Career Directions--Electronics Technician

ERIC Educational Resources Information Center

Tech Directions, 2012

2012-01-01

Electronics technicians (ETs) work with electronics engineers to set up and maintain complicated electronics equipment that many of today's businesses rely on. The field is varied. An ET might service the industrial controls on a factory floor. Or repair missile control systems for the government. Or an ET could specialize in cars and trucks,…

Web-enabling technologies for the factory floor: a web-enabling strategy for emanufacturing

NASA Astrophysics Data System (ADS)

Velez, Ricardo; Lastra, Jose L. M.; Tuokko, Reijo O.

2001-10-01

This paper is intended to address the different technologies available for Web-enabling of the factory floor. It will give an overview of the importance of Web-enabling of the factory floor, in the application of the concepts of flexible and intelligent manufacturing, in conjunction with e-commerce. As a last section, it will try to define a Web-enabling strategy for the application in eManufacturing. This is made under the scope of the electronics manufacturing industry, so every application, technology or related matter is presented under such scope.

Hybrid biological, electron beam and zero-valent nano iron treatment of recalcitrant metalworking fluids.

PubMed

Thill, Patrick G; Ager, Duane K; Vojnovic, Borivoj; Tesh, Sarah J; Scott, Thomas B; Thompson, Ian P

2016-04-15

Hybrid approaches for the remediation and detoxification of toxic recalcitrant industrial wastewater were investigated. The focus was waste metalworking fluid, which was selected as a representative model of other waste streams that are toxic, recalcitrant and that require more sustainable routes of safe disposal. The hybrid approaches included biodegradation, electron beam irradiation and zero-valent nano iron advanced oxidation processes that were employed individually and in sequence employing a factorial design. To compare process performance operationally exhausted and pristine metalworking fluid were compared. Sequential hybrid electron beam irradiation, biological, nanoscale zero-valent iron and biological treatment lead to synergistic detoxification and degradation of both recalcitrant streams, as determined by complementary surrogates and lead to overall improved COD removal of 92.8 ± 1.4% up from 85.9 ± 3.4% for the pristine metalworking fluid. Electron beam pre-treatment enabled more effective biotreatment, achieving 69.5 ± 8% (p = 0.005) and 24.6 ± 4.8% (p = 0.044) COD reductions. Copyright © 2016. Published by Elsevier Ltd.

Gearing up to the factory of the future

NASA Astrophysics Data System (ADS)

Godfrey, D. E.

1985-01-01

The features of factories and manufacturing techniques and tools of the near future are discussed. The spur to incorporate new technologies on the factory floor will originate in management, who must guide the interfacing of computer-enhanced equipment with traditional manpower, materials and machines. Electronic control with responsiveness and flexibility will be the key concept in an integrated approach to processing materials. Microprocessor controlled laser and fluid cutters add accuracy to cutting operations. Unattended operation will become feasible when automated inspection is added to a work station through developments in robot vision. Optimum shop management will be achieved through AI programming of parts manufacturing, optimized work flows, and cost accounting. The automation enhancements will allow designers to affect directly parts being produced on the factory floor.

A reference architecture for the component factory

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Caldiera, Gianluigi; Cantone, Giovanni

1992-01-01

Software reuse can be achieved through an organization that focuses on utilization of life cycle products from previous developments. The component factory is both an example of the more general concepts of experience and domain factory and an organizational unit worth being considered independently. The critical features of such an organization are flexibility and continuous improvement. In order to achieve these features we can represent the architecture of the factory at different levels of abstraction and define a reference architecture from which specific architectures can be derived by instantiation. A reference architecture is an implementation and organization independent representation of the component factory and its environment. The paper outlines this reference architecture, discusses the instantiation process, and presents some examples of specific architectures by comparing them in the framework of the reference model.

Factory Production Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on factory production occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include assemblers, blue collar worker…

The 1820 Census of Manufactures. Teaching with Documents.

ERIC Educational Resources Information Center

Potter, Lee Ann; Schamel, Wynell

1999-01-01

Reviews the emergence of employment opportunities for women outside the home. Focuses specifically on the Dover Cotton Factory in Dover, New Hampshire. Provides a reproduction of the page from the 1820 Census of Manufactures that contains information about the Dover Cotton Factory. (Contains document based teaching activities.) (CMK)

The Factorial Structure of Four Temperament Styles and Measurement Invariance across Gender and Age Groups

ERIC Educational Resources Information Center

Rowinski, Tomasz; Cieciuch, Jan; Oakland, Thomas

2014-01-01

The Polish Temperament Styles Questionnaire (PTSQ), derived from Student Style Questionnaire (SSQ) was developed to measure four bipolar temperament styles: extroverted versus introverted, practical versus imaginative, thinking versus feeling, and organized versus flexible. The study focuses on factorial validity and measurement invariance…

Improving Electronic Sensor Reliability by Robust Outlier Screening

PubMed Central

Moreno-Lizaranzu, Manuel J.; Cuesta, Federico

2013-01-01

Electronic sensors are widely used in different application areas, and in some of them, such as automotive or medical equipment, they must perform with an extremely low defect rate. Increasing reliability is paramount. Outlier detection algorithms are a key component in screening latent defects and decreasing the number of customer quality incidents (CQIs). This paper focuses on new spatial algorithms (Good Die in a Bad Cluster with Statistical Bins (GDBC SB) and Bad Bin in a Bad Cluster (BBBC)) and an advanced outlier screening method, called Robust Dynamic Part Averaging Testing (RDPAT), as well as two practical improvements, which significantly enhance existing algorithms. Those methods have been used in production in Freescale® Semiconductor probe factories around the world for several years. Moreover, a study was conducted with production data of 289,080 dice with 26 CQIs to determine and compare the efficiency and effectiveness of all these algorithms in identifying CQIs. PMID:24113682

Improving electronic sensor reliability by robust outlier screening.

PubMed

Moreno-Lizaranzu, Manuel J; Cuesta, Federico

2013-10-09

Electronic sensors are widely used in different application areas, and in some of them, such as automotive or medical equipment, they must perform with an extremely low defect rate. Increasing reliability is paramount. Outlier detection algorithms are a key component in screening latent defects and decreasing the number of customer quality incidents (CQIs). This paper focuses on new spatial algorithms (Good Die in a Bad Cluster with Statistical Bins (GDBC SB) and Bad Bin in a Bad Cluster (BBBC)) and an advanced outlier screening method, called Robust Dynamic Part Averaging Testing (RDPAT), as well as two practical improvements, which significantly enhance existing algorithms. Those methods have been used in production in Freescale® Semiconductor probe factories around the world for several years. Moreover, a study was conducted with production data of 289,080 dice with 26 CQIs to determine and compare the efficiency and effectiveness of all these algorithms in identifying CQIs.

From 'solution shop' model to 'focused factory' in hospital surgery: increasing care value and predictability.

PubMed

Cook, David; Thompson, Jeffrey E; Habermann, Elizabeth B; Visscher, Sue L; Dearani, Joseph A; Roger, Veronique L; Borah, Bijan J

2014-05-01

The full-service US hospital has been described organizationally as a "solution shop," in which medical problems are assumed to be unstructured and to require expert physicians to determine each course of care. If universally applied, this model contributes to unwarranted variation in care, which leads to lower quality and higher costs. We purposely disrupted the adult cardiac surgical practice that we led at Mayo Clinic, in Rochester, Minnesota, by creating a "focused factory" model (characterized by a uniform approach to delivering a limited set of high-quality products) within the practice's solution shop. Key elements of implementing the new model were mapping the care process, segmenting the patient population, using information technology to communicate clearly defined expectations, and empowering nonphysician providers at the bedside. Using a set of criteria, we determined that the focused-factory model was appropriate for 67 percent of cardiac surgical patients. We found that implementation of the model reduced resource use, length-of-stay, and cost. Variation was markedly reduced, and outcomes were improved. Assigning patients to different care models increases care value and the predictability of care process, outcomes, and costs while preserving (in a lesser clinical footprint) the strengths of the solution shop. We conclude that creating a focused-factory model within a solution shop, by applying industrial engineering principles and health information technology tools and changing the model of work, is very effective in both improving quality and reducing costs.

Analysis of replication factories in human cells by super-resolution light microscopy

PubMed Central

2009-01-01

Background DNA replication in human cells is performed in discrete sub-nuclear locations known as replication foci or factories. These factories form in the nucleus during S phase and are sites of DNA synthesis and high local concentrations of enzymes required for chromatin replication. Why these structures are required, and how they are organised internally has yet to be identified. It has been difficult to analyse the structure of these factories as they are small in size and thus below the resolution limit of the standard confocal microscope. We have used stimulated emission depletion (STED) microscopy, which improves on the resolving power of the confocal microscope, to probe the structure of these factories at sub-diffraction limit resolution. Results Using immunofluorescent imaging of PCNA (proliferating cell nuclear antigen) and RPA (replication protein A) we show that factories are smaller in size (approximately 150 nm diameter), and greater in number (up to 1400 in an early S- phase nucleus), than is determined by confocal imaging. The replication inhibitor hydroxyurea caused an approximately 40% reduction in number and a 30% increase in diameter of replication factories, changes that were not clearly identified by standard confocal imaging. Conclusions These measurements for replication factory size now approach the dimensions suggested by electron microscopy. This agreement between these two methods, that use very different sample preparation and imaging conditions, suggests that we have arrived at a true measurement for the size of these structures. The number of individual factories present in a single nucleus that we measure using this system is greater than has been previously reported. This analysis therefore suggests that each replication factory contains fewer active replication forks than previously envisaged. PMID:20015367

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fontana, Juan; Lopez-Iglesias, Carmen; Tzeng, Wen-Ping

Viral factories are complex structures in the infected cell where viruses compartmentalize their life cycle. Rubella virus (RUBV) assembles factories by recruitment of rough endoplasmic reticulum (RER), mitochondria and Golgi around modified lysosomes known as cytopathic vacuoles or CPVs. These organelles contain active replication complexes that transfer replicated RNA to assembly sites in Golgi membranes. We have studied the structure of RUBV factory in three dimensions by electron tomography and freeze-fracture. CPVs contain stacked membranes, rigid sheets, small vesicles and large vacuoles. These membranes are interconnected and in communication with the endocytic pathway since they incorporate endocytosed BSA-gold. RER andmore » CPVs are coupled through protein bridges and closely apposed membranes. Golgi vesicles attach to the CPVs but no tight contacts with mitochondria were detected. Immunogold labelling confirmed that the mitochondrial protein p32 is an abundant component around and inside CPVs where it could play important roles in factory activities.« less

A novel sheet-like virus particle array is a hallmark of Zika virus infection.

PubMed

Liu, Jun; Kline, Brandon A; Kenny, Tara A; Smith, Darci R; Soloveva, Veronica; Beitzel, Brett; Pang, Song; Lockett, Stephen; Hess, Harald F; Palacios, Gustavo; Kuhn, Jens H; Sun, Mei G; Zeng, Xiankun

2018-04-25

Zika virus (ZIKV) is an emerging flavivirus that caused thousands of human infections in recent years. Compared to other human flaviviruses, ZIKV replication is not well understood. Using fluorescent, transmission electron, and focused ion beam-scanning electron microscopy, we examined ZIKV replication dynamics in Vero 76 cells and in the brains of infected laboratory mice. We observed the progressive development of a perinuclear flaviviral replication factory both in vitro and in vivo. In vitro, we illustrated the ZIKV lifecycle from particle cell entry to egress. ZIKV particles assembled and aggregated in an induced convoluted membrane structure and ZIKV strain-specific membranous vesicles. While most mature virus particles egressed via membrane budding, some particles also likely trafficked through late endosomes and egressed through membrane abscission. Interestingly, we consistently observed a novel sheet-like virus particle array consisting of a single layer of ZIKV particles. Our study further defines ZIKV replication and identifies a novel hallmark of ZIKV infection.

Surgical Process Improvement: Impact of a Standardized Care Model With Electronic Decision Support to Improve Compliance With SCIP Inf-9.

PubMed

Cook, David J; Thompson, Jeffrey E; Suri, Rakesh; Prinsen, Sharon K

2014-01-01

The absence of standardization in surgical care process, exemplified in a "solution shop" model, can lead to unwarranted variation, increased cost, and reduced quality. A comprehensive effort was undertaken to improve quality of care around indwelling bladder catheter use following surgery by creating a "focused factory" model within the cardiac surgical practice. Baseline compliance with Surgical Care Improvement Inf-9, removal of urinary catheter by the end of surgical postoperative day 2, was determined. Comparison of baseline data to postintervention results showed clinically important reductions in the duration of indwelling bladder catheters as well as marked reduction in practice variation. Following the intervention, Surgical Care Improvement Inf-9 guidelines were met in 97% of patients. Although clinical quality improvement was notable, the process to accomplish this-identification of patients suitable for standardized pathways, protocol application, and electronic systems to support the standardized practice model-has potentially greater relevance than the specific clinical results. © 2013 by the American College of Medical Quality.

Solenoid Fringe Field Effects for the Neutrino Factory Linac - MAD-X Investigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. Aslaninejad,C. Bontoiu,J. Pasternak,J. Pozimski,Alex Bogacz

2010-05-01

International Design Study for the Neutrino Factory (IDS-NF) assumes the first stage of muon acceleration (up to 900 MeV) to be implemented with a solenoid based Linac. The Linac consists of three styles of cryo-modules, containing focusing solenoids and varying number of SRF cavities for acceleration. Fringe fields of the solenoids and the focusing effects in the SRF cavities have significant impact on the transverse beam dynamics. Using an analytical formula, the effects of fringe fields are studied in MAD-X. The resulting betatron functions are compared with the results of beam dynamics simulations using OptiM code.

Occupational asthma in electronics workers caused by colophony fumes: follow-up of affected workers.

PubMed

Burge, P S

1982-05-01

Thirty-nine electronics workers were investigated by bronchial provocation testing to soldering fluxes containing colophony and were followed up one to four years later. At presentation and on follow-up each worker had nonspecific bronchial reactivity measured with inhaled histamine, and also had detailed measurements of lung function and estimation of total immunoglobulin levels. They completed a questionnaire designed to detect residual disability. The workers were divided into three groups. Twenty had left work after their initial diagnosis, eight had been moved to alternative work within their original factories, and 11 were thought to have asthma unrelated to colophony exposure as they failed to react to colophony at presentation. Histamine reactivity had returned to normal in half the workers who had left their original factories, but in only one worker who had moved within her original factory. This suggested that the nonspecific bronchial reactivity to histamine was the result rather than the cause of the occupational asthma, and that indirect exposure at work was sufficient to delay recovery of histamine reactivity. However, only two of the 20 affected workers who had left their original factories were symptom free on follow-up, and most had a considerable reduction in their quality of life by continuing asthma, which was particularly provoked by exercise, respiratory infections, and nonspecific irritants. Continuing symptoms may have been caused by domestic sources of colophony, or possibly the failure to eliminate colophony from the lungs.

Occupational asthma in electronics workers caused by colophony fumes: follow-up of affected workers.

PubMed Central

Burge, P S

1982-01-01

Thirty-nine electronics workers were investigated by bronchial provocation testing to soldering fluxes containing colophony and were followed up one to four years later. At presentation and on follow-up each worker had nonspecific bronchial reactivity measured with inhaled histamine, and also had detailed measurements of lung function and estimation of total immunoglobulin levels. They completed a questionnaire designed to detect residual disability. The workers were divided into three groups. Twenty had left work after their initial diagnosis, eight had been moved to alternative work within their original factories, and 11 were thought to have asthma unrelated to colophony exposure as they failed to react to colophony at presentation. Histamine reactivity had returned to normal in half the workers who had left their original factories, but in only one worker who had moved within her original factory. This suggested that the nonspecific bronchial reactivity to histamine was the result rather than the cause of the occupational asthma, and that indirect exposure at work was sufficient to delay recovery of histamine reactivity. However, only two of the 20 affected workers who had left their original factories were symptom free on follow-up, and most had a considerable reduction in their quality of life by continuing asthma, which was particularly provoked by exercise, respiratory infections, and nonspecific irritants. Continuing symptoms may have been caused by domestic sources of colophony, or possibly the failure to eliminate colophony from the lungs. PMID:7112471

Pulsed-focusing recirculating linacs for muon acceleration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Rolland

2014-12-31

Since the muon has a short lifetime, fast acceleration is essential for high-energy applications such as muon colliders, Higgs factories, or neutrino factories. The best one can do is to make a linear accelerator with the highest possible accelerating gradient to make the accelerating time as short as possible. However, the cost of such a single linear accelerator is prohibitively large due to expensive power sources, cavities, tunnels, and related infrastructure. As was demonstrated in the Thomas Jefferson Accelerator Facility (Jefferson Lab) Continuous Electron Beam Accelerator Facility (CEBAF), an elegant solution to reduce cost is to use magnetic return arcsmore » to recirculate the beam through the accelerating RF cavities many times, where they gain energy on each pass. In such a Recirculating Linear Accelerator (RLA), the magnetic focusing strength diminishes as the beam energy increases in a conventional linac that has constant strength quadrupoles. After some number of passes the focusing strength is insufficient to keep the beam from going unstable and being lost. In this project, the use of fast pulsed quadrupoles in the linac sections was considered for stronger focusing as a function of time to allow more successive passes of a muon beam in a recirculating linear accelerator. In one simulation, it was shown that the number of passes could be increased from 8 to 12 using pulsed magnet designs that have been developed and tested. This could reduce the cost of linac sections of a muon RLA by 8/12, where more improvement is still possible. The expense of a greater number of passes and corresponding number of return arcs was also addressed in this project by exploring the use of ramped or FFAG-style magnets in the return arcs. A better solution, invented in this project, is to use combined-function dipole-quadrupole magnets to simultaneously transport two beams of different energies through one magnet string to reduce costs of return arcs by almost a factor of two. A patent application was filed for this invention and a detailed report published in Physical Review Special Topics. A scaled model using an electron beam was developed and proposed to test the concept of a dog bone RLA with combined-function return arcs. The efforts supported by this grant were reported in a series of contributions to particle accelerator conferences that are reproduced in the appendices and summarized in the body of this report.« less

Front End for a neutrino factory or muon collider

NASA Astrophysics Data System (ADS)

Neuffer, D.; Snopok, P.; Alexahin, Y.

2017-11-01

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ 's produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a varphi -δ E rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an "HFOFO Snake" configuration that cools both μ+ and μ- transversely and longitudinally. The status of the design is presented and variations are discussed.

Front End for a neutrino factory or muon collider

DOE PAGES

Neuffer, David; Snopok, Pavel; Alexahin, Yuri

2017-11-30

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a Φ-δE rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both μ + and μ - transversely andmore » longitudinally. Finally, the status of the design is presented and variations are discussed.« less

Accomplishments of the heavy electron particle accelerator program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Stratakis, D.; Palmer, M.

The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy lepton colliders (HLCs) from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of νe (more » $$\\bar{ve}$$) and $$\\bar{vμ}$$ (νμ) beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components have been obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and the precise physics goals become apparent.« less

FFAGs: Front-end for neutrino factories and medical accelerators

NASA Astrophysics Data System (ADS)

Mori, Yoshiharu

The idea of Fixed Field Alternating Gradient (FFAG) accelerator was originated by different people and groups in the early 1950s. It was independently introduced by Ohkawa [Ohkawa (1953)], Symon et al. [Symon et al. (1956)], and Kolomensky [Kolomensky and Lebedev (1966)] when the strong Alternate Gradient (AG) focusing and the phase stability schemes were applied to particle acceleration. The first FFAG electron model was developed in the MURA accelerator project led by Kerst and Cole in the late 1950s. Since then, they have fabricated several electron models in the early 1960s [Symon et al. (1956)]. However, the studies did not lead to a single practical FFAG accelerator for the following 50 years. Because of the difficulties of treating non-linear magnetic field and RF acceleration for non-relativistic particles, the proton FFAG, especially, was not accomplished until recently. In 2000, the FFAG concept was revived with the world's first proton FFAG (POP) which was developed at KEK [Aiba (2000); Mori (1999)]. Since then, in many places [Berg (2004); Johnstone et al. (2004); Mori (2011); Ruggiero (2004); Trbojevic (2004)], FFAGs have been developed and constructed...

INO as atmospheric and magic baseline detector

NASA Astrophysics Data System (ADS)

Indumathi, D.

2011-10-01

We present a status report on the proposed India-based Neutrino Observatory (INO). We focus on the physics studies possible with an iron calorimeter detector (ICAL) at INO. Such a detector would make precision measurements of neutrino oscillation parameters with atmospheric neutrinos in the first phase with the possibility of acting as a far-end detector of a future neutrino factory or beta beam. This talk was given at the 12th International Workshop on Neutrino Factories, Super beams and Beta Beams, 2010 (Nufact10), in Oct 2010.

Exposing the dark sector with future Z factories

NASA Astrophysics Data System (ADS)

Liu, Jia; Wang, Lian-Tao; Wang, Xiao-Ping; Xue, Wei

2018-05-01

We investigate the prospects of searching dark sector models via exotic Z -boson decay at future e+e- colliders with Giga Z and Tera Z options. Four general categories of dark sector models, Higgs portal dark matter, vector-portal dark matter, inelastic dark matter, and axionlike particles, are considered. Focusing on channels motivated by the dark sector models, we carry out a model-independent study of the sensitivities of Z factories in probing exotic decays. The limits on branching ratios of the exotic Z decay are typically O (10-6- 10-8.5) for the Giga Z and O (10-7.5- 10-11) for the Tera Z , and they are compared with the projection for the high luminosity LHC. We demonstrate that future Z factories can provide its unique and leading sensitivity and highlight the complementarity with other experiments, including the indirect and direct dark matter search limits and the existing collider limits. Future Z factories will play a leading role in uncovering the hidden sector of the Universe in the future.

Tuberculosis in the workplace: developing partnerships with the garment industries in Bangladesh.

PubMed

Zafar Ullah, A N; Huque, R; Husain, A; Akter, S; Akter, H; Newell, J N

2012-12-01

To implement and evaluate a public-private partnership model involving garment factories to reduce the tuberculosis (TB) burden in this workforce. We used operational research to develop and evaluate a mechanism for effective and sustainable TB control in workplaces in three areas of Dhaka, Bangladesh. Strategies, protocols, guides and tools were developed with stakeholders. We assessed the impact of the project using quantitative and qualitative measures: changes in TB outcomes were calculated using standard indicators based on factory and DOTS centre records; changes in TB care-seeking behaviour were assessed using qualitative in-depth interviews with factory managers and medical personnel, and focus group discussions with factory workers, including TB patients. The project brought positive changes in knowledge, attitudes and practices of managers, workers and health care providers on TB care and control. During 2008-2010, a total of 3372 workers from a workforce of 69,000 were referred for sputum microscopy and 598 were diagnosed with smear-positive TB, 145 of whom received care at their workplace. The overall treatment success rate was 100%. It is feasible to engage factories in TB control activities in Bangladesh, and thereby increase case notifications and improve treatment outcomes.

Associations of Shift Work and Its Duration with Work-Related Injury among Electronics Factory Workers in South Korea.

PubMed

Ryu, Jia; Jung-Choi, Kyunghee; Choi, Kyung-Hwa; Kwon, Ho-Jang; Kang, Chungwon; Kim, Hyunjoo

2017-11-21

This study aimed to explore the association between shift work and work-related injuries. We collected data on workers from an electronics factory. This cross-sectional study included 13,610 subjects, who were assessed based on a self-reported questionnaire about their shift work experiences, work-related injuries, and other covariates. Multiple logistic regression models were used to evaluate the associations between shift work and work-related injuries and were estimated using the odds ratio. We found that the current and past shift workers, compared to non-shift workers, were associated with a 2.7- and 1.7-fold higher risk of work-related injury. There was a dose-response relationship between shift work duration and work-related injury among current female shift workers. Shift work increased the risk of work-related injuries, and the impact could be different depending on gender.

Cost effectiveness of ergonomic redesign of electronic motherboard.

PubMed

Sen, Rabindra Nath; Yeow, Paul H P

2003-09-01

A case study to illustrate the cost effectiveness of ergonomic redesign of electronic motherboard was presented. The factory was running at a loss due to the high costs of rejects and poor quality and productivity. Subjective assessments and direct observations were made on the factory. Investigation revealed that due to motherboard design errors, the machine had difficulty in placing integrated circuits onto the pads, the operators had much difficulty in manual soldering certain components and much unproductive manual cleaning (MC) was required. Consequently, there were high rejects and occupational health and safety (OHS) problems, such as, boredom and work discomfort. Also, much labour and machine costs were spent on repairs. The motherboard was redesigned to correct the design errors, to allow more components to be machine soldered and to reduce MC. This eliminated rejects, reduced repairs, saved US dollars 581495/year and improved operators' OHS. The customer also saved US dollars 142105/year on loss of business.

Associations of Shift Work and Its Duration with Work-Related Injury among Electronics Factory Workers in South Korea

PubMed Central

Ryu, Jia; Jung-Choi, Kyunghee; Choi, Kyung-Hwa; Kwon, Ho-Jang; Kang, Chungwon

2017-01-01

This study aimed to explore the association between shift work and work-related injuries. We collected data on workers from an electronics factory. This cross-sectional study included 13,610 subjects, who were assessed based on a self-reported questionnaire about their shift work experiences, work-related injuries, and other covariates. Multiple logistic regression models were used to evaluate the associations between shift work and work-related injuries and were estimated using the odds ratio. We found that the current and past shift workers, compared to non-shift workers, were associated with a 2.7- and 1.7-fold higher risk of work-related injury. There was a dose-response relationship between shift work duration and work-related injury among current female shift workers. Shift work increased the risk of work-related injuries, and the impact could be different depending on gender. PMID:29160849

Gendered bodies: recruitment, management and occupational health in northern Thailand's electronics factories.

PubMed

Theobald, Sally

2002-01-01

This paper explores workers' experiences and understandings of occupational health hazards in the electronics industries of northern Thailand. Women form the bulk of the lower-level workforce as operators responsible for assembling the parts that make up microchip components. Drawing data from 16 months of research in workers' dormitories, formal and informal interviews and questionnaire surveys, in this paper I explore how gender relations are central to the organization and experience of work in these industries. I identify "work process" health hazards resulting from the physical working environment, and "workplace" health hazards relating to the organizational and social pressures of the working environment. Musculoskeletal pain, eye strain, chemical exposure, stress, improper use of safety equipment and accidents all impact upon women workers' health. Additionally, risk behaviors such as amphetamine and alcohol use, and unprotected sex, are associated with the social context of factory work.

Korean Affairs Report No. 286

DTIC Science & Technology

1983-06-08

will attempt to destroy factories and industrial estab- lishments in Pusan, Masan, Taegu, Ulsan, Pohang, Kwangju and other major cities, it said... industry is expected to be intensified in the months to come with the Daewoo Electronic Co developing many new models since it took over the electric...The projected optical fiber communications systems will mark a milestone in the annals of the Korean electronic industry because automation in the

Team table: a framework and tool for continuous factory planning

NASA Astrophysics Data System (ADS)

Sihn, Wilfried; Bischoff, Juergen; von Briel, Ralf; Josten, Marcus

2000-10-01

Growing market turbulences and shorter product life cycles require a continuous adaptation of factory structures resulting in a continuous factory planning process. Therefore a new framework is developed which focuses on configuration and data management process integration. This enable an online system performance evaluation based on continuous availability of current data. The use of this framework is especially helpful and will guarantee high cost and time savings, when used in the early stages of the planning, called the concept or rough planning phase. The new framework is supported by a planning round table as a tool for team-based configuration processes integrating the knowledge of all persons involved in planning processes. A case study conducted at a German company shows the advantages which can be achieved by implementing the new framework and methods.

Straight A's: Public Education Policy and Progress. Volume 7, Number 21

ERIC Educational Resources Information Center

Amos, Jason, Ed.

2007-01-01

"Straight A's: Public Education Policy and Progress" is a biweekly newsletter that focuses on education news and events both in Washington, DC and around the country. The following articles are included in this issue: (1) Focus on Dropout Factories: Associated Press Article Spotlights Low-Performing High Schools, Draws Criticism from Many School…

A new programming metaphor for image processing procedures

NASA Technical Reports Server (NTRS)

Smirnov, O. M.; Piskunov, N. E.

1992-01-01

Most image processing systems, besides an Application Program Interface (API) which lets users write their own image processing programs, also feature a higher level of programmability. Traditionally, this is a command or macro language, which can be used to build large procedures (scripts) out of simple programs or commands. This approach, a legacy of the teletypewriter has serious drawbacks. A command language is clumsy when (and if! it attempts to utilize the capabilities of a multitasking or multiprocessor environment, it is but adequate for real-time data acquisition and processing, it has a fairly steep learning curve, and the user interface is very inefficient,. especially when compared to a graphical user interface (GUI) that systems running under Xll or Windows should otherwise be able to provide. ll these difficulties stem from one basic problem: a command language is not a natural metaphor for an image processing procedure. A more natural metaphor - an image processing factory is described in detail. A factory is a set of programs (applications) that execute separate operations on images, connected by pipes that carry data (images and parameters) between them. The programs function concurrently, processing images as they arrive along pipes, and querying the user for whatever other input they need. From the user's point of view, programming (constructing) factories is a lot like playing with LEGO blocks - much more intuitive than writing scripts. Focus is on some of the difficulties of implementing factory support, most notably the design of an appropriate API. It also shows that factories retain all the functionality of a command language (including loops and conditional branches), while suffering from none of the drawbacks outlined above. Other benefits of factory programming include self-tuning factories and the process of encapsulation, which lets a factory take the shape of a standard application both from the system and the user's point of view, and thus be used as a component of other factories. A bare-bones prototype of factory programming was implemented under the PcIPS image processing system, and a complete version (on a multitasking platform) is under development.

Neutrino factory

DOE PAGES

Bogomilov, M.; Matev, R.; Tsenov, R.; ...

2014-12-08

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable ofmore » making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.« less

Association between Emotional Symptoms and Job Demands in an Asian Electronics Factory.

PubMed

Huang, Wei-Lieh; Guo, Yue Leon; Chen, Pau-Chung; Wang, Jui; Chu, Po-Ching

2017-09-19

Various work-related issues including mental health have been described for the electronic industry. Although East Asian countries play important roles in the electronics industry, the association between job demands and emotional symptoms has been rarely examined. The present study recruited 603 workers from either office or clean room environments in an electronics factory in Taiwan. Their personal factors, work-related factors, and emotional symptoms were assessed by a self-administered questionnaire. The symptoms of depression and hostility were reported in 24.88% and 24.38% of the subjects, respectively, while 14.93% reported both. A multivariate analysis showed that, overall, women workers were more likely to have emotional symptoms than male workers (odds ration (OR) = 1.50, 95% CI = 1.02-2.18). Among clean room workers, working under high pressure (OR = 1.84, 95% CI = 1.05-3.21), conflicting demands (OR = 2.15, 95% CI = 1.30-3.57), and social isolation at work (OR = 2.99, 95% CI = 1.23-7.30) were associated with emotional symptoms. The findings suggest that in the Asian electronics industry, for women, working under high pressure, conflicting demands, and social isolation at work are risk factors for emotional symptoms, especially for clean room workers. Further large-scale, longitudinal studies are necessary to confirm and prevent the mental health problems in this fast-evolving, highly competitive industry.

Association between Emotional Symptoms and Job Demands in an Asian Electronics Factory

PubMed Central

Huang, Wei-Lieh; Guo, Yue Leon; Chen, Pau-Chung; Wang, Jui; Chu, Po-Ching

2017-01-01

Various work-related issues including mental health have been described for the electronic industry. Although East Asian countries play important roles in the electronics industry, the association between job demands and emotional symptoms has been rarely examined. The present study recruited 603 workers from either office or clean room environments in an electronics factory in Taiwan. Their personal factors, work-related factors, and emotional symptoms were assessed by a self-administered questionnaire. The symptoms of depression and hostility were reported in 24.88% and 24.38% of the subjects, respectively, while 14.93% reported both. A multivariate analysis showed that, overall, women workers were more likely to have emotional symptoms than male workers (odds ration (OR) = 1.50, 95% CI = 1.02–2.18). Among clean room workers, working under high pressure (OR = 1.84, 95% CI = 1.05–3.21), conflicting demands (OR = 2.15, 95% CI = 1.30–3.57), and social isolation at work (OR = 2.99, 95% CI = 1.23–7.30) were associated with emotional symptoms. The findings suggest that in the Asian electronics industry, for women, working under high pressure, conflicting demands, and social isolation at work are risk factors for emotional symptoms, especially for clean room workers. Further large-scale, longitudinal studies are necessary to confirm and prevent the mental health problems in this fast-evolving, highly competitive industry. PMID:28925986

Introduction of home electronics for the future

NASA Astrophysics Data System (ADS)

Yoshimoto, Hideyuki; Shirai, Iwao

Development of electronics has accelerated the automation and labor saving at factories and offices. Home electronics is also expected to be needed more and more in Japan towards the 21st century, as the advanced information society and the elderly society will be accelerated, and women's participation in social affairs will be increased. Resources Council, which is the advisory organ of the Minister of State for Science and Technology, forecast to what extent home electronics will be popularized by the year of 2010. The Council expected to promote home electronics, because resource and energy saving should be accelerated and people should enjoy much more their individual lives at home.

Engineering tolerance to industrially relevant stress factors in yeast cell factories.

PubMed

Deparis, Quinten; Claes, Arne; Foulquié-Moreno, Maria R; Thevelein, Johan M

2017-06-01

The main focus in development of yeast cell factories has generally been on establishing optimal activity of heterologous pathways and further metabolic engineering of the host strain to maximize product yield and titer. Adequate stress tolerance of the host strain has turned out to be another major challenge for obtaining economically viable performance in industrial production. Although general robustness is a universal requirement for industrial microorganisms, production of novel compounds using artificial metabolic pathways presents additional challenges. Many of the bio-based compounds desirable for production by cell factories are highly toxic to the host cells in the titers required for economic viability. Artificial metabolic pathways also turn out to be much more sensitive to stress factors than endogenous pathways, likely because regulation of the latter has been optimized in evolution in myriads of environmental conditions. We discuss different environmental and metabolic stress factors with high relevance for industrial utilization of yeast cell factories and the experimental approaches used to engineer higher stress tolerance. Improving stress tolerance in a predictable manner in yeast cell factories should facilitate their widespread utilization in the bio-based economy and extend the range of products successfully produced in large scale in a sustainable and economically profitable way. © FEMS 2017.

Engineering tolerance to industrially relevant stress factors in yeast cell factories

PubMed Central

Deparis, Quinten; Claes, Arne; Foulquié-Moreno, Maria R.

2017-01-01

Abstract The main focus in development of yeast cell factories has generally been on establishing optimal activity of heterologous pathways and further metabolic engineering of the host strain to maximize product yield and titer. Adequate stress tolerance of the host strain has turned out to be another major challenge for obtaining economically viable performance in industrial production. Although general robustness is a universal requirement for industrial microorganisms, production of novel compounds using artificial metabolic pathways presents additional challenges. Many of the bio-based compounds desirable for production by cell factories are highly toxic to the host cells in the titers required for economic viability. Artificial metabolic pathways also turn out to be much more sensitive to stress factors than endogenous pathways, likely because regulation of the latter has been optimized in evolution in myriads of environmental conditions. We discuss different environmental and metabolic stress factors with high relevance for industrial utilization of yeast cell factories and the experimental approaches used to engineer higher stress tolerance. Improving stress tolerance in a predictable manner in yeast cell factories should facilitate their widespread utilization in the bio-based economy and extend the range of products successfully produced in large scale in a sustainable and economically profitable way. PMID:28586408

Indoor radon levels in workplaces of Adapazarı, north-western Turkey

NASA Astrophysics Data System (ADS)

Kapdan, Enis; Altinsoy, Nesrin

2014-02-01

The main objective of this study is to assess the health hazards due to radon gas accumulation and to compare the concentrations in different kinds of workplaces, in the city of Adapazarı, one of the most important industrial cities of Turkey. For this purpose, radon activity concentration measurements were carried out in schools, factories, offices and outdoors using CR-39 solid state nuclear track detectors (SSNTD). Results show that the mean radon activity concentrations (RAC) in schools, offices and factories were found to be 66, 76 and 27 Bq/m3, respectively, with an outdoor concentration of 14 Bq/m3. The average concentrations were found to decrease as follows for different types of industries: automotive > electronic > metal > textile. Because the maximum measured radon concentrations are 151 Bq/m3 in the schools, 173 Bq/m3 in the offices and 52 Bq/m3 in the factories, the limits of ICRP are not exceeded in any of the buildings in the region. In addition, the estimated mean annual effective doses to the people in the workplace, students, office workers and factory workers have been calculated as 0.27, 0.63 and 0.20 mSv/y, respectively for the region.

App Factory: A flexible approach to rehabilitation engineering in an era of rapid technology advancement.

PubMed

Jones, Michael; Mueller, James; Morris, John

2017-01-01

This article describes a flexible and effective approach to research and development in an era of rapid technological advancement. The approach relies on secondary dispersal of grant funds to commercial developers through a competitive selection process. This "App Factory" model balances the practical reliance on multi-year funding needed to sustain a rehabilitation engineering research center (RERC), with the need for agility and adaptability of development efforts undertaken in a rapidly changing technology environment. This approach also allows us to take advantage of technical expertise needed to accomplish a particular development task, and provides incentives to deliver successful products in a cost-effective manner. In this article, we describe the App Factory structure, process, and results achieved to date; and we discuss the lessons learned and the potential relevance of this approach for other grant-funded research and development efforts. Data presented on the direct costs and number of downloads of the 16 app development projects funded in the App Factory's first 3 years show that it can be an effective means for supporting focused, short-term assistive technology development projects.

On the energy and baseline optimization to study effects related to the /δ-phase (CP-/T-violation) in neutrino oscillations at a neutrino factory

NASA Astrophysics Data System (ADS)

Bueno, A.; Campanelli, M.; Navas-Concha, S.; Rubbia, A.

2002-06-01

In this paper we discuss the detection of CP- and T-violation effects in the framework of a neutrino factory. We introduce three quantities, which are good discriminants for a non-vanishing complex phase ( δ) in the 3×3 neutrino mixing matrix: Δδ, ΔCP and ΔT. We find that these three discriminants (in vacuum) all scale with L/ Eν, where L is the baseline and Eν the neutrino energy. Matter effects modify the scaling, but these effects are large enough to spoil the sensitivity only for baselines larger than 5000 km. So, in the hypothesis of constant neutrino factory power (i.e., number of muons inversely proportional to muon energy), the sensitivity on the δ-phase is independent of the baseline chosen. Specially interesting is the direct measurement of T-violation from the "wrong-sign" electron channel (i.e., the ΔT discriminant), which involves a comparison of the νe→ νμ and νμ→ νe oscillation rates. However, the νμ→ νe measurement requires magnetic discrimination of the electron charge, experimentally very challenging in a neutrino detector. Since the direction of the electron curvature has to be estimated before the start of the electromagnetic shower, low-energy neutrino beams and hence short baselines, are preferred. In this paper we show, as an example, the exclusion regions in the Δm212- δ plane using the ΔCP and ΔT discriminants for two concrete cases keeping the same L/ Eν ratio (730 km/7.5 GeV and 2900 km/30 GeV). We obtain a similar excluded region provided that the electron detection efficiency is ˜20% and the charge confusion 0.1%. The Δm212 compatible with the LMA solar data can be tested with a flux of 5×10 21 muons. We compare these results with the fit of the visible energy distributions.

Entity Relation Detection with Factorial Hidden Markov Models and Maximum Entropy Discriminant Latent Dirichlet Allocations

ERIC Educational Resources Information Center

Li, Dingcheng

2011-01-01

Coreference resolution (CR) and entity relation detection (ERD) aim at finding predefined relations between pairs of entities in text. CR focuses on resolving identity relations while ERD focuses on detecting non-identity relations. Both CR and ERD are important as they can potentially improve other natural language processing (NLP) related tasks…

Promoting contraceptive use among unmarried female migrants in one factory in Shanghai: a pilot workplace intervention.

PubMed

Qian, Xu; Smith, Helen; Huang, Wenyuan; Zhang, Jie; Huang, Ying; Garner, Paul

2007-05-31

In urban China, more single women are becoming pregnant and resorting to induced abortion, despite the wide availability of temporary methods of contraception. We developed and piloted a workplace-based intervention to promote contraceptive use in unmarried female migrants working in privately owned factories. Quasi-experimental design. In consultation with clients, we developed a workplace based intervention to promote contraception use in unmarried female migrants in a privately owned factory. We then implemented this in one factory, using a controlled before-and-after design. The intervention included lectures, bespoke information leaflets, and support to the factory doctors in providing a contraceptive service. 598 women participated: most were under 25, migrants to the city, with high school education. Twenty percent were lost when staff were made redundant, and implementation was logistically complicated. All women attended the initial lecture, and just over half the second lecture. Most reported reading the educational material provided (73%), but very few women reported using the free family planning services offered at the factory clinic (5%) or the Family Planning Institute (3%). At baseline, 90% (N = 539) stated that contraceptives were required if having sex before marriage; of those reporting sex in the last three months, the majority reporting using contraceptives (78%, 62/79) but condom use was low (44%, 35/79). Qualitative data showed that the reading material seemed to be popular and young women expressed a need for more specific reproductive health information, particularly on HIV/AIDS. Women wanted services with some privacy and anonymity, and views on the factory service were mixed. Implementing a complex intervention with a hard to reach population through a factory in China, using a quasi-experimental design, is not easy. Further research should focus on the specific needs and service preferences of this population and these should be considered in any policy reform so that contraceptive use may be encouraged among young urban migrant workers.

Factors related to the practice of breast self examination (BSE) and Pap smear screening among Malaysian women workers in selected electronics factories

PubMed Central

Chee, HL; Rashidah, S; Shamsuddin, K; Intan, O

2003-01-01

Background The Malaysian Ministry of Health promotes breast self-examination (BSE) for all women, and Pap smear screening every three years for all sexually active women ages 20 years and above. The objectives of this paper were to examine the practice of these two screening tests among women production workers in electronics factories, and to identify factors related to practice. Methods This was a cross-sectional survey of women production workers from ten electronics factories. Data was collected by a self-administered questionnaire from a total of 1,720 women. The chi-square test, odds ratio and binomial logistic regression were used in bivariate and multivariate analysis. Results Prevalence rates were 24.4% for BSE once a month, and 18.4% for Pap smear examination within the last three years. Women who were significantly more likely to perform BSE every month were 30 years and older, Malays, with upper secondary education and above, answered the BSE question correctly, and had a Pap smear within the last three years. The proportion of women who had a Pap smear within the last three years were significantly higher among those who were older, married, with young children, on the contraceptive pill or intra-uterine device, had a medical examination within the last five years, answered the Pap smear question correctly, and performed BSE monthly. Conclusion Screening practice rates in this study were low when compared to national rates. Socio-demographic and health care factors significantly associated with screening practice are indicative of barriers which should be further understood so that more effective educational and promotional strategies could be developed. PMID:12769827

Body mass index and factors related to overweight among women workers in electronic factories in Peninsular Malaysia.

PubMed

Chee, Heng-Leng; Kandiah, Mirnalini; Khalid, Maimunah; Shamsuddin, Khadijah; Jamaluddin, Jamilah; Nordin, Nor Anita Megat Mohd; Shuib, Rashidah; Osman, Intan

2004-01-01

Factors related to overweight were examined in a cross-sectional survey that included 1612 women workers from 10 large electronics assembly factories in Peninsular Malaysia. Respondents were Malaysian citizens, direct production workers below the supervisory level, and had worked at least a year in the factory where they were presently employed. Heights and weights were taken to calculate the body mass index (BMI). Weights and BMI increased with increasing age. After adjusting for age, odds ratios for overweight were significantly raised for married women in relation to not married women (OR 1.5, 95% CI=1.15-2.02), lower secondary education in relation to higher than upper secondary education (OR 1.8, 95% CI=1.06-3.14), monthly income RM800-999 (OR 1.7, 95% CI=1.21-2.45) and >/=RM1,000 (OR 1.8, 95% CI=1.23-2.72) in relation to

[Papers of the ELF Project].

ERIC Educational Resources Information Center

Barker, Philip; And Others

The five papers in this collection discuss various aspects of the Electronic Learning-Package Factory (ELF) project at the University of Bradford in England. In the first paper, "Adoption of CAL in Higher Education: A Cooperative Approach to Research, Development and Implementation," Philip Barker considers the opportunities for…

Rapid Prototyping of Microbial Cell Factories via Genome-scale Engineering

PubMed Central

Si, Tong; Xiao, Han; Zhao, Huimin

2014-01-01

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. PMID:25450192

Thermal photons in heavy ion collisions at 158 A GeV

NASA Astrophysics Data System (ADS)

Dutt, Sunil

2018-05-01

The essence of experimental ultra-relativistic heavy ion collision physics is the production and study of strongly interacting matter at extreme energy densities, temperatures and consequent search for equation of state of nuclear matter. The focus of the analysis has been to examine pseudo-rapidity distributions obtained for the γ-like particles in pre-shower photon multiplicity detector. This allows the extension of scaled factorial moment analysis to bin sizes smaller than those accessible to other experimental techniques. Scaled factorial moments are calculated using horizontal corrected and vertical analysis. The results are compared with simulation analysis using VENUS event generator.

Architecture and biogenesis of plus-strand RNA virus replication factories

PubMed Central

Paul, David; Bartenschlager, Ralf

2013-01-01

Plus-strand RNA virus replication occurs in tight association with cytoplasmic host cell membranes. Both, viral and cellular factors cooperatively generate distinct organelle-like structures, designated viral replication factories. This compartmentalization allows coordination of the different steps of the viral replication cycle, highly efficient genome replication and protection of the viral RNA from cellular defense mechanisms. Electron tomography studies conducted during the last couple of years revealed the three dimensional structure of numerous plus-strand RNA virus replication compartments and highlight morphological analogies between different virus families. Based on the morphology of virus-induced membrane rearrangements, we propose two separate subclasses: the invaginated vesicle/spherule type and the double membrane vesicle type. This review discusses common themes and distinct differences in the architecture of plus-strand RNA virus-induced membrane alterations and summarizes recent progress that has been made in understanding the complex interplay between viral and co-opted cellular factors in biogenesis and maintenance of plus-strand RNA virus replication factories. PMID:24175228

Changing Gender Norms and Reducing HIV and Violence Risk Among Workers and Students in China.

PubMed

Pulerwitz, Julie; Hui, Wang; Arney, Jennifer; Scott, Lisa Mueller

2015-08-01

Global evidence demonstrates that inequitable gender norms negatively influence key health outcomes (e.g., violence, HIV/STI), and the importance of male involvement in prevention efforts. The China Family Planning Association and PATH partnered to develop and evaluate a gender-focused behavior change communication intervention for HIV and violence prevention. Eight participatory education sessions-adapted for the Chinese setting-were implemented in factories and schools. Baseline and endline surveys with participants (219 male factory workers and 496 male vocational students) were conducted. Support for (in)equitable norms was measured by the Gender Equitable Men Scale, as well as partner violence and communication. Focus groups with male and female workers/students, teachers, and factory managers were used to corroborate findings. At baseline, many workers and students supported inequitable gender norms, with workers generally being more inequitable. At endline, significant positive changes in gender-related views (e.g., reduction from 42% to 18% of workers agreeing that "a woman should tolerate violence in order to keep her family together") and behaviors (e.g., reduction from 15% to 7% of students reporting partner violence over the past 3 months) were reported. Results suggest that a relatively low intensity intervention can influence important gender norms and related behaviors.

Family context assessment in a public health study.

PubMed

Velasco, David; Sánchez de Miguel, Manuel; Egurza, Maitane; Arranz, Enrique; Aranbarri, Aritz; Fano, Eduardo; Ibarluzea, Jesús

2014-01-01

To analyze the factorial structure of a new instrument to assess the quality of the family context (Etxadi-Gangoiti Scale) in a sample from the Gipuzkoa cohort of the Environment and Childhood (Infancia y Medio Ambiente [INMA]) study. Families in a sample of 433 two-year-old children were assessed in a home visit with subsequent analysis of the factorial structure and psychometric properties of the data. An exploratory factorial analysis (principal axis factoring and varimax rotation) and a confirmatory factorial analysis were carried out; partial confirmation of the original factorial structure of the instrument was obtained, which revealed the following factorial structures. Subscale (1): promotion of cognitive and linguistic development, social skills, psychomotor skills, and pretend play and imitation; subscale (2): promotion of independence and self-esteem, provision of optimal frustration, social and emotional quality of the relationship, and absence of physical punishment; subscale (3): paternal involvement, low exposure to family conflict, low frequency of family conflict, relationship with the extended family, social support, diversity of experiences, low frequency of stressful events, and low parental perception of stress. The structure of the original instrument structure was partially confirmed, which was attributed to the characteristics of the sample. We stress the importance of the variability obtained in the evaluation of the families, as well as of adequate indicators of reliability in such evaluation. The new instrument could be used in public health to identify deficient family contexts and to design preventive interventions focused on parenting skills. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Benzimidazoles: an ideal privileged drug scaffold for the design of multitargeted anti-inflammatory ligands.

PubMed

Kaur, Gaganpreet; Kaur, Maninder; Silakari, Om

2014-01-01

The recent research area endeavors to discover ultimate multi-target ligands, an increasingly feasible and attractive alternative to existing mono-targeted drugs for treatment of complex, multi-factorial inflammation process which underlays plethora of debilitated health conditions. In order to improvise this option, exploration of relevant chemical core scaffold will be an utmost need. Privileged benzimidazole scaffold being historically versatile structural motif could offer a viable starting point in the search for novel multi-target ligands against multi-factorial inflammation process since, when appropriately substituted, it can selectively modulate diverse receptors, pathways and enzymes associated with the pathogenesis of inflammation. Despite this remarkable capability, the multi-target capacity of the benzimidazole scaffold remains largely unexploited. With this in focus, the present review article attempts to provide synopsis of published research to exemplify the valuable use of benzimidazole nucleus and focus on their suitability as starting scaffold to develop multi-targeted anti-inflammatory ligands.

The Plight of Manufacturing: What Can Be Done?

ERIC Educational Resources Information Center

Cyert, Richard M.

1985-01-01

Proposes that full automation is the best current option for the United States' manufacturing industries. Advocates increased use of electronics, robotics, and computers in the establishment of unmanned factories. Implications of this movement are examined in terms of labor, management, and the structure of the economy. (ML)

Membranous Replication Factories Induced by Plus-Strand RNA Viruses

PubMed Central

Romero-Brey, Inés; Bartenschlager, Ralf

2014-01-01

In this review, we summarize the current knowledge about the membranous replication factories of members of plus-strand (+) RNA viruses. We discuss primarily the architecture of these complex membrane rearrangements, because this topic emerged in the last few years as electron tomography has become more widely available. A general denominator is that two “morphotypes” of membrane alterations can be found that are exemplified by flaviviruses and hepaciviruses: membrane invaginations towards the lumen of the endoplasmatic reticulum (ER) and double membrane vesicles, representing extrusions also originating from the ER, respectively. We hypothesize that either morphotype might reflect common pathways and principles that are used by these viruses to form their membranous replication compartments. PMID:25054883

The chemical and oxidation characteristics of semi-dry flue gas desulfurization ash from a steel factory.

PubMed

Liu, Ren-ping; Guo, Bin; Ren, Ailing; Bian, Jing-feng

2010-10-01

Some samples of semi-dry flue gas desulfurization (FGD) ash were taken from sinter gas of a steel factory. Scanning electron microscope (SEM) and X-ray diffraction (XRD) analyses were employed to identify the samples in order to investigate their physical and chemical characteristics. The results show that semi-dry FGD ash from a steel factory is stable under atmospheric conditions. It has irregular shape, a smooth surface and loose construction. The size of FGD ash particles is around 0.5-25 µm, the average size is about 5 µm and the median diameter is 4.18 µm. Semi-dry FGD ash from a steel factory consists of CaSO₃, CaSO₄, CaCO₃, some amorphous vitreous material and unburned carbon. An experimental method was found to study the oxidation characteristics of ash. A prediction model of the oxidation efficiency was obtained based on response surface methodology. The results show that not only the temperature, but also gas:solid ratio, play an important role in influencing the oxidation efficiency. The interactions of the gas:solid ratio with temperature play an essential role. An improved response surface model was obtained which can be helpful to describe the degree of oxidation efficiency of semi-dry FGD ash.

Knowledge, attitudes and beliefs about HIV infection and AIDS among healthy factory workers and their wives, Kinshasa, Zaire.

PubMed

Irwin, K; Bertrand, J; Mibandumba, N; Mbuyi, K; Muremeri, C; Mukoka, M; Munkolenkole, K; Nzilambi, N; Bosenge, N; Ryder, R

1991-01-01

As a first step in designing an AIDS prevention program at a large factory in Kinshasa, Zaire, we collected information on attitudes towards human immunodeficiency virus (HIV) infection and acquired immunodeficiency syndrome (AIDS) from factory foremen and their wives. Trained moderators conducted twelve focus group discussions (from November through December 1987) that addressed knowledge, attitudes and beliefs about HIV infection and AIDS. In general, participants were familiar with HIV infection and AIDS and considered these conditions leading health problems in Kinshasa. Although participants had a fairly accurate understanding of the causes of HIV infection, modes of transmission and preventive measures, many myths and misconceptions existed. Many participants did not believe that condom use would consistently prevent infection through sexual intercourse. Participants strongly favored the counseling of seropositive persons but showed less consensus about whether the spouse of a seropositive person should be notified of the partner's test result. Participants predicted that couples in which one member is seropositive and the other is not would experience marital discord and friction with family, neighbors and co-workers. These findings were applied to the development of a counseling and educational program for seropositive factory employees and their spouses.

Advances of Air Pollution Science: From Forest Decline to Multiple-Stress Effects on Forest Ecosystem Services

Treesearch

E. Paoletti; M. Schaub; R. Matyssek; G. Wieser; A. Augustaitis; A. M. Bastrup-Birk; A. Bytnerowicz; M. S. Gunthardt-Goerg; G. Muller-Starck; Y. Serengil

2010-01-01

Over the past 20 years, the focus of forest science on air pollution has moved from forest decline to a holistic framework of forest health, and from the effects on forest production to the ecosystem services provided by forest ecosystems. Hence, future research should focus on the interacting factorial impacts and resulting antagonistic and synergistic responses of...

Dust exposure and chronic respiratory symptoms among coffee curing workers in Kilimanjaro: a cross sectional study.

PubMed

Sakwari, Gloria; Bråtveit, Magne; Mamuya, Simon H D; Moen, Bente E

2011-11-24

Coffee processing causes organic dust exposure which may lead to development of respiratory symptoms. Previous studies have mainly focused on workers involved in roasting coffee in importing countries. This study was carried out to determine total dust exposure and respiratory health of workers in Tanzanian primary coffee-processing factories. A cross sectional study was conducted among 79 workers in two coffee factories, and among 73 control workers in a beverage factory. Personal samples of total dust (n = 45 from the coffee factories and n = 19 from the control factory) were collected throughout the working shift from the breathing zone of the workers. A questionnaire with modified questions from the American Thoracic Society questionnaire was used to assess chronic respiratory symptoms. Differences between groups were tested by using independent t-tests and Chi square tests. Poisson Regression Model was used to estimate prevalence ratio, adjusting for age, smoking, presence of previous lung diseases and years worked in dusty factories. All participants were male. The coffee workers had a mean age of 40 years and were older than the controls (31 years). Personal total dust exposure in the coffee factories were significantly higher than in the control factory (geometric mean (GM) 1.23 mg/m3, geometric standard deviation (GSD) (0.8) vs. 0.21(2.4) mg/m3). Coffee workers had significantly higher prevalence than controls for cough with sputum (23% vs. 10%; Prevalence ratio (PR); 2.5, 95% CI 1.0-5.9) and chest tightness (27% vs. 13%; PR; 2.4, 95% CI 1.1-5.2). The prevalence of morning cough, cough with and without sputum for 4 days or more in a week was also higher among coffee workers than among controls. However, these differences were not statistically significant. Workers exposed to coffee dust reported more respiratory symptoms than did the controls. This might relate to their exposure to coffee dust. Interventions for reduction of dust levels and provision of respiratory protective equipment are recommended.

Dust exposure and chronic respiratory symptoms among coffee curing workers in Kilimanjaro: a cross sectional study

PubMed Central

2011-01-01

Background Coffee processing causes organic dust exposure which may lead to development of respiratory symptoms. Previous studies have mainly focused on workers involved in roasting coffee in importing countries. This study was carried out to determine total dust exposure and respiratory health of workers in Tanzanian primary coffee-processing factories. Methods A cross sectional study was conducted among 79 workers in two coffee factories, and among 73 control workers in a beverage factory. Personal samples of total dust (n = 45 from the coffee factories and n = 19 from the control factory) were collected throughout the working shift from the breathing zone of the workers. A questionnaire with modified questions from the American Thoracic Society questionnaire was used to assess chronic respiratory symptoms. Differences between groups were tested by using independent t-tests and Chi square tests. Poisson Regression Model was used to estimate prevalence ratio, adjusting for age, smoking, presence of previous lung diseases and years worked in dusty factories. Results All participants were male. The coffee workers had a mean age of 40 years and were older than the controls (31 years). Personal total dust exposure in the coffee factories were significantly higher than in the control factory (geometric mean (GM) 1.23 mg/m3, geometric standard deviation (GSD) (0.8) vs. 0.21(2.4) mg/m3). Coffee workers had significantly higher prevalence than controls for cough with sputum (23% vs. 10%; Prevalence ratio (PR); 2.5, 95% CI 1.0 - 5.9) and chest tightness (27% vs. 13%; PR; 2.4, 95% CI 1.1 - 5.2). The prevalence of morning cough, cough with and without sputum for 4 days or more in a week was also higher among coffee workers than among controls. However, these differences were not statistically significant. Conclusion Workers exposed to coffee dust reported more respiratory symptoms than did the controls. This might relate to their exposure to coffee dust. Interventions for reduction of dust levels and provision of respiratory protective equipment are recommended. PMID:22114929

Microbial Consortia Engineering for Cellular Factories: in vitro to in silico systems

PubMed Central

Bernstein, Hans C; Carlson, Ross P

2012-01-01

This mini-review discusses the current state of experimental and computational microbial consortia engineering with a focus on cellular factories. A discussion of promising ecological theories central to community resource usage is presented to facilitate interpretation of consortial designs. Recent case studies exemplifying different resource usage motifs and consortial assembly templates are presented. The review also highlights in silico approaches to design and to analyze consortia with an emphasis on stoichiometric modeling methods. The discipline of microbial consortia engineering possesses a widely accepted potential to generate highly novel and effective bio-catalysts for applications from biofuels to specialty chemicals to enhanced mineral recovery. PMID:24688677

Rapid prototyping of microbial cell factories via genome-scale engineering.

PubMed

Si, Tong; Xiao, Han; Zhao, Huimin

2015-11-15

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. Copyright © 2014 Elsevier Inc. All rights reserved.

NUCLEAR FACTOR-Y: still complex after all these years?

PubMed

Myers, Zachary A; Holt, Ben F

2018-06-11

The NUCLEAR FACTOR-Y (NF-Y) families of transcription factors are important regulators of plant development and physiology. Though NF-Y regulatory roles have recently been suggested for numerous aspects of plant biology, their roles in flowering time, early seedling development, stress responses, hormone signaling, and nodulation are the best characterized. The past few years have also seen significant advances in our understanding of the mechanistic function of the NF-Y, and as such, increasingly complex and interesting questions are now more approachable. This review will primarily focus on these developmental, physiological, and mechanistic roles of the NF-Y in recent research. Copyright © 2018 Elsevier Ltd. All rights reserved.

Compact scanning transmission x-ray microscope at the photon factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeichi, Yasuo, E-mail: yasuo.takeichi@kek.jp; Inami, Nobuhito; Ono, Kanta

We report the design and performance of a compact scanning transmission X-ray microscope developed at the Photon Factory. Piezo-driven linear stages are used as coarse stages of the microscope to realize excellent compactness, mobility, and vibrational and thermal stability. An X-ray beam with an intensity of ∼10{sup 7} photons/s was focused to a diameter of ∼40 nm at the sample. At the soft X-ray undulator beamline used with the microscope, a wide range of photon energies (250–1600 eV) is available. The microscope has been used to research energy materials and in environmental sciences.

Moving the factory into orbit

NASA Technical Reports Server (NTRS)

Dannenfelser, Robert, Jr.

1986-01-01

Prompted by the attention focused on the Space Shuttle Program's cost and safety problems and the publicity surrounding the intended U.S. space station, a review is given of the status of efforts being made to use space as a commercial manufacturing environment.

The design and construction of the MICE Electron-Muon Ranger

NASA Astrophysics Data System (ADS)

Asfandiyarov, R.; Bene, P.; Blondel, A.; Bolognini, D.; Cadoux, F.; Debieux, S.; Drielsma, F.; Giannini, G.; Graulich, J. S.; Husi, C.; Karadzhov, Y.; Lietti, D.; Masciocchi, F.; Nicola, L.; Noah Messomo, E.; Prest, M.; Rothenfusser, K.; Sandstrom, R.; Vallazza, E.; Verguilov, V.; Wisting, H.

2016-10-01

The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter installed in the beam line of the Muon Ionization Cooling Experiment (MICE). The experiment will demonstrate ionization cooling, an essential technology needed for the realization of a Neutrino Factory and/or a Muon Collider. The EMR is designed to measure the properties of low energy beams composed of muons, electrons and pions, and perform the identification particle-by-particle. The detector consists of 48 orthogonal layers of 59 triangular scintillator bars. The readout is implemented using FPGA custom made electronics and commercially available modules. This article describes the construction of the detector from its design up to its commissioning with cosmic data.

Unblocking brainstorms.

PubMed

Gallupe, R B; Bastianutti, L M; Cooper, W H

1991-02-01

Brainstorming groups have consistently produced fewer ideas than have the equivalent number of individuals working by themselves. These results have been attributed to social loafing, evaluation apprehension, and production blocking in groups. In this study, a new brainstorming technique--electronic brainstorming--that may reduce both production blocking and evaluation apprehension was assessed. Electronic and nonelectronic groups and nominal and interacting groups were compared in a 2 x 2 factorial design. Electronic groups were more productive than nonelectronic groups, but the productivity of nominal and interacting groups did not differ. In contrast, interacting groups felt better about the idea-generation process than did nominal groups. Ways in which electronic brainstorming can reopen a long dormant area of research and application are discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. This work is part of a multiphase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall designmore » with exterior continuous insulation (CI). This report describes Phase 3, which was completed in two stages and continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

The discovery reach of CP violation in neutrino oscillation with non-standard interaction effects

NASA Astrophysics Data System (ADS)

Rahman, Zini; Dasgupta, Arnab; Adhikari, Rathin

2015-06-01

We have studied the CP violation discovery reach in a neutrino oscillation experiment with superbeam, neutrino factory and monoenergetic neutrino beam from the electron capture process. For NSI satisfying model-dependent bound for shorter baselines (like CERN-Fréjus set-up) there is insignificant effect of NSI on the the discovery reach of CP violation due to δ. Particularly, for the superbeam and neutrino factory we have also considered relatively longer baselines for which there could be significant NSI effects on CP violation discovery reach for higher allowed values of NSI. For the monoenergetic beam only shorter baselines are considered to study CP violation with different nuclei as neutrino sources. Interestingly for non-standard interactions—{{\\varepsilon }eμ } and {{\\varepsilon }eτ } of neutrinos with matter during propagation in longer baselines in the superbeam, there is the possibility of better discovery reach of CP violation than that with only Standard Model interactions of neutrinos with matter. For complex NSI we have shown the CP violation discovery reach in the plane of Dirac phase δ and NSI phase {{φ }ij}. The CP violation due to some values of δ remain unobservable with present and near future experimental facilities in the superbeam and neutrino factory. However, in the presence of some ranges of off-diagonal NSI phase values there are some possibilities of discovering total CP violation for any {{δ }CP} value even at 5σ confidence level for neutrino factory. Our analysis indicates that for some values of NSI phases total CP violation may not be at all observable for any values of δ. Combination of shorter and longer baselines could indicate in some cases the presence of NSI. However, in general for NSIs ≲ 1 the CP violation discovery reach is better in neutrino factory set-ups. Using a neutrino beam from the electron capture process for nuclei 50110Sn and 152Yb, we have shown the discovery reach of CP violation in a neutrino oscillation experiment. Particularly for 50110Sn nuclei CP violation could be found for about 51% of the possible δ values for a baseline of 130 km with boost factor γ =500. Although the nuclei 152Yb is technically more feasible for the production of a mono-energetic beam, it is found to be unsuitable in obtaining good discovery reach of CP violation.

Improvement of productivity in low volume production industry layout by using witness simulation software

NASA Astrophysics Data System (ADS)

Jaffrey, V.; Mohamed, N. M. Z. N.; Rose, A. N. M.

