Ultrasmooth, extremely deformable and shape recoverable Ag nanowire embedded transparent electrode

PubMed Central

Nam, Sanggil; Song, Myungkwan; Kim, Dong-Ho; Cho, Byungjin; Lee, Hye Moon; Kwon, Jung-Dae; Park, Sung-Gyu; Nam, Kee-Seok; Jeong, Yongsoo; Kwon, Se-Hun; Park, Yun Chang; Jin, Sung-Ho; Kang, Jae-Wook; Jo, Sungjin; Kim, Chang Su

2014-01-01

Transparent electrodes have been widely used in electronic devices such as solar cells, displays, and touch screens. Highly flexible transparent electrodes are especially desired for the development of next generation flexible electronic devices. Although indium tin oxide (ITO) is the most commonly used material for the fabrication of transparent electrodes, its brittleness and growing cost limit its utility for flexible electronic devices. Therefore, the need for new transparent conductive materials with superior mechanical properties is clear and urgent. Ag nanowire (AgNW) has been attracting increasing attention because of its effective combination of electrical and optical properties. However, it still suffers from several drawbacks, including large surface roughness, instability against oxidation and moisture, and poor adhesion to substrates. These issues need to be addressed before wide spread use of metallic NW as transparent electrodes can be realized. In this study, we demonstrated the fabrication of a flexible transparent electrode with superior mechanical, electrical and optical properties by embedding a AgNW film into a transparent polymer matrix. This technique can produce electrodes with an ultrasmooth and extremely deformable transparent electrode that have sheet resistance and transmittance comparable to those of an ITO electrode. PMID:24763248

Ultrasmooth, extremely deformable and shape recoverable Ag nanowire embedded transparent electrode.

PubMed

Nam, Sanggil; Song, Myungkwan; Kim, Dong-Ho; Cho, Byungjin; Lee, Hye Moon; Kwon, Jung-Dae; Park, Sung-Gyu; Nam, Kee-Seok; Jeong, Yongsoo; Kwon, Se-Hun; Park, Yun Chang; Jin, Sung-Ho; Kang, Jae-Wook; Jo, Sungjin; Kim, Chang Su

2014-04-25

Transparent electrodes have been widely used in electronic devices such as solar cells, displays, and touch screens. Highly flexible transparent electrodes are especially desired for the development of next generation flexible electronic devices. Although indium tin oxide (ITO) is the most commonly used material for the fabrication of transparent electrodes, its brittleness and growing cost limit its utility for flexible electronic devices. Therefore, the need for new transparent conductive materials with superior mechanical properties is clear and urgent. Ag nanowire (AgNW) has been attracting increasing attention because of its effective combination of electrical and optical properties. However, it still suffers from several drawbacks, including large surface roughness, instability against oxidation and moisture, and poor adhesion to substrates. These issues need to be addressed before wide spread use of metallic NW as transparent electrodes can be realized. In this study, we demonstrated the fabrication of a flexible transparent electrode with superior mechanical, electrical and optical properties by embedding a AgNW film into a transparent polymer matrix. This technique can produce electrodes with an ultrasmooth and extremely deformable transparent electrode that have sheet resistance and transmittance comparable to those of an ITO electrode.

Clear as glass: transparent financial reporting.

PubMed

Valletta, Robert M

2005-08-01

To be transparent, financial information needs to be easily accessible, timely, content-rich, and narrative. Not-for-profit hospitals and health systems should report detailed financial information quarterly. They need internal controls to reduce the level of complexity throughout the organization by creating standardized processes.

Transparency in Europe: A Quantitative Study.

PubMed

Bouder, Frederic; Way, Dominic; Löfstedt, Ragnar; Evensen, Darrick

2015-07-01

In recent years, European pharmaceutical regulators have increasingly committed to heightening access to raw safety-related data as part of a wave of transparency initiatives (e.g., providing public Internet-mediated access to clinical trials data). Yet, the regulators--who are under significant pressure--have not yet benefited from a systematic review of this new policy. In seeking to inject much needed evidence, this article explores the effects of new transparency policies designed to promote meaningful communication of risks and benefits to patients. Results of a cross-national European survey with respondents from Great Britain, the Netherlands, Spain, France, Germany, and Sweden (N = 5,648) shed light on how patients and the public are likely to react to the regulators' new transparency policies. The findings demonstrate clear national variations in how European citizens are likely to react and emphasize the need to develop evidence-based, reasoned transparency policies that integrate benefit-risk communication. The authors conclude by providing six specific recommendations, informed by the study, that seek to improve the European transparency model both within the medical field and across health, safety, and environmental policy domains. © 2015 Society for Risk Analysis.

Designing and implementing transparency for real time inspection of autonomous robots

NASA Astrophysics Data System (ADS)

Theodorou, Andreas; Wortham, Robert H.; Bryson, Joanna J.

2017-07-01

The EPSRC's Principles of Robotics advises the implementation of transparency in robotic systems, however research related to AI transparency is in its infancy. This paper introduces the reader of the importance of having transparent inspection of intelligent agents and provides guidance for good practice when developing such agents. By considering and expanding upon other prominent definitions found in literature, we provide a robust definition of transparency as a mechanism to expose the decision-making of a robot. The paper continues by addressing potential design decisions developers need to consider when designing and developing transparent systems. Finally, we describe our new interactive intelligence editor, designed to visualise, develop and debug real-time intelligence.

Producing high-quality negatives from ERTS black-and-white transparancies

Treesearch

Richard J. Myhre

1973-01-01

A method has been devised for producing high-quality black-and-white negatives quickly and efficiently from dense transparencies orgininating from Earth Resources Technology Satellite imagery. Transparencies are evaluated on a standard light source to determine exposure and processing information needed for making negatives. A “System ASA Rating” was developed by...

Transparency Film for Demonstration of Biaxial Optics.

ERIC Educational Resources Information Center

Camp, Paul R.

1994-01-01

Explains why transparency film demonstrates biaxial optical properties. Provides detailed descriptions of the procedure and equipment needed for large-scale optics demonstrations of the polarization interference pattern produced by biaxial crystals. (DDR)

Transparency and public involvement in animal research.

PubMed

Pound, Pandora; Blaug, Ricardo

2016-05-01

To be legitimate, research needs to be ethical, methodologically sound, of sufficient value to justify public expenditure and be transparent. Animal research has always been contested on ethical grounds, but there is now mounting evidence of poor scientific method, and growing doubts about its clinical value. So what of transparency? Here we examine the increasing focus on openness within animal research in the UK, analysing recent developments within the Home Office and within the main group representing the interests of the sector, Understanding Animal Research. We argue that, while important steps are being taken toward greater transparency, the legitimacy of animal research continues to be undermined by selective openness. We propose that openness could be increased through public involvement, and that this would bring about much needed improvements in animal research, as it has done in clinical research. 2016 FRAME.

75 FR 81365 - Call for Information: Information on Inputs to Emission Equations Under the Mandatory Reporting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... consider a long-term approach that will balance data quality and transparency with the reporting businesses... balances data quality and transparency with the need to protect sensitive business information. When EPA...

Accuracy versus transparency in pharmacoeconomic modelling: finding the right balance.

PubMed

Eddy, David M

2006-01-01

As modellers push to make their models more accurate, the ability of others to understand the models can decrease, causing the models to lose transparency. When this type of conflict between accuracy and transparency occurs, the question arises, "Where do we want to operate on that spectrum?" This paper argues that in such cases we should give absolute priority to accuracy: push for whatever degree of accuracy is needed to answer the question being asked, try to maximise transparency within that constraint, and find other ways to replace what we wanted to get from transparency. There are several reasons. The fundamental purpose of a model is to help us get the right answer to a question and, by any measure, the expected value of a model is proportional to its accuracy. Ironically, we use transparency as a way to judge accuracy. But transparency is not a very powerful or useful way to do this. It rarely enables us to actually replicate the model's results and, even if we could, replication would not tell us the model's accuracy. Transparency rarely provides even face validity; from the content expert's perspective, the simplifications that modellers have to make usually raise more questions than they answer. Transparency does enable modellers to alert users to weaknesses in their models, but that can be achieved simply by listing the model's limitations and does not get us any closer to real accuracy. Sensitivity analysis tests the importance of uncertainty about the variables in a model, but does not tell us about the variables that were omitted or the structure of the model. What people really want to know is whether a model actually works. Transparency by itself can't answer this; only demonstrations that the model accurately calculates or predicts real events can. Rigorous simulations of clinical trials are a good place to start. This is the type of empirical validation we need to provide if the potential of mathematical models in pharmacoeconomics is to be fully achieved.

Multimodal sensing strategies for detecting transparent barriers indoors from a mobile platform

NASA Astrophysics Data System (ADS)

Acevedo, Isaiah; Kleine, R. Kaleb; Kraus, Dustan; Mascareñas, David

2015-04-01

There is currently an interest in developing mobile sensing platforms that fly indoors. The primary goal for these platforms is to be able to successfully navigate a building under various lighting and environmental conditions. There are numerous research challenges associated with this goal, one of which is the platform's ability to detect and identify the presence of transparent barriers. Transparent barriers could include windows, glass partitions, or skylights. For example, in order to successfully navigate inside of a structure, these platforms will need to sense if a space contains a transparent barrier and whether or not this space can be traversed. This project's focus has been developing a multimodal sensing system that can successfully identify such transparent barriers under various lighting conditions while aboard a mobile platform. Along with detecting transparent barriers, this sensing platform is capable of distinguishing between reflective, opaque, and transparent barriers. It will be critical for this system to be able to identify transparent barriers in real-time in order for the navigation system to maneuver accordingly. The properties associated with the interaction between various frequencies of light and transparent materials were one of the techniques leveraged to solve this problem.

Embedded Ag Grid Electrodes as Current Collector for Ultraflexible Transparent Solid-State Supercapacitor.

PubMed

Xu, Jian-Long; Liu, Yan-Hua; Gao, Xu; Sun, Yilin; Shen, Su; Cai, Xinlei; Chen, Linsen; Wang, Sui-Dong

2017-08-23

Flexible transparent solid-state supercapacitors have attracted immerse attention for the power supply of next-generation flexible "see-through" or "invisible" electronics. For fabrication of such devices, high-performance flexible transparent current collectors are highly desired. In this paper, the utilization of embedded Ag grid transparent conductive electrodes (TCEs) fabricated by a facile soft ultraviolet imprinting lithography method combined with scrap techniques, as the current collector for flexible transparent solid-state supercapacitors, is demonstrated. The embedded Ag grid TCEs exhibit not only excellent optoelectronic properties (R S ∼ 2.0 Ω sq -1 and T ∼ 89.74%) but also robust mechanical properties, which could meet the conductivity, transparency, and flexibility needs of current collectors for flexible transparent supercapacitors. The obtained supercapacitor exhibits large specific capacitance, long cycling life, high optical transparency (T ∼ 80.58% at 550 nm), high flexibility, and high stability. Owing to the embedded Ag grid TCE structure, the device shows a slight capacitance loss of 2.6% even after 1000 cycles of repetitive bending for a bending radius of up to 2.0 mm. This paves the way for developing high-performance current collectors and thus flexible transparent energy storage devices, and their general applicability opens up opportunities for flexible transparent electronics.

Transparent Seismic Mitigation for Community Resilience

NASA Astrophysics Data System (ADS)

Poland, C. D.; Pekelnicky, R.

2008-12-01

Healthy communities continuously grow by leveraging their intellectual capital to drive economic development while protecting their cultural heritage. Success, in part, depends on the support of a healthy built environment that is rooted in contemporary urban planning, sustainability and disaster resilience. Planners and policy makers are deeply concerned with all aspects of their communities, including its seismic safety. Their reluctance to implement the latest plans for achieving seismic safety is rooted in a misunderstanding of the hazard they face and the risk it poses to their built environment. Probabilistic lingo and public debate about how big the "big one" will be drives them to resort to their own experience and intuition. There is a fundamental lack of transparency related to what is expected to happen, and it is partially blocking the policy changes that are needed. The solution: craft the message in broad based, usable terms that name the hazard, defines performance, and establishes a set of performance goals that represent the resiliency needed to drive a community's natural ability to rebound from a major seismic event. By using transparent goals and measures with an intuitive vocabulary for both performance and hazard, earthquake professionals, working with the San Francisco Urban Planning and Research Association (SPUR), have defined a level of resiliency that needs to be achieved by the City of San Francisco to assure their response to an event will be manageable and full recovery achievable within three years. Five performance measures for buildings and three for lifeline systems have been defined. Each declares whether people will be safe inside, whether the building will be able to be repaired and whether they will be usable during repairs. Lifeline systems are further defined in terms of the time intervals to restore 90%, 95%, and full service. These transparent categories are used in conjunction with the expected earthquake level to describe the standards needed for new buildings and lifelines and the rehabilitation programs needed for existing buildings and systems. Earthquake professionals -- Emergency Response Planners, Earth Scientists, and Earthquake Engineers - need to embrace this level of transparency and work with their communities to craft the policies needed to instill change and achieve disaster resilience.

Supporting Authentic Learning Contexts Beyond Classroom Walls

NASA Astrophysics Data System (ADS)

Herrington, Jan; Specht, Marcus; Brickell, Gwyn; Harper, Barry

At the classroom level, contexts for learning are often limited in the experiential component. Teachers and trainers feel overwhelmed by the difficulty of inventing authentic learning contexts, and creating tasks that truly reflect the way knowledge would be used in the real world (Herrington et al. 2004). However, there are growing numbers of examples of how such authentic learning environments are being used in schools, higher education, and professional development in a variety of contexts and discipline areas, such as in literacy education (Ferry et al. 2006), in physical activity fitness and health (Rice et al. 1999), in Indigenous education (Marshall et al. 2001), in evaluation (Agostinho 2006), in multimedia and ICT (Bennett et al. 2001), in literature (Fitzsimmons 2006), and in business writing (Pennell et al. 1997). Teachers and trainers who subscribe to this approach to learning can be very inventive in developing learner perceptions of authentic contexts, but often financial, situational and time constraints limit the experiential elements of authentic learning settings.

Transparent graphene microstrip filters for wireless communications

NASA Astrophysics Data System (ADS)

Wang, Jinchen; Guan, Yifei; Yu, Hua; Li, Na; Wang, Shuopei; Shen, Cheng; Dai, Zhijiang; Gan, Decheng; Yang, Rong; He, Songbai; Zhang, Guangyu

2017-08-01

A microstrip is an indispensable component for wireless communication circuits. With the development of 5G technology, optically transparent microstrip filters urgently need to be developed. In this work, we have theoretically and experimentally demonstrated the immense potential of graphene microstrips for transparent wireless communication circuits in the 5G era. Both wideband and dual-band transparent graphene microstrip filters have shown more than 80% optical transmissivity in the region from 250 nm to 2000 nm with good frequency responses. S and C band microwave signals can transmit along the graphene microstrip lines effectively while coupling excitations produce relatively large insertion losses. Our results show that transparent microstrips designed with high-quality graphene will largely scale down the size of the wireless devices and thus play an irreplaceable role in the 5G era.

Report: EPA Needs Policies and Procedures to Manage Public Pesticide Petitions in a Transparent and Efficient Manner

EPA Pesticide Factsheets

Report #16-P-0019, October 27, 2015. OPP’s lack of policies and procedures to manage public pesticide petitions in a transparent and efficient manner can result in unreasonable delay lawsuits costing the agency time and resources.

Working toward Transparency in Library Automation

ERIC Educational Resources Information Center

Breeding, Marshall

2007-01-01

In this article, the author argues the need for transparency with regard to the automation systems used in libraries. As librarians make decisions regarding automation software and services, they should have convenient access to information about the organizations it will potentially acquire technology from and about the collective experiences of…

Tackling Production Techniques: Telling Tales with Transparencies.

ERIC Educational Resources Information Center

Martin, Ron

1986-01-01

This lesson introduces students to procedures for creating both hand-drawn and machine-made transparencies and requires each of them to create one example to illustrate the same story. Detailed plans include performance objectives, materials needed, instructions for presenting the lesson, a sample student task card, and suggestions for evaluating…

Effects of Transparency on Pilot Trust and Agreement in the Autonomous Constrained Flight Planner

NASA Technical Reports Server (NTRS)

Sadler, Garrett; Battiste, Henri; Ho, Nhut; Hoffmann, Lauren; Lyons, Joseph; Johnson, Walter; Shively, Robert; Smith, David

2016-01-01

We performed a human-in-the-loop study to explore the role of transparency in engendering trust and reliance within highly automated systems. Specifically, we examined how transparency impacts trust in and reliance upon the Autonomous Constrained Flight Planner (ACFP), a critical automated system being developed as part of NASA's Reduced Crew Operations (RCO) Concept. The ACFP is designed to provide an enhanced ground operator, termed a super dispatcher, with recommended diversions for aircraft when their primary destinations are unavailable. In the current study, 12 commercial transport rated pilots who played the role of super dispatchers were given six time-pressured all land scenarios where they needed to use the ACFP to determine diversions for multiple aircraft. Two factors were manipulated. The primary factor was level of transparency. In low transparency scenarios the pilots were given a recommended airport and runway, plus basic information about the weather conditions, the aircraft types, and the airport and runway characteristics at that and other airports. In moderate transparency scenarios the pilots were also given a risk evaluation for the recommended airport, and for the other airports if they requested it. In the high transparency scenario additional information including the reasoning for the risk evaluations was made available to the pilots. The secondary factor was level of risk, either high or low. For high-risk aircraft, all potential diversions were rated as highly risky, with the ACFP giving the best option for a bad situation. For low-risk aircraft the ACFP found only low-risk options for the pilot. Both subjective and objective measures were collected, including rated trust, whether the pilots checked the validity of the automation recommendation, and whether the pilots eventually flew to the recommended diversion airport. Key results show that: 1) Pilots trust increased with higher levels of transparency, 2) Pilots were more likely to verify ACFPs recommendations with low levels of transparency and when risk was high, 3) Pilots were more likely to explore other options from the ACFP in low transparency conditions and when risk was high, and 4) Pilots decision to accept or reject ACFPs recommendations increased as a function of the transparency in the explanation. The finding that higher levels of transparency was coupled with higher levels of trust, a lower need to verify other options, and higher levels of agreement with ACFP recommendations, confirms the importance of transparency in aiding reliance on automated recommendations. Additional analyses of qualitative data gathered from subjects through surveys and during debriefing interviews also provided the basis for new design recommendations for the ACFP.

Exploiting both optical and electrical anisotropy in nanowire electrodes for higher transparency.

PubMed

Dong, Jianjin; Goldthorpe, Irene A

2018-01-26

Transparent electrodes such as indium tin oxide and random meshes of silver nanowires (AgNWs) have isotropic in-plane properties. However, we show that imparting some alignment to AgNWs can create anisotropic transparency and electrical conductivity characteristics that may benefit many applications. For example, liquid crystal displays and the touch sensors on top of them often only need to be transparent to one type of polarized light as well as predominantly conductive in only one direction. Herein, AgNWs are slightly preferentially aligned during their deposition by rod coating. Compared to randomly oriented AgNW films, the alignment boosts the transparency to perpendicularly polarized light, as well as achieves a higher transparency for a given sheet resistance in one direction compared to randomly oriented AgNWs films. These factors together increase the transparency of a 16 Ω/sq electrode by 7.3 percentage points. The alignment technique is cheap and scalable, compatible with roll-to-roll processes, and most importantly does not require extra processing steps, as rod coating is already a standard process for AgNW electrode fabrication.

Exploiting both optical and electrical anisotropy in nanowire electrodes for higher transparency

NASA Astrophysics Data System (ADS)

Dong, Jianjin; Goldthorpe, Irene A.

2018-01-01

Transparent electrodes such as indium tin oxide and random meshes of silver nanowires (AgNWs) have isotropic in-plane properties. However, we show that imparting some alignment to AgNWs can create anisotropic transparency and electrical conductivity characteristics that may benefit many applications. For example, liquid crystal displays and the touch sensors on top of them often only need to be transparent to one type of polarized light as well as predominantly conductive in only one direction. Herein, AgNWs are slightly preferentially aligned during their deposition by rod coating. Compared to randomly oriented AgNW films, the alignment boosts the transparency to perpendicularly polarized light, as well as achieves a higher transparency for a given sheet resistance in one direction compared to randomly oriented AgNWs films. These factors together increase the transparency of a 16 Ω/sq electrode by 7.3 percentage points. The alignment technique is cheap and scalable, compatible with roll-to-roll processes, and most importantly does not require extra processing steps, as rod coating is already a standard process for AgNW electrode fabrication.

Mosaic Transparent Armor System Final Report CRADA No. TC02162.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuntz, J. D.; Breslin, M.

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and The Protective Group, Inc. (TPG) to improve the performance of the mosaic transparent armor system (MTAS) for transparent armor applications, military and civilian. LLNL was to provide the unique MTAS technology and designs to TPG for innovative construction and ballistic testing of improvements needed for current and near future application of the armor windows on vehicles and aircraft. The goal of the project was to advance the technology of MTAS to the point that these mosaic transparent windowsmore » would be introduced and commercially manufactured for military vehicles and aircraft.« less

Who Uses a Price Transparency Tool? Implications for Increasing Consumer Engagement.

PubMed

Gourevitch, Rebecca A; Desai, Sunita; Hicks, Andrew L; Hatfield, Laura A; Chernew, Michael E; Mehrotra, Ateev

2017-01-01

Despite the recent proliferation of price transparency tools, consumer use and awareness of these tools is low. Better strategies to increase the use of price transparency tools are needed. To inform such efforts, we studied who is most likely to use a price transparency tool. We conducted a cross-sectional study of use of the Truven Treatment Cost Calculator among employees at 2 large companies for the 12 months following the introduction of the tool in 2011-2012. We examined frequency of sign-ons and used multivariate logistic regression to identify which demographic and health care factors were associated with greater use of the tool. Among the 70 408 families offered the tool, 7885 (11%) used it at least once and 854 (1%) used it at least 3 times in the study period. Greater use of the tool was associated with younger age, living in a higher income community, and having a higher deductible. Families with moderate annual out-of-pocket medical spending ($1000-$2779) were also more likely to use the tool. Consistent with prior work, we find use of this price transparency tool is low and not sustained over time. Employers and payers need to pursue strategies to increase interest in and engagement with health care price information, particularly among consumers with higher medical spending.

Scribed transparency microplates mounted on a modified standard microplate.

PubMed

Cheong, Brandon Huey-Ping; Chua, Wei Seong; Liew, Oi Wah; Ng, Tuck Wah

2014-08-01

The immense cost effectiveness of using transparencies as analyte handling implements in microplate instrumentation offers the possibility of application even in resource-limited laboratories. In this work, a standard microplate was adapted to serve as the permanent base for disposable scribed transparencies. The approach is shown to ameliorate evaporation, which can affect assay accuracy when analytes need to be incubated for some time. It also offers assurance against fluorescence measurement errors due to the cross-talk of samples from adjacent wells. Copyright © 2014 Elsevier Inc. All rights reserved.

Off the Charts: Medical documentation and selective redaction in the age of transparency.

PubMed

McCarthy, Matthew William; de Asua, Diego Real; Gabbay, Ezra; Fins, Joseph J

2018-01-01

A growing demand for transparency in medicine has the potential to strain the doctor-patient relationship. While information can empower patients, unrestricted patient access to the electronic medical record may have unintended consequences. Medical documentation is often written in language that is inaccessible to people without medical training, and without guidance, patients have no way to interpret the constellation of acronyms, diagnoses, treatments, impressions, and arguments that appear throughout their own chart. Additionally, full transparency may not allow physicians the intellectual or clinical freedom they need to authentically express questions, problematic impressions, and concerns about the patient's clinical and psychosocial issues. This article examines the ethical challenges of transparency in the digital era and suggests that selective redaction may serve as a means to maintain transparency, affirm physician's discretion, and uphold the core values of the doctor-patient relationship amidst disruptive technological change.

EV-TRACK: transparent reporting and centralizing knowledge in extracellular vesicle research.

PubMed

Van Deun, Jan; Mestdagh, Pieter; Agostinis, Patrizia; Akay, Özden; Anand, Sushma; Anckaert, Jasper; Martinez, Zoraida Andreu; Baetens, Tine; Beghein, Els; Bertier, Laurence; Berx, Geert; Boere, Janneke; Boukouris, Stephanie; Bremer, Michel; Buschmann, Dominik; Byrd, James B; Casert, Clara; Cheng, Lesley; Cmoch, Anna; Daveloose, Delphine; De Smedt, Eva; Demirsoy, Seyma; Depoorter, Victoria; Dhondt, Bert; Driedonks, Tom A P; Dudek, Aleksandra; Elsharawy, Abdou; Floris, Ilaria; Foers, Andrew D; Gärtner, Kathrin; Garg, Abhishek D; Geeurickx, Edward; Gettemans, Jan; Ghazavi, Farzaneh; Giebel, Bernd; Kormelink, Tom Groot; Hancock, Grace; Helsmoortel, Hetty; Hill, Andrew F; Hyenne, Vincent; Kalra, Hina; Kim, David; Kowal, Joanna; Kraemer, Sandra; Leidinger, Petra; Leonelli, Carina; Liang, Yaxuan; Lippens, Lien; Liu, Shu; Lo Cicero, Alessandra; Martin, Shaun; Mathivanan, Suresh; Mathiyalagan, Prabhu; Matusek, Támas; Milani, Gloria; Monguió-Tortajada, Marta; Mus, Liselot M; Muth, Dillon C; Németh, Andrea; Nolte-'t Hoen, Esther N M; O'Driscoll, Lorraine; Palmulli, Roberta; Pfaffl, Michael W; Primdal-Bengtson, Bjarke; Romano, Erminia; Rousseau, Quentin; Sahoo, Susmita; Sampaio, Natalia; Samuel, Monisha; Scicluna, Benjamin; Soen, Bieke; Steels, Anneleen; Swinnen, Johannes V; Takatalo, Maarit; Thaminy, Safia; Théry, Clotilde; Tulkens, Joeri; Van Audenhove, Isabel; van der Grein, Susanne; Van Goethem, Alan; van Herwijnen, Martijn J; Van Niel, Guillaume; Van Roy, Nadine; Van Vliet, Alexander R; Vandamme, Niels; Vanhauwaert, Suzanne; Vergauwen, Glenn; Verweij, Frederik; Wallaert, Annelynn; Wauben, Marca; Witwer, Kenneth W; Zonneveld, Marijke I; De Wever, Olivier; Vandesompele, Jo; Hendrix, An

2017-02-28

We argue that the field of extracellular vesicle (EV) biology needs more transparent reporting to facilitate interpretation and replication of experiments. To achieve this, we describe EV-TRACK, a crowdsourcing knowledgebase (http://evtrack.org) that centralizes EV biology and methodology with the goal of stimulating authors, reviewers, editors and funders to put experimental guidelines into practice.

Totally embedded hybrid thin films of carbon nanotubes and silver nanowires as flat homogenous flexible transparent conductors.

PubMed

Pillai, Suresh Kumar Raman; Wang, Jing; Wang, Yilei; Sk, Md Moniruzzaman; Prakoso, Ari Bimo; Rusli; Chan-Park, Mary B

2016-12-08

There is a great need for viable alternatives to today's transparent conductive film using largely indium tin oxide. We report the fabrication of a new type of flexible transparent conductive film using silver nanowires (AgNW) and single-walled carbon nanotube (SWCNT) networks which are fully embedded in a UV curable resin substrate. The hybrid SWCNTs-AgNWs film is relatively flat so that the RMS roughness of the top surface of the film is 3 nm. Addition of SWCNTs networks make the film resistance uniform; without SWCNTs, sheet resistance of the surface composed of just AgNWs in resin varies from 20 Ω/sq to 10 7  Ω/sq. With addition of SWCNTs embedded in the resin, sheet resistance of the hybrid film is 29 ± 5 Ω/sq and uniform across the 47 mm diameter film discs; further, the optimized film has 85% transparency. Our lamination-transfer UV process doesn't need solvent for sacrificial substrate removal and leads to good mechanical interlocking of the nano-material networks. Additionally, electrochemical study of the film for supercapacitors application showed an impressive 10 times higher current in cyclic voltammograms compared to the control without SWCNTs. Our fabrication method is simple, cost effective and enables the large-scale fabrication of flat and flexible transparent conductive films.

Totally embedded hybrid thin films of carbon nanotubes and silver nanowires as flat homogenous flexible transparent conductors

NASA Astrophysics Data System (ADS)

Pillai, Suresh Kumar Raman; Wang, Jing; Wang, Yilei; Sk, Md Moniruzzaman; Prakoso, Ari Bimo; Rusli; Chan-Park, Mary B.

2016-12-01

There is a great need for viable alternatives to today’s transparent conductive film using largely indium tin oxide. We report the fabrication of a new type of flexible transparent conductive film using silver nanowires (AgNW) and single-walled carbon nanotube (SWCNT) networks which are fully embedded in a UV curable resin substrate. The hybrid SWCNTs-AgNWs film is relatively flat so that the RMS roughness of the top surface of the film is 3 nm. Addition of SWCNTs networks make the film resistance uniform; without SWCNTs, sheet resistance of the surface composed of just AgNWs in resin varies from 20 Ω/sq to 107 Ω/sq. With addition of SWCNTs embedded in the resin, sheet resistance of the hybrid film is 29 ± 5 Ω/sq and uniform across the 47 mm diameter film discs; further, the optimized film has 85% transparency. Our lamination-transfer UV process doesn’t need solvent for sacrificial substrate removal and leads to good mechanical interlocking of the nano-material networks. Additionally, electrochemical study of the film for supercapacitors application showed an impressive 10 times higher current in cyclic voltammograms compared to the control without SWCNTs. Our fabrication method is simple, cost effective and enables the large-scale fabrication of flat and flexible transparent conductive films.

Totally embedded hybrid thin films of carbon nanotubes and silver nanowires as flat homogenous flexible transparent conductors

PubMed Central

Pillai, Suresh Kumar Raman; Wang, Jing; Wang, Yilei; Sk, Md Moniruzzaman; Prakoso, Ari Bimo; Rusli; Chan-Park, Mary B.

2016-01-01

There is a great need for viable alternatives to today’s transparent conductive film using largely indium tin oxide. We report the fabrication of a new type of flexible transparent conductive film using silver nanowires (AgNW) and single-walled carbon nanotube (SWCNT) networks which are fully embedded in a UV curable resin substrate. The hybrid SWCNTs-AgNWs film is relatively flat so that the RMS roughness of the top surface of the film is 3 nm. Addition of SWCNTs networks make the film resistance uniform; without SWCNTs, sheet resistance of the surface composed of just AgNWs in resin varies from 20 Ω/sq to 107 Ω/sq. With addition of SWCNTs embedded in the resin, sheet resistance of the hybrid film is 29 ± 5 Ω/sq and uniform across the 47 mm diameter film discs; further, the optimized film has 85% transparency. Our lamination-transfer UV process doesn’t need solvent for sacrificial substrate removal and leads to good mechanical interlocking of the nano-material networks. Additionally, electrochemical study of the film for supercapacitors application showed an impressive 10 times higher current in cyclic voltammograms compared to the control without SWCNTs. Our fabrication method is simple, cost effective and enables the large-scale fabrication of flat and flexible transparent conductive films. PMID:27929125

How To Set Up Your Own Small Business. Volumes I-II and Overhead Transparencies.

ERIC Educational Resources Information Center

Fallek, Max

This two-volume textbook and collection of overhead transparency masters is intended for use in a course in setting up a small business. The following topics are covered in the first volume: getting off to a good start, doing market research, forecasting sales, financing a small business, understanding the different legal needs of different types…

All-in-one visual and computer decoding of multiple secrets: translated-flip VC with polynomial-style sharing

NASA Astrophysics Data System (ADS)

Wu, Chia-Hua; Lee, Suiang-Shyan; Lin, Ja-Chen

2017-06-01

This all-in-one hiding method creates two transparencies that have several decoding options: visual decoding with or without translation flipping and computer decoding. In visual decoding, two less-important (or fake) binary secret images S1 and S2 can be revealed. S1 is viewed by the direct stacking of two transparencies. S2 is viewed by flipping one transparency and translating the other to a specified coordinate before stacking. Finally, important/true secret files can be decrypted by a computer using the information extracted from transparencies. The encoding process to hide this information includes the translated-flip visual cryptography, block types, the ways to use polynomial-style sharing, and linear congruential generator. If a thief obtained both transparencies, which are stored in distinct places, he still needs to find the values of keys used in computer decoding to break through after viewing S1 and/or S2 by stacking. However, the thief might just try every other kind of stacking and finally quit finding more secrets; for computer decoding is totally different from stacking decoding. Unlike traditional image hiding that uses images as host media, our method hides fine gray-level images in binary transparencies. Thus, our host media are transparencies. Comparisons and analysis are provided.

[Non-randomized evaluation studies (TREND)].

PubMed

Vallvé, Carles; Artés, Maite; Cobo, Erik

2005-12-01

Nonrandomized intervention trials are needed when randomized clinical trials cannot be performed. To report the results from nonrandomized intervention studies transparently, the TREND (Transparent Reporting of Evaluations with Nonrandomized Designs) checklist should be used. This implies that nonrandomized studies should follow the remaining methodological tools usually employed in randomized trials and that the uncertainty introduced by the allocation mechanism should be explicitly reported and, if possible, quantified.

Coping in the World of Work. Practice in Problem Solving. Masters, Handouts and Transparencies. Research and Development Series No. 120C.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational Education.

Master handouts and transparencies needed for activities and instruction are contained in this document, which is part of a career development unit on coping in the world of work designed to assist students in developing coping strategies to deal with work entry and job adjustment problems. (Other components of the unit--instructor's handbook,…

Trials, tricks and transparency: how disclosure rules affect clinical knowledge.

PubMed

Dahm, Matthias; González, Paula; Porteiro, Nicolás

2009-12-01

Scandals of selective reporting of clinical trial results by pharmaceutical firms have underlined the need for more transparency in clinical trials. We provide a theoretical framework which reproduces incentives for selective reporting and yields three key implications concerning regulation. First, a compulsory clinical trial registry complemented through a voluntary clinical trial results database can implement full transparency (the existence of all trials as well as their results is known). Second, full transparency comes at a price. It has a deterrence effect on the incentives to conduct clinical trials, as it reduces the firms' gains from trials. Third, in principle, a voluntary clinical trial results database without a compulsory registry is a superior regulatory tool; but we provide some qualified support for additional compulsory registries when medical decision-makers cannot anticipate correctly the drug companies' decisions whether to conduct trials.

Application of low-coherence interferometry for in situ nondestructive evaluation of thin and thick multilayered transparent composites

NASA Astrophysics Data System (ADS)

Khomenko, Anton; Cloud, Gary Lee; Haq, Mahmoodul

2015-12-01

Multilayered transparent composites having laminates with polymer interlayers and backing sheets are commonly used in a wide range of applications where visibility, transparency, impact resistance, and safety are essential. Manufacturing flaws or damage during operation can seriously compromise both safety and performance. Most fabrication defects are not discernible until after the entire multilayered transparent composite assembly has been completed, and in-the-field inspection for damage is a problem not yet solved. A robust and reliable nondestructive evaluation (NDE) technique is needed to evaluate structural integrity and identify defects that result from manufacturing issues as well as in-service damage arising from extreme environmental conditions in addition to normal mechanical and thermal loads. Current optical techniques have limited applicability for NDE of such structures. This work presents a technique that employs a modified interferometer utilizing a laser diode or femtosecond fiber laser source to acquire in situ defect depth location inside a thin or thick multilayered transparent composite, respectively. The technique successfully located various defects inside examined composites. The results show great potential of the technique for defect detection, location, and identification in multilayered transparent composites.

Transparent, flexible, and high-performance supercapacitor based on ultrafine nickel cobaltite nanospheres

NASA Astrophysics Data System (ADS)

Liu, Xinyue; Wang, Jianxing; Yang, Guowei

2017-07-01

There has been growing interest in transparent and flexible electronic devices such as wrist watch, cell phone, and so on. These devices need the power sources which also have transparent and flexible features. Here, we demonstrate a transparent and flexible energy storage device with outstanding electrochemical performance, high energy density, and super-long life based on ultrafine NiCo2O4 nanospheres which are synthesized by an innovative method concerning laser ablation in liquid and hydrothermal process. The ultrafine NiCo2O4 nanospheres provide high electrochemical activity and the synthesized colloidal solution is suitable for transparent devices. The transparent and flexible device shows a high specific capacitance of 299.7 F/g at the scan rate of 1 mV/s and a long cycling life of 90.4% retention rate after 10,000 cycles at a scan rate of 10 mV/s, which is superior to that of previously reported transparent and flexible energy storage device. In addition, an optical transmittance up to 55% at the wavelength of 550 nm is obtained, and the bending test shows that the bending angle makes no difference to the specific capacitance of the device. In addition, it shows an outstanding energy density of 10.41 Wh/kg. The integrated electrochemical performances of the device are good based on NiCo2O4 nanospheres. These findings make the ultrafine NiCo2O4 nanospheres being promising electrode materials for transparent and flexible energy storage devices.

Transparent electrode for optical switch

DOEpatents

Goldhar, J.; Henesian, M.A.

1984-10-19

The invention relates generally to optical switches and techniques for applying a voltage to an electro-optical crystal, and more particularly, to transparent electodes for an optical switch. System architectures for very large inertial confinement fusion (ICF) lasers require active optical elements with apertures on the order of one meter. Large aperture optical switches are needed for isolation of stages, switch-out from regenerative amplifier cavities and protection from target retroreflections.

Inventory transparency for agricultural produce through IOT

NASA Astrophysics Data System (ADS)

Srinivasan, S. P.; Sorna Shanthi, D.; Anand, Aashish V.

2017-06-01

Re-structuring the practices of traditional inventory management is becoming more essential to optimize the supply chain transparency and accuracy of agricultural produce. A flexible and transparent inventory management system is becoming the need of any agricultural commodity. It was noticed that the major setback for the farmers who are the suppliers of the farm produce is due to poor supply chain integration. The recent advent technologies and IT explosion can bring up a greater impact in the process of storing, tracking, distributing and monitoring perishable agriculture produce of day to day life. The primary focus of this paper is to integrate IoT into inventory management and other inbound logistics management of agriculture produce. The unique features of agricultural produce like a prediction of supply, demand, the location of warehouses, distribution and tracking of inventory can be integrated through IoT. This paper proposes a conceptual framework for inventory management transparency involved in the supply chain of agriculture produce.

From Information to Urban Sustainability through Innovations in Citizen Centered Transparency Mechanism

NASA Astrophysics Data System (ADS)

Tiwari, A.

2017-12-01

Current urban information mechanisms in developing countries operate only through linear exchanges between institutions and users and therefore reinforce hierarchical relationships. Coupled with conflicting interests and perspectives of stakeholders in multilevel climate-governance and absence of grassroots information-networking for adaptation decision-making, there are therefore, existing information gaps. Central to urban sustainability is the need for citizen centered transparency (CCT) mechanisms that encompass and address the needs of the marginalized and vulnerable communities in developing countries especially. The study discloses the existing information gaps through information-needs assessment of stakeholders, and attempts to chart the desired course for responsible action within frame-work of Citizen Centered Transparency (CCT) mechanism. This involved analysis of several urban development projects for Indian metropolitans that mainly involved end-user association, and the parameters considered for breaking complexity for assessment included: a. Feedback: Ends-user feedback to improve resource consumption literacy and consequently urban behaviour and sustainable lifestyles(feedback technology, consumption displays, eco-labeling, billing, advisory services, sensor technology), and b. Administrative Traditions and Institutional Policy: Rewarding-punishing to enforce desired action(subsidies, taxation). The research thus answered: 1.Who gets the information whereas who requires it (Equity in Information Distribution)? and 2. How can information translate to responsible action in future (Transparency of Execution)? Findings suggested that, how, by using the CCT innovations it is practically possible to embed responsibilities in urban development planning, and manifesting environmental goals in municipal policies so that they bear clear potential short-term benefits, short-term costs, and have maximum compliance with the objectives of sustainable urban development.

Is your article EV-TRACKed?

PubMed

Van Deun, Jan; Hendrix, An

2017-01-01

The EV-TRACK knowledgebase is developed to cope with the need for transparency and rigour to increase reproducibility and facilitate standardization of extracellular vesicle (EV) research. The knowledgebase includes a checklist for authors and editors intended to improve the transparency of methodological aspects of EV experiments, allows queries and meta-analysis of EV experiments and keeps track of the current state of the art. Widespread implementation by the EV research community is key to its success.

Partially Transparent Petaled Mask/Occulter for Visible-Range Spectrum

NASA Technical Reports Server (NTRS)

Shiri, Ron Shahram; Wasylkiwskyj, Wasyl

2013-01-01

The presence of the Poisson Spot, also known as the spot of Arago, has been known since the 18th century. This spot is the consequence of constructive interference of light diffracted by the edge of the obstacle where the central position can be determined by symmetry of the object. More recently, many NASA missions require the suppression of this spot in the visible range. For instance, the exoplanetary missions involving space telescopes require telescopes to image the planetary bodies orbiting central stars. For this purpose, the starlight needs to be suppressed by several orders of magnitude in order to image the reflected light from the orbiting planet. For the Earth-like planets, this suppression needs to be at least ten orders of magnitude. One of the common methods of suppression involves sharp binary petaled occulters envisioned to be placed many thousands of miles away from the telescope blocking the starlight. The suppression of the Poisson Spot by binary sharp petal tips can be problematic when the thickness of the tips becomes smaller than the wavelength of the incident beam. First they are difficult to manufacture and also it invalidates the laws of physical optics. The proposed partially transparent petaled masks/occulters compensate for this sharpness with transparency along the surface of the petals. Depending on the geometry of the problem, this transparency can be customized such that only a small region of the petal is transparent and the remaining of the surface is opaque. This feature allows easy fabrication of this type of occultation device either as a mask or occulter. A partially transparent petaled mask/ occulter has been designed for the visible spectrum range. The mask/occulter can suppress the intensity along the optical axis up to ten orders of magnitude. The design process can tailor the mask shape, number of petals, and transparency level to the near-field and farfield diffraction region. The mask/occulter can be used in space astronomy, ground-based telescope, and high-energy laser systems, and optical lithography to eliminate the Poisson Spot.

Peer Review Quality and Transparency of the Peer-Review Process in Open Access and Subscription Journals.

PubMed

Wicherts, Jelte M

2016-01-01

Recent controversies highlighting substandard peer review in Open Access (OA) and traditional (subscription) journals have increased the need for authors, funders, publishers, and institutions to assure quality of peer-review in academic journals. I propose that transparency of the peer-review process may be seen as an indicator of the quality of peer-review, and develop and validate a tool enabling different stakeholders to assess transparency of the peer-review process. Based on editorial guidelines and best practices, I developed a 14-item tool to rate transparency of the peer-review process on the basis of journals' websites. In Study 1, a random sample of 231 authors of papers in 92 subscription journals in different fields rated transparency of the journals that published their work. Authors' ratings of the transparency were positively associated with quality of the peer-review process but unrelated to journal's impact factors. In Study 2, 20 experts on OA publishing assessed the transparency of established (non-OA) journals, OA journals categorized as being published by potential predatory publishers, and journals from the Directory of Open Access Journals (DOAJ). Results show high reliability across items (α = .91) and sufficient reliability across raters. Ratings differentiated the three types of journals well. In Study 3, academic librarians rated a random sample of 140 DOAJ journals and another 54 journals that had received a hoax paper written by Bohannon to test peer-review quality. Journals with higher transparency ratings were less likely to accept the flawed paper and showed higher impact as measured by the h5 index from Google Scholar. The tool to assess transparency of the peer-review process at academic journals shows promising reliability and validity. The transparency of the peer-review process can be seen as an indicator of peer-review quality allowing the tool to be used to predict academic quality in new journals.

Peer Review Quality and Transparency of the Peer-Review Process in Open Access and Subscription Journals

PubMed Central

Wicherts, Jelte M.

2016-01-01

Background Recent controversies highlighting substandard peer review in Open Access (OA) and traditional (subscription) journals have increased the need for authors, funders, publishers, and institutions to assure quality of peer-review in academic journals. I propose that transparency of the peer-review process may be seen as an indicator of the quality of peer-review, and develop and validate a tool enabling different stakeholders to assess transparency of the peer-review process. Methods and Findings Based on editorial guidelines and best practices, I developed a 14-item tool to rate transparency of the peer-review process on the basis of journals’ websites. In Study 1, a random sample of 231 authors of papers in 92 subscription journals in different fields rated transparency of the journals that published their work. Authors’ ratings of the transparency were positively associated with quality of the peer-review process but unrelated to journal’s impact factors. In Study 2, 20 experts on OA publishing assessed the transparency of established (non-OA) journals, OA journals categorized as being published by potential predatory publishers, and journals from the Directory of Open Access Journals (DOAJ). Results show high reliability across items (α = .91) and sufficient reliability across raters. Ratings differentiated the three types of journals well. In Study 3, academic librarians rated a random sample of 140 DOAJ journals and another 54 journals that had received a hoax paper written by Bohannon to test peer-review quality. Journals with higher transparency ratings were less likely to accept the flawed paper and showed higher impact as measured by the h5 index from Google Scholar. Conclusions The tool to assess transparency of the peer-review process at academic journals shows promising reliability and validity. The transparency of the peer-review process can be seen as an indicator of peer-review quality allowing the tool to be used to predict academic quality in new journals. PMID:26824759

Identification, Characterization, and Mapping of a Novel SNP Associated with Body Color Transparency in Juvenile Red Sea Bream (Pagrus major).

PubMed

Sawayama, Eitaro; Noguchi, Daiki; Nakayama, Kei; Takagi, Motohiro

2018-03-23

We previously reported a body color deformity in juvenile red sea bream, which shows transparency in the juvenile stage because of delayed chromatophore development compared with normal individuals, and this finding suggested a genetic cause based on parentage assessments. To conduct marker-assisted selection to eliminate broodstock inheriting the causative gene, developing DNA markers associated with the phenotype was needed. We first conducted SNP mining based on AFLP analysis using bulked-DNA from normal and transparent individuals. One SNP was identified from a transparent-specific AFLP fragment, which significantly associated with transparent individuals. Two alleles (A/G) were observed in this locus, and the genotype G/G was dominantly observed in the transparent groups (97.1%) collected from several production lots produced from different broodstock populations. A few normal individuals inherited the G/G genotype (5.0%), but the A/A and A/G genotypes were dominantly observed in the normal groups. The homologs region of the SNP was searched using a medaka genome database, and intron 12 of the Nell2a gene (located on chromosome 6 of the medaka genome) was highly matched. We also mapped the red sea bream Nell2a gene on the previously developed linkage maps, and this gene was mapped on a male linkage group, LG4-M. The newly found SNP was useful in eliminating broodstock possessing the causative gene of the body color transparency observed in juvenile stage of red sea bream.

Beyond Wiki to Judgewiki for Transparent Climate Change Decisions

NASA Astrophysics Data System (ADS)

Capron, M. E.

2008-12-01

Climate Change is like the prisoner's dilemma, a zero-sum game, or cheating in sports. Everyone and every country is tempted to selfishly maintain or advance their standard of living. The tremendous difference between standards of living amplifies the desire to opt out of Climate Change solutions adverse to economic competitiveness. Climate Change is also exceedingly complex. No one person, one organization, one country, or partial collection of countries has the capacity and the global support needed to make decisions on Climate Change solutions. There are thousands of potential actions, tens of thousands of known and unknown environmental and economic impacts. Some actions are belatedly found to be unsustainable beyond token volumes, corn ethanol or soy-biodiesel for example. Mankind can address human nature and complexity with a globally transparent information and decision process available to all 7 billion of us. We need a process that builds trust and simplifies complexity. Fortunately, we have the Internet for trust building communication and computers to simplify complexity. Mankind can produce new software tailored to the challenge. We would combine group information collection software (a wiki) with a decision-matrix (a judge), market forecasting, and video games to produce the tool mankind needs for trust building transparent decisions on Climate Change actions. The resulting software would be a judgewiki.

Is your article EV-TRACKed?

PubMed Central

Van Deun, Jan; Hendrix, An

2017-01-01

ABSTRACT The EV-TRACK knowledgebase is developed to cope with the need for transparency and rigour to increase reproducibility and facilitate standardization of extracellular vesicle (EV) research. The knowledgebase includes a checklist for authors and editors intended to improve the transparency of methodological aspects of EV experiments, allows queries and meta-analysis of EV experiments and keeps track of the current state of the art. Widespread implementation by the EV research community is key to its success. PMID:29184624

Explicitly covariant dispersion relations and self-induced transparency

NASA Astrophysics Data System (ADS)

Mahajan, S. M.; Asenjo, Felipe A.

2017-02-01

Explicitly covariant dispersion relations for a variety of plasma waves in unmagnetized and magnetized plasmas are derived in a systematic manner from a fully covariant plasma formulation. One needs to invoke relatively little known invariant combinations constructed from the ambient electromagnetic fields and the wave vector to accomplish the program. The implication of this work applied to the self-induced transparency effect is discussed. Some problems arising from the inconsistent use of relativity are pointed out.

A Practical Guide for Improving Transparency and Reproducibility in Neuroimaging Research

PubMed Central

Poldrack, Russell A.

2016-01-01

Recent years have seen an increase in alarming signals regarding the lack of replicability in neuroscience, psychology, and other related fields. To avoid a widespread crisis in neuroimaging research and consequent loss of credibility in the public eye, we need to improve how we do science. This article aims to be a practical guide for researchers at any stage of their careers that will help them make their research more reproducible and transparent while minimizing the additional effort that this might require. The guide covers three major topics in open science (data, code, and publications) and offers practical advice as well as highlighting advantages of adopting more open research practices that go beyond improved transparency and reproducibility. PMID:27389358

Statistical Learning Analysis in Neuroscience: Aiming for Transparency

PubMed Central

Hanke, Michael; Halchenko, Yaroslav O.; Haxby, James V.; Pollmann, Stefan

2009-01-01

Encouraged by a rise of reciprocal interest between the machine learning and neuroscience communities, several recent studies have demonstrated the explanatory power of statistical learning techniques for the analysis of neural data. In order to facilitate a wider adoption of these methods, neuroscientific research needs to ensure a maximum of transparency to allow for comprehensive evaluation of the employed procedures. We argue that such transparency requires “neuroscience-aware” technology for the performance of multivariate pattern analyses of neural data that can be documented in a comprehensive, yet comprehensible way. Recently, we introduced PyMVPA, a specialized Python framework for machine learning based data analysis that addresses this demand. Here, we review its features and applicability to various neural data modalities. PMID:20582270

Optically transparent and durable Al2O3 coatings for harsh environments by ultra short pulsed laser deposition

NASA Astrophysics Data System (ADS)

Korhonen, Hannu; Syväluoto, Aki; Leskinen, Jari T. T.; Lappalainen, Reijo

2018-01-01

Nowadays, an environmental protection is needed for a number of optical applications in conditions quickly impairing the clarity of optical surfaces. Abrasion resistant optical coatings applied onto plastics are usually based on alumina or polysiloxane technology. In many applications transparent glasses and ceramics need a combination of abrasive and chemically resistant shielding or other protective solutions like coatings. In this study, we intended to test our hypothesis that clear and pore free alumina coating can be uniformly distributed on glass prisms by ultra short pulsed laser deposition (USPLD) technique to protect the sensitive surfaces against abrasives. Abrasive wear tests were carried out by the use of SiC emery paper using specified standard procedures. After the wear tests the measured transparencies of coated prisms turned out to be close those of the prisms before coating. The coating on sensitive surfaces consistently displayed enhanced wear resistance exhibiting still high quality, even after severe wear testing. Furthermore, the coating modified the surface properties towards hydrophobic nature in contrast to untreated prisms, which became very hydrophilic especially due to wear.

Measuring orthographic transparency and morphological-syllabic complexity in alphabetic orthographies: a narrative review.

PubMed

Borleffs, Elisabeth; Maassen, Ben A M; Lyytinen, Heikki; Zwarts, Frans

2017-01-01

This narrative review discusses quantitative indices measuring differences between alphabetic languages that are related to the process of word recognition. The specific orthography that a child is acquiring has been identified as a central element influencing reading acquisition and dyslexia. However, the development of reliable metrics to measure differences between language scripts hasn't received much attention so far. This paper therefore reviews metrics proposed in the literature for quantifying orthographic transparency, syllabic complexity, and morphological complexity of alphabetic languages. The review included searches of Web of Science, PubMed, PsychInfo, Google Scholar, and various online sources. Search terms pertained to orthographic transparency, morphological complexity, and syllabic complexity in relation to reading acquisition, and dyslexia. Although the predictive value of these metrics is promising, more research is needed to validate the value of the metrics discussed and to understand the 'developmental footprint' of orthographic transparency, morphological complexity, and syllabic complexity in the lexical organization and processing strategies.

Analysis of an anti-reflecting nanowire transparent electrode for solar cells

NASA Astrophysics Data System (ADS)

Zhao, Zhexin; Wang, Ken Xingze; Fan, Shanhui

2017-03-01

Transparent electrodes are an important component in many optoelectronic devices, especially solar cells. In this paper, we investigate a nanowire transparent electrode that also functions as an anti-reflection coating for silicon solar cells, taking into account the practical constraints that the electrode is typically encapsulated and needs to be in electric contact with the semiconductor. Numerical simulations show that the electrode can provide near-perfect broadband anti-reflection over much of the frequency range above the silicon band gap for both polarizations while keeping the sheet resistance sufficiently low. To provide insights into the physics mechanism of this broadband anti-reflection, we introduce a generalized Fabry-Perot model, which captures the effects of the higher order diffraction channels as well as the modification of the reflection coefficient of the interface introduced by the nanowires. This model is validated using frequency-domain electromagnetic simulations. Our work here provides design guidelines for nanowire transparent electrode in a device configuration that is relevant for solar cell applications.

Perspectives on clinical trial data transparency and disclosure.

PubMed

Alemayehu, Demissie; Anziano, Richard J; Levenstein, Marcia

2014-09-01

The increased demand for transparency and disclosure of data from clinical trials sponsored by pharmaceutical companies poses considerable challenges and opportunities from a statistical perspective. A central issue is the need to protect patient privacy and adhere to Good Clinical and Statistical Practices, while ensuring access to patient-level data from clinical trials to the wider research community. This paper offers options to navigate this dilemma and balance competing priorities, with emphasis on the role of good clinical and statistical practices as proven safeguards for scientific integrity, the importance of adopting best practices for reporting of data from secondary analyses, and the need for optimal collaboration among stakeholders to facilitate data sharing. Copyright © 2014 Elsevier Inc. All rights reserved.

Co-Percolating Graphene-Wrapped Silver Nanowire Network for High Performance, Highly Stable, Transparent Conducting Electrodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Ruiyi; Das, Suprem R.; Jeong, Changwook

Transparent conducting electrodes (TCEs) require high transparency and low sheet resistance for applications in photovoltaics, photodetectors, flat panel displays, touch screen devices and imagers. Indium tin oxide (ITO), or other transparent conductive oxides, have typically been used, and provide a baseline sheet resistance (RS) vs. transparency (T) relationship. However, ITO is relatively expensive (due to limited abundance of Indium), brittle, unstable, and inflexible; moreover, ITO transparency drops rapidly for wavelengths above 1000 nm. Motivated by a need for transparent conductors with comparable (or better) RS at a given T, as well as flexible structures, several alternative material systems have beenmore » investigated. Single-layer graphene (SLG) or few-layer graphene provide sufficiently high transparency (≈97% per layer) to be a potential replacement for ITO. However, large-area synthesis approaches, including chemical vapor deposition (CVD), typically yield films with relatively high sheet resistance due to small grain sizes and high-resistance grain boundaries (HGBs). In this paper, we report a hybrid structure employing a CVD SLG film and a network of silver nanowires (AgNWs): RS as low as 22 Ω/ (stabilized to 13 Ω/ after 4 months) have been observed at high transparency (88% at λ = 550 nm) in hybrid structures employing relatively low-cost commercial graphene with a starting RS of 770 Ω/. This sheet resistance is superior to typical reported values for ITO, comparable to the best reported TCEs employing graphene and/or random nanowire networks, and the film properties exhibit impressive stability under mechanical pressure, mechanical bending and over time. The design is inspired by the theory of a co-percolating network where conduction bottlenecks of a 2D film (e.g., SLG, MoS2) are circumvented by a 1D network (e.g., AgNWs, CNTs) and vice versa. The development of these high-performance hybrid structures provides a route towards robust, scalable and low-cost approaches for realizing high-performance TCE.« less

Transparency in Ecology and Evolution: Real Problems, Real Solutions.

PubMed

Parker, Timothy H; Forstmeier, Wolfgang; Koricheva, Julia; Fidler, Fiona; Hadfield, Jarrod D; Chee, Yung En; Kelly, Clint D; Gurevitch, Jessica; Nakagawa, Shinichi

2016-09-01

To make progress scientists need to know what other researchers have found and how they found it. However, transparency is often insufficient across much of ecology and evolution. Researchers often fail to report results and methods in detail sufficient to permit interpretation and meta-analysis, and many results go entirely unreported. Further, these unreported results are often a biased subset. Thus the conclusions we can draw from the published literature are themselves often biased and sometimes might be entirely incorrect. Fortunately there is a movement across empirical disciplines, and now within ecology and evolution, to shape editorial policies to better promote transparency. This can be done by either requiring more disclosure by scientists or by developing incentives to encourage disclosure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Silver nanowires network encapsulated by low temperature sol-gel ZnO for transparent flexible electrodes with ambient stability

NASA Astrophysics Data System (ADS)

Shin, Wonjung; Cho, Wonki; Baik, Seung Jae

2018-01-01

As a geometrically engineered realization of transparent electrode, Ag nanowires network is promising for its superior characteristics both on electrical conductivity and optical transmittance. However, for a potential commercialization of Ag nanowires network, further investigations on encapsulation materials are necessary to prevent degradation caused by ambient aging. In addition, the temperature range of the coating process for the encapsulation material needs to be low enough to prevent degradation of polymer substrates during the film coating processes, when considering emerging flexible device application of transparent electrodes. We present experimental results showing that low temperature sol-gel ZnO processed under 130 °C is an effective encapsulation material preventing ambient oxidation of Ag nanowires network without degrading electrical, optical, and mechanical properties.

Using Framework Analysis in nursing research: a worked example.

PubMed

Ward, Deborah J; Furber, Christine; Tierney, Stephanie; Swallow, Veronica

2013-11-01

To demonstrate Framework Analysis using a worked example and to illustrate how criticisms of qualitative data analysis including issues of clarity and transparency can be addressed. Critics of the analysis of qualitative data sometimes cite lack of clarity and transparency about analytical procedures; this can deter nurse researchers from undertaking qualitative studies. Framework Analysis is flexible, systematic, and rigorous, offering clarity, transparency, an audit trail, an option for theme-based and case-based analysis and for readily retrievable data. This paper offers further explanation of the process undertaken which is illustrated with a worked example. Data were collected from 31 nursing students in 2009 using semi-structured interviews. The data collected are not reported directly here but used as a worked example for the five steps of Framework Analysis. Suggestions are provided to guide researchers through essential steps in undertaking Framework Analysis. The benefits and limitations of Framework Analysis are discussed. Nurses increasingly use qualitative research methods and need to use an analysis approach that offers transparency and rigour which Framework Analysis can provide. Nurse researchers may find the detailed critique of Framework Analysis presented in this paper a useful resource when designing and conducting qualitative studies. Qualitative data analysis presents challenges in relation to the volume and complexity of data obtained and the need to present an 'audit trail' for those using the research findings. Framework Analysis is an appropriate, rigorous and systematic method for undertaking qualitative analysis. © 2013 Blackwell Publishing Ltd.

The Need of an Open Data Quality Policy: The Case of the "Transparency - Health" Database in the Prevention of Conflict of Interest.

PubMed

Jantzen, Rodolphe; Rance, Bastien; Katsahian, Sandrine; Burgun, Anita; Looten, Vincent

2018-01-01

Open data available largely and with minimal constraints to the general public and journalists are needed to help rebuild trust between citizens and the health system. By opening data, we can expect to increase the democratic accountability, the self-empowerment of citizens. This article aims at assessing the quality and reusability of the Transparency - Health database with regards to the FAIR principles. More specifically, we observe the quality of the identity of the French medical doctors in the Transp-db. This study shows that the quality of the data in the Transp-db does not allow to identity with certainty those who benefit from an advantage or remuneration to be confirmed, reducing noticeably the impact of the open data effort.

Informing Healthcare Waiting Area Design Using Transparency Attributes: A Comparative Preference Study.

PubMed

Jiang, Shan; Powers, Matthew; Allison, David; Vincent, Ellen

2017-07-01

This study aimed to explore people's visual preference for waiting areas in general hospital environments designed with transparency attributes that fully integrate nature. Waiting can be a tedious and frustrating experience among people seeking healthcare treatments and negatively affect their perception of the quality of care. Positive distractions and supportive designs have gained increasing attraction to improve people's waiting experience. Nature, which has shown therapeutic effects according to a growing amount of evidence, could be a distinguished positive distraction in waiting areas. Additionally, the theory of transparency was operationalized to indicate a spatial continuity between the external nature and the built interiors in general healthcare waiting area design. A survey method was adopted in the study. Twenty-one images of general healthcare waiting areas depicting three design typologies were preselected following a strict procedure, including designs with (a) no window views, (b) limited window views to nature, and (c) transparent spaces with maximum natural views. Ninety-five student participants rated the images based on their visual preference using a Likert-type scale. The results showed that transparent waiting areas were significantly preferred. A significant positive relationship existed between the level of transparency and people's preference scores. The factor analysis indicated additional supportive features that may affect people's preferences, including daylight, perceived warmth, noninstitutional furniture arrangement, visual orientation, and the use of natural materials for interior design. However, these tentative results need to be furthered tested with the real patient population as the next step of this study.

