Analysis and testing of a space crane articulating joint testbed

NASA Technical Reports Server (NTRS)

Sutter, Thomas R.; Wu, K. Chauncey

1992-01-01

The topics are presented in viewgraph form and include: space crane concept with mobile base; mechanical versus structural articulating joint; articulating joint test bed and reference truss; static and dynamic characterization completed for space crane reference truss configuration; improved linear actuators reduce articulating joint test bed backlash; 1-DOF space crane slew maneuver; boom 2 tip transient response finite element dynamic model; boom 2 tip transient response shear-corrected component modes torque driver profile; peak root member force vs. slew time torque driver profile; and open loop control of space crane motion.

29 CFR 1917.46 - Load indicating devices.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Except as provided in paragraph (a)(1)(viii) of this section, every crane after October 3, 1984 shall be... this by referencing a weight indication to crane ratings posted and visible to the operator, except... the supporting system (crane structure) that its failure could cause the load to be dropped, its...

29 CFR 1917.46 - Load indicating devices.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Except as provided in paragraph (a)(1)(viii) of this section, every crane after October 3, 1984 shall be... this by referencing a weight indication to crane ratings posted and visible to the operator, except... the supporting system (crane structure) that its failure could cause the load to be dropped, its...

Numerical assessment of wind turbine blade damage due to contact/impact with tower during installation

NASA Astrophysics Data System (ADS)

Shankar Verma, Amrit; Petter Vedvik, Nils; Gao, Zhen

2017-12-01

The use of floating crane vessel for installation of offshore wind turbine blades presents a great challenge in terms of its random motions and is likely to increase the probability of the blade hitting the preassembled tower during lifting operation. To evaluate the consequences of such scenarios and to determine the allowable motions or sea states for such operations, it is very important to understand the damage development in the blade due to impact. The present paper employs the application of high fidelity finite element method to investigate the damage behavior in the blade when the leading edge of the blade hits the tower. A nonlinear time domain structural analysis using ABAQUS was conducted on the DTU 10 MW reference blade model which is based on shell elements. Damage assessment along with the nature of evolution of various energies is examined and presented for two different impact velocities with modified layup stacking sequence at the contact region.

A statistical model of operational impacts on the framework of the bridge crane

NASA Astrophysics Data System (ADS)

Antsev, V. Yu; Tolokonnikov, A. S.; Gorynin, A. D.; Reutov, A. A.

2017-02-01

The technical regulations of the Customs Union demands implementation of the risk analysis of the bridge cranes operation at their design stage. The statistical model has been developed for performance of random calculations of risks, allowing us to model possible operational influences on the bridge crane metal structure in their various combination. The statistical model is practically actualized in the software product automated calculation of risks of failure occurrence of bridge cranes.

Cranes and Crops: Investigating Farmer Tolerances toward Crop Damage by Threatened Blue Cranes ( Anthropoides paradiseus) in the Western Cape, South Africa

NASA Astrophysics Data System (ADS)

van Velden, Julia L.; Smith, Tanya; Ryan, Peter G.

2016-12-01

The Western Cape population of Blue Cranes ( Anthropoides paradiseus) in South Africa is of great importance as the largest population throughout its range. However, Blue Cranes are strongly associated with agricultural lands in the Western Cape, and therefore may come into conflict with farmers who perceive them as damaging to crops. We investigated the viability of this population by exploring farmer attitudes toward crane damage in two regions of the Western Cape, the Swartland and Overberg, using semi-structured interviews. Perceptions of cranes differed widely between regions: farmers in the Swartland perceived crane flocks to be particularly damaging to the feed crop sweet lupin (65 % of farmers reported some level of damage by cranes), and 40 % of these farmers perceived cranes as more problematic than other common bird pests. Farmers in the Overberg did not perceive cranes as highly damaging, although there was concern about cranes eating feed at sheep troughs. Farmers who had experienced large flocks on their farms and farmers who ranked cranes as more problematic than other bird pests more often perceived cranes to be damaging to their livelihoods. Biographical variables and crop profiles could not be related to the perception of damage, indicating the complexity of this human-wildlife conflict. Farmers' need for management alternatives was related to the perceived severity of damage. These results highlight the need for location-specific management solutions to crop damage by cranes, and contribute to the management of this vulnerable species.

29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

Code of Federal Regulations, 2013 CFR

2013-07-01

... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

Code of Federal Regulations, 2014 CFR

2014-07-01

... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

Code of Federal Regulations, 2011 CFR

2011-07-01

... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

Code of Federal Regulations, 2010 CFR

2010-07-01

... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

Code of Federal Regulations, 2012 CFR

2012-07-01

... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

Cranes and Crops: Investigating Farmer Tolerances toward Crop Damage by Threatened Blue Cranes (Anthropoides paradiseus) in the Western Cape, South Africa.

PubMed

van Velden, Julia L; Smith, Tanya; Ryan, Peter G

2016-12-01

The Western Cape population of Blue Cranes (Anthropoides paradiseus) in South Africa is of great importance as the largest population throughout its range. However, Blue Cranes are strongly associated with agricultural lands in the Western Cape, and therefore may come into conflict with farmers who perceive them as damaging to crops. We investigated the viability of this population by exploring farmer attitudes toward crane damage in two regions of the Western Cape, the Swartland and Overberg, using semi-structured interviews. Perceptions of cranes differed widely between regions: farmers in the Swartland perceived crane flocks to be particularly damaging to the feed crop sweet lupin (65 % of farmers reported some level of damage by cranes), and 40 % of these farmers perceived cranes as more problematic than other common bird pests. Farmers in the Overberg did not perceive cranes as highly damaging, although there was concern about cranes eating feed at sheep troughs. Farmers who had experienced large flocks on their farms and farmers who ranked cranes as more problematic than other bird pests more often perceived cranes to be damaging to their livelihoods. Biographical variables and crop profiles could not be related to the perception of damage, indicating the complexity of this human-wildlife conflict. Farmers' need for management alternatives was related to the perceived severity of damage. These results highlight the need for location-specific management solutions to crop damage by cranes, and contribute to the management of this vulnerable species.

Effects of captivity and artificial breeding on microbiota in feces of the red-crowned crane (Grus japonensis)

PubMed Central

Xie, Yuwei; Xia, Pu; Wang, Hui; Yu, Hongxia; Giesy, John P.; Zhang, Yimin; Mora, Miguel A.; Zhang, Xiaowei

2016-01-01

Reintroduction of the threatened red-crowned crane has been unsuccessful. Although gut microbiota correlates with host health, there is little information on gut microbiota of cranes under different conservation strategies. The study examined effects of captivity, artificial breeding and life stage on gut microbiota of red-crown cranes. The gut microbiotas of wild, captive adolescent, captive adult, artificially bred adolescent and artificially bred adult cranes were characterized by next-generation sequencing of 16S rRNA gene amplicons. The gut microbiotas were dominated by three phyla: Firmicutes (62.9%), Proteobacteria (29.9%) and Fusobacteria (9.6%). Bacilli dominated the ‘core’ community consisting of 198 operational taxonomic units (OTUs). Both captivity and artificial breeding influenced the structures and diversities microbiota of the gut. Especially, wild cranes had distinct compositions of gut microbiota from captive and artificially bred cranes. The greatest alpha diversity was found in captive cranes, while wild cranes had the least. According to the results of ordination analysis, influences of captivity and artificial breeding were greater than that of life stage. Overall, captivity and artificial breeding influenced the gut microbiota, potentially due to changes in diet, vaccination, antibiotics and living conditions. Metagenomics can serve as a supplementary non-invasive screening tool for disease control. PMID:27628212

Effects of captivity and artificial breeding on microbiota in feces of the red-crowned crane (Grus japonensis).

PubMed

Xie, Yuwei; Xia, Pu; Wang, Hui; Yu, Hongxia; Giesy, John P; Zhang, Yimin; Mora, Miguel A; Zhang, Xiaowei

2016-09-15

Reintroduction of the threatened red-crowned crane has been unsuccessful. Although gut microbiota correlates with host health, there is little information on gut microbiota of cranes under different conservation strategies. The study examined effects of captivity, artificial breeding and life stage on gut microbiota of red-crown cranes. The gut microbiotas of wild, captive adolescent, captive adult, artificially bred adolescent and artificially bred adult cranes were characterized by next-generation sequencing of 16S rRNA gene amplicons. The gut microbiotas were dominated by three phyla: Firmicutes (62.9%), Proteobacteria (29.9%) and Fusobacteria (9.6%). Bacilli dominated the 'core' community consisting of 198 operational taxonomic units (OTUs). Both captivity and artificial breeding influenced the structures and diversities microbiota of the gut. Especially, wild cranes had distinct compositions of gut microbiota from captive and artificially bred cranes. The greatest alpha diversity was found in captive cranes, while wild cranes had the least. According to the results of ordination analysis, influences of captivity and artificial breeding were greater than that of life stage. Overall, captivity and artificial breeding influenced the gut microbiota, potentially due to changes in diet, vaccination, antibiotics and living conditions. Metagenomics can serve as a supplementary non-invasive screening tool for disease control.

18 CFR 1304.400 - Flotation devices and material, all floating structures.

Code of Federal Regulations, 2014 CFR

2014-04-01

... material, all floating structures. 1304.400 Section 1304.400 Conservation of Power and Water Resources... STRUCTURES AND OTHER ALTERATIONS Miscellaneous § 1304.400 Flotation devices and material, all floating structures. (a) All flotation for docks, boat mooring buoys, and other water-use structures and facilities...

18 CFR 1304.400 - Flotation devices and material, all floating structures.

Code of Federal Regulations, 2012 CFR

2012-04-01

... material, all floating structures. 1304.400 Section 1304.400 Conservation of Power and Water Resources... STRUCTURES AND OTHER ALTERATIONS Miscellaneous § 1304.400 Flotation devices and material, all floating structures. (a) All flotation for docks, boat mooring buoys, and other water-use structures and facilities...

18 CFR 1304.400 - Flotation devices and material, all floating structures.

Code of Federal Regulations, 2013 CFR

2013-04-01

... material, all floating structures. 1304.400 Section 1304.400 Conservation of Power and Water Resources... STRUCTURES AND OTHER ALTERATIONS Miscellaneous § 1304.400 Flotation devices and material, all floating structures. (a) All flotation for docks, boat mooring buoys, and other water-use structures and facilities...

Effects of floating gate structures on the two-dimensional electron gas density and electron mobility in AlGaN/AlN/GaN heterostructure field-effect transistors

NASA Astrophysics Data System (ADS)

Zhao, Jingtao; Zhao, Zhenguo; Chen, Zidong; Lin, Zhaojun; Xu, Fukai

2017-12-01

In this study, we have investigated the electrical properties of the AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) with floating gate structures using the measured capacitancevoltage (C-V) and current-voltage (I-V) characteristics. It is found that the two-dimensional electron gas (2DEG) density under the central gate cannot be changed by the floating gate structures. However, the floating gate structures can cause the strain variation in the barrier layer, which lead to the non-uniform distribution of the polarization charges, then induce a polarization Coulomb field and scatter the 2DEG. More floating gate structures and closer distance between the floating gates and the central gate will result in stronger scattering effect of the 2DEG.

The control system of synchronous movement of the gantry crane supports

NASA Astrophysics Data System (ADS)

Odnokopylov, I. G.; Gneushev, V. V.; Galtseva, O. V.; Natalinova, N. M.; Li, J.; Serebryakov, D. I.

2017-01-01

The paper presents study findings on synchronization of the gantry crane support movement. Asynchrony moving speed bearings may lead to an emergency mode at the natural rate of deformed metal structure alignment. The use of separate control of asynchronous motors with the vector control method allows synchronizing the movement speed of crane supports and achieving a balance between the motors. Simulation results of various control systems are described. Recommendations regarding the system further application are given.

Tetrameres (Tetrameres) grusi (Shumakovich, 1946) (Nematoda: Tetrameridae) in Eurasian cranes (Grus grus) in central Iran.

PubMed

Mowlavi, G R; Massoud, J; Mobedi, I; Gharagozlou, M J; Rezaian, M; Solaymani-Mohammadi, S

2006-04-01

The proventriculi of 11 Eurasian cranes (Grus grus) from central Iran were examined for the existence of parasitic helminths. Preliminary reports suggested that the death of these birds was related to untimely cold weather. Nine proventriculi (82%) were heavily infected by the nematode Tetrameres grusi. Glandular structure of the infected proventriculi was replaced by epithelial atrophy but significant inflammatory reactions were not observed in any of the infected organs. In serious infections, the nematode produced vast structural and functional changes, causing organ dysfunction and glandular necrosis. The coincidence of heavy helminth infection at times of environmental stress may lead to debilitation, wasting, and perhaps mortality in migratory cranes.

Load reduction test method of similarity theory and BP neural networks of large cranes

NASA Astrophysics Data System (ADS)

Yang, Ruigang; Duan, Zhibin; Lu, Yi; Wang, Lei; Xu, Gening

2016-01-01

Static load tests are an important means of supervising and detecting a crane's lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes.

A Methodology for the Evaluation of Alternative Offshore Container Discharge Systems.

DTIC Science & Technology

1982-04-01

effects of sea induced motions . These in- clude the use of larger capacity cranes to withstand the extra loads , structural modifications or add-on...relative motion between ships at sea. (39,40) Solutions include: a) Accelerometers mounted in the load block, crane boom tip, and on the deck of the...between the vertical motion of the crane boom and the load has the char- I acteristics of a high pass filter. That is, low frequency excursions of

Safe, Advanced, Adaptable Isolation System Eliminates the Need for Critical Lifts

NASA Technical Reports Server (NTRS)

Ginn, Starr

2011-01-01

The Starr Soft Support isolation system incorporates an automatically reconfigurable aircraft jack into NASA's existing 1-Hertz isolators. This enables an aircraft to float in mid-air without the need for a critical lift during ground vibration testing (GVT), significantly reducing testing risk, time, and costs. Currently incorporating the most advanced technology available, the 60,000-poundcapacity (27-metric-ton) isolation system is used for weight and measurement tests, control-surface free-play tests, and structural mode interaction tests without the need for any major reconfiguration, often saving days of time and significantly reducing labor costs. The Starr Soft Support isolation system consists of an aircraft-jacking device with three jacking points, each of which has an individual motor and accommodates up to 20,000 pounds (9 metric tons) for a total 60,000-pound (27-metric-ton) capacity. The system can be transported to the aircraft by forklift and placed at its jacking points using a pallet jack. The motors power the electric actuators, raising the aircraft above the ground until the landing gear can retract. Inflatable isolators then deploy, enabling the aircraft to float in mid-air, simulating a 1-Hertz free-free boundary condition. Inflatable isolators have been in use at NASA for years, enabling aircraft to literally float unsupported for highly accurate GVT. These isolators must be placed underneath the aircraft for this to occur. Traditionally, this is achieved by a critical lift a high-risk procedure in which a crane and flexible cord system are used to lift the aircraft. In contrast, the Starr Soft Support isolation system eliminates the need for critical lift by integrating the inflatable isolators into an aircraft jacking system. The system maintains vertical and horizontal isolating capabilities. The aircraft can be rolled onto the system, jacked up, and then the isolators can be inflated and positioned without any personnel needing to work underneath the aircraft. Also, the system accommodates changes in aircraft configuration, automatically adapting to changes in mass, and it can adjust the height of the isolators in one basic setup. Dryden personnel used the Starr Soft Support system to successfully perform a GVT on an F-15 being structurally modified by Gulfstream, Dryden's Gulfstream III used for science research and the crew exploration module and adaptor cone assembly.

Inverse dynamics of adaptive structures used as space cranes

NASA Technical Reports Server (NTRS)

Das, S. K.; Utku, S.; Wada, B. K.

1990-01-01

As a precursor to the real-time control of fast moving adaptive structures used as space cranes, a formulation is given for the flexibility induced motion relative to the nominal motion (i.e., the motion that assumes no flexibility) and for obtaining the open loop time varying driving forces. An algorithm is proposed for the computation of the relative motion and driving forces. The governing equations are given in matrix form with explicit functional dependencies. A simulator is developed to implement the algorithm on a digital computer. In the formulations, the distributed mass of the crane is lumped by two schemes, vz., 'trapezoidal' lumping and 'Simpson's rule' lumping. The effects of the mass lumping schemes are shown by simulator runs.

Modeling sandhill crane population dynamics

USGS Publications Warehouse

Johnson, D.H.

1979-01-01

The impact of sport hunting on the Central Flyway population of sandhill cranes (Grus canadensis) has been a subject of controversy for several years. A recent study (Buller 1979) presented new and important information on sandhill crane population dynamics. The present report is intended to incorporate that and other information into a mathematical model for the purpose of assessing the long-range impact of hunting on the population of sandhill cranes.The model is a simple deterministic system that embodies density-dependent rates of survival and recruitment. The model employs four kinds of data: (1) spring population size of sandhill cranes, estimated from aerial surveys to be between 250,000 and 400,000 birds; (2) age composition in fall, estimated for 1974-76 to be 11.3% young; (3) annual harvest of cranes, estimated from a variety of sources to be about 5 to 7% of the spring population; and (4) age composition of harvested cranes, which was difficult to estimate but suggests that immatures were 2 to 4 times as vulnerable to hunting as adults.Because the true nature of sandhill crane population dynamics remains so poorly understood, it was necessary to try numerous (768 in all) combinations of survival and recruitment functions, and focus on the relatively few (37) that yielded population sizes and age structures comparable to those extant in the real population. Hunting was then applied to those simulated populations. In all combinations, hunting resulted in a lower asymptotic crane population, the decline ranging from 5 to 54%. The median decline was 22%, which suggests that a hunted sandhill crane population might be about three-fourths as large as it would be if left unhunted. Results apply to the aggregate of the three subspecies in the Central Flyway; individual subspecies or populations could be affected to a greater or lesser degree.

29 CFR 1926.1400 - Scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... loaders. This machinery is also excluded when used with chains, slings or other rigging to lift suspended... that deliver material to a construction site when the crane is used to transfer building supply sheet goods or building supply packaged materials from the truck crane onto a structure, using a fork/cradle...

KSC-2014-3884

NASA Image and Video Library

2014-09-14

SAN DIEGO, Calif. – The Orion boilerplate test vehicle floats in the Pacific Ocean during Underway Recovery Test 4A. Orion was lowered into the water with a stationary crane from the USS Salvor, a safeguard-class rescue and salvage ship. Nearby, U.S. Navy personnel in a Zodiac boat and rigid hull inflatable boat prepare to practice procedures to tether and retrieve the test vehicle. NASA, Lockheed Martin and the U.S. Navy are conducting crane recovery tests to prepare for recovery of the Orion crew module on its return from a deep space mission. The underway recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, new hardware and personnel in open waters. The Ground Systems Development and Operations Program is conducting the underway recovery test. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in December 2014 atop a United Launch Alliance Delta IV Heavy rocket and in 2018 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: Kim Shiflett

KSC-2014-3882

NASA Image and Video Library

2014-09-14

SAN DIEGO, Calif. – The Orion boilerplate test vehicle floats in the Pacific Ocean during Underway Recovery Test 4A. Orion was lowered into the water with a stationary crane from the USS Salvor, a safeguard-class rescue and salvage ship. Nearby, U.S. Navy personnel in a Zodiac boat prepare to practice procedures to tether and retrieve the test vehicle. NASA, Lockheed Martin and the U.S. Navy are conducting crane recovery tests to prepare for recovery of the Orion crew module on its return from a deep space mission. The underway recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, new hardware and personnel in open waters. The Ground Systems Development and Operations Program is conducting the underway recovery test. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in December 2014 atop a United Launch Alliance Delta IV Heavy rocket and in 2018 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: Kim Shiflett

KSC-2014-3885

NASA Image and Video Library

2014-09-14

SAN DIEGO, Calif. – The Orion boilerplate test vehicle floats in the Pacific Ocean during Underway Recovery Test 4A. Orion was lowered into the water with a stationary crane from the USS Salvor, a safeguard-class rescue and salvage ship. Nearby, U.S. Navy personnel in a Zodiac boat have attached a flotation collar and tether lines to Orion to bring the test vehicle closer to the ship. NASA, Lockheed Martin and the U.S. Navy are conducting crane recovery tests to prepare for recovery of the Orion crew module on its return from a deep space mission. The underway recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, new hardware and personnel in open waters. The Ground Systems Development and Operations Program is conducting the underway recovery test. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in December 2014 atop a United Launch Alliance Delta IV Heavy rocket and in 2018 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: Kim Shiflett

KSC-2014-3920

NASA Image and Video Library

2014-09-14

SAN DIEGO, Calif. – The Orion boilerplate test vehicle floats in the Pacific Ocean during Underway Recovery Test 4A. Orion was lowered into the water with a stationary crane from the USS Salvor, a safeguard-class rescue and salvage ship. Nearby, Navy divers in two Zodiac boats practice recovery procedures. An orange stabilization collar has been attached around Orion to prepare for lift by stationary crane back onto the USS Salvor. NASA, Lockheed Martin and the U.S. Navy are conducting the test to prepare for recovery of the Orion crew module on its return from a deep space mission. The underway recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, new hardware and personnel in open waters. The Ground Systems Development and Operations Program is conducting the underway recovery test. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in December 2014 atop a United Launch Alliance Delta IV Heavy rocket and in 2018 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Kim Shiflett

Large ORU/ Crane evaluations conducted during first EVA of STS-87 (DTO 671)

NASA Image and Video Library

1997-11-25

STS087-718-073 (19 November ? 5 December 1997) --- On the Space Shuttle Columbia's first ever spacewalk (EVA), astronaut Winston E. Scott works with a simulated battery and 156-pound crane carried onboard for the first time this trip of Columbia. The crane's inclusion and the work with it are part of a continuing preparation effort for future work on the International Space Station (ISS). The ongoing project allows for evaluation of tools and operating methods to be applied to the construction of the ISS. This crane device is designed to aid future spacewalkers in transporting Orbital Replacement Units (ORU), with a mass up to 600 pounds (like the simulated battery pictured here), from translating carts on the exterior of ISS to various worksites on the truss structure. Earlier, astronauts Takao Doi (at the base of the crane, out of frame at right), an international mission specialist representing Japan, and Winston E. Scott had installed the crane in a socket along the middle port side of Columbia's cargo bay for the evaluation. The two began the crane operations, long ago manifest for this mission, after completing a contingency spacewalk to snag the free-flying Spartan 201 and berth it in the payload bay (visible in the background).

Population genetic structure in migratory sandhill cranes and the role of Pleistocene glaciations.

PubMed

Jones, Kenneth L; Krapu, Gary L; Brandt, David A; Ashley, Mary V

2005-08-01

Previous studies of migratory sandhill cranes (Grus canadensis) have made significant progress explaining evolution of this group at the species scale, but have been unsuccessful in explaining the geographically partitioned variation in morphology seen on the population scale. The objectives of this study were to assess the population structure and gene flow patterns among migratory sandhill cranes using microsatellite DNA genotypes and mitochondrial DNA haplotypes of a large sample of individuals across three populations. In particular, we were interested in evaluating the roles of Pleistocene glaciation events and postglaciation gene flow in shaping the present-day population structure. Our results indicate substantial gene flow across regions of the Midcontinental population that are geographically adjacent, suggesting that gene flow for most of the region follows an isolation-by-distance model. Male-mediated gene flow and strong female philopatry may explain the differing patterns of nuclear and mitochondrial variation. Taken in context with precise geographical information on breeding locations, the morphologic and microsatellite DNA variation shows a gradation from the Arctic-nesting subspecies G. c. canadensis to the nonArctic subspecies G. c. tabida. Analogous to other Arctic-nesting birds, it is probable that the population structure seen in Midcontinental sandhill cranes reflects the result of postglacial secondary contact. Our data suggest that subspecies of migratory sandhills experience significant gene flow and therefore do not represent distinct and independent genetic entities.

Opportunistically collected data reveal habitat selection by migrating Whooping Cranes in the U.S. Northern Plains

USGS Publications Warehouse

Niemuth, Neil D.; Ryba, Adam J.; Pearse, Aaron T.; Kvas, Susan M.; Brandt, David; Wangler, Brian; Austin, Jane; Carlisle, Martha J.

2018-01-01

The Whooping Crane (Grus americana) is a federally endangered species in the United States and Canada that relies on wetland, grassland, and cropland habitat during its long migration between wintering grounds in coastal Texas, USA, and breeding sites in Alberta and Northwest Territories, Canada. We combined opportunistic Whooping Crane sightings with landscape data to identify correlates of Whooping Crane occurrence along the migration corridor in North Dakota and South Dakota, USA. Whooping Cranes selected landscapes characterized by diverse wetland communities and upland foraging opportunities. Model performance substantially improved when variables related to detection were included, emphasizing the importance of accounting for biases associated with detection and reporting of birds in opportunistic datasets. We created a predictive map showing relative probability of occurrence across the study region by applying our model to GIS data layers; validation using independent, unbiased locations from birds equipped with platform transmitting terminals indicated that our final model adequately predicted habitat use by migrant Whooping Cranes. The probability map demonstrated that existing conservation efforts have protected much top-tier Whooping Crane habitat, especially in the portions of North Dakota and South Dakota that lie east of the Missouri River. Our results can support species recovery by informing prioritization for acquisition and restoration of landscapes that provide safe roosting and foraging habitats. Our results can also guide the siting of structures such as wind towers and electrical transmission and distribution lines, which pose a strike and mortality risk to migrating Whooping Cranes.

Safety assessment of Cracked K-joint Structure Based on Fracture Mechanics

NASA Astrophysics Data System (ADS)

Wang, Xin; Pengyu, Yan; Jianwei, Du; Fuhai, Cai

2017-05-01

The K-joint is the main bearing structure of lattice jib crane. During frequent operation of the crane, surface cracks often occur at its weld toe, and then continue to expand until failure. The safety of the weak structure K-joint of the crane jib can be evaluated by BS7910 failure assessment standard in order to improve its utilization. The finite element model of K-joint structure with cracks is established, and its mechanical properties is analyzed by ABAQUS software, the results show that the crack depth has a great influence on the bearing capacity of the structure compared with the crack length. It is assumed that the K-joint with the semi-elliptical surface crack under the action of the tension propagate stably under the condition that the c/a (ratio of short axis to long axis of ellipse) is about 0.3. The safety assessment of K-joint with different lengths crack is presented according to the 2A failure assessment diagram of BS7910, and the critical crack of K-joint under different loads can be obtained.

Onboard photo: Astronauts at work

NASA Technical Reports Server (NTRS)

1997-01-01

Onboard Space Shuttle Columbia's (STS-87) first ever Extravehicular Activity (EVA), astronaut Takao Doi works with a 156-pound crane carried onboard for the first time. The crane's inclusion and the work with it are part of a continuing preparation effort for future work on the International Space Station (ISS). The ongoing project allows for evaluation of tools and operating methods to be applied to the construction of the Space Station. This crane device is designed to aid future space walkers in transporting Orbital Replacement Units (ORU), with a mass up to 600 pounds (like the simulated battery pictured here), from translating carts on the exterior of ISS to various worksites on the truss structure. Earlier Doi, an international mission specialist representing Japan, and astronaut Winston E. Scott, mission specialist, had installed the crane in a socket along the middle port side of Columbia's cargo bay for the evaluation. The two began the crane operations after completing a contingency EVA to snag the free-flying Spartan 201 and berth it in the payload bay (visible in the background).

Space Shuttle Project

NASA Image and Video Library

1997-11-19

Onboard Space Shuttle Columbia's (STS-87) first ever Extravehicular Activity (EVA), astronaut Takao Doi works with a 156-pound crane carried onboard for the first time. The crane's inclusion and the work with it are part of a continuing preparation effort for future work on the International Space Station (ISS). The ongoing project allows for evaluation of tools and operating methods to be applied to the construction of the Space Station. This crane device is designed to aid future space walkers in transporting Orbital Replacement Units (ORU), with a mass up to 600 pounds (like the simulated battery pictured here), from translating carts on the exterior of ISS to various worksites on the truss structure. Earlier Doi, an international mission specialist representing Japan, and astronaut Winston E. Scott, mission specialist, had installed the crane in a socket along the middle port side of Columbia's cargo bay for the evaluation. The two began the crane operations after completing a contingency EVA to snag the free-flying Spartan 201 and berth it in the payload bay (visible in the background).

Large ORU/ Crane evaluations conducted during first EVA of STS-87 (DTO 671)

NASA Image and Video Library

1997-11-25

STS087-718-069 (19 November ? 5 December 1997) --- On the Space Shuttle Columbia's first ever spacewalk (EVA), astronaut Takao Doi works with a 156-pound crane carried onboard for the first time this trip of Columbia. The crane's inclusion and the work with it are part of a continuing preparation effort for future work on the International Space Station (ISS). The ongoing project allows for evaluation of tools and operating methods to be applied to the construction of the Space Station. This crane device is designed to aid future spacewalkers in transporting Orbital Replacement Units (ORU), with a mass up to 600 pounds (like the simulated battery pictured here), from translating carts on the exterior of ISS to various worksites on the truss structure. Earlier Doi, an international mission specialist representing Japan, and astronaut Winston E. Scott had installed the crane in a socket along the middle port side of Columbia's cargo bay for the evaluation. The two began the crane operations, long ago manifest for this mission, after completing a contingency spacewalk to snag the free-flying Spartan 201 and berth it in the payload bay (visible in the background).

View northnorthwest of turret shed (building 56), at right of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View north-northwest of turret shed (building 56), at right of photograph. Electrical and electronics facility (building 1000) located south of drydock no. 2. The gantry crane and its supporting structure (left foreground) was used to load assembled gun turrets onto barges moored in the barge basin under the gantry structure. After loading on a crane on pier 4 and lifted into positioned on a battleship or cruiser. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Drydock No. 2, League Island, Philadelphia, Philadelphia County, PA

Stress Analysis for the Critical Metal Structure of Bridge Crane

NASA Astrophysics Data System (ADS)

Ling, Zhangwei; Wang, Min; Xia, Junfang; Wang, Songhua; Guo, Xiaolian

2018-01-01

Based on the type of connection between the main girder and end beam of electrical single beam crane, the finite element analysis model of a full portal crane was established. The stress distribution of the critical structure under different loading conditions was analyzed. The results shown that the maximum Mises stress and deflection of the main girder were within the allowable range. And the connecting location between end beam web and main girder had higher stress than other region, especially at the lower edge and upper edge of the end beam web and the area near the bolt hole of upper wing panel. Therefore it is important to inspect the connection status, the stress condition and the crack situation nearing connection location during the regular inspection process to ensure the safety of the connection between the main girder and end beam.

Structurally adaptive space crane concept for assembling space systems on orbit

NASA Technical Reports Server (NTRS)

Dorsey, John T.; Sutter, Thomas R.; Wu, K. Chauncey

1992-01-01

Many future human space exploration missions will probably require large vehicles that must be assembled on orbit. Thus, a device that can move, position, and assemble large and massive spacecraft components on orbit becomes essential for these missions. A concept is described for such a device: a space crane concept that uses erectable truss hardware to achieve high-stiffness and low-mass booms and uses articulating truss joints that can be assembled on orbit. The hardware has been tested and shown to have linear load-deflection response and to be structurally predictable. The hardware also permits the crane to be reconfigured into different geometries to satisfy future assembly requirements. A number of articulating and rotary joint concepts have been sized and analyzed, and the results are discussed. Two strategies were proposed to suppress motion-induced vibration: placing viscous dampers in selected truss struts and preshaping motion commands. Preliminary analyses indicate that these techniques have the potential to greatly enhance structural damping.

Structure and Fabrication of a Microscale Flow-Rate/Skin Friction Sensor

NASA Technical Reports Server (NTRS)

Chandrasekharan, Vijay (Inventor); Sells, Jeremy (Inventor); Sheplak, Mark (Inventor); Arnold, David P. (Inventor)

2014-01-01

A floating element shear sensor and method for fabricating the same are provided. According to an embodiment, a microelectromechanical systems (MEMS)-based capacitive floating element shear stress sensor is provided that can achieve time-resolved turbulence measurement. In one embodiment, a differential capacitive transduction scheme is used for shear stress measurement. The floating element structure for the differential capacitive transduction scheme incorporates inter digitated comb fingers forming differential capacitors, which provide electrical output proportional to the floating element deflection.

Performing a Large-Scale Modal Test on the B2 Stand Crane at NASA's Stennis Space Center

NASA Technical Reports Server (NTRS)

Stasiunas, Eric C.; Parks, Russel A.; Sontag, Brendan D.

2018-01-01

A modal test of NASA's Space Launch System (SLS) Core Stage is scheduled to occur at the Stennis Space Center B2 test stand. A derrick crane with a 150-ft long boom, located at the top of the stand, will be used to suspend the Core Stage in order to achieve defined boundary conditions. During this suspended modal test, it is expected that dynamic coupling will occur between the crane and the Core Stage. Therefore, a separate modal test was performed on the B2 crane itself, in order to evaluate the varying dynamic characteristics and correlate math models of the crane. Performing a modal test on such a massive structure was challenging and required creative test setup and procedures, including implementing both AC and DC accelerometers, and performing both classical hammer and operational modal analysis. This paper describes the logistics required to perform this large-scale test, as well as details of the test setup, the modal test methods used, and an overview and application of the results.

Performing a Large-Scale Modal Test on the B2 Stand Crane at NASA's Stennis Space Center

NASA Technical Reports Server (NTRS)

Stasiunas, Eric C.; Parks, Russel A.

2018-01-01

A modal test of NASA’s Space Launch System (SLS) Core Stage is scheduled to occur prior to propulsion system verification testing at the Stennis Space Center B2 test stand. A derrick crane with a 180-ft long boom, located at the top of the stand, will be used to suspend the Core Stage in order to achieve defined boundary conditions. During this suspended modal test, it is expected that dynamic coupling will occur between the crane and the Core Stage. Therefore, a separate modal test was performed on the B2 crane itself, in order to evaluate the varying dynamic characteristics and correlate math models of the crane. Performing a modal test on such a massive structure was challenging and required creative test setup and procedures, including implementing both AC and DC accelerometers, and performing both classical hammer and operational modal analysis. This paper describes the logistics required to perform this large-scale test, as well as details of the test setup, the modal test methods used, and an overview of the results.

KSC-2014-3883

NASA Image and Video Library

2014-09-14

SAN DIEGO, Calif. – The Orion boilerplate test vehicle floats in the Pacific Ocean during Underway Recovery Test 4A. Orion was lowered into the water with a stationary crane from the USS Salvor, a safeguard-class rescue and salvage ship. Nearby, U.S. Navy personnel in a Zodiac boat, left, and a rigid hull inflatable boat practice procedures to tether and retrieve the test vehicle. U.S. Navy divers are standing on the flotation collar that has been placed around the test vehicle. NASA, Lockheed Martin and the U.S. Navy are conducting crane recovery tests to prepare for recovery of the Orion crew module on its return from a deep space mission. The underway recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, new hardware and personnel in open waters. The Ground Systems Development and Operations Program is conducting the underway recovery test. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in December 2014 atop a United Launch Alliance Delta IV Heavy rocket and in 2018 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: Kim Shiflett

Personnel occupied woven envelope robot

NASA Technical Reports Server (NTRS)

Wessling, F. C.

1986-01-01

The use of nonmetallic or fabric structures for space application is considered. The following structures are suggested: (1) unpressurized space hangars; (2) extendable tunnels for soft docking; and (3) manned habitat for space stations, storage facilities, and work structures. The uses of the tunnel as a passageway: for personnel and equipment, eliminating extravehicular activity, for access to a control cabin on a space crane and between free flyers and the space station are outlined. The personnal occupied woven envelope robot (POWER) device is shown. The woven envelope (tunnel) acts as part of the boom of a crane. Potential applications of POWER are outlined. Several possible deflection mechanisms and design criteria are determined.

Detecting imperceptible movements in structures by means of video magnification

NASA Astrophysics Data System (ADS)

Ordóñez, Celestino; Cabo, Carlos; García-Cortés, Silverio; Menéndez, Agustín.

2017-06-01

The naked eye is not able to perceive very slow movements such as those occurring in certain structures under external forces. This might be the case of metallic or concrete bridges, tower cranes or steel beams. However, sometimes it is of interest to view such movements, since they can provide useful information regarding the mechanical state of those structures. In this work, we analyze the utility of video magnification to detect imperceptible movements in several types of structures. First, laboratory experiments were conducted to validate the method. Then, two different tests were carried out on real structures: one on a water slide and another on a tower crane. The results obtained allow us to conclude that image cross-correlation and video magnification is indeed a promising low-cost technique for structure health monitoring.

Wind Turbine Controller to Mitigate Structural Loads on a Floating Wind Turbine Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fleming, Paul A.; Peiffer, Antoine; Schlipf, David

This paper summarizes the control design work that was performed to optimize the controller of a wind turbine on the WindFloat structure. The WindFloat is a semi-submersible floating platform designed to be a support structure for a multi-megawatt power-generating wind turbine. A controller developed for a bottom-fixed wind turbine configuration was modified for use when the turbine is mounted on the WindFloat platform. This results in an efficient platform heel resonance mitigation scheme. In addition several control modules, designed with a coupled linear model, were added to the fixed-bottom baseline controller. The approach was tested in a fully coupled nonlinearmore » aero-hydroelastic simulation tool in which wind and wave disturbances were modeled. This testing yielded significant improvements in platform global performance and tower-base-bending loading.« less

State Recognition and Visualization of Hoisting Motor of Quayside Container Crane Based on SOFM

NASA Astrophysics Data System (ADS)

Yang, Z. Q.; He, P.; Tang, G.; Hu, X.

2017-07-01

The neural network structure and algorithm of self-organizing feature map (SOFM) are researched and analysed. The method is applied to state recognition and visualization of the quayside container crane hoisting motor. By using SOFM, the clustering and visualization of attribute reduction of data are carried out, and three kinds motor states are obtained with Root Mean Square(RMS), Impulse Index and Margin Index, and the simulation visualization interface is realized by MATLAB. Through the processing of the sample data, it can realize the accurate identification of the motor state, thus provide better monitoring of the quayside container crane hoisting motor and a new way for the mechanical state recognition.

33 CFR 147.815 - ExxonMobil Hoover Floating OCS Facility safety zone.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false ExxonMobil Hoover Floating OCS... Floating OCS Facility safety zone. (a) Description. The ExxonMobil Hoover Floating OCS Facility, Alaminos... (1640.4 feet) from each point on the structure's outer edge is a safety zone. (b) Regulation. No vessel...

A case study of middle size floating airports for shallower and deeper waters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoshida, Koichiro; Suzuki, Hideyuki; Nishigaki, Makoto

1996-12-31

Demands for large and middle size airports are expanding in Japan with continuous increase of air transportation. However these demands will not be satisfied without effective ocean space utilization. Most of the wide and shallower waters suitable for reclamation have already been reclaimed. Furthermore those shallower waters are generally close to the residential area, and noise and environmental problems will be caused if they were used for airports. Deeper waters, which are relatively distant from the shore, are suitable for airport but reclamation of these waters are extremely difficult. This paper presents a structural planning of an open sea typemore » middle size floating airport to promote local economy and also improve transportation infrastructure of isolated islands. The airports of this plan are a semisubmersible type floating structure with a relatively thin deck, a number of slender columns and large size lower hulls. The floating structure is moored by inclined tension legs to restrain the motion. The diameter of the leg becomes much larger compared with the legs of existing tension leg platforms. Parameters related to the configuration of the floating structure and the mooring system are determined by comparing analyses results with the proper design criteria. Several kinds of static and dynamic computer programs are used in the planning. The proposed structural plan and the mooring system are considered as a typical floating airport appropriate for the open sea.« less

18 CFR 1304.400 - Flotation devices and material, all floating structures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Flotation devices and material, all floating structures. 1304.400 Section 1304.400 Conservation of Power and Water Resources... structures. (a) All flotation for docks, boat mooring buoys, and other water-use structures and facilities...

18 CFR 1304.400 - Flotation devices and material, all floating structures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Flotation devices and material, all floating structures. 1304.400 Section 1304.400 Conservation of Power and Water Resources... structures. (a) All flotation for docks, boat mooring buoys, and other water-use structures and facilities...

Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing.

PubMed

Li, Qijun; Guan, Xiaoying; Cui, Mengsuo; Zhu, Zhihong; Chen, Kai; Wen, Haoyang; Jia, Danyang; Hou, Jian; Xu, Wenting; Yang, Xinggang; Pan, Weisan

2018-01-15

Three dimensional (3D) extrusion-based printing is a paste-based rapid prototyping process, which is capable of building complex 3D structures. The aim of this study was to explore the feasibility of 3D extrusion-based printing as a pharmaceutical manufacture technique for the fabrication of gastro-floating tablets. Novel low-density lattice internal structure gastro-floating tablets of dipyridamole were developed to prolong the gastric residence time in order to improve drug release rate and consequently, improve bioavailability and therapeutic efficacy. Excipients commonly employed in the pharmaceutical study could be efficiently applied in the room temperature 3D extrusion-based printing process. The tablets were designed with three kinds of infill percentage and prepared by hydroxypropyl methylcellulose (HPMC K4M) and hydroxypropyl methylcellulose (HPMC E15) as hydrophilic matrices and microcrystalline cellulose (MCC PH101) as extrusion molding agent. In vitro evaluation of the 3D printed gastro-floating tablets was performed by determining mechanical properties, content uniformity, and weight variation. Furthermore, re-floating ability, floating duration time, and drug release behavior were also evaluated. Dissolution profiles revealed the relationship between infill percentage and drug release behavior. The results of this study revealed the potential of 3D extrusion-based printing to fabricate gastro-floating tablets with more than 8h floating process with traditional pharmaceutical excipients and lattice internal structure design. Copyright © 2017. Published by Elsevier B.V.

The response of pile-guided floats subjected to dynamic loading.

DOT National Transportation Integrated Search

2014-08-01

Pile-Guided floats can be a desirable alternative to stationary berthing structures. Both floats and guide piles are subjected to dynamic : forces such as wind generated waves and impacts from vessels. This project developed a rational basis for esti...

46 CFR 108.601 - Crane design.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST... Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed in accordance with the American Petroleum Institute Specification for Offshore Cranes, API Spec. 2C, Second...

46 CFR 108.601 - Crane design.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST... Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed in accordance with the American Petroleum Institute Specification for Offshore Cranes, API Spec. 2C, Second...

Host–parasite behavioral interactions in a recently introduced, whooping crane population

USGS Publications Warehouse

King, Richard S.; McKann, Patrick C.; Gray, Brian R.; Putnam, Michael S.

2015-01-01

The whooping crane Grus americana has a long conservation history, but despite multiple attempts across North America, introduction success is lacking. Recently introduced, captively reared whooping cranes have had periods of poor reproductive performance in central Wisconsin that sometimes coincided with black fly (Diptera: Simuliidae) emergences. Sandhill crane Grus canadensis reproductive performance in central Wisconsin is approximately double that of whooping cranes. We used comfort behaviors as a measure of black fly harassment to infer whether behavioral differences existed between nesting sandhill cranes and nesting whooping cranes and between successful and unsuccessful whooping crane pairs. To further explore the interaction between black flies and incubating whooping cranes, we examined differences in behaviors between incubating birds and their off-nest mates. Compared to their off-nest mates, incubating whooping cranes exhibited elevated comfort behaviors, suggesting a bird at a nest may experience greater harassment from black flies. Sandhill cranes had elevated head-flicks over whooping cranes. Whooping cranes exhibited more head-rubs than sandhill cranes, and successful whooping crane pairs had elevated head-rubs over pairs that deserted their nests. Behavioral differences between sandhill cranes and whooping cranes as well as differences in reproductive performance, could be explained by exposure to local breeding conditions. Whereas sandhill cranes have nested in the area for hundreds, if not thousands, of years, whooping cranes were only recently introduced to the area. Behavioral differences between the species as well as those between successful and unsuccessful whooping crane pairs could also be explained by the effect of captive exposure, which could affect all whooping crane introductions.

Active structural control of a floating wind turbine with a stroke-limited hybrid mass damper

NASA Astrophysics Data System (ADS)

Hu, Yaqi; He, Erming

2017-12-01

Floating wind turbines are subjected to more severe structural loads than fixed-bottom wind turbines due to additional degrees of freedom (DOFs) of their floating foundations. It's a promising way of using active structural control method to improve the structural responses of floating wind turbines. This paper investigates an active vibration control strategy for a barge-type floating wind turbine by setting a stroke-limited hybrid mass damper (HMD) in the turbine's nacelle. Firstly, a contact nonlinear modeling method for the floating wind turbine with clearance between the HMD and the stroke limiters is presented based on Euler-Lagrange's equations and an active control model of the whole system is established. The structural parameters are validated for the active control model and an equivalent load coefficient method is presented for identifying the wind and wave disturbances. Then, a state-feedback linear quadratic regulator (LQR) controller is designed to reduce vibration and loads of the wind turbine, and two optimization methods are combined to optimize the weighting coefficients when considering the stroke of the HMD and the active control power consumption as constraints. Finally, the designed controllers are implemented in high fidelity simulations under five typical wind and wave conditions. The results show that active HMD control strategy is shown to be achievable and the designed controllers could further reduce more vibration and loads of the wind turbine under the constraints of stroke limitation and power consumption. "V"-shaped distribution of the TMD suppression effect is inconsistent with the Weibull distribution in practical offshore floating wind farms, and the active HMD control could overcome this shortcoming of the passive TMD.

Maintenance of working capacity of movement mechanism of load trolley with linear traction electric drive of bridge type crane.

NASA Astrophysics Data System (ADS)

Goncharov, K. A.; Denisov, I. A.

2017-10-01

The article considers the influence of the air gap size between the linear motor elements on the stability of the traction drive of the movement mechanism of the trolley of the bridge type crane. The main factors affecting the air gap size and the causes of their occurrence are described. The technique of calculating the magnitude of air gap variation is described in relation to the general deformation of the crane metal structure. Recommendations on the need for installation of additional equipment for load trolleys of various designs are given. The optimal values of the length of the trolley base are proposed. Observance of these values ensures normal operation of the traction drive.

Quantifying Thin Mat Floating Marsh Strength and Interaction with Hydrodynamic Conditions

NASA Astrophysics Data System (ADS)

Collins, J. H., III; Sasser, C.; Willson, C. S.

2016-12-01

Louisiana possesses over 350,000 acres of unique floating vegetated systems known as floating marshes or flotants. Floating marshes make up 70% of the Terrebonne and Barataria basin wetlands and exist in several forms, mainly thick mat or thin mat. Salt-water intrusion, nutria grazing, and high-energy wave events are believed to be some contributing factors to the degradation of floating marshes; however, there has been little investigation into the hydrodynamic effects on their structural integrity. Due to their unique nature, floating marshes could be susceptible to changes in the hydrodynamic environment that may result from proposed river freshwater and sediment diversion projects introducing flow to areas that are typically somewhat isolated. This study aims to improve the understanding of how thin mat floating marshes respond to increased hydrodynamic stresses and, more specifically, how higher water velocities might increase the washout probability of this vegetation type. There are two major components of this research: 1) A thorough measurement of the material properties of the vegetative mats as a root-soil matrix composite material; and 2) An accurate numerical simulation of the hydrodynamics and forces imposed on the floating marsh mats by the flow. To achieve these goals, laboratory and field experiments were conducted using a customized device to measure the bulk properties of typical floating marshes. Additionally, Delft-3D FLOW and ANSYS FLUENT were used to simulate the flow around a series of simplified mat structures in order to estimate the hydrodynamic forcings on the mats. The hydrodynamic forcings are coupled with a material analysis, allowing for a thorough analysis of their interaction under various conditions. The 2-way Fluid Structure Interaction (F.S.I.) between the flow and the mat is achieved by coupling a Finite Element Analysis (F.E.A.) solver in ANSYS with FLUENT. The flow conditions necessary for the structural failure of the floating marshes are determined for a multitude of mat shapes and sizes, leading to a quantifiable critical velocity required for washout. Ultimately, through dimensional analysis, an equation for washout potential will be developed from the results, which could be used as a design guideline.

