... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Yellow corn flour. 137.215 Section 137.215 Food... Flours and Related Products § 137.215 Yellow corn flour. Yellow corn flour conforms to the definition and standard of identity prescribed by § 137.211 for white corn flour except that cleaned yellow corn is used...
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Yellow corn flour. 137.215 Section 137.215 Food... Flours and Related Products § 137.215 Yellow corn flour. Yellow corn flour conforms to the definition and standard of identity prescribed by § 137.211 for white corn flour except that cleaned yellow corn is used...
Yoon, Y; Choe, E
Oxidation of corn oil during frying of soy-flour-added dough was studied. Flour dough containing soy flour at 0%, 10%, 20%, and 30% was fried in corn oil at 180 degrees C for 2.5 min, and a total of 60 fryings were performed every 30 min. The oxidation of oil was determined by contents of free fatty acids (FFA), conjugated dienoic acids (CDA), polar compounds, and p-anisidine values (PAV). Tocopherols and phospholipids (PLs) in the oil were determined by HPLC. Tocopherols were present in corn oil at 1000 ppm before frying and increased after the first frying of dough containing soy flour due to tocopherol transfer from soy-flour-added dough to the oil during frying. However, as the oil repeated frying, tocopherol contents decreased and its degradation rate was higher in the oil that fried soy-flour-added dough than in the oil that fried the dough without soy flour. PL was not detected in corn oil before and after frying. As the oil repeated frying, FFA, CDA, and polar compounds contents, and PAV of frying oil increased due to the oil oxidation. The values were higher in the oil which fried soy-flour-added dough than in the oil fried the dough without soy flour, indicating the acceleration of oil oxidation by soy flour added to dough. Increase in the oil oxidation by soy flour added to the dough was highly correlated with fast decomposition of tocopherol in the oil.
Afifah, N.; Ratnawati, L.
Mocaf flour, rice flour, and corn flour in different concentrations were used to produce dry noodles. The aims of this study were to investigate physicochemical properties of the flours and the quality characteristics of dry noodles made from these flours. Dry noodles were prepared by gelatinization of blending flours followed by feeding the dough to extruder and drying overnight in room temperature. Flours were analyzed for chemical and pasting properties and noodle samples were evaluated for chemical, cooking, and texture properties. The results showed there were significant differences in protein content and elongation between noodles made from blending mocaf and rice flour with that of blending mocaf, rice, and corn flour. The moisture, ash, and protein content of noodle samples ranged from 10.98 to 14.18%, 1.23 to 1.39%, and 4.09 to 5.58%, respectively. Values of noodle cooking quality were ranging from 12.0 - 13.8 minutes, 10.6 to 14.3%, and 204 to 248%, respectively for cooking time, cooking loss, and cooking weight. The elongation, hardness, and adhesiveness of noodles ranged from 276 to 374%, 3,523 to 10,478 gf, and -81.99 to -52.49 g.sec.
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false White corn flour. 137.211 Section 137.211 Food and... Related Products § 137.211 White corn flour. (a) White corn flour is the food prepared by so grinding and bolting cleaned white corn that when tested by the method prescribed in paragraph (b)(2) of this section...
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false White corn flour. 137.211 Section 137.211 Food and... Related Products § 137.211 White corn flour. (a) White corn flour is the food prepared by so grinding and bolting cleaned white corn that when tested by the method prescribed in paragraph (b)(2) of this section...
... 21 Food and Drugs 2 2013-04-01 2013-04-01 false White corn flour. 137.211 Section 137.211 Food and... Related Products § 137.211 White corn flour. (a) White corn flour is the food prepared by so grinding and bolting cleaned white corn that when tested by the method prescribed in paragraph (b)(2) of this section...
... 21 Food and Drugs 2 2014-04-01 2014-04-01 false White corn flour. 137.211 Section 137.211 Food and... Related Products § 137.211 White corn flour. (a) White corn flour is the food prepared by so grinding and bolting cleaned white corn that when tested by the method prescribed in paragraph (b)(2) of this section...
... 21 Food and Drugs 2 2012-04-01 2012-04-01 false White corn flour. 137.211 Section 137.211 Food and... Related Products § 137.211 White corn flour. (a) White corn flour is the food prepared by so grinding and bolting cleaned white corn that when tested by the method prescribed in paragraph (b)(2) of this section...
Martínez, F; el-Dahs, A A
The instant corn flour prepared by the hydrothermal process using corn grits soaked in water at room temperature (28-30 degrees C) for 5 hours and steaming for 1 minute at 118 degrees C presented characteristics similar to that of flours prepared with grits soaked in water at temperature higher than room temperature and different steaming time (5 and 15 minutes). The addition of instant corn flour up of a 25% mixture with wheat flour reduced the peak of maximum viscosity during the heating cycle; however, the final viscosity during the cooling cycle was increased. The water absorption was increased with the increase of substitution in the level of wheat flour. Extensibility, maximum resistance and values of area were reduced with an increase in the level of instant corn flour in the mixture. However, extension resistance and proportional number were increased. Bread prepared from a mixture of instant corn flour and wheat flour showed higher weight with low loaf volume, color and texture of the crumb related to bread wheat.
Martínez B, F; el-Dahs, A A
The objective of this research was to investigate a simplified hydrothermal process for the production of instant corn flour and evaluate some variables that affected the degree of gelatinization of corn flour, and evaluate some technological characteristics of the flour. The use of grits of lesser particle diameter and increasing temperature of the soaking water resulted in an increase in the rate of absorption of water of grits, permitting a reduction of soaking time necessary for the process. The instant corn flour prepared by the hydrothermal process using corn grits soaked in water at room temperature (28-30 degrees C) for 5 hours and steaming for 1 minute at 118 degrees C presented characteristics of viscosity, water absorption index and water solubility index similar to that of flours prepared with grits soaked in water at a temperature higher tan room temperature and different steaming time (5 and 15 minutes). The characteristics of color and shelf life of corn flour were improved with the hydrothermal process.
Martínez, F; el-Dahs, A A
The hydrothermal process using corn grits soaked in water at room temperature (28-30 degrees C) for 5 hours and steaming for 1 minute at 118 degrees C did not affect the proximal composition of the corn flour. However, the amino acid content was reduced approximately 18% (specially lysine and tryptophan). Vitamin and pigment contents were few affected. The characteristics of color and shelf life of corn flour were improved with the hydrothermal process. Tortillas prepared with instant corn flour showed better color and texture in comparison to the tortillas prepared by the conventional process. Polentas prepared with instant corn flour with 30 seconds of mixing showed better characteristics of flavor, odor, texture and required less preparation time than commercial polentas.
Extruded products were prepared from a corn flour and dehulled carioca bean (Phaseolus vulgaris, L.) flour blend using a single-screw extruder. A central composite rotate design was used to evaluate the effects of extrusion process variables: screw speed (318.9-392.9 rpm), feed moisture (10.9-21.0 g...
Gwirtz, Jeffrey A; Garcia-Casal, Maria Nieves
Corn is the cereal with the highest production worldwide and is used for human consumption, livestock feed, and fuel. Various food technologies are currently used for processing industrially produced maize flours and corn meals in different parts of the world to obtain precooked refined maize flour, dehydrated nixtamalized flour, fermented maize flours, and other maize products. These products have different intrinsic vitamin and mineral contents, and their processing follows different pathways from raw grain to the consumer final product, which entail changes in nutrient composition. Dry maize mechanical processing creates whole or fractionated products, separated by anatomical features such as bran, germ, and endosperm. Wet maize processing separates by chemical compound classification such as starch and protein. Various industrial processes, including whole grain, dry milling fractionation, and nixtamalization, are described. Vitamin and mineral losses during processing are identified and the nutritional impacts outlined. Also discussed are the vitamin and mineral contents of corn. PMID:24329576
Cappa, Carola; Lucisano, Mara; Barbosa-Cánovas, Gustavo V; Mariotti, Manuela
The impact of high pressure (HP) processing on corn starch, rice flour and waxy rice flour was investigated as a function of pressure level (400MPa; 600MPa), pressure holding time (5min; 10min), and temperature (20°C; 40°C). Samples were pre-conditioned (final moisture level: 40g/100g) before HP treatments. Both the HP treated and the untreated raw materials were evaluated for pasting properties and solvent retention capacity, and investigated by differential scanning calorimetry, X-ray diffractometry and environmental scanning electron microscopy. Different pasting behaviors and solvent retention capacities were evidenced according to the applied pressure. Corn starch presented a slower gelatinization trend when treated at 600MPa. Corn starch and rice flour treated at 600MPa showed a higher retention capacity of carbonate and lactic acid solvents, respectively. Differential scanning calorimetry and environmental scanning electron microscopy investigations highlighted that HP affected the starch structure of rice flour and corn starch. Few variations were evidenced in waxy rice flour. These results can assist in advancing the HP processing knowledge, as the possibility to successfully process raw samples in a very high sample-to-water concentration level was evidenced. This work investigates the effect of high pressure as a potential technique to modify the processing characteristics of starchy materials without using high temperature. In this case the starches were processed in the powder form - and not as a slurry as in previously reported studies - showing the flexibility of the HP treatment. The relevance for industrial application is the possibility to change the structure of flour starches, and thus modifying the processability of the mentioned products. Copyright © 2016 Elsevier Ltd. All rights reserved.
Ambarsari, I.; Endrasari, R.; Oktaningrum, G. N.
Cassava leaves are nutritious vegetable, but often regarded as an inferior commodity. One of the efforts increasing in the benefit of cassava leaves is through processing it into snack. In order to support the food diversification program and to reduce the dependence on imported commodities, the development of cassava leaves snack could be accompanied by optimizing the use of local materials to minimize the use of wheat flour. The aim of this assessment was to learn the effects of cassava and corn flour substitution on the physicochemical characteristics of cassava-leaves snack. The substitution of local flour (cassava and corn) on the snack production was carried on three levels at 15, 30, and 45%. A control treatment was using 100% wheat flour. The results showed that cassava and corn flour were potential to substitute wheat flour for making cassava-leaves snack. The substitution of cassava and corn flour as much as 45% was able to produce crispy products with a brighter color. The substitution of corn flour was resulting in snacks with the lower content of lipid than the other substitution snacks.
Renewable corn flour has a significant reinforcement effect in natural rubber. The corn flour was hydrolyzed and microfluidized to reduce its particle size. Greater than 90% of the hydrolyzed corn flour had an average size of ~300 nm, a reduction of 33 times compared to unhydrolyzed corn flour. Comp...
Zamora, Gerardo; De-Regil, Luz Maria
Mass fortification of maize flour and corn meal with a single or multiple micronutrients is a public health intervention that aims to improve vitamin and mineral intake, micronutrient nutritional status, health, and development of the general population. Micronutrient malnutrition is unevenly distributed among population groups and is importantly determined by social factors, such as living conditions, socioeconomic position, gender, cultural norms, health systems, and the socioeconomic and political context in which people access food. Efforts trying to make fortified foods accessible to the population groups that most need them require acknowledgment of the role of these determinants. Using a perspective of social determinants of health, this article presents a conceptual framework to approach equity in access to fortified maize flour and corn meal, and provides nonexhaustive examples that illustrate the different levels included in the framework. Key monitoring areas and issues to consider in order to expand and guarantee a more equitable access to maize flour and corn meal are described. PMID:24329609
del Refugio Carrasco Quintero, Ma; Ortiz Hernández, L; Chávez Villasana, A; Roldán Amaro, J A; Guarneros Soto, N; Aguirre Arenas, J; Ledesma Solano, J A
Corn has been from the prehispanic era, the most important feeding plant in the Mexican population, particularly in the most important sectors and in marginal areas. In this setting, enriching the product as flour implies an increase in its nutritional quality, especially because corn is the basic food. To assess the effect of the consumption of corn flour enriched with 3% soybean, vitamins, and minerals on the growth and development of infants and preschool children. experimental study lasting 10 months. The experimental group (n=195) received enriched corn flour whereas the control group (n=200) received non-enriched flour. The indicators were: nutritional status, mental and psychomotor development, and blood hemoglobin levels. in the total sample, there were no differences between the experimental group and the control group. However, there were improvements in the weight-to-height and weight-to-age indexes in the children consuming enriched flour and in children older than one year, who were the babies of indigenous women living in marginal areas. enriched corn flour appears to be an alternative benefitting the children population with higher nutritional deficiencies. However, a longer intervention is necessary to obtain better results.
Fleischman, Alan R; Oinuma, Motoko
Food fortification is an effective public health tool for addressing micronutrient deficiencies. The mandatory fortification of enriched cereal grains (e.g., wheat flour) with folic acid, which began in the United States in 1998, is an example of a successful intervention that significantly reduced the rate of neural tube defects (NTDs). However, despite the drop in NTD rates across all racial/ethnic groups after fortification, Hispanics continue to have the highest rates of this condition. One possible way to reduce this disparity is to fortify corn masa flour to increase the overall intake of folic acid in Hispanic women. We present the available evidence in favor of this approach, address possible safety issues, and outline next steps in the fortification of corn masa flour with folic acid in the United States.
Food fortification is an effective public health tool for addressing micronutrient deficiencies. The mandatory fortification of enriched cereal grains (e.g., wheat flour) with folic acid, which began in the United States in 1998, is an example of a successful intervention that significantly reduced the rate of neural tube defects (NTDs). However, despite the drop in NTD rates across all racial/ethnic groups after fortification, Hispanics continue to have the highest rates of this condition. One possible way to reduce this disparity is to fortify corn masa flour to increase the overall intake of folic acid in Hispanic women. We present the available evidence in favor of this approach, address possible safety issues, and outline next steps in the fortification of corn masa flour with folic acid in the United States. PMID:21680940
Vega Rojas, Lineth J; Rojas Molina, Isela; Gutiérrez Cortez, Elsa; Rincón Londoño, Natalia; Acosta Osorio, Andrés A; Del Real López, Alicia; Rodríguez García, Mario E
This research studied the influence of the germ components on the physicochemical properties of cooked corn and nixtamalized corn flours as a function of the calcium hydroxide content (from 0 to 2.1 w/w) and steeping time (between 0 and 9h). A linear relationship was found between calcium content in germ and steeping time used during nixtamalization process. X-ray diffraction analysis showed that calcium carbonate is formed into the germ structure to 2.1 w/w of calcium hydroxide and 9h steeping time. The presence of the germ improves the development of peak viscosity in flours, and it is related to the increases in calcium concentration in germ and the formation of amylose-lipid complexes. No significant changes were observed in palmitic, stearic, oleic and linoleic acids of corn oil. The levels of further corn oil deterioration were 2.1 w/w of calcium hydroxide concentration and 9h of steeping time. Copyright © 2016 Elsevier Ltd. All rights reserved.
The corn flour composite fillers were prepared by blending corn flour with rubber latex, dried, and cryogenically ground into powders, which were then melt-blended with rubber polymers in an internal mixer to form composites with enhanced mechanical properties. The composites prepared with melt-blen...
Hamner, Heather C.; Tinker, Sarah C.
Corn masa flour, used to make products such as corn tortillas, is a staple food for Hispanic populations residing in the United States, particularly among Mexican Americans and Central Americans. Research has indicated that Hispanic women in the United States continue to be at a higher risk of having a neural tube defect–affected pregnancy than women of other races/ethnicities, even after the introduction of folic acid fortification of cereal grain products labeled as “enriched.” Corn masa flour has, therefore, been suggested as a potential food vehicle for folic acid in the United States. This paper explores the potential impact that folic acid fortification of corn masa flour could have on the Hispanic population in the United States. PMID:24494975
Hamner, Heather C; Tinker, Sarah C
Corn masa flour, used to make products such as corn tortillas, is a staple food for Hispanic populations residing in the United States, particularly among Mexican Americans and Central Americans. Research has indicated that Hispanic women in the United States continue to be at a higher risk of having a neural tube defect-affected pregnancy than women of other races/ethnicities, even after the introduction of folic acid fortification of cereal grain products labeled as "enriched." Corn masa flour has, therefore, been suggested as a potential food vehicle for folic acid in the United States. This paper explores the potential impact that folic acid fortification of corn masa flour could have on the Hispanic population in the United States. © 2014 New York Academy of Sciences.
Whitaker, Thomas B; Trucksess, Mary W; Giesbrecht, Francis G; Slate, Andrew B; Thomas, Francis S
StarLink is a genetically modified corn that produces an insecticidal protein, Cry9C. Studies were conducted to determine the variability and Cry9C distribution among sample test results when Cry9C protein was estimated in a bulk lot of corn flour and meal. Emphasis was placed on measuring sampling and analytical variances associated with each step of the test procedure used to measure Cry9C in corn flour and meal. Two commercially available enzyme-linked immunosorbent assay kits were used: one for the determination of Cry9C protein concentration and the other for % StarLink seed. The sampling and analytical variances associated with each step of the Cry9C test procedures were determined for flour and meal. Variances were found to be functions of Cry9C concentration, and regression equations were developed to describe the relationships. Because of the larger particle size, sampling variability associated with cornmeal was about double that for corn flour. For cornmeal, the sampling variance accounted for 92.6% of the total testing variability. The observed sampling and analytical distributions were compared with the Normal distribution. In almost all comparisons, the null hypothesis that the Cry9C protein values were sampled from a Normal distribution could not be rejected at 95% confidence limits. The Normal distribution and the variance estimates were used to evaluate the performance of several Cry9C protein sampling plans for corn flour and meal. Operating characteristic curves were developed and used to demonstrate the effect of increasing sample size on reducing false positives (seller's risk) and false negatives (buyer's risk).
Gahlawat, P; Sehgal, S
A technique for development of potato flour was standardized. Five products viz. cake, biscuit, weaning food, panjiri and ladoo were prepared incorporating potato flour, defatted soy flour and corn flour. Baking and roasting were the major processing techniques employed for the development of these products. Protein, ash and fat contents of potato flour were almost similar to those of raw potatoes. Significant differences in protein, ash and fat contents of all the products were observed. Protein and starch digestibility of potato flour was significantly higher than that of raw potatoes. Protein digestibility increased by 12 to 17 percent on baking or roasting of products. Processed products had significantly higher starch digestibility and mineral availability compared to raw products. Thus, it can be concluded that roasting and baking are effective means of improving starch and protein digestibility and mineral availability of products.
Ferreira, Sila Mary Rodrigues; de Mello, Ana Paula; de Caldas Rosa dos Anjos, Mônica; Krüger, Cláudia Carneiro Hecke; Azoubel, Patrícia Moreira; de Oliveira Alves, Márcia Aurelina
The aim of this study was to evaluate the use of mixture of sorghum-rice-corn flour and potato starch in the development of gluten-free pasta for celiac disease patients. The experiment was designed according to simplex-lattice method and different types of gluten-free flours were used, such as sorghum, rice, corn, and potato starch. The fifteen formulations were subjected to sensory analysis (Mixed Structured Scale - MSS) and seven formulations were selected in respect to taste and grittiness. These formulations were subjected to Quantitative Descriptive Analysis (QDA), which evaluated the attributes: appearance, color, odor, hardness, elasticity, stickiness, grittiness, taste, residual bitterness and overall quality. Results showed significant difference in appearance, color and hardness. The formulations that showed the best sensory results were submitted to chemical analysis and cooking quality of pasta. It was observed that the best results for mixing is sorghum flour, rice flour and potato starch. Copyright © 2015 Elsevier Ltd. All rights reserved.
Wong, Nellie; Lee, Chow-Yang
The effects of eight diets (atta flour, wheat flour, self-rising flour, rice flour, custard powder, corn flour, tapioca starch, and potato starch) on the development of the red flour beetle, Tribolium castaneum (Herbst), reared at 29-31 degrees C and 66-70% RH were assessed. Five pairs of male and female T. castaneum were reared on the respective diets for 28 d before the experimental setup was dismantled and adult counts were recorded. In another experiment, the insects were allowed to mate and oviposit in each flour or starch type over a period of 7 d before being removed. The counting of pupae and adult emergence began on the day of emergence and was continued on a daily basis until day 140. Proximate analysis was performed for chemical composition of each diet, and the numbers of new adults that developed were found to be positively correlated (r2 = 0.97; P < 0.05) with the protein content and negatively correlated (r2 = 0.93; P < 0.05) with the carbohydrate content. For T. castaneum, the suitable diets were ranked as follows: atta flour > wheat flour > self-rising flour > rice flour > custard powder > corn flour > tapioca starch > potato starch. T. castaneum larval development to the pupal and adult stages developed significantly faster in atta flour (P < 0.05) than in the other diets, and the greatest number of progeny was produced from beetles reared on atta flour. Fewer adults emerged from wheat flour, self-rising flour, and rice flour, and no new emergences were recorded for the remaining diets. Developmental rate was much slower in beetles reared on diets in which a low number in progeny was produced. These data illustrate that different diets can influence the sustainability of these insects and affect their development and growth.
Dos Santos, Ana Maria Pinto; Dos Santos, Liz Oliveira; Brandao, Geovani Cardoso; Leao, Danilo Junqueira; Bernedo, Alfredo Victor Bellido; Lopes, Ricardo Tadeu; Lemos, Valfredo Azevedo
In this work, a homogeneity study of a corn flour reference material candidate for inorganic analysis is presented. Seven kilograms of corn flour were used to prepare the material, which was distributed among 100 bottles. The elements Ca, K, Mg, P, Zn, Cu, Fe, Mn and Mo were quantified by inductively coupled plasma optical emission spectrometry (ICP OES) after acid digestion procedure. The method accuracy was confirmed by analyzing the rice flour certified reference material, NIST 1568a. All results were evaluated by analysis of variance (ANOVA) and principal component analysis (PCA). In the study, a sample mass of 400mg was established as the minimum mass required for analysis, according to the PCA. The between-bottle test was performed by analyzing 9 bottles of the material. Subsamples of a single bottle were analyzed for the within-bottle test. No significant differences were observed for the results obtained through the application of both statistical methods. This fact demonstrates that the material is homogeneous for use as a laboratory reference material. Copyright © 2015 Elsevier Ltd. All rights reserved.
Soong, Yean Yean; Quek, Rina Yu Chin; Henry, Christiani Jeyakumar
Muffins made with wheat flour are a popular snack consumed in western and emerging countries. This study aimed to examine the content of amylose, glycemic response (GR) and glycemic index (GI) of muffins baked with refined wheat and rice flours, as well as wholegrain corn, oat and barley flours. This study adopted a randomized, controlled, crossover, non-blind design. Twelve healthy participants consumed wheat, rice, corn, oat and barley muffins once and the reference glucose solution three times in a random order on non-consecutive day. Capillary blood samples were taken every 15 min in the first 60 min and every 30 min for the remaining 60 min for blood glucose analysis. The Megazyme amylose/amylopectin assay procedure was employed to measure amylose content. The GR elicited from the consumption of wheat, rice and corn muffins was comparable between these samples but significantly greater when compared with oat and barley muffins. Consumption of wholegrain muffins, apart from corn muffin, blunted postprandial GR when compared with muffins baked with refined cereal flours. Muffins baked with wheat, rice, corn, oat and barley flours gave rise to GI values of 74, 79, 74, 53 and 55, respectively. The content of amylose was significantly higher in corn, oat and barley muffins than wheat and rice muffins. The greater content of amylose and fibre may play a part in the reduced glycemic potency of oat and barley muffins. Wheat flour can be substituted with oat and barley flours for healthier muffins and other bakery products.
Li, Fenghua; Jiang, Dafeng; Zheng, Fengjia; Chen, Jindong; Li, Wei
In this study a total of 522 samples were collected from Shandong province of China in 2014 and analysed for the occurrence of fumonisin B1 (FB1), FB2 and FB3 by isotope dilution ultrahigh performance liquid chromatography-tandem mass spectrometry. Fumonisins were detected in 98.1% of the corn products, with the average total level of 369.2 μg kg(-1). The individual average values of FB1, FB2 and FB3 in corn products were 268.3, 53.7 and 47.2 μg kg(-1), respectively. The simultaneous occurrence of FB1, FB2 and FB3 was observed in 76.7% of the corn products. Especially, the results demonstrated that the difference in the contamination levels for fumonisins in these three types of corn products was apparent. In addition, 6.2% of the wheat flour samples were contaminated with FB1, with concentrations ranging from 0.3 to 34.6 µg kg(-1). No FB2 or FB3 was detected in wheat flour. In corn oil samples no fumonisins were detected.
Soong, Yean Yean; Tan, Seow Peng; Leong, Lai Peng; Henry, Jeya Kumar
Muffins are a popular snack consumed in western and emerging countries. Increased glycemic load has been implicated in the aetiology of diabetes. This study examined the starch digestibility of muffins baked with rice, wheat, corn, oat and barley flour. Rapidly digested starch (RDS) was greatest in rice (445 mg/g) and wheat (444 mg/g) muffins, followed by oat (416 mg/g), corn (402 mg/g) and barley (387 mg/g). Total phenolic content was found to be positively correlated with total antioxidative capacity and inversely related to the RDS of muffins. The phenolic content was highest in muffin baked with barley flour (1,687 μg/g), followed by corn (1,454 μg/g), oat (945 μg/g), wheat (705 μg/g), and rice (675 μg/g) flour. Browning was shown not to correlate with free radical scavenging capacity and digestibility of muffins. The presence of high phenolic content and low RDS makes barley muffin an ideal snack to modulate glycemic response. Copyright © 2014 Elsevier Ltd. All rights reserved.
Ngombe, L K; Ngatu, R N; Nyembo, C M; Ilunga, B K; Wembonyama, S O; Kakoma, J B S; Danuser, B; Luboya, O N
The aim of this study was to determine the prevalence of respiratory complaints in Congolese women selling grain flours in Lubumbashi. The study enrolled 370 women, including 183 cassava, corn and soybean flour selling women (exposed group) and 187 tax collectors in municipal markets (control group) in Lubumbashi, DRC. A standardized respiratory health questionnaire was used, and a lung function test performed with the use of peak flow-meters. The prevalence of respiratory complaints was markedly higher in dust-exposed women than controls. In addition, peak expiratory flow rate (PEFR) was significantly lower in the exposed group than in controls (342.46 ± 65.62 vs. 410.89 ± 70.91, respectively ; P<0.05). After adjustment for age and education level, women involved in cassava, corn and soybean flour selling business were more likely to develop respiratory complaints ad disorders as compared to controls.
Hamner, Heather C.; Tinker, Sarah C.; Berry, R.J.; Mulinare, Joe
Background The Institute of Medicine set a tolerable upper intake level (UL) for usual daily total folic acid intake (1,000 µg). Less than 3% of US adults currently exceed the UL. Objective The objective of this study was to determine if folic acid fortification of corn masa flour would increase the percentage of the US population who exceed the UL. Design We used dietary intake data from NHANES 2001–2008 to estimate the percentage of adults and children who would exceed the UL if corn masa flour were fortified at 140 µg of folic acid/100 g. Results In 2001–2008, 2.5% of the US adult population (aged≥19 years) exceeded the UL, which could increase to 2.6% if fortification of corn masa flour occurred. With corn masa flour fortification, percentage point increases were small and not statistically significant for US adults exceeding the UL regardless of supplement use, sex, race/ethnicity, or age. Children aged 1–8 years, specifically supplement users, were the most likely to exceed their age-specific UL. With fortification of corn masa flour, there were no statistically significant increases in the percentage of US children who were exceeding their age-specific UL, and the percentage point increases were small. Conclusions Our results suggest that fortification of corn masa flour would not significantly increase the percentage of individuals who would exceed the UL. Supplement use was the main factor related to exceeding the UL with or without fortification of corn masa flour and within all strata of sex, race/ethnicity, and age group. PMID:23316130
Sharma, Savita; Gupta, Jatinder Pal; Nagi, H P S; Kumar, Rakesh
The effect of blending level (0, 5, 10, 15 and 20%) of corn bran, defatted germ and gluten with wheat flour on the physico-chemical properties (protein, crude fiber, phosphorus, iron and calcium), baking properties of bread, muffins and cookies, and extrusion properties of noodles and extruded snacks prepared from semolina were examined. Blending of wheat flour and corn byproducts significantly increased the protein, crude fiber, phosphorus, iron and calcium contents. Breads from gluten blends had higher loaf volume as compared to bran and germ breads. Among corn byproducts, gluten cookies were rated superior with respect to top grain. Muffins from germ blends and gluten blends had higher acceptability scores than the bran muffins. Blending of corn bran, defatted germ and gluten at 5 and 10% with wheat flour resulted in satisfactory bread, cookie, and muffin score. Quality of noodles was significantly influenced by addition of corn byproducts and their levels. Corn byproducts blending had significant influence on cooking time, however, gruel solid loss affected non-significantly in case of noodles. Expansion ratio and density of extruded snacks was affected non significantly by blending source and blending level. However, significant effect was observed on amperage, pressure, yield and overall acceptability of extruded snacks. Acceptable extruded products (noodles and extruded snacks) could be produced by blending corn byproducts with semolina upto 10% level.
Zhu, Shuangyue; Zheng, Maosheng; Li, Can; Gui, Mengyao; Chen, Qian; Ni, Jinren
Much effort has been made for reducing nitrous oxide (N2O) emission in wastewater treatment processes. This paper presents an interesting way to minimize N2O in aerobic denitrification by strain Pseudomonas stutzeri PCN-1 with help of corn flour as cheaper additional carbon source. Experimental results showed that maximal N2O accumulation by strain PCN-1 was only 0.02% of removed nitrogen if corn flour was used as sole carbon source, which was significantly reduced by 52.07-99.81% comparing with others such as succinate, glucose, acetate and citrate. Sustained release of reducing sugar from starch and continuous expression of nosZ coding for N2O reductase contributed to the special role of corn flour as the ideal carbon source for strain PCN-1. Further experiments in sequencing batch reactors (SBRs) demonstrated similarly efficient nitrogen removal with much less N2O emission due to synergy of the novel strain and activated sludge, which was then confirmed by quantitative PCR analysis. Copyright © 2015 Elsevier Ltd. All rights reserved.
Reddy, M Kavya; Kuna, Aparna; Devi, N Lakshmi; Krishnaiah, N; Kaur, Charanjit; Nagamalleswari, Y
Extruded RTE snacks were prepared from flour blends made with corn flour, Bengal gram flour, roots and tuber flours in a proportion of 60-80: 20: 20 respectively and moisture was adjusted to 17-20 %. The roots and tubers flours were developed from potato (Solanum tuberosum), yam (Dioscorea spp.), sweet potato (Ipomoea batatas L.), taro (Colocassia esculenta) and beet root (Beta vulgaris). Different formulations were extruded at 80 ± 5 °C (heater I) and 95-105 °C (heater II) temperature, 300-350 rpm screw speed, 100 ± 10 °C die temperature and 15 ± 2 kg/h feed rate. The exit diameter of the circular die was 3 mm. Sensory acceptability, physical parameters and nutrient analysis along with storage stability of the products was conducted. The fiber and energy content of the RTE extruded snack improved in experimental samples prepared using root and tuber flours. A serving of 100 g of the snack can provide more than 400 Kcal and 10 g of protein. The overall acceptability of RTE extruded products made with potato and taro were highly acceptable compared to yam and sweet potato. The study demonstrates utilization of roots and tuber flours as potential and diverse ingredients to enhance the appearance and nutritional properties in RTE extruded snack.
Xylo-oligosaccharides (XOS) are known to have beneficial health properties, and are considered to be functional food ingredients. The objective of this study is to compare corn fibers separated from ground corn flour and distillers dried grains with solubles (DDGS) for XOS yield and optimum authoyd...
De Girolamo, A; Pascale, M; Visconti, A
A comparison study of different extraction and clean-up procedures for the liquid chromatographic analysis of fumonisins B(1) (FB(1)) and B(2) (FB(2)) in corn masa flour was performed. The procedures included extraction (heat or room temperature) with acidic conditions or EDTA-containing solvents, and clean-up by immunoaffinity or C18 solid-phase extraction columns. Thereafter an analytical method was optimised using extraction with an acidic mixture of methanol-acetonitrile-citrate/phosphate buffer, clean-up through the immunoaffinity column and determination of fumonisins by liquid chromatography with automated pre-column derivatisation with o-phthaldialdehyde reagent. Recovery experiments performed on yellow, white and blue masa flours at spiking levels of 400, 800 and 1200 µg kg(-1) FB(1) and of 100, 200 and 300 µg kg(-1) FB(2) gave overall mean recoveries of 99% (±6%) for FB(1) and 88% (±6%) for FB(2). Good recoveries (higher than 90% for both FB(1) and FB(2)) were also obtained with corn tortilla chips. The limits of quantification of the method (signal-to-noise ratio of 10) were 25 µg kg(-1) for FB(1) and 17 µg kg(-1) for FB(2). The method was tested on different commercial corn masa flours as well as on white and yellow corn tortilla chips, showing fumonisin contamination levels (FB(1) + FB(2)) up to 1800 µg kg(-1) (FB(1) + FB(2)) in masa flour and 960 µg kg(-1) in tortilla chips. Over 30% of masa flours originating from Mexico exceeded the European Union maximum permitted level.
Pérez-Navarrete, Cecilia; Betancur-Ancona, David; Casotto, Meris; Carmona, Andrés; Tovar, Juscelino
Extrusion is used to produce crunchy expanded foods, such as snacks. The nutritional impact of this process has not been studied sufficiently. In this study, in vitro and in vivo protein and starch bioavailability was evaluated in both raw and extruded corn (Zea mays)(C) and lima bean (Phaseolus lunatus)(B) flour blends, prepared in 75C/25B and 50C/ 50B (p/p) proportions. These were processed with a Brabender extruder at 160 degrees C, 100 rpm and 15.5% moisture content. Proximate composition showed that in the extruded products protein and ash contents increased whereas the fat level decreased. In vitro protein digestibility was higher in the extrudates (82%) than in the raw flours (77%). Potentially available starch and resistant starch contents decreased with extrusion. The in vitro assays indicated that extrusion improved protein and starch availability in the studied blends. In vivo bioavailability was evaluated using the rice weevil (Sithophilus oryzae) as a biological model. The most descriptive biomarkers of the changes suggested by the in vivo tests were body protein content (increased by extrusion) and intestinal a-amylase activity (decreased by processing). Overall, results suggest that extrusion notably increases the nutritional quality of corn and lima bean flour blends.
Craig M. Clemons; Daniel F. Caufield
The term âwood flourâ is somewhat ambiguous. Reineke states that the term wood flour âis applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and textureâ. Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...
Craig M. Clemons
The term âwood flourâ is somewhat ambiguous. Reineke states that the term wood flour âis applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and texture.â Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...
Kaur, Amritpal; Kaur, Seeratpreet; Singh, Mrinal; Singh, Narpinder; Shevkani, Khetan; Singh, Baljit
Effect of extrusion parameters (banana flour, screw speed, extrusion temperature) on extrusion behaviour of corn grit extrudates were studied. Second order quadratic equations for extrusion properties as function of banana flour (BF), screwspeed (SS) and extrusion temperature (ET) were computed. BF had predominant effect on the Hunter color (L*, a*, b*) parameters of the extrudates. Addition of BF resulted in corn extrudates with higher L* and lower a* and b* values. Higher ET resulted in dark colored extrudates with lower L* and a* value. Higher SS enhanced the lightness of the extrudates. Expansion of the extrudates increased with increase in the level of BF and ET. WAI of the extrudates decreased with BF whereas increased with SS. However, reversed effect of BF and SS on WSI was observed. Flextural strength of the extrudates increased with increase in SS followed by BF and ET. The addition of BF and higher ET resulted in extrudates with higher oil uptake.
Praseptiangga, Danar; Tryas, Anisha Ayuning; Affandi, Dian Rachmawanti; Atmaka, Windi; Ariyantoro, Achmad Ridwan; Minardi, Slamet
The diversity of Indonesian local food sources has potential to be developed for supporting food security based development of local food diversification. Canna tubers (Canna edulis) and lima beans (Phaseolus lunatus) are two local commodities in Indonesia which under is utilization and has limited assessment to its characteristics. This study aimed at determining the best formula of composite flour based on physical and chemical properties of composite flour produced. There were three formulas, F1 for 85% of canna flour and 15%of lima beans flour, F2 for 70% of canna flour and 30% of lima beans flour and F3 for 55% of canna flour and 45% of lima beans flour. Physical and chemical analyses were conducted and completely randomized design was used. De Garmo analysis was then used to determine the highest effectiveness index from the three formulas developed in this study and F3 demonstrated the highest effectiveness index (0.545) among three formulas evaluated. Thus, formula (F3) was selected as the best composite of the flour developed from canna flour and lima beans flour.
Soeiro, Bruno T; Boen, Thaís R; Wagner, Roger; Lima-Pallone, Juliana A
The aim of the present work was to determine parameters of the corn and wheat flour matrix, such as protein, lipid, moisture, ash and carbohydrates, folic acid and iron contents. Three principal components explained 91% of the total variance. Wheat flours were characterized by high protein and moisture content. On the other hand, the corn flours had the greater carbohydrates, lipids and folic acid levels. The concentrations of folic acid were lower than the issued value for wheat flours. Nevertheless, corn flours presented extremely high values. The iron concentration was higher than that recommended in Brazilian legislation. Poor homogenization of folic acid and iron was observed in enriched flours. This study could be useful to help the governmental authorities in the enriched food programs evaluation.
Md Nor, Norfezah; Carr, Alistair; Hardacre, Allan; Brennan, Charles S.
Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE) snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg), physical characteristics (expansion ratio, bulk density, true density and hardness) and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME) decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences (p > 0.05) in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties. PMID:28239106
Nor, Norfezah Md; Carr, Alistair; Hardacre, Allan; Brennan, Charles S
Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE) snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg), physical characteristics (expansion ratio, bulk density, true density and hardness) and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME) decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences ( p > 0.05) in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties.
Plain flour has a lot of chemical energy packed into it. When the flour is in a clump or pile it does not ignite although it may blacken. This is because there is not enough flour exposed to the oxygen in the air. Aerosolising the flour exposes it to much more oxygen allowing a self sustaining combustion reaction to occur when an ignition source…
Figuerola, F E; Estévez, A M; Castillo, E
The feasibility of adding chick-pea flour substituting part of wheat flour in yeast-leavened bread-making in order to increase the protein value, was studied. A 70% extraction chick-pea flour of commercial granulometry (150 mu) was prepared. Wheat flours of 74% and 78% extraction were then blended with 5%, 10% and 15% of chick-pea flour. Every flour and blend were subsequently analyzed to determine protein, ash, fiber, fat and maltose content, as well as sedimentation, farinogram and bread-making. Addition of chick-pea flour increased protein, fiber, ash and fat content in the blends, not causing a severe effect on quality, even at the 15% level of substitution. Blends showed an increase in maltose content, W value and bread specific volume. Furthermore, breads prepared were of good quality even without the use of maturing agents.
Martínez, F; Ciacco, C F; Salinas, Y
The objective of this work was to study the effect of the extrusion process in the color of instant flours and its tortillas prepared with mixtures of commercial instant corn flour. In the extrusion process four flours from two genotypes of sorghum (whole and decorticated sorghum of each genotype) were used. These flours were processed in a single screw Brabender laboratory extruder. In the preparation of sorghum tortillas and sorghum-corn tortillas four flours were selected from the extrusion process. 1) genotype CMSXS 9A: Whole flour extruded with moisture content of 15% and screw rate of 130 rpm, flour from decorticated sorghum with particle size less than 0.420 mm extruded with moisture content of 15% and screw rate of 130 rpm, 2) genotype CMSXS 145: whole flour extruded with moisture content of 18% and screw rate of 170 rpm, decorticated sorghum flour extruded with moisture content of 15% and screw rate of 130 rpm. Also these flours were utilized with mixtures of commercial instant cornflour for the preparation of tortillas. The instant sorghum flours and tortillas from decorticated sorghum (20% = presented whiter color compared to instant whole sorghum flour and its tortillas. The addition of different levels of commercial instant corn flour (10, 20, 30, 40 and 50%) to the instant sorghum flours improved the color of the mixtures of flour and tortillas. This improvement was more pronounced with instant sorghum flour from whole sorghum grain.(ABSTRACT TRUNCATED AT 250 WORDS)
Altındağ, Gülçin; Certel, Muharrem; Erem, Fundagül; İlknur Konak, Ülgen
Buckwheat is one of the most valuable pseudo-cereals in terms of its nutritional composition, and it is suitable for celiac patients because of its gluten-free characteristic. However, gluten is the main structure-forming protein responsible for the development of structure in baked products. Therefore, it is a challenge to produce high-quality gluten-free products. Transglutaminase addition is a relatively common application used in the production of gluten-free baked goods. The objective of this study was to investigate the combination of buckwheat flour with rice and corn flour at different levels in gluten-free cookie formulations and the impact of transglutaminase on the quality of cookies. Quality parameters evaluated were proximal chemical composition, spread ratio, color, and textural parameters (hardness and fracturability). Spread ratio, protein, crude fiber, ash content, and also b* and hardness values were significantly (p < 0.05) affected by flour combinations. Further, addition of transglutaminase resulted in increased moisture content, spread ratio, and fracturability but decreased hardness values. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.
Collar, Concha; Conte, Paola; Fadda, Costantino; Piga, Antonio
The capability of different gluten-free (GF) basic formulations made of flour (rice, amaranth and chickpea) and starch (corn and cassava) blends, to make machinable and viscoelastic GF-doughs in absence/presence of single hydrocolloids (guar gum, locust bean and psyllium fibre), proteins (milk and egg white) and surfactants (neutral, anionic and vegetable oil) have been investigated. Macroscopic (high deformation) and macromolecular (small deformation) mechanical, viscometric (gelatinization, pasting, gelling) and thermal (gelatinization, melting, retrogradation) approaches were performed on the different matrices in order to (a) identify similarities and differences in GF-doughs in terms of a small number of rheological and thermal analytical parameters according to the formulations and (b) to assess single and interactive effects of basic ingredients and additives on GF-dough performance to achieve GF-flat breads. Larger values for the static and dynamic mechanical characteristics and higher viscometric profiles during both cooking and cooling corresponded to doughs formulated with guar gum and Psyllium fibre added to rice flour/starch and rice flour/corn starch/chickpea flour, while surfactant- and protein-formulated GF-doughs added to rice flour/starch/amaranth flour based GF-doughs exhibited intermediate and lower values for the mechanical parameters and poorer viscometric profiles. In addition, additive-free formulations exhibited higher values for the temperature of both gelatinization and retrogradation and lower enthalpies for the thermal transitions. Single addition of 10% of either chickpea flour or amaranth flour to rice flour/starch blends provided a large GF-dough hardening effect in presence of corn starch and an intermediate effect in presence of cassava starch (chickpea), and an intermediate reinforcement of GF-dough regardless the source of starch (amaranth). At macromolecular level, both chickpea and amaranth flours, singly added, determined
Yahuaca-Juárez, B; Martínez-Flores, H E; Huerta-Ruelas, J A; Pless, R C; Vázquez-Landaverde, P A; Tello Santillán, R
The objective of this work was to evaluate the effect of alkaline cooking on the oxidative stability of oil in corn flour. A central composite design was used to study the combined effect of lime concentration (%) and steep time (h) on peroxide value (PV); specific extinction coefficients at 232 and 270 nm (K232 and K270); and FTIR absorbance at 3009 cm(-1), 3444 cm(-1), and 3530 cm(-1) in oils from corn flour obtained by alkaline cooking. The results indicate that lime concentration and steep time affected the PV, K232, and K270. A decrease of 2.56 % was observed in the IR absorption bands, corresponding to the polyunsaturated fatty acids. The FTIR spectra also showed absorption bands related to the secondary oil oxidation products.
Carrasco Quintero, María Del Refugio; Ortiz Hernández, Luis; Roldán Amaro, José Antonio; Chávez Villasana, Adolfo; Aguirre Arenas, Judith; Aguilar Carrasco, Francisco Raúl
The problem of micronutrient deficiency in the diet, in Mexico affects over 28 million people, mainly rural indigenous women. A solution is food supplementation. The aim of the study was to evaluate the impact of an enriched corn flour soy protein among indigenous women. The study was conducted with a sample of 308 rural Mexican women, conducted in 2010, longitudinal intervention was double-blind and randomized. The experimental group (n = 155) consumed fortified maize meal (soy protein, iron and vitamin A, folic acid, zinc and niacin). The control group (n = 153) received unfortified flour. The evaluated indicators were: weight, body mass index, and waist circumference and blood hemoglobin levels. The intervention time was four months (intermediate) and six months (final). Statistical analysis was descriptive, bivariate and linear regression models. Changes in hemoglobin levels in the experimental group were 13,1 to 13,3 mg / dL. The improvement of hemoglobine levels was shown by the most marginalized community (from 12,4 to 12,9 mg / dL). In both groups, the weight gain was 900 g. Though BMI of the experimental group (24,2 to 24,9 / kg/m²) with an increase of (0,7 / kg/m²) was equal in both groups, the waist circumference in women who consumed fortified flour was equal at the beginning and end of the study (83,0 cm) but the hip circumference changed (94,3 to 94,9 cm) in women who consumed enriched flour. enriched flour is an ideal food for marginalized women in rural areas who are underweight, are undernourished and have anemia.
Yousaf, Ali A; Ahmed, Anwaar; Ahmad, Asif; Hameed, Tabassum; Randhawa, Muhammad Atif; Hayat, Imran; Khalid, Nauman
Protein-enriched cookies were prepared by supplementing gram flour into wheat flour at levels of 0%, 10%, 20%, 30%, 40% and 50% and analysed for physicochemical properties. The protein quality of the cookies was assessed by feeding gram flour-supplemented cookies to albino rats for 10 days. The supplementation resulted in a significant increase in protein, fat, crude fibre and ash contents of the cookies. The thickness and spread factor of cookies differ significantly while non-significant effect was observed in the width of the cookies. The protein efficiency ratio, net protein utilization, biological value and true digestibility differed significantly among diets containing cookies with gram flour fed to rats. Cookies with 30% substitution of straight grade flour and gram flour produced acceptable cookies as compared to control. The cookies containing 40-50% gram flour were best regarded as protein bioavailability for rats.
Herminiati, A.; Rahman, T.; Turmala, E.; Fitriany, C. G.
The purpose of this study was to determine the correlation of different concentrations of modified cassava flour that was processed for banana fritter flour. The research method consists of two stages: (1) to determine the different types of flour: cassava flour, modified cassava flour-A (using the method of the lactid acid bacteria), and modified cassava flour-B (using the method of the autoclaving cooling cycle), then conducted on organoleptic test and physicochemical analysis; (2) to determine the correlation of concentration of modified cassava flour for banana fritter flour, by design was used simple linear regression. The factors were used different concentrations of modified cassava flour-B (y1) 40%, (y2) 50%, and (y3) 60%. The response in the study includes physical analysis (whiteness of flour, water holding capacity-WHC, oil holding capacity-OHC), chemical analysis (moisture content, ash content, crude fiber content, starch content), and organoleptic (color, aroma, taste, texture). The results showed that the type of flour selected from the organoleptic test was modified cassava flour-B. Analysis results of modified cassava flour-B component containing whiteness of flour 60.42%; WHC 41.17%; OHC 21.15%; moisture content 4.4%; ash content 1.75%; crude fiber content 1.86%; starch content 67.31%. The different concentrations of modified cassava flour-B with the results of the analysis provides correlation to the whiteness of flour, WHC, OHC, moisture content, ash content, crude fiber content, and starch content. The different concentrations of modified cassava flour-B does not affect the color, aroma, taste, and texture.
Johnson, Quentin W; Wesley, Annie S
Cereal flour fortification has been identified as an effective mass fortification intervention as part of a national public health strategy to overcome micronutrient deficiencies and improve the health status of populations, especially women and children. The effectiveness of cereal flour fortification programs requires the use of micronutrient premixes that provide the desired health benefits. The Miller's Best/Enhanced Practices for Flour Fortification at the flour mill has been developed to provide specific guidance to millers and government officials to ensure that flour fortification practices are carried out in a way that results in the anticipated public health impact. The paper provides information specific to the use of micronutrient premixes, feeders, the fortification process, and quality control systems to ensure that both minimum and enhanced practices can be followed by the millers. Guidelines for basic and best/enhanced practices to be followed for each stage of the flour fortification process at the flour mill are presented. The paper is designed to be a companion to the Recommended Practices for the Production and Procurement of Premix used in Cereal Fortification Programs and supplementary to existing food quality manuals and systems, such as Good Manufacturing Practices, Food Quality Systems, and Hazard Analysis and Critical Control Points. Other stakeholders involved in flour fortification programs have the responsibility to follow best practices of their own to ensure optimum effectiveness.
Orlandi, Palmer A; Lampel, Keith A; South, Paul K; Assar, Samir K; Carter, Laurenda; Levy, Dan D
StarLink corn is a variety of yellow corn that has been genetically modified by the insertion of an altered cry9C gene into the plant genome. resulting in expression of the insecticidal Cry9C protein. The U.S. Environmental Protection Agency has approved StarLink corn for use in animal feed but not in food intended for human consumption. Therefore, under the U.S. Food, Drug, and Cosmetic Act, any food intended for human consumption in which the presence of StarLink corn is indicated by the presence of either the Cry9C protein or the cry9C gene would be considered adulterated. Extraction and PCR-based methods were used to detect the presence of the cry9C DNA initially in corn flour and corn meal, and then these methods were extended to the analysis of processed corn products, including taco shells, cereals, baby foods, party snacks, and chips, for the presence of this modified genetic material. In a survey of 63 products, the cry9C transgene was detected in 4 taco shells.
Yang, H S; Ali, M S; Jeong, J Y; Moon, S H; Hwang, Y H; Park, G B; Joo, S T
Duck meat sausages were prepared using 10% beef fat (FDS) and 10% hydrated cereal flours including rice (RDS), wheat, corn, millet, and barley to replace fat. Control duck sausages (DS) were also prepared only with duck meat and duck meat plus 10% beef fat. Results showed that protein and fat contents significantly decreased and total expressible fluid reduced with the addition of cereal flours in duck sausage batters. The FDS had higher fat content and lower pH compared with others. Duck sausages with 10% supplemented wheat flour showed the lowest cooking loss among sausages and had similar redness and chroma values to FDS and DS. Texture analysis indicated that hardness of duck sausage significantly decreased when cereal flours and beef fat were added. In particular, RDS showed the lowest values for all texture measurements compared with others. Result of moisture absorption capacity suggested that the decrease in hardness in RDS was due to higher moisture retention for rice flour treatment. Sensory evaluation indicated that DS had significantly lower overall acceptability than RDS, due to its off-flavor, whereas RDS had higher overall acceptability than DS.
Rachmawati; Rohaeti, E.; Rafi, M.
Taro flour on the market is usually sold at higher price than wheat and sago flour. This situation could be a cause for adulteration of taro flour from wheat and sago flour. For this reason, we will need an identification and authentication. Combination of near infrared (NIR) spectrum with multivariate analysis was used in this study to identify and authenticate taro flour from wheat and sago flour. The authentication model of taro flour was developed by using a mixture of 5%, 25%, and 50% of adulterated taro flour from wheat and sago flour. Before subjected to multivariate analysis, an initial preprocessing signal was used namely normalization and standard normal variate to the NIR spectrum. We used principal component analysis followed by discriminant analysis to make an identification and authentication model of taro flour. From the result obtained, about 90.48% of the taro flour mixed with wheat flour and 85% of taro flour mixed with sago flour were successfully classified into their groups. So the combination of NIR spectrum with chemometrics could be used for identification and authentication of taro flour from wheat and sago flour.
Lorenz, K; Coulter, L
The performance of quinoa-wheat flour blends (5/95, 10/90, 20/80, 30/70) were evaluated in breads, cakes and cookies. Breads baked with 5% and 10% quinoa flour were of good quality. Loaf volume decreased, crumb grain became more open and the texture slightly harsh at higher usage levels of quinoa flour. A bitter after taste was noted at the 30% level. Cake quality was acceptable with 5% and 10% of quinoa flour. Cake grain became more open and the texture less silky as the level of quinoa substitution increased. Cake taste improved with either 5% or 10% quinoa flour in the blend. Cookie spread and top grain scores decreased with increasing levels of quinoa flour blended with high-spread cookie flour. Flavor improved up to 20% quinoa flour in the blend. Cookie spread and cookie appearance was improved with a quinoa/low-spread flour blend by using 2% lecithin.
Ganorkar, Pravin M; Patel, Jhanvi M; Shah, Vrushti; Rangrej, Vihang V
Considering the evidence of flaxseed and its defatted flaxseed meal (DFM) for human health benefits, response surface methodology (RSM) based on three level four factor central composite rotatable design (CCRD) was employed for the development of DFM incorporated corn - rice flour blend based extruded snack. The effect of DFM fortification (7.5-20 %), moisture content of feed (14-20 %, wb), extruder barrel temperature (115-135 °C) and screw speed (300-330 RPM) on expansion ratio (ER), breaking strength (BS), overall acceptability (OAA) score and water solubility index (WSI) of extrudates were investigated using central composite rotatable design (CCRD). Significant regression models explained the effect of considered variables on all responses. DFM incorporation level was found to be most significant independent variable affecting on extrudates characteristics followed by extruder barrel temperature and then screw rpm. Feed moisture content did not affect extrudates characteristics. As DFM level increased (7.5 % to 20 %), ER and OAA value decreased. However, BS and WSI values were found to increase with increase in DFM level. Based on the defined criteria for numerical optimization, the combination for the production of DFM incorporated extruded snack with desired sensory attributes was achieved by incorporating 10 % DFM (replacing rice flour in flour blend) and by keeping 20 % moisture content, 312 screw rpm and 125 °C barrel temperature.
Jan, Ulfat; Gani, Adil; Ahmad, Mudasir; Shah, Umar; Baba, Waqas N; Masoodi, F A; Maqsood, Sajid; Gani, Asir; Wani, Idress Ahmed; Wani, S M
Buckwheat flour was incorporated into wheat flour at different levels (0, 20, 40, 60, 80, and 100 %) and the physicochemical, functional and antioxidant properties of the blended flour were studied. This study also investigated the effect of buckwheat on the retention of antioxidant properties of cookies during baking. The results showed significant variation in physicochemical and functional properties of the blended flour. The addition of buckwheat flour into wheat flour also increased the antioxidant properties of blended flour proportionally, but metal chelating properties decreased. The incorporation of buckwheat in wheat flour helped in better retention of antioxidant potential of cookies during baking process as buckwheat cookies (100 % buckwheat) showed greater percentage increase in antioxidant properties than control (100 % wheat). Quality characteristics of cookies such as hardness and spread ratio decreased, while as non-enzymatic browning (NEB) increased significantly with increase in the proportion of buckwheat flour in wheat flour. The Overall acceptability of cookies by sensory analysis was highest at 40 % level of blending. This study concluded that addition of buckwheat in wheat flour, may not only improve the physico-chemical and functional properties of the blended flour but may also enhance the nutraceutical potential of the product prepared from it.
Šporin, Monika; Avbelj, Martina; Kovač, Boris; Možina, Sonja Smole
Wheat bread was enriched with 6%, 10% and 15% dried and milled grape pomace flour from two grape cultivars: 'Merlot' and 'Zelen'. Rheological, textural, sensory and antioxidant properties of the enriched dough and bread were evaluated, and compared to control samples. Grape cultivar had significant impact on the rheological characteristics of the dough, and on the sensory and antioxidant properties of the final bread. Development time and dough stability were longer when 'Merlot' grape pomace flour was added compared to 'Zelen' grape pomace flour and the control. Grape pomace flour addition affected bread volume, firmness, crumb and crust colour, and odour and taste intensity. Moreover, grape pomace flour addition resulted in a stickier and less springy crumb texture, and some negative sensorial properties, such as increased intensity of aftertaste and sand feeling in the mouth. The phenolic content and antioxidant activity of bread were positively correlated with grape pomace flour addition ( r = 0.987, p = 0.01 and r = 0.941, p = 0.01 between phenolic content and ferric reducing antioxidant power and phenolic content and 2,2-diphenyl-1-picrylhydrazyl, respectively). The highest total phenolic contents were 5.92 mg gallic acid equivalents (GAE)/g dw for 'Merlot' and 3.65 mg gallic acid equivalents /g dw for 'Zelen', which were seen for the bread prepared with the highest grape pomace flour addition (15%). The highest antioxidant activity determined by the 2,2-diphenyl-1-picrylhydrazyl and ferric reducing antioxidant power assays were seen for the bread prepared with the highest 'Merlot' grape pomace flour addition (15%). Dough characteristic and sensory profile are strongly influenced by cultivar of grape pomace flour. Based on results of sensory profiling, the variety 'Zelen' is suggested for use.
Adetuyi, F O; Adelabu, H A
In Nigeria, nursing mothers are advised to give their infants plantain flour paste 'amala ogede' with 'ewedu' Corchorus olitorius soup during the process of weaning. Over-matured okra is typically discarded resulting in substantial post-harvest waste; the seed could be processed into okra seed flour for the fortification of plantain flour. The aim of this study is to evaluate the effect of the addition of okra seed flour on the nutrients, functional properties, minerals and zinc bioavailability of plantain flour. Okra seed flour was used to fortify plantain flour in the ratio 90:10, 80:20 and 70:30. The addition of okra seed flour to the plantain flour resulted in a significant increase in the protein, fat, fibre and ash content of the fortified plantain flour, while that of moisture and carbohydrate decreased. The mineral levels of Zn, K and Fe increased significantly while the calcium content decreased. The calculated phytate--zinc molar ratio and [Ca][Phytate]/[Zn] molar ratio of the fortified plantain flour were below the critical levels. The study showed that fortifying plantain flour with okra seed flour resulted in an increase in several nutrients, rendering the zinc more bioavailable. This fortified food has potential as a complimentary food in Nigeria.
Erben, Melina; Osella, Carlos A
The objective of this work was to study the effect of replacing a selected wheat flour for defatted soy flour, pea flour and whey protein concentrate on both dough rheological characteristics and the performance and nutritional quality of bread. A mixture design was used to analyze the combination of the ingredients. The optimization process suggested that a mixture containing 88.8% of wheat flour, 8.2% of defatted soy flour, 0.0% of pea flour and 3.0% of whey protein concentrate could be a good combination to achieve the best fortified-bread nutritional quality. The fortified bread resulted in high protein concentration, with an increase in dietary fiber content and higher calcium levels compared with those of control (wheat flour 100%). Regarding protein quality, available lysine content was significantly higher, thus contributing with the essential amino acid requirement.
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Self-rising flour. 137.180 Section 137.180 Food... Flours and Related Products § 137.180 Self-rising flour. (a) Self-rising flour, self-rising white flour, self-rising wheat flour, is an intimate mixture of flour, sodium bicarbonate, and one or more of the...
Mueses, C; de León, L; Bressani, R
The present study reports on the development of foods containing processed pigeon pea (Cajanus cajan) flour. The pigeon pea flours described in a previous publication were prepared from dehulled pigeon peas by cooking in autoclave, by extrusion-cooking and by cooking/dehydration by drum-drying. Mixtures of cooked pigeon peas and rice were first evaluated biological through a protein complementation design using NPR. The results of this study showed that the two products had high protein quality and were similar when mixed in ratios of 80:20 to 40:60. For the evaluation of the processed pigeon pea flour, mixtures with rice (80:20) were used. All pigeon pea flours gave similar protein quality values. On the basis of these results three products were developed and tested. One was a gruel ("atole"), a second a fruit-flavored thick drink with and without 15% milk. Cookies were also prepared with a series of blends of pigeon pea flour (extrusion-cooked) and wheat. The gruel and the fruit flavored products had high acceptability based on a sensory evaluation test. Cookies with 100% pigeon pea flour were unacceptable, however, mixtures of 75% wheat flour and 25% pigeon pea flour gave cookies of attractive appearance and good taste. The study showed the possibility of preparing and utilizing tropical grain legume flours for food products of relatively high acceptability and nutritive value.
Simonaitis, R A; Cail, R S
A gas-liquid chromatographic (GLC) method was developed for the determination of residues of resmethrin ((5-benzyl-3-furyl)methyl cis-trans-(+/-)-2,2-dimethyl-3-(2-methylpropenyl)-cyclopropanecarboxylate) in corn, cornmeal, flour, and wheat. The commodity, fortified with resmethrin, was extracted by tumbling with pentane and transferred to acetonitrile, the fat was partitioned off, and the sample was chromatographed with 3% ethyl acetate in pentane on Florisil containing 0.5% water. The resmethrin residue was determined by GLC with a flame ionization detector. The results were compared with known standards that had undergone the same cleanup procedures. The method was sensitive to concentrations of resmethrin to 0.2 ppm, recoveries averaged 83%, and reproducibility was good.
Ahmad, Mukhtar; Wani, Touseef Ahmed; Wani, S M; Masoodi, F A; Gani, Adil
Carrot pomace powder (CPP) of 72 and 120 mesh sizes was incorporated in wheat flour at 10, 15 and 20 % level and its impact on flour, dough and cookie characteristics was evaluated. Protein content of the flour blends (8.84-7.88 %) decreased and fibre content (4.63-6.68 %) increased upon blending of CPP in wheat flour. Wheat flour containing 120 mesh CPP showed better functional properties [water absorption (1.16-1.47 %), oil absorption (1.11-1.39 %), solubility index (41-50 %) and swelling power (1.34-1.39)] than those containing 72 mesh. Water solvent retention capacity and sucrose solvent retention capacity increased while lactic acid solvent retention capacity and sodium carbonate solvent retention capacity decreased with blending of CPP. Water absorption, dough development time and degree of softening increased whereas, dough stability and mixing tolerance decreased with increasing CPP. The highest decrease in pasting was observed flour containing 72 mesh CPP. Rheology of dough containing 120 mesh CPP closely resembled the control. Color of flour and cookies increased with blending of CPP irrespective of mesh size. Antioxidant activity of cookies was higher than the flour blends. The cookies containing CPP of 72 mesh showed the lowest hardness. However, cookies containing CPP of 120 mesh showed the best sensory properties. Incorporation of 120 mesh CPP produced low gluten cookies with manageable flour and dough characteristics and better antioxidant and sensory properties.
