Proceedings of the 2004 Workshop on CFD Validation of Synthetic Jets and Turbulent Separation Control

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L. (Compiler)

2007-01-01

The papers presented here are from the Langley Research Center Workshop on Computational Fluid Dynamics (CFD) Validation of Synthetic Jets and Turbulent Separation Control (nicknamed "CFDVAL2004"), held March 2004 in Williamsburg, Virginia. The goal of the workshop was to bring together an international group of CFD practitioners to assess the current capabilities of different classes of turbulent flow solution methodologies to predict flow fields induced by synthetic jets and separation control geometries. The workshop consisted of three flow-control test cases of varying complexity, and participants could contribute to any number of the cases. Along with their workshop submissions, each participant included a short write-up describing their method for computing the particular case(s). These write-ups are presented as received from the authors with no editing. Descriptions of each of the test cases and experiments are also included.

Simulations & Measurements of Airframe Noise: A BANC Workshops Perspective

NASA Technical Reports Server (NTRS)

Choudhari, Meelan; Lockard, David

2016-01-01

Airframe noise corresponds to the acoustic radiation due to turbulent flow in the vicinity of airframe components such as high-lift devices and landing gears. Since 2010, the American Institute of Aeronautics and Astronautics has organized an ongoing series of workshops devoted to Benchmark Problems for Airframe Noise Computations (BANC). The BANC workshops are aimed at enabling a systematic progress in the understanding and high-fidelity predictions of airframe noise via collaborative investigations that integrate computational fluid dynamics, computational aeroacoustics, and in depth measurements targeting a selected set of canonical yet realistic configurations that advance the current state-of-the-art in multiple respects. Unique features of the BANC Workshops include: intrinsically multi-disciplinary focus involving both fluid dynamics and aeroacoustics, holistic rather than predictive emphasis, concurrent, long term evolution of experiments and simulations with a powerful interplay between the two, and strongly integrative nature by virtue of multi-team, multi-facility, multiple-entry measurements. This paper illustrates these features in the context of the BANC problem categories and outlines some of the challenges involved and how they were addressed. A brief summary of the BANC effort, including its technical objectives, strategy, and selective outcomes thus far is also included.

Proceedings: Joint DOE/NSF Workshop on flow of particulates and fluids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-12-31

These proceedings are the result of the Fifth DOR-NSF Workshop on fundamental research in the area of particulate two-phase flow and granular flow. The present collection of twenty contributions from universities and national laboratories is based on research projects sponsored by either the Department of Energy or the National Science Foundation. These papers illustrate some of the latest advances in theory, simulations, and experiments. The papers from the Workshop held September 29--October 1, 1993 have been separated into three basic areas: experiments, theory, and numerical simulations. A list of attendees at the workshop is included at the end of themore » proceedings. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.« less

Wind Tunnel Seeding Systems for Laser Velocimeters

NASA Technical Reports Server (NTRS)

Hunter, W. W., Jr. (Compiler); Nichols, C. E., Jr. (Compiler)

1985-01-01

The principal motivating factor for convening the Workshop on the Development and Application of Wind Tunnel Seeding Systems for Laser Velocimeters is the necessity to achieve efficient operation and, most importantly, to insure accurate measurements with velocimeter techniques. The ultimate accuracy of particle scattering based laser velocimeter measurements of wind tunnel flow fields depends on the ability of the scattering particle to faithfully track the local flow field in which it is embedded. A complex relationship exists between the particle motion and the local flow field. This relationship is dependent on particle size, size distribution, shape, and density. To quantify the accuracy of the velocimeter measurements of the flow field, the researcher has to know the scattering particle characteristics. In order to obtain optimum velocimeter measurements, the researcher is striving to achieve control of the particle characteristics and to verify those characteristics at the measurement point. Additionally, the researcher is attempting to achieve maximum measurement efficiency through control of particle concentration and location in the flow field.

Atmospheric processes over complex terrain

NASA Astrophysics Data System (ADS)

Banta, Robert M.; Berri, G.; Blumen, William; Carruthers, David J.; Dalu, G. A.; Durran, Dale R.; Egger, Joseph; Garratt, J. R.; Hanna, Steven R.; Hunt, J. C. R.

1990-06-01

A workshop on atmospheric processes over complex terrain, sponsored by the American Meteorological Society, was convened in Park City, Utah from 24 vto 28 October 1988. The overall objective of the workshop was one of interaction and synthesis--interaction among atmospheric scientists carrying out research on a variety of orographic flow problems, and a synthesis of their results and points of view into an assessment of the current status of topical research problems. The final day of the workshop was devoted to an open discussion on the research directions that could be anticipated in the next decade because of new and planned instrumentation and observational networks, the recent emphasis on development of mesoscale numerical models, and continual theoretical investigations of thermally forced flows, orographic waves, and stratified turbulence. This monograph represents an outgrowth of the Park City Workshop. The authors have contributed chapters based on their lecture material. Workshop discussions indicated interest in both the remote sensing and predictability of orographic flows. These chapters were solicited following the workshop in order to provide a more balanced view of current progress and future directions in research on atmospheric processes over complex terrain.

Data Comparisons and Summary of the Second Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Wieseman, Carol D.; Chwalowski, Pawel

2016-01-01

This paper presents the computational results generated by participating teams of the second Aeroelastic Prediction Workshop and compare them with experimental data. Aeroelastic and rigid configurations of the Benchmark Supercritical Wing (BSCW) wind tunnel model served as the focus for the workshop. The comparison data sets include unforced ("steady") system responses, forced pitch oscillations and coupled fluid-structure responses. Integrated coefficients, frequency response functions, and flutter onset conditions are compared. The flow conditions studied were in the transonic range, including both attached and separated flow conditions. Some of the technical discussions that took place at the workshop are summarized.

Nutrient and Sediment Reductions from Algal Flow-Way Technologies: Recommendations to the Chesapeake Bay Program's Water Quality Goal Implementation Team from the Algal Flow-Way Technologies BMP Expert Panel

USDA-ARS?s Scientific Manuscript database

The Chesapeake Stormwater Network hosted a workshop on July, 2012 to discuss the potential nutrient reductions from emerging stormwater technologies including algal flow-way technologies (AFTs). Workshop participants recommended the Chesapeake Bay Program’s Water Quality Goal Implementation Team(WQ...

School Improvement Processes in Career Education.

ERIC Educational Resources Information Center

Smey, Barbara A.

This manual is designed to review those topics which should be considered when initiating a school improvement effort in career education. These materials, representing a one-day workshop, consist of seven activities. Topics covered in the activities are an overview of the workshop, work flow and a work-flow diagram, needs assessment, career…

Nearfield Summary and Statistical Analysis of the Second AIAA Sonic Boom Prediction Workshop

NASA Technical Reports Server (NTRS)

Park, Michael A.; Nemec, Marian

2017-01-01

A summary is provided for the Second AIAA Sonic Boom Workshop held 8-9 January 2017 in conjunction with AIAA SciTech 2017. The workshop used three required models of increasing complexity: an axisymmetric body, a wing body, and a complete configuration with flow-through nacelle. An optional complete configuration with propulsion boundary conditions is also provided. These models are designed with similar nearfield signatures to isolate geometry and shock/expansion interaction effects. Eleven international participant groups submitted nearfield signatures with forces, pitching moment, and iterative convergence norms. Statistics and grid convergence of these nearfield signatures are presented. These submissions are propagated to the ground, and noise levels are computed. This allows the grid convergence and the statistical distribution of a noise level to be computed. While progress is documented since the first workshop, improvement to the analysis methods for a possible subsequent workshop are provided. The complete configuration with flow-through nacelle showed the most dramatic improvement between the two workshops. The current workshop cases are more relevant to vehicles with lower loudness and have the potential for lower annoyance than the first workshop cases. The models for this workshop with quieter ground noise levels than the first workshop exposed weaknesses in analysis, particularly in convective discretization.

Workshop on Laser Diagnostics in Fluid Mechanics and Combustion Held in Fishermens Bend, Victoria on 30 September-1 October 1993

DTIC Science & Technology

1993-10-01

S...... ~ t i . .. . . . . . . FOREWORD The development of laser- based methods for observation and measurement of fluid dynamic phenomena has...Hypersonic Flows ......................... 18 P.C. Palma, A.F.P. Houwing and R.J. Sandeman Timing Problems in Laser Based Combustion Diagnostics...A.F.P. Houwing and R.J. Sandeman Laser- Based Methods for Hypervelocity Flow and Combustion Diagnostics ...... 21 H. Rubinsztein-Dunlop, P. Barker, A

Overview of the Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Chwalowski, Pawel; Schuster, David M.; Dalenbring, Mats

2013-01-01

The AIAA Aeroelastic Prediction Workshop (AePW) was held in April, 2012, bringing together communities of aeroelasticians and computational fluid dynamicists. The objective in conducting this workshop on aeroelastic prediction was to assess state-of-the-art computational aeroelasticity methods as practical tools for the prediction of static and dynamic aeroelastic phenomena. No comprehensive aeroelastic benchmarking validation standard currently exists, greatly hindering validation and state-of-the-art assessment objectives. The workshop was a step towards assessing the state of the art in computational aeroelasticity. This was an opportunity to discuss and evaluate the effectiveness of existing computer codes and modeling techniques for unsteady flow, and to identify computational and experimental areas needing additional research and development. Three configurations served as the basis for the workshop, providing different levels of geometric and flow field complexity. All cases considered involved supercritical airfoils at transonic conditions. The flow fields contained oscillating shocks and in some cases, regions of separation. The computational tools principally employed Reynolds-Averaged Navier Stokes solutions. The successes and failures of the computations and the experiments are examined in this paper.

The Isolated Synthetic Jet in Crossflow: A Benchmark for Flow Control Simulation

NASA Technical Reports Server (NTRS)

Schaeffler, Norman W.; Jenkins, Luther N.

2006-01-01

An overview of the data acquisition, reduction, and uncertainty of experimental measurements made of the flowfield created by the interaction of an isolated synthetic jet and a turbulent boundary layer is presented. The experimental measurements were undertaken to serve as the second of three computational fluid dynamics validation databases for Active Flow Control. The validation databases were presented at the NASA Langley Research Center Workshop on CFD Validation of Synthetic Jets and Turbulent Separation Control in March, 2004. Detailed measurements were made to document the boundary conditions for the flow and also for the phase-averaged flowfield itself. Three component Laser-Doppler Velocimetry, 2-D Particle Image Velocimetry, and Stereo Particle Image Velocimetry were utilized to document the phase-averaged velocity field and the turbulent stresses.

The Isolated Synthetic Jet in Crossflow: A Benchmark for Flow Control Simulation

NASA Technical Reports Server (NTRS)

Schaeffler, Norman W.; Jenkins, Luther N.

2004-01-01

An overview of the data acquisition, reduction, and uncertainty of experimental measurements of the flowfield created by the interaction of an isolated synthetic jet and a turbulent boundary layer is presented. The experimental measurements were undertaken to serve as the second of three computational fluid dynamics validation databases for Active Flow Control. The validation databases were presented at the NASA Langley Research Center Workshop on CFD Validation of Synthetic Jets and Turbulent Separation Control in March, 2004. Detailed measurements were made to document the boundary conditions for the flow and also for the phase-averaged flowfield itself. Three component Laser-Doppler Velocimetry, 2-D Particle Image Velocimetry, and Stereo Particle Image Velocimetry were utilized to document the phase averaged velocity field and the turbulent stresses.

Turbine-99 unsteady simulations - Validation

NASA Astrophysics Data System (ADS)

Cervantes, M. J.; Andersson, U.; Lövgren, H. M.

2010-08-01

The Turbine-99 test case, a Kaplan draft tube model, aimed to determine the state of the art within draft tube simulation. Three workshops were organized on the matter in 1999, 2001 and 2005 where the geometry and experimental data were provided as boundary conditions to the participants. Since the last workshop, computational power and flow modelling have been developed and the available data completed with unsteady pressure measurements and phase resolved velocity measurements in the cone. Such new set of data together with the corresponding phase resolved velocity boundary conditions offer new possibilities to validate unsteady numerical simulations in Kaplan draft tube. The present work presents simulation of the Turbine-99 test case with time dependent angular resolved inlet velocity boundary conditions. Different grids and time steps are investigated. The results are compared to experimental time dependent pressure and velocity measurements.

78 FR 5186 - Clinical Flow Cytometry in Hematologic Malignancies; Public Workshop; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-24

... in the diagnosis of leukemia and lymphoma and more recently in the detection of minimal residual... chronic lymphocytic leukemia (CLL); (3) Third-party flow cytometry data analysis software; and (4... held February 27, 2013 (77 FR 76051, December 26, 2012). An FDA workshop for acute lymphocytic leukemia...

76 FR 35215 - Notice of EPA Workshop on Sanitary Sewer Overflows and Peak Wet Weather Discharges

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

... draft Peak Flows Policy. The workshop will include a facilitated discussion with representatives of organizations that represent POTWs, state NPDES permitting authorities, and non-for-profit environmental groups... maintained sanitary sewer systems are meant to collect and transport all of the sewage that flows into them...

Statistical Analysis of CFD Solutions from the Third AIAA Drag Prediction Workshop

NASA Technical Reports Server (NTRS)

Morrison, Joseph H.; Hemsch, Michael J.

2007-01-01

The first AIAA Drag Prediction Workshop, held in June 2001, evaluated the results from an extensive N-version test of a collection of Reynolds-Averaged Navier-Stokes CFD codes. The code-to-code scatter was more than an order of magnitude larger than desired for design and experimental validation of cruise conditions for a subsonic transport configuration. The second AIAA Drag Prediction Workshop, held in June 2003, emphasized the determination of installed pylon-nacelle drag increments and grid refinement studies. The code-to-code scatter was significantly reduced compared to the first DPW, but still larger than desired. However, grid refinement studies showed no significant improvement in code-to-code scatter with increasing grid refinement. The third Drag Prediction Workshop focused on the determination of installed side-of-body fairing drag increments and grid refinement studies for clean attached flow on wing alone configurations and for separated flow on the DLR-F6 subsonic transport model. This work evaluated the effect of grid refinement on the code-to-code scatter for the clean attached flow test cases and the separated flow test cases.

Focused Assessment of State-of-the-Art CFD Capabilities for Prediction of Subsonic Fixed Wing Aircraft Aerodynamics

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.; Wahls, Richard A.

2008-01-01

Several recent workshops and studies are used to make an assessment of the current status of CFD for subsonic fixed wing aerodynamics. Uncertainty quantification plays a significant role in the assessment, so terms associated with verification and validation are given and some methodology and research areas are highlighted. For high-subsonic-speed cruise through buffet onset, the series of drag prediction workshops and NASA/Boeing buffet onset studies are described. For low-speed flow control for high lift, a circulation control workshop and a synthetic jet flow control workshop are described. Along with a few specific recommendations, gaps and needs identified through the workshops and studies are used to develop a list of broad recommendations to improve CFD capabilities and processes for this discipline in the future.

Grid Quality and Resolution Issues from the Drag Prediction Workshop Series

NASA Technical Reports Server (NTRS)

Mavriplis, Dimitri J.; Vassberg, John C.; Tinoco, Edward N.; Mani, Mori; Brodersen, Olaf P.; Eisfeld, Bernhard; Wahls, Richard A.; Morrison, Joseph H.; Zickuhr, Tom; Levy, David;

Pedestrian safety workshop : a focus on older adults, [instructor guide].

DOT National Transportation Integrated Search

2010-02-01

This guides purpose is to aid you in preparing for, and teaching, the workshop. It is divided into four : sections and a set of appendices: : 1. Getting to know the workshop Suggested steps on how to orient yourself to the content, flow, and :...

Assessment of Slat Noise Predictions for 30P30N High-Lift Configuration From BANC-III Workshop

NASA Technical Reports Server (NTRS)

Choudhari, Meelan; Lockard, David P.

2015-01-01

This paper presents a summary of the computational predictions and measurement data contributed to Category 7 of the 3rd AIAA Workshop on Benchmark Problems for Airframe Noise Computations (BANC-III), which was held in Atlanta, GA, on June 14-15, 2014. Category 7 represents the first slat-noise configuration to be investigated under the BANC series of workshops, namely, the 30P30N two-dimensional high-lift model (with a slat contour that was slightly modified to enable unsteady pressure measurements) at an angle of attack that is relevant to approach conditions. Originally developed for a CFD challenge workshop to assess computational fluid dynamics techniques for steady high-lift predictions, the 30P30N configurations has provided a valuable opportunity for the airframe noise community to collectively assess and advance the computational and experimental techniques for slat noise. The contributed solutions are compared with each other as well as with the initial measurements that became available just prior to the BANC-III Workshop. Specific features of a number of computational solutions on the finer grids compare reasonably well with the initial measurements from FSU and JAXA facilities and/or with each other. However, no single solution (or a subset of solutions) could be identified as clearly superior to the remaining solutions. Grid sensitivity studies presented by multiple BANC-III participants demonstrated a relatively consistent trend of reduced surface pressure fluctuations, higher levels of turbulent kinetic energy in the flow, and lower levels of both narrow band peaks and the broadband component of unsteady pressure spectra in the nearfield and farfield. The lessons learned from the BANC-III contributions have been used to identify improvements to the problem statement for future Category-7 investigations.

Results of the Workshop on Two-Phase Flow, Fluid Stability and Dynamics: Issues in Power, Propulsion, and Advanced Life Support Systems

NASA Technical Reports Server (NTRS)

McQuillen, John; Rame, Enrique; Kassemi, Mohammad; Singh, Bhim; Motil, Brian

2003-01-01

The Two-phase Flow, Fluid Stability and Dynamics Workshop was held on May 15, 2003 in Cleveland, Ohio to define a coherent scientific research plan and roadmap that addresses the multiphase fluid problems associated with NASA s technology development program. The workshop participants, from academia, industry and government, prioritized various multiphase issues and generated a research plan and roadmap to resolve them. This report presents a prioritization of the various multiphase flow and fluid stability phenomena related primarily to power, propulsion, fluid and thermal management and advanced life support; and a plan to address these issues in a logical and timely fashion using analysis, ground-based and space-flight experiments.

A Summary of Data and Findings from the First Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Schuster, David M.; Chwalowski, Pawel.; Heeg, Jennifer; Wieseman, Carol D.

2012-01-01

This paper summarizes data and findings from the first Aeroelastic Prediction Workshop (AePW) held in April, 2012. The workshop has been designed as a series of technical interchange meetings to assess the state of the art of computational methods for predicting unsteady flowfields and static and dynamic aeroelastic response. The goals are to provide an impartial forum to evaluate the effectiveness of existing computer codes and modeling techniques to simulate aeroelastic problems, and to identify computational and experimental areas needing additional research and development. For this initial workshop, three subject configurations have been chosen from existing wind tunnel data sets where there is pertinent experimental data available for comparison. Participant researchers analyzed one or more of the subject configurations and results from all of these computations were compared at the workshop. Keywords: Unsteady Aerodynamics, Aeroelasticity, Computational Fluid Dynamics, Transonic Flow, Separated Flow.

Simulation game provides financial management training.

PubMed

Uhles, Neville; Weimer-Elder, Barbette; Lee, James G

2008-01-01

Adventist HealthCare developed a workshop with a reality simulation game as an engaging means to teach nonfinancial managers about the relationships between cash flow, income statements, and balance sheets. Thirty AHC staff, about half financial and half nonfinancial, were trained as workshop facilitators, and all managers with budget oversight were asked to complete the workshop. The workshop was very positively received; participants' average scores on workshop questionnaires increased from 77.4 percent correct on a presession questionnaire to 91.3 percent correct on a postsession questionnaire.

Constitutive Relationships and Models in Continuum Theories of Multiphase Flows. [conferences

NASA Technical Reports Server (NTRS)

Decker, Rand (Editor)

1989-01-01

In April, 1989, a workshop on constitutive relationships and models in continuum theories of multiphase flows was held at NASA's Marshall Space Flight Center. Topics of constitutive relationships for the partial or per phase stresses, including the concept of solid phase pressure are discussed. Models used for the exchange of mass, momentum, and energy between the phases in a multiphase flow are also discussed. The program, abstracts, and texts of the presentations from the workshop are included.

Synchronization of workshops, using facilities planning

NASA Astrophysics Data System (ADS)

Zineb, Britel; Abdelghani, Cherkaoui

2017-08-01

In this paper, we will present a methodology used for the synchronization of two workshops of a sheet metal department. These two workshops have a supplier-customer relationship. The aim of the study is to synchronise the two workshops as a step towards creating a better material flow, reduced inventory and achieving Just in time and lean production. To achieve this, we used a different set of techniques: SMED, Facilities planning…

LAVA Simulations for the 3rd AIAA CFD High Lift Prediction Workshop with Body Fitted Grids

NASA Technical Reports Server (NTRS)

Jensen, James C.; Stich, Gerrit-Daniel; Housman, Jeffrey A.; Denison, Marie; Kiris, Cetin C.

2018-01-01

In response to the 3rd AIAA CFD High Lift Prediction Workshop, the workshop cases were analyzed using Reynolds-averaged Navier-Stokes flow solvers within the Launch Ascent and Vehicle Aerodynamics (LAVA) solver framework. For the workshop cases the advantages and limitations of both overset-structured an unstructured polyhedral meshes were assessed. The workshop included 3 cases: a 2D airfoil validation case, a mesh convergence study using the High Lift Common Research Model, and a nacelle/pylon integration study using the JAXA (Japan Aerospace Exploration Agency) Standard Model. The 2D airfoil case from the workshop is used to verify the implementation of the Spalart-Allmaras turbulence model along with some of its variants within the solver. The High Lift Common Research Model case is used to assess solver performance and accuracy at varying mesh resolutions, as well as identify the minimum mesh fidelity required for LAVA on this class of problem. The JAXA Standard Model case is used to assess the solver's sensitivity to the turbulence model and to compare the structured and unstructured mesh paradigms. These workshop cases have helped establish best practices for high lift flow configurations for the LAVA solver.

Safe Surgery Trainer

DTIC Science & Technology

2014-11-15

design, testing, and development. b) Prototype Development – Continue developing SST software, game -flow, and mechanics. Continue developing art...refined learning objectives into measurement outlines. Update IRB submissions, edit usability game play study, and update I/ITSEC IRB. Provide case...minimal or near zero. 9) Related Activities a) Presenting at the Design of Learning Games Community Workshop, at I/ITSEC, Wednesday, Dec 3 rd

Proceedings of the wellbore sampling workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Traeger, R.K.; Harding, B.W.

Representatives from academia, industry and research laboratories participated in an intensive two-day review to identify major technological limitations in obtaining solid and fluid samples from wellbores. Top priorities identified for further development include: coring of hard and unconsolidated materials; flow through fluid samplers with borehole measurements T, P and pH; and nonintrusive interrogation of pressure cores.

Multiphase Flow in Power and Propulsion Workshop Fluid Stability and Dynamics Workshop: Overview

NASA Technical Reports Server (NTRS)

McQuillen, John

2003-01-01

The short term purpose of the workshop described by this viewgraph presentation is to present a research plan and a 'roadmap' developed for strategic research for the Office of Biological and Physical Research. The long term purpose of the workshop is to conduct necessary ground-based and space-flight low gravity experiments, complemented by analyses, resulting in a documented framework for parameter prediction of needed by designers. The presentation reviews several previous workshops which were similar, and describes the differences in this workshop. The presentation also includes a prioritizing scheme for microgravity issues, which includes four priority ratings.

Concentration-Discharge Relations in the Critical Zone: Implications for Resolving Critical Zone Structure, Function, and Evolution

NASA Astrophysics Data System (ADS)

Chorover, Jon; Derry, Louis A.; McDowell, William H.

2017-11-01

Critical zone science seeks to develop mechanistic theories that describe critical zone structure, function, and long-term evolution. One postulate is that hydrogeochemical controls on critical zone evolution can be inferred from solute discharges measured down-gradient of reactive flow paths. These flow paths have variable lengths, interfacial compositions, and residence times, and their mixing is reflected in concentration-discharge (C-Q) relations. Motivation for this special section originates from a U.S. Critical Zone Observatories workshop that was held at the University of New Hampshire, 20-22 July 2015. The workshop focused on resolving mechanistic CZ controls over surface water chemical dynamics across the full range of lithogenic (e.g., nonhydrolyzing and hydrolyzing cations and oxyanions) and bioactive solutes (e.g., organic and inorganic forms of C, N, P, and S), including dissolved and colloidal species that may cooccur for a given element. Papers submitted to this special section on "concentration-discharge relations in the critical zone" include those from authors who attended the workshop, as well as others who responded to the open solicitation. Submissions were invited that utilized information pertaining to internal, integrated catchment function (relations between hydrology, biogeochemistry, and landscape structure) to help illuminate controls on observed C-Q relations.

Cavitating Propeller Performance in Inclined Shaft Conditions with OpenFOAM: PPTC 2015 Test Case

NASA Astrophysics Data System (ADS)

Gaggero, Stefano; Villa, Diego

2018-05-01

In this paper, we present our analysis of the non-cavitating and cavitating unsteady performances of the Potsdam Propeller Test Case (PPTC) in oblique flow. For our calculations, we used the Reynolds-averaged Navier-Stokes equation (RANSE) solver from the open-source OpenFOAM libraries. We selected the homogeneous mixture approach to solve for multiphase flow with phase change, using the volume of fluid (VoF) approach to solve the multiphase flow and modeling the mass transfer between vapor and water with the Schnerr-Sauer model. Comparing the model results with the experimental measurements collected during the Second Workshop on Cavitation and Propeller Performance - SMP'15 enabled our assessment of the reliability of the open-source calculations. Comparisons with the numerical data collected during the workshop enabled further analysis of the reliability of different flow solvers from which we produced an overview of recommended guidelines (mesh arrangements and solver setups) for accurate numerical prediction even in off-design conditions. Lastly, we propose a number of calculations using the boundary element method developed at the University of Genoa for assessing the reliability of this dated but still widely adopted approach for design and optimization in the preliminary stages of very demanding test cases.

Complex Flow: Workshop Report; January 17-18, 2012, University of Colorado, Boulder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-06-01

The Department of Energy's Wind Program organized a two-day workshop designed to examine complex wind flow into and out of the wind farm environment and the resulting impacts on the mechanical workings of individual wind turbines. An improved understanding of these processes will subsequently drive down the risk involved for wind energy developers, financiers, and owner/operators, thus driving down the cost of energy.

AST Combustion Workshop: Diagnostics Working Group Report

NASA Technical Reports Server (NTRS)

Locke, Randy J.; Hicks, Yolanda R.; Hanson, Ronald K.

1996-01-01

A workshop was convened under NASA's Advanced Subsonics Technologies (AST) Program. Many of the principal combustion diagnosticians from industry, academia, and government laboratories were assembled in the Diagnostics/Testing Subsection of this workshop to discuss the requirements and obstacles to the successful implementation of advanced diagnostic techniques to the test environment of the proposed AST combustor. The participants, who represented the major relevant areas of advanced diagnostic methods currently applied to combustion and related fields, first established the anticipated AST combustor flowfield conditions. Critical flow parameters were then examined and prioritized as to their importance to combustor/fuel injector design and manufacture, environmental concerns, and computational interests. Diagnostic techniques were then evaluated in terms of current status, merits and obstacles for each flow parameter. All evaluations are presented in tabular form and recommendations are made on the best-suited diagnostic method to implement for each flow parameter in order of applicability and intrinsic value.

Report on the ESO and Excellence Cluster Universe Workshop "Galaxy Ecosystem: Flow of Baryons through Galaxies"

NASA Astrophysics Data System (ADS)

Mainieri, V.; Popesso, P.

2017-12-01

This conference focussed on the "baryon cycle", namely the flow of baryons through galaxies. The following aspects were discussed: a) the gas inflow into systems through streams of pristine gas or as drizzles of recycled material; b) the conversion of this gas into stars; and c) the ejection of gas enriched with heavy elements through powerful outflows. Understanding these different but mutually connected phases is of fundamental importance when studying the details of galaxy formation and evolution through cosmic time. This conference was held following the month-long workshop of the Munich Institute for Astro- and Particle Physics (MIAPP) entitled: "In & out: What rules the galaxy baryon cycle?" It therefore provided an opportunity to share the main outcomes of the MIAPP workshop with a larger audience, including many young outstanding scientists who could not attend the MIAPP workshop.

Measuring bed load discharge in rivers: bedload-surrogate monitoring workshop Minneapolis, Minnesota, 11-14 April 2007

USGS Publications Warehouse

Gray, John R.; Laronne, Jonathan B.; Marr, Jeffrey D.G.

2007-01-01

The International Bedload-Surrogate Monitoring Workshop (http://www.nced.umn.edu/BRIC_2007.html), organized by the Bedload Research International Cooperative (BRIC; www.bedloadresearch.org), was held to assess and abet progress in continuous, semiautomated, or fully automated (surrogate) technologies for monitoring bed load discharge in gravel-, sand-, and mixed gravel-sand-bedded rivers. Direct bed load measurements, particularly at medium and high flows, during which most bed load occurs, tend to be time-consuming, expensive, and potentially hazardous. Surrogate technologies developed largely over the past decade and used at a number of research sites around the world show considerable promise toward providing relatively dense, robust, and quantifiably reliable bed load data sets. However, information on the efficacy of selected technologies for use in monitoring programs is needed, as is identification of the ways and means for bringing the most promising and practical of the technologies to fruition.

Statistical Analysis of the AIAA Drag Prediction Workshop CFD Solutions

NASA Technical Reports Server (NTRS)

Morrison, Joseph H.; Hemsch, Michael J.

2007-01-01

The first AIAA Drag Prediction Workshop (DPW), held in June 2001, evaluated the results from an extensive N-version test of a collection of Reynolds-Averaged Navier-Stokes CFD codes. The code-to-code scatter was more than an order of magnitude larger than desired for design and experimental validation of cruise conditions for a subsonic transport configuration. The second AIAA Drag Prediction Workshop, held in June 2003, emphasized the determination of installed pylon-nacelle drag increments and grid refinement studies. The code-to-code scatter was significantly reduced compared to the first DPW, but still larger than desired. However, grid refinement studies showed no significant improvement in code-to-code scatter with increasing grid refinement. The third AIAA Drag Prediction Workshop, held in June 2006, focused on the determination of installed side-of-body fairing drag increments and grid refinement studies for clean attached flow on wing alone configurations and for separated flow on the DLR-F6 subsonic transport model. This report compares the transonic cruise prediction results of the second and third workshops using statistical analysis.

The Orbital Workshop Waste Management Compartment

NASA Technical Reports Server (NTRS)

1972-01-01

This image is a wide-angle view of the Orbital Workshop waste management compartment. The waste management facilities presented a unique challenge to spacecraft designers. In addition to collection of liquid and solid human wastes, there was a medical requirement to dry all solid human waste products and to return the residue to Earth for examination. Liquid human waste (urine) was frozen for return to Earth. Total quantities of each astronaut's liquid and solid wastes were precisely measured. Cabin air was drawn into the toilet, shown on the wall at right in this photograph, and over the waste products to generate a flow of the waste in the desired direction. The air was then filtered for odor control and antiseptic purposes prior to being discharged back into the cabin.

Workshops on Volcanoes at Santiaguito (Guatemala): A community effort to inform and highlight the outstanding science opportunities at an exceptional laboratory volcano

NASA Astrophysics Data System (ADS)

Johnson, J. B.; Escobar-Wolf, R. P.; Pineda, A.

2016-12-01

Santiaguito is one of Earth's most reliable volcanic spectacles and affords opportunity to investigate dome volcanism, including hourly explosions, pyroclastic flows, block lava flows, and sporadic paroxysmal eruptions. The cubic km dome, active since 1922, comprises four coalescing structures. Lava effusion and explosions are ideally observed from a birds-eye perspective at the summit of Santa Maria volcano (1200 m above and 2700 km from the active Caliente vent). Santiaguito is also unstable and dangerous. Thousands of people in farms and local communities are exposed to hazards from frequent lahars, pyroclastic flows, and potentially large sector-style dome collapses. In January 2016 more than 60 volcano scientists, students, postdocs, and observatory professionals traveled to Santiaguito to participate in field study and discussion about the science and hazards of Santiaguito. The event facilitated pre- and syn-workshop field experiments, including deployment of seismic, deformation, infrasound, multi-spectral gas and thermal sensing, UAV reconnaissance, photogrammetry, and petrologic and rheologic sampling. More than 55 participants spent the night on the 3770-m summit of Santa Maria to partake in field observations. The majority of participants also visited lahar and pyroclastic flow-impacted regions south of the volcano. A goal of the workshop was to demonstrate how multi-disciplinary observations are critical to elucidate volcano eruption dynamics. Integration of geophysical and geochemical observation, and open exchange of technological advances, is vital to achieve the next generation of volcano discovery. Toward this end data collected during the workshop are openly shared within the broader volcanological community. Another objective of the workshop was to bring attention to an especially hazardous and little-studied volcanic system. The majority of workshop attendees had not visited the region and their participation was hoped to seed future collaboration and study in Guatemala. This presentation highlights both the multi-disciplinary science and scientists' experiences at Santiaguito and argues for future similar meetings at other open-vent volcanoes.

Experimental investigation on a high head model Francis turbine during load rejection

NASA Astrophysics Data System (ADS)

Goyal, R.; Bergan, C.; Cervantes, M. J.; Gandhi, B. K.; Dahlhaug, O. G.

2016-11-01

Francis-99 is a set of workshop aiming to determine the state of the art of high head model Francis turbine simulations (flow and structure) under steady and transient operating conditions as well as to promote their development and knowledge dissemination openly. The first workshop (Trondheim, 2014) was concerned with steady state operation. The second workshop will focus on transient operations such as load variation and start-stop. In the present work, 2-D particle image velocimetry (PIV) with synchronized pressure measurements performed in the draft tube cone of the Francis-99 test case during load rejection is presented. Pressure sensors were mounted in the vaneless space and draft tube cone to estimate the instantaneous pressure fluctuations while operating the turbine from the best efficiency point (9.8°) to part load (6.7°) with the presence of a rotating vortex rope (RVR). The time-resolved velocity and pressure data are presented in this paper showing the transition in the turbine from one state to another.

Minnowbrook I: 1993 Workshop on End-Stage Boundary Layer Transition

NASA Technical Reports Server (NTRS)

LaGraff, John E. (Editor)

2007-01-01

This volume contains materials presented at the Minnowbrook I-1993 Workshop on End-Stage Boundary Layer Transition, held at the Syracuse University Minnowbrook Conference Center, New York, from August 15 to 18, 1993. This volume was previously published as a Syracuse University report edited by John E. LaGraff. The workshop organizers were John E. LaGraff (Syracuse University), Terry V. Jones (Oxford University), and J. Paul Gostelow (University of Technology, Sydney). The workshop focused on physical understanding of the late stages of transition from laminar to turbulent flows, with the specific goal of contributing to improving engineering design of turbomachinery and wing airfoils. The workshop participants included academic researchers from the United States and abroad, and representatives from the gas-turbine industry and U.S. government laboratories. To improve interaction and discussions among the participants, no formal papers were required. The physical mechanisms discussed were related to natural and bypass transition, wake-induced transition, effects of freestream turbulence, turbulent spots, hairpin vortices, nonlinear instabilities and breakdown, instability wave interactions, intermittency, turbulence, numerical simulation and modeling of transition, heat transfer in boundary-layer transition, transition in separated flows, laminarization, transition in turbomachinery compressors and turbines, hypersonic boundary-layer transition, and other related topics. This volume contains abstracts and copies of the viewgraphs presented, organized according to the workshop sessions. The workshop summary and the plenary discussion transcript clearly outline future research needs.

Modelling incompressible flows and fluid-structure interaction problems with smoothed particle hydrodynamics: Briefing on the 2017 SPHERIC Beijing International Workshop

NASA Astrophysics Data System (ADS)

Liu, Mou-bin; Huang, Can; Zhang, A.-man

2018-02-01

The 2017 SPHERIC Beijing International Workshop (or SPHERIC Beijing 2017) was held at Peking University, in China, on October 17-20, 2017. This is the first time that the SPHERIC Workshop was held out of Europe. We are delighted to present nine contributions in this Special Column of the Journal of Hydrodynamics, and take this opportunity to announce that the 13th SPHERIC Workshop (or SPHERIC 2018) will be held in Galway, Ireland in 2018 by the National University of Ireland, and the SPHERIC International Workshop in Harbin, China in 2019 by the Harbin Engineering University.

Workshop on Computational Turbulence Modeling

NASA Technical Reports Server (NTRS)

1993-01-01

This document contains presentations given at Workshop on Computational Turbulence Modeling held 15-16 Sep. 1993. The purpose of the meeting was to discuss the current status and future development of turbulence modeling in computational fluid dynamics for aerospace propulsion systems. Papers cover the following topics: turbulence modeling activities at the Center for Modeling of Turbulence and Transition (CMOTT); heat transfer and turbomachinery flow physics; aerothermochemistry and computational methods for space systems; computational fluid dynamics and the k-epsilon turbulence model; propulsion systems; and inlet, duct, and nozzle flow.

Technical Report on NETL's Non Newtonian Multiphase Slurry Workshop: A path forward to understanding non-Newtonian multiphase slurry flows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guenther, Chris; Garg, Rahul

2013-08-19

The Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) sponsored a workshop on non-Newtonian multiphase slurry at NETL’s Morgantown campus August 19 and 20, 2013. The objective of this special two-day meeting of 20-30 invited experts from industry, National Labs and academia was to identify and address technical issues associated with handling non-Newtonian multiphase slurries across various facilities managed by DOE. Particular emphasis during this workshop was placed on applications managed by the Office of Environmental Management (EM). The workshop was preceded by two webinars wherein personnel from ORP and NETL provided background information on the Hanford WTP projectmore » and discussed the critical design challenges facing this project. In non-Newtonian fluids, viscosity is not constant and exhibits a complex dependence on applied shear stress or deformation. Many applications under EM’s tank farm mission involve non-Newtonian slurries that are multiphase in nature; tank farm storage and handling, slurry transport, and mixing all involve multiphase flow dynamics, which require an improved understanding of the mechanisms responsible for rheological changes in non-Newtonian multiphase slurries (NNMS). To discuss the issues in predicting the behavior of NNMS, the workshop focused on two topic areas: (1) State-of-the-art in non-Newtonian Multiphase Slurry Flow, and (2) Scaling up with Confidence and Ensuring Safe and Reliable Long-Term Operation.« less

Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems

NASA Technical Reports Server (NTRS)

Dahl, Milo D. (Editor)

2004-01-01

This publication contains the proceedings of the Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems. In this workshop, as in previous workshops, the problems were devised to gauge the technological advancement of computational techniques to calculate all aspects of sound generation and propagation in air directly from the fundamental governing equations. A variety of benchmark problems have been previously solved ranging from simple geometries with idealized acoustic conditions to test the accuracy and effectiveness of computational algorithms and numerical boundary conditions; to sound radiation from a duct; to gust interaction with a cascade of airfoils; to the sound generated by a separating, turbulent viscous flow. By solving these and similar problems, workshop participants have shown the technical progress from the basic challenges to accurate CAA calculations to the solution of CAA problems of increasing complexity and difficulty. The fourth CAA workshop emphasized the application of CAA methods to the solution of realistic problems. The workshop was held at the Ohio Aerospace Institute in Cleveland, Ohio, on October 20 to 22, 2003. At that time, workshop participants presented their solutions to problems in one or more of five categories. Their solutions are presented in this proceedings along with the comparisons of their solutions to the benchmark solutions or experimental data. The five categories for the benchmark problems were as follows: Category 1:Basic Methods. The numerical computation of sound is affected by, among other issues, the choice of grid used and by the boundary conditions. Category 2:Complex Geometry. The ability to compute the sound in the presence of complex geometric surfaces is important in practical applications of CAA. Category 3:Sound Generation by Interacting With a Gust. The practical application of CAA for computing noise generated by turbomachinery involves the modeling of the noise source mechanism as a vortical gust interacting with an airfoil. Category 4:Sound Transmission and Radiation. Category 5:Sound Generation in Viscous Problems. Sound is generated under certain conditions by a viscous flow as the flow passes an object or a cavity.

Simulation research on the process of large scale ship plane segmentation intelligent workshop

NASA Astrophysics Data System (ADS)

Xu, Peng; Liao, Liangchuang; Zhou, Chao; Xue, Rui; Fu, Wei

2017-04-01

Large scale ship plane segmentation intelligent workshop is a new thing, and there is no research work in related fields at home and abroad. The mode of production should be transformed by the existing industry 2.0 or part of industry 3.0, also transformed from "human brain analysis and judgment + machine manufacturing" to "machine analysis and judgment + machine manufacturing". In this transforming process, there are a great deal of tasks need to be determined on the aspects of management and technology, such as workshop structure evolution, development of intelligent equipment and changes in business model. Along with them is the reformation of the whole workshop. Process simulation in this project would verify general layout and process flow of large scale ship plane section intelligent workshop, also would analyze intelligent workshop working efficiency, which is significant to the next step of the transformation of plane segmentation intelligent workshop.

Separation of ice crystals from interstitial aerosol particles using virtual impaction at the Fifth International Ice Nucleation Workshop FIN-3

NASA Astrophysics Data System (ADS)

Roesch, M.; Garimella, S.; Roesch, C.; Zawadowicz, M. A.; Katich, J. M.; Froyd, K. D.; Cziczo, D. J.

2016-12-01

In this study, a parallel-plate ice chamber, the SPectrometer for Ice Nuclei (SPIN, DMT Inc.) was combined with a pumped counterflow virtual impactor (PCVI, BMI Inc.) to separate ice crystals from interstitial aerosol particles by their aerodynamic size. These measurements were part of the FIN-3 workshop, which took place in fall 2015 at Storm Peak Laboratory (SPL), a high altitude mountain top facility (3220 m m.s.l.) in the Rocky Mountains. The investigated particles were sampled from ambient air and were exposed to cirrus-like conditions inside SPIN (-40°C, 130% RHice). Previous SPIN experiments under these conditions showed that ice crystals were found to be in the super-micron range. Connected to the outlet of the ice chamber, the PCVI was adjusted to separate all particulates aerodynamically larger than 3.5 micrometer to the sample flow while smaller ones were rejected and removed by a pump flow. Using this technique reduces the number of interstitial aerosol particles, which could bias subsequent ice nucleating particle (INP) analysis. Downstream of the PCVI, the separated ice crystals were evaporated and the flow with the remaining INPs was split up to a particle analysis by laser mass spectrometry (PALMS) instrument a laser aerosol spectrometer (LAS, TSI Inc.) and a single particle soot photometer (SP2, DMT Inc.). Based on the sample flow and the resolution of the measured particle data, the lowest concentration threshold for the SP2 instrument was 294 INP L-1 and for the LAS instrument 60 INP L-1. Applying these thresholds as filters to the measured PALMS time series 944 valid INP spectra using the SP2 threshold and 445 valid INP spectra using the LAS threshold were identified. A sensitivity study determining the number of good INP spectra as a function of the filter threshold concentration showed a two-phase linear growth when increasing the threshold concentration showing a breakpoint around 100 INP L-1.

7TH International Workshop on Laser Physics (LPHYS󈨦) Berlin, Germany July 6-10, 1998 Program and Book of Abstracts: Volume 2.

DTIC Science & Technology

1998-07-01

Russia)"Laser refractometry of biological media" Tuesday, July 7 Chairs: S. Gonchukov (Russia) and D. Sliney (USA) A. Priezzhev (Moscow, Russia) 11.00...application to the evaluation of blood flow. Optics and Laser Technology, Vol.23, No.4, p.205, 1991. LASER REFRACTOMETRY OF BIOLOGICAL MEDIA S.A. Gonchukov...measuring (fast-action). Refractometry is a classical technique. The sensitivity of traditional measuring is usually 10-4-10-7. That’s no bad. But

Proceedings of the ISTVS (International Society for Terrain-Vehicle Systems) Workshop on Measurement and Evaluation of Tire Performance under Winter Conditions, Alta, Utah, 11-14 April 1983.

DTIC Science & Technology

1985-09-01

Transducers capable of measuring electro-hydraulic control system which fore-aft and vertical load on a driven controls the brake system to deactivate tire...power. * axle allows design of all load-carrying - System logic power. ENGINE I EXTERNAL COMPARTMENT COMPONENTS CAB Brake Levelin system I trans... brake con- The TWS DAS was designed to 1) pro- trol system . vide onboard data sampling and filtering, A simplified truck operational flow chart 2) make

Special issue of selected papers from the second UK-Japan bilateral Workshop and First ERCOFTAC Workshop on Turbulent Flows Generated/Designed in Multiscale/Fractal Ways, London, March 2012

NASA Astrophysics Data System (ADS)

Laizet, Sylvain; Sakai, Yasuhiko; Christos Vassilicos, J.

2013-12-01

This special issue of Fluid Dynamics Research includes nine papers which are based on nine of the presentations at the Second UK-Japan bilateral Workshop and First ERCOFTAC Workshop on 'Turbulent flows generated/designed in multiscale/fractal ways: fundamentals and applications' held from 26 to 27 March 2012 at Imperial College London, UK. The research area of fractal-generated turbulent flows started with a chapter published in 2001 in one of the conference proceedings which came out of the 1999 Isaac Newton Institute 6 month Programme on Turbulence in Cambridge (UK). However, the first results which formed the basis of much of the work reported in this special issue started appearing from 2007 onwards and progress since then could perhaps be described as not insignificant. Research in this area has resulted in the following six notable advances: (a) the definition of two new length-scales characterizing grid-generated turbulence; (b) enhanced and energy-efficient stirring and scalar transfer by fractal grid and fractal openings/flanges with applications, in particular, to improved turbulence generation for combustion; (c) the non-equilibrium turbulent dissipation law; (d) non-equilibrium axisymmetric wake laws; (e) insights into the dependence of drag forces and vortex shedding on the fractal geometry of fractal objects and simulation methods for the calculation of drag of fractal trees; and (f) the invention and successful proof of concept of fractal spoilers and fractal fences. The present special issue contains papers directly related to these advances and can be seen as a reflection of the current research in the field of fractal-generated turbulent flows and their differences and commonalities with other turbulent flows. The financial support from the Japan Society for the Promotion of Science has been decisive for the organization and success of this workshop. We are also grateful to ERCOFTAC who put in place the EU-wide Special Interest Group on multiscale-generated turbulence and for supporting the workshop both financially and by way of advertisement. Last but by no means least, we express our deep gratitude to the editors of FDR who handled this issue: M Funakoshi, A D Gilbert, L B Mydlarski and K Suga.

Transducer Workshop (12th) Held at Melbourne, Florida on 7-9 June 1983.

DTIC Science & Technology

1983-06-01

applications since above 200OF (930C) the heat treatment CES among others, history of the Manganin is changes and (*) The Specific products referenced the...linearization scheme is compromised. and manufacturers’ addresses are given Heat treatment history change means ind thebibliographyi add sesparate pa... pulsating (dynamic) flow, even ment with the Unified Approach to the when readings are averaged over a period Engineering of Measuring Systems on of the

Study of basic physical processes in liquid rocket engines

NASA Technical Reports Server (NTRS)

Wu, S. T.; Chen, C. P.

1992-01-01

Inconsistencies between analytical results and measurements for liquid rocket thrust chamber performance, which escape suitable explanations, have motivated the examination of the basic phys ical modeling formulations as to their unlimited application. The publication of Prof. D. Straub's book, 'Thermofluid-dynamics of Optimized Rocket Propulsions,' further stimulated the interest of understanding the gas dynamic relationships in chemically reacting mixtures. A review of other concepts proposed by Falk-Ruppel (Gibbsian Thermodynamics), Straub (Alternative Theory, AT), Prigogine (Non-Equilibrium Thermodynamics), Boltzmann (Kinetic Theory), and Truesdell (Rational Mechanism) has been made to obtain a better understanding of the Navier-Stokes equation, which is now used extensively for chemically reacting flow treatment in combustion chambers. In addition to the study of the different concepts, two workshops were conducted to clarify some of the issues. The first workshop centered on Falk-Ruppel's new 'dynamics' concept, while the second one concentrated on Straub's AT. In this report brief summaries of the reviewed philosophies are presented and compared with the classical Navier-Stokes formulation in a tabular arrangement. Also the highlights of both workshops are addressed.

Experimental evaluation of the Skylab orbital workshop ventilation system concept

NASA Technical Reports Server (NTRS)

Allums, S. L.; Hastings, L. J.; Ralston, J. T.

1972-01-01

Extensive testing was conducted to evaluate the Orbital Workshop ventilation concept. Component tests were utilized to determine the relationship between operating characteristics at 1 and 0.34 atm. System tests were conducted at 1 atm within the Orbital Workshop full-scale mockup to assess delivered volumetric flow rate and compartment air velocities. Component tests with the Anemostat circular diffusers (plenum- and duct-mounted) demonstrated that the diffuser produced essentially equivalent airflow patterns and velocities in 1- and 0.34-atm environments. The tests also showed that the pressure drop across the diffuser could be scaled from 1 to 0.34 atm using the atmosphere pressure ratio. Fan tests indicated that the performance of a multiple, parallel-mounted fan cluster could be predicted by summing the single-fan flow rates at a given delta P.

PREFACE: The 15th International Couette-Taylor Worskhop

NASA Astrophysics Data System (ADS)

Mutabazi, Innocent; Crumeyrolle, Olivier

2008-07-01

The 15th International Couette-Taylor Worskhop (ICTW15) was held in Le Havre, France from 9-12 July 2007. This regular international conference started in 1979 in Leeds, UK when the research interest in simple models of fluid flows was revitalized by systematic investigation of Rayleigh-Bénard convection and the Couette-Taylor flow. These two flow systems are good prototypes for the study of the transition to chaos and turbulence in closed flows. The workshop themes have been expanded from the original Couette-Taylor flow to include other centrifugal instabilities (Dean, Görtler, Taylor-Dean), spherical Couette flows, thermal convection instabilities, MHD, nonlinear dynamics and chaos, transition to turbulence, development of numerical and experimental techniques. The impressive longevity of the ICTW is due to the close interaction and fertile exchanges between international research groups from different disciplines: Physics and Astrophysics, Applied Mathematics, Mechanical Engineering, Chemical Engineering. The present workshop was attended by 100 participants, the program included over 83 contributions with 4 plenary lectures, 68 oral communications and 17 posters. The topics include, besides the classical Couette-Taylor flows, the centrifugal flows with longitudinal vortices, the shear flows, the thermal convection in curved geometries, the spherical Couette-Taylor flow, the geophysical flows, the magneto-hydrodynamic effects including the dynamo effect, the complex flows (viscoelasticity, immiscible fluids, bubbles and migration). Selected papers have been processed through the peer review system and are published in this issue of the Journal of Physics: Conference Series. The Workshop has been sponsored by Le Havre University, the Region Council of Haute-Normandie, Le Havre City Council, CNRS (ST2I, GdR-DYCOEC), and the European Space Agency through GEOFLOW program. The French Ministry of Defense (DGA), the Ministry of Foreign Affairs, the Ministry of Research and the University Association of Mechanics have provided some support. Innocent Mutabazi and Olivier Crumeyrolle Proceedings editors Le Havre, France 15 July 2008

USM3D Simulations for Second Sonic Boom Workshop

NASA Technical Reports Server (NTRS)

Elmiligui, Alaa; Carter, Melissa B.; Nayani, Sudheer N.; Cliff, Susan; Pearl, Jason M.

2017-01-01

The NASA Tetrahedral Unstructured Software System with the USM3D flow solver was used to compute test cases for the Second AIAA Sonic Boom Prediction Workshop. The intent of this report is to document the USM3D results for SBPW2 test cases. The test cases included an axisymmetric equivalent area body, a JAXA wing body, a NASA low boom supersonic configuration modeled with flow through nacelles and engine boundary conditions. All simulations were conducted for a free stream Mach number of 1.6, zero degrees angle of attack, and a Reynolds number of 5.7 million per meter. Simulations were conducted on tetrahedral grids provided by the workshop committee, as well as a family of grids generated by an in-house approach for sonic boom analyses known as BoomGrid using current best practices. The near-field pressure signatures were extracted and propagated to the ground with the atmospheric propagation code, sBOOM. The USM3D near-field pressure signatures, corresponding sBOOM ground signatures, and loudness levels on the ground are compared with mean values from other workshop participants.

Summary report of the workshop on the U.S. use of surface waves for monitoring the CTBT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ritzwoller, M; Walter, W R

1998-09-01

The workshop addressed the following general research goals of relevance to monitoring and verifying the Comprehensive Test Ban Treaty (CTBT): A) To apprise participants of current and planned research in order to facilitate information exchange, collaboration, and peer review. B) To compare and discuss techniques for data selection, measurement, error assessment, modeling methodologies, etc. To compare results in regions where they overlap and understand the causes of obsenied differences. C) To hear about the U.S. research customer's (AFTAC and DOE Knowledge Base) current and anticipated interests in surface wave research. D) To discuss information flow and integration. How can researchmore » results be prepared for efficient use and integration into operational systems E) To identify and discuss fruitful future directions for research.« less

Improving the quality of science reporting: a case study of Metcalf's Annual Science Immersion Workshop for Journalists

NASA Astrophysics Data System (ADS)

Murray, Cara

Environmental journalists and science writers express a strong desire for professional development opportunities. These groups often identify inadequate training in science and science writing as their biggest obstacles to accurate reporting. To fill these training gaps, science immersion workshops for journalists, focused on a particular specialization such as marine reporting, offer both practical and pedagogical advantages. However, few efforts have been made to evaluate the efficacy of these workshops in a quantitative way. This case study of the Annual Science Immersion Workshop for Journalists, offered by the Metcalf Institute for Marine and Environmental Reporting, aimed to determine whether journalists' reporting is more accurate as a result of program participation. Survey data, collected from 11 years of workshop alumni, indicate neutral to positive responses on all measures of change. Using an exploratory approach, this study analyzed survey results by five categories---year of attendance, education level and type, media format, and years of journalism experience---to investigate the role of demographic variables in participants' learning experience. Some results of these comparative analyses correlate with programmatic changes made during the 11 years surveyed. The presence or absence of specific workshop activities coincides with higher and lower levels of reported change for specific learning objectives targeted by those activities. Other results have possible implications for program design or participant eligibility to maximize program impact. Journalists with more formal education report more change on multiple learning objectives, such as data use, understanding of scientific uncertainty, desire to report on environmental topics, and communication with scientists. At the same time, journalists with less formal education and less professional experience are more likely to have recommended the program to others. Some confounding results suggest a need for different group divisions based on media format in future analysis. The data analysis of survey participants disaggregated by media type generated few statistically significant differences of note. This case study relates to larger trends, questions and changes in today's media landscape. Because information flows from the media to the public and into policy, the quality and quantity of marine reporting impacts the quality and quantity of marine policy. In a media environment that has become increasingly interactive, where information flow is less hierarchical, now more than ever environmental journalists must be equipped to filter, interpret and evaluate information in order to communicate effectively.

Overview and Summary of the Second AIAA High Lift Prediction Workshop

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.; Slotnick, Jeffrey P.

2014-01-01

The second AIAA CFD High-Lift Prediction Workshop was held in San Diego, California, in June 2013. The goals of the workshop continued in the tradition of the first high-lift workshop: to assess the numerical prediction capability of current-generation computational fluid dynamics (CFD) technology for swept, medium/high-aspect-ratio wings in landing/takeoff (high-lift) configurations. This workshop analyzed the flow over the DLR-F11 model in landing configuration at two different Reynolds numbers. Twenty-six participants submitted a total of 48 data sets of CFD results. A variety of grid systems (both structured and unstructured) were used. Trends due to grid density and Reynolds number were analyzed, and effects of support brackets were also included. This paper analyzes the combined results from all workshop participants. Comparisons with experimental data are made. A statistical summary of the CFD results is also included.

75 FR 33613 - Notice of Interviews, Teleconferences, Regional Workshops and Multi-Stakeholder Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-14

............ Project No. 2266-096. Sabine River Authority of Texas and Project No. 2305-020. State of Louisiana. Town of Massena Electric Department Project No. 12607-001. Free Flow Power Corporation........ Project No. 12829-001. Free Flow Power Corporation........ Project No. 12861-001. Free Flow Power Corporation...

Structure and Flow: Toward an Organic Approach to Critical Multiliteracies in a Writing Workshop

ERIC Educational Resources Information Center

Schaenen, Inda

2010-01-01

This qualitative case study reports on a three-year writing enrichment program among second, third, and fourth graders at a public urban elementary school in a medium-sized midwestern city. Designed as teacher research, the inquiry is a phenomenological examination of the experience of the workshop for its participants, including more than one…

REPORT OF ON-SITE INSPECTION WORKSHOP-16

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweeney, J J

2009-07-07

The central issue addressed by this workshop was the task of making the on-site inspection (OSI) part of the Comprehensive Nuclear-Test-Ban Treaty verification system operationally ready at entry into force of the Treaty. It is recognized, and this was emphasized by the 2008 OSI Integrated Field Exercise (IFE), that it is not possible to develop every part of the OSI regime simultaneously. Therefore, it is necessary to prioritize the approach to OSI readiness. The reviews of the IFE have pointed to many elements of OSI readiness that still need development. The objective of this workshop was to provide priorities formore » the path forward for Working Group B to consider. Several critical areas have been identified that are related to the development of OSI readiness: (1) Technology development: Priorities are radionuclide and noble gas sampling and analysis, visual observation, multispectral/infrared imaging methods, active seismic methods and the recognition of the importance of signatures. (2) Organizational development: Priorities are health and safety, the Operations Support Centre, the Equipment Storage and Maintenance Facility, information technology data flow and communications. (3) Resources: The expertise to develop key parts of the OSI regime is not available within the current OSI Division staff. To develop these aspects of the regime will require more staff or supplements to the staff with cost-free experts or other means. Aspects of the system that could benefit from more staff include radionuclide and noble gas detection methods, data flow and communications, visual observation, multispectral/infrared methods and health and safety. As the path forward, participants of this workshop recognized a need to optimize the development of OSI priorities. The outcome of this workshop is to suggest for consideration an operational approach to OSI readiness that utilizes results of an evaluation of the relative effectiveness of OSI elements versus their relative maturity. By integrating such an assessment with considerations of integrated operational capabilities and the anticipated level of inspection team self-sufficiency and measurable milestone criteria, a set of priorities for OSI development can be developed. Once these priorities have been established, the Policy Making Organs can decide upon the milestones, strategic plan and action plan to serve as guidance for implementation by the Provisional Technical Secretariat. The suggested operational approach is as follows: (1) Assess the relative effectiveness (importance) of OSI elements versus their relative maturity; (2) Determine the anticipated level of self-sufficiency; (3) Define measurable milestone criteria; and (4) Result: Milestones for OSI readiness.« less

Investigations of Fluid-Structure-Coupling and Turbulence Model Effects on the DLR Results of the Fifth AIAA CFD Drag Prediction Workshop

NASA Technical Reports Server (NTRS)

Keye, Stefan; Togiti, Vamish; Eisfeld, Bernhard; Brodersen, Olaf P.; Rivers, Melissa B.

2013-01-01

The accurate calculation of aerodynamic forces and moments is of significant importance during the design phase of an aircraft. Reynolds-averaged Navier-Stokes (RANS) based Computational Fluid Dynamics (CFD) has been strongly developed over the last two decades regarding robustness, efficiency, and capabilities for aerodynamically complex configurations. Incremental aerodynamic coefficients of different designs can be calculated with an acceptable reliability at the cruise design point of transonic aircraft for non-separated flows. But regarding absolute values as well as increments at off-design significant challenges still exist to compute aerodynamic data and the underlying flow physics with the accuracy required. In addition to drag, pitching moments are difficult to predict because small deviations of the pressure distributions, e.g. due to neglecting wing bending and twisting caused by the aerodynamic loads can result in large discrepancies compared to experimental data. Flow separations that start to develop at off-design conditions, e.g. in corner-flows, at trailing edges, or shock induced, can have a strong impact on the predictions of aerodynamic coefficients too. Based on these challenges faced by the CFD community a working group of the AIAA Applied Aerodynamics Technical Committee initiated in 2001 the CFD Drag Prediction Workshop (DPW) series resulting in five international workshops. The results of the participants and the committee are summarized in more than 120 papers. The latest, fifth workshop took place in June 2012 in conjunction with the 30th AIAA Applied Aerodynamics Conference. The results in this paper will evaluate the influence of static aeroelastic wing deformations onto pressure distributions and overall aerodynamic coefficients based on the NASA finite element structural model and the common grids.

[How to promote the respect of good infusion practices by meeting health care professionals?].

PubMed

Le Reste, C; Fiedler, A; Dubois, S; Dewailly, A; Le Du, I; Cogulet, V

2016-05-01

Health care professionals often forget that there are risks associated with infusion therapy even if it is a common care. In order to assess this practice and to draw potential improvement actions, an audit of local gravity-flow intravenous infusion practices was conducted. The audit, based on a grid including 66 items from the medical prescription to the end of the infusion therapy administration, was conducted in the 6 units which use the most gravity-flow intravenous infusion devices. A multidisciplinary working group was created to decide and organize priority corrective measures in order to improve infusion practices and quality of healthcare. The audit enabled to observe 90hours of nurse's practices (96 infusions) and highlighted heterogeneity in infusion, in some cases inappropriate infusion practices and misuse of infusion devices. We found 4 main issues: labelling infusion therapy, training of health care professionals on good practices, support the purchase of infusion pumps and standardize perfusion line. An interactive educational program for nurses (workshops) was organized to enhance the respect of good practices: infusion identification at any time, respect of hygiene rules, flow rate regulation by counting drops, appropriate use of pumps and flow rate regulators. The audit drew up work priorities. The workshops made easier exchanges between professionals and had a warm welcome that's why it is essential to carry on such training. This collaborative approach between pharmacists, nurses, hygienists and biomedical technicians contribute to drug management improvement and promote optimal patient care. Copyright © 2015 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

Characterization of three new condensation particle counters for sub-3 nm particle detection during the Helsinki CPC workshop: the ADI versatile water CPC, TSI 3777 nano enhancer and boosted TSI 3010

NASA Astrophysics Data System (ADS)

Kangasluoma, Juha; Hering, Susanne; Picard, David; Lewis, Gregory; Enroth, Joonas; Korhonen, Frans; Kulmala, Markku; Sellegri, Karine; Attoui, Michel; Petäjä, Tuukka

2017-06-01

In this study we characterized the performance of three new particle counters able to detect particles smaller than 3 nm during the Helsinki condensation particle counter (CPC) workshop in summer 2016: the Aerosol Dynamics Inc. (ADI; Berkeley, USA) versatile water condensation particle counter (vWCPC), TSI 3777 nano enhancer (TSI Inc., Shoreview, USA) and modified and boosted TSI 3010-type CPC from Université Blaise Pascal called a B3010. The performance of all CPCs was first measured with charged tungsten oxide test particles at temperature settings which resulted in supersaturation low enough to not detect any ions produced by a radioactive source. Due to similar measured detection efficiencies, additional comparison between the 3777 and vWCPC were conducted using electrically neutral tungsten oxide test particles and with positively charged tetradodecylammonium bromide. Furthermore, the detection efficiencies of the 3777 and vWCPC were measured with boosted temperature settings yielding supersaturation which was at the onset of homogeneous nucleation for the 3777 or confined within the range of liquid water for the ADI vWCPC. Finally, CPC-specific tests were conducted to probe the response of the 3777 to various inlet flow relative humidities, of the B3010 to various inlet flow rates and of the vWCPC to various particle concentrations. For the 3777 and vWCPC the measured 50 % detection diameters (d50s) were in the range of 1.3-2.4 nm for the tungsten oxide particles, depending on the particle charging state and CPC temperature settings, between 2.5 and 3.3 nm for the organic test aerosol, and in the range of 3.2-3.4 nm for tungsten oxide for the B3010.

Integrating CFD, CAA, and Experiments Towards Benchmark Datasets for Airframe Noise Problems

NASA Technical Reports Server (NTRS)

Choudhari, Meelan M.; Yamamoto, Kazuomi

2012-01-01

Airframe noise corresponds to the acoustic radiation due to turbulent flow in the vicinity of airframe components such as high-lift devices and landing gears. The combination of geometric complexity, high Reynolds number turbulence, multiple regions of separation, and a strong coupling with adjacent physical components makes the problem of airframe noise highly challenging. Since 2010, the American Institute of Aeronautics and Astronautics has organized an ongoing series of workshops devoted to Benchmark Problems for Airframe Noise Computations (BANC). The BANC workshops are aimed at enabling a systematic progress in the understanding and high-fidelity predictions of airframe noise via collaborative investigations that integrate state of the art computational fluid dynamics, computational aeroacoustics, and in depth, holistic, and multifacility measurements targeting a selected set of canonical yet realistic configurations. This paper provides a brief summary of the BANC effort, including its technical objectives, strategy, and selective outcomes thus far.