Development of Multi-Layered Floating Floor for Cabin Noise Reduction

NASA Astrophysics Data System (ADS)

Song, Jee-Hun; Hong, Suk-Yoon; Kwon, Hyun-Wung

2017-12-01

Recently, regulations pertaining to the noise and vibration environment of ship cabins have been strengthened. In this paper, a numerical model is developed for multi-layered floating floor to predict the structure-borne noise in ship cabins. The theoretical model consists of multi-panel structures lined with high-density mineral wool. The predicted results for structure-borne noise when multi-layered floating floor is used are compared to the measure-ments made of a mock-up. A comparison of the predicted results and the experimental one shows that the developed model could be an effective tool for predicting structure-borne noise in ship cabins.

Haemosporida prevalence and diversity are similar in endangered wild whooping cranes (Grus americana) and sympatric sandhill cranes (Grus canadensis).

PubMed

Bertram, Miranda R; Hamer, Gabriel L; Hartup, Barry K; Snowden, Karen F; Medeiros, Matthew C; Hamer, Sarah A

2017-04-01

The population growth of endangered whooping cranes (Grus americana) is not consistent with species recovery goals, and the impact of parasite infection on whooping crane populations is largely unknown. Disease ecology and epidemiology research of endangered species is often hindered by limited ability to conduct invasive sampling on the target taxa. Accordingly, we hypothesized that sandhill cranes (Grus canadensis) would be a useful surrogate species to investigate the health impacts of Haemosporida infection in whooping cranes. Our goal was to compare the prevalence and diversity of Haemosporida infection between whooping cranes and sandhill cranes. We detected an overall infection prevalence of 83·6% (n = 61) in whooping cranes and 59·6% (n = 47) and 63·6 (n = 22) in two sympatric sandhill crane populations captured in Texas. Prevalence was significantly lower in allopatric sandhill cranes captured in New Mexico (12·1%, n = 33). Haemoproteus antigonis was the most abundant haemoparasite in cranes, present in 57·4% of whooping cranes and 39·2% of sandhill cranes; Plasmodium and Leucocytozoon were present at significantly lower levels. The high prevalence of Haemosporida in whooping cranes and sympatric sandhill cranes, with shared parasite lineages between the two species, supports sandhill cranes as a surrogate species for understanding health threats to endangered whooping cranes.

Allozyme evidence for crane systematics and polymorphisms within populations of Sandhill, Sarus, Siberian and Whooping Cranes

USGS Publications Warehouse

Dessauer, H.C.; Gee, G.F.; Rogers, J.S.

1992-01-01

Electrophoretic analysis of proteins yielded evidence on the relationships of species of cranes and on genetic diversity within populations of some species. Diversity within the Greater Sandhill crane and a Florida population of the Florida Sandhill crane was similar to that of most other vertebrates, but diversity was low in the Mississippi Sandhill crane, in the Okefenokee population of the Florida Sandhill crane, and within the Siberian and Sarus cranes. Diversity was surprisingly high among whooping cranes, whose number dropped to less than 25 early in this century. Phylogenetic analysis, using both character state and distance algorithms, yielded highly concordant trees for the 15 species. The African crowned cranes (Balearica) were widely divergent from all other cranes. Species of Anthropoides, Bugeranus, and Grus clustered closely but sorted into two lineages: a Whooper Group consisted of the whooping, common, hooded, black-necked, white-naped, and red-crowned cranes of genus Grus; and a Sandhill Group included the Sandhill, Siberian, Sarus, and Brolga cranes of genus Grus, the wattled crane of genus Bugeranus, and the Demoiselle and blue cranes of genus Anthropoides.

Book review: Sandhill and whooping cranes: Ancient voices over America's wetlands

USGS Publications Warehouse

Austin, Jane E.

2011-01-01

Paul Johnsgard has long been captivated by wild cranes and their unique vocalizations, courtship dances, and wide-ranging migrations. As a scientist and an admirer, Johnsgard has watched their migrations and behaviors for decades as hundreds of thousands of cranes staged each spring by the central Platte River, not far from his home in Lincoln, Nebraska. As an artist, he has skilfully captured their courtship dances and other behaviours in his exceptional line drawings. And, as an author, he has written extensively on their ecology in three earlier books: Cranes of the World (1983), Those of the Gray Wind: the Sandhill Crane (1986), and Crane Music: a Natural History of Cranes (1991). Much has happened relative to North American cranes in the 20 years since Johnsgard published Crane Music, including increased crane abundance in many areas and the completion of multiple studies on crane ecology and conservation. This new crane book serves as an update to Crane Music and provides the reader with many useful resources for observing and learning about cranes.

The response of pile-guided floats subjected to dynamic loading : volume I final report.

DOT National Transportation Integrated Search

2014-08-01

Pile : - : Guided floats can be a desirable alternative to stationary berthing structures. Both floats and guide piles are subjected to dynamic : forces such as wind generated waves and impacts from vessels. This project developed a rational basis fo...

The response of pile-guided floats subjected to dynamic loading : volume II annex.

DOT National Transportation Integrated Search

2014-08-01

Pile-Guided floats can be a desirable alternative to stationary berthing structures. Both floats and guide piles are subjected to dynamic : forces such as wind generated waves and impacts from vessels. This project developed a rational basis for esti...

Pathogenicity of West Nile virus and response to vaccination in sandhill cranes (Grus canadensis) using a killed vaccine.

PubMed

Olsen, Glenn H; Miller, Kimberli J; Docherty, Douglas E; Bochsler, Valerie S; Sileo, Louis

2009-06-01

West Nile virus was introduced into the United States in the vicinity of New York, New York, USA in 1999. The virus has since killed large numbers of birds nationwide, especially, but not limited to, crows (Corvus brachyrhinchos). One sandhill crane (Grus canadensis) at the Bridgeport Zoo (Bridgeport, Connecticut, USA) reportedly died from West Nile virus, so sandhill cranes and endangered whooping cranes (Grus americana), both in the wild and in captive breeding colonies at United States Geological Service (USGS) Patuxent Wildlife Research Center (Laurel, Maryland, USA) were considered at risk. A killed vaccine in sandhill cranes was evaluated by vaccinating and then challenging these cranes with live West Nile virus. No sandhill cranes inoculated with the killed vaccine developed significant titers when compared with unvaccinated controls. No sandhill cranes inoculated with the vaccine and challenged with the virus died from West Nile virus infection. In addition, no unvaccinated challenged sandhill cranes died. However, 2 days postchallenge, vaccinated cranes had significantly less viremia (P < 0.05) than unvaccinated cranes. Seven days postchallenge vaccinated cranes had significantly less cloacal shedding of the virus (P < 0.05) than unvaccinated cranes and significantly less weight loss (P < 0.05) as compared with unvaccinated cranes. Vaccinated sandhill cranes developed significantly higher titers 14 days postchallenge and were viremic for shorter periods of time after challenge than unvaccinated individuals. Unvaccinated challenged cranes had glial cell aggregates in both the brain and brain stem areas, and this was not observed in vaccinated challenged cranes or in vaccinated unchallenged cranes.

Pathogenicity of West Nile virus and response to vaccination in sandhill cranes (Grus canadensis) using a killed vaccine

USGS Publications Warehouse

Olsen, Glenn H.; Miller, Kimberli J.; Docherty, Douglas E.; Shearn-Bochsler, Valerie I.; Sileo, Louis

2009-01-01

West Nile virus was introduced into the United States in the vicinity of New York, New York, USA in 1999. The virus has since killed large numbers of birds nationwide, especially, but not limited to, crows (Corvus brachyrhinchos). One sandhill crane (Grus canadensis) at the Bridgeport Zoo (Bridgeport, Connecticut, USA) reportedly died from West Nile virus, so sandhill cranes and endangered whooping cranes (Grus americana), both in the wild and in captive breeding colonies at United States Geological Service (USGS) Patuxent Wildlife Research Center (Laurel, Maryland, USA) were considered at risk. A killed vaccine in sandhill cranes was evaluated by vaccinating and then challenging these cranes with live West Nile virus. No sandhill cranes inoculated with the killed vaccine developed significant titers when compared with unvaccinated controls. No sandhill cranes inoculated with the vaccine and challenged with the virus died from West Nile virus infection. In addition, no unvaccinated challenged sandhill cranes died. However, 2 days postchallenge, vaccinated cranes had significantly less viremia (P < 0.05) than unvaccinated cranes. Seven days postchallenge vaccinated cranes had significantly less cloacal shedding of the virus (P < 0.05) than unvaccinated cranes and significantly less weight loss (P < 0.05) as compared with unvaccinated cranes. Vaccinated sandhill cranes developed significantly higher titers 14 days postchallenge and were viremic for shorter periods of time after challenge than unvaccinated individuals. Unvaccinated challenged cranes had glial cell aggregates in both the brain and brain stem areas, and this was not observed in vaccinated challenged cranes or in vaccinated unchallenged cranes.

46 CFR 108.601 - Crane design.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed in accordance with the American Petroleum...

46 CFR 108.601 - Crane design.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed in accordance with the American Petroleum...

14 CFR 25.529 - Hull and main float landing conditions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float landing conditions. 25... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.529 Hull and main.... (b) Unsymmetrical landing for hull and single float seaplanes. Unsymmetrical step, bow, and stern...

13. TOP OF STATIC TEST TOWER VIEW OF STEEL TRUSS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. TOP OF STATIC TEST TOWER VIEW OF STEEL TRUSS STRUCTURE AND OVERHEAD CRANE. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

Study on design method and vibration reduction characteristic of floating raft with periodic structure

NASA Astrophysics Data System (ADS)

Fang, Yuanyuan; Zuo, Yanyan; Xia, Zhaowang

2018-03-01

The noise level is getting higher with the development of high-power marine power plant. Mechanical noise is one of the most obvious noise sources which not only affect equipment reliability, riding comfort and working environment, but also enlarge underwater noise. The periodic truss type device which is commonly applied in fields of aerospace and architectural is introduced to floating raft construction in ship. Four different raft frame structure are designed in the paper. The vibration transmissibility is taken as an evaluation index to measure vibration isolation effect. A design scheme with the best vibration isolation effect is found by numerical method. Plate type and the optimized periodic truss type raft frame structure are processed to experimental verify vibration isolation effect of the structure of the periodic raft. The experimental results demonstrate that the same quality of the periodic truss floating raft has better isolation effect than that of the plate type floating raft.

Design of a Versatile, Teleoperable, Towable Lifting Machine with Robotic Capabilities for Use in Nasa's Lunar Base Operations

NASA Technical Reports Server (NTRS)

Harris, Elizabeth; Ogle, James; Schoppe, Dean

1989-01-01

The lifting machine will assist in lifting cargo off of landers sent to the Moon and in the construction of a lunar base. Three possible designs were considered for the overall configuration of the lifting machine: the variable angle crane, the tower crane, and the gantry crane. Alternate designs were developed for the major components of the lifting machine. A teleoperable, variable angle crane was chosen as its final design. The design consists of a telescoping boom mounted to a chassis that is supported by two conical wheels for towing and four outriggers for stability. Attached to the end of the boom is a seven degree of freedom robot arm for light, dexterous, lifting operations. A cable and hook suspends from the end of the boom for heavy, gross, lifting operations. Approximate structural sizes were determined for the lifter and its components. However, further analysis is needed to determine the optimum design dimensions. The design team also constructed a model of the design which demonstrates its features and operating principals.

14 CFR 25.531 - Hull and main float takeoff condition.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float takeoff condition. 25... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.531 Hull and main float takeoff condition. For the wing and its attachment to the hull or main float— (a) The aerodynamic...

A crane moves toward the S0 truss to transfer it to a workstand in the O&C Bldg.

NASA Technical Reports Server (NTRS)

1999-01-01

Inside the Operations and Checkout Bldg. (O&C), an overhead crane is centered over the S0 truss segment before lowering. The crane will move it to a workstand in the O&C where it will undergo processing. In the foreground is the protective cover just removed. During the processing, the Canadian Mobile Transporter, power distribution system modules, a heat pipe radiator for cooling, computers, and a pair of rate gyroscopes will be installed. Four Global Positioning System antennas are already installed. A 44- by 15-foot structure weighing 30,800 pounds when fully outfitted and ready for launch, the truss will be at the center of the ISS 10-truss, girderlike structure that will ultimately extend the length of a football field. Eventually the S0 truss will be attached to the U.S. Lab, 'Destiny,' which is scheduled to be added to the ISS in April 2000. Later, other trusses will be attached to the S0 on-orbit. The S0 truss is scheduled to be launched in the first quarter of 2001 on mission STS-108.

Coccidia of whooping cranes

USGS Publications Warehouse

Forrester, Donald J.; Carpenter, J.W.; Blankinship, D.R.

1978-01-01

Coccidial oocysts were observed in 6 of 19 fecal samples from free-ranging whooping cranes (Grus americana) and 4 of 16 samples from captive whooping cranes. Eimeria gruis occurred in four free-ranging whooping cranes and E. reichenowi in two free-ranging and two captive whooping cranes. Fecal samples from two captive cranes contained oocysts of Isospora lacazei which was considered a spurious parasite. Oocysts of both species of Eimeria were prevalent in fecal samples collected from three free-ranging Canadian sandhill cranes (G. canadensis rowani) from whooping crane wintering grounds in Texas. These coccidia were prevalent also in fecal samples from 14 sandhill cranes (of 4 subspecies) maintained in captivity at the Patuxent Wildlife Research Center in Maryland.

Population sizes and group characteristics of Siberian Crane (Leucogeranus leucogeranus) and Hooded Crane (Grus monacha) in Poyang Lake Wetland

PubMed Central

SHAO, Ming-Qin; GUO, Hong; JIANG, Jian-Hong

2014-01-01

Both the Siberian Crane (Leucogeranus leucogeranus) and Hooded Crane (Grus monacha) have limited population sizes and are considered endangered by domestic Chinese and international agencies. To document the current size of their respective populations and characterize their groups, between October 2012 and April 2013 we undertook fieldwork at four nature reserve areas within the Poyang Lake wetlands. We divided Poyanghu National Nature Reserve (PYH) into the Wucheng (PWC) and Hengfeng areas (PHF), because each are each located in different counties. Our fieldwork showed that the Siberian Crane occurred mainly in PYH (364 in the PHF, 158 in the PWC) and the Nanjishan Wetland National Nature Reserve (NJS, with 200 individuals). The Hooded Crane was mainly distributed in PYH (302 in the PHF and 154 in the PWC). Family groups accounted for more than 50% of the total number of groups among both species, with Hooded Cranes forming more family groups than Siberian Cranes. Typically, these groups were formed of two adults with one offspring (Siberian Crane), and two adults with two offspring (Hooded Crane), with the mean family group size of the Siberian Crane and Hooded Crane being respectively 2.65±0.53 (n=43) and 3.09±0.86 (n=47) individuals per group. The mean collective group size of the Siberian Crane and Hooded Crane included 28.09±24.94 (n=23) and 28.94±27.97 (n=16) individuals per group, respectively, with the proportion of juveniles among Hooded Cranes being more than double that seen among the Siberian Cranes. PMID:25297076

Use of a helicopter to capture flighted cranes

USGS Publications Warehouse

Ellis, D.H.; Hjertaas, D.; Johns, B.W.; Urbanek, R.P.

1998-01-01

Using a helicopter, we pursued 12 sandhill cranes (Grus canadensis) and captured 6. In forested habitat, cranes could be forced down, but we were unable to deploy the pursuit team, so cranes could not be captured. In open habitat, every crane we pursued was captured. Target cranes were forced to the ground in 0.3-14 minutes. Adjusting pursuit distance (50-150 m) was essential in promoting fatigue and in preventing escape of target cranes.

Isolation and identification of trichothecenes from Fusarium compactum suspected in the aetiology of a major intoxication of sandhill cranes.

USGS Publications Warehouse

Cole, Richard J.; Dorner, Joe W.; Gilbert, John; Mortimer, David N.; Crews, Colin; Mitchell, J.C.; Windingstad, Ronald M.; Nelson, Paul E.; Cutler, Horace G.

1988-01-01

Isoneosolaniol (4,8-diacetoxy-12,13-epoxytrichothec-9-ene-3,15-diol) and other unidentified trichothecene mycotoxins were isolated from culture extracts of two highly toxigenic strains of Fusarium compactum cultured from waste peanuts involved in an acute intoxication of sandhill cranes (Grus canadensis). Neosolaniol and other unidentified trichothecenes were detected in waste peanuts collected from affected areas. The structure of isoneosolaniol was determined by 1H and 13C NMR analyses and by high-resolution mass spectometry. Isoneosolaniol was hightly toxic to 1-day-old chickens and to a HEp2 cell culture assay. It was concluded that the most logical cause of the sandhill crane intoxication was Fusarium spp. Contaminated peanuts and various trichothecene mycotoxins acting alone or in conjunction with other Fusarium mycotoxins.

A Historical Analysis of Crane Mishaps at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Wolfe, Crystal

2014-01-01

Cranes and hoists are widely used in many areas. Crane accidents and handling mishaps are responsible for injuries, costly equipment damage, and program delays. Most crane accidents are caused by preventable factors. Understanding these factors is critical when designing cranes and preparing lift plans. Analysis of previous accidents provides insight into current recommendations for crane safety. Cranes and hoists are used throughout Kennedy Space Center to lift everything from machine components to critical flight hardware. Unless they are trained crane operators, most NASA employees and contractors do not need to undergo specialized crane training and may not understand the safety issues surrounding the use of cranes and hoists. A single accident with a crane or hoist can injure or kill people, cause severe equipment damage, and delay or terminate a program. Handling mishaps can also have a significant impact on the program. Simple mistakes like bouncing or jarring a load, or moving the crane down when it should go up, can damage fragile flight hardware and cause major delays in processing. Hazardous commodities (high pressure gas, hypergolic propellants, and solid rocket motors) can cause life safety concerns for the workers performing the lifting operations. Most crane accidents are preventable with the correct training and understanding of potential hazards. Designing the crane with human factors taken into account can prevent many accidents. Engineers are also responsible for preparing lift plans where understanding the safety issues can prevent or mitigate potential accidents. Cranes are widely used across many areas of KSC. Failure of these cranes often leads to injury, high damage costs, and significant delays in program objectives. Following a basic set of principles and procedures during design, fabrication, testing, regular use, and maintenance can significantly minimize many of these failures. As the accident analysis shows, load drops are often caused or influenced by human factors. Therefore, proper training and understanding of crane safety throughout the workforce is critical. It is important that the engineers designing the cranes, lift planners preparing the lift plans, operators performing the lifts, and training officers conducting the operator training all understand the problems that can happen with cranes and how to ensure the safety of the workforce and equipment being lifted.

Contamination Status of Seven Elements in Hooded Cranes Wintering in South-West Kyushu, Japan: Comparison with Red-Crowned Cranes in Hokkaido, Japan.

PubMed

Teraoka, Hiroki; Miyagi, Hasumi; Haraguchi, Yuko; Takase, Kozo; Kitazawa, Takio; Noda, Jun

2018-05-31

The hooded crane is designated as an endangered species. The cranes breed primarily in wetlands in southeast Russia and China in summer. Most of the hooded crane population winters in the Izumi plain in Japan. It is difficult to know the contamination status of their habitat because of their vast breeding area. We determined the levels of Cd, Pb, As, (total) Hg, Se, Zn, and Cu in the liver, kidney, and muscle of hooded cranes that were found dead in Izumi in the periods 2003-2006 and 2014-2015 compared with the levels in red-crowned cranes in Hokkaido, Japan, as the only cranes in which these elements had been studied extensively. There were no notable differences between levels of the seven elements in the two periods. Overall, tissue levels of the elements examined in hooded cranes were comparable to those in red-crowned cranes except for Hg and Se. Tissue levels of Hg and Se were clearly lower in hooded cranes than in red-crowned cranes that were found dead from 2000. One lead poisoning case was confirmed. The results suggest that Hooded cranes wintering in Izumi are not extensively contaminated with the seven elements examined.

Micromechanisms with floating pivot

DOEpatents

Garcia, Ernest J.

2001-03-06

A new class of tilting micromechanical mechanisms have been developed. These new mechanisms use floating pivot structures to relieve some of the problems encountered in the use of solid flexible pivots.

Development and Evaluation of a Quantitative PCR Assay Targeting Sandhill Crane (Grus canadensis) Fecal Pollution

PubMed Central

Ryu, Hodon; Lu, Jingrang; Vogel, Jason; Elk, Michael; Chávez-Ramírez, Felipe; Ashbolt, Nicholas

2012-01-01

While the microbial water quality in the Platte River is seasonally impacted by excreta from migrating cranes, there are no methods available to study crane fecal contamination. Here we characterized microbial populations in crane feces using phylogenetic analysis of 16S rRNA gene fecal clone libraries. Using these sequences, a novel crane quantitative PCR (Crane1) assay was developed, and its applicability as a microbial source tracking (MST) assay was evaluated by determining its host specificity and detection ability in environmental waters. Bacteria from crane excreta were dominated by bacilli and proteobacteria, with a notable paucity of sequences homologous to Bacteroidetes and Clostridia. The Crane1 marker targeted a dominant clade of unclassified Lactobacillales sequences closely related to Catellicoccus marimammalium. The host distribution of the Crane1 marker was relatively high, being positive for 69% (66/96) of the crane excreta samples tested. The assay also showed high host specificity, with 95% of the nontarget fecal samples (i.e., n = 553; 20 different free-range hosts) being negative. Of the presumed crane-impacted water samples (n = 16), 88% were positive for the Crane1 assay, whereas none of the water samples not impacted by cranes were positive (n = 165). Bayesian statistical models of the Crane1 MST marker demonstrated high confidence in detecting true-positive signals and a low probability of false-negative signals from environmental water samples. Altogether, these data suggest that the newly developed marker could be used in environmental monitoring studies to study crane fecal pollution dynamics. PMID:22492437

Issues in offshore platform research - Part 1: Semi-submersibles

NASA Astrophysics Data System (ADS)

Sharma, R.; Kim, Tae-Wan; Sha, O. P.; Misra, S. C.

2010-09-01

Availability of economic and efficient energy resources is crucial to a nation's development. Because of their low cost and advancement in drilling and exploration technologies, oil and gas based energy systems are the most widely used energy source throughout the world. The inexpensive oil and gas based energy systems are used for everything, i.e., from transportation of goods and people to the harvesting of crops for food. As the energy demand continues to rise, there is strong need for inexpensive energy solutions. An offshore platform is a large structure that is used to house workers and machinery needed to drill wells in the ocean bed, extract oil and/or natural gas, process the produced fluids, and ship or pipe them to shore. Depending on the circumstances, the offshore platform can be fixed (to the ocean floor) or can consist of an artificial island or can float. Semi-submersibles are used for various purposes in offshore and marine engineering, e.g. crane vessels, drilling vessels, tourist vessels, production platforms and accommodation facilities, etc. The challenges of deepwater drilling have further motivated the researchers to design optimum choices for semi-submersibles for a chosen operating depth. In our series of eight papers, we discuss the design and production aspects of all the types of offshore platforms. In the present part I, we present an introduction and critical analysis of semi-submersibles.

Releases of whooping cranes to the Florida nonmigratory flock: a structured decision-making approach: report to the International Whooping Crane Recovery Team, September 22, 2008

USGS Publications Warehouse

Moore, Clinton T.; Converse, Sarah J.; Folk, Martin J.; Boughton, Robin; Brooks, Bill; French, John B.; O'Meara, Timothy; Putnam, Michael; Rodgers, James; Spalding, Marilyn

2008-01-01

We used a structured decision-making approach to inform the decision of whether the Florida Fish and Wildlife Conservation Commission should request of the International Whooping Crane Recovery Team that additional whooping crane chicks be released into the Florida Non-Migratory Population (FNMP). Structured decision-making is an application of decision science that strives to produce transparent, replicable, and defensible decisions that recognize the appropriate roles of management policy and science in decision-making. We present a multi-objective decision framework, where management objectives include successful establishment of a whooping crane population in Florida, minimization of costs, positive public relations, information gain, and providing a supply of captive-reared birds to alternative crane release projects, such as the Eastern Migratory Population. We developed models to predict the outcome relative to each of these objectives under 29 different scenarios of the release methodology used from 1993 to 2004, including options of no further releases and variable numbers of releases per year over the next 5-30 years. In particular, we developed a detailed set of population projection models, which make substantially different predictions about the probability of successful establishment of the FNMP. We used expert elicitation to develop prior model weights (measures of confidence in population model predictions); the results of the population model weighting and modelaveraging exercise indicated that the probability of successful establishment of the FNMP ranged from 9% if no additional releases are made, to as high as 41% with additional releases. We also used expert elicitation to develop weights (relative values) on the set of identified objectives, and we then used a formal optimization technique for identifying the optimal decision, which considers the tradeoffs between objectives. The optimal decision was identified as release of 3 cohorts (24 birds) per year over the next 10 years. However, any decision that involved release of 1-3 cohorts (8-24 birds) per year over the next 5 to 20 years, as well as decisions that involve skipping releases in every other year, performed better in our analysis than the alternative of no further releases. These results were driven by the relatively high objective weights that experts placed on the population objective (i.e., successful establishment of the FNMP) and the information gain objective (where releases are expected to accelerate learning on what was identified as a primary uncertainty: the demographic performance of wild-hatched birds). Additional considerations that were not formally integrated into the analysis are also discussed.

Characterization of gizzards and grits of wild cranes found dead at Izumi Plain in Japan

PubMed Central

UEGOMORI, Mima; HARAGUCHI, Yuko; OBI, Takeshi; TAKASE, Kozo

2018-01-01

We analyzed the gizzards, and grits retained in the gizzards of 41 cranes that migrated to the Izumi Plain during the winter of 2015/2016 and died there, either due to accident or disease. These included 31 Hooded Cranes (Grus monacha) and 10 White-naped Cranes (G. vipio). We determined body weight, gizzard weight, total grit weight and number per gizzard, and size, shape, and surface roundness of the grits. Average gizzard weights were 92.4 g for Hooded Cranes and 97.1 g for White-naped Cranes, and gizzard weight positively correlated with body weight in both species. Average total grit weights per gizzard were 19.7 g in Hooded Cranes and 25.7 g in White-naped Cranes, and were significantly higher in the latter. Average percentages of body weight to grit weight were 0.8% in Hooded Cranes and 0.5% in White-naped Cranes. Average grit number per gizzard was 693.5 in Hooded Cranes and 924.2 in White-naped Cranes, and were significantly higher in the latter. The average grit size was 2.8 mm in both species. No differences were found in the shape and surface roundness of grits between the two species. To the best of our knowledge, this is the first study on the grits retained in the gizzards of Hooded and White-naped Cranes. PMID:29503349

Characterization of gizzards and grits of wild cranes found dead at Izumi Plain in Japan.

PubMed

Uegomori, Mima; Haraguchi, Yuko; Obi, Takeshi; Takase, Kozo

2018-04-18

We analyzed the gizzards, and grits retained in the gizzards of 41 cranes that migrated to the Izumi Plain during the winter of 2015/2016 and died there, either due to accident or disease. These included 31 Hooded Cranes (Grus monacha) and 10 White-naped Cranes (G. vipio). We determined body weight, gizzard weight, total grit weight and number per gizzard, and size, shape, and surface roundness of the grits. Average gizzard weights were 92.4 g for Hooded Cranes and 97.1 g for White-naped Cranes, and gizzard weight positively correlated with body weight in both species. Average total grit weights per gizzard were 19.7 g in Hooded Cranes and 25.7 g in White-naped Cranes, and were significantly higher in the latter. Average percentages of body weight to grit weight were 0.8% in Hooded Cranes and 0.5% in White-naped Cranes. Average grit number per gizzard was 693.5 in Hooded Cranes and 924.2 in White-naped Cranes, and were significantly higher in the latter. The average grit size was 2.8 mm in both species. No differences were found in the shape and surface roundness of grits between the two species. To the best of our knowledge, this is the first study on the grits retained in the gizzards of Hooded and White-naped Cranes.

Evaluation of the enteric microflora of captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis).

PubMed

Hoar, Bryanne M; Whiteside, Douglas P; Ward, Linda; Douglas Inglis, G; Morck, Douglas W

2007-03-01

The enteric flora of captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis) has not been well described, despite its potential importance in the understanding of both the normal condition of the intestinal physiology of these animals and the altered colonization within disease states in these birds. Nineteen whooping cranes and 23 sandhill cranes housed currently at the Calgary Zoo or its affiliated Devonian Wildlife Conservation Centre (DWCC) in Calgary, Alberta were sampled from October 2004-February 2005 by collecting aerobic and anaerobic cloacal swabs from each bird. There were seven major groupings of bacteria isolated from both species of crane. Gram-positive cocci, coliforms, and gram-negative bacilli were the most prevalent types of bacteria isolated for both crane species, with Escherichia coli, Enterococcus faecalis, and Streptococcus Group D, not Enterococcus the bacterial species isolated most commonly. There was a significant difference in the average number of isolates per individual between the two crane species but no differences between age or gender categories within crane species. Campylobacter sp. were isolated from five whooping cranes. The potential zoonotic pathogen Campylobacter jejuni was isolated from one whooping crane and C. upsaliensis was isolated from a second. Three other isolates were unspeciated members of the Campylobacter genus and likely belong to a species undescribed previously. The evaluation of the enteric cloacal flora of whooping cranes and sandhill cranes illustrates that differences exist between these two closely related crane species, and highlights the potential implications these differences may have for current practices involving captive wildlife. Zoo Biol 0:1-13, 2007. (c) 2007 Wiley-Liss, Inc.

Dynamic response mitigation of floating wind turbine platforms using tuned liquid column dampers.

PubMed

Jaksic, V; Wright, C S; Murphy, J; Afeef, C; Ali, S F; Mandic, D P; Pakrashi, V

2015-02-28

In this paper, we experimentally study and compare the effects of three combinations of multiple tuned liquid column dampers (MTLCDs) on the dynamic performance of a model floating tension-leg platform (TLP) structure in a wave basin. The structural stability and safety of the floating structure during operation and maintenance is of concern for the performance of a renewable energy device that it might be supporting. The dynamic responses of the structure should thus be limited for these renewable energy devices to perform as intended. This issue is particularly important during the operation of a TLP in extreme weather conditions. Tuned liquid column dampers (TLCDs) can use the power of sloshing water to reduce surge motions of a floating TLP exposed to wind and waves. This paper demonstrates the potential of MTLCDs in reducing dynamic responses of a scaled TLP model through an experimental study. The potential of using output-only statistical markers for monitoring changes in structural conditions is also investigated through the application of a delay vector variance (DVV) marker for different conditions of control for the experiments. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Human Factors Engineering Guidelines for Overhead Cranes

NASA Technical Reports Server (NTRS)

Chandler, Faith; Delgado, H. (Technical Monitor)

2001-01-01

This guideline provides standards for overhead crane cabs that can be applied to the design and modification of crane cabs to reduce the potential for human error due to design. This guideline serves as an aid during the development of a specification for purchases of cranes or for an engineering support request for crane design modification. It aids human factors engineers in evaluating existing cranes during accident investigations or safety reviews.

Damage identification of a TLP floating wind turbine by meta-heuristic algorithms

NASA Astrophysics Data System (ADS)

Ettefagh, M. M.

2015-12-01

Damage identification of the offshore floating wind turbine by vibration/dynamic signals is one of the important and new research fields in the Structural Health Monitoring (SHM). In this paper a new damage identification method is proposed based on meta-heuristic algorithms using the dynamic response of the TLP (Tension-Leg Platform) floating wind turbine structure. The Genetic Algorithms (GA), Artificial Immune System (AIS), Particle Swarm Optimization (PSO), and Artificial Bee Colony (ABC) are chosen for minimizing the object function, defined properly for damage identification purpose. In addition to studying the capability of mentioned algorithms in correctly identifying the damage, the effect of the response type on the results of identification is studied. Also, the results of proposed damage identification are investigated with considering possible uncertainties of the structure. Finally, for evaluating the proposed method in real condition, a 1/100 scaled experimental setup of TLP Floating Wind Turbine (TLPFWT) is provided in a laboratory scale and the proposed damage identification method is applied to the scaled turbine.

Wintering Sandhill Crane exposure to wind energy development in the central and southern Great Plains, USA

USGS Publications Warehouse

Pearse, Aaron T.; Brandt, David; Krapu, Gary

2016-01-01

Numerous wind energy projects have been constructed in the central and southern Great Plains, USA, the main wintering area for midcontinental Sandhill Cranes (Grus canadensis). In an initial assessment of the potential risks of wind towers to cranes, we estimated spatial overlap, investigated potential avoidance behavior, and determined the habitat associations of cranes. We used data from cranes marked with platform transmitting terminals (PTTs) with and without global positioning system (GPS) capabilities. We estimated the wintering distributions of PTT-marked cranes prior to the construction of wind towers, which we compared with current tower locations. Based on this analysis, we found 7% spatial overlap between the distributions of cranes and towers. When we looked at individually marked cranes, we found that 52% would have occurred within 10 km of a tower at some point during winter. Using data from cranes marked after tower construction, we found a potential indication of avoidance behavior, whereby GPS-marked cranes generally used areas slightly more distant from existing wind towers than would be expected by chance. Results from a habitat selection model suggested that distances between crane locations and towers may have been driven more by habitat selection than by avoidance, as most wind towers were constructed in locations not often selected by wintering cranes. Our findings of modest regional overlap and that few towers have been placed in preferred crane habitat suggest that the current distribution of wind towers may be of low risk to the continued persistence of wintering midcontinental Sandhill Cranes in the central and southern Great Plains.

Finite Element Analysis of Doorframe Structure of Single Oblique Pole Type in Container Crane

NASA Astrophysics Data System (ADS)

Cheng, X. F.; Wu, F. Q.; Tang, G.; Hu, X.

2017-07-01

Compared with the composite type, the single oblique pole type has more advantages, such as simple structure, thrift steel and high safe overhead clearance. The finite element model of the single oblique pole type is established in nodes by ANSYS, and more details are considered when the model is simplified, such as the section of Girder and Boom, torque in Girder and Boom occurred by Machinery house and Trolley, density according to the way of simplification etc. The stress and deformation of ten observation points are compared and analyzed, when the trolley is in nine dangerous positions. Based on the result of analysis, six dangerous points are selected to provide reference for the detection and evaluation of container crane.

Scott and Doi conduct tool evaluations during second EVA of STS-87

NASA Image and Video Library

1997-12-03

STS087-341-036 (3 Dec. 1997) --- Backdropped against a dark Earth and a light blue horizon, astronaut Takao Doi (right), international mission specialist representing Japan's National Space Development Agency (NASDA), works with a crane while astronaut Winston E. Scott looks on. This second extravehicular activity (EVA) of the mission continued the evaluation of techniques and hardware to be used in constructing the International Space Station (ISS). Near Scott can be seen the representation of a small Orbital Replacement Unit (ORU) in the grasp of the 156-pound crane operated by Doi. A similar crane could be used to transport various sized ORU’s from translation carts on the exterior of the ISS to various worksites on the truss structure. This view was captured, on 35mm film, by a crew mate in the shirt sleeve environment of the Space Shuttle Columbia's cabin. The SPARTAN-201 satellite is in its stowed position at frame center.

77 FR 49722 - Cranes and Derricks in Construction: Demolition and Underground Construction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... cranes rule, OSHA prepared a final economic analysis (FEA) as required by the Occupational Safety and... construction work involving demolition. The FEA for the final cranes standard, which included all cranes, crane... were technologically and economically feasible. Because the FEA drew these conclusions from...

29 CFR 1926.1438 - Overhead & gantry cranes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 8 2011-07-01 2011-07-01 false Overhead & gantry cranes. 1926.1438 Section 1926.1438 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1438 Overhead & gantry cranes. (a) Permanently installed overhead and gantry cranes. The requirements of § 1910...

29 CFR 1926.1432 - Multiple-crane/derrick lifts-supplemental requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 8 2011-07-01 2011-07-01 false Multiple-crane/derrick lifts-supplemental requirements... Cranes and Derricks in Construction § 1926.1432 Multiple-crane/derrick lifts—supplemental requirements... implementation. (1) The multiple-crane/derrick lift must be directed by a person who meets the criteria for both...

Crane reproductive physiology and conservation

USGS Publications Warehouse

Gee, G.F.

1983-01-01

Some unique features of crane reproduction, management, and conservation are described. Because cranes are sexually monomorphic, sexing is difficult and must be accomplished using behavior, laparoscopy, cloacal examination, genetic techniques, or fecal steroid analysis. Although husbandry techniques for cranes are similar to those used with other nondomestic birds, a number of basic characteristics, such as extreme aggressiveness, imprinting by the crane chick on man, a delayed molt in the immature crane, delayed sexual maturity, and infertility, pose special problems for the propagator. Artificial insemination is a practical solution to crane infertility. Vigorous captive management and propagation efforts must become increasingly important if several endangered crane species are to survive the continuing decline in wild populations. The ultimate goal is the restoration of suitable habitat and sustainable native populations.

[Production of interspecies hybrid of cranes by artificial insemination with frozen semen].

PubMed

Maksudov, G Iu; Panchenko, V G

2002-01-01

Studies of artificial insemination of cranes and cryoconservation of their semen have been carried out in the nursery of rare species at the Oka Biosphere Reserve for many years. The criterion of successful cryoconservation of the semen is the obtaining of fertilized eggs after artificial insemination by the thawed semen. An experiment is described on artificial insemination of females of the white-naped crane Grus vipio by the frozen-thawed semen of the Siberian white crane G. leucogeranus after one-year storage of semen in liquid nitrogen. As a result, an interspecific hybrid of cranes was obtained, which confirmed the possibility of producing a bank of cryoconserved crane semen. The use of the white-naped crane females was due to the absence of conspecific males and unavailability of Siberian white crane females. Problems of artificial insemination and cryoconservation of semen of rare crane species are discussed.

Inclusion body disease of cranes: comparison of pathologic findings in cranes with acquired vs. experimentally induced disease

USGS Publications Warehouse

Schuh, J.C.; Sileo, L.; Siegfried, Lynne M.; Yuill, Thomas M.

1986-01-01

Inclusion body disease of cranes was the cause of death in 17 immature and mature cranes of 5 different species in Wisconsin. A herpesvirus of unknown origin was the apparent cause. An isolate of this herpesvirus was used to experimentally infect 3 species of cranes. Macroscopic and microscopic lesions associated with naturally acquired and experimentally induced disease were essentially identical. Multifocal hepatic and splenic necrosis was found in all cranes evaluated. Necrosis of the gastrointestinal tract, thymus, and bursa of Fabricius also was seen in some of the cranes. Eosinophilic intranuclear inclusion bodies often were commonly associated with hepatic lesions, sometimes with the splenic lesions, and rarely with the thymic or gastrointestinal tract lesions. The lesions of this inclusion body disease were similar to those reported for cranes in Austria from which a crane herpesvirus was isolated.

Testing a West Nile virus vaccine in sandhill cranes (Grus canadensis)

USGS Publications Warehouse

Olsen, Glenn H.; Miller, K.; Docherty, D.; Sileo, L.; Chavez-Ramirez, Felipe

2005-01-01

Eight sandhill cranes (Grus canadensis) were vaccinated with a commercial equine West Nile virus vaccine (Fort Dodge Animal Health, Fort Dodge, Iowa, USA) at the USGS Patuxent Wildlife Research Center, Laurel, Maryland, USA. Three doses of the vaccine were given, the first dose (day 0) was followed by a second 21 days later and the third dose 7 days after the second day 28 after the first dose). All doses were 0.50 ml. In addition, 5 sandhill cranes were given injections of similar amounts of sterile water on the same schedule. Blood for complete blood counts, serum chemistries, and serological testing was collected at weekly intervals. Ten weeks after the first injection of the vaccine and 6 weeks after the last of the 3 injections of the vaccine, the cranes were shipped to the USGS National Wildlife Heath Center, Madison, Wisconsin, USA. After a two-week adjustment period, 11 of these cranes were injected intramuscularly with one mosquito dose of West Nile virus. Two of the vaccinated cranes were not challenged and acted as uninfected controls. One week post challenge the only abnormal findings were slight weight loss (average 6% loss since the time of challenge with West Nile virus) and elevated white blood cell counts (heterophilic leukocytosis). There were no deaths and no clinically ill cranes (unvaccinated or vaccinated cranes) among the 11 challenged birds. All cranes were euthanized 6 weeks post challenge, and necropsies were performed. Pre-challenge titers showed no titer response to the vaccinations. However, when challenged, vaccinated cranes developed titers more quickly (within 7-10 days), and were viremic and shed virus via the cloaca for a shorter period of time than the unvaccinated cranes (2-7 days for vaccinated cranes versus 2-10 days for unvaccinated cranes). No remarkable lesions were noted in any of the cranes during the necropsy examinations. Histopathological findings are available for only four of the cranes at this time. Three of those had mild to moderate encephalitis, myelitis, and myocarditis. Initial histopathological findings also indicated a difference in the lesions found in the brains of the vaccinated versus unvaccinated cranes. The fourth crane was a vaccinated unchallenged control that had none of the lesions described. We concluded, based on the findings of no adverse reactions and the higher titers and reduced viremia seen in the cranes, that, indeed, the vaccine is safe for use in cranes and can be effective in reducing the severity of a natural infection. We would recommend this vaccine for use in adult cranes. A companion study is looking at the safety and efficacy of the vaccine for crane chicks as young as 7-10 days of age and that will be reported at a later date.

Lifting clamp positively grips structural shapes

NASA Technical Reports Server (NTRS)

Reinhardt, E. C.

1966-01-01

Welded steel clamps securely grip structural shapes of various sizes for crane operations. The clamp has adjustable clamping jaws and screw-operated internal v-jaws and provides greater safety than hoisting slings presently used. The structural member can be rotated in any manner, angle, or direction without being released by the clamp.

CMOS Active-Pixel Image Sensor With Simple Floating Gates

NASA Technical Reports Server (NTRS)

Fossum, Eric R.; Nakamura, Junichi; Kemeny, Sabrina E.

1996-01-01

Experimental complementary metal-oxide/semiconductor (CMOS) active-pixel image sensor integrated circuit features simple floating-gate structure, with metal-oxide/semiconductor field-effect transistor (MOSFET) as active circuit element in each pixel. Provides flexibility of readout modes, no kTC noise, and relatively simple structure suitable for high-density arrays. Features desirable for "smart sensor" applications.

Use of ultralight aircraft for introducing migratory crane populations

USGS Publications Warehouse

Clegg, K.R.; Lewis, J.C.; Ellis, D.H.; Urbanek, Richard P.; Stahlecker, Dale

1997-01-01

Objectives were to determine if captive-reared cranes could be led behind an ultralight aircraft (UL) along a migration route and, if after release on a wintering area, they would integrate with wild cranes and migrate north in spring to their natal area without assistance. Greater sandhill cranes (Grus canadensis tabida) were used as the research surrogate for whooping cranes (Grus americana). In 1995, the senior author raised 15 cranes to fledging and trained them to respond to his vocal imitation of a sandhill crane brood call. Chicks learned to follow him as he walked, drove an all-terrain vehicle (ATV), or piloted an UL. The caretakers were not in crane costumes. Cranes were tame but allowed to roam at will without accompanying humans part of the day and were penned at night. Daily excursions provided exposure to habitats, foods, and predators the birds would encounter after release into the wild. In mid-October 1995, 11 radio-tagged cranes were led in migration from Grade, Idaho to Bosque del Apache National Wildlife Refuge (BdANWR), central New Mexico, and released near wild wintering sandhill cranes. The 1,204km migration took 11 days, including 1 day when the aircraft were grounded due to a winter storm. Hazards encountered enroute included mountainous terrain, turbulent air, and attacks by gold eagles (Aquila chrysaetos). On the wintering ground, hazards included crane hunters and coyotes (Canis latrans). Within 2 days after release at the BdANWR wintering site, the research cranes were associating with and imitating the behavior of wild cranes. The 4 surviving birds migrated north in spring 1996 and at the time of this writing 2 were within 53 km of their natal area in Idaho.

The African Crane Database (1978-2014): Records of three threatened crane species (Family: Gruidae) from southern and eastern Africa.

PubMed

Smith, Tanya; Page-Nicholson, Samantha; Morrison, Kerryn; Gibbons, Bradley; Jones, M Genevieve W; van Niekerk, Mark; Botha, Bronwyn; Oliver, Kirsten; McCann, Kevin; Roxburgh, Lizanne

2016-01-01

The International Crane Foundation (ICF) / Endangered Wildlife Trust's (EWT) African Crane Conservation Programme has recorded 26 403 crane sightings in its database from 1978 to 2014. This sightings collection is currently ongoing and records are continuously added to the database by the EWT field staff, ICF/EWT Partnership staff, various partner organizations and private individuals. The dataset has two peak collection periods: 1994-1996 and 2008-2012. The dataset collection spans five African countries: Kenya, Rwanda, South Africa, Uganda and Zambia; 98% of the data were collected in South Africa. Georeferencing of the dataset was verified before publication of the data. The dataset contains data on three African crane species: Blue Crane Anthropoides paradiseus , Grey Crowned Crane Balearica regulorum and Wattled Crane Bugeranus carunculatus . The Blue and Wattled Cranes are classified by the IUCN Red List of Threatened Species as Vulnerable and the Grey Crowned Crane as Endangered. This is the single most comprehensive dataset published on African Crane species that adds new information about the distribution of these three threatened species. We hope this will further aid conservation authorities to monitor and protect these species. The dataset continues to grow and especially to expand in geographic coverage into new countries in Africa and new sites within countries. The dataset can be freely accessed through the Global Biodiversity Information Facility data portal.

46 CFR 126.130 - Cranes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Cranes. 126.130 Section 126.130 Shipping COAST GUARD... § 126.130 Cranes. (a) Except as provided by paragraph (b) of this section, cranes, if installed, must... chapter. (b) The manufacturer of a crane may have tests and inspections conducted in compliance with § 107...

76 FR 66617 - Airworthiness Directives; Erickson Air-Crane Incorporated Model S-64F Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... Airworthiness Directives; Erickson Air-Crane Incorporated Model S-64F Helicopters AGENCY: Federal Aviation... the Erickson Air-Crane (Erickson Air-Crane) Model S-64F helicopters. The amendment requires, at..., contact Erickson Air-Crane Incorporated, 3100 Willow Springs Road, P.O. Box 3247, Central Point, OR 97502...