Erminawati; Sidik, W.; Listanti, R.; Zulfakar, H.
Coconut-pulp flour is coconut flour made from by-product of coconut-milk based food products. The flour contains no gluten and high fibre, which can be considered as functional potential food. Bread made from composite-flour of coconut-pulp flour and wheat flour was studied for its physic-chemical and sensory characteristics. Addition of hydrocolloid, like xanthan-gum, was aimed to provide viscoelasticity for the dough which is essential for baked product. Composite-flour proportion used in this study was; 10CPF/90WF, 15CPF/85WF and 20CPF/80WF; and xanthan gum to total flour of 0,1% and 0,4%. Variable observed were; crumb-texture, crumb-colour, taste of coconut, preference and flavour; moisture, ash, fiber and soluble-protein contents. The research showed that addition of coconut-pulp flour in the composite-flour decreased specific volume value and increased the bread texture produced. It also increased the bread moisture-content, ash-content, fibre-content and soluble protein-content. Moreover, the xanthan-gum addition resulted in decreased specific-volume value and increased texture and fiber-content of the bread produced. Overall, the sensory characteristic of crumb colour, flavour and panellist preference revealed better than control bread made from wheat flour, however its crumb texture harder compare to control bread made from wheat flour. This study showed that coconut-pulp flour potential to be developed for production of functional food.
Nakamura, S; Suzuki, K; Ohtsubo, K
Characteristics of the bread prepared from wheat flour blended with the flour of various kinds of newly developed rice cultivars were investigated. Qualities of the bread made from wheat flour blended with rice flour have been reported to be inferior to those from 100% wheat flour bread. To improve its qualities, we searched for the new-characteristic rice flours among the various kinds of newly developed rice cultivars to blend with the wheat flour for the bread preparation. The most suitable new characteristic rices are combination of purple waxy rice, high-amylose rice, and sugary rice. Specific volume of the bread from the combination of wheat and these 3 kinds of rice flours showed higher specific volume (3.93) compared with the traditional wheat/rice bread (3.58). We adopted the novel method, continuous progressive compression test, to measure the physical properties of the dough and the bread in addition to the sensory evaluation. As a result of the selection of the most suitable rice cultivars and blending ratio with the wheat flour, we could develop the novel wheat/rice bread, of which loaf volume, physical properties, and tastes are acceptable and resistant to firming on even 4 d after the bread preparation. To increase the ratio of rice to wheat, we tried to add a part of rice as cooked rice grains. The specific volume and qualities of the bread were maintained well although the rice content of total flour increased from 30% to 40%.
Bosly, Hanan AbuAlQasem; Kawanna, Maha Adel
Infection of stored wheat flour with insects and toxic fungi can be an extremely serious problem. This study was conducted to isolate and identify the fungal species and insects in different stages, which infested and contaminated the stored flour under Jazan region conditions and changed its color and flavor. The obtained results revealed that the isolated insect was the red flour beetle Tribolium castaneum. Live adult, larvae and cast skin were isolated. Four Aspergillus species were isolated from stored wheat flour; the isolated species prevalence being A. flavus > A. niveus > A. terreus > A. niger by rate 44.5%, 37.8%, 10.9% and 6.7%, respectively. The same fungal species isolated from flour were also isolated from different insect stages. A. flavus was the most common fungus and A. niger was isolated with a lower rate. The results about the isolated fungi either from the suspension of adult insects, larvae or cast skins may confirm the role of T. castaneum to carry and distribute fungi in different parts of the stored flour.
Nakagawa, Mariko; Tabara, Aya; Ushijima, Yuki; Matsunaga, Kotaro; Seguchi, Masaharu
Rice flour was stored at 15 °C/9 months, at 35 °C/14 days, or dry-heated at 120 °C/20 min. The breadmaking properties baked with this rice flour/fresh gluten flour deteriorated. In addition, the rice flour was mixed with oil in water vigorously, and oil-binding ability was measured. Every rice flour subjected to storage or dry-heated at 120 °C showed higher hydrophobicity, owing to changes in proteins. Then, proteins in the stored rice flour were excluded with NaOH solution, and bread baked with the deproteinized rice flour showed the same breadmaking properties as unstored rice flour/fresh gluten flour. The viscoelasticity of wheat glutenin fraction decreased after the addition of dry-heated rice flour in a mixograph profile. DDD staining increased Lab in color meter, which suggested an increase in SH groups in rice protein. The increase in SH groups caused a reduction in wheat gluten protein resulting in a deterioration of rice bread quality. .
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Enriched flour. 137.165 Section 137.165 Food and... Related Products § 137.165 Enriched flour. Enriched flour conforms to the definition and standard of.... Enriched flour may be acidified with monocalcium phosphate within the limits prescribed by § 137.175 for...
... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Enriched flour. 137.165 Section 137.165 Food and... Related Products § 137.165 Enriched flour. Enriched flour conforms to the definition and standard of.... Enriched flour may be acidified with monocalcium phosphate within the limits prescribed by § 137.175 for...
... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Enriched flour. 137.165 Section 137.165 Food and... Related Products § 137.165 Enriched flour. Enriched flour conforms to the definition and standard of.... Enriched flour may be acidified with monocalcium phosphate within the limits prescribed by § 137.175 for...
... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Enriched flour. 137.165 Section 137.165 Food and... Related Products § 137.165 Enriched flour. Enriched flour conforms to the definition and standard of.... Enriched flour may be acidified with monocalcium phosphate within the limits prescribed by § 137.175 for...
... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Enriched bromated flour. 137.160 Section 137.160... Flours and Related Products § 137.160 Enriched bromated flour. Enriched bromated flour conforms to the..., prescribed for enriched flour by § 137.165, except that potassium bromate is added in a quantity not...
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Enriched bromated flour. 137.160 Section 137.160... Flours and Related Products § 137.160 Enriched bromated flour. Enriched bromated flour conforms to the..., prescribed for enriched flour by § 137.165, except that potassium bromate is added in a quantity not...
... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Enriched bromated flour. 137.160 Section 137.160... Flours and Related Products § 137.160 Enriched bromated flour. Enriched bromated flour conforms to the..., prescribed for enriched flour by § 137.165, except that potassium bromate is added in a quantity not...
... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Enriched bromated flour. 137.160 Section 137.160... Flours and Related Products § 137.160 Enriched bromated flour. Enriched bromated flour conforms to the..., prescribed for enriched flour by § 137.165, except that potassium bromate is added in a quantity not...
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Enriched bromated flour. 137.160 Section 137.160... Flours and Related Products § 137.160 Enriched bromated flour. Enriched bromated flour conforms to the..., prescribed for enriched flour by § 137.165, except that potassium bromate is added in a quantity not...
Pareyt, Bram; Bruneel, Charlotte; Brijs, Kristof; Goesaert, Hans; Delcour, Jan A
Flour characteristics of laboratory-milled flour fractions of two wheat cultivars were related to their cookie-baking performance. Cultivar (cv.) Albatros wheat milling yielded fractions with lower damaged starch (DS) and arabinoxylan levels and higher sodium dodecyl sulfate-extractable protein (SDSEP) levels than did cv. Meunier wheat milling. During baking, cv. Albatros flour doughs spread faster and set later than their cv. Meunier counterparts and, hence, resulted in larger cookie diameters. DS levels negatively affected spread rate during both cv. Albatros (R2=0.68) and cv. Meunier (R2=0.51) cookie baking. SDSEP levels also influenced cookie quality. The use of flour heat-treated to reduce its SDSEP levels to different degrees led to reduction of the set time (R2=0.90). It was deduced that larger gluten polymer sizes limit dough spread time during baking and that, apart from DS level, the SDSEP level is an indicator for cookie flour quality.
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Enriched self-rising flour. 137.185 Section 137... Cereal Flours and Related Products § 137.185 Enriched self-rising flour. Enriched self-rising flour... carbon dioxide evolved under ordinary conditions of use of the enriched self-rising flour is not less...
... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Enriched self-rising flour. 137.185 Section 137... Cereal Flours and Related Products § 137.185 Enriched self-rising flour. Enriched self-rising flour... carbon dioxide evolved under ordinary conditions of use of the enriched self-rising flour is not less...
... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Enriched self-rising flour. 137.185 Section 137... Cereal Flours and Related Products § 137.185 Enriched self-rising flour. Enriched self-rising flour... carbon dioxide evolved under ordinary conditions of use of the enriched self-rising flour is not less...
... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Enriched self-rising flour. 137.185 Section 137... Cereal Flours and Related Products § 137.185 Enriched self-rising flour. Enriched self-rising flour... carbon dioxide evolved under ordinary conditions of use of the enriched self-rising flour is not less...
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bromated whole wheat flour. 137.205 Section 137... Cereal Flours and Related Products § 137.205 Bromated whole wheat flour. Bromated whole wheat flour... of ingredients, prescribed for whole wheat flour by § 137.200, except that potassium bromate is added...
... Flours and Related Products § 137.225 Whole durum flour. Whole durum wheat flour conforms to the..., prescribed for whole wheat flour by § 137.200, except that cleaned durum wheat, instead of cleaned wheat other than durum wheat and red durum wheat, is used in its preparation. [58 FR 2877, Jan. 6, 1993] ...
Menon, Lakshmi; Majumdar, Swarnali Dutta; Ravi, Usha
The study elucidates the effect of utilizing cereal-pulse-fruit seed composite flour in the development and quality analysis of leavened bread. The composite flour was prepared using refined wheat flour (WF), high protein soy flour (SF), sprouted mung bean flour (MF) and mango kernel flour (MKF). Three variations were formulated such as V-I (WF: SF: MF: MKF = 85:5:5:5), V-II (WF: SF: MF: MKF = 70:10:10:10), and V-III (WF: SF: MF: MKF = 60:14:13:13). Pertinent functional, physico-chemical and organoleptic attributes were studied in composite flour variations and their bread preparations. Physical characteristics of the bread variations revealed a percentage decrease in loaf height (14 %) and volume (25 %) and 20 % increase in loaf weight with increased substitution of composite flour. The sensory evaluation of experimental breads on a nine-point hedonic scale revealed that V-I score was 5 % higher than the standard bread. Hence, the present study highlighted the nutrient enrichment of bread on incorporation of a potential waste material mango kernel, soy and sprouted legume. Relevant statistical tests were done to analyze the significance of means for all tested parameters.
Alfani, NNA; Ishartani, D.; Anam, C.; Praseptiangga, D.; Manuhara, G. J.
The objective of this study was to determine the physical characteristics of seasoning composite flour that made from white sweet potato, rice, and tapioca flours, and determined the best formula of seasoning composite flour. A completely randomized design (CRD) with formula as the single factor was used. The data were analyzed by one-way ANOVA method and followed by Duncan Multiple Range Test (DMRT) at significance 5% if there was a significant difference. The best formula of seasoning composite flour was 30% tapioca flour, 30% rice flour, and 40% white sweet potato flour. The physical characteristics of the best formula were 5.689 ml/g of swelling power, 2.681 g/g of water absorption capacity, 0.887 ml/g of oil absorption capacity, and 22.03% cooking loss. Physical characteristics of the best seasoning composite flour were significantly different from the commercial seasoning flour and showed a better cooking loss, oil absorption capacity, and swelling power than commercial seasoning flour.
Suntharalingam, S; Ravindran, G
Banana flour prepared from two cooking banana varieties, namely 'Alukehel' and 'Monthan', were evaluated for their physical and biochemical characteristics. The yields of flour averaged 31.3% for 'Alukehel' and 25.5% for 'Monthan'. The pH of the flour ranged from 5.4 to 5.7. The bulk density and particle size distribution were also measured. The average chemical composition (% dry matter) of the flours were as follows: crude protein, 3.2; crude fat, 1.3; ash, 3.7; neutral detergent fiber, 8.9; acid detergent fiber, 3.8; cellulose, 3.1; lignin, 1.0 and hemicellulose, 5.0. Carbohydrate composition indicated the flour to contain 2.8% soluble sugars, 70.0% starch and 12.0% non-starch polysaccharides. Potassium is the predominant mineral in banana flour. Fresh green banana is a good source of vitamin C, but almost 65% is lost during the preparation of flour. Oxalate content (1.1-1.6%) of banana flour is probably nutritionally insignificant. The overall results are suggestive of the potential of green bananas as a source of flour.
Eleazu, Ogbonnaya Chinedum; Eleazu, Kate Chinedum; Kolawole, Segun
The aim of the paper was to compare the food qualities of 2 varieties (SME 1 and 2) of high quality cassava flour (HQCF) produced from indigenous technology and that of some commercially sold wheat/HQCF samples. The pH, proximate, phytochemical, antioxidant, functional properties and starch yield of the flours were carried out using standard techniques. The wheat flours had higher bulk densities and lipids than the HQCF samples while the oil absorption capacity of the HQCF (SME 2) was higher than other fl our samples investigated. The antioxidant assays of the flours showed that they contained considerable levels of antioxidants with the HQCF sample from DAT having higher antioxidants than other flour samples studied. The HQCF (SME 1) had significantly higher (P < 0.05) starch content among the flour samples. The bacteria counts of the HQCF samples ranged from 0 to 1.4 × 10(4) cfu/ml while the fungal count ranged from 0 to 2 × 10(-3) with the unbranded wheat fl our having the highest microbial load compared with other flour samples studied. The use of this indigenous technology produces HQCF with lower lipids, microbial contamination but higher flavour retaining ability, flavonoids and starch contents than wheat flour. The significant positive correlation (R2 = 0.872) between reducing power of the samples and their DPPH antioxidant activity indicate that either could be used to assay for the total antioxidant activity of cassava and wheat flour. The study underscores the need to buy flour from branded companies to reduce the risks of microbial contamination.
Alvarez, María Dolores; Herranz, Beatriz; Jiménez, María José; Canet, Wenceslao
The objective of this work was to study changes in technological characteristics and sensory properties of gluten-free muffins when using chickpea flour (CF) alone and/or with partial CF replacement by corn starch (CS). The effect of partial whole egg replacement by egg white (EW) was also investigated. Four different CF:CS ratios (100:0, 75:25, 50:50, and 25:75) were used in formulations with and without incorporated EW, and compared with wheat flour (WF) muffins (0:0). Muffins prepared from CF alone had lower hardness, springiness, cohesiveness, chewiness, and resilience than control ones. However, reducing protein content by CS addition significantly increased texture profile analysis parameters of muffin crumb. Muffins prepared with 25:75 ratio had a structure with springiness similar to muffins made with WF but were too hard. Reducing whole egg content by partial replacement with EW also significantly increased muffin hardness. Flash profile performed by consumers showed a clear discrimination of muffins according to CF:CS ratio. Muffins containing both CF and CS at 50:50 ratio had the same high overall acceptability and purchase intention as gluten ones. Gluten-free CF-based muffins of satisfactory quality can be manufactured by CS incorporation, either with or without EW. By decreasing and increasing protein and starch contents of chickpea flour (CF) by incorporation of corn starch (CS), muffins formulated from a combination of CF and CS at different CF:CS ratios, either with or without partial replacement of whole egg with egg white, result in high-quality muffins with similar technological and sensory characteristics to those of their gluten counterparts. Sensory overall acceptability and purchase intention of muffins made with a 50:50 ratio did not differ significantly from those of the controls. These findings will benefit celiac population, while promoting the value and utilization of pulses through muffins. © 2017 Wiley Periodicals, Inc.
Rybicka, Iga; Gliszczynska-Swiglo, Anna
Gluten-free (GF) products are those with a natural absence or acceptable level (<20 mg/kg) of gluten. They should be a part of a diet for people with gluten-related disorders, like celiac disease. Recently the popularity of a gluten-free diet (GFD) has risen extremely, because a lot of healthy individuals exclude gluten from their menus. According to the literature data on nutritional deficiencies in the GFD, this trend seems to be risky. This paper describes the nutritional value of 14 flours from different GF raw materials from the aspect of B-group vitamin content (B 1 , B 2 , B 3 , B 6 ). Vitamins were determined using high performance liquid chromatography after enzymatic and acid hydrolysis of the samples. The vitamin contents significantly differed in the analysed flours. The content (in 100 g of the product) of vitamin B 1 ranged from 0.01 mg (amaranth flour) to 0.60 mg (teff flour), vitamin B 2 from 0.03 mg (GF flour with oats) to 0.22 mg (buckwheat flour), vitamin B 3 from below 0.01 mg (amaranth flour) to 6.02 mg (millet flour), and vitamin B 6 from 0.03 mg (acorn flour) to 0.69 mg (amaranth flour). The content of vitamins in the analysed GF flours was also compared to gluten-containing flours. Obtained results indicate that flours from teff, millet, chestnut, buckwheat, and amaranth are better sources of certain B-group vitamins than flours from corn, rice, and some flours with gluten.
Kadan, R S; Bryant, R J; Miller, J A
A commercial long-grain rice flour (CRF) and the flours made by using a pin mill and the Udy mill from the same batch of broken second-head white long-grain rice were evaluated for their particle size and functional properties. The purpose of this study was to compare the commercial rice flour milling method to the pin and Udy milling methods used in our laboratory and pilot plant. The results showed that pin milled flour had more uniform particle size than the other 2 milled flours. The chalky kernels found in broken white milled rice were pulverized more into fines in both Udy milled flour and CRF than in the pin milled flour. The excessive amount of fines in flours affected their functional properties, for example, WSI and their potential usage in the novel foods such as rice breads (RB). The RB made from CRF collapsed more than loaves made from pin milled Cypress long-grain flours.
Kramer, David C.
Describes the flour beetle, "Tribolium confusum," and its life cycle, habitat, culturing requirements, and some possible uses of this beetle as a classroom animal. Discusses what children could learn from flour beetles. Explains how to get rid of beetles found in foods at home. (CW)
Mesías, Marta; Morales, Francisco J.
Traditional cereal-based foods usually include wheat flour in their formulations; however, the search for new products with new ingredients providing different properties to foods is widely pursued by food companies. Replacement of wheat by other flours can modify both nutritional properties and organoleptic characteristics of the final baked food, but can also impact the formation of potentially harmful compounds. The effect of the type of flour on the formation of furfurals and dicarbonyl compounds was studied in a dough model system during baking that contains water or glucose in order to promote the Maillard reaction and caramelization. The formation of methylglyoxal and glyoxal was significantly reduced in spelt and teff formulations compared to wheat flour formulations, respectively. In contrast, samples formulated with oat, teff, and rye showed a significant increase in the levels of 3-deoxyglucosone. Similarly, spelt and teff formulations presented significantly higher concentrations of hydroxymethylfurfural, and spelt, teff, and rye presented higher concentrations of furfural. Therefore, the formation of process contaminants and undesirable compounds in new food products formulated with different flours replacing the traditional wheat flour should be considered carefully in terms of food safety. PMID:28231092
Mesías, Marta; Morales, Francisco J
Traditional cereal-based foods usually include wheat flour in their formulations; however, the search for new products with new ingredients providing different properties to foods is widely pursued by food companies. Replacement of wheat by other flours can modify both nutritional properties and organoleptic characteristics of the final baked food, but can also impact the formation of potentially harmful compounds. The effect of the type of flour on the formation of furfurals and dicarbonyl compounds was studied in a dough model system during baking that contains water or glucose in order to promote the Maillard reaction and caramelization. The formation of methylglyoxal and glyoxal was significantly reduced in spelt and teff formulations compared to wheat flour formulations, respectively. In contrast, samples formulated with oat, teff, and rye showed a significant increase in the levels of 3-deoxyglucosone. Similarly, spelt and teff formulations presented significantly higher concentrations of hydroxymethylfurfural, and spelt, teff, and rye presented higher concentrations of furfural. Therefore, the formation of process contaminants and undesirable compounds in new food products formulated with different flours replacing the traditional wheat flour should be considered carefully in terms of food safety.
Srichuwong, Sathaporn; Curti, Delphine; Austin, Sean; King, Roberto; Lamothe, Lisa; Gloria-Hernandez, Hugo
Minor grains such as sorghum, millet, quinoa and amaranth can be alternatives to wheat and corn as ingredients for whole grain and gluten-free products. In this study, influences of starch structures and other grain constituents on physicochemical properties and starch digestibility of whole flours made from these grains were investigated. Starches were classified into two groups according to their amylopectin branch chain-length: (i) quinoa, amaranth, wheat (shorter chains); and (ii) sorghum, millet, corn (longer chains). Such amylopectin features and amylose content contributed to the differences in thermal and pasting properties as well as starch digestibility of the flours. Non-starch constituents had additional impacts; proteins delayed starch gelatinization and pasting, especially in sorghum flours, and high levels of soluble fibre retarded starch retrogradation in wheat, quinoa and amaranth flours. Enzymatic hydrolysis of starch was restricted by the presence of associated protein matrix and enzyme inhibitors, but accelerated by endogenous amylolytic enzymes. Copyright © 2017 Elsevier Ltd. All rights reserved.
Manikantan, Musuvadi R.; Kingsly Ambrose, Rose P.; Alavi, Sajid
Coconut milk residue and virgin coconut oil cake are important co-products of virgin coconut oil that are used in the animal feed industry. Flour from these products has a number of potential human health benefits and can be used in different food formulations. The objective of this study was to find out the flow-specific physical properties of coconut flours at three moisture levels. Coconut milk residue flour with 4.53 to 8.18% moisture content (w.b.) had bulk density and tapped density of 317.37 to 312.65 and 371.44 to 377.23 kg m-3, respectively; the corresponding values for virgin coconut oil cake flour with 3.85 to 7.98% moisture content (wet basis) were 611.22 to 608.68 and 663.55 to 672.93 kg m-3, respectively. The compressibility index and Hausner ratio increased with moisture. The angle of repose increased with moisture and ranged from 34.12 to 36.20 and 21.07 to 23.82° for coconut milk residue flour and virgin coconut oil cake flour, respectively. The coefficient of static and rolling friction increased with moisture for all test surfaces, with the plywood offering more resistance to flow than other test surfaces. The results of this study will be helpful in designing handling, flow, and processing systems for coconut milk residue and virgin coconut oil cake flours.
Allen, Kendra Alicia
Bio-based plastics are becoming viable alternatives to petroleum-based plastics because they decrease dependence on petroleum derivatives and are more environmentally friendly. Raw materials such as soy flour are widely available, low cost, lightweight, stiffness and have high strength characteristics, but weak interfacial adhesion between the soy flour and the polymer poses a challenge. In this study, soy flour was utilized as a filler in thermoplastic elastomer composites. A surface modification called acetylation was investigated at soy flour concentrations of 10 wt%, 15 wt% and 20 wt%. The mechanical properties of the composites were then compared to that of elastomers without a filler. Chemical characterization of the acetylated soy flour was attempted in order to understand what occurs during the reaction and after completion. In the range of tests, soy flour loadings were observed to be inversely proportional to tensile strength for both the untreated and treated soy flour. However, the acetylated soy flour at 10 wt% concentration performed comparable to that of the neat rubber and resulted in an increase in tensile strength. Unexpectedly, the acetylation reaction increased elongation, which reduced stress within the composite and is believed to increase the adhesion of the soy flour to that of the elastomer. In the nuclear magnetic resonance (SS-NMR), the intensity for the treated soy flour was larger than that of the untreated soy flour for the acetyl groups that were attached to the soy flour, particularly, the carbonyl function group next to the deprotonated oxygen and the methyl group next to the carbonyl. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) indicated that the acetylated soy flour is slightly more thermally stable than the untreated soy flour. The treated soy flour also increased the decomposition temperature of the composite.
Levent, Hacer; Bilgiçli, Nermin
In the present study, the effect of debittered lupin flour (LF) and whole buckwheat flour (BF) on the nutritional and sensory quality of gluten-free cake was studied. LF (10, 20, 30 and 40%) and BF (5, 10, 15 and 20%) were partially replaced with corn starch and rice flour mixture (1:1 w/w) in the gluten-free cake recipe. LF increased the protein, calcium, iron, manganese, phosphorus and zinc contents of the cakes, while BF caused a significant increase (P < 0.05) especially in potassium and magnesium contents of the gluten-free cakes. According to the overall acceptability rating, it was concluded that gluten-free cake could be produced with satisfactory results by the addition of LF and BF up to 30% and 10%, respectively.
Ilowefah, Muna; Chinma, Chiemela; Bakar, Jamilah; Ghazali, Hasanah M; Muhammad, Kharidah; Makeri, Mohammad
As fermentation could reduce the negative effects of bran on final cereal products, the utilization of whole-cereal flour is recommended, such as brown rice flour as a functional food ingredient. Therefore, this study aimed to investigate the effect of fermented brown rice flour on white rice flour, white rice batter and its steamed bread qualities. Brown rice batter was fermented using commercial baker's yeast (Eagle brand) according to the optimum conditions for moderate acidity (pH 5.5) to obtain fermented brown rice flour (FBRF). The FBRF was added to white rice flour at 0%, 10%, 20%, 30%, 40% and 50% levels to prepare steamed rice bread. Based on the sensory evaluation test, steamed rice bread containing 40% FBRF had the highest overall acceptability score. Thus, pasting properties of the composite rice flour, rheological properties of its batter, volume and texture properties of its steamed bread were determined. The results showed that peak viscosity of the rice flour containing 40% FBRF was significantly increased, whereas its breakdown, final viscosity and setback significantly decreased. Viscous, elastic and complex moduli of the batter having 40% FBRF were also significantly reduced. However, volume, specific volume, chewiness, resilience and cohesiveness of its steamed bread were significantly increased, while hardness and springiness significantly reduced in comparison to the control. These results established the effectiveness of yeast fermentation in reducing the detrimental effects of bran on the sensory properties of steamed white rice bread and encourage the usage of brown rice flour to enhance the quality of rice products.
Bush, R.K.; Schroeckenstein, D.; Meier-Davis, S.
A 43-year-old woman developed asthma 6 years after beginning work in a food-processing plant in which soybean flour was used as a protein extender. Symptoms of sneezing, coughing, and wheezing would begin within minutes of exposure to soybean flour and resolve 2 hours after exposure ceased. Skin tests were positive to a soy extract prepared from the flour. Airway hyperreactivity was confirmed by a positive bronchial challenge to methacholine. Bronchial challenge with soybean flour produced an immediate increase in specific airway resistance from 5.0 to 22.7 L. cm of H2O/L/sec. There was no response to challenge with lactose. The patient'smore » allergic response to soy-flour extract was further characterized by several immunologic methods. IgE binding to soy-flour protein by direct RAST was 5.98 times that of a normal control serum. The soy-flour extract was separated by dodecyl sulfate-polyacrylamide gel electrophoresis. Twenty-four protein bands were detected in the crude soy-flour extract. After immunoblotting and subsequent autoradiography, nine proteins with molecular weights ranging from 54,500 to 14,875 were found. Cross-reactivity studies with other legumes demonstrated apparent immunologic identity between a component in green pea extract and a soybean protein with a molecular weight of 17,000. The clinical significance of this cross-reactivity is not known. We conclude that in this case of occupational asthma to soybean flour, multiple allergens were involved. Immunoblotting may be useful in identifying the allergens involved in occupational asthma.« less
Keregero, M M; Mtebe, K
The acceptability of sorghum as human food has been a problem in Tanzania even in regions showing promising potential for its production and utilization. Reasons given for low acceptability of sorghum products as human foods include unpleasant colour, aroma, mouthfeel, taste, unpleasant aftertaste and stomachfeel. An acceptability test of selected sorghum products was, therefore, conducted in the Department of Food Science and Technology, Sokoine University of Agriculture, Morogoro, Tanzania. The objective of the test was to determine consumers' preference for the following wheat-sorghum composite flour products: bread and buns or 'maandazi'. The products were prepared using sorghum flour composited with wheat flour in the following proportions: 100% brown sorghum flour (standard products); and 80:20%; 60:40%; 40:60% and 20:80% for wheat/sorghum (white and brown) composite flours. Results indicated that in the case of composite flour bread, preference for the product improved as the amount of sorghum flour decreased. In the case of buns or 'maandazi' the 100% sorghum flour products of both white and brown were equally preferred. Buns prepared from 100% sorghum flour of white and brown varieties showed promising potential in the improvement of the acceptability of sorghum products. Taking advantage of such products, especially in villages, could enhance sorghum utilization in rural communities.
Berry, Robert J; Bailey, Lynn; Mulinare, Joe; Bower, Carol
After randomized, controlled trials established that consumption of folic acid before pregnancy and during the early weeks of gestation reduces the risk of a neural tube defect (NTD)-affected pregnancy, the United States Public Health Service recommended in 1992 that all women capable of becoming pregnant consume 400 microg folic acid daily. In 1998, folic acid fortification of all enriched cereal grain product flour was fully implemented in the United States and Canada. To provide guidance on national fortification of wheat and maize flours to prevent 50 to 70% of the estimated 300,000 NTD-affected pregnancies worldwide. An expert workgroup reviewed the latest evidence of effectiveness of folic acid flour fortification and the safety of folic acid. Recent estimates show that in the United States and Canada, the additional intake of about 100 to 150 microg/day of folic acid through food fortification has been effective in reducing the prevalence of NTDs at birth and increasing blood folate concentrations in both countries. Most potential adverse effects associated with folic acid are associated with extra supplement use not mandatory fortification. Fortification of wheat flour has a proven record of prevention in other developed countries. In 2009, 51 countries had regulations written for mandatory wheat flour fortification programs that included folic acid. NTDs remain an important cause of perinatal mortality and infantile paralysis worldwide. Mandatory fortification of flour with folic acid has proved to be one of the most successful public health interventions in reducing the prevalence of NTD-affected pregnancies. Most developing countries have few, if any, common sources of folic acid, unlike many developed countries, which have folic acid available from ready-to-eat cereals and supplements. Expanding the number of developed and developing countries with folic acid flour fortification has tremendous potential to safely eliminate most folic acid
Farzana, Tasnim; Mohajan, Suman
The research study was conducted to evaluate the quality characteristics of soy-mushroom-enriched biscuits which could be used as a protein supplemented cereal snack food. In this study, wheat flour was replaced with soy flour at different levels that is 20% (T3), 15% (T2), and 10% (T1) and without soy flour was kept as control (To). Mushroom was added in both biscuits. Biscuits were analyzed for chemical and sensory parameters. Protein content of soy flour-supplemented biscuits increased from 11.07% to 17.86% as compared to control along with a significant increased in fat (17.36–20.89%), fiber (0.48–0.92%), iron (1.56–1.99 mg/100 g), and energy value (463–485 Kcal/g). Ash content also increased but not significantly. Results from chemical analyses and organoleptic evaluation indicate that good quality biscuits can be prepared by substituting wheat flour with 15% soy flour and addition of mushroom powders may affect the backing quality. Protein Energy Malnutrition (PEM) of the Bangladeshi population can be reduced through the development of biscuits in this way. PMID:26405522
Farzana, Tasnim; Mohajan, Suman
The research study was conducted to evaluate the quality characteristics of soy-mushroom-enriched biscuits which could be used as a protein supplemented cereal snack food. In this study, wheat flour was replaced with soy flour at different levels that is 20% (T3), 15% (T2), and 10% (T1) and without soy flour was kept as control (To). Mushroom was added in both biscuits. Biscuits were analyzed for chemical and sensory parameters. Protein content of soy flour-supplemented biscuits increased from 11.07% to 17.86% as compared to control along with a significant increased in fat (17.36-20.89%), fiber (0.48-0.92%), iron (1.56-1.99 mg/100 g), and energy value (463-485 Kcal/g). Ash content also increased but not significantly. Results from chemical analyses and organoleptic evaluation indicate that good quality biscuits can be prepared by substituting wheat flour with 15% soy flour and addition of mushroom powders may affect the backing quality. Protein Energy Malnutrition (PEM) of the Bangladeshi population can be reduced through the development of biscuits in this way.
Sheng, Chan Kok; Amin, Khairul Anuar Mat; Kee, Kwa Bee; Hassan, Mohd Faiz; Ali, E. Ghapur E.
In this study, effect of wood flour content on the color, surface chemistry, mechanical properties and surface morphology of wood-plastic composite (WPC) on different mixture ratios of recycled high density polyethylene (rHDPE) and wood flour were investigated in detail. The presence of wood flour in the composite indicates a significant total color change and a decrease of lightness. Functional groups of wood flour in WPC can be seen clearer from the Fourier transform infrared (FTIR) spectra as the wood flour content increases. The mechanical tensile testing shows that the tensile strength of Young's modulus is improved, whereas the strain and elongation at break were reduced by the addition of wood flour. The gap between the wood flour microvoid fibre and rHDPE matrix becomes closer when the wood flour content is increased as observed by scanning electron microscope (SEM) image. This finding implies a significant improvement on the interaction of interfacial adhesion between the rHDPE matrix and wood flour filler in the present WPC.
Teixeira, Christian A. H. M.; Inamura, Patricia Y.; Uehara, Vanessa B.; Mastro, Nelida L. d.
This study aimed at determining the influence of gamma radiation on technological characteristics of wheat (Triticum sativum) flour and physical properties of pan breads made with this flour. The bread formulation included wheat flour, water, milk, salt, sugar, yeast and butter. The α-amylase activity of wheat flour irradiated with 1, 3 and 9 kGy in a Gammacell 220 (AECL), one day, five days and one month after irradiation was evaluated. Deformation force, height and weight of breads prepared with the irradiated flour were also determined. The enzymatic activity increased—reduction of falling number time—as radiation dose increased, their values being 397 s (0 kGy), 388 s (1 kGy), 343 s (3 kGy) and 293 s (9 kGy) respectively, remaining almost constant over the period of one month. Pan breads prepared with irradiated wheat flour showed increased weight. Texture analysis showed that bread made of irradiated flour presented an increase in maximum deformation force. The results indicate that wheat flour ionizing radiation processing may confer increased enzymatic activity on bread making and depending on the irradiation dose, an increase in weight, height and deformation force parameters of pan breads made of it.
Yuliana, Neti; Nurdjanah, Siti; Setyani, Sri; Novianti, Dini
The use of locally grown crops such as sweet potato as raw material for composite flour is considered advantageous as it reduces the importation of wheat flour. However the use of native sweetpotato flour has drawback properties when applied in the food. This study was aimed to modify sweet potato flour through six methods of lactic fermentation (spontaneous, pickle brine, Lb plantarum, Lc mesentereoides, a mixed of Lb plantarum and Lc mesentereoides, and mixed of Lb plantarum, Lc mesentereoides and yeast) to increase its properties in composite flour. Composite flours were obtained after fermentation of sweet potato slices for 48h in the proportion of 50% sweet potatoes flour and 50% wheat flour. pH, moisture content, swelling power, solubility, and pasting properties were determined for the fermented and unfermented composite flours. The results indicated that the composite fermented flours had better properties than those of non fermented flour. Fermentation increased swelling power, moisture content, meanwhile, solubility, and pH, deacresed. Amylose leaching, however, was not significantly affected by the fermentation process.
Moriya, Susumu; Miki, Yukio; Miyati, Tosiaki; Kanagaki, Mitsunori; Yokobayashi, Tsuneo
We compared the suppression of lingering fat signals in chemical shift selective (CHESS) images by pads filled with flour and pads filled with rice in a phantom and human subjects. First, we prepared a phantom by creating an empty space in a mass of lard and filling the space with air, rice, or flour. Then, we obtained MR images of the phantoms in the center of the magnetic field and at a position 8 cm to the left (off-center) to compare lingering fat signals. MR images of the knee were obtained in 10 healthy volunteers using CHESS after placing a polyurethane sponge pillow, rice pad, or flour pad in the popliteal space under the flexed knee. We visually assessed the number of areas with lingering fat signals and the statistical differences among the groups were assessed using Tukey's test. Similarly to rice, flour clearly decreased lingering fat signals in the phantom study. A similar effect was obtained in the off-center images. In the volunteer study, the mean number of areas with lingering fat signals was 2.5 with a sponge pillow, 0.5 with the rice pad, and 0.3 with the flour pad. Those numbers were significantly different using flour pad and rice pad compared with sponge pillow (P < 0.001). No significant differences were seen between flour pads and rice pads (P = 0.662). Flour pads can suppress lingering fat signals in CHESS images.
Miller, Kathryn; McGough, Norma; Urwin, Heidi
A European law on gluten-free (GF) labeling came into force in 2012, covering foods sold prepacked and in food service establishments, and a similar U.S. Food and Drug Administration (FDA) regulation covers GF labeling from August 2014. Gluten is found in the grains wheat, rye, and barley. A common source of gluten in the kitchen is wheat flour. This research aimed to determine variables that have a significant effect on gluten contamination in commercial kitchens when wheat flour is in use and to establish controls necessary to assure GF production. A pilot study was used to test the following hypotheses: (i) increasing duration of exposure to wheat flour would increase gluten contamination, (ii) increasing distance between the site of preparation and the site of wheat flour would reduce gluten contamination, (iii) the use of a ventilation hood would decrease gluten contamination, and (iv) the use of a barrier segregating the site of preparation of a GF meal and the use of wheat flour would decrease gluten contamination. Petri dishes containing GF rice pudding were placed in three directions at increasing distances (0.5 to 2 m) from a site of wheat flour use. A barrier was in place between a third of samples and the site of wheat flour. After wheat flour was handled for 0.5 and 4.0 h, petri dishes were sealed and the contents were analyzed for gluten. The experiment was duplicated with the ventilation hood on and off. The pilot study revealed that a distance of 2 m from the use of wheat flour was required to control gluten contamination at ≤20 ppm if wheat flour had been in use for 4.0 h. The identified control of distance was tested in five different study sites. In each of the study sites, a test meal was prepared a minimum of 2 m away from the site of wheat flour use. Although kitchens vary and must be considered individually, the established control of a minimum 2 m distance, along with good hygiene practices, was found to be effective in preparing GF meals
Martino, Hércia Stampini Duarte; Carvalho, Ariela Werneck de; Silva, Cassiano Oliveira da; Dantas, Maria Inês de Souza; Natal, Dorina Isabel Gomes; Ribeiro, Sônia Machado Rocha; Costa, Neuza Maria Brunoro
In this study the chemical composition and iron bioavailability of hull and hull-less soybean flour from the new cultivar UFVTN 105AP was evaluated. The hemoglobin depletion-repletion method was used in Wistar rats. Soybean hull flour presented 37% more total dietary fiber and higher content of iron than hull-less soybean flour. The phytate:iron molar ratio, however, was 2-fold lower in the soybean hull flour in compared to the hull-less soybean flour. Animals fed soybean hull flour presented hemoglobin gains similar to those of the control diet group (p > 0.05). The Relative Biological Values of hull and hull-less soybean flour were 68.5% and 67.1%, respectively, compared to the control group. Heat-treated soybean hull flour (150 degrees C/30 minutes) showed high content of iron and low phytate, which favors the iron bioavailability. Thus, the soybean hull flour is a better source of dietary fiber and iron than hull-less soybean flour at comparable bioavailabilities.
Ullah, Fahim; Ahmad, Sajjad; Wahab, Said; Zeb, Alam; Khan Khattak, Mansoor; Khan, Saleem; Kang, Min
The effect of alfalfa seed flour supplementation on the quality characteristics of refined wheat flour-based biscuits was studied. The proximate composition of refined wheat flour and alfalfa seed flour was determined. Refined wheat flour contained 12.43% moisture, 11.52% crude protein, 1.61% crude fat, 0.71% crude fiber, 1.43% ash and 70.83% nitrogen free extract, while alfalfa seed flour contained 5.79%, 29.49%, 12.71%, 5.53%, 4.80% and 41.73% moisture, crude protein, crude fat, crude fiber, ash and nitrogen free extract correspondingly. Alfalfa seed flour at 5%, 10%, 15% and 20% supplementation levels was incorporated in refined wheat flour to produce composite flour. The biscuits prepared were subjected to quality evaluation. Physical analysis of biscuits disclosed that supplementation of alfalfa seed flour decreased the width from 47.25 to 42 mm and the spread factor from 62.7 to 53.12, while it increased the thickness from 7.53 to 8.10 mm. Supplementation of refined wheat flour–based biscuits with alfalfa seed flour at different inclusion levels significantly (p < 0.05) increased the crude protein content from 10.19% to 15.30%, the crude fiber content from 0.73% to 1.62%, the crude fat content from 17.46% to 21.59% and the ash content from 1.37% to 1.92%, whereas it decreased the moisture content from 3.57% to 3.26% and the nitrogen free extract from 66.90% to 59.32%. The effect of supplementation on the mineral contents of biscuits was also significant (p < 0.05). Potassium, magnesium, calcium, iron and zinc contents increased from 105.30, 14.65, 43.91, 3.74 and 0.94 to 145.00, 26.64, 79.60, 7.93 and 1.60 mg/100 g, respectively. Sensory evaluation revealed that the quality score of biscuits in terms of color, taste, texture and overall acceptability decreased with increased supplementation. The present research work confirmed that a maximum of 10% alfalfa seed flour supplementation in refined wheat flour could produce acceptable biscuits with an
Li, Guantian; Zhu, Fan
There has been growing interest in whole grain quinoa flour for new product development due to the unique nutritional benefits. The quality of quinoa flour is much determined by the properties of its major component starch as well as non-starch components. In this study, composition and physicochemical properties of whole grain flour from 7 quinoa samples have been analyzed. Flour properties have been correlated to the flour composition and the properties of isolated quinoa starches through chemometrics. Great variations in chemical composition, swelling power, water soluble index, enzyme susceptibility, pasting, gel texture, and thermal properties of the flour have been observed. Correlation analysis showed that thermal properties and enzyme susceptibility of quinoa flour are highly influenced by the starch. Interactions of starch with non-starch components, including lipids, protein, dietary fibre, phenolics, and minerals, greatly impacted the flour properties. For example, peak gelatinization temperature of the flour is positively correlated to that of the starch (r=0.948, p<0.01) and negatively correlated to the lipid content (r=-0.951, p<0.01). Understanding the roles of starch and other components in physicochemical properties of quinoa flour provides a basis for better utilization of this specialty crop. Copyright © 2016 Elsevier Ltd. All rights reserved.
Charles R. Frihart; Holly Satori
Soy flour adhesives using polyamidoamine-epichlorohydrin (PAE) resin as the curing agent are being used commercially to make bonded wood products. The original studies on the soy-PAE adhesives used purified soy protein isolate, but the much lower cost soy flour is now used commercially. We examined the performance of commercially available soy flours that have their...
Noor Aziah, A A; Komathi, C A
This study was intended to investigate the potential of peeled and unpeeled pumpkin pulp as a raw material for the production of flour that could be used in composite blend with wheat flour or as a functional ingredient in food products. The peeled and unpeeled pumpkin pulp were soaked in sodium metabisulphite solution, sliced and dried overnight in a hot air oven, followed by milling into peeled pumpkin pulp flour (PPPF) and unpeeled pumpkin pulp flour (UPPF), respectively. The flours were then evaluated for physicochemical attributes (color, proximate compositions, and water activity) and functional properties (water holding capacity and oil holding capacity), in comparison to the commercial wheat flour. PPPF and UPPF were observed to be more attractive in terms of color than wheat flour, as indicated by the significantly higher results (P
Zhao, Ting; Liu, Dong; Ren, Hengfei; Shi, Xinchi; Zhao, Nan; Chen, Yong; Ying, Hanjie
In this study, a fibrous bed bioreactor (FBB) was used for D-lactic acid (D-LA) production by Sporolactobacillus inulinus Y2-8. Corn flour hydrolyzed with α-amylase and saccharifying enzyme was used as a cost-efficient and nutrient-rich substrate for D-LA production. A maximal starch conversion rate of 93.78% was obtained. The optimum pH for D-LA production was determined to be 6.5. Ammonia water was determined to be an ideal neutralizing agent, which improved the D-LA production and purification processes. Batch fermentation and fedbatch fermentation, with both free cells and immobilized cells, were compared to highlight the advantages of FBB fermentation. In batch mode, the D-LA production rate of FBB fermentation was 1.62 g/l/h, which was 37.29% higher than that of free-cell fermentation, and the D-LA optical purities of the two fermentation methods were above 99.00%. In fed-batch mode, the maximum D-LA concentration attained by FBB fermentation was 218.8 g/l, which was 37.67% higher than that of free-cell fermentation. Repeated-batch fermentation was performed to determine the long-term performance of the FBB system, and the data indicated that the average D-LA production rate was 1.62 g/l/h and the average yield was 0.98 g/g. Thus, hydrolyzed corn flour fermented by S. inulinus Y2-8 in a FBB may be used for improving D-LA fermentation by using ammonia water as the neutralizing agent.
Aprodu, Iuliana; Banu, Iuliana
Millet has long been known as a good source of fiber and antioxidants, but only lately started to be exploited by food scientists and food industry as a consequence of increased consumer awareness. In this study, doughs and breads were produced using millet flour in different ratios (10, 20, 30, 40, and 50%) to white, dark, and whole wheat flour. The flour blends were evaluated in terms of rheological and thermo-mechanical properties. Fundamental rheological measurements revealed that the viscosity of the flour formulations increases with wheat flour-extraction rate and decreases with the addition of millet flour. Doughs behavior during mixing, overmixing, pasting, and gelling was established using the Mixolab device. The results of this bread-making process simulation indicate that dough properties become critical for the flour blends with millet levels higher than 30%. The breads were evaluated for volume, texture, and crumb-grain characteristics. The baking test and sensory evaluation results indicated that substitution levels of up to 30% millet flour could be used in composite bread flour. High levels of millet flour (40 and 50%) negatively influenced the loaf volume, crumb texture, and taste. © The Author(s) 2014.
Hurrell, Richard; Ranum, Peter; de Pee, Saskia; Biebinger, Ralf; Hulthen, Lena; Johnson, Quentin; Lynch, Sean
Iron fortification of wheat flour is widely used as a strategy to combat iron deficiency. To review recent efficacy studies and update the guidelines for the iron fortification of wheat flour. Efficacy studies with a variety of iron-fortified foods were reviewed to determine the minimum daily amounts of additional iron that have been shown to meaningfully improve iron status in children, adolescents, and women of reproductive age. Recommendations were computed by determining the fortification levels needed to provide these additional quantities of iron each day in three different wheat flour consumption patterns. Current wheat flour iron fortification programs in 78 countries were evaluated. When average daily consumption of low-extraction (< or = 0.8% ash) wheat flour is 150 to 300 g, it is recommended to add 20 ppm iron as NaFeEDTA, or 30 ppm as dried ferrous sulfate or ferrous fumarate. If sensory changes or cost limits the use of these compounds, electrolytic iron at 60 ppm is the second choice. Corresponding fortification levels were calculated for wheat flour intakes of < 150 g/day and > 300 g/day. Electrolytic iron is not recommended for flour intakes of < 150 g/day. Encapsulated ferrous sulfate or fumarate can be added at the same concentrations as the non-encapsulated compounds. For high-extraction wheat flour (> 0.8% ash), NaFeEDTA is the only iron compound recommended. Only nine national programs (Argentina, Chile, Egypt, Iran, Jordan, Lebanon, Syria, Turkmenistan, and Uruguay) were judged likely to have a significant positive impact on iron status if coverage is optimized. Most countries use non-recommended, low-bioavailability, atomized, reduced or hydrogen-reduced iron powders. Most current iron fortification programs are likely to be ineffective. Legislation needs updating in many countries so that flour is fortified with adequate levels of the recommended iron compounds.
Choi, Induck; Kang, Chun-Sik; Cheong, Young-Keun; Hyun, Jong-Nae; Kim, Kee-Jong
Normal (cv. Keumkang, KK) and waxy-type (cv. Shinmichal, SMC) whole wheat flour was substituted at 20 and 40% for white wheat flour (WF) during bread dough formulation. The flour blends were subjected to dough and baking property measurement in terms of particle size distribution, dough mixing, bread loaf volume and crumb firmness. The particle size of white wheat flour was the finest, with increasing coarseness as the level of whole wheat flour increased. Substitution of whole wheat flour decreased pasting viscosity, showing all RVA parameters were the lowest in SMC40 composite flour. Water absorption was slightly higher with 40% whole wheat flour regardless of whether the wheat was normal or waxy. An increased mixing time was observed when higher levels of KK flour were substituted, but the opposite reaction occurred when SMC flour was substituted at the same levels. Bread loaf volume was lower in breads containing a whole wheat flour substitution compared to bread containing only white wheat flour. No significant difference in bread loaf volume was observed between normal and waxy whole flour, but the bread crumb firmness was significantly lower in breads containing waxy flour. The results of these studies indicate that up to 40% whole wheat flour substitution could be considered a practical option with respect to functional qualities. Also, replacing waxy whole flour has a positive effect on bread formulation over normal whole wheat flour in terms of improving softness and glutinous texture. PMID:24471084
Agama-Acevedo, Edith; Islas-Hernandez, José J; Osorio-Díaz, Perla; Rendón-Villalobos, Rodolfo; Utrilla-Coello, Rubí G; Angulo, Ofelia; Bello-Pérez, Luis A
Banana is a starchy food that contains a high proportion of undigestible compounds such as resistant starch and nonstarch polysaccharides. Products with low glycemic response such as pasta are considered favorable to health. The objective of this study was to use unripe banana flour to make spaghetti with low-carbohydrates digestibility and evaluate its physical and texture characteristics, as well as consumer preference. Formulations with 100% durum wheat semolina (control) and formulations with 3 semolina: banana flour ratios (85: 15, 70: 30, and 55: 45) were prepared for spaghetti processing. The use of banana flour decreased the lightness and diameter of cooked spaghetti, and increased the water absorption of the product. Hardness and elasticity of spaghetti were not affected by banana flour, but adhesiveness and chewiness increased as the banana flour level in the blend rose. Spaghettis prepared in the laboratory (control and those with banana flour) did not show differences in preference by consumers. In general, the preference of spaghettis with different banana flour level was similar. The addition of a source of undigestible carbohydrates (banana flour) to spaghetti is possible without affecting the consumer preference.
Anandito, R. B. K.; Kurniawan, S. R.; Nurhartadi, E.; Siswanti
Indonesia is a natural disaster-prone country. Food availability appears as the post-disaster main problem. Emergency food is an effort to overcome it. An ideal emergency food is expected to have a complete nutritional composition. Fulfilling macronutrient needs, proso millet flour and snakehead fish-tempeh flour koya were being used in this research. The objective of this research was to determine the formulation of emergency food in biscuit form made from proso millet flour and snakehead fish-tempeh flour koya based on its sensory, chemical and physical properties. This research was using a completely randomized design with one factor affecting. The variations of proso millet flour and snakehead fish-tempeh flour koya composition were 100:0 ; 80:20 ; 60:40 ; and 40:60. All treatments were carried out sensory evaluation using hedonic test, proximate analysis, calories analysis using bomb calorimetry methods. and physical analysis using texture profile analyzer. The compensatory model was used to determine the best formula based on all parameters. The result indicated that the best biscuit formula had compositions of proso millet flour 80% and snakehead fish-tempeh flour koya 20%. It had a brownish color, not-strong-fishy aroma, a strong-enough bitter aftertaste and crunchy texture. Chemical analysis showed that its moisture, ash, protein, fat, carbohydrate and total calories content were 1,146%; 4,827%; 12,536%; 26,325%; 56,312% and 5,033 kcal/gram, respectively. The physical analysis shows that its hardness and fracturability values were 8,037 N and 2,403 N, respectively.
Singh, Arashdeep; Sharma, Savita; Singh, Baljit
Grain activation is a natural processing technique that can be used to produce modified flours without chemical modification. Functional characteristics of brown rice flour as influenced by grain activation time and temperatures were investigated. Germination temperatures at 25 ℃, 30 ℃ and 35 ℃ and time for 12, 24, 36 and 48 h significantly influenced the functional properties of flour with modification of starch, protein and high enzymatic activity. Significant decrease in the bulk density, water absorption and swelling power of brown rice flour was observed in comparison to non-germinated flour. Gel consistency and oil absorption capacity of brown rice flour increased as the grain activation time and temperature were increased. Native flour had lowest emulsion and foaming properties, while increase in grain activation time and temperature enhanced the emulsifying and foaming properties of flour. Paste clarity of native flour was 54% which was reduced to 25.17%; however, increase in germination time and temperature increased the % synersis values of germinated flour. Native flour had least gelation concentration of 12% which increased to 25% after 48 h of germination at 35 ℃. Overall, germination can be used as a natural way to modify the functional properties of brown rice flours for their utilization in variety food products.
Rai, Sweta; Kaur, Amarjeet; Singh, Baljit; Minhas, K S
Rice (Oryza sativa) flour and maize (Zea mays) meal substitution in wheat (Triticum aestivum) flour, from 0 to 100% each, for the production of bread was investigated. The proximate analysis, pasting properties, bread making qualities of raw materials and sensory evaluation of the bread samples were determined. The pasting temperature increased with increased percentage of rice flour and maize meal. But the other pasting characters decreased with the higher proportion of rice flour. The baking absorption was observed to increase with higher level of maize meal but it decreased when level of rice flour was increased. Loaf weight (g) decreased with progressive increase in the proportion of maize meal but increased when rice flour incorporation was increased. Loaf volume, loaf height and specific volume decreased for progressively higher level of maize meal and rice flour. The sensory evaluation revealed that 25% replacement of wheat flour was found to be more acceptable than control sample.
Sur, R; Nagi, H P; Sharma, S; Sekhon, K S
Sound and sprouted flours (24 and 48 hr) from bread wheat (WL-1562), durum wheat (PBW-34) and triticale (TL-1210) were stored at room temperature (34.8 degrees C) and relative humidity (66.7%) for 0, 45, 90 and 135 days to assess the changes in physico-chemical and baking properties. Protein, gluten, sedimentation value, starch and crude fat decreased during storage in all the samples; however, the decrease was more in sprouted flours. Free amino acids, proteolytic activity, diastatic activity and damaged starch decreased with increase in storage period. Total sugars and free fatty acids increased more rapidly in the flours of sprouted wheats during 135 days of storage. Loaf volume of breads decreased during storage in both sound and sprouted flour but the mean percent decrease in loaf volume was more in stored sound flours. Aging of sprouted flour for 45 days improved the cookie and cake making properties but further storage was of no value for these baked products. Chapati making properties of stored sound and sprouted flour were inferior to that of fresh counterparts.
Mohajan, Suman; Orchy, Tania N; Farzana, Tasnim
The research study was conducted to evaluate the effect of soy flour on functional, nutritional, and sensory properties of mushroom-moringa-supplemented soup which could be used as a protein-supplemented ready-to-eat food. In this study, corn flour was supplemented with soy flour at different levels such as 20% (T4), 15% (T3), 10% (T2), and 5% (T1), and without soy flour was kept as control (T0). Fixed amount of mushroom and moringa leaf powder was added in all soup powders. Soup powders were analyzed for functional, nutritional, and sensory parameters. Bulk density (0.82-0.74 g/ml), dispersibility (82.1%-75.9%), pH (6.17-6.13), swelling capacity (3.98-3.65 ml/g), and viscosity were decreased, while water absorption capacity (70%-94%) was increased with increasing of soy flour percentages. Protein content of all the treatment groups increased from 10.66% to 19.97% along with a significant increased in fat (1.43%-6.97%), fiber (1.10%-2.30%), ash (15.77%-16.40%), and energy value (328.38-353.21 kcal/100 g) while decreased in moisture and carbohydrate content. On sensory evaluation, soup powders with 10% (T2) level of soy flour incorporation had highest scores for all the sensory attributes evaluated. Based on these results, it can be concluded that soy flour has effect on functional, nutritional, and sensory properties of soup powders and 10% supplementation of soy flour is suitable for ready-to-eat soup formulation. Besides these, use of mushroom and moringa leaf may also increase its nutritional value. Soup developed in this way may be sufficient to meet day-to-day nutritional requirements as a supplement.
El-Adawy, T A; Taha, K M
The nutritional quality and functional properties of paprika seed flour and seed kernel flours of pumpkin and watermelon were studied, as were the characteristics and structure of their seed oils. Paprika seed and seed kernels of pumpkin and watermelon were rich in oil and protein. All flour samples contained considerable amounts of P, K, Mg, Mn, and Ca. Paprika seed flour was superior to watermelon and pumpkin seed kernel flours in content of lysine and total essential amino acids. Oil samples had high amounts of unsaturated fatty acids with linoleic and oleic acids as the major acids. All oil samples fractionated into seven classes including triglycerides as a major lipid class. Data obtained for the oils' characteristics compare well with those of other edible oils. Antinutritional compounds such as stachyose, raffinose, verbascose, trypsin inhibitor, phytic acid, and tannins were detected in all flours. Pumpkin seed kernel flour had higher values of chemical score, essential amino acid index, and in vitro protein digestibility than the other flours examined. The first limiting amino acid was lysine for both watermelon and pumpkin seed kernel flours, but it was leucine in paprika seed flour. Protein solubility index, water and fat absorption capacities, emulsification properties, and foam stability were excellent in watermelon and pumpkin seed kernel flours and fairly good in paprika seed flour. Flour samples could be potentially added to food systems such as bakery products and ground meat formulations not only as a nutrient supplement but also as a functional agent in these formulations.
Kim, Eun-Jung; Kim, Hyun-Seok
Untreated and pectinase-treated potato flours from Atlantic and Superior cultivars were characterised to identify the effects of pectinase treatment on their physicochemical properties. Steam-cooked potato whole-tissues were treated with and without pectinase to prepare the dehydrated potato flours. Untreated and pectinase-treated potato flours were investigated with respect to morphology, chemical composition, starch leaching, swelling power, gelatinization, and pasting viscosity. Upon viewing with scanning electron microscopy and light microscopy, the pectinase-treated (relative to untreated) potato flours revealed that the retrograded starch materials were present in intact parenchyma cells, apparently exhibiting granular structures. Their protein and ash contents were reduced through pectinase treatment. While starch leachate contents were lower for the pectinase-treated potato flours, the opposite trend in swelling powers was observed. Pectinase-treated potato flours exhibited higher melting temperatures and pasting viscosities than untreated counterparts. Overall, the modification of potato flour morphology by pectinase treatment may result in alteration of physicochemical properties of potato flours. Copyright © 2014 Elsevier Ltd. All rights reserved.
García-Álvarez, J.; Rosell, C. M.; García-Hernández, M. J.; Chávez, J. A.; Turó, A.; Salazar, J.
Many varieties of bread are prepared using flour coming from wheat. However, there are other types of flours milled from rice, legumes and some fruits and vegetables that are also suitable for baking purposes, used alone or in combination with wheat flour. The type of flour employed strongly influences the dough consistency, which is a relevant property for determining the dough potential for breadmaking purposes. Traditional methods for dough testing are relatively expensive, time-consuming, off-line and often require skilled operators. In this work, ultrasonic analysis are performed in order to obtain acoustic properties of bread dough samples prepared using two different types of flour, wheat flour and rice flour. The dough acoustic properties can be related to its viscoelastic characteristics, which in turn determine the dough feasibility for baking. The main advantages of the ultrasonic dough testing can be, among others, its low cost, fast, hygienic and on-line performance. The obtained results point out the potential of the ultrasonic analysis to discriminate doughs of different types of flour.
Cunningham, H M; Lawrence, G A; Tryphonas, L
Four experiments were conducted using weanling Wistar rats to determine whether chlorinated cake flour or its constituents were toxic. Levels of 0.2 and 1.0% chlorine added to unbleached cake flour significantly (p less than 0.01) reduced growth rate by 20.7 and 85.2% and increased liver weight relative to body weight by 16.7 and 25.3%, respectively. Lipids extracted from flour chlorinated at the same levels had similar effects. Rat chow diets containing 0.2 and 0.6% chlorine in the form of chlorinated wheat gluten reduced growth rate and increased liver weight as a percentage of body weight. A rat chow diet containing 0.2% chlorine as chlorinated flour lipids increased absolute liver weight by 40%, kidney by 20%, and heart by 10% compared to pair-fed controls.
Sakhare, Suresh D; Indrani, D; Inamdar, Aashitosh A; Gaikwad, Shwetha B; Rao, G Venkateswara
Bran dusters are used in the wheat flour milling process to increase flour extraction rate. Chemical, rheological and bread characteristics of bran duster flours (BDR1, BDR2, BDR3) and straight run flour (SRF) obtained from two commercial roller flour mills were analyzed. Important chemical characteristics such as ash, dry gluten content, sedimentation value, damaged starch and falling number of bran duster flours were determined. Rheological behavior was tested using farinograph and alveograph equipments. The results showed an increase in ash, dry gluten content and Zeleny's sedimentation value for bran duster flours compared to SRF. Rheological characteristics indicated higher farinograph dough development time and stability values for bran duster flours. Alveograph characteristics indicated higher extensibility and lower elasticity values for bran duster flours. Over all quality score of bread for BDR1 from A and B roller flour mills ranged from 73.4 to 74.7, BDR2 (79-81.8), BDR3 (69-70.4) as against SRF (85.4-86.3).
Flinn, Paul W; Campbell, James F
Cannibalism is a very important factor regulating population dynamics of the red flour beetle. After several days of feeding, the flour becomes conditioned by the beetles, which can affect rates of cannibalism. Flour conditioning is caused by an accumulation of feces, pheromones, and ethylquinone, which is a repellent produced by the beetles. We determined the effect of five different levels of flour conditioning on cannibalism of red flour beetle eggs and pupae by adult and larval stages. Larvae had the highest rates of egg cannibalism (12 eggs eaten over the 4-d period) followed by female adults (seven eggs consumed). Adult males had the lowest rates of cannibalism with only two eggs consumed. Cannibalism of eggs by females was correlated negatively with the level of flour conditioning. There was no effect of flour conditioning on egg or pupal cannibalism by larvae or adult males. Cannibalism by adult females may decrease as the level of flour conditioning increases because females may spend less time tunneling in highly conditioned flour and more time trying to disperse to other areas that are better for oviposition.