Conveying the 3D Shape of Transparent Surfaces Via Texture

NASA Technical Reports Server (NTRS)

Interrante, Victoria; Fuchs, Henry; Pizer, Stephen

1997-01-01

Transparency can be a useful device for depicting multiple overlapping surfaces in a single image. The challenge is to render the transparent surfaces in such a way that their three-dimensional shape can be readily understood and their depth distance from underlying structures clearly perceived. This paper describes our investigations into the use of sparsely-distributed discrete, opaque texture as an 'artistic device' for more explicitly indicating the relative depth of a transparent surface and for communicating the essential features of its 3D shape in an intuitively meaningful and minimally occluding way. The driving application for this work is the visualization of layered surfaces in radiation therapy treatment planning data, and the technique is illustrated on transparent isointensity surfaces of radiation dose. We describe the perceptual motivation and artistic inspiration for defining a stroke texture that is locally oriented in the direction of greatest normal curvature (and in which individual strokes are of a length proportional to the magnitude of the curvature in the direction they indicate), and discuss several alternative methods for applying this texture to isointensity surfaces defined in a volume. We propose an experimental paradigm for objectively measuring observers' ability to judge the shape and depth of a layered transparent surface, in the course of a task relevant to the needs of radiotherapy treatment planning, and use this paradigm to evaluate the practical effectiveness of our approach through a controlled observer experiment based on images generated from actual clinical data.

Smart glass based on electrochromic polymers

NASA Astrophysics Data System (ADS)

Xu, Chunye; Kong, Xiangxing; Liu, Lu; Su, Fengyu; Kim, Sooyeun; Taya, Minoru

2006-03-01

Five-layer-structured electrochromic glass (window), containing a transparent conductive layer, an electrochromic layer, an ionic conductive layer, an ionic storage layer and a second conductive transparent layer, was fabricated. The electrochromic glass adopts the conjugated polymer, poly[3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine] (PProDOT-Me2), as a blue electrochromic active layer, vanadium pentaoxide film as an ion storage layer and polymer gel electrolyte as the ionic transport layer. Dimension of smart glass up to 12 x 20 inch was developed. UV curable sealant was applied for the sealing devices. Color changing or switching speed of 12 x 20 inch smart glass from dark state to the transparent state (or vise versa) is less than 15 seconds under applied 1.5 voltages. Besides the long open circuit memory (the colored state or transparent state remains the same state after the power is off), the smart window can be adjusted easily into the intermediate state between the dark state and the transparent state by just simply turn the power on or off. No space consuming or dirt collecting shades, curtains or blinds are needed. The applications of the smart window, e.g. in the aircrafts, automobiles and architectures were discussed as well.

Reduced graphene oxide filled poly(dimethyl siloxane) based transparent stretchable, and touch-responsive sensors

NASA Astrophysics Data System (ADS)

Ponnamma, Deepalekshmi; Sadasivuni, Kishor Kumar; Cabibihan, John-John; Yoon, W. Jong; Kumar, Bijandra

2016-04-01

The ongoing revolution in touch panel technology and electronics demands the need for thin films, which are flexible, stretchable, conductive, and highly touch responsive. In this regard, conductive elastomer nanocomposites offer potential solutions for these stipulations; however, viability is limited to the poor dispersion of conductive nanomaterials such as graphene into the matrix. Here, we fabricated a reduced graphene oxide (rGO) and poly(dimethylsiloxane) (PDMS) elastomer based transparent and flexible conductive touch responsive film by dispersing rGO honeycombs uniformly into PDMS elastomer through an ionic liquid (IL) modification. Pursuing a simple, scalable, and safe method of solution casting, this provides a versatile and creative design of a transparent and stretchable rGO/IL-PDMS capacitive touch responsive, where rGO acts as a sensing element. This transparent film with ˜70% transmittance exhibits approximately a five times faster response in comparison to rGO/PDMS film, with negligible degradation over time. The performance of this touch screen film is expected to have applications in the emerging field of foldable electronics.

Reduced graphene oxide filled poly(dimethyl siloxane) based transparent stretchable, and touch-responsive sensors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ponnamma, Deepalekshmi; Sadasivuni, Kishor Kumar; Cabibihan, John-John

The ongoing revolution in touch panel technology and electronics demands the need for thin films, which are flexible, stretchable, conductive, and highly touch responsive. In this regard, conductive elastomer nanocomposites offer potential solutions for these stipulations; however, viability is limited to the poor dispersion of conductive nanomaterials such as graphene into the matrix. Here, we fabricated a reduced graphene oxide (rGO) and poly(dimethylsiloxane) (PDMS) elastomer based transparent and flexible conductive touch responsive film by dispersing rGO honeycombs uniformly into PDMS elastomer through an ionic liquid (IL) modification. Pursuing a simple, scalable, and safe method of solution casting, this provides amore » versatile and creative design of a transparent and stretchable rGO/IL-PDMS capacitive touch responsive, where rGO acts as a sensing element. This transparent film with ∼70% transmittance exhibits approximately a five times faster response in comparison to rGO/PDMS film, with negligible degradation over time. The performance of this touch screen film is expected to have applications in the emerging field of foldable electronics.« less

Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cells.

PubMed

Varghese, Oomman K; Paulose, Maggie; Grimes, Craig A

2009-09-01

Dye-sensitized solar cells consist of a random network of titania nanoparticles that serve both as a high-surface-area support for dye molecules and as an electron-transporting medium. Despite achieving high power conversion efficiencies, their performance is limited by electron trapping in the nanoparticle film. Electron diffusion lengths can be increased by transporting charge through highly ordered nanostructures such as titania nanotube arrays. Although titania nanotube array films have been shown to enhance the efficiencies of both charge collection and light harvesting, it has not been possible to grow them on transparent conducting oxide glass with the lengths needed for high-efficiency device applications (tens of micrometres). Here, we report the fabrication of transparent titania nanotube array films on transparent conducting oxide glass with lengths between 0.3 and 33.0 microm using a novel electrochemistry approach. Dye-sensitized solar cells containing these arrays yielded a power conversion efficiency of 6.9%. The incident photon-to-current conversion efficiency ranged from 70 to 80% for wavelengths between 450 and 650 nm.

"I spy, with my little sensor": fair data handling practices for robots between privacy, copyright and security

NASA Astrophysics Data System (ADS)

Schafer, Burkhard; Edwards, Lilian

2017-07-01

The paper suggests an amendment to Principle 4 of ethical robot design, and a demand for "transparency by design". It argues that while misleading vulnerable users as to the nature of a robot is a serious ethical issue, other forms of intentionally deceptive or unintentionally misleading aspects of robotic design pose challenges that are on the one hand more universal and harmful in their application, on the other more difficult to address consistently through design choices. The focus will be on transparent design regarding the sensory capacities of robots. Intuitive, low-tech but highly efficient privacy preserving behaviour is regularly dependent on an accurate understanding of surveillance risks. Design choices that hide, camouflage or misrepresent these capacities can undermine these strategies. However, formulating an ethical principle of "sensor transparency" is not straightforward, as openness can also lead to greater vulnerability and with that security risks. We argue that the discussion on sensor transparency needs to be embedded in a broader discussion of "fair data handling principles" for robots that involve issues of privacy, but also intellectual property rights such as copyright.

Transparent and flexible resistive switching memory devices with a very high ON/OFF ratio using gold nanoparticles embedded in a silk protein matrix

NASA Astrophysics Data System (ADS)

Gogurla, Narendar; Mondal, Suvra P.; Sinha, Arun K.; Katiyar, Ajit K.; Banerjee, Writam; Kundu, Subhas C.; Ray, Samit K.

2013-08-01

The growing demand for biomaterials for electrical and optical devices is motivated by the need to make building blocks for the next generation of printable bio-electronic devices. In this study, transparent and flexible resistive memory devices with a very high ON/OFF ratio incorporating gold nanoparticles into the Bombyx mori silk protein fibroin biopolymer are demonstrated. The novel electronic memory effect is based on filamentary switching, which leads to the occurrence of bistable states with an ON/OFF ratio larger than six orders of magnitude. The mechanism of this process is attributed to the formation of conductive filaments through silk fibroin and gold nanoparticles in the nanocomposite. The proposed hybrid bio-inorganic devices show promise for use in future flexible and transparent nanoelectronic systems.

Occupation-Specific VESL Needs Assessment. A VESL Staff Development Training Resource Packet.

ERIC Educational Resources Information Center

West, Linda; Wilkinson, Betty

Materials for a teacher workshop on assessing student needs for vocational English as a Second Language (VESL) are gathered. An annotated workshop outline presents the content and sequence of the workshop. Masters are provided for handouts and transparencies, which include an icebreaker activity, the workshop agenda, materials from the "Dictionary…

The Individualized Teacher Improvement Plan

ERIC Educational Resources Information Center

Hamlin, Erica

2013-01-01

This author states her belief that there must be an answer to devising an effective and credible way to link compensation to professional development and improved teaching. Such a model would need to be transparent, equitable, and financially manageable for the school. It would need to marry objectivity with the art of teaching, and have buy-in…

Scenarios for exercising technical approaches to verified nuclear reductions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doyle, James

2010-01-01

Presidents Obama and Medvedev in April 2009 committed to a continuing process of step-by-step nuclear arms reductions beyond the new START treaty that was signed April 8, 2010 and to the eventual goal of a world free of nuclear weapons. In addition, the US Nuclear Posture review released April 6, 2010 commits the US to initiate a comprehensive national research and development program to support continued progress toward a world free of nuclear weapons, including expanded work on verification technologies and the development of transparency measures. It is impossible to predict the specific directions that US-RU nuclear arms reductions willmore » take over the 5-10 years. Additional bilateral treaties could be reached requiring effective verification as indicated by statements made by the Obama administration. There could also be transparency agreements or other initiatives (unilateral, bilateral or multilateral) that require monitoring with a standard of verification lower than formal arms control, but still needing to establish confidence to domestic, bilateral and multilateral audiences that declared actions are implemented. The US Nuclear Posture Review and other statements give some indication of the kinds of actions and declarations that may need to be confirmed in a bilateral or multilateral setting. Several new elements of the nuclear arsenals could be directly limited. For example, it is likely that both strategic and nonstrategic nuclear warheads (deployed and in storage), warhead components, and aggregate stocks of such items could be accountable under a future treaty or transparency agreement. In addition, new initiatives or agreements may require the verified dismantlement of a certain number of nuclear warheads over a specified time period. Eventually procedures for confirming the elimination of nuclear warheads, components and fissile materials from military stocks will need to be established. This paper is intended to provide useful background information for establishing a conceptual approach to a five-year technical program plan for research and development of nuclear arms reductions verification and transparency technologies and procedures.« less

Standardization of blood smears prepared in transparent acetate: an alternative method for the microscopic diagnosis of malaria.

PubMed

Mello, Marcia B C; Luz, Francisco C; Leal-Santos, Fabio A; Alves, Eduardo R; Gasquez, Thamires M; Fontes, Cor J F

2014-06-17

Due to students' initial inexperience, slides are frequently broken and blood smears are damaged in microscopy training, leading to the need for their constant replacement. To minimize this problem a method of preparing blood smears on transparent acetate sheets was developed with the goal of implementing appropriate and more readily available teaching resources for the microscopic diagnosis of malaria. Acetate sheets derived from polyester were used to standardize the preparation and staining of thin and thick blood smears on transparent acetate sheets. Thick and thin blood smears were also prepared using the conventional method on glass slides. The staining was conducted using Giemsa staining for the thick and thin smears. Microscopic examination (1,000x) of the thin and thick blood smears prepared on transparent acetate produced high-quality images for both the parasites and the blood cells. The smears showed up on a clear background and with minimal dye precipitation. It was possible to clearly identify the main morphological characteristics of Plasmodium, neutrophils and platelets. After 12 months of storage, there was no change in image quality or evidence of fungal colonization. Preparation of thin and thick blood smears in transparent acetate for the microscopic diagnosis of malaria does not compromise the morphological and staining characteristics of the parasites or blood cells. It is reasonable to predict the applicability of transparent acetate in relevant situations such as the training of qualified professionals for the microscopic diagnosis of malaria and the preparation of positive specimens for competency assessment (quality control) of professionals and services involved in the diagnosis of malaria.

Public reporting needed to improve the health of Tennesseans.

PubMed

Bailey, James E; Gibson, Deborah

2005-11-01

Tennessee providers are recognizing an urgent need for a new and improved model of healthcare, characterized by transparent accountability to consumers. Meaningful health system improvements will require broad public disclosure of healthcare performance data at the hospital, clinic and community levels using nationally recognized standards. All Tennessee communities need a routine community health report card, to help their citizens to work together toward their most important health goals.

Consoer et al PFOS dataset

EPA Pesticide Factsheets

This ScienceHub entry was developed for the published paper: Consoer et al., 2016, Toxicokinetics of perfluorooctane sulfonate in rainow trout (Oncorhynchus mykiss), Environ. Toxicol. Chem. 35:717-727. Individual rainbow trout were exposed to PFOS by bolus injection (elimination studies) or by adding PFOS to incoming water (branchial uptake studies). The trout were fitted with indwelling catheters and urinary cannulae to permit periodic collection of blood and urine. Additional sampling was conducted to evaluate PFOS uptake from and elimination to respired water. Data obtained from each fish was evaluated using a clearance-volume pharmacokinetic model. Modeled kinetic parameters were then averaged to develop summary statistics which were used as a basis for interpreting modeled results and making comparisons to a previous study of rainbow trout exposed to perfluorooctanoate (PFOA; Consoer et al., 2014, Aquat. Toxicol. 156:65-73). The results of this study, combined with that of the previous PFOA study, suggest that PFOA is a substrate for renal transporters in fish while glomerular filtration alone may be sufficient to explain the observed renal elimination of PFOS. These findings demonstrate that models developed to predict the bioaccumulation of perfluoroalkyl acids by fish must account for differences in renal clearance of individual compounds.This dataset is associated with the following publication:Consoer, D., A. Hoffman , P. Fitzsimmons , P. Kosia

A study of selenium nanoparticles as charge storage element for flexible semi-transparent memory devices

NASA Astrophysics Data System (ADS)

Alotaibi, Sattam; Nama Manjunatha, Krishna; Paul, Shashi

2017-12-01

Flexible Semi-Transparent electronic memory would be useful in coming years for integrated flexible transparent electronic devices. However, attaining such flexibility and semi-transparency leads to the boundaries in material composition. Thus, impeding processing speed and device performance. In this work, we present the use of inorganic stable selenium nanoparticles (Se-NPs) as a storage element and hydrogenated amorphous carbon (a-C:H) as an insulating layer in two terminal non-volatile physically flexible and semi-transparent capacitive memory devices (2T-NMDs). Furthermore, a-C:H films can be deposited at very low temperature (<40° C) on a variety of substrates (including many kinds of plastic substrates) by an industrial technique called Plasma Enhanced Chemical Vapour Deposition (PECVD) which is available in many existing fabrication labs. Self-assembled Se-NPs has several unique features including deposition at room temperature by simple vacuum thermal evaporation process without the need for further optimisation. This facilitates the fabrication of memory on a flexible substrate. Moreover, the memory behaviour of the Se-NPs was found to be more distinct than those of the semiconductor and metal nanostructures due to higher work function compared to the commonly used semiconductor and metal species. The memory behaviour was observed from the hysteresis of current-voltage (I-V) measurements while the two distinguishable electrical conductivity states (;0; and "1") were studied by current-time (I-t) measurements.

[Data transparency regarding medical devices - the position of the medical device industry].

PubMed

Soskuty, Gabriela

2011-01-01

The medical device industry, strongly dominated by medium-sized firms, has significant growth potential and a high number of job opportunities with 170,000 employees in more than 11,000 companies. Approximately one third of the business volume is achieved with innovative products that are less than three years old. The safety, quality and efficiency of the products is tested and approved by CE certification. Due to the heterogeneous field of devices, however, evidence requirements must be differentiated according to the type of device in question. Transparency is as important as the type of evidence, and industry is well aware of the significance of transparency for credibility in the market. Industry believes that all the stakeholders affected must collaborate to define the evidence requirements and decide which data are necessary to assess the benefits of a technology. Before a consistent level of transparency can be achieved, however, it is crucial to jointly develop a framework of requirements including invasiveness, risk potential, patient-relevant endpoints and intended use of the technology, as well as the data source. Transparency is a process that can only be achieved if all stakeholders cooperate successfully. Also, it is important to keep in mind that the development of study designs and reliable evidence needs time. In the interest of all patients it is essential to maintain an innovation-friendly climate in Germany. Copyright © 2011. Published by Elsevier GmbH.

Concealed, Unobtrusive Ear-Centered EEG Acquisition: cEEGrids for Transparent EEG

PubMed Central

Bleichner, Martin G.; Debener, Stefan

2017-01-01

Electroencephalography (EEG) is an important clinical tool and frequently used to study the brain-behavior relationship in humans noninvasively. Traditionally, EEG signals are recorded by positioning electrodes on the scalp and keeping them in place with glue, rubber bands, or elastic caps. This setup provides good coverage of the head, but is impractical for EEG acquisition in natural daily-life situations. Here, we propose the transparent EEG concept. Transparent EEG aims for motion tolerant, highly portable, unobtrusive, and near invisible data acquisition with minimum disturbance of a user's daily activities. In recent years several ear-centered EEG solutions that are compatible with the transparent EEG concept have been presented. We discuss work showing that miniature electrodes placed in and around the human ear are a feasible solution, as they are sensitive enough to pick up electrical signals stemming from various brain and non-brain sources. We also describe the cEEGrid flex-printed sensor array, which enables unobtrusive multi-channel EEG acquisition from around the ear. In a number of validation studies we found that the cEEGrid enables the recording of meaningful continuous EEG, event-related potentials and neural oscillations. Here, we explain the rationale underlying the cEEGrid ear-EEG solution, present possible use cases and identify open issues that need to be solved on the way toward transparent EEG. PMID:28439233

Emergence of highly transparent photovoltaics for distributed applications

NASA Astrophysics Data System (ADS)

Traverse, Christopher J.; Pandey, Richa; Barr, Miles C.; Lunt, Richard R.

2017-11-01

Solar energy offers a viable solution to our growing energy need. While adoption of conventional photovoltaics on rooftops and in solar farms has grown rapidly in the last decade, there is still plenty of opportunity for expansion. See-through solar technologies with partial light transmission developed over the past 30 years have initiated methods of integration not possible with conventional modules. The large-scale deployment necessary to offset global energy consumption could be further accelerated by developing fully invisible solar cells that selectively absorb ultraviolet and near-infrared light, allowing many of the surfaces of our built environment to be turned into solar harvesting arrays without impacting the function or aesthetics. Here, we review recent advances in photovoltaics with varying degrees of visible light transparency. We discuss the figures of merit necessary to characterize transparent photovoltaics, and outline the requirements to enable their widespread adoption in buildings, windows, electronic device displays, and automobiles.

Self-activated ultrahigh chemosensitivity of oxide thin film nanostructures for transparent sensors

PubMed Central

Moon, Hi Gyu; Shim, Young-Soek; Kim, Do Hong; Jeong, Hu Young; Jeong, Myoungho; Jung, Joo Young; Han, Seung Min; Kim, Jong Kyu; Kim, Jin-Sang; Park, Hyung-Ho; Lee, Jong-Heun; Tuller, Harry L.; Yoon, Seok-Jin; Jang, Ho Won

2012-01-01

One of the top design priorities for semiconductor chemical sensors is developing simple, low-cost, sensitive and reliable sensors to be built in handheld devices. However, the need to implement heating elements in sensor devices, and the resulting high power consumption, remains a major obstacle for the realization of miniaturized and integrated chemoresistive thin film sensors based on metal oxides. Here we demonstrate structurally simple but extremely efficient all oxide chemoresistive sensors with ~90% transmittance at visible wavelengths. Highly effective self-activation in anisotropically self-assembled nanocolumnar tungsten oxide thin films on glass substrate with indium-tin oxide electrodes enables ultrahigh response to nitrogen dioxide and volatile organic compounds with detection limits down to parts per trillion levels and power consumption less than 0.2 microwatts. Beyond the sensing performance, high transparency at visible wavelengths creates opportunities for their use in transparent electronic circuitry and optoelectronic devices with avenues for further functional convergence. PMID:22905319

[Tools to enhance the quality and transparency of health research reports: reporting guidelines].

PubMed

Galvão, Taís Freire; Silva, Marcus Tolentino; Garcia, Leila Posenato

2016-01-01

Scientific writing is the cornestone for publishing the results of research. Reporting guidelines are important tools for all those involved in the process of research production and report writing. These guidelines detail what is expected to be found in each section of a report for a given study design. The EQUATOR Network (Enhancing the QUAlity and Transparency Of health Research) is an international initiative that seeks to improve the reliability and the value of health research literature by promoting transparent and accurate reporting and wider use of robust reporting guidelines. The use of reporting guidelines has contributed to improved reports as well as increased quality of research methods. Reporting guidelines need to be publicized in order to increase knowledge about these essential tools among health researchers. Encouraging their use by journals is key to enhancing the quality of scientific publications.

Transparency and Accountability: "Implementing a Postsecondary Institution Rating System That Empowers Students While Avoiding Unintended Consequences"

ERIC Educational Resources Information Center

Harmon, Tim; Cielinski, Anna

2014-01-01

In an economy that increasingly demands postsecondary credentials to access high-paying jobs with the potential for career advancement, students need comprehensive and reliable information to make better college and career choices. This need has prompted a vigorous national dialogue about the best way to provide information on the performance of…

Substance-Treatment Professionals' Perceived Barriers to Incorporating Mindfulness Into Treatment.

PubMed

Edwards, Emily Rachel; Cohen, Mia Gintoft; Wupperman, Peggilee

2016-12-05

Despite scientific favor, psychological interventions supported by research are often underutilized by practitioners due to perceived obstacles in implementation. Increased transparency between researchers and practitioners throughout treatment development and dissemination is therefore necessary. The rising popularity of mindfulness-based approaches in the treatment of substance-use disorders suggests such transparency is necessary in further developing, disseminating, and implementing such approaches within the context of substance treatment. The present study aimed to increase transparency by surveying substance-treatment professionals regarding their perceptions of barriers to adopting mindfulness in the treatment of substance use. Substance-treatment professionals throughout the United States (N = 103) completed an online survey about their perceptions of potential barriers to implementing mindfulness into substance treatment. Overall, professionals were moderately familiar with mindfulness as a treatment for substance use. Approximately one-third reported providing mindfulness in substance treatment; however, only 7% reported providing mindfulness using a research-supported treatment manual. Across professionals of various backgrounds, the need for further training was rated as the greatest barrier to implementation. Results suggest that practitioners are generally familiar with and willing to implement mindfulness in the treatment of substance use. Future research and implementation efforts should focus on methods of increasing training availability, accessibility, and relevance to address the needs and expectations of substance-treatment professionals.

Optimising the use of observational electronic health record data: Current issues, evolving opportunities, strategies and scope for collaboration.

PubMed

Liaw, Siaw-Teng; Powell-Davies, Gawaine; Pearce, Christopher; Britt, Helena; McGlynn, Lisa; Harris, Mark F

2016-03-01

With increasing computerisation in general practice, national primary care networks are mooted as sources of data for health services and population health research and planning. Existing data collection programs - MedicinesInsight, Improvement Foundation, Bettering the Evaluation and Care of Health (BEACH) - vary in purpose, governance, methodologies and tools. General practitioners (GPs) have significant roles as collectors, managers and users of electronic health record (EHR) data. They need to understand the challenges to their clinical and managerial roles and responsibilities. The aim of this article is to examine the primary and secondary use of EHR data, identify challenges, discuss solutions and explore directions. Representatives from existing programs, Medicare Locals, Local Health Districts and research networks held workshops on the scope, challenges and approaches to the quality and use of EHR data. Challenges included data quality, interoperability, fragmented governance, proprietary software, transparency, sustainability, competing ethical and privacy perspectives, and cognitive load on patients and clinicians. Proposed solutions included effective change management; transparent governance and management of intellectual property, data quality, security, ethical access, and privacy; common data models, metadata and tools; and patient/community engagement. Collaboration and common approaches to tools, platforms and governance are needed. Processes and structures must be transparent and acceptable to GPs.

Poly(dodecyl methacrylate) as solvent of paraffins for phase change materials and thermally reversible light scattering films.

PubMed

Puig, Julieta; Williams, Roberto J J; Hoppe, Cristina E

2013-09-25

Paraffins are typical organic phase change materials (PCM) used for latent heat storage. For practical applications they must be encapsulated to prevent leakage or agglomeration during fusion. In this study it is shown that eicosane (C20H42 = C20) in the melted state could be dissolved in the hydrophobic domains of poly(dodecyl methacrylate) (PDMA) up to concentrations of 30 wt %, avoiding the need of encapsulation. For a 30 wt % solution, the heat of phase change was close to 69 J/g, a reasonable value for its use as a PCM. The fully converted solution remained transparent at 80 °C with no evidence of phase separation but became opaque by cooling as a consequence of paraffin crystallization. Heating above the melting temperature regenerated a transparent material. A high contrast ratio and abrupt transition between opaque and transparent states was observed for the 30 wt % blends, with a transparent state at 35 °C and an opaque state at 23 °C. This behavior was completely reproducible during consecutive heating/cooling cycles, indicating the possible use of this material as a thermally reversible light scattering (TRLS) film.

TCBMs over the military use of outer space

NASA Astrophysics Data System (ADS)

Takaya-Umehara, Yuri

2010-11-01

Although no legal instrument resulted from long negotiations in the UN and Conference on Disarmament (CD), the application of confidence-building measures (CBMs) that was once considered in the 1990's attracted attention again to restrict military use of outer space. Since 2005, the concept of "Transparency and confidence-building measures (TCBMs)" entered into the lexicon of space law to explore the possibility of reinforcing security in outer space activities. While CBMs have been developed and applied to treaty-based verification mechanisms, the introduction of TCBMs in space law needs further examination to fit in the context of space security. Therefore, by evaluating the function of CBMs applied to the existing law on disarmament and arms control, the author examines the application of TCBMs to space law and calls for the need to establish non-treaty-based monitoring mechanisms for transparency and confidence-building in outer space activities.

Unraveling the physics of vertical organic field effect transistors through nanoscale engineering of a self-assembled transparent electrode.

PubMed

Ben-Sasson, Ariel J; Tessler, Nir

2012-09-12

While organic transistors' performances are continually pushed to achieve lower power consumption, higher working frequencies, and higher current densities, a new type of organic transistors characterized by a vertical architecture offers a radically different design approach to outperform its traditional counterparts. Naturally, the distinct vertical architecture gives way to different governing physical ground rules and structural key features such as the need for an embedded transparent electrode. In this paper, we make use of a zero-frequency electric field-transparent patterned electrode produced through block-copolymer self-assembly based lithography to control the performances of the vertical organic field effect transistor (VOFET) and to study its governing physical mechanisms. Unlike other VOFET structures, this design, involving well-defined electrode architecture, is fully tractable, allowing for detailed modeling, analysis, and optimization. We provide for the first time a complete account of the physics underpinning the VOFET operation, considering two complementary mechanisms: the virtual contact formation (Schottky barrier lowering) and the induced potential barrier (solid-state triode-like shielding). We demonstrate how each mechanism, separately, accounts for the link between controllable nanoscale structural modifications in the patterned electrode and the VOFET performances. For example, the ON/OFF current ratio increases by up to 2 orders of magnitude when the perforations aspect ratio (height/width) decreases from ∼0.2 to ∼0.1. The patterned electrode is demonstrated to be not only penetrable to zero-frequency electric fields but also transparent in the visible spectrum, featuring uniformity, spike-free structure, material diversity, amenability with flexible surfaces, low sheet resistance (20-2000 Ω sq(-1)) and high transparency (60-90%). The excellent layer transparency of the patterned electrode and the VOFET's exceptional electrical performances make them both promising elements for future transparent and/or efficient organic electronics.

Point-of-need simultaneous electrochemical detection of lead and cadmium using low-cost stencil-printed transparency electrodes.

PubMed

Martín-Yerga, Daniel; Álvarez-Martos, Isabel; Blanco-López, M Carmen; Henry, Charles S; Fernández-Abedul, M Teresa

2017-08-15

In this work, we report a simple and yet efficient stencil-printed electrochemical platform that can be integrated into the caps of sample containers and thus, allows in-field quantification of Cd(II) and Pb(II) in river water samples. The device exploits the low-cost features of carbon (as electrode material) and paper/polyester transparency sheets (as substrate). Electrochemical analysis of the working electrodes prepared on different substrates (polyester transparency sheets, chromatographic, tracing and office papers) with hexaammineruthenium(III) showed that their electroactive area and electron transfer kinetics are highly affected by the porosity of the material. Electrodes prepared on transparency substrates showed the best electroanalytical performance for the simultaneous determination of Cd(II) and Pb(II) by square-wave anodic stripping voltammetry. Interestingly, the temperature and time at which the carbon ink was cured had significant effect on the electrochemical response, especially the capacitive current. The amount of Cd and Pb on the electrode surface can be increased about 20% by in situ electrodeposition of bismuth. The electrochemical platform showed a linear range comprised between 1 and 200 μg/L for both metals, sensitivity of analysis of 0.22 and 0.087 μA/ppb and limits of detection of 0.2 and 0.3 μg/L for Cd(II) and Pb(II), respectively. The analysis of river water samples was done directly in the container where the sample was collected, which simplifies the procedure and approaches field analysis. The developed point-of-need detection system allowed simultaneous determination of Cd(II) and Pb(II) in those samples using the standard addition method with precise and accurate results. Copyright © 2017 Elsevier B.V. All rights reserved.

Reviewing the evidence to inform the population of cost-effectiveness models within health technology assessments.

PubMed

Kaltenthaler, Eva; Tappenden, Paul; Paisley, Suzy

2013-01-01

Health technology assessments (HTAs) typically require the development of a cost-effectiveness model, which necessitates the identification, selection, and use of other types of information beyond clinical effectiveness evidence to populate the model parameters. The reviewing activity associated with model development should be transparent and reproducible but can result in a tension between being both timely and systematic. Little procedural guidance exists in this area. The purpose of this article was to provide guidance, informed by focus groups, on what might constitute a systematic and transparent approach to reviewing information to populate model parameters. A focus group series was held with HTA experts in the United Kingdom including systematic reviewers, information specialists, and health economic modelers to explore these issues. Framework analysis was used to analyze the qualitative data elicited during focus groups. Suggestions included the use of rapid reviewing methods and the need to consider the trade-off between relevance and quality. The need for transparency in the reporting of review methods was emphasized. It was suggested that additional attention should be given to the reporting of parameters deemed to be more important to the model or where the preferred decision regarding the choice of evidence is equivocal. These recommendations form part of a Technical Support Document produced for the National Institute for Health and Clinical Excellence Decision Support Unit in the United Kingdom. It is intended that these recommendations will help to ensure a more systematic, transparent, and reproducible process for the review of model parameters within HTA. Copyright © 2013 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Skills Analysis. Workshop Package on Skills Analysis, Skills Audit and Training Needs Analysis.

ERIC Educational Resources Information Center

Hayton, Geoff; And Others

This four-part package is designed to assist Australian workshop leaders running 2-day workshops on skills analysis, skills audit, and training needs analysis. Part A contains information on how to use the package and a list of workshop aims. Parts B, C, and D consist, respectively, of the workshop leader's guide; overhead transparency sheets and…

Useful global-change scenarios: current issues and challenges

NASA Astrophysics Data System (ADS)

Parson, E. A.

2008-10-01

Scenarios are increasingly used to inform global-change debates, but their connection to decisions has been weak and indirect. This reflects the greater number and variety of potential users and scenario needs, relative to other decision domains where scenario use is more established. Global-change scenario needs include common elements, e.g., model-generated projections of emissions and climate change, needed by many users but in different ways and with different assumptions. For these common elements, the limited ability to engage diverse global-change users in scenario development requires extreme transparency in communicating underlying reasoning and assumptions, including probability judgments. Other scenario needs are specific to users, requiring a decentralized network of scenario and assessment organizations to disseminate and interpret common elements and add elements requiring local context or expertise. Such an approach will make global-change scenarios more useful for decisions, but not less controversial. Despite predictable attacks, scenario-based reasoning is necessary for responsible global-change decisions because decision-relevant uncertainties cannot be specified scientifically. The purpose of scenarios is not to avoid speculation, but to make the required speculation more disciplined, more anchored in relevant scientific knowledge when available, and more transparent.

A Cost-Effective Transparency-Based Digital Imaging for Efficient and Accurate Wound Area Measurement

PubMed Central

Li, Pei-Nan; Li, Hong; Wu, Mo-Li; Wang, Shou-Yu; Kong, Qing-You; Zhang, Zhen; Sun, Yuan; Liu, Jia; Lv, De-Cheng

2012-01-01

Wound measurement is an objective and direct way to trace the course of wound healing and to evaluate therapeutic efficacy. Nevertheless, the accuracy and efficiency of the current measurement methods need to be improved. Taking the advantages of reliability of transparency tracing and the accuracy of computer-aided digital imaging, a transparency-based digital imaging approach is established, by which data from 340 wound tracing were collected from 6 experimental groups (8 rats/group) at 8 experimental time points (Day 1, 3, 5, 7, 10, 12, 14 and 16) and orderly archived onto a transparency model sheet. This sheet was scanned and its image was saved in JPG form. Since a set of standard area units from 1 mm2 to 1 cm2 was integrated into the sheet, the tracing areas in JPG image were measured directly, using the “Magnetic lasso tool” in Adobe Photoshop program. The pixel values/PVs of individual outlined regions were obtained and recorded in an average speed of 27 second/region. All PV data were saved in an excel form and their corresponding areas were calculated simultaneously by the formula of Y (PV of the outlined region)/X (PV of standard area unit) × Z (area of standard unit). It took a researcher less than 3 hours to finish area calculation of 340 regions. In contrast, over 3 hours were expended by three skillful researchers to accomplish the above work with traditional transparency-based method. Moreover, unlike the results obtained traditionally, little variation was found among the data calculated by different persons and the standard area units in different sizes and shapes. Given its accurate, reproductive and efficient properties, this transparency-based digital imaging approach would be of significant values in basic wound healing research and clinical practice. PMID:22666449

TerraFERMA: The Transparent Finite Element Rapid Model Assembler for multiphysics problems in Earth sciences

NASA Astrophysics Data System (ADS)

Wilson, Cian R.; Spiegelman, Marc; van Keken, Peter E.

2017-02-01

We introduce and describe a new software infrastructure TerraFERMA, the Transparent Finite Element Rapid Model Assembler, for the rapid and reproducible description and solution of coupled multiphysics problems. The design of TerraFERMA is driven by two computational needs in Earth sciences. The first is the need for increased flexibility in both problem description and solution strategies for coupled problems where small changes in model assumptions can lead to dramatic changes in physical behavior. The second is the need for software and models that are more transparent so that results can be verified, reproduced, and modified in a manner such that the best ideas in computation and Earth science can be more easily shared and reused. TerraFERMA leverages three advanced open-source libraries for scientific computation that provide high-level problem description (FEniCS), composable solvers for coupled multiphysics problems (PETSc), and an options handling system (SPuD) that allows the hierarchical management of all model options. TerraFERMA integrates these libraries into an interface that organizes the scientific and computational choices required in a model into a single options file from which a custom compiled application is generated and run. Because all models share the same infrastructure, models become more reusable and reproducible, while still permitting the individual researcher considerable latitude in model construction. TerraFERMA solves partial differential equations using the finite element method. It is particularly well suited for nonlinear problems with complex coupling between components. TerraFERMA is open-source and available at http://terraferma.github.io, which includes links to documentation and example input files.

A comparison of partial order technique with three methods of multi-criteria analysis for ranking of chemical substances.

PubMed

Lerche, Dorte; Brüggemann, Rainer; Sørensen, Peter; Carlsen, Lars; Nielsen, Ole John

2002-01-01

An alternative to the often cumbersome and time-consuming risk assessments of chemical substances could be more reliable and advanced priority setting methods. An elaboration of the simple scoring methods is provided by Hasse Diagram Technique (HDT) and/or Multi-Criteria Analysis (MCA). The present study provides an in depth evaluation of HDT relative to three MCA techniques. The new and main methodological step in the comparison is the use of probability concepts based on mathematical tools such as linear extensions of partially ordered sets and Monte Carlo simulations. A data set consisting of 12 High Production Volume Chemicals (HPVCs) is used for illustration. It is a paradigm in this investigation to claim that the need of external input (often subjective weightings of criteria) should be minimized and that the transparency should be maximized in any multicriteria prioritisation. The study illustrates that the Hasse diagram technique (HDT) needs least external input, is most transparent and is least subjective. However, HDT has some weaknesses if there are criteria which exclude each other. Then weighting is needed. Multi-Criteria Analysis (i.e. Utility Function approach, PROMETHEE and concordance analysis) can deal with such mutual exclusions because their formalisms to quantify preferences allow participation e.g. weighting of criteria. Consequently MCA include more subjectivity and loose transparency. The recommendation which arises from this study is that the first step in decision making is to run HDT and as the second step possibly is to run one of the MCA algorithms.

Do your nurses speak finance?

PubMed

Studer, Quint

2010-06-01

To ensure that financial and clinical leaders have the same perspective on the direction their organization is taking, hospitals should: Build a platform of common understanding. Connect to the"why". Be transparent. Give clinical leaders the tools they need. Create true collaboration.

Adverse Outcome Pathways: From Definition to Application

EPA Science Inventory

A challenge for both human health and ecological toxicologists is the transparent application of mechanistic (e.g., molecular, biochemical, histological) data to risk assessments. The adverse outcome pathway (AOP) is a conceptual framework designed to meet this need. Specifical...

Financial transparency and physicians: the physician leader's guide to sharing numbers.

PubMed

Paskert, James P

2014-01-01

Review critical factors such as length of stay, case mix, financial statements, ratios and days cash on hand that physicians need to understand to adequately manage hospital patients and engage in the success of the organization.

Ensuring transparency and minimization of methodologic bias in preclinical pain research: PPRECISE considerations.

PubMed

Andrews, Nick A; Latrémolière, Alban; Basbaum, Allan I; Mogil, Jeffrey S; Porreca, Frank; Rice, Andrew S C; Woolf, Clifford J; Currie, Gillian L; Dworkin, Robert H; Eisenach, James C; Evans, Scott; Gewandter, Jennifer S; Gover, Tony D; Handwerker, Hermann; Huang, Wenlong; Iyengar, Smriti; Jensen, Mark P; Kennedy, Jeffrey D; Lee, Nancy; Levine, Jon; Lidster, Katie; Machin, Ian; McDermott, Michael P; McMahon, Stephen B; Price, Theodore J; Ross, Sarah E; Scherrer, Grégory; Seal, Rebecca P; Sena, Emily S; Silva, Elizabeth; Stone, Laura; Svensson, Camilla I; Turk, Dennis C; Whiteside, Garth

2016-04-01

There is growing concern about lack of scientific rigor and transparent reporting across many preclinical fields of biological research. Poor experimental design and lack of transparent reporting can result in conscious or unconscious experimental bias, producing results that are not replicable. The Analgesic, Anesthetic, and Addiction Clinical Trial Translations, Innovations, Opportunities, and Networks (ACTTION) public-private partnership with the U.S. Food and Drug Administration sponsored a consensus meeting of the Preclinical Pain Research Consortium for Investigating Safety and Efficacy (PPRECISE) Working Group. International participants from universities, funding agencies, government agencies, industry, and a patient advocacy organization attended. Reduction of publication bias, increasing the ability of others to faithfully repeat experimental methods, and increased transparency of data reporting were specifically discussed. Parameters deemed essential to increase confidence in the published literature were clear, specific reporting of an a priori hypothesis and definition of primary outcome measure. Power calculations and whether measurement of minimal meaningful effect size to determine these should be a core component of the preclinical research effort provoked considerable discussion, with many but not all agreeing. Greater transparency of reporting should be driven by scientists, journal editors, reviewers, and grant funders. The conduct of high-quality science that is fully reported should not preclude novelty and innovation in preclinical pain research, and indeed, any efforts that curtail such innovation would be misguided. We believe that to achieve the goal of finding effective new treatments for patients with pain, the pain field needs to deal with these challenging issues.

Transparent model of temporal bone and vestibulocochlear organ made by 3D printing.

PubMed

Suzuki, Ryoji; Taniguchi, Naoto; Uchida, Fujio; Ishizawa, Akimitsu; Kanatsu, Yoshinori; Zhou, Ming; Funakoshi, Kodai; Akashi, Hideo; Abe, Hiroshi

2018-01-01

The vestibulocochlear organ is composed of tiny complex structures embedded in the petrous part of the temporal bone. Landmarks on the temporal bone surface provide the only orientation guide for dissection, but these need to be removed during the course of dissection, making it difficult to grasp the underlying three-dimensional structures, especially for beginners during gross anatomy classes. We report herein an attempt to produce a transparent three-dimensional-printed model of the human ear. En bloc samples of the temporal bone from donated cadavers were subjected to computed tomography (CT) scanning, and on the basis of the data, the surface temporal bone was reconstructed with transparent resin and the vestibulocochlear organ with white resin to create a 1:1.5 scale model. The carotid canal was stuffed with red cotton, and the sigmoid sinus and internal jugular vein were filled with blue clay. In the inner ear, the internal acoustic meatus, cochlea, and semicircular canals were well reconstructed in detail with white resin. The three-dimensional relationships of the semicircular canals, spiral turns of the cochlea, and internal acoustic meatus were well recognizable from every direction through the transparent surface resin. The anterior semicircular canal was obvious immediately beneath the arcuate eminence, and the topographical relationships of the vestibulocochlear organ and adjacent great vessels were easily discernible. We consider that this transparent temporal bone model will be a very useful aid for better understanding of the gross anatomy of the vestibulocochlear organ.

Rapid process for producing transparent, monolithic porous glass

DOEpatents

Coronado, Paul R [Livermore, CA

2006-02-14

A process for making transparent porous glass monoliths from gels. The glass is produced much faster and in much larger sizes than present technology for making porous glass. The process reduces the cost of making large porous glass monoliths because: 1) the process does not require solvent exchange nor additives to the gel to increase the drying rates, 2) only moderate temperatures and pressures are used so relatively inexpensive equipment is needed, an 3) net-shape glass monoliths are possible using this process. The process depends on the use of temperature to control the partial pressure of the gel solvent in a closed vessel, resulting in controlled shrinking during drying.

THE BALTIC SEA REGION - IN NEED OF A MORE TOTAL DEFENSE

DTIC Science & Technology

2017-04-05

quick, reliable, transparent information, and education in source reliability. Furthermore, a strengthened Economic Defense is needed, where especially...Military forces once again were used to change borders in Europe.1 Economic sanctions and other responses by the West followed, against a revanchist...historical, geopolitical, military, and economic . There is a substantial risk that Russia, if not deterred, will continue its strategy of cross-domain

Understanding the Science behind EPA’s Pesticide Decisions

EPA Pesticide Factsheets

Science is key to EPA’s decision-making. EPA scientists review these data to determine whether to register a pesticide product or use and any need for specific restrictions. EPA maintains a transparent, public process in assessing potential human health ri

Providing Transparent Information to Empower Students' Decision Making and Develop Institutional Capacity

ERIC Educational Resources Information Center

Rodwell, Gary

2014-01-01

This chapter describes the University of Hawaii's work to develop an online navigational tool that helps students develop and execute their educational plans, and assists colleges with ensuring that they have the capacity to meet students' needs.

Light-controlling, flexible and transparent ethanol gas sensor based on ZnO nanoparticles for wearable devices.

PubMed

Zheng, Z Q; Yao, J D; Wang, B; Yang, G W

2015-06-16

In recent years, owing to the significant applications of health monitoring, wearable electronic devices such as smart watches, smart glass and wearable cameras have been growing rapidly. Gas sensor is an important part of wearable electronic devices for detecting pollutant, toxic, and combustible gases. However, in order to apply to wearable electronic devices, the gas sensor needs flexible, transparent, and working at room temperature, which are not available for traditional gas sensors. Here, we for the first time fabricate a light-controlling, flexible, transparent, and working at room-temperature ethanol gas sensor by using commercial ZnO nanoparticles. The fabricated sensor not only exhibits fast and excellent photoresponse, but also shows high sensing response to ethanol under UV irradiation. Meanwhile, its transmittance exceeds 62% in the visible spectral range, and the sensing performance keeps the same even bent it at a curvature angle of 90(o). Additionally, using commercial ZnO nanoparticles provides a facile and low-cost route to fabricate wearable electronic devices.

Comparison of different measurement methods for transmittance haze

NASA Astrophysics Data System (ADS)

Yu, Hsueh-Ling; Hsaio, Chin-Chai

2009-08-01

Transmittance haze is increasingly important to the LCD and solar cell industry. Most commercial haze measurement instruments are designed according to the method recommended in the documentary standards like ASTM D 1003 (ASTM 2003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics), JIS K 7361 (JIS 1997 Plastics—Determination of the Total Luminous Transmittance of Transparent Materials—Part 1: Single Beam Instrument) and ISO 14782 (ISO 1997 Plastics—Determination of Haze of Transparent Materials). To improve the measurement accuracy of the current standards, a new apparatus was designed by the Center for Measurement Standards (Yu et al 2006 Meas. Sci. Technol. 17 N29-36). Besides the methods mentioned above, a double-beam method is used in the design of some instruments. There are discrepancies between the various methods. But no matter which method is used, a white standard is always needed. This paper compares the measurement results from different methods, presents the effect of the white standard, and analyses the measurement uncertainty.

Comparing 2 Adhesive Methods on Skin Integrity in the High-Risk Neonate.

PubMed

Boswell, Nicole; Waker, Cheryl L

2016-12-01

Nurses have a primary role in promoting neonatal skin integrity and skin care management of the critically ill neonate. Adhesive products are essential to secure needed medical devices but can be a significant factor contributing to skin breakdown. Current literature does not offer a definitive answer regarding which products most safely and effectively work to secure needed devices in the high-risk neonatal population. To determine which adhesive method is best practice to safely and effectively secure lines/tubes in the high-risk neonate population. The only main effect that was significant was age group with mean skin scores. Subjects in the younger group (24-28 weeks) had higher skin scores than in the older group (28-34 weeks), validating that younger gestations are at higher risk of breakdown with the use of adhesives. The findings did not clearly identify which product was superior to secure tubes and lines, or was the least injurious to skin of the high-risk neonate. Neither a transparent dressing only or transparent dressing over hydrocolloid method clearly demonstrated an advantage in the high-risk, preterm neonate. Anecdotal comments suggested staff preferred the transparent dressing over hydrocolloid method as providing better adhesive while protecting skin integrity. The findings validated that younger gestations are at higher risk of breakdown with the use of adhesives and therefore require close vigilance to maintain skin integrity.

Views of health journalists, industry employees and news consumers about disclosure and regulation of industry-journalist relationships: an empirical ethical study.

PubMed

Lipworth, Wendy; Kerridge, Ian; Morrell, Bronwen; Forsyth, Rowena; Jordens, Christopher F C

2015-03-01

Bioethicists and policymakers are increasingly concerned about the effects on health journalism of relationships between journalists and private corporations. The concern is that relationships between journalists and manufacturers of medicines, medical devices, complementary medicines and food can and do distort health reporting. This is a problem because health news is known to have a major impact on the public's health-related expectations and behaviour. Commentators have proposed two related approaches to protecting the public from potential harms arising from industry-journalist interactions: greater transparency and external regulation. To date, few empirical studies have examined stakeholders' views of industry-journalist relationships and how these should be managed. We conducted interviews with 13 journalists and 12 industry employees, and 2 focus groups with consumers. Our findings, which are synthesised here, provide empirical support for the need for greater transparency and regulation of industry-journalist relationships. Our findings also highlight several likely barriers to instituting such measures, which will need to be overcome if transparency and regulation are to be accepted by stakeholders and have their intended effect on the quality of journalism and the actions of news consumers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Transparency and the Food and Drug Administration--a quantitative study.

PubMed

Lofstedt, Ragnar; Bouder, Frederic; Chakraborty, Sweta

2013-01-01

In Europe and North America, there is increasing political pressure being put on health regulatory agencies to become more transparent. To date, however, there has been little academic evaluation--let alone analysis--of these transparency initiatives from a risk communication perspective. This review examines whether the U.S. Food and Drug Administration's Adverse Event Reporting System quarterly signal postings, put in place after the passage of the Food and Drug Administration Amendments Act 2007, will assist patients and doctors in their decision-making processes, on the basis of results of a quantitative Internet survey of 433 physicians and 1,000 American adults. The results indicate that there is significant disagreement between physicians and the public about when medical safety issues should be communicated in the first place, with physicians opposed to early signal postings while the public in general is in favor. In addition the findings show that if the public were to find their drugs listed on the Adverse Event Reporting System signals web postings, more than a quarter would stop taking their medicine. Going forward, the Food and Drug Administration needs to work to a greater degree with social scientists in developing scientific-based communication strategies, rather than developing transparency initiatives on the basis of stakeholder consultations.

The value of using top-down and bottom-up approaches for building trust and transparency in biobanking.

PubMed

Meslin, Eric M

2010-01-01

With the domestic and international proliferation of biobanks and their associated connections to health information databases, scholarly attention has been turning from the ethical issues arising from the construction of biobanks to the ethical issues that emerge in their operation and management. Calls for greater transparency in governance structures, coupled with stern reminders of the value of maintaining public trust, are seen as critical components in the success of these resources. Two different approaches have been adopted for addressing these types of ethical issues: the first is a 'top-down' approach which focuses on developing policy, procedures, regulations and guidelines to aid decision-makers. The second is a 'bottom-up' approach, which begins with those who are most affected by the issues and attempts to inductively develop consensus recommendations and policy. While both approaches have merit, I argue that more work needs to be done on 'bottom-up' strategies if trust and transparency are to be more than mere slogans. Using 2 case examples from Indiana, the paper summarizes data from a set of surveys we recently conducted that address issues arising from biobanks that provide some insight into issues associated with trust and transparency. Copyright 2010 S. Karger AG, Basel.

3D Reconstruction in the Presence of Glass and Mirrors by Acoustic and Visual Fusion.

PubMed

Zhang, Yu; Ye, Mao; Manocha, Dinesh; Yang, Ruigang

2017-07-06

We present a practical and inexpensive method to reconstruct 3D scenes that include transparent and mirror objects. Our work is motivated by the need for automatically generating 3D models of interior scenes, which commonly include glass. These large structures are often invisible to cameras. Existing 3D reconstruction methods for transparent objects are usually not applicable in such a room-sized reconstruction setting. Our simple hardware setup augments a regular depth camera with a single ultrasonic sensor, which is able to measure the distance to any object, including transparent surfaces. The key technical challenge is the sparse sampling rate from the acoustic sensor, which only takes one point measurement per frame. To address this challenge, we take advantage of the fact that the large scale glass structures in indoor environments are usually either piece-wise planar or simple parametric surfaces. Based on these assumptions, we have developed a novel sensor fusion algorithm that first segments the (hybrid) depth map into different categories such as opaque/transparent/infinity (e.g., too far to measure) and then updates the depth map based on the segmentation outcome. We validated our algorithms with a number of challenging cases, including multiple panes of glass, mirrors, and even a curved glass cabinet.

The failure of AHERF: 5 important lessons.

PubMed

Goldstein, Lisa

2008-08-01

Important lessons from AHERF's downfall: Strong governance and oversight of management are needed to ensure accountability; Disciplined growth strategies need to be supported by rigorous financial planning and feasibility analysis; Physician integration is critical to grow market share, but needs to be methodical and measured; Robust information systems are necessary to manage costs, maximize revenue, and provide differentiation in quality and clinical outcomes; Disclosure of the financial performance of all of a health system's operations creates greater transparency and builds credibility.

78 FR 57133 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-17

... survey design provides for transparently skipping respondents only to the sections that are relevant to.... SUPPLEMENTARY INFORMATION: Title, Associated Form, and OMB Number: Industry Partnership Survey, OMB Control Number 0702-0122. Needs and Uses: The information collected from this survey will be used to...

What's needed next: a culture of candor.

PubMed

O'Toole, James; Bennis, Warren

2009-06-01

If there's one thing that the past decade's business disasters should teach us, it's that we need to stop evaluating corporate leaders simply on the basis of how much wealth they create for investors. A healthier yardstick would be this: the extent to which leaders create firms that are economically, ethically, and socially sustainable. The first step toward accomplishing that task is to create a culture of candor. Companies can't innovate, respond to stakeholder needs, or run efficiently unless the people inside them have access to timely, relevant information, point out professors O'Toole, of the University of Denver's Daniels College of Business, and Bennis, of the University of Southern California. Increasing transparency can be an uphill battle against human nature, however. The obstacles are numerous: macho executives who don't listen to their subordinates or punish them for bringing bad news; leaders who believe that information is power and hoard it; groupthink among team members who don't know how to disagree; boards that fail to question charismatic CEOs. Nevertheless, leaders can take steps to nurture transparency. By being open and candid, admitting their errors, encouraging employees to speak truth to power, and rewarding contrarians, executives can model the kind of conduct they want to see. Training employees to handle unpleasant conversations with grace also will break down barriers to honest communication. To avoid being blinded by biases, leaders can diversify their sources of information--an obvious measure that's rarely taken. Perhaps the biggest lever for cultural change is the executive selection process--choosing leaders for their transparent behavior, not just their ability to compete. And a few companies have even gone so far as to share all relevant information with every employee.

P-type transparent conducting oxides.

PubMed

Zhang, Kelvin H L; Xi, Kai; Blamire, Mark G; Egdell, Russell G

2016-09-28

Transparent conducting oxides constitute a unique class of materials combining properties of electrical conductivity and optical transparency in a single material. They are needed for a wide range of applications including solar cells, flat panel displays, touch screens, light emitting diodes and transparent electronics. Most of the commercially available TCOs are n-type, such as Sn doped In2O3, Al doped ZnO, and F doped SnO2. However, the development of efficient p-type TCOs remains an outstanding challenge. This challenge is thought to be due to the localized nature of the O 2p derived valence band which leads to difficulty in introducing shallow acceptors and large hole effective masses. In 1997 Hosono and co-workers (1997 Nature 389 939) proposed the concept of 'chemical modulation of the valence band' to mitigate this problem using hybridization of O 2p orbitals with close-shell Cu 3d (10) orbitals. This work has sparked tremendous interest in designing p-TCO materials together with deep understanding the underlying materials physics. In this article, we will provide a comprehensive review on traditional and recently emergent p-TCOs, including Cu(+)-based delafossites, layered oxychalcogenides, nd (6) spinel oxides, Cr(3+)-based oxides (3d (3)) and post-transition metal oxides with lone pair state (ns (2)). We will focus our discussions on the basic materials physics of these materials in terms of electronic structures, doping and defect properties for p-type conductivity and optical properties. Device applications based on p-TCOs for transparent p-n junctions will also be briefly discussed.

Transparent anodic TiO2 nanotube arrays on plastic substrates for disposable biosensors and flexible electronics.

PubMed

Farsinezhad, Samira; Mohammadpour, Arash; Dalrymple, Ashley N; Geisinger, Jared; Kar, Piyush; Brett, Michael J; Shankar, Karthik

2013-04-01

Exploitation of anodically formed self-organized TiO2 nanotube arrays in mass-manufactured, disposable biosensors, rollable electrochromic displays and flexible large-area solar cells would greatly benefit from integration with transparent and flexible polymeric substrates. Such integration requires the vacuum deposition of a thin film of titanium on the desired substrate, which is then anodized in suitable media to generate TiO2 nanotube arrays. However the challenges associated with control of Ti film morphology, nanotube array synthesis conditions, and film adhesion and transparency, have necessitated the use of substrate heating during deposition to temperatures of at least 300 degrees C and as high as 500 degrees C to generate highly ordered open-pore nanotube arrays, thus preventing the use of polymeric substrates. We report on a film growth technique that exploits atomic peening to achieve high quality transparent TiO2 nanotube arrays with lengths up to 5.1 microm at room temperature on polyimide substrates without the need for substrate heating or substrate biasing or a Kauffman ion source. The superior optical quality and uniformity of the nanotube arrays was evidenced by the high specular reflectivity and the smooth pattern of periodic interferometric fringes in the transmission spectra of the nanotube arrays, from which the wavelength-dependent effective refractive index was extracted for the air-TiO2 composite medium. A fluorescent immunoassay biosensor constructed using 5.1 microm-long transparent titania nanotube arrays (TTNAs) grown on Kapton substrates detected human cardiac troponin I at a concentration of 0.1 microg ml(-1).

Ensuring transparency and minimization of methodologic bias in preclinical pain research: PPRECISE considerations

PubMed Central

Andrews, Nick A.; Latrémolière, Alban; Basbaum, Allan I.; Mogil, Jeffrey S.; Porreca, Frank; Rice, Andrew S.C.; Woolf, Clifford J.; Currie, Gillian L.; Dworkin, Robert H.; Eisenach, James C.; Evans, Scott; Gewandter, Jennifer S.; Gover, Tony D.; Handwerker, Hermann; Huang, Wenlong; Iyengar, Smriti; Jensen, Mark P.; Kennedy, Jeffrey D.; Lee, Nancy; Levine, Jon; Lidster, Katie; Machin, Ian; McDermott, Michael P.; McMahon, Stephen B.; Price, Theodore J.; Ross, Sarah E.; Scherrer, Grégory; Seal, Rebecca P.; Sena, Emily S.; Silva, Elizabeth; Stone, Laura; Svensson, Camilla I.; Turk, Dennis C.; Whiteside, Garth

2015-01-01

Abstract There is growing concern about lack of scientific rigor and transparent reporting across many preclinical fields of biological research. Poor experimental design and lack of transparent reporting can result in conscious or unconscious experimental bias, producing results that are not replicable. The Analgesic, Anesthetic, and Addiction Clinical Trial Translations, Innovations, Opportunities, and Networks (ACTTION) public–private partnership with the U.S. Food and Drug Administration sponsored a consensus meeting of the Preclinical Pain Research Consortium for Investigating Safety and Efficacy (PPRECISE) Working Group. International participants from universities, funding agencies, government agencies, industry, and a patient advocacy organization attended. Reduction of publication bias, increasing the ability of others to faithfully repeat experimental methods, and increased transparency of data reporting were specifically discussed. Parameters deemed essential to increase confidence in the published literature were clear, specific reporting of an a priori hypothesis and definition of primary outcome measure. Power calculations and whether measurement of minimal meaningful effect size to determine these should be a core component of the preclinical research effort provoked considerable discussion, with many but not all agreeing. Greater transparency of reporting should be driven by scientists, journal editors, reviewers, and grant funders. The conduct of high-quality science that is fully reported should not preclude novelty and innovation in preclinical pain research, and indeed, any efforts that curtail such innovation would be misguided. We believe that to achieve the goal of finding effective new treatments for patients with pain, the pain field needs to deal with these challenging issues. PMID:26683237

Solar Cell Panel and the Method for Manufacturing the Same

NASA Technical Reports Server (NTRS)

Sarver, Charles F. (Inventor); Richards, Benjamin C. (Inventor); Naidenkova, Maria (Inventor)

2016-01-01

According to an aspect of an embodiment of the present disclosure, there is provided a solar cell panel and a method for manufacturing the same. The solar cell panel comprises: a solar cell for generating electric power from sunlight; a coverglass for covering the solar cell; transparent shims, which are disposed between the solar cell and the coverglass at the points where the distance between the solar cell and the coverglass needs to be controlled, and form a space between the solar cell and the coverglass; and adhesive layer, which fills the space between the solar cell and the coverglass and has the thickness the same as that of the transparent shims.

Australia: An Instructional Unit for Elementary Grades.

ERIC Educational Resources Information Center

Duea, Joan; And Others

Designed to provide elementary teachers with materials for the study of Australia, this unit contains 19 lessons that include objectives, materials, procedures, suggested extension activities, and answer keys where needed. Following the 19 lessons are blackline masters for teacher transparencies, student worksheets, and extension activities. A…

A Primer on Disseminating Applied Quantitative Research

ERIC Educational Resources Information Center

Bell, Bethany A.; DiStefano, Christine; Morgan, Grant B.

2010-01-01

Transparency and replication are essential features of scientific inquiry, yet scientific communications of applied quantitative research are often lacking in much-needed procedural information. In an effort to promote researchers dissemination of their quantitative studies in a cohesive, detailed, and informative manner, the authors delineate…

Software Maintenance.

ERIC Educational Resources Information Center

Cannon, Glenn; Jobe, Holly

Proper cleaning and storage of audiovisual aids is outlined in this brief guide. Materials and equipment needed for first line maintenance are listed, as well as maintenance procedures for records, audio and video tape, film, filmstrips, slides, realia, models, prints, graphics, maps, and overhead transparencies. A 15-item quiz on software…

Q methodology in health economics.

PubMed

Baker, Rachel; Thompson, Carl; Mannion, Russell

2006-01-01

The recognition that health economists need to understand the meaning of data if they are to adequately understand research findings which challenge conventional economic theory has led to the growth of qualitative modes of enquiry in health economics. The use of qualitative methods of exploration and description alongside quantitative techniques gives rise to a number of epistemological, ontological and methodological challenges: difficulties in accounting for subjectivity in choices, the need for rigour and transparency in method, and problems of disciplinary acceptability to health economists. Q methodology is introduced as a means of overcoming some of these challenges. We argue that Q offers a means of exploring subjectivity, beliefs and values while retaining the transparency, rigour and mathematical underpinnings of quantitative techniques. The various stages of Q methodological enquiry are outlined alongside potential areas of application in health economics, before discussing the strengths and limitations of the approach. We conclude that Q methodology is a useful addition to economists' methodological armoury and one that merits further consideration and evaluation in the study of health services.

