismic and volcanic activity are discussed. The major features of seismic activity during the GTFE preparation and evolution and a development of earthquake series preceding the origin of the northern and southern breaks are described. The character of seismic activity between the GTFE and TFE is shown. The major peculiarities of evolution of seismic activity preceding and accompanying the TFE are described. The major magma sources and conduits of the NGV volcanoes are identified, as is the existence of a main conduit in the mantle and a common intermediate source for the entire NGV, the depth of which is 25-35 km according to seismic data. The depth of a neutral buoyancy layer below the NGV is 15-20 km and the source of areal volcanism of magnesian basalts northeast of the Klyuchevskoy volcano is located at depth of ~20 km. These data support the major properties of a 2010 geophysical model of magmatic feeding system of the Klyuchevskoy group of volcanoes. The present paper covers a wider NGV area and is based on the real experimental observations.

Reactive transport modeling of uranium 238 and radium 226 in groundwater of the Königstein uranium mine, Germany

NASA Astrophysics Data System (ADS)

Nitzsche, O.; Merkel, B.

Knowledge of the transport behavior of radionuclides in groundwater is needed for both groundwater protection and remediation of abandoned uranium mines and milling sites. Dispersion, diffusion, mixing, recharge to the aquifer, and chemical interactions, as well as radioactive decay, should be taken into account to obtain reliable predictions on transport of primordial nuclides in groundwater. This paper demonstrates the need for carrying out rehabilitation strategies before closure of the Königstein in-situ leaching uranium mine near Dresden, Germany. Column experiments on drilling cores with uranium-enriched tap water provided data about the exchange behavior of uranium. Uranium breakthrough was observed after more than 20 pore volumes. This strong retardation is due to the exchange of positively charged uranium ions. The code TReAC is a 1-D, 2-D, and 3-D reactive transport code that was modified to take into account the radioactive decay of uranium and the most important daughter nuclides, and to include double-porosity flow. TReAC satisfactorily simulated the breakthrough curves of the column experiments and provided a first approximation of exchange parameters. Groundwater flow in the region of the Königstein mine was simulated using the FLOWPATH code. Reactive transport behavior was simulated with TReAC in one dimension along a 6000-m path line. Results show that uranium migration is relatively slow, but that due to decay of uranium, the concentration of radium along the flow path increases. Results are highly sensitive to the influence of double-porosity flow. Résumé La protection des eaux souterraines et la restauration des sites miniers et de prétraitement d'uranium abandonnés nécessitent de connaître le comportement des radionucléides au cours de leur transport dans les eaux souterraines. La dispersion, la diffusion, le mélange, la recharge de l'aquifère et les interactions chimiques, de même que la décroissance radioactive, doivent être prises en compte pour obtenir des prédictions fiables concernant le transport des nucléides primaires dans les eaux souterraines. Ce papier montre la nécessité d'établir des stratégies de réhabilitation avant la fermeture de la mine d'uranium de Knigstein, près de Dresde (Allemagne). Des expériences de lessivage en colonne sur des carottes avec de l'eau enrichie en uranium fournissent des données sur le comportement de l'échange de l'uranium. La restitution de l'uranium a été observée après un lessivage par un volume supérieur à 20 fois celui des pores. Ce fort retard est dûà l'échange d'ions uranium positifs. Le code TReAC est un code de transport réactif en 1D, 2D et 3D, qui a été modifié pour prendre en compte la décroissance radioactive de l'uranium et les principaux nucléides descendants, et pour introduire l'écoulement dans un milieu à double porosité. TReAC a simulé de façon satisfaisante les courbes de restitution des expériences sur colonne et a fourni une première approche des paramètres de l'échange. L'écoulement souterrain dans la région de la mine de Knigstein a été simulé au moyen du code FLOWPATH. Le comportement du transport réactif a été simulé avec TReAC en une dimension, le long d'un axe d'écoulement long de 6000 m. Les résultats montrent que la migration de l'uranium est relativement lente ; mais du fait de la décroissance radioactive de l'uranium, la concentration en radium le long de cet axe augmente. Les résultats sont très sensibles à l'influence de l'écoulement en milieu à double porosité.

Eco-hydrology: Groundwater flow and site factors in plant ecology

NASA Astrophysics Data System (ADS)

Klijn, Frans; Witte, Jan-Philip M.

Résumé En écologie végétale, le site est un concept central. Un site, c'est l'endroit où une espèce végétale ou une communauté de plantes se développe le site assure un ensemble de conditions dans lesquelles elles vivent. Dans un matériau homogène à l'origine, l'écoulement gravitaire d'une nappe influence les conditions du site par l'intermédiaire de la distribution spatiale des nutriments et d'autres composés chimiques associés. Les remontées d'eau peuvent tout spécialement produire et maintenir les conditions du site essentielles pour différentes espèces et communautés de plantes relativement rares. Les écologues ont porté une attention accrue à ces remontées d'eau, en sorte qu'une coopération avec les hydrologues en a résulté, avec l'émergence d'une discipline propre, l'éco-hydrologie, à la limite des deux domaines scientifiques et liée au concept de site. Aux Pays-Bas, une classification des types d'eau, basée sur l'histoire de l'eau souterraine à proximité de la surface, a été mise en oeuvre pour constituer une base nationale de données géographiques sur les remontées d'eau d'intérêt écologique. Des analyses des correspondances des données de cette base, portant sur l'existence de certaines espèces de plantes, montrent que dans les sols sableux pauvres du Pléistocène la remontée d'eau explique très bien la présence de certaines espèces et communautés, alors que, dans les plaines fluviales et les régions de polders à sols argileux riches, l'influence de la remontée d'eau est masquée par l'importance des caractéristiques des sols. En conclusion donc, certaines espèces de plantes peuvent être utilisées comme des indicateurs de la remontée d'eau dans des diagnostiques et des levés de terrain rapides, mais à condition de prendre en permanence des précautions sur les limites de l'approche. Resumen En ecología botánica un concepto de gran importancia es el de emplazamiento, definido como el lugar que proporciona unas condiciones de vida adecuadas que permiten el crecimiento de una especie o una comunidad botánica. En un material inicialmente homogéneo, el flujo subterráneo gravífico influencia las condiciones del emplazamiento variando la distribución espacial de los nutrientes y de otros agentes químicos relevantes. En especial, el flujo ascendente puede producir y mantener una serie de condiciones que son esenciales para algunas especies y comunidades de plantas relativamente raras. La especial atención hacia este fenómeno ha dado lugar a una cooperación entre ecologistas e hidrogeólogos y a la aparición de una nueva disciplina - eco-hidrología -, en la frontera de los dos campos científicos. En Holanda, se ha usado una clasificación sencilla de tipos de agua para crear una base de datos, a nivel nacional, de lugares donde la presencia de flujos ascendentes pueda ser de interés ecológico. El análisis de correspondencias entre esta base de datos y los tipos de plantas existentes muestra que en los suelos arenosos pobres del Pleistoceno los flujos ascendentes explican la presencia de algunas especies y comunidades de plantas. Por el contrario, en las llanuras fluviales y pólders, con suelos más arcillosos, la influencia de estos flujos es despreciable frente a la relativa a las propias características de los suelos. Se concluye que las especies botánicas se pueden usar como indicadores de la presencia de flujo ascendente sólo en campañas preliminares, pero que el método presenta grandes limitaciones para su extensión a casos generales.

L'Apport des Faits Phonetiques au Developpement de la Comprehension Auditive en Langue Seconde (The Influence of Phonetic Skills on the Development of Listening Comprehension in a Second Language).

ERIC Educational Resources Information Center

Champagne-Muzar, Cecile

1996-01-01

Ascertains the influence of the development of receptive phonetic skills on the level of listening comprehension of adults learning French as a second language in a formal setting. Test results indicate substantial gains in phonetics by the experimental group and a significant difference between the performance of experimental and control groups.…

Assessment of quality and geochemical processes occurring in groundwaters near central air conditioning plant site in Trombay, Maharashtra, India.

PubMed

Tirumalesh, K; Shivanna, K; Sriraman, A K; Tyagi, A K

2010-04-01

This paper summarizes the findings obtained in a monitoring study to understand the sources and processes affecting the quality of shallow and deep groundwater near central air conditioning plant site in Trombay region by making use of physicochemical and biological analyses. All the measured parameters of the groundwaters indicate that the groundwater quality is good and within permissible limits set by (Indian Bureau of Standards 1990). Shallow groundwater is dominantly of Na-HCO(3) type whereas deep groundwater is of Ca-Mg-HCO(3) type. The groundwater chemistry is mainly influenced by dissolution of minerals and base exchange processes. High total dissolved solids in shallow groundwater compared to deeper ones indicate faster circulation of groundwater in deep zone preferably through fissures and fractures whereas groundwater flow is sluggish in shallow zone. The characteristic ionic ratio values and absence of bromide point to the fact that seawater has no influence on groundwater system.

Les psychoses de l’épileptique: approche clinique à propos d'un cas

PubMed Central

Charfi, Nada; Trigui, Dorsaf; Ben Thabet, Jihène; Zouari, Nasreddine; Zouari, Lobna; Maalej, Mohamed

2014-01-01

Pour discuter les liens entre épilepsie et psychose, les auteurs rapportent l'observation d'une fille âgée de 22 ans, traitée pour épilepsie fronto-temporale, adressée en psychiatrie pour des hallucinations sensorielles et cénesthésiques et un délire mystique et d'influence, apparus secondairement et non améliorés par le traitement antiépileptique. Les symptômes psychotiques, chez l’épileptique, peuvent entrer dans le cadre de psychoses intercritiques, post-critiques ou alternatives. Pour le cas rapporté, les symptômes psychotiques étaient intercritiques et chroniques. Il s'agissait vraisemblablement d'une psychose schizophréniforme. Dans ce type de psychose, une indifférence affective et une restriction des activités sont rarement rencontrés, alors que les fluctuations rapides de l'humeur sont fréquentes. Les thématiques délirantes sont assez souvent mystiques, alimentées par des hallucinations auditives et par des hallucinations visuelles inhabituelles. Les troubles négatifs sont rares. Les psychoses épileptiques n'ont pas été identifiées comme des entités nosographiques dans les systèmes de classification psychiatrique (DSM-IV et CIM-10), ce qui pose un problème de reconnaissance de ces troubles. Une collaboration entre psychiatre et neurologue devient ainsi nécessaire pour mieux comprendre cette comorbidité complexe, éviter les erreurs diagnostiques et optimiser la prise en charge. PMID:25309665

Effect of channelling on water balance, oxygen diffusion and oxidation rate in mine waste rock with an inclined multilayer soil cover

NASA Astrophysics Data System (ADS)

Song, Qing; Yanful, Ernest K.

2010-05-01

Engineered soil covers provide an option to mitigate acid rock drainage through reduced water flow and gaseous oxygen influx to underlying mine waste. Channels such as fissures, cracks or fractures developed in the barrier may influence the long-term performance of the soil cover. However, limited published information is available on the extent to which soil cover performance is impacted by these fissures and cracks. This study was conducted to investigate the effect of channelling in a barrier layer on water flow and oxygen transport in a soil cover. Two inclined (a slope of 20%) multilayer soil covers were examined under laboratory conditions. One cover had a 10-cm wide sand-filled channel in a compacted barrier layer (silty clay) at the upslope section, while the other cover was a normal one without the channel pathway. The soil covers were installed in plastic boxes measuring 120 cm × 120 cm × 25 cm (width × height × thickness). The sand-filled channel was designed to represent the aggregate of fissures and cracks that may be present in the compacted barrier. The soil covers were subjected to controlled drying and wetting periods selected to simulate field situation at the Whistle mine site near Capreol, Ontario, Canada. The measured results indicated that interflow decreased from 72.8% of the total precipitation in the soil cover without channel flow to 35.3% in the cover with channel flow, and percolation increased from zero in the normal soil cover to 43.0% of the total precipitation in the cover with channel flow. Gaseous oxygen transfer into the waste rock below the cover soils was 1091 times greater in the cover with channel than in the soil cover without channel. The channel pathway present in the barrier layer acted as a major passage for water movement and gaseous oxygen diffusion into the waste rock layer, thus decreasing the performance of the soil cover. The spacing of the channel with respect to the length of the test box is similar to those found in other published fracture networks. The distribution and partitioning of the water balance components would be expected to be similar to other situations with the same cover slope. This, of course, would depend on rainfall intensity.

Evolution of Northeast Atlantic Magmatic Continental Margins from an Ethiopian-Afar Perspective

NASA Astrophysics Data System (ADS)

England, R. W.; Cornwell, D. G.; Ramsden, A. M.

2014-12-01

One of the major problems interpreting the evolution of magmatic continental margins is that the structure which should record the pre-magmatic evolution of the rift and which potentially influences the character of the rifting process is partially or completely obscured by thick basalt lava flows and sills. A limited number of deep reflection seismic profiles acquired with tuned seismic sources have penetrated the basalts and provide an image of the pre-magmatic structure, otherwise the principle data are lower resolution wide-angle/refraction profiles and potential field models which have greater uncertainties associated with them. In order to sidestep the imaging constraints we have examined the Ethiopian - Afar rift system to try to understand the rifting process. The Main Ethiopian rift contains an embryonic magmatic passive margin dominated by faulting at the margins of the rift and en-echelon magmatic zones at the centre. Further north toward Afar the rift becomes in-filled with extensive lava flows fed from fissure systems in the widening rift zone. This rift system provides, along its length, a series of 'snapshots' into the possible tectonic evolution of a magmatic continental margin. Deep seismic profiles crossing the NE Atlantic margins reveal ocean dipping reflector sequences (ODRS) overlying extended crust and lower crustal sill complexes of intruded igneous rock, which extend back beneath the continental margin. The ODRS frequently occur in fault bounded rift structures along the margins. We suggest, by analogy to the observations that can be made in the Ethiopia-Afar rift that these fault bounded basins largely form at the embryonic rift stage and are then partially or completely filled with lavas fed from fissures which are now observed as the ODRS. Also in the seismic profiles we identify volcanic constructs on the ODRS which we interpret as the equivalent of the present day fissure eruptions seen in Afar. The ocean ward dip on the ODRS is predominantly the result of post-eruption differential subsidence, as opposed to syn-eruption extension. The timing of intrusion of the lower crustal sill complexes remains unclear but they are most likely to have been emplaced as the supply of magma increased, which implies they are a late stage addition.

Volcanism and hydrothermalism on a hotspot-influenced ridge: Comparing Reykjanes Peninsula and Reykjanes Ridge, Iceland

NASA Astrophysics Data System (ADS)

Pałgan, Dominik; Devey, Colin W.; Yeo, Isobel A.

2017-12-01

Current estimates indicate that the number of high-temperature vents (one of the primary pathways for the heat extraction from the Earth's mantle) - at least 1 per 100 km of axial length - scales with spreading rate and should scale with crustal thickness. But up to present, shallow ridge axes underlain by thick crust show anomalously low incidences of high-temperature activity. Here we compare the Reykjanes Ridge, an abnormally shallow ridge with thick crust and only one high-temperature vent known over 900 km axial length, to the adjacent subaerial Reykjanes Peninsula (RP), which is characterized by high-temperature geothermal sites confined to four volcanic systems transected by fissure swarms with young (Holocene) volcanic activity, multiple faults, cracks and fissures, and continuous seismic activity. New high-resolution bathymetry (gridded at 60 m) of the Reykjanes Ridge between 62°30‧N and 63°30‧N shows seven Axial Volcanic Ridges (AVR) that, based on their morphology, geometry and tectonic regime, are analogues for the volcanic systems and fissure swarms on land. We investigate in detail the volcano-tectonic features of all mapped AVRs and show that they do not fit with the previously suggested 4-stage evolution model for AVR construction. Instead, we suggest that AVR morphology reflects the robust or weak melt supply to the system and two (or more) eruption mechanisms may co-exist on one AVR (in contrast to 4-stage evolution model). Our interpretations indicate that, unlike on the Reykjanes Peninsula, faults on and around AVRs do not cluster in orientation domains but all are subparallel to the overall strike of AVRs (orthogonal to spreading direction). High abundance of seamounts shows that the region centered at 62°47‧N and 25°04‧W (between AVR-5 and -6) is volcanically robust while the highest fault density implies that AVR-1 and southern part of AVR-6 rather undergo period of melt starvation. Based on our observations and interpretations we expect all of the AVRs on Reykjanes Ridge to be hydrothermally active but morphological and hydrographic settings of this ridge may cause hydrothermal plumes to be quickly dispersed and diluted due to exposure to strong bottom currents. Therefore, combined CTD and autonomous vehicles surveys are probably the most efficient methods for hydrothermal exploration along the Reykjanes Ridge.