IFCPT S-Duct Grid-Adapted FUN3D Computations for the Third Propulsion Aerodynamics Works

NASA Technical Reports Server (NTRS)

Davis, Zach S.; Park, M. A.

2017-01-01

Contributions of the unstructured Reynolds-averaged Navier-Stokes code, FUN3D, to the 3rd AIAA Propulsion Aerodynamics Workshop are described for the diffusing IFCPT S-Duct. Using workshop-supplied grids, results for the baseline S-Duct, baseline S-Duct with Aerodynamic Interface Plane (AIP) rake hardware, and baseline S-Duct with flow control devices are compared with experimental data and results computed with output-based, off-body grid adaptation in FUN3D. Due to the absence of influential geometry components, total pressure recovery is overpredicted on the baseline S-Duct and S-Duct with flow control vanes when compared to experimental values. An estimate for the exact value of total pressure recovery is derived for these cases given an infinitely refined mesh. When results from output-based mesh adaptation are compared with those computed on workshop-supplied grids, a considerable improvement in predicting total pressure recovery is observed. By including more representative geometry, output-based mesh adaptation compares very favorably with experimental data in terms of predicting the total pressure recovery cost-function; whereas, results computed using the workshop-supplied grids are underpredicted.

Plans for Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Ballmann, Josef; Bhatia, Kumar; Blades, Eric; Boucke, Alexander; Chwalowski, Pawel; Dietz, Guido; Dowell, Earl; Florance, Jennifer P.; Hansen, Thorsten;

First Annual High-Speed Research Workshop, part 4

NASA Technical Reports Server (NTRS)

Whitehead, Allen H., Jr. (Compiler)

1992-01-01

Papers presented at the First Annual High Speed Research Workshop held in Williamsburg, Viginia, on May 14-16, 1991 are presented. This NASA-sponsored workshop provided a national forum for presenting and discussing important technology issues related to the definition of an economically viable and environmentally compatible High Speed Civil Transport. The sessions are developed around the technical components of NASA's Phase 1 High Speed Research Program which addresses the environmental issues of atmospheric emissions, community noise, and sonic boom. In particular, this part of the publication, Part 4, addresses high lift research and supersonic laminar flow control.

Lower Stratospheric Measurement Issues Workshop Report

NASA Technical Reports Server (NTRS)

Schmeltekopf, Arthur L.

1992-01-01

The Lower Stratospheric Measurement Issues workshop was held on 17-19 Oct. 1990. The 3-day workshop was sponsored by the Atmospheric Effects of Stratospheric Aircraft (AESA) component of the High Speed Research Program (HSRP). Its purpose was to provide a scientific forum for addressing specific issues regarding chemistry and transport in the lower stratosphere, for which measurements are essential to an assessment of the environmental impact of a projected fleet of high speed civil transports (HSCTs). The objective of the workshop was to obtain vigorous and critical review of the following topics: (1) atmospheric measurements needed for the assessment; (2) present capability for making those measurements; and (3) areas in instrumentation or platform development essential to making the measurements.

Strategic Research to Enable NASA's Exploration Missions Conference and Workshop: Presentations. Volume 1

NASA Technical Reports Server (NTRS)

Nahra, Henry (Compiler)

2004-01-01

Topic presentations are included on the following: biosensors to monitor the health of astronauts, microgravity effects on flammability, fire prevention and suppression, life support topics, waste management topics, heat transfer; gas flow and liquids flow, and combustion studies.

Operator Performance Measurement - Developing Commonality Across Transportation Modes - Proceedings of a September 1994 Workshop

DOT National Transportation Integrated Search

1996-11-01

This report describes the proceedings of the Workshop on Human Factors Research held in Reston, Virginia. The : objectives of the workshop were to: foster an interchange of experience in measuring and analyzing operator performance : data; encourage ...

Workshop on Transition and Unsteady Aspects of Turbomachinery Flows

NASA Technical Reports Server (NTRS)

LaGraff, John E.

2004-01-01

A workshop was organized on the topic of the title and held on August 17-20, 2003 at the Syracuse University Minnowbrook Conference Center in Blue Mountain Lake, New York. Attendance was by invitation only, 47 guests attended and 30 presentations were made. Support was received from NASA Glenn Research Center, the US Air Force Office of Scientific Research, the European Office of Aeronautical Research and Development, the Asian Office of Aeronautical Research and Development and Syracuse University. This workshop was the fourth in a trienniel series beginning in 1993. A publication under a NASA CP 2004-212913 will be issued and include all abstracts. No full written papers were required. This report includes a list of attendees and the program of presentations. The next workshop is scheduled for August 20-23, 2006.

Plans and Example Results for the 2nd AIAA Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Chwalowski, Pawel; Schuster, David M.; Raveh, Daniella; Jirasek, Adam; Dalenbring, Mats

2015-01-01

This paper summarizes the plans for the second AIAA Aeroelastic Prediction Workshop. The workshop is designed to assess the state-of-the-art of computational methods for predicting unsteady flow fields and aeroelastic response. The goals are to provide an impartial forum to evaluate the effectiveness of existing computer codes and modeling techniques, and to identify computational and experimental areas needing additional research and development. This paper provides guidelines and instructions for participants including the computational aerodynamic model, the structural dynamic properties, the experimental comparison data and the expected output data from simulations. The Benchmark Supercritical Wing (BSCW) has been chosen as the configuration for this workshop. The analyses to be performed will include aeroelastic flutter solutions of the wing mounted on a pitch-and-plunge apparatus.

Workshop report - A validation study of Navier-Stokes codes for transverse injection into a Mach 2 flow

NASA Technical Reports Server (NTRS)

Eklund, Dean R.; Northam, G. B.; Mcdaniel, J. C.; Smith, Cliff

1992-01-01

A CFD (Computational Fluid Dynamics) competition was held at the Third Scramjet Combustor Modeling Workshop to assess the current state-of-the-art in CFD codes for the analysis of scramjet combustors. Solutions from six three-dimensional Navier-Stokes codes were compared for the case of staged injection of air behind a step into a Mach 2 flow. This case was investigated experimentally at the University of Virginia and extensive in-stream data was obtained. Code-to-code comparisons have been made with regard to both accuracy and efficiency. The turbulence models employed in the solutions are believed to be a major source of discrepancy between the six solutions.

Experimental Evaluation of an Isolated Synthetic Jet IN Crossflow

NASA Technical Reports Server (NTRS)

Schaeffler, Norman W.; Jenkins, Luther N.; Hepner, Timothy E.

2007-01-01

The second case for this workshop builds upon the isolated synthetic jet of Case 1 by adding a crossflow, with no streamwise pressure gradient, for the developing jet to interact with. Formally, Case 2 examines the interaction of a single, isolated, synthetic jet and a fully turbulent zero-pressure gradient boundary layer. The resulting flow has many of the characteristics that need to be modeled with fidelity if the results of the calculations are to serve as the basis for research and design with active flow control devices. These include the turbulence in the boundary layer, the time-evolution of the large vortical structure emanating from the jet orifice and its subsequent interaction with and distortion by the boundary layer turbulence, and the effect of the suction cycle on the boundary layer flow. In a synthetic jet, the flow through the orifice and out into the outer flowfield alternates between an exhaust and a suction cycle, driven by the contraction and expansion of a cavity internal to the actuator. In the present experiment, the volume changes in the internal cavity are accomplished by replacing one of the rigid walls of the cavity, the wall opposite the orifice exit, with a deformable wall. This flexible wall is driven by a bottom-mounted moveable piston. The piston is driven electro-mechanically. The synthetic jet issues into the external flow through a circular orifice. In the present experiment, this orifice has a diameter of 0.250 inches (6.35 mm). The flow is conceptually similar to that documented in Schaeffler [1]. To document the flow, several measurement techniques were utilized. The upstream boundary conditions (in-flow conditions), and several key phase-averaged velocity profiles were measured with a 3-component laser-Doppler velocimetry system. Phase-averaged velocity field measurements were made with both stereo digital particle image velocimetry and 2-D digital particle image velocimetry as the primary measurement system. Surface pressure measurements were made utilizing an electronically scanned pressure system.

Soil Moisture Project Evaluation Workshop

NASA Technical Reports Server (NTRS)

Gilbert, R. H. (Editor)

1980-01-01

Approaches planned or being developed for measuring and modeling soil moisture parameters are discussed. Topics cover analysis of spatial variability of soil moisture as a function of terrain; the value of soil moisture information in developing stream flow data; energy/scene interactions; applications of satellite data; verifying soil water budget models; soil water profile/soil temperature profile models; soil moisture sensitivity analysis; combinations of the thermal model and microwave; determing planetary roughness and field roughness; how crust or a soil layer effects microwave return; truck radar; and truck/aircraft radar comparison.

An Investigation of Methods to Measure and Predict Biological and Physical Effects of Commercial Navigation Traffic: Workshop II Held in St. Louis, Missouri on 17-18 April 1990

DTIC Science & Technology

1991-04-01

task of measurinig these forces in the natural environment and the increasing need to predict how these forces will ultimately affect the environment...near and beneath a towboat are complex and three-dimensional. These flow conditions are affected by physical conditions such as the shape and size of...a highly quantitative and fruitful line of pure and applied stud- ies of aquatic animal life histories (e.g., Russell Hunter (1953), Fremling (1960

Ship viscous flow: A report on the 1990 SSPA-IIHR Workshop

NASA Technical Reports Server (NTRS)

Patel, Virendra C.; Larsson, Lars

1992-01-01

To assess the state of the art in ship viscous flow computation a Workshop was organized in 1990 by three organizations: SSPA Maritime Consulting AB, Chalmers University of Technology, and the Iowa Institute of Hydraulic Research. Two test cases were specified by the organizers and sent out to all interested research groups, which were asked to submit results in a prescribed format. In September 1990 a meeting was held at Chalmers University of Technology. All results had then been collected and presented in a common format, and the theories based on responses to a questionnaire sent out earlier. During the meeting, each research group was first given the opportunity to briefly introduce their method and results. Thereafter, a considerable time was spent on general discussions on the performance of the different methods considering the differences in the underlying theories. Specific items that were addressed were grid generation, governing equations, boundary conditions, turbulence modelling, and numerical methods. Practical aspects of the results, for instance from the point of view of propeller design, were also discussed. The Workshop Proceedings contain a description of the participating methods, and the results of both test cases. In the present paper, a summary of the Workshop and its results is presented.

Variability in the Propagation Phase of CFD-Based Noise Prediction: Summary of Results From Category 8 of the BANC-III Workshop

NASA Technical Reports Server (NTRS)

Lopes, Leonard; Redonnet, Stephane; Imamura, Taro; Ikeda, Tomoaki; Zawodny, Nikolas; Cunha, Guilherme

2015-01-01

The usage of Computational Fluid Dynamics (CFD) in noise prediction typically has been a two part process: accurately predicting the flow conditions in the near-field and then propagating the noise from the near-field to the observer. Due to the increase in computing power and the cost benefit when weighed against wind tunnel testing, the usage of CFD to estimate the local flow field of complex geometrical structures has become more routine. Recently, the Benchmark problems in Airframe Noise Computation (BANC) workshops have provided a community focus on accurately simulating the local flow field near the body with various CFD approaches. However, to date, little effort has been given into assessing the impact of the propagation phase of noise prediction. This paper includes results from the BANC-III workshop which explores variability in the propagation phase of CFD-based noise prediction. This includes two test cases: an analytical solution of a quadrupole source near a sphere and a computational solution around a nose landing gear. Agreement between three codes was very good for the analytic test case, but CFD-based noise predictions indicate that the propagation phase can introduce 3dB or more of variability in noise predictions.

Preface: Current perspectives in modelling, monitoring, and predicting geophysical fluid dynamics

NASA Astrophysics Data System (ADS)

Mancho, Ana M.; Hernández-García, Emilio; López, Cristóbal; Turiel, Antonio; Wiggins, Stephen; Pérez-Muñuzuri, Vicente

2018-02-01

The third edition of the international workshop Nonlinear Processes in Oceanic and Atmospheric Flows was held at the Institute of Mathematical Sciences (ICMAT) in Madrid from 6 to 8 July 2016. The event gathered oceanographers, atmospheric scientists, physicists, and applied mathematicians sharing a common interest in the nonlinear dynamics of geophysical fluid flows. The philosophy of this meeting was to bring together researchers from a variety of backgrounds into an environment that favoured a vigorous discussion of concepts across different disciplines. The present Special Issue on Current perspectives in modelling, monitoring, and predicting geophysical fluid dynamics contains selected contributions, mainly from attendants of the workshop, providing an updated perspective on modelling aspects of geophysical flows as well as issues on prediction and assimilation of observational data and novel tools for describing transport and mixing processes in these contexts. More details on these aspects are discussed in this preface.

Modeling hazardous mass flows Geoflows09: Mathematical and computational aspects of modeling hazardous geophysical mass flows; Seattle, Washington, 9–11 March 2009

USGS Publications Warehouse

Iverson, Richard M.; LeVeque, Randall J.

2009-01-01

A recent workshop at the University of Washington focused on mathematical and computational aspects of modeling the dynamics of dense, gravity-driven mass movements such as rock avalanches and debris flows. About 30 participants came from seven countries and brought diverse backgrounds in geophysics; geology; physics; applied and computational mathematics; and civil, mechanical, and geotechnical engineering. The workshop was cosponsored by the U.S. Geological Survey Volcano Hazards Program, by the U.S. National Science Foundation through a Vertical Integration of Research and Education (VIGRE) in the Mathematical Sciences grant to the University of Washington, and by the Pacific Institute for the Mathematical Sciences. It began with a day of lectures open to the academic community at large and concluded with 2 days of focused discussions and collaborative work among the participants.

Vorticity Distributions in Unsteady Flow Separation

DTIC Science & Technology

1988-11-08

a significant result, which was presented at the Unsteady Separated Flow Workshop at the Air Force Academy last July, and which is ready for...i~~A’I C amsi4 61102F 2307 A2 11 Ti-,LE (Incluce Security Claw fication) Vorticity Distributions in Unsteady Flow Separation 12 PERSONAL AUTHOR(S...LSIIAINO HSPG / UNCLASSIFIED Report MEUA-IT-88-2 VORTICITY DISTRIBUTIONS IN UNSTEADY FLOW SEPARATION Frederick S. Sherman Department of Mechanical

Introduction to Field Water-Quality Methods for the Collection of Metals - 2007 Project Summary

USGS Publications Warehouse

Allen, Monica L.

2008-01-01

The U.S. Geological Survey (USGS), Region VI of the U.S. Environmental Protection Agency (USEPA), and the Osage Nation presented three 3-day workshops, in June-August 2007, entitled ?Introduction to Field Water-Quality Methods for the Collection of Metals.? The purpose of the workshops was to provide instruction to tribes within USEPA Region VI on various USGS surface-water measurement methods and water-quality sampling protocols for the collection of surface-water samples for metals analysis. Workshop attendees included members from over 22 tribes and pueblos. USGS instructors came from Oklahoma, New Mexico, and Georgia. Workshops were held in eastern and south-central Oklahoma and New Mexico and covered many topics including presampling preparation, water-quality monitors, and sampling for metals in surface water. Attendees spent one full classroom day learning the field methods used by the USGS Water Resources Discipline and learning about the complexity of obtaining valid water-quality and quality-assurance data. Lectures included (1) a description of metal contamination sources in surface water; (2) introduction on how to select field sites, equipment, and laboratories for sample analysis; (3) collection of sediment in surface water; and (4) utilization of proper protocol and methodology for sampling metals in surface water. Attendees also were provided USGS sampling equipment for use during the field portion of the class so they had actual ?hands-on? experience to take back to their own organizations. The final 2 days of the workshop consisted of field demonstrations of current USGS water-quality sample-collection methods. The hands-on training ensured that attendees were exposed to and experienced proper sampling procedures. Attendees learned integrated-flow techniques during sample collection, field-property documentation, and discharge measurements and calculations. They also used enclosed chambers for sample processing and collected quality-assurance samples to verify their techniques. Benefits of integrated water-quality sample-collection methods are varied. Tribal environmental programs now have the ability to collect data that are comparable across watersheds. The use of consistent sample collection, manipulation, and storage techniques will provide consistent quality data that will enhance the understanding of local water resources. The improved data quality also will help the USEPA better document the condition of the region?s water. Ultimately, these workshops equipped tribes to use uniform sampling methods and to provide consistent quality data that are comparable across the region.

Aerospace Thematic Workshop (4th): Fundamentals of Aerodynamic Flow and Combustion Control by Plasmas

DTIC Science & Technology

2013-04-01

Supersonic Flow Control by Microwave Discharge and Non-equilibrium Processes in Viscous Gas Flows Elena Kustova (Saint Petersburg State University...implying new technologies (direct injection, turbocharging, exhaust gas recirculation, ...) and introducing new physics ( liquid films, flame propagation...combustion  Discharges physics and kinetics A visit was also organized in the afternoon of April 10 to the supersonic and hypersonic wind tunnels

Proceedings of the OECD/CSNI workshop on transient thermal-hydraulic and neutronic codes requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebert, D.

1997-07-01

This is a report on the CSNI Workshop on Transient Thermal-Hydraulic and Neutronic Codes Requirements held at Annapolis, Maryland, USA November 5-8, 1996. This experts` meeting consisted of 140 participants from 21 countries; 65 invited papers were presented. The meeting was divided into five areas: (1) current and prospective plans of thermal hydraulic codes development; (2) current and anticipated uses of thermal-hydraulic codes; (3) advances in modeling of thermal-hydraulic phenomena and associated additional experimental needs; (4) numerical methods in multi-phase flows; and (5) programming language, code architectures and user interfaces. The workshop consensus identified the following important action items tomore » be addressed by the international community in order to maintain and improve the calculational capability: (a) preserve current code expertise and institutional memory, (b) preserve the ability to use the existing investment in plant transient analysis codes, (c) maintain essential experimental capabilities, (d) develop advanced measurement capabilities to support future code validation work, (e) integrate existing analytical capabilities so as to improve performance and reduce operating costs, (f) exploit the proven advances in code architecture, numerics, graphical user interfaces, and modularization in order to improve code performance and scrutibility, and (g) more effectively utilize user experience in modifying and improving the codes.« less

Multiphase Flow in Power and Propulsion Workshop Fluid Stability and Dynamics Workshop: Overview

NASA Technical Reports Server (NTRS)

Singh, Bhim

2003-01-01

The short term purpose of this research is to present a research plan and a roadmap developed for strategic research for the Office of Biological and Physical Research and the long term purpose is to conduct necessary ground-based and space-flight low gravity experiments, complemented by analyses, resulting in a documented framework for parameter prediction of needed by designers. This paper is presented in viewgraph form.

Summary of the Tandem Cylinder Solutions from the Benchmark Problems for Airframe Noise Computations-I Workshop

NASA Technical Reports Server (NTRS)

Lockard, David P.

2011-01-01

Fifteen submissions in the tandem cylinders category of the First Workshop on Benchmark problems for Airframe Noise Computations are summarized. Although the geometry is relatively simple, the problem involves complex physics. Researchers employed various block-structured, overset, unstructured and embedded Cartesian grid techniques and considerable computational resources to simulate the flow. The solutions are compared against each other and experimental data from 2 facilities. Overall, the simulations captured the gross features of the flow, but resolving all the details which would be necessary to compute the noise remains challenging. In particular, how to best simulate the effects of the experimental transition strip, and the associated high Reynolds number effects, was unclear. Furthermore, capturing the spanwise variation proved difficult.

Thermal Analysis of Cryogenic Hydrogen Liquid Separator

NASA Technical Reports Server (NTRS)

Congiardo, Jared F.; Fortier, Craig R. (Editor)

2014-01-01

During launch for the new Space Launch System (SLS) liquid hydrogen is bleed through the engines during replenish, pre-press, and extended pre-press to condition the engines prior to launch. The predicted bleed flow rates are larger than for the shuttle program. A consequence of the increased flow rates is having liquif hydrogen in the vent system, which the facilities was never designed to handle. To remedy the problem a liquid separator is being designed in the system to accumulated the liquid propellant and protect the facility flare stack (which can only handle gas). The attached document is a presentation of the current thermalfluid analysis performed for the separator and will be presented at the Thermal and Fluid Analysis Workshop (NASA workshop) next week in Cleveland, Ohio.

Observations on CFD Verification and Validation from the AIAA Drag Prediction Workshops

NASA Technical Reports Server (NTRS)

Morrison, Joseph H.; Kleb, Bil; Vassberg, John C.

2014-01-01

The authors provide observations from the AIAA Drag Prediction Workshops that have spanned over a decade and from a recent validation experiment at NASA Langley. These workshops provide an assessment of the predictive capability of forces and moments, focused on drag, for transonic transports. It is very difficult to manage the consistency of results in a workshop setting to perform verification and validation at the scientific level, but it may be sufficient to assess it at the level of practice. Observations thus far: 1) due to simplifications in the workshop test cases, wind tunnel data are not necessarily the “correct” results that CFD should match, 2) an average of core CFD data are not necessarily a better estimate of the true solution as it is merely an average of other solutions and has many coupled sources of variation, 3) outlier solutions should be investigated and understood, and 4) the DPW series does not have the systematic build up and definition on both the computational and experimental side that is required for detailed verification and validation. Several observations regarding the importance of the grid, effects of physical modeling, benefits of open forums, and guidance for validation experiments are discussed. The increased variation in results when predicting regions of flow separation and increased variation due to interaction effects, e.g., fuselage and horizontal tail, point out the need for validation data sets for these important flow phenomena. Experiences with a recent validation experiment at NASA Langley are included to provide guidance on validation experiments.

PROCEEDINGS OF RIKEN/BNL RESEARCH CENTER WORKSHOP FUTURE TRANSVERSITY MEASUREMENTS (VOLUME 29).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boer, D.; Grosse Perdekamp, M.

2001-01-02

The RIKEN-BNL Research Center workshop on ''Future Transversity Measurements'' was held at BNL from September 18-20, 2000. The main goal of the workshop was to explore future measurements of transversity distributions. This issue is of importance to the RHIC experiments, which will study polarized proton-proton collisions with great precision. One of the workshop's goals was to enhance interactions between the DIS community at HERA and the spin community at RHIC in this field. The workshop has been well received by the participants; the number of 69 registered participants demonstrates broad interest in the workshop's topics. The program contained 35 talksmore » and there was ample time for lively discussions. The program covered all recent work in the field and in addition some very elucidating educational talks were given. At the workshop the present status of the field was discussed and it has succeeded in stimulating new experimental and theoretical studies (e.g. model calculations for interference fragmentation functions (IFF), IFF analysis at DELPHI). It also functioned to focus attention on the open questions that need to be resolved for near future experiments. In general, the conclusions were optimistic, i.e. measuring the transversity functions seems to be possible, although some new experimental hurdles will have to be taken.« less

Snow on Sea Ice Workshop - An Icy Meeting of the Minds: Modelers and Measurers

DTIC Science & Technology

2015-09-30

1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Snow on Sea Ice Workshop - An Icy Meeting of the Minds...workshop was to promote more seamless and better integration between measurements and modeling of snow on sea ice , thereby improving our predictive...capabilities for sea ice . OBJECTIVES The key objective was to improve the ability of modelers and measurers work together closely. To that end, we

Minnowbrook IV: 2003 Workshop on Transition and Unsteady Aspects of Turbomachinery Flows

NASA Technical Reports Server (NTRS)

LaGraff, John E. (Editor); Ashpis, David E.

2004-01-01

This Minnowbrook IV 2003 workshop on Transition and Unsteady Aspects of Turbomachinery Flows includes the following topics: 1) Current Issues in Unsteady Turbomachinery Flows; 2) Global Instability and Control of Low-Pressure Turbine Flows; 3) Influence of End Wall Leakage on Secondary Flow Development in Axial Turbines; 4) Active and Passive Flow Control on Low Pressure Turbine Airfoils; 5) Experimental and Numerical Investigation of Transitional Flows as Affected by Passing Wakes; 6) Effects of Freestream Turbulence on Turbine Blade Heat Transfer; 7) Bypass Transition Via Continuous Modes and Unsteady Effects on Film Cooling; 8) High Frequency Surface Heat Flux Imaging of Bypass Transition; 9) Skin Friction and Heat Flux Oscillations in Upstream Moving Wave Packets; 10) Transition Mechanisms and Use of Surface Roughness to Enhance the Benefits of Wake Passing in LP Turbines; 11) Transient Growth Approach to Roughness-Induced Transition; 12) Roughness- and Freestream-Turbulence-Induced Transient Growth as a Bypass Transition Mechanism; 13) Receptivity Calculations as a Means to Predicting Transition; 14) On Streamwise Vortices in a Curved Wall Jet and Their Effect on the Mean Flow; 15) Plasma Actuators for Separation Control of Low Pressure Turbine Blades; 16) Boundary-Layer Separation Control Under Low-Pressure-Turbine Conditions Using Glow-Discharge Plasma Actuators; 17) Control of Separation for Low Pressure Turbine Blades: Numerical Simulation; 18) Effects of Elevated Free-Stream Turbulence on Active Control of a Separation Bubble; 19) Wakes, Calming and Transition Under Strong Adverse Pressure Gradients; 20) Transitional Bubble in Periodic Flow Phase Shift; 21) Modelling Spots: The Calmed Region, Pressure Gradient Effects and Background; 22) Modeling of Unsteady Transitional Flow on Axial Compressor Blades; 23) Challenges in Predicting Component Efficiencies in Turbomachines With Low Reynolds Number Blading; 24) Observations on the Causal Relationship Between Blade Count and Developing Rotating Stall in a Four Stage Axial Compressor; 25) Experimental and Numerical Study of Non-Linear Interactions in Transonic Nozzle Flow; 26) Clocking Effects on a Modern Stage and One-Half Transonic Turbine; 27) DNS and LES of Transition on Turbine Blades; 28) The Use of Cellular Automata in Modeling the Transition; 29) Predicting Unsteady Buffet Onset Using RANS Solutions; 30) Transition Modelling With the SST Turbulence Model and an Intermittency Transport; and 31) Equation Workshop Summary Transcript

Rayleigh Scattering Diagnostics Workshop

NASA Technical Reports Server (NTRS)

Seasholtz, Richard (Compiler)

1996-01-01

The Rayleigh Scattering Diagnostics Workshop was held July 25-26, 1995 at the NASA Lewis Research Center in Cleveland, Ohio. The purpose of the workshop was to foster timely exchange of information and expertise acquired by researchers and users of laser based Rayleigh scattering diagnostics for aerospace flow facilities and other applications. This Conference Publication includes the 12 technical presentations and transcriptions of the two panel discussions. The first panel was made up of 'users' of optical diagnostics, mainly in aerospace test facilities, and its purpose was to assess areas of potential applications of Rayleigh scattering diagnostics. The second panel was made up of active researchers in Rayleigh scattering diagnostics, and its purpose was to discuss the direction of future work.

Google Earth for Landowners: Insights from Hands-on Workshops

ERIC Educational Resources Information Center

Huff, Tristan

2014-01-01

Google Earth is an accessible, user-friendly GIS that can help landowners in their management planning. I offered hands-on Google Earth workshops to landowners to teach skills, including mapmaking, length and area measurement, and database management. Workshop participants were surveyed at least 6 months following workshop completion, and learning…

Application of the Galerkin/least-squares formulation to the analysis of hypersonic flows. II - Flow past a double ellipse

NASA Technical Reports Server (NTRS)

Chalot, F.; Hughes, T. J. R.; Johan, Z.; Shakib, F.

1991-01-01

A finite element method for the compressible Navier-Stokes equations is introduced. The discretization is based on entropy variables. The methodology is developed within the framework of a Galerkin/least-squares formulation to which a discontinuity-capturing operator is added. Results for four test cases selected among those of the Workshop on Hypersonic Flows for Reentry Problems are presented.

Application of the Galerkin/least-squares formulation to the analysis of hypersonic flows. I - Flow over a two-dimensional ramp

NASA Technical Reports Server (NTRS)

Chalot, F.; Hughes, T. J. R.; Johan, Z.; Shakib, F.

1991-01-01

An FEM for the compressible Navier-Stokes equations is introduced. The discretization is based on entropy variables. The methodology is developed within the framework of a Galerkin/least-squares formulation to which a discontinuity-capturing operator is added. Results for three test cases selected among those of the Workshop on Hypersonic Flows for Reentry Problems are presented.

The FAIR-INNOVATION dissemination project.

PubMed

Gormley, R

2001-08-01

The goal of the FAIR-INNOVATION dissemination project (FLAIR-FLOW 3) (1997-2000) was to disseminate R&D results from the EU FAIR programme to small and medium-sized food enterprises (SMEs), health professionals (HPs) and consumer groups (CGs) in 19 European countries. The dissemination routes were: (i) one-page technical documents on research results; (ii) their reproduction on the internet; (iii) their reproduction in journals Europe-wide; (iv) workshops on results from EU-supported food research programmes; and (v) lectures and poster presentations by FLAIR-FLOW network personnel. Of the 135 one-pagers produced, 62% were targeted at SMEs, 18% at HPs and 5% at CGs. The remaining 15% were on food safety and were common to the three target groups. There were 1047 publications arising from one-pages in trade journals, and over 8000 requests (paper route) were received for follow-up information. These were in addition to 240 k downloads from the FLAIR-FLOW 3 web site (www.flair-flow.com). Initiatives for HPs included specially collated versions of the one-pagers for major conferences, 20 focused workshops, and interaction with the European Federation of Associations of Dieticians. Currently, dissemination is continuing through FLAIR-FLOW 4 (2001-2003) in 24 countries. FLAIR-FLOW 4 is co-ordinated by M. Jean François Quillien from INRA-CRIAA (FR) at criaa@rennes.inra.fr.

1997 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift

NASA Technical Reports Server (NTRS)

Baize, Daniel G. (Editor)

1999-01-01

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag, prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executives summaries for all the Aerodynamic Performance technology areas.

1997 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

Baize, Daniel G. (Editor)

1999-01-01

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in area of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodyamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.

Twelfth Thermal and Fluids Analysis Workshop

NASA Technical Reports Server (NTRS)

Majumdar, Alok (Compiler)

2002-01-01

The Twelfth Thermal and Fluids Analysis Workshop (TFAWS 01) was held at the Bevill Center, The University of Alabama in Huntsville, Huntsville, Alabama, September 10-14, 2001. The theme for the hands-on training workshop and conference was "Engineering Excellence and Advances in the New Millenium." Forty-five technical papers were presented in four sessions: (1) Thermal Spacecraft/Payloads, (2) Thermal Propulsion/Vehicles, (3) Interdisciplinary Papers, and (4) Fluids Papers. Thirty-nine papers were published in these proceedings. The remaining six papers were not available in electronic format at the time of publication. In addition to the technical papers, there were (a) nine hands-on classes on thermal and flow analyses software, (b) thirteen short courses and product overview lectures, (c) five keynote lectures and, (d) panel discussions consisting of eight presentations. The workshop resulted in participation of 195 persons representing NASA Centers, Government agencies, aerospace industries, academia, software providers, and private corporations.

1997 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

Baize, Daniel G. (Editor)

1999-01-01

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.

1997 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

Baize, Daniel G. (Editor)

1999-01-01

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in area of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.

The Tenth Thermal and Fluids Analysis Workshop

NASA Technical Reports Server (NTRS)

Majumdar, Alok (Compiler); McConnaughey, Paul (Technical Monitor)

2001-01-01

The Tenth Thermal arid Fluids Analysis Workshop (TFAWS 99) was held at the Bevill Center, University of Alabama in Huntsville, Huntsville, Alabama, September 13-17, 1999. The theme for the hands-on training workshop and conference was "Tools and Techniques Contributing to Engineering Excellence". Forty-seven technical papers were presented in four sessions. The sessions were: (1) Thermal Spacecraft/Payloads, (2) Thermal Propulsion/Vehicles, (3) Interdisciplinary Paper, and (4) Fluids Paper. Forty papers were published in these proceedings. The remaining seven papers were not available in electronic format at the time of publication. In addition to the technical papers, there were (a) nine hands-on classes on thermal and flow analyses software, (b) twelve short courses, (c) thirteen product overview lectures, and (d) three keynote lectures. The workshop resulted in participation of 171 persons representing NASA Centers, Government agencies, aerospace industries, academia, software providers, and private corporations.

Local Measurement of Tropospheric HO(x)

NASA Technical Reports Server (NTRS)

Crosley, David R.

1994-01-01

In March of 1992 a workshop sponsored by NASA and NSF was held at SRI International to assess the current ability to measure atmospheric OH and HO2. The measurement techniques reviewed during the workshop for detection of OH included five laser-induced fluorescence schemes, five laser-based adsorption techniques, and four non-laser methods. Six instruments or instrument concepts for HO2 detection, including chemical amplification, conversion to OH with subsequent OH detection, or direct spectroscopic detection of the HO2 were also discussed. The conclusions from the workshop identify several measurement techniques for OH and HO2 that are ready for field tests. These have the ability to measure the radicals with sufficient sensitivity and accuracy to form meaningful comparison with atmospheric model predictions. The workshop conclusions also include recommendations for informal and formal intercomparison protocols.

Standards and measurements for assessing bone health-workshop report co-sponsored by the International Society for Clinical Densitometry (ISCD) and the National Institute of Standards and Technology (NIST).

PubMed

Bennett, Herbert S; Dienstfrey, Andrew; Hudson, Lawrence T; Oreskovic, Tammy; Fuerst, Thomas; Shepherd, John

2006-01-01

This article reports and discusses the results of the recent ISCD-NIST Workshop on Standards and Measurements for Assessing Bone Health. The purpose of the workshop was to assess the status of efforts to standardize and compare results from dual-energy X-ray absorptiometry (DXA) scans, and then to identify and prioritize ongoing measurement and standards needs.

Workshop on chemical weathering on Mars, part 2

NASA Technical Reports Server (NTRS)

Burns, Roger (Editor); Banin, Amos (Editor)

1992-01-01

The third Mars Surface and Atmosphere Through Time (MSATT) Workshop, which was held 10-12 Sep. 1992, at Cocoa Beach/Cape Kennedy, focused on chemical weathering of the surface of Mars. The 30 papers presented at the workshop described studies of Martian weathering processes based on results from the Viking mission experiments, remote sensing spectroscopic measurements, studies of the shergottite, nakhlite, and chassignite (SNC) meteorites, laboratory measurements of surface analog materials, and modeling of reaction pathways. A summary of the technical sessions is presented and a list of workshop participants is included.

Topic III - Infiltration and Drainage: A section in Joint US Geological Survey, US Nuclear Regulatory Commission workshop on research related to low-level radioactive waste disposal, May 4-6, 1993, National Center, Reston, Virginia; Proceedings (WRI 95-4015)

USGS Publications Warehouse

Prudic, David E.; Gee, Glendon; Stevens, Peter R.; Nicholson, Thomas J.

1996-01-01

Infiltration into and drainage from facilities for the disposal of low-level radioactive wastes is considered the major process by which non-volatile contaminants are transported away from the facilities. The session included 10 papers related to the processes of infiltration and drainage, and to the simulation of flow and transport through the unsaturated zone. The first paper, presented by David Stonestrom, was an overview regarding the application of unsaturated flow theory to infiltration and drainage. Stonestrom posed three basic questions, which are:How well do we know the relevant processes affecting flow and transport?How well can we measure the parametric functions used to quantify flow and transport?How do we treat complexities inherent in field settings?The other nine papers presented during the session gave some insight to these questions. Topics included: laboratory measurement of unsaturated hydraulic conductivities at low water contents, by John Nimmo; use of environmental tracers to identify preferential flow through fractured media and to quantify drainage, by Edmund Prych and Edwin Weeks; field experiments to evaluate relevant processes affecting infiltration and drainage, by Brian Andraski, Glendon Gee, and Peter Wierenga; and the use of determinist'c and stochastic models for simulating flow and transport through heterogeneous sediments, by Richard Hills, Lynn Gelhar, and Shlomo Neuman.

Measurement control workshop instructional materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gibbs, Philip; Crawford, Cary; McGinnis, Brent

2014-04-01

A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

Workshop on Aircraft Surface Representation for Aerodynamic Computation

NASA Technical Reports Server (NTRS)

Gregory, T. J. (Editor); Ashbaugh, J. (Editor)

1980-01-01

Papers and discussions on surface representation and its integration with aerodynamics, computers, graphics, wind tunnel model fabrication, and flow field grid generation are presented. Surface definition is emphasized.

Seals Code Development Workshop

NASA Technical Reports Server (NTRS)

Hendricks, Robert C. (Compiler); Liang, Anita D. (Compiler)

1996-01-01

Seals Workshop of 1995 industrial code (INDSEAL) release include ICYL, GCYLT, IFACE, GFACE, SPIRALG, SPIRALI, DYSEAL, and KTK. The scientific code (SCISEAL) release includes conjugate heat transfer and multidomain with rotordynamic capability. Several seals and bearings codes (e.g., HYDROFLEX, HYDROTRAN, HYDROB3D, FLOWCON1, FLOWCON2) are presented and results compared. Current computational and experimental emphasis includes multiple connected cavity flows with goals of reducing parasitic losses and gas ingestion. Labyrinth seals continue to play a significant role in sealing with face, honeycomb, and new sealing concepts under investigation for advanced engine concepts in view of strict environmental constraints. The clean sheet approach to engine design is advocated with program directions and anticipated percentage SFC reductions cited. Future activities center on engine applications with coupled seal/power/secondary flow streams.

Seals Flow Code Development 1993

NASA Technical Reports Server (NTRS)

Liang, Anita D. (Compiler); Hendricks, Robert C. (Compiler)

1994-01-01

Seals Workshop of 1993 code releases include SPIRALI for spiral grooved cylindrical and face seal configurations; IFACE for face seals with pockets, steps, tapers, turbulence, and cavitation; GFACE for gas face seals with 'lift pad' configurations; and SCISEAL, a CFD code for research and design of seals of cylindrical configuration. GUI (graphical user interface) and code usage was discussed with hands on usage of the codes, discussions, comparisons, and industry feedback. Other highlights for the Seals Workshop-93 include environmental and customer driven seal requirements; 'what's coming'; and brush seal developments including flow visualization, numerical analysis, bench testing, T-700 engine testing, tribological pairing and ceramic configurations, and cryogenic and hot gas facility brush seal results. Also discussed are seals for hypersonic engines and dynamic results for spiral groove and smooth annular seals.

High-Speed Research: 1994 Sonic Boom Workshop. Configuration, Design, Analysis and Testing

NASA Technical Reports Server (NTRS)

McCurdy, David A. (Editor)

1999-01-01

The third High-Speed Research Sonic Boom Workshop was held at NASA Langley Research Center on June 1-3, 1994. The purpose of this workshop was to provide a forum for Government, industry, and university participants to present and discuss progress in their research. The workshop was organized into sessions dealing with atmospheric propagation; acceptability studies; and configuration design, and testing. Attendance at the workshop was by invitation only. The workshop proceedings include papers on design, analysis, and testing of low-boom high-speed civil transport configurations and experimental techniques for measuring sonic booms. Significant progress is noted in these areas in the time since the previous workshop a year earlier. The papers include preliminary results of sonic boom wind tunnel tests conducted during 1993 and 1994 on several low-boom designs. Results of a mission performance analysis of all low-boom designs are also included. Two experimental methods for measuring near-field signatures of airplanes in flight are reported.

Flow cytometry and sorting

NASA Astrophysics Data System (ADS)

Yentsch, Clarice M.

For the first time oceanographers have a tool, known as a flow cytometer and sorter, which is useful for simultaneous measurement of multiple parameters of individual cells and particles at rapid rates. We are now able to exploit the fluorescent capability of pigments and stains as signals to quantify and separate subpopulations of cells and particles in the 1.0 to 150 μm size range. Analysis rates exceed 1000 cells per second and high sensitivity is attained using laser excitation.The addition of this new technology to the ocean sciences will enable researchers to address problems which were previously intractable. The first unit, funded by the Office of Naval Research and the National Science Foundation, will be at Bigelow Laboratory for Ocean Sciences in West Boothbay Harbor, Maine, in the laboratory of Clarice M. Yentsch and David A. Phinney. In anticipation of this award, a workshop course on flow cytometry (FCM) and sorting techniques was held from October 24 through November 1, 1982, at the Bermuda Biological Station.

Minnowbrook II 1997 Workshop on Boundary Layer Transition in Turbomachines

NASA Technical Reports Server (NTRS)

LaGraff John E. (Editor); Ashpis, David E. (Editor)

1998-01-01

The volume contains materials presented at the Minnowbrook II - 1997 Workshop on Boundary Layer Transition in Turbomachines, held at Syracuse University Minnowbrook Conference Center, New York, on September 7-10, 1997. The workshop followed the informal format at the 1993 Minnowbrook I workshop, focusing on improving the understanding of late stage (final breakdown) boundary layer transition, with the engineering application of improving design codes for turbomachinery in mind. Among the physical mechanisms discussed were hydrodynamic instabilities, laminar to turbulent transition, bypass transition, turbulent spots, wake interaction with boundary layers, calmed regions, and separation, all in the context of flow in turbomachinery, particularly in compressors and high and low pressure turbines. Results from experiments, DNS, computation, modeling and theoretical analysis were presented. Abstracts and copies of viewgraphs, a specifically commissioned summation paper prepared after the workshop, and a transcript of the extensive working group reports and discussions are included in this volume. They provide recommendations for future research and clearly highlight the need for continued vigorous research in the technologically important area of transition in turbomachines.

Workshop on Constructal Theory of the Generation of Optimal Flow Configurations Held in Rome, Italy on 17-18 March 2005

DTIC Science & Technology

2005-04-01

14. SUBJECT TERMS EOARD, Optimization, Energy conversion, Constructal theory, Exergy 15. NUMBER OF PAGES 16. PRICE...ang ular ,I~b ,,-ith internal con~e<lion coolin!: 17.15 · Discussion I 20.00 · I Workshop Dinner, R"taurant ~La I’iazzelta~ Frida)’, March 18 (Sala...Aircraft research and design: needs, current work 3. Opportunities for constructal theory in aircraft development Constructal theory (1996) Internal

Healthy young minds: the effects of a 1-hour classroom workshop on mental illness stigma in high school students.

PubMed

Ke, Sally; Lai, Joshua; Sun, Terri; Yang, Michael M H; Wang, Jay Ching Chieh; Austin, Jehannine

2015-04-01

This study aimed to test the effects of a 1-h classroom-based workshop, led by medical students, on mental illness stigma amongst secondary school students. Students (aged 14-17) from three public secondary schools in British Columbia participated in the workshop. A questionnaire measuring stigma (including stereotype endorsement and desire for social distance) was administered immediately before (T1), immediately after (T2), and 1-month after the workshop (T3). A total of 279 students met the study inclusion criteria. Total scores on the stigma scale decreased by 23 % between T1 and T2 (p < 0.01). This was sustained 1-month post-workshop with a 21 % stigma reduction compared to pre-intervention (p < 0.01). This effect was primarily due to improvements in scores that measured desire for social distance. There were no significant changes in scores that measured stereotype endorsement. Adolescents' stigmatizing attitudes can be effectively reduced through a 1-h easily implementable and cost-effective classroom-based workshop led by medical students.

Healthy Young Minds: The Effects of a 1-hour Classroom Workshop on Mental Illness Stigma in High School Students

PubMed Central

Ke, Sally; Lai, Joshua; Sun, Terri; Yang, Michael M. H.; Wang, Jay Ching Chieh; Austin, Jehannine

2014-01-01

Background This study aimed to test the effects of a one-hour classroom-based workshop, led by medical students, on mental illness stigma amongst secondary school students. Method Students (aged 14–17) from three public secondary schools in British Columbia participated in the workshop. A questionnaire measuring stigma (including stereotype endorsement and desire for social distance) was administered immediately before (T1), immediately after (T2), and 1-month post-workshop (T3). Results A total of 279 students met the study inclusion criteria. Total scores on the stigma scale decreased by 23% between T1 and T2 (p<0.01). This was sustained 1-month post-workshop with a 21% stigma reduction compared to pre-intervention (p<0.01). This effect was primarily due to improvements in scores that measured desire for social distance. There were no significant changes in scores that measured stereotype endorsement. Conclusion Adolescents’ stigmatizing attitudes can be effectively reduced through a one-hour easily implementable and cost-effective classroom-based workshop led by medical students. PMID:25017811

Report on the Evaluation Workshop in the Affective Domain, July, 1970.

ERIC Educational Resources Information Center

Lieberman, Marcus; And Others

A report on the evaluation Workshop to define school objectives is presented. The three-week workshop in defining and measuring objectives in the areas of interests, attitudes and values was held at Emerson School in Elmhurst, Illinois. Some questions studied by the workshop group include the following: Can interests, attitudes, and values be…

Proceedings of the Eighteenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1993-01-01

The workshop provided a forum for software practitioners from around the world to exchange information on the measurement, use, and evaluation of software methods, models, and tools. This year, approximately 450 people attended the workshop, which consisted of six sessions on the following topics: the Software Engineering Laboratory, measurement, technology assessment, advanced concepts, process, and software engineering issues in NASA. Three presentations were given in each of the topic areas. The content of those presentations and the research papers detailing the work reported are included in these proceedings. The workshop concluded with a tutorial session on how to start an Experience Factory.

Systems biology and clinical cytomics: The 10th Leipziger Workshop and the 3rd International Workshop on Slide-Based Cytometry, Leipzig, Germany, April 2005.

PubMed

Tárnok, Attila; Valet, Günther K; Emmrich, Frank

2006-01-01

Despite very significant technical and software improvements in flow cytometry (FCM) since the 1980's, the demand for a cytometric technology combining both quantitative cell analysis and morphological documentation in Cytomics became evident. Improvements in microtechnology and computing permit nowadays similar quantitative and stoichiometric single cell-based high-throughput analyses by microscopic instruments, like Slide-Based Cytometry (SBC). SBC and related techniques offer unique tools to perform complex immunophenotyping, thereby enabling diagnostic procedures during early disease stages. Multicolor or polychromatic analysis of cells by SBC is of special importance not only as a cytomics technology platform but also because of low quantities of required reagents and biological material. The exact knowledge of the location of each cell on the slide permits repetitive restaining and reanalysis of specimens. Various separate measurements of the same specimen can be ultimately fused to one database increasing the information obtained per cell. Relocation and optical evaluation of cells as typical SBC feature, can be of integral importance for cytometric analysis, since artifacts can be excluded and morphology of measured cells can be documented. Progress in cell analytic: In the SBC, new horizons can be opened by the new techniques of structural and functional analysis with the high resolution from intracellular and membrane (confocal microscopy, nanoscopy, total internal fluorescence microscopy (TIRFM), and tissue level (tissomics), to organ and organism level (in vivo cytometry, optical whole body imaging). Predictive medicine aims at the detection of changes in patient's state prior to the manifestation of the disease or the complication. Such instances concern immune consequences of surgeries or noninfectious posttraumatic shock in intensive care patients or the pretherapeutic identification of high risk patients in cancer cytostatic therapy. Preventive anti-infectious or anti-shock therapy as well as curative chemotherapy in combination with stem cell transplantation may provide better survival chances for patient at concomitant cost containment. Predictive medicine-guided optimization of therapy could lead to individualized medicine that gives significant therapeutic effect and may lower or abrogate potential therapeutic side effects. The 10th Leipziger Workshop combined with the 3rd International Workshop on SBC aimed to offer new methods in Image- and Slide-Based Cytometry for solutions in clinical research. It moved towards practical applications in the clinics and the clinical laboratory. This development will be continued in 2006 at the upcoming Leipziger Workshop and the International Workshop on Slide-Based Cytometry.

Workshop: Valuing and Managing Ecosystems: Economic Research Sponsored by NSF/EPA (1998)

EPA Pesticide Factsheets

Materials from first workshop in series of Environmental Policy and Economics Workshops. Focus on valuing and managing ecosystems, with papers on use of stated preference methods, examining markets for diverse biologic resources and conservation measures.

Workshop on cancer biometrics: identifying biomarkers and surrogates of cancer in patients: a meeting held at the Masur Auditorium, National Institutes of Health.

PubMed

Lotze, Michael T; Wang, Ena; Marincola, Francesco M; Hanna, Nabil; Bugelski, Peter J; Burns, Christine A; Coukos, George; Damle, Nitin; Godfrey, Tony E; Howell, W Martin; Panelli, Monica C; Perricone, Michael A; Petricoin, Emanuel F; Sauter, Guido; Scheibenbogen, Carmen; Shivers, Steven C; Taylor, D Lansing; Weinstein, John N; Whiteside, Theresa L

2005-01-01

The current excitement about molecular targeted therapies has driven much of the recent dialog in cancer diagnosis and treatment. Particularly in the biologic therapy of cancer, identifiable antigenic T-cell targets restricted by MHC molecules and the related novel stress molecules such as MICA/B and Letal allow a degree of precision previously unknown in cancer therapy. We have previously held workshops on immunologic monitoring and angiogenesis monitoring. This workshop was designed to discuss the state of the art in identification of biomarkers and surrogates of tumor in patients with cancer, with particular emphasis on assays within the blood and tumor. We distinguish this from immunologic monitoring in the sense that it is primarily a measure of the tumor burden as opposed to the immune response to it. Recommendations for intensive investigation and targeted funding to enable such strategies were developed in seven areas: genomic analysis; detection of molecular markers in peripheral blood and lymph node by tumor capture and RT-PCR; serum, plasma, and tumor proteomics; immune polymorphisms; high content screening using flow and imaging cytometry; immunohistochemistry and tissue microarrays; and assessment of immune infiltrate and necrosis in tumors. Concrete recommendations for current application and enabling further development in cancer biometrics are summarized. This will allow a more informed, rapid, and accurate assessment of novel cancer therapies.

Non-Linear Harmonic flow simulations of a High-Head Francis Turbine test case

NASA Astrophysics Data System (ADS)

Lestriez, R.; Amet, E.; Tartinville, B.; Hirsch, C.

2016-11-01

This work investigates the use of the non-linear harmonic (NLH) method for a high- head Francis turbine, the Francis99 workshop test case. The NLH method relies on a Fourier decomposition of the unsteady flow components in harmonics of Blade Passing Frequencies (BPF), which are the fundamentals of the periodic disturbances generated by the adjacent blade rows. The unsteady flow solution is obtained by marching in pseudo-time to a steady-state solution of the transport equations associated with the time-mean, the BPFs and their harmonics. Thanks to this transposition into frequency domain, meshing only one blade channel is sufficient, like for a steady flow simulation. Notable benefits in terms of computing costs and engineering time can therefore be obtained compared to classical time marching approach using sliding grid techniques. The method has been applied for three operating points of the Francis99 workshop high-head Francis turbine. Steady and NLH flow simulations have been carried out for these configurations. Impact of the grid size and near-wall refinement is analysed on all operating points for steady simulations and for Best Efficiency Point (BEP) for NLH simulations. Then, NLH results for a selected grid size are compared for the three different operating points, reproducing the tendencies observed in the experiment.

Least-Squares Spectral Element Solutions to the CAA Workshop Benchmark Problems

NASA Technical Reports Server (NTRS)

Lin, Wen H.; Chan, Daniel C.

1997-01-01

This paper presents computed results for some of the CAA benchmark problems via the acoustic solver developed at Rocketdyne CFD Technology Center under the corporate agreement between Boeing North American, Inc. and NASA for the Aerospace Industry Technology Program. The calculations are considered as benchmark testing of the functionality, accuracy, and performance of the solver. Results of these computations demonstrate that the solver is capable of solving the propagation of aeroacoustic signals. Testing of sound generation and on more realistic problems is now pursued for the industrial applications of this solver. Numerical calculations were performed for the second problem of Category 1 of the current workshop problems for an acoustic pulse scattered from a rigid circular cylinder, and for two of the first CAA workshop problems, i. e., the first problem of Category 1 for the propagation of a linear wave and the first problem of Category 4 for an acoustic pulse reflected from a rigid wall in a uniform flow of Mach 0.5. The aim for including the last two problems in this workshop is to test the effectiveness of some boundary conditions set up in the solver. Numerical results of the last two benchmark problems have been compared with their corresponding exact solutions and the comparisons are excellent. This demonstrates the high fidelity of the solver in handling wave propagation problems. This feature lends the method quite attractive in developing a computational acoustic solver for calculating the aero/hydrodynamic noise in a violent flow environment.

Proceedings of the international workshop on measurement and computation of turbulent nonpremixed flames

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barlow, R.S.

This report documents the proceedings of the International Workshop on Measurement and Computation of Turbulent Nonpremixed Flames, held in Naples, Italy on July 26--27, 1996. Contents include materials that were distributed to participants at the beginning of the workshop, as well as a Summary of Workshop Accomplishments that was generated at the close to this Naples meeting. The Naples workshop involved sixty-one people from eleven countries. The primary objectives were: (1) to select a set of well-documented and relatively simple flames that would be appropriate for collaborative comparisons of model predictions; and (2) to specify common submodels to be usedmore » in these predictions, such that models for the coupling of turbulence and chemistry might be isolated and better understood. Studies involve hydrogen and natural gas fuels. These proceedings are also published on the Web and those interested in the ongoing process of data selection and model comparison should consult the workshop page for the most recent and complete information on these collaborative research efforts. The URL is: http://www/ca.sandia/gov/tdf/Workshop.html.« less

[Characteristics of volatile organic compounds (VOCs) emission from electronic products processing and manufacturing factory].

PubMed

Cui, Ru; Ma, Yong-Liang

2013-12-01

Based on the EPA method T0-11 and 14/15 for measurement of toxic organics in air samples, fast VOCs detector, Summa canister and DNPH absorbent were used to determine the VOCs concentrations and the compositions in the ambient air of the workshops for different processes as well as the emission concentration in the exhaust gas. In all processes that involved VOCs release, concentrations of total VOCs in the workshops were 0.1-0.5 mg x m(-3), 1.5-2.5 mg x m(-3) and 20-200 mg x m(-3) for casting, cutting and painting respectively. Main compositions of VOCs in those workshops were alkanes, eneynes, aromatics, ketones, esters and ethers, totally over 20 different species. The main compositions in painting workshop were aromatics and ketones, among which the concentration of benzene was 0.02-0.34 mg x m(-3), toluene was 0.24-3.35 mg x m(-3), ethyl benzene was 0.04-1.33 mg x m(-3), p-xylene was 0.13-0.96 mg x m(-3), m-xylene was 0.02-1.18 mg x m(-3), acetone was 0.29-15.77 mg x m(-3), 2-butanone was 0.06-22.88 mg x m(-3), cyclohexene was 0.02-25.79 mg x m(-3), and methyl isobutyl ketone was 0-21.29 mg x m(-3). The VOCs emission from painting process was about 14 t x a(-1) for one single manufacturing line, and 840 t x a(-1) for the whole factory. According to the work flows and product processes, the solvent used during painting process was the main source of VOCs emission, and the exhaust gas was the main emission point.

76 FR 1136 - Electroshock Weapons Test and Measurement Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Electroshock Weapons Test and Measurement Workshop AGENCY: National Institute of Standards and Technology (NIST), United States..., law enforcement, corrections, academia, military, test instrument manufacturers, etc.) of electroshock...

Plant Production Systems for Microgravity: Critical Issues in Water, Air, and Solute Transport Through Unsaturated Porous Media

NASA Technical Reports Server (NTRS)

Steinberg, Susan L. (Editor); Ming, Doug W. (Editor); Henninger, Don (Editor)

2002-01-01

This NASA Technical Memorandum is a compilation of presentations and discussions in the form of minutes from a workshop entitled 'Plant Production Systems for Microgravity: Critical Issues in Water, Air, and Solute Transport Through Unsaturated Porous Media' held at NASA's Johnson Space Center, July 24-25, 2000. This workshop arose from the growing belief within NASA's Advanced Life Support Program that further advances and improvements in plant production systems for microgravity would benefit from additional knowledge of fundamental processes occurring in the root zone. The objective of the workshop was to bring together individuals who had expertise in various areas of fluid physics, soil physics, plant physiology, hardware development, and flight tests to identify, discuss, and prioritize critical issues of water and air flow through porous media in microgravity. Participants of the workshop included representatives from private companies involved in flight hardware development and scientists from universities and NASA Centers with expertise in plant flight tests, plant physiology, fluid physics, and soil physics.

Cart3D Simulations for the First AIAA Sonic Boom Prediction Workshop

NASA Technical Reports Server (NTRS)

Aftosmis, Michael J.; Nemec, Marian

2014-01-01

Simulation results for the First AIAA Sonic Boom Prediction Workshop (LBW1) are presented using an inviscid, embedded-boundary Cartesian mesh method. The method employs adjoint-based error estimation and adaptive meshing to automatically determine resolution requirements of the computational domain. Results are presented for both mandatory and optional test cases. These include an axisymmetric body of revolution, a 69deg delta wing model and a complete model of the Lockheed N+2 supersonic tri-jet with V-tail and flow through nacelles. In addition to formal mesh refinement studies and examination of the adjoint-based error estimates, mesh convergence is assessed by presenting simulation results for meshes at several resolutions which are comparable in size to the unstructured grids distributed by the workshop organizers. Data provided includes both the pressure signals required by the workshop and information on code performance in both memory and processing time. Various enhanced techniques offering improved simulation efficiency will be demonstrated and discussed.

Potential Impacts of Hydrokinetic and Wave Energy Conversion Technologies on Aquatic Environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Čada, Glenn F.

2007-04-01

A new generation of hydropower technologies, the kinetic hydro and wave energy conversion devices, offers the possibility of generating electricity from the movements of water, without the need for dams and diversions. The Energy Policy Act of 2005 encouraged the development of these sources of renewable energy in the United States, and there is growing interest in deploying them globally. The technologies that would extract electricity from free-flowing streams, estuaries, and oceans have not been widely tested. Consequently, the U.S. Department of Energy convened a workshop to (1) identify the varieties of hydrokinetic energy and wave energy conversion devices andmore » their stages of development, (2) identify where these technologies can best operate, (3) identify the potential environmental issues associated with these technologies and possible mitigation measures, and (4) develop a list of research needs and/or practical solutions to address unresolved environmental issues. The article reviews the results of that workshop, focusing on potential effects on freshwater, estuarine, and marine ecosystems, and we describe recent national and international developments.« less

Proceedings of the Oak Ridge Electron Linear Accelerator (ORELA) Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunn, M.E.

2006-02-27

The Oak Ridge National Laboratory (ORNL) organized a workshop at ORNL July 14-15, 2005, to highlight the unique measurement capabilities of the Oak Ridge Electron Linear Accelerator (ORELA) facility and to emphasize the important role of ORELA for performing differential cross-section measurements in the low-energy resonance region that is important for nuclear applications such as nuclear criticality safety, nuclear reactor and fuel cycle analysis, stockpile stewardship, weapons research, medical diagnosis, and nuclear astrophysics. The ORELA workshop (hereafter referred to as the Workshop) provided the opportunity to exchange ideas and information pertaining to nuclear cross-section measurements and their importance for nuclearmore » applications from a variety of perspectives throughout the U.S. Department of Energy (DOE). Approximately 50 people, representing DOE, universities, and seven U.S. national laboratories, attended the Workshop. The objective of the Workshop was to emphasize the technical community endorsement for ORELA in meeting nuclear data challenges in the years to come. The Workshop further emphasized the need for a better understanding of the gaps in basic differential nuclear measurements and identified the efforts needed to return ORELA to a reliable functional measurement facility. To accomplish the Workshop objective, nuclear data experts from national laboratories and universities were invited to provide talks emphasizing the unique and vital role of the ORELA facility for addressing nuclear data needs. ORELA is operated on a full cost-recovery basis with no single sponsor providing complete base funding for the facility. Consequently, different programmatic sponsors benefit by receiving accurate cross-section data measurements at a reduced cost to their respective programs; however, leveraging support for a complex facility such as ORELA has a distinct disadvantage in that the programmatic funds are only used to support program-specific measurements. As a result, ORELA has not received base funding to support major upgrades and significant maintenance operations that are essential to keep the facility in a state of readiness over the long term. As a result, ORELA has operated on a ''sub-bare-minimum'' budget for the past 10 to 15 years, and the facility has not been maintained at a level for continued reliable operation for the long term. During the Workshop, Jerry McKamy (NNSA/NA-117) used a hospital patient metaphor that accurately depicts the facility status. ORELA is currently in the intensive care unit (ICU) on life support, and refurbishment efforts are needed to get the ''patient'' off life support and out to an ordinary hospital room. McKamy further noted that the DOE NCSP is planning to fund immediate refurbishment tasks ($1.5 M over three years) to help reestablish reliable ORELA operation (i.e., move ORELA from ICU to an ordinary hospital room). Furthermore, the NCSP will work to identify and carry out the actions needed to discharge ORELA from the ''hospital'' over the next five to seven years. In accordance with the Workshop objectives, the technical community publicly endorsed the need for a reliable ORELA facility that can meet current and future nuclear data needs. These Workshop proceedings provide the formal documentation of the technical community endorsement for ORELA. Furthermore, the proceedings highlight the past and current contributions that ORELA has made to the nuclear industry. The Workshop further emphasized the operational and funding problems that currently plague the facility, thereby limiting ORELA's operational reliability. Despite the recent operational problems, ORELA is a uniquely capable measurement facility that must be part of the overall U.S. nuclear data measurement portfolio in order to support current and emerging nuclear applications. The Workshop proceedings further emphasize that ORNL, the technical community, and programmatic sponsors are eager to see ORELA reestablish reliable measurement operation and be readily available to address nuclear data challenges in the United States.« less

Workshop on Particle Capture, Recovery and Velocity/Trajectory Measurement Technologies

NASA Technical Reports Server (NTRS)

Zolensky, Michael E. (Editor)

1994-01-01

A workshop on particle capture, recovery, and velocity/trajectory measurement technologies was held. The primary areas covered were: (1) parent-daughter orbit divergence; (2) trajectory sensing; (3) capture medium development: laboratory experiments, and (4) future flight opportunities.

Lab-on-a-chip workshop activities for secondary school students

PubMed Central

Esfahani, Mohammad M. N.; Tarn, Mark D.; Choudhury, Tahmina A.; Hewitt, Laura C.; Mayo, Ashley J.; Rubin, Theodore A.; Waller, Mathew R.; Christensen, Martin G.; Dawson, Amy; Pamme, Nicole

2016-01-01

The ability to engage and inspire younger generations in novel areas of science is important for bringing new researchers into a burgeoning field, such as lab-on-a-chip. We recently held a lab-on-a-chip workshop for secondary school students, for which we developed a number of hands-on activities that explained various aspects of microfluidic technology, including fabrication (milling and moulding of microfluidic devices, and wax printing of microfluidic paper-based analytical devices, so-called μPADs), flow regimes (gradient formation via diffusive mixing), and applications (tissue analysis and μPADs). Questionnaires completed by the students indicated that they found the workshop both interesting and informative, with all activities proving successful, while providing feedback that could be incorporated into later iterations of the event. PMID:26865902

Static and Dynamic Flow Visualization Studies of Two Double-Delta Wing Models at High Angles of Attack

DTIC Science & Technology

1992-03-01

body, ft U.= free-stream velocity, ft/sec In the case of a wing pitching about its mid-chord location, it can be interpreted as the ratio of the...Over Moderately Swept Delta Wings," HTP -5 Workshop On Vortical Flow Breakdown and Structural Interactions, NASA Langley Research Center, August 15-16...January 6- 9,1992/Reno,Nevada. 18. User’s Manual , Flow Visualization Water Tunnel Operation for Model 1520, Eidelic International, Inc., Torrance

Comparing Alternative U.S. Counterterrorism Strategies: Can Assumption-Based Planning Help Elevate the Debate?

DTIC Science & Technology

2008-01-01

lay workshop employed survey research techniques with the participants to attempt to measure ABP’s effect on their debate. The workshops examined three...gave written surveys to all par- ticipants before and after the lay workshop to measure how they responded to the experience and how it affected...IR&D funds that made this effort possible. xv Abbreviations ABP assumption-based planning the League League of Women Voters RDM robust

Laser Doppler Velocimetry Workshop

NASA Technical Reports Server (NTRS)

Owen, R. B.

1979-01-01

The potential of laser Doppler velocimetry as a technique for use in mapping flows in the several fluid systems under development for doing research on low-gravity processes, is investigated. Laser Doppler velocimetry techniques, equipment, and applications are summarized.

Summary Report of the Workshop on The Experimental Nuclear Reaction Data Database

DOE Office of Scientific and Technical Information (OSTI.GOV)

Semkova, V.; Pritychenko, B.

2014-12-01

The Workshop on the Experimental Nuclear Reaction Data Database (EXFOR) was held at IAEA Headquarters in Vienna from 6 to 10 October 2014. The workshop was organized to discuss various aspects of the EXFOR compilation process including compilation rules, different techniques for nuclear reaction data measurements, software developments, etc. A summary of the presentations and discussions that took place during the workshop is reported here.