Lightweight Provenance Service for High-Performance Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Dong; Chen, Yong; Carns, Philip

Provenance describes detailed information about the history of a piece of data, containing the relationships among elements such as users, processes, jobs, and workflows that contribute to the existence of data. Provenance is key to supporting many data management functionalities that are increasingly important in operations such as identifying data sources, parameters, or assumptions behind a given result; auditing data usage; or understanding details about how inputs are transformed into outputs. Despite its importance, however, provenance support is largely underdeveloped in highly parallel architectures and systems. One major challenge is the demanding requirements of providing provenance service in situ. Themore » need to remain lightweight and to be always on often conflicts with the need to be transparent and offer an accurate catalog of details regarding the applications and systems. To tackle this challenge, we introduce a lightweight provenance service, called LPS, for high-performance computing (HPC) systems. LPS leverages a kernel instrument mechanism to achieve transparency and introduces representative execution and flexible granularity to capture comprehensive provenance with controllable overhead. Extensive evaluations and use cases have confirmed its efficiency and usability. We believe that LPS can be integrated into current and future HPC systems to support a variety of data management needs.« less

The application of 3D-printed transparent facemask for facial scar management and its biomechanical rationale.

PubMed

Wei, Yating; Wang, Yan; Zhang, Ming; Yan, Gang; Wu, Shixue; Liu, Wenjun; Ji, Gang; Li-Tsang, Cecilia W P

2018-03-01

Deep facial burns leave conspicuous scar to the patients and affect their quality of life. Transparent facemask has been adopted for the prevention and treatment of facial hypertrophic scars for decades. Recently, with the advancement of 3D printing, the transparent facemask could facilitate the fitting of the facial contour. However, the effectiveness of the device and its biomechanical characteristics on pressure management of hypertrophic scar would need more objective evaluation. A biomechanical model of the transparent 3D-printed facemask was established through finite element analysis. Ten patients with extensive deep facial burns within 6 months were recruited for clinical study using 3D-printed facemask designed according to biomechanical model, and the interface pressure was measured on each patient. The patients in the treatment group (n=5) was provided with the 3D-printed transparent face mask soon after initial scar assessment, while the delayed treatment group (n=5) began the treatment one month after the initial scar assessment. The scar assessment was performed one month post intervention for both groups. The biomechanical modeling showed that the 3D, computer-generated facemask resulted in unbalanced pressure if design modifications were not incorporated to address these issues. The interface pressure between the facemask and patient's face was optimized through individualized design adjustments and the addition of silicone lining. After optimization of pressure through additional lining, the mean thickness and hardness of the scars of all 10 patients were decreased significantly after 1-month of intervention. In the delayed treatment group, the mean thickness of the scars was increased within the month without intervention, but it was also decreased after intervention. Facemask design and the silicone lining are important to ensure adequate compression pressure of 3D-printed transparent facemask. The intervention using the 3D-printed facemask appeared to show its efficacy to control the thickness and hardness of the facial hypertrophic scars. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Electroacoustic verification of frequency modulation systems in cochlear implant users.

PubMed

Fidêncio, Vanessa Luisa Destro; Jacob, Regina Tangerino de Souza; Tanamati, Liége Franzini; Bucuvic, Érika Cristina; Moret, Adriane Lima Mortari

2017-12-26

The frequency modulation system is a device that helps to improve speech perception in noise and is considered the most beneficial approach to improve speech recognition in noise in cochlear implant users. According to guidelines, there is a need to perform a check before fitting the frequency modulation system. Although there are recommendations regarding the behavioral tests that should be performed at the fitting of the frequency modulation system to cochlear implant users, there are no published recommendations regarding the electroacoustic test that should be performed. Perform and determine the validity of an electroacoustic verification test for frequency modulation systems coupled to different cochlear implant speech processors. The sample included 40 participants between 5 and 18 year's users of four different models of speech processors. For the electroacoustic evaluation, we used the Audioscan Verifit device with the HA-1 coupler and the listening check devices corresponding to each speech processor model. In cases where the transparency was not achieved, a modification was made in the frequency modulation gain adjustment and we used the Brazilian version of the "Phrases in Noise Test" to evaluate the speech perception in competitive noise. It was observed that there was transparency between the frequency modulation system and the cochlear implant in 85% of the participants evaluated. After adjusting the gain of the frequency modulation receiver in the other participants, the devices showed transparency when the electroacoustic verification test was repeated. It was also observed that patients demonstrated better performance in speech perception in noise after a new adjustment, that is, in these cases; the electroacoustic transparency caused behavioral transparency. The electroacoustic evaluation protocol suggested was effective in evaluation of transparency between the frequency modulation system and the cochlear implant. Performing the adjustment of the speech processor and the frequency modulation system gain are essential when fitting this device. Copyright © 2017 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

Ethics and equity in research priority-setting: stakeholder engagement and the needs of disadvantaged groups.

PubMed

Bhaumik, Soumyadeep; Rana, Sangeeta; Karimkhani, Chante; Welch, Vivian; Armstrong, Rebecca; Pottie, Kevin; Dellavalle, Robert; Dhakal, Purushottam; Oliver, Sandy; Francis, Damian K; Nasser, Mona; Crowe, Sally; Aksut, Baran; Amico, Roberto D

2015-01-01

A transparent and evidence-based priority-setting process promotes the optimal use of resources to improve health outcomes. Decision-makers and funders have begun to increasingly engage representatives of patients and healthcare consumers to ensure that research becomes more relevant. However, disadvantaged groups and their needs may not be integrated into the priority-setting process since they do not have a "political voice" or are unable to organise into interest groups. Equitable priority-setting methods need to balance patient needs, values, experiences with population-level issues and issues related to the health system.

Suspension and Debarment: DOD Has Active Referral Processes, but Action Needed to Promote Transparency

DTIC Science & Technology

2012-09-01

relating to submission of offers, embezzlement, theft, forgery, bribery , falsification or destruction of records, federal tax delinquency, and many...debarment period was necessary to protect the government from doing business with this company for its unethical and dishonest practices. Source: GAO

Why Model Recreation Use?

Treesearch

David N. Cole; Kerri Cahill; Marilyn Hof

2005-01-01

As the demographics of public land recreational visitors change, planners and managers of public lands face the challenge of protecting resources while providing high quality visitor experiences. Because our political environment demands ever more reliance on scientific data and transparent decisionmaking, planners and managers need better tools to help them understand...

Introduction: Occam’s Razor (SOT - Fit for Purpose workshop introduction)

EPA Science Inventory

Mathematical models provide important, reproducible, and transparent information for risk-based decision making. However, these models must be constructed to fit the needs of the problem to be solved. A “fit for purpose” model is an abstraction of a complicated problem that allow...

Integrated Data & Analysis in Support of Informed and Transparent Decision Making

NASA Astrophysics Data System (ADS)

Guivetchi, K.

2012-12-01

The California Water Plan includes a framework for improving water reliability, environmental stewardship, and economic stability through two initiatives - integrated regional water management to make better use of local water sources by integrating multiple aspects of managing water and related resources; and maintaining and improving statewide water management systems. The Water Plan promotes ways to develop a common approach for data standards and for understanding, evaluating, and improving regional and statewide water management systems, and for common ways to evaluate and select from alternative management strategies and projects. The California Water Plan acknowledges that planning for the future is uncertain and that change will continue to occur. It is not possible to know for certain how population growth, land use decisions, water demand patterns, environmental conditions, the climate, and many other factors that affect water use and supply may change by 2050. To anticipate change, our approach to water management and planning for the future needs to consider and quantify uncertainty, risk, and sustainability. There is a critical need for information sharing and information management to support over-arching and long-term water policy decisions that cross-cut multiple programs across many organizations and provide a common and transparent understanding of water problems and solutions. Achieving integrated water management with multiple benefits requires a transparent description of dynamic linkages between water supply, flood management, water quality, land use, environmental water, and many other factors. Water Plan Update 2013 will include an analytical roadmap for improving data, analytical tools, and decision-support to advance integrated water management at statewide and regional scales. It will include recommendations for linking collaborative processes with technical enhancements, providing effective analytical tools, and improving and sharing data and information. Specifically, this includes achieving better integration and consistency with other planning activities; obtaining consensus on quantitative deliverables; building a common conceptual understanding of the water management system; developing common schematics of the water management system; establishing modeling protocols and standards; and improving transparency and exchange of Water Plan information.

Mature use of casemix - are we there yet?

PubMed

Balnave, Lai-Mun; Reid, Beth A

2007-04-01

In this paper we consider the progress made in using casemix in Australia. We argue that while the casemix infrastructure has been highly developed and the casemix-based funding systems of some states are mature, there is still more development needed to use the data for clinical questions such as quality improvement activities. Further research is needed to establish what is needed to describe the impact of casemix on clinicians and hospitals in a context of increasing accountability and transparency and where questions of efficiency cannot be ignored.

76 FR 1180 - FDA Transparency Initiative: Improving Transparency to Regulated Industry

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

...] FDA Transparency Initiative: Improving Transparency to Regulated Industry AGENCY: Food and Drug... the Transparency Initiative, the Food and Drug Administration (FDA) is announcing the availability of a report entitled ``FDA Transparency Initiative: Improving Transparency to Regulated Industry.'' The...

Laser Processed Silver Nanowire Network Transparent Electrodes for Novel Electronic Devices

NASA Astrophysics Data System (ADS)

Spechler, Joshua Allen

Silver nanowire network transparent conducting layers are poised to make headway into a space previously dominated by transparent conducting oxides due to the promise of a flexible, scaleable, lab-atmosphere processable alternative. However, there are many challenges standing in the way between research scale use and consumer technology scale adaptation of this technology. In this thesis we will explore many, and overcome a few of these challenges. We will address the poor conductivity at the narrow nanowire-nanowire junction points in the network by developing a laser based process to weld nanowires together on a microscopic scale. We address the need for a comparative metric for transparent conductors in general, by taking a device level rather than a component level view of these layers. We also address the mechanical, physical, and thermal limitations to the silver nanowire networks by making composites from materials including a colorless polyimide and titania sol-gel. Additionally, we verify our findings by integrating these processes into devices. Studying a hybrid organic/inorganic heterojunction photovoltaic device we show the benefits of a laser processed electrode. Green phosphorescent organic light emitting diodes fabricated on a solution phase processed silver nanowire based electrode show favorable device metrics compared to a conductive oxide electrode based control. The work in this thesis is intended to push the adoption of silver nanowire networks to further allow new device architectures, and thereby new device applications.

Provenance of Earth Science Datasets - How Deep Should One Go?

NASA Astrophysics Data System (ADS)

Ramapriyan, H.; Manipon, G. J. M.; Aulenbach, S.; Duggan, B.; Goldstein, J.; Hua, H.; Tan, D.; Tilmes, C.; Wilson, B. D.; Wolfe, R.; Zednik, S.

2015-12-01

For credibility of scientific research, transparency and reproducibility are essential. This fundamental tenet has been emphasized for centuries, and has been receiving increased attention in recent years. The Office of Management and Budget (2002) addressed reproducibility and other aspects of quality and utility of information from federal agencies. Specific guidelines from NASA (2002) are derived from the above. According to these guidelines, "NASA requires a higher standard of quality for information that is considered influential. Influential scientific, financial, or statistical information is defined as NASA information that, when disseminated, will have or does have clear and substantial impact on important public policies or important private sector decisions." For information to be compliant, "the information must be transparent and reproducible to the greatest possible extent." We present how the principles of transparency and reproducibility have been applied to NASA data supporting the Third National Climate Assessment (NCA3). The depth of trace needed of provenance of data used to derive conclusions in NCA3 depends on how the data were used (e.g., qualitatively or quantitatively). Given that the information is diligently maintained in the agency archives, it is possible to trace from a figure in the publication through the datasets, specific files, algorithm versions, instruments used for data collection, and satellites, as well as the individuals and organizations involved in each step. Such trace back permits transparency and reproducibility.

Focusing on energy and optoelectronic applications: a journey for graphene and graphene oxide at large scale.

PubMed

Wan, Xiangjian; Huang, Yi; Chen, Yongsheng

2012-04-17

Carbon is the only element that has stable allotropes in the 0th through the 3rd dimension, all of which have many outstanding properties. Graphene is the basic building block of other important carbon allotropes. Studies of graphene became much more active after the Geim group isolated "free" and "perfect" graphene sheets and demonstrated the unprecedented electronic properties of graphene in 2004. So far, no other individual material combines so many important properties, including high mobility, Hall effect, transparency, mechanical strength, and thermal conductivity. In this Account, we briefly review our studies of bulk scale graphene and graphene oxide (GO), including their synthesis and applications focused on energy and optoelectronics. Researchers use many methods to produce graphene materials: bottom-up and top-down methods and scalable methods such as chemical vapor deposition (CVD) and chemical exfoliation. Each fabrication method has both advantages and limitations. CVD could represent the most important production method for electronic applications. The chemical exfoliation method offers the advantages of easy scale up and easy solution processing but also produces graphene oxide (GO), which leads to defects and the introduction of heavy functional groups. However, most of these additional functional groups and defects can be removed by chemical reduction or thermal annealing. Because solution processing is required for many film and device applications, including transparent electrodes for touch screens, light-emitting devices (LED), field-effect transistors (FET), and photovoltaic devices (OPV), flexible electronics, and composite applications, the use of GO is important for the production of graphene. Because graphene has an intrinsic zero band gap, this issue needs to be tackled for its FET applications. The studies for transparent electrode related applications have made great progress, but researchers need to improve sheet resistance while maintaining reasonable transparency. Proposals for solving these issues include doping or controlling the sheet size and defects, and theory indicates that graphene can match the overall performance of indium tin oxide (ITO). We have significantly improved the specific capacitance in graphene supercapacitor devices, though our results do not yet approach theoretical values. For composite applications, the key issue is to prevent the restacking of graphene sheets, which we achieved by adding blocking molecules. The continued success of graphene studies will require further development in two areas: (1) the large scale and controlled synthesis of graphene, producing different structures and quantities that are needed for a variety of applications and (2) on table applications, such as transparent electrodes and energy storage devices. Overall, graphene has demonstrated performance that equals or surpasses that of other new carbon allotropes. These features, combined with its easier access and better processing ability, offer the potential basis for truly revolutionary applications and as a future fundamental technological material beyond the silicon age.

Shame in decision making under risk conditions: Understanding the effect of transparency.

PubMed

Bonavia, Tomas; Brox-Ponce, Josué

2018-01-01

The role played by the emotion of shame in the area of decision-making in situations of risk has hardly been studied. In this article, we show how the socio-moral emotions and the anticipated feeling of shame associated with different options can determine our decisions, even overriding the cognitive choice tendency proposed by the certainty effect. To do so, we carried out an experiment with university students as participants, dividing them into four experimental conditions. Our findings suggest that people avoid making unethical decisions, both when these decisions are made public to others and when they remain in the private sphere. This result seems to indicate that the main factor in not making unethical decisions is related to the need to avoid transgressing an internal moral standard of behavior, and that the role of transparency is less relevant than expected. However, we propose that, although the effect of transparency is limited in reducing unethical economic decisions, it should continue to be taken into account in theoretical models that address the reasons people behave unethically.

Shame in decision making under risk conditions: Understanding the effect of transparency

PubMed Central

2018-01-01

The role played by the emotion of shame in the area of decision-making in situations of risk has hardly been studied. In this article, we show how the socio-moral emotions and the anticipated feeling of shame associated with different options can determine our decisions, even overriding the cognitive choice tendency proposed by the certainty effect. To do so, we carried out an experiment with university students as participants, dividing them into four experimental conditions. Our findings suggest that people avoid making unethical decisions, both when these decisions are made public to others and when they remain in the private sphere. This result seems to indicate that the main factor in not making unethical decisions is related to the need to avoid transgressing an internal moral standard of behavior, and that the role of transparency is less relevant than expected. However, we propose that, although the effect of transparency is limited in reducing unethical economic decisions, it should continue to be taken into account in theoretical models that address the reasons people behave unethically. PMID:29444107

Quantifying The Food And Drug Administration's rulemaking delays highlights the need for transparency.

PubMed

Hwang, Thomas J; Avorn, Jerry; Carpenter, Daniel; Kesselheim, Aaron S

2014-02-01

The Food and Drug Administration (FDA) frequently uses its rulemaking process to establish or modify the way it regulates drugs, medical devices, and other medical products. The federal agency's rulemaking is controversial because of its perceived complexity, lack of transparency, and lengthy duration. To shed light on the FDA's rulemaking process, we examined the evolution of significant rules that the agency published during 2000-12 for drugs, devices, and other medical products. We found that the rules' median time to finalization was 7.3 years, with the pre-rule phase and postreview deliberation within the FDA accounting for the majority of that time. Rules that involved mandatory cost-benefit analyses were associated with an additional delay of approximately two years. We also found that longer review times were significantly associated with a reduction in the stringency of final rules, compared to the originally proposed versions. We recommend improving FDA's rulemaking by allocating additional resources to increase efficiency and by embarking on initiatives to promote transparency by the FDA and other parts of the executive branch.

The transparency trap.

PubMed

Bernstein, Ethan

2014-10-01

To promote accountability, productivity, and shared learning, many organizations create open work environments and gather reams of data on how individuals spend their time. A few years ago, HBS professor Ethan Bernstein set out to find empirical evidence that such approaches improve organizational performance. What he discovered is that this kind of transparency often has an unintended consequence: It can leave employees feeling vulnerable and exposed. When that happens, they conceal any conduct that deviates from the norm so that they won't have to explain it. Unrehearsed, experimental behaviors sometimes stop altogether. But Bernstein also discovered organizations that had established zones of privacy within open environments by setting four types of boundaries: around teams, between feedback and evaluation, between decision rights and improvement rights, and around periods of experimentation. Moreover, across several studies, the companies that had done all this were the ones that consistently got the most creative, efficient, and thoughtful work from their employees. Bernstein's conclusion? By balancing transparency and privacy, organizations can capture the benefits of both, and encourage just the right amount of "positive deviance" needed to increase innovation and productivity.

Soft Lithographic Procedure for Producing Plastic Microfluidic Devices with View-ports Transparent to Visible and Infrared Light.

PubMed

Suryana, Mona; Shanmugarajah, Jegan V; Maniam, Sivakumar M; Grenci, Gianluca

2017-08-17

Infrared (IR) spectro-microscopy of living biological samples is hampered by the absorption of water in the mid-IR range and by the lack of suitable microfluidic devices. Here, a protocol for the fabrication of plastic microfluidic devices is demonstrated, where soft lithographic techniques are used to embed transparent Calcium Fluoride (CaF2) view-ports in connection with observation chamber(s). The method is based on a replica casting approach, where a polydimethylsiloxane (PDMS) mold is produced through standard lithographic procedures and then used as the template to produce a plastic device. The plastic device features ultraviolet/visible/infrared (UV/Vis/IR) -transparent windows made of CaF2 to allow for direct observation with visible and IR light. The advantages of the proposed method include: a reduced need for accessing a clean room micro-fabrication facility, multiple view-ports, an easy and versatile connection to an external pumping system through the plastic body, flexibility of the design, e.g., open/closed channels configuration, and the possibility to add sophisticated features such as nanoporous membranes.

Modeling light scattering in the shadow region behind thin cylinders for diameter analysis

NASA Astrophysics Data System (ADS)

Blohm, Werner

2018-03-01

In this paper, the scattered light intensities resulting in the shadow region at an observation plane behind monochromatically illuminated circular cylinders are modeled by sinusoidal sequences having a squared dependence on spatial position in the observation plane. Whereas two sinusoidal components appear to be sufficient for modeling the light distribution behind intransparent cylinders, at least three sinusoidal components are necessary for transparent cylinders. Based on this model, a novel evaluation algorithm for a very fast retrieval of the diameter of thin cylindrical products like metallic wires and transparent fibers is presented. This algorithm was tested in a cylinder diameter range typical for these products (d ≈ 70 … 150 μm; n ≈ 1.5). Numerical examples are given to illustrate its application by using both synthetic and experimental scattering data. Diameter accuracies below 0.05 μm could be achieved for intransparent cylinders in the tested diameter range. However, scattering effects due to morphological-dependent resonances (MDRs) are problematical in the diameter analysis of transparent products. In order to incorporate these effects into the model, further investigations are needed.

Ionic Liquid Activation of Amorphous Metal-Oxide Semiconductors for Flexible Transparent Electronic Devices

DOE PAGES

Pudasaini, Pushpa Raj; Noh, Joo Hyon; Wong, Anthony T.; ...

2016-02-09

To begin this abstract, amorphous metal-oxide semiconductors offer the high carrier mobilities and excellent large-area uniformity required for high performance, transparent, flexible electronic devices; however, a critical bottleneck to their widespread implementation is the need to activate these materials at high temperatures which are not compatible with flexible polymer substrates. The highly controllable activation of amorphous indium gallium zinc oxide semiconductor channels using ionic liquid gating at room temperature is reported. Activation is controlled by electric field-induced oxygen migration across the ionic liquid-semiconductor interface. In addition to activation of unannealed devices, it is shown that threshold voltages of a transistormore » can be linearly tuned between the enhancement and depletion modes. Finally, the first ever example of transparent flexible thin film metal oxide transistor on a polyamide substrate created using this simple technique is demonstrated. Finally, this study demonstrates the potential of field-induced activation as a promising alternative to traditional postdeposition thermal annealing which opens the door to wide scale implementation into flexible electronic applications.« less

Minimum Information about a Spinal Cord Injury Experiment: A Proposed Reporting Standard for Spinal Cord Injury Experiments

PubMed Central

Ferguson, Adam R.; Popovich, Phillip G.; Xu, Xiao-Ming; Snow, Diane M.; Igarashi, Michihiro; Beattie, Christine E.; Bixby, John L.

2014-01-01

Abstract The lack of reproducibility in many areas of experimental science has a number of causes, including a lack of transparency and precision in the description of experimental approaches. This has far-reaching consequences, including wasted resources and slowing of progress. Additionally, the large number of laboratories around the world publishing articles on a given topic make it difficult, if not impossible, for individual researchers to read all of the relevant literature. Consequently, centralized databases are needed to facilitate the generation of new hypotheses for testing. One strategy to improve transparency in experimental description, and to allow the development of frameworks for computer-readable knowledge repositories, is the adoption of uniform reporting standards, such as common data elements (data elements used in multiple clinical studies) and minimum information standards. This article describes a minimum information standard for spinal cord injury (SCI) experiments, its major elements, and the approaches used to develop it. Transparent reporting standards for experiments using animal models of human SCI aim to reduce inherent bias and increase experimental value. PMID:24870067

Additive manufacturing of microfluidic glass chips

NASA Astrophysics Data System (ADS)

Kotz, F.; Helmer, D.; Rapp, B. E.

2018-02-01

Additive manufacturing has gained great interest in the microfluidic community due to the numerous channel designs which can be tested in the early phases of a lab-on-a-chip device development. High resolution additive manufacturing like microstereolithography is largely associated with polymers. Polymers are at a disadvantage compared to other materials due to their softness and low chemical resistance. Whenever high chemical and thermal resistance combined with high optical transparency is needed, glasses become the material of choice. However, glasses are difficult to structure at the microscale requiring hazardous chemicals for etching processes. In this work we present additive manufacturing and high resolution patterning of microfluidic chips in transparent fused silica glass using stereolithography and microlithography. We print an amorphous silica nanocomposite at room temperature using benchtop stereolithography printers and a custom built microlithography system based on a digital mirror device. Using microlithography we printed structures with tens of micron resolution. The printed part is then converted to a transparent fused silica glass using thermal debinding and sintering. Printing of a microfluidic chip can be done within 30 minutes. The heat treatment can be done within two days.

Room temperature ammonia vapor sensing properties of transparent single walled carbon nanotube thin film

NASA Astrophysics Data System (ADS)

Shobin, L. R.; Manivannan, S.

2014-10-01

Carbon nanotube (CNT) networks are identified as potential substitute and surpass the conventional indium doped tin oxide (ITO) in transparent conducting electrodes, thin-film transistors, solar cells, and chemical sensors. Among them, CNT based gas sensors gained more interest because of its need in environmental monitoring, industrial control, and detection of gases in warfare or for averting security threats. The unique properties of CNT networks such as high surface area, low density, high thermal conductivity and chemical sensitivity making them as a potential candidate for gas sensing applications. Commercial unsorted single walled carbon nanotubes (SWCNT) were purified by thermal oxidation and acid treatment processes and dispersed in organic solvent N-methyl pyrolidone using sonication process in the absence of polymer or surfactant. Optically transparent SWCNT networks are realized on glass substrate by coating the dispersed SWCNT with the help of dynamic spray coating process at 200ºC. The SWCNT random network was characterized by scanning electron microscopy and UV-vis-NIR spectroscopy. Gas sensing property of transparent film towards ammonia vapor is studied at room temperature by measuring the resistance change with respect to the concentration in the range 0-1000 ppm. The sensor response is increased logarithmically in the concentration range 0 to 1000 ppm with the detection limit 0.007 ppm. The random networks are able to detect ammonia vapor selectively because of the high electron donating nature of ammonia molecule to the SWCNT. The sensor is reversible and selective to ammonia vapor with response time 70 seconds and recovery time 423 seconds for 62.5 ppm with 90% optical transparency at 550 nm.

Transparency and public accessibility of clinical trial information in Croatia: how it affects patient participation in clinical trials.

PubMed

Šolić, Ivana; Stipčić, Ana; Pavličević, Ivančica; Marušić, Ana

2017-06-15

Despite increased visibility of clinical trials through international trial registries, patients often remain uninformed of their existence, especially if they do not have access to adequate information about clinical research, including the language of the information. The aim of this study was to describe the context for transparency of clinical trials in Croatia in relation to countries in Central and Eastern Europe, and to assess how informed Croatian patients are about clinical trials and their accessibility. We assessed the transparency of clinical trials from the data available in the public domain. We also conducted an anonymous survey on a convenience sample of 257 patients visiting two family medicine offices or an oncology department in south Croatia, and members of national patients' associations. Despite legal provisions for transparency of clinical trials in Croatia, they are still not sufficiently visible in the public domain. Among countries from Central and Eastern Europe, Croatia has the fewest number of registered trials in the EU Clinical Trials Registry. 66% of the patients in the survey were aware of the existence of clinical trials but only 15% were informed about possibilities of participating in a trial. Although 58% of the respondents were willing to try new treatments, only 6% actually participated in a clinical trial. Only 2% of the respondents were aware of publicly available trial registries. Our study demonstrates that there is low transparency of clinical trials in Croatia, and that Croatian patients are not fully aware of clinical trials and the possibilities of participating in them, despite reported availability of Internet resources and good communication with their physicians. There is a need for active policy measures to increase the awareness of and access to clinical trials to patients in Croatia, particularly in their own language.

Flexible, transparent electrodes using carbon nanotubes

PubMed Central

2012-01-01

We prepare thin single-walled carbon nanotube networks on a transparent and flexible substrate with different densities, using a very simple spray method. We measure the electric impedance at different frequencies Z(f) in the frequency range of 40 Hz to 20 GHz using two different methods: a two-probe method in the range up to 110 MHz and a coaxial (Corbino) method in the range of 10 MHz to 20 GHz. We measure the optical absorption and electrical conductivity in order to optimize the conditions for obtaining optimum performance films with both high electrical conductivity and transparency. We observe a square resistance of 1 to 8.5 kΩ for samples showing 65% to 85% optical transmittance, respectively. For some applications, we need flexibility and not transparency: for this purpose, we deposit a thick film of single-walled carbon nanotubes on a flexible silicone substrate by spray method from an aqueous suspension of carbon nanotubes in a surfactant (sodium dodecyl sulphate), thereby obtaining a flexible conducting electrode showing an electrical resistance as low as 200 Ω/sq. When stretching up to 10% and 20%, the electrical resistance increases slightly, recovering the initial value for small elongations up to 10%. We analyze the stretched and unstretched samples by Raman spectroscopy and observe that the breathing mode on the Raman spectra is highly sensitive to stretching. The high-energy Raman modes do not change, which indicates that no defects are introduced when stretching. Using this method, flexible conducting films that may be transparent are obtained just by employing a very simple spray method and can be deposited on any type or shape of surface. PMID:23074999

Time-resolved study of femtosecond laser induced micro-modifications inside transparent brittle materials

NASA Astrophysics Data System (ADS)

Hendricks, F.; Matylitsky, V. V.; Domke, M.; Huber, Heinz P.

2016-03-01

Laser processing of optically transparent or semi-transparent, brittle materials is finding wide use in various manufacturing sectors. For example, in consumer electronic devices such as smartphones or tablets, cover glass needs to be cut precisely in various shapes. The unique advantage of material processing with femtosecond lasers is efficient, fast and localized energy deposition in nearly all types of solid materials. When an ultra-short laser pulse is focused inside glass, only the localized region in the neighborhood of the focal volume absorbs laser energy by nonlinear optical absorption. Therefore, the processing volume is strongly defined, while the rest of the target stays unaffected. Thus ultra-short pulse lasers allow cutting of the chemically strengthened glasses such as Corning Gorilla glass without cracking. Non-ablative cutting of transparent, brittle materials, using the newly developed femtosecond process ClearShapeTM from Spectra-Physics, is based on producing a micron-sized material modification track with well-defined geometry inside. The key point for development of the process is to understand the induced modification by a single femtosecond laser shot. In this paper, pump-probe microscopy techniques have been applied to study the defect formation inside of transparent materials, namely soda-lime glass samples, on a time scale between one nanosecond to several tens of microseconds. The observed effects include acoustic wave propagation as well as mechanical stress formation in the bulk of the glass. Besides better understanding of underlying physical mechanisms, our experimental observations have enabled us to find optimal process parameters for the glass cutting application and lead to better quality and speed for the ClearShapeTM process.

Improving the transparency of a rehabilitation robot by exploiting the cyclic behaviour of walking.

PubMed

van Dijk, W; van der Kooij, H; Koopman, B; van Asseldonk, E H F; van der Kooij, H

2013-06-01

To promote active participation of neurological patients during robotic gait training, controllers, such as "assist as needed" or "cooperative control", are suggested. Apart from providing support, these controllers also require that the robot should be capable of resembling natural, unsupported, walking. This means that they should have a transparent mode, where the interaction forces between the human and the robot are minimal. Traditional feedback-control algorithms do not exploit the cyclic nature of walking to improve the transparency of the robot. The purpose of this study was to improve the transparent mode of robotic devices, by developing two controllers that use the rhythmic behavior of gait. Both controllers use adaptive frequency oscillators and kernel-based non-linear filters. Kernelbased non-linear filters can be used to estimate signals and their time derivatives, as a function of the gait phase. The first controller learns the motor angle, associated with a certain joint angle pattern, and acts as a feed-forward controller to improve the torque tracking (including the zero-torque mode). The second controller learns the state of the mechanical system and compensates for the dynamical effects (e.g. the acceleration of robot masses). Both controllers have been tested separately and in combination on a small subject population. Using the feedforward controller resulted in an improved torque tracking of at least 52 percent at the hip joint, and 61 percent at the knee joint. When both controllers were active simultaneously, the interaction power between the robot and the human leg was reduced by at least 40 percent at the thigh, and 43 percent at the shank. These results indicate that: if a robotic task is cyclic, the torque tracking and transparency can be improved by exploiting the predictions of adaptive frequency oscillator and kernel-based nonlinear filters.

Doctoral Oral Examinations and Contemporary Counselor Education: Are They Compatible?

ERIC Educational Resources Information Center

McAdams, Charles R., III.; Robertson, Derek L.; Foster, Victoria A.

2013-01-01

This descriptive study examined 160 former students' perceptions of one assessment tradition in counselor education: the doctoral oral examination. The findings suggest that oral examinations continue to have substantive value for students, but changes are needed to ensure their future objectivity, transparency, and regard for students'…

Seizing the Moment for Transformation: California's Local Control Funding Formula

ERIC Educational Resources Information Center

Miles, Karen Hawley; Feinberg, Randi

2014-01-01

In 2013 California adopted a new funding formula that includes a significant reinvestment in public education after years of budget cuts. The new law allocates funds differently, directing more resources to students with higher needs and providing more local control and greater transparency. This revolutionary change presents California districts…

Teaching Photography without a Darkroom.

ERIC Educational Resources Information Center

McDole, Thomas L.

Alternative curriculum strategies can be used to conduct an effective photography program without the expense usually associated with a darkroom. Three methods can be used to eliminate the need for a darkroom facility: outside vendors, an emulsion that can be user-processed without access to a darkroom (slide or transparency film), and emulsions…

Index of Refraction without Geometry

ERIC Educational Resources Information Center

Farkas, N.; Henriksen, P. N.; Ramsier, R. D.

2006-01-01

This article presents several activities that permit students to determine the index of refraction of transparent solids and liquids using simple equipment without the need for geometrical relationships, special lighting or optical instruments. Graphical analysis of the measured data is shown to be a useful method for determining the index of…

Recruitment Practices Change, but Issues Remain the Same

ERIC Educational Resources Information Center

Hugo, Esther

2012-01-01

What the author found most surprising about Richard Haines' survey on 1974 recruitment practices was that the major issues are still relevant. His main points about recruitment, college and counselor interaction, and the need for better information still resonate as the profession consistently calls for clarity and transparency in the college…

Measurement. Teacher's Guide. Small Engine Repair Series.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This teacher's guide is part of an instructional series on small engine repair that is intended for use with mentally retarded and learning disabled students in general mechanical repair programs. Notes to the instructor cover equipment needed, preparation before teaching, and use of evaluation charts, transparency masters, audiovisual(s), and…

Art Portraying Medicine

ERIC Educational Resources Information Center

Koski, Kaisu

2011-01-01

A number of art projects are currently tackling the medical domain. This activity stems from a perceived need to increase the transparency and democracy of the medical domain, and it often questions the power relations and the one-dimensionality in current medical practices. This article sheds light on how artists process medical themes,…

Transforming Institutions through Shared Governance

ERIC Educational Resources Information Center

Bornstein, Rita

2012-01-01

Shared governance is a basic tenet of higher education and is frequently referred to. For shared governance to be successful, board members, administrators, and faculty members must learn to have respect for and confidence in each other, acting inclusively, transparently, and responsibly. Boards need to be active and involved, participating in…

More Needed for Coherent System

ERIC Educational Resources Information Center

Field, John

2004-01-01

From a learner's standpoint, Scotland's education system often looks less like a neat set of pathways than a tangled jungle. Since devolution, Scottish policymakers and the education community have set out to create a coherent and transparent set of opportunities for adult learners, of a quality to match Scotland's oft-praised unified system of…

Broad-scale consequences of land management: Columbia basin example.

Treesearch

Richard W. Haynes; Thomas M. Quigley

2001-01-01

Integrating management actions to consistently achieve broad ecological and socioeconomic goals is a challenge largely unmet. The presumed or real conflict between these goals establishes a forum for debate. Broad measures are needed to describe tradeoffs, trends in conditions under varying management scenarios, and a transparent science underpinning. The Interior...

Finding Optimal Gains In Linear-Quadratic Control Problems

NASA Technical Reports Server (NTRS)

Milman, Mark H.; Scheid, Robert E., Jr.

1990-01-01

Analytical method based on Volterra factorization leads to new approximations for optimal control gains in finite-time linear-quadratic control problem of system having infinite number of dimensions. Circumvents need to analyze and solve Riccati equations and provides more transparent connection between dynamics of system and optimal gain.

Method of forming macro-structured high surface area transparent conductive oxide electrodes

DOEpatents

Forman, Arnold J.; Chen, Zhebo; Jaramillo, Thomas F.

2016-01-05

A method of forming a high surface area transparent conducting electrode is provided that includes depositing a transparent conducting thin film on a conductive substrate, where the transparent conducting thin film includes transparent conductive particles and a solution-based transparent conducting adhesive layer which serves to coat and bind together the transparent conducting particles, and heat treating the transparent conducting adhesion layer on the conductive substrate, where an increased surface area transparent conducting electrode is formed.

Secured Optical Communications Using Quantum Entangled Two-Photon Transparency Modulation

NASA Technical Reports Server (NTRS)

Nguyen, Quang-Viet (Inventor); Kojima, Jun (Inventor); Lekki, John (Inventor)

2015-01-01

A system and method is disclosed wherein optical signals are coded in a transmitter by tuning or modulating the interbeam delay time (which modulates the fourth-order coherence) between pairs of entangled photons. The photon pairs are either absorbed or not absorbed (transparent) by an atomic or molecular fluorescer in a receiver, depending on the inter-beam delay that is introduced in the entangled photon pairs. Upon the absorption, corresponding fluorescent optical emissions follow at a certain wavelength, which are then detected by a photon detector. The advantage of the disclosed system is that it eliminates a need of a coincidence counter to realize the entanglement-based secure optical communications because the absorber acts as a coincidence counter for entangled photon pairs.

Solubility Testing of Sucrose Esters of Fatty Acids in International Food Additive Specifications.

PubMed

Nagai, Yukino; Kawano, Satoko; Motoda, Kenichiro; Tomida, Masaaki; Tatebe, Chiye; Sato, Kyoko; Akiyama, Hiroshi

2017-03-01

We investigated the solubility of 10 samples of sucrose esters of fatty acids (SEFA) products that are commercially available worldwide as food additives (emulsifiers). Although one sample dissolved transparently in both water and ethanol, other samples produced white turbidity and/or precipitates and did not meet the solubility criterion established by the Joint Food and Agriculture Organization of the United Nations (FAO)/WHO Expert Committee on Food Additives (JECFA). When the sample solutions were heated, the solubility in both water and ethanol increased. All of the samples dissolved transparently in ethanol, and dispersed and became white without producing precipitates in water. The present study suggests that the current solubility criterion of the JECFA SEFA specifications needs to be revised.

Finding a good segmentation strategy for tree crown transparency estimation

Treesearch

Neil A. Clark; Sang-Mook Lee; Philip A. Araman

2003-01-01

Image segmentation is a general term for delineating image areas into informational categories. A wide variety of general techniques exist depending on application and the image data specifications. Specialized algorithms, utilizing components of several techniques, usually are needed to meet the rigors for a specific application. This paper considers automated color...

Troubleshooting. Teacher's Guide and Student Activity Sheets. Small Engine Repair Series.

ERIC Educational Resources Information Center

Hill, Pamela

This teacher's guide is part of an instructional series on small engine repair that is intended for use with mentally retarded and learning disabled students in general mechanical repair programs. Notes to the instructor cover equipment needed, preparation before teaching, and use of evaluation charts, transparency masters, audiovisual(s), and…

How Grading Reform Changed Our School

ERIC Educational Resources Information Center

Erickson, Jeffrey A.

2011-01-01

In the early 2000s, Minnetonka High School decided that it needed to develop a more consistent, transparent system of grading. The school focused its grading reform efforts on one principle: Grades should reflect only what a student knows and is able to do. As the school staff analyzed their policies and practices, they discovered many practices…

Smart Money? Philanthropic and Federal Funding for the Common Core

ERIC Educational Resources Information Center

Kornhaber, Mindy L.; Barkauskas, Nikolaus J.; Griffith, Kelly M.

2016-01-01

The Common Core State Standards Initiative seeks to prepare all students to graduate high school without remedial needs, to improve transparency across states' accountability systems, and to foster efficiencies in the development and distribution of educational resources. The reform was adopted in more than 40 states and has been described as…

Composite material dosimeters

DOEpatents

Miller, Steven D.

1996-01-01

The present invention is a composite material containing a mix of dosimeter material powder and a polymer powder wherein the polymer is transparent to the photon emission of the dosimeter material powder. By mixing dosimeter material powder with polymer powder, less dosimeter material is needed compared to a monolithic dosimeter material chip. Interrogation is done with excitation by visible light.

Opportunities and challenges in conducting systematic reviews to support development of nutrient reference values: vitamin A as an example

USDA-ARS?s Scientific Manuscript database

Nutrient reference values have significant public health and policy implications. Given the importance of defining reliable nutrient reference values, there is a need for an explicit, objective, and transparent process to set these values. The Tufts Medical Center Evidence-based Practice Center asse...

Empowering Parents and Communities through Quality Public Reporting: A Federal Policy Guide

ERIC Educational Resources Information Center

Data Quality Campaign, 2014

2014-01-01

Publicly reporting timely, actionable, and comprehensible education data is one of the most powerful ways states can promote transparency, strengthen accountability, and ensure that everyone with a stake in education--parents, educators, policymakers, and members of the public and press--has access to the information they need to make good…

Sunshine Laws in Higher Education. State Policy Brief

ERIC Educational Resources Information Center

Hearn, James C.

2017-01-01

Public higher education is a major recipient of state funding and resources. As such, public colleges and universities directly respond to state needs for higher education and are required to provide transparency in decision-making, which is codified in state open-meeting and record laws. These laws, often termed "sunshine laws," present…

78 FR 43797 - Protection of Stratospheric Ozone: The 2013 Critical Use Exemption From the Phaseout of Methyl...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-22

... Ozone Protection regulations, the science of ozone layer depletion, and related topics. SUPPLEMENTARY... should be based in sound science, and be transparent, fair and objective. The nomination process should... sound science and meet the critical needs of the applicants. EPA also strives to make the process...

Empowering Parents and Communities through Quality Public Reporting: A Brief for State Policymakers

ERIC Educational Resources Information Center

Data Quality Campaign, 2014

2014-01-01

Publicly reporting timely, actionable, and comprehensible data is one of the most powerful ways states can promote transparency, strengthen accountability, and ensure that everyone with a stake in education--parents, educators, policymakers, researchers, and members of the public and press-- has access to the information they need to make good…

Trickling Filters. Instructor's Guide. Biological Treatment Process Control.

ERIC Educational Resources Information Center

Richwine, Reynold D.

This instructor's guide contains materials needed for teaching a two-lesson unit on trickling filters. These materials include: (1) an overview of the two lessons; (2) lesson plans; (3) lecture outline (keyed to a set of slides accompanying the unit); (4) overhead transparency masters; (5) student worksheet (with answers); and (6) two copies of a…

Quality Assurance in Australian Higher Education: Historical and Future Development

ERIC Educational Resources Information Center

Shah, Mahsood; Nair, Sid; Wilson, Mark

2011-01-01

Higher education policies related to quality assurance are implemented in many countries. The purposes of such policies are to ensure the provision for high-quality education, university accountability and transparency in the use of public funding and meeting the needs of the diverse stakeholders. The current Australian Higher Education Quality…

Interdisciplinary Co-operation (Part II of "Language Learning: Individual Needs, Interdisciplinary Co-operation, Bi- and Multilingualism").

ERIC Educational Resources Information Center

1978

The following papers on interdisciplinary cooperation in second language instruction are included: (1) "Language Teaching: Possibilities for Interdisciplinary Co-operation," by James E. Alatis; (2) "L'insegnamento della letteratura italiana (The Teaching of Italian Literature)," by Ezio Raimondi; (3) "Objective Evaluation and Transparency," by…

Cybersecurity Protection: Design Science Research toward an Intercloud Transparent Bridge Architecture (ITCOBRA)

ERIC Educational Resources Information Center

Wilson, Joe M.

2013-01-01

This dissertation uses design science research and engineering to develop a cloud-based simulator for modeling next-generation cybersecurity protection frameworks in the United States. The claim is made that an agile and neutral framework extending throughout the cyber-threat plane is needed for critical infrastructure protection (CIP). This…

Learner-Content-Interface as an Approach for Self-Reliant and Student-Centered Learning

ERIC Educational Resources Information Center

Nicolay, Robin; Schwennigcke, Bastian; Sahl, Sarah; Martens, Alke

2015-01-01

Conceptualization and implementation of computer supported teaching and training is currently not tailored to the paradigm of learner centration. Many technical solutions lack transparency and consistency regarding the supported learner activities. An insight into learners activities correlated to learning tasks is needed. In this paper we outline…

Informing Environmental Water Management Decisions: Using Conditional Probability Networks to Address the Information Needs of Planning and Implementation Cycles.

PubMed

Horne, Avril C; Szemis, Joanna M; Webb, J Angus; Kaur, Simranjit; Stewardson, Michael J; Bond, Nick; Nathan, Rory

2018-03-01

One important aspect of adaptive management is the clear and transparent documentation of hypotheses, together with the use of predictive models (complete with any assumptions) to test those hypotheses. Documentation of such models can improve the ability to learn from management decisions and supports dialog between stakeholders. A key challenge is how best to represent the existing scientific knowledge to support decision-making. Such challenges are currently emerging in the field of environmental water management in Australia, where managers are required to prioritize the delivery of environmental water on an annual basis, using a transparent and evidence-based decision framework. We argue that the development of models of ecological responses to environmental water use needs to support both the planning and implementation cycles of adaptive management. Here we demonstrate an approach based on the use of Conditional Probability Networks to translate existing ecological knowledge into quantitative models that include temporal dynamics to support adaptive environmental flow management. It equally extends to other applications where knowledge is incomplete, but decisions must still be made.

Trade policy governance: What health policymakers and advocates need to know.

PubMed

Jarman, Holly

2017-11-01

Trade policies affect determinants of health as well as the options and resources available to health policymakers. There is therefore a need for health policymakers and related stakeholders in all contexts to understand and connect with the trade policymaking process. This paper uses the TAPIC (transparency, accountability, participation, integrity, capacity) governance framework to analyze how trade policy is commonly governed. I conclude that the health sector is likely to benefit when transparency in trade policymaking is increased, since trade negotiations to date have often left out health advocates and policymakers. Trade policymakers and negotiators also tend to be accountable to economic and trade ministries, which are in turn accountable to economic and business interests. Neither tend to appreciate the health consequences of trade and trade policies. Greater accountability to health ministries and interests, and greater participation by them, could improve the health effects of trade negotiations. Trade policies are complex, requiring considerable policy capacity to understand and influence. Nevertheless, investing in understanding trade can pay off in terms of managing future legal risks. Copyright © 2017. Published by Elsevier B.V.

Informing Environmental Water Management Decisions: Using Conditional Probability Networks to Address the Information Needs of Planning and Implementation Cycles

NASA Astrophysics Data System (ADS)

Horne, Avril C.; Szemis, Joanna M.; Webb, J. Angus; Kaur, Simranjit; Stewardson, Michael J.; Bond, Nick; Nathan, Rory

2018-03-01

One important aspect of adaptive management is the clear and transparent documentation of hypotheses, together with the use of predictive models (complete with any assumptions) to test those hypotheses. Documentation of such models can improve the ability to learn from management decisions and supports dialog between stakeholders. A key challenge is how best to represent the existing scientific knowledge to support decision-making. Such challenges are currently emerging in the field of environmental water management in Australia, where managers are required to prioritize the delivery of environmental water on an annual basis, using a transparent and evidence-based decision framework. We argue that the development of models of ecological responses to environmental water use needs to support both the planning and implementation cycles of adaptive management. Here we demonstrate an approach based on the use of Conditional Probability Networks to translate existing ecological knowledge into quantitative models that include temporal dynamics to support adaptive environmental flow management. It equally extends to other applications where knowledge is incomplete, but decisions must still be made.

Transforming health care delivery through consumer engagement, health data transparency, and patient-generated health information.

PubMed

Sands, D Z; Wald, J S

2014-08-15

Address current topics in consumer health informatics. Literature review. Current health care delivery systems need to be more effective in the management of chronic conditions as the population turns older and experiences escalating chronic illness that threatens to consume more health care resources than countries can afford. Most health care systems are positioned poorly to accommodate this. Meanwhile, the availability of ever more powerful and cheaper information and communication technology, both for professionals and consumers, has raised the capacity to gather and process information, communicate more effectively, and monitor the quality of care processes. Adapting health care systems to serve current and future needs requires new streams of data to enable better self-management, improve shared decision making, and provide more virtual care. Changes in reimbursement for health care services, increased adoption of relevant technologies, patient engagement, and calls for data transparency raise the importance of patient-generated health information, remote monitoring, non-visit based care, and other innovative care approaches that foster more frequent contact with patients and better management of chronic conditions.

Personal communications: An extension to the mobile satellite

NASA Technical Reports Server (NTRS)

Epstein, Murray; Draper, Francois

1990-01-01

As time progresses, customer demands become far more universal, involving integrated, simple to operate, cost effective services, with technology virtually transparent to the operator. Industry will be in a position of providing the necessary services to meet the subscribers' needs. Our resource based industries, transportation services, and utilities in the more rural and unserviced areas will require quality and affordable services that can only be supplied via satellite. One answer to these needs will be one- and two-way interoperable data messaging.

Bottom-up priority setting revised. A second evaluation of an institutional intervention in a Swedish health care organisation.

PubMed

Waldau, Susanne

2015-09-01

Transparent priority setting in health care based on specific ethical principles is requested by the Swedish Parliament since 1997. Implementation has been limited. In this case, transparent priority setting was performed for a second time round and engaged an entire health care organisation. Objectives were to refine a bottom-up priority setting process, reach a political decision on service limits to make reallocation towards higher prioritised services possible, and raise systems knowledge. An action research approach was chosen. The national model for priority setting was used with addition of dimensions costs, volumes, gender distribution and feasibility. The intervention included a three step process and specific procedures for each step which were created, revised and evaluated regarding factual and functional aspects. Evaluations methods included analyses of documents, recordings and surveys. Vertical and horizontal priority setting occurred and resources were reallocated. Participants' attitudes remained positive, however less so than in the first priority setting round. Identifying low-priority services was perceived difficult, causing resentment and strategic behaviour. The horizontal stage served to raise quality of the knowledge base, level out differences in ranking of services and raise systems knowledge. Existing health care management systems do not meet institutional requirements for transparent priority setting. Introducing transparent priority setting constitutes a complex institutional reform, which needs to be driven by management/administration. Strong managerial commitment is required. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Rapid evidence assessment: increasing the transparency of an emerging methodology.

PubMed

Varker, Tracey; Forbes, David; Dell, Lisa; Weston, Adele; Merlin, Tracy; Hodson, Stephanie; O'Donnell, Meaghan

2015-12-01

Within the field of evidence-based practice, policy makers, health care professionals and consumers require timely reviews to inform decisions on efficacious health care and treatments. Rapid evidence assessment (REA), also known as rapid review, has emerged in recent years as a literature review methodology that fulfils this need. It highlights what is known in a clinical area to the target audience in a relatively short time frame. This article discusses the lack of transparency and limited critical appraisal that can occur in REA, and goes on to propose general principles for conducting a REA. The approach that we describe is consistent with the principles underlying systematic review methodology, but also makes allowances for the rapid delivery of information as required while utilizing explicit and reproducible methods at each stage. Our method for conducting REA includes: developing an explicit research question in consultation with the end-users; clear definition of the components of the research question; development of a thorough and reproducible search strategy; development of explicit evidence selection criteria; and quality assessments and transparent decisions about the level of information to be obtained from each study. In addition, the REA may also include an assessment of the quality of the total body of evidence. Transparent reporting of REA methodologies will provide greater clarity to end-users about how the information is obtained and about the trade-offs that are made between speed and rigour. © 2015 John Wiley & Sons, Ltd.

Making Good Decisions in Healthcare with Multi-Criteria Decision Analysis: The Use, Current Research and Future Development of MCDA.

PubMed

Mühlbacher, Axel C; Kaczynski, Anika

2016-02-01

Healthcare decision making is usually characterized by a low degree of transparency. The demand for transparent decision processes can be fulfilled only when assessment, appraisal and decisions about health technologies are performed under a systematic construct of benefit assessment. The benefit of an intervention is often multidimensional and, thus, must be represented by several decision criteria. Complex decision problems require an assessment and appraisal of various criteria; therefore, a decision process that systematically identifies the best available alternative and enables an optimal and transparent decision is needed. For that reason, decision criteria must be weighted and goal achievement must be scored for all alternatives. Methods of multi-criteria decision analysis (MCDA) are available to analyse and appraise multiple clinical endpoints and structure complex decision problems in healthcare decision making. By means of MCDA, value judgments, priorities and preferences of patients, insurees and experts can be integrated systematically and transparently into the decision-making process. This article describes the MCDA framework and identifies potential areas where MCDA can be of use (e.g. approval, guidelines and reimbursement/pricing of health technologies). A literature search was performed to identify current research in healthcare. The results showed that healthcare decision making is addressing the problem of multiple decision criteria and is focusing on the future development and use of techniques to weight and score different decision criteria. This article emphasizes the use and future benefit of MCDA.

Exploring academics' views on designs, methods, characteristics and outcomes of inclusive health research with people with intellectual disabilities: a modified Delphi study

PubMed Central

Frankena, T K; Naaldenberg, J; Cardol, M; Meijering, J V; Leusink, G; van Schrojenstein Lantman-de Valk, H M J

2016-01-01

Background The British Medical Journal's (BMJ's) patient revolution strives for collaboration with patients in healthcare and health research. This paper studies collaboration with people with intellectual disabilities (ID) in health research, also known as inclusive health research. Currently, transparency and agreement among academics is lacking regarding its main aspects, preventing upscaling of the patient revolution. Objective This study aims to gain agreement among academics on 3 aspects of inclusive health research for people with ID: (1) designs and methods, (2) most important characteristics and (3) outcomes. Design A Delphi study was conducted with academics with experience in inclusive (health) research and on people with ID. The study consisted of 2 sequential questionnaire rounds (n=24; n=17), followed by in-depth interviews (n=10). Results Academics agreed on (1) a collaborative approach to be most suitable to inclusive health research, (2) characteristics regarding the accessibility and facilitation of inclusive health research, and (3) several outcomes of inclusive health research for people with ID and healthcare. Other characteristics agreed on included: atmosphere, relationship, engagement, partnership and power. It was stressed that these characteristics ensure meaningful inclusion. Interviewed academics voiced the need for a tool supporting the facilitation and evaluation of inclusive health research. There was ambiguity as to what this tool should comprise and the extent to which it was possible to capture the complex process of inclusive health research. Discussion and conclusions This study underlines the need for transparency, facilitation and evaluation of inclusive health research. The need for in-depth interviews after 2 Delphi rounds underlines its complexity and context dependence. To increase process transparency, future research should focus on gaining insight into inclusive health research in its context. A tool could be developed to facilitate and evaluate inclusive health research. This tool will be partially applicable to participatory research in general and thereby upscale the patient revolution. PMID:27540101

Engineered inorganic nanoparticles and cosmetics: facts, issues, knowledge gaps and challenges.

PubMed

Wiechers, Johann W; Musee, Ndeke

2010-10-01

The cosmetic industry is among the first adaptors of nanotechnology through the use of engineered nanoparticles (ENPs) to enhance the performance of their products and meet the customers' needs. Recently, there have been increasing concerns from different societal stakeholders (e.g., governments, environmental activist pressure groups, scientists, general public, etc.) concerning the safety and environmental impact of ENPs used in cosmetics. This review paper seeks to address the twin concerns of the safety of cosmetics and the potential environmental impacts due to the constituent chemicals-the ENPs. The safety aspect is addressed by examining recently published scientific data on the possibility of ENPs penetrating human skin. Data indicates that although particular types of ENPs can penetrate into the skin, until now no penetration has been detected beyond the stratum corneum of the ENPs used in cosmetics. Yet, important lessons can be learned from the more recent studies that identify the characteristics of ENPs penetrating into and permeating through human skin. On the part of the environmental impact, the scientific literature has very limited or none existent specific articles addressing the environmental impacts of ENPs owing to the cosmetic products. Therefore, general ecotoxicological data on risk assessment of ENPs has been applied to ascertain if there are potential environmental impacts from cosmetics. Results include some of the first studies on the qualitative and quantitative risk assessment of ENPs from cosmetics and suggest that further research is required as the knowledge is incomplete to make definitive conclusions as is the case with skin penetration. The authors conclude that the cosmetic industry should be more transparent in its use of nanotechnology in cosmetic products to facilitate realistic risk assessments as well as scientists and pressure groups being accurate in their conclusions on the general applicability of their findings. Transparency in cosmetics needs nanotechnology, but nanotechnology in cosmetics also needs transparency...

Transparent electrodes in silicon heterojunction solar cells: Influence on contact passivation

DOE PAGES

Tomasi, Andrea; Sahli, Florent; Seif, Johannes Peter; ...

2015-10-26

Charge carrier collection in silicon heterojunction solar cells occurs via intrinsic/doped hydrogenated amorphous silicon layer stacks deposited on the crystalline silicon wafer surfaces. Usually, both the electron and hole collecting stacks are externally capped by an n-type transparent conductive oxide, which is primarily needed for carrier extraction. Earlier, it has been demonstrated that the mere presence of such oxides can affect the carrier recombination in the crystalline silicon absorber. Here, we present a detailed investigation of the impact of this phenomenon on both the electron and hole collecting sides, including its consequences for the operating voltages of silicon heterojunction solarmore » cells. As a result, we define guiding principles for improved passivating contact design for high-efficiency silicon solar cells.« less

Enhanced Traceability for Bulk Processing of Sentinel-Derived Information Products

NASA Astrophysics Data System (ADS)

Lankester, Thomas; Hubbard, Steven; Knowelden, Richard

2016-08-01

The advent of widely available, systematically acquired and advanced Earth observations from the Sentinel platforms is spurring development of a wide range of derived information products. Whilst welcome, this rapid rate of development inevitably leads to some processing instability as algorithms and production steps are required to evolve accordingly. To mitigate this instability, the provenance of EO-derived information products needs to be traceable and transparent.Airbus Defence and Space (Airbus DS) has developed the Airbus Processing Cloud (APC) as a virtualised processing farm for bulk production of EO-derived data and information products. The production control system of the APC transforms internal configuration control information into an INSPIRE metadata file containing a stepwise set of processing steps and data source elements that provide the complete and transparent provenance of each product generated.

Transparent electrodes in silicon heterojunction solar cells: Influence on contact passivation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomasi, Andrea; Sahli, Florent; Seif, Johannes Peter

Charge carrier collection in silicon heterojunction solar cells occurs via intrinsic/doped hydrogenated amorphous silicon layer stacks deposited on the crystalline silicon wafer surfaces. Usually, both the electron and hole collecting stacks are externally capped by an n-type transparent conductive oxide, which is primarily needed for carrier extraction. Earlier, it has been demonstrated that the mere presence of such oxides can affect the carrier recombination in the crystalline silicon absorber. Here, we present a detailed investigation of the impact of this phenomenon on both the electron and hole collecting sides, including its consequences for the operating voltages of silicon heterojunction solarmore » cells. As a result, we define guiding principles for improved passivating contact design for high-efficiency silicon solar cells.« less

Privacy Policy Enforcement for Ambient Ubiquitous Services

NASA Astrophysics Data System (ADS)

Oyomno, Were; Jäppinen, Pekka; Kerttula, Esa

Ubiquitous service providers leverage miniaturised computing terminals equipped with wireless capabilities to avail new service models. These models are pivoted on personal and inexpensive terminals to customise services to individual preferences. Portability, small sizes and compact keyboards are few features popularising mobile terminals. Features enable storing and carrying of ever increasing proportions of personal data and ability to use them in service adaptations. Ubiquitous services automate deeper soliciting of personal data transparently without the need for user interactions. Transparent solicitations, acquisitions and handling of personal data legitimises privacy concerns regarding disclosures, retention and re-use of the data. This study presents a policy enforcement for ubiquitous services that safeguards handling of users personal data and monitors adherence to stipulated privacy policies. Enforcement structures towards usability and scalability are presented.

Modifications to the rapid melt/rapid quench and transparent polymer video furnaces for the KC-135

NASA Technical Reports Server (NTRS)

Smith, Guy A.; Kosten, Sue E.; Workman, Gary L.

1990-01-01

Given here is a summary of tasks performed on two furnace systems, the Transparent Polymer (TPF) and the Rapid Melt/Rapid Quench (RMRQ) furnaces, to be used aboard NASA's KC-135. It was determined that major changes were needed for both furnaces to operate according to the scientific investigators' experiment parameters. Discussed here are what the problems were, what was required to solve the problems, and possible future enhancements. It was determined that the enhancements would be required for the furnaces to perform at their optimal levels. Services provided include hardware and software modifications, Safety DataPackage documentation, ground based testing, transportation to and from Ellington Air Field, operation of hardware during KC-135 flights, and post-flight data processing.

Neural decoding of treadmill walking from noninvasive electroencephalographic signals

PubMed Central

Presacco, Alessandro; Goodman, Ronald; Forrester, Larry

2011-01-01

Chronic recordings from ensembles of cortical neurons in primary motor and somatosensory areas in rhesus macaques provide accurate information about bipedal locomotion (Fitzsimmons NA, Lebedev MA, Peikon ID, Nicolelis MA. Front Integr Neurosci 3: 3, 2009). Here we show that the linear and angular kinematics of the ankle, knee, and hip joints during both normal and precision (attentive) human treadmill walking can be inferred from noninvasive scalp electroencephalography (EEG) with decoding accuracies comparable to those from neural decoders based on multiple single-unit activities (SUAs) recorded in nonhuman primates. Six healthy adults were recorded. Participants were asked to walk on a treadmill at their self-selected comfortable speed while receiving visual feedback of their lower limbs (i.e., precision walking), to repeatedly avoid stepping on a strip drawn on the treadmill belt. Angular and linear kinematics of the left and right hip, knee, and ankle joints and EEG were recorded, and neural decoders were designed and optimized with cross-validation procedures. Of note, the optimal set of electrodes of these decoders were also used to accurately infer gait trajectories in a normal walking task that did not require subjects to control and monitor their foot placement. Our results indicate a high involvement of a fronto-posterior cortical network in the control of both precision and normal walking and suggest that EEG signals can be used to study in real time the cortical dynamics of walking and to develop brain-machine interfaces aimed at restoring human gait function. PMID:21768121

Devices and dressings to secure peripheral venous catheters to prevent complications.