Buksa, Krzysztof; Nowotna, Anna; Ziobro, Rafał; Gambuś, Halina
The aim of the study was to investigate physical and chemical properties of preparations of water soluble arabinoxylans (arabinoxylan-enriched flour) obtained by industrial method and their derivatives (obtained by hydrolysis and cross-linking of aranbinoxylans), as well as their impact on baking properties of rye flours. Additionally, these results were compared with highly purified arabinoxylans prepared by laboratory method and well characterized in the literature. Flour enriched with arabinoxylans was obtained by industrial method involving air separation of flour particles. It was characterized by 8.6% arabinoxylan content, lack of insoluble material and substantial residue (67%) of starch and dextrins. The addition of all industrial method preparations in amount of 10% (i.e. approx. 1% water soluble arabinoxylans), to rye flours resulted in an increase in water absorption, bread volume and decrease in hardness of the bread crumb and the effect was especially strong in the case of flour type 720. Due to the easiness of isolation procedure, industrial method preparation could be advised as an improver for rye bread making. © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.
Servillo, Luigi; D'Onofrio, Nunzia; Giovane, Alfonso; Casale, Rosario; Cautela, Domenico; Ferrari, Giovanna; Castaldo, Domenico; Balestrieri, Maria Luisa
We report the LC-ESI-MS/MS determination of betaines in commercial flours of cereals and pseudocereals most utilized in human nutrition. Results showed that glycine betaine, trigonelline, proline betaine, N ε -trimethyllysine were metabolites common to all examined flours, whereas an uncommon betaine, valine betaine, and glutamine betaine were present only in flours of barley, rye, oat, durum wheat, winter wheat, Triticum dicoccum and Triticum monococcum. Valine betaine and glutamine betaine, the latter never reported before in plants and animals, are not evenly distributed in the Poaceae family, but their presence or absence in flours depends on the subfamily to which the plant belongs. Interestingly, we also report for the first time the occurrence of pipecolic acid betaine (homostachydrine) and its precursor 1,2-N-methylpipecolic acid in rye flour. These two metabolites were not detected in any other cereal or pseudocereal flour, suggesting their potential role as markers of rye flour occurrence in cereal-based foods. Copyright © 2017 Elsevier Ltd. All rights reserved.
Tabara, Aya; Nakagawa, Mariko; Ushijima, Yuki; Matsunaga, Kotaro; Seguchi, Masaharu
Heat-treated (120 °C for 120 min) rice flour showed high affinity to oil (oil-binding ability). This oil-binding ability could be observed by shaking the heat-treated rice flour (2.0 g), oil (4.0 mL), and water (20 mL) vigorously in a test tube, and the oil bound to the rice flour sank into the water. To examine the time-dependent levels of the oil-binding ability, rice flour was heat-treated at 120 °C for 10, 20, 40, 60, and 120 min, and the precipitated volume of oil/rice flour complex increased with an increase of the heating time. The oil-binding ability of the rice flour was not affected by the treatments with diethyl ether or boiled chloroform/methanol (2:1) solutions, which suggested no relationship to the oil in the rice flour, but was lost upon alkali (0.2% NaOH solution) or pepsin treatment, which suggested its relationship to the rice proteins.
Toews, Michael D.; Campbell, James F.; Arthur, Franklin H.
Experiments were conducted in tightly sealed pilot scale warehouses to assess the efficacy of common aerosolized insecticides on all life stages of Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae) when exposed in dishes containing 0 to 2 g of wheat flour either under pallets or out in the open. Petri dishes containing 0, 0.1, 1, or 2 g of flour were prepared with 25 eggs, 3rd instars, pupae, or adults and then immediately treated with aerosolized solvent, Pyrethrins, or esfenvalerate. Twenty-four h after insecticide exposure, the dishes were brought to the laboratory and placed in a growth chamber and held for a 3 day moribund (knockdown) assessment and a 21 day mortality assessment. Mortality in untreated controls was generally less than 10%, with the exception of the 21 day counts of adults and eggs. Solvent-treated replications followed similar trends, except that additional mortality was observed in exposed larvae and pupae. In the insecticide-treated dishes, mortality of T. castaneum provisioned with flour generally showed a linear decrease with increasing flour deposits. Regardless of life stage, mortality did not exceed 60% when individuals were exposed in petri dishes containing 2 g of flour. Exposure location also made a significant difference in observed mortality. While mortality never exceeded 75% in dishes positioned under pallets, there was never less than 80% mortality in dishes exposed in the open. Although there was a perceptible increase in mortality with esfenvalerate compared to Pyrethrins, these differences were considerably less than the variation observed among flour deposits. The study suggests that sanitation and preparation prior to aerosol insecticide treatments were more important than choice of a particular insecticide. PMID:21268701
Brown rice was blasted with rice flour rather than sand in a sand blaster to make microscopic nicks and cuts so that water can easily penetrate into the brown rice endosperm and cook the rice in a shorter time. The flour-blasted American Basmati brown rice, long grain brown rice, and parboiled long...
Padalino, Lucia; Mastromatteo, Marcella; Lecce, Lucia; Spinelli, Sara; Conte, Amalia; Del Nobile, M Alessandro
This work was focused on the optimization and characterization of maize-based spaghetti fortified with chickpea flour. To the aim, the study has been organized in two subsequent trials. In the first one, the chickpea flour amount added to the spaghetti was continuously increased until the overall sensory quality of pasta reached its sensory threshold. Spaghetti samples loaded with 15% chickpea flour showed poor elasticity and increased firmness, so this concentration represented the highest chickpea flour concentration to be used. The second experimental step was aimed to improve the overall sensory quality of the enriched spaghetti by means of hydrocolloids as pectin, guar flour and agar. Final pasta was characterized for the nutritional composition, the glycemic response and the main quality attributes. The best results were obtained by the addition of guar flour.
Correa, M J; Salinas, M V; Carbas, B; Ferrero, C; Brites, C; Puppo, M C
Algarroba flour is used to supplement lysine-limiting systems such as wheat flour due to its amino acidic composition. The effects of adding up to 30% of this flour to wheat flour (W-A30) on dough characteristics and breadmaking performance were studied. Dough rheology was tested by farinograph, oscillatory rheometry and texture profile analyses. Molecular mobility was evaluated by nuclear magnetic resonance, and thermal properties were analyzed by differential scanning calorimetry and viscoamylograph studies. Besides, different bread quality parameters were evaluated. Incorporation of algarroba flour resulted into increase in water absorption, development time and degree of softening, and decrease in stability of wheat flour, leading to softer, less adhesive and elastic dough, although at intermediate replacement levels cohesiveness improved. At the molecular level, a reduction of water activity and limited proton motion were observed in W-A30 samples, suggesting that protons were highly bound to the dough matrix. Dough samples with algarroba flour showed lower G' and G″ values than the control, although with the formation of a more elastic structure for W-A30. In addition, algarroba flour produced a protective effect on starch granule disruption and interfered with amylose-amylose association during cooling. The specific volume of breads decreased with the increase in algarroba level, W-A30 reaching the highest decrease (15%). Bread crumbs with algarroba flour exhibited higher values of hardness and resilience. The use of algarroba flour resulted in lower quality when compared to the control. However, algarroba flour at 20% level can be added to wheat flour to obtain bakery products of similar technological quality and with improved nutritional components.
Levinson, H. Z.; Mori, K.
Olfactory perception and orientation behaviour of female and male flour beetles ( Tribolium castaneum, T. confusum) to single stereoisomers of their aggregation pheromone revealed maximal receptor potentials and optimal attraction in response to 4R,8R-(-)-dimethyldecanal, whereas its optical antipode 4S,8S-(+)-dimethyldecanal was found to be inactive in this respect. Female flour beetles of both species were ≈ 103 times less attracted to 4R,8S-(+)- and 4S,8R-(-)-dimethyldecanal than to 4R,8R-(-)-dimethyldecanal, while male flour beetles failed to respond to the R,S-(+)- and S,R-(-)-stereoisomers. Pheromone extracts of prothoracic femora from unmated male flour beetles elicited higher receptor potentials in the antennae of females than in those of males. The results suggest that the aggregation pheromone emitted by male T. castaneum as well as male T. confusum has the stereochemical structure of 4R,8R-(-)-dimethyl-decanal, which acts as sex attractant for the females and as aggregant for the males of both species.
Rodríguez-Marín, María L; Bello-Pérez, Luis A; Yee-Madeira, Hernani; Zhong, Qixin; González-Soto, Rosalía A
Rice and banana flours are inexpensive starchy materials that can form films with more improved properties than those made with their starch because flour and starch present different hydrophobicity. Montmorillonite (MMT) can be used to further improve the properties of starch-based films, which has not received much research attention for starchy flours. The aim of this work was to evaluate the mechanical and barrier properties of nanocomposite films of banana and rice flours as matrix material with addition of MMT as a nanofiller. MMT was modified using citric acid to produce intercalated structures, as verified by the X-ray diffraction pattern. The intercalated MMT was blended with flour slurries, and films were prepared by casting. Nanocomposite films of banana and rice flours presented an increase in the tensile at break and elongation percentage, respectively, more than their respective control films without MMT. This study showed that banana and rice flours could be alternative raw materials to use in making nanocomposite films. Copyright © 2013 Elsevier B.V. All rights reserved.
Narukawa, Tomohiro; Hioki, Akiharu; Chiba, Koichi
A monitoring test for arsenic species in white rice flour was developed and applied to flours made from 20 samples of polished rice collected from locations all over Japan. The arsenic species in white rice flour made from five samples each of four types of rice were analyzed by HPLC-ICP-MS after a heat-assisted aqueous extraction. The total arsenic and major and minor element concentrations in the white rice flours were measured by ICP-MS and ICP-OES after microwave-assisted digestion. 91 ± 1% of the arsenic in the flours was extractable. Concentrations of arsenite [As(III)], arsenate [As(V)], and dimethylarsinic acid (DMAA) were closely positively correlated with the total arsenic concentrations. The total arsenic concentration in flours made from rice collected around Japan was 0.15 ± 0.07 mg kg(-1) (highest, 0.32 mg kg(-1)), which is very low. It was thus confirmed that the white rice flour samples collected in this experiment were not suffered from noticeable As contamination.
Lu, Jingjing; Yang, Dajin
To study the deoxynivalenol (DON) contamination status in wheat flour of China in 2013. Stereotypes packaged or bulk wheat flour samples sold in 28 provinces were collected in a random sampling way. The concentration of DON in each flour wheat sample was measured by high performance liquid chromatography. The results were statistically analyzed and evaluated. A total of 5678 wheat flour was detected. The detection rate of DON was 58.74%. The excessive rate of the standard of DON was 4.60%. The average content of DON was 317 µg/kg. The content range of DON was 0-56.1 mg/kg. DON pollution is relatively common in wheat flour of China in 2013, but the excessive rate is not high. The degree of pollution in each area is different. The excessive rate of DON, which was associated with the local temperature and humidity conditions, in wheat flour sold in east, southwest and northwest area is relatively high. Pollution level of DON in wheat flour in 2013 is consistent with those in 2010 and 2011, but lower than the monitoring results in 2012.
Quality characteristics of Chinese steamed bread (CSB) prepared from two soft red winter (SRW) wheat flours blended with 0-30% waxy wheat flour (WWF) were determined to estimate the influence of starch amylose content. The increased proportion of WWF in blends raised mixograph absorption with insign...
... HUMAN CONSUMPTION CEREAL FLOURS AND RELATED PRODUCTS Requirements for Specific Standardized Cereal Flours and Related Products § 137.260 Enriched corn meals. (a) Enriched corn meals are the foods, each of... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Enriched corn meals. 137.260 Section 137.260 Food...
... HUMAN CONSUMPTION CEREAL FLOURS AND RELATED PRODUCTS Requirements for Specific Standardized Cereal Flours and Related Products § 137.260 Enriched corn meals. (a) Enriched corn meals are the foods, each of... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Enriched corn meals. 137.260 Section 137.260 Food...
... HUMAN CONSUMPTION CEREAL FLOURS AND RELATED PRODUCTS Requirements for Specific Standardized Cereal Flours and Related Products § 137.260 Enriched corn meals. (a) Enriched corn meals are the foods, each of... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Enriched corn meals. 137.260 Section 137.260 Food...
... HUMAN CONSUMPTION CEREAL FLOURS AND RELATED PRODUCTS Requirements for Specific Standardized Cereal Flours and Related Products § 137.260 Enriched corn meals. (a) Enriched corn meals are the foods, each of... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Enriched corn meals. 137.260 Section 137.260 Food...
... HUMAN CONSUMPTION CEREAL FLOURS AND RELATED PRODUCTS Requirements for Specific Standardized Cereal Flours and Related Products § 137.260 Enriched corn meals. (a) Enriched corn meals are the foods, each of... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Enriched corn meals. 137.260 Section 137.260 Food...
Stobnicka, Agata; Górny, Rafał L.
Exposure to flour dust can be found in the food industry and animal feed production. It may result in various adverse health outcomes from conjunctivitis to baker's asthma. In this paper, flour dust exposure in the above-mentioned occupational environments is characterized and its health effects are discussed. A peer-reviewed literature search was carried out and all available published materials were included if they provided information on the above-mentioned elements. The hitherto conducted studies show that different components of flour dust like enzymes, proteins and baker's additives can cause both non-allergic and allergic reactions among exposed workers. Moreover, the problem of exposure to cereal allergens present in flour dust can also be a concern for bakers’ family members. Appreciating the importance of all these issues, the exposure assessment methods, hygienic standards and preventive measures are also addressed in this paper. PMID:26414680
Singh, Mukti; Byars, Jeffrey A; Liu, Sean X
Whole navy bean flour and its fine and coarse particle size fractions were used to completely replace wheat flour in cakes. Replacement of wheat flour with whole bean flour significantly increased the protein content. The protein content was adjusted to 3 levels with navy bean starch. The effect of navy bean flour and its fractions at 3 levels of protein on cake batter rheology and cake quality was studied and compared with wheat flour samples. Batters prepared from navy bean flour and its fractions had higher viscosity than the cake flour. Reducing the protein content by addition of starch significantly lowered the viscosity of cake batters. The whole navy bean flour and coarse bean fraction cakes were softer than cakes made with wheat flour but had reduced springiness. Principal component analysis showed a clear discrimination of cakes according to protein. It also showed that low protein navy bean flour cakes were similar to wheat flour cakes. Navy bean flour with protein content adjusted to the level of cake (wheat) flour has potential as a healthy alternative in gluten-free cakes. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.
Guénard-Bilbault, L; Kanny, G; Moneret-Vautrin, D
Wheat flour is a basic foodstuff. Food allergy has been especially described in children, in the form of atopic dermatitis. Food allergy in adults is rare and especially described in the form of anaphylactic shock sometimes induced by effort. Four observations of adult food allergy are presented. The IgE dependent mechanism is documented. The positive oral provocation tests needed doses of 17 to 30 grams. One crossed sensitivity between rye and barley was seen. The major allergen was probably gluten, particularly gliadines. Sensitization was probably due to prolonged inhalation of wheat flour. The authors stress the possibility of food allergy to wheat flour by other mechanisms, the difficulty of diagnosis, needed for a diet without cereal and gluten that is now non reimbursable.
Peanut flour is a high protein, low oil, powdered material prepared from roasted 21 peanut seed. In addition to being a well-established food ingredient, peanut flour is also the 22 active ingredient in peanut oral immunotherapy trials. Enzymatic hydrolysis was evaluated as a 23 processing strategy ...
Hutasoit, M. S.; Julianti, E.; Lubis, Z.
The purple-fleshed sweet-potato (PFSP) flour was produced by varying pretreatment of washed chips: dipping in 0.5 and 1.0% (w/v) citric acid solution for 30 min, dipping in 0.5 and 1.0% (w/v) citric acid solution for 30 min and followed by steam blanching for 5 min. The pretreatment effect on cake quality was investigated. The results showed that PFSP flour produced from pretreatment with dipping in 0.5% citric acid for 30 min followed by steam blanching for 5 min had higher lightness (L*) value and lower browning index, higher hedonic value of color and aroma and baking expansion. The specific volume of cake from pretreated flour, untreated flour and wheat flour were 44.87, 43.83, and 50.43cm3/g, respectively. The sensory evaluation of cake indicated that cake from pretreated PFSP flour was acceptable compare to those of cake from wheat flour.
Ma, Lan; Zhao, Xin; Zhou, Shuang; Yang, Dajin
To establish a determination method for aluminium in flour foods with photometric method. After samples being treated with microwave digestion and wet digestion, aluminium in staple flour foods was determined by photometric method. There was a good linearity of the result in the range of 0.25 - 5.0 microg/ml aluminium, r = 0.9998; limit of detection (LOD) : 2.3 ng/ml; limit of quantitation (LOQ) : 7 ng/ml. This method of determining aluminium in flour foods is simple, rapid and reliable.
Fiedler, John L; Afidra, Ronald; Mugambi, Gladys; Tehinse, John; Kabaghe, Gladys; Zulu, Rodah; Lividini, Keith; Smitz, Marc-Francois; Jallier, Vincent; Guyondet, Christophe; Bermudez, Odilia
The economic feasibility of maize flour and maize meal fortification in Kenya, Uganda, and Zambia is assessed using information about the maize milling industry, households' purchases and consumption levels of maize flour, and the incremental cost and estimated price impacts of fortification. Premix costs comprise the overwhelming share of incremental fortification costs and vary by 50% in Kenya and by more than 100% across the three countries. The estimated incremental cost of maize flour fortification per metric ton varies from $3.19 in Zambia to $4.41 in Uganda. Assuming all incremental costs are passed onto the consumer, fortification in Zambia would result in at most a 0.9% increase in the price of maize flour, and would increase annual outlays of the average maize flour-consuming household by 0.2%. The increases for Kenyans and Ugandans would be even less. Although the coverage of maize flour fortification is not likely to be as high as some advocates have predicted, fortification is economically feasible, and would reduce deficiencies of multiple micronutrients, which are significant public health problems in each of these countries. © 2013 New York Academy of Sciences.
Gluten-free pancakes were prepared using rice flour, and rice flour replaced with various amounts, at 10, 20 and 40%, of sweet potato flour. The apparent viscosity of the pancake batter increased with increased sweet potato flour replacement. Texture properties of the cooked pancakes, such as, har...
Singh, Ripudaman; Chatli, Manish K; Biswas, Ashim K; Sahoo, Jhari
The aim of the present study was to compare the nutritional, processing and sensory characteristics of low-fat ω-3 enriched fatty acids chicken meat patties (CMP) prepared with the incorporation of 4% linseed flour (T1), 2% canola flour (T2), 3% linseed oil (T3), and 4% canola oil (T4) and to estimate their cost of production. The total fat and crude fiber content was increased (P < 0.05) with the incorporation of linseed flour. The emulsion stability and cooking yield was greater (P < 0.05) in T4 among all the treatments. The percent shrinkage was lower (P < 0.05) in linseed/canola oil incorporated CMP than their respective flours. The colour and appearance and flavour scores were lower (P < 0.05) in canola flour than canola oil incorporated CMP. The texture scores were not influenced (P < 0.05) in linseed-and canola-treated products. The overall acceptability was greatest (P < 0.05) in T4 whereas, lowest (P < 0.05) in T2 among all treated products. The cost of production was increased by 3-5% with the incorporation of linseed and canola oil whereas it was almost same for control and linseed flour.
Sadighi, J; Mohammad, K; Sheikholeslam, R; Amirkhani, M A; Torabi, P; Salehi, F; Abdolahi, Z
Anaemia is an important public health problem in Iran; therefore, a programme of flour fortification with iron was launched in two pilot provinces. The present study was conducted in January 2009 to evaluate the effectiveness and process of this programme. A 'before-and-after study' was conducted to evaluate the effectiveness of the flour fortification programme, and the process of the programme was evaluated using a cross-sectional study. To evaluate the effectiveness of the programme, blood haemoglobin and ferritin levels were measured in sample populations from Bushehr and Golestan provinces. The target population was women aged 15-49 years. Iron content was measured in samples of flour and bread to evaluate the flour fortification process in these two national pilot provinces. The total study population was 600 women from Bushehr province and 652 women from Golestan province. Similar trends were found in the indicators of anaemia/iron deficiency among the women studied in both provinces. The flour fortification programme only appears to have had a beneficial effect on ferritin levels (iron deficiency) in the two provinces. The prevalence of iron-deficiency anaemia before and after the intervention did not differ significantly in either province. Interestingly, the prevalence of anaemia (low haemoglobin) was significantly higher after the intervention in women from both provinces. The coverage of fortified flour and bread was 90% and 98.7% in Bushehr province, and 94.1% and 95% in Golestan province, respectively. In areas where anaemia is not mainly due to iron deficiency, an iron fortification programme might decrease the prevalence of iron deficiency without affecting the prevalence of anaemia.
Saleh, Mohammed; Al-Ismail, Khalid; Ajo, Radwan
This study investigated the effects of substituting wheat flour with fractions of different starch types and egg levels on pasta quality. First order mixture response surface model was used where the effects of various starch types and egg levels on pasta quality were evaluated. Coefficients of estimation were determined and fractional contribution of wheat, starch type and egg levels were evaluated. Egg levels negatively (p < .05) impacted treatments pasting viscosities, except in potato starch and rice flour. Stabilized rice bran peak viscosity increased from 215.0 to 3420.0 cP with decrease in egg level from 33 to 0%. Flow behavior index of treatments solution with various fractions of starch types and egg level ranged from 0.34 to 1.42 and was significantly (p < .05) lower than control (i.e., 2.15) indicating a better fit as a shear thinning model. Water holding capacity values of acorn starch and lupine flour were the greatest among treatment ranging from 86.8% to 176.0% and from 83.3% to 152.0%, respectively. Results also showed a possible modification of cooked pasta quality including firmness, stickiness, cooking loss, and water uptake, keeping with consumer acceptability through varying starch type and egg level. Results show that flour and starch type and egg level interaction play significant role in pasta blends formulation. Moreover, substitution of wheat flour with acorn, native or modified corn and potato starches fractions, as well as with lupine, rice, tapioca, and stabilized rice bran flours would have significant effects on the physical properties and acceptability of various cereal products. For instance, the use of rice bran in potentially developed products would enhance the consumption of whole grain foods, resulting in improved intake of fiber and other healthy components. © 2016 Wiley Periodicals, Inc.
Shafi, Musarat; Baba, Waqas N; Masoodi, Farooq Ahmad; Bazaz, Rafiya
Proximate composition, mineral content, functional, pasting and antioxidant properties of water chestnut flour (WCF) were compared with refined wheat flour. WCF showed higher phenolic (4.25 gGAE/1000 g), flavonoid (1.92 g QE/1000 g) and mineral content (K, Mg, Zn, Cu) than wheat flour. WCF showed greater retrogradation tendency but lower peak viscosity than wheat flour. Wheat flour - WCF blends and cookies were evaluated for water activity, physical & textural properties. Water activity of cookies decreased significantly (0.415-0.311) with increase in level of WCF in wheat flour. Total phenolic content, flavonoid content and antioxidant activity (DPPH• scavenging capacity, FRAP) of WCF - wheat flour blends as well as their cookies was also determined. Baking led to a greater increase in DPPH• scavenging capacity of WCF cookies (33.8%) than WF cookies (25%). Baking had a similar effect on FRAP value. Wheat flour cookies showed a decrease of 51%, and 62% while WCF cookies showed a decrease of 36%, and 34% in TPC and TFC values respectively. WCF cookies thus showed better retention of antioxidant activities suggesting greater stability of WC phenolics than wheat phenolics. Sensory analysis showed cookies made from water chestnut (100%) had fair acceptability due to their characteristic flavor. Thus, water chestnut flour serves both as a gluten free as well as antioxidant rich flour for production of cookies.
Vu, Thanh-Hien; Bean, Scott; Hsieh, Chao-Feng; Shi, Yong-Cheng
Heat-moisture treatment (HMT) has been used to modify properties of sorghum starches. However, information is limited on the effects of HMT on the digestibility of starch and the concurrent changes in protein in sorghum flour. The objectives of this research were to identify heat-moisture conditions to increase the resistant starch (RS) content of sorghum flour and investigate changes in sorghum proteins and starch structure. Sorghum flours with different moisture contents (0, 125, 200, and 300 g kg -1 w.b.) were heated at three temperatures (100, 120 and 140 °C) and times (1, 2 and 4 h). HMT of sorghum flour increased its RS level. The flour treated at 200 g kg -1 moisture and 100 °C for 4 h had a high RS content (221 g kg -1 vs. 56 g kg -1 for the untreated flour). Starch was not gelatinized when sorghum flours heated at moisture content of 200 g kg -1 or below. Sorghum protein digestibility and solubility decreased during HMT. The increase in RS of sorghum flour upon HMT was attributed to enhanced amylose-lipid complexes and heat induced structural changes in its protein fraction. HMT can be used to increase RS content in sorghum flour without gelatinizing its starch, thereby providing sorghum flour with unique food applications. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.
Obadi, Mohammed; Zhu, Ke-Xue; Peng, Wei; Sulieman, Abdellatif A; Mahdi, Amer Ali; Mohammed, Khalid; Zhou, Hui-Ming
The objective of this work was to study the effect of ozone treatment on the quality of bread and its shelf life. Flour was treated with ozone gas a rate of 5 L/min for 5, 15, 25, 35, and 45 min. Baking studies showed that bread made from flour treated with ozone for 15 min exhibited improved quality properties (in terms of specific volume, bread color, and crumb cell numbers). Exposure to ozone for shorter times did not cause obvious changes in the major volatile compounds of bread. A shelf life tests showed that ozone gas treatment influenced the extent of starch crystallinity. The relative starch crystallinity of bread made from flour treated with ozone for 15 min was lower than the control value, as were the hardness, springiness, and cohesiveness. Microscopic examination of crumb structure revealed remarkable differences between control and treated breads. Although ozone is a naturally occurring substance found in the atmosphere, ozone can also be produced synthetically. Recently, ozone has come to be regarded as a new treatment for flour. Especially in countries where the chlorination is forbidden, ozone treatment may be of a great interest if it were associated with significant and reliable changes in flour. Ozone treatment of wheat flour tends to improve bread shelf life and quality in terms of physiochemical, baking properties, X-ray diffraction data, volatile compound levels, crumb structure, and textural characteristics. Given such findings, desirable shelf life and bread qualities may be achieved when ozone is used as a flour oxidant prior to bread baking. Analyses of the effects of ozone gas on treatment of flour on bread shelf life and quality would aid the production of high quality and extend the shelf life of bread. © 2017 Wiley Periodicals, Inc.
Norita Rahma, Istiana; Haris Pratama, Raja; Alfiyanti; Reynaldo Alwi, Deo; Astuti, Woro Indriani Setyo Tri; Hesti Wardhani, Dyah
Breadfruit has the high nutritional and carbohydrate content which is comparable with wheat, so it is potential to be processed as the breadfruit flour. However, some studies showed the breadfruit flour has low swelling power (SP) and water solubility (WS) compared to wheat. Hence, the flour required modification. The main purpose of this research was to increase the value of SP and WS on breadfruit flour through a fermentation process. Sterile breadfruit flour (50 g) was suspended using sterile distilled water in a 250 ml glass beaker to obtain the flour concentration of 25%, 30%, 35%, 40% and 45% (g/ml). A certain concentration of L. plantarum was added (5, 7.5, 10, and 12.5%, ml/ml) then incubated at 30°C for 24, 48, 72, 96 and 120 h. The obtained solid cake was washed before being dried. The effect of cultural concentration on swelling power (SP) and water solubility (WS) is presented in Figure 1. The optimum fermentation condition was achieved by a 35% concentration of breadfruit flour which fermented with 10% L. plantarum for 24 h fermentation. At this condition, all parameter showed an increase of carbohydrate, protein, SP and WS into 84.761, 3.776, 8.870% and 0.136%, respectively.
Chan, Hing Wan; Burgess Champoux, Teri; Reicks, Marla; Vickers, Zata; Marquart, Len
Objectives: Recent dietary guidance recommends that children consume at least three servings of whole-grains daily. This study examined whether white whole-wheat (WWW) flour can be partially substituted for refined-wheat (RW) flour in pizza crust without affecting consumption by children in a school cafeteria. Methods: Subjects included first to…
Kim, Young-Lim; Mun, Saehun; Park, Kwan-Hwa; Shim, Jae-Yong; Kim, Yong-Ro
The physicochemical properties of 4-α-glucanotransferase (4αGTase)-modified rice flours were examined by measuring the molecular weight distribution, moisture sorption isotherm, and melting enthalpy of ice crystals. The results obtained by measuring the moisture sorption isotherm and melting enthalpy of ice crystals revealed that 4αGTase-modified rice flours had high water binding capacity than that of control rice flour. When the textural properties of noodles containing 4αGTase-treated rice flours after freeze-thaw cycling were measured by texture profile analysis, the textural properties of control noodle deteriorated. However, those of noodle with 4αGTase-modified rice flours were retained. For the melting enthalpy of ice crystals formed within cooked noodles, 4αGTase-treated rice flour showed similar effect to sucrose for reducing the melting enthalpy of ice crystals, however, the texture and taste of noodle with sucrose was undesirable for consuming. 4αGTase-treated rice flour appeared to have good potential as a non-sweet cryoprotectant of frozen product. Copyright © 2013 Elsevier B.V. All rights reserved.
Khouryieh, Hanna; Aramouni, Fadi
Flaxseed has many health benefits and is considered a functional food ingredient. Flaxseed flour (0-18%) was used to partially replace wheat flour in cookies and its effects on the physical and sensory characteristics of the cookies were investigated. A correlation analysis was conducted between the instrumental and sensory data. The cookie dough stickiness significantly (P < 0.05) decreased in relation to higher percentages of flaxseed flour. The 18% flaxseed cookies had the firmest texture, darkest color and lowest water activity. The 18% flaxseed cookies had the greatest spread ratio. However, this resulted in cookies of unacceptable quality properties. In consumer acceptance tests, cookies made with 6% and 12% flaxseed flour had the highest rating among all sensory attributes, while the 18% flaxseed cookies had the lowest sensory scores. The flavor attribute was most highly correlated with the overall acceptability (r = 0.90). Results indicated that flaxseed flour can be incorporated in cookies as a partial replacement up to 12% of wheat flour without negatively affecting the physical and sensory quality. The correlation results suggest that the flaxseed flavor attributes best predict consumer preference for overall acceptability, though texture and color attributes also contribute. Copyright © 2012 Society of Chemical Industry.
Zannini, Emanuele; Garofalo, Cristiana; Aquilanti, Lucia; Santarelli, Sara; Silvestri, Gloria; Clementi, Francesca
The aim of the present study was the microbiological and technological characterization of laboratory- made sourdoughs for use in barley-flour-based bread-making. A defined multi-strain starter culture consisting of selected lactic acid bacteria (LAB) and yeasts from wheat sourdoughs was inoculated into three flour-water mixtures, composed of: (i) 100% wheat flour (ii) 50% wheat flour and 50% hull-less barley flour (composite flour); (iii) 100% hull-less barley flour. After two months of continuous propagation, the chemical characteristics of the three sourdoughs were investigated by measuring: pH, total titratable acidity and concentrations of various microbial metabolites by HPLC (i.e. lactic, acetic, phenyllactic and butyric acids and diacetyl). The microbial traits were studied through viable counts, isolation and typing of LAB and yeasts and PCR-DGGE analyses. Only Saccharomyces cerevisiae and Lactobacillus plantarum were detectable in the sourdoughs together with other lactobacilli species which were different depending on the type of flour blend used. The molecular typing of the isolates highlighted that only a few strains among those initially inoculated prevailed. The volume increases of the three types of sourdough were also investigated and a correlation was seen between an increase in the barley flour content and a reduction in the dough volume.
The development, relative retention, and fecundity of the red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae), on six different types of starches, flour, and flour plus yeast was investigated in the laboratory. The viability of T. castaneum eggs was checked initially by placin...
Miglioranza, Lúcia H S; Breganó, José Wander; Dichi, Isaias; Matsuo, Tiemi; Dichi, Jane Bandeira; Barbosa, Décio Sabbatini
To find the ideal combination of Fe fortifier and its food vehicle is an essential measure in developing countries. However, its cost also plays an important role. In the present study, the effect on blood parameter values of corn flour-derived products fortified with powdered elemental Fe in the form of H2-reduced Fe was investigated in children and adolescents. One hundred and sixty-two individuals (eighty-six boys and seventy-six girls) from public educational centres in Londrina, Paraná (southern Brazil) participated in the study. Fe-deficiency anaemia (IDA) was defined when Hb and serum ferritin values fell below 12 g/dl and 20 microg/l, respectively; Fe deficiency (ID) was considered when serum ferritin was below 20 microg/l. The prevalence of ID and IDA decreased from 18.0 % and 14.9 %, values found at the beginning of the study, to respectively 5.6 % and 1.2 % after 6 months. Changes from altered to normal values occurred more often than normal to altered values with transferrin saturation (14.2 % v. 6.8 %; P < 0.04) and ferritin (12.4 % v. 0 %; P < 0.001). Hb, transferrin saturation and ferritin showed differences between normal and altered parameters after 6 months (P < 0.001). A pronounced reduction in the prevalence of ID and IDA was observed in children and adolescents following 6 months' ingestion of corn flour-derived products enriched with elemental Fe.
Ding, Zhigang; Gao, Hongmei; Du, Chuanlai; Zheng, Yimei; Guo, Yuanxin; Pan, Dongmei
To study the hypoglycemic effect of composite rice flour, the diabetic mouse model was established through the intraperitoneal injection of alloxan saline (twice, 200 mg/kg bw). The mice were randomly divided into 4 groups: negative control, positive control, metformin medication group, and composite rice flour feed group. After 21 days, the fasting blood glucose levels were determined by glucose oxidase method and followed with a glucose tolerance test. The results show that the body weight growth rate of mice in the rice flour group was significantly higher than that of the medication group (P < 0.01). Comparing with the positive control group, the fasting blood glucose levels of medication group and rice flour group were significantly lower, and the glucose tolerance was significantly increased in rice flour group (P < 0.01). In conclusion, the composite rice flour has obvious hypoglycemic and protective effect for diabetic mouse model.
Charles R. Frihart; James M. Wescott; Amy E. Traska
Higher petroleum prices and greater interest in bio-based adhesives have stimulated a considerable amount of research on incorporating soybean flour into wood adhesives in recent years. In some cases, soy was used at low levels as an extender for phenol-formaldehyde (PF) adhesives; in other cases, highly hydrolyzed soy flour was used. Although progress was made in...
Cannibalism is a very important factor regulating population dynamics of the red flour beetle. After several days of feeding, the flour becomes conditioned by the beetles, which can affect rates of cannibalism. Flour conditioning is caused by an accumulation of feces, pheromones, and ethylquinone, w...
Gujral, H Singh; Sharma, P; Bajaj, R; Solah, V
Brown rice after germinating for 24 and 48 h was milled into flour and incorporated in whole wheat flour at a level of 10% to prepare chapattis. The objective was to use chapatti as a delivery vehicle for germinated brown rice. The flour blends and chapattis made from the flour blends were evaluated for their antioxidant properties. Incorporating germinated brown rice flour increased the total phenolic content of the flour blend from 1897 to 2144 µg FAE/g. The total flavonoids content increased significantly from 632.3 to1770.9 µg CAE/g and metal chelating activity significantly increased by 71.62%. Antioxidant activity increased significantly by the addition of brown rice flour and addition of 24- and 48-h germinated brown rice flour further increased the antioxidant activity significantly. The total phenolic content and total flavonoids content decrease significantly in all the blends after baking the flour into chapatti. A decrease of 3% to 29% was observed in the total phenolic content and a decrease of 25% to 42% was observed in the total flavonoids content. However, baking of the flour blends into chapatti increased the reducing power, metal chelating activity by three folds and antioxidant activity from 64% to 104%.
Nakamura, Sumiko; Ohtsubo, Ken'ichi
The physicochemical properties of rice flour and wheat flour influenced the oil uptake of tempura frying batter. Rice flour was better than wheat flour in the overall quality and crispness of the fried tempura batter. Rice flour resisted oil absorption more than wheat flour, and a higher level of apparent starch amylose and higher consistency/breakdown ratio of the pasting properties led to a lower oil uptake of the batter. Super hard EM10 rice showed the highest apparent amylose content and higher consistency/breakdown ratio than the other flour samples, the batter from EM10 revealing the lowest oil content after frying among all the batters examined. The apparent amylose content, consistency/breakdown ratio and oil absorption index are proposed as useful guides for oil absorption when frying from among the physicochemical properties that influence the oil content of fried batter. Our proposal for the "oil absorption index" could be a simple, although not perfect method for estimating the oil content of batter flour.
Miftakhussolikhah; Ariani, D.; Angwar, M.; Kevin, J.
Coleus tuberosus is one of local commodities in Indonesia which contains high carbohydrate. However, its utilization does note maximally. Therefore, C. tuberosus made into flour by grater method, and then used for noodle making with arenga strach as substituting material. The aim of this study was to determine the effect of C. tuberosus flour substitution in noodle preparation from arenga starch on its textural and sensory properties. In this study, noodle was made in some variations which were 100% arenga starch; 75% arenga starch:25% C. tuberosus flour; 50% arenga starch:50% C. tuberosus flour; 25% arenga starch:75% C. tuberosus flour and 100% C. tuberosus flour. Characterization of noodle were investigated including water content, strength, tensile strength, strain at break and stickiness. Sensory evaluation was conducted to analyse consumers acceptance. Noodle was compared with two commercial products. The result showed that arenga starch substitution in C. tuberosus noodle affect textural properties of noodle. The higher concentration of C. tuberosus flour caused tensile strength and strain at break getting low. The water content and stickiness were increased as the C. tuberosus flour substitution ratio increase. None of the noodle resulted from C. tuberosus flour and arenga starch mixture was exactly as same as maize and rice commercial noodles. However 25% of C.tuberosus noodle has better characteristics than other C.tuberosus noodles.
Gluten-free pancakes were prepared using rice flour and rice flour replaced with various amounts, at 10, 20 and 40%, of sweet potato flour. Textural properties of the cooked pancakes, such as hardness and chewiness generally increased with time after cooking, whereas they decreased with increased sw...
Moiraghi, Malena; de la Hera, Esther; Pérez, Gabriela T; Gómez, Manuel
To select the flour parameters that relate strongly to cake-making performance, in this study the relationship between sponge cake quality, solvent retention capacity (SRC) profile and flour physicochemical characteristics was investigated using 38 soft wheat samples of different origins. Particle size average, protein, damaged starch, water-soluble pentosans, total pentosans, SRC and pasting properties were analysed. Sponge cake volume and crumb texture were measured to evaluate cake quality. Cluster analysis was applied to assess differences in flour quality parameters among wheat lines based on the SRC profile. Cluster 1 showed significantly higher sponge cake volume and crumb softness, finer particle size and lower SRC sucrose, SRC carbonate, SRC water, damaged starch and protein content. Particle size, damaged starch, protein, thickening capacity and SRC parameters correlated negatively with sponge cake volume, while total pentosans and pasting temperature showed the opposite effect. The negative correlations between cake volume and SRC parameters along with the cluster analysis results indicated that flours with smaller particle size, lower absorption capacity and higher pasting temperature had better cake-making performance. Some simple analyses, such as SRC, particle size distribution and pasting properties, may help to choose flours suitable for cake making. Copyright © 2012 Society of Chemical Industry.
Kaprelyants, Leonid; Fedosov, Sergey; Zhygunov, Dmytro
Bran, being a by-product of grain grinding, is characterised by a high biological value and is thus widely used in food production. In this study, different streams of bran and shorts from the wheat graded milling process were incorporated into wheat flour at levels of 5, 11, 17 and 23% (w/w) to investigate their influence on the nutritional and baking properties of flour. Bran and shorts streams improved the baking properties of flour blends. The best result in the case of graded flour blends with different bran products was obtained at the 95:5 ratio. The products containing peripheral parts of grain had higher proteolytic enzyme and superoxide dismutase activities and lower trypsin inhibitor content and β-amylase activity compared with graded flour. Streams of wheat milled fractions including peripheral parts of grain increase the content of bioactive substances and dietary fibre in blends with wheat graded flour. © 2013 Society of Chemical Industry.
Ying, DanYang; Hlaing, Mya Myintzu; Lerisson, Julie; Pitts, Keith; Cheng, Lijiang; Sanguansri, Luz; Augustin, Mary Ann
Olive pomace, a waste stream from olive oil processing, was fractionated by centrifugation to obtain a supernatant and a flesh-enriched fraction, and freeze dried to obtain a powder. The dried supernatant contained 5.8% moisture, 4.8% protein, 3.5% fat, 3.5% ash, 82.4% carbohydrate (including 17.2% dietary fiber) and polyphenols (2970mg gallic acid equivalents (GAE)/100g). The dried flesh-enriched fraction, contained 5.9% moisture, 13.4% protein, 14.2% fat, 3.5% ash, 63.1% carbohydrate (including 42.7% dietary fiber) and polyphenols (1960mg GAE/100g). The extruded products using rice-oat flour or maize-oat flour mixtures as the base were formulated to contain 5% or 10% olive pomace fractions (dry basis). The extruded products with added olive pomace fractions has higher fiber (2-7g/100g) and polyphenol contents (67-161mg GAE/100g) compared to the corresponding mixtures of rice-oat flour base (0.92g/100g fiber, 20mg GAE/100g) or maize-oat flour base (3.2g/100g fiber, 20mg GAE/100g) without olive pomace fractions. Addition of olive pomace fractions reduced the die pressure and specific mechanical energy during extrusion and resulted in lower radial expansion in the extruded product. The impact of the addition of olive pomace fraction on physical characteristics of the extruded product is higher for rice-oat flour base than maize-oat flour base. The underlining mechanism was explained by FTIR analysis. FTIR showed that there were significant changes in the carbohydrate components and the structure of the proteins on extrusion, with consequent effects on the expansion and density of the extruded product. This study showed the feasibility of preparing fiber and polyphenol enriched extruded products by incorporation of olive pomace. This shows the potential of recovery and diversion of edible components from waste streams of olive oil processing for formulation of extruded products. Copyright © 2017 Elsevier Ltd. All rights reserved.
Whole navy bean flour and its fine and coarse particle size fractions were used to completely replace wheat flour in cakes. Replacement of wheat flour with whole bean flour significantly increased the protein content. The protein content was adjusted to three levels with navy bean starch. The effect...
Linda Lorenz; Michael Birkeland; Chera Daurio; Charles R. Frihart
Except for the substitution of soy flour in phenolic resins (Frihart et al. 2013) and the use of soy flour at high pHs (Lambuth 2003), the literature on soy protein properties for adhesives has mainly focused on soy protein isolate and specific protein fractions (Sun 2005b). The assumption is that proteins are the main portion of soy flour giving bond strength and the...
The objective of this study was to determine the effect of seed moisture content (10 to 16%) and rotor speed (6,000 to 15,000 rpm) of a centrifugal mill on quality of whole wheat flour (WWF) and subsequent baking quality. Particle size distribution, flour temperature, flour moisture, and starch dam...
The effect of incorporating uniquely processed whole-seed cowpeas or plantain flours at 10 or 20 g/100 g in all-purpose flour on paste viscosity and bread-baking properties in model bread was determined. Flours from plantains processed as follows: unblanched plantains dried at 60 degrees C (PLC), so...
Saleh, Mohammed; Lee, Youngseung; Obeidat, Hayat
The effects of substituting wheat flour using fractions of blanched or nonblanched sweet potato flour on produced pasta functional characteristics were investigated. The use of sweet potato flour to replace fractions of wheat flour, regardless of blanching treatment, resulted in significant (p < .05) increase in water holding capacity (WHC), cooked pasta water uptake and solid leaching out and freeze-thaw stability of produced pasta. For instance, treatment containing 40% of nonblanched sweet potato flour and held at 55C resulted in 27% point increase in WHC compared to the control. Sweet potato flour was also contributed to the decrease in treatments pasting viscosities and in cooked pasta hardness. Cooked pasta hardness was significantly (p < .05) decreased from 255.6 N to 187.5, and 152.6 N when using 15% blanched and 40% nonblanched sweet potato flour replacements, respectively. Flow behavior index of wheat flour treatments containing fractions of sweet potato flour were fitted in a shear thinning model. Quality indices of pasta made using fractions of sweet potato were equivalent to or sometimes superior to that of the control sample. Results indicated the possible enhancement of pasta nutritional quality including firmness, cooking loss, and water uptake without impairing consumer acceptability. The use of sweet potato flour in pasta would enhance the nutritional and physicochemical properties of developed pasta and pasta products. Furthermore, since sweet potato is not cultivated most of the year; sweet potato flour pasta would be better utilized in food processing and is expected to enhance sweet potato consumption year around. © 2017 Wiley Periodicals, Inc.
Jongsutjarittam, Ornpicha; Charoenrein, Sanguansri
The properties of waxy rice flour (WRF) and non-waxy rice flour (RF) were modified using an extrusion process with different feeding material moisture contents. WRF was more affected by the thermomechanical stress from extrusion; consequently, it had a lower glass transition temperature but higher water solubility index (WSI) indicating higher molecular degradation than extruded RF. The lower moisture content of the feeding flour caused more severe flour damage (coarser surface of the extruded flour) and lowered relative crystallinity compared to higher moisture content processing. Moreover, low moisture content processing led to complete gelatinization, whereas, partial gelatinization occurred in the higher moisture content extrusion. Consequently, the extruded flours had a lower peak viscosity and gelatinization enthalpy but a higher water absorption index and WSI than native flour. In conclusion, the rice flour type and the moisture content of the extrusion feeding flour affected the physicochemical properties of the extruded flour. Copyright © 2014 Elsevier Ltd. All rights reserved.
Finocchiaro, Franca; Ferrari, Barbara; Gianinetti, Alberto; Scazzina, Francesca; Pellegrini, Nicoletta; Caramanico, Rosita; Salati, Claudia; Shirvanian, Vigen; Stanca, Antonio Michele
The aim of this research was to evaluate β-glucan-enriched flours, obtained from barleys with either normal or waxy starch, for their effects on the glycaemic index (GI) and the quality of bread. Rheological results confirmed that when barley flour was included in the dough the overall quality of bread slightly worsened. However, positive consequences on glycaemia were obtained with the normal starch barley: the GI of all-wheat bread (82.8 ± 7.2) was significantly reduced (57.2 ± 7.9) when 40% of wheat flour was substituted with β-glucan-enriched barley flour (6.0% ± 0.1 β-glucan in the final flour blend). In contrast, this positive effect was significantly reduced (GI: 70.1 ± 9.1) when 40% of wheat flour was substituted with the β-glucan-enriched flour of a waxy barley (CDC Alamo; 6.6 ± 0.2 β-glucan in the final flour blend), suggesting that the ability of β-glucans to lower the GI was affected by the barley starch-type.
Doporto, María C; Mugridge, Alicia; García, María A; Viña, Sonia Z
Ahipa roots' chemical composition and physiological parameters were characterised; ahipa flour preparation procedures were selected and the chemical composition and functional properties of these products were studied. Ahipa roots and flour can be considered alternative food sources of gluten-free starch, with a considerable contribution of protein, fibre and minerals, such as potassium, calcium and iron. The grating process for ahipa flour production required a pressing step (AFGP) and the recovery of the starch leached. The slicing procedure (AFS) was simpler and the resulting product showed higher contents of potassium, magnesium, calcium and protein than did AFGP, which showed lower sodium and higher acid detergent fibre contents, together with lower gelatinisation temperature. Both flours differed in terms of α-amylase activity and swelling power, characteristics that may condition their specific applications, such as the incorporation of these flours as gluten-free functional food ingredients. Copyright © 2010 Elsevier Ltd. All rights reserved.
Guttieri, Mary J; Souza, Edward J; Sneller, Clay
Nonstarch polysaccharides in wheat flour have significant capacity to affect the processing quality of wheat flour dough and the finished quality of wheat flour products. Most research has focused on the effects of arabinoxylans (AX) in bread making. This study found that water-extractable AX and arabinogalactan peptides can predict variation in pastry wheat quality as captured by the wire-cut cookie model system. The sum of water-extractable AX plus arabinogalactan was highly predictive of cookie spread factor. The combination of cookie spread factor and the ratio of water-extractable arabinose to xylose predicted peak force of the three-point bend test of cookie texture.
Kojima, Yoichi; Isa, Akiko; Kobori, Hikaru; Suzuki, Shigehiko; Ito, Hirokazu; Makise, Rie; Okamoto, Masaki
Wood-based materials are used extensively in residual construction worldwide. Most of the adhesives used in wood-based materials are derived from fossil resources, and some are not environmentally friendly. This study explores nanofiber technology as an alternative to such adhesives. Previous studies have shown that the three-dimensional binding effects of cellulose nanofiber (CNF), when mixed with wood flour, can significantly improve the physical and mechanical properties of wood flour board. In this study, ligno-cellulose nanofibers (LCNF) were fabricated by wet disk milling of wood flour. Composite boards of wood flour and LCNF were produced to investigate the binding effect(s) of LCNF. The fabrication of LCNF by disk milling was simple and effective, and its incorporation into wood flour board significantly enhanced the physical and mechanical properties of the board. PMID:28788217
Hasjim, Jovin; Li, Enpeng; Dhital, Sushil
Starch gelatinization and flour pasting properties were determined and correlated with four different levels of starch structures in rice flour, i.e. flour particle size, degree of damaged starch granules, whole molecular size, and molecular branching structure. Onset starch-gelatinization temperatures were not significantly different among all flour samples, but peak and conclusion starch-gelatinization temperatures were significantly different and were strongly correlated with the flour particle size, indicating that rice flour with larger particle size has a greater barrier for heat transfer. There were slight differences in the enthalpy of starch gelatinization, which are likely associated with the disruption of crystalline structure in starch granules by the milling processes. Flours with volume-median diameter ≥56 μm did not show a defined peak viscosity in the RVA viscogram, possibly due to the presence of native protein and/or cell-wall structure stabilizing the swollen starch granules against the rupture caused by shear during heating. Furthermore, RVA final viscosity of flour was strongly correlated with the degree of damage to starch granules, suggesting the contribution of granular structure, possibly in swollen form. The results from this study allow the improvement in the manufacture and the selection criteria of rice flour with desirable gelatinization and pasting properties. Copyright © 2012 Elsevier Ltd. All rights reserved.
Narukawa, Tomohiro; Chiba, Koichi
A versatile heat-assisted pretreatment aqueous extraction method for the analysis of arsenic species in rice was developed. Rice flour certified reference materials NIST SRM1568a and NMIJ CRM 7503-a and a flour made from polished rice were used as samples, and HPLC-ICP-MS was employed for the determination of arsenic species. Arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA) were detected in NIST SRM, and As(III), As(V) and DMAA were found in NMIJ CRM and the prepared polished rice flour. The sums of the concentrations of all species in each rice flour sample were 97-102% of the total arsenic concentration in each sample.
Chakraborty, Subir K; Gupta, Saumya; Kotwaliwale, Nachiket
The effects of formulation of leavened bread by using varying levels (for 50 g base flour) of soy flour-barnyard millet blends (with 5.74, 6.25, 7, 7.75 and 8.26 g of soy flour), yeast (1.83, 2, 2.25, 2.5 and 2.67 g) and salt (0.63, 0.8, 1.05, 1.30 and 1.47 g) on textural, colour and specific volume were determined. A central composite rotatable design of response surface methodology was used to plan the experiments. The second order models obtained were observed to be statistically significant and capable of demonstrating the effects input variables on responses. All the textural properties were affected significantly by amount of soy flour and yeast in the dough. Soy flour had a significant effect on the colour of the bread making it more brown. Interaction of soy flour and yeast affected the specific volume to maximum extent. Two-tailed t test established that the efficacy of the models as no significant was observed between the predicted and the actual values.
Erukainure, Ochuko L; Okafor, Jane N C; Ogunji, Akinyele; Ukazu, Happiness; Okafor, Ebele N; Eboagwu, Ijeoma L
The rheological behavior and functional properties of doughs from bambara-wheat composite flour was investigated. Bambara-wheat composite flour was prepared by substituting wheat with 0%, 10%, 15%, and 20% of bambara flour. The rheological behavior of their dough was analyzed with Mixolab. Breads produced from the flour were analyzed for physical characteristics. Organoleptic analysis was carried out by 20 panelists. Mixolab analysis revealed, except for stability time, depreciating values for dough consistency (C1), protein weakening (C2), starch gelatinization (C3), amylase activity (C4), and retrogradation (C5) as the inclusion of bambara flour increased. Physical characteristics of the loaves revealed significant ( P < 0.05) decreasing bread volume and increasing specific volume, respectively, as bambara inclusion increased. There was significant ( P < 0.05) difference between wheat bread and the bambara-wheat composites in all the studied quality attributes. 15% bambara-wheat composite bread was the most accepted amongst the composite breads. Inclusion of bambara flour improved the protein behavior of the composite, but did not evidently show benefits in the baking characteristics.
Ijah, Udeme Joshua Josiah; Aduloju, Mercy Oluwayemisi; Aransiola, Sesan Abiodun
Dehydrated uncooked potato (Irish and sweet) flour was blended by weight with commercial wheat flour at 0 to 10% levels of substitution to make bread. Comparative study of the microbial and nutritional qualities of the bread was undertaken. The total aerobic bacterial counts ranged from 3.0 × 105 cfu/g to 1.09 × 106 cfu/g while the fungal counts ranged from 8.0 × 101 cfu/g to 1.20 × 103 cfu/g of the sample. Coliforms were not detected in the bread. Bacteria isolated were species of Bacillus, Staphylococcus, and Micrococcus while fungi isolates were species of Aspergillus, Penicillium, Rhizopus, and Mucor. The mean sensory scores (color, aroma, taste, texture, and general acceptability) were evaluated. The color of the bread baked from WF/IPF2 (wheat/Irish potato flour, 95 : 5%) blend was preferred to WF (wheat flour, 100%) while WF/SPF1 (wheat/sweet potato flour, 100%) and WF/IPF1 (wheat/Irish potato flour, 90 : 10%) aroma were preferred to WF. However, the bread baked from WF, WF/IPF2 (wheat flour/Irish potato flour, 95 : 5%), and WF/SPF2 (wheat/sweet potato flour, 95 : 5%) was more acceptable than other blends. The use of hydrated potato flour in bread making is advantageous due to increased nutritional value, higher bread yield, and reduced rate of staling. PMID:26904642
Cody, T L; Olabi, A; Pettingell, A G; Tong, P S; Walker, J H
The effects of varying concentrations (2, 4, and 6%) of 2 types of rice flours (RF 1 and RF 2) on the physicochemical properties and sensory characteristics of vanilla ice cream samples were assessed at different fat levels (0, 4, and 10%) and storage conditions (control vs. heat-shocked). Fat and total solids were measured as well as hardness, viscosity, and melting rate. Eight trained panelists conducted descriptive sensory analyses of the samples at 0 and 7 wk. The 2% rice flour level and to a certain extent the 4% usage level generally improved texture while affecting to a lesser extent the flavor characteristics of the samples compared with the control. The RF 2 generally had a more significant effect than RF 1, especially on the texture attributes. Although the rice flour reduced the negative impact of temperature abuse on textural properties, the samples still deteriorated in textural properties (more icy) under temperature abuse conditions. In addition, rice starch does lower perceived sweetness and can have a "flour flavor" at high usage levels. The use of rice flour appears to be most advantageous for low fat ice cream samples.
Johnson, J A; Valero, K A; Wang, S; Tang, J
While developing radio frequency heat treatments for dried fruits and nuts, we used a heating block system developed by Washington State University to identify the most heat-tolerant life stage of red flour beetle, Tribolium castaneum (Herbst), and to determine its thermal death kinetics. Using a heating rate of 15 degrees C/min to approximate the rapid heating of radio frequency treatments, the relative heat tolerance of red flour beetle stages was found to be older larvae > pupae and adults > eggs and younger larvae. Lethal exposure times for temperatures of 48, 50, and 52 degrees C for the most heat-tolerant larval stage were estimated using a 0.5th order kinetic model. Exposures needed for 95% mortality at 48 degrees C were too long to be practical (67 min), but increasing treatment temperatures to 50 and 52 degrees C resulted in more useful exposure times of 8 and 1.3 min, respectively. Red flour beetle was more sensitive to changes in treatment temperature than previously studied moth species, resulting in red flour beetle being the most heat-tolerant species at 48 degrees C, but navel orangeworm, Amyelois transitella (Walker), being most heat tolerant at 50 and 52 degrees C. Consequently, efficacious treatments for navel orangeworm at 50-52 degrees C also would control red flour beetle.
Rebecca E. Ibach; Craig M. Clemons
The role of moisture in the biological decay of wood-plastic composites was investigated. Southern pine wood fiber and ponderosa pine wood flour were chemically modified using either acetic anhydride (AA), butylene oxide (BO), or propylene oxide (PO). A 50:50 mixture of high density polyethylene and either chemically modified fiber or flour, or untreated fiber or flour...
Monteiro, Maria Lúcia G; Mársico, Eliane T; Soares, Manoel S; Magalhães, Amanda O; Canto, Anna Carolina V C S; Costa-Lima, Bruno R C; Alvares, Thiago S; Conte, Carlos A
Physicochemical parameters of pasta enriched with tilapia (Oreochromis niloticus) flour were investigated. Five formulations were prepared with different concentrations of tilapia flour as partial substitute of wheat flour: pasta without tilapia flour (PTF0%), pasta with 6% (PTF6%), 12% (PTF12%), 17% (PTF17%), and 23% (PTF23%) of tilapia flour. The formulations were assessed for proximate composition, fatty acid and amino acid profile on day 1 whereas, instrumental color parameters (L*, a* and b* values), pH, water activity (aw), and lipid and protein oxidation were evaluated on days 1, 7, 14, and 21 of storage at 25°C. Fortification with tilapia flour increased (p < 0.05) protein, lipid, ash, total essential amino acids, and total polyunsaturated fatty acids contents. In addition, supplementation of pasta with tilapia flour decreased (p < 0.05) lightness and water activity while redness, yellowness, pH values, and lipid oxidation were increased (p < 0.05) in a level-dependent manner. Nevertheless, all formulations were exhibited storage stability at 25°C. In general, protein oxidation was greater (p < 0.05) in the pasta containing 12%, 17%, and 23% of tilapia flour than their counterparts, and the storage promoted an increase (p < 0.05) on the carbonyl content in all formulations. Thus, pasta with 6% of tilapia flour has the potential to be a technological alternative to food industry for the nutritional enrichment of traditional pasta with negligible negative effects on the chemical stability of the final product during 21 days at 25°C.
Monteiro, Maria Lúcia G.; Mársico, Eliane T.; Soares, Manoel S.; Magalhães, Amanda O.; Canto, Anna Carolina V. C. S.; Costa-Lima, Bruno R. C.; Alvares, Thiago S.; Conte, Carlos A.
Physicochemical parameters of pasta enriched with tilapia (Oreochromis niloticus) flour were investigated. Five formulations were prepared with different concentrations of tilapia flour as partial substitute of wheat flour: pasta without tilapia flour (PTF0%), pasta with 6% (PTF6%), 12% (PTF12%), 17% (PTF17%), and 23% (PTF23%) of tilapia flour. The formulations were assessed for proximate composition, fatty acid and amino acid profile on day 1 whereas, instrumental color parameters (L*, a* and b* values), pH, water activity (aw), and lipid and protein oxidation were evaluated on days 1, 7, 14, and 21 of storage at 25°C. Fortification with tilapia flour increased (p < 0.05) protein, lipid, ash, total essential amino acids, and total polyunsaturated fatty acids contents. In addition, supplementation of pasta with tilapia flour decreased (p < 0.05) lightness and water activity while redness, yellowness, pH values, and lipid oxidation were increased (p < 0.05) in a level-dependent manner. Nevertheless, all formulations were exhibited storage stability at 25°C. In general, protein oxidation was greater (p < 0.05) in the pasta containing 12%, 17%, and 23% of tilapia flour than their counterparts, and the storage promoted an increase (p < 0.05) on the carbonyl content in all formulations. Thus, pasta with 6% of tilapia flour has the potential to be a technological alternative to food industry for the nutritional enrichment of traditional pasta with negligible negative effects on the chemical stability of the final product during 21 days at 25°C. PMID:27973565
Pramono, A.; Primadhani, M. S.; Swastike, W.; Sutrisno, J.
The aim of this research is to determine the nutrient digestibility of vegetables waste flour on of male quail. Four hundred male quails were divided into four groups with five replications. The experiment is Completely Randomized Design and the data were analyzed by analyses of variants. The experimental diets were P0 = basal diet, P1 = 97% basal diet + 3% vegetables waste flour, P2 = 94% basal diet + 6% vegetables waste flour, and P3 = 91% basal diet + 9% vegetables waste flour. The observed variables were the digestibility of dry matter, crude protein and extract ether. Result showed that of the addition of vegetable waste flour in the diet had no effect on crude protein digestibility (P>0.05), however shown significant effect on dry matter (P <0.01) and extract ether (P <0.01) digestibility.
The possibility of using NIR spectroscopy technology to detect kojic acid (KA) added in wheat flour was studied. Three common types of white flour samples, i.e. high-gluten flour, plain flour and low-gluten flour were added with different contents of KA (0.0%, 0.5%, 1.0%, 3.0%, 5.0%, and 10.0%) resp...