46 CFR 126.130 - Cranes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cranes. 126.130 Section 126.130 Shipping COAST GUARD... § 126.130 Cranes. (a) Except as provided by paragraph (b) of this section, cranes, if installed, must... chapter. (b) The manufacturer of a crane may have tests and inspections conducted in compliance with § 107...

Extraction of the gate capacitance coupling coefficient in floating gate non-volatile memories: Statistical study of the effect of mismatching between floating gate memory and reference transistor in dummy cell extraction methods

NASA Astrophysics Data System (ADS)

Rafhay, Quentin; Beug, M. Florian; Duane, Russell

2007-04-01

This paper presents an experimental comparison of dummy cell extraction methods of the gate capacitance coupling coefficient for floating gate non-volatile memory structures from different geometries and technologies. These results show the significant influence of mismatching floating gate devices and reference transistors on the extraction of the gate capacitance coupling coefficient. In addition, it demonstrates the accuracy of the new bulk bias dummy cell extraction method and the importance of the β function, introduced recently in [Duane R, Beug F, Mathewson A. Novel capacitance coupling coefficient measurement methodology for floating gate non-volatile memory devices. IEEE Electr Dev Lett 2005;26(7):507-9], to determine matching pairs of floating gate memory and reference transistor.

Clinical pathology results from cranes with experimental West Nile Virus infection

USGS Publications Warehouse

Olsen, Glenn H.

2011-01-01

Sandhill cranes (Grus canadensis) were vaccinated for and then challenged with West Nile virus. Resulting titers demonstrated protection in the vaccinated-challenged cranes as compared to the unvaccinated-challenged cranes. Clinical pathology results showed challenged cranes, whether vaccinated or not, had a decrease in their hematocrits and an elevation of 2.5-fold in their white blood cell counts as compared to unchallenged control sandhill cranes. No differences were apparent in the differential counts of heterophils and lymphocytes.

Changes in agriculture and abundance of snow geese affect carrying capacity of sandhill cranes in Nebraska

USGS Publications Warehouse

Pearse, A.T.; Krapu, G.L.; Brandt, D.A.; Kinzel, P.J.

2010-01-01

The central Platte River valley (CPRV) in Nebraska, USA, is a key spring-staging area for approximately 80 of the midcontinent population of sandhill cranes (Grus canadensis; hereafter cranes). Evidence that staging cranes acquired less lipid reserves during the 1990s compared to the late 1970s and increases in use of the CPRV by snow geese (Chen caerulescens) prompted us to investigate availability of waste corn and quantify spatial and temporal patterns of crane and waterfowl use of the region. We developed a predictive model to assess impacts of changes in availability of corn and snow goose abundance under past, present, and potential future conditions. Over a hypothetical 60-day staging period, predicted energy demand of cranes and waterfowl increased 87 between the late 1970s and 19982007, primarily because peak abundances of snow geese increased by 650,000 and cranes by 110,000. Compared to spring 1979, corn available when cranes arrived was 20 less in 1998 and 68 less in 1999; consequently, the area of cornfields required to meet crane needs increased from 14,464 ha in 1979 to 32,751 ha in 1998 and 90,559 ha in 1999. Using a pooled estimate of 88 kg/ha from springs 19981999 and 20052007, the area of cornfields needed to supply food requirements of cranes and waterfowl increased to 65,587 ha and was greatest in the eastern region of the CPRV, where an estimated 54 of cranes, 47 of Canada geese (Branta canadensis), 45 of greater white-fronted geese (Anser albifrons), and 46 of snow geese occurred during ground surveys. We estimated that a future reduction of 25 in available corn or cornfields would increase daily foraging flight distances of cranes by 2738. Crane use and ability of cranes to store lipid reserves in the CPRV could be reduced substantially if flight distance required to locate adequate corn exceeded a physiological maximum distance cranes could fly in search of food. Options to increase carrying capacity for cranes include increasing accessibility of cornfields by restoring degraded river channels to disperse roosting cranes and increasing wetland availability in the Rainwater Basin to attract snow geese using the CPRV. ?? The Wildlife Society.

A comparison of behavior for two cohorts of captive-reared greater sandhill cranes released in northern Arizona

USGS Publications Warehouse

Mummert, D.P.; Chambers, C.L.; Ellis, D.H.

2001-01-01

To determine how the behavior of greater sandhill cranes (Grus canadensis tabida) changes according to time of year, time of day, and number of days after release, we observed the activities of 2 groups of captive-reared greater sandhill cranes at Mormon Lake, northern Arizona. The behaviors we compared were alert, loafing, sleeping, foraging, preening, locomotion, and other. We found costume-reared subadult greater sandhill cranes that were established at the study site for a year spent more time foraging and being alert towards predators than parent-reared juvenile greater sandhill cranes that were recently released from captivity. We also found that with time juvenile sandhill cranes were increasingly alert and spent less time loafing. It appeared that captive-reared juvenile sandhill cranes learn behavior important for survival from previously released captive-reared cranes.

KSC-07pd3637

NASA Image and Video Library

2007-12-14

KENNEDY SPACE CENTER, FLA. -- A pair of sandhill cranes search for food on the grounds near the Headquarters Building at NASA's Kennedy Space Center. Sandhill cranes are primarily birds of open freshwater wetlands and shallow marshes and in Florida use seasonally variable wetlands, grasslands, and palm and pine savannahs. Sandhill cranes are omnivorous, feeding on a wide variety of plant materials (including waste grains) and small vertebrates and invertebrates, both on land and in shallow wetlands. Florida's sandhill crane population increases as cranes from northern states spend the winter in Florida. Florida sandhill cranes stay with the same mate for several years and young sandhills stay with their parents until they are about 10 months old. Like their endangered relatives the whooping cranes, sandhills live to be older than most birds. In fact, some sandhill cranes live up to 20 years. Photo credit: NASAJim Grossmann

KSC-07pd3635

NASA Image and Video Library

2007-12-14

KENNEDY SPACE CENTER, FLA. -- Sandhill cranes stalk a parking lot near the Headquarters Building at NASA's Kennedy Space Center. Sandhill cranes are primarily birds of open freshwater wetlands and shallow marshes and in Florida use seasonally variable wetlands, grasslands, and palm and pine savannahs. Sandhill cranes are omnivorous, feeding on a wide variety of plant materials (including waste grains) and small vertebrates and invertebrates, both on land and in shallow wetlands. Florida's sandhill crane population increases as cranes from northern states spend the winter in Florida. Florida sandhill cranes stay with the same mate for several years and young sandhills stay with their parents until they are about 10 months old. Like their endangered relatives the whooping cranes, sandhills live to be older than most birds. In fact, some sandhill cranes live up to 20 years. Photo credit: NASAJim Grossmann

KSC-07pd3638

NASA Image and Video Library

2007-12-14

KENNEDY SPACE CENTER, FLA. -- A sandhill crane is on the lookout on grounds near the Headquarters Building at NASA's Kennedy Space Center. Sandhill cranes are primarily birds of open freshwater wetlands and shallow marshes and in Florida use seasonally variable wetlands, grasslands, and palm and pine savannahs. Sandhill cranes are omnivorous, feeding on a wide variety of plant materials (including waste grains) and small vertebrates and invertebrates, both on land and in shallow wetlands. Florida's sandhill crane population increases as cranes from northern states spend the winter in Florida. Florida sandhill cranes stay with the same mate for several years and young sandhills stay with their parents until they are about 10 months old. Like their endangered relatives the whooping cranes, sandhills live to be older than most birds. In fact, some sandhill cranes live up to 20 years. Photo credit: NASAJim Grossmann

KSC-07pd3636

NASA Image and Video Library

2007-12-14

KENNEDY SPACE CENTER, FLA. -- A sandhill crane is on the lookout in a parking lot near the Headquarters Building at NASA's Kennedy Space Center. Sandhill cranes are primarily birds of open freshwater wetlands and shallow marshes and in Florida use seasonally variable wetlands, grasslands, and palm and pine savannahs. Sandhill cranes are omnivorous, feeding on a wide variety of plant materials (including waste grains) and small vertebrates and invertebrates, both on land and in shallow wetlands. Florida's sandhill crane population increases as cranes from northern states spend the winter in Florida. Florida sandhill cranes stay with the same mate for several years and young sandhills stay with their parents until they are about 10 months old. Like their endangered relatives the whooping cranes, sandhills live to be older than most birds. In fact, some sandhill cranes live up to 20 years. Photo credit: NASAJim Grossmann

The African Crane Database (1978-2014): Records of three threatened crane species (Family: Gruidae) from southern and eastern Africa

PubMed Central

Smith, Tanya; Page-Nicholson, Samantha; Gibbons, Bradley; Jones, M. Genevieve W.; van Niekerk, Mark; Botha, Bronwyn; Oliver, Kirsten; McCann, Kevin

2016-01-01

Abstract Background The International Crane Foundation (ICF) / Endangered Wildlife Trust’s (EWT) African Crane Conservation Programme has recorded 26 403 crane sightings in its database from 1978 to 2014. This sightings collection is currently ongoing and records are continuously added to the database by the EWT field staff, ICF/EWT Partnership staff, various partner organizations and private individuals. The dataset has two peak collection periods: 1994-1996 and 2008-2012. The dataset collection spans five African countries: Kenya, Rwanda, South Africa, Uganda and Zambia; 98% of the data were collected in South Africa. Georeferencing of the dataset was verified before publication of the data. The dataset contains data on three African crane species: Blue Crane Anthropoides paradiseus, Grey Crowned Crane Balearica regulorum and Wattled Crane Bugeranus carunculatus. The Blue and Wattled Cranes are classified by the IUCN Red List of Threatened Species as Vulnerable and the Grey Crowned Crane as Endangered. New information This is the single most comprehensive dataset published on African Crane species that adds new information about the distribution of these three threatened species. We hope this will further aid conservation authorities to monitor and protect these species. The dataset continues to grow and especially to expand in geographic coverage into new countries in Africa and new sites within countries. The dataset can be freely accessed through the Global Biodiversity Information Facility data portal. PMID:27956850

Aeroelastic impact of above-rated wave-induced structural motions on the near-wake stability of a floating offshore wind turbine rotor

NASA Astrophysics Data System (ADS)

Rodriguez, Steven; Jaworski, Justin

2017-11-01

The impact of above-rated wave-induced motions on the stability of floating offshore wind turbine near-wakes is studied numerically. The rotor near-wake is generated using a lifting-line free vortex wake method, which is strongly coupled to a finite element solver for kinematically nonlinear blade deformations. A synthetic time series of relatively high-amplitude/high-frequency representative of above-rated conditions of the NREL 5MW referece wind turbine is imposed on the rotor structure. To evaluate the impact of these above-rated conditions, a linear stability analysis is first performed on the near wake generated by a fixed-tower wind turbine configuration at above-rated inflow conditions. The platform motion is then introduced via synthetic time series, and a stability analysis is performed on the wake generated by the floating offshore wind turbine at the same above-rated inflow conditions. The stability trends (disturbance modes versus the divergence rate of vortex structures) of the two analyses are compared to identify the impact that above-rated wave-induced structural motions have on the stability of the floating offshore wind turbine wake.

Study of lifting operation of a tripod foundation for offshore wind turbine

NASA Astrophysics Data System (ADS)

Zhu, H.; Li, L.; Ong, M. C.

2017-12-01

This study addresses numerical analysis of the installation of a tripod foundation using a heavy lift vessel (HLV). Limiting sea states are firstly predicted in the frequency domain based on crane tip vertical motions using linear transfer functions. Then, numerical modelling and simulations are carried out in the time domain to analyse the coupled dynamic system taking into consideration of the nonlinearities of the system. In time-domain analysis, two lifting phases are brought into focus, i.e., the lift-off and the lowering phases. For the lift-off phase, two scenarios are considered, i.e., lift-off from the own deck of the HLV and lift-off from a transport barge. Moreover, comparative studies using two types of installation vessels, a floating vessel and a Jack-up, are investigated for the lowering process. Critical responses including the motions of the tripod and the lift wire tensions are presented and compared under various environmental and loading conditions.

Casting Control of Floating-films into Ribbon-shape Structure by modified Dynamic FTM

NASA Astrophysics Data System (ADS)

Tripathi, A.; Pandey, M.; Nagamatsu, S.; Pandey, S. S.; Hayase, S.; Takashima, W.

2017-11-01

We have developed a new method to obtain Ribbon-shaped floating films via dynamic casting of floating-film and transfer method (dynamic-FTM). Dynamic-FTM is a unique method to prepare oriented thin-film of conjugated polymers (CPs) which is quick and easy. This method has several advantages as compared to the other conventional casting procedure to prepare oriented CP films. In the conventional dynamic FTM appearance of large scale circular orientation poses difficulty not only for practical applications but also hinders the detailed analysis of the orientation mechanism. In this present work, pros and cons of this newly proposed ribbon-shaped floating-film have been discussed in detail from those of the conventional floating-film prepared by dynamic-FTM.

Catamaran or semi-submersible for floating platform - selection of a better design

NASA Astrophysics Data System (ADS)

Qasim, Idrees; Gao, Liangtian; Peng, Duojin; Liu, Bo

2018-02-01

With nonstop advancement in marine engineering, more and more new structures are being designed and explored for tidal current energy. There are three different kinds of support structures for tidal current power station mostly in use, which are sea-bed mounted/gravity based system, pile mounted system and floating moored platform. Comparing all of them, the floating mooring system is most suitable for deep water systems and the application of this arrangement is widely usable. In this paper, a semi-submersible and a catamaran as floating platforms for tidal current power stations are studied are compared on the basis of its economics, efficiency of turbine and stability of the station. Based on basic ship theory and using software MAXSURF, the stability of Catamaran tidal current power station is also calculated. It is found that the catamaran design is optimal choice.

29 CFR 1919.71 - Unit proof test and examination of cranes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Unit proof test and examination of cranes. 1919.71 Section... § 1919.71 Unit proof test and examination of cranes. (a) Unit proof tests of cranes shall be carried out at the following times: (1) In the cases of new cranes, before initial use and every 4 years...

30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What requirements must I follow for cranes and... follow for cranes and other material-handling equipment? (a) All cranes installed on fixed platforms must... Maintenance of Offshore Cranes (API RP 2D), incorporated by reference as specified in 30 CFR 250.198. (b) All...

29 CFR 1919.71 - Unit proof test and examination of cranes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Unit proof test and examination of cranes. 1919.71 Section... § 1919.71 Unit proof test and examination of cranes. (a) Unit proof tests of cranes shall be carried out at the following times: (1) In the cases of new cranes, before initial use and every 4 years...

29 CFR 1918.55 - Cranes (See also § 1918.11).

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Operator's station. (1) Cranes with missing, broken, cracked, scratched, or dirty glass (or equivalent...) Unattended cranes. When cranes are left unattended between work periods, § 1918.66(b) (4)(i) through (v...

29 CFR 1918.55 - Cranes (See also § 1918.11).

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Operator's station. (1) Cranes with missing, broken, cracked, scratched, or dirty glass (or equivalent...) Unattended cranes. When cranes are left unattended between work periods, § 1918.66(b) (4)(i) through (v...

29 CFR 1918.55 - Cranes (See also § 1918.11).

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Operator's station. (1) Cranes with missing, broken, cracked, scratched, or dirty glass (or equivalent...) Unattended cranes. When cranes are left unattended between work periods, § 1918.66(b) (4)(i) through (v...

Concrete structure construction on the Moon

NASA Technical Reports Server (NTRS)

Matsumoto, Shinji; Namba, Haruyuki; Kai, Yoshiro; Yoshida, Tetsuji

1992-01-01

This paper describes a precast prestressed concrete structure system on the Moon and erection methods for this system. The horizontal section of the structural module is hexagonal so that various layouts of the modules are possible by connecting the adjacent modules to each other. For erection of the modules, specially designed mobile cranes are used.

Efficacy of eastern encephalitis immunization in whooping cranes

USGS Publications Warehouse

Olsen, Glenn H.; Turell, M.J.; Pagac, B.B.

1997-01-01

An epizootic of eastern equine encephalitis (EEE) at the Patuxent Wildlife Research Center (PWRC), Laurel, Maryland (USA), in 1989 provided an opportunity to determine if EEE immunization protected whooping cranes (Grus americana). Based on seroconversion of 31 % of sympatric hatch-year sandhill cranes, Grus canadensis, and a previous 35% case fatality rate in whooping cranes, 17 (37%) of the 46 susceptible whooping cranes should have been exposed to virus and six should have died. As there were no deaths in these birds, the EEE vaccination program appeared to be efficacious in this whooping crane population.

Determination of vertical pressures on running wheels of freight trolleys of bridge type cranes

NASA Astrophysics Data System (ADS)

Goncharov, K. A.; Denisov, I. A.

2018-03-01

The problematic issues of the design of the bridge-type trolley crane, connected with ensuring uniform load distribution between the running wheels, are considered. The shortcomings of the existing methods of calculation of reference pressures are described. The results of the analytical calculation of the pressure of the support wheels are compared with the results of the numerical solution of this problem for various schemes of trolley supporting frames. Conclusions are given on the applicability of various methods for calculating vertical pressures, depending on the type of metal structures used in the trolley.

DIFMOS - A floating-gate electrically erasable nonvolatile semiconductor memory technology. [Dual Injector Floating-gate MOS

NASA Technical Reports Server (NTRS)

Gosney, W. M.

1977-01-01

Electrically alterable read-only memories (EAROM's) or reprogrammable read-only memories (RPROM's) can be fabricated using a single-level metal-gate p-channel MOS technology with all conventional processing steps. Given the acronym DIFMOS for dual-injector floating-gate MOS, this technology utilizes the floating-gate technique for nonvolatile storage of data. Avalanche injection of hot electrons through gate oxide from a special injector diode in each bit is used to charge the floating gates. A second injector structure included in each bit permits discharge of the floating gate by avalanche injection of holes through gate oxide. The overall design of the DIFMOS bit is dictated by the physical considerations required for each of the avalanche injector types. The end result is a circuit technology which can provide fully decoded bit-erasable EAROM-type circuits using conventional manufacturing techniques.

Hematological and serum chemistry norms for sandhill and whooping cranes

USGS Publications Warehouse

Olsen, Glenn H.; Hendricks, M.M.; Dressler, L.E.

2001-01-01

The normal values used as a diagnostic tool and for comparison of cranes were established in the early 1970's. In that early study, no effort was made to look at factors such as age, sex, or subspecies. In addition, during the early study disease problems (primarily disseminated visceral coccidiosis) and nutritional problems were undiagnosed and uncontrolled. For 2 years during the annual health examinations of cranes at the USGS Patuxent Wildlife Research Center (Patuxent), we collected blood from healthy cranes for analysis. We found significant differences between the values reported from the 1970's and the values seen in this study for 8 blood parameters for Florida sandhill cranes (Grus canadensis pratensis), 6 blood parameters for greater sandhill cranes (G. c. tabida), and 6 blood parameters for whooping cranes (Grus americana). In addition, there were significant differences for some hematology and serum chemistry values based on the age of the cranes.

[Genetic passportization and identification of Siberian cranes (Grus leucogeranus Pallas) in captivity].

PubMed

Mudrik, E A; Kashentseva, T A; Gamburg, E A; Politov, D V

2014-01-01

The genetic diversity of the founders of an artificial population of the Siberian crane Grus leucogeranus Pallas (rare species of cranes) was characterized using 10 microsatellite loci. It was established that the allelic diversity (on average, 5.9 alleles per locus) and genic (H(o) = 0.739) diversity of the Siberian crane is rather high and comparable with the estimations for natural populations of different crane species. Genetic passportization of the birds (119 individuals) from the register of the Siberian crane International Studbook was carried out at the initial stage. The efficiency of genetic passportization for individual identification, identification of the origin, paternity analysis, and exclusion of inbreeding was demonstrated in Siberian cranes under natural mating and artificial insemination. Cases of natural reproduction in pairs of Siberian cranes imprinted to the human and continuous storage of spermatozoa in the female reproductive ducts were registered.

Overhead Crane Computer Model

NASA Astrophysics Data System (ADS)

Enin, S. S.; Omelchenko, E. Y.; Fomin, N. V.; Beliy, A. V.

2018-03-01

The paper has a description of a computer model of an overhead crane system. The designed overhead crane system consists of hoisting, trolley and crane mechanisms as well as a payload two-axis system. With the help of the differential equation of specified mechanisms movement derived through Lagrange equation of the II kind, it is possible to build an overhead crane computer model. The computer model was obtained using Matlab software. Transients of coordinate, linear speed and motor torque of trolley and crane mechanism systems were simulated. In addition, transients of payload swaying were obtained with respect to the vertical axis. A trajectory of the trolley mechanism with simultaneous operation with the crane mechanism is represented in the paper as well as a two-axis trajectory of payload. The designed computer model of an overhead crane is a great means for studying positioning control and anti-sway control systems.

Determination of the State of Strain of Large Floating Covers Using Unmanned Aerial Vehicle (UAV) Aided Photogrammetry

PubMed Central

Ong, Wern Hann; Chiu, Wing Kong; Kuen, Thomas; Kodikara, Jayantha

2017-01-01

Floating covers used in waste water treatment plants are one of the many structures formed with membrane materials. These structures are usually large and can spread over an area measuring 470 m × 170 m. The aim of this paper is to describe recent work to develop an innovative and effective approach for structural health monitoring (SHM) of such large membrane-like infrastructure. This paper will propose a potentially cost-effective non-contact approach for full-field strain and stress mapping using an unmanned aerial vehicle (UAV) mounted with a digital camera and a global positioning system (GPS) tracker. The aim is to use the images acquired by the UAV to define the geometry of the floating cover using photogrammetry. In this manner, any changes in the geometry of the floating cover due to forces acting beneath resulting from its deployment and usage can be determined. The time-scale for these changes is in terms of weeks and months. The change in the geometry can be implemented as input conditions to a finite element model (FEM) for stress prediction. This will facilitate the determination of the state of distress of the floating cover. This paper investigates the possibility of using data recorded from a UAV to predict the strain level and assess the health of such structures. An investigation was first conducted on a laboratory sized membrane structure instrumented with strain gauges for comparison against strains, which were computed from 3D scans of the membrane geometry. Upon validating the technique in the laboratory, it was applied to a more realistic scenario: an outdoor test membrane structure and capable UAV were constructed to see if the shape of the membrane could be computed. The membrane displacements were then used to calculate the membrane stress and strain, state demonstrating a new way to perform structural health monitoring on membrane structures. PMID:28788081

Determination of the State of Strain of Large Floating Covers Using Unmanned Aerial Vehicle (UAV) Aided Photogrammetry.

PubMed

Ong, Wern Hann; Chiu, Wing Kong; Kuen, Thomas; Kodikara, Jayantha

2017-07-28

Floating covers used in waste water treatment plants are one of the many structures formed with membrane materials. These structures are usually large and can spread over an area measuring 470 m × 170 m. The aim of this paper is to describe recent work to develop an innovative and effective approach for structural health monitoring (SHM) of such large membrane-like infrastructure. This paper will propose a potentially cost-effective non-contact approach for full-field strain and stress mapping using an unmanned aerial vehicle (UAV) mounted with a digital camera and a global positioning system (GPS) tracker. The aim is to use the images acquired by the UAV to define the geometry of the floating cover using photogrammetry. In this manner, any changes in the geometry of the floating cover due to forces acting beneath resulting from its deployment and usage can be determined. The time-scale for these changes is in terms of weeks and months. The change in the geometry can be implemented as input conditions to a finite element model (FEM) for stress prediction. This will facilitate the determination of the state of distress of the floating cover. This paper investigates the possibility of using data recorded from a UAV to predict the strain level and assess the health of such structures. An investigation was first conducted on a laboratory sized membrane structure instrumented with strain gauges for comparison against strains, which were computed from 3D scans of the membrane geometry. Upon validating the technique in the laboratory, it was applied to a more realistic scenario: an outdoor test membrane structure and capable UAV were constructed to see if the shape of the membrane could be computed. The membrane displacements were then used to calculate the membrane stress and strain, state demonstrating a new way to perform structural health monitoring on membrane structures.

Cryopreservation of crane semen

USGS Publications Warehouse

Gee, G.F.; Harris, James

1991-01-01

The method for the cryopreservation of crane semen at Patuxent Wildlife Research Center is described in detail. Cryopreservation is useful for the long-term storage of crane semen and for specialized propagation needs. A 50% fertility rate from most sandhill cranes, Grus canadensis, inseminated with frozen-thawed semen can be expected. Additional research should improve the fertility rate and determine how applicable the technique is to other crane species.

Lunar crane system

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.

1991-01-01

In many lunar construction scenarios, mechanical cranes in some form will be indispensible in moving large masses around with various degrees of fine positioning. While thorough experience exists in the use of terrestrial cranes new thinking is required about the design of cranes to be used in extraterrestrial construction. The primary driving force for this new thinking is the need to automate the crane system so that space cranes can be operated as telerobotic machines with a large number of automatic capabilities. This is true because in extraterrestrial construction human resources will need to be critically rationed. The design problems of mechanisms and control systems for a lunar crane must deal with at least two areas of performance. First, the automated crane must be capable of maneuvering a large mass, so that when the mass arrives at the target position there are only small vibrations. Secondly, any residue vibrations must be automatically damped out and a fine positioning must be achieved. For extraterrestrial use there are additional challenges to a crane design - for example, to design a crane system so that it can be transformed for other construction uses. This initial project in crane design does not address such additional issues, although they may be the subject of future CSC research. To date the Center has designed and analyzed many mechanisms. The fundamental problem of trade-offs between passively stabilizing the load and actively controlling the load by actuators was extensively studied. The capability of 3D dynamics modeling now exists for such studies. A scaled model of a lunar crane was set up and it has been most fruitful in providing basic understanding of lunar cranes. Due to an interesting scaling match-up, this scaled model exhibits the load vibration frequencies one would expect in the real lunar case. Using the analytical results achieved to date, a laboratory crane system is now being developed as a test bed for verifying a wide variety of mechanisms and control designs. Future development will be aimed at making the crane system a telerobotic test bed into which external sensors such as computer vision systems, and other small robotic devices such as CSC lunar rovers, will be integrated.

Avian tuberculosis and salmonellosis in a whooping crane (Grus americana)

USGS Publications Warehouse

Stroud, R.K.; Thoen, C.O.; Duncan, R.M.

1986-01-01

The whooping crane has been the subject of intensive scientific study and management because it is an endangered species and has high public interest. Programs have been developed to identify critical habitat, to increase production through captive breeding, and in recent years, to use sandhill cranes (Grus canadensis) as surrogate parents in establishing new populations of wild whooping cranes. Only a few reports describing diseases and parasites in wild whooping cranes appear in the literature because opportunities to secure specimens are limited for this rare, protected bird (for review, see Carpenter and Derrickson, In Proc. International Crane Workshop of 1983, Bharatur, India, in press). Avian tuberculosis and concurrent salmonellosis in a wild whooping crane are described in this case report.

Heavy metal contamination status of Japanese cranes (Grus japonensis) in east Hokkaido, Japan--extensive mercury pollution.

PubMed

Teraoka, Hiroki; Kumagai, Yoshihiro; Iwai, Hisae; Haraguchi, Kensaku; Ohba, Takashi; Nakai, Kunihiko; Satoh, Hiroshi; Sakamoto, Mineshi; Momose, Kunikazu; Masatomi, Hiroyuki; Hiraga, Takeo

2007-02-01

Japanese cranes (Grus japonensis) of eastern Hokkaido, Japan, and migrants between the Amur River basin and the eastern China-Korea Peninsula, live around fresh and brackish wetlands. Only a few thousand cranes are confirmed to exist in the world, so they are under threat of extinction. To understand the adverse effects of metal accumulation, we measured concentrations of three heavy metals in the liver, kidney, and muscle of 93 Japanese cranes from Hokkaido. The cranes were classified into six categories according to their sex and three life stages. Cadmium and mercury (Hg: total mercury) showed age-dependent but not sex-dependent accumulation in the liver and kidney. Twenty cranes showed 30 microg/g or higher levels of Hg in dry tissue and five adult cranes had more than 100 microg/g in their livers or kidneys. Cadmium concentrations were generally lower in all samples. Two adult cranes showed extremely high lead levels of more than 30 microg/g in their livers, suggesting lead poisoning. These results have highlighted the widespread and high levels of Hg pollution in Japanese cranes in Hokkaido, Japan.

Efficacy of eastern equine encephalitis immunization in whooping cranes.

PubMed

Olsen, G H; Turell, M J; Pagac, B B

1997-04-01

An epizootic of eastern equine encephalitis (EEE) at the Patuxent Wildlife Research Center (PWRC), Laurel, Maryland (USA), in 1989 provided an opportunity to determine if EEE immunization protected whooping cranes (Grus americana). Based on seroconversion of 31% of sympatric hatch-year sandhill cranes, Grus canadensis, and a previous 35% case fatality rate in whooping cranes, 17 (37%) of the 46 susceptible whooping cranes should have been exposed to virus and six should have died. As there were no deaths in these birds, the EEE vaccination program appeared to be efficacious in this whooping crane population.

Mortality of Mississippi Sandhill Crane chicks

USGS Publications Warehouse

Olsen, Glenn H.

2004-01-01

Mississippi sandhill cranes (Grus canadensis pulla) are a highly endangered species that live in the wild in 1 county in Mississippi. As part of a large effort to restore these endangered cranes, we are conducting a project to look at the causes of mortality in crane chicks on the Mississippi Sandhill Crane National Wildlife Refuge in Gautier, MS, USA. This includes surgically implanting miniature radio transmitters in crane chicks to gather data on mortality. This article describes some of the practical difficulties in conducting this type of project in a savannah and swamp location along the Gulf Coast of the USA.

Mycotoxin-induced disease in captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis)

USGS Publications Warehouse

Olsen, Glenn H.; Carpenter, J.W.; Gee, G.F.; Thomas, N.J.; Dein, F.J.

1995-01-01

In 1987, an epizootic in cranes at the Patuxent Wildlife Research Center, Laurel, Maryland, USA, caused illness in 80% of 300 captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis) and death of 15 of these cranes. Gross pathology findings were inconclusive and consisted of dehydration, atrophy of fat, renal insufficiency, and small spleens. Extensive testing resulted in isolation of Fusarium sp. mold from constituents of the grain-based diet. Low levels of two mycotoxins, T2 (1-2 ppm) and deoxynivalenol (0.4 ppm), were isolated from the pelleted feed.

Pulmonary lesions in disseminated visceral coccidiosis of sandhill and whooping cranes

USGS Publications Warehouse

Novilla, M.N.; Carpenter, J.W.; Jeffers, T.K.; White, S.L.

1989-01-01

Fifty cranes, consisting of 46 sandhill (Grus canadensis) and four whooping cranes (Grus americana), were studied. Eighteen sandhill cranes and the four whooping cranes were naturally infected with disseminated visceral coccidiosis (DVC). The remaining sandhill cranes were chicks experimentally infected with oocysts of Eimeria reichenowi and/or E. gruis; five chicks served as controls. There were no clinical signs attributed to respiratory infection. Necropsy of naturally infected adult birds revealed nodules in many organs, including the lung, air sacs, trachea and nares. Artificially infected sandhill cranes and the whooping crane chicks that died from DVC had congestion and consolidated areas in the lung with frothy fluid in the airways. Grossly visible nodules were observed from 10 days postinoculation. Granulomatous pneumonia and tracheitis were observed with light microscopy. Lesions were associated with merogonic and gametogonic stages of eimerian coccidia. Granulomas and granulomatous foci contained parasitized large mononuclear cells. Merogonic stages were seen in lymphoid cells by ultrastructural examination. Oocysts were observed in the trachea and bronchial mucosa and admixed with exudate in the airways, indicating that crane eimerians can complete their life cycle at these sites. Of the few eimeriid coccidia that have extraintestinal stages of development in birds and mammals, only the species in cranes complete their life cycle in both the digestive and respiratory tracts.

Control strategies for crane systems: A comprehensive review

NASA Astrophysics Data System (ADS)

Ramli, Liyana; Mohamed, Z.; Abdullahi, Auwalu M.; Jaafar, H. I.; Lazim, Izzuddin M.

2017-10-01

Crane systems are tremendously utilised in numerous heavy load transportation industries, and therefore, the control of crane systems is a well-established research field. As the last review paper was published more than a decade ago, there is a lack of collected and organised information regarding the latest and the newest updates on control strategies for crane control systems. Hence, this paper presents a comprehensive review of crane control strategies discussing the latest research works during the years from 2000 to 2016. Various crane types and control issues are highlighted, followed by the main focus of this paper, an extensive review of the control schemes for diverse types of crane systems that have been carried out in the 21st century. A brief review on modelling of single-pendulum and double-pendulum crane systems is also given. In addition, anti-sway control systems for industrial cranes that are available on the market is described. This paper summarises most of the related work and also pays a special focus on research trends regarding the control of crane systems that have been previously published in the literature. It is envisaged that this review paper will be helpful to new researchers when identifying research directions for this particular area of interest.

Changes of mercury contamination in red-crowned cranes, Grus japonensis, in East Hokkaido, Japan.

PubMed

Teraoka, Hiroki; Tagami, Yukari; Kudo, Moe; Miura, Yoshiaki; Okamoto, Erika; Matsumoto, Fumio; Koga, Kimiya; Uebayashi, Akiko; Shimura, Ryoji; Inoue, Masako; Momose, Kunikazu; Masatomi, Hiroyuki; Kitazawa, Takio; Hiraga, Takeo; Subramanian, Annamalai

2012-07-01

Red-crowned cranes (Grus japonensis) are native to eastern Hokkaido (island population), in contrast to the mainland, which migrates between the Amur River basin and eastern China-Korea peninsula. During the 1990s we found that Red-crowned cranes in Hokkaido were highly contaminated with mercury: however, the source was unknown. We investigated the time trend of mercury contamination in Red-crowned cranes. Total mercury levels in the livers and kidneys from cranes dead in the 2000s were lower than those dead in the 1990s. Feather is a major pathway of mercury excretion for many bird species and is used as an indicator of blood mercury level during feather growth. As internal organs from the specimens collected before 1988 were not available, we analyzed the flight feather shavings from stuffed Red-crowned cranes dead in 1959-1987 and found that the mercury level of feathers from cranes dead in the 1960s and 1970s was not more than those from the cranes dead in the 2000s. These results suggest that mercury contamination in Red-crowned cranes in Hokkaido decreased temporally during the 1990s-2000s. This indicates the possible occurrence of some mercury pollution in Red-crowned cranes' habitat in this region in the 1990s or before.

Habitat-dependent changes in vigilance behaviour of Red-crowned Crane influenced by wildlife tourism.

PubMed

Li, Donglai; Liu, Yu; Sun, Xinghai; Lloyd, Huw; Zhu, Shuyu; Zhang, Shuyan; Wan, Dongmei; Zhang, Zhengwang

2017-11-30

The Endangered Red-crowned Crane (Grus japonensis) is one of the most culturally iconic and sought-after species by wildlife tourists. Here we investigate how the presence of tourists influence the vigilance behaviour of cranes foraging in Suaeda salsa salt marshes and S. salsa/Phragmites australis mosaic habitat in the Yellow River Delta, China. We found that both the frequency and duration of crane vigilance significantly increased in the presence of wildlife tourists. Increased frequency in crane vigilance only occurred in the much taller S. salsa/P. australis mosaic vegetation whereas the duration of vigilance showed no significant difference between the two habitats. Crane vigilance declined with increasing distance from wildlife tourists in the two habitats, with a minimum distance of disturbance triggering a high degree of vigilance by cranes identified at 300 m. The presence of wildlife tourists may represent a form of disturbance to foraging cranes but is habitat dependent. Taller P. australis vegetation serves primarily as a visual obstruction for cranes, causing them to increase the frequency of vigilance behaviour. Our findings have important implications for the conservation of the migratory red-crowned crane population that winters in the Yellow River Delta and can help inform visitor management.

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the.... During framing operations, employees shall not work under a pole or a structure suspended by a crane, A-frame or similar equipment unless the pole or structure is adequately supported. (g) Attaching the load...

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the.... During framing operations, employees shall not work under a pole or a structure suspended by a crane, A-frame or similar equipment unless the pole or structure is adequately supported. (g) Attaching the load...

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the.... During framing operations, employees shall not work under a pole or a structure suspended by a crane, A-frame or similar equipment unless the pole or structure is adequately supported. (g) Attaching the load...

Annual survival rate estimate of satellite transmitter–marked eastern population greater sandhill cranes

USGS Publications Warehouse

Fronczak, David L.; Andersen, David E.; Hanna, Everett E.; Cooper, Thomas R.

2015-01-01

Several surveys have documented the increasing population size and geographic distribution of Eastern Population greater sandhill cranes Grus canadensis tabida since the 1960s. Sport hunting of this population of sandhill cranes started in 2012 following the provisions of the Eastern Population Sandhill Crane Management Plan. However, there are currently no published estimates of Eastern Population sandhill crane survival rate that can be used to inform harvest management. As part of two studies of Eastern Population sandhill crane migration, we deployed solar-powered global positioning system platform transmitting terminals on Eastern Population sandhill cranes (n  =  42) at key concentration areas from 2009 to 2012. We estimated an annual survival rate for Eastern Population sandhill cranes from data resulting from monitoring these cranes by using the known-fates model in the MARK program. Estimated annual survival rate for adult Eastern Population sandhill cranes was 0.950 (95% confidence interval  =  0.885–0.979) during December 2009–August 2014. All fatalities (n  =  5) occurred after spring migration in late spring and early summer. We were unable to determine cause of death for crane fatalities in our study. Our survival rate estimate will be useful when combined with other population parameters such as the population index derived from the U.S. Fish and Wildlife Service fall survey, harvest, and recruitment rates to assess the effects of harvest on population size and trend and evaluate the effectiveness of management strategies.

ASME Nuclear Crane Standards for Enhanced Crane Safety and Increased Profit

NASA Astrophysics Data System (ADS)

Parkhurst, Stephen N.

2000-01-01

The ASME NOG-1 standard, 'Rules for Construction of Overhead and Gantry Cranes', covers top running cranes for nuclear facilities; with the ASME NUM-1 standard, 'Rules for Construction of Cranes, Monorails, and Hoists', covering the single girder, underhung, wall and jib cranes, as well as the monorails and hoists. These two ASME nuclear crane standards provide criteria for designing, inspecting and testing overhead handling equipment with enhanced safety to meet the 'defense-in-depth' approach of the United States Nuclear Regulatory Commission (USNRC) documents NUREG 0554 and NUREG 0612. In addition to providing designs for enhanced safety, the ASME nuclear crane standards provide a basis for purchasing overhead handling equipment with standard safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities. The ASME NOG-1 and ASME NUM-1 standards not only provide enhanced safety for handling a critical load, but also increase profit by minimizing the possibility of load drops, by reducing cumbersome operating restrictions, and by providing the foundation for a sound licensing position. The ASME nuclear crane standards can also increase profit by providing the designs and information to help ensure that the right standard equipment is purchased. Additionally, the ASME nuclear crane standards can increase profit by providing designs and information to help address current issues, such as the qualification of nuclear plant cranes for making 'planned engineered lifts' for steam generator replacement and decommissioning.

Compound floating pivot micromechanisms

DOEpatents

Garcia, Ernest J.

2001-04-24

A new class of tilting micromechanical mechanisms have been developed. These new mechanisms use compound floating pivot structures to attain far greater tilt angles than are practical using other micromechanical techniques. The new mechanisms are also capable of bi-directional tilt about multiple axes.

77 FR 73265 - Airworthiness Directives; Erickson Air-Crane Incorporated Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

... Airworthiness Directives; Erickson Air-Crane Incorporated Helicopters AGENCY: Federal Aviation Administration... Erickson Air-Crane Incorporated (Erickson) Model S-64F helicopters. This AD requires inspecting for... service information identified in this AD, contact Erickson Air-Crane Incorporated, ATTN: Chris Erickson...

Disseminated visceral coccidiosis in sandhill cranes

USGS Publications Warehouse

Carpenter, J.W.; Novilla, M.N.; Fayer, R.; Iverson, G.C.

1984-01-01

Disseminated visceral coccidiosis (DVC) caused by Eimeria spp was first recognized as a disease entity in captive sandhill cranes (Grus canadensis) and whooping cranes (G americana) at the Patuxent Wildlife Research Center. Because cranes produced at the Center are reintroduced to the wild to augment wild populations, studies involving both experimentally induced and natural infections were initiated to determine the potential or actual occurrence of DVC in wild Gruidae. Nine sandhill cranes dosed orally with eimerian oocysts of wild origin developed lesions characteristic of DVC. Extraintestinal granulomas associated with developing schizonts were found in 6 birds. Similar lesions were observed in wild sandhill cranes throughout parts of midwestern United States, Alaska, and Saskatchewan. These studies revealed the wide geographic distribution and the high frequency of occurrence of DVC in wild cranes.

Varying Land-Use Has an Influence on Wattled and Grey Crowned Cranes' Abundance and Distribution in Driefontein Grasslands Important Bird Area, Zimbabwe.

PubMed

Fakarayi, Togarasei; Mashapa, Clayton; Gandiwa, Edson; Kativu, Shakkie

2016-01-01

Three species of cranes are distributed widely throughout southern Africa, but little is known about how they respond to the changes in land-use that have occurred in this region. This study assessed habitat preference of the two crane species across land-use categories of the self contained small scale commercial farms of 30 to 40 ha per household (A1), large scale commercial agriculture farms of > 50 ha per household (A2) and Old Resettlement, farms of < 5 ha per household with communal grazing land in Driefontein Grasslands Important Bird Area (IBA), Zimbabwe. The study further explored how selected explanatory (environmental) habitat variables influence crane species abundance. Crane bird counts and data on influencing environmental variables were collected between June and August 2012. Our results show that varying land-use categories had an influence on the abundance and distribution of the Wattled Crane (Bugeranus carunculatus) and the Grey Crowned Crane (Belearica regulorum) across Driefontein Grasslands IBA. The Wattled Crane was widely distributed in the relatively undisturbed A2 farms while the Grey Crowned Crane was associated with the more disturbed land of A1 farms, Old Resettlement and its communal grazing land. Cyperus esculentus and percent (%) bare ground were strong environmental variables best explaining the observed patterns in Wattled Crane abundance across land-use categories. The pattern in Grey Crowned Crane abundance was best explained by soil penetrability, moisture and grass height variables. A holistic sustainable land-use management that takes into account conservation of essential habitats in Driefontein Grasslands IBA is desirable for crane populations and other wetland dependent species that include water birds.

Population recovery of the Whooping Crane with emphasis on reintroduction efforts: Past and future

USGS Publications Warehouse

Ellis, D.H.; Lewis, J.C.; Gee, G.F.; Smith, D.G.

1992-01-01

The U.S. Fish and Wildlife Service (USFWS) began building a captive whooping crane (Grus americana) colony at Patuxent Wildlife Research Center (Patuxent), Maryland, in 1966. From 1976 to 1984, 73 eggs from this colony and 216 eggs from Wood Buffalo National Park (Wood Buffalo), Canada, nests were placed in sandhill crane (G. canadensis) nests at Grays Lake National Wildlife Refuge (Grays Lake), Idaho, the site of the first whooping crane reintroduction attempt. Although 84 chicks fledged from the 289 eggs, the egg transfer program has been discontinued because of inordinately high mortality (only ca. 13 birds remain in the wild in 1991) and lack of breeding in survivors. In recent decades new methods have emerged for introducing captive-produced offspring to the wild. Surrogate studies with sandhill cranes, particularly the endangered Mississippi sandhill cranes (G. c. pulla), have shown that young cranes, raised either by captive, conspecific foster parents, or by costumed humans and in close association with live cranes and lifelike crane taxidermic dummies, have high post-release survival rates. These techniques will likely be used in future whooping crane reintroduction programs. Current recovery objectives for the whooping crane include expansion of the 2 captive colonies, establishment of a third captive colony in Canada, and reintroduction of 2 additional wild populations. The Kissimmee Prairie in central Florida has been selected for the next release experiment. Evaluation of this site began in 1984, and risk assessment is expected to begin in 1992 with the transfer and monitoring of a group of captive-reared, juvenile whooping cranes. These 'tests of the environment' will, if results are favorable, be followed by a full-scale reintroduction effort of at least 20 birds/year beginning in 1994 or 1995.

Use of an inactivated eastern equine encephalitis virus vaccine in cranes

USGS Publications Warehouse

Carpenter, J.W.; Dein, F.J.; Clark, G.G.; Watts, D.M.; Crabbs, C.L.

1986-01-01

An unprecedented outbreak of fatal eastern equine encephalitis (EEE) virus occurred during the late summer and fall of 1984 in endangered whooping cranes (Grus americana) at the Patuxent Wildlife Research Center, Laurel, Maryland. As part of efforts to prevent future epizootics of EEE. studies were conducted to evaluate the antibody response of cranes following vaccination with a formalin-inactivated EEE virus vaccine. Viral specific neutralizing antibody was elicited in sandhill cranes (Grus canadensis) and whooping cranes following 1M inoculation with the vaccine. Among the 1M-inoculated cranes, peak antibody titers of 1:80 on days 30 to 60 had waned to undetectable levels by days 90 to 120. Although the initial titers were not increased by the first booster dose, the duration of the antibody was extended considerably. Whooping cranes, receiving vaccine 6 months after their first vaccination, developed titers of 1:80 to 1:320 by day 30. At 45 days after the final vaccination, these titers had dropped to 1:10 to 1:160. Cranes with preexisting EEE virus antibody, apparently reflecting natural infection, exhibited an anamnestic response indicated by a rapid increase and sustained high antibody titer. Even though EEE virus vaccine induced neutralizing antibody and produced no adverse side effects, further studies will be required to assess the significance of this response as a strategy for protecting whooping cranes against natural EEE virus infection. The loss of captive whooping cranes to the EEE virus presented a previously unrecognized risk and obstacle to recovery of this species. Not only was, there a setback in the captive breeding and reintroduction program for the whooping crane, but, because of the susceptibility of the species to the EEE virus. establishment of additional crane populations may be more complicated than initially envisioned. However, through continued surveillance, serological monitoring, and vaccination activities, we are confident that the impact of EEE virus on whooping crane recovery can be overcome to the ultimate benefit of this endangered species.

Conflicts between sandhill cranes and farmers in the western United States: evolving issues and solutions

USGS Publications Warehouse

Austin, Jane E.

2012-01-01

The main conflicts between Sandhill Cranes (Grus canadensis) and farmers in western United States occur in the Rocky Mountain region during migration and wintering periods. Most crop damage by cranes occurs in mature wheat (Triticum aestivum) and barley (Hordeum vulgare), young shoots of alfalfa (Medicago sativa) and cereal grains, chilies (Capsicum annuum), and silage corn (Zea mays). Damage is related to proximity of crop fields to roost sites and timing of crane concentrations relative to crop maturity or vulnerability. The evolution of conflicts between farmers and cranes and current solutions are described for two areas of the Rocky Mountains used by staging, migrating, or wintering cranes: Grays Lake, Idaho, and the Middle Rio Grande Valley, New Mexico. In both areas, conflicts with growing crane populations were aggravated by losses of wetlands and cropland, proximity of crops to roosts and other wetland areas, changing crop types and practices, and increasing urbanization. At Grays Lake, fall-staging cranes damaged barley fields near an important breeding refuge as well as fields 15-50 km away. In the Middle Rio Grande Valley, migrating and wintering cranes damaged young alfalfa fields, chilies, and silage corn. Solutions in both areas have been addressed through cooperative efforts among federal and state agencies, that manage wetlands and croplands to increase food availability and carrying capacity on public lands, provide hazing programs for private landowners, and strategically target crane hunting to problem areas. Sustaining the success of these programs will be challenging. Areas important to Sandhill Cranes in the western United Sates experience continued loss of habitat and food resources due to urbanization, changes in agricultural crops and practices, and water-use conflicts, which threaten the abilities of both public and private landowners to manage wetlands and croplands for cranes. Conservation of habitats and water resources are important to support crane populations and minimize future conflicts with agriculture.