2017-10-01

In almost all manufacturing industry, increased productivity and better efficiency of the production line are the most important goals. Most factories especially small scale factory has less awareness of manufacturing system optimization and lack of knowledge about it and uses the traditional way of management. Problems that are commonly identified in the factory are a high idle time of labour and also small production. This study is done in a Small and Medium Enterprises (SME) low volume production company. Data collection and problems affecting productivity and efficiency are identified. In this study, Witness simulation software is being used to simulate the layout and the output is focusing on the improvement of layout in terms of productivity and efficiency. In this study, the layout is rearranged by reducing the travel time from a workstation to another workstation. Then, the improved layout is modelled and the machine and labour statistic of both, original and improved layout is taken. Productivity and efficiency are calculated for both layout and then being compared.

Role of growth hormone, insulin-like growth factor-I, and insulin-like growth factor binding proteins in the catabolic response to injury and infection.

PubMed

Lang, Charles H; Frost, Robert A

2002-05-01

The erosion of lean body mass resulting from protracted critical illness remains a significant risk factor for increased morbidity and mortality in this patient population. Previous studies have documented the well known impairment in nitrogen balance results from both an increase in muscle protein degradation as well as a decreased rate of both myofibrillar and sacroplasmic protein synthesis. This protein imbalance may be caused by an increased presence or activity of various catabolic agents, such as tumor necrosis factor-alpha, interleukin-1 beta, interleukin-6 or glucocorticoids, or may be mediated via a decreased concentration or responsiveness to various anabolic hormones, such as growth hormone or insulin-like growth factor-I. This review focuses on recent developments pertaining to the importance of alterations in the growth hormone-insulin-like growth factor-I axis as a mechanism for the observed defects in muscle protein balance.

Transporter engineering in biomass utilization by yeast.

PubMed

Hara, Kiyotaka Y; Kobayashi, Jyumpei; Yamada, Ryosuke; Sasaki, Daisuke; Kuriya, Yuki; Hirono-Hara, Yoko; Ishii, Jun; Araki, Michihiro; Kondo, Akihiko

2017-11-01

Biomass resources are attractive carbon sources for bioproduction because of their sustainability. Many studies have been performed using biomass resources to produce sugars as carbon sources for cell factories. Expression of biomass hydrolyzing enzymes in cell factories is an important approach for constructing biomass-utilizing bioprocesses because external addition of these enzymes is expensive. In particular, yeasts have been extensively engineered to be cell factories that directly utilize biomass because of their manageable responses to many genetic engineering tools, such as gene expression, deletion and editing. Biomass utilizing bioprocesses have also been developed using these genetic engineering tools to construct metabolic pathways. However, sugar input and product output from these cells are critical factors for improving bioproduction along with biomass utilization and metabolic pathways. Transporters are key components for efficient input and output activities. In this review, we focus on transporter engineering in yeast to enhance bioproduction from biomass resources. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogomilov, M.; Matev, R.; Tsenov, R.

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable ofmore » making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.« less

Signal for a light singlet scalar at the LHC

NASA Astrophysics Data System (ADS)

Chang, We-Fu; Modak, Tanmoy; Ng, John N.

2018-03-01

In the general Higgs portal-like models, the extra neutral scalar, S , can mix with the Standard Model (SM) Higgs boson, H . We perform an exploratory study focusing on the direct search for such a light singlet S at the Large Hadron Collider (LHC). After careful study of the SM background, we find the process p p →t t ¯ S followed by S →b b ¯ can be used to investigate S with mass in the 20

Electron Transport at the Microbe–Mineral Interface: A Synthesis of Current Research Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richardson, David; Fredrickson, Jim K.; Zachara, John M.

2012-12-01

Many bacterial and archaeal species can couple growth to the respiratory reduction or oxidation of insoluble mineral oxides of transition metals. These solid substrates are abundant electron sinks and sources for life on Earth, but, since they are insoluble in water, they cannot enter the bacterial cells. So, to exploit these electron sinks and sources, specific respiratory electron-transfer mechanisms must overcome the physical limitations associated with electron transfer between a microbe and extracellular metal oxides. Recent microbiological, geochemical, biochemical, spectroscopic and structural work is beginning to shed light on the molecular mechanism and impacts of electron transfer at themicrobe–mineral interfacemore » from a nanometre to kilometre scale. The research field is attracting attention in applied quarters from those with interests in nanowires, microbial fuel cells, bioremediation and microbial cell factories.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, David; Snopok, Pavel; Alexahin, Yuri

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a Φ-δE rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both μ + and μ - transversely andmore » longitudinally. Finally, the status of the design is presented and variations are discussed.« less

Recent developments in fast pyrolysis of ligno-cellulosic materials.

PubMed

Kersten, Sascha; Garcia-Perez, Manuel

2013-06-01

Pyrolysis is a thermochemical process to convert ligno-cellulosic materials into bio-char and pyrolysis oil. This oil can be further upgraded or refined for electricity, transportation fuels and chemicals production. At the time of writing, several demonstration factories are considered worldwide aiming at maturing the technology. Research is focusing on understanding the underlying processes at all relevant scales, ranging from the chemistry of cell wall deconstruction to optimization of pyrolysis factories, in order to produce better quality oils for targeted uses. Among the several bio-oil applications that are currently investigated the production and fermentation of pyrolytic sugars explores the promising interface between thermochemistry and biotechnology. Copyright © 2013 Elsevier Ltd. All rights reserved.

POLLUTION REDUCTION AND RESOURCES SAVING THROUGH THE USE OF WASTE DERIVED GAS FOR FUELING A HIGH TEMPERATURE FUEL CELL

EPA Science Inventory

In the most recent years, the world energy demand rose quickly. Production of millions of new cars every year, development of electronic devices that use hundreds of watts each, replacing human labor with machines in the factories and many others, lead world oil production close...

High-Tech Betrayal: Working and Organizing on the Shop Floor.

ERIC Educational Resources Information Center

Devinatz, Victor G.

This book, which is based on a 7-month ethnographic study of working conditions and employment practices at a biomedical electronics factory, examines the impact that high tech has had on the relationship between management and workers in the manufacturing industry. The following are among the topics discussed in the book's 10 chapters: (1) the…

Oral History Project: Advanced ESL Class, Local 259 U.A.W. 1985-86.

ERIC Educational Resources Information Center

Colon, Maria, Comp.; And Others

A class project undertaken in an English-as-a-Second-Language class is described and presented. Students participating in the project were union employees in a Manhattan electronics factory, and most were native Spanish speakers. The project's objective was to produce an illustrated book and tapes to document work and union experience in the…

Developing Software For Monitoring And Diagnosis

NASA Technical Reports Server (NTRS)

Edwards, S. J.; Caglayan, A. K.

1993-01-01

Expert-system software shell produces executable code. Report discusses beginning phase of research directed toward development of artificial intelligence for real-time monitoring of, and diagnosis of faults in, complicated systems of equipment. Motivated by need for onboard monitoring and diagnosis of electronic sensing and controlling systems of advanced aircraft. Also applicable to such equipment systems as refineries, factories, and powerplants.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing new envelope technologies. This work is part of a multi-phase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysismore » of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall design with exterior continuous insulation (CI). Phase 3, completed in two stages, continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

Electronics manufacturing and assembly in Japan

NASA Technical Reports Server (NTRS)

Kukowski, John A.; Boulton, William R.

1995-01-01

In the consumer electronics industry, precision processing technology is the basis for enhancing product functions and for minimizing components and end products. Throughout Japan, manufacturing technology is seen as critical to the production and assembly of advanced products. While its population has increased less than 30 percent over twenty-five years, Japan's gross national product has increase thirtyfold; this growth has resulted in large part from rapid replacement of manual operations with innovative, high-speed, large-scale, continuously running, complex machines that process a growing number of miniaturized components. The JTEC panel found that introduction of next-generation electronics products in Japan goes hand-in-hand with introduction of new and improved production equipment. In the panel's judgment, Japan's advanced process technologies and equipment development and its highly automated factories are crucial elements of its domination of the consumer electronics marketplace - and Japan's expertise in manufacturing consumer electronics products gives it potentially unapproachable process expertise in all electronics markets.

A Response to Factory Closings: A Career Development Approach.

ERIC Educational Resources Information Center

Deady, John; White, Winifred Parker

This report describes the Career Planning Center, formerly the Institute for Vocational Readiness program, run by the Student Services Division of the Milwaukee Area Technical College. It briefly describes services offered by the center which are focused around a comprehensive diagnostic approach, offering students help in developing a positive…

Electron-cloud build-up in hadron machines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Furman, M.A.

2004-08-09

The first observations of electron-proton coupling effect for coasting beams and for long-bunch beams were made at the earliest proton storage rings at the Budker Institute of Nuclear Physics (BINP) in the mid-60's [1]. The effect was mainly a form of the two-stream instability. This phenomenon reappeared at the CERN ISR in the early 70's, where it was accompanied by an intense vacuum pressure rise. When the ISR was operated in bunched-beam mode while testing aluminum vacuum chambers, a resonant effect was observed in which the electron traversal time across the chamber was comparable to the bunch spacing [2]. Thismore » effect (''beam-induced multipacting''), being resonant in nature, is a dramatic manifestation of an electron cloud sharing the vacuum chamber with a positively-charged beam. An electron-cloud-induced instability has been observed since the mid-80's at the PSR (LANL) [3]; in this case, there is a strong transverse instability accompanied by fast beam losses when the beam current exceeds a certain threshold. The effect was observed for the first time for a positron beam in the early 90's at the Photon Factory (PF) at KEK, where the most prominent manifestation was a coupled-bunch instability that was absent when the machine was operated with an electron beam under otherwise identical conditions [4]. Since then, with the advent of ever more intense positron and hadron beams, and the development and deployment of specialized electron detectors [5-9], the effect has been observed directly or indirectly, and sometimes studied systematically, at most lepton and hadron machines when operated with sufficiently intense beams. The effect is expected in various forms and to various degrees in accelerators under design or construction. The electron-cloud effect (ECE) has been the subject of various meetings [10-15]. Two excellent reviews, covering the phenomenology, measurements, simulations and historical development, have been recently given by Frank Zimmermann [16,17]. In this article we focus on the mechanisms of electron-cloud buildup and dissipation for hadronic beams, particularly those with very long, intense, bunches.« less

The share of southeastern black counties in the southern rural renaissance: were they bypassed by factory job gains, 1959-77?

PubMed

Till, T E

1986-04-01

Some authors have suggested that a leading problem associated with US factory employment for blacks may be that the nonfarm jobs--specifically manufacturing--have tended to go to heavily white counties rather than to the mainly black counties of the Deep South. This study is limited to the 1959-1977 period, the time of the most vigorous nonmetropolitan employment growth. To test the hypothesis that factory jobs have bypassed heavily black counties, a 100% sample of nonmetropolitan counties was used from 13 Southern states for the 2 time periods, 1959-1969 and 1969-1977. Results show that the minority counties were not bypassed by Southern rural factory job growth either in the 1960s or the 1970s, but their gains were not as sizeable as those of more heavily white counties. Both the neoclassical economics of discrimination--with its individualistic "taste for discrimination"--and the stinging critique by Marshall in 1974 that such analysis ignores the important role of institutionalized racism--can "explain the empirical conclusions of this article." Traditional "smokestack-chasing" methods are by no means hopeless. While co-ops and community development corporation strategies can be combined with traditional methods, it is important that foundations, government agencies, anti-poverty programs, and black leadership also focus on projects to competitively attract jobs in the traditional fashion.

The role of psychosocial and physical work-related factors on the health-related quality of life of Iranian industrial workers.

PubMed

Mokarami, Hamidreza; Stallones, Lorann; Nazifi, Morteza; Taghavi, Sayed Mohammad

2016-10-17

The role of psychosocial and physical work factors in predicting health related quality of life (HRQOL) has not been investigated among Iranian industrial workers. The present study is designed to assess these relationships among Iranian workers from steel and cosmetic factories. A cross-sectional study was conducted among 280 workers from two factories. Psychosocial and physical work factors and HRQOL were measured by the Persian translations of the following questionnaires: Job Content Questionnaire (JCQ) and the World Health Organization Quality of Life-Brief (WHOQOL-Brief). An instrument was developed to assess socio-demographic, health, and other work-related factors. The data were analyzed using independent t-tests, Pearson product moment correlation and hierarchical multiple regression. Results revealed that the respondents generally had poor HRQOLs especially in the environmental domain. The steel factory workers who were exposed to higher levels of occupational risk factors suffered from poorer HRQOL compared to the cosmetic factory workers. The results of hierarchical regression for all participants revealed that social support, sleep quality, work schedule, smoking and exercise were significant predictors of all domains of HRQOL. To improve the worker's HRQOL, intervention programs should focus on promoting social support, sleep quality, exercise and smoking habits. Moreover, reducing hazardous work environments should be considered an important intervention to promote HRQOL.

The Status of Turkish Accelerator Center Test Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yavas, Oe.

2007-04-23

Recently, conceptual design of Turkic Accelerator Center (TAC) proposal was completed. Main goal of this proposal is a charm factory that consists of a linac-ring type electron-positron collider. In addition, synchrotron radiation from the positron ring and free electron laser from the electron linac are proposed. The project related with this proposal has been accepted by Turkish government. It is planned that the Technical Design Report of TAC will have been written in next three years. In this period, an infrared oscillator free electron laser (IR FEL) will be constructed as a test facility for TAC. 20 and 50 MeVmore » electron energies will be used to obtain infra red free electron laser. The main parameters of the electron linac, the optical cavities and the free electron laser were determined. The possible use of obtained laser beam in basic and applied research areas such as biotechnology, nanotechnology, semiconductors and photo chemistry were stated.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nasirabadi, P. Shojaee; Jabbari, M.; Hattel, J. H.

Electronic systems are sometimes exposed to harsh environmental conditions of temperature and humidity. Moisture transfer into electronic enclosures and condensation can cause several problems such as corrosion and alteration in thermal stresses. It is therefore essential to study the local climate inside the enclosures to be able to protect the electronic systems. In this work, moisture transfer into a typical electronic enclosure is numerically studied using CFD. In order to reduce the CPU-time and make a way for subsequent factorial design analysis, a simplifying modification is applied in which the real 3D geometry is approximated by a 2D axial symmetrymore » one. The results for 2D and 3D models were compared in order to calibrate the 2D representation. Furthermore, simulation results were compared with experimental data and good agreement was found.« less

Characterization of leaf-level particulate matter for an industrial city using electron microscopy and X-ray microanalysis.

PubMed

Sgrigna, G; Baldacchini, C; Esposito, R; Calandrelli, R; Tiwary, A; Calfapietra, C

2016-04-01

This study reports application of monitoring and characterization protocol for particulate matter (PM) deposited on tree leaves, using Quercus ilex as a case study species. The study area is located in the industrial city of Terni in central Italy, with high PM concentrations. Four trees were selected as representative of distinct pollution environments based on their proximity to a steel factory and a street. Wash off from leaves onto cellulose filters were characterized using scanning electron microscopy and energy dispersive X-ray spectroscopy, inferring the associations between particle sizes, chemical composition, and sampling location. Modeling of particle size distributions showed a tri-modal fingerprint, with the three modes centered at 0.6 (factory related), 1.2 (urban background), and 2.6μm (traffic related). Chemical detection identified 23 elements abundant in the PM samples. Principal component analysis recognized iron and copper as source-specific PM markers, attributed mainly to industrial and heavy traffic pollution respectively. Upscaling these results on leaf area basis provided a useful indicator for strategic evaluation of harmful PM pollutants using tree leaves. Copyright © 2016. Published by Elsevier B.V.

Optimization of LDL targeted nanostructured lipid carriers of 5-FU by a full factorial design.

PubMed

Andalib, Sare; Varshosaz, Jaleh; Hassanzadeh, Farshid; Sadeghi, Hojjat

2012-01-01

Nanostructured lipid carriers (NLC) are a mixture of solid and liquid lipids or oils as colloidal carrier systems that lead to an imperfect matrix structure with high ability for loading water soluble drugs. The aim of this study was to find the best proportion of liquid and solid lipids of different types for optimization of the production of LDL targeted NLCs used in carrying 5-Fu by the emulsification-solvent evaporation method. The influence of the lipid type, cholesterol or cholesteryl stearate for targeting LDL receptors, oil type (oleic acid or octanol), lipid and oil% on particle size, surface charge, drug loading efficiency, and drug released percent from the NLCs were studied by a full factorial design. The NLCs prepared by 54.5% cholesterol and 25% of oleic acid, showed optimum results with particle size of 105.8 nm, relatively high zeta potential of -25 mV, drug loading efficiency of 38% and release efficiency of about 40%. Scanning electron microscopy of nanoparticles confirmed the results of dynamic light scattering method used in measuring the particle size of NLCs. The optimization method by a full factorial statistical design is a useful optimization method for production of nanostructured lipid carriers.

[The Maugeri Stress Index: a questionnaire to assess work-related psychological stress].

PubMed

Giorgi, Ines; Baiardi, Paola; Tringali, Salvatore; Candura, Stefano Massimo; Gardinali, Francesco; Grignani, Elena; Bertolotti, Giorgio; Imbriani, Marcello

2011-01-01

The European directives concerning the evaluation of work-related stress were absorbed into Italian law by means of Legislative Decree No. 81 of 9 April 2008. To develop a new questionnaire to assess the impact of work-related psychological distress and to validate it by testing its factorial structure, its content, its construct and discriminant validity. After critically reviewing the literature, we generated an initial item set to identify the items to be used in a preliminary version of the questionnaire, and then used a focus group to test the comprehensibility of the items. The questionnaire was administered to 329 subjects working in state and private organisation and a small sample of 29 subjects complaining of vexation at work. The Maugeri Stress Index (MSI) is reliable (Cronbach alpha: 0.93). Factorial analysis indicated five factors: Well-being, Adaptation, Support, Irritability and Avoidance. The total and subscale scores were significantly different when comparing subjects with and without vexation at work. The MSI has a multi-factorial structure, good internal reliability and sufficient discriminant power.

Novel Solid Lipid Nanocarrier Of Glibenclamide: A Factorial Design Approach With Response Surface Methodology.

PubMed

Pandey, Sonia; Patel, Payal; Gupta, Arti

2018-05-21

In the present investigation a factorial design approach attempt was applied to develop the solid lipid nanoparticles (SLN) of Glibenclamide (GLB) a poorly water-soluble drug (BCS -II) used in the treatment of type 2 diabetes. Prime objectives of this experiment are to optimize the SLN formulation of Glibenclamide and improve the therapeutic effectiveness of the developed formulation. Glibenclamide loaded SLNs (GLB-SLN) were fabricated by High speed homogenization technique. A 32-factorial design approach has been employed to assess the influence of two independent variables, namely amount of Poloxamer 188 and Glyceryl Monostearate on entrapment efficiency (% EE) (Y1), Particle Size (nm) (Y2), % drug release at 8hr Q8 (Y3) and 24 hr Q24 (Y4) of prepared SLNs. Differential scanning calorimetry analysis revealed the compatibility of the drug into lipid matrix with surfactant, while Transmission electron and Scanning electron microscopy studies indicated the size and shape of SLN. The entrapment efficiency, particle size, Q8 and Q24 of the optimized SLNs were 88.93%, 125 nm, 31.12±0.951% and 86.07±1.291% respectively. Optimized GLB-SLN formula was derived from an overlay plot. Three dimensional response surface plots and regression equations confirmed the corresponding influence of selected independent variables on measured responses. In vivo testing of the GLB-SLN in diabetic albino rats demonstrated significant antidiabetic effect of GLB-SLN. The hypoglycemic effect obtained by GLB-SLN remained significantly higher than that given by drug alone and marketed formulation, further confirming the higher therapeutic effectiveness of the GLB-SLN formulation. Our findings suggested the feasibility of investigated system for oral administration of Glibenclamide. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Insulin-like growth factor-I, physical activity, and control of cellular anabolism.

PubMed

Nindl, Bradley C

2010-01-01

The underlying mechanisms responsible for mediating the beneficial outcomes of exercise undoubtedly are many, but the insulin-like growth factor-I (IGF-I) system is emerging as an important and central hormonal axis that plays a significant role concerning cellular anabolism. This introductory article summarizes the intent and the content for papers presented as part of a 2008 American College of Sports Medicine national symposium entitled "Insulin-like Growth Factor-I, Physical Activity, and Control of Cellular Anabolism." The individual authors and their papers are as follows: Jan Frystyk authoring "The relationship between exercise and the growth hormone/insulin-like growth factor-I axis," Greg Adams authoring "IGF-I signaling in skeletal muscle and the potential for cytokine interactions," and Brad Nindl authoring "Insulin-like growth factor-I as a biomarker of health, fitness, and training status." These papers focus on 1) different assay methodologies for IGF-I within the paradigm of exercise studies, 2) research demonstrating that intracellular signaling components associated with several proinflammatory cytokines have the potential to interact with anabolic signaling processes in skeletal muscle, and 3) an overview of IGF-I as a biomarker related to exercise training, muscle and bone remodeling, body composition, cognition, and cancer. When summed in total, the contribution that these papers will make will undoubtedly involve bringing attention to the vast regulatory complexity of the IGF-I system and will hopefully convince the reader that the IGF-I system warrants further detailed scientific inquiry to resolve many unanswered questions and paradoxical experimental findings. The IGF-I system remains one of the most intriguing and captivating marvels of human physiology that seems central in mediating numerous adaptations from physical activity.

Novel Starch-PVA Polymer for Microparticle Preparation and Optimization Using Factorial Design Study

PubMed Central

Chattopadhyay, Helen; De, Amit Kumar; Datta, Sriparna

2015-01-01

The aim of our present work was to optimize the ratio of a very novel polymer, starch-polyvinyl alcohol (PVA), for controlled delivery of Ornidazole. Polymer-coated drug microparticles were prepared by emulsion method. Microscopic study, scanning electron microscopic study, and atomic force microscopic study revealed that the microparticles were within 10 micrometers of size with smooth spherical shape. The Fourier transform infrared spectroscopy showed absence of drug polymer interaction. A statistical 32 full factorial design was used to study the effect of different concentration of starch and PVA on the drug release profile. The three-dimensional plots gave us an idea about the contribution of each factor on the release kinetics. Hence this novel polymer of starch and polyvinyl alcohol can be utilized for control release of the drug from a targeted delivery device. PMID:27347511

Differential Changes with Extended Practice.

DTIC Science & Technology

1983-06-01

This project was designed to answer a series of questions involving extended practice on motor skills tasks. The tasks employed were video games , and principal interest was focused on whether: (1) performance late in practice involves fewer underlying factors than early in practice; (2) video games coverge or diverge differentially upon one another; and (3) factorial content of

Application of the high throughput Attagene Factorial TM platform to environmental monitoring: Characterizing complex, environmental mixtures

EPA Science Inventory

Bioassays can be employed to evaluate the integrated effects of complex mixtures of both known and unidentified contaminants present in environmental samples. However, such methods have typically focused on one or a few pathways despite the fact that the chemicals in a mixture ma...

Through Strength and Struggle: Boston's Asian American Student/Community/Labor Solidarity.

ERIC Educational Resources Information Center

Kiang, Peter N.; Ng, Man Chak

1989-01-01

Linkage between students, the Chinatown community in Boston (Massachusetts), and labor solidarity are examined. The focus is on students as supporters of Chinese immigrant workers displaced by the closing of a large garment factory. Aided by the students and the Chinese Progressive Association, the workers organized themselves and won their…

Validity Issues in Assessing Dispositions: The Confirmatory Factor Analysis of a Teacher Dispositions Form

ERIC Educational Resources Information Center

Niu, Chunling; Everson, Kimberlee; Dietrich, Sylvia; Zippay, Cassie

2017-01-01

Critics against the inclusion of dispositions as part of the teacher education accreditation focus on the dearth of empirical literature on reliably and validly accessing dispositions (Borko, Liston, & Whitcomb, 2007). In this study, a confirmatory factor analysis (CFA) was performed to test the factorial validity of a teacher dispositions…

JPRS Report, Science & Technology. Europe: Economic Competitiveness

DTIC Science & Technology

1992-12-11

German TV Factory Improves Local Suppliers’ Prospects [Bonn DIE WELT, 16 Oct 92] 57 Sony To Introduce Mobile Phone for UK Consumer [Chichester...laying claim to the title of technopolis. But it has all the makings of one: a science entertain - ment park, a concentration of audiovisual...data processing and telecommu- nication equipment, entertainment electronics), they are also used indirectly—through their use in measuring and

An Emerging Perspective on Policies for American Work and Education for the Year 2000: Choices We Face.

ERIC Educational Resources Information Center

Wirth, Arthur G.

As the United States and the rest of the world moves into an electronic-driven postindustrial revolution that is replacing the factory industrialism of the beginning of the century, new realities call for change in the workplace and the education system. Declining wages, increased unemployment, and a lowered standard of living have occurred as the…

Actual curriculum development practices instrument: Testing for factorial validity

NASA Astrophysics Data System (ADS)

Foi, Liew Yon; Bakar, Kamariah Abu; Hamzah, Mohd Sahandri Gani; Alwi, Nor Hayati

2014-09-01

The Actual Curriculum Development Practices Instrument (ACDP-I) was developed and the factorial validity of the ACDP-I was tested (n = 107) using exploratory factor analysis procedures in the earlier work of [1]. Despite the ACDP-I appears to be content and construct valid instrument with very high internal reliability qualities for using in Malaysia, the accumulated evidences are still needed to provide a sound scientific basis for the proposed score interpretations. Therefore, the present study addresses this concern by utilising the confirmatory factor analysis to further confirm the theoretical structure of the variable Actual Curriculum Development Practices (ACDP) and enrich the psychometrical properties of ACDP-I. Results of this study have practical implication to both researchers and educators whose concerns focus on teachers' classroom practices and the instrument development and validation process.

Development of a low cost integrated 15 kW A.C. solar tracking sub-array for grid connected PV power system applications

NASA Astrophysics Data System (ADS)

Stern, M.; West, R.; Fourer, G.; Whalen, W.; Van Loo, M.; Duran, G.

1997-02-01

Utility Power Group has achieved a significant reduction in the installed cost of grid-connected PV systems. The two part technical approach focused on 1) The utilization of a large area factory assembled PV panel, and 2) The integration and packaging of all sub-array power conversion and control functions within a single factory produced enclosure. Eight engineering prototype 15kW ac single axis solar tracking sub-arrays were designed, fabricated, and installed at the Sacramento Municipal Utility District's Hedge Substation site in 1996 and are being evaluated for performance and reliability. A number of design enhancements will be implemented in 1997 and demonstrated by the field deployment and operation of over twenty advanced sub-array PV power systems.

Self-Concepts in Reading, Writing, Listening, and Speaking: A Multidimensional and Hierarchical Structure and Its Generalizability across Native and Foreign Languages

ERIC Educational Resources Information Center

Arens, A. Katrin; Jansen, Malte

2016-01-01

Academic self-concept has been conceptualized as a multidimensional and hierarchical construct. Previous research has mostly focused on its multidimensionality, distinguishing between verbal and mathematical self-concept domains, and only a few studies have examined the factorial structure within specific self-concept domains. The present study…

[Background and characteristics of migration to urban areas in Java].

PubMed

Kawamoto, I

1985-06-01

A review of urbanization trends in Java, Indonesia, is presented, with the focus on the background and characteristics of migrants to urban areas. Comparisons are made between the characteristics of laborers in the informal sector (housemaids) and those of factory workers, and between migrants from rural areas and those from other urban areas. (summary in ENG)

Presentation Skills. P.R.I.D.E. People Retraining for Industry Excellence.

ERIC Educational Resources Information Center

Burt, Lorna

This guide, part of a series of workplace-developed materials for retraining factory workers, provides teaching materials for a workplace communication and public speaking course. The course is a review of basic speech concepts focused on helping participants to be comfortable in class discussions and speaking in front of an audience. Topics…

Building "Cowshed Cultures": A Cultural Perspective on the Promotion of Stockmanship and Animal Welfare on Dairy Farms

ERIC Educational Resources Information Center

Burton, Rob J. F.; Peoples, Sue; Cooper, Mark H.

2012-01-01

Improving animal welfare is an important part of the development of the agricultural industry, particularly at a time when intensification and the encroachment of factory-style production systems is making the maintenance of human-animal relations increasingly difficult. Animal science deals with the issue of improving stockmanship by focusing on…

Portuguese Child Labour: Manufacturing for Change or Continuing Exploitation in the Textiles Industry?

ERIC Educational Resources Information Center

Eaton, Martin; da Silva, Carlos Pereira

1998-01-01

Provides an overview of the role of Portuguese child laborers, focusing on the textile, clothing, and footwear industries. Argues that in the long term, positive outcomes will be based upon improved education; an alteration in the views of the factory owners, parents, and their children; and greater knowledge of innovative working practices among…

Bale to Bolt: Activity Guide.

ERIC Educational Resources Information Center

Massachusetts Univ., Lowell. Tsongas Industrial History Center.

This field trip program consists of a 90-minute interpretive tour and a 90-minute hands-on workshop in which students learn about the process of making cloth both by hand and in a factory. The program focuses on the changing nature of work and the roles of workers. The tour and workshop complement one another by exploring different aspects of the…

Education and the Transformation of Markets and Technology in the Textile Industry. Technical Paper No. 2.

ERIC Educational Resources Information Center

Bailey, Thomas

This report on the textile industry focuses on the training and education of production-level textile workers--from unskilled factory hands to first-level supervisors. It is part of a larger study of the educational implications of broad economic changes, particularly the spread of microelectronic technologies, growing national and international…

Evaluation of a low-cost adsorbent for removal of toxic metal ions from wastewater of an electroplating factory.

PubMed

Sousa, Francisco W; Sousa, Marcelo James; Oliveira, Isadora R N; Oliveira, André G; Cavalcante, Rivelino M; Fechine, Pierre B A; Neto, Vicente O S; de Keukeleire, Denis; Nascimento, Ronaldo F

2009-08-01

In this study, sugar cane residue or bagasse was used for removal of toxic metal ions from wastewater of an electroplating factory located in northeast Brazil. Prior acid treatment increased the adsorption efficacies in batch wise experiments. The microstructure of the material before and after the treatment was investigated by X-ray diffraction, infrared spectroscopy and scanning electron microscopy. Column operations showed that removals of Cu(2+), Ni(2+) and Zn(2+) from wastewater (in the absence of cyanide) were 95.5%, 96.3.0%, and 97.1%, respectively. Regeneration of the adsorbent obtained in acid indicated that the efficiencies decreased only after the fourth cycle of re-use. Acid-treated sugar cane bagasse can be considered a viable alternative to common methods to remove toxic metal ions from aqueous effluents of electroplating industries.

Estimating Power Outage Cost based on a Survey for Industrial Customers

NASA Astrophysics Data System (ADS)

Yoshida, Yoshikuni; Matsuhashi, Ryuji

A survey was conducted on power outage cost for industrial customers. 5139 factories, which are designated energy management factories in Japan, answered their power consumption and the loss of production value due to the power outage in an hour in summer weekday. The median of unit cost of power outage of whole sectors is estimated as 672 yen/kWh. The sector of services for amusement and hobbies and the sector of manufacture of information and communication electronics equipment relatively have higher unit cost of power outage. Direct damage cost from power outage in whole sectors reaches 77 billion yen. Then utilizing input-output analysis, we estimated indirect damage cost that is caused by the repercussion of production halt. Indirect damage cost in whole sectors reaches 91 billion yen. The sector of wholesale and retail trade has the largest direct damage cost. The sector of manufacture of transportation equipment has the largest indirect damage cost.

Literacies in a Changing Workplace: A Look at the Uses of Literacy in a Multi-ethnic, High-tech Electronics Factory.

ERIC Educational Resources Information Center

Katz, Mira-Lisa; Jury, Mark

Many studies and much "common knowledge" in the United States today decry the quality of the work force and the "basic literacy needs" of today's and tomorrow's workers. Widespread concern exists that U.S. workers are ill-equipped to compete in the global marketplace and that schools and vocational programs are failing to keep pace with changing…

Development and Validation of a Low Cost, Flexible, Open Source Robot for Use as a Teaching and Research Tool across the Educational Spectrum

ERIC Educational Resources Information Center

Howell, Abraham L.

2012-01-01

In the high tech factories of today robots can be used to perform various tasks that span a wide spectrum that encompasses the act of performing high-speed, automated assembly of cell phones, laptops and other electronic devices to the compounding, filling, packaging and distribution of life-saving pharmaceuticals. As robot usage continues to…

Sparse and incomplete factorial matrices to screen membrane protein 2D crystallization

PubMed Central

Lasala, R.; Coudray, N.; Abdine, A.; Zhang, Z.; Lopez-Redondo, M.; Kirshenbaum, R.; Alexopoulos, J.; Zolnai, Z.; Stokes, D.L.; Ubarretxena-Belandia, I.

2014-01-01

Electron crystallography is well suited for studying the structure of membrane proteins in their native lipid bilayer environment. This technique relies on electron cryomicroscopy of two-dimensional (2D) crystals, grown generally by reconstitution of purified membrane proteins into proteoliposomes under conditions favoring the formation of well-ordered lattices. Growing these crystals presents one of the major hurdles in the application of this technique. To identify conditions favoring crystallization a wide range of factors that can lead to a vast matrix of possible reagent combinations must be screened. However, in 2D crystallization these factors have traditionally been surveyed in a relatively limited fashion. To address this problem we carried out a detailed analysis of published 2D crystallization conditions for 12 β-barrel and 138 α-helical membrane proteins. From this analysis we identified the most successful conditions and applied them in the design of new sparse and incomplete factorial matrices to screen membrane protein 2D crystallization. Using these matrices we have run 19 crystallization screens for 16 different membrane proteins totaling over 1,300 individual crystallization conditions. Six membrane proteins have yielded diffracting 2D crystals suitable for structure determination, indicating that these new matrices show promise to accelerate the success rate of membrane protein 2D crystallization. PMID:25478971

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amemiya, Kenta; Toyoshima, Akio; Kikuchi, Takashi

The design and commissioning of a new soft X-ray beamline, BL-16A, at the Photon Factory is presented. The beamline consists of a pre-focusing mirror, an entrance slit, a variable-included-angle varied-line-spacing plane grating monochromator, and a post-focusing system as usual, and provides circularly and linearly polarized soft X rays in the energy range 200-1500 eV with an APPLE-II type undulator. The commissioning procedure for the beamline optics is described in detail, especially the check of the focal position for the zero-th order and diffracted X rays.

A survey of occupational health hazards among 7,610 female workers in China's electronics industry.

PubMed

Yu, Wenlan; Lao, Xiang Qian; Pang, Shulan; Zhou, Jianjiao; Zhou, Anshou; Zou, Jianfang; Mei, Liangying; Yu, Ignatius Tak-sun

2013-01-01

To investigate the occupational hazards among Chinese female workers in the electronics industry, the authors systematically sampled a total of 8,300 female workers at random across 4 provinces in a variety of electronics factories. A detailed questionnaire was used to collect information on occupational hazards and the occurrence of occupation-related diseases. The results show that 4,283 female workers (51.9%) were exposed to 1 or more occupational hazards. The most common chemical hazard was organic solvent, and the second most common was heavy metals. The ergonomic hazards included repetitive movements, poor standing posture, and the lifting of heavy goods. More than 60% of the female workers self-reported occupation-related diseases. These results showed that occupational health hazards were common in the electronics industry in China and that they caused serious occupation-related health problems for the female workers therein.

Screening Experiments and the Use of Fractional Factorial Designs in Behavioral Intervention Research

PubMed Central

Nair, Vijay; Strecher, Victor; Fagerlin, Angela; Ubel, Peter; Resnicow, Kenneth; Murphy, Susan; Little, Roderick; Chakraborty, Bibhas; Zhang, Aijun

2008-01-01

Health behavior intervention studies have focused primarily on comparing new programs and existing programs via randomized controlled trials. However, numbers of possible components (factors) are increasing dramatically as a result of developments in science and technology (e.g., Web-based surveys). These changes dictate the need for alternative methods that can screen and quickly identify a large set of potentially important treatment components. We have developed and implemented a multiphase experimentation strategy for accomplishing this goal. We describe the screening phase of this strategy and the use of fractional factorial designs (FFDs) in studying several components economically. We then use 2 ongoing behavioral intervention projects to illustrate the usefulness of FFDs. FFDs should be supplemented with follow-up experiments in the refining phase so any critical assumptions about interactions can be verified. PMID:18556602

[Shoes stitched, workers unstitched: a study on working and health conditions among women factory workers in the footwear industry in Franca, São Paulo State, Brazil].

PubMed

Prazeres, Taísa Junqueira; Navarro, Vera Lucia

2011-10-01

This study aimed to analyze associations between working conditions and health problems reported by women workers assigned to mechanical stitching in the footwear industry in Franca, São Paulo State, Brazil. The qualitative study's theory and methodology were based on historical and dialectical materialism and combined sociological and ethnographic research techniques. Data were collected with taped interviews, focusing on the workers' life and work stories, systematic observation of the work process, consultation of historical documents, and imagistic production. Analysis of the data revealed the effects of work in mechanical stitching on the health of women workers employed in the factory and at home, who experience precarious labor conditions involving workday intensification and extension, preset production targets, job insecurity, and unhealthy workplaces.

Do Animals Have Rights? Teacher's Packet (for 4th, 5th, & 6th Grades).

ERIC Educational Resources Information Center

Sammut-Tovar, Dorothy; Sturla, Kim

Activities in this unit are designed to sensitize students in grades 4-6 to the needs of animals and to the injustices many species suffer. The lessons focus on inhumane acts such as the use of steel-jaw traps, dogfighting, hunting, keeping exotic pets in captivity, using animals in entertainment, habitat destruction, factory farming, and animal…

The Effects of Group Leader Learning Style on Student Knowledge Gain in a Leadership Camp Setting: A Repeated-Measures Experiment

ERIC Educational Resources Information Center

Brown, Nicholas R.; Terry, Robert, Jr.

2013-01-01

Many state FFA associations conduct summer camps focusing on leadership and personal development for FFA members. Interestingly, little research has been conducted on the impact or outcomes of these common activities. The purpose of this split-plot factorial repeated-measures experiment was to assess the level of campers' learning of the…

The Citizen Factory: Schooling and Cultural Production in Bolivia. SUNY Series: Power, Social Identity, and Education.

ERIC Educational Resources Information Center

Luykx, Aurolyn

This book attempts to engage theoretical questions of ethnicity, ideology, and identity as they are lived out by Aymara students in a small teachers' college in rural Bolivia. A year of fieldwork at the Escuela Normal Rural "Kollasuyo" focused on the experiences of Aymara students during their intensive training to become rural teachers,…

Expansion of Vocational Education in Neoliberal China: Hope and Despair among Rural Youth

ERIC Educational Resources Information Center

Koo, Anita

2016-01-01

The rise of China as the world factory in the last few decades has been accompanied by a rapid expansion in vocational education. A growing number of youth from rural backgrounds now have the chance to receive post-compulsory education in vocational training schools. Using human capital theory as an analytical focus, this study examines their…

Factorials of real negative and imaginary numbers - A new perspective.

PubMed

Thukral, Ashwani K

2014-01-01

Presently, factorials of real negative numbers and imaginary numbers, except for zero and negative integers are interpolated using the Euler's gamma function. In the present paper, the concept of factorials has been generalised as applicable to real and imaginary numbers, and multifactorials. New functions based on Euler's factorial function have been proposed for the factorials of real negative and imaginary numbers. As per the present concept, the factorials of real negative numbers, are complex numbers. The factorials of real negative integers have their imaginary part equal to zero, thus are real numbers. Similarly, the factorials of imaginary numbers are complex numbers. The moduli of the complex factorials of real negative numbers, and imaginary numbers are equal to their respective real positive number factorials. Fractional factorials and multifactorials have been defined in a new perspective. The proposed concept has also been extended to Euler's gamma function for real negative numbers and imaginary numbers, and beta function.

Translations on North Korea No. 622

DTIC Science & Technology

1978-10-13

Pyongyang Power Station 5 July Electric Factory Hamhung Machine Tool Factory Kosan Plastic Pipe Factory Sog’wangea Plastic Pipe Factory 8...August Factory Double Chollima Hamhung Disabled Veterans’ Plastic Goods Factory Mangyongdae Machine Tool Factory Kangso Coal Mine Tongdaewon Garment...21 Jul 78 p 4) innovating in machine tool production (NC 21 Jul 78 p 2) in 40 days of the 蔴 days of combat" raised coal production 10 percent

Particulate matters collected from ceramic factories in Lampang Province affecting rat lungs.

PubMed

Fongmoon, Duriya; Pongnikorn, Surathat; Chaisena, Aphiruk; Iamsaard, Sitthichai

2014-01-01

Lung cancer ranks as the fifth largest of all cancer cases in Thailand. However, it is the first leading cancer in the northern part of Thailand (data from 2003-2007). There are several predisposing causes that lead to lung cancer and one important inducement is particulate matters (PMs). Lampang Province in Thailand is famous for the ceramic industry, where there are over 200 ceramic industrial factories. PMs are produced during the ceramic manufacturing process and spread throughout all of the working areas. It is very possible that workers could directly inhale PM-contaminated air during working hours. This study focuses on the toxic effects of PMs collected from ceramic factories on genes and lungs of rats. PMs collected from six ceramic factories in Lampang Province were extracted using dimethyl sulfoxide (DMSO). The inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) were used to analyze the chemical elements at lower and higher concentrations, respectively. Then, the toxicity of PMs on the genes was examined by the Ames test, and subsequently, the effect of PMs on DNA was examined by quantifying the amount of 8-hydroxy-2'-deoxyguanosine (8-OHdG). Finally, the toxicity of the PMs on rat's lungs was examined by histology. As chemical elements of lower concentrations, cadmium, chromium, nickel, copper, and lead were detected by ICP-MS. As chemical elements of higher concentrations, manganese, magnesium, zinc, iron, potassium, calcium, and sodium were detected by ICP-OES. No mutagenicity in Salmonella typhimurium was found in the PM extracts from all six factories by utilizing the Ames test. In the histological study, the reduction in spaces of alveolar ducts and sacs, and terminal bronchioles, the thickening of interstitial connective tissues were noted by PM extracts in high amounts (100 and 350 µg). Female rats were more sensitive to PM extracts than males in terms of their pulmonary damages. PMs were not mutagenic to S. typhimurium but can damage the lung tissue of rats.

TEAM (Technologies Enabling Agile Manufacturing) shop floor control requirements guide: Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-03-28

TEAM will create a shop floor control system (SFC) to link the pre-production planning to shop floor execution. SFC must meet the requirements of a multi-facility corporation, where control must be maintained between co-located facilities down to individual workstations within each facility. SFC must also meet the requirements of a small corporation, where there may only be one small facility. A hierarchical architecture is required to meet these diverse needs. The hierarchy contains the following levels: Enterprise, Factory, Cell, Station, and Equipment. SFC is focused on the top three levels. Each level of the hierarchy is divided into three basicmore » functions: Scheduler, Dispatcher, and Monitor. The requirements of each function depend on the hierarchical level in which it is to be used. For example, the scheduler at the Enterprise level must allocate production to individual factories and assign due-dates; the scheduler at the Cell level must provide detailed start and stop times of individual operations. Finally the system shall have the following features: distributed and open-architecture. Open architecture software is required in order that the appropriate technology be used at each level of the SFC hierarchy, and even at different instances within the same hierarchical level (for example, Factory A uses discrete-event simulation scheduling software, and Factory B uses an optimization-based scheduler). A distributed implementation is required to reduce the computational burden of the overall system, and allow for localized control. A distributed, open-architecture implementation will also require standards for communication between hierarchical levels.« less

Industrial hygiene, occupational safety and respiratory symptoms in the Pakistani cotton industry

PubMed Central

Khan, Abdul Wali; Moshammer, Hanns Michael; Kundi, Michael

2015-01-01

Objectives In the cotton industry of Pakistan, 15 million people are employed and exposed to cotton dust, toxic chemicals, noise and physical hazards. The aim of this study was to determine the prevalence of health symptoms, particularly respiratory symptoms, and to measure cotton dust and endotoxin levels in different textile factories of Faisalabad, Pakistan. Methods A cross-sectional investigation was performed in a representative sample of 47 cotton factories in the Faisalabad region in Punjab, Pakistan. Respiratory symptoms of 800 workers were documented by questionnaire. Occupational safety in the factories was assessed by a trained expert following a checklist, and dust and endotoxin levels in different work areas were measured. Results Prevalence of respiratory disease symptoms (fever, shortness of breath, chest tightness and cough) was generally high and highest in the weaving section of the cotton industry (20–40% depending on symptoms). This section also displayed the poorest occupational safety ratings and the highest levels of inhalable cotton dust (mean±SD 4.6±2.5 vs 0.95±0.65 mg/m3 in compact units). In contrast, endotoxin levels were highest in the spinning section (median 1521 EU/m3), where high humidity is maintained. Conclusions There are still poor working conditions in the cotton industry in Pakistan where workers are exposed to different occupational hazards. More health symptoms were reported from small weaving factories (power looms). There is a dire need for improvements in occupational health and safety in this industrial sector with particular focus on power looms. PMID:25838509

Electron radiography

DOEpatents

Merrill, Frank E.; Morris, Christopher

2005-05-17

A system capable of performing radiography using a beam of electrons. Diffuser means receive a beam of electrons and diffuse the electrons before they enter first matching quadrupoles where the diffused electrons are focused prior to the diffused electrons entering an object. First imaging quadrupoles receive the focused diffused electrons after the focused diffused electrons have been scattered by the object for focusing the scattered electrons. Collimator means receive the scattered electrons and remove scattered electrons that have scattered to large angles. Second imaging quadrupoles receive the collimated scattered electrons and refocus the collimated scattered electrons and map the focused collimated scattered electrons to transverse locations on an image plane representative of the electrons' positions in the object.

Smoking Is So Ew!: College Smokers' Reactions to Health- Versus Social-Focused Antismoking Threat Messages.

PubMed

Wong, Norman C H; Nisbett, Gwendelyn S; Harvell, Lindsey A

2017-04-01

This study utilizes Terror Management Theory (TMT) to examine differences between eliciting social death and physical death anxiety related to smoking, smoking attitudes, and quitting intent among college students. Moreover, an important TMT variable-self-esteem-was used as a moderator. A 2 × 3 between-subjects factorial design crossed smoking-based self-esteem (low, high) with mortality salience manipulation (health-focused, social-focused, control). Results suggest while both making health-focused salient and making social-focused mortality salient were effective at getting smokers to quit, there was less effect for health-focused mortality salience on those whose self-esteem is strongly tied to smoking. Effect of social-focused mortality salience was more pronounced among participants who highly linked self-esteem with smoking. For smokers with low smoking-based self-esteem, both health-focused and social-focused mortality salience were effective at motivating attitude change toward smoking and quitting intentions. Implications for smoking cessation ad design and TMT are discussed.

Development of FARICH detector for particle identification system at accelerators

NASA Astrophysics Data System (ADS)

Finogeev, D. A.; Kurepin, A. B.; Razin, V. I.; Reshetin, A. I.; Usenko, E. A.; Barnyakov, A. Yu.; Barnyakov, M. Yu.; Bobrovnikov, V. S.; Buzykaev, A. R.; Kasyanenko, P. V.; Kononov, S. A.; Kravchenko, E. A.; Kuyanov, I. A.; Onuchin, A. P.; Ovtin, I. V.; Podgornov, N. A.; Talyshev, A. A.; Danilyuk, A. F.

2018-01-01

Aerogel has been successfully used as a radiator in Cherenkov detectors. In 2004, a multilayer aerogel providing Cherenkov ring focusing was proposed and produced. FARICH (Focusing Aerogel Rich Imaging CHerenkov) detectors such as ARICH for Belle-II (KEK, Japan), Forward RICH for PANDA detector (FAIR, Germany), and FARICH for the Super Charm-Tau factory project (BINP, Novosibirsk) have been developed based on this aerogel. Prototypes of FARICH detector based on MRS APD and Philips DPC photosensors were developed and tested in the framework of this project. An angular resolution for Cherenkov rings of 3.6 mrad was achieved.

Efficiency Analysis and Productivity of Socioeconomic Activities of the Municipal Museums on the Basis of Factorial Communications

ERIC Educational Resources Information Center

Nuykina, Elena Y.; Polyanskova, Natalia V.; Snegireva, Marija V.

2016-01-01

The urgency of the problem under investigation due to the fact that in most municipal districts with a deficit of financial and other resources are troubled almost all areas of museum activity. The article focused on the study of factor socioeconomic relations of municipal museums. The leading method to the study of this problem is the correlation…

Automated Scheduling Via Artificial Intelligence

NASA Technical Reports Server (NTRS)

Biefeld, Eric W.; Cooper, Lynne P.

1991-01-01

Artificial-intelligence software that automates scheduling developed in Operations Mission Planner (OMP) research project. Software used in both generation of new schedules and modification of existing schedules in view of changes in tasks and/or available resources. Approach based on iterative refinement. Although project focused upon scheduling of operations of scientific instruments and other equipment aboard spacecraft, also applicable to such terrestrial problems as scheduling production in factory.

A totally active scintillator calorimeter for the Muon Ionization Cooling Experiment (MICE). Design and construction

NASA Astrophysics Data System (ADS)

Asfandiyarov, Ruslan

2013-12-01

The Electron-Muon Ranger (EMR) is a totally active scintillator detector to be installed in the muon beam of the Muon Ionization Cooling Experiment (MICE) [1] - the main R&D project for the future neutrino factory. It is aimed at measuring the properties of the low energy beam composed of muons, electrons and pions, performing the identification particle by particle. The EMR is made of 48 stacked layers alternately measuring the X- and the Y-coordinate. Each layer consists of 59 triangular scintillator bars. It is shown that the granularity of the detector permits to identify tracks and to measure particle ranges and shower shapes. The read-out is based on FPGA custom made electronics and commercially available modules. Currently it is being built at the University of Geneva.

Turnip mosaic virus Moves Systemically through Both Phloem and Xylem as Membrane-Associated Complexes1

PubMed Central

Zheng, Huanquan

2015-01-01

Plant viruses move systemically in plants through the phloem. They move as virions or as ribonucleic protein complexes, although it is not clear what these complexes are made of. The approximately 10-kb RNA genome of Turnip mosaic virus (TuMV) encodes a membrane protein, known as 6K2, that induces endomembrane rearrangements for the formation of viral replication factories. These factories take the form of vesicles that contain viral RNA (vRNA) and viral replication proteins. In this study, we report the presence of 6K2-tagged vesicles containing vRNA and the vRNA-dependent RNA polymerase in phloem sieve elements and in xylem vessels. Transmission electron microscopy observations showed the presence in the xylem vessels of vRNA-containing vesicles that were associated with viral particles. Stem-girdling experiments, which leave xylem vessels intact but destroy the surrounding tissues, confirmed that TuMV could establish a systemic infection of the plant by going through xylem vessels. Phloem sieve elements and xylem vessels from Potato virus X-infected plants also contained lipid-associated nonencapsidated vRNA, indicating that the presence of membrane-associated ribonucleic protein complexes in the phloem and xylem may not be limited to TuMV. Collectively, these studies indicate that viral replication factories could end up in the phloem and the xylem. PMID:25717035

Analysis of DDT and its metabolites in soil and water samples obtained in the vicinity of a closed-down factory in Bangladesh using various extraction methods.

PubMed

Al Mahmud, M N U; Khalil, Farzana; Rahman, Md Musfiqur; Mamun, M I R; Shoeb, Mohammad; Abd El-Aty, A M; Park, Jong-Hyouk; Shin, Ho-Chul; Nahar, Nilufar; Shim, Jae-Han

2015-12-01

This study was conducted to monitor the spread of dichlorodiphenyltrichloroethane (DDT) and its metabolites (dichlorodiphenyldichloroethylene (DDE), dichlorodiphenyldichloroethane (DDD)) in soil and water to regions surrounding a closed DDT factory in Bangladesh. This fulfillment was accomplished using inter-method and inter-laboratory validation studies. DDTs (DDT and its metabolites) from soil samples were extracted using microwave-assisted extraction (MAE), supercritical fluid extraction (SFE), and solvent extraction (SE). Inter-laboratory calibration was assessed by SE, and all methods were validated by intra- and inter-day accuracy (expressed as recovery %) and precision (expressed as relative standard deviation (RSD)) in the same laboratory, at three fortified concentrations (n = 4). DDTs extracted from water samples by liquid-liquid partitioning and all samples were analyzed by gas chromatography (GC)-electron capture detector (ECD) and confirmed by GC/mass spectrometry (GC/MS). Linearities expressed as determination coefficients (R (2)) were ≥0.995 for matrix-matched calibrations. The recovery rate was in the range of 72-120 and 83-110%, with <15% RSD in soil and water, respectively. The limit of quantification (LOQ) was 0.0165 mg kg(-1) in soil and 0.132 μg L(-1) in water. Greater quantities of DDTs were extracted from soil using the MAE and SE techniques than with the SFE method. Higher amounts of DDTs were discovered in the southern (2.2-936 × 10(2) mg kg(-1)) or southwestern (86.3-2067 × 10(2) mg kg(-1)) direction from the factory than in the eastern direction (1.0-48.6 × 10(2) mg kg(-1)). An exception was the soil sample collected 50 ft (15.24 m) east (2904 × 10(2) mg kg(-1)) of the factory. The spread of DDTs in the water bodies (0.59-3.01 μg L(-1)) was approximately equal in all directions. We concluded that DDTs might have been dumped randomly around the warehouse after the closing of the factory.

Systems Factorial Technology provides new insights on global-local information processing in autism spectrum disorders.

PubMed

Johnson, Shannon A; Blaha, Leslie M; Houpt, Joseph W; Townsend, James T

2010-02-01

Previous studies of global-local processing in autism spectrum disorders (ASDs) have indicated mixed findings, with some evidence of a local processing bias, or preference for detail-level information, and other results suggesting typical global advantage, or preference for the whole or gestalt. Findings resulting from this paradigm have been used to argue for or against a detail focused processing bias in ASDs, and thus have important theoretical implications. We applied Systems Factorial Technology, and the associated Double Factorial Paradigm (both defined in the text), to examine information processing characteristics during a divided attention global-local task in high-functioning individuals with an ASD and typically developing controls. Group data revealed global advantage for both groups, contrary to some current theories of ASDs. Information processing models applied to each participant revealed that task performance, although showing no differences at the group level, was supported by different cognitive mechanisms in ASD participants compared to controls. All control participants demonstrated inhibitory parallel processing and the majority demonstrated a minimum-time stopping rule. In contrast, ASD participants showed exhaustive parallel processing with mild facilitatory interactions between global and local information. Thus our results indicate fundamental differences in the stopping rules and channel dependencies in individuals with an ASD.

TROPHI: development of a tool to measure complex, multi-factorial patient handling interventions.

PubMed

Fray, Mike; Hignett, Sue

2013-01-01

Patient handling interventions are complex and multi-factorial. It has been difficult to make comparisons across different strategies due to the lack of a comprehensive outcome measurement method. The Tool for Risk Outstanding in Patient Handling Interventions (TROPHI) was developed to address this gap by measuring outcomes and comparing performance across interventions. Focus groups were held with expert patient handling practitioners (n = 36) in four European countries (Finland, Italy, Portugal and the UK) to identify preferred outcomes to be measured for interventions. A systematic literature review identified 598 outcome measures; these were critically appraised and the most appropriate measurement tool was selected for each outcome. TROPHI was evaluated in the four EU countries (eight sites) and by an expert panel (n = 16) from the European Panel of Patient Handling Ergonomics for usability and practical application. This final stage added external validity to the research by exploring transferability potential and presenting the data and analysis to allow respondent (participant) validation. Patient handling interventions are complex and multi-factorial and it has been difficult to make comparisons due to the lack of a comprehensive outcome measurement method. The Tool for Risk Outstanding in Patient Handling Interventions (TROPHI) was developed to address this gap by measuring outcomes to compare performance across interventions.

Microbial Cell Factories for the Production of Terpenoid Flavor and Fragrance Compounds.

PubMed

Schempp, Florence M; Drummond, Laura; Buchhaupt, Markus; Schrader, Jens

2018-03-14

Terpenoid flavor and fragrance compounds are of high interest to the aroma industry. Microbial production offers an alternative sustainable access to the desired terpenoids independent of natural sources. Genetically engineered microorganisms can be used to synthesize terpenoids from cheap and renewable resources. Due to its modular architecture, terpenoid biosynthesis is especially well suited for the microbial cell factory concept: a platform host engineered for a high flux toward the central C 5 prenyl diphosphate precursors enables the production of a broad range of target terpenoids just by varying the pathway modules converting the C 5 intermediates to the product of interest. In this review typical terpenoid flavor and fragrance compounds marketed or under development by biotech and aroma companies are given, and the specificities of the aroma market are discussed. The main part of this work focuses on key strategies and recent advances to engineer microbes to become efficient terpenoid producers.

The Role of Synthetic Biology in the Design of Microbial Cell Factories for Biofuel Production

PubMed Central

Colin, Verónica Leticia; Rodríguez, Analía; Cristóbal, Héctor Antonio

2011-01-01

Insecurity in the supply of fossil fuels, volatile fuel prices, and major concerns regarding climate change have sparked renewed interest in the production of fuels from renewable resources. Because of this, the use of biodiesel has grown dramatically during the last few years and is expected to increase even further in the future. Biodiesel production through the use of microbial systems has marked a turning point in the field of biofuels since it is emerging as an attractive alternative to conventional technology. Recent progress in synthetic biology has accelerated the ability to analyze, construct, and/or redesign microbial metabolic pathways with unprecedented precision, in order to permit biofuel production that is amenable to industrial applications. The review presented here focuses specifically on the role of synthetic biology in the design of microbial cell factories for efficient production of biodiesel. PMID:22028591

Total fume and metal concentrations during welding in selected factories in Jeddah, Saudi Arabia.

PubMed

Balkhyour, Mansour Ahmed; Goknil, Mohammad Khalid

2010-07-01

Welding is a major industrial process used for joining metals. Occupational exposure to welding fumes is a serious occupational health problem all over the world. The degree of risk to welder's health from fumes depends on composition, concentration, and the length of exposure. The aim of this study was to investigate workers' welding fume exposure levels in some industries in Jeddah, Saudi Arabia. In each factory, the air in the breathing zone within 0.5 m from welders was sampled during 8-hour shifts. Total particulates, manganese, copper, and molybdenum concentrations of welding fumes were determined. Mean values of eight-hour average particulate concentrations measured during welding at the welders breathing zone were 6.3 mg/m(3) (Factory 1), 5.3 mg/m(3) (Factory 2), 11.3 mg/m(3) (Factory 3), 6.8 mg/m(3) (Factory 4), 4.7 mg/m(3) (Factory 5), and 3.0 mg/m(3) (Factory 6). Mean values of airborne manganese, copper, and molybdenum levels measured during welding were in the range of 0.010 mg/m(3)-0.477 mg/m(3), 0.001 mg/m(3)-0.080 mg/m(3) and 0.001 mg/m(3)-0.058 mg/m(3) respectively. Mean values of calculated equivalent exposure values were: 1.50 (Factory 1), 1.56 (Factory 2), 5.14 (Factory 3), 2.21 (Factory 4), 2.89 (Factory 5), and 1.20 (Factory 6). The welders in factories 1, 2, 3, and 4 were exposed to welding fume concentration above the SASO limit value, which may increase the risk of respiratory health problems.

Individual estimation of exposures to extremely low frequency magnetic fields in jobs commonly held by women.

PubMed

Deadman, J E; Infante-Rivard, C

2002-02-15

Exposures to extremely low frequency (ELF) magnetic fields have not been documented extensively in occupations besides the work environments of electric or telephone utilities. A 1980-1993 study of childhood acute lymphoblastic leukemia (ALL) in Québec, Canada, gathered detailed information about the occupations of 491 mothers of ALL cases and mothers of a similar number of healthy controls. This information was combined with published data on the intensities of ELF magnetic fields associated with sources or work environments to estimate ELF magnetic field exposures for a wide range of jobs commonly held by women. Estimated exposures for 61 job categories ranged from 0.03 to 0.68 microT; the 25th, 50th, and 75th percentiles were 0.135, 0.17, and 0.23 microT, respectively. By job category, the most highly exposed jobs (>0.23 microT) included bakery worker, cashier, cook and kitchen worker, electronics worker, residential and industrial sewing machine operator, and textile machine operator. By work environment, the most highly exposed job categories were electronics worker in an assembly plant (0.70 microT) and sewing machine operators in a textile factory (0.68 microT) and shoe factory (0.66 microT). These results provide new information on expected levels of exposure in a wide range of jobs commonly held by women.

Specialty hospitals emulating focused factories: a case study.

PubMed

Kumar, Sameer

2010-01-01

For 15 years general hospital managers faced new competition from for-profit specialty hospitals that operate on a "focused factory" model, which threaten to siphon-off the most profitable patients. This paper aims to discuss North American specialty hospitals and to review rising costs impact on general hospital operations. The focus is to discover whether specialty hospitals are more efficient than general hospitals; if so, how significant is the difference and also what can general hospitals do in light of the rising specialty hospitals. The case study involves stochastic frontier regression analysis using Cobb-Douglas and Translog cost functions to compare Minnesota general and specialty hospital efficiency. Analysis is based on data from 117 general and 19 specialty hospitals. The results suggest that specialty hospitals are significantly more efficient than general hospitals. Overall, general hospitals were found to be more than twice as inefficient compared with specialty hospitals in the sample. Some cost-cutting factors highlighted can be implemented to trim rising costs. The case study highlights some managerial levers that general hospital operational managers might use to control rising costs. This also helps them compete with specialty hospitals by reducing overheads and other major costs. The study is based on empirical modeling for an important healthcare operational challenge and provides additional in-depth information that has health policy implications. The analysis and findings enable healthcare managers to guide their institutions in a new direction during a time of change within the industry.

Interactions between cadmium and decabrominated diphenyl ether on blood cells count in rats-Multiple factorial regression analysis.

PubMed

Curcic, Marijana; Buha, Aleksandra; Stankovic, Sanja; Milovanovic, Vesna; Bulat, Zorica; Đukić-Ćosić, Danijela; Antonijević, Evica; Vučinić, Slavica; Matović, Vesna; Antonijevic, Biljana

2017-02-01

The objective of this study was to assess toxicity of Cd and BDE-209 mixture on haematological parameters in subacutely exposed rats and to determine the presence and type of interactions between these two chemicals using multiple factorial regression analysis. Furthermore, for the assessment of interaction type, an isobologram based methodology was applied and compared with multiple factorial regression analysis. Chemicals were given by oral gavage to the male Wistar rats weighing 200-240g for 28days. Animals were divided in 16 groups (8/group): control vehiculum group, three groups of rats were treated with 2.5, 7.5 or 15mg Cd/kg/day. These doses were chosen on the bases of literature data and reflect relatively high Cd environmental exposure, three groups of rats were treated with 1000, 2000 or 4000mg BDE-209/kg/bw/day, doses proved to induce toxic effects in rats. Furthermore, nine groups of animals were treated with different mixtures of Cd and BDE-209 containing doses of Cd and BDE-209 stated above. Blood samples were taken at the end of experiment and red blood cells, white blood cells and platelets counts were determined. For interaction assessment multiple factorial regression analysis and fitted isobologram approach were used. In this study, we focused on multiple factorial regression analysis as a method for interaction assessment. We also investigated the interactions between Cd and BDE-209 by the derived model for the description of the obtained fitted isobologram curves. Current study indicated that co-exposure to Cd and BDE-209 can result in significant decrease in RBC count, increase in WBC count and decrease in PLT count, when compared with controls. Multiple factorial regression analysis used for the assessment of interactions type between Cd and BDE-209 indicated synergism for the effect on RBC count and no interactions i.e. additivity for the effects on WBC and PLT counts. On the other hand, isobologram based approach showed slight antagonism for the effects on RBC and WBC while no interactions were proved for the joint effect on PLT count. These results confirm that the assessment of interactions between chemicals in the mixture greatly depends on the concept or method used for this evaluation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

An ergonomics study of a semiconductors factory in an IDC for improvement in occupational health and safety.

PubMed

Bin, Wong Saw; Richardson, Stanley; Yeow, Paul H P

2010-01-01

The study aimed to conduct an ergonomic intervention on a conventional line (CL) in a semiconductor factory in Malaysia, an industrially developing country (IDC), to improve workers' occupational health and safety (OHS). Low-cost and simple (LCS) ergonomics methods were used (suitable for IDCs), e.g., subjective assessment, direct observation, use of archival data and assessment of noise. It was found that workers were facing noise irritation, neck and back pains and headache in the various processes in the CL. LCS ergonomic interventions to rectify the problems included installing noise insulating covers, providing earplugs, installing elevated platforms, slanting visual display terminals and installing extra exhaust fans. The interventions cost less than 3 000 USD but they significantly improved workers' OHS, which directly correlated with an improvement in working conditions and job satisfaction. The findings are useful in solving OHS problems in electronics industries in IDCs as they share similar manufacturing processes, problems and limitations.