Dissociative Experiences and Vividness of Auditory Imagery

ERIC Educational Resources Information Center

Pérez-Fabello, María José; Campos, Alfredo

2017-01-01

The relationship between dissociation and auditory imagery were assessed, 2 variables that sometime influence on artistic creativity. A total of 170 fine arts undergraduates (94 women and 76 men) received 2 dissociation questionnaires--the Dissociative Ability Scale (DAS), and the Dissociative Experiences Scale (DES)--and 2 auditory imagery…

Fluoride content and distribution pattern in groundwater of eastern Yunnan and western Guizhou, China.

PubMed

Luo, Kunli; Liu, Yonglin; Li, Huijie

2012-02-01

For study, the fluoride (F) content and distribution pattern in groundwater of eastern Yunnan and western Guizhou fluorosis area in southwestern China, the F content of 93 water samples [groundwater (fissure water, cool spring, and hot springs), rivers water] and 60 rock samples were measured. The result shows the F content of the fissure water and cold spring water is 0.027-0.47 mg/L, and river water is 0.048-0.224 mg/L. The F content of hot spring water is 1.02-6.907 mg/L. The drinking water supplied for local resident is mainly from fissure water, cool spring, and river water. And the F content in all of them is much lower than the Chinese National Standard (1.0 mg/L), which is the safe intake of F in drinking water. The infected people in eastern Yunnan and western Guizhou fluorosis area have very little F intake from the drinking water. The hot spring water in fluorosis area of eastern Yunnan and western Guizhou, southwest China has high F content, which is not suitable for drinking. © Springer Science+Business Media B.V. 2011

Normative findings for periocular anthropometric measurements among Chinese young adults in Hong Kong.

PubMed

Jayaratne, Yasas S N; Deutsch, Curtis K; Zwahlen, Roger A

2013-01-01

Measurement of periocular structures is of value in several clinical specialties including ophthalmology, optometry, medical and clinical genetics, oculoplastic surgery, and traumatology. Therefore we aimed to determine the periocular anthropometric norms for Chinese young adults using a noninvasive 3D stereophotography system. Craniofacial images using the 3dMDface system were acquired for 103 Chinese subjects (51 males and 52 females) between the ages of 18 and 35 years. Anthropometric landmarks were identified on these digital images according to standard definitions, and linear distances between these landmarks were calculated. It was found that ocular measurements were significantly larger in Chinese males than females for intercanthal width, biocular width, and eye fissure lengths. No gender differences were found in the eye fissure height and the canthal index which ranged between 43 and 44. Both right and left eye fissure height-length ratios were significantly larger in females. This is the first study to employ 3D stereophotogrammetry to create a database of anthropometric normative data for periocular measurements. These data would be useful for clinical interpretation of periocular pathology and serve as reference values when planning aesthetic and posttraumatic surgical interventions.

Lava flow hazards-An impending threat at Miyakejima volcano, Japan

NASA Astrophysics Data System (ADS)

Cappello, Annalisa; Geshi, Nobuo; Neri, Marco; Del Negro, Ciro

2015-12-01

The majority of the historic eruptions recorded at Miyakejima volcano were fissure eruptions that occurred on the flanks of the volcano. During the last 1100 years, 17 fissure eruptions have been reported with a mean interval of about 76-78 years. In the last century, the mean interval between fissure eruptions decreased to 21-22 years, increasing significantly the threat of lava flow inundations to people and property. Here we quantify the lava flow hazards posed by effusive eruptions in Miyakejima by combining field data, numerical simulations and probability analysis. Our analysis is the first to assess both the spatiotemporal probability of vent opening, which highlights the areas most likely to host a new eruption, and the lava flow hazard, which shows the probabilities of lava-flow inundation in the next 50 years. Future eruptive vents are expected in the vicinity of the Hatchodaira caldera, radiating from the summit of the volcano toward the costs. Areas more likely to be threatened by lava flows are Ako and Kamitsuki villages, as well as Miike port and Miyakejima airport. Thus, our results can be useful for risk evaluation, investment decisions, and emergency response preparation.

Characterising the biophysical properties of normal and hyperkeratotic foot skin.

PubMed

Hashmi, Farina; Nester, Christopher; Wright, Ciaran; Newton, Veronica; Lam, Sharon

2015-01-01

Plantar foot skin exhibits unique biophysical properties that are distinct from skin on other areas of the body. This paper characterises, using non-invasive methods, the biophysical properties of foot skin in healthy and pathological states including xerosis, heel fissures, calluses and corns. Ninety three people participated. Skin hydration, elasticity, collagen and elastin fibre organisation and surface texture was measured from plantar calluses, corns, fissured heel skin and xerotic heel skin. Previously published criteria were applied to classify the severity of each skin lesion and differences in the biophysical properties compared between each classification. Calluses, corns, xerotic heel skin and heel fissures had significantly lower levels of hydration; less elasticity and greater surface texture than unaffected skin sites (p < 0.01). Some evidence was found for a positive correlation between hydration and elasticity data (r ≤ 0.65) at hyperkeratotic sites. Significant differences in skin properties (with the exception of texture) were noted between different classifications of skin lesion. This study provides benchmark data for healthy and different severities of pathological foot skin. These data have applications ranging from monitoring the quality of foot skin, to measuring the efficacy of therapeutic interventions.

Glass ionomer ART sealant and fluoride-releasing resin sealant in fissure caries prevention – results from a randomized clinical trial

PubMed Central

2014-01-01

Background The relative performance of ART sealant and fluoride-releasing resin sealant in preventing fissure caries in permanent molars was compared in a randomized clinical trial conducted in southern China (ClinicalTrials.gov NCT01829334). Methods After obtaining ethical approval, healthy schoolchildren who had permanent first molars with occlusal fissures which were sound but deep or presented with only incipient caries were recruited for the study. Included molars were randomly allocated into one of four parallel study groups in units of left/right teeth per mouth. Two of the four groups adopted the methods of ART or fluoride-releasing resin sealant placement while the other two groups adopted the topical fluoride application methods. Fissure status of the molars in each group was evaluated every 6 months. Development of dentine caries and sealant retention over 24 months in the molars in the two sealant-using groups was compared in this report. Outcome on cost-effectiveness of all four groups over 36 months will be reported elsewhere. Results At baseline, a total of 280 children (383 molars) with mean age 7.8 years were involved for the two sealant groups. After 24 months, 261 children (357 molars) were followed. Proportions of molars with dentine caries were 7.3% and 3.9% in the ART sealant and fluoride-releasing resin sealant groups, respectively (chi-square test, p = 0.171). Life-table survival analysis showed that sealant retention (full and partial) rate over 24 months for the resin sealant (73%) was significantly higher than that (50%) for the ART sealant (p < 0.001). Molar survival (no development of dentine caries) rates in the ART sealant (93%) and fluoride-releasing resin sealant (96%) groups were not significantly different (p = 0.169). Multilevel logistic regression (GEE modeling) accounting for the effects of data clustering and confounding factors confirmed this finding. Conclusions Though the retention of fluoride-releasing resin sealant was better than that of the ART sealant, their effectiveness in preventing fissure caries in permanent molars did not differ significantly over 24 months. ART sealants could be a good alternative when and where resources for resin sealant placement are not readily available. PMID:24886444

Low-frequency collective dynamics in deep eutectic solvents of acetamide and electrolytes: a femtosecond Raman-induced Kerr effect spectroscopic study.

PubMed

Biswas, Ranjit; Das, Anuradha; Shirota, Hideaki

2014-10-07

In this study, we have investigated the ion concentration dependent collective dynamics in two series of deep eutectic solvent (DES) systems by femtosecond Raman-induced Kerr effect spectroscopy, as well as some physical properties, e.g., shear viscosity (η), density (ρ), and surface tension (γ). The DES systems studied here are [0.75CH3CONH2 + 0.25{f KSCN + (1 - f )NaSCN}] and [0.78CH3CONH2 + 0.22{f LiBr + (1 - f )LiNO3}] with f = 0, 0.2, 0.4, 0.6, 0.8, and 1.0. γ of these DES systems shows near insensitivity to f, while ρ shows a moderate dependence on f. Interestingly, η exhibits a strong dependence on f. In the low-frequency Kerr spectra, obtained via the Fourier transform of the collected Kerr transients, a characteristic band at ∼70 cm(-1) is clear in [0.78CH3CONH2 + 0.22{f LiBr + (1 - f )LiNO3}] DES especially at the larger f. The band is attributed to the intermolecular hydrogen bond of acetamide. Because of less depolarized Raman activities of intermolecular/interionic vibrational motions, which are mostly translational (collision-induced or interaction-induced) motions, of spherical ions, the intermolecular hydrogen-bonding band is clearly observed. In contrast, the intermolecular hydrogen-bonding band is buried in the other intermolecular/interionic vibrational motions, which includes translational and reorientational (librational) motions and their cross-terms, in [0.75CH3CONH2 + 0.25{f KSCN + (1 - f )NaSCN}] system. The first moment (M1) of the intermolecular/interionic vibrational band in these DES systems is much higher than that in typical neutral molecular liquids and shows a weak but contrasting dependence on the bulk parameter √γ/ρ. The time constants for picosecond overdamped Kerr transients in both the DES systems, which are obtained on the basis of the analysis fitted by a triexponential function, are rather insensitive to f for both the DES systems, but all the three time constants (fast: ∼1-3 ps; intermediate: ∼7-20 ps; and slow: ∼100 ps) are different between the [0.78CH3CONH2 + 0.22{f LiBr + (1 - f )LiNO3}] and [0.75CH3CONH2 + 0.25{f KSCN + (1 - f )NaSCN}] systems. These results indicate that the intermolecular/interionic interactions in DES systems is strongly influenced by the ionic species present in these DES systems.

Modelisation de la Propagation des Ondes Sonores dans un Environnement Naturel Complexe

NASA Astrophysics Data System (ADS)

L'Esperance, Andre

Ce travail est consacre a la propagation sonore a l'exterieur dans un environnement naturel complexe, i.e. en presence de conditions reelles de vent, de gradient de temperature et de turbulence atmospherique. Plus specifiquement ce travail comporte deux objectifs. D'une part, il vise a developper un modele heuristique de propagation sonore (MHP) permettant de prendre en consideration l'ensemble des phenomenes meteorologiques et acoustiques influencant la propagation du son a l'exterieur. D'autre part, il vise a identifier dans quelles circonstances et avec quelle importance les conditions meteorologiques interviennent sur la propagation sonore. Ce travail est divise en cinq parties. Apres une breve introduction identifiant les motivations de cette etude (chapitre 1), le chapitre 2 fait un rappel des travaux deja realises dans le domaine de la propagation du son a l'exterieur. Ce chapitre presente egalement les bases de l'acoustique geometrique a partir desquelles ont ete developpees la partie acoustique du modele heuristique de propagation. En outre, on y decrit comment les phenomenes de refraction et de turbulence atmospherique peuvent etre consideres dans la theorie des rayons. Le chapitre 3 presente le modele heuristique de propagation (MHP) developpe au cours de cet ouvrage. La premiere section de ce chapitre decrit le modele acoustique de propagation, modele qui fait l'hypothese d'un gradient de celerite lineaire et qui est base sur une solution hybride d'acoustique geometrique et de theorie des residus. La deuxieme section du chapitre 3 traite plus specifiquement de la modelisation des aspects meteorologiques et de la determination des profils de celerite et des index de fluctuation associes aux conditions meteorologiques. La section 3 de ce chapitre decrit comment les profils de celerite resultants sont linearises pour les calculs dans le modele acoustique, et finalement la section 4 donne les tendances generales obtenues par le modele. Le chapitre 4 decrit les compagnes de mesures qui ont ete realisees a Rock-Spring (Pennsylvanie, Etats -Unis) au cours de l'ete 90 et a Bouin (Vendee, France) au cours de l'automne 91. La campagne de mesure de Rock -Spring a porte plus specifiquement sur les effets de la refraction alors que la campagne de Bouin a prote plus specifiquement sur les effets de la turbulence. La section 4.1 decrit les equipements et le traitement des donnees meteorologiques realisees dans chaque cas et la section 4.2 fait de meme pour les resultats acoustiques. Finalement, le chapitre 5 compare les resultats experimentaux obtenus avec ceux donnes par le MHP, tant pour les resultats meteorologiques que pour les resultats acoustiques. Des comparaisons avec un autre modele (le Fast Field Program) sont egalement presentees.

Le rôle médiateur du fonctionnement familial dans la relation entre l’adversité familiale et l’adaptation sociale des enfants d’âge préscolaire1

PubMed Central

Felli, M. C.; Parent, S.; Zelazo, P. D.; Tremblay, R. E.; Séguin, J. R.

2017-01-01

Résumé À la petite enfance, l’adaptation sociale de l’enfant dépend en partie des risques auxquels il est exposé dans son environnement. Toutefois, les mécanismes par lesquels les facteurs de risque opèrent leurs influences sur l’adaptation sociale de l’enfant sont peu documentés. Ainsi, cette étude examine dans un premier temps l’effet principal de l’adversité familiale, un cumul de facteurs de risque, sur les problèmes de comportement intériorisés et extériorisés, ainsi que sur la sécurité d’attachement des enfants d’âge préscolaire. Dans un deuxième temps, elle évalue le rôle médiateur du fonctionnement familial dans le lien entre l’adversité familiale et les problèmes de comportement de même qu’entre l’adversité familiale et la sécurité d’attachement des enfants d’âge préscolaire. Les 572 participants à l’étude (n=572) sont âgés entre cinq et 42 mois lors des mesures de l’adversité familiale et de 42 mois lors de la mesure des problèmes de comportement et du fonctionnement familial. Quatre-vingt d’entre eux (n=80) ont fait l’objet d’une mesure de sécurité d’attachement à 48 mois. Les résultats indiquent, d’abord, un effet principal de l’adversité familiale sur les problèmes de comportement intériorisés et extériorisés. Un effet médiateur significatif du fonctionnement familial est ensuite rapporté dans le lien entre l’adversité familiale et les problèmes de comportement intériorisés et extériorisés. Aucun effet significatif n’est observé pour la sécurité d’attachement des enfants de 48 mois. PMID:28567062

Genetic diversity and population structure of an insular tree, Santalum austrocaledonicum in New Caledonian archipelago.

PubMed

Bottin, L; Verhaegen, D; Tassin, J; Olivieri, I; Vaillant, A; Bouvet, J M

2005-06-01

We present a study of the genetic diversity and structure of a tropical tree in an insular system. Santalum austrocaledonicum is endemic to the archipelago of New Caledonia and is exploited for oil extraction from heartwood. A total of 431 individuals over 17 populations were analysed for eight polymorphic microsatellite loci. The number of alleles per locus ranged from 3 to 33 and the observed heterozygosity per population ranged from 0.01 in Mare to 0.74 in Ile des Pins. The genetic diversity was lowest in the most recent islands, the Loyautes, and highest in the oldest island, Grande Terre, as well as the nearby small Ile des Pins. Significant departures from panmixia were observed for some loci-population combinations (per population FIS = 0-0.03 on Grande-Terre and Ile des Pins, and 0-0.67 on Loyautes). A strong genetic differentiation among all islands was observed (FST = 0.22), and the amount of differentiation increased with geographic distance in Iles Loyaute and in Grande Terre. At both population and island levels, island age and isolation seem to be the main factors influencing the amount of genetic diversity. In particular, populations from recent islands had large average FIS that could not be entirely explained by null alleles or a Wahlund effect. This result suggests that, at least in some populations, selfing occurred extensively. Conclusively, our results indicate a strong influence of insularity on the genetic diversity and structure of Santalum austrocaledonicum.