Mechanism synthesis and 2-D control designs of an active three cable crane

NASA Technical Reports Server (NTRS)

Yang, Li-Farn; Mikulas, Martin M., Jr.

1992-01-01

A Lunar Crane with a suspension system based on a three cable mechanism is investigated to provide a stable end-effector for hoisting, positioning, and assembling large components during construction and servicing of a Lunar Base. The three cable suspension mechanism consists of a structural framework of three cables pointing to a common point that closely coincides with the suspended payload's center of gravity. The vibrational characteristics of this three cable suspension system are investigated by comparing a simple 2-D symmetric suspension model and a swinging pendulum in terms of their analytical natural frequency equations. A study is also made of actively controlling the dynamics of the crane using two different actuator concepts. Also, Lyapunov-based control algorithms are developed to determine two regulator-type control laws performing the system vibrational suppression for both system dynamics. Simulations including initial-valued dynamic responses as well as control performances for two different system dynamics are also presented.

46 CFR 109.521 - Cranes: General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

46 CFR 109.521 - Cranes: General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

46 CFR 109.521 - Cranes: General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

46 CFR 109.521 - Cranes: General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

46 CFR 109.521 - Cranes: General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

Mortality of globally threatened Sarus cranes Grus antigon from monocrotophos poisoning in India.

PubMed

Pain, D J; Gargi, R; Cunningham, A A; Jones, A; Prakash, V

2004-06-29

Globally threatened Sarus cranes Grus antigon are resident at Keoladeo National Park World Heritage site and the surrounding area near Bharatpur, Western Rajasthan, India. In winter, they are joined by c. 200 wintering common cranes Grus grus. On 23 November 2000, 15 Sarus cranes and three common cranes were found dead in a field adjacent to the park, where wheat seed had been sown the previous day. Chemical analyses of seed samples from the field and the cranes' alimentary tract contents identified residues of the organophosphate insecticide monocrotophos. Monocrotophos concentrations of 0.8 and 1.8 ppm were found in wheat samples, and 0.2-0.74 ppm (x=0.33) in the alimentary tract contents of five of the seven cranes examined. No other organophosphate or organochlorine pesticides were detected. We conclude that the cranes died from monocrotophos poisoning after eating treated seed. We discuss similar incidents of avian mortality, and recommend that measures be taken to reduce these. Copryright 2003 Elsevier B.V.

Promoting wildness in sandhill cranes conditioned to follow an ultralight aircraft

USGS Publications Warehouse

Duff, J.W.; Lishman, W.A.; Clark, D.A.; Gee, G.F.; Sprague, D.T.; Ellis, D.H.

2001-01-01

During the 1998 field season, we developed and tested a new protocol to teach sandhill cranes (Grus canadensis) to follow ultralight aircraft yet avoid humans. Although successful in teaching the cranes a migration route, our previous migration (1997) resulted in birds that were overly tame and sought association with humans. For this study, 16 sandhill cranes were costume-reared at USGS Patuxent Wildlife Research Center and transported to Ontario shortly before fledging. After the birds learned to follow the aircraft, 14 were transported to an isolated wintering site in South Carolina, 1300 km south of the training area. Twelve arrived safely. Eleven of 12 birds survived the winter. All of these 11 cranes moved north to Cape Hatteras in early May. Thereafter, 6 of the cranes were captured and translocated to northern New York state. The remaining 5 returned to South Carolina, autumn 1999. Prior to capture, although the cranes sometimes allowed humans to approach them, none of the cranes approached buildings or humans.

Distribution, densities, and ecology of Siberian cranes in the Khroma River region of northern Yakutia in northeastern Russia

USGS Publications Warehouse

Bysykatova, Inga P.; Krapu, Gary L.; Germogenov, Nicolai I.; Buhl, Deborah A.; Aborn, David

2014-01-01

The Siberian crane (Grus leucogeranus) is the third rarest crane species in the world with a breeding range now centered on 3 core areas and a buffer zone in the arctic of northern Yakutia in northeastern Russia. During 16 July-2 August 2009, we undertook ground surveys within the Khroma River core breeding area, surrounding buffer zone, and lands lying to the west of the known rbeeding range to estimate densities and determine habitat use and social status of Siberian cranes. A total of 142 Siberian cranes were sighted (including 55 pairs) at 54 locations with 32 cranes (including 13 pairs) sighted outside the currently known breeding range in the lower drainages of the Syalakh and Syuryuktyakh Rivers. After adjusting for a probability of detection of 0.484 (95% CI = 0.281-0.833), Siberian crane densities in the Khroma core area and the buffer zone averaged 0.0921 cranes/km2 and 0.0363 cranes/km2, respectively. A majority of cranes (n = 93 [65%]) occurred in complexes of large basin wetlands, with use centered in those having extensive beds of pendant grass (Arctophila fulva). Of the 142 cranes seen, 110 (77%) were paired, 21 (15%) were singles, and 11 (8%) were in groups of 3-5. The Khroma core supports 1 of 2 large concentrations of breeding Siberian cranes remaining in the wild; therefore, we recommend that consideration be given to designating a nature reserve that would encompass the Khroma core, adjacent buffer zone, and lands to the west (including coastal tundra areas along the lower drainages of the Syalah and Syuryuktyah Rivers). Further research is needed to gain additional insight into Siberian crane distribution and numbers on lands beyond the currently delineated western boundary of the Siberian crane breeding range in the Ust-Yana District of northern Yakutia. Important gaps remain in information needed to effectively guide conservation efforts for the Eastern Population, and recent advances in remote tracking technology offer potential opportunities to help address several key information needs.

[Population and distribution of the Siberian crane (Grus leucogeranus) wintering in the Poyang lakes over the past decade].

PubMed

Shan, Ji-Hong; Ma, Jian-Zhang; Li, Yan-Kuo; Qian, Fa-Wen; Tu, Xiao-Bin

2012-08-01

Using simultaneous land surveys, we monitored the population size and spatial distribution of wintering Siberian cranes at 64 lakes around Poyang Lake between 1998 and 2010. The results showed that 46 lakes were inhabited by wintering cranes, and in 25 of those, the number of wintering cranes accounted for more than 1% of the Siberian cranes' global population. The lakes where over 40.0% of the global population, e.g. 1 280 individuals, included Dachahu Lake in Jiujiang region, and Banghu Lake and Candouhu Lake in the Poyang Lake Nature Reserve. The average yearly population of the wintering Siberian crane in the Poyang lakes was 3 108±849, with the maximum of 4 004 individuals in winter 2002. On the whole, there was no drastic fluctuation, but population numbers have shown considerable fluctuation since 2003. We also found the Poyang Lake Nature Reserve was the major wintering area of the Siberian crane, with over 60% of Siberian cranes wintering in the reserve since 2002 (except in 2006). Most of the inhabited lakes are covered in existing nature reserves, though some lakes outside the reserve were also considerably used by Siberian cranes.

Fate of the survivors of the 1995 and 1996 Arizona trucking migrations of costume-reared greater sandhill cranes

USGS Publications Warehouse

Mummert, D.P.; Ellis, D.H.; Chambers, C.L.

2001-01-01

In 1995 and 1996, we trained 2 groups of costume-reared greater sandhill cranes (Grus canadensis tabida) (10 in 1995, 14 in 1996) to follow a truck. Thereafter we led 10 in 1995 and 12 in 1996 from Garland Prairie, northern Arizona, to the Buenos Aires National Wildlife Refuge, southern Arizona (ca. 620 km). These techniques were being developed to create additional, disjunct populations of the whooping crane (G. americana). The cranes taught the migration route in 1995 did not follow the desired migration route in 1996 but did travel north 140 km along the route in spring 1997. By the summer of 1997, we did not know the locations of any of these birds. Results were better for the 1996 tracking cranes. Between 1997 and 1999 there was a 92% (11 of 12) success rate for the 1996 trucking cranes with known locations flying unassisted from the summering to wintering grounds. Through 1999, 7 of the 12 cranes became lost on flights from the wintering to summering grounds. (Some of the trucking cranes apparently followed wild cranes to or toward breeding grounds.)

21. Photocopy of drawing (1977 structural drawing by StearnsRoger Incorporated) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Photocopy of drawing (1977 structural drawing by Stearns-Roger Incorporated) TWO-TON CAPACITY BRIDGE CRANE PLANS AND SECTIONS FOR VEHICLE SUPPORT BUILDING, SHEET 511-533 - Vandenberg Air Force Base, Space Launch Complex 3, Vehicle Support Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Glider Observations of Upper Ocean Structure in the Bay of Bengal

DTIC Science & Technology

2015-09-30

1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Glider Observations of Upper Ocean Structure in the Bay...using gliders and floats • Improve glider technology to overcome fresh, buoyant surface layers • Establish a new technology to observe turbulence...with profiling floats APPROACH We use two approaches to observe the upper ocean in the BoB. First, we deploy Spray underwater gliders to resolve

30 CFR 57.16014 - Operator-carrying overhead cranes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Operator-carrying overhead cranes. 57.16014 Section 57.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

30 CFR 56.16014 - Operator-carrying overhead cranes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Operator-carrying overhead cranes. 56.16014 Section 56.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

29 CFR 1926.1417 - Operation.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1417 Operation...) Swinging locomotive cranes. A locomotive crane must not be swung into a position where railway cars on an... applies to equipment other than tower cranes: (i) Equipment must not be operated without the counterweight...

30 CFR 56.16014 - Operator-carrying overhead cranes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Operator-carrying overhead cranes. 56.16014 Section 56.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

30 CFR 57.16014 - Operator-carrying overhead cranes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Operator-carrying overhead cranes. 57.16014 Section 57.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

Molecular Characterization of Bacterial Populations in Sandhill Crane Feces

EPA Science Inventory

Sandhill cranes have the potential to be important seasonal sources of waterborne fecal bacteria; however, it is currently not possible to measure the extent of crane fecal pollution in potentially impacted areas as there are no available crane-specific assays. This is in part d...

18. STATIC TEST TOWER VIEW FROM REMOVABLE LEVEL DOWN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. STATIC TEST TOWER - VIEW FROM REMOVABLE LEVEL DOWN TOWARDS GANTRY CRANE AND THREE TEST CELLS. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

Comparison of Serum Protein Electrophoresis Values in Wild and Captive Whooping Cranes ( Grus americana ).

PubMed

Hausmann, Jennifer C; Cray, Carolyn; Hartup, Barry K

2015-09-01

Protein electrophoresis of serum samples from endangered, wild whooping cranes ( Grus americana ) was performed to help assess the health of the only self-sustaining, migratory population in North America. Serum samples from wild adult cranes (n = 22) were taken at Aransas National Wildlife Refuge, Texas, USA during winter. Wild juvenile cranes (n = 26) were sampled at Wood Buffalo National Park, Northwest Territories, Canada, in midsummer. All captive crane samples were acquired from the International Crane Foundation, Baraboo, WI, USA. Captive adult cranes (n = 30) were sampled during annual examinations, and archived serum samples from captive juvenile cranes (n = 19) were selected to match the estimated age of wild juveniles. Wild juveniles had significantly lower concentrations of all protein fractions than wild adults, except for prealbumin and γ globulins. All protein fraction concentrations for wild juveniles were significantly lower compared with captive juveniles, except for prealbumin and γ globulins, which were higher. Wild adults had significantly greater γ globulin concentrations than captive adults. Captive juveniles had significantly lower prealbumin and albumin concentrations and albumin : globulin ratios than captive adults. The higher γ globulin concentrations in wild versus captive cranes are likely because of increased antigenic exposure and immune stimulation. Protein fraction concentrations vary significantly with age and natural history in this species. Reference intervals for serum protein electrophoresis results from captive adult whooping cranes are provided in this study.

The influence of diet composition upon growth and development of sandhill cranes

USGS Publications Warehouse

Serafin, J.A.

1982-01-01

Experiments were conducted to evaluate the effect of protein, metabolizable energy, and sulfur amino acid content of five diets upon growth and development of captive Florida Sandhill Crane (Grus canadensis pratensis) and Greater Sandhill Crane (G. c. tabida) chicks raised under controlled conditions. A high protein (32%) diet resulted in faster growth than that obtained when a lower protein (24%) ration was supplied. Florida Sandhill Crane chicks fed a diet containing 2,160 kcal/kg grew significantly slower than chicks fed a ration containing 2,830 kcal/kg. Reducing the sulfur amino acid content of a ration containing 24% protein from 0.88% to 0.73% significantly slowed the growth of young cranes. A 17% incidence of leg disorders and a 25% incidence of wing abnormalities occurred between 7 and 28 days of age among Greater Sandhill Cranes fed a high protein diet. Florida Sandhill Cranes grew slower than Greater Sandhill Cranes irrespective of the type of ration they were provided and did not develop leg or wing abnormalities. Abnormalities invariably developed only in the most rapidly growing Greater Sandhill Cranes. Diets that promoted slower growth reduced the incidence of abnormalities. A ration formulated to contain a low (0.73%) sulfur amino acid level appeared to be the most suitable for slowing growth rates of captive-reared Sandhill Cranes and reducing the risk of abnormaiwing or leg development.

46 CFR 109.525 - Cranes: Working loads.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

46 CFR 109.525 - Cranes: Working loads.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

46 CFR 109.525 - Cranes: Working loads.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

46 CFR 109.525 - Cranes: Working loads.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

46 CFR 109.525 - Cranes: Working loads.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

33 CFR 150.555 - How must cranes be maintained?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false How must cranes be maintained? 150.555 Section 150.555 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Operations § 150.555 How must cranes be maintained? Cranes must be operated, maintained, and tested in...

29 CFR 1926.1419 - Signals-general requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in... person may give signals to a crane/derrick at a time, except in circumstances covered by paragraph (j) of... multiple cranes/derricks. Where a signal person(s) is in communication with more than one crane/derrick, a...

29 CFR 1926.1440 - Sideboom cranes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 8 2011-07-01 2011-07-01 false Sideboom cranes. 1926.1440 Section 1926.1440 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1440 Sideboom cranes. (a) The provisions of this standard apply, except § 1926.1402 (Ground conditions), § 1926...

46 CFR 109.439 - Crane certificates.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Crane certificates. 109.439 Section 109.439 Shipping... Reports, Notifications, and Records Records § 109.439 Crane certificates. The master or person in charge shall insure that the following certificates and records for each crane are maintained on the unit: (a...

78 FR 36572 - Certain Crawler Cranes and Components Thereof Notice of Receipt of Complaint; Solicitation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

... INTERNATIONAL TRADE COMMISSION [Docket No. 2960] Certain Crawler Cranes and Components Thereof... Trade Commission has received a complaint entitled Certain Crawler Cranes and Components Thereof, DN...) of the Commission's Rules of Practice and Procedure filed on behalf of Manitowoc Cranes, LLC on June...

33 CFR 150.555 - How must cranes be maintained?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How must cranes be maintained? 150.555 Section 150.555 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Operations § 150.555 How must cranes be maintained? Cranes must be operated, maintained, and tested in...

46 CFR 109.439 - Crane certificates.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Crane certificates. 109.439 Section 109.439 Shipping... Reports, Notifications, and Records Records § 109.439 Crane certificates. The master or person in charge shall insure that the following certificates and records for each crane are maintained on the unit: (a...

Development and Evaluation of a Quantitative PCR Assay Targeting Sandhill Crane (Grus canadensis) Fecal Pollution

EPA Science Inventory

While the microbial water quality in the Platte River is seasonally impacted by excreta from migrating cranes, there are no methods available to study crane fecal contamination. Here we characterized microbial populations in crane feces using phylogenetic analysis of 16S rRNA gen...

29 CFR 1918.55 - Cranes (See also § 1918.11).

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Operator's station. (1) Cranes with missing, broken, cracked, scratched, or dirty glass (or equivalent... shall not be used except in an emergency or during non-cargo handling operations such as stowing cranes... shall not be used if control levers operate with excessive friction or excessive play. (6) When cranes...

46 CFR 109.437 - Crane record book.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

46 CFR 109.437 - Crane record book.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

46 CFR 109.437 - Crane record book.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

46 CFR 109.437 - Crane record book.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

46 CFR 109.437 - Crane record book.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

Beyond night float? The impact of call structure on internal medicine residents.

PubMed

Rosenberg, M; McNulty, D

1995-02-01

Limitation of resident working hours has been a critical issue for training programs in recent years. At Providence Medical Center, residents and faculty collaborated in developing goals, implementation strategies, and an evaluation process for a new ward float system. The goals of the float system were to reduce fatigue, facilitate education, maintain continuity of care, and minimize the negative impact of training on residents' personal lives. Evaluation revealed: 1) 74% of the residents preferred Providence Medical Center float system (PMCF) to either night float (NF) (13%) or standard every-fourth-night call (EFNC) (13%); and 2) PMCF was perceived to ensure quality patient care to a greater degree than was NF, to better facilitate resident education than was NF, and to have a less negative impact on personal lives than was EFNC.

Experimental and Numerical Investigations of Floating Breakwater Performance.

USDA-ARS?s Scientific Manuscript database

Floating breakwaters are commonly used to protect small marinas and for shoreline erosion control in coastal areas. They are efficient wave attenuation structures for relatively short waves and shallow water depths. The main objective of the current study is to investigate the hydrodynamic interacti...

Spring migration ecology of the mid-continent sandhill crane population with an emphasis on use of the Central Platte River Valley, Nebraska

USGS Publications Warehouse

Krapu, Gary L.; Brandt, David A.; Kinzel, Paul J.; Pearse, Aaron T.

2014-01-01

We conducted a 10-year study (1998–2007) of the Mid-Continent Population (MCP) of sandhill cranes (Grus canadensis) to identify spring-migration corridors, locations of major stopovers, and migration chronology by crane breeding affiliation (western Alaska–Siberia [WA–S], northern Canada–Nunavut [NC–N], west-central Canada–Alaska [WC–A], and east-central Canada–Minnesota [EC–M]). In the Central Platte River Valley (CPRV) of Nebraska, we evaluated factors influencing staging chronology, food habits, fat storage, and habitat use of sandhill cranes. We compared our findings to results from the Platte River Ecology Study conducted during 1978–1980. We determined spring migration corridors used by the breeding affiliations (designated subpopulations for management purposes) by monitoring 169 cranes marked with platform transmitter terminals (PTTs). We also marked and monitored 456 cranes in the CPRV with very high frequency (VHF) transmitters to evaluate length and pattern of stay, habitat use, and movements. An estimated 42% and 58% of cranes staging in the CPRV were greater sandhill cranes (G. c. tabida) and lesser sandhill cranes (G. c. canadensis), and they stayed for an average of 20 and 25 days (2000–2007), respectively. Cranes from the WA–S, NC–N, WC–A, and EC–M affiliations spent an average of 72, 77, 52, and 53 days, respectively, in spring migration of which 28, 23, 24, and 18 days occurred in the CPRV. The majority of the WA–S subpopulation settled in the CPRV apparently because of inadequate habitat to support more birds upstream, although WA–S cranes accounted for >90% of birds staging in the North Platte River Valley. Crane staging duration in the CPRV was negatively correlated with arrival dates; 92% of cranes stayed >7 days. A program of annual mechanical removal of mature stands of woody growth and seedlings that began in the early 1980s primarily in the main channel of the Platte River has allowed distribution of crane roosts to remain relatively stable over the past 2 decades. Most cranes returned to nocturnal roost sites used in previous years. Corn residues dominated the diet of sandhill cranes in the CPRV, as in the 1970s, despite a marked decline in standing crop of corn residues. Only 14% (10 of 74) of PTT-marked migrant cranes stayed at stopovers for ≥5 days before arriving in the CPRV, which limited the contribution of sites south of the CPRV for fat accumulation needed for migration and reproduction. Body masses of cranes (after adjusting for body size [an index of fat]) at arrival in the CPRV varied widely among years (1998–2006), indicating the importance of maintaining productive habitats on the wintering grounds to condition cranes for migration and reproduction. Average rates of fat gain by adult females while in the CPRV remained similar from 1978–1979 to 1998–1999 but declined among males. Distances cranes flew to feeding grounds in the CPRV increased as the percentage of cropland planted to soybeans increased and as density of cranes on nocturnal roosts increased. These results suggest that as habitats of limited or no value to cranes increase on the landscape, more flight time and higher maintenance costs may reduce fat storage. An estimated 40% of diurnal use occurred north of Interstate 80 (I-80) where ≤5% of lands dedicated to crane conservation are located. Seventy-four and 40% of PTT-marked EC–M and WC–A cranes had spring migrations that included staging in eastern South Dakota for an average of 11 and 10 days, respectively. Cranes of the NC–N, WA–S, and WC–A subpopulations staged an average of 25, 17, and 12 days in central and western Saskatchewan/eastern Alberta. Females in these affiliations increased their fat reserves after leaving Nebraska by an estimated 450, 451, and 452 g, respectively, underscoring the key role of these staging areas in preparing the 3 subpopulations for reproduction. After departing Nebraska, MCP cranes roosted primarily in basin wetlands. Most of these wetlands are in private ownership and lack adequate protection, emphasizing the need for effective laws and policies to ensure their long-term protection. The continued success of the current management goal of maintaining the MCP at approximately its current size and providing diverse recreational opportunities over a wide area of midcontinent and western North America is predicated on the ability of MCP cranes to continue to store large fat reserves in the CPRV in advance of breeding. For the CPRV to remain a key fat storage site, active channel maintenance (e.g., clearing of woody vegetation) likely will need to continue, along with establishing minimum stream flows. These actions would help ensure nocturnal roosting habitat remains sufficiently dispersed to provide cranes with daily intake of high-energy food adequate for major fat storage and limit risk of high mortality from storms and disease. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Molecular characterization of crane Coccidia, Eimeria gruis and E. reichenowi, found in feces of migratory cranes.

PubMed

Matsubayashi, Makoto; Takami, Kazutoshi; Abe, Niichiro; Kimata, Isao; Tani, Hiroyuki; Sasai, Kazumi; Baba, Eiichiroh

2005-08-01

Eimeria gruis and E. reichenowi have lethal pathogenicity to a number of species of cranes. These parasites develop at multiple organs or tissues in infected cranes, thus lacking the specificity of infection sites shown by other Eimeria spp. in spite of morphologic similarity. To date, there have been many reports of crane Eimeria infections, however, genetic examinations of these parasites have never been published. In the present study, we isolated oocysts of E. gruis and E. reichenowi from crane feces at a wintering area in Japan. By phylogenic analysis, we first demonstrated that partial sequences of the isolates formed their own cluster, located separately from other Eimeria spp.

A fuzzy-logic antiswing controller for three-dimensional overhead cranes.

PubMed

Cho, Sung-Kun; Lee, Ho-Hoon

2002-04-01

In this paper, a new fuzzy antiswing control scheme is proposed for a three-dimensional overhead crane. The proposed control consists of a position servo control and a fuzzy-logic control. The position servo control is used to control crane position and rope length, and the fuzzy-logic control is used to suppress load swing. The proposed control guarantees not only prompt suppression of load swing but also accurate control of crane position and rope length for simultaneous travel, traverse, and hoisting motions of the crane. Furthermore, the proposed control provides practical gain tuning criteria for easy application. The effectiveness of the proposed control is shown by experiments with a three-dimensional prototype overhead crane.

Infectious and parasitic diseases of cranes: Principles of treatment and prevention

USGS Publications Warehouse

Carpenter, James W.; Derrickson, Scott R.; Archibald, George W.; Pasquier, Roger F.

1987-01-01

Little is known of the incidence and pathogenic effects of infectious and parasitic diseases in the world's 15 crane species. in addition to being a primary cause of crane morality, diseases increase the susceptibility of an animal to depredation, malnutrition, accidents, and other mortality factors and reduces its chances of survival during times of stress. Although the treatment and control of diseases of wild cranes is difficult, the management of captive cranes is becoming more and more successful through the use of intensive husbandry, preventative medicine, and parasite control programs. this paper describes some of the infectious and parasitic diseases of wild and captive cranes and outlines management principles for their control, especially in confinement.

Structural analysis and design for the development of floating photovoltaic energy generation system

NASA Astrophysics Data System (ADS)

Yoon, S. J.; Joo, H. J.; Kim, S. H.

2018-06-01

In this paper, we discussed the structural analysis and design for the development of floating photovoltaic energy generation system. Series of research conducted to develop the system from the analysis and design of the structural system to the installation of the system discussed. In the structural system supporting solar panels PFRP materials and SMC FRP materials used. A unit module structure is fabricated and then the unit module structures are connected each other to assemble whole PV energy generation complex. This system connected directly to the power grid system. In addition, extensive monitoring for the efficiency of electricity generation and the soundness of the structural system is in progress for the further system enhancement.

Feeding ecology of sandhill cranes during spring migration in Nebraska

USGS Publications Warehouse

Reinecke, K.J.; Krapu, G.L.

1986-01-01

We studied the food habits of midcontinent sandhill cranes (Grus canadensis) during spring 1978 and 1979 at their primary staging area along the Platte River and compared population food and foraging habitat requirements with availability. Crane diets varied among the 3 principal foraging habitats, but not between sexes, ages, or years. Cranes feeding in cornfields ate >99% corn (total dry wt); those feeding in native grasslands and alfalfa fields consumed 79-99% invertebrates. The composite diet of cranes was 97% corn and 3% invertebrates, including 2% earthworms, 0.5% snails, and 0.5% insects. Presumably, corn provided energy, whereas invertebrates from grasslands and alfalfa fields provided supplemental nutrients to compensate for protein and calcium deficiencies in corn. The mean density of waste corn decreased (P 50%. Management by burning, haying, and grazing is compatible with crane use of grasslands, and reduced-till farming could benefit cranes by increasing invertebrate populations.

Fatal injuries in the United States construction industry involving cranes 1984-1994.

PubMed

Suruda, A; Liu, D; Egger, M; Lillquist, D

1999-12-01

There is little published information concerning the epidemiology of injuries in the construction industry involving cranes other than for electrical injury from power line contact. For the 11-year period of 1984 through 1994, the US Occupational Safety and Health Administration (OSHA) investigated 502 deaths in 479 incidents involving cranes in the construction industry. Electrocution was the largest category, with 198 deaths (39%) reported. Other major categories were assembly/dismantling (58 deaths, 12%), boom buckling (41 deaths, 8%), crane upset/overturn (37 deaths, 7%), and rigging failure (36 deaths, 7%). The majority of the deaths during assembly/dismantling involved removal of the boom pins from lattice boom cranes. Only 34% of the construction firms employing the fatally injured workers had ever been inspected by OSHA. OSHA cited the employer for safety violations in 436 deaths (83%). Additional worker training, increased OSHA inspections, and crane inspection programs could prevent many crane-related deaths.

Origin of three Red-crowned Cranes Grus japonensis found in northeast Honshu and west Hokkaido, Japan, from 2008 to 2012.

PubMed

Miura, Yoshiaki; Shiraishi, Junya; Shiomi, Akira; Kitazawa, Takio; Hiraga, Takeo; Matsumoto, Fumio; Teraoka, Hiroki; Masatomi, Hiroyuki

2013-01-01

The Red-crowned Crane Grus japonensis is an endangered species that has two separate breeding populations, one in the Amur River basin and the other in north and east Hokkaido, Japan. So far, only two (Gj1 and Gj2) and seven (Gj3-Gj9) haplotypes in D-loop of mtDNA were identified in Japan and in the continent, respectively. We obtained feathers from three cranes found in northeast Honshu. The crane in Akita in 2008, which also arrived at west Hokkaido, had a novel haplotype (Gj10). Another crane in Akita in 2009 showed a heteroplasmy (Gj7 and a novel type, Gj12). The third crane in Miyagi in 2010 also showed another type, Gj11. These results suggest that three Red-crowned Cranes appeared in Honshu and west Hokkaido were from the continent.

Hydrological Modelling for Siberian Crane Grus Leucogeranus Stopover Sites in Northeast China

PubMed Central

Jiang, Haibo; He, Chunguang; Sheng, Lianxi; Tang, Zhanhui; Wen, Yang; Yan, Tingting; Zou, Changlin

2015-01-01

Habitat loss is one of the key factors underlying the decline of many waterbird species, including Siberian Crane (Grus leucogeranus), a threatened species worldwide. Wetlands are the primary stopover for many waterbirds and restoration of these wetlands involves both hydrological restoration and water resource management. To protect the stopover sites of Siberian Cranes, we collected Siberian Crane stopover numbers, meteorological and hydrological data, and remote sensing data from 2008 to 2011 in Momoge National Nature Reserve, one of the largest wetlands in northeastern China. A model was developed to estimate the suitability of Siberian Crane stopover sites. According to our results, the most suitable daily water level for Siberian Cranes between 2008 and 2012 occurred in the spring of 2008 and in the Scirpus planiculmis growing season and autumn of 2010. We suggest a season-dependent water management strategy in order to provide suitable conditions at Siberian Crane stopover sites. PMID:25874552

77 FR 49741 - Cranes and Derricks in Construction: Demolition and Underground Construction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... Analysis When it issued the final cranes rule, OSHA prepared a final economic analysis (FEA) as required by... construction and cranes engaged in construction work involving demolition. The FEA for the final cranes..., found that the requirements of the rule were technologically and economically feasible. Because the FEA...

50 CFR 20.106 - Seasons, limits, and shooting hours for sandhill cranes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... sandhill cranes. 20.106 Section 20.106 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE..., and Shooting Hours Schedules § 20.106 Seasons, limits, and shooting hours for sandhill cranes. This section provides for the annual hunting of sandhill cranes in designated portions of the 48 contiguous...

75 FR 56487 - Airworthiness Directives; Erickson Air-Crane Incorporated Model S-64F Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

...-0909; Directorate Identifier 2010-SW-026-AD] RIN 2120-AA64 Airworthiness Directives; Erickson Air-Crane... rulemaking (NPRM). SUMMARY: This document proposes adopting a new airworthiness directive (AD) for Erickson Air-Crane Incorporated (Erickson Air-Crane) Model S- 64F helicopters. The AD would require, at...

76 FR 16764 - Crane & Company; Notice of Application Tendered for Filing With the Commission and Soliciting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13583-001] Crane & Company... c. Date filed: March 9, 2011 d. Applicant: Crane & Company e. Name of Project: Byron Weston... connected to the Crane & Company mill complex. The proposed project is estimated to generate an average of...

75 FR 68429 - Cranes and Derricks in Construction; Approval of Information Collection Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

.... OSHA-2007-0066] RIN 1218-AC01 Cranes and Derricks in Construction; Approval of Information Collection... requirements. SUMMARY: On August 9, 2010, OSHA published a final rule revising the Cranes and Derricks Standard... necessary to protect employees during the use of cranes and derricks in construction. That final standard...

75 FR 20005 - Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

...] Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget's (OMB... Crawler, Locomotive, and Truck Cranes Standard (29 CFR 1910.180). DATES: Comments must be submitted... of each of these requirements is to prevent workers from using unsafe cranes and ropes, thereby...

75 FR 58373 - Notice of Intent To Grant Exclusive Patent License; DQE, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

... objections are to be filed with Naval Surface Warfare Center, Crane Division, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Division, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001, telephone 812-854...

76 FR 55893 - Crane & Company; Notice of Application Accepted for Filing With the Commission, Intent To Waive...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13583-001] Crane & Company.... Date filed: March 9, 2011. d. Applicant: Crane & Company. e. Name of Project: Byron Weston... new 100-foot-long, 600-volt transmission line connected to the Crane & Company mill complex. The...

77 FR 14508 - Notice of Availability of Government-Owned Inventions; Available for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

... launching device). ADDRESSES: Written objections are to be filed with Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN...

50 CFR 20.106 - Seasons, limits, and shooting hours for sandhill cranes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... sandhill cranes. 20.106 Section 20.106 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE..., and Shooting Hours Schedules § 20.106 Seasons, limits, and shooting hours for sandhill cranes. This section provides for the annual hunting of sandhill cranes in designated portions of the 48 contiguous...

76 FR 75450 - Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-02

...-AA00 Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC AGENCY: Coast... moving safety zone around a barge transporting two container cranes on the Cooper and Wando Rivers during... from hazards associated with transporting the large cranes by barge. Persons and vessels are prohibited...

77 FR 5242 - Notice of Availability of Government-Owned Invention; Available for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

... weapon mount). ADDRESSES: Written objections are to be filed with Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN...

29 CFR 1910.180 - Crawler locomotive and truck cranes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

29 CFR 1910.180 - Crawler locomotive and truck cranes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

29 CFR 1910.180 - Crawler locomotive and truck cranes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

29 CFR 1910.180 - Crawler locomotive and truck cranes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

29 CFR 1910.180 - Crawler locomotive and truck cranes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

Terminator assembly for a floating structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiu, H.; Hall, J.E.

1987-10-20

A terminator assembly is described for use in mooring a floating surface to the floor of a body of water. The floating structure has has an upper support and a lower support, comprising: a hawsepipe extending downwardly from adjacent the upper support and supported by the lower support, a tension member extending downwardly from adjacent the upper support through the hawsepipe and the lower support. The tension member has a lower end adapted for connection to the floor of the body of water. Locking means connected to an upper portion of the tension member for maintaining the tension member inmore » tension by acting upon an upper portion of the hawsepipe without transferring primary tension load forces to the upper support.« less

Head-bobbing behavior in walking whooping cranes (Grus americana) and sandhill cranes (Grus canadensis)

USGS Publications Warehouse

Cronin, Thomas W.; Kinloch, Matthew R.; Olsen, Glenn H.

2007-01-01

Head-bobbing is a common and characteristic behavior of walking birds. While the activity could have a relatively minor biomechanical function, for balance and stabilization of gait, head-bobbing is thought to be primarily a visual behavior in which fixation of gaze alternates with a forward movement that generates visual flow. We studied head-bobbing in locomoting whooping cranes (Grus americana) and sandhill cranes (Grus canadensis), using food strewn on the ground to motivate them to walk or run. When the cranes walked, head-bobbing proceeded in a four-step sequence that was closely linked to the stepping cycle. The time available for gaze stabilization decreased with travel speed, and running cranes did not head-bob at all. As a crane extended its bill towards the ground for food, it also exhibited a series of short head-bobs that were not associated with forward travel. Head-bobbing is a flexible behavior that varies with gait and with visual search, most notably as the cranes prepare to strike with the bill.

Isolation of a sex-linked DNA sequence in cranes.

PubMed

Duan, W; Fuerst, P A

2001-01-01

A female-specific DNA fragment (CSL-W; crane sex-linked DNA on W chromosome) was cloned from female whooping cranes (Grus americana). From the nucleotide sequence of CSL-W, a set of polymerase chain reaction (PCR) primers was identified which amplify a 227-230 bp female-specific fragment from all existing crane species and some other noncrane species. A duplicated versions of the DNA segment, which is found to have a larger size (231-235 bp) than CSL-W in both sexes, was also identified, and was designated CSL-NW (crane sex-linked DNA on non-W chromosome). The nucleotide similarity between the sequences of CSL-W and CSL-NW from whooping cranes was 86.3%. The CSL primers do not amplify any sequence from mammalian DNA, limiting the potential for contamination from human sources. Using the CSL primers in combination with a quick DNA extraction method allows the noninvasive identification of crane gender in less than 10 h. A test of the methodology was carried out on fully developed body feathers from 18 captive cranes and resulted in 100% successful identification.

Vitamin E in cranes: reference ranges and nutrient interactions

USGS Publications Warehouse

Dierenfeld, Ellen S.; Sheppard, C.D.; Langenberg, J.; Mirande, C.; Spratt, J.; Dein, F.J.

1993-01-01

Fat soluble vitamins E and A (quantified as alpha-tocopherol and all-trans retinol, respectively) were measured in plasma samples from 274 captive cranes from four institutions and five free-ranging birds. Ages ranged from 4 mo to 80 yr, and all 15 crane species were represented. Captive cranes had a mean +/- standard error (SE) of 6.57 +/- 0.82 micrograms/ml alpha-tocopherol; migrating greater sandhill cranes (Grus canadenis tabida) had a plasma concentration of 3.71 +/- 0.22 micrograms/ml. Sex and age differences were not significant, but crane species that evolved in temperate habitats had higher circulating levels of alpha-tocopherol than tropical or subtropical species. Mean +/- SE retinol values were 0.69 +/- 0.05 micrograms/ml in captive cranes, and 0.66 +/- 0.08 micrograms/ml in free-ranging cranes; values did not differ significantly by sex, age, or species. Dietary vitamin E concentrations were significantly correlated with plasma alpha-tocopherol levels in a logarithmic relationship. Dietary selenium at 0.5 mg/kg was associated with decreased circulating alpha-tocopherol concentrations.

Seasonal movements and multiscale habitat selection of Whooping Crane (Grus americana) in natural and agricultural wetlands

USGS Publications Warehouse

Pickens, Bradley A.; King, Sammy L.; Vasseur, Phillip L.; Zimorski, Sara E.; Selman, Will

2017-01-01

Eleven of 15 species of cranes (family: Gruidae) are considered vulnerable or endangered, and the increase of agriculture and aquaculture at the expense of natural wetlands and grasslands is a threat to Gruidae worldwide. A reintroduced population of Whooping Crane (Grus americana) was studied in coastal and agricultural wetlands of Louisiana and Texas, USA. The objectives were to compare Whooping Crane movements across seasons, quantify multiscale habitat selection, and identify seasonal shifts in selection. Whooping Cranes (n = 53) were tracked with satellite transmitters to estimate seasonal core-use areas (50% home range contours) via Brownian bridge movement models and assess habitat selection. Whooping Crane core-use areas (n = 283) ranged from 4.7 to 438.0 km2, and habitat selection changed seasonally as shallow water availability varied. Whooping Crane core-use areas were composed of more fresh marsh in spring/summer, but shifted towards rice and crawfish (Procambarus spp.) aquaculture in the fall/winter. Within core-use areas, aquaculture was most strongly selected, particularly in fall when fresh marsh became unsuitable. Overall, the shifting of Whooping Crane habitat selection over seasons is likely to require large, heterogeneous areas. Whooping Crane use of agricultural and natural wetlands may depend on spatio-temporal dynamics of water depth.

Habitat preferences and conservation threats to Black-necked Cranes wintering in Bhutan.

PubMed

Namgay, Rinchen; Wangchuk, Sangay

2016-01-01

Black-necked Crane (Grus nigricollis) is a vulnerable Red list species whose populations are declining. However, little is known about Black-necked Cranes' habitat requirements or the causes of their population decline. We identified Black-necked Cranes' winter roost and foraging preferences of Black-necked Cranes in Bhutan during the winter of 2013-2014. Black-necked Cranes' roosts were recorded using Garmin GPSmap 60CSx, while foraging preferences and threats to the birds were identified based on a survey of household heads (n = 107) residing within a 3 km radius of roost sites. We grouped the threats identified by the communities into four major categories, viz. biological, social, political and natural threats based on the relevance. Of the four major threats, communities residing within the roosting and foraging habitat of the Black-necked Crane reported biological threat as major. Biological threats as reported by communities include loss of habitat, food shortage and competition from other animals. We recommend the present roosting areas be designated as part of the conservation areas for Black-necked Crane wintering in Bumthang district. In addition to preserving these areas, government should also encourage farming in foraging habitats of Black-necked Crane, because they mainly feed on barley, wheat, paddy, potatoes and buckwheat, besides roots, tubers and insects in the wetlands.

Crane cabins' interior space multivariate anthropometric modeling.

PubMed

Essdai, Ahmed; Spasojević Brkić, Vesna K; Golubović, Tamara; Brkić, Aleksandar; Popović, Vladimir

2018-01-01

Previous research has shown that today's crane cabins fail to meet the needs of a large proportion of operators. Performance and financial losses and effects on safety should not be overlooked as well. The first aim of this survey is to model the crane cabin interior space using up-to-date crane operator anthropometric data and to compare the multivariate and univariate method anthropometric models. The second aim of the paper is to define the crane cabin interior space dimensions that enable anthropometric convenience. To facilitate the cabin design, the anthropometric dimensions of 64 crane operators in the first sample and 19 more in the second sample were collected in Serbia. The multivariate anthropometric models, spanning 95% of the population on the basis of a set of 8 anthropometric dimensions, have been developed. The percentile method was also used on the same set of data. The dimensions of the interior space, necessary for the accommodation of the crane operator, are 1174×1080×1865 mm. The percentiles results for the 5th and 95th model are within the obtained dimensions. The results of this study may prove useful to crane cabin designers in eliminating anthropometric inconsistencies and improving the health of operators, but can also aid in improving the safety, performance and financial results of the companies where crane cabins operate.

Hardware math for the 6502 microprocessor

NASA Technical Reports Server (NTRS)

Kissel, R.; Currie, J.

1985-01-01

A floating-point arithmetic unit is described which is being used in the Ground Facility of Large Space Structures Control Verification (GF/LSSCV). The experiment uses two complete inertial measurement units and a set of three gimbal torquers in a closed loop to control the structural vibrations in a flexible test article (beam). A 6502 (8-bit) microprocessor controls four AMD 9511A floating-point arithmetic units to do all the computation in 20 milliseconds.

Free-floating magnetic microstructures by mask photolithography

NASA Astrophysics Data System (ADS)

Huong Au, Thi; Thien Trinh, Duc; Bich Do, Danh; Phu Nguyen, Dang; Cong Tong, Quang; Diep Lai, Ngoc

2018-03-01

This work explores the fabrication of free-floating magnetic structures on a photocurable nanocomposite consisting of superparamagnetic magnetite nanoparticles (Fe3O4) and a commercial SU-8 negative tone photoresist. The nanocomposite was synthesized by mixing magnetic nanoparticles with different kinds of SU-8 resin. We demonstrated that the dispersion of Fe3O4 nanoparticles in nanocomposite solution strongly depended on the particles concentration, the viscosity of SU-8 polymer, and the mixing time. The influence of these factors was demonstrated by examining the structures fabricated by mask photolithography technique. We obtained the best quality of structures at a low concentration, below 5 wt%, of Fe3O4 nanoparticles in SU-8 2005 photoresist for a mixing time of about 20 days. The manipulation of free-floating magnetic microstructures by an external magnetic field was also demonstrated showing promising applications of this magnetic nanocomposite.

Techniques for rearing and releasing nonmigratory cranes: Lessons from the Mississippi Sandhill Crane program

USGS Publications Warehouse

Ellis, D.H.; Olsen, Glenn H.; Gee, G.F.; Nicolich, Jane M.; O'Malley, K.E.; Nagendran, Meenakshi; Hereford, Scott G.; Range, P.; Harper, W.T.; Ingram, R.P.; Smith, D.G.

1992-01-01

Captive-reared Mississippi sandhill cranes (Grus canadensis pulla) reared at the Patuxent Wildlife Research Center (Patuxent) have been released at the Mississippi Sandhill Crane National Wildlife Refuge (MSCNWR) since 1981. Of 131 birds released through December 1990, 103 were reared by foster parents. The remaining 28 were experimentally hand-reared in 1989 and 1990. After refining release procedures, parent-reared birds have integrated into the wild flock, many have survived, and some have bred. Releases of hand-reared cranes elsewhere in the 1970's were largely unsuccessful, at least in part due to the lack of a lengthy acclimation period. A new hand-rearing protocol holds promise in producing release-worthy birds. The technique employs some features first used in the 1960's (e.g., a costume for the human caretaker and model crane heads used to train chicks to feed). In the mid-1980's, the following features were added: (1) the costumed caretaker was given a visor and feathers, (2) a taxidermic crane head or a hand puppet was held or suspended from the ceiling for use in stimulating chicks to feed, (3) a taxidermic mount of a brooding crane supplied warmth, (4) a full-sized live crane was maintained in an adjacent pen and in visual contact with neonatal young to provide an imprinting model, and (5) a small group of adult (or subadult) cranes was penned adjacent to the outdoor chick pens to provide socialization models. Recent releases of Mississippi sandhill cranes hand-reared according to this protocol and released in Mississippi have had high first-year survival rates. The now-operational technique holds promise for producing large numbers of release-worthy birds.

Varying Land-Use Has an Influence on Wattled and Grey Crowned Cranes’ Abundance and Distribution in Driefontein Grasslands Important Bird Area, Zimbabwe

PubMed Central

Fakarayi, Togarasei; Mashapa, Clayton; Gandiwa, Edson; Kativu, Shakkie

2016-01-01

Three species of cranes are distributed widely throughout southern Africa, but little is known about how they respond to the changes in land-use that have occurred in this region. This study assessed habitat preference of the two crane species across land-use categories of the self contained small scale commercial farms of 30 to 40 ha per household (A1), large scale commercial agriculture farms of > 50 ha per household (A2) and Old Resettlement, farms of < 5 ha per household with communal grazing land in Driefontein Grasslands Important Bird Area (IBA), Zimbabwe. The study further explored how selected explanatory (environmental) habitat variables influence crane species abundance. Crane bird counts and data on influencing environmental variables were collected between June and August 2012. Our results show that varying land-use categories had an influence on the abundance and distribution of the Wattled Crane (Bugeranus carunculatus) and the Grey Crowned Crane (Belearica regulorum) across Driefontein Grasslands IBA. The Wattled Crane was widely distributed in the relatively undisturbed A2 farms while the Grey Crowned Crane was associated with the more disturbed land of A1 farms, Old Resettlement and its communal grazing land. Cyperus esculentus and percent (%) bare ground were strong environmental variables best explaining the observed patterns in Wattled Crane abundance across land-use categories. The pattern in Grey Crowned Crane abundance was best explained by soil penetrability, moisture and grass height variables. A holistic sustainable land-use management that takes into account conservation of essential habitats in Driefontein Grasslands IBA is desirable for crane populations and other wetland dependent species that include water birds. PMID:27875552

Distribution and migration chronology of Eastern population sandhill cranes

USGS Publications Warehouse

Fronczak, David L.; Andersen, David; Hanna, Everett E.; Cooper, Thomas R.

2017-01-01

The Eastern Population (EP) of greater sandhill cranes (Antigone canadensis tabida; cranes) is expanding in size and geographic range. Little information exists regarding the geographic extent of breeding, migration, and wintering ranges, migration chronology, or use of staging areas for cranes in the EP. To obtain these data, we attached solar global positioning system (GPS) platform transmitting terminals (PTTs) to 42 sandhill cranes and monitored daily locations from December 2009 through August 2014. On average, tagged cranes settled in summer areas during late‐March in Minnesota (7%), Wisconsin (29%), Michigan, USA (21%), and Ontario, Canada (38%) and arrived at their winter terminus beginning mid‐December in Indiana (15%), Kentucky (3%), Tennessee (45%), Georgia (5%), and Florida (32%). Cranes initiated spring migration beginning mid‐February to their respective summer areas on routes similar to those used during fall migration. Twenty‐five marked cranes returned to the same summer area after a second spring migration, of which 19 (76%) settled <3 km from the estimated mean center of the summer area of the previous year. During the 2010–2012 United States Fish and Wildlife Service (USFWS) Cooperative Fall Abundance Survey for cranes in the EP, we estimated that approximately 29–31% of cranes that summered in both Wisconsin and the Lower Peninsula of Michigan were not in areas included in the survey. The information we collected on crane movements provides insight into distribution and migration chronology that will aid in assessment of the current USFWS fall survey. In addition, information on specific use sites can assist state and federal managers to identify and protect key staging and winter areas particularly during current and future recreational harvest seasons.