Yu, Lilei; Nanguet, Anne-Laure; Beta, Trust
Antioxidant properties of refined and whole wheat flour and their resultant bread were investigated to document the effects of baking. Total phenolic content (TPC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and oxygen radical absorbance capacity (ORAC) were employed to determine the content of ethanol extractable phenolic compounds. HPLC was used to detect the presence of phenolic acids prior to their confirmation using LC-MS/MS. Whole wheat flour showed significantly higher antioxidant activity than refined flour (p < 0.05). There was a significant effect of the bread-making process with the TPC of whole wheat bread (1.50–1.65 mg/g) and white bread (0.79–1.03 mg/g) showing a respective reduction of 28% and 33% of the levels found in whole wheat and refined flour. Similarly, baking decreased DPPH radical scavenging capacity by 32% and 30%. ORAC values, however, indicated that baking increased the antioxidant activities of whole wheat and refined flour by 1.8 and 2.9 times, respectively. HPLC analysis showed an increase of 18% to 35% in ferulic acid after baking to obtain whole and refined wheat bread containing 330.1 and 25.3 µg/g (average), respectively. Whole wheat flour and bread were superior to refined flour and bread in in vitro antioxidant properties. PMID:26784470
Esuoso, K O; Bamiro, F O
The possibility of producing bread from wheat (WF)/Breadfruit (BF), composite flour has been examined. Wheat flour was supplemented with up to 50% breadfruit flour. Chemical analysis of the breadfruit flour indicated a high starch content (80.9 +/- 0.9%), a fairly high crude fibre and ash contents (1.6 +/- 0.3; 4.2 +/- 0.3%) respectively and a low protein content (4.0 +/- 0.5%). Brabender amylograph pasting viscosity of the various flour and flour blends indicated that apart from the 100% WF, 10% BF/WF blends recorded the best pasting characteristics in terms of the starch stability, gelatinization index and set back values. While the 100% BF exhibited the poorest pasting characteristics. Physical characteristics indicated that only 100% WF and 10% BF/WF were free of cracks and crumbliness, 20% and 30% BF/WF had slight cracks, while others are dense and highly cracked. This was reflected on the panellist judgment during sensory evaluation. There was no significant difference at P < 0.05 between the control (100% WF) and the composite bread samples up to 30% level of breadfruit flour. Others differed significantly.
Anton, Alex A; Ross, Kelly A; Lukow, Odean M; Fulcher, R Gary; Arntfield, Susan D
Composite flours containing 15%, 25%, or 35% of small red, black, pinto, or navy bean flours (BF) and wheat were made into tortillas. Dough rheology, firmness, cohesiveness, rollability, and some physical properties of tortillas were negatively affected as BF concentration increased regardless of bean cultivar. Nutritionally, all bean tortillas had significantly higher levels of crude protein, total phenols, 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS(+)) in vitro antioxidant activity (AA) and antinutritional compounds such as phytic acid (PA) and trypsin inhibitors (TI) than the wheat control. Tortillas to which 35% of small red, pinto and black BF was added had the highest levels of phenols, which were significantly correlated with both DPPH (r=0.99) and ABTS(+) (r=0.99) AA. Compared to raw flours, PA and TI were reduced from 37.37% to 43.78% and from 50% to 66%, respectively, in the tortillas. Overall analysis indicated that tortillas with acceptable texture and improved nutritional profile were produced at 25% substitution. Copyright © 2007 Elsevier Ltd. All rights reserved.
Serdaroğlu, Meltem; Yıldız-Turp, Gülen; Abrodímov, Kiyalbek
Meatballs were extended with blackeye bean flour (BBF), chickpea flour (CF), lentil flour (LF) and rusk (R) at level of 10%. Raw and cooked meatballs were analyzed for moisture, fat, protein and ash content. Cooking properties and colour parameters were evaluated. BBF and LF resulted in greater cooking yield, fat retention and moisture retention values. Meatballs extended with LF were lighter than other samples. Meatballs formulated with BBF had the lowest reduction in diameter. Meatballs with BBF and CF had higher water holding capacity (WHC) than other treatment groups. All meatballs incorporating legume flours were tougher (lower penetration values) than the R treatment. According to sensory evaluation results all meatball treatments had high acceptability and received high scores (6.8 and above). Meatballs with BBF and CF had lower TBA values than meatballs with LF and R at 3rd month of frozen storage at -18°C.
Mizubuti, I Y; Biondo Júnior, O; Souza, L W; da Silva, R S; Ida, E I
The objective of this investigation was to study the functional properties of Pigeon pea (Cajanus cajan (L.) Millsp) flour and protein concentrate. The solubility of both samples were superior than 70% at pH above 6.7 and below 3.5. The water and oil absorption were 1.2 and 1.07 ml/g of sample and 0.87 and 1.73 ml/g of flour and protein concentrate samples, respectively. The minimum concentration of flour and protein concentrate needed for gelation was 20% and 12%, respectively. The emulsifying capacity of flour and concentrate was 129.35 g and 191.66 g oil/g of protein and the emulsion stability 87.50 and 97.97%, respectively, after 780 minutes. The foam capacity and stability of flour foam were 36.0% and 18.61, while of the concentrate were 44.70% and 78.97% after 90 minutes. These properties indicate that the flour as well as the concentrate could have application in various food systems.
Cattaneo, F; Costamagna, M S; Zampini, I C; Sayago, J; Alberto, M R; Chamorro, V; Pazos, A; Thomas-Valdés, S; Schmeda-Hirschmann, G; Isla, M I
The Prosopis alba seed is a waste material in the process to produce pod flour. To suggest a potential use of these seeds it is necessary to determine the nutritional, phytochemical and functional quality of cotyledon flour from Prosopis alba. This flour showed high level of proteins (62%), low content of total carbohydrate and fat. Free polyphenol (1150±20mg GAE/100g flour) and carotenoids (10.55±0.05mg β-CE/100g flour) compounds were the dominant compounds. The main identified constituents in the polyphenolic extracts were C- glycosyl flavones, including schaftoside, isoschaftoside, vicenin II, vitexin and isovitexin. The extract enriched in polyphenolic compounds exhibited ABTS(+) reducing capacity and scavenging activity of H2O2; and was able to inhibit phospholipase, lipoxygenase and cyclooxygenase, three pro-inflammatory enzymes. According to our results, the P. alba cotyledon flour could be considered as a new alternative in the formulation of functional foods or food supplements. Copyright © 2016 Elsevier Ltd. All rights reserved.
Ogunsina, B S; Radha, C; Indrani, D
The effects of replacing wheat flour with 0-15% debittered moringa seed (DBMS) flour on the dough rheology of wheat flour and physical, sensory and chemical properties of bread were studied. Incorporation of an increasing amount of DBMS from 0 to 15% decreased farinograph water absorption, dough stability, amylograph peak viscosity and overall quality of bread. The bread with 10% DBMS had a typical moringa seed taste and was acceptable. Addition of combination of additives improved the dough strength and quality of bread with 10% DBMS flour. Replacement of wheat flour with 10%, 20% and 30% DBMS grits was found to affect cookies quality. Cookies with 20% DBMS grits had the nutty taste of moringa seeds and were acceptable. Bread with 10% DBMS flour and cookies with 20% DBMS grits had more protein, iron and calcium. Incorporating moringa seeds in baked foods may be exploited as a means of boosting nutrition in Africa and Asia where malnutrition is prevalent.
Barak, Sheweta; Mudgil, Deepak; Khatkar, B S
Two wheat varieties 'C 306' and 'WH 542' were milled to obtain flour fractions of different particle sizes. Various physicochemical parameters such as wet and dry gluten, falling number, solvent retention capacity (SRC), alkaline water retention capacity (AWRC) and damaged starch content of the flour fractions were analyzed. The damaged starch values ranged from 5.14% to 14.79% for different flour fractions and increased significantly with decrease in particle size. AWRC and SRC of the flour fractions also increased with decrease in particle size. AWRC(r = 0.659) showed positive correlation and cookie spread ratio (r = -0.826) was strongly negatively correlated with the damaged starch levels. Hardness of the cookies in term of compression force showed increasing trend as damaged starch of the flour fractions increased. Spread ratio of the cookies ranged from 6.72 to 10.12. Wheat flour of particle size greater than 150 μm produced cookies with best quality.
Nkundabombi, Marie Grace; Nakimbugwe, Dorothy; Muyonga, John H
Common beans (Phaseolus vulgaris L.) are rich nutritious and affordable by vulnerable groups, thus a good choice for biofortification to address malnutrition. However, increasing micronutrients content of beans, without improving micronutrients bioavailability will not improve the micronutrients status of consumers. Effect of different processing methods on the physicochemical characteristics of biofortified bean flour was determined. Processing methods used in this study were malting (48 h), roasting (170°C/45 min), and extrusion cooking using a twin screw extruder with three heating sections, the first set at 60°C, the second at 130°C, and the last one at 150°C. The screw was set at a speed of 35 Hz (123g) and bean flour moisture content was 15%. Mineral extractability, in vitro protein digestibility, pasting properties, and sensory acceptability of porridge and sauce from processed flour were determined. All processing methods significantly increased (P < 0.05) mineral extractability, iron from 38.9% to 79.5% for K131 and from 40.7% to 83.4% for ROBA1, in vitro protein digestibility from 58.2% to 82% for ROBA1 and from 56.2% to 79% for K131. Pasting viscosities of both bean varieties reduced with processing. There was no significant difference (P < 0.05) between sensory acceptability of porridge or sauce from extruded biofortified bean flour and malted/roasted biofortified bean flour. Acceptability was also not affected by the bean variety used. Mineral bioavailability and in vitro protein digestibility increased more for extruded flour than for malted/roasted flours. Sauce and porridge prepared from processed biofortified bean flour had lower viscosity (extruded flour had the lowest viscosity), thus higher nutrient and energy density than those prepared from unprocessed biofortified bean flour. Estimated nutritional contribution of sauce and porridge made from processed ROBA1 flour to daily requirement of children below 5 years and women of
van Kampen, V; Rabstein, S; Sander, I; Merget, R; Brüning, T; Broding, H C; Keller, C; Müsken, H; Overlack, A; Schultze-Werninghaus, G; Walusiak, J; Raulf-Heimsoth, M
Wheat and rye flours are among the most important allergens causing occupational asthma. Usually, the diagnosis of baker's asthma is based on inhalation challenge tests with flours. To evaluate the relevance of flour-specific serum immunoglobulin E (IgE) and skin prick test (SPT) in the diagnosis of baker's asthma and to define flour-specific IgE concentrations and wheal sizes that allow a prediction of the outcome of challenge testing. Bronchial and nasal challenge tests with wheat (rye) flour were performed in 71 (95) symptomatic bakers. Determinations of flour-specific IgE as well as SPTs were performed in all subjects. Analyses included the calculation of sensitivity, specificity, positive (PPV) and negative predictive values (NPV) at different IgE concentrations and different wheal sizes, and receiver-operating characteristics (ROC) plots with the challenge result as gold standard. Thirty-seven bakers were positive in the challenge with wheat flour, while 63 were positive with rye flour. Depending on the flour-specific IgE concentrations (wheal size), PPV was 74-100% (74-100%) for wheat and 82-100% (91-100%) for rye flour, respectively. The minimal cut-off values with a PPV of 100% were 2.32 kU/l (5.0 mm) for wheat flour and 9.64 kU/l (4.5 mm) for rye flour. The shapes of the ROC plots were similar for wheat and rye flour. High concentrations of flour-specific IgE and clear SPT results in symptomatic bakers are good predictors for a positive challenge test. Challenge tests with flours may be avoided in strongly sensitized bakers.
Kim, Eun-Kyung; Scott, Peter M; Lau, Ben P-Y; Lewis, David A
To extract fumonisin B1 (FB1) and fumonisin B2 (FB2) from Thai white rice flour, different solvent mixtures, temperatures, pH values, and addition of enzymes or ethylenediaminetetraacetic acid disodium salt (Na2EDTA) were examined. Three extractions with 0.1 M Na2EDTA achieved the highest recoveries. Initial recoveries of fumonisins added to white rice flour, cornstarch, cornmeal, and glucose varied with commodity. Fumonisins disappeared in Thai white rice flour after 12 h, but 55% remained in another white rice flour. With cornstarch 20-30% fumonisins remained after 24 h; only 43% of 14C-labeled FB1 materials extracted from cornstarch was eluted with methanol from an immunoaffinity column. Fumonisins were stable in cornmeal for 24 h but only approximately 50% remained after 30 days. With glucose, 25% of FB1 and FB2 remained 24 h after addition; N-(1-deoxy-D-fructos-1-yl)FB(1) andN-(carboxymethyl)FB(1) were detected in lower amounts than residual FB(1) after 3 months.
Marraccini, Paolo; Brass, David M.; Hollingsworth, John W.; Maruoka, Shuichiro; Garantziotis, Stavros; Schwartz, David A.
Background Baker’s asthma is one of the most commonly reported occupational lung diseases in countries where fresh bread is baked daily in large quantities, and is characterized by rhinitis, bronchial hyperresponsiveness, and reversible airflow obstruction. Epidemiological studies have identified pre-existing atopy as an important risk factor for developing baker’s asthma, yet the etiology and pathogenesis of baker’s asthma remain poorly understood. Objective We sought to develop a mouse model of baker’s asthma that could be used to characterize the development and progression of baker’s asthma. Methods We were unable to sensitize mice to bakery flour dust or flour dust extract. We assessed total inflammatory cells, cellular differential, total serum IgE and the pro-inflammatory cytokine response to oropharyngeally instilled bakery flour dust or flour dust extract by itself or in the context of OVA sensitization and challenge. Results Both bakery flour dust and flour dust extract consistently elicited a neutrophilic inflammation in a tlr4-independent manner; suggesting that endotoxin is not playing a role in the inflammatory response to flour dust. Moreover, bakery flour dust and dust extract significantly enhance the inflammatory response in OVA sensitized and challenged mice. Conclusions Bakery flour dust and flour dust extract are strongly pro-inflammatory and can cause non-allergic airway inflammation and can enhance allergen-mediated airway inflammation. PMID:18564331
The Rapid Visco Analyzer (RVA) was investigated as a tool to measure oxidative gelation capacity (OGC) of aqueous wheat-flour suspensions. One, club-wheat patent flour was used to determine optimal hydration time and 33 straight-grade flours (representing 12 hard and 31 soft varieties) were used to ...
The linear and non-linear rheological properties of the suspensions for the hard red spring wheat (HRS) flour, soft wheat (Pastry) flour, barley flour, as well as the remain residues of HRS flour, Pastry flour, and barley flour after fermentation were investigated. The linear and non-linear rheologi...
The date palm (Phoenix dactylifera L) is one of the oldest fruit plants that identical with people’s lives in the Middle East including The Kingdom of Saudi Arabia since ancient times.The date palm is known and consumed by most of people in the form of fruit flesh, while its seed is discarded tough it is rich in nutrient. Therefore, need to be explored the potential of date seed through product innovation of foodstuffs with a high nutritional value. The aims of this study were to 1) know how to make flour from date seed, and 2) determine nutritional content of date seed’s flour. This study was experiment and conducted in July, 2015 at the laboratory of food technology, Family Welfare Education department. Chemical analysis was used to determine nutrients content. The results showed that 1) the flour of date seed produced from the process of washing, soaking, flushing, boiling, draining, drying, grinding, and sieving; 2) the flour of date seed’s flour have a macro nutrients value. This study explains that date seed is regarded as rubbish, in fact, it has a high value that can be an alternative substitution of wheat flour.
... color additive mixtures for coloring foods. (b) Specifications. Toasted partially defatted cooked... defatted cooked cottonseed flour may be safely used for coloring foods generally, in amounts consistent... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Toasted partially defatted cooked cottonseed flour...
... color additive mixtures for coloring foods. (b) Specifications. Toasted partially defatted cooked... defatted cooked cottonseed flour may be safely used for coloring foods generally, in amounts consistent... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Toasted partially defatted cooked cottonseed flour...
Jan, Shumaila; Ghoroi, Chinmay; Saxena, Dharmesh Chandra
Flours are often unstable in relation to their flow performance, which is evident when a free-flowing material ceases to flow and the processing, handling, and production parameters depend on the inherent powder characteristics and their bulk behaviour. The present study was conducted to compare the flowability of basmati and non-basmati rice flour affecting bulk handling, which could be related to its particle size, shape and surface roughness (measured by atomic force microscopy) as well as bulk and shear properties, depending upon the processing conditions. Particle size (171.1-171.9 μm) of both samples was not significantly different. However, the flowability of the non-basmati rice flour was significantly affected by its particle shape (circularity 0.487), surface roughness (124.23 nm) and compressibility (25.32%) in comparison to basmati rice flour (circularity 0.653, surface roughness 113.59 nm and compressibility 21.09%), making it more cohesive than basmati rice flour. Also, basic flow energy was significantly higher in non-basmati flour, thus requiring more energy (147.54 mJ) to flow than basmati rice flour (130.15 mJ). Overall, flowability was analysed by applying three different pressures (3, 6 and 9 kPa), among which non-basmati rice flour was found to be less flowable (flow function coefficient (FFC) 2.33 at 9 kPa) in comparison to basmati (FFC 3.35 at 9 kPa), making bulk handling difficult. This study could be useful in designing processing equipment, hoppers and silos for rice flour handling. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.
Howard, Brandy M; Hung, Yen-Con; McWatters, Kay
The working peanut pasta formulation range determined from a previous study was used to determine the effects of varying ingredient quantities and processing conditions on the pasta's quality and consumer acceptance. The variables studied were percent peanut flour substituted for durum wheat flour (30%, 40%, and 50%), amount of carrageenan (2.4%, 2.65%, and 2.9%), and drying temperature (60, 74, and 88 °C) on the final cooked pasta quality. Properties measured include color, texture, moisture content, and cooking loss. A home-use sensory test was conducted to determine consumer preferences and the optimum range for variables studied. Color lightness values ranged from 43.53 to 65.02, decreasing (becoming darker) with increased peanut flour level and increased drying temperature. Maximum cutting force for cooked pasta ranged from 1.59 N to 3.22 N, with higher values only for pasta dried at 88 °C. Moisture content ranged from 57.35% to 69.38%, and values decreased as drying temperature increased. Cooking loss ranged from 5.14% to 7.99%, increasing with higher levels of peanut flour and decreasing with higher levels of carrageenan. When prepared with 30% peanut flour and dried at 60 °C, the pasta was lighter in color, higher in moisture, and softer in texture than the varieties dried at higher temperatures and made with higher levels of peanut flour. Response surface analysis of consumer test data revealed that the optimum peanut pasta should contain between 35% and 45% peanut flour and should be dried between 60 and 71 °C; however, the pasta with 30% peanut flour was also a popular sample in the "favorite" categories. Practical Application: Most non-gluten protein fortification studies in durum wheat pasta found decreased firmness of dry and cooked pasta, increased cooking loss, increased stickiness, and darker product color when compared to traditional pasta. Partially defatted peanut flour is a versatile food ingredient and has high protein content. Since the
Jayasinghe, M A; Ekanayake, S; Nugegoda, D B
Compare glycaemic response of foods prepared with finger millet flour, using traditional stone grinding and industrial milling. Crossover study. Healthy volunteers (n=11) consisting of five males and six females), aged between 20 and 30 years, with a body mass index of 18.5-23.5 Kgm-2. Blood glucose concentration was measured at fasting and 30, 45, 60, 90, 120 minutes after ingestion of roti and pittu made with stone ground or industrially milled finger millet flour, containing 50 g of available carbohydrates. Glycaemic Index (GI) values were expressed as the average value of the 11 subjects. Significant differences (p<0.05) in GI between similar food types made of flour milled using different methods were observed. GI for roti made of stone ground flour was 44±5 and that of roti made of industrially milled flour was 59±7. Pittu made of stone ground flour had a GI of 67±5 and GI of pittu made of industrially milled flour was 79±5. Microscopic analysis of flour samples and a sieving process using different sieve sizes showed larger particle size distribution in stone ground flour compared to industrially milled flour. Larger particle sizes in the stone ground flour compared with industrially milled flour was established as the only factor affecting the difference in GI of same type of food prepared with flour milled using different methods. There were no significant differences (p>0.05) in proximate compositions of the different foods or raw flours. Foods prepared with finger millet (kurakkan) flour with a larger particle size distribution resulted in a lower glycaemic response.
Gough, B M; Whitehouse, M E; Greenwood, C T
The literature on the role of chlorine treatment of flour for use in high-ratio cake production is discussed in relation to current knowledge of cereal chemistry and cake technology. A brief perspective of the present use of chlorine in high-ratio cake flours is included. Investigations of the uptake of gaseous chlorine by flour and its distribution among and chemical action upon the major flour components (water, protein, lipid, and carbohydrate) are assessed. The physical effects of chlorination as demonstrated by experiments with batters and cakes and by physicochemical observations of flour and its fractions are also considered. The characteristics of the starch in flour appear to be critical in high-ratio cakes. Chlorine treatment modifies the gelatinization behavior of the starch granules yet does not change their gelatinization temperature not is there evidence of chemical attack upon the starch molecules. Therefore, it is suggested that chlorine effects the necessary changes in starch behavior by reacting with the noncarbohydrate surface contaminants on the granules. Alternative methods of improving high-ratio cake flours are mentioned, particularly heat-treatment processes.
1. VIEW SHOWING FLOUR MILL (TWO-STORY BUILDING WITH GABLE ROOF JUST RIGHT OF CENTER), IN CONTEXT OF ROCKY BOY'S AGENCY, WITH MAIN AGENCY OFFICES IN FOREGROUND AND AGENCY HOUSING IN THE BACKGROUND TO LEFT, LOOKING SOUTHWEST - Rocky Boy's Agency Flour Mill, Rocky Boy, Hill County, MT
Handayani, M. N.; Cakrawati, D.; Handayani, S.
The aim of the study were to know characteristics of yam modified flour; to know the effect of modified yam flour on some physicochemical and sensory properties of synbiotic yoghurt and to determine the concentration level of modified yam flour to produce symbiotic yoghurt preferred by panelists. The reasearch was conducted using one factor complete randomized design. Modified yam flour was added to yoghurt at concentration of 2%, 4%, 6%. The effect of physical modification were investigated. Proximate analysis showed modified yam flour consist of 7.66% moisture content, 1.42% ash content, 10.16%, dietary fiber, 7.49% inulin, and 71.78% total starch content. Result obtained that modified yam flour has yield of 10.54%, the modified yam flour showed solubility and water absopsion of 77,63% and 136,65 respectively. The addition of modified yam flour on yoghurt resulted significantly difference effect on texture, but did not have significantly difference on colour, flavour and aroma. Modified yam flour added yoghurt thickness because it was gelatinized when added to yoghurt at 40°C. Sensory analysis conducted with hedonic test showed synbiotic yoghurt added with 2% of modified yam flour most preferred by panellists. Synbiotic yoghurt with 2% of modified yam flour has pH number of 4, 8 and total acid tirated of 1, 7%.
Román, Laura; González, Ana; Espina, Teresa; Gómez, Manuel
Carob flour is a product rich in fibre obtained from by-products of the locust bean gum extraction processing. The flour is commercialised with different degrees of roasting in order to improve its organoleptic characteristics. In this study, carob flour with three different roasting degrees was used to replace rice flour (15%) in gluten-free cakes and cookies. The influence of this replacement was studied on the psychochemical characteristics and acceptability of the final products. The incorporation of carob flour increased the viscosity of cake batters and increased the solid elastic-like behaviour of the cookie doughs, indicating a stronger interaction among the formula ingredients. The inclusion of carob flour, with a low time of roasting, did not lead to any significant differences in the specific volume and hardness of the cakes, but reduced cake staling and the thickness and width of the cookies. Darker colours were obtained when carob flour was incorporated into the product. The acceptability of cakes was only reduced with the addition of highly roasted carob flour, while in the case of cookies there was a decline in the acceptability of all carob flour cookies, which was mostly perceived with the highest roasting degree, something mainly attributed to the bitter taste of the products.
Carvalho, Vania Silva; Conti-Silva, Ana Carolina
A mixture design was used to investigate the effects of banana peel flour, rice flakes and oat flour on sensory acceptability of cereal bars, with subsequent evaluation of sensory profile of products identified as having high acceptability. Regions of greater response for acceptability of the cereal bars, which are dependent on the three investigated components, were found. Although having good acceptability, sensory profiles of cereal bars were different. A cereal bar with the lowest quantity of banana peel flour was described as having a higher amount of rice flakes, chewiness and crispness, while formulations with intermediate and highest quantities of banana peel flour were described by darker color, higher banana aroma and bitter taste. Contrary to expectations, banana flavor of cereal bar with highest quantity of banana peel flour was lower than cereal bars with intermediate quantities. Cereal bars were not different in terms of hardness and adhesiveness and they also had a similar sweet taste and oat flavor. The use of banana peel flour in production of cereal bars is feasible and, even with different sensory profiles, cereal bars with banana peel flour are acceptable, which may favor the development of new products for different market niches. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.
Paramita, Octavianti; Wahyuningsih, Ansori, Muhammad
This study was aimed at improving the physicochemical quality of elephant foot yam flour in Gunungpati, Semarang by chemical purification. The utilization of elephant foot yam flour in several processed food was also discussed in this study. The flour purification discussed in this study was expected to become a reference for the manufacturers of elephant foot yam flour and its processed food in Gunungpati. This study modified the elephant foot yam flour using pre - gelatinization method. The physical and chemical quality of each elephant foot yam flour purification sample were assessed using proximate analysis. The likability test was conducted for its processed food. 20 grams of elephant foot yam flour was put into a beaker glass, then 60 ml of water was added. The suspension was then heated at a temperature of 60 ° C and 70 ° C while stirred until it was homogeneous and thickened for 10, 30 and 60 minutes. The flour which had been heated was then cooled at room temperature for 1 hour and then at a temperature of 0 ° C until it was frozen. Furthermore, flour was dried in an oven at a temperature of 60 ° C for 9 hours. The dried flour was sifted with a 80 mesh sieve. Chemical test was conducted after elephant foot yam was pre-gelatinized to determine changes in the quality flour: test levels of protein, fat, crude fiber content, moisture content, ash content and starch content. In addition, color tests and granular test on elephant foot yam flour were also conducted. The pre-gelatinization as chemical treatment on elephant foot yam flour in this study was able to change the functional properties of elephant foot yam flour towards a better processing characterized by a brighter color (L = 70, a = 6 and b = 12), the hydrolysis of polysaccharides flour into shorter chain (flour content decreased to 44%), the expansion of granules in elephant foot yam resulting in a process - ready flour, and better monolayer water content of 9%. The content of protein and fiber
The chia containing omega-3 polyunsaturated fatty acids (omega-3 PUFAs) was composited with barley flour having high ß-glucan content. Both omega-3 PUFAs and ß-glucan are well known for lowering blood cholesterol and preventing coronary heart disease. Barley flour was dry blended with ground chia ...
Hashimoto, Hiroyuki; Yoshimitsu, Masato; Kiyota, Kyohei
Since wheat flour, a cause of food allergy, tends to disperse rapidly in air, it can unintentionally mix other foods during the sieving process. Our aim was to analyze the dispersal of wheat flour dust in air in order to prevent unintentional mixing. We measured particle size distribution of wheat flour, photographed the scattered flour for 60 seconds every 10 seconds after sieving through three types of flour sifter, constructed a velocity vector diagram of flour dust dispersal by each type of sifter, and measured the distance of wheat allergen dispersal over 20 minutes using a petri dish and immunochromatographic test. The particles were mainly 14.2μm and 60.4μm in diameter and settled at terminal velocities of about 8mm/s and 150mm/s, respectively. Wheat flour particles of more than 60μm (released in air by sifting) dropped mainly in the perpendicular direction, while particles of less than 30μm remained suspended and traveled 5m after sifting by all flour sifters. Our results suggested that wheat flour dust dispersed by sifting (regardless of sifter) could unintentionally mix other foods. To prevent contamination, it is necessary to control the flow of air or sift flour in a separate room.
Wang, Richard J.; Trehan, Indi; LaGrone, Lacey N.; Weisz, Ariana J.; Thakwalakwa, Chrissie M.; Maleta, Kenneth M.; Manary, Mark J.
Objective: To examine acceptability and feeding practices associated with different supplementary food items and identify practices associated with weight gain. Methods: Caregivers (n = 409) whose children had been enrolled in a trial comparing a fortified corn-soy blended flour (CSB++), soy ready-to-use supplementary food (RUSF), and soy/whey…
Trinidad, Trinidad P; Valdez, Divinagracia H; Loyola, Anacleta S; Mallillin, Aida C; Askali, Faridah C; Castillo, Joan C; Masa, Dina B
The glycaemic index (GI) of commonly consumed bakery products supplemented with increasing levels of coconut (Cocos nucifera) flour was determined in ten normal and ten diabetic subjects. Using a randomized crossover design, the control and test foods were fed in random order on separate occasions after an overnight fast. Blood samples were collected through finger prick before and after feeding and were analysed for glucose levels using a clinical chemistry analyser. The significantly low-GI (<60) foods investigated were: macaroons (GI 45.7 (sem 3.0)) and carrot cake (GI 51.8 (sem 3.3)), with 200-250 g coconut flour/kg (P<0.05). The test foods with 150 g coconut flour/kg had GI ranging from 61.3 to 71.4. Among the test foods, pan de sal (GI 87.2 (sem 5.5)) and multigrain loaf (GI 85.2 (sem 6.8)) gave significantly higher GI with 50 and 100 g coconut flour/kg respectively (P<0.05). On the other hand, granola bar and cinnamon bread with 50 and 100 g coconut flour/kg respectively gave a GI ranging from 62.7 to 71.6 and did not differ significantly from the test foods with 150 g coconut flour/kg (P<0.05). A very strong negative correlation (r -0.85, n 11, P<0.005) was observed between the GI and dietary fibre content of the test foods supplemented with coconut flour. In conclusion, the GI of coconut flour-supplemented foods decreased with increasing levels of coconut flour and this may be due to its high dietary fibre content. The results of the present study may form a scientific basis for the development of coconut flour as a functional food. However, the fat content of coconut flour-supplemented food should always be considered to optimize the functionality of coconut fibre in the proper control and management of diabetes mellitus.
Scheibel, V; Appoloni, C R
The health impact of radionuclide ingestion from foodstuffs was evaluated by the committed effective doses determined in eight commercial samples of South-Brazilian cereal flours (soy, wheat, cornmeal, cassava, rye, oat, barley and rice flours). The radioactivity traces of (228)Th, (228)Ra, (226)Ra, (40)K, (7)Be and (137)Cs were measured by gamma-ray spectrometry employing an HPGe detector of 66 % relative efficiency. The efficiency curve has taken into account the differences in densities and chemical composition between the matrix and the certified sample. The highest concentration levels of (228)Th and (40)K were 3.5±0.4 and 1469±17 Bq kg(-1) for soy flour, respectively, within the 95 % confidence level. The lower limit of detection for (137)Cs ranged from 0.04 to 0.4 Bq kg(-1). The highest committed effective dose was 0.36 μSv.y(-1) for (228)Ra in cassava flour (adults). All committed effective doses determined at the present work were lower than the International Atomic Energy Agency dose limit of 1 mSv.y(-1), to the public exposure.
El-Beltagi, Hossam S; El-Senousi, Naglaa A; Ali, Zeinab A; Omran, Azza A
Pizza being the most popular food worldwide, quality and sensory appeal are important considerations during its modification effort. This study was aimed to evaluate the quality of pizza made using two different sources of proteins, chickpea (Cicer arietinum) flour and dried carp fish powder (Cyprinus carpio). Analysis indicated nutrients richness specificity of chickpea flour (higher fiber, energy, iron, zinc, linoleic acid and total nonessential amino acids) and dried carp fish powder (higher contents of protein, fats, ash, oleic acid and total essential amino acids) complementing wheat flour to enhance nutritional value of pizza. Total plate count and thiobarbituric acid were increased (P<0.05) in dried carp fish powder after 45 days of storage, but no Coliform were detected. Wheat flour was substituted with 5, 7.5 and 10% chickpea flour or dried carp fish powder and chemical, textural, sensory and storage evaluation parameters of in pizza were investigated. Dried carp fish powder increased (P<0.05) contents of protein, ash, fats, zinc and protein digestibility of pizza. Chickpea flour increased iron and zinc contents of the pizza. Water activity (aw) was decreased in fish powder and chickpea pizza. Pizza firmness and gumminess were significantly (p<0.05) increased at every level of protein source, but cohesiveness was decreased with 10% chickpea flour. Pizza chewiness was the same (P>0.05) across the levels of two protein sources. Springiness was decreased (P<0.05) with high level (10%) dried fish powder and low/intermediate level of chickpea flour. Chickpea and dried carp fish incorporation up to 7.50% in pizza at the expense of wheat flour had no effect (P>0.05) on all sensorial parameters except for odor values. The results could be useful in utilization of chickpea flour and carp fish powder in designing nutritious pizza for consumers.
El-Senousi, Naglaa A.; Ali, Zeinab A.; Omran, Azza A.
Pizza being the most popular food worldwide, quality and sensory appeal are important considerations during its modification effort. This study was aimed to evaluate the quality of pizza made using two different sources of proteins, chickpea (Cicer arietinum) flour and dried carp fish powder (Cyprinus carpio). Analysis indicated nutrients richness specificity of chickpea flour (higher fiber, energy, iron, zinc, linoleic acid and total nonessential amino acids) and dried carp fish powder (higher contents of protein, fats, ash, oleic acid and total essential amino acids) complementing wheat flour to enhance nutritional value of pizza. Total plate count and thiobarbituric acid were increased (P<0.05) in dried carp fish powder after 45 days of storage, but no Coliform were detected. Wheat flour was substituted with 5, 7.5 and 10% chickpea flour or dried carp fish powder and chemical, textural, sensory and storage evaluation parameters of in pizza were investigated. Dried carp fish powder increased (P<0.05) contents of protein, ash, fats, zinc and protein digestibility of pizza. Chickpea flour increased iron and zinc contents of the pizza. Water activity (aw) was decreased in fish powder and chickpea pizza. Pizza firmness and gumminess were significantly (p<0.05) increased at every level of protein source, but cohesiveness was decreased with 10% chickpea flour. Pizza chewiness was the same (P>0.05) across the levels of two protein sources. Springiness was decreased (P<0.05) with high level (10%) dried fish powder and low/intermediate level of chickpea flour. Chickpea and dried carp fish incorporation up to 7.50% in pizza at the expense of wheat flour had no effect (P>0.05) on all sensorial parameters except for odor values. The results could be useful in utilization of chickpea flour and carp fish powder in designing nutritious pizza for consumers. PMID:28873098
Ye, Jiangping; Hu, Xiuting; Luo, Shunjing; McClements, David Julian; Liang, Lu; Liu, Chengmei
The composition and structure of the food matrix can have a major impact on the digestion. The aim of this work was to investigate the effects of endogenous proteins and lipids on starch digestibility in rice flour, with an emphasis on establishing the underlying physicochemical mechanisms involved. Native long-grain indica rice flour and rice flour with the lipids and/or proteins removed were subjected to a simulated digestion in vitro. A significant increase in starch digestibility was observed after removal of proteins, lipids, or both. The starch digestibility of the rice flour without lipids was slightly lower than that without proteins, even though the proteins content was about 10-fold higher than the lipids content. Microstructural analysis suggested that the proteins and lipids were normally attached to the surfaces of the starch granules in the native rice flour, thus inhibiting their contact with digestive enzymes. Moreover, the proteins and lipids restricted the swelling of the starch granules, which may have decreased their digestion by reducing their surface areas. In addition, amylose-lipid complex was detected in the rice flour, which is also known to slow down starch digestion. These results have important implications for the design of foods with improved nutritional profiles. Copyright © 2018 Elsevier Ltd. All rights reserved.
Diggory, H J; Landrigan, P J; Latimer, K P; Ellington, A C; Kimbrough, R D; Liddle, J A; Cline, R E; Smrek, A L
In January 1976, 79 persons in Jamaica were acutely poisoned by the organophosphorus insecticide parathion. Seventeen died. Cases occurred in three episodes at separate locations, but all patients had consumed wheat flour from a single lot consisting of 5264 cotton bags. Parathion in concentrations of less than 1 to 9900 ppm was identified in flour from six bags in this lot; three had splash marks. The flour had been milled in Western Europe from European wheat, carried in trucks to a dockside warehouse, and loaded aboard ship after 2-5 days' storage. In Jamaica, the flour had moved from quayside to outbreak locations along separate routes through two import houses. Site inspections and review of shipping records suggested that the likely point of contamination was the European port, where foodstuffs and insecticides were stored in the same warehouse.
Abiodun, O A; Akinoso, R
The use of trifoliate yam (Dioscorea dumetorum) flour for stiff dough 'amala' production is one of the ways to curb under-utilization of the tuber. The study evaluates the textural and sensory properties of trifoliate yam flour and stiff dough. Freshly harvested trifoliate yam tubers were peeled, washed, sliced and blanched (60 (°)C for 10 min). The sliced yam were soaked in water for 12 h, dried and milled into flour. Pasting viscosities, functional properties, brown index and sensory attributes of the flour and stiff dough were analyzed. Peak, holding strength and final viscosities ranged from 84.09 to 213.33 RVU, 81.25 to 157.00 RVU and 127.58 to 236.17 RVU respectively. White raw flour had higher viscosity than the yellow flours. The swelling index, water absorption capacity and bulk density ranged from 1.46 to 2.28, 2.11 to 2.92 ml H2O/g and 0.71 to 0.88 g/cm(3) respectively. Blanching method employed improved the swelling index and water absorption capacity of flour. The brown index values of flour and stiff dough ranged from 6.73 to 18.36 and 14.63-46.72 respectively. Sensory evaluation revealed significant differences in the colour, odour and general acceptability of the product when compared with the stiff dough from white yam.
Pandey, Hemlata; Awasthi, Pratima
Fenugreek (Pusa Early Bunching) seeds were processed by using different processing methods viz. soaking, germination and roasting. Raw and processed fenugreek seed flours were analyzed for nutritional composition, anti- nutritional, and antioxidant activity. Raw fenugreek seed flour contained higher amount of dietary fiber (45.4 %) followed by 41.7 % in soaked seed flour, 40.9 % in roasted fenugreek seed flour and 31.3 % in germinated fenugreek seed flour. Processing of fenugreek seeds improved in vitro starch digestibility and in vitro protein digestibility. Soaking, germination and roasting enhanced total phenolic content and the antioxidant activity of fenugreek seed flour as compared to raw fenugreek seed flour. The phenolic content of soaked, germinated and roasted fenugreek seed flours was 54.4, 80.8 and 48.5 mg of gallic acid equivalents/g of sample in contrast to raw fenugreek seed flour (45.4 mg of gallic acid equivalents/g of sample). The antioxidant activity of the extracts of soaked, germinated and roasted fenugreek seed flours was 60.7 %, 73.9 % and 32.0 % whereas as the raw fenugreek seed flour exhibited 18.1 % antioxidant activity. Processing of fenugreek seeds also decreased phytic acid content significantly (P < 0.05) as compared to raw seeds.
McCallum, Lisa; Paine, Shevaun; Sexton, Kerry; Dufour, Muriel; Dyet, Kristin; Wilson, Maurice; Campbell, Donald; Bandaranayake, Don; Hope, Virginia
A cluster of salmonellosis cases caused by Salmonella Typhimurium phage type 42 (STM42) emerged in New Zealand in October 2008. STM42 isolates from a wheat-based poultry feed raw material (broll; i.e., product containing wheat flour and particles of grain) had been identified in the 2 months prior to this cluster. Initial investigations indicated that eating uncooked baking mixture was associated with illness. A case-control study was conducted to test the hypothesis that there was an association between STM42 cases and consumption of raw flour or other baking ingredients. Salmonella isolates from human and non-human sources were compared using pulsed-field gel electrophoresis (PFGE) and multiple-locus variable number tandem repeat analysis (MLVA). Environmental investigations included testing flour and other baking ingredients from case homes, unopened bags of flour purchased from retail stores, and inspection of an implicated flour mill. A case-control study of 39 cases and 66 controls found cases had 4.5 times the odds of consuming uncooked baking mixture as controls (95% confidence interval [CI] 1.6-12.5, p-value 0.001). Examination of individual baking ingredients found that, after adjusting for eggs, flour had an odds ratio (OR) of 5.7 (95% CI 1.1-29.1, p-value 0.035). After adjusting for flour, eggs had an OR of 0.8 (95% CI 0.2-3.4, p-value 0.762). PFGE patterns were identical for all STM42 isolates tested; however, MLVA distinguished isolates that were epidemiologically linked to the cluster. STM42 was recovered from flour taken from four cases' homes, two unopened packs purchased from retail stores and packs from three batches of retrieved (recalled) product. This outbreak was associated with the consumption of uncooked baking mixture containing flour contaminated with STM42. The implicated flour mill initiated a voluntary withdrawal from sale of all batches of flour thought to be contaminated. Media releases informed the public about implicated flour
Cakrawati, Dewi; Rahmawati, Puji
Toddler biscuit is complementary food given to infants to help meet their nutritional needs. This research was undertaken to develop toddler biscuit with subtitution of physically modified potato flour. There were two puposes of the research, first to know the characteristics of physically modification on potato flour; secondly to know biscuit characteristics with modified potato flour substitution. There were two factor analysis in the development of biscuit; first factor was pre heating mehods and substitution rate. The research was conducted with experimental method using split plot design. The functional properties on modified potato flour as swelling capacity, water absorption capacity, solubility and viscocity were analyzed. Organoleptic analysis using quality hedonic test showed no interaction between potato starch modification and concentration of modified potato flour. Quality hedonic test showed all toddler biscuit socred in the range of “slightly like” to “like moderately”. Modifying potato starch by boiling and steaming with flour concentration of 30% producing toddler biscuit with organoleptic characteristics acceptable according to the panelists.
Arvanitoyannis, Ioannis S; Traikou, Athina
The production of flour and semolina and their ensuing products, such as bread, cake, spaghetti, noodles, and corn flakes, is of major importance, because these products constitute some of the main ingredients of the human diet. The Hazard Analysis Critical Control Point (HACCP) system aims at ensuring the safety of these products. HACCP has been implemented within the frame of this study on various products of both Asian and European origin; the hazards, critical control limits (CCLs), observation practices, and corrective actions have been summarized in comprehensive tables. Furthermore, the various production steps, packaging included, were thoroughly analyzed, and reference was made to both the traditional and new methodologies in an attempt to pinpoint the occurring differences (advantages and disadvantages) per process.
Permiakova, M D; Trufanov, V A
Changes in bread-baking properties of wheat flour caused by soybean lipoxygenase and polyunsaturated fatty acids were studied. A positive effect of soybean flour added during dough kneading in an amount of 2% was demonstrated. A method for dough fermentation increasing the loaf volume and improving organoleptic characteristics and total bread-baking estimate is recommended.
Ostermann-Porcel, María V; Rinaldoni, Ana N; Rodriguez-Furlán, Laura T; Campderrós, Mercedes E
Okara is a by-product of soymilk and of tofu elaboration that is rich in protein, fiber and vegetable oils as a source of gluten-free flour. In order to take advantage of the nutritional characteristics of okara and to be able to determine an appropriate drying methodology, microwave, rotary dryer and freeze-drying were assessed. Furthermore, flour with an enzymatic treatment was characterized as well as its functional, physicochemical, and textural properties. The results showed that the physiochemical characteristics of the flour were affected by the drying process, reaching adequate water content, and high protein and fiber content. The freeze-drying process produced clearer flours with porous structure and high water absorption capacity, and with a higher protein denaturation. Okara dried by microwave and rotary dryer exhibited a denser structure with similar functional properties and improved textural characteristics such as firmness and consistency. The microwave-produced flour was darker due to the non-enzymatic browning reactions. The enzymatic treatment employed improved the consistency of the flour. It was possible to choose the drying process to be applied according to the feasible use of the flour, intended to preserve the favorable nutritional aspects of the okara flour. Based on the results, it can be affirmed that the physicochemical properties and attributes of okara are influenced by the drying process employed. Okara dried by freeze-drying resulted in a better product because it had a low final moisture content and the highest whiteness index. The flour presented a porous structure with high solubility, which is an indicator of potential applications in foods developments. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.
Salazar, D. M.; Naranjo, M.; Pérez, L. V.; Valencia, A. F.; Acurio, L. P.; Gallegos, L. M.; Alvarez, F. C.; Amancha, P. I.; Valencia, M. P.; Rodriguez, C. A.; Arancibia, M. Y.
Ecuador, Bolivia, and Peru are countries with the highest amount of quinoa production in the world due to the proximity to the Andes. Further, Ecuador has a high production of dairy products, particularly fresh cheese of which production gives a high volume of whey, without further use, with the consequent loss of their nutritional value. The present study was performed to develop a new fortified bread through the incorporation of quinoa flour and whey at three different concentrations. The use of quinoa and whey improved the texture, shelf life and sensory characteristics of bread, compared to those prepared with wheat flour. This study shows the potential of quinoa flour and whey as ingredients in the development of baked products.
Simons, Courtney Wayne; Hall, Clifford
Beany and grassy flavors in raw edible bean flours reduce consumer acceptability of bean-based baked products. In order to improve consumer acceptability, beans may be further processed by cooking and germination. However, these operations drive up the cost of end-products. Therefore, it is necessary to develop formulations, using raw edible bean flours that have acceptable sensory attributes. In this study, cooked, germinated, and germinated/steam-blanched (GSB) pinto bean flours were used to make gluten-free cookies, and their sensory characteristics evaluated to determine how their consumer acceptability scores compared. Taste panelists (31) graded cookies made from raw pinto beans with an overall value of 6 on a 9-point hedonic scale ( p < .05). This rating was not significantly different from cookies formulated with germinated and GSB flours. Therefore, gluten-free cookies can be made using raw pinto bean flours at a 40% inclusion level, with similar sensory characteristics as those prepared with flours treated by cooking and germination. Instrumental measurement of cookie hardness and color showed no significant difference in hardness, but significant differences in color. The germinated bean flour produced cookies with a significantly lower L* value and significantly higher a*, b*, Chroma and hue values compared to the other treatments. There was no significant difference in the cookie spread ratio. Proximate composition, water absorption index (WAI), water solubility index (WSI) and gelatinization properties of the flour treatments were characterized.
Dinçer, Elif Aykin; Büyükkurt, Özlem Kiliç; Candal, Cihadiye; Bilgiç, Büşra Fatma; Erbaş, Mustafa
This study aimed to research the possibilities of using retrograded flour produced in the laboratory environment in meatballs and the characteristics of these meatballs. In the use of retrograded flour to produce meatballs, it was ensured that the meatball properties, with respect to chemical, physical and sensorial aspects, were comparable to those of meatballs produced with bread (traditional) and rusk flour (commercial). The cooking loss of meatballs produced with using retrograded flour was similar to that of commercial meatballs. Doses of retrograded flour from 5% to 20% led to a significant decrease in cooking loss, from 21.95% to 6.19%, and in the diameter of meatballs, from 18.60% to 12.74%, but to an increase in the thickness of meatballs, from 28.82% to 41.39% compared to the control. The increase of a * and b * values was shown in that the meatballs were browned on cooking with increasing retrograded flour doses because of non-enzymatic reactions. The springiness of the traditional meatballs was significantly higher than that of the other meatballs. This might have been due to the bread crumbs having a naturally springy structure. Moreover, the addition of retrograded flour in the meatballs significantly ( p <0.05) affected the hardness, springiness and cohesiveness of the meatballs with respect to textural properties. Accordingly, it is considered that the use of 10% retrograded flour is ideal to improve the sensorial values of meatballs and the properties of their structure.
This study aimed to research the possibilities of using retrograded flour produced in the laboratory environment in meatballs and the characteristics of these meatballs. In the use of retrograded flour to produce meatballs, it was ensured that the meatball properties, with respect to chemical, physical and sensorial aspects, were comparable to those of meatballs produced with bread (traditional) and rusk flour (commercial). The cooking loss of meatballs produced with using retrograded flour was similar to that of commercial meatballs. Doses of retrograded flour from 5% to 20% led to a significant decrease in cooking loss, from 21.95% to 6.19%, and in the diameter of meatballs, from 18.60% to 12.74%, but to an increase in the thickness of meatballs, from 28.82% to 41.39% compared to the control. The increase of a* and b* values was shown in that the meatballs were browned on cooking with increasing retrograded flour doses because of non-enzymatic reactions. The springiness of the traditional meatballs was significantly higher than that of the other meatballs. This might have been due to the bread crumbs having a naturally springy structure. Moreover, the addition of retrograded flour in the meatballs significantly (p<0.05) affected the hardness, springiness and cohesiveness of the meatballs with respect to textural properties. Accordingly, it is considered that the use of 10% retrograded flour is ideal to improve the sensorial values of meatballs and the properties of their structure. PMID:29725226
Flores, Alina L; Cordero, Amy M; Dunn, Michael; Sniezek, Joseph E; Arce, Miguel A; Crider, Krista S; Tinker, Sarah; Pellegrini, Cynthia; Carreón, Rita; Estrada, Jose; Struwe, Sara; Boyle, Coleen
Although strides have been made in preventing neural tube defects (NTDs), Hispanic women remain more likely to have a baby born with an NTD and less likely to know the benefits of, or consume, folic acid than women of other race/ethnic groups. In 1998, the U.S. Food and Drug Administration (FDA) mandated that all enriched cereal grain products be fortified with folic acid; however, corn masa flour (CMF), used to make many corn products that are a diet staple of many Hispanic groups, was not included under this regulation. In 2006, a Working Group began a collaboration to address this disparity by pursuing a petition to FDA to allow folic acid to be added voluntarily to CMF. The petition process was a monumental effort that required collaboration and commitment by partners representing the affected population, manufacturers, scientists, and others. The petition was approved in 2016 and folic acid is now added to CMF products, with expected results of more women achieving the recommended daily folic acid intake, more infants born per year without an NTD, and millions of dollars in direct medical expenditures averted. This 10-year public-private partnership brought together diverse groups that traditionally have different goals. The Working Group continues to work toward ensuring that fortified CMF products are available to the consumer, with the end goal of achieving a reduction in NTD-affected pregnancies. Published by Elsevier Inc.
Flores, Alina L.; Cordero, Amy M.; Dunn, Michael; Sniezek, Joseph E.; Arce, Miguel A.; Crider, Krista S.; Tinker, Sarah; Pellegrini, Cynthia; Carreón, Rita; Estrada, Jose; Struwe, Sara; Boyle, Coleen
Although strides have been made in preventing neural tube defects (NTDs), Hispanic women remain more likely to have a baby born with an NTD and less likely to know the benefits of, or consume, folic acid than women of other race/ethnic groups. In 1998, the U.S. Food and Drug Administration (FDA) mandated that all enriched cereal grain products be fortified with folic acid; however, corn masa flour (CMF), used to make many corn products that are a diet staple of many Hispanic groups, was not included under this regulation. In 2006, a Working Group began a collaboration to address this disparity by pursuing a petition to FDA to allow folic acid to be added voluntarily to CMF. The petition process was a monumental effort that required collaboration and commitment by partners representing the affected population, manufacturers, scientists, and others. The petition was approved in 2016 and folic acid is now added to CMF products, with expected results of more women achieving the recommended daily folic acid intake, more infants born per year without an NTD, and millions of dollars in direct medical expenditures averted. This 10-year public-private partnership brought together diverse groups that traditionally have different goals. The Working Group continues to work toward ensuring that fortified CMF products are available to the consumer, with the end goal of achieving a reduction in NTD-affected pregnancies. PMID:29128408
Aguilar-Raymundo, Victoria Guadalupe; Vélez-Ruiz, Jorge Fernando
Dairy desserts are complex mixtures and matrices including main components such as milk, sugar, starch, hydrocolloids, colorants and flavors, with a proteinaceous structure; they are widely consumed and present a semisolid consistency. In this work, the physicochemical and rheological properties of a dairy dessert with the addition of chickpea flour (raw and cooked, at four concentrations) were studied to determine the effect of the flour. The results indicated that luminosity (L*: 62.75-83.29), pH (6.35-7.11) and acidity (1.56-3.56) changed with the type of flour. The flow properties of the custards exhibited a non-Newtonian behavior that was well fitted by three flow models. The studied custard systems were stored for twelve days at 4 °C. The physicochemical and flow properties of the custards changed notably as a function of flour addition and storage time. From all samples, only four were analyzed with oscillatory tests, showing their mechanical spectra with elastic behavior. The dessert texture was also measured, founding that those formulated with Blanco Noroeste chickpea flour exhibited the highest values of hardness (0.356-0.391 Newton (N)) through the twelve days. It can be concluded that those custard systems with the highest content of flour presented a very good response as a potential new dairy product.
Aguilar-Raymundo, Victoria Guadalupe; Vélez-Ruiz, Jorge Fernando
Dairy desserts are complex mixtures and matrices including main components such as milk, sugar, starch, hydrocolloids, colorants and flavors, with a proteinaceous structure; they are widely consumed and present a semisolid consistency. In this work, the physicochemical and rheological properties of a dairy dessert with the addition of chickpea flour (raw and cooked, at four concentrations) were studied to determine the effect of the flour. The results indicated that luminosity (L*: 62.75–83.29), pH (6.35–7.11) and acidity (1.56–3.56) changed with the type of flour. The flow properties of the custards exhibited a non-Newtonian behavior that was well fitted by three flow models. The studied custard systems were stored for twelve days at 4 °C. The physicochemical and flow properties of the custards changed notably as a function of flour addition and storage time. From all samples, only four were analyzed with oscillatory tests, showing their mechanical spectra with elastic behavior. The dessert texture was also measured, founding that those formulated with Blanco Noroeste chickpea flour exhibited the highest values of hardness (0.356–0.391 N) through the twelve days. It can be concluded that those custard systems with the highest content of flour presented a very good response as a potential new dairy product. PMID:29463036
Tripathi, Bhumika; Platel, Kalpana
Millets, being less expensive compared to cereals and the staple for the poorer sections of population, could be the choice for fortification with micronutrients such as zinc. In view of this, finger millet, widely grown and commonly consumed in southern India, was explored as a vehicle for fortification with zinc in this investigation. Finger millet flour fortified with either zinc oxide or zinc stearate so as to provide 50mg zinc per kg flour, was specifically examined for the bioaccessibility of the fortified mineral, as measured by in vitro simulated gastrointestinal digestion procedure and storage stability. Addition of the zinc salts increased the bioaccessible zinc content by 1.5-3 times that of the unfortified flour. Inclusion of EDTA along with the fortified salt significantly enhanced the bioaccessibility of zinc from the fortified flours, the increase being three-fold. Inclusion of citric acid along with the zinc salt and EDTA during fortification did not have any additional beneficial effect on zinc bioaccessiblity. Moisture and free fatty acid contents of the stored fortified flours indicated the keeping quality of the same, up to 60 days. Both zinc oxide and zinc stearate were equally effective as fortificants, when used in combination with EDTA as a co-fortificant. The preparation of either roti or dumpling from the fortified flours stored up to 60 days did not result in any significant compromise in the bioaccessible zinc content. Thus, the present study has revealed that finger millet flour can effectively be used as a vehicle for zinc fortification to derive additional amounts of bioaccessible zinc, with reasonably good storage stability, to combat zinc deficiency. Copyright 2009 Elsevier GmbH. All rights reserved.
Keppler, S; Bakalis, S; Leadley, C E; Sahi, S S; Fryer, P J
An accurate method to heat treat flour samples has been used to quantify the effects of heat treatment on flour functionality. A variety of analytical methods has been used such as oscillatory rheology, rheomixer, solvent retention capacity tests, and Rapid Visco Analysis (RVA) in water and in aqueous solutions of sucrose, lactic acid, and sodium carbonate. This work supports the hypothesis that heat treatment facilitates the swelling of starch granules at elevated temperature. Results furthermore indicated improved swelling ability and increased interactions of flour polymers (in particular arabinoxylans) of heat treated flour at ambient conditions. The significant denaturation of the proteins was indicated by a lack of gluten network formation after severe heat treatments as shown by rheomixer traces. Results of these analyses were used to develop a possible cake flour specification. A method was developed using response surfaces of heat treated flour samples in the RVA using i) water and ii) 50% sucrose solution. This can uniquely characterise the heat treatment a flour sample has received and to establish a cake flour specification. This approach might be useful for the characterisation of processed samples, rather than by baking cakes. Hence, it may no longer be needed to bake a cake after flour heat treatment to assess the suitability of the flour for high ratio cake production, but 2 types of RVA tests suffice. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.
Lima, Elaine C S; Feijo, Márcia B S; Freitas, Maria C J; dos Santos, Edna R; Sabaa-Srur, Armando U O; Moura, Luciana S M
Cassava is regarded as the nutritional base of populations in developing countries, and flour, product made of cassava, is the most consumed in the world. The cassava leaves are very rich in vegetable proteins, but a big amount is lost in processing the crop. The objective of this study was to do a sensory evaluation of cassava flour to which a protein concentrate obtained from cassava leaves (CPML) was added. The CPML was obtained from cassava leaves by isoelectric precipitation and added to cassava paste for preparation of flour in three parts 2.5, 5, and 10%. The acceptance test was done by 93 consumers of flour, using hedonic scale of 7 points to evaluate characteristics like color, scent, flavor, bitterness, texture, and overall score. By the method of quantitative descriptive analysis (QDA), eight trained tasters evaluated the following characteristics: whitish color, greenish color, cassava flavor, bitter flavor, characteristic flavor, lumpiness, raw texture, leaf scent, and cassava scent. The acceptability test indicated that flour cassava with 2.5 was preferred. Whitish color, greenish color, cassava flavor, bitter flavor, salty flavor, characteristic flavor, lumpiness texture, raw texture, and the smell of the leaves and cassava flour were the main descriptors defined for flour cassava with CPML has better characteristics. PMID:24804041
Xie, Wei-Qi; Gong, Yi-Xian; Yu, Kong-Xian
This paper proposed a new reaction headspace gas chromatographic (HS-GC) method for efficiently quantifying the total starch content in wheat flours. A certain weight of wheat flour was oxidized by potassium dichromate in an acidic condition in a sealed headspace vial. The results show that the starch in wheat flour can be completely transferred to carbon dioxide at the given conditions (at 100 °C for 40 min) and the total starch content in wheat flour sample can be indirectly quantified by detecting the CO 2 formed from the oxidation reaction. The data showed that the relative standard deviation of the reaction HS-GC method in the precision test was less than 3.06%, and the relative differences between the new method and the reference method (titration method) were no more than 8.90%. The new reaction HS-GC method is automated, accurate, and can be a reliable tool for determining the total starch content in wheat flours in both laboratory and industrial applications. Graphical abstract The total starch content in wheat flour can be indirectly quantified by the GC detection of the CO 2 formed from the oxidation reaction between wheat flour and potassium dichromate in an acidic condition.
Cecep Erwan Andriansyah, Raden; Rahman, Taufik; Herminiati, Ainia; Rahman, Nurhaidar; Luthfiyanti, Rohmah
The modified cassava flour can be made using the method of the autoclaving cooling cycle (AAC). The stability of the warming can be seen from the decreasing value of breakdown viscosity, while the stability of the stirring process can be seen by the decreasing value of setback viscosity. The stages of research include: (1) the making of cassava flour, (2) the making of modified cassava flour by the method of treatment of ACC with a variety of flour concentration and autoclaving time, (3) chemical analysis of the moisture, ash, fat, protein, carbohydrate; The functional properties of the pasting characteristics to the initial temperature of the pasting, peak viscosity, hot paste viscosity, breakdown viscosity, cold paste viscosity and setback viscosity. The result shows that cassava flour modified by treatment of flour concentration 16% and autoclaving time 41 minutes having pasting code and pasting viscosity which is resistant to high temperature. Flour with this character is flour that is expected to maintain the texture of processed products with a paste form that remains stable. Utilization of modified cassava flour by the ACC method can be applied to the pasting product such as noodle and spaghetti, hoping to support for food diversification program to reduce dependence on wheat flour in Indonesia.
Chapman, Royal N.
The confused flour beetle (Tribolium confusum) was chosen for this study because it lives in a food which ordinarily contains no living organisms. The death rates are greater in cultures which are handled daily than in those which are not handled but when all are handled alike the results are comparable. The results from experiments with individual beetles in various kinds of flour were plotted with instars (larval stages) on the ordinate and time in days on the abscissa, using the results from control experiments in wheat flour to determine the length of the various instars from an "x = y" formula. The curves of development were found to be straight lines throughout all but the last instar. The curve for the last instar during which the larva transformed deviated from the straight line in certain foods, notably rice flour. When mass cultures were used the death and transformation curves were plotted for each synthetic food. A comparison of the curves from wheat flour and the synthetic foods shows that the first parts of the curves are very much alike in all cases and that a few resemble the control in every respect except that the transformation curve has been moved back for a considerable time. The death curves for the mass cultures are not smooth but show sudden increase in death at approximately the times of molting. These curves may therefore be compared with the records from individual beetles. PMID:19872096
The primary objective of this research was to develop an effective process to increase the resistant starch content of sorghum flour. A secondary objective was to investigate the role of the sorghum proteins on starch digestibility. Samples of white sorghum flour (28.9% amylose content) with differe...
Martinez, Cristina S; Ribotta, Pablo D; Añón, María Cristina; León, Alberto E
The technological and sensory quality of pasta made from bread wheat flour substituted with wholemeal amaranth flour (Amaranthus mantegazzianus) at four levels, 15, 30, 40 and 50% w/w was investigated. The quality of the resulted pasta was compared to that of control pasta made from bread wheat flour. The flours were analyzed for chemical composition and pasting properties. Cooking behavior, color, raw and cooked pasta texture, scanning electron microscopy and sensory evaluation were determined on samples. The pasta obtained from amaranth flour showed some detriment of the technological and sensory quality. So, a maximum substitution level of 30% w/w was defined. This is an equilibrium point between an acceptable pasta quality and the improved nutritional and functional properties from the incorporation of amaranth flour.