Tephra productivity and eruption flux of the subglacial Katla volcano, Iceland

NASA Astrophysics Data System (ADS)

Óladóttir, Bergrún Arna; Sigmarsson, Olgeir; Larsen, Guðrún

2018-07-01

The influence of the mode of magma ascent on eruption fluxes is uncertain beneath active volcanoes. To study this, the subglacial volcano Katla, Iceland, whichhas produced abundant tephra through the Holocene, has been investigated through volume estimations of the largest eruptions from the last 3500 years. Tephra volume measurements allow tephra productivity and their variation through time to be estimated. By adding the volume of lava from effusive eruptions, the total eruption flux is obtained. Tephra productivity shows variations with time, ranging from 2.0 km3/century, during the prehistoric period examined, to 0.7 km3/century, during historical time (after 939 CE). However, the average eruption flux remained unchanged ( 2.2 km3/century) during the studied 3500 years due to the large lava produced during the Eldgjá flood basalt eruption (939 CE). Following the Eldgjá event, tephra production declined and also eruption frequency, decreasing from 5.6-2.0 eruptions/century. Magma ascending vertically to the glacier -covered volcano results in explosive phreatomagmatic eruptions and tephra formation, whereas magma transferred in a laterally extended dyke leads to predominant fissural eruptions outside the glacier (e.g., Eldgjá). The mode of magma ascent thus exerts control on the eruption frequency and the volcanic style at Katla volcano without affecting the long-term eruption flux. A uniform increase in cumulative magma volume from Katla suggests a time-integrated steady-state behavior over the last 3500 years. Finally, although the large fissural eruption of Eldgjá lowered the following eruption frequency, it only temporarily affected the time averaged eruption flux of Katla.

Study in a UHF electromagnetic resonant cavity of a bubble field induced by ultrasonic cavitation

NASA Astrophysics Data System (ADS)

Labouret, S.; Frohly, J.

2000-06-01

A method founded on the follow-up of an electromagnetic cavity resonant frequency working round 390 MHz has been carried out in order to measure the void rates of bubble field induced by a 308 kHz ultrasonic cavitation in liquids. This method can detect void rates as low as 2× 10^{-5}. The experimental set up permits to study the influence of some experimental parameters on the void rate, such as the acoustic power, the acoustic irradiation duration, and the dissolved gas concentration in the liquid. Moreover, an estimation of the bubble size distribution is obtained. The extension of the method to open resonators and the possibility to observe the fast evolutions of the void rate are considered. Une méthode basée sur le suivi de la fréquence de résonance d'une cavité électromagnétique fonctionnant autour de 390 MHz a été mise au point et appliquée à la mesure du taux de vide créé dans un liquide par cavitation ultrasonore à 308 kHz. Cette méthode permet de détecter des taux de vide de l'ordre de 2× 10^{-5}. Le dispositif expérimental construit permet d'étudier l'influence de plusieurs paramètres : pression acoustique, durée d'irradiation acoustique, concentration en gaz dans le liquide. De plus, une estimation de la distribution en tailles des bulles est obtenue lorsque le liquide est saturé en gaz. L'adaptation de cette méthode à des résonateurs ouverts est abordée, et les possibilités d'observer des variations très rapides du taux de vide avec une résolution temporelle bien inférieure à la microseconde sont envisagées.

Stone decay assessment of the Madrid's Royal Palace (Spain) by means of ultrasound and magnetometric prospection

NASA Astrophysics Data System (ADS)

Fort, R.; Alvarez de Buergo, M.

2012-04-01

The architrave of the entablature of the 4 façades of the Palace was built in a limestone known as Colmenar stone (biomicrite), a traditional material used for construction in Madrid. This stone shows such petrophysical properties that make it resistant to decay processes. Despite its high quality, the ashlars of the architrave have undergone fissuring processes resulting on fragments fall, some of them being blocks weighing more than 300 Kg, with the consequent risk for visitors and passers-by. Fissures were caused by the presence of metallic elements (iron-based) used to tie ashlars. These elements, which could have performed properly in absence of water, underwent oxidation processes due to the water entrance, exerting significant pressures inside the stone that derive into fractures with their planes being almost parallel to the façade surface. Once verified that the presence of these metallic elements, and their oxidation, was the cause of the ashlars fissuring, an inspection of the building façades architrave was performed by using two portable and non destructive techniques: magnetometry for detecting iron elements, and ultrasound velocity prospection for detecting non visible stone fissures behind the surface. This survey will allow defining the guidelines for a restoration intervention. The inspection of the architrave consisted of analysing around 1100 ashlars (circa 600 meters long were surveyed), during a lapse of time of one year, in 4 survey campaigns, one for each façade, with the aid of a mobile and self-operating that allows to reach up to 40 m high. Results from the magnetometry prospection made possible to locate metallic elements (flat bars and cramps), and sometimes the flat bars overlapping. Such bars are usually located at 3-5 cm deep from the surface, just below the freeze and in a case cut in the architrave limestone. In the areas of flat bars overlapping, a depth from the surface into the façade of 8-10 cm was measured. Such bars were several meters long, tieing several ashlars, from 55 to 65 mm wide, and 15-20 mm thick. In vaulted areas of the frieze, iron beams were detected, of around 9 cm thick, as well as iron angle bars behind the mentioned iron beams, vertically arranged and going through the architrave. The ultrasound propagation velocity survey in all the architrave ashlars was carried out by means of the indirect or surface mode, using a measuring net of 15 cm side and 20 to 30 readings in each element. Results obtained allowed detecting fissures inside the ashlars non visible at the stone surface. Main fissures were located in areas of cramp-stone coupling. Therefore, this technique was sucessful in locating architrave ashlars with risk of fall, and thus it made possible to plan the structural intervention to consolidate these elements by micro reinforcement with stainless materials (e.g. glass fiber).

La projection par plasma : une revue

NASA Astrophysics Data System (ADS)

Fauchais, P.; Grimaud, A.; Vardelle, A.; Vardelle, M.

The quality of a plasma sprayed coating depends on numerous parameters that start to be understood due to the recent progresses in modelling and measurement techniques for plasma jets, momentum, heat and mass transfers between plasma and particles, the way the particules splat and cool down upon impact on the substrate or the previously deposited layers. In this paper, first are recalled the used measurement techniques and their limitations both for plasma jets and particles in flight. Then are underlined the importance of the different phenomena envolved in the transfers between plasma and particles such as steep temperature and chemical species density gradients around the particles, heat propagation phenomenon especially for ceramic particles and the connected evaporation effect, rarefaction effect which occurs even at atmospheric pressure. The problems related to the size and injection velocity distributions which determine the trajectory distributions and the heat treatments undergone by the particles are treated. The study of plasma generation shows on one hand for d.c. arc plasma torches the drastic influence on the plasma jets lengths and diameters of the gas injection chamber design, the gas nature, the design of the arc chamber and nozzle, the surrounding atmosphere (especially air pumping which cools down very fast the plasma) and on the other hand for RF plasmas the importance of the particle injection design to avoid the coupling between the RF discharge and the carrier gas with the particles. All these points are illustrated with examples of coatings of alumina, zirconia carbide and nickel particles. The way the particles splat is then studied with the chemical reactions in flight, the fast quenching of the particles and the resulting cristalline structures, the coating adhesion and also the residual stesses and their control through that of the temperature gradients into the coatings during spraying. At last a few actual and potential applications are presented in the fields of aeronautics and mechanics. La qualité d'un dépôt projete par plasma dépend de nombreux paramètres que l'on commence à mieux appréhender du fait des progrès de la modélisation et de la métrologie tant des écoulements plasmas que des transferts plasma-particules ou que des conditions d'écrasement et de refroidissement des particules lors de leur impact sur le substrat ou les couches déjà déposées. Les techniques de mesure utilisdes et leurs limitations sont d'abord rappelées tant pour les jets de plasma que pour les particules en vol et l'importance des différents phénomènes intervenant dans les transferts plasma-particules est soulignée : gradients de température et de concentration d'espèces chimiques très élevés autour des particules, effets de propagation de la chaleur, notamment pour les particules céramiques, effet d'évaporation, effet de raréfaction sensible dès la pression atmosphérique. Les problèmes de distribution de taille et de vitesse d'injection des particules sont également abordés car ils conditionnent les distributions de trajectoires et donc le traitement des particules dans le jet de plasma. La génération du plasma montre d'une part 1'influence considérable de l'injection du gaz, de sa nature, du dessin de la chambre d'arc et de la tuyère ainsi que du pompage de l'air ambiant sur la longueur des jets de plasma d'arc et d'autre part les problèmes d'injection pour éviter le couplage avec la décharge dans les jets de plasmas R.E Tout ceci est illustré avec des exemples de dépôt d'alumine, de zircone, de cermet carbure et de nickel. L'écrasement des particules est ensuite abordé avec les problèmes de réactions chimiques, de trempe ultra-rapide et donc de structure cristalline des dépôts, d'adhdsion mais aussi de containtes résiduelles et de leur contrôle via les gradients de température dans les dépôts pendant le tir. Enfin quelques applications actuelles sont présentées notamment pour l'aéronautique et la mécanique.

Étude par diffraction des rayons X de la nitruration plasma d'un acier 304L Influence sur l'oxydation à 1000 ^{circ}C

NASA Astrophysics Data System (ADS)

Marot, L.; Buscail, H.; Straboni, A.; Riffard, F.; Caudron, E.; Cueff, R.

2002-07-01

This work presents the influence of various nitridation parameters on the 304L steel oxidation at 1000 ^{circ}C, in air under atmospheric pressure. Nitridation temperatures were ranging between 300 ^{circ}C and 430 ^{circ}C with exposure times lasting from 2 to 8 hours. At 300 and 430 ^{circ}C, the nitridation treatment leads to the solid solution surface formation γ-N without any nitride formation. After oxidation at 1000 ^{circ}C of blank specimens, X ray diffraction reveals the FeCr2O4 spinel formation. This oxide does not act as a good diffusion barrier. With nitrogen treated specimens, the higher the nitridation temperature is and the longer the exposure time is, better is the oxidation behaviour at 1000 ^{circ}C. We then observe that the Cr{1,3}Fe{0,7}O3 oxide is more present in the oxide sale from the very beginning of the oxidation test which is correlated to a final lower mass gain. Cette étude porte sur l'influence des paramètres de nitruration plasma sur l'oxydation de l'acier 304L à 1000 ^{circ}C, sous air, à la pression atmosphérique. Les températures employées lors de la nitruration ont été de 300 ^{circ}C et 430 ^{circ}C pour des durées de nitruration variant entre 2 et 8 heures. A 300 et 430 ^{circ}C, la nitruration conduit à la formation d'une solution solide γ-N en surface sans provoquer la formation de nitrures. Après oxydation à 1000 ^{circ}C du 304L non nitruré, la diffraction des rayons X révèle la formation d'une couche de type spinelle FeCr2O4 qui ne semble pas jouer le rôle de barrière de diffusion. Pour les échantillons préalablement nitrurés, plus la température de nitruration est élevée et plus la durée du traitement est longue, meilleur est le comportement en oxydation. Nous observons alors l'oxyde Cr{1,3}Fe{0,7}O3 en proportion importante dès le début de l'oxydation et une prise de masse finale plus faible.

Ultrasound-guided intrapleural positioning of pleural catheters: influence on immediate lung expansion and pleurodesis in patients with recurrent malignant pleural effusion.

PubMed

Araujo, Pedro Henrique Xavier Nabuco de; Terra, Ricardo Mingarini; Santos, Thiago da Silva; Chate, Rodrigo Caruso; Paiva, Antonio Fernando Lins de; Pêgo-Fernandes, Paulo Manuel

2017-01-01

To evaluate the role of intrapleural positioning of a pleural catheter in early lung expansion and pleurodesis success in patients with recurrent malignant pleural effusion (RMPE). This was a retrospective study nested into a larger prospective cohort study including patients with RMPE recruited from a tertiary university teaching hospital between June of 2009 and September of 2014. The patients underwent pleural catheter insertion followed by bedside pleurodesis. Chest CT scans were performed twice: immediately before pleurodesis (iCT) and 30 days after pleurodesis (CT30). Catheter positioning was categorized based on iCT scans as posterolateral, anterior, fissural, and subpulmonary. We used the pleural volume on iCT scans to estimate early lung expansion and the difference between the pleural volumes on CT30 and iCT scans to evaluate radiological success of pleurodesis. Clinical pleurodesis success was defined as no need for any other pleural procedure. Of the 131 eligible patients from the original study, 85 were included in this nested study (64 women; mean age: 60.74 years). Catheter tip positioning was subpulmonary in 35 patients (41%), anterior in 23 (27%), posterolateral in 17 (20%), and fissural in 10 (12%). No significant differences were found among the groups regarding early lung expansion (median residual pleural cavity = 377 mL; interquartile range: 171-722 mL; p = 0.645), radiological success of pleurodesis (median volume = 33 mL; interquartile range: -225 to 257 mL; p = 0.923), and clinical success of pleurodesis (85.8%; p = 0.676). Our results suggest that the position of the tip of the pleural catheter influences neither early lung expansion nor bedside pleurodesis success in patients with RMPE. Avaliar o papel do posicionamento intrapleural do cateter pleural na expansão pulmonar precoce e no sucesso da pleurodese em pacientes com derrame pleural maligno recorrente (DPMR). Trata-se de um estudo retrospectivo aninhado em um estudo prospectivo de coorte maior com pacientes com DPMR recrutados em um hospital-escola universitário terciário entre junho de 2009 e setembro de 2014. Os pacientes foram submetidos a inserção de cateter pleural e, em seguida, pleurodese à beira do leito. A TC de tórax foi realizada duas vezes: imediatamente antes da pleurodese (TCi) e 30 dias após a pleurodese (TC30). Com base na TCi, a posição do cateter foi classificada em posterolateral, anterior, fissural e subpulmonar. Usamos o volume pleural na TCi para estimar a expansão pulmonar precoce e a diferença entre os volumes pleurais na TC30 e na TCi a fim de avaliar o sucesso radiológico da pleurodese. Considerou-se que a pleurodese teve êxito clínico quando não foi necessário realizar nenhum outro procedimento pleural. Dos 131 pacientes elegíveis do estudo original, 85 foram incluídos neste estudo aninhado (64 mulheres; média de idade: 60,74 anos). A posição da ponta do cateter foi subpulmonar em 35 pacientes (41%), anterior em 23 (27%), posterolateral em 17 (20%) e fissural em 10 (12%). Não houve diferenças significativas entre os grupos quanto à expansão pulmonar precoce (mediana da cavidade pleural residual = 377 ml; intervalo interquartil: 171-722 ml; p = 0,645), sucesso radiológico da pleurodese (mediana do volume = 33 ml; intervalo interquartil: -225 a 257 ml; p = 0,923) e sucesso clínico da pleurodese (85,8%; p = 0,676). Nossos resultados sugerem que a posição da ponta do cateter pleural não influencia nem a expansão pulmonar precoce nem o sucesso da pleurodese à beira do leito em pacientes com DPMR.