The National Shipbuilding Research Program, Computer Aided Process Planning for Shipyards

DTIC Science & Technology

1986-08-01

Factory Simulation with Conventional Factory Planning Techniques Financial Justification of State-of-the-Art Investment: A Study Using CAPP I–5 T I T L...and engineer to order.” “Factory Simulation: Approach to Integration of Computer- Based Factory Simulation with Conventional Factory Planning Techniques

Ultrastructure of the replication sites of positive-strand RNA viruses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harak, Christian; Lohmann, Volker, E-mail: volker_lohmann@med.uni-heidelberg.de

2015-05-15

Positive strand RNA viruses replicate in the cytoplasm of infected cells and induce intracellular membranous compartments harboring the sites of viral RNA synthesis. These replication factories are supposed to concentrate the components of the replicase and to shield replication intermediates from the host cell innate immune defense. Virus induced membrane alterations are often generated in coordination with host factors and can be grouped into different morphotypes. Recent advances in conventional and electron microscopy have contributed greatly to our understanding of their biogenesis, but still many questions remain how viral proteins capture membranes and subvert host factors for their need. Inmore » this review, we will discuss different representatives of positive strand RNA viruses and their ways of hijacking cellular membranes to establish replication complexes. We will further focus on host cell factors that are critically involved in formation of these membranes and how they contribute to viral replication. - Highlights: • Positive strand RNA viruses induce massive membrane alterations. • Despite the great diversity, replication complexes share many similarities. • Host factors play a pivotal role in replication complex biogenesis. • Use of the same host factors by several viruses hints to similar functions.« less

Synthetic biology and metabolic engineering.

PubMed

Stephanopoulos, Gregory

2012-11-16

Metabolic engineering emerged 20 years ago as the discipline occupied with the directed modification of metabolic pathways for the microbial synthesis of various products. As such, it deals with the engineering (design, construction, and optimization) of native as well as non-natural routes of product synthesis, aided in this task by the availability of synthetic DNA, the core enabling technology of synthetic biology. The two fields, however, only partially overlap in their interest in pathway engineering. While fabrication of biobricks, synthetic cells, genetic circuits, and nonlinear cell dynamics, along with pathway engineering, have occupied researchers in the field of synthetic biology, the sum total of these areas does not constitute a coherent definition of synthetic biology with a distinct intellectual foundation and well-defined areas of application. This paper reviews the origins of the two fields and advances two distinct paradigms for each of them: that of unit operations for metabolic engineering and electronic circuits for synthetic biology. In this context, metabolic engineering is about engineering cell factories for the biological manufacturing of chemical and pharmaceutical products, whereas the main focus of synthetic biology is fundamental biological research facilitated by the use of synthetic DNA and genetic circuits.

Psychometric Properties of the German Version of the Health Regulatory Focus Scale

PubMed Central

Schmalbach, Bjarne; Spina, Roy; Steffens-Guerra, Ileana; Franke, Gabriele H.; Kliem, Sören; Michaelides, Michalis P.; Hinz, Andreas; Zenger, Markus

2017-01-01

The Health Regulatory Focus Scale (HRFS) is a short scale which measures an individual's prevention and promotion focus in a health-specific context. The main objective of this study was to examine the psychometric properties of the newly translated German version of the HRFS. Reliability and item characteristics were found to be satisfactory. Validity of both subscales toward other psychological constructs including behavioral approach and avoidance, core self-evaluations, optimism, pessimism, neuroticism, as well as several measures of physical and mental health was shown. In addition, invariance of the measure across age and gender groups was shown. Exploratory as well as confirmatory factor analyses clearly indicated a two-factorial structure with a moderate correlation between the two latent constructs. Differences in health promotion and prevention focus between socio-demographic groups are discussed. The HRFS is found to be a valid and reliable instrument for the assessment of regulatory focus in health-related environments. PMID:29184528

Investigation and Evaluation of Children’s Blood Lead Levels around a Lead Battery Factory and Influencing Factors

PubMed Central

Zhang, Feng; Liu, Yang; Zhang, Hengdong; Ban, Yonghong; Wang, Jianfeng; Liu, Jian; Zhong, Lixing; Chen, Xianwen; Zhu, Baoli

2016-01-01

Lead pollution incidents have occurred frequently in mainland China, which has caused many lead poisoning incidents. This paper took a battery recycling factory as the subject, and focused on measuring the blood lead levels of environmental samples and all the children living around the factory, and analyzed the relationship between them. We collected blood samples from the surrounding residential area, as well as soil, water, vegetables. The atomic absorption method was applied to measure the lead content in these samples. The basic information of the generation procedure, operation type, habit and personal protect equipment was collected by an occupational hygiene investigation. Blood lead levels in 43.12% of the subjects exceeded 100 μg/L. The 50th and the 95th percentiles were 89 μg/L and 232 μg/L for blood lead levels in children, respectively, and the geometric mean was 94 μg/L. Children were stratified into groups by age, gender, parents’ occupation, distance and direction from the recycling plant. The difference of blood lead levels between groups was significant (p < 0.05). Four risk factors for elevated blood lead levels were found by logistic regression analysis, including younger age, male, shorter distance from the recycling plant, and parents with at least one working in the recycling plant. The rate of excess lead concentration in water was 6.25%, 6.06% in soil and 44.44% in leaf vegetables, which were all higher than the Chinese environment standards. The shorter the distance to the factory, the higher the value of BLL and lead levels in vegetable and environment samples. The lead level in the environmental samples was higher downwind of the recycling plant. PMID:27240393

Industrial hygiene, occupational safety and respiratory symptoms in the Pakistani cotton industry.

PubMed

Khan, Abdul Wali; Moshammer, Hanns Michael; Kundi, Michael

2015-04-02

In the cotton industry of Pakistan, 15 million people are employed and exposed to cotton dust, toxic chemicals, noise and physical hazards. The aim of this study was to determine the prevalence of health symptoms, particularly respiratory symptoms, and to measure cotton dust and endotoxin levels in different textile factories of Faisalabad, Pakistan. A cross-sectional investigation was performed in a representative sample of 47 cotton factories in the Faisalabad region in Punjab, Pakistan. Respiratory symptoms of 800 workers were documented by questionnaire. Occupational safety in the factories was assessed by a trained expert following a checklist, and dust and endotoxin levels in different work areas were measured. Prevalence of respiratory disease symptoms (fever, shortness of breath, chest tightness and cough) was generally high and highest in the weaving section of the cotton industry (20-40% depending on symptoms). This section also displayed the poorest occupational safety ratings and the highest levels of inhalable cotton dust (mean±SD 4.6±2.5 vs 0.95±0.65 mg/m(3) in compact units). In contrast, endotoxin levels were highest in the spinning section (median 1521 EU/m(3)), where high humidity is maintained. There are still poor working conditions in the cotton industry in Pakistan where workers are exposed to different occupational hazards. More health symptoms were reported from small weaving factories (power looms). There is a dire need for improvements in occupational health and safety in this industrial sector with particular focus on power looms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

After-shift Musculoskeletal Disorder Symptoms in Female Workers and Work-related Factors: A Cross-sectional Study in a Seafood Processing Factory in Vietnam.

PubMed

Tran, Thuy Thi Thu; Phan, Chinh Thi Thuy; Pham, Tuan Cong; Nguyen, Quynh Thuy

2016-01-01

The seafood processing industry has been developing and providing marked contribution to Vietnam's economic growth in recent years. However, information on working conditions and their impacts to workers' health in this sector, focusing on musculoskeletal problems in female workers, has been poorly documented. This paper examines the prevalence of after-shift musculoskeletal disorder symptoms (A-MSDS) and work-related factors in female workers in a seafood processing factory in Vietnam. As part of a comprehensive study, a cross-sectional survey was implemented in one seafood processing factory in the center of Vietnam in 2014. A self-administered questionnaire was completed by 394 female workers to collect information about their A-MSDS state, demographic characteristics, health status and work conditions. Descriptive analysis and logistic regression were applied to describe and analyse the results. Nearly four-fifths of female workers experienced MSDs in at least one body part (77.7%) and 20.1% of them had MSDs in all investigated regions. The prevalence of A-MSDS in different body parts markedly varied, with the proportion of pain in the hips and lower extremities being as high as 53.3%, followed by pain in the shoulders and upper extremities (42.6%) and the neck (41.1%). A humid working environment, exposure to vibration and chemicals as well as taxing task demands and work organizations were found to significantly contribute to the increased risk of after-shift musculoskeletal disorders in female workers. Approximately 80% of female workers in the seafood processing factory experienced musculoskeletal pains after work, especially in the hips, extremities, neck and shoulders which were contributed by work conditions and task demands.

Investigation and Evaluation of Children's Blood Lead Levels around a Lead Battery Factory and Influencing Factors.

PubMed

Zhang, Feng; Liu, Yang; Zhang, Hengdong; Ban, Yonghong; Wang, Jianfeng; Liu, Jian; Zhong, Lixing; Chen, Xianwen; Zhu, Baoli

2016-05-28

Lead pollution incidents have occurred frequently in mainland China, which has caused many lead poisoning incidents. This paper took a battery recycling factory as the subject, and focused on measuring the blood lead levels of environmental samples and all the children living around the factory, and analyzed the relationship between them. We collected blood samples from the surrounding residential area, as well as soil, water, vegetables. The atomic absorption method was applied to measure the lead content in these samples. The basic information of the generation procedure, operation type, habit and personal protect equipment was collected by an occupational hygiene investigation. Blood lead levels in 43.12% of the subjects exceeded 100 μg/L. The 50th and the 95th percentiles were 89 μg/L and 232 μg/L for blood lead levels in children, respectively, and the geometric mean was 94 μg/L. Children were stratified into groups by age, gender, parents' occupation, distance and direction from the recycling plant. The difference of blood lead levels between groups was significant (p < 0.05). Four risk factors for elevated blood lead levels were found by logistic regression analysis, including younger age, male, shorter distance from the recycling plant, and parents with at least one working in the recycling plant. The rate of excess lead concentration in water was 6.25%, 6.06% in soil and 44.44% in leaf vegetables, which were all higher than the Chinese environment standards. The shorter the distance to the factory, the higher the value of BLL and lead levels in vegetable and environment samples. The lead level in the environmental samples was higher downwind of the recycling plant.

After-shift Musculoskeletal Disorder Symptoms in Female Workers and Work-related Factors: A Cross-sectional Study in a Seafood Processing Factory in Vietnam

PubMed Central

Tran, Thuy Thi Thu; Phan, Chinh Thi Thuy; Pham, Tuan Cong; Nguyen, Quynh Thuy

2016-01-01

Background The seafood processing industry has been developing and providing marked contribution to Vietnam's economic growth in recent years. However, information on working conditions and their impacts to workers' health in this sector, focusing on musculoskeletal problems in female workers, has been poorly documented. Objectives This paper examines the prevalence of after-shift musculoskeletal disorder symptoms (A-MSDS) and work-related factors in female workers in a seafood processing factory in Vietnam. Materials and Methods As part of a comprehensive study, a cross-sectional survey was implemented in one seafood processing factory in the center of Vietnam in 2014. A self-administered questionnaire was completed by 394 female workers to collect information about their A-MSDS state, demographic characteristics, health status and work conditions. Descriptive analysis and logistic regression were applied to describe and analyse the results. Results Nearly four-fifths of female workers experienced MSDs in at least one body part (77.7%) and 20.1% of them had MSDs in all investigated regions. The prevalence of A-MSDS in different body parts markedly varied, with the proportion of pain in the hips and lower extremities being as high as 53.3%, followed by pain in the shoulders and upper extremities (42.6%) and the neck (41.1%). A humid working environment, exposure to vibration and chemicals as well as taxing task demands and work organizations were found to significantly contribute to the increased risk of after-shift musculoskeletal disorders in female workers. Conclusion Approximately 80% of female workers in the seafood processing factory experienced musculoskeletal pains after work, especially in the hips, extremities, neck and shoulders which were contributed by work conditions and task demands. PMID:29546192

The Walking Interventions Through Texting (WalkIT) Trial: Rationale, Design, and Protocol for a Factorial Randomized Controlled Trial of Adaptive Interventions for Overweight and Obese, Inactive Adults.

PubMed

Hurley, Jane C; Hollingshead, Kevin E; Todd, Michael; Jarrett, Catherine L; Tucker, Wesley J; Angadi, Siddhartha S; Adams, Marc A

2015-09-11

Walking is a widely accepted and frequently targeted health promotion approach to increase physical activity (PA). Interventions to increase PA have produced only small improvements. Stronger and more potent behavioral intervention components are needed to increase time spent in PA, improve cardiometabolic risk markers, and optimize health. Our aim is to present the rationale and methods from the WalkIT Trial, a 4-month factorial randomized controlled trial (RCT) in inactive, overweight/obese adults. The main purpose of the study was to evaluate whether intensive adaptive components result in greater improvements to adults' PA compared to the static intervention components. Participants enrolled in a 2x2 factorial RCT and were assigned to one of four semi-automated, text message-based walking interventions. Experimental components included adaptive versus static steps/day goals, and immediate versus delayed reinforcement. Principles of percentile shaping and behavioral economics were used to operationalize experimental components. A Fitbit Zip measured the main outcome: participants' daily physical activity (steps and cadence) over the 4-month duration of the study. Secondary outcomes included self-reported PA, psychosocial outcomes, aerobic fitness, and cardiorespiratory risk factors assessed pre/post in a laboratory setting. Participants were recruited through email listservs and websites affiliated with the university campus, community businesses and local government, social groups, and social media advertising. This study has completed data collection as of December 2014, but data cleaning and preliminary analyses are still in progress. We expect to complete analysis of the main outcomes in late 2015 to early 2016. The Walking Interventions through Texting (WalkIT) Trial will further the understanding of theory-based intervention components to increase the PA of men and women who are healthy, insufficiently active and are overweight or obese. WalkIT is one of the first studies focusing on the individual components of combined goal setting and reward structures in a factorial design to increase walking. The trial is expected to produce results useful to future research interventions and perhaps industry initiatives, primarily focused on mHealth, goal setting, and those looking to promote behavior change through performance-based incentives. ClinicalTrials.gov NCT02053259; https://clinicaltrials.gov/ct2/show/NCT02053259 (Archived by WebCite at http://www.webcitation.org/6b65xLvmg).

Investigation Of The Effects Of Reflow Profile Parameters On Lead-free Solder Bump Volumes And Joint Integrity

NASA Astrophysics Data System (ADS)

Amalu, E. H.; Lui, Y. T.; Ekere, N. N.; Bhatti, R. S.; Takyi, G.

2011-01-01

The electronics manufacturing industry was quick to adopt and use the Surface Mount Technology (SMT) assembly technique on realization of its huge potentials in achieving smaller, lighter and low cost product implementations. Increasing global customer demand for miniaturized electronic products is a key driver in the design, development and wide application of high-density area array package format. Electronic components and their associated solder joints have reduced in size as the miniaturization trend in packaging continues to be challenged by printing through very small stencil apertures required for fine pitch flip-chip applications. At very narrow aperture sizes, solder paste rheology becomes crucial for consistent paste withdrawal. The deposition of consistent volume of solder from pad-to-pad is fundamental to minimizing surface mount assembly defects. This study investigates the relationship between volume of solder paste deposit (VSPD) and the volume of solder bump formed (VSBF) after reflow, and the effect of reflow profile parameters on lead-free solder bump formation and the associated solder joint integrity. The study uses a fractional factorial design (FFD) of 24-1 Ramp-Soak-Spike reflow profile, with all main effects and two-way interactions estimable to determine the optimal factorial combination. The results from the study show that the percentage change in the VSPD depends on the combination of the process parameters and reliability issues could become critical as the size of solder joints soldered on the same board assembly vary greatly. Mathematical models describe the relationships among VSPD, VSBF and theoretical volume of solder paste. Some factors have main effects across the volumes and a number of interactions exist among them. These results would be useful for R&D personnel in designing and implementing newer applications with finer-pitch interconnect.

Effects of Levels of Automation for Advanced Small Modular Reactors: Impacts on Performance, Workload, and Situation Awareness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johanna Oxstrand; Katya Le Blanc

The Human-Automation Collaboration (HAC) research effort is a part of the Department of Energy (DOE) sponsored Advanced Small Modular Reactor (AdvSMR) program conducted at Idaho National Laboratory (INL). The DOE AdvSMR program focuses on plant design and management, reduction of capital costs as well as plant operations and maintenance costs (O&M), and factory production costs benefits.

An Analysis of the Relationship between School Managers' Change Leadership Style and Multi-Factorial Leadership Styles from the Views of Teachers

ERIC Educational Resources Information Center

Ozkan, Suna; Alev, Sedat; Ercan, Abdulkadir

2015-01-01

The aim of this study has been to identify school managers' leadership styles and levels in terms of teachers' perceptions. The focus of the study includes primary, secondary and high schools in Sahinbey and Sehitkamil districts of Gaziantep. In the study, the selection of the sample, which consists of 228 teachers, was carried out by using the…

Plasma Charge Current for Controlling and Monitoring Electron Beam Welding with Beam Oscillation

PubMed Central

Trushnikov, Dmitriy; Belenkiy, Vladimir; Shchavlev, Valeriy; Piskunov, Anatoliy; Abdullin, Aleksandr; Mladenov, Georgy

2012-01-01

Electron beam welding (EBW) shows certain problems with the control of focus regime. The electron beam focus can be controlled in electron-beam welding based on the parameters of a secondary signal. In this case, the parameters like secondary emissions and focus coil current have extreme relationships. There are two values of focus coil current which provide equal value signal parameters. Therefore, adaptive systems of electron beam focus control use low-frequency scanning of focus, which substantially limits the operation speed of these systems and has a negative effect on weld joint quality. The purpose of this study is to develop a method for operational control of the electron beam focus during welding in the deep penetration mode. The method uses the plasma charge current signal as an additional informational parameter. This parameter allows identification of the electron beam focus regime in electron-beam welding without application of additional low-frequency scanning of focus. It can be used for working out operational electron beam control methods focusing exactly on the welding. In addition, use of this parameter allows one to observe the shape of the keyhole during the welding process. PMID:23242276

Plasma charge current for controlling and monitoring electron beam welding with beam oscillation.

PubMed

Trushnikov, Dmitriy; Belenkiy, Vladimir; Shchavlev, Valeriy; Piskunov, Anatoliy; Abdullin, Aleksandr; Mladenov, Georgy

2012-12-14

Electron beam welding (EBW) shows certain problems with the control of focus regime. The electron beam focus can be controlled in electron-beam welding based on the parameters of a secondary signal. In this case, the parameters like secondary emissions and focus coil current have extreme relationships. There are two values of focus coil current which provide equal value signal parameters. Therefore, adaptive systems of electron beam focus control use low-frequency scanning of focus, which substantially limits the operation speed of these systems and has a negative effect on weld joint quality. The purpose of this study is to develop a method for operational control of the electron beam focus during welding in the deep penetration mode. The method uses the plasma charge current signal as an additional informational parameter. This parameter allows identification of the electron beam focus regime in electron-beam welding without application of additional low-frequency scanning of focus. It can be used for working out operational electron beam control methods focusing exactly on the welding. In addition, use of this parameter allows one to observe the shape of the keyhole during the welding process.

Performance and applications of the 14 MEV electron radiation linac at CIAE

NASA Astrophysics Data System (ADS)

Zhai, X. L.; Chen, G. C.; Qi, B. M.; Xu, F. J.; Pan, L. H.; Zhang, Z. M.; Shi, X. Z.; Chen, J. K.; Wang, F. Y.

1993-07-01

A 14 MeV electron linear accelerator which was designed and manufactured by the China Institute of Atomic Energy (CIAE) has been modified into an radiation processing accelerator in 1987. It consists of an electron gun, two prebunchers, one buncher, a three meter long accelerating section, and a 90 degree bending magnet. The linac is S-band (2856 MHz), travelling wave accelerator driven by a Chinese-made klystron. The energy of electrons can be adjusted from 8 MeV to 18 MeV and the average beam power is about 2 kW. The beam width is 600 mm and the uniformity of scanning beam is better than 10%. The linac is used to irradiate power semiconductor devices for controlling the minority carrier lifetime (MCL). More than twenty factories and scientific institutions use this linac to irradiate silicon controlled rectifiers (SCR) and the fast recovery diodes (FRD), and more than 0.2 million pieces of SCR have been irradiated. Tests have also been carried out for colour-change of topaz.

1. VIEW TO SOUTHEAST (NORTHWEST CORNER OF EDIBLE FATS FACTORY) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW TO SOUTHEAST (NORTHWEST CORNER OF EDIBLE FATS FACTORY) - Wilson's Oil House, Lard Refinery, & Edible Fats Factory, Edible Fats Factory, 2801 Southwest Fifteenth Street, Oklahoma City, Oklahoma County, OK

3. VIEW TO SOUTHWEST (NORTHEAST CORNER OF EDIBLE FATS FACTORY) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW TO SOUTHWEST (NORTHEAST CORNER OF EDIBLE FATS FACTORY) - Wilson's Oil House, Lard Refinery, & Edible Fats Factory, Edible Fats Factory, 2801 Southwest Fifteenth Street, Oklahoma City, Oklahoma County, OK

Results on 3D interconnection from AIDA WP3

NASA Astrophysics Data System (ADS)

Moser, Hans-Günther; AIDA-WP3

2016-09-01

From 2010 to 2014 the EU funded AIDA project established in one of its work packages (WP3) a network of groups working collaboratively on advanced 3D integration of electronic circuits and semiconductor sensors for applications in particle physics. The main motivation came from the severe requirements on pixel detectors for tracking and vertexing at future Particle Physics experiments at LHC, super-B factories and linear colliders. To go beyond the state-of-the-art, the main issues were studying low mass, high bandwidth applications, with radiation hardness capabilities, with low power consumption, offering complex functionality, with small pixel size and without dead regions. The interfaces and interconnects of sensors to electronic readout integrated circuits are a key challenge for new detector applications.

IRIDE: Interdisciplinary research infrastructure based on dual electron linacs and lasers

NASA Astrophysics Data System (ADS)

Ferrario, M.; Alesini, D.; Alessandroni, M.; Anania, M. P.; Andreas, S.; Angelone, M.; Arcovito, A.; Arnesano, F.; Artioli, M.; Avaldi, L.; Babusci, D.; Bacci, A.; Balerna, A.; Bartalucci, S.; Bedogni, R.; Bellaveglia, M.; Bencivenga, F.; Benfatto, M.; Biedron, S.; Bocci, V.; Bolognesi, M.; Bolognesi, P.; Boni, R.; Bonifacio, R.; Boscherini, F.; Boscolo, M.; Bossi, F.; Broggi, F.; Buonomo, B.; Calo, V.; Catone, D.; Capogni, M.; Capone, M.; Cassou, K.; Castellano, M.; Castoldi, A.; Catani, L.; Cavoto, G.; Cherubini, N.; Chirico, G.; Cestelli-Guidi, M.; Chiadroni, E.; Chiarella, V.; Cianchi, A.; Cianci, M.; Cimino, R.; Ciocci, F.; Clozza, A.; Collini, M.; Colo, G.; Compagno, A.; Contini, G.; Coreno, M.; Cucini, R.; Curceanu, C.; Curciarello, F.; Dabagov, S.; Dainese, E.; Davoli, I.; Dattoli, G.; De Caro, L.; De Felice, P.; De Leo, V.; Dell Agnello, S.; Della Longa, S.; Delle Monache, G.; De Spirito, M.; Di Cicco, A.; Di Donato, C.; Di Gioacchino, D.; Di Giovenale, D.; Di Palma, E.; Di Pirro, G.; Dodaro, A.; Doria, A.; Dosselli, U.; Drago, A.; Dupraz, K.; Escribano, R.; Esposito, A.; Faccini, R.; Ferrari, A.; Filabozzi, A.; Filippetto, D.; Fiori, F.; Frasciello, O.; Fulgentini, L.; Gallerano, G. P.; Gallo, A.; Gambaccini, M.; Gatti, C.; Gatti, G.; Gauzzi, P.; Ghigo, A.; Ghiringhelli, G.; Giannessi, L.; Giardina, G.; Giannini, C.; Giorgianni, F.; Giovenale, E.; Giulietti, D.; Gizzi, L.; Guaraldo, C.; Guazzoni, C.; Gunnella, R.; Hatada, K.; Iannone, M.; Ivashyn, S.; Jegerlehner, F.; Keeffe, P. O.; Kluge, W.; Kupsc, A.; Labate, L.; Levi Sandri, P.; Lombardi, V.; Londrillo, P.; Loreti, S.; Lorusso, A.; Losacco, M.; Lukin, A.; Lupi, S.; Macchi, A.; Magazù, S.; Mandaglio, G.; Marcelli, A.; Margutti, G.; Mariani, C.; Mariani, P.; Marzo, G.; Masciovecchio, C.; Masjuan, P.; Mattioli, M.; Mazzitelli, G.; Merenkov, N. P.; Michelato, P.; Migliardo, F.; Migliorati, M.; Milardi, C.; Milotti, E.; Milton, S.; Minicozzi, V.; Mobilio, S.; Morante, S.; Moricciani, D.; Mostacci, A.; Muccifora, V.; Murtas, F.; Musumeci, P.; Nguyen, F.; Orecchini, A.; Organtini, G.; Ottaviani, P. L.; Pace, C.; Pace, E.; Paci, M.; Pagani, C.; Pagnutti, S.; Palmieri, V.; Palumbo, L.; Panaccione, G. C.; Papadopoulos, C. F.; Papi, M.; Passera, M.; Pasquini, L.; Pedio, M.; Perrone, A.; Petralia, A.; Petrarca, M.; Petrillo, C.; Petrillo, V.; Pierini, P.; Pietropaolo, A.; Pillon, M.; Polosa, A. D.; Pompili, R.; Portoles, J.; Prosperi, T.; Quaresima, C.; Quintieri, L.; Rau, J. V.; Reconditi, M.; Ricci, A.; Ricci, R.; Ricciardi, G.; Ricco, G.; Ripani, M.; Ripiccini, E.; Romeo, S.; Ronsivalle, C.; Rosato, N.; Rosenzweig, J. B.; Rossi, A. A.; Rossi, A. R.; Rossi, F.; Rossi, G.; Russo, D.; Sabatucci, A.; Sabia, E.; Sacchetti, F.; Salducco, S.; Sannibale, F.; Sarri, G.; Scopigno, T.; Sekutowicz, J.; Serafini, L.; Sertore, D.; Shekhovtsova, O.; Spassovsky, I.; Spadaro, T.; Spataro, B.; Spinozzi, F.; Stecchi, A.; Stellato, F.; Surrenti, V.; Tenore, A.; Torre, A.; Trentadue, L.; Turchini, S.; Vaccarezza, C.; Vacchi, A.; Valente, P.; Venanzoni, G.; Vescovi, S.; Villa, F.; Zanotti, G.; Zema, N.; Zobov, M.; Zomer, F.

2014-03-01

This paper describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity "particles factory", based on a combination of high duty cycle radio-frequency superconducting electron linacs and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE is also supposed to be realized in subsequent stages of development depending on the assigned priorities.

4. SOUTHEAST CORNER OF EDIBLE FATS FACTORY (CONNECTING BUILDING ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. SOUTHEAST CORNER OF EDIBLE FATS FACTORY (CONNECTING BUILDING ON THE LEFT) - Wilson's Oil House, Lard Refinery, & Edible Fats Factory, Edible Fats Factory, 2801 Southwest Fifteenth Street, Oklahoma City, Oklahoma County, OK

Particulate matters collected from ceramic factories in Lampang Province affecting rat lungs*

PubMed Central

Fongmoon, Duriya; Pongnikorn, Surathat; Chaisena, Aphiruk; Iamsaard, Sitthichai

2014-01-01

Background: Lung cancer ranks as the fifth largest of all cancer cases in Thailand. However, it is the first leading cancer in the northern part of Thailand (data from 2003–2007). There are several predisposing causes that lead to lung cancer and one important inducement is particulate matters (PMs). Lampang Province in Thailand is famous for the ceramic industry, where there are over 200 ceramic industrial factories. PMs are produced during the ceramic manufacturing process and spread throughout all of the working areas. It is very possible that workers could directly inhale PM-contaminated air during working hours. Objective: This study focuses on the toxic effects of PMs collected from ceramic factories on genes and lungs of rats. Methods: PMs collected from six ceramic factories in Lampang Province were extracted using dimethyl sulfoxide (DMSO). The inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) were used to analyze the chemical elements at lower and higher concentrations, respectively. Then, the toxicity of PMs on the genes was examined by the Ames test, and subsequently, the effect of PMs on DNA was examined by quantifying the amount of 8-hydroxy-2′-deoxyguanosine (8-OHdG). Finally, the toxicity of the PMs on rat’s lungs was examined by histology. Results: As chemical elements of lower concentrations, cadmium, chromium, nickel, copper, and lead were detected by ICP-MS. As chemical elements of higher concentrations, manganese, magnesium, zinc, iron, potassium, calcium, and sodium were detected by ICP-OES. No mutagenicity in Salmonella typhimurium was found in the PM extracts from all six factories by utilizing the Ames test. In the histological study, the reduction in spaces of alveolar ducts and sacs, and terminal bronchioles, the thickening of interstitial connective tissues were noted by PM extracts in high amounts (100 and 350 μg). Female rats were more sensitive to PM extracts than males in terms of their pulmonary damages. Conclusions: PMs were not mutagenic to S. typhimurium but can damage the lung tissue of rats. PMID:24390747

Determinants of Wood Dust Exposure in the Danish Furniture Industry—Results from Two Cross-Sectional Studies 6 Years Apart

PubMed Central

Schlünssen, Vivi; Jacobsen, Gitte; Erlandsen, Mogens; Mikkelsen, Anders B.; Schaumburg, Inger; Sigsgaard, Torben

2008-01-01

Objectives: This paper investigates determinants of wood dust exposure and trends in dust level in the furniture industry of Viborg County, Denmark, using data from two cross-sectional studies 6 years apart. Methods: During the winter 1997/1998, 54 factories were visited (hereafter study 1). In the winter 2003/2004, 27 factories were revisited, and personal dust measurements were repeated. In addition, 14 new factories were included (hereafter study 2). A total of 2303 woodworkers participated in study 1, and 2358 measurements from 1702 workers were available. From study 2, 1581 woodworkers participated and 1355 measurements from 1044 workers were available. Information on occupational variables describing potential determinants of exposures like work task, exhaust ventilation, enclosure and cleaning procedures were collected. A total of 2627 measurements and 1907 persons were included in the final mixed model in order to explore determinants of exposure and trends in dust level. Results: The overall inhalable wood dust concentration (geometric means (geometric standard deviation)) has decreased from 0.95 mg/m3 (2.05) in study 1 to 0.60 mg/m3 (1.63) in study 2, representing a 7% annual decrease in dust concentration, which was confirmed in the mixed model. From study 1 to study 2 there has been a change towards less manual work and more efficient cleaning methods, but on the contrary also more inadequate exhaust ventilation systems. The following determinants were found to ‘increase’ dust concentration: sanding; use of compressed air; use of full-automatic machines; manual work; cleaning of work pieces with compressed air; kitchen producing factories and small factories (<20 employees). The following determinants of exposure were found to ‘decrease’ dust concentration: manual assembling/packing; sanding with adequate exhaust ventilation; adequate exhaust ventilation; vacuum cleaning of machines and special cleaning staff. Conclusions: Despite a substantial drop in the dust concentration during the last 6 years in the furniture industry in Viborg County, further improvements are possible. There should be more focus on improved exhaust ventilation, professional cleaning methods and avoiding use of compressed air. PMID:18407937

Determinants of wood dust exposure in the Danish furniture industry--results from two cross-sectional studies 6 years apart.

PubMed

Schlünssen, Vivi; Jacobsen, Gitte; Erlandsen, Mogens; Mikkelsen, Anders B; Schaumburg, Inger; Sigsgaard, Torben

2008-06-01

This paper investigates determinants of wood dust exposure and trends in dust level in the furniture industry of Viborg County, Denmark, using data from two cross-sectional studies 6 years apart. During the winter 1997/1998, 54 factories were visited (hereafter study 1). In the winter 2003/2004, 27 factories were revisited, and personal dust measurements were repeated. In addition, 14 new factories were included (hereafter study 2). A total of 2303 woodworkers participated in study 1, and 2358 measurements from 1702 workers were available. From study 2, 1581 woodworkers participated and 1355 measurements from 1044 workers were available. Information on occupational variables describing potential determinants of exposures like work task, exhaust ventilation, enclosure and cleaning procedures were collected. A total of 2627 measurements and 1907 persons were included in the final mixed model in order to explore determinants of exposure and trends in dust level. The overall inhalable wood dust concentration (geometric means (geometric standard deviation)) has decreased from 0.95 mg/m(3) (2.05) in study 1 to 0.60 mg/m(3) (1.63) in study 2, representing a 7% annual decrease in dust concentration, which was confirmed in the mixed model. From study 1 to study 2 there has been a change towards less manual work and more efficient cleaning methods, but on the contrary also more inadequate exhaust ventilation systems. The following determinants were found to 'increase' dust concentration: sanding; use of compressed air; use of full-automatic machines; manual work; cleaning of work pieces with compressed air; kitchen producing factories and small factories (<20 employees). The following determinants of exposure were found to 'decrease' dust concentration: manual assembling/packing; sanding with adequate exhaust ventilation; adequate exhaust ventilation; vacuum cleaning of machines and special cleaning staff. Despite a substantial drop in the dust concentration during the last 6 years in the furniture industry in Viborg County, further improvements are possible. There should be more focus on improved exhaust ventilation, professional cleaning methods and avoiding use of compressed air.

An Assessment of the Dimensionality and Factorial Structure of the Revised Paranormal Belief Scale

PubMed Central

Drinkwater, Kenneth; Denovan, Andrew; Dagnall, Neil; Parker, Andrew

2017-01-01

Since its introduction, the Revised Paranormal Belief Scale (RPBS) has developed into a principal measure of belief in the paranormal. Accordingly, the RPBS regularly appears within parapsychological research. Despite common usage, academic debates continue to focus on the factorial structure of the RPBS and its psychometric integrity. Using an aggregated heterogeneous sample (N = 3,764), the present study tested the fit of 10 factorial models encompassing variants of the most commonly proposed solutions (seven, five, two, and one-factor) plus new bifactor alternatives. A comparison of competing models revealed a seven-factor bifactor solution possessed superior data-model fit (CFI = 0.945, TLI = 0.933, IFI = 0.945, SRMR = 0.046, RMSEA = 0.058), containing strong factor loadings for a general factor and weaker, albeit acceptable, factor loadings for seven subfactors. This indicated that belief in the paranormal, as measured by the RPBS, is best characterized as a single overarching construct, comprising several related, but conceptually independent subfactors. Furthermore, women reported significantly higher paranormal belief scores than men, and tests of invariance indicated that mean differences in gender are unlikely to reflect measurement bias. Results indicate that despite concerns about the content and psychometric integrity of the RPBS the measure functions well at both a global and seven-factor level. Indeed, the original seven-factors contaminate alternative solutions. PMID:29018398

Multifractals embedded in short time series: An unbiased estimation of probability moment

NASA Astrophysics Data System (ADS)

Qiu, Lu; Yang, Tianguang; Yin, Yanhua; Gu, Changgui; Yang, Huijie

2016-12-01

An exact estimation of probability moments is the base for several essential concepts, such as the multifractals, the Tsallis entropy, and the transfer entropy. By means of approximation theory we propose a new method called factorial-moment-based estimation of probability moments. Theoretical prediction and computational results show that it can provide us an unbiased estimation of the probability moments of continuous order. Calculations on probability redistribution model verify that it can extract exactly multifractal behaviors from several hundred recordings. Its powerfulness in monitoring evolution of scaling behaviors is exemplified by two empirical cases, i.e., the gait time series for fast, normal, and slow trials of a healthy volunteer, and the closing price series for Shanghai stock market. By using short time series with several hundred lengths, a comparison with the well-established tools displays significant advantages of its performance over the other methods. The factorial-moment-based estimation can evaluate correctly the scaling behaviors in a scale range about three generations wider than the multifractal detrended fluctuation analysis and the basic estimation. The estimation of partition function given by the wavelet transform modulus maxima has unacceptable fluctuations. Besides the scaling invariance focused in the present paper, the proposed factorial moment of continuous order can find its various uses, such as finding nonextensive behaviors of a complex system and reconstructing the causality relationship network between elements of a complex system.

An Assessment of the Dimensionality and Factorial Structure of the Revised Paranormal Belief Scale.

PubMed

Drinkwater, Kenneth; Denovan, Andrew; Dagnall, Neil; Parker, Andrew

2017-01-01

Since its introduction, the Revised Paranormal Belief Scale (RPBS) has developed into a principal measure of belief in the paranormal. Accordingly, the RPBS regularly appears within parapsychological research. Despite common usage, academic debates continue to focus on the factorial structure of the RPBS and its psychometric integrity. Using an aggregated heterogeneous sample ( N = 3,764), the present study tested the fit of 10 factorial models encompassing variants of the most commonly proposed solutions (seven, five, two, and one-factor) plus new bifactor alternatives. A comparison of competing models revealed a seven-factor bifactor solution possessed superior data-model fit (CFI = 0.945, TLI = 0.933, IFI = 0.945, SRMR = 0.046, RMSEA = 0.058), containing strong factor loadings for a general factor and weaker, albeit acceptable, factor loadings for seven subfactors. This indicated that belief in the paranormal, as measured by the RPBS, is best characterized as a single overarching construct, comprising several related, but conceptually independent subfactors. Furthermore, women reported significantly higher paranormal belief scores than men, and tests of invariance indicated that mean differences in gender are unlikely to reflect measurement bias. Results indicate that despite concerns about the content and psychometric integrity of the RPBS the measure functions well at both a global and seven-factor level. Indeed, the original seven-factors contaminate alternative solutions.

Impacts of object-oriented technologies: Seven years of SEL studies

NASA Technical Reports Server (NTRS)

Stark, Mike

1993-01-01

This paper examines the premise that object-oriented technology (OOT) is the most significant technology ever examined by the Software Engineering Laboratory. The evolution of the use of OOT in the Software Engineering Laboratory (SEL) 'Experience Factory' is described in terms of the SEL's original expectations, focusing on how successive generations of projects have used OOT. General conclusions are drawn on how the usage of the technology has evolved in this environment.

Electron-Focus Adjustment for Photo-Optical Imagers

NASA Technical Reports Server (NTRS)

Fowler, Walter B.; Flemming, Keith; Ziegler, Michael M.

1987-01-01

Internal electron focus made independent of optical focus. Procedure enables fine tuning of internal electron-focusing system of photo-optical imager, without complication by imperfections of associated external optics. Applicable to imager in which electrons emitted from photocathode in optical focal plane, then electrostatically and/or magnetically focused to replica of image in second focal plane containing photodiodes, phototransistorss, charge-coupled devices, multiple-anode outputs, or other detectors.

Delivery of Brief Interventions for Heavy Drinking in Primary Care: Outcomes of the ODHIN 5-Country Cluster Randomized Trial

PubMed Central

Anderson, Peter; Coulton, Simon; Kaner, Eileen; Bendtsen, Preben; Kłoda, Karolina; Reynolds, Jillian; Segura, Lidia; Wojnar, Marcin; Mierzecki, Artur; Deluca, Paolo; Newbury-Birch, Dorothy; Parkinson, Kathryn; Okulicz-Kozaryn, Katarzyna; Drummond, Colin; Gual, Antoni

2017-01-01

PURPOSE We aimed to test whether 3 strategies—training and support, financial reimbursement, and an option to direct screen-positive patients to an Internet-based method of giving brief advice—have a longer-term effect on primary care clinicians’ delivery of screening and advice to heavy drinkers operationalized with the Alcohol Use Disorders Identification Test–Consumption (AUDIT-C) tool. METHODS We undertook a cluster randomized factorial trial with a 12-week implementation period in 120 primary health care units throughout Catalonia, England, Netherlands, Poland, and Sweden. Units were randomized to 8 groups: care as usual (control); training and support alone; financial reimbursement alone; electronic brief advice alone; paired combinations of these conditions; and all 3 combined. The primary outcome was the proportion of consulting adult patients (aged 18 years and older) receiving intervention—screening and, if screen-positive, advice—at 9 months. RESULTS Based on the factorial design, the ratio of the log of the proportion of patients given intervention at the 9-month follow-up was 1.39 (95% CI, 1.03–1.88) in units that received training and support as compared with units that did not. Neither financial reimbursement nor directing screen-positive patients to electronic brief advice led to a higher proportion of patients receiving intervention. CONCLUSIONS Training and support of primary health care units has a lasting, albeit small, impact on the proportion of adult patients given an alcohol intervention at 9 months. PMID:28694269

Comparative effectiveness of intervention components for producing long-term abstinence from smoking: a factorial screening experiment.

PubMed

Schlam, Tanya R; Fiore, Michael C; Smith, Stevens S; Fraser, David; Bolt, Daniel M; Collins, Linda M; Mermelstein, Robin; Piper, Megan E; Cook, Jessica W; Jorenby, Douglas E; Loh, Wei-Yin; Baker, Timothy B

2016-01-01

To identify promising intervention components that help smokers attain and maintain abstinence during a quit attempt. A 2 × 2 × 2 × 2 × 2 randomized factorial experiment. Eleven primary care clinics in Wisconsin, USA. A total of 544 smokers (59% women, 86% white) recruited during primary care visits and motivated to quit. Five intervention components designed to help smokers attain and maintain abstinence: (1) extended medication (26 versus 8 weeks of nicotine patch + nicotine gum); (2) maintenance (phone) counseling versus none; (3) medication adherence counseling versus none; (4) automated (medication) adherence calls versus none; and (5) electronic medication monitoring with feedback and counseling versus electronic medication monitoring alone. The primary outcome was 7-day self-reported point-prevalence abstinence 1 year after the target quit day. Only extended medication produced a main effect. Twenty-six versus 8 weeks of medication improved point-prevalence abstinence rates (43 versus 34% at 6 months; 34 versus 27% at 1 year; P = 0.01 for both). There were four interaction effects at 1 year, showing that an intervention component's effectiveness depended upon the components with which it was combined. Twenty-six weeks of nicotine patch + nicotine gum (versus 8 weeks) and maintenance counseling provided by phone are promising intervention components for the cessation and maintenance phases of smoking treatment. © 2015 Society for the Study of Addiction.

Technology to Establish a Factory for High QE Alkali Antimonide Photocathodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultheiss, Thomas

2015-11-16

Intense electron beams are key to a large number of scientific endeavors, including electron cooling of hadron beams, electron-positron colliders, secondary-particle beams such as photons and positrons, sub-picosecond ultrafast electron diffraction (UED), and new high gradient accelerators that use electron-driven plasmas. The last decade has seen a considerable interest in pursuit and realization of novel light sources such as Free Electron Lasers [1] and Energy Recovery Linacs [2] that promise to deliver unprecedented quality x-ray beams. Many applications for high-intensity electron beams have arisen in recent years in high-energy physics, nuclear physics and energy sciences, such as recent designs formore » an electron-hadron collider at CERN (LHeC) [3], and beam coolers for hadron beams at LHC and eRHIC [4,5]. Photoinjectors are used at the majority of high-brightness electron linacs today, due to their efficiency, timing structure flexibility and ability to produce high power, high brightness beams. The performance of light source machines is strongly related to the brightness of the electron beam used for generating the x-rays. The brightness of the electron beam itself is mainly limited by the physical processes by which electrons are generated. For laser based photoemission sources this limit is ultimately related to the properties of photocathodes [6]. Most facilities are required to expend significant manpower and money to achieve a workable, albeit often non-ideal, compromise photocathode solution. If entirely fabricated in-house, the photocathode growth process itself is laborious and not always reproducible: it involves the human element while requiring close adherence to recipes and extremely strict control of deposition parameters. Lack of growth reliability and as a consequence, slow adoption of viable photoemitter types, can be partly attributed to the absence of any centralized facility or commercial entity to routinely provide high peak current capable, low emittance, visible-light sensitive photocathodes to the myriad of source systems in use and under development. Successful adoption of photocathodes requires strict adherence to proper fabrication, operation, and maintenance methodologies, necessitating specialized knowledge and skills. Key issues include the choice of photoemitter material, development of a more streamlined growth process to minimize human operator uncertainties, accommodation of varying photoemitter substrate materials and geometries, efficient transport and insertion mechanisms preserving the photo-yield, and properly conveyed photoemitter operational and maintenance methodologies. AES, in collaboration with Cornell University in a Phase I STTR, developed an on-demand industrialized growth and centralized delivery system for high-brightness photocathodes focused upon the alkali antimonide photoemitters. To the end user, future photoemitter sourcing will become as simple as other readily available consumables, rather than a research project requiring large investments in time and personnel.« less

Myc Dynamically and Preferentially Relocates to a Transcription Factory Occupied by Igh

PubMed Central

Osborne, Cameron S; Chakalova, Lyubomira; Mitchell, Jennifer A; Horton, Alice; Wood, Andrew L; Bolland, Daniel J; Corcoran, Anne E; Fraser, Peter

2007-01-01

Transcription in mammalian nuclei is highly compartmentalized in RNA polymerase II-enriched nuclear foci known as transcription factories. Genes in cis and trans can share the same factory, suggesting that genes migrate to preassembled transcription sites. We used fluorescent in situ hybridization to investigate the dynamics of gene association with transcription factories during immediate early (IE) gene induction in mouse B lymphocytes. Here, we show that induction involves rapid gene relocation to transcription factories. Importantly, we find that the Myc proto-oncogene on Chromosome 15 is preferentially recruited to the same transcription factory as the highly transcribed Igh gene located on Chromosome 12. Myc and Igh are the most frequent translocation partners in plasmacytoma and Burkitt lymphoma. Our results show that transcriptional activation of IE genes involves rapid relocation to preassembled transcription factories. Furthermore, the data imply a direct link between the nonrandom interchromosomal organization of transcribed genes at transcription factories and the incidence of specific chromosomal translocations. PMID:17622196

[Dissolution behavior of Fuzi Lizhong pill based on simultaneous determination of two components in Glycyrrhizae Radix et Rhizoma].

PubMed

Jiang, Mao-Yuan; Zhang, Zhen; Shi, Jin-Feng; Zhang, Jin-Ming; Fu, Chao-Mei; Lin, Xia; Liu, Yu-Mei

2018-03-01

To preliminarily investigate the dissolution behavior of Fuzi Lizhong pill, provide the basis for its quality control and lay foundation for in vivo dissolution behavior by determining the dissolution rate of liquiritin and glycyrrhizic acid. High-performance liquid chromatography (HPLC) method for simultaneous content determination of the two active ingredients of liquiritin and glycyrrhizic acid in Fuzi Lizhong pill was established; The dissolution amount of these two active ingredients in fifteen batches of Fuzi Lizhong pill from five manufacturers was obtained at different time points, and then the cumulative dissolution rate was calculated and cumulative dissolution curve was drawn. The similarity of cumulative dissolution curve of different batches was evaluated based on the same factory, and the similarity of cumulative dissolution curve of different factories was evaluated based on the same active ingredients. The dissolution model of Fuzi Lizhong pill based on two kinds of active ingredients was established by fitting with the dissolution data. The best dissolution medium was 0.25% sodium lauryl sulfate. The dissolution behavior of liquiritin and glycyrrhizic acid in Fuzi Lizhong pill was basically the same and sustained release in 48 h. Three batches of the factories (factory 2, factory 3, factory 4 and factory 5) appeared to be similar in dissolution behavior, indicating similarity in dissolution behavior in most factories. Two of the three batches from factory 1 appeared to be not similar in dissolution behavior of liquiritin and glycyrrhizic acid. The dissolution data of the effective ingredients from different factories were same in fitting, and Weibull model was the best model in these batches. Fuzi Lizhong pill in 15 batches from 5 factories showed sustained release in 48 h, proving obviously slow releasing characteristics "pill is lenitive and keeps a long-time efficacy". The generally good dissolution behavior also suggested that quality of different batches from most factories was stable. The dissolution behavior of liquiritin and glycyrrhizic acid in different factories was different, suggesting that the source of medicinal materials and preparation technology parameters in five factories were different. Copyright© by the Chinese Pharmaceutical Association.

Electron beam focusing system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dikansky, N.; Nagaitsev, S.; Parkhomchuk, V.

1997-09-01

The high energy electron cooling requires a very cold electron beam. Thus, the electron beam focusing system is very important for the performance of electron cooling. A system with and without longitudinal magnetic field is presented for discussion. Interaction of electron beam with the vacuum chamber as well as with the background ions and stored antiprotons can cause the coherent electron beam instabilities. Focusing system requirements needed to suppress these instabilities are presented.

AUTOMATING ASSET KNOWLEDGE WITH MTCONNECT.

PubMed

Venkatesh, Sid; Ly, Sidney; Manning, Martin; Michaloski, John; Proctor, Fred

2016-01-01

In order to maximize assets, manufacturers should use real-time knowledge garnered from ongoing and continuous collection and evaluation of factory-floor machine status data. In discrete parts manufacturing, factory machine monitoring has been difficult, due primarily to closed, proprietary automation equipment that make integration difficult. Recently, there has been a push in applying the data acquisition concepts of MTConnect to the real-time acquisition of machine status data. MTConnect is an open, free specification aimed at overcoming the "Islands of Automation" dilemma on the shop floor. With automated asset analysis, manufacturers can improve production to become lean, efficient, and effective. The focus of this paper will be on the deployment of MTConnect to collect real-time machine status to automate asset management. In addition, we will leverage the ISO 22400 standard, which defines an asset and quantifies asset performance metrics. In conjunction with these goals, the deployment of MTConnect in a large aerospace manufacturing facility will be studied with emphasis on asset management and understanding the impact of machine Overall Equipment Effectiveness (OEE) on manufacturing.

Agile manufacturing: The factory of the future

NASA Technical Reports Server (NTRS)

Loibl, Joseph M.; Bossieux, Terry A.

1994-01-01

The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

Modelling of a spread of hazardous substances in a Floreon+ system

NASA Astrophysics Data System (ADS)

Ronovsky, Ales; Brzobohaty, Tomas; Kuchar, Stepan; Vojtek, David

2017-07-01

This paper is focused on a module of an automatized numerical modelling of a spread of hazardous substances developed for the Floreon+ system on demand of the Fire Brigade of Moravian-Silesian. The main purpose of the module is to provide more accurate prediction for smog situations that are frequent problems in the region. It can be operated by non-scientific user through the Floreon+ client and can be used as a short term prediction model of an evolution of concentrations of dangerous substances (SO2, PMx) from stable sources, such as heavy industry factories, local furnaces or highways or as fast prediction of spread of hazardous substances in case of crash of mobile source of contamination (transport of dangerous substances) or in case of a leakage in a local chemical factory. The process of automatic gathering of atmospheric data, connection of Floreon+ system with an HPC infrastructure necessary for computing of such an advantageous model and the model itself are described bellow.

Sequence Factorial and Its Applications

ERIC Educational Resources Information Center

Asiru, Muniru A.

2012-01-01

In this note, we introduce sequence factorial and use this to study generalized M-bonomial coefficients. For the sequence of natural numbers, the twin concepts of sequence factorial and generalized M-bonomial coefficients, respectively, extend the corresponding concepts of factorial of an integer and binomial coefficients. Some latent properties…

Effects of public health interventions on industrial emissions and ambient air in Cartagena, Spain.

PubMed

Cirera, Lluís; Rodríguez, Miguel; Giménez, Joaquín; Jiménez, Enrique; Saez, Marc; Guillén, José-Jesús; Medrano, José; Martínez-Victoria, María-Aurelia; Ballester, Ferran; Moreno-Grau, Stella; Navarro, Carmen

2009-03-01

Ten years of public health interventions on industrial emissions to clean air were monitored for the Mediterranean city of Cartagena. During the 1960s, a number of large chemical and non-ferrous metallurgical factories were established that significantly deteriorated the city's air quality. By the 1970s, the average annual air concentration of sulfur dioxide (SO2) ranged from 200 to 300 microg/m3 (standard conditions units). In 1979, the Spanish government implemented an industrial intervention plan to improve the performance of factories and industrial air pollution surveillance. Unplanned urban development led to residential housing being located adjacent to three major factories. Factory A produced lead, factory B processed zinc from ore concentrates, and factory C produced sulfuric acid and phosphates. This, in combination with the particular abrupt topography and frequent atmospheric thermal inversions, resulted in the worsening of air quality and heightening concern for public health. In 1990, the City Council authorized the immediate intervention at these factories to reduce or shut down production if ambient levels of SO2 or total suspended particles (TSP) exceeded a time-emission threshold in pre-established meteorological contexts. The aim of this research was to assess the appropriateness and effectiveness of the intervention plan implemented from 1992 to 2001 to abate industrial air pollution. The maximum daily 1-h ambient air level of SO2, NO2, and TSP pollutants was selected from one of the three urban automatic stations, designed to monitor ambient air quality around industrial emissions sources. The day on which an intervention took place to reduce and/or interrupt industrial production by factory and pollutant was defined as a control day, and the day after an intervention as a post-control day. To assess the short-term intervention effect on air quality, an ecological time series design was applied, using regression analysis in generalized additive models, focusing on day-to-day variations of ambient air pollutants levels. Two indicators were estimated: (a) appropriateness, the ratio between mean levels of the pollutant for control days versus the other days, and (b) effectiveness, the ratio between mean levels of the pollutant for post-control days versus the other days. Ratios in regression analyses were adjusted for trend, seasonality, temperature, humidity and atmospheric pressure, calendar day, and special events as well as the other pollutants. A total of 702 control days were made on the factories' industrial production during the 10-year period. Fifteen reductions and five shutdown control days took place at factory A for ambient air SO2. At factory B, more controls were carried out for the SO2 pollutant in the years 1992-1993 and 1997. At factory C, the control days for SO2 decreased from 59 reductions and 14 shutdowns to a minimum from 1995 onwards, whereas the controls on TSP were more frequent, reaching a maximum of 99 reductions and 47 shutdowns in the last year. SO2 ambient air mean levels ranged from 456 to 699 microg/m(3) among factories on reduction control days and between 624 and 1,010 microg/m(3) on shutdown days. The TSP ambient air mean levels were 428 and 506 microg/m(3) on reduction and shutdown days, respectively. For all types of control days and factories, a mean ratio of 104% (95% confidence interval [CI] 88 to 121) in SO(2) levels was obtained and a mean ratio of 67% (95% CI 59 to 75) in TSP levels. Post-control days at all factories showed a mean ratio of -16% (95% CI -7 to -24) in SO(2) levels and a mean ratio of -13% (95% CI -7 to -19) in TSP levels. Interventions on industrial production based on the urban SO(2) and TSP ambient air levels were justified by the high concentrations detected. The best assessment of the interventions' effectiveness would have been to utilize the ambient air pollutant concentration readings from the entire time of the production shutdowns or reductions; however, the daily hourly maximum turned out to be a useful indicator because of meteorological factors influencing the diurnal concentration profile. A substantial number of interventions were carried out from 1 to 3 AM: , when vehicular traffic was minimum. On the other hand, atmospheric stability undergoes diurnal cycling in the autumn-winter period due to thermal inversion, which reaches maximum levels around daybreak. Therefore, this increases the ambient air levels and justified the interventions carried out at daybreak in spite of the traffic influence. All the interventions for SO(2) and TSP were carried out when the measured ambient air levels of pollutants were exceeded, which shows the appropriateness of the intervention program. This excess was greater when intervening on SO(2) than on the TSP levels. For both ambient air levels of SO(2) and TSP, significant drops in air pollution were achieved from all three factories following activity reductions. The production shutdown controls were very effective, because they returned excess levels, higher than in the reduction controls, to everyday mean values. The Cartagena City observational system of intermittent control has proven to effectively reduce industrial emissions' impact on ambient air quality. This experienced model approach could serve well in highly polluted industrial settings. From a public health perspective, studies are needed to assess that the industrial interventions to control air pollution were related to healthier human populations. Legislation was needed to allow the public administration to take direct actions upon the polluting industries.

Investigation of cadmium pollution in the spruce saplings near the metal production factory.

PubMed

Hashemi, Seyed Armin; Farajpour, Ghasem

2016-02-01

Toxic metals such as lead and cadmium are among the pollutants that are created by the metal production factories and disseminated in the nature. In order to study the quantity of cadmium pollution in the environment of the metal production factories, 50 saplings of the spruce species at the peripheries of the metal production factories were examined and the samples of the leaves, roots, and stems of saplings planted around the factory and the soil of the environment of the factory were studied to investigate pollution with cadmium. They were compared to the soil and saplings of the spruce trees planted outside the factory as observer region. The results showed that the quantity of pollution in the leaves, stems, and roots of the trees planted inside the factory environment were estimated at 1.1, 1.5, and 2.5 mg/kg, respectively, and this indicated a significant difference with the observer region (p < 0.05). The quantity of cadmium in the soil of the peripheries of the metal production factory was estimated at 6.8 mg/kg in the depth of 0-10 cm beneath the level of the soil. The length of roots in the saplings planted around the factory of metal production stood at 11 and 14.5 cm in the observer region which had a significant difference with the observer region (p < 0.05). The quantity of soil resources and spruce species' pollution with cadmium in the region has been influenced by the production processes in the factory. © The Author(s) 2013.

Testing Factorial Invariance in Multilevel Data: A Monte Carlo Study

ERIC Educational Resources Information Center

Kim, Eun Sook; Kwok, Oi-man; Yoon, Myeongsun

2012-01-01

Testing factorial invariance has recently gained more attention in different social science disciplines. Nevertheless, when examining factorial invariance, it is generally assumed that the observations are independent of each other, which might not be always true. In this study, we examined the impact of testing factorial invariance in multilevel…

Incorporation of bentonite clay in cassava starch films for the reduction of water vapor permeability.

PubMed

Monteiro, M K S; Oliveira, V R L; Santos, F K G; Barros Neto, E L; Leite, R H L; Aroucha, E M M; Silva, R R; Silva, K N O

2018-03-01

Complete factorial planning 2 3 was applied to identify the influence of the cassava starch(A), glycerol(B) and modified clay(C) content on the water vapor permeability(WVP) of the cassava starch films with the addition of bentonite clay as a filler, its surface was modified by ion exchange from cetyltrimethyl ammonium bromide. The films were characterized by X-ray diffraction(XRD), fourier transform by infrared radiation(FTIR), atomic force microscopy(AFM) and scanning electron microscopy(SEM). The factorial analysis suggested a mathematical model thats predicting the optimal condition of the minimization of WVP. The influence of each individual factor and interaction in the WVP was investigated by Pareto graph, response surface and the optimization was established by the desirability function. The sequence of the degree of statistical significance of the investigated effects on the WVP observed in the Pareto graph was C>B>A>BC>AC. Interactions AB, BC and AC showed that the modified clay was the factor of greater significance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Concentrations and characteristics of amphibole fibres in the lungs of workers exposed to crocidolite in the British gas-mask factories, and elsewhere, during the second world war.

PubMed

Morgan, A; Holmes, A

1982-02-01

Concentrations and length distributions of uncoated and coated amphibole fibres in the lungs of 27 workers at the Leyland, Nottingham, and Blackburn gas-mask factories were measured after death with the light microscope using the membrane filter technique. Measurements were also made on a worker exposed to crocidolite at the Chemical Defence Experimental Establishment, Porton, and on three miners from the Wittenoom mine in Western Australia where the crocidolite used in the manufacture of military respirators is reputed to have originated. In selected cases, fibre concentrations and dimensions were also measured with the electron microscope. All but two subjects died with a mesothelial tumour. Fibre concentrations ranged from 7 x 10(4) to almost 10(9) fibres/g dry weight. There appeared to be no relation between latent period and fibre concentration. The significance of the wide range of fibre concentrations which was associated with the development of mesothelial tumours is discussed and also the relation between the relative frequency and dimensions of uncoated and coated fibres.

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach

PubMed Central

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Context: Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. Aims: This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Materials and Methods: Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts’ deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Statistical Analysis Used: Non-parametric tests and AHP approach using Expert Choice software. Results: The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution “controlling and improving the process in handling users complaints” is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Conclusions: Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to “services interaction.” As the results showed having “controlling and improving the process in handling users complaints” on the website is the first and most important one and the process of “changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula” is the least important one. PMID:25540790

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach.

PubMed

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts' deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Non-parametric tests and AHP approach using Expert Choice software. The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution "controlling and improving the process in handling users complaints" is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to "services interaction." As the results showed having "controlling and improving the process in handling users complaints" on the website is the first and most important one and the process of "changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula" is the least important one.

From gene to structure: The protein factory of the NBICS Centre of Kurchatov Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyko, K. M.; Lipkin, A. V.; Popov, V. O., E-mail: vpopov@inbi.ras.ru

2013-05-15

The Protein Factory was established at the Centre for Nano, Bio, Info, Cognitive, and Social Sciences and Technologies (NBICS Centre) of the National Research Centre 'Kurchatov Institute' in 2010. The Protein Factory, together with the Centre for Synchrotron Radiation and Nanotechnology, promote research on structural biology. This paper presents the technology platforms developed at the Protein Factory and the facilities available for researchers. The main projects currently being performed at the Protein Factory are briefly described.

An Analysis of Factors Related to Retirement Intentions of Upper Level Civil Service Employees in the Air Force.

DTIC Science & Technology

1986-09-01

workforce that is incapable of performing organizational objectives (Humple and Lyons , 1983; Tucker, 1985). . Research into retirement within the federal...organization (Donnelly, Gibson, Ivancevich ; 1984). The present study focuses on civilian middle managers, GM13 to GMI5, within technical career fields...Masson, Demestree, and Lyon ; 1979). The second study performed a factorial analysis on data from 457 respondents between the ages of 25 to 64 that worked

Rethinking policy perspectives on childhood stunting: time to formulate a structural and multifactorial strategy

PubMed Central

Mejía‐Guevara, Iván; Krishna, Aditi

2016-01-01

Abstract Stunting and chronic undernutrition among children in South Asia remain a major unresolved global health issue. There are compelling intrinsic and moral reasons to ensure that children attain their optimal growth potential facilitated via promotion of healthy living conditions. Investments in efforts to ensure that children's growth is not faltered also have substantial instrumental benefits in terms of cognitive and economic development. Using the case of India, we critique three prevailing approaches to reducing undernutrition among children: an over‐reliance on macroeconomic growth as a potent policy instrument, a disproportionate focus on interpreting undernutrition as a demand‐side problem and an over‐reliance on unintegrated single‐factorial (one at a time) approaches to policy and research. Using existing evidence, we develop a case for support‐led policy approach with a focus on integrated and structural factors to addressing the problem of undernutrition among children in India. Key messages Eliminating child undernutrition is important from an intrinsic perspective and offers considerable instrumental benefits to individual and society.Evidence suggests that an exclusive reliance on a growth‐mediated strategy to eliminate stunting needs to be reconsidered, suggesting the need for a substantial support‐led strategy.Interpreting and addressing undernutrition as a demand‐side problem with proximal single‐factorial interventions is futile.There is an urgent need to develop interventions that address the broader structural and upstream causes of child undernutrition. PMID:27187918

Approaching the socialist factory and its workforce: considerations from fieldwork in (former) Yugoslavia

PubMed Central

Archer, Rory; Musić, Goran

2017-01-01

Abstract The socialist factory, as the ‘incubator’ of the new socialist (wo)man, is a productive entry point for the study of socialist modernization and its contradictions. By outlining some theoretical and methodological insights gathered through field-research in factories in former Yugoslavia, we seek to connect the state of labour history in the Balkans to recent breakthroughs made by labour historians of other socialist countries. The first part of this article sketches some of the specificities of the Yugoslav self-managed factory and its heterogeneous workforce. It presents the ambiguous relationship between workers and the factory and demonstrates the variety of life trajectories for workers in Yugoslav state-socialism (from model communists to alienated workers). The second part engages with the available sources for conducting research inside and outside the factory advocating an approach which combines factory and local archives, print media and oral history. PMID:28190894

Approaching the socialist factory and its workforce: considerations from fieldwork in (former) Yugoslavia.

PubMed

Archer, Rory; Musić, Goran

2017-01-01

The socialist factory, as the 'incubator' of the new socialist (wo)man, is a productive entry point for the study of socialist modernization and its contradictions. By outlining some theoretical and methodological insights gathered through field-research in factories in former Yugoslavia, we seek to connect the state of labour history in the Balkans to recent breakthroughs made by labour historians of other socialist countries. The first part of this article sketches some of the specificities of the Yugoslav self-managed factory and its heterogeneous workforce. It presents the ambiguous relationship between workers and the factory and demonstrates the variety of life trajectories for workers in Yugoslav state-socialism (from model communists to alienated workers). The second part engages with the available sources for conducting research inside and outside the factory advocating an approach which combines factory and local archives, print media and oral history.

Compact electron beam focusing column

NASA Astrophysics Data System (ADS)

Persaud, Arun; Leung, Ka-Ngo; Reijonen, Jani

2001-12-01

A novel design for an electron beam focusing column has been developed at LBNL. The design is based on a low-energy spread multicusp plasma source which is used as a cathode for electron beam production. The focusing column is 10 mm in length. The electron beam is focused by means of electrostatic fields. The column is designed for a maximum voltage of 50 kV. Simulations of the electron trajectories have been performed by using the 2D simulation code IGUN and EGUN. The electron temperature has also been incorporated into the simulations. The electron beam simulations, column design and fabrication will be discussed in this presentation.

Impact of psychosocial factors on the prevalence of headaches in the industrial setting. A case-control approach.