PubMed

Marsh, Nicole; Webster, Joan; Mihala, Gabor; Rickard, Claire M

2015-06-12

A peripheral venous catheter (PVC) is typically used for short-term delivery of intravascular fluids and medications. It is an essential element of modern medicine and the most frequent invasive procedure performed in hospitals. However, PVCs often fail before intravenous treatment is completed: this can occur because the device is not adequately attached to the skin, allowing the PVC to fall out, leading to complications such as phlebitis (irritation or inflammation to the vein wall), infiltration (fluid leaking into surrounding tissues) or occlusion (blockage). An inadequately secured PVC also increases the risk of catheter-related bloodstream infection (CRBSI), as the pistoning action (moving back and forth in the vein) of the catheter can allow migration of organisms along the catheter and into the bloodstream. Despite the many dressings and securement devices available, the impact of different securement techniques for increasing PVC dwell time is still unclear; there is a need to provide guidance for clinicians by reviewing current studies systematically. To assess the effects of PVC dressings and securement devices on the incidence of PVC failure. We searched the following electronic databases to identify reports of relevant randomised controlled trials (RCTs): the Cochrane Wounds Group Register (searched 08 April 2015): The Cochrane Central Register of Controlled Trials (CENTRAL; 2015, Issue 3), Ovid MEDLINE (1946 to March 7 2015); Ovid MEDLINE (In-Process & Other Non-Indexed Citations, March 7 2015); Ovid EMBASE (1974 to March 7 2015); and EBSCO CINAHL (1982 to March 8 2015). RCTs or cluster RCTs comparing different dressings or securement devices for the stabilisation of PVCs. Cross-over trials were ineligible for inclusion, unless data for the first treatment period could be obtained. Two review authors independently selected studies, assessed trial quality and extracted data. We contacted study authors for missing information. We used standard methodological procedures expected by Cochrane. We included six RCTs (1539 participants) in this review. Trial sizes ranged from 50 to 703 participants. These six trials made four comparisons, namely: transparent dressings versus gauze; bordered transparent dressings versus a securement device; bordered transparent dressings versus tape; and transparent dressing versus sticking plaster. There is very low quality evidence of fewer catheter dislodgements or accidental removals with transparent dressings compared with gauze (two studies, 278 participants, RR 0.40; 95% CI 0.17 to 0.92, P = 0.03%). The relative effects of transparent dressings and gauze on phlebitis (RR 0.89; 95% CI 0.47 to 1.68) and infiltration (RR 0.80; 95% CI 0.48 to 1.33) are unclear. The relative effects on PVC failure of a bordered transparent dressing and a securement device have been assessed in only one small study and these were unclear. There was very low quality evidence from the same single study of less frequent dislodgement or accidental catheter removal with bordered transparent dressings than securement devices (RR 0.14, 95% CI 0.03 to 0.63) but more phlebitis with bordered dressings (RR 8.11, 95% CI 1.03 to 64.02) (very low quality evidence). A small single study compared bordered transparent dressings with tape and found very low quality evidence of more PVC failure with the bordered dressing (RR 1.84, 95% CI 1.08 to 3.11) but the relative effects on dislodgement were not clear (very low quality evidence). The relative effects of transparent dressings and a sticking plaster have only been compared in one small study and are unclear. More high quality RCTs are required to determine the relative effects of alternative PVC dressings and securement devices. It is not clear if any one dressing or securement device is better than any other in securing peripheral venous catheters. There is a need for further, independent high quality trials to evaluate the many traditional as well as the newer, high use products. Given the large cost differences between some different dressings and securement devices, future trials should include a robust cost-effectiveness analysis.

A call for more transparency of registered clinical trials on endometriosis

PubMed Central

Guo, Sun-Wei; Hummelshoj, Lone; Olive, David L.; Bulun, Serdar E.; D'Hooghe, Thomas M.; Evers, Johannes L.H.

2009-01-01

In response to the pressing need for more efficacious and safer therapeutics for endometriosis, there have been numerous reports in the last decade of positive results from animal and in vitro studies of various compounds as potential therapeutics for endometriosis. A handful of these have undergone phase II/III clinical trials. Since the announcement of the International Committee of Medical Journal Editors that mandated registration as a prerequisite for publication, 57 endometriosis-related clinical trials have been registered at ClinicalTrials.gov, an Internet-based public depository for information on drug studies. Among them, 25 are listed as completed, and 2 as suspended. There are 15 completed phase II/III trials, which evaluated the efficacy of various promising compounds. Yet only three of the 15 trials (20%) have published their results. The remaining 12 (80%) studies so far have not published their findings. We argue that this apparent lack of transparency will actually not benefit the trial sponsors or the public, and will ultimately prove detrimental to research efforts attempting to develop more efficacious and safer therapeutics for endometriosis. Thus we call for more transparency of clinical trials on endometriosis. PMID:19264712

The association of hospital governance with innovation in Taiwan.

PubMed

Yang, Chen-Wei; Yan, Yu-Hua; Fang, Shih-Chieh; Inamdar, Syeda Noorein; Lin, Hsien-Cheng

2018-01-01

Hospitals in Taiwan are facing major changes and innovation is increasingly becoming a critical factor for remaining competitive. One determinant that can have a significant impact on innovation is hospital governance. However, there is limited prior research on the relationship between hospital governance and innovation. The purpose of this study is to propose a conceptual framework to hypothesize the relationship between governance mechanisms and innovation and to empirically test the hypotheses in hospital organizations. We examine the relationship between governance mechanisms and innovation using data on 102 hospitals in Taiwan from the Taiwan Joint Commission on Hospital Accreditation and Quality Improvement. We model governance mechanisms using board structure, information transparency and strategic decision-making processes. For our modeling and data analysis we use measurement and structural models. We find that in hospital governance, information transparency and strategic decision making did impact innovation. However, governance structure did not. To facilitate innovation, hospital boards can increase information transparency and improve the decision-making process when considering strategic investments in innovative initiatives. To remain competitive, hospital boards need to develop and monitor indices that measure hospital innovation to ensure ongoing progress. Copyright © 2017 John Wiley & Sons, Ltd.

Facile Synthesis of Ultralong and Thin Copper Nanowires and Its Application to High-Performance Flexible Transparent Conductive Electrodes

NASA Astrophysics Data System (ADS)

Wang, Yaxiong; Liu, Ping; Zeng, Baoqing; Liu, Liming; Yang, Jianjun

2018-03-01

A hydrothermal method for synthesizing ultralong and thin copper nanowires (CuNWs) with average diameter of 35 nm and average length of 100 μm is demonstrated in this paper. The concerning raw materials include copric (II) chloride dihydrate (CuCl2·2H2O), octadecylamine (ODA), and ascorbic acid, which are all very cheap and nontoxic. The effect of different reaction time and different molar ratios to the reaction products were researched. The CuNWs prepared by the hydrothermal method were applied to fabricate CuNW transparent conductive electrode (TCE), which exhibited excellent conductivity-transmittance performance with low sheet resistance of 26.23 Ω /\\square and high transparency at 550 nm of 89.06% (excluding Polyethylene terephthalate (PET) substrate). The electrode fabrication process was carried out at room temperature, and there was no need for post-treatment. In order to decrease roughness and protect CuNW TCEs against being oxidized, we fabricated CuNW/poly(methyl methacrylate) (PMMA) hybrid TCEs (HTCEs) using PMMA solution. The CuNW/PMMA HTCEs exhibited low surface roughness and chemical stability as compared with CuNW TCEs.

Challenges of healthcare administration: optimizing quality and value at an affordable cost in pediatric cardiology.

PubMed

Cohen, Mitchell I; Frias, Patricio A

2018-01-01

The purpose of this review is to explore the paradigm shift in healthcare delivery that will need to take place over the next few years away from an emphasis on supply-driven health care to better quality transparent-driven health care whose focus is on the consumer's best interest. The current healthcare system is fragmented and costs continue to rise. The best way to contain costs is to improve quality to the consumer, the patient. Physicians and hospitals need to align in a team-based approach that allows physicians to understand current costs and how to strive toward a focus on healthcare outcomes. Pediatric cardiology is a unique discipline that cares for patients with complex congenital conditions that will span their lifetime and also involves not just cardiology but surgery, intensive care, anesthesia, nursing, and a host of inpatient and ambulatory services. Understanding what matters to the patient and his/her family and presenting quality outcomes in a transparent fashion will gradually allow a shift to take place away from physician visits, tests ordered, and procedures performed. This can only be achieved with physicians, given the appropriate tools to understand costs, value, and outcomes and models where the hospitals and physicians are aligned. The transformation to a value-based healthcare system is beginning and pediatric cardiologists need to be educated, given the appropriate resources, receive appropriate feedback, and patients need to be part of the solution so that care providers can understand what matters most to them.

EarthCube Activities: Community Engagement Advancing Geoscience Research

NASA Astrophysics Data System (ADS)

Kinkade, D.

2015-12-01

Our ability to advance scientific research in order to better understand complex Earth systems, address emerging geoscience problems, and meet societal challenges is increasingly dependent upon the concept of Open Science and Data. Although these terms are relatively new to the world of research, Open Science and Data in this context may be described as transparency in the scientific process. This includes the discoverability, public accessibility and reusability of scientific data, as well as accessibility and transparency of scientific communication (www.openscience.org). Scientists and the US government alike are realizing the critical need for easy discovery and access to multidisciplinary data to advance research in the geosciences. The NSF-supported EarthCube project was created to meet this need. EarthCube is developing a community-driven common cyberinfrastructure for the purpose of accessing, integrating, analyzing, sharing and visualizing all forms of data and related resources through advanced technological and computational capabilities. Engaging the geoscience community in EarthCube's development is crucial to its success, and EarthCube is providing several opportunities for geoscience involvement. This presentation will provide an overview of the activities EarthCube is employing to entrain the community in the development process, from governance development and strategic planning, to technical needs gathering. Particular focus will be given to the collection of science-driven use cases as a means of capturing scientific and technical requirements. Such activities inform the development of key technical and computational components that collectively will form a cyberinfrastructure to meet the research needs of the geoscience community.

Enhancing medicine price transparency through price information mechanisms

PubMed Central

2014-01-01

Background Medicine price information mechanisms provide an essential tool to countries that seek a better understanding of product availability, market prices and price compositions of individual medicines. To be effective and contribute to cost savings, these mechanisms need to consider prices in their particular contexts when comparing between countries. This article discusses in what ways medicine price information mechanisms can contribute to increased price transparency and how this may affect access to medicines for developing countries. Methods We used data collected during the course of a WHO project focusing on the development of a vaccine price and procurement information mechanism. The project collected information from six medicine price information mechanisms and interviewed data managers and technical experts on key aspects as well as observed market effects of these mechanisms. The reviewed mechanisms were broken down into categories including objective and target audience, as well as the sources, types and volumes of data included. Information provided by the mechanisms was reviewed according to data available on medicine prices, product characteristics, and procurement modalities. Results We found indications of positive effects on access to medicines resulting from the utilization of the reviewed mechanisms. These include the uptake of higher quality medicines, more favorable results from contract negotiations, changes in national pricing policies, and the decrease of prices in certain segments for countries participating in or deriving data from the various mechanisms. Conclusion The reviewed mechanisms avoid the methodological challenges observed for medicine price comparisons that only use national price databases. They work with high quality data and display prices in the appropriate context of procurement modalities as well as the peculiarities of purchasing countries. Medicine price information mechanisms respond to the need for increased medicine price transparency and have the potential to contribute to improved access to medicines in developing countries. Additional research is required to explore more specific aspects. These include the market effects of dedicated donor funds for certain medicines to explain the driving force of user demands, and the effects of increased price transparency on different groups of medicines in context of the maturity of their markets. PMID:24885767

Enhancing medicine price transparency through price information mechanisms.

PubMed

Hinsch, Michael; Kaddar, Miloud; Schmitt, Sarah

2014-05-08

Medicine price information mechanisms provide an essential tool to countries that seek a better understanding of product availability, market prices and price compositions of individual medicines. To be effective and contribute to cost savings, these mechanisms need to consider prices in their particular contexts when comparing between countries. This article discusses in what ways medicine price information mechanisms can contribute to increased price transparency and how this may affect access to medicines for developing countries. We used data collected during the course of a WHO project focusing on the development of a vaccine price and procurement information mechanism. The project collected information from six medicine price information mechanisms and interviewed data managers and technical experts on key aspects as well as observed market effects of these mechanisms.The reviewed mechanisms were broken down into categories including objective and target audience, as well as the sources, types and volumes of data included. Information provided by the mechanisms was reviewed according to data available on medicine prices, product characteristics, and procurement modalities. We found indications of positive effects on access to medicines resulting from the utilization of the reviewed mechanisms. These include the uptake of higher quality medicines, more favorable results from contract negotiations, changes in national pricing policies, and the decrease of prices in certain segments for countries participating in or deriving data from the various mechanisms. The reviewed mechanisms avoid the methodological challenges observed for medicine price comparisons that only use national price databases. They work with high quality data and display prices in the appropriate context of procurement modalities as well as the peculiarities of purchasing countries. Medicine price information mechanisms respond to the need for increased medicine price transparency and have the potential to contribute to improved access to medicines in developing countries.Additional research is required to explore more specific aspects. These include the market effects of dedicated donor funds for certain medicines to explain the driving force of user demands, and the effects of increased price transparency on different groups of medicines in context of the maturity of their markets.

Checkpoint-Restart in User Space

DOE Office of Scientific and Technical Information (OSTI.GOV)

CRUISE implements a user-space file system that stores data in main memory and transparently spills over to other storage, like local flash memory or the parallel file system, as needed. CRUISE also exposes file contents fo remote direct memory access, allowing external tools to copy files to the parallel file system in the background with reduced CPU interruption.

Activated Biological Filters (ABF Towers). Instructor's Guide. Biological Treatment Process Control.

ERIC Educational Resources Information Center

Wooley, John F.

This instructor's manual contains materials needed to teach a two-lesson unit on activated bio-filters (ABF). These materials include: (1) an overview of the two lessons; (2) lesson plans; (3) lecture outlines (keyed to a set of slides designed for use with the lessons); (4) overhead transparency masters; (5) worksheets for each lesson (with…

Levelized Cost of Energy Calculator | Energy Analysis | NREL

Science.gov Websites

Levelized Cost of Energy Calculator Levelized Cost of Energy Calculator Transparent Cost Database Button The levelized cost of energy (LCOE) calculator provides a simple calculator for both utility-scale need to be included for a thorough analysis. To estimate simple cost of energy, use the slider controls

Human Capital: Opportunities To Improve Executive Agencies' Hiring Processes. Report to Congressional Requesters.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

Current federal hiring problems result in processes that do not meet the needs of (1) agencies in achieving their missions, (2) managers in filling positions, and (3) applicants for a timely, efficient, transparent, and merit-based process. Federal human resources directors from the 24 major federal departments and agencies found time-to-hire a…

Fertilizer and Lime: Why They Are Used.

ERIC Educational Resources Information Center

McCaslin, Judith Strand

This unit teaching guide is designed to help teachers explain the principles of fertilizer and lime use. The first of four major sections is a teaching outline keyed to transparency masters and student handouts. Thirteen major areas are covered in the teaching outline: (1) plant needs; (2) uses of fertilizer; (3) nutrients for plant growth; (4)…

Actions Speak Louder than Numbers. ICDI Annual Report 2012

ERIC Educational Resources Information Center

International Child Development Initiatives (NJ1), 2012

2012-01-01

In the past years there has been a growing call for (financial) transparency of developmental aid organizations. The general public, or maybe better put: the popular media, are demanding information on cost efficiency and impact of projects. Development aid needs to prove its worth, that's what it basically boils down to. Of course there is…

76 FR 18228 - Best Pharmaceuticals for Children Act (BPCA) Priority List of Needs in Pediatric Therapeutics

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... frequency of use and frequency of condition) as well as expert input, a better approach for mass outreach... process, including transparency, stakeholder input, and leadership; and Expert involvement to inform and... BPCA Web site, http://bpca.nichd.nih.gov . As a final step in the process, the NICHD, with input from...

77 FR 18907 - Schedule of Fees for Consular Services, Department of State and Overseas Embassies and Consulates

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-29

... 10, 2007, report ``Transparent Cost Estimates Needed to Support Passport Execution Fee Decisions... reporting or recordkeeping requirements. List of Subjects 22 CFR Part 22 Passports and visas. 22 CFR Part 42 Immigration, Passports and visas. Accordingly, for the reasons stated in the preamble, 22 CFR parts 22 and 42...

Which Tasks Best Discriminate between Dyslexic University Students and Controls in a Transparent Language?

ERIC Educational Resources Information Center

Re, Anna Maria; Tressoldi, Patrizio E.; Cornoldi, Cesare; Lucangeli, Daniela

2011-01-01

The need for a battery for testing adult dyslexia, and especially university students, is being increasingly recognized in view of the increased number of adult requests for a dyslexia examination in relation to both assistance and protection from discrimination. The present study examines the discriminative validity of a battery we have…

Field Evaluation of Open System Chambers for Measuring Whole Canopy Gas Exchanges

USDA-ARS?s Scientific Manuscript database

The ability to monitor whole canopy CO2 and H2O fluxes of crop plants in the field is needed for many research efforts ranging from plant breeding to the study of Climate Change effects on crops. Four portable, transparent, open system chambers for measuring canopy gas exchanges were field tested on...

Toward a Transparent Construct of Reading-to-Write Tasks: The Interface between Discourse Features and Proficiency

ERIC Educational Resources Information Center

Gebril, Atta; Plakans, Lia

2013-01-01

As a growing number of testing programs use integrated writing tasks, more validation research is needed to inform stakeholders about score use and interpretation. The current study investigates the relationship between writing proficiency and discourse features in an integrated reading-writing task. At a Middle Eastern university, 136…

Digital photo monitoring for tree crown

Treesearch

Neil Clark; Sang-Mook Lee

2007-01-01

Assessing change in the amount of foliage within a tree’s crown is the goal of crown transparency estimation, a component in many forest health assessment programs. Many sources of variability limit analysis and interpretation of crown condition data. Increased precision is needed to detect more subtle changes that are important for detection of health problems....

78 FR 14149 - 2012 Fiscal Transparency Report

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-04

... DEPARTMENT OF STATE [Public Notice 8213] 2012 Fiscal Transparency Report AGENCY: Department of... Fiscal Transparency review process in its first annual Fiscal Transparency Report. This report describes... the standard. FY 2012 Fiscal Transparency Report The Department of State hereby presents the findings...

Visibly transparent polymer solar cells produced by solution processing.

PubMed

Chen, Chun-Chao; Dou, Letian; Zhu, Rui; Chung, Choong-Heui; Song, Tze-Bin; Zheng, Yue Bing; Hawks, Steve; Li, Gang; Weiss, Paul S; Yang, Yang

2012-08-28

Visibly transparent photovoltaic devices can open photovoltaic applications in many areas, such as building-integrated photovoltaics or integrated photovoltaic chargers for portable electronics. We demonstrate high-performance, visibly transparent polymer solar cells fabricated via solution processing. The photoactive layer of these visibly transparent polymer solar cells harvests solar energy from the near-infrared region while being less sensitive to visible photons. The top transparent electrode employs a highly transparent silver nanowire-metal oxide composite conducting film, which is coated through mild solution processes. With this combination, we have achieved 4% power-conversion efficiency for solution-processed and visibly transparent polymer solar cells. The optimized devices have a maximum transparency of 66% at 550 nm.

Transparent lithium-ion batteries

PubMed Central

Yang, Yuan; Jeong, Sangmoo; Hu, Liangbing; Wu, Hui; Lee, Seok Woo; Cui, Yi

2011-01-01

Transparent devices have recently attracted substantial attention. Various applications have been demonstrated, including displays, touch screens, and solar cells; however, transparent batteries, a key component in fully integrated transparent devices, have not yet been reported. As battery electrode materials are not transparent and have to be thick enough to store energy, the traditional approach of using thin films for transparent devices is not suitable. Here we demonstrate a grid-structured electrode to solve this dilemma, which is fabricated by a microfluidics-assisted method. The feature dimension in the electrode is below the resolution limit of human eyes, and, thus, the electrode appears transparent. Moreover, by aligning multiple electrodes together, the amount of energy stored increases readily without sacrificing the transparency. This results in a battery with energy density of 10 Wh/L at a transparency of 60%. The device is also flexible, further broadening their potential applications. The transparent device configuration also allows in situ Raman study of fundamental electrochemical reactions in batteries. PMID:21788483

Separating Drought Effects from Roof Artifacts on Ecosystem Processes in a Grassland Drought Experiment

PubMed Central

Vogel, Anja; Fester, Thomas; Eisenhauer, Nico; Scherer-Lorenzen, Michael; Schmid, Bernhard; Weisser, Wolfgang W.; Weigelt, Alexandra

2013-01-01

1 Given the predictions of increased drought probabilities under various climate change scenarios, there have been numerous experimental field studies simulating drought using transparent roofs in different ecosystems and regions. Such roofs may, however, have unknown side effects, called artifacts, on the measured variables potentially confounding the experimental results. A roofed control allows the quantification of potential artifacts, which is lacking in most experiments. 2 We conducted a drought experiment in experimental grasslands to study artifacts of transparent roofs and the resulting effects of artifacts on ecosystems relative to drought on three response variables (aboveground biomass, litter decomposition and plant metabolite profiles). We established three drought treatments, using (1) transparent roofs to exclude rainfall, (2) an unroofed control treatment receiving natural rainfall and (3) a roofed control, nested in the drought treatment but with rain water reapplied according to ambient conditions. 3 Roofs had a slight impact on air (+0.14°C during night) and soil temperatures (−0.45°C on warm days, +0.25°C on cold nights), while photosynthetically active radiation was decreased significantly (−16%). Aboveground plant community biomass was reduced in the drought treatment (−41%), but there was no significant difference between the roofed and unroofed control, i.e., there were no measurable roof artifact effects. 4 Compared to the unroofed control, litter decomposition was decreased significantly both in the drought treatment (−26%) and in the roofed control treatment (−18%), suggesting artifact effects of the transparent roofs. Moreover, aboveground metabolite profiles in the model plant species Medicago x varia were different from the unroofed control in both the drought and roofed control treatments, and roof artifact effects were of comparable magnitude as drought effects. 5 Our results stress the need for roofed control treatments when using transparent roofs for studying drought effects, because roofs can cause significant side effects. PMID:23936480

Blockchain protocols in clinical trials: Transparency and traceability of consent.

PubMed

Benchoufi, Mehdi; Porcher, Raphael; Ravaud, Philippe

2017-01-01

Clinical trial consent for protocols and their revisions should be transparent for patients and traceable for stakeholders. Our goal is to implement a process allowing for collection of patients' informed consent, which is bound to protocol revisions, storing and tracking the consent in a secure, unfalsifiable and publicly verifiable way, and enabling the sharing of this information in real time. For that, we build a consent workflow using a trending technology called Blockchain. This is a distributed technology that brings a built-in layer of transparency and traceability. From a more general and prospective point of view, we believe Blockchain technology brings a paradigmatical shift to the entire clinical research field. We designed a Proof-of-Concept protocol consisting of time-stamping each step of the patient's consent collection using Blockchain, thus archiving and historicising the consent through cryptographic validation in a securely unfalsifiable and transparent way. For each protocol revision, consent was sought again.  We obtained a single document, in an open format, that accounted for the whole consent collection process: a time-stamped consent status regarding each version of the protocol. This document cannot be corrupted and can be checked on any dedicated public website. It should be considered a robust proof of data. However, in a live clinical trial, the authentication system should be strengthened to remove the need for third parties, here trial stakeholders, and give participative control to the peer users. In the future, the complex data flow of a clinical trial could be tracked by using Blockchain, which core functionality, named Smart Contract, could help prevent clinical trial events not occurring in the correct chronological order, for example including patients before they consented or analysing case report form data before freezing the database. Globally, Blockchain could help with reliability, security, transparency and could be a consistent step toward reproducibility.

Blockchain protocols in clinical trials: Transparency and traceability of consent

PubMed Central

Benchoufi, Mehdi; Porcher, Raphael; Ravaud, Philippe

2018-01-01

Clinical trial consent for protocols and their revisions should be transparent for patients and traceable for stakeholders. Our goal is to implement a process allowing for collection of patients’ informed consent, which is bound to protocol revisions, storing and tracking the consent in a secure, unfalsifiable and publicly verifiable way, and enabling the sharing of this information in real time. For that, we build a consent workflow using a trending technology called Blockchain. This is a distributed technology that brings a built-in layer of transparency and traceability. From a more general and prospective point of view, we believe Blockchain technology brings a paradigmatical shift to the entire clinical research field. We designed a Proof-of-Concept protocol consisting of time-stamping each step of the patient’s consent collection using Blockchain, thus archiving and historicising the consent through cryptographic validation in a securely unfalsifiable and transparent way. For each protocol revision, consent was sought again.  We obtained a single document, in an open format, that accounted for the whole consent collection process: a time-stamped consent status regarding each version of the protocol. This document cannot be corrupted and can be checked on any dedicated public website. It should be considered a robust proof of data. However, in a live clinical trial, the authentication system should be strengthened to remove the need for third parties, here trial stakeholders, and give participative control to the peer users. In the future, the complex data flow of a clinical trial could be tracked by using Blockchain, which core functionality, named Smart Contract, could help prevent clinical trial events not occurring in the correct chronological order, for example including patients before they consented or analysing case report form data before freezing the database. Globally, Blockchain could help with reliability, security, transparency and could be a consistent step toward reproducibility. PMID:29167732

Are we ready to accept the challenge? Addressing the shortcomings of contemporary qualitative health research.

PubMed

Lau, Sofie Rosenlund; Traulsen, Janine M

Qualitative approaches represent an important contributor to health care research. However, several researchers argue that contemporary qualitative research does not live up to its full potential. By presenting a snapshot of contemporary qualitative research in the field of social and administrative pharmacy, this study challenges contributors to the field by asking: Are we ready to accept the challenge and take qualitative research one step further? The purpose of this study was to initiate a constructive dialogue on the need for increased transparency in qualitative data analysis, including explicitly reflecting upon theoretical perspectives affecting the research process. Content analysis was used to evaluate levels of theoretical visibility and analysis transparency in selected qualitative research articles published in Research in Social and Administrative Pharmacy between January 2014 and January 2015. In 14 out of 21 assessed papers, the use of theory was found to be Seemingly Absent (lowest level of theory use), and the data analyses did not include any interpretive endeavors. Only two papers consistently applied theory throughout the entire study and clearly took the data analyses from a descriptive to an interpretive level. It was found that the aim of the majority of assessed papers was to change or modify a given practice, which however, resulted in a lack of both theoretical underpinnings and analysis transparency. This study takes the standpoint that theory and high-quality analysis go hand-in-hand. Based on the content analysis, articles that were deemed to be high in quality were explicit about the theoretical framework of their study and transparent in how they analyzed their data. It was found that theory contributed to the transparency of how the data were analyzed and interpreted. Two ways of improving contemporary qualitative research in the field of social and administrative pharmacy are discussed: engaging with social theory and establishing close collaboration with social scientists. Copyright © 2016 Elsevier Inc. All rights reserved.

The art of transparency.

PubMed

Sayim, Bilge; Cavanagh, Patrick

2011-01-01

Artists throughout the ages have discovered a number of techniques to depict transparency. With only a few exceptions, these techniques follow closely the properties of physical transparency. The two best known properties are X-junctions and the luminance relations described by Metelli. X-junctions are seen where the contours of a transparent material cross contours of the surface behind; Metelli's constraints on the luminance relations between the direct and filtered portions of the surface specify a range of luminance values that are consistent with transparency. These principles have been used by artists since the time of ancient Egypt. However, artists also discovered that stimuli can be seen as transparent even when these physical constraints are not met. Ancient Greek artists, for example, were able to depict transparent materials in simple black-and-white line drawings. Artists also learned how to represent transparency in cases where neither X-junctions nor Metelli's constraints could apply: for example, where no portions of the objects behind the transparent material extend beyond it. Many painters convincingly portrayed transparency in these cases by depicting the effects the transparent medium would have on material or object properties. Here, we show how artists employed these and other techniques revealing their anticipation of current formalizations of perceived transparency, and we suggest new, as-yet-untested principles.

The art of transparency

PubMed Central

Sayim, Bilge; Cavanagh, Patrick

2011-01-01

Artists throughout the ages have discovered a number of techniques to depict transparency. With only a few exceptions, these techniques follow closely the properties of physical transparency. The two best known properties are X-junctions and the luminance relations described by Metelli. X-junctions are seen where the contours of a transparent material cross contours of the surface behind; Metelli's constraints on the luminance relations between the direct and filtered portions of the surface specify a range of luminance values that are consistent with transparency. These principles have been used by artists since the time of ancient Egypt. However, artists also discovered that stimuli can be seen as transparent even when these physical constraints are not met. Ancient Greek artists, for example, were able to depict transparent materials in simple black-and-white line drawings. Artists also learned how to represent transparency in cases where neither X-junctions nor Metelli's constraints could apply: for example, where no portions of the objects behind the transparent material extend beyond it. Many painters convincingly portrayed transparency in these cases by depicting the effects the transparent medium would have on material or object properties. Here, we show how artists employed these and other techniques revealing their anticipation of current formalizations of perceived transparency, and we suggest new, as-yet-untested principles. PMID:23145252

Ba 2TeO as an optoelectronic material: First-principles study

DOE PAGES

Sun, Jifeng; Shi, Hongliang; Du, Mao-Hua; ...

2015-05-21

The band structure, optical and defects properties of Ba 2TeO are systematically investigated using density functional theory with a view to understanding its potential as an optoelectronic or transparent conducting material. Ba 2TeO crystallizes with tetragonal structure (space group P4/nmm) and with a 2.93 eV optical band gap1. We find relatively modest band masses for both electrons and holes suggesting applications. Optical properties show a infrared-red absorption when doped. This could potentially be useful for combining wavelength filtering and transparent conducting functions. Furthermore, our defect calculations show that Ba 2TeO is intrinsically p-type conducting under Ba-poor condition. However, the spontaneousmore » formation of the donor defects may constrain the p-type transport properties and would need to be addressed to enable applications.« less

New surface smoothing technologies for manufacturing of complex shaped glass components

NASA Astrophysics Data System (ADS)

Henkel, Sebastian; Schwager, Anne-Marie; Bliedtner, Jens; Götze, Kerstin; Rädlein, Edda; Schulze, Christian; Gerhardt, Martin; Fuhr, Michael

2017-10-01

The production of complex glass components with 2.5D or 3D-structures involves great effort and the need for advanced CNC-technology. Especially the final surface treatment, for generation of transparent surfaces, represents a timeconsuming and costly process. The ultrasonic-assisted grinding procedure is used to generate arbitrary shaped components and freeform-surfaces. The special kinematic principle, containing a high-frequency tool oscillation, enables efficient manufacturing processes. Surfaces produced in this way allow for application of novel smoothing methods, providing considerable advantages compared to classic polishing. It is shown, that manufacturing of transparent glass surfaces with low roughness down to Rq = 10 nm is possible, using an ultra-fine grinding process. By adding a CO2-laser polishing process, roughness can be reduced even further with a very short polishing time.

Next generation solar cells using flexible transparent electrodes based on silver nanowires and grapheme

NASA Astrophysics Data System (ADS)

Alomairy, Sultan

Organic photovoltaic (OPV) devices have been developed extensively and optimised due to the use of nanomaterials in their construction. More recently, the demand for such devices to be flexible and mechanically robust has been a major area of research. Presently, Indium Tin Oxide (ITO) is the material that is used almost exclusively for transparent electrode. However, it has several drawbacks such as brittleness, high refractive index and high processing temperature. Furthermore, the price of ITO has been highly volatile due to scarcity of indium resources and the increased consumption of the material. Therefore, cheap, flexible and solution-processed transparent conductors are required for emerging optoelectronic devices with flexible construction which can be promising for wearable or environmentally adaptable devices purposes such as flexible solar cells and displays. Therefore, over the past decade an alternative material has been sought intensively, particularly in the need for producing large area flexible transparent electrodes. Many materials have been investigated but most investigations have focused on carbon nanotube (CNT), graphene flakes and metallic nanowires. Silver nanowires (Ag NWs) networks have been proven to show a high electrical conductivity with high optical transmittance. This special characteristic is desirable in transparent conductive electrodes in optoelectronic applications such as solar cells, light emitting diodes, and touch screen. On the other hand, Polymeric substrates that act as a non-brittle scaffold as well as protective packaging of the OPV are an essential element for such an “All-plastic” device. However, for such applications where the coating should be relatively hard a bottleneck to fabricating large area homogeneous films is associated with the formation of cracks as a result of local mismatches in mechanical properties during film formation. In this work, the fabrication and characterization of flexible transparent electrodes of Ag NWs on flexible substrates by spray deposition technique have been described. Furthermore, a way to enhance the electrical and mechanical properties of the Ag NWs transparent electrodes by incorporating a low density ensemble of graphene on top of the metal electrode networks using the Langmuir-Schafer has been achieved. Interestingly, the electrical conductivity in these hybrid electrodes is stable over relatively large strains during mechanical agitation indicating that such electrodes may have important application in future applications. Finally, producing crack-free monolayer latex over large area has been fabricated and characterised. Therefore, the polymer latex thin film has promising applications as purposes of hard coatings.

Changes in European legislation make it timely to introduce a transparent market surveillance system for cosmetics.

PubMed

Lodén, Marie; Ungerth, Louise; Serup, Jørgen

2007-01-01

Marketing of cosmetics often makes strong claims linked to active ingredients. This is especially so for anti-ageing products, where the presentation and content of "active" ingredients may create new difficulties in their classification as cosmetics or medicinal products. A recent change in European legislation classifies a product as medicinal by virtue of its "function", in addition to the previous definition of "presentation" (i.e. marketing linked to diseases). Thus, formulations that also restore, correct or modify physiological functions by exerting a pharmacological, immunological or metabolic action should henceforth be covered by the Medicinal Products Directive. A cosmetic product must be suitable for its purpose and should not lead to adverse reactions that are disproportional in relation to its intended effect. However, the forthcoming ban on animal testing of cosmetic ingredients and the new European regulation, REACH (Registration, Evaluation and Authorisation of Chemicals), which aims to ensure a high level of chemical safety to protect human health and the environment, will probably have limited impact on the safety assessment of cosmetics. In order to enable consumers to make informed purchasing decisions, greater transparency in the process of assessing the performance of cosmetics is needed. Introduction of a more transparent system, enabling consumers and professionals to examine the scientific evidence for the claimed effect and the safety assessment of cosmetics, is therefore timely. Lack of transparency increases the risk of consumers wasting money on cosmetics that do not deliver the desired effects. This may jeopardize public trust in the cosmetic industry.

The role of handouts, note-taking and overhead transparencies in veterinary science lectures.

PubMed

McLennan, M W; Isaacs, G

2002-10-01

To study student and staff views of the role and use of handouts, note-taking and overhead transparencies in veterinary science lectures at the University of Queensland The Nominal Group Technique was used to help develop a questionnaire, which was completed by 351 students (a response rate of 84%) and 35 staff (76%) from the 5 years of the veterinary course. The data were analysed using the SAS statistical computer package. Staff and students held different views as to the frequency with which handouts should be used, their educational value, and whether they should be complete or partial. Fewer students than staff agreed that handouts discourage further reading in a subject. Almost all staff and students saw the central functions of note-taking to be provision of notes for subsequent revision and encoding information given by the lecturer. More students than staff however, considered that note-taking in lectures interferes with understanding. Staff and students held similar views as to the uses of overheads in lectures. Interestingly however, more staff than students agreed that overheads often contain too much information. Both students and staff saw the central role of note-taking as providing a set of good notes for revision. Generally students preferred that this information be provided in the form of partial or complete handouts, while staff preferred students to take notes and to read outside lectures. Surprisingly, more staff than students felt that overhead transparencies often contained too much information. Note-taking, handouts and overhead transparencies need to be linked in a coherent educational strategy to promote effective learning.

Methods and apparatus for transparent display using scattering nanoparticles

DOEpatents

Hsu, Chia Wei; Qiu, Wenjun; Zhen, Bo; Shapira, Ofer; Soljacic, Marin

2017-06-14

Transparent displays enable many useful applications, including heads-up displays for cars and aircraft as well as displays on eyeglasses and glass windows. Unfortunately, transparent displays made of organic light-emitting diodes are typically expensive and opaque. Heads-up displays often require fixed light sources and have limited viewing angles. And transparent displays that use frequency conversion are typically energy inefficient. Conversely, the present transparent displays operate by scattering visible light from resonant nanoparticles with narrowband scattering cross sections and small absorption cross sections. More specifically, projecting an image onto a transparent screen doped with nanoparticles that selectively scatter light at the image wavelength(s) yields an image on the screen visible to an observer. Because the nanoparticles scatter light at only certain wavelengths, the screen is practically transparent under ambient light. Exemplary transparent scattering displays can be simple, inexpensive, scalable to large sizes, viewable over wide angular ranges, energy efficient, and transparent simultaneously.

Improved thermal oxidation stability of solution-processable silver nanowire transparent electrode by reduced graphene oxide.

PubMed

Ahn, Yumi; Jeong, Youngjun; Lee, Youngu

2012-12-01

Solution-processable silver nanowire-reduced graphene oxide (AgNW-rGO) hybrid transparent electrode was prepared in order to replace conventional ITO transparent electrode. AgNW-rGO hybrid transparent electrode exhibited high optical transmittance and low sheet resistance, which is comparable to ITO transparent electrode. In addition, it was found that AgNW-rGO hybrid transparent electrode exhibited highly enhanced thermal oxidation and chemical stabilities due to excellent gas-barrier property of rGO passivation layer onto AgNW film. Furthermore, the organic solar cells with AgNW-rGO hybrid transparent electrode showed good photovoltaic behavior as much as solar cells with AgNW transparent electrode. It is expected that AgNW-rGO hybrid transparent electrode can be used as a key component in various optoelectronic application such as display panels, touch screen panels, and solar cells.

Methods and apparatus for transparent display using scattering nanoparticles

DOEpatents

Hsu, Chia Wei; Qiu, Wenjun; Zhen, Bo; Shapira, Ofer; Soljacic, Marin

2016-05-10

Transparent displays enable many useful applications, including heads-up displays for cars and aircraft as well as displays on eyeglasses and glass windows. Unfortunately, transparent displays made of organic light-emitting diodes are typically expensive and opaque. Heads-up displays often require fixed light sources and have limited viewing angles. And transparent displays that use frequency conversion are typically energy inefficient. Conversely, the present transparent displays operate by scattering visible light from resonant nanoparticles with narrowband scattering cross sections and small absorption cross sections. More specifically, projecting an image onto a transparent screen doped with nanoparticles that selectively scatter light at the image wavelength(s) yields an image on the screen visible to an observer. Because the nanoparticles scatter light at only certain wavelengths, the screen is practically transparent under ambient light. Exemplary transparent scattering displays can be simple, inexpensive, scalable to large sizes, viewable over wide angular ranges, energy efficient, and transparent simultaneously.

[Inequalities in access to care in Africa].

PubMed

Livinec, Bertrand; Milleliri, Jean-Marie; Rey, Jean-Loup; Saliou, Pierre

2013-05-01

Social inequalities in health are increasingly in the news in Africa. While appeals, international declarations and new strategies for health in Africa have succeeded one another over the years, we must admit that the health inequalities are increasing. It is perhaps time to take health out of its compartment and understand that it is one of the components of overall development and that we cannot act effectively against these health inequalities unless we also act on the pressing need to see all States (in the North and South) finally meet their financial commitments, demand of African leaders that they provide good government and fight against corruption, the leaders of African good government and a fight against corruption, and finally ensure that the strategies proposed in Africa focus on the health priorities of each country. If we mention the Scandinavian example, we must admit that the Nordic countries have demonstrated their capacity to obtain excellent results in health, to narrow social inequalities, and provide public transparency and aid to development. They constitute today an excellent example for most Western countries and for African countries - and also for African and western civil societies, which can be inspired by the concrete measures of transparency and strong public activity, which promote improvement in the overall statistics of their societies, in particular, in health. Accordingly we propose a new approach that looks at health statistics in the light of inequalities (especially via the Gini coefficient) and public transparency (especially via the benchmarks of perceived corruption). A New Deal for health in Africa is needed, and all the organization involved should be asked to act together for a holistic public health vision that will benefit the populations of Africa. Health cannot be separated from a political, ethical and equitable vision of society.

Perspective: a culture of respect, part 2: creating a culture of respect.

PubMed

Leape, Lucian L; Shore, Miles F; Dienstag, Jules L; Mayer, Robert J; Edgman-Levitan, Susan; Meyer, Gregg S; Healy, Gerald B

2012-07-01

Creating a culture of respect is the essential first step in a health care organization's journey to becoming a safe, high-reliability organization that provides a supportive and nurturing environment and a workplace that enables staff to engage wholeheartedly in their work. A culture of respect requires that the institution develop effective methods for responding to episodes of disrespectful behavior while also initiating the cultural changes needed to prevent such episodes from occurring. Both responding to and preventing disrespect are major challenges for the organization's leader, who must create the preconditions for change, lead in establishing and enforcing policies, enable frontline worker engagement, and facilitate the creation of a safe learning environment.When disrespectful behavior occurs, it must be addressed consistently and transparently. Central to an effective response is a code of conduct that establishes unequivocally the expectation that everyone is entitled to be treated with courtesy, honesty, respect, and dignity. The code must be enforced fairly through a clear and explicit process and applied consistently regardless of rank or station.Creating a culture of respect requires action on many fronts: modeling respectful conduct; educating students, physicians, and nonphysicians on appropriate behavior; conducting performance evaluations to identify those in need of help; providing counseling and training when needed; and supporting frontline changes that increase the sense of fairness, transparency, collaboration, and individual responsibility.

Transparency in a Pediatric Quality Improvement Collaborative: A Passionate Journey by NPC-QIC Clinicians and Parents.

PubMed

Lihn, Stacey L; Kugler, John D; Peterson, Laura E; Lannon, Carole M; Pickles, Diane; Beekman, Robert H

2015-01-01

Transparency-sharing data or information about outcomes, processes, protocols, and practices-may be the most powerful driver of health care improvement. In this special article, the development and growth of transparency within the National Pediatric Cardiology Quality Improvement Collaborative is described. The National Pediatric Cardiology Quality Improvement Collaborative transparency journey is guided by equal numbers of clinicians and parents of children with congenital heart disease working together in a Transparency Work Group. Activities are organized around four interrelated levels of transparency (individual, organizational, collaborative, and system), each with a specified purpose and aim. A number of Transparency Work Group recommendations have been operationalized. Aggregate collaborative performance is now reported on the public-facing web site. Specific information that the Transparency Work Group recommends centers provide to parents has been developed and published. Almost half of National Pediatric Cardiology Quality Improvement Collaborative centers participated in a pilot of transparently sharing their outcomes achieved with one another. Individual centers have also begun successfully implementing recommended transparency activities. Despite progress, barriers to full transparency persist, including health care organization concerns about potential negative effects of disclosure on reputation and finances, and lack of reliable definitions, data, and reporting standards for fair comparisons of centers. The National Pediatric Cardiology Quality Improvement Collaborative's transparency efforts have been a journey that continues, not a single goal or destination. Balanced participation of clinicians and parents has been a critical element of the collaborative's success on this issue. Plans are in place to guide implementation of additional transparency recommendations across all four levels, including extension of the activities beyond the collaborative to support transparency efforts in national cardiology and cardiac surgery societies. © 2015 Wiley Periodicals, Inc.

What is and what is not electromagnetically induced transparency in whispering-gallery microcavities.

PubMed

Peng, Bo; Özdemir, Sahin Kaya; Chen, Weijian; Nori, Franco; Yang, Lan

2014-10-24

There has been an increasing interest in all-optical analogues of electromagnetically induced transparency and Autler-Townes splitting. Despite the differences in their underlying physics, both electromagnetically induced transparency and Autler-Townes splitting are quantified by a transparency window in the absorption or transmission spectrum, which often leads to a confusion about its origin. While the transparency window in electromagnetically induced transparency is a result of Fano interference among different transition pathways, in Autler-Townes splitting it is the result of strong field-driven interactions leading to the splitting of energy levels. Being able to tell objectively whether an observed transparency window is because of electromagnetically induced transparency or Autler-Townes splitting is crucial for applications and for clarifying the physics involved. Here we demonstrate the pathways leading to electromagnetically induced transparency, Fano resonances and Autler-Townes splitting in coupled whispering-gallery-mode resonators. Moreover, we report the application of the Akaike Information Criterion discerning between all-optical analogues of electromagnetically induced transparency and Autler-Townes splitting and clarifying the transition between them.

Method for Improving Acoustic Impedance of Epoxy Resins

DTIC Science & Technology

2010-06-11

neoprene, ethylene propylene diene monomer ( EPDM ) and polyurethane rubbers . Typical applications of these materials encapsulate and protect acoustic...different material (e.g., rubber ) cannot be used. Thus, a hard, strong and acoustically transparent material is needed. Suitable high modulus...epoxy resin. In this method, an epoxy resin component is mixed with a rubber component. The epoxy resin component is preferably a bisphenol A

The Role of Student Learning Outcomes for Institutional Accountability and Transparency. Pathways to College Network Brief

ERIC Educational Resources Information Center

Pathways to College Network, 2012

2012-01-01

The national focus on college completion has prompted a number of ambitious education goals, numerous research- and practice-based initiatives, and a spotlight on the need to continually improve higher education access and success. This national dialogue has raised not only public and political will for postsecondary completion, but also a number…

Defense Technology Plan

DTIC Science & Technology

1994-09-01

implementation of the services necessary to support transparent "information pull " operation of decision support systems. This infrastructure will be implemented...technology. Some aspects of this area such as user- pull , mobile and highly distributed operation, bandwidth needs and degree of securihy are Dol)-driven...by a variety of statutory requirements. R&D will provide enhanced mission effectiveness and maintenance of fragile ecosystems. The goalis to develop

Resident Choice and the Survey Process: The Need for Standardized Observation and Transparency

ERIC Educational Resources Information Center

Schnelle, John F.; Bertrand, Rosanna; Hurd, Donna; White, Alan; Squires, David; Feuerberg, Marvin; Hickey, Kelly; Simmons, Sandra F.

2009-01-01

Purpose: To describe a standardized observation protocol to determine if nursing home (NH) staff offer choice to residents during 3 morning activities of daily living (ADL) and compare the observational data with deficiency statements cited by state survey staff. Design and Methods: Morning ADL care was observed in 20 NHs in 5 states by research…

Missile Defense: Actions Needed to Improve Transparency and Accountability

DTIC Science & Technology

2011-04-13

suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway...Established resource, schedule, test, operational capacity, technical, and contract baselines for several missile defense systems. It reported...Europe as well as the Ground-based Midcourse Defense system. View GAO-11-555T or key components. For more information, contact Cristina T

Global Higher Education in Need of More and Better Learning Metrics. Why OECD's AHELO Project Might Help to Fill the Gap

ERIC Educational Resources Information Center

Van Damme, Dirk

2015-01-01

In this paper, I argue for more and better learning metrics in higher education, eventually through an international, comparative assessment of students' learning outcomes. Better learning measures may help to improve transparency in the system by addressing the information asymmetry problem. If not addressed adequately, the lack of transparency…

Defense Small Business Innovation Research Program (SBIR) FY 1985.

DTIC Science & Technology

1985-01-31

EO)/ INFRARED (IR) COUNTERMEASURES W CATEGORY: Exploratory Development DESCRIPTION: Analysis needs to be performed to determine how to counter weapon...MHz to 2 GHz. Electrically conducting surfaces of interest are cable shields and braids, and optically transparent (to visible and infrared ) screens...conjunction with a particular method of low temperature depositions from organometallics. 37 .. . -. . . . . . -67 - . ... . 43. TITLE: TUNABLE INFRARED LASER

Unmasking Hidden Costs: Best Practices for Public Pension Transparency. Civic Report. No. 63

ERIC Educational Resources Information Center

Barro, Josh

2011-01-01

In 2010, the pension plans of state and local governments came under increased scrutiny in response to their generally weak financial positions and mounting costs to taxpayers. By some measures, these funds are as much as $3 trillion short of the assets they would need to cover the promises they have made to government workers and retirees.…

Building an Institute for Triple Helix Research Innovation in the Pacific Region. Revision

DTIC Science & Technology

2008-10-01

multidisciplinary collaboration towards developing cost- effective and sustainable eHealth technologies and applications. The results of the...transparency, efficiency in sharing resources through eHealth , and leveraging skills needed to facilitate and expedite interdisciplinary collaboration and...innovation, especially in the eHealth and healthcare fields. To achieve the stated objectives, the Institute’s five initiatives were specifically

Fabricating waveguide Bragg gratings (WBGs) in bulk materials using ultrashort laser pulses

NASA Astrophysics Data System (ADS)

Ams, Martin; Dekker, Peter; Gross, Simon; Withford, Michael J.

2017-01-01

Optical waveguide Bragg gratings (WBGs) can be created in transparent materials using femtosecond laser pulses. The technique is conducted without the need for lithography, ion-beam fabrication methods, or clean room facilities. This paper reviews the field of ultrafast laser-inscribed WBGs since its inception, with a particular focus on fabrication techniques, WBG characteristics, WBG types, and WBG applications.

Transparency on College and Career Readiness: How Does Your State Measure Up?

ERIC Educational Resources Information Center

Boyd, Sandra

2017-01-01

Over the past two decades, college and career readiness became a priority in K-12 education. While graduation rates have been rising, far too many high school graduates are not ready to succeed in college or a job. Employers note that freshly-minted employees too often need additional training to perform their roles, many are ineligible for…

Implementation of a Tool to Enhance Evidence-Informed Decision Making in Public Health: Identifying Barriers and Facilitating Factors

ERIC Educational Resources Information Center

van der Heide, Iris; van der Noordt, Maaike; Proper, Karin I.; Schoemaker, Casper; van den Berg, Matthijs; Hamberg-van Reenen, Heleen H.

2016-01-01

One of the barriers regarding evidence-informed decision making is the gap between the needs of policy makers and the ways researchers present evidence. This pilot study evaluates the barriers and facilitators to the implementation of a tool to enhance transparent and unambiguous communication on scientific evidence by knowledge workers.…

Funding Decisions for Newborn Screening: A Comparative Review of 22 Decision Processes in Europe

PubMed Central

Fischer, Katharina Elisabeth; Rogowski, Wolf Henning

2014-01-01

Decision-makers need to make choices to improve public health. Population-based newborn screening (NBS) is considered as one strategy to prevent adverse health outcomes and address rare disease patients’ needs. The aim of this study was to describe key characteristics of decisions for funding new NBS programmes in Europe. We analysed past decisions using a conceptual framework. It incorporates indicators that capture the steps of decision processes by health care payers. Based on an internet survey, we compared 22 decisions for which answers among two respondents were validated for each observation. The frequencies of indicators were calculated to elicit key characteristics. All decisions resulted in positive, mostly unrestricted funding. Stakeholder participation was diverse focusing on information provision or voting. Often, decisions were not fully transparent. Assessment of NBS technologies concentrated on expert opinion, literature review and rough cost estimates. Most important appraisal criteria were effectiveness (i.e., health gain from testing for the children being screened), disease severity and availability of treatments. Some common and diverging key characteristics were identified. Although no evidence of explicit healthcare rationing was found, processes may be improved in respect of transparency and scientific rigour of assessment. PMID:24852389

Transparent 'solution' of ultrathin magnesium hydroxide nanocrystals for flexible and transparent nanocomposite films.

PubMed

Wang, Jie-Xin; Sun, Qian; Chen, Bo; Wu, Xi; Zeng, Xiao-Fei; Zhang, Cong; Zou, Hai-Kui; Chen, Jian-Feng

2015-05-15

Transparent solutions of nanocrystals exhibit many unique properties, and are thus attractive materials for numerous applications. However, the synthesis of transparent nanocrystal solutions of magnesium hydroxide (MH) with wide applications is yet to be realized. Here, we report a facile two-step process, which includes a direct reactive precipitation in alcohol phase instead of aqueous phase combined with a successive surface modification, to prepare transparent alcohol solutions containing lamellar MH nanocrystals with an average size of 52 nm and an ultrathin thickness of 1-2 nm, which is the thinnest MH nanoplatelet reported in the literatures. Further, highly flexible and transparent nanocomposite films are fabricated with a solution mixing method by adding the transparent MH nanocrystal solutions into PVB solution. Considering the simplicity of the fabrication process, high transparency and good flexibility, this MH/polymer nanocomposite film is promising for flame-resistant applications in plastic electronics and optical devices with high transparency, such as flexible displays, optical filters, and flexible solar cells.

Flexible Transparent Supercapacitors Based on Hierarchical Nanocomposite Films.

PubMed

Chen, Fanhong; Wan, Pengbo; Xu, Haijun; Sun, Xiaoming

2017-05-31

Flexible transparent electronic devices have recently gained immense popularity in smart wearable electronics and touch screen devices, which accelerates the development of the portable power sources with reliable flexibility, robust transparency and integration to couple these electronic devices. For potentially coupled as energy storage modules in various flexible, transparent and portable electronics, the flexible transparent supercapacitors are developed and assembled from hierarchical nanocomposite films of reduced graphene oxide (rGO) and aligned polyaniline (PANI) nanoarrays upon their synergistic advantages. The nanocomposite films are fabricated from in situ PANI nanoarrays preparation in a blended solution of aniline monomers and rGO onto the flexible, transparent, and stably conducting film (FTCF) substrate, which is obtained by coating silver nanowires (Ag NWs) layer with Meyer rod and then coating of rGO layer on polyethylene terephthalate (PET) substrate. Optimization of the transparency, the specific capacitance, and the flexibility resulted in the obtained all-solid state nanocomposite supercapacitors exhibiting enhanced capacitance performance, good cycling stability, excellent flexibility, and superior transparency. It provides promising application prospects for exploiting flexible, low-cost, transparent, and high-performance energy storage devices to be coupled into various flexible, transparent, and wearable electronic devices.

Developing New TCOs for Renewable Applications

NASA Astrophysics Data System (ADS)

Ginley, David

2013-03-01

Transparent conducting oxides are enabling for a broad range of optoelectronic technologies. Not only are conductivity and transparency critical but many other factors are critical including: carrier type, processing conditions, work function, chemical stability, and interface properties. The historical set of materials cannot meet all these needs. This has driven a renaissance in new materials development and approaches to transparent contacts. We will discuss these new developments in general and in the context of photovoltaics specifically. We will present results on new materials and also the development bilayer structrues that enable charge selective contacts. Materials set includes amorphous materials for hybrid solar cells like InZnO and ZnSnO, it includes Nb and Ta doped TiO2 as a high refractive index TCO and it includes the use of thin n- and p-type oxides as electron and hole selective contacts such as has been demonstrated for organic photovotaics. This work is supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, under Contract No. DE-AC36-08GO28308 to NREL as a part of the DOE Energy Frontier Research Center ``Center for Inverse Design'' and through the US Department of Energy under Contract no. DOE-AC36-08GO28308 through the National Center for Photovoltaics.

[Transparency of medical quality data. Ethical obligation to deliver or instrument to create unfair competitive advantage?].

PubMed

Ennker, J; Albert, A; Thanner, M; Nagel, E; Rosendahl, U; Ennker, I

2009-10-01

Annually about 100,000 acute cardiac deaths occur in Germany. For this reason, there is the obvious need, from a public health perspective, to inform the population about possible measures of their prevention and treatment. Ultimately every patient or admission referring doctor can be thought of as a recipient of "marketing". Other than within the context of economics, in medicine the subject of marketing is likely to produce a negative response. Any doctor engaging in marketing is quickly considered to be engaging in unfair competition at the expense of colleagues ("economic competitors"). However, despite some reservations it would seem sensible to provide transparency concerning the results of treatment. If the manner of competition is the right one, i.e. one that has as its aim to improve patient care, it can at the same time improve such care, motivate doctors and frequently also reduce costs. Transparency of the various aspects of improved medical care in this way represent a "pay-back" to everyone working in the health services. It is desirable to establish an external process of assessing any published data and, as far as possible, exclude all incorrect data from relevant measures of comparison. Competition can then be to the patient's benefit.

Finding Resolution for the Responsible Transparency of Economic Models in Health and Medicine.

PubMed

Padula, William V; McQueen, Robert Brett; Pronovost, Peter J

2017-11-01

The Second Panel on Cost-Effectiveness in Health and Medicine recommendations for conduct, methodological practices, and reporting of cost-effectiveness analyses has a number of questions unanswered with respect to the implementation of transparent, open source code interface for economic models. The possibility of making economic model source code could be positive and progressive for the field; however, several unintended consequences of this system should be first considered before complete implementation of this model. First, there is the concern regarding intellectual property rights that modelers have to their analyses. Second, the open source code could make analyses more accessible to inexperienced modelers, leading to inaccurate or misinterpreted results. We propose several resolutions to these concerns. The field should establish a licensing system of open source code such that the model originators maintain control of the code use and grant permissions to other investigators who wish to use it. The field should also be more forthcoming towards the teaching of cost-effectiveness analysis in medical and health services education so that providers and other professionals are familiar with economic modeling and able to conduct analyses with open source code. These types of unintended consequences need to be fully considered before the field's preparedness to move forward into an era of model transparency with open source code.

Verification of a Proposed Clinical Electroacoustic Test Protocol for Personal Digital Modulation Receivers Coupled to Cochlear Implant Sound Processors.

PubMed

Nair, Erika L; Sousa, Rhonda; Wannagot, Shannon

Guidelines established by the AAA currently recommend behavioral testing when fitting frequency modulated (FM) systems to individuals with cochlear implants (CIs). A protocol for completing electroacoustic measures has not yet been validated for personal FM systems or digital modulation (DM) systems coupled to CI sound processors. In response, some professionals have used or altered the AAA electroacoustic verification steps for fitting FM systems to hearing aids when fitting FM systems to CI sound processors. More recently steps were outlined in a proposed protocol. The purpose of this research is to review and compare the electroacoustic test measures outlined in a 2013 article by Schafer and colleagues in the Journal of the American Academy of Audiology titled "A Proposed Electroacoustic Test Protocol for Personal FM Receivers Coupled to Cochlear Implant Sound Processors" to the AAA electroacoustic verification steps for fitting FM systems to hearing aids when fitting DM systems to CI users. Electroacoustic measures were conducted on 71 CI sound processors and Phonak Roger DM systems using a proposed protocol and an adapted AAA protocol. Phonak's recommended default receiver gain setting was used for each CI sound processor manufacturer and adjusted if necessary to achieve transparency. Electroacoustic measures were conducted on Cochlear and Advanced Bionics (AB) sound processors. In this study, 28 Cochlear Nucleus 5/CP810 sound processors, 26 Cochlear Nucleus 6/CP910 sound processors, and 17 AB Naida CI Q70 sound processors were coupled in various combinations to Phonak Roger DM dedicated receivers (25 Phonak Roger 14 receivers-Cochlear dedicated receiver-and 9 Phonak Roger 17 receivers-AB dedicated receiver) and 20 Phonak Roger Inspiro transmitters. Employing both the AAA and the Schafer et al protocols, electroacoustic measurements were conducted with the Audioscan Verifit in a clinical setting on 71 CI sound processors and Phonak Roger DM systems to determine transparency and verify FM advantage, comparing speech inputs (65 dB SPL) in an effort to achieve equal outputs. If transparency was not achieved at Phonak's recommended default receiver gain, adjustments were made to the receiver gain. The integrity of the signal was monitored with the appropriate manufacturer's monitor earphones. Using the AAA hearing aid protocol, 50 of the 71 CI sound processors achieved transparency, and 59 of the 71 CI sound processors achieved transparency when using the proposed protocol at Phonak's recommended default receiver gain. After the receiver gain was adjusted, 3 of 21 CI sound processors still did not meet transparency using the AAA protocol, and 2 of 12 CI sound processors still did not meet transparency using the Schafer et al proposed protocol. Both protocols were shown to be effective in taking reliable electroacoustic measurements and demonstrate transparency. Both protocols are felt to be clinically feasible and to address the needs of populations that are unable to reliably report regarding the integrity of their personal DM systems. American Academy of Audiology

Transparent Conductive Nanofiber Paper for Foldable Solar Cells

PubMed Central

Nogi, Masaya; Karakawa, Makoto; Komoda, Natsuki; Yagyu, Hitomi; Nge, Thi Thi

2015-01-01

Optically transparent nanofiber paper containing silver nanowires showed high electrical conductivity and maintained the high transparency, and low weight of the original transparent nanofiber paper. We demonstrated some procedures of optically transparent and electrically conductive cellulose nanofiber paper for lightweight and portable electronic devices. The nanofiber paper enhanced high conductivity without any post treatments such as heating or mechanical pressing, when cellulose nanofiber dispersions were dropped on a silver nanowire thin layer. The transparent conductive nanofiber paper showed high electrical durability in repeated folding tests, due to dual advantages of the hydrophilic affinity between cellulose and silver nanowires, and the entanglement between cellulose nanofibers and silver nanowires. Their optical transparency and electrical conductivity were as high as those of ITO glass. Therefore, using this conductive transparent paper, organic solar cells were produced that achieved a power conversion of 3.2%, which was as high as that of ITO-based solar cells. PMID:26607742

Interplay between transparency and efficiency in dye sensitized solar cells.

PubMed

Tagliaferro, Roberto; Colonna, Daniele; Brown, Thomas M; Reale, Andrea; Di Carlo, Aldo

2013-02-11

In this paper we analyze the interplay between transparency and efficiency in dye sensitized solar cells by varying fabrication parameters such as the thickness of the nano-crystalline TiO(2) layer, the dye loading and the dye type. Both transparency and efficiency show a saturation trend when plotted versus dye loading. By introducing the transparency-efficiency plot, we show that the relation between transparency and efficiency is linear and is almost independent on the TiO(2) thickness for a certain thickness range. On the contrary, the relation between transparency and efficiency depends strongly on the type of the dye. Moreover, we show that co-sensitization techniques can be effectively used to access regions of the transparency-efficiency space that are forbidden for single dye sensitization. The relation found between transparency and efficiency (T&E) can be the general guide for optimization of Dye Solar Cells in building integration applications.