Opinions of South African optometry students about working in rural areas after graduation

PubMed Central

Oduntan, Olalekan A.; Hansraj, Rekha

2015-01-01

Background Eye and vision problems have been reported to be more prevalent in rural than urban areas; and a large proportion of South Africans live in the rural areas. Aim To investigate the opinions of South African optometry students about working in rural areas after completion of their training and to identify factors that may influence their decisions. Method This was a cross-sectional quantitative study using a survey instrument containing both closed and open-ended, semi-structured questions. Results Four hundred and thirty-eight students responded to the questionnaire (85.4% response rate). Overall, many of the respondents did not want to open their first (66%) or second practices (64.6%) in the rural areas. However, most respondents from rural backgrounds reported that they would open their first (77.2%) or second (79.4%) practice in the rural areas. The main reasons cited by the respondents for their unwillingness to work in the rural areas were financial concerns (81.2%), personal safety (80.1%) and poor living conditions (75.3%), with a significantly higher number (p < 0.05) being from urban respondents for the latter two issues only. Conclusion Many students were not in favour of opening practices in rural areas, but were willing to work for the government or a non-governmental organisation after graduation. Efforts should be made to address financial incentives, safety and living conditions in the rural areas. The results of this study have implications for the future of availability and accessibility of eye care services to those living in the rural and remote areas of the country. Opinions des étudiants sud-africains en optométrie sur la possibilité de travailler dans les zones rurales après l’obtention de leur diplôme. Contexte Les problèmes des yeux et de vision sont plus courants dans les zones rurales qu’en ville; et une forte proportion de Sud-africains vit dans les zones rurales. Objectif Examiner les opinions des étudiants sud-africains en optométrie sur la possibilité de travailler dans les zones rurales après avoir terminé leur formation et identifier les facteurs pouvant influencer leur décision. Méthode C’est une étude quantitative transversale utilisant un instrument de sondage contenant des questions semi-structurées fermée et ouvertes. Résultats Quatre cent trente-huit étudiants ont répondu au questionnaire (un taux de réponse de 85.4%). En général, un grand nombre de répondants ne voulaient pas ouvrir leur premier (66%) ou deuxième cabinet (64.6%) dans les zones rurales. Cependant, la plupart des répondants originaires de la campagne ont répondu qu’ils ouvriraient leur premier cabinet (77.2%) ou leur second (79.4%) dans les zones rurales. Les raisons principales citées par les répondants pour ne pas vouloir travailler dans les zones rurales étaient des préoccupations financières (81.2%), la sécurité personnelle (80.1%) et les mauvaises conditions de vie (75.3%), avec un plus grand nombre (p < 0.05) de la part des répondants urbains pour les deux derniers problèmes. Conclusion Beaucoup d’étudiants ne voulaient pas ouvrir de cabinet dans les zones rurales, mais étaient prêts à travailler pour le gouvernement ou une organisation non-gouvernementale après l’obtention de leur diplôme. Il faudra s’occuper des incitations financières, de la sécurité et des conditions de vie dans les zones rurales. Les résultats de cette étude ont des implications pour le futur de la disponibilité et de l’accessibilité des services de soins oculaires pour ceux qui vivent dans les zones rurales et les régions reculées du pays. PMID:26245620

Prevalence, correlates, and impact of coronary calcification on adverse events following PCI with newer-generation DES: Findings from a large multiethnic registry.

PubMed

Copeland-Halperin, Robert S; Baber, Usman; Aquino, Melissa; Rajamanickam, Anitha; Roy, Swathi; Hasan, Choudhury; Barman, Nitin; Kovacic, Jason C; Moreno, Pedro; Krishnan, Prakash; Sweeny, Joseph M; Mehran, Roxana; Dangas, George; Kini, Annapoorna S; Sharma, Samin K

2018-04-01

We sought to determine the prevalence, predictors, and clinical impact of target lesion calcification in patients undergoing percutaneous coronary intervention (PCI) with newer generation drug-eluting stents (DES) and devices. Coronary calcification is independently associated with adverse outcomes following PCI. While newer DES and contemporary devices are considered safer and more efficacious, their influence on outcomes following PCI of heavily calcified lesions is unknown. We performed a retrospective analysis of a large, multiethnic cohort of patients undergoing PCI with new generation DES at an academic center between 2009 and 2013. Coronary calcification was qualitatively assessed as none/mild, moderate, or severe. Independent demographic, clinical, and anatomic predictors of moderate/severe calcification were identified using logistic regression. Associations between coronary calcification and 1-year MACE (death, myocardial infarction, or target vessel revascularization) were examined using Cox modeling. Compared to patients with none/mild (n = 10,180; 82.0%), those with moderate (n = 1,271; 10.0%) or severe (n = 994; 8.0%) calcification were older, more often Caucasian, had more complex target lesions, and worse renal function. The strongest demographic, clinical, and anatomic correlates of moderate/severe calcification were age, Caucasian race, renal dysfunction, lesion length, and left main location. Unadjusted MACE rates among those with none/mild, moderate, and severe calcification were 8.3, 14.6, and 17.8%, respectively (P < 0.001). After multivariable adjustment, the hazard ratio (95% CI) for MACE associated with moderate or severe coronary calcification was 1.63. Target lesion calcification remains independently associated with adverse outcomes in patients treated with newer generation DES and modern devices. © 2017 Wiley Periodicals, Inc.

Détermination de la vitesse de coupe en usinage à l'aide des réseaux de neurones

NASA Astrophysics Data System (ADS)

Amor, Noureddine; Noureddine, Ali; Kherfane, Riad Lakhdar

2018-02-01

En usinage par enlèvement de copeaux, il est nécessaire de connaître des éléments tels que la géométrie à obtenir, la matière à usiner, le type d'opération, la machine-outil, l'outil de coupe, la profondeur de passe, l'avance, la vitesse de coupe. Ces trois derniers éléments quantifiables sont déterminés à l'aide de tables, abaques, logiciel informatique dédié, ou système CFAO, offrant une large gamme de choix mais manquant de transparence et de flexibilité. La contribution de cet article est d'appliquer les techniques d'intelligence artificielle basées sur les réseaux de neurones artificiels (RNA) au développement d'un système de décision pour le choix des paramètres de coupe. Pour modéliser la vitesse de coupe, nous utilisons un RNA avec un algorithme de rétro-propagation. Des valeurs expérimentales provenant d'un abaque source serviront à construire et établir le RNA pour estimer la valeur de la vitesse de coupe, utilisant comme données un certain nombre de paramètres d'influence. La validité des résultats obtenus montre que cette méthode peut être appliquée avec succès et que son utilisation dans le domaine de l'usinage peut contribuer à optimiser les conditions de coupe par un choix plus précis et plus rapide de la vitesse de coupe.

Exploring the Solid State Properties of Enzymatic Poly(amine-co-ester) Terpolymers to Expand their Applications in Gene Transfection.

PubMed

Voevodina, Irina; Scandola, Mariastella; Zhang, Junwei; Jiang, Zhaozhong

2014-01-01

Polymers bearing amino functional groups are an important class of materials capable of serving as non-viral carriers for DNA delivery to living cells. In this work biodegradable poly(amine- co -ester) terpolymers were synthesized via ring-opening and polycondensation copolymerization of lactone (ε-caprolactone (CL), ω-dodecalactone, ω-pentadecalactone (PDL), and ω-hexadecalactone) with diethyl sebacate (DES) and N-methyldiethanolamine (MDEA) in diphenyl ether, catalyzed by Candida antarctica lipase B (CALB). All lactone-DES-MDEA terpolymers had random distributions of lactone, sebacate, MDEA repeat units in the polymer chains. PDL-DES-MDEA terpolymers were studied in the composition range from 21 mol% to 90 mol% PDL whereas the terpolymers with other lactones were investigated at a single composition (80 mol% lactone). DSC and WAXS analyses showed that all investigated terpolymers crystallize in their respective homopolylactone crystal lattice. Terpolymers with large lactones and a high lactone content melt well above room temperature and are hard solids, whereas terpolymers with small lactones (e.g. CL) or with a low lactone content melt below/around ambient temperature and are waxy/gluey materials. Given the importance of hydrophobicity in influencing gene delivery, water contact angle measurements were carried out on lactone-DES-MDEA terpolymers showing that it is possible to tune the hydrophilic-to-hydrophobic balance by varying polymer composition and size of lactone units. To demonstrate the feasibility of using solid terpolymers as nanocarriers for DNA delivery, PDL-DES-MDEA copolymers with 65-90% PDL were successfully transformed into free-standing nanoparticles with average particle size ranging from 163 to 175 nm. Our preliminary results showed that LucDNA-loaded nanoparticles of the terpolymer with 65% PDL were effective for luciferase gene transfection of HEK293 cells.

Exploring the Solid State Properties of Enzymatic Poly(amine-co-ester) Terpolymers to Expand their Applications in Gene Transfection

PubMed Central

Voevodina, Irina; Scandola, Mariastella; Zhang, Junwei; Jiang, Zhaozhong

2014-01-01

Polymers bearing amino functional groups are an important class of materials capable of serving as non-viral carriers for DNA delivery to living cells. In this work biodegradable poly(amine-co-ester) terpolymers were synthesized via ring-opening and polycondensation copolymerization of lactone (ε-caprolactone (CL), ω-dodecalactone, ω-pentadecalactone (PDL), and ω-hexadecalactone) with diethyl sebacate (DES) and N-methyldiethanolamine (MDEA) in diphenyl ether, catalyzed by Candida antarctica lipase B (CALB). All lactone-DES-MDEA terpolymers had random distributions of lactone, sebacate, MDEA repeat units in the polymer chains. PDL-DES-MDEA terpolymers were studied in the composition range from 21 mol% to 90 mol% PDL whereas the terpolymers with other lactones were investigated at a single composition (80 mol% lactone). DSC and WAXS analyses showed that all investigated terpolymers crystallize in their respective homopolylactone crystal lattice. Terpolymers with large lactones and a high lactone content melt well above room temperature and are hard solids, whereas terpolymers with small lactones (e.g. CL) or with a low lactone content melt below/around ambient temperature and are waxy/gluey materials. Given the importance of hydrophobicity in influencing gene delivery, water contact angle measurements were carried out on lactone-DES-MDEA terpolymers showing that it is possible to tune the hydrophilic-to-hydrophobic balance by varying polymer composition and size of lactone units. To demonstrate the feasibility of using solid terpolymers as nanocarriers for DNA delivery, PDL-DES-MDEA copolymers with 65–90% PDL were successfully transformed into free-standing nanoparticles with average particle size ranging from 163 to 175 nm. Our preliminary results showed that LucDNA-loaded nanoparticles of the terpolymer with 65% PDL were effective for luciferase gene transfection of HEK293 cells. PMID:24683469

[Surgical treatment for cicatrix strictures of anal canal].

PubMed

Pomazkin, V I; Mansurov, Iu V

2011-01-01

Classification of anal canal strictures with gradation of intensity, extent and localization is proposed. In 12 patients with compensated strictures combination of stenosis and anal fissure served as an indication for operation. These patients underwent fissure excision with dosed sphincterotomy. Anoplasty with displacement of island skin flaps to anal canal defects was carried out to 29 patients with sub-or decompensated strictures after dissection of scarry stricture. Good direct results were achieved in 38 patients. Compensated re-stenosis treated conservatively was observed in 3 patients after anoplasty. It is drawn a conclusion about necessity of differential approach to choice of treatment mode for anal scarry strictures. Anoplasty according to proposed method is considered to be optimal for marked strictures.

Diffusion of knowledge in dentistry. The pit and fissure sealant conferences.

PubMed

Chapko, M K

1988-01-01

This paper presents data on the diffusion to dentists of information from the May 1981 American Dental Association conference and December 1983 National Institutes of Health (NIH) conference on pit and fissure sealants. A mail survey was sent to 521 (72.2% returned) randomly selected dentists in general practice and all 47 (76.6% returned) pedodontists in the State of Washington. Approximately 70% of the dentists were aware that the conferences had taken place and a little over 50% were aware of the conference recommendations. Awareness was related to: being a pedodontist, number of continuing education hours taken, number of referred journals read, and being an officer in a dental organization.

A geochemical evaluation of the Ash Sha'ib mineral prospect, Asir quadrangle, Kingdom of Saudi Arabia

USGS Publications Warehouse

Allcott, Glenn H.

1970-01-01

The mineralized zone at the remotely located Ash Sha'ib ancient mine contains only a small tonnage of moderately low grade sulfide- bearing rock. Based on present data the gross value of the deposit, with a value of $25.00 or more per ton, is $20,000,000. A belt of metasedimentary rocks, intruded by gabbro to the south and granite to the north, was the host for fissure vein-replacement type mineralization. Most of the mineralization is in a siliceous dolomite transected by fissures. The main sulfide mineral is sphalerite, but minor amounts of chalcopyrlte and argentlferous galena contribute to the value of the mineralized sections.

Interaction of Desulfovibrio desulfuricans biofilms with stainless steel surface and its impact on bacterial metabolism.

PubMed

Lopes, F A; Morin, P; Oliveira, R; Melo, L F

2006-11-01

To study the influence of some metallic elements of stainless steel 304 (SS 304) on the development and activity of a sulfate-reducing bacterial biofilm, using as comparison a reference nonmetallic material polymethylmethacrylate (PMMA). Desulfovibrio desulfuricans biofilms were developed on SS 304 and on a reference nonmetallic material, PMMA, in a flow cell system. Steady-state biofilms were metabolically more active on SS 304 than on PMMA. Activity tests with bacteria from both biofilms at steady state also showed that the doubling time was lower for bacteria from SS 304 biofilms. The influence of chromium and nickel, elements of SS 304 composition, was also tested on a cellular suspension of Des. desulfuricans. Nickel decreased the bacterial doubling time, while chromium had no significant effect. The following mechanism is hypothesized: a Des. desulfuricans biofilm grown on a SS 304 surface in anaerobic conditions leads to the weakening of the metal passive layer and to the dissolution in the bulk phase of nickel ions that have a positive influence on the sulfate-reducing bacteria metabolism. This phenomenon may enhance the biocorrosion process. A better understanding of the interactions between metallic surfaces such as stainless steel and bacteria commonly implied in the corrosion phenomena which is primordial to fight biocorrosion.

Zur Biologie des Planktons des Königshafens (Nordsylter Wattenmeer)

NASA Astrophysics Data System (ADS)

Martens, P.

1982-06-01

From May 1979 on, the following parameters were measured at a station in the inlet of Königshafen near List (Island of Sylt): temperature, salinity, mesozooplankton (>76 µm), chlorophyll-a, seston dry weight, oxygen and phytoplankton-nutrients (NH4-N, NO2-N, NO3-N, PO4-P, SiO3-Si). A multiple regression analysis showed the interrelationships between the parameters measured. Tidal influences on zooplankton and seston dry weight could be observed. At low tide, the amount of zooplankton (not counting the harpacticoid copepods) declines and the number of harpacticoid copepods rises as does the seston dry weight too. The chlorophyll-a content is a function of the phytoplankton-nutrients. An increase in chlorophyll-a leads to a decrease in nitrogen and silicate concentrations. Phosphate, due possibly to a sewage inlet into the Königshafen, is not a limiting factor. The availability of nutrients is influenced by temperature, salinity and the tidal cycle. The amount of oxygen is dependent on water temperature and seston dry weight. High water temperatures and a high seston content lead to a decrease in oxygen concentrations.

Evidence for triple-junction rifting focussed on local magmatic centres along Parga Chasma, Venus

NASA Astrophysics Data System (ADS)

Graff, J. R.; Ernst, R. E.; Samson, C.

2018-05-01

Parga Chasma is a discontinuous rift system marking the southern boundary of the Beta-Atla-Themis (BAT) region on Venus. Along a 1500 km section of Parga Chasma, detailed mapping of Magellan Synthetic Aperture Radar images has revealed 5 coronae, 11 local rift zones distinct from a regional extension pattern, and 47 graben-fissure systems with radiating (28), linear (12) and circumferential (7) geometries. The magmatic centres of these graben-fissure systems typically coincide with coronae or large volcanoes, although a few lack any central magmatic or tectonic feature (i.e. are cryptic). Some of the magmatic centres are interpreted as the foci of triple-junction rifting that form the 11 local rift zones. Cross-cutting relationships between graben-fissure systems and local rift faults reveal synchronous formation, implying a genetic association. Additionally, cross-cutting relationships show that local rifting events postdate the regional extension along Parga Chasma, further indicating multiple stages of rifting. Evidence for multiple centres of younger magmatism and local rifting against a background of regional extension provides an explanation for the discontinuous morphology of Parga Chasma. Examination of the Atlantic Rift System (prior to ocean opening) on Earth provides an analogue to the rift morphologies observed on Venus.