33 CFR 157.12f - Workshop functional test requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CARRYING OIL IN BULK Design, Equipment, and Installation § 157.12f Workshop functional test requirements... the specific design of equipment. A completed workshop certificate including the delivery test... several ppm values on all measurement scales when operated on an oil appropriate for the application of...

33 CFR 157.12f - Workshop functional test requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... CARRYING OIL IN BULK Design, Equipment, and Installation § 157.12f Workshop functional test requirements... the specific design of equipment. A completed workshop certificate including the delivery test... several ppm values on all measurement scales when operated on an oil appropriate for the application of...

Workshop: Using Contingent Valuation to Measure Non-Market Values (1994)

EPA Pesticide Factsheets

Workshop co-hosted by USEPA and Dept of Energy on using contingent valuation to measure non-market values for improvement in health and the environment. Includes transcripts of presentations and discussion by attendees, later published as a book.

Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 2

NASA Technical Reports Server (NTRS)

Jones, Gregory S. (Editor); Joslin, Ronald D. (Editor)

2005-01-01

This conference proceeding is comprised of papers that were presented at the NASA/ONR Circulation Control Workshop held 16-17 March 2004 at the Radisson-Hampton in Hampton, VA. Over two full days, 30 papers and 4 posters were presented with 110 scientists and engineers in attendance, representing 3 countries. As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs, and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the state-of-the-art in circulation control and to assess the future directions and applications for circulation control. The 2004 workshop addressed applications, experiments, computations, and theories related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of single session oral presentations, posters, and written papers that are documented in this unclassified conference proceeding. The format of this written proceeding follows the agenda of the workshop. Each paper is followed with the presentation given at the workshop. the editors compiled brief summaries for each effort that is at the end of this proceeding. These summaries include the paper, oral presentation, and questions or comments that occurred during the workshop. The 2004 Circulation Control Workshop focused on applications including Naval vehicles (Surface and Underwater vehicles), Fixed Wing Aviation (general aviation, commercial, cargo, and business aircraft); V/STOL platforms (helicopters, military aircraft, tilt rotors); propulsion systems (propellers, jet engines, gas turbines), and ground vehicles (automotive, trucks, and other); wind turbines, and other nontraditional applications (e.g., vacuum cleaner, ceiling fan). As part of the CFD focus area of the 2004 CC Workshop, CFD practitioners were invited to compute a two-dimensional benchmark problem for which geometry, flow conditions, grids, and experimental data were available before the workshop. The purpose was to accumulate a database of simulations for a single problem using a range of CFD codes, turbulence models, and grid strategies so as to expand knowledge of model performance/requirements and guide simulation of practical CC configurations.

Reports of workshops on Probe Measurements of Particles and Radiation in the Atmosphere of Titan

NASA Technical Reports Server (NTRS)

Ragent, Boris (Compiler); Swenson, Byron L. (Compiler)

1990-01-01

The planned 1995 joint ESA-NASA Cassini mission to the Saturnian system will include an atmospheric probe to be dropped into the atmosphere of Titan for in situ measurements during descent. Because of the unique properties of the Titan atmosphere it is necessary to consider the peculiar requirements for such measurements and applicable techniques. The proceedings of two workshops dealing with the measurement of particles and radiation in the atmosphere of Titan are presented in two parts. The first part dealt with the measurement of particulate matter in the atmosphere of Titan. The second part dealt with the measurement of radiation in the atmosphere of Titan. The proceedings were first published and distributed informally, and are presented with only minor editorial changes. In the report of the particulate matter workshop, discussions of the mission background, the importance of the measurements, and descriptions of the desired information are followed by a description of appropriate measurement techniques and conclusions and recommendations. The proceeding for the workshop on radiation measurement and imaging contains a discussion of the importance of radiation measurements and imaging, and presents a summary of participants' experience with such measurements made from entry probes. This is followed by a description of appropriate measurement techniques and conclusions and recommendations.

Fourth Airborne Geoscience Workshop

NASA Technical Reports Server (NTRS)

1991-01-01

The focus of the workshop was on how the airborne community can assist in achieving the goals of the Global Change Research Program. The many activities that employ airborne platforms and sensors were discussed: platforms and instrument development; airborne oceanography; lidar research; SAR measurements; Doppler radar; laser measurements; cloud physics; airborne experiments; airborne microwave measurements; and airborne data collection.

Mars: Past, Present, and Future. Results from the MSATT Program, part 1

NASA Technical Reports Server (NTRS)

Haberle, R. M. (Editor)

1993-01-01

This volume contains papers that were accepted for presentation at the workshop on Mars: Past, Present, and Future -- Results from the MSATT Program. Topics include, but are not limited to: Martian impact craters; thermal emission measurements of Hawaiian palagonitic soils with implications for Mars; thermal studies of the Martian surface; Martian atmospheric composition studies; temporal and spatial mapping of Mars' atmospheric dust opacity and surface albedo; studies of atmospheric dust from Viking IR thermal mapper data; the distribution of Martian ground ice at other epochs; numerical simulation of thermally induced near-surface flows over Martian terrain; the pH of Mars; the mineralogic evolution of the Martian surface through time; geologic controls of erosion and sedimentation on Mars; and dielectric properties of Mars' surface: proposed measurement on a Mars Lander.

Minnowbrook VI: 2009 Workshop on Flow Physics and Control for Internal and External Aerodynamics

NASA Technical Reports Server (NTRS)

LaGraff, John E.; Povinelli, Louis A.; Gostelow, J. Paul; Glauser, Mark

2010-01-01

Topics covered include: Flow Physics and control for Internal and External Aerodynamics (not in TOC...starts on pg13); Breaking CFD Bottlenecks in Gas-Turbine Flow-Path Design; Streamwise Vortices on the Convex Surfaces of Circular Cylinders and Turbomachinery Blading; DNS and Embedded DNS as Tools for Investigating Unsteady Heat Transfer Phenomena in Turbines; Cavitation, Flow Structure and Turbulence in the Tip Region of a Rotor Blade; Development and Application of Plasma Actuators for Active Control of High-Speed and High Reynolds Number Flows; Active Flow Control of Lifting Surface With Flap-Current Activities and Future Directions; Closed-Loop Control of Vortex Formation in Separated Flows; Global Instability on Laminar Separation Bubbles-Revisited; Very Large-Scale Motions in Smooth and Rough Wall Boundary Layers; Instability of a Supersonic Boundary-Layer With Localized Roughness; Active Control of Open Cavities; Amplitude Scaling of Active Separation Control; U.S. Air Force Research Laboratory's Need for Flow Physics and Control With Applications Involving Aero-Optics and Weapon Bay Cavities; Some Issues Related to Integrating Active Flow Control With Flight Control; Active Flow Control Strategies Using Surface Pressure Measurements; Reduction of Unsteady Forcing in a Vaned, Contra-Rotating Transonic Turbine Configuration; Active Flow Control Stator With Coanda Surface; Controlling Separation in Turbomachines; Flow Control on Low-Pressure Turbine Airfoils Using Vortex Generator Jets; Reduced Order Modeling Incompressible Flows; Study and Control of Flow Past Disk, and Circular and Rectangular Cylinders Aligned in the Flow; Periodic Forcing of a Turbulent Axisymmetric Wake; Control of Vortex Breakdown in Critical Swirl Regime Using Azimuthal Forcing; External and Turbomachinery Flow Control Working Group; Boundary Layers, Transitions and Separation; Efficiency Considerations in Low Pressure Turbines; Summary of Conference; and Final Plenary Session Transcript.

77 FR 49447 - Endpoints for Clinical Trials in Kidney Transplantation; Public Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-16

...] Endpoints for Clinical Trials in Kidney Transplantation; Public Workshop AGENCY: Food and Drug... public workshop to discuss the endpoints for clinical trials of drugs and therapeutic biologics in kidney... trials of kidney transplantation. The meeting will include a discussion of measure of patient and graft...

76 FR 45271 - Review and Qualification of Clinical Outcome Assessments; Public Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-28

... announcing a public workshop to discuss measurement principles for clinical outcome assessments (COAs) for... appropriate drug development program. Because the qualification process is separate from the drug marketing... other DDTs. This workshop will focus on FDA review principles specific to all type of COAs, i.e., PRO...

On the Cutting Edge: Face-to-Face and Virtual Professional Development for Current and Future Geoscience Faculty

NASA Astrophysics Data System (ADS)

Macdonald, H.; Manduca, C. A.; Mogk, D. W.; Tewksbury, B. J.; Iverson, E. A.; Kirk, K. B.; Beane, R. J.; McConnell, D.; Wiese, K.; Wysession, M. E.

2011-12-01

On the Cutting Edge, a comprehensive, discipline-wide professional development program for current and future geoscience faculty, aims to develop a geoscience professoriate committed to high-quality instruction based on currency in scientific knowledge, good pedagogic practice, and research on learning. Our program provides an integrated workshop series and online teaching resources. Since 2002, we have offered more than 80 face-to-face workshops, virtual workshops and webinars, and hybrid events. Participants come from two-year colleges and four-year colleges and universities. The workshop series is designed to address the needs of faculty in all career stages at the full spectrum of institutions and covering the breadth of the geoscience curriculum. We select timely and compelling topics and create opportunities of interest to faculty. We offer workshops on course design, new geoscience research and pedagogical topics, core geoscience curriculum topics, and introductory courses as well as workshops for early career faculty and for future faculty. Our workshops are designed to model good teaching practice. We set workshop goals that guide workshop planning and evaluation. Workshops are interactive, emphasize participant learning, provide opportunities for participants to interact and share experience/knowledge, provide good resources, give participants time to reflect and to develop action plans, and help transform their ideas about teaching. We emphasize the importance of adaptation in the context of their specific situations. For virtual workshops and webinars we use icebreakers and other structured interactions to build a comfortable workshop community; promote interaction through features on webinar software, chat-aided question and answer, small-group synchronous interactions, and/or discussion boards; plan detailed schedules for workshop events; use asynchronous discussions and recordings of synchronous events given that participants are busy with their daily commitments; and provide sufficient technical support for participants and leaders. The importance of making the workshop useful and immediately applicable does not diminish with virtual events. One key lesson is the need to be purposeful with virtual communication strategies; the discussion boards, chat-aided discussion, and small group interactions need a specific focus, purpose, or product. Both face-to-face and virtual workshops that appear to flow spontaneously reflect extensive planning, a clear understanding of the program and its objectives by everyone involved, and realistic estimates for how long activities will really take. The workshop content and structures that we have developed result in high rates of satisfaction by participants.

FNAS computational fluid dynamics

NASA Technical Reports Server (NTRS)

Ziebarth, John P.

1990-01-01

This work involves the coordination of necessary resources, facilities, and special personnel to provide a workshop to promote the exchange of CFD technology between industry, universities, and government. Critical flow problems have been isolated and simulation of these is being done.

Measurements of Beta Lyrae at the Pine Mountain Observatory Summer Workshop 2011

NASA Astrophysics Data System (ADS)

Carro, Joseph; Chamberlain, Rebecca; Schuler, Marisa; Varney, Timothy; Ewing, Robert; Genet, Russell

2012-04-01

As part of the Pine Mountain Observatory Summer Workshop 2011, high school and college students joined with an experienced observer to learn the use of a telescope, astrometric techniques, and measure a double star. This workshop was the first time these students operated a telescope, and, thus, constituted an educational experience for them as they used the telescope and took the measurements. The double star Beta Lyrae was measured resulting in a separation of 44.3 arc seconds and a position angle of 151.6 degrees. The Washington Double Star catalog (2009 data) lists a separation of 45.4 arc seconds and a position angle of 148 degrees.

Proceedings of a Workshop on Assessment of Techniques for Measuring Tropospheric N sub x O sub y

NASA Technical Reports Server (NTRS)

1983-01-01

Human impact on the troposphere, particularly on the regional to global scale is assessed. One area of required research is instrumentation development, which is aimed at improving the capability to measure important trace gases and aerosols which are key species in the major atmospheric biogeochemical cycles. To focus on specific needs, the Instrumentation Workshop for NxOy Tropospheric Species was conducted. The workshop discussed measurement needs and instrument capabilities for NxOy species, including NO, NO2, HNO3, HNO2, PAN, and NO3 aerosols. The status and measurement capabilities of various techniques (operational as well as conceptual) were discussed, along with future instrument and technology needs.

Comparisons and Limitations of Current Definitions of Bronchopulmonary Dysplasia for the Prematurity and Respiratory Outcomes Program.

PubMed

Poindexter, Brenda B; Feng, Rui; Schmidt, Barbara; Aschner, Judy L; Ballard, Roberta A; Hamvas, Aaron; Reynolds, Anne Marie; Shaw, Pamela A; Jobe, Alan H

2015-12-01

Bronchopulmonary dysplasia is the most common morbidity of prematurity, but the validity and utility of commonly used definitions have been questioned. To compare three commonly used definitions of bronchopulmonary dysplasia in a contemporary prospective, multicenter observational cohort of extremely preterm infants. At 36 weeks postmenstrual age, the following definitions of bronchopulmonary dysplasia were applied to surviving infants with and without imputation: need for supplemental oxygen (Shennan definition), National Institutes of Health Workshop definition, and "physiologic" definition after a room-air challenge. Of 765 survivors assessed at 36 weeks, bronchopulmonary dysplasia was diagnosed in 40.8, 58.6, and 32.0% of infants, respectively, with the Shennan, workshop and physiologic definitions. The number of unclassified infants was lowest with the workshop definition (2.1%) and highest with the physiologic definition (16.1%). After assigning infants discharged home in room air before 36 weeks as no bronchopulmonary dysplasia, the modified Shennan definition compared favorably to the workshop definition, with 2.9% unclassified infants. Newer management strategies with nasal cannula flows up to 4 L/min or more and 0.21 FiO2 at 36 weeks obscured classification of bronchopulmonary dysplasia status in 12.4% of infants. Existing definitions of bronchopulmonary dysplasia differ with respect to ease of data collection and number of unclassifiable cases. Contemporary changes in management of infants, such as use of high-flow nasal cannula, limit application of existing definitions and may result in misclassification. A contemporary definition of bronchopulmonary dysplasia that correlates with respiratory morbidity in childhood is needed. Clinical trial registered with www.clinicaltrials.gov (NCT01435187).

2017 Marine Hydrokinetic Instrumentation Workshop Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driscoll, Frederick R; Mauer, Erik; Rieks, Jeff

The third Marine Hydrokinetic Instrumentation Workshop was held at Florida Atlantic University's Sea Tech Campus in Dania Beach, Florida, from February 28 to March 1, 2017. The workshop brought together 37 experts in marine energy measurement, testing, and technology development to present and discuss the instrumentation and data-processing needs of the marine energy industry. The workshop was comprised of a plenary session followed by two focused breakout sessions. The half-day plenary session reviewed findings from prior instrumentation workshops, presented research activities that aim to fill previously identified gaps, and had industry experts present the state of the marine energy measurementmore » technologies. This report provides further detail on the workshop, objectives, and findings.« less

Area-Based Measurements of Methane Emissions from Oil and Natural Gas Operations- September 2012 Workshop

EPA Pesticide Factsheets

View a presentation on area-based measurements of methane (CH4) emissions, presented at the Stakeholder Workshop on Natural Gas in the Inventory of U.S. Greenhouse Gas (GHG) Emissions and Sinks on Thursday, September 13, 2012.

Geophysics of Geothermal Areas: State of the Art and Future Development

NASA Astrophysics Data System (ADS)

Mabey, Don R.

In May 1980 a workshop organized by the Advanced School of Geophysics of the Ettore Majorana Center for Scientific Culture was held in Erice, Italy. The purpose was to present the state of the art and future development of geophysics as related to exploration for geothermal resources and the environmental impact of the development of geothermal systems. The workshop was addressed to “younger researchers working in scientific institutions and in public or private agencies and who are particularly interested in these aspects of the energy problem.” Fourteen formal lectures were presented to the workshop. This volume contains papers based on 10 of these lectures with a preface, forward, and introduction by the editors. The ten papers are “Heat Transfer in Geothermal Areas,” “Interpretation of Conductive Heat Flow Anomalies,” “Deep Electromagnetic Soundings in Geothermal Exploration,” “A Computation Method for dc Geoelectric Fields,” “Measurement of Ground Deformation in Geothermal Areas,” “Active Seismic Methods in Geothermal Exploration,” “The Role of Geophysical Investigations in the Discovery of the Latera Geothermal Field,” “Geothermal Resources Exploration in the European Community: The Geophysical Case,” “Activity Performed by AGIP (ENI Group) in the Field of Geothermal Energy,” and “Geothermal Exploration in the Western United States.” Six of the authors are from Italy, and one each is from Iceland, the Netherlands, West Germany, and the United States. All of the papers are in English.

Satellite-Derived Sea Surface Temperature: Workshop 3

NASA Technical Reports Server (NTRS)

1985-01-01

This is the third of a series of three workshops, sponsored by the National Aeronautics and Space Administration, to investigate the state of the art in global sea surface temperature measurements from space. Three workshops were necessary to process and analyze sufficient data from which to draw conclusions on the accuracy and reliability of the satellite measurements. In this workshop, the final two (out of a total of four) months of satellite and in situ data chosen for study were processed and evaluated. Results from the AVHRR, HIRS, SMMR, and VAS sensors, in comparison with in situ data from ships, XBTs, and buoys, confirmed satellite rms accuracies in the 0.5 to 1.0 C range, but with variable biases. These accuracies may degrade under adverse conditions for specific sensors. A variety of color maps, plots, and statistical tables are provided for detailed study of the individual sensor SST measurements.

Nanobiotechnology Report of the National Nanotechnology Initiative Workshop, October 9-11, 2003, Arlington, Virginia

DTIC Science & Technology

2005-10-01

pharmacokinetics and pharmacodynamics throughout the body in animals and patients. This can dramatically change the drug discovery process because at...cells), capture them, treat them locally (or eliminate them), monitor the response to therapy, and also provide distributed information flow (e.g...magnetic resonances tracking of magnetically labeled cells after transplantation, Journal of Cerebral Blood Flow and Metabolism 22, 899 (2002). 3. M

Texas Water Quality Board Teachers Workshop Program.

ERIC Educational Resources Information Center

Texas Water Quality Board, Austin.

These materials are designed for teachers participating in an inservice workshop on water quality. Included in the materials are a workshop agenda, a water awareness pretest, and the various parameters and tests that are used to determine and measure water quality. The parameters are discussed from the standpoint of their potential impact to…

Workshop on the Suborbital Science Sounding Rocket Program, Volume 1

NASA Technical Reports Server (NTRS)

1991-01-01

The unique characteristics of the sounding rocket program is described, with its importance to space science stressed, especially in providing UARS correlative measurements. The program provided opportunities to do innovative scientific studies in regions not other wise accessible; it was a testbed for developing new technologies; and its key attributes were flexibility, reliability, and economy. The proceedings of the workshop are presented in viewgraph form, including the objectives of the workshop and the workshop agenda.

Local Ionospheric Measurements Satellite (LionSat)

DTIC Science & Technology

2005-07-01

LionSat)," NASA Third Space Internet Workshop, Cleveland, OH, 4-6 June 2003. ** Graduate Student * Undergraduate Student "LionSat PENNSTATE LionSat 2...Measurements Satellite (UonSat)Lý NASA Third Space Internet MINISTATE Workshop, Cleveland, OH, 4-6 June 2003. University Nanosat-3 Flight Competition Review

The Hospital Microbiome Project: Meeting Report for the 1st Hospital Microbiome Project Workshop on sampling design and building science measurements, Chicago, USA, June 7th-8th 2012

PubMed Central

Smith, Daniel; Alverdy, John; An, Gary; Coleman, Maureen; Garcia-Houchins, Sylvia; Green, Jessica; Keegan, Kevin; Kelley, Scott T.; Kirkup, Benjamin C.; Kociolek, Larry; Levin, Hal; Landon, Emily; Olsiewski, Paula; Knight, Rob; Siegel, Jeffrey; Weber, Stephen; Gilbert, Jack

2013-01-01

This report details the outcome of the 1st Hospital Microbiome Project workshop held on June 7th-8th, 2012 at the University of Chicago, USA. The workshop was arranged to determine the most appropriate sampling strategy and approach to building science measurement to characterize the development of a microbial community within a new hospital pavilion being built at the University of Chicago Medical Center. The workshop made several recommendations and led to the development of a full proposal to the Alfred P. Sloan Foundation as well as to the creation of the Hospital Microbiome Consortium. PMID:23961316

Workshop on Agricultural Air Quality: State of the science

NASA Astrophysics Data System (ADS)

Aneja, Viney P.; Blunden, Jessica; Roelle, Paul A.; Schlesinger, William H.; Knighton, Raymond; Niyogi, Dev; Gilliam, Wendell; Jennings, Greg; Duke, Clifford S.

The first Workshop on Agricultural Air Quality: State of the Science was held at the Bolger Center in Potomac, Maryland from 4 to 8 June 2006. This international conference assembled approximately 350 people representing 25 nations from 5 continents, with disciplines ranging from atmospheric chemistry to soil science. The workshop was designed as an open forum in which participants could openly exchange the most current knowledge and learn about numerous international perspectives regarding agricultural air quality. Participants represented many stakeholder groups concerned with the growing need to assess agricultural impacts on the atmosphere and to develop beneficial policies to improve air quality. The workshop focused on identifying methods to improve emissions inventories and best management practices for agriculture. Workshop participants also made recommendations for technological and methodological improvements in current emissions measurement and modeling practices. The workshop commenced with a session on agricultural emissions and was followed by international perspectives from the United States, Europe, Australia, India, and South America. This paper summarizes the findings and issues of the workshop and articulates future research needs. These needs were identified in three general areas: (1) improvement of emissions measurement; (2) development of appropriate emission factors; and (3) implementation of best management practices (BMPs) to minimize negative environmental impacts. Improvements in the appropriate measurements will inform decisions regarding US farming practices. A need was demonstrated for a national/international network to monitor atmospheric emissions from agriculture and their subsequent depositions to surrounding areas. Information collected through such a program may be used to assess model performance and could be critical for evaluating any future regulatory policies or BMPs. The workshop concluded that efforts to maximize benefits and reduce detrimental effects of agricultural production need to transcend disciplinary, geographic, and political boundaries. Also, such efforts should involve natural and social scientists, economists, engineers, business leaders, and decision makers. The workshop came to the conclusion that through these collaborative efforts improvements in air quality from agricultural practices will begin to take effect.

A multi-method evaluation of interprofessional education for healthcare professionals caring for women during and after pregnancy.

PubMed

Olander, Ellinor; Coates, Rose; Brook, Judy; Ayers, Susan; Salmon, Debra

2018-02-09

This multi-method evaluation assessed the perceived impact of interprofessional workshops targeting enhanced collaboration between healthcare professionals who care for women during and after pregnancy. Current policy recommends partnership working to improve care for women and babies, however, there is little interprofessional education in this area. Five one-day workshops were delivered to 18 healthcare professionals (47.4% of the 38 healthcare professionals registered). The workshop was evaluated through questionnaires before and after the workshop measuring attitudes and willingness towards collaboration; observations of the workshops by a researcher and follow-up interviews 2 months' post-workshop to explore changes in practice. Workshops were attended by midwives, health visitors (trained nurses specialising in community care for children 0-5 years), dietitians, nurses, a general practitioner and a breastfeeding specialist. Attitudes and willingness to participate in interprofessional collaborative practice improved after the workshop. Observations made at the workshop included engaged participants who reported numerous barriers towards collaboration. Follow-up contact with 12 participants identified several examples of collaboration in practice resulting from workshop attendance. These findings suggest that the workshops influenced attendees to change their practice towards more collaborative working. Future work needs to confirm these results with more participants.

Future directions for H sub x O sub y detection

NASA Technical Reports Server (NTRS)

Crosley, David R. (Editor); Hoell, James M. (Editor)

1986-01-01

The activities and recommendations of the NASA workshop on the Future Directions for H sub x O sub y detection are given. The objective of this workshop was to access future directions for the measurement of the OH radical as well as other H sub x O sub y species. The workshop discussions were focused by two broad questions: (1) What are the capabilities of potential measurement methods? and (2) Will the results from the most promising method be useful in furthering understanding of tropospheric chemistry?

Comparison of Laboratory Measured BCFs, BMFs, and BSAFs to Field Measured BAFs, BMFs, and BSAFs

EPA Science Inventory

A series of workshops on bioaccumulation science and issues have been held since 2005, and the foci of these past workshops were1) Bioaccumulation Data Sources, 2) In Vitro/ADME (absorption, distribution, metabolism, and excretion) in Bioaccumulation Assessments, and 3) Bioaccumu...

A Gestalt Marathon Workshop: Effects on Extraversion and Neuroticism

ERIC Educational Resources Information Center

Foulds, Melvin L.; Hannigan, Patricia S.

1976-01-01

College students (N=18) participated in a 24-hour marathon gestalt workshop and responded to the Eysenck Personality Inventory before and after the event. Results revealed a significant positive change at the .01 level on a measure of neuroticism-stability and no change on a measure of extroversion-introversion. (Author)

Proceedings of the Federal Interagency Sediment Monitoring Instrument and Analysis Research Workshop, September 9-11, 2003, Flagstaff, Arizona

USGS Publications Warehouse

Gray, John R.

2005-01-01

The Advisory Committee on Water Information's Subcommittee on Sedimentation sponsored the Federal Interagency Sediment Monitoring Instrument and Analysis Research Workshop on September 9-11, 2003, at the U.S. Geological Survey Flagstaff Field Center, Arizona. The workshop brought together a diverse group representing most Federal agencies whose mission includes fluvial-sediment issues; academia; the private sector; and others with interests and expertise in fluvial-sediment monitoring ? suspended sediment, bedload, bed material, and bed topography ? and associated data-analysis techniques. The workshop emphasized technological and theoretical advances related to measurements of suspended sediment, bedload, bed material and bed topography, and data analyses. This workshop followed and expanded upon part of the 2002 Federal Interagency Workshop on Turbidity and Other Sediment Surrogates (http://water.usgs.gov/pubs/circ/2003/circ1250/), which initiated a process to provide national standards for measurement and use of turbidity and other sediment-surrogate data. This report provides a description of the salient attributes of the workshop and related information, major deliberations and findings, and principal recommendations. This information is available for evaluation by the Subcommittee on Sedimentation, which may opt to develop an action plan based on the recommendations that it endorses for consideration by the Advisory Committee on Water Information.

CFL3D, FUN3d, and NSU3D Contributions to the Fifth Drag Prediction Workshop

NASA Technical Reports Server (NTRS)

Park, Michael A.; Laflin, Kelly R.; Chaffin, Mark S.; Powell, Nicholas; Levy, David W.

2013-01-01

Results presented at the Fifth Drag Prediction Workshop using CFL3D, FUN3D, and NSU3D are described. These are calculations on the workshop provided grids and drag adapted grids. The NSU3D results have been updated to reflect an improvement to skin friction calculation on skewed grids. FUN3D results generated after the workshop are included for custom participant generated grids and a grid from a previous workshop. Uniform grid refinement at the design condition shows a tight grouping in calculated drag, where the variation in the pressure component of drag is larger than the skin friction component. At this design condition, A fine-grid drag value was predicted with a smaller drag adjoint adapted grid via tetrahedral adaption to a metric and mixed-element subdivision. The buffet study produced larger variation than the design case, which is attributed to large differences in the predicted side-of-body separation extent. Various modeling and discretization approaches had a strong impact on predicted side-of-body separation. This large wing root separation bubble was not observed in wind tunnel tests indicating that more work is necessary in modeling wing root juncture flows to predict experiments.

Literature-Based Workshops for Mathematics: Ideas for Active Learning Grades K-2.

ERIC Educational Resources Information Center

Morrison, Kathy; Dittrich, Tina; Claridge, Jill

This book presents ways to use high quality children's literature to plan small group workshops in mathematics for K-2 instruction. Each of the six sets of workshops is built around storybooks children love and focuses on a specific aspect of numeracy: shapes, counting, seriation, addition, money, and measurement. Each set is designed for a…

Emotional intelligence and coping styles: An intervention in geriatric nurses.

PubMed

Sarabia-Cobo, Carmen María; Suárez, Soraya González; Menéndez Crispín, Ernesto J; Sarabia Cobo, A Belén; Pérez, Victoria; de Lorena, Pablo; Rodríguez Rodríguez, Cristina; Sanlúcar Gross, Laura

2017-06-01

Current research indicates a relationship between EI, stress, coping strategies, well-being and mental health. Emotional intelligence skills and knowledge, and coping strategies can be increased with training. The aims of this study were to use a controlled design to test the impact of theoretically based training on the different components of EI and coping styles in a sample of nurses working with older adults. A group of 92 professionals (RN and CAN) who attended a workshop on EI were included in the study. They completed a self-reported measure of EI and coping styles on three occasions: pre- and post-workshop and at one year follow-up. The EI workshop consisted of four 4-h sessions conducted over a four-week period. Each session was held at the one-week interval. This interval allowed participants to apply what was taught during the session to their daily life. The instruments to measure the EI and coping were the Trait Meta-Mood Scale and the CAE test. There were significant differences between the pre- and post-workshop measures both at the end of the workshop and up to one year for both the Trait Meta-Mood Scale scores and the CAE test. There was a significant increase in the EI and coping styles after the workshop and one year thereafter. The workshop was useful for developing EI in the professionals. The immediate impact of the emotional consciousness of individuals was particularly significant for all participants. The long-term impact was notable for the significant increase in EI and most coping styles. Copyright © 2017 Elsevier Inc. All rights reserved.

Towards low flow risk maps

NASA Astrophysics Data System (ADS)

Blauhut, Veit; Stölzle, Michael; Stahl, Kerstin

2017-04-01

Drought induced low flow extremes, despite a variety of management strategies, can cause direct and indirect impacts on socio economic and ecological functions of rivers. These negative effects determine local risk and are a function of the regional drought hazard and the river system's vulnerability. Whereas drought risk analysis is known to be essential for drought management, risk analysis for low flow is less common. Where no distributed hydrological models exist, merely the local hazard at gauging stations is available to represent the entire catchment. Vulnerability information are only sparsely available. Hence, a comprehensive understanding of the drivers of low flow risk along the longitudinal river profile is often lacking. For two different rivers in southwestern Germany, this study analysed major low flow events of the past five decades. Applying a transdisciplinary approach, the hazard component is assessed by hydro-climatic analysis, hydrological modelling and forward looking stress test scenarios; the vulnerability component is estimated by a combination of impact assessment and vulnerability estimation, based on stakeholder workshops, questionnaires and regional characteristics. The results show distinct differences in low flow risk between the catchments and along the river. These differences are due to: hydrogeological characteristics that govern groundwater-surface water interaction, catchment-specific anthropogenic stimuli such as low flow decrease by near-stream groundwater pumping for public water supply or low flow augmentation by treatment plant discharge. Thus, low flow risk is anthropogenically influenced in both ways: positive and negative. Furthermore, the measured longitudinal profiles highlight the impracticability of single gauges to represent quantitative and qualitative conditions of entire rivers. Hence, this work calls for a comprehensive spatially variable consideration of flow characteristics and human influences to analyse low flow risk as the basis for an adequate low flow management.

The Effects of the SUN Project on Teacher Knowledge and Self-Efficacy Regarding Biological Energy Transfer Are Significant and Long-Lasting: Results of a Randomized Controlled Trial

PubMed Central

Batiza, Ann Finney; Gruhl, Mary; Zhang, Bo; Harrington, Tom; Roberts, Marisa; LaFlamme, Donna; Haasch, Mary Anne; Knopp, Jonathan; Vogt, Gina; Goodsell, David; Hagedorn, Eric; Marcey, David; Hoelzer, Mark; Nelson, Dave

2013-01-01

Biological energy flow has been notoriously difficult to teach. Our approach to this topic relies on abiotic and biotic examples of the energy released by moving electrons in thermodynamically spontaneous reactions. A series of analogical model-building experiences was supported with common language and representations including manipulatives. These materials were designed to help learners understand why electrons move in a hydrogen explosion and hydrogen fuel cell, so they could ultimately understand the rationale for energy transfer in the mitochondrion and the chloroplast. High school biology teachers attended a 2-wk Students Understanding eNergy (SUN) workshop during a randomized controlled trial. These treatment group teachers then took hydrogen fuel cells, manipulatives, and other materials into their regular biology classrooms. In this paper, we report significant gains in teacher knowledge and self-efficacy regarding biological energy transfer in the treatment group versus randomized controls. Significant effects on treatment group teacher knowledge and self-efficacy were found not only post–SUN workshop but even 1 yr later. Teacher knowledge was measured with both a multiple-choice exam and a drawing with a written explanation. Teacher confidence in their ability to teach biological energy transfer was measured by a modified form of the Science Teaching Efficacy Belief Instrument, In-Service A. Professional development implications regarding this topic are discussed. PMID:23737635

The effects of the SUN project on teacher knowledge and self-efficacy regarding biological energy transfer are significant and long-lasting: results of a randomized controlled trial.

PubMed

Batiza, Ann Finney; Gruhl, Mary; Zhang, Bo; Harrington, Tom; Roberts, Marisa; LaFlamme, Donna; Haasch, Mary Anne; Knopp, Jonathan; Vogt, Gina; Goodsell, David; Hagedorn, Eric; Marcey, David; Hoelzer, Mark; Nelson, Dave

2013-06-01

Biological energy flow has been notoriously difficult to teach. Our approach to this topic relies on abiotic and biotic examples of the energy released by moving electrons in thermodynamically spontaneous reactions. A series of analogical model-building experiences was supported with common language and representations including manipulatives. These materials were designed to help learners understand why electrons move in a hydrogen explosion and hydrogen fuel cell, so they could ultimately understand the rationale for energy transfer in the mitochondrion and the chloroplast. High school biology teachers attended a 2-wk Students Understanding eNergy (SUN) workshop during a randomized controlled trial. These treatment group teachers then took hydrogen fuel cells, manipulatives, and other materials into their regular biology classrooms. In this paper, we report significant gains in teacher knowledge and self-efficacy regarding biological energy transfer in the treatment group versus randomized controls. Significant effects on treatment group teacher knowledge and self-efficacy were found not only post-SUN workshop but even 1 yr later. Teacher knowledge was measured with both a multiple-choice exam and a drawing with a written explanation. Teacher confidence in their ability to teach biological energy transfer was measured by a modified form of the Science Teaching Efficacy Belief Instrument, In-Service A. Professional development implications regarding this topic are discussed.

Satellite Instrument Calibration for Measuring Global Climate Change. Report of a Workshop at the University of Maryland Inn and Conference Center, College Park, MD. , November 12-14, 2002

NASA Technical Reports Server (NTRS)

Ohring, G.; Wielicki, B.; Spencer, R.; Emery, B.; Datla, R.

2004-01-01

Measuring the small changes associated with long-term global climate change from space is a daunting task. To address these problems and recommend directions for improvements in satellite instrument calibration some 75 scientists, including researchers who develop and analyze long-term data sets from satellites, experts in the field of satellite instrument calibration, and physicists working on state of the art calibration sources and standards met November 12 - 14, 2002 and discussed the issues. The workshop defined the absolute accuracies and long-term stabilities of global climate data sets that are needed to detect expected trends, translated these data set accuracies and stabilities to required satellite instrument accuracies and stabilities, and evaluated the ability of current observing systems to meet these requirements. The workshop's recommendations include a set of basic axioms or overarching principles that must guide high quality climate observations in general, and a roadmap for improving satellite instrument characterization, calibration, inter-calibration, and associated activities to meet the challenge of measuring global climate change. It is also recommended that a follow-up workshop be conducted to discuss implementation of the roadmap developed at this workshop.

Reynolds-Averaged Navier-Stokes Analysis of Zero Efflux Flow Control over a Hump Model

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.

2006-01-01

The unsteady flow over a hump model with zero efflux oscillatory flow control is modeled computationally using the unsteady Reynolds-averaged Navier-Stokes equations. Three different turbulence models produce similar results, and do a reasonably good job predicting the general character of the unsteady surface pressure coefficients during the forced cycle. However, the turbulent shear stresses are underpredicted in magnitude inside the separation bubble, and the computed results predict too large a (mean) separation bubble compared with experiment. These missed predictions are consistent with earlier steady-state results using no-flow-control and steady suction, from a 2004 CFD validation workshop for synthetic jets.

Reynolds-Averaged Navier-Stokes Analysis of Zero Efflux Flow Control Over a Hump Model

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.

2006-01-01

The unsteady flow over a hump model with zero efflux oscillatory flow control is modeled computationally using the unsteady Reynolds-averaged Navier-Stokes equations. Three different turbulence models produce similar results, and do a reasonably good job predicting the general character of the unsteady surface pressure coefficients during the forced cycle. However, the turbulent shear stresses are underpredicted in magnitude inside the separation bubble, and the computed results predict too large a (mean) separation bubble compared with experiment. These missed predictions are consistent with earlier steady-state results using no-flow-control and steady suction, from a 2004 CFD validation workshop for synthetic jets.

Workshop on Workload and Training, and Examination of their Interactions: Executive summary

NASA Technical Reports Server (NTRS)

Donchin, Emanuel; Hart, Sandra G.; Hartzell, Earl J.

1987-01-01

The goal of the workshop was to bring together experts in the fields of workload and training and representatives from the Dept. of Defense and industrial organizations who are reponsible for specifying, building, and managing advanced, complex systems. The challenging environments and requirements imposed by military helicopter missions and space station operations were presented as the focus for the panel discussions. The workshop permitted a detailed examination of the theoretical foundations of the fields of training and workload, as well as their practical applications. Furthermore, it created a forum where government, industry, and academic experts were able to examine each other's concepts, values, and goals. The discussions pointed out the necessity for a more efficient and effective flow of information among the groups respresented. The executive summary describes the rationale of the meeting, summarizes the primary points of discussion, and lists the participants and some of their summary comments.

The Hurricane-Flood-Landslide Continuum

NASA Technical Reports Server (NTRS)

Negri, Andrew J.; Burkardt, Nina; Golden, Joseph H.; Halverson, Jeffrey B.; Huffman, George J.; Larsen, Matthew C.; McGinley, John A.; Updike, Randall G.; Verdin, James P.; Wieczorek, Gerald F.

2005-01-01

In August 2004, representatives from NOAA, NASA, the USGS, and other government agencies convened in San Juan, Puerto Rim for a workshop to discuss a proposed research project called the Hurricane-Flood-Landslide Continuum (HFLC). The essence of the HFLC is to develop and integrate tools across disciplines to enable the issuance of regional guidance products for floods and landslides associated with major tropical rain systems, with sufficient lead time that local emergency managers can protect vulnerable populations and infrastructure. All three lead agencies are independently developing precipitation-flood-debris flow forecasting technologies, and all have a history of work on natural hazards both domestically and overseas. NOM has the capability to provide tracking and prediction of storm rainfall, trajectory and landfall and is developing flood probability and magnTtude capabilities. The USGS has the capability to evaluate the ambient stability of natural and man-made landforms, to assess landslide susceptibilities for those landforms, and to establish probabilities for initiation of landslides and debris flows. Additionally, the USGS has well-developed operational capacity for real-time monitoring and reporting of streamflow across distributed networks of automated gaging stations (http://water.usgs.gov/waterwatch/). NASA has the capability to provide sophisticated algorithms for satellite remote sensing of precipitation, land use, and in the future, soil moisture. The Workshop sought to initiate discussion among three agencies regarding their specific and highly complimentary capabilities. The fundamental goal of the Workshop was to establish a framework that will leverage the strengths of each agency. Once a prototype system is developed for example, in relatively data-rich Puerto Rim, it could be adapted for use in data-poor, low-infrastructure regions such as the Dominican Republic or Haiti. This paper provides an overview of the Workshop s goals, presentations and recommendations with respect to the development of the HFLC.

Students and Scientists Connect with Nature in Uganda, East Africa

ERIC Educational Resources Information Center

Johnson-Pynn, Julie S.; Johnson, Laura R.; Kityo, Robert; Lugumya, Douglas

2014-01-01

We studied the impact of environmental education (EE) workshops on Ugandan youth's (N = 84) perceptions of their relationship with nature, self efficacy, and civic attitudes and skills. Two nature-related measures and two measures related to social competencies were administered before and after EE workshops that were designed to educate youth…

*Evaluating the toxicity of airborne particulate matter and nanoparticles by measuring oxidative strett potential - A workshop report and consensus statement

EPA Science Inventory

BACKGROUND: There is a strong need for laboratory in vitro test systems for the toxicity of airborne particulate matter and nanoparticles. The measurement of oxidative stress potential offers a promising way forward. OBJECTIVES: A workshop was convened involving leading workers f...

Pollinator Risk Assessment: an International Workshop

EPA Pesticide Factsheets

This 2011 Society of Environmental Toxicology and Chemistry (SETAC) workshop brought together statisticians, bee biologists, modelers, beekeepers, risk assessors and risk managers to develop exposure measurement methods and identify pesticide effects.

US-Japan workshops in medical mycology: past, present and future.

PubMed

Dixon, D M

2001-01-01

The Extramural Mycology Program of the National Institutes of Health (NIH), National Institute of Allergy and Infectious Diseases (NIAID) has organized and implemented a five workshop series in medical mycology during a critical period in the evolution of contemporary medical mycology (1992 to 2000; http://www.niaid.nih.gov/research/dmid.htm). The goals of the workshop series were to: initiate interactions; build collaborations; identify research needs; turn needs into opportunities; stimulate molecular research in medical mycology; and summarize recommendations emerging from the workshop proceedings. A recurring recommendation in the series was to foster communications within and beyond the field of medical mycology. US-Japan interactions were noted as one specific example of potential information exchange for mutual benefit. The first formal action directed at this recommendation was the workshop Emergence and Recognition of Fungal Diseases convened under the auspices of the US-Japan Cooperative Medical Science Program (USJCMSP; http://www.niaid. nih.gov/dmid/us%5Fjapan/default.htm) in Bethesda, Maryland USA on 30 June 1999 (D.M. Dixon & T. Matsumoto, co-chairs). A major goal of the workshop was to present contemporary medical mycology to the Joint Committee of the USJCMSP through representative research presentations in order to make the Committee aware of current status in the field, and the potential for scientific interactions. The second formal action is the workshop, under the auspices of the Japanese Society for Medical Mycology Medical Perspectives of Fungal Genome Studies scheduled for 28 November 2000 in Tokyo, Japan (T. Matsumoto & D.M. Dixon, co-chairs). The NIAID Mycology Workshop series recommended interactions between the following groups: academic and pharmaceutical; medical and molecular (model systems); medical and plant pathogens; basic and clinical; mycologists and immunologists. The first two US-Japan workshops can be viewed as consistent with these recommendations, and serve as a Western/Eastern gateway for exchange. The focus of the second US-Japan workshop on genome projects for the medically important fungi provides an excellent model for international communications. Given the tsunami of information that is flowing from genomics and bioinformatics, it is clear that global interactions will be essential in managing and interpreting the data.

NASA CYGNSS Mission Applications Workshop

NASA Technical Reports Server (NTRS)

Amin, Aimee V. (Compiler); Murray, John J. (Editor); Stough, Timothy M. (Editor); Molthan, Andrew (Editor)

2015-01-01

NASA's Cyclone Global Navigation Satellite System, (CYGNSS), mission is a constellation of eight microsatellites that will measure surface winds in and near the inner cores of hurricanes, including regions beneath the eyewall and intense inner rainbands that could not previously be measured from space. The CYGNSS-measured wind fields, when combined with precipitation fields (e.g., produced by the Global Precipitation Measurement [GPM] core satellite and its constellation of precipitation imagers), will provide coupled observations of moist atmospheric thermodynamics and ocean surface response, enabling new insights into hurricane inner core dynamics and energetics. The outcomes of this workshop, which are detailed in this report, comprise two primary elements: (1) A report of workshop proceedings, and; (2) Detailed Applications Traceability Matrices with requirements and operational considerations to serve broadly for development of value-added tools, applications, and products.

Lessons Learned in the Selection and Development of Test Cases for the Aeroelastic Prediction Workshop: Rectangular Supercritical Wing

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Chwalowski, Pawel; Wieseman, Carol D.; Florance, Jennifer P.; Schuster, David M.

2013-01-01

The Aeroelastic Prediction Workshop brought together an international community of computational fluid dynamicists as a step in defining the state of the art in computational aeroelasticity. The Rectangular Supercritical Wing (RSW) was chosen as the first configuration to study due to its geometric simplicity, perceived simple flow field at transonic conditions and availability of an experimental data set containing forced oscillation response data. Six teams performed analyses of the RSW; they used Reynolds-Averaged Navier-Stokes flow solvers exercised assuming that the wing had a rigid structure. Both steady-state and forced oscillation computations were performed by each team. The results of these calculations were compared with each other and with the experimental data. The steady-state results from the computations capture many of the flow features of a classical supercritical airfoil pressure distribution. The most dominant feature of the oscillatory results is the upper surface shock dynamics. Substantial variations were observed among the computational solutions as well as differences relative to the experimental data. Contributing issues to these differences include substantial wind tunnel wall effects and diverse choices in the analysis parameters.

Bridge Workshop : Enhancing Bridge Performance, February 21-22, 2008, Reston, Virginia : workshop report

Treesearch

Sreenivas Alampalli; Sheila Rimal Duwadi; Reagan Sentelle Herman; Danielle D. Kleinhans; Khaled Mahmoud; James C. Ray; James P. Wacker; Nur Yazdani

2008-01-01

The participants to the workshop were given the charge to discuss (1) bridge design issues including best practices in design and detailing that could be used to improve durability, extend service life and prevent premature deterioration, (2) performance measures needed to better determine bridge condition, (3) technologies that could be used to monitor bridge life and...

The atmospheric effects of stratospheric aircraft. Report of the 1992 Models and Measurements Workshop. Volume 1: Workshop objectives and summary

NASA Technical Reports Server (NTRS)

Prather, Michael J. (Editor); Remsburg, Ellis E. (Editor)

1993-01-01

This Workshop on Stratospheric Models and Measurements (M&M) marks a significant expansion in the history of model intercomparisons. It provides a foundation for establishing the credibility of stratospheric models used in environmental assessments of chlorofluorocarbons, aircraft emissions, and climate-chemistry interactions. The core of the M&M comparisons involves the selection of observations of the current stratosphere (i.e., within the last 15 years): these data are believed to be accurate and representative of certain aspects of stratospheric chemistry and dynamics that the models should be able to simulate.

Using equitable impact sensitive tool (EQUIST) and knowledge translation to promote evidence to policy link in maternal and child health: report of first EQUIST training workshop in Nigeria.

PubMed

Uneke, Chigozie Jesse; Sombie, Issiaka; Uro-Chukwu, Henry Chukwuemeka; Johnson, Ermel; Okonofua, Friday

2017-01-01

The Equitable Impact Sensitive Tool (EQUIST) designed by UNICEF and knowledge translation (KT) are important strategies that can help policymakers to improve equity and evidence-informed policy making in maternal, newborn and child health (MNCH). The purpose of this study was to improve the knowledge and capacity of an MNCH implementation research team (IRT) and policy makers to use EQUIST and KT. A modified "before and after" intervention study design was used in which outcomes were measured on the target participants both before the intervention (workshop) is implemented and after. A 5-point likert scale according to the degree of adequacy was employed. A three -day intensive EQUIST and KT training workshop was organized in Edo State, Nigeria with 45 participants in attendance. Some of the topics covered included: (i) Knowledge translation models, measures & tools; (ii) Policy review, analysis and contextualization; (iii) Policy formulation and legislation process; (iv) EQUIST Overview & Theory of change; (v) EQUIST's situation analysis, scenario analysis and scenario comparison. The pre-workshop mean of understanding of use of KT ranged from 2.02-3.41, while the post-workshop mean ranged from 3.24-4.30. Pre-workshop mean of understanding of use of EQUIST ranged from 1.66-2.41, while the post-workshop mean ranged from 3.56-4.54 on the 5point scale. The percentage increase in mean of KT and EQUIST at the end of the workshop ranged from 8.0%-88.1% and 65.6%-158.4% respectively. Findings of this study suggest that policymakers' and researchers KT and EQUSIT use competence relevant to evidence-informed policymaking can be enhanced through training workshop.

Using equitable impact sensitive tool (EQUIST) and knowledge translation to promote evidence to policy link in maternal and child health: report of first EQUIST training workshop in Nigeria

PubMed Central

Uneke, Chigozie Jesse; Sombie, Issiaka; Uro-Chukwu, Henry Chukwuemeka; Johnson, Ermel; Okonofua, Friday

2017-01-01

The Equitable Impact Sensitive Tool (EQUIST) designed by UNICEF and knowledge translation (KT) are important strategies that can help policymakers to improve equity and evidence-informed policy making in maternal, newborn and child health (MNCH). The purpose of this study was to improve the knowledge and capacity of an MNCH implementation research team (IRT) and policy makers to use EQUIST and KT. A modified “before and after” intervention study design was used in which outcomes were measured on the target participants both before the intervention (workshop) is implemented and after. A 5-point likert scale according to the degree of adequacy was employed. A three -day intensive EQUIST and KT training workshop was organized in Edo State, Nigeria with 45 participants in attendance. Some of the topics covered included: (i) Knowledge translation models, measures & tools; (ii) Policy review, analysis and contextualization; (iii) Policy formulation and legislation process; (iv) EQUIST Overview & Theory of change; (v) EQUIST's situation analysis, scenario analysis and scenario comparison. The pre-workshop mean of understanding of use of KT ranged from 2.02-3.41, while the post-workshop mean ranged from 3.24-4.30. Pre-workshop mean of understanding of use of EQUIST ranged from 1.66-2.41, while the post-workshop mean ranged from 3.56-4.54 on the 5point scale. The percentage increase in mean of KT and EQUIST at the end of the workshop ranged from 8.0%-88.1% and 65.6%-158.4% respectively. Findings of this study suggest that policymakers' and researchers KT and EQUSIT use competence relevant to evidence-informed policymaking can be enhanced through training workshop. PMID:29158860

Summary of Data from the Sixth AIAA CFD Drag Prediction Workshop: CRM Cases 2 to 5

NASA Technical Reports Server (NTRS)

Tinoco, Edward N.; Brodersen, Olaf P.; Keye, Stefan; Laflin, Kelly R.; Feltrop, Edward; Vassberg, John C.; Mani, Mori; Rider, Ben; Wahls, Richard A.; Morrison, Joseph H.;

Sources of Differences in On-Orbit Total Solar Irradiance Measurements and Description of Proposed Laboratory Intercomparison

NASA Technical Reports Server (NTRS)

Butler, J.J.; Johnson, B. C.; Rice, J. P.; Shirley, E. L.; Barnes, R.A.

2008-01-01

There is a 5 W/sq m (about 0.35 %) difference between current on-orbit Total Solar Irradiance (TSI) measurements. On 18-20 July 2005, a workshop was held at the National Institute of Standards and Technology (NIST) in Gaithersburg, Maryland that focused on understanding possible reasons for this difference, through an examination of the instrument designs, calibration approaches, and appropriate measurement equations. The instruments studied in that workshop included the Active Cavity Radiometer Irradiance Monitor III (ACRIM III) on the Active Cavity Radiometer Irradiance Monitor SATellite (ACRIMSAT), the Total Irradiance Monitor (TIM) on the Solar Radiation and Climate Experiment (SORCE), the Variability of solar IRradiance and Gravity Oscillations (VIRGO) on the Solar and Heliospheric Observatory (SOHO), and the Earth Radiation Budget Experiment (ERBE) on the Earth Radiation Budget Satellite (ERBS). Presentations for each instrument included descriptions of its design, its measurement equation and uncertainty budget, and the methods used to assess on-orbit degradation. The workshop also included a session on satellite- and ground-based instrument comparisons and a session on laboratory-based comparisons and the application of new laboratory comparison techniques. The workshop has led to investigations of the effects of diffraction and of aperture area measurements on the differences between instruments. In addition, a laboratory-based instrument comparison is proposed that uses optical power measurements (with lasers that underEll the apertures of the TSI instruments), irradiance measurements (with lasers that overfill the apertures of the TSI instrument), and a cryogenic electrical substitution radiometer as a standard for comparing the instruments. A summary of the workshop and an overview of the proposed research efforts are presented here.

Sources of Differences in On-Orbital Total Solar Irradiance Measurements and Description of a Proposed Laboratory Intercomparison

PubMed Central

Butler, J. J; Johnson, B. C; Rice, J. P; Shirley, E. L; Barnes, R. A

2008-01-01

There is a 5 W/m2 (about 0.35 %) difference between current on-orbit Total Solar Irradiance (TSI) measurements. On 18–20 July 2005, a workshop was held at the National Institute of Standards and Technology (NIST) in Gaithersburg, Maryland that focused on understanding possible reasons for this difference, through an examination of the instrument designs, calibration approaches, and appropriate measurement equations. The instruments studied in that workshop included the Active Cavity Radiometer Irradiance Monitor III (ACRIM III) on the Active Cavity Radiometer Irradiance Monitor SATellite (ACRIMSAT), the Total Irradiance Monitor (TIM) on the Solar Radiation and Climate Experiment (SORCE), the Variability of solar IRradiance and Gravity Oscillations (VIRGO) on the Solar and Heliospheric Observatory (SOHO), and the Earth Radiation Budget Experiment (ERBE) on the Earth Radiation Budget Satellite (ERBS). Presentations for each instrument included descriptions of its design, its measurement equation and uncertainty budget, and the methods used to assess on-orbit degradation. The workshop also included a session on satellite- and ground-based instrument comparisons and a session on laboratory-based comparisons and the application of new laboratory comparison techniques. The workshop has led to investigations of the effects of diffraction and of aperture area measurements on the differences between instruments. In addition, a laboratory-based instrument comparison is proposed that uses optical power measurements (with lasers that underfill the apertures of the TSI instruments), irradiance measurements (with lasers that overfill the apertures of the TSI instrument), and a cryogenic electrical substitution radiometer as a standard for comparing the instruments. A summary of the workshop and an overview of the proposed research efforts are presented here. PMID:27096120

Adaptation and Implementation of an Intervention to Reduce HIV-Related Stigma Among Healthcare Workers in the United States: Piloting of the FRESH Workshop.

PubMed

Batey, D Scott; Whitfield, Samantha; Mulla, Mazheruddin; Stringer, Kristi L; Durojaiye, Modupeoluwa; McCormick, Lisa; Turan, Bulent; Nyblade, Laura; Kempf, Mirjam-Colette; Turan, Janet M

2016-11-01

HIV-related stigma has been shown to have profound effects on people living with HIV (PLWH). When stigma is experienced in a healthcare setting, negative health outcomes are exacerbated. We sought to assess the feasibility and acceptability of a healthcare setting stigma-reduction intervention, the Finding Respect and Ending Stigma around HIV (FRESH) Workshop, in the United States. This intervention, adapted from a similar strategy implemented in Africa, brought together healthcare workers (HW) and PLWH to address HIV-related stigma. Two pilot workshops were conducted in Alabama and included 17 HW and 19 PLWH. Participants completed questionnaire measures pre- and post-workshop, including open-ended feedback items. Analytical methods included assessment of measures reliability, pre-post-test comparisons using paired t-tests, and qualitative content analysis. Overall satisfaction with the workshop experience was high, with 87% PLWH and 89% HW rating the workshop "excellent" and the majority agreeing that others like themselves would be interested in participating. Content analysis of open-ended items revealed that participants considered the workshop informative, interactive, well-organized, understandable, fun, and inclusive, while addressing real and prevalent issues. Most pre- and post-test measures had good-excellent internal consistency reliability (Cronbach's alphas ranging from 0.70 to 0.96) and, although sample sizes were small, positive trends were observed, reaching statistical significance for increased awareness of stigma in the health facility among HW (p = 0.047) and decreased uncertainty about HIV treatment among PLWH (p = 0.017). The FRESH intervention appears to be feasible and highly acceptable to HW and PLWH participants and shows great promise as a healthcare setting stigma-reduction intervention for US contexts.

Adaptation and Implementation of an Intervention to Reduce HIV-Related Stigma Among Healthcare Workers in the United States: Piloting of the FRESH Workshop

PubMed Central

Whitfield, Samantha; Mulla, Mazheruddin; Stringer, Kristi L.; Durojaiye, Modupeoluwa; McCormick, Lisa; Turan, Bulent; Nyblade, Laura; Kempf, Mirjam-Colette; Turan, Janet M.

2016-01-01

Abstract HIV-related stigma has been shown to have profound effects on people living with HIV (PLWH). When stigma is experienced in a healthcare setting, negative health outcomes are exacerbated. We sought to assess the feasibility and acceptability of a healthcare setting stigma-reduction intervention, the Finding Respect and Ending Stigma around HIV (FRESH) Workshop, in the United States. This intervention, adapted from a similar strategy implemented in Africa, brought together healthcare workers (HW) and PLWH to address HIV-related stigma. Two pilot workshops were conducted in Alabama and included 17 HW and 19 PLWH. Participants completed questionnaire measures pre- and post-workshop, including open-ended feedback items. Analytical methods included assessment of measures reliability, pre–post-test comparisons using paired t-tests, and qualitative content analysis. Overall satisfaction with the workshop experience was high, with 87% PLWH and 89% HW rating the workshop “excellent” and the majority agreeing that others like themselves would be interested in participating. Content analysis of open-ended items revealed that participants considered the workshop informative, interactive, well-organized, understandable, fun, and inclusive, while addressing real and prevalent issues. Most pre- and post-test measures had good–excellent internal consistency reliability (Cronbach's alphas ranging from 0.70 to 0.96) and, although sample sizes were small, positive trends were observed, reaching statistical significance for increased awareness of stigma in the health facility among HW (p = 0.047) and decreased uncertainty about HIV treatment among PLWH (p = 0.017). The FRESH intervention appears to be feasible and highly acceptable to HW and PLWH participants and shows great promise as a healthcare setting stigma-reduction intervention for US contexts. PMID:27849373

Intelligent Devices - Sensors and Actuators - A KSC Perspective

NASA Technical Reports Server (NTRS)

Mata, Carlos T.; Perotti, Jose M.

2008-01-01

The primary objective of this workshop is to identify areas of advancement in sensor measurements and technologies that will help to define standard practices and procedures that will better enable the infusion into flight programs of sensors with improved capabilities but limited or no flight heritage. These standards would be crucial to demonstrating a methodology for validating current models while also creating the possibility of being able to have sufficient data to either update these models (e. g., spatial or temporal resolution, etc.) or develop new models based on the ability to simulate the new measured physical parameters. The workshop is also intended to narrow the gap between sensor measurements (and techniques), data processing techniques and the ability to make use of that data by gathering together experts in the field for a short workshop. This collaboration will unite NASA and other government agencies with contractor capabilities industry-wide to prevent duplication, spawn synergistic growth in sensor technology, help analysts make good engineering decisions and help focus new sensor maturation efforts to better meet future flight program customers' needs. This is the first such workshop designed to specifically address establishing a standardized protocol/methodology for demonstrating the technology readiness of non-flight heritage sensor systems. While other similar workshops are held covering many areas of interest to the sensor development community, no other meeting is specific enough to address this vital but often overlooked topic. By encouraging cross-fertilization of ideas from instrument experts from many different backgrounds, it is hoped that this workshop will initiate innovative new ideas and concepts in sensor development, calibration and validation. It is anticipated this workshop will repeat periodically as needed.

Linking Biological Responses of Terrestrial N Eutrophication to the Final Ecosystem Goods and Services Classification System

NASA Astrophysics Data System (ADS)

Bell, M. D.; Clark, C.; Blett, T.

2015-12-01

The response of a biological indicator to N deposition can indicate that an ecosystem has surpassed a critical load and is at risk of significant change. The importance of this exceedance is often difficult to digest by policy makers and public audiences if the change is not linked to a familiar ecosystem endpoint. A workshop was held to bring together scientists, resource managers, and policy makers with expertise in ecosystem functioning, critical loads, and economics in an effort to identify the ecosystem services impacted by air pollution. This was completed within the framework of the Final Ecosystem Goods and Services (FEGS) Classification System to produce a product that identified distinct interactions between society and the effects of nitrogen pollution. From each change in a biological indicator, we created multiple ecological production functions to identify the cascading effects of the change to a measureable ecosystem service that a user interacts with either by enjoying, consuming, or appreciating the good or service, or using it as an input in the human economy. This FEGS metric was then linked to a beneficiary group that interacts with the service. Chains detailing the links from the biological indicator to the beneficiary group were created for aquatic and terrestrial acidification and eutrophication at the workshop, and here we present a subset of the workshop results by highlighting for 9 different ecosystems affected by terrestrial eutrophication. A total of 213 chains that linked to 37 unique FEGS metrics and impacted 15 beneficiary groups were identified based on nitrogen deposition mediated changes to biological indicators. The chains within each ecosystem were combined in flow charts to show the complex, overlapping relationships among biological indicators, ecosystem services, and beneficiary groups. Strength of relationship values were calculated for each chain based on support for the link in the scientific literature. We produced the complex diagrams to provide details to scientists and experts, identify research gaps, and understand the complexity of critical load exceedances. We then simplified the flow charts into stories that could produce an emotional connection and resonate with a general audience. These stories are important steps to breach the gaps between science and policy.

Immunologic monitoring of cancer vaccine therapy: results of a workshop sponsored by the Society for Biological Therapy.

PubMed

Keilholz, Ulrich; Weber, Jeffrey; Finke, James H; Gabrilovich, Dmitry I; Kast, W Martin; Disis, Mary L; Kirkwood, John M; Scheibenbogen, Carmen; Schlom, Jeff; Maino, Vernon C; Lyerly, H Kim; Lee, Peter P; Storkus, Walter; Marincola, Franceso; Worobec, Alexandra; Atkins, Michael B

2002-01-01

The Society for Biological Therapy held a Workshop last fall devoted to immune monitoring for cancer immunotherapy trials. Participants included members of the academic and pharmaceutical communities as well as the National Cancer Institute and the Food and Drug Administration. Discussion focused on the relative merits and appropriate use of various immune monitoring tools. Six breakout groups dealt with assays of T-cell function, serologic and proliferation assays to assess B cell and T helper cell activity, and enzyme-linked immunospot assay, tetramer, cytokine flow cytometry, and reverse transcription polymerase chain reaction assays of T-cell immunity. General conclusions included: (1) future vaccine studies should be designed to determine whether T-cell dysfunction (tumor-specific and nonspecific) correlated with clinical outcome; (2) tetramer-based assays yield quantitative but not functional data (3) enzyme-linked immunospot assays have the lowest limit of detection (4) cytokine flow cytometry have a higher limit of detection than enzyme-linked immunospot assay, but offer the advantages of speed and the ability to identify subsets of reactive cells; (5) antibody tests are simple and accurate and should be incorporated to a greater extent in monitoring plans; (6) proliferation assays are imprecise and should not be emphasized in future studies; (7) the reverse transcription polymerase chain reaction assay is a promising research approach that is not ready for widespread application; and (8)there is a critical need to validate these assays as surrogates for vaccine potency and clinical effect. Current data and opinion support the use of a functional assay like the enzyme-linked immunospot assay or cytokine flow cytometry in combination with a quantitative assay like tetramers for immune monitoring. At present, assays appear to be most useful as measures of vaccine potency. Careful immune monitoring in association with larger scale clinical trials ultimately may enable the correlation of monitoring results with clinical benefit.

Workshop II On Unsteady Separated Flow Proceedings

DTIC Science & Technology

1988-07-28

was static stall angle of 12 ° . achieved by injecting diluted food coloring at the apex through a 1.5 mm diameter tube placed The response of the wing...differences with uniform step size in q, and trailing -. 75 three- pront differences with uniform step size in ,, ,,as used The nonlinearity of the...flow prop- "Kutta condition." erties for slender 3D wings are addressed. To begin the The present paper emphasizes recent progress in the de- study

POLLEN FLOW IN THE ENVIRONMENT - DEVELOPMENT OF A RESEARCH PROGRAM

EPA Science Inventory

The USEPA Office of Research and Development seeks to provide to the agency and society the best information relating to the status of the environment and any related technology maintaining environmental quality. In this effort, a recent research workshop (Pollen Mediated Gene Fl...

Transonic Drag Prediction Using an Unstructured Multigrid Solver

NASA Technical Reports Server (NTRS)

Mavriplis, D. J.; Levy, David W.

2001-01-01

This paper summarizes the results obtained with the NSU-3D unstructured multigrid solver for the AIAA Drag Prediction Workshop held in Anaheim, CA, June 2001. The test case for the workshop consists of a wing-body configuration at transonic flow conditions. Flow analyses for a complete test matrix of lift coefficient values and Mach numbers at a constant Reynolds number are performed, thus producing a set of drag polars and drag rise curves which are compared with experimental data. Results were obtained independently by both authors using an identical baseline grid and different refined grids. Most cases were run in parallel on commodity cluster-type machines while the largest cases were run on an SGI Origin machine using 128 processors. The objective of this paper is to study the accuracy of the subject unstructured grid solver for predicting drag in the transonic cruise regime, to assess the efficiency of the method in terms of convergence, cpu time, and memory, and to determine the effects of grid resolution on this predictive ability and its computational efficiency. A good predictive ability is demonstrated over a wide range of conditions, although accuracy was found to degrade for cases at higher Mach numbers and lift values where increasing amounts of flow separation occur. The ability to rapidly compute large numbers of cases at varying flow conditions using an unstructured solver on inexpensive clusters of commodity computers is also demonstrated.