Highly transparent and flexible circuits through patterning silver nanowires into microfluidic channels.

PubMed

Sun, Jing; Zhou, Wenhui; Yang, Haibo; Zhen, Xue; Ma, Longfei; Williams, Dirk; Sun, Xudong; Lang, Ming-Fei

2018-05-10

The development of flexible and transparent devices requires completely transparent and flexible circuits (TFCs). To overcome the disadvantages of the previously reported TFCs that are partially transparent, lacking pattern control, or labor consuming, we achieve true TFCs via a facile process with precise pattern control, exhibiting concurrent high transparency, conductivity, flexibility, stretchability, and robustness. A highly transparent and flexible conductive film is first made through spin coating silver nanowires (AgNWs) onto polydimethylsiloxane (PDMS), and demonstrates simultaneous high transparency (90.86%) and low sheet resistance (3.22 Ω sq-1). Taking advantage of microfluidic technology, circuits with ultraprecise and complex patterns from the microscale to milliscale are obtained through spin coating of AgNWs into microfluidic channels on PDMS. Without elaborate processing, this method may be suitable for mass production, which would contribute enormously to potential applications in wearable medical equipment and transparent electronic devices.

Second-order nonlinearity induced transparency.

PubMed

Zhou, Y H; Zhang, S S; Shen, H Z; Yi, X X

2017-04-01

In analogy to electromagnetically induced transparency, optomechanically induced transparency was proposed recently in [Science330, 1520 (2010)SCIEAS0036-807510.1126/science.1195596]. In this Letter, we demonstrate another form of induced transparency enabled by second-order nonlinearity. A practical application of the second-order nonlinearity induced transparency is to measure the second-order nonlinear coefficient. Our scheme might find applications in quantum optics and quantum information processing.

The Value of Transparency in Distributed Solar PV Markets | Solar Research

Science.gov Websites

| NREL The Value of Transparency in Distributed Solar PV Markets The Value of Transparency in Distributed Solar PV Markets NREL research analyzes data from a U.S. quote aggregator to study the effects of transparency on distributed solar photovoltaic (PV) markets. The study shows lower prices in more transparent

Stress Wave and Damage Propagation in Transparent Laminates at Elevated Temperatures

DTIC Science & Technology

2010-03-01

materials like Starphire (a registered trademark of PPG Industries, Pittsburgh, PA) soda - lime glass , borosilicate glass , fused silica , and the...in transparent armor materials like Starphire soda - lime glass , borosilicate glass , fused silica , and the transparent ceramic AlON.1 Since...transparent ceramic AlON. Since transparent armor consists of glass laminates with polymer interlayer and backing, the influence of interlayer type and

Recognition and Transparency of Vocational Qualifications; The Way Forward. Discussion Paper = Anerkennung und Transparenz von beruflichen Befahigungsnachweisen; Neue Wege. Diskussionspapier = Reconnaissance et transparence des qualifications professionelles; La voie a suivre. Document de discussion. CEDEFOP Panorama.

ERIC Educational Resources Information Center

Bjornavold, Jens; Sellin, Burkart

The European Union's most important challenge is to establish permanent, reliable methodologies and systems that support transparency and recognition of vocational qualifications. The concept of "transparency of qualifications" has replaced "recognition" and "comparability.""Transparency" points to the need…

Laser patterning of transparent polymers assisted by plasmon excitation.

PubMed

Elashnikov, R; Trelin, A; Otta, J; Fitl, P; Mares, D; Jerabek, V; Svorcik, V; Lyutakov, O

2018-06-13

Plasmon-assisted lithography of thin transparent polymer films, based on polymer mass-redistribution under plasmon excitation, is presented. The plasmon-supported structures were prepared by thermal annealing of thin Ag films sputtered on glass or glass/graphene substrates. Thin films of polymethylmethacrylate, polystyrene and polylactic acid were then spin-coated on the created plasmon-supported structures. Subsequent laser beam writing, at the wavelength corresponding to the position of plasmon absorption, leads to mass redistribution and patterning of the thin polymer films. The prepared structures were characterized using UV-Vis spectroscopy and confocal and AFM microscopy. The shape of the prepared structures was found to be strongly dependent on the substrate type. The mechanism leading to polymer patterning was examined and attributed to the plasmon-heating. The proposed method makes it possible to create different patterns in polymer films without the need for wet technological stages, powerful light sources or a change in the polymer optical properties.

Science for the Public Good: Tackling scientific integrity in the federal government

NASA Astrophysics Data System (ADS)

Goldman, G. T.; Halpern, M.; Johnson, C.

2016-12-01

From hydraulic fracturing to climate change to seismic risk, government science and scientists are integral to public decision making in the geosciences. Following calls for increased scientific integrity across the government, policies have been put in place in recent years to be promote transparency and appropriate use of science in government decision making. But how effective have these initiatives been? With the development of scientific integrity policies, new transparency measures, and other efforts in recent years, are we seeing improvements in how federal agencies use science? And importantly, can these safeguards prevent potential future breaches of scientific integrity and misuse science for political gain? Review of recent progress and problems around government scientific integrity, including case studies, policy assessments, and surveys of federal scientists, can shed light on how far the we have come and what areas still need improvement to ensure that government scientific integrity is preserved in the future.

Secure and Trustable Electronic Medical Records Sharing using Blockchain.

PubMed

Dubovitskaya, Alevtina; Xu, Zhigang; Ryu, Samuel; Schumacher, Michael; Wang, Fusheng

2017-01-01

Electronic medical records (EMRs) are critical, highly sensitive private information in healthcare, and need to be frequently shared among peers. Blockchain provides a shared, immutable and transparent history of all the transactions to build applications with trust, accountability and transparency. This provides a unique opportunity to develop a secure and trustable EMR data management and sharing system using blockchain. In this paper, we present our perspectives on blockchain based healthcare data management, in particular, for EMR data sharing between healthcare providers and for research studies. We propose a framework on managing and sharing EMR data for cancer patient care. In collaboration with Stony Brook University Hospital, we implemented our framework in a prototype that ensures privacy, security, availability, and fine-grained access control over EMR data. The proposed work can significantly reduce the turnaround time for EMR sharing, improve decision making for medical care, and reduce the overall cost.

Secure and Trustable Electronic Medical Records Sharing using Blockchain

PubMed Central

Dubovitskaya, Alevtina; Xu, Zhigang; Ryu, Samuel; Schumacher, Michael; Wang, Fusheng

2017-01-01

Electronic medical records (EMRs) are critical, highly sensitive private information in healthcare, and need to be frequently shared among peers. Blockchain provides a shared, immutable and transparent history of all the transactions to build applications with trust, accountability and transparency. This provides a unique opportunity to develop a secure and trustable EMR data management and sharing system using blockchain. In this paper, we present our perspectives on blockchain based healthcare data management, in particular, for EMR data sharing between healthcare providers and for research studies. We propose a framework on managing and sharing EMR data for cancer patient care. In collaboration with Stony Brook University Hospital, we implemented our framework in a prototype that ensures privacy, security, availability, and fine-grained access control over EMR data. The proposed work can significantly reduce the turnaround time for EMR sharing, improve decision making for medical care, and reduce the overall cost. PMID:29854130

Increased Transparency and Consumer Protections for 2016 Marketplace Plans.

PubMed

Brooks-LaSure, Chiquita

2015-12-01

The open enrollment period that ends in December 2015 for coverage begin­ning January 2016 marks the third year of the health care exchanges or marketplaces and of coverage through new qualified health plans. This issue brief investigates several key changes to the qualified health plans, with a focus on increased transparency and consumer protections. A new out-of-pocket costs calculator, requirements regarding provider networks, and prescription drug cost-sharing requirements should serve to better inform and improve consumer selection. In addition, several policy changes will help individuals with more severe health needs. These include: improved prescription drug coverage for HIV/ AIDS and other conditions, allowing prescription drugs that are obtained through the "exceptions" process to count toward the out-of-pocket spending cap, more comprehensive and consistent habilitative coverage, and an individual out-of-pocket spending cap within the family out-of-pocket maximum.

Good modeling practice guidelines for applying multimedia models in chemical assessments.

PubMed

Buser, Andreas M; MacLeod, Matthew; Scheringer, Martin; Mackay, Don; Bonnell, Mark; Russell, Mark H; DePinto, Joseph V; Hungerbühler, Konrad

2012-10-01

Multimedia mass balance models of chemical fate in the environment have been used for over 3 decades in a regulatory context to assist decision making. As these models become more comprehensive, reliable, and accepted, there is a need to recognize and adopt principles of Good Modeling Practice (GMP) to ensure that multimedia models are applied with transparency and adherence to accepted scientific principles. We propose and discuss 6 principles of GMP for applying existing multimedia models in a decision-making context, namely 1) specification of the goals of the model assessment, 2) specification of the model used, 3) specification of the input data, 4) specification of the output data, 5) conduct of a sensitivity and possibly also uncertainty analysis, and finally 6) specification of the limitations and limits of applicability of the analysis. These principles are justified and discussed with a view to enhancing the transparency and quality of model-based assessments. Copyright © 2012 SETAC.

Transparency and Documentation in Simulations of Infectious Disease Outbreaks: Towards Evidence-Based Public Health Decisions and Communications

NASA Astrophysics Data System (ADS)

Ekberg, Joakim; Timpka, Toomas; Morin, Magnus; Jenvald, Johan; Nyce, James M.; Gursky, Elin A.; Eriksson, Henrik

Computer simulations have emerged as important tools in the preparation for outbreaks of infectious disease. To support the collaborative planning and responding to the outbreaks, reports from simulations need to be transparent (accessible) with regard to the underlying parametric settings. This paper presents a design for generation of simulation reports where the background settings used in the simulation models are automatically visualized. We extended the ontology-management system Protégé to tag different settings into categories, and included these in report generation in parallel to the simulation outcomes. The report generator takes advantage of an XSLT specification and collects the documentation of the particular simulation settings into abridged XMLs including also summarized results. We conclude that even though inclusion of critical background settings in reports may not increase the accuracy of infectious disease simulations, it can prevent misunderstandings and less than optimal public health decisions.

Concentration of solar radiation by white painted transparent plates.

PubMed

Smestad, G; Hamill, P

1982-04-01

A simple flat-plate solar concentrator is described in this paper. The device is composed of a white painted transparent plate with a photovoltaic cell fixed to an unpainted area on the bottom of the plate. Light scattering off the white material is either lost or directed to the solar cell. Experimental concentrations of up to 1.9 times the incident solar flux have been achieved using white clays. These values are close to those predicted by theory for the experimental parameters investigated. A theory of the device operation is developed. Using this theory suggestions are made for optimizing the concentrator system. For reasonable choices of cell and plate size and reflectivities of 80% concentrations of over 2x are possible. The concentrator has the advantage over other systems in that the concentration is independent of incidence angle and the concentrator is easy to produce. The device needs no tracking system and will concentrate on a cloudy day.

Mapping adaptation opportunities and activities in an interactive atlas.

PubMed

Morris, Daniel F; Krishnan, Nisha

2012-01-01

The need for transparency is taking more prominence in international climate negotiations as developed countries pledge large sums of money to foster adaptation efforts in developing countries. Tools that provide accurate and up-to-date spatial information that can be easily used and vetted by local practitioners may provide effective and affordable ways to improve transparency. The Global Adaptation Atlas is such a tool, combining vetted, publicly available climate impact data with timely maps of on the ground adaptation projects to highlight confluences of effects of climate change with actions taken to address those effects. Here, we describe the structure and general functions of the Global Adaptation Atlas and explain how it may be utilized to track short-term investments in adaptation. Over longer time scales, it may also help gauge the effectiveness of specific adaptation investments as well as reveal how different climate impacts affect long-term investment in differing regions.

Fabrication and stability investigation of ultra-thin transparent and flexible Cu-Ag-Au tri-layer film on PET

NASA Astrophysics Data System (ADS)

Prakasarao, Ch Surya; D'souza, Slavia Deeksha; Hazarika, Pratim; Karthiselva N., S.; Ramesh Babu, R.; Kovendhan, M.; Kumar, R. Arockia; Joseph, D. Paul

2018-04-01

The need for transparent conducting electrodes with high transmittance, low sheet resistance and flexibility to replace Indium Tin Oxide is ever growing. We have deposited and studied the performance of ultra-thin Cu-Ag-Au tri-layer films over a flexible poly-ethylene terephthalate substrate. Scotch tape test showed good adhesion of the metallic film. Transmittance of the tri-layer was around 40 % in visible region. Optical profiler measurements were done to study the surface features. The XRD pattern revealed that film was amorphous. Sheet resistance measured by four probe technique was around 7.7 Ohm/Δ and was stable up to 423 K. The transport parameters by Hall effect showed high conductivity and carrier concentration with a mobility of 5.58 cm2/Vs. Tests performed in an indigenously designed bending unit indicated the films to be stable both mechanically and electrically even after 50,000 bending cycles.

The death of the Job plot, transparency, open science and online tools, uncertainty estimation methods and other developments in supramolecular chemistry data analysis.

PubMed

Brynn Hibbert, D; Thordarson, Pall

2016-10-25

Data analysis is central to understanding phenomena in host-guest chemistry. We describe here recent developments in this field starting with the revelation that the popular Job plot method is inappropriate for most problems in host-guest chemistry and that the focus should instead be on systematically fitting data and testing all reasonable binding models. We then discuss approaches for estimating uncertainties in binding studies using case studies and simulations to highlight key issues. Related to this is the need for ready access to data and transparency in the methodology or software used, and we demonstrate an example a webportal () that aims to address this issue. We conclude with a list of best-practice protocols for data analysis in supramolecular chemistry that could easily be translated to other related problems in chemistry including measuring rate constants or drug IC 50 values.

Visible light reduces C. elegans longevity.

PubMed

De Magalhaes Filho, C Daniel; Henriquez, Brian; Seah, Nicole E; Evans, Ronald M; Lapierre, Louis R; Dillin, Andrew

2018-03-02

The transparent nematode Caenorhabditis elegans can sense UV and blue-violet light to alter behavior. Because high-dose UV and blue-violet light are not a common feature outside of the laboratory setting, we asked what role, if any, could low-intensity visible light play in C. elegans physiology and longevity. Here, we show that C. elegans lifespan is inversely correlated to the time worms were exposed to visible light. While circadian control, lite-1 and tax-2 do not contribute to the lifespan reduction, we demonstrate that visible light creates photooxidative stress along with a general unfolded-protein response that decreases the lifespan. Finally, we find that long-lived mutants are more resistant to light stress, as well as wild-type worms supplemented pharmacologically with antioxidants. This study reveals that transparent nematodes are sensitive to visible light radiation and highlights the need to standardize methods for controlling the unrecognized biased effect of light during lifespan studies in laboratory conditions.

20-micron transparency and atmospheric water vapor at the Wyoming Infrared Observatory

NASA Technical Reports Server (NTRS)

Grasdalen, G. L.; Gehrz, R. D.; Hackwell, J. A.; Freedman, R.

1985-01-01

The atmospheric transparency at 19.5 and 23 microns from the Wyoming Infrared Observatory over the past six years has been examined. It is found that the transparency is largely controlled by the season. Four months: June, July, August, and September have very poor 20-micron transparency. During the rest of the year the transparency is usually quite good at 19.5 microns and moderately good at 23 microns. Using rawinsonde data and theoretical calculations for the expected infrared transparency, the measures of 20-micron transparency were calibrated in terms of atmospheric water-vapor content. The water vapor over the Wyoming Infrared Observatory is found to compare favorably with that above other proposed or developed sites: Mauna Kea, Mount Graham, and Wheeler Peak.

Transparent and stretchable high-performance supercapacitors based on wrinkled graphene electrodes.

PubMed

Chen, Tao; Xue, Yuhua; Roy, Ajit K; Dai, Liming

2014-01-28

Transparent and/or stretchable energy storage devices have attracted intense attention due to their unique optical and/or mechanical properties as well as their intrinsic energy storage function. However, it remains a great challenge to integrate transparent and stretchable properties into an energy storage device because the currently developed electrodes are either transparent or stretchable, but not both. Herein, we report a simple method to fabricate wrinkled graphene with high stretchability and transparency. The resultant wrinkled graphene sheets were used as both current collector and electrode materials to develop transparent and stretchable supercapacitors, which showed a high transparency (57% at 550 nm) and can be stretched up to 40% strain without obvious performance change over hundreds of stretching cycles.

Flexible and fragmentable tandem photosensitive nanocrystal skins

NASA Astrophysics Data System (ADS)

Akhavan, S.; Uran, C.; Bozok, B.; Gungor, K.; Kelestemur, Y.; Lesnyak, V.; Gaponik, N.; Eychmüller, A.; Demir, H. V.

2016-02-01

We proposed and demonstrated the first account of large-area, semi-transparent, tandem photosensitive nanocrystal skins (PNSs) constructed on flexible substrates operating on the principle of photogenerated potential buildup, which avoid the need for applying an external bias and circumvent the current-matching limitation between junctions. We successfully fabricated and operated the tandem PNSs composed of single monolayers of colloidal water-soluble CdTe and CdHgTe nanocrystals (NCs) in adjacent junctions on a Kapton polymer tape. Owing to the usage of a single NC layer in each junction, noise generation was significantly reduced while keeping the resulting PNS films considerably transparent. In each junction, photogenerated excitons are dissociated at the interface of the semi-transparent Al electrode and the NC layer, with holes migrating to the contact electrode and electrons trapped in the NCs. As a result, the tandem PNSs lead to an open-circuit photovoltage buildup equal to the sum of those of the two single junctions, exhibiting a total voltage buildup of 128.4 mV at an excitation intensity of 75.8 μW cm-2 at 350 nm. Furthermore, we showed that these flexible PNSs could be bent over 3.5 mm radius of curvature and cut out in arbitrary shapes without damaging the operation of individual parts and without introducing any significant loss in the total sensitivity. These findings indicate that the NC skins are promising as building blocks to make low-cost, flexible, large-area UV/visible sensing platforms with highly efficient full-spectrum conversion.We proposed and demonstrated the first account of large-area, semi-transparent, tandem photosensitive nanocrystal skins (PNSs) constructed on flexible substrates operating on the principle of photogenerated potential buildup, which avoid the need for applying an external bias and circumvent the current-matching limitation between junctions. We successfully fabricated and operated the tandem PNSs composed of single monolayers of colloidal water-soluble CdTe and CdHgTe nanocrystals (NCs) in adjacent junctions on a Kapton polymer tape. Owing to the usage of a single NC layer in each junction, noise generation was significantly reduced while keeping the resulting PNS films considerably transparent. In each junction, photogenerated excitons are dissociated at the interface of the semi-transparent Al electrode and the NC layer, with holes migrating to the contact electrode and electrons trapped in the NCs. As a result, the tandem PNSs lead to an open-circuit photovoltage buildup equal to the sum of those of the two single junctions, exhibiting a total voltage buildup of 128.4 mV at an excitation intensity of 75.8 μW cm-2 at 350 nm. Furthermore, we showed that these flexible PNSs could be bent over 3.5 mm radius of curvature and cut out in arbitrary shapes without damaging the operation of individual parts and without introducing any significant loss in the total sensitivity. These findings indicate that the NC skins are promising as building blocks to make low-cost, flexible, large-area UV/visible sensing platforms with highly efficient full-spectrum conversion. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr05063d

Method for Improving Acoustic Impedance of Epoxy Resins

DTIC Science & Technology

2010-06-21

include neoprene, ethylene propylene diene monomer ( EPDM ) and polyurethane rubbers . Typical applications of these materials encapsulate and protect...a different material (e.g., rubber ) cannot be used. Thus, a hard, strong and acoustically transparent material is needed. Suitable high modulus...an epoxy resin. In this method, an epoxy resin component is mixed with a rubber component. The epoxy resin component is preferably a bisphenol A

Proceedings of the 12th Annual Precise Time and Time Interval (PTTI) Applications and Planning Meeting

NASA Technical Reports Server (NTRS)

Wardrip, S. C. (Editor)

1981-01-01

The meeting gave PTTI managers, systems engineers, and program planners a transparent view of the state-of-the-art, an opportunity to express needs, a view of important future trends, and a review of relevant past accomplishments. The PTTI users were provided with new and useful applications, procedures, and techniques. Emphasis is placed on military applications and avionics.

DoD Freedom of Information Act Policies Need Improvement

DTIC Science & Technology

2016-08-16

of Defense that supports the warfighter; promotes accountability , integrity, and efficiency; advises the Secretary of Defense and Congress; and...and Budget. On December 31, 2007, Congress passed the “OPEN Government Act of 2007,” which provided for greater agency transparency and accountability ...Finance and Accounting Service U.S. Special Operations Command Defense Contract Management Agency U.S. Southern Command Defense Health Agency U.S

Enabling and Encouraging Transparency in Earth Science Data for Decision Making

NASA Astrophysics Data System (ADS)

Abbott, S. B.

2010-12-01

Our ability to understand, respond, and make decisions about our changing planet hinges on timely scientific information and situational awareness. Information and understanding will continue to be the foundations of decision support in the face of uncertainty. Over the last 40 years, investments in Earth observations have brought remarkable achievements in weather prediction, disaster prediction and response, land management, and our broad base of Earth science knowledge. The only way to know what is happening to our planet and to manage our resources wisely is to measure it, This means tracking changes decade after decade and reanalyzing the record in light of new insights, technologies, and methodologies. In order to understand and respond to climate change and other global challenges, there is a need for a high degree of transparency in the publication, management, traceability, and citability of science data, and particularly for Earth science data. In addition, it is becoming increasingly important that free, open, and authoritative sources of quality data are available for peer review. One important focus is on applications and opportunities for enhancing data exchange standards for use with Earth science data. By increasing the transparency of scientific work and providing incentives for researchers and institutions to openly share data, we will more effectively leverage the scientific capacity of our Nation to address climate change and to meet future challenges. It is an enormous challenge to collect, organize, and communicate the vast stores of data maintained across the government. The Administration is committed to moving past these barriers in providing the American public with unprecedented access to useful government data, including an open architecture and making data available in multiple formats. The goal is to enable better decision-making, drive transparency, and to help power innovation for a stronger America. Whether for a research project, developing a new application, or evaluating a business opportunity, data access is essential. This talk will examine the need for improving access environmental data records derived from satellite and in situ observations and the Administration’s policies and efforts toward releasing data, establishing standards, maintaining transparency, and disseminating information for decision making. There are key questions to be answered in order to improve collection, storage, and dissemination of government data over time: How should agencies contribute data sets? Should agencies inventory and prioritize all their data? Or set a fixed number of data sets that must be published each year? Or set a voluntary target? Finally, what types of applications should be built to leverage all this data? How do we make these applications compelling and useful to businesses, government, and the American people?

Data sharing and the evolving role of statisticians.

PubMed

Manamley, Nick; Mallett, Steve; Sydes, Matthew R; Hollis, Sally; Scrimgeour, Alison; Burger, Hans Ulrich; Urban, Hans-Joerg

2016-07-08

Greater transparency and, in particular, sharing of clinical study reports and patient level data for further research is an increasingly important topic for the pharmaceutical and biotechnology industry and other organisations who sponsor and conduct clinical research as well as academic researchers and patient advocacy groups. Statisticians are ambassadors for data sharing and are central to its success. They play an integral role in data sharing discussions within their companies and also externally helping to shape policy and processes while providing input into practical solutions to aid data sharing. Data sharing is generating changes in the required profile for statisticians in the pharmaceutical and biotechnology industry, as well as academic institutions and patient advocacy groups. Successful statisticians need to possess many qualities required in today's pharmaceutical environment such as collaboration, diplomacy, written and oral skills and an ability to be responsive; they are also knowledgeable when debating strategy and analytical techniques. However, increasing data transparency will require statisticians to evolve and learn new skills and behaviours during their career which may not have been an accepted part of the traditional role. Statisticians will move from being the gate-keepers of data to be data facilitators. To adapt successfully to this new environment, the role of the statistician is likely to be broader, including defining new responsibilities that lie beyond the boundaries of the traditional role. Statisticians should understand how data transparency can benefit them and the potential strategic advantage it can bring and be fully aware of the pharmaceutical and biotechnology industry commitments to data transparency and the policies within their company or research institute in addition to focusing on reviewing requests and provisioning data. Data transparency will evolve the role of statisticians within the pharmaceutical and biotechnology industry, academia and research bodies to a level which may not have been an accepted part of their traditional role or career. In the future, skills will be required to manage challenges arising from data sharing; statisticians will need strong scientific and statistical guiding principles for reanalysis and supplementary analyses based on researchers' requests, have enhanced consultancy skills, in particular the ability to defend good statistical practice in the face of criticism and the ability to critique methods of analysis. Statisticians will also require expertise in data privacy regulations, data redaction and anonymisation and be able to assess the probability of re-identification, an ability to understand analyses conducted by researchers and recognise why such analyses may propose different results compared to the original analyses. Bringing these skills to the implementation of data sharing and interpretation of the results will help to maximise the value of shared data while guarding against misleading conclusions.

Exploring academics' views on designs, methods, characteristics and outcomes of inclusive health research with people with intellectual disabilities: a modified Delphi study.

PubMed

Frankena, T K; Naaldenberg, J; Cardol, M; Meijering, J V; Leusink, G; van Schrojenstein Lantman-de Valk, H M J

2016-08-18

The British Medical Journal's (BMJ's) patient revolution strives for collaboration with patients in healthcare and health research. This paper studies collaboration with people with intellectual disabilities (ID) in health research, also known as inclusive health research. Currently, transparency and agreement among academics is lacking regarding its main aspects, preventing upscaling of the patient revolution. This study aims to gain agreement among academics on 3 aspects of inclusive health research for people with ID: (1) designs and methods, (2) most important characteristics and (3) outcomes. A Delphi study was conducted with academics with experience in inclusive (health) research and on people with ID. The study consisted of 2 sequential questionnaire rounds (n=24; n=17), followed by in-depth interviews (n=10). Academics agreed on (1) a collaborative approach to be most suitable to inclusive health research, (2) characteristics regarding the accessibility and facilitation of inclusive health research, and (3) several outcomes of inclusive health research for people with ID and healthcare. Other characteristics agreed on included: atmosphere, relationship, engagement, partnership and power. It was stressed that these characteristics ensure meaningful inclusion. Interviewed academics voiced the need for a tool supporting the facilitation and evaluation of inclusive health research. There was ambiguity as to what this tool should comprise and the extent to which it was possible to capture the complex process of inclusive health research. This study underlines the need for transparency, facilitation and evaluation of inclusive health research. The need for in-depth interviews after 2 Delphi rounds underlines its complexity and context dependence. To increase process transparency, future research should focus on gaining insight into inclusive health research in its context. A tool could be developed to facilitate and evaluate inclusive health research. This tool will be partially applicable to participatory research in general and thereby upscale the patient revolution. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Systematic and transparent inclusion of ethical issues and recommendations in clinical practice guidelines: a six-step approach.

PubMed

Mertz, Marcel; Strech, Daniel

2014-12-04

Clinical practice guidelines (CPGs), a core tool to foster medical professionalism, differ widely in whether and how they address disease-specific ethical issues (DSEIs), and current manuals for CPG development are silent on this issue. The implementation of an explicit method faces two core challenges: first, it adds further complexity to CPG development and requires human and financial resources. Second, in contrast to the in-depth treatment of ethical issues that is standard in bioethics, the inclusion of DSEIs in CPGs need to be more pragmatic, reductive, and simplistic, but without rendering the resulting recommendations useless or insufficiently justified. This paper outlines a six-step approach, EthicsGuide, for the systematic and transparent inclusion of ethical issues and recommendations in CPGs. The development of EthicsGuide is based on (a) methodological standards in evidence-based CPG development, (b) principles of bioethics, (c) research findings on how DSEIs are currently addressed in CPGs, and (d) findings from two proof-of-concept analyses of the EthicsGuide approach. The six steps are 1) determine the DSEI spectrum and the need for ethical recommendations; 2) develop statements on which to base ethical recommendations; 3) categorize, classify, condense, and paraphrase the statements; 4) write recommendations in a standard form; 5) validate and justify recommendations, making any necessary modifications; and 6) address consent. All six steps necessarily come into play when including DSEIs in CPGs. If DSEIs are not explicitly addressed, they are unavoidably dealt with implicitly. We believe that as ethicists gain greater involvement in decision-making about health, personal rights, or economic issues, they should make their methods transparent and replicable by other researchers; and as ethical issues become more widely reflected in CPGs, CPG developers have to learn how to address them in a methodologically adequate way. The approach proposed should serve as a basis for further discussion on how to reach these goals. It breaks open the black box of what ethicists implicitly do when they develop recommendations. Further, interdisciplinary discussion and pilot tests are needed to explore the minimal requirements that guarantee a simplified procedure which is still acceptable and does not become mere window dressing.

Influence of Shading on Cooling Energy Demand

NASA Astrophysics Data System (ADS)

Rabczak, Sławomir; Bukowska, Maria; Proszak-Miąsik, Danuta; Nowak, Krzysztof

2017-10-01

The article presents an analysis of the building cooling load taking into account the variability of the factors affecting the size of the heat gains. In order to minimize the demand for cooling, the effect of shading elements installed on the outside on the windows and its effect on size of the cooling capacity of air conditioning system for the building has been estimated. Multivariate building cooling load calculations to determine the size of the reduction in cooling demand has derived. Determination of heat gain from the sun is laborious, but gives a result which reflects the influence of the surface transparent partitions, devices used as sunscreen and its location on the building envelope in relation to the world, as well as to the internal heat gains has great attention in obtained calculation. In this study, included in the balance sheet of solar heat gains are defined in three different shading of windows. Calculating the total demand cooling is made for variants assuming 0% shading baffles transparent, 50% shading baffles transparent external shutters at an angle of 45 °, 100% shading baffles transparent hours 12 from the N and E and from 12 from the S and W of the outer slat blinds. The calculation of the average hourly cooling load was taken into account the option assuming the hypothetical possibility of default by up to 10% of the time assumed the cooling season temperatures in the rooms. To reduce the consumption of electricity energy in the cooling system of the smallest variant identified the need for the power supply for the operation of the cooling system. Also assessed the financial benefits of the temporary default of comfort.

Optical and adhesive properties of dust deposits on solar mirrors and their effects on specular reflectivity and electrodynamic cleaning for mitigating energy-yield loss

NASA Astrophysics Data System (ADS)

Mazumder, Malay; Yellowhair, Julius; Stark, Jeremy; Heiling, Calvin; Hudelson, John; Hao, Fang; Gibson, Hannah; Horenstein, Mark

2014-10-01

Large-scale solar plants are mostly installed in semi-arid and desert areas. In those areas, dust layer buildup on solar collectors becomes a major cause for energy yield loss. Development of transparent electrodynamic screens (EDS) and their applications for self-cleaning operation of solar mirrors are presented with a primary focus on the removal dust particles smaller than 30 µm in diameter while maintaining specular reflection efficiency < 90%. An EDS consists of thin rectangular array of parallel transparent conducting electrodes deposited on a transparent dielectric surface. The electrodes are insulated from each other and are embedded within a thin transparent dielectric film. The electrodes are activated using three-phase high-voltage pulses at low current (< 1 mA/m2 ). The three-phase electric field charges the deposited particles, lifts them form the substrate by electrostatic forces and propels the dust layer off of the collector's surface by a traveling wave. The cleaning process takes less than 2 minutes; needs energy less than 1 Wh/m2 without requiring any water or manual labor. The reflection efficiency can be restored > 95% of the original clean-mirror efficiency. We briefly present (1) loss of specular reflection efficiency as a function of particle size distribution of deposited dust, and (2) the effects of the electrode design and materials used for minimizing initial loss of specular reflectivity in producing EDS-integrated solar mirrors. Optimization of EDS by using a figure of merit defined by the ratio of dust removal efficiency to the initial loss of specular reflection efficiency is discussed.

[Evaluation of the medical value of a drug. A necessity for the Transparency Commission].

PubMed

Avouac, B

1992-01-01

The marketing approval (AMM) is based on criteria of pharmaceutical quality, efficacy and safety of use. Before marketing, the data are collected by means of double-blind, randomized, prospective clinical trials that compare the study product to a reference product. A post-AMM assessment is needed to define the increase of the medical benefit (ASMR) and the therapeutic value of the new drugs. The quantification of the ASMR is essential for registration on the list of drugs reimbursable for those who benefit from Social Security. The evaluation of the therapeutic value and the nature of the affection treated are the criteria upon which the reimbursement ratio is chosen. After marketing, the reevaluation of the medical benefit and the drugs' usefulness may be compared to the treatment's net medical cost (direct + indirect cost--avoided cost) in cost/utility or cost/benefit studies. The Transparency Commission has worked out a scale of assessment of the ASMR which will orient recommendation, or non-recommendation, of registration on the list of reimbursable drugs as well as price fixing proposals. In the future, the Transparency Commission is to strengthen its position regarding the good use of the drug through a better prescriber information system. Thanks to the pharmaco-epidemiology and the pharmaco-vigilance data, the Transparency Commission will be able to guarantee the post-marketing follow-up of the drugs. The examination of the products' conditions of use, the reevaluation of the treatment's advantages based on the utility studies and the epidemiological surveys, and the cost-benefit studies will contribute to a medical control of health spending linked to drug consumption.

Quasiparticle energies, excitonic effects, and dielectric screening in transparent conducting oxides

NASA Astrophysics Data System (ADS)

Schleife, André

Using the power of high-performance super computers, computational materials scientists nowadays employ highly accurate quantum-mechanical approaches to reliably predict materials properties. In particular, many-body perturbation theory is an excellent framework for performing theoretical spectroscopy on novel materials including transparent conducting oxides, since this framework accurately describes quasiparticle and excitonic effects.We recently used hybrid exchange-correlation functionals and an efficient implementation of the Bethe-Salpeter approach to investigate several important transparent conducting oxides. Despite their exceptional potential for applications in photovoltaics and optoelectronics their optical properties oftentimes remain poorly understood: Our calculations explain the optical spectrum of bixbyite indium oxide over a very large photon energy range, which allows us to discuss the importance of quasiparticle and excitonic effects at low photon energies around the absorption onset, but also for excitations up to 40 eV. We show that in this regime the energy dependence of the electronic self energy cannot be neglected. Furthermore, we investigated the influence of excitonic effects on optical absorption for lanthanum-aluminum oxide and hafnium oxide. Their complicated conduction band structures require an accurate description of quasiparticle energies and we find that for these strongly polar materials, a contribution of the lattice polarizability to dielectric screening needs to be taken into account. We discuss how this affects the electron-hole interaction and find a strong influence on excitonic effects.The deep understanding of electronic excitations that can be obtained using these modern first-principles techniques, eventually will allow for computational materials design, e.g. of band gaps, densities of states, and optical properties of transparent conducting oxides and other materials with societally important applications.

Situated cognition in clinical visualization: the role of transparency in GammaKnife neurosurgery planning.

PubMed

Dinka, David; Nyce, James M; Timpka, Toomas

2009-06-01

The aim of this study was to investigate how the clinical use of visualization technology can be advanced by the application of a situated cognition perspective. The data were collected in the GammaKnife radiosurgery setting and analyzed using qualitative methods. Observations and in-depth interviews with neurosurgeons and physicists were performed at three clinics using the Leksell GammaKnife. The users' ability to perform cognitive tasks was found to be reduced each time visualizations incongruent with the particular user's perception of clinical reality were used. The main issue here was a lack of transparency, i.e. a black box problem where machine representations "stood between" users and the cognitive tasks they wanted to perform. For neurosurgeons, transparency meant their previous experience from traditional surgery could be applied, i.e. that they were not forced to perform additional cognitive work. From the view of the physicists, on the other hand, the concept of transparency was associated with mathematical precision and avoiding creating a cognitive distance between basic patient data and what is experienced as clinical reality. The physicists approached clinical visualization technology as though it was a laboratory apparatus--one that required continual adjustment and assessment in order to "capture" a quantitative clinical reality. Designers of visualization technology need to compare the cognitive interpretations generated by the new visualization systems to conceptions generated during "traditional" clinical work. This means that the viewpoint of different clinical user groups involved in a given clinical task would have to be taken into account as well. A way forward would be to acknowledge that visualization is a socio-cognitive function that has practice-based antecedents and consequences, and to reconsider what analytical and scientific challenges this presents us with.

The role of opacity and transparency in achieving strategic stability in South Asia.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rajain, Arpit; Ashraf, Tariq Mahmud

According to international relations theory, deterrence can be used as a tool to achieve stability between potentially hostile nations. India and Pakistan's long history of periodic crises raises the question of how they can achieve deterrence stability. 'Transparency' describes the flow of information between parties and plays a key role in establishing a deterrence relationship. This paper studies the balance needed between opacity and transparency in nuclear topics for the maintenance of deterrence stability between India and Pakistan. States with nuclear weapons are postulated to implement transparency in four categories: potential, capability, intent, and resolve. The study applies these categoriesmore » to the nuclear components of the ongoing India-Pakistan Composite Dialogue Working Group for Peace and Security including CBMs. To focus our efforts, we defined four scenarios to characterize representative strategic/military/political conditions. The scenarios are combinations of these two sets of opposite poles: competition - cooperation; extremism - moderation (to be understood primarily in a religious/nationalistic sense). We describe each scenario in terms of select focal areas (nuclear doctrine, nuclear command and control, nuclear stockpile, nuclear delivery/defensive systems, and conventional force posture). The scenarios help frame the realm of possibilities, and have been described in terms of expected conditions for the focal areas. We then use the conditions in each scenario to prescribe a range of information-sharing actions that the two countries could take to increase stability. We also highlight the information that should not be shared. These actions can be political (e.g., declarations), procedural (e.g., advance notice of certain military activities), or technologically based (e.g., seismic monitoring of the nuclear test moratorium).« less

Rapid synthesis of ultra-long silver nanowires for tailor-made transparent conductive electrodes: proof of concept in organic solar cells.

PubMed

José Andrés, Luis; Fe Menéndez, María; Gómez, David; Luisa Martínez, Ana; Bristow, Noel; Paul Kettle, Jeffrey; Menéndez, Armando; Ruiz, Bernardino

2015-07-03

Rapid synthesis of ultralong silver nanowires (AgNWs) has been obtained using a one-pot polyol-mediated synthetic procedure. The AgNWs have been prepared from the base materials in less than one hour with nanowire lengths reaching 195 μm, which represents the quickest synthesis and one of the highest reported aspect ratios to date. These results have been achieved through a joint analysis of all reaction parameters, which represents a clear progress beyond the state of the art. Dispersions of the AgNWs have been used to prepare thin, flexible, transparent and conducting films using spray coating. Due to the higher aspect ratio, an improved electrical percolation network is observed. This allows a low sheet resistance (RS = 20.2 Ω/sq), whilst maintaining high optical film transparency (T = 94.7%), driving to the highest reported figure-of-merit (FoM = 338). Owing to the light-scattering influence of the AgNWs, the density of the AgNW network can also be varied to enable controllability of the optical haze through the sample. Based on the identification of the optimal haze value, organic photovoltaics (OPVs) have been fabricated using the AgNWs as the transparent electrode and have been benchmarked against indium tin oxide (ITO) electrodes. Overall, the performance of OPVs made using AgNWs sees a small decrease in power conversion efficiency (PCE), primarily due to a fall in open-circuit voltage (50 mV). This work indicates that AgNWs can provide a low cost, rapid and roll-to-roll compatible alternative to ITO in OPVs, with only a small compromise in PCE needed.

Rapid synthesis of ultra-long silver nanowires for tailor-made transparent conductive electrodes: proof of concept in organic solar cells

NASA Astrophysics Data System (ADS)

José Andrés, Luis; Menéndez, María Fe; Gómez, David; Martínez, Ana Luisa; Bristow, Noel; Kettle, Jeffrey Paul; Menéndez, Armando; Ruiz, Bernardino

2015-07-01

Rapid synthesis of ultralong silver nanowires (AgNWs) has been obtained using a one-pot polyol-mediated synthetic procedure. The AgNWs have been prepared from the base materials in less than one hour with nanowire lengths reaching 195 μm, which represents the quickest synthesis and one of the highest reported aspect ratios to date. These results have been achieved through a joint analysis of all reaction parameters, which represents a clear progress beyond the state of the art. Dispersions of the AgNWs have been used to prepare thin, flexible, transparent and conducting films using spray coating. Due to the higher aspect ratio, an improved electrical percolation network is observed. This allows a low sheet resistance (RS = 20.2 Ω/sq), whilst maintaining high optical film transparency (T = 94.7%), driving to the highest reported figure-of-merit (FoM = 338). Owing to the light-scattering influence of the AgNWs, the density of the AgNW network can also be varied to enable controllability of the optical haze through the sample. Based on the identification of the optimal haze value, organic photovoltaics (OPVs) have been fabricated using the AgNWs as the transparent electrode and have been benchmarked against indium tin oxide (ITO) electrodes. Overall, the performance of OPVs made using AgNWs sees a small decrease in power conversion efficiency (PCE), primarily due to a fall in open-circuit voltage (50 mV). This work indicates that AgNWs can provide a low cost, rapid and roll-to-roll compatible alternative to ITO in OPVs, with only a small compromise in PCE needed.

78 FR 57409 - U.S. Extractive Industries Transparency Initiative Public Outreach

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-18

.... Extractive Industries Transparency Initiative Public Outreach AGENCY: Office of the Secretary, Interior... Industries Transparency Initiative (USEITI) candidacy application. By this notice, Interior is providing the...' commitment to participate in the Extractive Industries Transparency Initiative. EITI is a signature...

Free-Standing and Transparent Graphene Membrane of Polyhedron Box-Shaped Basic Building Units Directly Grown Using a NaCl Template for Flexible Transparent and Stretchable Solid-State Supercapacitors.

PubMed

Li, Na; Yang, Gongzheng; Sun, Yong; Song, Huawei; Cui, Hao; Yang, Guowei; Wang, Chengxin

2015-05-13

Transparency has never been integrated into freestanding flexible graphene paper (FF-GP), although FF-GP has been discussed extensively, because a thin transparent graphene sheet will fracture easily when the template or substrate is removed using traditional methods. Here, transparent FF-GP (FFT-GP) was developed using NaCl as the template and was applied in transparent and stretchable supercapacitors. The capacitance was improved by nearly 1000-fold compared with that of the laminated or wrinkled chemical vapor deposition graphene-film-based supercapacitors.

Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fan, Ren-Hao; Peng, Ru-Wen, E-mail: rwpeng@nju.edu.cn; Huang, Xian-Rong

2015-07-15

In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertzmore » ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies. - Highlights: • Making structured metals transparent for ultrabroadband electromagnetic waves. • Non-resonant excitation of surface plasmons or spoof surface plasmons. • Sonic artificially metallic structures transparent for broadband acoustic waves.« less

Perceptual transparency from image deformation.

PubMed

Kawabe, Takahiro; Maruya, Kazushi; Nishida, Shin'ya

2015-08-18

Human vision has a remarkable ability to perceive two layers at the same retinal locations, a transparent layer in front of a background surface. Critical image cues to perceptual transparency, studied extensively in the past, are changes in luminance or color that could be caused by light absorptions and reflections by the front layer, but such image changes may not be clearly visible when the front layer consists of a pure transparent material such as water. Our daily experiences with transparent materials of this kind suggest that an alternative potential cue of visual transparency is image deformations of a background pattern caused by light refraction. Although previous studies have indicated that these image deformations, at least static ones, play little role in perceptual transparency, here we show that dynamic image deformations of the background pattern, which could be produced by light refraction on a moving liquid's surface, can produce a vivid impression of a transparent liquid layer without the aid of any other visual cues as to the presence of a transparent layer. Furthermore, a transparent liquid layer perceptually emerges even from a randomly generated dynamic image deformation as long as it is similar to real liquid deformations in its spatiotemporal frequency profile. Our findings indicate that the brain can perceptually infer the presence of "invisible" transparent liquids by analyzing the spatiotemporal structure of dynamic image deformation, for which it uses a relatively simple computation that does not require high-level knowledge about the detailed physics of liquid deformation.

Contour junctions defined by dynamic image deformations enhance perceptual transparency.

PubMed

Kawabe, Takahiro; Nishida, Shin'ya

2017-11-01

The majority of work on the perception of transparency has focused on static images with luminance-defined contour junctions, but recent work has shown that dynamic image sequences with dynamic image deformations also provide information about transparency. The present study demonstrates that when part of a static image is dynamically deformed, contour junctions at which deforming and nondeforming contours are connected facilitate the deformation-based perception of a transparent layer. We found that the impression of a transparent layer was stronger when a dynamically deforming area was adjacent to static nondeforming areas than when presented alone. When contour junctions were not formed at the dynamic-static boundaries, however, the impression of a transparent layer was not facilitated by the presence of static surrounding areas. The effect of the deformation-defined junctions was attenuated when the spatial pattern of luminance contrast at the junctions was inconsistent with the perceived transparency related to luminance contrast, while the effect did not change when the spatial luminance pattern was consistent with it. In addition, the results showed that contour completions across the junctions were required for the perception of a transparent layer. These results indicate that deformation-defined junctions that involve contour completion between deforming and nondeforming regions enhance the perception of a transparent layer, and that the deformation-based perceptual transparency can be promoted by the simultaneous presence of appropriately configured luminance and contrast-other features that can also by themselves produce the sensation of perceiving transparency.

Graphene Transparent Conductive Electrodes for Next- Generation Microshutter Arrays

NASA Technical Reports Server (NTRS)

Li, Mary; Sultana, Mahmooda; Hess, Larry

2012-01-01

Graphene is a single atomic layer of graphite. It is optically transparent and has high electron mobility, and thus has great potential to make transparent conductive electrodes. This invention contributes towards the development of graphene transparent conductive electrodes for next-generation microshutter arrays. The original design for the electrodes of the next generation of microshutters uses indium-tin-oxide (ITO) as the electrode material. ITO is widely used in NASA flight missions. The optical transparency of ITO is limited, and the material is brittle. Also, ITO has been getting more expensive in recent years. The objective of the invention is to develop a graphene transparent conductive electrode that will replace ITO. An exfoliation procedure was developed to make graphene out of graphite crystals. In addition, large areas of single-layer graphene were produced using low-pressure chemical vapor deposition (LPCVD) with high optical transparency. A special graphene transport procedure was developed for transferring graphene from copper substrates to arbitrary substrates. The concept is to grow large-size graphene sheets using the LPCVD system through chemical reaction, transfer the graphene film to a substrate, dope graphene to reduce the sheet resistance, and pattern the film to the dimension of the electrodes in the microshutter array. Graphene transparent conductive electrodes are expected to have a transparency of 97.7%. This covers the electromagnetic spectrum from UV to IR. In comparison, ITO electrodes currently used in microshutter arrays have 85% transparency in mid-IR, and suffer from dramatic transparency drop at a wavelength of near-IR or shorter. Thus, graphene also has potential application as transparent conductive electrodes for Schottky photodiodes in the UV region.

Human factors aspects of control room design

NASA Technical Reports Server (NTRS)

Jenkins, J. P.

1983-01-01

A plan for the design and analysis of a multistation control room is reviewed. It is found that acceptance of the computer based information system by the uses in the control room is mandatory for mission and system success. Criteria to improve computer/user interface include: match of system input/output with user; reliability, compatibility and maintainability; easy to learn and little training needed; self descriptive system; system under user control; transparent language, format and organization; corresponds to user expectations; adaptable to user experience level; fault tolerant; dialog capability user communications needs reflected in flexibility, complexity, power and information load; integrated system; and documentation.

75 FR 26916 - Federal Acquisition Regulation: FAR Case 2009-004, Enhancing Contract Transparency

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... Regulation: FAR Case 2009-004, Enhancing Contract Transparency AGENCY: Department of Defense (DoD), General... commercial or financial information. This transparency effort is intended to promote efficiency in Government... the Administration's memorandum entitled Transparency and Open Government (January 21, 2009...

V isotope composition in modern marine hydrothermal sediments

NASA Astrophysics Data System (ADS)

Wu, F.; Owens, J. D.; Nielsen, S.; German, C. R.; Rachel, M.

2017-12-01

Vanadium is multivalence transition metal with two isotopes (51V and 50V). Recent work has shown that large V isotope variations occur with oxygen variations in modern sediments (Wu et al., 2016 and 2017 Goldschmidt Abstracts), providing its potential as a promising proxy for determining low oxygen conditions. However, the development of V isotopes as a proxy to probe past redox conditions requires a comprehensive understanding of the modern oceanic isotopic mass balance. Therein, the scavenging of V from the hydrous iron oxides in hydrothermal fluid has been shown to be an important removal process from seawater (Rudnicki and Elderfield, 1993 GCA) but remains unquantified. In this study, we analyzed V isotopic compositions of metalliferous sediments around the active TAG hydrothermal mound from the mid-Atlantic Ridge (26° degrees North) and the Eastern Pacific Zonal Transect (GEOTRACES EPZT cruise GP16). The TAG sediments deposited as Fe oxyhydroxides from plume fall-out, and have δ51V values between -0.3 to 0‰. The good correlation between Fe and V for these metalliferous sediments indicate that the accumulation of V in these samples is directly related to the deposition of Fe oxyhydroxides, which also control their V isotope signature. The EPZT samples cover 8,000 km in the South Pacific Ocean with sedimentary areas that underlie the Peru upwelling region and the well-oxygenated deep South Pacific Ocean influenced by hydtorthermal plume material from southern East Pacific Rise (EPR). The sediments collected at the east of the EPR have δ51V values between -1.2 to -0.7‰, similar to previous δ51V of oxic sediments. In contrast, the sediments from the west of the EPR have δ51V values (-0.4 to 0‰) similar to hydrothermal sediments from the mid-Atlantic Ridge, indicating the long transportation (more than 4,000 km, Fitzsimmons et al., 2017 NG) of Fe and Mn from hydrothermal plume and their incorporation into sediments have a major impact on the cycle of V in the ocean. The fingerprint of δ51V between oxic sediments and hydrothermal flux are significantly different and should be easily discernible in the geologic record. Consequently, our results show that the removal of V from hydrothermal sediments has an important influence on the marine V cycle, which needs to be considered for future modern and paleoclimatic studies.

Self bleaching photoelectrochemical-electrochromic device

DOEpatents

Bechinger, Clemens S.; Gregg, Brian A.

2002-04-09

A photoelectrochemical-electrochromic device comprising a first transparent electrode and a second transparent electrode in parallel, spaced relation to each other. The first transparent electrode is electrically connected to the second transparent electrode. An electrochromic material is applied to the first transparent electrode and a nanoporous semiconductor film having a dye adsorbed therein is applied to the second transparent electrode. An electrolyte layer contacts the electrochromic material and the nanoporous semiconductor film. The electrolyte layer has a redox couple whereby upon application of light, the nanoporous semiconductor layer dye absorbs the light and the redox couple oxidizes producing an electric field across the device modulating the effective light transmittance through the device.

Water transparency drives intra-population divergence in Eurasian Perch (Perca fluviatilis).

PubMed

Bartels, Pia; Hirsch, Philipp E; Svanbäck, Richard; Eklöv, Peter

2012-01-01

Trait combinations that lead to a higher efficiency in resource utilization are important drivers of divergent natural selection and adaptive radiation. However, variation in environmental features might constrain foraging in complex ways and therefore impede the exploitation of critical resources. We tested the effect of water transparency on intra-population divergence in morphology of Eurasian perch (Perca fluviatilis) across seven lakes in central Sweden. Morphological divergence between near-shore littoral and open-water pelagic perch substantially increased with increasing water transparency. Reliance on littoral resources increased strongly with increasing water transparency in littoral populations, whereas littoral reliance was not affected by water transparency in pelagic populations. Despite the similar reliance on pelagic resources in pelagic populations along the water transparency gradient, the utilization of particular pelagic prey items differed with variation in water transparency in pelagic populations. Pelagic perch utilized cladocerans in lakes with high water transparency and copepods in lakes with low water transparency. We suggest that under impaired visual conditions low utilization of littoral resources by littoral perch and utilization of evasive copepods by pelagic perch may lead to changes in morphology. Our findings indicate that visual conditions can affect population divergence in predator populations through their effects on resource utilization.

Primary care consultations about medically unexplained symptoms: how do patients indicate what they want?

PubMed

Salmon, Peter; Ring, Adele; Humphris, Gerry M; Davies, John C; Dowrick, Christopher F

2009-04-01

Patients with medically unexplained physical symptoms (MUS) are often thought to deny psychological needs when they consult general practitioners (GPs) and to request somatic intervention instead. We tested predictions from the contrasting theory that they are transparent in communicating their psychological and other needs. To test predictions that what patients tell GPs when they consult about MUS is related transparently to their desire for (1) emotional support, (2) symptom explanation and (3) somatic intervention. Prospective naturalistic study. Before consultation, patients indicated what they wanted from it using a self-report questionnaire measuring patients' desire for: emotional support, explanation and reassurance, and physical investigation and treatment. Their speech during consultation was audio-recorded, transcribed and coded utterance-by-utterance. Multilevel regression analysis tested relationships between what patients sought and what they said. Patients (N = 326) consulting 33 GPs about symptoms that the GPs designated as MUS. Patients who wanted emotional support spoke more about psychosocial problems, including psychosocial causes of symptoms and their need for psychosocial help. Patients who wanted explanation and reassurance suggested more physical explanations, including diseases, but did not overtly request explanation. Patients' wish for somatic intervention was associated only with their talk about details of such interventions and not with their requests for them. In general, patients with medically unexplained symptoms provide many cues to their desire for emotional support. They are more indirect or guarded in communicating their desire for explanation and somatic intervention.

A Design Methodology for Medical Processes.

PubMed

Ferrante, Simona; Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

2016-01-01

Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient's needs, the uncertainty of the patient's response, and the indeterminacy of patient's compliance to treatment. Also, the multiple actors involved in patient's care need clear and transparent communication to ensure care coordination. In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution.

Transparency and Oversight in Local Wellness Policies

ERIC Educational Resources Information Center

Chriqui, Jamie F.; Chaloupka, Frank J.

2011-01-01

Background: Advocates have called for increased wellness policy transparency and oversight through the use of health advisory councils. This study examines (1) wellness policy transparency, (2) advisory council requirements, (3) factors associated with each, and (4) whether transparency or advisory council requirements are indicative of a stronger…

77 FR 38597 - Multistakeholder Process To Develop Consumer Data Privacy Code of Conduct Concerning Mobile...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... Process To Develop Consumer Data Privacy Code of Conduct Concerning Mobile Application Transparency AGENCY... convene the first meeting of a privacy multistakeholder process concerning mobile application transparency... concerning mobile application transparency. Stakeholders will engage in an open, transparent, consensus...

High Temperature Transparent Furnace Development

NASA Technical Reports Server (NTRS)

Bates, Stephen C.

1997-01-01

This report describes the use of novel techniques for heat containment that could be used to build a high temperature transparent furnace. The primary objective of the work was to experimentally demonstrate transparent furnace operation at 1200 C. Secondary objectives were to understand furnace operation and furnace component specification to enable the design and construction of a low power prototype furnace for delivery to NASA in a follow-up project. The basic approach of the research was to couple high temperature component design with simple concept demonstration experiments that modify a commercially available transparent furnace rated at lower temperature. A detailed energy balance of the operating transparent furnace was performed, calculating heat losses through the furnace components as a result of conduction, radiation, and convection. The transparent furnace shells and furnace components were redesigned to permit furnace operation at at least 1200 C. Techniques were developed that are expected to lead to significantly improved heat containment compared with current transparent furnaces. The design of a thermal profile in a multizone high temperature transparent furnace design was also addressed. Experiments were performed to verify the energy balance analysis, to demonstrate some of the major furnace improvement techniques developed, and to demonstrate the overall feasibility of a high temperature transparent furnace. The important objective of the research was achieved: to demonstrate the feasibility of operating a transparent furnace at 1200 C.

Transparent electrodes fabricated via the self-assembly of silver nanowires using a bubble template.

PubMed

Tokuno, Takehiro; Nogi, Masaya; Jiu, Jinting; Sugahara, Tohru; Suganuma, Katsuaki

2012-06-26

To shore up the demand of transparent electrodes for wide applications such as organic light emitting diodes and solar cells, transparent electrodes are required as an alternative for indium tin oxide electrodes. Herein the self-assembly method with a bubble template paves the way for cost-effective fabrication of transparent electrodes with high conductivity and transparency using self-assembly of silver nanowires (AgNWs) in a bubble template. AgNWs were first dispersed in water that was bubbled with a surfactant and a thickening agent. Furthermore, these AgNWs were assembled by lining along the bubble ridges. When the bubbles containing the AgNWs were sandwiched between two glass substrates, the bubble ridges including the AgNWs formed continuous polygonal structures. Mesh structures were formed on both glass substrates after air-drying. The mesh structures evolved into mesh transparent electrodes following heat-treatment. The AgNW mesh structure exhibited a low sheet resistance of 6.2 Ω/square with a transparency of 84% after heat treatment at 200 °C for 20 min. The performance is higher than that of transparent electrodes with random networks of AgNWs. Furthermore, the conductivity and transparency of the mesh transparent electrodes can be adjusted by changing the amount of the AgNW suspension and the space between the two glass substrates.

Friend or foe: exploiting sensor failures for transparent object localization and classification

NASA Astrophysics Data System (ADS)

Seib, Viktor; Barthen, Andreas; Marohn, Philipp; Paulus, Dietrich

2017-02-01

In this work we address the problem of detecting and recognizing transparent objects using depth images from an RGB-D camera. Using this type of sensor usually prohibits the localization of transparent objects since the structured light pattern of these cameras is not reflected by transparent surfaces. Instead, transparent surfaces often appear as undefined values in the resulting images. However, these erroneous sensor readings form characteristic patterns that we exploit in the presented approach. The sensor data is fed into a deep convolutional neural network that is trained to classify and localize drinking glasses. We evaluate our approach with four different types of transparent objects. To our best knowledge, no datasets offering depth images of transparent objects exist so far. With this work we aim at closing this gap by providing our data to the public.

Positron annihilation in transparent ceramics

NASA Astrophysics Data System (ADS)

Husband, P.; Bartošová, I.; Slugeň, V.; Selim, F. A.

2016-01-01

Transparent ceramics are emerging as excellent candidates for many photonic applications including laser, scintillation and illumination. However achieving perfect transparency is essential in these applications and requires high technology processing and complete understanding for the ceramic microstructure and its effect on the optical properties. Positron annihilation spectroscopy (PAS) is the perfect tool to study porosity and defects. It has been applied to investigate many ceramic structures; and transparent ceramics field may be greatly advanced by applying PAS. In this work positron lifetime (PLT) measurements were carried out in parallel with optical studies on yttrium aluminum garnet transparent ceramics in order to gain an understanding for their structure at the atomic level and its effect on the transparency and light scattering. The study confirmed that PAS can provide useful information on their microstructure and guide the technology of manufacturing and advancing transparent ceramics.

Transparent actuators and robots based on single-layer superaligned carbon nanotube sheet and polymer composites

NASA Astrophysics Data System (ADS)

Chen, Luzhuo; Weng, Mingcen; Zhang, Wei; Zhou, Zhiwei; Zhou, Yi; Xia, Dan; Li, Jiaxin; Huang, Zhigao; Liu, Changhong; Fan, Shoushan

2016-03-01

Transparent actuators have been attracting emerging interest recently, as they demonstrate potential applications in the fields of invisible robots, tactical displays, variable-focus lenses, and flexible cellular phones. However, previous technologies did not simultaneously realize macroscopic transparent actuators with advantages of large-shape deformation, low-voltage-driven actuation and fast fabrication. Here, we develop a fast approach to fabricate a high-performance transparent actuator based on single-layer superaligned carbon nanotube sheet and polymer composites. Various advantages of single-layer nanotube sheets including high transparency, considerable conductivity, and ultra-thin dimensions together with selected polymer materials completely realize all the above required advantages. Also, this is the first time that a single-layer nanotube sheet has been used to fabricate actuators with high transparency, avoiding the structural damage to the single-layer nanotube sheet. The transparent actuator shows a transmittance of 72% at the wavelength of 550 nm and bends remarkably with a curvature of 0.41 cm-1 under a DC voltage for 5 s, demonstrating a significant advance in technological performances compared to previous conventional actuators. To illustrate their great potential usage, a transparent wiper and a humanoid robot ``hand'' were elaborately designed and fabricated, which initiate a new direction in the development of high-performance invisible robotics and other intelligent applications with transparency.Transparent actuators have been attracting emerging interest recently, as they demonstrate potential applications in the fields of invisible robots, tactical displays, variable-focus lenses, and flexible cellular phones. However, previous technologies did not simultaneously realize macroscopic transparent actuators with advantages of large-shape deformation, low-voltage-driven actuation and fast fabrication. Here, we develop a fast approach to fabricate a high-performance transparent actuator based on single-layer superaligned carbon nanotube sheet and polymer composites. Various advantages of single-layer nanotube sheets including high transparency, considerable conductivity, and ultra-thin dimensions together with selected polymer materials completely realize all the above required advantages. Also, this is the first time that a single-layer nanotube sheet has been used to fabricate actuators with high transparency, avoiding the structural damage to the single-layer nanotube sheet. The transparent actuator shows a transmittance of 72% at the wavelength of 550 nm and bends remarkably with a curvature of 0.41 cm-1 under a DC voltage for 5 s, demonstrating a significant advance in technological performances compared to previous conventional actuators. To illustrate their great potential usage, a transparent wiper and a humanoid robot ``hand'' were elaborately designed and fabricated, which initiate a new direction in the development of high-performance invisible robotics and other intelligent applications with transparency. Electronic supplementary information (ESI) available: Video records of the actuation process of the transparent wiper and the grabbing-releasing process of the transparent robot ``hand'', transmittance spectra of the PET and BOPP films, the SEM image showing the thickness of the SACNT sheet, calculation of the curvature, calculation of energy efficiency, experimental results of the control experiment, modeling of the SACNT/PET and PET/BOPP composites and experimental results of the repeatability test. See DOI: 10.1039/c5nr07237a

Patents -- Ivar Giaever (1976)

Science.gov Websites

biological particles, particularly proteins. Such devices comprise a non-transparent surface of metal (solid metal or a non-transparent coating of metal on some different substrate) covered with a thin transparent unaided eye, when the non-transparent surface metal reflects light relatively poorly and is at least

A repeated halving approach to fabricate ultrathin single-walled carbon nanotube films for transparent supercapacitors.