Clinical and imaging features in lung torsion and description of a novel imaging sign.

PubMed

Hammer, Mark M; Madan, Rachna

2018-04-01

We set out to identify the clinical and imaging features seen in lung torsion, a rare but emergent diagnosis leading to vascular compromise of a lobe or entire lung. We retrospectively identified 10 patients with torsion who underwent chest CT. We evaluated each case for the presence of bronchial obstruction and abnormal fissure orientation. In seven patients who underwent contrast-enhanced CTs, we assessed for the presence of the antler sign, a novel sign seen on axial images demonstrating abnormal curvature of the artery and branches originating on one side. Five patients had right middle lobe (RML) torsion after right upper lobectomy, and the remaining occurred following thoracentesis, aortic surgery, or spontaneously. Chest CTs demonstrated bronchial obstruction in eight cases and presence of abnormal fissure orientation in four patients. The antler sign was present in three patients with whole-lung torsion and one patient with lobar torsion; vascular swirling was seen on 3-D images in all seven patients with contrast-enhanced CTs. Lung parenchymal imaging findings in lung torsion may be non-specific. Identification of the antler sign on contrast-enhanced chest CT, in combination with other signs such as bronchial obstruction and abnormal fissure orientation, indicates rotation of the bronchovascular pedicle. The presence of this sign should prompt further evaluation with 3-dimensional reconstructions.

Effect of occlusal calculus utilized as a potential "biological sealant" in special needs patients with gastric feeding tubes: a qualitative in vitro contrast to pit and fissure sealant restorations.

PubMed

Owens, Barry M; Sharp, Harry K; Fourmy, Emily E; Phebus, Jeffrey G

2016-01-01

The aim of this case report and in vitro investigation was to evaluate the marginal microleakage of intact occlusal calculus of primary molars extracted from a special needs patient who received nutrition via a gastric feeding tube. An adolescent with a history of developmental disturbance presented for routine dental care in a hospital facility. Prophylaxis was performed, and 2 mandibular permanent molars were restored. Five primary molars were extracted due to mobility and delayed retention. Heavy deposits of intact calculus were present on the occlusal surfaces of the primary teeth. The extracted teeth were immersed in methylene blue dye solution, invested in acrylic resin, sectioned into blocks, and photographed at 20× and 40× magnification. Previously photographed calculus-free molars with pit and fissure sealants were reviewed and served as contrasting "restorations." The occlusal calculus on the primary teeth extracted from the patient absorbed the dye, while the comparison teeth containing pit and fissure sealants exhibited varying degrees of marginal dye penetration (microleakage). No marginal microleakage was noted in the calculus specimens, indicating that this substrate may serve as a "natural" occlusal surface sealant and that its removal from occlusal surfaces during routine oral prophylaxis may be unnecessary.

Anal lesions presenting in a cohort of child gastroenterological examinations. Implications for sexual traumatic injuries.

PubMed

Rougé-Maillart, Clotilde; Houdu, Sora; Darviot, Estelle; Buchaillet, Céline; Baron, Céline

2015-05-01

The purpose of this study was to describe the anal lesions found in children during a pediatric gastroenterology consultation when the reason for the complaint was related to a digestive disease. This prospective descriptive study included 100 children under 15 years of age over a 13-month period, consulting due to digestive symptoms. The children were under 8 years old (90%) and 25% were under 3.1 years old. Constipation was the most frequent reason for consultation (69%). Fifty-one anal lesions were observed, of which 58.8% were anal fissures, 15.7% were skin tags and 5.8% were venous congestions related to straining. Anal fissures and skin tags were located at the median line, according to the clock-face method in supine position. No child had more than two anal lesions. No anal dilatation, sphincter hypotonia, anal scars, anal lacerations or bruises were found. The two most common anal lesions were anal fissures and skin tags. These anal lesions were mainly observed at the median line and were due to constipation. No cases of multiple anal lesions were found in terms of common digestive diseases. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Quantitative volcanic susceptibility analysis of Lanzarote and Chinijo Islands based on kernel density estimation via a linear diffusion process

PubMed Central

Galindo, I.; Romero, M. C.; Sánchez, N.; Morales, J. M.

2016-01-01

Risk management stakeholders in high-populated volcanic islands should be provided with the latest high-quality volcanic information. We present here the first volcanic susceptibility map of Lanzarote and Chinijo Islands and their submarine flanks based on updated chronostratigraphical and volcano structural data, as well as on the geomorphological analysis of the bathymetric data of the submarine flanks. The role of the structural elements in the volcanic susceptibility analysis has been reviewed: vents have been considered since they indicate where previous eruptions took place; eruptive fissures provide information about the stress field as they are the superficial expression of the dyke conduit; eroded dykes have been discarded since they are single non-feeder dykes intruded in deep parts of Miocene-Pliocene volcanic edifices; main faults have been taken into account only in those cases where they could modified the superficial movement of magma. The application of kernel density estimation via a linear diffusion process for the volcanic susceptibility assessment has been applied successfully to Lanzarote and could be applied to other fissure volcanic fields worldwide since the results provide information about the probable area where an eruption could take place but also about the main direction of the probable volcanic fissures. PMID:27265878

Quantitative volcanic susceptibility analysis of Lanzarote and Chinijo Islands based on kernel density estimation via a linear diffusion process.

PubMed

Galindo, I; Romero, M C; Sánchez, N; Morales, J M

2016-06-06

Risk management stakeholders in high-populated volcanic islands should be provided with the latest high-quality volcanic information. We present here the first volcanic susceptibility map of Lanzarote and Chinijo Islands and their submarine flanks based on updated chronostratigraphical and volcano structural data, as well as on the geomorphological analysis of the bathymetric data of the submarine flanks. The role of the structural elements in the volcanic susceptibility analysis has been reviewed: vents have been considered since they indicate where previous eruptions took place; eruptive fissures provide information about the stress field as they are the superficial expression of the dyke conduit; eroded dykes have been discarded since they are single non-feeder dykes intruded in deep parts of Miocene-Pliocene volcanic edifices; main faults have been taken into account only in those cases where they could modified the superficial movement of magma. The application of kernel density estimation via a linear diffusion process for the volcanic susceptibility assessment has been applied successfully to Lanzarote and could be applied to other fissure volcanic fields worldwide since the results provide information about the probable area where an eruption could take place but also about the main direction of the probable volcanic fissures.

Quantitative volcanic susceptibility analysis of Lanzarote and Chinijo Islands based on kernel density estimation via a linear diffusion process

NASA Astrophysics Data System (ADS)

Galindo, I.; Romero, M. C.; Sánchez, N.; Morales, J. M.

2016-06-01

Risk management stakeholders in high-populated volcanic islands should be provided with the latest high-quality volcanic information. We present here the first volcanic susceptibility map of Lanzarote and Chinijo Islands and their submarine flanks based on updated chronostratigraphical and volcano structural data, as well as on the geomorphological analysis of the bathymetric data of the submarine flanks. The role of the structural elements in the volcanic susceptibility analysis has been reviewed: vents have been considered since they indicate where previous eruptions took place; eruptive fissures provide information about the stress field as they are the superficial expression of the dyke conduit; eroded dykes have been discarded since they are single non-feeder dykes intruded in deep parts of Miocene-Pliocene volcanic edifices; main faults have been taken into account only in those cases where they could modified the superficial movement of magma. The application of kernel density estimation via a linear diffusion process for the volcanic susceptibility assessment has been applied successfully to Lanzarote and could be applied to other fissure volcanic fields worldwide since the results provide information about the probable area where an eruption could take place but also about the main direction of the probable volcanic fissures.

Evaluation of microtensile bond strength of different fissure sealants to bovine enamel.

PubMed

Sen Tunc, E; Bayrak, S; Tuloglu, N; Ertas, E

2012-03-01

The aim of this study was to evaluate the microtensile bond strength (μTBS) of a new fissure sealant and compare it with conventional sealants which are applied to enamel alone, and also with self-etch and etch-and-rinse adhesives. Enamel specimens were prepared and randomly distributed into three groups according to fissure sealant (Aegis, Helioseal F, Helioseal Clear). Each group was then subdivided according to adhesive system (Clearfil S3, Single Bond, no adhesive). A universal testing machine was used to measure μTBS, and data were analysed using one-way ANOVA and Tukey's tests. μTBS values for all Aegis subgroups were significantly lower than for comparable Helioseal F and Helioseal Clear subgroups (p < 0.05). No differences were observed in μTBS of Helioseal F and Helioseal Clear (p > 0.05). In the Helioseal Clear group, μTBS values for Single Bond were significantly higher than for Clearfil S3 (p < 0.05). However, no significant differences were found between the μTBS values of the adhesive subgroups in the Aegis or Helioseal F groups (p > 0.05). Sealant μTBS values may be affected by material content. The addition of an adhesive may improve μTBS values of sealant to enamel. © 2012 Australian Dental Association.

Remote sensing and petrological observations on the 2012-2013 fissure eruption at Tolbachik volcano, Kamchatka: Implications for reconstruction of the eruption chronology

NASA Astrophysics Data System (ADS)

Melnikov, Dmitry; Volynets, Anna O.

2015-12-01

We present a reconstruction of the chronological sequence of events that took place during the first days of the 2012-2013 Tolbachik fissure eruption using petrological data and remote sensing methods. We were forced to use this approach because bad weather conditions did not allow direct observations during the first two days of the eruption. We interpreted infrared images from the scanning radiometer VIIRS Suomi NPP and correlated the output with the results of the geochemical study, including comparison of the ash, deposited at the period from 27 to 29 November, with the samples of lava and bombs erupted from the Menyailov and Naboko vents. We argue that the compositional change observed in the eruption products (the decrease of SiO2 concentration and K2O/MgO ratio, increase of MgO concentration and Mg#) started approximately 24 h after the eruption began. At this time the center of activity moved to the southern part of the fissure, where the Naboko group of vents was formed; therefore, this timeframe also characterizes the timing of the Naboko vent opening. The Naboko group of vents remained active until the end of eruption in September 2013.

Effects of subpressure on the sealing ability of dental sealant in vitro.

PubMed

Tian, Y M; Zhuge, R S; Zhang, Z T; Zheng, D X; Ding, N; Li, Y M

2018-06-06

Pits and fissures sealing with flowable materials is a popular method for preventing caries in preventive dentistry while there is still microleakage existed. This in vitro study aimed to explore the effects of subpressure technique on the sealing ability of pit and fissure sealant. One hundred and forty-one extracted human premolars were collected in this study and treated with different pressure (atmosphere pressure as group C, -0.04 MPa as group S 4 and -0.08 MPa as group S 8 ). Thermocycling (×5000) was also performed. Penetration percentage, microleakage, cross-sectional microhardness (Knoop, KMH) and mineral loss were evaluated. Kappa tests, Friedman nonparametric and two-way ANOVA were used for data analysis. Penetration percentages of group S 4 and S 8 were significant higher compared to that of group C. Microleakage of groups was similar before thermocycling, while subpressure groups showed lower scale of microleakage after thermocycling. Data of KMH and mineral loss showed significant differences between subpressure and thermocycling groups. Subpressure technique could increase the penetration of pit and fissure sealant, decrease microleakage and increase resistance of demineralization after thermocycling. This novel technique may have great potential for preventing from secondary caries. Copyright © 2018 Elsevier Ltd. All rights reserved.

Safety and efficacy of new glyceryl trinitrate suppository formula: first double blind placebo-controlled clinical trial.

PubMed

Emami, M H; Sayedyahossein, S; Aslani, A

2008-07-01

This study was designed to assess the safety and efficacy of 0.2 percent glyceryl trinitrate suppository form in the healing of chronic anal fissure. Thirty-four patients with symptomatic chronic anal fissures were assigned to 0.2 percent glyceryl trinitrate suppository (n = 21) or placebo (n = 13) in a double blind design. Patient's symptom scores were registered at first visit. A validated daily chart was given to assess their symptoms on a daily basis. Both groups received psyllium from the beginning of the study. They were assessed at two-week intervals for six weeks. Then, they started a washout period of one month and after that were crossed over for another six weeks. Chi-squared, t-tests, and analysis of variance were used for statistical analysis. Complete healing at six weeks was achieved in 12 of 21 patients (57 percent) in the glyceryl trinitrate group and 5 of 13 patients (38 percent) in the placebo (P < 0.05). The overall healing rates at the end of study were 15 of 21 (71 percent) vs. 11 of 13 (84 percent) in the glyceryl trinitrate and placebo groups, respectively (P > 0.05). Application of 0.2 percent glyceryl trinitrate suppository form represents a new, promising, and effective treatment for chronic anal fissure.

Cascaded image analysis for dynamic crack detection in material testing

NASA Astrophysics Data System (ADS)

Hampel, U.; Maas, H.-G.

Concrete probes in civil engineering material testing often show fissures or hairline-cracks. These cracks develop dynamically. Starting at a width of a few microns, they usually cannot be detected visually or in an image of a camera imaging the whole probe. Conventional image analysis techniques will detect fissures only if they show a width in the order of one pixel. To be able to detect and measure fissures with a width of a fraction of a pixel at an early stage of their development, a cascaded image analysis approach has been developed, implemented and tested. The basic idea of the approach is to detect discontinuities in dense surface deformation vector fields. These deformation vector fields between consecutive stereo image pairs, which are generated by cross correlation or least squares matching, show a precision in the order of 1/50 pixel. Hairline-cracks can be detected and measured by applying edge detection techniques such as a Sobel operator to the results of the image matching process. Cracks will show up as linear discontinuities in the deformation vector field and can be vectorized by edge chaining. In practical tests of the method, cracks with a width of 1/20 pixel could be detected, and their width could be determined at a precision of 1/50 pixel.

[Evaluation of the effect of one-step self etching adhesives applied in pit and fissure sealing].

PubMed

Su, Hong-Ru; Xu, Pei-Cheng; Qian, Wen-Hao

2016-06-01

To observe the effect of three one-step self etching adhesive systems used in fit and fissure sealant and explore the feasibility of application in caries prevention in school. Seven hundred and twenty completely erupted mandibular first molars in 360 children aged 7 to 9 years old were chosen. The split-mouth design was used to select one side as the experimental group, divided into A1(Easy One Adper), B1(Adper Easy One), and C1(iBond SE).The contra lateral teeth served as A2,B2 and C2 groups (phosphoric acid). The retention and caries status were regularly reviewed .The clinical effect of the two groups was compared using SPSS19.0 software package for Chi - square test. At 3 and 6 months, pit and fissure sealant retention rate in A1 and A2, B1 and B2,C1 and C2 group had no significant difference. At 12 months, sealant retention in A1 and B1 group was significantly lower than A2 and B2 group (P<0.05). No significant difference was found between C1 and C2 groups (P>0.05). At 24 months, sealant retention rate in A1, B1 and C1 group was significantly lower than A2, B2 and C2 group (P<0.05). The caries rate in A1and A2, B1 and B2, C1 and C2 group had no significant difference during different follow-up time (P>0.05). The clinical anticariogenic effect of three kinds of one-step etching adhesives and phosphoric acid etching sealant was similar .One-step self etching adhesive system was recommended for pit and fissure sealant to improve the students' oral health. The long-term retention rate of one-step self etching adhesive system was lower than the phosphoric acid method to long term observation is needed.