PubMed

Tobiasz-Adamczyk, B; Flak, E; Jedrychowski, W A

1985-01-01

A sociomedical survey of 975 workers employed in an electronic instrument factory was carried out by standardized interview and aimed at defining the relationship between some psychosocial working conditions and the occurrence of headaches. The findings showed different patterns of headaches in specific occupational categories with workers exposed to different psychosocial stresses. Headaches were more frequent in those who became nervous during their work, those who were often in conflict with their co-workers, and those holding managerial posts.

Progress on BN and Doped-BN Coatings on Woven Fabrics

NASA Technical Reports Server (NTRS)

Hurwitz, Frances I.; Scott, John M.; Chayka, Paul V.

2001-01-01

A novel, multistep process for applying interface coatings to woven structures using a pulsed CVD process is being evaluated. Borazine (B3N3H6), a neat liquid, and several Si precursors are used in the process to produce BN and SiBN coatings on Hi- Nicalon fabrics and preforms. A three variable, two level, full factorial matrix is proposed to define the influence of processing parameters. Coating morphology, uniformity and chemistry are characterized by field emission scanning electron microscopy (FESEM), energy dispersive (EDS) and Auger spectroscopies.

PML nuclear bodies: regulation, function and therapeutic perspectives.

PubMed

Sahin, Umut; Lallemand-Breitenbach, Valérie; de Thé, Hugues

2014-11-01

PML nuclear bodies (NBs) were first described by electron microscopy and rediscovered through their treatment-reversible disruption in a rare leukaemia. They recruit multiple partner proteins and now emerge as interferon- and oxidative stress-responsive sumoylation factories. NBs mediate interferon-induced viral restriction, enhance proteolysis, finely tune metabolism and enforce stress-induced senescence. Apart from being markers of cellular stress, PML NBs could be harnessed pharmacologically in a number of conditions, including cancer, viral infection or neurodegenerative diseases. Copyright © 2014 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

Electron microscope aperture system

NASA Technical Reports Server (NTRS)

Heinemann, K. (Inventor)

1976-01-01

An electron microscope including an electron source, a condenser lens having either a circular aperture for focusing a solid cone of electrons onto a specimen or an annular aperture for focusing a hollow cone of electrons onto the specimen, and an objective lens having an annular objective aperture, for focusing electrons passing through the specimen onto an image plane are described. The invention also entails a method of making the annular objective aperture using electron imaging, electrolytic deposition and ion etching techniques.

The Virtual Factory Teaching System (VFTS): Project Review and Results.

ERIC Educational Resources Information Center

Kazlauskas, E. J.; Boyd, E. F., III; Dessouky, M. M.

This paper presents a review of the Virtual Factory Teaching (VFTS) project, a Web-based, multimedia collaborative learning network. The system allows students, working alone or in teams, to build factories, forecast demand for products, plan production, establish release rules for new work into the factory, and set scheduling rules for…

Sequence Factorial of "g"-Gonal Numbers

ERIC Educational Resources Information Center

Asiru, Muniru A.

2013-01-01

The gamma function, which has the property to interpolate the factorial whenever the argument is an integer, is a special case (the case "g"?=?2) of the general term of the sequence factorial of "g"-gonal numbers. In relation to this special case, a formula for calculating the general term of the sequence factorial of any…

A survey of airborne and skin exposures to chemicals in footwear and equipment factories in Thailand.

PubMed

Todd, Lori A; Mottus, Kathleen; Mihlan, Gary J

2008-03-01

This research reports on a pilot industrial hygiene study that was performed at four footwear factories and two equipment factories in Thailand. Workers in these factories were exposed through inhalation and dermal contact to a large number of organic vapors from solvents and cements that were hand applied. In addition, these workers were exposed to highly toxic isocyanates primarily through the dermal route. A total of 286 personal air samples were obtained at the four footwear factories using organic vapor monitors; individual job tasks were monitored using a real-time MIRAN Spectrometer. A total of 64 surface, tool, or hand samples were monitored for isocyanates using surface contamination detectors. Real-time measurements were also obtained for organic vapors in two equipment factories. From 8% to 21% of the workers sampled in each footwear factory were overexposed to mixtures of chemicals from solvents and cements. Up to 100% of the workers performing specific job tasks were overexposed to mixtures of chemicals. From 39% to 69% of the surface samples were positive for unreacted isocyanates. Many of the real-time measurements obtained in the equipment factories exceeded occupational exposure limits. Personal protective equipment and engineering controls were inadequate in all of the factories.

The Walking Interventions Through Texting (WalkIT) Trial: Rationale, Design, and Protocol for a Factorial Randomized Controlled Trial of Adaptive Interventions for Overweight and Obese, Inactive Adults

PubMed Central

Hurley, Jane C; Hollingshead, Kevin E; Todd, Michael; Jarrett, Catherine L; Tucker, Wesley J; Angadi, Siddhartha S

2015-01-01

Background Walking is a widely accepted and frequently targeted health promotion approach to increase physical activity (PA). Interventions to increase PA have produced only small improvements. Stronger and more potent behavioral intervention components are needed to increase time spent in PA, improve cardiometabolic risk markers, and optimize health. Objective Our aim is to present the rationale and methods from the WalkIT Trial, a 4-month factorial randomized controlled trial (RCT) in inactive, overweight/obese adults. The main purpose of the study was to evaluate whether intensive adaptive components result in greater improvements to adults’ PA compared to the static intervention components. Methods Participants enrolled in a 2x2 factorial RCT and were assigned to one of four semi-automated, text message–based walking interventions. Experimental components included adaptive versus static steps/day goals, and immediate versus delayed reinforcement. Principles of percentile shaping and behavioral economics were used to operationalize experimental components. A Fitbit Zip measured the main outcome: participants’ daily physical activity (steps and cadence) over the 4-month duration of the study. Secondary outcomes included self-reported PA, psychosocial outcomes, aerobic fitness, and cardiorespiratory risk factors assessed pre/post in a laboratory setting. Participants were recruited through email listservs and websites affiliated with the university campus, community businesses and local government, social groups, and social media advertising. Results This study has completed data collection as of December 2014, but data cleaning and preliminary analyses are still in progress. We expect to complete analysis of the main outcomes in late 2015 to early 2016. Conclusions The Walking Interventions through Texting (WalkIT) Trial will further the understanding of theory-based intervention components to increase the PA of men and women who are healthy, insufficiently active and are overweight or obese. WalkIT is one of the first studies focusing on the individual components of combined goal setting and reward structures in a factorial design to increase walking. The trial is expected to produce results useful to future research interventions and perhaps industry initiatives, primarily focused on mHealth, goal setting, and those looking to promote behavior change through performance-based incentives. Trial Registration ClinicalTrials.gov NCT02053259; https://clinicaltrials.gov/ct2/show/NCT02053259 (Archived by WebCite at http://www.webcitation.org/6b65xLvmg). PMID:26362511

Does open-air exposure to volatile organic compounds near a plastic recycling factory cause health effects?

PubMed

Yorifuji, Takashi; Noguchi, Miyuki; Tsuda, Toshihide; Suzuki, Etsuji; Takao, Soshi; Kashima, Saori; Yanagisawa, Yukio

2012-01-01

After a plastic reprocessing factory began to operate in August 2004, the residents around the factory in Neyagawa, Osaka, Japan, began to complain of symptoms. Therefore, we conducted an exposure assessment and a population-based epidemiological study in 2006. To assess exposure, volatile organic compounds (VOCs) and total VOCs were measured at two locations in the vicinity of the factory. In the population-based study, a total of 3,950 residents were targeted. A self-administered questionnaire was used to collect information about subjects' mucocutaneous or respiratory symptoms. Using logistic regression models, we compared the prevalence of symptoms in July 2006 by employing the farthest area from the factory as a reference, and prevalence odds ratios (PORs) and their 95% confidence intervals (CIs) were estimated. The concentration of total VOCs was higher in the vicinity of the factory. The prevalence of mucocutaneous and respiratory symptoms was the highest among the residents in the closest area to the factory. Some symptoms were significantly increased among the residents within 500 m of the factory compared with residents of an area 2800 m from the factory: e.g., sore throat (POR=3.2, 95% CI: 1.3-8.0), eye itch (POR=3.0, 95% CI: 1.5-6.0), eye discharge (POR=6.0, 95% CI: 2.3-15.9), eczema (POR=3.0, 95% CI: 1.1-7.9) and sputum (POR=2.4, 95% CI: 1.1-5.1). Despite of the limitations of this study, these results imply a possible association of open-air VOCs with mucocutaneous and respiratory symptoms. Because this kind of plasticre cycling factory only recently came into operation, more attention should be paid to the operation of plastic recycling factories in the environment.

Efficiency in Complexity: Composition and Dynamic Nature of Mimivirus Replication Factories

PubMed Central

Milrot, Elad; Mutsafi, Yael; Ben-Dor, Shifra; Levin, Yishai; Savidor, Alon; Kartvelishvily, Elena

2016-01-01

ABSTRACT The recent discovery of multiple giant double-stranded DNA (dsDNA) viruses blurred the consensual distinction between viruses and cells due to their size, as well as to their structural and genetic complexity. A dramatic feature revealed by these viruses as well as by many positive-strand RNA viruses is their ability to rapidly form elaborate intracellular organelles, termed “viral factories,” where viral progeny are continuously generated. Here we report the first isolation of viral factories at progressive postinfection time points. The isolated factories were subjected to mass spectrometry-based proteomics, bioinformatics, and imaging analyses. These analyses revealed that numerous viral proteins are present in the factories but not in mature virions, thus implying that multiple and diverse proteins are required to promote the efficiency of viral factories as “production lines” of viral progeny. Moreover, our results highlight the dynamic and highly complex nature of viral factories, provide new and general insights into viral infection, and substantiate the intriguing notion that viral factories may represent the living state of viruses. IMPORTANCE Large dsDNA viruses such as vaccinia virus and the giant mimivirus, as well as many positive-strand RNA viruses, generate elaborate cytoplasmic organelles in which the multiple and diverse transactions required for viral replication and assembly occur. These organelles, which were termed “viral factories,” are attracting much interest due to the increasing realization that the rapid and continuous production of viral progeny is a direct outcome of the elaborate structure and composition of the factories, which act as efficient production lines. To get new insights into the nature and function of viral factories, we devised a method that allows, for the first time, the isolation of these organelles. Analyses of the isolated factories generated at different times postinfection by mass spectrometry-based proteomics provide new perceptions of their role and reveal the highly dynamic nature of these organelles. PMID:27581975

Pressurized rf cavities in ionizing beams

DOE PAGES

Freemire, B.; Tollestrup, A.  V.; Yonehara, K.; ...

2016-06-20

A muon collider or Higgs factory requires significant reduction of the six dimensional emittance of the beam prior to acceleration. One method to accomplish this involves building a cooling channel using high pressure gas filled radio frequency cavities. The performance of such a cavity when subjected to an intense particle beam must be investigated before this technology can be validated. To this end, a high pressure gas filled radio frequency (rf) test cell was built and placed in a 400 MeV beam line from the Fermilab linac to study the plasma evolution and its effect on the cavity. Hydrogen, deuterium, helium and nitrogen gases were studied. Additionally, sulfur hexafluoride and dry air were used as dopants to aid in the removal of plasma electrons. Measurements were made using a variety of beam intensities, gas pressures, dopant concentrations, and cavity rf electric fields, both with and without a 3 T external solenoidal magnetic field. In conclusion, energy dissipation per electron-ion pair, electron-ion recombination rates, ion-ion recombination rates, and electron attachment times to SFmore » $$_6$$ and O$$_2$$ were measured.« less

Method of forming aperture plate for electron microscope

NASA Technical Reports Server (NTRS)

Heinemann, K. (Inventor)

1974-01-01

An electron microscope is described with an electron source a condenser lens having either a circular aperture for focusing a solid cone of electrons onto a specimen or an annular aperture for focusing a hollow cone of electrons onto the specimen. It also has objective lens with an annular objective aperture, for focusing electrons passing through the specimen onto an image plane. A method of making the annular objective aperture using electron imaging, electrolytic deposition and ion etching techniques is included.

76 FR 77175 - New York Fun Factory Fireworks Display, Western Long Island Sound; Mamaroneck, NY

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-12

...-AA00 New York Fun Factory Fireworks Display, Western Long Island Sound; Mamaroneck, NY AGENCY: Coast... in support of the New York Fun Factory Fireworks display. This action is necessary to provide for the... the Coast Guard to define regulatory safety zones. On May 10, 2012 New York Fun Factory Events is...

Synthesis and acid digestion of biomorphic ceramics: determination of alkaline and alkaline earth ions.

PubMed

Bosch Ojeda, Catalina; Sánchez Rojas, Fuensanta; Cano Pavón, José Manuel

2007-09-01

Ceramic and glass are some of the more recent engineering materials and those that are most resistant to environmental conditions. They belong to advanced materials in that they are being developed for the aerospace and electronics industries. In the last decade, a new class of ceramic materials has been the focus of particular attention. The materials were produced with natural, renewable resources (wood or wood-based products). In this work, we have synthesised a new biomorphic ceramic material from oak wood and Si infiltration. After the material characterization, we have optimized the dissolution of the sample by acid attack in an oven under microwave irradiation. Experimental designs were used as a multivariate strategy for the evaluation of the effects of varying several variables at the same time. The optimization was performed in two steps using factorial design for preliminary evaluation and a Draper-Lin design for determination of the critical experimental conditions. Five variables (time, power, volume of HNO3, volume H2SO4 and volume of HF) were considered as factors and as a response the concentration of different metal ions in the optimization process. Interactions between analytical factors and their optimal levels were investigated using a Draper-Lin design.

Automated image processing and analysis of cartilage MRI: enabling technology for data mining applied to osteoarthritis

PubMed Central

Tameem, Hussain Z.; Sinha, Usha S.

2011-01-01

Osteoarthritis (OA) is a heterogeneous and multi-factorial disease characterized by the progressive loss of articular cartilage. Magnetic Resonance Imaging has been established as an accurate technique to assess cartilage damage through both cartilage morphology (volume and thickness) and cartilage water mobility (Spin-lattice relaxation, T2). The Osteoarthritis Initiative, OAI, is a large scale serial assessment of subjects at different stages of OA including those with pre-clinical symptoms. The electronic availability of the comprehensive data collected as part of the initiative provides an unprecedented opportunity to discover new relationships in complex diseases such as OA. However, imaging data, which provides the most accurate non-invasive assessment of OA, is not directly amenable for data mining. Changes in morphometry and relaxivity with OA disease are both complex and subtle, making manual methods extremely difficult. This chapter focuses on the image analysis techniques to automatically localize the differences in morphometry and relaxivity changes in different population sub-groups (normal and OA subjects segregated by age, gender, and race). The image analysis infrastructure will enable automatic extraction of cartilage features at the voxel level; the ultimate goal is to integrate this infrastructure to discover relationships between the image findings and other clinical features. PMID:21785520

Trans-African Hydro-Meteorological Observatory

NASA Astrophysics Data System (ADS)

van de Giesen, N.; Andreini, M.; Selker, J.

2009-04-01

Our computing capacity to model hydrological processes is such that we can readily model every hectare of the globe's surface in real time. Satellites provide us with important state observations that allow us to calibrate our models and estimate model errors. Still, ground observations will remain necessary to obtain data that can not readily be observed from space. Hydro-Meteorological data availability is particularly scarce in Africa. This presentation launches a simple idea by which Africa can leapfrog into a new era of closely knit environmental observation networks. The basic idea is the design of a robust measurement station, based on the smart use of new sensors without moving parts. For example, instead of using a Eu 5000 long-wave pyrgeometer, a factory calibrated IR microwave oven sensor is used that costs less than Eu 10. In total, each station should cost Eu 200 or less. Every 30 km, one station will be installed, being equivalent to 20,000 stations for all of sub-Saharan Africa. The roll-out will follow the XO project ("100 computer") and focus on high schools. The stations will be accompanied by an educational package that allows high school children to learn about their environment, measurements, electronics, and mathematical modeling. Total program costs lie around MEu 18.

Automated image processing and analysis of cartilage MRI: enabling technology for data mining applied to osteoarthritis

NASA Astrophysics Data System (ADS)

Tameem, Hussain Z.; Sinha, Usha S.

2007-11-01

Osteoarthritis (OA) is a heterogeneous and multi-factorial disease characterized by the progressive loss of articular cartilage. Magnetic Resonance Imaging has been established as an accurate technique to assess cartilage damage through both cartilage morphology (volume and thickness) and cartilage water mobility (Spin-lattice relaxation, T2). The Osteoarthritis Initiative, OAI, is a large scale serial assessment of subjects at different stages of OA including those with pre-clinical symptoms. The electronic availability of the comprehensive data collected as part of the initiative provides an unprecedented opportunity to discover new relationships in complex diseases such as OA. However, imaging data, which provides the most accurate non-invasive assessment of OA, is not directly amenable for data mining. Changes in morphometry and relaxivity with OA disease are both complex and subtle, making manual methods extremely difficult. This chapter focuses on the image analysis techniques to automatically localize the differences in morphometry and relaxivity changes in different population sub-groups (normal and OA subjects segregated by age, gender, and race). The image analysis infrastructure will enable automatic extraction of cartilage features at the voxel level; the ultimate goal is to integrate this infrastructure to discover relationships between the image findings and other clinical features.

Effect of the diffusion parameters on the observed γ-ray spectrum of sources and their contribution to the local all-electron spectrum: The EDGE code

NASA Astrophysics Data System (ADS)

López-Coto, R.; Hahn, J.; BenZvi, S.; Dingus, B.; Hinton, J.; Nisa, M. U.; Parsons, R. D.; Greus, F. Salesa; Zhang, H.; Zhou, H.

2018-11-01

The positron excess measured by PAMELA and AMS can only be explained if there is one or several sources injecting them. Moreover, at the highest energies, it requires the presence of nearby ( ∼ hundreds of parsecs) and middle age (maximum of ∼ hundreds of kyr) sources. Pulsars, as factories of electrons and positrons, are one of the proposed candidates to explain the origin of this excess. To calculate the contribution of these sources to the electron and positron flux at the Earth, we developed EDGE (Electron Diffusion and Gamma rays to the Earth), a code to treat the propagation of electrons and compute their diffusion from a central source with a flexible injection spectrum. Using this code, we can derive the source's gamma-ray spectrum, spatial extension, the all-electron density in space, the electron and positron flux reaching the Earth and the positron fraction measured at the Earth. We present in this paper the foundations of the code and study how different parameters affect the gamma-ray spectrum of a source and the electron flux measured at the Earth. We also studied the effect of several approximations usually performed in these studies. This code has been used to derive the results of the positron flux measured at the Earth in [1].

Diagenetic pathways in deposits of cool- and cold-water carbonate factories

NASA Astrophysics Data System (ADS)

Frank, T. D.; James, N. P.

2017-12-01

This investigation integrates sedimentological, petrographic, and geochemical observations from modern and ancient heterozoan carbonate deposits that formed at temperate to polar latitudes with the aim of evaluating diagenetic pathways characteristic of these systems. These factories operate under conditions distinct from those of photozoan counterparts. Lower temperatures, higher trophic resources, lower carbonate saturation states, and strong seasonality govern not only the nature of carbonate communities, but also how deposits translate into the rock record. In these settings, carbonate production is entirely biogenic, assemblages are of low diversity, and there are no significant calcareous phototrophs. Aragonitic taxa may be present in living communities, but allochems rapidly disappear via dissolution. Carbonate producers are not capable of building rigid frameworks, so their deposits accumulate as sands and gravels and are prone to winnowing and reworking. Low production rates lead to long seafloor residence times (1000s of years) for grains, which undergo physical reworking, dissolution, and repeated infestation by endolithic borers. Microborings remain empty, increasing grain susceptibility to disintegration. Intergranular cementation on the seafloor is rare and restricted to hardgrounds. Periods of subaerial exposure do not leave traces of meteoric alteration. Results show that the deposits of heterozoan carbonate factories tend enter the geologic record as taphonomic remnants, namely reworked, unconsolidated sands and gravels with low diagenetic potential. During burial, physical and chemical compaction produce limestones with tightly packed, grain-supported fabrics, often with grains in sutured contact. Significant cementation is associated with the deep burial realm. Results reveal a dramatically different diagenetic pathway than is typical for deposits of tropical photozoan factories, in which significant recrystallization and lithification occur on the seafloor and upon subaerial exposure. Interpretations of ancient deposits should take into account the potential for taphonomic loss of aragonitic allochems, modification of depositional textures via reworking and compaction, and grain alteration and cementation focused in the burial environment.

Review of sample preparation strategies for MS-based metabolomic studies in industrial biotechnology.

PubMed

Causon, Tim J; Hann, Stephan

2016-09-28

Fermentation and cell culture biotechnology in the form of so-called "cell factories" now play an increasingly significant role in production of both large (e.g. proteins, biopharmaceuticals) and small organic molecules for a wide variety of applications. However, associated metabolic engineering optimisation processes relying on genetic modification of organisms used in cell factories, or alteration of production conditions remain a challenging undertaking for improving the final yield and quality of cell factory products. In addition to genomic, transcriptomic and proteomic workflows, analytical metabolomics continues to play a critical role in studying detailed aspects of critical pathways (e.g. via targeted quantification of metabolites), identification of biosynthetic intermediates, and also for phenotype differentiation and the elucidation of previously unknown pathways (e.g. via non-targeted strategies). However, the diversity of primary and secondary metabolites and the broad concentration ranges encompassed during typical biotechnological processes means that simultaneous extraction and robust analytical determination of all parts of interest of the metabolome is effectively impossible. As the integration of metabolome data with transcriptome and proteome data is an essential goal of both targeted and non-targeted methods addressing production optimisation goals, additional sample preparation steps beyond necessary sampling, quenching and extraction protocols including clean-up, analyte enrichment, and derivatisation are important considerations for some classes of metabolites, especially those present in low concentrations or exhibiting poor stability. This contribution critically assesses the potential of current sample preparation strategies applied in metabolomic studies of industrially-relevant cell factory organisms using mass spectrometry-based platforms primarily coupled to liquid-phase sample introduction (i.e. flow injection, liquid chromatography, or capillary electrophoresis). Particular focus is placed on the selectivity and degree of enrichment attainable, as well as demands of speed, absolute quantification, robustness and, ultimately, consideration of fully-integrated bioanalytical solutions to optimise sample handling and throughput. Copyright © 2016 Elsevier B.V. All rights reserved.

A factorial design experiment as a pilot study for noninvasive genetic sampling.

PubMed

Renan, Sharon; Speyer, Edith; Shahar, Naama; Gueta, Tomer; Templeton, Alan R; Bar-David, Shirli

2012-11-01

Noninvasive genetic sampling has increasingly been used in ecological and conservation studies during the last decade. A major part of the noninvasive genetic literature is dedicated to the search for optimal protocols, by comparing different methods of collection, preservation and extraction of DNA from noninvasive materials. However, the lack of quantitative comparisons among these studies and the possibility that different methods are optimal for different systems make it difficult to decide which protocol to use. Moreover, most studies that have compared different methods focused on a single factor - collection, preservation or extraction - while there could be interactions between these factors. We designed a factorial experiment, as a pilot study, aimed at exploring the effect of several collection, preservation and extraction methods, and the interactions between them, on the quality and amplification success of DNA obtained from Asiatic wild ass (Equus hemionus) faeces in Israel. The amplification success rates of one mitochondrial DNA and four microsatellite markers differed substantially as a function of collection, preservation and extraction methods and their interactions. The most efficient combination for our system integrated the use of swabs as a collection method with preservation at -20 °C and with the Qiagen DNA Stool Kit with modifications as the DNA extraction method. The significant interaction found between the collection, preservation methods and the extraction methods reinforces the importance of conducting a factorial design experiment, rather than examining each factor separately, as a pilot study before initiating a full-scale noninvasive research project. © 2012 Blackwell Publishing Ltd.

Lepton identification at particle flow oriented detector for the future e+e- Higgs factories

NASA Astrophysics Data System (ADS)

Yu, Dan; Ruan, Manqi; Boudry, Vincent; Videau, Henri

2017-09-01

The lepton identification is essential for the physics programs at high-energy frontier, especially for the precise measurement of the Higgs boson. For this purpose, a toolkit for multivariate data analysis (TMVA) based lepton identification (LICH) has been developed for detectors using high granularity calorimeters. Using the conceptual detector geometry for the Circular Electron-Positron Collider (CEPC) and single charged particle samples with energy larger than 2 GeV, LICH identifies electrons/muons with efficiencies higher than 99.5% and controls the mis-identification rate of hadron to muons/electrons to better than 1/0.5%. Reducing the calorimeter granularity by 1-2 orders of magnitude, the lepton identification performance is stable for particles with E > 2 GeV. Applied to fully simulated eeH/μ μ H events, the lepton identification performance is consistent with the single particle case: the efficiency of identifying all the high energy leptons in an event, is 95.5-98.5%.

Marshak Lectureship: The Turkish Accelerator Center, TAC

NASA Astrophysics Data System (ADS)

Yavas, Omer

2012-02-01

The Turkish Accelerator Center (TAC) project is comprised of five different electron and proton accelerator complexes, to be built over 15 years, with a phased approach. The Turkish Government funds the project. Currently there are 23 Universities in Turkey associated with the TAC project. The current funded project, which is to run until 2013 aims *To establish a superconducting linac based infra-red free electron laser and Bremsstrahlung Facility (TARLA) at the Golbasi Campus of Ankara University, *To establish the Institute of Accelerator Technologies in Ankara University, and *To complete the Technical Design Report of TAC. The proposed facilities are a 3^rd generation Synchrotron Radiation facility, SASE-FEL facility, a GeV scale Proton Accelerator facility and an electron-positron collider as a super charm factory. In this talk, an overview on the general status and road map of TAC project will be given. National and regional importance of TAC will be expressed and the structure of national and internatonal collaborations will be explained.

DEPFET detectors for future electron-positron colliders

NASA Astrophysics Data System (ADS)

Marinas, C.

2015-11-01

The DEPFET Collaboration develops highly granular, ultra-thin pixel detectors for outstanding vertex reconstruction at future electron-positron collider experiments. A DEPFET sensor, by the integration of a field effect transistor on a fully depleted silicon bulk, provides simultaneous position sensitive detector capabilities and in pixel amplification. The characterization of the latest DEPFET prototypes has proven that a adequate signal-to-noise ratio and excellent single point resolution can be achieved for a sensor thickness of 50 micrometers. The close to final auxiliary ASICs have been produced and found to operate a DEPFET pixel detector of the latest generation with the required read-out speed. A complete detector concept is being developed for the Belle II experiment at the new Japanese super flavor factory. DEPFET is not only the technology of choice for the Belle II vertex detector, but also a prime candidate for the ILC. Therefore, in this contribution, the status of DEPFET R&D project is reviewed in the light of the requirements of the vertex detector at a future electron-positron collider.

Utilzing Networked Computer Workstations To Conduct Electronic Focus Groups.

ERIC Educational Resources Information Center

Lowery, Catherine; Franklin, Kathy K.

Researchers at the University of Arkansas at Little Rock conducted a study of faculty attitudes about the use of technology in the college classroom using electronic focus group sessions. This paper examines the electronic focus group data collection procedure. The electronic sessions were conducted in a decision-support center on campus with 13…

Flat-Lens Focusing of Electron Beams in Graphene

PubMed Central

Tang, Yang; Cao, Xiyuan; Guo, Ran; Zhang, Yanyan; Che, Zhiyuan; Yannick, Fouodji T.; Zhang, Weiping; Du, Junjie

2016-01-01

Coupling electron beams carrying information into electronic units is fundamental in microelectronics. This requires precision manipulation of electron beams through a coupler with a good focusing ability. In graphene, the focusing of wide electron beams has been successfully demonstrated by a circular p-n junction. However, it is not favorable for information coupling since the focal length is so small that the focal spot locates inside the circular gated region, rather than in the background region. Here, we demonstrate that an array of gate-defined quantum dots, which has gradually changing lattice spacing in the direction transverse to propagation, can focus electrons outside itself, providing a possibility to make a coupler in graphene. The focusing effect can be understood as due to the gradient change of effective refractive indices, which are defined by the local energy band in a periodic potential. The strong focusing can be achieved by suitably choosing the lattice gradient and the layer number in the incident direction, offering an effective solution to precision manipulation of electron beams with wide electron energy range and high angular tolerance. PMID:27628099

Factorial Structure of the New Ecological Paradigm Scale in Two French Samples

ERIC Educational Resources Information Center

Fleury-Bahi, Ghozlane; Marcouyeux, Aurore; Renard, Elise; Roussiau, Nicolas

2015-01-01

The principal objective of this research is to test the factorial structure of the New Ecological Paradigm scale on a population of men and women residing in France. The tested model is a second-order factorial model. This factorial structure is evaluated on two separate samples to test the stability of the solution (a first sample of 253…

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation.

PubMed

Lindholm, Henrik; Egels-Zandén, Niklas; Rudén, Christina

2016-10-01

In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. To examine how well suppliers' chemical health and safety performance complies with buyers' CSR policies and whether audited factories improve their performance. CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits.

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation

PubMed Central

2016-01-01

Background In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. Objectives To examine how well suppliers’ chemical health and safety performance complies with buyers’ CSR policies and whether audited factories improve their performance. Methods CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Results Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Conclusions Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits. PMID:27611103

Effect of factory effluents on physiological and biochemical contents of Gossypium hirsutum l.

PubMed

Muthusamy, A; Jayabalan, N

2001-10-01

The effect of sago and sugar factory effluents was studied on Gossypium hirsutum L. var. MCU 5 and MCU 11. Plants were irrigated with 0, 25, 50, 75 and 100% of effluents of both factories. At lower concentration (25%) of sugar factory effluents had stimulatory effect on all biochemical contents observed. Moreover, all concentration of sago factory effluents were found to have inhibitory effect on all biochemical contents except proline content which increased with increasing concentration of both the effluents. Plants growing on adjacent to sago and sugar factories or they irrigated with such type of polluted water, may accumulate the heavy metals found in both the effluents, at higher levels in plant products and if consumed may have similar effect on living organisms.

The International Design Study for the Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, K.

2008-02-21

The International Design Study for a future Neutrino Factory and super-beam facility (the ISS) established the physics case for a high-precision programme of long-baseline neutrino-oscillation measurements. The ISS also identified baseline specifications for the Neutrino Factory accelerator complex and the neutrino detector systems. This paper summarises the objectives of the International Design Study for the Neutrino Factory (the IDS-NF). The IDS-NF will build on the work of the ISS to deliver a Reference Design Report for the Neutrino Factory by 2012/13 and an Interim Design Report by 2010/11.

19 CFR Appendix to Part 102 - Textile and Apparel Manufacturer Identification

Code of Federal Regulations, 2011 CFR

2011-04-01

... factories in Macau start with the same words, “Fabrica de Artigos de Vestuario,” which means “Factory of Clothing.” For a factory named “Fabrica de Artigos de Vestuario JUMP HIGH Ltd,” the portion of the factory...; VE20TCEN5880CAR Fabrica de Artigos de Vestuario TOP JOB, Grand River Building, FI 2-4, Macau; MOTOPJOB24MAC THE...

19 CFR Appendix to Part 102 - Textile and Apparel Manufacturer Identification

Code of Federal Regulations, 2010 CFR

2010-04-01

... factories in Macau start with the same words, “Fabrica de Artigos de Vestuario,” which means “Factory of Clothing.” For a factory named “Fabrica de Artigos de Vestuario JUMP HIGH Ltd,” the portion of the factory...; VE20TCEN5880CAR Fabrica de Artigos de Vestuario TOP JOB, Grand River Building, FI 2-4, Macau; MOTOPJOB24MAC THE...

Bulgar Factories (Trading Posts) in the Kama River Area as a Factor of Adjustment to Feudalism

ERIC Educational Resources Information Center

Krylasova, Natalia B.; Belavin, Andrei M.; Podosenova, Yulia A.

2016-01-01

At the start of the 2nd ML AD a number of trading posts, or factories, emerged in the Cis-Ural region with participation of Bulgar handicraftsmen and merchants. They were townships populated by various ethnic groups. Several centuries later similar factories were set up by natives of the Cis-Ural region in Western Siberia. These factories have…

Producing gallium arsenide crystals in space

NASA Technical Reports Server (NTRS)

Randolph, R. L.

1984-01-01

The production of high quality crystals in space is a promising near-term application of microgravity processing. Gallium arsenide is the selected material for initial commercial production because of its inherent superior electronic properties, wide range of market applications, and broad base of on-going device development effort. Plausible product prices can absorb the high cost of space transportation for the initial flights provided by the Space Transportation System. The next step for bulk crystal growth, beyond the STS, is planned to come later with the use of free flyers or a space station, where real benefits are foreseen. The use of these vehicles, together with refinement and increasing automation of space-based crystal growth factories, will bring down costs and will support growing demands for high quality GaAs and other specialty electronic and electro-optical crystals grown in space.

Particle flow oriented electromagnetic calorimeter optimization for the circular electron positron collider

NASA Astrophysics Data System (ADS)

Zhao, H.; Fu, C.; Yu, D.; Wang, Z.; Hu, T.; Ruan, M.

2018-03-01

The design and optimization of the Electromagnetic Calorimeter (ECAL) are crucial for the Circular Electron Positron Collider (CEPC) project, a proposed future Higgs/Z factory. Following the reference design of the International Large Detector (ILD), a set of silicon-tungsten sampling ECAL geometries are implemented into the Geant4 simulation, whose performance is then scanned using Arbor algorithm. The photon energy response at different ECAL longitudinal structures is analyzed, and the separation performance between nearby photon showers with different ECAL transverse cell sizes is investigated and parametrized. The overall performance is characterized by a set of physics benchmarks, including νν H events where Higgs boson decays into a pair of photons (EM objects) or gluons (jets) and Z→τ+τ- events. Based on these results, we propose an optimized ECAL geometry for the CEPC project.

Rapid prototyping 3D virtual world interfaces within a virtual factory environment

NASA Technical Reports Server (NTRS)

Kosta, Charles Paul; Krolak, Patrick D.

1993-01-01

On-going work into user requirements analysis using CLIPS (NASA/JSC) expert systems as an intelligent event simulator has led to research into three-dimensional (3D) interfaces. Previous work involved CLIPS and two-dimensional (2D) models. Integral to this work was the development of the University of Massachusetts Lowell parallel version of CLIPS, called PCLIPS. This allowed us to create both a Software Bus and a group problem-solving environment for expert systems development. By shifting the PCLIPS paradigm to use the VEOS messaging protocol we have merged VEOS (HlTL/Seattle) and CLIPS into a distributed virtual worlds prototyping environment (VCLIPS). VCLIPS uses the VEOS protocol layer to allow multiple experts to cooperate on a single problem. We have begun to look at the control of a virtual factory. In the virtual factory there are actors and objects as found in our Lincoln Logs Factory of the Future project. In this artificial reality architecture there are three VCLIPS entities in action. One entity is responsible for display and user events in the 3D virtual world. Another is responsible for either simulating the virtual factory or communicating with the real factory. The third is a user interface expert. The interface expert maps user input levels, within the current prototype, to control information for the factory. The interface to the virtual factory is based on a camera paradigm. The graphics subsystem generates camera views of the factory on standard X-Window displays. The camera allows for view control and object control. Control or the factory is accomplished by the user reaching into the camera views to perform object interactions. All communication between the separate CLIPS expert systems is done through VEOS.

Wiggler plane focusing in a linear free electron laser

DOEpatents

Scharlemann, Ernst T.

1988-01-01

Free electron laser apparatus that provides a magnetic centering force to turn or focus a non-axial electron toward the longitudinal axis as desired. The focusing effect is provided by wiggler magnet pole faces that are approximately parabolically shaped.

Five focus strategies to organize health care delivery.

PubMed

Peltokorpi, Antti; Linna, Miika; Malmström, Tomi; Torkki, Paulus; Lillrank, Paul Martin

2016-01-01

The focused factory is one of the concepts that decision-makers have adopted for improving health care delivery. However, disorganized definitions of focus have led to findings that cannot be utilized systematically. The purpose of this paper is to discuss strategic options to focus health care operations. First the literature on focus in health care is reviewed revealing conceptual challenges. Second, a definition of focus in terms of demand and requisite variety is defined, and the mechanisms of focus are explicated. A classification of five focus strategies that follow the original idea to reduce variety in products and markets is presented. Finally, the paper examines managerial possibilities linked to the focus strategies. The paper proposes a framework of five customer-oriented focus strategies which aim at reducing variety in different characteristics of care pathways: population; urgency and severity; illnesses and symptoms; care practices and processes; and care outcomes. Empirical research is needed to evaluate the costs and benefits of the five strategies and about system-level effects of focused units on competition and coordination. Focus is an enabling condition that needs to be exploited using specific demand and supply management practices. It is essential to understand how focus mechanisms differ between strategies, and to select focus that fits with organization's strategy and key performance indicators. Compared to previous more resource-oriented approaches, this study provides theoretically solid and practically relevant customer-oriented framework for focusing in health care.

Dental caries experience in high risk soft drinks factory workers of South India: a comparative study.

PubMed

Kumar, Sandeep; Acharya, Shashidhar; Vasthare, Ramprasad; Singh, Siddharth Kumar; Gupta, Anjali; Debnath, Nitai

2014-01-01

The consumption of soft-drinks has been associated with dental caries development. The aim was to evaluate dental caries experience amongst the workers working in soft-drink industries located in South India and compare it with other factory workers. To evaluate the validity of specific caries index (SCI), which is newer index for caries diagnosis. This was a cross-sectional study carried out among 420 workers (210 in soft-drinks factory and 210 in other factories), in the age group of 20-45 years of Udupi district, Karnataka, India. Index used for clinical examination was decayed, missing, filled surfaces (DMFS) index and SCI. The mean and standard deviation (SD) of decayed surface (5.8 ± 1.8), missing surface (4.3 ± 2) and filled surface (1.94 ± 1.95) and total DMFS score (12.11 ± 3.8) in soft-drinks factory workers were found to be significantly higher than the other factory workers. The total SCI score (mean and SD) was found to be significantly higher in soft-drinks factory workers (5.83 ± 1.80) compared with other factory workers (4.56 ± 1.45). There was a high correlation obtained between SCI score and DMFS score. The regression equation given by DMFS = 1.178 + 1.866 (SCI scores). The caries experience was higher in workers working in soft-drinks factory and this study also showed that specific caries index can be used as a valid index for assessing dental caries experience.

Biosynthetic approaches to creating bioactive fungal metabolites: Pathway engineering and activation of secondary metabolism.

PubMed

Motoyama, Takayuki; Osada, Hiroyuki

2016-12-15

The diversity of natural products is greater than that of combinatorial chemistry compounds and is similar to that of drugs. Compounds rich in sp 3 carbons, such as natural products, typically exhibit high structural complexity and high specificity to molecular targets. Microorganisms can synthesize such sp 3 carbon-rich compounds and can be used as excellent factories for making bioactive compounds. Here, we mainly focus on pathway engineering of two sp 3 carbon-rich bioactive indole alkaloids, fumitremorgin C and terpendole E. We also demonstrate the importance of activation of secondary metabolism by focusing on tenuazonic acid, a bioactive tetramic acid compound, as an example. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Role of Spatial Analysis in Detecting the Consequence of the Factory Sites : Case Study of Assalaya Factory-Sudan

NASA Astrophysics Data System (ADS)

Khair, Amar Sharaf Eldin; Purwanto; RyaSunoko, Henna; Abdullah, Omer Adam

2018-02-01

Spatial analysis is considered as one of the most important science for identifying the most appropriate site for industrialization and also to alleviate the environmental ramifications caused by factories. This study aims at analyzing the Assalaya sugarcane factory site by the use of spatial analysis to determine whether it has ramification on the White Nile River. The methodology employed for this study is Global Position System (GPS) to identify the coordinate system of the study phenomena and other relative factors. The study will also make use Geographical Information System (GIS) to implement the spatial analysis. Satellite data (LandsatDem-Digital Elevation Model) will be considered for the study area and factory in identifying the consequences by analyzing the location of the factory through several features such as hydrological, contour line and geological analysis. Data analysis reveals that the factory site is inappropriate and according to observation on the ground it has consequences on the White Nile River. Based on the finding, the study recommended some suggestions to avoid the aftermath of any factory in general. We have to take advantage of this new technological method to aid in selecting most apt locations for industries that will create an ambient environment.

Factorial Experiments: Efficient Tools for Evaluation of Intervention Components

PubMed Central

Collins, Linda M.; Dziak, John J.; Kugler, Kari C.; Trail, Jessica B.

2014-01-01

Background An understanding of the individual and combined effects of a set of intervention components is important for moving the science of preventive medicine interventions forward. This understanding can often be achieved in an efficient and economical way via a factorial experiment, in which two or more independent variables are manipulated. The factorial experiment is a complement to the randomized controlled trial (RCT); the two designs address different research questions. Purpose This article offers an introduction to factorial experiments aimed at investigators trained primarily in the RCT. Method The factorial experiment is compared and contrasted with other experimental designs used commonly in intervention science to highlight where each is most efficient and appropriate. Results Several points are made: factorial experiments make very efficient use of experimental subjects when the data are properly analyzed; a factorial experiment can have excellent statistical power even if it has relatively few subjects per experimental condition; and when conducting research to select components for inclusion in a multicomponent intervention, interactions should be studied rather than avoided. Conclusions Investigators in preventive medicine and related areas should begin considering factorial experiments alongside other approaches. Experimental designs should be chosen from a resource management perspective, which states that the best experimental design is the one that provides the greatest scientific benefit without exceeding available resources. PMID:25092122

Inverse photoelectron spectrometer with magnetically focused electron gun

NASA Technical Reports Server (NTRS)

Krainsky, Isay L.

1991-01-01

An inverse photoelectron spectrometer is described which is based on the design of a magnetically focused low energy electron gun. The magnetic lens extends its field over a relatively large segment of the electron trajectory, which could provide a better focusing effect on a high-current-density low-velocity electron beam, providing the magnetic field in the vicinity of the target is reduced sufficiently to preserve the collinearity of the beam. In order to prove the concept, ray tracing is conducted using the Herrmannsfeldt program for solving electron trajectories in electrostatic and magnetostatic focusing systems. The program allows the calculation of the angles of the electron trajectories with the z axis, at the target location. The results of the ray-tracing procedure conducted for this gun are discussed. Some of the advantages of the magnetic focusing are also discussed.

Supernova Dust Factory in M74

NASA Image and Video Library

2006-06-09

Astronomers using NASA Spitzer Space Telescope have spotted a dust factory 30 million light-years away in the spiral galaxy M74. The factory is located at the scene of a massive star explosive death, or supernova.

The Instrumented Flux Return Detector of the SuperB Experiment: R&D Studies and First Results of the Fermilab Beam Test

NASA Astrophysics Data System (ADS)

Andreotti, M.; Baldini, W.; Calabrese, R.; Carassiti, V.; Cotta, A.; Cibinetto, G.; Evangelisti, F.; Luppi, E.; Malaguti, R.; Manzali, M.; Melchiorri, M.; Munerato, M.; Santoro, V.; Tommassetti, L.; Benettoni, M.; Dalcorso, F.; Feltresi, E.; Fanin, C.; Gagliardi, N.; Posocco, M.; Rotondo, M.; Stroili, R.

SuperB is a super-flavor factory that will be built in Tor Vergata (Italy). The project, recently approved by the Italian Government, and classified as the flagship project of the Italian INFN, foresees the construction of a high intensity asymmetric electron-positron collider and of the related detector. The expected luminosity of 2x1036cm-2 s-1, a factor 100 higher than the last generation of B-factories, will allow the high statistic study of rare decays and, possibly, will allow a deeper insight in the field of new physics. Part of the SuperB apparatus is the Instrumented Flux Return (IFR). This detector exploits the flux return iron structure of the superconducting solenoid as absorber for the identification of muons and neutral hadrons. In more details, It consists of ≃ 92 cm of iron interleaved by 9 layers of highly segmented scintillators. The detection technique is based on relatively inexpensive extruded plastic scintillator bars produced at the FNAL-NICADD facility. The scintillation light is collected through Wave Length Shifting fibers and guided to recently developed devices called Silicon Photon Multipliers used as photodetectors. The use of plastic scintillator as active material ensures reliability, robustness and long term stability while the high granularity and the fast response guarantee a good space-time resolution, extremely important to cope with the expected high particles flux. The readout scheme under evaluation is this manuscript is the double coordinate readout ("BIRO readout") where two layers of orthogonal scintillator bars provide both, the polar and azimuthal coordinate. In order to deeply understand the performances and possible drawbacks of the above technique, a full depth prototype has been designed and built in Ferrara and Padova, and tested at the Fermilab Test Beam Facility (FBTF) in December 2010. In this paper a comprehensive description of the IFR related R&D studies will be presented. In particular, we will focus on the results of the Fermilab beam test, issues and future activities will also be outlined.

Occupational Health Risks Among Trichloroethylene-Exposed Workers in a Clock Manufacturing Factory

PubMed Central

Singthong, Siriporn; Pakkong, Pannee; Choosang, Kantima; Wongsanit, Sarinya

2015-01-01

Trichloroethylene (TCE) is an important volatile organic compound once widely used in industry throughout the world. Occupational exposure to TCE can cause a number of health hazards such as allergic reactions and genetic damage. The purpose of this study was to evaluate occupational exposure to TCE, by analysis of the air in the breathing zone and of urine from workers employed in a clock manufacturing factory. A subjective symptom survey was conducted by using a self-administered questionnaire to evaluate the health hazards. Micronucleus (MN) frequency, based on the cytokinesis-block micronucleus assay (CBMN) in peripheral blood lymphocytes, (PBLs) was used as a biomarker for chromosome damage. A total of 244 participants, including 171 workers occupationally exposed to TCE and 73 non-exposed control employees, working mainly in office jobs in the same factory, were enrolled in this study. Analyses of airborne TCE concentrations in the workplace, and of urinary trichloroacetic acid (TCA) of the workers and controls, were performed by Gas Chromatography-Electron Capture Detector (GC-ECD) using the modified headspace technique. The average concentration of TCE in the workplace breathing zone was 27.83 ± 6.02 ppm. The average level of urinary TCA of the exposed workers and controls was 14.84 ± 1.62, 2.95 ± 0.28 mg/L. The frequency of MN/1000BN was 7.029 ± 0.39, significantly higher than for those in the control group (3.57 ± 0.31, p = 0.001). According to multiple linear regression analysis, the results indicated that urinary TCA levels correlated with the increased MN in exposed workers (r = 0.285, p < 0.001). The prevalence rate of subjective symptoms in the exposed group was 9.61-11.76 times higher than the rate of the non-exposed group (p < 0.001). It was found that skin (29.6%) and respiratory symptoms (21.1%) were the most frequent among the exposed workers. In conclusion, these results indicate that increased micronucleus frequency is associated with occupational trichloroethylene exposure. The use of TCE in the factory is threatening workers’ health. PMID:25560356

Occupational health risks among trichloroethylene-exposed workers in a clock manufacturing factory.

PubMed

Singthong, Siriporn; Pakkong, Pannee; Choosang, Kantima; Wongsanit, Sarinya

2014-08-22

Trichloroethylene (TCE) is an important volatile organic compound once widely used in industry throughout the world. Occupational exposure to TCE can cause a number of health hazards such as allergic reactions and genetic damage. The purpose of this study was to evaluate occupational exposure to TCE, by analysis of the air in the breathing zone and of urine from workers employed in a clock manufacturing factory. A subjective symptom survey was conducted by using a self-administered questionnaire to evaluate the health hazards. Micronucleus (MN) frequency, based on the cytokinesis-block micronucleus assay (CBMN) in peripheral blood lymphocytes, (PBLs) was used as a biomarker for chromosome damage. A total of 244 participants, including 171 workers occupationally exposed to TCE and 73 non-exposed control employees, working mainly in office jobs in the same factory, were enrolled in this study. Analyses of airborne TCE concentrations in the workplace, and of urinary trichloroacetic acid (TCA) of the workers and controls, were performed by Gas Chromatography-Electron Capture Detector (GC-ECD) using the modified headspace technique. The average concentration of TCE in the workplace breathing zone was 27.83 ± 6.02 ppm. The average level of urinary TCA of the exposed workers and controls was 14.84 ± 1.62, 2.95 ± 0.28 mg/L. The frequency of MN/1000BN was 7.029 ± 0.39, significantly higher than for those in the control group (3.57 ± 0.31, p = 0.001). According to multiple linear regression analysis, the results indicated that urinary TCA levels correlated with the increased MN in exposed workers (r = 0.285, p < 0.001). The prevalence rate of subjective symptoms in the exposed group was 9.61-11.76 times higher than the rate of the non-exposed group (p < 0.001). It was found that skin (29.6%) and respiratory symptoms (21.1%) were the most frequent among the exposed workers. In conclusion, these results indicate that increased micronucleus frequency is associated with occupational trichloroethylene exposure. The use of TCE in the factory is threatening workers' health.

Post-industrial Objects and Buildings in the Structure of the Contemporary City

NASA Astrophysics Data System (ADS)

Klopotowski, Maciej; Zagroba, Marek

2017-12-01

In the second half of the 19th century, provincial Bialystok became the largest industrial city in the eastern territories of the former Republic of Poland. The cause of this economic growth was the development of the railway network and changing customs policy in the Russian Empire. Over a dozen or so years, several dozens of textile factories and numerous craft workshops were established in the city. The industrial prosperity of the city development was interrupted by the First and Second World War. The second half of the twentieth century also brought political and economic changes. They resulted from the nationalization of industry and the introduction of a socialist economy. In the following decades, heavy and light industries developed in the city. Metallurgical plants and factories of houses, furniture, carpets, packaging, electronics, glassworks and food processing were established. On the outskirts of the city appeared industrial districts, which except the factories concentrated also storage facilities. Economic changes that took place in Poland after 1989 caused another change in the area of Białystok industry. Many state-owned factories went bankrupt and the remaining facilities and areas had to change their intended use. The conducted research compares the methods of dealing with the currently unnecessary structure. This has taken into account its location value in the city’s structure and its cultural characteristics. Analyses allowed to indicate new use of post-industrial facilities. There were selected post-industrial buildings that currently serve residential, office, educational and commercial purposes or house cultural institutions. There are also indicated facilities that have not found their new destination and have been demolished or are not currently in use. In conclusion, the research found that the city’s post-industrial legacy is equal to its heritage - it builds the identity of the place and it is also the difficult urban problem of the revitalization of large urban areas. Projects which were evaluated as well as positively as negatively are indicated. Their analysis allowed us to formulate general conclusions.

Baby Factories in Nigeria: Starting the Discussion Toward a National Prevention Policy.

PubMed

Makinde, Olusesan Ayodeji; Olaleye, Olalekan; Makinde, Olufunmbi Olukemi; Huntley, Svetlana S; Brown, Brandon

2017-01-01

Baby factories and baby harvesting are relatively new terms that involve breeding, trafficking, and abuse of infants and their biological mothers. Since it was first described in a United Nations Educational, Scientific and Cultural Organization report in Nigeria in 2006, several more baby factories have been discovered over the years. Infertile women are noted to be major patrons of these baby factories due to the stigmatization of childless couples in Southern Nigeria and issues around cultural acceptability of surrogacy and adoption. These practices have contributed to the growth in the industry which results in physical, psychological, and sexual violence to the victims. Tackling baby factories will involve a multifaceted approach that includes advocacy and enacting of legislation barring baby factories and infant trafficking and harsh consequences for their patrons. Also, programs to educate young girls on preventing unwanted pregnancies are needed. Methods of improving awareness and acceptability of adoption and surrogacy and reducing the administrative and legal bottlenecks associated with these options for infertile couples should be explored to diminish the importance of baby factories. © The Author(s) 2015.

A practical limit to trials needed in one-person randomized controlled experiments.

PubMed

Alemi, Roshan; Alemi, Farrokh

2007-01-01

Recently in this journal, J. Olsson and colleagues suggested the use of factorial experimental designs to guide a patient's efforts to choose among multiple interventions. These authors argue that factorial design, where every possible combination of the interventions is tried, is superior to sequential trial and errors. Factorial design is efficient in identifying the effectiveness of interventions (factor effect). Most patients care only about feeling better and not why their conditions are improving. If the goal of the patient is to get better and not to estimate the factor effect, then no control groups are needed. In this article, we show a modification in the factorial design of experiments proposed by Olsson and colleagues where a full-factorial design is planned, but experimentation is stopped when the patient's condition improves. With this modification, the number of trials is radically fewer than those needed by factorial design. For example, a patient trying out 4 different interventions with a median probability of success of .50 is expected to need 2 trials before stopping the experimentation in comparison with 32 in a full-factorial design.

Wiggler plane focusing in a linear free electron laser

DOEpatents

Scharlemann, E.T.

1985-11-21

This disclosure describes a free electron laser apparatus that provides a magnetic centering force to turn or focus a non-axial electron toward the longitudinal axis as desired. The focusing effect is provided by wiggler magnet pole faces that are approximately parabolically shaped.

Rethinking policy perspectives on childhood stunting: time to formulate a structural and multifactorial strategy.

PubMed

Subramanian, S V; Mejía-Guevara, Iván; Krishna, Aditi

2016-05-01

Stunting and chronic undernutrition among children in South Asia remain a major unresolved global health issue. There are compelling intrinsic and moral reasons to ensure that children attain their optimal growth potential facilitated via promotion of healthy living conditions. Investments in efforts to ensure that children's growth is not faltered also have substantial instrumental benefits in terms of cognitive and economic development. Using the case of India, we critique three prevailing approaches to reducing undernutrition among children: an over-reliance on macroeconomic growth as a potent policy instrument, a disproportionate focus on interpreting undernutrition as a demand-side problem and an over-reliance on unintegrated single-factorial (one at a time) approaches to policy and research. Using existing evidence, we develop a case for support-led policy approach with a focus on integrated and structural factors to addressing the problem of undernutrition among children in India. Key messages Eliminating child undernutrition is important from an intrinsic perspective and offers considerable instrumental benefits to individual and society. Evidence suggests that an exclusive reliance on a growth-mediated strategy to eliminate stunting needs to be reconsidered, suggesting the need for a substantial support-led strategy. Interpreting and addressing undernutrition as a demand-side problem with proximal single-factorial interventions is futile. There is an urgent need to develop interventions that address the broader structural and upstream causes of child undernutrition. © 2016 The Authors. Maternal & Child Nutrition published by John Wiley & Sons Ltd.

Exploring views on long term rehabilitation for people with stroke in a developing country: findings from focus group discussions

PubMed Central

2014-01-01

Background The importance of long term rehabilitation for people with stroke is increasingly evident, yet it is not known whether such services can be materialised in countries with limited community resources. In this study, we explored the perception of rehabilitation professionals and people with stroke towards long term stroke rehabilitation services and potential approaches to enable provision of these services. Views from providers and users are important in ensuring whatever strategies developed for long term stroke rehabilitations are feasible and acceptable. Methods Focus group discussions were conducted involving 15 rehabilitation professionals and eight long term stroke survivors. All recorded conversations were transcribed verbatim and analysed using the principles of qualitative research. Results Both groups agreed that people with stroke may benefit from more rehabilitation compared to the amount of rehabilitation services presently provided. Views regarding the unavailability of long term rehabilitation services due to multi-factorial barriers were recognised. The groups also highlighted the urgent need for the establishment of community-based stroke rehabilitation centres. Family-assisted home therapy was viewed as a potential approach to continued rehabilitation for long term stroke survivors, given careful planning to overcome several family-related issues. Conclusions Barriers to the provision of long term stroke rehabilitation services are multi-factorial. Establishment of community-based stroke rehabilitation centres and training family members to conduct home-based therapy are two potential strategies to enable the continuation of rehabilitation for long term stroke survivors. PMID:24606911

1. GENERAL VIEW OF COMPLEX, SHOWING FACTORY BUILDING IN LEFT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW OF COMPLEX, SHOWING FACTORY BUILDING IN LEFT FOREGROUND, GRINDING PLATFORM AT REAR OF FACTORY, AND STABLE AREA AND OVERSEER'S HOUSE TO RIGHT - Caneel Bay Plantation, General Views, Cruz Bay, St. John, VI

Survey of Nitrate Ion Concentrations in Vegetables Cultivated in Plant Factories: Comparison with Open-Culture Vegetables.

PubMed

Oka, Yuka; Hirayama, Izumi; Yoshikawa, Mitsuhide; Yokoyama, Tomoko; Iida, Kenji; Iwakoshi, Katsushi; Suzuki, Ayana; Yanagihara, Midori; Segawa, Yukino; Kukimoto, Sonomi; Hamada, Humika; Matsuzawa, Satomi; Tabata, Setsuko; Sasamoto, Takeo

2017-01-01

A survey of nitrate-ion concentrations in plant-factory-cultured leafy vegetables was conducted. 344 samples of twenty-one varieties of raw leafy vegetables were examined using HPLC. The nitrate-ion concentrations in plant-factory-cultured leafy vegetables were found to be LOD-6,800 mg/kg. Furthermore, the average concentration values varied among different leafy vegetables. The average values for plant-factory-cultured leafy vegetables were higher than those of open-cultured leafy vegetables reported in previous studies, such as the values listed in the Standard Tables of Food Composition in Japan- 2015 - (Seventh revised edition). For some plant-factory-cultured leafy vegetables, such as salad spinach, the average values were above the maximum permissible levels of nitrate concentration in EC No 1258/2011; however, even when these plant-factory-cultured vegetables were routinely eaten, the intake of nitrate ions in humans did not exceed the ADI.

Internal Structure and Partial Invariance across Gender in the Spanish Version of the Reasoning Test Battery.

PubMed

Elosua, Paula; Mujika, Josu

2015-10-13

The Reasoning Test Battery (BPR) is an instrument built on theories of the hierarchical organization of cognitive abilities and therefore consists of different tasks related with abstract, numerical, verbal, practical, spatial and mechanical reasoning. It was originally created in Belgium and later adapted to Portuguese. There are three forms of the battery consisting of different items and scales which cover an age range from 9 to 22. This paper focuses on the adaptation of the BPR to Spanish, and analyzes different aspects of its internal structure: (a) exploratory item factor analysis was applied to assess the presence of a dominant factor for each partial scale; (b) the general underlined model was evaluated through confirmatory factor analysis, and (c) factorial invariance across gender was studied. The sample consisted of 2624 Spanish students. The results concluded the presence of a general factor beyond the scales, with equivalent values for men and women, and gender differences in the factorial structure which affect the numerical reasoning, abstract reasoning and mechanical reasoning scales.

Factors that influence the tribocharging of pulverulent materials in compressed-air devices

NASA Astrophysics Data System (ADS)

Das, S.; Medles, K.; Mihalcioiu, A.; Beleca, R.; Dragan, C.; Dascalescu, L.

2008-12-01

Tribocharging of pulverulent materials in compressed-air devices is a typical multi-factorial process. This paper aims at demonstrating the interest of using the design of experiments methodology in association with virtual instrumentation for quantifying the effects of various process varaibles and of their interactions, as a prerequisite for the development of new tribocharging devices for industrial applications. The study is focused on the tribocharging of PVC powders in compressed-air devices similar to those employed in electrostatic painting. A classical 2 full-factorial design (3 factors at two levels) was employed for conducting the experiments. The response function was the charge/mass ratio of the material collected in a modified Faraday cage, at the exit of the tribocharging device. The charge/mass ratio was found to increase with the injection pressure and the vortex pressure in the tribocharging device, and to decrease with the increasing of the feed rate. In the present study an in-house design of experiments software was employed for statistical analysis of experimental data and validation of the experimental model.

Design, engineering, and construction of photosynthetic microbial cell factories for renewable solar fuel production.

PubMed

Lindblad, Peter; Lindberg, Pia; Oliveira, Paulo; Stensjö, Karin; Heidorn, Thorsten

2012-01-01

There is an urgent need to develop sustainable solutions to convert solar energy into energy carriers used in the society. In addition to solar cells generating electricity, there are several options to generate solar fuels. This paper outlines and discusses the design and engineering of photosynthetic microbial systems for the generation of renewable solar fuels, with a focus on cyanobacteria. Cyanobacteria are prokaryotic microorganisms with the same type of photosynthesis as higher plants. Native and engineered cyanobacteria have been used by us and others as model systems to examine, demonstrate, and develop photobiological H(2) production. More recently, the production of carbon-containing solar fuels like ethanol, butanol, and isoprene have been demonstrated. We are using a synthetic biology approach to develop efficient photosynthetic microbial cell factories for direct generation of biofuels from solar energy. Present progress and advances in the design, engineering, and construction of such cyanobacterial cells for the generation of a portfolio of solar fuels, e.g., hydrogen, alcohols, and isoprene, are presented and discussed. Possibilities and challenges when introducing and using synthetic biology are highlighted.

Issues in Acceleration of A Muon Beam for a Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Delayen; D. Douglas; L. Harwood

2001-06-01

We have developed a concept for acceleration of a large phase-space, pulsed muon beam from 190 MeV to 50 GeV as part of a collaborative study of the feasibility of a neutrino factory based on in-flight decay of muons. The muon beam's initial energy spread was {approximately}20% and each bunch has the physical size of a soccer ball. Production of the muons will be quite expensive, so prevention of loss due to scraping or decay is critical. The former drives the system to large apertures and the latter calls for high real-estate-average gradients. The solution to be presented utilizes amore » 3 GeV linac to capture the beam, a 4-pass recirculating linac to get the beam to 10 GeV, and then a 5-pass linac to get the beam to 50 GeV. Throughout the system, longitudinal dynamics issues far outweighed transverse dynamics issues. This paper focuses on the issues surrounding the choice of superconducting rf structures over copper structures.« less

AUTOMATING ASSET KNOWLEDGE WITH MTCONNECT

PubMed Central

Venkatesh, Sid; Ly, Sidney; Manning, Martin; Michaloski, John; Proctor, Fred

2017-01-01

In order to maximize assets, manufacturers should use real-time knowledge garnered from ongoing and continuous collection and evaluation of factory-floor machine status data. In discrete parts manufacturing, factory machine monitoring has been difficult, due primarily to closed, proprietary automation equipment that make integration difficult. Recently, there has been a push in applying the data acquisition concepts of MTConnect to the real-time acquisition of machine status data. MTConnect is an open, free specification aimed at overcoming the “Islands of Automation” dilemma on the shop floor. With automated asset analysis, manufacturers can improve production to become lean, efficient, and effective. The focus of this paper will be on the deployment of MTConnect to collect real-time machine status to automate asset management. In addition, we will leverage the ISO 22400 standard, which defines an asset and quantifies asset performance metrics. In conjunction with these goals, the deployment of MTConnect in a large aerospace manufacturing facility will be studied with emphasis on asset management and understanding the impact of machine Overall Equipment Effectiveness (OEE) on manufacturing. PMID:28691121

Lattice design for the CEPC double ring scheme

NASA Astrophysics Data System (ADS)

Wang, Yiwei; Su, Feng; Bai, Sha; Zhang, Yuan; Bian, Tianjian; Wang, Dou; Yu, Chenghui; Gao, Jie

2018-01-01

A future Circular Electron Positron Collider (CEPC) has been proposed by China with the main goal of studying the Higgs boson. Its baseline design, chosen on the basis of its performance, is a double ring scheme; an alternative design is a partial double ring scheme which reduces the budget while maintaining an adequate performance. This paper will present the collider ring lattice design for the double ring scheme. The CEPC will also work as a W and a Z factory. For the W and Z modes, except in the RF region, compatible lattices were obtained by scaling down the magnet strength with energy.

Collins fragmentation function measurements at BABAR

NASA Astrophysics Data System (ADS)

Brown, David Norvil

2016-05-01

We present the results of the measurement of Collins asymmetries in electron-positron annihilation events with the BABAR detector in the process e+e- → h1h2X, for charged hadrons where h1h2 = KK, Kπ, or ππ. Using 468 fb-1 of data collected by BABAR at the SLAC PEP-II B factory, we observe distinct azimuthal asymmetries for hadrons in opposite thrust hemispheres of events, with the asymmetries increasing in proportion to the hadron energies. We find Kπ asymmetries similar to those for ππ pairs, with the high-energy KK asymmetries generally larger.

On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas

DOE PAGES

Bagdasarov, G. A.; Bobrova, N. A.; Boldarev, A. S.; ...

2017-12-27

A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. Our method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. We could use large aspect ratio rectangular capillaries to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.

On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bagdasarov, G. A.; Bobrova, N. A.; Boldarev, A. S.

A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. Our method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. We could use large aspect ratio rectangular capillaries to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.

On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas

NASA Astrophysics Data System (ADS)

Bagdasarov, G. A.; Bobrova, N. A.; Boldarev, A. S.; Olkhovskaya, O. G.; Sasorov, P. V.; Gasilov, V. A.; Barber, S. K.; Bulanov, S. S.; Gonsalves, A. J.; Schroeder, C. B.; van Tilborg, J.; Esarey, E.; Leemans, W. P.; Levato, T.; Margarone, D.; Korn, G.; Kando, M.; Bulanov, S. V.

2017-12-01

A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique, is proposed. This method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus on the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. Large aspect ratio rectangular capillaries might be used to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.