Location and agricultural practices influence spring use of harvested cornfields by cranes and geese in Nebraska

USGS Publications Warehouse

Anteau, Michael J.; Sherfy, Mark H.; Bishop, Andrew A.

2011-01-01

Millions of ducks, geese, and sandhill cranes (Grus canadensis; hereafter cranes) stop in the Central Platte River Valley (CPRV) of Nebraska to store nutrients for migration and reproduction by consuming corn remaining in fields after harvest. We examined factors that influence use of cornfields by cranes and geese (all mid-continent species combined; e.g., Anser, Chen, and Branta spp.) because it is a key step to efficient conservation planning aimed at ensuring that adequate food resources are available to migratory birds stopping in the CPRV. Distance to night-time roost site, segment of the CPRV (west to east), and agricultural practices (post-harvest treatment of cornfields: idle, grazed, mulched, mulched and grazed, and tilled) were the most important and influential variables in our models for geese and cranes. Probability of cornfield use by geese and cranes decreased with increasing distance from the closest potential roosting site. The use of cornfields by geese increased with the density of corn present there during the early migration period, but field use by cranes appeared not to be influenced by early migration corn density. However, probability of cornfield use by cranes did increase with the amount of wet grassland habitat within 4.8 km of the field. Geese were most likely to use fields that were tilled and least likely to use fields that were mulched and grazed. Cranes were most likely to use fields that were mulched and least likely to use fields that were tilled, but grazing appeared not to influence the likelihood of field use by cranes. Geese were more likely to use cornfields in western segments of the CPRV, but cranes were more likely to use cornfields in eastern segments. Our data suggest that managers could favor crane use of fields and reduce direct competition with geese by reducing fall and spring tilling and increasing mulching. Moreover, crane conservation efforts would be most beneficial if they were focused in the eastern portions of the CPRV and in fields as close as possible to both known roosting and large amounts of wet grassland habitats.

Location and agricultural practices influence spring use of harvested cornfields by cranes and geese in Nebraska

USGS Publications Warehouse

Anteau, M.J.; Sherfy, M.H.; Bishop, A.A.

2011-01-01

Millions of ducks, geese, and sandhill cranes (Grus canadensis; hereafter cranes) stop in the Central Platte River Valley (CPRV) of Nebraska to store nutrients for migration and reproduction by consuming corn remaining in fields after harvest. We examined factors that influence use of cornfields by cranes and geese (all mid-continent species combined; e.g., Anser, Chen, and Branta spp.) because it is a key step to efficient conservation planning aimed at ensuring that adequate food resources are available to migratory birds stopping in the CPRV. Distance to night-time roost site, segment of the CPRV (west to east), and agricultural practices (post-harvest treatment of cornfields: idle, grazed, mulched, mulched and grazed, and tilled) were the most important and influential variables in our models for geese and cranes. Probability of cornfield use by geese and cranes decreased with increasing distance from the closest potential roosting site. The use of cornfields by geese increased with the density of corn present there during the early migration period, but field use by cranes appeared not to be influenced by early migration corn density. However, probability of cornfield use by cranes did increase with the amount of wet grassland habitat within 4.8 km of the field. Geese were most likely to use fields that were tilled and least likely to use fields that were mulched and grazed. Cranes were most likely to use fields that were mulched and least likely to use fields that were tilled, but grazing appeared not to influence the likelihood of field use by cranes. Geese were more likely to use cornfields in western segments of the CPRV, but cranes were more likely to use cornfields in eastern segments. Our data suggest that managers could favor crane use of fields and reduce direct competition with geese by reducing fall and spring tilling and increasing mulching. Moreover, crane conservation efforts would be most beneficial if they were focused in the eastern portions of the CPRV and in fields as close as possible to both known roosting and large amounts of wet grassland habitats. ?? 2011 The Wildlife Society.

Anthropometric assessment of crane cabins and recommendations for design: A case study.

PubMed

Zunjic, Aleksandar; Brkic, Vesna Spasojevic; Klarin, Milivoj; Brkic, Aleksandar; Krstic, Dragan

2015-01-01

Work of crane operators is very difficult and demanding. Therefore, it is very important that the cabin of a crane be designed on the basis of relevant anthropometric data. However, it is very difficult to find a research that considers anthropometric convenience of crane cabins. From the theoretical viewpoint, it is important to perceive and to classify effects of the anthropometric incompatibility of crane cabins. Globally, the objective is to consider the anthropometric convenience of existing crane cabins, and possibilities for improvements of their design from the ergonomic point of view. In this regard, it is significant to detect constraints that impede or hinder the work of the crane operators, which could be overcome with certain anthropometric solutions. The main objective is to examine whether and to what extent is justifiable to use anthropometric data that are obtained on the basis of general (national) population, during designing the crane cabins. For the assessment of existing crane cabins and the work of operators, four methods were used: observation of the work of the operators and design solutions of the cabins, the checklist approach, interviewing of operators and the experimental research based on obtaining the data on the population of crane operators. Results of the analysis based on the method of observation, analysis based on the application of the checklist, as well as interviewing of the operators indicate that certain construction constraints of the components in the cabins are the main reasons of reduced visibility and improper working postures of operators. All this has caused the emergence of continuous musculoskeletal loading of the crane operators. The results of the anthropometric research that were obtained on the population of crane operators in this case study suggest that there is a statistically significant difference, when compared data of this population of workers with anthropometric data from the general population. Analyzed workplaces in crane cabins do not correspond to the majority of operators from the anthropometric standpoint. The conducted anthropometric analysis has been indicated that could be made the mistake, if dimensions of the cabin and layout of equipment would be relied on data derived from the general population of citizens. In order to achieve greater precision in the design and configuration of equipment, it is recommended using the data that are obtained directly on the population of the crane operators when designing the cabin.

Quality Improvement: Creating a Float Pool Specialty Within a New Graduate Residency.

PubMed

Shinners, Jean; Alejandro, John Aldrich N; Frigillana, Vanessa; Desmond, Juliann; LaVigne, Ronda

2016-01-01

Creating new norms is essential for success as acute care leaders seek to redesign care delivery. Through the structures of the registered nurse (RN) residency and utilizing a quality improvement process, new graduate RNs demonstrated success in creating a centralized float pool resource.

1. CONTEXTUAL VIEW OF DRY DOCK NO. 4, LOOKING NORTHEAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. CONTEXTUAL VIEW OF DRY DOCK NO. 4, LOOKING NORTHEAST FROM ROOF OF BUILDING NO. 620. NOTE OVERHEAD CRANE (STRUCTURE NO. 1043) AND STRUCTURAL ASSEMBLY SHOP (BUILDING NO. 541) IN LEFT BACKGROUND. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Dry Dock No. 4, Broad Street south of Government Avenue, Philadelphia, Philadelphia County, PA

30 CFR 57.16015 - Work or travel on overhead crane bridges.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Work or travel on overhead crane bridges. 57... MINES Materials Storage and Handling § 57.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with...

30 CFR 56.16015 - Work or travel on overhead crane bridges.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Work or travel on overhead crane bridges. 56... Materials Storage and Handling § 56.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with substantial...

29 CFR 1919.28 - Unit proof tests-cranes and gear accessory thereto.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Unit proof tests-cranes and gear accessory thereto. 1919.28... Loads; Heat Treatment; Competent Persons § 1919.28 Unit proof tests—cranes and gear accessory thereto. (a) Except as noted in paragraph (e) of this section, cranes and other hoisting machines, together...

75 FR 44288 - Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-28

...] Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of... requirements specified in the Standard on Overhead and Gantry Cranes (29 CFR 1910.179). DATES: Comments must be... requirements for: Marking the rated load of cranes; preparing certification records to verify the inspection of...

77 FR 23673 - Notice of Availability of Government-Owned Inventions; Available for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-20

... Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001, telephone 812-854-4100. Authority: 35 U.S.C. 207, 37 CFR part 404. Dated...

78 FR 55687 - Notice of Intent To Grant Partially Exclusive Patent License; Silvanus, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-11

... with Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001, telephone 812-854-4100. Authority: 35 U.S.C. 207...

76 FR 23314 - Notice of Intent To Grant Partially Exclusive Patent License; Sean Linehan

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-26

... are to be filed with Naval Surface Warfare Center, Crane Division, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Division, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001, telephone 812-854-4100...

77 FR 5242 - Notice of Intent To Grant Exclusive Patent License; Daniel Defense, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

... Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001, telephone (812) 854-4100. Authority: 35 U.S.C. 207, 37...

78 FR 8985 - Cranes and Derricks in Construction: Revising the Exemption for Digger Derricks

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-07

.... OSHA-2012-0025] RIN 1218-AC75 Cranes and Derricks in Construction: Revising the Exemption for Digger... November 9, 2012, to broaden the exemption for digger derricks in its construction standard for cranes and... broaden the exemption for digger derricks in its construction standard for cranes and derricks. In those...

30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What requirements must I follow for cranes and... Performance Standards § 250.108 What requirements must I follow for cranes and other material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance with American...

77 FR 23673 - Notice of Intent To Grant Exclusive Patent License; Aurora Technologies, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-20

... objections are to be filed with the Naval Surface Warfare Center, Crane Div, Code OOL, Bldg. 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001, telephone 812-854-4100...

30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

Code of Federal Regulations, 2012 CFR

2012-07-01

... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

Code of Federal Regulations, 2014 CFR

2014-07-01

... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

Code of Federal Regulations, 2013 CFR

2013-07-01

... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

30 CFR 57.16015 - Work or travel on overhead crane bridges.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Work or travel on overhead crane bridges. 57... MINES Materials Storage and Handling § 57.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with...

30 CFR 56.16015 - Work or travel on overhead crane bridges.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Work or travel on overhead crane bridges. 56... Materials Storage and Handling § 56.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with substantial...

Dredging Research Program. Dredge Mooring Study, Recommended Design, Phase 2 Report

DTIC Science & Technology

1992-05-01

describes the amount of dock space and staging area required (250 ft by 300 ft of dock space), crane requirements (a 50- to 60-ton crane ), and time and...including a diver) in 1 week or less (5 days minimum). With the addition of a second crane and second anchor handling vessel, the assembly and installation...describes the amount of dock space and staging area required (250 ft by 300 ft of dock space), crane requirements (a 50- to 60-ton crane ), and time and

The bile acid composition of crane gallbladder bile

USGS Publications Warehouse

Serafin, J.A.

1983-01-01

1. The biliary bile acids of the whooping crane (Grus americana) and the Florida sandhill crane (G. canadensis pratensis) have been examined.2. Cholic acid (CA), chenodeoxycholic acid (CDOCA) and lithocholic acid were found in bile from both species of these North American cranes.3. CDOCA and CA were the primary bile acids in both species, together constituting 70% or more of the bile acids by weight.4. The primary bile acids of cranes appear to be the same as those that have been identified in other avian species.

Fusarium mycotoxins from peanuts suspected as a cause of sandhill crane mortality

USGS Publications Warehouse

Windingstad, R.M.; Cole, R.J.; Nelson, P.E.; Roffe, T.J.; George, R.R.; Dorner, J.W.

1989-01-01

An estimated 9,500 sandhill cranes (Grus canadensis) died in Gaines County, Texas and Roosevelt County, New Mexico between 1982 and 1987. The predominant clinical sign observed in sick cranes was their inability to hold their heads erect, both while standing and flying. Multiple muscle hemorrhages and submandibular edema were the most common lesions seen at necropsy. Mycotoxins produced by Fusarium sp. growing during cold, wet weather on peanuts left in the field after harvest, the predominant foods of the dead cranes at the time of these mortality events, were identified as the most likely cause of this mortality. Rendering moldy peanuts inaccessible to the cranes by conventional tillage resulted in reduced crane mortality in these areas.

KSC-08pd4140

NASA Image and Video Library

2008-12-04

CAPE CANAVERAL, Fla. – Motion of the segments of a new crane is tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78’-2” and a hook height of 48’-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system. Photo credit: NASA/Kim Shiflett

KSC-08pd4138

NASA Image and Video Library

2008-12-04

CAPE CANAVERAL, Fla. – Motion of the segments of a new crane is tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78’-2” and a hook height of 48’-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system. Photo credit: NASA/Kim Shiflett

KSC-08pd3660

NASA Image and Video Library

2008-11-08

CAPE CANAVERAL, Fla. – Segments of a crane are being offloaded at the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78’-2” and a hook height of 48’-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system. Photo credit: NASA/Kim Shiflett

KSC-08pd3661

NASA Image and Video Library

2008-11-08

CAPE CANAVERAL, Fla. – Segments of a crane are lowered onto the floor of the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78’-2” and a hook height of 48’-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system. Photo credit: NASA/Kim Shiflett

KSC-08pd3659

NASA Image and Video Library

2008-11-08

CAPE CANAVERAL, Fla. – Segments of a crane arrive at the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78’-2” and a hook height of 48’-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system. Photo credit: NASA/Kim Shiflett

KSC-08pd4137

NASA Image and Video Library

2008-12-04

CAPE CANAVERAL, Fla. – Segments of a new crane are tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78’-2” and a hook height of 48’-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system. Photo credit: NASA/Kim Shiflett

KSC-08pd3662

NASA Image and Video Library

2008-11-08

CAPE CANAVERAL, Fla. – Segments of a crane are moved into the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78’-2” and a hook height of 48’-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system. Photo credit: NASA/Kim Shiflett

Whooping crane titers to eastern equine encephalitis vaccinations

USGS Publications Warehouse

Olsen, Glenn H.; Kolski, E.; Hatfield, J.S.; Docherty, D.E.; Chavez-Ramirez, Felipe

2005-01-01

In 1984 an epizootic of eastern equine encephalitis (EEE) virus killed 7 of 39 (18%) whooping cranes in captivity at the Patuxent Wildlife Research Center in Laurel, Maryland, USA. Since that time whooping cranes have been vaccinated with a human EEE vaccine. This vaccine was unavailable for several years, necessitating use of an equine vaccine in the cranes. This study compared the antibody titers measured for three years using the human vaccine with those measured for two years using the equine form. Whooping cranes developed similarly elevated titers in one year using the human vaccine and both years using the equine vaccine. However, in two years where the human vaccine was used, the whooping cranes developed significantly lower titers compared to other years.

Research note: The isolation of a herpes virus from captive cranes with an inclusion body disease

USGS Publications Warehouse

Docherty, D.E.; Henning, D.J.

1980-01-01

A viral agent, identified as a herpesvirus and tentatively called 'inclusion body disease of cranes' (IBDC), was isolated from captive cranes involved in a die-off at the International Crane Foundation near Baraboo, Wisconsin. Preliminary animal susceptibility tests, based on experimental infections, suggested that White Pekin ducklings up to 17 days old and adult coots were susceptible to the IBDC virus whereas 16-day-old White Leghorn chicks and 64-day-old Muscovy ducks were not. No serum antibody to IBDC virus was detected in 95 wild sandhill cranes collected in Wisconsin or Indiana in 1976 and 1977. However, 9 of 11 captive cranes in the affected area at the ICF had antibody to this agent.

Application of 3D Laser Scanner to Forensic Engineering.

PubMed

Park, Chan-Seong; Jeon, Hong-Pil; Choi, Kwang-Soo; Kim, Jin-Pyo; Park, Nam-Kyu

2018-05-01

In the case of building collapses and overturned structures, a three-dimensional (3D) collapse or overturn model is required to reconstruct the accident. As construction sites become increasingly complex and large, 3D laser scanning is sometimes the best tool to accurately document and store the site conditions. This case report presents one case of a structure collapse and one case of an overturned crane reconstructed by a 3D laser scanner. In the case of structural collapse of a prefabricated shoring system, a 3D model reconstructed all the members successfully, a task that is nearly impossible using a scale such as a tape measure. The reconstructed prefabricated shoring system was verified through a structural analysis through comparison with the construction drawings to investigate faults in construction. In the case of the overturned crane, the jib angle and other major dimensions were successfully acquired through 3D laser scanning and used to estimate the working radius. As a result, the propriety of the working radius with the given lifting load was successfully determined. © 2017 American Academy of Forensic Sciences.

Air-Deployable Profiling Floats for Tropical Cyclone Research

NASA Astrophysics Data System (ADS)

Jayne, S. R.; Robbins, P.; Owens, B.; Ekholm, A.; Dufour, J. E.; Sanabia, E.

2016-02-01

The development of a smaller profiling float that can be launched from Hurricane Hunter aircraft offers the opportunity to monitor the upper-ocean thermal structure over a time span of many months. These Argo-type profiling floats can be deployed in advance of, or during, a tropical cyclone from any aircraft equipped with an A-sized (AXBT) launch tube, or from the stern ramp of a C-130. The floats have the same dimensions as an AXBT and weigh about 8.5 kg. Upon deployment, the floats parachute to the surface, detach and automatically begin their programmed mission. The recorded temperature data is averaged over 1-meter bins that are reported back via the Iridium satellite phone network, which is then automatically processed and posted to the GTS. The floats are also reprogrammable via the 2-way communication afforded by Iridium. We report on the results of deployments during the 2014 and 2015 hurricane seasons. Unique observations of the ocean response from Hurricane Ignacio are particularly noteworthy and will be presented. Further plans for continued development of floats include measuring salinity (from an inductive conductivity sensor) and observations of the surface wave field (measured by an onboard accelerometer) will also be described.

Assessing Fatigue and Ultimate Load Uncertainty in Floating Offshore Wind Turbines Due to Varying Simulation Length

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, G.; Lackner, M.; Haid, L.

2013-07-01

With the push towards siting wind turbines farther offshore due to higher wind quality and less visibility, floating offshore wind turbines, which can be located in deep water, are becoming an economically attractive option. The International Electrotechnical Commission's (IEC) 61400-3 design standard covers fixed-bottom offshore wind turbines, but there are a number of new research questions that need to be answered to modify these standards so that they are applicable to floating wind turbines. One issue is the appropriate simulation length needed for floating turbines. This paper will discuss the results from a study assessing the impact of simulation lengthmore » on the ultimate and fatigue loads of the structure, and will address uncertainties associated with changing the simulation length for the analyzed floating platform. Recommendations of required simulation length based on load uncertainty will be made and compared to current simulation length requirements.« less

20. GENERAL VIEW OF CONSTRUCTION LOOKING NORTHEAST SHOWING THE CONSTRUCTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. GENERAL VIEW OF CONSTRUCTION LOOKING NORTHEAST SHOWING THE CONSTRUCTION BRIDGE, GANTRY CRANE AND STRUCTURAL PIERS. - Wilson Dam & Hydroelectric Plant, Spanning Tennessee River at Wilson Dam Road (Route 133), Muscle Shoals, Colbert County, AL

Cranes, hoists, and rigging. A safety training manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stinnett, L.

The handling equipment discussed in this manual is the type that lifts, lowers, and locates (positions) heavy material - cranes and hoists. The crane/hoist family of equipment may be as small as a single pulley/rope system handling several pounds, or as large as a marine crane system that recently (1985) hoisted a 5005-metric ton oil drilling rig from a barge and placed it on the seabed of England's North Atlantic offshore oil field. An equivalent ''pick'' would be a 6-ft-high solid pine board, 360 ft long and 160 ft wide (the dimensions of a football field). The capacity of themore » cranes and hoists at Sandia National Laboratories in Albuquerque (SNLA) fits somewhere within the first 2% of the marine pick or lift described above. SNLA has several mobile cranes and more than 500 other types of cranes and hoists located in more than 100 buildings. The Department of Energy (DOE) and SNL have safety policies and directives that require the operators of heavy equipment to be trained and authorized. The Cranes, Hoists, and Rigging Safety Training Program, sponsored by the SNLA Safety Department, is an effort to fulfill those safety policy requirements. This manual will be used as a safety training aid and will be issued as a reference document for supervisors, operators, inspectors, and service personnel who use cranes or hoists during their regular duties.« less

Observation of sandhill cranes' (Grus canadensis) flight behavior in heavy fog

USGS Publications Warehouse

Kirsch, Eileen M.; Wellik, Mike J.; Suarez, Manuel J.; Diehl, Robert H.; Lutes, Jim; Woyczik, Wendy; Krapfl, Jon; Sojda, Richard S.

2015-01-01

The behaviors of birds flying in low visibility conditions remain poorly understood. We had the opportunity to monitor Sandhill Cranes (Grus canadensis) flying in heavy fog with very low visibility during a comprehensive landscape use study of refuging cranes in the Horicon Marsh in southeastern Wisconsin. As part of the study, we recorded flight patterns of cranes with a portable marine radar at various locations and times of day, and visually counted cranes as they departed the roost in the morning. We compared flight patterns during a fog event with those recorded during clear conditions. In good visibility, cranes usually departed the night roost shortly after sunrise and flew in relatively straight paths toward foraging areas. In fog, cranes departed the roost later in the day, did not venture far from the roost, engaged in significantly more circling flight, and returned to the roost site rather than proceeding to foraging areas. We also noted that compared to mornings with good visibility, cranes flying in fog called more frequently than usual. The only time in this 2-year study that observers heard young of the year calling was during the fog event. The observed behavior of cranes circling and lingering in an area while flying in poor visibility conditions suggests that such situations may increase chances of colliding with natural or anthropogenic obstacles in the vicinity.

Results of an experiment to lead cranes on migration behind motorized ground vehicles

USGS Publications Warehouse

Ellis, D.H.; Clauss, B.; Watanabe, T.; Mykut, R.C.; Kinloch, M.; Ellis, Catherine H.; Urbanek, Richard P.; Stahlecker, Dale W.

1997-01-01

Ten greater sandhill cranes (Grus canadensis tabida), trained to enter and ride in a specially equipped truck, were transported at 80? days of age from their rearing site at Patuxent Wildlife Research Center (Patuxent), Maryland, to a reintroduction site located within the species? former breeding range in northern Arizona. After 5 additional weeks of training, these juvenile cranes were led south ca 600 km to a wintering area on the Arizona/Mexico border. Nine of the 10 survived the trek, 495 km of which was flown, although only a few cranes flew every stage of the route. Their longest flight was 77 km. Major problems during the migration were power line collisions (three, one fatal), eagle attacks (none fatal), and overheating (when air temperatures exceeded ca 25?C). All cranes that entered training quickly learned to follow the truck, and their tenacity when following under unfavorable conditions (e.g., poor light, extreme dust, or heat) showed that cranes could consistently be led over long distances. We cannot predict if the cranes will retrace their route unassisted when adults, but 2 cranes returned 130 km to the starting point of the migration after the flock was scattered by an eagle during our migration south. Three other cranes were recovered 55 km from the attack site and on course toward the starting point.

Book review: A chorus of cranes: The cranes of North America and the world

USGS Publications Warehouse

Pearse, Aaron T.

2017-01-01

Cranes (Gruidae) are widely distributed throughout the world, have lived on Earth for several million years, and currently reside on five continents. Archaeological evidence and historical references suggest that humans have interacted with and been captivated by cranes for many thousands of years (e.g., Leslie 1988, Muellner 1990). A glimpse of our reverence for these birds can be found in A Chorus of Cranes by Paul A. Johnsgard, with photographs by Thomas D. Mangelsen. Many species of cranes are currently identified as threatened or endangered, and their future will likely rest in the hands of humans; this book presents their plight and some of the measures that have been taken to conserve them. Dr. Johnsgard, an emeritus professor at the University of Nebraska-Lincoln, is a prolific writer, having written more than 60 books in ornithology and other topics. This book serves as the latest update of previous efforts concerning crane biology, conservation, and management. A review without making comparisons to his past works is difficult, yet this assessment will primarily focus on the content of the current book, with little reference to past endeavors.A Chorus of Cranes: The Cranes of North America and the World by Paul A. Johnsgard. 2015. University Press of Colorado, Boulder, CO, USA. x + 208 pp., 38 color photographs, 41 figures. ISBN 978-1-60732-436-2. $23.95 (Ebook). ISBN 978-1-60732-436-9.

Fluid-structure interaction simulation of floating structures interacting with complex, large-scale ocean waves and atmospheric turbulence with application to floating offshore wind turbines

NASA Astrophysics Data System (ADS)

Calderer, Antoni; Guo, Xin; Shen, Lian; Sotiropoulos, Fotis

2018-02-01

We develop a numerical method for simulating coupled interactions of complex floating structures with large-scale ocean waves and atmospheric turbulence. We employ an efficient large-scale model to develop offshore wind and wave environmental conditions, which are then incorporated into a high resolution two-phase flow solver with fluid-structure interaction (FSI). The large-scale wind-wave interaction model is based on a two-fluid dynamically-coupled approach that employs a high-order spectral method for simulating the water motion and a viscous solver with undulatory boundaries for the air motion. The two-phase flow FSI solver is based on the level set method and is capable of simulating the coupled dynamic interaction of arbitrarily complex bodies with airflow and waves. The large-scale wave field solver is coupled with the near-field FSI solver with a one-way coupling approach by feeding into the latter waves via a pressure-forcing method combined with the level set method. We validate the model for both simple wave trains and three-dimensional directional waves and compare the results with experimental and theoretical solutions. Finally, we demonstrate the capabilities of the new computational framework by carrying out large-eddy simulation of a floating offshore wind turbine interacting with realistic ocean wind and waves.

29 CFR 1918.55 - Cranes (See also § 1918.11).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Cranes (See also § 1918.11). 1918.55 Section 1918.55 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Vessel's Cargo Handling Gear § 1918.55 Cranes (See also § 1918.11). The following requirements shall apply to the use of cranes forming part of a vessel's...

Genome sizes of cranes (Aves: Gruiformes).

PubMed

Rasch, Ellen M

2006-12-01

The DNA content of blood cell nuclei of 15 species of cranes was determined by Feulgen-DNA cytophotometry. Genome sizes agree with values reported elsewhere for several crane species analyzed by flow cytometry. Males have more DNA per cell than females in several species. A karyotype where 2n = 80 is reported for a male greater sandhill crane. Copyright 2006 Wiley-Liss, Inc.

78 FR 55687 - Notice of Availability of Government-Owned Invention; Available for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-11

... Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001. FOR FURTHER INFORMATION CONTACT: Mr. Christopher Monsey, Naval Surface Warfare Center, Crane Div, Code OOL, Bldg 2, 300 Highway 361, Crane, IN 47522-5001, telephone 812-854-4100. (Authority: 35 U.S.C. 207, 37 CFR Part 404) N.A...

78 FR 68477 - Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-14

...] Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of... requirements specified in the Standard on Overhead and Gantry Cranes (29 CFR 1910.179). DATES: Comments must be... information (29 U.S.C. 657). The paperwork provisions of the Standard on Overhead and Gantry Cranes specify...

Protein electrophoresis in cranes with presumed insect bite.

PubMed

Hartup, Barry K; Schroeder, Carrie A

2006-06-01

Serum protein electrophoresis (SPE) has emerged as a potentially valuable diagnostic tool in avian medicine; yet, there is limited information regarding SPE in cranes. Since 2000, 20 cases of unilateral periocular or facial soft tissue swelling, blepharitis, feather loss, and ocular or nasal discharge attributed to insect bite hypersensitivity were observed in cranes from a captive breeding center. SPE may be useful for evaluating these lesions. The aim of this study was to characterize the inflammatory response in cranes with hypersensitivity reactions using SPE. Serum samples from 7 cranes diagnosed with hypersensitivity reactions were submitted to a diagnostic laboratory for agarose gel electrophoresis. Results were compared to those in control serum samples obtained from the same cranes during routine physical examination, when they were clinically healthy. Total protein and a- and g-globulin concentrations were significantly increased and albumin/globulin ratios were significantly decreased in serum samples from cranes with hypersensitivity lesions compared with control samples. Using SPE, we documented changes in protein fraction concentrations in cranes with clinical signs of hypersensitivity. The increase in alpha- and gamma-globulin concentrations suggested inflammation and antigenic stimulation, consistent with a Type I hypersensitivity reaction.

Behavior comparisons for whooping cranes raised by costumed caregivers and trained for an ultralight-led migration

USGS Publications Warehouse

Olsen, Glenn H.; Folk, Martin J.; Nesbitt, Stephen A.

2008-01-01

The successful reintroduction program being run by the Whooping Crane Eastern Partnership using whooping cranes (Grus americana) trained to fly behind ultralight aircraft depends on a supply of these trained crane colts each year. The crane colts are hatched from eggs contributed by the various partners and trained to follow costume clad humans and ultralight aircraft at USGS Patuxent Wildlife Research Center, Laurel, Maryland, USA. After several seasons of raising small numbers of crane colts (7-14), we wanted to increase the number of birds being trained, but were restrained by limits in our facilities. By altering the established husbandry and training program to allow the use of a recently modified facility, we have increased the number of colts raised for this release program. However, we did not know whether the new facility and husbandry regime would significantly alter the behavior of the colts. Therefore, we have begun a two year study to determine if there are differences in the behavior of cranes raised by the two methods, and if any of the differences discovered relate directly to whooping crane survival and migration skills in the release program.

Geographic distribution of the mid-continent population of sandhill cranes and related management applications

USGS Publications Warehouse

Krapu, Gary L.; Brandt, David A.; Jones, Kenneth L.; Johnson, Douglas H.

2011-01-01

The Mid-continent Population (MCP) of sandhill cranes (Grus canadensis) is widely hunted in North America and is separated into the Gulf Coast Subpopulation and Western Subpopulation for management purposes. Effective harvest management of the MCP requires detailed knowledge of breeding distribution of subspecies and subpopulations, chronology of their use of fall staging areas and wintering grounds, and exposure to and harvest from hunting. To address these information needs, we tagged 153 sandhill cranes with Platform Transmitting Terminals (PTTs) during 22 February–12 April 1998–2003 in the Central and North Platte River valleys of south-central Nebraska. We monitored PTT-tagged sandhill cranes, hereafter tagged cranes, from their arrival to departure from breeding grounds, during their fall migration, and throughout winter using the Argos satellite tracking system. The tracking effort yielded 74,041 useable locations over 49,350 tag days; median duration of tracking of individual cranes was 352 days and 73 cranes were tracked >12 months. Genetic sequencing of mitochondrial DNA (mtDNA) from blood samples taken from each of our random sample of tagged cranes indicated 64% were G. c. canadensis and 34% were Grus canadensis tabida. Tagged cranes during the breeding season settled in northern temperate, subarctic, and arctic North America (U.S. [23%, n = 35], Canada [57%, n = 87]) and arctic regions of northeast Asia (Russia [20%, n = 31]). Distribution of tagged cranes by breeding affiliation was as follows: Western Alaska–Siberia (WA–S, 42 ± 4% [SE]), northern Canada–Nunavut (NC–N, 21 ± 4%), west-central Canada–Alaska (WC–A, 23 ± 4%) and East-central Canada–Minnesota (EC–M, 14 ± 3%). All tagged cranes returned to the same breeding affiliation used during the previous year with a median distance of 1.60 km (range: 0.08–7.7 km, n = 53) separating sites used in year 1 and year 2. Fall staging occurred primarily in central and western Saskatchewan (69%), North Dakota (16%), southwestern Manitoba (10%), and northwestern Minnesota (3%). Space-use sharing indices showed that except for NC–N and WC–A birds, probability of finding a crane from one breeding affiliation within the home range of another breeding affiliation was low during fall staging. Tagged cranes from WC–A and EC–M breeding affiliations, on average, spent 25 and 20 days, respectively, longer on fall staging areas in the northern plains than did WA–S and NC–N birds. Cranes in the NC–N, WA–S, and WC–A affiliations spent 99%, 74%, and 64%, respectively, of winter in western Texas in Hunting Zone A; EC–M cranes spent 83% of winter along the Texas Gulf Coast in Hunting Zone C. Tagged cranes that settled within the breeding range of the Gulf Coast Subpopulation spent 28% and 42% of fall staging and winter within the range of the Western Subpopulation, indicating sufficient exchange of birds to potentially limit effectiveness of MCP harvest management. Harvests of EC–M and WC–A cranes during 1998–2003 were disproportionately high to their estimated numbers in the MCP, suggesting more conservative harvest strategies may be required for these subpopulations in the future, and for sandhill cranes to occupy major parts of their historical breeding range in the Prairie Pothole Region. Exceptionally high philopatry of MCP cranes of all 4 subpopulations to breeding sites coupled with strong linkages between crane breeding distribution, and fall staging areas and wintering grounds, provide managers guidance for targeting MCP crane harvest to meet management goals. Sufficient temporal or spatial separation exists among the 4 subpopulations on fall staging areas and wintering grounds to allow harvest to be targeted at the subpopulation level in all states and provinces (and most hunting zones within states and provinces) when conditions warrant. Knowledge gained from our study provides decision-makers in the United States, Canada, Mexico, and Russia with improved guidance for developing sound harvest regulations, focusing conservation efforts, and generating collaborative efforts among these nations on sandhill crane research and management to meet mutually important goals.

Antibody response of sandhill and whooping cranes to an eastern equine encephalitis virus vaccine

USGS Publications Warehouse

Clark, G.G.; Dein, F.J.; Crabbs, C.L.; Carpenter, J.W.; Watts, D.M.

1987-01-01

As a possible strategy to protect whooping cranes (Grus americana) from fatal eastern equine encephalitis (EEE) viral infection, studies were conducted to determine the immune response of this species and sandhill cranes (Grus canadensis) to a formalin-inactivated EEE viral vaccine. Viral-specific neutralizing antibody was elicited in both species after intramuscular (IM) vaccination. Subcutaneous and intravenous routes of vaccination failed to elicit detectable antibody in sandhill cranes. Among the IM vaccinated cranes, the immune response was characterized by nondetectable or low antibody titers that waned rapidly following primary exposure to the vaccine. However, one or more booster doses consistently elicited detectable antibody and/or increased antibody titers in the whooping cranes. In contrast, cranes with pre-existing EEE viral antibody, apparently induced by natural infection, exhibited a rapid increase and sustained high-antibody titers. Even though EEE virus vaccine induced neutralizing antibody and produced no adverse side effects, further studies will be required to determine the protective efficacy of the antibody.

KSC-08pd4139

NASA Image and Video Library

2008-12-04

CAPE CANAVERAL, Fla. – Movement of the hook from a new crane are is tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78’-2” and a hook height of 48’-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system. Photo credit: NASA/Kim Shiflett

Migration patterns and movements of sandhill cranes wintering in central and southwestern Louisiana

USGS Publications Warehouse

King, Sammy L.; Pierce, Aaron R.; Hersey, Kent R.; Winstead, Nicholas; Hartup, Barry K.

2010-01-01

In this study we trapped wintering sandhill cranes (Grus canadensis) in Louisiana and fitted them with satellite transmitters to determine their migration routes. Four of the 6 sandhill cranes with validated locations and a terminus point used the Central Flyway for spring migration; 2 of these 4 (the only 2 for which we have data) also used the Central Flyway for fall migration. Two of the 6 birds used the Mississippi Flyway for spring migration. The results of this study suggest that reintroduced whooping cranes (G. americana) that intermix and migrate with sandhill cranes that winter in Louisiana may enter the Central Flyway. In addition, the Mississippi Flyway is a viable option to use as a migration route for whooping cranes if they are reintroduced in Louisiana.

View northnortheast of drydock no. 2 and its portal cranes. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View north-northeast of drydock no. 2 and its portal cranes. Main crane, 50 long tons capacity/maximum height 118 "2", is at left; whip crane, 53 long tons capacity maximum height 173 "8" is at center; auxiliary crane, 15 long tons capacity/maximum height 161 "0" is at right. Building at left is the turret shed. The vessel at the lower right of the photograph is a receiving ship formerly used for processing and temporary housing of naval personnel. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Drydock No. 2, League Island, Philadelphia, Philadelphia County, PA

Suspected fusariomycotoxicosis in sandhill cranes (Grus canadensis): clinical and pathological findings.

USGS Publications Warehouse

Roffe, Thomas J.; Stroud, Richard K.; Windingstad, Ronald M.

1989-01-01

In 1985 and 1986, large-scale natural die-offs of sandhill cranes in Texas were attributed to fusariomycotoxicosis. These birds demonstrated a progressive loss of motor control to the neck, wings, and legs. Based on necropsy and/or histopathology of 31 cranes, the most common lesions involved skeletal muscle and included hemorrhages, granulomatous myositis, thrombosis, and vascular degeneration. Serum chemistry results revealed that levels of creatinine kinase, aspartate aminotransferase, and alanine aminotransferase were above published normals. However, only alanine aminotransferase was higher in clinically affected cranes than in normal cranes collected from the same area.

Stability Assessment as a Criterion of Stabilization of the Movement Trajectory of Mobile Crane Working Elements

NASA Astrophysics Data System (ADS)

Kacalak, W.; Budniak, Z.; Majewski, M.

2018-02-01

The article presents a stability assessment method of the mobile crane handling system based on the safety indicator values that were accepted as the trajectory optimization criterion. With the use of the mathematical model built and the model built in the integrated CAD/CAE environment, analyses were conducted of the displacements of the mass centre of the crane system, reactions of the outrigger system, stabilizing and overturning torques that act on the crane as well as the safety indicator values for the given movement trajectories of the crane working elements.

Disseminated visceral coccidiosis in whooping cranes

USGS Publications Warehouse

Carpenter, J.W.; Spraker, T.R.; Novilla, M.N.

1980-01-01

Three 13- to 18-day-old whooping cranes (Grus americana) and a 9-year-old whooping crane died in outdoor pens at the Patuxent Wildlife Research Center. The deaths were associated with an overwhelming systemic infection by an intracellular protozoan parasite, which resulted in enteritis, granulomatous bronchopneumonia, hepatitis, splenitis, and myocarditis. The clinical, histopathologic, and electron microscopic findings were similar to those in sandhill cranes (Grus canadensis) at the Patuxent Center found to be infected with Eimeria reichenowi and E gruis. Since these eimerian species also parasitize wild whooping cranes, this parasite might be an important pathogenic agent for this species.

KSC-08pd3083

NASA Image and Video Library

2008-10-09

CAPE CANAVERAL, FIa. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, workers attach an overhead crane to the flexible hose rotary coupler. After attachment, the crane will lift and move the coupler to the Lightweight Multi-Purpose Experiment Support Structure Carrier for installation. The carrier will be installed in space shuttle Endeavour for the STS-126 mission to the International Space Station. The 15-day flight will deliver equipment and supplies to the space station in preparation for expansion from a three- to six-person resident crew aboard the complex. The mission also will include four spacewalks to service the station’s Solar Alpha Rotary Joints. Photo credit: NASA/Jim Grossmann

KSC-08pd3082

NASA Image and Video Library

2008-10-09

CAPE CANAVERAL, FIa. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, an overhead crane is maneuvered above the flexible hose rotary coupler. After attachment, the crane will lift and move the coupler to the Lightweight Multi-Purpose Experiment Support Structure Carrier for installation. The carrier will be installed in space shuttle Endeavour for the STS-126 mission to the International Space Station. The 15-day flight will deliver equipment and supplies to the space station in preparation for expansion from a three- to six-person resident crew aboard the complex. The mission also will include four spacewalks to service the station’s Solar Alpha Rotary Joints. Photo credit: NASA/Jim Grossmann

Longshoring Industry

DTIC Science & Technology

2001-01-01

operator. (d) Prohibited usage. (1) Equipment shall not be used in a manner that exerts sideloading stresses upon the crane or derrick boom. (2) No crane ... hooks shall be latched or otherwise secured to prevent accidental load disengagement. (f) General. (1) Operating controls. (i) Crane and derrick...when the boom is supported on a dolly. The empty hook or other attachment shall be secured. (4) Unattended cranes . The following steps shall be taken

Research on stability of nozzle-floating plate institution

NASA Astrophysics Data System (ADS)

Huang, Bin; Tao, Jiayue; Yi, Jiajing; Chen, Shijing

2016-01-01

In this paper, air hammer instability of nozzle-floating plate institution in gas lubricated force sensor were studied. Through establishment of the theoretical model for the analysis of the nozzle-floating plate institution stability, combined with air hammer stability judgment theorems, we had some simulation research on the radius of the nozzle, the radius of the pressure chamber, pressure chamber depth, orifice radius and the relationship between air supply pressure and bearing capacity, in order to explore the instability mechanism of nozzle-floating plate institution. For conducting experimental observations for the stability of two groups nozzle-floating plate institution, which have typical structural parameters conducted experimental observations. We set up a special experimental device, verify the correctness of the theoretical study and simulation results. This paper shows that in the nozzle-floating plate institution, increasing the nozzle diameter, reduced pressure chamber radius, reducing the depth of the pressure chamber and increase the supply orifice radius, and other measures is conducive to system stability. Results of this study have important implications for research and design of gas lubricated force sensor.

Unique Chernobyl Cranes for Deconstruction Activities in the New Safe Confinement - 13542

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parameswaran, N.A. Vijay; Chornyy, Igor; Owen, Rob

2013-07-01

The devastation left behind from the Chernobyl nuclear power plant (ChNPP) Unit 4 accident which occurred on April 26, 1986 presented unparalleled technical challenges to the world engineering and scientific community. One of the largest tasks that are in progress is the design and construction of the New Safe Confinement (NSC). The NSC is an engineered enclosure for the entire object shelter (OS) that includes a suite of process equipment. The process equipment will be used for the dismantling of the destroyed Chernobyl Nuclear Power Plant (ChNPP) Unit. One of the major mechanical handling systems to be installed in themore » NSC is the Main Cranes System (MCS). The planned decontamination and decommissioning or dismantling (D and D) activities will require the handling of heavily shielded waste disposal casks containing nuclear fuel as well as lifting and transporting extremely large structural elements. These activities, to be performed within the NSC, will require large and sophisticated cranes. The article will focus on the unique design features of the MCS for the D and D activities. (authors)« less

Diet Shift and Its Impact on Foraging Behavior of Siberian Crane (Grus Leucogeranus) in Poyang Lake

PubMed Central

Jia, Yifei; Jiao, Shengwu; Zhang, Yamian; Zhou, Yan; Lei, Guangchun; Liu, Guanhua

2013-01-01

The study of habitat selection and diet has a long history in ecology. This is often used to assess the functional roles of wetland in biodiversity conservation. Shifting habitat and diet may be one of the survival strategies during extremely adverse conditions. Therefore, sudden changes in habitat selection may indicate the deterioration of the habitat quality, and management interventions are necessary. Siberian crane (Grus leucogeranus) became critically endangered due to loss of habitat, and is currently a global conservation focus. Every winter, more than 95% of the species' global population congregates at Poyang Lake, and feeds on tubers of Vallisneria spiralis in shallow water and mudflat habitat. In this study, we reported the first sighting of large numbers of Siberian cranes foraging at wet meadows, where they fed on a different plant, Potentilla limprichtii due to extreme scarcity of their preferred tuber. To understand how well the cranes adapted to such unusual habitat, field surveys to assess the distribution of cranes across different habitats, and food availability in each habitat were carried out in the winter of 2011. Field observations on crane behaviors at different habitats were also conducted. Results show that cranes displayed significantly different behavior patterns when using the wet meadow, compared to the crane's optimal habitat - shallow water and mudflat. Both juveniles and adults spent significantly less time foraging, and more time alerting in meadows than in shallow waters and mudflats. These results indicated that the meadow might be a suboptimal wintering ground for Siberian crane, which helped the cranes survive from extreme unfavorable conditions. To some degree, this finding alleviates the general concern over the fluctuating of its food resources which was caused by hydrological disturbances. However, more studies are needed to assess the consequences of such diet and habitat shift for crane survival. PMID:23823943

Diet Shift and Its Impact on Foraging Behavior of Siberian Crane (Grus Leucogeranus) in Poyang Lake.

PubMed

Jia, Yifei; Jiao, Shengwu; Zhang, Yamian; Zhou, Yan; Lei, Guangchun; Liu, Guanhua

2013-01-01

The study of habitat selection and diet has a long history in ecology. This is often used to assess the functional roles of wetland in biodiversity conservation. Shifting habitat and diet may be one of the survival strategies during extremely adverse conditions. Therefore, sudden changes in habitat selection may indicate the deterioration of the habitat quality, and management interventions are necessary. Siberian crane (Grus leucogeranus) became critically endangered due to loss of habitat, and is currently a global conservation focus. Every winter, more than 95% of the species' global population congregates at Poyang Lake, and feeds on tubers of Vallisneria spiralis in shallow water and mudflat habitat. In this study, we reported the first sighting of large numbers of Siberian cranes foraging at wet meadows, where they fed on a different plant, Potentilla limprichtii due to extreme scarcity of their preferred tuber. To understand how well the cranes adapted to such unusual habitat, field surveys to assess the distribution of cranes across different habitats, and food availability in each habitat were carried out in the winter of 2011. Field observations on crane behaviors at different habitats were also conducted. Results show that cranes displayed significantly different behavior patterns when using the wet meadow, compared to the crane's optimal habitat - shallow water and mudflat. Both juveniles and adults spent significantly less time foraging, and more time alerting in meadows than in shallow waters and mudflats. These results indicated that the meadow might be a suboptimal wintering ground for Siberian crane, which helped the cranes survive from extreme unfavorable conditions. To some degree, this finding alleviates the general concern over the fluctuating of its food resources which was caused by hydrological disturbances. However, more studies are needed to assess the consequences of such diet and habitat shift for crane survival.

PERSPECTIVE VIEW LOOKING SOUTHEAST OF THE SATURN I TEST. NOTE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PERSPECTIVE VIEW LOOKING SOUTHEAST OF THE SATURN I TEST. NOTE THE GANTRY CRANE USED TO MANEUVER ROCKETS INTO THE TEST STAND. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

The impact of the night float system on internal medicine residency programs.

PubMed

Trontell, M C; Carson, J L; Taragin, M I; Duff, A

1991-01-01

To study the design, method of implementation, perceived benefits, and problems associated with a night float system. Self-administered questionnaire completed by program directors, which included both structured and open-ended questions. The answers reflect resident and student opinions as well as those of the program directors, since program directors regularly obtain feedback from these groups. The 442 accredited internal medicine residency programs listed in the 1988-89 Directory of Graduate Medical Education Programs. Of the 442 programs, 79% responded, and 30% had experience with a night float system. The most frequent methods for initiating a night float system included: decreasing elective time (42.3%), hiring more residents (26.9%), creating a non-teaching service (12.5%), and reallocating housestaff time (9.6%). Positive effects cited include decreased fatigue, improved housestaff morale, improved recruiting, and better attitude toward internal medicine training. The quality of medical care was considered the same or better by most programs using it. The most commonly cited problems were decreased continuity of care, inadequate teaching of the night float team, and miscommunication. Residency programs using a night float system usually observe a positive effect on housestaff morale, recruitment, and working hours and no detrimental effect on the quality of patient care. Miscommunication and inadequate learning experience for the night float team are important potential problems. This survey suggests that the night float represents one solution to reducing resident working hours.