Collateral Ventilation to Congenital Hyperlucent Lung Lesions Assessed on Xenon-Enhanced Dynamic Dual-Energy CT: an Initial Experience

PubMed Central

Yang, Dong Hyun; Kim, Namkug; Park, Seung Il; Kim, Dong Kwan; Kim, Ellen Ai-Rhan

2011-01-01

Objective We wanted to evaluate the resistance to collateral ventilation in congenital hyperlucent lung lesions and to correlate that with the anatomic findings on xenon-enhanced dynamic dual-energy CT. Materials and Methods Xenon-enhanced dynamic dual-energy CT was successfully and safely performed in eight children (median age: 5.5 years, 4 boys and 4 girls) with congenital hyperlucent lung lesions. Functional assessment of the lung lesions on the xenon map was done, including performing a time-xenon value curve analysis and assessing the amplitude of xenon enhancement (A) value, the rate of xenon enhancement (K) value and the time of arrival value. Based on the A value, the lung lesions were categorized into high or low (A value > 10 Hounsfield unit [HU]) resistance to collateral ventilation. In addition, the morphologic CT findings of the lung lesions, including cyst, mucocele and an accessory or incomplete fissure, were assessed on the weighted-average CT images. The xenon-enhanced CT radiation dose was estimated. Results Five of the eight lung lesions were categorized into the high resistance group and three lesions were categorized into the low resistance group. The A and K values in the normal lung were higher than those in the low resistance group. The time of arrival values were delayed in the low resistance group. Cysts were identified in five lesions, mucocele in four, accessory fissure in three and incomplete fissure in two. Either cyst or an accessory fissure was seen in four of the five lesions showing high resistance to collateral ventilation. The xenon-enhanced CT radiation dose was 2.3 ± 0.6 mSv. Conclusion Xenon-enhanced dynamic dual-energy CT can help visualize and quantitate various degrees of collateral ventilation to congenital hyperlucent lung lesions in addition to assessing the anatomic details of the lung. PMID:21228937

Collateral ventilation to congenital hyperlucent lung lesions assessed on xenon-enhanced dynamic dual-energy CT: an initial experience.

PubMed

Goo, Hyun Woo; Yang, Dong Hyun; Kim, Namkug; Park, Seung Il; Kim, Dong Kwan; Kim, Ellen Ai-Rhan

2011-01-01

We wanted to evaluate the resistance to collateral ventilation in congenital hyperlucent lung lesions and to correlate that with the anatomic findings on xenon-enhanced dynamic dual-energy CT. Xenon-enhanced dynamic dual-energy CT was successfully and safely performed in eight children (median age: 5.5 years, 4 boys and 4 girls) with congenital hyperlucent lung lesions. Functional assessment of the lung lesions on the xenon map was done, including performing a time-xenon value curve analysis and assessing the amplitude of xenon enhancement (A) value, the rate of xenon enhancement (K) value and the time of arrival value. Based on the A value, the lung lesions were categorized into high or low (A value > 10 Hounsfield unit [HU]) resistance to collateral ventilation. In addition, the morphologic CT findings of the lung lesions, including cyst, mucocele and an accessory or incomplete fissure, were assessed on the weighted-average CT images. The xenon-enhanced CT radiation dose was estimated. Five of the eight lung lesions were categorized into the high resistance group and three lesions were categorized into the low resistance group. The A and K values in the normal lung were higher than those in the low resistance group. The time of arrival values were delayed in the low resistance group. Cysts were identified in five lesions, mucocele in four, accessory fissure in three and incomplete fissure in two. Either cyst or an accessory fissure was seen in four of the five lesions showing high resistance to collateral ventilation. The xenon-enhanced CT radiation dose was 2.3 ± 0.6 mSv. Xenon-enhanced dynamic dual-energy CT can help visualize and quantitate various degrees of collateral ventilation to congenital hyperlucent lung lesions in addition to assessing the anatomic details of the lung.

Surface Deformation in Quetta Valley, Balochistan, Pakistan

NASA Astrophysics Data System (ADS)

Huang, J.; Shuhab, K.; Wulamu, A.; Crupa, W.; Khan, A. S.; Kakar, D. M.; Kasi, A.

2015-12-01

In February 2011, several ground fissures up to ~1.8 km in length appeared in the Quetta Valley, Balochsitan, Pakistan. It is not clear what caused the sudden occurrence of these fissures. The region is tectonically active and bounded to the west by several regional strike-slip faults including the north-south striking left-lateral Chaman fault system that slips at ~10 mm per year. Several large earthquakes have occurred recently in this area, one fatal 6.4 magnitude (Mw) earthquake occurred on October 28th, 2008. Some parts of Quetta Valley are subsiding; GPS data from two stations in Quetta that span mid-2006 - 2009 recorded subsidence rates of ~10 cm per year. Although subsidence in urban areas is generally attributed to groundwater depletion, it is not clear whether ground fissures are caused by water withdrawal or related to tectonics of the region. This study is designed to quantify and assess the source of surface deformation in Quetta Valley using InSAR, GPS, seismic and earthquake centroid moment tensor data. To detect and map the spatial-temporal features of the processes that led to the surface deformation, we used two time series, i.e., 15 European Remote Sensing (ERS-1/2) satellite images from 1992 - 1999 and 27 ENVISAT images spanning 2003 - 2010. A Differential Interferometric Synthetic Aperture Radar (DInSAR) Small Baseline Subset (SBAS) technique was used to investigate surface deformation. Eleven continuous-GPS stations within the InSAR antenna footprint were compared with the InSAR time series for quality control. Preliminary InSAR results revealed that the areas in and around the fissures are subsiding at 5 cm per year. Five seismic lines totaling ~60 km, acquired in 2003, were used to interpret faults beneath Holocene alluvium in the Quetta Valley. One of the blind faults is a north-south striking thrust fault mapped north into the Takatu range. However, a focal mechanism for the 2008 earthquake in this region indicated northwest-southeast strike-slip fault movement.

Campaign gravity results From kilauea volcano, hawaii, 2009-2011

NASA Astrophysics Data System (ADS)

Wilkinson, S. K.; Poland, M. P.; Battaglia, M.

2011-12-01

The gravity and leveling networks at Kilauea's summit caldera consist of approximately 60 benchmarks that are measured with a gravimeter as well as leveled for elevation data. Gravity data were collected in December 2009, June 2010 and March 2011. Elevation data were collected in 2009 and 2010. For the gravity survey completed in March 2011, we use InSAR and GPS data to assess elevation changes at the time of the gravity survey. During December 2009-March 2011, Kilauea's summit was characterized by minor deflation, following trends established in mid-2007. In mid-2010, however, the summit began to inflate, with a rate that increased significantly in October 2010. This inflation was associated with a decrease in the effusion rate from the volcano's east rift zone eruptive vents, suggesting that Kilauea's magma plumbing system was backing up. On March 5, 2011, a 2-km-long fissure eruption began about 3 km west of Pu`u `O`o, causing rapid summit deflation as magma drained from beneath the summit to feed the new eruptive vents. The fissure eruption ended on March 9, at which time the summit began to reinflate. Preliminary analysis of gravity data collected before and after the fissure eruption indicates a complex pattern of mass flow beneath the summit caldera. Net summit deformation was negligible between December 2009 and June 2010, but there is a residual gravity high centered near Halema'uma'u Crater. For the December 2009 to March 2011 time period, the caldera shows net subsidence. A positive residual gravity anomaly is located southeast of Halema'uma'u Crater while a negative residual gravity anomaly exists north of Halema'uma'u Crater. These patterns are somewhat unexpected, given the sudden draining of magma from beneath the summit during the March 5-9 fissure eruption. We conclude that the campaign gravity data were not collected at the optimal times to "catch" this event. Nevertheless, the data can still be used to assess different aspects of Kilauea's magma system.

Évaluer les risques dans le cas de troubles mentaux indifférenciés

PubMed Central

Silveira, José; Rockman, Patricia; Fulford, Casey; Hunter, Jon

2016-01-01

Résumé Objectif Proposer aux médecins de soins primaires une approche novatrice pour la détermination des risques et la prise de décisions cliniques connexes dans la prise en charge de troubles mentaux indifférenciés. Sources de l’information Nous avons procédé à une recherche documentaire dans PubMed, CINAHL, PsycINFO et Google Scholar à l’aide des expressions de recherche suivantes, en anglais : diagnostic uncertainty, diagnosis, risk identification, risk assessment/methods, risk, risk factors, risk management/methods, cognitive biases and psychiatry, decision making, mental disorders/diagnosis, clinical competence, evidence-based medicine, interviews as topic, psychiatry/education, psychiatry/methods, documentation/methods, forensic psychiatry/education, forensic psychiatry/methods, mental disorders/classification, mental disorders/psychology, violence/prevention and control et violence/psychology. Message principal Les troubles mentaux constituent une grande part de la pratique en soins primaires; ils se présentent souvent de manière indifférenciée et ce, pendant de longues périodes. La difficile quête d’un diagnostic peut détourner l’attention de la détermination des risques, parce que nous présumons souvent qu’il faut un diagnostic avant d’amorcer un traitement. Cette situation peut avoir contribué par inadvertance à des événements indésirables. Il faudrait en priorité se concentrer sur les points saillants relatifs aux risques que présente le patient. Cet article propose une approche novatrice pour organiser les renseignements sur le patient afin d’aider à la détermination des risques et à la prise de décisions relativement à la prise en charge des patients souffrant de troubles mentaux indifférenciés. Conclusion Une approche structurée peut aider les médecins à gérer l’incertitude clinique fréquente dans la détermination des risques chez des patients souffrant de troubles mentaux, et à composer avec l’anxiété et les biais cognitifs courants qui influencent la prise de décisions en matière de risques. En se concentrant sur les risques, les déficiences fonctionnelles et les symptômes connexes à l’aide d’un cadre novateur, les médecins peuvent répondre aux besoins immédiats de leurs patients tout en continuant à rechercher un diagnostic précis et à établir un traitement à long terme. PMID:27965332

Reticulation des fibres lignocellulosiques

NASA Astrophysics Data System (ADS)

Landrevy, Christel

Pour faire face à la crise économique la conception de papier à valeur ajoutée est développée par les industries papetières. Le but de se projet est l'amélioration des techniques actuelles de réticulation des fibres lignocellulosiques de la pâte à papier visant à produire un papier plus résistant. En effet, lors des réactions de réticulation traditionnelles, de nombreuses liaisons intra-fibres se forment ce qui affecte négativement l'amélioration anticipée des propriétés physiques du papier ou du matériau produit. Pour éviter la formation de ces liaisons intra-fibres, un greffage sur les fibres de groupements ne pouvant pas réagir entre eux est nécessaire. La réticulation des fibres par une réaction de « click chemistry » appelée cycloaddition de Huisgen entre un azide et un alcyne vrai, catalysée par du cuivre (CuAAC) a été l'une des solutions trouvée pour remédier à ce problème. De plus, une adaptation de cette réaction en milieux aqueux pourrait favoriser son utilisation en milieu industriel. L'étude que nous désirons entreprendre lors de ce projet vise à optimiser la réaction de CuAAC et les réactions intermédiaires (propargylation, tosylation et azidation) sur la pâte kraft, en milieu aqueux. Pour cela, les réactions ont été adaptées en milieu aqueux sur la cellulose microcristalline afin de vérifier sa faisabilité, puis transférée à la pâte kraft et l'influence de différents paramètres comme le temps de réaction ou la quantité de réactifs utilisée a été étudiée. Dans un second temps, une étude des différentes propriétés conférées au papier par les réactions a été réalisée à partir d'une série de tests papetiers optiques et physiques. Mots Clés Click chemistry, Huisgen, CuAAC, propargylation, tosylation, azidation, cellulose, pâte kraft, milieu aqueux, papier.

Evidence-based clinical practice guideline for the use of pit-and-fissure sealants: A report of the American Dental Association and the American Academy of Pediatric Dentistry.

PubMed

Wright, John T; Crall, James J; Fontana, Margherita; Gillette, E Jane; Nový, Brian B; Dhar, Vineet; Donly, Kevin; Hewlett, Edmond R; Quinonez, Rocio B; Chaffin, Jeffrey; Crespin, Matt; Iafolla, Timothy; Siegal, Mark D; Tampi, Malavika P; Graham, Laurel; Estrich, Cameron; Carrasco-Labra, Alonso

2016-08-01

This article presents evidence-based clinical recommendations for the use of pit-and-fissure sealants on the occlusal surfaces of primary and permanent molars in children and adolescents. A guideline panel convened by the American Dental Association (ADA) Council on Scientific Affairs and the American Academy of Pediatric Dentistry conducted a systematic review and formulated recommendations to address clinical questions in relation to the efficacy, retention, and potential side effects of sealants to prevent dental caries; their efficacy compared with fluoride varnishes; and a head-to-head comparison of the different types of sealant material used to prevent caries on pits and fissures of occlusal surfaces. This is an update of the ADA 2008 recommendations on the use of pit-and-fissure sealants on the occlusal surfaces of primary and permanent molars. The authors conducted a systematic search in MEDLINE, Embase, Cochrane Central Register of Controlled Trials, and other sources to identify randomized controlled trials reporting on the effect of sealants (available on the US market) when applied to the occlusal surfaces of primary and permanent molars. The authors used the Grading of Recommendations Assessment, Development, and Evaluation approach to assess the quality of the evidence and to move from the evidence to the decisions. The guideline panel formulated 3 main recommendations. They concluded that sealants are effective in preventing and arresting pit-and-fissure occlusal carious lesions of primary and permanent molars in children and adolescents compared with the nonuse of sealants or use of fluoride varnishes. They also concluded that sealants could minimize the progression of noncavitated occlusal carious lesions (also referred to as initial lesions) that receive a sealant. Finally, based on the available limited evidence, the panel was unable to provide specific recommendations on the relative merits of 1 type of sealant material over the others. These recommendations are designed to inform practitioners during the clinical decision-making process in relation to the prevention of occlusal carious lesions in children and adolescents. Clinicians are encouraged to discuss the information in this guideline with patients or the parents of patients. The authors recommend that clinicians reorient their efforts toward increasing the use of sealants on the occlusal surfaces of primary and permanent molars in children and adolescents. Copyright © 2016 American Academy of Pediatric Dentistry and American Dental Association. Published by Elsevier Inc. All rights reserved.

Anorectal abscess

MedlinePlus

Anal abscess; Rectal abscess; Perirectal abscess; Perianal abscess; Gland abscess; Abscess - anorectal ... of anorectal abscess include: Blocked glands in the anal area Infection of an anal fissure Sexually transmitted ...

Les inconvénients de perdre du poids

PubMed Central

Bosomworth, N. John

2012-01-01

Résumé Objectif Explorer les raisons pour lesquelles la perte de poids à long terme échoue la plupart du temps et évaluer les conséquences de diverses trajectoires pondérales, y compris la stabilité, la perte et le gain. Source des données Les études qui évaluent les paramètres pondéraux dans la population sont en majorité observationnelles. Des données probantes de niveau I ont été publiées pour évaluer l’influence des interventions relatives au poids sur la mortalité et la qualité de vie. Message principal Seulement un petit pourcentage des personnes qui désirent perdre du poids réussissent à le faire de manière durable. La mortalité est la plus faible chez les personnes se situant dans la catégorie de poids élevé-normal et surpoids. La trajectoire pondérale la plus sécuritaire est la stabilité du poids avec une optimisation de la condition physique et métabolique. Il est démontré que la mortalité est plus faible chez les personnes ayant des comorbidités reliées à l’obésité si elles perdent du poids. Il est aussi établi que la qualité de vie sur le plan de la santé est meilleure chez les personnes obèses qui perdent du poids. Par contre, la perte de poids chez une personne obèse autrement en santé est associée à une mortalité accrue. Conclusion La perte de poids est recommandable seulement chez les personnes qui ont des comorbidités reliées à l’obésité. Les personnes obèses en santé qui veulent perdre du poids devraient être informées qu’il peut y avoir des risques à le faire. Une stratégie qui se traduit par un indice de masse corporelle stable avec une condition physique et métabolique optimisée, peu importe le poids, est l’option d’intervention la plus sécuritaire en ce qui concerne le poids.

Influence of dissimilatory metal reduction on fate of organic and metal contaminants in the subsurface

NASA Astrophysics Data System (ADS)

Lovley, Derek R.; Anderson, Robert T.