Expression in Escherichia coli, refolding and crystallization of Aspergillus niger feruloyl esterase A using a serial factorial approach.

PubMed

Benoit, Isabelle; Coutard, Bruno; Oubelaid, Rachid; Asther, Marcel; Bignon, Christophe

2007-09-01

Hydrolysis of plant biomass is achieved by the combined action of enzymes secreted by microorganisms and directed against the backbone and the side chains of plant cell wall polysaccharides. Among side chains degrading enzymes, the feruloyl esterase A (FAEA) specifically removes feruloyl residues. Thus, FAEA has potential applications in a wide range of industrial processes such as paper bleaching or bio-ethanol production. To gain insight into FAEA hydrolysis activity, we solved its crystal structure. In this paper, we report how the use of four consecutive factorial approaches (two incomplete factorials, one sparse matrix, and one full factorial) allowed expressing in Escherichia coli, refolding and then crystallizing Aspergillus niger FAEA in 6 weeks. Culture conditions providing the highest expression level were determined using an incomplete factorial approach made of 12 combinations of four E. coli strains, three culture media and three temperatures (full factorial: 36 combinations). Aspergillus niger FAEA was expressed in the form of inclusion bodies. These were dissolved using a chaotropic agent, and the protein was purified by affinity chromatography on Ni column under denaturing conditions. A suitable buffer for refolding the protein eluted from the Ni column was found using a second incomplete factorial approach made of 96 buffers (full factorial: 3840 combinations). After refolding, the enzyme was further purified by gel filtration, and then crystallized following a standard protocol: initial crystallization conditions were found using commercial crystallization screens based on a sparse matrix. Crystals were then optimized using a full factorial screen.

Microstructural analysis of hot press formed 22MnB5 steel

NASA Astrophysics Data System (ADS)

Aziz, Nuraini; Aqida, Syarifah Nur; Ismail, Izwan

2017-10-01

This paper presents a microstructural study on hot press formed 22MnB5 steel for enhanced mechanical properties. Hot press forming process consists of simultaneous forming and quenching of heated blank. The 22MnB5 steel was processed at three different parameter settings: quenching time, water temperature and water flow rate. 22MnB5 was processed using 33 full factorial design of experiment (DOE). The full factorial DOE was designed using three factors of quenching time, water temperature and water flow rate at three levels. The factors level were quenching time range of 5 - 11 s, water temperature; 5 - 27°C and water flow rate; 20 - 40 L/min. The as-received and hot press forming processed steel was characterised for metallographic study and martensitic structure area percentage using JEOL Field Emission Scanning Electron Microscopic (FESEM). From the experimental finding, the hot press formed 22MnB5 steel consisted of 50 to 84% martensitic structure area. The minimum quenching time of 8 seconds was required to obtain formed sample with high percentage of martensite. These findings contribute to initial design of processing parameters in hot press forming of 22MnB5 steel blanks for automotive component.

In situ determination of Earth matter density in a neutrino factory

NASA Astrophysics Data System (ADS)

Minakata, Hisakazu; Uchinami, Shoichi

2007-04-01

We point out that an accurate in situ determination of the earth matter density ρ is possible in neutrino factory by placing a detector at the magic baseline, L=2π/GFNe where Ne denotes electron number density. The accuracy of matter density determination is excellent in a region of relatively large θ13 with fractional uncertainty δρ/ρ of about 0.43%, 1.3%, and ≲3% at 1σ CL at sin⁡22θ13=0.1, 10-2, and 3×10-3, respectively. At smaller θ13 the uncertainty depends upon the CP phase δ, but it remains small, 3% 7% in more than 3/4 of the entire region of δ at sin⁡22θ13=10-4. The results would allow us to solve the problem of obscured CP violation due to the uncertainty of earth matter density in a wide range of θ13 and δ. It may provide a test for the geophysical model of the earth, or it may serve as a method for a stringent test of the Mikheyev-Smirnov-Wolfenstein theory of neutrino propagation in matter once an accurate geophysical estimation of the matter density is available.

Integrating PCLIPS into ULowell's Lincoln Logs: Factory of the future

NASA Technical Reports Server (NTRS)

Mcgee, Brenda J.; Miller, Mark D.; Krolak, Patrick; Barr, Stanley J.

1990-01-01

We are attempting to show how independent but cooperating expert systems, executing within a parallel production system (PCLIPS), can operate and control a completely automated, fault tolerant prototype of a factory of the future (The Lincoln Logs Factory of the Future). The factory consists of a CAD system for designing the Lincoln Log Houses, two workcells, and a materials handling system. A workcell consists of two robots, part feeders, and a frame mounted vision system.

Factorial experiments: efficient tools for evaluation of intervention components.

PubMed

Collins, Linda M; Dziak, John J; Kugler, Kari C; Trail, Jessica B

2014-10-01

An understanding of the individual and combined effects of a set of intervention components is important for moving the science of preventive medicine interventions forward. This understanding can often be achieved in an efficient and economical way via a factorial experiment, in which two or more independent variables are manipulated. The factorial experiment is a complement to the RCT; the two designs address different research questions. To offer an introduction to factorial experiments aimed at investigators trained primarily in the RCT. The factorial experiment is compared and contrasted with other experimental designs used commonly in intervention science to highlight where each is most efficient and appropriate. Several points are made: factorial experiments make very efficient use of experimental subjects when the data are properly analyzed; a factorial experiment can have excellent statistical power even if it has relatively few subjects per experimental condition; and when conducting research to select components for inclusion in a multicomponent intervention, interactions should be studied rather than avoided. Investigators in preventive medicine and related areas should begin considering factorial experiments alongside other approaches. Experimental designs should be chosen from a resource management perspective, which states that the best experimental design is the one that provides the greatest scientific benefit without exceeding available resources. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Technology and Participation in Japanese Factories: The Consequences for Morale and Productivity.

ERIC Educational Resources Information Center

Hull, Frank; Azumi, Koya

1988-01-01

By fully using their human resources, Japanese factories mass produce goods of low cost and high quality. Participation in Japanese factories occurs in a more hierarchical framework than advocated in the Western model of worker democracy. (JOW)

[Prefrontal clinical symptoms in daily living: screening assessment by means of the short Prefrontal Symptoms Inventory (PSI-20)].

PubMed

Pedrero-Pérez, Eduardo J; Ruiz-Sánchez de León, José M; Morales-Alonso, Sara; Pedrero-Aguilar, Jara; Fernández-Méndez, Laura M

2015-05-01

Estimation of daily symptoms of frontal dysfunction is considered to be essential in order to endow neuro-psychological assessments with ecological validity. The questionnaires available today were constructed to estimate executive problems in daily life in populations with neurological damage. There is a need for instruments focused on measuring these behaviours in the general population or in clinical populations with mild or moderate impairment. To examine the factorial validity and to find evidence of concurrent validity of the short version of the Prefrontal Symptoms Inventory. Three samples were obtained: the first, from the Internet (n = 504); the second, in a non-clinical population by means of paper and pencil (n = 1,257); and the third, from patients being treated for substance addiction (n = 602). A factorial analysis without restraints was used on the first sample and the results were submitted to confirmatory factorial analysis on the other two samples. The three-factor structure that was found was confirmed with excellent indicators of fit in the other two samples. Evidence of concurrent validity was found with quality of life and mental health tests. We propose a short questionnaire for detecting failures of a prefrontal origin in daily living, which improves on the psychometric qualities of similar tests, but is oriented towards severe neurological pathologies. The structural stability of the test ensures it can be used in the general population, for the early detection of cognitive impairment, and in clinical populations with mild or moderate deterioration. A set of criteria are proposed for use in interpreting the results.

Biogas from sugar beet press pulp as substitute of fossil fuel in sugar beet factories.

PubMed

Brooks, L; Parravicini, V; Svardal, K; Kroiss, H; Prendl, L

2008-01-01

Sugar beet press pulp (SBP) accumulates as a by-product in sugar factories and it is generally silaged or dried to be used as animal food. Rising energy prices and the opening of the European Union sugar market has put pressure on the manufacturers to find alternatives for energy supply. The aim of this project was to develop a technology in the treatment of SBP that would lead to savings in energy consumption and would provide a more competitive sugar production from sugar beets. These goals were met by the anaerobic digestion of SBP for biogas production. Lab-scale experiments confirmed the suitability of SBP as substrate for anaerobic bacteria. Pilot-scale experiments focused on process optimization and procedures for a quick start up and operational control. Both single-stage and two-stage process configurations showed similar removal efficiency. A stable biogas production could be achieved in single-stage at a maximum volumetric loading rate of 10 kgCSB/(m(3) x d). Degradation efficiency was 75% for VS and 72% for COD. Average specific gas production reached 530 NL/kgCOD(SBP) or 610 NL/kgVS(SBP). (CH(4): 50 to 53%). The first large-scale biogas plant was put into operation during the sugar processing period 2007 at a Hungarian sugar factory. Digesting approximately 50% of the SBP (800 t/d, 22%TS), the biogas produced could substitute about 40% of the natural gas required for the thermal energy supply within the sugar processing. Copyright IWA Publishing 2008.

Tests of the MICE Electron Muon Ranger frontend electronics with a small scale prototype

NASA Astrophysics Data System (ADS)

Bolognini, D.; Bene, P.; Blondel, A.; Cadoux, F.; Debieux, S.; Giannini, G.; Graulich, J. S.; Lietti, D.; Masciocchi, F.; Prest, M.; Rothenfusser, K.; Vallazza, E.; Wisting, H.

2011-08-01

The MICE experiment is being commissioned at RAL to demonstrate the feasibility of the muon ionization cooling technique for future applications such as the Neutrino Factory and the Muon Collider. The cooling will be evaluated by measuring the emittance before and after the cooling channel with two 4 T spectrometers; to distinguish muons from the background, a multi-detector particle identification system is foreseen: three Time of Flight stations, two Cherenkov counters and a calorimetric system consisting of a pre-shower layer and a fully active scintillator detector (EMR) are used to discriminate muons from pions and electrons. EMR consists of 48 planes of triangular scintillating bars coupled to WLS fibers readout by single PMTs on one side and MAPMTs on the other; each plane sensible area is 1 m 2. This article deals with a small scale prototype of the EMR detector which has been used to test the MAPMT frontend electronics based on the MAROC ASIC; the tests with cosmic rays using both an analog mode and a digital readout mode are presented. A very preliminary study on the cross talk problem is also shown.

Penetration of High Intensity Radiated Fields (HIRF) Into General Aviation Aircraft

NASA Technical Reports Server (NTRS)

Balanis, Constantine A.; Birtcher, Craig R.; Georgakopoulos, Stavros V.; Panaretos, Anastasios H.

2004-01-01

The ability to design and achieve electromagnetic compatibility is becoming more challenging with the rapid development of new electronic products and technologies. The importance of electromagnetic interference (EMI) and electromagnetic compatibility (EMC) issues stems from the fact that the ambient electromagnetic environment has become very hostile; that is, it increases both in density and intensity, while the current trend in technology suggests the number of electronic devices increases in homes, businesses, factories, and transportation vehicles. Furthermore, the operating frequency of products coming into the market continuously increases. While cell phone technology has exceeded 1 GHz and Bluetooth operates at 2.4 GHz, products involving satellite communications operate near 10 GHz and automobile radar systems involve frequencies above 40 GHz. The concern about higher frequencies is that they correspond to smaller wavelengths, therefore electromagnetic waves are able to penetrate equipment enclosure through apertures or even small cracks more easily. In addition, electronic circuits have become small in size, and they are usually placed on motherboards or housed in boxes in very close proximity. Cosite interference and coupling in all electrical and electronic circuit assemblies are two essential issues that have to be examined in every design.

Tracing the contamination origin of coliform bacteria in two small food-processing factories.

PubMed

Tominaga, Tatsuya; Sekine, Masahiro; Oyaizu, Hiroshi

2008-09-01

The objective of this study was to trace contamination sources of coliform bacteria by comparing the types of coliforms between food samples and the processing environments in two small food-processing factories (factories A and B). Fermentation tests of five sugars enabled the successful classification of 16 representative type strains into eight distinct groups. The grouping procedure was then applied to comparison of the coliform flora between food products and various locations in their processing environments. The consistency between each food and the tested locations was evaluated using the Jaccard index. The air conditioner and refrigeration room floor in factory A showed an index of 1.00, while the shaping machine in factory B showed an index of 0.98, indicating that these locations could be contamination sources. The validity of our results was confirmed by randomly amplified polymorphic DNA, which showed 100% matched profiles between the air conditioner and the food in factory A, and highly matched profiles between the machine and the food in factory B. This method for comparing the coliform flora between food and environments has the potential to be a reliable tracing tool for various food industries.

SWITCH: a dynamic CRISPR tool for genome engineering and metabolic pathway control for cell factory construction in Saccharomyces cerevisiae.

PubMed

Vanegas, Katherina García; Lehka, Beata Joanna; Mortensen, Uffe Hasbro

2017-02-08

The yeast Saccharomyces cerevisiae is increasingly used as a cell factory. However, cell factory construction time is a major obstacle towards using yeast for bio-production. Hence, tools to speed up cell factory construction are desirable. In this study, we have developed a new Cas9/dCas9 based system, SWITCH, which allows Saccharomyces cerevisiae strains to iteratively alternate between a genetic engineering state and a pathway control state. Since Cas9 induced recombination events are crucial for SWITCH efficiency, we first developed a technique TAPE, which we have successfully used to address protospacer efficiency. As proof of concept of the use of SWITCH in cell factory construction, we have exploited the genetic engineering state of a SWITCH strain to insert the five genes necessary for naringenin production. Next, the naringenin cell factory was switched to the pathway control state where production was optimized by downregulating an essential gene TSC13, hence, reducing formation of a byproduct. We have successfully integrated two CRISPR tools, one for genetic engineering and one for pathway control, into one system and successfully used it for cell factory construction.

1. FACTORY BUILDING VIEWED FROM THE EAST, CURING AND STORAGE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. FACTORY BUILDING VIEWED FROM THE EAST, CURING AND STORAGE WING TO THE LEFT, BOILING HOUSE IN THE CENTER, GRINDING PLATFORM TO THE FAR RIGHT, ST. THOMAS ISLAND VISIBLE IN BACKGROUND - Caneel Bay Plantation, Sugar Factory, Cruz Bay, St. John, VI

Autocrine and/or paracrine insulin-like growth factor-I activity in skeletal muscle

NASA Technical Reports Server (NTRS)

Adams, Gregory R.

2002-01-01

Similar to bone, skeletal muscle responds and adapts to changes in loading state via mechanisms that appear to be intrinsic to the muscle. One of the mechanisms modulating skeletal muscle adaptation it thought to involve the autocrine and/or paracrine production of insulinlike growth factor-I. This brief review outlines components of the insulinlike growth factor-I system as it relates to skeletal muscle and provides the rationale for the theory that insulinlike growth factor-I is involved with muscle adaptation.

Asymptotic Normality Through Factorial Cumulants and Partition Identities

PubMed Central

Bobecka, Konstancja; Hitczenko, Paweł; López-Blázquez, Fernando; Rempała, Grzegorz; Wesołowski, Jacek

2013-01-01

In the paper we develop an approach to asymptotic normality through factorial cumulants. Factorial cumulants arise in the same manner from factorial moments as do (ordinary) cumulants from (ordinary) moments. Another tool we exploit is a new identity for ‘moments’ of partitions of numbers. The general limiting result is then used to (re-)derive asymptotic normality for several models including classical discrete distributions, occupancy problems in some generalized allocation schemes and two models related to negative multinomial distribution. PMID:24591773

Self-focusing and defocusing of Gaussian laser beams in collisional inhomogeneous plasmas with linear density and temperature ramps

NASA Astrophysics Data System (ADS)

Hashemzadeh, M.

2018-01-01

Self-focusing and defocusing of Gaussian laser beams in collisional inhomogeneous plasmas are investigated in the presence of various laser intensities and linear density and temperature ramps. Considering the ponderomotive force and using the momentum transfer and energy equations, the nonlinear electron density is derived. Taking into account the paraxial approximation and nonlinear electron density, a nonlinear differential equation, governing the focusing and defocusing of the laser beam, is obtained. Results show that in the absence of ramps the laser beam is focused between a minimum and a maximum value of laser intensity. For a certain value of laser intensity and initial electron density, the self-focusing process occurs in a temperature range which reaches its maximum at turning point temperature. However, the laser beam is converged in a narrow range for various amounts of initial electron density. It is indicated that the σ2 parameter and its sign can affect the self-focusing process for different values of laser intensity, initial temperature, and initial density. Finally, it is found that although the electron density ramp-down diverges the laser beam, electron density ramp-up improves the self-focusing process.

On the Asymmetric Focusing of Low-Emittance Electron Bunches via Active Lensing by Using Capillary Discharges

NASA Astrophysics Data System (ADS)

Bulanov, Stepan; Bagdasarov, Gennadiy; Bobrova, Nadezhda; Boldarev, Alexey; Olkhovskaya, Olga; Sasorov, Pavel; Gasilov, Vladimir; Barber, Samuel; Gonsalves, Anthony; Schroeder, Carl; van Tilborg, Jeroen; Esarey, Eric; Leemans, Wim; Levato, Tadzio; Margarone, Daniele; Korn, Georg; Kando, Masaki; Bulanov, Sergei

2017-10-01

A novel method for asymmetric focusing of electron beams is proposed. The scheme is based on the active lensing technique, which takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside a capillary discharge are described theoretically and modeled with dissipative MHD simulations to enable analysis of capillaries of oblong rectangle cross-sections implying that large aspect ratio rectangular capillaries can be used to form flat electron bunches. The effect of the capillary cross-section on the electron beam focusing properties were studied using the analytical methods and simulation- derived magnetic field map showing the range of the capillary discharge parameters required for producing the high quality flat electron beams.

Geometries and focal properties of two electron-lens systems useful in low-energy electron or ion scattering

NASA Technical Reports Server (NTRS)

Chutjian, A.

1979-01-01

Geometries and focal properties are given for two types of electron-lens system commonly needed in electron scattering. One is an electron gun that focuses electrons from a thermionic emitter onto a fixed point (target) over a wide range of final energies. The other is an electron analyzer system that focuses scattered electrons of variable energy onto a fixed position (e.g., the entrance plane of an analyzer) at fixed energy with a zero final beam angle. Analyzer-system focusing properties are given for superelastically, elastically, and inelastically scattered electrons. Computer calculations incorporating recent accurate tube-lens focal properties are used to compute lens voltages, locations and diameters of all pupils and windows, filling factors, and asymptotic rays throughout each lens system. Focus voltages as a function of electron energy and energy change are given, and limits of operation of each system discussed. Both lens systems have been in routine use for several years, and good agreement has been consistently found between calculated and operating lens voltages.

Beam-dynamics driven design of the LHeC energy-recovery linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pellegrini, Dario; Latina, Andrea; Schulte, Daniel

The LHeC study is a possible upgrade of the LHC that aims at delivering an electron beam for collisions with the existing hadronic beams. The current baseline design for the electron facility consists of a multi-pass superconducting energy-recovery linac operating in a continuous wave mode. Here, we summarize the overall layout of such ERL complex located on the LHC site and introduce the most recent developments. We review of the lattice components, presenting their baseline design along with possible alternatives that aims at improving the overall machine performance. The detector bypass has been designed and integrated into the lattice. Trackingmore » simulations allowed us to verify the high current (~150 mA in the linacs) beam operation required for the LHeC to serve as an Higgs Factory. The impact of single and multi-bunch wake-fields, synchrotron radiation and beam-beam effects has been assessed in this paper.« less

Beam-dynamics driven design of the LHeC energy-recovery linac

DOE PAGES

Pellegrini, Dario; Latina, Andrea; Schulte, Daniel; ...

2015-12-23

The LHeC study is a possible upgrade of the LHC that aims at delivering an electron beam for collisions with the existing hadronic beams. The current baseline design for the electron facility consists of a multi-pass superconducting energy-recovery linac operating in a continuous wave mode. Here, we summarize the overall layout of such ERL complex located on the LHC site and introduce the most recent developments. We review of the lattice components, presenting their baseline design along with possible alternatives that aims at improving the overall machine performance. The detector bypass has been designed and integrated into the lattice. Trackingmore » simulations allowed us to verify the high current (~150 mA in the linacs) beam operation required for the LHeC to serve as an Higgs Factory. The impact of single and multi-bunch wake-fields, synchrotron radiation and beam-beam effects has been assessed in this paper.« less

Performance of the electronic personal dosemeter for neutron 'Saphydose-N' at different workplaces of nuclear facilities.

PubMed

Lahaye, T; Chau, Q; Ménard, S; Lacoste, V; Muller, H; Luszik-Bhadra, M; Reginatto, M; Bruguier, P

2006-01-01

This paper mainly aims at presenting the measurements and the results obtained with the electronic personal neutron dosemeter Saphydose-N at different facilities. Three campaigns were led in the frame of the European contract EVIDOS ('Evaluation of Individual Dosimetry in Mixed Neutron and Photon Radiation Fields'). The first one consisted in the measurements at the IRSN French research laboratory in reference neutron fields generated by a thermal facility (SIGMA), radionuclide ISO sources ((241)AmBe; (252)Cf; (252)Cf(D(2)O)\\Cd) and a realistic spectrum (CANEL/T400). The second one was performed at the Krümmel Nuclear Power Plant (Germany) close to the boiling water reactor and to a spent fuel transport cask. The third one was realised at Mol (Belgium), at the VENUS Research Reactor and at Belgonucléaire, a fuel processing factory.

R&D of the CEPC scintillator-tungsten ECAL

NASA Astrophysics Data System (ADS)

Dong, M. Y.

2018-03-01

The circular electron and positron collider (CEPC) was proposed as a future Higgs factory. To meet the physics requirements, a particle flow algorithm-oriented calorimeter system with high energy resolution and precise reconstruction is considered. A sampling calorimeter with scintillator-tungsten sandwich structure is selected as one of the electromagnetic calorimeter (ECAL) options due to its good performance and relatively low cost. We present the design, the test and the optimization of the scintillator module read out by silicon photomultiplier (SiPM), including the design and the development of the electronics. To estimate the performance of the scintillator and SiPM module for particles with different energy, the beam test of a mini detector prototype without tungsten shower material was performed at the E3 beams in Institute of High Energy Physics (IHEP). The results are consistent with the expectation. These studies provide a reference and promote the development of particle flow electromagnetic calorimeter for the CEPC.

Using Consumer Electronics and Apps in Industrial Environments - Development of a Framework for Dynamic Feature Deployment and Extension by Using Apps on Field Devices

NASA Astrophysics Data System (ADS)

Schmitt, Mathias

2014-12-01

The aim of this paper is to give a preliminary insight regarding the current work in the field of mobile interaction in industrial environments by using established interaction technologies and metaphors from the consumer goods industry. The major objective is the development and implementation of a holistic app-framework, which enables dynamic feature deployment and extension by using mobile apps on industrial field devices. As a result, field device functionalities can be updated and adapted effectively in accordance with well-known appconcepts from consumer electronics to comply with the urgent requirements of more flexible and changeable factory systems of the future. In addition, a much more user-friendly and utilizable interaction with field devices can be realized. Proprietary software solutions and device-stationary user interfaces can be overcome and replaced by uniform, cross-vendor solutions

A Voltammetric Electronic Tongue for the Resolution of Ternary Nitrophenol Mixtures

PubMed Central

González-Calabuig, Andreu; Cetó, Xavier

2018-01-01

This work reports the applicability of a voltammetric sensor array able to quantify the content of 2,4-dinitrophenol, 4-nitrophenol, and picric acid in artificial samples using the electronic tongue (ET) principles. The ET is based on cyclic voltammetry signals, obtained from an array of metal disk electrodes and a graphite epoxy composite electrode, compressed using discrete wavelet transform with chemometric tools such as artificial neural networks (ANNs). ANNs were employed to build the quantitative prediction model. In this manner, a set of standards based on a full factorial design, ranging from 0 to 300 mg·L−1, was prepared to build the model; afterward, the model was validated with a completely independent set of standards. The model successfully predicted the concentration of the three considered phenols with a normalized root mean square error of 0.030 and 0.076 for the training and test subsets, respectively, and r ≥ 0.948. PMID:29342848

Fourth - generation languages. Volume 2. Representative 4GLs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, J.

1986-01-01

The chapters in Part II each describe one representative product marketed by a vendor other than IBM. (Volume III of this work covers IBM languages.) The chapters in Part II cover the following 4GLs: ADS/ONLINE, APPLICATION FACTORY, DATATRIEVE, FOCUS, IDEAL, INTELLECT, MANTIS, MIMER, NATURAL, NOMAD2, RAMIS II, SYSTEM W, and USE-IT. The Perspective section of Part II presents a general overview of the product and describes its role in the marketplace. The Tutorial section describes how a user employs the language in application development.

Ergonomic analysis of safety signs: a focus of informational and cultural ergonomics.

PubMed

Cavalcanti, Janaina; Soares, Marcelo

2012-01-01

This paper presents the results of a research carried out in the states of Pernambuco and Rio Grande do Sul, Brazil about differences and similarities in the graphic representation of safety signs at factories of food, steel, shoes and construction/ building industries, together with their workers' opinions on the security signs. The overall results show differences in the sign structure across the states, confirming the influence of cultural differences on the design of safety signs, which must be taken into account during the design process.

Evaluation of the exercise intervention with the "Back School" education program in a Brazilian company of cigars: a case study.

PubMed

Ribeiro, Sânzia Bezerra; Wagmacker, Djeynefer Silveira; de Oliveira, Lilian Becerra

2012-01-01

The purpose of this study was to assess the benefits of an exercise program associated to the educational phase of the "Back School Program" in the quality of life of workers from a cigar factory. This is a case study conducted over four months with three activities a week, two times a day, with the third day devoted to educational activities, focusing on healthy lifestyle, correct posture, postural orientations, daily living and work activities, work motivation, and other issues.

"I can be happy even when I lose the game": the influence of chronic regulatory focus and primed self-construal on exergamers' mood.

PubMed

Jin, Seung-A Annie

2010-08-01

This research explored the effects of priming interdependent self-construals (collective self ) versus independent self-construals (private self ) on exergame players' mood in response to negative performance feedback. An experiment was conducted to test the interaction effects of self-construal priming as a situational factor and game players' chronic regulatory focus as an individual difference factor. To this end, the author leveraged a video-game console (Wii) and an exergame (Dance Dance Revolution) in a controlled, randomized 2 x 2 (experimental priming: interdependent self-construal vs. independent self-construal x game players' chronic promotion regulatory focus: low vs. high) between-subjects factorial design experiment (N = 58). The results of a two-way analysis of variance demonstrated the proposed interaction effect between primed self-construal and game players' chronic regulatory focus on the game players' mood in response to negative performance. The theoretical mechanism underlying the two-way interaction is explicated by regulatory focus and the primed self-construals is explicated by regulatory focus theory and two-basket theory. Practical implications for game developers and theoretical contributions to video-game research are discussed.

Congruences for central factorial numbers modulo powers of prime.

PubMed

Wang, Haiqing; Liu, Guodong

2016-01-01

Central factorial numbers are more closely related to the Stirling numbers than the other well-known special numbers, and they play a major role in a variety of branches of mathematics. In the present paper we prove some interesting congruences for central factorial numbers.

Midlands Teaching Factory, LTD.

ERIC Educational Resources Information Center

Midlands Technical Coll., Columbia, SC.

In 1987, Midlands Technical College (MTC), in Columbia, South Carolina, initiated a Computer Integrated Manufacturing (CIM) project, the Midlands Teaching Factory, LTD, which integrated various college departments with the goal of manufacturing a high quality, saleable product. The faculty developed a teaching factory model which was designed to…

Baby factories taint surrogacy in Nigeria.

PubMed

Makinde, Olusesan Ayodeji; Makinde, Olufunmbi Olukemi; Olaleye, Olalekan; Brown, Brandon; Odimegwu, Clifford O

2016-01-01

The practice of reproductive medicine in Nigeria is facing new challenges with the proliferation of 'baby factories'. Baby factories are buildings, hospitals or orphanages that have been converted into places for young girls and women to give birth to children for sale on the black market, often to infertile couples, or into trafficking rings. This practice illegally provides outcomes (children) similar to surrogacy. While surrogacy has not been well accepted in this environment, the proliferation of baby factories further threatens its acceptance. The involvement of medical and allied health workers in the operation of baby factories raises ethical concerns. The lack of a properly defined legal framework and code of practice for surrogacy makes it difficult to prosecute baby factory owners, especially when they are health workers claiming to be providing services to clients. In this environment, surrogacy and other assisted reproductive techniques urgently require regulation in order to define when ethico-legal lines have been crossed in providing surrogacy or surrogacy-like services. Copyright © 2015 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Operating a production pilot factory serving several scientific domains

NASA Astrophysics Data System (ADS)

Sfiligoi, I.; Würthwein, F.; Andrews, W.; Dost, J. M.; MacNeill, I.; McCrea, A.; Sheripon, E.; Murphy, C. W.

2011-12-01

Pilot infrastructures are becoming prominent players in the Grid environment. One of the major advantages is represented by the reduced effort required by the user communities (also known as Virtual Organizations or VOs) due to the outsourcing of the Grid interfacing services, i.e. the pilot factory, to Grid experts. One such pilot factory, based on the glideinWMS pilot infrastructure, is being operated by the Open Science Grid at University of California San Diego (UCSD). This pilot factory is serving multiple VOs from several scientific domains. Currently the three major clients are the analysis operations of the HEP experiment CMS, the community VO HCC, which serves mostly math, biology and computer science users, and the structural biology VO NEBioGrid. The UCSD glidein factory allows the served VOs to use Grid resources distributed over 150 sites in North and South America, in Europe, and in Asia. This paper presents the steps taken to create a production quality pilot factory, together with the challenges encountered along the road.

Occupational health profile of workers employed in the manufacturing sector of India.

PubMed

Suri, Shivali; Das, Ranjan

2016-01-01

The occupational health scenario of workers engaged in the manufacturing sector in India deserves attention for their safety and increasing productivity. We reviewed the status of the manufacturing sector, identified hazards faced by workers, and assessed the existing legislations and healthcare delivery mechanisms. From October 2014 to March 2015, we did a literature review by manual search of pre-identified journals, general electronic search, electronic search of dedicated websites/databases and personal communication with experts of occupational health. An estimated 115 million workers are engaged in the manufacturing sector, though the Labour Bureau takes into account only one-tenth of them who work in factories registered with the government. Most reports do not mention the human capital employed neither their quality of life, nor occupational health services available. The incidence of accidents were documented till 2011, and industry-wise break up of data is not available. Occupational hazards reported include hypertension, stress, liver disease, diabetes, tuberculosis, eye/ hearing problems, cancers, etc. We found no studies for manufacturing industries in glass, tobacco, computer and allied products, etc. The incidence of accidents is decreasing but the proportion of fatalities is increasing. Multiple legislations exist which cover occupational health, but most of these are old and have not been amended adequately to reflect the present situation. There is a shortage of manpower and occupational health statistics for dealing with surveillance, prevention and regulation in this sector. There is an urgent need of a modern occupational health legislation and an effective machinery to enforce it, preferably through intersectoral coordination between the Employees' State Insurance Corporation, factories and state governments. Occupational health should be integrated with the general health services.

Custom fractional factorial designs to develop atorvastatin self-nanoemulsifying and nanosuspension delivery systems--enhancement of oral bioavailability.

PubMed

Hashem, Fahima M; Al-Sawahli, Majid M; Nasr, Mohamed; Ahmed, Osama A A

2015-01-01

Poor water solubility of a drug is a major challenge in drug delivery research and a main cause for limited bioavailability and pharmacokinetic parameters. This work aims to utilize custom fractional factorial design to assess the development of self-nanoemulsifying drug delivery systems (SNEDDS) and solid nanosuspensions (NS) in order to enhance the oral delivery of atorvastatin (ATR). According to the design, 14 experimental runs of ATR SNEDDS were formulated utilizing the highly ATR solubilizing SNEDDS components: oleic acid, Tween 80, and propylene glycol. In addition, 12 runs of NS were formulated by the antisolvent precipitation-ultrasonication method. Optimized formulations of SNEDDS and solid NS, deduced from the design, were characterized. Optimized SNEDDS formula exhibited mean globule size of 73.5 nm, zeta potential magnitude of -24.1 mV, and 13.5 μs/cm of electrical conductivity. Optimized solid NS formula exhibited mean particle size of 260.3 nm, 7.4 mV of zeta potential, and 93.2% of yield percentage. Transmission electron microscopy showed SNEDDS droplets formula as discrete spheres. The solid NS morphology showed flaky nanoparticles with irregular shapes using scanning electron microscopy. The release behavior of the optimized SNEDDS formula showed 56.78% of cumulative ATR release after 10 minutes. Solid NS formula showed lower rate of release in the first 30 minutes. Bioavailability estimation in Wistar albino rats revealed an augmentation in ATR bioavailability, relative to ATR suspension and the commercial tablets, from optimized ATR SNEDDS and NS formulations by 193.81% and 155.31%, respectively. The findings of this work showed that the optimized nanocarriers enhance the oral delivery and pharmacokinetic profile of ATR.

Factory daughters, the family, and nuptiality in Java.

PubMed

Wolf, D L

1990-01-01

The commercialization of agriculture, increasing landlessness, and an expanding labor class in rural areas of Java are all the result of industrialization. This work discusses the effect of female employment on marriage patterns of women working in rural factories. The central point is that employment has not only increased the financial autonomy of these women, but also increased the level of control they have over the choice of marriage partners. The data set used for analysis consisted of the observations of all factory workers and all non-factory females age 15-24 located in an agricultural village. The observations were make over a 15 month period between 1981-83. A follow up visit was made in 1986 and the following conclusions were then made: 1) the village study gave detailed data, but the data set was not large enough, thus a follow up study that encompasses more people is called for; 2) young rural female factory workers are more likely to chose their marriage partners than those engaged in traditional village labor. Of those that married and worked in factories, their fertility rate was significantly lower, compared to non-factory workers. Factory workers also had different family structures, because they spent less time living in extended families because of a larger income for the couple. This study indicates that increased economic control results in increased life decision control. This changed the daughter's economic relationship with her family and gives her more control in marriage decisions.

High power linear pulsed beam annealer. [Patent application

DOEpatents

Strathman, M.D.; Sadana, D.K.; True, R.B.

1980-11-26

A high power pulsed electron beam system for annealing semiconductors is comprised of an electron gun having a heated cathode, control grid and focus ring for confining the pulsed beam of electrons to a predetermined area, and a curved drift tube. The drift tube and an annular Faraday shield between the focus ring and the drift tube are maintained at a high positive voltage with respect to the cathode to accelerate electrons passing through the focus ring, thereby eliminating space charge limitations on the emission of electrons from said gun. A coil surrounding the curved drift tube provides a magnetic field which maintains the electron beam focused about the axis of the tube. The magnetic field produced by the coil around the curved tube imparts motion to electrons in a spiral path for shallow penetration of the electrons into a target. It also produces a scalloped profile of the electron beam. A second drift tube spaced a predetermined distance from the curved tube is positioned with its axis aligned with the axis of the first drift tube. The second drift tube and the target holder are maintained at a reference voltage between the cathode voltage and the curved tube voltage to decelerate the electrons. A second coil surrounding the second drift tube, maintains the electron beam focused about the axis of the second drift tube. The magnetic field of the second coil comprises the electron beam to the area of the semiconductor on the target holder.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Igarashi, Noriyuki, E-mail: noriyuki.igarashi@kek.jp; Nitani, Hiroaki; Takeichi, Yasuo

BL-15A is a new x-ray undulator beamline at the Photon Factory. It will be dedicated to two independent research activities, simultaneous XAFS/XRF/XRD experiments, and SAXS/WAXS/GI-SAXS studies. In order to supply a choice of micro-focus, low-divergence and collimated beams, a double surface bimorph mirror was recently developed. To achieve further mirror surface optimization, the pencil beam scanning method was applied for “in-situ” beam inspection and the Inverse Matrix method was used for determination of optimal voltages on the piezoelectric actuators. The corrected beam profiles at every focal spot gave good agreement with the theoretical values and the resultant beam performance ismore » promising for both techniques. Quick and stable switching between highly focused and intense collimated beams was established using this new mirror with the simple motorized stages.« less

4th European Seminars in Virology on Oncogenic and Oncolytic Viruses, in Bertinoro (Bologna), Italy.

PubMed

Reale, Alberto; Messa, Lorenzo; Vitiello, Adriana; Loregian, Arianna; Palù, Giorgio

2017-10-01

The 4th European Seminars in Virology (EuSeV), which was focused on oncogenic and oncolytic viruses, was held in Bertinoro (Bologna), Italy, from June 10 to 12, 2016. This article summarizes the plenary lectures and aims to illustrate the main topics discussed at 4th EuSeV, which brought together knowledge and expertise in the field of oncogenic and oncolytic viruses from all over the world. The meeting was divided in two parts, "Mechanisms of Viral Oncogenesis" and "Viral Oncolysis and Immunotherapy," which were both focused on dissecting the complex and multi-factorial interplay between cancer and human viruses and on exploring new anti-cancer strategies. J. Cell. Physiol. 232: 2641-2648, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

27 CFR 40.47 - Other businesses within factory.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Other businesses within... AND TUBES, AND PROCESSED TOBACCO Administrative Provisions § 40.47 Other businesses within factory. (a) General. The appropriate TTB officer may authorize such other businesses within the factory of a...

27 CFR 40.47 - Other businesses within factory.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Other businesses within... AND TUBES, AND PROCESSED TOBACCO Administrative Provisions § 40.47 Other businesses within factory. (a) General. The appropriate TTB officer may authorize such other businesses within the factory of a...

EDITORIAL: Laser and plasma accelerators Laser and plasma accelerators

NASA Astrophysics Data System (ADS)

Bingham, Robert

2009-02-01

This special issue on laser and plasma accelerators illustrates the rapid advancement and diverse applications of laser and plasma accelerators. Plasma is an attractive medium for particle acceleration because of the high electric field it can sustain, with studies of acceleration processes remaining one of the most important areas of research in both laboratory and astrophysical plasmas. The rapid advance in laser and accelerator technology has led to the development of terawatt and petawatt laser systems with ultra-high intensities and short sub-picosecond pulses, which are used to generate wakefields in plasma. Recent successes include the demonstration by several groups in 2004 of quasi-monoenergetic electron beams by wakefields in the bubble regime with the GeV energy barrier being reached in 2006, and the energy doubling of the SLAC high-energy electron beam from 42 to 85 GeV. The electron beams generated by the laser plasma driven wakefields have good spatial quality with energies ranging from MeV to GeV. A unique feature is that they are ultra-short bunches with simulations showing that they can be as short as a few femtoseconds with low-energy spread, making these beams ideal for a variety of applications ranging from novel high-brightness radiation sources for medicine, material science and ultrafast time-resolved radiobiology or chemistry. Laser driven ion acceleration experiments have also made significant advances over the last few years with applications in laser fusion, nuclear physics and medicine. Attention is focused on the possibility of producing quasi-mono-energetic ions with energies ranging from hundreds of MeV to GeV per nucleon. New acceleration mechanisms are being studied, including ion acceleration from ultra-thin foils and direct laser acceleration. The application of wakefields or beat waves in other areas of science such as astrophysics and particle physics is beginning to take off, such as the study of cosmic accelerators considered by Chen et al where the driver, instead of being a laser, is a whistler wave known as the magnetowave plasma accelerator. The application to electron--positron plasmas that are found around pulsars is studied in the paper by Shukla, and to muon acceleration by Peano et al. Electron wakefield experiments are now concentrating on control and optimisation of high-quality beams that can be used as drivers for novel radiation sources. Studies by Thomas et al show that filamentation has a deleterious effect on the production of high quality mono-energetic electron beams and is caused by non-optimal choice of focusing geometry and/or electron density. It is crucial to match the focusing with the right plasma parameters and new types of plasma channels are being developed, such as the magnetically controlled plasma waveguide reported by Froula et al. The magnetic field provides a pressure profile shaping the channel to match the guiding conditions of the incident laser, resulting in predicted electron energies of 3GeV. In the forced laser-wakefield experiment Fang et al show that pump depletion reduces or inhibits the acceleration of electrons. One of the earlier laser acceleration concepts known as the beat wave may be revived due to the work by Kalmykov et al who report on all-optical control of nonlinear focusing of laser beams, allowing for stable propagation over several Rayleigh lengths with pre-injected electrons accelerated beyond 100 MeV. With the increasing number of petawatt lasers, attention is being focused on different acceleration regimes such as stochastic acceleration by counterpropagating laser pulses, the relativistic mirror, or the snow-plough effect leading to single-step acceleration reported by Mendonca. During wakefield acceleration the leading edge of the pulse undergoes frequency downshifting and head erosion as the laser energy is transferred to the wake while the trailing edge of the laser pulse undergoes frequency up-shift. This is commonly known as photon deceleration and acceleration and is the result of a modulational instability. Simulations reported by Trines et al using a photon-in-cell code or wave kinetic code agree extremely well with experimental observation. Ion acceleration is actively studied; for example the papers by Robinson, Macchi, Marita and Tripathi all discuss different types of acceleration mechanisms from direct laser acceleration, Coulombic explosion and double layers. Ion acceleration is an exciting development that may have great promise in oncology. The surprising application is in muon acceleration, demonstrated by Peano et al who show that counterpropagating laser beams with variable frequencies drive a beat structure with variable phase velocity, leading to particle trapping and acceleration with possible application to a future muon collider and neutrino factory. Laser and plasma accelerators remain one of the exciting areas of plasma physics with applications in many areas of science ranging from laser fusion, novel high-brightness radiation sources, particle physics and medicine. The guest editor would like to thank all authors and referees for their invaluable contributions to this special issue.

Building America Industrialized Housing Partnership (BAIHP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

McIlvaine, Janet; Chandra, Subrato; Barkaszi, Stephen

This final report summarizes the work conducted by the Building America Industrialized Housing Partnership (www.baihp.org) for the period 9/1/99-6/30/06. BAIHP is led by the Florida Solar Energy Center of the University of Central Florida and focuses on factory built housing. In partnership with over 50 factory and site builders, work was performed in two main areas--research and technical assistance. In the research area--through site visits in over 75 problem homes, we discovered the prime causes of moisture problems in some manufactured homes and our industry partners adopted our solutions to nearly eliminate this vexing problem. Through testing conducted in overmore » two dozen housing factories of six factory builders we documented the value of leak free duct design and construction which was embraced by our industry partners and implemented in all the thousands of homes they built. Through laboratory test facilities and measurements in real homes we documented the merits of 'cool roof' technologies and developed an innovative night sky radiative cooling concept currently being tested. We patented an energy efficient condenser fan design, documented energy efficient home retrofit strategies after hurricane damage, developed improved specifications for federal procurement for future temporary housing, compared the Building America benchmark to HERS Index and IECC 2006, developed a toolkit for improving the accuracy and speed of benchmark calculations, monitored the field performance of over a dozen prototype homes and initiated research on the effectiveness of occupancy feedback in reducing household energy use. In the technical assistance area we provided systems engineering analysis, conducted training, testing and commissioning that have resulted in over 128,000 factory built and over 5,000 site built homes which are saving their owners over $17,000,000 annually in energy bills. These include homes built by Palm Harbor Homes, Fleetwood, Southern Energy Homes, Cavalier and the manufacturers participating in the Northwest Energy Efficient Manufactured Home program. We worked with over two dozen Habitat for Humanity affiliates and helped them build over 700 Energy Star or near Energy Star homes. We have provided technical assistance to several show homes constructed for the International builders show in Orlando, FL and assisted with other prototype homes in cold climates that save 40% over the benchmark reference. In the Gainesville Fl area we have several builders that are consistently producing 15 to 30 homes per month in several subdivisions that meet the 30% benchmark savings goal. We have contributed to the 2006 DOE Joule goals by providing two community case studies meeting the 30% benchmark goal in marine climates.« less

Trends for Electron Beam Accelerator Applications in Industry

NASA Astrophysics Data System (ADS)

Machi, Sueo

2011-02-01

Electron beam (EB) accelerators are major pieces of industrial equipment used for many commercial radiation processing applications. The industrial use of EB accelerators has a history of more than 50 years and is still growing in terms of both its economic scale and new applications. Major applications involve the modification of polymeric materials to create value-added products, such as heat-resistant wires, heat-shrinkable sheets, automobile tires, foamed plastics, battery separators and hydrogel wound dressing. The surface curing of coatings and printing inks is a growing application for low energy electron accelerators, resulting in an environmentally friendly and an energy-saving process. Recently there has been the acceptance of the use of EB accelerators in lieu of the radioactive isotope cobalt-60 as a source for sterilizing disposable medical products. Environmental protection by the use of EB accelerators is a new and important field of application. A commercial plant for the cleaning flue gases from a coal-burning power plant is in operation in Poland, employing high power EB accelerators. In Korea, a commercial plant uses EB to clean waste water from a dye factory.

Gravitational waves from dark first order phase transitions and dark photons

NASA Astrophysics Data System (ADS)

Addazi, Andrea; Marcianò, Antonino

2018-01-01

Cold Dark Matter particles may interact with ordinary particles through a dark photon, which acquires a mass thanks to a spontaneous symmetry breaking mechanism. We discuss a dark photon model in which the scalar singlet associated to the spontaneous symmetry breaking has an effective potential that induces a first order phase transition in the early Universe. Such a scenario provides a rich phenomenology for electron-positron colliders and gravitational waves interferometers, and may be tested in several different channels. The hidden first order phase transition implies the emission of gravitational waves signals, which may constrain the dark photon’s space of parameters. Compared limits from electron-positron colliders, astrophysics, cosmology and future gravitational waves interferometers such as eLISA, U-DECIGO and BBO are discussed. This highly motivates a cross-checking strategy of data arising from experiments dedicated to gravitational waves, meson factories, the International Linear Collider (ILC), the Circular Electron Positron Collider (CEPC) and other underground direct detection experiments of cold dark matter candidates. Supported by the Shanghai Municipality (KBH1512299) and Fudan University (JJH1512105)

A rapid biochemical test to assess postharvest deterioration of sugarcane and milled juice

USDA-ARS?s Scientific Manuscript database

The delivery of consignments of deteriorated sugarcane to factories can detrimentally affect multiple process units, and even lead to a factory shut-down. An enzymatic factory method was used to measure mannitol, a major degradation product of sugarcane Leuconostoc deterioration in the U.S., in pre...

Factorial versus Typological Models: A Comparison of Methods for Personality Data

ERIC Educational Resources Information Center

von Davier, Matthias; Naemi, Bobby; Roberts, Richard D.

2012-01-01

This article describes an exploration of the distinction between typological and factorial latent variables in the domain of personality theory. Traditionally, many personality variables have been considered to be factorial in nature, even though there are examples of typological constructs dating back to Hippocrates. Recently, some…

A community-initiated study of blood lead levels of Nicaraguan children living near a battery factory.

PubMed Central

Morales Bonilla, C; Mauss, E A

1998-01-01

OBJECTIVES: In response to requests by parents in Managua, Nicaragua, whose neighborhood borders a battery factory, 97 children were tested for blood lead, as were 30 children in a neighborhood without an obvious source of environmental lead. METHODS: Venous blood was examined by atomic absorption spectrophotometry. Educational workshops were conducted. RESULTS: Mean blood lead levels were 17.21 +/- 9.92 micrograms/dL in the index children and 7.40 +/- 5.37 micrograms/dL in the controls (P < .001). CONCLUSIONS: Children living near the battery factory are at increased risk of lead poisoning. The parents were able to petition the government to control the factory emissions and to improve appropriate health services. The factory is now closed. PMID:9842385

Acoustic scale modelling of factories, part II: 1-50 Cale model investigations of factory sound fields

NASA Astrophysics Data System (ADS)

Hodgson, M. R.; Orlowski, R. J.

1987-03-01

In this second part of a report on factory scale modelling use of a 1:50 scale variable model as a research tool is described. Details of the model are presented. The results of measurements of reverberation time and sound propagation, made in various model configurations, are used to investigate the main factors influencing factory sound fields, and the applicability of the Sabine theory to factories. The parameters investigated are the enclosure geometry (aspect ratio, volume and roof pitch), surface absorption and fittings (density, size, surface area, vertical distribution and specific types). Despite certain limitations and uncertainties resulting, for example, from surprising results associated with surface absorption, models are shown to be effective research tools. The inapplicability of the Sabine theory is confirmed and elucidated.

Implementing Clinical Research Using Factorial Designs: A Primer.

PubMed

Baker, Timothy B; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Fiore, Michael C; Piper, Megan E; Collins, Linda M

2017-07-01

Factorial experiments have rarely been used in the development or evaluation of clinical interventions. However, factorial designs offer advantages over randomized controlled trial designs, the latter being much more frequently used in such research. Factorial designs are highly efficient (permitting evaluation of multiple intervention components with good statistical power) and present the opportunity to detect interactions amongst intervention components. Such advantages have led methodologists to advocate for the greater use of factorial designs in research on clinical interventions (Collins, Dziak, & Li, 2009). However, researchers considering the use of such designs in clinical research face a series of choices that have consequential implications for the interpretability and value of the experimental results. These choices include: whether to use a factorial design, selection of the number and type of factors to include, how to address the compatibility of the different factors included, whether and how to avoid confounds between the type and number of interventions a participant receives, and how to interpret interactions. The use of factorial designs in clinical intervention research poses choices that differ from those typically considered in randomized clinical trial designs. However, the great information yield of the former encourages clinical researchers' increased and careful execution of such designs. Copyright © 2017. Published by Elsevier Ltd.

"Mixing" as an ethnoetiology of HIV/AIDS in Malaysia's multinational factories.

PubMed

Root, Robin

2006-09-01

Minah Karan, the stigmatizing label appended to Malay factory women in the 1980s, signaled a dangerous female sexuality that risked spreading beyond the factory gates and infecting Malaysia's idea(l)s of its traditional kampung culture. This article narrates how Minah Karan, as the former antihero of development, was reconstituted in the 1990s, with the government's labeling of factories as "high-risk settings" for HIV/AIDS. This is an ethnoetiology based not on any evidential epidemiological data but on the racial and gendered "mixing" that transpires behind factory walls: a fear that the "mixing of the sexes" means ipso facto "sexual mixing" among the races. The article demonstrates how importation of the high-risk label articulates at the local level the new and contested linkages, economic, religious, and scientific, constitutive of globalization. The pragmatic nature and imperatives of this high-risk process are discerned in factory women's accounts of how they negotiate the interactional imperatives of factory work, because transnational structures of productivity violate the social boundaries that have long connoted political stability, moral integrity, ethnic community, and individual safety. The article concludes by questioning whether ethnoetiologies, especially when they concern sexual networks, become social etiologies, because this would locate ethnoetiologies as central to conventional public health praxis rather than as ethnographic exotica in the margins.

Three-Dimensional Electron Optics Model Developed for Traveling-Wave Tubes

NASA Technical Reports Server (NTRS)

Kory, Carol L.

2000-01-01

A three-dimensional traveling-wave tube (TWT) electron beam optics model including periodic permanent magnet (PPM) focusing has been developed at the NASA Glenn Research Center at Lewis Field. This accurate model allows a TWT designer to develop a focusing structure while reducing the expensive and time-consuming task of building the TWT and hot-testing it (with the electron beam). In addition, the model allows, for the first time, an investigation of the effect on TWT operation of the important azimuthally asymmetric features of the focusing stack. The TWT is a vacuum device that amplifies signals by transferring energy from an electron beam to a radiofrequency (RF) signal. A critically important component is the focusing structure, which keeps the electron beam from diverging and intercepting the RF slow wave circuit. Such an interception can result in excessive circuit heating and decreased efficiency, whereas excessive growth in the beam diameter can lead to backward wave oscillations and premature saturation, indicating a serious reduction in tube performance. The most commonly used focusing structure is the PPM stack, which consists of a sequence of cylindrical iron pole pieces and opposite-polarity magnets. Typically, two-dimensional electron optics codes are used in the design of magnetic focusing devices. In general, these codes track the beam from the gun downstream by solving equations of motion for the electron beam in static-electric and magnetic fields in an azimuthally symmetric structure. Because these two-dimensional codes cannot adequately simulate a number of important effects, the simulation code MAFIA (solution of Maxwell's equations by the Finite-Integration-Algorithm) was used at Glenn to develop a three-dimensional electron optics model. First, a PPM stack was modeled in three dimensions. Then, the fields obtained using the magnetostatic solver were loaded into a particle-in-cell solver where the fully three-dimensional behavior of the beam was simulated in the magnetic focusing field. For the first time, the effects of azimuthally asymmetric designs and critical azimuthally asymmetric characteristics of the focusing stack (such as shunts, C-magnets, or magnet misalignment) on electron beam behavior have been investigated. A cutaway portion of a simulated electron beam focused by a PPM stack is illustrated.

Exotic decays of the 125 GeV Higgs boson at future e +e – colliders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Zhen; Wang, Lian -Tao; Zhang, Hao

Discovery of unexpected properties of the Higgs boson offers an intriguing opportunity of shedding light on some of the most profound puzzles in particle physics. The Beyond Standard Model (BSM) decays of the Higgs boson could reveal new physics in a direct manner. Future electron-positron lepton colliders operating as Higgs factories, including CEPC, FCC-ee and ILC, with the advantages of a clean collider environment and large statistics, could greatly enhance the sensitivity in searching for these BSM decays. In this work, we perform a general study of Higgs exotic decays at futuremore » $e^+e^-$ lepton colliders, focusing on the Higgs decays with hadronic final states and/or missing energy, which are very challenging for the High-Luminosity program of the Large Hadron Collider (HL-LHC). We show that with simple selection cuts, $$O(10^{-3}\\sim10^{-5})$$ limits on the Higgs exotic decay branching fractions can be achieved using the leptonic decaying spectator $Z$ boson in the associated production mode $$e^+e^-\\rightarrow Z H$$. We further discuss the interplay between the detector performance and Higgs exotic decay, and other possibilities of exotic decays. Finally, our work is a first step in a comprehensive study of Higgs exotic decays at future lepton colliders, which is a key ingredient of Higgs physics that deserves further investigation.« less

Exotic decays of the 125 GeV Higgs boson at future e +e – colliders

DOE PAGES

Liu, Zhen; Wang, Lian -Tao; Zhang, Hao

2017-06-01

Discovery of unexpected properties of the Higgs boson offers an intriguing opportunity of shedding light on some of the most profound puzzles in particle physics. The Beyond Standard Model (BSM) decays of the Higgs boson could reveal new physics in a direct manner. Future electron-positron lepton colliders operating as Higgs factories, including CEPC, FCC-ee and ILC, with the advantages of a clean collider environment and large statistics, could greatly enhance the sensitivity in searching for these BSM decays. In this work, we perform a general study of Higgs exotic decays at futuremore » $e^+e^-$ lepton colliders, focusing on the Higgs decays with hadronic final states and/or missing energy, which are very challenging for the High-Luminosity program of the Large Hadron Collider (HL-LHC). We show that with simple selection cuts, $$O(10^{-3}\\sim10^{-5})$$ limits on the Higgs exotic decay branching fractions can be achieved using the leptonic decaying spectator $Z$ boson in the associated production mode $$e^+e^-\\rightarrow Z H$$. We further discuss the interplay between the detector performance and Higgs exotic decay, and other possibilities of exotic decays. Finally, our work is a first step in a comprehensive study of Higgs exotic decays at future lepton colliders, which is a key ingredient of Higgs physics that deserves further investigation.« less

Predictors of monoterpene exposure in the Danish furniture industry.

PubMed

Hagström, Katja; Jacobsen, Gitte; Sigsgaard, Torben; Schaumburg, Inger; Erlandsen, Mogens; Schlunssen, Vivi

2012-04-01

Individuals who work with pine in the furniture industry may be exposed to monoterpenes, the most abundant of which are α-pinene, β-pinene, and Δ(3)-carene. Monoterpenes are suspected to cause dermatitis and to harm the respiratory system. An understanding of the predictors of monoterpene exposure is therefore important in preventing these adverse effects. These predictors may include general characteristics of the work environment and specific work operations. We sought to assess the extent to which workers are exposed to monoterpenes and to identify possible predictors of monoterpene exposure in the pine furniture industry in Denmark. Passive measurements of the levels of selected monoterpenes (α-pinene, β-pinene, and Δ(3)-carene) were performed on 161 subjects from 17 pine furniture factories in Viborg County, Denmark; one sample was acquired from each worker. Additionally, wood dust samples were collected from 145 workers. Data on potential predictors of exposure were acquired over the course of the day on which the exposure measurements were recorded and could be assigned to one of four hierarchic ordered levels: worker, machine, department, and factory. In addition to univariate analyses, a mixed model was used to account for imbalances within the data and random variation with each of the hierarchically ordered levels. The geometric mean (GM) monoterpene content observed over the 161 measurements was 7.8 mg m(-3) [geometric standard deviation (GSD): 2.4]; the GM wood dust level over 145 measurements was 0.58 mg m(-3) (GSD: 1.49). None of the measured samples exceeded the occupational exposure limit for terpenes in Denmark (25 ppm, 150 mg m(-3)). In the univariate analyses, half of the predictors tested were found to be significant; the multivariate model indicated that only three of the potential predictors were significant. These were the recirculation of air in rooms used for the processing of wood (a factory level predictor), the presence of a supplementary cold air intake (departmental level), and the operation of a glue press (machine level). However, only one factory of the 17 examined used a supplementary cold air intake, and while very high monoterpene levels were observed there, this may be due to factors other than the supplementary intake. In contrast to the situation with wood dust, we found that the bulk of the variation in the data (65%) was attributable to variability on the factory level, with comparatively little being due to the departmental (16%) and machine (0.5%) levels. The fixed terms in the model accounted for 31.8% of the total variance. The predictors of monoterpenes are not the same as those for wood dust exposure; this has implications for the implementation of preventative measures in factories. In order to decrease monoterpene exposure, efforts should be focused on minimizing the recirculation of air in rooms used for woodworking and on increasing awareness of the importance of effective ventilation and enclosure when operating a glue press.

The EB Factory: Fundamental Stellar Astrophysics with Eclipsing Binary Stars Discovered by Kepler

NASA Astrophysics Data System (ADS)

Stassun, Keivan

Eclipsing binaries (EBs) are key laboratories for determining the fundamental properties of stars. EBs are therefore foundational objects for constraining stellar evolution models, which in turn are central to determinations of stellar mass functions, of exoplanet properties, and many other areas. The primary goal of this proposal is to mine the Kepler mission light curves for: (1) EBs that include a subgiant star, from which precise ages can be derived and which can thus serve as critically needed age benchmarks; and within these, (2) long-period EBs that include low-mass M stars or brown dwarfs, which are increa-singly becoming the focus of exoplanet searches, but for which there are the fewest available fundamental mass- radius-age benchmarks. A secondary goal of this proposal is to develop an end-to-end computational pipeline -- the Kepler EB Factory -- that allows automatic processing of Kepler light curves for EBs, from period finding, to object classification, to determination of EB physical properties for the most scientifically interesting EBs, and finally to accurate modeling of these EBs for detailed tests and benchmarking of theoretical stellar evolution models. We will integrate the most successful algorithms into a single, cohesive workflow environment, and apply this 'Kepler EB Factory' to the full public Kepler dataset to find and characterize new "benchmark grade" EBs, and will disseminate both the enhanced data products from this pipeline and the pipeline itself to the broader NASA science community. The proposed work responds directly to two of the defined Research Areas of the NASA Astrophysics Data Analysis Program (ADAP), specifically Research Area #2 (Stellar Astrophysics) and Research Area #9 (Astrophysical Databases). To be clear, our primary goal is the fundamental stellar astrophysics that will be enabled by the discovery and analysis of relatively rare, benchmark-grade EBs in the Kepler dataset. At the same time, to enable this goal will require bringing a suite of extant and new custom algorithms to bear on the Kepler data, and thus our development of the Kepler EB Factory represents a value-added product that will allow the widest scientific impact of the in-formation locked within the vast reservoir of the Kepler light curves.

Recovery of yttrium from fluorescent powder of cathode ray tube, CRT: Zn removal by sulphide precipitation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Innocenzi, Valentina, E-mail: valentina.innocenzi1@univaq.it; De Michelis, Ida; Ferella, Francesco

2013-11-15

Highlights: • Treatment of fluorescent powder of CRT waste. • Factorial experimental designs to study acid leaching of fluorescent powder and the purification of leach liquors. • Recover of yttrium by precipitation using oxalic acid. • Suitable flowsheet to recover yttrium from fluorescent powder. - Abstract: This work is focused on the recovery of yttrium and zinc from fluorescent powder of cathode ray tube (CRT). Metals are extracted by sulphuric acid in the presence of hydrogen peroxide. Leaching tests are carried out according to a 2{sup 2} full factorial plan and the highest extraction yields for yttrium and zinc equalmore » to 100% are observed under the following conditions: 3 M of sulphuric acid, 10% v/v of H{sub 2}O{sub 2} concentrated solution at 30% v/v, 10% w/w pulp density, 70 °C and 3 h of reaction. Two series of precipitation tests for zinc are carried out: a 2{sup 2} full factorial design and a completely randomized factorial design. In these series the factors investigated are pH of solution during the precipitation and the amount of sodium sulphide added to precipitate zinc sulphide. The data of these tests are used to describe two empirical mathematical models for zinc and yttrium precipitation yields by regression analysis. The highest precipitation yields for zinc are obtained under the following conditions: pH equal to 2–2.5% and 10–12% v/v of Na{sub 2}S concentrated solution at 10% w/v. In these conditions the coprecipitation of yttrium is of 15–20%. Finally further yttrium precipitation experiments by oxalic acid on the residual solutions, after removing of zinc, show that yttrium could be recovered and calcined to obtain the final product as yttrium oxide. The achieved results allow to propose a CRT recycling process based on leaching of fluorescent powder from cathode ray tube and recovery of yttrium oxide after removing of zinc by precipitation. The final recovery of yttrium is 75–80%.« less

LASER APPLICATIONS AND OTHER TOPICS IN QUANTUM ELECTRONICS: Electron beam deflection, focusing, and collimation by a femtosecond laser lens

NASA Astrophysics Data System (ADS)

Minogin, V. G.

2009-11-01

This work examines spatial separation of femtosecond electron bunches using the ponderomotive potential created by femtosecond laser pulses. It is shown that ponderomotive optical potentials are capable of effectively deflecting, focusing, and collimating narrow femtosecond electron bunches.

Design, analysis and presentation of factorial randomised controlled trials

PubMed Central

Montgomery, Alan A; Peters, Tim J; Little, Paul

2003-01-01

Background The evaluation of more than one intervention in the same randomised controlled trial can be achieved using a parallel group design. However this requires increased sample size and can be inefficient, especially if there is also interest in considering combinations of the interventions. An alternative may be a factorial trial, where for two interventions participants are allocated to receive neither intervention, one or the other, or both. Factorial trials require special considerations, however, particularly at the design and analysis stages. Discussion Using a 2 × 2 factorial trial as an example, we present a number of issues that should be considered when planning a factorial trial. The main design issue is that of sample size. Factorial trials are most often powered to detect the main effects of interventions, since adequate power to detect plausible interactions requires greatly increased sample sizes. The main analytical issues relate to the investigation of main effects and the interaction between the interventions in appropriate regression models. Presentation of results should reflect the analytical strategy with an emphasis on the principal research questions. We also give an example of how baseline and follow-up data should be presented. Lastly, we discuss the implications of the design, analytical and presentational issues covered. Summary Difficulties in interpreting the results of factorial trials if an influential interaction is observed is the cost of the potential for efficient, simultaneous consideration of two or more interventions. Factorial trials can in principle be designed to have adequate power to detect realistic interactions, and in any case they are the only design that allows such effects to be investigated. PMID:14633287

A Survey of the Medical Needs of a Group of Small Factories*

PubMed Central

Lee, W. R.

1962-01-01

The present interest in medical services for small factories is matched by the limited objective information which is available on the demand for and needs of such services. As a teaching project, a survey was made of factories with between 30 and 200 employees on an estate in the North West where there was no organized medical service. Unfortunately, time allowed only 22 factories to be visited. The findings, therefore, are regarded as indicative rather than conclusive, but this does not detract from their interest. Factories were visited by two or three postgraduate students who completed a questionnaire designed to standardize their findings. The questionnaire is included as an appendix to this paper. Regarding the demand for medical services, four of the 22 factories were subsidiaries of larger organizations and had part-time medical advice, 14 expressed no interest even if this would have involved no financial commitment, and the remaining four were interested for differing reasons. The needs of the factories in this context were found to be, first, advice and perhaps better supervision of non-mechanical hazards and, secondly, supervision of the first aid arrangements. From the ambulance journey records of the local authority there appeared to be no great demand for local casualty facilities. To meet these needs it is suggested that the functions of the appointed factory doctor might be modified to include wider supervision of non-mechanical hazards and supervision of first aid arrangements. It is also suggested that the National Health Service should form the basis for dealing with those cases requiring more than first aid. PMID:14463582

Focusing Electron Beams at SLAC.

ERIC Educational Resources Information Center

Taylor, Richard L.