FUN3D and CFL3D Computations for the First High Lift Prediction Workshop

NASA Technical Reports Server (NTRS)

Park, Michael A.; Lee-Rausch, Elizabeth M.; Rumsey, Christopher L.

2011-01-01

Two Reynolds-averaged Navier-Stokes codes were used to compute flow over the NASA Trapezoidal Wing at high lift conditions for the 1st AIAA CFD High Lift Prediction Workshop, held in Chicago in June 2010. The unstructured-grid code FUN3D and the structured-grid code CFL3D were applied to several different grid systems. The effects of code, grid system, turbulence model, viscous term treatment, and brackets were studied. The SST model on this configuration predicted lower lift than the Spalart-Allmaras model at high angles of attack; the Spalart-Allmaras model agreed better with experiment. Neglecting viscous cross-derivative terms caused poorer prediction in the wing tip vortex region. Output-based grid adaptation was applied to the unstructured-grid solutions. The adapted grids better resolved wake structures and reduced flap flow separation, which was also observed in uniform grid refinement studies. Limitations of the adaptation method as well as areas for future improvement were identified.

2003 NASA Seal/Secondary Air System Workshop. Volume 1

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)

2004-01-01

The following reports were included in the 2003 NASA Seal/Secondary Air System Workshop:Low Emissions Alternative Power (LEAP); Overview of NASA Glenn Seal Developments; NASA Ultra Efficient Engine Technology Project Overview; Development of Higher Temperature Abradable Seals for Industrial Gas Turbines; High Misalignment Carbon Seals for the Fan Drive Gear System Technologies; Compliant Foil Seal Investigations; Test Rig for Evaluating Active Turbine Blade Tip Clearance Control Concepts; Controls Considerations for Turbine Active Clearance Control; Non-Contacting Finger Seal Developments and Design Considerations; Effect of Flow-Induced Radial Load on Brush Seal/Rotor Contact Mechanics; Seal Developments at Flowserve Corporation; Investigations of High Pressure Acoustic Waves in Resonators With Seal-Like Features; Numerical Investigations of High Pressure Acoustic Waves in Resonators; Feltmetal Seal Material Through-Flow; "Bimodal" Nuclear Thermal Rocket (BNTR) Propulsion for Future Human Mars Exploration Missions; High Temperature Propulsion System Structural Seals for Future Space Launch Vehicles; Advanced Control Surface Seal Development for Future Space Vehicles; High Temperature Metallic Seal Development for Aero Propulsion and Gas Turbine Applications; and BrazeFoil Honeycomb.

Progress and supercomputing in computational fluid dynamics; Proceedings of U.S.-Israel Workshop, Jerusalem, Israel, December 1984

NASA Technical Reports Server (NTRS)

Murman, E. M. (Editor); Abarbanel, S. S. (Editor)

1985-01-01

Current developments and future trends in the application of supercomputers to computational fluid dynamics are discussed in reviews and reports. Topics examined include algorithm development for personal-size supercomputers, a multiblock three-dimensional Euler code for out-of-core and multiprocessor calculations, simulation of compressible inviscid and viscous flow, high-resolution solutions of the Euler equations for vortex flows, algorithms for the Navier-Stokes equations, and viscous-flow simulation by FEM and related techniques. Consideration is given to marching iterative methods for the parabolized and thin-layer Navier-Stokes equations, multigrid solutions to quasi-elliptic schemes, secondary instability of free shear flows, simulation of turbulent flow, and problems connected with weather prediction.

Thirteenth workshop on geothermal reservoir engineering: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.

1988-01-21

PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico andmore » The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones, Yasmin Gulamani, and Rosalee Benelli for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment, especially Jeralyn Luetkehans. The Thirteenth Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract No. DE-AS07-84ID12529. We deeply appreciate this continued support. Henry J. Ramey, Jr. Paul Kruger Roland N. Horne William E. Brigham Frank G. Miller Jean W. Cook« less

Galaxy distances and deviations from universal expansion; Proceedings of the NATO Advanced Research Workshop, Kona, HI, Jan. 13-17, 1986

NASA Astrophysics Data System (ADS)

Madore, Barry F.; Tully, R. Brent

A collection of papers on galaxy distances and deviations from universal expansion is presented. Individual topics addressed include: new results on the distance scale and the Hubble constant, Magellanic Clouds and the distance scale, CCD observations of Cepheids in nearby galaxies, distances using A supergiant stars, infrared calibration of the Cepheid distance scale, two stepping stones to the Hubble constant, physical models of supernovae and the distance scale, 21 cm line widths and distances of spiral galaxies, infrared color-luminosity relations for field galaxies, minimizing the scatter in the Tully-Fisher relation, photometry of galaxies and the local peculiar motion, elliptical galaxies and nonuniformities in the Hubble flow, and large-scale anisotropy in the Hubble flow. Also discussed are: improved distance indicator for elliptical galaxies, anisotropy of galaxies detected by IRAS, the local gravitational field, measurements of the CBR, measure of cosmological times, ages from nuclear cosmochronology, extragalactic gas at high redshift, supercluster infall models, Virgo infall and the mass density of the universe, dynamics of superclusters and Omega(0), distribution of galaxies versus dark matter, peculiar velocities and galaxy formation, cosmological shells and blast waves.

Development of an algebraic stress/two-layer model for calculating thrust chamber flow fields

NASA Technical Reports Server (NTRS)

Chen, C. P.; Shang, H. M.; Huang, J.

1993-01-01

Following the consensus of a workshop in Turbulence Modeling for Liquid Rocket Thrust Chambers, the current effort was undertaken to study the effects of second-order closure on the predictions of thermochemical flow fields. To reduce the instability and computational intensity of the full second-order Reynolds Stress Model, an Algebraic Stress Model (ASM) coupled with a two-layer near wall treatment was developed. Various test problems, including the compressible boundary layer with adiabatic and cooled walls, recirculating flows, swirling flows and the entire SSME nozzle flow were studied to assess the performance of the current model. Detailed calculations for the SSME exit wall flow around the nozzle manifold were executed. As to the overall flow predictions, the ASM removes another assumption for appropriate comparison with experimental data, to account for the non-isotropic turbulence effects.

Turbulence modelling of flow fields in thrust chambers

NASA Technical Reports Server (NTRS)

Chen, C. P.; Kim, Y. M.; Shang, H. M.

1993-01-01

Following the consensus of a workshop in Turbulence Modelling for Liquid Rocket Thrust Chambers, the current effort was undertaken to study the effects of second-order closure on the predictions of thermochemical flow fields. To reduce the instability and computational intensity of the full second-order Reynolds Stress Model, an Algebraic Stress Model (ASM) coupled with a two-layer near wall treatment was developed. Various test problems, including the compressible boundary layer with adiabatic and cooled walls, recirculating flows, swirling flows, and the entire SSME nozzle flow were studied to assess the performance of the current model. Detailed calculations for the SSME exit wall flow around the nozzle manifold were executed. As to the overall flow predictions, the ASM removes another assumption for appropriate comparison with experimental data to account for the non-isotropic turbulence effects.

Global tropospheric chemistry: Chemical fluexes in the global atmosphere

NASA Technical Reports Server (NTRS)

Lenschow, Donald H. (Editor); Hicks, Bruce B. (Editor)

1989-01-01

In October 1987, NSF, NASA, and NOAA jointly sponsored a workshop at Columbia University to assess the experimental tools and analysis procedures in use and under development to measure and understand gas and particle fluxes across this critical air-surface boundary. Results are presented for that workshop. It is published to summarize the present understanding of the various measurement techniques that are available, identify promising new technological developments for improved measurements, and stimulate thinking about this important measurement challenge.

Insider Threat Mitigation Workshop Instructional Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gibbs, Philip; Larsen, Robert; O'Brien, Mike

Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt theft of nuclear materials. This report is a compilation of workshop materials consisting of lectures on technical and administrative measures used in Physical Protection (PP) and Material Control and Accounting (MC&A) and methods for analyzing their effectiveness against a postulated insider threat.

Cosmic ray diffusion: Report of the Workshop in Cosmic Ray Diffusion Theory

NASA Technical Reports Server (NTRS)

Birmingham, T. J.; Jones, F. C.

1975-01-01

A workshop in cosmic ray diffusion theory was held at Goddard Space Flight Center on May 16-17, 1974. Topics discussed and summarized are: (1) cosmic ray measurements as related to diffusion theory; (2) quasi-linear theory, nonlinear theory, and computer simulation of cosmic ray pitch-angle diffusion; and (3) magnetic field fluctuation measurements as related to diffusion theory.

An Overview of the Annual NASA Tire/Runway Friction Workshop and Lessons Learned

NASA Technical Reports Server (NTRS)

Yager, Thomas J.

2005-01-01

This paper summarizes the organization efforts, objectives, scope, agenda, test procedures and results from eleven years of conducting the NASA Tire/Runway Friction Workshop. The paper will also summarize the lessons learned between 1994 and 2004. A description of the various friction, texture and roughness equipment used during these workshops at NASA Wallops Flight Facility on the eastern shore of Virginia will be provided together with the range of test surfaces available for evaluation. The need for friction measuring equipment calibration centers is discussed and plans for future workshops are identified.

Rotational Seismology Workshop of February 2006

USGS Publications Warehouse

Evans, John R.; Cochard, A.; Graizer, Vladimir; Huang, Bor-Shouh; Hudnut, Kenneth W.; Hutt, Charles R.; Igel, H.; Lee, William H.K.; Liu, Chun-Chi; Majewski, Eugeniusz; Nigbor, Robert; Safak, Erdal; Savage, William U.; Schreiber, U.; Teisseyre, Roman; Trifunac, Mihailo; Wassermann, J.; Wu, Chien-Fu

2007-01-01

Introduction A successful workshop titled 'Measuring the Rotation Effects of Strong Ground Motion' was held simultaneously in Menlo Park and Pasadena via video conference on 16 February 2006. The purpose of the Workshop and this Report are to summarize existing data and theory and to explore future challenges for rotational seismology, including free-field strong motion, structural strong motion, and teleseismic motions. We also forged a consensus on the plan of work to be pursued by this international group in the near term. At this first workshop were 16 participants in Menlo Park, 13 in Pasadena, and a few on the telephone. It was organized by William H. K. Lee and John R. Evans and chaired by William U. Savage in Menlo Park and by Kenneth W. Hudnut in Pasadena. Its agenda is given in the Appendix. This workshop and efforts in Europe led to the creation of the International Working Group on Rotational Seismology (IWGoRS), an international volunteer group providing forums for exchange of ideas and data as well as hosting a series of Workshops and Special Sessions. IWGoRS created a Web site, backed by an FTP site, for distribution of materials related to rotational seismology. At present, the FTP site contains the 2006 Workshop agenda (also given in the Appendix below) and its PowerPoint presentations, as well as many papers (reasonable-only basis with permission of their authors), a comprehensive citations list, and related information. Eventually, the Web site will become the sole authoritative source for IWGoRS and shared information: http://www.rotational-seismology.org ftp://ehzftp.wr.usgs.gov/jrevans/IWGoRS_FTPsite/ With contributions from various authors during and after the 2006 Workshop, this Report proceeds from the theoretical bases for making rotational measurements (Graizer, Safak, Trifunac) through the available observations (Huang, Lee, Liu, Nigbor), proposed suites of measurements (Hudnut), a discussion of broadband teleseismic rotational seismology (Cochard, Igel, Schreiber, Teisseyre, Wassermann, Majewski), sensor-calibration issues (Evans, Hutt), and finally the summary and conclusions (Savage). As a direct result of the 2006 Workshop and the formation of IWGoRS, we held a special session at the Fall 2006 AGU meeting (convened by H. Igel, W.H.K. Lee, and M.I. Todorovska). Currently, the first formal Workshop of the IWGoRS is being organized by W.H.K. Lee, M. Celebi, and M. I. Todorovska with sponsorship by the USGS and assistance from many others; this First International Workshop on Rotational Seismology and Engineering Applications will be held in September 2007 at Menlo Park, California (http://pubs.usgs.gov/of/2007/1144/). The following summarizes presentations and discussions during and shortly after the informal Workshop of February 2006.

Proceedings of a workshop on the development and evaluation of habitat suitability criteria: A compilation of papers and discussions presented at Colorado State University, Fort Collins, Colorado, December 8-12, 1986

USGS Publications Warehouse

Bovee, Ken; Zuboy, J.R.

1988-01-01

The development of reliable habitat suitability criteria is critical to the successful implementation of the Instream Flow Incremental Methodology (IFIM), or any other habitat based evaluation technology. It is also a fascinating topic of research, for several reasons. First, the “science” of habitat quantification is relatively young. Descriptions of habitat use and partitioning can be traced back to Darwin, if not further. Attempts to actually quantify habitat use can be found predominantly during the last two decades, with most of the activity occurring in about the last five years. Second, this work is challenging because we are usually working with fish or some other organism that lives out of sight in an environment that is foreign to humans. Most of the data collection techniques that have been developed for standard fisheries work are unsuited, without modification, for criteria development. These factors make anyone involved in this type of research a pioneer, of sorts. Pioneers often make new and wonderful discoveries, but they also sometimes get lost. In our opinion, however, there is an even more rewarding aspect to criteria development research. It seems that the field of biology has tended to become increasingly clinical over the years. Criteria development demands the unobtrusive observation of organisms in their natural environment, a fact that allows the biological to be a naturalist and still get paid for it. The relative youth and importance of habitat quantification have resulted in rapid advancements in the state of the art. The expansion of methods is vividly demonstrated simply by comparing the two Instream Flow Information Papers written on the subject in 1978 and in 1986. One of the missions of the Aquatic Systems Branch (formerly the Instream Flow Group) is to serve as a clearinghouse for new techniques and methods. In keeping with this role, a workshop was conducted during December 1986 to discuss current and newly evolving methods for developing and evaluating habitat suitability criteria. Participation in this workshop was largely by invitation only. The objective was to obtain insights into problems and possible solutions to criteria development, from the perspective of professionals closely involved with the subject. These proceedings of that workshop are intended to supplement the information contained in Instream Flow Information Paper 21, "Development and Evaluation of Habitat Suitability Criteria for Use in the Instream Flow Incremental Methodology." The workshop was closely arranged in five sessions, roughly following the outline of Information Paper 21. The first session dealt with various aspects of study design and how they can influence the outcome of a study. Session two investigated techniques for developing criteria from professional judgment, and some of the problems encountered when personal or agency prejudice enters the picture. Session three concentrated on field data collection procedures, whereas session four examined methods of converting field data into curves. Field verification studies were discussed in session five. Each presentation in the workshop was followed by a question and answer period of 15 to 30 minutes. These discussions were recorded, transcribed, and appended to the end of each paper in these proceedings. We have attempted to capture the essence of these discussions as accurately as possible, but hope that the reader can appreciate the difficulty in translating a free-ranging discussion (from a barely audible tape) to something that makes sense in print. These question and answer sessions constitute the peer review for each of the papers. This provides the reader with the unique opportunity to review the interactions between authors and reviewers.

Workshop: Economic Research and Policy Concerning Water Use and Watershed Management (1999)

EPA Pesticide Factsheets

Workshop proceedings: Integrating Economic and Physical Models in Water and Watershed Research, Methods for Measuring Stakeholder Values of Water Quality and Watershed Protection, and Applications of Stakeholder Valuation Techniques for Watersheds and WQ

Ozone profile measurements at McMurdo Station Antarctica during the spring of 1987

NASA Technical Reports Server (NTRS)

Hofmann, D. J.; Harder, J. W.; Rosen, J. M.; Hereford, J.; Carpenter, J. R.

1988-01-01

During the Antarctic spring of 1986, 33 ozone soundings were conducted from McMurdo Station. These data indicated that the springtime decrease in ozone occurred rapidly between the altitudes of 12 and 20 km. During 1987, these measurements were repeated with 50 soundings between 29 August and 9 November. Digital conversions of standard electrochemical cell ozonesondes were again employed. The ozonesonde pumps were individually calibrated for flow rate as the high altitude performance of these pumps have been in question. While these uncertainties are not large in the region of the ozone hole, they are significant at high altitude and apparently resulted in an underestimate of total ozone of about 7 percent (average) as compared to the Total Ozone Mapping Spectrometer (TOMS) in 1986, when the flow rate recommended by the manufacturer was used. At the upper altitudes (approx. 30 km) the flow rate may be overestimated by as much as 15 percent using recommended values (see Harder et al., The UW Digital Ozonesonde: Characteristics and Flow Rate Calibration, poster paper, this workshop). These upper level values are used in the extrapolation, at constant mixing ratio, required to complete the sounding for total ozone. The first sounding was on 29 August, prior to major ozone depletion, when 274 DU total ozone (25 DU extrapolated) was observed. By early October total ozone had decreased to the 150 DU range; it then increased during mid-October owing to motion of the vortex and returned to a value of 148 DU (29 DU extrapolated) on 27 October.

Steady potential solver for unsteady aerodynamic analyses

NASA Technical Reports Server (NTRS)

Hoyniak, Dan

1994-01-01

Development of a steady flow solver for use with LINFLO was the objective of this report. The solver must be compatible with LINFLO, be composed of composite mesh, and have transonic capability. The approaches used were: (1) steady flow potential equations written in nonconservative form; (2) Newton's Method; (3) implicit, least-squares, interpolation method to obtain finite difference equations; and (4) matrix inversion routines from LINFLO. This report was given during the NASA LeRC Workshop on Forced Response in Turbomachinery in August of 1993.

A Workshop on Environmental Technology Assessment Held at the University of Cambridge, England Held on 24-26 April, 1985,

DTIC Science & Technology

1985-01-01

almost immediately upon corona onset, the current starts to flow uncontrollably with an immediate decrease in voltage which stops the ESP from...operating. With large diameter electrodes, the current starts to flow at the corona onset point and there is a range where it varies with increasing voltage...Modal. WEST GERMANY - Use of a Pibersape for Control Purpoaes in toe sarixo uitr3ioutioa bysta. -Special Cent Mortar Lining of Ductile Cat Iron Pipes

Abstracts of Presentations at Workshop on Unsteady and Two-Phase-Flows, Held in London, England on June 28-29, 1990

DTIC Science & Technology

1990-06-29

has been found to be a modification of the STAN’ program from Crawford and Kays2. An important characteristic of any boundary layer prediction program...function of freestream turbulence intensity, helped in predicting heat transfer rates between the hot gases and the b’arie surface. a Professor...be a modulator of transition to turbulence and the boundary layer prediction programs currently available have a poor performance in such flows

Skylab

NASA Image and Video Library

1972-05-01

This image is a wide-angle view of the Orbital Workshop waste management compartment. The waste management facilities presented a unique challenge to spacecraft designers. In addition to collection of liquid and solid human wastes, there was a medical requirement to dry all solid human waste products and to return the residue to Earth for examination. Liquid human waste (urine) was frozen for return to Earth. Total quantities of each astronaut's liquid and solid wastes were precisely measured. Cabin air was drawn into the toilet, shown on the wall at right in this photograph, and over the waste products to generate a flow of the waste in the desired direction. The air was then filtered for odor control and antiseptic purposes prior to being discharged back into the cabin.

Technical Training Workshop on International Safeguards: An Introduction to Safeguards for Emerging Nuclear States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frazar, Sarah L.; Gastelum, Zoe N.; Olson, Jarrod

2009-10-06

The U.S. Department of Energy/National Nuclear Security Administration (DOE/NNSA) hosted a workshop from May 4-22, 2009, on the fundamental elements of international safeguards. Entitled "A Technical Training Workshop on International Safeguards," the workshop introduced post-graduate students from Malaysia, Vietnam, Indonesia, Thailand, Morocco, Egypt, Algeria and Tunisia to the fundamental issues and best practices associated with international safeguards and encouraged them to explore potential career paths in safeguards. Workshops like these strengthen the international safeguards regime by promoting the development of a "safeguards culture" among young nuclear professionals within nascent nuclear countries. While this concept of safeguards culture is sometimes hardmore » to define and even harder to measure, this paper will demonstrate that the promotion of safeguards cultures through workshops like these justifies the investment of U.S. taxpayer dollars.« less

Family Systems Training for Medical Students.

PubMed

Thabrew, Hiran

2018-05-01

To evaluate whether a workshop on family systems delivered to medical students could improve participants' understanding of families from a systemic point of view and help them recognise and address systemic issues that may be affecting their patients. Fifth year (senior) medical students ( n = 36) from the University of Auckland participated in a 90-min workshop about family systems. Pre- and post-workshop, self-reported measures of knowledge and confidence were completed and qualitative feedback was also obtained from participants. The workshop was well received and its interactive and role-play based nature were particularly appreciated. Participants reported gains in all explored areas of knowledge and understanding, suggesting that the workshop met its desired aims. This workshop is an educationally effective and expedient way to equip medical students with some knowledge and understanding about family systems. It may benefit their future work with individual patients and families.

Improving collaborative care in managing eating disorders: a pilot study.

PubMed

Heath, Olga; English, Denise; Simms, Joanne; Ward, Pamela; Hollett, Ann; Dominic, Anna

2013-01-01

The purpose of this pilot study was to evaluate the impact of a continuing interprofessional educational workshop focused on eating disorders in a rural area in Newfoundland and Labrador (NL), Canada. The pilot study helped determine if the eating disorder workshop was feasible for implementation to a broader audience. A conceptual model developed by our eating disorder team and described in the article guided this innovative program. The intensive 2-day workshop was piloted in one community with 41 health and education professionals in attendance. A key element was the focus on creating and sustaining collaborative care for eating disorders. Participants completed pre-post workshop measures of interprofessional attitudes and skills, self-reported knowledge, confidence, and intention to change practice (post questionnaire only). A 6-month follow-up survey measured self-reported practice change. There were significant positive changes in interprofessional attitudes and skills as well as knowledge and confidence in collaborative management of eating disorders. Post-workshop, 69% (n = 24/35) of participants indicated intention to change practice, and on follow-up, 7 of 10 respondents reported implementing changes in practice as a result of the workshop. Low response rate at follow-up was a limitation. Results support the impact of the workshop in improving knowledge, confidence, and attitudes toward collaboration and changing practice and the value of implementing the program province-wide. Copyright © 2013 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on CME, Association for Hospital Medical Education.

EDITORIAL: Molecular Imaging Technology

NASA Astrophysics Data System (ADS)

Asai, Keisuke; Okamoto, Koji

2006-06-01

'Molecular Imaging Technology' focuses on image-based techniques using nanoscale molecules as sensor probes to measure spatial variations of various species (molecular oxygen, singlet oxygen, carbon dioxide, nitric monoxide, etc) and physical properties (pressure, temperature, skin friction, velocity, mechanical stress, etc). This special feature, starting on page 1237, contains selected papers from The International Workshop on Molecular Imaging for Interdisciplinary Research, sponsored by the Ministry of Education, Culture, Sports, Science and Technology (MEXT) in Japan, which was held at the Sendai Mediatheque, Sendai, Japan, on 8 9 November 2004. The workshop was held as a sequel to the MOSAIC International Workshop that was held in Tokyo in 2003, to summarize the outcome of the 'MOSAIC Project', a five-year interdisciplinary project supported by Techno-Infrastructure Program, the Special Coordination Fund for Promotion of Science Technology to develop molecular sensor technology for aero-thermodynamic research. The workshop focused on molecular imaging technology and its applications to interdisciplinary research areas. More than 110 people attended this workshop from various research fields such as aerospace engineering, automotive engineering, radiotechnology, fluid dynamics, bio-science/engineering and medical engineering. The purpose of this workshop is to stimulate intermixing of these interdisciplinary fields for further development of molecular sensor and imaging technology. It is our pleasure to publish the seven papers selected from our workshop as a special feature in Measurement and Science Technology. We will be happy if this issue inspires people to explore the future direction of molecular imaging technology for interdisciplinary research.

Safety Sensor Testing Laboratory | Hydrogen and Fuel Cells | NREL

Science.gov Websites

collaborations, trainings and workshops, and academic research and development support. Work in the laboratory (temperature, pressure, and relative humidity) and gas parameters (flow and composition) Quantitative sensor services to assist end-users on sensor selection and use Assist developers in quantitative assessment of

EPA's Sustainable Port Communities: Anticipating Changes in Exposures and a Proposal to Facilitate Resilience through Knowledge Flows (MTS Workshop May 2017)

EPA Science Inventory

Port Communities Face Many Challenges: • Climate change – Sea Level Rise, Extreme Events: “Assets” become Vulnerabilities; Nuisance flooding; Changes in waste water and stormwater capacity; Changes in near-shore ecology and water quality • Port Exp...

Lexivisions: Making Meaning through Imaging.

ERIC Educational Resources Information Center

Iovino, Linda

In a high school writing workshop, students frequently would go through multiple essay drafts and conferences with the teacher and fellow students before realizing that their theses were incorrect. A teacher devised the "lexivision" to address this problem. Students used Venn diagrams, graphs, or flow charts to represent concepts in the…

Flow Visualization Study of Natural Convection from a Heated Protrusion in a Liquid Filled Rectangular Enclosure.

DTIC Science & Technology

1983-12-01

PROPOSED SOLUTIONS Many papers have been published outlining alternative methods of thermally controlling microelectronic devices. Hannemann [3] describes...Workshop, NSF Grant ENG-7701297, Directions of Heat Transfer in Electronic Equipment, Fy R. C. Chu, 1977. 3. Hannemann , R., "Electronic System Thermal

Seals/Secondary Fluid Flows Workshop 1997; Volume I

NASA Technical Reports Server (NTRS)

Hendricks, Robert C. (Editor)

2006-01-01

The 1997 Conference provided discussions and data on (a) program overviews, (b) developments in seals and secondary air management systems, (c) interactive seals flows with secondary air or fluid flows and powerstream flows, (d) views of engine externals and limitations, (e) high speed engine research sealing needs and demands, and (f) a short course on engine design development margins. Sealing concepts discussed include, mechanical rim and cavity seals, leaf, finger, air/oil, rope, floating-brush, floating-T-buffer, and brush seals. Engine externals include all components of engine fluid systems, sensors and their support structures that lie within or project through the nacelle. The clean features of the nacelle belie the minefield of challenges and opportunities that lie within. Seals; Secondary air flows; Rotordynamics; Gas turbine; Aircraft; CFD; Testing; Turbomachinery

Proceedings of the 11th JPL Airborne Earth Science Workshop

NASA Technical Reports Server (NTRS)

Green, Robert O.

2002-01-01

This publication contains the proceedings of the JPL Airborne Earth Science Workshop forum held to report science research and applications results with spectral images measured by the NASA Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). These papers were presented at the Jet Propulsion Laboratory from March 5-8, 2001. Electronic versions of these papers may be found at the A VIRIS Web http://popo.jpl.nasa.gov/pub/docs/workshops/aviris.proceedings.html

Analysis of Low-Speed Stall Aerodynamics of a Swept Wing with Laminar-Flow Glove

NASA Technical Reports Server (NTRS)

Bui, Trong T.

2014-01-01

Reynolds-Averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) analysis was conducted to study the low-speed stall aerodynamics of a GIII aircraft's swept wing modified with a laminar-flow wing glove. The stall aerodynamics of the gloved wing were analyzed and compared with the unmodified wing for the flight speed of 120 knots and altitude of 2300 ft above mean sea level (MSL). The Star-CCM+ polyhedral unstructured CFD code was first validated for wing stall predictions using the wing-body geometry from the First American Institute of Aeronautics and Astronautics (AIAA) CFD High-Lift Prediction Workshop. It was found that the Star-CCM+ CFD code can produce results that are within the scattering of other CFD codes considered at the workshop. In particular, the Star-CCM+ CFD code was able to predict wing stall for the AIAA wing-body geometry to within 1 degree of angle of attack as compared to benchmark wind-tunnel test data. Current results show that the addition of the laminar-flow wing glove causes the gloved wing to stall much earlier than the unmodified wing. Furthermore, the gloved wing has a different stall characteristic than the clean wing, with no sharp lift drop-off at stall for the gloved wing.

Analysis of Low Speed Stall Aerodynamics of a Swept Wing with Laminar Flow Glove

NASA Technical Reports Server (NTRS)

Bui, Trong T.

2014-01-01

Reynolds-Averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) analysis was conducted to study the low-speed stall aerodynamics of a GIII aircraft's swept wing modified with a laminar-flow wing glove. The stall aerodynamics of the gloved wing were analyzed and compared with the unmodified wing for the flight speed of 120 knots and altitude of 2300 ft above mean sea level (MSL). The Star-CCM+ polyhedral unstructured CFD code was first validated for wing stall predictions using the wing-body geometry from the First American Institute of Aeronautics and Astronautics (AIAA) CFD High-Lift Prediction Workshop. It was found that the Star-CCM+ CFD code can produce results that are within the scattering of other CFD codes considered at the workshop. In particular, the Star-CCM+ CFD code was able to predict wing stall for the AIAA wing-body geometry to within 1 degree of angle of attack as compared to benchmark wind-tunnel test data. Current results show that the addition of the laminar-flow wing glove causes the gloved wing to stall much earlier than the unmodified wing. Furthermore, the gloved wing has a different stall characteristic than the clean wing, with no sharp lift drop-off at stall for the gloved wing.

Performance Comparison of NAMI DANCE and FLOW-3D® Models in Tsunami Propagation, Inundation and Currents using NTHMP Benchmark Problems

NASA Astrophysics Data System (ADS)

Velioglu Sogut, Deniz; Yalciner, Ahmet Cevdet

2018-06-01

Field observations provide valuable data regarding nearshore tsunami impact, yet only in inundation areas where tsunami waves have already flooded. Therefore, tsunami modeling is essential to understand tsunami behavior and prepare for tsunami inundation. It is necessary that all numerical models used in tsunami emergency planning be subject to benchmark tests for validation and verification. This study focuses on two numerical codes, NAMI DANCE and FLOW-3D®, for validation and performance comparison. NAMI DANCE is an in-house tsunami numerical model developed by the Ocean Engineering Research Center of Middle East Technical University, Turkey and Laboratory of Special Research Bureau for Automation of Marine Research, Russia. FLOW-3D® is a general purpose computational fluid dynamics software, which was developed by scientists who pioneered in the design of the Volume-of-Fluid technique. The codes are validated and their performances are compared via analytical, experimental and field benchmark problems, which are documented in the ``Proceedings and Results of the 2011 National Tsunami Hazard Mitigation Program (NTHMP) Model Benchmarking Workshop'' and the ``Proceedings and Results of the NTHMP 2015 Tsunami Current Modeling Workshop". The variations between the numerical solutions of these two models are evaluated through statistical error analysis.

Effect of Turbulence Models on Two Massively-Separated Benchmark Flow Cases

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.

2003-01-01

Two massively-separated flow cases (the 2-D hill and the 3-D Ahmed body) were computed with several different turbulence models in the Reynolds-averaged Navier-Stokes code CFL3D as part of participation in a turbulence modeling workshop held in Poitiers, France in October, 2002. Overall, results were disappointing, but were consistent with results from other RANS codes and other turbulence models at the workshop. For the 2-D hill case, those turbulence models that predicted separation location accurately ended up yielding a too-long separation extent downstream. The one model that predicted a shorter separation extent in better agreement with LES data did so only by coincidence: its prediction of earlier reattachment was due to a too-late prediction of the separation location. For the Ahmed body, two slant angles were computed, and CFD performed fairly well for one of the cases (the larger slant angle). Both turbulence models tested in this case were very similar to each other. For the smaller slant angle, CFD predicted massive separation, whereas the experiment showed reattachment about half-way down the center of the face. These test cases serve as reminders that state- of-the-art CFD is currently not a reliable predictor of massively-separated flow physics, and that further validation studies in this area would be beneficial.

An AHP-based evaluation method for teacher training workshop on information and communication technology.

PubMed

Lucas, Rochelle Irene; Promentilla, Michael Angelo; Ubando, Aristotle; Tan, Raymond Girard; Aviso, Kathleen; Yu, Krista Danielle

2017-08-01

The emergence of information and communication technology (ICT) has created opportunities for enhancing the learning process at different educational levels. However, its potential benefits can only be fully realized if teachers are properly trained to utilize such tools. The rapid evolution of ICT also necessitates rigorous assessment of training programs by participants. Thus, this study proposes an evaluation framework based on the Analytic Hierarchy Process (AHP) to systematically evaluate such workshops designed for teachers. The evaluation model is decomposed hierarchically into four main criteria namely: (1) workshop design, (2) quality of content of the workshop, (3) quality of delivery of the content of the workshop, and the (4) relevance of the workshop. These criteria are further disaggregated into 24 sub-indicators to measure the effectiveness of the workshop as perceived by the participants based on their own expectations. This framework is applied to a case study of ICT workshops done in the Philippines. In this case, relevance of the workshop is found to be the most important main criterion identified by the participants, particularly on the new ICT knowledge that promotes teachers' professional growth and development. The workshop evaluation index (WEI) is also proposed as a metric to support decision-making by providing a mechanism for benchmarking performance, tracking improvement over time, and developing strategies for the design and improvement of training programs or workshops on ICT for teachers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Application of Exactly Linearized Error Transport Equations to AIAA CFD Prediction Workshops

NASA Technical Reports Server (NTRS)

Derlaga, Joseph M.; Park, Michael A.; Rallabhandi, Sriram

2017-01-01

The computational fluid dynamics (CFD) prediction workshops sponsored by the AIAA have created invaluable opportunities in which to discuss the predictive capabilities of CFD in areas in which it has struggled, e.g., cruise drag, high-lift, and sonic boom pre diction. While there are many factors that contribute to disagreement between simulated and experimental results, such as modeling or discretization error, quantifying the errors contained in a simulation is important for those who make decisions based on the computational results. The linearized error transport equations (ETE) combined with a truncation error estimate is a method to quantify one source of errors. The ETE are implemented with a complex-step method to provide an exact linearization with minimal source code modifications to CFD and multidisciplinary analysis methods. The equivalency of adjoint and linearized ETE functional error correction is demonstrated. Uniformly refined grids from a series of AIAA prediction workshops demonstrate the utility of ETE for multidisciplinary analysis with a connection between estimated discretization error and (resolved or under-resolved) flow features.

FUN3D Analyses in Support of the Second Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Chwalowski, Pawel; Heeg, Jennifer

2016-01-01

This paper presents the computational aeroelastic results generated in support of the second Aeroelastic Prediction Workshop for the Benchmark Supercritical Wing (BSCW) configurations and compares them to the experimental data. The computational results are obtained using FUN3D, an unstructured grid Reynolds- Averaged Navier-Stokes solver developed at NASA Langley Research Center. The analysis results include aerodynamic coefficients and surface pressures obtained for steady-state, static aeroelastic equilibrium, and unsteady flow due to a pitching wing or flutter prediction. Frequency response functions of the pressure coefficients with respect to the angular displacement are computed and compared with the experimental data. The effects of spatial and temporal convergence on the computational results are examined.

Analysis of viscous transonic flow over airfoil sections

NASA Technical Reports Server (NTRS)

Huff, Dennis L.; Wu, Jiunn-Chi; Sankar, L. N.

1987-01-01

A full Navier-Stokes solver has been used to model transonic flow over three airfoil sections. The method uses a two-dimensional, implicit, conservative finite difference scheme for solving the compressible Navier-Stokes equations. Results are presented as prescribed for the Viscous Transonic Airfoil Workshop to be held at the AIAA 25th Aerospace Sciences Meeting. The NACA 0012, RAE 2822 and Jones airfoils have been investigated for both attached and separated transonic flows. Predictions for pressure distributions, loads, skin friction coefficients, boundary layer displacement thickness and velocity profiles are included and compared with experimental data when possible. Overall, the results are in good agreement with experimental data.

Environmental risk assessment of CRT and PCB workshops in a mobile e-waste recycling plant.

PubMed

Song, Qingbin; Zeng, Xianlai; Li, Jinhui; Duan, Huabo; Yuan, Wenyi

2015-08-01

The mobile e-waste recycling equipment was chosen as the object of this study, including manual dismantling, mechanical separation of cathode ray tubes (CRTs), and printed circuit boards (PCBs) in the two independent workshops. To determine the potential environmental contamination, the noise, the heavy metals (Cu, Cd, Pb), and the environmental impacts of the e-waste recycling processes in the two workshops of the mobile plant have been evaluated in this paper. This study determined that when control measures are employed, the noise within the two workshops (<80 dB) will meet the national standards. In the CRT workshop, Pb was the most polluting metal, with 2.3 μg/m(3) and 10.53 mg/g in the air and floor dust, respectively. The result of a health risk assessment shows that noncancerous effects are possible for Pb (hazard index (HI) = 3.54 in the CRT workshop and HI = 1.27 in the PCB workshop). The carcinogenic risks to workers for Cd are relatively light in both the workshops. From the results of life cycle assessment (LCA), it can be seen that there was an environmental benefit from the e-waste recycling process as a whole.

EML indoor radon workshop, 1982

DOE Office of Scientific and Technical Information (OSTI.GOV)

George, A.C.; Lowder, W.; Fisenne, I.

1983-07-01

A workshop on indoor radon, held at the Environmental Measurements Laboratory (EML) on November 30 and December 1, 1982, covered recent developments in radon daughter research and development. Thirty papers were presented dealing with standardization and quality assurance measurement methods, surveys, measurements strategy, physical mechanisms of radon and radon daughter transport and development of guidance standards for indoor exposures. The workshop concluded with a planning session that identified the following needs: (1) national and international intercomparisons of techniques for measuring radon and radon daughter concentrations, working level and radon exhalation flux density; (2) development and refinement of practical measurement techniquesmore » for thoron and its daughter products; (3) quantitative definition of the sources of indoor radon and the mechanisms of transport into structures; (4) better knowledge of the physical properties of radon daughters; (5) more complete and accurate data on the population exposure to radon, which can only be met by broadly based surveys; and (6) more international cooperation and information exchange among countries with major research programs.« less

Incorporating sustainability into TxDOT's transportation decision-making : interactive workshop

DOT National Transportation Integrated Search

2010-01-01

The workshop is intended for new and experienced technical staff in TxDOT headquarters, district, and area offices to better understand how sustainability performance measures can be used at the sketch-planning level of project consideration. The wor...

Summary of Orbital Debris Workshop

NASA Technical Reports Server (NTRS)

Kessler, D. J.

1982-01-01

An Orbital Debris Workshop was conducted in July 1982. The working groups established were related to measurements of large particles, modeling of large particles, measurements of small particles, spacecraft hazard and shielding requirements, and space object management. The results of the Orbital Debris Workshop reaffirm the need for research to better understand the character of orbital debris, its effects on future spacecraft, and the related requirements for policy. A clear charter is required for this research to receive the necessary support, focus, and coordination. It was recommended that NASA assume the role of lead agency. The first task is to develop an overall plan with both Department of Defense and the North American Aerospace Defense Command participation.

Electronics reliability and measurement technology

NASA Technical Reports Server (NTRS)

Heyman, Joseph S. (Editor)

1987-01-01

A summary is presented of the Electronics Reliability and Measurement Technology Workshop. The meeting examined the U.S. electronics industry with particular focus on reliability and state-of-the-art technology. A general consensus of the approximately 75 attendees was that "the U.S. electronics industries are facing a crisis that may threaten their existence". The workshop had specific objectives to discuss mechanisms to improve areas such as reliability, yield, and performance while reducing failure rates, delivery times, and cost. The findings of the workshop addressed various aspects of the industry from wafers to parts to assemblies. Key problem areas that were singled out for attention are identified, and action items necessary to accomplish their resolution are recommended.

The workload analysis in welding workshop

NASA Astrophysics Data System (ADS)

Wahyuni, D.; Budiman, I.; Tryana Sembiring, M.; Sitorus, E.; Nasution, H.

2018-03-01

This research was conducted in welding workshop which produces doors, fences, canopies, etc., according to customer’s order. The symptoms of excessive workload were seen from the fact of employees complaint, requisition for additional employees, the lateness of completion time (there were 11 times of lateness from 28 orders, and 7 customers gave complaints). The top management of the workshop assumes that employees’ workload was still a tolerable limit. Therefore, it was required workload analysis to determine the number of employees required. The Workload was measured by using a physiological method and workload analysis. The result of this research can be utilized by the workshop for a better workload management.

Optical Rain Gauge Performance: Second Workshop on Optical Rain Gauge Measurements

NASA Technical Reports Server (NTRS)

Short, David A. (Editor); Thiele, Otto W. (Editor); Mcphaden, Michael J. (Editor)

1994-01-01

The primary focus of the workshop was on the performance and reliability of STi mini-Optical Rain Gauges in a number of environments, including deployments on ships and buoys in the western equatorial Pacific Ocean during the TOGA/COARE field experiment, deployments on buoys in U.S. coastal waters, and comparisons with other types of rain gauges on the Virginia coast and in Florida. The workshop was attended by 20 investigators, representing 10 different institutions, who gathered to present new results obtained since the first workshop (April 1993), to discuss problems, to consider solutions, and to chart future directions. Post-TOGA/COARE calibration studies were also presented.

NASA Lewis Research Center Futuring Workshop

NASA Technical Reports Server (NTRS)

Boroush, Mark; Stover, John; Thomas, Charles

1987-01-01

On October 21 and 22, 1986, the Futures Group ran a two-day Futuring Workshop on the premises of NASA Lewis Research Center. The workshop had four main goals: to acquaint participants with the general history of technology forecasting; to familiarize participants with the range of forecasting methodologies; to acquaint participants with the range of applicability, strengths, and limitations of each method; and to offer participants some hands-on experience by working through both judgmental and quantitative case studies. Among the topics addressed during this workshop were: information sources; judgmental techniques; quantitative techniques; merger of judgment with quantitative measurement; data collection methods; and dealing with uncertainty.

Application of the FUN3D Unstructured-Grid Navier-Stokes Solver to the 4th AIAA Drag Prediction Workshop Cases

NASA Technical Reports Server (NTRS)

Lee-Rausch, Elizabeth M.; Hammond, Dana P.; Nielsen, Eric J.; Pirzadeh, S. Z.; Rumsey, Christopher L.

2010-01-01

FUN3D Navier-Stokes solutions were computed for the 4th AIAA Drag Prediction Workshop grid convergence study, downwash study, and Reynolds number study on a set of node-based mixed-element grids. All of the baseline tetrahedral grids were generated with the VGRID (developmental) advancing-layer and advancing-front grid generation software package following the gridding guidelines developed for the workshop. With maximum grid sizes exceeding 100 million nodes, the grid convergence study was particularly challenging for the node-based unstructured grid generators and flow solvers. At the time of the workshop, the super-fine grid with 105 million nodes and 600 million elements was the largest grid known to have been generated using VGRID. FUN3D Version 11.0 has a completely new pre- and post-processing paradigm that has been incorporated directly into the solver and functions entirely in a parallel, distributed memory environment. This feature allowed for practical pre-processing and solution times on the largest unstructured-grid size requested for the workshop. For the constant-lift grid convergence case, the convergence of total drag is approximately second-order on the finest three grids. The variation in total drag between the finest two grids is only 2 counts. At the finest grid levels, only small variations in wing and tail pressure distributions are seen with grid refinement. Similarly, a small wing side-of-body separation also shows little variation at the finest grid levels. Overall, the FUN3D results compare well with the structured-grid code CFL3D. The FUN3D downwash study and Reynolds number study results compare well with the range of results shown in the workshop presentations.

Third International Workshop on Squeezed States and Uncertainty Relations

NASA Technical Reports Server (NTRS)

Han, D. (Editor); Kim, Y. S. (Editor); Rubin, Morton H. (Editor); Shih, Yan-Hua (Editor); Zachary, Woodford W. (Editor)

1994-01-01

The purpose of these workshops is to bring together an international selection of scientists to discuss the latest developments in Squeezed States in various branches of physics, and in the understanding of the foundations of quantum mechanics. At the third workshop, special attention was given to the influence that quantum optics is having on our understanding of quantum measurement theory. The fourth meeting in this series will be held in the People's Republic of China.

Introducing sensitive issues and self-care strategies to first year midwifery students.

PubMed

Cummins, Allison M; Wight, Raechel; Watts, Nicole; Catling, Christine

2018-06-01

first year midwifery students learn early in semester about situations in midwifery where a high level of emotion is expressed, such as taking a sexual history, being faced with the body image changes of pregnancy and working with women in the extreme pain of labour. Commencing students usually have not had exposure to the realities of studying and working in midwifery, and often have an idealised view of midwifery that may lead to attrition from the course. We aimed to equip students with personal and professional tools to discuss sensitive issues in midwifery and promote self-care through the development of two workshops. The first workshop focussed on sensitive issues in midwifery and the second on self-care strategies. quantitative and qualitative data were collected pre and post workshops using a survey. the workshops were developed at one university in New South Wales, Australia. Beginning first year midwifery students MEASUREMENTS: feeling more comfortable, confident and knowledgeable was measured using a paired t-test from the responses on a pre and post workshop survey. Content analysis was performed on the qualitative survey responses. there were significant increases in the students feeling more comfortable to discuss sensitive issues in midwifery following the first workshop. They found meeting new people, respecting opinions, normalizing confronting topics to be valuable and useful. The second workshop found significant differences in being more confident and knowledgeable to access and try new self-care strategies in both their personal and professional life. Students discussed learning to be more mindful in order to prepare for stressful situations. They became aware of their feeling and thoughts when under stress and said they would practice techniques including meditation. the workshops assisted the students to develop peer support, self-care strategies and coping mechanisms when faced with the intimate and sometimes confronting nature of midwifery practice. Through embedding these first year workshops early in the degree we hope to address attrition rates and facilitate the students' to become the compassionate, caring, woman-centred midwives that they envisioned. the workshops have the potential for replication in other universities to support and nurture beginning midwifery students. Copyright © 2018 Elsevier Ltd. All rights reserved.

Recovery and creative practices in people with severe mental illness: evaluating well-being and social inclusion.

PubMed

Saavedra, Javier; Pérez, Elvira; Crawford, Paul; Arias, Samuel

2018-04-01

This mixed (quantitative-qualitative) study evaluates the impact of an artistic workshop on a group of people with severe mental illness (SMI). This study focuses on the impact of creative practices on well-being and social inclusion outcomes. After participating in a creative workshop, 31 people diagnosed with a SMI completed pre/post-intervention measures, namely, the Warwick-Edinburgh Mental Well-Being Scale and the Social Inclusion questionnaire. It was applied in two-way repeated measures analysis of variance. The statistic Wilcoxon and Kruskal-Wallis were applied for non-parametric data to measure pre/post-test effects and workshop experience effects, respectively. In addition to quantitative measures, one observer participated in each workshop that ran in parallel in order to deepen and triangulate quantitative outcomes. The qualitative and quantitative results show that social inclusion improved in a significant way with an important size effect. Psychological wellbeing increased significantly with a low size effect. In accordance with these results, creative practices with people diagnosed with SMI are recommended. In order to increase the impact of these interventions, it is recommended to utilize public space away from clinical environments and to include people without SMI in creative activities together with SMI patients. Implications for Rehabilitation: Creative practices can significantly improve social inclusions and well-being in people with severe mental illness. Participating in creative workshops helps to elaborate personal meanings and promote recovery. Creative practices in mental health services can challenge professional roles and institutional practices. Participation of people with and without severe mental illness engaged together in artistic activities can decrease public stigma.

Measurement of the Microstructure of Ocean Surface Roughness

DTIC Science & Technology

1996-10-01

ptezmä. fa: paHki 19970303 135 DTIO QUALITY INSPECTED 1 PROCEEDINGS MICROSTRUCTURE SENSORS WORKSHOP 23-25 October 1996 Timberline Lodge , Mt. Hood...Sensors Workshop, 23-25 October 1996, Timberline Lodge , Mt. Hood, Oregon 12a. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release

Inquiry based Teacher Professional development from a multidisciplinary perspective: The NEOGEO Lake Erie Earth Science Field Trip

NASA Astrophysics Data System (ADS)

Ortiz, J. D.; Munro-Stasiuk, M. J.; Hart, B. I.; Mokaren, D. M.; Arnold, B.; Chermansky, J. V.; Vlack, Y. A.

2006-12-01

State and national educational standards stress the need to incorporate inquiry-based approaches into the K- 12 science curriculum. However, many teachers either lack training in these pedagogical techniques or science content mastery. Both of these are needed to confidently approach science teaching in the less structured framework associated with a real world exploration of the natural environment. To overcome these barriers to implementation, we have developed an intensive, field-based professional development workshop which explores the connections between the bedrock geology, glacial geomorphology, ecology, and geography of the Lake Erie Islands and the shore of its western basin. This workshop is part of a series of three workshops that form the professional development activities of our NSF funded Graduate Teaching Fellows in K-12 Education (GK-12) project, the Northeast Ohio Geoscience Education Outreach (NEOGEO) Program which seeks to improve the quality of Earth Science education at the middle and high school levels in Northeast Ohio. During the workshop students explored the ecology and geomorphology of a series of coastal wetlands, collecting instrumental data and field observations to evaluate water quality and the forces that created these surface features. Exceptional exposure of glacial scours and striations at Kelleys Island and along the Marblehead Peninsula allowed the participants to reconstruct evolving ice flow paths to see how recent geological history shaped the landscape. Finally, stratigraphic observations in a local quarry enabled the students to understand why the observed glacial features varied as a function of bedrock type. Response to the workshop was overwhelming positive with participants commenting positively on quality and quantity of the material presented and the manner in which inquiry based teaching was modeled. End of term projects which included the conceptualization of a teaching plan to incorporate the approaches learned during the workshop demonstrated effective transference of the knowledge. NEOGEO graduate fellows are available during the academic year to help the workshop participants implement their teaching plans.

Preclinical testing for aortic endovascular grafts: results of a Food and Drug Administration workshop.

PubMed

Abel, Dorothy B; Beebe, Hugh G; Dedashtian, Mark M; Morton, Michael C; Moynahan, Megan; Smith, Loius J; Weinberg, Steven L

2002-05-01

Since their introduction into clinical trials in the United States, endovascular aortic grafts have shown various types of problems. Although details of design and construction vary between different endovascular grafts and failure modes have had a variety of causes and clinical effects, the inability of preclinical testing to predict these failures remains common to all endovascular grafts. The need to improve preclinical testing in an attempt to reduce clinical device failures resulted in a Food and Drug Administration-sponsored workshop on endovascular graft preclinical testing held in Rockville, Md, from July 31 to August 1, 2001. FORMAT: The workshop was not designed as a consensus conference. Instead, it provided a forum for bringing stakeholders together to define problems and identify areas of agreement and disagreement. The workshop had 34 invited participants who represented device manufacturers, the medical community, the Food and Drug Administration, and testing facilities, and international attendance was more than 120 people. Discussion centered on: 1, defining the physiologic, anatomic, and morphologic characteristics of abdominal aortic aneurysms before and after endovascular graft treatment; 2, identifying the types of failures that have been observed clinically; and 3, determining which characteristics should be considered during preclinical modeling to better predict clinical performance. Attendees agreed to the need to better define and address anatomic characteristics and changes in the aneurysm after endograft treatment to optimize preclinical testing. Much discussion and little agreement occurred on the importance of flow-related forces on graft performance or the need or ability to define and model physiologic compliance during durability testing. The discussion and conclusions are summarized in this paper and are provided in detail at: http://www.fda.gov/cdrh/meetings/073101workshop.html. The workshop raised awareness of significant performance issues and the challenges of modeling the extremely variable and relatively undefined environment of abdominal aortic aneurysms. Through the interactive format of the workshop, participants identified areas of preclinical testing, device design, and aspects of the simulated environment that need further consideration.

Measuring MFT's Mental Health Literacy and Competence: The Effects of an On-Line Introductory Workshop on Eating Disorders

ERIC Educational Resources Information Center

Beck-Ellsworth, Danielle

2011-01-01

Purpose of study: The purpose of the validity study was to establish known-groups validity of the two measures used for the main study by comparing the responses of the Eating Disorder experts and non-experts. The purpose of the main study was to develop an on-line introductory workshop on eating disorders and investigate the levels of competency…

Measuring What Matters Workshop Report

DTIC Science & Technology

2015-01-14

Measuring What Matters Workshop Report Katie Stewart Julia Allen Michelle Valdez Lisa Young January 2015 TECHNICAL NOTE CMU/SEI-2015-TN...the approach using a simple objective: teaching a child to properly brush his/her teeth. Next, we demonstrate the approach using a cybersecurity...Ensure you child’s teeth are healthy. G1: Ensure your child has everything needed to brush his/her teeth. G2: Ensure your child is brushing his

Measuring What Matters Workshop Report

DTIC Science & Technology

2015-01-01

Measuring What Matters Workshop Report Katie Stewart Julia Allen Michelle Valdez Lisa Young January 2015 TECHNICAL NOTE CMU/SEI-2015-TN...the approach using a simple objective: teaching a child to properly brush his/her teeth. Next, we demonstrate the approach using a cybersecurity...Ensure you child’s teeth are healthy. G1: Ensure your child has everything needed to brush his/her teeth. G2: Ensure your child is brushing his

Measurement Science for Prognostics and Health Management for Smart Manufacturing Systems: Key Findings from a Roadmapping Workshop

PubMed Central

Weiss, Brian A.; Vogl, Gregory; Helu, Moneer; Qiao, Guixiu; Pellegrino, Joan; Justiniano, Mauricio; Raghunathan, Anand

2017-01-01

The National Institute of Standards and Technology (NIST) hosted the Roadmapping Workshop – Measurement Science for Prognostics and Health Management for Smart Manufacturing Systems (PHM4SMS) in Fall 2014 to discuss the needs and priorities of stakeholders in the PHM4SMS technology area. The workshop brought together over 70 members of the PHM community. The attendees included representatives from small, medium, and large manufacturers; technology developers and integrators; academic researchers; government organizations; trade associations; and standards bodies. The attendees discussed the current and anticipated measurement science challenges to advance PHM methods and techniques for smart manufacturing systems; the associated research and development needed to implement condition monitoring, diagnostic, and prognostic technologies within manufacturing environments; and the priorities to meet the needs of PHM in manufacturing. This paper will summarize the key findings of this workshop, and present some of the critical measurement science challenges and corresponding roadmaps, i.e., suggested courses of action, to advance PHM for manufacturing. Milestones and targeted capabilities will be presented for each roadmap across three areas: PHM Manufacturing Process Techniques; PHM Performance Assessment; and PHM Infrastructure – Hardware, Software, and Integration. An analysis of these roadmaps and crosscutting themes seen across the breakout sessions is also discussed. PMID:28664163

Shallow water models as tool for tsunami current predictions in ports and harbors. Validation with Tohoku 2011 field data

NASA Astrophysics Data System (ADS)

Gonzalez Vida, J. M., Sr.; Macias Sanchez, J.; Castro, M. J.; Ortega, S.

2015-12-01

Model ability to compute and predict tsunami flow velocities is of importance in risk assessment and hazard mitigation. Substantial damage can be produced by high velocity flows, particularly in harbors and bays, even when the wave height is small. Besides, an accurate simulation of tsunami flow velocities and accelerations is fundamental for advancing in the study of tsunami sediment transport. These considerations made the National Tsunami Hazard Mitigation Program (NTHMP) proposing a benchmark exercise focused on modeling and simulating tsunami currents. Until recently, few direct measurements of tsunami velocities were available to compare and to validate model results. After Tohoku 2011 many current meters measurement were made, mainly in harbors and channels. In this work we present a part of the contribution made by the EDANYA group from the University of Malaga to the NTHMP workshop organized at Portland (USA), 9-10 of February 2015. We have selected three out of the five proposed benchmark problems. Two of them consist in real observed data from the Tohoku 2011 event, one at Hilo Habour (Hawaii) and the other at Tauranga Bay (New Zealand). The third one consists in laboratory experimental data for the inundation of Seaside City in Oregon. For this model validation the Tsunami-HySEA model, developed by EDANYA group, was used. The overall conclusion that we could extract from this validation exercise was that the Tsunami-HySEA model performed well in all benchmark problems proposed. The greater spatial variability in tsunami velocity than wave height makes it more difficult its precise numerical representation. The larger variability in velocities is likely a result of the behaviour of the flow as it is channelized and as it flows around bathymetric highs and structures. In the other hand wave height do not respond as strongly to chanelized flow as current velocity.

An official American thoracic society workshop report: developing performance measures from clinical practice guidelines.

PubMed

Kahn, Jeremy M; Gould, Michael K; Krishnan, Jerry A; Wilson, Kevin C; Au, David H; Cooke, Colin R; Douglas, Ivor S; Feemster, Laura C; Mularski, Richard A; Slatore, Christopher G; Wiener, Renda Soylemez

2014-05-01

Many health care performance measures are either not based on high-quality clinical evidence or not tightly linked to patient-centered outcomes, limiting their usefulness in quality improvement. In this report we summarize the proceedings of an American Thoracic Society workshop convened to address this problem by reviewing current approaches to performance measure development and creating a framework for developing high-quality performance measures by basing them directly on recommendations from well-constructed clinical practice guidelines. Workshop participants concluded that ideally performance measures addressing care processes should be linked to clinical practice guidelines that explicitly rate the quality of evidence and the strength of recommendations, such as the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) process. Under this framework, process-based performance measures would only be developed from strong recommendations based on high- or moderate-quality evidence. This approach would help ensure that clinical processes specified in performance measures are both of clear benefit to patients and supported by strong evidence. Although this approach may result in fewer performance measures, it would substantially increase the likelihood that quality-improvement programs based on these measures actually improve patient care.

Science for Managing Riverine Ecosystems: Actions for the USGS Identified in the Workshop "Analysis of Flow and Habitat for Instream Aquatic Communities"

USGS Publications Warehouse

Bencala, Kenneth E.; Hamilton, David B.; Petersen, James H.

2006-01-01

Federal and state agencies need improved scientific analysis to support riverine ecosystem management. The ability of the USGS to integrate geologic, hydrologic, chemical, geographic, and biological data into new tools and models provides unparalleled opportunities to translate the best riverine science into useful approaches and usable information to address issues faced by river managers. In addition to this capability to provide integrated science, the USGS has a long history of providing long-term and nationwide information about natural resources. The USGS is now in a position to advance its ability to provide the scientific support for the management of riverine ecosystems. To address this need, the USGS held a listening session in Fort Collins, Colorado in April 2006. Goals of the workshop were to: 1) learn about the key resource issues facing DOI, other Federal, and state resource management agencies; 2) discuss new approaches and information needs for addressing these issues; and 3) outline a strategy for the USGS role in supporting riverine ecosystem management. Workshop discussions focused on key components of a USGS strategy: Communications, Synthesis, and Research. The workshop identified 3 priority actions the USGS can initiate now to advance its capabilities to support integrated science for resource managers in partner government agencies and non-governmental organizations: 1) Synthesize the existing science of riverine ecosystem processes to produce broadly applicable conceptual models, 2) Enhance selected ongoing instream flow projects with complementary interdisciplinary studies, and 3) Design a long-term, watershed-scale research program that will substantively reinvent riverine ecosystem science. In addition, topical discussion groups on hydrology, geomorphology, aquatic habitat and populations, and socio-economic analysis and negotiation identified eleven important complementary actions required to advance the state of the science and to develop the tools for supporting decisions on riverine ecosystem management. These eleven actions lie within the continuum of Communications, Synthesis, and Research.

Understanding the Process; Financial Responsibilities of Governing Boards. User's Manual.

ERIC Educational Resources Information Center

Association of Governing Boards of Universities and Colleges, 1980

1980-01-01

A supplement to a slide presentation on financial responsibilities of governing boards, suitable for use at a trustee workshop, is presented. A flow of funds model which depicts the five major financial zones (acquisition, allocation, current fund, plant fund, and endowment and similar funds) is the visual devise used through the presentation.…

Second Magnetoplasmadynamic Thruster Workshop

NASA Technical Reports Server (NTRS)

1992-01-01

The meeting focused on progress made in establishing performance and lifetime expectations of magnetoplasmadynamic (MPD) thrusters as functions of power, propellant, and design; models for the plasma flow and electrode components; viability and transportability of quasi-steady thruster testing; engineering requirements for high power, long life thrusters; and facilities and their requirements for performance and life testing.

Correlations and Fluctuations in Strong Interactions:. a Selection of Topics

NASA Astrophysics Data System (ADS)

Bialas, A.

2003-09-01

Invited talk at the 10th Workshop on Multiparticle Production: Correlations and Fluctuations in QCD. It contains a short account of (i) Event-by-event fluctuations and their relations to "inclusive distributions; (ii) Fluctuations of the conserved charges" (iii) Coincidence probabilities and Renyi entropies, and (iv) HBT correlations in the presence of flow.

Intellectual Energy Flow: An Interdisciplinary Approach to Teacher Professional Development

ERIC Educational Resources Information Center

Vogel, Amber; Muth, Christine

2005-01-01

This article features the workshop titled Exploring New Environments, developed by the University of North Carolina at Chapel Hill's DESTINY Traveling Science Learning Program. Exploring New Environments is a teacher professional development model based on the idea that teachers are also learners who thrive when given the means and encouragement…

DOE workshop: Sedimentary systems, aqueous and organic geochemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-07-01

A DOE workshop on sedimentary systems, aqueous and organic geochemistry was held July 15-16, 1993 at Lawrence Berkeley Laboratory. Papers were organized into several sections: Fundamental Properties, containing papers on the thermodynamics of brines, minerals and aqueous electrolyte solutions; Geochemical Transport, covering 3-D imaging of drill core samples, hydrothermal geochemistry, chemical interactions in hydrocarbon reservoirs, fluid flow model application, among others; Rock-Water Interactions, with presentations on stable isotope systematics of fluid/rock interaction, fluid flow and petotectonic evolution, grain boundary transport, sulfur incorporation, tracers in geologic reservoirs, geothermal controls on oil-reservoir evolution, and mineral hydrolysis kinetics; Organic Geochemistry covered new methodsmore » for constraining time of hydrocarbon migration, kinetic models of petroleum formation, mudstones in burial diagenesis, compound-specific carbon isotope analysis of petroleums, stability of natural gas, sulfur in sedimentary organic matter, organic geochemistry of deep ocean sediments, direct speciation of metal by optical spectroscopies; and lastly, Sedimentary Systems, covering sequence stratigraphy, seismic reflectors and diagenetic changes in carbonates, geochemistry and origin of regional dolomites, and evidence of large comet or asteroid impacts at extinction boundaries.« less

Meeting Report: Measuring Endocrine-Sensitive Endpoints within the First Years of Life

PubMed Central

Arbuckle, Tye E.; Hauser, Russ; Swan, Shanna H.; Mao, Catherine S.; Longnecker, Matthew P.; Main, Katharina M.; Whyatt, Robin M.; Mendola, Pauline; Legrand, Melissa; Rovet, Joanne; Till, Christine; Wade, Mike; Jarrell, John; Matthews, Stephen; Van Vliet, Guy; Bornehag, Carl-Gustaf; Mieusset, Roger

2008-01-01

An international workshop titled “Assessing Endocrine-Related Endpoints within the First Years of Life” was held 30 April–1 May 2007, in Ottawa, Ontario, Canada. Representatives from a number of pregnancy cohort studies in North America and Europe presented options for measuring various endocrine-sensitive endpoints in early life and discussed issues related to performing and using those measures. The workshop focused on measuring reproductive tract developmental endpoints [e.g., anogenital distance (AGD)], endocrine status, and infant anthropometry. To the extent possible, workshop participants strove to develop or recommend standardized measurements that would allow comparisons and pooling of data across studies. The recommended outcomes include thigh fat fold, breast size, vaginal cytology, AGD, location of the testis, testicular size, and growth of the penis, with most of the discussion focusing on the genital exam. Although a number of outcome measures recommended during the genital exam have been associated with exposure to endocrine-disrupting chemicals, little is known about how predictive these effects are of later reproductive health or other chronic health conditions. PMID:18629319

Building Community Consensus for Earth Science Literacy Using an Online Workshop (Invited)

NASA Astrophysics Data System (ADS)

Wysession, M. E.; Tuddenham, P.; Taber, J.; Ladue, N.