PubMed

Niu, Zhiqiang; Zhou, Weiya; Chen, Jun; Feng, Guoxing; Li, Hong; Hu, Yongsheng; Ma, Wenjun; Dong, Haibo; Li, Jinzhu; Xie, Sishen

2013-02-25

Ultrathin SWCNT transparent and conductive films on flexible and transparent substrates are prepared via repeatedly halving the directly grown SWCNT films and flexible and transparent supercapacitors with excellent performance were fabricated. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Value of Transparency in Distributed Solar PV Markets

DOE Office of Scientific and Technical Information (OSTI.GOV)

OShaughnessy, Eric J; Zamzam, Ahmed S

Market transparency refers to the degree of customer awareness of product options and fair market prices for a given good. In The Value of Transparency in Distributed Solar PV Markets, we use residential solar photovoltaic (PV) quote data to study the value of transparency in distributed solar PV markets. We find that improved market transparency results in lower installation offer prices. Further, the results of this study suggest that PV customers benefit from gaining access to more PV quotes.

Co-Percolating Graphene-Wrapped Silver Nanowire Network for High Performance, Highly Stable, Transparent Conducting Electrodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Ruiyi; Das, Suprem R; Jeong, Changwook

Transparent conducting electrodes (TCEs) require high transparency and low sheet resistance for applications in photovoltaics, photodetectors, flat panel displays, touch screen devices, and imagers. Indium tin oxide (ITO), or other transparent conductive oxides, have been used, and provide a baseline sheet resistance (RS) vs. transparency (T) relationship. Several alternative material systems have been investigated. The development of high-performance hybrid structures provides a route towards robust, scalable and low-cost approaches for realizing high-performance TCE.

DOD Financial Management: Actions Under Way Need to Be Successfully Completed to Address Long-standing Funds Control Weaknesses

DTIC Science & Technology

2014-04-01

FISCAM Federal Information System Controls Audit Manual FMFIA Federal Managers’ Financial Integrity Act FMR Financial Management Regulation GAAP ...rules are incorporated into generally accepted accounting principles ( GAAP ) for the federal government. For additional information on the two methods of...to hold executive branch officials accountable for proper use of budgetary resources, and to ensure proper stewardship and transparency of the use

District of Columbia Charter Schools: Criteria for Awarding School Buildings to Charter Schools Needs Additional Transparency. Report to Congressional Committees. GAO-11-263

ERIC Educational Resources Information Center

Scott, George A.

2011-01-01

Almost 40 percent of all public school students in the District of Columbia (D.C. or District) were enrolled in charter schools in the 2010-11 school year. The D.C. School Reform Act established the Public Charter School Board (PCSB) for the purpose of authorizing and overseeing charter schools. Congress required GAO (US Government Accountability…

Adaptive Multilevel Middleware for Object Systems

DTIC Science & Technology

2006-12-01

the system at the system-call level or using the CORBA-standard Extensible Transport Framework ( ETF ). Transparent insertion is highly desirable from an...often as it needs to. This is remedied by using the real-time scheduling class in a stock Linux kernel. We used schedsetscheduler system call (with...real-time scheduling class (SCHEDFIFO) for all the ML-NFD programs, later experiments with CPU load indicate that a stock Linux kernel is not

Ballistic Protection

DTIC Science & Technology

2011-06-14

ground vehicle Program Management (PM) needs. Base Armor • Small Arms/Frag Opaque B-kits • Medium Cal/Frag Opaque B-kits • Transparent Armor Appliqué...packaged/mounted on a vehicle -representative structure and after introducing relevant environments and relevant threat engagements. Yes 4 MIL-STD 810...Contamination by Fluids • Solar Radiation • Rain • Humidity • Salt Fog • Sand & Dust • Acidic Atmosphere • Vibration • Shock • Fire, Smoke & Toxicity ATPD

Defense Nuclear Facilities Safety Board: Improvements Needed to Strengthen Internal Control and Promote Transparency

DTIC Science & Technology

2015-01-01

results of those steps. GAO reviewed relevant federal laws, regulations , and guidance; analyzed DNFSB documents, including records of internal...agencies’ regulations on Sunshine Act meetings.11 We also interviewed a representative of the Sunlight Foundation, an organization focused on...Secretary’s role as operator and regulator of DOE’s defense nuclear facilities—to ensure adequate protection of public health and safety at these

Methods for Aircraft State and Parameter Identification

DTIC Science & Technology

1975-05-01

fast heat exchange with the air. The isolation of the flask was improved by plastic foam. See Fig. 5. A small electric heater mounted inside the...flight tests is necessary to have a check on possible changes in the caracteristics of the transducers. If Kalman filtering or corresponding techniques...negates the need for transparent plastic overlays of the flight data. thereby eliminating the coneiderable amount of parallax and distortion which is

The need for transparency and reproducibility in documenting values for regulatory decision making and evaluating causality: The example of formaldehyde.

PubMed

Van Landingham, Cynthia; Mundt, Kenneth A; Allen, Bruce C; Gentry, P Robinan

2016-11-01

Reproducibility and transparency in scientific reporting is paramount to advancing science and providing the foundation required for sound regulation. Recent examples demonstrate that pivotal scientific findings cannot be replicated, due to poor documentation or methodological bias, sparking debate across scientific and regulatory communities. However, there is general agreement that improvements in communicating and documenting research and risk assessment methods are needed. In the case of formaldehyde, the peer-review conducted by a National Academy of Sciences (NAS) Committee questioned the approaches used by the Integrated Risk Information System (IRIS) in developing draft unit risk values. Using the original data from the key study (Beane Freeman et al., 2009) and documentation provided in the draft IRIS profile, we attempted to duplicate the reported inhalation unit risk values and address the NAS Committee's questions regarding application of the appropriate dose-response model. Overall, documentation of the methods lacked sufficient detail to allow for replication of the unit risk estimates, specifically for Hodgkin lymphoma and leukemias, the key systemic endpoints selected by IRIS. The lack of apparent exposure-response relationships for selected endpoints raises the question whether quantitative analyses are appropriate for these endpoints, and if so, how results are to be interpreted. Copyright © 2016. Published by Elsevier Inc.

Hazard characterization and management of tetramethyl tin in the production of photovoltaic cell transparent conductive oxide layers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalb, P.D.; Moskowitz, P.D.

1988-01-01

Tetramethyl tin (TMT) has been used by the photovoltaics industry to prepare transparent conductive oxide films on glass. Significant health hazards, however may be associated with the use of TMT. Short-term exposures to TMT vapors in excess of accepted exposure limits can produce a range of physiological symptoms. Although less is known about the hazards from prolonged exposure to low levels of TMT, some studies suggest that effects are both cumulative and persistent. TMT also is highly flammable and emits toxic fumes on decomposition. In an occupational setting, workers may be routinely or accidentally exposed to TMT liquids or vapors.more » Approaches for controlling these occupational hazards are described. Analysis suggests that routine emissions from large scale manufacturing facilities using TMT will need to be reduced by approximately 90% to comply with toxic gas containment guidelines to protect public health. Thermal afterburners combined with particle filtration may be used to meet these guidelines. Accidental release of the total inventory of TMT at a large-scale plant may present hazards to individuals living about 1 km from the facility's boundary. Because of these hazards, strategies to prevent in-plant release coupled with community emergency response programs are needed. 32 refs., 2 figs., 4 tabs.« less

Hazardous characterization and management of tetramethyl tin in the production of photovoltaic cell transparent conductive oxide layers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalb, P.D.; Moskowitz, P.D.

1987-08-01

Tetramethyl tin (TMT) has been used by the photovoltaics industry to prepare transparent conductive oxide films on glass. Significant health hazards, however may be associated with the use of TMT. Short-term exposures to TMT vapors in excess of accepted exposure limits can produce a range of physiological symptoms. Although less is known about the hazards from prolonged exposure to low levels of TMT, some studies suggest that effects are both cumulative and persistent. TMT also is highly flammable and emits toxic fumes on decomposition. In an occupational setting, workers may be routinely or accidentally exposed to TMT liquids or vapors.more » Approaches for controlling these occupational hazards are described. Analysis suggests that routine emissions from large scale manufacturing facilities using TMT will need to be reduced by approximately 90% to comply with toxic gas containment guidelines to protect public health. Thermal afterburners combined with particle filtration may be used to meet these guidelines. Accidental release of the total inventory of TMT at a large-scale plant may present hazards to individuals living about 1 km from the facility's boundary. Because of these hazards, strategies to prevent in-plant release coupled with community emergency response programs are needed. 36 refs., 3 figs., 6 tabs.« less

Confidence in public institutions: A focus group study on views on the Swedish Social Insurance Agency.

PubMed

Holmgren, K; Rosstorp, F; Rohdén, H

2016-09-27

From a public health perspective among the working population, it is very important that confidence in the welfare system is high, ensuring the citizens economic security and protecting them from economic stress when falling ill. The aim of this study was to explore how people with experience of health insurance perceive their confidence in the Swedish Social Insurance Agency (SSIA). Eight focus groups (n = 41) were conducted and each group met on one occasion. The participants described a systemic change in the work of the SSIA where the rule-of-law was disregarded, with arbitrary assessment, and no transparency. The reception by the SSIA shaped the image of the SSIA. The participants described vulnerability in relation to the SSIA. They felt mistrusted, which left a feeling of impotence that worsened their health. Experiencing vulnerability left a strong impression and affected the participants' confidence negatively. The following has to be acknowledged to prevent clients from experiencing impaired health, promote return-to-work possibilities, and to push public confidence in the institution in a more positive direction: Politicians and public administrators need to clarify the regulations. The decision-making process needs to be transparent and just. The entire procedure, including continuity as well as a personal, nice reception, has to be ensured.

An open and transparent process to select ELIXIR Node Services as implemented by ELIXIR-UK

PubMed Central

Hancock, John M.; Game, Alf; Ponting, Chris P.; Goble, Carole A.

2017-01-01

ELIXIR is the European infrastructure established specifically for the sharing and sustainability of life science data. To provide up-to-date resources and services, ELIXIR needs to undergo a continuous process of refreshing the services provided by its national Nodes. Here we present the approach taken by ELIXIR-UK to address the advice by the ELIXIR Scientific Advisory Board that Nodes need to develop “ mechanisms to ensure that each Node continues to be representative of the Bioinformatics efforts within the country”. ELIXIR-UK put in place an open and transparent process to identify potential ELIXIR resources within the UK during late 2015 and early to mid-2016. Areas of strategic strength were identified and Expressions of Interest in these priority areas were requested from the UK community. Criteria were established, in discussion with the ELIXIR Hub, and prospective ELIXIR-UK resources were assessed by an independent committee set up by the Node for this purpose. Of 19 resources considered, 14 were judged to be immediately ready to be included in the UK ELIXIR Node’s portfolio. A further five were placed on the Node’s roadmap for future consideration for inclusion. ELIXIR-UK expects to repeat this process regularly to ensure its portfolio continues to reflect its community’s strengths. PMID:28149502

An open and transparent process to select ELIXIR Node Services as implemented by ELIXIR-UK.

PubMed

Hancock, John M; Game, Alf; Ponting, Chris P; Goble, Carole A

2016-01-01

ELIXIR is the European infrastructure established specifically for the sharing and sustainability of life science data. To provide up-to-date resources and services, ELIXIR needs to undergo a continuous process of refreshing the services provided by its national Nodes. Here we present the approach taken by ELIXIR-UK to address the advice by the ELIXIR Scientific Advisory Board that Nodes need to develop " mechanisms to ensure that each Node continues to be representative of the Bioinformatics efforts within the country". ELIXIR-UK put in place an open and transparent process to identify potential ELIXIR resources within the UK during late 2015 and early to mid-2016. Areas of strategic strength were identified and Expressions of Interest in these priority areas were requested from the UK community. Criteria were established, in discussion with the ELIXIR Hub, and prospective ELIXIR-UK resources were assessed by an independent committee set up by the Node for this purpose. Of 19 resources considered, 14 were judged to be immediately ready to be included in the UK ELIXIR Node's portfolio. A further five were placed on the Node's roadmap for future consideration for inclusion. ELIXIR-UK expects to repeat this process regularly to ensure its portfolio continues to reflect its community's strengths.

Transparent, conformable, active multielectrode array using organic electrochemical transistors.

PubMed

Lee, Wonryung; Kim, Dongmin; Matsuhisa, Naoji; Nagase, Masae; Sekino, Masaki; Malliaras, George G; Yokota, Tomoyuki; Someya, Takao

2017-10-03

Mechanically flexible active multielectrode arrays (MEA) have been developed for local signal amplification and high spatial resolution. However, their opaqueness limited optical observation and light stimulation during use. Here, we show a transparent, ultraflexible, and active MEA, which consists of transparent organic electrochemical transistors (OECTs) and transparent Au grid wirings. The transparent OECT is made of Au grid electrodes and has shown comparable performance with OECTs with nontransparent electrodes/wirings. The transparent active MEA realizes the spatial mapping of electrocorticogram electrical signals from an optogenetic rat with 1-mm spacing and shows lower light artifacts than noise level. Our active MEA would open up the possibility of precise investigation of a neural network system with direct light stimulation.

Fabrication of fully transparent nanowire transistors for transparent and flexible electronics

NASA Astrophysics Data System (ADS)

Ju, Sanghyun; Facchetti, Antonio; Xuan, Yi; Liu, Jun; Ishikawa, Fumiaki; Ye, Peide; Zhou, Chongwu; Marks, Tobin J.; Janes, David B.

2007-06-01

The development of optically transparent and mechanically flexible electronic circuitry is an essential step in the effort to develop next-generation display technologies, including `see-through' and conformable products. Nanowire transistors (NWTs) are of particular interest for future display devices because of their high carrier mobilities compared with bulk or thin-film transistors made from the same materials, the prospect of processing at low temperatures compatible with plastic substrates, as well as their optical transparency and inherent mechanical flexibility. Here we report fully transparent In2O3 and ZnO NWTs fabricated on both glass and flexible plastic substrates, exhibiting high-performance n-type transistor characteristics with ~82% optical transparency. These NWTs should be attractive as pixel-switching and driving transistors in active-matrix organic light-emitting diode (AMOLED) displays. The transparency of the entire pixel area should significantly enhance aperture ratio efficiency in active-matrix arrays and thus substantially decrease power consumption.

Fabrication of fully transparent nanowire transistors for transparent and flexible electronics.

PubMed

Ju, Sanghyun; Facchetti, Antonio; Xuan, Yi; Liu, Jun; Ishikawa, Fumiaki; Ye, Peide; Zhou, Chongwu; Marks, Tobin J; Janes, David B

2007-06-01

The development of optically transparent and mechanically flexible electronic circuitry is an essential step in the effort to develop next-generation display technologies, including 'see-through' and conformable products. Nanowire transistors (NWTs) are of particular interest for future display devices because of their high carrier mobilities compared with bulk or thin-film transistors made from the same materials, the prospect of processing at low temperatures compatible with plastic substrates, as well as their optical transparency and inherent mechanical flexibility. Here we report fully transparent In(2)O(3) and ZnO NWTs fabricated on both glass and flexible plastic substrates, exhibiting high-performance n-type transistor characteristics with approximately 82% optical transparency. These NWTs should be attractive as pixel-switching and driving transistors in active-matrix organic light-emitting diode (AMOLED) displays. The transparency of the entire pixel area should significantly enhance aperture ratio efficiency in active-matrix arrays and thus substantially decrease power consumption.

Research implications of science-informed, value-based decision making.

PubMed

Dowie, Jack

2004-01-01

In 'Hard' science, scientists correctly operate as the 'guardians of certainty', using hypothesis testing formulations and value judgements about error rates and time discounting that make classical inferential methods appropriate. But these methods can neither generate most of the inputs needed by decision makers in their time frame, nor generate them in a form that allows them to be integrated into the decision in an analytically coherent and transparent way. The need for transparent accountability in public decision making under uncertainty and value conflict means the analytical coherence provided by the stochastic Bayesian decision analytic approach, drawing on the outputs of Bayesian science, is needed. If scientific researchers are to play the role they should be playing in informing value-based decision making, they need to see themselves also as 'guardians of uncertainty', ensuring that the best possible current posterior distributions on relevant parameters are made available for decision making, irrespective of the state of the certainty-seeking research. The paper distinguishes the actors employing different technologies in terms of the focus of the technology (knowledge, values, choice); the 'home base' mode of their activity on the cognitive continuum of varying analysis-to-intuition ratios; and the underlying value judgements of the activity (especially error loss functions and time discount rates). Those who propose any principle of decision making other than the banal 'Best Principle', including the 'Precautionary Principle', are properly interpreted as advocates seeking to have their own value judgements and preferences regarding mode location apply. The task for accountable decision makers, and their supporting technologists, is to determine the best course of action under the universal conditions of uncertainty and value difference/conflict.

Monitoring and verification R&D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pilat, Joseph F; Budlong - Sylvester, Kory W; Fearey, Bryan L

2011-01-01

The 2010 Nuclear Posture Review (NPR) report outlined the Administration's approach to promoting the agenda put forward by President Obama in Prague on April 5, 2009. The NPR calls for a national monitoring and verification R&D program to meet future challenges arising from the Administration's nonproliferation, arms control and disarmament agenda. Verification of a follow-on to New START could have to address warheads and possibly components along with delivery capabilities. Deeper cuts and disarmament would need to address all of these elements along with nuclear weapon testing, nuclear material and weapon production facilities, virtual capabilities from old weapon and existingmore » energy programs and undeclared capabilities. We only know how to address some elements of these challenges today, and the requirements may be more rigorous in the context of deeper cuts as well as disarmament. Moreover, there is a critical need for multiple options to sensitive problems and to address other challenges. There will be other verification challenges in a world of deeper cuts and disarmament, some of which we are already facing. At some point, if the reductions process is progressing, uncertainties about past nuclear materials and weapons production will have to be addressed. IAEA safeguards will need to continue to evolve to meet current and future challenges, and to take advantage of new technologies and approaches. Transparency/verification of nuclear and dual-use exports will also have to be addressed, and there will be a need to make nonproliferation measures more watertight and transparent. In this context, and recognizing we will face all of these challenges even if disarmament is not achieved, this paper will explore possible agreements and arrangements; verification challenges; gaps in monitoring and verification technologies and approaches; and the R&D required to address these gaps and other monitoring and verification challenges.« less

Soils. Transparency Masters.

ERIC Educational Resources Information Center

Clemson Univ., SC. Vocational Education Media Center.

This document is a collection of 43 overhead transparency masters to be used as teaching aids in a course of study involving soils such as geology, agronomy, hydrology, earth science, or land use study. Some transparencies are in color. Selected titles of transparencies may give the reader a better understanding of the graphic content. Titles are:…

Thermal modifications of root transparency and implications for aging: a pilot study.

PubMed

Gibelli, Daniele; De Angelis, Danilo; Rossetti, Francesca; Cappella, Annalisa; Frustaci, Michela; Magli, Francesca; Mazzarelli, Debora; Mazzucchi, Alessandra; Cattaneo, Cristina

2014-01-01

Root transparency has proven to be related to age and has been considered by different odontological methods for age estimation. Very little is known concerning possible variations of root transparency with heat, although the applicability of the method to burnt remains depends on the possible modifications of this specific variable. This pilot study presents the results of an experiment performed on 105 teeth obtained from dental patients and autopsy material, heated in an industrial oven at 50°C, 100°C, 150°C and 200°C. Root transparency was measured before and after the charring experiment. The heating process proved to radically modify root transparency, which decreased in 20% of samples at 50°C, in 34.6% at 100°C, in 50% at 150°C, in 77% at 200°C. The overall correlation index (CI) between decrease in root transparency and increase in temperature amounted to 0.96. These results show that heat may modify root transparency and suggest caution in using methods based on root transparency for age estimation. © 2013 American Academy of Forensic Sciences.

Studies on kinetics of water quality factors to establish water transparency model in Neijiang River, China.

PubMed

Li, Ronghui; Pan, Wei; Guo, Jinchuan; Pang, Yong; Wu, Jianqiang; Li, Yiping; Pan, Baozhu; Ji, Yong; Ding, Ling

2014-05-01

The basis for submerged plant restoration in surface water is to research the complicated dynamic mechanism of water transparency. In this paper, through the impact factor analysis of water transparency, the suspended sediment, dissolved organic matter, algae were determined as three main impactfactors for water transparency of Neijiang River in Eastern China. And the multiple regression equation of water transparency and sediment concentration, permanganate index, chlorophyll-a concentration was developed. Considering the complicated transport and transformation of suspended sediment, dissolved organic matter and algae, numerical model of them were developed respectively for simulating the dynamic process. Water transparency numerical model was finally developed by coupling the sediment, water quality, and algae model. These results showed that suspended sediment was a key factor influencing water transparency of Neijiang River, the influence of water quality indicated by chemical oxygen demand and algal concentration indicated by chlorophyll a were indeterminate when their concentrations were lower, the influence was more obvious when high concentrations are available, such three factors showed direct influence on water transparency.

Local modulation of double optomechanically induced transparency and amplification.

PubMed

Yang, Q; Hou, B P; Lai, D G

2017-05-01

We consider the probe absorption properties in a mechanically coupled optomechanical system in which the two coupled nanomechanical oscillators are driven by the time-dependent forces, respectively. It is found that the mechanical interaction splits the transparency window for a usual single-mode optomechanical system into two parts and then leads to appearance of the double optomechanically induced transparency. The distance between the two transparency positions (the frequency for the maximal transparency) is determined by the mechanical interaction amplitude. This can be explained by using optomechanical dressed-mode picture which is analogue to the interacting dark resonances in coherent atoms. When the mechanical resonators are driven by the external forces, the transparencies in the double-transparency spectrum can be increased into amplifications or be suppressed by tuning the amplitude of the forces. Additionally, it is shown that the double transparencies or the amplifications oscillate with the initial phases of the forces with a period of 2π. These investigations will be useful for more flexible controllability of multi-channel optical communication based on the optomechanical systems.

Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications

PubMed Central

Fu, Fan; Feurer, Thomas; Jäger, Timo; Avancini, Enrico; Bissig, Benjamin; Yoon, Songhak; Buecheler, Stephan; Tiwari, Ayodhya N.

2015-01-01

Semi-transparent perovskite solar cells are highly attractive for a wide range of applications, such as bifacial and tandem solar cells; however, the power conversion efficiency of semi-transparent devices still lags behind due to missing suitable transparent rear electrode or deposition process. Here we report a low-temperature process for efficient semi-transparent planar perovskite solar cells. A hybrid thermal evaporation–spin coating technique is developed to allow the introduction of PCBM in regular device configuration, which facilitates the growth of high-quality absorber, resulting in hysteresis-free devices. We employ high-mobility hydrogenated indium oxide as transparent rear electrode by room-temperature radio-frequency magnetron sputtering, yielding a semi-transparent solar cell with steady-state efficiency of 14.2% along with 72% average transmittance in the near-infrared region. With such semi-transparent devices, we show a substantial power enhancement when operating as bifacial solar cell, and in combination with low-bandgap copper indium gallium diselenide we further demonstrate 20.5% efficiency in four-terminal tandem configuration. PMID:26576667

2009 Annual Health Physics Report for the HEU Transparency Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radev, R

2010-04-14

During the 2009 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. LLNL also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2009, there were 159 person-trips that required dose monitoring of the U.S. monitors. Of the 159 person-trips, 149 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 4 monitoring visits by TMO monitors to facilities other than UEIE and 10 to UEIE itself. LLNL's Hazard Control Departmentmore » laboratories provided the dosimetry services for the HEU Transparency monitors. In 2009, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency Program now has over fifteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.« less

Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fan, Ren-Hao; Peng, Ru-Wen; Huang, Xian-Rong

2015-07-01

In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertzmore » ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies.« less

Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications.

PubMed

Fu, Fan; Feurer, Thomas; Jäger, Timo; Avancini, Enrico; Bissig, Benjamin; Yoon, Songhak; Buecheler, Stephan; Tiwari, Ayodhya N

2015-11-18

Semi-transparent perovskite solar cells are highly attractive for a wide range of applications, such as bifacial and tandem solar cells; however, the power conversion efficiency of semi-transparent devices still lags behind due to missing suitable transparent rear electrode or deposition process. Here we report a low-temperature process for efficient semi-transparent planar perovskite solar cells. A hybrid thermal evaporation-spin coating technique is developed to allow the introduction of PCBM in regular device configuration, which facilitates the growth of high-quality absorber, resulting in hysteresis-free devices. We employ high-mobility hydrogenated indium oxide as transparent rear electrode by room-temperature radio-frequency magnetron sputtering, yielding a semi-transparent solar cell with steady-state efficiency of 14.2% along with 72% average transmittance in the near-infrared region. With such semi-transparent devices, we show a substantial power enhancement when operating as bifacial solar cell, and in combination with low-bandgap copper indium gallium diselenide we further demonstrate 20.5% efficiency in four-terminal tandem configuration.

Transparent actuators and robots based on single-layer superaligned carbon nanotube sheet and polymer composites.

PubMed

Chen, Luzhuo; Weng, Mingcen; Zhang, Wei; Zhou, Zhiwei; Zhou, Yi; Xia, Dan; Li, Jiaxin; Huang, Zhigao; Liu, Changhong; Fan, Shoushan

2016-03-28

Transparent actuators have been attracting emerging interest recently, as they demonstrate potential applications in the fields of invisible robots, tactical displays, variable-focus lenses, and flexible cellular phones. However, previous technologies did not simultaneously realize macroscopic transparent actuators with advantages of large-shape deformation, low-voltage-driven actuation and fast fabrication. Here, we develop a fast approach to fabricate a high-performance transparent actuator based on single-layer superaligned carbon nanotube sheet and polymer composites. Various advantages of single-layer nanotube sheets including high transparency, considerable conductivity, and ultra-thin dimensions together with selected polymer materials completely realize all the above required advantages. Also, this is the first time that a single-layer nanotube sheet has been used to fabricate actuators with high transparency, avoiding the structural damage to the single-layer nanotube sheet. The transparent actuator shows a transmittance of 72% at the wavelength of 550 nm and bends remarkably with a curvature of 0.41 cm(-1) under a DC voltage for 5 s, demonstrating a significant advance in technological performances compared to previous conventional actuators. To illustrate their great potential usage, a transparent wiper and a humanoid robot "hand" were elaborately designed and fabricated, which initiate a new direction in the development of high-performance invisible robotics and other intelligent applications with transparency.

Water Transparency Drives Intra-Population Divergence in Eurasian Perch (Perca fluviatilis)

PubMed Central

Bartels, Pia; Hirsch, Philipp E.; Svanbäck, Richard; Eklöv, Peter

2012-01-01

Trait combinations that lead to a higher efficiency in resource utilization are important drivers of divergent natural selection and adaptive radiation. However, variation in environmental features might constrain foraging in complex ways and therefore impede the exploitation of critical resources. We tested the effect of water transparency on intra-population divergence in morphology of Eurasian perch (Perca fluviatilis) across seven lakes in central Sweden. Morphological divergence between near-shore littoral and open-water pelagic perch substantially increased with increasing water transparency. Reliance on littoral resources increased strongly with increasing water transparency in littoral populations, whereas littoral reliance was not affected by water transparency in pelagic populations. Despite the similar reliance on pelagic resources in pelagic populations along the water transparency gradient, the utilization of particular pelagic prey items differed with variation in water transparency in pelagic populations. Pelagic perch utilized cladocerans in lakes with high water transparency and copepods in lakes with low water transparency. We suggest that under impaired visual conditions low utilization of littoral resources by littoral perch and utilization of evasive copepods by pelagic perch may lead to changes in morphology. Our findings indicate that visual conditions can affect population divergence in predator populations through their effects on resource utilization. PMID:22912895

Hybrid display of static image and aerial image by use of transparent acrylic cubes and retro-reflectors

NASA Astrophysics Data System (ADS)

Morita, Shogo; Ito, Shusei; Yamamoto, Hirotsugu

2017-02-01

Aerial display can form transparent floating screen in the mid-air and expected to provide aerial floating signage. We have proposed aerial imaging by retro-reflection (AIRR) to form a large aerial LED screen. However, luminance of aerial image is not sufficiently high so as to be used for signage under broad daylight. The purpose of this paper is to propose a novel aerial display scheme that features hybrid display of two different types of images. Under daylight, signs made of cubes are visible. At night, or under dark lighting situation, aerial LED signs become visible. Our proposed hybrid display is composed of an LED sign, a beam splitter, retro-reflectors, and transparent acrylic cubes. Aerial LED sign is formed with AIRR. Furthermore, we place transparent acrylic cubes on the beam splitter. Light from the LED sign enters transparent acrylic cubes, reflects twice in the transparent acrylic cubes, exit and converge to planesymmetrical position with light source regarding the cube array. Thus, transparent acrylic cubes also form the real image of the source LED sign. Now, we form a sign with the transparent acrylic cubes so that this cube-based sign is apparent under daylight. We have developed a proto-type display by use of 1-cm transparent cubes and retro-reflective sheeting and successfully confirmed aerial image forming with AIRR and transparent cubes as well as cube-based sign under daylight.

Highly transparent supercapacitors based on ZnO/MnO2 nanostructures.

PubMed

Borysiewicz, M A; Ekielski, M; Ogorzałek, Z; Wzorek, M; Kaczmarski, J; Wojciechowski, T

2017-06-08

The recent rapid development of transparent electronics, notably displays and control circuits, requires the development of highly transparent energy storage devices, such as supercapacitors. The devices reported to date utilize carbon-based electrodes for high performance, however at the cost of their low transparency around 50%, insufficient for real transparent devices. To overcome this obstacle, in this communication highly transparent supercapacitors were fabricated based on ZnO/MnO 2 nanostructured electrodes. ZnO served as an intrinsically transparent skeleton for increasing the electrode surface, while MnO 2 nanoparticles were applied for high capacitance. Two MnO 2 synthesis routes were followed, based on the reaction of KMnO 4 with Mn(Ac) 2 and PAH, leading to the synthesis of β-MnO 2 with minority α-MnO 2 nanoparticles and amorphous MnO 2 with embedded β-MnO 2 , respectively. The devices based on such electrodes showed high capacitances of 2.6 mF cm -2 and 1.6 mF cm -2 , respectively, at a scan rate of 1 mV s -1 and capacitances of 104 μF cm -2 and 204 μF cm -2 at a very high rate of 1 V s -1 , not studied for transparent supercapacitors previously. Additionally, the Mn(Ac) 2 devices exhibited very high transparencies of 86% vs. air, far superior to other transparent energy storage devices reported with similar charge storage properties. This high device performance was achieved with a non-acidic LiCl gel electrolyte, reducing corrosion and handling risks associated with conventional highly concentrated acidic electrolytes, enabling applications in safe, wearable, transparent devices.

Seasonal variation of limnological features and trophic state index of two oligotrophic reservoirs of southeast Brazil.

PubMed

Oliveira, S A; Bicudo, C E M

2017-01-01

Limnological features of two reservoirs were studied in dry (August 2013) and rainy (January 2014) periods to evaluate the water quality that supply the city of Guarulhos, southeast Brazil. Water samples were collected in three depths and the following characteristics were measured: alkalinity, dissolved O2, free and total CO2, HCO3, soluble reactive silica, dissolved and total nitrogen and phosphorus, and chlorophyll-a. Water transparency was also measured and temperature, pH and electric conductivity profiles were obtained. Great seasonal and low spatial variability of the water characteristics occurred in the reservoirs. High values of water transparency, free CO2 availability, and low of pH, soluble reactive silica and total and dissolved nutrients values were recorded at the dry period, and different conditions were found at the rainy season. The two reservoirs were characterized by low nutrients, chlorophyll-a and turbidity, and high transparency, these features being typical of oligotrophic systems. The two reservoirs still remain under low anthropogenic impact conditions, and are presently considered reference systems for the SPMR, São Paulo Metropolitan Region. The need for actions that will reduce the input of nutrients from the neighboring cities and the main tributaries of the hydrographic basin is emphasized to maintain the ecological quality of the reservoirs and their reference conditions among the SPRM reservoirs.

Bridging the gap between evidence and policy for infectious diseases: How models can aid public health decision-making.

PubMed

Knight, Gwenan M; Dharan, Nila J; Fox, Gregory J; Stennis, Natalie; Zwerling, Alice; Khurana, Renuka; Dowdy, David W

2016-01-01

The dominant approach to decision-making in public health policy for infectious diseases relies heavily on expert opinion, which often applies empirical evidence to policy questions in a manner that is neither systematic nor transparent. Although systematic reviews are frequently commissioned to inform specific components of policy (such as efficacy), the same process is rarely applied to the full decision-making process. Mathematical models provide a mechanism through which empirical evidence can be methodically and transparently integrated to address such questions. However, such models are often considered difficult to interpret. In addition, models provide estimates that need to be iteratively re-evaluated as new data or considerations arise. Using the case study of a novel diagnostic for tuberculosis, a framework for improved collaboration between public health decision-makers and mathematical modellers that could lead to more transparent and evidence-driven policy decisions for infectious diseases in the future is proposed. The framework proposes that policymakers should establish long-term collaborations with modellers to address key questions, and that modellers should strive to provide clear explanations of the uncertainty of model structure and outputs. Doing so will improve the applicability of models and clarify their limitations when used to inform real-world public health policy decisions. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Flexible electronics-compatible non-enzymatic glucose sensing via transparent CuO nanowire networks on PET films

NASA Astrophysics Data System (ADS)

Bell, Caroline; Nammari, Abdullah; Uttamchandani, Pranay; Rai, Amit; Shah, Pujan; Moore, Arden L.

2017-06-01

Diabetic individuals need simple, accurate, and cost effective means by which to independently assess their glucose levels in a non-invasive way. In this work, a sensor based on randomly oriented CuO nanowire networks supported by a polyethylene terephthalate thin film is evaluated as a flexible, transparent, non-enzymatic glucose sensing system analogous to those envisioned for future wearable diagnostic devices. The amperometric sensing characteristics of this type of device architecture are evaluated both before and after bending, with the system’s glucose response, sensitivity, lower limit of detection, and effect of applied bias being experimentally determined. The obtained data shows that the sensor is capable of measuring changes in glucose levels within a physiologically relevant range (0-12 mM glucose) and at lower limits of detection (0.05 mM glucose at +0.6 V bias) consistent with patient tears and saliva. Unlike existing studies utilizing a conductive backing layer or macroscopic electrode setup, this sensor demonstrates a percolation network-like trend of current versus glucose concentration. In this implementation, controlling the architectural details of the CuO nanowire network could conceivably allow the sensor’s sensitivity and optimal sensing range to be tuned. Overall, this work shows that integrating CuO nanowires into a sensor architecture compatible with transparent, flexible electronics is a promising avenue to realizing next generation wearable non-enzymatic glucose diagnostic devices.

Quantitative phase imaging by wide field lensless digital holographic microscope

NASA Astrophysics Data System (ADS)

Adinda-Ougba, A.; Koukourakis, N.; Essaidi, A.; Ger­hardt, N. C.; Hofmann, M. R.

2015-05-01

Wide field, lensless microscopes have been developed for telemedicine and for resource limited setting [1]. They are based on in-line digital holography which is capable to provide amplitude and phase information resulting from numerical reconstruction. The phase information enables achieving axial resolution in the nanometer range. Hence, such microscopes provide a powerful tool to determine three-dimensional topologies of microstructures. In this contribution, a compact, low-cost, wide field, lensless microscope is presented, which is capable of providing topological profiles of microstructures in transparent material. Our setup consist only of two main components: a CMOSsensor chip and a laser diode without any need of a pinhole. We use this very simple setup to record holograms of microobjects. A wide field of view of ~24 mm², and a lateral resolution of ~2 μm are achieved. Moreover, amplitude and phase information are obtained from the numerical reconstruction of the holograms using a phase retrieval algorithm together with the angular spectrum propagation method. Topographic information of highly transparent micro-objects is obtained from the phase data. We evaluate our system by recording holograms of lines with different depths written by a focused laser beam. A reliable characterization of laser written microstructures is crucial for their functionality. Our results show that this system is valuable for determination of topological profiles of microstructures in transparent material.

Automated methods of tree boundary extraction and foliage transparency estimation from digital imagery

Treesearch

Sang-Mook Lee; Neil A. Clark; Philip A. Araman

2003-01-01

Foliage transparency in trees is an important indicator for forest health assessment. This paper helps advance transparency measurement research by presenting methods of automatic tree boundary extraction and foliage transparency estimation from digital images taken from the ground of open grown trees.Extraction of proper boundaries of tree crowns is the...

Missile Defense: European Phased Adaptive Approach Acquisitions Face Synchronization, Transparency, and Accountability Challenges

DTIC Science & Technology

2010-12-21

House of Representatives Subject: Missile Defense: European Phased Adaptive Approach Acquisitions Face Synchronization , Transparency, and...TITLE AND SUBTITLE Missile Defense: European Phased Adaptive Approach Acquisitions Face Synchronization , Transparency, and Accountability...However, we found that DOD has not fully implemented a management process that synchronizes EPAA acquisition activities and ensures transparency and

Solar energy thermalization and storage device

DOEpatents

McClelland, John F.

1981-09-01

A passive solar thermalization and thermal energy storage assembly which is visually transparent. The assembly consists of two substantial parallel, transparent wall members mounted in a rectangular support frame to form a liquid-tight chamber. A semitransparent thermalization plate is located in the chamber, substantially paralled to and about equidistant from the transparent wall members to thermalize solar radiation which is stored in a transparent thermal energy storage liquid which fills the chamber. A number of the devices, as modules, can be stacked together to construct a visually transparent, thermal storage wall for passive solar-heated buildings.

Plasmonic transparent conductors

NASA Astrophysics Data System (ADS)

Liapis, Andreas C.; Sfeir, Matthew Y.; Black, Charles T.

2016-09-01

Many of today's technological applications, such as solar cells, light-emitting diodes, displays, and touch screens, require materials that are simultaneously optically transparent and electrically conducting. Here we explore transparent conductors based on the excitation of surface plasmons in nanostructured metal films. We measure both the optical and electrical properties of films perforated with nanometer-scale features and optimize the design parameters in order to maximize optical transmission without sacrificing electrical conductivity. We demonstrate that plasmonic transparent conductors can out-perform indium tin oxide in terms of both their transparency and their conductivity.

Transparent, conformable, active multielectrode array using organic electrochemical transistors

PubMed Central

Lee, Wonryung; Kim, Dongmin; Matsuhisa, Naoji; Nagase, Masae; Sekino, Masaki; Malliaras, George G.; Yokota, Tomoyuki; Someya, Takao

2017-01-01

Mechanically flexible active multielectrode arrays (MEA) have been developed for local signal amplification and high spatial resolution. However, their opaqueness limited optical observation and light stimulation during use. Here, we show a transparent, ultraflexible, and active MEA, which consists of transparent organic electrochemical transistors (OECTs) and transparent Au grid wirings. The transparent OECT is made of Au grid electrodes and has shown comparable performance with OECTs with nontransparent electrodes/wirings. The transparent active MEA realizes the spatial mapping of electrocorticogram electrical signals from an optogenetic rat with 1-mm spacing and shows lower light artifacts than noise level. Our active MEA would open up the possibility of precise investigation of a neural network system with direct light stimulation. PMID:28923928

A study of organizational versus individual needs related to recruitment, deployment and promotion of doctors working in the government health system in Odisha state, India.

PubMed

Kadam, Shridhar; Nallala, Srinivas; Zodpey, Sanjay; Pati, Sanghamitra; Hussain, Mohammad Akhtar; Chauhan, Abhimanyu Singh; Das, Sovesh; Martineau, Tim

2016-02-24

An effective health workforce is essential for achieving health-related new Sustainable Development Goals. Odisha, one of the states in India with low health indicators, faces challenges in recruiting and retaining health staff in the public sector, especially doctors. Recruitment, deployment and career progression play an important role in attracting and retaining doctors. We examined the policies on recruitment, deployment and promotion for doctors in the state and how these policies were perceived to be implemented. We undertook document review and four key informant interviews with senior state-level officials to delineate the policies for recruitment, deployment and promotion. We conducted 90 in-depth interviews, 86 with doctors from six districts and four at the state level to explore the perceptions of doctors about these policies. Despite the efforts by the Government of Odisha through regular recruitments, a quarter of the posts of doctors was vacant across all institutional levels in the state. The majority of doctors interviewed were unaware of existing government rules for placement, transfer and promotion. In addition, there were no explicit rules followed in placement and transfer. More than half (57%) of the doctors interviewed from well-accessible areas had never worked in the identified hard-to-reach areas in spite of having regulatory and incentive mechanisms. The average length of service before the first promotion was 26 (±3.5) years. The doctors expressed satisfaction with the recruitment process. They stated concerns over delayed first promotion, non-transparent deployment policies and ineffective incentive system. Almost all doctors suggested having time-bound and transparent policies. Adequate and appropriate deployment of doctors is a challenge for the government as it has to align the individual aspirations of employees with organizational needs. Explicit rules for human resource management coupled with transparency in implementation can improve governance and build trust among doctors which would encourage them to work in the public sector.

[Good practice guidelines for health information].

PubMed

2016-01-01

Evidence-based health information is distinguished by the provision of an unbiased and trustworthy description of the current state of medical knowledge. It enables people to learn more about health and disease, and to make health-related decisions - on their own or together with others - reflecting their attitudes and lifestyle. To adequately serve this purpose, health information must be evidence-based. A working group from the German Network for Evidence-based Medicine (Deutsches Netzwerk Evidenzbasierte Medizin) has developed a first draft of good practice guidelines for health information (Gute Praxis Gesundheitsinformation) with the aim of providing support for authors and publishers of evidence-based health information. The group included researchers, patient representatives, journalists and developers of health information. The criteria for evidence-based health information were developed and agreed upon within this author group, and then made available for public comment. All submitted comments were documented and assessed regarding the need to revise or amend the draft. Changes were subsequently implemented following approval by the author group. Gute Praxis Gesundheitsinformation calls for a transparent methodological approach in the development of health information. To achieve this, evidence-based information must be based on (a) a systematic literature search, (b) a justified selection of evidence, (c) unbiased reporting of relevant results, (d) appropriate factual and linguistic communication of uncertainties, (e) either avoidance of any direct recommendations or a strict division between the reporting of results and the derivation of recommendations, (f) the consideration of current evidence on the communication of figures, risks and probabilities, and (g) transparent information about the authors and publishers of the health information, including their funding sources. Gute Praxis Gesundheitsinformation lists a total of 16 aspects to be addressed in methods papers. Gute Praxis Gesundheitsinformation is a tool that puts forward methodological aspects to be considered when developing health information. In order to be transparent, descriptions of the underlying methods and processes need to be published in easily accessible methods papers describing the general procedure. Copyright © 2015. Published by Elsevier GmbH.

The effects of mechanical transparency on adjustment to a complex visuomotor transformation at early and late working age.

PubMed

Heuer, Herbert; Hegele, Mathias

2010-12-01

Mechanical tools are transparent in the sense that their input-output relations can be derived from their perceptible characteristics. Modern technology creates more and more tools that lack mechanical transparency, such as in the control of the position of a cursor by means of a computer mouse or some other input device. We inquired whether an enhancement of transparency by means of presenting the shaft of a virtual sliding lever, which governed the transformation of hand position into cursor position, supports performance of aimed cursor movement and the acquisition of an internal model of the transformation in both younger and older adults. Enhanced transparency resulted in an improvement of visual closed-loop control in terms of movement time and curvature of cursor paths. The movement-time improvement was more pronounced at older working age than at younger working age, so that the enhancement of transparency can serve as a means to mitigate age-related declines in performance. Benefits for the acquisition of an internal model of the transformation and of explicit knowledge were absent. Thus, open-loop control in this task did not profit from enhanced mechanical transparency. These findings strongly suggest that environmental support of transparency of the effects of input devices on controlled systems might be a powerful tool to support older users. Enhanced transparency may also improve simulator-based training by increasing motivation, even if training benefits do not transfer to situations without enhanced transparency. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

Nanostructured p-type semiconducting transparent oxides: promising materials for nano-active devices and the emerging field of "transparent nanoelectronics".

PubMed

Banerjee, Arghya; Chattopadhyay, Kalyan K

2008-01-01

Transparent conducting oxides (TCO) with p-type semiconductivity have recently gained renewed interest for the fabrication of all-oxide transparent junctions, having potential applications in the emerging field of 'Transparent' or 'Invisible Electronics'. This kind of transparent junctions can be used as a "functional" window, which will transmit visible portion of solar radiation, but generates electricity by the absorption of the UV part. Therefore, these devices can be used as UV shield as well as UV cells. In this report, a brief review on the research activities on various p-TCO materials is furnished along-with the fabrication of different transparent p-n homojunction, heterojunction and field-effect transistors. Also the reason behind the difficulties in obtaining p-TCO materials and possible solutions are discussed in details. Considerable attention is given in describing the various patent generations on the field of p-TCO materials as well as transparent p-n junction diodes and light emitting devices. Also, most importantly, a detailed review and patenting activities on the nanocrystalline p-TCO materials and transparent nano-active device fabrication are furnished with considerable attention. And finally, a systematic description on the fabrication and characterization of nanocrystalline, p-type transparent conducting CuAlO(2) thin film, deposited by cost-effective low-temperature DC sputtering technique, by our group, is furnished in details. These p-TCO micro/nano-materials have wide range of applications in the field of optoelectronics, nanoelectronics, space sciences, field-emission displays, thermoelectric converters and sensing devices.

Highly Transparent and Self-Extinguishing Nanofibrillated Cellulose-Monolayer Clay Nanoplatelet Hybrid Films.

PubMed

Ming, Siyi; Chen, Gang; He, Jiahao; Kuang, Yudi; Liu, Yu; Tao, Ruiqiang; Ning, Honglong; Zhu, Penghui; Liu, Yingyao; Fang, Zhiqiang

2017-08-29

A viable solution toward "green" optoelectronics is rooted in our ability to fabricate optoelectronics on transparent nanofibrillated cellulose (NFC) film substrates. However, the flammability of transparent NFC film poses a severe fire hazard in optoelectronic devices. Despite many efforts toward enhancing the fire-retardant features of transparent NFC film, making NFC film fire-retardant while maintaining its high transparency (≥90%) remains an ambitious objective. Herein, we combine NFC with NFC-dispersed monolayer clay nanoplatelets as a fire retardant to prepare highly transparent NFC-monolayer clay nanoplatelet hybrid films with a superb self-extinguishing behavior. Homogeneous and stable monolayer clay nanoplatelet dispersion was initially obtained by using NFC as a green dispersing agent with the assistance of ultrasonication and then used to blend with NFC to prepare highly transparent and self-extinguishing hybrid films by a water evaporation-induced self-assembly process. As the content of monolayer clay nanoplatelets increased from 5 wt % to 50 wt %, the obtained hybrid films presented enhanced self-extinguishing behavior (limiting oxygen index sharply increased from 21% to 96.5%) while retaining a ∼90% transparency at 600 nm. More significantly, the underlying mechanisms for the high transparency and excellent self-extinguishing behavior of these hybrid films with a clay nanoplatelet content of over 30 wt % were unveiled by a series of characterizations such as SEM, XRD, TGA, and limiting oxygen index tester. This work offers an alternative environmentally friendly, self-extinguishing, and highly transparent substrate to next-generation optoelectronics, and is aimed at providing a viable solution to environmental concerns that are caused by ever-increasing electronic waste.

Criterion-free measurement of motion transparency perception at different speeds

PubMed Central

Rocchi, Francesca; Ledgeway, Timothy; Webb, Ben S.

2018-01-01

Transparency perception often occurs when objects within the visual scene partially occlude each other or move at the same time, at different velocities across the same spatial region. Although transparent motion perception has been extensively studied, we still do not understand how the distribution of velocities within a visual scene contribute to transparent perception. Here we use a novel psychophysical procedure to characterize the distribution of velocities in a scene that give rise to transparent motion perception. To prevent participants from adopting a subjective decision criterion when discriminating transparent motion, we used an “odd-one-out,” three-alternative forced-choice procedure. Two intervals contained the standard—a random-dot-kinematogram with dot speeds or directions sampled from a uniform distribution. The other interval contained the comparison—speeds or directions sampled from a distribution with the same range as the standard, but with a notch of different widths removed. Our results suggest that transparent motion perception is driven primarily by relatively slow speeds, and does not emerge when only very fast speeds are present within a visual scene. Transparent perception of moving surfaces is modulated by stimulus-based characteristics, such as the separation between the means of the overlapping distributions or the range of speeds presented within an image. Our work illustrates the utility of using objective, forced-choice methods to reveal the mechanisms underlying motion transparency perception. PMID:29614154

X-ray lithography masking

NASA Technical Reports Server (NTRS)

Smith, Henry I. (Inventor); Lim, Michael (Inventor); Carter, James (Inventor); Schattenburg, Mark (Inventor)

1998-01-01

X-ray masking apparatus includes a frame having a supporting rim surrounding an x-ray transparent region, a thin membrane of hard inorganic x-ray transparent material attached at its periphery to the supporting rim covering the x-ray transparent region and a layer of x-ray opaque material on the thin membrane inside the x-ray transparent region arranged in a pattern to selectively transmit x-ray energy entering the x-ray transparent region through the membrane to a predetermined image plane separated from the layer by the thin membrane. A method of making the masking apparatus includes depositing back and front layers of hard inorganic x-ray transparent material on front and back surfaces of a substrate, depositing back and front layers of reinforcing material on the back and front layers, respectively, of the hard inorganic x-ray transparent material, removing the material including at least a portion of the substrate and the back layers of an inside region adjacent to the front layer of hard inorganic x-ray transparent material, removing a portion of the front layer of reinforcing material opposite the inside region to expose the surface of the front layer of hard inorganic x-ray transparent material separated from the inside region by the latter front layer, and depositing a layer of x-ray opaque material on the surface of the latter front layer adjacent to the inside region.

Policy modeling for industrial energy use

DOE Office of Scientific and Technical Information (OSTI.GOV)

Worrell, Ernst; Park, Hi-Chun; Lee, Sang-Gon

2003-03-01

The international workshop on Policy Modeling for Industrial Energy Use was jointly organized by EETA (Professional Network for Engineering Economic Technology Analysis) and INEDIS (International Network for Energy Demand Analysis in the Industrial Sector). The workshop has helped to layout the needs and challenges to include policy more explicitly in energy-efficiency modeling. The current state-of-the-art models have a proven track record in forecasting future trends under conditions similar to those faced in the recent past. However, the future of energy policy in a climate-restrained world is likely to demand different and additional services to be provided by energy modelers. Inmore » this workshop some of the international models used to make energy consumption forecasts have been discussed as well as innovations to enable the modeling of policy scenarios. This was followed by the discussion of future challenges, new insights in the data needed to determine the inputs into energy model s, and methods to incorporate decision making and policy in the models. Based on the discussion the workshop participants came to the following conclusions and recommendations: Current energy models are already complex, and it is already difficult to collect the model inputs. Hence, new approaches should be transparent and not lead to extremely complex models that try to ''do everything''. The model structure will be determined by the questions that need to be answered. A good understanding of the decision making framework of policy makers and clear communication on the needs are essential to make any future energy modeling effort successful. There is a need to better understand the effects of policy on future energy use, emissions and the economy. To allow the inclusion of policy instruments in models, evaluation of programs and instruments is essential, and need to be included in the policy instrument design. Increased efforts are needed to better understand the effects of innovative (no n-monetary) policy instruments through evaluation and to develop approaches to model both conventional and innovative policies. The explicit modeling of barriers and decision making in the models seems a promising way to enable modeling of conventional and innovative policies. A modular modeling approach is essential to not only provide transparency, but also to use the available resources most effectively and efficiently. Many large models have been developed in the past, but have been abandoned after only brief periods of use. A development path based on modular building blocks needs the establishment of a flexible but uniform modeling framework. The leadership of international agencies and organizations is essential in the establishment of such a framework. A preference is given for ''softlinks'' between different modules and models, to increase transparency and reduce complexity. There is a strong need to improve the efficiency of data collection and interpretation efforts to produce reliable model inputs. The workshop participants support the need for the establishment of an (in-)formal exchanges of information, as well as modeling approaches. The development of an informal network of research institutes and universities to help build a common dataset and exchange ideas on specific areas is proposed. Starting with an exchange of students would be a relative low-cost way to start such collaboration. It would be essential to focus on specific topics. It is also essential to maintain means of regular exchange of ideas between researchers in the different focus points.« less

37 CFR 202.21 - Deposit of identifying material instead of copies.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., transparencies, photostats, drawings, or similar two-dimensional reproductions or renderings of the work, in a... transparencies must be at least 35mm in size and, if such transparencies are 3×3 inches or less, must be fixed in... Office prefers that transparencies larger than 3×3 inches be mounted in a way that facilitates their...

The health care value transparency movement and its implications for radiology.

PubMed

Durand, Daniel J; Narayan, Anand K; Rybicki, Frank J; Burleson, Judy; Nagy, Paul; McGinty, Geraldine; Duszak, Richard

2015-01-01

The US health care system is in the midst of disruptive changes intended to expand access, improve outcomes, and lower costs. As part of this movement, a growing number of stakeholders have advocated dramatically increasing consumer transparency into the quality and price of health care services. The authors review the general movement toward American health care value transparency within the public, private, and nonprofit sectors, with an emphasis on those initiatives most relevant to radiology. They conclude that radiology, along with other "ancillary services," has been a major focus of early efforts to enhance consumer price transparency. By contrast, radiology as a field remains in the "middle of the pack" with regard to quality transparency. There is thus the danger that radiology value transparency in its current form will stimulate primarily price-based competition, erode provider profit margins, and disincentivize quality. The authors conclude with suggested actions radiologists can take to ensure that a more optimal balance is struck between quality transparency and price transparency, one that will enable true value-based competition among radiologists rather than commoditization. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

2011 Annual Health Physics Report for the HEU transparency Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radev, R

2012-04-30

During the 2008 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. They also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2008, there were 158 person-trips that required dose monitoring of the U.S. monitors. Of the 158 person-trips, 148 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 6 monitoring visits by TMO monitors to facilities other than UEIE and 8 to UEIE itself. There were three monitoringmore » visits (source changes) that were back-to-back with a total of 24 monitors. LLNL's Hazard Control Department laboratories provided the dosimetry services for the HEU Transparency monitors. In 2008, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency now has thirteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.« less

2008 Annual Health Physics Report for the HEU Transparency Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radev, R.

2009-03-24

During the 2008 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. They also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2008, there were 158 person-trips that required dose monitoring of the U.S. monitors. Of the 158 person-trips, 148 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 6 monitoring visits by TMO monitors to facilities other than UEIE and 8 to UEIE itself. There were three monitoringmore » visits (source changes) that were back-to-back with a total of 24 monitors. LLNL’s Hazard Control Department laboratories provided the dosimetry services for the HEU Transparency monitors. In 2008, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency now has thirteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.« less

Review of fluorescence guided surgery visualization and overlay techniques

PubMed Central

Elliott, Jonathan T.; Dsouza, Alisha V.; Davis, Scott C.; Olson, Jonathan D.; Paulsen, Keith D.; Roberts, David W.; Pogue, Brian W.

2015-01-01

In fluorescence guided surgery, data visualization represents a critical step between signal capture and display needed for clinical decisions informed by that signal. The diversity of methods for displaying surgical images are reviewed, and a particular focus is placed on electronically detected and visualized signals, as required for near-infrared or low concentration tracers. Factors driving the choices such as human perception, the need for rapid decision making in a surgical environment, and biases induced by display choices are outlined. Five practical suggestions are outlined for optimal display orientation, color map, transparency/alpha function, dynamic range compression, and color perception check. PMID:26504628

Lutetium oxide-based transparent ceramic scintillators

DOEpatents

Seeley, Zachary; Cherepy, Nerine; Kuntz, Joshua; Payne, Stephen A.

2016-01-19

In one embodiment, a transparent ceramic of sintered nanoparticles includes gadolinium lutetium oxide doped with europium having a chemical composition (Lu.sub.1-xGd.sub.x).sub.2-YEu.sub.YO.sub.3, where X is any value within a range from about 0.05 to about 0.45 and Y is any value within a range from about 0.01 to about 0.2, and where the transparent ceramic exhibits a transparency characterized by a scatter coefficient of less than about 10%/cm. In another embodiment, a transparent ceramic scintillator of sintered nanoparticles, includes a body of sintered nanoparticles including gadolinium lutetium oxide doped with a rare earth activator (RE) having a chemical composition (Lu.sub.1-xGd.sub.x).sub.2-YRE.sub.YO.sub.3, where RE is selected from the group consisting of: Sm, Eu, Tb, and Dy, where the transparent ceramic exhibits a transparency characterized by a scatter coefficient of less than about 10%/cm.

Highly conductive transparent organic electrodes with multilayer structures for rigid and flexible optoelectronics.

PubMed

Guo, Xiaoyang; Liu, Xingyuan; Lin, Fengyuan; Li, Hailing; Fan, Yi; Zhang, Nan

2015-05-27

Transparent electrodes are essential components for optoelectronic devices, such as touch panels, organic light-emitting diodes, and solar cells. Indium tin oxide (ITO) is widely used as transparent electrode in optoelectronic devices. ITO has high transparency and low resistance but contains expensive rare elements, and ITO-based devices have poor mechanical flexibility. Therefore, alternative transparent electrodes with excellent opto-electrical performance and mechanical flexibility will be greatly demanded. Here, organics are introduced into dielectric-metal-dielectric structures to construct the transparent electrodes on rigid and flexible substrates. We show that organic-metal-organic (OMO) electrodes have excellent opto-electrical properties (sheet resistance of below 10 Ω sq(-1) at 85% transmission), mechanical flexibility, thermal and environmental stabilities. The OMO-based polymer photovoltaic cells show performance comparable to that of devices based on ITO electrodes. This OMO multilayer structure can therefore be used to produce transparent electrodes suitable for use in a wide range of optoelectronic devices.

Transparent flexible thermoelectric material based on non-toxic earth-abundant p-type copper iodide thin film

PubMed Central

Yang, C.; Souchay, D.; Kneiß, M.; Bogner, M.; Wei, H. M.; Lorenz, M.; Oeckler, O.; Benstetter, G.; Fu, Y. Q.; Grundmann, M.

2017-01-01

Thermoelectric devices that are flexible and optically transparent hold unique promise for future electronics. However, development of invisible thermoelectric elements is hindered by the lack of p-type transparent thermoelectric materials. Here we present the superior room-temperature thermoelectric performance of p-type transparent copper iodide (CuI) thin films. Large Seebeck coefficients and power factors of the obtained CuI thin films are analysed based on a single-band model. The low-thermal conductivity of the CuI films is attributed to a combined effect of the heavy element iodine and strong phonon scattering. Accordingly, we achieve a large thermoelectric figure of merit of ZT=0.21 at 300 K for the CuI films, which is three orders of magnitude higher compared with state-of-the-art p-type transparent materials. A transparent and flexible CuI-based thermoelectric element is demonstrated. Our findings open a path for multifunctional technologies combing transparent electronics, flexible electronics and thermoelectricity. PMID:28681842

Transparent flexible thermoelectric material based on non-toxic earth-abundant p-type copper iodide thin film.

PubMed

Yang, C; Souchay, D; Kneiß, M; Bogner, M; Wei, H M; Lorenz, M; Oeckler, O; Benstetter, G; Fu, Y Q; Grundmann, M

2017-07-06

Thermoelectric devices that are flexible and optically transparent hold unique promise for future electronics. However, development of invisible thermoelectric elements is hindered by the lack of p-type transparent thermoelectric materials. Here we present the superior room-temperature thermoelectric performance of p-type transparent copper iodide (CuI) thin films. Large Seebeck coefficients and power factors of the obtained CuI thin films are analysed based on a single-band model. The low-thermal conductivity of the CuI films is attributed to a combined effect of the heavy element iodine and strong phonon scattering. Accordingly, we achieve a large thermoelectric figure of merit of ZT=0.21 at 300 K for the CuI films, which is three orders of magnitude higher compared with state-of-the-art p-type transparent materials. A transparent and flexible CuI-based thermoelectric element is demonstrated. Our findings open a path for multifunctional technologies combing transparent electronics, flexible electronics and thermoelectricity.

Phenomenal transparency in achromatic checkerboards.

PubMed

Masin, S C

1999-04-01

The study explored the luminance relations that determine the occurrence of achromatic transparency in phenomenal surfaces on complex backgrounds. Let the luminances of the left and right parts of a transparent surface on a bipartite background and those of the left and right parts of the bipartite background be p and q and m and n, respectively. Metelli proposed that this surface looks transparent when the rule p < q if m < n (or p > q if m > n) is satisfied, and Masin and Fukuda that it looks transparent when the inclusion rule is satisfied, that is, when p epsilon (m, q) or q epsilon (p, n). These rules also apply to achromatic checkerboards formed by one checkerboard enclosed in another checkerboard. This study shows that only the inclusion rule correctly predicted the occurrence of transparency in these checkerboards.