1993-01-01

Describes the development of a set of magnets that focus high-energy electron and positron beams causing them to collide, annihilate each other, and generate new particles. Explains how dipoles bend the beam, how quadrupoles focus the beam, how the focal length is calculated, and the superconducting final focus. (MDH)

Construction and reliability of the Japanese version of the Adolescent Egocentrism-Sociocentrism (AES) scale and its preliminary application in the Japanese university students.

PubMed

Yamamoto, Mayumi; Tomotake, Masahito; Ohmori, Tetsuro

2008-08-01

In recent years, the problem of interpersonal relationships has been reported to be associated with various adolescent psychiatric problems. Egocentrism is one factor related to the problem of interpersonal relationships. The Adolescent Egocentrism-Sociocentrism (AES) scale is used to assess egocentrism in Western countries, but no such scale has been developed in Japan. The purpose of our current study was to develop the Japanese version of the AES scale and investigate the relationship between the egocentrism assessed by the AES scale and the self-consciousness assessed by the Japanese version of the self-consciousness scale. The original version of the AES scale was first translated into Japanese using the forward-backward method and examined for factorial reliability and validity. The results demonstrated that the Japanese version of the AES scale shows adequate factorial reliability and validity, but different from the original version the "egocentrism personal fable" subscale which measures the feeling that oneself is special and unique was not extracted in the Japanese version. We found a moderate correlation between the non-social focuses of the AES scale and the public self-consciousness subscale of the self-consciousness scale. This correlation suggests that a strong attention of others' view on oneself results in the avoidance of others. The Japanese version of the AES scale can examine egocentrism adequately together with sociocentrism and non-social focuses. As this scale is self-reporting and easy to complete, it may have practical utility in a clinical setting.

Advanced Envelope Research for Factory Built Housing, Phase 3. Design Development and Prototyping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Kessler, B.; Mullens, M.

2014-01-01

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet themore » thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research -- stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.« less

Advanced Envelope Research for Factory Built Housing, Phase 3 -- Design Development and Prototyping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Kessler, B.; Mullens, M.

2014-01-01

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet themore » thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research -- stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.« less

Stud Walls With Continuous Exterior Insulation for Factory Built Housing: New York, New York (Fact Sheet), NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet themore » thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research - stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.« less

Technology Solutions Case Study: Stud Walls with Continuous Exterior Insulation for Factory Built Housing

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet themore » thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research — stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.« less

Students Tackle Academics in Practical Context at Skateboard Factory

ERIC Educational Resources Information Center

Pearson, George

2012-01-01

High school student Nick Robertson came to Oasis Skateboard Factory (OSF) from a suburban Toronto district. He was surfing the web when he spotted a reference to Oasis Skateboard Factory, an alternative program in the Toronto District School Board. He says his first reaction was "Skateboards in school? It didn't seem possible." He…

Muon Accelerator Program (MAP) | Homepage

Science.gov Websites

collider and neutrino factory Scientists around the world are developing the technologies necessary for a factory or a muon collider. Read more: Neutrino factory Muon collider Developing a muon source One of the developing and testing RF cavities and magnets for a muon beamline. The facility allows scientists to test

37. NORTH TO BINS ALONG NORTH WALL OF FACTORY BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. NORTH TO BINS ALONG NORTH WALL OF FACTORY BUILDING WHICH REMAIN FILLED WITH NEW OLD STOCK AND USED PARTS FOR ELI WINDMILLS. THE ROPE AT THE LOWER FOREGROUND WAS USED IN ERECTING WINDMILLS AND TOWERS FOR CUSTOMERS. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

The first use of a HPLC system at a Louisiana Sugarcane Factory: What it can do for you

USDA-ARS?s Scientific Manuscript database

Alma Plantation sugarcane factory established and operated the first High Performance Liquid Chromatography (HPLC) system in Louisiana in 2015. Although many HPLC systems exist, the factory opted for a ThermoFisherTM ion chromatography (anion exchange) system with integrated pulsed amperometric det...

Factory-Calibrated Continuous Glucose Sensors: The Science Behind the Technology.

PubMed

Hoss, Udo; Budiman, Erwin Satrya

2017-05-01

The use of commercially available continuous glucose monitors for diabetes management requires sensor calibrations, which until recently are exclusively performed by the patient. A new development is the implementation of factory calibration for subcutaneous glucose sensors, which eliminates the need for user calibrations and the associated blood glucose tests. Factory calibration means that the calibration process is part of the sensor manufacturing process and performed under controlled laboratory conditions. The ability to move from a user calibration to factory calibration is based on several technical requirements related to sensor stability and the robustness of the sensor manufacturing process. The main advantages of factory calibration over the conventional user calibration are: (a) more convenience for the user, since no more fingersticks are required for calibration and (b) elimination of use errors related to the execution of the calibration process, which can lead to sensor inaccuracies. The FreeStyle Libre ™ and FreeStyle Libre Pro ™ flash continuous glucose monitoring systems are the first commercially available sensor systems using factory-calibrated sensors. For these sensor systems, no user calibrations are required throughout the sensor wear duration.

Incense and joss stick making in small household factories, Thailand.

PubMed

Siripanich, S; Siriwong, W; Keawrueang, P; Borjan, M; Robson, M

2014-07-01

Incense and joss stick are generally used in the world. Most products were made in small household factories. There are many environmental and occupational hazards in these factories. To evaluate the workplace environmental and occupational hazards in small household incense and joss stick factories in Roi-Et, Thailand. Nine small household factories in rural areas of Roi-Et, Thailand, were studied. Dust concentration and small aerosol particles were counted through real time exposure monitoring. The inductively coupled plasma optical emission spectrometry (ICP-OES) was used for quantitative measurement of heavy metal residue in incense products. Several heavy metals were found in dissolved dye and joss sticks. Those included barium, manganese, and lead. Rolling and shaking processes produced the highest concentration of dust and aerosols. Only 3.9% of female workers used personal protection equipment. Dust and chemicals were major threats in small household incense and joss stick factories in Thailand. Increasing awareness towards using personal protection equipment and emphasis on elimination of environmental workplace hazards should be considered to help the workers of this industry.

Entrepreneurship Education through Industrial Internship for Technical and Vocational Students

NASA Astrophysics Data System (ADS)

Sumual, H.; Soputan, G. J.

2018-02-01

The spirit of entrepreneurship must be formed in an integrated process in learning so that commitment, responsibility and work ethic on the candidate of vocational high school graduates are effectively promoted. Learning teaching factory teaches students how to find problems, build prototypes, learn to make business plan, and learn to present their own solutions. The research objective is to assess the effectiveness of Teaching Factory implementation in improving the competence and skills of students in the field of entrepreneurship. The method used in this research is case study. Key informants were determined purposively in charge of teaching factory, students, and teachers who teach in productive subject. The results achieved in this study are: 1) culinary and hospitality units are the most active groups in producing products for teaching factory, 2) the role of entrepreneurial groups in each unit of production in order to increase productivity 3) students earn revenues of teaching factory and production unit get percentage of product or service sales, 3) the role of each production unit determines the level of teaching factory effectiveness.

Design of Experiments with Multiple Independent Variables: A Resource Management Perspective on Complete and Reduced Factorial Designs

PubMed Central

Collins, Linda M.; Dziak, John J.; Li, Runze

2009-01-01

An investigator who plans to conduct experiments with multiple independent variables must decide whether to use a complete or reduced factorial design. This article advocates a resource management perspective on making this decision, in which the investigator seeks a strategic balance between service to scientific objectives and economy. Considerations in making design decisions include whether research questions are framed as main effects or simple effects; whether and which effects are aliased (confounded) in a particular design; the number of experimental conditions that must be implemented in a particular design and the number of experimental subjects the design requires to maintain the desired level of statistical power; and the costs associated with implementing experimental conditions and obtaining experimental subjects. In this article four design options are compared: complete factorial, individual experiments, single factor, and fractional factorial designs. Complete and fractional factorial designs and single factor designs are generally more economical than conducting individual experiments on each factor. Although relatively unfamiliar to behavioral scientists, fractional factorial designs merit serious consideration because of their economy and versatility. PMID:19719358

Quantum computation with realistic magic-state factories

NASA Astrophysics Data System (ADS)

O'Gorman, Joe; Campbell, Earl T.

2017-03-01

Leading approaches to fault-tolerant quantum computation dedicate a significant portion of the hardware to computational factories that churn out high-fidelity ancillas called magic states. Consequently, efficient and realistic factory design is of paramount importance. Here we present the most detailed resource assessment to date of magic-state factories within a surface code quantum computer, along the way introducing a number of techniques. We show that the block codes of Bravyi and Haah [Phys. Rev. A 86, 052329 (2012), 10.1103/PhysRevA.86.052329] have been systematically undervalued; we track correlated errors both numerically and analytically, providing fidelity estimates without appeal to the union bound. We also introduce a subsystem code realization of these protocols with constant time and low ancilla cost. Additionally, we confirm that magic-state factories have space-time costs that scale as a constant factor of surface code costs. We find that the magic-state factory required for postclassical factoring can be as small as 6.3 million data qubits, ignoring ancilla qubits, assuming 10-4 error gates and the availability of long-range interactions.

Factory-Calibrated Continuous Glucose Sensors: The Science Behind the Technology

PubMed Central

Budiman, Erwin Satrya

2017-01-01

Abstract The use of commercially available continuous glucose monitors for diabetes management requires sensor calibrations, which until recently are exclusively performed by the patient. A new development is the implementation of factory calibration for subcutaneous glucose sensors, which eliminates the need for user calibrations and the associated blood glucose tests. Factory calibration means that the calibration process is part of the sensor manufacturing process and performed under controlled laboratory conditions. The ability to move from a user calibration to factory calibration is based on several technical requirements related to sensor stability and the robustness of the sensor manufacturing process. The main advantages of factory calibration over the conventional user calibration are: (a) more convenience for the user, since no more fingersticks are required for calibration and (b) elimination of use errors related to the execution of the calibration process, which can lead to sensor inaccuracies. The FreeStyle Libre™ and FreeStyle Libre Pro™ flash continuous glucose monitoring systems are the first commercially available sensor systems using factory-calibrated sensors. For these sensor systems, no user calibrations are required throughout the sensor wear duration. PMID:28541139

Study on industrial wastewater treatment using superconducting magnetic separation

NASA Astrophysics Data System (ADS)

Zhang, Hao; Zhao, Zhengquan; Xu, Xiangdong; Li, Laifeng

2011-06-01

The mechanism of industrial wastewater treatment using superconducting magnetic separation is investigated. Fe 3O 4 nanoparticles were prepared by liquid precipitation and characterized by X-ray diffraction (XRD). Polyacrylic acid (PAA) film was coated on the magnetic particles using plasma coating technique. Transmission electron microscope (TEM) observation and infrared spectrum measurement indicate that the particle surface is well coated with PAA, and the film thickness is around 1 nm. Practical paper factory wastewater treatment using the modified magnetic seeds in a superconducting magnet (SCM) was carried out. The results show that the maximum removal rate of chemical oxygen demand (COD) by SCM method can reach 76%.

Iterative learning control with applications in energy generation, lasers and health care.

PubMed

Rogers, E; Tutty, O R

2016-09-01

Many physical systems make repeated executions of the same finite time duration task. One example is a robot in a factory or warehouse whose task is to collect an object in sequence from a location, transfer it over a finite duration, place it at a specified location or on a moving conveyor and then return for the next one and so on. Iterative learning control was especially developed for systems with this mode of operation and this paper gives an overview of this control design method using relatively recent relevant applications in wind turbines, free-electron lasers and health care, as exemplars to demonstrate its applicability.

Investigation of Ion Beam Production and Acceleration Using Linear Electron Beams and a Pulse Powered Plasma Focus.

DTIC Science & Technology

1984-03-01

POWERED PLASMA FOCUS Contract No. AFOSR-83-0145 PROGRESS REPORT For the Period April 1, 1983 through March 31, 1984 Submitted to Air Force Office of...AND ACCELERATION USING LINEAR ELECTRON BEAMS AND A PULSE POWERED PLASMA FOCUS Contract No. AFOSR-83-0145 PROGRESS REPORT For the Period April 1, 1983...Acceleration Using Linear Electron Beams and a Pulse Powered Plasma Focus " 01 €,G APRIL 1, 1983 THROUGH MRCH 31, 1984 A. Collective Acceleration and Related

Elemental source attribution signatures for calcium ammonium nitrate (CAN) fertilizers used in homemade explosives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fraga, Carlos G.; Mitroshkov, Alexander V.; Mirjankar, Nikhil S.

Calcium ammonium nitrate (CAN) is a widely available fertilizer composed of ammonium nitrate mixed with some form of calcium carbonate such as limestone or dolomite. CAN is also frequently used to make homemade explosives. The potential of using elemental profiling and chemometrics to match both pristine and reprocessed CAN fertilizers to their factories for use in future forensic investigations was examined. Inductively coupled plasma-mass spectrometry (ICP-MS) analysis was performed on 64 elements in 125 samples from 11 CAN stocks from 6 different CAN factories. Fisher ratio, degree-of-class-separation, and partial least squares discriminant analysis (PLSDA) were used to develop a modelmore » using the concentrations of Na, V, Mn, Cu, Ga, Sr, Ba and U to classify a validation set of CAN samples into 5 factory groups; one group was two factories from the same fertilizer company. In terms of the pristine CAN samples, i.e., unadulterated prills, 64% of the test samples were matched to their correct factory group with zero false positives. The same PLSDA model was used to correctly match 100% of the CAN samples that were reprocessed by crushing and mixing the CAN with powdered sugar. In the case of crushed CAN samples mixed with aluminum powder, correct matches were made for zero to 100% of the samples depending on the factory the CAN originated. Remarkably, for one factory, 100% of the ammonium nitrate samples that were extracted from CAN using tap or bottled water were matched to the correct CAN factory group. Lastly, the water-insoluble (calcium carbonate) portions of CAN provided a greater degree of discrimination between factories than the water-soluble portions of CAN. In summary, this work illustrates that sourcing unadulterated CAN fertilizer can potentially be done with high frequency and high confidence using elemental profiling and chemometrics while the sourcing of reprocessed CAN is dependent on how much an adulterant alters the recovered elemental profile of CAN.« less

[Analysis of musculoskeletal disorders, work load and working postures among manufacturing workers].

PubMed

Yu, Shan-fa; Gu, Gui-zhen; Sun, Shi-yi; Wang, Hai-sheng; Cui, Shou-ming; Yang, Xiao-fa; Yang, Shu-le; He, Li-hua; Wang, Sheng

2011-03-01

To analyze the distribution of the musculoskeletal disorders, work load and working postures in different factories, gender, education levels, age and working years among manufacturing workers. In a cross-sectional study of 5134 manufacturing workers in 12 factories, the morbidities for musculoskeletal disorders in one year period were measured with questionnaires. The morbidities for musculoskeletal disorders in body sites: waist, neck, shoulder, wrist, ankle/feet, knee, hip/buttocks and elbows were 59.7%, 47.9%, 38.1%, 33.7%, 26.9%, 25.4%, 15.2%, and 14.9%, respectively in one year period. There were significant differences of morbidities for musculoskeletal symptoms in body sites of workers among different factories (P < 0.05 or P < 0.01). The morbidities of musculoskeletal symptoms in elbows, waist, wrists and ankle/feet of the workers in refractory material and chemical fiber factories were higher than those in other factories, the morbidities for musculoskeletal symptoms of workers in garments and diamond factories were lower than those in other factories. The morbidities for musculoskeletal symptoms in neck, shoulders and wrists of female workers were significantly higher than those of male workers (P < 0.01). There were significant differences of the morbidities for musculoskeletal symptoms in body sites among workers with different educational levels (P < 0.05 or P < 0.01). There were significant differences of the morbidities for musculoskeletal symptoms in neck, shoulders, wrists, hip/buttocks and knee among groups with different age or different working years (P < 0.01), and the morbidities for musculoskeletal symptoms increased with age and working years. The proportions of unhealthy working postures and high working load among workers in refractory material and chemical fiber factories were higher; but those in garments and diamond factories were lower. The morbidities for musculoskeletal symptoms in waist, neck, shoulder and wrists of workers in manufacturing workers were higher; the gender, education level, age and working years could influenced the morbidities for musculoskeletal disorders.

Presence of sourdough lactic acid bacteria in commercial total mixed ration silage as revealed by denaturing gradient gel electrophoresis analysis.

PubMed

Wang, C; Nishino, N

2010-10-01

To characterize the bacterial communities in commercial total mixed ration (TMR) silage, which is known to have a long bunk life after silo opening. Samples were collected from four factories that produce TMR silage according to their own recipes. Three factories were sampled three times at 1-month intervals during the summer to characterize the differences between factories; one factory was sampled 12 times, three samples each during the summer, autumn, winter and spring, to determine seasonal changes. Bacterial communities were determined by culture-independent denaturing gradient gel electrophoresis. All silages contained lactic acid as the predominant acid, and the contents appeared stable regardless of factories and product seasons. Acetic acid and 1-propanol contents were different between factories and indicated seasonal changes, with increases in warm seasons compared to cool seasons. Both differences and similarities existed among the bacterial communities from each factory and product season. Lactobacillus parabuchneri was found in the products from three of four factories. Various sourdough lactic acid bacteria (LAB) were identified in commercial TMR silage; Lactobacillus panis, Lactobacillus hammesii, Lactobacillus mindensis, Lactobacillus pontis, Lactobacillus frumenti and Lactobacillus farciminis were detected in many products. Moreover, changes owing to product season were distinctive, and Lact. pontis and Lact. frumenti became detectable in summer products. Sourdough LAB are involved in the ensiling of commercial TMR silage. Silage bacterial communities vary more by season than by factory. The LAB species Lact. parabuchneri was detected in the TMR silage but may not be essential to the product's long bunk life after silo opening. Commercial TMR silage resembles sourdough with respect to bacterial communities and long shelf life. The roles of sourdough LAB in the ensiling process and aerobic stability are worth examining. © 2010 The Authors. Journal compilation © 2010 The Society for Applied Microbiology.

Impact of a private sector living wage intervention on depressive symptoms among apparel workers in the Dominican Republic: a quasi-experimental study

PubMed Central

Burmaster, Katharine B; Landefeld, John C; Rehkopf, David H; Lahiff, Maureen; Sokal-Gutierrez, Karen; Adler-Milstein, Sarah; Fernald, Lia C H

2015-01-01

Objectives Poverty reduction interventions through cash transfers and microcredit have had mixed effects on mental health. In this quasi-experimental study, we evaluate the effect of a living wage intervention on depressive symptoms of apparel factory workers in the Dominican Republic. Setting Two apparel factories in the Dominican Republic. Participants The final sample consisted of 204 hourly wage workers from the intervention (99) and comparison (105) factories. Interventions In 2010, an apparel factory began a living wage intervention including a 350% wage increase and significant workplace improvements. The wage increase was plausibly exogenous because workers were not aware of the living wage when applying for jobs and expected to be paid the usual minimum wage. These individuals were compared with workers at a similar local factory paying minimum wage, 15–16 months postintervention. Primary outcome measures Workers’ depressive symptoms were assessed using the Center for Epidemiologic Studies-Depression Scale (CES-D). Ordinary least squares and Poisson regressions were used to evaluate treatment effect of the intervention, adjusted for covariates. Results Intervention factory workers had fewer depressive symptoms than comparison factory workers (unadjusted mean CES-D scores: 10.6±9.3 vs 14.7±11.6, p=0.007). These results were sustained when controlling for covariates (β=−5.4, 95% CI −8.5 to −2.3, p=0.001). In adjusted analyses using the standard CES-D clinical cut-off of 16, workers at the intervention factory had a 47% reduced risk of clinically significant levels of depressive symptoms compared with workers at the comparison factory (23% vs 40%). Conclusions Policymakers have long grappled with how best to improve mental health among populations in low-income and middle-income countries. We find that providing a living wage and workplace improvements to improve income and well-being in a disadvantaged population is associated with reduced depressive symptoms. PMID:26238394

A Hospital Is Not Just a Factory, but a Complex Adaptive System-Implications for Perioperative Care.

PubMed

Mahajan, Aman; Islam, Salim D; Schwartz, Michael J; Cannesson, Maxime

2017-07-01

Many methods used to improve hospital and perioperative services productivity and quality of care have assumed that the hospital is essentially a factory, and therefore, that industrial engineering and manufacturing-derived redesign approaches such as Six Sigma and Lean can be applied to hospitals and perioperative services just as they have been applied in factories. However, a hospital is not merely a factory but also a complex adaptive system (CAS). The hospital CAS has many subsystems, with perioperative care being an important one for which concepts of factory redesign are frequently advocated. In this article, we argue that applying only factory approaches such as lean methodologies or process standardization to complex systems such as perioperative care could account for difficulties and/or failures in improving performance in care delivery. Within perioperative services, only noncomplex/low-variance surgical episodes are amenable to manufacturing-based redesign. On the other hand, complex surgery/high-variance cases and preoperative segmentation (the process of distinguishing between normal and complex cases) can be viewed as CAS-like. These systems tend to self-organize, often resist or react unpredictably to attempts at control, and therefore require application of CAS principles to modify system behavior. We describe 2 examples of perioperative redesign to illustrate the concepts outlined above. These examples present complementary and contrasting cases from 2 leading delivery systems. The Mayo Clinic example illustrates the application of manufacturing-based redesign principles to a factory-like (high-volume, low-risk, and mature practice) clinical program, while the Kaiser Permanente example illustrates the application of both manufacturing-based and self-organization-based approaches to programs and processes that are not factory-like but CAS-like. In this article, we describe how factory-like processes and CAS can coexist within a hospital and how self-organization-based approaches can be used to improve care delivery in many situations where manufacturing-based approaches may not be appropriate.

Method of automatic measurement and focus of an electron beam and apparatus therefore

DOEpatents

Giedt, W.H.; Campiotti, R.

1996-01-09

An electron beam focusing system, including a plural slit-type Faraday beam trap, for measuring the diameter of an electron beam and automatically focusing the beam for welding is disclosed. Beam size is determined from profiles of the current measured as the beam is swept over at least two narrow slits of the beam trap. An automated procedure changes the focus coil current until the focal point location is just below a workpiece surface. A parabolic equation is fitted to the calculated beam sizes from which optimal focus coil current and optimal beam diameter are determined. 12 figs.

Method of automatic measurement and focus of an electron beam and apparatus therefor

DOEpatents

Giedt, Warren H.; Campiotti, Richard

1996-01-01

An electron beam focusing system, including a plural slit-type Faraday beam trap, for measuring the diameter of an electron beam and automatically focusing the beam for welding. Beam size is determined from profiles of the current measured as the beam is swept over at least two narrow slits of the beam trap. An automated procedure changes the focus coil current until the focal point location is just below a workpiece surface. A parabolic equation is fitted to the calculated beam sizes from which optimal focus coil current and optimal beam diameter are determined.

Human platelet lysate in mesenchymal stromal cell expansion according to a GMP grade protocol: a cell factory experience.

PubMed

Becherucci, Valentina; Piccini, Luisa; Casamassima, Serena; Bisin, Silvia; Gori, Valentina; Gentile, Francesca; Ceccantini, Riccardo; De Rienzo, Elena; Bindi, Barbara; Pavan, Paola; Cunial, Vanessa; Allegro, Elisa; Ermini, Stefano; Brugnolo, Francesca; Astori, Giuseppe; Bambi, Franco

2018-05-02

The use of platelet lysate (PL) for the ex-vivo expansion of mesenchymal stromal/stem cells (MSCs) was initially proposed by Doucet et al. in 2005, as an alternative to animal serum. Moreover, regulatory authorities discourage the use of fetal bovine serum (FBS) or other animal derivatives, to avoid risk of zoonoses and xenogeneic immune reactions. Even if many studies investigated PL composition, there still are some open issues related to its use in ex-vivo MSC expansion, especially according to good manufacturing practice (GMP) grade protocols. As an authorized cell factory, we report our experience using standardized PL produced by Azienda Ospedaliero Universitaria Meyer Transfusion Service for MSC expansion according to a GMP grade clinical protocol. As suggested by other authors, we performed an in-vitro test on MSCs versus MSCs cultured with FBS that still represents the best way to test PL batches. We compared 12 MSC batches cultured with DMEM 5% PL with similar batches cultured with DMEM 10% FBS, focusing on the MSC proliferation rate, MSC surface marker expression, MSC immunomodulatory and differentiation potential, and finally MSC relative telomere length. Results confirmed the literature data as PL increases cell proliferation without affecting the MSC immunophenotype, immunomodulatory potential, differentiation potential and relative telomere length. PL can be considered a safe alternative to FBS for ex-vivo expansion of MSC according to a GMP grade protocol. Our experience confirms the literature data: a large number of MSCs for clinical applications can be obtained by expansion with PL, without affecting the MSC main features. Our experience underlines the benefits of a close collaboration between the PL producers (transfusion service) and the end users (cell factory) in a synergy of skills and experiences that can lead to standardized PL production.

Incorporating Cutting Edge Scientific Results from the Margins-Geoprisms Program into the Undergraduate Curriculum: The Subduction Factory

NASA Astrophysics Data System (ADS)

Penniston-Dorland, S.; Stern, R. J.; Edwards, B. R.; Kincaid, C. R.

2014-12-01

The NSF-MARGINS Program funded a decade of research on continental margin processes. The NSF-GeoPRISMS Mini-lesson Project, funded by NSF-TUES, is designed to integrate fundamental results from the MARGINS program into open-source college-level curriculum. Three Subduction Factory (SubFac) mini-lessons were developed as part of this project. These include hands-on examinations of data sets representing 3 key components of the subduction zone system: 1) Heat transfer in the subducted slab; 2) Metamorphic processes happening at the plate interface; and 3) Typical magmatic products of arc systems above subduction zones. Module 1: "Slab Temperatures Control Melting in Subduction Zones, What Controls Slab Temperature?" allows students to work in groups using beads rolling down slopes as an analog for the mathematics of heat flow. Using this hands-on, exploration-based approach, students develop an intuition for the mathematics of heatflow and learn about heat conduction and advection in the subduction zone environment. Module 2: "Subduction zone metamorphism" introduces students to the metamorphic rocks that form as the subducted slab descends and the mineral reactions that characterize subduction-related metamorphism. This module includes a suite of metamorphic rocks available for instructors to use in a lab, and exercises in which students compare pressure-temperature estimates obtained from metamorphic rocks to predictions from thermal models. Module 3: "Central American Arc Volcanoes, Petrology and Geochemistry" introduces students to basic concepts in igneous petrology using the Central American volcanic arc, a MARGINS Subduction Factory focus site, as an example. The module relates data from two different volcanoes - basaltic Cerro Negro (Nicaragua) and andesitic Ilopango (El Salvador) including hand sample observations and major element geochemistry - to explore processes of mantle and crustal melting and differentiation in arc volcanism.

Asymmetric flow field flow fractionation with light scattering detection - an orthogonal sensitivity analysis.

PubMed

Galyean, Anne A; Filliben, James J; Holbrook, R David; Vreeland, Wyatt N; Weinberg, Howard S

2016-11-18

Asymmetric flow field flow fractionation (AF 4 ) has several instrumental factors that may have a direct effect on separation performance. A sensitivity analysis was applied to ascertain the relative importance of AF 4 primary instrument factor settings for the separation of a complex environmental sample. The analysis evaluated the impact of instrumental factors namely, cross flow, ramp time, focus flow, injection volume, and run buffer concentration on the multi-angle light scattering measurement of natural organic matter (NOM) molar mass (MM). A 2 (5-1) orthogonal fractional factorial design was used to minimize analysis time while preserving the accuracy and robustness in the determination of the main effects and interactions between any two instrumental factors. By assuming that separations resulting in smaller MM measurements would be more accurate, the analysis produced a ranked list of effects estimates for factors and interactions of factors based on their relative importance in minimizing the MM. The most important and statistically significant AF 4 instrumental factors were buffer concentration and cross flow. The least important was ramp time. A parallel 2 (5-2) orthogonal fractional factorial design was also employed on five environmental factors for synthetic natural water samples containing silver nanoparticles (NPs), namely: NP concentration, NP size, NOM concentration, specific conductance, and pH. None of the water quality characteristic effects or interactions were found to be significant in minimizing the measured MM; however, the interaction between NP concentration and NP size was an important effect when considering NOM recovery. This work presents a structured approach for the rigorous assessment of AF 4 instrument factors and optimal settings for the separation of complex samples utilizing efficient orthogonal factional factorial design and appropriate graphical analysis. Copyright © 2016 Elsevier B.V. All rights reserved.

High power linear pulsed beam annealer

DOEpatents

Strathman, Michael D.; Sadana, Devendra K.; True, Richard B.

1983-01-01

A high power pulsed electron beam is produced in a system comprised of an electron gun having a heated cathode, control grid, focus ring, and a curved drift tube. The drift tube is maintained at a high positive voltage with respect to the cathode to accelerate electrons passing through the focus ring and to thereby eliminate space charge. A coil surrounding the curved drift tube provides a magnetic field which maintains the electron beam focused about the axis of the tube and imparts motion on electrons in a spiral path for shallow penetration of the electrons into a target. The curvature of the tube is selected so there is no line of sight between the cathode and a target holder positioned within a second drift tube spaced coaxially from the curved tube. The second tube and the target holder are maintained at a reference voltage that decelerates the electrons. A second coil surrounding the second drift tube maintains the electron beam focused about the axis of the second drift tube and compresses the electron beam to the area of the target. The target holder can be adjusted to position the target where the cross section of the beam matches the area of the target.

Burnout Factories: The Challenge of Retaining Great Teachers in Charter Schools

ERIC Educational Resources Information Center

Fusco, Mark

2017-01-01

In its well-intentioned effort to create alternatives to public school dropout factories, the charter school sector has created teacher burnout factories. But it does not have to be this way. Charter schools can continue to maintain high standards while creating a more sustainable work environment for teachers. This article examines the teacher…

Poor but Not Powerless: Women Workers in Production Chain Factories in China

ERIC Educational Resources Information Center

Ma, Lang; Jacobs, Francine

2010-01-01

The present study demonstrates the processes by which 12 young women working in four production chain factories in China shape their own lives--their developmental trajectories--during the period following their entry into factory work. One-on-one, in-depth, semi-structured interviews were conducted in August, 2005, as part of an evaluation…

Factorial Validity and Invariance Testing of the Exercise Dependence Scale-Revised in Swedish and Portuguese Exercisers

ERIC Educational Resources Information Center

Lindwall, Magnus; Palmeira, Antonio

2009-01-01

The present study investigated the factorial validity and factorial invariance of the 21-item Exercise Dependence Scale-Revised using 162 Swedish and 269 Portuguese exercisers. In addition, the prevalence of exercise dependence symptoms and links to exercise behavior, gender, and age in the two samples was also studied. Confirmatory factor…

19 CFR Appendix B to Part 191 - Sample Formats for Applications for Specific Manufacturing Drawback Rulings

Code of Federal Regulations, 2010 CFR

2010-04-01

... (see § 191.8(a)).) LOCATION OF FACTORY (Give the address of the factory(s) where the process of... article described under the PROCESS OF MANUFACTURE OR PRODUCTION section below and each article listed... manufacture or production by giving a thorough description of the manufacturing process. This description...

Factory overload testing of a large power transformer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas, D.H.; Lawrence, C.O.; Templeton, J.B.

1985-09-01

A factory overload test of up to 150% of the nameplate rating was run on a 224 MVA autotransformer. The results of this test were of great value and were used in identifying transformer overload limitations, in evaluating loading guide oil and winding equations, exponents and time constants, and in helping to perfect a factory overload test procedure.

Facilitators and barriers to healthy eating in a worksite cafeteria: a qualitative study from Nepal.

PubMed

Shrestha, Archana; Pyakurel, Prajjwal; Shrestha, Abha; Gautam, Rabin; Manandhar, Nisha; Rhodes, Elizabeth; Tamrakar, Dipesh; Karmacharya, Biraj Man; Malik, Vasanti; Mattei, Josiemer; Spiegelman, Donna

2017-01-01

Worksite interventions can serve as a potential platform for translating existing knowledge of diabetes prevention and facilitate healthy food choices. The study explored perceptions about healthy eating as well as potential facilitators and barriers to healthy eating among employees in a wire manufacturing factory in Nepal. We conducted a cross-sectional exploratory qualitative study in a wire manufacturing industry in eastern Nepal. We conducted three focus group discussions (FGDs) with a total of 26 employees and four in-depth interviews (IDIs) with cafeteria operators/managers from a wire manufacturing factory in eastern Nepal. FGDs and IDIs were audio-recorded, transcribed verbatim and analysed using the thematic method. Most employees defined healthy eating as the consumption of food prepared and maintained using hygienic practices and fresh foods in general. Major barriers to healthy eating included unavailability of healthy foods, difficulty in changing eating habits, the preference for fried foods in Nepali culture and the high costs of some healthy foods. The most commonly reported facilitator of healthy eating was the availability of affordable healthy food options in worksite cafeterias. Availability of healthy food options at an affordable price could lead to healthier food choices in the worksite.

Physcomitrella patens, a versatile synthetic biology chassis.

PubMed

Reski, Ralf; Bae, Hansol; Simonsen, Henrik Toft

2018-05-24

During three decades the moss Physcomitrella patens has been developed to a superb green cell factory with the first commercial products on the market. In the past three decades the moss P. patens has been developed from an obscure bryophyte to a model organism in basic biology, biotechnology, and synthetic biology. Some of the key features of this system include a wide range of Omics technologies, precise genome-engineering via homologous recombination with yeast-like efficiency, a certified good-manufacturing-practice production in bioreactors, successful upscaling to 500 L wave reactors, excellent homogeneity of protein products, superb product stability from batch-to-batch, and a reliable procedure for cryopreservation of cell lines in a master cell bank. About a dozen human proteins are being produced in P. patens as potential biopharmaceuticals, some of them are not only similar to their animal-produced counterparts, but are real biobetters with superior performance. A moss-made pharmaceutical successfully passed phase 1 clinical trials, a fragrant moss, and a cosmetic moss-product is already on the market, highlighting the economic potential of this synthetic biology chassis. Here, we focus on the features of mosses as versatile cell factories for synthetic biology and their impact on metabolic engineering.

60-MW test using the 30-MW klystrons for the KEKB project

NASA Astrophysics Data System (ADS)

Fukuda, S.; Michizono, S.; Nakao, K.; Saito, Y.; Anami, S.

1995-07-01

The B-Factory is a future plan, requiring an energy upgrade of the KEK linac from 2.5 GeV to 8.0 GeV (KEKB Project). This paper describes the recent development of an S-band high-power pulse klystron to be used as the PF-linac rf-source of the B-Factory. This tube is a modified version of the existing 30-MW tube, which produces 51 MW at a 310 kV beam voltage by optimizing the focusing magnetic field. In order to increase the reliability, the cathode diameter, the gun housing, and the insulation ceramic-seal were enlarged. This tube was redesigned so as to have the same characteristics as the test results of 30-MW tubes at a higher applied voltage without changing the rf interaction region. Four prototype tubes have been manufactured; final test results showed that these new tubes produce an output power of more than 50 MW at 310 kV with an efficiency of 46%. Recently this tube has produced more than 60 MW at a 350 kV beam voltage for a demonstration test. A comparison between the FCI-code prediction and the test results is also given in this paper.

Modeling The Atmosphere In The Era Of Big Data From Extremely Wide Field-Of-View Telescopes

NASA Astrophysics Data System (ADS)

Gonzalez Quiles, Junellie; Nordin, Jakob

2018-01-01

Surveys like the Sloan Digital Sky Survey (SDSS), Pan-STARRS and the Palomar Transient Factory Survey (PTF) receive large amounts of data, which need to be processed and calibrated in order to correct for various factors. One of the limiting factors in obtaining high quality data is the atmosphere, and it is therefore essential to find the appropriate calibration for the atmospheric extinction. It is to be expected that a physical atmospheric model, compared to a photometric calibration used currently by PTF, is more effective in calibrating for the atmospheric extinction due to its ability to account for rapid atmospheric fluctuation and objects of different colors. We focused on creating tools to model the atmospheric extinction for the upcoming Zwicky Transient Factory Survey (ZTF). In order to model the atmosphere, we created a program that combines input data and catalogue values, and efficiently handles them. Then, using PTF data and the SDSS catalogue, we created several models to fit the data, and tested the quality of the fits by chi-square minimization. This will allow us to optimize atmospheric extinction for the upcoming ZTF in the near future.

A case study of lean drug discovery: from project driven research to innovation studios and process factories.

PubMed

Ullman, Fredrik; Boutellier, Roman

2008-06-01

At the operational level, the number of investigational new drugs or candidates for development per dollar spent in research, and the number of patents per year are highly integrated measures of productivity and, thus, difficult to influence at the individual or lab level. Hence, different metrics are needed to assess and thereby improve productivity in research at the individual and group level. This review centers on a case study, including over 70 interviews, in a research department of a global pharmaceutical company as well as over 40 interviews in contract research organizations (CROs) and 5 in small biotechnology firms. For each lab, its value adding process was plotted according to lean six sigma methods and appropriate metrics were defined. We suggest a strong focus on short feedback loops in research as an indicator for efficiency. Our results reveal two categories of activities: creativity-driven ones and process-driven ones, both discussed with respect to the methodology used. The fundamental differences in nature of these activities require different sets of metrics to assess them. On the basis of these metrics, different organizational forms can be derived to achieve a lean research structure: innovation studios and process factories, respectively.

The structure of harassment and abuse in the workplace: a factorial comparison of two measures.

PubMed

Fendrich, Michael; Woodword, Paul; Richman, Judith A

2002-08-01

The structures of two measures examining negative experiences in the workplace, one focusing primarily on sexual harassment (SEQ) and one focusing on workplace abuse (GWA), were examined in detail. This article investigated whether the five subscales for the relatively unexplored measure (GWA) are reliably measured by a single underlying construct. It also investigated whether the two workplace-based measures are distinct but related constructs and the consistency of their factor structure across genders. Using a large and diverse organizational survey derived from a Midwestern university, analyses supported the distinctiveness of the two measures and showed that the factor structures for the two constructs were remarkably similar across genders. Analyses also suggested that indices of extreme behavior within each of the constructs were not reliably measured. The findings have important implications for data collection strategies in research focused on negative workplace experiences. This study provides considerable support for the continued use of both measures in research investigating the impact of adverse workplace environment on health.

High flux circularly polarized gamma beam factory: coupling a Fabry-Perot optical cavity with an electron storage ring

PubMed Central

Chaikovska, I.; Cassou, K.; Chiche, R.; Cizeron, R.; Cornebise, P.; Delerue, N.; Jehanno, D.; Labaye, F.; Marie, R.; Martens, A.; Peinaud, Y.; Soskov, V.; Variola, A.; Zomer, F.; Cormier, E.; Lhermite, J.; Dolique, V.; Flaminio, R.; Michel, C.; Pinard, L.; Sassolas, B.; Akagi, T.; Araki, S.; Honda, Y.; Omori, T.; Terunuma, N.; Urakawa, J.; Miyoshi, S.; Takahashi, T.; Yoshitama, H.

2016-01-01

We report and discuss high-flux generation of circularly polarized γ-rays by means of Compton scattering. The γ-ray beam results from the collision of an external-cavity-enhanced infrared laser beam and a low emittance relativistic electron beam. By operating a non-planar bow-tie high-finesse optical Fabry-Perot cavity coupled to a storage ring, we have recorded a flux of up to (3.5 ± 0.3) × 108 photons per second with a mean measured energy of 24 MeV. The γ-ray flux has been sustained for several hours. In particular, we were able to measure a record value of up to 400 γ-rays per collision in a full bandwidth. Moreover, the impact of Compton scattering on the electron beam dynamics could be observed resulting in a reduction of the electron beam lifetime correlated to the laser power stored in the Fabry-Perot cavity. We demonstrate that the electron beam lifetime provides an independent and consistent determination of the γ-ray flux. Furthermore, a reduction of the γ-ray flux due to intrabeam scattering has clearly been identified. These results, obtained on an accelerator test facility, warrant potential scaling and revealed both expected and yet unobserved effects. They set the baseline for further scaling of the future Compton sources under development around the world. PMID:27857146

Discrimination of Swiss cheese from 5 different factories by high impact volatile organic compound profiles determined by odor activity value using selected ion flow tube mass spectrometry and odor threshold.

PubMed

Taylor, Kaitlyn; Wick, Cheryl; Castada, Hardy; Kent, Kyle; Harper, W James

2013-10-01

Swiss cheese contains more than 200 volatile organic compounds (VOCs). Gas chromatography-mass spectrometry has been utilized for the analysis of volatile compounds in food products; however, it is not sensitive enough to measure VOCs directly in the headspace of a food at low concentrations. Selected ion flow tube mass spectrometry (SIFT-MS) provides a basis for determining the concentrations of VOCs in the head space of the sample in real time at low concentration levels of parts per billion/trillion by volume. Of the Swiss cheese VOCs, relatively few have a major impact on flavor quality. VOCs with odor activity values (OAVs) (concentration/odor threshold) greater than one are considered high-impact flavor compounds. The objective of this study was to utilize SIFT-MS concentrations in conjunction with odor threshold values to determine OAVs thereby identifying high-impact VOCs to use for differentiating Swiss cheese from five factories and identify the factory variability. Seventeen high-impact VOCs were identified for Swiss cheese based on an OAV greater than one in at least 1 of the 5 Swiss cheese factories. Of these, 2,3-butanedione was the only compound with significantly different OAVs in all factories; however, cheese from any pair of factories had multiple statistically different compounds based on OAV. Principal component analysis using soft independent modeling of class analogy statistical differentiation plots, with all of the OAVs, showed differentiation between the 5 factories. Overall, Swiss cheese from different factories was determined to have different OAV profiles utilizing SIFT-MS to determine OAVs of high impact compounds. © 2013 Institute of Food Technologists®

Spatially resolving the secretome within the mycelium of the cell factory Aspergillus niger.

PubMed

Krijgsheld, Pauline; Altelaar, A F Maarten; Post, Harm; Ringrose, Jeffrey H; Müller, Wally H; Heck, Albert J R; Wösten, Han A B

2012-05-04

Aspergillus niger is an important cell factory for the industrial production of enzymes. These enzymes are released into the culture medium, from which they can be easily isolated. Here, we determined with stable isotope dimethyl labeling the secretome of five concentric zones of 7-day-old xylose-grown colonies of A. niger that had either or not been treated with cycloheximide. As expected, cycloheximide blocked secretion of proteins at the periphery of the colony. Unexpectedly, protein release was increased by cycloheximide in the intermediate and central zones of the mycelium when compared to nontreated colonies. Electron microscopy indicated that this is due to partial degradation of the cell wall. In total, 124 proteins were identified in cycloheximide-treated colonies, of which 19 secreted proteins had not been identified before. Within the pool of 124 proteins, 53 secreted proteins were absent in nontreated colonies, and additionally, 35 proteins were released ≥4-fold in the central and subperipheral zones of cycloheximide-treated colonies when compared to nontreated colonies. The composition of the secretome in each of the five concentric zones differed. This study thus describes spatial release of proteins in A. niger, which is instrumental in understanding how fungi degrade complex substrates in nature.

Synthesis and factorial design applied to a novel chitosan/sodium polyphosphate nanoparticles via ionotropic gelation as an RGD delivery system.

PubMed

Kiilll, Charlene Priscila; Barud, Hernane da Silva; Santagneli, Sílvia Helena; Ribeiro, Sidney José Lima; Silva, Amélia M; Tercjak, Agnieszka; Gutierrez, Junkal; Pironi, Andressa Maria; Gremião, Maria Palmira Daflon

2017-02-10

Chitosan nanoparticles have been extensively studied for both drug and protein/peptide delivery. The aim of this study was to develop an optimized chitosan nanoparticle, by ionotropic gelation method, using 3 2 full factorial design with a novel polyanion, sodium polyphosphate, well known under the trade name Graham salt. The effects of these parameters on the particle size, zeta potential, and morphology and association efficiency were investigated. The optimized nanoparticles showed an estimated size of 166.20±1.95nm, a zeta potential of 38.7±1.2mV and an efficacy of association of 97.0±2.4%. The Atomic Force Microscopy (AFM) and Scanning Electronic Microscopy (SEM) revealed spherical nanoparticles with uniform size. Molecular interactions among the components of the nanoparticles and peptide were evaluated by Fourier Transform Infrared Spectra (FTIR) and Differential Scanning Calorimetry (DSC). The obtained results indicated that, the developed nanoparticles demonstrated high biocompatible, revealing no or low toxicity in the human cancer cell line (Caco-2). In conclusion, this work provides parameters that contribute to production of chitosan nanoparticles and sodium polyphosphate with desirable size, biocompatible and enabling successful use for protein/peptides delivery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Improvement of Storage Medium for Cultured Human Retinal Pigment Epithelial Cells Using Factorial Design.

PubMed

Pasovic, L; Utheim, T P; Reppe, S; Khan, A Z; Jackson, C J; Thiede, B; Berg, J P; Messelt, E B; Eidet, J R

2018-04-09

Storage of human retinal pigment epithelium (hRPE) can contribute to the advancement of cell-based RPE replacement therapies. The present study aimed to improve the quality of stored hRPE cultures by identifying storage medium additives that, alone or in combination, contribute to enhancing cell viability while preserving morphology and phenotype. hRPE cells were cultured in the presence of the silk protein sericin until pigmentation. Cells were then stored for 10 days in storage medium plus sericin and either one of 46 different additives. Individual effects of each additive on cell viability were assessed using epifluorescence microscopy. Factorial design identified promising additive combinations by extrapolating their individual effects. Supplementing the storage medium with sericin combined with adenosine, L-ascorbic acid and allopurinol resulted in the highest cell viability (98.6 ± 0.5%) after storage for three days, as measured by epifluorescence microscopy. Flow cytometry validated the findings. Proteomics identified 61 upregulated and 65 downregulated proteins in this storage group compared to the unstored control. Transmission electron microscopy demonstrated the presence of melanosomes after storage in the optimized medium. We conclude that the combination of adenosine, L-ascorbic acid, allopurinol and sericin in minimal essential medium preserves RPE pigmentation while maintaining cell viability during storage.

Toroidal magnetized iron neutrino detector for a neutrino factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bross, A.; Wands, R.; Bayes, R.

2013-08-01

A neutrino factory has unparalleled physics reach for the discovery and measurement of CP violation in the neutrino sector. A far detector for a neutrino factory must have good charge identification with excellent background rejection and a large mass. An elegant solution is to construct a magnetized iron neutrino detector (MIND) along the lines of MINOS, where iron plates provide a toroidal magnetic field and scintillator planes provide 3D space points. In this report, the current status of a simulation of a toroidal MIND for a neutrino factory is discussed in light of the recent measurements of largemore » $$\\theta_{13}$$. The response and performance using the 10 GeV neutrino factory configuration are presented. It is shown that this setup has equivalent $$\\delta_{CP}$$ reach to a MIND with a dipole field and is sensitive to the discovery of CP violation over 85% of the values of $$\\delta_{CP}$$.« less

Gynecologic pain related to occupational stress among female factory workers in Tianjin, China

PubMed Central

Sznajder, Kristin K; Harlow, Siobán D; Burgard, Sarah A; Wang, Yanrang; Han, Cheng; Liu, Jing

2014-01-01

Background: Dysmenorrhea, dyspareunia, and non-cyclic pelvic pain are health concerns for factory workers in China and may be increased by occupational stress. Objectives: To estimate the prevalence and demographic and occupational factors associated with three types of gynecologic pain among female factory workers in Tianjin. Methods: The study included 651 female workers from three factories in Tianjin, China. Logistic regression models were estimated to determine associations between occupational stress and gynecologic pain. Results: Occupational stress including high job strain, exhaustion, and stress related to working conditions was a risk factor for gynecologic pain. High job strain and poor job security were associated with an increased risk for dysmenorrhea. Compulsory overtime and exhaustion were associated with increased non-cyclic pelvic pain. Working overtime and exhaustion were associated with increased dyspareunia. Conclusions: As China’s population of female factory workers grows, research on the reproductive health of this population is essential. PMID:24804338

Metabolic modelling in the development of cell factories by synthetic biology

PubMed Central

Jouhten, Paula

2012-01-01

Cell factories are commonly microbial organisms utilized for bioconversion of renewable resources to bulk or high value chemicals. Introduction of novel production pathways in chassis strains is the core of the development of cell factories by synthetic biology. Synthetic biology aims to create novel biological functions and systems not found in nature by combining biology with engineering. The workflow of the development of novel cell factories with synthetic biology is ideally linear which will be attainable with the quantitative engineering approach, high-quality predictive models, and libraries of well-characterized parts. Different types of metabolic models, mathematical representations of metabolism and its components, enzymes and metabolites, are useful in particular phases of the synthetic biology workflow. In this minireview, the role of metabolic modelling in synthetic biology will be discussed with a review of current status of compatible methods and models for the in silico design and quantitative evaluation of a cell factory. PMID:24688669

In-Factory Learning - Qualification For The Factory Of The Future

NASA Astrophysics Data System (ADS)

Quint, Fabian; Mura, Katharina; Gorecky, Dominic

2015-07-01

The Industry 4.0 vision anticipates that internet technologies will find their way into future factories replacing traditional components by dynamic and intelligent cyber-physical systems (CPS) that combine the physical objects with their digital representation. Reducing the gap between the real and digital world makes the factory environment more flexible, more adaptive, but also more complex for the human workers. Future workers require interdisciplinary competencies from engineering, information technology, and computer science in order to understand and manage the diverse interrelations between physical objects and their digital counterpart. This paper proposes a mixed-reality based learning environment, which combines physical objects and visualisation of digital content via Augmented Reality. It uses reality-based interaction in order to make the dynamic interrelations between real and digital factory visible and tangible. We argue that our learning system does not work as a stand-alone solution, but should fit into existing academic and advanced training curricula.

The landing of field mosquitoes on permethrin-treated military uniforms in queensland, australia.

PubMed

Frances, S P; Mackenzie, D O; Sferopoulos, R; Lee, Bin

2014-12-01

A study to evaluate the protection provided by permethrin-treated military fabric following cold-water washing against host-seeking mosquitoes is reported. The landing/probing of native mosquitoes on Australian Defence Force Disruptive Pattern Combat Uniform shirts treated by dipping in 0.6% permethrin emulsion (Perigen Defence®, containing 500 g/l permethrin), and commercial factory treatments in the USA (Factory A) and Europe (Factory B) were recorded after 0, 1, 3, 5, and 10 washes. The study showed that significantly shorter landing/probing times compared with untreated controls were recorded for shirts treated with Factory A treatment after 0 and 1 wash, and for the Factory B treatment after 0 washes, and there were no differences between permethrin treatment and control landing. The study concludes that better methods to assess protection from landing/probing mosquitoes in the field are needed.

Arcnet(R) On-Fiber -- A Viable Factory Automation Alternative

NASA Astrophysics Data System (ADS)

Karlin, Geof; Tucker, Carol S.

1987-01-01

Manufacturers need to improve their operating methods and increase their productivity so they can compete successfully in the marketplace. This goal can be achieved through factory automation, and the key to this automation is successful data base management and factory integration. However, large scale factory automation and integration requires effective communications, and this has given rise to an interest in various Local Area Networks or LANs. In a completely integrated and automated factory, the entire organization must have access to the data base, and all departments and functions must be able to communicate with each other. Traditionally, these departments and functions use incompatible equipment, and the ability to make such equipment communicate presents numerous problems. ARCNET, a token-passing LAN which has a significant presence in the office environment today, coupled with fiber optic cable, the cable of the future, provide an effective, low-cost solution to a number of these problems.

A Profile-Based Framework for Factorial Similarity and the Congruence Coefficient.

PubMed

Hartley, Anselma G; Furr, R Michael

2017-01-01

We present a novel profile-based framework for understanding factorial similarity in the context of exploratory factor analysis in general, and for understanding the congruence coefficient (a commonly used index of factor similarity) specifically. First, we introduce the profile-based framework articulating factorial similarity in terms of 3 intuitive components: general saturation similarity, differential saturation similarity, and configural similarity. We then articulate the congruence coefficient in terms of these components, along with 2 additional profile-based components, and we explain how these components resolve ambiguities that can be-and are-found when using the congruence coefficient. Finally, we present secondary analyses revealing that profile-based components of factorial are indeed linked to experts' actual evaluations of factorial similarity. Overall, the profile-based approach we present offers new insights into the ways in which researchers can examine factor similarity and holds the potential to enhance researchers' ability to understand the congruence coefficient.

Micro X-ray diffraction analysis of thin films using grazing-exit conditions.

PubMed

Noma, T; Iida, A

1998-05-01

An X-ray diffraction technique using a hard X-ray microbeam for thin-film analysis has been developed. To optimize the spatial resolution and the surface sensitivity, the X-ray microbeam strikes the sample surface at a large glancing angle while the diffracted X-ray signal is detected with a small (grazing) exit angle. Kirkpatrick-Baez optics developed at the Photon Factory were used, in combination with a multilayer monochromator, for focusing X-rays. The focused beam size was about 10 x 10 micro m. X-ray diffraction patterns of Pd, Pt and their layered structure were measured. Using a small exit angle, the signal-to-background ratio was improved due to a shallow escape depth. Under the grazing-exit condition, the refraction effect of diffracted X-rays was observed, indicating the possibility of surface sensitivity.

Seeing Through Smoke: Sorting through the Science and Politics in the Making of the 1956 British Clean Air Act (Invited)

NASA Astrophysics Data System (ADS)

Kenny, D. A.

2010-12-01

The 1952 “Killer Smog” left over 4000 citizens of Greater London dead in a single week. It was a highly visible environmental disaster, which pinned the British government with responsibility over factory and domestic coal smoke pollution. Within four years of the Smog, the British parliament passed the 1956 Clean Air Act, which was designed primarily to prevent the release of dark smoke from the chimneys of private dwellings and factories. This act is considered a significant turning point in the history of environmental regulation. Through the analysis of confidential documents from government ministries and Members of Parliament, my research has focused on how decisions were made following this man-made environmental catastrophe. The primary focus of this presentation will be to explore why the British government appeared lethargic in the face of its long-standing coal pollution problem and why it finally passed the first clean air act in the world. In this case, establishing responsibility and organizing research were the major time constraints on policy action. In the months following the 1952 Smog, government departments passed off responsibility and quarreled over jurisdiction in the smog matter. Ministries held responsible for air pollution jointly established the Committee on Air Pollution to find a solution to urban smog. In the years following, the Committee on Air Pollution compiled research on the health effects and economic impact of air pollution, deriving its information from a variety of sources. In its 1954 final report, the committee named smoke and sulfur dioxide the most likely culprits of the 1952 deaths, and it recommended the elimination of smoke-producing coal from the British market, a major change to how the British fueled their homes and factories. The resulting 1956 Clean Air Act was the product of numerous compromises over the economic, political, and social issues present in Great Britain at the time. The British government’s policy response to the 1952 Killer Smog provides an important backdrop to some of the issues and dilemmas experienced in the regulation of air pollution today. This presentation will provide an interdisciplinary perspective on the complexity of Great Britain’s air pollution problem and the difficulties in delineating its solution.

Growth and nanomechanical characterization of nanoscale 3D architectures grown via focused electron beam induced deposition

DOE PAGES

Lewis, Brett B.; Mound, Brittnee A.; Srijanto, Bernadeta; ...

2017-10-12

Here, nanomechanical measurements of platinum–carbon 3D nanoscale architectures grown via focused electron beam induced deposition (FEBID) were performed using a nanoindentation system in a scanning electron microscope (SEM) for simultaneous in situ imaging.

Green lumber grade yields from factory grade logs of three oak species

Treesearch

Daniel A. Yaussy

1986-01-01

Multivariate regression models were developed to predict green board foot yields for the seven common factory lumber grades processed from white, black, and chestnut oak factory grade logs. These models use the standard log measurements of grade, scaling diameter, log length, and proportion of scaling defect. Any combination of lumber grades (such as 1 Common and...

Hardwood log grades and lumber grade yields for factory lumber logs

Treesearch

Leland F. Hanks; Glenn L. Gammon; Robert L. Brisbin; Everette D. Rast

1980-01-01

The USDA Forest Service Standard Grades for Hardwood Factory Lumber Logs are described, and lumber grade yields for 16 species and 2 species groups are presented by log grade and log diameter. The grades enable foresters, log buyers, and log sellers to select and grade those log suitable for conversion into standard factory grade lumber. By using the apropriate lumber...

26 CFR 1.897-2 - United States real property holding corporations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... value of $500,000. DC's only real property interest was a factory that it had occupied for over 50 years, which had a book value of $200,000. The factory was located in a deteriorated downtown area, and DC had... time of DC's December 31, 1989 determination date, the downtown area in which DC's factory was located...

26 CFR 1.897-2 - United States real property holding corporations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... value of $500,000. DC's only real property interest was a factory that it had occupied for over 50 years, which had a book value of $200,000. The factory was located in a deteriorated downtown area, and DC had... time of DC's December 31, 1989 determination date, the downtown area in which DC's factory was located...

26 CFR 1.897-2 - United States real property holding corporations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... value of $500,000. DC's only real property interest was a factory that it had occupied for over 50 years, which had a book value of $200,000. The factory was located in a deteriorated downtown area, and DC had... time of DC's December 31, 1989 determination date, the downtown area in which DC's factory was located...

26 CFR 1.897-2 - United States real property holding corporations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... value of $500,000. DC's only real property interest was a factory that it had occupied for over 50 years, which had a book value of $200,000. The factory was located in a deteriorated downtown area, and DC had... time of DC's December 31, 1989 determination date, the downtown area in which DC's factory was located...

Green lumber grade yields from black cherry and red maple factory grade logs sawed at band and circular mills

Treesearch

Daniel A. Yaussy

1989-01-01

Multivariate regression models were developed to predict green board-foot yields (1 board ft. = 2.360 dm 3) for the standard factory lumber grades processed from black cherry (Prunus serotina Ehrh.) and red maple (Acer rubrum L.) factory grade logs sawed at band and circular sawmills. The models use log...

The Physics of the B Factories

DOE PAGES

Bevan, A. J.; Golob, B.; Mannel, Th.; ...

2014-11-19

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.

The Skateboard Factory: Curriculum by Design--Oasis Skateboard Factory Q&A with Craig Morrison

ERIC Educational Resources Information Center

Pearson, George

2012-01-01

Since its opening three years ago, Oasis Skateboard Factory (OSF), founded by teacher Craig Morrison, has attracted considerable media exposure and received a Ken Spencer Award from the CEA for its innovative program. OSF is one of three programs offered by Oasis Alternative Secondary School, one of 22 alternative secondary schools of the Toronto…

Industrial Technology Modernization Program. Project 32. Factory Vision. Phase 2

DTIC Science & Technology

1988-04-01

instructions for the PWA’s, generating the numerical control (NC) program instructions for factory assembly equipment, controlling the process... generating the numerical control (NC) program instructions for factory assembly equipment, controlling the production process instructions and NC... Assembly Operations the "Create Production Process Program" will automatically generate a sequence of graphics pages (in paper mode), or graphics screens

78 FR 29200 - In the Matter of Griffin Mining, Inc., Power Sports Factory, Inc., Star Energy Corp., TransNet...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-17

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of Griffin Mining, Inc., Power Sports Factory, Inc., Star Energy Corp., TransNet Corp., Valcom, Inc., and Vibe Records, Inc.; Order of... information concerning the securities of Power Sports Factory, Inc. because it has not filed any periodic...

Rising Valor: A Research Study of Chinese Women Working in Factories, Educating Themselves and Redefining Women's Empowerment

ERIC Educational Resources Information Center

Newton, Claudia Kristine

2017-01-01

Few empirical studies directly address education among women factory workers in China, much less their sense of agency, power, character and awareness. This dissertation seeks to discover whether among women factory workers in the core manufacturing center, the Yangtze River Delta region of China, educational opportunities and other resources…

Aft segment dome-to-stiffener factory joint insulation void elimination

NASA Technical Reports Server (NTRS)

Jensen, S. K.

1991-01-01

Since the detection of voids in the internal insulation of the dome-to-stiffener factory joint of the 15B aft segment, all aft segment dome-to-stiffener factory joints were x-rated and all were found to contain voids. Using a full-scale process simulation article (PSA), the objective was to demonstrate that the proposed changes in the insulation layup and vacuum bagging processes will greatly reduce or eliminate voids without adversely affecting the configuration of performance of the insulation which serves as a primary seal over the factory joint. The PSA-8 aft segment was insulated and cured using standard production processes.

The 9-item Bergen Burnout Inventory: factorial validity across organizations and measurements of longitudinal data.

PubMed

Feldt, Taru; Rantanen, Johanna; Hyvönen, Katriina; Mäkikangas, Anne; Huhtala, Mari; Pihlajasaari, Pia; Kinnunen, Ulla

2014-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times.

Changes in Eocene-Miocene shallow marine carbonate factories along the tropical SE Circum-Caribbean responded to major regional and global environmental and tectonic events

NASA Astrophysics Data System (ADS)

Silva-Tamayo, Juan Carlos

2015-04-01

Changes in the factory of Cenozoic tropical marine carbonates have been for long attributed to major variations on climatic and environmental conditions. Although important changes on the factories of Cenozoic Caribbean carbonates seem to have followed global climatic and environmental changes, the regional impact of such changes on the factories of shallow marine carbonate along the Caribbean is not well established. Moreover, the influence of transpressional tectonics on the occurrence, distribution and stratigraphy of shallow marine carbonate factories along this area is far from being well understood. Here we report detailed stratigraphic, petrographic and Sr-isotope chemostratigraphic information of several Eocene-Miocene carbonate successions deposited along the equatorial/tropical SE Circum-Caribbean (Colombia and Panama) from which we further assess the influence of changing environmental conditions, transtentional tectonics and sea level change on the development of the shallow marine carbonate factories. Our results suggest that during the Eocene-early Oligocene interval, a period of predominant high atmospheric pCO2, coralline algae constitute the principal carbonate builders of shallow marine carbonate successions along the SE Circum-Caribbean. Detailed stratigraphic and paragenetic analyses suggest the developed of laterally continuous red algae calcareous build-ups along outer-rimmed carbonate platforms. The predominance of coralline red algae over corals on the shallow marine carbonate factories was likely related to high sea surface temperatures and high turbidity. The occurrence of such build-ups was likely controlled by pronounce changes in the basin paleotopography, i.e. the occurrence of basement highs and lows, resulting from local transpressional tectonics. The occurrence of these calcareous red algae dominated factories was also controlled by diachronic opening of different sedimentary basins along the SE Circum Caribbean resulting from transpressional tectonics. Calcareous algae persisted as the main constituents of the shallow marine carbonate factories until the middle Oligocene; a period when atmospheric pCO2 dropped significantly. The drop in atmospheric pCO2 allowed the onset of global icehouse conditions, which likely resulted in a decrease in sea surface temperatures along the Caribbean. This drop allowed the appearance of corals as the main constituents of the shallow marine carbonate factories along the SE Circum-Caribbean by late Oligocene times.

Accelerated Electron-Beam Formation with a High Capture Coefficient in a Parallel Coupled Accelerating Structure

NASA Astrophysics Data System (ADS)

Chernousov, Yu. D.; Shebolaev, I. V.; Ikryanov, I. M.

2018-01-01

An electron beam with a high (close to 100%) coefficient of electron capture into the regime of acceleration has been obtained in a linear electron accelerator based on a parallel coupled slow-wave structure, electron gun with microwave-controlled injection current, and permanent-magnet beam-focusing system. The high capture coefficient was due to the properties of the accelerating structure, beam-focusing system, and electron-injection system. Main characteristics of the proposed systems are presented.

Focused electron and ion beam systems

DOEpatents

Leung, Ka-Ngo; Reijonen, Jani; Persaud, Arun; Ji, Qing; Jiang, Ximan

2004-07-27

An electron beam system is based on a plasma generator in a plasma ion source with an accelerator column. The electrons are extracted from a plasma cathode in a plasma ion source, e.g. a multicusp plasma ion source. The beam can be scanned in both the x and y directions, and the system can be operated with multiple beamlets. A compact focused ion or electron beam system has a plasma ion source and an all-electrostatic beam acceleration and focusing column. The ion source is a small chamber with the plasma produced by radio-frequency (RF) induction discharge. The RF antenna is wound outside the chamber and connected to an RF supply. Ions or electrons can be extracted from the source. A multi-beam system has several sources of different species and an electron beam source.

Nitrogen fertilizer factory effects on the amino acid and nitrogen content in the needles of Scots pine.

PubMed

Kupsinskiene, E

2001-12-04

The aim of the research was to evaluate the content of amino acids in the needles of Pinus sylvestris growing in the area affected by a nitrogen fertilizer factory and to compare them with other parameters of needles, trees, and sites. Three young-age stands of Scots pine were selected at a distance of 0.5 km, 5 km, and 17 km from the factory. Examination of the current-year needles in winter of the year 2000 revealed significant (p < 0.05) differences between the site at a 0.5-km distance from the factory and the site at a 17-km distance from the factory--with the site closest to the factory showing the highest concentrations of protein (119%), total arginine (166%), total other amino acids (depending on amino acid, the effect ranged between 119 and 149%), free arginine (771%), other free amino acids (glutamic acid, threonine, serine, lysine--depending on amino acid, the effect ranged between 162 and 234%), also the longest needles, widest diameter, largest surface area, and heaviest dry weight (respectively, 133, 110, 136, and 169%). The gradient of nitrogen concentration in the needles was assessed on the selected plots over the period of 1995-2000, with the highest concentration (depending on year, 119 to 153%) documented in the site located 0.5 km from the factory. Significant correlations were determined between the total amino acid contents (r = 0.448 -0.939, p < 0.05), some free amino acid (arginine, aspartic acid, glutamic acid, lysine, threonine, and serine) contents (r = 0.418 - 0.975, p < 0.05), and air pollutant concentration at the sites, the distance between the sites and the factory, and characteristics of the needles. No correlation was found between free or total arginine content and defoliation or retention of the needles. In conclusion, it was revealed that elevated mean monthly concentration of ammonia (26 microg m(-3)) near the nitrogen fertilizer factory caused changes in nitrogen metabolism, especially increasing (nearly eight times) concentration of free arginine in the needles of Scots pine.

Divergent response of the neritic carbonate factory to environmental changes during the Early Bajocian Event

NASA Astrophysics Data System (ADS)

Bodin, Stephane; Hönig, Martin; Krencker, Francois-Nicolas; Danisch, Jan; Kabiri, Lahcen

2017-04-01

The Early Bajocian witnessed a global environmental perturbation, characterized by faunal and floral turnovers and a positive carbon isotope excursion. In Italy, this environmental perturbation coincided with an eutrophication event and a carbonate crisis, but this has so far not been adequately reported from other settings, leaving doubt about the extent and nature of these phenomena. Here, we are reporting on an extensive neritic carbonate factory demise that occurs in the upper Lower Bajocian of the Central High Atlas of Morocco, more precisely in the upper Propinquans - lower Humphriesianum Zones. This demise coincided with the acme of the global carbon isotope perturbation, recorded by a 3‰ positive carbon isotope excursion in the bulk organic matter of Morocco. Recovery of the neritic carbonate system occurs during the Early to Late Bajocian transition. The duration of the neritic carbonate factory demise was therefore in the order of 1 Myr. Furthermore, we observe that the Lower Bajocian of Morocco is relatively enriched in arenitic siliciclastic deposits, suggesting increased weathering and nutrient levels along the northwestern margin of Africa during the Early Bajocian. However, comparison with neighboring European basins highlights the non-uniqueness and different timing of the response of shallow-water carbonates to the Early Bajocian environmental perturbations, as some regions present no sign of carbonate factory crisis. Hence, we postulate that local factors were important in mediating the response of neritic carbonate factories to this global environmental perturbation. We notably highlight the role of large Early Bajocian sea-level fluctuation as a trigger for carbonate factory change and demise in Morocco. Indeed, in the Central High Atlas Basin, transgressive intervals are seeing the development of a mud-dominated carbonate factory whereas regressive intervals are associated with grain-dominated carbonate factory. We speculate that the combination of high subsidence rates in the Central High Atlas Basin with large eustatic sea-level rise and high nutrient levels during the Early Bajocian stressed the mud-dominated benthic carbonate factory beyond a critical threshold, explaining the regional demise event.

Impact of a private sector living wage intervention on depressive symptoms among apparel workers in the Dominican Republic: a quasi-experimental study.

PubMed

Burmaster, Katharine B; Landefeld, John C; Rehkopf, David H; Lahiff, Maureen; Sokal-Gutierrez, Karen; Adler-Milstein, Sarah; Fernald, Lia C H

2015-08-03

Poverty reduction interventions through cash transfers and microcredit have had mixed effects on mental health. In this quasi-experimental study, we evaluate the effect of a living wage intervention on depressive symptoms of apparel factory workers in the Dominican Republic. Two apparel factories in the Dominican Republic. The final sample consisted of 204 hourly wage workers from the intervention (99) and comparison (105) factories. In 2010, an apparel factory began a living wage intervention including a 350% wage increase and significant workplace improvements. The wage increase was plausibly exogenous because workers were not aware of the living wage when applying for jobs and expected to be paid the usual minimum wage. These individuals were compared with workers at a similar local factory paying minimum wage, 15-16 months postintervention. Workers' depressive symptoms were assessed using the Center for Epidemiologic Studies-Depression Scale (CES-D). Ordinary least squares and Poisson regressions were used to evaluate treatment effect of the intervention, adjusted for covariates. Intervention factory workers had fewer depressive symptoms than comparison factory workers (unadjusted mean CES-D scores: 10.6 ± 9.3 vs 14.7 ± 11.6, p = 0.007). These results were sustained when controlling for covariates (β = -5.4, 95% CI -8.5 to -2.3, p = 0.001). In adjusted analyses using the standard CES-D clinical cut-off of 16, workers at the intervention factory had a 47% reduced risk of clinically significant levels of depressive symptoms compared with workers at the comparison factory (23% vs 40%). Policymakers have long grappled with how best to improve mental health among populations in low-income and middle-income countries. We find that providing a living wage and workplace improvements to improve income and well-being in a disadvantaged population is associated with reduced depressive symptoms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Life cycle inventory for palm based plywood: A gate-to-gate case study

NASA Astrophysics Data System (ADS)

Ahmad, Shamim; Sahid, Ismail; Subramaniam, Vijaya; Muhamad, Halimah; Mokhtar, Anis

2013-11-01

The oil palm industry heavily relies on the world market. It is essential to ensure that the oil palm industry is ready to meet the demands and expectation of these overseas customers on the environmental performance of the oil palm industry. Malaysia produces 13.9 million tons of oil palm biomass including oil palm trunk (OPT), frond and empty fruits bunches (EFB) annually. OPT felled in some oil palm plantations during replanting is transported to various industries and one such industry is the plywood factories. In order to gauge the environmental performance of the use of OPT as plywood a Life Cycle Assessment (LCA) study was conducted for palm based plywood. LCA is an important tool to assess the environmental performance of a product or process. Life cycle inventory (LCI) is the heart of a LCA study. This LCI study has a gate-to-gate system boundary and the functional unit is 1 m3 palm plywood produced and covers three types of plywood; Moisture Resistance Plywood (MR), Weather Boiling Proof Plywood Grade 1 (WBP Grade 1) at Factory D and Weather Boiling Proof Plywood Grade 2 (WBP Grade 2) at Factory E. Both factories use two different types of drying processes; conventional drying at Factory D and kiln drying at Factory E. This inventory data was collected from two factories (D and E) representing 40% of Malaysia palm plywood industry. The inputs are mainly the raw materials which are the oil palm trunks and tropical wood veneers and the energy from diesel and electricity from grid which is mainly used for the drying process. The other inputs include water, urea formaldehyde, phenol formaldehyde, flour and melamine powder. The outputs are the biomass waste which consists of oil palm trunk off-cut and emission from boiler. Generally, all types of plywood production use almost same materials and processing methods in different quantities. Due to the different process efficiency, Factory D uses less input of raw materials and energy compared to Factory E.

Construction of Escherichia Coli Cell Factories for Production of Organic Acids and Alcohols.

PubMed

Liu, Pingping; Zhu, Xinna; Tan, Zaigao; Zhang, Xueli; Ma, Yanhe

2016-01-01

Production of bulk chemicals from renewable biomass has been proved to be sustainable and environmentally friendly. Escherichia coli is the most commonly used host strain for constructing cell factories for production of bulk chemicals since it has clear physiological and genetic characteristics, grows fast in minimal salts medium, uses a wide range of substrates, and can be genetically modified easily. With the development of metabolic engineering, systems biology, and synthetic biology, a technology platform has been established to construct E. coli cell factories for bulk chemicals production. In this chapter, we will introduce this technology platform, as well as E. coli cell factories successfully constructed for production of organic acids and alcohols.

Enhanced Learning through Electronic Communities: A Research Review.

ERIC Educational Resources Information Center

Burgstahler, Sheryl; Swift, Catherine

This report, in support of the project "Enhanced Learning through Electronic Communities," investigated successful practices of electronic communities. A literature review was conducted and a survey was sent to 15 system operators of networks that had a community-based focus with ancillary educational components and networks that focused primarily…

Production of fatty acid-derived oleochemicals and biofuels by synthetic yeast cell factories

PubMed Central

Zhou, Yongjin J.; Buijs, Nicolaas A.; Zhu, Zhiwei; Qin, Jiufu; Siewers, Verena; Nielsen, Jens

2016-01-01

Sustainable production of oleochemicals requires establishment of cell factory platform strains. The yeast Saccharomyces cerevisiae is an attractive cell factory as new strains can be rapidly implemented into existing infrastructures such as bioethanol production plants. Here we show high-level production of free fatty acids (FFAs) in a yeast cell factory, and the production of alkanes and fatty alcohols from its descendants. The engineered strain produces up to 10.4 g l−1 of FFAs, which is the highest reported titre to date. Furthermore, through screening of specific pathway enzymes, endogenous alcohol dehydrogenases and aldehyde reductases, we reconstruct efficient pathways for conversion of fatty acids to alkanes (0.8 mg l−1) and fatty alcohols (1.5 g l−1), to our knowledge the highest titres reported in S. cerevisiae. This should facilitate the construction of yeast cell factories for production of fatty acids derived products and even aldehyde-derived chemicals of high value. PMID:27222209

High Peak Power Test and Evaluation of S-band Waveguide Switches

NASA Astrophysics Data System (ADS)

Nassiri, A.; Grelick, A.; Kustom, R. L.; White, M.

1997-05-01

The injector and source of particles for the Advanced Photon Source is a 2856-MHz S-band electron-positron linear accelerator (linac) which produces electrons with energies up to 650 MeV or positrons with energies up to 450 MeV. To improve the linac rf system availability, an additional modulator-klystron subsystem is being constructed to provide a switchable hot spare unit for each of the five exsisting S-band transmitters. The switching of the transmitters will require the use of SF6-pressurized S-band waveguide switches at a peak operating power of 35 MW. Such rf switches have been successfully operated at other accelerator facilities but at lower peak powers. A test stand has been set up at the Stanford Linear Accelerator Center (SLAC) Klystron Factory to conduct tests comparing the power handling characteristics of two WR-284 and one WR-340 switches. Test results are presented and their implications for the design of the switching system are discussed.

MTBE and priority contaminant treatment with high energy electron beam injection

NASA Astrophysics Data System (ADS)

Cooper, William J.; Nickelsen, Michael G.; Mezyk, Stephen P.; Leslie, Greg; Tornatore, Paul M.; Hardison, Wayne; Hajali, Paris A.

2002-11-01

A study was conducted to examine the removal of methyl tert-butyl ether (MTBE) and 15 other organic compounds, as well as perchlorate ion, in waters of different quality. The 15 organic compounds consisted of halogenated solvents (chlorination), disinfection by-products, pesticides, and nitrosodimethylamine (NDMA). These studies were conducted using a pilot scale 20 kW mobile electron beam system at Water Factory 21, Orange County, CA where wastewater is treated and re-injected into the ground as a barrier to salt water intrusion. Future applications for this treated water include water reuse. Ground water and treated wastewater, after having gone through a reverse osmosis-polishing step (RO permeate), were used to prepare mixtures of the compounds. Using fundamental radiation chemistry, it was possible to examine the factors effecting removal efficiency of all the compounds as well as MTBE destruction and reaction by-product formation and removal. All of the organic compounds were destroyed in the studies and we also observed the destruction of perchlorate ion in one of the waters.

Control system renewal for efficient operation in RIKEN 18 GHz electron cyclotron resonance ion source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uchiyama, A., E-mail: a-uchi@riken.jp; Ozeki, K.; Higurashi, Y.

A RIKEN 18 GHz electron cyclotron resonance ion source (18 GHz ECRIS) is used as an external ion source at the Radioactive Ion Beam Factory (RIBF) accelerator complex to produce an intense beam of medium-mass heavy ions (e.g., Ca and Ar). In most components that comprise the RIBF, the control systems (CSs) are integrated by the Experimental Physics and Industrial Control System (EPICS). On the other hand, a non-EPICS-based system has hardwired controllers, and it is used in the 18 GHz ECRIS CS as an independent system. In terms of efficient and effective operation, the 18 GHz ECRIS CS asmore » well as the RIBF CS should be renewed using EPICS. Therefore, we constructed an 18 GHz ECRIS CS by using programmable logic controllers with embedded EPICS technology. In the renewed system, an operational log system was developed as a new feature, for supporting of the 18 GHz ECRIS operation.« less

Performance test of electron cyclotron resonance ion sources for the Hyogo Ion Beam Medical Center

NASA Astrophysics Data System (ADS)

Sawada, K.; Sawada, J.; Sakata, T.; Uno, K.; Okanishi, K.; Harada, H.; Itano, A.; Higashi, A.; Akagi, T.; Yamada, S.; Noda, K.; Torikoshi, M.; Kitagawa, A.

2000-02-01

Two electron cyclotron resonance (ECR) ion sources were manufactured for the accelerator facility at the Hyogo Ion Beam Medical Center. H2+, He2+, and C4+ were chosen as the accelerating ions because they have the highest charge to mass ratio among ion states which satisfy the required intensity and quality. The sources have the same structure as the 10 GHz ECR source at the Heavy Ion Medical Accelerator in Chiba except for a few improvements in the magnetic structure. Their performance was investigated at the Sumitomo Heavy Industries factory before shipment. The maximum intensity was 1500 μA for H2+, 1320 μA for He2+, and 580 μA for C4+ at the end of the ion source beam transport line. These are several times higher than required. Sufficient performance was also observed in the flatness and long-term stability of the pulsed beams. These test results satisfy the requirements for medical use.

Understanding the Impact of Field-Emitter Characteristics on Electron Beam Focusing in the VAPoR Time-of-Fight Mass Spectrometer

NASA Technical Reports Server (NTRS)

Southard, Adrian E.; Getty, Stephanie A.; Costen, Nicholas P.; Hidrobo, Gregory B.; Glavin, Daniel P.

2013-01-01

Simulations of field emission of electrons from an electron gun are used to determine the angular distribution of the emitted electron beam and the percentage of charge transmitted through the grid. The simulations are a first step towards understanding the spherical aberration present after focusing the electron beam. The effect of offset of the cathode with respect to the grid and the separation between cathode and grid on the angular distributions of emitted electrons and transmission of the grid are explored.

Improved management of acute kidney injury in primary care using e-alerts and an educational outreach programme.

PubMed

Tollitt, James; Flanagan, Emma; McCorkindale, Sheila; Glynn-Atkins, Sam; Emmett, Lauren; Darby, Denise; Ritchie, James; Bennett, Brandon; Sinha, Smeeta; Poulikakos, Dimitrios

2018-04-28

Acute kidney injury (AKI) detected in primary care is associated with increased morbidity and mortality. AKI electronic alerts (e-alerts) and educational programmes have recently been implemented but their contribution to improve AKI care is unknown. This project aimed to improve response to AKI detected in primary care and used a factorial design to evaluate the impact of the UK National Health Service (NHS) AKI e-alert and AKI educational outreach sessions on time to response to primary care AKI stages 2 and 3 between April and August 2016. A total of 46 primary care practices were randomized into four groups. A 2 × 2 factorial design exposed each group to different combinations of two interventions. The primary outcome was 'time to repeat test' or hospitalization following AKI e-alert for stages 2 and 3. Yates algorithm was used to evaluate the impact of each intervention. Time to response and mortality pre- and post-intervention were analysed using Mann-Whitney U test and chi-square test respectively. The factorial design included two interventions: an AKI educational outreach programme and the NHS AKI e-alerts. 1807 (0.8%) primary care blood tests demonstrated AKI 1-3 (78.3% stage 1, 14.8% stage 2, 6.9% stage 3). There were 391 stage 2 and 3 events from 251 patients. E-alerts demonstrated a reduction in mean response time (-29 hours). Educational outreach had a smaller effect (-3 hours). Median response time to AKI 2 and 3 pre- and post-interventions was 27 hours versus 16 hours respectively (P = 0.037). Stage 2 and 3 event-related 30-day all-cause mortality decreased following the interventions (15.6% versus 3.9% P = 0.036). AKI e-alerts in primary care hasten response to AKI 2 and 3 and reduce all-cause mortality. Educational outreach sessions further improve response time.

Disassembly factories for electrical and electronic products to recover resources in product and material cycles.

PubMed

Basdere, Bahadir; Seliger, Guenther

2003-12-01

Cycle economy as a paradigm for industry in the 21st century depends on the economical and ecological treatment of limited resources. The objective is to achieve more use with fewer resources to increase the use-productivity of these resources. The European Union, aware of the adverse environmental impacts associated with electrical and electronic consumer goods in particular, has passed legislation regulating their appropriate end-of-life treatment. Adaptation processes, including essential disassembly and re-assembly operations, contribute significantly toward the economical fulfillment of these new legal requirements. Typically, the disassembly of used products is characterized by a high rate of manual operations, wide variety of product types, and unknown product properties. To cope with such demands, life cycle units or product accompanying information systems, are being developed and used for acquiring data about a specific product throughout its life cycle to aid in determining the level of product deterioration. Modular disassembly processes and tools have been developed and realized to enable the handling of multiple productvariants. They are being implemented in prototypical hybrid disassembly systemsfor large- and small-size electrical and electronic consumer goods.

It Cuts Both Ways: Workers, Management and the Construction of a "Community of Fate" on the Shop Floor in a Mexican Garment Factory

ERIC Educational Resources Information Center

Videla, Nancy Plankey

2006-01-01

Most studies of lean production are based on surveys of managers. This article examines the labor process under lean production at a high-end garment factory in Central Mexico through ethnographic research, consisting of nine months of work at the factory, and in-depth interviews with 25 managers and 26 workers. The author found that…

Iterative learning control with applications in energy generation, lasers and health care

PubMed Central

Tutty, O. R.

2016-01-01

Many physical systems make repeated executions of the same finite time duration task. One example is a robot in a factory or warehouse whose task is to collect an object in sequence from a location, transfer it over a finite duration, place it at a specified location or on a moving conveyor and then return for the next one and so on. Iterative learning control was especially developed for systems with this mode of operation and this paper gives an overview of this control design method using relatively recent relevant applications in wind turbines, free-electron lasers and health care, as exemplars to demonstrate its applicability. PMID:27713654

Methods for characterizing plant fibers.

PubMed

Cruthers, Natasha; Carr, Debra; Niven, Brian; Girvan, Elizabeth; Laing, Raechel

2005-08-01

The effectiveness of different microscopy techniques for measuring the dimensions of ultimate fibers from harakeke (Phormium tenax, New Zealand flax) was investigated using a factorial experimental design. Constant variables were geographical location, location of specimens along the leaf, season (winter), individual plant, a fourth leaf from a north-facing fan, age of plant, and cultivars (two). Experimental variables were microscopy techniques and measurement axis. Measurements of width and length of harakeke ultimate fibers depended on the microscopic preparation/technique used as well as the cultivar examined. The best methods were (i) transverse sections of leaf specimens 4 microm thick, embedded in Paraplast and observed using light microscopy, and (ii) nonfixed ultimate fibers observed using scanning electron microscopy. (c) 2005 Wiley-Liss, Inc.

The 9-item Bergen Burnout Inventory: Factorial Validity Across Organizations and Measurements of Longitudinal Data

PubMed Central

Feldt, Taru; RANTANEN, Johanna; HYVÖNEN, Katriina; MÄKIKANGAS, Anne; HUHTALA, Mari; PIHLAJASAARI, Pia; KINNUNEN, Ulla

2013-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9)1). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times. PMID:24366535

River pollution remediation monitored by optical and infrared high-resolution satellite images.

PubMed

Trivero, Paolo; Borasi, Maria; Biamino, Walter; Cavagnero, Marco; Rinaudo, Caterina; Bonansea, Matias; Lanfri, Sofia

2013-09-01

The Bormida River Basin, located in the northwestern region of Italy, has been strongly contaminated by the ACNA chemical factory. This factory was in operation from 1892 to 1998, and contamination from the factory has had deleterious consequences on the water quality, agriculture, natural ecosystems and human health. Attempts have been made to remediate the site. The aims of this study were to use high-resolution satellite images combined with a classical remote sensing methodology to monitor vegetation conditions along the Bormida River, both upstream and downstream of the ACNA chemical factory site, and to compare the results obtained at different times before and after the remediation process. The trends of the Normalised Difference Vegetation Index (NDVI) and the Enhanced Vegetation Index (EVI) along the riverbanks are used to assess the effect of water pollution on vegetation. NDVI and EVI values show that the contamination produced by the ACNA factory had less severe effects in the year 2007, when most of the remediation activities were concluded, than in 2006 and 2003. In 2007, the contamination effects were noticeable up to 6 km downstream of the factory, whereas in 2003 and 2006 the influence range was up to about 12 km downstream of the factory. The results of this study show the effectiveness of remediation activities that have been taking place in this area. In addition, the comparison between NDVI and EVI shows that the EVI is more suitable to characterise the vegetation health and can be considered an additional tool to assess vegetation health and to monitor restoration activities.

Gamma-ray generation in the interaction of two tightly focused laser pulses with a low-density target composed of electrons

NASA Astrophysics Data System (ADS)

Jirka, M.; Klimo, O.; Weber, S.; Bulanov, Sergei V.; Esirkepov, Timur Zh.; Korn, G.

2015-05-01

With the continuing development of laser systems, new important and so-far unexplored fields of research related to interaction of ultra-intense laser beams with matter are opening. At intensities of the order of 1022 W=cm2, electrons may be accelerated in the electromagnetic field of the laser wave and achieve such a high energy that they can enter the regime affected by the radiation reaction. Due to the non-linear Thomson and Compton scattering the accelerated electrons emit photons. The interaction of emitted photons with the laser field may result in effective generation of electron-positron pairs by means of the Breit-Wheeler process. In this work we study the influence of laser pulse polarization on gamma-ray generation during interaction of two colliding and tightly focused laser pulses with a low density target composed of electrons. This paper focuses on evolution of electron trajectories and key parameters χe (probability of photon emission) and χγ(probability of pair generation) in the laser field. These interactions are studied using 2D PIC simulations. It is shown that in the case of circularly polarized and tightly focused laser beams, electrons are not following circular trajectories at the magnetic node of the standing wave established in the focus, which leads to lowering the radiation emission efficiency.

Guiding and focusing of fast electron beams produced by ultra-intense laser pulse using a double cone funnel target

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Wen-shuai; Cai, Hong-bo, E-mail: Cai-hongbo@iapcm.ac.cn; HEDPS, Center for Applied Physics and Technology, Peking University, Beijing 100871

A novel double cone funnel target design aiming at efficiently guiding and focusing fast electron beams produced in high intensity (>10{sup 19 }W/cm{sup 2}) laser-solid interactions is investigated via two-dimensional particle-in-cell simulations. The forward-going fast electron beams are shown to be directed and focused to a smaller size in comparison with the incident laser spot size. This plasma funnel attached on the cone target guides and focuses electrons in a manner akin to the control of liquid by a plastic funnel. Such device has the potential to add substantial design flexibility and prevent inefficiencies for important applications such as fast ignition.more » Two reasons account for the collimation of fast electron beams. First, the sheath electric fields and quasistatic magnetic fields inside the vacuum gap of the double cone provide confinement of the fast electrons in the laser-plasma interaction region. Second, the interface magnetic fields inside the beam collimator further guide and focus the fast electrons during the transport. The application of this technique to cone-guided fast ignition is considered, and it is shown that it can enhance the laser energy deposition in the compressed fuel plasma by a factor of 2 in comparison with the single cone target case.« less

Microbially induced and microbially catalysed precipitation: two different carbonate factories

NASA Astrophysics Data System (ADS)

Meister, Patrick

2016-04-01

The landmark paper by Schlager (2003) has revealed three types of benthic carbonate production referred to as "carbonate factories", operative at different locations at different times in Earth history. The tropical or T-factory comprises the classical platforms and fringing reefs and is dominated by carbonate precipitation by autotrophic calcifying metazoans ("biotically controlled" precipitation). The cool or C-factory is also biotically controlled but via heterotrophic, calcifying metazoans in cold and deep waters at the continental margins. A further type is the mud-mound or M-factory, where carbonate precipitation is supported by microorganisms but not controlled by a specific enzymatic pathway ("biotically induced" precipitation). How exactly the microbes influence precipitation is still poorly understood. Based on recent experimental and field studies, the microbial influence on modern mud mound and microbialite growth includes two fundamentally different processes: (1) Metabolic activity of microbes may increase the saturation state with respect to a particular mineral phase, thereby indirectly driving the precipitation of the mineral phase: microbially induced precipitation. (2) In a situation, where a solution is already supersaturated but precipitation of the mineral is inhibited by a kinetic barrier, microbes may act as a catalyser, i.e. they lower the kinetic barrier: microbially catalysed precipitation. Such a catalytic effect can occur e.g. via secreted polymeric substances or specific chemical groups on the cell surface, at which the minerals nucleate or which facilitate mechanistically the bonding of new ions to the mineral surface. Based on these latest developments in microbialite formation, I propose to extend the scheme of benthic carbonate factories of Schlager et al. (2003) by introducing an additional branch distinguishing microbially induced from microbially catalysed precipitation. Although both mechanisms could be operative in a M-factory, and it is difficult to distinguish their products, their cause is very different. A Mi-factory ("i" for induced) is predominant under low carbonate saturation in normal seawater; a Mc-factory ("c" for catalysed) is operative in higher-alkalinity waters. The latter conditions may not only occur in shallow seas restricted from open sea water but may also have occurred in the aftermath of catastrophic events (e.g. P/T boundary) or during the Precambrian, before the onset of metazoan calcifiers. Thus, adding the additional distinction between microbially induced and microbially catalysed precipitation would allow the application of Schlager's concept of benthic carbonate factories beyond the Phanerozoic and probably over the entire Earth history.

Time-of-flight measurement of ionic species generated during ablation for optimization of focusing condition at free-electron laser beamline

NASA Astrophysics Data System (ADS)

Senba, Y.; Nagasono, M.; Koyama, T.; Yumoto, H.; Ohashi, H.; Tono, K.; Togashi, T.; Inubushi, Y.; Sato, T.; Yabashi, M.; Ishikawa, T.

2013-03-01

Optimization of focusing conditions is important in free-electron laser applications. A time-of-flight mass analyzer has been designed and constructed for this purpose. The time-of-flight spectra of ionic species evolved from laser ablation of gold were measured. The yields of ionic species showed strong correlations with free-electron-laser intensity. This method conveniently allows for direct estimation of laser intensity on sample and determination of focusing position.

The neonatal brain in critical congenital heart disease: Insights and future directions.

PubMed

Peyvandi, Shabnam; Latal, Beatrice; Miller, Steven P; McQuillen, Patrick S

2018-05-19

Neurodevelopmental outcomes are impaired in survivors of critical congenital heart disease (CHD) in several developmental domains including motor, cognitive and sensory outcomes. These deficits can extend into the adolescent and early adulthood years. The cause of these neurodevelopmental impairments is multi-factorial and includes patient specific risk factors, cardiac anatomy and physiology as well as brain changes seen on MRI. Advances in imaging techniques have identified delayed brain development in the neonate with critical CHD as well as acquired brain injury. These abnormalities are seen even before corrective neonatal cardiac surgery. This review focuses on describing brain changes seen on MRI in neonates with CHD, risk factors for these changes and the association with neurodevelopmental outcome. There is an emerging focus on the impact of cardiovascular physiology on brain health and the complex heart-brain interplay that influences ultimate neurodevelopmental outcome in these patients. Copyright © 2018. Published by Elsevier Inc.

Dyadic coping in Latino couples: validity of the Spanish version of the Dyadic Coping Inventory.

PubMed

Falconier, Mariana Karin; Nussbeck, Fridtjof; Bodenmann, Guy

2013-01-01

This study seeks to validate the Spanish version of the Dyadic Coping Inventory (DCI) in a Latino population with data from 113 heterosexual couples. Results for both partners confirm the factorial structure for the Spanish version (Subscales: Stress Communication, Emotion- and Problem-Focused Supportive, Delegated, and Negative Dyadic Coping, Emotion- and Problem-Focused Common Dyadic Coping, and Evaluation of Dyadic Coping; Aggregated Scales: Dyadic Coping by Oneself and by Partner) and support the discriminant validity of its subscales and the concurrent, and criterion validity of the subscales and aggregated scales. These results do not only indicate that the Spanish version of the DCI can be used reliably as a measure of coping in Spanish-speaking Latino couples, but they also suggest that this group relies on dyadic coping frequently and that this type of coping is associated with positive relationship functioning and individual coping. Limitations and implications are discussed.

Advances of air pollution science: from forest decline to multiple-stress effects on forest ecosystem services.

PubMed

Paoletti, E; Schaub, M; Matyssek, R; Wieser, G; Augustaitis, A; Bastrup-Birk, A M; Bytnerowicz, A; Günthardt-Goerg, M S; Müller-Starck, G; Serengil, Y

2010-06-01

Over the past 20 years, the focus of forest science on air pollution has moved from forest decline to a holistic framework of forest health, and from the effects on forest production to the ecosystem services provided by forest ecosystems. Hence, future research should focus on the interacting factorial impacts and resulting antagonistic and synergistic responses of forest trees and ecosystems. The synergistic effects of air pollution and climatic changes, in particular elevated ozone, altered nitrogen, carbon and water availability, must be key issues for research. Present evidence suggests air pollution will become increasingly harmful to forests under climate change, which requires integration amongst various stressors (abiotic and biotic factors, including competition, parasites and fire), effects on forest services (production, biodiversity protection, soil protection, sustained water balance, socio-economical relevance) and assessment approaches (research, monitoring, modeling) to be fostered. Copyright 2009 Elsevier Ltd. All rights reserved.

What makes pregnant workers sick: why, when, where and how? An exploratory study in the ready-made garment industry in Bangladesh.

PubMed

Akhter, Sadika; Rutherford, Shannon; Chu, Cordia

2017-10-30

Bangladesh has made significant progress in reducing maternal mortality. Many factors have contributed to this; one is the socio-economic development of the country. The ready-made garment industry is at the forefront of this development creating employment for many women. However, the work environment has the potential to create health problems, particularly for vulnerable groups such as pregnant women. This paper explores perceptions of health problems during pregnancy of factory workers, in this important industry in Bangladesh. This study was conducted in four factories using qualitative research methods to provide a view of pregnant workers' health risks beyond a bio-medical approach. Data was collected through in-depth interviews of pregnant workers and observations of their homes and workplaces. Further, key informant interviews with factory health care providers, government officials and employers revealed different perspectives and experiences. Data was collected in the local language (Bengali), then transcribed and analysed using a framework analysis approach. Female workers reported that participation in paid work created an opportunity for them to earn money but pregnancy and the nature of the job, including being pressured to meet the production quota, pressure to leave the job because of their pregnancy and withholding of maternity benefits, cause stress, anxiety and may contribute to hypertensive disorders of pregnancy. This was confirmed by factory doctors who suggested that developing hypertensive disorders during pregnancy was influenced by the nature of work and stress. The employers seemed focused on profit and meeting quotas and the health of pregnant workers appeared to be a lower priority. This study found that the government lacks the resources to understand the extent of the problem or the level of compliance with maternity related regulations. These results indicate the vulnerability of female workers to physical and mental stress at work and associations with their health problems during pregnancy. It identifies the deficiencies of family, workplace and health service support for these pregnant workers, highlighting the urgent need for government and non-government organisations to work with this important export industry to improve health surveillance and monitoring and the enforcement of existing laws to protect the rights and conditions of pregnant women.

NREL Joins Initiative to Boost Power Electronics Energy Efficiency and Job

Science.gov Websites

Electronics and Electric Machines team, which focuses on vehicle component research and development (R&D current silicon-based components in the next five years. The institute will bring partners together to power electronics thermal management and reliability R&D, NREL's research in this area focuses on

Scrambled Sobol Sequences via Permutation

DTIC Science & Technology

2009-01-01

LCG LCG64 LFG MLFG PMLCG Sobol Scrambler PermutationScrambler LinearScrambler <<uses>> PermuationFactory StaticFactory DynamicFactory <<uses>> Figure 3...Phy., 19:252–256, 1979. [2] Emanouil I. Atanassov. A new efficient algorithm for generating the scrambled sobol ’ sequence. In NMA ’02: Revised Papers...Deidre W.Evan, and Micheal Mascagni. On the scrambled sobol sequence. In ICCS2005, pages 775–782, 2005. [7] Richard Durstenfeld. Algorithm 235: Random

On the distribution of uranium in hair: Non-destructive analysis using synchrotron radiation induced X-ray fluorescence microprobe techniques

NASA Astrophysics Data System (ADS)

Israelsson, A.; Eriksson, M.; Pettersson, H. B. L.

2015-06-01

In the present study the distribution of uranium in single human hair shafts has been evaluated using two synchrotron radiation (SR) based micro X-ray fluorescence techniques; SR μ-XRF and confocal SR μ-XRF. The hair shafts originated from persons that have been exposed to elevated uranium concentrations. Two different groups have been studied, i) workers at a nuclear fuel fabrication factory, exposed mainly by inhalation and ii) owners of drilled bedrock wells exposed by ingestion of water. The measurements were carried out on the FLUO beamline at the synchrotron radiation facility ANKA, Karlsruhe. The experiment was optimized to detect U with a beam size of 6.8 μm × 3 μm beam focus allowing detection down to ppb levels of U in 10 s (SR μ-XRF setup) and 70 s (SR confocal μ-XRF setup) measurements. It was found that the uranium was present in a 10-15 μm peripheral layer of the hair shafts for both groups studied. Furthermore, potential external hair contamination was studied by scanning of unwashed hair shafts from the workers. Sites of very high uranium signal were identified as particles containing uranium. Such particles, were also seen in complementary analyses using variable pressure electron microscope coupled with energy dispersive X-ray analyzer (ESEM-EDX). However, the particles were not visible in washed hair shafts. These findings can further increase the understanding of uranium excretion in hair and its potential use as a biomonitor.

Exotic decays of the 125 GeV Higgs boson at future e+e- colliders

NASA Astrophysics Data System (ADS)

Liu, Zhen; Wang, Lian-Tao; Zhang, Hao

2017-06-01

The discovery of unexpected properties of the Higgs boson would offer an intriguing opportunity to shed light on some of the most profound puzzles in particle physics. Beyond Standard Model (BSM) decays of the Higgs boson could reveal new physics in a direct manner. Future electron-positron lepton colliders operating as Higgs factories, including CEPC, FCC-ee and ILC, with the advantages of a clean collider environment and large statistics, could greatly enhance sensitivity in searching for these BSM decays. In this work, we perform a general study of Higgs exotic decays at future e+e- lepton colliders, focusing on the Higgs decays with hadronic final states and/or missing energy, which are very challenging for the High-Luminosity program of the Large Hadron Collider (HL-LHC). We show that with simple selection cuts, (10-3-10-5) limits on the Higgs exotic decay branching fractions can be achieved using the leptonic decaying spectator Z boson in the associated production mode e+e-→ ZH. We further discuss the interplay between detector performance and Higgs exotic decays, and other possibilities of exotic decays. Our work is a first step in a comprehensive study of Higgs exotic decays at future lepton colliders, which is a key area of Higgs physics that deserves further investigation. Supported by Fermi Research Alliance, LLC (DE-AC02-07CH11359) with the U.S. Department of Energy, DOE (DE-SC0013642), IHEP(Y6515580U1), and IHEP Innovation (Y4545171Y2)

The Physics of the B Factories

NASA Astrophysics Data System (ADS)

Bevan, A. J.; Golob, B.; Mannel, Th.; Prell, S.; Yabsley, B. D.; Aihara, H.; Anulli, F.; Arnaud, N.; Aushev, T.; Beneke, M.; Beringer, J.; Bianchi, F.; Bigi, I. I.; Bona, M.; Brambilla, N.; Brodzicka, J.; Chang, P.; Charles, M. J.; Cheng, C. H.; Cheng, H.-Y.; Chistov, R.; Colangelo, P.; Coleman, J. P.; Drutskoy, A.; Druzhinin, V. P.; Eidelman, S.; Eigen, G.; Eisner, A. M.; Faccini, R.; Flood, K. T.; Gambino, P.; Gaz, A.; Gradl, W.; Hayashii, H.; Higuchi, T.; Hulsbergen, W. D.; Hurth, T.; Iijima, T.; Itoh, R.; Jackson, P. D.; Kass, R.; Kolomensky, Yu. G.; Kou, E.; Križan, P.; Kronfeld, A.; Kumano, S.; Kwon, Y. J.; Latham, T. E.; Leith, D. W. G. S.; Lüth, V.; Martinez-Vidal, F.; Meadows, B. T.; Mussa, R.; Nakao, M.; Nishida, S.; Ocariz, J.; Olsen, S. L.; Pakhlov, P.; Pakhlova, G.; Palano, A.; Pich, A.; Playfer, S.; Poluektov, A.; Porter, F. C.; Robertson, S. H.; Roney, J. M.; Roodman, A.; Sakai, Y.; Schwanda, C.; Schwartz, A. J.; Seidl, R.; Sekula, S. J.; Steinhauser, M.; Sumisawa, K.; Swanson, E. S.; Tackmann, F.; Trabelsi, K.; Uehara, S.; Uno, S.; van de Water, R.; Vasseur, G.; Verkerke, W.; Waldi, R.; Wang, M. Z.; Wilson, F. F.; Zupan, J.; Zupanc, A.; Adachi, I.; Albert, J.; Banerjee, Sw.; Bellis, M.; Ben-Haim, E.; Biassoni, P.; Cahn, R. N.; Cartaro, C.; Chauveau, J.; Chen, C.; Chiang, C. C.; Cowan, R.; Dalseno, J.; Davier, M.; Davies, C.; Dingfelder, J. C.; Echenard, B.; Epifanov, D.; Fulsom, B. G.; Gabareen, A. M.; Gary, J. W.; Godang, R.; Graham, M. T.; Hafner, A.; Hamilton, B.; Hartmann, T.; Hayasaka, K.; Hearty, C.; Iwasaki, Y.; Khodjamirian, A.; Kusaka, A.; Kuzmin, A.; Lafferty, G. D.; Lazzaro, A.; Li, J.; Lindemann, D.; Long, O.; Lusiani, A.; Marchiori, G.; Martinelli, M.; Miyabayashi, K.; Mizuk, R.; Mohanty, G. B.; Muller, D. R.; Nakazawa, H.; Ongmongkolkul, P.; Pacetti, S.; Palombo, F.; Pedlar, T. K.; Piilonen, L. E.; Pilloni, A.; Poireau, V.; Prothmann, K.; Pulliam, T.; Rama, M.; Ratcliff, B. N.; Roudeau, P.; Schrenk, S.; Schroeder, T.; Schubert, K. R.; Shen, C. P.; Shwartz, B.; Soffer, A.; Solodov, E. P.; Somov, A.; Starič, M.; Stracka, S.; Telnov, A. V.; Todyshev, K. Yu.; Tsuboyama, T.; Uglov, T.; Vinokurova, A.; Walsh, J. J.; Watanabe, Y.; Won, E.; Wormser, G.; Wright, D. H.; Ye, S.; Zhang, C. C.; Abachi, S.; Abashian, A.; Abe, K.; Abe, N.; Abe, R.; Abe, T.; Abrams, G. S.; Adam, I.; Adamczyk, K.; Adametz, A.; Adye, T.; Agarwal, A.; Ahmed, H.; Ahmed, M.; Ahmed, S.; Ahn, B. S.; Ahn, H. S.; Aitchison, I. J. R.; Akai, K.; Akar, S.; Akatsu, M.; Akemoto, M.; Akhmetshin, R.; Akre, R.; Alam, M. S.; Albert, J. N.; Aleksan, R.; Alexander, J. P.; Alimonti, G.; Allen, M. T.; Allison, J.; Allmendinger, T.; Alsmiller, J. R. G.; Altenburg, D.; Alwyn, K. E.; An, Q.; Anderson, J.; Andreassen, R.; Andreotti, D.; Andreotti, M.; Andress, J. C.; Angelini, C.; Anipko, D.; Anjomshoaa, A.; Anthony, P. L.; Antillon, E. A.; Antonioli, E.; Aoki, K.; Arguin, J. F.; Arinstein, K.; Arisaka, K.; Asai, K.; Asai, M.; Asano, Y.; Asgeirsson, D. J.; Asner, D. M.; Aso, T.; Aspinwall, M. L.; Aston, D.; Atmacan, H.; Aubert, B.; Aulchenko, V.; Ayad, R.; Azemoon, T.; Aziz, T.; Azzolini, V.; Azzopardi, D. E.; Baak, M. A.; Back, J. J.; Bagnasco, S.; Bahinipati, S.; Bailey, D. S.; Bailey, S.; Bailly, P.; van Bakel, N.; Bakich, A. M.; Bala, A.; Balagura, V.; Baldini-Ferroli, R.; Ban, Y.; Banas, E.; Band, H. R.; Banerjee, S.; Baracchini, E.; Barate, R.; Barberio, E.; Barbero, M.; Bard, D. J.; Barillari, T.; Barlow, N. R.; Barlow, R. J.; Barrett, M.; Bartel, W.; Bartelt, J.; Bartoldus, R.; Batignani, G.; Battaglia, M.; Bauer, J. M.; Bay, A.; Beaulieu, M.; Bechtle, P.; Beck, T. W.; Becker, J.; Becla, J.; Bedny, I.; Behari, S.; Behera, P. K.; Behn, E.; Behr, L.; Beigbeder, C.; Beiline, D.; Bell, R.; Bellini, F.; Bellodi, G.; Belous, K.; Benayoun, M.; Benelli, G.; Benitez, J. F.; Benkebil, M.; Berger, N.; Bernabeu, J.; Bernard, D.; Bernet, R.; Bernlochner, F. U.; Berryhill, J. W.; Bertsche, K.; Besson, P.; Best, D. S.; Bettarini, S.; Bettoni, D.; Bhardwaj, V.; Bhimji, W.; Bhuyan, B.; Biagini, M. E.; Biasini, M.; van Bibber, K.; Biesiada, J.; Bingham, I.; Bionta, R. M.; Bischofberger, M.; Bitenc, U.; Bizjak, I.; Blanc, F.; Blaylock, G.; Blinov, V. E.; Bloom, E.; Bloom, P. C.; Blount, N. L.; Blouw, J.; Bly, M.; Blyth, S.; Boeheim, C. T.; Bomben, M.; Bondar, A.; Bondioli, M.; Bonneaud, G. R.; Bonvicini, G.; Booke, M.; Booth, J.; Borean, C.; Borgland, A. W.; Borsato, E.; Bosi, F.; Bosisio, L.; Botov, A. A.; Bougher, J.; Bouldin, K.; Bourgeois, P.; Boutigny, D.; Bowerman, D. A.; Boyarski, A. M.; Boyce, R. F.; Boyd, J. T.; Bozek, A.; Bozzi, C.; Bračko, M.; Brandenburg, G.; Brandt, T.; Brau, B.; Brau, J.; Breon, A. B.; Breton, D.; Brew, C.; Briand, H.; Bright-Thomas, P. G.; Brigljević, V.; Britton, D. I.; Brochard, F.; Broomer, B.; Brose, J.; Browder, T. E.; Brown, C. L.; Brown, C. M.; Brown, D. N.; Browne, M.; Bruinsma, M.; Brunet, S.; Bucci, F.; Buchanan, C.; Buchmueller, O. L.; Bünger, C.; Bugg, W.; Bukin, A. D.; Bula, R.; Bulten, H.; Burchat, P. R.; Burgess, W.; Burke, J. P.; Button-Shafer, J.; Buzykaev, A. R.; Buzzo, A.; Cai, Y.; Calabrese, R.; Calcaterra, A.; Calderini, G.; Camanzi, B.; Campagna, E.; Campagnari, C.; Capra, R.; Carassiti, V.; Carpinelli, M.; Carroll, M.; Casarosa, G.; Casey, B. C. K.; Cason, N. M.; Castelli, G.; Cavallo, N.; Cavoto, G.; Cecchi, A.; Cenci, R.; Cerizza, G.; Cervelli, A.; Ceseracciu, A.; Chai, X.; Chaisanguanthum, K. S.; Chang, M. C.; Chang, Y. H.; Chang, Y. W.; Chao, D. S.; Chao, M.; Chao, Y.; Charles, E.; Chavez, C. A.; Cheaib, R.; Chekelian, V.; Chen, A.; Chen, E.; Chen, G. P.; Chen, H. F.; Chen, J.-H.; Chen, J. C.; Chen, K. F.; Chen, P.; Chen, S.; Chen, W. T.; Chen, X.; Chen, X. R.; Chen, Y. Q.; Cheng, B.; Cheon, B. G.; Chevalier, N.; Chia, Y. M.; Chidzik, S.; Chilikin, K.; Chistiakova, M. V.; Cizeron, R.; Cho, I. S.; Cho, K.; Chobanova, V.; Choi, H. H. F.; Choi, K. S.; Choi, S. K.; Choi, Y.; Choi, Y. K.; Christ, S.; Chu, P. H.; Chun, S.; Chuvikov, A.; Cibinetto, G.; Cinabro, D.; Clark, A. R.; Clark, P. J.; Clarke, C. K.; Claus, R.; Claxton, B.; Clifton, Z. C.; Cochran, J.; Cohen-Tanugi, J.; Cohn, H.; Colberg, T.; Cole, S.; Colecchia, F.; Condurache, C.; Contri, R.; Convert, P.; Convery, M. R.; Cooke, P.; Copty, N.; Cormack, C. M.; Dal Corso, F.; Corwin, L. A.; Cossutti, F.; Cote, D.; Cotta Ramusino, A.; Cottingham, W. N.; Couderc, F.; Coupal, D. P.; Covarelli, R.; Cowan, G.; Craddock, W. W.; Crane, G.; Crawley, H. B.; Cremaldi, L.; Crescente, A.; Cristinziani, M.; Crnkovic, J.; Crosetti, G.; Cuhadar-Donszelmann, T.; Cunha, A.; Curry, S.; D'Orazio, A.; Dû, S.; Dahlinger, G.; Dahmes, B.; Dallapiccola, C.; Danielson, N.; Danilov, M.; Das, A.; Dash, M.; Dasu, S.; Datta, M.; Daudo, F.; Dauncey, P. D.; David, P.; Davis, C. L.; Day, C. T.; De Mori, F.; De Domenico, G.; De Groot, N.; De la Vaissière, C.; de la Vaissière, Ch.; de Lesquen, A.; De Nardo, G.; de Sangro, R.; De Silva, A.; DeBarger, S.; Decker, F. J.; del Amo Sanchez, P.; Del Buono, L.; Del Gamba, V.; del Re, D.; Della Ricca, G.; Denig, A. G.; Derkach, D.; Derrington, I. M.; DeStaebler, H.; Destree, J.; Devmal, S.; Dey, B.; Di Girolamo, B.; Marco, E. Di; Dickopp, M.; Dima, M. O.; Dittrich, S.; Dittongo, S.; Dixon, P.; Dneprovsky, L.; Dohou, F.; Doi, Y.; Doležal, Z.; Doll, D. A.; Donald, M.; Dong, L.; Dong, L. Y.; Dorfan, J.; Dorigo, A.; Dorsten, M. P.; Dowd, R.; Dowdell, J.; Drásal, Z.; Dragic, J.; Drummond, B. W.; Dubitzky, R. S.; Dubois-Felsmann, G. P.; Dubrovin, M. S.; Duh, Y. C.; Duh, Y. T.; Dujmic, D.; Dungel, W.; Dunwoodie, W.; Dutta, D.; Dvoretskii, A.; Dyce, N.; Ebert, M.; Eckhart, E. A.; Ecklund, S.; Eckmann, R.; Eckstein, P.; Edgar, C. L.; Edwards, A. J.; Egede, U.; Eichenbaum, A. M.; Elmer, P.; Emery, S.; Enari, Y.; Enomoto, R.; Erdos, E.; Erickson, R.; Ernst, J. A.; Erwin, R. J.; Escalier, M.; Eschenburg, V.; Eschrich, I.; Esen, S.; Esteve, L.; Evangelisti, F.; Everton, C. W.; Eyges, V.; Fabby, C.; Fabozzi, F.; Fahey, S.; Falbo, M.; Fan, S.; Fang, F.; Fanin, C.; Farbin, A.; Farhat, H.; Fast, J. E.; Feindt, M.; Fella, A.; Feltresi, E.; Ferber, T.; Fernholz, R. E.; Ferrag, S.; Ferrarotto, F.; Ferroni, F.; Field, R. C.; Filippi, A.; Finocchiaro, G.; Fioravanti, E.; Firmino da Costa, J.; Fischer, P.-A.; Fisher, A. S.; Fisher, P. H.; Flacco, C. J.; Flack, R. L.; Flaecher, H. U.; Flanagan, J.; Flanigan, J. M.; Ford, K. E.; Ford, W. T.; Forster, I. J.; Forti, A. C.; Forti, F.; Fortin, D.; Foster, B.; Foulkes, S. D.; Fouque, G.; Fox, J.; Franchini, P.; Franco Sevilla, M.; Franek, B.; Frank, E. D.; Fransham, K. B.; Fratina, S.; Fratini, K.; Frey, A.; Frey, R.; Friedl, M.; Fritsch, M.; Fry, J. R.; Fujii, H.; Fujikawa, M.; Fujita, Y.; Fujiyama, Y.; Fukunaga, C.; Fukushima, M.; Fullwood, J.; Funahashi, Y.; Funakoshi, Y.; Furano, F.; Furman, M.; Furukawa, K.; Futterschneider, H.; Gabathuler, E.; Gabriel, T. A.; Gabyshev, N.; Gaede, F.; Gagliardi, N.; Gaidot, A.; Gaillard, J.-M.; Gaillard, J. R.; Galagedera, S.; Galeazzi, F.; Gallo, F.; Gamba, D.; Gamet, R.; Gan, K. K.; Gandini, P.; Ganguly, S.; Ganzhur, S. F.; Gao, Y. Y.; Gaponenko, I.; Garmash, A.; Garra Tico, J.; Garzia, I.; Gaspero, M.; Gastaldi, F.; Gatto, C.; Gaur, V.; Geddes, N. I.; Geld, T. L.; Genat, J.-F.; George, K. A.; George, M.; George, S.; Georgette, Z.; Gershon, T. J.; Gill, M. S.; Gillard, R.; Gilman, J. D.; Giordano, F.; Giorgi, M. A.; Giraud, P.-F.; Gladney, L.; Glanzman, T.; Glattauer, R.; Go, A.; Goetzen, K.; Goh, Y. M.; Gokhroo, G.; Goldenzweig, P.; Golubev, V. B.; Gopal, G. P.; Gordon, A.; Gorišek, A.; Goriletsky, V. I.; Gorodeisky, R.; Gosset, L.; Gotow, K.; Gowdy, S. J.; Graffin, P.; Grancagnolo, S.; Grauges, E.; Graziani, G.; Green, M. G.; Greene, M. G.; Grenier, G. J.; Grenier, P.; Griessinger, K.; Grillo, A. A.; Grinyov, B. V.; Gritsan, A. V.; Grosdidier, G.; Grosse Perdekamp, M.; Grosso, P.; Grothe, M.; Groysman, Y.; Grünberg, O.; Guido, E.; Guler, H.; Gunawardane, N. J. W.; Guo, Q. H.; Guo, R. S.; Guo, Z. J.; Guttman, N.; Ha, H.; Ha, H. C.; Haas, T.; Haba, J.; Hachtel, J.; Hadavand, H. K.; Hadig, T.; Hagner, C.; Haire, M.; Haitani, F.; Haji, T.; Haller, G.; Halyo, V.; Hamano, K.; Hamasaki, H.; Hamel de Monchenault, G.; Hamilton, J.; Hamilton, R.; Hamon, O.; Han, B. Y.; Han, Y. L.; Hanada, H.; Hanagaki, K.; Handa, F.; Hanson, J. E.; Hanushevsky, A.; Hara, K.; Hara, T.; Harada, Y.; Harrison, P. F.; Harrison, T. J.; Harrop, B.; Hart, A. J.; Hart, P. A.; Hartfiel, B. L.; Harton, J. L.; Haruyama, T.; Hasan, A.; Hasegawa, Y.; Hast, C.; Hastings, N. C.; Hasuko, K.; Hauke, A.; Hawkes, C. M.; Hayashi, K.; Hazumi, M.; Hee, C.; Heenan, E. M.; Heffernan, D.; Held, T.; Henderson, R.; Henderson, S. W.; Hertzbach, S. S.; Hervé, S.; Heß, M.; Heusch, C. A.; Hicheur, A.; Higashi, Y.; Higasino, Y.; Higuchi, I.; Hikita, S.; Hill, E. J.; Himel, T.; Hinz, L.; Hirai, T.; Hirano, H.; Hirschauer, J. F.; Hitlin, D. G.; Hitomi, N.; Hodgkinson, M. C.; Höcker, A.; Hoi, C. T.; Hojo, T.; Hokuue, T.; Hollar, J. J.; Hong, T. M.; Honscheid, K.; Hooberman, B.; Hopkins, D. A.; Horii, Y.; Hoshi, Y.; Hoshina, K.; Hou, S.; Hou, W. S.; Hryn'ova, T.; Hsiung, Y. B.; Hsu, C. L.; Hsu, S. C.; Hu, H.; Hu, T.; Huang, H. C.; Huang, T. J.; Huang, Y. C.; Huard, Z.; Huffer, M. E.; Hufnagel, D.; Hung, T.; Hutchcroft, D. E.; Hyun, H. J.; Ichizawa, S.; Igaki, T.; Igarashi, A.; Igarashi, S.; Igarashi, Y.; Igonkina, O.; Ikado, K.; Ikeda, H.; Ikeda, H.; Ikeda, K.; Ilic, J.; Inami, K.; Innes, W. R.; Inoue, Y.; Ishikawa, A.; Ishino, H.; Itagaki, K.; Itami, S.; Itoh, K.; Ivanchenko, V. N.; Iverson, R.; Iwabuchi, M.; Iwai, G.; Iwai, M.; Iwaida, S.; Iwamoto, M.; Iwasaki, H.; Iwasaki, M.; Iwashita, T.; Izen, J. M.; Jackson, D. J.; Jackson, F.; Jackson, G.; Jackson, P. S.; Jacobsen, R. G.; Jacoby, C.; Jaegle, I.; Jain, V.; Jalocha, P.; Jang, H. K.; Jasper, H.; Jawahery, A.; Jayatilleke, S.; Jen, C. M.; Jensen, F.; Jessop, C. P.; Ji, X. B.; John, M. J. J.; Johnson, D. R.; Johnson, J. R.; Jolly, S.; Jones, M.; Joo, K. K.; Joshi, N.; Joshi, N. J.; Judd, D.; Julius, T.; Kadel, R. W.; Kadyk, J. A.; Kagan, H.; Kagan, R.; Kah, D. H.; Kaiser, S.; Kaji, H.; Kajiwara, S.; Kakuno, H.; Kameshima, T.; Kaminski, J.; Kamitani, T.; Kaneko, J.; Kang, J. H.; Kang, J. S.; Kani, T.; Kapusta, P.; Karbach, T. M.; Karolak, M.; Karyotakis, Y.; Kasami, K.; Katano, G.; Kataoka, S. U.; Katayama, N.; Kato, E.; Kato, Y.; Kawai, H.; Kawai, M.; Kawamura, N.; Kawasaki, T.; Kay, J.; Kay, M.; Kelly, M. P.; Kelsey, M. H.; Kent, N.; Kerth, L. T.; Khan, A.; Khan, H. R.; Kharakh, D.; Kibayashi, A.; Kichimi, H.; Kiesling, C.; Kikuchi, M.; Kikutani, E.; Kim, B. H.; Kim, C. H.; Kim, D. W.; Kim, H.; Kim, H. J.; Kim, H. O.; Kim, H. W.; Kim, J. B.; Kim, J. H.; Kim, K. T.; Kim, M. J.; Kim, P.; Kim, S. K.; Kim, S. M.; Kim, T. H.; Kim, Y. I.; Kim, Y. J.; King, G. J.; Kinoshita, K.; Kirk, A.; Kirkby, D.; Kitayama, I.; Klemetti, M.; Klose, V.; Klucar, J.; Knecht, N. S.; Knoepfel, K. J.; Knowles, D. J.; Ko, B. R.; Kobayashi, N.; Kobayashi, S.; Kobayashi, T.; Kobel, M. J.; Koblitz, S.; Koch, H.; Kocian, M. L.; Kodyš, P.; Koeneke, K.; Kofler, R.; Koike, S.; Koishi, S.; Koiso, H.; Kolb, J. A.; Kolya, S. D.; Kondo, Y.; Konishi, H.; Koppenburg, P.; Koptchev, V. B.; Kordich, T. M. B.; Korol, A. A.; Korotushenko, K.; Korpar, S.; Kouzes, R. T.; Kovalskyi, D.; Kowalewski, R.; Kozakai, Y.; Kozanecki, W.; Kral, J. F.; Krasnykh, A.; Krause, R.; Kravchenko, E. A.; Krebs, J.; Kreisel, A.; Kreps, M.; Krishnamurthy, M.; Kroeger, R.; Kroeger, W.; Krokovny, P.; Kronenbitter, B.; Kroseberg, J.; Kubo, T.; Kuhr, T.; Kukartsev, G.; Kulasiri, R.; Kulikov, A.; Kumar, R.; Kumar, S.; Kumita, T.; Kuniya, T.; Kunze, M.; Kuo, C. C.; Kuo, T.-L.; Kurashiro, H.; Kurihara, E.; Kurita, N.; Kuroki, Y.; Kurup, A.; Kutter, P. E.; Kuznetsova, N.; Kvasnička, P.; Kyberd, P.; Kyeong, S. H.; Lacker, H. M.; Lae, C. K.; Lamanna, E.; Lamsa, J.; Lanceri, L.; Landi, L.; Lang, M. I.; Lange, D. J.; Lange, J. S.; Langenegger, U.; Langer, M.; Lankford, A. J.; Lanni, F.; Laplace, S.; Latour, E.; Lau, Y. P.; Lavin, D. R.; Layter, J.; Lebbolo, H.; LeClerc, C.; Leddig, T.; Leder, G.; Le Diberder, F.; Lee, C. L.; Lee, J.; Lee, J. S.; Lee, M. C.; Lee, M. H.; Lee, M. J.; Lee, S.-J.; Lee, S. E.; Lee, S. H.; Lee, Y. J.; Lees, J. P.; Legendre, M.; Leitgab, M.; Leitner, R.; Leonardi, E.; Leonidopoulos, C.; Lepeltier, V.; Leruste, Ph.; Lesiak, T.; Levi, M. E.; Levy, S. L.; Lewandowski, B.; Lewczuk, M. J.; Lewis, P.; Li, H.; Li, H. B.; Li, S.; Li, X.; Li, Y.; Gioi, L. Li; Libby, J.; Lidbury, J.; Lillard, V.; Lim, C. L.; Limosani, A.; Lin, C. S.; Lin, J. Y.; Lin, S. W.; Lin, Y. S.; Lindquist, B.; Lindsay, C.; Lista, L.; Liu, C.; Liu, F.; Liu, H.; Liu, H. M.; Liu, J.; Liu, R.; Liu, T.; Liu, Y.; Liu, Z. Q.; Liventsev, D.; Lo Vetere, M.; Locke, C. B.; Lockman, W. S.; Di Lodovico, F.; Lombardo, V.; London, G. W.; Lopes Pegna, D.; Lopez, L.; Lopez-March, N.; Lory, J.; LoSecco, J. M.; Lou, X. C.; Louvot, R.; Lu, A.; Lu, C.; Lu, M.; Lu, R. S.; Lueck, T.; Luitz, S.; Lukin, P.; Lund, P.; Luppi, E.; Lutz, A. M.; Lutz, O.; Lynch, G.; Lynch, H. L.; Lyon, A. J.; Lyubinsky, V. R.; MacFarlane, D. B.; Mackay, C.; MacNaughton, J.; Macri, M. M.; Madani, S.; Mader, W. F.; Majewski, S. A.; Majumder, G.; Makida, Y.; Malaescu, B.; Malaguti, R.; Malclés, J.; Mallik, U.; Maly, E.; Mamada, H.; Manabe, A.; Mancinelli, G.; Mandelkern, M.; Mandl, F.; Manfredi, P. F.; Mangeol, D. J. J.; Manoni, E.; Mao, Z. P.; Margoni, M.; Marker, C. E.; Markey, G.; Marks, J.; Marlow, D.; Marques, V.; Marsiske, H.; Martellotti, S.; Martin, E. C.; Martin, J. P.; Martin, L.; Martinez, A. J.; Marzolla, M.; Mass, A.; Masuzawa, M.; Mathieu, A.; Matricon, P.; Matsubara, T.; Matsuda, T.; Matsuda, T.; Matsumoto, H.; Matsumoto, S.; Matsumoto, T.; Matsuo, H.; Mattison, T. S.; Matvienko, D.; Matyja, A.; Mayer, B.; Mazur, M. A.; Mazzoni, M. A.; McCulloch, M.; McDonald, J.; McFall, J. D.; McGrath, P.; McKemey, A. K.; McKenna, J. A.; Mclachlin, S. E.; McMahon, S.; McMahon, T. R.; McOnie, S.; Medvedeva, T.; Melen, R.; Mellado, B.; Menges, W.; Menke, S.; Merchant, A. M.; Merkel, J.; Messner, R.; Metcalfe, S.; Metzler, S.; Meyer, N. T.; Meyer, T. I.; Meyer, W. T.; Michael, A. K.; Michelon, G.; Michizono, S.; Micout, P.; Miftakov, V.; Mihalyi, A.; Mikami, Y.; Milanes, D. A.; Milek, M.; Mimashi, T.; Minamora, J. S.; Mindas, C.; Minutoli, S.; Mir, L. M.; Mishra, K.; Mitaroff, W.; Miyake, H.; Miyashita, T. S.; Miyata, H.; Miyazaki, Y.; Moffitt, L. C.; Mohanty, G. B.; Mohapatra, A.; Mohapatra, A. K.; Mohapatra, D.; Moll, A.; Moloney, G. R.; Mols, J. P.; Mommsen, R. K.; Monge, M. R.; Monorchio, D.; Moore, T. B.; Moorhead, G. F.; Mora de Freitas, P.; Morandin, M.; Morgan, N.; Morgan, S. E.; Morganti, M.; Morganti, S.; Mori, S.; Mori, T.; Morii, M.; Morris, J. P.; Morsani, F.; Morton, G. W.; Moss, L. J.; Mouly, J. P.; Mount, R.; Mueller, J.; Müller-Pfefferkorn, R.; Mugge, M.; Muheim, F.; Muir, A.; Mullin, E.; Munerato, M.; Murakami, A.; Murakami, T.; Muramatsu, N.; Musico, P.; Nagai, I.; Nagamine, T.; Nagasaka, Y.; Nagashima, Y.; Nagayama, S.; Nagel, M.; Naisbit, M. T.; Nakadaira, T.; Nakahama, Y.; Nakajima, M.; Nakajima, T.; Nakamura, I.; Nakamura, T.; Nakamura, T. T.; Nakano, E.; Nakayama, H.; Nam, J. W.; Narita, S.; Narsky, I.; Nash, J. A.; Natkaniec, Z.; Nauenberg, U.; Nayak, M.; Neal, H.; Nedelkovska, E.; Negrini, M.; Neichi, K.; Nelson, D.; Nelson, S.; Neri, N.; Nesom, G.; Neubauer, S.; Newman-Coburn, D.; Ng, C.; Nguyen, X.; Nicholson, H.; Niebuhr, C.; Nief, J. Y.; Niiyama, M.; Nikolich, M. B.; Nisar, N. K.; Nishimura, K.; Nishio, Y.; Nitoh, O.; Nogowski, R.; Noguchi, S.; Nomura, T.; Nordby, M.; Nosochkov, Y.; Novokhatski, A.; Nozaki, S.; Nozaki, T.; Nugent, I. M.; O'Grady, C. P.; O'Neale, S. W.; O'Neill, F. G.; Oberhof, B.; Oddone, P. J.; Ofte, I.; Ogawa, A.; Ogawa, K.; Ogawa, S.; Ogawa, Y.; Ohkubo, R.; Ohmi, K.; Ohnishi, Y.; Ohno, F.; Ohshima, T.; Ohshima, Y.; Ohuchi, N.; Oide, K.; Oishi, N.; Okabe, T.; Okazaki, N.; Okazaki, T.; Okuno, S.; Olaiya, E. O.; Olivas, A.; Olley, P.; Olsen, J.; Ono, S.; Onorato, G.; Onuchin, A. P.; Onuki, Y.; Ooba, T.; Orimoto, T. J.; Oshima, T.; Osipenkov, I. L.; Ostrowicz, W.; Oswald, C.; Otto, S.; Oyang, J.; Oyanguren, A.; Ozaki, H.; Ozcan, V. E.; Paar, H. P.; Padoan, C.; Paick, K.; Palka, H.; Pan, B.; Pan, Y.; Panduro Vazquez, W.; Panetta, J.; Panova, A. I.; Panvini, R. S.; Panzenböck, E.; Paoloni, E.; Paolucci, P.; Pappagallo, M.; Paramesvaran, S.; Park, C. S.; Park, C. W.; Park, H.; Park, H. K.; Park, K. S.; Park, W.; Parry, R. J.; Parslow, N.; Passaggio, S.; Pastore, F. C.; Patel, P. M.; Patrignani, C.; Patteri, P.; Pavel, T.; Pavlovich, J.; Payne, D. J.; Peak, L. S.; Peimer, D. R.; Pelizaeus, M.; Pellegrini, R.; Pelliccioni, M.; Peng, C. C.; Peng, J. C.; Peng, K. C.; Peng, T.; Penichot, Y.; Pennazzi, S.; Pennington, M. R.; Penny, R. C.; Penzkofer, A.; Perazzo, A.; Perez, A.; Perl, M.; Pernicka, M.; Perroud, J.-P.; Peruzzi, I. M.; Pestotnik, R.; Peters, K.; Peters, M.; Petersen, B. A.; Petersen, T. C.; Petigura, E.; Petrak, S.; Petrella, A.; Petrič, M.; Petzold, A.; Pia, M. G.; Piatenko, T.; Piccolo, D.; Piccolo, M.; Piemontese, L.; Piemontese, M.; Pierini, M.; Pierson, S.; Pioppi, M.; Piredda, G.; Pivk, M.; Plaszczynski, S.; Polci, F.; Pompili, A.; Poropat, P.; Posocco, M.; Potter, C. T.; Potter, R. J. L.; Prasad, V.; Prebys, E.; Prencipe, E.; Prendki, J.; Prepost, R.; Prest, M.; Prim, M.; Pripstein, M.; Prudent, X.; Pruvot, S.; Puccio, E. M. T.; Purohit, M. V.; Qi, N. D.; Quinn, H.; Raaf, J.; Rabberman, R.; Raffaelli, F.; Ragghianti, G.; Rahatlou, S.; Rahimi, A. M.; Rahmat, R.; Rakitin, A. Y.; Randle-Conde, A.; Rankin, P.; Rashevskaya, I.; Ratkovsky, S.; Raven, G.; Re, V.; Reep, M.; Regensburger, J. J.; Reidy, J.; Reif, R.; Reisert, B.; Renard, C.; Renga, F.; Ricciardi, S.; Richman, J. D.; Ritchie, J. L.; Ritter, M.; Rivetta, C.; Rizzo, G.; Roat, C.; Robbe, P.; Roberts, D. A.; Robertson, A. I.; Robutti, E.; Rodier, S.; Rodriguez, D. M.; Rodriguez, J. L.; Rodriguez, R.; Roe, N. A.; Röhrken, M.; Roethel, W.; Rolquin, J.; Romanov, L.; Romosan, A.; Ronan, M. T.; Rong, G.; Ronga, F. J.; Roos, L.; Root, N.; Rosen, M.; Rosenberg, E. I.; Rossi, A.; Rostomyan, A.; Rotondo, M.; Roussot, E.; Roy, J.; Rozanska, M.; Rozen, Y.; Rozen, Y.; Rubin, A. E.; Ruddick, W. O.; Ruland, A. M.; Rybicki, K.; Ryd, A.; Ryu, S.; Ryuko, J.; Sabik, S.; Sacco, R.; Saeed, M. A.; Safai Tehrani, F.; Sagawa, H.; Sahoo, H.; Sahu, S.; Saigo, M.; Saito, T.; Saitoh, S.; Sakai, K.; Sakamoto, H.; Sakaue, H.; Saleem, M.; Salnikov, A. A.; Salvati, E.; Salvatore, F.; Samuel, A.; Sanders, D. A.; Sanders, P.; Sandilya, S.; Sandrelli, F.; Sands, W.; Sands, W. R.; Sanpei, M.; Santel, D.; Santelj, L.; Santoro, V.; Santroni, A.; Sanuki, T.; Sarangi, T. R.; Saremi, S.; Sarti, A.; Sasaki, T.; Sasao, N.; Satapathy, M.; Sato, Nobuhiko; Sato, Noriaki; Sato, Y.; Satoyama, N.; Satpathy, A.; Savinov, V.; Savvas, N.; Saxton, O. H.; Sayeed, K.; Schaffner, S. F.; Schalk, T.; Schenk, S.; Schieck, J. R.; Schietinger, T.; Schilling, C. J.; Schindler, R. H.; Schmid, S.; Schmitz, R. E.; Schmuecker, H.; Schneider, O.; Schnell, G.; Schönmeier, P.; Schofield, K. C.; Schott, G.; Schröder, H.; Schram, M.; Schubert, J.; Schümann, J.; Schultz, J.; Schumm, B. A.; Schune, M. H.; Schwanke, U.; Schwarz, H.; Schwiening, J.; Schwierz, R.; Schwitters, R. F.; Sciacca, C.; Sciolla, G.; Scott, I. J.; Seeman, J.; Seiden, A.; Seitz, R.; Seki, T.; Sekiya, A. I.; Semenov, S.; Semmler, D.; Sen, S.; Senyo, K.; Seon, O.; Serbo, V. V.; Serednyakov, S. I.; Serfass, B.; Serra, M.; Serrano, J.; Settai, Y.; Seuster, R.; Sevior, M. E.; Shakhova, K. V.; Shang, L.; Shapkin, M.; Sharma, V.; Shebalin, V.; Shelkov, V. G.; Shen, B. C.; Shen, D. Z.; Shen, Y. T.; Sherwood, D. J.; Shibata, T.; Shibata, T. A.; Shibuya, H.; Shidara, T.; Shimada, K.; Shimoyama, M.; Shinomiya, S.; Shiu, J. G.; Shorthouse, H. W.; Shpilinskaya, L. I.; Sibidanov, A.; Sicard, E.; Sidorov, A.; Sidorov, V.; Siegle, V.; Sigamani, M.; Simani, M. C.; Simard, M.; Simi, G.; Simon, F.; Simonetto, F.; Sinev, N. B.; Singh, H.; Singh, J. B.; Sinha, R.; Sitt, S.; Skovpen, Yu. I.; Sloane, R. J.; Smerkol, P.; Smith, A. J. S.; Smith, D.; Smith, D. S.; Smith, J. G.; Smol, A.; Snoek, H. L.; Snyder, A.; So, R. Y.; Sobie, R. J.; Soderstrom, E.; Soha, A.; Sohn, Y. S.; Sokoloff, M. D.; Sokolov, A.; Solagna, P.; Solovieva, E.; Soni, N.; Sonnek, P.; Sordini, V.; Spaan, B.; Spanier, S. M.; Spencer, E.; Speziali, V.; Spitznagel, M.; Spradlin, P.; Staengle, H.; Stamen, R.; Stanek, M.; Stanič, S.; Stark, J.; Steder, M.; Steininger, H.; Steinke, M.; Stelzer, J.; Stevanato, E.; Stocchi, A.; Stock, R.; Stoeck, H.; Stoker, D. P.; Stroili, R.; Strom, D.; Strother, P.; Strube, J.; Stugu, B.; Stypula, J.; Su, D.; Suda, R.; Sugahara, R.; Sugi, A.; Sugimura, T.; Sugiyama, A.; Suitoh, S.; Sullivan, M. K.; Sumihama, M.; Sumiyoshi, T.; Summers, D. J.; Sun, L.; Sun, S.; Sundermann, J. E.; Sung, H. F.; Susaki, Y.; Sutcliffe, P.; Suzuki, A.; Suzuki, J.; Suzuki, J. I.; Suzuki, K.; Suzuki, S.; Suzuki, S. Y.; Swain, J. E.; Swain, S. K.; T'Jampens, S.; Tabata, M.; Tackmann, K.; Tajima, H.; Tajima, O.; Takahashi, K.; Takahashi, S.; Takahashi, T.; Takasaki, F.; Takayama, T.; Takita, M.; Tamai, K.; Tamponi, U.; Tamura, N.; Tan, N.; Tan, P.; Tanabe, K.; Tanabe, T.; Tanaka, H. A.; Tanaka, J.; Tanaka, M.; Tanaka, S.; Tanaka, Y.; Tanida, K.; Taniguchi, N.; Taras, P.; Tasneem, N.; Tatishvili, G.; Tatomi, T.; Tawada, M.; Taylor, F.; Taylor, G. N.; Taylor, G. P.; Telnov, V. I.; Teodorescu, L.; Ter-Antonyan, R.; Teramoto, Y.; Teytelman, D.; Thérin, G.; Thiebaux, Ch.; Thiessen, D.; Thomas, E. W.; Thompson, J. M.; Thorne, F.; Tian, X. C.; Tibbetts, M.; Tikhomirov, I.; Tinslay, J. S.; Tiozzo, G.; Tisserand, V.; Tocut, V.; Toki, W. H.; Tomassini, E. W.; Tomoto, M.; Tomura, T.; Torassa, E.; Torrence, E.; Tosi, S.; Touramanis, C.; Toussaint, J. C.; Tovey, S. N.; Trapani, P. P.; Treadwell, E.; Triggiani, G.; Trincaz-Duvoid, S.; Trischuk, W.; Troost, D.; Trunov, A.; Tsai, K. L.; Tsai, Y. T.; Tsujita, Y.; Tsukada, K.; Tsukamoto, T.; Tuggle, J. M.; Tumanov, A.; Tung, Y. W.; Turnbull, L.; Turner, J.; Turri, M.; Uchida, K.; Uchida, M.; Uchida, Y.; Ueki, M.; Ueno, K.; Ujiie, N.; Ulmer, K. A.; Unno, Y.; Urquijo, P.; Ushiroda, Y.; Usov, Y.; Usseglio, M.; Usuki, Y.; Uwer, U.; Va'vra, J.; Vahsen, S. E.; Vaitsas, G.; Valassi, A.; Vallazza, E.; Vallereau, A.; Vanhoefer, P.; van Hoek, W. C.; Van Hulse, C.; van Winkle, D.; Varner, G.; Varnes, E. W.; Varvell, K. E.; Vasileiadis, G.; Velikzhanin, Y. S.; Verderi, M.; Versillé, S.; Vervink, K.; Viaud, B.; Vidal, P. B.; Villa, S.; Villanueva-Perez, P.; Vinograd, E. L.; Vitale, L.; Vitug, G. M.; Voß, C.; Voci, C.; Voena, C.; Volk, A.; von Wimmersperg-Toeller, J. H.; Vorobyev, V.; Vossen, A.; Vuagnin, G.; Vuosalo, C. O.; Wacker, K.; Wagner, A. P.; Wagner, D. L.; Wagner, G.; Wagner, M. N.; Wagner, S. R.; Wagoner, D. E.; Walker, D.; Walkowiak, W.; Wallom, D.; Wang, C. C.; Wang, C. H.; Wang, J.; Wang, J. G.; Wang, K.; Wang, L.; Wang, L. L.; Wang, P.; Wang, T. J.; Wang, W. F.; Wang, X. L.; Wang, Y. F.; Wappler, F. R.; Watanabe, M.; Watson, A. T.; Watson, J. E.; Watson, N. K.; Watt, M.; Weatherall, J. H.; Weaver, M.; Weber, T.; Wedd, R.; Wei, J. T.; Weidemann, A. W.; Weinstein, A. J. R.; Wenzel, W. A.; West, C. A.; West, C. G.; West, T. J.; White, E.; White, R. M.; Wicht, J.; Widhalm, L.; Wiechczynski, J.; Wienands, U.; Wilden, L.; Wilder, M.; Williams, D. C.; Williams, G.; Williams, J. C.; Williams, K. M.; Williams, M. I.; Willocq, S. Y.; Wilson, J. R.; Wilson, M. G.; Wilson, R. J.; Winklmeier, F.; Winstrom, L. O.; Winter, M. A.; Wisniewski, W. J.; Wittgen, M.; Wittlin, J.; Wittmer, W.; Wixted, R.; Woch, A.; Wogsland, B. J.; Won, E.; Wong, Q. K.; Wray, B. C.; Wren, A. C.; Wright, D. M.; Wu, C. H.; Wu, J.; Wu, S. L.; Wulsin, H. W.; Xella, S. M.; Xie, Q. L.; Xie, Y.; Xu, Z. Z.; Yéche, Ch.; Yamada, Y.; Yamaga, M.; Yamaguchi, A.; Yamaguchi, H.; Yamaki, T.; Yamamoto, H.; Yamamoto, N.; Yamamoto, R. K.; Yamamoto, S.; Yamanaka, T.; Yamaoka, H.; Yamaoka, J.; Yamaoka, Y.; Yamashita, Y.; Yamauchi, M.; Yan, D. S.; Yan, Y.; Yanai, H.; Yanaka, S.; Yang, H.; Yang, R.; Yang, S.; Yarritu, A. K.; Yashchenko, S.; Yashima, J.; Yasin, Z.; Yasu, Y.; Ye, S. W.; Yeh, P.; Yi, J. I.; Yi, K.; Yi, M.; Yin, Z. W.; Ying, J.; Yocky, G.; Yokoyama, K.; Yokoyama, M.; Yokoyama, T.; Yoshida, K.; Yoshida, M.; Yoshimura, Y.; Young, C. C.; Yu, C. X.; Yu, Z.; Yuan, C. Z.; Yuan, Y.; Yumiceva, F. X.; Yusa, Y.; Yushkov, A. N.; Yuta, H.; Zacek, V.; Zain, S. B.; Zallo, A.; Zambito, S.; Zander, D.; Zang, S. L.; Zanin, D.; Zaslavsky, B. G.; Zeng, Q. L.; Zghiche, A.; Zhang, B.; Zhang, J.; Zhang, J.; Zhang, L.; Zhang, L. M.; Zhang, S. Q.; Zhang, Z. P.; Zhao, H. W.; Zhao, M.; Zhao, Z. G.; Zheng, Y.; Zheng, Y. H.; Zheng, Z. P.; Zhilich, V.; Zhou, P.; Zhu, R. Y.; Zhu, Y. S.; Zhu, Z. M.; Zhulanov, V.; Ziegler, T.; Ziegler, V.; Zioulas, G.; Zisman, M.; Zito, M.; Zürcher, D.; Zwahlen, N.; Zyukova, O.; Živko, T.; Žontar, D.

2014-11-01

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.

A Classroom of Polymer Factories.

ERIC Educational Resources Information Center

Harris, Mary E.; Van Natta, Sandra

1998-01-01

Provides an activity in which students create small classroom factories and investigate several aspects of production including design, engineering, quality control, waste management, packaging, shipment, and communication. (DDR)

An examination of effect estimation in factorial and standardly-tailored designs

PubMed Central

Allore, Heather G; Murphy, Terrence E

2012-01-01

Background Many clinical trials are designed to test an intervention arm against a control arm wherein all subjects are equally eligible for all interventional components. Factorial designs have extended this to test multiple intervention components and their interactions. A newer design referred to as a ‘standardly-tailored’ design, is a multicomponent interventional trial that applies individual interventional components to modify risk factors identified a priori and tests whether health outcomes differ between treatment arms. Standardly-tailored designs do not require that all subjects be eligible for every interventional component. Although standardly-tailored designs yield an estimate for the net effect of the multicomponent intervention, it has not yet been shown if they permit separate, unbiased estimation of individual component effects. The ability to estimate the most potent interventional components has direct bearing on conducting second stage translational research. Purpose We present statistical issues related to the estimation of individual component effects in trials of geriatric conditions using factorial and standardly-tailored designs. The medical community is interested in second stage translational research involving the transfer of results from a randomized clinical trial to a community setting. Before such research is undertaken, main effects and synergistic and or antagonistic interactions between them should be identified. Knowledge of the relative strength and direction of the effects of the individual components and their interactions facilitates the successful transfer of clinically significant findings and may potentially reduce the number of interventional components needed. Therefore the current inability of the standardly-tailored design to provide unbiased estimates of individual interventional components is a serious limitation in their applicability to second stage translational research. Methods We discuss estimation of individual component effects from the family of factorial designs and this limitation for standardly-tailored designs. We use the phrase ‘factorial designs’ to describe full-factorial designs and their derivatives including the fractional factorial, partial factorial, incomplete factorial and modified reciprocal designs. We suggest two potential directions for designing multicomponent interventions to facilitate unbiased estimates of individual interventional components. Results Full factorial designs and their variants are the most common multicomponent trial design described in the literature and differ meaningfully from standardly-tailored designs. Factorial and standardly-tailored designs result in similar estimates of net effect with different levels of precision. Unbiased estimation of individual component effects from a standardly-tailored design will require new methodology. Limitations Although clinically relevant in geriatrics, previous applications of standardly-tailored designs have not provided unbiased estimates of the effects of individual interventional components. Discussion Future directions to estimate individual component effects from standardly-tailored designs include applying D-optimal designs and creating independent linear combinations of risk factors analogous to factor analysis. Conclusion Methods are needed to extract unbiased estimates of the effects of individual interventional components from standardly-tailored designs. PMID:18375650

Laser acceleration of electrons to giga-electron-volt energies using highly charged ions.

PubMed

Hu, S X; Starace, Anthony F

2006-06-01

The recent proposal to use highly charged ions as sources of electrons for laser acceleration [S. X. Hu and A. F. Starace, Phys. Rev. Lett. 88, 245003 (2002)] is investigated here in detail by means of three-dimensional, relativistic Monte Carlo simulations for a variety of system parameters, such as laser pulse duration, ionic charge state, and laser focusing spot size. Realistic laser focusing effects--e.g., the existence of longitudinal laser field components-are taken into account. Results of spatial averaging over the laser focus are also presented. These numerical simulations show that the proposed scheme for laser acceleration of electrons from highly charged ions is feasible with current or near-future experimental conditions and that electrons with GeV energies can be obtained in such experiments.

Relationship between blood lead level and work related factors using the NIIH questionnaire system.

PubMed

Saito, Hiroyuki; Mori, Ippei; Ogawa, Yasutaka; Hirata, Mamoru

2006-10-01

Over an 11-yr period (1990-2000), a questionnaire survey on work environmental management and environmental improvement was conducted on 259 lead-handling factories and 7,623 subjects. Labour Inspection Offices identified these factories as requiring environmental improvement, or possessing a desire to improve their working environment. We analyzed factors affecting blood lead levels (PbBs). These factors were gender, age, employment duration, factory size, work environment control (WEC) class, and job categories. The PbB of men was found to be higher than that of women, and may be due to the differences in job distribution. PbB increased along with increasing age and employment duration. PbB declined as the factory size increased. The odds ratio (OR) of PbB higher than 20 microg/dl according to factory size was significantly high even after adjusting for WEC class. This demonstrates that not only the working environment but also safety management was poorer among small-scale factories that large-scale factories. The rise of PbB along with the increase of WEC class confirmed that the results of work environment measurement are correlated with individual exposure levels. The risk of having a 20 microg/dl or higher PbB was different for various lead handling jobs. Smelting or refining lead had the highest risk for lead exposure while painting or baking had the lowest risk. As our study population was not a randomly selected sample, we are unable to generalize our results for workers across Japan. However, we were able to indicate which jobs pose a high-risk and the effectiveness of using the work environment control class as an index of worksite environment levels.

From Genes to Environment: Using integrative genomics to build a “systems level” understanding of autism spectrum disorders

PubMed Central

Hu, Valerie W.

2012-01-01

Autism spectrum disorders (ASD) are pervasive neurodevelopmental disorders that affect an estimated 1 in 110 individuals. Although there is a strong genetic component associated with these disorders, this review focuses on the multi-factorial nature of ASD and how different genome-wide (genomic) approaches contribute to our understanding of autism. Emphasis is placed on the need to study defined ASD phenotypes as well as to integrate large-scale ‘omics’ data in order to develop a “systems level” perspective of ASD which, in turn, is necessary to allow predictions regarding responses to specific perturbations and interventions. PMID:22497667

Determination of tailored filter sets to create rayfiles including spatial and angular resolved spectral information.

PubMed

Rotscholl, Ingo; Trampert, Klaus; Krüger, Udo; Perner, Martin; Schmidt, Franz; Neumann, Cornelius

2015-11-16

To simulate and optimize optical designs regarding perceived color and homogeneity in commercial ray tracing software, realistic light source models are needed. Spectral rayfiles provide angular and spatial varying spectral information. We propose a spectral reconstruction method with a minimum of time consuming goniophotometric near field measurements with optical filters for the purpose of creating spectral rayfiles. Our discussion focuses on the selection of the ideal optical filter combination for any arbitrary spectrum out of a given filter set by considering measurement uncertainties with Monte Carlo simulations. We minimize the simulation time by a preselection of all filter combinations, which bases on factorial design.

Multiple job holding in rural villages and the Chinese road to development.

PubMed

van der Ploeg, Jan Douwe; Jingzhong, Ye

2010-01-01

This paper examines some of the interrelations that exist between rural China's peasant economy and the wider economy in which it is embedded. In doing so it focuses on the circular flows that link town and countryside. Multiple job holding is strategic in this respect. The paper draws on research undertaken in a peasant village in Hebei Province. The research highlights some remarkable differences that exist between development processes in China and in other developing countries and traces these back to a combination of an enlightened rural policy and the strong linkages that exist between rural China and its urban "global factory".

Transcriptome Analysis of Plant Hormone-Related Tomato (Solanum lycopersicum) Genes in a Sunlight-Type Plant Factory.

PubMed

Tanigaki, Yusuke; Higashi, Takanobu; Takayama, Kotaro; Nagano, Atsushi J; Honjo, Mie N; Fukuda, Hirokazu

2015-01-01

In plant factories, measurements of plant conditions are necessary at an early stage of growth to predict harvest times of high value-added crops. Moreover, harvest qualities depend largely on environmental stresses that elicit plant hormone responses. However, the complexities of plant hormone networks have not been characterized under nonstress conditions. In the present study, we determined temporal expression profiles of all genes and then focused on plant hormone pathways using RNA-Seq analyses of gene expression in tomato leaves every 2 h for 48 h. In these experiments, temporally expressed genes were found in the hormone synthesis pathways for salicylic acid, abscisic acid, ethylene, and jasmonic acid. The timing of CAB expression 1 (TOC1) and abscisic acid insensitive 1 (ABA1) and open stomata 1 (OST1) control gating stomata. In this study, compare with tomato and Arabidopsis thaliana, expression patterns of TOC1 have similarity. In contrast, expression patterns of tomato ABI1 and OST1 had expression peak at different time. These findings suggest that the regulation of gating stomata does not depend predominantly on TOC1 and significantly reflects the extracellular environment. The present data provide new insights into relationships between temporally expressed plant hormone-related genes and clock genes under normal sunlight conditions.

Transcriptome Analysis of Plant Hormone-Related Tomato (Solanum lycopersicum) Genes in a Sunlight-Type Plant Factory

PubMed Central

Tanigaki, Yusuke; Higashi, Takanobu; Takayama, Kotaro; Nagano, Atsushi J.; Honjo, Mie N.; Fukuda, Hirokazu

2015-01-01

In plant factories, measurements of plant conditions are necessary at an early stage of growth to predict harvest times of high value-added crops. Moreover, harvest qualities depend largely on environmental stresses that elicit plant hormone responses. However, the complexities of plant hormone networks have not been characterized under nonstress conditions. In the present study, we determined temporal expression profiles of all genes and then focused on plant hormone pathways using RNA-Seq analyses of gene expression in tomato leaves every 2 h for 48 h. In these experiments, temporally expressed genes were found in the hormone synthesis pathways for salicylic acid, abscisic acid, ethylene, and jasmonic acid. The timing of CAB expression 1 (TOC1) and abscisic acid insensitive 1 (ABA1) and open stomata 1 (OST1) control gating stomata. In this study, compare with tomato and Arabidopsis thaliana, expression patterns of TOC1 have similarity. In contrast, expression patterns of tomato ABI1 and OST1 had expression peak at different time. These findings suggest that the regulation of gating stomata does not depend predominantly on TOC1 and significantly reflects the extracellular environment. The present data provide new insights into relationships between temporally expressed plant hormone-related genes and clock genes under normal sunlight conditions. PMID:26624004

Identification of water quality management policy of watershed system with multiple uncertain interactions using a multi-level-factorial risk-inference-based possibilistic-probabilistic programming approach.

PubMed

Liu, Jing; Li, Yongping; Huang, Guohe; Fu, Haiyan; Zhang, Junlong; Cheng, Guanhui

2017-06-01

In this study, a multi-level-factorial risk-inference-based possibilistic-probabilistic programming (MRPP) method is proposed for supporting water quality management under multiple uncertainties. The MRPP method can handle uncertainties expressed as fuzzy-random-boundary intervals, probability distributions, and interval numbers, and analyze the effects of uncertainties as well as their interactions on modeling outputs. It is applied to plan water quality management in the Xiangxihe watershed. Results reveal that a lower probability of satisfying the objective function (θ) as well as a higher probability of violating environmental constraints (q i ) would correspond to a higher system benefit with an increased risk of violating system feasibility. Chemical plants are the major contributors to biological oxygen demand (BOD) and total phosphorus (TP) discharges; total nitrogen (TN) would be mainly discharged by crop farming. It is also discovered that optimistic decision makers should pay more attention to the interactions between chemical plant and water supply, while decision makers who possess a risk-averse attitude would focus on the interactive effect of q i and benefit of water supply. The findings can help enhance the model's applicability and identify a suitable water quality management policy for environmental sustainability according to the practical situations.

Impact of a workplace intervention on attitudes and practices related to gender equity in Bengaluru, India.

PubMed

Krishnan, Suneeta; Gambhir, Shalini; Luecke, Ellen; Jagannathan, Latha

2016-10-01

We describe the evaluation of a participatory, garment factory-based intervention to promote gender equity. The intervention comprised four campaigns focused on gender and violence against women, alcoholism, sexual and reproductive health, and HIV/AIDS, which were implemented using information displays (standees and posters) and interactive methods (street play, one-to-one interactions, experience-sharing, and health camps). Each campaign lasted six days and the entire intervention was implemented over 10 months. We evaluated the intervention using a quasi-experimental design in which one factory served as the intervention site and a second as a delayed control. Two mobile-phone-based cross-sectional surveys were conducted at baseline and 12 months with separate systematic random samples of employees from each site. Data on socio-demographic characteristics and knowledge and attitudes related to gender equity, intimate partner violence (IPV) and alcohol use were assessed, and differences in these variables associated with the intervention were examined using difference-in-difference estimation. Analyses of data from 835 respondents revealed substantial, statistically significant improvements in attitudes related to gender equity, unacceptability of IPV, and awareness of IPV and alcohol-related support services. In conclusion, our study offers compelling evidence on the effectiveness of workplace-based interventions in advancing gender equity.

A Randomized Longitudinal Factorial Design to Assess Malaria Vector Control and Disease Management Interventions in Rural Tanzania

PubMed Central

Kramer, Randall A.; Mboera, Leonard E. G.; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H.; Paul, Christopher J.; Miranda, Marie Lynn

2014-01-01

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials. PMID:24840349

A randomized longitudinal factorial design to assess malaria vector control and disease management interventions in rural Tanzania.

PubMed

Kramer, Randall A; Mboera, Leonard E G; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H; Paul, Christopher J; Miranda, Marie Lynn

2014-05-16

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials.

Engineering propionibacteria as versatile cell factories for the production of industrially important chemicals: advances, challenges, and prospects.

PubMed

Guan, Ningzi; Zhuge, Xin; Li, Jianghua; Shin, Hyun-Dong; Wu, Jing; Shi, Zhongping; Liu, Long

2015-01-01

Propionibacteria are actinobacteria consisting of two principal groups: cutaneous and dairy. Cutaneous propionibacteria are considered primary pathogens to humans, whereas dairy propionibacteria are widely used in the food and pharmaceutical industries. Increasing attention has been focused on improving the performance of dairy propionibacteria for the production of industrially important chemicals, and significant advances have been made through strain engineering and process optimization in the production of flavor compounds, nutraceuticals, and antimicrobial compounds. In addition, genome sequencing of several propionibacteria species has been completed, deepening understanding of the metabolic and physiological features of these organisms. However, the metabolic engineering of propionibacteria still faces several challenges owing to the lack of efficient genome manipulation tools and the existence of various types of strong restriction-modification systems. The emergence of systems and synthetic biology provides new opportunities to overcome these bottlenecks. In this review, we first introduce the major species of propionibacteria and their properties and provide an overview of their functions and applications. We then discuss advances in the genome sequencing and metabolic engineering of these bacteria. Finally, we discuss systems and synthetic biology approaches for engineering propionibacteria as efficient and robust cell factories for the production of industrially important chemicals.

Facilitators and barriers to healthy eating in a worksite cafeteria: a qualitative study from Nepal

PubMed Central

Shrestha, Archana; Pyakurel, Prajjwal; Shrestha, Abha; Gautam, Rabin; Manandhar, Nisha; Rhodes, Elizabeth; Tamrakar, Dipesh; Karmacharya, Biraj Man; Malik, Vasanti; Mattei, Josiemer; Spiegelman, Donna

2017-01-01

Objective Worksite interventions can serve as a potential platform for translating existing knowledge of diabetes prevention and facilitate healthy food choices. The study explored perceptions about healthy eating as well as potential facilitators and barriers to healthy eating among employees in a wire manufacturing factory in Nepal. Methods and materials We conducted a cross-sectional exploratory qualitative study in a wire manufacturing industry in eastern Nepal. We conducted three focus group discussions (FGDs) with a total of 26 employees and four in-depth interviews (IDIs) with cafeteria operators/managers from a wire manufacturing factory in eastern Nepal. FGDs and IDIs were audio-recorded, transcribed verbatim and analysed using the thematic method. Results Most employees defined healthy eating as the consumption of food prepared and maintained using hygienic practices and fresh foods in general. Major barriers to healthy eating included unavailability of healthy foods, difficulty in changing eating habits, the preference for fried foods in Nepali culture and the high costs of some healthy foods. The most commonly reported facilitator of healthy eating was the availability of affordable healthy food options in worksite cafeterias. Conclusion Availability of healthy food options at an affordable price could lead to healthier food choices in the worksite. PMID:29225703

Transferring experience labs for production engineering students to universities in newly industrialized countries

NASA Astrophysics Data System (ADS)

Leiden, A.; Posselt, G.; Bhakar, V.; Singh, R.; Sangwan, K. S.; Herrmann, C.

2018-01-01

The Indian economy is one of the fastest growing economies in the world and the demand for the skilled engineers is increasing. Subsequently the Indian education sector is growing to provide the necessary number of skilled engineers. Current Indian engineering graduates have broad theoretical background but lack in methodological, soft and practical skills. To bridge this gap, the experience lab ideas from the engineering education at “Die Lernfabrik” (learning factory) of the Technische Universität Braunschweig (TU Braunschweig) is transferred to the Birla Institute of Technology and Science in Pilani (BITS Pilani), India. This Lernfabrik successfully strengthened the methodological, soft and practical skills of the TU Braunschweig production-engineering graduates. The target group is discrete manufacturing education with focusing on energy and resource efficiency as well as cyber physical production systems. As the requirements of industry and academia in India differs from Germany, the transfer of the experience lab to the Indian education system needs special attention to realize a successful transfer project. This publication provides a unique approach to systematically transfer the educational concept in Learning Factory from a specific university environment to a different environment in a newly industrialized country. The help of a bilateral university driven practice partnership between the two universities creates a lighthouse for the Indian university environment.

The SuperNova Integral Field Spectrograph

NASA Astrophysics Data System (ADS)

Aldering, Gregory S.; Supernova Factory, Nearby

2007-05-01

The SuperNova Integral Field Spectrograph (SNIFS) is operated at the University of Hawaii 2.2 meter telescope on Mauna Kea by the Nearby Supernova Factory. The IFU has a 6x6 arcsecond field of view, and the combined blue and red channels simultaneously cover the full optical (320-1000 nm) spectral range. SNIFS was designed to allow spectrophotometry of supernovae under both photometric and non-photometric conditions. SNIFS is operated entirely remotely, in a quasi-automated mode, from as nearby as Hilo, Hawaii and as far away as Paris, France. Being mounted at the south bent Cassegrain focus of the UH 2.2-m, SNIFS is always available, either for regular Nearby Supernova Factory observations, or any of a range of programs conducted by astronomers at the University of Hawaii Institute for Astronomy. We illustrate some of the unique features of SNIFS and some of the science programs that have been undertaken using it. This work is supported in part by the Director, Office of Science, Office of High Energy and Nuclear Physics, of the U.S. Department of Energy under Contracts No. DE-FG0-92ER40704, by a grant from the Gordon & Betty Moore Foundation, and in France by CNRS/IN2P3, CNRS/INSU and PNC.

Quantitative metabolomics of the thermophilic methylotroph Bacillus methanolicus.

PubMed

Carnicer, Marc; Vieira, Gilles; Brautaset, Trygve; Portais, Jean-Charles; Heux, Stephanie

2016-06-01

The gram-positive bacterium Bacillus methanolicus MGA3 is a promising candidate for methanol-based biotechnologies. Accurate determination of intracellular metabolites is crucial for engineering this bacteria into an efficient microbial cell factory. Due to the diversity of chemical and cell properties, an experimental protocol validated on B. methanolicus is needed. Here a systematic evaluation of different techniques for establishing a reliable basis for metabolome investigations is presented. Metabolome analysis was focused on metabolites closely linked with B. methanolicus central methanol metabolism. As an alternative to cold solvent based procedures, a solvent-free quenching strategy using stainless steel beads cooled to -20 °C was assessed. The precision, the consistency of the measurements, and the extent of metabolite leakage from quenched cells were evaluated in procedures with and without cell separation. The most accurate and reliable performance was provided by the method without cell separation, as significant metabolite leakage occurred in the procedures based on fast filtration. As a biological test case, the best protocol was used to assess the metabolome of B. methanolicus grown in chemostat on methanol at two different growth rates and its validity was demonstrated. The presented protocol is a first and helpful step towards developing reliable metabolomics data for thermophilic methylotroph B. methanolicus. This will definitely help for designing an efficient methylotrophic cell factory.

Beamline front end for in-vacuum short period undulator at the photon factory storage ring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyauchi, Hiroshi, E-mail: hiroshi.miyauchi@kek.jp; Department of Accelerator Science, School of High Energy Accelerator Science, SOKENDAI; Tahara, Toshihiro, E-mail: ttahara@post.kek.jp

The straight-section upgrade project of the Photon Factory created four new short straight sections capable of housing in-vacuum short period undulators. The first to fourth short period undulators SGU#17, SGU#03, SGU#01 and SGU#15 were installed at the 2.5-GeV Photon Factory storage ring in 2005, 2006, 2009 and 2013, respectively. The beamline front end for SGU#15 is described in this paper.

Plant Factory

NASA Astrophysics Data System (ADS)

Ikeda, Hideo

Recently, much attention is paid on the plant factory, as it enable to grow plants stably under extraordinary climate condition such as high and/or low air temperature and less rain. Lots of questions such as decreasing investing cost, realizing stable plant production and developing new growing technique should be solved for making popular this growing system. However, I think that we can introduce a highly developed Japanese industrial now-how to plant factory system and can produce a business chance to the world market.

Cyber and physical equipment digital control system in Industry 4.0 item designing company

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-05-01

The problem of organization of digital control of the item designing company equipped with cyber and physical systems is being studied. A scheme of cyber and physical systems and personnel interaction in the Industry 4.0 smart factory company is presented. A scheme of assembly units transportation in the Industry 4.0 smart factory company is provided. A scheme of digital control system in the Industry 4.0 smart factory company is given.

Occupational asthma in an electronics factory: a case control study to evaluate aetiological factors

PubMed Central

Burge, P Sherwood; Perks, W H; O'Brien, I M; Burge, A; Hawkins, R; Brown, D; Green, M

1979-01-01

This is the final part of a study carried out to investigate occupational asthma due to sensitivity to colophony fumes (a component of soldering flux) in an electronics factory. Fifty-eight workers with occupational asthma employed on the main shop floor were investigated. In them the interval between first exposure and sensitisation varied widely with a group becoming sensitive within one to two years of first exposure, and another group whose sensitisation was delayed for three to 23 years. Once sensitised the interval between arriving at work and the onset of daily symptoms seemed to be bimodally distributed, resembling the immediate and late asthmatic symptoms seen on provocation testing. Twenty-three out of 58 had no definite daily deterioration at work but improved at the weekends. Wheeze and breathlessness occurred in the evenings at home in most, and one-third were woken by breathlessness at least on some nights. These 58 cases were compared with 48 controls without occupational asthma who had worked on the same shop floor for at least four years. Mean levels of FEV1 were significantly worse in the cases before exposure on Monday morning. The cases also had more than twice as much sickness absence as controls. FEV1 fell by more than 10% over a working shift in 33% of cases and 5% of controls. Atopy (a positive skin prick test to one or more common allergens) and a past history of allergic disease were weakly but significantly associated with being a case. The effects of smoking and a family history of allergic disease were trivial. Prick testing with an antigen derived from the colophony in the solder flux was completely negative, but cases and controls had significantly raised levels of total IgM compared with blood bank controls, perhaps suggesting some previously unrecognised immunological process. PMID:483204

SU-F-T-487: On-Site Beam Matching of An Elekta Infinity with Agility MLC with An Elekta Versa HD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, C; Garcia, M; Mason, B

2016-06-15

Purpose: Historically, beam matching of similar Linear Accelerators has been accomplished by sending beam data to the manufacturer to match at their factory. The purpose of this work is to demonstrate that fine beam matching can be carried out on-site as part of the acceptance test, with similar or better results. Methods: Initial scans of a 10 × 10 Percent depth dose (PDD) and a 40 × 40 beam profile at the depth of Dmax, for 6MV and 10 MV were taken to compare with the standard beam data from the Versa. The energy was then adjusted and the beammore » steered to achieve agreement between the depth dose and the horns of the beam profile. This process was repeated until the best agreement between PDD and profiles was achieved. Upon completion, all other clinical data were measured to verify match. This included PDD, beam profiles, output factors and Wedge factors. For electron beams PDD’s were matched and the beam profiles verified for the final beam energy. Confirmatory PDD and beam profiles for clinical field sizes, as well as Output Factors were measured. Results: The average difference in PDD’s for 6MV and 10MV were within 0.4% for both wedged and open fields. Beam profile comparisons over the central 80% of the field, at multiple depths, show agreement of 0.8% or less for both wedged and open fields. Average output factor agreement over all field sizes was 0.4% for 6MV and 0.2 % for 10MV. Wedge factors agreement was less than 0.6% for both photon energies over all field sizes. Electron PDD agreed to 0.5mm. Cone ratios agreed to 1% or less. Conclusion: This work indicates that beam matching can be carried out on-site simply and quickly. The results of this beam matching can achieve similar or better results than factory matching.« less

Factorial validity of the Movement Assessment Battery for Children-2 (age band 2).

PubMed

Wagner, Matthias Oliver; Kastner, Julia; Petermann, Franz; Bös, Klaus

2011-01-01

The Movement Assessment Battery for Children-2 (M-ABC-2) is one of the most commonly used tests for the diagnosis of specific developmental disorders of motor function (F82). The M-ABC-2 comprises eight subtests per age band (AB) that are assigned to three dimensions: manual dexterity, aiming and catching, and balance. However, while previous exploratory findings suggested the correctness of the assumption of factorial validity, there is no empirical evidence that the M-ABC-2 subtests allow for a valid reproduction of the postulated factorial structure. The purpose of this study was to empirically confirm the factorial validity of the M-ABC-2. The German normative sample of AB2 (7-10 years; N=323) was used as the study sample for the empirical analyses. Confirmatory factor analysis was used to verify the factorial validity of the M-ABC-2 (AB2). The incremental fit indices (χ2=28.675; df=17; Bollen-Stine p value=0.318; RMSEA=0.046 [0.011-0.075]; SRMR=0.038; CFI=0.960) provided evidence for the factorial validity of the M-ABC-2 (AB2). However, because of a lack of empirical verification for convergent and discriminant validity, there is still no evidence that F82 can be diagnosed using M-ABC-2 (AB2). Copyright © 2010 Elsevier Ltd. All rights reserved.

Subsurface examination of a foliar biofilm using scanning electron- and focused-ion-beam microscopy

USDA-ARS?s Scientific Manuscript database

The dual beam scanning electron microscope, equipped with both a focused ion- and scanning electron- beam (FIB SEM) is a novel tool for the exploration of the subsurface structure of biological tissues. The FIB is capable of removing small cross sections to view the subsurface features and may be s...

A quality by design approach to optimization of emulsions for electrospinning using factorial and D-optimal designs.

PubMed

Badawi, Mariam A; El-Khordagui, Labiba K

2014-07-16

Emulsion electrospinning is a multifactorial process used to generate nanofibers loaded with hydrophilic drugs or macromolecules for diverse biomedical applications. Emulsion electrospinnability is greatly impacted by the emulsion pharmaceutical attributes. The aim of this study was to apply a quality by design (QbD) approach based on design of experiments as a risk-based proactive approach to achieve predictable critical quality attributes (CQAs) in w/o emulsions for electrospinning. Polycaprolactone (PCL)-thickened w/o emulsions containing doxycycline HCl were formulated using a Span 60/sodium lauryl sulfate (SLS) emulsifier blend. The identified emulsion CQAs (stability, viscosity and conductivity) were linked with electrospinnability using a 3(3) factorial design to optimize emulsion composition for phase stability and a D-optimal design to optimize stable emulsions for viscosity and conductivity after shifting the design space. The three independent variables, emulsifier blend composition, organic:aqueous phase ratio and polymer concentration, had a significant effect (p<0.05) on emulsion CQAs, the emulsifier blend composition exerting prominent main and interaction effects. Scanning electron microscopy (SEM) of emulsion-electrospun NFs and desirability functions allowed modeling of emulsion CQAs to predict electrospinnable formulations. A QbD approach successfully built quality in electrospinnable emulsions, allowing development of hydrophilic drug-loaded nanofibers with desired morphological characteristics. Copyright © 2014 Elsevier B.V. All rights reserved.

Physicochemistry, morphology and leachability of selected metals from post-galvanized sewage sludge from screw factory in Łańcut, SE Poland

NASA Astrophysics Data System (ADS)

Galas, Dagmara; Kalembkiewicz, Jan; Sitarz-Palczak, Elżbieta

2016-12-01

Morphology, physicochemical properties, chemical composition of post-galvanized sewage sludge from Screw Factory in Łańcut, leachability and mobility of metals has been analyzed. The analyses with the use of scanning electron microscope with an adapter to perform chemical analysis of microsites (EDS) showed that the material is characterized by a high fragmentation and a predominant number of irregularly shaped grains. The sewage sludge is alkaline with a large loss of ignition (34.6%) and small bulk density (< 1 g/cm3). The EDS analyses evidenced presence of oxygen, silicon, calcium, chromium, iron and zinc in all examined areas, and presence of manganese and copper in selected areas indicating a non-uniform distribution of metals in the sewage sludge. Within one-stage mineralization and FAAS technique a predominant share of calcium, zinc and iron in terms of dry matter was recorded in the sewage sludge. The contents of Co, Cr, Cu, K, Mn, Ni and Pb in sewage sludge are below 1%. Evaluation of mobility and leaching of metals in sewage sludge was carried out by means of two parameters: accumulation coefficient of mobile fractions and leaching level related to the mass solubility of sewage sludge. The results indicate that the short-term or long-term storage of not inactivated post-galvanized sewage sludge can result in release of metals.

Brain-targeted intranasal zaleplon solid dispersion in hydrophilic carrier system; 23 full-factorial design and in vivo determination of GABA neurotransmitter.

PubMed

Abd-Elrasheed, Eman; Nageeb El-Helaly, Sara; El-Ashmoony, Manal M; Salah, Salwa

2018-05-01

Intranasal zaleplon solid dispersion was formulated to enhance the solubility, bioavailability and deliver an effective therapy. Zaleplon belongs to Class II drugs, and undergoes extensive first-pass metabolism after oral absorption exhibiting 30% bioavailability. A 2 3 full-factorial design was chosen for the investigation of solid dispersion formulations. The effects of different variables include drug to carrier ratio (1:1 and 1:2), carrier type (polyethylene glycol 4000 and poloxamer 407), and preparation method (solvent evaporation and freeze drying) on different dissolution parameters were studied. The dependent variables determined from the in vitro characterization and their constraints were set as follows: minimum mean dissolution time, maximum dissolution efficiency and maximum percentage release. Numerical optimization was performed according to the constraints set based on the utilization of desirability functions. Differential scanning calorimetry, infrared spectroscopy, X-ray diffraction and scanning electron microscopy were performed. Ex vivo estimation of nasal cytotoxicity and assessment of the γ-aminobutyric acid level in plasma and brain 1 h after nasal SD administration in rabbits compared to the oral market product were conducted. The selected ZP-SD, with a desirability 0.9, composed of poloxamer 407 at drug to carrier ratio 1:2 successfully enhanced the bioavailability showing 44% increase in GABA concentration than the marketed tablets.

[Prevalence and influence factors of hypertension among mechanic factory workers].

PubMed

Pang, Li-Juan; Chen, Li-Zhang; Fu, Ben-Yan

2005-06-01

To determine the status and influence factors of hypertension on mechanic factory workers and to provide reference for further hypertension prevention and control. A cross-sectional study on 1205 workers (exposed to different noise levels) in Hunan was carried out by using questionaire and measuring the blood pressure of the workers and the noise exposure level in the workplace. The prevalence and the influence factors of hypertension among mechanic factory workers were analysed. The hypertension prevalence was 12.1%. Logistic regression analysis showed the body weight index (BMI), age, and history of hypertension in parents and accumulative noise dose levels influenced the hypertension prevalence. Controlling the body weight, reducing alcohol consumption, decreasing the sound pressure level in workshops and advocating healthy diet may reduce the prevalence rate of hypertension among mechanic factory workers.

Cleaner production in the ammonia-soda industry: an ecological and economic study.

PubMed

Kasikowski, T; Buczkowski, R; Lemanowska, E

2004-12-01

Five methods to reduce the negative influence of soda ash factories on the natural environment are presented: 1. obtaining calcium-magnesium phosphates by treating the suspension from raw brine purification with orthophosphoric acid (H(3)PO(4)), 2. production of precipitated chalk from soda processing waste, 3. production of gypsum and semi-brine, 4. desulphurisation of fume gases from the factory power plant, 5. utilization of distiller waste. The tests, accomplished on a laboratory scale, showed the high efficiency of these methods. Economic analysis has proved that only four out of the five presented processes can have a positive financial effect on soda ash factories, as well as being well justified economically. The value of two of the innovations presented is confirmed by their implementation in factories.

Recent progress in neutrino factory and muon collider research within the Muon Collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. M. Alsharoa; Charles M. Ankenbrandt; Muzaffer Atac

2003-08-01

We describe the status of our effort to realize a first neutrino factory and the progress made in understanding the problems associated with the collection and cooling of muons towards that end. We summarize the physics that can be done with neutrino factories as well as with intense cold beams of muons. The physics potential of muon colliders is reviewed, both as Higgs Factories and compact high energy lepton colliders. The status and timescale of our research and development effort is reviewed as well as the latest designs in cooling channels including the promise of ring coolers in achieving longitudinalmore » and transverse cooling simultaneously. We detail the efforts being made to mount an international cooling experiment to demonstrate the ionization cooling of muons.« less

Ergonomic analysis jobs in recovered factories.

PubMed

Cuenca, Gabriela; Zotta, Gastón

2012-01-01

With the advent of the deep economic crisis in Argentina on 2001, the recovery of companies through to the creation of the Cooperatives Working Self-Management or Factories Recovered by its workers was constituted as one of the ways in which the salaried disobeyed the increasing unemployment. When the companies turn into recovered factories they tend to leave of side practices that have been seen like imposed by the previous organization and not understanding them as a primary condition for the execution of his tasks. Safety and ergonomics are two disciplines that are no longer considered relevant to the daily work. Therefore this investigation aims to revalue, undergo semantic to give back to a place in every organization analyzed. This research developed a self-diagnostic tool for working conditions, and the environment, present in the recovered factories.

Computational Nanotechnology of Materials, Electronics and Machines: Carbon Nanotubes

NASA Technical Reports Server (NTRS)

Srivastava, Deepak

2001-01-01

This report presents the goals and research of the Integrated Product Team (IPT) on Devices and Nanotechnology. NASA's needs for this technology are discussed and then related to the research focus of the team. The two areas of focus for technique development are: 1) large scale classical molecular dynamics on a shared memory architecture machine; and 2) quantum molecular dynamics methodology. The areas of focus for research are: 1) nanomechanics/materials; 2) carbon based electronics; 3) BxCyNz composite nanotubes and junctions; 4) nano mechano-electronics; and 5) nano mechano-chemistry.

Electrostatically focused addressable field emission array chips (AFEA's) for high-speed massively parallel maskless digital E-beam direct write lithography and scanning electron microscopy

DOEpatents

Thomas, Clarence E.; Baylor, Larry R.; Voelkl, Edgar; Simpson, Michael L.; Paulus, Michael J.; Lowndes, Douglas H.; Whealton, John H.; Whitson, John C.; Wilgen, John B.

2002-12-24

Systems and methods are described for addressable field emission array (AFEA) chips. A method of operating an addressable field-emission array, includes: generating a plurality of electron beams from a pluralitly of emitters that compose the addressable field-emission array; and focusing at least one of the plurality of electron beams with an on-chip electrostatic focusing stack. The systems and methods provide advantages including the avoidance of space-charge blow-up.

Generalized Factorial Moments

NASA Astrophysics Data System (ADS)

Bialas, A.

2004-02-01

It is shown that the method of eliminating the statistical fluctuations from event-by-event analysis proposed recently by Fu and Liu can be rewritten in a compact form involving the generalized factorial moments.

Virtual Factory Framework for Supporting Production Planning and Control.

PubMed

Kibira, Deogratias; Shao, Guodong

2017-01-01

Developing optimal production plans for smart manufacturing systems is challenging because shop floor events change dynamically. A virtual factory incorporating engineering tools, simulation, and optimization generates and communicates performance data to guide wise decision making for different control levels. This paper describes such a platform specifically for production planning. We also discuss verification and validation of the constituent models. A case study of a machine shop is used to demonstrate data generation for production planning in a virtual factory.

Development of muon ring coolers, neutrino factories and supersymmetric Higgs factory

NASA Astrophysics Data System (ADS)

Cline, David B.

2003-08-01

Over the past few years or so a key new development is the invention of ring coolers for muon cooling. In particular, these rings demonstrate robust cooling of the longitudinal phase space. We discuss the quadrupole or UCLA ring cooler and the prospects to make this a final cooler to reduce the transceiver emittance to the value required for a mu+mu- collider. This will lead to a Higgs factory for the A0/H0 in supersymmetry models.

Development of Muon Ring Coolers, Neutrino Factories and Supersymmetric Higgs Factory

NASA Astrophysics Data System (ADS)

Cline, David B.

2002-12-01

Over the past few years or so a key new development is the invention of Ring Coolers for muon cooling. In particular these rings demonstrate robust cooling of the longitudinal phase space. We discuss the Quadrupole or UCLA Ring Cooler and the prospects to make this a final cooler to reduce the tranceiver emittance to the value required for a μ+ μ- collider. This will lead to a Higgs Factory for the A0/H0 in supersymmetry models.

Radiative Penguin Decays at the B Factories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koneke, Karsten; /MIT, LNS

2007-11-16

In this article, I review the most recent results in radiative penguin decays from the B factories Belle and BABAR. Most notably, I will talk about the recent new observations in the decays B {yields} ({rho}/{omega}) {gamma}, a new analysis technique in b {yields} s{gamma}, and first measurements of radiative penguin decays in the B{sup 0}{sub s} meson system. Finally, I will summarize the current status and future prospects of radiative penguin B physics at the B factories.

26. SOUTH TO CIRCA 1865 METALTURNING LATHE (POSSIBLY MADE BY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. SOUTH TO CIRCA 1865 METAL-TURNING LATHE (POSSIBLY MADE BY AMES MFG. CO., CHICOPEE, MASS.) WITH PARTS/TOOL BINS ALONG EAST INTERIOR WALL OF FACTORY. BENEATH THE LATHE ON THE FLOOR IS A STACK OF AUTOMOBILE AXLES AS 'RAW MATERIAL' FOR FABRICATING REPAIR PARTS FOR PUMPS AND WATER SUPPLY EQUIPMENT. ON THE POST BEHIND THE MACHINE IS ONE OF THE HISTORIC ELECTRICAL FUSE/SWITCH BOXES FOR THE FACTORY. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

Development of integrated control system for smart factory in the injection molding process

NASA Astrophysics Data System (ADS)

Chung, M. J.; Kim, C. Y.

2018-03-01

In this study, we proposed integrated control system for automation of injection molding process required for construction of smart factory. The injection molding process consists of heating, tool close, injection, cooling, tool open, and take-out. Take-out robot controller, image processing module, and process data acquisition interface module are developed and assembled to integrated control system. By adoption of integrated control system, the injection molding process can be simplified and the cost for construction of smart factory can be inexpensive.

Microeconomics of 300-mm process module control

NASA Astrophysics Data System (ADS)

Monahan, Kevin M.; Chatterjee, Arun K.; Falessi, Georges; Levy, Ady; Stoller, Meryl D.

2001-08-01

Simple microeconomic models that directly link metrology, yield, and profitability are rare or non-existent. In this work, we validate and apply such a model. Using a small number of input parameters, we explain current yield management practices in 200 mm factories. The model is then used to extrapolate requirements for 300 mm factories, including the impact of simultaneous technology transitions to 130nm lithography and integrated metrology. To support our conclusions, we use examples relevant to factory-wide photo module control.

21. SOUTH THROUGH FACTORY FROM NEAR NORTHEAST CORNER TOWARD SOUTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. SOUTH THROUGH FACTORY FROM NEAR NORTHEAST CORNER TOWARD SOUTH FRONT OF BUILDING. VISIBLE FROM LEFT TO RIGHT ARE CIRCA 1865 METAL-TURNING LATHE; CIRCA 1875 POWER SHEAR, PUNCH, AND RIVETING MACHINE (WITH FLOORING RAISED TO SHOW OPERATOR'S 'PIT'); LINE SHAFT WITH PULLEYS AND BELTS FOR OPERATING MACHINERY; PERMANENT WOODEN LADDER TO SKYLIGHT AREA (LOCATION OF CIRCA 1920 ELECTRIC MOTOR WHICH POWERED LINE SHAFT); AND BUFFALO FORGE CO. HAND SHEAR FOR ANGLE STEEL. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

9. NORTHEAST FROM SOUTH ENTRANCE ACROSS RECEIVING AREA OF FACTORY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. NORTHEAST FROM SOUTH ENTRANCE ACROSS RECEIVING AREA OF FACTORY PAST THE GLASS-ENCLOSED OFFICE TOWARD SHOP AREA. BESIDE THE VERTICAL POST ROOF SUPPORT IN THE LEFT FOREGROUND IS A SCALE AND DRAFTING TABLE. BESIDE THE OFFICE WALL ON THE RIGHT IS A SMALL SHOP REPAIR BENCH, WHILE ABOVE THE OFFICE WINDOWS ARE BOXES OF COMPANY MANUSCRIPT BUSINESS RECORDS. THE WELDED METAL PIPE RACK IS A MODERN INTRUSION. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

Carbonate factories: A conundrum in sedimentary geology

NASA Astrophysics Data System (ADS)

Pomar, L.; Hallock, P.

2008-03-01

Describing, characterizing and interpreting the nearly infinite variety of carbonate rocks are conundrums - intricate and difficult problems having only conjectural answers - that have occupied geologists for more than two centuries. Depositional features including components, rock textures, lithofacies, platform types and architecture, all vary in space and time, as do the results of diagenetic processes on those primary features. Approaches to the study of carbonate rocks have become progressively more analytical. One focus has evolved from efforts to build reference models for specific Phanerozoic windows to scrutinize the effect of climate and long-term oscillations of the ocean-atmosphere system in influencing the mineralogy of carbonate components. This paper adds to the ongoing lively debates by attempting to understand changes in the predominant types of carbonate-producing organisms during the Mesozoic-Cenozoic, while striving to minimize the uniformitarian bias. Our approach integrates estimates of changes in Ca 2+ concentration in seawater and atmospheric CO 2, with biological evolution and ecological requirements of characteristic carbonate-producing marine communities. The underlying rationale for our approach is the fact that CO 2 is basic to both carbonates and organic matter, and that photosynthesis is a fundamental biological process responsible for both primary production of organic matter and providing chemical environments that promote calcification. Gross photosynthesis and hypercalcification are dependent largely upon sunlight, while net primary production and, e.g., subsequent burial of organic matter typically requires sources of new nutrients (N, P and trace elements). Our approach plausibly explains the changing character of carbonate production as an evolving response to changing environmental conditions driven by the geotectonic cycle, while identifying uncertainties that deserve further research. With metazoan consumer diversity reduced by the end-Permian extinctions, excess photosynthesis by phytoplankton and microbial assemblages in surface waters, induced by moderately high CO 2 and temperature during the Early Mesozoic, supported proliferation of non-tissular metazoans (e.g., sponges) and heterotrophic bacteria at the sea floor. Metabolic activity by those microbes, especially sulfate reduction, resulted in abundant biologically-induced geochemical carbonate precipitation on and within the sea floor. For example, with the opening of Tethyan seaways during the Triassic, massive sponge/microbe boundstones (the benthic automicrite factory) formed steep, massive and thick progradational slopes and, locally, mud-mounds. As tectonic processes created shallow epicontinental seas, photosynthesis drove lime-mud precipitation in the illuminated zone of the water column. The resulting neritic lime-mud component of the shallow-water carbonate factory became predominant during the Jurassic, paralleling the increase in atmospheric pCO 2, while the decreasing importance of the benthic automicrite factory parallels the diversification of calcifying metazoans, phytoplankton and zooplankton. With atmospheric pCO 2 declining through the Cretaceous, the potential habitats for neritic lime-mud precipitation declined. At the same time, peak oceanic Ca 2+ concentrations promoted biotically-controlled calcification by the skeletal factory. With changes produced by extinctions and turnovers at the Cretaceous-Tertiary boundary, adaptations to decreasing Ca 2+ and pCO 2, coupled with increasing global temperature gradients (i.e., high-latitude and deep-water cooling), and strategies that efficiently linked photosynthesis and calcification, promoted successive changes of the dominant skeletal factory through the Cenozoic: larger benthic foraminifers (protist-protist symbiosis) during the Paleogene, red algae during the Miocene and modern coral reefs (metazoan-protist symbiosis) since Late Miocene.

Electron Acceleration by Beating of Two Intense Cross-Focused Hollow Gaussian Laser Beams in Plasma

NASA Astrophysics Data System (ADS)

Mahmoud, Saleh T.; Gauniyal, Rakhi; Ahmad, Nafis; Rawat, Priyanka; Purohit, Gunjan

2018-01-01

This paper presents propagation of two cross-focused intense hollow Gaussian laser beams (HGBs) in collisionless plasma and its effect on the generation of electron plasma wave (EPW) and electron acceleration process, when relativistic and ponderomotive nonlinearities are simultaneously operative. Nonlinear differential equations have been set up for beamwidth of laser beams, power of generated EPW, and energy gain by electrons using WKB and paraxial approximations. Numerical simulations have been carried out to investigate the effect of typical laser-plasma parameters on the focusing of laser beams in plasmas and further its effect on power of excited EPW and acceleration of electrons. It is observed that focusing of two laser beams in plasma increases for higher order of hollow Gaussian beams, which significantly enhanced the power of generated EPW and energy gain. The amplitude of EPW and energy gain by electrons is found to enhance with an increase in the intensity of laser beams and plasma density. This study will be useful to plasma beat wave accelerator and in other applications requiring multiple laser beams. Supported by United Arab Emirates University for Financial under Grant No. UPAR (2014)-31S164

Creating and Steering Highly Directional Electron Beams in Graphene.

PubMed

Liu, Ming-Hao; Gorini, Cosimo; Richter, Klaus

2017-02-10

We put forward a concept to create highly collimated, nondispersive electron beams in pseudorelativistic Dirac materials such as graphene or topological insulator surfaces. Combining negative refraction and Klein collimation at a parabolic pn junction, the proposed lens generates beams, as narrow as the focal length, that stay focused over scales of several microns and can be steered by a magnetic field without losing collimation. We demonstrate the lens capabilities by applying it to two paradigmatic settings of graphene electron optics: We propose a setup for observing high-resolution angle-dependent Klein tunneling, and, exploiting the intimate quantum-to-classical correspondence of these focused electron waves, we consider high-fidelity transverse magnetic focusing accompanied by simulations for current mapping through scanning gate microscopy. Our proposal opens up new perspectives for next-generation graphene electron optics experiments.

High-gain thompson-scattering X-ray free-electron laser by time-synchronic laterally tilted optical wave

DOEpatents

Chang, Chao; Tang, Chuanxiang; Wu, Juhao

2017-05-09

An improved optical undulator for use in connection with free electron radiation sources is provided. A tilt is introduced between phase fronts of an optical pulse and the pulse front. Two such pulses in a counter-propagating geometry overlap to create a standing wave pattern. A line focus is used to increase the intensity of this standing wave pattern. An electron beam is aligned with the line focus. The relative angle between pulse front and phase fronts is adjusted such that there is a velocity match between the electron beam and the overlapping optical pulses along the line focus. This allows one to provide a long interaction length using short and intense optical pulses, thereby greatly increasing the radiation output from the electron beam as it passes through this optical undulator.

Creating and Steering Highly Directional Electron Beams in Graphene

NASA Astrophysics Data System (ADS)

Liu, Ming-Hao; Gorini, Cosimo; Richter, Klaus

2017-02-01

We put forward a concept to create highly collimated, nondispersive electron beams in pseudorelativistic Dirac materials such as graphene or topological insulator surfaces. Combining negative refraction and Klein collimation at a parabolic p n junction, the proposed lens generates beams, as narrow as the focal length, that stay focused over scales of several microns and can be steered by a magnetic field without losing collimation. We demonstrate the lens capabilities by applying it to two paradigmatic settings of graphene electron optics: We propose a setup for observing high-resolution angle-dependent Klein tunneling, and, exploiting the intimate quantum-to-classical correspondence of these focused electron waves, we consider high-fidelity transverse magnetic focusing accompanied by simulations for current mapping through scanning gate microscopy. Our proposal opens up new perspectives for next-generation graphene electron optics experiments.

Laser acceleration of electrons to giga-electron-volt energies using highly charged ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, S. X.; Starace, Anthony F.

2006-06-15

The recent proposal to use highly charged ions as sources of electrons for laser acceleration [S. X. Hu and A. F. Starace, Phys. Rev. Lett. 88, 245003 (2002)] is investigated here in detail by means of three-dimensional, relativistic Monte Carlo simulations for a variety of system parameters, such as laser pulse duration, ionic charge state, and laser focusing spot size. Realistic laser focusing effects--e.g., the existence of longitudinal laser field components--are taken into account. Results of spatial averaging over the laser focus are also presented. These numerical simulations show that the proposed scheme for laser acceleration of electrons from highlymore » charged ions is feasible with current or near-future experimental conditions and that electrons with GeV energies can be obtained in such experiments.« less

Local electric field direct writing – Electron-beam lithography and mechanism

DOE PAGES

Jiang, Nan; Su, Dong; Spence, John C. H.

2017-08-24

Local electric field induced by a focused electron probe in silicate glass thin films is evaluated in this paper by the migration of cations. Extremely strong local electric fields can be obtained by the focused electron probe from a scanning transmission electron microscope. As a result, collective atomic displacements occur. This newly revised mechanism provides an efficient tool to write patterned nanostructures directly, and thus overcome the low efficiency of the conventional electron-beam lithography. Applying this technique to silicate glass thin films, as an example, a grid of rods of nanometer dimension can be efficiently produced by rapidly scanning amore » focused electron probe. This nanopatterning is achieved through swift phase separation in the sample, without any post-development processes. The controlled phase separation is induced by massive displacements of cations (glass modifiers) within the glass-former network, driven by the strong local electric fields. The electric field is induced by accumulated charge within the electron probed region, which is generated by the excitation of atomic electrons by the incident electron. Throughput is much improved compared to other scanning probe techniques. Finally, the half-pitch spatial resolution of nanostructure in this particular specimen is 2.5 nm.« less

Local electric field direct writing – Electron-beam lithography and mechanism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Nan; Su, Dong; Spence, John C. H.

Local electric field induced by a focused electron probe in silicate glass thin films is evaluated in this paper by the migration of cations. Extremely strong local electric fields can be obtained by the focused electron probe from a scanning transmission electron microscope. As a result, collective atomic displacements occur. This newly revised mechanism provides an efficient tool to write patterned nanostructures directly, and thus overcome the low efficiency of the conventional electron-beam lithography. Applying this technique to silicate glass thin films, as an example, a grid of rods of nanometer dimension can be efficiently produced by rapidly scanning amore » focused electron probe. This nanopatterning is achieved through swift phase separation in the sample, without any post-development processes. The controlled phase separation is induced by massive displacements of cations (glass modifiers) within the glass-former network, driven by the strong local electric fields. The electric field is induced by accumulated charge within the electron probed region, which is generated by the excitation of atomic electrons by the incident electron. Throughput is much improved compared to other scanning probe techniques. Finally, the half-pitch spatial resolution of nanostructure in this particular specimen is 2.5 nm.« less