2009-12-01

The Earth Science Literacy Principles, published in the spring of 2009, represented a community consensus about what all Americans should understand about Earth sciences. Central to its creation was a 2-week online workshop that involved participation by 350 Earth scientists and educators. The online workshop, hosted by The College of Exploration, was an excellent medium for incorporating the ideas and concerns of 350 people in near-real time. NSF tasked the Earth Science Literacy Initiative (ESLI) (www.earthscienceliteracy.org) with constructing a set of “Big Ideas” and “Supporting Concepts” that distilled the essential understandings of the GEO-EAR division of NSF. Because of the wide diversity of sub-fields involved (ranging from paleobiology to tectonics), finding a mechanism for incorporating many different views while retaining an organized structure was a challenge. The online workshop turned out to be ideal for this task. Though the 2-week asynchronous workshop was designed to replicate a 2-day in-person workshop, at the drawn-out pace of one hour of requested participation per day, in reality it was much more productive. Many aspects of an in-person workshop were replicated in the the online space. Plenary talks were presented in the main conference room via videos recorded just before or during the 2-week period. The workshop was structured with 150 invited participants and 200 observers. The participants had access to all of the rooms while the observers could see all rooms but could only chat in their own area, the Observation Café. Each breakout room had a moderator who attempted to guide discussion, including suggesting off-topic conversations be moved to the Earth Café. An organizing committee of about a dozen people teleconferenced daily, determining the goals or tasks for the participants for that day. This allowed for a high level of flexibility, with the workshop structure flowing in response to the results up to that point. The first week was dedicated to the selection of a finite set of Earth Science Big Ideas, and the second week focused on the supporting concepts that would align with them. Participants went to a variety of different breakout rooms to either dialogue or upload assignments. It was tremendously beneficial to have the text of the entire workshop fully recorded and instantly available, both during and after the workshop, and this text became the foundation for the published ELSI Principles. It would have been impossible to incorporate and organize the thoughts and ideas of 350 people in an efficient, organized, and affordable manner without the use of the online workshop.

The Heat is On! Confronting Climate Change in the Classroom

NASA Astrophysics Data System (ADS)

Bowman, R.; Atwood-Blaine, D.

2008-12-01

This paper discusses a professional development workshop for K-12 science teachers entitled "The Heat is On! Confronting Climate Change in the Classroom." This workshop was conducted by the Center for Remote Sensing of Ice Sheets (CReSIS), which has the primary goal to understand and predict the role of polar ice sheets in sea level change. The specific objectives of this summer workshop were two-fold; first, to address the need for advancement in science technology engineering and mathematics (STEM) education and second, to address the need for science teacher training in climate change science. Twenty-eight Kansas teachers completed four pre-workshop assignments online in Moodle and attended a one-week workshop. The workshop included lecture presentations by scientists (both face-to-face and via video-conference) and collaboration between teachers and scientists to create online inquiry-based lessons on the water budget, remote sensing, climate data, and glacial modeling. Follow-up opportunities are communicated via the CReSIS Teachers listserv to maintain and further develop the collegial connections and collaborations established during the workshop. Both qualitative and quantitative evaluation results indicate that this workshop was particularly effective in the following four areas: 1) creating meaningful connections between K-12 teachers and CReSIS scientists; 2) integrating distance-learning technologies to facilitate the social construction of knowledge; 3) increasing teachers' content understanding of climate change and its impacts on the cryosphere and global sea level; and 4) increasing teachers' self-efficacy beliefs about teaching climate science. Evaluation methods included formative content understanding assessments (via "clickers") during each scientist's presentation, a qualitative evaluation survey administered at the end of the workshop, and two quantitative evaluation instruments administered pre- and post- workshop. The first of these quantitative instruments measured teachers' efficacy beliefs about teaching climate science and the outcome expectancy they hold for student achievement. The second, a content test, measured the teachers' content knowledge of climate science and the cryosphere. Our results indicate that the teachers participating in the workshops showed significant increase in personal climate science teaching efficacy, outcome expectancy, and content knowledge of climate science, all at the p < 0.01 level. Interestingly, these results appear to be independent of each other. While one may think that changes in efficacy beliefs are caused by gains in content knowledge, our results show low correlation between these two factors.

Proceedings of a U.S. Geological Survey pressure-sensor Workshop, Denver, Colorado, July 28-31, 1992

USGS Publications Warehouse

Wilbourn, Sammy L.

1994-01-01

The U.S. Geological Survey (USGS) conducted a Pressure Sensor Workshop, oriented toward the measurement of stage in surface waters, in Denver, Colorado, July 28-31, 1992. Twenty attendees from the U.S. Geological Survey and the National Oceanic and Atmospheric Administration gave presentations concerning their experiences with the use of pressure sensors in hydrologic investigations. This report is a compilation of the abstracts of the presentations made at the workshop. Workshop participants concluded that each of the sensors evaluated by the U.S. Geological Survey has strengths and weaknesses. Personnel contemplating the use of pressure sensors discussed at this workshop should contact workshop attendees and consult with them about their experiences with those sensors. The attendees preferred to use stilling wells with float-operated water-level sensors as the primary means for monitoring water levels. However, pressure sensor systems were favored as replacements for mercury manometers and as alternatives to stilling wells at sites where stilling wells are not practical or cost effective.

Final Scientific EFNUDAT Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kappeler, Franz

2010-11-09

F. Kappeler speaks about EFNUDAT synergies in astrophysics in this second session of the Final Scientific EFNUDAT Workshop. The workshop was organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluation Cross section measurements Experimental techniques Uncertainties and covariances Fission properties Current and future facilities; International Advisory Committee: C. Barreau (CENBG, France) T. Belgya (IKI KFKI, Hungary) E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany) R. Nolte (PTB, Germany)S. Pomp (TSLmore » UU, Sweden);Workshop Organizing Committee: Enrico Chiaveri (Chairman) Marco Calviani Samuel Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Losito Vasilis Vlachoudis Workshop Assistant: Geraldine Jean.« less

The effect of tailoring a model HIV prevention program for local adolescent target audiences.

PubMed

Kennedy, M G; Mizuno, Y; Hoffman, R; Baume, C; Strand, J

2000-06-01

In five U.S. sites (Nashville, Tennessee; Newark, New Jersey; northern Virginia; Phoenix, Arizona; and Sacramento, California), HIV risk-reduction workshops were mounted as a part of the Prevention Marketing Initiative (PMI). In four of the five sites, the workshop curriculum was a version of Be Proud! Be Responsible! (Jemmott, Jemmott, & McCaffree, 1996) that had been tailored to fit the needs of local target audiences. This article describes the evaluation of the PMI workshops. Protective effects on several behavioral determinants and behavioral outcome measures were observed 1 month after the workshops. Based on the overall pattern of results, it was concluded that the PMI workshops reduced the likelihood of unprotected sex among participants. The intervention developed by Jemmott and colleagues appears to have retained its effectiveness after it was tailored to meet perceived local needs.

A Weekend Workshop on Double Stars for Students

NASA Astrophysics Data System (ADS)

Brewer, Mark; Estrada, Chris; Estrada, Reed; Gillette, Sean

2016-01-01

A weekend double star workshop was held by Vanguard Preparatory for selected eighth grade students with the purpose of introducing them to astrometric observational science. The students were selected based on an essay provided by their language arts class. Collaboration with local visiting astronomers was established to provide telescopes equipped with an astrometric eyepiece, observational supervision, and expertise. During the workshop students learned how to determine the scale constant of an astrometric eyepiece, and the procedure for measuring separations and position angles of double stars. The students compared their data to past measurements reported in the Washington Double Star Catalog. Three goals were set for the student's outcome: 1) observe, record, and report observations of double stars, 2) write a scientific paper for publication in the Journal of Double Star Observations, and 3) present a PowerPoint presentation to their peers. This paper chronicles the planning, preparation, funding, and execution required to complete a double star workshop at a public middle school.

Magnetic Suspension Technology Workshop

NASA Technical Reports Server (NTRS)

Keckler, Claude R. (Editor); Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

1993-01-01

In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided.

Steady state operation simulation of the Francis-99 turbine by means of advanced turbulence models

NASA Astrophysics Data System (ADS)

Gavrilov, A.; Dekterev, A.; Minakov, A.; Platonov, D.; Sentyabov, A.

2017-01-01

The paper presents numerical simulation of the flow in hydraulic turbine based on the experimental data of the II Francis-99 workshop. The calculation domain includes the wicket gate, runner and draft tube with rotating reference frame for the runner zone. Different turbulence models such as k-ω SST, ζ-f and RSM were considered. The calculations were performed by means of in-house CFD code SigmaFlow. The numerical simulation for part load, high load and best efficiency operation points were performed.

Final Scientific EFNUDAT Workshop

ScienceCinema

None

2018-05-23

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluation Cross section measurements Experimental techniques Uncertainties and covariances Fission properties Current and future facilities ; International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) ;Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco Calviani Samuel Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Losito Vasilis Vlachoudis;Workshop Assistant: Geraldine Jean

Final Scientific EFNUDAT Workshop

ScienceCinema

None

2018-06-20

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.eu. Topics of interest include: Data evaluation, Cross section measurements, Experimental techniques, Uncertainties and covariances, Fission properties, and Current and future facilities. International Advisory Committee: C. Barreau (CENBG, France), T. Belgya (IKI KFKI, Hungary), E. Gonzalez (CIEMAT, Spain), F. Gunsing (CEA, France), F.-J. Hambsch (IRMM, Belgium), A. Junghans (FZD, Germany), R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman), Marco Calviani, Samuel Andriamonje, Eric Berthoumieux, Carlos Guerrero, Roberto Losito, Vasilis Vlachoudis. Workshop Assistant: Geraldine Jean

Final Scientific EFNUDAT Workshop

ScienceCinema

Garbil, Roger

2018-04-16

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.eu. Topics of interest include: Data evaluation; Cross section measurements; Experimental techniques; Uncertainties and covariances; Fission properties; Current and future facilities. International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden). Workshop Organizing Committee: Enrico Chiaveri (Chairman); Marco Calviani; Samuel Andriamonje; Eric Berthoumieux; Carlos Guerrero; Roberto Losito; Vasilis Vlachoudis; Workshop Assistant: Geraldine Jean

Final Scientific EFNUDAT Workshop

ScienceCinema

Lantz, Mattias; Neudecker, Denise

2018-05-25

Part 5 of The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluation Cross section measurements Experimental techniques Uncertainties and covariances Fission properties Current and future facilities International Advisory Committee: C. Barreau (CENBG, France) T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain) F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium) A. Junghans (FZD, Germany) R. Nolte (PTB, Germany) S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco Calviani Samuel Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Losito Vasilis Vlachoudis Workshop Assistant: Geraldine Jean

Final Scientific EFNUDAT Workshop

ScienceCinema

Wilson, J.N.

2018-05-24

Part 7 of The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluation; Cross section measurements; Experimental techniques; Uncertainties and covariances; Fission properties; Current and future facilities;International Advisory Committee: C. Barreau (CENBG, France) T. Belgya (IKI KFKI, Hungary) E. Gonzalez (CIEMAT, Spain) F. Gunsing (CEA, France) F.-J. Hambsch (IRMM, Belgium) A. Junghans (FZD, Germany) R. Nolte (PTB, Germany) S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman) Marco Calviani Samuel Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Losito Vasilis Vlachoudis Workshop Assistant: Geraldine Jean.

Summary of the Topical Workshop on Top Quark Differential Distributions 2014

NASA Astrophysics Data System (ADS)

Czakon, Michal; Mitov, Alexander; Rojo, Juan

2016-01-01

We summarize the Topical Workshop on Top Quark Differential Distributions 2014, which took place in Cannes immediately before the annual Top2014 conference. The workshop was motivated by the availability of top quark differential distributions at next-to-next-to-leading order and the forthcoming Large Hadron Collider (LHC) 13 TeV data. The main goal of the workshop was to explore the impact of improved calculations of top quark production on precision LHC measurements, PDF determinations and searches for physics beyond the Standard Model, as well as finding ways in which the high precision data from ATLAS, CMS and LHCb can be used to further refine theoretical predictions for top production.

Photovoltaic Performance and Reliability Workshop summary

NASA Astrophysics Data System (ADS)

Kroposki, Benjamin

1997-02-01

The objective of the Photovoltaic Performance and Reliability Workshop was to provide a forum where the entire photovoltaic (PV) community (manufacturers, researchers, system designers, and customers) could get together and discuss technical issues relating to PV. The workshop included presentations from twenty-five speakers and had more than one hundred attendees. This workshop also included several open sessions in which the audience and speakers could discuss technical subjects in depth. Several major topics were discussed including: PV characterization and measurements, service lifetimes for PV devices, degradation and failure mechanisms for PV devices, standardization of testing procedures, AC module performance and reliability testing, inverter performance and reliability testing, standardization of utility interconnect requirements, experience from field deployed systems, and system certification.

Final Scientific EFNUDAT Workshop

ScienceCinema

None

2018-05-24

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.eu. Topics of interest include: Data evaluation; Cross section measurements; Experimental techniques; Uncertainties and covariances; Fission properties; Current and future facilities. International Advisory Committee: C. Barreau (CENBG, France) T. Belgya (IKI KFKI, Hungary) E. Gonzalez (CIEMAT, Spain) F. Gunsing (CEA, France) F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany) R. Nolte (PTB, Germany) S. Pomp (TSL UU, Sweden) & Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco Calviani Samuel Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Losito Vasilis Vlachoudis; Workshop Assistant: Geraldine Jean

Final Technical Report for DE-SC0008098 [The Seventh International Workshop on the CKM Unitarity Triangle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwartz, Alan

2014-12-02

The Seventh International Workshop on the CKM Unitarity Triangle (http://ckm2012.uc.edu/) was held at the University of Cincinnati September 28-October 2, 2012. This workshop series is one of the leading meetings in the field of quark flavor physics. The Cincinnati workshop provided a venue for theorists and experimentalists to discuss the latest results and to develop new ideas for improved analyses. The most recent measurements from current experiments as well as the status of future experiments were discussed. On the theoretical side, progress in lattice QCD and other calculational techniques that allow more precise determinations of CKM matrix elements were presented.

Effect of rater training on reliability and accuracy of mini-CEX scores: a randomized, controlled trial.

PubMed

Cook, David A; Dupras, Denise M; Beckman, Thomas J; Thomas, Kris G; Pankratz, V Shane

2009-01-01

Mini-CEX scores assess resident competence. Rater training might improve mini-CEX score interrater reliability, but evidence is lacking. Evaluate a rater training workshop using interrater reliability and accuracy. Randomized trial (immediate versus delayed workshop) and single-group pre/post study (randomized groups combined). Academic medical center. Fifty-two internal medicine clinic preceptors (31 randomized and 21 additional workshop attendees). The workshop included rater error training, performance dimension training, behavioral observation training, and frame of reference training using lecture, video, and facilitated discussion. Delayed group received no intervention until after posttest. Mini-CEX ratings at baseline (just before workshop for workshop group), and four weeks later using videotaped resident-patient encounters; mini-CEX ratings of live resident-patient encounters one year preceding and one year following the workshop; rater confidence using mini-CEX. Among 31 randomized participants, interrater reliabilities in the delayed group (baseline intraclass correlation coefficient [ICC] 0.43, follow-up 0.53) and workshop group (baseline 0.40, follow-up 0.43) were not significantly different (p = 0.19). Mean ratings were similar at baseline (delayed 4.9 [95% confidence interval 4.6-5.2], workshop 4.8 [4.5-5.1]) and follow-up (delayed 5.4 [5.0-5.7], workshop 5.3 [5.0-5.6]; p = 0.88 for interaction). For the entire cohort, rater confidence (1 = not confident, 6 = very confident) improved from mean (SD) 3.8 (1.4) to 4.4 (1.0), p = 0.018. Interrater reliability for ratings of live encounters (entire cohort) was higher after the workshop (ICC 0.34) than before (ICC 0.18) but the standard error of measurement was similar for both periods. Rater training did not improve interrater reliability or accuracy of mini-CEX scores. clinicaltrials.gov identifier NCT00667940

Advancing climate literacy in Idaho K-12 schools using STEM education approaches, open source electronics, and Maker culture as vehicles for teacher training

NASA Astrophysics Data System (ADS)

Flores, A. N.; Gelb, L.; Watson, K. A.; Steimke, A.; Chang, C.; Busche, C.; Breidenbach, J.

2016-12-01

A climate literate citizenry is essential to the long-term success of climate change adaptation and to enhancing resilience of communities to climate change impacts. In support of a National Science Foundation CAREER award, we developed a teacher training workshop on a project that engages students in creating functioning, low-cost weather stations using open source electronics. The workshop aims to improve climate literacy among K-12 students while providing an authentic opportunity to acquire and hone STEM skills. Each station measures temperature, humidity, barometric pressure, light level, soil moisture, and precipitation occurrence. Our day-long workshop focuses on three elements: (1) providing context on the scientific importance of climate observation, (2) equipping teachers with technical skills needed to assemble and use a station from provided components, and (3) highlighting relevant educational standards met by the weather station activities. The workshop was attended by twelve 4th-9th grade teachers from southwest Idaho, all of whom teach at rural and/or Title I schools. Attendees reported having minimal or no previous experience with open source electronics, but all were able to effectively use their weather station with less than two hours of hands-on training. In written and oral post-workshop reflections teachers expressed a strong desire to integrate these activities into classrooms, but also revealed barriers associated with rigid curricular constraints and risk-averse administrators. Continued evolution of the workshop will focus on: (1) extending the duration and exploratory depth of the workshop, (2) refining pre- and post-assessments and performing longitudinal monitoring of teacher participants to measure short- and long-term efficacy of the workshop, and (3) partnering with colleagues to engage school district administrators in dialog on how to integrate authentic activities like this one into K-12 curriculum.

Low-Cost Air Quality Monitoring Tools: From Research to Practice (A Workshop Summary)

EPA Science Inventory

In May 2017, a two-day workshop was held in Los Angeles (California, U.S.A.) to gather practitioners who work with low-cost sensors used to make air quality measurements. The community of practice included individuals from academia, industry, non-profit groups, community-based or...

Multi-band gap and new solar cell options workshop

NASA Technical Reports Server (NTRS)

Hutchby, J.; Timmons, M.; Olson, J. M.

1993-01-01

Discussions of the multi-band gap (MBG) and new solar cell options workshop are presented. Topics discussed include: greater than 2 terminal cells; radiation damage preventing development of MBG cells for space; lattice matching; measurement of true performance; future of II-VI materials in MBG devices; and quaternaries.

NGAM webinar materials for talk by C. Serest on May 2012 Market Technology Symposium, fenceline monitoring session

EPA Science Inventory

This talk supports the NGAM workshop and webinar seires and prepares for NGAM 2 The Next Generation Air Monitoring (NGAM) webinar and workshop series captures the revolution in air pollution measurement science enabled by rapid advances in sensors, communication...

Workshop on Cosmogenic Nuclides

NASA Technical Reports Server (NTRS)

Reedy, R. C. (Editor); Englert, P. (Editor)

1986-01-01

Abstracts of papers presented at the Workshop on Cosmogenic Nuclides are compiled. The major topic areas covered include: new techniques for measuring nuclides such as tandem accelerator and resonance mass spectrometry; solar modulation of cosmic rays; pre-irradiation histories of extraterrestrial materials; terrestrial studies; simulations and cross sections; nuclide production rate calculations; and meteoritic nuclides.

Handbook of Classroom and Workshop Metric Activity Stations.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield.

The objectives of this handbook are to assist K-8 classroom teachers in launching an activity-oriented metric program that provides learning experiences in the measurement strands of linear, mass, and temperature, and to assist metric coordinators in planning metric awareness workshops for teachers, parents, and various community organizations.…

Electronic Packaging for Space Applications Workshop 1999

NASA Technical Reports Server (NTRS)

Sandor, Mike; Agarwal, Shri; Villegas, Enrique

1999-01-01

This paper presents viewgraphs on the Commercial Off-The-Shelf (COTS) Program. The topics include: 1) Advocacy for COTS; 2) MARS01 Program/Requirements; 3) MARS01 COTS Screening Flow; 4) Test Results-Electrical, C-Sam, Burn-In; 5) Value Added Analysis (Risk Reduction); 6) Value Added Analysis (Cost); 7) Impact of COTS ++ Screening and 8) Summary.

CFD validation needs for advanced concepts at Northrop Corporation

NASA Technical Reports Server (NTRS)

George, Michael W.

1987-01-01

Information is given in viewgraph form on the Computational Fluid Dynamics (CFD) Workshop held July 14 - 16, 1987. Topics covered include the philosophy of CFD validation, current validation efforts, the wing-body-tail Euler code, F-20 Euler simulated oil flow, and Euler Navier-Stokes code validation for 2D and 3D nozzle afterbody applications.

Airspace Technology Demonstration 3 (ATD-3): Applied Traffic Flow Management Project Overview

NASA Technical Reports Server (NTRS)

Gong, Chester

2016-01-01

ATD-3 Project Overview for 3rd Joint Workshop for KAIA-KARI - NASA ATM Research Collaboration. This presentation gives a high level description of the ATD-3 project and related technologies. These technologies include Multi-Flight Common Routes (MFCR), Traffic Aware Strategic Aircrew Requests (TASAR) and Dynamic Routes for Arrivals in Weather (DRAW).

Characterization and use of new monoclonal antibodies to CD11c,CD14, and CD163 to analyze the phenotypic complexity of ruminantmonocyte subsets

USDA-ARS?s Scientific Manuscript database

The sequencing of the bovine genome and development of mass spectrometry, in conjunction with flow cytometry (FC), have afforded an opportunity to complete the characterization of the specificity of monoclonal antibodies (mAbs), only partially characterized during previous international workshops fo...

NASA Office of Aeronautics and Space Technology Summer Workshop. Volume 9: Entry technology panel

NASA Technical Reports Server (NTRS)

1975-01-01

An advanced space transportation system heavy lift orbiter, hypersonic atmospheric entry missions, development of an emergency astronaut life boat, and basic research in boundary layer transition are among the topics discussed. Emphasis is placed on the need for space testing and for better mathematical models describing the flow fields around complex structures.

Turbulence Modeling Workshop

NASA Technical Reports Server (NTRS)

Rubinstein, R. (Editor); Rumsey, C. L. (Editor); Salas, M. D. (Editor); Thomas, J. L. (Editor); Bushnell, Dennis M. (Technical Monitor)

2001-01-01

Advances in turbulence modeling are needed in order to calculate high Reynolds number flows near the onset of separation and beyond. To this end, the participants in this workshop made the following recommendations. (1) A national/international database and standards for turbulence modeling assessment should be established. Existing experimental data sets should be reviewed and categorized. Advantage should be taken of other efforts already under-way, such as that of the European Research Community on Flow, Turbulence, and Combustion (ERCOFTAC) consortium. Carefully selected "unit" experiments will be needed, as well as advances in instrumentation, to fill the gaps in existing datasets. A high priority should be given to document existing turbulence model capabilities in a standard form, including numerical implementation issues such as grid quality and resolution. (2) NASA should support long-term research on Algebraic Stress Models and Reynolds Stress Models. The emphasis should be placed on improving the length-scale equation, since it is the least understood and is a key component of two-equation and higher models. Second priority should be given to the development of improved near-wall models. Direct Numerical Simulations (DNS) and Large Eddy Simulations (LES) would provide valuable guidance in developing and validating new Reynolds-averaged Navier-Stokes (RANS) models. Although not the focus of this workshop, DNS, LES, and hybrid methods currently represent viable approaches for analysis on a limited basis. Therefore, although computer limitations require the use of RANS methods for realistic configurations at high Reynolds number in the foreseeable future, a balanced effort in turbulence modeling development, validation, and implementation should include these approaches as well.

Reaching Out to Problem Anger: Assessing the Effectiveness of One-Day Cognitive Behavioural Workshops in a Community Setting in the UK.

PubMed

Illman, Nathan A; Brown, June S L

2016-09-01

Problem anger is frequently experienced by the general population and is known to cause significant problems for the individual and those around them. Whilst psychological treatments for problem anger are becoming increasingly established, this is still an under-researched area of mental health. We present an evaluation of a series of one-day anger management workshops for the public, targeting problem anger with a cognitive-behavioural approach. The main aim was to evaluate the effectiveness of a brief group-based anger intervention in terms of subjectively reported anger provocation levels and of depression and anxiety. Workshop participants completed a number of questionnaire measures at baseline before the intervention and at 1 month follow-up. The key questionnaires measured self-reported anger provocation levels (Novaco Anger Scale-Provocation Inventory), depressive symptomatology (PHQ-9) and symptoms of generalized anxiety (GAD-7). Change scores were analysed using repeated measures analyses. We found a significant reduction in anger provocation among workshop participants at 1 month follow-up (p = .03). Reductions in depression and anxiety were not statistically significant. We conclude that this brief psychoeducational anger intervention was effective in a small community sample and suggest future work should assess the effectiveness on similar brief interventions using a larger client group and examine outcomes on a broader range of anger measures.

Understanding the North Atlantic Oscillation and Its Effects in the Mediterranean

NASA Astrophysics Data System (ADS)

Trigo, Ricardo M.; Serrano, Sergio M. Vicente

2010-11-01

ESF-MedCLIVAR Workshop on Hydrological, Socioeconomic and Ecological Impacts of the North Atlantic Oscillation in the Mediterranean; Zaragoza, Spain, 24-27 May 2010; According to the latest Intergovernmental Panel on Climate Change report, the Mediterranean basin represents one of the most important hot spots of climate change in the world, with recent trends toward a hotter and drier climate being related to changes in atmospheric circulation patterns. Among these patterns the North Atlantic Oscillation (NAO) is the most important one and the only one that exerts a clear influence throughout the year, although with stronger intensity and extension during winter. In the framework of the European Science Foundation's Mediterranean Climate Variability and Predictability (MedCLIVAR) program (http://www.medclivar.eu/), a thematic workshop devoted to the hydrological, socioeconomic, and ecological impacts of the NAO in the Mediterranean area was held in Spain. The main objective of this 3-day workshop was to foster interaction in this increasingly interdisciplinary topic, in particular, among climatologists, hydrologists, geographers, agronomists, biologists, and other scientists. The workshop was attended by 62 participants from 15 different countries and included a mix of senior scientists and graduate students. The workshop was divided into five sessions focusing on (1) natural hazards, including droughts, severe precipitations, floods, heat waves, and cold spells; (2) vegetation activity and agriculture production; (3) natural ecosystems and environment, including forest dynamics, fisheries, dynamics of animal populations, and air quality; (4) geomorphology, including landslides and debris flows, erosivity mechanisms, and surface erosion processes; and (5) renewable energies production, including hydraulic, eolic, and solar.

Enhancing clinical skills education: University of Virginia School of Medicine's Clerkship Clinical Skills Workshop Program.

PubMed

Corbett, Eugene C; Payne, Nancy J; Bradley, Elizabeth B; Maughan, Karen L; Heald, Evan B; Wang, Xin Qun

2007-07-01

In 1993, the University of Virginia School of Medicine began a clinical skills workshop program in an effort to improve the preparation of all clerkship students to participate in clinical care. This program involved the teaching of selected basic clinical skills by interested faculty to small groups of third-year medical students. Over the past 14 years, the number of workshops has increased from 11 to 31, and they now involve clerkship faculty from family medicine, internal medicine, and pediatrics. Workshops include a variety of common skills from the communication, physical examination, and clinical test and procedure domains such as pediatric phone triage, shoulder examination, ECG interpretation, and suturing. Workshop sessions allow students to practice skills on each other, with standardized patients, or with models, with the goal of improving competence and confidence in the performance of basic clinical skills. Students receive direct feedback from faculty on their skill performance. The style and content of these workshops are guided by an explicit set of educational criteria.A formal evaluation process ensures that faculty receive regular feedback from student evaluation comments so that adherence to workshop criteria is continuously reinforced. Student evaluations confirm that these workshops meet their skill-learning needs. Preliminary outcome measures suggest that workshop teaching can be linked to student assessment data and may improve students' skill performance. This program represents a work-in-progress toward the goal of providing a more comprehensive and developmental clinical skills curriculum in the school of medicine.

Art-making in a family medicine clerkship: how does it affect medical student empathy?

PubMed

Potash, Jordan S; Chen, Julie Y; Lam, Cindy L K; Chau, Vivian T W

2014-11-28

To provide patient-centred holistic care, doctors must possess good interpersonal and empathic skills. Medical schools traditionally adopt a skills-based approach to such training but creative engagement with the arts has also been effective. A novel arts-based approach may help medical students develop empathic understanding of patients and thus contribute to medical students' transformative process into compassionate doctors. This study aimed to evaluate the impact of an arts-making workshop on medical student empathy. This was a mixed-method quantitative-qualitative study. In the 2011-12 academic year, all 161 third year medical students at the University of Hong Kong were randomly allocated into either an arts-making workshop or a problem-solving workshop during the Family Medicine clerkship according to a centrally-set timetable. Students in the arts-making workshop wrote a poem, created artwork and completed a reflective essay while students in the conventional workshop problem-solved clinical cases and wrote a case commentary. All students who agreed to participate in the study completed a measure of empathy for medical students, the Jefferson Scale of Empathy (JSE) (student version), at the start and end of the clerkship. Quantitative data analysis: Paired t-test and repeated measures ANOVA was used to compare the change within and between groups respectively. Qualitative data analysis: Two researchers independently chose representational narratives based on criteria adapted from art therapy. The final 20 works were agreed upon by consensus and thematically analysed using a grounded theory approach. The level of empathy declined in both groups over time, but with no statistically significant differences between groups. For JSE items relating to emotional influence on medical decision making, participants in the arts-making workshop changed more than those in the problem-solving workshop. From the qualitative data, students perceived benefits in arts-making, and gained understanding in relation to self, patients, pain and suffering, and the role of the doctor. Though quantitative findings showed little difference in empathy between groups, arts-making workshop participants gained empathic understanding in four different thematic areas. This workshop also seemed to promote greater self-awareness which may help medical students recognize the potential for emotions to sway judgment. Future art workshops should focus on emotional awareness and regulation.

Final Scientific EFNUDAT Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garbil, Roger

2010-11-09

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.eu. Topics of interest include: Data evaluation; Cross section measurements; Experimental techniques; Uncertainties and covariances; Fission properties; Current and future facilities. International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden). Workshop Organizing Committee: Enrico Chiaveri (Chairman); Marco Calviani; Samuel Andriamonje; Eric Berthoumieux; Carlos Guerrero; Robertomore » Losito; Vasilis Vlachoudis; Workshop Assistant: Geraldine Jean« less

Final Scientific EFNUDAT Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, J.N.

2010-11-09

Part 7 of The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluation; Cross section measurements; Experimental techniques; Uncertainties and covariances; Fission properties; Current and future facilities;International Advisory Committee: C. Barreau (CENBG, France) T. Belgya (IKI KFKI, Hungary) E. Gonzalez (CIEMAT, Spain) F. Gunsing (CEA, France) F.-J. Hambsch (IRMM, Belgium) A. Junghans (FZD, Germany) R. Nolte (PTB, Germany) S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman) Marco Calvianimore » Samuel Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Losito Vasilis Vlachoudis Workshop Assistant: Geraldine Jean.« less

Final Scientific EFNUDAT Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lantz, Mattias; Neudecker, Denise

2010-11-09

Part 5 of The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluation Cross section measurements Experimental techniques Uncertainties and covariances Fission properties Current and future facilities International Advisory Committee: C. Barreau (CENBG, France) T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain) F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium) A. Junghans (FZD, Germany) R. Nolte (PTB, Germany) S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco Calviani Samuelmore » Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Losito Vasilis Vlachoudis Workshop Assistant: Geraldine Jean« less

Final Scientific EFNUDAT Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vlachoudis, Vasilis

2010-11-09

Part 8. The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.eu Topics of interest include: Data evaluation Cross section measurements Experimental techniques Uncertainties and covariances Fission properties Current and future facilities International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary) E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France) F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany) R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco Calviani Samuel Andriamonje Ericmore » Berthoumieux Carlos Guerrero Roberto LositoVasilis Vlachoudis Workshop Assistant: Geraldine Jean« less

Final Scientific EFNUDAT Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-11-09

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.eu. Topics of interest include: Data evaluation; Cross section measurements; Experimental techniques; Uncertainties and covariances; Fission properties; Current and future facilities. International Advisory Committee: C. Barreau (CENBG, France) T. Belgya (IKI KFKI, Hungary) E. Gonzalez (CIEMAT, Spain) F. Gunsing (CEA, France) F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany) R. Nolte (PTB, Germany) S. Pomp (TSL UU, Sweden) & Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco Calviani Samuelmore » Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Losito Vasilis Vlachoudis; Workshop Assistant: Geraldine Jean« less

Final Scientific EFNUDAT Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-11-09

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive. EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluation Cross section measurements Experimental techniques Uncertainties and covariances Fission properties Current and future facilities ; International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) ;Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco Calviani Samuel Andriamonje Eric Berthoumieux Carlos Guerrero Roberto Lositomore » Vasilis Vlachoudis;Workshop Assistant: Geraldine Jean« less

Final Scientific EFNUDAT Workshop

ScienceCinema

None

2017-12-09

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluationCross section measurementsExperimental techniquesUncertainties and covariancesFission propertiesCurrent and future facilities  International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco CalvianiSamuel AndriamonjeEric BerthoumieuxCarlos GuerreroRoberto LositoVasilis Vlachoudis Workshop Assistant: Géraldine Jean

Breakthrough Propulsion Physics Workshop Preliminary Results

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1997-01-01

In August, 1997, a NASA workshop was held to assess the prospects emerging from physics that might lead to creating the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, attaining the maximum transit speeds physically possible, and breakthrough methods of energy production to power such devices. Because these propulsion goals are presumably far from fruition, a special emphasis was to identify affordable, near-term, and credible research that could make measurable progress toward these propulsion goals. Experiments and theories were discussed regarding the coupling of gravity and electromagnetism, vacuum fluctuation energy, warp drives and wormholes, and superluminal quantum tunneling. Preliminary results of this workshop are presented, along with the status of the Breakthrough Propulsion Physics program that conducted this workshop.

Performance of Reynolds Averaged Navier-Stokes Models in Predicting Separated Flows: Study of the Hump Flow Model Problem

NASA Technical Reports Server (NTRS)

Cappelli, Daniele; Mansour, Nagi N.

2012-01-01

Separation can be seen in most aerodynamic flows, but accurate prediction of separated flows is still a challenging problem for computational fluid dynamics (CFD) tools. The behavior of several Reynolds Averaged Navier-Stokes (RANS) models in predicting the separated ow over a wall-mounted hump is studied. The strengths and weaknesses of the most popular RANS models (Spalart-Allmaras, k-epsilon, k-omega, k-omega-SST) are evaluated using the open source software OpenFOAM. The hump ow modeled in this work has been documented in the 2004 CFD Validation Workshop on Synthetic Jets and Turbulent Separation Control. Only the baseline case is treated; the slot flow control cases are not considered in this paper. Particular attention is given to predicting the size of the recirculation bubble, the position of the reattachment point, and the velocity profiles downstream of the hump.

Uncertainty and instream flow standards

USGS Publications Warehouse

Castleberry, D.; Cech, J.; Erman, D.; Hankin, D.; Healey, M.; Kondolf, M.; Mengel, M.; Mohr, M.; Moyle, P.; Nielsen, Jennifer L.; Speed, T.; Williams, J.

1996-01-01

Several years ago, Science published an important essay (Ludwig et al. 1993) on the need to confront the scientific uncertainty associated with managing natural resources. The essay did not discuss instream flow standards explicitly, but its arguments apply. At an April 1995 workshop in Davis, California, all 12 participants agreed that currently no scientifically defensible method exists for defining the instream flows needed to protect particular species of fish or aquatic ecosystems (Williams, in press). We also agreed that acknowledging this fact is an essential step in dealing rationally and effectively with the problem.Practical necessity and the protection of fishery resources require that new instream flow standards be established and that existing standards be revised. However, if standards cannot be defined scientifically, how can this be done? We join others in recommending the approach of adaptive management. Applied to instream flow standards, this approach involves at least three elements.

Extended Abstracts. The U.S. Workshop on the Physics and Chemistry of Mercury Cadium Telluride and Novel IR Detector Materials, Held in San Francisco, California on October 2-4, 1990

DTIC Science & Technology

1990-10-01

WORKSHOP COORDINATOR J . Morreale Palisades Institute for Research Services, Inc. WORKSHOP SPONSORS CECOM Center for NV&EO Office of Naval Technology Air...LPE HgCdTe ON SAPPHIRE ................... 33 E.R. Blazejewski, S. Johnston, J.S. Chen, J . Bajaj, G. Williams and L. Bubulac, Rockwell Science Center...ACCEPTOR DENSITIES IN P-TYPE Hgl-xCdxTe BY THERMOELECTRIC MEASUREMENTS ................................... . ........ 63 J . Baars, D. Brink and J

Workshop on the Thermophysical Properties of Molten Materials

NASA Technical Reports Server (NTRS)

1993-01-01

The role of accurate thermophysical property data in the process design and modeling of solidification processes was the subject of a workshop held on 22-23 Oct. 1992 in Cleveland, Ohio. The workshop was divided into three sequential sessions dealing with (1) industrial needs and priorities for thermophysical data, (2) experimental capabilities for measuring the necessary data, and (3) theoretical capabilities for predicting the necessary data. In addition, a 2-hour panel discussion of the salient issues was featured as well as a 2-hour caucus that assessed priorities and identified action plans.

DPW-VI Results Using FUN3D with Focus on k-kL-MEAH2015 (k-kL) Turbulence Model

NASA Technical Reports Server (NTRS)

Abdol-Hamid, K. S.; Carlson, Jan-Renee; Rumsey, Christopher L.; Lee-Rausch, Elizabeth M.; Park, Michael A.

2017-01-01

The Common Research Model wing-body configuration is investigated with the k-kL-MEAH2015 turbulence model implemented in FUN3D. This includes results presented at the Sixth Drag Prediction Workshop and additional results generated after the workshop with a nonlinear Quadratic Constitutive Relation (QCR) variant of the same turbulence model. The workshop provided grids are used, and a uniform grid refinement study is performed at the design condition. A large variation between results with and without a reconstruction limiter is exhibited on "medium" grid sizes, indicating that the medium grid size is too coarse for drawing conclusions in comparison with experiment. This variation is reduced with grid refinement. At a fixed angle of attack near design conditions, the QCR variant yielded decreased lift and drag compared with the linear eddy-viscosity model by an amount that was approximately constant with grid refinement. The k-kL-MEAH2015 turbulence model produced wing root junction flow behavior consistent with wind tunnel observations.

Overview of the Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Chwalowski, Pawel; Florance, Jennifer P.; Wieseman, Carol D.; Schuster, David M.; Perry, Raleigh B.

2013-01-01

The Aeroelastic Prediction Workshop brought together an international community of computational fluid dynamicists as a step in defining the state of the art in computational aeroelasticity. This workshop's technical focus was prediction of unsteady pressure distributions resulting from forced motion, benchmarking the results first using unforced system data. The most challenging aspects of the physics were identified as capturing oscillatory shock behavior, dynamic shock-induced separated flow and tunnel wall boundary layer influences. The majority of the participants used unsteady Reynolds-averaged Navier Stokes codes. These codes were exercised at transonic Mach numbers for three configurations and comparisons were made with existing experimental data. Substantial variations were observed among the computational solutions as well as differences relative to the experimental data. Contributing issues to these differences include wall effects and wall modeling, non-standardized convergence criteria, inclusion of static aeroelastic deflection, methodology for oscillatory solutions, post-processing methods. Contributing issues pertaining principally to the experimental data sets include the position of the model relative to the tunnel wall, splitter plate size, wind tunnel expansion slot configuration, spacing and location of pressure instrumentation, and data processing methods.

Status of Photovoltaic Calibration and Measurement Standards

NASA Technical Reports Server (NTRS)

Baraona, Cosmo; Bailey, Sheila; Curtis, Henry; Brinker, David; Jenkins, Phillip; Scheiman, David

2001-01-01

The 7th International Workshop on Space Solar Cell Calibration and Measurement was held on September 25-27, 2000 in Girdwood, Alaska. Representatives from eight countries discussed international standards for single and multijunction solar cell measurement and calibration methods, round robin intercomparisons, and irradiation test methods for space solar cells. Progress toward adoption of an ISO standard on single junction cells was made. Agreement was reached to begin work on new standards for multijunction cells and irradiation testing. Progress on present single junction round robin measurements was discussed and future multijunction round robins were planned. The next workshop will be held in Germany in October 2001.

In-depth Analysis of Pattern of Occupational Injuries and Utilization of Safety Measures among Workers of Railway Wagon Repair Workshop in Jhansi (U.P.).

PubMed

Gupta, Shubhanshu; Malhotra, Anil K; Verma, Santosh K; Yadav, Rashmi

2017-01-01

Occupational injuries constitute a global health challenge, yet they receive comparatively modest scientific attention. Pattern of occupational injuries and its safety precautions among wagon repair workers is an important health issue, especially in developing countries like India. To assess the pattern of occupational injuries and utilization of safety measures among railway wagon repair workshop workers in Jhansi (U.P.). Railway wagon repair workshop urban area, Jhansi (U.P). Occupation-based cross-sectional study. A cross-sectional study was conducted among 309 workers of railway workshop in Jhansi (U.P.) who were all injured during the study period of 1 year from July 2015 to June 2016. Baseline characteristics, pattern of occupational injuries, safety measures, and their availability to and utilization by the participants were assessed using a pretested structured questionnaire. Data obtained were collected and analyzed statistically by simple proportions and Chi-square test. The majority of studied workers aged between 38 and 47 years ( n = 93, 30.6%) followed by 28-37 years ( n = 79, 26%). Among the pattern of occupational injuries, laceration (28.7%) was most common followed by abrasion/scratch (21%). Safety shoes and hat were utilized 100% by all workers. Many of them had more than 5 years of experience ( n = 237, 78%). Age group, education level, and utilization of safety measures were significantly associated with pattern of occupational injuries in univariate analysis ( P < 0.05). Occupational injuries are high and utilization of safety measures is low among workers on railway wagon repair workshop, which highlights the importance of strengthening safety regulatory services toward this group of workers. Younger age group workers show a significant association with open wounds and surface wounds. As the education level of workers increases, the incidence of injuries decreases. Apart from shoes, hat, and gloves, regular utilization of other personal protective equipment was not seen.

Proceedings of the Second Noncontact Temperature Measurement Workshop

NASA Technical Reports Server (NTRS)

Hale, Robert R. (Editor)

1989-01-01

The state of the art in noncontact temperature measurement (NCTM) technology was reviewed and the NCTM requirements of microgravity materials processing community identified. The workshop included technical presentations and discussions which ranged from research on advanced concepts for temperature measurement to laboratory research and development regarding measurement principles and state-of-the-art engineering practices for NCTM methodology in commercial and industrial applications. Technical presentations were made concerning: NCTM needs as perceived by several NASA centers, recent ground-based NCT, research and development of industry, NASA, academia, and selected national laboratories, work-in-progress communication, and technical issues of the implementation of temperature measurement in the space environment to facilitate future U.S. materials science investigations.

Evaluation applications of instrument calibration research findings in psychology for very small samples

NASA Astrophysics Data System (ADS)

Fisher, W. P., Jr.; Petry, P.

2016-11-01

Many published research studies document item calibration invariance across samples using Rasch's probabilistic models for measurement. A new approach to outcomes evaluation for very small samples was employed for two workshop series focused on stress reduction and joyful living conducted for health system employees and caregivers since 2012. Rasch-calibrated self-report instruments measuring depression, anxiety and stress, and the joyful living effects of mindfulness behaviors were identified in peer-reviewed journal articles. Items from one instrument were modified for use with a US population, other items were simplified, and some new items were written. Participants provided ratings of their depression, anxiety and stress, and the effects of their mindfulness behaviors before and after each workshop series. The numbers of participants providing both pre- and post-workshop data were low (16 and 14). Analysis of these small data sets produce results showing that, with some exceptions, the item hierarchies defining the constructs retained the same invariant profiles they had exhibited in the published research (correlations (not disattenuated) range from 0.85 to 0.96). In addition, comparisons of the pre- and post-workshop measures for the three constructs showed substantively and statistically significant changes. Implications for program evaluation comparisons, quality improvement efforts, and the organization of communications concerning outcomes in clinical fields are explored.

Workshop summary: connecting social and environmental factors to measure and track environmental health disparities.

PubMed

Payne-Sturges, Devon; Gee, Gilbert C; Crowder, Kirstin; Hurley, Bradford J; Lee, Charles; Morello-Frosch, Rachel; Rosenbaum, Arlene; Schulz, Amy; Wells, Charles; Woodruff, Tracey; Zenick, Hal

2006-10-01

On May 24-25, 2005 in Ann Arbor, Michigan, the US Environmental Protection Agency, the National Institute of Environmental Health Sciences, and the University of Michigan sponsored a technical workshop on the topic of connecting social and environmental factors to measure and track environmental health disparities. The workshop was designed to develop a transdisciplinary scientific foundation for exploring the conceptual issues, data needs, and policy applications associated with social and environmental factors used to measure and track racial, ethnic, and class disparities in environmental health. Papers, presentations, and discussions focused on the use of multilevel analysis to study environmental health disparities, the development of an organizing framework for evaluating health disparities, the development of indicators, and the generation of community-based participatory approaches for indicator development and use. Group exercises were conducted to identify preliminary lists of priority health outcomes and potential indicators and to discuss policy implications and next steps. Three critical issues that stem from the workshop were: (a) stronger funding support is needed for community-based participatory research in environmental health disparities, (b) race/ethnicity and socioeconomic position need to be included in environmental health surveillance and research, and (c) models to elucidate the interrelations between social, physical, and built environments should continue to be developed and empirically tested.

Improving quality management systems of laboratories in developing countries: an innovative training approach to accelerate laboratory accreditation.

PubMed

Yao, Katy; McKinney, Barbara; Murphy, Anna; Rotz, Phil; Wafula, Winnie; Sendagire, Hakim; Okui, Scolastica; Nkengasong, John N

2010-09-01

The Strengthening Laboratory Management Toward Accreditation (SLMTA) program was developed to promote immediate, measurable improvement in laboratories of developing countries. The laboratory management framework, a tool that prescribes managerial job tasks, forms the basis of the hands-on, activity-based curriculum. SLMTA is implemented through multiple workshops with intervening site visits to support improvement projects. To evaluate the effectiveness of SLMTA, the laboratory accreditation checklist was developed and subsequently adopted by the World Health Organization Regional Office for Africa (WHO AFRO). The SLMTA program and the implementation model were validated through a pilot in Uganda. SLMTA yielded observable, measurable results in the laboratories and improved patient flow and turnaround time in a laboratory simulation. The laboratory staff members were empowered to improve their own laboratories by using existing resources, communicate with clinicians and hospital administrators, and advocate for system strengthening. The SLMTA program supports laboratories by improving management and building preparedness for accreditation.

Honors Workshop for Middle School Science Teachers. Final Report.

ERIC Educational Resources Information Center

Meisner, Gerald W.; Lee, Ernest W.

The Honors Workshop for Middle School Science Teachers was designed to address teachers' conceptual understanding of basic scientific principles, student misconceptions and how to deal with them, and observation and measurement techniques. For 4 weeks in summer and on 6 Saturdays during 2 academic years, 30 leaders among science teachers from the…

Second Workshop on Spacecraft Glow

NASA Technical Reports Server (NTRS)

Waite, J. H., Jr. (Editor); Moorehead, T. W. (Editor)

1985-01-01

Various aspects of space glow were considered. Results of a workshop held on May 6 to 7, 1985, at the Space Science Laboratory of NASA/Marshall Space Flight Center, Huntsville, Alabama are presented. The topics of discussion are divided as follows: (1) in situ observations; (2) theoretical calculations; (3) laboratory measurements; and (4) future experiments.

Public Policy, Science, and Environmental Risk. Brookings Dialogues on Public Policy.

ERIC Educational Resources Information Center

Panem, Sandra, Ed.

This workshop explored the complex issues involved in scientific measurement of environmental risk. Specific purposes were to articulate policy issues that concern the use of scientific data in environmental risk assessment and to contribute to the dialogue from which better policy might emerge. Viewpoints of workshop participants from the…

Proceedings of Workshop on Methodology for Evaluating the Effectiveness of Transit Crime Reduction Measures in Automated Guideway Transit Systems

DOT National Transportation Integrated Search

1977-07-01

The workshop focused on current methods of assessing the effectiveness of crime and vandalism reduction methods that are used in conventional urban mass transit systems, and on how they might be applied to new AGT systems. Conventional as well as nov...

Proceedings from a Workshop on Ecological Carrying Capacity of Salmonids in the Columbia River Basin : Measure 7.1A of the Northwest Power Planning Council`s 1994 Fish and Wildlife Program : Report 3 of 4, Final Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Gary E.; Neitzel, D.A.; Mavros, William V.

1996-05-01

This report contains the proceedings of a workshop held during 1995 in Portland, Oregon. The objective of the workshop was to assemble a group of experts that could help us define carrying capacity for Columbia River Basin salmonids. The workshop was one activity designed to answer the questions asked in Measure 7.1A of the Council`s Fish and Wildlife Program. Based, in part, on the information we learned during the workshop we concluded that the approach inherent in 7.1A will not increase understanding of ecology, carrying capacity, or limiting factors that influence salmon under current conditions. Measure 7.1A requires a definitionmore » of carrying capacity and a list of determinants (limiting factors) of capacity. The implication or inference then follows that by asking what we know and do not know about the determinants will lead to research that increases our understanding of what is limiting salmon survival. It is then assumed that research results will point to management actions that can remove or repair the limiting factors. Most ecologists and fisheries scientists that have studied carrying capacity clearly conclude that this approach is an oversimplification of complex ecological processes. To pursue the capacity parameter, that is, a single number or set of numbers that quantify how many salmon the basin or any part of the basin can support, is meaningless by itself and will not provide useful information.« less

Global stratospheric change: Requirements for a Very-High-Altitude Aircraft for Atmospheric Research

NASA Technical Reports Server (NTRS)

1989-01-01

The workshop on Requirements for a Very-High-Altitude Aircraft for Atmospheric Research, sponsored by NASA Ames Research Center, was held July 15 to 16, 1989, at Truckee, CA. The workshop had two purposes: to assess the scientific justification for a new aircraft that will support stratospheric research beyond the altitudes accessible to the NASA ER-2; and to determine the aircraft characteristics (e.g., ceiling altitude, payload accommodations, range, flight duration, operational capabilities) required to perform the stratospheric research referred to in the justification. To accomplish these purposes, the workshop brought together a cross-section of stratospheric scientists with several aircraft design and operations experts. The stratospheric scientists included theoreticians as well as experimenters with experience in remote and in situ measurements from satellites, rockets, balloons, aircraft, and the ground. Discussions of required aircraft characteristics focused on the needs of stratospheric research. It was recognized that an aircraft optimal for stratospheric science would also be useful for other applications, including remote measurements of Earth's surface. A brief description of these other applications was given at the workshop.

Muon lifetime measurement in Chiapas and the Escaramujo project

DOE PAGES

Sanchez, Luis Rodolfo Perez; Izraelevitch, Federico

2017-07-05

Escaramujo is a project with the goal of promote scientific development and integration regarding science for Latin America. It consists of a series of Laboratories and Workshops for High Energy Physics, astroparticle and instrumentation, given by Federico Izraelevitch. Escaramujo has been conduced at several institutions in Latin America. In this work, the moun mean lifetime measurements performed during the workshop held in Chiapas are presented. Furthermore, the results are compared with the corresponding value reported by the Particle Data Group (PDG).

Muon lifetime measurement in Chiapas and the Escaramujo project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanchez, Luis Rodolfo Perez; Izraelevitch, Federico

Escaramujo is a project with the goal of promote scientific development and integration regarding science for Latin America. It consists of a series of Laboratories and Workshops for High Energy Physics, astroparticle and instrumentation, given by Federico Izraelevitch. Escaramujo has been conduced at several institutions in Latin America. In this work, the moun mean lifetime measurements performed during the workshop held in Chiapas are presented. Furthermore, the results are compared with the corresponding value reported by the Particle Data Group (PDG).

The atmospheric effects of stratospheric aircraft. Report of the 1992 Models and Measurements Workshop. Volume 2: Comparisons with global atmospheric measurements

NASA Technical Reports Server (NTRS)

Prather, Michael J. (Editor); Remsberg, Ellis E. (Editor)

1993-01-01

This Workshop on Stratospheric Models and Measurements (M&M) marks a significant expansion in the history of model intercomparisons. It provides a foundation for establishing the credibility of stratospheric models used in environmental assessments of chlorofluorocarbons, aircraft emissions, and climate-chemistry interactions. The core of the M&M comparisons involves the selection of observations of the current stratosphere (i.e., within the last 15 years): these data are believed to be accurate and representative of certain aspects of stratospheric chemistry and dynamics that the models should be able to simulate.

Proceedings of the workshop on Compilation of (Symbolic) Languages for Parallel Computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foster, I.; Tick, E.

1991-11-01

This report comprises the abstracts and papers for the talks presented at the Workshop on Compilation of (Symbolic) Languages for Parallel Computers, held October 31--November 1, 1991, in San Diego. These unreferred contributions were provided by the participants for the purpose of this workshop; many of them will be published elsewhere in peer-reviewed conferences and publications. Our goal is planning this workshop was to bring together researchers from different disciplines with common problems in compilation. In particular, we wished to encourage interaction between researchers working in compilation of symbolic languages and those working on compilation of conventional, imperative languages. Themore » fundamental problems facing researchers interested in compilation of logic, functional, and procedural programming languages for parallel computers are essentially the same. However, differences in the basic programming paradigms have led to different communities emphasizing different species of the parallel compilation problem. For example, parallel logic and functional languages provide dataflow-like formalisms in which control dependencies are unimportant. Hence, a major focus of research in compilation has been on techniques that try to infer when sequential control flow can safely be imposed. Granularity analysis for scheduling is a related problem. The single- assignment property leads to a need for analysis of memory use in order to detect opportunities for reuse. Much of the work in each of these areas relies on the use of abstract interpretation techniques.« less

Workshop to transfer VELMA watershed model results to ...

EPA Pesticide Factsheets

An EPA Western Ecology Division (WED) watershed modeling team has been working with the Snoqualmie Tribe Environmental and Natural Resources Department to develop VELMA watershed model simulations of the effects of historical and future restoration and land use practices on streamflow, stream temperature, and other habitat characteristics affecting threatened salmon populations in the 100 square mile Tolt River watershed in Washington state. To date, the WED group has fully calibrated the watershed model to simulate Tolt River flows with a high degree of accuracy under current and historical conditions and practices, and is in the process of simulating long-term responses to specific watershed restoration practices conducted by the Snoqualmie Tribe and partners. On July 20-21 WED Researchers Bob McKane, Allen Brookes and ORISE Fellow Jonathan Halama will be attending a workshop at the Tolt River site in Carnation, WA, to present and discuss modeling results with the Snoqualmie Tribe and other Tolt River watershed stakeholders and land managers, including the Washington Departments of Ecology and Natural Resources, U.S. Forest Service, City of Seattle, King County, and representatives of the Northwest Indian Fisheries Commission. The workshop is being co-organized by the Snoqualmie Tribe, EPA Region 10 and WED. The purpose of this 2-day workshop is two-fold. First, on Day 1, the modeling team will perform its second site visit to the watershed, this time focus

Report on the Aseismic Slip, Tremor, and Earthquakes Workshop

USGS Publications Warehouse

Gomberg, Joan; Roeloffs, Evelyn; Trehu, Anne; Dragert, Herb; Meertens, Charles

2008-01-01

This report summarizes the discussions and information presented during the workshop on Aseismic Slip, Tremor, and Earthquakes. Workshop goals included improving coordination among those involved in conducting research related to these phenomena, assessing the implications for earthquake hazard assessment, and identifying ways to capitalize on the education and outreach opportunities presented by these phenomena. Research activities of focus included making, disseminating, and analyzing relevant measurements; the relationships among tremor, aseismic or 'slow-slip', and earthquakes; and discovering the underlying causative physical processes. More than 52 participants contributed to the workshop, held February 25-28, 2008 in Sidney, British Columbia. The workshop was sponsored by the U.S. Geological Survey, the National Science Foundation?s Earthscope Program and UNAVCO Consortium, and the Geological Survey of Canada. This report has five parts. In the first part, we integrate the information exchanged at the workshop as it relates to advancing our understanding of earthquake generation and hazard. In the second part, we summarize the ideas and concerns discussed in workshop working groups on Opportunities for Education and Outreach, Data and Instrumentation, User and Public Needs, and Research Coordination. The third part presents summaries of the oral presentations. The oral presentations are grouped as they were at the workshop in the categories of phenomenology, underlying physical processes, and implications for earthquake hazards. The fourth part contains the meeting program and the fifth part lists the workshop participants. References noted in parentheses refer to the authors of presentations made at the workshop, and published references are noted in square brackets and listed in the Reference section. Appendix A contains abstracts of all participant presentations and posters, which also have been posted online, along with presentations and author contact information at http://www.earthscope.org/science/cascadia.

Increasing clinicians' EBT exploration and preparation behavior in youth mental health services by changing organizational culture with ARC.

PubMed

Glisson, Charles; Williams, Nathaniel J; Hemmelgarn, Anthony; Proctor, Enola; Green, Philip

2016-01-01

Clinician EBT exploration and preparation behavior is essential to the ongoing implementation of new EBTs. This study examined the effect of the ARC organizational intervention on clinician EBT exploration and preparation behavior and assessed the mediating role of organizational culture as a linking mechanism. Fourteen community mental health agencies that serve youth in a major Midwestern metropolis along with 475 clinicians who worked in those agencies, were randomly assigned to either the three-year ARC intervention or control condition. Organizational culture was assessed with the Organizational Social Context (OSC) measure at baseline and follow-up. EBT exploration and preparation behavior was measured as clinician participation in nine separate community EBT workshops held over a three-year period. There was 69 percent greater odds (OR = 1.69, p < .003) of clinicians in the ARC condition (versus control) attending each subsequent workshop. Workshop attendance in the control group remained under two percent and declined over three years while attendance in the ARC condition grew from 3.6 percent in the first workshop to 12 percent in the ninth and final workshop. Improvement in proficient organizational culture mediated the positive effect of the ARC intervention on clinicians' workshop attendance (a × b = .21; 95% CI:LL = .05, UL = .40). Organizational interventions that create proficient mental health agency cultures can increase clinician EBT exploration and preparation behavior that is essential to the ongoing implementation of new EBTs in community youth mental health settings. Copyright © 2015 Elsevier Ltd. All rights reserved.

Preoperative preparation workshop reduces postoperative maladaptive behavior in children.

PubMed

Hilly, Julie; Hörlin, Anne-Laure; Kinderf, Joelle; Ghez, Cecile; Menrath, Sabrina; Delivet, Honorine; Brasher, Christopher; Nivoche, Yves; Dahmani, Souhayl

2015-10-01

Postoperative maladaptive behaviors (POMBs) are common following pediatric anesthesia, and preoperative anxiety is associated with POMBs. A family-centered preoperative preparation workshop was instituted with the aim of reducing the incidence of POMB and preoperative anxiety, and the study was constructed to evaluate its effectiveness. A prospective cohort study was constructed, comparing patients who attended the workshop (workshop group) with patients who did not attend and who were matched for age and type of surgery (comparison group). Preoperative anxiety was measured using the mYPAS score, postoperative emergence agitation (EA) was measured using the PAED score, POMBs were assessed with the Post-Hospital Behavior Questionnaire (PHBQ) on postoperative day 7, and PACU morphine consumption and PACU length of stay were recorded. Statistical analysis was performed employing the X² test, the Fisher's exact test, and the Mann-Whitney test as appropriate. Data were expressed as median [minimum, maximum]. Fifty-six patients from 3 to 18 years of age were recruited. Twenty-seven patients in the workshop group were compared to 26 in the comparison group, after exclusions for missing data. Significant differences were demonstrated between groups for POMBs intensity (PHBQ score 2 [0; 9] vs 5 [0; 10], P = 0.008) and incidence (PHBQ score >6: 3.6% vs 35.7%, P = 0.003), and for mYPAS score (28 [23; 87] vs 37 [23;100], P = 0.015). No difference was found for EA, PACU morphine consumption, or PACU length of stay. The workshop appears to result in reduced preoperative anxiety and POMBs. © 2015 John Wiley & Sons Ltd.

Seeking the Tricorder: Report on Workshops on Advanced Technologies for Life Detection

NASA Astrophysics Data System (ADS)

Reiss-Bubenheim, D.; Boston, P. J.; Partridge, H.; Lindensmith, C.; Nadeau, J. L.

2017-12-01

There's great excitement about life prospects on icy fluid-containing moons orbiting our Solar System's gas giant planets, newly discovered planet candidates and continuing long-term interest in possible Mars life. The astrobiology/planetary research communities require advanced technologies to explore and study both Solar System bodies and exoplanets for evidence of life. The Tricorder Workshop, held at Ames Research Center May 19-20, 2017, explored technology topics focused on non-invasive or minimally invasive methods for life detection. The workshop goal was to tease out promising ideas for low TRL concepts for advanced life detection technologies that could be applied to the surface and near-subsurface of Mars and Ocean Worlds (such as Europa and Enceladus) dominated by icy terrain. The workshop technology focus centered on mid-to-far term instrument concepts or other enabling technologies (e.g. robotics, machine learning, etc.) primarily for landed missions, which could detect evidence of extant, extinct and/or "weird" life including the notion of "universal biosignatures". Emphasis was placed on simultaneous and serial sample measurements using a suite of instruments and technological approaches with planetary protection in mind. A follow-on workshop, held July 24 at Caltech, sought to develop a generic flowchart of in situ observations and measurements to provide sufficient information to determine if extant life is present in an environment. The process didn't require participant agreement as to definition of extant life, but instead developed agreement on necessary observations and instruments. The flowchart of measurements was designed to maximize the number of simultaneous observations on a single sample where possible, serializing where necessary, and finally dividing it into parts for the most destructive analyses at the end. Selected concepts from the workshops outlined in this poster provide those technology areas necessary to solicit and develop for future life detection exploration via fly-by missions, orbiters, and landers.

Including patients in core outcome set development: issues to consider based on three workshops with around 100 international delegates.

PubMed

Young, Bridget; Bagley, Heather

2016-01-01

This commentary article describes three interactive workshops that explored how patients can contribute to decisions about what outcomes are measured in clinical trials across the world. Outcomes like quality of life, side-effects and pain are used in trials to measure whether a treatment is effective. Here, we outline how research groups are increasingly coming together to develop 'core outcomes sets' for particular conditions. Core outcome sets are lists of agreed outcomes. Their use will help in identifying which treatments are effective by enabling people to compare the findings of different clinical trials in the same condition. Currently, it is often very difficult to make these comparisons because different studies often measure different outcomes. Delegates attending the workshops included patients, clinicians and researchers. They discussed ways of making core outcome set development more meaningful and accessible for patients, and ensuring that they have a genuine say in the development process. This article summarises these discussions and concludes by identifying three distinctive challenges in securing patient input to core outcome set development: the process and objectives can seem far removed from the immediate concerns of patients, difficulties can arise in securing patient input on an international scale, and difficulties can also arise in bringing multiple stakeholder groups together to achieve consensus. While patient participation, involvement and engagement in core outcome set development can draw on lessons from other research areas, these distinctive challenges point to the need for distinctive solutions to enable meaningful patient input to core outcome set development. Background This article describes three workshops that explored how patients can contribute to decisions about what outcomes are measured in clinical trials. People need evidence about what treatments are best for particular health conditions. The strongest evidence comes from systematic reviews comparing outcomes across different studies of treatments for a particular condition. However, it is often difficult to do these comparisons because the different studies-even though they have all investigated the same condition-often measure different outcomes. To tackle this problem, research teams are increasingly coming together to develop core outcome sets (COS) for particular conditions or treatments. The goal is that across the world, all the research teams working on the same condition or treatment will then use the COS in their research. Main body We report on three interactive workshops that explored how patients and the public can contribute to decision making about what outcomes should be included in a COS. About 100 international delegates, including researchers, clinicians and patients, attended the workshops. The workshops were held in the United Kingdom, Italy and Canada as part of the COMET (Core Outcome Measures in Effectiveness Trials) Initiative annual meetings. Patients who had some experience as research advisors, collaborators, partners or co-ordinators facilitated the workshops together with a researcher. Notes made during each workshop informed the preparation of this article. Workshop discussion focussed on ways of making core outcome set development more meaningful and accessible for patients. Delegates wanted patients to have a genuine say, alongside other stakeholders, in what outcomes are included in COS. Delegates felt that key to ensuring this is recognising that patient participation in COS development alone is not enough, and that patients will also need to be involved in the design of COS development studies. Conclusion We conclude by pointing to some distinctive challenges in including patients in COS development. While the COS development community can draw on the lessons learnt from other research areas about patient participation, involvement and engagement, the distinctive challenges that arise in COS development point to the need for some distinctive solutions too.