Robot transparency, trust and utility

NASA Astrophysics Data System (ADS)

Wortham, Robert H.; Theodorou, Andreas

2017-07-01

As robot reasoning becomes more complex, debugging becomes increasingly hard based solely on observable behaviour, even for robot designers and technical specialists. Similarly, non-specialist users have difficulty creating useful mental models of robot reasoning from observations of robot behaviour. The EPSRC Principles of Robotics mandate that our artefacts should be transparent, but what does this mean in practice, and how does transparency affect both trust and utility? We investigate this relationship in the literature and find it to be complex, particularly in nonindustrial environments where, depending on the application and purpose of the robot, transparency may have a wider range of effects on trust and utility. We outline our programme of research to support our assertion that it is nevertheless possible to create transparent agents that are emotionally engaging despite having a transparent machine nature.

Transparent active matrix organic light-emitting diode displays driven by nanowire transistor circuitry.

PubMed

Ju, Sanghyun; Li, Jianfeng; Liu, Jun; Chen, Po-Chiang; Ha, Young-Geun; Ishikawa, Fumiaki; Chang, Hsiaokang; Zhou, Chongwu; Facchetti, Antonio; Janes, David B; Marks, Tobin J

2008-04-01

Optically transparent, mechanically flexible displays are attractive for next-generation visual technologies and portable electronics. In principle, organic light-emitting diodes (OLEDs) satisfy key requirements for this application-transparency, lightweight, flexibility, and low-temperature fabrication. However, to realize transparent, flexible active-matrix OLED (AMOLED) displays requires suitable thin-film transistor (TFT) drive electronics. Nanowire transistors (NWTs) are ideal candidates for this role due to their outstanding electrical characteristics, potential for compact size, fast switching, low-temperature fabrication, and transparency. Here we report the first demonstration of AMOLED displays driven exclusively by NW electronics and show that such displays can be optically transparent. The displays use pixel dimensions suitable for hand-held applications, exhibit 300 cd/m2 brightness, and are fabricated at temperatures suitable for integration on plastic substrates.

Military Personnel: DOD Needs to Take Further Actions to Prevent Sexual Assault During Initial Military Training

DTIC Science & Technology

2014-09-01

health care providers affected whether servicemembers who are victims of sexual assault can or do access mental health services. We made nine...victims’ access to mental health care ; and evaluate appropriate staffing levels of certain sexual assault response-related positions. DOD concurred with...Defense Health Care Reform: Additional Implementation Details Would Increase Transparency of DOD’s Plans and Enhance Accountability, GAO-14-49 (Washington

Iraqi Police Development Program: Opportunities for Improved Program Accountability and Budget Transparency

DTIC Science & Technology

2011-10-24

makes three recommendations to the Secretary of State, highlighting the need for (1) an adequate current assessment of the Iraqi police forces, (2...with documents obtained from other sources, allowed us to determine that: • DoS does not have a current assessment of Iraqi police forces...capabilities upon which to base its program. Such an assessment is essential for effective program targeting. Further, DoS does not have a sufficiently

Design of a Transparent-Transponder System.

DTIC Science & Technology

1980-11-01

the slight advantage of re- ducing the number of frequencies needed. There are, however, some good reasons why a minimum CW tone capability should be...C. Link Computations In this section we evaluate the capacity quotient of three links: (1) the uplink, (2) the downlink reference or pilot signal...sequences of several lengths, we have some protection against this problem. However, as the code is shortened the spread-spectrum process- ing gai !L against

Creating Supportive Environments and Thriving in a Volatile, Uncertain, Complex, and Ambiguous World.

PubMed

Pabico, Christine

2015-10-01

Nurse executives (NEs) are operating in a volatile, uncertain, complex, and ambiguous world. NEs must create supportive environments that promote staff empowerment, resilience, and alignment, to ensure organizational success. In addition, NEs need to be transparent and create a culture of partnership with their staff. The ability of NEs to create and sustain this environment is vital in supporting teams to successfully navigate in today's healthcare environment.

Patients push for price data. Lawsuits, regulations could cause consumers nationwide to start seeking more transparency from hospitals on outpatient fees.

PubMed

Becker, Cinda

2006-11-20

Lawsuits over hospital outpatient fees, including a case at Virginia Mason Medical Center, could prompt consumers nationwide to seek more information about their bills. The issue highlights the turf battle between physician- or corporate-owned clinics and competing hospital facilities, and how they're marketed. "We absolutely agree that patients need full information", says Virginia Mason's Sarah Patterson, left.

Exact analytic flux distributions for two-dimensional solar concentrators.

PubMed

Fraidenraich, Naum; Henrique de Oliveira Pedrosa Filho, Manoel; Vilela, Olga C; Gordon, Jeffrey M

2013-07-01

A new approach for representing and evaluating the flux density distribution on the absorbers of two-dimensional imaging solar concentrators is presented. The formalism accommodates any realistic solar radiance and concentrator optical error distribution. The solutions obviate the need for raytracing, and are physically transparent. Examples illustrating the method's versatility are presented for parabolic trough mirrors with both planar and tubular absorbers, Fresnel reflectors with tubular absorbers, and V-trough mirrors with planar absorbers.

Worldwide Emerging Environmental Issues Affecting the U.S. Military. November 2005 Report

DTIC Science & Technology

2005-11-01

rapid development. At the program’s launch festivity, the need for developing an international e- waste recycling systems along with transparent...electronic equipment. Sources: Roadmap Set for the Environmentally Sound Management of Electronic Waste in Asia-Pacific under the Basel Convention...34 Tom Dunne, of the agency’s Office of Solid Waste and Emergency Response, wrote in an e-mail message. 4.5 Sunk Weapons Represent a Growing

Solar energy thermalization and storage device

DOEpatents

McClelland, J.F.

A passive solar thermalization and thermal energy storage assembly which is visually transparent is described. The assembly consists of two substantial parallel, transparent wall members mounted in a rectangular support frame to form a liquid-tight chamber. A semitransparent thermalization plate is located in the chamber, substantially paralled to and about equidistant from the transparent wall members to thermalize solar radiation which is stored in a transparent thermal energy storage liquid which fills the chamber. A number of the devices, as modules, can be stacked together to construct a visually transparent, thermal storage wall for passive solar-heated buildings.

Flexible transparent conductors based on metal nanowire networks

DOE PAGES

Guo, Chuan Fei; Ren, Zhifeng

2015-04-01

Few conductors are transparent and flexible. Metals have the best electrical conductivity, but they are opaque and stiff in bulk form. However, metals can be transparent and flexible when they are very thin or properly arranged on the nanoscale. This review focuses on the flexible transparent conductors based on percolating networks of metal. Specifically, we discuss the fabrication, the means to improve the electrical conductivity, the large stretchability and its mechanism, and the applications of these metal networks. We also suggest some criteria for evaluating flexible transparent conductors and propose some new research directions in this emerging field.

Federal Funding Accountability and Transparency Act frequently asked questions

EPA Pesticide Factsheets

One stop shop for Federal Funding Accountability and Transparency Act (FFATA) questions. This frequently asked document will assist with Federal Funding Accountability and Transparency Act (FFATA) related questions.

Who Is Worst Off? Developing a Severity-scoring Model of Complex Emergency Affected Countries in Order to Ensure Needs Based Funding.

PubMed

Eriksson, Anneli; Ohlsén, Ylva Kristina; Garfield, Richard; von Schreeb, Johan

2015-11-03

Disasters affect close to 400 million people each year. Complex Emergencies (CE) are a category of disaster that affects nearly half of the 400 million and often last for several years. To support the people affected by CE, humanitarian assistance is provided with the aim of saving lives and alleviating suffering. It is widely agreed that funding for this assistance should be needs-based. However, to date, there is no model or set of indicators that quantify and compare needs from one CE to another. In an effort to support needs-based and transparent funding of humanitarian assistance, the aim of this study is to develop a model that distinguishes between levels of severity among countries affected by CE. In this study, severity serves as a predictor for level of need. The study focuses on two components of severity: vulnerability and exposure. In a literature and Internet search we identified indicators that characterize vulnerability and exposure to CE. Among the more than 100 indicators identified, a core set of six was selected in an expert ratings exercise. Selection was made based on indicator availability and their ability to characterize preexisting or underlying vulnerabilities (four indicators) or to quantify exposure to a CE (two indicators). CE from 50 countries were then scored using a 3-tiered score (Low-Moderate, High, Critical).  The developed model builds on the logic of the Utstein template. It scores severity based on the readily available value of four vulnerability and four exposure indicators. These are 1) GNI per capita, PPP, 2) Under-five mortality rate, per 1 000 live births, 3) Adult literacy rate, % of people ages 15 and above, 4) Underweight, % of population under 5 years, and 5) number of persons and proportion of population affected, and 6) number of uprooted persons and proportion of population uprooted. The model can be used to derive support for transparent, needs-based funding of humanitarian assistance. Further research is needed to determine its validity, the robustness of indicators and to what extent levels of scoring relate to CE outcome.

Nuclear Weapons Sustainment: Improvements Made to Budget Estimates Report, but Opportunities Remain to Further Enhance Transparency

DTIC Science & Technology

2015-12-01

Enhance Transparency Report to Congressional Committees December 2015 GAO-16-23 United States Government Accountability Office United...SUSTAINMENT Improvements Made to Budget Estimates Report, but Opportunities Remain to Further Enhance Transparency Why GAO Did This Study DOD and DOE are...modernization plans and (2) complete, transparent information on the methodologies used to develop those estimates. GAO analyzed the departments

"On Cloud Nine" and "On All Fours": Which Is More Transparent? Elements in EFL Learners' Transparency Assumptions

ERIC Educational Resources Information Center

Lin, Crystal Jia-yi

2015-01-01

Idiom transparency refers to how speakers think the meaning of the individual words contributes to the figurative meaning of an idiom as a whole (Gibbs, Nayak, & Cutting, 1989). However, it is not clear how speakers or language learners form their assumptions about an idiom's transparency level. This study set out to discover whether there are…

Transparent Armor Cost Benefit Study

DTIC Science & Technology

2008-04-01

2005 2006 UNCLASSIFIED UNCLASSIFIED 4/30/2008 4/17 2006 “Iraqi Pope Glass” 2004-2005 - GPK Recent HistoryEarly OIF Curb Wt: 10,300lbs GVW: 12,100lbs...UNCLASSIFIED UNCLASSIFIED 4/30/2008 5/17 Future Transparent Gun Shields Requirement: Upgrade GPKS with transparent armor for enhanced situational...awareness while maintaining soldier cover within armor envelope. AHI GS & GPK Upgraded Gunner Shield – Transparent Armored Gun Shield (TAGS

Transparent Armor Cost Benefit Study

DTIC Science & Technology

2006-10-30

added this cocoon to approximately 100 HMMWVs in Ramadi. 2006 “Iraqi Pope Glass” 2004-2005 - GPK Recent HistoryEarly OIF Curb Wt: 10,300lbs GVW...12,100lbs UNCLASSIFIED UNCLASSIFIED 10/30/2006 5/14 Future Transparent Gun Shields Requirement: Upgrade GPKS with transparent armor for enhanced...situational awareness while maintaining soldier cover within armor envelope. AHI GS & GPK Upgraded Gunner Shield – Transparent Armored Gun Shield (TAGS

Transparent Materials for Armor - A Cost Study

DTIC Science & Technology

2010-01-11

UNCLASSIFIED UNCLASSIFIED Example: M1114 Recent History 2006 “Iraqi Pope Glass” 2004-2005 GPK (Gunner Protection Kit) Early OIF Curb Wt: 10,300lbs GVW...12,100lbs More Vehicles More Attacks More Glass UNCLASSIFIED UNCLASSIFIED Future Transparent Gun Shields Requirement: Upgrade GPKs with transparent...Objective AHI GS & GPK Baseline Field Modified GS & APK UNCLASSIFIED UNCLASSIFIED •Average Total ($) for transparent armor increased by about 20% (each

Light-controlling, flexible and transparent ethanol gas sensor based on ZnO nanoparticles for wearable devices

PubMed Central

Zheng, Z. Q.; Yao, J. D.; Wang, B.; Yang, G. W.

2015-01-01

In recent years, owing to the significant applications of health monitoring, wearable electronic devices such as smart watches, smart glass and wearable cameras have been growing rapidly. Gas sensor is an important part of wearable electronic devices for detecting pollutant, toxic, and combustible gases. However, in order to apply to wearable electronic devices, the gas sensor needs flexible, transparent, and working at room temperature, which are not available for traditional gas sensors. Here, we for the first time fabricate a light-controlling, flexible, transparentand working at room-temperature ethanol gas sensor by using commercial ZnO nanoparticles. The fabricated sensor not only exhibits fast and excellent photoresponse, but also shows high sensing response to ethanol under UV irradiation. Meanwhile, its transmittance exceeds 62% in the visible spectral range, and the sensing performance keeps the same even bent it at a curvature angle of 90o. Additionally, using commercial ZnO nanoparticles provides a facile and low-cost route to fabricate wearable electronic devices. PMID:26076705

Use of multicriteria decision analysis to address conservation conflicts.

PubMed

Davies, A L; Bryce, R; Redpath, S M

2013-10-01

Conservation conflicts are increasing on a global scale and instruments for reconciling competing interests are urgently needed. Multicriteria decision analysis (MCDA) is a structured, decision-support process that can facilitate dialogue between groups with differing interests and incorporate human and environmental dimensions of conflict. MCDA is a structured and transparent method of breaking down complex problems and incorporating multiple objectives. The value of this process for addressing major challenges in conservation conflict management is that MCDA helps in setting realistic goals; entails a transparent decision-making process; and addresses mistrust, differing world views, cross-scale issues, patchy or contested information, and inflexible legislative tools. Overall we believe MCDA provides a valuable decision-support tool, particularly for increasing awareness of the effects of particular values and choices for working toward negotiated compromise, although an awareness of the effect of methodological choices and the limitations of the method is vital before applying it in conflict situations. © 2013 Society for Conservation Biology.

Quasi-experimental study designs series-paper 6: risk of bias assessment.

PubMed

Waddington, Hugh; Aloe, Ariel M; Becker, Betsy Jane; Djimeu, Eric W; Hombrados, Jorge Garcia; Tugwell, Peter; Wells, George; Reeves, Barney

2017-09-01

Rigorous and transparent bias assessment is a core component of high-quality systematic reviews. We assess modifications to existing risk of bias approaches to incorporate rigorous quasi-experimental approaches with selection on unobservables. These are nonrandomized studies using design-based approaches to control for unobservable sources of confounding such as difference studies, instrumental variables, interrupted time series, natural experiments, and regression-discontinuity designs. We review existing risk of bias tools. Drawing on these tools, we present domains of bias and suggest directions for evaluation questions. The review suggests that existing risk of bias tools provide, to different degrees, incomplete transparent criteria to assess the validity of these designs. The paper then presents an approach to evaluating the internal validity of quasi-experiments with selection on unobservables. We conclude that tools for nonrandomized studies of interventions need to be further developed to incorporate evaluation questions for quasi-experiments with selection on unobservables. Copyright © 2017 Elsevier Inc. All rights reserved.

Another look at confidence intervals: Proposal for a more relevant and transparent approach

NASA Astrophysics Data System (ADS)

Biller, Steven D.; Oser, Scott M.

2015-02-01

The behaviors of various confidence/credible interval constructions are explored, particularly in the region of low event numbers where methods diverge most. We highlight a number of challenges, such as the treatment of nuisance parameters, and common misconceptions associated with such constructions. An informal survey of the literature suggests that confidence intervals are not always defined in relevant ways and are too often misinterpreted and/or misapplied. This can lead to seemingly paradoxical behaviors and flawed comparisons regarding the relevance of experimental results. We therefore conclude that there is a need for a more pragmatic strategy which recognizes that, while it is critical to objectively convey the information content of the data, there is also a strong desire to derive bounds on model parameter values and a natural instinct to interpret things this way. Accordingly, we attempt to put aside philosophical biases in favor of a practical view to propose a more transparent and self-consistent approach that better addresses these issues.

Chromatic confocal microscopy for multi-depth imaging of epithelial tissue

PubMed Central

Olsovsky, Cory; Shelton, Ryan; Carrasco-Zevallos, Oscar; Applegate, Brian E.; Maitland, Kristen C.

2013-01-01

We present a novel chromatic confocal microscope capable of volumetric reflectance imaging of microstructure in non-transparent tissue. Our design takes advantage of the chromatic aberration of aspheric lenses that are otherwise well corrected. Strong chromatic aberration, generated by multiple aspheres, longitudinally disperses supercontinuum light onto the sample. The backscattered light detected with a spectrometer is therefore wavelength encoded and each spectrum corresponds to a line image. This approach obviates the need for traditional axial mechanical scanning techniques that are difficult to implement for endoscopy and susceptible to motion artifact. A wavelength range of 590-775 nm yielded a >150 µm imaging depth with ~3 µm axial resolution. The system was further demonstrated by capturing volumetric images of buccal mucosa. We believe these represent the first microstructural images in non-transparent biological tissue using chromatic confocal microscopy that exhibit long imaging depth while maintaining acceptable resolution for resolving cell morphology. Miniaturization of this optical system could bring enhanced speed and accuracy to endomicroscopic in vivo volumetric imaging of epithelial tissue. PMID:23667789

In Situ Roughness Measurements for the Solar Cell Industry Using an Atomic Force Microscope

PubMed Central

González-Jorge, Higinio; Alvarez-Valado, Victor; Valencia, Jose Luis; Torres, Soledad

2010-01-01

Areal roughness parameters always need to be under control in the thin film solar cell industry because of their close relationship with the electrical efficiency of the cells. In this work, these parameters are evaluated for measurements carried out in a typical fabrication area for this industry. Measurements are made using a portable atomic force microscope on the CNC diamond cutting machine where an initial sample of transparent conductive oxide is cut into four pieces. The method is validated by making a comparison between the parameters obtained in this process and in the laboratory under optimal conditions. Areal roughness parameters and Fourier Spectral Analysis of the data show good compatibility and open the possibility to use this type of measurement instrument to perform in situ quality control. This procedure gives a sample for evaluation without destroying any of the transparent conductive oxide; in this way 100% of the production can be tested, so improving the measurement time and rate of production. PMID:22319338

In situ roughness measurements for the solar cell industry using an atomic force microscope.

PubMed

González-Jorge, Higinio; Alvarez-Valado, Victor; Valencia, Jose Luis; Torres, Soledad

2010-01-01

Areal roughness parameters always need to be under control in the thin film solar cell industry because of their close relationship with the electrical efficiency of the cells. In this work, these parameters are evaluated for measurements carried out in a typical fabrication area for this industry. Measurements are made using a portable atomic force microscope on the CNC diamond cutting machine where an initial sample of transparent conductive oxide is cut into four pieces. The method is validated by making a comparison between the parameters obtained in this process and in the laboratory under optimal conditions. Areal roughness parameters and Fourier Spectral Analysis of the data show good compatibility and open the possibility to use this type of measurement instrument to perform in situ quality control. This procedure gives a sample for evaluation without destroying any of the transparent conductive oxide; in this way 100% of the production can be tested, so improving the measurement time and rate of production.

Biocompatibility of poloxamer hydrogel as an injectable intraocular lens: a pilot study.

PubMed

Kwon, Ji Won; Han, Young Keun; Lee, Woo Jin; Cho, Chong Su; Paik, Seung Joon; Cho, Dong Il; Lee, Jin Hak; Wee, Won Ryang

2005-03-01

To induce irreversible gelation of poloxamer, a thermosensitive polymer hydrogel, by using a photoinitiator and ultraviolet (UV) irradiation and to verify the biocompatibility and use of poloxamer as an injectable intraocular lens (IOL) material. Department of Ophthalmology, Seoul National University College of Medicine, Seoul Artificial Eye Center, Clinical Research Institute, Seoul National University Hospital, Seoul, Korea. In 10 rabbits, endocapsular phacoemulsification was performed and a poloxamer-photoinitiator mixture was injected into the capsular bag through a small capsulorhexis site. In 1 eye, the capsulorhexis site was closed with a small plug and the entire eye was irradiated with UV light for 5 minutes. Postoperatively, poloxamer transparency and effect on the conjunctiva, cornea, iris, vitreous, and retina were observed. A mixture comprising 25% poloxamer and 0.01% photoinitiator produced a poloxamer that remained transparent in the lens capsule for up to 6 months. No inflammatory response or toxicity was observed in the conjunctiva, cornea, iris, vitreous, or retina. Poloxamer is a potentially suitable material for an injectable IOL. Further study is needed.

In Brief: Geoengineering draft statement

NASA Astrophysics Data System (ADS)

Showstack, Randy

2009-04-01

The American Meteorological Society (AMS) has prepared a draft policy statement on geoengineering the climate system, which the AMS Council is considering for approval. The statement notes, “Geoengineering will not substitute for either aggressive mitigation or proactive adaptation. It could contribute to a comprehensive risk management strategy to slow climate change and alleviate its negative impacts, but the potential for adverse and unintended consequences implies a need for adequate research, appropriate regulation, and transparent consideration.” The statement, if adopted, indicates that AMS recommends enhanced research on the scientific and technological potential for geoengineering the climate system; additional study of the historical, ethical, legal, political, and societal aspects of the geoengineering issues; and the development and analysis of policy options to promote transparency and international cooperation in exploring geoengineering options along with restrictions on reckless efforts to manipulate the climate system. AMS is accepting comments on the draft statement until 23 April. For more information, visit http://ametsoc.org/policy/draftstatements/index.html#draft.

Taming the Beast: Policy-based Solutions for Addressing Corporate Interference in Climate Policy Development

NASA Astrophysics Data System (ADS)

Grifo, F.

2012-12-01

Inappropriate corporate influence in science-based policy has been a persistent problem in the United States across multiple issue areas and through many administrations. Interference in climate change policy has been especially pervasive in recent years, with tremendous levels of corporate resources being utilized to spread misinformation on climate science and reduce and postpone regulatory action. Much of the influence exerted by these forces is concealed from public view. Better corporate disclosure laws would reveal who is influencing climate policy to policy makers, investors, and the public. Greater transparency in the political activity of corporate actors is needed to shed light on who is responsible for the misinformation campaigns clouding the discussion around climate change in the United States. Such transparency will empower diverse stakeholders to hold corporations accountable. Specific federal policy reforms can be made in order to guide the nation down a path of greater corporate accountability in climate change policy efforts.

The Wettability of LaRC Colorless Polyimide Resins on Casting Surfaces

NASA Technical Reports Server (NTRS)

Miner, Gilda A.; Stoakley, Diane M.; St.Clair, Anne K.; Gierow, Paul A.; Bates, Kevin

1997-01-01

Two colorless polyimides developed at NASA Langley Research Center, LaRC -CP1 and LaRC -CP2, are noted for being optically transparent, resistant to radiation, and soluble in the imide form. These materials may be used to make transparent, thin polymer films for building large space reflector/collector inflatable antennas, solar arrays, radiometers, etc. Structures such as these require large area, seamless films produced via spin casting or spray coating the soluble imide on a variety of substrates. The ability of the soluble imide to wet and spread over the mandrel or casting substrate is needed information for processing these structures with minimum waste and reprocessing, thereby, reducing the production costs. The wettability of a liquid is reported as the contact angle of the solid/liquid system. This fairly simple measurement is complicated by the porosity and the amount of contamination of the solid substrate. This work investigates the effect of inherent viscosity, concentration of polyimide solids, and solvent type on the wettability of various curing surfaces.

Nitrogen grain-boundary passivation of In-doped ZnO transparent conducting oxide

NASA Astrophysics Data System (ADS)

Ali, D.; Butt, M. Z.; Coughlan, C.; Caffrey, D.; Shvets, I. V.; Fleischer, K.

2018-04-01

We have investigated the properties and conduction limitations of spray pyrolysis grown, low-cost transparent conducting oxide ZnO thin films doped with indium. We analyze the optical, electrical, and crystallographic properties as functions of In content with a specific focus on postgrowth heat treatment of these thin films at 320 ∘C in an inert, nitrogen atmosphere, which improves the films electrical properties considerably. The effect was found to be dominated by nitrogen-induced grain-boundary passivation, identified by a combined study using i n situ resistance measurement upon annealing, x-ray photoelectron spectroscopy, photoluminescence, and x-ray diffraction studies. We also highlight the chemical mechanism of morphologic and crystallographic changes found in films with high indium content. By optimizing growth conditions according to these findings, ZnO:In with a resistivity as low as 2 ×10 -3Ω cm , high optical quality (T ≈90 % ), and sheet resistance of 32 Ω /□ has been obtained without any need for postgrowth treatments.

How Should Health Data Be Used?

PubMed

Kaplan, Bonnie

2016-04-01

Electronic health records, data sharing, big data, data mining, and secondary use are enabling exciting opportunities for improving health and healthcare while also exacerbating privacy concerns. Two court cases about selling prescription data, the Sorrell case in the U.S. and the Source case in the U.K., raise questions of what constitutes "privacy" and "public interest"; they present an opportunity for ethical analysis of data privacy, commodifying data for sale and ownership, combining public and private data, data for research, and transparency and consent. These interwoven issues involve discussion of big data benefits and harms and touch on common dualities of the individual versus the aggregate or the public interest, research (or, more broadly, innovation) versus privacy, individual versus institutional power, identification versus identity and authentication, and virtual versus real individuals and contextualized information. Transparency, flexibility, and accountability are needed for assessing appropriate, judicious, and ethical data uses and users, as some are more compatible with societal norms and values than others.

Measuring the complete cross-cell carrier mobility distributions in bulk heterojunction solar cells

NASA Astrophysics Data System (ADS)

Seifter, Jason; Sun, Yanming; Choi, Hyosung; Lee, Byoung Hoon; Heeger, Alan

2015-03-01

Carbon nanotube-enabled, vertical, organic field effect transistors (CN-VFETs) based on the small molecule dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) have demonstrated high current, low-power operation suitable for driving active matix organic light emitting diode (AMOLED) displays. This performance is achieved without the need for costly high-resolution patterning, despite the low mobility of the organic semiconductor, by employing sub-micron channel widths, defined in the vertical devices by the thickness of the semiconducting layer. Replacing the thermally evaporated small molecule semiconductor with a solution-processed polymer would possibly further simplify the fabrication process and reduce manufacturing cost. Here we investigate several polymer systems as wide bandgap semiconducting channel layers for potentially air stable and transparent CN-VFETs. The field effect mobility and optical transparency of the polymer layers are determined, and the performance and air stability of CN-VFET devices are measured. A. S. gratefully acknowledges support from the National Science Foundation under DMR-1156737.

Transparent conductors based on microscale/nanoscale materials for high performance devices

NASA Astrophysics Data System (ADS)

Gao, Tongchuan

Transparent conductors are important as the top electrode for a variety of optoelectronic devices, including solar cells, light-emitting diodes (LEDs), at panel displays, and touch screens. Doped indium tin oxide (ITO) thin films are the predominant transparent conductor material. However, ITO thin films are brittle, making them unsuitable for the emerging flexible devices, and suffer from high material and processing cost. In my thesis, we developed a variety of transparent conductors toward a performance comparable with or superior to ITO thin films, with lower cost and potential for scalable manufacturing. Metal nanomesh (NM), hierarchical graphene/metal microgrid (MG), and hierarchical metal NM/MG materials were investigated. Simulation methods were used as a powerful tool to predict the transparency and sheet resistance of the transparent conductors by solving Maxwell's equations and Poisson's equation. Affordable and scalable fabrication processes were developed thereafter. Transparent conductors with over 90% transparency and less than 10 O/square sheet resistance were successfully fabricated on both rigid and flexible substrates. Durability tests, such as bending, heating and tape tests, were carried out to evaluate the robustness of the samples. Haze factor, which characterizes how blurry a transparent conductor appears, was also studied in-depth using analytical calculation and numerical simulation. We demonstrated a tunable haze factor for metal NM transparent conductors and analyzed the principle for tuning the haze factor. Plasmonic effects, excited by some transparent conductors, can lead to enhanced performance in photovoltaic devices. We systematically studied the effect of incorporating metal NM into ultrathin film silicon solar cells using numerical simulation, with the aid of optimization algorithms to reduce the optimization time. Mechanisms contributing to the enhanced performance were then identified and analyzed. Over 72% enhancement in short-circuit current-density was demonstrated by the optimal solar cell compared with 300-nm-thick Si solar cell with antireflection coating and silver back reflector.

A Design Methodology for Medical Processes

PubMed Central

Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

2016-01-01

Summary Background Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient’s needs, the uncertainty of the patient’s response, and the indeterminacy of patient’s compliance to treatment. Also, the multiple actors involved in patient’s care need clear and transparent communication to ensure care coordination. Objectives In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. Methods The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. Results The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Conclusions Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution. PMID:27081415

The Dutch Consumer Quality Index: an example of stakeholder involvement in indicator development

PubMed Central

2010-01-01

Background Like in several other Western countries, in the Dutch health care system regulated competition has been introduced. In order to make this work, comparable information is required about the performance of health care providers in terms of effectiveness, safety and patient experiences. Without further coordination, external actors will all try to force health care providers to be transparent. For health care providers this might result in a situation in which they have to deliver data for several sets of indicators, defined by different actors. Therefore, in the Netherlands an effort is made to define national sets of performance indicators and related measuring instruments. In this article, the following questions are addressed, using patient experiences as an example: - When and how are stakeholders involved in the development of indicators and instruments that measure the patients' experiences with health care providers? - Does this involvement lead to indicators and instruments that match stakeholders' information needs? Discussion The Dutch experiences show that it is possible to implement national indicator sets and to reach consensus about what needs to be measured. Preliminary evaluations show that for health care providers and health insurers the benefits of standardization outweigh the possible loss of tailor-made information. However, it has also become clear that particular attention should be given to the participation of patient/consumer organisations. Summary Stakeholder involvement is complex and time-consuming. However, it is the only way to balance the information needs of all the parties that ask for and benefit from transparency, without frustrating the health care system. PMID:20370925

Self-Powered Human-Interactive Transparent Nanopaper Systems.

PubMed

Zhong, Junwen; Zhu, Hongli; Zhong, Qize; Dai, Jiaqi; Li, Wenbo; Jang, Soo-Hwan; Yao, Yonggang; Henderson, Doug; Hu, Qiyi; Hu, Liangbing; Zhou, Jun

2015-07-28

Self-powered human-interactive but invisible electronics have many applications in anti-theft and anti-fake systems for human society. In this work, for the first time, we demonstrate a transparent paper-based, self-powered, and human-interactive flexible system. The system is based on an electrostatic induction mechanism with no extra power system appended. The self-powered, transparent paper device can be used for a transparent paper-based art anti-theft system in museums or for a smart mapping anti-fake system in precious packaging and documents, by virtue of the advantages of adding/removing freely, having no impairment on the appearance of the protected objects, and being easily mass manufactured. This initial study bridges the transparent nanopaper with a self-powered and human-interactive electronic system, paving the way for the development of smart transparent paper electronics.

Portable light transmission measuring system for preserved corneas.

PubMed

Ventura, Liliane; Jesus, Gabriel Torres de; Oliveira, Gunter Camilo Dablas de; Sousa, Sidney J F

2005-12-22

The authors have developed a small portable device for the objective measurement of the transparency of corneas stored in preservative medium, for use by eye banks in evaluation prior to transplantation. The optical system consists of a white light, lenses, and pinholes that collimate the white light beams and illuminate the cornea in its preservative medium, and an optical filter (400-700 nm) that selects the range of the wavelength of interest. A sensor detects the light that passes through the cornea, and the average corneal transparency is displayed. In order to obtain only the tissue transparency, an electronic circuit was built to detect a baseline input of the preservative medium prior to the measurement of corneal transparency. The operation of the system involves three steps: adjusting the "0 %" transmittance of the instrument, determining the "100 %" transmittance of the system, and finally measuring the transparency of the preserved cornea inside the storage medium. Fifty selected corneas were evaluated. Each cornea was submitted to three evaluation methods: subjective classification of transparency through a slit lamp, quantification of the transmittance of light using a corneal spectrophotometer previously developed, and measurement of transparency with the portable device. By comparing the three methods and using the expertise of eye bank trained personnel, a table for quantifying corneal transparency with the new device has been developed. The correlation factor between the corneal spectrophotometer and the new device is 0,99813, leading to a system that is able to standardize transparency measurements of preserved corneas, which is currently done subjectively.

Transparent Armor Cost Benefit Study

DTIC Science & Technology

2007-03-06

Armored HMMWVs (M1114s) 2003 2005 2006 UNCLASSIFIED UNCLASSIFIED 3/6/2007 4/17 2006 “Iraqi Pope Glass” 2004-2005 - GPK Recent HistoryEarly OIF Curb Wt...10,300lbs GVW: 12,100lbs UNCLASSIFIED UNCLASSIFIED 3/6/2007 5/17 Future Transparent Gun Shields Requirement: Upgrade GPKS with transparent armor for...enhanced situational awareness while maintaining soldier cover within armor envelope. AHI GS & GPK Upgraded Gunner Shield – Transparent Armored Gun

Exploratory Development of Transparent Conductor Materials

DTIC Science & Technology

1975-03-01

silicon c,:ll) or b&%ckwa.U (CdS cells ) electrodes. ’Nn oxide and indium oxide are currently the best known transparent condudwtor materials and they are...From an investigation of its fundamental physical properties it was concluded that cadmium stannate is a viable candidate for transparent solar cell ...transparent backwall electrodes in CdS solar cells . A further objective has been the utilization of the high infrared reflectivity of cadmium

Transparent metals for ultrabroadband electromagnetic waves.

PubMed

Fan, Ren-Hao; Peng, Ru-Wen; Huang, Xian-Rong; Li, Jia; Liu, Yongmin; Hu, Qing; Wang, Mu; Zhang, Xiang

2012-04-17

Making metals transparent, which could lead to fascinating applications, has long been pursued. Here we demonstrate that with narrow slit arrays metallic plates become transparent for extremely broad bandwidths; the high transmission efficiency is insensitive to the metal thickness. This work provides a guideline to develop novel devices, including transparent conducting panels, broadband metamaterials, and antireflective solar cells. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Partly transparent young legume pods: Do they mimic caterpillars for defense and simultaneously enable better photosynthesis?

PubMed Central

Lev-Yadun, Simcha

2015-01-01

Being partly or fully transparent as a defense from predation is mostly known in various groups of aquatic animals and various terrestrial arthropods. Plants, being photosynthetic and having cell walls made of various polymers, cannot be wholly transparent. In spite of these inherent limitations, some succulent plant species of arid zones have partially transparent “windows” in order to perform photosynthesis in their below-ground leaves, as defense from herbivores as well as for protection from harsh environmental conditions. Similarly, transparent “windows” or even wholly transparent leaves are found in certain thick or thin, above-ground organs irrespective of aridity. The young pods of various wild annual Mediterranean legume species belonging to the genera Lathyrus, Pisum and Vicia are partly transparent and may therefore look like caterpillars when viewed with back illumination. I propose that this character serves 2 functions: (1) being a type of defensive caterpillar mimicry that may reduce their consumption by various herbivores in that very sensitive stage, and (2) simultaneously allowing better photosynthesis in the rapidly growing seeds and pods. Unlike animals that are transparent for either defensive or aggressive crypsis, in the case of young legume pods it allows them to visually mimic caterpillars for defense. PMID:26633565

Developing the Surface Chemistry of Transparent Butyl Rubber for Impermeable Stretchable Electronics.

PubMed

Vohra, Akhil; Carmichael, R Stephen; Carmichael, Tricia Breen

2016-10-11

Transparent butyl rubber is a new elastomer that has the potential to revolutionize stretchable electronics due to its intrinsically low gas permeability. Encapsulating organic electronic materials and devices with transparent butyl rubber protects them from problematic degradation due to oxygen and moisture, preventing premature device failure and enabling the fabrication of stretchable organic electronic devices with practical lifetimes. Here, we report a methodology to alter the surface chemistry of transparent butyl rubber to advance this material from acting as a simple device encapsulant to functioning as a substrate primed for direct device fabrication on its surface. We demonstrate a combination of plasma and chemical treatment to deposit a hydrophilic silicate layer on the transparent butyl rubber surface to create a new layered composite that combines Si-OH surface chemistry with the favorable gas-barrier properties of bulk transparent butyl rubber. We demonstrate that these surface Si-OH groups react with organosilanes to form self-assembled monolayers necessary for the deposition of electronic materials, and furthermore demonstrate the fabrication of stretchable gold wires using nanotransfer printing of gold films onto transparent butyl rubber modified with a thiol-terminated self-assembled monolayer. The surface modification of transparent butyl rubber establishes this material as an important new elastomer for stretchable electronics and opens the way to robust, stretchable devices.

Community care for the Elderly: Needs and Service Use Study (CENSUS): Who receives home care packages and what are the outcomes?

PubMed

Low, Lee-Fay; Fletcher, Jennifer; Gresham, Meredith; Brodaty, Henry

2015-09-01

Investigate factors associated with waiting times for home care packages and outcomes for care recipients and carers. Analyses of data collected every four months for 12 months from 55 community-dwelling older adults eligible for government-subsidised packaged care and their carers. Thirty of fifty-five participants were offered a package; they waited from one to 237 days. Baseline quality of life was higher for those offered a package than those not. Baseline care needs and unmet needs, neuropsychiatric symptoms, and cognitive decline did not predict offers. Package receipt compared to non-package receipt was associated with decreased carer burden over time but did not affect levels of unmet care needs, care needs or quality of life. Being offered a home care package was not based on waiting time or unmet care needs. Reforms should include a transparent system of wait listing and prioritisation. © 2014 ACOTA.

Plasmon-Induced Transparency Based on Triple Arc-Ring Resonators.

PubMed

Dong, Guang-Xi; Xie, Qin; Zhang, Qi; Wang, Ben-Xin; Huang, Wei-Qing

2018-06-06

This paper presents a plasmon-induced transparency (PIT) using an easy-fabricating metamaterial composed of three pieces of metallic arc-rings on top of a dielectric substrate. The transmission of the transparent peak of 1.32 THz reaches approximately 93%. The utilization of the coupled Lorentzian oscillator model and the distribution of electromagnetic fields together explain the cause of the transparent peak. The simulation results further demonstrate that the bandwidth of the transmission peak can be narrowed by changing the sizes of the arc-rings. Moreover, an on/off effect based on the transparent peak is discussed by introducing photosensitive silicon into the air gaps of the suggested metamaterial structure.

TerraFERMA: The Transparent Finite Element Rapid Model Assembler for multi-physics problems in the solid Earth sciences

NASA Astrophysics Data System (ADS)

Spiegelman, M. W.; Wilson, C. R.; Van Keken, P. E.

2013-12-01

We announce the release of a new software infrastructure, TerraFERMA, the Transparent Finite Element Rapid Model Assembler for the exploration and solution of coupled multi-physics problems. The design of TerraFERMA is driven by two overarching computational needs in Earth sciences. The first is the need for increased flexibility in both problem description and solution strategies for coupled problems where small changes in model assumptions can often lead to dramatic changes in physical behavior. The second is the need for software and models that are more transparent so that results can be verified, reproduced and modified in a manner such that the best ideas in computation and earth science can be more easily shared and reused. TerraFERMA leverages three advanced open-source libraries for scientific computation that provide high level problem description (FEniCS), composable solvers for coupled multi-physics problems (PETSc) and a science neutral options handling system (SPuD) that allows the hierarchical management of all model options. TerraFERMA integrates these libraries into an easier to use interface that organizes the scientific and computational choices required in a model into a single options file, from which a custom compiled application is generated and run. Because all models share the same infrastructure, models become more reusable and reproducible. TerraFERMA inherits much of its functionality from the underlying libraries. It currently solves partial differential equations (PDE) using finite element methods on simplicial meshes of triangles (2D) and tetrahedra (3D). The software is particularly well suited for non-linear problems with complex coupling between components. We demonstrate the design and utility of TerraFERMA through examples of thermal convection and magma dynamics. TerraFERMA has been tested successfully against over 45 benchmark problems from 7 publications in incompressible and compressible convection, magmatic solitary waves and Stokes flow with free surfaces. We have been using it extensively for research in basic magma dynamics, fluid flow in subduction zones and reactive cracking in poro-elastic materials. TerraFERMA is open-source and available as a git repository at bitbucket.org/tferma/tferma and through CIG. Instability of a 1-D magmatic solitary wave to spherical 3D waves calculated using TerraFERMA

Carbon nanotube charge collectors for nanoimprinted hybrid perovskite photovoltaics (Conference Presentation)

NASA Astrophysics Data System (ADS)

Zakhidov, Anvar A.; Haroldson, Ross; Saranin, Danila; Martinez, Patricia; Ishteev, Artur

2017-06-01

The hybrid (organo-inorganic) lead-halide perovskites revolutionized the field of solar cell research due to the impressive power conversion efficiencies of up to 21% recently reported in perovskite based solar cells. This talk will present first the general concepts of excitonic photovoltaics, as compared to conventional Si-type solar cells, asking a question: is hybrid perovskite PV an excitonic solar cell or not? Do we need excitons dissociation at D-A interfaces or CNT charge collectors? Then I will show our recent experimental results on the fast spectroscopy of excitons, magnetic field effect on generation of correlated (e-h) pairs. Also will discuss our Hall effect results, that allows to evaluate intrinsic charge carrier transport and direct measurements of mobility in these materials performed for the first time in steady-state dc transport regime. From these measurements, we have obtained the electron-hole recombination coefficient, the carrier diffusion length and lifetime. Our main results include the intrinsic Hall carrier mobility reaching up to 60 cm2V-1s-1 in perovskite single crystals, carrier lifetimes of up to 3 ms (surprisingly too long!), and carrier diffusion lengths as long as 650 μm (huge if compared to organic and even best inorganic materials). Our results also demonstrate that photocarrier recombination in these disordered solution-processed perovskites is as weak as in the best (high-purity single crystals) of conventional direct-band inorganic semiconductors. Moreover, as we show in our experiment, carrier trapping in perovskites is also strongly suppressed, which accounts for such long carrier lifetimes and diffusion lengths, significantly longer than similar parameters in the best inorganic semiconductors, such e.g. as GaAs. All these remarkable transport properties of hybrid perovskites need to be understood from fundamental physics point of view. Looks like we need some new concepts to explain the mysterious properties of "protected" hybrid perovskites. We suggest that some of this unusual properties can be attributed to a special type of "dipole rotational polaron" formed in their lattice due to interactions of charge with methyl-ammonium organic dipoles, each of 2.3 Debye. Examples of perovskite solar cell with transparent CNT charge collectors will demonstrated the 3 D charge collection in the monolithic tandems of perovskite PV with other dissimilar materials PVs, such as OPV and inorganic PV. We describe the pioneering methods to create highly transparent CNT sheets by dry lamination from vertically alligned CVD forests of MWCNTs. Transparency can be further increased by converting CNT aerogels into locally collapsed meshs with micron scale oppenings by spraying Ag nanowires, which lowers sheet resistance to values of Rsh< 40 ohm/sq. such AgNW@CNT transparent sheets are ideal interlayers in three terminal tandems of perovskite PV with polymeric OPV and/or inorganic solar cells. We show that nanoimprinting can further improve the performance of perovskite photodetectors and optoelectronic devices

Switch Detection in Preschoolers’ Cognitive Flexibility

PubMed Central

Chevalier, Nicolas; Wiebe, Sandra A.; Huber, Kristina L.; Espy, Kimberly Andrews

2011-01-01

The present study addressed the role of switch detection in cognitive flexibility by testing the effect of transition cues (i.e., cues that directly signal the need to switch or maintain a given task goal) in a cued set-shifting paradigm at age 5. Children performed better, especially on switch trials, when transition cues were combined with traditional task cues (i.e., cues that directly signal the relevant task on a given trial), relative to conditions without transition cues. This effect was not influenced by explicit knowledge of transition cues or transition cue transparency, suggesting transition cues did not need to be semantically processed to be beneficial. These findings reveal that young children’s difficulties in set-shifting situations partially stem from failures to monitor for the need to switch. PMID:21353678

Lignin-Retaining Transparent Wood.

PubMed

Li, Yuanyuan; Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin; Berglund, Lars

2017-09-11

Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light-transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high-lignin-content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK -1 , and work-tofracture of 1.2 MJ m -3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy-saving buildings. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Lignin‐Retaining Transparent Wood

PubMed Central

Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin

2017-01-01

Abstract Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light‐transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high‐lignin‐content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK−1, and work‐tofracture of 1.2 MJ m−3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy‐saving buildings. PMID:28719095

Water transparency distribution under varied currents in the largest river-connected lake of China.

PubMed

Wang, Hua; Zhao, Yijun; Zhang, Zhizhang; Pang, Yong; Liang, Dongfang

2017-01-01

Water transparency is an important ecological indicator for shallow lakes. The largest shallow lake, Poyang Lake, as well as the most typical river-connected lake in China was selected as the research area. In view of the complicated water-sediment conditions induced by its frequent water exchange with external rivers, the dominant factors driving water transparency were determined against the field investigated data from 2003 to 2013 and a specific driving function was established. A numerical model coupling suspended sediment, Chl-a and chemical oxygen demand was developed and validated, and the spatial water transparency distributions under three typical current structures in Poyang Lake, Gravity-style, Jacking-style and Backflow-style, were quantitatively estimated. The following results stood out: water transparency in the lake varied distinctly with the current status; Backflow-style current was basically characterized by the lowest water transparency, while that under Jacking-style was the highest due to the lower sediment carrying capacity. In some outlying regions in the lake, where the water current is hardly influenced by the mainstream, the water transparency was always kept at a stable level.

Highly Conductive Transparent and Flexible Electrodes Including Double-Stacked Thin Metal Films for Transparent Flexible Electronics.

PubMed

Han, Jun Hee; Kim, Do-Hong; Jeong, Eun Gyo; Lee, Tae-Woo; Lee, Myung Keun; Park, Jeong Woo; Lee, Hoseung; Choi, Kyung Cheol

2017-05-17

To keep pace with the era of transparent and deformable electronics, electrode functions should be improved. In this paper, an innovative structure is suggested to overcome the trade-off between optical and electrical properties that commonly arises with transparent electrodes. The structure of double-stacked metal films showed high conductivity (<3 Ω/sq) and high transparency (∼90%) simultaneously. A proper space between two metal films led to high transmittance by an optical phenomenon. The principle of parallel connection allowed the electrode to have high conductivity. In situ fabrication was possible because the only materials composing the electrode were silver and WO 3 , which can be deposited by thermal evaporation. The electrode was flexible enough to withstand 10 000 bending cycles with a 1 mm bending radius. Furthermore, a few μm scale patterning of the electrode was easily implemented by using photolithography, which is widely employed industrially for patterning. Flexible organic light-emitting diodes and a transparent flexible thin-film transistor were successfully fabricated with the proposed electrode. Various practical applications of this electrode to new transparent flexible electronics are expected.

Elegant grapheme-phoneme correspondence: a periodic chart and singularity generalization unify decoding.

PubMed

Gates, Louis

2018-04-01

The accompanying article introduces highly transparent grapheme-phoneme relationships embodied within a Periodic table of decoding cells, which arguably presents the quintessential transparent decoding elements. The study then folds these cells into one highly transparent but simply stated singularity generalization-this generalization unifies the decoding cells (97% transparency). Deeper, the periodic table and singularity generalization together highlight the connectivity of the periodic cells. Moreover, these interrelated cells, coupled with the singularity generalization, clarify teaching targets and enable efficient learning of the letter-sound code. This singularity generalization, in turn, serves as a model for creating unified but easily stated subordinate generalizations for any one of the transparent cells or groups of cells shown within the tables. The article then expands the periodic cells into two tables of teacher-ready sample word lists-one table includes sample words for the basic and phonogram vowel cells, and the other table embraces word samples for the transparent consonant cells. The paper concludes with suggestions for teaching the cellular transparency embedded within reoccurring isolated words and running text to promote decoding automaticity of the periodic cells.

Semi-transparent solar cells

NASA Astrophysics Data System (ADS)

Sun, J.; Jasieniak, J. J.

2017-03-01

Semi-transparent solar cells are a type of technology that combines the benefits of visible light transparency and light-to-electricity conversion. One of the biggest opportunities for such technologies is in their integration as windows and skylights within energy-sustainable buildings. Currently, such building integrated photovoltaics (BIPV) are dominated by crystalline silicon based modules; however, the opaque nature of silicon creates a unique opportunity for the adoption of emerging photovoltaic candidates that can be made truly semi-transparent. These include: amorphous silicon-, kesterite-, chalcopyrite-, CdTe-, dye-sensitized-, organic- and perovskite- based systems. For the most part, amorphous silicon has been the workhorse in the semi-transparent solar cell field owing to its established, low-temperature fabrication processes. Excitement around alternative classes, particularly perovskites and the inorganic candidates, has recently arisen because of the major efficiency gains exhibited by these technologies. Importantly, each of these presents unique opportunities and challenges within the context of BIPV. This topic review provides an overview into the broader benefits of semi-transparent solar cells as building-integrated features, as well as providing the current development status into all of the major types of semi-transparent solar cells technologies.

Moving from spatially segregated to transparent motion: a modelling approach

PubMed Central

Durant, Szonya; Donoso-Barrera, Alejandra; Tan, Sovira; Johnston, Alan

2005-01-01

Motion transparency, in which patterns of moving elements group together to give the impression of lacy overlapping surfaces, provides an important challenge to models of motion perception. It has been suggested that we perceive transparent motion when the shape of the velocity histogram of the stimulus is bimodal. To investigate this further, random-dot kinematogram motion sequences were created to simulate segregated (perceptually spatially separated) and transparent (perceptually overlapping) motion. The motion sequences were analysed using the multi-channel gradient model (McGM) to obtain the speed and direction at every pixel of each frame of the motion sequences. The velocity histograms obtained were found to be quantitatively similar and all were bimodal. However, the spatial and temporal properties of the velocity field differed between segregated and transparent stimuli. Transparent stimuli produced patches of rightward and leftward motion that varied in location over time. This demonstrates that we can successfully differentiate between these two types of motion on the basis of the time varying local velocity field. However, the percept of motion transparency cannot be based simply on the presence of a bimodal velocity histogram. PMID:17148338

A reinterpretation of transparency perception in terms of gamut relativity.

PubMed

Vladusich, Tony

2013-03-01

Classical approaches to transparency perception assume that transparency constitutes a perceptual dimension corresponding to the physical dimension of transmittance. Here I present an alternative theory, termed gamut relativity, that naturally explains key aspects of transparency perception. Rather than being computed as values along a perceptual dimension corresponding to transmittance, gamut relativity postulates that transparency is built directly into the fabric of the visual system's representation of surface color. The theory, originally developed to explain properties of brightness and lightness perception, proposes how the relativity of the achromatic color gamut in a perceptual blackness-whiteness space underlies the representation of foreground and background surface layers. Whereas brightness and lightness perception were previously reanalyzed in terms of the relativity of the achromatic color gamut with respect to illumination level, transparency perception is here reinterpreted in terms of relativity with respect to physical transmittance. The relativity of the achromatic color gamut thus emerges as a fundamental computational principle underlying surface perception. A duality theorem relates the definition of transparency provided in gamut relativity with the classical definition underlying the physical blending models of computer graphics.

Assessing stakeholder opinion on relations between cancer patient groups and pharmaceutical companies in Europe.

PubMed

Leto di Priolo, Susanna; Fehervary, Andras; Riggins, Phil; Redmond, Kathy

2012-01-01

The relationship between the pharmaceutical industry and cancer patient groups has been the subject of much scrutiny and skepticism, and some high-profile negative media coverage has focused attention on some of the problematic aspects of the relationship. Both the pharmaceutical industry and cancer patient groups have made an effort in recent years to improve the transparency and openness of their relations, specifically with regard to the financial support offered by pharmaceutical companies to patient groups. The objectives of this survey were to benchmark perceptions held by different stakeholder groups about current relationships between cancer patient groups and pharmaceutical companies in Europe, and to explore opinions about ways in which partnerships between patient groups and pharmaceutical companies could evolve to the benefit of cancer patients. The survey was conducted using a structured questionnaire that contained a combination of matrix, scaled, and open-ended questions. The questionnaire was developed based on a literature search and the findings from ten in-depth interviews conducted with policy makers and advocates working at an EU level. Telephone interviews were carried out using a structured questionnaire with a convenience sample of 161 policy makers, cancer healthcare group representatives, and cancer patient group leaders from France, Germany, Hungary, Italy, Latvia, the Netherlands, Poland, Portugal, Romania, Spain, Sweden, and the UK. The interviews took place in the relevant language of the country. The current relationship between the pharmaceutical industry and cancer patient groups in Europe is generally viewed as positive, but it is also viewed as being unequal, not transparent enough, and not sufficiently patient-centric. There is broad agreement that cancer patient groups can help companies identify unmet needs and contribute to the development of innovative medicines; however, there is some concern about cancer patients' competence to take on this role. Also, pharmaceutical companies and patient groups have a common interest in working together on the development of non-promotional patient information and strategies to support medicines adherence. Respondents also indicated that the two sectors have a legitimate interest in ensuring that patients in need access appropriate treatments in a timely manner. Ongoing cooperation between health professionals, pharmaceutical companies, and cancer patient groups is also viewed as important. Efforts should continue to make relations between pharmaceutical companies and cancer patient groups as equal, open, and transparent as possible. Despite ongoing concerns about the openness and transparency of relations between pharmaceutical companies and patient groups, there is scope for these two sectors to work together on issues of common interest.

A Job Pause Service under LAM/MPI+BLCR for Transparent Fault Tolerance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Chao; Mueller, Frank; Engelmann, Christian

2007-01-01

Checkpoint/restart (C/R) has become a requirement for long-running jobs in large-scale clusters due to a meantime- to-failure (MTTF) in the order of hours. After a failure, C/R mechanisms generally require a complete restart of an MPI job from the last checkpoint. A complete restart, however, is unnecessary since all but one node are typically still alive. Furthermore, a restart may result in lengthy job requeuing even though the original job had not exceeded its time quantum. In this paper, we overcome these shortcomings. Instead of job restart, we have developed a transparent mechanism for job pause within LAM/MPI+BLCR. This mechanismmore » allows live nodes to remain active and roll back to the last checkpoint while failed nodes are dynamically replaced by spares before resuming from the last checkpoint. Our methodology includes LAM/MPI enhancements in support of scalable group communicationwith fluctuating number of nodes, reuse of network connections, transparent coordinated checkpoint scheduling and a BLCR enhancement for job pause. Experiments in a cluster with the NAS Parallel Benchmark suite show that our overhead for job pause is comparable to that of a complete job restart. A minimal overhead of 5.6% is only incurred in case migration takes place while the regular checkpoint overhead remains unchanged. Yet, our approach alleviates the need to reboot the LAM run-time environment, which accounts for considerable overhead resulting in net savings of our scheme in the experiments. Our solution further provides full transparency and automation with the additional benefit of reusing existing resources. Executing continues after failures within the scheduled job, i.e., the application staging overhead is not incurred again in contrast to a restart. Our scheme offers additional potential for savings through incremental checkpointing and proactive diskless live migration, which we are currently working on.« less

Cost-Effectiveness Analysis of a Transparent Antimicrobial Dressing for Managing Central Venous and Arterial Catheters in Intensive Care Units

PubMed Central

Bernatchez, Stéphanie F.; Ruckly, Stéphane; Timsit, Jean-François

2015-01-01

Objective To model the cost-effectiveness impact of routine use of an antimicrobial chlorhexidine gluconate-containing securement dressing compared to non-antimicrobial transparent dressings for the protection of central vascular lines in intensive care unit patients. Design This study uses a novel health economic model to estimate the cost-effectiveness of using the chlorhexidine gluconate dressing versus transparent dressings in a French intensive care unit scenario. The 30-day time non-homogeneous markovian model comprises eight health states. The probabilities of events derive from a multicentre (12 French intensive care units) randomized controlled trial. 1,000 Monte Carlo simulations of 1,000 patients per dressing strategy are used for probabilistic sensitivity analysis and 95% confidence intervals calculations. The outcome is the number of catheter-related bloodstream infections avoided. Costs of intensive care unit stay are based on a recent French multicentre study and the cost-effectiveness criterion is the cost per catheter-related bloodstream infections avoided. The incremental net monetary benefit per patient is also estimated. Patients 1000 patients per group simulated based on the source randomized controlled trial involving 1,879 adults expected to require intravascular catheterization for 48 hours. Intervention Chlorhexidine Gluconate-containing securement dressing compared to non-antimicrobial transparent dressings. Results The chlorhexidine gluconate dressing prevents 11.8 infections /1,000 patients (95% confidence interval: [3.85; 19.64]) with a number needed to treat of 85 patients. The mean cost difference per patient of €141 is not statistically significant (95% confidence interval: [€-975; €1,258]). The incremental cost-effectiveness ratio is of €12,046 per catheter-related bloodstream infection prevented, and the incremental net monetary benefit per patient is of €344.88. Conclusions According to the base case scenario, the chlorhexidine gluconate dressing is more cost-effective than the reference dressing. Trial Registration This model is based on the data from the RCT registered with www.clinicaltrials.gov (NCT01189682). PMID:26086783

Evaluation of a 'virtual' approach to commissioning health research.

PubMed

McCourt, Christine A; Morgan, Philip A; Youll, Penny

2006-10-18

The objective of this study was to evaluate the implementation of a 'virtual' (computer-mediated) approach to health research commissioning. This had been introduced experimentally in a DOH programme--the 'Health of Londoners Programme'--in order to assess whether is could enhance the accessibility, transparency and effectiveness of commissioning health research. The study described here was commissioned to evaluate this novel approach, addressing these key questions. A naturalistic-experimental approach was combined with principles of action research. The different commissioning groups within the programme were randomly allocated to either the traditional face-to-face mode or the novel 'virtual' mode. Mainly qualitative data were gathered including observation of all (virtual and face-to-face) commissioning meetings; semi-structured interviews with a purposive sample of participants (n = 32/66); structured questionnaires and interviews with lead researchers of early commissioned projects. All members of the commissioning groups were invited to participate in collaborative enquiry groups which participated actively in the analysis process. The virtual process functioned as intended, reaching timely and relatively transparent decisions that participants had confidence in. Despite the potential for greater access using a virtual approach, few differences were found in practice. Key advantages included physical access, a more flexible and extended time period for discussion, reflection and information gathering and a more transparent decision-making process. Key challenges were the reduction of social cues available in a computer-mediated medium that require novel ways of ensuring appropriate dialogue, feedback and interaction. However, in both modes, the process was influenced by a range of factors and was not technology driven. There is potential for using computer-mediated communication within the research commissioning process. This may enhance access, effectiveness and transparency of decision-making but further development is needed for this to be fully realised, including attention to process as well as the computer-mediated medium.

Patient Organizations’ Funding from Pharmaceutical Companies: Is Disclosure Clear, Complete and Accessible to the Public? An Italian Survey

PubMed Central

Colombo, Cinzia; Mosconi, Paola; Villani, Walter; Garattini, Silvio

2012-01-01

Background Many patients’ and consumers’ organizations accept drug industry funding to support their activities. As drug companies and patient groups move closer, disclosure become essential for transparency, and the internet could be a useful means of making sponsorship information accessible to the public. This survey aims to assess the transparency of a large group of Italian patient and consumer groups and a group of pharmaceutical companies, focusing on their websites. Methodology/Principal Findings Patient and consumer groups were selected from those stated to be sponsored by a group of pharmaceutical companies on their websites. The websites were examined using two forms with principal (name of drug companies providing funds, amount of funding) and secondary indicators of transparency (section where sponsors are disclosed, update of sponsorship). Principal indicators were applied independently by two reviewers to the patient and consumer groups’ websites. Discordances were solved by discussion. One hundred fifty-seven Italian patient and consumer groups and 17 drug companies were considered. Thirteen drug companies (76%) named at least one group funded, on their Italian websites. Of these, four (31%) indicated the activities sponsored and two (15%) the amount of funding. Of the 157 patient and consumer groups, 46 (29%) named at least one pharmaceutical company as providing funds. Three (6%) reported the amount of funding, 25 (54%) the activities funded, none the proportion of income derived from drug companies. Among the groups naming pharmaceutical company sponsors, 15 (33%) declared them in a dedicated section, five (11%) on the home page, the others in the financial report or other sections. Conclusions/Significance Disclosure of funds is scarce on Italian patient and consumer groups’ websites. The levels of transparency need to be improved. Disclosure of patient and consumer groups provided with funds is frequent on Italian pharmaceutical companies’ websites, but information are often not complete. PMID:22590498

Evaluation of a 'virtual' approach to commissioning health research

PubMed Central

McCourt, Christine A; Morgan, Philip A; Youll, Penny

2006-01-01

Background The objective of this study was to evaluate the implementation of a 'virtual' (computer-mediated) approach to health research commissioning. This had been introduced experimentally in a DOH programme – the 'Health of Londoners Programme' – in order to assess whether is could enhance the accessibility, transparency and effectiveness of commissioning health research. The study described here was commissioned to evaluate this novel approach, addressing these key questions. Methods A naturalistic-experimental approach was combined with principles of action research. The different commissioning groups within the programme were randomly allocated to either the traditional face-to-face mode or the novel 'virtual' mode. Mainly qualitative data were gathered including observation of all (virtual and face-to-face) commissioning meetings; semi-structured interviews with a purposive sample of participants (n = 32/66); structured questionnaires and interviews with lead researchers of early commissioned projects. All members of the commissioning groups were invited to participate in collaborative enquiry groups which participated actively in the analysis process. Results The virtual process functioned as intended, reaching timely and relatively transparent decisions that participants had confidence in. Despite the potential for greater access using a virtual approach, few differences were found in practice. Key advantages included physical access, a more flexible and extended time period for discussion, reflection and information gathering and a more transparent decision-making process. Key challenges were the reduction of social cues available in a computer-mediated medium that require novel ways of ensuring appropriate dialogue, feedback and interaction. However, in both modes, the process was influenced by a range of factors and was not technology driven. Conclusion There is potential for using computer-mediated communication within the research commissioning process. This may enhance access, effectiveness and transparency of decision-making but further development is needed for this to be fully realised, including attention to process as well as the computer-mediated medium. PMID:17049079

Visualization and Analysis of Impact Damage in Sapphire

DTIC Science & Technology

2011-11-01

transparent armor materials like Starphire soda - lime and borosilicate glass [8], fused silica [9] and the transparent polycrystalline ceramic AlON...conventional glass -based armor when a transparent ceramic is used as strike face on a glass -polymer laminate [1, 2, 3]. Sapphire, i.e. single crystal aluminum...materials. Since part of transparent armor consists of brittle materials, the fragmentation of the ceramic and glass layers plays a key role in the

Towards colorless transparent organic transistors: potential of benzothieno[3,2-b]benzothiophene-based wide-gap semiconductors.