Dissimilatory Fe(III)-reducing microorganisms have the ability to destroy organic contaminants under anaerobic conditions by oxidizing them to carbon dioxide. Some Fe(III)-reducing microorganisms can also reductively dechlorinate chlorinated contaminants. Fe(III)-reducing microorganisms can reduce a variety of contaminant metals and convert them from soluble forms to forms that are likely to be immobilized in the subsurface. Studies in petroleum-contaminated aquifers have demonstrated that Fe(III)-reducing microorganisms can be effective agents in removing aromatic hydrocarbons from groundwater under anaerobic conditions. Laboratory studies have demonstrated the potential for Fe(III)-reducing microorganisms to remove uranium from contaminated groundwaters. The activity of Fe(III)-reducing microorganisms can be stimulated in several ways to enhance organic contaminant oxidation and metal reduction. Molecular analyses in both field and laboratory studies have demonstrated that microorganisms of the genus Geobacter become dominant members of the microbial community when Fe(III)-reducing conditions develop as the result of organic contamination, or when Fe(III) reduction is artificially stimulated. These results suggest that further understanding of the ecophysiology of Geobacter species would aid in better prediction of the natural attenuation of organic contaminants under anaerobic conditions and in the design of strategies for the bioremediation of subsurface metal contamination. Des micro-organismes simulant la réduction du fer ont la capacité de détruire des polluants organiques dans des conditions anérobies en les oxydant en dioxyde de carbone. Certains micro-organismes réducteurs de fer peuvent aussi dé-chlorer par réduction des polluants chlorés. Des micro-organismes réducteurs de fer peuvent réduire tout un ensemble de métaux polluants et les faire passer de formes solubles à des formes qui sont susceptibles d'être immobilisées dans le milieu souterrain. Des études d'aquifères pollués par du pétrole ont montré que des micro-organismes réducteurs de fer peuvent être des agents efficaces pour éliminer les hydrocarbures aromatiques des eaux souterraines dans des conditions anérobies. Des études en laboratoire ont montré que des micro-organismes réducteurs de fer avaient la capacité d'éliminer l'uranium d'eaux souterraines polluées. L'activité de micro-organismes réducteurs de fer peut être stimulée de différentes manières pour augmenter l'oxydation de polluants organiques et la réduction de métaux. Des analyses moléculaires concernant des études de terrain et de laboratoire ont montré que des micro-organismes du genre Geobacter deviennent les membres dominants de la communauté microbienne quand les conditions de réduction en Fe(III) sont réalisées à la suite d'une pollution organique, ou lorsque la réduction en Fe(III) est stimulée artificiellement. Ces résultats laissent penser que des connaissances supplémentaires sur l'écophysiologie des espèces Geobacter devraient aider à une meilleure prédiction de la diminution naturelle des teneurs en polluants organiques dans des conditions anérobies, ainsi qu'à la définition de stratégies de dépollution biologique de pollutions souterraines par les métaux. Algunos microorganismos Fe(III)-reductores son capaces de destruir selectivamente determinados contaminantes orgánicos en condiciones anaerobias, oxidándolos a dióxido de carbono. Otros de estos microorganismos Fe(III)-reductores pueden reducir, bien compuestos clorados, bien una gran variedad de metales, que dejan de ser solubles y se inmovilizan en el subsuelo. Estudios realizados en acuéferos contaminados por petróleo muestran que los microorganismos Fe(III)-reductores pueden ser unos agentes muy eficientes para eliminar los hidrocarburos aromáticos de las aguas subterráneas en condiciones anaerobias, mientras que estudios de laboratorio muestran el potencial de estos microorganismos para eliminar uranio. La actividad de los microorganismos Fe(III)-reductores se puede estimular para conseguir una mayor eficiencia en la oxidación de contaminantes orgánicos y en la reducción de metales. Diversos análisis moleculares en estudios de campo y de laboratorio muestran que los microorganismos del género Geobacter se convierten en los miembros dominantes de la comunidad microbiana cuando se desarrollan condiciones Fe(III)-reductoras, bien como resultado de la contaminación orgánica, bien por estimulación artificial. En consecuencia, se hace necesario un mayor entendimiento de la ecofisiologéa de los microorganismos del género Geobacter para mejorar las predicciones sobre atenuación natural de los contaminantes orgánicos bajo condiciones anaerobias y para el diseño de estrategias de biorremediación del subsuelo en los casos de contaminación por metales.

Anthropometric and Anthroposcopic Analysis of Periorbital Features in Malaysian Population: An Inter-racial Study.

PubMed

Packiriswamy, Vasanthakumar; Kumar, Pramod; Bashour, Mounir

2018-05-03

In oculoplastic operations, knowledge of the dimensions of periorbital features based on age, gender, and race is essential for achieving better aesthetic result. This article seeks to determine the racial and gender differences of periorbital features among Malaysian Malay (MM), Malaysian Indian (MI), and Malaysian Chinese (MI) subjects. Evaluation of periorbital features was done on photographs of 200 MM, 200 MI, and 200 MC subjects, aged 18 to 26 years. The measured values were evaluated by an independent t -test. A significant difference was found between MM and MI in all measurements except interbrow distance in males, eyebrow thickness in females, and apex to lateral limbus distance in both sexes. Between MI and MC the difference was insignificant for interbrow distance in male groups, apex to lateral limbus distance in females, and palpebral fissure inclination and eyebrow apex angle in both sexes. Between MM and MC, significant differences were found for eyebrow thickness and medial canthus tilt in female group. Male groups showed significant difference for apex to lateral limbus and lateral canthus distance and eyebrow apex angle. Eyebrow height, palpebral fissure width, and intercanthal distance were significantly different in both sexes. Sexual dimorphism was found for all measurements in MI, but MM and MC showed insignificant difference for eyebrow apex angle. Four types of epicanthus were observed in MM and MC and three types in MI. Eyebrow apex between lateral limbus and lateral canthus was the most common position in all racial groups. Significant racial and gender differences exist for certain periorbital measurements. The knowledge of these differences is expected to influence the surgical outcome. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Isolated nonpulsatile enophthalmos in neurofibromatosis: An uncommon entity

PubMed Central

Singh, Swati; Mulay, Kaustubh; Mittal, Vikas

2017-01-01

Isolated enophthalmos is a rarely observed entity in neurofibromatosis (NF). A 12-year-old male presented with right lower eyelid fat prolapse and enophthalmos for the past 7 years. There was no history of antecedent trauma/surgery. Computed tomography of orbit revealed an ill-defined intraconal hyperdense lesion located between lateral and inferior rectus along with an enlarged inferior orbital fissure (IOF). Superior orbital fissure was minimally widened without prolapse of any intracranial contents. Excision biopsy along with repair of widened IOF was performed through inferior transconjunctival route. Histopathology was suggestive of plexiform neurofibroma with positivity for S-100 and epithelial membrane antigen. No associated cutaneous lesions were present. Nonpulsatile enophthalmos with eyelid fat prolapse can be a presenting sign of NF. PMID:29044092

Isolated nonpulsatile enophthalmos in neurofibromatosis: An uncommon entity.

PubMed

Singh, Swati; Mulay, Kaustubh; Mittal, Vikas

2017-10-01

Isolated enophthalmos is a rarely observed entity in neurofibromatosis (NF). A 12-year-old male presented with right lower eyelid fat prolapse and enophthalmos for the past 7 years. There was no history of antecedent trauma/surgery. Computed tomography of orbit revealed an ill-defined intraconal hyperdense lesion located between lateral and inferior rectus along with an enlarged inferior orbital fissure (IOF). Superior orbital fissure was minimally widened without prolapse of any intracranial contents. Excision biopsy along with repair of widened IOF was performed through inferior transconjunctival route. Histopathology was suggestive of plexiform neurofibroma with positivity for S-100 and epithelial membrane antigen. No associated cutaneous lesions were present. Nonpulsatile enophthalmos with eyelid fat prolapse can be a presenting sign of NF.

[The management of 126 cases of posterior cracked crown of tooth and its effective observation].

PubMed

Chen, L L

2000-06-01

To detect the treatment and effect of posterior cracked tooth. 162 posterior cracked teeth of 158 cases, including enamel fissure and dentin fissure, all there cases undergone the synthetical treatment and follow up in different period, the longest observation period was 2.5 years. The healing and improved rate of 162 cracked teeth 90.74%. Among cases of failure, we have founded 6 cases of acute pulpitis (3.7%), 3 cases of alveodental abscess (1.85%), 2 cases of chronic apical periodontitis (1.24%), 4 cases of tooth fracture (2.4%). Cracked tooth was caused by multiple factors. Early diagnosis, synthetical treatment, and follow up in different period are 3 main factors in treatment.

Method for laser drilling subterranean earth formations

DOEpatents

Shuck, Lowell Z.

1976-08-31

Laser drilling of subterranean earth formations is efficiently accomplished by directing a collimated laser beam into a bore hole in registry with the earth formation and transversely directing the laser beam into the earth formation with a suitable reflector. In accordance with the present invention, the bore hole is highly pressurized with a gas so that as the laser beam penetrates the earth formation the high pressure gas forces the fluids resulting from the drilling operation into fissures and pores surrounding the laser-drilled bore so as to inhibit deleterious occlusion of the laser beam. Also, the laser beam may be dynamically programmed with some time dependent wave form, e.g., pulsed, to thermally shock the earth formation for forming or enlarging fluid-receiving fissures in the bore.

A model of the plumes above basaltic fissure eruptions

NASA Astrophysics Data System (ADS)

Woods, Andrew W.

1993-06-01

A simple model of the ascent of the volatiles above basaltic fissure eruptions shows that atmospheric moisture may play an important role in injecting volatiles high into the atmosphere. As ambient water vapor is entrained and carried upwards by the plume, it decompresses and some condensation may occur. This causes the release of latent heat which heats up the air and thereby increases the buoyancy of the plume enabling it to ascend several kilometers higher than in a dry atmosphere. The height of such plumes also increases with the mass fraction of fine ash in the fountain. Although very simple, the model predictions are in accord with observations of plume heights during historical eruptions including the 1984 eruption of Mauna Loa.

Magma chamber deflation recorded by the Global Positioning System - The Hekla 1991 eruption

NASA Astrophysics Data System (ADS)

Sigmundsson, Freysteinn; Einarsson, Pall; Bilham, Roger

1992-07-01

Between January 17 and March 11, 1991, 0.15 cu km of lava erupted initially from several radial fissures and subsequently from a single fissure on the SE flank of Hekla volcano, Iceland. Hekla is surrounded by an array of control points measured in 1989 using GPS geodesy and re-measured after the eruption. These measurements indicate that the eruption was associated with a surface deflation volume of 0.1 + 0.08 - 0.04 centered on Hekla (63.995 deg N +4 -3 km, 19.69 deg W +1.5 -2 km). The depth to the magma reservoir is 9 +6 -7 km, poorly constrained due to the absence of GPS control points close to the volcano.

Pristine Inner Experience and Descriptive Experience Sampling: Implications for Psychology

PubMed Central

Lapping-Carr, Leiszle R.; Heavey, Christopher L.

2017-01-01

Pristine inner experience is that which is directly present in awareness before it is distorted by attempts at observation or interpretation. Many psychological methods, including most introspective methods, attempt to measure some aspect of pristine inner experience (thoughts, feelings, mental imagery, sensations, etc.). We believe, however, that these methods produce unspecifiable combinations of pristine inner experience, beliefs about the self, beliefs about what inner experience should be like, inaccurate recollections, miscommunications, and other confounding influences. We argue that descriptive experience sampling (DES) can produce high fidelity descriptions of pristine inner experience. These descriptions are used to create idiographic profiles, carefully crafted, in-depth characterizations of the pristine inner experience of individuals. We believe these profiles, because they are built from moments apprehended via a method that confronts the challenges inherent in examining inner experience, are uniquely valuable in advancing the science of inner experience and psychology broadly. For example, DES observations raise important questions about the veracity of results gathered via questionnaires and other introspective methods, like casual introspection. DES findings also provide high fidelity phenomenological data that can be useful for those developing psychological theories, such as theories of emotional processing. Additionally, DES procedures may allow clinicians and clients to practice valuable skills, like bracketing presuppositions and attending to internal experiences. This paper will describe difficulties inherent in the study of pristine inner experience and discuss implications of high fidelity descriptions of pristine inner experience for psychological research, theory development, and clinical practice. PMID:29312047

Fractal atomic surfaces of self-similar quasiperiodic tilings of the plane

NASA Astrophysics Data System (ADS)

Godrèche, C.; Luck, J. M.; Janner, A.; Janssen, T.

1993-09-01

We consider in parallel three self-similar quasiperiodic tilings of the plane with eight-fold symmetry, made of two prototiles, the square and the 45-degree rhomb. They possess the same inflation rules up to a reordering of the tiles. We study the consequences of this reordering on the nature of the atomic surfaces, or acceptance domains, and on the Fourier spectra of the tilings. For two of the tilings the atomic surface has a fractal boundary. For one of them it is not a connected set. We argue that the situation described in this paper is generic. Nous considérons en parallèle trois pavages quasipériodiques auto-similaires du plan, de symétrie de rotation d'ordre huit, et constitués des deux mêmes tuiles : le carré et le losange à 45 degrés. Les trois pavages sont décrits par les mêmes règles d'inflation, à une permutation des tuiles près. Nous étudions l'influence de cette permutation sur les surfaces atomiques, ou domaines d'acceptance, et sur les spectres de Fourier des pavages. Le bord de la surface atomique de deux des pavages est fractal ; pour l'un d'entre eux ce bord n'est pas connexe. Les propriétés décrites sur cette famille d'exemples sont vraisemblablement génériques.

Enhanced and green extraction polyphenols and furanocoumarins from Fig (Ficus carica L.) leaves using deep eutectic solvents.

PubMed

Wang, Tong; Jiao, Jiao; Gai, Qing-Yan; Wang, Peng; Guo, Na; Niu, Li-Li; Fu, Yu-Jie

2017-10-25

Nowadays, green extraction of bioactive compounds from medicinal plants has gained increasing attention. As green solvent, deep eutectic solvent (DES) have been highly rated to replace toxic organic solvents in extraction process. In present study, to simultaneous extraction five main bioactive compounds from fig leaves, DES was tailor-made. The tailor-made DES composed of a 3:3:3 molar ratio of glycerol, xylitol and D-(-)-Fructose showed enhanced extraction yields for five target compounds simultaneously compared with traditional methanol and non-tailor DESs. Then, the tailor-made DES based extraction methods have compared and microwave-assisted extraction was selected and optimized due to its high extraction yields with lower time consumption. The influencing parameters including extraction temperature, liquid-solid ratio, and extraction time were optimized using response surface methodology (RSM). Under optimal conditions the extraction yield of caffeoylmalic acid, psoralic acid-glucoside, rutin, psoralen and bergapten was 6.482mg/g, 16.34mg/g, 5.207mg/g, 15.22mg/g and 2.475mg/g, respectively. Macroporous resin D101 has been used to recovery target compounds with recovery yields of 79.2%, 83.4%, 85.5%, 81.2% and 75.3% for caffeoylmalic acid, psoralic acid-glucoside, rutin, psoralen and bergapten, respectively. The present study suggests that DESs are truly designer and efficient solvents and the method we developed was efficient and sustainable for extraction main compounds from Fig leaves.mg/g. Copyright © 2017 Elsevier B.V. All rights reserved.

Le role du phytoplancton de petite taille (<20 mum) dans les variations des proprietes optiques des eaux du Saint-Laurent

NASA Astrophysics Data System (ADS)

Mas, Sebastien

Les mesures satellitaires de couleur des oceans sont largement determinees par les proprietes optiques inherentes (IOPs) des eaux de surface. D'autre part, le phytoplancton de petite taille (<20 mum) est le plus souvent dominant dans les oceans, et peut donc etre une source importante de variation des IOPs dans les oceans. Dans ce contexte, le but principal de ce doctorat etait de definir l'impact du phytoplancton (<20 mum) sur les variations des proprietes optiques de l'Estuaire et du Golfe du Saint-Laurent (Canada). Afin d'atteindre cet objectif, il etait necessaire de determiner en milieu controle les facteurs de variabilite des proprietes optiques cellulaires et des IOPs du phytoplancton (<20 mum) des eaux du Saint-Laurent, et d'evaluer la contribution du phytoplancton (<20 mum) aux proprietes optiques totales des eaux du Saint-Laurent. Des experiences en laboratoire ont montre que les variations des proprietes optiques des cellules phytoplanctoniques soumises a un cycle jour-nuit, ainsi qu'a des changements concomitants d'intensite lumineuse, peuvent contribuer significativement a la variabilite des proprietes optiques observee en milieu naturel. D'autres experiences ont, quant a elles, mis en evidence que les variations des proprietes optiques des cellules phytoplanctoniques dues aux phases de croissance peuvent alterer les IOPs des oceans, particulierement pendant les periodes de floraison. De plus, la presence de bacteries et de particules detritiques peut egalement affecter la variabilite des IOPs totales, notamment la diffusion. Au printemps, dans l'Estuaire et le Golfe du Saint-Laurent, la contribution du phytoplancton <20 mum aux IOPs presentait des differences regionales evidentes pour les proprietes d'absorption et de diffusion. En plus de la variabilite spatiale, les proprietes optiques cellulaires presentaient des variations journalieres, et ce particulierement pour le picophytoplancton. Enfin, la plupart des differences observees dans les proprietes biooptiques, particulierement l'absorption, etaient attribuables a la contribution du phytoplancton <20 mum. Ceci confirme l'importance de la structure de taille des communautes phytoplanctoniques dans les modeles bio-optiques appliques au Saint-Laurent. L'ensemble des resultats a permis de mettre en evidence l'importance des mecanismes de photoacclimatation et de synchronisation du cycle cellulaire du phytoplancton sur les variations journalieres des IOPs, ainsi que de l'etat physiologique relie au stade de croissance sur les variations temporelles a long terme des IOPs. De plus, le phytoplancton <20 mum contribue de maniere importante aux IOPs et a leur variabilite dans l'Estuaire et le Golfe du St-Laurent, et ce particulierement pour l'absorption. Cette etude de doctorat souligne donc l'importance du phytoplancton <20 mum sur la variabilite des IOPs des oceans.

Apprentissage dans un Environnement Informatique: Possibilite, Nature, Transfert des Acquis (Learning within an Information Environment: Possibilities, Native, and Transfer of Ideas).

ERIC Educational Resources Information Center

Dagher, Antoine

1996-01-01

Examines possibilities for learning offered by a piece of software, Fonctuse, likely to encourage the linking of algebraic and graphical representations of functions. Studied the influence of prior algebraic knowledge on the cognitive processes and constructions of knowledge at play in this environment. (Author/MKR)

Black Psyllium

MedlinePlus

... in the skin around the anus (anal fissures), surgery on the rectum, and pregnancy. It is also used for diarrhea, dysentery, irritable bowel syndrome (IBS), reducing high cholesterol, and treating cancer.

La planification préalable des soins pour les patients en pédiatrie

PubMed Central

2008-01-01

RÉSUMÉ Les progrès médicaux et technologiques ont permis d’ac-croître les taux de survie et d’améliorer la qualité de vie des nourrissons, des enfants et des adolescents ayant des maladies chroniques mettant la vie en danger. La planifi-cation préalable des soins inclut le processus relié aux discussions sur les traitements essentiels au maintien de la survie et la détermination des objectifs des soins de longue durée. Les dispensateurs de soins pédiatriques ont l’obligation éthique d’assimiler cet aspect des soins médicaux. Le présent document de principes vise à aider les dispensateurs de soins à discuter de la planification préalable des soins des patients pédiatriques dans diverses situations. La planification préalable des soins exige des communications efficaces afin de clarifier les objectifs des soins et de s’entendre sur les traitements pertinents ou non pour réaliser ces objectifs, y compris les mesures de réanimation et les mesures palliatives.

Cartographie T

NASA Astrophysics Data System (ADS)

Cote, Jean-Charles

Les cartographies T1 par séquences d'échos stimulés et Look- Locker sont les plus communément utilisées pour mesurer les temps de relaxation T 1 en imagerie par résonance magnétique (IRM). Elles ont des performances d'usage clinique, ne prenant que quelques minutes pour produire une carte des valeurs de T1. Ces séquences demeurent cependant très sensibles à la précision des pulses radiofréquences (RF) qui réorientent l'aimantation pour produire les signaux mesurés. Les pulses RF rectangulaires régulièrement utilisés en IRM produisent un basculement de l'aimantation directement proportionnel à l'intensité du champ magnétique B 1 produit par l'antenne émettrice. Les antennes cliniques ont des distributions de champs B1 qui fluctuent énormément. En exemple, l'antenne servant à produire des images de la tête possède un champ B1 qui est distribué dans son volume utile sur une plage allant de 0,5 à 1,2 relativement à son centre. Cette variation spatiale de B1 entraîne des erreurs systématiques sur les valeurs ajustées de T1 dépassant les 50%. Le développement d'un nouveau concept d'excitation RF à approche tangentielle ayant des propriétés adiabatiques pouvant remplacer les demi-passages adiabatiques (AHP) et son utilisation sous la forme d'un BIR-4-S2 (B1-Insensitive Rotation-4 AHP-Sequentialized 2 steps) dans les séquences de cartographie T1 a permis de réduire à moins de 10% les erreurs systématiques dans le cas mesuré par échos stimulés compensés et à moins de 5% pour le Look-Locker. Le BIR-4-S2 possède une imprécision sur l'angle de basculement de moins de 5° sur une plage relative allant de 0,75 à 1,75 autour d'un champ de référence B1 ref, pour un choix de basculement sur 360°. Et, contrairement aux pulses adiabatiques, il demeure un pulse RF tridimentionnel (3D) à faible puissance pouvant être utilisé à répétition cliniquement sans risque d'échauffement dangereux pour les patients. La séquence d'échos stimulés compensés dont nous avons parlé ci-haut utilise un autre de nos développements: la compensation. Le signal produit par une séquence traditionnelle d'échos stimulés tend vers zéro en suivant la relaxation T1 dans le temps. Parfois ceci cause des problèmes lorsque le signal des derniers échos commence à être influencé par le bruit. La compensation a pour effet de modifier la décroissance exponentielle du signal. Ce changement s'opère en tenant compte de la relaxation T1 lors du calcul des angles de basculement nécessaire à la séquence. La compensation transfère une partie de la demande du volume de signal des premiers échos vers les derniers. On peut compenser entièrement et ainsi programmer une séquence qui produira des signaux égaux entre tous les échos ou compenser partiellement pour soutenir les signaux des derniers échos en conservant un maximum de signal total.

Modulation of dimerization by residues distant from the interface in bovine neurophysin-II.

PubMed

Zheng, C; Peyton, D; Breslow, E

1997-09-01

The crystal structure of bovine neurophysin-II in its liganded state (Chen et al. [1991] Proc. Natl. Acad. Sci. USA 88, 4240-4244) indicates that the 1-6 sequence has a disordered conformation, lacks noncovalent contacts to other regions of the protein and is distant from the monomer-monomer interface. Cleavage of the 1-6 sequence by Staphylococcus protease V8 yielded a protein that, for the first time, crystallized in both liganded and unliganded states. Insights into the role of the 1-6 sequence in the unliganded state were obtained by NMR and related biophysical comparisons of the native and des-1-6 proteins. NMR spectra demonstrated that the environment and/or conformation of residues in the 1-6 sequence differed in liganded and unliganded states. Additionally, the unliganded des-1-6 protein exhibited a dimerization constant four to five times that of the native protein, potentially accounting for the observation that its peptide affinity was also increased. NMR studies further indicated that the increased dimerization constant of the des-1-6 protein correlated with the presence in the native protein of two isoenergetic forms of the monomer, in contrast to only a single form in the des-1-6 protein, as evidenced by signals from an internal dimerization-sensitive alpha-proton. Thus, the 1-6 sequence reduces the dimerization constant by stabilization of an alternative monomer conformation. A second product of Staphylococcus protease V8 digestion of the native protein was identified as the des-1-6 protein with an internal clip after binding site residue Glu-47, the clip presumably breaking the short 3,10 helix that most directly connects the interface to the interface to the binding site. This product, although unable to bind peptide, retained the dimerization constant of the des-1-6 protein, suggesting a lack of importance of the helix in dimerization and contrasting with the effects of the 1-6 sequence. A model is proposed in which the 1-6 sequence stabilizes the second conformation of the unliganded monomer via interactions affecting the loop region that separates the two neurophysin domains and which has been shown to influence neurophysin self-association.

Doppler transcranien au cours de la drépanocytose chez l'enfant Malagasy

PubMed Central

Herinirina, Nicolas Fanantenana; Rajaonarison, Lova Hasina Ny Ony Narindra; Herijoelison, Andry Roussel; Rakoto, Olivat Aimée Alson; Ahmad, Ahmad

2016-01-01

Introduction Le doppler transcrânien est un outil efficace permettant de dépister les enfants drépanocytaires à risque d'AVC. Méthodes Nous avons réalisé une étude descriptive transversale sur des enfants Malagasy âgés entre 24 mois et 15 ans (groupe 1: 57 drépanocytaires, groupe 2: 43 témoins) afin d’évaluer le profil vélocimétrique des artères cérébrales chez les drépanocytaires. Un examen Doppler transcrânien a été réalisé avec étude des flux sanguins cérébraux chez les enfants des deux groupes. Résultats Pour les sujets drépanocytaires, la vitesse moyenne (VM) de l'artère cérébrale moyenne était de 100,9 ± 26,8 cm/s, l'indice de pulsatilité (IP) de 0,73 ± 0,20, la différence entre les artères cérébrales moyennes droite et gauche (ACMr) de 19,8 ± 21,5 cm/s, le rapport des vitesses de l'artère cérébrale antérieure/artère cérébrale moyenne (ACA/ACM) de 0,7 ± 0,2. Pour les enfants non drépanocytaires, VM: 80,6 ± 19,3 cm/s, IP: 0,79 ± 0,14, ACMr: 17 ± 20,1 cm/s, ACA/ACM: 0,8 ± 0,2. La vélocité des enfants drépanocytaires était supérieure au groupe contrôle. Les vitesses ont été corrélées avec le taux d'hémoglobine et l’âge et non pas avec le sexe et le volume globulaire moyen. Conclusion Les vitesses circulatoires cérébrales sont élevées chez les drépanocytaires que les enfants non drépanocytaires et sont influencées par le taux d'hémoglobine et l’âge. PMID:27516829

A PAndAS view of the resolved stellar populations in M31 dwarf elliptical satellites

NASA Astrophysics Data System (ADS)

Crnojević, D.; PAndAS Collaboration

We present the first truly global view of the closest elliptical galaxies, the dwarf elliptical (dE) companions of M31 NGC147 and NGC185. We exploit the deep PAndAS photometric dataset in order to investigate the resolved stellar content and structure of these dEs out to larger distances than ever previously probed. From the analysis of their old red giant branch stars, we derive density maps, full surface brightness profiles and metallicity distribution functions. We find that NGC147 shows pronounced tidal tails likely due to its interaction with M31, while NGC185 retains a regular elliptical shape over its entire extent. The two dEs follow a Sersic profile out to ˜5 kpc, and the effective radii derived in this study are a factor of two larger than previous literature values. While NGC185 shows a significant gradient in metallicity (˜-0.05 dex/kpc), this is almost absent in NGC147. The detailed understanding of nearby dEs is crucial for the studies of more distant objects, and we discuss how internal and environmental processes could have influenced the evolution of NGC147 and NGC185 in light of our results.

Impacte des maladies immunitaires sur la grossesse expérience du Service de Gynécologie Obstétrique de l'hôpital Militaire Moulay Ismail

PubMed Central

Laghzaoui, Omar

2016-01-01

L'influence du statut hormonal au cours des maladies auto-immunes est clairement établie, avec une prévalence maximale pendant la période d'activité génitale d'où l'intérêt de notre étude rétrospective de 32 dossiers de patientes enceintes présentant des pathologies auto-immunes. Les rechutes de la maladie au cours de la grossesse sont surtout observées chez les gestantes présentant le Lupus érythémateux disséminé et la maladie de Behçet alors qu'en poste partum les complications sont observées en cas de polyarthrite rhumatoïde, sclérose en plaque et la sclérodermie. Les complications fœtales dépendent du stade et du type de la maladie auto immune ainsi que l'association à d'autres pathologies. La prise en charge multi disciplinaire et l'ajustement du traitement abouti à stabiliser la maladie auto immune et améliore le pronostique fœtale. PMID:27648118

Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

PubMed Central

Kahan, Meldon; Wilson, Lynn; Mailis-Gagnon, Angela; Srivastava, Anita

2011-01-01

Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique sur la prescription d’opioïdes à des populations particulières en se fondant sur les recommandations faites dans les lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale en insistant plus précisément sur les études de l’efficacité et de la sécurité des opioïdes dans des populations particulières. Message principal Les médecins de famille peuvent atténuer les risques de surdose, de sédation, d’usage abusif et de dépendance grâce à des stratégies adaptées à l’âge et à l’état de santé des patients. Dans le cas de patients à risque de dépendance, on devrait réserver les opioïdes aux douleurs nociceptives ou neuropathiques bien définies qui n’ont pas répondu aux traitements de première intention. Il faut procéder lentement au titrage des opioïdes, avec des dispensations fréquentes et une étroite surveillance pour dépister tout signe d’usage abusif. Une dépendance aux opioïdes suspectée est prise en charge au moyen d’une thérapie structurée aux opioïdes, d’un traitement à la méthadone ou à la buprénorphine ou encore d’un traitement fondé sur l’abstinence. Les patients souffrant de troubles de l’humeur ou d’anxiété ont tendance à avoir une réponse analgésique atténuée aux opioïdes, sont à risque plus élevé d’usage abusif et prennent souvent des sédatifs qui interagissent défavorablement avec les opioïdes. Il faut prendre des précautions semblables à celles utilisées avec d’autres patients à risque élevé. Il faut faire un sevrage progressif si la douleur du patient demeure sévère même avec un essai adéquat de thérapie aux opioïdes. Chez les personnes âgées, la sédation, les chutes et la surdose peuvent être minimisées en utilisant des doses initiales faibles, un titrage plus lent, un sevrage des benzodiazépines et une bonne éducation des patients. Dans le cas des femmes enceintes qui prennent des opioïdes chaque jour, il faut faire un sevrage progressif et cesser complètement. Si ce n’est pas possible, il faut administrer la dose efficace la plus faible. Les femmes enceintes qui ont une dépendance aux opioïdes devraient recevoir un traitement à la méthadone. Les adolescents sont à risque élevé de surdose d’opioïdes, d’usage abusif et de dépendance. Les patients qui ont des adolescents qui vivent à la maison devraient entreposer leurs opioïdes dans un lieu sûr. Les adolescents ont rarement besoin d’une thérapie à long terme aux opioïdes. Conclusion Les médecins de famille doivent tenir compte de l’âge, de la condition psychiatrique, du degré de risque de dépendance du patient et d’autres facteurs quand ils prescrivent des opioïdes pour la douleur chronique.

Military Command Team Effectiveness: Model and Instrument for Assessment and Improvement (L’efficacite des Equipes de Commandement Militaires: un Modele et un Instrument Pour L’evaluation et L’amelioration)

DTIC Science & Technology

2005-04-01

influence team performance (e.g., Gender , race, age) (Morgan and Lassiter, 1992). • Leadership – the deliberate attempt to influence team outcomes...members of an organisation to be subject to an implicit socialisation process that brings members’ belief structures, values and goals into line with...Bowers, 1999). • Mix of Demographic Characteristics (e.g., age, gender , ethnicity, and culture). Whether more homogeneity or more heterogeneity is