PLFA profiling of microbial community structure and seasonal shifts in soils of a Douglas-fir chronosequence

Treesearch

Jennifer Moore-Kucera; Richard P. Dick

2008-01-01

The impact and frequency of forest harvesting could significantly affect soil microbial community (SMC) structure and functioning. The ability of soil microorganisms to perform biogeochemical processes is critical for sustaining forest productivity and has a direct impact on decomposition dynamics and carbon storage potential. The Wind River Canopy Crane Research...

A Method for Estimating the Probability of Floating Gate Prompt Charge Loss in a Radiation Environment

NASA Technical Reports Server (NTRS)

Edmonds, L. D.

2016-01-01

Since advancing technology has been producing smaller structures in electronic circuits, the floating gates in modern flash memories are becoming susceptible to prompt charge loss from ionizing radiation environments found in space. A method for estimating the risk of a charge-loss event is given.

A Method for Estimating the Probability of Floating Gate Prompt Charge Loss in a Radiation Environment

NASA Technical Reports Server (NTRS)

Edmonds, L. D.

2016-01-01

Because advancing technology has been producing smaller structures in electronic circuits, the floating gates in modern flash memories are becoming susceptible to prompt charge loss from ionizing radiation environments found in space. A method for estimating the risk of a charge-loss event is given.

14 CFR 25.527 - Hull and main float load factors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float load factors. 25.527... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.527 Hull and main... 1=empirical hull station weighing factor, in accordance with figure 2 of appendix B. (7) r x=ratio...

Fatigue analysis of assembled marine floating platform for special purposes under complex water environments

NASA Astrophysics Data System (ADS)

Ma, Guang-ying; Yao, Yun-long

2018-03-01

In this paper, the fatigue lives of a new type of assembled marine floating platform for special purposes were studied. Firstly, by using ANSYS AQWA software, the hydrodynamic model of the platform was established. Secondly, the structural stresses under alternating change loads were calculated under complex water environments, such as wind, wave, current and ice. The minimum fatigue lives were obtained under different working conditions. The analysis results showed that the fatigue life of the platform structure can meet the requirements

FOUNDRY LANDSCAPE LOOKING SOUTHWEST FROM MALLEABLE STOCK YARD CRANE SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FOUNDRY LANDSCAPE LOOKING SOUTHWEST FROM MALLEABLE STOCK YARD CRANE SHOWING CRANE RAILS, GREY IRON CUPOLA AND EMISSION RECOVERY SYSTEM. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

Vertebral formula in red-crowned crane (Grus japonensis) and hooded crane (Grus monacha).

PubMed

Hiraga, Takeo; Sakamoto, Haruka; Nishikawa, Sayaka; Muneuchi, Ippei; Ueda, Hiromi; Inoue, Masako; Shimura, Ryoji; Uebayashi, Akiko; Yasuda, Nobuhiro; Momose, Kunikazu; Masatomi, Hiroyuki; Teraoka, Hiroki

2014-04-01

Red-crowned cranes (Grus japonensis) are distributed separately in the east Eurasian Continent (continental population) and in Hokkaido, Japan (island population). The island population is sedentary in eastern Hokkaido and has increased from a very small number of cranes to over 1,300, thus giving rise to the problem of poor genetic diversity. While, Hooded cranes (Grus monacha), which migrate from the east Eurasian Continent and winter mainly in Izumi, Kagoshima Prefecture, Japan, are about eight-time larger than the island population of Red-crowned cranes. We collected whole bodies of these two species, found dead or moribund in eastern Hokkaido and in Izumi, and observed skeletons with focus on vertebral formula. Numbers of cervical vertebrae (Cs), thoracic vertebrae (Ts), vertebrae composing the synsacrum (Sa) and free coccygeal vertebrae (free Cos) in 22 Red-crowned cranes were 17 or 18, 9-11, 13 or 14 and 7 or 8, respectively. Total number of vertebrae was 47, 48 or 49, and the vertebral formula was divided into three types including 9 sub-types. Numbers of Cs, Ts, vertebrae composing the Sa and free Cos in 25 Hooded cranes were 17 or 18, 9 or 10, 12-14 and 6-8, respectively. Total number of vertebrae was 46, 47, 48 or 49, and the vertebral formula was divided into four types including 14 sub-types. Our findings clearly showed various numerical vertebral patterns in both crane species; however, these variations in the vertebral formula may be unrelated to the genetic diversity.

COMPUTED TOMOGRAPHIC ANATOMY AND CHARACTERISTICS OF RESPIRATORY ASPERGILLOSIS IN JUVENILE WHOOPING CRANES

PubMed Central

Kelley, Cristin; Pinkerton, Marie E.; Hartup, Barry K.

2015-01-01

Respiratory diseases are a leading cause of morbidity and mortality in captivity reared, endangered whooping cranes (Grus americana). Objectives of this retrospective, case series, cross‐sectional study were to describe computed tomography (CT) respiratory anatomy in a juvenile whooping crane without respiratory disease, compare CT characteristics with gross pathologic characteristics in a group of juvenile whooping cranes with respiratory aspergillosis, and test associations between the number of CT tracheal bends and bird sex and age. A total of 10 juvenile whooping cranes (one control, nine affected) were included. Seven affected cranes had CT characteristics of unilateral extrapulmonary bronchial occlusion or wall thickening, and seven cranes had luminal occlusion of the intrapulmonary primary or secondary bronchi. Air sac membrane thickening was observed in three cranes in the cranial and caudal thoracic air sacs, and air sac diverticulum opacification was observed in four cranes. Necropsy lesions consisted of severe, subacute to chronic, focally extensive granulomatous pathology of the trachea, primary bronchi, lungs, or air sacs. No false positive CT scan results were documented. Seven instances of false negative CT scan results occurred; six of these consisted of subtle, mild air sacculitis including membrane opacification or thickening, or the presence of small plaques found at necropsy. The number of CT tracheal bends was associated with bird age but not sex. Findings supported the use of CT as a diagnostic test for avian species with respiratory disease and tracheal coiling or elongated tracheae where endoscopic evaluation is impractical. PMID:26592357

Customized overhead cranes for installation of India's largest 3.6m optical telescope at Devasthal, Nainital, India

NASA Astrophysics Data System (ADS)

Bangia, Tarun; Yadava, Shobhit; Kumar, Brijesh; Ghanti, A. S.; Hardikar, P. M.

2016-07-01

India's largest 3.6 m aperture optical telescope facility has been recently established at Devasthal site by Aryabhatta Research Institute of Observation Sciences (ARIES), an autonomous Institute under Department of Science and Technology, Government of India. The telescope is equipped with active optics and it is designed to be used for seeinglimited observations at visible and near-infrared wavelengths. A steel building with rotating cylindrical steel Dome was erected to house 3.6m telescope and its accessories at hilltop of Devasthal site. Customized cranes were essentially required inside the building as there were space constraints around the telescope building for operating big external heavy duty cranes from outside, transportation constraints in route for bringing heavy weight cranes, altitude of observatory, and sharp bends etc. to site. To meet the challenge of telescope installation from inside the telescope building by lifting components through its hatch, two Single Girder cranes and two Under Slung cranes of 10 MT capacity each were specifically designed and developed. All the four overhead cranes were custom built to achieve the goal of handling telescope mirror and its various components during installation and assembly. Overhead cranes were installed in limited available space inside the building and tested as per IS 3177. Cranes were equipped with many features like VVVFD compatibility, provision for tandem operation, digital load display, anti-collision mechanism, electrical interlocks, radio remote, low hook height and compact carriage etc. for telescope integration at site.

Results of the Utah-Arizona stage-by-stage migrations

USGS Publications Warehouse

Ellis, D.H.; Mellon, C.; Kinloch, M.; Dolbeare, T.; Ossi, D.P.

2001-01-01

In an effort to find a safer means of teaching cranes new migration routes, each year (in 1998 and 1999) we transported a group of greater sandhill cranes (Grus canadensis tabida) stage-by-stage, in a horse trailer, with stops for brief flights at about 30-km intervals, along a 1300-1400-km fall migration route from Fish Springs National Wildlife Refuge (Fish Springs) in west-central Utah to the vicinity of Gila Bend, Arizona. Thereafter, we released them into a wild flock of sandhill cranes. All stage-by-stage birds were hand-reared with both a plastic crane decoy (to encourage them to roost in water) and a costume-draped humanoid form (called a scare-eagle and used for its namesake purpose). When these 2 teaching aids were placed in water, our cranes readily roosted nearby. All but 4 of our cranes proved cooperative (i.e., catchable at each of the ca 25-36 stops) during the migration. All were efficiently released into a wild flock and experienced good survival. The stage-by-stage method proved to be a safe means of transporting cranes south and giving them experience along the route. Some cranes apparently learned their route from the limited experience afforded by releasing them at intervals, and the 1999 cranes have made repealed migrations to or near our chosen northern terminus. However, after 1 winter in our chosen area, the birds have moved elsewhere to winter.

Golden Eagle predation on experimental Sandhill and Whooping Cranes

USGS Publications Warehouse

Ellis, D.H.; Clegg, K.R.; Lewis, J.C.; Spaulding, E.

1999-01-01

There are very few published records of Golden Eagles preying upon cranes, especially in North America. During our experiments to lead cranes on migration behind motorized craft in the western United States, we experienced 15 attacks (four fatal) and believe many more attacks would have occurred (and more would have been fatal) without human intervention. We recognize eagle predation as an important risk to cranes especially during migration.

Nonhunting mortality in sandhill cranes

USGS Publications Warehouse

Windingstad, R.M.

1988-01-01

Records of 170 sandhill cranes (Grus canadensis) necropsied at the National Wildlife Health Research Center, Wisconsin, from 1976 through 1985 were reviewed as representative samples to determine causes of nonhunting mortality in the mid-continent and Rocky Mountain populations of sandhill cranes. Avian cholera, avian botulism, and ingestion of mycotoxins were leading causes of nonhunting mortality. Hailstorms, lightning, lead poisoning, predation, avian tuberculosis, and collisions with power lines also killed cranes.

Identification, inheritance, and linkage of B-G-like and MHC class I genes in cranes

USGS Publications Warehouse

Jarvi, S.I.; Goto, R.M.; Gee, G.F.; Briles, W.E.; Miller, M.M.

1999-01-01

We identified B-G-like genes in the whooping and Florida sandhill cranes and linked them to the major histocompatibility complex (MHC). We evaluated the inheritance of B-G-like genes in families of whooping and Florida sandhill cranes using restriction fragment patterns (RFPs). Two B-G-like genes, designated wcbgl and wcbg2, were located within 8 kb of one another. The fully sequenced wcbg2 gene encodes a B-G IgV-like domain, an additional Ig-like domain, a transmembrane domain, and a single heptad domain typical of '-helical coiled coils. Patterns of restriction fragments in DNA from the whooping crane and from a number of other species indicate that the B-G-like gene families of cranes are large with diverse sequences. Segregation of RFPs in families of Florida sandhill cranes provide evidence for genetic polymorphism in the B-G-like genes. The restriction fragments generally segregated in concert with MHC haplotypes assigned by serological typing and by single stranded conformational polymorphism (SSCP) assays based in the second exon of the crane MHC class I genes. This study supports the concept of a long-term association of polymorphic B-G-like genes with the MHC. It also establishes SSCP as a means for evaluating MHC genetic variability in cranes.

Motion Planning of Two Stacker Cranes in a Large-Scale Automated Storage/Retrieval System

NASA Astrophysics Data System (ADS)

Kung, Yiheng; Kobayashi, Yoshimasa; Higashi, Toshimitsu; Ota, Jun

We propose a method for reducing the computational time of motion planning for stacker cranes. Most automated storage/retrieval systems (AS/RSs) are only equipped with one stacker crane. However, this is logistically challenging, and greater work efficiency in warehouses, such as those using two stacker cranes, is required. In this paper, a warehouse with two stacker cranes working simultaneously is proposed. Unlike warehouses with only one crane, trajectory planning in those with two cranes is very difficult. Since there are two cranes working together, a proper trajectory must be considered to avoid collision. However, verifying collisions is complicated and requires a considerable amount of computational time. As transport work in AS/RSs occurs randomly, motion planning cannot be conducted in advance. Planning an appropriate trajectory within a restricted duration would be a difficult task. We thereby address the current problem of motion planning requiring extensive calculation time. As a solution, we propose a “free-step” to simplify the procedure of collision verification and reduce the computational time. On the other hand, we proposed a method to reschedule the order of collision verification in order to find an appropriate trajectory in less time. By the proposed method, we reduce the calculation time to less than 1/300 of that achieved in former research.

Identification, inheritance, and linkage of B-G-like and MHC class I genes in cranes.

PubMed

Jarvi, S I; Goto, R M; Gee, G F; Briles, W E; Miller, M M

1999-01-01

We identified B-G-like genes in the whooping and Florida sandhill cranes and linked them to the major histocompatibility complex (MHC). We evaluated the inheritance of B-G-like genes in families of whooping and Florida sandhill cranes using restriction fragment patterns (RFPs). Two B-G-like genes, designated wcbg1 and wcbg2, were located within 8 kb of one another. The fully sequenced wcbg2 gene encodes a B-G IgV-like domain, an additional Ig-like domain, a transmembrane domain, and a single heptad domain typical of alpha-helical coiled coils. Patterns of restriction fragments in DNA from the whooping crane and from a number of other species indicate that the B-G-like gene families of cranes are large with diverse sequences. Segregation of RFPs in families of Florida sandhill cranes provide evidence for genetic polymorphism in the B-G-like genes. The restriction fragments generally segregated in concert with MHC haplotypes assigned by serological typing and by single stranded conformational polymorphism (SSCP) assays based in the second exon of the crane MHC class I genes. This study supports the concept of a long-term association of polymorphic B-G-like genes with the MHC. It also establishes SSCP as a means for evaluating MHC genetic variability in cranes.

Agricultural producers' perceptions of sandhill cranes in the San Luis Valley of Colorado

USGS Publications Warehouse

Laubhan, M.K.; Gammonley, J.H.

2001-01-01

Management for migratory birds at an ecosystem scale requires forming cooperative partnerships with the private sector. To be effective, however, wildlife managers must understand the economic and social attitudes of private landowners to ensure that strategies involving stakeholders are viable and can be implemented. We documented attitudes of farmers in the San Luis Valley (SLV) of Colorado toward Rocky Mountain Population greater sandhill cranes (Grus canadensis tabida) using a self administered, mail-back survey. Overall response rate was 46.7%. Viewing sandhill cranes in the SLV was considered somewhat important or important by 78.6% of respondents. In contrast, only 62.1% of respondents indicated that viewing sandhill cranes was somewhat important or important on their own land. Farmers' attitudes toward viewing sandhill cranes on their own property were related (P=0.02) to perceived conflicts with crop production. The extent of crane use (P=0.04) was the only variable we tested that predicted whether conflicts were reported. Our results suggest that partnerships between farmers and natural resource agencies concerned with management of sandhill cranes may be viable. However, the role of farmers in any proposed management strategy must be examined carefully because there may be an upper limit of crane use on private land that farmers will tolerate.

Impact of Solar Array Position on ISS Vehicle Charging

NASA Technical Reports Server (NTRS)

Alred, John; Mikatarian, Ronald; Koontz, Steve

2006-01-01

The International Space Station (ISS), because of its large structure and high voltage solar arrays, has a complex plasma interaction with the ionosphere in low Earth orbit (LEO). This interaction of the ISS US Segment photovoltaic (PV) power system with the LEO ionospheric plasma produces floating potentials on conducting elements of the ISS structure relative to the local plasma environment. To control the ISS floating potentials, two Plasma Contactor Units (PCUs) are installed on the Z1 truss. Each PCU discharges accumulated electrons from the Space Station structure, thus reducing the potential difference between the ISS structure and the surrounding charged plasma environment. Operations of the PCUs were intended to keep the ISS floating potential to 40 Volts (Reference 1). Exposed dielectric surfaces overlying conducting structure on the Space Station will collect an opposite charge from the ionosphere as the ISS charges. In theory, when an Extravehicular Activity (EVA) crewmember is tethered to structure via the crew safety tether or when metallic surfaces of the Extravehicular Mobility Unit (EMU) come in contact with conducting metallic surfaces of the ISS, the EMU conducting components, including the perspiration-soaked crewmember inside, can become charged to the Space Station floating potential. The concern is the potential dielectric breakdown of anodized aluminum surfaces on the EMU producing an arc from the EMU to the ambient plasma, or nearby ISS structure. If the EMU arcs, an electrical current of an unknown magnitude and duration may conduct through the EVA crewmember, producing an unacceptable condition. This electrical current may be sufficient to startle or fatally shock the EVA crewmember (Reference 2). Hence, as currently defined by the EVA community, the ISS floating potential for all nominal and contingency EVA worksites and translation paths must have a magnitude less than 40 volts relative to the local ionosphere at all times during EVA. Arcing from the EMU is classified as a catastrophic hazard, which requires two-failure tolerant controls, i.e., three hazard controls. Each PCU is capable of maintaining the ISS floating potential below the requirement during EVA. The two PCUs provide a single failure tolerant control of ISS floating potential. In the event of the failure of one or two PCUs, a combination of solar array shunting and turning the solar arrays into their own wakes will be used to supply control of the plasma hazard (Reference 3). The purpose of this paper is to present on-orbit information that shows that ISS solar array placement with respect to the ISS velocity vector can control solar array plasma charging, and hence, provide an operational control for the plasma hazard. Also, this paper will present on-orbit information that shows that shunting of the ISS solar arrays can control solar array plasma charging, and hence, provide an additional operational control for the plasma hazard.

Karyotype and identification of sex in two endangered crane species

USGS Publications Warehouse

Goodpasture, C.; Seluja, G.; Gee, G.; Wood, Don A.

1992-01-01

A laboratory procedure for sex identification of monomorphic birds was developed using modern cytological methods of detecting chromosome abnormalities in human amniotic fluid samples. A pin feather is taken from a pre-fledging bird for tissue culture and karyotype analysis. Through this method, the sex was identified and the karyotype described of the whooping crane (Grus americana) and the Mississippi sandhill crane (G. canadensis pulla). Giemsa-stained karyotypes of these species showed an identical chromosome constitution with 2n = 78 + 2. However, differences in the amount of centromeric heterochromatin were observed in the Mississippi sandhill crane when compared to the whooping crane C-banded karyotype.

Development of performance specifications for hybrid modeling of floating wind turbines in wave basin tests

DOE PAGES

Hall, Matthew; Goupee, Andrew; Jonkman, Jason

2017-08-24

Hybrid modeling—combining physical testing and numerical simulation in real time$-$opens new opportunities in floating wind turbine research. Wave basin testing is an important validation step for floating support structure design, but the conventional approaches that use physical wind above the basin are limited by scaling problems in the aerodynamics. Applying wind turbine loads with an actuation system that is controlled by a simulation responding to the basin test in real time offers a way to avoid scaling problems and reduce cost barriers for floating wind turbine design validation in realistic coupled wind and wave conditions. This paper demonstrates the developmentmore » of performance specifications for a system that couples a wave basin experiment with a wind turbine simulation. Two different points for the hybrid coupling are considered: the tower-base interface and the aero-rotor interface (the boundary between aerodynamics and the rotor structure). Analyzing simulations of three floating wind turbine designs across seven load cases reveals the motion and force requirements of the coupling system. By simulating errors in the hybrid coupling system, the sensitivity of the floating wind turbine response to coupling quality can be quantified. The sensitivity results can then be used to determine tolerances for motion tracking errors, force actuation errors, bandwidth limitations, and latency in the hybrid coupling system. These tolerances can guide the design of hybrid coupling systems to achieve desired levels of accuracy. An example demonstrates how the developed methods can be used to generate performance specifications for a system at 1:50 scale. Results show that sensitivities vary significantly between support structure designs and that coupling at the aero-rotor interface has less stringent requirements than those for coupling at the tower base. As a result, the methods and results presented here can inform design of future hybrid coupling systems and enhance understanding of how test results are affected by hybrid coupling quality.« less

Development of performance specifications for hybrid modeling of floating wind turbines in wave basin tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, Matthew; Goupee, Andrew; Jonkman, Jason

Hybrid modeling—combining physical testing and numerical simulation in real time$-$opens new opportunities in floating wind turbine research. Wave basin testing is an important validation step for floating support structure design, but the conventional approaches that use physical wind above the basin are limited by scaling problems in the aerodynamics. Applying wind turbine loads with an actuation system that is controlled by a simulation responding to the basin test in real time offers a way to avoid scaling problems and reduce cost barriers for floating wind turbine design validation in realistic coupled wind and wave conditions. This paper demonstrates the developmentmore » of performance specifications for a system that couples a wave basin experiment with a wind turbine simulation. Two different points for the hybrid coupling are considered: the tower-base interface and the aero-rotor interface (the boundary between aerodynamics and the rotor structure). Analyzing simulations of three floating wind turbine designs across seven load cases reveals the motion and force requirements of the coupling system. By simulating errors in the hybrid coupling system, the sensitivity of the floating wind turbine response to coupling quality can be quantified. The sensitivity results can then be used to determine tolerances for motion tracking errors, force actuation errors, bandwidth limitations, and latency in the hybrid coupling system. These tolerances can guide the design of hybrid coupling systems to achieve desired levels of accuracy. An example demonstrates how the developed methods can be used to generate performance specifications for a system at 1:50 scale. Results show that sensitivities vary significantly between support structure designs and that coupling at the aero-rotor interface has less stringent requirements than those for coupling at the tower base. As a result, the methods and results presented here can inform design of future hybrid coupling systems and enhance understanding of how test results are affected by hybrid coupling quality.« less

Crane 55 at Drydock No. 2. View includes entire bone. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Crane 55 at Drydock No. 2. View includes entire bone. Building 43 is in background - Puget Sound Naval Shipyard, Portal Gantry Crane No. 55, Central Industrial Area, Farragut Avenue, Bremerton, Kitsap County, WA

Fecal corticosterone reflects serum corticosterone in Florida sandhill cranes.

PubMed

Ludders, J W; Langenberg, J A; Czekala, N M; Erb, H N

2001-07-01

Florida sandhill cranes (Grus canadensis pratensis) were conditioned to confinement 6 hr/day for 7 days. On day 8, each bird's jugular vein was catheterized, blood samples were drawn, and each crane was confined for 6 hr. Using a randomized, restricted cross-over design, cranes were injected intravenously with either 0.9% NaCl solution or ACTH (cosyntropin; Cortrosyn; 0.25 mg). During the 6 hr of confinement, fecal samples (feces and urine) were collected from each of five cranes immediately after defecation. Individual fecal samples were collected approximately at hourly intervals and assayed for corticosterone. We showed previously that serum corticosterone did not vary significantly following saline injection, but peaked significantly 60 min after ACTH injection. Maximal fecal corticosterone concentrations (ng/g) were greater (P < 0.10; median 1087 ng/g) following ACTH stimulation compared to maximal fecal corticosterone concentrations at the end of acclimation (day 7; median 176) and following saline treatment (median 541). In cranes under controlled conditions, fecal corticosterone concentration reflects serum corticosterone levels, fecal corticosterone, Grus canadensis pratensis, sandhill cranes, serum corticosterone levels.

Comparative assessment of anti-sway control strategy for tower crane system

NASA Astrophysics Data System (ADS)

Samin, Reza Ezuan; Mohamed, Zaharuddin

2017-09-01

Tower crane is also known as rotary crane and widely used in constructions due to limited human capability to carry the various types of load at the construction site. In general crane is used for the purpose of loading and unloading heavy material from one place to another. However, in order to transfer the material in minimum time from one location to another, swaying of the payload will occur. Hence, this research presents the investigation of tower crane system which mainly focusing on the swaying angle of the payload by implementing conventional and intelligent controllers. Its mathematical modeling is developed using the Newton's Second Law and simulation is done within the MATLAB/Simulink environment. Simulation results are presented in cart trajectory capability and payload sway angle reduction. A comparative assessment between conventional controller and intelligent controller for the tower crane system are presented and discussed. Furthermore, the effect of various rope length and payload mass of the tower crane system to the performance of trajectory capability and sway angle reduction are also presented and discussed.

Floating assembly of diatom Coscinodiscus sp. microshells.

PubMed

Wang, Yu; Pan, Junfeng; Cai, Jun; Zhang, Deyuan

2012-03-30

Diatoms have silica frustules with transparent and delicate micro/nano scale structures, two dimensional pore arrays, and large surface areas. Although, the diatom cells of Coscinodiscus sp. live underwater, we found that their valves can float on water and assemble together. Experiments show that the convex shape and the 40 nm sieve pores of the valves allow them to float on water, and that the buoyancy and the micro-range attractive forces cause the valves to assemble together at the highest point of water. As measured by AFM calibrated glass needles fixed in manipulator, the buoyancy force on a single floating valve may reach up to 10 μN in water. Turning the valves over, enlarging the sieve pores, reducing the surface tension of water, or vacuum pumping may cause the floating valves to sink. After the water has evaporated, the floating valves remained in their assembled state and formed a monolayer film. The bonded diatom monolayer may be valuable in studies on diatom based optical devices, biosensors, solar cells, and batteries, to better use the optical and adsorption properties of frustules. The floating assembly phenomenon can also be used as a self-assembly method for fabricating monolayer of circular plates. Copyright © 2012 Elsevier Inc. All rights reserved.

Unique and massive Chernobyl cranes for deconstruction activities in the new safe confinement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parameswaran, N. A. Vijay; Chornyy, Igor; Owen, Rob

2013-07-01

On 26 April 1986, the worst nuclear power plant accident in history occurred at the Chernobyl plant in Ukraine (then part of the Soviet Union). The destruction of Unit 4 sent highly radioactive fallout over Belarus, Russia, Ukraine, and Europe. The object shelter-a containment sarcophagus-was built in November 1986 to limit exposure to radiation. However, it has only a planned 25-year lifespan and would probably not survive even a moderate seismic event in a region that has more than its share of such events. It was time to take action. One of the largest tasks that are in progress ismore » the design and construction of the New Safe Confinement (NSC). The NSC is an engineered enclosure for the entire object shelter that includes a suite of process equipment. The process equipment will be used for the dismantling of the destroyed Chernobyl Nuclear Power Plant Unit. One of the major mechanical handling systems to be installed in the new safe confinement is the Main Cranes System. The planned decontamination and decommissioning or dismantling activities will require the handling of heavily shielded waste disposal casks containing nuclear fuel as well as lifting and transporting extremely large structural elements. These activities, to be performed within the new safe confinement, will require large and sophisticated cranes. The article will focus on the current progress of the new safe confinement and of the main cranes system for the decommissioning or dismantling activities. (authors)« less

Impacting load control of floating supported friction plate and its experimental verification

NASA Astrophysics Data System (ADS)

Ning, Keyan; Wang, Yu; Huang, Dingchuan; Yin, Lei

2017-05-01

Friction plates are key components in automobile transmission system. Unfortunately, due to the tough working condition i.e. high impact, high temperature, fracture and plastic deformation are easily observed in friction plates. In order to reduce the impact load and increase the impact resistance and life span of the friction plate. This paper presents a variable damping design method and structure, by punching holes in the key position of the friction plate and filling it with damping materials, the impact load of the floating support friction plate can be controlled. Simulation is applied to study the effect of the position and number of damping holes on tooth root stress. Furthermore, physic test was designed and conducted to validate the correctness and effectiveness of the proposed method. Test result shows that the impact load of the new structure is reduced by 40% and its fatigue life is 4.7 times larger. The new structure provides a new way for floating supported friction plates design.

FOUNDRY LANDSCAPE LOOKING WESTNORTHWEST FROM MALLEABLE STOCK YARD CRANE, SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FOUNDRY LANDSCAPE LOOKING WEST-NORTHWEST FROM MALLEABLE STOCK YARD CRANE, SHOWING CRANE MOTOR AND MALLEABLE CUPOLAS WITH OPEN TOPS AND EMISSION RECOVERY DUCTS. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

A Self-Powered Fast-Sampling Profiling Float in support of a Mesoscale Ocean Observing System in the Western North Pacific

NASA Astrophysics Data System (ADS)

Valdez, T.; Chao, Y.; Davis, R. E.; Jones, J.

2012-12-01

This talk will describe a new self-powered profiling float that can perform fast sampling over the upper ocean for long durations in support of a mesoscale ocean observing system in the Western North Pacific. The current state-of-the-art profiling floats can provide several hundreds profiles for the upper ocean every ten days. To quantify the role of the upper ocean in modulating the development of Typhoons requires at least an order of magnitude reduction for the sampling interval. With today's profiling float and battery technology, a fast sampling of one day or even a few hours will reduce the typical lifetime of profiling floats from years to months. Interactions between the ocean and typhoons often involves mesoscale eddies and fronts, which require a dense array of floats to reveal the 3-dimensional structure. To measure the mesoscale ocean over a large area like the Western North Pacific therefore requires a new technology that enables fast sampling and long duration at the same time. Harvesting the ocean renewable energy associated with the vertical temperature differentials has the potential to power profiling floats with fast sampling over long durations. Results from the development and deployment of a prototype self-powered profiling float (known as SOLO-TREC) will be presented. With eight hours sampling in the upper 500 meters, the upper ocean temperature and salinity reveal pronounced high frequency variations. Plans to use the SOLO-TREC technology in support of a dense array of fast sampling profiling floats in the Western North Pacific will be discussed.

Compendium of crane behavior. Part 1: Individual (nonsocial) behavior

USGS Publications Warehouse

Ellis, D.H.; Archibald, George W.; Swengel, S.R.; Kepler, C.B.; Harris, James

1991-01-01

This paper provides the organizational framework, nomenclature, and abbreviated descriptions for all conspicuous nonsocial behavioral units for all 15 species of crane. We present eight generalized functional classes of behavior. These classes include about 90 discrete motor patterns that constitute the nonsocial repertoire of all cranes. We present this compendium to facilitate information exchanges among students of crane behavior and to encourage interest in future detailed studies of the descriptive ethology of each species.

Conceptual design of a multiple cable crane for planetary surface operations

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.; Yang, Li-Farn

1991-01-01

A preliminary design study is presented of a mobile crane suitable for conducting remote, automated construction operations on planetary surfaces. A cursory study was made of earth based mobile cranes and the needs for major improvements were identified. Current earth based cranes have a single cable supporting the payload, and precision positioning is accomplished by the use of construction workers controlling the payload by the use of tethers. For remote, autonomous operations on planetary surfaces it will be necessary to perform the precision operations without the use of humans. To accomplish this the payload must be stabilized relative to the crane. One approach for accomplishing this is to suspend the payload on multiple cable. A 3-cable suspension system crane concept is discussed. An analysis of the natural frequency of the system is presented which verifies the legitimacy of the concept.

Impacts of invasive plants on Sandhill Crane (Grus canadensis) roosting habitat

USGS Publications Warehouse

Kessler, Andrew C.; Merchant, James W.; Allen, Craig R.; Shultz, Steven D.

2011-01-01

Invasive plants continue to spread in riparian ecosystems, causing both ecological and economic damage. This research investigated the impacts of common reed, purple loosestrife, riparian shrubland, and riparian woodlands on the quality and quantity of sandhill crane roosting habitat in the central Platte River, Nebraska, using a discrete choice model. A more detailed investigation of the impacts of common reed on sandhill crane roosting habitat was performed by forecasting a spread or contraction of this invasive plant. The discrete choice model indicates that riparian woodlands had the largest negative impact on sandhill crane roosting habitat. The forecasting results predict that a contraction of common reed could increase sandhill crane habitat availability by 50%, whereas an expansion could reduce the availability by as much as 250%. This suggests that if the distribution of common reed continues to expand in the central Platte River the availability of sandhill crane roosting habitat would likely be greatly reduced.

Effects of high-temperature gas dealkalization on surface mechanical properties of float glass

NASA Astrophysics Data System (ADS)

Senturk, Ufuk

The surface topography, and the near-surface structure and mechanical property changes on float glass, that was treated in atmospheres containing SOsb2, HCl, and 1,1 difluoroethane (DFE) gases, at temperatures in the glass transition region, were studied. Structure was investigated using surface sensitive infrared spectroscopy techniques (attenuated total reflectance (ATR) and diffuse reflectance (DRIFT)) and the topography was evaluated using atomic force microscopy (AFM). The results obtained from the two FTIR methods were in agreement with each other. Mechanical property characteristics of the surface were determined by measuring microhardness using a recording microindentation set-up. A simple analysis performed on the three hardness calculation methods-LVH, LVHsb2, and Lsb2VH-indicated that LVH and LVHsb2 are less effected by measurement errors and are better suited for the calculation of hardness. Contact damage characteristics of the treated glass was also studied by monitoring the crack initiation behavior during indentation, using acoustic emission. The results of the studies, aiming for the understanding of the structure, topography, and hardness property changes indicate that the treatment parameters-temperature, time, and treatment atmosphere conditions-are significant factors influencing these properties. The analysis of these results suggest a relation to exist between the three properties. This relation is used in understanding the surface mechanical properties of the treated float glasses. The difference in the thermal expansion coefficients between the dealkalized surface and bulk, the nature of surface structure changes, structural relaxation, surface water content, and glass transformation temperature are identified as the major factors having an influence on the properties. A model connecting these features is suggested. A difference in the structure, hardness, and topography on the air and tin sides of float glass is also shown to exist. The contact damage behavior of the treated surfaces is shown to differ from those of untreated surfaces, for SOsb2-treated float glass, where the crack initiation characteristics indicate crack formation from the surface and the indenter tip, different than the expected anomalous deformation. This behavior resembles that of a silica glass deformation on the surface, which is in agreement with the other foundations in this study.

COMPUTED TOMOGRAPHIC ANATOMY AND CHARACTERISTICS OF RESPIRATORY ASPERGILLOSIS IN JUVENILE WHOOPING CRANES.

PubMed

Schwarz, Tobias; Kelley, Cristin; Pinkerton, Marie E; Hartup, Barry K

2016-01-01

Respiratory diseases are a leading cause of morbidity and mortality in captivity reared, endangered whooping cranes (Grus americana). Objectives of this retrospective, case series, cross-sectional study were to describe computed tomography (CT) respiratory anatomy in a juvenile whooping crane without respiratory disease, compare CT characteristics with gross pathologic characteristics in a group of juvenile whooping cranes with respiratory aspergillosis, and test associations between the number of CT tracheal bends and bird sex and age. A total of 10 juvenile whooping cranes (one control, nine affected) were included. Seven affected cranes had CT characteristics of unilateral extrapulmonary bronchial occlusion or wall thickening, and seven cranes had luminal occlusion of the intrapulmonary primary or secondary bronchi. Air sac membrane thickening was observed in three cranes in the cranial and caudal thoracic air sacs, and air sac diverticulum opacification was observed in four cranes. Necropsy lesions consisted of severe, subacute to chronic, focally extensive granulomatous pathology of the trachea, primary bronchi, lungs, or air sacs. No false positive CT scan results were documented. Seven instances of false negative CT scan results occurred; six of these consisted of subtle, mild air sacculitis including membrane opacification or thickening, or the presence of small plaques found at necropsy. The number of CT tracheal bends was associated with bird age but not sex. Findings supported the use of CT as a diagnostic test for avian species with respiratory disease and tracheal coiling or elongated tracheae where endoscopic evaluation is impractical. © 2015 The Authors. Veterinary Radiology & Ultrasound published by Wiley Periodicals, Inc. on behalf of American College of Veterinary Radiology.

Vertebral Formula in Red-Crowned Crane (Grus japonensis) and Hooded Crane (Grus monacha)

PubMed Central

HIRAGA, Takeo; SAKAMOTO, Haruka; NISHIKAWA, Sayaka; MUNEUCHI, Ippei; UEDA, Hiromi; INOUE, Masako; SHIMURA, Ryoji; UEBAYASHI, Akiko; YASUDA, Nobuhiro; MOMOSE, Kunikazu; MASATOMI, Hiroyuki; TERAOKA, Hiroki

2013-01-01

ABSTRACT Red-crowned cranes (Grus japonensis) are distributed separately in the east Eurasian Continent (continental population) and in Hokkaido, Japan (island population). The island population is sedentary in eastern Hokkaido and has increased from a very small number of cranes to over 1,300, thus giving rise to the problem of poor genetic diversity. While, Hooded cranes (Grus monacha), which migrate from the east Eurasian Continent and winter mainly in Izumi, Kagoshima Prefecture, Japan, are about eight-time larger than the island population of Red-crowned cranes. We collected whole bodies of these two species, found dead or moribund in eastern Hokkaido and in Izumi, and observed skeletons with focus on vertebral formula. Numbers of cervical vertebrae (Cs), thoracic vertebrae (Ts), vertebrae composing the synsacrum (Sa) and free coccygeal vertebrae (free Cos) in 22 Red-crowned cranes were 17 or 18, 9–11, 13 or 14 and 7 or 8, respectively. Total number of vertebrae was 47, 48 or 49, and the vertebral formula was divided into three types including 9 sub-types. Numbers of Cs, Ts, vertebrae composing the Sa and free Cos in 25 Hooded cranes were 17 or 18, 9 or 10, 12–14 and 6–8, respectively. Total number of vertebrae was 46, 47, 48 or 49, and the vertebral formula was divided into four types including 14 sub-types. Our findings clearly showed various numerical vertebral patterns in both crane species; however, these variations in the vertebral formula may be unrelated to the genetic diversity. PMID:24334828

Motion performance and mooring system of a floating offshore wind turbine

NASA Astrophysics Data System (ADS)

Zhao, Jing; Zhang, Liang; Wu, Haitao

2012-09-01

The development of offshore wind farms was originally carried out in shallow water areas with fixed (seabed mounted) structures. However, countries with limited shallow water areas require innovative floating platforms to deploy wind turbines offshore in order to harness wind energy to generate electricity in deep seas. The performances of motion and mooring system dynamics are vital to designing a cost effective and durable floating platform. This paper describes a numerical model to simulate dynamic behavior of a new semi-submersible type floating offshore wind turbine (FOWT) system. The wind turbine was modeled as a wind block with a certain thrust coefficient, and the hydrodynamics and mooring system dynamics of the platform were calculated by SESAM software. The effect of change in environmental conditions on the dynamic response of the system under wave and wind loading was examined. The results indicate that the semi-submersible concept has excellent performance and SESAM could be an effective tool for floating wind turbine design and analysis.

33 CFR 165.838 - Regulated Navigation Area; Gulf Intracoastal Waterway, Inner Harbor Navigation Canal, New Orleans...

Code of Federal Regulations, 2014 CFR

2014-07-01

... before closure of the navigational structures, all floating vessels must depart the RNA except as follows... Harbor Navigation Canal, New Orleans, LA. (a) Location. The following is a regulated navigation area (RNA... West of Harvey Locks (WHL) (b) Definitions. As used in this section: (1) Breakaway means a floating...

77 FR 44434 - Airworthiness Directives; Various Restricted Category Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-30

... Erickson Air-Crane Co.); California Department of Forestry; Garlick Helicopters, Inc.; Global Helicopter... Helicopter Services (previously Erickson Air-Crane Co.); California Department of Forestry; Garlick... Helicopter Services (previously Erickson Air-Crane Co.); California Department of Forestry; Garlick...

Salmonella enteritidis and Arizona hinshawii isolated from wild sandhill cranes

USGS Publications Warehouse

Windingstad, R.M.; Trainer, D.O.; Duncan, R.M.

1977-01-01

Salmonella enteritidis serotype Rubislaw and Arizona hinshawii were isolated from cloacal swabs of "healthy" live-trapped sandhill cranes (Grus canadensis tabida) in Indiana and Wisconsin. These respective isolations were the first reported from wild sandhill cranes.

On the nature of control algorithms for free-floating space manipulators

NASA Technical Reports Server (NTRS)

Papadopoulos, Evangelos; Dubowsky, Steven

1991-01-01

It is suggested that nearly any control algorithm that can be used for fixed-based manipulators also can be employed in the control of free-floating space manipulator systems, with the additional conditions of estimating or measuring a spacecraft's orientation and of avoiding dynamic singularities. This result is based on the structural similarities between the kinematic and dynamic equations for the same manipulator but with a fixed base. Barycenters are used to formulate the kinematic and dynamic equations of free-floating space manipulators. A control algorithm for a space manipulator system is designed to demonstrate the value of the analysis.

Case report: inclusion body disease of cranes: a serological follow-up to the 1978 die-off

USGS Publications Warehouse

Docherty, D.E.; Romaine, Renee I.

1983-01-01

A herpesvirus was isolated from captive cranes involved in a 1978 die-off. Neutralizing antibody to this virus was detected in this captive population as early as 1975 and consistently thereafter through 1979. Exposure to the virus evidently occurred at least 2 1/2 years before the die-off, without causing any mortality diagnosed as being caused by inclusion body disease of cranes (IBDC). Overcrowding and environmental conditions in 1978 may have contributed to the deaths of certain species of cranes in one area and not in another. Mortality ratios and serological data suggest that crane species vary in their response to IBDC virus.

Fusarium spp. recovered from waste peanuts associated with sandhill crane mortality

USGS Publications Warehouse

Nelson, P.E.; Cole, R.J.; Tousson, T.A.; Dorner, J.W.; Windingstad, R.M.

1990-01-01

Approximately 5000 sandhill cranes (Grus canadensis ) died from undetermined causes in Gains County, Texas, 1985, and an additional 200 died in 1986. Prominent clinical signs were the inability of many sick cranes to hold their necks horizontal and the neck, head, and legs sometimes drooped perpendicularly during flight. Approximately 95% of the dead cranes' gizzards contained peanuts. Culturing of peanuts, shells, soil and soil debris from fields in which sandhill cranes died showed that Fusarium species were the fungi most frequently isolated and eight species were recovered from these substrates. Fusarium compactum, F. solani , and F. equiseti were the only species recovered from all substrates cultured from both fields.

Aluminum Manganese Molten Salt Plating

DTIC Science & Technology

2006-06-01

fixture from overhead crane hook and locate fixture over the closed acid tank. 2. Ventilation a. Set valve positions as follows (same as Section I.4.a...overhead crane hook and position the fixture over the closed acid tank. (Will need to remove the top stainless steel rod, clasp the remaining rod with the... crane hook , replace the rod that was removed by threading it through the crane hook , and finally lift the fixture off its storage hook . The cotter

SURVEY OF GROSS AND HISTOPATHOLOGIC FINDINGS IN TWO WINTERING SUBPOPULATIONS OF SANDHILL CRANES ( ANTIGONE CANADENSIS).

PubMed

Hensel, Martha; Bertram, Miranda; Rech, Raquel; Hamer, Gabriel L; Hamer, Sarah A

2018-01-01

:  Sandhill Cranes ( Antigone canadensis) of the midcontinent population (MCP) and Rocky Mountain population (RMP) are migratory game birds with stable populations that travel between Canada and the southern US and Mexico. In the winters of 2012-14, we performed gross and histologic examinations of 43 hunter-harvested Sandhill Cranes in Texas (MCP) and New Mexico (RMP) to assess the impact of disease on populations. Lesions were significantly more common in the MCP relative to the RMP, likely reflecting differential environmental exposure to pathogens and parasites. Grossly, liver nodules and esophageal granulomas were present in 8-39% of birds. In feces from over half of birds, we found coccidian oocysts with mitochondrial gene sequences identical to those of Eimeria gruis and Eimeria reichenowi previously obtained from sympatric Whooping Cranes ( Grus americana). Over one-quarter of birds had liver and cardiac lesions suggestive of disseminated visceral coccidiosis. We documented proliferative colitis due to Cryptosporidium in a wild Sandhill Crane. Additionally, several endoparasites were found in histologic sections from several cranes, including a bird with respiratory trematodiasis and two birds with Tetrameres sp. in the proventriculus associated with ductal ectasia. In addition to describing lesions and parasites that impact Sandhill Crane health, these pathology data may also be relevant for the conservation of endangered Whooping Cranes using a surrogate species approach.

Comprehensive and Highly Accurate Measurements of Crane Runways, Profiles and Fastenings

PubMed Central

Dennig, Dirk; Bureick, Johannes; Link, Johannes; Diener, Dmitri; Hesse, Christian; Neumann, Ingo

2017-01-01

The process of surveying crane runways has been continually refined due to the competitive situation, modern surveying instruments, additional sensors, accessories and evaluation procedures. Guidelines, such as the International Organization for Standardization (ISO) 12488-1, define target values that must be determined by survey. For a crane runway these are for example the span, the position and height of the rails. The process has to be objective and reproducible. However, common processes of surveying crane runways do not meet these requirements sufficiently. The evaluation of the protocols, ideally by an expert, requires many years of experience. Additionally, the recording of crucial parameters, e.g., the wear of the rail, or the condition of the rail fastening and rail joints, is not regulated and for that reason are often not considered during the measurement. To solve this deficit the Advanced Rail Track Inspection System (ARTIS) was developed. ARTIS is used to measure the 3D position of crane rails, the cross-section of the crane rails, joints and, for the first time, the (crane-rail) fastenings. The system consists of a monitoring vehicle and an external tracking sensor. It makes kinematic observations with the tracking sensor from outside the rail run, e.g., the floor of an overhead crane runway, possible. In this paper we present stages of the development process of ARTIS, new target values, calibration of sensors and results of a test measurement. PMID:28505076

WindWaveFloat (WWF): Final Scientific Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alla Weinstein; Roddier, Dominique; Banister, Kevin

2012-03-30

Principle Power Inc. and National Renewable Energy Lab (NREL) have completed a contract to assess the technical and economic feasibility of integrating wave energy converters into the WindFloat, resulting in a new concept called the WindWaveFloat (WWF). The concentration of several devices on one platform could offer a potential for both economic and operational advantages. Wind and wave energy converters can share the electrical cable and power transfer equipment to transport the electricity to shore. Access to multiple generation devices could be simplified, resulting in cost saving at the operational level. Overall capital costs may also be reduced, provided thatmore » the design of the foundation can be adapted to multiple devices with minimum modifications. Finally, the WindWaveFloat confers the ability to increase energy production from individual floating support structures, potentially leading to a reduction in levelized energy costs, an increase in the overall capacity factor, and greater stability of the electrical power delivered to the grid. The research conducted under this grant investigated the integration of several wave energy device types into the WindFloat platform. Several of the resulting system designs demonstrated technical feasibility, but the size and design constraints of the wave energy converters (technical and economic) make the WindWaveFloat concept economically unfeasible at this time. Not enough additional generation could be produced to make the additional expense associated with wave energy conversion integration into the WindFloat worthwhile.« less

Timing of spring surveys for midcontinent sandhill cranes

USGS Publications Warehouse

Pearse, Aaron T.; Krapu, Gary L.; Brandt, David A.; Sargeant, Glen A.