PubMed

Moon, Hanul; Cho, Hyunsu; Kim, Mincheol; Takimiya, Kazuo; Yoo, Seunghyup

2014-05-21

Colorless, highly transparent organic thin-film transistors (TOTFTs) with high performance are realized based on benzothieno[3,2-b]benzothiophene (BTBT) derivatives that simultaneously exhibit a wide energy gap and high transport properties. Multilayer transparent source/drain electrodes maintain the transparency, and ultrathin fluoropolymer dielectric layers enable stable, low-voltage operation of the proposed TOTFTs. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Two-Channel Transparency-Optimized Control Architectures in Bilateral Teleoperation With Time Delay.

PubMed

Kim, Jonghyun; Chang, Pyung Hun; Park, Hyung-Soon

2013-01-01

This paper introduces transparency-optimized control architectures (TOCAs) using two communication channels. Two classes of two-channel TOCAs are found, thereby showing that two channels are sufficient to achieve transparency. These TOCAs achieve a greater level of transparency but poorer stability than three-channel TOCAs and four-channel TOCAs. Stability of the two-channel TOCAs has been enhanced while minimizing transparency degradation by adding a filter; and a combined use of the two classes of two-channel TOCAs is proposed for both free space and constrained motion, which involve switching between two TOCAs for transition between free space and constrained motions. The stability condition of the switched teleoperation system is derived for practical applications. Through the one degree-of-freedom (DOF) experiment, the proposed two-channel TOCAs were shown to operate stably, while achieving better transparency under time delay than the other TOCAs.

Two-Channel Transparency-Optimized Control Architectures in Bilateral Teleoperation With Time Delay

PubMed Central

Kim, Jonghyun; Chang, Pyung Hun; Park, Hyung-Soon

2013-01-01

This paper introduces transparency-optimized control architectures (TOCAs) using two communication channels. Two classes of two-channel TOCAs are found, thereby showing that two channels are sufficient to achieve transparency. These TOCAs achieve a greater level of transparency but poorer stability than three-channel TOCAs and four-channel TOCAs. Stability of the two-channel TOCAs has been enhanced while minimizing transparency degradation by adding a filter; and a combined use of the two classes of two-channel TOCAs is proposed for both free space and constrained motion, which involve switching between two TOCAs for transition between free space and constrained motions. The stability condition of the switched teleoperation system is derived for practical applications. Through the one degree-of-freedom (DOF) experiment, the proposed two-channel TOCAs were shown to operate stably, while achieving better transparency under time delay than the other TOCAs. PMID:23833548

Digital photography and transparency-based methods for measuring wound surface area.

PubMed

Bhedi, Amul; Saxena, Atul K; Gadani, Ravi; Patel, Ritesh

2013-04-01

To compare and determine a credible method of measurement of wound surface area by linear, transparency, and photographic methods for monitoring progress of wound healing accurately and ascertaining whether these methods are significantly different. From April 2005 to December 2006, 40 patients (30 men, 5 women, 5 children) admitted to the surgical ward of Shree Sayaji General Hospital, Baroda, had clean as well as infected wound following trauma, debridement, pressure sore, venous ulcer, and incision and drainage. Wound surface areas were measured by these three methods (linear, transparency, and photographic methods) simultaneously on alternate days. The linear method is statistically and significantly different from transparency and photographic methods (P value <0.05), but there is no significant difference between transparency and photographic methods (P value >0.05). Photographic and transparency methods provided measurements of wound surface area with equivalent result and there was no statistically significant difference between these two methods.

All-dielectric resonant cavity-enabled metals with broadband optical transparency

NASA Astrophysics Data System (ADS)

Liu, Zhengqi; Zhang, Houjiao; Liu, Xiaoshan; Pan, Pingping; Liu, Yi; Tang, Li; Liu, Guiqiang

2017-06-01

Metal films with broadband optical transparency are desirable in many optoelectronic devices, such as displays, smart windows, light-emitting diodes and infrared detectors. As bare metal is opaque to light, this issue of transparency attracts great scientific interest. In this work, we proposed and demonstrated a feasible and universal approach for achieving broadband optical transparent (BOT) metals by utilizing all-dielectric resonant cavities. Resonant dielectrics provide optical cavity modes and couple strongly with the surface plasmons of the metal film, and therefore produce a broadband near-unity optical transparent window. The relative enhancement factor (EF) of light transmission exceeds 3400% in comparison with that of pure metal film. Moreover, the transparent metal motif can be realized by other common metals including gold (Au), silver (Ag) and copper (Cu). These optical features together with the fully retained electric and mechanical properties of a natural metal suggest that it will have wide applications in optoelectronic devices.

Transparent and flexible electrodes and supercapacitors using polyaniline/single-walled carbon nanotube composite thin films

NASA Astrophysics Data System (ADS)

Ge, Jun; Cheng, Guanghui; Chen, Liwei

2011-08-01

Large-scale transparent and flexible electronic devices have been pursued for potential applications such as those in touch sensors and display technologies. These applications require that the power source of these devices must also comply with transparent and flexible features. Here we present transparent and flexible supercapacitors assembled from polyaniline (PANI)/single-walled carbon nanotube (SWNT) composite thin film electrodes. The ultrathin, optically homogeneous and transparent, electrically conducting films of the PANI/SWNT composite show a large specific capacitance due to combined double-layer capacitance and pseudo-capacitance mechanisms. A supercapacitor assembled using electrodes with a SWNT density of 10.0 µg cm-2 and 59 wt% PANI gives a specific capacitance of 55.0 F g-1 at a current density of 2.6 A g-1, showing its possibility for transparent and flexible energy storage.

Thermally Diffused Al:ZnO Thin Films for Broadband Transparent Conductor.

PubMed

Tong, Chong; Yun, Juhyung; Chen, Yen-Jen; Ji, Dengxin; Gan, Qiaoqiang; Anderson, Wayne A

2016-02-17

Here, we report an approach to realize highly transparent low resistance Al-doped ZnO (AZO) films for broadband transparent conductors. Thin Al films are deposited on ZnO surfaces, followed by thermal diffusion processes, introducing the Al doping into ZnO thin films. By utilizing the interdiffusion of Al, Zn, and O, the chemical state of Al on the surfaces can be converted to a fully oxidized state, resulting in a low sheet resistance of 6.2 Ω/sq and an excellent transparency (i.e., 96.5% at 550 nm and higher than 85% up to 2500 nm), which is superior compared with some previously reported values for indium tin oxide, solution processed AZO, and many transparent conducting materials using novel nanostructures. Such AZO films are also applied as transparent conducting layers for AZO/Si heterojunction solar cells, demonstrating their applications in optoelectronic devices.

Transparent and flexible electrodes and supercapacitors using polyaniline/single-walled carbon nanotube composite thin films.

PubMed

Ge, Jun; Cheng, Guanghui; Chen, Liwei

2011-08-01

Large-scale transparent and flexible electronic devices have been pursued for potential applications such as those in touch sensors and display technologies. These applications require that the power source of these devices must also comply with transparent and flexible features. Here we present transparent and flexible supercapacitors assembled from polyaniline (PANI)/single-walled carbon nanotube (SWNT) composite thin film electrodes. The ultrathin, optically homogeneous and transparent, electrically conducting films of the PANI/SWNT composite show a large specific capacitance due to combined double-layer capacitance and pseudo-capacitance mechanisms. A supercapacitor assembled using electrodes with a SWNT density of 10.0 µg cm(-2) and 59 wt% PANI gives a specific capacitance of 55.0 F g(-1) at a current density of 2.6 A g(-1), showing its possibility for transparent and flexible energy storage. This journal is © The Royal Society of Chemistry 2011

Optimizing electrical conductivity and optical transparency of IZO thin film deposited by radio frequency (RF) magnetron sputtering

NASA Astrophysics Data System (ADS)

Zhang, Lei

Transparent conducting oxide (TCO) thin films of In2O3, SnO2, ZnO, and their mixtures have been extensively used in optoelectronic applications such as transparent electrodes in solar photovoltaic devices. In this project I deposited amorphous indium-zinc oxide (IZO) thin films by radio frequency (RF) magnetron sputtering from a In2O3-10 wt.% ZnO sintered ceramic target to optimize the RF power, argon gas flowing rate, and the thickness of film to reach the maximum conductivity and transparency in visible spectrum. The results indicated optimized conductivity and transparency of IZO thin film is closer to ITO's conductivity and transparency, and is even better when the film was deposited with one specific tilted angle. National Science Foundation (NSF) MRSEC program at University of Nebraska Lincoln, and was hosted by Professor Jeff Shields lab.

ERP Evidence for the Activation of Syntactic Structure During Comprehension of Lexical Idiom.

PubMed

Zhang, Meichao; Lu, Aitao; Song, Pingfang

2017-10-01

The present study used event-related potentials to investigate whether the syntactic structure was activated in the comprehension of lexical idioms, and if so, whether it varied as a function of familiarity and semantic transparency. Participants were asked to passively read the "1+2" structural Chinese lexical idioms with each being presented following 3-5 contextual "1+2" (congruent-structure condition) or "2+1" structural Chinese phrases (incongruent-structure condition). The N400 ERP responses showed more positivity in congruent-structure condition relative to incongruent-structure condition in idioms with high familiarity and high semantic transparency, but less positivity in congruent-structure condition in idioms with high familiarity but low semantic transparency, idioms with low familiarity but high semantic transparency, and idioms with low familiarity and low semantic transparency. Our results suggest that syntactic structure, as the unnecessarity of lexical idiomatic words, was nevertheless activated, independent of familiarity and semantic transparency.

Fabrication and Characterization of Fully Transparent ZnO Thin-Film Transistors and Self-Switching Nano-Diodes

NASA Astrophysics Data System (ADS)

Sun, Y.; Ashida, K.; Sasaki, S.; Koyama, M.; Maemoto, T.; Sasa, S.; Kasai, S.; Iñiguez-de-la-Torre, I.; González, T.

2015-10-01

Fully transparent zinc oxide (ZnO) based thin-film transistors (TFTs) and a new type of rectifiers calls self-switching nano-diodes (SSDs) were fabricated on glass substrates at room temperature by using low resistivity and transparent conducting Al- doped ZnO (AZO) thin-films. The deposition conditions of AZO thin-films were optimized with pulsed laser deposition (PLD). AZO thin-films on glass substrates were characterized and the transparency of 80% and resistivity with 1.6*10-3 Ωcm were obtained of 50 nm thickness. Transparent ZnO-TFTs were fabricated on glass substrates by using AZO thin-films as electrodes. A ZnO-TFT with 2 μm long gate device exhibits a transconductance of 400 μS/mm and an ON/OFF ratio of 2.8*107. Transparent ZnO-SSDs were also fabricated by using ZnO based materials and clear diode-like characteristics were observed.

Identification and design principles of low hole effective mass p-type transparent conducting oxides

PubMed Central

Hautier, Geoffroy; Miglio, Anna; Ceder, Gerbrand; Rignanese, Gian-Marco; Gonze, Xavier

2013-01-01

The development of high-performance transparent conducting oxides is critical to many technologies from transparent electronics to solar cells. Whereas n-type transparent conducting oxides are present in many devices, their p-type counterparts are not largely commercialized, as they exhibit much lower carrier mobilities due to the large hole effective masses of most oxides. Here we conduct a high-throughput computational search on thousands of binary and ternary oxides and identify several highly promising compounds displaying exceptionally low hole effective masses (up to an order of magnitude lower than state-of-the-art p-type transparent conducting oxides), as well as wide band gaps. In addition to the discovery of specific compounds, the chemical rationalization of our findings opens new directions, beyond current Cu-based chemistries, for the design and development of future p-type transparent conducting oxides. PMID:23939205

Transmission in Optically Transparent Core Networks

NASA Astrophysics Data System (ADS)

Kilper, Dan; Jensen, Rich; Petermann, Klaus; Karasek, Miroslav

2007-03-01

Scope of Submission

• Optically transparent system design issues, transmission experiments, and field trials
• Optically transparent network architectures and topologies
• Dispersion management in reconfigurable and mesh systems
• Optically transparent network device and sub-system performance, design, characterization and control, including: amplifiers, transmitters, receivers, switches, add/drop multiplexers
• Transient and fault management
• Physical layer system control
• Monitoring and compensation to support transparency
• Wavelength routing and planning as they relate to physical layer transmission
• Hardware cost and configuration optimization for optically transparent networks

Defense Institution Building: The Dynamics of Change in Georgia and the Need for Continuity of Effort

DTIC Science & Technology

2014-03-01

Georgia’s Defence Sector, Transparency International, Georgia. 58Hiscock, “Impatient Reformers,” 123. 59Alasania, Irakli , Minister of Defense of...renew Georgia’s relationship with Russia. According to the current Defense Minister, Irakli Alasania, Georgia is “not going to end up entangled in a...unpublished). 117Joshua Kucera, “The Bug Pit Interview: Georgian Defense Minister Irakli Alasania,” August 1, 2013, http://www.eurasianet.org/node

[Disclosure of conflicts of interest in the Tijdschrift voor Psychiatrie].

PubMed

Bergoets, M; Pieters, G

2009-01-01

Between March 2000 and December 2008 authors disclosed conflicts of interest in 9% of articles in the Tijdschrift voor Psychiatrie. For the same period, in the articles dealing with pharmaceuticals, the percentage of articles containing disclosures of conflict of interest was considerably higher, namely 24%. The policy of the journal with regard to the disclosure of conflicts of interest has helped to promote transparency. Further efforts are needed to encourage authors to disclose conflicts of interest.

The integrated information architecture: a pilot study approach to leveraging logistics management with regard to influenza preparedness.

PubMed

Lin, Chinho; Lin, Chun-Mei; Yen, David C; Wu, Wu-Han

2012-02-01

Pandemic influenza is considered catastrophic to global health, with severe economic and social effects. Consequently, a strategy for the rapid deployment of essential medical supplies used for the prevention of influenza transmission and to alleviate public panic caused by the expected shortage of such supplies needs to be developed. Therefore, we employ integrated information concepts to develop a simulated influenza medical material supply system to facilitate a rapid response to such a crisis. Various scenarios are analyzed to estimate the appropriate inventory policy needed under different pandemic influenza outbreaks, and to establish a mechanism to evaluate the necessary stockpiles of medications and other requirements in the different phases of the pandemic. This study constructed a web-based decision support system framework prototype that displayed transparent data related to medical stockpiles in each district and integrated expert opinion about the best distribution of these supplies in the influenza pandemic scenarios. A data collection system was also designed to gather information through a daily VPN transmitted into one central repository for reporting and distribution purposes. This study provides timely and transparent medical supplies distribution information that can help decision makers to make the appropriate decisions under different pandemic influenza outbreaks, and also attempts to establish a mechanism of evaluating the stockpiles and requirements in the different phases of the pandemic.

[Hybrid 3-D rendering of the thorax and surface-based virtual bronchoscopy in surgical and interventional therapy control].

PubMed

Seemann, M D; Gebicke, K; Luboldt, W; Albes, J M; Vollmar, J; Schäfer, J F; Beinert, T; Englmeier, K H; Bitzer, M; Claussen, C D

2001-07-01

The aim of this study was to demonstrate the possibilities of a hybrid rendering method, the combination of a color-coded surface and volume rendering method, with the feasibility of performing surface-based virtual endoscopy with different representation models in the operative and interventional therapy control of the chest. In 6 consecutive patients with partial lung resection (n = 2) and lung transplantation (n = 4) a thin-section spiral computed tomography of the chest was performed. The tracheobronchial system and the introduced metallic stents were visualized using a color-coded surface rendering method. The remaining thoracic structures were visualized using a volume rendering method. For virtual bronchoscopy, the tracheobronchial system was visualized using a triangle surface model, a shaded-surface model and a transparent shaded-surface model. The hybrid 3D visualization uses the advantages of both the color-coded surface and volume rendering methods and facilitates a clear representation of the tracheobronchial system and the complex topographical relationship of morphological and pathological changes without loss of diagnostic information. Performing virtual bronchoscopy with the transparent shaded-surface model facilitates a reasonable to optimal, simultaneous visualization and assessment of the surface structure of the tracheobronchial system and the surrounding mediastinal structures and lesions. Hybrid rendering relieve the morphological assessment of anatomical and pathological changes without the need for time-consuming detailed analysis and presentation of source images. Performing virtual bronchoscopy with a transparent shaded-surface model offers a promising alternative to flexible fiberoptic bronchoscopy.

Transparent luminescent bulk nanocomposites of polysiloxane embedded with CdS nanocrystallines by a direct dispersion process.

PubMed

Shen, Zhu-Rui; Li, Ya-Li; Liu, Jian-Bin; Chen, Ming-Xia; Hou, Feng; Wang, Li-Qun

2012-03-07

Transparent luminescent bulk nanocomposites of polysiloxane (PSO) embedded with semiconductor nanocrystals (NCs) have been fabricated by the direct dispersion of CdS NCs in alkyl-(poly)siloxane (APS) followed by co-polymerization. The non-polar characteristics of the APS precursor are compatible with the CdS NC surface (oleylamine), which allows the direct dispersion of the CdS NCs without the need of any surfactant exchange. Chemical crosslinking of the NC-APS dispersion via hydrosilylation between Si-H and the vinyl group in APS immobilizes the CdS NCs in the polysiloxane network. Net-shaped three-dimensional bulk transparent polysiloxane/CdS NC composites were obtained by liquid casting of the NC-precursor dispersion and chemical crosslinking. The PSO/CdS NC composites show visible luminescence under ultraviolet excitation and the luminescent color is tunable from blue to red by controlling the NC concentration in the composite. Photoluminescence spectral analyses reveal the origin of the luminescence as being from the defect emission of the CdS NCs (550-900 nm) and an emission from the PSO matrix (380-550 nm). The luminescent spectra covered a wide range from the ultraviolet to the near-infrared region. The luminescence of the PSO/CdS NC nanocomposites was stable without any apparent degradation after exposure to air for a long time. This simple direct dispersion process is feasible for the fabrication of luminescent nanocomposites with useful optical properties for potential applications in optics and photoelectron devices.

Refractive index measurement based on confocal method

NASA Astrophysics Data System (ADS)

An, Zhe; Xu, XiPing; Yang, JinHua; Qiao, Yang; Liu, Yang

2017-10-01

The development of transparent materials is closed to optoelectronic technology. It plays an increasingly important role in various fields. It is not only widely used in optical lens, optical element, optical fiber grating, optoelectronics, but also widely used in the building material, pharmaceutical industry with vessel, aircraft windshield and daily wear glasses.Regard of solving the problem of refractive index measurement in optical transparent materials. We proposed that using the polychromatic confocal method to measuring the refractive index of transparent materials. In this article, we describes the principle of polychromatic confocal method for measuring the refractive index of glass,and sketched the optical system and its optimization. Then we establish the measurement model of the refractive index, and set up the experimental system. In this way, the refractive index of the glass has been calibrated for refractive index experiment. Due to the error in the experimental process, we manipulated the experiment data to compensate the refractive index measurement formula. The experiment taking the quartz glass for instance. The measurement accuracy of the refractive index of the glass is +/-1.8×10-5. This method is more practical and accurate, especially suitable for non-contact measurement occasions, which environmental requirements is not high. Environmental requirements are not high, the ordinary glass production line up to the ambient temperature can be fully adapted. There is no need for the color of the measured object that you can measure the white and a variety of colored glass.

Budget transparency on maternal health spending: a case study in five Latin American countries.

PubMed

Malajovich, Laura; Alcalde, Maria Antonieta; Castagnaro, Kelly; Barroso, Carmen

2012-06-01

Progress in reducing maternal mortality has been slow and uneven, including in Latin America, where 23,000 women die each year from preventable causes. This article is about the challenges civil society organizations in Latin America faced in assessing budget transparency on government spending on specific aspects of maternity care, in order to hold them accountable for reducing maternal deaths. The study was carried out by the International Planned Parenthood, Western Hemisphere Region and the International Budget Partnership in five Latin American countries--Costa Rica, El Salvador, Guatemala, Panama and Peru. It found that only in Peru was most of the information they sought available publicly (from a government website). In the other four countries, none of the information was available publicly, and although it was possible to obtain at least some data from ministry and health system sources, the search process often took a complex course. The data collected in each country were very different, depending not only on the level of budget transparency, but also on the existence and form of government data collection systems. The obstacles that these civil society organizations faced in monitoring national and local budget allocations for maternal health must be addressed through better budgeting modalities on the part of governments. Concrete guidelines are also needed for how governments can better capture data and track local and national progress. Copyright © 2012 Reproductive Health Matters. Published by Elsevier Ltd. All rights reserved.

An Integrated Framework for Gender Equity in Academic Medicine.

PubMed

Westring, Alyssa; McDonald, Jennifer M; Carr, Phyllis; Grisso, Jeane Ann

2016-08-01

In 2008, the National Institutes of Health funded 14 R01 grants to study causal factors that promote and support women's biomedical careers. The Research Partnership on Women in Biomedical Careers, a multi-institutional collaboration of the investigators, is one product of this initiative.A comprehensive framework is needed to address change at many levels-department, institution, academic community, and beyond-and enable gender equity in the development of successful biomedical careers. The authors suggest four distinct but interrelated aspects of culture conducive to gender equity: equal access to resources and opportunities, minimizing unconscious gender bias, enhancing work-life balance, and leadership engagement. They review the collection of eight articles in this issue, which each address one or more of the four dimensions of culture. The articles suggest that improving mentor-mentee fit, coaching grant reviewers on unconscious bias, and providing equal compensation and adequate resources for career development will contribute positively to gender equity in academic medicine.Academic medicine must adopt an integrated perspective on culture for women and acknowledge the multiple facets essential to gender equity. To effect change, culture must be addressed both within and beyond academic health centers (AHCs). Leaders within AHCs must examine their institutions' processes, resources, and assessment for fairness and transparency; mobilize personnel and financial resources to implement evidence-based initiatives; and assign accountability for providing transparent progress assessments. Beyond AHCs, organizations must examine their operations and implement change to ensure parity of funding, research, and leadership opportunities as well as transparency of assessment and accreditation.

Transparency in the reporting of in vivo pre-clinical pain research: The relevance and implications of the ARRIVE (Animal Research: Reporting In Vivo Experiments) guidelines.

PubMed

Rice, Andrew S C; Morland, Rosemary; Huang, Wenlong; Currie, Gillian L; Sena, Emily S; Macleod, Malcolm R

2017-12-29

Clear reporting of research is crucial to the scientific process. Poorly designed and reported studies are damaging not only to the efforts of individual researchers, but also to science as a whole. Standardised reporting methods, such as those already established for reporting randomised clinical trials, have led to improved study design and facilitated the processes of clinical systematic review and meta-analysis. Such standards were lacking in the pre-clinical field until the development of the ARRIVE (Animal Research: Reporting In Vivo Experiments) guidelines. These were prompted following a survey which highlighted a widespread lack of robust and consistent reporting of pre-clinical in vivo research, with reports frequently omitting basic information required for study replication and quality assessment. The resulting twenty item checklist in ARRIVE covers all aspects of experimental design with particular emphasis on bias reduction and methodological transparency. Influential publishers and research funders have already adopted ARRIVE. Further dissemination and acknowledgement of the importance of these guidelines is vital to their widespread implementation. Conclusions and implications Wide implementation of the ARRIVE guidelines for reporting of in vivo preclinical research, especially pain research, are essential for a much needed increased transparency and quality in publishing such research. ARRIVE will also positively influence improvements in experimental design and quality, assist the conduct of accurate replication studies of important new findings and facilitate meta-analyses of preclinical research.

Enhancing the reporting and transparency of rheumatology research: a guide to reporting guidelines

PubMed Central

2013-01-01

Manuscripts and abstracts from biomedical journals frequently do not contain proper information for meeting required standards and serving the multiple needs of their end users. Reporting guidelines and checklists help researchers to meet those standards by providing rules or principles for specific research areas. Rheumatology research includes a broad range of heterogeneous research areas, each with its own requirements, producing several distinct categories of articles. Our objectives with this article are to raise awareness of the existence and importance of reporting guidelines, to present a structured overview of reporting guidelines that rheumatology journals could apply, and to encourage their use by journal authors, editors, and reviewers, including those of Arthritis Research & Therapy. Internationally recognized reporting guidelines exist for a diversity of research areas. We encourage colleagues to consult the 'Enhancing the QUAlity and Transparency Of health Research' (EQUATOR) network when writing scientific papers. EQUATOR is an international initiative that seeks to improve the reliability and value of biomedical research literature by promoting transparent and accurate reporting of studies. We propose specific reporting guidelines for a number of study designs: animal research, randomized trials, reliability and agreement studies, systematic reviews with and without meta-analyses, diagnostic test accuracy studies, and also observational research including cross-sectional, cohort, and case-control studies. We encourage authors, editors, and reviewers to adhere to and enforce the use of the appropriate guidelines when writing, reading, and reviewing scientific papers. PMID:23448311

Transparency and oversight in local wellness policies.

PubMed

Chriqui, Jamie F; Chaloupka, Frank J

2011-02-01

Advocates have called for increased wellness policy transparency and oversight through the use of health advisory councils. This study examines (1) wellness policy transparency, (2) advisory council requirements, (3) factors associated with each, and (4) whether transparency or advisory council requirements are indicative of a stronger policy addressing nutrition and physical activity. Policies for school year 2007-2008 were obtained from a nationally representative sample of 641 districts and analyzed for their applicability to elementary, middle, and high school levels. Main outcome measures included (1) policy transparency (online availability), (2) advisory council requirements, and (3) overall policy strength. T-tests assessed variability in policy strength by transparency and advisory council requirements. Multivariate logistic and linear regression analyses controlled for district size, socioeconomic status, race/ethnicity, region, and locale; models of advisory council/policy strength relationships also controlled for state advisory council requirements. More than 41% of districts posted wellness policies online and more than 43% required advisory councils. Transparency was less likely in small-/medium-sized and non-southern districts; and, for elementary school policies, most common in majority Hispanic districts. Advisory council requirements were less likely in small-/medium-sized districts for middle/high school policies and more likely in majority Hispanic districts for elementary school policies. After adjusting for all covariates, transparency was not associated with policy strength, but advisory council requirements significantly predicted policy strength. Transparency may facilitate awareness, but it does not mean that wellness policies will be stronger; however, advisory council requirements may be a marker for stronger policies. © 2011, American School Health Association.

Intelligent Agent Transparency in Human-Agent Teaming for Multi-UxV Management.

PubMed

Mercado, Joseph E; Rupp, Michael A; Chen, Jessie Y C; Barnes, Michael J; Barber, Daniel; Procci, Katelyn

2016-05-01

We investigated the effects of level of agent transparency on operator performance, trust, and workload in a context of human-agent teaming for multirobot management. Participants played the role of a heterogeneous unmanned vehicle (UxV) operator and were instructed to complete various missions by giving orders to UxVs through a computer interface. An intelligent agent (IA) assisted the participant by recommending two plans-a top recommendation and a secondary recommendation-for every mission. A within-subjects design with three levels of agent transparency was employed in the present experiment. There were eight missions in each of three experimental blocks, grouped by level of transparency. During each experimental block, the IA was incorrect three out of eight times due to external information (e.g., commander's intent and intelligence). Operator performance, trust, workload, and usability data were collected. Results indicate that operator performance, trust, and perceived usability increased as a function of transparency level. Subjective and objective workload data indicate that participants' workload did not increase as a function of transparency. Furthermore, response time did not increase as a function of transparency. Unlike previous research, which showed that increased transparency resulted in increased performance and trust calibration at the cost of greater workload and longer response time, our results support the benefits of transparency for performance effectiveness without additional costs. The current results will facilitate the implementation of IAs in military settings and will provide useful data to the design of heterogeneous UxV teams. © 2016, Human Factors and Ergonomics Society.

Transparent organic light-emitting diodes with balanced white emission by minimizing waveguide and surface plasmonic loss.

PubMed

Zhang, Yi-Bo; Ou, Qing-Dong; Li, Yan-Qing; Chen, Jing-De; Zhao, Xin-Dong; Wei, Jian; Xie, Zhong-Zhi; Tang, Jian-Xin

2017-07-10

It is challenging in realizing high-performance transparent organic light-emitting diodes (OLEDs) with symmetrical light emission to both sides. Herein, an efficient transparent OLED with highly balanced white emission to both sides is demonstrated by integrating quasi-periodic nanostructures into the organic emitter and the metal-dielectric composite top electrode, which can simultaneously suppressing waveguide and surface plasmonic loss. The power efficiency and external quantum efficiency are raised to 83.5 lm W -1 and 38.8%, respectively, along with a bi-directional luminance ratio of 1.26. The proposed scheme provides a facile route for extending application scope of transparent OLEDs for future transparent displays and lightings.

Preschoolers' use of reflective properties: identification of reflections on partially transparent surfaces.

PubMed

Costanzo, E S; Wittgenstein, K M; Benson, K

2001-12-01

This exploratory study extended past studies of children's ability to reference the mirror as a tool in locating the source of reflected images to preschoolers' ability to use the affordances of a transparency. Thirty-six children (3.5 to 5 years old) were shown nonreflected lights and lights reflected on a partially transparent, glassy surface. Children did not spontaneously locate the source of the reflected image. However, they were able to verbally discriminate reflected from nonreflected images following training. These findings indicate that, although preschoolers may not spontaneously use transparencies as a perceptual tool, the ability to distinguish visual differences of reflected from nonreflected images on transparencies is likely within preschool children's developmental capacity.

Flexible transparent conducting hybrid film using a surface-embedded copper nanowire network: a highly oxidation-resistant copper nanowire electrode for flexible optoelectronics.

PubMed

Im, Hyeon-Gyun; Jung, Soo-Ho; Jin, Jungho; Lee, Dasom; Lee, Jaemin; Lee, Daewon; Lee, Jung-Yong; Kim, Il-Doo; Bae, Byeong-Soo

2014-10-28

We report a flexible high-performance conducting film using an embedded copper nanowire transparent conducting electrode; this material can be used as a transparent electrode platform for typical flexible optoelectronic devices. The monolithic composite structure of our transparent conducting film enables simultaneously an outstanding oxidation stability of the copper nanowire network (14 d at 80 °C), an exceptionally smooth surface topography (R(rms) < 2 nm), and an excellent opto-electrical performances (Rsh = 25 Ω sq(-1) and T = 82%). A flexible organic light emitting diode device is fabricated on the transparent conducting film to demonstrate its potential as a flexible copper nanowire electrode platform.

Wave-mixing-induced transparency with zero phase shift in atomic vapors

NASA Astrophysics Data System (ADS)

Zhou, F.; Zhu, C. J.; Li, Y.

2017-12-01

We present a wave-mixing induced transparency that can lead to a hyper-Raman gain-clamping effect. This new type of transparency is originated from a dynamic gain cancellation effect in a multiphoton process where a highly efficient light field of new frequency is generated and amplified. We further show that this novel dynamic gain cancellation effect not only makes the medium transparent to a probe light field at appropriate frequency but also eliminates the probe field propagation phase shift. This gain-cancellation-based induced transparency holds for many potential applications on optical communication and may lead to effective suppression of parasitic Raman/hyper-Raman noise field generated in high intensity optical fiber transmissions.

Test of the cosmic transparency with the standard candles and the standard ruler

NASA Astrophysics Data System (ADS)

Chen, Jun

In this paper, the cosmic transparency is constrained by using the latest baryon acoustic oscillation (BAO) data and the type Ia supernova data with a model-independent method. We find that a transparent universe is consistent with observational data at the 1σ confidence level, except for the case of BAO+ Union 2.1 without the systematic errors where a transparent universe is favored only at the 2σ confidence level. To investigate the effect of the uncertainty of the Hubble constant on the test of the cosmic opacity, we assume h to be a free parameter and obtain that the observations favor a transparent universe at the 1σ confidence level.

Fast, Dense Low Cost Scintillator for Nuclear Physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woody, Craig

2009-07-31

We have studied the morphology, transparency, and optical properties of SrHfO{sub 3}:Ce ceramics. Ceramics can be made transparent by carefully controlling the stoichiometry of the precursor powders. When fully dense, transparent samples can be obtained. Ceramics with a composition close to stoichiometry (Sr:Hf ~ 1) appear to show good transparency and a reasonable light yield several times that of BGO. The contact and distance transparency of ceramics hot-pressed at about 1450ºC is very good, but deteriorates at increasingly higher hot-press temperatures. If these ceramics can be produced in large quantities and sizes, at low cost, they may be of considerablemore » interest for PET and CT.« less

Mid-twentieth-century anatomical transparencies and the depiction of three-dimensional form.

PubMed

Wall, Shelley

2010-11-01

Before the advent of digital visualization, the "anatomical transparency"--layered images of organ systems, printed on a transparent medium--flourished in the mid-twentieth century as an interactive means to represent complex anatomical relationships to medical professionals and lay audiences. This article introduces the transparency work of medical illustrators Gladys McHugh and Ernest W. Beck, situating it in the historical context of strategies to represent three-dimensional anatomical relationships using print media.

Transparency has its limits. Questions arise about why the transparency-preaching Blues association is getting quiet about its members' fiscal results.

PubMed

Benko, Laura B

2006-08-07

The Blue Cross and Blue Shield Association was touting its plans' devotion to transparency last week, unveiling a database offering insight into a variety of healthcare trends. But some are doubting the Blues' sincerity, given the association's decision to withhold aggregate plan financial results. "It seems very inconsistent with their new emphasis on transparency and empowering people with information," says Bruce McPherson, left.

Constructing a European healthcare market: the private healthcare company Capio and the strategic aspect of the drive for transparency.

PubMed

Blomgren, Maria; Sundén, Eva

2008-11-01

This article analyses the private healthcare company Capio and its participation in the drive for transparency in the European healthcare field. An important point of departure for the paper is that technologies for transparency, such as accounting and auditing, are not neutral devices for increased openness, but carry with them programmatic dimensions that affect our norms and rules of how healthcare is to be organized and controlled. The drive for transparency engages different actors with various motives. To investigate this we carried out semi-structured interviews with 11 persons, mainly management members of Capio. We show that transparency in healthcare has been put forward by a private actor for strategic reasons. We argue that Capio's involvement in the drive for transparency should be seen as a 'second-order strategy' with the aim to create advantageous opportunities in a future European healthcare market. We show that Capio, through its propagation of various transparency technologies, has put forward programmatic ideals of industrialisation, marketisation and Europeanisation in healthcare. The main conclusion is that although Capio has engaged in the drive for transparency for business reasons, the company has also furthered certain political ideals in the field. This study contributes to the literature which problematizes the division between private and public, and between business and politics in healthcare, and is of interest to a broad health policy audience.

Hazy Transparent Cellulose Nanopaper

PubMed Central

Hsieh, Ming-Chun; Koga, Hirotaka; Suganuma, Katsuaki; Nogi, Masaya

2017-01-01

The aim of this study is to clarify light scattering mechanism of hazy transparent cellulose nanopaper. Clear optical transparent nanopaper consists of 3–15 nm wide cellulose nanofibers, which are obtained by the full nanofibrillation of pulp fibers. At the clear transparent nanopaper with 40 μm thickness, their total transmittance are 89.3–91.5% and haze values are 4.9–11.7%. When the pulp fibers are subjected to weak nanofibrillation, hazy transparent nanopapers are obtained. The hazy transparent nanopaper consists of cellulose nanofibers and some microsized cellulose fibers. At the hazy transparent nanopaper with 40 μm thickness, their total transmittance were constant at 88.6–92.1% but their haze value were 27.3–86.7%. Cellulose nanofibers are solid cylinders, whereas the pulp fibers are hollow cylinders. The hollow shape is retained in the microsized cellulose fibers, but they are compressed flat inside the nanopaper. This compressed cavity causes light scattering by the refractive index difference between air and cellulose. As a result, the nanopaper shows a hazy transparent appearance and exhibits a high thermal durability (295–305 °C), and low thermal expansion (8.5–10.6 ppm/K) because of their high density (1.29–1.55 g/cm3) and crystallinity (73–80%). PMID:28128326

Oxide semiconductors for organic opto-electronic devices

NASA Astrophysics Data System (ADS)

Sigdel, Ajaya K.

In this dissertation, I have introduced various concepts on the modulations of various surface, interface and bulk opto-electronic properties of ZnO based semiconductor for charge transport, charge selectivity and optimal device performance. I have categorized transparent semiconductors into two sub groups depending upon their role in a device. Electrodes, usually 200 to 500 nm thick, optimized for good transparency and transporting the charges to the external circuit. Here, the electrical conductivity in parallel direction to thin film, i.e bulk conductivity is important. And contacts, usually 5 to 50 nm thick, are optimized in case of solar cells for providing charge selectivity and asymmetry to manipulate the built in field inside the device for charge separation and collection. Whereas in Organic LEDs (OLEDs), contacts provide optimum energy level alignment at organic oxide interface for improved charge injections. For an optimal solar cell performance, transparent electrodes are designed with maximum transparency in the region of interest to maximize the light to pass through to the absorber layer for photo-generation, plus they are designed for minimum sheet resistance for efficient charge collection and transport. As such there is need for material with high conductivity and transparency. Doping ZnO with some common elements such as B, Al, Ga, In, Ge, Si, and F result in n-type doping with increase in carriers resulting in high conductivity electrode, with better or comparable opto-electronic properties compared to current industry-standard indium tin oxide (ITO). Furthermore, improvement in mobility due to improvement on crystallographic structure also provide alternative path for high conductivity ZnO TCOs. Implementing these two aspects, various studies were done on gallium doped zinc oxide (GZO) transparent electrode, a very promising indium free electrode. The dynamics of the superimposed RF and DC power sputtering was utilized to improve the microstructure during the thin films growth, resulting in GZO electrode with conductivity greater than 4000 S/cm and transparency greater than ˜ 90%. Similarly, various studies on research and development of Indium Zinc Tin Oxide and Indium Zinc Oxide thin films which can be applied to flexible substrates for next generation solar cells application is presented. In these new TCO systems, understanding the role of crystallographic structure ranging from poly-crystalline to amorphous phase and the influence on the charge transport and optical transparency as well as important surface passivation and surface charge transport properties. Implementation of these electrode based on ZnO on opto-electronics devices such as OLED and OPV is complicated due to chemical interaction over time with the organic layer or with ambient. The problem of inefficient charge collection/injection due to poor understanding of interface and/or bulk property of oxide electrode exists at several oxide-organic interfaces. The surface conductivity, the work function, the formation of dipoles and the band-bending at the interfacial sites can positively or negatively impact the device performance. Detailed characterization of the surface composition both before and after various chemicals treatment of various oxide electrode can therefore provide insight into optimization of device performance. Some of the work related to controlling the interfacial chemistry associated with charge transport of transparent electrodes are discussed. Thus, the role of various pre-treatment on poly-crystalline GZO electrode and amorphous indium zinc oxide (IZO) electrode is compared and contrasted. From the study, we have found that removal of defects and self passivating defects caused by accumulation of hydroxides in the surface of both poly-crystalline GZO and amorphous IZO, are critical for improving the surface conductivity and charge transport. Further insight on how these insulating and self-passivating defects cause charge accumulation and recombination in an device is discussed. (Abstract shortened by UMI.)

Pharmaceuticals--strategic considerations in health reforms in Pakistan.

PubMed

Nishtar, Sania

2006-12-01

Pharmaceuticals are critical to the functioning of healthcare systems which require a sustainable supply of quality, efficacious, and safe essential medicines. With this as a context, the Gateway Paper in its capacity as a suggested roadmap for health reforms within Pakistan stressed on the need for a pharmaceutical policy to be directed towards improving people's access to medicines; within this framework a number of issues have been highlighted. Weaknesses in the current legislation on drugs, in particular gaps, which have emerged contemporaneously with reference to the post WTO situation and the technology boom, have been discussed and the incongruity between the drug policies and policies in the other sectors addressed. The Gateway Paper makes a strong case to establish a statutory semi-autonomous drug regulatory authority in order to ensure stricter implementation of the Drug Law, which needs to be amended to bridge the current gaps. The paper lays emphasis on a formal quality assurance mechanism and the need to build capacity to implement regulation in this regard. Lack of clarity in the current pricing formula has been flagged as a key issue and the need highlighted to develop a pricing formula that is predictable, transparent and acceptable to the stakeholders, yet one that does not create access and affordability issues for the poor and disadvantaged. The paper addresses gaps in the process of drug registration in Pakistan and stresses on the need to redefine its scope and ensure its stricter enforcement. Unethical market practices and irrational use of drugs have been discussed and the need for transparently implementing standard operating procedures for drug selecting, procurement, storage, dispensing and rational prescribing and the introduction of appropriate evidence based education, managerial and regulatory interventions in this regard, highlighted. The myriad of reasons which lead to the shortage of drugs and to the mushrooming of spurious, counterfeit and sub-standard drugs in the market have also been the subject of discussion as have been issues relating to the present size and utilization of the National Essential Drug List.

Student Perceptions of Teaching Transparency

ERIC Educational Resources Information Center

Anderson, Alecia D.; Hunt, Andrea N.; Powell, Rachel E.; Dollar, Cindy Brooks

2013-01-01

The authors discuss the relationship between teaching transparency and active learning through the perspectives of their students. Active learning directly engages students in the learning process while transparency involves the instructor's divulgence of logic regarding course organization and activity choices. After utilizing these teaching…

Accessible and inexpensive tools for global HPAI surveillance: A mobile-phone based system.

PubMed

Lin, Yibo; Heffernan, Claire

2011-02-01

Highly pathogenic avian influenza (HPAI) disproportionately impacts poor livestock keepers in southern countries. Although the estimated cost of the disease in the billions, response to the epidemic remains fragmented and information channels slow. Given the continuing threat of outbreaks, and what appears to be the politicisation of outbreak reporting, new tools are needed to enforce transparency in stakeholder communication. In response to this need, we created a mobile-phone based surveillance system to aid critical information transfer among policy makers, practitioners and the poor themselves. The tool operates at the local, national and global levels and further links decision-makers to international databases. Copyright © 2010 Elsevier B.V. All rights reserved.

Mitigating the Health Risks of Dining Out: The Need for Standardized Portion Sizes in Restaurants

PubMed Central

Story, Mary

2014-01-01

Because restaurants routinely serve food with more calories than people need, dining out represents a risk factor for overweight, obesity, and other diet-related chronic diseases. Most people lack the capacity to judge the caloric content of food and there is limited evidence that people make use of calorie-labeling information when it is available. Standardized portion sizes would not preclude people from eating as much as they want, but would make the amount they are getting fully transparent. We describe the potential benefits and means of implementing a system of standardized portion sizes that might facilitate a healthier diet among the US population. PMID:24524513

Promoting transparency, accountability, and access through a multi-stakeholder initiative: lessons from the medicines transparency alliance.

PubMed

Vian, Taryn; Kohler, Jillian C; Forte, Gilles; Dimancesco, Deirdre

2017-01-01

Barriers to expanding access to medicines include weak pharmaceutical sector governance, lack of transparency and accountability, inadequate attention to social services on the political agenda, and financing challenges. Multi-stakeholder initiatives such as the Medicines Transparency Alliance (MeTA) may help overcome these barriers. Between 2008 and 2015, MeTA engaged stakeholders in the pharmaceutical sectors of seven countries (Ghana, Jordan, Kyrgyzstan, Peru, Philippines, Uganda, and Zambia) to promote access goals through greater transparency. We reviewed archival data to document MeTA activities and results related to transparency and accountability in the seven countries where it was implemented. We identified common themes and content areas, noting specific activities used to make information transparent and accessible, how data were used to inform discussions, and the purpose and timing of meetings and advocacy activities to help set priorities and influence governance decisions. The cross-case analysis looked for pathways which might link the MeTA strategies to results such as better policies or program improvements. Countries used evidence gathering, open meetings, and proactive information dissemination to increase transparency. MeTA fostered policy dialogue to bring together the many government, civil society and private company stakeholders concerned with access issues, and provided them with information to understand barriers to access at policy, organizational, and community levels. We found strong evidence that transparency was enhanced. Some evidence suggests that MeTA efforts contributed to new policies and civil society capacity strengthening although the impact on government accountability is not clear. MeTA appears to have achieved its goal of creating a multi-stakeholder shared policy space in which government, civil society, and private sector players can come together and have a voice in the national pharmaceutical policy making process. Assuming that transparency is in place to leverage accountability, the success of MeTA's efforts to promote accountability by the government as well as other stakeholders in the pharmaceutical sector will depend on how well efforts are sustained over time.

Measurement of transparency ratios for protons from short-range correlated pairs

NASA Astrophysics Data System (ADS)

Hen, O.; Hakobyan, H.; Shneor, R.; Piasetzky, E.; Weinstein, L. B.; Brooks, W. K.; May-Tal Beck, S.; Gilad, S.; Korover, I.; Beck, A.; Adhikari, K. P.; Aghasyan, M.; Amaryan, M. J.; Anefalos Pereira, S.; Arrington, J. R.; Baghdasaryan, H.; Ball, J.; Battaglieri, M.; Batourine, V.; Bedlinskiy, I.; Biselli, A. S.; Bono, J.; Boiarinov, S.; Briscoe, W. J.; Burkert, V. D.; Carman, D. S.; Celentano, A.; Chandavar, S.; Cole, P. L.; Contalbrigo, M.; Crede, V.; D'Angelo, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Deur, A.; Djalali, C.; Dodge, G. E.; Doughty, D.; Dupre, R.; Egiyan, H.; El Alaoui, A.; El Fassi, L.; Eugenio, P.; Fedotov, G.; Fegan, S.; Fleming, J. A.; Gabrielyan, M. Y.; Gevorgyan, N.; Gilfoyle, G. P.; Giovanetti, K. L.; Girod, F. X.; Goetz, J. T.; Gohn, W.; Golovatch, E.; Gothe, R. W.; Griffioen, K. A.; Guo, L.; Hafidi, K.; Harrison, N.; Heddle, D.; Hicks, K.; Holtrop, M.; Hyde, C. E.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jo, H. S.; Joo, K.; Keller, D.; Khandaker, M.; Khetarpal, P.; Kim, A.; Klein, F. J.; Koirala, S.; Kubarovsky, A.; Kubarovsky, V.; Kuhn, S. E.; Livingston, K.; Lu, H. Y.; MacGregor, I. J. D.; Martinez, D.; Mayer, M.; McKinnon, B.; Mineeva, T.; Mokeev, V.; Montgomery, R. A.; Moutarde, H.; Munevar, E.; Munoz Camacho, C.; Mustapha, B.; Nadel-Turonski, P.; Nasseripour, R.; Niccolai, S.; Niculescu, G.; Niculescu, I.; Osipenko, M.; Ostrovidov, A. I.; Pappalardo, L. L.; Paremuzyan, R.; Park, K.; Park, S.; Pasyuk, E.; Phelps, E.; Phillips, J. J.; Pisano, S.; Pivnyuk, N.; Pogorelko, O.; Pozdniakov, S.; Price, J. W.; Procureur, S.; Protopopescu, D.; Puckett, A. J. R.; Raue, B. A.; Rimal, D.; Ripani, M.; Ritchie, B. G.; Rosner, G.; Rossi, P.; Sabatié, F.; Saini, M. S.; Schott, D.; Schumacher, R. A.; Seraydaryan, H.; Sharabian, Y. G.; Smith, G. D.; Sober, D. I.; Sokhan, D.; Stepanyan, S. S.; Stepanyan, S.; Strauch, S.; Taiuti, M.; Tang, W.; Taylor, C. E.; Tian, Ye; Tkachenko, S.; Ungaro, M.; Vernarsky, B.; Vlassov, A.; Voskanyan, H.; Voutier, E.; Walford, N. K.; Watts, D. P.; Wood, M. H.; Zachariou, N.; Zana, L.; Zhang, J.; Zheng, X.; Zonta, I.

2013-05-01

Nuclear transparency, Tp (A), is a measure of the average probability for a struck proton to escape the nucleus without significant re-interaction. Previously, nuclear transparencies were extracted for quasi-elastic A (e ,e‧ p) knockout of protons with momentum below the Fermi momentum, where the spectral functions are well known. In this Letter we extract a novel observable, the transparency ratio, Tp (A) /Tp(12 C), for knockout of high-missing-momentum protons from the breakup of short-range correlated pairs (2N-SRC) in Al, Fe and Pb nuclei relative to C. The ratios were measured at momentum transfer Q2 ⩾ 1.5(GeV /c) 2 and xB ⩾ 1.2 where the reaction is expected to be dominated by electron scattering from 2N-SRC. The transparency ratios of the knocked-out protons coming from 2N-SRC breakup are 20-30% lower than those of previous results for low missing momentum. They agree with Glauber calculations and agree with renormalization of the previously published transparencies as proposed by recent theoretical investigations. The new transparencies scale as A - 1 / 3, which is consistent with dominance of scattering from nucleons at the nuclear surface.

An optically transparent, flexible, patterned and conductive silk biopolymer film (Conference Presentation)

NASA Astrophysics Data System (ADS)

Umar, Muhammad; Min, Kyungtaek; Kim, Sunghwan

2017-02-01

Transparent, flexible, and conducting films are of great interest for wearable electronics. For better biotic/abiotic interface, the films to integrate the electronics components requires the patterned surface conductors with optical transparency, smoothness, good electrical conductivity, along with the biofriendly traits of films. We focus on silk fibroin, a natural biopolymer extracted from the Bombyx mori cocoons, for this bioelectronics applications. Here we report an optically transparent, flexible, and patterned surface conductor on a silk film by burying a silver nanowires (AgNW) network below the surface of the silk film. The conducting silk film reveals high optical transparency of 80% and the excellent electronic conductivity of 15 Ω/sq, along with smooth surface. The integration of light emitting diode (LED) chip on the patterned electrodes confirms that the current can flow through the transparent and patterned electrodes on the silk film, and this result shows an application for integration of functional electronic/opto-electronic devices. Additionally, we fabricate a transparent and flexible radio frequency (RF) antenna and resistor on a silk film and apply these as a food sensor by monitoring the increasing resistance by the flow of gases from the spoiled food.

Influence of AZO stair-like transparent layers on GaN-based light-emitting diodes

NASA Astrophysics Data System (ADS)

Liou, Syuan-Hao; Tsai, Jung-Hui; Liu, Wen-Chau; Lin, Pao-Sheng; Chen, Yu-Chi

2017-10-01

The GaN-based light-emitting diodes (LEDs) with various height ratios of aluminum-doped zinc oxide (AZO) stair-like transparent layers are fabricated and comparatively investigated. The characteristics of the LEDs with conventional plane AZO transparent layer (device A) and AZO stair-like transparent layers having height ratios of 1:1:1 (device B), 1.5:1:0.5 (device C), and 0.5:1:1.5 (device D) are compared. Attributed that the lower resistance is formed in the thinner AZO film of the stair-like structure, the current crowding effect is improved for extending the whole current-spreading area. Experimentally, the forward turn-on voltages of the LEDs are reduced from 3.68 V to 3.42 V as the plane AZO transparent layer is processed to form the stair-like transparent layers with height ratio of 1:1:1. In addition, the light luminous flux, output power, external quantum efficiency, and wall-plug efficiency of the device B are enhanced by 30.5, 12.1, 22.2, and 20.7%, respectively, as compared to the traditional device with plane AZO transparent layer.

Design of an organic redox mediator and optimization of an organic counter electrode for efficient transparent bifacial dye-sensitized solar cells.

PubMed

Li, Xiong; Ku, Zhiliang; Rong, Yaoguang; Liu, Guanghui; Liu, Linfeng; Liu, Tongfa; Hu, Min; Yang, Ying; Wang, Heng; Xu, Mi; Xiang, Peng; Han, Hongwei

2012-11-07

A new thiolate/disulfide mediator was designed and synthesized by employing DFT calculations as a guide. It possesses high transparency to visible light, a very attractive feature for bifacially active transparent DSCs that require a highly transparent counter electrode (CE). Compared to the reported and most promising thiolate/disulfide mediator T(-)/T(2), this new analogous mediator produced a major enhancement in open circuit potential (V(OC)) by about 40 mV and correspondingly a higher power conversion efficiency (η) for DSCs. Furthermore, a highly uniform and transparent (transmittance > 91%) poly(3,4-ethylenedioxythiophene) (PEDOT(BE)) CE was prepared and could efficiently catalyze the reduction of the disulfide. Based on the novel transparent redox couple and PEDOT(BE) CE, a new type of iodine-free and Pt-free transparent bifacial DSC was successfully fabricated. This new bifacial device could not only yield a promising front-illuminated η of 6.07%, but also produce an attractive η as high as 4.35% for rear-side irradiation, which exceeds the rear-illuminated η of 3.93% achieved for the same type of device, employing the dark-colored I(-)/I(3)(-) electrolyte.

The effect of semantic transparency on the processing of morphologically derived words: Evidence from decision latencies and event-related potentials.

PubMed

Jared, Debra; Jouravlev, Olessia; Joanisse, Marc F

2017-03-01

Decomposition theories of morphological processing in visual word recognition posit an early morpho-orthographic parser that is blind to semantic information, whereas parallel distributed processing (PDP) theories assume that the transparency of orthographic-semantic relationships influences processing from the beginning. To test these alternatives, the performance of participants on transparent (foolish), quasi-transparent (bookish), opaque (vanish), and orthographic control words (bucket) was examined in a series of 5 experiments. In Experiments 1-3 variants of a masked priming lexical-decision task were used; Experiment 4 used a masked priming semantic decision task, and Experiment 5 used a single-word (nonpriming) semantic decision task with a color-boundary manipulation. In addition to the behavioral data, event-related potential (ERP) data were collected in Experiments 1, 2, 4, and 5. Across all experiments, we observed a graded effect of semantic transparency in behavioral and ERP data, with the largest effect for semantically transparent words, the next largest for quasi-transparent words, and the smallest for opaque words. The results are discussed in terms of decomposition versus PDP approaches to morphological processing. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

High carrier concentration p-type transparent conducting oxide films

DOEpatents

Yan, Yanfa; Zhang, Shengbai

2005-06-21

A p-type transparent conducting oxide film is provided which is consisting essentially of, the transparent conducting oxide and a molecular doping source, the oxide and doping source grown under conditions sufficient to deliver the doping source intact onto the oxide.

78 FR 6342 - U.S. Extractive Industries Transparency Initiative Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-30

... Industries Transparency Initiative Advisory Committee AGENCY: Interior, Office of the Secretary. ACTION... Initiative Advisory Committee will meet as indicated below. DATES: Wednesday, February 13, 2013, from 8:30 a... Transparency Initiative (EITI). The Committee includes representatives from Government agencies, extractive...

Brightness and transparency in the early visual cortex.

PubMed

Salmela, Viljami R; Vanni, Simo

2013-06-24

Several psychophysical studies have shown that transparency can have drastic effects on brightness and lightness. However, the neural processes generating these effects have remained unresolved. Several lines of evidence suggest that the early visual cortex is important for brightness perception. While single cell recordings suggest that surface brightness is represented in the primary visual cortex, the results of functional magnetic resonance imaging (fMRI) studies have been discrepant. In addition, the location of the neural representation of transparency is not yet known. We investigated whether the fMRI responses in areas V1, V2, and V3 correlate with brightness and transparency. To dissociate the blood oxygen level-dependent (BOLD) response to brightness from the response to local border contrast and mean luminance, we used variants of White's brightness illusion, both opaque and transparent, in which luminance increments and decrements cancel each other out. The stimuli consisted of a target surface and a surround. The surround luminance was always sinusoidally modulated at 0.5 Hz to induce brightness modulation to the target. The target luminance was constant or modulated in counterphase to null brightness modulation. The mean signal changes were calculated from the voxels in V1, V2, and V3 corresponding to the retinotopic location of the target surface. The BOLD responses were significantly stronger for modulating brightness than for stimuli with constant brightness. In addition, the responses were stronger for transparent than for opaque stimuli, but there was more individual variation. No interaction between brightness and transparency was found. The results show that the early visual areas V1-V3 are sensitive to surface brightness and transparency and suggest that brightness and transparency are represented separately.

Evidence for the onset of color transparency in ρ0 electroproduction off nuclei

NASA Astrophysics Data System (ADS)

CLAS Collaboration; El Fassi, L.; Zana, L.; Hafidi, K.; Holtrop, M.; Mustapha, B.; Brooks, W. K.; Hakobyan, H.; Zheng, X.; Adhikari, K. P.; Adikaram, D.; Aghasyan, M.; Amaryan, M. J.; Anghinolfi, M.; Arrington, J.; Avakian, H.; Baghdasaryan, H.; Battaglieri, M.; Batourine, V.; Bedlinskiy, I.; Biselli, A. S.; Bookwalter, C.; Branford, D.; Briscoe, W. J.; Bültmann, S.; Burkert, V. D.; Carman, D. S.; Celentano, A.; Chandavar, S.; Cole, P. L.; Contalbrigo, M.; Crede, V.; D'Angelo, A.; Daniel, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Deur, A.; Dey, B.; Dickson, R.; Djalali, C.; Dodge, G. E.; Doughty, D.; Dupre, R.; Egiyan, H.; El Alaoui, A.; Elouadrhiri, L.; Eugenio, P.; Fedotov, G.; Fegan, S.; Gabrielyan, M. Y.; Garçon, M.; Gevorgyan, N.; Gilfoyle, G. P.; Giovanetti, K. L.; Girod, F. X.; Goetz, J. T.; Gohn, W.; Golovatch, E.; Gothe, R. W.; Griffioen, K. A.; Guidal, M.; Guo, L.; Hanretty, C.; Heddle, D.; Hicks, K.; Holt, R. J.; Hyde, C. E.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jawalkar, S. S.; Keller, D.; Khandaker, M.; Khetarpal, P.; Kim, A.; Kim, W.; Klein, A.; Klein, F. J.; Kubarovsky, V.; Kuhn, S. E.; Kuleshov, S. V.; Kuznetsov, V.; Laget, J. M.; Lu, H. Y.; MacGregor, I. J. D.; Mao, Y.; Markov, N.; Mayer, M.; McAndrew, J.; McKinnon, B.; Meyer, C. A.; Mineeva, T.; Mirazita, M.; Mokeev, V.; Moreno, B.; Moutarde, H.; Munevar, E.; Nadel-Turonski, P.; Ni, A.; Niccolai, S.; Niculescu, G.; Niculescu, I.; Osipenko, M.; Ostrovidov, A. I.; Pappalardo, L. L.; Paremuzyan, R.; Park, K.; Park, S.; Pasyuk, E.; Anefalos Pereira, S.; Phelps, E.; Pozdniakov, S.; Price, J. W.; Procureur, S.; Protopopescu, D.; Raue, B. A.; Reimer, P. E.; Ricco, G.; Rimal, D.; Ripani, M.; Ritchie, B. G.; Rosner, G.; Rossi, P.; Sabatié, F.; Saini, M. S.; Salgado, C.; Schott, D.; Schumacher, R. A.; Seraydaryan, H.; Sharabian, Y. G.; Smith, E. S.; Smith, G. D.; Sober, D. I.; Sokhan, D.; Stepanyan, S. S.; Stepanyan, S.; Stoler, P.; Strauch, S.; Taiuti, M.; Tang, W.; Taylor, C. E.; Tedeschi, D. J.; Tkachenko, S.; Ungaro, M.; Vernarsky, B.; Vineyard, M. F.; Voskanyan, H.; Voutier, E.; Watts, D.; Weinstein, L. B.; Weygand, D. P.; Wood, M. H.; Zachariou, N.; Zhao, B.; Zhao, Z. W.

2012-06-01

We have measured the nuclear transparency of the incoherent diffractive A(e,e‧ρ0) process in 12C and 56Fe targets relative to 2H using a 5 GeV electron beam. The nuclear transparency, the ratio of the produced ρ0's on a nucleus relative to deuterium, which is sensitive to ρA interaction, was studied as function of the coherence length (lc), a lifetime of the hadronic fluctuation of the virtual photon, and the four-momentum transfer squared (Q2). While the transparency for both 12C and 56Fe showed no lc dependence, a significant Q2 dependence was measured, which is consistent with calculations that included the color transparency effects.

Optically Transparent Wood from a Nanoporous Cellulosic Template: Combining Functional and Structural Performance.

PubMed

Li, Yuanyuan; Fu, Qiliang; Yu, Shun; Yan, Min; Berglund, Lars

2016-04-11

Optically transparent wood (TW) with transmittance as high as 85% and haze of 71% was obtained using a delignified nanoporous wood template. The template was prepared by removing the light-absorbing lignin component, creating nanoporosity in the wood cell wall. Transparent wood was prepared by successful impregnation of lumen and the nanoscale cellulose fiber network in the cell wall with refractive-index-matched prepolymerized methyl methacrylate (MMA). During the process, the hierarchical wood structure was preserved. Optical properties of TW are tunable by changing the cellulose volume fraction. The synergy between wood and PMMA was observed for mechanical properties. Lightweight and strong transparent wood is a potential candidate for lightweight low-cost, light-transmitting buildings and transparent solar cell windows.