Lopez, Hubert W; Duclos, Virgile; Coudray, Charles; Krespine, Virginie; Feillet-Coudray, Christine; Messager, Arnaud; Demigné, Christian; Rémésy, Christian
We compared the effects of different kinds of bread fermentation on mineral bioavailability. Wistar rats were fed one of the following experimental diets for 21 d: control, reconstituted whole wheat flour (white flour plus bran), yeast bread, and sourdough bread. The apparent mineral absorption and intestinal fermentation were measured in each animal. Phytate contents in yeast and sourdough bread were lower than in reconstituted whole wheat flour (-52% and -71%, respectively). Total cecal pool of short-chain fatty acids, in particular the butyrate pool, was significantly increased by the ingestion of unrefined products. Calcium homeostasis was not modified by these nutritional conditions, whereas magnesium absorption was significantly greater in rats fed the control and sourdough diets than in those consuming whole wheat flour and yeast bread. Magnesium kidney excretion was slightly stimulated by sourdough bread. Compared with the control diet, iron balance was significantly reduced by reconstituted whole wheat flour diet. Yeast bread making counteracted the deleterious effects of whole wheat on iron absorption, whereas sourdough bread making enhanced iron absorption. Further, liver and plasma iron and transferrin saturation levels were lower in rats adapted to the flour diet than in other groups. Zinc absorption was strongly depressed in the presence of unprocessed reconstituted whole wheat flour in the diet, but yeast fermentation afforded a zinc assimilation comparable to the control diet, whereas the sourdough bread led to maximal zinc absorption. Copper absorption increased significantly when rats were fed the sourdough bread, whereas unprocessed whole flour depressed copper absorption (-41% versus control diet). Mineral bioavailability from reconstituted whole wheat flour can be improved by bread making. Although yeast fermentation minimizes the unfavorable effects of phytic acid, sourdough bread is a better source of available minerals, especially magnesium
Wheat tortillas were enriched with whole barley flour (WBF) of different particle sizes including 237 micros (regular-R), 131 micros (intermediate-IM), and 68 micros (microground-MG). Topographical and fluorescent microstructure images of flours, doughs and tortillas were examined. Flours and tort...
Bamidele, Oluwaseun P; Akanbi, Charles T
The effect of gamma irradiation at various doses (5, 10, 15, 20 kGy) was observed on pigeon pea flour stored for 3 months on proximate composition, functional properties, and peroxide value. Sensory evaluation was also carried out on bean cake (moinmoin) made from nonirradiated and irradiated pigeon pea flour. The results showed that stored gamma-irradiated samples had significantly lower (P < 0.05) value of protein and little or no effect on moisture content. There were slight decreases in crude fiber and ash content of the irradiated samples compared with the control sample. The result of functional properties of the irradiated flours showed slight increase in water absorption capacity, swelling capacity and bulk density. The peroxide value of crude oil increased significantly with dose increases for the period of storage. The sensory evaluation of moinmoin samples prepared from irradiated pigeon pea flour showed no significant difference from the moinmoin sample prepared from nonirradiated flour. It can be concluded that gamma irradiation can extend the shelf life of pigeon pea flour. PMID:24804044
Bamidele, Oluwaseun P; Akanbi, Charles T
The effect of gamma irradiation at various doses (5, 10, 15, 20 kGy) was observed on pigeon pea flour stored for 3 months on proximate composition, functional properties, and peroxide value. Sensory evaluation was also carried out on bean cake (moinmoin) made from nonirradiated and irradiated pigeon pea flour. The results showed that stored gamma-irradiated samples had significantly lower (P < 0.05) value of protein and little or no effect on moisture content. There were slight decreases in crude fiber and ash content of the irradiated samples compared with the control sample. The result of functional properties of the irradiated flours showed slight increase in water absorption capacity, swelling capacity and bulk density. The peroxide value of crude oil increased significantly with dose increases for the period of storage. The sensory evaluation of moinmoin samples prepared from irradiated pigeon pea flour showed no significant difference from the moinmoin sample prepared from nonirradiated flour. It can be concluded that gamma irradiation can extend the shelf life of pigeon pea flour.
de la Hera, Esther; Gomez, Manuel; Rosell, Cristina M
Rice flour is becoming very attractive as raw material, but there is lack of information about the influence of particle size on its functional properties and starch digestibility. This study evaluates the degree of dependence of the rice flour functional properties, mainly derived from starch behavior, with the particle size distribution. Hydration properties of flours and gels and starch enzymatic hydrolysis of individual fractions were assessed. Particle size heterogeneity on rice flour significantly affected functional properties and starch features, at room temperature and also after gelatinization; and the extent of that effect was grain type dependent. Particle size heterogeneity on rice flour induces different pattern in starch enzymatic hydrolysis, with the long grain having slower hydrolysis as indicated the rate constant (k). No correlation between starch digestibility and hydration properties or the protein content was observed. It seems that in intact granules interactions with other grain components must be taken into account. Overall, particle size fractionation of rice flour might be advisable for selecting specific physico-chemical properties. Copyright © 2013. Published by Elsevier Ltd.
Correia, P R; Beirão-da-Costa, M L
The application of starchy flours from different origins in food systems depends greatly on information about the chemical and functional properties of such food materials. Acorns are important forestry resources in the central and southern regions of Portugal. To preserve these fruits and to optimize their use, techniques like drying are needed. The effects of different drying temperatures on starch-related functional properties of acorn flours obtained from dried fruits of Quercus rotundifolia (QR) and Quercus suber (QS) were evaluated. Flours were characterized for amylose and resistant starch (RS) contents, swelling ability, and gelatinization properties. Drying temperature mainly affected amylose content and viscoamylographic properties. Amylograms of flours from fruits dried at 60 °C displayed higher consistency (2102 B.U. and 1560 B.U., respectively, for QR and QS). The transition temperatures and enthalpy were less affected by drying temperature, suggesting few modifications in starch structure during drying. QR flours presented different functional properties to those obtained from QS acorn flours. The effect of drying temperatures were more evident in QR.
Zheng, Zeqi; Stanley, Roger; Gidley, Michael J; Dhital, Sushil
Gluten free pasta was made from raw banana flour in combination with vegetable gums and protein for comparison to pasta similarly made from wheat flour. After cooking, it was found that the banana flour pasta was less susceptible to alpha-amylase digestion compared to conventional wheat flour pasta. Release of glucose by alpha-amylase digestion followed first order kinetics with an initial rapid rate of digestion and a subsequent second slower phase. The structure of green banana pasta starch at the inner and outer pasta surfaces was observed under confocal laser scanning microscopy (CLSM) and the viscosities of the flour mixtures were measured by a Rapid Visco Analyser (RVA). The digestibility of banana flour pasta was found to be related, not only to the properties of the starch granules, but also to the protein network of the surrounding food matrix. The effects of gums and proteins on pasta formation and digestibility are discussed in the context of its potential use as a gluten free lower glycaemic alternative to conventional wheat based pastas.
Charles R. Frihart; Linda F. Lorenz
While economics dictate that soy-based wood adhesives be made with soy flour, much of the recent literature on soy-based wood adhesives has involved using soy protein isolate. The obvious assumption is that the additional carbohydrates in the flour but not in the isolate only serve as inert diluents. Our studies have shown that the isolate can provide 10 times the wet...
Brütsch, Linda; Tribolet, Liliane; Isabettini, Stéphane; Soltermann, Patrick; Baumann, Andreas; Windhab, Erich J
Ever-growing demand for gluten-free products calls for the development of novel food processing techniques to widen the range of existing baked goods. Extensive research has been targeted towards recipe optimization, widely neglecting the tailoring potential of process-induced structuring of gluten-free raw materials. Herein, we address this shortcoming by demonstrating the potential of rubbery milling for the generation of structure and techno-functionality in breads obtained from a variety of rice flour types. Moisture and temperature induced state transitions during milling were exploited to tailor the physicochemical properties of the flour. Moisture addition during conditioning of the different rice varieties and milling in the rubbery state considerably decreased starch damage due to more gentle disintegration. The degree of starch damage dictated the water absorption capacity of the rice flour types. Flour types with reduced starch damage upon milling offered lower dough densities, yielding bread loafs with a higher volume and better appearance. The choice of rice variety enables fine-tuning of the final product quality by influencing the dough viscoelasticity, which defines the final loaf volume. Whole grain rice flour dramatically increased the loaf volume, whilst simultaneously offering nutritional benefits. Combining the proposed functionalised flour types with current and future advances in product recipes paves the way towards optimised gluten-free goods.
Himeda, Makhlouf; Njintang Yanou, Nicolas; Fombang, Edith; Facho, Balaam; Kitissou, Pierre; Mbofung, Carl M F; Scher, Joel
The physicochemical, alveographic and sensory characteristics of precooked taro-wheat composite flours and their biscuits were investigated. A 2x7 factorial design consisting of two varieties of taro flour (Red Ibo Ngaoundere, RIN, and egg-like varieties) and 7 levels of wheat substitutions (0, 5, 10, 15, 20, 25 and 30 %) was used for this purpose. It was observed that water absorption capacity (range 95-152 g/100 g), water solubility index (range 18.8-29.5 g/100 g) and swelling capacity (range 125.4-204.6 mL/100 g) of composite flours significantly (p < 0.05) increased with increase in taro level. Conversely the dough elasticity index (range 59.8-0 %), extensibility (78-22 mm) and strength (range 281-139 × 10(-4) joules) significantly (p < 0.05) diminished with increase in wheat substitution. Up to 10 % substitution with RIN taro flour and 15 % with egg-like taro flour, the composite taro-wheat dough exhibited elasticity indices acceptable for the production of baking products, whereas at all levels of taro substitution, the composite biscuits samples were either acceptable as or better (5-10 % substitution with RIN flour) than 100 % wheat biscuit.
Affandi, D. R.; Praseptiangga, D.; Nirmala, F. S.; Sigit Amanto, B.; Atmaka, W.
Indonesia is a tropical country that has great potential in agriculture. Tubers and legumes as examples of the potential commodities are needed to be more developed. Flour production is one of the best alternatives to be chosen as the downstream stage of the tubers and legumes utilization. Greater yam (Dioscorea alata) and jack bean (Canavalia ensiformis) were used in this study. This study was conducted to determine best formula of composite flour based on physical, chemical, and functional characterization of composite flour produced. Variations of formula used was the ratio of greater yam flour and jack bean flour, which were 85:15 (F1), 70:30 (F2), 55:45 (F3), respectively, and this study was conducted using completely randomized design (CRD). The formula variations didn’t show any significant effect on the water absorption capability, water holding capacity (WHC), oil holding capacity (OHC), swelling power, and starch content of the composite flour. However, the formula variations had a significant influence on the colour, proximate parameters, amylose and amylopectin content, resistant starch content, dietary fibre, total phenol, and antioxidant activity of the composite flour produced. Considering the results of physical, chemical, and functional characteristics of composite flour, formula (F1) was selected as the best composite flour developed from greater yam and jack bean flours.
Rice flour was thermo-mechanically modified by steam jet-cooking and the physico-chemical and rheological properties of the resulting product were characterized. Then, its performance in frying batters was evaluated as an oil barrier. Compared to native rice flour, the steam jet-cooked rice flour ...
Xie, Wei-Qi; Yu, Kong-Xian; Gong, Yi-Xian
The purpose of this work is to introduce a new method for quantitatively analyzing water absorption capacity in wheat flour by a headspace gas chromatographic technique. This headspace gas chromatographic technique was based on measuring the water vapor released from a series of wheat flour samples with different contents of water addition. According to the different trends between the vapor and wheat flour phase before and after the water absorption capacity in wheat flour, a turning point (corresponding to water absorption capacity in wheat flour) can be obtained by fitting the data of the water gas chromatography peak area from different wheat flour samples. The data showed that the phase equilibrium in the vial can be achieved in 25 min at desired temperature (35°C). The relative standard deviation of the reaction headspace gas chromatographic technique in water absorption capacity determination was within 3.48%, the relative differences has been determined by comparing the water absorption capacity obtained from this new analytical technique with the data from the reference technique (i.e., the filtration method), which are less than 8.92%. The new headspace gas chromatographic method is automated, accurate and be a reliable tool for quantifying water absorption capacity in wheat flour in both laboratory research and mill applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Łuczycka, D.; Czubaszek, A.; Fujarczuk, M.; Pruski, K.
Possibilities of using electric methods for determining admixtures of oat meal to wheat flour, type 650 are presented. In wheat flour, oat meal and mixtures containing 10, 20 and 30% of the oat meal, moisture, protein, starch and ash content, sedimentation value, yield and softening of wet gluten were determined. In samples containing 0, 5, 10, 15, 20, 25, 30 and 100% of oat meal, the dielectric loss factor and conductivity were determined using an impedance analyzer for electromagnetic field frequency ranging from 0.1-20 kHz. It was found that the dielectric loss factor varied for tested material. The best distinguishing between tested mixtures was obtained at the measuring electromagnetic field frequency of 20 kHz. The loss factor was significantly correlated with the yield of wet gluten and the sedimentation value, parameters indicating the amount and quality of gluten proteins in flour.
Wang, Youyong; Song, Yongming; Du, Jun; Xi, Zhenhao; Wang, Qingwen
Polylactide (PLA)/wood flour composite foam were prepared through a batch foaming process. The effect of the chain extender on the crystallization behavior and dynamic rheological properties of the PLA/wood flour composites were investigated as well as the crystal structure and cell morphology of the composite foams. The incorporation of the chain extender enhanced the complex viscosity and storage modulus of PLA/wood flour composites, indicating the improved melt elasticity. The chain extender also led to a decreased crystallization rate and final crystallinity of PLA/wood flour composites. With an increasing chain extender content, a finer and more uniform cell structure was formed, and the expansion ratio of PLA/wood flour composite foams was much higher than without the chain extender. Compared to the unfoamed composites, the crystallinity of the foamed PLA/wood flour composites was improved and the crystal was loosely packed. However, the new crystalline form was not evident. PMID:28846604
Puncha-arnon, Santhanee; Uttapap, Dudsadee
Starch and flour from the same rice grain source (with 20, 25 and 30% moisture content) were exposed to heat-moisture treatment (HMT) at 100 °C for 16 h in order to investigate whether there were differences in their susceptibility to modification by HMT and, if any, to determine the main causes of the differences. HMT had a far greater effect on paste viscosity of flour than of starch. A significant increase in paste viscosity after removal of proteins from HMT flour - as well as images of fast green-stained HMT flour gels - indicated that an important role was played by proteins in affecting properties of the modified samples. Greater effects of HMT on thermal parameters of gelatinization and gel hardness values of flours were observed - more so than those for starches. Following this observation, it was ascertained that components in rice flour other than rice starch granules also underwent alterations during HMT. Copyright © 2012 Elsevier Ltd. All rights reserved.
Sebecić, Blazenka; Dragojević, I Vedrina; Horvatić, M
To evaluate some wheat flour based hard biscuits produced in Croatia with regard to their Fe and Mn contents and thereby their functionality, Fe and Mn are determined by cold-vapor atomic absorption spectrometry (CVAAS) in seven biscuits: classic white wheat flour biscuits and in dietetic biscuits enriched with whole wheat grain flour or whole wheat grain grits, soya flour and milk. Presented data show that Fe contents in seven analyzed biscuits range from 9.32 up to 24.80 mg/kg while Mn contents range from 3.76-16.37 mg/kg depending on type and share of cereal milling products and mineral content of other raw materials used. Thus, enriched biscuits produced from wheat flour type 850 and whole wheat grain flour, having the highest concentrations of Fe and Mn, were about 150% and 250%, respectively, richer in those elements in comparison with classic white flour biscuits of Petit Beurre type. Data show that wheat flour based hard biscuits, particularly enriched biscuits, can be considered as a good additional source of Fe and Mn in diets.
Jamal Mirbagheri; Mehdi Tajvidi; John C. Hermanson; Ismaeil Ghasemi
Hybrid composites of wood flour/kenaf fiber and polypropylene were prepared at a fixed fiber to plastic ratio of 40 : 60 and variable ratios of the two reinforcements namely 40 : 0, 30 : 10, 20 : 20, 10 : 30, and 0 : 40 by weight. Polypropylene was used as the polymer matrix, and 40–80 mesh kenaf fiber and 60–100 mesh wood flour were used as the...
The effect of condensed tannins (CT) on in vitro starch digestibility in cooked, wholegrain sorghum flours and on corn starch was investigated. CT extracts were also tested for their inhibitory effect on alpha-amylases. Rapidly digestible starch, slowly digestible starch, and resistant starch were n...
Smith, T A; Lumley, K P
The purpose of the study was to determine the prevalence and causation of work-related asthmatic symptoms in a population exposed to grain, flour and other ingredient dusts. Where workers complained of asthmatic symptoms which were the result of dust exposure, follow-up aimed to identify whether the symptoms were the result of sensitisation or of non-specific irritation. A questionnaire was presented to 3,450 workers who had exposure to dust during the course of flour milling (528), bread baking (1,756), cake baking (209) and other activities in food preparation (957). Those with positive responses were followed-up by taking a formal history, examination, skin prick testing and serial peak flow measurement. The overall prevalence of work-related asthmatic symptoms was 4.4% (153 out of 3,450). In the group who were followed-up (128 out of 153), non-specific respiratory irritation was thought to be the cause in 90 (2.6%), whilst sensitisation was responsible for symptoms in 12 (0.3%). Of the 12 cases due to sensitisation, the agents responsible were: fungal amylase (10 cases, all associated with bread baking), flour (one case, associated with flour packing), and grain (one case, associated with flour milling). Non-specific irritation is considerably more common than sensitisation as the cause of work-related asthmatic symptoms in flour milling, baking and other flour-based industries. The prevalence of sensitisation to flour is very low (less than 1 in 1,000) in all these industries. The principal sensitiser encountered in modern plant bakeries appears to be fungal amylase. The most important source of exposure to fungal amylase is probably the debagging, sieving, weighing and mixing of bread improvers.
Qin, Jianwei; Kim, Moon S.; Chao, Kuanglin; Gonzalez, Maria; Cho, Byoung-Kwan
Excessive use of benzoyl peroxide (BPO, a bleaching agent) in wheat flour can destroy flour nutrients and cause diseases to consumers. A macro-scale Raman chemical imaging method was developed for direct detection of BPO mixed in the wheat flour. A 785 nm line laser was used in a line-scan Hyperspectral Raman imaging system. Raman images were collected from wheat flour mixed with BPO at eight concentrations (w/w) from 50 to 6,400 ppm. A sample holder (150×100×2 mm3) was used to present a thin layer (2 mm thick) of the powdered sample for image acquisition. A baseline correction method was used to correct the fluctuating fluorescence signals from the wheat flour. To isolate BPO particles from the flour background, a simple thresholding method was applied to the single-band fluorescence-free images at a unique Raman peak wavenumber (i.e., 1001 cm-1) preselected for the BPO detection. Chemical images were created to detect and map the BPO particles. Limit of detection for the BPO was estimated in the order of 50 ppm, which is on the same level with regulatory standards.
Hasegawa, Ayako; Ogawa, Takenobu; Adachi, Shuji
Moisture sorption isotherms were measured at 25 °C for untreated, dry-heated and pre-gelatinized durum wheat flour samples. The isotherms could be expressed by the Guggenheim-Anderson-de Boer equation. The amount of water sorbed to the untreated flour was highest for low water activity, with water sorbed to the pre-gelatinized and dry-heated flour samples following. The dry-heated and pregelatinized flour samples exhibited the same dependence of the moisture content on the partial molar volume of water at 25 °C as the untreated flour. The partial molar volume of water was ca. 9 cm(3)/mol at a moisture content of 0.03 kg-H2O/kg-d.m. The volume increased with increasing moisture content, and reached a constant value of ca. 17.5 cm(3)/mol at a moisture content of 0.2 kg-H2O/kg-d.m. or higher.
Rose, Devin J; Williams, Emily; Mkandawire, Nyambe L; Weller, Curtis L; Jackson, David S
Frybreads were prepared using wheat flour and wheat-sorghum composite flours (refined and whole grain; white, tannin-free and red, tannin-containing) at 0, 25, 50, and 75% sorghum flour. Hardness, volume, specific volume, color, and oil uptake were determined. Frybreads made with refined white, tannin-free sorghum were also evaluated in a sensory panel. Substitution of sorghum flour for wheat flour reduced the volume and increased the darkness of the fried dough pieces compared with wheat flour controls. Oil absorption was unaffected when using white, tannin-free sorghum. When using red, tannin-containing sorghum, oil absorption increased for refined flour and decreased for whole grain flour, suggesting that a component only present in the whole grain tannin-containing Sorghum--perhaps tannins themselves--may decrease oil uptake. Panelists rated frybreads containing up to 50% white, tannin-free sorghum flour as not significantly different from control frybreads made with refined wheat flour.
Lyons, A. J.; Pridham, T. G.; Rogers, R. F.
Mesophilic Actinomycetales were isolated from whole corn, brewer's grits, and break flour received from three different mills. In addition, strains were isolated from high-moisture (27%) field corn; high-moisture, silo-stored corn (untreated); and high-moisture corn treated with ammonia, ammonium isobutyrate, or propionic-acetic acid. According to standard techniques, 139 strains were extensively characterized and 207 additional strains were partially characterized. On the basis of these characterizations, the streptomycete strains were identified by both the systems of Pridham et al. and Hütter because these systems are rapid and accurate. In general, only Streptomyces griseus (Krainsky) Waksman and Henrici was isolated from high-moisture whole corn (treated or untreated) except from grain exposed to ammonium isobutyrate. Strains isolated from high-moisture corn subjected to that treatment represented both S. griseus and S. albus (Rossi Doria) Waksman and Henrici. The strains isolated from corn and corn products from the three mills were identified with a number of streptomycete species. Of all Actinomycetales isolated, only three were not streptomycetes—two from brewer's grits and one from break flour. Images PMID:803819
Reyes Aguilar, María José; Palomo, Patricia de; Bressani, Ricardo
The present investigation was developed as a contribution to Guatemalan's elderly food and nutrition. Its main objective was to evaluate the chemical, nutritional and sensory quality of bread prepared from the partial substitution of wheat flour with rice flour. Wheat flour substitutions with rice flour in the order of 15, 20, 30, 40, 50 and 60% were evaluated. Differences with the control (100% wheat bread) were found during the process of preparation, as well as texture, volume, height, weight and specific volume. Important effects in dough handling were noted specifically in the 40, 50 and 60% rice bread. Thus, a sandy texture was found in breads of higher rice levels. The bread protein quality increased with the level of substitution; however the protein quality difference between the wheat bread and the bread with 60% rice flour did not achieve statistical significance. Based on a statistical analysis of the physical properties the bread with 30 and 40% rice flour was selected, and through a preference test between these last two, the 30% rice flour bread was selected as the sample best suited to the present study's purposes. This bread was not different to wheat bread in many nutritional parameters, although in others it showed to be superior. Each serving size of bread has a weight of 80 grams (2 slices) that contributes adequate quantity of calories, protein and sodium, although a little less dietary fiber than 100% wheat bread.
Pretheep-Kumar, P; Mohan, S; Ramaraju, K
Studies were conducted to evaluate the effect of a protein-enriched pea (Pisum sativum var. Bonneville) flour extract against the rice weevil, Sitophilus oryzae in its repellency, toxicity, effect on fecundity, stability and sensory properties. Milled rice admixed with pea flour extract at 1% concentration significantly repelled S. oryzae. Mortality of S. oryzae was found to increase and fecundity was markedly suppressed, in rice treated with 1% pea flour extract. The toxicity and reproductive effects of the pea protein-enriched rice were found to be stable for a period of 5 months. The sensory characteristics of stored rice when eaten were not affected by the treatment with pea flour extract. This study indicates that the protein-enriched flour extract obtained from the Bonneville pea may be feasible to protect stored milled rice from insect attack.
Zhao, Juan; Peng, Yankun; Chao, Kuanglin; Qin, Jianwei; Dhakal, Sagar; Xu, Tianfeng
Benzoyl peroxide is a common flour additive that improves the whiteness of flour and the storage properties of flour products. However, benzoyl peroxide adversely affects the nutritional content of flour, and excess consumption causes nausea, dizziness, other poisoning, and serious liver damage. This study was focus on detection of the benzoyl peroxide added in wheat flour. A Raman scattering spectroscopy system was used to acquire spectral signal from sample data and identify benzoyl peroxide based on Raman spectral peak position. The optical devices consisted of Raman spectrometer and CCD camera, 785 nm laser module, optical fiber, prober, and a translation stage to develop a real-time, nondestructive detection system. Pure flour, pure benzoyl peroxide and different concentrations of benzoyl peroxide mixed with flour were prepared as three sets samples to measure the Raman spectrum. These samples were placed in the same type of petri dish to maintain a fixed distance between the Raman CCD and petri dish during spectral collection. The mixed samples were worked by pretreatment of homogenization and collected multiple sets of data of each mixture. The exposure time of this experiment was set at 0.5s. The Savitzky Golay (S-G) algorithm and polynomial curve-fitting method was applied to remove the fluorescence background from the Raman spectrum. The Raman spectral peaks at 619 cm-1, 848 cm-1, 890 cm-1, 1001 cm-1, 1234 cm-1, 1603cm-1, 1777cm-1 were identified as the Raman fingerprint of benzoyl peroxide. Based on the relationship between the Raman intensity of the most prominent peak at around 1001 cm-1 and log values of benzoyl peroxide concentrations, the chemical concentration prediction model was developed. This research demonstrated that Raman detection system could effectively and rapidly identify benzoyl peroxide adulteration in wheat flour. The experimental result is promising and the system with further modification can be applicable for more products in near
Shevkani, Khetan; Singh, Narpinder; Kaur, Amritpal; Rana, Jai Chand
The present work was carried out to evaluate physicochemical (composition, hunter color, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis [SDS-PAGE]), pasting, and functional properties (foaming, emulsification, water, and fat absorption capacity) of amaranth full-fat flours from 6 lines/cultivars (AFs), and to see the effects of lipid removal/defatting on these properties. Protein, ash, and lipid content of AFs ranged between 12.5% to 15.2%, 3.0% to 3.5%, and 7.1% to 8.0%, respectively. The flours showed a number of bands between 97 and 7 kDa, with main subunits of approximately 58, 37, 33, 31, 23, and 16 kDa in the SDS-PAGE profiles. The protein content and L* value increased, while b* values decreased following defatting for most of the lines/cultivars. The defatted flours (DAFs) had higher final viscosity and stability (lower breakdown viscosity) as compared to counterpart AFs. The protein profiling of the flours was not affected with the lipid removal/defatting. However, water absorption capacity and foam stability of the flours improved upon defatting. Principal component analysis revealed that pasting temperature was positively related to lipid content, while breakdown viscosity was negatively related to protein content. Foaming properties (capacity and stability) showed negative relationship with lipid content, and positive with protein content, ash content, water, and fat absorption capacity. Amaranth grains are known to have higher amount of proteins and lipids than cereals. Amaranth lipids are rich in unsaturated fatty acids, which are prone to oxidative rancidity. Removal of lipids or defatting of flours may be carried out to enhance product shelf life by preventing undesirable oxidative chain reactions. Therefore, this research was undertaken to see the effects of defatting on the functional properties of amaranth flours. The defatting was a value addition process as it improved the functional properties of the flours. © 2014 Institute of
Eiamwat, Jirawat; Wanlapa, Sorada; Kampruengdet, Sukit
Rambutan seeds were subjected to SC-CO₂ extraction at 35 MPa, 45 °C to obtain defatted rambutan seed flour. Its physicochemical properties before and after treatment with alkali solution using 0.075 N NaOH were investigated. Alkali-treated flour had a significant increment in bulk density, swelling power, water adsorption capacity, emulsion capacity and stability but a reduction in turbidity, solubility and oil absorption capacity. Pasting measurements showed peak viscosity, breakdown, setback and final viscosity increased significantly for the alkali-treated flour, while pasting temperature decreased. The alkaline treatment decreased the least gelation concentration, but increased the apparent viscosity.
Falasifah; Sunarno, Sunarno; Djaelani, Muhammad Anwar; Rahadian, Rully
Quail (Coturnix coturnix) is one of the poultry that developed continuously to meet the needs of animal protein as well as to improve the quality of public health. Aside from meat, quail also produces egg productively. Meanwhile, excessive consumption of quail eggs is known to cause the health problem. Cinnamon (Cinnamomum sp) and (Centella asiatica) are believed to improve health quality but has not known their impact on quail especially on its growth rate. The objective of this research is to determine the effect of cinnamon bark flour and Pegagan leaf to the growth rate of Australia quail. This study used experimental design consisted of 8 treatments with 4 replications, i.e., controls, feeds supplemented with cinnamon bark flour 5%, 10%, pegagan 5%, 10%, cinnamon bark flour: pegagan leaf powder, among others 5 %: 5%, 5%: 10%, and 10%: 5%. The results showed that the combination of cinnamon bark flour: pegagan flour: 5%: 10% produced the highest growth rate of quail. To conclude, the combination of cinnamon bark flour: pegagan with concentration 5%: 10% could increase the growth rate of quail.
Heredia-Sandoval, N G; Calderón de la Barca, A M; Carvajal-Millán, E; Islas-Rubio, A R
Consumers with gluten-related disorders require gluten-free (GF) foods to avoid an immune response. Alternative to the use of non-gluten containing grains to prepare GF bread, the gluten reactivity has been greatly reduced using a proline specific cleavage enzyme, however, the gluten functionality was lost. The aim of this study was to evaluate the effect of adding an amaranth flour blend (AFB) to enzymatically modified wheat-flour proteins on dough functionality and to evaluate the immunoreactivity and acceptability of the prepared bread. First, wheat flour (20% w/v, substrate) was hydrolyzed using 8.4 U mg -1 protein Aspergillus niger prolyl-endopeptidase (AnPEP) for 8 h at 40 °C under constant agitation. Four types of breads were prepared with the same formulation except for the type of flour (14% w.b.): wheat flour (WF), WF-AFB unmodified not incubated, WF-AFB unmodified incubated and WF-AFB modified. The protein composition and free thiols were analyzed before and after amaranth addition, and the flour and bread proteins were run using SDS-PAGE and immune-detected in blots with IgA from celiac disease patients. The immunoreactive gluten content, specific volume and bread acceptability were evaluated. The polymeric proteins and free thiol groups of WF decreased after AnPEP treatment. The electrophoretic patterns of the modified flour and bread proteins were different and the IgA-immunodetection in blots was highly reduced, particularly for the higher molecular weight subunits. The addition of AFB to the modified wheat flour prepared using AnPEP improved the dough functionality by increasing the thiol groups and allowed the preparation of a sensorially acceptable bread with only 60 mg kg -1 immunoreactive gluten.
Coleman, Jennifer; Abaye, A O; Barbeau, William; Thomason, Wade
A niche market in alternative foods has emerged in response to interest in a health conscientious diet. The purpose of this study was to evaluate the baking characteristics of teff to determine whether teff could produce satisfactory baked products. Cakes, cookies, biscuits and bread were made in triplicate from composites of wheat flour with 0, 10, 20, 30, 40 and 100% teff flour. Objective tests on size, shape, color and texture were used to evaluate the quality of the baked products. Increases in percent teff resulted in decreases in bread and cake volume (p > 0.05). The fracture strength of the cookies were not significantly different (p > 0.05) but spread was significantly greater for cookies made with 40% and 100% teff flour (p ≤ 0.05). There was also significant difference (p ≤ 0.05) in biscuit height and color among teff treatments. Overall, this study showed that teff flour is best suited for use in cookies and biscuits.
Kim, Seung-Hyun; Hur, Gyu-Young; Jin, Hyun Jung; Choi, Hyunna
Lower respiratory symptoms in bakery workers may be induced by wheat flour and endotoxins. We hypothesized that endotoxins from wheat flour may stimulate innate immunity and that interleukin-18 (IL-18) gene polymorphisms may affect their regulatory role in innate immune responses to endotoxins. To investigate the genetic contribution of IL-18 to sensitization to wheat flour, we performed a genetic association study of IL-18 in Korean bakery workers. A total of 373 bakery workers undertook a questionnaire regarding work-related symptoms. Skin prick tests with common and occupational allergens were performed and specific antibodies to wheat flour were measured by ELISA. Three polymorphisms of the IL-18 gene (-607A/C, -137G/C, 8674C/G) were genotyped, and the functional effects of the polymorphisms were analyzed using the luciferase reporter assay. Genotypes of -137G/C (GC or CC) and haplotype ht3 [ACC] showed a significant association with the rate of sensitization to wheat flour. Luciferase activity assay indicated ht3 [AC] as a low transcript haplotype. In conclusion, the regulatory role of IL-18 in lipopolysaccharide-induced responses in bakery workers may be affected by this polymorphism, thus contributing to the development of sensitization to wheat flour and work-related respiratory symptoms. PMID:22468101
Paula Cardoso, A; Ernesto, Mario; Nicala, Domingos; Mirione, Estevao; Chavane, Leonardo; N'zwalo, Hipolito; Chikumba, Sergio; Cliff, Julie; Paulo Mabota, A; Rezaul Haque, M; Howard Bradbury, J
The maximum daily cassava flour intake of children may be calculated from determination of the total cyanide content of cassava flour and urinary thiocyanate levels of school children in samples collected at the same time and place. Four sites, two with and two without recent konzo cases, were chosen for study. In two sites with recent konzo cases, 84% and 93% of school children consumed cassava the previous day, and the calculated maximum daily consumption of cassava was over 700 g. In two sites without recent konzo cases, about 50% of school children consumed cassava the previous day and the calculated daily consumption of cassava flour was less than 150 g. By measurements of cyanide in flour and urinary thiocyanate we are therefore able to distinguish between communities whose diet is almost totally reliant on cassava, and who are therefore susceptible to konzo, and those who have a broader diet and are free from konzo. In another calculation it is shown that 4-23% of the essential S-containing amino acids in the cassava flour consumed by children is used up to detoxify and flour cyanide to thiocyanate. This depletion of methionine and cystine may leads to protein deficiency and may contribute to onset of konzo.
... 7 Agriculture 5 2010-01-01 2010-01-01 false Compensation for grain storage facilities, flour... DOMESTIC QUARANTINE NOTICES Karnal Bunt § 301.89-16 Compensation for grain storage facilities, flour... the 1999-2000 and subsequent crop seasons. Owners of grain storage facilities, flour millers, and...
Pretheep-Kumar, P.; Mohan, S.; Ramaraju, K.
Studies were conducted to evaluate the effect of a protein-enriched pea (Pisum sativum var. Bonneville) flour extract against the rice weevil, Sitophilus oryzae in its repellency, toxicity, effect on fecundity, stability and sensory properties. Milled rice admixed with pea flour extract at 1% concentration significantly repelled S. oryzae. Mortality of S. oryzae was found to increase and fecundity was markedly suppressed, in rice treated with 1% pea flour extract. The toxicity and reproductive effects of the pea protein-enriched rice were found to be stable for a period of 5 months. The sensory characteristics of stored rice when eaten were not affected by the treatment with pea flour extract. This study indicates that the protein-enriched flour extract obtained from the Bonneville pea may be feasible to protect stored milled rice from insect attack. PMID:15861241
Guo, Xiao-Xi; Hu, Wei; Liu, Yuan; Sun, Su-Qin; Gu, Dong-Chen; He, Helen; Xu, Chang-Hua; Wang, Xi-Chang
BPO is often added to wheat flour as flour improver, but its excessive use and edibility are receiving increasing concern. A multi-step IR macro-fingerprinting was employed to identify BPO in wheat flour and unveil its changes during storage. BPO contained in wheat flour (<3.0 mg/kg) was difficult to be identified by infrared spectra with correlation coefficients between wheat flour and wheat flour samples contained BPO all close to 0.98. By applying second derivative spectroscopy, obvious differences among wheat flour and wheat flour contained BPO before and after storage in the range of 1500-1400 cm(-1) were disclosed. The peak of 1450 cm(-1) which belonged to BPO was blue shifted to 1453 cm(-1) (1455) which belonged to benzoic acid after one week of storage, indicating that BPO changed into benzoic acid after storage. Moreover, when using two-dimensional correlation infrared spectroscopy (2DCOS-IR) to track changes of BPO in wheat flour (0.05 mg/g) within one week, intensities of auto-peaks at 1781 cm(-1) and 669 cm(-1) which belonged to BPO and benzoic acid, respectively, were changing inversely, indicating that BPO was decomposed into benzoic acid. Moreover, another autopeak at 1767 cm(-1) which does not belong to benzoic acid was also rising simultaneously. By heating perturbation treatment of BPO in wheat flour based on 2DCOS-IR and spectral subtraction analysis, it was found that BPO in wheat flour not only decomposed into benzoic acid and benzoate, but also produced other deleterious substances, e.g., benzene. This study offers a promising method with minimum pretreatment and time-saving to identify BPO in wheat flour and its chemical products during storage in a holistic manner. Copyright © 2015 Elsevier B.V. All rights reserved.
Sharma, Bharati; Gujral, Hardeep Singh; Solah, Vicky
Wheat and finger millet flour (two cultivars) were blended in the ratio (3:1) to form a composite flour and its dough properties were studied on the mixolab. The chapatti making and digestibility behavior of the composite flour was also investigated. The wheat finger millet (WFM) flour blend displayed up to 30.7% higher total phenolic content (TPC), 38.2% higher total flavonoid content (TFC) and 75.4% higher antioxidant activity (AOA) than the wheat flour. Chapattis prepared from the composite blends exhibited lower retrogradation as evident by the mixolab retrogradation index, higher values of soluble starch and soluble amylose in stored chapatti. The slowly digestible starch (SDS) correlated positively (R=0.816, p<0.05) with TPC and water absorption correlated positively (R=0.995, p<0.05) with damage starch content. The chapattis made from the composite flour had higher SDS and resistant starch (RS) values demonstrating potential as a food with functional characteristics. Copyright © 2017 Elsevier Ltd. All rights reserved.
Lao, Wan-li; Li, Gai-yun; Zhou, Qun; Qin, Te-fu
The ratio of wood and plastic in Wood Plastic Composites (WPCss) influences quality and price, but traditional thermochemical methods cannot rapidly and accurately quantify the ratio of wood/PP in WPCss. This paper was addressed to investigate the feasibility of quantifying the wood flour content and plastic content in WPCss by Fourier Transform Infrared (FTIR) spectroscopy. With Chinese fir, polypropylene (PP) and other additives as raw materials, 13 WPCs samples with different wood flour contents, ranging from 9.8% to 61.5%, were prepared by modifying wood flour, mixing materials and extrusion pelletizing. The samples were analyzed by FTIR with the KBr pellets technique. The absorption peaks of WPCss at 1059, 1 033 and 1 740 cm(-1) are considered as characteristic of Chinese fir, and the absorption peaks at 1 377, 2 839 and 841 cm(-1) are typical of PP by comparing the spectra of WPCss with that of Chinese fir, PP and other additives. The relationship between the wood flour content, PP content in WPCss and their characteristic IR peaks height ratio was established. The results show that there is a strong linear correlation between the wood flour content in WPCss and I1 059/l 1 377/I1 033, /I1377, R2 are 0.992 and 0.993 respectively; there is a high linear correlation between the PP content in WPCss and I1 377/I1 740, I2 839 /I1 740 R2 are 0.985 and 0.981, respectively. Quantitative methods of the wood flour content and PP content in WPCss by FTIR were developed, the predictive equations of the wood flour content in WPCss are y = 53.297x-9. 107 and y = 55.922x-10.238, the predictive equations of the PP content in WPCss are y = 6.828 5x+5.403 6 and y = 8.719 7x+3.295 8. The results of the accuracy test and precision test show that the method has strong repeatability and high accuracy. The average prediction relative deviations of the wood flour content and PP content in WPCss are about 5%. The prediction accuracy has been improved remarkably, compared to
Tribolium confusum (confused flour beetle) is a stored-product pest which contaminates a wide range of food products, from flour and cereals to spices. The insect reduces food quality and is responsible for large economic losses every year. Although a number of methods for detection of stored-produc...
Gajula, H; Alavi, S; Adhikari, K; Herald, T
The effect of precooking by extrusion processing on the dietary fiber profile of wheat flour substituted with 0%, 10%, 20%, and 30% wheat bran was evaluated. Depending on the level of bran, total dietary fiber (TDF) and soluble dietary fiber (SDF) in uncooked flours ranged from 4.2% to 17.2% and 1.5% to 2.4%, respectively. Precooking by extrusion significantly increased SDF in flours (by 22% to 73%); although in most cases it also led to a significant decrease in TDF. Cookies and tortillas produced from uncooked and precooked flours with 0% and 20% substituted bran were evaluated for consumer acceptability using a 9-point hedonic scale. With a few exceptions, all cookies had scores ranging from 6 to 7 ("like slightly" to "like moderately") for each attribute, including overall acceptability, appearance, texture, crumbliness, and flavor. Tortillas were rated for the same attributes except for crumbliness, which was replaced with chewiness. In most cases, tortilla scores ranged from 5 to 7 ("neither like nor dislike" to "like moderately"). Consumer acceptability scores of cookies from uncooked flour did not change significantly with increase in bran substitution from 0% to 20%. However, consumer scores for tortillas did decrease significantly with increase in bran level. Extrusion precooking of the flours did not improve the consumer acceptability of cookies and tortillas; however, it did improve their dietary fiber profile by increasing the SDF significantly.
Giuberti, Gianluca; Gallo, Antonio; Cerioli, Carla; Fortunati, Paola; Masoero, Francesco
The use of rice/leguminous blend may be nutritionally convenient in gluten free product manufacturing. Gluten free spaghetti was prepared with rice flour and different concentrations of bean flour (included at levels of 0%, 20% and 40%, w/w) derived from a new developed white-seeded low phytic acid and lectin free (ws+lpa+lf) bean cultivar. Protein, ash and dietary fibre contents increased linearly (P<0.05) while total starch decreased quadratically (P<0.05) with the inclusion of ws+lpa+lf bean flour. The colour of spaghetti was influenced (P<0.05) by ws+lpa+lf bean inclusion. With respect to 0% spaghetti, the inclusion of ws+lpa+lf bean increased linearly (P<0.05) the optimal cooking time and the water absorption capacity, without affecting cooking loss and texture properties. The ws+lpa+lf bean inclusion increases quadratically (P<0.05) the resistant starch content, while decreasing quadratically (P<0.05) the in vitro glycemic index. The partial replacement of rice flour with bean flour can favourably be used in gluten free spaghetti formulation. Copyright © 2014 Elsevier Ltd. All rights reserved.
Producing fine, good quality rice flour is more difficult than wheat flour because the rice grain is harder. In this study, we analyzed the relationship between the morphology and starch of kernels from genetically different rice varieties that can be used to make dry-milled flour. The non-glutinous...
Sotome, Itaru; Nei, Daisuke; Tsuda, Masuko; Mohammed, Sharif Hossen; Takenaka, Makiko; Okadome, Hiroshi; Isobe, Seiichiro
The decontamination effect of milling by a jet mill was investigated by counting the number of bacteria in brown and white rice flour with mean particle diameters of 3, 20, and 40µm prepared by the jet mill. In the jet mill, the particles are crushed and reduced in size by the mechanical impact caused by their collision. Although the brown and white rice grains were contaminated with approximately 10(6) and 10(5) CFU/g bacteria, the microbial load of the rice flour decreased as the mean particle diameter decreased, ultimately decreasing to approximately 104 and 103 CFU/g in the brown and white rice flour. The temperature and pressure changes of the sample were not considered to have an effect on reducing the bacterial count during the milling. Hence, it was thought that the rice flour was decontaminated by other effects.
Liu, Dunyi; Liu, Yumin; Zhang, Wei; Chen, Xinping; Zou, Chunqin
Zinc (Zn) deficiency is a common disorder of humans in developing countries. The effect of Zn biofortification (via application of six rates of Zn fertilizer to soil) on Zn bioavailability in wheat grain and flour and its impacts on human health was evaluated. Zn bioavailability was estimated with a trivariate model that included Zn homeostasis in the human intestine. As the rate of Zn fertilization increased, the Zn concentration increased in all flour fractions, but the percentages of Zn in standard flour (25%) and bran (75%) relative to total grain Zn were constant. Phytic acid (PA) concentrations in grain and flours were unaffected by Zn biofortification. Zn bioavailability and the health impact, as indicated by disability-adjusted life years (DALYs) saved, increased with the Zn application rate and were greater in standard and refined flour than in whole grain and coarse flour. The biofortified standard and refined flour obtained with application of 50 kg/ha ZnSO4·7H2O met the health requirement (3 mg of Zn obtained from 300 g of wheat flour) and reduced DALYs by >20%. Although Zn biofortification increased Zn bioavailability in standard and refined flour, it did not reduce the bioavailability of iron, manganese, or copper in wheat flour. PMID:28481273
Liu, Dunyi; Liu, Yumin; Zhang, Wei; Chen, Xinping; Zou, Chunqin
Zinc (Zn) deficiency is a common disorder of humans in developing countries. The effect of Zn biofortification (via application of six rates of Zn fertilizer to soil) on Zn bioavailability in wheat grain and flour and its impacts on human health was evaluated. Zn bioavailability was estimated with a trivariate model that included Zn homeostasis in the human intestine. As the rate of Zn fertilization increased, the Zn concentration increased in all flour fractions, but the percentages of Zn in standard flour (25%) and bran (75%) relative to total grain Zn were constant. Phytic acid (PA) concentrations in grain and flours were unaffected by Zn biofortification. Zn bioavailability and the health impact, as indicated by disability-adjusted life years (DALYs) saved, increased with the Zn application rate and were greater in standard and refined flour than in whole grain and coarse flour. The biofortified standard and refined flour obtained with application of 50 kg/ha ZnSO₄·7H₂O met the health requirement (3 mg of Zn obtained from 300 g of wheat flour) and reduced DALYs by >20%. Although Zn biofortification increased Zn bioavailability in standard and refined flour, it did not reduce the bioavailability of iron, manganese, or copper in wheat flour.
Rizzello, Carlo Giuseppe; Cavoski, Ivana; Turk, Jelena; Ercolini, Danilo; Nionelli, Luana; Pontonio, Erica; De Angelis, Maria; De Filippis, Francesca; Gobbetti, Marco
Triticum turgidum subsp. durum was grown according to four farming systems: conventional (CONV), organic with cow manure (OMAN) or green manure (OLEG), and without inputs (NOINPUT). Some chemical and technological characteristics differed between CONV and organic flours. As shown by two-dimensional electrophoresis (2-DE) analysis, OMAN and OLEG flours showed the highest number of gliadins, and OMAN flour also had the highest number of high-molecular-mass glutenins. Type I sourdoughs were prepared at the laboratory level through a back-slopping procedure, and the bacterial ecology during sourdough preparation was described by 16S rRNA gene pyrosequencing. Before fermentation, the dough made with CONV flour showed the highest bacterial diversity. Flours were variously contaminated by genera belonging to the Proteobacteria, Firmicutes, and Actinobacteria. Mature sourdoughs were completely and stably dominated by lactic acid bacteria. The diversity of Firmicutes was the highest for mature sourdoughs made with organic and, especially, NOINPUT flours. Beta diversity analysis based on the weighted UniFrac distance showed differences between doughs and sourdoughs. Those made with CONV flour were separated from the other with organic flours. Lactic acid bacterium microbiota structure was qualitatively confirmed through the culturing method. As shown by PCR-denaturing gradient gel electrophoresis (DGGE) analysis, yeasts belonging to the genera Saccharomyces, Candida, Kazachstania, and Rhodotorula occurred in all sourdoughs. Levels of bound phenolic acids and phytase and antioxidant activities differed depending on the farming system. Mature sourdoughs were used for bread making. Technological characteristics were superior in the breads made with organic sourdoughs. The farming system is another determinant affecting the sourdough microbiota. The organic cultivation of durum wheat was reflected along the flour-sourdough fermentation-bread axis. PMID:25724957
van der Zalm, Elizabeth E J; Grabowska, Katarzyna J; Strubel, Maurice; van der Goot, Atze J; Hamer, Rob J; Boom, Remko M
Recently, it was found that applying curvilinear shear flow in a cone-cone shearing device to wheat flour dough induces separation, resulting in a gluten-enriched fraction in the apex of the cone and gluten-depleted fraction at the outer part. This article describes whether fractionation of the various proteineous components occurs during and after separation of Soissons wheat flour. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and size-exclusion high performance liquid chromatography (SE-HPLC) were found to be suitable techniques for this. It is concluded that all protein fractions migrate to the center of the cone as a result of which the composition of the gluten-enriched fraction remains rather similar to that in the original flour. However, the larger glutenin polymer fraction migrated faster, as a result of which the concentration of large polymers was increased with a factor 2.4 compared to that of Soissons flour. The concentration of monomers in the gluten-enriched fraction was decreased to 70% of the original concentration in the original wheat flour.
Santos, Joana; Alvarez-Ortí, Manuel; Sena-Moreno, Estela; Rabadán, Adrián; Pardo, José E; Beatriz Pp Oliveira, M
Walnut oil extraction by pressure systems produces a press cake as a by-product, with many of the beneficial walnut properties. The objective of this work was to evaluate the composition and antioxidant properties of walnut flours submitted to different roasting protocols (50, 100 and 150 °C during 30, 60 and 120 min). All walnut flours had about 42% protein and a significant amount of dietary fibre (17%), not being affected by the roasting process. Nonetheless, the fat content increased around 50% in walnuts flours subjected to longer and higher roasting temperatures (150 °C). The lipid fraction showed a good nutritional quality with a high vitamin E content (mainly γ-tocopherol) and fatty acid profile rich in linoleic and linolenic acids. The high phenolic content also provides great antioxidant capacity to the flours. Mild roasting of walnuts did not affect the quality of the flours that could be used as a functional ingredient in the food industry. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.
Buckwheat flours (Whole, Farinetta, Supreme, and Fancy) were investigated for their compositions, free and bound phenolic contents, antioxidant activities, and flavonoid contents using spectrophotometer and LC-ESI-IT- MS (LC-MS). Farinetta flour contained the highest oil, protein, and free and boun...
Rinaldi, Massimiliano; Paciulli, Maria; Caligiani, Augusta; Scazzina, Francesca; Chiavaro, Emma
The effect of sourdough fermentation combined with chestnut flour was investigated for improving technological and nutritional quality of gluten-free bread during 5day shelf life by means of chemico-physical and nutritional properties. Sourdough fermentation by itself and with chestnut flour reduced volume of loaves and heterogeneity in crumb grain. Sourdough technology allowed increasing crumb moisture content with no significant variations during shelf-life. Chestnut flour darkened crumb and crust while no effects on colour were observed for sourdough. Sourdough and/or chestnut flour addition caused a significant increase in crumb hardness at time 0 while a significant reduction of staling was observed only at 5days, even if a decrease in amylopectin fusion enthalpy was observed. The percentage of hydrolysed starch during in vitro digestion was significantly reduced by sourdough fermentation with a presumable lower glycaemic index. Copyright © 2016 Elsevier Ltd. All rights reserved.
Rizzello, Carlo Giuseppe; Cavoski, Ivana; Turk, Jelena; Ercolini, Danilo; Nionelli, Luana; Pontonio, Erica; De Angelis, Maria; De Filippis, Francesca; Gobbetti, Marco; Di Cagno, Raffaella
Triticum turgidum subsp. durum was grown according to four farming systems: conventional (CONV), organic with cow manure (OMAN) or green manure (OLEG), and without inputs (NOINPUT). Some chemical and technological characteristics differed between CONV and organic flours. As shown by two-dimensional electrophoresis (2-DE) analysis, OMAN and OLEG flours showed the highest number of gliadins, and OMAN flour also had the highest number of high-molecular-mass glutenins. Type I sourdoughs were prepared at the laboratory level through a back-slopping procedure, and the bacterial ecology during sourdough preparation was described by 16S rRNA gene pyrosequencing. Before fermentation, the dough made with CONV flour showed the highest bacterial diversity. Flours were variously contaminated by genera belonging to the Proteobacteria, Firmicutes, and Actinobacteria. Mature sourdoughs were completely and stably dominated by lactic acid bacteria. The diversity of Firmicutes was the highest for mature sourdoughs made with organic and, especially, NOINPUT flours. Beta diversity analysis based on the weighted UniFrac distance showed differences between doughs and sourdoughs. Those made with CONV flour were separated from the other with organic flours. Lactic acid bacterium microbiota structure was qualitatively confirmed through the culturing method. As shown by PCR-denaturing gradient gel electrophoresis (DGGE) analysis, yeasts belonging to the genera Saccharomyces, Candida, Kazachstania, and Rhodotorula occurred in all sourdoughs. Levels of bound phenolic acids and phytase and antioxidant activities differed depending on the farming system. Mature sourdoughs were used for bread making. Technological characteristics were superior in the breads made with organic sourdoughs. The farming system is another determinant affecting the sourdough microbiota. The organic cultivation of durum wheat was reflected along the flour-sourdough fermentation-bread axis. Copyright © 2015, American
Choi, I-D; Phillips, R D; Resurreccion, A V A
Indirectly puffed snacks were produced by an extrusion process with partially defatted (12% fat) peanut flour (30%, 40%, 50%) at different levels of screw speed (200, 300, 400 rpm) and feed rate (4, 5, 6 kg/h). Extrudates were dried to obtain half-products (11% to 12% MC) followed by puffing with deep-fat frying. The puffed snack prototypes were subjected to consumer acceptance test. Consumers rated higher than 6.0 (= like slightly) for all products produced within the experimental factor ranges on the attributes of crispness and texture, whereas consumer scores for appearance, color, flavor, and overall liking were lower than 6.0 for the product containing 50% peanut flour regardless of screw speed and feed rate. The product extruded with 50% peanut flour at screw speed of 400 rpm and feed rate of 6 kg/h received the lowest score of 5.5 on overall liking in a 9-point hedonic score. Predicted regression models indicated that feed rate had the largest effect on consumer attributes followed by peanut flour and screw speed. From the superimposed contour plot of individual contour plot of consumer attributes, the optimum region was identified as the area beginning at the 42.0% to 43.0% peanut flour and 4.0 kg/h feed rates, rising to a maximum at 45% peanut flour and 4.6 kg/h feed rates and decreasing to the 33.0% to 34.0% peanut flour and 6.0 kg/h feed rates. Verification confirmed the ability of predictive regression models to identify peanut-based snacks, which would be scored higher than 6.0 by consumer evaluation.
Cebi, Nur; Dogan, Canan Ekinci; Develioglu, Ayşen; Yayla, Mediha Esra Altuntop; Sagdic, Osman
l-Cysteine is deliberately added to various flour types since l-Cysteine has enabled favorable baking conditions such as low viscosity, increased elasticity and rise during baking. In Turkey, usage of l-Cysteine as a food additive isn't allowed in wheat flour according to the Turkish Food Codex Regulation on food additives. There is an urgent need for effective methods to detect l-Cysteine in wheat flour. In this study, for the first time, a new, rapid, effective, non-destructive and cost-effective method was developed for detection of l-Cysteine in wheat flour using Raman microscopy. Detection of l-Cysteine in wheat flour was accomplished successfully using Raman microscopy combined chemometrics of PCA (Principal Component Analysis) and HCA (Hierarchical Cluster Analysis). In this work, 500-2000cm -1 spectral range (fingerprint region) was determined to perform PCA and HCA analysis. l-Cysteine and l-Cystine were determined with detection limit of 0.125% (w/w) in different wheat flour samples. Copyright © 2017 Elsevier Ltd. All rights reserved.
Reinforcement effect of cryogenically fractured soy Flour composite filler in soft polymer was investigated in this study. Polymer composites were prepared by melt-mixing polymer and soy flour composite fillers in an internal mixer. Soy flour composite fillers were prepared by blending aqueous dis...
Mir, Shabir Ahmad; Bosco, Sowriappan John Don
Starch and flour of seven temperate rice cultivars grown in Himalayan region were evaluated for composition, granule structure, crystallinity, Raman spectrometry, turbidity, swelling power, solubility, pasting properties and textural properties. The rice cultivars showed medium to high amylose content for starch (24.69-32.76%) and flour (17.78-24.86%). SKAU-382 showed the highest amount of amylose (32.76%). Rice starch showed polyhedral granule shapes and differences in their mean granule size (2.3-6.5 μm) were noted among the samples. The starch and flour samples showed type A-pattern with strong reflection at 15, 18, and 23. Pasting profile and textural analysis of rice starch and flour showed that all the cultivars differences, probably due to variation in amylose content. The present study can be used for identifying differences between rice genotypes for starch and flour quality and could provide guidance to possible industries for their end use. Copyright © 2014 Elsevier Ltd. All rights reserved.
Distantina, Sperisa; Kaavessina, Mujtahid; Fadilah, Putrie, Amellia Setyani; Novianti, Inas
To increase the solubility of porang flour or konjac flour in the water, the konjac flour was modified chemically into carboxymethyl konjac-glucomannan (CM-KGM), so that the utilization of the product may be wider. The aims of this research were to study the effect of ethanol concentration as the solvent media (50% ethanol and 90% ethanol) and temperature (45-50 °C dan 65-70 °C) on the rate of degrees of substitution (DS) formation in carboxymethylation step. CM-KGM was prepared by alkalization of konjac flour using sodium hydroxide for 30 minutes at 30°C. Then, the product of alkalization was carboxymethylated using sodium monochloroacetic (Na-MCA) with ratio 1:1 gram flour/NA-MCA. Based on the experimental results, the higher DS was attained by carboxymethylation using media solvent of 90% ethanol and temperature carboxymethylation 65-70°C. The relationship between temperature and reaction constant (k) follows: k = 0.3082 exp ((-15,277)/(8.314 T)).
Jongsutjarittam, Nisachon; Charoenrein, Sanguansri
This study aimed to improve the freeze-thawed cake properties by10-20% waxy rice flour (WRF) substitution for wheat flour (WF). Viscosity of WRF-substituted batters was lower; consequently, trapped air was less uniformly distributed than WF batter. After five freeze-thaw cycles, firmness and enthalpy of melting retrograded amylopectin of WF- and WRF-substituted cakes increased and the matrix surrounding the air pores from SEM images was denser than in fresh-baked cakes. Sensory evaluation showed an increase in firmness and a decrease in firmness acceptability of freeze-thawed cakes. However, freeze-thawed cake with WRF substitution had significantly less firmness, less dense matrix and more acceptability than WF cake. This could have been due to a low amylose content of WRF and the spread of ruptured waxy rice starch granules around swollen wheat starch granules as observed by CLSM. Thus, WRF could be used for WF substitution to improve the firmness in freeze-thawed cake. Copyright © 2013 Elsevier Ltd. All rights reserved.
Wood-plastic composites are being examined for a greater number of structural-type applications that may be exposed to different environments, some of them adverse. This paper discusses the influence of moisture absorption on the mechanical proper-ties of wood flour-polypropylene composites. Composites filled with 20% or 40% wood flour (by weight) were placed in...
Rosenbaum, J. G.; Dean, W. E.; Colman, S. M.; Reynolds, R. L.
Variations in magnetic properties within an interval of Bear Lake sediments correlative with oxygen isotope stage 2 (OIS 2) and OIS 3 provide a record of glacial flour production for the Uinta Mountains. Like sediments of the same age from Upper Klamath Lake (OR), these Bear Lake sediments have high magnetic susceptibilities (MS) relative to non-glacial-age sediments and contain well-defined millennial-scale variations in magnetic properties. In contrast to glacial flour derived from volcanic rocks surrounding Upper Klamath Lake, glacial flour derived from the Uinta Mountains and deposited in Bear Lake by the Bear River has low magnetite content but high hematite content. The relatively low MS values of younger and older non-glacial-age sediments are due entirely to dilution by non-magnetic endogenic carbonate and to the effects of sulfidic alteration of detrital Fe-oxides. Analysis of samples from streams entering Bear Lake and from along the course of the Bear River demonstrates that, in comparison to other areas of the catchment, sediment derived from the Uinta Mountains is rich in hematite (high HIRM) and aluminum, and poor in magnetite (low MS) and titanium. Within the glacial-age lake sediments, there are strong positive correlations among HIRM, Al/Ti, and fine sediment grain size. MS varies inversely with theses three variables. These relations indicate that the observed millennial-scale variations in magnetic and chemical properties arise from varying proportions of two detrital components: (1) very fine-grained glacial flour derived from Proterozoic metasedimentary rocks in the Uinta Mountains and characterized by high HIRM and low MS, and (2) somewhat coarser material, characterized by higher MS and lower HIRM, derived from widespread sedimentary rocks along the course of the Bear River and around Bear Lake. Measurement of glacial flour incorporated in lake sediments can provide a continuous history of alpine glaciation, because the rate of accumulation
Bahrami, Niloufar; Bayliss, Danny; Chope, Gemma; Penson, Simon; Perehinec, Tania; Fisk, Ian D.
Atmospheric pressure cold plasma has the potential to modify biological chemistry and modulate physical surface properties. Wheat flour was treated by low levels of cold plasma (air, 15 V and 20 V) for 60 or 120 s. There was no change in the total aerobic bacterial count or total mould count as a result of treatment. Treatment did not impact the concentration of total non-starch lipids, or non-polar and glycolipids. However, treatment did reduce total free fatty acids and phospholipids and was dose dependent. Oxidation markers (hydroperoxide value and head space n-hexanal) increased with treatment time and voltage, which confirmed the acceleration of lipid oxidation. Total proteins were not significantly influenced by treatment although there was a trend towards higher molecular weight fractions which indicated protein oxidation and treated flour did produce a stronger dough. This study confirms the potential of cold plasma as a tool to modify flour functionality. PMID:26920291
Paramita, Octavianti; Wahyuningsih, Ansori, Muhammad
This study was aimed at improving the physicochemical quality of elephant foot yam flour in Gunungpati, Semarang by acid modification. The utilization of elephant foot yam flour in several processed food was also discussed in this study. The flour of the experimental result discussed in this study was expected to become a reference for the manufacturers of elephant foot yam flour and its processed food in Gunungpati. This study modified the elephant foot yam flour using acid modification method. The physical and chemical quality of each elephant foot yam flour of the experimental result sample were assessed using proximate analysis. The resulting tuber flour weighed 50 grams and the soaked in acid solution with various concentrations 5 %, 10 % and 15 % with soaking duration 30, 60 and 90 minutes at temperature 35 °C. The resulting suspension was washed 3 times, filtered and then dried by cabinet dryer using 46 °C for 2 days. The dried flour was sifted with a 80 mesh sieve. Chemical test was conducted after elephant foot yam was acid modification to determine changes in the quality flour: test levels of protein, fat, crude fiber content, moisture content, ash content and starch content. In addition, color tests and granular test on elephant foot yam flour were also conducted. The acid modification as chemical treatment on elephant foot yam flour in this study was able to change the functional properties of elephant foot yam flour towards a better processing characterized by a brighter color (L = 80, a = 8 and b = 12), the hydrolysis of polysaccharides flour into shorter chain (flour content decreased to 72%), the expansion of granules in elephant foot yam resulting in a process - ready flour, and better monolayer water content of 11%. The content of protein and fiber on the elephant foot yam flour also can be maintained at a level of 8% and 1.9% levels.
Kido, Miyuki; Kobayashi, Kaneto; Chino, Shuji; Nishiwaki, Toshikazu; Homma, Noriyuki; Hayashi, Mayumi; Yamamoto, Kazutaka; Shigematsu, Toru
In response to the recent expansion of rice-flour use, we established a new rice-flour manufacturing process through the application of high hydrostatic pressure (HP) to the enzyme-treated milling method. HP improved both the activity of pectinase, which is used in the enzyme-treated milling method and the water absorption capacity of rice grains. These results indicate improved damage to the tissue structures of rice grains. In contrast, HP suppressed the increase in glucose, which may have led to less starch damage. The manufacturing process was optimized to HP treatment at 200 MPa (40°C) for 1 h and subsequent wet-pulverization at 11,000 rpm. Using this process, rice flour with an exclusively fine mean particle size less than 20 μm and starch damage less than 5% was obtained from rice grains soaked in an enzyme solution and distilled water. This super-fine rice flour is suitable for bread, pasta, noodles and Western-style sweets.
Corn starch, corn flour, and corn stover biochar were evaluated as potential renewable substitutes for carbon black as filler in rubber composites using carboxylated styrene-butadiene as the rubber matrix. Previous work has shown that starch-based fillers have very good reinforcement properties at t...
Abebe, Workineh; Collar, Concha; Ronda, Felicidad
Tef grain is becoming very attractive in the Western countries since it is a gluten-free grain with appreciated nutritional advantages. However there is little information of its functional properties and starch digestibility and how they are affected by variety type and particle size distribution. This work evaluates the effect of the grain variety and the mill used on tef flour physico-chemical and functional properties, mainly derived from starch behavior. In vitro starch digestibility of the flours by Englyst method was assessed. Two types of mills were used to obtain whole flours of different granulation. Rice and wheat flours were analyzed as references. Protein molecular weight distribution and flour structure by SEM were also analyzed to justify some of the differences found among the cereals studied. Tef cultivar and mill type exhibited important effect on granulation, bulking density and starch damage, affecting the processing performance of the flours and determining the hydration and pasting properties. The color was darker although one of the white varieties had a lightness near the reference flours. Different granulation of tef flour induced different in vitro starch digestibility. The disc attrition mill led to higher starch digestibility rate index and rapidly available glucose, probably as consequence of a higher damaged starch content. The results confirm the adequacy of tef flour as ingredient in the formulation of new cereal based foods and the importance of the variety and the mill on its functional properties. Copyright © 2014 Elsevier Ltd. All rights reserved.
Buckman, Evelyn S; Oduro, Ibok; Plahar, Wisdom A; Tortoe, Charles
Many plant species that are suitable for food across the world are neglected and underutilized. In order to increase their diversified food uses and thus help enhance food and nutrition security, we studied the chemical and functional properties of Pachyrhizus erosus (yam bean), which is a neglected and underutilized legume species. The chemical properties of flour produced from the yam bean include 5.8% moisture content, 5.7% crude fat, 6.2% crude fiber, and 85% available carbohydrate, indicating appropriate shelf-stable flour, low fat, and abundant energy. The results also showed a reducing sugar content of 2.0% and 21.0% starch. Pasting temperature was 70.6°C with peak viscosity of 14.5 BU, which supports ease of cooking of the flour. The swelling power obtained was 752.9 g/100 g at 85°C with a solubility index of 54%. Water holding capacity (WHC) obtained for the flour was 363.88%, whereas swelling volume was 14.0 ml and makes the flour appropriate for the production of infant foods. The P. erosus flour therefore exhibits good functional and chemical properties that would make the flour quite suitable as a substitute for other flours in food systems.
Hashim, N; Pongjata, J
The objective of this study was to identify the effect of different drying methods on vitamin A activity of formulated weaning food. Weaned foods on vitamin A activity of formulated using treated cowpea flour, locally available rice flour, banana-pumpkin, skim milk powder and sugar in the ratio 35:35:15:15:5. Treated cowpea flour consisted of original cowpea flour, 24 h germinated cowpea flour. Each treated flour was mixed separately with the other ingredients and cooked into a slurry. Each mixture was either oven-dried or freeze-dried to produce a dry flaky mixture. The carotenoid composition of the product was determined by HPLC. Vitamin A activity of oven-dried weaning food was significantly reduced (p<0.05) compared to freeze-dried weaning food. The freeze-dried weaning foods showed a higher retinol equivalent than oven-dried weaning foods for all treatments. The results of the study found that an intake of 100 g of freeze-dried weaning foods enriched with banana-pumpkin and cowpea flour provided an adequate amount of the recommended daily allowance (RDA) of vitamin A for infants.
Flores-Fernández, José Miguel; Barragán-Álvarez, Carla Patricia; Díaz-Martínez, Nestor Emmanuel; Villanueva-Rodríguez, Socorro; Padilla-Camberos, Eduardo
Previous studies of Citrus spp. peel have shown hypoglycemic and antioxidant activities. Citrus limetta has been studied for its therapeutic properties. Diabetes mellitus (DM) is a health problem in Mexico and worldwide, that takes a vital importance due to its high incidence. Recently, scientists have searched natural sources to control the disease. In this study, we evaluated the in vitro hypoglycemic activity and in vivo postprandial glycemic effect of C. limetta peel flour by glucose adsorption and retardation assays as well as postprandial serum glucose levels using a group of female Balb-c mice, respectively. C. limetta peel flour showed a glucose adsorption capacity of 16.58 mM, having a similar effect regarding the positive control. The glucose diffusion in the dialysate was elevated, with a glucose dialysis retardation index of 33.79% in a period of 3 h, showing similar results to positive control. Postprandial serum glucose levels in the animal group treated with C. limetta peel flour showed a glucose level of 41.4 mg/dL, being this value significantly lower than negative control group and similar to positive control. Toxicity tests showed good tolerance to the dose of 2000 mg/kg. C. limetta peel flour could act as a source of functional compounds for the control of DM. Citrus limetta peel flour showed a glucose adsorption capacity similar to the positive controlThe glucose diffusion in the dialysate was elevated, showing similar results to positive controlPostprandial serum glucose levels in the animal group treated with C. limetta peel flour showed a glucose level significantly lower than negative control group and similar to positive controlToxicity tests showed good tolerance C. limetta peel flour could act as a source of functional compounds for the control of diabetes mellitus. Abbreviations used: CIATEJ: Center for Research and Assistance in Technology and Design of Jalisco; DM: Diabetes mellitus; FGC: Final glucose concentration; GDRI: Glucose
Flores-Fernández, José Miguel; Barragán-Álvarez, Carla Patricia; Díaz-Martínez, Nestor Emmanuel; Villanueva-Rodríguez, Socorro; Padilla-Camberos, Eduardo
Background: Previous studies of Citrus spp. peel have shown hypoglycemic and antioxidant activities. Citrus limetta has been studied for its therapeutic properties. Diabetes mellitus (DM) is a health problem in Mexico and worldwide, that takes a vital importance due to its high incidence. Recently, scientists have searched natural sources to control the disease. Materials and Methods: In this study, we evaluated the in vitro hypoglycemic activity and in vivo postprandial glycemic effect of C. limetta peel flour by glucose adsorption and retardation assays as well as postprandial serum glucose levels using a group of female Balb-c mice, respectively. Results: C. limetta peel flour showed a glucose adsorption capacity of 16.58 mM, having a similar effect regarding the positive control. The glucose diffusion in the dialysate was elevated, with a glucose dialysis retardation index of 33.79% in a period of 3 h, showing similar results to positive control. Postprandial serum glucose levels in the animal group treated with C. limetta peel flour showed a glucose level of 41.4 mg/dL, being this value significantly lower than negative control group and similar to positive control. Toxicity tests showed good tolerance to the dose of 2000 mg/kg. Conclusion: C. limetta peel flour could act as a source of functional compounds for the control of DM. SUMMARY Citrus limetta peel flour showed a glucose adsorption capacity similar to the positive controlThe glucose diffusion in the dialysate was elevated, showing similar results to positive controlPostprandial serum glucose levels in the animal group treated with C. limetta peel flour showed a glucose level significantly lower than negative control group and similar to positive controlToxicity tests showed good toleranceC. limetta peel flour could act as a source of functional compounds for the control of diabetes mellitus. Abbreviations used: CIATEJ: Center for Research and Assistance in Technology and Design of Jalisco; DM
Chinma, Chiemela Enyinnaya; Anuonye, Julian Chukwuemeka; Simon, Omotade Comfort; Ohiare, Raliat Ozavize; Danbaba, Nahemiah
This study determined the effect of germination (48 h) on the physicochemical and antioxidant characteristics of rice flour from three rice varieties from Nigeria. Local rice varieties (Jamila, Jeep and Kwandala) were evaluated and compared to an improved variety (MR 219). Physicochemical and antioxidant properties of flours were determined using standard methods. Protein, magnesium, phosphorus, potassium and antioxidant properties of rice flours increased after germination while phytic acid and total starch contents decreased. Foaming capacity and stability of rice flours increased after germination. Germination resulted to changes in pasting and thermal characteristics of rice flours. Germinated rice flours had better physicochemical and antioxidant properties with reduced phytic acid and starch contents compared to MR 219, which can be utilized as functional ingredients in the preparation of rice-based products. Copyright © 2015 Elsevier Ltd. All rights reserved.
Yan, Han; Bai, Bing; Cheng, Xiao-Xiao; Li, Guang-Chun; Huang, Shi-Chen; Piao, Chun-Xiang
The effects of corn stover fermentation with the Bacillus megaterium MYB3 was studied in this paper. The results showed that the decomposition rates of cellulose and hemicellulose were 49.6%, 43.46% after 20 days respectively, after fermentation, pH was changed to 5.68, and adjusted to corn stover initial pH 3 to achieve the purpose of sterilization. The decomposition rate was significantly increased by adding corn flour. After adjusting fermentation composes with the ratio of the corn stove to corn flour was 15 : 1, the decomposition rate of cellulose would be 52.37% for 10 days.
Utami, Rohmah Fitri; Praseptiangga, Danar; Affandi, Dian Rachmawanti; Atmaka, Windi
Wheat flour consumption in Indonesia increases annually and this condition may threaten the national food security. Moreover, excessive wheat flour consumption also has some negative health effects due to gluten. On the other side, Indonesia is rich in local food sources that have potential to be developed and national food security can be strengthen. Flour production is one of the best alternative ways to be selected as the downstream stage of the tubers and legumes utilization. Yam and lima beans are examples of Indonesian tubers and legumes that could be developed as materials for composite flour production. The objective of this study is to determine the best formula of composite flour from yam and lima beans based on their physicochemical characteristics. Physical and chemical analyses were conducted and completely randomized design was used. Three different formulations were developed. The ratio of yam flour and lima beans flour, which were 85:15 (F1), 70:30 (F2), 55:45 (F3) respectively, were formulated to produce composite flour. The results showed that F1 demonstrated the highest level in oil holding capacity (1.168 ± 0.009 g/g), water absorption (75.553 ± 0.139%), mineral (ash content) (4.054 ± 0.019%), carbohydrate (76.369 ± 0.094%), amylose (29.824 ± 0.003%), antioxidant activity (69.650 ± 0.705%) and total phenolic compound (1.326 ± 0.002%). On the other hand, F2 have the highest starch content (71.772 ± 0.170%) and amylopectin content (42.136 ± 0.175%). While F3 has the brightest color of composite flour (oHue=78.434 ± 0.123), the highest level of swelling ower (7.228 ± 0.127 g/g), water holding capacity (2.293 ± 0.000 g/g), highest protein content (12.928 ± 0.052%), fat (0.782 ± 0.001%), dietary fiber (12.942 ± 0.109%) and resistant starch (17.591 ± 0.111%) respectively. The highest effectiveness index of three formulas was further evaluated by De Garmo analysis. F1 showed the highest effectiveness index (0.533) among three formulas
Ferreira, Mariana S L; Santos, Mônica C P; Moro, Thaísa M A; Basto, Gabriela J; Andrade, Roberta M S; Gonçalves, Édira C B A
Fruits and vegetables are extensively processed and the residues are often discarded. However, due to their rich composition, they could be used to minimize food waste. This study aimed to develop food products based on the solid residue generated from the manufacture of an isotonic beverage. This beverage was produced based on integral exploitation of several fruits and vegetables: orange, passion fruit, watermelon, lettuce, courgette, carrot, spinach, mint, taro, cucumber and rocket. The remaining residue was processed into flour and its functional properties were evaluated. The fruit and vegetable residue (FVR) flour was incorporated with different levels (20 to 35 %) into biscuits and cereal bars. The proximate composition, microbiological stability until 90 days and consumer acceptance were analyzed. The FVR flour presented a higher water holding capacity than oil holding capacity, respectively 7.43 and 1.91 g g(-1) of flour, probably associated with its high levels of carbohydrates (53 %) and fibres (21.5 %). Biscuits enriched with 35 % of FVR flour presented significantly higher fibre, ranging from 57 % to 118 % and mineral contents, from 25 % to 37 % than when only 20 % was added. Cereal bars presented about 75 % of fibres and variable mineral contents between 14 % and 37 %. The incorporation of FVR did not change the fat content. The microbiological examinations are within acceptable limits according to international regulation. The incorporation of FVR flour did not impair consumer acceptance, the sensory attributes averaged around 6. The chemical, microbiological and sensorial results of the designed products attested for an alternative towards applying and reducing agro-industrial wastes.
The Effects of Treatments on Batu Banana Flour and Percentage of Wheat Substitution on The Resistant Starch, In Vitro Starch Digestibility Content and Palatability of Cookies Made with Banana (Musa balbisiana Colla) Flour
Ratnasari, D.; Rustanti, N.; Arifan, F.; Afifah, DN
Diabetes mellitus (DM) is the most common endocrine disease worldwide. Resistant starch is polysaccharide that is recommended for DM patient diets. One of the staple crops containing resistant starch is banana. It is the fourth most important staple crop in the world and critical for food security, best suited plant in warm, frost-free, and coastal climates area. Among banana varieties, Batu bananas (Musa balbisiana Colla) had the highest content of resistant starch (~39%), but its use as a food ingredient is limited. Inclusion of Batu banana flour into cookies manufacturing would both increase the economic value of Batu bananas and provide alternative snacks for DM patients. Here we sought to examine whether cookies made with modified Batu banana flour would be a suitable snack for DM patients. This study used a completely randomized design with two factors: substitution of Batu banana flour (25%, 50%,75%) for wheat-based flour and Batu banana flour treatment methods (no treatment, autoclaving-cooling, autoclaving-cooling-spontaneous fermentation). The resistant starch and in vitro starch digestibility levels were analyzed using two-way ANOVA and Tukey test, whereas the acceptance level was analyzed by Friedman and Wilcoxon tests. The content of resistant starch and in vitro starch digestibility of the different treatments ranged from 3.10 to 15.79% and 16.03 to 52.59%, respectively. Both factors differed significantly (p<0.05) with respect to Batu banana flour substitution, but not to processing method (p>0.05). Meanwhile, palatability in terms of color, aroma, texture, and flavor differed significantly among the different treatments and starch contents (p<0.05). Together these results show that Batu banana flour could be a promising ingredient for the production of snacks suitable for consumption by DM patients. Keywords: Batu banana, cookies, resistant starch, in vitro starch digestibility
Ramli, Saifullah; Alkarkhi, Abbas F M; Shin Yong, Yeoh; Min-Tze, Liong; Easa, Azhar Mat
The present study describes the utilization of banana--Cavendish (Musa acuminata L., cv cavendshii) and Dream (Musa acuminata colla. AAA, cv 'Berangan')--pulp and peel flours as functional ingredients in yellow alkaline noodles. Noodles were prepared by partial substitution of wheat flour with ripe banana pulp or peel flours. In most cases, the starch hydrolysis index, predicted glycaemic index (pGI) and physicochemical properties of cooked noodles were affected by banana flour addition. In general, the pGI values of cooked noodles were in the order; banana peel noodles < banana pulp noodles < control noodles. Since the peel flour was higher in total dietary fibre but lower in resistant starch contents than the pulp flour, the low pGI of banana peel noodles was mainly due to its high dietary fibre content. In conclusion, banana pulp and peel flour could be useful for controlling starch hydrolysis of yellow noodles, even though some physicochemical properties of the noodles were altered.
Sebecić, Blazenka; Vedrina-Dragojević, Irena
Cereal-based confectionery products being consumed through whole human life are considered mainly to be a source of carbohydrates, that is energy, although cereals are a rich source of minerals as well. To evaluate some hard biscuits produced in Croatia as a source of different trace elements in nutrition, in this study Zn and Cu contents were determined in classic wheat flour biscuits and in dietetic biscuits enriched with whole wheat grain flour or whole wheat grain grits, soya flour and skimmed milk. Zn was determined by flame atomic absorption spectrometry (AAS); Cu was determined by inductively coupled plasma atomic emission spectroscopy (ICP-AES). The results show that the Zn content in different kinds of biscuits ranges from 5.89 up to 17.64 mg/kg and the Cu content ranges from 1.15 up to 2.79 mg/kg depending on the type of wheat milling products and mineral content of other ingredients used. Enriched dietetic biscuits produced from wheat flour type 850 and whole wheat grain flour and/or soya flour and skimmed milk were almost 200% and 150% higher in Zn and Cu, respectively, in comparison to classic white wheat flour biscuits and can be considered as good sources of Zn and Cu in nutrition.
Haslinda, W H; Cheng, L H; Chong, L C; Noor Aziah, A A
Flour was prepared from peeled and unpeeled banana Awak ABB. Samples prepared were subjected to analysis for determination of chemical composition, mineral, dietary fibre, starch and total phenolics content, antioxidant activity and pasting properties. In general, flour prepared from unpeeled banana was found to show enhanced nutrition values with higher contents of mineral, dietary fibre and total phenolics. Hence, flour fortified with peel showed relatively higher antioxidant activity. On the other hand, better pasting properties were shown when banana flour was blended with peel. It was found that a relatively lower pasting temperature, peak viscosity, breakdown, final viscosity and setback were evident in a sample blended with peel.
Ventorino, Valeria; Cavella, Silvana; Fagnano, Massimo; Brugno, Rachele
In the last few years the need to produce food with added value has fueled the search for new ingredients and health-promoting compounds. In particular, to improve the quality of bakery products with distinct nutritional properties, the identification of new raw materials, appropriate technologies, and specific microbial strains is necessary. In this study, different doughs were prepared, with 10% and 20% flour from immature wheat grain blended with type “0 America” wheat flour. Immature flour was obtained from durum wheat grains harvested 1 to 2 weeks after anthesis. Doughs were obtained by both the straight-dough and sourdough processes. Two selected exopolysaccharide-producing strains of lactic acid bacteria (LAB), Leuconostoc lactis A95 and Lactobacillus curvatus 69B2, were used as starters. Immature flour contained 2.21 g/100 g (dry weight) of fructo-oligosaccharides. Twenty percent immature flour in dough resulted in a shorter leavening time (4.23 ± 0.03 h) than with the control and dough with 10% immature flour. The total titratable acidity of sourdough with 20% immature flour was higher (12.75 ± 0.15 ml 0.1 N NaOH) than in the control and sourdough with 10% immature wheat flour (9.20 ml 0.1 N NaOH). Molecular analysis showed that all samples contained three LAB species identified as L. lactis, L. curvatus, and Pediococcus acidilactici. A larger amount of exopolysaccharide was found in sourdough obtained with 20% immature flour (5.33 ± 0.032 g/kg), positively influencing the exopolysaccharide content of the bread prepared by the sourdough process (1.70 ± 0.03 g/kg). The addition of 20% immature flour also led to a greater presence of fructo-oligosaccharides in the bread (900 mg/100 g dry weight), which improved its nutritional characteristics. While bread volume decreased as the concentration of immature wheat flour increased, its mechanical characteristics (stress at a strain of 30%) were the same in all samples obtained with different percentages
Andualem, Berhanu; Gessesse, Amare
Objective To investigate and optimize microbial media that substitute peptone agar using brebra seed defatted flour. Methods 'Defatted process, inoculums preparation, evaluation of bacterial growth, preparation of cooked and hydrolyzed media and growth turbidity of tested bacteria were determined. Results Two percent defatted flour was found to be suitable concentration for the growth of pathogenic bacteria: Escherichia coli (ATCC 25922) (E. coli), Pseudomonas aeruginosa (ATCC 27853), Salmonella (NCTC 8385) and Shigella flexneri (ATCC 12022) (S. flexneri), while 3% defatted flour was suitable for Staphylococcus aureus (ATCC 25923) (S. aureus). E. coli (93±1) and S. flexneri (524±1) colony count were significantly (P≤0.05) greater in defatted flour without supplement than in supplemented medium. E. coli [(3.72×109±2) CFU/mL], S. aureus [(7.4×109±2) CFU/mL], S. flexneri [(4.03×109±2) CFU/mL] and Salmonella [(2.37×109±1) CFU/mL] in non-hydrolyzed sample were statistically (P≤0.05) greater than hydrolyzed one and commercial peptone agar. Colony count of Salmonella [(4.55×109±3) CFU/mL], S. flexneri [(5.40×109±3) CFU/mL] and Lyesria moncytogenes (ATCC 19116) [(5.4×109±3) CFU/mL] on raw defatted flour agar was significantly (P≤0.05) greater than cooked defatted flour and commercial peptone agar. Biomass of E. coli, S. aureus, Salmonella and Enterococcus faecalis in non-hydrolyzed defatted flour is highly increased over hydrolyzed defatted flour and commercial peptone broth. Conclusions The defatted flour agar was found to be better microbial media or comparable with peptone agar. The substances in it can serve as sources of carbon, nitrogen, vitamins and minerals that are essential to support the growth of microorganisms without any supplements. Currently, all supplements of peptone agar are very expensive in the market. PMID:24075344
Andualem, Berhanu; Gessesse, Amare
To investigate and optimize microbial media that substitute peptone agar using brebra seed defatted flour. Defatted process, inoculums preparation, evaluation of bacterial growth, preparation of cooked and hydrolyzed media and growth turbidity of tested bacteria were determined. Two percent defatted flour was found to be suitable concentration for the growth of pathogenic bacteria: Escherichia coli (ATCC 25922) (E. coli), Pseudomonas aeruginosa (ATCC 27853), Salmonella (NCTC 8385) and Shigella flexneri (ATCC 12022) (S. flexneri), while 3% defatted flour was suitable for Staphylococcus aureus (ATCC 25923) (S. aureus). E. coli (93±1) and S. flexneri (524±1) colony count were significantly (P≤0.05) greater in defatted flour without supplement than in supplemented medium. E. coli [(3.72×10(9)±2) CFU/mL], S. aureus [(7.4×10(9)±2) CFU/mL], S. flexneri [(4.03×10(9)±2) CFU/mL] and Salmonella [(2.37×10(9)±1) CFU/mL] in non-hydrolyzed sample were statistically (P≤0.05) greater than hydrolyzed one and commercial peptone agar. Colony count of Salmonella [(4.55×10(9)±3) CFU/mL], S. flexneri [(5.40×10(9)±3) CFU/mL] and Lyesria moncytogenes (ATCC 19116) [(5.4×10(9)±3) CFU/mL] on raw defatted flour agar was significantly (P≤0.05) greater than cooked defatted flour and commercial peptone agar. Biomass of E. coli, S. aureus, Salmonella and Enterococcus faecalis in non-hydrolyzed defatted flour is highly increased over hydrolyzed defatted flour and commercial peptone broth. The defatted flour agar was found to be better microbial media or comparable with peptone agar. The substances in it can serve as sources of carbon, nitrogen, vitamins and minerals that are essential to support the growth of microorganisms without any supplements. Currently, all supplements of peptone agar are very expensive in the market. Copyright © 2013 Asian Pacific Tropical Biomedical Magazine. Published by Elsevier B.V. All rights reserved.
de la Horra, Ana E.; Steffolani, María Eugenia; Barrera, Gabriela N.; Ribotta, Pablo D.
Summary The effect of protein composition and content on the characteristics and properties of laminated baked products has been studied for a long time. However, there are no flour quality parameters related to its suitability to produce yeast-leavened laminated salty baked products. The relationships among flour characteristics, laminated dough pieces and baked products were studied in order to establish flour quality parameters and help predict the quality of the products. Yeast-leavened salty laminated products made with hard wheat flour had better quality properties than the products made with soft wheat flour. Hydrophilic components and a high gluten network quality are responsible for the generation of a rigid structure and viscous dough. Consequently, during baking, the dough rises rather than extends laterally and does not experience any change in the expected shape. Among the analysed flour characteristics, glutenin macropolymer content, lactic acid and sodium carbonate solvent retention capacities together with dough viscosity and resistance to deformation were the variables which influenced the most the quality of yeast-leavened salty laminated products. PMID:27904379
de la Horra, Ana E; Steffolani, María Eugenia; Barrera, Gabriela N; Ribotta, Pablo D; León, Alberto E
The effect of protein composition and content on the characteristics and properties of laminated baked products has been studied for a long time. However, there are no flour quality parameters related to its suitability to produce yeast-leavened laminated salty baked products. The relationships among flour characteristics, laminated dough pieces and baked products were studied in order to establish flour quality parameters and help predict the quality of the products. Yeast-leavened salty laminated products made with hard wheat flour had better quality properties than the products made with soft wheat flour. Hydrophilic components and a high gluten network quality are responsible for the generation of a rigid structure and viscous dough. Consequently, during baking, the dough rises rather than extends laterally and does not experience any change in the expected shape. Among the analysed flour characteristics, glutenin macropolymer content, lactic acid and sodium carbonate solvent retention capacities together with dough viscosity and resistance to deformation were the variables which influenced the most the quality of yeast-leavened salty laminated products.
Polymer composites were prepared by melt-mixing polymer and soy flour composite fillers in an internal mixer. Soy flour composite fillers were prepared by blending aqueous dispersion of soy flour with styrene-butadiene rubber latex, dried, and cryogenically ground into powders. Upon crosslinking, th...
Yuan, Biao; Zhao, Liyan; Yang, Wenjian; McClements, David Julian; Hu, Qiuhui
Edible mushrooms contain a variety of bioactive molecules that may enhance human health and wellbeing. Consequently, there is increasing interest in fortifying functional foods with these nutraceutical-rich substances. However, incorporation of mushroom-based ingredients into foods should not adversely affect the quality attributes of the final product. In this study, the impact of incorporating powdered Auricularia auricula, a widely consumed edible mushroom, into bread products was examined. The rheological and structural properties of wheat dough and bread supplemented with 0% to 10% (w/w) A. auricula flour were measured. Supplementation of wheat doughs with A. auricula flour increased the peak viscosity and enhanced their water holding capacity. Rapid viscosity analysis showed that peak and final viscosities of the blended flour (wheat flour with A. auricula flour) were higher than wheat flour alone. However, dough stability and elastic modulus were reduced by blending wheat flour with A. auricula flour. SEM observation showed that doughs with up to 5% (w/w) A. auricula flour had acceptable gluten network microstructure. Characterization of the quality attributes of bread indicated that incorporation of A. auricula flour at levels >5% negatively impacted bread volume, height, texture, and appearance. © 2017 Institute of Food Technologists®.
Siriamornpun, Sirithon; Tangkhawanit, Ekkarat; Kaewseejan, Niwat
Green and ripe mango peel powders (MPP) were added to normal rice flour (NRF) and glutinous rice flour (GRF) at three levels (400, 800 and 1200 ppm) and their effects on physicochemical properties and lipid oxidation inhibition were investigated. Overall, MPP increased the breakdown viscosity and reduced the final viscosity in rice flours when compared to the control. Decreasing in retrogradation was observed in both NRF and GRF with MPP added of all levels. MPP addition also significantly inhibited the lipid oxidation of all flours during storage (30 days). Retrogradation values were strongly negatively correlated with total phenolic and flavonoid contents, but not with fiber content. The hydrogen bonds and hydrophilic interactions between phenolic compounds with amylopectin molecule may be involved the decrease of starch retrogradation, especially GRF. We suggest that the addition of MPP not only reduced the retrogradation but also inhibited the lipid oxidation of rice flour. Copyright © 2016 Elsevier Ltd. All rights reserved.
Charoenthaikij, Phantipha; Jangchud, Kamolwan; Jangchud, Anuvat; Prinyawiwatkul, Witoon; Tungtrakul, Patcharee
Brown rice has been reported to be more nutritious after germination. Germinated brown rice flours (GBRFs) from different steeping conditions (in distilled water [DI, pH 6.8] or in a buffer solution [pH 3] for either 24 or 48 h at 35 degrees C) were evaluated in this study. GBRF obtained from brown rice steeped at pH 3 for 48 h contained the highest amount of free gamma aminobutyric acid (GABA; 67 mg/100 g flour). The composite flour (wheat-GBRF) at a ratio of 70 : 30 exhibited significantly lower peak viscosity (PV) (56.99 - 132.45 RVU) with higher alpha-amylase activity (SN = 696 - 1826) compared with those of wheat flour (control) (PV = 136.46 RVU and SN = 1976). Bread formulations, containing 30% GBRF, had lower loaf volume and greater hardness (P < 0.05) than the wheat bread. However, the hardness of bread containing 30% GBRF (except at pH 6.8 and 24 h) was significantly lower than that of bread containing 30% nongerminated brown rice flour (BRF). Acceptability scores for aroma, taste, and flavor of breads prepared with or without GBRFs (30% substitution) were not significantly different, with the mean score ranging from 6.1 (like slightly) to 7 (like moderately). Among the bread formulations containing GBRF, the one with GBRF prepared after 24 h steeping at pH 3 had a slightly higher (though not significant) overall liking score (6.8). This study demonstrated that it is feasible to substitute wheat flour with up to 30% GBRF in bread formulation without negatively affecting sensory acceptance. Practical Application: Our previous study revealed that flours from germinated brown rice have better nutritional properties, particularly gamma-aminobutyric acid (GABA), than the nongerminated one. This study demonstrated feasibility of incorporating up to 30% germinated brown rice flour in a wheat bread formulation without negatively affecting sensory acceptance. In the current United States market, this type of bread may be sold as frozen bread which would have a
Hot paste obtained by autoclaving (130oC, 20 psi, 20-30 min) a 5-7% (w/w) rice flour or starch slurry, was precipitated with ethanol (three extractions) to produce a dry, porous, pregelatinized powder with an average particle size of 75.0µm (flour-derived powder), and 41.6µm (starch-derived powder)....
Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan
This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF). The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE), acetone/water (AW), and hot water (HW), or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial...
Chan, Kim Wei; Khong, Nicholas M. H.; Iqbal, Shahid; Ismail, Maznah
The present study was conducted to evaluate the antioxidant properties of wheat and rice flours under simulated gastrointestinal pH condition. After subjecting the wheat and rice flour slurries to simulated gastrointestinal pH condition, both slurries were centrifuged to obtain the crude phenolic extracts for further analyses. Extraction yield, total contents of phenolic and flavonoids were determined as such (untreated) and under simulated gastrointestinal pH condition (treated). 1,1-diphenyl-2-picrylhydrazyl radical (DPPH•) scavenging activity, 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) radical cation (ABTS•+) scavenging activity, ferric reducing antioxidant power (FRAP), beta-carotene bleaching (BCB) and iron chelating activity assays were employed for the determination of antioxidant activity of the tested samples. In almost all of the assays performed, significant improvements in antioxidant properties (p < 0.05) were observed in both flours after treatment, suggesting that wheat and rice flours contain considerably heavy amounts of bound phenolics, and that their antioxidant properties might be improved under gastrointestinal digestive conditions. PMID:22837707
Hançerlioğulları, Begüm Zeynep; Köksel, Hamit; Dudak, Fahriye Ceyda
Since the common protease substrates did not give satisfactory results for the determination of Sunn pest protease activity in damaged wheat, different peptide substrates derived from the repeat sequences of high molecular weight glutenin subunits were synthesized. Hydrolysis of peptides by pest protease was determined by HPLC. Among three peptides having the same consensus motifs, peptide1 (PGQGQQGYYPTSPQQ) showed the best catalytic efficiency. A novel assay was described for monitoring the enzymatic activity of protease extracted from damaged wheat flour. The selected peptide was labeled with a fluorophore (EDANS) and quencher (Dabcyl) to display fluorescence resonance energy transfer (FRET). The proteolytic activity was measured by the change in fluorescence intensity that occurred when the protease cleaved the peptide substrate. Furthermore, the developed assay was modified for rapid and easy detection of bug damage in flour. Flour samples were suspended in water and mixed with fluorescence peptide substrate. After centrifugation, the fluorescence intensities of the supernatants were determined which is proportional with the protease content of the flour. The total analysis time for the developed assay is estimated as 15 minutes. The developed assay permits a significant decrease in time and labor, offering sensitive detection of Sunn pest damage in wheat flour. This article is protected by copyright. All rights reserved.
Concrete arenas with and without flour were placed in open, obstructed, and hidden positions inside a commercial flour mill and exposed to a combination treatment of pyrethrin + methoprene. Bioassays were conducted 1, 3, 5, and 7 weeks after the arenas were treated by adding flour to those arenas th...
Zharkova, I. M.; Safonova, Yu A.; Slepokurova, Yu I.
There are the results of experimental studies about the influence of infrared treatment (IR processing) parameters of the amaranth grits before their grinding into flour on the composition and properties of the received product. Using the method called as regressionfactor analysis, the optimal conditions of the thermal processing to the amaranth grits were obtained: the belt speed of the conveyor – 0.049 m/s; temperature of amaranth grits in the tempering silo – 65.4 °C the thickness of the layer of amaranth grits on the belt is 3 - 5 mm and the lamp power is 69.2 kW/m2. The conducted researches confirmed that thermal effect to the amaranth grains in the IR setting allows getting flour with a smaller size of starch grains, with the increased water-holding ability, and with a changed value of its glycemic index. Mathematical processing of experimental data allowed establishing the dependence of the structural and technological characteristics of the amaranth flour on the IR processing parameters of amaranth grits. The obtained results are quite consistent with the experimental ones that proves the effectiveness of optimization based on mathematical planning of the experiment to determine the influence of heat treatment optimal parameters of the amaranth grits on the functional and technological properties of the flour received from it.
Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan
This study investigated the effect of using extracted and delignified wood flour on water sorption properties of woodâplastic composites. Wood flour (WF) extraction was performed with three solvent systems: toluene/ethanol (TE), acetone/water (AW), and hot water (HW); delignification was conducted using sodium chlorite/acetic acid solution. A 24 full-factorial...
Ozkahraman, Betul Canan; Sumnu, Gulum; Sahin, Serpil
The objective of this study was to compare the quality of legume cakes baked in microwave-infrared combination (MW-IR) oven with conventional oven. Legume cake formulations were developed by replacing 10 % wheat flour by lentil, chickpea and pea flour. As a control, wheat flour containing cakes were used. Weight loss, specific volume, texture, color, gelatinization degree, macro and micro-structure of cakes were investigated. MW-IR baked cakes had higher specific volume, weight loss and crust color change and lower hardness values than conventionally baked cakes. Larger pores were observed in MW-IR baked cakes according to scanning electron microscope (SEM) images. Pea flour giving the hardest structure, lowest specific volume and gelatinization degree was determined to be the least acceptable legume flour. On the other hand, lentil and chickpea flour containing cakes had the softest structure and highest specific volume showing that lentil and chickpea flour can be used to produce functional cakes.
Bhat, Rajeev; Sridhar, Kandikere Ramaiah; Karim, Alias A; Young, Chiu C; Arun, Ananthapadmanabha B
In the present study, we investigated the physicochemical and functional properties of lotus seed flour exposed to low and high doses of gamma-radiation (0-30 kGy; the dose recommended for quarantine and hygienic purposes). The results indicated raw seed flour to be rich in nutrients with minimal quantities of antinutritional factors. Irradiation resulted in a dose-dependent increase in some of the proximal constituents. The raw and gamma-irradiated seeds meet the Food and Agricultural Organization-World Health Organization recommended pattern of essential amino acids. Some of the antinutritional factors (phytic acid, total phenolics, and tannins) were lowered with gamma-irradiation, while the seed flours were devoid of lectins, L-3,4-dihydroxyphenylalanine, and polonium-210. The functional properties of the seed flour were significantly improved with gamma-radiation. gamma-radiation selectively preserved or improved the desired nutritional and functional traits of lotus seeds, thus ensuring a safe production of appropriate nutraceutically valued products.
Meyer, N R; Stuart, M A; Weaver, C M
Bioavailability of zinc from diets prepared from intrinsically and extrinsically labeled autoclaved, defatted soy flour and scrambled, freeze-dried egg was investigated in male rats marginally depleted in zinc. In one study, retention of zinc from intrinsically labeled soybean flour (73%) was significantly less than from 65ZnCl2 extrinsically added to a soy flour-based diet (80%). Zinc from intrinsically labeled soybean hulls and from soy flour diets containing 10% soybean hulls extrinsically labeled with 65ZnCl2 was as available as the zinc from the extrinsically labeled soy flour diet. In a second study, extrinsic and intrinsic labeling techniques gave a similar assessment of bioavailability of zinc from egg- and soy flour-based diets when extrinsic labeling was accomplished by thoroughly mixing 65ZnCl2 with the protein source prior to incorporation into the diet. Absorption of 65Zn was greater from egg diets than from soy flour diets and of intermediate value from mixed soy flour and egg (50:50, wt/wt) diets regardless of which protein source was labeled, indicating that the zinc entered a common pool.
Shobha, D; Kumar, H V Dileep; Sreeramasetty, T A; Puttaramanaik; Gowda, K T Pandurange; Shivakumar, G B
Apart from nutritional values functional and sensory properties affect the behavior of food system and its acceptability for consumption during storage. Hence keeping quality of maize flour (HQPM-7) with and without lime treatment(control) was studied in terms of functional (bulk density, pH, swelling capacity, water and oil absorption capacity, least gelation concentration, peroxide value), sensory (appearance, color, taste, texture, mouth feel and overall acceptability) and rolling parameters (water absorption by flour, rolling quality, diameter after baking ) for a period of 6 months under room temperature (25 ± 5 °C) in two types of packages viz, LDPE cover (P) and plastic box (B). Physical parameters such as length, breadth and thickness (11.26-10.52 mm, 9.67-9.14 mm, & 4.72-3.95 mm) were reduced in lime treated grains compared to control. Significant increase (p ≤ 0.05) in ash content of lime treated flour (1.67 ± 0.01 g) was observed compared to control (1.5 ± 0.02 g). Calcium content of lime treated maize flour increased significantly (p ≤ 0.05) from 48 to 136 mg. There is a significant reduction in functional properties of flour after 3 and 2 months irrespective in polyethylene cover and plastic box. The properties like rolling quality, diameter after baking and water uptake by the flour were reduced significantly (p ≤ 0.05) after 4 months of storage in treated and after 1 month in control samples. Sensory scores of roti (dry pan cake) decreased significantly after 3 months of storage with an overall acceptability score of 4.0 and 3.4. In control samples mean taste (3.6), mouth feel (3.8) as well as OAA scores (3.8) decreased after second month. Hence lime treated maize flour with added nutritional benefits is suitable for making rotis of good palatability and can be stored in LDPE covers up to 3 months.
Clément, Héliciane; Prost, Carole; Chiron, Hubert; Ducasse, Maren Bonnand; Della Valle, Guy; Courcoux, Philippe; Onno, Bernard
In this study, we determined the effect of organic (i) flour ash content (1%-1.4%) and (ii) flour by-product addition (bran, shorts and germ) on sourdough performances. After five consecutive back-sloppings, sourdough was used for bread-making and its bread-related properties were assessed. No effect of flour composition factors (i & ii) on sourdough lactic acid bacteria and yeasts were highlighted. Nonetheless, they greatly altered lactic acid and acetic acid sourdough contents from 6.9 to 17.4 g/kg and from 0.9 to 2.2 g/kg, respectively. The flour ash content (i) had a significant and positive effect on sourdough acidity and CO 2 production. Bread made with sourdough with a high ash content had a significantly higher acidity and specific volume. These physicochemical differences between breads were perceived by sensory evaluation in a significant way. Sourdough supplemented (ii) with germ had higher lactic acid and carbon dioxide contents than sourdough supplemented with bran and shorts. Hence, flour composition, combining ash content and flour by-products, appears to be an effective factor to obtain a better control of sourdough performances. Copyright © 2018 Elsevier Ltd. All rights reserved.
Baatjies, Roslynn; Meijster, Tim; Heederik, Dick; Sander, Ingrid; Jeebhay, Mohamed F
A recent study of supermarket bakery workers in South Africa demonstrated that 25% of workers were sensitised to flour allergens and 13% had baker's asthma. Evidence on exposure reduction strategies using specifically designed interventions aimed at reducing the risk of baker's asthma is scarce. The aim of this study was to evaluate the effectiveness of different control measures to reduce airborne flour dust exposure using a randomised design. A group-randomised study design was used to assign 30 bakeries of a large supermarket chain store to two intervention groups and a control group, of which 15 bakeries were studied. Full-shift environmental personal samples were used to characterise exposure to flour dust and wheat and rye allergens levels pre-intervention (n=176) and post-intervention (n=208). The overall intervention effect revealed a 50% decrease in mean flour dust, wheat and rye allergen exposure. The reduction in exposure was highest for managers (67%) and bakers (47%), and lowest for counterhands (23%). For bakers, the greatest reduction in flour dust was associated with control measures such as the use of the mixer lid (67%), divider oil (63%) or focused training (54%). However, the greatest reduction (80%) was observed when using a combination of all control measures. A specially designed intervention strategy reduced both flour dust and allergen levels. Best results were observed when combining both engineering controls and training. Further studies will investigate the long-term health impact of these interventions on reducing the disease burden among this group of bakers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
The relationship of physicochemical properties of flour, including particle size of flour, damaged starch, SDS-sedimentation volume, gluten content and four solvent retention capacity (SRC) values with cookie baking quality, including cookie diameter and thickness was evaluated using 30 Korean wheat...
Bucsella, Blanka; Takács, Ágnes; Vizer, Viktoria; Schwendener, Urs; Tömösközi, Sándor
Dry and hydrothermal heat treatments are efficient for modifying the technological-functional and shelf-life properties of wheat milling products. Dry heat treatment process is commonly used to enhance the volume of cakes. Hydrothermal heat treatment makes wheat flours suitable as thickener agents. In this study, cake and bread wheat flours that differed in baking properties were exposed to dry (100 °C, 12 min) and hydrothermal (95 °C, 5 min, 5-20 l/h water) heat treatments. Rheological differences caused by the treatments were investigated in a diluted slurry and in a dough matrix. Dry heat treatment resulted in enhanced dough stability. This effect was significantly higher in the cake flour than the bread flour. Altered viscosity properties of the bread flour in the slurry matrix were also observed. The characteristics of hydrothermally treated samples showed matrix dependency: their viscosity increases in the slurry and decreases in the dough matrix. These results can support us to produce flour products with specific techno-functional properties. Copyright © 2015 Elsevier Ltd. All rights reserved.
Becker, Fernanda Salamoni; Damiani, Clarissa; de Melo, Adriane Alexandre Machado; Borges, Paulo Rogério Siriano; Boas, Eduardo Valério de Barros Vilas
Cookies were prepared by replacing a mixture of brown rice flour (70%) and corn starch (30%) (BRFCS) by buriti endocarp flour (BEF) (0, 5, 10, 15 or 20%). BEF figured as a potential source of dietary fiber (70.53 g 100 g(-1)), especially of insoluble fiber (67.50 g 100 g(-1)), and gluten-free whole cookies showed increased dietary fiber content by adding 5, 10, 15 and 20% BEF (8.58 to 20.02 g 100 g(-1)) when compared to control cookie (6.91 g 100 g(-1)). The addition of BEF affected diameter, spread ratio, color and texture of cookies. All cookies added with BEF were darker, harder and presented smaller diameter and smaller spread ratio than the control cookie. These difference increased proportionally to level of substitution of BRFSC by BEF. Gluten-free whole cookies with up to 15% BEF were well accepted by consumers. Therefore, the use of BEF in cookies may increase the availability of functional ingredients source of dietary fiber for celiac consumers, add economic value to buriti processing by-products and decrease environmental impacts due to the high amounts of waste generated by buriti processing industries.
Sumardiono, Siswo; Pudjihastuti, Isti; Handayani, Noer Abyor; Kusumayanti, Heny
Indonesia is the third largest country on the global paddy rice production and also considered as a rice importer. Even, Indonesia has the biggest per capita consumption of paddy rice (140 kg of paddy rice per person per year). Product diversification using local commodities. Artificial rice is potential to be developed as a new value product using different types of grains. It is one of appropriate solutions for reducing imported rice rate. Artificial rice was produced using high nutrition composite flours (modified cassava starch, corn, Canavalian ensiformis, and Dioscorea esculenta). This study consists of three main stages, preparation of composite flour, formulation, and artificial rice production using hot extruder capacity 10 kg/day. The objectives of this studies were to investigate some formulation in compare with commercial paddy rice. Artificial rice has been successfully conducted using prototype of hot extruder with the temperature 95°C. Physical analyses (color and water absorption) were carried out to artificial rice product and commercial paddy rice. Chemical analyses (nutrition and amylose content) of product will be also presented in this study. The best formulation of artificial rice was achieved in 80% modified cassava starch, 10% Canavalian ensiformis, and 10% Dioscorea esculenta, respectively.
Alborch, L; Bragulat, M R; Castellá, G; Abarca, M L; Cabañes, F J
Mycobiota and co-occurrence of aflatoxins, citrinin, ochratoxin A and zearalenone in 30 samples of maize flours and 30 of popcorn kernels purchased in Spain for human consumption were determined. The mycotoxin-producing ability of Aspergillus, Fusarium and Penicillium spp. was also studied. Total fungal counts of maize flours ranged from <10 to 8.4 × 10(4) CFU/g and predominant mycobiota belonged to Aspergillus spp. and Penicillium spp. In popcorn kernels samples the most frequent species were Aspergillus spp., Mucorales, Fusarium spp. and Penicillium spp. Aflatoxins were produced by Aspergillus flavus and Aspergillus parasiticus, citrinin by Penicillium citrinum and Penicillium verrucosum, ochratoxin A by Aspergillus niger and patulin by Aspergillus clavatus and Penicillium griseofulvum. Identification of all the mycotoxin-producing strains as well as some Aspergillus spp. difficult to identify using phenotypic characters only was also performed by molecular methods. Aflatoxins were detected in 14 maize flours and 2 popcorn kernels samples, while ochratoxin A was detected in 4 maize flours and 10 popcorn samples. Co-occurrence of aflatoxins and ochratoxin A was found in the 4 ochratoxin-positive maize flour samples. Citrinin and zearalenone were not detected. This is the first report of aflatoxins and ochratoxin A contamination in maize flours and popcorn kernels commercialized in Spain. Copyright © 2012 Elsevier Ltd. All rights reserved.
We conducted studies using a commercial freezer maintained at -17.8°C to determine the time needed to kill Tribolium castaneum eggs in a pallet of flour. Each bag weighed 22.7 kg, and there were 5 bags in each of 10 layers. The dimensions of the pallet were 109-cm wide by 132-cm long by 123-cm tall,...
Menezes, Elizabete Wenzel; Dan, Milana C T; Cardenette, Giselli H L; Goñi, Isabel; Bello-Pérez, Luis Arturo; Lajolo, Franco M
This work aimed to study the in vitro colonic fermentation profile of unavailable carbohydrates of two different kinds of unripe banana flour and to evaluate their postprandial glycemic responses. The unripe banana mass (UBM), obtained from the cooked pulp of unripe bananas (Musa acuminata, Nanicão variety), and the unripe banana starch (UBS), obtained from isolated starch of unripe banana, plantain type (Musa paradisiaca) in natura, were studied. The fermentability of the flours was evaluated by different parameters, using rat inoculum, as well as the glycemic response produced after the ingestion by healthy volunteers. The flours presented high concentration of unavailable carbohydrates, which varied in the content of resistant starch, dietary fiber and indigestible fraction (IF). The in vitro colonic fermentation of the flours was high, 98% for the UBS and 75% for the UBM when expressed by the total amount of SCFA such as acetate, butyrate and propionate in relation to lactulose. The increase in the area under the glycemic curve after ingestion of the flours was 90% lower for the UBS and 40% lower for the UBM than the increase produced after bread intake. These characteristics highlight the potential of UBM and UBS as functional ingredients. However, in vivo studies are necessary in order to evaluate the possible benefit effects of the fermentation on intestinal health.
Drakos, Antonios; Kyriakakis, Georgios; Evageliou, Vasiliki; Protonotariou, Styliani; Mandala, Ioanna; Ritzoulis, Christos
Finer barley and rye flours were produced by jet milling at two feed rates. The effect of reduced particle size on composition and several physicochemical and mechanical properties of all flours were evaluated. Moisture content decreased as the size of the granules decreased. Differences on ash and protein contents were observed. Jet milling increased the amount of damaged starch in both rye and barley flours. True density increased with decreased particle size whereas porosity and bulk density increased. The solvent retention capacity profile was also affected by jet milling. Barley was richer in phenolics and had greater antioxidant activity than rye. Regarding colour, both rye and barley flours when subjected to jet milling became brighter, whereas their yellowness was not altered significantly. The minimum gelation concentration for all flours was 16%w/v. Barley flour gels were stronger, firmer and more elastic than the rye ones. Copyright © 2016 Elsevier Ltd. All rights reserved.
Bulat, Petar; Myny, Katrien; Braeckman, Lutgart; van Sprundel, Marc; Kusters, Edouard; Doekes, Gert; Pössel, Kerstin; Droste, Jos; Vanhoorne, Michel
This study was designed to characterize exposure to inhalable dust, wheat flour and alpha-amylase allergens in industrial and traditional bakeries. The study included 70 bakeries from the northern part of Belgium. Based on the degree of automation and a clear division of individual job tasks, four bakeries were identified as industrial and the remaining 66 were identified as traditional ones. Personal, as well as stationary, samples of inhalable dust were collected during full shift periods, usually 5-7 h. The portable pumps aspirated 2 l/min through Teflon personal dust samplers (Millipore, pore size 1.0 microm) mounted in PAS-6 sampling heads. In the collected samples the inhalable dust, wheat flour and alpha-amylase allergens were determined. Wheat flour allergens were measured using enzyme-linked immunosorbent assay inhibition and an antiwheat IgG4 serum pool. The alpha-amylase allergens were measured using a sandwich enzyme immunoassay with affinity-purified polyclonal rabbit IgG antibodies. In total, 440 samples (300 personal and 140 stationary) were processed. The highest inhalable dust exposure was observed in traditional bakeries among bread [geometric mean (GM) 2.10 mg/m3] and bread and pastry workers (GM 1.80 mg/m3). In industrial bakeries the highest dust exposure was measured in bread-producing workers (GM 1.06 mg/m3). Similar relations were observed for wheat flour and alpha-amylase allergens. Bread baking workers in traditional bakeries had the highest exposure to both allergens (wheat flour GM 22.33 microg/m(3), alpha-amylase GM 0.61 ng/m3). The exposure to wheat flour and alpha-amylase allergens in industrial bakeries was higher in bread baking workers (wheat flour GM 6.15 microg/m3, alpha-amylase GM 0.47 ng/m3) than in bread packing workers (wheat flour GM 2.79 microg/m3, alpha-amylase GM 0.15 ng/m3). The data presented suggest that, on average, exposure in the Belgium bakeries studied-industrial as well as traditional-is lower than or similar to
Mancebo, Camino M; Merino, Cristina; Martínez, Mario M; Gómez, Manuel
Gluten-free bread production requires gluten-free flours or starches. Rice flour and maize starch are two of the most commonly used raw materials. Over recent years, gluten-free wheat starch is available on the market. The aim of this research was to optimize mixtures of rice flour, maize starch and wheat starch using an experimental mixture design. For this purpose, dough rheology and its fermentation behaviour were studied. Quality bread parameters such as specific volume, texture, cell structure, colour and acceptability were also analysed. Generally, starch incorporation reduced G* and increased the bread specific volume and cell density, but the breads obtained were paler than the rice flour breads. Comparing the starches, wheat starch breads had better overall acceptability and had a greater volume than maize-starch bread. The highest value for sensorial acceptability corresponded to the bread produced with a mixture of rice flour (59 g/100 g) and wheat starch (41 g/100 g).
Hernawati; Aryani, A.; Shintawati, R.
The purpose of this study to analyze the physical characteristics, chemical composition and organoleptic test of biscuit flour with the addition of flour banana peel. Materials used are banana peels Kepok. Kepok banana peel has been found to contain high fiber food. Biscuit-making stage includes the formation of cream, adding flour and wheat flour dietary fiber from banana peels to concentrations of 0% as control, 25%, 50% and 75% of 100 grams of wheat flour; mixing; molding; baking in the oven for 20-25 minutes with a temperature of 180°C. Parameters to be measured, namely the physical characteristics include: hardness, softness, consistency, crispness. Furthermore, the biscuits were tested by chemical analysis (proximate). Organoleptic test include: aroma, taste, mouthfeel, aftertaste. Data were analyzed statistically using SAS computing programs. Physical and organoleptic test results biscuits with the addition of flour banana peels has sufficient level of preference between like-liked. Based on the results of the proximate analysis of biscuits with the addition of flour banana peels has generally been in accordance with the National Standards of Indonesia (SNI). Conclusion of the study that the addition of flour banana peels in biscuits has the potential to become functional foods that contain high fiber.
Clerici, Maria Teresa Pedrosa Silva; El-Dash, Ahmed A
Research regarding the production of gluten-free bread (GFB) is very important nutritionally, technically and economically speaking, both to celiac patients and to developing countries who import wheat. The main technological problem in the production of GFB is obtaining a gluten substitute that is both inexpensive and capable of retaining gas during bread fermentation and baking. The use of gelatinized starch as an alternative for gluten seems promising. In this project, rice bread was made using pregelatinized extruded rice flour as a gluten substitute. Pre-gelatinized rice flours (PRF) were manufactured in a single screw Brabender extruder, varying extrusion temperature (108-192 degrees C) and the moisture of the raw material (19.2 - 24.8%), and were used in a proportion of 10 g for every 100 g of raw rice flour, in the production of gluten-free bread. Results showed that rice flour extruded at a high temperature (180 degrees) and low moisture content (20%), rendered bread with the best technological characteristics, presenting crust and crumb color similar to those of conventional wheat bread, although with volume and texture not as satisfactory in the same comparison.
Excess steam jet-cooked composites containing wheat flour and 30 to 55% canola oil were drum dried and used to replace the oil and part of the flour in low-fat cake mix formulations. Specific gravity and viscosity of cake batters were measured. The cakes were analyzed for crumb grain, color, textu...
Nadhirah, A. Ainatun.; Sam, S. T.; Noriman, N. Z.; Voon, C. H.; Samera, S. S.
The effect of rambutan peels flour (RPF) content on the tensile properties of linear low density polyethylene filled with rambutan peel flour was studied. RPF was melt blended with linear low-density polyethylene (LLDPE). LLDPE/RPF blends were prepared by using internal mixer (brabender) at 160 °C with the flour content ranged from 0 to 15 wt%. The tensile properties were tested by using a universal testing machine (UTM) according to ASTM D638. The highest tensile strength was observed for pure LLDPE while the tensile strength LLDPE/RPF decreased gradually with the addition of rambutan peels flour content from 0% to 15%. Young's modulus of 63 µm to 250 µm rambutan peels blends with LLDPE with the fiber loading of 0 - 15 wt% increased with increasing fiber loading.
Kweon, Meera; Slade, Louise; Levine, Harry; Gannon, Diane
The many differences between cookie- and cracker-baking are discussed and described in terms of the functionality, and functional requirements, of the major biscuit ingredients--flour and sugar. Both types of products are similar in their major ingredients, but different in their formulas and processes. One of the most important and consequential differences between traditional cracker and cookie formulas is sugar (i.e., sucrose) concentration: usually lower than 30% in a typical cracker formula and higher than 30% in a typical cookie formula. Gluten development is facilitated in lower-sugar cracker doughs during mixing and sheeting; this is a critical factor linked to baked-cracker quality. Therefore, soft wheat flours with greater gluten quality and strength are typically preferred for cracker production. In contrast, the concentrated aqueous sugar solutions existing in high-sugar cookie doughs generally act as an antiplasticizer, compared with water alone, so gluten development during dough mixing and starch gelatinization/pasting during baking are delayed or prevented in most cookie systems. Traditional cookies and crackers are low-moisture baked goods, which are desirably made from flours with low water absorption [low water-holding capacity (WHC)], and low levels of damaged starch and water-soluble pentosans (i.e., water-accessible arabinoxylans). Rheological (e.g., alveography) and baking tests are often used to evaluate flour quality for baked-goods applications, but the solvent retention capacity (SRC) method (AACC 56-11) is a better diagnostic tool for predicting the functional contribution of each individual flour functional component, as well as the overall functionality of flours for cookie- and/or cracker-baking.
Dzarnisa; Rachmadi, D.; Azhar, A.; Fakhrur Riza, R.; Hidayati, A.
Study on the effect of the addition of mangosteen (Garcinia mangostana L.) peel flour on physiological condition and performance of Etawa crossbreed goats was done. This was to grant the use of mangosteen peel flour that rich of antioxidants and has variety good benefits for health as feed additive for cattle. This study used a Complete Randomized Block Design consisting of 4 treatment groups and 4 replications each. Subjects were 16 female Etawa crossbreed goats randomly designed into treatments group based on lactation periods. Subjects were feed with traditional rations (control, A), traditional rations and 2.5% mangosteen peel flour (B), tradition rations and 5% mangosteen peel flour (C), and traditional rations and 7,5 % mangosteen peel flour (D). Data on performance (milk production) and physiological condition (respiratory frequency, rectal temperature, and heart rate) obtained were analyzed using analysis of variance (ANOVA). The results showed that the addition of mangosteen peel flour as food additive in the rations resulted in variations in the milk production, physiological condition (rectal temperature, heart rate and respiration frequency) and performances (daily weigh gain, food consumption, ration conversion and breast volume) of Etawa crossbreed goats, but significant effect was only observed in the respiration frequency. The addition of 2.5% mangosteen peel flour in the ration caused the best, expected effects on milk production physiological condition and performance of Etawa crossbreed goats.
Shariati-Ievari, Shiva; Ryland, Donna; Edel, Andrea; Nicholson, Tiffany; Suh, Miyoung; Aliani, Michel
Pulses are known to be nutritious foods but are susceptible to oxidation due to the reaction of lipoxygenase (LOX) with linolenic and linoleic acids which can lead to off flavors caused by the formation of volatile organic compounds (VOCs). Infrared micronization at 130 and 150 °C was investigated as a heat treatment to determine its effect on LOX activity and VOCs of chickpea and green lentil flour. The pulse flours were added to low-fat beef burgers at 6% and measured for consumer acceptability and physicochemical properties. Micronization at 130 °C significantly decreased LOX activity for both flours. The lentil flour micronized at 150 °C showed a further significant decrease in LOX activity similar to that of the chickpea flour at 150 °C. The lowering of VOCs was accomplished more successfully with micronization at 130 °C for chickpea flour while micronization at 150 °C for the green lentil flour was more effective. Micronization minimally affected the characteristic fatty acid content in each flour but significantly increased omega-3 and n-6 fatty acids at 150 °C in burgers with lentil and chickpea flours, respectively. Burgers with green lentil flour micronized at 130 and 150 °C, and chickpea flour micronized at 150 °C were positively associated with acceptability. Micronization did not affect the shear force and cooking losses of the burgers made with both flours. Formulation of low-fat beef burgers containing 6% micronized gluten-free binder made from lentil and chickpea flour is possible based on favorable results for physicochemical properties and consumer acceptability. © 2016 Institute of Food Technologists®
Ramseyer, Daniel D; Bettge, Arthur D; Morris, Craig F
The purpose of this research was to study the functional differences between straight grade (75% extraction rate) and patent (60% extraction rate) flour blends from 28 genetically pure soft white and club wheat grain lots, as evidenced by variation in sugar snap cookie and Japanese sponge cake quality. Functional differences were examined relative to arabinoxylan content, protein content, and oxidative cross-linking potential of flour slurries. Oxidative cross-linking measurements were obtained on flour slurries with a low shear Bostwick consistometer and considered endogenous oxidative cross-linking potential (water alone) or enhanced oxidative cross-linking potential (with added hydrogen peroxide-peroxidase). A 2-way ANOVA indicated that flour blend was the greater source of variation compared to grain lot for all response variables except water-extractable arabinoxylan content. Patent flours produced larger sugar snap cookies and Japanese sponge cakes, and contained significantly less total and water-unextractable arabinoxylans, protein, and ash than did straight grade flours. Patent flours produced more viscous slurries for endogenous and enhanced cross-linking measurements compared to the straight grade flours. The functional differences between patent and straight grade flours appear to be related to the particular mill streams that were utilized in the formulation of the 2 flour blends and compositional differences among those streams. Journal of Food Science © 2011 Institute of Food Technologists® No claim to original US government works.
Coelho, Emanuela M; de Azevêdo, Luciana C; Viana, Arão C; Ramos, Ingrid G; Gomes, Raquel G; Lima, Marcos Dos S; Umsza-Guez, Marcelo A
The peel of yellow passion fruit is as an agro-industrial waste of great environmental impact, representing more than 50% of the total weight of the fruit. For this reason, and also considering its importance as a source of functional components such as pectin, this organic waste is increasingly attracting the attention of researchers. The aim of this study was to investigate the physico-chemical composition and physical properties of this material, which may be of interest to the food industry. We obtained two samples of passion fruit peel flour applying different processes: flour without treatment (FWOT) and flour with treatment by maceration (FWT). It was found that the flour samples contain, respectively, 372.4 g kg -1 and 246.7 kg -1 of soluble fiber and, according to the FTIR analysis, this material corresponds to high and low methoxyl pectins, respectively. The flour obtained by maceration (FWT) offers greater benefits for industrial use, with 60% fewer tannins and greater thermal stability. In addition, this sample does not reabsorb moisture as easily, although FWOT also shows potential for use in dietary products. Considering the pseudoplastic properties of the flours, the application of both samples could be expanded to many industrial sectors. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.
The influence of jet-cooking Prowashonupana barley flour on total phenolic contents, antioxidant activities, water holding capacities, and viscoelastic properties was studied. Barley flour was jet-cooked without or with pH adjustment at 7, 9, or 11. Generally, the free phenolic content and antioxi...
Martinez-Villaluenga, C; Michalska, A; Frias, J; Piskula, M K; Vidal-Valverde, C; Zieliński, H
The effect of rye flour extraction rates and baking on thiamine and riboflavin content, and antioxidant capacity of traditional rye bread were studied and compared with white wheat flour. The content of thiamine was higher (10.9%) in rye dough formulated with dark rye flour (F-100%; extraction rate of 100%) than in rye dough formulated with brown rye flour (F-92%; extraction rate of 92%) that was similar to dough made with wheat flour. The riboflavin content in rye dough made from flour F-100% was also higher (16%) than in dough formulated with flour F-92%, and both provided larger riboflavin content than wheat dough. Baking led to reductions in thiamine of 56% for wheat bread and of 20% for both rye breads; however, this process caused only a 10% decrease in riboflavin for wheat bread and a 30% decrease for rye breads. Trolox equivalent antioxidant capacity, peroxyl radical scavenging capacity, DPPH radical scavenging activity, and Folin-Ciocalteu reducing capacity were higher in rye than in wheat dough and bread. Baking process produced slight changes in antioxidant activity, except for Superoxide Dismutase-like activity where a sharp decrease was observed. Our findings showed that rye breads are an important source of B vitamins and rye breads formulated with dark and brown flours showed better antioxidant properties than wheat bread. Therefore, rye breads should be more widely recommended in human nutrition.
McMullen, Kevin; Rasmus, C.; Virtue, Melinda; Slik, Kate; Wrigley, Colin
Baking cakes with different recipes can provide an exercise in the application of the scientific method, illustrating the need to vary only one ingredient at a time for correct derivation of conclusions. This experiment, most likely to be performed at home, compares a cake flour with flours from durum wheat, rice and cornflour (gluten-free…
Hot paste obtained by autoclaving (130oC, 20 psi, 20-30 min) a 5-7% (w/w) rice flour or starch slurry was precipitated with ethanol (three extractions) to produce a dry, porous, pregelatinized powder with an average particle size of 75.0µm (flour-derived powder), and 41.6µm (starch-derived powder). ...
Min, Bockki; Lee, Seung Mi; Yoo, Sang-Ho; Inglett, George E; Lee, Suyong
With rising consumer awareness of obesity, the food industry has a market-driven impetus to develop low-fat or fat-free foods with acceptable taste and texture. Fancy buckwheat flour was thus subjected to steam jet-cooking and the performance of the resulting product in cake-baking was evaluated as a fat replacer. Steam jet-cooking caused structural breakdown and starch gelatinization of buckwheat flour, thus increasing its water hydration properties. In the pasting measurements, steam jet-cooked buckwheat flour exhibited high initial viscosity, while no peak viscosity was observed. Also, the suspensions of steam jet-cooked buckwheat flour exhibited shear-thinning behaviors, which were well characterized by the power law model. When shortening in cakes was replaced with steam jet-cooked buckwheat gels, the specific gravity of cake batters significantly increased, consequently affecting cake volume after baking. However, shortening replacement with steam jet-cooked buckwheat up to 20% by weight appeared to be effective in producing cakes as soft as the control without volume loss. When buckwheat flour was thermomechanically modified by steam jet-cooking, it was successfully incorporated into cake formulations for shortening up to 20% by weight, producing low-fat cakes with comparable volume and textural properties to the control. Copyright © 2010 Society of Chemical Industry.
Kim, Hyun-Wook; Setyabrata, Derico; Lee, YongJae; Jones, Owen G; Kim, Yuan H Brad
The objective of this study was to determine the effect of house cricket (Acheta domesticus) flour addition on physicochemical and textural properties of meat emulsion under various formulations. As an initial marker of functionality, protein solubility, water absorption, emulsifying capacity, and gel formation ability of house cricket flour were determined at pH (2 to 10) and NaCl concentrations (0 to 2.10 M). Control emulsion was formulated with 60% lean pork, 20% back fat, and 20% ice. Six treatment emulsions were prepared with replacement of lean pork and/or back fat portions with spray-dried house cricket flour at 5% and 10% levels, based on a total sample weight. The protein solubility of house cricket flour (67 g protein/100 g) was significantly altered depending upon pH (P < 0.0001) and NaCl concentration (P = 0.0421). Similar water absorption capacity, emulsifying capacity, and gel formation ability of house cricket flour were found between 0 and 2.10 M NaCl concentration (P > 0.05). The replacement of lean meat/fat portion with house cricket flour within 10% level could fortify protein and some micronutrients (phosphorus, potassium, and magnesium) in meat emulsion, without negative impacts on cooking yield and textural properties. Our results suggest that house cricket flour can be used as an effective nonmeat functional ingredient to manufacture emulsified meat products. To better utilize house cricket flour as a food ingredient in wide application, understanding its technological properties in various pH, and ionic strength conditions is a pivotal step. Protein solubility of house cricket flour would be considerably affected by the varying pH and NaCl concentrations of applied conventional foods. In the case of meat emulsion, within 10% lean meat and/or fat portions could be successfully substituted with house cricket flour without detectable adverse impacts on technological properties associated with cooking yield and instrumental analysis of texture
Fisher, N; Berry, R; Hardy, J
Male and female Wistar rats were fed for 28 days on a diet containing either chlorinated (1257 or 2506 ppm chlorine) or unchlorinated flour. No significant differences between groups in body weight were observed in the males. A significant inverse correlation between body weight and treatment level, attributable to a corresponding trend in food intakes, was found for the females only. No significant differences between absolute organ weights were found, but when the weights were adjusted for covariance with body weight, dose-related increases in kidney weight (males) and liver weight (both sexes) were found. Histopathological examination revealed no pathological tissue changes attributable to the chlorination of the flour.
Olayiwola, Ibiyemi; Folaranmi, Funmi; Adebowale, Abdul-Rasaq A; Oluseye, Onabanjo; Ajoke, Sanni; Wasiu, Afolabi
The study was conducted to improve cocoyam-based recipes (steamed cocoyam paste [ ebiripo ], ikokore, and fried cocoyam balls [ ojojo ]) using different blends of cocoyam and cowpea flours (100:0, 80:20, 70:30, 60:40, and 50:50). The proximate composition, mineral composition, and sensory qualities of the recipes were determined using standard analytical procedures. The recipes had significantly ( P < 0.05) higher contents of protein, fat, crude fiber, iron, zinc, sodium, and phosphorus compared with the control recipe (100% cocoyam flour). The protein content was highest in all recipes containing 50:50 cocoyam: cowpea flour (10.79%, 10.56%, 10.36% for ojojo, ikokore, and ebiripo , respectively). However, ikokore had higher iron (2.5 mg), phosphorus (92.5 mg), and zinc (1.92 mg) contents than ebiripo and ojojo . While the 80:20 recipe for ebiripo had significantly ( P < 0.05) higher flavor and overall acceptability scores compared with other recipes. In conclusion, enrichment of cocoyam-based recipes with cowpea flour improved the proximate composition, mineral composition, and sensory acceptability of the foods.
The effect of irradiation on some of the physical and chemical properties of wheat flour protein was determined. A study of the baking quality and palatability of an irradiated flour product, yields of crude gluten from irradiated flour, and electrophoretic analyses of some of the protein fractions of irradiated flour were studied. Triangle taste tests indicated that 50000 rep was the dosage level at which the irradiation treatment of flour could be detected in baking powder biscuits. Taste panel scores for color, odor, and baking characteristics of biscuits made with flour treated with 100000 rep or less of ionizing radiation,more » however, were not significantly different from the scores for the control biscuits. An off-odor and darkening in color of the biscuits were readily apparent at a dosage of 500000 rep. The weight of crude gluten extracted from flour was greater from flour exposed to dosages of 1000000 rep or less than from the control flour, but no differences were found in the volumes of the baked balls of crude gluten. This indicates a greater water retention with the irradiated flour. Very small yields of crude gluten at dosages of 3000000 rep or more indicated that definite changes had occurred in the protein structure. Electrophoretic analyses by the moving boundary method were performed on acetic acid extracts of whole flour in a citric acid-disodium phos, phate buffer pH 2.2, ionic strength 0.024. Electrophoretic patterns obtained from the non-irradiated flour indicated that there were at least six separate protein components present, including one which was fast-moving and high in relative concentration, one which was slow-moving and medium high in relative concentration, and four relatively small components. Irradiation of the flour with 300000 rep produced no apparent changes in the electrophoretic patterns obtained, but it 1000000 rep or more, the relative concentrations of the two largest components were changed (the slow-moving one
Wheat flour is one of the world's major food ingredients, but it is difficult to distinguish and identify the many proteins in a flour sample. The abundant glutamine and proline rich gluten proteins are responsible for many of the unique end-use qualities of wheat flour but it is challenging to dis...
Gluten free sugar cookies were made from amaranth (Salvia hispanica L.) and navy bean flours of different ratios. The physical properties of flour blends, dough, and cookies were evaluated. This study found that navy bean and its blends with amaranth had higher water holding capacities (WHC) compare...
Fancy buckwheat flour was thermo-mechanically modified by steam jet-cooking and the resulting product was evaluated as a fat replacer for the use in cakes with reduced-fat content. Steam jet-cooking caused the integrity of buckwheat flour components to be disrupted, significantly changing the physi...
Nawaz, Malik A; Gaiani, Claire; Fukai, Shu; Bhandari, Bhesh
The objectives of this study were to evaluate the ability of X-ray photoelectron spectroscopy (XPS) to differentiate rice macromolecules and to calculate the surface composition of rice kernels and flours. The uncooked kernels and flours surface composition of the two selected rice varieties, Thadokkham-11 (TDK11) and Doongara (DG) demonstrated an over-expression of lipids and proteins and an under-expression of starch compared to the bulk composition. The results of the study showed that XPS was able to differentiate rice polysaccharides (mainly starch), proteins and lipids in uncooked rice kernels and flours. Nevertheless, it was unable to distinguish components in cooked rice samples possibly due to complex interactions between gelatinized starch, denatured proteins and lipids. High resolution imaging methods (Scanning Electron Microscopy and Confocal Laser Scanning Microscopy) were employed to obtain complementary information about the properties and location of starch, proteins and lipids in rice kernels and flours. Copyright © 2016. Published by Elsevier Ltd.
Laurière, Michel; Gorner, Peter; Bouchez-Mahiout, Isabelle; Wrobel, Richard; Breton, Christine; Fabriès, Jean-François; Choudat, Dominique
Aerosol particles which deeply penetrate the human airways and which trigger baker's asthma manifestations are known to represent only a part of flour and of airborne particles found in bakeries. They were a major focus of this study. To this end, aerosols were produced from different wheat and rye flours, using an automatic generator designed for bronchial challenge. Particles were characterized for their size distribution, their ability to be deposited in the airways, their protein content, their histological composition and their reactivity with immunoglobulin E (IgE) present in sera from asthmatic bakers. Like dust particles collected in the bakery, the aerosols produced showed increased protein content but decreased IgE reactive protein content when compared to the corresponding bulk flours. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of these particles showed a predominance of endosperm gluten proteins. Under scanning electron microscopy, flour particles displayed various tissue fragments with entrapped large A-starch and small B- or C-starch granules, whereas aerosol particles appeared primarily as a mixture of the endosperm intracellular interstitial protein matrix and small B- or C-starch granules free or still associated. These observations showed that aerosols supposed to penetrate deeply the airways, mainly correspond to intracellular fragments of endosperm cells enriched in gluten proteins but with lower amount of allergens belonging to albumins or globulins.
Rizzello, Carlo G; Verni, Michela; Koivula, Hanna; Montemurro, Marco; Seppa, Laila; Kemell, Marianna; Katina, Kati; Coda, Rossana; Gobbetti, Marco
Faba bean has gained increasing attention from the food industry and the consumers mainly due to the quality of its protein fraction. Fermentation has been recently recognized as the most efficient tool for improving its nutritional and organoleptic properties. In this study, faba bean flour fermented with Lactobacillus plantarum DPPMAB24W was used to fortify semolina pasta. Pasta samples including different percentages of fermented faba bean flour were produced at the pilot-plant level and characterized using an integrated approach for chemical, nutritional, technological, and sensory features. At a substitution level of 30%, pasta had a more homogeneous texture and lower cooking loss compared to 50% addition. The impact of faba bean flour addition on pasta technological functionality, particularly of the protein fraction, was also assessed by scanning electron microscopy and textural profile analysis. Compared to traditional (semolina) pasta and pasta containing unfermented faba bean flour, the nutritional profile (in vitro protein digestibility and nutritional indexes - chemical score (CS), sequence of limiting essential amino acids, Essential Amino Acid Index (EAAI), Biological Value (BV), Protein Efficiency Ratio (PER), and Nutritional Index (NI)) and the resistant starch content of pasta containing 30% fermented faba bean flour markedly improved, while the starch hydrolysis rate decreased, without negatively affecting technological and sensory features. The use of fermentation technology appears to be a promising tool to enhance the quality of pasta and to promote the use of faba bean flour.
Cahyanti, M. N.; Alfiah, M. N.; Hartini, S.
The objective of the study is to determine the characteristic of moisture sorption isotherm from fermented cassava flour by red yeast rice using various modeling. This research used seven salt solutions and storage temperature of 298K, 303K, and 308K. The models used were Brunauer-Emmet-Teller (BET), Guggenheim-Anderson-de Boer (GAB) and Caurie model. The monolayer moisture content was around 4.51 – 5.99% db. Constant related to absorption heat in the multilayer area of [GAB model was around 0.86-0,91. Constant related to absorption heat in the monolayer area of GAB model was around 4.67-5.97. Constant related to absorption heat in the monolayer area of BET model was around 4.83-7.04. Caurie constant was around 1.25-1.59. The equilibrium and monolayer moisture content on fermented cassava flour by red yeast rice was decreasing as increasing temperature. GAB constant value indicated that the process of moisture absorption on the fermented cassava flour by red yeast rice categorized in type II.
Mondal, Suchismita; Hays, Dirk B; Alviola, Noviola J; Mason, Richard E; Tilley, Michael; Waniska, Ralph D; Bean, Scott R; Glover, Karl D
Gliadins are monomeric proteins that are encoded by the genes at the loci Gli 1 and Gli 2 present on the short arm of homologous wheat chromosomes 1 and 6, respectively. Studies have suggested that gliadins may play an important role in determining the functional properties of wheat flour. The main objective of this study was to understand the functionality of gliadins with respect to tortilla quality. The important tortilla quality attributes are diameter, opacity, and shelf stability, designated here as rollability or the ability to roll or fold the tortilla without cracking. In this study gliadin functionality in tortilla quality was studied using near-isogenic wheat lines that have deletions in either Gli A1, Gli D1, Gli A2, or Gli D2 gliadin loci. The deletion lines are designated by the same abbreviations. Dough and tortillas were prepared from the parent line used to derive these deletion lines, each individual deletion line, and a control commercial tortilla flour. Quantitative and qualitative evaluations were performed on the dough and tortillas derived from the flour from each of these lines. None of the deletions in the gliadin loci altered the shelf stability versus that found for the parent to the deletion lines or control tortilla flour. However, deletions in the Gli 2 loci, in particular Gli A2 reduced the relative proportion of alpha- and beta-gliadins with a greater cysteine amino acid content and gluten cross-link function versus the chain-terminating omega-gliadins in Gli 1, which were still present. As such, the dough and gluten matrix appeared to have greater extensibility, which improved the diameter and overall quality of the tortillas while not altering the rollability. Deletions in the Gli 1 loci had the opposite result with increased cross-linking of alpha- and beta-gliadins, polymeric protein content, and a stronger dough that decreased the diameter and overall quality of the tortillas. The data suggest that altering certain Gli 2 loci
Che, Wenkai; Sun, Laijun; Zhang, Qian; Zhang, Dan; Ye, Dandan; Tan, Wenyi; Wang, Lekai; Dai, Changjun
Azodicarbonamide is wildly used in flour industry as a flour gluten fortifier in many countries, but it was proved by some researches to be dangerous or unhealthy for people and not suitable to be added in flour. Applying a rapid, convenient, and noninvasive technique in food analytical procedure for the safety inspection has become an urgent need. This paper used Vis/NIR reflectance spectroscopy analysis technology, which is based on the physical property analysis to predict the concentration of azodicarbonamide in flour. Spectral data in range from 400 to 2498 nm were obtained by scanning 101 samples which were prepared using the stepwise dilution method. Furthermore, the combination of leave-one-out cross-validation and Mahalanobis distance method was used to eliminate abnormal spectral data, and correlation coefficient method was used to choose characteristic wavebands. Partial least squares, back propagation neural network, and radial basis function were used to establish prediction model separately. By comparing the prediction results between 3 models, the radial basis function model has the best prediction results whose correlation coefficients (R), root mean square error of prediction (RMSEP), and ratio of performance to deviation (RPD) reached 0.99996, 0.5467, and 116.5858, respectively. Azodicarbonamide has been banned or limited in many countries. This paper proposes a method to predict azodicarbonamide concentrate in wheat flour, which will be used for a rapid, convenient, and noninvasive detection device. © 2017 Institute of Food Technologists®.
Amaranth flour containing the essential amino acid, lysine, was composited with oat products that contain ß-glucan known for lowering blood cholesterol and preventing heart disease. The pasting and rheological properties of amaranth-oat composites were evaluated. The amaranth-Nutrim composites showe...
Accumulated grain dust and flour residues in flour mills can potentially decrease the efficacy of contact insecticides used for control of adult and immature stages of stored product insects. A study was conducted to evaluate the effects of flour residues on the efficacy of synergized pyrethrin aero...
Pinciroli, M; Domínguez-Perles, R; Abellán, A; Guy, A; Durand, T; Oger, C; Galano, J M; Ferreres, F; Gil-Izquierdo, A
Phytoprostanes and phytofurans (PhytoPs and PhytoFs, respectively) are nonenzymatic lipid peroxidation products derived from α-linolenic acid (C18:3 n-3), considered biomarkers of oxidative degradation in plant foods. The present work profiled these compounds in white and brown grain flours and rice bran from 14 rice cultivars of the subspecies indica and japonica by ultrahigh performance liquid chromatography coupled to electrospray ionization and triple quadrupole mass spectrometry. For PhytoPs, the average concentrations were higher in rice bran (0.01-9.35 ng g -1 ) than in white and brown grain flours (0.01-1.17 ng g -1 ). In addition, the evaluation of rice flours for the occurrence PhytoFs evidenced average values 1.77, 4.22, and 10.30 ng g -1 dw in rice bran, brown grain flour, and white grain flour, respectively. A significant correlation was observed between total and individual compounds. The concentrations retrieved suggest rice bran as a valuable source of PhytoPs and PhytoFs that should be considered in further studies on bioavailability and bioactivity of such compounds.
Márquez-Castillo, A; Vidal-Quintanar, R L
To improve the shelf life of commercial nixtamalized corn dry masa flour (CMF), the modified atmosphere packaging (MAP) was used. Pouches (20 × 20 cm) of ethyl vinyl alcohol (EVOH) with 180 g of CMF were stored at 55 °C, and a(w) of 0.45; under Light and Dark conditions, antioxidants (0.02% TBHQ), Vacuum, and N(2) and CO(2), and used as treatments. Thereafter, changes in their linoleic acid (LA) concentration by GC, peroxide (PV), and anisidine values (p-A), which were monitored for 180 d. EVOH showed a significantly lower consumption of LA by autoxidation (11.7% ± 0.2% in 117 d) than polyethylene film (70.5% ± 0.3% in 113 d) under the same storage temperature. The elimination of oxygen by vacuum in each pouch allowed a low consumption (16.4% ± 0.1%) of LA. PV (14.5 ± 0.09 mEq/kg of fat), and p-A (63 ± 0.16 mmol/kg) were low, and generated over 121 d of storage. CMF stored under MAP had 100% protection against oxidation of LA. A combination of Vacuum and EVOH packaging extended the shelf life of CMF to 108 d with only 10% of LA loss. For retail stores, the EVOH packaging will reduce lipid oxidation of CMF and safety related to off odors and flavors from the oxidation of tortillas will increase dramatically.
Raikos, Vassilios; Neacsu, Madalina; Russell, Wendy; Duthie, Garry
The demand for products of high nutritional value from sustainable sources is growing rapidly in the global food market. In this study, the effect of pH on the functional properties of lupin, green pea, fava bean, hemp, and buckwheat flours was investigated and compared with wheat flour. Functional properties included solubility, emulsifying and foaming properties, gelling ability, and water holding capacity (WHC). All flours had minimal solubility at pH 4 and their corresponding values increased with increasing pH. Emulsifying properties were improved at pH 10 for all samples and emulsion stability showed a similar trend. Increasing pH in the range 4–10 enhanced the foaming properties of the flours, particularly buckwheat and hemp. Wheat, green pea, buckwheat, and fava bean were more capable of forming firm gels compared with lupin and hemp, as indicated by least gelling concentrations (LGCs). The ranking of the water binding properties of the different types of flours were lupin>hemp>fava bean>buckwheat>green pea>wheat. Results indicate that underutilized flours from sustainable plant sources could be exploited by the food industry as functional food ingredients or as replacements of wheat flour for various food applications. Depending on the application, flour functionality may be effectively tailored by pH adjustment. PMID:25493199
Ačanski, Marijana M; Vujić, Djura N
Gas chromatography with mass spectrometry was used for carrying out a qualitative analysis of the ethanol soluble flour extract of different types of cereals bread wheat and spelt and pseudocereals (amaranth and buckwheat). TMSI (trimethylsilylimidazole) was used as a reagent for the derivatisation of carbohydrates into trimethylsilyl ethers. All samples were first defatted with hexane. (In our earlier investigations, hexane extracts were used for the analysis of fatty acid of lipid components.) Many components of pentoses, hexoses and disaccharides were identified using 73 and 217 Da mass and the Wiley Online Library search. The aim of this paper is not to identify and find new components, but to compare sugar components of tested samples of flour of cereals bread wheat and spelt and pseudocereals (amarnath and buckwheat). Results were analysed using descriptive statistics (dendrograms and PCA). The results show that this method can be used for making a distinction among different types of flour. Copyright © 2013 Elsevier Ltd. All rights reserved.
Segundo, Cristina; Román, Laura; Lobo, Manuel; Martinez, Mario M; Gómez, Manuel
About one-fifth of all bananas harvested become culls that are normally disposed of improperly. However, ripe banana pulp contains significant amounts of fibre and polyphenol compounds as well as a high content of simple sugars (61.06 g/100 g), making it suitable for sucrose replacement in bakery products. This work studied the feasibility of incorporating ripe banana flour (20 and 40% of replacement) in cake formulation. Physical, nutritional and sensory attributes of sponge and layer cakes were evaluated. The inclusion of ripe banana flour generally led to an increased batter consistency that hindered cake expansion, resulting in a slightly lower specific volume and higher hardness. This effect was minimised in layer cakes where differences in volume were only evident with the higher level of replacement. The lower volume and higher hardness contributed to the decline of the acceptability observed in the sensory test. Unlike physical attributes, the banana flour inclusion significantly improved the nutritional properties of the cakes, bringing about an enhancement in dietary fibre, polyphenols and antioxidant capacity (up to a three-fold improvement in antioxidant capacity performance). Therefore, results showed that sugar replacement by ripe banana flour enhanced the nutritional properties of cakes, but attention should be paid to its inclusion level.
Chen, Yao; Stark, Nicole M.; Tshabalala, Mandla A.; Gao, Jianmin; Fan, Yongming
This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF). The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE), acetone/water (AW), and hot water (HW), or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial weathering under accelerated conditions were characterized by Fourier transform infrared (FTIR) spectroscopy, the surface color parameters were analyzed using colorimetry, and the mechanical properties were determined by a flexural test. Weathering of WPC resulted in a surface lightening and a decrease in wood index (wood/HDPE) and flexural strength. WPCs that were reinforced with delignified wood flour showed higher ΔL* and ΔE* values, together with lower MOE and MOR retention ratios upon weathering when compared to those with non-extracted control and extracted WF. PMID:28773732
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Degerminated yellow corn meal. 137.285 Section 137... Cereal Flours and Related Products § 137.285 Degerminated yellow corn meal. Degerminated yellow corn meal, degermed yellow corn meal, conforms to the definition and standard of identity prescribed by § 137.265 for...
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Degerminated yellow corn meal. 137.285 Section 137... Cereal Flours and Related Products § 137.285 Degerminated yellow corn meal. Degerminated yellow corn meal, degermed yellow corn meal, conforms to the definition and standard of identity prescribed by § 137.265 for...
Using an LC-MS method in conjunction with two complementary types of chromatographic retention modes—namely reversed phase and aqueous normal phase (ANP)—various compounds present in mesquite flour extracts were identified. Because of the diverse types of chemical constituents found in such natural ...
Escalante-Aburto, Anayansi; de Dios Figueroa-Cárdenas, Juan; Véles-Medina, José Juan; Ponce-García, Néstor; Hernández-Estrada, Zorba Josué; Rayas-Duarte, Patricia; Simsek, Senay
Little attention has been given to the influence of non-gluten components on the viscoelastic properties of wheat flour dough, bread making process and their products. The aim of this study was to evaluate by creep tests the viscoelastic properties of tablets manufactured from Osborne solubility fractions (globulins, gliadins, glutenins, albumins and residue), pentosans, flour and bread. Hard and soft wheat cultivars were used to prepare the reconstituted tablets. Sintered tablets (except flour and bread) showed similar values to those obtained from the sum of the regression coefficients of the fractions. Gliadins and albumins accounted for about 54% of the total elasticity. Gliadins contributed with almost half of the total viscosity (45.7%), and showed the highest value for the viscosity coefficient of the viscous element. When the effect of dilution was evaluated, the residue showed the highest instantaneous elastic modulus (788.2 MPa). Retardation times of the first element (λ1 3.5 s) were about 10 times lower than the second element (λ2 39.3 s). The analysis of compliance of data corrected by protein content in flour showed that the residue fraction presented the highest values. An important contribution of non-gluten components (starch, albumins and globulins) on the viscoelastic performance of sintered tablets from Osborne fractions, flour and bread was found.
Ciccolini, Valentina; Pellegrino, Elisa; Coccina, Antonio; Fiaschi, Anna Ida; Cerretani, Daniela; Sgherri, Cristina; Quartacci, Mike Frank; Ercoli, Laura
The effect of field foliar Fe and Zn biofortification on concentration and potential bioavailability of Fe and Zn and health-promoting compounds was studied in wholemeal flour of two common wheat varieties (old vs modern). Moreover, the effect of milling and bread making was studied. Biofortification increased the concentration of Zn (+78%) and its bioavailability (+48%) in the flour of the old variety, whereas it was ineffective in increasing Fe concentration in both varieties. However, the old variety showed higher concentration (+41%) and bioavailability (+26%) of Fe than the modern one. As regard milling, wholemeal flour had higher Fe, Zn concentration and health-promoting compounds compared to white flour. Bread making slightly change Fe and Zn concentration but greatly increased their bioavailability (77 and 70%, respectively). All these results are of great support for developing a production chain of enriched functional bread having a protective role against chronic cardio-vascular diseases.
Hart, D J; Fairweather-Tait, S J; Broadley, M R; Dickinson, S J; Foot, I; Knott, P; McGrath, S P; Mowat, H; Norman, K; Scott, P R; Stroud, J L; Tucker, M; White, P J; Zhao, F J; Hurst, R
The retention and speciation of selenium in flour and bread was determined following experimental applications of selenium fertilisers to a high-yielding UK wheat crop. Flour and bread were produced using standard commercial practices. Total selenium was measured using inductively coupled plasma-mass spectrometry (ICP-MS) and the profile of selenium species in the flour and bread were determined using high performance liquid chromatography (HPLC) ICP-MS. The selenium concentration of flour ranged from 30ng/g in white flour and 35ng/g in wholemeal flour from untreated plots up to >1800ng/g in white and >2200ng/g in wholemeal flour processed from grain treated with selenium (as selenate) at the highest application rate of 100g/ha. The relationship between the amount of selenium applied to the crop and the amount of selenium in flour and bread was approximately linear, indicating minimal loss of Se during grain processing and bread production. On average, application of selenium at 10g/ha increased total selenium in white and wholemeal bread by 155 and 185ng/g, respectively, equivalent to 6.4 and 7.1μg selenium per average slice of white and wholemeal bread, respectively. Selenomethionine accounted for 65-87% of total extractable selenium species in Se-enriched flour and bread; selenocysteine, Se-methylselenocysteine selenite and selenate were also detected. Controlled agronomic biofortification of wheat crops for flour and bread production could provide an appropriate strategy to increase the intake of bioavailable selenium. Copyright © 2010 Elsevier Ltd. All rights reserved.
The irradiation of flour (from Western Canadian hard red spring wheat) at its usual moisture level of 12 to 14% with up to 10/sup 6/ rads of Co/sup 60/ gamma rays gave no observable electron paramagnetic resonance (EPR) spectrum. However, after reduction of the moisture contert to 8 or 4%, irradiation resulted in EPR absorption indicating presence of radioinduced free radicals, which were destroyed rapidly in the presence of water vapor. With the irradiated flour kept in a sealed tube, the EPR spectrum faded with time. The fading was quite rapid for the first few days and then proceeded moremore » slowly. Irradiation resulted in a moderate increase in baked bread loaf volume at fairly low radiation dosages, followed by a gradual decrease in loaf volume at higher dosages (0.25 Mrad). Also, loaf volume tended to decrease as the elapsed time between irradiation and baking increased. This finding, when considered with the fading of the EPR spectrum, indicated that the EPR-detectable free radicals in the irradiated flour did not cause a strengthenlng of the gluten to produce an increase in loaf volume, as the radicals disappeared on becoming stable compounds. (H.H.D.)« less
Morreale, Marco; Liga, Antonio; Mistretta, Maria Chiara; Ascione, Laura; La Mantia, Francesco Paolo
The rising concerns in terms of environmental protection and the search for more versatile polymer-based materials have led to an increasing interest in the use of polymer composites filled with natural organic fillers (biodegradable and/or coming from renewable resources) as a replacement for traditional mineral inorganic fillers. At the same time, the recycling of polymers is still of fundamental importance in order to optimize the utilization of available resources, reducing the environmental impact related to the life cycle of polymer-based items. Green composites from biopolymer matrix and wood flour were prepared and the investigation focused on several issues, such as the effect of reprocessing on the matrix properties, wood flour loading effects on virgin and reprocessed biopolymer, and wood flour effects on material reprocessability. Tensile, Dynamic-mechanical thermal (DMTA), differential scanning calorimetry (DSC) and creep tests were performed, pointing out that wood flour leads to an improvement of rigidity and creep resistance in comparison to the pristine polymer, without compromising other properties such as the tensile strength. The biopolymer also showed a good resistance to multiple reprocessing; the latter even allowed for improving some properties of the obtained green composites. PMID:28793656
de Gregorio, Marta; Armentia, Alicia; Díaz-Perales, Araceli; Palacín, Arantxa; Dueñas-Laita, Antonio; Martín, Blanca; Salcedo, Gabriel; Sánchez-Monge, Rosa
Salt-soluble proteins from wheat flour have been described as main allergens associated with both baker's asthma and food allergy. However, most studies have used raw flour as starting material, thus not considering potential changes in allergenic properties induced by the heat treatment and other industrial processing to produce wheat-derived foodstuffs. Salt extracts from different commercial wheat-derived products were obtained and their allergenic properties investigated by IgE-immunodetection, ELISA assays, and skin prick test. The IgE-binding capacity of salt-soluble proteins from commercial breads and cooked pastas was reduced around 50% compared with that of raw flour, the reduction being less dramatic in noncooked pastas and biscuits. Several wheat-derived foodstuffs showed major IgE-binding components of 20 and 35 kDa, identified as avenin-like and globulin proteins, respectively. These proteins, as well as most flour and bread salt-soluble proteins, were hydrolyzed when subjected to simulated gastrointestinal digestion. However, the digested products still exhibited a residual IgE-binding capacity. Therefore, processing of wheat flour to obtain derived foodstuffs decreases the IgE binding-capacity of the major salt-soluble wheat proteins. Moreover, simulated gastric fluid digestion further inactivates some heat-resistant IgE-binding proteins.
Benković, Maja; Belščak-Cvitanović, Ana; Bauman, Ingrid; Komes, Draženka; Srečec, Siniša
Due to abundance in carbohydrates, dietary fibres and bioactive compounds, as well as for its outspread and low prices, carob (Ceratonia siliqua L.) flour has a great potential of use as a functional ingredient. The aim of this study was to analyse this potential by physical and chemical properties assessment of different particle sizes of carob flour with and without seeds. The influence of seed presence on physical and chemical properties of flour was also investigated. Seed presence in carob flour led to higher cohesivity and cake strength. It also affected the extraction efficiency of polyphenols, which was confirmed by the ranking of samples according to their procyanidin and tannins contents. With regard to the carbohydrate content, significant differences (P<0.05) between the contents of fructose and glucose was established in samples differing by the presence of carob seeds. Spearman rank order correlations revealed a significant difference (P<0.05) between physical and chemical properties of carob flours. These findings confirm the importance of understanding physical and chemical properties of carob flours in order to use them efficiently as a functional food ingredient. Copyright © 2017 Elsevier Ltd. All rights reserved.
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Bolted yellow corn meal. 137.280 Section 137.280... Flours and Related Products § 137.280 Bolted yellow corn meal. Bolted yellow corn meal conforms to the definition and standard of identity prescribed by § 137.255 for bolted white corn meal except that cleaned...
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bolted yellow corn meal. 137.280 Section 137.280... Flours and Related Products § 137.280 Bolted yellow corn meal. Bolted yellow corn meal conforms to the definition and standard of identity prescribed by § 137.255 for bolted white corn meal except that cleaned...
Kim, Hyun Jung; White, Pamela J
Two publicly available oat (Avena sativa) lines, "Jim" and "Paul" (5.17 and 5.31% beta-glucan, respectively), and one experimental oat line "N979" (7.70% beta-glucan), were used to study the effect of beta-glucan levels in oat flours during simulated in vitro digestion and fermentation with human fecal flora obtained from different individuals. The oat flours were digested by using human digestion enzymes and fermented by batch fermentation under anaerobic conditions for 24 h. The fermentation progress was monitored by measuring pH, total gas, and short-chain fatty acid (SCFA) production. Significant effects of beta-glucan on the formation of gas and total SCFA were observed compared to the blank without substrate (P < 0.05); however, there were no differences in pH changes, total gas, and total SCFA production among oat lines (P > 0.05). Acetate, propionate, and butyrate were the main SCFA produced from digested oat flours during fermentation. More propionate and less acetate were produced from digested oat flours compared to lactulose. Different human fecal floras obtained from three healthy individuals had similar patterns in the change of pH and the production of gas during fermentation. Total SCFA after 24 h of fermentation were not different, but the formation rates of total SCFA differed between individuals. In vitro fermentation of digested oat flours with beta-glucan could provide favorable environmental conditions for the colon and these findings, thus, will help in developing oat-based food products with desirable health benefits.
Olise, Felix S.; Fernandes, Adriana M.; Cristina Chaves, P.; Taborda, Ana; Reis, Miguel A.
The alleged use of potassium bromate (KBrO3) in bread baking led a few authors to report on the chemical methods for the determination of KBrO3 levels in bread. In order to examine the potentials of a non chemical particle induced X-ray emission (PIXE) method for this purpose, six sets of samples, each composed of flour, dough and bread from a production batch were analysed. The samples were obtained from six different bakers of bread at Ile-Ife, Nigeria. The flour samples were air-dried while others were freeze dried at about -16 °C. The samples were homogenised in an agate mortar and then pelletised. Samples were analysed at the CTN standard PIXE setup and standard procedures for thick target samples analysis were followed. In some samples significant concentrations of bromine were found. In the present work we present possible explanations for the presence of this potentially dangerous contaminant in the samples.
The aim of this study was to develop and compare the properties of edible films based on pinhao starch and pinhao flour. Seven formulations were developed by casting methodology: 5% pinhao starch with 0, 1, 1.5, and 2% glycerol, and 5% pinhao flour with 1, 1.5, and 2% glycerol. The films were evalua...
In the present study, possible effects of the addition of banana flour at different mass fractions (1 and 2%) are investigated on physical (overrun, viscosity), chemical (dry matter, fat and ash content, acidity, pH, water and oil holding capacity and colour), mineral content (Ca, K, Na, P, S, Mg, Fe, Mn, Zn and Ni) and sensory properties of ice cream. Fibre--rich banana pieces were found to contain 66.8 g per 100 g of total dietary fibre, 58.6 g per 100 g of which were insoluble dietary fibre, while 8.2 g per 100 g were soluble dietary fibre. It can be concluded from these results that banana is a valuable dietary fibre source which can be used in food production. Flour obtained from green banana pulp and peel was found to have significant (p<0.05) effect on the chemical composition of ice creams. Sulphur content increased while calcium content decreased in ice cream depending on banana flour content. Sensory results indicated that ice cream sample containing 2% of green banana pulp flour received the highest score from panellists.
Rakita, Slađana; Dokić, Ljubica; Dapčević Hadnađev, Tamara; Hadnađev, Miroslav; Torbica, Aleksandra
The purpose of this research was to gain an insight into the ability of the GlutoPeak instrument to predict flour functionality for bread making, as well as to determine which of the GlutoPeak parameters show the best potential in predicting dough rheological behavior and baking performance. Obtained results showed that GlutoPeak parameters correlated better with the indices of extensional rheological tests which consider constant dough hydration than with those which were performed at constant dough consistency. The GlutoPeak test showed that it is suitable for discriminating wheat varieties of good quality from those of poor quality, while the most discriminating index was maximum torque (MT). Moreover, MT value of 50 BU and aggregation energy value of 1,300 GPU were set as limits of wheat flour quality. The backward stepwise regression analysis revealed that a high-level prediction of indices which are highly affected by protein content (gluten content, flour water absorption, and dough tenacity) was achieved by using the GlutoPeak indices. Concerning bread quality, a moderate prediction of specific loaf volume and an intense level prediction of breadcrumb textural properties were accomplished by using the GlutoPeak parameters. The presented results indicated that the application of this quick test in wheat transformation chain for the assessment of baking quality would be useful. Baking test is considered as the most reliable method for assessing wheat-baking quality. However, baking test requires trained stuff, time, and large sample amount. These disadvantages have led to a growing demand to develop new rapid tests which would enable prediction of baked product quality with a limited flour size. Therefore, we tested the possibility of using a GlutoPeak tester to predict loaf volume and breadcrumb textural properties. Discrimination of wheat varieties according to quality with a restricted flour amount was also examined. Furthermore, we proposed the limit
Guo, Xiao-Xi; Hu, Wei; Liu, Yuan; Gu, Dong-Chen; Sun, Su-Qin; Xu, Chang-Hua; Wang, Xi-Chang
Fluorescent brightener, industrial whitening agent, has been illegally used to whitening wheat flour. In this article, computer vision technology (E-eyes) and colorimetry were employed to investigate color difference among different concentrations of fluorescent brightener in wheat flour using DMS as an example. Tri-step infrared spectroscopy (Fourier transform-infrared spectroscopy coupled with second derivative infrared spectroscopy (SD-IR) and two dimensional correlation infrared spectroscopy (2DCOS-IR)) was used to identify and quantitate DMS in wheat flour. According to color analysis, the whitening effect was significant when added with less than 30 mg/g DMS but when more than 100 mg/g, the flour began greenish. Thus it was speculated that the concentration of DMS should be below 100 mg/g in real flour adulterant with DMS. With the increase of the concentration, the spectral similarity of wheat flour with DMS to DMS standard was increasing. SD-IR peaks at 1153 cm-1, 1141 cm-1, 1112 cm-1, 1085 cm-1 and 1025 cm-1 attributed to DMS were regularly enhanced. Furthermore, it could be differentiated by 2DOS-IR between DMS standard and wheat flour added with DMS low to 0.05 mg/g and the bands in the range of 1000-1500 cm-1 could be an exclusive range to identify whether wheat flour contained DMS. Finally, a quantitative prediction model based on IR spectra was established successfully by Partial least squares (PLS) with a concentration range from 1 mg/g to 100 mg/g. The calibration set gave a determination coefficient of 0.9884 with a standard error (RMSEC) of 5.56 and the validation set presented a determination coefficient of 0.9881 with a standard error of 5.73. It was demonstrated that computer vision technology and colorimetry were effective to estimate the content of DMS in wheat flour and the Tri-step infrared macro-fingerprinting combined with PLS was applicable for rapid and nondestructive fluorescent brightener identification and quantitation.
Sunarmani; Setyadjit; Ermi, S.
Ongol-ongol is for food diversification by mixing composite flour of taro, banana and mung bean, then was steamed by hot air. The purpose of this study was to find out the optimum way to produce ‘ongol-ongol’ from composite flour and to know the storage life by prediction method. The research consisted of two stages, namely the determination of the optimum formula of ‘ongol-ongol’ with Design Expert DX 8.1.6 software and the estimation of product shelf life of the optimum formula by ASLT (Accelerated Shelf Life Test) method. The optimum formula of the steamed meal was produced from composite flour and arenga flour with ratio of 50: 50 and flour to water ratio of 1: 1. The proximate content of steamed meal of optimum formula is 36.53% moisture content, ash content of 1,36%, fat content of 14.48%, protein level of 28.5%, and carbohydrate of 44.77% (w/w). Energy Value obtained from 100 g of ‘ongol-ongol’ was 320.8 Kcal. Recommended for steamed meal storage life is 12.54 days at ambient temperature.
Nogueira, Amanda C; Sehn, Georgia A R; Rebellato, Ana Paula; Coutinho, Janclei P; Godoy, Helena T; Chang, Yoon K; Steel, Caroline J; Clerici, Maria Teresa P S
Yellow sweet potato is mostly produced by small farmers, and may be a source of energy and carotenoids in the human diet, but it is a highly perishable crop. To increase its industrial application, yellow sweet potato flour has been produced for use in bakery products. This study aimed to evaluate the technological quality and the carotenoids content in sweet breads produced with the replacement of wheat flour by 0, 3, 6, and 9% yellow sweet potato flour. Breads were characterized by technological parameters and β-carotene levels during nine days of storage. Tukey's test (p<0.05) was used for comparison between means. The increase in yellow sweet potato flour concentrations in bread led to a decrease of specific volume and firmness, and an increase in water activity, moisture, orange coloring, and carotenoids. During storage, the most significant changes were observed after the fifth day, with a decrease in intensity of the orange color. The β-carotene content was 0.1656 to 0.4715 µg/g in breads with yellow sweet potato flour. This work showed a novel use of yellow sweet potato in breads, which brings benefits to consumers' health and for the agricultural business.
Alkarkhi, Abbas F M; Ramli, Saifullah Bin; Easa, Azhar Mat
Major (sodium, potassium, calcium, magnesium) and minor elements (iron, copper, zinc, manganese) and one heavy metal (lead) of Cavendish banana flour and Dream banana flour were determined, and data were analyzed using multivariate statistical techniques of factor analysis and discriminant analysis. Factor analysis yielded four factors explaining more than 81% of the total variance: the first factor explained 28.73%, comprising magnesium, sodium, and iron; the second factor explained 21.47%, comprising only manganese and copper; the third factor explained 15.66%, comprising zinc and lead; while the fourth factor explained 15.50%, comprising potassium. Discriminant analysis showed that magnesium and sodium exhibited a strong contribution in discriminating the two types of banana flour, affording 100% correct assignation. This study presents the usefulness of multivariate statistical techniques for analysis and interpretation of complex mineral content data from banana flour of different varieties.
Sebio, L; Chang, Y K
Raw yam (Dioscorea rotundata) flour was cooked and extruded in a Brabender single-screw laboratory scale extruder. Response surface methodology using an incomplete factorial design was applied with various combinations of barrel temperature [100, 125, 150 degrees C], feed moisture content [18, 22, 26%] and screw speed [100, 150, 200 rpm]. Initial viscosity at 30 degrees C, water solubility index, expansion and hardness were determined. The highest values of initial viscosity were at the highest barrel temperatures and the highest moisture contents. At high feed moisture content and high barrel temperatures the yam extrudate flour showed the greatest values of water solubility index. The physical properties of the extruded product showed that at high temperature the lower the moisture content the greater the expansion index. Hardness was influenced directly by moisture content and inversely by extrusion temperature. The extrusion of yam flour led to the production of snacks and pre-gelatinized flours of diverse properties. Also extruded yam flour can be successfully used in the preparation of 'futu' (pre-cooked compact dough), a yam-based food, popular in Western Africa.
Baxter, Graeme; Zhao, Jian; Blanchard, Christopher
Salinity is one of the major threats to production of rice and other agricultural crops worldwide. Although numerous studies have shown that salinity can severely reduce rice yield, little is known about its impact on the chemical composition, processing and sensory characteristics of rice. The objective of the current study was to investigate the effect of salinity on the pasting and textural properties of rice flour as well as on the protein content and composition of rice endosperm. Rice grown under saline conditions had significantly lower yields but substantially higher protein content. The increase in protein content was mainly attributed to increases in the amount of glutelin, with lesser contributions from albumin. Salinity also altered the relative proportions of the individual peptides within the glutelin fraction. Flours obtained from rice grown under saline conditions showed significantly higher pasting temperatures, but lower peak and breakdown viscosities. Rice gels prepared from the flour showed significantly higher hardness and adhesiveness values, compared to the freshwater controls. Salinity can significantly affect the pasting and textural characteristics of rice flour. Although some of the effects could be attributed to changes in protein content of the rice flour, especially the increased glutelin level, the impact of salinity on the physicochemical properties of rice is rather complex and may involve the interrelated effects of other rice components such as starch and lipids. Copyright © 2011 Society of Chemical Industry.
Grünwald, Stefanie; Niedermeier, Janine; Wenzel, Uwe
Charred foods are generally suspected to exert health threats by providing toxicants, such as acrylamide or polycyclic aromatic hydrocarbons. Using the red flour beetle Tribolium castaneum as a model organism, we tested its survival under heat stress in response to feeding charred toast. Survival of beetles was measured at 42 °C after a pre-feeding phase with flour enriched with increasing concentrations of charred toast. In order to assess the influence of key transcription factors for phase-I and phase-II xenobiotic metabolism, gene homologs for ahr and nrf-2, respectively, were knocked down by the use of RNA interference (RNAi). Beetles fed only charred toast died off much earlier than control beetles fed on flour, whereas beetles fed flour enriched with 5% charred toast survived significantly longer than the control. Both, ahr and nrf-2 proved essential in order to enable the increase in survival by the feeding of 5% charred toast. Moreover, functional loss of ahr and nrf-2 made the beetles hypersensitive versus the feeding of 100% charred toast. Finally, at the transcriptional level, it was shown that RNAi for ahr blocked the inducing activities of charred toast on nrf-2. Our studies suggest a hormetic response of the red flour beetle to feeding of charred toast that causes an increased stress resistance through the activation of ahr and nrf-2. Those adaptations, however, are saturable and accordingly the hormetic effects at increasing concentrations of the toxicants become expended.
Yuksel, Ayse Nur; Öner, Mehmet Durdu; Bayram, Mustafa
Couscous is produced traditionally by agglomeration of Triticum durum semolina with water. The aims of this study were: to produce couscous-like product by substitution of semolina with bulgur by-product (undersize bulgur); to find optimum quantity of bulgur flour and processing conditions. In order to determine the optimum processing parameters and recipes; 0, 25 and 50% of bulgur containing couscous-like samples were prepared. The color, yield, sensory properties, total phenol and flavonoid contents, bulk density, protein and ash content, texture properties were determined. Two different types of dryer e.g. packed bed and microwave were used. Optimum parameters were predicted as 50% of bulgur flour for packed bed (60 °C) and microwave (180 W) drying with 50% (w/w) of water according to yields, color (L*, a*, b*) values and sensory properties (color, odor, general appearance). For packed bed drying at 60 °C yields were 54.28 ± 3.78, 47.70 ± 1.73 and 52.57 ± 7.04% for 0, 25 and 50% bulgur flour containing samples, respectively. Lightness (L*) values of couscous-like samples were decreased with increasing the quantity of bulgur flour after both drying processes. Results of sensory analysis revealed that couscous-like bulgur were more preferable for consumers.
Bisharat, G I; Lazou, A E; Panagiotou, N M; Krokida, M K; Maroulis, Z B
Phenolic content, antioxidant activity and sensory characteristics of vegetable-enriched extrudates were investigated as a result of extrusion conditions, including extrusion temperature (140-180 °C), screw rotation speed (150-250 rpm) and feed moisture content (14-19 % w.b.). Broccoli flour and olive paste was used in mixtures with corn flour at a ratio of 4 to 10 % (broccoli/corn) and 4 to 8 % (olive paste/corn). A simple power model was developed for the prediction of phenolic content and antioxidant activity of extrudates by extrusion conditions and feed composition. Phenolic content and antioxidant activity of broccoli enriched extrudates increased with extrusion temperature and broccoli addition and decreased with feed moisture content. The antioxidant activity of olive paste extrudates increased with material ratio and decreased with feed moisture content and screw rotation. Sensory porosity, homogenous structure, crispness, cohesiveness and melting decreased with feed moisture content, while the latter increased the mealy flavor and hardness of extrudates. Acceptable snacks containing broccoli flour or olive paste can be produced by selecting the appropriate process conditions.
Okpala, Laura; Okoli, Eric; Udensi, Emelem
Cookies were produced from germinated pigeon pea, fermented sorghum, and cocoyam flour (CF) blends to determine their potentials in cookie manufacture. Ten flour formulations were produced and they were evaluated for their proximate and functional properties. Protein content ranged from 4.85% to 19.89% with 100% CF (100CF) having the least value, while 100% germinated pigeon pea flour (100GPF) had the highest value. Increase in levels of GPF to the flour blends resulted in increase in protein content of the blends. Cookies made with 100% fermented sorghum flour (100FSF) had the highest ash content of 2.73%, while cookies made with 100GPF had the least ash content. Energy values of the cookies ranged between 369.37 and 376.56 kcal/100 g, with cookie formulation 50%CF:50%FSF having the least value and cookies made with 16.7%CF:16.7%FSF:66.6GPF having the highest value. The control (cookies made with wheat) had the highest spread ratio of 24.13, while cookies made with 100FSF had the least spread ratio of 14.97. Cookies made with 100CF were the least fragile. Sensory ratings revealed that cookies containing up to 50% CF and above, compared favorably with those made with wheat flour.
Bronder, Kayla L; Zimmerman, Sarah L; van den Wijngaart, Annoek; Codling, Karen; Johns, Kirsten Ag; Pachón, Helena
Consumption of foods made with wheat flour, particularly instant noodles, is increasing in Asia. Given this trend, fortifying wheat flour with vitamins and minerals may improve micronutrient intake in the region. The objective of this review was to understand what is known about fortifying wheat flour used to make instant noodles. A literature review of seven databases was performed using the search terms "noodle" and ("Asian" or "instant"). Grey literature was requested through a food fortification listserv. Articles were title screened first for relevance and duplicity, with exclusion criteria applied during the second round of abstract-level screening. This review considered studies examining simulation, retention, sensory, bioavailability, efficacy, and effectiveness of instant noodles made with fortified wheat flour. Fourteen relevant documents were reviewed for simulation (n=1), retention (n=11), and sensory studies (n=3). The documents revealed that instant noodles produced from fortified wheat flour have potential to improve nutrient intakes, have high retention of most nutrients, and provoke no or minimal changes in sensory characteristics. The available literature indicates that using fortified wheat flour for instant noodle production results in retention of the added nutrients, except thiamin, with no significant sensory change to the final product. Given the rising consumption of instant noodles, production of this item with fortified wheat flour has potential to improve nutrient intakes in Asia. This review provides a resource for the design of a wheat flour fortification program in countries where a large proportion of wheat flour is consumed as instant noodles.
Casarotti, Sabrina N; Carneiro, Bruno M; Penna, Ana Lúcia B
In this work, we investigated the effect of supplementing fermented milk with quinoa flour as an option to increase probiotic activity during fermented milk production and storage. Fermented milk products were produced with increasing concentrations of quinoa flour (0, 1, 2, or 3g/100g) and submitted to the following analyses at 1, 14, and 28 d of refrigerated storage: postacidification, bacterial viability, resistance of probiotics to simulated gastrointestinal (GI) conditions, and adhesion of probiotics to Caco-2 cells in vitro. The kinetics of acidification were measured during the fermentation process. The time to reach maximum acidification rate, time to reach pH 5.0, and time to reach pH 4.6 (end of fermentation) were similar for all treatments. Adding quinoa flour had no effect on fermentation time; however, it did contribute to postacidification of the fermented milk during storage. Quinoa flour did not affect counts of Bifidobacterium animalis ssp. lactis BB-12 or Lactobacillus acidophilus La-5 during storage, it did not protect the probiotic strains during simulated GI transit, and it did not have a positive effect on the adhesion of probiotic bacteria to Caco-2 cells in vitro. Additionally, the adhesion of strains to Caco-2 cells decreased during refrigerated storage of fermented milk. Although the addition of up to 3% quinoa flour had a neutral effect on probiotic activity, its incorporation to fermented milk can be recommended because it is an ingredient with high nutritive value, which may increase the appeal of the product to consumers. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Firdaus, Muhamad; Yahya; Raditya Hardany Nugraha, Galih; Dwi Utari, Dyah
Pasta is a nutritious and energy product which produced from the dough of wheat flour and water. It contains less of iodine and high of glycemic index. Euchema cottonii belongs of red seaweed is food substance that contains much of iodine and dietary fiber. The objective of this study was to know the fortification effect of E. cottonii flour on the nutrition, iodine, and glycemic index of pasta. E. cottonii was collected from the culture farm of E. cottonii on the Wongsorejo beach, District of Banyuwangi, East Java on April-June 2015. Wheat flour and pasta ingredients were obtained locally at shops of Pasar Besar, Malang. Pasta was produced by weighing of components, mixing, dough, milling, steaming and drying. E. cottonii flour was added on mixing process at 0; 7; 14 and 21 % of ingredients. The parameter of this study was the level of water, lipid, protein, ash, and carbohydrate (by difference), iodine, crude fiber, the total of dietary fiber, soluble fiber, insoluble fiber, and glycemic index, respectively. Data were analyzed by variance and the least square difference used to determine the difference between treatments. The highest concentration group showed more nutritious than other treatments. The characters of its product were water 6.70%, lipid 2.26%, protein 23.09%, ash 14.11%, carbohydrate 53.84%, iodine 3.71 ppm, crude fiber 8.02%, the total of dietary fiber 20.88%, soluble fiber 11.69%, insoluble fiber 9.19%, and glycemic index 44.45, respectively. In conclusion, the fortification of E. cottonii flour enhances the nutrition value, iodine content, and glycemic index of pasta.
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Self-rising yellow corn meal. 137.290 Section 137... Cereal Flours and Related Products § 137.290 Self-rising yellow corn meal. Self-rising yellow corn meal conforms to the definition and standard of identity prescribed by § 137.270 for self-rising white corn meal...
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Self-rising white corn meal. 137.270 Section 137... Cereal Flours and Related Products § 137.270 Self-rising white corn meal. (a) Self-rising white corn meal is an intimate mixture of white corn meal, sodium bicarbonate, and one or both of the acid-reacting...
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Self-rising white corn meal. 137.270 Section 137... Cereal Flours and Related Products § 137.270 Self-rising white corn meal. (a) Self-rising white corn meal is an intimate mixture of white corn meal, sodium bicarbonate, and one or both of the acid-reacting...
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Self-rising yellow corn meal. 137.290 Section 137... Cereal Flours and Related Products § 137.290 Self-rising yellow corn meal. Self-rising yellow corn meal conforms to the definition and standard of identity prescribed by § 137.270 for self-rising white corn meal...
Obadina, Adewale O; Arogbokun, Christianah A; Soares, Antonio O; de Carvalho, Carlos Wanderlei Piler; Barboza, Henriqueta Talita; Adekoya, Ifeoluwa O
The effect of malting periods on the nutritional composition and physico-chemical properties of flour from pearl millet (Ex-Borno) variety was evaluated. Grains were steeped at 25 °C for 24 h and germinated for different durations (12, 24, 36, 48, 60, 72, 84 and 96 h) before kilning at 55 °C for 18 h. The kilned seeds were devegetated, milled, sieved and analysed for their proximate composition, amino acid composition, total phenolic content, functional and pasting properties. The carbohydrate, fat and total phenolic contents of the pearl millet flour samples decreased while protein content increased with increased malting periods. Leucine was the dominant amino acid in the flour and 48 h-malted flour had the highest total amino acid (6.72). Peak viscosity significantly decreased as the malting period increased. Solubility index, pasting temperature and phenolic content of the flours ranged from 5.13 to 17.24%, 69.05 to 89.5 °C and 130.20 to 169.90 mg/100 g, respectively. Malting offers a means of improving the nutritional profile of Ex-Borno pearl millet flour with an increased protein and fibre and reduced fat content. Malting also enhanced the functional and pasting properties of the flour.
Wandee, Yuree; Uttapap, Dudsadee; Puncha-arnon, Santhanee; Puttanlek, Chureerat; Rungsardthong, Vilai; Wetprasit, Nuanchawee
Canna starch and its derivatives (retrograded, retrograded debranched, and cross-linked) were evaluated for their suitability to be used as prebiotic sources in a rice noodle product. Twenty percent of the rice flour was replaced with these tested starches, and the noodles obtained were analyzed for morphology, cooking qualities, textural properties, and capability of producing short-chain fatty acids (SCFAs). Cross-linked canna starch could increase tensile strength and elongation of rice noodles. Total dietary fiber (TDF) content of noodles made from rice flour was 3.0% and increased to 5.1% and 7.3% when rice flour was replaced with retrograded and retrograded debranched starches, respectively. Cooking qualities and textural properties of noodles containing 20% retrograded debranched starch were mostly comparable, while the capability of producing SCFAs and butyric acid was superior to the control rice noodles; the cooked noodle strips also showed fewer tendencies to stick together. Copyright © 2015 Elsevier Ltd. All rights reserved.
Lin, Lufen; Huang, Luelue; Fan, Daming; Hu, Bo; Gao, Yishu; Lian, Huizhang; Zhao, Jianxin; Zhang, Hao; Chen, Wei
The relationships between radical generation under microwave irradiation and the components of various types of rice flour were investigated. Electron paramagnetic resonance (EPR) spectroscopy was used to characterize the radicals found in rice flour samples. The EPR spectra revealed that several types of radical (carbon-centered, tyrosyl and semiquinone) were localized in the starch and protein fractions of the rice flour. The signal intensity of the free radicals was observed to increase exponentially with increasing microwave power and residence time. The rice bran samples exhibited the greatest free radical signal intensity, followed by the brown rice samples and the white rice samples. This finding was consistent for both the native and the microwaved samples. The ratio of rice starch to rice protein also played an important role in the generation of radicals. Copyright © 2016 Elsevier B.V. All rights reserved.
Manikantan, M R; Sharma, Rajiv; Yadav, D N; Gupta, R K
The present work was undertaken to study the effect of pearling duration, soaking time, steaming duration and drying temperature on the quality of sesame seeds and mechanically extracted partially defatted sesame cake. On the basis of quality attributes i.e. high protein, low crude fibre, low residual oil and low oxalic acid, the optimum process parameters were selected. The combination of 20 min of pearling duration, 15 min of soaking, 15 min of steaming at 100 kPa pressure and drying at 50 °C yielded high quality partially defatted protein rich sesame flour as compared to untreated defatted sesame flour. The developed high quality partially defatted protein rich sesame flour may be used in various food applications as a vital ingredient to increase the nutritional significance of the prepared foodstuffs.
Budi, Faleh Setia; Hariyadi, Purwiyatno; Budijanto, Slamet; Syah, Dahrul
Rice analogues are food products made of broken rice and/or any other carbohydrate sources to have similar texture and shape as rice. They are usually made by hot extrusion processing. The hot extrusion process may change the crystallinity of starch and influence the characteristic of rice analogues. Therefore, this research aimed to study the effect of moisture content of incoming dough and temperature of extrusion process on the crystallinity and hardness of resulting rice analogues. The dough's were prepared by mixing of corn starch-flour with ratio 10/90 (w/w) and moisture content of 35%, 40% and 45% (w/w) and extrusion process were done at temperature of 70, 80, 90°C by using of twin screw extruder BEX-DS-2256 Berto. The analyses were done to determine the type of crystal, degree of crystallinity, and hardness of the resulting rice analogues. Our result showed that the enhancement of extrusion temperature from 70 - 90°C increased degree of crystallinity from 5.86 - 15.00% to 10.70 - 18.87% and hardness from 1.71 - 4.36 kg to 2.05 - 5.70 kg. The raising of dough moisture content from 35 - 45% decreased degree of crystallinity from 15.00 - 18.87% to 5.86 - 10.70% and hardness from 4.36 - 5.70 kg to 1.71 - 2.05 kg. The increase of degree of crystallinity correlated positively with the increase of hardness of rice analogues (r = 0.746, p = 0.05).
9. FLOOR 1: FLOUR BOLTER, REEL IN PLACE BUT CLOTH MISSING: LAYSHAFT WHICH FORMERLY DROVE BOLTER IS STORED AGAINST WALL - Windmill at Water Mill, Montauk Highway & Halsey Lane, Water Mill, Suffolk County, NY
Nadhirah, A. A.; Sam, S. T.; Noriman, N. Z.; Ragunathan, S.; Ismail, H.
This study investigate about the tensile and morphological properties of degradable polymer produced from linear low density polyethylene/rambutan peel flour (LLDPE/RPF) blends and adipic acid (AA) was used as a compatibilizer by varying the rambutan peel flour (RPF) amount from 0-25wt%. The samples were subjected to tensile and morphological tests. AA compatibilized showed higher strength compared to uncompatibilized blends. The Young's modulus for LLDPE/RPF blends increased with increasing flour content. However, the addition of adipic acid had reduced the Young's Modulus.
Rosenbaum, J. G.; Reynolds, R. L.
Sediments in Bear Lake (UT/ID) and Upper Klamath Lake (OR) contain glacial flour derived during the last glacial interval from the Uinta Mountains and the southern Cascade Range, respectively. Magnetic properties provide measures of glacial-flour content and, in concert with elemental and grain-size analyses, yield high-resolution records of glacial growth and decay. Creation and preservation of such records requires that (1) properties of glacial flour contrast with those of other sedimentary components and (2) magnetic minerals are neither formed nor destroyed after deposition. In the Bear Lake watershed, glaciers were confined to a small headwater area of the Bear River underlain by hematite-rich rocks of the Uinta Mountain Group (UMG), which are not exposed elsewhere in the catchment. Because UMG detritus is abundant only in Bear Lake sediments of glacial age, hard isothermal remanent magnetization (a measure of hematite content) provides a proxy for glacial flour. In contrast, the entire Upper Klamath Lake catchment, which lies to the east of the Cascade Range in southern Oregon, is underlain largely by basalt and basaltic andesite. Magnetic properties of fresh titanomagnetite-rich rock flour from glaciers on a composite volcano contrast sharply with those of detritus from unglaciated areas in which weathering destroyed some of the titanomagnetite. Ideally, well-dated records of the flux of glacial flour can be compared to ages of glacial features (e.g., moraines). For Upper Klamath Lake, quantitative measures of rock-flour content (from magnetic properties) and excellent chronology allow accurate calculation of flux. However, ages of glacial features are lacking and mafic volcanic rocks, which weather rapidly in this environment, are not well suited for cosmogenic exposure dating. At Bear Lake, estimates of glacial-flour content are less quantitative and chronology within the glacial interval must be interpolated from radiocarbon ages above and below the
Shelenkov, P. G.; Pantyukhov, P. V.; Popov, A. A.
Recently, there is a great interest in the world to biodegradable materials based on synthetic polymers in a composition with natural fillers. Highly filled polymer composite materials based on various grades of synthetic block copolymer of ethylene vinyl acetate with wood flour were under investigation. Five grades of ethylene-vinyl acetate copolymer differing in the content of vinyl acetate groups and a melt flow index were used in this work in order to find the best one for highly filled biocomposites. Wood flour content in biocomposites was 50, 60, 70 weight %. The rheological and physico-mechanical characteristics of the resulting biocomposites were studied.
Pareyt, Bram; Delcour, Jan A
Much research has been done to understand the contribution of different flour constituents to the cookie quality. Most authors agree on the role of starch in cookies, which, although it is the main flour constituent, has a relatively small influence on cookie quality. Flour proteins, which are quantitatively less important than starch, seem to have a more pronounced role in cookie baking. However, in literature, there is no consensus about their role and influence on the product quality. As for starch, there is much more agreement about the role of non-starch polysaccharides and flour lipids. Not only flour, but also other ingredients of the cookie (dough) formula, such as shortening (fat), sugar, and water are important for the quality of the end product. We here provide the different points of view in this area and speculate on the functionality and quality determining properties of flour constituents, sugar, fat, and water and their role and influence during the different stages of cookie baking and on the end quality of sugar-snap cookies.
Kostekli, Mine; Karakaya, Sibel
In this study trypsin (TIA) and chymotrypsin inhibitory (CIA) activities were determined in the extracts of wheat, rye mix, mixed cereals and, whole wheat flours and, breads made with these flours. In addition, effects of fermentation, baking and in vitro digestion on TIA and CIA were studied. Whole wheat flour, dough, and bread did not show any TIA. Other flours displayed TIA. Contrary to, all flours, doughs, and breads exhibited CIA. Although TIA was not detected in the protein extracts obtained from wheat and rye mix breads, protein extract of rye mix flour exhibited TIA. Following in vitro digestion process, TIA of wheat bread was found as 5.91units/mL gastric dialysate and 9.17units/mL intestine dialysate. CIA was determined in dialysates obtained from wheat (2.12CI/mL and 3.78CI/mL for gastric and intestinal dialysate respectively) and rye breads (4.16CI/mL and 2.46CI/mL for gastric and intestinal dialysate respectively). Copyright © 2016 Elsevier Ltd. All rights reserved.
de Simas, Karina N; Vieira, Leila do N; Podestá, Rossana; Vieira, Manoela A; Rockenbach, Ismael I; Petkowicz, Carmen L O; de Deus Medeiros, João; de Francisco, Alícia; Amante, Edna R; Amboni, Renata D M C
The objective of this research was to evaluate the chemical composition, microstructure, and antioxidant capacity of king palm flour obtained from residues from organic king palm (Archontophoenix alexandrae) processing. King palm flour exhibited high levels of dietary fibre (70.85%) and total ash (3.27%); low contents of protein (3.51%) and lipid (0.91%). Iron, magnesium, calcium and potassium contents were 7.31, 517.03, 801.33 and 1041.95 mg/100g, respectively. The high concentration of glucose, xylose and arabinose suggests the presence of some polysaccharides, such as cellulose and hemicelluloses (xyloglucans and arabinoxylans). Methanol and aqueous extracts of king palm flour showed 1.27 and 0.95 mg/g (Gallic Acid Equivalents) of total polyphenols, respectively. Methanol extract yielded the best antioxidant activity in the 2,2-diphenyl-1-picrylhydrazyl (DPPH()) and 2,2'-azino-di(3-ethylbenzthiazoline sulphonate) (ABTS()(+)) methods. The micrographs of leaf sheath showed the presence of druses, which are characterized as calcium oxalate deposition, contributing to the calcium content in king palm flour. The presence of primary and secondary cell walls lignified in leaf sheath contributed to high levels of dietary fibre detected in king palm flour. Copyright (c) 2010 Elsevier Ltd. All rights reserved.
Doud, C W; Phillips, T W
Studies were conducted at two flour mills where male Indian meal moths, Plodia interpunctella (Hübner), were captured using pheromone-baited traps. Objectives were to determine the distribution of male P. interpunctella at different locations in and around the mills throughout the season, and to monitor moth activity before and after one of the mills was fumigated with methyl bromide to assess efficacy of treatment. Commercially available sticky traps baited with the P. interpunctella sex pheromone were placed at various locations outside and within the larger of the two mills (mill 1). Moths were captured inside mill 1 after methyl bromide fumigations. The highest numbers of P. interpunctella were caught outside the facility and at ground floor locations near outside openings. Additional traps placed in the rooms above the concrete stored-wheat silos at mill 1 during the second year captured more moths than did traps within the mill's production and warehouse areas. In another study, moths were trapped at various distances from a smaller flour mill (mill 2) to determine the distribution of moths outdoors relative to the mill. There was a negative correlation between moth capture and distance from the facility, which suggested that moth activity was concentrated at or near the flour mill. The effectiveness of the methyl bromide fumigations in suppressing moth populations could not be assessed with certainty because moths captured after fumigation may have immigrated from outside through opened loading bay warehouse doors. This study documents high levels of P. interpunctella outdoors relative to those recorded inside a food processing facility. Potential for immigration of P. interpunctella into flour mills and other stored product facilities from other sources may be greater than previously recognized. Moth entry into a food processing facility after fumigation is a problem that should be addressed by pest managers.
Oliveira, Kênia Grasielle de; Queiroz, Valéria Aparecida Vieira; Carlos, Lanamar de Almeida; Cardoso, Leandro de Morais; Pinheiro-Sant'Ana, Helena Maria; Anunciação, Pamella Cristine; Menezes, Cícero Beserra de; Silva, Ernani Clarete da; Barros, Frederico
This study evaluated the effect of storage temperature (4, 25 and 40°C) and time on the color and contents of 3-deoxyanthocyanins, total anthocyanins, total phenols and tannins of sorghum stored for 180days. Two genotypes SC319 (grain and flour) and TX430 (bran and flour) were analyzed. The SC319 flour showed luteolinidin and apigeninidin contents higher than the grain and the TX430 bran had the levels of all compounds higher than the flour. The storage temperature did not affect most of the analyzed variables. The content of most of the compounds reduced during the first 60days when they became stable. At day 180, the retention of the compounds in the genotypes SC319 and TX430 ranged from 56.1-77.9% and 67.3-80.1% (3-deoxyanthocyanins), 88.4-93.8% and 84.6-96.8% (total anthocyanins) and 86.7-86.8 and 89.4-100% (phenols) respectively. The retention of tannins ranged from 56.6 to 85.3%. The color of samples remained stable for 120days. Copyright © 2016 Elsevier Ltd. All rights reserved.
Summary In the present study, possible effects of the addition of banana flour at different mass fractions (1 and 2%) are investigated on physical (overrun, viscosity), chemical (dry matter, fat and ash content, acidity, pH, water and oil holding capacity and colour), mineral content (Ca, K, Na, P, S, Mg, Fe, Mn, Zn and Ni) and sensory properties of ice cream. Fibre--rich banana pieces were found to contain 66.8 g per 100 g of total dietary fibre, 58.6 g per 100 g of which were insoluble dietary fibre, while 8.2 g per 100 g were soluble dietary fibre. It can be concluded from these results that banana is a valuable dietary fibre source which can be used in food production. Flour obtained from green banana pulp and peel was found to have significant (p<0.05) effect on the chemical composition of ice creams. Sulphur content increased while calcium content decreased in ice cream depending on banana flour content. Sensory results indicated that ice cream sample containing 2% of green banana pulp flour received the highest score from panellists. PMID:27904363
Eneche, E H
Biscuits were produced from millet flour (MF) and pigeon pea flour (PPF) blends. The various ratios of MF to PPF used were 100:0, 75:25, 65:35, and 50:50. The biscuits were analyzed for their nutritional composition. They all contained high proportions of protein (7.5-15.2%), fat (17.1-18.1%) and digestible carbohydrate (60.2-66.5%). The moisture content was in the range 5.0 to 6.6%, ash 1.5-2.3% and crude fiber 0-0.1%. Sensory evaluation results indicated that all the biscuits had high sensory ratings for all the selected attributes evaluated. The recipe with the 65% MF/35% PPF blend resulted in the highest scores for flavor, texture and general acceptability. There was no significant difference (p > 0.05) between all the biscuits and the familiar Nasco short cake biscuit (reference) in flavor, color, texture and general acceptability.
LaGrone, Lacey N; Trehan, Indi; Meuli, Gus J; Wang, Richard J; Thakwalakwa, Chrissie; Maleta, Kenneth; Manary, Mark J
Background: Children with moderate acute malnutrition (MAM) are often treated with fortified blended flours, most commonly a corn-soy blend (CSB). However, recovery rates remain <75%, lower than the rate achieved with peanut paste–based ready-to-use supplementary foods (RUSFs). To bridge this gap, a novel CSB recipe fortified with oil and dry skim milk, “CSB++,” has been developed. Objective: In this trial we compared CSB++ with 2 RUSF products for the treatment of MAM to test the hypothesis that the recovery rate achieved with CSB++ will not be >5% worse than that achieved with either RUSF. Design: We conducted a prospective, randomized, investigator-blinded, controlled noninferiority trial involving rural Malawian children aged 6–59 mo with MAM. Children received 75 kcal CSB++ · kg−1 · d−1, locally produced soy RUSF, or an imported soy/whey RUSF for ≤12 wk. Results: The recovery rate for CSB++ (n = 763 of 888; 85.9%) was similar to that for soy RUSF (795 of 806, 87.7%; risk difference: −1.82%; 95% CI: −4.95%, 1.30%) and soy/whey RUSF (807 of 918, 87.9%; risk difference: −1.99%; 95% CI: −5.10%, 1.13%). On average, children who received CSB++ required 2 d longer to recover, and the rate of weight gain was less than that with either RUSF, although height gain was the same among all 3 foods studied. Conclusions: A novel, locally produced, fortified blended flour (CSB++) was not inferior to a locally produced soy RUSF and an imported soy/whey RUSF in facilitating recovery from MAM. The recovery rate observed for CSB++ was higher than that for any other fortified blended flour tested previously. This trial is registered at clinicaltrials.gov as NCT00998517. PMID:22170366
Mang, Dimitry Y; Abdou, Armand B; Njintang, Nicolas Y; Djiogue, Edith J M; Panyo, Emmanuel A; Bernard, Clemence; Ndjouenkeu, Robert; Loura, Benoît B; Mbofung, Carl M F
Extraction conditions for maximum values of protein yield, protein content, sugar content and dry matter of vegetable milk extracts from dehulled Mucuna cochinchinensis bean flour and whole Mucuna cochinchinensis bean flour were investigated using response surface methodology. A Central Composite Design (CCFD) with three factors: temperature (25 to 95 °C); extraction time (6 to 74 min.) and water to flour ratio (6 to 24 mL/g) were used. Data analysis showed that all the factors significantly (p < 0.05) affected the responses variables. The optimal conditions determined for extraction were temperature 63-66 °C, water to flour ratio 12-13 mL/g and extraction time of 57-67 min. At these optimum points the protein and sugar contents, extraction yield of protein and dry matter were respectively 14.0 g/100 mL, 4.8 g/100 mL, 53.8 g/100 g, 12.1 g/100 g for vegetable milk produced from dehulled M. cochinchinensis bean flour and 6.4 g/100 mL, 3.5 g/100 mL, 50.0 g/100 g and 8.0 g/100 g for vegetable milk extracted from whole M. cochinchinensis bean flour milk. The optimal condition was verified at the optimum points for model validation and the response values were not significantly different from the predicted values.
Solvent retention capacity (SRC) and Bostwick flow were used to explore the effects of milling yield, extent of chlorination, and flour particle size on cake flour functionality and batter viscosity. The effects of the extent of chlorination were dramatic, but milling yield and additional milling t...
Markiewicz-Keszycka, Maria; Casado-Gavalda, Maria P; Cama-Moncunill, Xavier; Cama-Moncunill, Raquel; Dixit, Yash; Cullen, Patrick J; Sullivan, Carl
Gluten free (GF) diets are prone to mineral deficiency, thus effective monitoring of the elemental composition of GF products is important to ensure a balanced micronutrient diet. The objective of this study was to test the potential of laser-induced breakdown spectroscopy (LIBS) analysis combined with chemometrics for at-line monitoring of ash, potassium and magnesium content of GF flours: tapioca, potato, maize, buckwheat, brown rice and a GF flour mixture. Concentrations of ash, potassium and magnesium were determined with reference methods and LIBS. PCA analysis was performed and presented the potential for discrimination of the six GF flours. For the quantification analysis PLSR models were developed; R 2 cal were 0.99 for magnesium and potassium and 0.97 for ash. The study revealed that LIBS combined with chemometrics is a convenient method to quantify concentrations of ash, potassium and magnesium and present the potential to classify different types of flours. Copyright © 2017 Elsevier Ltd. All rights reserved.
Eleazu, Chinedum; Eleazu, Kate; Aniedu, Chinyere; Amajor, John; Ikpeama, Ahamefula; Ebenzer, Ike
In the current study, wheat flour was mixed with high quality cassava flour (HQCF) in several ratios: 90:10, 80:20, 70:30, and 60:40, and used to prepare 10%, 20%, 30%, and 40% National Root Crops Research Institute (NRCRI) cassava bread, respectively. 100% wheat bread was prepared as a control (100% wheat bread). Five bread samples were prepared per group. Antioxidant assays [i.e., 2,2-diphenyl- 1-picrylhydrazyl radical (DPPH) scavenging assay, reducing power assay] revealed that the bread samples had considerable antioxidant capacities. Substitution of wheat flour with HQCF at various concentrations resulted in dose dependent decreases in the mineral and protein contents of the resulting bread samples. The crude fiber content of the bread samples was minimal, while the carbohydrate content of the bread samples ranged from 43.86% to 48.64%. A 20% substitution of wheat flour with HQCF yielded bread samples with a general acceptability that was comparable to that of 100% wheat bread. The mean bacteria counts of the bread samples ranged from 2.0×103 CFU/mL to 1.4×104 CFU/mL, while the fungal counts ranged from 0 CFU/mL to 3×103 CFU/mL. There was a positive correlation between the DPPH antioxidant activities and the reducing powers of the bread samples (R2=0.871) and a positive correlation between the DPPH antioxidant activities and the flavonoid contents of the bread samples (R2=0.487). The higher microbial load of the NRCRI cassava bread samples indicates that these bread samples may have a shorter shelf life than the 100% wheat bread. The significant positive correlation between total flavonoid content and reducing power (R2=0.750) suggests that the flavonoids present in the lipophilic fractions of the bread samples could be responsible for the reductive capacities of the bread samples. PMID:25054110
Tinas, Hande; Ozbek, Nil; Akman, Suleyman
In this study, lead concentrations in various flour samples were determined by high-resolution continuum source graphite furnace atomic absorption spectrometry with solid sampling. Since samples were analyzed directly, the risks and disadvantages of sample digestion were eliminated. Solid flour samples were dried, weighed on the platforms, Pd was added as a modifier and introduced directly into a graphite tube using a manual solid sampler. Platforms and tubes were coated with Zr. The optimized pyrolysis and atomization temperatures were 800 °C and 2200 °C, respectively. The sensitivities of lead in various flour certified reference materials (CRMs) and aqueous standards were not significantly different. Therefore, aqueous standards were safely used for calibration. The absolute limit of detection and characteristic mass were 7.2 pg and 9.0 pg of lead, respectively. The lead concentrations in different types of flour samples were found in the range of 25-52 μg kg- 1. Finally, homogeneity factors representing the heterogeneity of analyte distribution for lead in flour samples were determined.
Schaffarczyk, Monika; Østdal, Henrik; Matheis, Olivia; Jekle, Mario; Koehler, Peter
A microscale reconstitution baking test, using wheat flour defatted with 2-propanol at 20 °C, was established to determine the functional effects of lipids isolated from lipase-treated wheat dough. Proper selection of solvent and extraction temperature was of major importance to maintain the functionality of defatted flour. Dough and gluten from flour defatted with water-saturated 1-butanol (WSB; extracted at 20 °C) and 2-propanol (extracted at 75 °C) had inferior extensibility and loaf volume compared to control flour extracted with 2-propanol at 20 °C. Quantitation of gluten proteins showed that defatting with WSB (20 °C) or 2-propanol (75 °C) decreased the gliadin and increased the glutenin content. Possible reasons were thiol-disulfide interchange reactions, caused either by heat (2-propanol, 75 °C) or by the solvent WSB, which affected gluten proteins. Confocal laser scanning microscopy showed that regular, interconnected gluten structures were only present in dough from flour defatted with 2-propanol at 20 °C. Copyright © 2016 Elsevier Ltd. All rights reserved.
The impact of heat-moisture treatment processing conditions (15%, 25%, and 35% moisture content; 1, 3, and 5 h heating time at 120 ℃) on the viscosity pasting and gelling profiles of different grain flours matrices (barley, buckwheat, sorghum, high β-glucan barley, and wheat) was investigated by applying successive cooking and cooling cycles to rapid visco analyser canisters with highly hydrated samples (3.5:25, w:w). At a milder heat-moisture treatment conditions (15% moisture content, 1 h heating time), except for sorghum, heat-moisture treatment flours reached much higher viscosity values during earlier pasting and subsequent gelling than the corresponding native counterparts. Besides heat-moisture treatment wheat flour, the described behaviour found also for non-wheat-treated flours has not been previously reported in the literature. An increased hydrophobicity of prolamins and glutelins in low moisture-short heating time heat-moisture treatment of non-wheat flours with high protein content (12.92%-19.95%) could explain the enhanced viscosity profile observed.
Background Inflammatory bowel disease (IBD) is a chronic inflammation of the intestinal epithelium that is driven by the intestinal immune system, oxidative stress and the loss of tolerance to the luminal microbiota. The use of dietary products containing ingredients such as fibres and carbohydrates and/or antioxidant compounds have been used as a therapeutic strategy for intestinal diseases because these products are considered effective in the modulation of the immune system and colonic microbiota. We investigated the beneficial effects of cattail rhizome flour (Typha angustifolia L.) in the trinitrobenzenesulphonic acid (TNBS) model of rat colitis. In addition, we investigated the effects of cattail rhizome flour on the intestinal anti-inflammatory activity of prednisolone, which is a reference drug that is used for treatment of human IBD. Methods The present study included the preparation of flour from rhizomes of cattail (Typha angustifolia L.); an evaluation of the qualitative phytochemical profile of cattail rhizomes; an evaluation of the efficacy of cattail rhizome flour in TNBS-induced rat colitis; an evaluation of the synergistic effects of cattail rhizome flour on the intestinal anti-inflammatory activity of prednisolone; and macroscopic, clinical, biochemical, histopathological and microbiological studies to assess the healing effects of cattail rhizome flour and its synergistic effects in TNBS-induced rat colitis. The data were analysed by ANOVA, Kruskal-Wallis and χ2 tests. Results We tested several concentrations of cattail rhizome flour and found that dietary supplementation with 10% cattail rhizome flour showed the best effects at reducing the extension of the lesion, the colon weight ratio, adherences to adjacent organs and diarrhoea. These effects were related to inhibition of myeloperoxidase (MPO) and alkaline phosphatase (AP) activities and an attenuation of glutathione (GSH) depletion. The 10% cattail rhizome flour was as effective as
Fruet, Andréa Costa; Seito, Leonardo Noboru; Rall, Vera Lúcia Mores; Di Stasi, Luiz Claudio
Inflammatory bowel disease (IBD) is a chronic inflammation of the intestinal epithelium that is driven by the intestinal immune system, oxidative stress and the loss of tolerance to the luminal microbiota. The use of dietary products containing ingredients such as fibres and carbohydrates and/or antioxidant compounds have been used as a therapeutic strategy for intestinal diseases because these products are considered effective in the modulation of the immune system and colonic microbiota. We investigated the beneficial effects of cattail rhizome flour (Typha angustifolia L.) in the trinitrobenzenesulphonic acid (TNBS) model of rat colitis. In addition, we investigated the effects of cattail rhizome flour on the intestinal anti-inflammatory activity of prednisolone, which is a reference drug that is used for treatment of human IBD. The present study included the preparation of flour from rhizomes of cattail (Typha angustifolia L.); an evaluation of the qualitative phytochemical profile of cattail rhizomes; an evaluation of the efficacy of cattail rhizome flour in TNBS-induced rat colitis; an evaluation of the synergistic effects of cattail rhizome flour on the intestinal anti-inflammatory activity of prednisolone; and macroscopic, clinical, biochemical, histopathological and microbiological studies to assess the healing effects of cattail rhizome flour and its synergistic effects in TNBS-induced rat colitis. The data were analysed by ANOVA, Kruskal-Wallis and χ(2) tests. We tested several concentrations of cattail rhizome flour and found that dietary supplementation with 10% cattail rhizome flour showed the best effects at reducing the extension of the lesion, the colon weight ratio, adherences to adjacent organs and diarrhoea. These effects were related to inhibition of myeloperoxidase (MPO) and alkaline phosphatase (AP) activities and an attenuation of glutathione (GSH) depletion. The 10% cattail rhizome flour was as effective as prednisolone, and no synergistic
Abdul Aziz, Noor Aziah; Wong, Lee Min; Bhat, Rajeev; Cheng, Lai Hoong
Mango is a highly perishable seasonal fruit and large quantities are wasted during the peak season as a result of poor postharvest handling procedures. Processing surplus mango fruits into flour to be used as a functional ingredient appears to be a good preservation method to ensure its extended consumption. In the present study, the chemical composition, bioactive/antioxidant compounds and functional properties of green and ripe mango (Mangifera indica var. Chokanan) peel and pulp flours were evaluated. Compared to commercial wheat flour, mango flours were significantly low in moisture and protein, but were high in crude fiber, fat and ash content. Mango flour showed a balance between soluble and insoluble dietary fiber proportions, with total dietary fiber content ranging from 3.2 to 5.94 g kg⁻¹. Mango flours exhibited high values for bioactive/antioxidant compounds compared to wheat flour. The water absorption capacity and oil absorption capacity of mango flours ranged from 0.36 to 0.87 g kg⁻¹ and from 0.18 to 0.22 g kg⁻¹, respectively. Results of this study showed mango peel flour to be a rich source of dietary fiber with good antioxidant and functional properties, which could be a useful ingredient for new functional food formulations. Copyright © 2011 Society of Chemical Industry.
Okpala, Laura; Okoli, Eric; Udensi, Emelem
Cookies were produced from germinated pigeon pea, fermented sorghum, and cocoyam flour (CF) blends to determine their potentials in cookie manufacture. Ten flour formulations were produced and they were evaluated for their proximate and functional properties. Protein content ranged from 4.85% to 19.89% with 100% CF (100CF) having the least value, while 100% germinated pigeon pea flour (100GPF) had the highest value. Increase in levels of GPF to the flour blends resulted in increase in protein content of the blends. Cookies made with 100% fermented sorghum flour (100FSF) had the highest ash content of 2.73%, while cookies made with 100GPF had the least ash content. Energy values of the cookies ranged between 369.37 and 376.56 kcal/100 g, with cookie formulation 50%CF:50%FSF having the least value and cookies made with 16.7%CF:16.7%FSF:66.6GPF having the highest value. The control (cookies made with wheat) had the highest spread ratio of 24.13, while cookies made with 100FSF had the least spread ratio of 14.97. Cookies made with 100CF were the least fragile. Sensory ratings revealed that cookies containing up to 50% CF and above, compared favorably with those made with wheat flour. PMID:24804009
Herawati, ERN; Ariani, D.; Miftakhussolikhah; Yosieto, E.; Angwar, M.; Pranoto, Y.
Ganyong (Canna edulis Kerr) is a local tuber which highest amount of starch content, but has not been fully utilized well at present. One way to improve the usefulness of canna is to process it into noodle, but it needs arenga starch which has high amylose content. The aim of this research was to study the sensory and textural properties of noodle made from canna flour and arenga starch. Research methodologies consist of: (i) characterization of canna flour and arenga starch, (ii) noodle production, and (iii) characterization sensory and textural properties of the noodle. Noodle was made with five ratio variations of canna flour and arenga starch, i.e. 100:0; 75:25; 50:50; 25:75; and 0:100. Sensory analysis was done by hedonic scoring method with attributes : color, stickiness, elasticity, firmness, surface smoothness and overall liking. Textural properties analyses consist of tensile strength, elongation, and stickiness measurements. The results showed that canna flour and arenga starch can be used in noodle making process. Noodle with 25% of canna flour was the most favored product and has the best textural properties. Factors which affect textural properties of product are the amylose and amylopectin amount in each starch. Tensile strength, elongation, and stickiness measurements of noodle with 25% of canna flour were 0,13 N; 41,61%; and 0,0115N respectively.
Saad-Hussein, A; Taha, M M; Fadl, N N; Awad, A-H; Mahdy-Abdallah, H; Moubarz, G; Aziz, H; El-Shamy, K A
The present work aimed to investigate the relationship between occupational exposure to airborne molds, serum aflatoxin B1 (AFB1), and liver enzymes of workers handling wheat flour. The study included 90 bakers, 100 flour milling workers, and 100 controls with no exposure to flour dust. Workplace aspects such as temperature and relative humidity were measured. Airborne fungi were collected and identified. In all subjects included, the serum levels of AFB1, serum albumin (Alb), aspartate aminotransferase (AST), alanine aminotransferase (ALT), and alkaline phosphatase (ALP) were measured. Air temperature and relative humidity were found to be higher in bakeries than in flour mill sections. Airborne Aspergillus species were isolated in dust particles <8 µm in size. The concentration of Aspergillus flavus and Aspergillus niger were higher in bakeries than in the flour mill sections. They were higher in the grinding section than in other mill sections. The serum AFB1-Alb adduct and ALP levels were significantly higher in bakers compared to milling workers (p < 0.0001, p = 0.05), respectively. The liver enzymes AST and ALT were significantly higher among milling workers and bakers than controls (p < 0.05, p < 0.0001), respectively. The duration of exposure was significantly correlated with serum AFB1 in bakers. Moreover, there was significant correlation between serum AFB1, each of ALT and AST levels in bakers. chronic occupational exposure to high concentrations of Aspergillus in workplaces may cause elevations in serum levels of AFB1 and liver enzymes in workers exposed to flour dust. Hence, worker protection measures should be consistently adopted and enforced at the workplace. © The Author(s) 2015.
Gunaratne, Anil; Sirisena, Nihal; Ratnayaka, Upul Kumari; Ratnayaka, Jennet; Kong, Xiangli; Vidhana Arachchi, Lal Peruma; Corke, Harold
Fertiliser is an essential agro-chemical input in modern rice farming. Fertiliser affects the grain quality and yield of rice. Although much research has been carried out to investigate the influence of fertiliser (recommended NPK addition) on yield and quality of rice grain, little is known about the effect of fertiliser on thermal, pasting, gelling and retrogradation properties of rice flour. The aim of this study was to investigate the influence of recommended fertilisation on functional properties of rice flour from four popular high yielding rice varieties grown in Sri Lanka. Fertiliser (recommended NPK addition) increased the protein content but reduced the apparent amylose content in rice flour except in BG 357. Swelling power and amylose leaching were decreased by fertilizer. [corrected] Pasting onset temperature, cold paste viscosity and setback were increased but peak viscosity and granular breakdown decreased. In response to the fertiliser application, gelatinisation peak temperature was reduced in all varieties except BG 300. However, compared to pasting properties, gelatinisation parameters were not much affected by fertilisation. The extent of amylopectin retrogradation was decreased by fertiliser in BG 305 and BG 352 but unchanged in the other two varieties. Except in BG 305, fertiliser reduced the gel hardness of rice flour but increased the gel cohesiveness. It is apparent that the increased protein and reduced amylose content caused by fertiliser affect the functional properties of rice flour. Copyright © 2011 Society of Chemical Industry.
Opara, Umezuruike Linus; Caleb, Oluwafemi J; Uchechukwu-Agua, Amarachi D
The influence of packaging materials (plastic bucket, low density polyethylene [LDPE] bags and paper bags) on quality attributes of the flour of 2 cassava cultivars (TME 419 and UMUCASS 36) stored at 23 ± 2 °C and 60% relative humidity (RH) were investigated for 12 wk. Cassava flour from each package type was evaluated for proximate composition, physicochemical properties and microbial growth at 4-wk intervals. Total color difference (∆E) of both cassava flour cultivars increased with storage duration. Flour packed in plastic bucket had the lowest change in color (3.2 ± 0.42) for cv. "TME 419ˮ and (4.1 ± 0.87) for cv. "UMUCASS 36ˮ at the end of week 12. Total carotenoid decreased across all treatment, and after the 12 wk storage, the highest total carotenoid retention (1.7 ± 0.02 and 2.0 ± 0.05 μg/mL) was observed in flour packed in plastic bucket. However, cassava flour in paper bag had the lowest microbial count of 3.4 ± 0.03 and 3.4 ± 0.08 log cfu/g for total aerobic mesophilic bacteria and fungi, respectively. © 2015 Institute of Food Technologists®
Román, Laura; Martínez, Mario M; Gómez, Manuel
Extruded flour represents an economical and environmental friendly alternative as fat replacer. In this research, the potential use of an extruded flour-water paste as fat replacer in an oil-in-water emulsion was studied. The effect of flour-water ratio and level of oil replacement (30, 50 and 70%) on the microstructure, rheological properties and stability of mayonnaise-like emulsion was evaluated. Fat replacement by extruded flour gradually increased the number and reduced the size of oil droplets. All the emulsion samples showed a pseudoplastic behaviour. At low shear rates a Newtonian region characterised by Carreau model appeared (R 2 >0.99). In general, the limiting viscosity of the Newtonian region and the consistency index increased with the decreased water content of the paste and increased the level of oil substitution. A decrease in oil concentration led to a greater thixotropic behaviour. Oscillatory test revealed that predominance of the continuous or dispersed phase influenced viscoelastic behaviour. Reduction in oil content resulted in an increased freeze-thaw stability. Results suggested that if the flour-water ratio of the paste is controlled, extruded flour is appropriate for preparing reduced-fat oil-in-water emulsion with similar rheological properties to the full fat and greater freeze-thaw stability. Copyright © 2015 Elsevier Ltd. All rights reserved.
Jariyah; Susiloningsih, E. K. B.; Nilasari, K.
The glycemic index of food is the level of food according to its effect on blood glucose levels. Foods with low glycemic index have been shown to improve glucose and fat levels in people with diabetes mellitus and improve insulin resistance. Pedada Fruits (Sonneratia caseolaris) is the one of mangrove fruits has a high fiber content, so it can be used as a raw material in biscuits production. The aim of this research to evaluate the glycemic index on the formula biscuit from the pedada flour and starch from white sweet potato, arrowroot, taro, potato and cassava mixed. This research used completely randomized design in factorial patern with one factor and five levels on formulation biscuit of pedada flour with tubers starch (20% : 80%). The biscuits product were measured of the proximate, crude fiber, glycemic index and glycemic load on wistar rats. The best treatment was 20% of pedada flour with 80% of taro starch which produced biscuit with 76.24% of yield, 2.58% of protein, 15.55% of fat, 2.72% of crude fiber, 48.83 of glycemic index and 7.39 of glycemic load.
Flour from the mesocarp of pods of the tree legume known as mesquite (Prosopis spp.) in North America or algarrobo in South America was one of the most important food staples for desert people. Contemporary milling techniques produces a similar flour that is about 40% sucrose, 25% dietary fiber, and...
Nionelli, Luana; Curri, Nertila; Curiel, José Antonio; Di Cagno, Raffaella; Pontonio, Erica; Cavoski, Ivana; Gobbetti, Marco; Rizzello, Carlo Giuseppe
Six Albanian soft and durum wheat cultivars were characterized based on chemical and technological features, showing different attitudes for bread making. Gliadin and glutenin fractions were selectively extracted from flours, and subjected to two-dimensional electrophoresis. Linja 7 and LVS flours showed the best characteristics, and abundance of high molecular weight (HMW)-glutenins. Type I sourdoughs were prepared through back slopping procedure, and the lactic acid bacteria were typed and identified. Lactobacillus plantarum and Leuconostoc mesenteroides were the predominant species. Thirty-eight representative isolates were singly used for sourdough fermentation of soft and durum wheat Albanian flours and their selection was carried out based on growth and acidification, quotient of fermentation, and proteolytic activity. Two different pools of lactic acid bacteria were designed to ferment soft or durum wheat flours. Sourdough fermentation with mixed and selected starters positively affected the quotient of fermentation, concentration of free amino acids, profile of phenolic acids, and antioxidant and phytase activities. This study provided the basis to exploit the potential of wheat Albanian flours based on an integrated approach, which considered the characterization of the flours and the processing conditions. Copyright © 2014 Elsevier Ltd. All rights reserved.
Zaparrart, M I; Salgado, J M
The chemical characteristics nutritive value and technological properties of the whole sorghum flour for consumption were studied. The chemical analyses indicated 11.5% of protein, 2.7% of fat, 1.3% of fiber and 72% of carbohydrate. Major mineral in the flour were sulphur 0.25%, phosphorus 0.21%, potassium 0.15%, magnesium 0.07% and calcium 0.03%. The amino acid analyses showed lysine as the first limiting amino acid (score 31.3%) and as the second treonine (score 61.5%). The essential fatty acid contents in the oil were linolenic acid 36.2%, linolenic acid 1.4% and trace of arachidonic acid. The tanin content was 0.04%. PER and CEA were increased when the whole sorghum flour was supplemented with exception of digestibility. It was concluded that whole sorghum flour is a good source of calories in the diet (359 Cal/100g) and the protein responded positively to complementing with Phaseoulus vulgaris flour, dried milk whey and synthetic lysine. The bread baked with 0, 5, 10 and 15% of composite flour (wheat-sorghum) showed good volume, good external and internal characteristics and a high percentage of acceptability, by a panel of degustation testers.
Ngatchic, Josiane Therese Metsagang; Sokeng, Selestion Dongmo; Njintang, Nicolas Yanou; Maoundombaye, Theophile; Oben, Julius; Mbofung, Carl Moses F
This comparative study reports the nutritional and toxicological characteristics of Mucuna pruriens flour and a protein-rich product developed from it. The protein-rich mucuna product (PRMP) was obtained by the three steps procedure: protein solubilization, heat-coagulation and sieving. Three weeks rats (n=6 per group) were fed for 28 days on standard protein-substituted rat feed with mucuna flour or PRMP. The experimental design was a factorial design with three mucuna accessions (Velvet, Black and White) and two treatments (flour and PRMP). The protein content ranged 27.2-31.5 g/100 g for flour and 58.8-61.1% for PRMP. Processing flour into PRMP led to a significant (p<0.05) reduction of tannins (50%), total polyphenols (50%) and trypsin inhibitors (94%). The rats fed PMRP diets witnessed weight gain similar to casein, while those fed mucuna flour lost weight. The levels of total cholesterol, HDL-cholesterol and LDL-cholesterol observed in animals groups fed mucuna flour and PRMP were significantly lower (p<0.05) than the control group. In addition lymphocytes, granulocytes, red blood cells, hemoglobin and hematocrit of rats fed mucuna flour were significantly (p<0.05) lower than values in other rats groups. Kidneys glomerular sclerosis and high creatinine levels were observed in group fed mucuna flour. PRMP then represents a good alternative of using mucuna proteins for human nutrition. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.
Mukisa, Ivan M.; Muyanja, Charles M. B. K.; Byaruhanga, Yusuf B.; Schüller, Reidar B.; Langsrud, Thor; Narvhus, Judith A.
Malted and un-malted sorghum ( Sorghum bicolor (L.) Moench) flour was gamma irradiated with a dose of 10 kGy and then re-irradiated with 25 kGy. The effects of irradiation on microbial decontamination, amylase activity, fermentability (using an amylolytic L. plantarum MNC 21 strain), starch granule structure and viscosity were determined. Standard methods were used during determinations. The 10 kGy dose had no effect on microbial load of un-malted flour but reduced that of malted flour by 3 log cycles. Re-irradiation resulted in complete decontamination. Irradiation of malt caused a significant ( p<0.05) reduction in alpha and beta amylase activity (22% and 32%, respectively). Irradiation of un-malted flour increased the rates of utilization of glucose and maltose by 53% and 100%, respectively, during fermentation. However, microbial growth, rate of lactic acid production, final lactic acid concentration and pH were not affected. Starch granules appeared normal externally even after re-irradiation, however, granules ruptured and dissolved easily after hydration and gelatinization. Production of high dry matter density porridge (200 g dry matter/L) with a viscosity of 3500 cP was achieved by irradiation of un-malted flout at 10 kGy. Gamma irradiation can be used to decontaminate flours and could be utilized to produce weaning porridge from sorghum.
Subba, Dilip; Katawal, Surendra Bahadur
Sel-roti is a delicious, deep-fat fried, puffed, ring shaped spongy doughnut like Nepalese indigenous food prepared from the batter of rice flour, ghee and sugar. A study was conducted to determine the effect of particle size of rice flour on bulk density, oil uptake and texture of Sel-roti. Rice was soaked in water and ground with the help of iron mortar and pestle and the flour was analyzed for particle size distribution by using standard sieves and separated into three particle size categories as coarse (> 890 u), medium (120-890 u) and fine (< 120 u). The rice flour of different particle sizes were mixed in different proportions and Sel-roti was prepared from these flours. Bulk density and oil uptake were determined and sensory test was carried out. The results showed significant good positive correlation between mean particle size and bulk density (r = 0.97, p ≤ 0.05) and a good negative correlation between mean particle size and oil-uptake (r = 0.90, p ≤ 0.05). Good positive correlation of mean particle size with texture attributes like hardness (r = 0.99, p ≤ 0.05) and fracturability (r = 0.96, p ≤ 0.05) and good negative correlation with smoothness (r = -0.97, p ≤ 0.05), cohesiveness (r = -0.92, p ≤ 0.05), stickiness (r = -0.76, p ≤ 0.05) and oily mouth feel (r = -0.85, p ≤ 0.05) and fair positive correlation with chewiness (r = 0.65, p > 0.05) were found.
This research concentrates on the recyclability of two wood plastic composites (WPCs)--wood flour/HDPE and wood flour/PLA composites. Two different filler loadings (30 and 50 wt%) were considered for each polymer composite. Each composite formulation contained 3 wt% of a coupling agent, and was individually recycled up to six times by extrusion process. Samples for mechanical and thermo-mechanical tests were prepared by injection molding. All test results were statistically analyzed with a confidence level of 95%. Additional tests such as fiber length measurement, GPC, DSC, TGA, FTIR, and SEM were also performed at specific reprocessing cycles. After reprocessing six times, all formulations showed lower relative decrease in most stiffness properties but higher relative increase in most strain properties. In strength properties, both HDPE composites showed lower relative decrease after reprocessed six times; however, higher and lower filler PLA composites showed sharp decrease reprocessed at second and six times respectively.
Sumarto; Aprianty, D.; Bachtiar, R. A.; Kristiana, L.
Manonjaya salacca (snake fruit) is one of the original varieties of Indonesia which is currently declining due to the quality of taste less favoured than the snake fruit on the market. This variety in the future is feared to be lost, so it is necessary to revitalize the utilization of this snake fruit by diversifying processed products, one of them is baked food products from Manonjaya salacca flour. The purpose of this research was to know the acceptance level of baked food products from Manonjaya salacca flour organoleptically and the nutritional value estimation. This research method was observational with a descriptive explanation. Panellists in this study were consumers with a total of 61 people. Organoleptically, respondents tend to value cake, muffin, cookies, and flakes in every color, flavor, taste, and texture parameters. Nutritional value per 100 g of baked food products from Salacca flour (cake, muffin, cookies, flakes) were energy 287.5-479.0 kcal, water 0.8-3.8 g, protein 6.0-6.7 g, fat 0.8-31.0 g, carbohydrates 45.0-98.8 g, and fiber 1.1-4.6 g. Panellists were accepted the organoleptic characteristics and the estimated nutritional values on baked food products from Manonjaya variety salacca flour were varied.
Nakagawa, Hiroyuki; Matsuo, Yosuke; McCormick, Susan; Lim, Chee Wei
A determination method previously validated for trichothecenes and zearalenone by means of liquid chromatography-tandem mass spectrometry (LC-MS/MS) was adapted for the quantification of T-2 toxin (T-2) as well as its glucoside and acetyl derivatives, T-2-3-glucoside (T-2-3G) and 3-acetyl-T-2 (3A-T-2). HT-2 toxin (HT-2) and its acetyl derivative 3-acetyl-HT-2 (3A-HT-2) were also included as the target chemicals. Staple flours (56 samples collected from the Singapore market) were examined for contamination from T-2 and/or HT-2 and their derivatives. Among them, 16 flours were found to be contaminated with T-2 and/or HT-2, whereas none was contaminated with T-2-3G and 3A-HT-2, except for trace 3A-T-2 detected in 2 rye samples. Rye flour samples were frequently contaminated with both T-2 and HT-2. Some of the reference materials (RMs) were further analyzed, and T-2-3G and 3A-T-2 were quantitatively detected in corn and wheat RMs. The ratio of T-2-3G to T-2 in the RMs seemed to be much lower than the ratio of deoxynivalenol-3-glucoside to deoxynivalenol usually reported in former studies. To the best of our knowledge, the natural contamination of 3A-T-2 in staple flour is reported here for the first time.
Pătraşcu, Livia; Banu, Iuliana; Vasilean, Ina; Aprodu, Iuliana
The effect of protein addition on the rheological, thermo-mechanical and baking properties of wholegrain rice flour was investigated. Gluten, powdered eggs and soy protein concentrate were first analyzed in terms of rheological properties, alone and in admixture with rice flour. The temperature ramp tests showed clear differences in the rheological behavior of the batters supplemented with different proteins. The highest thermal stability was observed in case of soy protein samples. Frequency sweep tests indicated significant improvements of the rheological properties of rice flour supplemented with 15% gluten or soy proteins. The thermo-mechanical tests showed that, due to the high fat contents and low level of free water, the dough samples containing powdered eggs exhibited the highest stability. Addition of gluten resulted in a significant decrease of the dough development time, whereas samples with powdered eggs and soy proteins were more difficult to hydrate. The incorporation of proteins into the rice flour-based dough formulations significantly affected starch behavior by decreasing the peak consistency values. Concerning the quality of the rice flour-based breads, soy protein addition resulted in lighter crumb color and increased texture attributes, samples with gluten had better resilience and adhesiveness, whereas breads with egg protein were less brittle.
Świeca, Michał; Dziki, Dariusz; Gawlik-Dziki, Urszula
Wheat flour in the bread formula was replaced with sprouted wheat flour (SF) characterized by enhanced nutraceutical properties, at 5%, 10%, 15% and 20% levels. The addition of SF slightly increased the total protein content; however, it decreased their digestibility. Some qualitative and quantitative changes in the electrophoretic pattern of proteins were also observed; especially, in the bands corresponding with 27kDa and 15-17kDa proteins. These results were also confirmed by SE-HPLC technique, where a significant increase in the content of proteins and peptides (molecular masses <20kDa) was determined for breads with 20% of SF. Bread enriched with sprouted wheat flour had more resistant starch, but less total starch, compared to control bread. The highest in vitro starch digestibility was determined for the control bread. The studied bread with lowered nutritional value but increased nutritional quality can be used for special groups of consumers (obese, diabetic). Copyright © 2017 Elsevier Ltd. All rights reserved.
Akande, Olamide A; Nakimbugwe, Dorothy; Mukisa, Ivan M
Malnutrition is one of the foremost causes of death among children below 5 years in developing countries. Development of nutrient-dense food formulations using locally available crops has been proposed as a means to combat this menace. This study optimized the extrusion process for the production of a nutritious amaranth-based porridge flour. Least cost formulations containing grain amaranth, groundnut, iron-rich beans, pumpkin, orange-fleshed sweet potato, carrot, and maize were developed and evaluated by a sensory panel ( n = 30) for acceptability using the 9-point hedonic scale. Extrusion process of the most acceptable porridge flour was optimized by response surface methodology (RSM). Barrel temperature (130-170°C) and feed moisture content (14%-20%) were the independent variables which significantly ( p < .05) affected in vitro protein digestibility, vitamin A retention, total polyphenol, phytic content, and iron and zinc extractabilities. Optimization of the extrusion process improved the nutritional quality of the instant flour.
Hamed, Abdelmagid; Ragaee, Sanaa; Abdel-Aal, El-Sayed M
Research has shown that prolonged frozen storage of bread dough reduces the quality of the end product. In this study, the effect of air-classified barley flour fraction rich in β-glucan (approximately 25%) on rheology and quality of frozen yeasted bread dough was investigated. Wheat flour (W) was replaced by air-classified barley flour fraction (B) at 10% without or with 1.4% vital gluten to produce β-glucan enriched barley dough (WB) or barley dough plus gluten (WB + G). Dough products were stored at -18 ºC for 8 wk and their rheological properties were investigated weekly. During frozen storage dough extensibility increased, while elastic and viscous moduli decreased. Differential scanning calorimeter and nuclear magnetic resonance data indicated that WB and WB + G dough products contained approximately 10% less freezable water and 9% more bound water compared to the control dough (W). β-Glucan enriched dough also exhibited less changes in gluten network as shown by SEM photographs. The addition of air-classified barley flour fraction at 10% in frozen dough reduced deterioration effects caused by frozen storage via minimizing water redistribution and maintaining rheological properties of frozen dough. © 2014 Institute of Food Technologists®
Marston, Kathryn; Khouryieh, Hanna; Aramouni, Fadi
Commercially milled food-grade sorghum flour was subjected to ozone at the rate of 0.06 L/min for 15, 30, and 45 min. The pH of ozone-treated flour decreased as exposure time increased. The L* (lightness) values of sorghum flour significantly increased (p < 0.05), while the b* (yellowness) values significantly decreased as ozone exposure time increased. Peak viscosity significantly increased as time of ozonation increased from 0 to 45 min. Results showed that gluten-free cake volume significantly increased as ozonation time increased. Additionally, longer ozonation exposure times increased cells per slice area, lightness, and slice brightness values in gluten-free cakes while reducing crumb firmness. Despite improving lightness and slice brightness values, ozonation did not significantly increase the specific volume of gluten-free batter-based bread. While ozonation improved the volume and texture in cakes, it did not have the same positive effects on gluten-free bread. Bread made from ozonated sorghum flour had an open ragged structure with equivalent volume to the control flour. In both applications, the increased brightness and lightness values due to ozone exposure is recommended to increase the acceptability of sorghum products. © The Author(s) 2014.
da Silva, Cristina Lúcia; Saunders, Cláudia; Szarfarc, Sophia Cornbluth; Fujimori, Elizabeth; da Veiga, Glória Valéria
To estimate the frequency of anaemia in pregnant women before and after the fortification of flours with Fe. Retrospective study developed from secondary data obtained from medical records. Two health units in Rio de Janeiro, Brazil. Socio-economic, demographic, obstetric and Hb concentration data were collected of 778 pregnant women attending prenatal care. Two study groups were created: the first referred to the period before fortification (G1, n 391), including women whose parturition happened before June 2004; and the second referred to the period after fortification (G2, n 387), including women whose last menstrual cycle happened after June 2005. The Hb cut-off point adopted for anaemia diagnosis was <11.0 g/dl. In linear regression models, when Hb concentration was expressed as a dependent variable, women in G2 presented Hb concentration 0.26 g/dl and 0.36 g/dl higher during the second and third trimesters of pregnancy, respectively, compared with G1. In logistic regression models where the dependent variable was anaemia during the second and third trimesters, it was verified that being a member of G2 was a protective factor against anaemia in the third trimester. Regarding the presence of anaemia at any gestational moment, it was verified that being a member of G2 represented a protective factor against anaemia during pregnancy. Results indicate the protective effect of the fortification of flours with Fe in the fight against gestational anaemia, contributing to prevention and control of this nutritional disorder among pregnant women.
Cerezal Mezquita, P; Urtuvia Gatica, V; Ramírez Quintanilla, V; Romero Palacios, N; Arcos Zavala, R
The revaluation of the Andean cultivations, quinua (Chenopodium quinua Willd) and lupin (Lupinus albus L.), to be used in nutritional mixtures, with traditional cereals like corn (Zea mays L.) and rice (Oryza sativa L.), originate mixtures without gluten which constitute a good alternative for the nutrition of children under 24 months that suffer from celiac disease, since they improve the quality of the protein, by essential amino acids compensation, and also impacts in the product's diversification strategy. In the present work, the percentage composition of each flour in the mixture was determined by means of Linear Programming by means of the Solver form from the Excel spreadsheet. Prolamines were determined in the quinua and lupin flours by the ELISA test and the HPLC technique was used in both products obtained called "sweet mix" and "dessert mix", to define the quantity of amino acids with the purpose of providing around the 15% of the proteins required in the day. The flour mixtures selected as optimum, sweet mix, suitable for the preparation of sweet pancakes, as well as for the dessert mix, that by addition of water or milk produce a semi solid dessert, were evaluated after three months of storage, being acceptable their microbiological, bromatological and sensorial requirements, corroborating the results with the good acceptance of the products, prepared from the formulated mixtures, by the children of two Day Care centers of the City of Antofagasta-Chile.
The aim of this research was to investigate the effect of variation of flour polymeric proteins on rheological properties of dough under continuous mixing and thermal treatment for hard red spring (HRS) wheat genotypes grown in North Dakota, USA. Flour polymeric proteins were analyzed by size exclus...
Goyal, Preeti; Chugh, L K
Shelf life of pearl millet flour is very short because of rapid development of rancidity. This investigation was carried out in view of generating breeding material for development of low rancid pearl millet hybrids/varieties. Flour of twenty-one genotypes; seven hybrids, seven CMS lines, five inbreds and two composites stored in covered aluminium boxes at 37 °C for 30 days along with respective fresh flour was analysed for shelf life indicators/determinants. Crude fat content and fat acidity (FA) of fresh flour of the genotypes varied from 3.8 to 7.2% and 11 to 75 mg KOH/100 g d.m., respectively. FA in stored flour ranged between 180 and 330 mg KOH/100 g d.m. After storage, magnitude of decrease in pH of water extract of flour of the genotypes varied from 0.15 to 0.44. Activity of peroxidase (POX) varied from 378 to 588 units in control flour and irrespective of the genotypes decreased upon storage. Increase in FA (difference between FA of fresh and stored flour) rather total build up of FA was positively associated with crude fat content (r = 0.440*) indicated comparatively more prominent role of lipolytic enzymes. Chemical changes taking place in water soluble fraction of flour were independent of fat content as no correlation was discerned between fat content and decrease in pH. Among the hybrids, HHB 197 had lowest crude fat content (4.7%), lowest total build up FA (212 mg KOH/100 g d.m.), slowest increase in FA (191 mg KOH/100 g d.m.), least decrease in pH (0.31) of water soluble fraction flour during storage and lowest activity of POX in fresh flour (377 units/g d.m). Among all the tested CMS lines, inbreds and composites, HBL 11 showed pattern of quantitative changes in FA, pH and POX activity similar to the hybrid HHB 197 and was identified a promising inbred for developing low-rancid pearl millet variety or hybrid.
Sankhon, Abdoulaye; Amadou, Issoufou; Yao, Wei-Rong; Wang, Heya; Qian, He; Sangare, Moustapha
African locust bean tree is an important food tree for both human and livestock such as husks and pods. It plays a very vital role in the rural areas. The aim of this study was to evaluate some physicochemical, mineral characteristics and functional properties of flour and starch extract produced from Parkia biglobosa seeds, using different methods. Three different methods were used for starch extraction in other to get the Starch yield (%),composition analysis for; moisture, protein, fat, ash and fiber contents of flour and starch extracts from Parkia biglobosa were determined on dry basis (db), by AACC method, color and PH value measurements was carried out using color flex spectrocolorimeter, and the official method of AOAC respectively. Pasting properties was determined and X-ray powder starch diffraction was used to examine the crystalline property of flour and starch extract. Gelatinization characteristics and in vitro starch digestibility were also determined, test results were processed using one-way analysis of variance (ANOVA). Flour showed higher (P < 0.05), moisture content, fat, carbohydrate, amylopectine, and protein content than starch, while amylose content of this starch was higher (P<0.05). Phosphorus, sodium, magnesium, and potassium minerals content were higher in flour than starch. Pasting properties, gelatinisation, color, pH values, water and oil absorption capacity content of the flour were found to be higher than that of starch. The pasting characteristics showed a decrease of viscosity, final viscosity, set back value, breakdown, and pasting temperature of flour when compared to that of starch. From our results, we speculate that flour from native Parkia biglobosa grown in Guinea under controlled environmental conditions could be considered as an ideal RS material, whereas the extract Parkia starch could be an ideal SDS material. Therefore, these may offer an interesting alternative for food developers, depending on their characteristics
Okpala, Laura C; Okoli, Eric C
Cookies were produced from blends of cocoyam, fermented sorghum and germinated pigeon pea flours. The study was carried out to evaluate the effects of varying the proportions of these components on the sensory and protein quality of the cookies. The sensory attributes studied were colour, taste, texture, crispness and general acceptability while the protein quality indices were biological value (BV) and net protein utilization (NPU). Mixture response surface methodology was used to model the sensory and protein quality with single, binary and ternary combinations of germinated pigeon pea, fermented sorghum and cocoyam flours. Results showed that BV and NPU of most of the cookies were above minimum acceptable levels. With the exception of cookies containing high levels of pigeon pea flour, cookies had acceptable sensory scores. Increase in pigeon pea flour resulted in increase in the BV and NPU. Regression equations suggested that the ternary blends produced the highest increase in all the sensory attributes (with the exception of colour).
Sakhare, Suresh D; Inamdar, Aashitosh A; Soumya, C; Indrani, D; Rao, G Venkateswara
Wheat flour fractioned by sieving into four different particle size fractions namely finer fractions (<75 and 75-118 μm), coarser fractions (118-150 and >150 μm) were analyzed for their chemical, rheological, bread & parotta making characteristics. The finer fractions had lower ash, higher dry gluten, damaged starch and sodium dodecysulphate (SDS)-sedimentation value than the coarser fractions. The flour from finer fractions gave bread with best sensory and textural attributes. The parottas from finer fractions showed significantly higher sensory scores for colour, texture, layers, mouthfeel and overall quality score than the coarser fractions. In the micrograph of finer flour fractions, higher number of loosened single starch granules than the aggregates of starch and protein matrix were seen as compared to coarser fractions. These studies indicate that the flour from the finer fractions produce higher quality bread, parotta owing to the presence of higher damaged starch content, quantity and quality of protein in these fractions than coarser fractions.
Loman, Abdullah Al; Ju, Lu-Kwang
Soy protein is a well-known nutritional supplement in proteinaceous food and animal feed. However, soybeans contain complex carbohydrate. Selective carbohydrate removal by enzymes could increase the protein content and remove the indigestibility of soy products for inclusion in animal feed. Complete hydrolysis of soy flour carbohydrates is challenging due to the presence of proteins and different types of non-structural polysaccharides. This study is designed to guide complex enzyme mixture required for hydrolysis of all types of soy flour carbohydrates. Enzyme broths from Aspergillus niger, Aspergillus aculeatus and Trichoderma reesei fermentations were evaluated in this study for soy carbohydrate hydrolysis. The resultant hydrolysate was measured for solubilized carbohydrate by both total carbohydrate and reducing sugar analyses. Conversion data attained after 48h hydrolysis were first fitted with models to determine the maximum fractions of carbohydrate hydrolyzable by each enzyme group, i.e., cellulase, xylanase, pectinase and α-galactosidase. Kinetic models were then developed to describe the increasing conversions over time under different enzyme activities and process conditions. The models showed high fidelity in predicting soy carbohydrate hydrolysis over broad ranges of soy flour loading (5-25%) and enzyme activities: per g soy flour, cellulase, 0.04-30 FPU; xylanase, 3.5-618U; pectinase, 0.03-120U; and α-galactosidase, 0.01-60U. The models are valuable in guiding the development and production of optimal enzyme mixtures toward hydrolysis of all types of carbohydrates present in soy flour and in optimizing the design and operation of hydrolysis reactor and process. Copyright © 2016 Elsevier Inc. All rights reserved.
Chung, Hyun-Jung; Liu, Qiang
Flours and isolated starches from three different cultivars (1544-8, 1658-11 and 1760-8) of pea grown under identical environmental conditions were evaluated for their physicochemical properties and in vitro digestibility. The protein content, total starch content and apparent amylose content of pea flour ranged from 24.4 to 26.3%, 48.8 to 50.2%, and 13.9 to 16.7%, respectively. In pea starches, the 1760-8 showed higher apparent amylose content and total starch content than the other cultivars. Pea starch granules were irregularly shaped, ranging from oval to round with a smooth surface. All pea starches showed C-type X-ray diffraction pattern with relative crystallinity ranging between 23.7 and 24.7%. Pea starch had only a single endothermic transition (12.1-14.2 J/g) in the DSC thermogram, whereas pea flour showed two separate endothermic transitions corresponding to starch gelatinization (4.54-4.71 J/g) and disruption of the amylose-lipid complex (0.36-0.78 J/g). In pea cultivars, the 1760-8 had significantly higher setback and final viscosity than the other cultivars in both pea flour (672 and 1170cP, respectively) and isolated starch (2901 and 4811cP). The average branch chain length of pea starches ranged from 20.1 to 20.3. The 1760-8 displayed a larger proportion of short branch chains, DP (degree of polymerization) 6-12 (21.1%), and a smaller proportion of long branch chains, DP≥37 (8.4%). The RDS, SDS and RS contents of pea flour ranged from 23.7 to 24.1%, 11.3 to 12.8%, and 13.2 to 14.8%, respectively. In pea starches, the 1760-8 showed a lower RDS content but higher SDS and RS contents. The expected glycemic index (eGI), based on the hydrolysis index, ranged from 36.9 to 37.7 and 69.8 to 70.7 for pea flour and isolated pea starch, respectively. Copyright © 2011 Elsevier B.V. All rights reserved.