2015-01-01

The U.S. Fish and Wildlife Service has used spring aerial surveys to estimate numbers of migrating sandhill cranes (Grus canadensis) staging in the Platte River Valley of Nebraska, USA. Resulting estimates index the abundance of the midcontinent sandhill crane population and inform harvest management decisions. However, annual changes in the index have exceeded biologically plausible changes in population size (>50% of surveys between 1982 and 2013 indicate >±20% change), raising questions about nuisance variation due to factors such as migration chronology. We used locations of cranes marked with very-high-frequency transmitters to estimate migration chronology (i.e., proportions of cranes present within the Platte River Valley). We also used roadside surveys to determine the percentage of cranes staging at the Platte River Valley but outside of the survey area when surveys occur. During March 2001–2007, an average of 86% (71–94%; SD = 7%) of marked cranes were present along the Platte River during scheduled survey dates, and 0–11% of cranes that were present along the Platte River were not within the survey boundaries. Timing of the annual survey generally corresponded with presence of the greatest proportion of marked cranes and with least inter-annual variation; consequently, accuracy of estimates could not have been improved by surveying on different dates. Conducting the survey earlier would miss birds not yet arriving at the staging site; whereas, a later date would occur at a time when a larger portion of birds may have already departed the staging site and when a greater proportion of birds occurred outside of the surveyed area. Index values used to monitor midcontinent sandhill crane abundance vary annually, in part, due to annual variation in migration chronology and to spatial distribution of cranes in the Platte River Valley; therefore, managers should interpret survey results cautiously, with awareness of a continuing need to identify and understand components of variation. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

29 CFR 1926.1400 - Scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... also excluded when used with chains, slings or other rigging to lift suspended loads. (3) Automotive... metal, steel, or other material), prefabricated building sections such as, but not limited to: Floor... the crane is a structural steel member (for example, steel joists, beams, columns, steel decking...

Spatiotemporal patterns in community structure of macroinvertebrates inhabiting calcareous periphyton mats

USGS Publications Warehouse

Liston, S.E.; Trexler, J.C.

2005-01-01

Calcareous floating periphyton mats in the southern Everglades provide habitat for a diverse macroinvertebrate community that has not been well characterized. Our study described this community in an oligotrophic marsh, compared it with the macroinvertebrate community associated with adjacent epiphytic algae attached to macrophytes in the water column, and detected spatial patterns in density and community structure. The floating periphyton mat (floating mat) and epiphytic algae in the water column (submerged epiphyton) were sampled at 4 sites (???1 km apart) in northern Shark River Slough, Everglades National Park (ENP), in the early (July) and late (November) wet season. Two perpendicular 90-m transects were established at each site and ???100 samples were taken in a nested design. Sites were located in wet-prairie spikerush-dominated sloughs with similar water depths and emergent macrophyte communities. Floating mats were sampled by taking cores (6-cm diameter) that were sorted under magnification to enumerate infauna retained on a 250-??m-mesh sieve and with a maximum dimension >1 mm. Our results showed that floating mats provide habitat for a macroinvertebrate community with higher densities (no. animals/g ash-free dry mass) of Hyalella azteca, Dasyhelea spp., and Cladocera, and lower densities of Chironomidae and Planorbella spp. than communities associated with submerged epiphyton. Densities of the most common taxa increased 3x to 15x from early to late wet season, and community differences between the 2 habitat types became more pronounced. Floating-mat coverage and estimated floating-mat biomass increased 20 to 30%, and 30 to 110%, respectively, at most sites in the late wet season. Some intersite variation was observed in individual taxa, but no consistent spatial pattern in any taxon was detected at any scale (from 0.2 m to 3 km). Floating mats and their resident macroinvertebrate communities are important components in the Everglades food web. This community should be included in environmental monitoring programs because degradation and eventual loss of the calcareous periphyton mat is associated with P enrichment in this ecosystem. ?? 2005 by The North American Benthological Society.

Space Shuttle Discovery rolls out to the launch pad

NASA Technical Reports Server (NTRS)

1999-01-01

Space Shuttle Discovery sits on Launch Pad 39B against a backdrop of blue sky and the blue-green Atlantic Ocean. At the top left is the 290-foot-high water tank that holds 300,000 gallons of water for the sound suppression system during liftoff. At the bottom, on the Rotating Service Structure, is photographer John Sexton, taking photos for a book. Liftoff of Discovery on mission STS-96 is targeted for May 20 at 9:32 a.m. EDT. STS-96 is a logistics and resupply mission for the International Space Station, carrying such payloads as a Russian crane, the Strela; a U.S.- built crane; the Spacehab Oceaneering Space System Box (SHOSS), a logistics items carrier; and STARSHINE, a student-led experiment.

KSC-99pp0437

NASA Image and Video Library

1999-04-26

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery sits on Launch Pad 39B against a backdrop of blue sky and the blue-green Atlantic Ocean. At the top left is the 290-foot-high water tank that holds 300,000 gallons of water for the sound suppression system during liftoff. At the bottom, on the Rotating Service Structure, is photographer John Sexton, taking photos for a book. Liftoff of Discovery on mission STS-96 is targeted for May 20 at 9:32 a.m. EDT. STS-96 is a logistics and resupply mission for the International Space Station, carrying such payloads as a Russian crane, the Strela; a U.S.-built crane; the Spacehab Oceaneering Space System Box (SHOSS), a logistics items carrier; and STARSHINE, a student-led experiment

Deflection of Resilient Materials for Reduction of Floor Impact Sound

PubMed Central

Lee, Jung-Yoon; Kim, Jong-Mun

2014-01-01

Recently, many residents living in apartment buildings in Korea have been bothered by noise coming from the houses above. In order to reduce noise pollution, communities are increasingly imposing bylaws, including the limitation of floor impact sound, minimum thickness of floors, and floor soundproofing solutions. This research effort focused specifically on the deflection of resilient materials in the floor sound insulation systems of apartment houses. The experimental program involved conducting twenty-seven material tests and ten sound insulation floating concrete floor specimens. Two main parameters were considered in the experimental investigation: the seven types of resilient materials and the location of the loading point. The structural behavior of sound insulation floor floating was predicted using the Winkler method. The experimental and analytical results indicated that the cracking strength of the floating concrete floor significantly increased with increasing the tangent modulus of resilient material. The deflection of the floating concrete floor loaded at the side of the specimen was much greater than that of the floating concrete floor loaded at the center of the specimen. The Winkler model considering the effect of modulus of resilient materials was able to accurately predict the cracking strength of the floating concrete floor. PMID:25574491

Deflection of resilient materials for reduction of floor impact sound.

PubMed

Lee, Jung-Yoon; Kim, Jong-Mun

2014-01-01

Recently, many residents living in apartment buildings in Korea have been bothered by noise coming from the houses above. In order to reduce noise pollution, communities are increasingly imposing bylaws, including the limitation of floor impact sound, minimum thickness of floors, and floor soundproofing solutions. This research effort focused specifically on the deflection of resilient materials in the floor sound insulation systems of apartment houses. The experimental program involved conducting twenty-seven material tests and ten sound insulation floating concrete floor specimens. Two main parameters were considered in the experimental investigation: the seven types of resilient materials and the location of the loading point. The structural behavior of sound insulation floor floating was predicted using the Winkler method. The experimental and analytical results indicated that the cracking strength of the floating concrete floor significantly increased with increasing the tangent modulus of resilient material. The deflection of the floating concrete floor loaded at the side of the specimen was much greater than that of the floating concrete floor loaded at the center of the specimen. The Winkler model considering the effect of modulus of resilient materials was able to accurately predict the cracking strength of the floating concrete floor.

Decision analysis for conservation breeding: Maximizing production for reintroduction of whooping cranes

USGS Publications Warehouse

Smith, Des H.V.; Converse, Sarah J.; Gibson, Keith; Moehrenschlager, Axel; Link, William A.; Olsen, Glenn H.; Maguire, Kelly

2011-01-01

Captive breeding is key to management of severely endangered species, but maximizing captive production can be challenging because of poor knowledge of species breeding biology and the complexity of evaluating different management options. In the face of uncertainty and complexity, decision-analytic approaches can be used to identify optimal management options for maximizing captive production. Building decision-analytic models requires iterations of model conception, data analysis, model building and evaluation, identification of remaining uncertainty, further research and monitoring to reduce uncertainty, and integration of new data into the model. We initiated such a process to maximize captive production of the whooping crane (Grus americana), the world's most endangered crane, which is managed through captive breeding and reintroduction. We collected 15 years of captive breeding data from 3 institutions and used Bayesian analysis and model selection to identify predictors of whooping crane hatching success. The strongest predictor, and that with clear management relevance, was incubation environment. The incubation period of whooping crane eggs is split across two environments: crane nests and artificial incubators. Although artificial incubators are useful for allowing breeding pairs to produce multiple clutches, our results indicate that crane incubation is most effective at promoting hatching success. Hatching probability increased the longer an egg spent in a crane nest, from 40% hatching probability for eggs receiving 1 day of crane incubation to 95% for those receiving 30 days (time incubated in each environment varied independently of total incubation period). Because birds will lay fewer eggs when they are incubating longer, a tradeoff exists between the number of clutches produced and egg hatching probability. We developed a decision-analytic model that estimated 16 to be the optimal number of days of crane incubation needed to maximize the number of offspring produced. These results show that using decision-analytic tools to account for uncertainty in captive breeding can improve the rate at which such programs contribute to wildlife reintroductions. 

Moored offshore structures - evaluation of forces in elastic mooring lines

NASA Astrophysics Data System (ADS)

Crudu, L.; Obreja, D. C.; Marcu, O.

2016-08-01

In most situations, the high frequency motions of the floating structure induce important effects in the mooring lines which affect also the motions of the structure. The experience accumulated during systematic experimental tests and calculations, carried out for different moored floating structures, showed a complex influence of various parameters on the dynamic effects. Therefore, it was considered that a systematic investigation is necessary. Due to the complexity of hydrodynamics aspects of offshore structures behaviour, experimental tests are practically compulsory in order to be able to properly evaluate and then to validate their behaviour in real sea. Moreover the necessity to carry out hydrodynamic tests is often required by customers, classification societies and other regulatory bodies. Consequently, the correct simulation of physical properties of the complex scaled models becomes a very important issue. The paper is investigating such kind of problems identifying the possible simplification, generating different approaches. One of the bases of the evaluation has been found consideringtheresults of systematic experimental tests on the dynamic behaviour of a mooring chain reproduced at five different scales. Dynamic effects as well as the influences of the elasticity simulation for 5 different scales are evaluated together. The paper presents systematic diagrams and practical results for a typical moored floating structure operating as pipe layer based on motion evaluations and accelerations in waves.

Cranes in East Asia; Proceedings of the symposium held in Harbin, People's Republic of China, June 9-18, 1998

USGS Publications Warehouse

Johnson, Richard L.; Hongfei, Zou; Stendell, Rey C.

2001-01-01

Introductory Remarks (R.C. Stendell): I appreciate the opportunity to be in Harbin and participate in the International Scientific Workshop on Cranes in East Asia. I would like to provide some background information on how this meeting came to be. Almost one year ago, in July 1997, Dr. Kun John of the Seoul National University contacted the U.S. Geological Survey’s Midcontinent Ecological Science Center (MESC) requesting that we host a meeting of scientists from the Republic of Korea (ROK) and the Democratic People’s Republic of Korea (DPRK) to discuss the biology and ecology of cranes on the Korean peninsula. Dr. John and his colleagues expressed concern about three species of cranes that migrate up and down the Korean peninsula and use the Demilitarized Zone. The species of interest are the Red-crowned Crane, White-naped Crane, and the Hooded Crane. The primary question was the conservation of these species in this part of the world. Another concern involved exploring potential economic values and opportunities associated with these species. Richard Johnson, an economist at MESC, assumed responsibility as the primary MESC contact to help bring about this meeting.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deserts, L. des

To develop hydrocarbon fields located in deep waters, several alternatives can be contemplated. Among these alternatives, some of them use surface wellheads while others use subsea wells; some alternatives are using bottom founded structures, while others use floating structures or a combination of both. The purpose of this paper is to try to assess when a compliant tower will be the most appropriate solution to consider. To make this assessment, the different types of compliant towers are recalled, as well as the different types of floating structures. Then some criteria are introduced to compare the different alternatives and to determinemore » when a compliant tower is the most appropriate solution.« less

1T Pixel Using Floating-Body MOSFET for CMOS Image Sensors.

PubMed

Lu, Guo-Neng; Tournier, Arnaud; Roy, François; Deschamps, Benoît

2009-01-01

We present a single-transistor pixel for CMOS image sensors (CIS). It is a floating-body MOSFET structure, which is used as photo-sensing device and source-follower transistor, and can be controlled to store and evacuate charges. Our investigation into this 1T pixel structure includes modeling to obtain analytical description of conversion gain. Model validation has been done by comparing theoretical predictions and experimental results. On the other hand, the 1T pixel structure has been implemented in different configurations, including rectangular-gate and ring-gate designs, and variations of oxidation parameters for the fabrication process. The pixel characteristics are presented and discussed.

Considering transient population dynamics in the conservation of slow life-history species: An application to the sandhill crane

USGS Publications Warehouse

Gerber, Brian D.; Kendall, William L.

2016-01-01

The importance of transient dynamics of structured populations is increasingly recognized in ecology, yet these implications are not largely considered in conservation practices. We investigate transient and long-term population dynamics to demonstrate the process and utility of incorporating transient dynamics into conservation research and to better understand the population management of slow life-history species; these species can be theoretically highly sensitive to short- and long-term transient effects. We are specifically interested in the effects of anthropogenic removal of individuals from populations, such as caused by harvest, poaching, translocation, or incidental take. We use the sandhill crane (Grus canadensis) as an exemplar species; it is long-lived, has low reproduction, late maturity, and multiple populations are subject to sport harvest. We found sandhill cranes to have extremely high potential, but low likelihood for transient dynamics, even when the population is being harvested. The typically low population growth rate of slow life-history species appears to buffer against many perturbations causing large transient effects. Transient dynamics will dominate population trajectories of these species when stage structures are highly biased towards the younger and non-reproducing individuals, a situation that may be rare in established populations of long-lived animals. However, short-term transient population growth can be highly sensitive to vital rates that are relatively insensitive under equilibrium, suggesting that stage structure should be known if perturbation analysis is used to identify effective conservation strategies. For populations of slow life-history species that are not prone to large perturbations to their most productive individuals, population growth may be approximated by equilibrium dynamics.

Design and implementation of the ESL compact range underhung bridge crane

NASA Technical Reports Server (NTRS)

Shamansky, H. T.; Dominek, A. K.; Burnside, W. D.

1987-01-01

As the indoor compact range technology has continued to increase, the need to handle larger and heavier targets has also increased. This need for target lifting and handling prompted the feasibility study of the use of an underhung bridge crane to be installed in the ESL (ElectroScience Laboratory, Ohio State University) compact range. This report documents both the design of the underhung bridge crane that was installed and the implementation of the design in the actual installation of the crane.

Rotating shielded crane system

DOEpatents

Commander, John C.

1988-01-01

A rotating, radiation shielded crane system for use in a high radiation test cell, comprises a radiation shielding wall, a cylindrical ceiling made of radiation shielding material and a rotatable crane disposed above the ceiling. The ceiling rests on an annular ledge intergrally attached to the inner surface of the shielding wall. Removable plugs in the ceiling provide access for the crane from the top of the ceiling into the test cell. A seal is provided at the interface between the inner surface of the shielding wall and the ceiling.

New summer areas and mixing of two greater sandhill crane populations in the Intermountain West

USGS Publications Warehouse

Collins, Daniel P.; Grisham, Blake A.; Conring, Courtenay M.; Knetter, Jeffrey M.; Conway, Warren C.; Carleton, Scott A.; Boggie, Matthew A.

2016-01-01

Population delineation throughout the annual life cycle for migratory birds is needed to formulate regional and national management and conservation strategies. Despite being well studied continentally, connectivity of sandhill crane Grus canadensis populations throughout the western portion of their North American range remains poorly described. Our objectives were to 1) use global positioning system satellite transmitter terminals to identify summer distributions for the Lower Colorado River Valley Population of greater sandhill cranes Grus canadensis tabida and 2) determine whether intermingling occurs among any of the western greater sandhill crane populations: Rocky Mountain Population, Lower Colorado River Valley Population, and Central Valley Population. Capture and marking occurred during winter and summer on private lands in California and Idaho as well as on two National Wildlife Refuges: Cibola and Sonny Bono Salton Sea National Wildlife Refuges. A majority of marked greater sandhill cranes summered in what is established Lower Colorado River Valley Population breeding areas in northeastern Nevada and southwestern Idaho. A handful of greater sandhill cranes summered outside of traditional breeding areas in west-central Idaho around Cascade Reservoir near Donnelly and Cascade, Idaho. For example, a greater sandhill crane colt captured near Donnelly in July 2014 survived to winter migration and moved south to areas associated with the Rocky Mountain Population. The integration of the greater sandhill crane colt captured near Donnelly provides the first evidence of potential intermingling between the Lower Colorado River Population and Rocky Mountain Population. We suggest continued marking and banding efforts of all three western populations of greater sandhill cranes will accurately delineate population boundaries and connectivity and inform management decisions for the three populations.

Development of Measurement Device of Working Radius of Crane Based on Single CCD Camera and Laser Range Finder

NASA Astrophysics Data System (ADS)

Nara, Shunsuke; Takahashi, Satoru

In this paper, what we want to do is to develop an observation device to measure the working radius of a crane truck. The device has a single CCD camera, a laser range finder and two AC servo motors. First, in order to measure the working radius, we need to consider algorithm of a crane hook recognition. Then, we attach the cross mark on the crane hook. Namely, instead of the crane hook, we try to recognize the cross mark. Further, for the observation device, we construct PI control system with an extended Kalman filter to track the moving cross mark. Through experiments, we show the usefulness of our device including new control system of mark tracking.

Beach macro-litter monitoring and floating microplastic in a coastal area of Indonesia.

PubMed

Syakti, Agung Dhamar; Bouhroum, Rafika; Hidayati, Nuning Vita; Koenawan, Chandra Joei; Boulkamh, Abdelaziz; Sulistyo, Isdy; Lebarillier, Stephanie; Akhlus, Syafsir; Doumenq, Pierre; Wong-Wah-Chung, Pascal

2017-09-15

Qualitative analysis of the structures of the polymers composing floating plastic debris was performed using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and the aging of the debris was assessed by measuring carbonyl group formation on the particle surfaces. Plastic material made up >75% of the 2313 items collected during a three-year survey. The size, shape and color of the microplastic were correlated with the polymer structure. The most abundant plastic materials were polypropylene (68%) and low-density polyethylene (11%), and the predominant colors of the plastics were white, blue and green. Cilacap Bay, Indonesia, was contaminated with microplastic at a concentration of 2.5mg·m 3 . The carbonyl index demonstrated that most of the floating microplastic was only slightly degraded. This study highlights the need to raise environmental awareness through citizen science education and adopting good environmental practices. Copyright © 2017 Elsevier Ltd. All rights reserved.

An energy-optimal solution for transportation control of cranes with double pendulum dynamics: Design and experiments

NASA Astrophysics Data System (ADS)

Sun, Ning; Wu, Yiming; Chen, He; Fang, Yongchun

2018-03-01

Underactuated cranes play an important role in modern industry. Specifically, in most situations of practical applications, crane systems exhibit significant double pendulum characteristics, which makes the control problem quite challenging. Moreover, most existing planners/controllers obtained with standard methods/techniques for double pendulum cranes cannot minimize the energy consumption when fulfilling the transportation tasks. Therefore, from a practical perspective, this paper proposes an energy-optimal solution for transportation control of double pendulum cranes. By applying the presented approach, the transportation objective, including fast trolley positioning and swing elimination, is achieved with minimized energy consumption, and the residual oscillations are suppressed effectively with all the state constrains being satisfied during the entire transportation process. As far as we know, this is the first energy-optimal solution for transportation control of underactuated double pendulum cranes with various state and control constraints. Hardware experimental results are included to verify the effectiveness of the proposed approach, whose superior performance is reflected by being experimentally compared with some comparative controllers.

Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments.

PubMed

Spasojević Brkić, Vesna K; Veljković, Zorica A; Golubović, Tamara; Brkić, Aleksandar Dj; Kosić Šotić, Ivana

2016-01-01

Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data and provide additional recommendations for design. In this paper, dimensioning of the crane cabin interior space was carried out using a sample of 64 crane operators' anthropometric measurements, in the Republic of Serbia, by measuring workspace with 10 parameters using nine measured anthropometric data from each crane operator. This paper applies experiments run via full factorial designs using a combined traditional and Taguchi approach. The experiments indicated which design parameters are influenced by which anthropometric measurements and to what degree. The results are expected to be of use for crane cabin designers and should assist them to design a cabin that may lead to less strenuous sitting postures and fatigue for operators, thus improving safety and accident prevention.

Effects of Instructional Support within Constructivist Learning Environments for Elementary School Students' Understanding of "Floating and Sinking"

ERIC Educational Resources Information Center

Hardy, Ilonca; Jonen, Angela; Moller, Komelia; Stern, Elsbeth

2006-01-01

In a repeated measures design (pretest, posttest, 1-year follow-up) with 161 3rd-grade students, the authors compared 2 curricula on floating and sinking within constructivist learning environments, varying in instructional support. The 2 curricula differed in the sequencing of content and the teacher's cognitively structuring statements. At the…

Generation of three-dimensional multiple spheroid model of olfactory ensheathing cells using floating liquid marbles

PubMed Central

Vadivelu, Raja K.; Ooi, Chin H.; Yao, Rebecca-Qing; Tello Velasquez, Johana; Pastrana, Erika; Diaz-Nido, Javier; Lim, Filip; Ekberg, Jenny A. K.; Nguyen, Nam-Trung; St John, James A.

2015-01-01

We describe a novel protocol for three-dimensional culturing of olfactory ensheathing cells (OECs), which can be used to understand how OECs interact with other cells in three dimensions. Transplantation of OECs is being trialled for repair of the paralysed spinal cord, with promising but variable results and thus the therapy needs improving. To date, studies of OEC behaviour in a multicellular environment have been hampered by the lack of suitable three-dimensional cell culture models. Here, we exploit the floating liquid marble, a liquid droplet coated with hydrophobic powder and placed on a liquid bath. The presence of the liquid bath increases the humidity and minimises the effect of evaporation. Floating liquid marbles allow the OECs to freely associate and interact to produce OEC spheroids with uniform shapes and sizes. In contrast, a sessile liquid marble on a solid surface suffers from evaporation and the cells aggregate with irregular shapes. We used floating liquid marbles to co-culture OECs with Schwann cells and astrocytes which formed natural structures without the confines of gels or bounding layers. This protocol can be used to determine how OECs and other cell types associate and interact while forming complex cell structures. PMID:26462469

Generation of three-dimensional multiple spheroid model of olfactory ensheathing cells using floating liquid marbles

NASA Astrophysics Data System (ADS)

Vadivelu, Raja K.; Ooi, Chin H.; Yao, Rebecca-Qing; Tello Velasquez, Johana; Pastrana, Erika; Diaz-Nido, Javier; Lim, Filip; Ekberg, Jenny A. K.; Nguyen, Nam-Trung; St John, James A.

2015-10-01

We describe a novel protocol for three-dimensional culturing of olfactory ensheathing cells (OECs), which can be used to understand how OECs interact with other cells in three dimensions. Transplantation of OECs is being trialled for repair of the paralysed spinal cord, with promising but variable results and thus the therapy needs improving. To date, studies of OEC behaviour in a multicellular environment have been hampered by the lack of suitable three-dimensional cell culture models. Here, we exploit the floating liquid marble, a liquid droplet coated with hydrophobic powder and placed on a liquid bath. The presence of the liquid bath increases the humidity and minimises the effect of evaporation. Floating liquid marbles allow the OECs to freely associate and interact to produce OEC spheroids with uniform shapes and sizes. In contrast, a sessile liquid marble on a solid surface suffers from evaporation and the cells aggregate with irregular shapes. We used floating liquid marbles to co-culture OECs with Schwann cells and astrocytes which formed natural structures without the confines of gels or bounding layers. This protocol can be used to determine how OECs and other cell types associate and interact while forming complex cell structures.

29 CFR 1926.1400 - Scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... loads. (3) Automotive wreckers and tow trucks when used to clear wrecks and haul vehicles. (4) Digger... metal, steel, or other material), prefabricated building sections such as, but not limited to: Floor... the crane is a structural steel member (for example, steel joists, beams, columns, steel decking...

Around Marshall

NASA Image and Video Library

1962-03-31

At its founding, the Marshall Space Flight Center (MSFC) inherited the Army’s Jupiter and Redstone test stands, but much larger facilities were needed for the giant stages of the Saturn V. From 1960 to 1964, the existing stands were remodeled and a sizable new test area was developed. The new comprehensive test complex for propulsion and structural dynamics was unique within the nation and the free world, and they remain so today because they were constructed with foresight to meet the future as well as on going needs. Construction of the S-IC Static test stand complex began in 1961 in the west test area of MSFC, and was completed in 1964. The S-IC static test stand was designed to develop and test the 138-ft long and 33-ft diameter Saturn V S-IC first stage, or booster stage, weighing in at 280,000 pounds. Required to hold down the brute force of a 7,500,000-pound thrust produced by 5 F-1 engines, the S-IC static test stand was designed and constructed with the strength of hundreds of tons of steel and 12,000,000 pounds of cement, planted down to bedrock 40 feet below ground level. The foundation walls, constructed with concrete and steel, are 4 feet thick. The base structure consists of four towers with 40-foot-thick walls extending upward 144 feet above ground level. The structure was topped by a crane with a 135-foot boom. With the boom in the upright position, the stand was given an overall height of 405 feet, placing it among the highest structures in Alabama at the time. Construction of the S-IC test stand came to a halt at the end of September 1961 as the determination was made that the Saturn booster size had to be increased. As a result, the stand had to be modified. With construction about to resume, portable, floating pump stations were placed in the site to drain the flood waters caused by a disturbed natural spring months prior during excavation. In this March 31, 1962 photo, the foundation walls can once again be seen.

Around Marshall

NASA Image and Video Library

1962-03-20

At its founding, the Marshall Space Flight Center (MSFC) inherited the Army’s Jupiter and Redstone test stands, but much larger facilities were needed for the giant stages of the Saturn V. From 1960 to 1964, the existing stands were remodeled and a sizable new test area was developed. The new comprehensive test complex for propulsion and structural dynamics was unique within the nation and the free world, and they remain so today because they were constructed with foresight to meet the future as well as on going needs. Construction of the S-IC Static test stand complex began in 1961 in the west test area of MSFC, and was completed in 1964. The S-IC static test stand was designed to develop and test the 138-ft long and 33-ft diameter Saturn V S-IC first stage, or booster stage, weighing in at 280,000 pounds. Required to hold down the brute force of a 7,500,000-pound thrust produced by 5 F-1 engines, the S-IC static test stand was designed and constructed with the strength of hundreds of tons of steel and 12,000,000 pounds of cement, planted down to bedrock 40 feet below ground level. The foundation walls, constructed with concrete and steel, are 4 feet thick. The base structure consists of four towers with 40-foot-thick walls extending upward 144 feet above ground level. The structure was topped by a crane with a 135-foot boom. With the boom in the upright position, the stand was given an overall height of 405 feet, placing it among the highest structures in Alabama at the time. Construction of the S-IC test stand came to a halt at the end of September as the determination was made that the Saturn booster size had to be increased. As a result, the stand had to be modified. With construction about to resume, portable floating pump stations were placed in the site, as seen in this March 20, 1962 photo, to drain the flood waters caused by a disturbed natural spring months prior during excavation.

Archive eggs: a research and management tool for avian conservation breeding

USGS Publications Warehouse

Smith, Des H.V.; Moehrenschlager, Axel; Christensen, Nancy; Knapik, Dwight; Gibson, Keith; Converse, Sarah J.

2012-01-01

Worldwide, approximately 168 bird species are captive-bred for reintroduction into the wild. Programs tend to be initiated for species with a high level of endangerment. Depressed hatching success can be a problem for such programs and has been linked to artificial incubation. The need for artificial incubation is driven by the practice of multiclutching to increase egg production or by uncertainty over the incubation abilities of captive birds. There has been little attempt to determine how artificial incubation differs from bird-contact incubation. We describe a novel archive (data-logger) egg and use it to compare temperature, humidity, and egg-turning in 5 whooping crane (Grus americana) nests, 4 sandhill crane (G. canadensis) nests, and 3 models of artificial incubator; each of which are used to incubate eggs in whooping crane captive-breeding programs. Mean incubation temperature was 31.7° C for whooping cranes and 32.83° C for sandhill cranes. This is well below that of the artificial incubators (which were set based on a protocol of 37.6° C). Humidity in crane nests varied considerably, but median humidity in all 3 artificial incubators was substantially different from that in the crane nests. Two artificial incubators failed to turn the eggs in a way that mimicked crane egg-turning. Archive eggs are an effective tool for guiding the management of avian conservation breeding programs, and can be custom-made for other species. They also have potential to be applied to research on wild populations.

Investigation on sense of control parameters for joystick interface in remote operated container crane application

NASA Astrophysics Data System (ADS)

Abdullah, U. N. N.; Handroos, H.

2017-09-01

Introduction: This paper presents the study of sense of control parameters to improve the lack of direct motion feeling through remote operated container crane station (ROCCS) joystick interface. The investigations of the parameters in this study are important to develop the engineering parameters related to the sense of control goal in the next design process. Methodology: Structured interviews and observations were conducted to obtain the user experience data from thirteen remote container crane operators from two international terminals. Then, interview analysis, task analysis, activity analysis and time line analysis were conducted to compare and contrast the results from interviews and observations. Results: Four experience parameters were identified to support the sense of control goal in the later design improvement of the ROCC joystick interface. The significance of difficulties to control, unsynchronized movements, facilitate in control and decision making in unexpected situation as parameters to the sense of control goal were validated by' feedbacks from operators as well as analysis. Contribution: This study provides feedback directly from end users towards developing a sustainable control interface for ROCCS in specific and remote operated off-road vehicles in general.

46 CFR 107.258 - Crane certification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

46 CFR 107.258 - Crane certification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

46 CFR 107.258 - Crane certification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

46 CFR 107.258 - Crane certification.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

46 CFR 107.258 - Crane certification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

29 CFR 1926.1415 - Safety devices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1415... this subpart, unless otherwise specified: (1) Crane level indicator. (i) The equipment must have a crane level indicator that is either built into the equipment or is available on the equipment. (ii) If...

29 CFR 1926.1416 - Operational aids.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1416...)(2), and (e)(3) of this section do not apply to articulating cranes. (2) The requirements in... paragraphs (d) and (e) of this section. More protective alternative measures specified by the crane/derrick...

78 FR 65163 - Airworthiness Directives; Sikorsky Aircraft Corporation-Manufactured (Sikorsky) Model Helicopters...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... Certificate Currently Held by Erickson Air-Crane Incorporated) AGENCY: Federal Aviation Administration (FAA... Erickson Air-Crane Incorporated (Erickson)). AD 97-19-10 required inspecting and reworking the main gearbox... service information identified in this AD, contact Erickson Air-Crane Incorporated, ATTN: Chris Erickson...

Crane and Excavator Operator.

ERIC Educational Resources Information Center

Marine Corps Inst., Washington, DC.

Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on crane and excavator operation is designed to enable the crane and excavator operator to perform his/her duties more proficiently. Introductory materials include specific information for MCI students, a course introduction, and a study guide…

VIEW OF CRANE LOADING AND UNLOADING AREA OF FUEL STORAGE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF CRANE LOADING AND UNLOADING AREA OF FUEL STORAGE BUILDING (CPP-603). PHOTO TAKEN LOOKING NORTH. INL PHOTO NUMBER HD-54-17-4. Mike Crane, Photographer, 8/2005 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

VIEW OF CRANE LOADING AND UNLOADING AREA OF FUEL STORAGE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF CRANE LOADING AND UNLOADING AREA OF FUEL STORAGE BUILDING (CPP-603). PHOTO TAKEN LOOKING SOUTH. INL PHOTO NUMBER HD-54-17-1. Mike Crane, Photographer, 8/2005 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

STOCK YARD LOOKING SOUTHEAST SHOWING OVERHEAD YARD CRANE RAIL, THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

STOCK YARD LOOKING SOUTHEAST SHOWING OVERHEAD YARD CRANE RAIL, THE MALLEABLE CUPOLAS AND EMISSION RECOVERY SYSTEM, OLD SHED ROOF THAT COVERED THE EARLIER MALLEABLE CUPOLA CHARGING CRANE, MALLEABLE FOUNDRY, AND POLLUTION CONTROL BAGHOUSE. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

An alternate and reversible method for flight restraint of cranes.

PubMed

Zhang, Sen Lin; Yang, Shu Hui; Li, Bing; Xu, Yan Chun; Ma, Jian Hua; Xu, Jian Feng; Zhang, Xian Guang

2011-01-01

Flight restraint is important for zoos, safaris, and breeding centers for large birds. Currently used techniques for flight restraint include both surgical and non-surgical approaches. Surgical approaches usually cause permanent change to or removal of tendon, patagial membrane, or wing bones, and can cause pain and inflammation. Non-surgical approaches such as clipping or trimming feathers often alter the bird's appearance, and can damage growing blood feathers in fledglings or cause joint stiffness. We observed microstructure of primary feathers of the red-crowned crane (Grus japonensis) and found that the width of barbs is a determinative factor influencing vane stiffness and geometric parameters. We hypothesized that partial longitudinal excision of barbs on the ventral surface of the primary feathers would reduce the stiffness of the vane and render the feathers unable to support the crane's body weight during flight. Furthermore, we hypothesized that this modification of barbs would also change the aerodynamic performance of feathers such that they could not generate sufficient lift and thrust during flapping to enable the bird to fly. We tested this hypothesis on a red-crowned crane that had normal flight capability by excising the ventral margin of barbs on all 10 primaries on the left wing. The bird was unable to take off until the modified feathers were replaced by new ones. Removal of barbs proved to be a simple, non-invasive, low-cost and reversible method for flight restraint. It is potentially applicable to other large birds with similar structural characteristics of primary feathers. © 2010 Wiley-Liss, Inc.

Validation test of advanced technology for IPV nickel-hydrogen flight cells: Update

NASA Technical Reports Server (NTRS)

Smithrick, John J.; Hall, Stephen W.

1992-01-01

Individual pressure vessel (IPV) nickel-hydrogen technology was advanced at NASA Lewis and under Lewis contracts with the intention of improving cycle life and performance. One advancement was to use 26 percent potassium hydroxide (KOH) electrolyte to improve cycle life. Another advancement was to modify the state-of-the-art cell design to eliminate identified failure modes. The modified design is referred to as the advanced design. A breakthrough in the low-earth-orbit (LEO) cycle life of IPV nickel-hydrogen cells has been previously reported. The cycle life of boiler plate cells containing 26 percent KOH electrolyte was about 40,000 LEO cycles compared to 3,500 cycles for cells containing 31 percent KOH. The boiler plate test results are in the process of being validated using flight hardware and real time LEO testing at the Naval Weapons Support Center (NWSC), Crane, Indiana under a NASA Lewis Contract. An advanced 125 Ah IPV nickel-hydrogen cell was designed. The primary function of the advanced cell is to store and deliver energy for long-term, LEO spacecraft missions. The new features of this design are: (1) use of 26 percent rather than 31 percent KOH electrolyte; (2) use of a patented catalyzed wall wick; (3) use of serrated-edge separators to facilitate gaseous oxygen and hydrogen flow within the cell, while still maintaining physical contact with the wall wick for electrolyte management; and (4) use of a floating rather than a fixed stack (state-of-the-art) to accommodate nickel electrode expansion due to charge/discharge cycling. The significant improvements resulting from these innovations are: extended cycle life; enhanced thermal, electrolyte, and oxygen management; and accommodation of nickel electrode expansion. The advanced cell design is in the process of being validated using real time LEO cycle life testing of NWSC, Crane, Indiana. An update of validation test results confirming this technology is presented.

A records system for a captive crane flock

USGS Publications Warehouse

Ellis, D.H.; Hartman, L.; Hereford, Scott G.; McMillen, J.L.; Harris, James

1991-01-01

Crane record keeping systems have been evolving at the Patuxent Wildlife Research Center (PWRC) since 1966 and at the International Crane Foundation (ICF) since 1974. The system we present here, a hybrid of the two systems, has been reorganized to promote easy access of information and to limit redundancy.

46 CFR 107.309 - Crane plans and information.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

46 CFR 107.260 - Rated load test for cranes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

46 CFR 107.309 - Crane plans and information.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

46 CFR 107.309 - Crane plans and information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

46 CFR 107.260 - Rated load test for cranes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

46 CFR 107.260 - Rated load test for cranes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

46 CFR 107.259 - Crane inspection and testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

46 CFR 107.260 - Rated load test for cranes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

46 CFR 107.259 - Crane inspection and testing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

46 CFR 107.259 - Crane inspection and testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

46 CFR 107.259 - Crane inspection and testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

46 CFR 107.259 - Crane inspection and testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

46 CFR 107.309 - Crane plans and information.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

46 CFR 107.260 - Rated load test for cranes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

46 CFR 107.309 - Crane plans and information.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

29 CFR 1915.115 - Hoisting and hauling equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... this section shall apply to ship repairing, shipbuilding and shipbreaking. (a) Derrick and crane certification. (1) Derricks and cranes which are part of, or regularly placed aboard barges, other vessels, or... equipment shall be guarded. (c) Mobile crawler or truck cranes used on a vessel. (1) The maximum...

29 CFR 1919.72 - Annual examination of cranes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Annual examination of cranes. 1919.72 Section 1919.72 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... examination of cranes. (a) In any year in which no quadrennial unit proof test is required, an examination...

78 FR 15599 - Airworthiness Directives; Sikorsky Aircraft-Manufactured Model S-64F Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

... Erickson Air-Crane Incorporated (Erickson) Model S-64F type certificate. This AD supersedes an existing AD..., contact Erickson Air-Crane Incorporated, ATTN: Chris Erickson/Compliance Officer, 3100 Willow Springs Rd... Sikorsky Aircraft Corporation-manufactured Model S-64F helicopters, now under the Erickson Air-Crane...

29 CFR 1915.115 - Hoisting and hauling equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... this section shall apply to ship repairing, shipbuilding and shipbreaking. (a) Derrick and crane certification. (1) Derricks and cranes which are part of, or regularly placed aboard barges, other vessels, or... equipment shall be guarded. (c) Mobile crawler or truck cranes used on a vessel. (1) The maximum...

29 CFR 1919.72 - Annual examination of cranes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Annual examination of cranes. 1919.72 Section 1919.72 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... examination of cranes. (a) In any year in which no quadrennial unit proof test is required, an examination...

A space crane concept for performing on-orbit assembly

NASA Technical Reports Server (NTRS)

Dorsey, John T.

1992-01-01

The topics are presented in viewgraph form and include: in-space assembly and construction enhances future mission planning flexibility; in-space assembly and construction facility concept; space crane concept with mobile base; fundamental characteristics; space crane research approach; spacecraft component positioning and assembly test-bed; and articulating joint testbed.

77 FR 27085 - TMI Forest Products, Inc., Crane Creek Division, Morton, WA; Notice of Negative Determination...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-08

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-80,454] TMI Forest Products, Inc., Crane Creek Division, Morton, WA; Notice of Negative Determination Regarding Application for... workers of TMI Forest Products, Inc., Crane Creek Division, Morton, Washington (subject firm). The [[Page...

Proposed technique for vertical alignment of a crane's cable

NASA Technical Reports Server (NTRS)

Gera, J., Jr.

1969-01-01

Proposed vertical alignment technique senses the attitude of a cranes cable and displays any deviation from the vertical. The system consists of a detector assembly fixed to the boom and a display scope located in the cabin. It has potential application with either fixed-boom cranes or gantries.

29 CFR 1910.179 - Overhead and gantry cranes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... adequately guarded or isolated. (40) Fail-safe means a provision designed to automatically stop or safely... shall be capable of maintaining safe lowering speeds of rated loads. (ii) The control braking means... the crane operator. (viii) Automatic cranes shall be so designed that all motions shall fail-safe if...

Pendulation control system and method for rotary boom cranes

DOEpatents

Robinett, III, Rush D.; Groom, Kenneth N.; Feddema, John T.; Parker, Gordon G.

2002-01-01

A command shaping control system and method for rotary boom cranes provides a way to reduce payload pendulation caused by real-time input signals, from either operator command or automated crane maneuvers. The method can take input commands and can apply a command shaping filter to reduce contributors to payload pendulation due to rotation, elevation, and hoisting movements in order to control crane response and reduce tangential and radial payload pendulation. A filter can be applied to a pendulation excitation frequency to reduce residual radial pendulation and tangential pendulation amplitudes.

Isolation and characterization of major histocompatibility complex class II B genes in cranes.

PubMed

Kohyama, Tetsuo I; Akiyama, Takuya; Nishida, Chizuko; Takami, Kazutoshi; Onuma, Manabu; Momose, Kunikazu; Masuda, Ryuichi

2015-11-01

In this study, we isolated and characterized the major histocompatibility complex (MHC) class II B genes in cranes. Genomic sequences spanning exons 1 to 4 were amplified and determined in 13 crane species and three other species closely related to cranes. In all, 55 unique sequences were identified, and at least two polymorphic MHC class II B loci were found in most species. An analysis of sequence polymorphisms showed the signature of positive selection and recombination. A phylogenetic reconstruction based on exon 2 sequences indicated that trans-species polymorphism has persisted for at least 10 million years, whereas phylogenetic analyses of the sequences flanking exon 2 revealed a pattern of concerted evolution. These results suggest that both balancing selection and recombination play important roles in the crane MHC evolution.

Load Weight Classification of The Quayside Container Crane Based On K-Means Clustering Algorithm

NASA Astrophysics Data System (ADS)

Zhang, Bingqian; Hu, Xiong; Tang, Gang; Wang, Yide

2017-07-01

The precise knowledge of the load weight of each operation of the quayside container crane is important for accurately assessing the service life of the crane. The load weight is directly related to the vibration intensity. Through the study on the vibration of the hoist motor of the crane in radial and axial directions, we can classify the load using K-means clustering algorithm and quantitative statistical analysis. Vibration in radial direction is significantly and positively correlated with that in axial direction by correlation analysis, which means that we can use the data only in one of the directions to carry out the study improving then the efficiency without degrading the accuracy of load classification. The proposed method can well represent the real-time working condition of the crane.

An ergonomics study on compatibility of controls of overhead cranes in a heavy engineering factory in West Bengal.

PubMed

Sen, R N; Das, S

2000-04-01

Ergonomics studies, on the machine control and the resultant movements of the cabins and the hooks in 51 electric overhead travelling cranes in a heavy engineering factory, showed that control-movement compatibility is absent in most of the cranes. Also, the layout of the groups of controls and the orientations of each of the individual controls with respect to the operators' seats varied from one crane to another. As the operators were shifted from one crane to another every week, there was a high chance of making mistakes during moving the controls, which might have resulted in severe accidents, especially during periods of high workload. A number of low-cost ergonomics solutions have been recommended to minimize these problems.

Establishing paternity in Whooping Cranes (Grus americana) by DNA analysis

USGS Publications Warehouse

Longmire, Jonathan L.; Gee, George F.; Hardekopf, C.L.; Mark, G.A.

1992-01-01

DNA fingerprinting was used to study paternity and genetic variability within a captive flock of Whooping Cranes (Grus americana). Fingerprint patterns for 42 individuals were obtained by digesting genomic crane DNAs with HaeIII followed by electrophoresis, blotting, and hybridization to the M13 minisatellite probe. Despite finding reduced levels of genetic variation in the Whooping Crane due to a population "bottleneck," these polymorphisms were successfully used to determine paternity in six of seven cases of captive propagation where the maternal-offspring relationship was known, but where the sire was unknown. These determinations of paternity are required for effective genetic management of the crane flock. These results also revealed a number of heterozygous minisatellite loci that will be valuable in future assessments of genetic variability in this endangered species.

Results of the second (1996) experiment to lead cranes on migration behind a motorized ground vehicle

USGS Publications Warehouse

Ellis, D.H.; Clauss, B.; Watanabe, T.; Mykut, R.C.; Shawkey, M.; Mummert, D.P.; Sprague, D.T.; Ellis, Catherine H.; Trahan, F.B.

2001-01-01

Fourteen greater sandhill cranes (Grus canadensis tabida) were trained to follow a specially-equipped truck and 12 were led along a ca 620-km route from Camp Navajo in northern Arizona to the Buenos Aires National Wildlife Refuge near the Arizona/Mexico border. Ten survived the trek, 380 km of which were flown, although only a few cranes flew every stage of the route. Major problems during the migration were powerline collisions (ca 15, 2 fatal) and overheating (when air temperatures exceeded ca 25 C). The tenacity of the cranes in following both in 1995 and 1996 under unfavorable conditions (e.g., poor light, extreme dust, or heat) demonstrated that cranes could be led over long distances by motorized vehicles on the ground.

Mortality of captive whooping cranes caused by eastern equine encephalitis virus.

PubMed

Dein, F J; Carpenter, J W; Clark, G G; Montali, R J; Crabbs, C L; Tsai, T F; Docherty, D E

1986-11-01

Of 39 captive whooping cranes (Grus americana), 7 died during a 7-week period (Sept 17 through Nov 4, 1984) at the Patuxent Wildlife Research Center, Laurel, Md. Before their deaths, 4 cranes did not develop clinical signs, whereas the other 3 cranes were lethargic and ataxic, with high aspartate transaminase, gamma-glutamyl transferase, and lactic acid dehydrogenase activities, and high uric acid concentrations. Necropsies indicated that the birds had ascites, intestinal mucosal discoloration, fat depletion, hepatomegaly, splenomegaly, and visceral gout. Microscopically, extensive necrosis and inflammation were seen in many visceral organs; the CNS was not affected. Eastern equine encephalitis (EEE) virus was isolated from specimens of the livers, kidneys, lungs, brains, and intestines of 4 of the 7 birds that died, and EEE virus-neutralizing antibody was detected in 14 (44%) of the 32 surviving birds. Other infectious or toxic agents were not found. Morbidity or mortality was not detected in 240 sandhill cranes (Grus canadensis) interspersed among the whooping cranes; however, 13 of the 32 sandhill cranes evaluated had EEE virus-neutralizing antibody. Of the 41 wild birds evaluated in the area, 3 (4%) had EEE virus-neutralizing antibody. Immature Culiseta melanura (the most probable mosquito vector) were found in scattered foci 5 km from the research center.

Mortality of captive whooping cranes caused by eastern equine encephalitis virus

USGS Publications Warehouse

Dein, F.J.; Carpenter, J.W.; Clark, G.G.; Montali, R.J.; Crabbs, C.L.; Tsai, T.F.; Docherty, D.E.

1986-01-01

Of 39 captive whooping cranes (Grus americana), 7 died during a 7-week period (Sept 17 through Nov 4, 1984) at the Patuxent Wildlife Research Center, Laurel, Md. Before their deaths, 4 cranes did not develop clinical signs, whereas the other 3 cranes were lethargic and ataxic, with high aspartate transaminase, gamma-glutamyl transferase, and lactic acid dehydrogenase activities, and high uric acid concentrations. Necropsies indicated that the birds had ascites, intestinal mucosal discoloration, fat depletion, hepatomegaly, splenomegaly, and visceral gout. Microscopically, extensive necrosis and inflammation were seen in many visceral organs; the CNS was not affected. Eastern equine encephalitis (EEE) virus was isolated from specimens of the livers, kidneys, lungs, brains, and intestines of 4 of the 7 birds that died, and EEE virus-neutralizing antibody was detected in 14 (44%) of the 32 surviving birds. Other infectious or toxic agents were not found. Morbidity or mortality was not detected in 240 sandhill cranes (Grus canadensis) interspersed among the whooping cranes; however, 13 of the 32 sandhill cranes evaluated had EEE virus-neutralizing antibody. Of the 41 wild birds evaluated in the area, 3 (4%) had EEE virus-neutralizing antibody. Immature Culiseta melanura (the most probable mosquito vector) were found in scattered foci 5 km from the research center.