Promoting instructional change in new faculty: An evaluation of the physics and astronomy new faculty workshop

NASA Astrophysics Data System (ADS)

Henderson, Charles

2008-02-01

An important finding of physics and astronomy education research (PAER) is that traditional, transmission-based instructional approaches are not effective in promoting meaningful student learning. Instead, PAER research suggests that physics and astronomy should be taught using more interactive instructional methods. These ways of teaching require significant changes in the way faculty think about teaching and learning and corresponding changes in their teaching behavior. Although the research base and corresponding pedagogies and strategies are well documented and widely available, widespread changes in physics and astronomy teaching at the college level has yet to occur. The Workshop for New Physics and Astronomy Faculty has been working to address this problem since 1996. This workshop, which is jointly administered by the American Association of Physics Teachers, the American Astronomical Society, and the American Physical Society, has attracted approximately 25% of all new physics and astronomy faculty each year to a four-day workshop designed to introduce new faculty to PAER-based instructional ideas and materials. This paper describes the impact of the Workshop as measured by surveys of Workshop participants and physics and astronomy department chairs. The results indicate that the Workshop is successful in meeting its goals and might be significantly contributing to the spread and acceptance of PAER-based instructional ideas and materials.

Integrating Scientists into Teacher Professional Development—Strategies for Success

NASA Astrophysics Data System (ADS)

Lynds, S. E.; Buhr, S. M.; Smith, L. K.

2010-12-01

Professional development workshops for science teachers can be greatly enhanced by scientist participation. Such workshops may promote a collegial community and mutual understanding between researchers and educators. The CIRES (Cooperative Institute for Research in Environmental Sciences) Education and Outreach (EO) group at the University of Colorado, Boulder, has over a decade of experience in successfully developing and hosting such events. Scientist participation in these workshops varies widely—from giving formal presentations to working one-on-one with educators in designing a research project. Researchers from CIRES, NOAA (National Oceanic and Atmospheric Administration), NSIDC (National Snow and Ice Data Center), and other Colorado agencies and institutions have participated in the workshops. In addition, graduate students in scientific research programs at the University of Colorado are frequently involved. Such workshops can be effective broader impacts components of scientific programs. One example of a long-running successful program was the Earthworks project (1998-2007), a one-week workshop for secondary science teachers from around the country. With the help of practicing geoscientists, participants working in teams designed and conducted a field-based interdisciplinary study. Attendees were so enthusiastic that the ongoing Listserv community (including both scientist and educators) is still active and engaged three years after the last workshop. In a more recent example, since 2009 CIRES EO has been hosting an annual week-long summer workshop as the COSEE (Centers for Ocean Science Education Excellence) West—Colorado Collaborative. The COSEE workshops have had a different theme each year. In 2010, the workshop explored the link between Arctic sea ice, the Greenland ice sheet, sea level, and global climate processes. Extensive evaluation efforts have been included in the design of each workshop and the evaluation results are used to improve subsequent workshops. To measure achievement of program goals, feedback surveys, interviews, and workshop observation are employed. Evaluation data have shown consistently throughout the years that both educators and scientists value the time spent with each other at these workshops. Scientists enjoy sharing their topic areas with motivated and energetic educators. Conversely, science teachers appreciate the opportunity to work directly with scientists and to hear about cutting-edge research being done. This paper will review the most successful strategies for including scientists in professional development workshops, from both the teachers’ and the scientists’ perspectives.

FOCIS goes south: advances in translational and clinical immunology.

PubMed

Kalergis, Alexis M; Anegon, Ignacio; González, Pablo A

2017-09-01

FOCIS goes South: Advances in Translational and Clinical Immunology was the first Federation of Clinical Immunology Societies (FOCIS) ( www.focisnet.org ) meeting held in Latin America (May 15-17, 2017, Santiago de Chile, Chile). The meeting was organized as a 3-day workshop and was fostered by the Millennium Institute on Immunology and Immunotherapy, a recently nominated FOCIS Center of Excellence. The workshop brought together FOCIS associates, such as members of the FOCIS Board of Directors, Directors of different Centers of Excellence, regional speakers and 350 attendees. The Meeting covered aspects of immune regulation and modulation, as well as immunotherapy in areas of autoimmunity, transplantation, cancer and infectious diseases, among others. The activity also had a full-day immunology course and a day-long flow cytometry course.

A class of solution-invariant transformations of cost functions for minimum cost flow phase unwrapping.

PubMed

Hubig, Michael; Suchandt, Steffen; Adam, Nico

2004-10-01

Phase unwrapping (PU) represents an important step in synthetic aperture radar interferometry (InSAR) and other interferometric applications. Among the different PU methods, the so called branch-cut approaches play an important role. In 1996 M. Costantini [Proceedings of the Fringe '96 Workshop ERS SAR Interferometry (European Space Agency, Munich, 1996), pp. 261-272] proposed to transform the problem of correctly placing branch cuts into a minimum cost flow (MCF) problem. The crucial point of this new approach is to generate cost functions that represent the a priori knowledge necessary for PU. Since cost functions are derived from measured data, they are random variables. This leads to the question of MCF solution stability: How much can the cost functions be varied without changing the cheapest flow that represents the correct branch cuts? This question is partially answered: The existence of a whole linear subspace in the space of cost functions is shown; this subspace contains all cost differences by which a cost function can be changed without changing the cost difference between any two flows that are discharging any residue configuration. These cost differences are called strictly stable cost differences. For quadrangular nonclosed networks (the most important type of MCF networks for interferometric purposes) a complete classification of strictly stable cost differences is presented. Further, the role of the well-known class of node potentials in the framework of strictly stable cost differences is investigated, and information on the vector-space structure representing the MCF environment is provided.

Evaluating Interactive Fatigue Management Workshops for Occupational Health Professionals in the United Kingdom

PubMed Central

Ali, Sheila; Chalder, Trudie; Madan, Ira

2014-01-01

Background Disabling fatigue is common in the working age population. It is essential that occupational health (OH) professionals are up-to-date with the management of fatigue in order to reduce the impact of fatigue on workplace productivity. Our aim was to evaluate the impact of one-day workshops on OH professionals' knowledge of fatigue and chronic fatigue syndrome (CFS), and their confidence in diagnosing and managing these in a working population. Methods Five interactive problem-based workshops were held in the United Kingdom. These workshops were developed and delivered by experts in the field. Questionnaires were self-administered immediately prior to, immediately after, and 4 months following each workshop. Questionnaires included measures of satisfaction, knowledge of fatigue and CFS, and confidence in diagnosing and managing fatigue. Open-ended questions were used to elicit feedback about the workshops. Results General knowledge of fatigue increased significantly after training (with a 25% increase in the median score). Participants showed significantly higher levels of confidence in diagnosing and managing CFS (with a 62.5% increase in the median score), and high scores were maintained 4 months after the workshops. OH physicians scored higher on knowledge and confidence than nurses. Similarly, thematic analysis revealed that participants had increased knowledge and confidence after attending the workshops. Conclusion Fatigue can lead to severe functional impairment with adverse workplace outcomes. One-day workshops can be effective in training OH professionals in how to diagnose and manage fatigue and CFS. Training may increase general knowledge of fatigue and confidence in fatigue management in an OH setting. PMID:25516811

Understanding the Flow Physics of Shock Boundary-Layer Interactions Using CFD and Numerical Analyses

NASA Astrophysics Data System (ADS)

Friedlander, David Joshua

Mixed compression inlets are common among supersonic propulsion systems. However they are susceptible to total pressure losses due to shock/boundary-layer interactions (SBLI's). Because of their importance, a workshop was held at the 48th American Institute of Aeronautics and Astronautics (AIAA) Aerospace Sciences Meeting in 2010 to gauge current computational fluid dynamics (CFD) tools abilities to predict SBLI's. One conclusion from the workshop was that the CFD consistently failed to agree with the experimental data. This thesis presents additional CFD and numerical analyses that were performed on one of the configurations presented at the workshop. The additional analyses focused on the University of Michigan's Mach 2.75 Glass Tunnel with a semi-spanning 7.75 degree wedge while exploring key physics pertinent to modeling SBLI's. These include thermodynamic and viscous boundary conditions as well as turbulence modeling. Most of the analyses were 3D CFD simulations using the OVERFLOW flow solver. However, a quasi-1D MATLAB code was developed to interface with the National Institute of Standards and Technology (NIST) Reference Fluid Thermodynamic and Transport Properties Database (REFPROP) code to explore perfect verses non-ideal air as this feature is not supported within OVERFLOW. Further, a grid resolution study was performed on the 3D 56 million grid point grid which was shown to be nearly grid independent. Because the experimental data was obtained via particle image velocimetry (PIV), a fundamental study pertaining to the effects of PIV on post-processing data was also explored. Results from the CFD simulations showed an improvement in agreement with experimental data with certain settings. This is especially true of the v velocity field within the streamwise data plane. Key contributions to the improvement include utilizing a laminar zone upstream of the wedge (the boundary-layer was considered transitional downstream of the nozzle throat) and the necessity of mimicking PIV particle lag for comparisons. It was also shown that the corner flow separations are highly sensitive to the turbulence model. However, the center flow region, where the experimental data was taken, was not as sensitive to the turbulence model. Results from the quasi-1D simulation showed that there was little difference between perfect and non-ideal air for the configuration presented.

Comparison of NTF Experimental Data with CFD Predictions from the Third AIAA CFD Drag Prediction Workshop

NASA Technical Reports Server (NTRS)

Vassberg, John C.; Tinoco, Edward N.; Mani, Mori; Levy, David; Zickuhr, Tom; Mavriplis, Dimitri J.; Wahls, Richard A.; Morrison, Joseph H.; Brodersen, Olaf P.; Eisfeld, Bernhard;

FUN3D Analyses in Support of the First Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Chwalowski, Pawel; Heeg, Jennifer; Wieseman, Carol D.; Florance, Jennifer P.

2013-01-01

This paper presents the computational aeroelastic results generated in support of the first Aeroelastic Prediction Workshop for the Benchmark Supercritical Wing (BSCW) and the HIgh REynolds Number AeroStructural Dynamics (HIRENASD) configurations and compares them to the experimental data. The computational results are obtained using FUN3D, an unstructured grid Reynolds-averaged Navier-Stokes solver developed at NASA Langley Research Center. The analysis results for both configurations include aerodynamic coefficients and surface pressures obtained for steady-state or static aeroelastic equilibrium (BSCW and HIRENASD, respectively) and for unsteady flow due to a pitching wing (BSCW) or modally-excited wing (HIRENASD). Frequency response functions of the pressure coefficients with respect to displacement are computed and compared with the experimental data. For the BSCW, the shock location is computed aft of the experimentally-located shock position. The pressure distribution upstream of this shock is in excellent agreement with the experimental data, but the pressure downstream of the shock in the separated flow region does not match as well. For HIRENASD, very good agreement between the numerical results and the experimental data is observed at the mid-span wing locations.

PREFACE: Special section featuring selected papers from the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors Special section featuring selected papers from the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors

NASA Astrophysics Data System (ADS)

Granados, Xavier; Sánchez, Àlvar; López-López, Josep

2012-10-01

The development of superconducting applications and superconducting engineering requires the support of consistent tools which can provide models for obtaining a good understanding of the behaviour of the systems and predict novel features. These models aim to compute the behaviour of the superconducting systems, design superconducting devices and systems, and understand and test the behavior of the superconducting parts. 50 years ago, in 1962, Charles Bean provided the superconducting community with a model efficient enough to allow the computation of the response of a superconductor to external magnetic fields and currents flowing through in an understandable way: the so called critical-state model. Since then, in addition to the pioneering critical-state approach, other tools have been devised for designing operative superconducting systems, allowing integration of the superconducting design in nearly standard electromagnetic computer-aided design systems by modelling the superconducting parts with consideration of time-dependent processes. In April 2012, Barcelona hosted the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors (HTS), the third in a series of workshops started in Lausanne in 2010 and followed by Cambridge in 2011. The workshop reflected the state-of-the-art and the new initiatives of HTS modelling, considering mathematical, physical and technological aspects within a wide and interdisciplinary scope. Superconductor Science and Technology is now publishing a selection of papers from the workshop which have been selected for their high quality. The selection comprises seven papers covering mathematical, physical and technological topics which contribute to an improvement in the development of procedures, understanding of phenomena and development of applications. We hope that they provide a perspective on the relevance and growth that the modelling of HTS superconductors has achieved in the past 25 years.

Real-World Vehicle Emissions: A Summary of the 18th Coordinating Research Council On-Road Vehicle Emissions Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cadle, S. H.; Ayala, A.; Black, K. N.

2009-02-01

The Coordinating Research Council (CRC) convened its 18th On-Road Vehicle Emissions Workshop March 31-April 2, 2008, with 104 presentations describing the most recent mobile source-related emissions research. In this paper we summarize the presentations from researchers whose efforts are improving our understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed emission models and emissions inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles (with an emphasis in this workshop on particle emissions), effects of fuels on emissions, evaluation of in-use emission-control programs, and efforts to improve our capabilities in performingmore » on-board emissions measurements, as well as topics for future research.« less

GLOBE Hydrology Workshop SEIP program

NASA Technical Reports Server (NTRS)

2005-01-01

Matt Krigbaum (left), a teacher at Mitchell Elementary in Ann Arbor, Mich., pours water from the Pearl River into a turbidity tube to measure the river's light penetration. Krigbaum, along with Lois Williams, principal at Elizabeth Courville Elementary in Detroit, Mich.; and Carolyn Martin and Arlene Wittmer, teachers at Elizabeth Courville Elementary; conducted the experiment during a GLOBE (Global Learning and Observations to Benefit the Environment) hydrology workshop. GLOBE is a worldwide, hands-on science education program in which teachers can become certified to implement the program at their schools after taking hydrology, land cover/biology, atmosphere/climate and soil protocol workshops. Twelve teachers from across the country attended the recent weeklong GLOBE training at SSC, offered through its Educator Resource Center and the NASA Explorer Schools program. All workshops are free and offer continuing education units.

GLOBE Hydrology Workshop SEIP program

NASA Image and Video Library

2005-06-30

Matt Krigbaum (left), a teacher at Mitchell Elementary in Ann Arbor, Mich., pours water from the Pearl River into a turbidity tube to measure the river's light penetration. Krigbaum, along with Lois Williams, principal at Elizabeth Courville Elementary in Detroit, Mich.; and Carolyn Martin and Arlene Wittmer, teachers at Elizabeth Courville Elementary; conducted the experiment during a GLOBE (Global Learning and Observations to Benefit the Environment) hydrology workshop. GLOBE is a worldwide, hands-on science education program in which teachers can become certified to implement the program at their schools after taking hydrology, land cover/biology, atmosphere/climate and soil protocol workshops. Twelve teachers from across the country attended the recent weeklong GLOBE training at SSC, offered through its Educator Resource Center and the NASA Explorer Schools program. All workshops are free and offer continuing education units.

Clinical research in implant dentistry: study design, reporting and outcome measurements: consensus report of Working Group 2 of the VIII European Workshop on Periodontology.

PubMed

Tonetti, Maurizio; Palmer, Richard

2012-02-01

The objective of this working group was to assess and make specific recommendations to improve the quality of reporting of clinical research in implant dentistry and discuss ways to reach a consensus on choice of outcomes. Discussions were informed by three systematic reviews on quality of reporting of observational studies (case series, case-control and cohort) and experimental research (randomized clinical trials). An additional systematic review provided information on choice of outcomes and analytical methods. In addition, an open survey among all workshop participants was utilized to capture a consensus view on the limits of currently used survival and success-based outcomes as well as to identify domains that need to be captured by future outcome systems. The Workshop attempted to clarify the characteristics and the value in dental implant research of different study designs. In most areas, measurable quality improvements over time were identified. The Workshop recognized important aspects that require continued attention by clinical researchers, funding agencies and peer reviewers to decrease potential bias. With regard to choice of outcomes, the limitations of currently used systems were recognized. Three broad outcome domains that need to be captured by future research were identified: (i) patient reported outcome measures, (ii) peri-implant tissue health and (iii) performance of implant supported restorations. Peri-implant tissue health can be measured by marginal bone level changes and soft tissue inflammation and can be incorporated in time to event analyses. The Workshop recommended that collaboration between clinicians and epidemiologists/clinical trials specialists should be encouraged. Aspects of design aimed at limitation of potential bias should receive attention by clinical researchers, funding agencies and journal editors. Adherence to appropriate reporting guidelines such as STROBE and CONSORT are necessary standards. Research on outcome measure domains is an area of top priority and should urgently inform a proper process leading to a consensus on outcome measures in dental implant research. © 2012 John Wiley & Sons A/S.

NASA 2008 HyspIRI whitepaper and workshop report

USGS Publications Warehouse

,; Mars, John

2009-01-01

From October 21-23, 2008, NASA held a three-day workshop to consider the Hyperspectral Infrared Imager (HyspIRI) mission recommended for implementation by the 2007 report from the U.S. National Research Council Earth Science and Applications from Space: National Imperatives for the Next Decade and Beyond, also known as the Earth Science Decadal Survey. The open workshop provided a forum to present the initial observational requirements for the mission and assess its anticipated impact on scientific and operational applications as well as obtain feedback from the broader scientific community on the mission concept. The workshop participants concluded the HyspIRI mission would provide a significant new capability to study ecosystems and natural hazards at spatial scales relevant to human resource use. In addition, participants confirmed that the proposed instrument designs could meet the measurement requirements and be implemented through the use of current technology. The workshop participants, like the Decadal Survey itself, strongly endorsed the need for the HyspIRI mission and felt the mission, as defined, would accomplish the intended science.

Cotinine analytical workshop report: consideration of analytical methods for determining cotinine in human body fluids as a measure of passive exposure to tobacco smoke.

PubMed Central

Watts, R R; Langone, J J; Knight, G J; Lewtas, J

1990-01-01

A two-day technical workshop was convened November 10-11, 1986, to discuss analytical approaches for determining trace amounts of cotinine in human body fluids resulting from passive exposure to environmental tobacco smoke (ETS). The workshop, jointly sponsored by the U.S. Environmental Protection Agency and Centers for Disease Control, was attended by scientists with expertise in cotinine analytical methodology and/or conduct of human monitoring studies related to ETS. The workshop format included technical presentations, separate panel discussions on chromatography and immunoassay analytical approaches, and group discussions related to the quality assurance/quality control aspects of future monitoring programs. This report presents a consensus of opinion on general issues before the workshop panel participants and also a detailed comparison of several analytical approaches being used by the various represented laboratories. The salient features of the chromatography and immunoassay analytical methods are discussed separately. PMID:2190812

Proceedings of the Polar Processes on Mars Workshop

NASA Technical Reports Server (NTRS)

Haberle, Robert M.

1988-01-01

Included in this publication is a collection of abstracts from the NASA-sponsored workshop, Polar Processes on Mars, which was held at the Sunnyvale Hilton Hotel, Sunnyvale, California, on 12 to 13 May 1988. Support for the workshop came from NASA's Planetary Geology and Geophysics program managed by Dr. Jospeh Boyce. The workshop is one of a series identified by MECA (an acronym for Mars: Evolution of its Climate and Atmosphere) as being worthy of focused research, but one for which it was not possible to hold during the project's lifetime. Consequently, it was held after the project ended. The MECA project was part of the Mars Data Analysis program. The workshop consisted of four sessions: The Polar Caps, Dynamics/Atmospheric Processes, Polar Geology, and Future Measurements. To put things into perspective, each of the first three sessions began with a review. All sessions were scheduled to allow ample time for discussion. A brief review of each session is provided.

Developing the careers of clinician-educators in psychiatry.

PubMed

Bennett, Aurora J; Clardy, James A; Cargile, Christopher S; Thrush, Carol R

2007-01-01

This article describes initial efforts by the newly developed Clinician-Educator Section (CES) of the Association for Academic Psychiatry (AAP) to support the career advancement of academic faculty within psychiatry. The CES provided its first workshop at the 2005 AAP annual meeting, focusing on early career development and academic promotion. The CES obtained input from members regarding their vision for how this newly developed section could support their career development. Workshops were among the suggestions provided and therefore this article will describe the planning, implementation, and outcome measures of the initial workshop provided by the CES. The authors describe a summary of the workshop, descriptive statistics obtained from a needs assessment, and formal evaluation ratings of the workshop. Results indicate that this initial effort was a helpful professional development opportunity for academic psychiatrists. The AAP-led initiative described in this article is a positive first step in the field of academic psychiatry to leverage the valuable educational and facilitative role of a professional organization in promoting the career advancement of clinician-educators in psychiatry.

Workshop on Pion-Kaon Interactions (PKI2018) Mini-Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amaryan, M; Pal, Bilas

This volume is a short summary of talks given at the PKI2018 Workshop organized to discuss current status and future prospects of pi -K interactions. The precise data on pi K interaction will have a strong impact on strange meson spectroscopy and form factors that are important ingredients in the Dalitz plot analysis of a decays of heavy mesons as well as precision measurement of Vus matrix element and therefore on a test of unitarity in the first raw of the CKM matrix. The workshop has combined the efforts of experimentalists, Lattice QCD, and phenomenology communities. Experimental data relevant tomore » the topic of the workshop were presented from the broad range of different collaborations like CLAS, GlueX, COMPASS, BaBar, BELLE, BESIII, VEPP-2000, and LHCb. One of the main goals of this workshop was to outline a need for a new high intensity and high precision secondary KL beam facility at JLab produced with the 12 GeV electron beam of CEBAF accelerator.« less

CONCLUSIONS AND RECOMMENDATIONS OF THE EXPERT PANEL: TECHNICAL WORKSHOP ON HUMAN MILK SURVEILLANCE AND BIOMONITORING FOR ENVIRONMENTAL CHEMICALS IN THE UNITED STATES

EPA Science Inventory

The Technical Workshop focused on questions related to interpretation of information gathered from human milk biomonitoring studies. Biomonitoring can measure a person’s exposure to a chemical in his/her tissue. Human milk is a unique biological matrix for biomonitoring because i...

AmeriFlux: Measuring carbon, water and energy flux across the Americas.

Science.gov Websites

Sign In × Welcome Close POSTCARDS Register for the 2018 AmeriFlux Synthesis Workshop! US-UMB AmeriFlux tower, located at the University of Michigan Biological Station (UMBS) Decadal Synthesis Survey POSTCARDS Register for the 2018 AmeriFlux Synthesis Workshop! Apr 2 2018 Decadal Synthesis Survey: Insights

Workshop Summary: International Cooperative for Aerosol Prediction Workshop On Aerosol Forecast Verification

NASA Technical Reports Server (NTRS)

Benedetti, Angela; Reid, Jeffrey S.; Colarco, Peter R.

2011-01-01

The purpose of this workshop was to reinforce the working partnership between centers who are actively involved in global aerosol forecasting, and to discuss issues related to forecast verification. Participants included representatives from operational centers with global aerosol forecasting requirements, a panel of experts on Numerical Weather Prediction and Air Quality forecast verification, data providers, and several observers from the research community. The presentations centered on a review of current NWP and AQ practices with subsequent discussion focused on the challenges in defining appropriate verification measures for the next generation of aerosol forecast systems.

MFGA-IDT2 workshop: Astrophysical and geophysical fluid mechanics: the impact of data on turbulence theories

NASA Astrophysics Data System (ADS)

Schertzer, D.; Falgarone, E.

1 Facts about the Workshop This workshop was convened on November 13-15 1995 by E. Falgarone and D. Schertzer within the framework of the Groupe de Recherche Mecanique des Fluides Geophysiques et Astrophysiques (GdR MFGA, Research Group of Geophysical and Astrophysical Fluid Mechanics) of Centre National de la Recherche Scientifique (CNRS, (French) National Center for Scientific Research). This Research Group is chaired by A. Babiano and the meeting was held at Ecole Normale Superieure, Paris, by courtesy of its Director E. Guyon. More than sixty attendees participated to this workshop, they came from a large number of institutions and countries from Europe, Canada and USA. There were twenty-five oral presentations as well as a dozen posters. A copy of the corresponding book of abstracts can be requested to the conveners. The theme of this meeting is somewhat related to the series of Nonlinear Variability in Geophysics conferences (NVAG1, Montreal, Aug. 1986; NVAG2, Paris, June 1988; NVAG3, Cargese (Corsica), September, 1993), as well as seven consecutive annual sessions at EGS general assemblies and two consecutive spring AGU meeting sessions devoted to similar topics. One may note that NVAG3 was a joint American Geophysical Union Chapman and European Geophysical Society Richardson Memorial conference, the first topical conference jointly sponsored by the two organizations. The corresponding proceedings were published in a special NPG issue (Nonlinear Processes in Geophysics 1, 2/3, 1994). In comparison with these previous meetings, MFGA-IDT2 is at the same time specialized to fluid turbulence and its intermittency, and an extension to the fields of astrophysics. Let us add that Nonlinear Processes in Geophysics was readily chosen as the appropriate journal for publication of these proceedings since this journal was founded in order to develop interdisciplinary fundamental research and corresponding innovative nonlinear methodologies in Geophysics. It had an appropriate editorial structure, in particular a large number of editors covering a wide range of methodologies, expertises and schools. At least two of its sections (Scaling and Multifractals, Turbulence and Diffusion) were directly related to the topics of the workshop, in any case contributors were invited to choose their editor freely. 2 Goals of the Workshop The objective of this meeting was to enhance the confrontation between turbulence theories and empirical data from geophysics and astrophysics fluids with very high Reynolds numbers. The importance of these data seems to have often been underestimated for the evaluation of theories of fully developed turbulence, presumably due to the fact that turbulence does not appear as pure as in laboratory experiments. However, they have the great advantage of giving access not only to very high Reynolds numbers (e.g. 1012 for atmospheric data), but also to very large data sets. It was intended to: (i) provide an overview of the diversity of potentially available data, as well as the necessary theoretical and statistical developments for a better use of these data (e.g. treatment of anisotropy, role of processes which induce other nonlinearities such as thermal instability, effect of magnetic field and compressibility ... ), (ii) evaluate the means of discriminating between different theories (e.g. multifractal intermittency models) or to better appreciate the relevance of different notions (e.g. Self-Organized Criticality) or phenomenology (e.g. filaments, structures), (iii) emphasise the different obstacles, such as the ubiquity of catastrophic events, which could be overcome in the various concerned disciplines, thanks to theoretical advances achieved. 3 Outlines of the Workshop During the two days of the workshop, the series of presentations covered many manifestations of turbulence in geophysics, including: oceans, troposphere, stratosphere, very high atmosphere, solar wind, giant planets, interstellar clouds... up to the very large scale of the Universe. The presentations and the round table at the end of the workshop pointed out the following: - the necessity of this type of confrontation which makes intervene numerical simulations, laboratory experiments, phenomenology as well as a very large diversity of geophysical and astrophysical data, - presumably a relative need for new geophysical data, whereas there have been recent astrophysical experiments which yield interesting data and exciting questions; - the need to develop a closer intercomparison between various intermittency models (in particular Log-Poisson /Log Levy models). Two main questions were underlined, in particular during the round table: - the behaviour of the extremes of intermittency, in particular the question of divergence or convergence of the highest statistical moments (equivalently, do the probability distributions have algebraic or more rapid falloffs?); - the extension of scaling ranges; in other words do we need to divide geophysics and astrophysics in many small (nearly) isotropic subranges or is it sufficient to use anisotropic scaling notions over wider ranges? 4 The contributions in this special issue Recalling that some of the most useful insights into the nature of turbulence in fluids have come from observations of geophysical flows, Van Atta gives a review of the impacts of geophysical turbulence data into theories. His paper starts from Taylor's inference of the nearly isotropy of atmospheric turbulence and the corresponding elegant theoretical developments by von Karman of the theory of isotropic turbulence, up to underline the fact that the observed extremely large intermittency in geophysical turbulence also raised new fundamental questions for turbulence theory. The paper discusses the potential contribution to theoretical development from the available or currently being made geophysical turbulence measurements, as well as from some recent laboratory measurements and direct numerical simulations of stably stratified turbulent shear flows. Seuront et al. consider scaling and multiscaling properties of scalar fields (temperature and phytoplankton concentration) advected by oceanic turbulence in both Eulerian and Lagrangian frameworks. Despite the apparent complexity linked to a multifractal background, temperature and fluorescence (i.e. phytoplankton biomass surrogate) fields are expressed over a wide range of scale by only three universal multifractal parameters, H, α and C_l. On scales smaller than the characteristic scale of the ship, sampling is rather Eulerian. On larger scales, the drifting platform being advected by turbulent motions, sampling may be rather considered as Lagrangian. Observed Eulerian and Lagrangian universal multifractal properties of the physical and biological fields are discussed. Whereas theoretical models provide different scaling laws for fluid and MHD turbulent flows, no attempt has been done up to now to experimentally support evidence for these differences. Carbone et al. use measurements from the solar wind turbulence and from turbulence in ordinary fluid flows, in order to assess these differences. They show that the so-called Extended Self-Similarity (ESS) is evident in the solar wind turbulence up to a certain scale. Furthermore, up to a given order of the velocity structure functions, the scaling laws of MHD and fluids flows axe experimentally indistinguishable. However, differences can be observed for higher orders and the authors speculate on their origin. Dudok de Wit and Krasnosel'skikh present analysis of strong plasma turbulence in the vicinity of the Earth's bow shock with the help of magnetometer data from the AMPTE UKS satellite. They demonstrate that there is a departure from Gaussianity which could be a signature of multifractality. However, they point out that the complexity of plasma turbulence precludes a more quantitative understanding. Finally, the authors emphasise the fact that the duration of records prevents to obtain any reliable estimate of structure functions beyond the fourth order. Sylos Labini and Pietronero discuss the problem of galaxy correlations. They conclude from all the recently available three dimensional catalogues that the distribution of galaxies and clusters is fractal with dimension D ~ 2 up to the present observational limits without any tendency towards homogenization. This result is discussed in contrast to angular data analysis. Furthermore, they point out that the galaxy-cluster mismatch disappears when considering a multifractal distribution of matter. They emphasise that a new picture emerges which changes the standard ideas about the properties of the universe and requires a corresponding change in the related theoretical concepts. Chilla et al. investigate with the help of a laboratory experiment the possible influence of the presence of a large scale structure on the intermittency of small scale structures. They study a flow between coaxial co-rotating disks generating a strong axial vortex over a turbulent background. They show that the cascade process is preserved although strongly modified and they discuss the relevance of parameters developed for the description of intermittency in homogeneous turbulence to evaluate this modification.

High speed transition prediction

NASA Technical Reports Server (NTRS)

Gasperas, Gediminis

1992-01-01

The main objective of this work period was to develop, acquire and apply state-of-the-art tools for the prediction of transition at high speeds at NASA Ames. Although various stability codes as well as basic state codes were acquired, the development of a new Parabolized Stability Equation (PSE) code was minimal. The time that was initially allocated for development was used on other tasks, in particular for the Leading Edge Suction problem, in acquiring proficiency in various graphics tools, and in applying these tools to evaluate various Navier-Stokes and Euler solutions. The second objective of this work period was to attend the Transition and Turbulence Workshop at NASA Langley in July and August, 1991. A report on the Workshop follows. From July 8, 1991 to August 2, 1991, the author participated in the Transition and Turbulence Workshop at NASA Langley. For purposes of interest here, analysis can be said to consist of solving simplified governing equations by various analytical methods, such as asymptotic methods, or by use of very meager computer resources. From the composition of the various groups at the Workshop, it can be seen that analytical methods are generally more popular in Great Britain than they are in the U.S., possibly due to historical factors and the lack of computer resources. Experimenters at the Workshop were mostly concerned with subsonic flows, and a number of demonstrations were provided, among which were a hot-wire experiment to probe the boundary layer on a rotating disc, a hot-wire rake to map a free shear layer behind a cylinder, and the use of heating strips on a flat plate to control instability waves and consequent transition. A highpoint of the demonstrations was the opportunity to observe the rather noisy 'quiet' supersonic pilot tunnel in operation.

Teaching evidence-based medicine: Impact on students' literature use and inpatient clinical documentation.

PubMed

Sastre, Elizabeth Ann; Denny, Joshua C; McCoy, Jacob A; McCoy, Allison B; Spickard, Anderson

2011-01-01

Effective teaching of evidence-based medicine (EBM) to medical students is important for lifelong self-directed learning. We implemented a brief workshop designed to teach literature searching skills to third-year medical students. We assessed its impact on students' utilization of EBM resources during their clinical rotation and the quality of EBM integration in inpatient notes. We developed a physician-led, hands-on workshop to introduce EBM resources to all internal medicine clerks. Pre- and post-workshop measures included student's attitudes to EBM, citations of EBM resources in their clinical notes, and quality of the EBM component of the discussion in the note. Computer log analysis recorded students' online search attempts. After the workshop, students reported improved comfort using EBM and increased utilization of EBM resources. EBM integration into the discussion component of the notes also showed significant improvement. Computer log analysis of students' searches demonstrated increased utilization of EBM resources following the workshop. We describe the successful implementation of a workshop designed to teach third-year medical students how to perform an efficient EBM literature search. We demonstrated improvements in students' confidence regarding EBM, increased utilization of EBM resources, and improved integration of EBM into inpatient notes.

Population biology of the Florida manatee: An overview

USGS Publications Warehouse

O'Shea, Thomas J.; Ackerman, B.B.; O'Shea, Thomas J.; Ackerman, B.B.; Percival, H. Franklin

1995-01-01

In the following overview we discuss progress toward meeting the three objectives of the 1992 workshop: to provide a synthesis of existing information about manatee population biology; to evaluate the strengths and weaknesses of current data sets and approaches to research on manatee population biology; and to provide recommendations for research. We discuss progress in six topics that were assigned to working groups at the workshop: aerial survey and estimation of population size, reproduction, age structure, mortality, photoidentification and estimation of survival, and integration and modeling of population data. The overview includes recommendations by working group participants (*2 0'Shea et al. 1992). This workshop on manatee population biology was the most recent conference on the topic since 1978 (*BrowneIl and Rails 1981). Partly as a result of recommendations made at the 1978 workshop, several long-term population-related research projects were established. Therefore, we also measure progress in relation to knowledge available at the time of the earlier workshop. Finally, we provide a brief synopsis of pertinent new information on manatee population biology that became available between the 1992 workshop and publication of the proceedings and our conclusions about the status of the Florida manatee.

Least-squares Legendre spectral element solutions to sound propagation problems.

PubMed

Lin, W H

2001-02-01

This paper presents a novel algorithm and numerical results of sound wave propagation. The method is based on a least-squares Legendre spectral element approach for spatial discretization and the Crank-Nicolson [Proc. Cambridge Philos. Soc. 43, 50-67 (1947)] and Adams-Bashforth [D. Gottlieb and S. A. Orszag, Numerical Analysis of Spectral Methods: Theory and Applications (CBMS-NSF Monograph, Siam 1977)] schemes for temporal discretization to solve the linearized acoustic field equations for sound propagation. Two types of NASA Computational Aeroacoustics (CAA) Workshop benchmark problems [ICASE/LaRC Workshop on Benchmark Problems in Computational Aeroacoustics, edited by J. C. Hardin, J. R. Ristorcelli, and C. K. W. Tam, NASA Conference Publication 3300, 1995a] are considered: a narrow Gaussian sound wave propagating in a one-dimensional space without flows, and the reflection of a two-dimensional acoustic pulse off a rigid wall in the presence of a uniform flow of Mach 0.5 in a semi-infinite space. The first problem was used to examine the numerical dispersion and dissipation characteristics of the proposed algorithm. The second problem was to demonstrate the capability of the algorithm in treating sound propagation in a flow. Comparisons were made of the computed results with analytical results and results obtained by other methods. It is shown that all results computed by the present method are in good agreement with the analytical solutions and results of the first problem agree very well with those predicted by other schemes.

Summary of the Third AIAA CFD Drag Prediction Workshop

NASA Technical Reports Server (NTRS)

Vassberg, John C.; Tinoco, Edward N.; Mani, Mori; Brodersen, Olaf P.; Eisfeld, Bernhard; Wahls, Richard A.; Morrison, Joseph H.; Zickuhr, Tom; Laflin, Kelly R.; Mavriplis, DImitri J.

2007-01-01

The workshop focused on the prediction of both absolute and differential drag levels for wing-body and wing-al;one configurations of that are representative of transonic transport aircraft. The baseline DLR-F6 wing-body geometry, previously utilized in DPW-II, is also augmented with a side-body fairing to help reduce the complexity of the flow physics in the wing-body juncture region. In addition, two new wing-alone geometries have been developed for the DPW-II. Numerical calculations are performed using industry-relevant test cases that include lift-specific and fixed-alpha flight conditions, as well as full drag polars. Drag, lift, and pitching moment predictions from previous Reynolds-Averaged Navier-Stokes computational fluid Dynamics Methods are presented, focused on fully-turbulent flows. Solutions are performed on structured, unstructured, and hybrid grid systems. The structured grid sets include point-matched multi-block meshes and over-set grid systems. The unstructured and hybrid grid sets are comprised of tetrahedral, pyramid, and prismatic elements. Effort was made to provide a high-quality and parametrically consistent family of grids for each grid type about each configuration under study. The wing-body families are comprised of a coarse, medium, and fine grid, while the wing-alone families also include an extra-fine mesh. These mesh sequences are utilized to help determine how the provided flow solutions fair with respect to asymptotic grid convergence, and are used to estimate an absolute drag of each configuration.

Field/Lab Training Workshops in Planetary Geology and Astrobiology for Secondary School Teachers

NASA Astrophysics Data System (ADS)

Treiman, A.; Newsom, H.; Hoehler, T.; Tsairides, C.; Karlstrom, K.; Crossey, L.; Kiefer, W.; Kadel, S.; Garcia-Pichel, F.; Aubele, J.; Crumpler, L.

2003-12-01

Thematic field-lab-classroom workshops can be successful in training secondary teachers in planetary geology and astrobiology, from the LPI's 4 years experience. A typical workshop includes ˜4 days of field study and ˜3 days of related classroom/lab lectures and exercises. Up to 30 teachers have participated at once, and the staff averages 5 researchers and educators. The 2003 workshop, The Great Desert, focused on geology and life in the Colorado Plateau as analogs for Mars. Specific emphases were on geologic processes exemplified in the Grand Canyon, Sunset Crater and Meteor Crater, and on biotic communities in desert soils and hot springs. The classroom portion, hosted by UNM, included lectures, lab work, and teaching exercises keyed to the field experience and its extensions to Mars. Formal followups: non-directive exit questionnaires; email list-serves for participants; websites with images, presentations, and exercises from the workshop, and links to related materials (e.g., http://www.lpi.usra.edu/education/EPO/yellowstone2002/index.html); and interviews for six-month retrospective. Graduate and continuing education credit are available. Past workshops, all relevant to Mars, have targeted: geology and extremophiles of Yellowstone NP, geology of the Cascade volcanos; and giant floods and lava flows of central Washington. The greatest benefit of this workshop format is the teachers' intense, deep experience, emphasizing scientific content. They learn from field, classroom, and laboratory perspectives, and work with PhD level researchers who contribute their excitement, demonstrate and teach critical thought processes, and provide authoritative background and answers. The small group size permits personal interactions (among teachers and presenters) that complement each other's understanding and appreciation of the subject. They log ˜65 contact hours with the staff, in small groups or one-on-one. Teachers return to the classroom with personal experiences, with heightened appreciation, excited, and energetic. The teachers are asked to share their knowledge in their districts (in one case, saving the district thousands of dollars). For the presenters, the workshop format allows personal interactions with the teachers, leading to enhanced appreciation of their perspectives and needs. This year, teacher input assisted with an NSF-sponsored National Park education initiative. And in one case, a meaningful research collaboration has come from these workshops. Logistics is the greatest challenge of this workshop format. Hosts and teaching/lab venues need to be arranged early in sites dictated by science content, not convenience. Travel and lodging must be arranged for teachers and presenters at several sites, usually all distant from the organizing institution. Logistics also dictates that each workshop cannot serve more than about 30 teachers. The depth of knowledge imparted and its long-term effects on the teachers and their districts offsets the small number of teachers reached per year. Authors here are the 2003 organizers and presenters. Many others have organized and presented at past workshops - especially Dr. A.J. Irving of U. Wash. We are grateful for past support from NASA Broker/Facilitator, and now from Sandia National Laboratory and NASA OSS/EPO.

Air-condition Control System of Weaving Workshop Based on LabVIEW

NASA Astrophysics Data System (ADS)

Song, Jian

The project of air-condition measurement and control system based on LabVIEW is put forward for the sake of controlling effectively the environmental targets in the weaving workshop. In this project, which is based on the virtual instrument technology and in which LabVIEW development platform by NI is adopted, the system is constructed on the basis of the virtual instrument technology. It is composed of the upper PC, central control nodes based on CC2530, sensor nodes, sensor modules and executive device. Fuzzy control algorithm is employed to achieve the accuracy control of the temperature and humidity. A user-friendly man-machine interaction interface is designed with virtual instrument technology at the core of the software. It is shown by experiments that the measurement and control system can run stably and reliably and meet the functional requirements for controlling the weaving workshop.

Impact of after-school nutrition workshops in a public library setting.

PubMed

Freedman, Marjorie R; Nickell, Audrey

2010-01-01

To determine if after-school nutrition workshops conducted in public libraries were related to lasting changes in food choice. "Snack Smart" workshops, based on Social Cognitive Theory, were conducted in 8 branch libraries (49 ethnically diverse children, ages 9 to 14) to assess changes in consumption of targeted food items by pretest, posttest, and follow-up food frequency questionnaires. Results were analyzed using the Friedman test for repeated measures and Wilcoxon signed rank test. Intake of milk, vegetables, and water significantly increased at 3-week posttest (P < .05), but only water intake showed a significant change from pretest to follow-up 3 months later. This low-intensity program did not produce lasting behavior change, as measured by changes in food frequency at 3 months post- intervention. The study supports the need to critically evaluate out-of-school nutrition programs for lasting impact. Copyright 2010 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

Proceedings of the Seventeenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1992-01-01

Proceedings of the Seventeenth Annual Software Engineering Workshop are presented. The software Engineering Laboratory (SEL) is an organization sponsored by NASA/Goddard Space Flight Center and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. Topics covered include: the Software Engineering Laboratory; process measurement; software reuse; software quality; lessons learned; and is Ada dying.

Toward generalized continuum models of granular soil and granular soil-tire interaction: A combined discrete element and thermomicromechanical continuum analysis of densely packed assemblies

DTIC Science & Technology

2007-04-30

flow and deformation of soils in contact with metallic and/or rubber -like bodies” Proceedings, 13th International Conference of the ISTVS 1, pp 201-208...soil- tyre interaction problem”, Proceedings, First North American Workshop on Modeling the Mechanics of Off-Road Mobility. Paper GL-94-30 U.S

6th International Workshop on Model Reduction in Reactive Flow

DTIC Science & Technology

2018-01-01

RESPONSIBLE PERSON 19b. TELEPHONE NUMBER Yiguang Ju 611102 c. THIS PAGE The public reporting burden for this collection of information is estimated...needed, and completing and reviewing the collection of information . Send comments regarding this burden estimate or any other aspect of this collection...of information , including suggesstions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and

Vortex Simulation of Turbulent Combustion

DTIC Science & Technology

1990-10-01

14. Nissan Motor Company Research Center, Yokoska, Japan, April 1990. 15. Mitsubishi Heavy Industries, Yokohama, Japan, April 1990. 16. Mazda Motor ...University of Rome Workshop on Fluid Mechanics of Combustion, June 1989. 2. Brown University, October 1989. 3. Ford Motor Company, Meeting on Flow...Computational Fluid Dynamics, Tokyo, Japan, April 1990. 12. Honda Motor Company, Wako, Japan, April 1990. 13. Toyota Motor Company, Nagoya, Japan, April 1990

Workshop on Two-Phase Fluid Behavior in a Space Environment

NASA Technical Reports Server (NTRS)

Swanson, Theodore D. (Editor); Juhasz, AL (Editor); Long, W. Russ (Editor); Ottenstein, Laura (Editor)

1989-01-01

The Workshop was successful in achieving its main objective of identifying a large number of technical issues relating to the design of two-phase systems for space applications. The principal concern expressed was the need for verified analytical tools that will allow an engineer to confidently design a system to a known degree of accuracy. New and improved materials, for such applications as thermal storage and as heat transfer fluids, were also identified as major needs. In addition to these research efforts, a number of specific hardware needs were identified which will require development. These include heat pumps, low weight radiators, advanced heat pipes, stability enhancement devices, high heat flux evaporators, and liquid/vapor separators. Also identified was the need for a centralized source of reliable, up-to-date information on two-phase flow in a space environment.

Measuring Engagement and Learning Outcomes During a Teacher Professional Development Workshop about Creative Climate Communication

NASA Astrophysics Data System (ADS)

Morrison, A.; Gold, A. U.; Soltis, N.; McNeal, K.; Kay, J. E.

2017-12-01

Climate science and global climate change are complex topics that require system-level thinking and the application of general science concepts. Identifying effective instructional approaches for improving climate literacy is an emerging research area with important broader impacts. Active learning techniques can ensure engagement throughout the learning process and increase retention of climate science content. Conceptual changes that can be measured as lasting learning gains occur when both the cognitive and affective domain are engaged. Galvanic skin sensors are a relatively new technique to directly measure engagement and cognitive load in science education. We studied the engagement and learning gains of 16 teachers throughout a one-day teacher professional development workshop focused on creative strategies to communicate about climate change. The workshop consisted of presentations about climate science, climate communication, storytelling and filmmaking, which were delivered using different pedagogical approaches. Presentations alternated with group exercises, clicker questions, videos and discussions. Using a pre-post test design we measured learning gains and attitude changes towards climate change among participating teachers. Each teacher wore a hand sensor to measure galvanic skin conductance as a proxy for emotional engagement. We surveyed teachers to obtain self-reflection data on engagement and on their skin conductance data during and after the workshop. Qualitative data provide critical information to aid the interpretation of skin conductance readings. Based on skin conductance data, teachers were most engaged during group work, discussions and videos as compared to lecture-style presentations. We discuss the benefits and limitations of using galvanic skin sensors to inform the design of teacher professional development opportunities. Results indicate that watching videos or doing interactive activities may be the most effective strategies for increasing teachers' knowledge of climate science.

Computation of Flow Over a Drag Prediction Workshop Wing/Body Transport Configuration Using CFL3D

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.; Biedron, Robert T.

2001-01-01

A Drag Prediction Workshop was held in conjunction with the 19th AIAA Applied Aerodynamics Conference in June 2001. The purpose of the workshop was to assess the prediction of drag by computational methods for a wing/body configuration (DLR-F4) representative of subsonic transport aircraft. This report details computed results submitted to this workshop using the Reynolds-averaged Navier-Stokes code CFL3D. Two supplied grids were used: a point-matched 1-to-1 multi-block grid, and an overset multi-block grid. The 1-to-1 grid, generally of much poorer quality and with less streamwise resolution than the overset grid, is found to be too coarse to adequately resolve the surface pressures. However, the global forces and moments are nonetheless similar to those computed using the overset grid. The effect of three different turbulence models is assessed using the 1-to-1 grid. Surface pressures are very similar overall, and the drag variation due to turbulence model is 18 drag counts. Most of this drag variation is in the friction component, and is attributed in part to insufficient grid resolution of the 1-to-1 grid. The misnomer of 'fully turbulent' computations is discussed; comparisons are made using different transition locations and their effects on the global forces and moments are quantified. Finally, the effect of two different versions of a widely used one-equation turbulence model is explored.

Do procedural skills workshops during family practice residency work?

PubMed Central

MacKenzie, Mark S.; Berkowitz, Jonathan

2010-01-01

ABSTRACT OBJECTIVE To determine if participation in a procedural skills workshop during family practice residency affects future use of these skills in postgraduate clinical practice. DESIGN Survey involving self-assessment of procedural skills experience and competence. SETTING British Columbia. PARTICIPANTS Former University of British Columbia family practice residents who trained in Vancouver, BC, including residents who participated in a procedural skills workshop in 2001 or 2003 and residents graduating in 2000 and 2002 who did not participate in the procedural skills workshop. MAIN OUTCOME MEASURES Self-assessed experience and competence in the 6 office-based procedural skills that were taught during the procedural skills workshops in 2001 and 2003. RESULTS Participation in a procedural skills workshop had no positive effect on future use of these skills in clinical practice. Participation in the workshop was associated with less reported experience (P = .091) in injection of lateral epicondylitis. As with previous Canadian studies, more women than men reported experience and competence in gynecologic procedures. More women than men reported experience (P = .001) and competence (P = .004) in intrauterine device insertion and experience (P = .091) in endometrial aspiration biopsy. More men than women reported competence (P = .052) in injection of trochanteric bursae. A third year of emergency training was correlated with an increase in reported experience (P = .021) in shoulder injection. CONCLUSION Participation in a procedural skills workshop during family practice residency did not produce a significant increase in the performance of these skills on the part of participants once they were in clinical practice. The benefit of a skills workshop might be lost when there is no opportunity to practise and perfect these skills. Sex bias in the case of some procedures might represent a needs-based acquisition of skills on the part of practising physicians. Short procedural skills workshops might be better suited to graduated physicians with more clinical experience. PMID:20705868

Finite elements: Theory and application

NASA Technical Reports Server (NTRS)

Dwoyer, D. L. (Editor); Hussaini, M. Y. (Editor); Voigt, R. G. (Editor)

1988-01-01

Recent advances in FEM techniques and applications are discussed in reviews and reports presented at the ICASE/LaRC workshop held in Hampton, VA in July 1986. Topics addressed include FEM approaches for partial differential equations, mixed FEMs, singular FEMs, FEMs for hyperbolic systems, iterative methods for elliptic finite-element equations on general meshes, mathematical aspects of FEMS for incompressible viscous flows, and gradient weighted moving finite elements in two dimensions. Consideration is given to adaptive flux-corrected FEM transport techniques for CFD, mixed and singular finite elements and the field BEM, p and h-p versions of the FEM, transient analysis methods in computational dynamics, and FEMs for integrated flow/thermal/structural analysis.

Studying geodesy and earthquake hazard in and around the New Madrid Seismic Zone

USGS Publications Warehouse

Boyd, Oliver Salz; Magistrale, Harold

2011-01-01

Workshop on New Madrid Geodesy and the Challenges of Understanding Intraplate Earthquakes; Norwood, Massachusetts, 4 March 2011 Twenty-six researchers gathered for a workshop sponsored by the U.S. Geological Survey (USGS) and FM Global to discuss geodesy in and around the New Madrid seismic zone (NMSZ) and its relation to earthquake hazards. The group addressed the challenge of reconciling current geodetic measurements, which show low present-day surface strain rates, with paleoseismic evidence of recent, relatively frequent, major earthquakes in the region. The workshop presentations and conclusions will be available in a forthcoming USGS open-file report (http://pubs.usgs.gov).

An evaluation of the emergency care training workshops in the province of KwaZulu-Natal, South Africa.

PubMed

Naidoo, Mergan

2017-03-30

Emergency care in South Africa is both complex and complicated which is further compromised by inadequately trained healthcare workers. Academic disciplines at the University of KwaZulu-Natal have run emergency care workshops for doctors and nurses providing primary emergency care, in the province for the last 14 years. This delivery of such training has evolved over time. The aim of this study was to evaluate the feedback and knowledge of participants attending the last nine workshops. An evaluation questionnaire asked participants to assess the workshops held in the province and to rate their perceived improvement in knowledge. A multiple choice questionnaire was conducted in the last few workshops and was administered pre- and postworkshop. The data were extracted onto an Excel spreadsheet and analysed in Stata version 13. Outcome measures were generated using percentages. A paired t-test was used to compare knowledge scores. Open-ended questions were also used to identify areas for future improvement. The majority (89.4%) of the participants worked in the primary emergency care setting. All participants found the quality of training, the facilitators and the training material good or excellent. Participants' perceived improvement in knowledge and skills and the objective measure of knowledge improved significantly (p < 0.001). Emergency care education using a combination of inter-professional simulation and lecture-based teaching has the potential of contributing towards better educational outputs in both undergraduate and postgraduate curricula.

International Society for Cellular Therapy perspective on immune functional assays for mesenchymal stromal cells as potency release criterion for advanced phase clinical trials.

PubMed

Galipeau, Jacques; Krampera, Mauro; Barrett, John; Dazzi, Francesco; Deans, Robert J; DeBruijn, Joost; Dominici, Massimo; Fibbe, Willem E; Gee, Adrian P; Gimble, Jeffery M; Hematti, Peiman; Koh, Mickey B C; LeBlanc, Katarina; Martin, Ivan; McNiece, Ian K; Mendicino, Michael; Oh, Steve; Ortiz, Luis; Phinney, Donald G; Planat, Valerie; Shi, Yufang; Stroncek, David F; Viswanathan, Sowmya; Weiss, Daniel J; Sensebe, Luc

2016-02-01

Mesenchymal stromal cells (MSCs) as a pharmaceutical for ailments characterized by pathogenic autoimmune, alloimmune and inflammatory processes now cover the spectrum of early- to late-phase clinical trials in both industry and academic sponsored studies. There is a broad consensus that despite different tissue sourcing and varied culture expansion protocols, human MSC-like cell products likely share fundamental mechanisms of action mediating their anti-inflammatory and tissue repair functionalities. Identification of functional markers of potency and reduction to practice of standardized, easily deployable methods of measurements of such would benefit the field. This would satisfy both mechanistic research as well as development of release potency assays to meet Regulatory Authority requirements for conduct of advanced clinical studies and their eventual registration. In response to this unmet need, the International Society for Cellular Therapy (ISCT) addressed the issue at an international workshop in May 2015 as part of the 21st ISCT annual meeting in Las Vegas. The scope of the workshop was focused on discussing potency assays germane to immunomodulation by MSC-like products in clinical indications targeting immune disorders. We here provide consensus perspective arising from this forum. We propose that focused analysis of selected MSC markers robustly deployed by in vitro licensing and metricized with a matrix of assays should be responsive to requirements from Regulatory Authorities. Workshop participants identified three preferred analytic methods that could inform a matrix assay approach: quantitative RNA analysis of selected gene products; flow cytometry analysis of functionally relevant surface markers and protein-based assay of secretome. We also advocate that potency assays acceptable to the Regulatory Authorities be rendered publicly accessible in an "open-access" manner, such as through publication or database collection. Copyright © 2015 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

ASTM international workshop on standards and measurements for tissue engineering scaffolds.

PubMed

Simon, Carl G; Yaszemski, Michael J; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A

2015-07-01

The "Workshop on Standards & Measurements for Tissue Engineering Scaffolds" was held on May 21, 2013 in Indianapolis, IN, and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active "guide" documents for educational purposes, but few standard "test methods" or "practices." Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition, and drug release from scaffolds. Discussions highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Workshop participants emphasized the need to promote the use of standards in scaffold fabrication, characterization, and commercialization. Finally, participants noted that standards would be more broadly accepted if their impact in the TEMPs community could be quantified. Many scaffold standard needs have been identified and focus is turning to generating these standards to support the use of scaffolds in TEMPs. © 2014 Wiley Periodicals, Inc.

Evaluating the impact of an intensive education workshop on evidence-informed decision making knowledge, skills, and behaviours: a mixed methods study.

PubMed

Yost, Jennifer; Ciliska, Donna; Dobbins, Maureen

2014-01-17

Health professionals require a unique set of knowledge and skills in order to meet increasing expectations to use research evidence to inform practice and policy decisions. They need to be able to find, access, interpret, and apply the best available research evidence, along with information about patient preferences, clinical expertise, and the clinical context and resources, to such decisions. This study determined preferences for continuing education following an intensive educational workshop and evaluated the impact of the workshop on evidence informed decision making (EIDM) knowledge, skills, and behaviours. An explanatory mixed methods, longitudinal study design was implemented among a convenience sample of various health care professionals attending the workshop. EIDM knowledge, skills, and behaviours were quantitatively measured at baseline and six month follow-up, with EIDM knowledge and skills measured additionally immediately following the educational workshop (post-test measurement). To determine participants preferences for continuing education, data were collected using quantitative survey (post-test measurement) and qualitative (individual telephone interviews after six-month follow-up) methods. EIDM knowledge and skills increased significantly from baseline to immediately following the intervention [5.6, 95% CI (3.7, 7.4), P < 0.001] and from baseline to six-month follow-up [3.7, 95% CI (2.1, 5.3), P < 0.001], with a significant decrease from immediately following the intervention to six-month follow-up [-1.9, 95% CI (-3.5, -0.3), P 0.018]. EIDM behaviours increased, but not significantly, from baseline to six-month follow-up [1.7, 95% CI (-0.3, 3.8), P 0.095]. At baseline and six-month follow-up there was a weak, non-significant positive correlation between EIDM knowledge and skills and EIDM behaviours (r = 0.29, P 0.069 and r = 0.24, P 0.136, respectively). Over time there was a shift in preferences for timing and frequency of online continuing education strategies. Willingness to participate in continuing education, however, remained evident. An intensive educational workshop shows promise for increasing EIDM knowledge and skills. Increasing EIDM knowledge and skills may promote the capacity of health professionals to use research evidence when making practice and policy decisions and, in turn, lead to positive patient outcomes.

Ozone Correlative Measurements Workshop

NASA Technical Reports Server (NTRS)

Hilsenrath, E. (Editor)

1985-01-01

A study was conducted to determine the necessary parameters for the correlation of data on Earth ozone. Topics considered were: (1) measurement accuracy; (2) equipment considerations (SBUV); and (3) ground based measurements to support satellite data.

Practising what we preach: using cognitive load theory for workshop design and evaluation.

PubMed

Naismith, Laura M; Haji, Faizal A; Sibbald, Matthew; Cheung, Jeffrey J H; Tavares, Walter; Cavalcanti, Rodrigo B

2015-12-01

Theory-based instructional design is a top priority in medical education. The goal of this Show and Tell article is to present our theory-driven approach to the design of instruction for clinical educators. We adopted cognitive load theory as a framework to design and evaluate a series of professional development workshops that were delivered at local, national and international academic conferences in 2014. We used two rating scales to measure participants' cognitive load. Participants also provided narrative comments as to how the workshops could be improved. Cognitive load ratings from 59 participants suggested that the workshop design optimized learning by managing complexity for different levels of learners (intrinsic load), stimulating cognitive processing for long-term memory storage (germane load), and minimizing irrelevant distracters (extraneous load). Narrative comments could also be classified as representing intrinsic, extraneous, or germane load, which provided specific directions for ongoing quality improvement. These results demonstrate that a cognitive load theory approach to workshop design and evaluation is feasible and useful in the context of medical education.

Scientific Modeling for Inquiring Teachers Network (SMIT'N): The Influence on Elementary Teachers' Views of Nature of Science, Inquiry, and Modeling

ERIC Educational Resources Information Center

Akerson, Valarie L.; Townsend, J. Scott; Donnelly, Lisa A.; Hanson, Deborah L.; Tira, Praweena; White, Orvil

2009-01-01

This paper summarizes the findings from a K-6 professional development program that emphasized scientific inquiry and nature of science within the theme of scientific modeling. During the 2-week summer workshop and follow up school year workshops, the instruction modeled a 5-E learning cycle approach. Pre and posttesting measured teachers' views…

Global climate change and international security.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karas, Thomas H.

2003-11-01

This report originates in a workshop held at Sandia National Laboratories, bringing together a variety of external experts with Sandia personnel to discuss 'The Implications of Global Climate Change for International Security.' Whatever the future of the current global warming trend, paleoclimatic history shows that climate change happens, sometimes abruptly. These changes can severely impact human water supplies, agriculture, migration patterns, infrastructure, financial flows, disease prevalence, and economic activity. Those impacts, in turn, can lead to national or international security problems stemming from aggravation of internal conflicts, increased poverty and inequality, exacerbation of existing international conflicts, diversion of national andmore » international resources from international security programs (military or non-military), contribution to global economic decline or collapse, or international realignments based on climate change mitigation policies. After reviewing these potential problems, the report concludes with a brief listing of some research, technology, and policy measures that might mitigate them.« less

Insiders Views of the Valley of Death Behavioral and Institutional Perspectives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolfe, Amy K; Bjornstad, David J; Shumpert, Barry L

Valley of death describes the metaphorical depths to which promising science and technology too often plunge, never to emerge and reach their full potential. Behavioral and institutional perspectives help in understanding the implications of choices that inadvertently lead into rather than over the valley of death. A workshop conducted among a diverse set of scientists, managers, and technology transfer staff at a U.S. national laboratory is a point of departure for discussing behavioral and institutional elements that promote or impede the pathway from research toward use, and for suggesting actionable measures that can facilitate the flow of information and productsmore » from research toward use. In the complex systems that comprise research institutions, where competing pressures can create barriers to information or technology transfer, one recommendation is to re-frame the process as a more active ushering toward use.« less

Information for Innovation and Socioeconomic Development

NASA Astrophysics Data System (ADS)

Pearlman, F.; Stewart, M. A.

2013-12-01

This presentation reviews and extends the results of a workshop held in Florence, Italy in June 2013. This was the latest in a series of workshops on the 'Socioeconomic Benefits of Environmental Information'. The focus of this workshops included: 1. Information (Earth Observation, geospatial data, community generated data) as a driver for economic and social development, including measures of well-being that move beyond GDP as an indicator 2. Economic impact of innovations stemming from Open Data and the re-use of Public Sector Information 3. Importance of communications to reach across disciplines from scientists to citizen-scientists to end-users. Keynote addresses highlighted the state of the art, in this multi-disciplinary field and introduced the three themes above. The workshop included several panel discussions addressing key approaches to analyzing and understanding socioeconomic impacts. . This presentation extracts the key elements from the discussions and analyzes paths forward for improved impact assessments.

Report of the clinical donor case workshop of the European Association of Tissue Banks Annual Congress 2013.

PubMed

van Wijk, Marja J; Beele, Hilde; Brubaker, Scott A; Navarro, Aurora; Wulff, Birgit; Warwick, Ruth M

2015-09-01

The European Association of Tissue Banks (EATB) Donor Case Workshop is a forum held within the program of the EATB Annual Congress. The workshop offers an opportunity to discuss and evaluate approaches taken to challenging donor selection and donation ethics, and it strengthens networking between tissue banking professionals. The workshops actively engage participants from a wide array of international expertise, in an informal, secure and enjoyable setting in which learning from peers and finding potential solutions for submitted cases are facilitated. This report reflects some of the discussion at the Donor Case Workshop during the EATB Annual Congress in Brussels in 2013. The presented cases demonstrate that the findings, their interpretation, the resulting actions and preventive measures in the different tissue facilities are not always predictable. The varied responses from participants and lack of consensus corroborate this and clearly indicate that operating procedures do not comprehensively cover or prepare for all eventualities. For many of the issues raised there is no relevant information in the published literature. By publication of a summary of the discussions we hope to reach a wider audience, to provide information gathered at the workshop and to stimulate individuals and institutions to undertake further literature reviews or to undertake research in order to gather evidence concerning the discussed topics.

The 2010 AOP Workshop Summary Report

NASA Technical Reports Server (NTRS)

Hooker, Stanford B.; Morrow, John H.; Brown, James W.; Firestone, Elaine R.

2011-01-01

The rationale behind the current workshop, which was hosted by Biospherical Instruments Inc. (BSI), was to update the community and get community input with respect to the following: topics not addressed during the first workshop, specifically the processing of above-water apparent optical property (AOP data) within the Processing of Radiometric Observations of Seawater using Information Technologies (PROSIT) architecture; PROSIT data processing issues that have developed or tasks that have been completed, since the first workshop; and NASA instrumentation developments, both above- and in-water, that are relevant to both workshops and next generation mission planning. The workshop emphasized presentations on new AOP instrumentation, desired and required features for processing above-water measurements of the AOPs of seawater, working group discussions, and a community update for the in-water data processing already present in PROSIT. The six working groups were organized as follows: a) data ingest and data products; b) required and desired features for optically shallow and optically deep waters; c) contamination rejection (clouds), corrections, and data filtering; d) sun photometry and polarimetry; e) instrumentation networks; and f) hyperspectral versus fixed-wavelength sensors. The instrumentation networks working group was intended to provide more detailed information about desired and required features of autonomous sampling systems. Plenary discussions produced a number of recommendations for evolving and documenting PROSIT.

Improving flow in the OR.

PubMed

Blouin-Delisle, Charles Hubert; Drolet, Renee; Gagnon, Serge; Turcotte, Stephane; Boutet, Sylvie; Coulombe, Martin; Daneau, Eric

2018-03-12

Purpose The purpose of this paper is to increase efficiency in ORs without affecting quality of care by improving the workflow processes. Administrative processes independent of the surgical act can be challenging and may lead to clinical impacts such as increasing delays. The authors hypothesized that a Lean project could improve efficiency of surgical processes by reducing the length of stays in the recovery ward. Design/methodology/approach Two similar Lean projects were performed in the surgery departments of two hospitals of the Centre Hospitalier Universitaire de Québec: Hôtel Dieu de Quebec (HDQ) and Hôpital de l'Enfant Jesus (HEJ). The HDQ project designed around a Define, Measure, Analyse, Improve and Control process revision and a Kaizen workshop focused on patients who were hospitalized in a specific care unit after surgery and the HEJ project targeted patients in a post-operative ambulatory context. The recovery ward output delay was measured retrospectively before and after project. Findings For the HDQ Lean project, wasted time in the recovery ward was reduced by 62 minutes (68 percent reduction) between the two groups. The authors also observed an increase of about 25 percent of all admissions made in the daytime after the project compared to the time period before the project. For the HEJ Lean project, time passed in the recovery ward was reduced by 6 min (29 percent reduction). Originality/value These projects produced an improvement in the flow of the OR without targeting clinical practices in the OR itself. They demonstrated that change in administrative processes can have a great impact on the flow of clinical pathways and highlight the need for comprehensive and precise monitoring of every step of the elective surgery patient trajectory.

Tsunami-HySEA model validation for tsunami current predictions

NASA Astrophysics Data System (ADS)

Macías, Jorge; Castro, Manuel J.; González-Vida, José Manuel; Ortega, Sergio

2016-04-01

Model ability to compute and predict tsunami flow velocities is of importance in risk assessment and hazard mitigation. Substantial damage can be produced by high velocity flows, particularly in harbors and bays, even when the wave height is small. Besides, an accurate simulation of tsunami flow velocities and accelerations is fundamental for advancing in the study of tsunami sediment transport. These considerations made the National Tsunami Hazard Mitigation Program (NTHMP) proposing a benchmark exercise focussed on modeling and simulating tsunami currents. Until recently, few direct measurements of tsunami velocities were available to compare and to validate model results. After Tohoku 2011 many current meters measurement were made, mainly in harbors and channels. In this work we present a part of the contribution made by the EDANYA group from the University of Malaga to the NTHMP workshop organized at Portland (USA), 9-10 of February 2015. We have selected three out of the five proposed benchmark problems. Two of them consist in real observed data from the Tohoku 2011 event, one at Hilo Habour (Hawaii) and the other at Tauranga Bay (New Zealand). The third one consists in laboratory experimental data for the inundation of Seaside City in Oregon. Acknowledgements: This research has been partially supported by the Junta de Andalucía research project TESELA (P11-RNM7069) and the Spanish Government Research project DAIFLUID (MTM2012-38383-C02-01) and Universidad de Málaga, Campus de Excelencia Andalucía TECH. The GPU and multi-GPU computations were performed at the Unit of Numerical Methods (UNM) of the Research Support Central Services (SCAI) of the University of Malaga.

Proceedings of the International Workshop on Sustainable ForestManagement: Monitoring and Verification of Greenhouse Gases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sathaye; Makundi; Goldberg

1997-07-01

The International Workshop on Sustainable Forest Management: Monitoring and Verification of Greenhouse Gases was held in San Jose, Costa Rica, July 29-31, 1996. The main objectives of the workshop were to: (1) assemble key practitioners of forestry greenhouse gas (GHG) or carbon offset projects, remote sensing of land cover change, guidelines development, and the forest products certification movement, to offer presentations and small group discussions on findings relevant to the crucial need for the development of guidelines for monitoring and verifying offset projects, and (2) disseminate the findings to interested carbon offset project developers and forestry and climate change policymore » makers, who need guidance and consistency of methods to reduce project transaction costs and increase probable reliability of carbon benefits, at appropriate venues. The workshop brought together about 45 participants from developed, developing, and transition countries. The participants included researchers, government officials, project developers, and staff from regional and international agencies. Each shared his or her perspectives based on experience in the development and use of methods for monitoring and verifying carbon flows from forest areas and projects. A shared sense among the participants was that methods for monitoring forestry projects are well established, and the techniques are known and used extensively, particularly in production forestry. Introducing climate change with its long-term perspective is often in conflict with the shorter-term perspective of most forestry projects and standard accounting principles. The resolution of these conflicts may require national and international agreements among the affected parties. The establishment of guidelines and protocols for better methods that are sensitive to regional issues will be an important first step to increase the credibility of forestry projects as viable mitigation options. The workshop deliberations led to three primary outputs: (1) a Workshop Statement in the JI Quarterly, September, 1996; (2) the publication of a series of selected peer-reviewed technical papers from the workshop in a report of the Lawrence Berkeley National Laboratory (LBNL. 40501); and (3) a special issue of the journal ''Mitigation and Adaptation Strategies for Global Change'', Kluwer Academic Publishers. The outputs will be distributed to practitioners in this field and to negotiators attending the Framework Convention on Climate Change (FCCC) deliberations leading up to the Third conference of Parties in Kyoto, in December 1997.« less

The Zodiak workshop: an innovative model for teaching financial management through partnership with industry.

PubMed

Lloyd, James W; Frawley, Suzanne L; Neer, Charles A; Merle, Christine; Goebel, Richard

2004-01-01

The National Commission on Veterinary Economic Issues (NCVEI) is working to enhance the non-technical skills, knowledge, aptitudes, and attitudes (SKAs) of veterinarians. This report describes the development of an innovative model for teaching the principles of financial management as they apply to the veterinary practice. Zodiak: The Game of Business Finance and Strategy is a "business literacy" game in which players work together in small teams (generally four people) to run a fictional multi-million-dollar company called Zodiak Industries for three "years" in order to learn principles of business finance and strategy. After finishing the 4.5-hour game, participants spend the rest of the workshop making the right "Connections"-exercises designed to connect what they have learned to business strategies, financial statements, and operational tactics drawn from veterinary practice. Issues addressed for the veterinary practice, with parallels drawn to Zodiak, included return on owner investment in a veterinary practice (vs. salary drawn by owner veterinarians); pricing (setting prices, price elasticity of demand, and relationships between volume, quality, and price); human resources and operations management as they relate to profitability and efficiency; cash flow and management of accounts receivable; and commonly used financial benchmarks. Workshop venues have included Michigan State University, The Ohio State University, the University of Illinois, and Purdue University. Financial and in-kind support were provided through partnership with Pharmacia Animal Health (now Pfizer Animal Health) and Hill's Pet Nutrition, Inc. Through course evaluations, participants generally rated the workshop high as an educational experience and indicated that the most important things learned were related to financial management (principles, terminology, and methods). The most enjoyable aspects of the workshop tended to be group discussions, teamwork, the dynamic/interactive environment, and the "game" atmosphere. Based on these experiences, the Zodiak workshop provides a useful model for teaching career development and practice management topics to veterinary students. The business simulation in a workshop format was especially useful for teaching these "non-mainstream" topics, as traditional classroom lecture approaches might not have engaged students sufficiently to achieve effective learning. In addition, the partnership developed between academia and industry offered substantial benefits to both parties. Similar educational approaches should be considered for additional aspects of the non-technical SKAs.

The atmospheric effects of stratospheric aircraft. Report of the 1992 Models and Measurements Workshop. Volume 3: Special diagnostic studies

NASA Technical Reports Server (NTRS)

Prather, Michael J. (Editor); Remsberg, Ellis E. (Editor)

1993-01-01

This Workshop on Stratospheric Models and Measurements (M&M) marks a significant expansion in the history of model intercomparisons. It provides a foundation for establishing the credibility of stratospheric models used in environmental assessments of chlorofluorocarbons, aircraft emissions, and climate-chemistry interactions. The core of the M&M comparisons involves the selection of observations of the current stratosphere (i.e., within the last 15 years): these data are believed to be accurate and representative of certain aspects of stratospheric chemistry and dynamics that the models should be able to simulate.

Peer-assisted teaching of basic surgical skills.

PubMed

Preece, Ryan; Dickinson, Emily Clare; Sherif, Mohamed; Ibrahim, Yousef; Ninan, Ann Susan; Aildasani, Laxmi; Ahmed, Sartaj; Smith, Philip

2015-01-01

Basic surgical skills training is rarely emphasised in undergraduate medical curricula. However, the provision of skills tutorials requires significant commitment from time-constrained surgical faculty. We aimed to determine how a peer-assisted suturing workshop could enhance surgical skills competency among medical students and enthuse them towards a career in surgery. Senior student tutors delivered two suturing workshops to second- and third- year medical students. Suturing performance was assessed before and after teaching in a 10-min suturing exercise (variables measured included number of sutures completed, suture tension, and inter-suture distance). Following the workshop, students completed a questionnaire assessing the effect of the workshop on their suturing technique and their intention to pursue a surgical career. Thirty-five students attended. Eighty-one percent believed their medical school course provided insufficient basic surgical skills training. The mean number of sutures completed post-teaching increased significantly (p < 0.001), and the standard deviation of mean inter-suture distance halved from ± 4.7 mm pre-teaching, to ± 2.6 mm post-teaching. All students found the teaching environment to be relaxed, and all felt the workshop helped to improve their suturing technique and confidence; 87% found the peer-taught workshop had increased their desire to undertake a career in surgery. Peer-assisted learning suturing workshops can enhance medical students' competence with surgical skills and inspire them towards a career in surgery. With very little staff faculty contribution, it is a cheap and sustainable way to ensure ongoing undergraduate surgical skills exposure.

"See One, Sim One, Do One"- A National Pre-Internship Boot-Camp to Ensure a Safer "Student to Doctor" Transition.

PubMed

Minha, Sa'ar; Shefet, Daphna; Sagi, Doron; Berkenstadt, Haim; Ziv, Amitai

2016-01-01

The transition for being a medical student to a full functioning intern is accompanied by considerable stress and sense of unpreparedness. Simulation based workshops were previously reported to be effective in improving the readiness of interns and residents to their daily needed skills but only few programs were implemented on a large scale. A nationally endorsed and mandated pre-internship simulation based workshop is reported. We hypothesized that this intervention will have a meaningful and sustained impact on trainees' perception of their readiness to internship with regard to patient safety and quality of care skills. Main outcome measure was the workshop's contribution to professional training in general and to critical skills and error prevention in particular, as perceived by participants. Between 2004 and 2011, 85 workshops were conducted for a total of 4,172 trainees. Eight-hundred and six of the 2,700 participants approached by e-mail, returned feedback evaluation forms, which were analyzed. Eighty five percent of trainees perceived the workshop as an essential component of their professional training, and 87% agreed it should be mandatory. These ratings peaked during internship and were generally sustained 3 years following the workshop. Contribution to emergency care skills was especially highly ranked (83%). Implementation of a mandatory, simulation-based, pre-internship workshop on a national scale made a significant perceived impact on interns and residents. The sustained impact should encourage adopting this approach to facilitate the student to doctor transition.

Energetics of Vortex Ring Formation.

DTIC Science & Technology

1983-11-01

Sorohia, V., "An Experimental Investigation of Thrust Augmenting Ejector Flows", Proceedings of the Ejector Workshop for Aerospace Applications, AFWAL-TR...induction thrust augmentrs, su’h comparing thr mass and energy content of fully formed as the ejector , the migration of finite sized eddie, laminar vortex...Intermittent Jet to a Secondary Fluid in an Ejector Type Thrust Augmentor", Hiller Aircraft Company, Interim Report ARD-305, June 1962. 3. Bernal, L. and

Seals Flow Code Development

NASA Technical Reports Server (NTRS)

1991-01-01

In recognition of a deficiency in the current modeling capability for seals, an effort was established by NASA to develop verified computational fluid dynamic concepts, codes, and analyses for seals. The objectives were to develop advanced concepts for the design and analysis of seals, to effectively disseminate the information to potential users by way of annual workshops, and to provide experimental verification for the models and codes under a wide range of operating conditions.

Recruiting student in Sciences in Rural Environment: The Air Pollution Workshop

NASA Astrophysics Data System (ADS)

Kubatova, A.; Pedersen, D.

2011-12-01

The number of students in sciences is declining and thus it is critical to employ a variety of initiatives to familiarize students with various topics in sciences as well as the university environment. In particular, this is a challenge in rural communities where many students do not have easy access to university campuses. Therefore, we have implemented a workshop for junior and senior high school students. We decided to run this workshop on the campus, as this provided not only exposure of the students to scientific and lecturing facilities, but also to life at the university. Holding the workshop on the university campus also enabled faculty and graduate students from several departments to participate, thus allowing for presentation of a wide variety of topics within atmospheric sciences. Our experiences with the continuously growing workshops - from 50 to 180 participating students - will be shared. Participants were students from both rural and urban areas. These workshops, therefore, contributed to our outreach and service to the local community and to students coming from the rural communities of the upper Midwest and Western states. The workshops are organized annually over the spring break, thus ensuring availability of facilities on the campus. The one-day workshop includes a short cycle of presentations focused on the characterization of atmospheric PM and several critical issues connected with it. The expert faculty members from several departments involved in such research present on global warming, air pollution, aerosol formation, measurement using an aircraft, the relation of emissions and energy production, and on modeling of atmospheric processes. This lecture series (each no longer than 15 min) was broken down by fun demonstrations to break the ice and attract students' attention. Following the presentations, students participated in demonstrations performed in the Chemistry Department. The demonstrations included several hands-on activities, starting with simple experiments such as making a cloud in a bottle, chromatography of marker colors, or conversion of dry ice to gas. These "easy" experiments provided explanation of fundamental principles for more scientifically oriented demonstrations including aerosol number concentration measurements, analysis of wood smoke using gas chromatography. The facilitators were mainly graduate students and postdoctoral fellows from the Chemistry Department. These people came from various countries, thus providing a diverse environment strongly appreciated by visiting students. The effectiveness of the workshop was evaluated through a series of pre- and post- surveys providing feedback on organization as well as on learning experiences given to students and teachers. The detailed results from the survey analysis will be reported. In general we were impressed by the current knowledge and interest of students coming to the workshop, suggesting that the decreasing number of students in the sciences may not be due to lack of knowledge or interest. In addition, we consider the workshop to be a success story based on the teachers who are bringing students back every year. The important features of the workshop, such as economical feasibility and details on organization and structure, will be discussed.

Summary of Propagation Cases of the Second AIAA Sonic Boom Prediction Workshop

NASA Technical Reports Server (NTRS)

Rallabhandi, Sriram; Loubeau, Alexandra

2017-01-01

A summary is provided for the propagation portion of the second AIAA Sonic Boom Workshop held January 8, 2017 in conjunction with the AIAA SciTech 2017 conference. Near-field pressure waveforms for two cases were supplied and ground signatures at multiple azimuthal angles as well as their corresponding loudness metrics were requested from 10 participants, representing 3 countries. Each case had some required runs, as well as some optional runs. The required cases included atmospheric profiles with measured data including winds, using Radiosonde balloon data at multiple geographically spread locations, while the optional cases included temperature and pressure profiles from the US Standard atmosphere. The humidity profiles provided for the optional cases were taken from ANSI guidance, as the authors were unaware of an accepted standard at the time the cases were released to the participants. Participants provided ground signatures along with the requested data, including some loudness metrics using their best practices, which included lossy as well as lossless schemes. All the participants' submissions, for each case, are compared and discussed. Noise or loudness measures are calculated and detailed comparisons and statistical analyses are performed and presented. It has been observed that the variation in the loudness measures and spread between participants' submissions increased as the computation proceeded from under-track locations towards the lateral cut-off. Lessons learned during this workshop are discussed and recommendations are made for potential improvements and possible subsequent workshops as we collectively attempt to refine our analysis methods.

March 2011 Physical Indicators Workshop Summary Report

NASA Technical Reports Server (NTRS)

Roberts, Brent

2011-01-01

The National Climate Assessment (NCA) convened a workshop on Physical Climate Indicators from 29-30 March 2011, as part of a series on Monitoring Climate Change and its Impacts . The overarching goal of this workshop was to identify a few broad categories of potential physical climate indicators using a set of priorities developed by the NCA, and to provide a clear justification for how they would inform the Nation about climate change. Additional goals included providing input on the overall NCA framework for selecting the indicators and suggesting methodologies to construct indicators. Although one of the workshop goals was to address the status of current observational networks to support indicators, this was not a main focus of any single discussion. However, participants agreed with the NCA indicator vision that high quality data were needed to develop indicators, and generally focused on identifying indicator categories that current observation systems could support. The nearly 60 participants, primarily from Federal agencies, received a white paper in advance of the workshop that detailed the NCA vision for a coordinated suite of climate-related physical, ecological, and societal indicators. The intent of these national indicators of change is to develop a way to evaluate and communicate over time both the rate of change in impacts and the capacity to respond to climate drivers. These indicators will be tracked as a part of ongoing, long-term assessment activities, with adjustments as necessary to adapt to changing conditions and understanding. An initial framework was provided to workshop participants to ensure that everyone understood the audience, scope, and purpose of the indicators. A common lexicon was defined since indicator terminology varies widely. In addition, several potential approaches to grouping or categorizing the indicators were presented. Participants spent most of their time in small breakout groups with facilitators, working to address a common set of questions. The workshop was structured to start with the broadest issue and then focus down as the workshop progressed. The first breakout therefore solicited comments on the NCA indicator framework, followed by discussion of the potential approaches to organizing the physical climate indicators. Once several approaches were identified, the groups then worked to define specific measurements, or types of measurements, that could be used to create the indicators.

Developing an Analytical Framework: Incorporating Ecosystem Services into Decision Making - Proceedings of a Workshop

USGS Publications Warehouse

Hogan, Dianna; Arthaud, Greg; Pattison, Malka; Sayre, Roger G.; Shapiro, Carl

2010-01-01

The analytical framework for understanding ecosystem services in conservation, resource management, and development decisions is multidisciplinary, encompassing a combination of the natural and social sciences. This report summarizes a workshop on 'Developing an Analytical Framework: Incorporating Ecosystem Services into Decision Making,' which focused on the analytical process and on identifying research priorities for assessing ecosystem services, their production and use, their spatial and temporal characteristics, their relationship with natural systems, and their interdependencies. Attendees discussed research directions and solutions to key challenges in developing the analytical framework. The discussion was divided into two sessions: (1) the measurement framework: quantities and values, and (2) the spatial framework: mapping and spatial relationships. This workshop was the second of three preconference workshops associated with ACES 2008 (A Conference on Ecosystem Services): Using Science for Decision Making in Dynamic Systems. These three workshops were designed to explore the ACES 2008 theme on decision making and how the concept of ecosystem services can be more effectively incorporated into conservation, restoration, resource management, and development decisions. Preconference workshop 1, 'Developing a Vision: Incorporating Ecosystem Services into Decision Making,' was held on April 15, 2008, in Cambridge, MA. In preconference workshop 1, participants addressed what would have to happen to make ecosystem services be used more routinely and effectively in conservation, restoration, resource management, and development decisions, and they identified some key challenges in developing the analytical framework. Preconference workshop 3, 'Developing an Institutional Framework: Incorporating Ecosystem Services into Decision Making,' was held on October 30, 2008, in Albuquerque, NM; participants examined the relationship between the institutional framework and the use of ecosystem services in decision making.

Building Strong Geoscience Departments: Resources and Opportunities

NASA Astrophysics Data System (ADS)

Manduca, C. A.; MacDonald, R. H.; Feiss, P. G.; Richardson, R. M.; Ormand, C. J.

2008-12-01

The Building Strong Geoscience Departments program aims to foster communication and sharing among geoscience departments in order to allow for rapid dissemination of strong ideas and approaches. Sponsored by NAGT, AGI, AGU, and GSA, the project has developed a rich set of web resources, offered workshops on topics from recruiting students to developing a curriculum for the future, and hosted on-line discussion of high interest topics including accreditation. Online resources (http://serc.carleton.edu/departments/index.html) feature successful strategies and specific examples from a wide variety of geoscience departments across North America. These resources address student recruitment, development and assessment of curricula and programs, preparing students for careers, and the future of geoscience. This year the program will offer two new workshops (http://serc.carleton.edu/departments/workshops/index.html). The first, in February, will focus on assessing geoscience programs. Departments are increasingly called upon to assess the impact of their programs on students and to measure the degree to which they meet stated goals. This workshop will showcase the methods and instruments that geoscience departments are using for this assessment, as well as providing opportunities to learn more about evaluation theory and practice from experts in the field. The second workshop, in June, is designed to help departmental teams develop practical solutions to the challenges they currently face. Building on past workshops in this series, participants will help shape the focus of the workshop to meet their needs in areas such as curriculum, assessment, programming, recruitment, or management. A goal of this workshop is to put into broader use the wealth of examples and ideas documented on the project website.

NASA Breakthrough Propulsion Physics Workshop Proceedings

NASA Technical Reports Server (NTRS)

Millis, Marc G. (Editor); Williamson, Gary Scott (Editor)

1999-01-01

In August 1997, NASA sponsored a 3-day workshop to assess the prospects emerging from physics that may eventually lead to creating propulsion breakthroughs -the kind of breakthroughs that could revolutionize space flight and enable human voyages to other star systems. Experiments and theories were discussed regarding the coupling of gravity and electromagnetism, vacuum fluctuation energy, warp drives and wormholes, and superluminal quantum tunneling. Because the propulsion goals are presumably far from fruition, a special emphasis was to identify affordable, near-term, and credible research tasks that could make measurable progress toward these grand ambitions. This workshop was one of the first steps for the new NASA Breakthrough Propulsion Physics program led by the NASA Lewis Research Center.

Proceedings of Workshop XVI; The dynamic characteristics of faulting inferred from recordings of strong ground motion

USGS Publications Warehouse

Boatwright, John; Jacobson, Muriel L.

1982-01-01

The strong ground motions radiated by earthquake faulting are controlled by the dynamic characteristics of the faulting process. Although this assertion seems self-evident, seismologists have only recently begun to derive and test quantitative relations between common measures of strong ground motion and the dynamic characteristics of faulting. Interest in this problem has increased dramatically in past several years, however, resulting in a number of important advances. The research presented in this workshop is a significant part of this scientific development. Watching this development occur through the work of many scientists is exciting; to be able to gather a number of these scientists together in one workshop is a remarkable opportunity.

Improving eating disorders mental health literacy: a preliminary evaluation of the "Should I say something?" workshop.

PubMed

Gratwick-Sarll, Kassandra; Bentley, Caroline

2014-01-01

A repeated measures, uncontrolled, preliminary evaluation of a single 3-hour workshop-"Should I Say Something?"-aimed at improving eating disorders mental health literacy, was conducted in a sample of 177 university undergraduates. Following participation in the workshop, significant increases in eating disorder recognition and knowledge, and significant decreases in stigmatizing attitudes, were reported by participants. Moreover, 85% of participants reported that they provided assistance to someone whom they suspected had a mental health condition, including an eating disorder, during the 3-month follow-up period. This study provides preliminary evidence that "Should I Say Something?" may be effective in improving the mental health literacy of young people.

Joint Acoustic Propagation Experiment (JAPE-91) Workshop

NASA Technical Reports Server (NTRS)

Willshire, William L., Jr. (Compiler); Chestnutt, David (Compiler)

1993-01-01

The Joint Acoustic Propagation Experiment (JAPE), was conducted at the White Sands Missile Range, New Mexico, USA, during the period 11-28 Jul. 1991. JAPE consisted of various short and long range propagation experiments using various acoustic sources including speakers, propane cannons, helicopters, a 155 mm howitzer, and static high explosives. Of primary importance to the performance of theses tests was the extensive characterization of the atmosphere during these tests. This atmospheric characterization included turbulence measurements. A workshop to disseminate the results of JAPE-91 was held in Hampton, VA, on 28 Apr. 1993. This report is a compilation of the presentations made at the workshop along with a list of attendees and the agenda.

Rotordynamic Instability Problems in High-Performance Turbomachinery, 1986

NASA Technical Reports Server (NTRS)

1987-01-01

The first rotordynamics workshop proceedings (NASA CP-2133, 1980) emphasized a feeling of uncertainty in predicting the stability of characteristics of high-performance turbomachinery. In the second workshop proceedings (NASA CP-2250, 1982) these uncertainities were reduced through programs established to systematically resolve problems, with emphasis on experimental validiation of the forces that influence rotordynamics. In third proceedings (NASA CP-2338, 1984) many programs for predicting or measuring forces and force coefficients in high-performance turbomachinery produced results. Data became available for designing new machines with enhanced stability characteristics or for upgrading existing machines. The present workshop proceedings illustrates a continued trend toward a more unified view of rotordynamic instability problems and several encouraging new analytical developments.

Eighth International Workshop on Laser Ranging Instrumentation

NASA Technical Reports Server (NTRS)

Degnan, John J. (Compiler)

1993-01-01

The Eighth International Workshop for Laser Ranging Instrumentation was held in Annapolis, Maryland in May 1992, and was sponsored by the NASA Goddard Space Flight Center in Greenbelt, Maryland. The workshop is held once every 2 to 3 years under differing institutional sponsorship and provides a forum for participants to exchange information on the latest developments in satellite and lunar laser ranging hardware, software, science applications, and data analysis techniques. The satellite laser ranging (SLR) technique provides sub-centimeter precision range measurements to artificial satellites and the Moon. The data has application to a wide range of Earth and lunar science issues including precise orbit determination, terrestrial reference frames, geodesy, geodynamics, oceanography, time transfer, lunar dynamics, gravity and relativity.

Eddy covariance flux corrections and uncertainties in long-term studies of carbon and energy exchanges

Treesearch

W. J. Massman; X. Lee

2002-01-01

This study derives from and extends the discussions of a US DOE sponsored workshop held on 30 and 31 May, 2000 in Boulder, CO concerning issues and uncertainties related to long-term eddy covariance measurements of carbon and energy exchanges. The workshop was organized in response to concerns raised at the 1999 annual AmeriFlux meeting about the lack of uniformity...

Thermosphere Dynamics Workshop, volume 2

NASA Technical Reports Server (NTRS)

Mayr, H. G. (Editor); Miller, N. J. (Editor)

1986-01-01

Atmospheric observations reported on include recent measurements of thermospherical composition, gas temperatures, auroral emissions, ion-neutral collisional coupling, electric fields, and plasma convection. Theoretical studies reported on include model calculations of thermospherical general circulation, thermospheric tides, thermospheric tidal coupling to the lower atmosphere, interactions between thermospheic chemistry and dynamics and thermosphere-ionosphere coupling processes. The abstracts provide details given in each talk but the figures represent the fundamental information exchanged within the workshop

Simulation of the toxicokinetics of trichloroethylene, methylene chloride, styrene and n-hexane by a toxicokinetics/toxicodynamics model using experimental data.

PubMed

Nakayama, Yumiko; Kishida, Fumio; Nakatsuka, Iwao; Matsuo, Masatoshi

2005-01-01

The toxicokinetics/toxicodynamics (TKTD) model simulates the toxicokinetics of a chemical based on physiological data such as blood flow, tissue partition coefficients and metabolism. In this study, Andersen and Clewell's TKTD model was used with seven compartments and ten differential equations for calculating chemical balances in the compartments (Andersen and Clewell 1996, Workshop on physiologically-based pharmacokinetic/pharmacodynamic modeling and risk assessment, Aug. 5-16 at Colorado State University, U.S.A) . Using this model, the authors attempted to simulate the behavior of four chemicals: trichloroethylene, methylene chloride, styrene and n-hexane, and the results were evaluated. Simulations of the behavior of trichloroethylene taken in via inhalation and oral exposure routes were also done. The differences between simulations and measurements are due to the differences between the absorption rates of the exposure routes. By changing the absorption rates, the simulation showed agreement with the measured values. The simulations of the other three chemicals showed good results. Thus, this model is useful for simulating the behavior of chemicals for preliminary toxicity assessment.

Tube wall temperature monitoring technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granton, R.L.

1985-07-01

In 1977, Monsanto and Conoco undertook the construction of a new, modern technology ethylene plant at Chocolate Bayou, near Alvin, Texas. This plant included high severity cracking furnaces with potential tube wall temperatures considerably higher than any we had previously experienced. Furnace on-stream time between decokes, a factor in the economics of plant operation, was limited by tube wall temperature, thus requiring its accurate knowledge. Earlier work with other ethylene furnaces had also demonstrated our lack of knowledge concerning high temperature measurements in a furnace firebox environment. This had to change. An outside consultant was called upon to provide amore » threeday workshop on radiant tube temperature sensing. The workshop consisted of two days of formal training in the theory and practice of temperature measurement and one day of field training. This workshop was conducted at a site away from the plant. Approximately 20 engineers (manufacturing and technical groups) attended. The major topics covered by this workshop are as follows: radiant tube temperature sensing, radiation situation of radiant tubes, g.a. method: sample calculations, noncontact sensors: methods of specifying and purchasing, thermal imager strategies, calibration of noncontact sensors, avoiding problems with noncontact sensors, optical aids to radiant tube viewing, tube temperature management and its environmental implications, and contact temperature sensors.« less

Solar Cell Calibration and Measurement Techniques

NASA Technical Reports Server (NTRS)

Bailey, Sheila; Brinker, Dave; Curtis, Henry; Jenkins, Phillip; Scheiman, Dave

1997-01-01

The increasing complexity of space solar cells and the increasing international markets for both cells and arrays has resulted in workshops jointly sponsored by NASDA, ESA and NASA. These workshops are designed to obtain international agreement on standardized values for the AMO spectrum and constant, recommend laboratory measurement practices and establish a set of protocols for international comparison of laboratory measurements. A working draft of an ISO standard, WDI 5387, 'Requirements for Measurement and Calibration Procedures for Space Solar Cells' was discussed with a focus on the scope of the document, a definition of primary standard cell, and required error analysis for all measurement techniques. Working groups addressed the issues of Air Mass Zero (AMO) solar constant and spectrum, laboratory measurement techniques, and the international round robin methodology. A summary is presented of the current state of each area and the formulation of the ISO document.

Solar Cell Calibration and Measurement Techniques

NASA Technical Reports Server (NTRS)

Bailey, Sheila; Brinker, Dave; Curtis, Henry; Jenkins, Phillip; Scheiman, Dave

2004-01-01

The increasing complexity of space solar cells and the increasing international markets for both cells and arrays has resulted in workshops jointly sponsored by NASDA, ESA and NASA. These workshops are designed to obtain international agreement on standardized values for the AMO spectrum and constant, recommend laboratory measurement practices and establish a set of protocols for international comparison of laboratory measurements. A working draft of an ISO standard, WD15387, "Requirements for Measurement and Calibration Procedures for Space Solar Cells" was discussed with a focus on the scope of the document, a definition of primary standard cell, and required error analysis for all measurement techniques. Working groups addressed the issues of Air Mass Zero (AMO) solar constant and spectrum, laboratory measurement techniques, and te international round robin methodology. A summary is presented of the current state of each area and the formulation of the ISO document.

Shared Decision Making in Common Chronic Conditions: Impact of a Resident Training Workshop.

PubMed

Simmons, Leigh; Leavitt, Lauren; Ray, Alaka; Fosburgh, Blair; Sepucha, Karen

2016-01-01

Physicians must be competent in several different kinds of communication skills in order to implement shared decision making; however, these skills are not part of routine medical student education, nor are they formally taught during residency training. We developed a 1- and 2-hour workshop curriculum for internal medicine residents to promote shared decision making in treatment decisions for four common chronic conditions: diabetes, depression, hypertension, and hyperlipidemia. The workshops included a written case exercise, a short didactic presentation on shared decision-making concepts and strategies for risk communication, and two role-playing exercises focused on decision making for depression and hyperlipidemia treatment. We delivered the workshop as a required component of the resident curriculum in ambulatory medicine. To evaluate the impact of the workshop, we used written course evaluations, tracked the use of the newly introduced Decision Worksheets, and asked preceptors to perform direct observation of treatment decision conversations. Residents were involved in the development of the workshop and helped identify key content, suggested framing for difficult topics, and confirmed the need for the skills workshop. One hundred thirty internal medicine and medicine-pediatrics residents attended 8 workshops over a 4-month period. In written cases completed before the workshop, the majority of residents indicated that they would discuss medications, but few mentioned other treatment options or documented patients' goals and preferences in a sample encounter note with a patient with new depression symptoms. Overall, most participants (89.7%) rated the workshop as excellent or very good, and 93.5% said that they would change their practice based on what they learned. Decision Worksheets addressing diabetes, depression, hyperlipidemia, and hypertension were available on a primary care-focused intranet site and were downloaded almost 1,200 times in the first 8 months following the workshops. Preceptors were able to observe only one consult during which one of the four topics was discussed. Internal medicine residents had considerable gaps in shared decision-making skills as measured in a baseline written exercise. Residents provided valuable contributions to the development of a Decision Worksheet to be used at the point of care. Participants rated the skills workshop highly, though interns rated the exercise more useful than PGY-2 and PGY-3 residents did. The Decision Worksheets were accessed often following the sessions; however, observing the Decision Worksheets in use in real time was a challenge in the resident-faculty clinic. Additional studies are warranted to examine whether the workshop was successful in increasing residents' ability to implement skills in practice.

Tumuli and tubes: Teaching scientific techniques

NASA Technical Reports Server (NTRS)

Tatsumura, Michelle J.; Taylor, G. J.; Mouginis-Mark, P. J.

1993-01-01

Planetary and space science is the best way to teach basic chemistry, physics, and math. Einstein once said that 'man is drawn to the mysterious and it is from that that we achieve true art and science.' Planets and the processes that shape them are especially mysterious and fascinating to students, young and old, and because of this planetary geology kindles interest that draws them further into the world of science. At the very least, they are engaged enough to learn how science works, a key ingredient in scientific literacy. A project involving field measurements on Kilauea volcano, Hawaii, by a Geology 101 honors class is described. Hawaii is blessed with spectacular, active, accessible, and relatively safe basaltic eruptions. The study of volcanoes, the landforms they produce, and the processes that operate on and in volcanoes, combined with the study of volcanoes on the other planets, is an excellent way to link aspects of Hawaiian geology to the planets. During the past year we have taken advantage of our setting to organize a NASA field workshop for junior investigators and senior graduate students, made field trips and planetary volcanism the centerpieces of our annual Summer Workshop for Teachers, and led a field trip around Kilauea Volcano during the Challenger Center Faculty Development conference, held on the island of Hawaii last summer. An activity for the honors Geology 101 class (all undergraduates) at the University of Hawaii is presently being planned. Our goal is to give them some hands on experience working on a field project and applying what they have learned to planetary volcanoes. The work will include qualitative observations and quantitative measurements on volcanic lava flows. Follow-up activities will involve data analysis. The trip requires planning (at least 3 months before hand) everything from accommodations and insurance to the actual activities we will be doing. Our goal is to stimulate interest and awareness in the students' surroundings, in this case, volcanoes, and to include planetary applications and how studies of terrestrial geology greatly aids studies of the other planets. Two studies are planned both of which are active research projects being conducted by the authors. These projects, tumuli in pahoehoe flow fileds and lava tube cross-secational areas, are described.

Feasibility of scenario-based simulation training versus traditional workshops in continuing medical education: a randomized controlled trial.

PubMed

Kerr, Brendan; Hawkins, Trisha Lee-Ann; Herman, Robert; Barnes, Sue; Kaufmann, Stephanie; Fraser, Kristin; Ma, Irene W Y

2013-07-18

Although simulation-based training is increasingly used for medical education, its benefits in continuing medical education (CME) are less established. This study seeks to evaluate the feasibility of incorporating simulation-based training into a CME conference and compare its effectiveness with the traditional workshop in improving knowledge and self-reported confidence. Participants (N=27) were group randomized to either a simulation-based workshop or a traditional case-based workshop. Post-training, knowledge assessment score neither did increase significantly in the traditional group (d=0.13; p=0.76) nor did significantly decrease in the simulation group (d= - 0.44; p=0.19). Self-reported comfort in patient assessment parameters increased in both groups (p<0.05 in all). However, only the simulation group reported an increase in comfort in patient management (d=1.1, p=0.051 for the traditional group and d=1.3; p= 0.0003 for the simulation group). At 1 month, comfort measures in the traditional group increased consistently over time while these measures in the simulation group increased post-workshop but decreased by 1 month, suggesting that some of the effects of training with simulation may be short lived. The use of simulation-based training was not associated with benefits in knowledge acquisition, knowledge retention, or comfort in patient assessment. It was associated with superior outcomes in comfort in patient management, but this benefit may be short-lived. Further studies are required to better define the conditions under which simulation-based training is beneficial.

Feasibility of scenario-based simulation training versus traditional workshops in continuing medical education: a randomized controlled trial

PubMed Central

Kerr, Brendan; Hawkins, Trisha Lee-Ann; Herman, Robert; Barnes, Sue; Kaufmann, Stephanie; Fraser, Kristin; Ma, Irene W. Y.

2013-01-01

Introduction Although simulation-based training is increasingly used for medical education, its benefits in continuing medical education (CME) are less established. This study seeks to evaluate the feasibility of incorporating simulation-based training into a CME conference and compare its effectiveness with the traditional workshop in improving knowledge and self-reported confidence. Methods Participants (N=27) were group randomized to either a simulation-based workshop or a traditional case-based workshop. Results Post-training, knowledge assessment score neither did increase significantly in the traditional group (d=0.13; p=0.76) nor did significantly decrease in the simulation group (d= − 0.44; p=0.19). Self-reported comfort in patient assessment parameters increased in both groups (p<0.05 in all). However, only the simulation group reported an increase in comfort in patient management (d=1.1, p=0.051 for the traditional group and d=1.3; p= 0.0003 for the simulation group). At 1 month, comfort measures in the traditional group increased consistently over time while these measures in the simulation group increased post-workshop but decreased by 1 month, suggesting that some of the effects of training with simulation may be short lived. Discussion The use of simulation-based training was not associated with benefits in knowledge acquisition, knowledge retention, or comfort in patient assessment. It was associated with superior outcomes in comfort in patient management, but this benefit may be short-lived. Further studies are required to better define the conditions under which simulation-based training is beneficial. PMID:23870304

Feasibility of scenario-based simulation training versus traditional workshops in continuing medical education: a randomized controlled trial.

PubMed

Kerr, Brendan; Lee-Ann Hawkins, Trisha; Herman, Robert; Barnes, Sue; Kaufmann, Stephanie; Fraser, Kristin; Ma, Irene W Y

2013-01-01

Introduction Although simulation-based training is increasingly used for medical education, its benefits in continuing medical education (CME) are less established. This study seeks to evaluate the feasibility of incorporating simulation-based training into a CME conference and compare its effectiveness with the traditional workshop in improving knowledge and self-reported confidence. Methods Participants (N=27) were group randomized to either a simulation-based workshop or a traditional case-based workshop. Results Post-training, knowledge assessment score neither did increase significantly in the traditional group (d=0.13; p=0.76) nor did significantly decrease in the simulation group (d= - 0.44; p=0.19). Self-reported comfort in patient assessment parameters increased in both groups (p<0.05 in all). However, only the simulation group reported an increase in comfort in patient management (d=1.1, p=0.051 for the traditional group and d=1.3; p= 0.0003 for the simulation group). At 1 month, comfort measures in the traditional group increased consistently over time while these measures in the simulation group increased post-workshop but decreased by 1 month, suggesting that some of the effects of training with simulation may be short lived. Discussion The use of simulation-based training was not associated with benefits in knowledge acquisition, knowledge retention, or comfort in patient assessment. It was associated with superior outcomes in comfort in patient management, but this benefit may be short-lived. Further studies are required to better define the conditions under which simulation-based training is beneficial.

Conducting and Evaluating Stakeholder Workshops to Facilitate Updates to a Storm Surge Forecasting Model for Coastal Louisiana

NASA Astrophysics Data System (ADS)

DeLorme, D.; Lea, K.; Hagen, S. C.

2016-12-01

As coastal Louisiana evolves morphologically, ecologically, and from engineering advancements, there is a crucial need to continually adjust real-time forecasting and coastal restoration planning models. This presentation discusses planning, conducting, and evaluating stakeholder workshops to support such an endeavor. The workshops are part of an ongoing Louisiana Sea Grant-sponsored project. The project involves updating an ADCIRC (Advanced Circulation) mesh representation of topography including levees and other flood control structures by applying previously-collected elevation data and new data acquired during the project. The workshops are designed to educate, solicit input, and ensure incorporation of topographic features into the framework is accomplished in the best interest of stakeholders. During this project's first year, three one-day workshops directed to levee managers and other local officials were convened at agricultural extension facilities in Hammond, Houma, and Lake Charles, Louisiana. The objectives were to provide a forum for participants to learn about the ADCIRC framework, understand the importance of accurate elevations for a robust surge model, discuss and identify additional data sources, and become familiar with the CERA (Coastal Emergency Risks Assessment) visualization tool. The workshop structure consisted of several scientific presentations with questions/answer time (ADCIRC simulation inputs and outputs; ADCIRC framework elevation component; description and examples of topographic features such as levees, roadways, railroads, etc. currently utilized in the mesh; ADCIRC model validation demonstration through historic event simulations; CERA demonstration), a breakout activity for participant groups to identify and discuss raised features not currently in the mesh and document them on provided worksheets, and a closing session for debriefing and discussion of future model improvements. Evaluation involved developing, and analyzing a written survey of participants administered at the workshop conclusion. The survey measured satisfaction with the workshop's content, format, and utility and gathered future recommendations. Results showed the workshops were successful and further feedback will be shared in this presentation.

Workshop on Bridging Satellite Climate Data Gaps.

PubMed

Cooksey, Catherine; Datla, Raju

2011-01-01

Detecting the small signals of climate change for the most essential climate variables requires that satellite sensors make highly accurate and consistent measurements. Data gaps in the time series (such as gaps resulting from launch delay or failure) and inconsistencies in radiometric scales between satellites undermine the credibility of fundamental climate data records, and can lead to erroneous analysis in climate change detection. To address these issues, leading experts in Earth observations from National Aeronautics and Space Administration (NASA), National Oceanic and Atmospheric Adminstration (NOAA), United States Geological Survey (USGS), and academia assembled at the National Institute of Standards and Technology on December 10, 2009 for a workshop to prioritize strategies for bridging and mitigating data gaps in the climate record. This paper summarizes the priorities for ensuring data continuity of variables relevant to climate change in the areas of atmosphere, land, and ocean measurements and the recommendations made at the workshop for overcoming planned and unplanned gaps in the climate record.

Measuring the usefulness of family planning job aids following distribution at training workshops.

PubMed

Tumlinson, Katherine; Hubacher, David; Wesson, Jennifer; Lasway, Christine

2010-09-01

A job aid is a tool, such as a flowchart or checklist, that makes it easier for staff to carry out tasks by providing quick access to needed information. Many public health organizations are engaged in the production of job aids intended to improve adherence to important medical guidelines and protocols, particularly in resource-constrained countries. However, some evidence suggests that actual use of job aids remains low. One strategy for improving utilization is the introduction of job aids in training workshops. This paper summarizes the results of two separate evaluations conducted in Uganda and the Dominican Republic (DR) which measured the usefulness of a series of four family planning checklists 7-24 months after distribution in training workshops. While more than half of the health care providers used the checklists at least once, utilization rates were sub-optimal. However, the vast majority of those providers who utilized the checklists found them to be very useful in their work.

Improving Dairy Organizational Communication from the Veterinarian's Perspective: Results of a Continuing Veterinary Medical Education Pilot Program.

PubMed

Moore, Dale A; Sischo, William M; Kurtz, Suzanne; Siler, Julie D; Pereira, Richard V; Warnick, Lorin D; Davis, Margaret A

2016-01-01

The increasing size and complexity of US dairy farms could make it more difficult for a veterinary practitioner to effectively communicate protocol recommendations for prevention or treatment on the farm. A continuing education workshop was set up based on the results of research on dairy organizational communication on dairy farms, which resulted in a tool to assess dairy communication structure and flow. The workshop specifically focused on communication structure and whom to talk to when implementing health care changes in calf rearing. In addition, modern methods of veterinary-client communication knowledge and skills were provided. Primary outcomes of the workshops were to obtain feedback from participants about research findings and the communication model, to improve awareness about the complexity of communication structures on dairy farms, and to change participants' knowledge and skills associated with on-farm communication by providing communication theory and skills and an approach to evaluate and improve dairy organizational communication. Of the 37 participants completing the pre-program assessment, most recognized a need for themselves or their practice to improve communication with clients and farm employees. After the program, most participants were confident in their new communication skills and would consider using them. They highlighted specific new ideas they could apply in practice, such as conducting a "communication audit." The results from the assessment of this communication workshop, focused on dairy veterinarians, highlighted the need for communication training in this sector of the profession and practitioners' desire to engage in this type of training.

Improving Dairy Organizational Communication from the Veterinarian's Perspective: Results of a Continuing Veterinary Medical Education Pilot Program

PubMed Central

Moore, Dale A.; Sischo, William M.; Kurtz, Suzanne; Siler, Julie D.; Pereira, Richard V.; Warnick, Lorin D.; Davis, Margaret A.

2016-01-01

The increasing size and complexity of US dairy farms could make it more difficult for a veterinary practitioner to effectively communicate protocol recommendations for prevention or treatment on the farm. A continuing education workshop was set up based on the results of research on dairy organizational communication on dairy farms, which resulted in a tool to assess dairy communication structure and flow. The workshop specifically focused on communication structure and whom to talk to when implementing health care changes in calf rearing. In addition, modern methods of veterinary–client communication knowledge and skills were provided. Primary outcomes of the workshops were to obtain feedback from participants about research findings and the communication model, to improve awareness about the complexity of communication structures on dairy farms, and to change participants' knowledge and skills associated with on-farm communication by providing communication theory and skills and an approach to evaluate and improve dairy organizational communication. Of the 37 participants completing the pre-program assessment, most recognized a need for themselves or their practice to improve communication with clients and farm employees. After the program, most participants were confident in their new communication skills and would consider using them. They highlighted specific new ideas they could apply in practice, such as conducting a “communication audit”. The results from the assessment of this communication workshop, focused on dairy veterinarians, highlighted the need for communication training in this sector of the profession and practitioners' desire to engage in this type of training. PMID:26751909

Aerosol Remote Sensing From Space

NASA Astrophysics Data System (ADS)

Kokhanovsky, A.; Kinne, S.

2010-01-01

Determination of Atmospheric Aerosol Properties Using Satellite Measurements;Bad Honnef, Germany, 16-19 August 2009; Aerosol optical depth (AOD), a measure of how much light is attenuated by aerosol particles, provides scientists information about the amount and type of aerosols in the atmosphere. Recent developments in aerosol remote sensing was the theme of a workshop held in Germany. The workshop was sponsored by the Wilhelm and Else Heraeus Foundation and attracted 67 participants from 12 countries. The workshop focused on the determination (retrieval) of AOD and its spectral dependence using measurements of changes to the solar radiation back-scattered to space. The midvisible AOD is usually applied to define aerosol amount, while the size of aerosol particles is indicated by the AOD spectral dependence and is commonly expressed by the Angstrom parameter. Identical properties retrieved by different sensors, however, display significant diversity, especially over continents. A major reason for this is that the derivation of AOD requires more accurate determination of nonaerosol contributions to the sensed satellite signal than is usually available. In particular, surface reflectance data as a function of the viewing geometry and robust cloud-clearing methods are essential retrieval elements. In addition, the often needed assumptions about aerosol properties in terms of absorption and size are more reasons for the discrepancy between different AOD measurements.

Strengthening individual capacity in monitoring and evaluation of malaria control programmes to streamline M&E systems and enhance information use in malaria endemic countries.

PubMed

Garley, Ashley; Eckert, Erin; Sie, Ali; Ye, Maurice; Malm, Keziah; Afari, Edwin A; Sawadogo, Mamadou; Herrera, Samantha; Ivanovich, Elizabeth; Ye, Yazoume

2016-05-28

Malaria control interventions in most endemic countries have intensified in recent years and so there is a need for a robust monitoring and evaluation (M&E) system to measure progress and achievements. Providing programme and M&E officers with the appropriate skills is a way to strengthen malaria's M&E systems and enhance information use for programmes' implementation. This paper describes a recent effort in capacity strengthening for malaria M&E in sub-Saharan Africa (SSA). From 2010 to 2014, capacity-strengthening efforts consisted of organizing regional in-person workshops for M&E of malaria programmes for Anglophone and Francophone countries in SSA in collaboration with partners from Ghana and Burkina Faso. Open-sourced online courses were also available in English. A post-workshop assessment was conducted after 5 years to assess the effects of these regional workshops and identify gaps in capacity. The regional workshops trained 181 participants from 28 countries from 2010 to 2014. Trained participants were from ministries of health, national malaria control and elimination programmes, non-governmental organizations, and development partners. The average score (%) for participants' knowledge tests increased from pretest to posttest for Anglophone workshops (2011: 59 vs. 76, 2012: 41 vs. 63, 2013: 51 vs. 73; 2014: 50 vs. 74). Similarly, Francophone workshop posttest scores increased, but were lower than Anglophone due to higher scores at pretest. (2011: 70 vs. 76, 2012: 74 vs. 79, 2013: 61 vs. 68; 2014: 64 vs. 75). Results of the post-workshop assessment revealed that participants retained practical M&E knowledge and skills for malaria programs, but there is a need for a module on malaria surveillance adapted to the pre-elimination context. The workshops were successful because of the curriculum content, facilitation quality, and the engagement of partner institutions with training expertise. Results from the post-workshop assessment will guide the curriculum's development and restructuring for the next phase of workshops. Country-specific malaria M&E capacity needs assessments may also inform this process as countries reduce malaria burden.

Nuclear Data Needs and Capabilities for Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, D.

2015-05-27

In July 2014, DOE NP carried out a review of the US Nuclear Data Program. This led to several recommendations, including that the USNDP should “devise effective and transparent mechanisms to solicit input and feedback from all stakeholders on nuclear data needs and priorities.” The review also recommended that USNDP pursue experimental activities of relevance to nuclear data; the revised 2014 Mission Statement accordingly states that the USNDP uses “targeted experimental studies” to address gaps in nuclear data. In support of these recommendations, DOE NP requested that USNDP personnel organize a Workshop on Nuclear Data Needs and Capabilities for Applicationsmore » (NDNCA). This Workshop was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goal of the NDNCA Workshop was to compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for the required measurements. The first two days of the workshop consisted of 25 plenary talks by speakers from 16 different institutions, on nuclear energy (NE), national security (NS), isotope production (IP), and industrial applications (IA). There were also shorter “capabilities” talks that described the experimental facilities and instrumentation available for the measurement of nuclear data. This was followed by a third day of topic-specific “breakout” sessions and a final closeout session. The agenda and copies of these talks are available online at http://bang.berkeley.edu/events/NDNCA/agenda. The importance of nuclear data to both basic and applied nuclear science was reflected in the fact that while the impetus for the workshop arose from the 2014 USNDP review, joint sponsorship for the workshop was provided by the Nuclear Science and Security Consortium, a UC-Berkeley based organization funded by the National Nuclear Security Administration (NNSA).« less

MUCESS-Supported Ozone Studies in Upstate New York and along the Texas Gulf Coast

NASA Astrophysics Data System (ADS)

Hromis, A.; Balimuttajjo, M.; Johnson, A.; Wright, J. M.; Idowu, A.; Vieyra, D.; Musselwhite, D.; Morris, P. A.

2010-12-01

The Minority University Consortium for Earth and Space Sciences (MUCESS) supports yearly atmospheric science workshops at their respective institutions. The NSF funded program has enabled Universities and colleges that are part of MUCESS, which include Medgar Evers College, City University of NY, University of Houston-Downtown and South Carolina State University, to develop and support atmospheric studies. The goal of the annual workshops is to instruct the students on the basics of atmospheric science and provide them with hands-on experience for preparing and calibrating the instruments for measuring atmospheric parameters. The instruments are subsequently attached to weather balloons. The data is obtained with an ENSCI ECC ozonesonde, which measures ozone concentrations to parts per billion, and an iMET radiosonde, which records temperature, pressure, relative humidity, and GPS altitude and position. In March 2010, Medgar Evers hosted the workshop in Paradox, NY. Students and faculty from the three institutions attended the 3 day workshop. Subsequent to the annual workshop students from the University of Houston-Downtown (UHD) launched a series of four Sunday launches during the summer from the campus. The data from both the workshop and UHD launches was subsequently analyzed to compare ozone profiles within the troposphere and stratosphere. Comparing rural (Paradox, NY) and urban ozone profiles (Houston, Tx) provides an invaluable experience. An excellent example is the March Paradox temperature profiles as the data indicates a mid-tropospheric temperature inversion. Coincident with this inversion, there is a significant rise in ozone concentrations, the source of which is likely of non-local provenance. In contrast, the Houston summer data indicates a different story as ground level ozone is produced by industrial and transportation-related ozone sources levels which vary. Weekend ground level ozone levels on Sunday are usually relatively low because of decreased traffic, but with the raise in altitude, higher levels may be recorded that represent weekday levels.

The Buried in Treasures Workshop: waitlist control trial of facilitated support groups for hoarding.

PubMed

Frost, Randy O; Ruby, Dylan; Shuer, Lee J

2012-11-01

Hoarding is a serious form of psychopathology that has been associated with significant health and safety concerns, as well as the source of social and economic burden (Tolin, Frost, Steketee, & Fitch, 2008; Tolin, Frost, Steketee, Gray, & Fitch, 2008). Recent developments in the treatment of hoarding have met with some success for both individual and group treatments. Nevertheless, the cost and limited accessibility of these treatments leave many hoarding sufferers without options for help. One alternative is support groups that require relatively few resources. Frost, Pekareva-Kochergina, and Maxner (2011) reported significant declines in hoarding symptoms following a non-professionally run 13-week support group (The Buried in Treasures [BIT] Workshop). The BIT Workshop is a highly structured and short term support group. The present study extended these findings by reporting on the results of a waitlist control trial of the BIT Workshop. Significant declines in all hoarding symptom measures were observed compared to a waitlist control. The treatment response rate for the BIT Workshop was similar to that obtained by previous individual and group treatment studies, despite its shorter length and lack of a trained therapist. The BIT Workshop may be an effective adjunct to cognitive behavior therapy for hoarding disorder, or an alternative when cognitive behavior therapy is inaccessible. Copyright © 2012 Elsevier Ltd. All rights reserved.

SeaWiFS technical report series. Volume 5: Ocean optics protocols for SeaWiFS validation

NASA Technical Reports Server (NTRS)

Mueller, James L.; Austin, Roswell W.; Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor)

1992-01-01

Protocols are presented for measuring optical properties, and other environmental variables, to validate the radiometric performance of the Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and to develop and validate bio-optical algorithms for use with SeaWiFS data. The protocols are intended to establish foundations for a measurement strategy to verify the challenging SeaWiFS accuracy goals of 5 percent in water-leaving radiances and 35 percent in chlorophyll alpha concentration. The protocols first specify the variables which must be measured, and briefly review rationale. Subsequent chapters cover detailed protocols for instrument performance specifications, characterizing and calibration instruments, methods of making measurements in the field, and methods of data analysis. These protocols were developed at a workshop sponsored by the SeaWiFS Project Office (SPO) and held at the Naval Postgraduate School in Monterey, California (9-12 April, 1991). This report is the proceedings of that workshop, as interpreted and expanded by the authors and reviewed by workshop participants and other members of the bio-optical research community. The protocols are a first prescription to approach unprecedented measurement accuracies implied by the SeaWiFS goals, and research and development are needed to improve the state-of-the-art in specific areas. The protocols should be periodically revised to reflect technical advances during the SeaWiFS Project cycle.

Informal Workshop on Burial and Mobility Modeling of Munitions in the Underwater Environment

DTIC Science & Technology

2014-12-01

Respondents should be aware that notwithstanding any other provision of law , no person shall be subject to any penalty for failing to comply with a...responsible for munitions mobility including transport , burial, and re- exposure. A set of field experiments is being performed to characterize the...Motion, Transport , and Fate of Underwater Munitions under Waves, Currents, and Combined-Flows – PI: Dr. Marcelo Garcia, University of Illinois at

Providing Total Quality Fundamentals: 1995 Workshops for the NASA Lewis Research Center's Technical Services Directorate

NASA Technical Reports Server (NTRS)

Antczak, Paul; Jacinto,Gilda; Simek, Jimmy

1997-01-01

The National Aeronautics and Space Administration's (NASA) agency-wide movement to cultivate a quality workplace is the basis for Lewis Research Center to implement Total Quality Fundamentals (TQF) initiatives. The Lewis Technical Services Directorate (TSD) introduced the Total Quality Fundamentals (TQF) workshops to its work force as an opportunity to introduce the concepts and principles of TQF. These workshops also provided the participants with the opportunity to dialogue with fellow TSD employees and managers. This report describes, through the perspective of the Lewis TSD TQF Coaches, how the TQF work- shop process was accomplished in TSD. It describes the structure for addressing the need, implementation process, input the TSD Coaches provided, common themes and concerns raised, conclusions, and recommendations. The Coaches concluded that these types of workshops could be the key to open the communication channels that are necessary to help everyone at Lewis understand where they fit in the organization. TQF workshops can strengthen the participant's connection with the Mission, Vision of the Center, and Vision of the Agency. Reconunendations are given based on these conclusions that can help the TSD Quality Board develop attainable measures towards a quality workplace.

Evaluating impact of a multi-dimensional education programme on perceived performance of primary care professionals in diabetes care.

PubMed

Parekh, Sanjoti; Bush, Robert; Cook, Susan; Grant, Phillipa

2015-11-01

The purpose of this study is to evaluate an educational programme, 'Diabetes Connect: Connecting Professions', which was developed to enhance communication across primary care networks, to support best practice in clinical interventions and progress multidisciplinary team work to benefit patients in diabetes care. A total of 26 workshops were successfully delivered for 309 primary care professionals across the state of Queensland in Australia from November 2011. It consists of two separate, but complementary training elements: a series of online clinical education training modules and state-wide interprofessional learning workshops developed to enhance professional competencies. The evaluation design included completion of online surveys by the participants at two time points: first upon registering for the online modules or workshops; second, one week after attending a workshop. The survey included questions to evaluate the change in role performance measures. Overall, significant increases in participants' current knowledge, perceived ability to adopt this knowledge at work and willingness to change professional behaviour in the short term were observed. The study suggests that for maximum benefit both, workshop and online training, should be combined and made available widely. Future programmes should use a randomised trial design to test the delivery model.

Impact of a Workshop About Aging on the Empathy Scores of Pharmacy and Medical Students

PubMed Central

Fjortoft, Nancy; Hojat, Mohammadreza

2012-01-01

Objective. To measure changes in pharmacy and medical students’ empathy scores after a 40-minute workshop during which students observed and discussed a theatrical performance about the challenges of aging. Methods. First-year pharmacy and medical students (n = 187 and n = 183, respectively) participating in the workshop observed and discussed a 10-minute performance in which students enacted problems and concerns faced by elderly patients. The Jefferson Scale of Empathy (JSE) was administered just prior to the workshop (pretest), immediately afterward (posttest 1), and 7 or 26 days afterward (posttest 2). Results. Empathy increased significantly from pretest to posttest 1 for students of each profession (p <0.01). Improvement in empathy scores declined by the time the JSE was readministered to pharmacy students 7 days later and to medical students 26 days later (posttest 2). Similar patterns of improved and declining empathy were found when the data were analyzed by gender and medical student specialty interest (ie, primary vs non-primary care specialties). Conclusion. Empathy scores increased but were not sustained for both pharmacy and medical students after a brief workshop on aging that required limited personnel resources. PMID:22412208

Building groundwater modeling capacity in Mongolia

USGS Publications Warehouse

Valder, Joshua F.; Carter, Janet M.; Anderson, Mark T.; Davis, Kyle W.; Haynes, Michelle A.; Dorjsuren Dechinlhundev,

2016-06-16

Ulaanbaatar, the capital city of Mongolia (fig. 1), is dependent on groundwater for its municipal and industrial water supply. The population of Mongolia is about 3 million people, with about one-half the population residing in or near Ulaanbaatar (World Population Review, 2016). Groundwater is drawn from a network of shallow wells in an alluvial aquifer along the Tuul River. Evidence indicates that current water use may not be sustainable from existing water sources, especially when factoring the projected water demand from a rapidly growing urban population (Ministry of Environment and Green Development, 2013). In response, the Government of Mongolia Ministry of Environment, Green Development, and Tourism (MEGDT) and the Freshwater Institute, Mongolia, requested technical assistance on groundwater modeling through the U.S. Army Corps of Engineers (USACE) to the U.S. Geological Survey (USGS). Scientists from the USGS and USACE provided two workshops in 2015 to Mongolian hydrology experts on basic principles of groundwater modeling using the USGS groundwater modeling program MODFLOW-2005 (Harbaugh, 2005). The purpose of the workshops was to bring together representatives from the Government of Mongolia, local universities, technical experts, and other key stakeholders to build in-country capacity in hydrogeology and groundwater modeling.A preliminary steady-state groundwater-flow model was developed as part of the workshops to demonstrate groundwater modeling techniques to simulate groundwater conditions in alluvial deposits along the Tuul River in the vicinity of Ulaanbaatar. ModelMuse (Winston, 2009) was used as the graphical user interface for MODFLOW for training purposes during the workshops. Basic and advanced groundwater modeling concepts included in the workshops were groundwater principles; estimating hydraulic properties; developing model grids, data sets, and MODFLOW input files; and viewing and evaluating MODFLOW output files. A key to success was developing in-country technical capacity and partnerships with the Mongolian University of Science and Technology; Freshwater Institute, Mongolia, a non-profit organization; United Nations Educational, Scientific and Cultural Organization (UNESCO); the Government of Mongolia; and the USACE.

Estimating tree biomass regressions and their error, proceedings of the workshop on tree biomass regression functions and their contribution to the error

Treesearch

Eric H. Wharton; Tiberius Cunia

1987-01-01

Proceedings of a workshop co-sponsored by the USDA Forest Service, the State University of New York, and the Society of American Foresters. Presented were papers on the methodology of sample tree selection, tree biomass measurement, construction of biomass tables and estimation of their error, and combining the error of biomass tables with that of the sample plots or...

Back to the basics: Birmingham, Alabama, measurement and scale

USGS Publications Warehouse

Handley, L.R.; Lockwood, C.M.; Handley, N.

2005-01-01

Back to the Basics: Birmingham, Alabama is the fourth in a series of workshops that focus on teaching foundational map reading and spatial differentiation skills. It is the second published exercise from the Back to the Basics series developed by the Wetland Education through Maps and Aerial Photography (WETMAAP) Program (see Journal of Geography 103, 5: 226-230). Like its predecessor, the current exercise is modified from the Birmingham Back to the Basics workshop offered during the annual National Council for Geographic Education meeting. The focus of this exercise is on scale and measurement, foundational skills for spatial thinking and analysis. ?? 2005 National Council for Geographic Education.

Global Precipitation Measurement. Report 1; Summary of the First GPM Partners Planning Workshop

NASA Technical Reports Server (NTRS)

Shepherd, J. Marshall; Mehta, Amita; Smith, Eric A. (Editor); Adams, W. James (Editor)

2002-01-01

This report provides a synopsis of the proceedings of the First Global Precipitation Measurement (GPM) Partners Planning Workshop held at the University of Maryland, College Park, from May 16 to 18, 2001. GPM consists of a multi-member global satellite constellation (i.e., an international set of satellite missions) and the accompanying scientific research program, with the main goal of providing frequent, accurate, and globally distributed precipitation measurements essential in understanding several fundamental issues associated with the global water and energy cycle (GWEC). The exchange of scientific and technical information at this and subsequent GPM workshops between representatives from around the world represents a key step in the formulation phase of GPM mission development. The U.S. National Aeronautics and Space Agency (NASA), the National Space Development Agency of Japan (NASDA), and other interested agencies from nations around the world seek to observe, understand, and model the Earth system to learn how it is changing and what consequences these changes have on life, particularly as they pertain to hydrological processes and the availability of fresh water resources. GWEN processes are central to a broader understanding of the Earth system.

[Emission characteristics and safety evaluation of volatile organic compounds in manufacturing processes of automotive coatings].

PubMed

Zeng, Pei-Yuan; Li, Jian-Jun; Liao, Dong-Qi; Tu, Xiang; Xu, Mei-Ying; Sun, Guo-Ping

2013-12-01

Emission characteristics of volatile organic compounds (VOCs) were investigated in an automotive coating manufacturing enterprise. Air samples were taken from eight different manufacturing areas in three workshops, and the species of VOCs and their concentrations were measured by gas chromatography-mass spectrometry (GC-MS). Safety evaluation was also conducted by comparing the concentration of VOCs with the permissible concentration-short term exposure limit (PC-STEL) regulated by the Ministry of Health. The results showed that fifteen VOCs were detected in the indoor air of the automotive coatings workshop, including benzene, toluene, ethylbenzene, xylene, ethyl acetate, butyl acetate, methyl isobutyl ketone, propylene glycol monomethyl ether acetate, trimethylbenzene and ethylene glycol monobutyl ether, Their concentrations widely ranged from 0.51 to 593.14 mg x m(-3). The concentrations of TVOCs were significantly different among different manufacturing processes. Even in the same manufacturing process, the concentrations of each component measured at different times were also greatly different. The predominant VOCs of indoor air in the workshop were identified to be ethylbenzene and butyl acetate. The concentrations of most VOCs exceeded the occupational exposure limits, so the corresponding control measures should be taken to protect the health of the workers.

Light Water Reactor Sustainability (LWRS) Program – Non-Destructive Evaluation (NDE) R&D Roadmap for Determining Remaining Useful Life of Aging Cables in Nuclear Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simmons, K.L.; Ramuhali, P.; Brenchley, D.L.

2012-09-01

Executive Summary [partial] The purpose of the non-destructive evaluation (NDE) R&D Roadmap for Cables is to support the Materials Aging and Degradation (MAaD) R&D pathway. A workshop was held to gather subject matter experts to develop the NDE R&D Roadmap for Cables. The focus of the workshop was to identify the technical gaps in detecting aging cables and predicting their remaining life expectancy. The workshop was held in Knoxville, Tennessee, on July 30, 2012, at Analysis and Measurement Services Corporation (AMS) headquarters. The workshop was attended by 30 experts in materials, electrical engineering, and NDE instrumentation development from the U.S.more » Nuclear Regulatory Commission (NRC), U.S. Department of Energy (DOE) National Laboratories (Oak Ridge National Laboratory, Pacific Northwest National Laboratory, Argonne National Laboratory, and Idaho National Engineering Laboratory), universities, commercial NDE service vendors and cable manufacturers, and the Electric Power Research Institute (EPRI).« less

NASA's Atmospheric Effects of Aviation Project: Results of the August 1999 Aerosol Measurement Intercomparison Workshop, Laboratory Phase

NASA Technical Reports Server (NTRS)

Cofer, W. Randy, III; Anderson, Bruce E.; Connors, V. S.; Wey, C. C.; Sanders, T.; Twohy, C.; Brock, C. A.; Winstead, E. L.; Pui, D.; Chen, Da-Ren

2001-01-01

During August 1-14, 1999, NASA's Atmospheric Effects of Aviation Project (AEAP) convened a workshop at the NASA Langley Research Center to try to determine why such a wide variation in aerosol emissions indices and chemical and physical properties have been reported by various independent AEAP-supported research teams trying to characterize the exhaust emissions of subsonic commercial aircraft. This workshop was divided into two phases, a laboratory phase and a field phase. The laboratory phase consisted of supplying known particle number densities (concentrations) and particle size distributions to a common manifold for the participating research teams to sample and analyze. The field phase was conducted on an aircraft run-up pad. Participating teams actually sampled aircraft exhaust generated by a Langley T-38 Talon aircraft at 1 and 9 m behind the engine at engine powers ranging from 48 to 100 percent. Results from the laboratory phase of this intercomparison workshop are reported in this paper.

Developing an intervention to overcome procrastination.

PubMed

Otermin-Cristeta, Solange; Hautzinger, Martin

2018-01-01

The main goal of this study was the development of a reliable intervention to overcome general procrastination orientated to college students, designed to be used in practical clinical work. The workshops involved six meetings based on behavioral and cognitive techniques, paradox intervention, and psychoeducation. 175 students participated voluntarily. Their procrastination levels were measured in a pretest, post-test, and a 3-month follow-up. After the first interview, the participants were randomly divided into three groups (Intervention A, Intervention B, and a control group with no intervention). There was a significant improvement after the intervention. After 3 months, the average score was still significantly lower than in the pretest, whereas the score of the control group remained unchanged. The participants in Workshop A scored significantly lower in the post-test than the ones in Workshop B. After 3 months, the participants in Workshop B scored significantly lower in the follow up. So both interventions resulted to be effective in reducing procrastination sustainably.

Experimental Investigation of the DLR-F6 Transport Configuration in the National Transonic Facility

NASA Technical Reports Server (NTRS)

Gatlin, Gregory M.; Rivers, Melissa B.; Goodliff, Scott L.; Rudnik, Ralf; Sitzmann, Martin

2008-01-01

An experimental aerodynamic investigation of the DLR (German Aerospace Center) F6 generic transport configuration has been conducted in the NASA NTF (National Transonic Facility) for CFD validation within the framework of the AIAA Drag Prediction Workshop. Force and moment, surface pressure, model deformation, and surface flow visualization data have been obtained at Reynolds numbers of both 3 million and 5 million. Flow-through nacelles and a side-of-body fairing were also investigated on this wing-body configuration. Reynolds number effects on trailing edge separation have been assessed, and the effectiveness of the side-of-body fairing in eliminating a known region of separated flow has been determined. Data obtained at a Reynolds number of 3 million are presented together for comparison with data from a previous wind tunnel investigation in the ONERA S2MA facility. New surface flow visualization capabilities have also been successfully explored and demonstrated in the NTF for the high pressure and moderately low temperature conditions required in this investigation. Images detailing wing surface flow characteristics are presented.

Proceedings: Workshop on the Need for Lightning Observations from Space

NASA Technical Reports Server (NTRS)

Christensen, L. S. (Editor); Frost, W. (Editor); Vaughan, W. W. (Editor)

1979-01-01

The results of the Workshop on the Need for Lightning Observations from Space held February 13-15, 1979, at the University of Tennessee Space Institute, Tullahoma, Tennessee are presented. The interest and active involvement by the engineering, operational, and scientific participants in the workshop demonstrated that lightning observations from space is a goal well worth pursuing. The unique contributions, measurement requirements, and supportive research investigations were defined for a number of important applications. Lightning has a significant role in atmospheric processes and needs to be systematically investigated. Satellite instrumentation specifically designed for indicating the characteristics of lightning are of value in severe storms research, in engineering and operational problem areas, and in providing information on atmospheric electricity and its role in meteorological processes.

Integrating biodefense topics into secondary education curriculum

NASA Astrophysics Data System (ADS)

Dalfrey, Karen E.

Concerns about threats posed by microorganisms found in nature are compounded with the possibility for intentional dissemination. Our vulnerability has increased due to more frequent travel between geographical regions, newly emerging pathogens, changes in terrorist activities, and advances in biotechnology. To increase awareness and global preparedness for threats posed by biological agents, educators need to have access to training and materials to educate the next generation in these issues. To assess what approach would provide educators with the tools necessary to incorporate biodefense related content into their current curricula, secondary education science teachers were surveyed about factors limiting the content of curricula presented in their courses. Results indicate that the most influential barriers to curricula change are time limitations and state mandated exam pressures. Analysis measuring differences in survey responses between two groups of teachers who are separated based on their level of using mandated state objectives to guide their curricula planning indicates that pressures of state mandated exam scores and a general fear of unsuccessful results are determinants for separating teachers into one of these two groups. A teacher training workshop conducive to supporting curricula change was held with the goal of increasing awareness of current threats posed by biological agents and modern biodefense strategies. The workshop was also designed to assist participants in overcoming barriers challenging their ability to incorporate new content into curricula. Participant responses to a post-workshop survey were favorable for measurements of the workshop effectiveness towards diminishing barriers to teacher initiated curricula changes. Respondents reported increased understanding of modern biology, increased realization of the importance of updating curricula with modern knowledge, and increased likeliness of incorporating content from the workshop into current curriculum.

Developing a Communication Curriculum and Workshop for an Internal Medicine Residency Program.

PubMed

Salib, Sherine; Glowacki, Elizabeth M; Chilek, Lindsay A; Mackert, Michael

2015-06-01

Learning effective communication is essential for physicians. Effective communication has been shown to affect healthcare outcomes, including patient safety, adherence rates, patient satisfaction, and enhanced teamwork. The importance of these skills has become even more apparent in recent years, with value-based purchasing programs and federal measures of patient satisfaction in the form of Hospital Consumer Assessment of Healthcare Providers and Systems scores becoming an important part of measuring the performance of a healthcare facility. We conducted a communication workshop for internal medicine residents at the University of Texas. Topics covered included the Acknowledge, Introduce, Duration, Explanation, Thank You framework; managing up; resolving conflicts; error disclosure; new medication and discharge counseling; intercultural communication; understanding Hospital Consumer Assessment of Healthcare Providers and Systems scores; and avoiding burnout. Because it would have been logistically difficult to block whole days for the workshop, the various topics were offered to residents during their regular noon conference hour for several consecutive days. After the workshop, the residents completed an anonymous questionnaire regarding their perception of the importance of various aspects of communication in patient care. The majority of the participating residents perceived the various communication skills explored during the workshop to be highly important in patient care. Concurrently, however, most residents believed that they had initially overestimated their knowledge about these various communication issues. Some demographic differences in the responses also were noted. Our findings demonstrate a needs gap and an area of potential improvement in medical education. We anticipate that with the growing understanding of the importance of communication skills in the healthcare setting, there will be an enhanced role for teaching these skills at all levels of medical education. More studies are needed to further elucidate the specific areas of communication in health care where additional training is necessary.

Participatory Water Resources Modeling in a Water-Scarce Basin (Rio Sonora, Mexico) Reveals Uncertainty in Decision-Making

NASA Astrophysics Data System (ADS)

Mayer, A. S.; Vivoni, E. R.; Halvorsen, K. E.; Kossak, D.

2014-12-01

The Rio Sonora Basin (RSB) in northwest Mexico has a semi-arid and highly variable climate along with urban and agricultural pressures on water resources. Three participatory modeling workshops were held in the RSB in spring 2013. A model of the water resources system, consisting of a watershed hydrology model, a model of the water infrastructure, and groundwater models, was developed deliberatively in the workshops, along with scenarios of future climate and development. Participants were asked to design water resources management strategies by choosing from a range of supply augmentation and demand reduction measures associated with water conservation. Participants assessed water supply reliability, measured as the average daily supply divided by daily demand for historical and future periods, by probing with the climate and development scenarios. Pre- and post-workshop-surveys were developed and administered, based on conceptual models of workshop participants' beliefs regarding modeling and local water resources. The survey results indicate that participants believed their modeling abilities increased and beliefs in the utility of models increased as a result of the workshops. The selected water resources strategies varied widely among participants. Wastewater reuse for industry and aquifer recharge were popular options, but significant numbers of participants thought that inter-basin transfers and desalination were viable. The majority of participants indicated that substantial increases in agricultural water efficiency could be achieved. On average, participants chose strategies that produce reliabilities over the historical and future periods of 95%, but more than 20% of participants were apparently satisfied with reliabilities lower than 80%. The wide range of strategies chosen and associated reliabilities indicate that there is a substantial degree of uncertainty in how future water resources decisions could be made in the region.

Proceedings of the 4th New World Luminescence Dating and Dosimetry Workshop, Denver, Colorado, May 31 June 2, 2006

USGS Publications Warehouse

Wise, Richard A.

2006-01-01

Introduction: Optically stimulated luminescence (OSL) is one of a class of measurements known as stimulated phenomena. Such phenomena may be stimulated thermally or optically and the reader is referred to works by Aitken (1998) and Botter-Jensen and others (2003) for more detail. In recent years OSL has become a popular procedure for the determination of environmental radiation doses absorbed by archeological and geological materials in an attempt to date these materials. The first OSL measurements on quartz and feldspar were made using an argon ion-laser (Huntley et al., 1985). However, the development of cheaper stimulation systems based first on filtered lamps and then on light- emitting diodes (LEDs) (Spooner, et al., 1990; Botter-Jensen, and others, 1999) has led to a massive expansion in OSL dating applications. The abstracts in this volume represent presentations from a workshop held in May-June 2006, at the Denver Federal Center, Denver, Colorado, in which OSL methodologies and applications were summarized and integrated to provide a current synthesis of the OSL science being applied throughout North America. The workshop, sponsored by the U.S. Geological Survey Crustal Imaging and Characterization Team and North Dakota State University, was open to all scientists interested in OSL dating techniques and radiation dosimetry. Participants included thirty-six research scientists and students in geology, archaeology, and physics from the U.S. Geological Survey, Los Alamos National Labs, Kentucky Geological Survey, eight universities in the United States, one university in Canada, one university in India, and Riso National Labs of Denmark. The workshop included two keynote speakers: Dr. Ashok Singhvi (Physical Research Laboratory, Ahmedabad, India) spoke on 'Some Unexplored Methodological Aspects and Some New Applications of Luminescence Dating,' while Dr. Jim Feathers (University of Seattle, WA) spoke on OSL Dating of Sediments From Paleoindian Sites in Brazil. The workshop encouraged everyone to interact more to develop a broader perspective on the types of research and the problems encountered when reporting OSL ages. This meeting follows the first North American Luminescence Dating Workshop held in Tulsa, OK, by Oklahoma State University (2001), in Albuquerque, NM, by Los Alamos National Labs (2002), and in Halifax, Nova Scotia, by Dalhousie University (2004, with a name change to New World Luminescence Dating Workshop). These workshops were interspersed with the international meetings on luminescence that were held in Reno, NV, (2002), and Cologne, Germany; (2005).

Definition and Measures of Individual and Unit Readiness and Family Phenomena Affecting It

DTIC Science & Technology

1991-02-01

deployability (Army task/mission) is a new dimension that emerged from the content analysis of the critical incidents. It assesses whether deployment would be...or were brought up by only one or two workshop participants, we decided to include them anyway in the new , expanded list of dimensions. In that way...incidents. Although the 41 participants in the workshops wrote 172 individual readiness critical incidents, no new dimensions were apparent in the content

Assessment of Techniques for Measuring Tropospheric H Sub x O Sub y

NASA Technical Reports Server (NTRS)

Hoell, J. M. (Editor)

1984-01-01

In its continuing efforts to direct its applications programs towards relevant national needs, NASA is conducting the Tropospheric Chemistry Program, the long-range objective of which is to apply NASA's space technology to assess and predict human impact on the troposphere, particularly on the regional to global scale. One area of required research is instrumentation development, which is aimed at improving the capability to measure important trace gases and aerosols which are key species in the major atmospheric biogeochemical cycles. To focus on specific needs, the Instrumentation Worksphop for H(x)O(y) Tropospheric Species was conducted in August 1982. The workshop discussed current measurement needs and instrument capabilities for H(x)O(y) species, including OH, HO2, and H2O2. The workshop activities and conclusions are documented.

Satellite-Derived Sea Surface Temperature: Workshop-2

NASA Technical Reports Server (NTRS)

Njoku, E. G.

1984-01-01

Global accuracies and error characteristics of presently orbiting satellite sensors are examined. The workshops are intended to lead to a better understanding of present capabilities for sea surface temperature measurement and to improve measurement concepts for the future. Data from the Advanced Very High Resolution Radiometer AVHRR and Scanning Multichannel Microwave Radiometer is emphasized. Some data from the High Resolution Infrared Sounder HIRS and AVHRR are also examined. Comparisons of satellite data with ship and eXpendable BathyThermograph XBT measurement show standard deviations in the range 0.5 to 1.3 C with biases of less than 0.4 C, depending on the sensor, ocean region, and spatial/temporal averaging. The Sea Surface Temperature SST anomaly maps show good agreement in some cases, but a number of sensor related problems are identified.

A Unit-Problem Investigation of Blunt Leading-Edge Separation Motivated by AVT-161 SACCON Research

NASA Technical Reports Server (NTRS)

Luckring, James M.; Boelens, Okko J.

2011-01-01

A research effort has been initiated to examine in more detail some of the challenging flow fields discovered from analysis of the SACCON configuration aerodynamics. This particular effort is oriented toward a diamond wing investigation specifically designed to isolate blunt leading-edge separation phenomena relevant to the SACCON investigations of the present workshop. The approach taken to design this new effort is reviewed along with the current status of the program.

Acquisition Program Transition Workshops: An Element of the DSMC Program Manager Mission Assistance Capability

DTIC Science & Technology

2011-10-01

specific modules as needed. The term “startup” is inclusive of any point in a DoD acquisition program. As noted above, methodology for conducting...Acquisition Sustainment =Decision Point =Milestone Review =Decision Point if PDR is not conducted before Milestone B ProgramA B Initiation) C IOC FOC...start a new program 2.2 Background Conclusions flowing from these observations led the Office of the Secretary of Defense, the De - fense Acquisition

Proceedings of the Shipbuilding Design/Production Integration Workshop held January 18-21, 1981 in Atlanta, Georgia. Volume 1 and 2

DTIC Science & Technology

1981-01-01

Jorud Ralf Ohlin Intershipping Consultants Ltd. Roger Vaughan A&P Appledore Ltd. Paul Wiedenhaefer Grumman Aerospace, Inc. Yoshinobu Ichinose Yukinori...We have high absenteeism which disrupts the flow of production. Our turnover rates are very high , so we don’t have a large pool of experienced...support blocks, etc. Vendor Relations. Both Intershipping and IHI emphasized the impor- tance of good relationships between shipbuilders and vendors

Quantitative Species Measurements in Microgravity Combustion Flames

NASA Technical Reports Server (NTRS)

Silver, Joel A.; Wood, William R.; Chen, Shin-Juh; Dahm, Werner J. A.; Piltch, Nancy D.

2001-01-01

Flame-vortex interactions are canonical configurations that can be used to study the underlying processes occurring in complicated turbulent reacting flows. The elegant simplicity of the flame-vortex interaction permits the study of these complex interactions under relatively controllable experimental configurations, in contrast to direct measurements in turbulent flames. The ability to measure and model the fundamental phenomena that occur in a turbulent flame, but with time and spatial scales which are amenable to our diagnostics, permits significant improvements in the understanding of turbulent combustion under both normal and reduced gravity conditions. In this paper, we report absolute mole fraction measurements of methane in a reacting vortex ring. These microgravity experiments are performed in the 2.2-sec drop tower at NASA Glenn Research Center. In collaboration with Drs. Chen and Dahm at the University of Michigan, measured methane absorbances are incorporated into a new model from which the temperature and concentrations of all major gases in the flame can be determined at all positions and times in the development of the vortex ring. This is the first demonstration of the ITAC (Iterative Temperature with Assumed Chemistry) approach, and the results of these computations and analyses are presented in a companion paper by Dahm and Chen at this Workshop. We believe that the ITAC approach will become a powerful tool in understanding a wide variety of combustion flames under both equilibrium and non-equilibrium conditions.

U.S. Geological Survey Karst Interest Group Proceedings, San Antonio, Texas, May 16–18, 2017

USGS Publications Warehouse

Kuniansky, Eve L.; Spangler, Lawrence E.

2017-05-15

Introduction and AcknowledgmentsKarst aquifer systems are present throughout parts of the United States and some of its territories, and have developed in carbonate rocks (primarily limestone and dolomite) and evaporites (gypsum, anhydrite, and halite) that span an interval of time encompassing more than 550 million years. The depositional environments, diagenetic processes, post-depositional tectonic events, and geochemical weathering processes that form karst aquifers are varied and complex. These factors involve biological, chemical, and physical changes that when combined with the diverse climatic regimes in which karst development has taken place, result in the unique dual- or triple-porosity nature of karst aquifers. These complex hydrogeologic systems typically represent challenging and unique conditions to scientists attempting to study groundwater flow and contaminant transport in these terrains.The dissolution of carbonate rocks and the subsequent development of distinct and beautiful landscapes, caverns, and springs have resulted in the most exceptional karst areas being designated as national or state parks. Tens of thousands of similar areas in the United States have been developed into commercial caverns and known privately owned caves. Both public and private properties provide access for scientists to study the flow of groundwater in situ. Likewise, the range and complexity of landforms and groundwater flow systems associated with karst terrains are enormous, perhaps more than for any other aquifer type. Karst aquifers and landscapes that form in tropical areas, such as the cockpit karst along the north coast of Puerto Rico, differ greatly from karst landforms in more arid climates, such as the Edwards Plateau in west-central Texas or the Guadalupe Mountains near Carlsbad, New Mexico, where hypogenic processes have played a major role in speleogenesis. Many of these public and private lands also contain unique flora and fauna associated with these karst hydrogeologic systems. As a result, numerous federal, state, and local agencies have a strong interest in the study of karst terrains.Many of the major springs and aquifers in the United States have developed in carbonate rocks, such as the Floridan aquifer system in Florida and parts of Alabama, Georgia, and South Carolina; the Ozark Plateaus aquifer system in parts of Arkansas, Kansas, Missouri, and Oklahoma; and the Edwards-Trinity aquifer system in west-central Texas. These aquifers, and the springs that discharge from them, serve as major water-supply sources and form unique ecological habitats. Competition for the water resources of karst aquifers is common, and urban development and the lack of attenuation of contaminants in karst areas due to dissolution features that form direct pathways into karst aquifers can impact the ecosystem and water quality associated with these aquifers.The concept for developing a platform for interaction among scientists within the U.S. Geological Survey (USGS) working on karst-related studies evolved from the November 1999 National Groundwater Meeting of the USGS. As a result, the Karst Interest Group (KIG) was formed in 2000. The KIG is a loose-knit, grass-roots organization of USGS and non-USGS scientists and researchers devoted to fostering better communication among scientists working on, or interested in, karst science. The primary mission of the KIG is to encourage and support interdisciplinary collaboration and technology transfer among scientists working in karst areas. Additionally, the KIG encourages collaborative studies between the different mission areas of the USGS as well as with other federal and state agencies, and with researchers from academia and institutes.To accomplish its mission, the KIG has organized a series of workshops that have been held near nationally important karst areas. To date (2017) seven KIG workshops, including the workshop documented in this report, have been held. The workshops typically include oral and poster sessions on selected karst-related topics and research, as well as field trips to local karst areas. To increase non-USGS participation an effort was made for the workshops to be held at a university or institute beginning with the fourth workshop. Proceedings of the workshops are published by the USGS and are available online at the USGS publications warehouse https://pubs.er.usgs.gov/ by using the search term “karst interest group.”The first KIG workshop was held in St. Petersburg, Florida, in 2001, in the vicinity of the large springs and other karst features of the Floridan aquifer system. The second KIG workshop was held in 2002, in Shepherdstown, West Virginia, in proximity to the carbonate aquifers of the northern Shenandoah Valley, and highlighted an invited presentation on karst literature by the late Barry F. Beck of P.E. LaMoreaux and Associates. The third KIG workshop was held in 2005, in Rapid City, South Dakota, near evaporite karst features in limestones of the Madison Group in the Black Hills of South Dakota. The Rapid City KIG workshop included field trips to Wind Cave National Park and Jewel Cave National Monument, and featured a presentation by Thomas Casadevall, then USGS Central Region Director, on the status of Earth science at the USGS.The fourth KIG workshop in 2008 was hosted by the Hoffman Environmental Research Institute and Center for Cave and Karst Studies at Western Kentucky University in Bowling Green, Kentucky, near Mammoth Cave National Park and karst features of the Chester Upland and Pennyroyal Plateau. The workshop featured a late-night field trip into Mammoth Cave led by Rickard Toomey and Rick Olsen, National Park Service. The fifth KIG workshop in 2011 was a joint meeting of the USGS KIG and University of Arkansas HydroDays, hosted by the Department of Geosciences at the University of Arkansas in Fayetteville. The workshop featured an outstanding field trip to the unique karst terrain along the Buffalo National River in the southern Ozarks, and a keynote presentation on paleokarst in the United States was delivered by Art and Peggy Palmer. The sixth KIG workshop was hosted by the National Cave and Karst Research Institute (NCKRI) in 2014, in Carlsbad, New Mexico. George Veni, Director of the NCKRI, served as a co-chair of the workshop with Eve Kuniansky of the USGS. The workshop featured speaker Dr. Penelope Boston, Director of Cave and Karst Studies at New Mexico Tech, Socorro, and Academic Director at the NCKRI, who addressed the future of karst research. The field trip on evaporite karst of the lower Pecos Valley was led by Lewis Land (NCKRI karst hydrologist), and the field trip on the geology of Carlsbad Caverns National Park was led by George Veni.This current seventh KIG workshop is being held in San Antonio at the University of Texas at San Antonio (UTSA). This 2017 workshop is being hosted by the Department of Geological Sciences’ Student Geological Society (SGS), and student chapters of the American Association of Petroleum Geologists (AAPG) and Association of Engineering Geologists (AEG), with support by the UTSA Department of Geological Sciences and Center for Water Research. The UTSA student chapter presidents, Jose Silvestre (SGS), John Cooper (AAPG), and Tyler Mead (AEG) serve as co-chairs of the 2017 workshop with Eve Kuniansky of the USGS. The technical session committee is chaired by Eve Kuniansky, USGS, and includes Michael Bradley, Tom Byl, Rebecca Lambert, John Lane, and James Kaufmann, all USGS, and Patrick Tucci, retired USGS. The logistics committee includes Amy Clark, Yongli Gao, and Lance Lambert (Department Chair), UTSA Department of Geological Sciences; and Ryan Banta and Allan Clark, USGS, San Antonio, Texas. The field trip committee is chaired by Allan Clark and includes Amy Clark, Yongli Gao, and Keith Muehlestein, UTSA; Marcus Gary, Edwards Aquifer Authority and University of Texas at Austin; Ron Green, Southwest Research Institute; Geary Schindel, Edwards Aquifer Authority; and George Veni, NCKRI. Additionally, two organizations have assisted the UTSA student chapters in hosting the meeting by donating funds to the chapters: the Edwards Aquifer Authority, San Antonio, Texas, and the Barton Springs Edwards Aquifer Authority, Austin, Texas. Additionally, Yongli Gao, Center for Water Research and Department of Geological Sciences, UTSA, helped develop sessions on cave and karst research in China for this workshop. These proceedings could not have been accomplished without the assistance of Lawrence E. Spangler as co-editor who not only has subject matter expertise, but also serves as an editor with the USGS Science Publishing Network. We sincerely hope that this workshop continues to promote future collaboration among scientists of varied and diverse backgrounds, and improves our understanding of karst aquifer systems in the United States and its territories.The extended abstracts of USGS authors were peer reviewed and approved for publication by the USGS. Articles submitted by university researchers and other federal and state agencies did not go through the formal USGS peer review and approval process, and therefore may not adhere to USGS editorial standards or stratigraphic nomenclature. However, all articles had a minimum of two peer reviews and were edited for consistency of appearance in the proceedings. The use of trade, firm or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government. The USGS Water Availability and Use Science Program funded the publication costs of the proceedings.

Introduction to workshop on iron screening and supplementation in iron-replete pregnant women and young children.

PubMed

Taylor, Christine L; Brannon, Patsy M

2017-12-01

The NIH Office of Dietary Supplements convened a public workshop on iron screening and supplementation in iron-replete pregnant women and young children in 2016 in Bethesda, Maryland. The starting point for the workshop was the recent reports from the US Preventive Services Task Force concluding that there was insufficient evidence to evaluate the benefits and harms associated with iron screening and routine supplementation among asymptomatic pregnant women and young children (6-24 mo old) in the United States. The goal of the workshop was to explore and refine understanding about the existing knowledge gaps and research needs associated with these preventive services for these groups. Given the focus on the United States, planning for the workshop took into account the higher iron status in the United States compared with developing countries and, in turn, included a focus on iron-replete individuals consistent with the U-shaped risk curve for nutrient-health relations. Topic areas included adaptations in iron homeostasis associated with pregnancy and young childhood, the impact of inflammation, measurement of iron status, current estimates of iron status for pregnant women and young children in the United States and in Europe, and emerging evidence suggesting adverse effects associated with iron supplementation of iron-replete individuals. A crosscutting dialogue conducted at the close of the workshop formed the basis for a workshop summary that specified evidence gaps and research needs in a range of areas centered on the relation of these adaptations of iron homeostasis with the response to and risk from iron supplementation as well as the need for indicators informative of the full continuum of iron status and based on health outcomes, not just erythropoiesis. © 2017 American Society for Nutrition.

PREFACE: Special section on Computational Fluid Dynamics—in memory of Professor Kunio Kuwahara Special section on Computational Fluid Dynamics—in memory of Professor Kunio Kuwahara

NASA Astrophysics Data System (ADS)

Ishii, Katsuya

2011-08-01

This issue includes a special section on computational fluid dynamics (CFD) in memory of the late Professor Kunio Kuwahara, who passed away on 15 September 2008, at the age of 66. In this special section, five articles are included that are based on the lectures and discussions at `The 7th International Nobeyama Workshop on CFD: To the Memory of Professor Kuwahara' held in Tokyo on 23 and 24 September 2009. Professor Kuwahara started his research in fluid dynamics under Professor Imai at the University of Tokyo. His first paper was published in 1969 with the title 'Steady Viscous Flow within Circular Boundary', with Professor Imai. In this paper, he combined theoretical and numerical methods in fluid dynamics. Since that time, he made significant and seminal contributions to computational fluid dynamics. He undertook pioneering numerical studies on the vortex method in 1970s. From then to the early nineties, he developed numerical analyses on a variety of three-dimensional unsteady phenomena of incompressible and compressible fluid flows and/or complex fluid flows using his own supercomputers with academic and industrial co-workers and members of his private research institute, ICFD in Tokyo. In addition, a number of senior and young researchers of fluid mechanics around the world were invited to ICFD and the Nobeyama workshops, which were held near his villa, and they intensively discussed new frontier problems of fluid physics and fluid engineering at Professor Kuwahara's kind hospitality. At the memorial Nobeyama workshop held in 2009, 24 overseas speakers presented their papers, including the talks of Dr J P Boris (Naval Research Laboratory), Dr E S Oran (Naval Research Laboratory), Professor Z J Wang (Iowa State University), Dr M Meinke (RWTH Aachen), Professor K Ghia (University of Cincinnati), Professor U Ghia (University of Cincinnati), Professor F Hussain (University of Houston), Professor M Farge (École Normale Superieure), Professor J Y Yong (National Taiwan University), and Professor H S Kwak (Kumoh National Institute of Technology). For his contributions to CFD, Professor Kuwahara received Awards from the Japan Society of Automobile Engineers and the Japan Society of Mechanical Engineers in 1992, the Computational Mechanics Achievement Award from the Japan Society of Mechanical Engineers in 1993, and the Max Planck Research Award in 1993. He received the Computational Mechanics Award from the Japan Society of Mechanical Engineers again in 2008. Professor Kuwahara also supported the development of the Japan Society of Fluid Mechanics, whose office is located in the same building as ICFD. In the proceedings of the 6th International Nobeyama Workshop on CFD to commemorate the 60th birthday of Professor Kuwahara, Professor Jae Min Hyun of KAIST wrote 'The major professional achievement of Professor Kuwahara may be compressed into two main categories. First and foremost, Professor Kuwahara will long be recorded as the front-line pioneer in using numerical computations to tackle complex problems in fluid mechanics. ...Another important contribution of Professor Kuwahara was in the training and fostering of talented manpower of computational mechanics research.'[1] Among the various topics of the five papers in this special section are examples of Professor Kuwahara's works mentioned by Professor Hyun. The main authors of all papers have grown up in the research circle of Professor Kuwahara. All the papers demostrate the challenge of new aspects of computational fluid dynamics; a new numerical method for compressible flows, thermo-acoustic flows of helium gas in a small tube, electro-osmic flows in a micro/nano channel, MHD flows over a wavy disk, and a new extraction method of multi-object aircraft design rules. Last but not least, this special section is cordially dedicated to the late Professor Kuwahara and his family. Reference [1] Hyun J M 2005 Preface of New Developments in Computational Fluid Dynamics vol 90 Notes on Numerical Fluid Mechanics and Multidisciplinary Design ed K Fujii et al (Berlin: Springer)

Training meals on wheels volunteers as health literacy coaches for older adults.

PubMed

Rubin, Donald L; Freimuth, Vicki S; Johnson, Sharon D; Kaley, Terry; Parmer, John

2014-05-01

Homebound older adults constitute a "hardly reached" population with respect to health communication. Older adults also typically suffer from health literacy challenges, which put them at increased risk of adverse health outcomes. Suboptimal interactions with providers are one such challenge. Interventions to improve interactive health literacy focus on training consumers/patients in question preparation and asking. Meals on Wheels volunteers are uniquely suited to coach their clients in such interaction strategies. Seventy-three Meals on Wheels volunteers participated in workshops to train as health literacy coaches. The 3- to 4-hour workshops included units on communicating with older adults, on the nature of health literacy, and on the process of interactive health literacy coaching. Participants viewed and discussed videos that modeled the targeted communication behaviors for older adult patients interacting with physicians. They role-played the coaching process. After 9 months, coaches participated in a "booster" session that included videos of ideal coaching practices. Evaluation questionnaires revealed that participants had favorable reactions to the workshops with respect to utility and interest. They especially appreciated learning communication skills and seeing realistic videos. A measure of knowledge about the workshop material revealed a significant increment at posttest. Fidelity of coaching practices with respect to workshop curriculum was confirmed. This training in interactive health literacy for community-based lay volunteers constitutes one way to implement the National Action Plan to Improve Health Literacy for one "hardly reached" population. An online tool kit containing all workshop materials is available.

Proceedings of the XIIIth IAGA Workshop on Geomagnetic Observatory Instruments, Data Acquisition, and Processing

USGS Publications Warehouse

Love, Jeffrey J.

2009-01-01

The thirteenth biennial International Association of Geomagnetism and Aeronomy (IAGA) Workshop on Geomagnetic Observatory Instruments, Data Acquisition and Processing was held in the United States for the first time on June 9-18, 2008. Hosted by the U.S. Geological Survey's (USGS) Geomagnetism Program, the workshop's measurement session was held at the Boulder Observatory and the scientific session was held on the campus of the Colorado School of Mines in Golden, Colorado. More than 100 participants came from 36 countries and 6 continents. Preparation for the workshop began when the USGS Geomagnetism Program agreed, at the close of the twelfth workshop in Belsk Poland in 2006, to host the next workshop. Working under the leadership of Alan Berarducci, who served as the chairman of the local organizing committee, and Tim White, who served as co-chairman, preparations began in 2007. The Boulder Observatory was extensively renovated and additional observation piers were installed. Meeting space on the Colorado School of Mines campus was arranged, and considerable planning was devoted to managing the many large and small issues that accompany an international meeting. Without the devoted efforts of both Alan and Tim, other Geomagnetism Program staff, and our partners at the Colorado School of Mines, the workshop simply would not have occurred. We express our thanks to Jill McCarthy, the USGS Central Region Geologic Hazards Team Chief Scientist; Carol A. Finn, the Group Leader of the USGS Geomagnetism Program; the USGS International Office; and Melody Francisco of the Office of Special Programs and Continuing Education of the Colorado School of Mines. We also thank the student employees that the Geomagnetism Program has had over the years and leading up to the time of the workshop. For preparation of the proceedings, thanks go to Eddie and Tim. And, finally, we thank our sponsors, the USGS, IAGA, and the Colorado School of Mines.

Exposure assessment of workplace manufacturing titanium dioxide particles

NASA Astrophysics Data System (ADS)

Xu, Huadong; Zhao, Lin; Chen, Zhangjian; Zhou, Jingwen; Tang, Shichuan; Kong, Fanling; Li, Xinwei; Yan, Ling; Zhang, Ji; Jia, Guang

2016-10-01

With the widespread use of titanium dioxide (TiO2) human exposure is inevitable, but the exposure data on TiO2 are still limited. This study adopted off-line filter-based sampling combined with real-time activity-based monitoring to measure the concentrations in a workplace manufacturing TiO2 (primary diameter: 194 ± 108 nm). Mass concentrations (MCs) of aerosol particles in the packaging workshop (total dust: 3.17 mg/m3, nano dust: 1.22 mg/m3) were much higher than those in the milling workshop (total dust: 0.79 mg/m3, nano dust: 0.31 mg/m3) and executive office (total dust: 0.44 mg/m3, nano dust: 0.19 mg/m3). However, the MCs of TiO2 were at a relatively low level in the packaging workshop (total TiO2: 46.4 μg/m3, nano TiO2: 16.7 μg/m3) and milling workshop (total TiO2: 39.4 μg/m3, nano TiO2: 19.4 μg/m3) by ICP-MS. The number concentration (NC), surface area concentration (SAC) of aerosol particles potentially deposited in alveolar (SACA), and tracheobronchial (SACTB) regions of lungs in the packaging workshop were (1.04 ± 0.89) × 105 particles/cm3, 414.49 ± 395.07, and 86.01 ± 83.18 μm2/cm3, respectively, which were all significantly higher than those of the milling workshop [(0.12 ± 0.40) × 105 particles/cm3, 75.38 ± 45.23, and 17.60 ± 9.22 μm2/cm3, respectively] as well as executive office and outdoor background ( p < 0.05). Activity-related characteristics were found in both workshops, and the time-variant characteristics showed very similar trends for 3 days in the packaging workshop. Our study provides important data of TiO2 particles exposure in the workplace.

Precipitation Measurements From Space: Workshop report. An element of the climate observing system study

NASA Technical Reports Server (NTRS)

Atlas, D. (Editor); Thiele, O. W. (Editor)

1981-01-01

Global climate, agricultural uses for precipitation information, hydrological uses for precipitation, severe thunderstorms and local weather, global weather are addressed. Ground truth measurement, visible and infrared techniques, microwave radiometry and hybrid precipitation measurements, and spaceborne radar are discussed.

Creating More Effective Mentors: Mentoring the Mentor.

PubMed

Gandhi, Monica; Johnson, Mallory

2016-09-01

Given the diversity of those affected by HIV, increasing diversity in the HIV biomedical research workforce is imperative. A growing body of empirical and experimental evidence supports the importance of strong mentorship in the development and success of trainees and early career investigators in academic research settings, especially for mentees of diversity. Often missing from this discussion is the need for robust mentoring training programs to ensure that mentors are trained in best practices on the tools and techniques of mentoring. Recent experimental evidence shows improvement in mentor and mentee perceptions of mentor competency after structured and formalized training on best practices in mentoring. We developed a 2-day "Mentoring the Mentors" workshop at UCSF to train mid-level and senior HIV researchers from around the country [recruited mainly from Centers for AIDS Research (CFARs)] on best practices, tools and techniques of effective mentoring. The workshop content was designed using principles of Social Cognitive Career Theory (SCCT) and included training specifically geared towards working with early career investigators from underrepresented groups, including sessions on unconscious bias, microaggressions, and diversity supplements. The workshop has been held three times (September 2012, October 2013 and May 2015) with plans for annual training. Mentoring competency was measured using a validated tool before and after each workshop. Mentoring competency skills in six domains of mentoring-specifically effective communication, aligning expectations, assessing understanding, fostering independence, addressing diversity and promoting development-all improved as assessed by a validated measurement tool for participants pre- and -post the "Mentoring the Mentors" training workshops. Qualitative assessments indicated a greater awareness of the micro-insults and unconscious bias experienced by mentees of diversity and a commitment to improve awareness and mitigate these effects via the mentor-mentee relationship. Our "Mentoring the Mentors" workshop for HIV researchers/mentors offers a formal and structured curriculum on best practices, tools and techniques of effective mentoring, and methods to mitigate unconscious bias in the mentoring relationship. We found quantitative and qualitative improvements in mentoring skills as assessed by self-report by participants after each workshop and plan additional programs with longitudinal longer-term assessments focused on objective mentee outcomes (grants, papers, academic retention). Mentoring training can improve mentoring skills and is likely to improve outcomes for optimally-mentored mentees.

Creating more effective mentors: Mentoring the mentor

PubMed Central

Gandhi, Monica; Johnson, Mallory

2016-01-01

Introduction Given the diversity of those affected by HIV, increasing diversity in the HIV biomedical research workforce is imperative. A growing body of empirical and experimental evidence supports the importance of strong mentorship in the development and success of trainees and early career investigators in academic research settings, especially for mentees of diversity. Often missing from this discussion is the need for robust mentoring training programs to ensure that mentors are trained in best practices on the tools and techniques of mentoring. Recent experimental evidence shows improvement in mentor and mentee perceptions of mentor’s competency after structured and formalized training on best practices in mentoring. Methods We developed a 2-day “Mentoring the Mentors” workshop at UCSF to train mid-level and senior HIV researchers from around the country (recruited mainly from Centers for AIDS Research (CFARs)) on best practices, tools and techniques of effective mentoring. The workshop content was designed using principles of Social Cognitive Career Theory (SCCT) and included training specific to working with early career investigators from underrepresented groups, including training on unconscious bias, microaggressions, and diversity supplements. The workshop has been held 3 times (September 2012, October 2013 and May 2015) with plans for annual training. Mentoring competency was measured using a validated tool before and after each workshop. Results Mentoring competency skills in six domains of mentoring -specifically effective communication, aligning expectations, assessing understanding, fostering independence, addressing diversity and promoting development - all improved as assessed by a validated measurement tool for participants pre- and-post the “Mentoring the Mentors” training workshops. Qualitative assessments indicated a greater awareness of the micro-insults and unconscious bias experienced by mentees of diversity and a commitment to improve awareness and mitigate these effects via the mentor-mentee relationship. Discussion Our “Mentoring the Mentors” workshop for HIV researchers/mentors offers a formal and structured curriculum on best practices, tools and techniques of effective mentoring, and methods to mitigate unconscious bias in the mentoring relationship and at the institutional level with mentees of diversity. We found quantitative and qualitative improvements in mentoring skills as assessed by self-report by participants after each workshop and plan additional programs with longitudinal longer-term assessments focused on objective mentee outcomes (grants, papers, academic retention). Mentoring training can improve mentoring skills and are likely to improve outcomes for optimally-mentored mentees. PMID:27039092

Atmospheric Chemistry Over Southern Africa

NASA Technical Reports Server (NTRS)

Gatebe, Charles K.; Levy, Robert C.; Thompson, Anne M.

2011-01-01

During the southern African dry season, regional haze from mixed industrial pollution, biomass burning aerosol and gases from domestic and grassland fires, and biogenic sources from plants and soils is worsened by a semi-permanent atmosphere gyre over the subcontinent. These factors were a driver of several major international field campaigns in the 1990s and early 2000s, and attracted many scientists to the region. Some researchers were interested in understanding fundamental processes governing chemistry of the atmosphere and interaction with climate change. Others found favorable conditions for evaluating satellite-derived measurements of atmospheric properties and a changing land surface. With that background in mind a workshop on atmospheric chemistry was held in South Africa. Sponsored by the International Commission for Atmospheric Chemistry and Global Pollution (ICACGP; http://www.icacgp.org/), the workshop received generous support from the South African power utility, Eskom, and the Climatology Research Group of the University of the Witwatersrand, Johannesburg, South Africa. The purpose of the workshop was to review some earlier findings as well as more recent findings on southern African climate vulnerability, chemical changes due to urbanization, land-use modification, and how these factors interact. Originally proposed by John Burrows, president of ICACGP, the workshop was the first ICACGP regional workshop to study the interaction of air pollution with global chemical and climate change. Organized locally by the University of the Witwatersrand, the workshop attracted more than 60 delegates from South Africa, Mozambique, Botswana, Zimbabwe, France, Germany, Canada, and the United States. More than 30 presentations were given, exploring both retrospective and prospective aspects of the science. In several talks, attention was focused on southern African chemistry, atmospheric pollution monitoring, and climate processes as they were studied in the field campaigns such as Transport and Atmospheric Chemistry Near the Equator-Atlantic (TRACE-A), Southern African Fire-Atmosphere Research Initiative (SAFARI-92), and Southern African Regional Science Initiative (SAFARI 2000). Since those large international efforts, satellites have matured enough to enable quantifiable measurements of regional land surface, atmosphere, and ocean. In addition, global and chemical transport models have also been advanced to incorporate various data. Thus, the timing of the workshop was right for a full-fledged re-assessment of the chemistry, physics, and socio-economical impacts caused by pollution in the region, including a characterization of sources, deposition, and feedbacks with climate change.

Traffic Data Quality Measurement : Final Report

DOT National Transportation Integrated Search

2004-09-15

One of the foremost recommendations from the FHWA sponsored workshops on Traffic Data Quality (TDQ) in 2003 was a call for "guidelines and standards for calculating data quality measures." These guidelines and standards are expected to contain method...

MECA Workshop on Atmospheric H2O Observations of Earth and Mars. Physical Processes, Measurements and Interpretations

NASA Technical Reports Server (NTRS)

Clifford, Stephen M. (Editor); Haberle, Robert M. (Editor)

1988-01-01

The workshop was held to discuss a variety of questions related to the detection and cycling of atmospheric water. Among the questions addressed were: what factors govern the storage and exchange of water between planetary surfaces and atmospheres; what instruments are best suited for the measurement and mapping of atmospheric water; do regolith sources and sinks of water have uniquely identifiable column abundance signatures; what degree of time and spatial resolution in column abundance data is necessary to determine dynamic behavior. Of special importance is the question, does the understanding of how atmospheric water is cycled on Earth provide any insights for the interpretation of Mars atmospheric data.

Remote Measurement of Pollution-A 40-Year Langley Retrospective. Part 2; Aerosols and Clouds

NASA Technical Reports Server (NTRS)

Remsberg, Ellis E.

2012-01-01

A workshop was convened in 1971 by the National Aeronautics and Space Administration (NASA) on the Remote Measurement of Pollution (RMOP), and the findings and recommendations of its participants are in a NASA Special Publication (NASA SP-285). The three primary workshop panels and their chairmen were focused on trace gas species (Will Kellogg), atmospheric particulates or aerosols (Verner Suomi), and water pollution (Gifford Ewing). Many of the workshop participants were specialists in the techniques that might be employed for regional to global-scale, remote measurements of the atmospheric parameters from Earth-orbiting satellites. In 2011 the author published a 40-year retrospective (or Part I) of the instrumental developments that were an outgrowth of the RMOP panel headed by Will Kellogg, i.e., on atmospheric temperature and gaseous species. The current report (or Part II) is an analogous retrospective of the vision of the panel led by Verner Suomi for the measurement of particulates (or aerosols) and clouds and for their effects on Earth s radiation budget. The class of measurement techniques includes laser radar or lidar, solar occultation, limb emission and scattering, nadir-viewing photometry or radiometry, and aerosol polarimetry. In addition, the retrospective refers to the scientific imperatives that led to those instrument developments of 1971-2010. Contributions of the atmospheric technologists at the Langley Research Center are emphasized, and their progress is placed in the context of the parallel and complementary work from within the larger atmospheric science community.

Consensus for EGFR mutation testing in non-small cell lung cancer: results from a European workshop.

PubMed

Pirker, Robert; Herth, Felix J F; Kerr, Keith M; Filipits, Martin; Taron, Miquel; Gandara, David; Hirsch, Fred R; Grunenwald, Dominique; Popper, Helmut; Smit, Egbert; Dietel, Manfred; Marchetti, Antonio; Manegold, Christian; Schirmacher, Peter; Thomas, Michael; Rosell, Rafael; Cappuzzo, Federico; Stahel, Rolf

2010-10-01

Activating somatic mutations of the tyrosine kinase domain of epidermal growth factor receptor (EGFR) have recently been characterized in a subset of patients with advanced non-small cell lung cancer (NSCLC). Patients harboring these mutations in their tumors show excellent response to EGFR tyrosine kinase inhibitors (EGFR-TKIs). The EGFR-TKI gefitinib has been approved in Europe for the treatment of adult patients with locally advanced or metastatic NSCLC with activating mutations of the EGFR TK. Because EGFR mutation testing is not yet well established across Europe, biomarker-directed therapy only slowly emerges for the subset of NSCLC patients most likely to benefit: those with EGFR mutations. The "EGFR testing in NSCLC: from biology to clinical practice" International Association for the Study of Lung Cancer-European Thoracic Oncology Platform multidisciplinary workshop aimed at facilitating the implementation of EGFR mutation testing. Recommendations for high-quality EGFR mutation testing were formulated based on the opinion of the workshop expert group. Co-operation and communication flow between the various disciplines was considered to be of most importance. Participants agreed that the decision to request EGFR mutation testing should be made by the treating physician, and results should be available within 7 working days. There was agreement on the importance of appropriate sampling techniques and the necessity for the standardization of tumor specimen handling including fixation. Although there was no consensus on which laboratory test should be preferred for clinical decision making, all stressed the importance of standardization and validation of these tests. The recommendations of the workshop will help implement EGFR mutation testing in Europe and, thereby, optimize the use of EGFR-TKIs in clinical practice.

Algorithmic trends in computational fluid dynamics; The Institute for Computer Applications in Science and Engineering (ICASE)/LaRC Workshop, NASA Langley Research Center, Hampton, VA, US, Sep. 15-17, 1991

NASA Technical Reports Server (NTRS)

Hussaini, M. Y. (Editor); Kumar, A. (Editor); Salas, M. D. (Editor)

1993-01-01

The purpose here is to assess the state of the art in the areas of numerical analysis that are particularly relevant to computational fluid dynamics (CFD), to identify promising new developments in various areas of numerical analysis that will impact CFD, and to establish a long-term perspective focusing on opportunities and needs. Overviews are given of discretization schemes, computational fluid dynamics, algorithmic trends in CFD for aerospace flow field calculations, simulation of compressible viscous flow, and massively parallel computation. Also discussed are accerelation methods, spectral and high-order methods, multi-resolution and subcell resolution schemes, and inherently multidimensional schemes.

Foreword

NASA Astrophysics Data System (ADS)

Bodzenta, Jerzy

2003-06-01

The 8t International Workshop on Photoacoustics and Photothermics took place at Tourist-Sport Center “Zagro” in Szczyrk as a part of 32nd Winter School on Molecular and Quantum Acoustics. These Workshops have been organized every year since 1996, by the Upper-Silesian Division of Polish Acoustical Society in co-operation with Institute of Physics, Silesian Technical University of Gliwice. Traditionally, the workshops take place in small towns in Beskidy Mountains in the last week of February. They always start on Thursday afternoon and end on Friday evening.The workshop is a place where scientists and students working either in the field of photoacoustics and photothermics or simply applying photoacoustic and photothermal effects in another investigations may present their own, original results, discuss problems and ideas, listen to review lectures presented by representatives of research group and laboratories from different countries. In addition, what is also very important, participants may establish new acquaintances essential for future cooperation.The meeting brings together members of all Polish research groups working in photoacoustics and photothermics and invited guests from abroad. Scientists who join the meeting for the first time present review lectures, characterizing activity of their research groups. Contributed papers are devoted to the newest results. It is also possible to show results of ongoing projects in the form of posters.The Proceedings contain full texts of 15 papers presented during the 8th Workshop on Photoacoustics and Photothermics. Physical and technical topics concerning use of thermal waves in measurements were the main subject of interest. Papers comprise problems of theoretical description of photothermal phenomenon, models of different detection schemes, proposals of new measuring methods. A few papers present results of material studies. There are also very interesting contributions showing potential applications of photoacoustic measurements in medicine and biology. Two papers concem advantages and disadvantages of photoacoustic spectroscopy in chemistry, surface sciences and catalytical research.The Organizers gratefully acknowledge the financial support of the Polish State Committee of Scientific Research received via the Polish Acoustical Society.I would also like to thank the authors, chairmen of the sessions, and debaters for their contributions, the whole group of colleagues and co-workers for their assistance in organizing the meeting and helping to provide a good scientific and social atmosphere during the Workshop.I would dedicate this Proceedings to the Memory of Prof. Zygmunt Kleszczewski, Director of the Institute of Physics, Silesian University of Technology, who died suddenly in May 2003. Since the idea of these Workshops arose in 1995, he has always supported it and helped me in this undertaking. He will be greatly missed for his friendly personality.(Silesian University of Technology,Gliwice, 12th May 2003)

Measuring the learning effectiveness of Web-based teacher professional development in the hypothesis based learning method of teaching science

NASA Astrophysics Data System (ADS)

Wilson, Penne L.

2007-12-01

This study was conducted as part of the five year evaluation of the Star Schools grant awarded to Oklahoma State University for the development on online teacher professional development in the Hypothesis Based Learning (HbL) method of science instruction. Participants in this research were five teachers who had completed the online workshop, submitted a lesson plan, and who allowed this researcher and other members of the University of New Mexico Evaluation Team into their classrooms to observe and to determine if the learning of the method from the online HbL workshop had translated into practice. These teachers worked in inner city, suburban, metropolitan, and rural communities in the U.S. Southwest. This study was conducted to determine if teachers learned the HbL method from the online HbL workshop, to examine the relationship of satisfaction to learning, and to determine the elements of the online workshop that led to teacher learning. To measure learning of HbL, three different assessment instruments were used: embedded assessments within the online HbL workshop that gave teachers a scenario and asked them to generate questions to facilitate the HbL process; the analysis of a lesson plan provided by teachers using a science concept that they wished to incorporate in their curriculum using an HbL lesson template provided at the HbL website; and, observations of teachers facilitating the HbL process conducted at three different times during the year that they began the HbL online workshop. To determine if teachers were satisfied with the learning environment, the online HbL workshop, and the product, HbL Method for Teaching Science, and to determine if teachers could identify the elements of the online workshop that led to learning, interviews with the participants were conducted. The research findings were presented in two parts: Part I is an analysis of data provided by the assessment instruments and a content analysis of the transcripts of the teacher interviews; Part II is a series of embedded, explanatory case studies which present an in-depth examination of three of the participants of this study to better understand the factors that influenced their learning of the HbL method of teaching science. Findings of this study indicate that teachers did learn the HbL method of teaching science through the online HbL workshop, the only place instruction in the HbL method was available. The structure of the online workshop which first introduced an element of the HbL process to teachers, next asked them to conduct a personal activity, and then to use a similar activity in their classrooms with students, and to reflect on the outcome of the activity, was successful in teaching the HbL method. Teachers expressed satisfaction with the structure of the online workshop and with the HbL method which they believed made learning science fun and which encouraged students to become more creative and critical thinkers, and also increased their knowledge of science concepts. The main motivation for learning HbL and the primary factor that led to teachers' satisfaction was the students' positive reaction to the HbL method. The teachers were encouraged because the students loved to do science after being introduced to HbL. Also identified in this study was the need by a participant for the inclusion of video models of teachers using the HbL method within the HbL online workshop. This suggestion demonstrated the need to incorporate more learning styles in the activities included in the HbL workshop in order to appeal to a wider audience of online learners.

[Health education at the health workshops of Cahors: challenges].

PubMed

Théry, Céline

2013-01-01

There have been significant developments in health education over recent years. Focusing on France, the purpose of this paper is to examine the role of health education in reducing social inequalities based on the example of the Atelier santé ville de Cahors (Cahors Health Workshop). The paper addresses the following questions: What are the results and outcomes of the workshop? What kind of health education issues are at stake in the territorial approach to policy-making in an urban context? We examined the methods underlying the health education measures taken in the Cahors Health Workshop, which involve project-based approaches and the promotion of community health. Health education aimed at improving health is central to issues such as listening and speaking, the development of autonomy and the responsibilization of urban actors. Based on a rigorous methodology and the underlying values, health education in the Cahors Health Workshop places local residents, elected representatives and health professionals at the heart of the health care process (from the diagnostic process to the assessment process) and contributes to the reduction of social inequalities in health while facilitating access to information and health care. The goal of health education is to encourage individuals to be responsible for their own health in order to empower them to make informed choices adapted to the demands of their environment.

Report of Workshop on Traffic, Health, and Infrastructure Planning

PubMed Central

White, Ronald H.; Spengler, John D.; Dilwali, Kumkum M.; Barry, Brenda E.; Samet, Jonathan M.

2009-01-01

Recent air pollutant measurement data document unique aspects of the air pollution mixture near roadways, and an expanding body of epidemiological data suggests increased risks for exacerbation of asthma and other respiratory diseases, premature mortality, and certain cancers and birth outcomes from air pollution exposures in populations residing in relatively close proximity to roadways. The Workshop on Traffic, Health, and Infrastructure Planning, held in February 2004, was convened to provide a forum for interdisciplinary discussion of motor vehicle emissions, exposures and potential health effects related to proximity to motor vehicle traffic. This report summarizes the workshop discussions and findings regarding the current science on this issue, identifies planning and policy issues related to localized motor vehicle emissions and health concerns, and provides recommendations for future research and policy directions. PMID:16983859

Evapotranspiration as a Regional Climate Priority: Results from a NASA/USDA Workshop

NASA Technical Reports Server (NTRS)

Lawford, Richard; Kustas, Bill; Toll, David; Anderson, Martha; Doorn, Bradley; Allen, Richard; Engman, Ted; Morse, Tony

2011-01-01

On April 5 to 7, 2011, the National Aeronautics and Space Administration (NASA) and the United States Department of Agriculture-Agricultural Research Service (USDA-ARS) sponsored a Workshop on Evapotranspiration (ET) in Silver Spring Maryland. The workshop was a response to a recommendation in the 2009-2011 GEO (Group on Earth Observations) Work Plan that a workshop on ET should be held to discuss issues related to ET products and services and the potential for incorporating ET activities into the 2012-2015 GEO Work Plan. The workshop had a regional emphasis, although there were several excellent international and global presentations including one on the GEWEX LANDFLUX project. The different scales of these activities suggests that a framework is needed that can accommodate both regional and global ET activities. Despite limitations with the workshop's scheduling, it attracted 76 experts who contributed informative presentations and insightful discussions. The goals of the workshop involved the exchange of information and ideas and the development of plans for providing more visibility for ET issues. Specific objectives included 1) defining the needs and requirements for evapotranspiration data in weather and climate studies, in natural and agro-ecoystem monitoring, and in water resource management; 2) reviewing the methods used to measure and model evapotranspiration; 3) assessing surface and satellite observation systems required to support ET measurement, modeling and evaluation; 4) assessing the feasibility of developing a proposal for a task on evapotranspiration for the 2012-2015 GEO Work Plan, and 5) exploring the level of support and consensus for developing a strategy for establishing evapotranspiration as an Essential Climate Variable (ECV) within the Global Climate Observing System (GCOS) framework The workshop featured a combination of oral presentations and breakout group sessions focused on the above objectives. There were also poster presentations providing opportunities for one-on-one discussions of ET modeling and measurement techniques. Presentations by users of ET data set the tone for the workshop. In the USA at the national and regional levels water rights issues represent a major opportunity for ET applications. ET data play a major role in estimating water loss due to irrigation, the largest cause of consumptive water loss in the USA, particularly in the West. Irrigation requirements are relatively specific since the needs are clearly defined by the geometry and number of the irrigation systems and can be monitored with high resolution satellite data. There was a strong consensus that land surface temperature (LST) at high resolution is critical for monitoring irrigation. State governments have made commitments to more efficient water management in the western US, but they need full access to improved and more timely ET data and applications to implement this plan. Water managers also reported that in spite of the recent development of. new techniques, the procedures used in some of the water balance calculations in some states are out of date and do not take advantage of new observational and data assimilation systems. The development of ET forecasts for water management is also seen as a priority. Although ET forecasts are currently being produced on an experimental basis these predictions could be improved by considering ET as a dynamic prediction variable in models and by increasing the time resolution of these ET predictions.

Insights Regarding Ice Nucleating Particle Measurement Capabilities from Laboratory and Field Measurements During the Fifth International Ice Nucleation Workshop

NASA Astrophysics Data System (ADS)

DeMott, P. J.; Mohler, O.; Cziczo, D. J.; Hiranuma, N.; Brooks, S. D.; Petters, M.

2017-12-01

Improvement in the ability to quantify the role of aerosols in primary ice formation in clouds is vital to improving prediction of natural and anthropogenic impacts on cold cloud properties and reducing uncertainties in climate predictions. A host of common and new methods for quantifying the atmospheric abundance of ice nucleating particles (INPs) have recently been developed. To realize the utility of such data for numerical model parameterization development and validation, it is important to understand similarities, differences, and biases in different methods. To achieve this goal, it is common to challenge instruments with a range of aerosol types in laboratory studies. Only a few comparisons have occurred in atmospheric situations. This presentation highlights comparisons made in laboratory and field phases of the Fifth International Ice Nucleation workshop (FIN) during 2015. The FIN-2 laboratory workshop was conducted at the AIDA facility of the Karlsruhe Institute of Technology, involving nine real-time INP instruments and several sampling methods for wet suspensions and filter collection and resuspension for INP measurements. The FIN-3 atmospheric activity was conducted at the Desert Research Institute's Storm Peak Laboratory (SPL), with a reduced set of participants. Lessons and insights were gained during analyses of data from both workshops regarding the capabilities and comparability of present ice nucleation measurement systems. The FIN-2 and FIN-3 results show typical one order of magnitude agreement within basic measurement types and overall for characterizing the concentrations (over several orders of magnitude dynamic range from -5 to -35 C) of a variety of INP types and ambient INPs active in the immersion-freezing mode. Discrepancies are least for lab sampling of natural soil particle INPs and greatest for materials with steep d[INP]/dT functions, such as K-feldspar or bacterial INPs processed warmer than -8 C. Varied reasons and implications for atmospheric measurements will be discussed. FIN-3 ambient studies also showed correspondence for the first time between online and offline assessment of the contrasting INP concentrations active in deposition and immersion freezing (much higher numbers) regimes. Major contributions from the FIN participant teams are acknowledged.

Novel strategies for sedentary behavior research.

PubMed

Rosenberg, Dori E; Lee, I-Min; Young, Deborah Rohm; Prohaska, Thomas R; Owen, Neville; Buchner, David M

2015-06-01

This article reports on the "Novel Strategies for Sedentary Behavior Research" session of the Sedentary Behavior: Identifying Research Priorities workshop. The purpose of this session of the workshop were to propose strategies for accomplishing a research agenda in dealing with sedentary behavior and to consider research priorities for people at high risk for excess sedentary behavior. The four major recommendations from this workshop were as follows: 1) To add repeated objective measures of physical activity and sedentary behavior to existing cohort studies and standardize approaches to measurement and analysis. Epidemiologic studies will be the most efficient design for addressing some research questions. 2) To increase research efficiency, consider the advantages of a network of connected research studies and health systems. Advantages include access to existing data in electronic health records. 3) To carefully select a variety of high-risk study populations and preplan collaboration among studies in intervention research. This strategy can efficiently address the breadth of issues in sedentary behavior research. 4) To include comparative effectiveness designs and pure environmental interventions in intervention research. This strategy facilitates and enhances translation of interventions into practice.

COMIS -- an international multizone air-flow and contaminant transport model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feustel, H.E.

1998-08-01

A number of interzonal models have been developed to calculate air flows and pollutant transport mechanisms in both single and multizone buildings. A recent development in multizone air-flow modeling, the COMIS model, has a number of capabilities that go beyond previous models, much as COMIS can be used as either a stand-alone air-flow model with input and output features or as an infiltration module for thermal building simulation programs. COMIS was designed during a 12 month workshop at Lawrence Berkeley National Laboratory (LBNL) in 1988-89. In 1990, the Executive Committee of the International Energy Agency`s Energy Conservation in Buildings andmore » Community Systems program created a working group on multizone air-flow modeling, which continued work on COMIS. The group`s objectives were to study physical phenomena causing air flow and pollutant (e.g., moisture) transport in multizone buildings, develop numerical modules to be integrated in the previously designed multizone air flow modeling system, and evaluate the computer code. The working group supported by nine nations, officially finished in late 1997 with the release of IISiBat/COMIS 3.0, which contains the documented simulation program COMIS, the user interface IISiBat, and reports describing the evaluation exercise.« less

CRI Summer Conference (2005) on Inverse Scattering Held in Charlotte. North Carolina on May 30 - June 3, 2005

DTIC Science & Technology

2005-08-30

of the computed Rayleigh coefficients from the measured data, and the third is a regularization term to cope with the ill-posedness of the inverse...objects and properties of non-scattering scatterers. This was a residential workshop organized along the lines of a Gordon Conference, with talks... with all of those inevitable logistical and planning details that go into making a workshop such as this a success. This meeting would not have

Workshop on the evolution of the Martian atmosphere

NASA Technical Reports Server (NTRS)

Luhmann, J. G. (Editor); Jakosky, B. M. (Editor)

1992-01-01

Thirty-three papers based on the state of our knowledge prior to the anticipated new results from Mars Observer were presented at the workshop. Because of the nature of the subject, the scope of the papers covered a broad disciplinary range encompassing astronomy and solar physics, geology and geophysics, climatology, atmospheric science, aeronomy, and space physics. The 42 participants heard about topics from the evolution of solar-type stars to candidate instrumentation for measuring escape to space on yet-unscheduled future missions.

Long-Term Monitoring of Global Climate Forcings and Feedbacks

NASA Technical Reports Server (NTRS)

Hansen, J. (Editor); Rossow, W. (Editor); Fung, I. (Editor)

1993-01-01

A workshop on Long-Term Monitoring of Global Climate Forcings and Feedbacks was held February 3-4, 1992, at NASA's Goddard Institute for Space Studies to discuss the measurements required to interpret long-term global temperature changes, to critique the proposed contributions of a series of small satellites (Climsat), and to identify needed complementary monitoring. The workshop concluded that long-term (several decades) of continuous monitoring of the major climate forcings and feedbacks is essential for understanding long-term climate change.

MORS Workshop on Capabilities-Based Planning II: Identifying, Classifying and Measuring Risk in a Post 9-11 World, held in McLean, Virginia on 4-6 April 2006

DTIC Science & Technology

2007-08-22

change resulting from a QDR is not a prima facie case for or against success. It is understandable that Congress expected major change given the...Allen, FS and Jim Bexfield, FS Corrina Ross -Witkowski, Editor/Publisher 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS...11 World Workshop. 15. SUBJECT TERMS 16. SECURITY CLASSIFCATION: UNCLASSIFIED 19a. NAME OF RESPONSIBLE PERSON Corrina Ross