Food consumption and retention time in captive whooping cranes (Grus americana)

USGS Publications Warehouse

Nelson, J.T.; Gee, G.F.; Slack, R.D.

1997-01-01

Food consumption, digesta retention time, and food preference were measured for captive whooping cranes fed pelleted diets. The basal commercial diet was compared to four mixtures containing 70% basal and 30% of one of four important winter foods for the whooping crane: blue crab (Callinectes sapidus), wolfberry fruit (Lycium carolinianurn), live oak acorn (Quercus virginiana), or common Rangia clam (Rangia cuneata). Because captive birds would not eat whole foods, we were prevented from direct food preference tests. Food passed through the gut rapidly, with almost complete elimination within 7 hr. There was some indication that retention time was shorter for the low fiber and high ash and calcium clam diet. Cranes ate less wolfberry feed (g/day) than the other feeds, and all birds ate less wolfberry feed on the day it was first fed, compared to basal diet the previous day. Birds ate more low energy feed than high energy feed. Due to combined effects of low energy content, lower metabolizable energy coefficients, and reduced feed consumption, less energy was assimilated for study diets than basal diet. Apparent shorter retention times for some diets con-taming whooping crane foods may partly explain lower digestibilities and metabolizable energy of winter whooping crane foods compared to commercial crane diet.

Research on the influence of helical strakes on dynamic response of floating wind turbine platform

NASA Astrophysics Data System (ADS)

Ding, Qin-wei; Li, Chun

2017-04-01

The stability of platform structure is the paramount guarantee of the safe operation of the offshore floating wind turbine. The NREL 5MW floating wind turbine is established based on the OC3-Hywind Spar Buoy platform with the supplement of helical strakes for the purpose to analyze the impact of helical strakes on the dynamic response of the floating wind turbine Spar platform. The dynamic response of floating wind turbine Spar platform under wind, wave and current loading from the impact of number, height and pitch ratio of the helical strakes is analysed by the radiation and diffraction theory, the finite element method and orthogonal design method. The result reveals that the helical strakes can effectively inhibit the dynamic response of the platform but enlarge the wave exciting force; the best parameter combination is two pieces of helical strakes with the height of 15% D ( D is the diameter of the platform) and the pitch ratio of 5; the height of the helical strake and its pitch ratio have significant influence on pitch response.

Floating Ocean Platform

DTIC Science & Technology

2003-08-15

floating structures create novel habitats for subtidal epibiota?, MARINE ECOLOGY -PROGRESS SERIES, 43-52 Mar. Ecol.- Prog. Ser., 2002 Vegueria, SFJ Godoy... ECOLOGICAL APPLICATIONS, 350-366 Ecol. Appl., 2000 Niedzwecki, JM van de Lindt, JW Gage, JH Teigen, PS, Design estimates of surface wave interaction with...The ecological effects beyond the offshore platform, Coastal Zone: Proceedings of the Symposium on Coastal and Ocean Management, v 2, n pt2, 1989, p

Plasma sheath structure surrounding a large powered spacecraft

NASA Technical Reports Server (NTRS)

Mandell, M. J.; Jongeward, G. A.; Katz, I.

1984-01-01

Various factors determining the floating potential of a highly biased (about 4-kV) spacecraft in low earth orbit are discussed. While the common rule of thumb (90 percent negative; 10 percent positive) is usually a good guide, different biasing and grounding patterns can lead to high positive potentials. The NASCAP/LEO code can be used to predict spacecraft floating potential for complex three-dimensional spacecraft.

Head stabilization in whooping cranes

USGS Publications Warehouse

Kinloch, M.R.; Cronin, T.W.; Olsen, Glenn H.; Chavez-Ramirez, Felipe

2005-01-01

The whooping crane (Grus americana) is the tallest bird in North America, yet not much is known about its visual ecology. How these birds overcome their unusual height to identify, locate, track, and capture prey items is not well understood. There have been many studies on head and eye stabilization in large wading birds (herons and egrets), but the pattern of head movement and stabilization during foraging is unclear. Patterns of head movement and stabilization during walking were examined in whooping cranes at Patuxent Wildlife Research Center, Laurel, Maryland USA. Four whooping cranes (1 male and 3 females) were videotaped for this study. All birds were already acclimated to the presence of people and to food rewards. Whooping cranes were videotaped using both digital and Hi-8 Sony video cameras (Sony Corporation, 7-35 Kitashinagawa, 6-Chome, Shinagawa-ku, Tokyo, Japan), placed on a tripod and set at bird height in the cranes' home pens. The cranes were videotaped repeatedly, at different locations in the pens and while walking (or running) at different speeds. Rewards (meal worms, smelt, crickets and corn) were used to entice the cranes to walk across the camera's view plane. The resulting videotape was analyzed at the University of Maryland at Baltimore County. Briefly, we used a computerized reduced graphic model of a crane superimposed over each frame of analyzed tape segments by means of a custom written program (T. W. Cronin, using C++) with the ability to combine video and computer graphic input. The speed of the birds in analyzed segments ranged from 0.30 m/s to 2.64 m/s, and the proportion of time the head was stabilized ranged from 79% to 0%, respectively. The speed at which the proportion reached 0% was 1.83 m/s. The analyses suggest that the proportion of time the head is stable decreases as speed of the bird increases. In all cases, birds were able to reach their target prey with little difficulty. Thus when cranes are walking searching for food, they walk at a speed that permits them to keep their heads still and visual field immobile at least half the time.

Plasma treatment switches the regime of wetting and floating of pepper seeds.

PubMed

Shapira, Yekaterina; Multanen, Victor; Whyman, Gene; Bormashenko, Yelena; Chaniel, Gilad; Barkay, Zahava; Bormashenko, Edward

2017-09-01

Cold radiofrequency plasma treatment modified wetting and floating regimes of pepper seeds. The wetting regime of plasma-treated seeds was switched from the Wenzel-like partial wetting to the complete wetting. No hydrophobic recovery following the plasma treatment was registered. Environmental scanning electron microscopy of the fine structure of the (three-phase) triple line observed with virgin and plasma-treated seeds is reported. Plasma treatment promoted rapid sinking of pepper seeds placed on the water/air interface. Plasma treatment did not influence the surface topography of pepper seeds, while charged them electrically. Electrostatic repulsion of floating plasma-treated seeds was observed. The surface charge density was estimated from the data extracted from floating of charged seeds and independently with the electrostatic pendulum as σ≈1-2μC/m 2 . Copyright © 2017 Elsevier B.V. All rights reserved.

Method of manufacturing large dish reflectors for a solar concentrator apparatus

DOEpatents

Angel, Roger P [Tucson, AZ; Olbert, Blain H [Tucson, AZ

2011-12-27

A method of manufacturing monolithic glass reflectors for concentrating sunlight in a solar energy system is disclosed. The method of manufacturing allows large monolithic glass reflectors to be made from float glass in order to realize significant cost savings on the total system cost for a solar energy system. The method of manufacture includes steps of heating a sheet of float glass positioned over a concave mold until the sheet of glass sags and stretches to conform to the shape of the mold. The edges of the dish-shaped glass are rolled for structural stiffening around the periphery. The dish-shaped glass is then silvered to create a dish-shaped mirror that reflects solar radiation to a focus. The surface of the mold that contacts the float glass preferably has a grooved surface profile comprising a plurality of cusps and concave valleys. This grooved profile minimizes the contact area and marring of the specular glass surface, reduces parasitic heat transfer into the mold and increases mold lifetime. The disclosed method of manufacture is capable of high production rates sufficiently fast to accommodate the output of a conventional float glass production line so that monolithic glass reflectors can be produced as quickly as a float glass production can make sheets of float glass to be used in the process.

Investigation of Gallium Nitride Transistor Reliability through Accelerated Life Testing and Modeling

DTIC Science & Technology

2011-12-01

Carbon Cd Cadmium CdS Cadmium Sulfide CMOS Complementary Metal Oxide Semiconductor DC Direct Current DoD Department of Defense EBL Electron...Crane Division [NAVSEA Crane], Crane, Indiana ) are Section 4.1and Section 4.3, Condition 2. Eight devices were stressed for over 1000 hours each and

29 CFR 1919.22 - Requirements governing braking devices and power sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Requirements governing braking devices and power sources. All types of winches and cranes shall be provided... winch, or electric cranes shall be equipped so that a failure of the electric power shall stop the... electric winches and cranes during the tests shall be taken from the vessel's circuits. Shore current may...

29 CFR 1926.1420 - Signals-radio, telephone or other electronic transmission of signals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... CONSTRUCTION Cranes and Derricks in Construction § 1926.1420 Signals—radio, telephone or other electronic... must be through a dedicated channel, except: (1) Multiple cranes/derricks and one or more signal persons may share a dedicated channel for the purpose of coordinating operations. (2) Where a crane is...

12. FLOOR 2; STONE CRANE IN PLACE FOR ROCK STONES; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. FLOOR 2; STONE CRANE IN PLACE FOR ROCK STONES; STONE CRANE HAS OAK SPAR, JIB AND BRACE, METAL SCREW, IRON YOKE AND DOGS; IRON PINS FIT THROUGH HOLES IN DOGS INTO HOLES DRILLED IN RUNNER STONE - Hook Windmill, North Main Street at Pantigo Road, East Hampton, Suffolk County, NY

Diseases of whooping cranes seen during annual migration of the Rocky Mountain flock

USGS Publications Warehouse

Snyder, S. Bret; Richard, Michael J.; Drewien, Roderick C.; Thomas, Nancy J.; Thilsted, John P.; Junge, Randall E.

1991-01-01

Diagnosis and treatment of ill whooping cranes of the Rocky Mountain flock was provided by a zoological facility. Cases of avian cholera, lead poisoning and avian tuberculosis were encountered. The zoo efforts were an adjunct to the U.S. Fish and Wildlife Service, Whooping Crane Recovery Plan.

29 CFR 1919.2 - Definition of terms.

Code of Federal Regulations, 2010 CFR

2010-07-01

... horizontal plane by guys (vangs). The term includes shear legs. (2) Crane means a mechanical device, intended... integral part of the machine. A crane may be a fixed or mobile machine. (3) Bulk cargo spout means a spout... ton of 2,000 pounds when applied to shore-based material handling devices or to shore-type cranes...

The safety and physiologic effects of the anticoccidial drugs monensin and clazuril in sandhill cranes (Grus canadensis)

USGS Publications Warehouse

Carpenter, J.W.; Novilla, M.N.; Hatfield, J.S.

1992-01-01

Because crane chick mortality from disseminated visceral coccidiosis (DVC) at the Patuxent Wildlife Research Center increased in 1988, suggesting that the parasite may be developing a resistance to amprolium, a target animal safety study using coccidiostats, monensin and clazuril, was conducted on 27 subadult sandhill cranes.

29 CFR 1919.28 - Unit proof tests-cranes and gear accessory thereto.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Unit proof tests-cranes and gear accessory thereto. 1919.28... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) GEAR CERTIFICATION Certification of Vessels: Tests and Proof Loads; Heat Treatment; Competent Persons § 1919.28 Unit proof tests—cranes and gear accessory thereto...

Serum corticosterone response to adrenocorticotropic hormone stimulation in Florida sandhill cranes.

PubMed

Ludders, J W; Langenberg, J A; Czekala, N M; Erb, H N; McCormick, H

1998-10-01

Florida sandhill cranes (Grus canadensis pratensis) were conditioned to confinement in an enclosure for 7 days, 6 hr a day. On day 8, cranes were catheterized and then confined in an enclosure. Venous blood (2 ml) was collected through the catheter and an attached IV line immediately before (-60 min) and 60 min after (0 min) confinement. Using a randomization table and a restricted cross-over experimental design, cranes were injected intravenously with either saline (control) or adrenocorticotropic hormone (ACTH; cosyntropin, Cortrosyn; 0.25 mg). At 30, 60, 120, 180, 240 and 300 min after injection, blood samples were collected and assayed for corticosterone. The cranes receiving ACTH increased their serum corticosterone concentrations as much as fivefold above baseline concentrations. Serum corticosterone concentrations remained significantly elevated for approximately 60 min after ACTH stimulation. Physical restraint and catheterization caused an increase in serum corticosterone almost comparable to that induced by ACTH stimulation. In cranes injected with saline, serum corticosterone decreased within 1 hr after physical restraint and catheterization, and remained at lower levels throughout the remaining 5 hr of confinement.

Natural fertility in whooping cranes and Mississippi sandhill cranes at Patuxent Wildlife Research Center

USGS Publications Warehouse

Nicolich, Jane M.; Gee, G.F.; Ellis, D.H.; Hereford, Scott G.

2001-01-01

The first fertile whooping crane (Grus americana; WC) egg produced through natural breeding at Patuxent Wildlife Research Center (Patuxent) was laid in 1991. Prior to that time, all fertile whooping crane eggs were the result of artificial insemination. Since 1991, eight different whooping crane pairs at Patuxent have produced fertile eggs through natural breeding. Mean fertility averages over years for each pair range from 40% to 93%. Fertility rates for each pair also vary greatly between years, from 0% to 100% but the causes of the variance are unknown. Experiences with natural fertility in Mississippi sandhill cranes (G. canadensis pulla; MSC) have been similar. Annual natural fertility rates averaged from 21% to 89% and fertility averages for each of 7 pairs also varied greatly between years. Rearing methods have not determined success in natural breeding for either species. Both hand-reared and parent-reared pairs have been fertile. Wing condition, however, has been an important factor affecting natural fertility. Becausce artificial insemination (AI) generally results in higher fertility rates than natural breeding, Al should continue for some pairs.

A complex alloantigen system in Florida sandhill cranes, Grus canadensis pratensis: Evidence for the major histocompatibility (B) system

USGS Publications Warehouse

Jarvi, S.I.; Gee, G.F.; Miller, M.M.; Briles, W.E.

1995-01-01

The B blood group system constitutes the major histocompatibility complex (Mhc) in birds. The Mhc is a cluster of genes largely devoted to the processing and presentation of antigen. The Mhc is highly polymorphic in many species and, thus, useful in the evaluation of genetic diversity for fitness traits within populations of a variety of animals. Correlations found between particular Mhc haplotypes and resistance to certain diseases emphasize the importance of understanding the functional significance of diversity of the Mhc, particularly in species threatened with extinction. As part of studies focused on genetic diversity in wild birds, serological techniques were used to define a highly polymorphic alloantigen system in seven families of Florida sandhill cranes (Grus canadensis pratensis). The results of analyses with antisera produced within the crane families and with chicken Mhc antigen-specific reagents revealed a single major alloantigen system that is likely the Mhc of the Florida sandhill crane. Preliminary experiments indicate that these crane alloantisera will provide a means of defining .the Mhc in other species of cranes.

Parallel processor for real-time structural control

NASA Astrophysics Data System (ADS)

Tise, Bert L.

1993-07-01

A parallel processor that is optimized for real-time linear control has been developed. This modular system consists of A/D modules, D/A modules, and floating-point processor modules. The scalable processor uses up to 1,000 Motorola DSP96002 floating-point processors for a peak computational rate of 60 GFLOPS. Sampling rates up to 625 kHz are supported by this analog-in to analog-out controller. The high processing rate and parallel architecture make this processor suitable for computing state-space equations and other multiply/accumulate-intensive digital filters. Processor features include 14-bit conversion devices, low input-to-output latency, 240 Mbyte/s synchronous backplane bus, low-skew clock distribution circuit, VME connection to host computer, parallelizing code generator, and look- up-tables for actuator linearization. This processor was designed primarily for experiments in structural control. The A/D modules sample sensors mounted on the structure and the floating- point processor modules compute the outputs using the programmed control equations. The outputs are sent through the D/A module to the power amps used to drive the structure's actuators. The host computer is a Sun workstation. An OpenWindows-based control panel is provided to facilitate data transfer to and from the processor, as well as to control the operating mode of the processor. A diagnostic mode is provided to allow stimulation of the structure and acquisition of the structural response via sensor inputs.

[Effects of habitat fragmentation on nesting site selection of red-crowned crane].

PubMed

Wan, Dongmei; Gao, Wei; Wang, Qiuyu; Wang, Haitao; Liu, Mingyu

2002-05-01

During April and May of 1985, 1995 and 1998, red-crowned crane's nesting and variation of breeding population quantities in Shuangtaihekou National Natural Reserve in Liaoning, and also the habitat fragmentation there were investigated. Associated with previous data of the reserve, red-crowned crane's nesting habitat had been seriously fragmentated into 91 patches from one integrated reed wetland. The area of the smallest patch was 0.37 km2, and the minimum distance of two nests was 304 m. Compared with records of previous data, the minimum area of nesting habitat reduced by 0.72 km2. However, the breeding population quantities of red-crowned crane had maintained at about 30 pairs for a long period. The red-crowned crane adapted to the changed environment by the ecological adaptation strategy of reducing area of nesting habitat.

Counter-balanced, multiple cable construction crane

NASA Astrophysics Data System (ADS)

Mikulas, Martin M., Jr.; Yang, Li-Farn

1991-11-01

The invention is a counter-balanced, multiple cable construction crane. The apparatus for hoisting payloads comprises a crane having a lifting means, the lifting means comprising an end effector means and three suspension means or cables. One end of each cable attaches to a different winding means located on the lifting means, and the other end of each cable attaches to a different point on the end effector, such that the three cables have a theoretical point of convergence with this point corresponding to the center of mass of the payload. Three controls command rotation of the winding means to a predetermined position. Accordingly, the crane provides precise and autonomous positioning of the payload without human guidance. The crane further comprises a counter-balancing means. Two controls position the counter-balancing means to offset the overturning moment which arises during the lifting of heavy payloads.

Counter-balanced, multiple cable construction crane

NASA Astrophysics Data System (ADS)

Mikulas, Martin M., Jr.; Yang, Li-Farn

1993-10-01

The invention is a counter-balanced, multiple cable construction crane. The apparatus for hoisting payloads comprises a crane having a lifting means, the lifting means comprising an end effector means and three suspension means or cables. One end of each cable attaches to a different winding means located on the lifting means, and the other end of each cable attaches to a different point on the end effector, such that the three cables have a theoretical point of convergence with this point corresponding to the center of mass of the payload. Three controls command rotation of the winding means to a predetermined position. Accordingly, the crane provides precise and autonomous positioning of the payload without human guidance. The crane further comprises a counter-balancing means. Two controls position the counter-balancing means to offset the overturning moment which arises during the lifting of heavy payloads.

Counter-balanced, multiple cable construction crane

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr. (Inventor); Yang, Li-Farn (Inventor)

1993-01-01

The invention is a counter-balanced, multiple cable construction crane. The apparatus for hoisting payloads comprises a crane having a lifting means, the lifting means comprising an end effector means and three suspension means or cables. One end of each cable attaches to a different winding means located on the lifting means, and the other end of each cable attaches to a different point on the end effector, such that the three cables have a theoretical point of convergence with this point corresponding to the center of mass of the payload. Three controls command rotation of the winding means to a predetermined position. Accordingly, the crane provides precise and autonomous positioning of the payload without human guidance. The crane further comprises a counter-balancing means. Two controls position the counter-balancing means to offset the overturning moment which arises during the lifting of heavy payloads.

Reflections on Leadership Characteristics Necessary To Develop and Sustain Learning School Communities.

ERIC Educational Resources Information Center

Diggins, Patrick B.

1997-01-01

Reflects on what schools must do to become genuine learning organizations. Traditional organizational culture was typically inward looking, centralized, and insular. Bureaucratic systems make schools structurally ineffective. Mintzberg's varied government and normative-control models are less suitable for education than Alfred C. Crane's…

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... stored in temporary containers other than those required in § 1926.152, such as pillow tanks. (f) Framing. During framing operations, employees shall not work under a pole or a structure suspended by a crane, A...

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... stored in temporary containers other than those required in § 1926.152, such as pillow tanks. (f) Framing. During framing operations, employees shall not work under a pole or a structure suspended by a crane, A...

Mapping unstable manifolds using drifters/floats in a Southern Ocean field campaign

NASA Astrophysics Data System (ADS)

Shuckburgh, Emily F.

2012-09-01

Ideas from dynamical systems theory have been used in an observational field campaign in the Southern Ocean to provide information on the mixing structure of the flow. Instantaneous snapshops of data from satellite altimetry provide information concerning surface currents at a scale of 100 km or so. We show that by using time-series of satellite altimetry we are able to deduce reliable information about the structure of the surface flow at scales as small as 10 km or so. This information was used in near-real time to provide an estimate of the location of stable and unstable manifolds in the vicinity of the Antarctic Circumpolar Current. As part of a large U.K./U.S. observational field campaign (DIMES: Diapycnal and Isopycnal Mixing Experiment in the Southern Ocean) a number of drifters and floats were then released (at the surface and at a depth of approximately 1 km) close to the estimated hyperbolic point at the intersection of the two manifolds, in several locations with apparently different dynamical characteristics. The subsequent trajectories of the drifters/floats has allowed the unstable manifolds to be tracked, and the relative separation of pairs of floats has allowed an estimation of Lyapunov exponents. The results of these deployments have given insight into the strengths and limitations of the satellite data which does not resolve small scales in the velocity field, and have elucidated the transport and mixing structure of the Southern Ocean at the surface and at depth.

CRANE POSITIONING APPARATUS

DOEpatents

Landsiedel, F.W.; Wolff, H.

1960-06-28

An apparatus is described for automatically accomplishing the final accurate horizontal positioning of a crane after the latter has been placed to within 1/8 in. of its selected position. For this purpose there is provided a tiltable member on the crane mast for lowering into contact with a stationary probe. Misalignment of the tiltable member, with respect to the probe as the member is lowered, causes tilting of the latter to actuate appropriate switches that energize motors for bringing the mast into proper position. When properly aligned the member is not tilted and a central switch is actuated to indicate the final alignment of the crane.

A sociogram for the cranes of the world.

PubMed

Ellis, D H; Swengel, S R; Archibald, G W; Kepler, C B

1998-05-01

The behavioral repertoire for the world's 15 species of cranes includes over 100 behavioral acts with clear social significance. Each species performs at least 60 discrete social postures, vocalizations, displays, and activities. Because all but a handful of the stereotyped social displays are common to all species, the presence or absence of social displays was useful only to a limited degree in comparing the relatedness of established crane taxonomic groups. However, the breadth of the repertoire for each species and for the family Gruidae tentatively places cranes at the apex of social complexity (at least for stereotyped displays) in the animal world.

A sociogram for the cranes of the world

USGS Publications Warehouse

Ellis, D.H.; Swengel, S.R.; Archibald, George W.; Kepler, C.B.

1998-01-01

The behavioral repertoire for the world's 15 species of cranes includes over 100 behavioral acts with clear social significance. Each species performs at least 60 discrete social postures, vocalizations, displays, and activities. Because all but a handful of the stereotyped social displays are common to all species, the presence or absence of social displays was useful only to a limited degree in comparing the relatedness of established crane taxonomic groups. However, the breadth of the repertoire for each species and for the family Gruidae tentatively places cranes at the apex of social complexity (at least for stereotyped displays) in the animal world.

A neural network-based input shaping for swing suppression of an overhead crane under payload hoisting and mass variations

NASA Astrophysics Data System (ADS)

Ramli, Liyana; Mohamed, Z.; Jaafar, H. I.

2018-07-01

This paper proposes an improved input shaping for minimising payload swing of an overhead crane with payload hoisting and payload mass variations. A real time unity magnitude zero vibration (UMZV) shaper is designed by using an artificial neural network trained by particle swarm optimisation. The proposed technique could predict and directly update the shaper's parameters in real time to handle the effects of time-varying parameters during the crane operation with hoisting. To evaluate the performances of the proposed method, experiments are conducted on a laboratory overhead crane with a payload hoisting, different payload masses and two different crane motions. The superiority of the proposed method is confirmed by reductions of at least 38.9% and 91.3% in the overall and residual swing responses, respectively over a UMZV shaper designed using an average operating frequency and a robust shaper namely Zero Vibration Derivative-Derivative (ZVDD). The proposed method also demonstrates a significant residual swing suppression as compared to a ZVDD shaper designed based on varying frequency. In addition, the significant reductions are achieved with a less shaper duration resulting in a satisfactory speed of response. It is envisaged that the proposed method can be used for designing effective input shapers for payload swing suppression of a crane with time-varying parameters and for a crane that employ finite actuation states.

Adaptive output-based command shaping for sway control of a 3D overhead crane with payload hoisting and wind disturbance

NASA Astrophysics Data System (ADS)

Abdullahi, Auwalu M.; Mohamed, Z.; Selamat, H.; Pota, Hemanshu R.; Zainal Abidin, M. S.; Ismail, F. S.; Haruna, A.

2018-01-01

Payload hoisting and wind disturbance during crane operations are among the challenging factors that affect a payload sway and thus, affect the crane's performance. This paper proposes a new online adaptive output-based command shaping (AOCS) technique for an effective payload sway reduction of an overhead crane under the influence of those effects. This technique enhances the previously developed output-based command shaping (OCS) which was effective only for a fixed system and without external disturbances. Unlike the conventional input shaping design technique which requires the system's natural frequency and damping ratio, the proposed technique is designed by using the output signal and thus, an online adaptive algorithm can be formulated. To test the effectiveness of the AOCS, experiments are carried out using a laboratory overhead crane with a payload hoisting in the presence of wind, and with different payloads. The superiority of the method is confirmed by 82% and 29% reductions in the overall sway and the maximum transient sway respectively, when compared to the OCS, and two robust input shapers namely Zero Vibration Derivative-Derivative and Extra-Insensitive shapers. Furthermore, the method demonstrates a uniform crane's performance under all conditions. It is envisaged that the proposed method can be very useful in designing an effective controller for a crane system with an unknown payload and under the influence of external disturbances.

Accurate analysis of prevalence of coccidiosis in individually identified wild cranes in inhabiting and migrating populations in Japan.

PubMed

Honma, Hajime; Suyama, Yoshihisa; Watanabe, Yuki; Matsumoto, Fumio; Nakai, Yutaka

2011-11-01

Eimeria gruis and E. reichenowi cause coccidiosis, a major parasitic disease of cranes. By non-invasive molecular approaches, we investigated the prevalence and genetic characterization of pathogens in two Japanese crane habitats; one is Hokkaido inhabited by the endangered red-crowned crane, and the other is Izumi in Kyushu where populations that consist mainly of vulnerable hooded and white-naped cranes migrate in winter. The non-invasively collected faecal samples from each wintering population were first subjected to host genomic DNA-targeted analyses to determine the sample origin and avoid sample redundancy. Extremely high prevalence was observed in the Izumi populations (> 90%) compared with the Hokkaido population (18-30%) by examining 470 specimens by microscopy and PCR-based capillary electrophoresis (PCR-CE), using genetic markers in the second internal transcribed spacer (ITS2). Correspondence analysis of PCR-CE data revealed differences in community composition of coccidia between hooded and white-naped cranes. 18S rRNA and ITS2 sequences were determined from single oocysts excreted by red-crowned and hooded cranes. Phylogenetic analysis of 18S rRNA suggested that E. reichenowi was polyphyletic while E. gruis was monophyletic. Together with PCR-CE data, these results indicate different host specificity among the E. reichenowi type. Our data suggest that E. reichenowi comprises multiple species. © 2011 Society for Applied Microbiology and Blackwell Publishing Ltd.

Obtaining an equivalent beam

NASA Technical Reports Server (NTRS)

Butler, Thomas G.

1990-01-01

In modeling a complex structure the researcher was faced with a component that would have logical appeal if it were modeled as a beam. The structure was a mast of a robot controlled gantry crane. The structure up to this point already had a large number of degrees of freedom, so the idea of conserving grid points by modeling the mast as a beam was attractive. The researcher decided to make a separate problem of of the mast and model it in three dimensions with plates, then extract the equivalent beam properties by setting up the loading to simulate beam-like deformation and constraints. The results could then be used to represent the mast as a beam in the full model. A comparison was made of properties derived from models of different constraints versus manual calculations. The researcher shows that the three-dimensional model is ineffective in trying to conform to the requirements of an equivalent beam representation. If a full 3-D plate model were used in the complete representation of the crane structure, good results would be obtained. Since the attempt is to economize on the size of the model, a better way to achieve the same results is to use substructuring and condense the mast to equivalent end boundary and intermediate mass points.

FY04 NDCEE Annual Technologies Publications

DTIC Science & Technology

2006-03-14

Crane Division, Indiana Naval Surface Warfare Center, Indian Head Division (IHDiv), Maryland Navy Ammunition Program Office New Jersey Institute of...full-scale field demonstrations • Coordinated literature reviews, data requests, and telephone interviews with Naval Surface Warfare Center, Crane ...Armored Recon ABN Assault Vehicle, Bridge Launcher Armored Vehicle, Carrier Ammunition, Crane Shovel 20-ton, Hammer Pile Drivers, and Howitzers. Points of

FY04 NDCEE Annual Technologies Publication

DTIC Science & Technology

2006-03-14

Crane Division, Indiana Naval Surface Warfare Center, Indian Head Division (IHDiv), Maryland Navy Ammunition Program Office New Jersey Institute of...full-scale field demonstrations • Coordinated literature reviews, data requests, and telephone interviews with Naval Surface Warfare Center, Crane ...Armored Recon ABN Assault Vehicle, Bridge Launcher Armored Vehicle, Carrier Ammunition, Crane Shovel 20-ton, Hammer Pile Drivers, and Howitzers. Points of

29 CFR 1926.1405 - Disassembly-additional requirements for dismantling of booms and jibs (applies to both the use of...

Code of Federal Regulations, 2011 CFR

2011-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and... sections located between the pendant attachment points and the crane/derrick body are to be removed (partly... sections located between the uppermost boom section and the crane/derrick body are to be removed (partly or...

77 FR 53195 - C.P. Crane LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-31

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER12-2511-000] C.P. Crane LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for Blanket Section 204 Authorization This is a supplemental notice in the above-referenced proceeding, of C.P. Crane LLC...

78 FR 77684 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... Hennepin Avenue, Minneapolis, Minnesota 55480-0291: 1. Dawn Crane, Fosston, Minnesota, individually and as trustee; Lorri Skeie-Campbell, Rio Rancho, New Mexico, individually and as trustee; Dawn M. Skeie Crane Irrevocable Trust; Dawn Crane, as co- trustee; Lorri J. Skeie-Campbell Irrevocable Trust, Winger, and Lorri...

Towards a Better Understanding of Carbon Flux

ERIC Educational Resources Information Center

Asshoff, Roman; Riedl, Susanna; Leuzinger, Sebastian

2010-01-01

In March 1999, a ca. 45 m tall construction crane was installed in a highly diverse, mature temperate forest near the village of Hofstetten, south of Basel (Swiss Canopy Crane project, Switzerland). The crane provides access to the canopy using a gondola for in situ research. With a new type of FACE technique (Free Air CO[subscript 2] Enrichment),…

Machine Shop (Bldg. 163) north bay, east end interior looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Machine Shop (Bldg. 163) north bay, east end interior looking northeast. Note the 250-ton Shaw bridge crane on the upper rails and two smaller P&H bridge cranes on the lower rails. Three cranes shared the lower rails - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Proceedings of the International Workshop on Water Waves and Floating Bodies (16th) Held in Hiroshima, Japan on April 22-25, 2001

DTIC Science & Technology

2001-04-25

design. The method should be easy to handle and should not be time consuming. In this aspect, Takagi and Kohara [2000] proposed an application of the...of a Very Large Floating Structure, Proc. of 14th Int. WWWFB, Port Huron, 1999, pp. 13 7- 14 0 . TAKAGI, K. and KOHARA , K. :Application of the Ray

MOSFET Electric-Charge Sensor

NASA Technical Reports Server (NTRS)

Robinson, Paul A., Jr.

1988-01-01

Charged-particle probe compact and consumes little power. Proposed modification enables metal oxide/semiconductor field-effect transistor (MOSFET) to act as detector of static electric charges or energetic charged particles. Thickened gate insulation acts as control structure. During measurements metal gate allowed to "float" to potential of charge accumulated in insulation. Stack of modified MOSFET'S constitutes detector of energetic charged particles. Each gate "floats" to potential induced by charged-particle beam penetrating its layer.

A comparison between the dynamics of horizontal and vertical axis offshore floating wind turbines.

PubMed

Borg, M; Collu, M

2015-02-28

The need to further exploit offshore wind resources in deeper waters has led to a re-emerging interest in vertical axis wind turbines (VAWTs) for floating foundation applications. However, there has been little effort to systematically compare VAWTs to the more conventional horizontal axis wind turbine (HAWT). This article initiates this comparison based on prime principles, focusing on the turbine aerodynamic forces and their impact on the floating wind turbine static and dynamic responses. VAWTs generate substantially different aerodynamic forces on the support structure, in particular, a potentially lower inclining moment and a substantially higher torque than HAWTs. Considering the static stability requirements, the advantages of a lower inclining moment, a lower wind turbine mass and a lower centre of gravity are illustrated, all of which are exploitable to have a less costly support structure. Floating VAWTs experience increased motion in the frequency range surrounding the turbine [number of blades]×[rotational speed] frequency. For very large VAWTs with slower rotational speeds, this frequency range may significantly overlap with the range of wave excitation forces. Quantitative considerations are undertaken comparing the reference NREL 5 MW HAWT with the NOVA 5 MW VAWT. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

A 3-D SPH model for simulating water flooding of a damaged floating structure

NASA Astrophysics Data System (ADS)

Guo, Kai; Sun, Peng-nan; Cao, Xue-yan; Huang, Xiao

2017-10-01

With the quasi-static analysis method, the terminal floating state of a damaged ship is usually evaluated for the risk assessment. But this is not enough since the ship has the possibility to lose its stability during the transient flooding process. Therefore, an enhanced smoothed particle hydrodynamics (SPH) model is applied in this paper to investigate the response of a simplified cabin model under the condition of the transient water flooding. The enhanced SPH model is presented firstly including the governing equations, the diffusive terms, the boundary implementations and then an algorithm regarding the coupling motions of six degrees of freedom (6-DOF) between the structure and the fluid is described. In the numerical results, a non-damaged cabin floating under the rest condition is simulated. It is shown that a stable floating state can be reached and maintained by using the present SPH scheme. After that, three-dimensional (3-D) test cases of the damaged cabin with a hole at different locations are simulated. A series of model tests are also carried out for the validation. Fairly good agreements are achieved between the numerical results and the experimental data. Relevant conclusions are drawn with respect to the mechanism of the responses of the damaged cabin model under water flooding conditions.

DISTRIBUTION OF THE TEMPERATURE IN THE ASH-GAS FLOW DURING KORYAKSKY VOLCANO ERUPTION IN 2009

NASA Astrophysics Data System (ADS)

Gordeev, E.; Droznin, V.

2009-12-01

The observations of the ash-gas plumes during the Koryaksky eruption in March 2009 by the high resolution thermovision camera allowed obtaining thermal distributions inside the ash-gas flows. The plume structure is formed by single emissions. They rise at the rate of 5.5-7 m/s. The plume structure in general is represented as 3 zones: 1. a zone of high heat exchange; 2. a zone of floating up; 3. a zone of lateral movement. The plume temperature within the zone of lateral movement exceeds the atmospheric temperature by 3-5 oC, within the zone of floating up it exceeds by 20 oC. Its rate within the zone of floating up comprises 5-7 m/s. At the boundary between the zones of high heat exchange and floating up where we know the plume section, from heat balance equation we can estimate steam rate and heat power of the fluid thermal flow. Power of the overheated steam was estimated as Q=35 kg/s. It forms the ash-gas plume from the eruption and has temperature equal to 450 oC. The total volume of water steam produced during 100 days of eruption was estimated 3*105 t, its energy - 109 MJ.

2011 Summary: Coastal wetland restoration research

USGS Publications Warehouse

Kowalski, Kurt P.; Wiley, Michael J.; Wilcox, Douglas A.; Carlson Mazur, Martha L.; Czayka, Alex; Dominguez, Andrea; Doty, Susan; Eggleston, Mike; Green, Sean; Sweetman, Amanda

2014-01-01

The Great Lakes Restoration Initiative (GLRI) projects currently taking place in Great Lakes coastal wetlands provide a unique opportunity to study ecosystem response to management actions as practitioners strive to improve wetland function and increase ecosystem services. Through a partnership between the U.S. Geological Survey – Great Lakes Science Center (GLSC), U.S. Fish and Wildlife Service (USFWS), and Ducks Unlimited, a GLRI-funded project has reestablished the hydrologic connection between an intensively managed impounded wetland (Pool 2B) and Crane Creek, a small Lake Erie tributary, by building a water-control structure that was opened in the spring of 2011. The study site is located within the USFWS Ottawa National Wildlife Refuge (ONWR) and lies within the boundaries of the U.S. Environmental Protection Agency (EPA)-designated Maumee River Area of Concern. The broad objective of the project is to evaluate how hydrologically reconnecting a previously diked wetland impacts fish, mollusks, and other biota and affects nutrient transport, nutrient cycling, water quality, flood storage, and many other abiotic conditions. The results from this project suggest large system-wide benefits from sustainable reestablishment of lake-driven hydrology in this and other similar systems. We comprehensively sampled water chemistry, fish, birds, plants, and invertebrates in Crane Creek coastal wetlands, Pool 2A (a reference diked wetland), and Pool 2B (the reconnected wetland) in 2010 and 2011 to: 1) Characterize spatial and seasonal patterns for these parameters. 2) Examine ecosystem response to the opening of a water-control structure that allows fish passage Our sampling efforts have yielded data that reveal striking changes in water quality, hydrology, and fish assemblages in our experimental unit (2B). Prior to the reconnection, the water chemistry in pools 2A and 2B were very similar. Afterwards, we found that the water chemistry in reconnected Pool 2B was more similar to Crane Creek (e.g., greater turbidity, higher concentration of nitrogen). Sites closest to the structure showed the most creek influence with that influence decreasing with distance from the structure, suggesting that input water from Crane Creek is not mixing fully with the pool water. We also found that water level fluctuations were much greater in the reconnected wetland due to the influence of seiches in Lake Erie. We measured the nutrient concentrations of water flowing into and out of Pool 2B during seiche events and found that the phosphorous and nitrogen concentrations generally were drastically reduced after pulsing through the reconnected wetland. Fish response to the reconnection was equally striking. High-resolution sonar revealed extensive bidirectional movement of fish through the structure on a daily and seasonal basis. There also were significant increases in both the catch per unit effort (CPUE) and the species richness of all sites in Pool 2B from 2010 to 2011. Reconnecting the diked pool to the larger Crane Creek wetland complex, and therefore Lake Erie, has opened up rich new habitat for many fish species. Thirteen species of fish not previously found in the pool entered through the structure and actively used the reconnected wetland. We also found that the wetland functions as a productive spawning ground and nursery area with notable shifts in the predominant age-class of several species of fish, especially northern pike. We observed no negative effects of reconnection on the avian or vegetative communities. All sites within the connected pool had increases in diversity and abundance in the avian community and decreases in the species richness and Floristic Quality Assessment Index values for vegetative communities. After one year of study, data suggest that maintaining a hydrologic connection between diked and coastal wetlands in Lake Erie allows fishes to use vegetated habitats regularly, reduces the concentration of nutrients in coastal waters, and maintains productive habitats for birds and other biota.  It will be important to continue to monitor the status of the reconnected wetland to determine the effect of long-term connection to Crane Creek and Lake Erie.  If conditions degrade, periodic management actions involving hydrologic isolation of the rehabilitated coastal wetland could be used to mimic intermediate levels of disturbance and maintain wetland vegetation.

Sandhill crane roost selection, human disturbance, and forage resources

USGS Publications Warehouse

Pearse, Aaron T.; Krapu, Gary; Brandt, David

2017-01-01

Sites used for roosting represent a key habitat requirement for many species of birds because availability and quality of roost sites can influence individual fitness. Birds select roost sites based on numerous factors, requirements, and motivations, and selection of roosts can be dynamic in time and space because of various ecological and environmental influences. For sandhill cranes (Antigone canadensis) at their main spring-staging area along the Platte River in south-central Nebraska, USA, past investigations of roosting cranes focused on physical channel characteristics related to perceived security as motivating roost distribution. We used 6,310 roost sites selected by 313 sandhill cranes over 5 spring migration seasons (2003–2007) to quantify resource selection functions of roost sites on the central Platte River using a discrete choice analysis. Sandhill cranes generally showed stronger selection for wider channels with shorter bank vegetation situated farther from potential human disturbance features such as roads, bridges, and dwellings. Furthermore, selection for roost sites with preferable physical characteristics (wide channels with short bank vegetation) was more resilient to nearby disturbance features than more narrow channels with taller bank vegetation. The amount of cornfields surrounding sandhill crane roost sites positively influenced relative probability of use but only for more narrow channels < 100 m and those with shorter bank vegetation. We confirmed key resource features that sandhill cranes selected at river channels along the Platte River, and after incorporating spatial variation due to human disturbance, our understanding of roost site selection was more robust, providing insights on how disturbance may interact with physical habitat features. Managers can use information on roost-site selection when developing plans to increase probability of crane use at existing roost sites and to identify new areas for potential use if existing sites become limited.

Capture of sandhill cranes using alpha-chloralose.

PubMed

Hayes, Matthew A; Hartup, Barry K; Pittman, Jeanne M; Barzen, Jeb A

2003-10-01

From 1990-2001, we made 188 successful captures of 166 different greater sandhill cranes (Grus canadensis tabida) through experimental use of alpha-chloralose (AC). Most captures took place during September (72.3%; n = 136), followed by August (14.9%; n = 28), and October (12.8%; n = 24). Territorial pairs were captured more successfully than family groups. Overall morbidity (6.4%) and mortality (4.3%) were lower than most other capture techniques for sandhill cranes. Exertional myopathy (EM) was the most common complication observed using AC (3.7%). Sedation level (chi5(2) = 25.9, P < 0.01) and month of capture (chi2(2) = 12.3, P < 0.01) were both associated with the presence of EM in cranes captured with AC. A logistic regression model suggests lighter sedation and the months of August and October are potential risk factors for EM in sandhill cranes captured with AC in Wisconsin (USA).

KSC-2012-2689

NASA Image and Video Library

2012-05-02

DELAMAR DRY LAKE BED, Nev. – An Erickson Sky Crane helicopter releases The Boeing Company's CST-100 crew capsule over the Delamar Dry Lake Bed near Alamo, Nev., where it floated to a smooth landing beneath its parachute system. This is the second parachute test that Boeing performed under its partnership with NASA's Commercial Crew Program CCP. The first showed the parachute system’s deployment scheme worked and that it could be re-packed and re-used for this second test. In 2011, NASA selected Boeing during Commercial Crew Development Round 2 CCDev2) activities to mature the design and development of a crew transportation system with the overall goal of accelerating a United States-led capability to the International Space Station. The goal of CCP is to drive down the cost of space travel as well as open up space to more people than ever before by balancing industry’s own innovative capabilities with NASA's 50 years of human spaceflight experience. Six other aerospace companies also are maturing launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. ATK, Excalibur Almaz Inc., Blue Origin, Sierra Nevada, Space Exploration Technologies SpaceX, and United Launch Alliance ULA. For more information, visit www.nasa.gov/commercialcrew. Image credit: Boeing

Modelling the transport and accumulation of floating marine debris in the Mediterranean basin.

PubMed

Mansui, J; Molcard, A; Ourmières, Y

2015-02-15

In the era of plastic and global environmental issues, when large garbage patches have been observed in the main oceanic basins, this work is the first attempt to explore the possibility that similar permanent accumulation structures may exist in the Mediterranean Sea. The questions addressed in this work are: can the general circulation, with its sub-basins scale gyres and mesoscale instabilities, foster the concentration of floating items in some regions? Where are the more likely coastal zones impacted from open ocean sources? Multi-annual simulations of advected surface passive debris depict the Tyrrhenian Sea, the north-western Mediterranean sub-basin and the Gulf of Sirte as possible retention areas. The western Mediterranean coasts present very low coastal impact, while the coastal strip from Tunisia to Syria appears as the favourite destination. No permanent structure able to retain floating items in the long-term were found, as the basin circulation variability brings sufficient anomalies. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mitochondrial phylogeography, subspecific taxonomy, and conservation genetics of sandhill cranes (Grus canadensis; Aves: Gruidae)

USGS Publications Warehouse

Rhymer, J.M.; Fain, M.G.; Austin, J.E.; Johnson, D.H.; Krajewski, C.

2001-01-01

Six subspecies of sandhill cranes (Grus canadensis) have been denoted based on perceived morphological and/or breeding locality differences among them. Three subspecies are migratory, breeding from the high arctic in North America and Siberia (lesser sandhill, G. c. canadensis), south through central Canada (Canadian sandhill, G. c. rowani) and into the northern United States (greater sandhill, G. c. tabida). A review of sandhill crane taxonomy indicates that the size variation, on the basis of which these subspecies were named, may be clinal and not diagnostic. The other three subspecies, all listed as endangered or threatened, are non-migratory, resident in Florida (G. c. pratensis), Mississippi (G. c. pulla), and Cuba (G. c. nesiotes). We used analysis of mitochondrial DNA control region (CR) sequences to determine whether haplotypes representing current subspecies show any genetic cohesion or are more consistent with a pattern of clinal variation in morphology. CR sequences indicate that only two highly divergent (5.3%) lineages of sandhill cranes occur in North America: one lineage composed only of arctic-nesting G. c. canadensis, the other of the remaining North American subspecies (we lack data on the Cuban population). The deep split between lineages is consistent with an estimated isolation of approximately 1.5 Mya (mid-Pleistocene), while the distribution of mutational changes within lineages is consistent with an hypothesis of rapid, post-Pleistocene population expansions. No other phylogeographic structuring is concordant with subspecific boundaries, however, analysis of molecular variance indicates that there is significant population genetic differentiation among all subspecies except G. c. tabida and G. c. rowani, which are indistinguishable. We suggest that recognition of the recently named G. c. rowani be abandoned.

ETRCF, TRA654, INTERIOR. CAMERA IS ON MAIN FLOOR. NOTE CRANE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR-CF, TRA-654, INTERIOR. CAMERA IS ON MAIN FLOOR. NOTE CRANE HOOKS. ELECTRICAL EQUIPMENT IS PART OF PAST EXPERIMENT. DOOR AT LEFT EDGE OF VIEW LEADS TO REACTOR SERVICE BUILDING, TRA-635. INL NEGATIVE NO. HD24-1-2. Mike Crane, Photographer, ca. 2003 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

ETR BUILDING, TRA642, INTERIOR. FIRST FLOOR. REACTOR IS IN CENTER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR BUILDING, TRA-642, INTERIOR. FIRST FLOOR. REACTOR IS IN CENTER OF VIEW. CAMERA FACES NORTHWEST. NOTE CRANE RAILS AND DANGLING ELECTRICAL CABLE AT UPPER PART OF VIEW FOR "MOFFETT 2 TON" CRANE. INL NEGATIVE NO. HD46-14-4. Mike Crane, Photographer, 2/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID