Science.gov

Sample records for force base delaware

  1. Field-scale demonstration of induced biogeochemical reductive dechlorination at Dover Air Force Base, Dover, Delaware.

    PubMed

    Kennedy, Lonnie G; Everett, Jess W; Becvar, Erica; DeFeo, Donald

    2006-11-20

    Biogeochemical reductive dechlorination (BiRD) is a new remediation approach for chlorinated aliphatic hydrocarbons (CAHs). The approach stimulates common sulfate-reducing soil bacteria, facilitating the geochemical conversion of native iron minerals into iron sulfides. Iron sulfides have the ability to chemically reduce many common CAH compounds including PCE, TCE, DCE, similar to zero valent iron (Fe(0)). Results of a field test at Dover Air Force Base, Dover, Delaware, are given in this paper. BiRD was stimulated by direct injection of Epson salt (MgSO(4).7H(2)O) and sodium (L) lactate (NaC(3)H(5)O(3)) in five injection wells. Sediment was sampled before and 8 months after injection. Significant iron sulfide minerals developed in the sandy aquifer matrix. From ground water analyses, treatment began a few weeks after injection with up to 95% reduction in PCE, TCE, and cDCE in less than 1 year. More complete CAH treatment is likely at a larger scale than this demonstration.

  2. Hydrogeology and simulation of ground-water flow at Dover Air Force Base, Delaware

    USGS Publications Warehouse

    Hinaman, Kurt C.; Tenbus, Frederick J.

    2000-01-01

    Dover Air Force Base in Kent County, Delaware, has many contaminated sites that are in active remediation. To assist in this remediation, a steady-state model of ground-water flow was developed to aid in understanding the hydrology of the system, and for use as a ground-watermanagement tool. This report describes the hydrology on which the model is based, a description of the model itself, and some applications of the model.Dover Air Force Base is underlain by unconsolidated sediments of the Atlantic Coastal Plain. The primary units that were investigated include the upper Calvert Formation and the overlying Columbia Formation. The uppermost sand unit in the Calvert Formation at Dover Air Force Base is the Frederica aquifer, which is the deepest unit investigated in this report. A confining unit of clayey silt in the upper Calvert Formation separates the Frederica aquifer from the lower surficial aquifer, which is the basal Columbia Formation. North and northwest of Dover Air Force Base, the Frederica aquifer subcrops beneath the Columbia Formation and the upper Calvert Formation confining unit is absent. The Calvert Formation dips to the southeast. The Columbia Formation consists predominately of sands, silts, and gravels, although in places there are clay layers that separate the surficial aquifer into an upper and lower surficial aquifer. The areal extent of these clay layers has been mapped by use of gamma logs. Long-term hydrographs reveal substantial changes in both seasonal and annual ground-water recharge. These variations in recharge are related to temporal changes in evaporation, transpiration, and precipitation. The hydrographs show areas where extensive silts and clays are present in the surficial aquifer. In these areas, the vertical gradient between water levels in wells screened above and below the clays can be as large as several feet, and local ground-water highs typically form during normal recharge conditions. When drought conditions persist

  3. Field demonstration of surfactant-enhanced solubilization of DNAPL at Dover Air Force Base, Delaware.

    PubMed

    Childs, Jeffrey; Acosta, Edgar; Annable, Michael D; Brooks, Michael C; Enfield, Carl G; Harwell, Jeffrey H; Hasegawa, Mark; Knox, Robert C; Rao, P Suresh C; Sabatini, David A; Shiau, Ben; Szekeres, Erika; Wood, A Lynn

    2006-01-01

    This study reports on a surfactant-based flood for tetrachloroethylene (PCE) removal from a control test cell at the Dover National Test Site. The surfactant formulation (sodium dihexyl sulfosuccinate (Aerosol-MA or AMA), isopropanol and calcium chloride) was able to achieve a high concentration of PCE in swollen micelles (supersolubilization) without vertical PCE migration. The hydraulic system included eight screened wells that were operated in both vertical circulation and line drive configurations. After 10 pore volumes of flushing, the overall PCE removal was 68% (65% of which corresponded to the surfactant flooding alone). In addition, the residual PCE saturation was reduced from 0.7% to 0.2%, and the concentration of PCE in the groundwater was reduced from 37-190 mg/L before the flushing to 7.3 mg/L after flooding. Recycling the surfactant solution reduced the required surfactant mass (and thus cost, and waste) by 90%. Close to 80% of the total PCE removal was obtained during the first five pore volumes which were operated in an upward vertical circulation flow scheme. No free oil phase was observed during the test. Further analysis of multilevel sampler data suggests that most of the trapped oil remaining in the cell was likely localized in secluded regions of the aquifer, which helps explain the lower PCE groundwater concentration after remedial activities. In summary, this field study demonstrated the feasibility of surfactant-enhanced remediation to reduce the mass in the source zone and significantly reduce the PCE aqueous concentration and therefore the risk associated with the contaminant plume.

  4. Analytical results from ground-water sampling using a direct-push technique at the Dover National Test Site, Dover Air Force Base, Delaware, June-July 2001

    USGS Publications Warehouse

    Guertal, William R.; Stewart, Marie; Barbaro, Jeffrey R.; McHale, Timthoy J.

    2004-01-01

    A joint study by the Dover National Test Site and the U.S. Geological Survey was conducted from June 27 through July 18, 2001 to determine the spatial distribution of the gasoline oxygenate additive methyl tert-butyl ether and selected water-quality constituents in the surficial aquifer underlying the Dover National Test Site at Dover Air Force Base, Delaware. The study was conducted to support a planned enhanced bio-remediation demonstration and to assist the Dover National Test Site in identifying possible locations for future methyl tert-butyl ether remediation demonstrations. This report presents the analytical results from ground-water samples collected during the direct-push ground-water sampling study. A direct-push drill rig was used to quickly collect 115 ground-water samples over a large area at varying depths. The ground-water samples and associated quality-control samples were analyzed for volatile organic compounds and methyl tert-butyl ether by the Dover National Test Site analytical laboratory. Volatile organic compounds were above the method reporting limits in 59 of the 115 ground-water samples. The concentrations ranged from below detection limits to maximum values of 12.4 micrograms per liter of cis-1,2-dichloroethene, 1.14 micrograms per liter of trichloroethene, 2.65 micrograms per liter of tetrachloroethene, 1,070 micrograms per liter of methyl tert-butyl ether, 4.36 micrograms per liter of benzene, and 1.8 micrograms per liter of toluene. Vinyl chloride, ethylbenzene, p,m-xylene, and o-xylene were not detected in any of the samples collected during this investigation. Methyl tert-butyl ether was detected in 47 of the 115 ground-water samples. The highest methyl tert-butyl ether concentrations were found in the surficial aquifer from -4.6 to 6.4 feet mean sea level, however, methyl tert-butyl ether was detected as deep as -9.5 feet mean sea level. Increased methane concentrations and decreased dissolved oxygen concentrations were found in

  5. Assessment of natural attenuation of ground-water contamination at sites FT03, LF13, and WP14/LF15, Dover Air Force Base, Delaware

    USGS Publications Warehouse

    Barbaro, Jeffrey R.

    2002-01-01

    Water-quality, aquifer-sediment, and hydro-logic data were used to assess the effectiveness of natural attenuation of ground-water contamination at Fire Training Area Three, the Rubble Area Landfill, the Liquid Waste Disposal Landfill, and the Receiver Station Landfill in the East Management Unit of Dover Air Force Base, Delaware. These sites, which are contaminated with chlorinated solvents and fuel hydrocarbons, are under-going long-term monitoring to determine if natural attenuation continues to sufficiently reduce contaminant concentrations to meet regulatory requirements. This report is the first assessment of the effectiveness of natural attenuation at these sites since long-term monitoring began in 1999, and follows a preliminary investigation done in 1995?96. This assessment was done by the U.S. Geological Survey in cooperation with the U.S. Air Force.Since 1995?96, additional information has been collected and used in the current assessment. The conclusions in this report are based primarily on ground-water samples collected from January through March 2000. Previous analytical results from selected wells, available geologic and geo-physical well logs, and newly acquired information such as sediment organic-carbon measurements, hydraulic-conductivity measurements determined from slug tests on wells in the natural attenuation study area, and water-level measurements from surficial-aquifer wells also were used in this assessment. This information was used to: (1) calculate retardation factors and estimate contaminant migration velocities, (2) improve estimates of ground-water flow directions and inferred contaminant migration pathways, (3) better define the areal extent of contamination and the proximity of contaminants to discharge areas and the Base boundary, (4) develop a better under-standing of the vertical variability of contaminant concentrations and redox conditions, (5) evaluate the effects of temporal changes on concentrations in the plumes and

  6. Distribution and mass loss of volatile organic compounds in the surficial aquifer at sites FT03, LF13, and WP14/LF15, Dover Air Force Base, Delaware, November 2000-February 2001

    USGS Publications Warehouse

    Barbaro, Jeffrey R.; Neupane, Pradumna P.

    2002-01-01

    Ground-water and surface-water sampling was conducted in the natural attenuation study area in the East Management Unit of Dover Air Force Base, Delaware to determine the distributions of volatile organic compounds in the vicinity of four sites?Fire Training Area Three, the Rubble Area Landfill, the Receiver Station Landfill, and the Liquid Waste Disposal Landfill. This work was done by the U.S. Geological Survey, in cooperation with the U.S. Air Force, as part of an ongoing assessment of the effectiveness of natural attenuation at these sites. The specific objectives of the study were to (1) determine the areal and vertical extent of the contaminant plumes and source areas, (2) measure volatile organic compound concentrations in ground-water discharge areas and in surface water under base-flow conditions, (3) evaluate the potential for off-site migration of the mapped plumes, and (4) estimate the amount of mass loss downgradient of the Liquid Waste Disposal and Receiver Station Landfills. A direct-push drill rig and previously installed multi-level piezometers were used to determine the three-dimensional distributions of volatile organic compounds in the 30?60-foot-thick surficial aquifer underlying the natural attenuation study area. A hand -driven mini-piezometer was used to collect ground-water samples in ground-water discharge areas. A total of 319 ground-water and 4 surface-water samples were collected from November 2000 to February 2001 and analyzed for chlorinated solvents and fuel hydrocarbons. The contaminant plumes migrating from Fire Training Area Three and the Rubble Area Landfill are approximately 500 feet and 800 feet, respectively, in length. These plumes consist predominantly of cis-1,2-dichloroethene, a daughter product, indicating that extensive dechlorination of tetrachloroethene and trichloroethene has occurred at these sites. With an approximate length of 2,200 feet, the plume migrating from the Receiver Station and Liquid Waste Disposal

  7. Report B: 1986 projected population, labor force and unemployment - Delaware

    SciTech Connect

    Not Available

    1985-09-01

    Report B, the results of the Population, Labor Force and Unemployment Projections Model, contain current socio-economic indicators. For each geographic area, there is one page of summary/background information followed by three tables. These tables contain the population projections, the labor force projections, and the unemployment projections, respectively. These tables are composed of data for the following racial groups: total population, whites, blacks, and other races. Those who call themselves Hispanics may be covered in any of the last three racial groups. For those geographic areas which have provided more than one labor force and/or unemployment control total, the last two tables will appear more than once.

  8. Distribution of methyl tert-butyl ether (MTBE) and selected water-quality constituents in the surficial aquifer at the Dover National Test Site, Dover Air Force Base, Delaware, 2001

    USGS Publications Warehouse

    Stewart, Marie; Guertal, William R.; Barbaro, Jeffrey R.; McHale, Timothy J.

    2004-01-01

    A joint study by the Dover National Test Site, Dover Air Force Base, Delaware, and the U.S. Geological Survey was conducted from June 27 through July 18, 2001, to determine the spatial distribution of the gasoline oxygenate additive methyl tert-butyl ether and selected water-quality constituents in the surficial aquifer underlying the Dover National Test Site. This report provides a summary assessment of the distribution of methyl tert-butyl ether and a preliminary screening of selected constituents that may affect natural attenuation and remediation demonstrations at the Dover National Test Site. The information gathered during this study is designed to assist potential remedial investigators who are considering conducting a methyl tert-butyl ether remedial demonstration at the test site. In addition, the study supported a planned enhanced bioremediation demonstration and assisted the Dover National Test Site in identifying possible locations for future methyl tert-butyl ether remediation demonstrations. A direct-push drill rig was used to collect a total of 147 ground-water samples (115 VOC samples and 32 quality-assurance samples) at varying depths. Volatile organic compounds were above the method reporting limits in 59 of the 115 ground-water samples. The concentrations ranged from below detection limits to maximum values of 12.4 micrograms per liter of cis-1,2-dichloro-ethene, 1.14 micrograms per liter of trichloro-ethene, 2.65 micrograms per liter of tetrachloro-ethene, 1,070 micrograms per liter of methyl tert-butyl ether, 4.36 micrograms per liter of benzene, and 1.8 micrograms per liter of toluene. Vinyl chloride, ethylbenzene, p,m-xylene, and o-xylene were not detected in any of the samples collected during this investigation. Methyl tert-butyl ether was detected in 47 of the 115 ground-water samples. The highest concentrations of methyl tert-butyl ether were detected in the surficial aquifer from ?4.6 to 6.4 feet mean sea level; however, methyl tert

  9. The Delaware Geography-Health Initiative: Lessons Learned in Designing a GIS-Based Curriculum

    ERIC Educational Resources Information Center

    Rees, Peter W.; Silberman, Jordan A.

    2010-01-01

    The Delaware Geography-Health Initiative is a Web- and GIS-based set of lesson units for teaching geographic concepts and research methods within the context of the state's high school geography standards. Each unit follows a research-based, inquiry-centered model addressing questions of health because of Delaware's high incidence of cancer,…

  10. 44. BOILER HOUSE FOURTH FLOOR, GENERAL VIEW OF BASE OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. BOILER HOUSE FOURTH FLOOR, GENERAL VIEW OF BASE OF STACKS, FORCED DRAFT FANS, AND COAL BUNKER LOOKING TO COAL BUNKER - Delaware County Electric Company, Chester Station, Delaware River at South end of Ward Street, Chester, Delaware County, PA

  11. Orbital forced rhythmites in the upper Lamar Limestone (Guadalupian) of the Delaware Basin, West Texas, USA

    NASA Astrophysics Data System (ADS)

    Jin, Y.; Xuan, C.; Noble, P. J.

    2010-12-01

    Gray scale data, radiolarian relative abundance, and three types of geochemical data (oxygen isotope of bulk carbonates, organic carbon isotope, and total organic carbon) collected from an ~8 m section of the upper Lamar Limestone (Guadalupian) in the Delaware Basin, West Texas, USA, show apparent rhythms that mimic orbital variations. Spectral analyses on the radiolarian relative abundance and geochemical data, using Blackman-Tukey, multi-taper, maximum entropy, and REDFIT (Schulz, M., Mudelsee, M., 2002, REDFIT: estimating red-noise spectra directly from unevenly spaced paleoclimatic time series. Comput. Geosci. 28, 421-426) methods, reveal a common period with cycle length of ~1.16 m. Another spectral peak, which corresponds to period with cycle length of ~5.50 m, appears to be common in power spectra of the geochemical proxies. Power spectra of the high-resolution gray scale data are dominated by periods that have cycle length around 1.2-1.6 m, 0.67 m, 0.24-0.31 m, 0.14-0.18 m, and 0.07-0.09 m. Wavelet analyses confirm the existence of these cycles, and suggest that the power of the dominant periods in these parameters varies through the section, presumably due to accumulation rate variations. Average spectral misfit calculation (Meyers, S.R., Sageman, B.B., 2007, Quantification of deep-time orbital forcing by average spectral misfit. Am. J. Sci. 307, 773-792) using dominant frequencies from the power spectra of the gray scale data implies that average accumulation rates of ~1.5 cm/kyr provide the best fit of the data to orbital frequencies. Statistic tests for rejecting the null hypothesis (no orbital signal), on a wide range of average accumulation rates, also suggest lowest significance levels of the tests for accumulation rates around 1.5 cm/kyr. The ~1.5 cm/kyr accumulation rates are within the accumulation rate range estimated for the Capitanian strata in the basin-margin facies of the Delaware Basin. The Lamar Limestone appears to record the eccentricity

  12. Synopsis of the University of Delaware's Office of Computer-Based Instruction.

    ERIC Educational Resources Information Center

    Hofstetter, Fred T.

    This brief paper presents background information and a description of the organizational structure and educational objectives of the Office of Computer-Based Instruction, formerly the Delaware PLATO project, whose name was changed to reflect the University's ongoing commitment to providing leadership in educational computing following the…

  13. Delaware's Dream Team

    ERIC Educational Resources Information Center

    Berry, John N., III

    2007-01-01

    To librarians at the Delaware Division of Libraries, Governor Ruth Ann Minner, Secretary of State Harriet Smith Windsor, and Assistant Secretary of State Rick Geisenberger are "the Delaware Dream Team." The governor and her team supported funding for the 2004 statewide effort that resulted in the Delaware Master Plan for Library Services and…

  14. Delaware's first serial killer.

    PubMed

    Inguito, G B; Sekula-Perlman, A; Lynch, M J; Callery, R T

    2000-11-01

    The violent murder of Shirley Ellis on November 29, 1987, marked the beginning of the strange and terrible tale of Steven Bryan Pennell's reign as the state of Delaware's first convicted serial killer. Three more bodies followed the first victim, and all had been brutally beaten and sadistically tortured. The body of a fifth woman has never been found. State and county police collaborated with the FBI to identify and hunt down their suspect, forming a task force of over 100 officers and spending about one million dollars. Through their knowledge and experience with other serial killers, the FBI was able to make an amazingly accurate psychological profile of Delaware's serial killer. After months of around-the-clock surveillance, Steven Pennell was arrested on November 29, 1988, one year to the day after the first victim was found. Pennell was found guilty in the deaths of the first two victims on November 29, 1989, and plead no contest to the murder of two others on October 30, 1991. Still maintaining his innocence, he asked for the death penalty so that he could spare his family further agony. Steven Pennell was executed by lethal injection on March 15, 1992.

  15. Delaware's first serial killer.

    PubMed

    Inguito, G B; Sekula-Perlman, A; Lynch, M J; Callery, R T

    2000-11-01

    The violent murder of Shirley Ellis on November 29, 1987, marked the beginning of the strange and terrible tale of Steven Bryan Pennell's reign as the state of Delaware's first convicted serial killer. Three more bodies followed the first victim, and all had been brutally beaten and sadistically tortured. The body of a fifth woman has never been found. State and county police collaborated with the FBI to identify and hunt down their suspect, forming a task force of over 100 officers and spending about one million dollars. Through their knowledge and experience with other serial killers, the FBI was able to make an amazingly accurate psychological profile of Delaware's serial killer. After months of around-the-clock surveillance, Steven Pennell was arrested on November 29, 1988, one year to the day after the first victim was found. Pennell was found guilty in the deaths of the first two victims on November 29, 1989, and plead no contest to the murder of two others on October 30, 1991. Still maintaining his innocence, he asked for the death penalty so that he could spare his family further agony. Steven Pennell was executed by lethal injection on March 15, 1992. PMID:11125664

  16. 43. BOILER HOUSE FOURTH FLOOR, CLOSER VIEW OF STACKS, FORCED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. BOILER HOUSE FOURTH FLOOR, CLOSER VIEW OF STACKS, FORCED DRAFT FANS, AND COAL BUNKER - Delaware County Electric Company, Chester Station, Delaware River at South end of Ward Street, Chester, Delaware County, PA

  17. Development of an IBI-based assessment of depressional wetlands in Maryland and Delaware

    USGS Publications Warehouse

    Sparling, D.W.; Keller, Michael; Lowe, T.P.; Perry, M.; Teels, B.; Brown, L.; Mazanti, L.; Melvin, N.

    1997-01-01

    The hydrogeomorphic approach (HGM) of wetland assessment emphasizes functional components of wetlands such as water storage, transformation and cycling of elements, accumulation of sediments, and preservation of habitats. Many of the elements measured in HGM are physical rather than ecological or biological. The HGM approach, therefore, provides information on certain aspects of wetlands and omits other aspects. In contrast, the Index of Biological Integrity (IBI) approach focuses on biological components of wetlands such as species richness, the presence or proportion of certain 'indicator' species, representation of different trophic levels, and measures of wildlife or fish health. Here too, some aspects of a wetland are omitted and others not covered by HGM are included. We contend that these differences in focus add strengths and weaknesses to each method. This paper reviews progress on the development of IBIs for restored depressional wetlands in the Mid-Atlantic States, especially Maryland and Delaware. During our first field season we identified 25 wetlands ranging from 1-10 acres, most of which were restored with federal, state, and private landowner cooperation over hydric soils. Separate IBIs are being created for macrophytes, macroinvertebrates, amphibians, and data on mammal and avian populations are being collected. Simultaneously, chemical and physical data are being collected on water DO, turbidity, temperature, conductivity, nitrates, ammonia, chlorophyll, pH; soil metal levels and texture; and wetland size, configuration, hydrology, drainage area, and surrounding land use.

  18. [Forced Oscillations of DNA Bases].

    PubMed

    Yakushevich, L V; Krasnobaeva, L A

    2016-01-01

    This paper presents the results of the studying of forced angular oscillations of the DNA bases with the help of the mathematical model consisting of two coupled nonlinear differential equations that take into account the effects of dissipation and the influence of an external periodic field. The calculation results are illustrated for sequence of gene encoding interferon alpha 17 (IFNA 17).

  19. [Forced Oscillations of DNA Bases].

    PubMed

    Yakushevich, L V; Krasnobaeva, L A

    2016-01-01

    This paper presents the results of the studying of forced angular oscillations of the DNA bases with the help of the mathematical model consisting of two coupled nonlinear differential equations that take into account the effects of dissipation and the influence of an external periodic field. The calculation results are illustrated for sequence of gene encoding interferon alpha 17 (IFNA 17). PMID:27192830

  20. Delaware: Library Automation and Networking.

    ERIC Educational Resources Information Center

    Sloan, Tom

    1996-01-01

    Describes automation and networking activities among Delaware libraries, including integrated library systems for public libraries, the Delaware Technical and Community College telecommunications network, Delaware Public Library Internet access planning, digital resources, a computer/technology training center, and the Delaware Center for…

  1. Study of salt transport processes in Delaware Bay

    USGS Publications Warehouse

    Walters, Roy

    1992-01-01

    The study described here is a subset of a broader climate-related study, and is focused primarily on salinity intrusion into Delaware Bay and River. Given changes in freshwater discharge into the Delaware River as determined from the larger study, and given probable sea level rise estimates, the purpose here is to calculate the distribution of salinity within Delaware Bay and River. The approach adopted for this study is composed of two parts: an analysis of existing physical data in order to derive a basic understanding of the salt dynamics, and numerical simulation of future conditions based on this analysis. There are two important constraints in the model used: it must resolve the spatial scales important to the salt dynamics, and it must be sufficiently efficient to allow extensive sensitivity studies. This has led to the development of a 3D model that uses harmonic decomposition in time and irregular finite elements in space. All nonlinear terms are retained in the governing equations, including quadratic bottom stress, advection, and wave transport (continuity nonlinearity). These equations are coupled to the advection-diffusion equation for salt so that density gradient forcing is included in the momentum equations. Although this study is still in progress, the model has reproduced sea level variations and the 3D structure of tidal and residual currents very well. In addition, the study has addressed the effects of a 1-meter rise in mean sea level on hydrodynamics of the study area. Current work is focused on salt dynamics.

  2. STATISTICAL ANALYSIS OF GROUNDWATER GEOCHEMISTRY DATA FROM AREA 6, DOVER AIR FORCE BASE, DOVER, DELAWARE

    EPA Science Inventory

    The work described in this report is part of a project undertaken by the Bioremediation of Chlorinated Solvents Action Team of the Remediation Technologies Development Forum, a joint U.S. Federal agency-industry collaboration, to study the natural attenuation of chlorinated ethen...

  3. 78 FR 14020 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; the 2002 Base Year...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-04

    ... 1997 Annual Fine Particulate Matter National Ambient Air Quality Standard AGENCY: Environmental... particulate matter (PM 2.5 ) national ambient air quality standard (NAAQS). EPA is approving the 2002 base year emissions inventory in accordance with the requirements of the Clean Air Act (CAA). DATES:...

  4. Delaware and SREB

    ERIC Educational Resources Information Center

    Southern Regional Education Board (SREB), 2009

    2009-01-01

    The Southern Regional Education Board (SREB) is a nonprofit organization that works collaboratively with Delaware and 15 other member states to improve education at every level--from pre-K to postdoctoral study--through many effective programs and initiatives. SREB's "Challenge to Lead Goals for Education", which calls for the region to lead the…

  5. Distributed Leadership in Delaware

    ERIC Educational Resources Information Center

    Buttram, Joan L.; Pizzini, Eric

    2009-01-01

    The Delaware Education Research and Development Center (DERDC) conducted a two-part study to determine the impacts of this program on participating schools in the state. In the first part, DERDC interviewed a sample of administrators and teachers from 6 of the 15 participating schools. Their responses helped design a survey that was administered…

  6. Delaware River Basin

    USGS Publications Warehouse

    Fischer, Jeffrey M.

    1999-01-01

    Assessing the quality of water in every location of the Nation would not be practical. Therefore, NAWQA investigations are conducted within 59 selected areas called study units (fig. 1). These study units encompass important river and aquifer systems in the United States and represent the diverse geographic, waterresource, land-use, and water-use characteristics of the Nation. The Delaware River Basin is one of 15 study units in which work began in 1996. Water-quality sampling in the study unit will begin in 1999. This fact sheet provides a brief overview of the NAWQA program, describes the Delaware River Basin study unit, identifies the major water-quality issues in the basin, and documents the plan of study that will be followed during the study-unit investigation.

  7. Selected streamflow data for the Delaware River basin

    USGS Publications Warehouse

    Schopp, Robert D.; Gillespie, Brian D.

    1979-01-01

    Selected streamflow data for the Delaware River basin include runoff-precipitation relationships for 28 selected subbasins for the period 1941-70; low-flow frequency curves for four mainstem Delaware River sites; monthly comparative duration curves and twenty year hydrographs at Montague and Trenton, New Jersey; and flow duration tables based on observed daily streamflow for gaging stations near 21 proposed dam sites. (Woodard-USGS)

  8. Hydrogeology of the West Branch Delaware River basin, Delaware County, New York

    USGS Publications Warehouse

    Reynolds, Richard J.

    2013-01-01

    along the southern divide. The depth to the top of the Marcellus Shale ranges from 3,240 ft along the northern basin divide to 4,150 ft along the southern basin divide. Yields of wells completed in the aquifer are as high as 500 gallons per minute (gal/min). Springs from fractured sandstone bedrock are an important source of domestic and small municipal water supplies in the West Branch Delaware River Basin and elsewhere in Delaware County. The average yield of 178 springs in Delaware County is 8.5 gal/min with a median yield of 3 gal/min. An analysis of two low-flow statistics indicates that groundwater contributions from fractured bedrock compose a significant part of the base flow of the West Branch Delaware River and its tributaries.

  9. Kids Count in Delaware, Families Count in Delaware: Fact Book, 2002.

    ERIC Educational Resources Information Center

    Delaware Univ., Newark. Kids Count in Delaware.

    This Kids Count Fact Book is combined with the Families Count Fact Book to provide information on statewide trends affecting children and families in Delaware. The Kids Count statistical profile is based on 11 main indicators of child well-being: (1) births to teens 15-17 years; (2) births to teens 10 to 14 years; (3) low birth weight babies; (3)…

  10. Unraveling Base Stacking Driving Forces in DNA.

    PubMed

    Mak, Chi H

    2016-07-01

    Base stacking is a key determinant of nucleic acid structures, but the precise origin of the thermodynamic driving force behind the stacking of nucleobases remains open. The rather mild stacking free energy measured experimentally, roughly a kcal/mol depending on the identity of the bases, is physiologically significant because while base stacking confers stability to the genome in its double helix form, the duplex also has to be unwound in order to be replicated or transcribed. A stacking free energy that is either too high or too low will over- or understabilize the genome, impacting the storage of genetic information and also its retrieval. While the molecular origin of stacking driving force has been attributed to many different sources including dispersion, electrostatics, and solvent hydrogen bonding, here we show via a systematic decomposition of the stacking free energy using large-scale computer simulations that the dominant driving force stabilizing base stacking is nonhydrophobic solvent entropy. Counteracting this is the conformational entropic penalty on the sugar-phosphate backbone against stacking, while solvent hydrogen-bonding, charge-charge interactions, and dispersive forces produce only secondary perturbations. Solvent entropic forces and DNA backbone conformational strains therefore work against each other, leading to a very mild composite stacking free energy in agreement with experiments. PMID:27045853

  11. 3. SOUTH SIDE. Edwards Air Force Base, South Base ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. SOUTH SIDE. - Edwards Air Force Base, South Base Sled Track, Firing & Control Blockhouse for 10,000-foot Track, South of Sled Track at midpoint of 20,000-foot track, Lancaster, Los Angeles County, CA

  12. State of Delaware Visual and Performing Arts Content Standards: Music, Visual Arts, Theatre, Dance, November 1997.

    ERIC Educational Resources Information Center

    Delaware State Dept. of Public Instruction, Dover.

    This guide to content standards in the visual and performing arts in the state of Delaware is the work of a curriculum framework commission whose members have crafted clear standards for development of curriculum that will prepare Delaware's students to become effective, productive citizens. Standards-based education reform is an initiative for…

  13. Libraries in Delaware: MedlinePlus

    MedlinePlus

    ... this page: https://medlineplus.gov/libraries/delaware.html Libraries in Delaware To use the sharing features on this page, please enable JavaScript. Dover Dover Public Library 45 South State Street Dover, DE 19901 302- ...

  14. Electrorheological Fluid Based Force Feedback Device

    NASA Technical Reports Server (NTRS)

    Pfeiffer, Charles; Bar-Cohen, Yoseph; Mavroidis, Constantinos; Dolgin, Benjamin

    1999-01-01

    Parallel to the efforts to develop fully autonomous robots, it is increasingly being realized that there are applications where it is essential to have a fully controlled robot and "feel" its operating conditions, i.e. telepresence. This trend is a result of the increasing efforts to address tasks where humans can perform significantly better but, due to associated hazards, distance, physical limitations and other causes, only robots can be employed to perform these tasks. Such robots need to be assisted by a human that remotely controls the operation. To address the goal of operating robots as human surrogates, the authors launched a study of mechanisms that provide mechanical feedback. For this purpose, electrorheological fluids (ERF) are being investigated for the potential application as miniature haptic devices. This family of electroactive fluids has the property of changing the viscosity during electrical stimulation. Consequently, ERF can be used to produce force feedback haptic devices for tele-operated control of medical and space robotic systems. Forces applied at the robot end-effector due to a compliant environment are reflected to the user using an ERF device where a change in the system viscosity will occur proportionally to the transmitted force. Analytical model and control algorithms are being developed taking into account the non-linearities of these type of devices. This paper will describe the concept and the developed mechanism of ERF based force feedback. The test process and the physical properties of this device will be described and the results of preliminary tests will be presented.

  15. New School of Management, Delaware State University, Dover, Delaware.

    ERIC Educational Resources Information Center

    Design Cost Data, 2001

    2001-01-01

    Presents features of Delaware State University's New School of Management designed to stimulate positive gains in teaching and learning. The design incorporates state of the art distance learning systems that includes a 350-seat auditorium possessing the same capability, and a commercial kitchen and dining facility for chef and hotel management…

  16. Nanoactuators Based on Electrostatic Forces on Dielectrics

    NASA Technical Reports Server (NTRS)

    Wang, Yu

    2005-01-01

    Nanoactuators of a proposed type would exploit the forces exerted by electric fields on dielectric materials. As used here, "nanoactuators" includes motors, manipulators, and other active mechanisms that have dimensions of the order of nanometers and/or are designed to manipulate objects that have dimensions of the order of nanometers. The underlying physical principle can be described most simply in terms of the example of a square parallel-plate capacitor in which a square dielectric plate is inserted part way into the gap between the electrode plates (see Figure Typically, the force is small from our macroscopic human perspective. The above equation shows that the force depends on the ratio between the capacitor dimensions but does not depend on the size. In other words, the force remains the same if the capacitor and the dielectric slab are shrunk to nanometer dimensions. At the same time, the masses of all components are proportional to third power of their linear dimensions. Therefore the force-to-mass ratio (and, consequently, the acceleration that can be imparted to the dielectric slab) is much larger at the nanoscale than at the macroscopic scale. The proposed actuators would exploit this effect. The upper part of Figure 2 depicts a simple linear actuator based on a parallel- plate capacitor similar to Figure 1. In this case, the upper electrode plate would be split into two parts (A and B) and the dielectric slab would be slightly longer than plate A or B. The actuator would be operated in a cycle. During the first half cycle, plate B would be grounded to the lower plate and plate A would be charged to a potential, V, with respect to the lower plate, causing the dielectric slab to be pulled under plate A. During the second half cycle, plate A would be grounded and plate B would be charged to potential V, causing the dielectric slab to be pulled under plate B. The back-and-forth motion caused by alternation of the voltages on plates A and B could be used

  17. Delaware Technical & Community College's response to the critical shortage of Delaware secondary science teachers

    NASA Astrophysics Data System (ADS)

    Campbell, Nancy S.

    This executive position paper examines the critical shortage of Delaware high school science teachers and Delaware Technical & Community College's possible role in addressing this shortage. A concise analysis of economic and political implications of the science teacher shortage is presented. The following topics were researched and evaluated: the specific science teacher needs for Delaware school districts; the science teacher education program offerings at Delaware universities and colleges; the Alternative Route to Teacher Certification (ARTC); and the state of Delaware's scholarship response to the need. Recommendations for Delaware Tech's role include the development and implementation of two new Associate of Arts of Teaching programs in physics secondary science education and chemistry secondary science education.

  18. Monitoring estuarine circulation and ocean waste dispersion using an integrated satellite-aircraft-drogue approach. [Delaware coast and Delaware Bay

    NASA Technical Reports Server (NTRS)

    Klemas, V. (Principal Investigator); Davis, G.; Wang, H.

    1975-01-01

    The author has identified the following significant results. An inexpensive, integrated drogue-aircraft-satellite approach was developed which is based on the Lagrangian technique and employs remotely tracked drogues and dyes together with satellite observation of natural tracers, such as suspended sediment. Results include current circulation studies in Delaware Bay in support of an oil slick movement model; investigations of the dispersion and movement of acid wastes dumped 40 miles off the Delaware coast; and coastal current circulation. In each case, the integrated drogue-aircraft-satellite approach compares favorably with other techniques on the basis of accuracy, cost effectiveness, and performance under severe weather conditions.

  19. Book review: Birds of Delaware

    USGS Publications Warehouse

    Peterjohn, Bruce G.

    2001-01-01

    Located along Delaware Bay and the Atlantic coast, the state of Delaware’s significance for bird conservation has been well established for decades. The extensive tidal habitats and marshes bordering Delaware Bay host shorebird and waterbird populations of hemispheric importance, and protecting these populations has become an urgent conservation priority in recent years. Other habitats found in the state vary from barrier beaches to dry coniferous woods on the coastal plain and mesophytic communities along the Piedmont in the north, allowing a diverse avifauna to prosper within a small geographic area. Ornithologists and birders have actively studied birds within the state for more than a century, but surprisingly, no single reference has provided a complete summary of the status and distribution of the state’s birds until publication of the Birds of Delaware.Review info: Birds of Delaware. By Gene K. Hess, Richard L. West, Maurice V. Barnhill III, and Lorraine M. Fleming, 2000. ISBN: 0-8229-4069-8, 635 pp.

  20. Kids Voices Count: Listening to Delaware's Children Talk about Tobacco.

    ERIC Educational Resources Information Center

    Delaware Univ., Newark. Kids Count in Delaware.

    This Kids Count special report examines attitudes of adolescents in Delaware toward smoking and the use of tobacco products. Data are based on interviews with middle and high school students conducted by journalism students at Glasgow High School under the supervision of their teacher, and on statewide data. The report presents statewide data and…

  1. National Environmental/Energy Workforce Assessment for Delaware.

    ERIC Educational Resources Information Center

    National Field Research Center Inc., Iowa City, IA.

    This report presents existing workforce levels, training programs and career potentials and develops staffing level projections (1976-1982) based on available information for the State of Delaware. The study concerns itself with the environmental pollution control areas of air, noise, potable water, pesticides, radiation, solid waste, wastewater,…

  2. Delaware River and Catskill Region Hydrologic Observatory

    NASA Astrophysics Data System (ADS)

    Bain, M. B.; Brutsaert, W. H.; Walter, M. T.; Degaetano, A. T.; Steenhuis, T. S.

    2004-12-01

    This poster presents the nationally unique opportunities for hydrology-based research in the Delaware River and Catskill Mountain (DelCat) Region. The DelCat region encompasses all of the Delaware river Basin and the New York City Catskills' source watersheds. It has been a key water resource region prior to the founding of our country. This mountain-river-estuary hydrologic system together with other watersheds in the Catskills has supported the population and economic growth of major metropolitan areas of the early United States by providing water supply, land and forests, transportation, power generation, fisheries, recreation, and pollution elimination. The presentation is an account of a forthcoming effort designed to elicit support and participation. After greatly expanding the user and research community for the DelCat observatory, we will design the facility to serve a large user base interested in studies on a wide range of basic and applied hydrologic science topics and issues. Our current plans are to define the form of the hydrologic observatory, and to forecast the nature of what hydrologic sciences can achieve in the DelCat Region.

  3. 1. NORTHWEST OBLIQUE AERIAL VIEW OF FORT DELAWARE AND PEA ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. NORTHWEST OBLIQUE AERIAL VIEW OF FORT DELAWARE AND PEA PATCH ISLAND. REMAINS OF SEA WALL VISIBLE IN FOREGROUND AND RIGHT OF IMAGE. - Fort Delaware, Sea Wall, Pea Patch Island, Delaware City, New Castle County, DE

  4. NORTHWEST OBLIQUE AERIAL VIEW OF FORT DELAWARE AND PEA PATCH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    NORTHWEST OBLIQUE AERIAL VIEW OF FORT DELAWARE AND PEA PATCH ISLAND. REMAINS OF SEA WALL VISIBLE IN FOREGROUND AND RIGHT OF IMAGE - Fort Delaware, Pea Patch Island, Delaware City, New Castle County, DE

  5. Kids Count in Delaware: Fact Book, 2000-2001 [and] Families Count in Delaware: Fact Book, 2000-2001.

    ERIC Educational Resources Information Center

    Delaware Univ., Newark. Kids Count in Delaware.

    This Kids Count Fact Book is combined with the Families Count Fact Book to provide information on statewide trends affecting children and families in Delaware. The Kids Count statistical profile is based on 11 main indicators of child well-being: (1) births to teens 15 to 17 years; (2) births to teens 15 to 19 years; (3) low birth weight babies;…

  6. Atomic Force Microscopy Based Cell Shape Index

    NASA Astrophysics Data System (ADS)

    Adia-Nimuwa, Usienemfon; Mujdat Tiryaki, Volkan; Hartz, Steven; Xie, Kan; Ayres, Virginia

    2013-03-01

    Stellation is a measure of cell physiology and pathology for several cell groups including neural, liver and pancreatic cells. In the present work, we compare the results of a conventional two-dimensional shape index study of both atomic force microscopy (AFM) and fluorescent microscopy images with the results obtained using a new three-dimensional AFM-based shape index similar to sphericity index. The stellation of astrocytes is investigated on nanofibrillar scaffolds composed of electrospun polyamide nanofibers that has demonstrated promise for central nervous system (CNS) repair. Recent work by our group has given us the ability to clearly segment the cells from nanofibrillar scaffolds in AFM images. The clear-featured AFM images indicated that the astrocyte processes were longer than previously identified at 24h. It was furthermore shown that cell spreading could vary significantly as a function of environmental parameters, and that AFM images could record these variations. The new three-dimensional AFM-based shape index incorporates the new information: longer stellate processes and cell spreading. The support of NSF PHY-095776 is acknowledged.

  7. University of Delaware Energy Institute

    SciTech Connect

    Klein, Michael T

    2012-09-30

    The main goal of this project funded through this DOE grant is to help in the establishment of the University of Delaware Energy Institute (UDEI) which is designed to be a long-term, on-going project. The broad mission of UDEI is to develop collaborative programs encouraging research activities in the new and emerging energy technologies and to partner with industry and government in meeting the challenges posed by the nation's pressing energy needs.

  8. Lorentz Force Based Satellite Attitude Control

    NASA Astrophysics Data System (ADS)

    Giri, Dipak Kumar; Sinha, Manoranjan

    2016-07-01

    Since the inception of attitude control of a satellite, various active and passive control strategies have been developed. These include using thrusters, momentum wheels, control moment gyros and magnetic torquers. In this present work, a new technique named Lorentz force based Coulombic actuators for the active control is proposed. This method uses electrostatic charged shells, which interact with the time varying earth's magnetic field to establish a full three axes control of the satellite. It is shown that the proposed actuation mechanism is similar to a satellite actuated by magnetic coils except that the resultant magnetic moment vanishes under two different conditions. The equation for the required charges on the the Coulomb shells attached to the satellite body axes is derived, which is in turn used to find the available control torque for actuating the satellite along the orbit. Stability of the proposed system for very high initial angular velocity and exponential stability about the origin are proved for a proportional-differential control input. Simulations are carried out to show the efficacy of the proposed system for the attitude control of the earth-pointing satellite.

  9. 26. "AIR INSTALLATIONS; EDWARDS AIR FORCE BASE, CALIFORNIA; HIGH SPEED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. "AIR INSTALLATIONS; EDWARDS AIR FORCE BASE, CALIFORNIA; HIGH SPEED TEST TRACK." Drawing No. 10-259. One inch to 400 feet plan of original 10,000-foot sled track. No date. No D.O. series number. No headings as above. - Edwards Air Force Base, South Base Sled Track, Edwards Air Force Base, North of Avenue B, between 100th & 140th Streets East, Lancaster, Los Angeles County, CA

  10. Delaware: The State and Its Educational System.

    ERIC Educational Resources Information Center

    Hodgkinson, Harold L.

    Delaware is a good example of the falsity of the old notion that small is simple. Although a small state in terms of population, its social systems and bureaucracies can be complex indeed. Delaware has been unusually popular with American businesses, leading to more Fortune 500 companies being incorporated there than in any other state. The…

  11. 40 CFR 81.308 - Delaware.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 18 2012-07-01 2012-07-01 false Delaware. 81.308 Section 81.308 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Section 107 Attainment Status Designations § 81.308 Delaware. Delaware—TSP Designated area Does not...

  12. Extent and frequency of floods on Delaware River in vicinity of Belvidere, New Jersey

    USGS Publications Warehouse

    Farlekas, George M.

    1966-01-01

    A stream overflowing its banks is a natural phenomenon. This natural phenomenon of flooding has occurred on the Delaware River in the past and will occur in the future. T' o resulting inundation of large areas can cause property damage, business losses and possible loss of life, and may result in emergency costs for protection, rescue, and salvage work. For optimum development of the river valley consistent with the flood risk, an evaluation of flood conditions is necessary. Basic data and the interpretation of the data on the regimen of the streams, particularly the magnitude of floods to be expected, the frequency of their occurrence, and the areas inundated, are essential for planning and development of flood-prone areas.This report presents information relative to the extent, depth, and frequency of floods on the Delaware River and its tributaries in the vicinity of Belvidere, N.J. Flooding on the tributaries detailed in the report pertains only to the effect of backwater from the Delaware River. Data are presented for several past floods with emphasis given to the floods of August 19, 1955 and May 24, 1942. In addition, information is given for a hypothetical flood based on the flood of August 19, 1955 modified by completed (since 1955) and planned flood-control works.By use of relations presented in this report the extent, depth, and frequency of flooding can be estimated for any site along the reach of the Delaware River under study. Flood data and the evaluation of the data are presented so that local and regional agencies, organizations, and individuals may have a technical basis for making decisions on the use of flood-prone areas. The Delaware River Basin Commission and the U.S. Geological Survey regard this program of flood-plain inundation studies as a positive step toward flood-damage prevention. Flood-plain inundation studies, when followed by appropriate land-use regulations, are a valuable and economical supplement to physical works for flood

  13. Force.

    ERIC Educational Resources Information Center

    Gamble, Reed

    1989-01-01

    Discusses pupil misconceptions concerning forces. Summarizes some of Assessment of Performance Unit's findings on meaning of (1) force, (2) force and motion in one dimension and two dimensions, and (3) Newton's second law. (YP)

  14. Atom world based on nano-forces: 25 years of atomic force microscopy.

    PubMed

    Morita, Seizo

    2011-01-01

    Scanning tunneling microscopy (STM) has opened up the new nanoworlds of scanning probe microscopy. STM is the first-generation atomic tool that can image, evaluate and manipulate individual atoms and consequently can create nanostructures by true bottom-up methods based on atom-by-atom manipulation. Atomic force microscopy is a second-generation atomic tool that has followed the footsteps of STM, and which is now opening doors to a new atom world based on using nanoscale forces.

  15. Linear thermal circulator based on Coriolis forces.

    PubMed

    Li, Huanan; Kottos, Tsampikos

    2015-02-01

    We show that the presence of a Coriolis force in a rotating linear lattice imposes a nonreciprocal propagation of the phononic heat carriers. Using this effect we propose the concept of Coriolis linear thermal circulator which can control the circulation of a heat current. A simple model of three coupled harmonic masses on a rotating platform permits us to demonstrate giant circulating rectification effects for moderate values of the angular velocities of the platform.

  16. Chemical character of streams in the Delaware River basin

    USGS Publications Warehouse

    Anderson, Peter W.; McCarthy, Leo T.

    1963-01-01

    The water chemistry of streams in the Delaware River basin falls into eight general groups, when mapped according to the prevalent dissolved-solids content and the predominant ions normally found in the water. The approximate regions representing each of these iso-chemical quality groups are shown on the accompanying base map of the drainage basin.

  17. Separations based on the mechanical forces of light.

    PubMed

    Zhao, Bum Suk; Koo, Yoon-Mo; Chung, Doo Soo

    2006-01-18

    A photon as a particle has an energy and a momentum. In a matter-photon interaction, the matter and photons may exchange their momenta observing the momentum conservation law. The consequence of the momentum transfer from a photon to a matter particle is a mechanical force exerted on the particle. Several separation methods based on this force of light are reviewed. Photophoresis separations for micron-sized particles and optical force chromatography for chemical-sized molecules are discussed.

  18. Acoustic radiation force-based elasticity imaging methods

    PubMed Central

    Palmeri, Mark L.; Nightingale, Kathryn R.

    2011-01-01

    Conventional diagnostic ultrasound images portray differences in the acoustic properties of soft tissues, whereas ultrasound-based elasticity images portray differences in the elastic properties of soft tissues (i.e. stiffness, viscosity). The benefit of elasticity imaging lies in the fact that many soft tissues can share similar ultrasonic echogenicities, but may have different mechanical properties that can be used to clearly visualize normal anatomy and delineate pathological lesions. Acoustic radiation force-based elasticity imaging methods use acoustic radiation force to transiently deform soft tissues, and the dynamic displacement response of those tissues is measured ultrasonically and is used to estimate the tissue's mechanical properties. Both qualitative images and quantitative elasticity metrics can be reconstructed from these measured data, providing complimentary information to both diagnose and longitudinally monitor disease progression. Recently, acoustic radiation force-based elasticity imaging techniques have moved from the laboratory to the clinical setting, where clinicians are beginning to characterize tissue stiffness as a diagnostic metric, and commercial implementations of radiation force-based ultrasonic elasticity imaging are beginning to appear on the commercial market. This article provides an overview of acoustic radiation force-based elasticity imaging, including a review of the relevant soft tissue material properties, a review of radiation force-based methods that have been proposed for elasticity imaging, and a discussion of current research and commercial realizations of radiation force based-elasticity imaging technologies. PMID:22419986

  19. Information-based physics, influence, and forces

    SciTech Connect

    Walsh, James Lyons; Knuth, Kevin H.

    2015-01-13

    In recent works, Knuth and Bahreyni have demonstrated that the concepts of space and time are emergent in a coarse-grained model of direct particle-particle influence. In addition, Knuth demonstrated that observer-made inferences regarding the free particle, which is defined as a particle that influences others, but is not itself influenced, result in a situation identical to the Feynman checkerboard model of the Dirac equation. This suggests that the same theoretical framework that gives rise to an emergent spacetime is consistent with quantum mechanics. In this paper, we begin to explore the effect of influence on the emergent properties of a particle. This initial study suggests that when a particle is influenced, it is interpreted as accelerating in a manner consistent with special relativity implying that, at least in this situation, influence can be conceived of as a force.

  20. Mobile Quarantine Facility unloaded at Ellington Air Force Base, Texas

    NASA Technical Reports Server (NTRS)

    1969-01-01

    A Mobile Quarantine Facility, with the three Apollo 11 crewmen inside, is unloaded from a U.S. Air Force C141 transport at Ellington Air Force Base early Sunday after a flight from Hawaii. A large crowd was present to welcome Astronauts Neil Armstrong, Michael Collins and Edwin Aldrin Jr. back to Houston following their historic lunar landing mission.

  1. Viscoelastic mechanical behavior of soft microcantilever-based force sensors

    NASA Astrophysics Data System (ADS)

    Lin, I.-Kuan; Liao, Yen-Ming; Liu, Yan; Ou, Kuang-Shun; Chen, Kuo-Shen; Zhang, Xin

    2008-12-01

    Polydimethylsiloxane (PDMS) microcantilevers have been used as force sensors for studying cellular mechanics by converting their displacements to cellular mechanical forces. However, PDMS is an inherently viscoelastic material and its elastic modulus changes with loading rates and elapsed time. Therefore, the traditional approach to calculating cellular mechanical forces based on elastic mechanics can result in errors. This letter reports a more in-depth method for viscoelastic characterization, modeling, and analysis associated with the bending behavior of the PDMS microcantilevers. A viscoelastic force conversion model was developed and validated by proof-of-principle bending tests.

  2. An ABS control logic based on wheel force measurement

    NASA Astrophysics Data System (ADS)

    Capra, D.; Galvagno, E.; Ondrak, V.; van Leeuwen, B.; Vigliani, A.

    2012-12-01

    The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre-road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force. The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficient.

  3. 40 CFR 81.308 - Delaware.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AREAS FOR AIR QUALITY PLANNING PURPOSES Section 107 Attainment Status Designations § 81.308 Delaware... classified Better than national standards City of Wilmington X Section within City of Newark bounded...

  4. 40 CFR 81.308 - Delaware.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AREAS FOR AIR QUALITY PLANNING PURPOSES Section 107 Attainment Status Designations § 81.308 Delaware... classified Better than national standards City of Wilmington X Section within City of Newark bounded...

  5. Offutt Air Force Base, Looking Glass Airborne Command Post, Hydraulic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Offutt Air Force Base, Looking Glass Airborne Command Post, Hydraulic Fluid Buildings, Northeast of Looking Glass Avenue at southwest side of Project Looking Glass Historic District, Bellevue, Sarpy County, NE

  6. Interior view Beale Air Force Base, Perimeter Acquisition Vehicle ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Satellite Communications Terminal, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  7. Interior, looking northwest Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, looking northwest - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Civil Engineering Storage Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  8. Exterior, looking west Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior, looking west - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Civil Engineering Storage Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  9. Space chimp Enos returns to Patrick Air Force Base

    NASA Technical Reports Server (NTRS)

    1961-01-01

    Enos the chimpanzee that orbited the earth twice in a Mercury spacecraft arrives back at Patrick Air Force Base. Enos landed some 220 nautical miles south of Bermuda and was picked up up by the U.S.S. Stormes.

  10. Interior, looking northeast Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, looking northeast - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Clean Lubrication Oil Storage Tank & Enclosure, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  11. Exterior, looking west Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior, looking west - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Clean Lubrication Oil Storage Tank & Enclosure, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  12. GENERAL SITE PLAN, HAMILTON AIR FORCE BASE, MARIN COUNTY, CALIFORNIA. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GENERAL SITE PLAN, HAMILTON AIR FORCE BASE, MARIN COUNTY, CALIFORNIA. Pencil on paper, dated December 4, 1952. Also marked "PWC 103474." By J.Y. Long Company, Engineers, Oakland, California - Hamilton Field, East of Nave Drive, Novato, Marin County, CA

  13. General view. View to southwest Offutt Air Force Base, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    General view. View to southwest - Offutt Air Force Base, Looking Glass Airborne Command Post, Vehicle Refueling Station, Northeast of AGE Storage Facility at far northwest end of Project Looking Glass Historic District, Bellevue, Sarpy County, NE

  14. Offutt Air Force Base, Looking Glass Airborne Command Post, Vehicle ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Offutt Air Force Base, Looking Glass Airborne Command Post, Vehicle Refueling Station, Northeast of AGE Storage Facility at far northwest end of Project Looking Glass Historic District, Bellevue, Sarpy County, NE

  15. Interior Beale Air Force Base, Perimeter Acquisition Vehicle Entry ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Gate House, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  16. Interior, looking northeast Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, looking northeast - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Microwave Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  17. Looking north Beale Air Force Base, Perimeter Acquisition Vehicle ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking north - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Electric Substation, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  18. Interior, looking northeast Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, looking northeast - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Emergency Generator Enclosure, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  19. Missile Warning Operations Center (MWOC) Beale Air Force Base, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Missile Warning Operations Center (MWOC) - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  20. Interior, looking southeast Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, looking southeast - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Supply Warehouse, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  1. Exterior, looking west Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior, looking west - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Guard Tower, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  2. Interior, looking west Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, looking west - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Guard Tower, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  3. Exterior, looking north Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior, looking north - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Supply Warehouse, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  4. Highbay Generator Room, looking northwest Beale Air Force Base, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Highbay Generator Room, looking northwest - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Power Plant, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  5. Exterior, detail, looking west Beale Air Force Base, Perimeter ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior, detail, looking west - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Power Plant, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  6. Exterior, looking southwest Beale Air Force Base, Perimeter Acquisition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior, looking southwest - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Emergency Generator Enclosure, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  7. Southeast New Mexico. Methanol foam fracs open up Delaware

    SciTech Connect

    Mickey, V.

    1983-10-01

    Part of the recent success in Brushy Canyon, Cherry Canyon, and Delaware formations in SE. New Mexico is being attributed to improved stimulation techniques. Historically, fracturing Delaware-age sands caused water sensitive clays within the formation to swell. Methanol foam fracs have been applied in Delaware-aged formations for the past year, and results are encouraging. Well potentials have been improved on some wells from under 10 bopd after acidization to 100 bopd after stimulation with methanol in nitrogen foam. The wells are cleaned up after perforation with 7.5% iron and clay control acid. Then the well is stimulated with a 75-quality nitrogen foam. The remaining 25% of the fluid is 50% methanol and 50% KCl water, 2% or 3% concentration. Additives required are minor, and typically include 1 gal/1,000/gal of some nonemulsifying agent and a special methanol foamer. The base fluid is a 30-lb gel system which gives stability to the foam and improves the foam's sand transport qualities. The gel also reduces friction pressures.

  8. Derivation of Delaware Bay tidal parameters from space shuttle photography

    SciTech Connect

    Zheng, Quanan; Yan, Xiaohai; Klemas, V. )

    1993-06-01

    The tide-related parameters of the Delaware Bay are derived from space shuttle time-series photographs. The water areas in the bay are measured from interpretation maps of the photographs with a CALCOMP 9100 digitizer and ERDAS Image Processing System. The corresponding tidal levels are calculated using the exposure time annotated on the photographs. From these data, an approximate function relating the water area to the tidal level at a reference point is determined. Based on the function, the water areas of the Delaware Bay at mean high water (MHW) and mean low water (MLW), below 0 m, and for the tidal zone are inferred. With MHW and MLW areas and the mean tidal range, the authors calculate the tidal influx of the Delaware Bay, which is 2.76 x 1O[sup 9] m[sup 3]. Furthermore, the velocity of flood tide at the bay mouth is determined using the tidal flux and an integral of the velocity distribution function at the cross section between Cape Henlopen and Cape May. The result is 132 cm/s, which compares well with the data on tidal current charts.

  9. 78 FR 14060 - Television Broadcasting Services; Seaford, Delaware and Dover, Delaware

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-04

    ... COMMISSION 47 CFR Part 73 Television Broadcasting Services; Seaford, Delaware and Dover, Delaware AGENCY... and seeks a waiver of the Commission's freeze on the filing of petitions for rulemaking by televisions... with its first local television service, and that Seaford will remain well-served after the...

  10. Force-rebalanced Lorentz force magnetometer based on a micromachined oscillator

    NASA Astrophysics Data System (ADS)

    Sonmezoglu, S.; Li, M.; Horsley, D. A.

    2015-03-01

    This paper presents a 3-axis Lorentz force magnetometer based on an encapsulated micromechanical silicon resonator having three orthogonal vibration modes, each measuring one vector component of the external magnetic field. One mode, with natural frequency (fn) of 46.973 kHz and quality factor (Q) of 14 918, is operated as a closed-loop electrostatically excited oscillator to provide a frequency reference for 3-axis sensing and Lorentz force generation. Current, modulated at the reference frequency, is injected into the resonator, producing Lorentz force that is centered at the reference frequency. Lorentz force in the first axis is nulled by the oscillator loop, resulting in force-rebalanced operation. The bandwidth and scale-factor of this force-rebalanced axis are independent of resonator Q, improving the sensor's temperature coefficient from 20 841 ppm/ °C to 424 ppm/ °C. The frequencies of the other two modes are closely spaced to the first mode's reference frequency and are demonstrated to track this frequency over temperature within 1 ppm/K. Field measurements in these two axes are conducted open-loop and off-resonance, ensuring that the scale-factor is independent of Q to first order and producing a measurement bandwidth of over 40 Hz.

  11. Vehicle lateral state estimation based on measured tyre forces.

    PubMed

    Tuononen, Ari J

    2009-01-01

    Future active safety systems need more accurate information about the state of vehicles. This article proposes a method to evaluate the lateral state of a vehicle based on measured tyre forces. The tyre forces of two tyres are estimated from optically measured tyre carcass deflections and transmitted wirelessly to the vehicle body. The two remaining tyres are so-called virtual tyre sensors, the forces of which are calculated from the real tyre sensor estimates. The Kalman filter estimator for lateral vehicle state based on measured tyre forces is presented, together with a simple method to define adaptive measurement error covariance depending on the driving condition of the vehicle. The estimated yaw rate and lateral velocity are compared with the validation sensor measurements. PMID:22291535

  12. Vehicle Lateral State Estimation Based on Measured Tyre Forces

    PubMed Central

    Tuononen, Ari J.

    2009-01-01

    Future active safety systems need more accurate information about the state of vehicles. This article proposes a method to evaluate the lateral state of a vehicle based on measured tyre forces. The tyre forces of two tyres are estimated from optically measured tyre carcass deflections and transmitted wirelessly to the vehicle body. The two remaining tyres are so-called virtual tyre sensors, the forces of which are calculated from the real tyre sensor estimates. The Kalman filter estimator for lateral vehicle state based on measured tyre forces is presented, together with a simple method to define adaptive measurement error covariance depending on the driving condition of the vehicle. The estimated yaw rate and lateral velocity are compared with the validation sensor measurements. PMID:22291535

  13. 5. ISLAND ROAD BRIDGE. COLWYN, DELAWARE CO., PA. Sec. 1101, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. ISLAND ROAD BRIDGE. COLWYN, DELAWARE CO., PA. Sec. 1101, MP 5.58. - Northeast Railroad Corridor, Amtrak route between Delaware-Pennsylvania & Pennsylvania-New Jersey state lines, Philadelphia, Philadelphia County, PA

  14. 4. COBBS CREEK BRIDGE. COLWYN, DELAWARE CO., PA. Sec. 1101, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. COBBS CREEK BRIDGE. COLWYN, DELAWARE CO., PA. Sec. 1101, MP 5.73 - Northeast Railroad Corridor, Amtrak route between Delaware-Pennsylvania & Pennsylvania-New Jersey state lines, Philadelphia, Philadelphia County, PA

  15. Toward Standardized Acoustic Radiation Force (ARF)-Based Ultrasound Elasticity Measurements With Robotic Force Control

    PubMed Central

    Kumar, Shalki; Lily, Kuo; Sen, H. Tutkun; Iordachita, Iulian; Kazanzides, Peter

    2016-01-01

    Objective Acoustic radiation force (ARF)-based approaches to measure tissue elasticity require transmission of a focused high-energy acoustic pulse from a stationary ultrasound probe and ultrasound-based tracking of the resulting tissue displacements to obtain stiffness images or shear wave speed estimates. The method has established benefits in biomedical applications such as tumor detection and tissue fibrosis staging. One limitation, however, is the dependence on applied probe pressure, which is difficult to control manually and prohibits standardization of quantitative measurements. To overcome this limitation, we built a robot prototype that controls probe contact forces for shear wave speed quantification. Methods The robot was evaluated with controlled force increments applied to a tissue-mimicking phantom and in vivo abdominal tissue from three human volunteers. Results The root-mean-square error between the desired and measured forces was 0.07 N in the phantom and higher for the fatty layer of in vivo abdominal tissue. The mean shear wave speeds increased from 3.7 to 4.5 m/s in the phantom and 1.0 to 3.0 m/s in the in vivo fat for compressive forces ranging from 2.5 to 30 N. The standard deviation of shear wave speeds obtained with the robotic approach were low in most cases (< 0.2 m/s) and comparable to that obtained with a semiquantitative landmark-based method. Conclusion Results are promising for the introduction of robotic systems to control the applied probe pressure for ARF-based measurements of tissue elasticity. Significance This approach has potential benefits in longitudinal studies of disease progression, comparative studies between patients, and large-scale multidimensional elasticity imaging. PMID:26552071

  16. 33 CFR 162.40 - Inland waterway from Delaware River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... section in 33 CFR part 207. ... River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal). 162.40 Section 162.40 Navigation... Bay, Del. and Md. (Chesapeake and Delaware Canal). (a) Applicability. The regulations in this...

  17. Delaware County Community College Business and International Education Program.

    ERIC Educational Resources Information Center

    Delaware County Community Coll., Media, PA.

    In 1987, Delaware County Community College (DCCC) initiated the Delaware Valley Trade Enhancement Project, comprising a number of activities to promote the involvement of local firms in international trade. One of the first activities of the Delaware Valley Trade Enhancement project was a survey of over 6,000 small and medium-sized businesses in…

  18. Mapping of surface-immobilized DNA with force-based atomic force microscopy.

    PubMed

    Lee, Yoonhee; Kwon, Sung Hong; Kim, Youngkyu; Lee, Jong-Bong; Park, Joon Won

    2013-04-16

    Single-stranded 50-mer, 100-mer, and 150-mer DNAs were immobilized on a surface, and force-based atomic force microscopy (AFM) was employed to examine their behavior. A complementary 20-mer probe DNA on an AFM tip was used for the measurements. High-resolution maps were generated, and relevant parameters, including the force, stretching distance, unbinding probability, cluster size, and degree of distortion, were analyzed. Due to thermal drift, the cluster shape became increasingly distorted as the scan speed was decreased and as the map area was reduced. The cluster radius increased with the number of base (N), and the radius was proportional to N(0.6) (r = 0.977) and N(0.53) (r = 0.991). Due to the effect of the pulling angle, the apparent values of the stretching distance and the unbinding force decreased as the AFM probe was moved away from the center position; these values can be described as a function of sin θ.

  19. Micro-Vibration-Based Slip Detection in Tactile Force Sensors

    PubMed Central

    Fernandez, Raul; Payo, Ismael; Vazquez, Andres S.; Becedas, Jonathan

    2014-01-01

    Tactile sensing provides critical information, such as force, texture, shape or temperature, in manipulation tasks. In particular, tactile sensors traditionally used in robotics are emphasized in contact force determination for grasping control and object recognition. Nevertheless, slip detection is also crucial to successfully manipulate an object. Several approaches have appeared to detect slipping, the majority being a combination of complex sensors with complex algorithms. In this paper, we deal with simplicity, analyzing how a novel, but simple, algorithm, based on micro-vibration detection, can be used in a simple, but low-cost and durable, force sensor. We also analyze the results of using the same principle to detect slipping in other force sensors based on flexible parts. In particular, we show and compare the slip detection with: (i) a flexible finger, designed by the authors, acting as a force sensor; (ii) the finger torque sensor of a commercial robotic hand; (iii) a commercial six-axis force sensor mounted on the wrist of a robot; and (iv) a fingertip piezoresistive matrix sensor. PMID:24394598

  20. AFM-based force microsensor for a microrobot

    NASA Astrophysics Data System (ADS)

    Fatikow, Sergej; Fahlbusch, Stephan

    2001-10-01

    Microrobots are the result of increasing research activities at the border between microsystem technology and robotics. Today already, robots with dimensions of a few cubic- centimeters can be developed. Like conventional robots, microrobots represent a complex system that usually contains several different types of actuators and sensors. The measurement of gripping forces is the most important sensor application in micromanipulation besides visual servoing to protect the parts from too high surface pressures and thereby damage during the assembly process. Very small forces in the range of 200 (mu) N down to 0.1 (mu) N or even less have to be sensed. Thus, the aim of our current research activities is the development of a high-resolution integrated force microsensor for measuring gripping forces in a microhandling robot. On the one hand, the sensor should be a device for teleoperated manipulation tasks in a flexible microhandling station. On the other hand, typical microhandling operations should to a large extend be automated with the aid of computer-based signal processing of sensor information. The user should be provided with an interface for teleoperated manipulation and an interface for partially automated manipulation of microobjects. In this paper, a concept for the measurement of gripping forces in microrobotics using piezoresistive AFM (atomic force microscope) cantilevers is introduced. Further on, the concept of a microrobot-based SEM station and its applications are presented.

  1. Micro-vibration-based slip detection in tactile force sensors.

    PubMed

    Fernandez, Raul; Payo, Ismael; Vazquez, Andres S; Becedas, Jonathan

    2014-01-03

    Tactile sensing provides critical information, such as force, texture, shape or temperature, in manipulation tasks. In particular, tactile sensors traditionally used in robotics are emphasized in contact force determination for grasping control and object recognition. Nevertheless, slip detection is also crucial to successfully manipulate an object. Several approaches have appeared to detect slipping, the majority being a combination of complex sensors with complex algorithms. In this paper, we deal with simplicity, analyzing how a novel, but simple, algorithm, based on micro-vibration detection, can be used in a simple, but low-cost and durable, force sensor. We also analyze the results of using the same principle to detect slipping in other force sensors based on flexible parts. In particular, we show and compare the slip detection with: (i) a flexible finger, designed by the authors, acting as a force sensor; (ii) the finger torque sensor of a commercial robotic hand; (iii) a commercial six-axis force sensor mounted on the wrist of a robot; and (iv) a fingertip piezoresistive matrix sensor.

  2. GPI based velocity/force observer design for robot manipulators.

    PubMed

    Gutiérrez-Giles, Alejandro; Arteaga-Pérez, Marco A

    2014-07-01

    In many applications involving a robot in contact with a surface it is important to control the interaction between the manipulator and its environment, usually by employing force sensors. However, sometimes it is desirable to remove them due to a variety of reasons, e.g. high costs, noisy measurements and a narrow bandwidth. To overcome these drawbacks, in this work it is proposed as a velocity/force observer based on the Generalized Proportional Integral (GPI) technique. Joint velocities and contact forces are estimated with only position measurements and then used in a force/position control scheme. Ultimate boundedness of the observation errors is formally proven and an arbitrarily small ultimate bound is then achieved. Simulation results are used to validate the proposed approach.

  3. GPI based velocity/force observer design for robot manipulators.

    PubMed

    Gutiérrez-Giles, Alejandro; Arteaga-Pérez, Marco A

    2014-07-01

    In many applications involving a robot in contact with a surface it is important to control the interaction between the manipulator and its environment, usually by employing force sensors. However, sometimes it is desirable to remove them due to a variety of reasons, e.g. high costs, noisy measurements and a narrow bandwidth. To overcome these drawbacks, in this work it is proposed as a velocity/force observer based on the Generalized Proportional Integral (GPI) technique. Joint velocities and contact forces are estimated with only position measurements and then used in a force/position control scheme. Ultimate boundedness of the observation errors is formally proven and an arbitrarily small ultimate bound is then achieved. Simulation results are used to validate the proposed approach. PMID:24780160

  4. 33 CFR 207.100 - Inland waterway from Delaware River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal); use, administration, and... Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal); use, administration, and navigation. (a... River to Chesapeake Bay, Del. and Md., between Reedy Point, Delaware River, and Old Town Point...

  5. 33 CFR 207.100 - Inland waterway from Delaware River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal); use, administration, and... Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal); use, administration, and navigation. (a... River to Chesapeake Bay, Del. and Md., between Reedy Point, Delaware River, and Old Town Point...

  6. 33 CFR 207.100 - Inland waterway from Delaware River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal); use, administration, and... Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal); use, administration, and navigation. (a... River to Chesapeake Bay, Del. and Md., between Reedy Point, Delaware River, and Old Town Point...

  7. Utility Building Plan, elevations and sections. March Air Force Base, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Utility Building Plan, elevations and sections. March Air Force Base, Riverside, California, COmbat Operations Center, Utility Building. By Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 57, approved March, 1962; specifications no. ENG-04-353-62-66; D.O. series AW 1596/57, Rev. "B"; file drawer 1290. Last revised 3 October 1966 "drawings updated." Various scales. 29 x 41 inches. pencil on paper - March Air Force Base, Strategic Air Command, Utility Building, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

  8. Ab Initio Force Fields for Imidazolium-Based Ionic Liquids.

    PubMed

    McDaniel, Jesse G; Choi, Eunsong; Son, Chang Yun; Schmidt, J R; Yethiraj, Arun

    2016-07-21

    We develop ab initio force fields for alkylimidazolium-based ionic liquids (ILs) that predict the density, heats of vaporization, diffusion, and conductivity that are in semiquantitative agreement with experimental data. These predictions are useful in light of the scarcity of and sometimes inconsistency in experimental heats of vaporization and diffusion coefficients. We illuminate physical trends in the liquid cohesive energy with cation chain length and anion. These trends are different than those based on the experimental heats of vaporization. Molecular dynamics prediction of the room temperature dynamics of such ILs is more difficult than is generally realized in the literature due to large statistical uncertainties and sensitivity to subtle force field details. We believe that our developed force fields will be useful for correctly determining the physics responsible for the structure/property relationships in neat ILs.

  9. Detection and Prediction of the Delaware Summertime Sea/Bay Breeze

    NASA Astrophysics Data System (ADS)

    Veron, D. E.; Hughes, C.

    2011-12-01

    The Delaware Bay/Sea Breeze is a thermally driven coastal circulation that has significant impacts along Delaware's coastline. The passage of a sea breeze front has a cooling effect which often moderates summer heat. Pollutants can be transported by a sea breeze circulation affecting air quality. In addition, this frequently occurring local circulation is strong enough and of enough vertical and horizontal extent to effect offshore wind turbines. The potential moderation of weather, air quality, and offshore wind resource all have significant environmental and economic impacts which are important to a coastal population which has nearly doubled in the last two decades. An analysis of weather radar (NEXRAD) images is used as an initial method for detecting a sea/bay breeze front. These case study days are then used to develop an objective sea breeze detection scheme based on changes in the observed conditions at twenty-one meteorological stations run by the Delaware Environmental Observing System and the National Data Buoy Center. Three distinct classes of sea breeze circulation (classic, dew-point and weak) are derived based on location, penetration distance, temperature drop, and time of onset. In general, based on nine years of data from 2000 to 2009, sea/bay breezes along the Delaware coast are found to occur in the summer 63% of the time at coastal stations and 20% at inland stations. These same data are used to develop a local sea breeze prediction scheme for the Delaware ocean coast. Details of the return flow and structure of the sea breeze at high spatial and temporal resolution are investigated using a regional atmospheric model, WRF. Characterization of Delaware's sea/bay breezes using multiple data sources and locations creates a more complete understating of the impact of this low-level circulation on the local climate, and will be useful in understanding how things may change in the future as local land-use and global climate changes.

  10. The Campus-Based Formula. NASFAA Task Force Report

    ERIC Educational Resources Information Center

    National Association of Student Financial Aid Administrators, 2014

    2014-01-01

    The primary purpose of the National Association of Student Financial Aid Administrators (NASFAA) Campus-Based Aid Allocation Task Force was to examine the formula by which congressional appropriations for the Federal Supplemental Educational Opportunity Grant (FSEOG), Federal Work-Study (FWS), and Perkins Loan programs are distributed to schools,…

  11. STS-66 landing at Edwards Air Force Base

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The drag chute is fully deployed as the Space Shuttle Atlantis heads toward a stop at Edwards Air Force Base in southern California, ending a successful 10 day, 22 hour and 34 minute space mission. Landing occured at 7:34 a.m. (PST), November 14, 1994.

  12. STS-66 landing at Edwards Air Force Base

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The main landing gear is on the ground and the nose gear is about to touch down as the Space Shuttle Atlantis heads toward a stop at Edwards Air Force Base in southern California, ending a successful 10 day, 22 hour and 34 minute space mission. Landing occured at 7:34 a.m. (PST), November 14, 1994.

  13. STS-67 landing at Edwards Air Force Base

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The drag chute is fully deployed in this view of the Space Shuttle Endeavour as it completes a mission of almost 17 days duration in space on runway 22 at Edwards Air Force Base in southern California. Landing occurred at 1:46 p.m. (EST), March 18, 1995.

  14. STS-67 landing at Edwards Air Force Base

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The Space Shuttle Endeavour, after completing a mission of almost 17 days duration in space, touches down on runway 22 at Edwards Air Force Base in southern California. Landing occurred at 1:46 p.m. (EST), March 18, 1995. In this photo the nose gear is still in the air as the orbiter touches down.

  15. 33 CFR 165.511 - Security Zone; Atlantic Ocean, Chesapeake & Delaware Canal, Delaware Bay, Delaware River and its...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... escorted passenger vessels in the Captain of the Port, Delaware Bay zone as defined in 33 CFR 3.25-05. (b... vessel in order to ensure safe passage in accordance with the Navigation Rules as seen in 33 CFR chapter... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Security Zone; Atlantic...

  16. 33 CFR 165.511 - Security Zone; Atlantic Ocean, Chesapeake & Delaware Canal, Delaware Bay, Delaware River and its...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... escorted passenger vessels in the Captain of the Port, Delaware Bay zone as defined in 33 CFR 3.25-05. (b... vessel in order to ensure safe passage in accordance with the Navigation Rules as seen in 33 CFR chapter... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Security Zone; Atlantic...

  17. 33 CFR 165.511 - Security Zone; Atlantic Ocean, Chesapeake & Delaware Canal, Delaware Bay, Delaware River and its...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... escorted passenger vessels in the Captain of the Port, Delaware Bay zone as defined in 33 CFR 3.25-05. (b... vessel in order to ensure safe passage in accordance with the Navigation Rules as seen in 33 CFR chapter... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Security Zone; Atlantic...

  18. 33 CFR 165.511 - Security Zone; Atlantic Ocean, Chesapeake & Delaware Canal, Delaware Bay, Delaware River and its...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... escorted passenger vessels in the Captain of the Port, Delaware Bay zone as defined in 33 CFR 3.25-05. (b... vessel in order to ensure safe passage in accordance with the Navigation Rules as seen in 33 CFR chapter... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Security Zone; Atlantic...

  19. 33 CFR 165.511 - Security Zone; Atlantic Ocean, Chesapeake & Delaware Canal, Delaware Bay, Delaware River and its...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... escorted passenger vessels in the Captain of the Port, Delaware Bay zone as defined in 33 CFR 3.25-05. (b... vessel in order to ensure safe passage in accordance with the Navigation Rules as seen in 33 CFR chapter... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zone; Atlantic...

  20. Model based control of dynamic atomic force microscope

    SciTech Connect

    Lee, Chibum; Salapaka, Srinivasa M.

    2015-04-15

    A model-based robust control approach is proposed that significantly improves imaging bandwidth for the dynamic mode atomic force microscopy. A model for cantilever oscillation amplitude and phase dynamics is derived and used for the control design. In particular, the control design is based on a linearized model and robust H{sub ∞} control theory. This design yields a significant improvement when compared to the conventional proportional-integral designs and verified by experiments.

  1. Model based control of dynamic atomic force microscope.

    PubMed

    Lee, Chibum; Salapaka, Srinivasa M

    2015-04-01

    A model-based robust control approach is proposed that significantly improves imaging bandwidth for the dynamic mode atomic force microscopy. A model for cantilever oscillation amplitude and phase dynamics is derived and used for the control design. In particular, the control design is based on a linearized model and robust H(∞) control theory. This design yields a significant improvement when compared to the conventional proportional-integral designs and verified by experiments.

  2. Geothermal-resource verification for Air Force bases

    SciTech Connect

    Grant, P.R. Jr.

    1981-06-01

    This report summarizes the various types of geothermal energy reviews some legal uncertainties of the resource and then describes a methodology to evaluate geothermal resources for applications to US Air Force bases. Estimates suggest that exploration costs will be $50,000 to $300,000, which, if favorable, would lead to drilling a $500,000 exploration well. Successful identification and development of a geothermal resource could provide all base, fixed system needs with an inexpensive, renewable energy source.

  3. A Laboratory Safety Program at Delaware.

    ERIC Educational Resources Information Center

    Whitmyre, George; Sandler, Stanley I.

    1986-01-01

    Describes a laboratory safety program at the University of Delaware. Includes a history of the program's development, along with standard safety training and inspections now being implemented. Outlines a two-day laboratory safety course given to all graduate students and staff in chemical engineering. (TW)

  4. Subgroup Achievement and Gap Trends: Delaware

    ERIC Educational Resources Information Center

    Center on Education Policy, 2010

    2010-01-01

    In grade 8 (the only grade in which subgroup trends were analyzed by achievement level), Delaware students showed consistent gains in math at the basic, proficient, and advanced levels for racial/ethnic subgroups, low income students, and boys and girls. There were mixed results in reading. Achievement gaps narrowed in both reading and math in…

  5. Results of the 1975 Delaware PLATO Project.

    ERIC Educational Resources Information Center

    Hofstetter, Fred T.

    During the Spring semester of 1975, the University of Delaware initiated a PLATO project with the dual purpose of demonstrating how a computer system might function in a university and of evaluating what part such a system might play in the future of the university and its supporting community. The demonstration phase of the project, which…

  6. The Geology of Delaware Coastal Environments.

    ERIC Educational Resources Information Center

    Lewis, Robert E.

    This teachers' manual provides model classroom lessons in earth science. It is specially designed to be used with John C. Kraft's A GUIDE TO THE GEOLOGY OF DELAWARE'S COASTAL ENVIRONMENT. The lessons suggest an approach for using the guide in the science classroom and in field studies. The manual can be used as a complete unit, or individual…

  7. U. of Delaware Abandons Sessions on Diversity

    ERIC Educational Resources Information Center

    Hoover, Eric

    2007-01-01

    The University of Delaware spent years refining its residence-life education program. One week of public criticism unraveled it. Late last month, the Foundation for Individual Rights in Education, a free-speech group, accused the university of promoting specific views on race, sexuality, and morality in a series of discussions held in dormitories.…

  8. 33 CFR 117.716 - Delaware River.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... railroad bridge, after the signal to open is given. (c) The owners of drawbridges shall provide and keep in... requirements apply to all drawbridges across the Delaware River: (a) The draws of railroad bridges need not be opened when there is a train in the bridge block approaching the bridge with the intention of...

  9. 76 FR 63700 - Delaware Disaster #DE-00010

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-13

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION Delaware Disaster DE-00010 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a Notice of the Presidential declaration of a major disaster for Public Assistance Only for...

  10. 40 CFR 81.308 - Delaware.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AREAS FOR AIR QUALITY PLANNING PURPOSES Section 107 Attainment Status Designations § 81.308 Delaware... classified Better than national standards City of Wilmington X Section within City of Newark bounded by...-Wilmington-Atlantic City, PA-NJ-MD-DE: 2 New Castle County Nonattainment Marginal. Seaford: 2 Sussex...

  11. 40 CFR 81.308 - Delaware.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AREAS FOR AIR QUALITY PLANNING PURPOSES Section 107 Attainment Status Designations § 81.308 Delaware... classified Better than national standards City of Wilmington X Section within City of Newark bounded by... Type Classification Date 1 Type Philadelphia-Wilmington-Atlantic City, PA-NJ-MD-DE: 2 New Castle...

  12. State Teacher Policy Yearbook, 2009. Delaware

    ERIC Educational Resources Information Center

    National Council on Teacher Quality, 2009

    2009-01-01

    The Delaware edition of the National Council on Teacher Quality's (NCTQ's) 2009 "State Teacher Policy Yearbook" is the third annual look at state policies impacting the teaching profession. It is hoped that this report will help focus attention on areas where state policymakers can make changes that will have a positive impact on teacher quality…

  13. 36 CFR 7.71 - Delaware Water Gap National Recreation Area.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Recreation Area. 7.71 Section 7.71 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF... Recreation Area. (a) (b) Designated snowmobile routes. (1) A route in Middle Smithfield Township, Monroe... within the Delaware Water Gap National Recreation Area: (i) Those operated by businesses based within...

  14. 36 CFR 7.71 - Delaware Water Gap National Recreation Area.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Recreation Area. 7.71 Section 7.71 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF... Recreation Area. (a) (b) Designated snowmobile routes. (1) A route in Middle Smithfield Township, Monroe... within the Delaware Water Gap National Recreation Area: (i) Those operated by businesses based within...

  15. 36 CFR 7.71 - Delaware Water Gap National Recreation Area.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Recreation Area. 7.71 Section 7.71 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF... Recreation Area. (a) (b) Designated snowmobile routes. (1) A route in Middle Smithfield Township, Monroe... within the Delaware Water Gap National Recreation Area: (i) Those operated by businesses based within...

  16. 36 CFR 7.71 - Delaware Water Gap National Recreation Area.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Recreation Area. 7.71 Section 7.71 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF... Recreation Area. (a) (b) Designated snowmobile routes. (1) A route in Middle Smithfield Township, Monroe... within the Delaware Water Gap National Recreation Area: (i) Those operated by businesses based within...

  17. 36 CFR 7.71 - Delaware Water Gap National Recreation Area.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Recreation Area. 7.71 Section 7.71 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF... Recreation Area. (a) (b) Designated snowmobile routes. (1) A route in Middle Smithfield Township, Monroe... within the Delaware Water Gap National Recreation Area: (i) Those operated by businesses based within...

  18. Delaware Stars for Early Success. QRS Profile. The Child Care Quality Rating System (QRS) Assessment

    ERIC Educational Resources Information Center

    Child Trends, 2010

    2010-01-01

    This paper presents a profile of Delaware's Stars for Early Success prepared as part of the Child Care Quality Rating System (QRS) Assessment Study. The profile consists of several sections and their corresponding descriptions including: (1) Program Information; (2) Rating Details; (3) Quality Indicators for Center-Based Programs; (4) Indicators…

  19. Eielson Air Force Base Operable Unit 2 baseline risk assessment

    SciTech Connect

    Lewis, R.E.; Jarvis, T.T.; Jarvis, M.R.; Whelan, G.

    1994-10-01

    Operable Unit 2 at Eielson Air Force Base (AFB) near Fairbanks, is one of several operable units characterized by petroleum, oil, and lubricant contamination, and by the presence of organic products floating at the water table, as a result of Air Force operations since the 1940s. The base is approximately 19,270 acres in size, and comprises the areas for military operations and a residential neighborhood for military dependents. Within Operable Unit 2, there are seven source areas. These source areas were grouped together primarily because of the contaminants released and hence are not necessarily in geographical proximity. Source area ST10 includes a surface water body (Hardfill Lake) next to a fuel spill area. The primary constituents of concern for human health include benzene, toluene, ethylbenzene, and xylenes (BTEX). Monitored data showed these volatile constituents to be present in groundwater wells. The data also showed an elevated level of trace metals in groundwater.

  20. Elevations. March Air Force Base, Riverside, California, Combat Operations Center, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Elevations. March Air Force Base, Riverside, California, Combat Operations Center, Combat Operations Building. By Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 14, approved March, 1962; specifications no. ENG-04-353-62-66; D.O. series AW 1596/14, Rev. "B"; file drawer 77-1/102. Last revised 3 October 1966. Scale one-eighth inch to one foot. 30x36 inches. photocopy on paper - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

  1. Sections. March Air Force Base, Riverside, California, Combat Operations Center, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Sections. March Air Force Base, Riverside, California, Combat Operations Center, Combat Operations Building. By Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 14, approved March, 1962; specifications no. ENG-04-353-62-66; D.O. series AW 1596/15, Rev. "A"; file drawer 1290. Last revised 3 October 1966. Scale one-eighth inch to one foot. 30x36 inches. pencil on paper - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

  2. Jamming transitions in force-based models for pedestrian dynamics

    NASA Astrophysics Data System (ADS)

    Chraibi, Mohcine; Ezaki, Takahiro; Tordeux, Antoine; Nishinari, Katsuhiro; Schadschneider, Andreas; Seyfried, Armin

    2015-10-01

    Force-based models describe pedestrian dynamics in analogy to classical mechanics by a system of second order ordinary differential equations. By investigating the linear stability of two main classes of forces, parameter regions with unstable homogeneous states are identified. In this unstable regime it is then checked whether phase transitions or stop-and-go waves occur. Results based on numerical simulations show, however, that the investigated models lead to unrealistic behavior in the form of backwards moving pedestrians and overlapping. This is one reason why stop-and-go waves have not been observed in these models. The unrealistic behavior is not related to the numerical treatment of the dynamic equations but rather indicates an intrinsic problem of this model class. Identifying the underlying generic problems gives indications how to define models that do not show such unrealistic behavior. As an example we introduce a force-based model which produces realistic jam dynamics without the appearance of unrealistic negative speeds for empirical desired walking speeds.

  3. Jamming transitions in force-based models for pedestrian dynamics.

    PubMed

    Chraibi, Mohcine; Ezaki, Takahiro; Tordeux, Antoine; Nishinari, Katsuhiro; Schadschneider, Andreas; Seyfried, Armin

    2015-10-01

    Force-based models describe pedestrian dynamics in analogy to classical mechanics by a system of second order ordinary differential equations. By investigating the linear stability of two main classes of forces, parameter regions with unstable homogeneous states are identified. In this unstable regime it is then checked whether phase transitions or stop-and-go waves occur. Results based on numerical simulations show, however, that the investigated models lead to unrealistic behavior in the form of backwards moving pedestrians and overlapping. This is one reason why stop-and-go waves have not been observed in these models. The unrealistic behavior is not related to the numerical treatment of the dynamic equations but rather indicates an intrinsic problem of this model class. Identifying the underlying generic problems gives indications how to define models that do not show such unrealistic behavior. As an example we introduce a force-based model which produces realistic jam dynamics without the appearance of unrealistic negative speeds for empirical desired walking speeds. PMID:26565291

  4. An EGaIn-based flexible piezoresistive shear and normal force sensor with hysteresis analysis in normal force direction

    NASA Astrophysics Data System (ADS)

    Shi, Xiaomei; Cheng, Ching-Hsiang; Zheng, Yongping; Wai, P. K. A.

    2016-10-01

    This paper reports a flexible piezoresistive shear and normal force sensor based on eutectic gallium-indium (EGaIn) with fabrication and testing results, which includes further study on the hysteresis analysis in the normal force direction. By using EGaIn as a gauge material, it can detect force on a flexible and stretchable substrate without breaking the gauge wires. However, the liquid-metal gauge wire needs to be packaged and protected in an elastomeric substrate, which creates hysteresis on the sensed resistance with respect to the change of applied force. This paper shows measurement results in static force and also under different speeds of loading force cycles. The relationship between the applied normal force and hysteresis of signal was observed, mainly owing to larger deformation and slower recovering time of the elastomeric substrate that defines the shape of the liquid-metal gauge wire for resistance measurement.

  5. Cryogel micromechanics unraveled by atomic force microscopy-based nanoindentation.

    PubMed

    Welzel, Petra B; Friedrichs, Jens; Grimmer, Milauscha; Vogler, Steffen; Freudenberg, Uwe; Werner, Carsten

    2014-11-01

    Cell-instructive physical characteristics of macroporous scaffolds, developed for tissue engineering applications, often remain difficult to assess. Here, an atomic force microscopy-based nanoindentation approach is adapted to quantify the local mechanical properties of biohybrid glycosaminoglycan-poly(ethylene glycol) cryogels. Resulting from cryoconcentration effects upon gel formation, cryogel struts are observed to feature a higher stiffness compared to the corresponding bulk hydrogel materials. Local Young's moduli, porosity, and integral moduli of the cryogel scaffolds are compared in dependence on gel formation parameters. The results provide valuable insights into the cryogelation process and a base for adjusting physical characteristics of the obtained cryogel scaffolds, which can critically influence the cellular response.

  6. Plastic media blasting activities at Hill Air Force Base

    NASA Astrophysics Data System (ADS)

    Christensen, J. D.

    1993-03-01

    Hill Air Force Base in Utah developed plastic media blasting (PMB) paint removal process for removing paint from Air Force aircraft. The development of the process involved extensive testing of various abrasives and subsequent parameters to end up with an approved production process. Hill AFB has been using PMB in a production mode since 1985, and completely discontinued chemical stripping of airframes in 1989. We have recently installed and began operating a fully automated PMB facility that utilizes two nine-axis robots to strip an aircraft. This system has enabled us to further reduce the manhours required to strip an aircraft, and also allowed us to remove the employee from the blasting atmosphere into a control room. We have, and will continue to realize, significant environmental and economic savings by using PMB. Hill is also actively involved with the development of future paint stripping technologies.

  7. Utilization of geothermal resources at United States Air Force bases

    SciTech Connect

    Grogger, P.K.

    1980-09-01

    The Air Force installations on the continental United States as well as Alaska and Hawaii, were evaluated as to the possibility of utilizing geothermal energy to develop electricity, produce process steam, or heat and/or cool buildings. Twenty-five bases have suspected geothermal resources available. Because of either need or available technology seven installations were rated priority I, six were rated priority II and priority III and IV totaled ten. Geological and geophysical data indicated further investigation of the priority I installations, Saylor Creek Range, Idaho, Ellsworth AFB, South Dakota, Charleston AFB, South Carolina, Kirkland AFB, New Mexico, Vandenberg AFB, California, Luke AFB, Arizona, and Williams AFB, Arizona, should be accomplished as soon as possible. The use of geothermal energy will decrease the need for fossil fuels by the USAF and during times of short supply allow such fuels to be used for the Air Force's primary mission, military defense.

  8. Testing the Delaware sand filter's effectiveness for treating stormwater runoff

    SciTech Connect

    Leszczynska, D.; Dzurik, A.

    1998-07-01

    The use of the Delaware Sand Filter for treatment of ultra-urban stormwater is investigated for Florida applications. An experimental Delaware filter is designed in conjunction with a typical sand filter as part of a street improvement project in Tallahassee, Florida. The design allows for testing of different filter media in an attempt to determine the suitability of the Delaware Sand Filter in hot climates with numerous heavy rainfall episodes.

  9. Application of Advanced Reservoir Characterization, Simulation, and Production Optimization Strategies to Maximize Recovery in Slope and Basin Clastic Reservoirs, West Texas (Delaware Basin), Class III

    SciTech Connect

    Dutton, Shirley P.; Flanders, William A.; Mendez, Daniel L.

    2001-05-08

    The objective of this Class 3 project was demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstone's of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost effective way to recover oil more economically through geologically based field development. This project was focused on East Ford field, a Delaware Mountain Group field that produced from the upper Bell Canyon Formation (Ramsey sandstone). The field, discovered in 9160, is operated by Oral Petco, Inc., as the East Ford unit. A CO2 flood was being conducted in the unit, and this flood is the Phase 2 demonstration for the project.

  10. Contact force measurement of instruments for force-feedback on a surgical robot: acceleration force cancellations based on acceleration sensor readings.

    PubMed

    Shimachi, Shigeyuki; Kameyama, Fumie; Hakozaki, Yoshihide; Fujiwara, Yasunori

    2005-01-01

    For delicate operations conducted using surgical robot systems, surgeons need to receive information regarding the contact forces on the tips of surgical instruments. For the detection of this contact force, one of the authors previously proposed a new method, called the overcoat method, in which the instrument is supported by sensors positioned on the overcoat pipe. This method requires cancellation of the acceleration forces of the instrument/holder attached to the overcoat sensor. In the present report, the authors attempt to use acceleration sensors to obtain the acceleration forces of the instrument/holder. The new cancellation method provides a force-detection accuracy of approximately 0.05-0.1 N for a dynamic response range of up to approximately 20 Hz, compared to approximately 1 Hz, which was achieved by using acceleration forces based on the theoretical robot motion.

  11. 4. VIEW EAST, WEST ELEVATION Delaware, Lackawanna & Western ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW EAST, WEST ELEVATION - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  12. 3. VIEW WEST, EAST ELEVATION Delaware, Lackawanna & Western ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. VIEW WEST, EAST ELEVATION - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  13. 1. VIEW SOUTH, NORTH ELEVATION Delaware, Lackawanna & Western ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW SOUTH, NORTH ELEVATION - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  14. 18. DETAIL, INSPECTION PIT Delaware, Lackawanna & Western Railroad ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. DETAIL, INSPECTION PIT - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  15. 12. DETAIL, TYPICAL WINDOW BAY Delaware, Lackawanna & Western ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. DETAIL, TYPICAL WINDOW BAY - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  16. 2. VIEW NORTH, SOUTH ELEVATION Delaware, Lackawanna & Western ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. VIEW NORTH, SOUTH ELEVATION - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  17. 19. DETAIL, OVERHEAD CATWALK Delaware, Lackawanna & Western Railroad ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. DETAIL, OVERHEAD CATWALK - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  18. 22. DETAIL, WOOD BLOCK FLOOR Delaware, Lackawanna & Western ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. DETAIL, WOOD BLOCK FLOOR - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  19. 1. DELAWARE AVE. (right, looking north) AND WASHINGTON AVE. SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. DELAWARE AVE. (right, looking north) AND WASHINGTON AVE. SHOWING GLORIA DEI CHURCH (note steeple) - Independence National Historical Park, Walnut, Sixth, Chestnut & Second Streets, Philadelphia, Philadelphia County, PA

  20. Metals in horseshoe crabs from Delaware Bay.

    PubMed

    Burger, J; Dixon, C; Shukla, T; Tsipoura, N; Jensen, H; Fitzgerald, M; Ramos, R; Gochfeld, M

    2003-01-01

    We examined the concentrations of arsenic, cadmium, chromium, lead, manganese, mercury, and selenium in the eggs, leg muscle, and apodeme (carapace musculature) in horseshoe crabs ( Limulus polyphemus) from eight places on the New Jersey and Delaware sides of Delaware Bay to determine whether there were locational differences. Although there were locational differences, the differences were not great. Further, contaminant levels were generally low. The levels of contaminants found in horseshoe crabs were well below those known to cause adverse effects in the crabs themselves or in organisms that consume them or their eggs. Contaminant levels have generally declined in the eggs of horseshoe crabs from 1993 to 2001, suggesting that contaminants are not likely to be a problem for secondary consumers or a cause of their decline.

  1. Estimating dynamic external hand forces during manual materials handling based on ground reaction forces and body segment accelerations.

    PubMed

    Faber, Gert S; Chang, Chien-Chi; Kingma, Idsart; Dennerlein, Jack T

    2013-10-18

    Direct measurement of hand forces during assessment of manual materials handling is infeasible in most field studies and some laboratory studies (e.g., during patient handling). Therefore, this study proposed and evaluated the performance of a novel hand force estimation method based on ground reaction forces (GRFs) and body segment accelerations. Ten male subjects performed a manual lifting/carrying task while an optoelectronic motion tracking system measured 3D full body kinematics, a force plate measured 3D GRFs and an instrumented box measured 3D hand forces. The estimated 3D hand forces were calculated by taking the measured GRF vector and subtracting the force vectors due to weight and acceleration of all body segments. Root-mean-square difference (RMSD) between estimated and measured hand forces ranged from 11 to 27N. When ignoring the segment accelerations (just subtracting body weight from the GRFs), the hand force estimation errors were much higher, with RMSDs ranging from 21 to 101N. Future studies should verify the performance of the proposed hand force estimation method when using an ambulatory field measurement system.

  2. Astronomy in the Delaware Public Schools Curriculum

    NASA Astrophysics Data System (ADS)

    Shipman, H.; Martin, K.; Moyer, J.; Baldwin, J.; Bole, D.; Bouchelle, H.; Densler, S.; Gizis, J.; Matthes, M.; Mills, B.; Stubbolo, G.; Sypher, J.

    2005-12-01

    100 years ago, the Committee of Ten cast astronomy into the back rooms of K-12 education, among other things. Ten years ago, the State of Delaware approved science standards which brought astronomy back to center stage. "Earth in Space" is now one of eight strands in the state's K-12 science standards. The authors of this paper form a team of university astronomers, K-12 teachers, and dedicated workers in the state's department of education. We guide statewide efforts to transform the nice words in the standards into high-quality classroom teaching. Our most robust achievements are in middle school, where the the FOSS Planetary Systems kit has given all Delaware eighth grade students an extensive exposure to astronomy. The authors of this paper have written additional materials, most classroom-tested by us, to supplement the kit and align the contents of the 8th grade curriculum with the Delaware standards. Pilot testing of the new curricular units begins in the spring of 2006, and astronomy questions will soon appear on the state assessments. Implementation of the standards in K-5 and in high school now varies considerably from teacher to teacher. We plan to help teachers who know little or no astronomy do more in their classes. In high school, a unit on the Big Bang will be developed in conjunction with a unit on biological evolution. In K-5, astronomy activities can naturally be introduced along with the other science curriculum kits that the state has used for the past decade to produce demonstrable, statistically significant improvements in student achievement. HS will lead a small team which will develop support materials. We thank the State of Delaware, private industries, the National Science Foundations Distinguished Teaching Scholars Program (DUE-0306557), and the NASA E/PO program for support.

  3. Lessons Learned from Delaware State University

    ERIC Educational Resources Information Center

    Overton, James T.

    2008-01-01

    The unfortunate events at Delaware State University (DSU) on September 21, 2007, were a whirlwind of emotions for everyone at DSU. At 12:54 a.m. Friday morning, a gunman (one of its students) shot two students who were leaving the on-campus cafe. Tragically, the female victim died one month later as a result of her injuries. As the Chief of Police…

  4. Improving public addiction treatment through performance contracting: the Delaware experiment.

    PubMed

    McLellan, A Thomas; Kemp, Jack; Brooks, Adam; Carise, Deni

    2008-09-01

    In fiscal 2002, Delaware replaced traditional cost-reimbursement contracts with performance-based contracts for all outpatient addiction treatment programs. Incentives included 90% capacity utilization and active patient participation in treatment. One of the programs failed to meet requirements. Strategies adopted by successful programs included extended hours of operation, facility enhancements, salary incentives for counselors, and two evidence-based therapies (MI and CBT). Average capacity utilization from 2001 to 2006 went from 54% to 95%; and the average proportion of patients' meeting participation requirements went from 53% to 70%--with no notable changes in the patient population. We conclude that properly designed, program-based contract incentives are feasible to apply, welcomed by programs and may help set the financial conditions necessary to implement other evidence-based clinical efforts; toward the overall goal of improving addiction treatment. PMID:18325621

  5. Improving public addiction treatment through performance contracting: The Delaware experiment☆

    PubMed Central

    McLellan, A. Thomas; Kemp, Jack; Brooks, Adam; Carise, Deni

    2009-01-01

    In fiscal 2002, Delaware replaced traditional cost-reimbursement contracts with performance-based contracts for all outpatient addiction treatment programs. Incentives included 90% capacity utilization and active patient participation in treatment. One of the programs failed to meet requirements. Strategies adopted by successful programs included extended hours of operation, facility enhancements, salary incentives for counselors, and two evidence-based therapies (MI and CBT). Average capacity utilization from 2001 to 2006 went from 54% to 95%; and the average proportion of patients’ meeting participation requirements went from 53% to 70%—with no notable changes in the patient population. We conclude that properly designed, program-based contract incentives are feasible to apply, welcomed by programs and may help set the financial conditions necessary to implement other evidence-based clinical efforts; toward the overall goal of improving addiction treatment. PMID:18325621

  6. An updated Holocene sea-level curve for the Delaware coast

    USGS Publications Warehouse

    Nikitina, D.L.; Pizzuto, J.E.; Schwimmer, R.A.; Ramsey, K.W.

    2000-01-01

    We present an updated Holocene sea-level curve for the Delaware coast based on new calibrations of 16 previously published radiocarbon dates (Kraft, 1976; Belknap and Kraft, 1977) and 22 new radiocarbon dates of basal peat deposits. A review of published and unpublished 137Cs and 210Pb analyses, and tide gauge data provide the basis for evaluating shorter-term (102 yr) sea-level trends. Paleosea-level elevations for the new basal peat samples were determined from the present vertical zonation of marsh plants relative to mean high water along the Delaware coast and the composition of plant fossils and foraminifera. Current trends in tidal range along the Delaware coast were used to reduce elevations from different locations to a common vertical datum of mean high water at Breakwater Harbor, Delaware. The updated curve is similar to Belknap and Kraft's [J. Sediment. Petrol., 47 (1977) 610-629] original sea-level curve from 12,000 to about 2000 yr BP. The updated curve documents a rate of sea-level rise of 0.9 mm/yr from 1250 yr BP to present (based on 11 dates), in good agreement with other recent sea-level curves from the northern and central U.S. Atlantic coast, while the previous curve documents rates of about 1.3 mm/yr (based on 4 dates). The precision of both estimates, however, is very low, so the significance of these differences is uncertain. A review of 210Pb and 137Cs analyses from salt marshes of Delaware indicates average marsh accretion rates of 3 mm/yr for the last 100 yr, in good agreement with shorter-term estimates of sea-level rise from tide gauge records. ?? 2000 Elsevier Science B.V.

  7. Tailoring force interactions for solvent-based processing of ceramics

    NASA Astrophysics Data System (ADS)

    Woan, Karran V.

    Environmental pollution resulting from burn-off is a major concern during ceramics processing. Focus on decreasing organic content and increasing recovery of solvents has become very desirable both from a manufacturing plant standpoint as well as from the standpoint of the government and its people. Colloid processing advances using atomic force microscopy is presented as a means to develop a solvent-based system through which interactions of particles in suspensions with the wall or with themselves can be tailored without the use of organic dispersants. Predictions are made and expected force interactions are calculated for silica particle interactions with a steel wall under various liquid environments. Attachment of a colloid sphere atop of an AFM cantilever allows for the measurement of interaction between the sphere and a surface. Van der Waals interactions in aqueous and non-aqueous environments are specifically calculated and addressed and the effect of porosity is compared with the idealized solid-sphere case. Furthermore, development of methodologies to examine force interactions of particles (both hydrophobic and hydrophilic) in solvents is detailed.

  8. Estimation of daily mean streamflow for ungaged stream locations in the Delaware River Basin, water years 1960–2010

    USGS Publications Warehouse

    Stuckey, Marla H.

    2016-06-09

    The ability to characterize baseline streamflow conditions, compare them with current conditions, and assess effects of human activities on streamflow is fundamental to water-management programs addressing water allocation, human-health issues, recreation needs, and establishment of ecological flow criteria. The U.S. Geological Survey, through the National Water Census, has developed the Delaware River Basin Streamflow Estimator Tool (DRB-SET) to estimate baseline (minimally altered) and altered (affected by regulation, diversion, mining, or other anthropogenic activities) and altered streamflow at a daily time step for ungaged stream locations in the Delaware River Basin for water years 1960–2010. Daily mean baseline streamflow is estimated by using the QPPQ method to equate streamflow expressed as a percentile from the flow-duration curve (FDC) for a particular day at an ungaged stream location with the percentile from a FDC for the same day at a hydrologically similar gaged location where streamflow is measured. Parameter-based regression equations were developed for 22 exceedance probabilities from the FDC for ungaged stream locations in the Delaware River Basin. Water use data from 2010 is used to adjust the baseline daily mean streamflow generated from the QPPQ method at ungaged stream locations in the Delaware River Basin to reflect current, or altered, conditions. To evaluate the effectiveness of the overall QPPQ method contained within DRB-SET, a comparison of observed and estimated daily mean streamflows was performed for 109 reference streamgages in and near the Delaware River Basin. The Nash-Sutcliffe efficiency (NSE) values were computed as a measure of goodness of fit. The NSE values (using log10 streamflow values) ranged from 0.22 to 0.98 (median of 0.90) for 45 streamgages in the Upper Delaware River Basin and from -0.37 to 0.98 (median of 0.79) for 41 streamgages in the Lower Delaware River Basin.

  9. Geothermal studies at Kirtland Air Force Base, Albuquerque, New Mexico

    SciTech Connect

    Riddle, L.; Grant, B.

    1981-05-01

    Due to an effort by government installations to discontinue use of natural gas, alternative energy sources are being investigated at Kirtland Air Force Base, Albuquerque, New Mexico. New Mexico has geologic characteristics favorable for geothermal energy utilization. Local heat flow and geochemical studies indicate a normal subsurface temperature regime. The alluvial deposits, however, extend to great depths where hot fluids, heated by the normal geothermal gradient, could be encountered. Two potential models for tapping geothermal energy are presented: the basin model and the fault model.

  10. Vandenberg Air Force Base Pressure Gradient Wind Study

    NASA Technical Reports Server (NTRS)

    Shafer, Jaclyn A.

    2013-01-01

    Warning category winds can adversely impact day-to-day space lift operations at Vandenberg Air Force Base (VAFB) in California. NASA's Launch Services Program and other programs at VAFB use wind forecasts issued by the 30 Operational Support Squadron Weather Flight (30 OSSWF) to determine if they need to limit activities or protect property such as a launch vehicle. The 30 OSSWF tasked the AMU to develop an automated Excel graphical user interface that includes pressure gradient thresholds between specific observing stations under different synoptic regimes to aid forecasters when issuing wind warnings. This required the AMU to determine if relationships between the variables existed.

  11. Mercury concentrations in tidal marsh sparrows and their use as bioindicators in Delaware Bay, USA.

    PubMed

    Warner, Sarah E; Shriver, W Gregory; Pepper, Margaret A; Taylor, Robert J

    2010-12-01

    Mercury (Hg) contamination from industrial sources is pervasive throughout North America and is recognized by the US Environmental Protection Agency as a health hazard for wildlife and humans. Avian species are commonly used as bioindicators of Hg because they are sensitive to contaminants in the environment and are relatively easy to sample. However, it is important to select the appropriate avian species to use as a bioindicator, which should be directly related to the project objectives. In this study, we tested the utility of two tidal marsh sparrows, Seaside (Ammodramus maritimus) and Saltmarsh (Ammodramus caudacutus) sparrows, as bioindicator species of the extent of Hg contamination in tidal marshes along the Delaware Bay. To determine the possibility of using one or both of these species, we estimated sparrow blood Hg burden in five Delaware watersheds. We found no difference in Hg concentrations between species (F (1,133) < 0.01, P=0.99), but Saltmarsh Sparrows had limited sample size from each site and were, therefore, not appropriate for a Delaware Bay-wide Hg indicator. Seaside Sparrows, however, were abundant and relatively easy to sample in the five watersheds. Seaside Sparrow blood Hg levels ranged from 0.15 to 2.12 ppm, differed among drainages, and were greatest in two drainages distant from the Delaware Bay shoreline (F (4,95) =2.51, P=0.05). Based on a power analysis for Seaside Sparrow blood Hg, we estimated that 16 samples would be necessary to detect differences among sites. Based on these data, we propose that Seaside Sparrows may be used as a tidal marsh Hg bioindicator species given their habitat specificity, relative abundance, widespread distribution in marsh habitats, ease of sampling, and limited variation in blood Hg estimates within a sampling area. In Delaware Bay, Saltmarsh Sparrows may be too rare (making them difficult to sample) to be a viable tidal marsh Hg bioindicator.

  12. Late Pleistocene drainage systems beneath Delaware Bay

    USGS Publications Warehouse

    Knebel, H. J.; Circe, R.C.

    1988-01-01

    Analyses of an extensive grid of seismic-reflection profiles, along with previously published sedimentary data and geologic information from surrounding coastal areas, outline the ancestral drainage systems of the Delaware River beneath lower Delaware Bay. Major paleovalleys within these systems have southeast trends, relief of 10-35 m, widths of 1-8 km, and axial depths of 31-57 m below present sea level. The oldest drainage system was carved into Miocene sands, probably during the late Illinoian lowstand of sea level. It followed a course under the northern half of the bay, continued beneath the Cape May peninsula, and extended onto the present continental shelf. This system was buried by a transgressive sequence of fluvial, estuarine, and shallow-marine sediments during Sangamonian time. At the height of the Sangamonian sea-level transgression, littoral and nearshore processes built the Cape May peninsula southward over the northern drainage system and formed a contiguous submarine sedimentary ridge that extended partway across the present entrance to the bay. When sea level fell during late Wisconsinan time, a second drainage system was eroded beneath the southern half of the bay in response to the southerly shift of the bay mouth. This system, which continued across the shelf, was cut into Coastal Plain deposits of Miocene and younger age and included not only the trunk valley of the Delaware River but a large tributary valley formed by the convergence of secondary streams that drained the Delaware coastal area. During the Holocene rise of sea level, the southern drainage system was covered by a transgressive sequence of fluvial, estuarine, and paralic deposits that accumulated due to the passage of the estuarine circulation cell and to the landward and upward migration of coastal sedimentary environments. Some Holocene deposits have been scoured subsequently by strong tidal currents. The southward migration of the ancestral drainage systems beneath Delaware

  13. Eielson Air Force Base OU-1 baseline risk assessment

    SciTech Connect

    Jarvis, M.T.; Jarvis, T.T.; Van Houten, N.C.; Lewis, R.E.

    1993-09-01

    This Baseline Risk Assessment report is the second volume in a set of three volumes for operable Unit 1 (OU-1). The companion documents contain the Remedial Investigation and the Feasibility Study. Operable Unit 1 (OU-1) is one of several groups of hazardous waste sites located at Eielson Air Force Base (AFB) near Fairbanks, Alaska. The operable units at Eielson are typically characterized by petroleum, oil, lubricant/solvent contamination, and by the presence of organics floating at the water table. In 1989 and 1990, firms under contract to the Air Force conducted field studies to gather information about the extent of chemical contamination in soil, groundwater, and soil air pore space (soil gas) at the site. This report documents the results of a baseline risk assessment, which uses the 1989 and 1991 site characterization database to quantify the potential human health risk associated with past Base industrial activities in the vicinity of OU-1. Background data collected in 1992 were also used in the preparation of this report.

  14. Feedback Control of Floor Reaction Force Based on Force-Reflecting-Type Multilateral Control

    NASA Astrophysics Data System (ADS)

    Nagase, Kazuki; Katsura, Seiichiro

    Real-world haptics is being studied not only for improving feedback on real-world haptic information in teleoperation but also for developing key technologies for future human support. For the remote operating of systems at distant places, haptic information is required in addition to visual information. The haptic information around a work environment can be the floor reaction force, which can be obtained using a movement-type haptic device. The floor reaction force from the environment that the mobile haptic device touches is fed back accurately to the operator. First, this paper proposes a general force-reflecting-type multilateral control. Second, this paper extends the control to feedback control of the floor reaction force by using force-reflecting-type multilateral control and a novel haptic device employing a biped robot with a slave system. The position response of a master system is transformed to a leg tip position command for the biped-type haptic device. In addition, the floor reaction force determined by the biped-type haptic device is fed back to the master system. The proposed method can determine the force feedback to the sole of the foot, which is not possible with a conventional stationary system. As a result, the floor reaction force from a large area can be obtained, and the operability of the control system is improved by using the proposed system.

  15. The University of Delaware Carlson International Polar Year Events: Collaborative and Educational Outreach

    NASA Astrophysics Data System (ADS)

    Nelson, F. E.; Bryant, T.; Wellington, P.; Dooley, J.; Bird, M.

    2008-12-01

    Delaware is a small state with, by virtue of its coastal location, a large stake in climatic change in the polar regions. The University of Delaware has maintained a strong presence in cold-regions research since the mid-1940s, when William Samuel Carlson, a highly accomplished Arctic explorer, military strategist, and earth scientist, was named 20th President (1946-50) of the University. Carlson played a leading role in two of the University of Michigan's Greenland expeditions in the late 1920s and early 1930s. As Director of the Arctic, Desert, and Tropic Branch of the US Army Air Forces Tactical Center during World War II, Colonel Carlson played a role in developing several air transportation routes through the Arctic that helped to facilitate the Allied victory in Europe. Carlson authored many scientific and popular publications concerned with the Arctic, including the books Greenland Lies North (1940) and Lifelines Through the Arctic (1962). Although the University of Delaware has maintained a vigorous and continuous program of polar research since Carlson's tenure, the faculty, staff, and students involved are diffused throughout the University's colleges and departments, without an institutional focal point. Consequently, although many of these individuals are well known in their respective fields, the institution has not until recently been perceived widely as a center of polar-oriented research. The goals of the Carlson International Polar Year Events are to: (a) develop a sense of community among UD's diffuse polar-oriented researchers and educators; (b) create a distinctive and highly visible role for UD in the milieu of IPY activities; (c) promote interest in and knowledge about the polar regions in the State of Delaware, at all educational levels; (d) forge a close relationship between UD and the American Geographical Society, a national organization involved closely with previous International Polar Years; and (e) create a new basis for development

  16. A novel reciprocating micropump based on Lorentz force

    NASA Astrophysics Data System (ADS)

    Salari, Alinaghi; Hakimsima, Abbas; Shafii, Mohammad Behshad

    2015-03-01

    Lorentz force is the pumping basis of many electromagnetic micropumps used in lab-on-a-chip. In this paper a novel reciprocating single-chamber micropump is proposed, in which the actuation technique is based on Lorentz force acting on an array of microwires attached on a membrane surface. An alternating current is applied through the microwires in the presence of a magnetic field. The resultant force causes the membrane to oscillate and pushes the fluid to flow through microchannel using a ball-valve. The pump chamber (3 mm depth) was fabricated on a Polymethylmethacrylate (PMMA) substrate using laser engraving technique. The chamber was covered by a 60 μm thick hyper-elastic latex rubber diaphragm. Two miniature permanent magnets capable of providing magnetic field of 0.09 T at the center of the diaphragm were mounted on each side of the chamber. Square wave electric current with low-frequencies was generated using a function generator. Cylindrical copper microwires (250 μm diameter and 5 mm length) were attached side-by-side on top surface of the diaphragm. Thin loosely attached wires were used as connectors to energize the electrodes. Due to large displacement length of the diaphragm (~3 mm) a high efficiency (~90%) ball valve (2 mm diameter stainless steel ball in a tapered tubing structure) was used in the pump outlet. The micropump exhibits a flow rate as high as 490 μl/s and pressure up to 1.5 kPa showing that the pump is categorized among high-flow-rate mechanical micropumps.

  17. Fourth Summative Report of the Delaware PLATO Project.

    ERIC Educational Resources Information Center

    Hofstetter, Fred T.

    A brief history of the Delaware PLATO project and descriptions of new developments in facilities, applications, user services, research, evaluation, and courseware produced since the Third Summative Report (1978) are provided, as well as an overview of PLATO applications at the University of Delaware. Sample lessons, illustrations, and activity…

  18. Alcoholic Beverage Buying Habits of University of Delaware Students

    ERIC Educational Resources Information Center

    Newton, John P.

    1978-01-01

    Goal of study was comparing alcoholic beverage buying habits of University of Delaware students with those of students at other colleges. Random sample of 639 was drawn from 13,000 undergraduates and interviews conducted. Drinking at Delaware was similar to that at other schools. Seniors spent significantly more on alcohol than freshmen. (Author)

  19. Fifth Summative Report of the Delaware PLATO Project.

    ERIC Educational Resources Information Center

    Hofstetter, Fred T.

    A brief history of the Delaware PLATO project and descriptions of the new developments in facilities, applications, user services, research, evaluation, and courseware produced since the Fourth Summative Report (1979) are provided, as well as an overview of PLATO applications at the University of Delaware. Sample lessons, illustrations, and…

  20. 75 FR 51457 - Delaware Pipeline Company LLC; Notice of Filing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-20

    ... Energy Regulatory Commission Delaware Pipeline Company LLC; Notice of Filing August 13, 2010. Take notice that on July 13, 2010, Delaware Pipeline Company LLC (DPC) submitted a request for waiver of the requirement to file the FERC Form No. 6-Q for the second quarter of 2010. On June 1, 2010, DPC acquired...

  1. 76 FR 60850 - Delaware; Emergency and Related Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-30

    ... SECURITY Federal Emergency Management Agency Delaware; Emergency and Related Determinations AGENCY: Federal Emergency Management Agency, DHS. ACTION: Notice. SUMMARY: This is a notice of the Presidential declaration of an emergency for the State of Delaware (FEMA-3336-EM), dated August 28, 2011, and...

  2. 77 FR 69490 - Delaware; Emergency and Related Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-19

    ... SECURITY Federal Emergency Management Agency Delaware; Emergency and Related Determinations AGENCY: Federal Emergency Management Agency, DHS. ACTION: Notice. SUMMARY: This is a notice of the Presidential declaration of an emergency for the State of Delaware (FEMA-3357-EM), dated October 29, 2012, and...

  3. 33 CFR 110.67 - Delaware River, Essington, Pa.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Delaware River, Essington, Pa. 110.67 Section 110.67 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES ANCHORAGE REGULATIONS Special Anchorage Areas § 110.67 Delaware River, Essington, Pa. North...

  4. Career Education Resource Bibliography: Delaware's Occupational-Vocational Education Model.

    ERIC Educational Resources Information Center

    Milford Special School District, DE.

    This bibliography lists professional books and instructional materials, concerning aspects of career education, for Delaware's Occupational-Vocational Education Model, at Milford, Delaware. Entries are arranged alphabetically by title under these categories: (1) Educational Theory, including theories relating to career development, child…

  5. Investing in Better Outcomes: The Delaware Early Childhood Longitudinal Study.

    ERIC Educational Resources Information Center

    Gamel-McCormick, Michael; Amsden, Deborah

    This report details the outcomes for children enrolled in two types of early intervention programs in Delaware: those serving young children with disabilities and those serving young children living in poverty. The Delaware Early Childhood Longitudinal Study was designed as a retrospective, two-group, posttest-only design. Participating in the…

  6. Delaware Pushes to Meet Race to Top Promises

    ERIC Educational Resources Information Center

    McNeil, Michele

    2011-01-01

    This article reports on how Delaware pushes to meet Race to the Top promises. The Delcastle Technical High School teachers are on the front lines of the push to deliver on promises that last year won Delaware, 10 other states, and the District of Columbia shares of the Race to the Top pie, the $4 billion competition that is driving much of the…

  7. 33 CFR 117.235 - Chesapeake and Delaware Canal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... 117.235 Section 117.235 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Delaware § 117.235 Chesapeake and Delaware..., located in the center of the drawspan on both sides of the bridge, shall be used: (a) When the draw is...

  8. 33 CFR 117.235 - Chesapeake and Delaware Canal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... 117.235 Section 117.235 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Delaware § 117.235 Chesapeake and Delaware..., located in the center of the drawspan on both sides of the bridge, shall be used: (a) When the draw is...

  9. 33 CFR 117.235 - Chesapeake and Delaware Canal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... 117.235 Section 117.235 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Delaware § 117.235 Chesapeake and Delaware..., located in the center of the drawspan on both sides of the bridge, shall be used: (a) When the draw is...

  10. Kids Count in Delaware, Families Count in Delaware: Fact Book, 2003.

    ERIC Educational Resources Information Center

    Delaware Univ., Newark. Kids Count in Delaware.

    This Kids Count Fact Book is combined with the Families Count Fact Book to provide information on statewide trends affecting children and families in Delaware. The Kids Count and Families Count indicators have been combined into four new categories: health and health behaviors, educational involvement and achievement, family environment and…

  11. Force-compensated hydrogel-based pH sensor

    NASA Astrophysics Data System (ADS)

    Deng, Kangfa; Gerlach, Gerald; Guenther, Margarita

    2015-04-01

    This paper presents the design, simulation, assembly and testing of a force-compensated hydrogel-based pH sensor. In the conventional deflection method, a piezoresistive pressure sensor is used as a chemical-mechanical-electronic transducer to measure the volume change of a pH-sensitive hydrogel. In this compensation method, the pH-sensitive hydrogel keeps its volume constant during the whole measuring process, independent of applied pH value. In order to maintain a balanced state, an additional thermal actuator is integrated into the close-loop sensor system with higher precision and faster dynamic response. Poly (N-isopropylacrylamide) (PNIPAAm) with 5 mol% monomer 3-acrylamido propionic acid (AAmPA) is used as the temperature-sensitive hydrogel, while poly (vinyl alcohol) with poly (acrylic acid) (PAA) serves as the pH-sensitive hydrogel. A thermal simulation is introduced to assess the temperature distribution of the whole microsystem, especially the temperature influence on both hydrogels. Following tests are detailed to verify the working functions of a sensor based on pH-sensitive hydrogel and an actuator based on temperature-sensitive hydrogel. A miniaturized prototype is assembled and investigated in deionized water: the response time amounts to about 25 min, just half of that one of a sensor based on the conventional deflection method. The results confirm the applicability of t he compensation method to the hydrogel-based sensors.

  12. Water Resources Investigations at Edwards Air Force Base since 1988

    USGS Publications Warehouse

    Sneed, Michelle; Nishikawa, Tracy; Martin, Peter

    2006-01-01

    Edwards Air Force Base (EAFB) in southern California (fig. 1) has relied on ground water to meet its water-supply needs. The extraction of ground water has led to two major problems that can directly affect the mission of EAFB: declining water levels (more than 120 ft since the 1920s) and land subsidence, a gradual downward movement of the land surface (more than 4 ft since the late 1920s). As water levels decline, this valuable resource becomes depleted, thus requiring mitigating measures. Land subsidence has caused cracked (fissured) runways and accelerated erosion on Rogers lakebed. In 1988, the U.S. Geological Survey (USGS), in cooperation with the U.S. Air Force, began investigations of the effects of declining water levels and land subsidence at EAFB and possible mitigation measures, such as the injection of imported surface water into the ground-water system. The cooperative investigations included data collection and analyses, numerical simulations of ground-water flow and land subsidence, and development of a preliminary simulation-optimization model. The results of these investigations indicate that the injection of imported water may help to control land subsidence; however, the potential ground-water-quality impacts are unknown.

  13. 33 CFR 207.100 - Inland waterway from Delaware River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... River to Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal); use, administration, and... Chesapeake Bay, Del. and Md. (Chesapeake and Delaware Canal); use, administration, and navigation. (a... regulations and monitor traffic through the canal. (c) Safe navigation required. Clearance for any vessel...

  14. The Courts, the Legislature, and Delaware's Resegregation: A Report on School Segregation in Delaware, 1989-­2010

    ERIC Educational Resources Information Center

    Niemeyer, Arielle

    2014-01-01

    Delaware's history with school desegregation is complicated and contradictory. The state both advanced and impeded the goals of "Brown v. Board of Education." After implementing desegregation plans that were ineffective by design, Delaware was ultimately placed under the first metropolitan, multi-district desegregation court order in the…

  15. Relighting demonstration project Robins Air Force Base, Georgia

    SciTech Connect

    Larson, L.L.; Purcell, C.W.; McKay, H.; Harris, L.

    1994-09-01

    Significant energy savings are available through relighting with modern, energy efficient systems. As a demonstration, a relighting project was recently completed at Robins Air Force Base, Warner-Robins, Georgia. The project was designed to overcome a reluctance to pursue large scale relighting of the entire facility due to prior unfavorable experiences and an unusually large non-office working environment. The project followed contemporary lighting design practices, with the added dimension of involving building occupants in the process. Involving building occupants promoted their acceptance of the project and provided needed critical feedback. Their involvement helped secure their assistance in resolving special design concerns involving radio frequency interference and glare. Although often cited as simple, relighting projects are commonly confronted with problems. This document describes problems, foreseen and unforeseen, encountered by this relighting demonstration, and their solutions.

  16. Force feedback microscopy based on an optical beam deflection scheme

    SciTech Connect

    Vitorino, Miguel V.; Rodrigues, Mario S.; Carpentier, Simon; Costa, Luca

    2014-07-07

    Force feedback microscopy circumvents the jump to contact in atomic force microscopy when using soft cantilevers and quantitatively measures the interaction properties at the nanoscale by simultaneously providing force, force gradient, and dissipation. The force feedback microscope developed so far used an optical cavity to measure the tip displacement. In this Letter, we show that the more conventional optical beam deflection scheme can be used to the same purpose. With this instrument, we have followed the evolution of the Brownian motion of the tip under the influence of a water bridge.

  17. Sitewide feasibility study Eielson Air Force Base, Alaska

    SciTech Connect

    Last, G.V.; Lanigan, D.C.; Josephson, G.B.; Bagaasen, L.M.

    1995-09-01

    The Sitewide Feasibility Study (FS) is required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the National Contingency Plan (NCP), and the Federal Facility Agreement (FFA) for Eielson Air Force Base (AFB). It is based on findings presented in the Sitewide Remedial Investigation (RI) Report (USAF 1995a), and the Sitewide Baseline Risk Assessment (BLRA) Report (USAF 1995b). Under the FFA, 64 potential source areas were placed in one of six operable units, based on similar contaminant and environmental characteristics, or were included for evaluation under a Source Evaluation Report (SER). The sitewide RI was directed at contamination that was not confined to an operable unit (OU) or SER source area. The objectives of the sitewide RI were to: Provide information about site characteristics to support individual OU RI/FS efforts and the sitewide RI/FS, including site hydrogeology and determination of background soil and groundwater characteristics; identify and characterize contamination that is not confined or attributable to a specific source area through sitewide monitoring of groundwater and surface water; evaluate cumulative risks to human health and the environment from contamination on a sitewide basis; and provide a mechanism for continued cohesive sitewide monitoring.

  18. Review of wildlife resources of Vandenberg Air Force Base, California

    NASA Technical Reports Server (NTRS)

    Breininger, David R.

    1989-01-01

    Wildlife resources are reviewed for purposes of developing a Base Biological Monitoring Program (BMP) for Vandenberg Air Force Base (VAFB) in Santa Barbara County, California. The review and recommendations were prepared by review of applicable scientific literature and environmental documents for VAFB, discussing information needs with natural resource management professionals at VAFB, and observations of base field conditions. This process found that there are 29 federally listed vertebrates (endangered, threatened, or Category 2) that occur or may occur in the vicinity of VAFB. There are also 63 other state listed or regionally declining species that may occur in the vicinity of VAFB. Habitats of VAFB represent a very valuable environmental resource for rare and declining wildlife in California. However, little information is available on VAFB wildlife resources other than lists of species that occur or are expected to occur. Recommendations are presented to initiate a long-term wildlife monitoring program at VAFB to provide information for environmental impact assessment and wise land use planning.

  19. History of wildland fires on Vandenberg Air Force Base, California

    NASA Technical Reports Server (NTRS)

    Hickson, Diana E.

    1988-01-01

    The fire history of the past 50 years for Vandenberg AFB, California was determined using aerial photography, field investigation, and historical and current written records. This constitutes a record of the vegetation age classes for the entire base. The location, cause, and fuel type for sixty fires from this time period were determined. The fires were mapped and entered into a geographic infomation system (GIS) for Vandenberg. Fire history maps derived from this GIS were printed at 1:9600 scale and are on deposit at the Vandenberg Environmental Task Force Office. Although some ecologically significant plant communities on Vandenberg are adapted to fire, no natural fire frequency could be determined, since only one fire possibly caused by lightning occurred in the area now within the base since 1937. Observations made during this study suggest that burning may encourage the invasion of exotic species into chaparral, in particular Burton Mesa or sandhill chaparral, an unusual and geographically limited form of chaparral found on the base.

  20. Vegetation studies on Vandenberg Air Force Base, California

    NASA Technical Reports Server (NTRS)

    Schmalzer, Paul A.; Hickson, Diana E.; Hinkle, C. Ross

    1988-01-01

    Vandenburg Air Force Base, located in coastal central California with an area of 98,400 ac, contains resources of considerable biological significance. Available information on the vegetation and flora of Vandenburg is summarized and new data collected in this project are presented. A bibliography of 621 references dealing with vegetation and related topics related to Vanderburg was compiled from computer and manual literature searches and a review of past studies of the base. A preliminary floristic list of 642 taxa representing 311 genera and 80 families was compiled from past studies and plants identified in the vegetation sampling conducted in this project. Fifty-two special interest plant species are known to occur or were suggested to occur. Vegetation was sampled using permanent plots and transects in all major plant communities including chaparral, Bishop pine forest, tanbark oak forest, annual grassland, oak woodland, coastal sage scrub, purple sage scrub, coastal dune scrub, coastal dunes, box elder riparian woodland, will riparian woodland, freshwater marsh, salt marsh, and seasonal wetlands. Comparison of the new vegetation data to the compostie San Diego State University data does not indicate major changes in most communities since the original study. Recommendations are made for additional studies needed to maintain and extend the environmental data base and for management actions to improve resource protection.

  1. Towards a force field based on density fitting.

    PubMed

    Piquemal, Jean-Philip; Cisneros, G Andrés; Reinhardt, Peter; Gresh, Nohad; Darden, Thomas A

    2006-03-14

    Total intermolecular interaction energies are determined with a first version of the Gaussian electrostatic model (GEM-0), a force field based on a density fitting approach using s-type Gaussian functions. The total interaction energy is computed in the spirit of the sum of interacting fragment ab initio (SIBFA) force field by separately evaluating each one of its components: electrostatic (Coulomb), exchange repulsion, polarization, and charge transfer intermolecular interaction energies, in order to reproduce reference constrained space orbital variation (CSOV) energy decomposition calculations at the B3LYP/aug-cc-pVTZ level. The use of an auxiliary basis set restricted to spherical Gaussian functions facilitates the rotation of the fitted densities of rigid fragments and enables a fast and accurate density fitting evaluation of Coulomb and exchange-repulsion energy, the latter using the overlap model introduced by Wheatley and Price [Mol. Phys. 69, 50718 (1990)]. The SIBFA energy scheme for polarization and charge transfer has been implemented using the electric fields and electrostatic potentials generated by the fitted densities. GEM-0 has been tested on ten stationary points of the water dimer potential energy surface and on three water clusters (n = 16,20,64). The results show very good agreement with density functional theory calculations, reproducing the individual CSOV energy contributions for a given interaction as well as the B3LYP total interaction energies with errors below kBT at room temperature. Preliminary results for Coulomb and exchange-repulsion energies of metal cation complexes and coupled cluster singles doubles electron densities are discussed.

  2. Acoustic Radiation Force Impulse (ARFI) Imaging-Based Needle Visualization

    PubMed Central

    Rotemberg, Veronica; Palmeri, Mark; Rosenzweig, Stephen; Grant, Stuart; Macleod, David; Nightingale, Kathryn

    2011-01-01

    Ultrasound-guided needle placement is widely used in the clinical setting, particularly for central venous catheter placement, tissue biopsy and regional anesthesia. Difficulties with ultrasound guidance in these areas often result from steep needle insertion angles and spatial offsets between the imaging plane and the needle. Acoustic Radiation Force Impulse (ARFI) imaging leads to improved needle visualization because it uses a standard diagnostic scanner to perform radiation force based elasticity imaging, creating a displacement map that displays tissue stiffness variations. The needle visualization in ARFI images is independent of needle-insertion angle and also extends needle visibility out of plane. Although ARFI images portray needles well, they often do not contain the usual B-mode landmarks. Therefore, a three-step segmentation algorithm has been developed to identify a needle in an ARFI image and overlay the needle prediction on a coregistered B-mode image. The steps are: (1) contrast enhancement by median filtration and Laplacian operator filtration, (2) noise suppression through displacement estimate correlation coefficient thresholding and (3) smoothing by removal of outliers and best-fit line prediction. The algorithm was applied to data sets from horizontal 18, 21 and 25 gauge needles between 0–4 mm offset in elevation from the transducer imaging plane and to 18G needles on the transducer axis (in plane) between 10° and 35° from the horizontal. Needle tips were visualized within 2 mm of their actual position for both horizontal needle orientations up to 1.5 mm off set in elevation from the transducer imaging plane and on-axis angled needles between 10°–35° above the horizontal orientation. We conclude that segmented ARFI images overlaid on matched B-mode images hold promise for improved needle visibility in many clinical applications. PMID:21608445

  3. 33 CFR 165.768 - Security Zone; MacDill Air Force Base, Tampa Bay, FL.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zone; MacDill Air Force....768 Security Zone; MacDill Air Force Base, Tampa Bay, FL. (a) Location. The following area is a... title. All waters within Tampa Bay, Florida in the vicinity of MacDill Air Force Base,...

  4. A voice coil motor based measuring force control system for tactile scanning profiler

    NASA Astrophysics Data System (ADS)

    Feng, Shengdong; Liu, Xiaojun; Chen, Liangzhou; Zhou, Liping; Lu, Wenlong

    2015-02-01

    In tactile scanning profiler, the measuring force would change in a wide range when it was used for profile measurement in a large range, which could possibly destroy the measured surface. To solve the problem, measuring force control system for tactile scanning profiler was needed. In the paper, a voice coil motor-based measuring force control system for tactile scanning profiler was designed. In the design, a low stiffness coefficient spring was used to provide contact force, while a voice coil motor (VCM) to balance the spring force so that the contact force could be kept for constant measuring force. A VCM was designed specially, and for active measuring force control, a precision current source circuit under the control of a DSP unit was designed to drive the VCM. The performance of voice coil motor based measuring force control system had been tested, and its good characteristics were verified.

  5. Effects of runoff changes and sea level rise on salinity in the Delaware River estuary

    USGS Publications Warehouse

    Walters, Roy A.

    1989-01-01

    The objective of this study is to investigate changes in the spatial distribution of salt in the Delaware Estuary resulting from climate induced changes in freshwater inflows and in the position of mean sea level. The approach adopted for this study is composed of two parts: An analysis of existing physical data in order to derive a basic understanding of the salt dynamics, and numerical simulation of future conditions based upon this analysis.

  6. Optical fiber-based force transducer for microscale samples.

    PubMed

    Seshagiri Rao, R V; Kalelkar, Chirag; Pullarkat, Pramod A

    2013-10-01

    We discuss the design, instrumentation, and calibration of a versatile force transducer with feedback control, called the Micro-Extensional Rheometer (MER). A force range of eight decades (1-10(8) pN) and a displacement range of four decades (10-10(5) nm) with a spatial resolution of the order of nanometers are accessible with the instrument. A feedback-loop algorithm is used to control the commanded force or the extensional strain on the sample and implement different rheometric protocols such as step-strain, step-force, exponential strain, among others. The device may also be used to measure the forces exerted by active suspensions, pulling neurons, etc. PMID:24182163

  7. Water-level data for the industrial area northwest of Delaware City, Delaware, 1993-94

    USGS Publications Warehouse

    Donnelly, C.A.; Hinaman, K.C.

    1996-01-01

    Water-level data for 171 wells and one surface-water site on Red Lion Creek in the industrial area northwest of Delaware City, Delaware, are presented for 1993 and 1994. Eight sets of synoptic ground- water-level measurements collected between April 1993 and September 1994, and locations and field notes for the 171 wells are presented. A hydrograph from December 19, 1993 through November 8, 1994 is presented for one surface-water site on Red Lion Creek in the industrial area. Hydrographs from October 15, 1993 through November 8, 1994 are presented for eight wells screened in the water- table aquifer. The U.S. Army Corps of Engineers collected the synoptic ground-water-level measurements. The U.S. Geological Survey collected the continuously recorded water-level data.

  8. Comparison of force sensors for atomic force microscopy based on quartz tuning forks and length-extensional resonators

    NASA Astrophysics Data System (ADS)

    Giessibl, Franz J.; Pielmeier, Florian; Eguchi, Toyoaki; An, Toshu; Hasegawa, Yukio

    2011-09-01

    The force sensor is key to the performance of atomic force microscopy (AFM). Nowadays, most atomic force microscopes use micromachined force sensors made from silicon, but piezoelectric quartz sensors are being applied at an increasing rate, mainly in vacuum. These self-sensing force sensors allow a relatively easy upgrade of a scanning tunneling microscope to a combined scanning tunneling/atomic force microscope. Two fundamentally different types of quartz sensors have achieved atomic resolution: the “needle sensor,” which is based on a length-extensional resonator, and the “qPlus sensor,” which is based on a tuning fork. Here, we calculate and measure the noise characteristics of these sensors. We find four noise sources: deflection detector noise, thermal noise, oscillator noise, and thermal drift noise. We calculate the effect of these noise sources as a factor of sensor stiffness, bandwidth, and oscillation amplitude. We find that for self-sensing quartz sensors, the deflection detector noise is independent of sensor stiffness, while the remaining three noise sources increase strongly with sensor stiffness. Deflection detector noise increases with bandwidth to the power of 1.5, while thermal noise and oscillator noise are proportional to the square root of the bandwidth. Thermal drift noise, however, is inversely proportional to bandwidth. The first three noise sources are inversely proportional to amplitude while thermal drift noise is independent of the amplitude. Thus, we show that the earlier finding that quoted an optimal signal-to-noise ratio for oscillation amplitudes similar to the range of the forces is still correct when considering all four frequency noise contributions. Finally, we suggest how the signal-to-noise ratio of the sensors can be improved further, we briefly discuss the challenges of mounting tips, and we compare the noise performance of self-sensing quartz sensors and optically detected Si cantilevers.

  9. Development of Tuning Fork Based Probes for Atomic Force Microscopy

    NASA Astrophysics Data System (ADS)

    Jalilian, Romaneh; Yazdanpanah, Mehdi M.; Torrez, Neil; Alizadeh, Amirali; Askari, Davood

    2014-03-01

    This article reports on the development of tuning fork-based AFM/STM probes in NaugaNeedles LLC for use in atomic force microscopy. These probes can be mounted on different carriers per customers' request. (e.g., RHK carrier, Omicron carrier, and tuning fork on a Sapphire disk). We are able to design and engineer tuning forks on any type of carrier used in the market. We can attach three types of tips on the edge of a tuning fork prong (i.e., growing Ag2Ga nanoneedles at any arbitrary angle, cantilever of AFM tip, and tungsten wire) with lengths from 100-500 μm. The nanoneedle is located vertical to the fork. Using a suitable insulation and metallic coating, we can make QPlus sensors that can detect tunneling current during the AFM scan. To make Qplus sensors, the entire quartz fork will be coated with an insulating material, before attaching the nanoneedle. Then, the top edge of one prong is coated with a thin layer of conductive metal and the nanoneedle is attached to the fork end of the metal coated prong. The metal coating provides electrical connection to the tip for tunneling current readout and to the electrodes and used to read the QPlus current. Since the amount of mass added to the fork is minimal, the resonance frequency spectrum does not change and still remains around 32.6 KHz and the Q factor is around 1,200 in ambient condition. These probes can enhance the performance of tuning fork based atomic microscopy.

  10. Equinox. A Model for the Natural Science Education Curriculum for the Ninth Through Twelfth Grades in the Delaware Schools.

    ERIC Educational Resources Information Center

    Baker, Thomas M.; Reiher, John F.

    This publication represents a model for the Natural Science Education Curriculum for grades nine through twelve in Delaware's schools. This guide is meant to serve as a minimal standard for natural science education, but at the same time strives for maximum output of the natural science program. The guide is based on the processes of science…

  11. Equinox. A Model for the Natural Science Education Curriculum for the Second, Third, and Fourth Grades in the Delaware Schools.

    ERIC Educational Resources Information Center

    Baker, Thomas M.; Reiher, John F.

    This publication represents a model for the Natural Science Education Curriculum for grades two through four in Delaware's schools. This guide is meant to serve as a minimal standard for natural science education, but at the same time strives for maximum output of the natural science program. The guide is based on the processes of science…

  12. Equinox. A Model for the Natural Science Education Curriculum for Kindergarten and First Grade in Delaware's Schools.

    ERIC Educational Resources Information Center

    Baker, Thomas M.; Reiher, John F.

    This publication represents a model for the Natural Science Education Curriculum for kindergarten and grade one in Delaware's schools. This guide is meant to serve as a minimal standard for natural science education, but at the same time strives for maximum output of the natural science program. The guide is based on the processes of science…

  13. ON THE WIND-INDUCED EXCHANGE BETWEEN INDIAN RIVER BAY, DELAWARE AND THE ADJACENT CONTINENTAL SHELF. (R826945)

    EPA Science Inventory

    The structure of the wind-induced exchange between Indian River Bay, Delaware and the adjacent continental shelf is examined based on current measurements made at the Indian River Inlet which represents the only conduit of exchange between the bay and the coastal ocean. Local ...

  14. Probing biofouling resistant polymer brush surfaces by atomic force microscopy based force spectroscopy.

    PubMed

    Schön, Peter; Kutnyanszky, Edit; ten Donkelaar, Bas; Santonicola, M Gabriella; Tecim, Tugba; Aldred, Nick; Clare, Anthony S; Vancso, G Julius

    2013-02-01

    The protein repellency and biofouling resistance of zwitterionic poly(sulfobetaine methacrylate)(pSBMA) brushes grafted via surface initiated polymerization (SIP) from silicon and glass substrata was assessed using atomic force microscopy (AFM) adherence experiments. Laboratory settlement assays were conducted with cypris larvae of the barnacle Balanus amphitrite. AFM adherence includes the determination of contact rupture forces when AFM probe tips are withdrawn from the substratum. When the surface of the AFM tip is modified, adherence can be assessed with chemical specifity using a method known as chemical force microscopy (CFM). In this study, AFM tips were chemically functionalized with (a) fibronectin- here used as model for a nonspecifically adhering protein - and (b) arginine-glycine-aspartic acid (RGD) peptide motifs covalently attached to poly(methacrylic acid) (PMAA) brushes as biomimics of cellular adhesion receptors. Fibronectin functionalized tips showed significantly reduced nonspecific adhesion to pSBMA-modified substrata compared to bare gold (2.3±0.75 nN) and octadecanethiol (ODT) self-assembled monolayers (1.3±0.75 nN). PMAA and PMAA-RGD modified probes showed no significant adhesion to pSBMA modified silicon substrata. The results gathered through AFM protein adherence studies were complemented by laboratory fouling studies, which showed no adhesion of cypris larvae of Balanus amphitrite on pSBMA. With regard to its unusually high non-specific adsorption to a wide variety of materials the behavior of fibronectin is analogous to the barnacle cyprid temporary adhesive that also binds well to surfaces differing in polarity, charge and free energy. The antifouling efficacy of pSBMA may, therefore, be directly related to the ability of this surface to resist nonspecific protein adsorption. PMID:23138001

  15. An analysis of rumor propagation based on propagation force

    NASA Astrophysics Data System (ADS)

    Zhao, Zhen-jun; Liu, Yong-mei; Wang, Ke-xi

    2016-02-01

    A propagation force is introduced into the analysis of rumor propagation to address uncertainty in the process. The propagation force is portrayed as a fuzzy variable, and a category of new parameters with fuzzy variables is defined. The classic susceptible, infected, recovered (SIR) model is modified using these parameters, a fuzzy reproductive number is introduced into the modified model, and the rationality of the fuzzy reproductive number is illuminated through calculation and comparison. Rumor control strategies are also discussed.

  16. Problem-Based Learning in 9th Grade Chemistry Class: "Intermolecular Forces"

    ERIC Educational Resources Information Center

    Tarhan, Leman; Ayar-Kayali, Hulya; Urek, Raziye Ozturk; Acar, Burcin

    2008-01-01

    This research study aims to examine the effectiveness of a problem-based learning (PBL) on 9th grade students' understanding of intermolecular forces (dipole-dipole forces, London dispersion forces and hydrogen bonding). The student's alternate conceptions about intermolecular bonding and their beliefs about PBL were also measured. Seventy-eight…

  17. Chiral EFT based nuclear forces: achievements and challenges

    NASA Astrophysics Data System (ADS)

    Machleidt, R.; Sammarruca, F.

    2016-08-01

    During the past two decades, chiral effective field theory has become a popular tool to derive nuclear forces from first principles. Two-nucleon interactions have been worked out up to sixth order of chiral perturbation theory and three-nucleon forces up to fifth order. Applications of some of these forces have been conducted in nuclear few- and many-body systems—with a certain degree of success. But in spite of these achievements, we are still faced with great challenges. Among them is the issue of a proper uncertainty quantification of predictions obtained when applying these forces in ab initio calculations of nuclear structure and reactions. A related problem is the order by order convergence of the chiral expansion. We start this review with a pedagogical introduction and then present the current status of the field of chiral nuclear forces. This is followed by a discussion of representative examples for the application of chiral two- and three-body forces in the nuclear many-body system including convergence issues.

  18. 5. VIEW SOUTHWEST, NORTH AND EAST ELEVATIONS Delaware, Lackawanna ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. VIEW SOUTHWEST, NORTH AND EAST ELEVATIONS - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  19. 23. CONTEXTUAL, RAIL CARS IN MU SHED Delaware, Lackawanna ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. CONTEXTUAL, RAIL CARS IN MU SHED - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  20. 6. VIEW NORTHWEST, SOUTH AND EAST ELEVATIONS Delaware, Lackawanna ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW NORTHWEST, SOUTH AND EAST ELEVATIONS - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  1. 16. INTERIOR, NORTH INSPECTION TRACK, FACING WEST Delaware, Lackawanna ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. INTERIOR, NORTH INSPECTION TRACK, FACING WEST - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  2. 10. VIEW SOUTHWEST, LEANTO ALONG NORTH ELEVATION Delaware, Lackawanna ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. VIEW SOUTHWEST, LEAN-TO ALONG NORTH ELEVATION - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  3. 7. VIEW SOUTHEAST, NORTH AND WEST ELEVATIONS Delaware, Lackawanna ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW SOUTHEAST, NORTH AND WEST ELEVATIONS - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  4. 8. VIEW EASTNORTHEAST, SOUTH AND WEST ELEVATIONS Delaware, Lackawanna ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. VIEW EAST-NORTHEAST, SOUTH AND WEST ELEVATIONS - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  5. 13. DETAIL, LATERAL BRACING FOR INTERIOR OVERHEAD CRANE Delaware, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. DETAIL, LATERAL BRACING FOR INTERIOR OVERHEAD CRANE - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  6. 10. Bent under temporary bridge of Delaware, Lackawanna and Western ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Bent under temporary bridge of Delaware, Lackawanna and Western Railroad over Erie at west end of old Bergen Tunnel, taken May 19, 1906 - Erie Railway, Bergen Hill Open Cut, Palisade Avenue to Tonnele Avenue, Jersey City, Hudson County, NJ

  7. 9. Temporary bridge of Delaware, Lackawanna and Western Railroad over ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Temporary bridge of Delaware, Lackawanna and Western Railroad over Erie at west end of old Bergen Tunnel, taken May 19, 1906 - Erie Railway, Bergen Hill Open Cut, Palisade Avenue to Tonnele Avenue, Jersey City, Hudson County, NJ

  8. 2. DELAWARE AVE. (far right, looking north) AND BAINBRIDGE ST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. DELAWARE AVE. (far right, looking north) AND BAINBRIDGE ST. (lower horizontal line) SHOWING SOCIETY HILL TOWERS (upper left, by I.M. Pei) - Independence National Historical Park, Walnut, Sixth, Chestnut & Second Streets, Philadelphia, Philadelphia County, PA

  9. Delaware Anatomy: With Linguistic, Social, and Medical Aspects

    ERIC Educational Resources Information Center

    Miller, Jay

    1977-01-01

    Presents the comprehensive partonomy of anatomy in Unami Lenape or Delaware as provided by a modern Unami specialist. The primary referent is the human body, but some comparative terms referring to animals and plants are also provided. (CHK)

  10. A novel force field parameter optimization method based on LSSVR for ECEPP.

    PubMed

    Liu, Yunling; Tao, Lan; Lu, Jianjun; Xu, Shuo; Ma, Qin; Duan, Qingling

    2011-03-23

    In this paper, we propose a novel force field parameter optimization method based on LSSVR and optimize the torsion energy parameters of ECEPP force field. In this method force field parameter optimization problem is turned into a support vector regression problem. Protein samples for regression model training are chosen from Protein Data Bank. The experiments show that the optimized force-field parameters make both α-helix and β-hairpin structures more consistent with the experimental implications than the original parameters.

  11. High-precision horizontally directed force measurements for high dead loads based on a differential electromagnetic force compensation system

    NASA Astrophysics Data System (ADS)

    Vasilyan, Suren; Rivero, Michel; Schleichert, Jan; Halbedel, Bernd; Fröhlich, Thomas

    2016-04-01

    In this paper, we present an application for realizing high-precision horizontally directed force measurements in the order of several tens of nN in combination with high dead loads of about 10 N. The set-up is developed on the basis of two identical state-of-the-art electromagnetic force compensation (EMFC) high precision balances. The measurement resolution of horizontally directed single-axis quasi-dynamic forces is 20 nN over the working range of  ±100 μN. The set-up operates in two different measurement modes: in the open-loop mode the mechanical deflection of the proportional lever is an indication of the acting force, whereas in the closed-loop mode it is the applied electric current to the coil inside the EMFC balance that compensates deflection of the lever to the offset zero position. The estimated loading frequency (cutoff frequency) of the set-up in the open-loop mode is about 0.18 Hz, in the closed-loop mode it is 0.7 Hz. One of the practical applications that the set-up is suitable for is the flow rate measurements of low electrically conducting electrolytes by applying the contactless technique of Lorentz force velocimetry. Based on a previously developed set-up which uses a single EMFC balance, experimental, theoretical and numerical analyses of the thermo-mechanical properties of the supporting structure are presented.

  12. Ground-water levels in Delaware in 1952

    USGS Publications Warehouse

    Marine, I.W.

    1954-01-01

    In 1943 the towns of Lewes and Rehoboth entered into cooperation with the U.S. Geological Survey in order to study salt-water encroachment in that area. Three observation wells were established, of which one, NI 3, had observations continued on the statewide program in 1952. Cooperation with the town was conducted in 1950. In December 1949 the State of Delaware, through the Agricultural Extension Service of the University of Delaware and the Highway Department, cooperated with the U.S. Geological Survey for the purpose of making of a reconnaissance study of ground water within the State. In the fall of 1950, under the cooperative agreement with the Agricultural Extension Service of the University of Delaware, 13 water-table wells were established for measurement. Beginning July 1, 1951, cooperation transferred to the Delaware Geological Survey of the University of Delaware, and measurement s continued the remainder of the year. Cooperation was also established with the Delaware Geological Survey representing the city of Newark for a detailed study of the Newark area. An additional observation well, Cb 123, was established in the course of this program.

  13. Records available to September 30, 1956, on use of water in the Delaware Basin Project area

    USGS Publications Warehouse

    Kammerer, John C.

    1957-01-01

    year 1955, as compiled or estimated from publications and manuscripts prepared between 1950 and 1956. All quantities are given in millions of gallons per day (mgd). The source of the water used, ground or surface, and the type of use to which is was put -- public supply, industrial supply, irrigation, or rural use -- is given. Use of water for hydroelectric power was not compiled for this report. Most tables in this report do not subdivide withdrawals into fresh and saline water; however, most supplies are fresh, except some of those withdrawn directly from the Delaware River downstream from Philadelphia, Pa. All quantities are expressed as an average rate for a full year and are lower, therefore, than rates resulting from the increased demand for water during the summer for air conditioning and supplemental irrigation. The primary emphasis of this study was to get an over-all picture of water use throughout large parts of the basin. Therefore, publications relating to a dingle city or county, other than New York City, seldom were used; revisions and refinement based on such sources of information are best made by the field personnel most familiar with locally filed publications and published data.

  14. Delaware Estuary situation reports. Emergency response: How do emergency management officials address disasters in the Delaware Estuary

    SciTech Connect

    Sylves, R.T.

    1991-01-01

    From hurricanes and other natural threats to oil spills and other manmade emergencies, the Delaware Estuary has experienced a variety of disasters over the years. The toll that these events take on the estuary and those who live on its shores depends largely upon the degree of emergency preparedness, speed of response, and effectiveness of recovery operations. In Emergency Response: How Do Emergency Management Officials Address Disasters in the Delaware Estuary, the latest addition to its Delaware Estuary Situation Report series, the University of Delaware Sea Grant College Program defines emergency management; examines the roles that the Coast Guard, Army Corps of Engineers, and Environmental Protection Agency play in an emergency; and reviews how each of these federal agencies operated during an actual disaster--the 1985 Grand Eagle oil spill. The report was written by Dr. Richard T. Sylves, a professor of political science at the University of Delaware. Sylves has been studying emergency management for the past 15 years, with special emphasis on oil spill preparedness and response in the Mid-Atlantic Region. The Delaware Estuary Situation Report is 12 pages long and contains maps and photographs, as well as a detailed account of response and recovery operations undertaken during the Grand Eagle oil spill. A comparison of the 1985 Grand Eagle spill and the 1989 Presidente Rivera spill also is included.

  15. Problem decomposition by mutual information and force-based clustering

    NASA Astrophysics Data System (ADS)

    Otero, Richard Edward

    The scale of engineering problems has sharply increased over the last twenty years. Larger coupled systems, increasing complexity, and limited resources create a need for methods that automatically decompose problems into manageable sub-problems by discovering and leveraging problem structure. The ability to learn the coupling (inter-dependence) structure and reorganize the original problem could lead to large reductions in the time to analyze complex problems. Such decomposition methods could also provide engineering insight on the fundamental physics driving problem solution. This work forwards the current state of the art in engineering decomposition through the application of techniques originally developed within computer science and information theory. The work describes the current state of automatic problem decomposition in engineering and utilizes several promising ideas to advance the state of the practice. Mutual information is a novel metric for data dependence and works on both continuous and discrete data. Mutual information can measure both the linear and non-linear dependence between variables without the limitations of linear dependence measured through covariance. Mutual information is also able to handle data that does not have derivative information, unlike other metrics that require it. The value of mutual information to engineering design work is demonstrated on a planetary entry problem. This study utilizes a novel tool developed in this work for planetary entry system synthesis. A graphical method, force-based clustering, is used to discover related sub-graph structure as a function of problem structure and links ranked by their mutual information. This method does not require the stochastic use of neural networks and could be used with any link ranking method currently utilized in the field. Application of this method is demonstrated on a large, coupled low-thrust trajectory problem. Mutual information also serves as the basis for an

  16. Rasch model based analysis of the Force Concept Inventory

    NASA Astrophysics Data System (ADS)

    Planinic, Maja; Ivanjek, Lana; Susac, Ana

    2010-06-01

    The Force Concept Inventory (FCI) is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear measures for persons and items from raw test scores and which can provide important insight in the structure and functioning of the test (how item difficulties are distributed within the test, how well the items fit the model, and how well the items work together to define the underlying construct). The data for the Rasch analysis come from the large-scale research conducted in 2006-07, which investigated Croatian high school students’ conceptual understanding of mechanics on a representative sample of 1676 students (age 17-18 years). The instrument used in research was the FCI. The average FCI score for the whole sample was found to be (27.7±0.4)% , indicating that most of the students were still non-Newtonians at the end of high school, despite the fact that physics is a compulsory subject in Croatian schools. The large set of obtained data was analyzed with the Rasch measurement computer software WINSTEPS 3.66. Since the FCI is routinely used as pretest and post-test on two very different types of population (non-Newtonian and predominantly Newtonian), an additional predominantly Newtonian sample ( N=141 , average FCI score of 64.5%) of first year students enrolled in introductory physics course at University of Zagreb was also analyzed. The Rasch model based analysis suggests that the FCI has succeeded in defining a sufficiently unidimensional construct for each population. The analysis of fit of data to the model found no grossly misfitting items which would degrade measurement. Some items with larger misfit and items with significantly different difficulties in the two samples of students do require further examination

  17. Vandenberg Air Force Base Upper Level Wind Launch Weather Constraints

    NASA Technical Reports Server (NTRS)

    Shafer, Jaclyn A.; Wheeler, Mark M.

    2012-01-01

    The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman III ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The maximum wind speed and 1000-ft shear values for each sounding in each subseason were determined. To accurately calculate the PoV, the AMU determined the theoretical distributions that best fit the maximum wind speed and maximum shear datasets. Ultimately it was discovered that the maximum wind speeds follow a Gaussian distribution while the maximum shear values follow a lognormal distribution. These results were applied when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition to the requirements outlined in the original task plan, the AMU also included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on day of launch. The interactive graphical user interface (GUI) for this project was developed in

  18. Rasch Model Based Analysis of the Force Concept Inventory

    ERIC Educational Resources Information Center

    Planinic, Maja; Ivanjek, Lana; Susac, Ana

    2010-01-01

    The Force Concept Inventory (FCI) is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear…

  19. Dynamic Management of Releases for the Delaware River Basin using NYC's Operations Support Tool

    NASA Astrophysics Data System (ADS)

    Weiss, W.; Wang, L.; Murphy, T.; Muralidhar, D.; Tarrier, B.

    2011-12-01

    The New York City Department of Environmental Protection (DEP) has initiated design of an Operations Support Tool (OST), a state-of-the-art decision support system to provide computational and predictive support for water supply operations and planning. Using an interim version of OST, DEP and the New York State Department of Environmental Conservation (DEC) have developed a provisional, one-year Delaware River Basin reservoir release program to succeed the existing Flexible Flow Management Program (FFMP) which expired on May 31, 2011. The FFMP grew out of the Good Faith Agreement of 1983 among the four Basin states (New York, New Jersey, Pennsylvania, and Delaware) that established modified diversions and flow targets during drought conditions. It provided a set of release schedules as a framework for managing diversions and releases from New York City's Delaware Basin reservoirs in order to support multiple objectives, including water supply, drought mitigation, flood mitigation, tailwaters fisheries, main stem habitat, recreation, and salinity repulsion. The provisional program (OST-FFMP) defines available water based on current Upper Delaware reservoir conditions and probabilistic forecasts of reservoir inflow. Releases are then set based on a set of release schedules keyed to the water availability. Additionally, OST-FFMP attempts to provide enhanced downstream flood protection by making spill mitigation releases to keep the Delaware System reservoirs at a seasonally varying conditional storage objective. The OST-FFMP approach represents a more robust way of managing downstream releases, accounting for predicted future hydrologic conditions by making more water available for release when conditions are forecasted to be wet and protecting water supply reliability when conditions are forecasted to be dry. Further, the dynamic nature of the program allows the release decision to be adjusted as hydrologic conditions change. OST simulations predict that this

  20. Lorentz force velocimetry based on time-of-flight measurements

    NASA Astrophysics Data System (ADS)

    Viré, Axelle; Knaepen, Bernard; Thess, André

    2010-12-01

    Lorentz force velocimetry (LFV) is a contactless technique for the measurement of liquid metal flowrates. It consists of measuring the force acting upon a magnetic system and arising from the interaction between an external magnetic field and the flow of an electrically conducting fluid. In this study, a new design is proposed so as to make the measurement independent of the fluid's electrical conductivity. It is made of one or two coils placed around a circular pipe. The forces produced on each coil are recorded in time as the liquid metal flows through the pipe. It is highlighted that the auto- or cross-correlation of these forces can be used to determine the flowrate. The reliability of the flowmeter is first investigated with a synthetic velocity profile associated with a single vortex ring, which is convected at a constant speed. This configuration is similar to the movement of a solid rod and enables a simple analysis of the flowmeter. Then, the flowmeter is applied to a realistic three-dimensional turbulent flow. In both cases, the influence of the coil radii, coil separation, and sign of the coil-carrying currents is systematically assessed. The study is entirely numerical and uses a second-order finite volume method. Two sets of simulations are performed. First, the equations of motion are solved without accounting for the effect of the magnetic field on the flow (kinematic simulations). Second, the Lorentz force is explicitly added to the momentum balance (dynamic simulations), and the influence of the external magnetic field on the flow is then quantified.

  1. 33 CFR 334.740 - North Shore Choctawhatchee Bay, Eglin Air Force Base, Fla.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Shore Choctawhatchee Bay, Eglin Air Force Base, Fla. (a) The area. The restricted area shall encompass all navigable waters of the United States as defined at 33 CFR part 329 within the area bounded by a..., Eglin Air Force Base, Fla. 334.740 Section 334.740 Navigation and Navigable Waters CORPS OF...

  2. Rigorous force field optimization principles based on statistical distance minimization.

    PubMed

    Vlcek, Lukas; Chialvo, Ariel A

    2015-10-14

    We use the concept of statistical distance to define a measure of distinguishability between a pair of statistical mechanical systems, i.e., a model and its target, and show that its minimization leads to general convergence of the model's static measurable properties to those of the target. We exploit this feature to define a rigorous basis for the development of accurate and robust effective molecular force fields that are inherently compatible with coarse-grained experimental data. The new model optimization principles and their efficient implementation are illustrated through selected examples, whose outcome demonstrates the higher robustness and predictive accuracy of the approach compared to other currently used methods, such as force matching and relative entropy minimization. We also discuss relations between the newly developed principles and established thermodynamic concepts, which include the Gibbs-Bogoliubov inequality and the thermodynamic length. PMID:26472366

  3. Rigorous force field optimization principles based on statistical distance minimization

    SciTech Connect

    Vlcek, Lukas; Chialvo, Ariel A.

    2015-10-14

    We use the concept of statistical distance to define a measure of distinguishability between a pair of statistical mechanical systems, i.e., a model and its target, and show that its minimization leads to general convergence of the model’s static measurable properties to those of the target. We exploit this feature to define a rigorous basis for the development of accurate and robust effective molecular force fields that are inherently compatible with coarse-grained experimental data. The new model optimization principles and their efficient implementation are illustrated through selected examples, whose outcome demonstrates the higher robustness and predictive accuracy of the approach compared to other currently used methods, such as force matching and relative entropy minimization. We also discuss relations between the newly developed principles and established thermodynamic concepts, which include the Gibbs-Bogoliubov inequality and the thermodynamic length.

  4. Low-temperature linear thermal rectifiers based on Coriolis forces.

    PubMed

    Suwunnarat, Suwun; Li, Huanan; Fleischmann, Ragnar; Kottos, Tsampikos

    2016-04-01

    We demonstrate that a three-terminal harmonic symmetric chain in the presence of a Coriolis force, produced by a rotating platform that is used to place the chain, can produce thermal rectification. The direction of heat flow is reconfigurable and controlled by the angular velocity Ω of the rotating platform. A simple three-terminal triangular lattice is used to demonstrate the proposed principle.

  5. Low-temperature linear thermal rectifiers based on Coriolis forces

    NASA Astrophysics Data System (ADS)

    Suwunnarat, Suwun; Li, Huanan; Fleischmann, Ragnar; Kottos, Tsampikos

    2016-04-01

    We demonstrate that a three-terminal harmonic symmetric chain in the presence of a Coriolis force, produced by a rotating platform that is used to place the chain, can produce thermal rectification. The direction of heat flow is reconfigurable and controlled by the angular velocity Ω of the rotating platform. A simple three-terminal triangular lattice is used to demonstrate the proposed principle.

  6. Novel nonlinear knowledge-based mean force potentials based on machine learning.

    PubMed

    Dong, Qiwen; Zhou, Shuigeng

    2011-01-01

    The prediction of 3D structures of proteins from amino acid sequences is one of the most challenging problems in molecular biology. An essential task for solving this problem with coarse-grained models is to deduce effective interaction potentials. The development and evaluation of new energy functions is critical to accurately modeling the properties of biological macromolecules. Knowledge-based mean force potentials are derived from statistical analysis of proteins of known structures. Current knowledge-based potentials are almost in the form of weighted linear sum of interaction pairs. In this study, a class of novel nonlinear knowledge-based mean force potentials is presented. The potential parameters are obtained by nonlinear classifiers, instead of relative frequencies of interaction pairs against a reference state or linear classifiers. The support vector machine is used to derive the potential parameters on data sets that contain both native structures and decoy structures. Five knowledge-based mean force Boltzmann-based or linear potentials are introduced and their corresponding nonlinear potentials are implemented. They are the DIH potential (single-body residue-level Boltzmann-based potential), the DFIRE-SCM potential (two-body residue-level Boltzmann-based potential), the FS potential (two-body atom-level Boltzmann-based potential), the HR potential (two-body residue-level linear potential), and the T32S3 potential (two-body atom-level linear potential). Experiments are performed on well-established decoy sets, including the LKF data set, the CASP7 data set, and the Decoys “R”Us data set. The evaluation metrics include the energy Z score and the ability of each potential to discriminate native structures from a set of decoy structures. Experimental results show that all nonlinear potentials significantly outperform the corresponding Boltzmann-based or linear potentials, and the proposed discriminative framework is effective in developing knowledge-based

  7. SR-71 Tail #844 Landing at Edwards Air Force Base

    NASA Technical Reports Server (NTRS)

    1996-01-01

    With distinctive heat waves trailing behind its engines, NASA Dryden Flight Research Center's SR-71A, tail number 844, lands at the Edwards AFB runway after a 1996 flight. Two SR-71 aircraft have been used by NASA as testbeds for high-speed and high-altitude aeronautical research. The aircraft, an SR-71A and an SR-71B pilot trainer aircraft, have been based here at NASA's Dryden Flight Research Center, Edwards, California. They were transferred to NASA after the U.S. Air Force program was cancelled. As research platforms, the aircraft can cruise at Mach 3 for more than one hour. For thermal experiments, this can produce heat soak temperatures of over 600 degrees Fahrenheit (F). This operating environment makes these aircraft excellent platforms to carry out research and experiments in a variety of areas -- aerodynamics, propulsion, structures, thermal protection materials, high-speed and high-temperature instrumentation, atmospheric studies, and sonic boom characterization. The SR-71 was used in a program to study ways of reducing sonic booms or over pressures that are heard on the ground, much like sharp thunderclaps, when an aircraft exceeds the speed of sound. Data from this Sonic Boom Mitigation Study could eventually lead to aircraft designs that would reduce the 'peak' overpressures of sonic booms and minimize the startling affect they produce on the ground. One of the first major experiments to be flown in the NASA SR-71 program was a laser air data collection system. It used laser light instead of air pressure to produce airspeed and attitude reference data, such as angle of attack and sideslip, which are normally obtained with small tubes and vanes extending into the airstream. One of Dryden's SR-71s was used for the Linear Aerospike Rocket Engine, or LASRE Experiment. Another earlier project consisted of a series of flights using the SR-71 as a science camera platform for NASA's Jet Propulsion Laboratory in Pasadena, California. An upward

  8. Designing virtual science labs for the Islamic Academy of Delaware

    NASA Astrophysics Data System (ADS)

    AlZahrani, Nada Saeed

    Science education is a basic part of the curriculum in modern day classrooms. Instructional approaches to science education can take many forms but hands-on application of theory via science laboratory activities for the learner is common. Not all schools have the resources to provide the laboratory environment necessary for hands-on application of science theory. Some settings rely on technology to provide a virtual laboratory experience instead. The Islamic Academy of Delaware (IAD), a typical community-based organization, was formed to support and meet the essential needs of the Muslim community of Delaware. IAD provides science education as part of the overall curriculum, but cannot provide laboratory activities as part of the science program. Virtual science labs may be a successful model for students at IAD. This study was conducted to investigate the potential of implementing virtual science labs at IAD and to develop an implementation plan for integrating the virtual labs. The literature has shown us that the lab experience is a valuable part of the science curriculum (NBPTS, 2013, Wolf, 2010, National Research Council, 1997 & 2012). The National Research Council (2012) stressed the inclusion of laboratory investigations in the science curriculum. The literature also supports the use of virtual labs as an effective substitute for classroom labs (Babateen, 2011; National Science Teachers Association, 2008). Pyatt and Simms (2011) found evidence that virtual labs were as good, if not better than physical lab experiences in some respects. Although not identical in experience to a live lab, the virtual lab has been shown to provide the student with an effective laboratory experience in situations where the live lab is not possible. The results of the IAD teacher interviews indicate that the teachers are well-prepared for, and supportive of, the implementation of virtual labs to improve the science education curriculum. The investigator believes that with the

  9. Debonding forces of three different customized bases of a lingual bracket system

    PubMed Central

    Sung, Jang-Won; Kwon, Tae-Yub

    2013-01-01

    Objective The purpose of this study was to investigate whether extension of the custom base is necessary for enhancement of bond strength, by comparing the debonding forces and residual adhesives of 3 different lingual bracket systems. Methods A total of 42 extracted upper premolars were randomly divided into 3 groups of 14 each for bonding with brackets having (1) a conventional limited resin custom base; (2) an extended gold alloy custom base: Incognito™; and (3) an extended resin custom base: KommonBase™. The bonding area was measured by scanning the bracket bases with a 3-dimensional digital scanner. The debonding force was measured with an Instron universal testing machine, which applied an occlusogingival shear force. Results The mean debonding forces were 60.83 N (standard deviation [SD] 10.12), 69.29 N (SD 9.59), and 104.35 N (SD17.84) for the limited resin custom base, extended gold alloy custom base, and extended resin custom base, respectively. The debonding force observed with the extended resin custom base was significantly different from that observed with the other bases. In addition, the adhesive remnant index was significantly higher with the extended gold alloy custom base. Conclusions All 3 custom-base lingual brackets can withstand occlusal and orthodontic forces. We conclude that effective bonding of lingual brackets can be obtained without extension of the custom base. PMID:24228238

  10. TIMSS-R 1999: An Analysis of the Delaware Science Coalition Data. TIMSS-R Report.

    ERIC Educational Resources Information Center

    Cwikla, Julie

    This report explores some of the critical issues that have emerged from the data collected from the Third International Mathematics and Science Study-Repeat (TIMSS-R) to inform educational decisions in the state of Delaware. Research questions include Delaware's student performance on the TIMSS-R and the Delaware Student Testing Program (DSTP),…

  11. Planning Delaware's School Needs: Issues of Location, Design, and Infrastructure. Report.

    ERIC Educational Resources Information Center

    Moody, Stephanie; Edgell, David

    This report presents discussion from the 2000 Delaware Policy Forum "Planning Delaware's School Needs: Issues of Location, Design, and Infrastructure," which was held October 12, 2000, in Wyoming, Delaware. The forum brought together representatives of state agencies, including people from the Department of Transportation, the Department of…

  12. 78 FR 4167 - Commercial Wind Lease Issuance on the Atlantic Outer Continental Shelf Offshore Delaware

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-18

    ... Offshore Delaware. SUMMARY: BOEM has issued a commercial wind energy lease to Bluewater Wind Delaware LLC... Bureau of Ocean Energy Management Commercial Wind Lease Issuance on the Atlantic Outer Continental Shelf Offshore Delaware AGENCY: Bureau of Ocean Energy Management (BOEM), Interior. ACTION: Notice...

  13. Annual Report of School Climate and Student Conduct in Delaware Schools: 1999-2000.

    ERIC Educational Resources Information Center

    Beyers, Francine Simmons; Houston, Ronald L.

    This report provides information on the conduct of students in Delaware public schools during the 1999-2000 school year. The focus of the analysis is on reported incidence of serious student conduct offenses as defined by Delaware Code or as defined by Delaware State Board of Education regulations and reported incidence of student suspensions and…

  14. Taconic collision in SE Penna and Delaware

    SciTech Connect

    Crawford, M.L.; Crawford, W.A.; Hoersch, A.L.; Srogi, L.A.; Wagner, M.E.

    1985-01-01

    Taconic metamorphism and tectonism in SE Pennsylvania and northern Delaware were a result of the collision of a volcanic arc with North America. The Wilmington Complex, the infrastructure of the arc, is presently the highest structural unit. It consists of granulite facies volcanogenic sediments intruded by gabbro and a ca. 500 Ma gabbronorite-charnockite suite. Latest Precambrian-earliest Paleozoic sediments of the Glenarm series were metamorphosed to conditions above the second sillimanite isograd beneath the overthrust hot (700-800/sup 0/C) Wilmington Complex. As the edge of the continent was depressed and heated under the advancing thrust complex, basement-involved nappes of Grenville age rocks (Avondale anticline, Woodville dome) with the Glenarm sedimentary cover were thrust over still rigid autochthonous basement (West Chester Prong). On the NW flank of the orogen, Grenville age gneiss-cored massifs (Honey Brook Upland, Mine Ridge, Trenton Prong), unconformably overlain by lower Paleozoic continental shelf sediments, were involved in the thrusting but metamorphosed only to the greenschist facies. Steep anticlines developed later in the Paleozoic, contributing to the present pattern of northeast trending Grenville basement massifs mantled by overlying units.

  15. Estimated use of water in the Delaware River Basin in Delaware, New Jersey, New York, and Pennsylvania, 2010

    USGS Publications Warehouse

    Hutson, Susan S.; Linsey, Kristin S.; Ludlow, Russell A.; Reyes, Betzaida; Shourds, Jennifer L.

    2016-11-07

    The Delaware River Basin (DRB) was selected as a Focus Area Study in 2011 by the U.S. Geological Survey (USGS) as part of the USGS National Water Census. The National Water Census is a USGS research program that focuses on national water availability and use and then develops new water accounting tools and assesses water availability at both the regional and national scales. One of the water management needs that the DRB study addressed, and that was identified by stakeholder groups from the DRB, was to improve the integration of state water use and water-supply data and to provide the compiled water use information to basin users. This water use information was also used in the hydrologic modeling and ecological components of the study.Instream and offstream water use was calculated for 2010 for the DRB based on information received from Delaware, New Jersey, New York, and Pennsylvania. Water withdrawal, interbasin transfers, return flow, and hydroelectric power generation release data were compiled for 11 categories by hydrologic subregion, basin, subbasin, and subwatershed. Data availability varied by state. Site-specific data were used whenever possible to calculate public supply, irrigation (golf courses, nurseries, sod farms, and crops), aquaculture, self-supplied industrial, commercial, mining, thermoelectric, and hydroelectric power withdrawals. Where site-specific data were not available, primarily for crop irrigation, livestock, and domestic use, various techniques were used to estimate water withdrawals.Total water withdrawals in the Delaware River Basin were calculated to be about 7,130 million gallons per day (Mgal/d) in 2010. Calculations of withdrawals by source indicate that freshwater withdrawals were about 4,130 Mgal/d (58 percent of the total) and the remaining 3,000 Mgal/d (42 percent) were from saline water. Total surface-water withdrawals were calculated to be 6,590 Mgal/d, or 92 percent of the total; about 54 percent (3,590 Mgal/d) of surface

  16. Improvements in Correctional HIV Services: A Case Study in Delaware.

    PubMed

    Swan, Holly; O'Connell, Daniel J; Visher, Christy A; Martin, Steven S; Swanson, Karen R; Hernandez, Kristin

    2015-04-01

    This article describes the experience and outcomes of the National Institute on Drug Abuse-funded Criminal Justice Drug Abuse Treatment Studies HIV Services and Treatment Implementation in Corrections protocol in the state of Delaware. The protocol was designed to test the effectiveness of a change team model in improving HIV services in correctional settings. In Delaware, a team was created with representatives from correctional and community agencies to work on improving linkage to HIV care for individuals released from incarceration. The team made improvements in the entire HIV service continuum: linkage to HIV care, HIV education, and HIV testing. The experiences in Delaware and the findings from this study suggest that the use of a change team model is a viable method for making organizational change in correctional settings. PMID:25788611

  17. Educational Program for Scientists and Engineers at the Wright Patterson Air Force Base.

    ERIC Educational Resources Information Center

    Weed, Herman R.; And Others

    The objective of the study was to develop an educational program to update Air Force scientists, engineers, senior technicians and managers of science and engineering (both military and civilian) working at Wright Patterson Air Force Base (WPAFB). Needs in continuing education were assessed from data obtained from: the Office of Professional and…

  18. Surface Roughness Model Based on Force Sensors for the Prediction of the Tool Wear

    PubMed Central

    de Agustina, Beatriz; Rubio, Eva María; Sebastián, Miguel Ángel

    2014-01-01

    In this study, a methodology has been developed with the objective of evaluating the surface roughness obtained during turning processes by measuring the signals detected by a force sensor under the same cutting conditions. In this way, the surface quality achieved along the process is correlated to several parameters of the cutting forces (thrust forces, feed forces and cutting forces), so the effect that the tool wear causes on the surface roughness is evaluated. In a first step, the best cutting conditions (cutting parameters and radius of tool) for a certain quality surface requirement were found for pieces of UNS A97075. Next, with this selection a model of surface roughness based on the cutting forces was developed for different states of wear that simulate the behaviour of the tool throughout its life. The validation of this model reveals that it was effective for approximately 70% of the surface roughness values obtained. PMID:24714391

  19. Surface roughness model based on force sensors for the prediction of the tool wear.

    PubMed

    de Agustina, Beatriz; Rubio, Eva María; Sebastián, Miguel Ángel

    2014-04-04

    In this study, a methodology has been developed with the objective of evaluating the surface roughness obtained during turning processes by measuring the signals detected by a force sensor under the same cutting conditions. In this way, the surface quality achieved along the process is correlated to several parameters of the cutting forces (thrust forces, feed forces and cutting forces), so the effect that the tool wear causes on the surface roughness is evaluated. In a first step, the best cutting conditions (cutting parameters and radius of tool) for a certain quality surface requirement were found for pieces of UNS A97075. Next, with this selection a model of surface roughness based on the cutting forces was developed for different states of wear that simulate the behaviour of the tool throughout its life. The validation of this model reveals that it was effective for approximately 70% of the surface roughness values obtained.

  20. Suspension force control of bearingless permanent magnet slice motor based on flux linkage identification.

    PubMed

    Zhu, Suming; Zhu, Huangqiu

    2015-07-01

    The control accuracy and dynamic performance of suspension force are confined in the traditional bearingless permanent magnet slice motor (BPMSM) control strategies because the suspension force control is indirectly achieved by adopting a closed loop of displacement only. Besides, the phase information in suspension force control relies on accurate measurement of rotor position, making the control system more complex. In this paper, a new suspension force control strategy with displacement and radial suspension force double closed loops is proposed, the flux linkage of motor windings is identified based on voltage-current model and the flexibility of motor control can be improved greatly. Simulation and experimental results show that the proposed suspension force control strategy is effective to realize the stable operation of the BPMSM.

  1. Sensorless Interaction Force Control Based on B-Spline Function for Human-Robot Systems

    NASA Astrophysics Data System (ADS)

    Mitsantisuk, Chowarit; Katsura, Seiichiro; Ohishi, Kiyoshi

    In this paper, to provide precise force sensation of human operator, a twin direct-drive motor system with wire rope mechanism has been developed. The human-robot interaction force and the wire rope tension are independently controlled in acceleration dimension by realizing the dual disturbance observer based on modal space design. In the common mode, it is utilized for control of vibration suppression and wire rope tension. In the differential mode, the purity of human external force with compensation of friction force is obtained. This mode is useful for control of the interaction force of human. Furthermore, the human-robot system that has the ability of support of human interaction force is also proposed. The interaction force generation based on B-spline function is applied to automatically adjust the smooth force command corresponding to the adaptive parameters.
    To analyze the human movement stroke, the multi-sensor scheme is applied to fuse both two motor encoders and acceleration sensor signal by using Kalman filter. From the experimental results, the ability to design different level of assistive force makes it well suited to customized training programs due to time and human movement constraints.

  2. The Sequential Evolution of Universes Based on Fundamental Forces

    NASA Astrophysics Data System (ADS)

    Derow, Catherine Kari

    2015-08-01

    Universes may arise as nature abhors a void. Upon ending of a universe, a new universe forms to fill a new void, forming after perhaps a period of nothingness.The nature of a new universe and the nature of formation, may be related to the nature of the previous universe and the nature of its ending, respectively, e.g., if the end of a universe was prolonged, this might be followed by a short period of nothingness and then an explosive creation of a new universe. Long approach to nothingness and a brief period of nothingness may mean a universe arises quickly and energetically in response to this long latent period of expectancy of void-filling. In terms of order in a universe, order may engender new more ordered universes, until need for chaos means a more chaotic universe arises. Ordered universes may cause new even more ordered universes to atise. The order principle dictates the type of matter organization that arises in universes in series. An ordered universe may have a latent energy of order which leads to a smaller more ordered universe. This minimizes the expectancy of a void, as a smaller more regularly filled void will then ensue in the new universe, until the energy held in by this order is released in the formation of a large much less ordered and slower forming and expanding universe, with more regions of near void. Nature may strive for a build up of intensity of focused order filling an ever- smaller void, averting the void, until the principle of chaos predominates and the energy that this requirement builds causes explosive formation of a large and disordered universe. The need to fill any void that arises and a force that favors a small void arising as void is abhorred and this void being regularly and densely filled competes with the force that favors matter tending towards chaos. These principles governs universes arising in series, until a period of nothingness can prevail until the need to create a void predominates. Nothingness is able to

  3. Contractive tension force stack actuator based on soft dielectric EAP

    NASA Astrophysics Data System (ADS)

    Kovacs, Gabor; Düring, Lukas

    2009-03-01

    Among the electronic polymers EAPs especially the dielectric elastomers are functional materials that have promising potential as muscle-like actuators due to their inherent compliancy and good overall performance. The combination of huge active deformations, high energy densities, good efficiencies and fast response is unique to dielectric elastomers. Furthermore, they are lightweight, have a simple structure and can be easily tailored to various applications. Up to now most scientific research work has been focused on the planar expanding actuation mode due to the fact that the commercially available acrylic material VHB 4910 (3M) can easily be processed to planar actuators and has demonstrated very high actuation performance when pre-strained. Many different actuator designs have been developed and tested which expands in plane when voltage is applied and shrinks back as soon as the applied charges are removed from the electrodes. Obviously the contractive operation mode at activation is required for a wide range of application. Due to the principle of operation of soft DE EAP, mainly two directions to performed work against external loads are possible. Beside of the commonly used expanding actuation in planar direction the contractile actuation in thickness direction of the DE film represents a very promising option in the multilayer configuration. First approaches have been presented by the folded actuator design and by the multilayer tactile display device. In this study a novel approach for active structures driven by soft dielectric EAP is presented, which can perform contractive displacements at external tensile load. The device is composed of an array of equal segments, where the dielectric films are arranged in a pile-up configuration. In order to maintain satisfying structural integrity when external tension load is applied special attention was paid to the compliant electrode design which takes a central importance concerning the force transmission

  4. Distribution and concentration of suspended matter in Delaware Bay

    NASA Technical Reports Server (NTRS)

    Klemas, V. (Principal Investigator); Philpot, W.

    1977-01-01

    The author has identified the following significant results. The problem of remote sensing of suspended matter in water was analyzed in terms of the single-scattering albedo, and a semiempirical relationship between satellite radiance measurements and the concentration of suspended matter in the water was developed. The relationship was tested using data from the 7 July 1973 LANDSAT overpass of Delaware Bay with good results. Suspended sediment concentration maps for the entire Delaware Bay were prepared using radiance values extracted from LANDSAT MSS imagery and correlating them with ground truth samples collected from boats and helicopter.

  5. Application of advanced reservoir characterization, simulation, and production optimization strategies to maximize recovery in slope and basin clastic reservoirs, West Texas (Delaware Basin), Class III

    SciTech Connect

    Dutton, Shirley P.

    2000-07-07

    The objective of this Class 3 project was demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstone's of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost effective way to recover a higher percentage of the original oil in place through strategic placement of infill wells and geologically based field development. Project objectives are divided into two main phases. The original objectives of the reservoir-characterization phase of the project were (1) to provide a detailed understanding of the architecture and heterogeneity of two representative fields of the Delaware Mountain Group, Geraldine Ford and Ford West, which produce from the Bell Canyon and Cherry Canyon Formations, respectively, (2) to chose a demonstration area in one of the fields, and (3) to simulate a CO{sub 2} flood in the demonstration area.

  6. Application of Advanced Reservoir Characterization, Simulation, and Production Optimization Strategies to Maximize Recovery in Slope and Basin Clastic Reservoirs, West Texas (Delaware Basin)

    SciTech Connect

    Dutton, Shirley

    1999-11-09

    The objective of this Class 3 project was demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstones of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost effective way to recover a higher percentage of the original oil in place through strategic placement of infill wells and geologically based field development. Project objectives are divided into two main phases. The original objectives of the reservoir-characterization phase of the project were (1) to provide a detailed understanding of the architecture and heterogeneity of two representative fields of the Delaware Mountain Group, Geraldine Ford and Ford West, which produce from the Bell Canyon and Cherry Canyon Formations, respectively, (2) to chose a demonstration area in one of the fields, and (3) to simulate a CO 2 flood in the demonstration area.

  7. Application of advanced reservoir characterization, simulation, and production optimization strategies to maximize recovery in slope and basin clastic reservoirs, West Texas (Delaware Basin), Class III

    SciTech Connect

    Dutton, Shirley P.; Flanders, William A.; Zirczy, Helena H.

    2000-05-24

    The objective of this Class 3 project was to demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstones of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost effective way to recover a higher percentage of the original oil in place through strategic placement of infill wells and geologically based field development. Phase 1 of the project, reservoir characterization, was completed this year, and Phase 2 began. The project is focused on East Ford field, a representative Delaware Mountain Group field that produces from the upper Bell Canyon Formation (Ramsey sandstone). The field, discovered in 1960, is operated by Oral Petco, Inc., as the East Ford unit. A CO{sub 2} flood is being conducted in the unit, and this flood is the Phase 2 demonstration for the project.

  8. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Satellite Communications Terminal, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  9. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Civil Engineering Storage Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  10. QUALITY MANAGEMENT DURING SELECTION OF TECHNOLOGIES EXAMPLE SITE MARCH AIR FORCE BASE, USA

    EPA Science Inventory

    This paper describes the remedial approach, organizational structure and key elements facilitating effective and efficient remediation of contaminated sites at March Air Force Base (AFB), California. The U.S. implementation and quality assurance approach to site remediation for ...

  11. QUALITY MANAGEMENT DURING SELECTION OF TECHNOLOGIES; EXAMPLE SITE MARCH AIR FORCE BASE, USA

    EPA Science Inventory

    This paper describes the remedial approach, organizational structure and key elements facilitating effective and efficient remediation of contaminated sites at March Air Force Base (AFB), California. The U.S. implementation and quality assurance approach to site remediation for a...

  12. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Microwave Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  13. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    SciTech Connect

    Not Available

    1991-10-01

    This report presents information concerning field procedures employed during the monitoring, well construction, well purging, sampling, and well logging at the Wright-Patterson Air Force Base. Activities were conducted in an effort to evaluate ground water contamination.

  14. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Clean Lubrication Oil Storage Tank & Enclosure, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  15. Dyess Air Force Base, Atlas F Missle Site S8, Launch ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Dyess Air Force Base, Atlas F Missle Site S-8, Launch Control Center (LCC), Approximately 3 miles east of Winters, 500 feet southwest of Highway 17700, northwest of Launch Facility, Winters, Runnels County, TX

  16. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  17. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  18. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Supply Warehouse, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  19. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Electric Substation, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  20. Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Emergency Generator Enclosure, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  1. TEMPORAL GEOPHYSICAL INVESTIGATIONS OF THE FT-2-PLUME AT THE WURTSMITH AIR FORCE BASE, OSCODA, MICHIGAN

    EPA Science Inventory

    The decommissioned Wurtsmith Air Force Base former Fire Training Cell (FT-02) facility has been the focus of several geophysical investigations. After several decades of fire training exercises, significant amounts of hydrocarbons and some solvents seeped into the Subsurface cont...

  2. Temporal Geophysical Investigations of the FT-2-Plume at the Wurtsmith Air Force Base, Oscoda, Michigan

    EPA Science Inventory

    The decommissioned Wurtsmith Air Force Base former Fire Training Cell (FT-02) facility has been the focus of several geophysical investigations. After several decades of fire training exercises, significant amounts of hydrocarbons and some solvents seeped into the subsurface cont...

  3. Superfund Record of Decision (EPA region 3): Delaware City PVC (Polyvinylchloride Resin) Site, New Castle County, Delaware, September 1986. Final report

    SciTech Connect

    Not Available

    1986-09-30

    The Delaware City PVC site is located two miles northwest of Delaware City, New Castle County, Delaware. In 1966 Stauffer Chemical Company (SCC) of Westport, Connecticut, founded the Delaware City PVC Plant, which is used for the manufacturing of polyvinylchloride resin (PVC), polyvinyl acetate, and other polymers. An EPA-conducted inspection in May 1982 indicated serious contamination of the shallow ground water. Currently, ground water, surface water, and soils are contaminated with PVC, benzyl chloride monomer (VCM), TCE, and 1,2-dichloroethane (EDC).

  4. Opioid Exposed Mothers and Infants in Delaware: Clinical and Legal Considerations.

    PubMed

    Savin, Michele K; Paul, David A

    2016-04-01

    Drug use is on the rise in Delaware, as demonstrated by the continued increase in infants born with neonatal abstinence syndrome. Thoughtful, evidence-based, and coordinated approaches are necessary to impact this problem. There is solid evidence that mothers and infants who remain together have improved outcomes. Professional medical and nursing societies are unanimous in support of non-punitive approaches to care. Medical professionals, legislators, and society in general would benefit from ongoing education on the addiction disease process in order to best care for the increasing number of mother/baby dyads with neonatal abstinence syndrome. PMID:27263243

  5. The impact of land and sea surface variations on the Delaware sea breeze at local scales

    NASA Astrophysics Data System (ADS)

    Hughes, Christopher P.

    The summertime climate of coastal Delaware is greatly influenced by the intensity, frequency, and location of the local sea breeze circulation. Sea breeze induced changes in temperature, humidity, wind speed, and precipitation influence many aspects of Delaware's economy by affecting tourism, farming, air pollution density, energy usage, and the strength, and persistence of Delaware's wind resource. The sea breeze front can develop offshore or along the coastline and often creates a near surface thermal gradient in excess of 5°C. The purpose of this dissertation is to investigate the dynamics of the Delaware sea breeze with a focus on the immediate coastline using observed and modeled components, both at high resolutions (~200m). The Weather Research and Forecasting model (version 3.5) was employed over southern Delaware with 5 domains (4 levels of nesting), with resolutions ranging from 18km to 222m, for June 2013 to investigate the sensitivity of the sea breeze to land and sea surface variations. The land surface was modified in the model to improve the resolution, which led to the addition of land surface along the coastline and accounted for recent urban development. Nine-day composites of satellite sea surface temperatures were ingested into the model and an in-house SST forcing dataset was developed to account for spatial SST variation within the inland bays. Simulations, which include the modified land surface, introduce a distinct secondary atmospheric circulation across the coastline of Rehoboth Bay when synoptic offshore wind flow is weak. Model runs using high spatial- and temporal-resolution satellite sea surface temperatures over the ocean indicate that the sea breeze landfall time is sensitive to the SST when the circulation develops offshore. During the summer of 2013 a field campaign was conducted in the coastal locations of Rehoboth Beach, DE and Cape Henlopen, DE. At each location, a series of eleven small, autonomous thermo-sensors (i

  6. Cellular force measurements using single-spaced polymeric microstructures: isolating cells from base substrate

    NASA Astrophysics Data System (ADS)

    Zhao, Yi; Chew Lim, Chee; Sawyer, Douglas B.; Liao, Ronglih; Zhang, Xin

    2005-09-01

    Mechanical force is one of the most important parameters in cellular physiological behavior. To quantify the cellular force locally and more precisely, soft material probes, such as bulk polymeric surfaces or raised individual polymeric structures, have been developed which are deformable by the cell. The extent of deformation and the elastic properties of the probes allow for calculation of the mechanical forces exerted by the cell. Bulk polymeric surfaces have the disadvantage of requiring computational intensive calculations due to the continuous distortion of a large area, and investigators have attempted to address this problem by using raised polymeric structures to simplify the derivation of cellular mechanical force. These studies, however, have ignored the possibility of formation of local adhesions of the cell to the underlying base substrate, which could result in inaccurate cellular force measurements. Clearly, there is a need to develop polymeric structures that can efficiently isolate the cells from the underlying base substrate, in order to eliminate the continuous distortion problem. In this paper, we demonstrate the measurement of cellular force in isolated cardiac myocytes using single-spaced polymeric microstructures. Each structure is 2 µm in diameter and single-spaced packed. This geometry of the structures successfully isolates the cells from the underlying substrate. Displacement of the structures was measured in areas underneath the attached cell and at areas in close proximity to the cell. The results show that the individual structures underneath the cell were significantly displaced whereas no substantial strain in the underlying base substrate was detected. The mechanical force of the cell was derived from the displacements of individual structures upon multiplication with the locally determined spring constant. The force distribution reveals a parallel alignment as well as a periodic motion of the contractile units of the myocyte. The

  7. A micropillar-based on-chip system for continuous force measurement of C. elegans

    NASA Astrophysics Data System (ADS)

    Ghanbari, Ali; Nock, Volker; Johari, Shazlina; Blaikie, Richard; Chen, XiaoQi; Wang, Wenhui

    2012-09-01

    Caenorhabditis elegans is a well-established model organism and has been gaining interest particularly related to worm locomotion and the investigation of the relationship between muscle arms and the motion pattern of the nematode. In this paper, we report on a micropillar-based on-chip system which is capable of quantifying multi-point locomotive forces of a moving C. elegans. A Polydimethylsiloxane (PDMS) device was microfabricated to allow C. elegans to move in a matrix of micropillars in a channel, and an image processing method was developed to resolve the worm force from the bending pillars. The current micropillar-based system is able to measure force with a resolution of 2.07 µN for body width of 80 µm. Initial experiments have been conducted to collect a maximum force level for thirteen wild type worm samples. A maximum force level of 61.94 µN was observed from 1571 data points, based on which an average maximum force level was 32.61 µN for multi-point measurements. The demonstrated capabilities of the system can be an enabling technology that allows biologist to gain a better understanding of subtle force patterns of C. elegans and worm muscle development.

  8. Manual for School Building Commissions of the State of Delaware.

    ERIC Educational Resources Information Center

    Delaware State Dept. of Public Instruction, Dover.

    This manual contains provisions of Delaware state law and recommended procedures for construction programs. Areas discussed include--(1) financing, (2) school construction formulae for space allowances, (3) proposed school building budget, (4) procedures for school building construction, (5) a check list for an accounting system, (6) purchase…

  9. Second Summative Report of the Delaware PLATO Project.

    ERIC Educational Resources Information Center

    Hofstetter, Fred T.

    Begun on an experimental basis in March 1975, the ongoing PLATO project at the University of Delaware has become an established part of the University's academic program. This descriptive report is divided into three sections: (1) project history and development, including organization, utilization, instructor and author training, and projections…

  10. Third Summative Report of the Delaware PLATO Project.

    ERIC Educational Resources Information Center

    Hofstetter, Fred T.

    Descriptions of new developments in the areas of facilities, applications, user services, support staff, research, evaluation, and courseware production since the Second Summative Report (1977) are provided, as well as a summative overview of PLATO applications at the University of Delaware. Through the purchase of its own PLATO system, this…

  11. An Inventory of ESEA Title III Projects, FY 1974 [Delaware].

    ERIC Educational Resources Information Center

    Watson, John S.

    Forty-eight projects funded by the Elementary and Secondary Education Act Title III, and providing the funds to public school districts to demonstrate the feasibility of educational innovations, are the focus of this inventory of ESEA Title III projects for the State of Delaware, fiscal year 1974. Sixteen operating projects are described in Part I…

  12. 15. Photocopy of a photograph in Delaware Department of Transportation ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Photocopy of a photograph in Delaware Department of Transportation files, photographer unknown, about 1970 VIEW OF THE DOWNSTREAM (EAST) SIDE OF BRIDGE 808 AND THE GATES, LOOKING SOUTH TOWARD THE MILL - Wagamon Pond Dam & Bridge, Spanning Broadkill River at State Road No. 197 (Mulberry Street), Milton, Sussex County, DE

  13. 16. Photocopy of a photograph in Delaware Department of Transportation ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Photocopy of a photograph in Delaware Department of Transportation files, photographer unknown, about 1970 VIEW OF BRIDGE 808, LOOKING SOUTH TOWARD THE MILL - Wagamon Pond Dam & Bridge, Spanning Broadkill River at State Road No. 197 (Mulberry Street), Milton, Sussex County, DE

  14. Sex, Lies, and Residence Life: Delaware's Thought Reform

    ERIC Educational Resources Information Center

    Kissel, Adam

    2009-01-01

    The University of Delaware has a zero-tolerance policy for anything remotely resembling "hate speech." As such, the school implemented a mandatory training for all 7,000-odd students in its dorms. The sessions were part of a thorough thought-reform curriculum, designed by the school's Office of Residence Life, psychologically to "treat" and…

  15. 77 FR 73490 - Delaware; Major Disaster and Related Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-10

    ... Disaster Relief and Emergency Assistance Act, 42 U.S.C. 5121 et seq. (the ``Stafford Act''), as follows: I... warrant a major disaster declaration under the Robert T. Stafford Disaster Relief and Emergency Assistance... SECURITY Federal Emergency Management Agency Delaware; Major Disaster and Related Determinations...

  16. Delaware and the Southern Regional Education Board, December 2014

    ERIC Educational Resources Information Center

    Southern Regional Education Board (SREB), 2014

    2014-01-01

    This report details Delaware's participation in Southern Regional Education Board (SREB) programs and services from December 2013 through November 2014. Appropriations from member states support SREB's core operations and general services. SREB leverages the long-standing commitment of member states to attract external funding for an array of…

  17. Nutrient Management Certification for Delaware: Developing a Water Quality Curriculum

    ERIC Educational Resources Information Center

    Hansen, David J.; Binford, Gregory D.

    2004-01-01

    Water quality is a critical environmental, social, and political issue in Delaware. In the late 1990s, a series of events related to water quality issues led to the passage of a state nutrient management law. This new law required nutrient management planning and established a state certification program for nutrient users in the agricultural and…

  18. Factors Influencing School Choice in a School District in Delaware

    ERIC Educational Resources Information Center

    Kennedy, John J., Jr.

    2012-01-01

    The purpose of this descriptive study is to examine the factors that influenced parents in a school district in Delaware when they selected a high school for their child. This study also sought to examine the sources of information that parents used. Also examined was the impact of socio-economic status in the high school selection process. A…

  19. 33 CFR 167.174 - Off Delaware Bay: Precautionary area.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... area. 167.174 Section 167.174 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... Separation Schemes and Precautionary Areas Atlantic East Coast § 167.174 Off Delaware Bay: Precautionary area. A precautionary area is established as follows: from 38°42.80′ N, 74°58.90′ W; then northerly by...

  20. Sand dunes on the central Delmarva Peninsula, Maryland and Delaware

    USGS Publications Warehouse

    Denny, Charles Storrow; Owens, James Patrick

    1979-01-01

    Inconspicuous ancient sand dunes are present in parts of the central Delmarva Peninsula, Maryland and Delaware. Many dunes are roughly V-shaped, built by northwest winds, especially on the east sides of some of the large rivers. On the uplands, the form and spacing of the dunes are variable. A surficial blanket composed mainly of medium and fine-grained sand-the Parsonsburg Sand-forms both the ancient dunes and the broad plains between the dunes. The sand that forms the dunes is massive and intensely burrowed in the upper part; traces of horizontal or slightly inclined bedding appear near the base. Quartz is the dominant mineral constituent of the sand. Microline is abundant in the very fine to fine sand fraction. The heavy-mineral assemblages (high zircon, tourmaline, rutile) are more mature than in most of the possible source rocks. The most abundant minerals in the clay-sized fraction are dioctahedral vermiculite, kaolinite, illite, montmorillonite, and gibbsite. The first four minerals are common in deposits of late Wisconsin and Holocene age. The gibbsite may be detrital, coming from weathered rocks of Tertiary age. The soil profile in the dune sand is weakly to moderately developed. At or near the base of the Parsonsburg Sand are peaty beds that range in age from about 30,000 to about 13,000 radiocarbon years B.P. Microfloral assemblages in the peaty beds suggest that the dunes on the uplands formed in a spruce parkland during the late Wisconsin glacial maximum. The river dunes may also be of late Wisconsin age, but could be Holocene.

  1. Origin of Atlantic Sturgeon collected off the Delaware coast during spring months

    USGS Publications Warehouse

    Wirgin, Isaac; Breece, Matthew W.; Fox, Dewayne A.; Maceda, Lorraine; Wark, Kevin W.; King, Timothy L.

    2015-01-01

    Atlantic Sturgeon Acipenser oxyrinchus oxyrinchus was federally listed under the U.S. Endangered Species Act as five distinct population segments (DPS). Currently, at least 18 estuaries coastwide host spawning populations and the viability of these vary, requiring differing levels of protection. Subadults emigrate from their natal estuaries to marine waters where they are vulnerable to bycatch; one of the major threats to the rebuilding of populations. As a result, identifying the population origin of Atlantic Sturgeon in coastal waters is critical to development of management plans intended to minimize interactions of the most imperiled populations with damaging fisheries. We used mitochondrial DNA control region sequencing and microsatellite DNA analyses to determine the origin of 261 Atlantic Sturgeon collected off the Delaware coast during the spring months. Using individual-based assignment (IBA) testing and mixed stock analysis, we found that specimens originated from all nine of our reference populations and the five DPSs used in the listing determination. Using IBA, we found that the Hudson River population was the largest contributor (38.3%) to our coastal collection. The James (19.9%) and Delaware (13.8%) river populations, at one time thought to be extirpated or nearly so, were the next largest contributors. The three populations combined in the South Atlantic DPS contributed 21% of specimens; the Altamaha River, the largest population in the South Atlantic DPS, only contributed a single specimen to the collection. While the origin of specimens collected on the Delaware coast was most likely within rivers of the New York Bight DPS (52.1%), specimens that originated elsewhere were also well represented. Genetic analyses provide a robust tool to identify the population origin of individual sturgeon outside of their natal estuaries and to determine the quantitative contributions of individual populations to coastal aggregations that are vulnerable to

  2. Flood-prone areas and waterways, Edwards Air Force Base, California

    USGS Publications Warehouse

    Meyer, Robert W.; Bowers, James C.

    2002-01-01

    Edwards Air Force Base (EAFB) is in the Mojave Desert region of southern California. Although the climate in the study area is arid, occasional intense storms result in flooding on the base, damaging roads and buildings. To plan for anticipated development at EAFB, the U.S. Department of the Air Force (USAF) and the U.S. Geological Survey (USGS) began a cooperative study to locate flood-prone areas on the base. This report describes flood hazards and shows flood-prone areas of the base.

  3. Assisting control for attendant propelled wheelchair based on force velocity relationship.

    PubMed

    Suzuki, Tatsuto; Uchiyama, Hironobu; Holloway, Catherine; Tyler, Nick

    2012-01-01

    There is a need to develop an assisting device which can be adapted to the individual capabilities of elderly attendants, which would allow them to maintain a level of fitness when pushing a wheelchair, while minimising the risk of injury to them. Furthermore there is a need to reduce the overall energy consumption of the device in keeping with the current trends of reducing carbon emissions. The control system for attendants pushing wheelchairs that reduces the energy needed by the assisting device is an increasing trend of optimisation of assistive technology devices to individual capabilities to ensure less energy expenditure of the attendant. The control parameters for existing assisting systems for attendant wheelchair propulsion are difficult to optimise for individual capabilities. We focus on the individual propelling performance, and propose an assisting control method based on the force velocity relationship of the individual. Our proposed assisting controller generates an assisting force when the attendant's propelling force exceeds an assisting boundary defined by the force velocity relationship. In this paper, we tested the performance of the assisting controller based on force velocity (FV) relationship using simulation. The simulation used an attendant wheelchair model with parameters determined from experiments. From the simulated results of the assisting force trajectories, the FV assisting system worked as we defined. The FV assisting system used less energy consumption than the existing proportional assisting systems. Also the FV assisting system would have a limit of maximum attendant propelling power, so the distribution between the attendant force and the assisting force can be easily adjusted to the individual's force velocity relationship. Our proposed FV assisting system would be useful as it would allow an optimised system based on individual capabilities to be created for rehabilitation/training systems, which would allow optimum energy

  4. Water resources data, Maryland and Delaware, water year 1997, volume 2. ground-water data

    USGS Publications Warehouse

    Smigaj, Michael J.; Saffer, Richard W.; Starsoneck, Roger J.; Tegeler, Judith L.

    1998-01-01

    The Water Resources Division of the U.S. Geological Survey, in cooperation with State agencies, obtains a large amount of data pertaining to the water resources of Maryland and Delaware each water year. These data, accumulated during many water years, constitute a valuable data base for developing an improved understanding of the water resources of the State. To make these data readily available to interested parties outside the U.S. Geological Survey, the data are published annually in this report series entitled 'Water Resources Data - Maryland and Delaware.' This series of annual reports for Maryland and Delaware began with the 1961 water year with a report that contained only data relating to the quantities of surface water. For the 1964 water year, a similar report was introduced that contained only data relating to water quality. Beginning with the l975 water year, the report format was changed to present, in one volume, data on quantities of surface water, quality of surface and ground water, and ground-water levels. In the 1989 water year, the report format was changed to two volumes. Both volumes contained data on quantities of surface water, quality of surface and ground water, and ground-water levels. Volume 1 contained data on the Atlantic Slope Basins (Delaware River thru Patuxent River) and Volume 2 contained data on the Monongahela and Potomac River basins. Beginning with the 1991 water year, Volume 1 contains all information on quantities of surface water and surface- water-quality data and Volume 2 contains ground-water levels and ground-water-quality data. This report is Volume 2 in our 1998 series and includes records of water levels and water quality of ground-water wells and springs. It contains records for water levels at 397 observation wells, discharge data for 6 springs, and water quality at 107 wells. Location of ground-water level wells are shown on figures 3 and 4. The location for the ground-water-quality sites are shown on figures 5

  5. Distributed forcing of the flow past a blunt-based axisymmetric bluff body

    NASA Astrophysics Data System (ADS)

    Jardin, Thierry; Bury, Yannick; DAEP Team

    2012-11-01

    The topology of bluff body wakes may be highly sensitive to forcing at frequencies close to intrinsic flow instabilities. In a similar way, a steady but spatially varying forcing at wavelengths close to specific flow instabilities can lead to analogous outcomes. Such forcing is commonly referred to as distributed forcing. However, although distributed forcing has proven to be a relevant control strategy for three-dimensional flows past nominally two-dimensional geometries (e.g. extruded circular cylinder at Re > 180), its impact on the flow past nominally three-dimensional geometries is still unknown. Here we assess the receptivity of the flow past a blunt-based axisymmetric bluff body to an azimuthally distributed forcing applied at the periphery of the bluff-body base. We show that the impact of RSPa, RSPb and RSPc instabilities on the drag fluctuations experienced by the bluff body can be suppressed, depending on the forcing wavelengths. The authors acknowledge the French Ministry of Defence and DGA for funding this work.

  6. A force based model of individual cell migration with discrete attachment sites and random switching terms.

    PubMed

    Dallon, J C; Scott, Matthew; Smith, W V

    2013-07-01

    A force based model of cell migration is presented which gives new insight into the importance of the dynamics of cell binding to the substrate. The main features of the model are the focus on discrete attachment dynamics, the treatment of the cellular forces as springs, and an incorporation of the stochastic nature of the attachment sites. One goal of the model is to capture the effect of the random binding and unbinding of cell attachments on global cell motion. Simulations reveal one of the most important factor influencing cell speed is the duration of the attachment to the substrate. The model captures the correct velocity and force relationships for several cell types.

  7. Matlab-based interface for the simultaneous acquisition of force measures and Doppler ultrasound muscular images.

    PubMed

    Ferrer-Buedo, José; Martínez-Sober, Marcelino; Alakhdar-Mohmara, Yasser; Soria-Olivas, Emilio; Benítez-Martínez, Josep C; Martínez-Martínez, José M

    2013-04-01

    This paper tackles the design of a graphical user interface (GUI) based on Matlab (MathWorks Inc., MA), a worldwide standard in the processing of biosignals, which allows the acquisition of muscular force signals and images from a ultrasound scanner simultaneously. Thus, it is possible to unify two key magnitudes for analyzing the evolution of muscular injuries: the force exerted by the muscle and section/length of the muscle when such force is exerted. This paper describes the modules developed to finally show its applicability with a case study to analyze the functioning capacity of the shoulder rotator cuff. PMID:23176896

  8. Influence of carbon curvature on molecular adsorptions in carbon-based materials: a force field approach.

    PubMed

    Kostov, M K; Cheng, H; Cooper, A C; Pez, G P

    2002-09-30

    A general force field methodology is developed for description of molecular interactions in carbon-based materials. The method makes use of existing parameters of potential functions developed for sp(2) and sp(3) carbons and allows accurate representation of molecular forces in curved carbon environment. The potential parameters are explicitly curvature and site dependent. The proposed force field approach was used in molecular dynamics (MD) simulations for hydrogen adsorption in single-walled carbon nanotubes (SWNTs). The results reveal significant nanotube deformations and the calculated energies of adsorption are comparable to the reported experimental heat of adsorption for H2 in SWNTs. PMID:12366059

  9. Sliding mode-based lateral vehicle dynamics control using tyre force measurements

    NASA Astrophysics Data System (ADS)

    Kunnappillil Madhusudhanan, Anil; Corno, Matteo; Holweg, Edward

    2015-11-01

    In this work, a lateral vehicle dynamics control based on tyre force measurements is proposed. Most of the lateral vehicle dynamics control schemes are based on yaw rate whereas tyre forces are the most important variables in vehicle dynamics as tyres are the only contact points between the vehicle and road. In the proposed method, active front steering is employed to uniformly distribute the required lateral force among the front left and right tyres. The force distribution is quantified through the tyre utilisation coefficients. In order to address the nonlinearities and uncertainties of the vehicle model, a gain scheduling sliding-mode control technique is used. In addition to stabilising the lateral dynamics, the proposed controller is able to maintain maximum lateral acceleration. The proposed method is tested and validated on a multi-body vehicle simulator.

  10. Apollo 15 crew receive welcome on arrival at Ellington Air Force Base

    NASA Technical Reports Server (NTRS)

    1971-01-01

    The three Apollo 15 crew receive a welcome on their arrival at Ellington Air Force Base, Houston, Texas, after en eight-hour flight aboard a U.S. Air Force C-141 jet aircraft from Hawaii. Left to right are Astronauts David R. Scott, Alfred M. Worden and James B. Irwin. Members of the astronaut's families identified in picture are left to right, Scott's daughter, Tracy; Worden's father, Merrill Worden; Worden's daughter, Merrill; and Irwin's two daughters, Joy and Jill.

  11. Equinox. A Model for the Natural Science Education Curriculum for the Fifth, Sixth, Seventh, and Eighth Grades in the Delaware Schools.

    ERIC Educational Resources Information Center

    Baker, Thomas M.; Reiher, John F.

    This publication represents a model for the Natural Science Education Curriculum for grades five through eight in Delaware's schools. This guide is meant to serve as a minimal standard for natural science education, but at the same time strives for maximum output of the natural science program. The guide is based on the processes of science…

  12. Numerical Study on the Flow Mechanism of Base Aerodynamic Force Acting on the Vertical Landing Rocket

    NASA Astrophysics Data System (ADS)

    Fujimatsu, Nobuyoshi; Suzuki, Kojiro

    The base flow field of a vertical landing rocket in ground effect is numerically studied to clarify the mechanism of downward force acting on the body. Two characteristic patterns in the pressure distribution on the base surface are successfully captured as observed in the experiments. When the distance between the base and the ground surface is small, vorticies generated in the shear layer of the jet boundary interact with both the ground and base surfaces. The base pressure near the axis of the base is significantly reduced and large downward force appears due to vortical structure in the base region. When the distance is large, the vorticies are convected along the ground surface and the base pressure near the edge of the vehicle base is reduced due to suction of the ambient air. The numerical results indicate that unsteady motion of such vortices plays an important role in formation of the flow patterns described above.

  13. Forward stratigraphic modeling of the Permian of the Delaware Basin

    SciTech Connect

    Qiucheng, Ye; Kerans, C.; Bowman, S.

    1996-12-31

    Permian platform-to-basin strata of the Delaware Basin In west Texas and New Mexico represent one of the world`s most complete, best studied, and most hydrocarbon productive records of this geologic period in the world. This superb marriage of a refined stratigraphic framework and active exploration provided impetus to develop a forward stratigraphic model of this section to better predict the distribution of reservoir and seal relationships. The approximately 30 m.y. interval modeled is composed of 2 km of platform strata and 3 km of basinal strata divided into 8 composite sequences (average 3 m.y. duration) and 45 high-frequency sequences (400 ky m.y. duration). A 130 km dip section through the basin margin Guadalupe/Deleware Mountain outcrop is inversely modeled to derive local tectonic subsidence and a sea level curve for the Permian. In this process, the highest and lowest shoreline positions of each sequence are interpreted based on facies description which are assumed to approximate the highest and lowest relative sea level. A eustatic sea level curve is calculated by restoring these shoreline positions and removing local tectonic subsidence using a polynomial fit to the derived relative sea level curve. The quantitatively constrained curve for the Permian contains 2nd, 3rd, and 4th order 180m. This quantitatively constrained accommodation history (calculated eustatic curve and subsidence history) are input into the PHIL forward modeling program. Model variables of sediment supply are depositional system are adjusted to match known outcrop relations. The resulting model is potentially capable of predicting stratigraphy elsewhere in the basin using only subsidence history data from the inverse model.

  14. Forward stratigraphic modeling of the Permian of the Delaware Basin

    SciTech Connect

    Qiucheng, Ye; Kerans, C.; Bowman, S. )

    1996-01-01

    Permian platform-to-basin strata of the Delaware Basin In west Texas and New Mexico represent one of the world's most complete, best studied, and most hydrocarbon productive records of this geologic period in the world. This superb marriage of a refined stratigraphic framework and active exploration provided impetus to develop a forward stratigraphic model of this section to better predict the distribution of reservoir and seal relationships. The approximately 30 m.y. interval modeled is composed of 2 km of platform strata and 3 km of basinal strata divided into 8 composite sequences (average 3 m.y. duration) and 45 high-frequency sequences (400 ky m.y. duration). A 130 km dip section through the basin margin Guadalupe/Deleware Mountain outcrop is inversely modeled to derive local tectonic subsidence and a sea level curve for the Permian. In this process, the highest and lowest shoreline positions of each sequence are interpreted based on facies description which are assumed to approximate the highest and lowest relative sea level. A eustatic sea level curve is calculated by restoring these shoreline positions and removing local tectonic subsidence using a polynomial fit to the derived relative sea level curve. The quantitatively constrained curve for the Permian contains 2nd, 3rd, and 4th order 180m. This quantitatively constrained accommodation history (calculated eustatic curve and subsidence history) are input into the PHIL forward modeling program. Model variables of sediment supply are depositional system are adjusted to match known outcrop relations. The resulting model is potentially capable of predicting stratigraphy elsewhere in the basin using only subsidence history data from the inverse model.

  15. 33 CFR 334.630 - Tampa Bay south of MacDill Air Force Base, Fla.; small-arms firing range and aircraft jettison, U...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Force Base, Fla.; small-arms firing range and aircraft jettison, U.S. Air Force, MacDill Air Force Base... Force Base, Fla.; small-arms firing range and aircraft jettison, U.S. Air Force, MacDill Air Force Base...″, longitude 82°33′02.44″; and thence to a point on the shore line of MacDill Air Force Base at latitude...

  16. 33 CFR 334.630 - Tampa Bay south of MacDill Air Force Base, Fla.; small-arms firing range and aircraft jettison, U...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Force Base, Fla.; small-arms firing range and aircraft jettison, U.S. Air Force, MacDill Air Force Base... Force Base, Fla.; small-arms firing range and aircraft jettison, U.S. Air Force, MacDill Air Force Base...″, longitude 82°33′02.44″; and thence to a point on the shore line of MacDill Air Force Base at latitude...

  17. 33 CFR 334.630 - Tampa Bay south of MacDill Air Force Base, Fla.; small-arms firing range and aircraft jettison, U...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Force Base, Fla.; small-arms firing range and aircraft jettison, U.S. Air Force, MacDill Air Force Base... Force Base, Fla.; small-arms firing range and aircraft jettison, U.S. Air Force, MacDill Air Force Base...″, longitude 82°33′02.44″; and thence to a point on the shore line of MacDill Air Force Base at latitude...

  18. High precision deflection measurement of microcantilever in an optical pickup head based atomic force microscopy

    SciTech Connect

    Lee, Sang Heon

    2012-11-15

    This paper presents the methodology to measure the precise deflection of microcantilever in an optical pickup head based atomic force microscopy. In this paper, three types of calibration methods have been proposed: full linearization, sectioned linearization, and the method based on astigmatism. In addition, the probe heads for easy calibration of optical pickup head and fast replacement of optical pickup head have been developed. The performances of each method have been compared through a set of experiments and constant height mode operation which was not possible in the optical pickup head based atomic force microscopy has been carried out successfully.

  19. Base-flow data in the Arnold Air Force Base area, Tennessee, June and October 2002

    USGS Publications Warehouse

    Robinson, John A.; Haugh, Connor J.

    2004-01-01

    Arnold Air Force Base (AAFB) occupies about 40,000 acres in Coffee and Franklin Counties, Tennessee. The primary mission of AAFB is to support the development of aerospace systems. This mission is accomplished through test facilities at Arnold Engineering Development Center (AEDC), which occupies about 4,000 acres in the center of AAFB. Base-flow data including discharge, temperature, and specific conductance were collected for basins in and near AAFB during high base-flow and low base-flow conditions. Data representing high base-flow conditions from 109 sites were collected on June 3 through 5, 2002, when discharge measurements at sites with flow ranged from 0.005 to 46.4 ft3/s. Data representing low base-flow conditions from 109 sites were collected on October 22 and 23, 2002, when discharge measurements at sites with flow ranged from 0.02 to 44.6 ft3/s. Discharge from the basin was greater during high base-flow conditions than during low base-flow conditions. In general, major tributaries on the north side and southeastern side of the study area (Duck River and Bradley Creek, respectively) had the highest flows during the study. Discharge data were used to categorize stream reaches and sub-basins. Stream reaches were categorized as gaining, losing, wet, dry, or unobserved for each base-flow measurement period. Gaining stream reaches were more common during the high base-flow period than during the low base-flow period. Dry stream reaches were more common during the low base-flow period than during the high base-flow period. Losing reaches were more predominant in Bradley Creek and Crumpton Creek. Values of flow per square mile for the study area of 0.55 and 0.37 (ft3/s)/mi2 were calculated using discharge data collected on June 3 through 5, 2002, and October 22 and 23, 2002, respectively. Sub-basin areas with surplus or deficient flow were defined within the basin. Drainage areas for each stream measurement site were delineated and measured from topographic maps

  20. Distributed forcing of the flow past a blunt-based axisymmetric bluff body

    NASA Astrophysics Data System (ADS)

    Jardin, Thierry; Bury, Yannick

    2014-06-01

    In this paper, we address the influence of a blowing-/suction-type distributed forcing on the flow past a blunt-based axisymmetric bluff body by means of direct numerical simulations. The forcing is applied via consecutive blowing and suction slots azimuthally distributed along the trailing edge of the bluff body. We examine the impact of the forcing wavelength, amplitude and waveform on the drag experienced by the bluff body and on the occurrence of the reflectional symmetry preserving and reflectional symmetry breaking wake modes, for Reynolds numbers 800 and 1,000. We show that forcing the flow at wavelengths inherent to the unforced flow drastically damps drag oscillations associated with the vortex shedding and vorticity bursts, up to their complete suppression. The overall parameter analysis suggests that this damping results from the surplus of streamwise vorticity provided by the forcing that tends to stabilize the ternary vorticity lobes observed at the aft part of the bluff body. In addition, conversely to a blowing-type or suction-type forcing, the blowing-/suction-type forcing involves strong nonlinear interactions between locally decelerated and accelerated regions, severely affecting both the mean drag and the frequencies representative of the vortex shedding and vorticity bursts.

  1. Experimental study of frost heaving force based on transient shock response using piezoceramic sensors

    NASA Astrophysics Data System (ADS)

    Wang, Ruolin; Peng, Tongxiao; Wang, Ming L.

    2016-04-01

    In seasonally frozen soil regions, the frost heaving problem made it difficult to monitor or evaluate the pile safety for long term. So far, no mature tool can be utilized to monitor the frost heaving force, which was unevenly distributed along the pile. In this paper, a piezoceramic sensing based transient excitation response approach was proposed to monitor the frost heaving force in real time. Freeze-thaw cycles can result in great changes of soil engineering properties, including the frost heaving force. So, the freeze-thaw cycle was repeated fourth to study its effect. In the experiment, transient horizontal shock on the top of the pile will be detected by the 6 PZT sensors glued on the pile. The signal data received by the 6 PZT sensors can be used to illustrate the frost heaving force distribution along the pile. Moisture content effect is also one of the important reasons that cause the variation of soil mechanical properties. So three different moisture content (6%, 12%, 18%) testing soil were used in this experiment to detect the variance of the frost heaving force. An energy indicator was developed to quantitatively evaluate the frost heaving force applied on the pile. The experimental results showed that the proposed method was effective in monitoring the uneven distribution of frost heaving force along the pile.

  2. Testing a Non-Competency Inservice Education Model Based on Humanistic or Third Force Psychology

    ERIC Educational Resources Information Center

    Beck, William

    1978-01-01

    The investigation of the impact of the "growth" approach, based on humanistic or Third Force psychology, involved developing a "growth" model based on humanistic psychology, pilot "testing" the model, and drawing implications regarding the model's potential for inservice education. The data indicated that the "growth" approach to inservice…

  3. 77 FR 5781 - Record of Decision for the Air Space Training Initiative Shaw Air Force Base, South Carolina...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF DEFENSE Department of the Air Force Record of Decision for the Air Space Training Initiative Shaw Air Force Base... Training Initiative Shaw Air Force Base, South Carolina Final Environmental Impact Statement (EIS). The...

  4. Development of a quartz tuning-fork-based force sensor for measurements in the tens of nanoNewton force range during nanomanipulation experiments

    SciTech Connect

    Oiko, V. T. A. Rodrigues, V.; Ugarte, D.; Martins, B. V. C.; Silva, P. C.

    2014-03-15

    Understanding the mechanical properties of nanoscale systems requires new experimental and theoretical tools. In particular, force sensors compatible with nanomechanical testing experiments and with sensitivity in the nN range are required. Here, we report the development and testing of a tuning-fork-based force sensor for in situ nanomanipulation experiments inside a scanning electron microscope. The sensor uses a very simple design for the electronics and it allows the direct and quantitative force measurement in the 1–100 nN force range. The sensor response is initially calibrated against a nN range force standard, as, for example, a calibrated Atomic Force Microscopy cantilever; subsequently, applied force values can be directly derived using only the electric signals generated by the tuning fork. Using a homemade nanomanipulator, the quantitative force sensor has been used to analyze the mechanical deformation of multi-walled carbon nanotube bundles, where we analyzed forces in the 5–40 nN range, measured with an error bar of a few nN.

  5. Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces.

    PubMed

    Engelhardt, Christoph; Malfroy Camine, Valérie; Ingram, David; Müllhaupt, Philippe; Farron, Alain; Pioletti, Dominique; Terrier, Alexandre

    2015-01-01

    The estimation of muscle forces in musculoskeletal shoulder models is still controversial. Two different methods are widely used to solve the indeterminacy of the system: electromyography (EMG)-based methods and stress-based methods. The goal of this work was to evaluate the influence of these two methods on the prediction of muscle forces, glenohumeral load and joint stability after total shoulder arthroplasty. An EMG-based and a stress-based method were implemented into the same musculoskeletal shoulder model. The model replicated the glenohumeral joint after total shoulder arthroplasty. It contained the scapula, the humerus, the joint prosthesis, the rotator cuff muscles supraspinatus, subscapularis and infraspinatus and the middle, anterior and posterior deltoid muscles. A movement of abduction was simulated in the plane of the scapula. The EMG-based method replicated muscular activity of experimentally measured EMG. The stress-based method minimised a cost function based on muscle stresses. We compared muscle forces, joint reaction force, articular contact pressure and translation of the humeral head. The stress-based method predicted a lower force of the rotator cuff muscles. This was partly counter-balanced by a higher force of the middle part of the deltoid muscle. As a consequence, the stress-based method predicted a lower joint load (16% reduced) and a higher superior-inferior translation of the humeral head (increased by 1.2 mm). The EMG-based method has the advantage of replicating the observed cocontraction of stabilising muscles of the rotator cuff. This method is, however, limited to available EMG measurements. The stress-based method has thus an advantage of flexibility, but may overestimate glenohumeral subluxation.

  6. Vision-based force measurement using neural networks for biological cell microinjection.

    PubMed

    Karimirad, Fatemeh; Chauhan, Sunita; Shirinzadeh, Bijan

    2014-03-21

    This paper presents a vision-based force measurement method using an artificial neural network model. The proposed model is used for measuring the applied load to a spherical biological cell during micromanipulation process. The devised vision-based method is most useful when force measurement capability is required, but it is very challenging or even infeasible to use a force sensor. Artificial neural networks in conjunction with image processing techniques have been used to estimate the applied load to a cell. A bio-micromanipulation system capable of force measurement has also been established in order to collect the training data required for the proposed neural network model. The geometric characterization of zebrafish embryos membranes has been performed during the penetration of the micropipette prior to piercing. The geometric features are extracted from images using image processing techniques. These features have been used to describe the shape and quantify the deformation of the cell at different indentation depths. The neural network is trained by taking the visual data as the input and the measured corresponding force as the output. Once the neural network is trained with sufficient number of data, it can be used as a precise sensor in bio-micromanipulation setups. However, the proposed neural network model is applicable for indentation of any other spherical elastic object. The results demonstrate the capability of the proposed method. The outcomes of this study could be useful for measuring force in biological cell micromanipulation processes such as injection of the mouse oocyte/embryo. PMID:24411067

  7. Vision-based force measurement using neural networks for biological cell microinjection.

    PubMed

    Karimirad, Fatemeh; Chauhan, Sunita; Shirinzadeh, Bijan

    2014-03-21

    This paper presents a vision-based force measurement method using an artificial neural network model. The proposed model is used for measuring the applied load to a spherical biological cell during micromanipulation process. The devised vision-based method is most useful when force measurement capability is required, but it is very challenging or even infeasible to use a force sensor. Artificial neural networks in conjunction with image processing techniques have been used to estimate the applied load to a cell. A bio-micromanipulation system capable of force measurement has also been established in order to collect the training data required for the proposed neural network model. The geometric characterization of zebrafish embryos membranes has been performed during the penetration of the micropipette prior to piercing. The geometric features are extracted from images using image processing techniques. These features have been used to describe the shape and quantify the deformation of the cell at different indentation depths. The neural network is trained by taking the visual data as the input and the measured corresponding force as the output. Once the neural network is trained with sufficient number of data, it can be used as a precise sensor in bio-micromanipulation setups. However, the proposed neural network model is applicable for indentation of any other spherical elastic object. The results demonstrate the capability of the proposed method. The outcomes of this study could be useful for measuring force in biological cell micromanipulation processes such as injection of the mouse oocyte/embryo.

  8. A Large Area Tactile Sensor Patch Based on Commercial Force Sensors

    PubMed Central

    Vidal-Verdú, Fernando; Barquero, Maria Jose; Castellanos-Ramos, Julián; Navas-González, Rafael; Sánchez, Jose Antonio; Serón, Javier; García-Cerezo, Alfonso

    2011-01-01

    This paper reports the design of a tactile sensor patch to cover large areas of robots and machines that interact with human beings. Many devices have been proposed to meet such a demand. These realizations are mostly custom-built or developed in the lab. The sensor of this paper is implemented with commercial force sensors. This has the benefit of a more foreseeable response of the sensor if its behavior is understood as the aggregation of readings from all the individual force sensors in the array. A few reported large area tactile sensors are also based on commercial sensors. However, the one in this paper is the first of this kind based on the use of polymeric commercial force sensing resistors (FSR) as unit elements of the array or tactels, which results in a robust sensor. The paper discusses design issues related to some necessary modifications of the force sensor, its assembly in an array, and the signal conditioning. The patch has 16 × 9 force sensors mounted on a flexible printed circuit board with a spatial resolution of 18.5 mm. The force range of a tactel is 6 N and its sensitivity is 0.6 V/N. The array is read at a rate of 78 frames per second. Finally, two simple application examples are also carried out with the sensor mounted on the forearm of a rescue robot that communicates with the sensor through a CAN bus. PMID:22163910

  9. Finite Element Method Based Modeling for Prediction of Cutting Forces in Micro-end Milling

    NASA Astrophysics Data System (ADS)

    Pratap, Tej; Patra, Karali

    2016-04-01

    Micro-end milling is one of the widely used processes for producing micro features/components in micro-fluidic systems, biomedical applications, aerospace applications, electronics and many more fields. However in these applications, the forces generated in the micro-end milling process can cause tool vibration, process instability and even cause tool breakage if not minimized. Therefore, an accurate prediction of cutting forces in micro-end milling is essential. In this work, a finite element method based model is developed using ABAQUS/Explicit 6.12 software for prediction of cutting forces in micro-end milling with due consideration of tool edge radius effect, thermo-mechanical properties and failure parameters of the workpiece material including friction behaviour at tool-chip interface. Experiments have been performed for manufacturing of microchannels on copper plate using 500 µm diameter tungsten carbide micro-end mill and cutting forces are acquired through a dynamometer. Predicted cutting forces in feed and cross feed directions are compared with experimental results and are found to be in good agreements. Results also show that FEM based simulations can be applied to analyze size effects of specific cutting forces in micro-end milling process.

  10. Reciprocity-based experimental determination of dynamic forces and moments: A feasibility study

    NASA Technical Reports Server (NTRS)

    Ver, Istvan L.; Howe, Michael S.

    1994-01-01

    BBN Systems and Technologies has been tasked by the Georgia Tech Research Center to carry Task Assignment No. 7 for the NASA Langley Research Center to explore the feasibility of 'In-Situ Experimental Evaluation of the Source Strength of Complex Vibration Sources Utilizing Reciprocity.' The task was carried out under NASA Contract No. NAS1-19061. In flight it is not feasible to connect the vibration sources to their mounting points on the fuselage through force gauges to measure dynamic forces and moments directly. However, it is possible to measure the interior sound field or vibration response caused by these structureborne sound sources at many locations and invoke principle of reciprocity to predict the dynamic forces and moments. The work carried out in the framework of Task 7 was directed to explore the feasibility of reciprocity-based measurements of vibration forces and moments.

  11. Micropipet-based pico force transducer: in depth analysis and experimental verification.

    PubMed Central

    Simson, D A; Ziemann, F; Strigl, M; Merkel, R

    1998-01-01

    Measurements of forces in the piconewton range are very important for the study of molecular adhesion and mechanics. Recently, a micropipet-based force transducer for this type of experiment was presented (E. Evans, K. Ritchie, and R. Merkel, 1995, Biophys. J., 68:2580-2587). In the present article we give a detailed mechanical analysis of this transducer, including nonlinear effects. An analytical expression for the transducer stiffness at small elongations is given. Using magnetic tweezers (F. Ziemann, J. Rädler, and E. Sackmann, 1994, Biophys. J., 66:2210-2216), we were able to determine the force displacement relation of this transducer experimentally. Forces from approximately 10 pN to 500 pN were applied. Theoretical predictions and experimental results coincide remarkably well. PMID:9545067

  12. Geologic framework of the offshore region adjacent to Delaware

    USGS Publications Warehouse

    Benson, R.N.; Roberts, J.H.

    1989-01-01

    Several multichannel, common depth point (CDP) seismic reflection profiles concentrated in the area of the entrance to Delaware Bay provide a tie between the known onshore geology of the Coastal Plain of Delaware and the offshore geology of the Baltimore Canyon Trough. The data provide a basis for understanding the geologic framework and petroleum resource potential of the area immediately offshore Delaware. Our research has focused on buried early Mesozoic rift basins and their geologic history. Assuming that the buried basins are analogous to the exposed Newark Supergroup basins of Late Triassic-Early Jurassic age, the most likely possibility for occurrence of hydrocarbon source beds in the area of the landward margin of the Baltimore Canyon Trough is presumed to be lacustrine, organic-rich shales probably present in the basins. Although buried basins mapped offshore Delaware are within reach of drilling, no holes have been drilled to date; therefore, direct knowledge of source, reservoir, and sealing beds is absent. Buried rift basins offshore Delaware show axial trends ranging from NW-SE to NNE-SSW. Seismic reflection profiles are too widely spaced to delineate basin boundaries accurately. Isopleths of two-way travel time representing basin fill suggest that, structurally, the basins are grabens and half-grabens. As shown on seismic reflection profiles, bounding faults of the basins intersect or merge with low-angle fault surfaces that cut the pre-Mesozoic basement. The rift basins appear to have formed by Mesozoic extension that resulted in reverse motion on reactivated basement thrust faults that originated from compressional tectonics during the Paleozoic. Computer-plotted structure contour maps derived from analysis of seismic reflection profiles provide information on the burial history of the rift basins. The postrift unconformity bevels the rift basins and, in the offshore area mapped, ranges from 2000 to 12,000 m below present sea level. The oldest

  13. Variations in cementation exponent (m) and fracture porosity, Permian Delaware Mountain Group sandstones, Reeves and Culberson counties, Texas

    SciTech Connect

    Thomerson, M.D.; Arnold, M.D.; Asquith, G.B. )

    1994-03-01

    To calculate accurate volumetric oil reserves in the Permian Delaware Mountain Group, reliable values for cementation exponent (m) are required in addition to the other reservoir parameters. The porosity in these siltstone and very fine-grain sandstone reservoirs is intergranular and therefore the cementation exponent should be approximately 2.0. However, crossplots of core derived porosity vs. the formation resistivity factor (Fr) indicate an average cementation exponent (m) of 1.80. the lower cementation exponent is a result of minor amounts of fracture porosity. Comparison of the Delaware Mountain Group porosity vs. the Fr crossplot with the laboratory data of Rasmus (1987), reveals a similar decrease in Fr with a decrease in porosity due to the presence of a 1% fracture porosity. The lower cementation exponent (1.80) results in the calculation of substantially lower water saturations, which increases the amount of volumetric oil reserves. Analysis of three zones in the Bell Canyon and Cherry Canyon formations of the Delaware Mountain Group using standard methods of calculating water saturation resulted in volumetric oil reserves (based on 40 ac drainage) of 1.37 to 1.42 million bbl. However, using a cementation exponent of 1.80 resulted in volumetric oil reserves of 1.55 million bbl. The 9% to 13% increase in volumetric oil reserves from only three zones in the Bell Canyon and Cherry Canyon formations illustrates the critical importance of combining core analysis with log analysis when doing volumetric reserve calculations.

  14. Abundance of adult horseshoe crabs (Limulus polylphemus) in Delaware Bay estimated from a bay-wide mark-recapture study

    USGS Publications Warehouse

    Smith, D.R.; Millard, M.J.; Eyler, S.

    2006-01-01

    Estimates of the abundance of American horseshoe crabs (Limulus polyphemus) are important to determine egg production and to manage populations for the energetic needs of shorebirds that feed on horseshoe crab eggs. In 2003, over 17,500 horseshoe crabs were tagged and released throughout Delaware Bay, and recaptured crabs came from spawning surveys that were conducted during peak spawning. We used two release cohorts to test for a temporary effect of tagging on spawning behavior and we adjusted the number of releases according to relocation rates from a telemetry study. The abundance estimate was 20 million horseshoe crabs (90% confidence interval: 13-28 million), of which 6.25 million (90% CI: 4.0-8.8 million) were females. The combined harvest rate for Delaware, New Jersey, Virginia, and Maryland in 2003 was 4% (90% CI: 3-6%) of the abundance estimate. Over-wintering of adults in Delaware Bay could explain, in part, differences in estimates from ocean-trawl surveys. Based on fecundity of 88,000 eggs per female, egg production was 5.5??1011 (90% CI: 3.5??1011, 7.7??1011), but egg availability for shorebirds also depended on overlap between horseshoe crab and shorebird migrations, density-dependent bioturbation, and wave-mediated vertical transport.

  15. Carbon Monoxide Photoproduction from Particles and Solutes in the Delaware Estuary under Contrasting Hydrological Conditions.

    PubMed

    Song, Guisheng; Richardson, John D; Werner, James P; Xie, Huixiang; Kieber, David J

    2015-12-15

    Full-spectrum, ultraviolet (UV), and visible broadband apparent quantum yields (AQYs) for carbon monoxide (CO) photoproduction from chromophoric dissolved organic matter (CDOM) and particulate organic matter (POM) were determined in the Delaware Estuary in two hydrologically contrasting seasons in 2012: an unusually low flow in August and a storm-driven high flow in November. Average AQYs for CDOM and POM in November were 10 and 16 times the corresponding AQYs in August. Maximum AQYs in November occurred in a midestuary particle absorption maximum zone. Although POM AQYs were generally smaller than CDOM AQYs, the ratio of the former to the latter increased substantially from the UV to the visible. In both seasons, UV solar radiation was the primary driver for CO photoproduction from CDOM whereas visible light was the principal contributor to POM-based CO photoproduction. CDOM dominated CO photoproduction in the uppermost water layer while POM prevailed at deeper depths. On a depth-integrated basis, the Delaware Estuary shifted from a CDOM-dominated system in August to a POM-dominated system in November with respect to CO photoproduction. This study reveals that flood events may enhance photochemical cycling of terrigenous organic matter and switch the primary photochemical driver from CDOM to POM. PMID:26506215

  16. Contamination in Chesapeake Bay and Delaware Estuary: Results from the NOAA NS and T program

    SciTech Connect

    Valette-Silver, N.J.; Daskalakis, K.D.; Velinsky, D.J.

    1994-12-31

    Since 1986, the NOAA National Status and Trends Program through its Mussel Watch Project has been collecting and analyzing sediments and bivalves (oysters and mussels) at about 350 sites distributed around the United States. Since 1984, sediments where also collected and analyzed through the Benthic Surveillance Project. The data used for the sediments include most of the data previously available as well as the NOAA newly developed COSED data base. The analysis includes 17 trace metals and over 70 organic compounds. When comparing the results obtained for the bivalves collected in the Chesapeake Bay and the Delaware Estuary to those obtained in the rest of the United States, it appears that the concentrations of Cd in Chesapeake and Cd, Ni, and total DDT in Delaware Estuary, are high. In an effort to understand the reasons for these high concentrations, the authors compared bivalves and sediments data in relation to the various inputs (including river transport, point source, urban runoff and atmospheric deposition) to these estuarine systems. From this study, it appears that depending on the compound and on the location, natural and/or anthropogenic inputs are responsible for the observed concentrations. For example, in Chesapeake Bay, urban runoff and riverine transport appear to play major roles.

  17. Oyster mortality in Delaware Bay: Impacts and recovery from Hurricane Irene and Tropical Storm Lee

    NASA Astrophysics Data System (ADS)

    Munroe, D.; Tabatabai, A.; Burt, I.; Bushek, D.; Powell, E. N.; Wilkin, J.

    2013-12-01

    One predicted consequence of climate change is increasing variability of local weather extremes such as the frequency and intensity of storms. In August and September of 2011, Hurricane Irene and Tropical Storm Lee generated extreme flooding in the Delaware River watershed that produced prolonged baywide low salinity and consequent historically-high mortalities for the oyster stock in the upper reaches of Delaware Bay. The dynamics, consequences, and projections for recovery from the anomalously high oyster mortality that occurred as a consequence are reported using a combination of physical modeling, field sampling, and metapopulation dynamics modeling. Monthly mortality of 10% and 55% on the upper bay beds (Arnolds and Hope Creek respectively) exceeded the longer-term average at those locations and was associated with a continuous low salinity (<7) exposure of greater than 20 days. Population recovery projections based on metapopulation modeling suggests that recovery will take approximately 10 years for the uppermost beds. Clear understanding of the circumstances leading to this high population-level impact on oysters is important because anticipated future conditions of increased storm frequency will intensify the challenge such events pose for the management of fishery and aquaculture resources, and the siting of restoration efforts.

  18. Advanced reservoir characterization for improved oil recovery in a New Mexico Delaware basin project

    SciTech Connect

    Martin, F.D.; Kendall, R.P.; Whitney, E.M.

    1997-08-01

    The Nash Draw Brushy Canyon Pool in Eddy County, New Mexico is a field demonstration site in the Department of Energy Class III program. The basic problem at the Nash Draw Pool is the low recovery typically observed in similar Delaware fields. By comparing a control area using standard infill drilling techniques to a pilot area developed using advanced reservoir characterization methods, the goal of the project is to demonstrate that advanced technology can significantly improve oil recovery. During the first year of the project, four new producing wells were drilled, serving as data acquisition wells. Vertical seismic profiles and a 3-D seismic survey were acquired to assist in interwell correlations and facies prediction. Limited surface access at the Nash Draw Pool, caused by proximity of underground potash mining and surface playa lakes, limits development with conventional drilling. Combinations of vertical and horizontal wells combined with selective completions are being evaluated to optimize production performance. Based on the production response of similar Delaware fields, pressure maintenance is a likely requirement at the Nash Draw Pool. A detailed reservoir model of pilot area was developed, and enhanced recovery options, including waterflooding, lean gas, and carbon dioxide injection, are being evaluated.

  19. a Pcb Based Capacitive Shear Force Sensor Developed for Robotic Gripper Application

    NASA Astrophysics Data System (ADS)

    Huang, Jian-Lin; Chen, Sheng-Jui; Wu, Gwo-Jen; Wu, Chung-Lin; Pan, Sheau-Shi

    The shear force sensor is one of the key elements in future robotic industry, it is of great importance in applications where robotic arms are required to delicately interact with objects to be handled. In this paper, we present the development of a capacitive shear force capable of sensing shear forces in two degrees of freedom. The fabrication of the sensor is based on the printed circuit board (PCB) fabrication process, a well-known and mature technology. We adopt the capacitance sensing scheme for its high sensitivity and easy implementation. For sensor characterization, we used a force gauge and an optical interferometer to measure sensor's parameters including its sensing coefficient and resolution. The dimension of our prototype shear force sensor including the metal housing is 26 mm×13 mm×58 mm suitable for the integration with commercial robotic grippers. For sensor performance, we achieved a shear force sensing coefficient of 23.3 fF/N and a resolution of smaller than 5mN.

  20. Mechanical dynamics in live cells and fluorescence-based force/tension sensors

    PubMed Central

    Yang, Chao; Zhang, Xiaohan; Guo, Yichen; Meng, Fanjie; Sachs, Frederick; Guo, Jun

    2016-01-01

    Three signaling systems play the fundamental roles in modulating cell activities: chemical, electrical, and mechanical. While the former two are well studied, the mechanical signaling system is still elusive because of the lack of methods to measure structural forces in real time at cellular and subcellular levels. Indeed, almost all biological processes are responsive to modulation by mechanical forces that trigger dispersive downstream electrical and biochemical pathways. Communication among the three systems is essential to make cells and tissues receptive to environmental changes. Cells have evolved many sophisticated mechanisms for the generation, perception and transduction of mechanical forces, including motor proteins and mechanosensors. In this review, we introduce some background information about mechanical dynamics in live cells, including the ubiquitous mechanical activity, various types of mechanical stimuli exerted on cells and the different mechanosensors. We also summarize recent results obtained using genetically encoded FRET (fluorescence resonance energy transfer)-based force/tension sensors; a new technique used to measure mechanical forces in structural proteins. The sensors have been incorporated into many specific structural proteins and have measured the force gradients in real time within live cells, tissues, and animals. PMID:25958335

  1. Mechanical dynamics in live cells and fluorescence-based force/tension sensors.

    PubMed

    Yang, Chao; Zhang, Xiaohan; Guo, Yichen; Meng, Fanjie; Sachs, Frederick; Guo, Jun

    2015-08-01

    Three signaling systems play the fundamental roles in modulating cell activities: chemical, electrical, and mechanical. While the former two are well studied, the mechanical signaling system is still elusive because of the lack of methods to measure structural forces in real time at cellular and subcellular levels. Indeed, almost all biological processes are responsive to modulation by mechanical forces that trigger dispersive downstream electrical and biochemical pathways. Communication among the three systems is essential to make cells and tissues receptive to environmental changes. Cells have evolved many sophisticated mechanisms for the generation, perception and transduction of mechanical forces, including motor proteins and mechanosensors. In this review, we introduce some background information about mechanical dynamics in live cells, including the ubiquitous mechanical activity, various types of mechanical stimuli exerted on cells and the different mechanosensors. We also summarize recent results obtained using genetically encoded FRET (fluorescence resonance energy transfer)-based force/tension sensors; a new technique used to measure mechanical forces in structural proteins. The sensors have been incorporated into many specific structural proteins and have measured the force gradients in real time within live cells, tissues, and animals.

  2. Label-Free Sensing of Adenosine Based on Force Variations Induced by Molecular Recognition

    PubMed Central

    Li, Jingfeng; Li, Qing; Colombi Ciacchi, Lucio; Wei, Gang

    2015-01-01

    We demonstrate a simple force-based label-free strategy for the highly sensitive sensing of adenosine. An adenosine ssDNA aptamer was bound onto an atomic force microscopy (AFM) probe by covalent modification, and the molecular-interface adsorption force between the aptamer and a flat graphite surface was measured by single-molecule force spectroscopy (SMFS). In the presence of adenosine, the molecular recognition between adenosine and the aptamer resulted in the formation of a folded, hairpin-like DNA structure and hence caused a variation of the adsorption force at the graphite/water interface. The sensitive force response to molecular recognition provided an adenosine detection limit in the range of 0.1 to 1 nM. The addition of guanosine, cytidine, and uridine had no significant interference with the sensing of adenosine, indicating a strong selectivity of this sensor architecture. In addition, operational parameters that may affect the sensor, such as loading rate and solution ionic strength, were investigated. PMID:25808841

  3. DNA-based digital tension probes reveal integrin forces during early cell adhesion

    NASA Astrophysics Data System (ADS)

    Zhang, Yun; Ge, Chenghao; Zhu, Cheng; Salaita, Khalid

    2014-10-01

    Mechanical stimuli profoundly alter cell fate, yet the mechanisms underlying mechanotransduction remain obscure because of a lack of methods for molecular force imaging. Here to address this need, we develop a new class of molecular tension probes that function as a switch to generate a 20- to 30-fold increase in fluorescence upon experiencing a threshold piconewton force. The probes employ immobilized DNA hairpins with tunable force response thresholds, ligands and fluorescence reporters. Quantitative imaging reveals that integrin tension is highly dynamic and increases with an increasing integrin density during adhesion formation. Mixtures of fluorophore-encoded probes show integrin mechanical preference for cyclized RGD over linear RGD peptides. Multiplexed probes with variable guanine-cytosine content within their hairpins reveal integrin preference for the more stable probes at the leading tip of growing adhesions near the cell edge. DNA-based tension probes are among the most sensitive optical force reporters to date, overcoming the force and spatial resolution limitations of traction force microscopy.

  4. Moving forces identification based on structure health monitoring for cable-stayed bridge with regularizations

    NASA Astrophysics Data System (ADS)

    Zhang, Fujian; Li, Hui

    2011-04-01

    A new approach suitable for cable-stayed bridge is presented in this paper. Moving force identification method for cablestayed bridge was seldom reported. In previous research bridges were modeled as Timoshenko beams or orthotropic plates, while cable-stayed bridge can't be modeled as beams or plates. In this paper, the deck of bridge was separated from other parts, by replacing the cables with equivalent forces based on measurements. And according to D'Alembert principle the equation of motion of deck can be established, from which the moving external forces can be obtained, given measured time-varying cable forces and accelerations. However this is typically an inverse and ill-posed problem, because the measured global variables is not so sensitive to local loads such as vehicle loads for a large-span bridge meanwhile the noise plays an essential role in measured signals. The Tikhonov regularization methods are adopted for solving the ill-posed problem. Simulation studies are used to verify the method. The main contributions of this paper are: a. to propose a method for identifying moving forces on cable-stayed bridge; b. both the location and the magnitude of the force can be identified; c. the vehicles in different lanes can be identified.

  5. Atomistic insight into orthoborate-based ionic liquids: force field development and evaluation.

    PubMed

    Wang, Yong-Lei; Shah, Faiz Ullah; Glavatskih, Sergei; Antzutkin, Oleg N; Laaksonen, Aatto

    2014-07-24

    We have developed an all-atomistic force field for a new class of halogen-free chelated orthoborate-phosphonium ionic liquids. The force field is based on an AMBER framework with determination of force field parameters for phosphorus and boron atoms, as well as refinement of several available parameters. The bond and angle force constants were adjusted to fit vibration frequency data derived from both experimental measurements and ab initio calculations. The force field parameters for several dihedral angles were obtained by fitting torsion energy profiles deduced from ab initio calculations. To validate the proposed force field parameters, atomistic simulations were performed for 12 ionic liquids consisting of tetraalkylphosphonium cations and chelated orthoborate anions. The predicted densities for neat ionic liquids and the [P6,6,6,14][BOB] sample, with a water content of approximately 2.3-2.5 wt %, are in excellent agreement with available experimental data. The potential energy components of 12 ionic liquids were discussed in detail. The radial distribution functions and spatial distribution functions were analyzed and visualized to probe the microscopic ionic structures of these ionic liquids. There are mainly four high-probability regions of chelated orthoborate anions distributed around tetraalkylphosphonium cations in the first solvation shell, and such probability distribution functions are strongly influenced by the size of anions. PMID:25020237

  6. Label-free sensing of adenosine based on force variations induced by molecular recognition.

    PubMed

    Li, Jingfeng; Li, Qing; Ciacchi, Lucio Colombi; Wei, Gang

    2015-03-01

    We demonstrate a simple force-based label-free strategy for the highly sensitive sensing of adenosine. An adenosine ssDNA aptamer was bound onto an atomic force microscopy (AFM) probe by covalent modification, and the molecular-interface adsorption force between the aptamer and a flat graphite surface was measured by single-molecule force spectroscopy (SMFS). In the presence of adenosine, the molecular recognition between adenosine and the aptamer resulted in the formation of a folded, hairpin-like DNA structure and hence caused a variation of the adsorption force at the graphite/water interface. The sensitive force response to molecular recognition provided an adenosine detection limit in the range of 0.1 to 1 nM. The addition of guanosine, cytidine, and uridine had no significant interference with the sensing of adenosine, indicating a strong selectivity of this sensor architecture. In addition, operational parameters that may affect the sensor, such as loading rate and solution ionic strength, were investigated.

  7. Atomistic insight into orthoborate-based ionic liquids: force field development and evaluation.

    PubMed

    Wang, Yong-Lei; Shah, Faiz Ullah; Glavatskih, Sergei; Antzutkin, Oleg N; Laaksonen, Aatto

    2014-07-24

    We have developed an all-atomistic force field for a new class of halogen-free chelated orthoborate-phosphonium ionic liquids. The force field is based on an AMBER framework with determination of force field parameters for phosphorus and boron atoms, as well as refinement of several available parameters. The bond and angle force constants were adjusted to fit vibration frequency data derived from both experimental measurements and ab initio calculations. The force field parameters for several dihedral angles were obtained by fitting torsion energy profiles deduced from ab initio calculations. To validate the proposed force field parameters, atomistic simulations were performed for 12 ionic liquids consisting of tetraalkylphosphonium cations and chelated orthoborate anions. The predicted densities for neat ionic liquids and the [P6,6,6,14][BOB] sample, with a water content of approximately 2.3-2.5 wt %, are in excellent agreement with available experimental data. The potential energy components of 12 ionic liquids were discussed in detail. The radial distribution functions and spatial distribution functions were analyzed and visualized to probe the microscopic ionic structures of these ionic liquids. There are mainly four high-probability regions of chelated orthoborate anions distributed around tetraalkylphosphonium cations in the first solvation shell, and such probability distribution functions are strongly influenced by the size of anions.

  8. Feedforward suppression of force ripple based on a simplex-optimized dither signal.

    PubMed

    Tan, K K; Chin, S J; Dou, H F

    2003-01-01

    This paper presents the design and realization of a feedforward dither signal to reduce the force ripple in an iron-core permanent magnet linear motor (PMLM). A composite control structure is used, consisting of three components: a simple feedforward component, a PID feedback component, and a ripple compensator (RC). The first two components are designed based on a dominant linear model of the motor. The dither signal is generated based on a signal model which is identified using a multidimensional simplex downhill method. In this way, a simple approach is available to eliminate or suppress the inherent force ripple, thus facilitating smooth precise motion while uncompromising on the maximum force achievable. Real-time experimental results verify the effectiveness of the proposed scheme for high precision motion trajectory tracking.

  9. Creep force modelling for rail traction vehicles based on the Fastsim algorithm

    NASA Astrophysics Data System (ADS)

    Spiryagin, Maksym; Polach, Oldrich; Cole, Colin

    2013-11-01

    The evaluation of creep forces is a complex task and their calculation is a time-consuming process for multibody simulation (MBS). A methodology of creep forces modelling at large traction creepages has been proposed by Polach [Creep forces in simulations of traction vehicles running on adhesion limit. Wear. 2005;258:992-1000; Influence of locomotive tractive effort on the forces between wheel and rail. Veh Syst Dyn. 2001(Suppl);35:7-22] adapting his previously published algorithm [Polach O. A fast wheel-rail forces calculation computer code. Veh Syst Dyn. 1999(Suppl);33:728-739]. The most common method for creep force modelling used by software packages for MBS of running dynamics is the Fastsim algorithm by Kalker [A fast algorithm for the simplified theory of rolling contact. Veh Syst Dyn. 1982;11:1-13]. However, the Fastsim code has some limitations which do not allow modelling the creep force - creep characteristic in agreement with measurements for locomotives and other high-power traction vehicles, mainly for large traction creep at low-adhesion conditions. This paper describes a newly developed methodology based on a variable contact flexibility increasing with the ratio of the slip area to the area of adhesion. This variable contact flexibility is introduced in a modification of Kalker's code Fastsim by replacing the constant Kalker's reduction factor, widely used in MBS, by a variable reduction factor together with a slip-velocity-dependent friction coefficient decreasing with increasing global creepage. The proposed methodology is presented in this work and compared with measurements for different locomotives. The modification allows use of the well recognised Fastsim code for simulation of creep forces at large creepages in agreement with measurements without modifying the proven modelling methodology at small creepages.

  10. A pre-conditioned implicit direct forcing based immersed boundary method for incompressible viscous flows

    NASA Astrophysics Data System (ADS)

    Park, Hyunwook; Pan, Xiaomin; Lee, Changhoon; Choi, Jung-Il

    2016-06-01

    A novel immersed boundary (IB) method based on an implicit direct forcing (IDF) scheme is developed for incompressible viscous flows. The key idea for the present IDF method is to use a block LU decomposition technique in momentum equations with Taylor series expansion to construct the implicit IB forcing in a recurrence form, which imposes more accurate no-slip boundary conditions on the IB surface. To accelerate the IB forcing convergence during the iterative procedure, a pre-conditioner matrix is introduced in the recurrence formulation of the IB forcing. A Jacobi-type parameter is determined in the pre-conditioner matrix by minimizing the Frobenius norm of the matrix function representing the difference between the IB forcing solution matrix and the pre-conditioner matrix. In addition, the pre-conditioning parameter is restricted due to the numerical stability in the recurrence formulation. Consequently, the present pre-conditioned IDF (PIDF) enables accurate calculation of the IB forcing within a few iterations. We perform numerical simulations of two-dimensional flows around a circular cylinder and three-dimensional flows around a sphere for low and moderate Reynolds numbers. The result shows that PIDF yields a better imposition of no-slip boundary conditions on the IB surfaces for low Reynolds number with a fairly larger time step than IB methods with different direct forcing schemes due to the implicit treatment of the diffusion term for determining the IB forcing. Finally, we demonstrate the robustness of the present PIDF scheme by numerical simulations of flow around a circular array of cylinders, flows around a falling sphere, and two sedimenting spheres in gravity.

  11. Infrared view of Chesapeake Bay showing Virginia, Maryland and Delaware

    NASA Technical Reports Server (NTRS)

    1975-01-01

    An infrared, near view of the Chesapeake Bay area showing portions of Virginia, Maryland and Delaware, as photographed from the Apollo spacecraft in Earth orbit during the joint U.S.-USSR Apollo Soyuz Test Project (ASTP) mission. Richmond and Norfolk can be seen in this picture. Tidewater, Virginia covers much of this view. The photograph was taken at an altitude of 217 kilometers (135 statute miles).

  12. Exploring Marine Science through the University of Delaware's TIDE camp

    NASA Astrophysics Data System (ADS)

    Veron, D. E.; Newton, F. A.; Veron, F.; Trembanis, A. C.; Miller, D. C.

    2012-12-01

    For the past five years, the University of Delaware has offered a two-week, residential, summer camp to rising sophomores, juniors, and seniors who are interested in marine science. The camp, named TIDE (Taking an Interest in Delaware's Estuary) camp, is designed to introduce students to the breadth of marine science while providing them with a college experience. Campers participate in a variety of academic activities which include classroom, laboratory, and field experiences, as well as numerous social activities. Two unique features of this small, focused camp is the large number of university faculty that are involved, and the ability of students to participate in ongoing research projects. At various times students have participated in fish and dolphin counts, AUV deployment, wind-wave tank experiments, coastal water and beach studies, and ROV activities. In addition, each year campers have participated in a local service project. Through communication with former TIDE participants, it is clear that this two-week, formative experience plays a large role in students choice of major when entering college.2012 Tide Camp - Salt marsh in southern Delaware 2012 Tide Camp - Field trip on a small boat

  13. Molecular simulations of imidazolium-based tricyanomethanide ionic liquids using an optimized classical force field.

    PubMed

    Vergadou, Niki; Androulaki, Eleni; Hill, Jörg-Rüdiger; Economou, Ioannis G

    2016-03-01

    Imidazolium-based ionic liquids (ILs) incorporating the tricyanomethanide ([TCM(-)]) anion are studied using an optimized classical force field. These ILs are very promising candidates for use in a wide range of cutting-edge technologies and, to our knowledge, it is the first time that this IL family is subject to a molecular simulation study with the use of a classical atomistic force field. The [C4mim(+)][TCM(-)] ionic liquid at 298.15 K and at atmospheric pressure was used as the basis for force field optimization which primarily involved the determination of the Lennard-Jones parameters of [TCM(-)] and the implementation of three quantum mechanical schemes for the calculation of the partial charge distribution and the identification of the appropriate scaling factor for the reduction of the total ionic charge. The optimized force field was validated by performing simulations of the 1-alkyl-3-methylimidazolium tricyanomethanide ([Cnmim(+)][TCM(-)], n = 2, 4, 6, and 8) IL family at various temperatures. The results for density, self-diffusivity and viscosity are in very good agreement with the available experimental data for all ILs verifying that the force field reliably reproduces the behaviour of the imidazolium-based [TCM(-)] IL family in a wide temperature range. Furthermore, a detailed analysis of the microscopic structure and the complex dynamic behaviour of the ILs under study was performed. PMID:26878611

  14. Analyzing excitation forces acting on a plate based on measured acoustic pressure.

    PubMed

    Wu, Sean F; Zhou, Pan

    2016-07-01

    This paper presents a theoretical study on "seeing" through an elastic structure to uncover the root cause of sound and vibration by using nearfield acoustical holography (NAH) and normal modes expansion. This approach is of generality because vibro-acoustic responses on the surface of a vibrating structure can always be reconstructed, exactly or approximately. With these vibro-acoustic responses, excitation forces acting on the structure can always be determined, analytically or numerically, given any set of boundary conditions. As an example, the explicit formulations for reconstructing time-harmonic excitation forces, including point, line and surface forces, and their arbitrary combinations acting on a rectangular thin plate in vacuum mounted on an infinite baffle are presented. The reason for choosing this example is that the analytic solutions to vibro-acoustic responses are available, and in-depth analyses of results are possible. Results demonstrate that this approach allows one to identify excitation forces based on measured acoustic pressures and reveal their characteristics such as locations, types and amplitudes, as if one could "see" excitation forces acting behind the plate based on acoustic pressure measured on the opposite side. This approach is extendable to general elastic structures, except that in such circumstance numerical results must be sought. PMID:27475174

  15. [Force-based local navigation in robot-assisted implantation bed anlage in the lateral skull base. An experimental study].

    PubMed

    Plinkert, P K; Federspil, P A; Plinkert, B; Henrich, D

    2002-03-01

    Excellent precision, miss of retiring, reproducibility are main characteristics of robots in the operating theatre. Because of these facts their use for surgery in the lateral scull base is of great interest. In recent experiments we determined process parameters for robot assisted reaming of a cochlea implant bed and for a mastoidectomy. These results suggested that optimizing parameters for thrilling with the robot is needed. Therefore we implemented a suitable reaming curve from the geometrical data of the implant and a force controlled process control for robot assisted reaming at the lateral scull base. Experiments were performed with an industrial robot on animal and human scull base specimen. Because of online force detection and feedback of sensory data the reaming with the robot was controlled. With increasing force values above a defined limit feed rates were automatically regulated. Furthermore we were able to detect contact of the thrill to dura mater by analyzing the force values. With the new computer program the desired implant bed was exactly prepared. Our examinations showed a successful reaming of an implant bed in the lateral scull base with a robot. Because of a force controlled reaming process locale navigation is possible and enables careful thrilling with a robot.

  16. Lift vs. drag based mechanisms for vertical force production in the smallest flying insects.

    PubMed

    Jones, S K; Laurenza, R; Hedrick, T L; Griffith, B E; Miller, L A

    2015-11-01

    We used computational fluid dynamics to determine whether lift- or drag-based mechanisms generate the most vertical force in the flight of the smallest insects. These insects fly at Re on the order of 4-60 where viscous effects are significant. Detailed quantitative data on the wing kinematics of the smallest insects is not available, and as a result both drag- and lift-based strategies have been suggested as the mechanisms by which these insects stay aloft. We used the immersed boundary method to solve the fully-coupled fluid-structure interaction problem of a flexible wing immersed in a two-dimensional viscous fluid to compare three idealized hovering kinematics: a drag-based stroke in the vertical plane, a lift-based stroke in the horizontal plane, and a hybrid stroke on a tilted plane. Our results suggest that at higher Re, a lift-based strategy produces more vertical force than a drag-based strategy. At the Re pertinent to small insect hovering, however, there is little difference in performance between the two strategies. A drag-based mechanism of flight could produce more vertical force than a lift-based mechanism for insects at Re<5; however, we are unaware of active fliers at this scale.

  17. Multiyear Observations of Cloud Lines Associated with the Chesapeake and Delaware Bays.

    NASA Astrophysics Data System (ADS)

    Sikora, Todd D.; Halverson, David M.

    2002-08-01

    Satellite and corresponding near-surface in situ observations have been made of single- and dual-band cloud events [dubbed anomalous cloud lines (ACLs)] associated with the Chesapeake and Delaware Bays. A previous study developed the basis for two hypotheses concerning the mechanism responsible for ACLs. One explanation is that ACLs are forced in the same manner as Great Lakes lake-effect midlake cloud lines. An alternate explanation is that at least some ACLs are a special type of ship track that forms in statically unstable marine boundary layers. The time period examined in the current research is January 1997-December 2000. National Oceanic and Atmospheric Administration (NOAA) Advanced Very High Resolution Radiometer imagery served as the satellite dataset, and NOAA buoy 44009 and Coastal-Marine Automated Network station CHLV2 provided the in situ data. The findings from the satellite portion of this research show that ACLs associated with both the Chesapeake and Delaware Bays were observed on roughly 3% of the days examined and were more frequent during the onset of the cold season. The data also show that single-band ACLs were, in general, more frequent than dual-band ACLs. For the near-surface in situ portion of this research, the average ACL for both bays was associated with a negative air-sea temperature difference and a larger downbay wind component than cross-bay wind component. On a month-by-month basis, ACLs for both bays tended to be associated with abnormally large downbay wind speeds and negative air-sea temperature differences in comparison with the corresponding weighted monthly norms.

  18. The Impact of Acquiescence on Forced-Choice Responses: A Model-Based Analysis

    ERIC Educational Resources Information Center

    Ferrando, Pere J.; Anguiano-Carrasco, Cristina; Chico, Eliseo

    2011-01-01

    The general aim of the present study is to assess the potential usefulness of the normative Forced Choice (FC) format for reducing the impact of acquiescent responding (AR). To this end it makes two types of contributions: methodological and substantive. Methodologically, it proposes a model-based procedure, derived from a basic response…

  19. SIMULATION OF INTRINSIC BIOREMEDIATION PROCESSES AT WURTSMITH AIR FORCE BASE, MICHIGAN

    EPA Science Inventory

    In October, 1988, a KC-135 aircraft crashed at Wurtsmith Air Force base (AFB), Oscoda, Michigan during an attempted landing. Approximately 3000 gallons of jet fuel (JP-4) were spilled onto the ground, with a large portion of the fuel entering the subsurface. Previous investigat...

  20. CloudSat Preps for Launch at Vandenberg Air Force Base, CA

    NASA Technical Reports Server (NTRS)

    2005-01-01

    The CloudSat spacecraft sits encapsulated within its Boeing Delta launch vehicle dual payload attach fitting at Vandenberg Air Force Base, Calif. CloudSat will share its ride to orbit late next month with NASA's CALIPSO spacecraft. The two spacecraft are designed to reveal the secrets of clouds and aerosols.

  1. NATURAL ATTENUATION OF CHLORINATED SOLVENTS AT MULTIPLE AIR FORCE BASE DEMONSTRATION SITES

    EPA Science Inventory

    Natural attenuation treatability studies(TSs) were conducted at 14 US Air Force bases. Only sites where biodegradation of CAHs was suspected were selected for the study. The major initiative was to evaluate the effectiveness of monitored natural attenuation(MNA) at sites contam...

  2. BIOREMEDIATION FIELD EVALUATION: EIELSON AIR FORCE BASE, ALASKA (EPA/540/R-95/533)

    EPA Science Inventory

    This publication, one of a series presenting the findings of the Bioremediation Field Initiatives bioremediation field evaluations, provides a detailed summary of the evaluation conducted at the Eielson Air Force Base (AFB) Superfund site in Fairbanks, Alaska. At this site, the ...

  3. 33 CFR 334.560 - Banana River at Patrick Air Force Base, Fla.; restricted area.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Banana River at Patrick Air Force Base, Fla.; restricted area. 334.560 Section 334.560 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.560...

  4. 33 CFR 334.560 - Banana River at Patrick Air Force Base, Fla.; restricted area.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Banana River at Patrick Air Force Base, Fla.; restricted area. 334.560 Section 334.560 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.560...

  5. 33 CFR 334.560 - Banana River at Patrick Air Force Base, Fla.; restricted area.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Banana River at Patrick Air Force Base, Fla.; restricted area. 334.560 Section 334.560 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.560...

  6. 33 CFR 334.560 - Banana River at Patrick Air Force Base, Fla.; restricted area.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Banana River at Patrick Air Force Base, Fla.; restricted area. 334.560 Section 334.560 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.560...

  7. 33 CFR 334.560 - Banana River at Patrick Air Force Base, Fla.; restricted area.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Banana River at Patrick Air Force Base, Fla.; restricted area. 334.560 Section 334.560 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.560...

  8. Analysis of vector wind change with respect to time for Vandenberg Air Force Base, California

    NASA Technical Reports Server (NTRS)

    Adelfang, S. I.

    1978-01-01

    A statistical analysis of the temporal variability of wind vectors at 1 km altitude intervals from 0 to 27 km altitude taken from a 10-year data sample of twice-daily rawinsode wind measurements over Vandenberg Air Force Base, California is presented.

  9. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    SciTech Connect

    Not Available

    1992-03-01

    This report presents information related to the sampling of ground water at the Wright-Patterson Air Force Base. It is part of an investigation into possible ground water contamination. Information concerns well drilling/construction; x-ray diffraction and sampling; soil boring logs; and chain-of-custody records.

  10. Applying Model Analysis to a Resource-Based Analysis of the Force and Motion Conceptual Evaluation

    ERIC Educational Resources Information Center

    Smith, Trevor I.; Wittmann, Michael C.; Carter, Tom

    2014-01-01

    Previously, we analyzed the Force and Motion Conceptual Evaluation in terms of a resources-based model that allows for clustering of questions so as to provide useful information on how students correctly or incorrectly reason about physics. In this paper, we apply model analysis to show that the associated model plots provide more information…

  11. Landing of STS-59 Shuttle Endeavour at Edwards Air Force Base

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The main landing gear of the Space Shuttle Endeavour touches down at Edwards Air Force Base to complete the 11 day STS-59/SRL-1 mission. Landing occured at 9:54 a.m., April 20, 1994. Mission duration was 11 days, 5 hours, 49 minutes.

  12. STEAM ENHANCED REMEDIATION RESEARCH FOR DNAPL IN FRACTURED ROCK, LORING AIR FORCE BASE, LIMESTONE, MAINE

    EPA Science Inventory

    This report details a research project on Steam Enhanced Remediation (SER) for the recovery of volatile organic compounds from fractured limestone that was carried out at the Quarry at the former Loring Air Force Base in Limestone, Maine. This project was carried out by USEPA, Ma...

  13. Ground-water conditions at Beale Air Force Base and vicinity, California

    USGS Publications Warehouse

    Page, R.W.

    1980-01-01

    Ground-water conditions were studied in a 168-square-mile area between the Sierra Nevada and the Feather River in Yuba County, Calif. The area is in the eastern part of the Sacramento Valley and includes most of Beale Air Force Base. Source, occurrence, movement, and chemical quality of the ground water were evaluated. Ground water occurs in sedimentary and volcanic rocks of Tertiary and Quaternary age. The base of the freshwater is in the undifferentiated sedimentary rocks of Oligocene and Eocene age, that contain water of high dissolved-solids concentration. The ground water occurs under unconfined and partly confined conditions. At Beale Air Force Base it is at times partly confined. Recharge is principally from the rivers. Pumpage in the study area was estimated to be 129,000 acre-feet in 1975. In the 1960's, water levels in most parts of the study area declined less rapidly than in earlier years or became fairly stable. In the 1970's, water levels at Beale Air Force Base declined only slightly. Spacing of wells on the base and rates of pumping are such that excessive pumping interference is avoided. Water quality at the base and throughout the study area is generally good. Dissolved-solids concentrations are 700 to 900 milligrams per liter in the undifferentiated sedimentary rocks beneath the base well field. (USGS)

  14. Force/torque and tactile sensors for sensor-based manipulator control

    NASA Technical Reports Server (NTRS)

    Vanbrussel, H.; Belieen, H.; Bao, Chao-Ying

    1989-01-01

    The autonomy of manipulators, in space and in industrial environments, can be dramatically enhanced by the use of force/torque and tactile sensors. The development and future use of a six-component force/torque sensor for the Hermes Robot Arm (HERA) Basic End-Effector (BEE) is discussed. Then a multifunctional gripper system based on tactile sensors is described. The basic transducing element of the sensor is a sheet of pressure-sensitive polymer. Tactile image processing algorithms for slip detection, object position estimation, and object recognition are described.

  15. Data on wells in the Edwards Air Force Base area, California

    USGS Publications Warehouse

    Dutcher, L.C.; Bader, J.S.; Hiltgen, W.J.

    1962-01-01

    The data presented In this report were collected by the U.S. Geological Survey as a phase of the investigation of ground-water geology and hydrology of the Edwards Air Force Base area. The study was made in cooperation with the Department of the Air Force but also was coincident with the U.S. Geological Survey investigation of water wells and general hydrologic conditions throughout much of the desert region of southern California. The overall study of general hydrologic conditions in the desert is part of a cooperative program with the California Department of Water Resources.

  16. Mountain Home Air Force Base, Idaho Geothermal Resource Assessment and Future Recommendations

    SciTech Connect

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2013-03-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base in early 2011 near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home Air Force Base. In conclusion, Recommendation for follow-up efforts include the following:

  17. Wave-based control of under-actuated flexible structures with strong external disturbing forces

    NASA Astrophysics Data System (ADS)

    O'Connor, William J.; Habibi, Hossein

    2015-09-01

    Wave-based control of under-actuated, flexible systems has many advantages over other methods. It considers actuator motion as launching a mechanical wave into the flexible system which it absorbs on its return to the actuator. The launching and absorbing proceed simultaneously. This simple, intuitive idea leads to robust, generic, highly efficient, precise, adaptable controllers, allowing rapid and almost vibrationless re-positioning of the system, using only sensors collocated at the actuator-system interface. It has been very successfully applied to simple systems such as mass-spring strings, systems of Euler-Bernoulli beams, planar mass-spring arrays, and flexible three-dimensional space structures undergoing slewing motion. In common with most other approaches, this work also assumed that, during a change of position, the forces from the environment were negligible in comparison with internal forces and torques. This assumption is not always valid. Strong external forces considerably complicate the flexible control problem, especially when unknown, unexpected or unmodelled. The current work extends the wave-based strategy to systems experiencing significant external disturbing forces, whether enduring or transient. The work also provides further robustness to sensor errors. The strategy has the controller learn about the disturbances and compensate for them, yet without needing new sensors, measurements or models beyond those of standard wave-based control.

  18. Viscoelastic model based force control for soft tissue interaction and its application in physiological motion compensation.

    PubMed

    Moreira, Pedro; Zemiti, Nabil; Liu, Chao; Poignet, Philippe

    2014-09-01

    Controlling the interaction between robots and living soft tissues has become an important issue as the number of robotic systems inside the operating room increases. Many researches have been done on force control to help surgeons during medical procedures, such as physiological motion compensation and tele-operation systems with haptic feedback. In order to increase the performance of such controllers, this work presents a novel force control scheme using Active Observer (AOB) based on a viscoelastic interaction model. The control scheme has shown to be stable through theoretical analysis and its performance was evaluated by in vitro experiments. In order to evaluate how the force control scheme behaves under the presence of physiological motion, experiments considering breathing and beating heart disturbances are presented. The proposed control scheme presented a stable behavior in both static and moving environment. The viscoelastic AOB presented a compensation ratio of 87% for the breathing motion and 79% for the beating heart motion.

  19. Force control of a magnetorheological damper using an elementary hysteresis model-based feedforward neural network

    NASA Astrophysics Data System (ADS)

    Ekkachai, Kittipong; Tungpimolrut, Kanokvate; Nilkhamhang, Itthisek

    2013-11-01

    An inverse controller is proposed for a magnetorheological (MR) damper that consists of a hysteresis model and a voltage controller. The force characteristics of the MR damper caused by excitation signals are represented by a feedforward neural network (FNN) with an elementary hysteresis model (EHM). The voltage controller is constructed using another FNN to calculate a suitable input signal that will allow the MR damper to produce the desired damping force. The performance of the proposed EHM-based FNN controller is experimentally compared to existing control methodologies, such as clipped-optimal control, signum function control, conventional FNN, and recurrent neural network with displacement or velocity inputs. The results show that the proposed controller, which does not require force feedback to implement, provides excellent accuracy, fast response time, and lower energy consumption.

  20. 3D force control for robotic-assisted beating heart surgery based on viscoelastic tissue model.

    PubMed

    Liu, Chao; Moreira, Pedro; Zemiti, Nabil; Poignet, Philippe

    2011-01-01

    Current cardiac surgery faces the challenging problem of heart beating motion even with the help of mechanical stabilizer which makes delicate operation on the heart surface difficult. Motion compensation methods for robotic-assisted beating heart surgery have been proposed recently in literature, but research on force control for such kind of surgery has hardly been reported. Moreover, the viscoelasticity property of the interaction between organ tissue and robotic instrument further complicates the force control design which is much easier in other applications by assuming the interaction model to be elastic (industry, stiff object manipulation, etc.). In this work, we present a three-dimensional force control method for robotic-assisted beating heart surgery taking into consideration of the viscoelastic interaction property. Performance studies based on our D2M2 robot and 3D heart beating motion information obtained through Da Vinci™ system are provided.

  1. Determination of Quantum Chemistry Based Force Fields for Molecular Dynamics Simulations of Aromatic Polymers

    NASA Technical Reports Server (NTRS)

    Jaffe, Richard; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    Ab initio quantum chemistry calculations for model molecules can be used to parameterize force fields for molecular dynamics simulations of polymers. Emphasis in our research group is on using quantum chemistry-based force fields for molecular dynamics simulations of organic polymers in the melt and glassy states, but the methodology is applicable to simulations of small molecules, multicomponent systems and solutions. Special attention is paid to deriving reliable descriptions of the non-bonded and electrostatic interactions. Several procedures have been developed for deriving and calibrating these parameters. Our force fields for aromatic polyimide simulations will be described. In this application, the intermolecular interactions are the critical factor in determining many properties of the polymer (including its color).

  2. A Noncontact Force Sensor Based on a Fiber Bragg Grating and Its Application for Corrosion Measurement

    PubMed Central

    Pacheco, Clara J.; Bruno, Antonio C.

    2013-01-01

    A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber shifting the reflected Bragg wavelength. The measured shift for the optical fiber used was 1.36 nm per Newton. Models were developed to optimize the magnet geometry for a specific sensor standoff distance and for particular corrosion pit depths. The sensor was able to detect corrosion pits on a fuel storage tank bottom with depths in the sub-millimeter range. PMID:23995095

  3. A noncontact force sensor based on a fiber Bragg grating and its application for corrosion measurement.

    PubMed

    Pacheco, Clara J; Bruno, Antonio C

    2013-01-01

    A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber shifting the reflected Bragg wavelength. The measured shift for the optical fiber used was 1.36 nm per Newton. Models were developed to optimize the magnet geometry for a specific sensor standoff distance and for particular corrosion pit depths. The sensor was able to detect corrosion pits on a fuel storage tank bottom with depths in the sub-millimeter range. PMID:23995095

  4. Magnitude and Frequency of Floods on Nontidal Streams in Delaware

    USGS Publications Warehouse

    Ries, Kernell G.; Dillow, Jonathan J.A.

    2006-01-01

    Reliable estimates of the magnitude and frequency of annual peak flows are required for the economical and safe design of transportation and water-conveyance structures. This report, done in cooperation with the Delaware Department of Transportation (DelDOT) and the Delaware Geological Survey (DGS), presents methods for estimating the magnitude and frequency of floods on nontidal streams in Delaware at locations where streamgaging stations monitor streamflow continuously and at ungaged sites. Methods are presented for estimating the magnitude of floods for return frequencies ranging from 2 through 500 years. These methods are applicable to watersheds exhibiting a full range of urban development conditions. The report also describes StreamStats, a web application that makes it easy to obtain flood-frequency estimates for user-selected locations on Delaware streams. Flood-frequency estimates for ungaged sites are obtained through a process known as regionalization, using statistical regression analysis, where information determined for a group of streamgaging stations within a region forms the basis for estimates for ungaged sites within the region. One hundred and sixteen streamgaging stations in and near Delaware with at least 10 years of non-regulated annual peak-flow data available were used in the regional analysis. Estimates for gaged sites are obtained by combining the station peak-flow statistics (mean, standard deviation, and skew) and peak-flow estimates with regional estimates of skew and flood-frequency magnitudes. Example flood-frequency estimate calculations using the methods presented in the report are given for: (1) ungaged sites, (2) gaged locations, (3) sites upstream or downstream from a gaged location, and (4) sites between gaged locations. Regional regression equations applicable to ungaged sites in the Piedmont and Coastal Plain Physiographic Provinces of Delaware are presented. The equations incorporate drainage area, forest cover, impervious

  5. Development of AMOEBA force field for 1,3-dimethylimidazolium based ionic liquids.

    PubMed

    Starovoytov, Oleg N; Torabifard, Hedieh; Cisneros, G Andrés

    2014-06-26

    The development of AMOEBA (a multipolar polarizable force field) for imidazolium based ionic liquids is presented. Our parametrization method follows the AMOEBA procedure and introduces the use of QM intermolecular total interactions as well as QM energy decomposition analysis (EDA) to fit individual interaction energy components. The distributed multipoles for the cation and anions have been derived using both the Gaussian distributed multipole analysis (GDMA) and Gaussian electrostatic model-distributed multipole (GEM-DM) methods.1 The intermolecular interactions of a 1,3-dimethylimidazolium [dmim(+)] cation with various anions, including fluoride [F(-)], chloride [Cl(-)], nitrate [NO(3)(-)], and tetraflorouborate [BF(4)(-)], were studied using quantum chemistry calculations at the MP2/6-311G(d,p) level of theory. Energy decomposition analysis was performed for each pair using the restricted variational space decomposition approach (RVS) at the HF/6-311G(d,p) level. The new force field was validated by running a series of molecular dynamic (MD) simulations and by analyzing thermodynamic and structural properties of these systems. A number of thermodynamic properties obtained from MD simulations were compared with available experimental data. The ionic liquid structure reproduced using the AMOEBA force field is also compared with the data from neutron diffraction experiment and other MD simulations. Employing GEM-DM force fields resulted in a good agreement on liquid densities ρ, enthalpies of vaporization ΔH(vap), and diffusion coefficients D(±) in comparison with conventional force fields.

  6. Video-based and interference-free axial force detection and analysis for optical tweezers

    NASA Astrophysics Data System (ADS)

    Knust, Sebastian; Spiering, Andre; Vieker, Henning; Beyer, André; Gölzhäuser, Armin; Tönsing, Katja; Sischka, Andy; Anselmetti, Dario

    2012-10-01

    For measuring the minute forces exerted on single molecules during controlled translocation through nanopores with sub-piconewton precision, we have developed a video-based axial force detection and analysis system for optical tweezers. Since our detection system is equipped with a standard and versatile CCD video camera with a limited bandwidth offering operation at moderate light illumination with minimal sample heating, we integrated Allan variance analysis for trap stiffness calibration. Upon manipulating a microbead in the vicinity of a weakly reflecting surface with simultaneous axial force detection, interference effects have to be considered and minimized. We measured and analyzed the backscattering light properties of polystyrene and silica microbeads with different diameters and propose distinct and optimized experimental configurations (microbead material and diameter) for minimal light backscattering and virtually interference-free microbead position detection. As a proof of principle, we investigated the nanopore threading forces of a single dsDNA strand attached to a microbead with an overall force resolution of ±0.5 pN at a sample rate of 123 Hz.

  7. Cogging force rejection method of linear motor based on internal model principle

    NASA Astrophysics Data System (ADS)

    Liu, Yang; Chen, Zhenyu; Yang, Tianbo

    2015-02-01

    The cogging force disturbance of linear motor is one of the main factors affecting the positioning accuracy of ultraprecision moving platform. And this drawback could not be completely overcome by improving the design of motor body, such as location modification of permanent magnet array, or optimization design of the shape of teeth-slot. So the active compensation algorithms become prevalent in cogging force rejection area. This paper proposed a control structure based on internal mode principle to attenuate the cogging force of linear motor which deteriorated the accuracy of position, and this structure could make tracking and anti-disturbing performance of close-loop designed respectively. In the first place, the cogging force was seen as the intrinsic property of linear motor and its model constituting controlled object with motor ontology model was obtained by data driven recursive identification method. Then, a control structure was designed to accommodate tracking and anti-interference ability separately by using internal model principle. Finally, the proposed method was verified in a long stroke moving platform driven by linear motor. The experiment results show that, by employing this control strategy, the positioning error caused by cogging force was decreased by 70%.

  8. Kinetic analysis of ski turns based on measured ground reaction forces.

    PubMed

    Vaverka, Frantisek; Vodickova, Sona; Elfmark, Milan

    2012-02-01

    The objective of this study was to devise a method of kinetic analysis of the ground reaction force that enables the durations and magnitudes of forces acting during the individual phases of ski turns to be described exactly. The method is based on a theoretical analysis of physical forces acting during the ski turn. Two elementary phases were defined: (1) preparing to turn (initiation) and (2) actual turning, during which the center of gravity of the skier-ski system moves along a curvilinear trajectory (steering). The starting point of the turn analysis is a dynamometric record of the resultant acting ground reaction force applied perpendicularly on the ski surface. The method was applied to six expert skiers. They completed a slalom course comprising five gates arranged on the fall line of a 26° slope at a competition speed using symmetrical carving turns (30 evaluated turns). A dynamometric measurement system was placed on the carving skis (168 cm long, radius 16 m, data were recorded at 100 Hz). MATLAB procedures were used to evaluate eight variables during each turn: five time variables and three force variables. Comparison of the turn analysis results between individuals showed that the method is useful for answering various research questions associated with ski turns.

  9. Force spectroscopy 101: how to design, perform, and analyze an AFM-based single molecule force spectroscopy experiment.

    PubMed

    Noy, Aleksandr

    2011-10-01

    Single molecule force spectroscopy presents a deceptively simple approach to probing interaction between molecules and molecular assemblies on the nanoscale by measuring forces that it takes to pull the molecules apart. Yet, a more detailed analysis reveals a wealth of different behaviors and interesting physics. This article aims to explore basic physical concepts behind these experiments from a strictly practical point of using these data to extract meaningful information about the interactions. It also focuses on different loading regimes in these experiments, different kinetics that they cause, and different data interpretation that is required for measurements in those regimes. PMID:21862386

  10. Prediction of ground reaction forces during gait based on kinematics and a neural network model.

    PubMed

    Oh, Seung Eel; Choi, Ahnryul; Mun, Joung Hwan

    2013-09-27

    Kinetic information during human gait can be estimated with inverse dynamics, which is based on anthropometric, kinematic, and ground reaction data. While collecting ground reaction data with a force plate is useful, it is costly and requires regulated space. The goal of this study was to propose a new, accurate methodology for predicting ground reaction forces (GRFs) during level walking without the help of a force plate. To predict GRFs without a force plate, the traditional method of Newtonian mechanics was used for the single support phase. In addition, an artificial neural network (ANN) model was applied for the double support phase to solve statically indeterminate structure problems. The input variables of the ANN model, which were selected to have both dependency and independency, were limited to the trajectory, velocity, and acceleration of the whole segment's mass centre to minimise errors. The predicted GRFs were validated with actual GRFs through a ten-fold cross-validation method, and the correlation coefficients (R) for the ground forces were 0.918 in the medial-lateral axis, 0.985 in the anterior-posterior axis, and 0.991 in the vertical axis during gait. The ground moments were 0.987 in the sagittal plane, 0.841 in the frontal plane, and 0.868 in the transverse plane during gait. The high correlation coefficients(R) are due to the improvement of the prediction rate in the double support phase. This study also proved the possibility of calculating joint forces and moments based on the GRFs predicted with the proposed new hybrid method. Data generated with the proposed method may thus be used instead of raw GRF data in gait analysis and in calculating joint dynamic data using inverse dynamics. PMID:23962528

  11. University of Delaware Library/Statewide K-12 Partnership Providing Online Resources and Training: UDLib/SEARCH.

    ERIC Educational Resources Information Center

    Millard, Sandra K.

    UDLib/SEARCH is a unique partnership between the University of Delaware Library and state K-12 education in Delaware. UDLib/SEARCH provides access to 16 full text databases via the Internet on the state network to all Delaware public high schools and middle schools, and training for teachers and librarians. Using $30 million in state funds,…

  12. Robust Operation of Tendon-Driven Robot Fingers Using Force and Position-Based Control Laws

    NASA Technical Reports Server (NTRS)

    Abdallah, Muhammad E (Inventor); Platt, Jr., Robert J. (Inventor); Reiland, Matthew J (Inventor); Hargrave, Brian (Inventor); Diftler, Myron A (Inventor); Strawser, Philip A (Inventor); Ihrke, Chris A. (Inventor)

    2013-01-01

    A robotic system includes a tendon-driven finger and a control system. The system controls the finger via a force-based control law when a tension sensor is available, and via a position-based control law when a sensor is not available. Multiple tendons may each have a corresponding sensor. The system selectively injects a compliance value into the position-based control law when only some sensors are available. A control system includes a host machine and a non-transitory computer-readable medium having a control process, which is executed by the host machine to control the finger via the force- or position-based control law. A method for controlling the finger includes determining the availability of a tension sensor(s), and selectively controlling the finger, using the control system, via the force or position-based control law. The position control law allows the control system to resist disturbances while nominally maintaining the initial state of internal tendon tensions.

  13. Polymer-based flexible capacitive sensor for three-axial force measurements

    NASA Astrophysics Data System (ADS)

    Dobrzynska, J. A.; Gijs, M. A. M.

    2013-01-01

    We have developed a flexible-substrate-based three-axial force sensor, composed of finger-shaped electrode capacitors, whose operation is based on the measurement of a capacitance change induced upon applying a three-axial load. The electrode design supports high sensitivity to shear forces. An overall flexibility of the sensor and elasticity of the capacitor's dielectric is obtained by integrating three polymers in the sensor's technology process, namely polyimide, parylene-C, and polydimethylsiloxane, combined with standard metallization processes. We have theoretically modeled the sensor's capacitance and its three-axial force sensitivity. The unit capacitors have static capacitances in the range of 20 pF. The electro-mechanical characterization of the capacitors reveals in the normal direction a sensitivity Sz = 0.024 kPa-1 for pressures <10 kPa, whereas for higher pressures the measured sensitivity Sz = 6.6 × 10-4 kPa-1. Typical measured shear force sensitivity Sx = 2.8 × 10-4 kPa-1. These values give our transducer high potential for use in skin-like sensing applications.

  14. Highly sensitive force sensor based on optical microfiber asymmetrical Fabry-Perot interferometer.

    PubMed

    Gong, Yuan; Yu, Cai-Bin; Wang, Ting-Ting; Liu, Xiu-Ping; Wu, Yu; Rao, Yun-Jiang; Zhang, Ming-Lei; Wu, Hui-Juan; Chen, Xiao-Xiao; Peng, Gang-Ding

    2014-02-10

    An asymmetrical Fabry-Perot interferometric (AFPI) force sensor is fabricated based on a narrowband reflection of low-reflectivity fiber Bragg grating (LR-FBG) and a broadband Fresnel reflection of the cleaved fiber end. The AFPI sensor includes a section of microfiber made by tapering and it achieves a force sensitivity of 0.221 pm/μN with a tapered microfiber of 40 mm length and 6.1 μm waist diameter. Compared with similar AFPI structure in 125 μm-diameter single mode fiber, the force sensitivity of the microfiber AFPI structure is greatly enhanced due to its smaller diameter and can be optimized for different force scales by controlling the diameter. The fabrication process of the AFPI sensor is simple and cost-effective. The AFPI sensor has better multiplexing capacity than conventional extrinsic fiber-optic Fabry-Perot sensors, while it also release the requirement on the wavelength matching of the FBG-pair-based FPI.

  15. Rehabilitation of the Rocket Vehicle Integration Test Stand at Edwards Air Force Base

    NASA Technical Reports Server (NTRS)

    Jones, Daniel S.; Ray, Ronald J.; Phillips, Paul

    2005-01-01

    Since initial use in 1958 for the X-15 rocket-powered research airplane, the Rocket Engine Test Facility has proven essential for testing and servicing rocket-powered vehicles at Edwards Air Force Base. For almost two decades, several successful flight-test programs utilized the capability of this facility. The Department of Defense has recently demonstrated a renewed interest in propulsion technology development with the establishment of the National Aerospace Initiative. More recently, the National Aeronautics and Space Administration is undergoing a transformation to realign the organization, focusing on the Vision for Space Exploration. These initiatives provide a clear indication that a very capable ground-test stand at Edwards Air Force Base will be beneficial to support the testing of future access-to-space vehicles. To meet the demand of full integration testing of rocket-powered vehicles, the NASA Dryden Flight Research Center, the Air Force Flight Test Center, and the Air Force Research Laboratory have combined their resources in an effort to restore and upgrade the original X-15 Rocket Engine Test Facility to become the new Rocket Vehicle Integration Test Stand. This report describes the history of the X-15 Rocket Engine Test Facility, discusses the current status of the facility, and summarizes recent efforts to rehabilitate the facility to support potential access-to-space flight-test programs. A summary of the capabilities of the facility is presented and other important issues are discussed.

  16. Highly sensitive force sensor based on optical microfiber asymmetrical Fabry-Perot interferometer.

    PubMed

    Gong, Yuan; Yu, Cai-Bin; Wang, Ting-Ting; Liu, Xiu-Ping; Wu, Yu; Rao, Yun-Jiang; Zhang, Ming-Lei; Wu, Hui-Juan; Chen, Xiao-Xiao; Peng, Gang-Ding

    2014-02-10

    An asymmetrical Fabry-Perot interferometric (AFPI) force sensor is fabricated based on a narrowband reflection of low-reflectivity fiber Bragg grating (LR-FBG) and a broadband Fresnel reflection of the cleaved fiber end. The AFPI sensor includes a section of microfiber made by tapering and it achieves a force sensitivity of 0.221 pm/μN with a tapered microfiber of 40 mm length and 6.1 μm waist diameter. Compared with similar AFPI structure in 125 μm-diameter single mode fiber, the force sensitivity of the microfiber AFPI structure is greatly enhanced due to its smaller diameter and can be optimized for different force scales by controlling the diameter. The fabrication process of the AFPI sensor is simple and cost-effective. The AFPI sensor has better multiplexing capacity than conventional extrinsic fiber-optic Fabry-Perot sensors, while it also release the requirement on the wavelength matching of the FBG-pair-based FPI. PMID:24663648

  17. Annual Report of Delaware's Limited English Proficient (LEP) Students, Staff and Programs, 1999-2000.

    ERIC Educational Resources Information Center

    Beyer, Francine Simmons

    This report presents information on limited English proficient (LEP) students, staff, and programs in Delaware schools during the 1999-2000 school year. It focuses on data collected from a spring 2000 survey distributed to the district LEP contact person in each of Delaware's school districts and charter schools. Results indicated an increase of…

  18. 33 CFR 100.T05-0443 - Safety Zone; Fireworks Display, Delaware River, New Hope, PA.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Safety Zone; Fireworks Display... Safety Zone; Fireworks Display, Delaware River, New Hope, PA. (a) Location. The safety zone will restrict vessel traffic on the Delaware River from operating within 400 yards of a fireworks barge located at...

  19. 75 FR 54026 - Safety Zone; Red Bull Flugtag, Delaware River, Camden, NJ

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-03

    ... Marina and South of the Benjamin Franklin Bridge. The safety zone will restrict vessel traffic from a... Delaware River in an area described as north of the Wiggins Park Marina and south of the Benjamin Franklin... vessel intending to transit East of Anchorage Area 13 in the Delaware River South of the...

  20. The Perceived Readiness of the Graduates of Delaware State University to Transition into the Workforce

    ERIC Educational Resources Information Center

    Scott-Cheatham, Lawita Germaine

    2013-01-01

    This study was designed to explore the perceived readiness of the graduating seniors at Delaware State University to transition from the classroom into the workforce. Delaware State University's undergraduate graduating class of 2012, 547 undergraduate seniors, were invited to participate in an online survey comprised of 23 items--derived…

  1. 33 CFR 110.70 - Chesapeake and Delaware Canal, easterly of Courthouse Point, Md.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Chesapeake and Delaware Canal, easterly of Courthouse Point, Md. 110.70 Section 110.70 Navigation and Navigable Waters COAST GUARD... and Delaware Canal, easterly of Courthouse Point, Md. The waters southerly of a line joining...

  2. 78 FR 68026 - Foreign-Trade Zone (FTZ) 99-Wilmington, Delaware, Notification of Proposed Production Activity...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-13

    ... Section 400.38 of the FTZ Board's regulations. The facility is used for the production of a pharmaceutical... Production Activity, Noramco, Inc., (Pharmaceutical Intermediate), Wilmington, Delaware The Delaware Economic... to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on November...

  3. 78 FR 57573 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Attainment Plan for the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-19

    ... X emission control, New Castle County (effective June 2012). SIP approved May 5, 2012 (77 FR 28489... Plan for the Philadelphia-Wilmington, Pennsylvania-New Jersey-Delaware Nonattainment Area for the 1997... standard (NAAQS) for the Philadelphia-Wilmington, Pennsylvania-New Jersey-Delaware (PA-NJ- DE) PM...

  4. Delaware Technical and Community College Policy Recommendations for Improved Online Courses and Instruction

    ERIC Educational Resources Information Center

    Williams, Andrew James

    2010-01-01

    Delaware Technical and Community College online courses are not properly focused to ensure instructors are effective in improving student achievement. First time online students are not given the proper tools when navigating online courses at the college. The focus at Delaware Tech should be on improving the format which students use when…

  5. 75 FR 9426 - Delaware River and Bay Oil Spill Advisory Committee; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-02

    ... SECURITY Coast Guard Delaware River and Bay Oil Spill Advisory Committee; Meeting AGENCY: Coast Guard, DHS. ACTION: Notice of meeting. SUMMARY: The Delaware River and Bay Oil Spill Advisory Committee (DRBOSAC) will meet in Philadelphia, PA to discuss various issues to improve oil spill prevention and...

  6. 75 FR 18524 - Delaware River and Bay Oil Spill Advisory Committee; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-12

    ... SECURITY Coast Guard Delaware River and Bay Oil Spill Advisory Committee; Meeting AGENCY: Coast Guard, DHS. ACTION: Notice of meeting. SUMMARY: The Delaware River and Bay Oil Spill Advisory Committee (DRBOSAC) will meet in Philadelphia, PA to discuss and approve DRBOSAC's report on oil spill prevention...

  7. 75 FR 12561 - Delaware River and Bay Oil Spill Advisory Committee; Meeting Cancelled

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-16

    ... SECURITY Coast Guard Delaware River and Bay Oil Spill Advisory Committee; Meeting Cancelled AGENCY: Coast Guard, DHS. ACTION: Notice of cancellation of meeting. SUMMARY: The Delaware River and Bay Oil Spill... Federal Register on March 2, 2010 (75 FR 9426) is cancelled. FOR FURTHER INFORMATION CONTACT:...

  8. 75 FR 73116 - Delaware River and Bay Oil Spill Advisory Committee; Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-29

    ... SECURITY Coast Guard Delaware River and Bay Oil Spill Advisory Committee; Meetings AGENCY: Coast Guard, DHS. ACTION: Notice of advisory committee meetings. SUMMARY: The Delaware River and Bay Oil Spill Advisory Committee (DRBOSAC) will meet in Philadelphia, Pennsylvania, to discuss and approve DRBOSAC's report on...

  9. 33 CFR 334.120 - Delaware Bay off Milford Neck; naval aircraft bombing target area.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Delaware Bay off Milford Neck; naval aircraft bombing target area. 334.120 Section 334.120 Navigation and Navigable Waters CORPS OF....120 Delaware Bay off Milford Neck; naval aircraft bombing target area. (a) The danger zone. A...

  10. 33 CFR 334.120 - Delaware Bay off Milford Neck; naval aircraft bombing target area.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Delaware Bay off Milford Neck; naval aircraft bombing target area. 334.120 Section 334.120 Navigation and Navigable Waters CORPS OF....120 Delaware Bay off Milford Neck; naval aircraft bombing target area. (a) The danger zone. A...

  11. 33 CFR 334.120 - Delaware Bay off Milford Neck; naval aircraft bombing target area.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Delaware Bay off Milford Neck; naval aircraft bombing target area. 334.120 Section 334.120 Navigation and Navigable Waters CORPS OF....120 Delaware Bay off Milford Neck; naval aircraft bombing target area. (a) The danger zone. A...

  12. 33 CFR 334.120 - Delaware Bay off Milford Neck; naval aircraft bombing target area.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Delaware Bay off Milford Neck; naval aircraft bombing target area. 334.120 Section 334.120 Navigation and Navigable Waters CORPS OF....120 Delaware Bay off Milford Neck; naval aircraft bombing target area. (a) The danger zone. A...

  13. Evaluation of Delaware Stars for Early Success: Year 1 Report. Research Report

    ERIC Educational Resources Information Center

    Schwartz, Heather L.; Karoly, Lynn A.; Le, Vi-Nhuan; Tamargo, Jennifer; Setodji, Claude Messan

    2014-01-01

    Delaware was in the first group of states to receive a federal grant in 2012 to improve early care and education services and increase the number of infants, toddlers, and preschool-age children in high-quality programs. One component of the state's grant is a rigorous validation process for Delaware Stars for Early Success, a voluntary quality…

  14. Literacy at the Core of the Delaware World Language Immersion Programs

    ERIC Educational Resources Information Center

    Fulton-Archer, Lynn

    2013-01-01

    Certain aspects of the implementation of language immersion programs in Delaware are unique given the state's size, demographics, and role in national education initiatives including Race to the Top, Common Core, and Smarter Balance. The Delaware experience typifies what every state, district, or even school goes through as they try to provide…

  15. 33 CFR 167.173 - Off Delaware Bay: Two-Way Traffic Route.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Off Delaware Bay: Two-Way Traffic... SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Atlantic East Coast § 167.173 Off Delaware Bay: Two-Way...

  16. 33 CFR 167.173 - Off Delaware Bay: Two-Way Traffic Route.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Off Delaware Bay: Two-Way Traffic... SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Atlantic East Coast § 167.173 Off Delaware Bay: Two-Way...

  17. A predictive model for anti-degradation monitoring of the Delaware River mainstem

    EPA Science Inventory

    The non-tidal portion of the Delaware River can be considered to be in minimally disturbed condition, but there is increasing pressure on the watershed. Thus, the primary goal of this research was to develop a monitoring tool that can be used by the Delaware River Basin Commissi...

  18. Sequence stratigraphy of the Pennsylvanian Morrow Formation, northern Delaware basin, New Mexico

    SciTech Connect

    Bay, A.R.; Baltensperger, P.A. )

    1990-05-01

    Stratigraphic sequence analysis of the Pennsylvanian Morrow Formation is a new technique useful in predicting and understanding shifts in sand trends that can help locate Morrow gas reservoirs in the mature northern Delaware basin. Morrow sandstone reservoirs are fluvial deltaic channel fill and transgressive beach deposits that typically are 10-30 ft thick and consistently less than 1 mi wide. Detailed mapping and correlation within the systems tracts of each sequence can high-grade specific areas in the basin for exploration. Based on subsurface log correlations, the Morrow clastics and Atoka carbonates in the northern Delaware basin are interpreted as three stratigraphic sequences bounded by subregional type I unconformities. The post-Mississippian unconformity represents the oldest sequence boundary in the Morrow-to-Atoka succession and formed as the base level dropped and the shoreline shifted at least 50 mi basinward. The uplifted Pedernal Highlands supplied sediment to dip-trending lower Morrow channels that downcut into the exposed Mississippian carbonate ramp surface. The transgressive systems tract in this sequence consists of landward-stepping, wave-dominated deltaic deposit. The Morrow shale, a regionally correlatable organic-rich shale that separates the lower Morrow from the middle Morrow, represents the highstand deposits as base level that rose to a maximum. Another base level drop occurred at the end of Morrow shale deposition and resulted in dip-trending channel-fill sandstones and, stacked landward stepping transgressive beach and offshore ridge deposits oriented parallel to strike. The highstand progradational deposits of this sequence formed a terrace that supplied a shelf margin system of deltaic and slope-apron sediments during the succeeding third sequence. The shelf margin deposits are capped by highstand shelf carbonates of the upper Morrow and lower Atoka.

  19. Estimated ground-water availability in the Delaware River basin, 1997-2000

    USGS Publications Warehouse

    Sloto, Ronald A.; Buxton, Debra E.

    2006-01-01

    Ground-water availability using a watershed-based approach was estimated for the 147 watersheds that make up the Delaware River Basin. This study, conducted by the U.S. Geological Survey in cooperation with the Delaware River Basin Commission (DRBC), supports the DRBC's Water Resources Plan for the Delaware River Basin. Different procedures were used to estimate ground-water availability for the region underlain by fractured rocks in the upper part of the basin and for surficial aquifers in the region underlain by unconsolidated sediments in the lower part of the basin. The methodology is similar to that used for the Delaware River Basin Commission's Ground-Water Protected Area in Pennsylvania. For all watersheds, ground-water availability was equated to average annual base flow. Ground-water availability for the 109 watersheds underlain by fractured rocks in Delaware, New Jersey, New York, and Pennsylvania was based on lithology and physiographic province. Lithology was generalized by grouping 183 geologic units into 14 categories on the basis of rock type and physiographic province. Twenty-three index streamflow-gaging stations were selected to represent the 14 categories. A base-flow-recurrence analysis was used to determine the average annual 2-, 5-, 10-, 25-, and 50-year-recurrence intervals for each index station. A GIS analysis used lithology and base flow at the index stations to determine the average annual base flow for the 109 watersheds. Average annual base flow for these watersheds ranged from 0.313 to 0.915 million gallons per day per square mile for the 2-year-recurrence interval to 0.150 to 0.505 million gallons per day per square mile for the 50-year-recurrence interval. Ground-water availability for watersheds underlain by unconsolidated surficial aquifers was based on predominant surficial geology and land use, which were determined from statistical tests to be the most significant controlling factors of base flow. Twenty-one index streamflow

  20. Polarizable Empirical Force Field for Hexopyranose Monosaccharides Based on the Classical Drude Oscillator

    PubMed Central

    2015-01-01

    A polarizable empirical force field based on the classical Drude oscillator is presented for the hexopyranose form of selected monosaccharides. Parameter optimization targeted quantum mechanical (QM) dipole moments, solute–water interaction energies, vibrational frequencies, and conformational energies. Validation of the model was based on experimental data on crystals, densities of aqueous-sugar solutions, diffusion constants of glucose, and rotational preferences of the exocylic hydroxymethyl of d-glucose and d-galactose in aqueous solution as well as additional QM data. Notably, the final model involves a single electrostatic model for all sixteen diastereomers of the monosaccharides, indicating the transferability of the polarizable model. The presented parameters are anticipated to lay the foundation for a comprehensive polarizable force field for saccharides that will be compatible with the polarizable Drude parameters for lipids and proteins, allowing for simulations of glycolipids and glycoproteins. PMID:24564643

  1. Baseline meteorological soundings for parametric environmental investigations at Kennedy Space Center and Vandenberg Air Force Base

    NASA Technical Reports Server (NTRS)

    Susko, M.; Stephens, J. B.

    1976-01-01

    Meteorological soundings representative of the atmospheric environment at the Kennedy Space Center, Florida and Vandenberg Air Force Base, California, are presented. Synthetic meteorological soundings at Kennedy Space Center, including fall, spring, and a sea breeze, and at Vandenberg Air Force Base (sea breeze with low and high level inversion and stationary upper level troughs) are shown. Soundings of frontal passages are listed. The Titan launch soundings at Kennedy Space Center present a wide range of meteorological conditions, both seasonal and time of day variations. The meteorological data input of altitude, wind speed, wind direction, temperature, and pressure may be used as meteorological inputs for the NASA/MSFC Multilayer Diffusion Model or other models to obtain quantitative estimates of effluent concentrations associated with the potential emission of major combustion products in the lower atmosphere to simulate actual launches of space vehicles. The Titan launch soundings are also of value in terms of rocket effluent measurements for analysis purposes.

  2. Radioactive waste disposal sites: Two successful closures at Tinker Air Force Base

    SciTech Connect

    McKenzie, G.; Mohatt, J.V.; Kowall, S.J.; Jarvis, M.F.

    1993-06-01

    This article describes remediation and closure of two radioactive waste disposal sites at Tinker Air Force Base, Oklahoma, making them exemption regulatory control. The approach consisted of careful exhumation and assessment of soils in sites expected to be contaminated based on historical documentation, word of mouth, and geophysical surveys; removal of buried objects that had gamma radiation exposure levels above background; and confirmation that the soil containing residual radium-226 was below an activity level equal to no more than a 10 mrem/yr annual dose equivalent. In addition, 4464 kg of chemically contaminated excavated soils were removed for disposal. After remediation, the sites met standards for unrestricted use. These sites were two of the first three Air Force radioactive disposal sites to be closed and were the first to be closed under Draft NUREG/CR-5512.

  3. Quantification and probabilistic modeling of CRT obsolescence for the State of Delaware

    SciTech Connect

    Schumacher, Kelsea A.; Schumacher, Thomas; Agbemabiese, Lawrence

    2014-11-15

    Highlights: • We modeled the obsolescence of cathode ray tube devices in the State of Delaware. • 411,654 CRT units or ∼16,500 metric tons have been recycled in Delaware since 2002. • The peak of the CRT obsolescence in Delaware passed by 2012. • The Delaware average CRT recycling rate between 2002 and 13 was approximately 27.5%. • CRTs will continue to infiltrate the system likely until 2033. - Abstract: The cessation of production and replacement of cathode ray tube (CRT) displays with flat screen displays have resulted in the proliferation of CRTs in the electronic waste (e-waste) recycle stream. However, due to the nature of the technology and presence of hazardous components such as lead, CRTs are the most challenging of electronic components to recycle. In the State of Delaware it is due to this challenge and the resulting expense combined with the large quantities of CRTs in the recycle stream that electronic recyclers now charge to accept Delaware’s e-waste. Therefore it is imperative that the Delaware Solid Waste Authority (DSWA) understand future quantities of CRTs entering the waste stream. This study presents the results of an assessment of CRT obsolescence in the State of Delaware. A prediction model was created utilizing publicized sales data, a variety of lifespan data as well as historic Delaware CRT collection rates. Both a deterministic and a probabilistic approach using Monte Carlo Simulation (MCS) were performed to forecast rates of CRT obsolescence to be anticipated in the State of Delaware. Results indicate that the peak of CRT obsolescence in Delaware has already passed, although CRTs are anticipated to enter the waste stream likely until 2033.

  4. Exploration and Resource Assessment at Mountain Home Air Force Base, Idaho Using an Integrated Team Approach

    SciTech Connect

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2012-10-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home AFB.

  5. 33 CFR 334.635 - Hillsborough Bay and waters contiguous to MacDill Air Force Base, Fla.; restricted area.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... defined at 33 CFR 329, within the following boundaries. Commencing from the shoreline at the northeast... contiguous to MacDill Air Force Base, Fla.; restricted area. 334.635 Section 334.635 Navigation and Navigable... REGULATIONS § 334.635 Hillsborough Bay and waters contiguous to MacDill Air Force Base, Fla.; restricted...

  6. 33 CFR 334.635 - Hillsborough Bay and waters contiguous to MacDill Air Force Base, Fla.; restricted area.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... contiguous to MacDill Air Force Base, Fla.; restricted area. 334.635 Section 334.635 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.635 Hillsborough Bay and waters contiguous to MacDill Air Force Base, Fla.; restricted...

  7. 33 CFR 334.635 - Hillsborough Bay and waters contiguous to MacDill Air Force Base, Fla.; restricted area.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... contiguous to MacDill Air Force Base, Fla.; restricted area. 334.635 Section 334.635 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.635 Hillsborough Bay and waters contiguous to MacDill Air Force Base, Fla.; restricted...

  8. New method of space debris cleaning based on light negative force: tractor laser

    NASA Astrophysics Data System (ADS)

    Sun, Qiongge; Gao, Long; Li, Chen

    2016-01-01

    This paper presents a new way of space debris removal and protection, that is, using tractor laser, which based on light negative force, to achieve space debris cleaning and shielded. Tractor laser is traceable from the theory of optical tweezers, accompanied with non-diffraction beam. These kind of optical beams have the force named negative force pointing to optical source, this will bring the object along the trajectory of laser beam moving to the optical source. The negative force leads to the new method to convey and sampling the space micro-objects. In this paper, the application of tractor laser in the space debris collection and protection of 1cm is studied. The application of the several tractor beams in the space debris and sample collection is discussed. The proposed method can reduce the requirements of the laser to the satellite platform, and realize the collection of space debris, make the establishment of the space garbage station possible, and help to study the spatial non contact sample transmission and reduce the risk of space missions.

  9. APT a next generation QM-based reactive force field model

    NASA Astrophysics Data System (ADS)

    Rappé, A. K.; Bormann-Rochotte, L. M.; Wiser, D. C.; Hart, J. R.; Pietsch, M. A.; Casewit, C. J.; Skiff, W. M.

    Modelling reactivity at the nanoscale is a major computational challenge. Both reactive force field and combined QM-MM methodologies have been and are being developed to study reactivity at this boundary between molecules and the solid state. There have been more than 1500 publications since the mid-1990s, on combined QM-MM methodologies. Limitations in current models include the distortional characteristics of force field potential terms, the smooth transit from one potential surface to another, rather than surface hopping, and the blending of electrostatics between QM and MM portions of a QM-MM model. Functional forms, potential surface coupling terms, and parameterization strategies for the Approximate Pair Theory (APT), a next generation reactive force field model, are described. The APT model has been developed to correct a number of limitations in current reactive force field models as well as providing a foundation for a next generation QM-MM model. Chemical bonding concepts are used to develop fully dissociative bond stretch, bend, torsion, and inversion valence terms. Quantum mechanics also provides functional forms for potential surface coupling terms that permit a general description of reactivity from hydrogen bonding, through non-classical carbocations and cracking, to olefin polymerization, oxidation, and metathesis. Van der Waals, electrostatic, and metallic bonding models also derive from quantum mechanical resonance. Finally, Pauli Principle-based orthogonality provides a way to electrostatically couple the QM and MM portions of a QM-MM model that will support arbitrarily large basis sets.

  10. A Physically-Based Estimate of Radiative Forcing by Anthropogenic Sulfate Aerosol

    SciTech Connect

    Ghan, Steven J. ); Easter, Richard C. ); Chapman, Elaine G. ); Abdul-Razzak, Hayder; Zhang, Yang ); Leung, Ruby ); Laulainen, Nels S. ); Saylor, Rick D. ); Zaveri, Rahul A. )

    2001-04-01

    Estimates of direct and indirect radiative forcing by anthropogenic sulfate aerosols from an integrated global aerosol and climate modeling system are presented. A detailed global tropospheric chemistry and aerosol model that predicts concentrations of oxidants as well as aerosols and aerosol precursors, is coupled to a general circulation model that predicts both cloud water mass and cloud droplet number. Both number and mass of several externally-mixed aerosol size modes are predicted, with internal mixing assumed for the different aerosol components within each mode. Predicted aerosol species include sulfate, organic and black carbon, soil dust, and sea salt. The models use physically-based treatments of aerosol radiative properties (including dependence on relative humidity) and aerosol activation as cloud condensation nuclei. Parallel simulations with and without anthropogenic sulfate aerosol are performed for a global domain. The global and annual mean direct and indirect radiative forcing due to anthropogenic sulfate are estimated to be -0.3 to -0.5 and -1.5 to -3.0 W m-2, respectively. The radiative forcing is sensitive to the model's horizontal resolution, the use of predicted vs. analyzed relative humidity, the prediction vs. diagnosis of aerosol number and droplet number, and the parameterization of droplet collision/coalescence. About half of the indirect radiative forcing is due to changes in droplet radius and half to increased cloud liquid water.

  11. Development and precision position/force control of a new flexure-based microgripper

    NASA Astrophysics Data System (ADS)

    Yang, Yi-ling; Wei, Yan-ding; Lou, Jun-qiang; Xie, Feng-ran; Fu, Lei

    2016-01-01

    This paper presents the design, modeling and position/force control of a new piezo-driven microgripper with integrated position and force sensors. The structural design of the microgripper is based on double amplification mechanisms employing the bridge-type mechanism and the parallelogram mechanism. The microgripper can generate a large gripping range and pure translation of the gripping arm. Through the pseudorigid-body-model method, theoretical models are derived. By means of several finite-element analysis simulations, the optimal structural parameters for the microgripper are acquired and the theoretical models are analyzed and validated. Furthermore, to improve the performance of the microgripper, a new hybrid position/force control scheme employing a nonlinear fuzzy logic controller combined with an incremental proportional-integral controller is presented. The control scheme is capable of regulating the position and the gripping force of the microgripper simultaneously. Experimental investigation and validation were performed and the experimental results verify the effectiveness of the developed structural design and the proposed hybrid control scheme.

  12. A model of late quaternary landscape development in the Delaware Valley, New Jersey and Pennsylvania

    NASA Astrophysics Data System (ADS)

    Ridge, John C.; Evenson, Edward B.; Sevon, William D.

    1992-03-01

    In the Delaware Valley of New Jersey and eastern Pennsylvania the late Quaternary history of colluviation, fluvial adjustment, and soil formation is based on the ages of pre-Wisconsinan soils and glacial deposits which are indicated by feld relationships and inferred from mid-latitude climate changes indicated by marine oxygen-isotope records. The area is divided into four terranes characterized by sandstone, gneiss, slate and carbonate rocks. Since the last pre-Wisconsinan glaciation (> 130 ka, inferred to be late Illinoian), each terrane responded differently to chemical and mechanical weathering. During the Sangamon interglacial stage (˜ 130-75 ka) in situ weathering is inferred to have occurred at rates greater than transportation of material which resulted in the formation of deep, highly weathered soil and saprolite, and dissolution of carbonate rocks. Cold climatic conditions during the Wisconsinan, on the other hand, induced erosion of the landscape at rates faster than soil development. Upland erosion during the Wisconsinan removed pre-Wisconsinan soil and glacial sediment and bedrock to produce muddy to blocky colluvium, grézes litées, and alluvial fans on footslopes. Fluvial gravel and overlying colluvium in the Delaware Valley, both buried by late Wisconsinan outwash, are inferred to represent episodes of early and middle Wisconsinan (˜ 75-25 ka) upland erosion and river aggradiation followed by river degradation and colluvium deposition. Early-middle Wisconsinan colluvium is more voluminous than later colluvium despite colder, possibly permafrost conditions during the late Wisconsinan ˜ 25-10 ka). Extensive colluviation during the early and middle Wisconsinan resulted from a longer (50 kyr), generally cold interval of erosion with a greater availability of easily eroded pre-Wisconsinan surficial materials on uplands than during the late Wisconsinan. After recession of late Wisconsinan ice from its terminal position, soil formation and landscape

  13. A model of late quaternary landscape development in the Delaware Valley, New Jersey and Pennsylvania

    USGS Publications Warehouse

    Ridge, J.C.; Evenson, E.B.; Sevon, W.D.

    1992-01-01

    In the Delaware Valley of New Jersey and eastern Pennsylvania the late Quaternary history of colluviation, fluvial adjustment, and soil formation is based on the ages of pre-Wisconsinan soils and glacial deposits which are indicated by feld relationships and inferred from mid-latitude climate changes indicated by marine oxygen-isotope records. The area is divided into four terranes characterized by sandstone, gneiss, slate and carbonate rocks. Since the last pre-Wisconsinan glaciation (> 130 ka, inferred to be late Illinoian), each terrane responded differently to chemical and mechanical weathering. During the Sangamon interglacial stage (??? 130-75 ka) in situ weathering is inferred to have occurred at rates greater than transportation of material which resulted in the formation of deep, highly weathered soil and saprolite, and dissolution of carbonate rocks. Cold climatic conditions during the Wisconsinan, on the other hand, induced erosion of the landscape at rates faster than soil development. Upland erosion during the Wisconsinan removed pre-Wisconsinan soil and glacial sediment and bedrock to produce muddy to blocky colluvium, gre??zes lite??es, and alluvial fans on footslopes. Fluvial gravel and overlying colluvium in the Delaware Valley, both buried by late Wisconsinan outwash, are inferred to represent episodes of early and middle Wisconsinan (??? 75-25 ka) upland erosion and river aggradiation followed by river degradation and colluvium deposition. Early-middle Wisconsinan colluvium is more voluminous than later colluvium despite colder, possibly permafrost conditions during the late Wisconsinan ??? 25-10 ka). Extensive colluviation during the early and middle Wisconsinan resulted from a longer (50 kyr), generally cold interval of erosion with a greater availability of easily eroded pre-Wisconsinan surficial materials on uplands than during the late Wisconsinan. After recession of late Wisconsinan ice from its terminal position, soil formation and

  14. Dissolved methane in groundwater, Upper Delaware River Basin, Pennsylvania and New York, 2007-12

    USGS Publications Warehouse

    Kappel, William M.

    2013-01-01

    The prospect of natural gas development from the Marcellus and Utica Shales has raised concerns about freshwater aquifers being vulnerable to contamination. Well owners are asking questions about subsurface methane, such as, “Does my well water have methane and is it safe to drink the water?” and “Is my well system at risk of an explosion hazard associated with a combustible gas like methane in groundwater?” This newfound awareness of methane contamination of water wells by stray gas migration is based upon studies such as Molofsky and others (2011) who document the widespread natural occurrence of methane in drinking-water wells in Susquehanna County, Pennsylvania. In the same county, Osborn and others (2011) identified elevated methane concentrations in selected drinking-water wells in the vicinity of Marcellus Shale gas-development activities, although pre-development groundwater samples were not available for comparison. A compilation of dissolved methane concentrations in groundwater for New York State was published by Kappel and Nystrom (2012). Recent work documenting the occurrence and distribution of methane in groundwater was completed in southern Sullivan County, Pennsylvania (Sloto, 2013). Additional work is ongoing with respect to monitoring for stray gases in groundwater (Jackson and others, 2013). These studies and their results indicate the importance of collecting baseline or pre-development data. While such data are being collected in some areas, published data on methane in groundwater are sparse in the Upper Delaware River Basin of Pennsylvania, New York, and New Jersey. To manage drinking-water resources in areas of gas-well drilling and hydraulic fracturing in the Upper Delaware River Basin, the natural occurrence of methane in the tri-state aquifers needs to be documented. The purpose of this report is to present data on dissolved methane concentrations in the groundwater in the Upper Delaware River Basin. The scope is restricted to

  15. Solar energy system demonstration project at Wilmington Swim School, New Castle, Delaware. Final report

    SciTech Connect

    1980-07-01

    This document is the Final Report of the Solar Energy System located at the Wilmington, Swim School, New Castle, Delaware. This active solar system is composed of 2,700 square feet of Revere liquid flat plate collectors piped to a 2,800 gallon concrete storage tank located below ground near the building. A micro-computer based control system selects the optimal applications of the stored energy among space, domestic water and pool alternatives. The controlled logic is planned for serving the heat loads in the following order: space heat-new addition, domestic water-entire facility, and pool heating-entire facility. A modified trombe wall passive operation the active system will bypass the areas being served passively. The system was designed for a 40 percent heating and a 30 percent hot water solar contribution.

  16. Fresh-water discharge salinity relations in the tidal Delaware River

    USGS Publications Warehouse

    Keighton, Walter B.

    1966-01-01

    Sustained flows of fresh water greater than 3,500, 4,400, and 5,300 cubic feet per second into the Delaware River estuary at Trenton, NJ assure low salinity at League Island, Eddystone, and Marcus Hook, respectively. When the discharge at Trenton is less than these critical values, salinity is very sensitive to change in discharge, so that a relatively small decrease in fresh-water discharge results in a relatively great increase in salinity. Comparison of the discharge-salinity relations observed for the 14-year period August 1949-December 1963 with relations proposed by other workers but based on other time periods indicate that such relations change with time and that salinity is affected not only by discharge but also by dredging; construction of breakwater, dikes, and tidal barriers; changing sea level; tidal elevation; tidal range; and wind intensity and direction.

  17. Benthic macrofauna productivity enhancement by an artificial reef in Delaware Bay, USA

    SciTech Connect

    Steimle, F; Foster, Karen L.; Kropp, Roy K.; Conlin, B

    2002-10-15

    To understand the potential enhancement value of a habitat-loss mitigation reef in Delaware Bay, especially as a source of food for fishery resources, the secondary productivity of the reef epifauna and nearby sand infauna was estimated and compared. The mean production of natural sand infauna was estimated at between 215 and 249 kcal m(2) yr(-1), while that of the epifauna on the reef surfaces was between 3990 and 9555 kcal m(2) yr(-1). With the 36 m(2) footprint of a reef unit as a basis for comparison, the 407 m(2) of reef unit surface covering that footprint produced 1.62-3.89 X 10(6) kcal yr(-1) of epifauna compared with 7.74-8.96 X 10(3) kcal yr(-1) per footprint area for the adjacent sand infauna. There was, however, substantial annual variability in the productivity of the epifauna, based on the recruitment success of Mytilus edulis.

  18. Some hydrological impacts of climate change for the Delaware River Basin

    USGS Publications Warehouse

    Tasker, Gary D.

    1990-01-01

    To gain insight into possible impacts of climate change on water availability in the Delaware River, two models are linked. The first model is a monthly water balance model that converts the temperature and precipitation values generated by a random number generator to monthly streamflow values. The monthly streamflow values are input to a second model that simulates the operation of reservoirs and diversions within the basin. The output for the two linked models consists of time series of reservoir levels and streamflow at key points in the basin. Model results for a base case, in which monthly temperature and precipitation statistics are unchanged from historical records, are compared to several changed-climate scenarios under a standard set of rules of operation.

  19. Fluorescence-Based Force/Tension Sensors: A Novel Tool to Visualize Mechanical Forces in Structural Proteins in Live Cells

    PubMed Central

    Guo, Jun; Sachs, Frederick

    2014-01-01

    Abstract Significance: Three signaling systems, chemical, electrical, and mechanical, ubiquitously contribute to cellular activities. There is limited information on the mechanical signaling system because of a lack of tools to measure stress in specific proteins. Although significant advances in methodologies such as atomic force microscopy and laser tweezers have achieved great success in single molecules and measuring the mean properties of cells and tissues, they cannot deal with specific proteins in live cells. Recent Advances: To remedy the situation, we developed a family of genetically encoded optical force sensors to measure the stress in structural proteins in living cells. The sensors can be incorporated into specific proteins and are not harmful in transgenic animals. The chimeric proteins distribute and function as their wild-type counterparts, and local stress can be read out from changes in Förster resonance energy transfer (FRET). Critical Issues: Our original sensor used two mutant green fluorescence proteins linked by an alpha helix that served as a linking spring. Ever since, we have improved the probe design in a number of ways. For example, we replaced the helical linker with more common elastic protein domains to better match the compliance of the wild-type hosts. We greatly improved sensitivity by using the angular dependence of FRET rather than the distance dependence as the transduction mechanism, because that has nearly 100% efficiency at rest and nearly zero when stretched. Future Directions: These probes enable researchers to investigate the roles of mechanical force in cellular activities at the level of single molecules, cells, tissues, and whole animals. Antioxid. Redox Signal. 20, 986–999. PMID:24205787

  20. MEMS based Low Cost Piezoresistive Microcantilever Force Sensor and Sensor Module

    PubMed Central

    Pandya, H. J.; Kim, Hyun Tae; Roy, Rajarshi; Desai, Jaydev P.

    2014-01-01

    In the present work, we report fabrication and characterization of a low-cost MEMS based piezoresistive micro-force sensor with SU-8 tip using laboratory made silicon-on-insulator (SOI) substrate. To prepare SOI wafer, silicon film (0.8 µm thick) was deposited on an oxidized silicon wafer using RF magnetron sputtering technique. The films were deposited in Argon (Ar) ambient without external substrate heating. The material characteristics of the sputtered deposited silicon film and silicon film annealed at different temperatures (400–1050°C) were studied using atomic force microscopy (AFM) and X-ray diffraction (XRD) techniques. The residual stress of the films was measured as a function of annealing temperature. The stress of the as-deposited films was observed to be compressive and annealing the film above 1050°C resulted in a tensile stress. The stress of the film decreased gradually with increase in annealing temperature. The fabricated cantilevers were 130 µm in length, 40 µm wide and 1.0 µm thick. A series of force-displacement curves were obtained using fabricated microcantilever with commercial AFM setup and the data were analyzed to get the spring constant and the sensitivity of the fabricated microcantilever. The measured spring constant and sensitivity of the sensor was 0.1488N/m and 2.7mV/N. The microcantilever force sensor was integrated with an electronic module that detects the change in resistance of the sensor with respect to the applied force and displays it on the computer screen. PMID:24855449

  1. MEMS based Low Cost Piezoresistive Microcantilever Force Sensor and Sensor Module.

    PubMed

    Pandya, H J; Kim, Hyun Tae; Roy, Rajarshi; Desai, Jaydev P

    2014-03-01

    In the present work, we report fabrication and characterization of a low-cost MEMS based piezoresistive micro-force sensor with SU-8 tip using laboratory made silicon-on-insulator (SOI) substrate. To prepare SOI wafer, silicon film (0.8 µm thick) was deposited on an oxidized silicon wafer using RF magnetron sputtering technique. The films were deposited in Argon (Ar) ambient without external substrate heating. The material characteristics of the sputtered deposited silicon film and silicon film annealed at different temperatures (400-1050°C) were studied using atomic force microscopy (AFM) and X-ray diffraction (XRD) techniques. The residual stress of the films was measured as a function of annealing temperature. The stress of the as-deposited films was observed to be compressive and annealing the film above 1050°C resulted in a tensile stress. The stress of the film decreased gradually with increase in annealing temperature. The fabricated cantilevers were 130 µm in length, 40 µm wide and 1.0 µm thick. A series of force-displacement curves were obtained using fabricated microcantilever with commercial AFM setup and the data were analyzed to get the spring constant and the sensitivity of the fabricated microcantilever. The measured spring constant and sensitivity of the sensor was 0.1488N/m and 2.7mV/N. The microcantilever force sensor was integrated with an electronic module that detects the change in resistance of the sensor with respect to the applied force and displays it on the computer screen.

  2. Summary and evaluation of hydraulic property data available for Eielson Air Force Base, Alaska

    SciTech Connect

    Spane, F.A. Jr.; Thorne, P.D.

    1994-07-01

    Most of the contaminant source areas at Eielson Air Force Base are located above an unconfined alluvial aquifer with relatively high hydraulic conductivity. Hydraulic tests that have been conducted on wells at the base were evaluated, and in some cases reanalyzed, to determine hydraulic conductivity and specific yield for the aquifer. The reviewed tests included 2 multiple-well pumping tests and 30 slug tests. One slug test was conducted on a well in the bedrock aquifer at Site 38. All the other tests were conducted on the alluvial aquifer.

  3. (Environmental investigation of ground water contamination at Wright- Patterson Air Force Base, Ohio)

    SciTech Connect

    Not Available

    1991-10-01

    This Health and Safety Plan (HSP) was developed for the Environmental Investigation of Ground-water Contamination Investigation at Wright-Patterson Air Force Base near Dayton, Ohio, based on the projected scope of work for the Phase 1, Task 4 Field Investigation. The HSP describes hazards that may be encountered during the investigation, assesses the hazards, and indicates what type of personal protective equipment is to be used for each task performed. The HSP also addresses the medical monitoring program, decontamination procedures, air monitoring, training, site control, accident prevention, and emergency response.

  4. Simulation of nutrient and sediment concentrations and loads in the Delaware inland bays watershed: Extension of the hydrologic and water-quality model to ungaged segments

    USGS Publications Warehouse

    Gutierrez-Magness, Angelica L.

    2006-01-01

    sediment concentrations simulated with the 2003 model were likely the result of inappropriate criteria for the transference of parameter values. From a model-simulation perspective, it is a common practice to transfer parameter values based on the similarity of soils or the similarity of land-use proportions between segments. For the Inland Bays model, the similarity of soils between segments was used as the basis to transfer parameter values. An alternative approach, which is documented in this report, is based on the similarity of the spatial distribution of the land use between segments and the similarity of land-use proportions, as these can be important factors for the transference of parameter values in lumped models. Previous work determined that the difference in the variation of runoff due to various spatial distributions of land use within a watershed can cause substantialloss of accuracy in the model predictions. The incorporation of the spatial distribution of land use to transfer parameter values from calibrated to uncalibrated segments provided more consistent and rational predictions of flow, especially during the summer, and consequently, predictions of lower nutrient concentrations during the same period. For the segments where the similarity of spatial distribution of land use was not clearly established with a calibrated segment, the similarity of the location of the most impervious areas was also used as a criterion for the transference of parameter values. The model predictions from the 28 ungaged segments were verified through comparison with measured in-stream concentrations from local and nearby streams provided by the Delaware Department of Natural Resources and Environmental Control. Model results indicated that the predicted edge-of-stream total suspended solids loads in the Inland Bays watershed were low in comparison to loads reported for the Eastern Shore of Maryland from the Chesapeake Bay watershed model. The flatness of the ter

  5. The Delaware Bay Estuary as a Classroom: A Research Experience for Future Elementary Grade-Level Teachers

    NASA Astrophysics Data System (ADS)

    Madsen, J.; Fifield, S.; Allen, D.; Shipman, H.; Ford, D.; Dagher, Z.; Brickhouse, N.

    2004-05-01

    With supplemental funding from the National Science Foundation (NSF), students from the University of Delaware's Science Semester course took part in a two-day research cruise in the Delaware Bay Estuary. The Science Semester, an NSF-funded project, is an integrated 15-credit sequence that encompasses the entire course work for the spring semester for approximately 60 sophomore-level elementary education majors. The semester includes the earth, life, and physical science content courses and the education science methods course integrated into one curriculum. In this curriculum, problem-based learning and other inquiry-based approaches are applied to foster integrated understandings of science and pedagogy that future elementary teachers need to effectively use inquiry-based approaches in their classrooms. The research cruise was conducted as part of one of the four major investigations during the course. The investigation focused on Delaware's state marine animal, Limulus polyphemus. It is one of the four remaining species of horseshoe crabs; the largest spawning population of Limulus is found in Delaware Bay. Within the problem- and inquiry-based learning approaches of the Science Semester course, the students became aware that very little data exists on the benthic habitat of Limulus polyphemus. In order to learn more about this habitat, a cohort of seven students from the course was recruited as part of the scientific party to take part in the research cruise to collect data on the floor of Delaware Bay. The data included: multibeam bathymetry/backscatter data, grab samples of bay bottom sediments, and CTD profiles. Prior to the cruise, all students in the course took part in laboratory exercises to learn about topographic maps and navigation charts using the Delaware Bay area as the region of study. While "at-sea", the cruise participants sent the ship's latitude and longitude positions as a function of time. The positions were used by the on-land students to

  6. Design and Flight Evaluation of a New Force-Based Flow Angle Probe

    NASA Technical Reports Server (NTRS)

    Corda, Stephen; Vachon, Michael Jacob

    2006-01-01

    A novel force-based flow angle probe was designed and flight tested on the NASA F-15B Research Testbed aircraft at NASA Dryden Flight Research Center. The prototype flow angle probe is a small, aerodynamic fin that has no moving parts. Forces on the prototype flow angle probe are measured with strain gages and correlated with the local flow angle. The flow angle probe may provide greater simplicity, greater robustness, and better access to flow measurements in confined areas relative to conventional moving vane-type flow angle probes. Flight test data were obtained at subsonic, transonic, and supersonic Mach numbers to a maximum of Mach 1.70. Flight conditions included takeoff, landing, straight and level flight, flight at higher aircraft angles of attack, and flight at elevated g-loadings. Flight test maneuvers included angle-of-attack and angle-of-sideslip sweeps. The flow angle probe-derived flow angles are compared with those obtained with a conventional moving vane probe. The flight tests validated the feasibility of a force-based flow angle measurement system.

  7. [The motive force of evolution based on the principle of organismal adjustment evolution.].

    PubMed

    Cao, Jia-Shu

    2010-08-01

    From the analysis of the existing problems of the prevalent theories of evolution, this paper discussed the motive force of evolution based on the knowledge of the principle of organismal adjustment evolution to get a new understanding of the evolution mechanism. In the guide of Schrodinger's theory - "life feeds on negative entropy", the author proposed that "negative entropy flow" actually includes material flow, energy flow and information flow, and the "negative entropy flow" is the motive force for living and development. By modifying my own theory of principle of organismal adjustment evolution (not adaptation evolution), a new theory of "regulation system of organismal adjustment evolution involved in DNA, RNA and protein interacting with environment" is proposed. According to the view that phylogenetic development is the "integral" of individual development, the difference of negative entropy flow between organisms and environment is considered to be a motive force for evolution, which is a new understanding of the mechanism of evolution. Based on such understanding, evolution is regarded as "a changing process that one subsystem passes all or part of its genetic information to the next generation in a larger system, and during the adaptation process produces some new elements, stops some old ones, and thereby lasts in the larger system". Some other controversial questions related to evolution are also discussed.

  8. Radar Scan Strategies for the Patrick Air Force Base Weather Surveillance Radar, Model-74C, Replacement

    NASA Technical Reports Server (NTRS)

    Short, David

    2008-01-01

    The 45th Weather Squadron (45 WS) is replacing the Weather Surveillance Radar, Model 74C (WSR-74C) at Patrick Air Force Base (PAFB), with a Doppler, dual polarization radar, the Radtec 43/250. A new scan strategy is needed for the Radtec 43/250, to provide high vertical resolution data over the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) launch pads, while taking advantage of the new radar's advanced capabilities for detecting severe weather phenomena associated with convection within the 45 WS area of responsibility. The Applied Meteorology Unit (AMU) developed several scan strategies customized for the operational needs of the 45 WS. The AMU also developed a plan for evaluating the scan strategies in the period prior to operational acceptance, currently scheduled for November 2008.

  9. An Atomic Force Microscopy based investigation of specific biomechanical properties for various types of neuronal cells

    NASA Astrophysics Data System (ADS)

    Spedden, Elise; White, James; Kaplan, David; Staii, Cristian

    2012-02-01

    Here we describe the use of Atomic Force Microscope (AFM) based techniques to characterize and explore the influence of biochemical and biomechanical cues on the growth and interaction of neuronal cells with surrounding guidance factors. Specifically, we use AFM topography and AFM force spectroscopy measurements to systematically investigate the morphology, elasticity, and real time growth of neuronal processes in the presence of different types of extracellular matrix proteins and growth factors. We therefore create a series of systems containing specified neuron densities where the type of the underlying growth promoting protein is different from sample to sample. For each system we measure key biomechanical parameters related to neuronal growth such as height and elastic modulus at multiple growth points on several types of neurons. We show that systematic measurements of these parameters yield fundamental information about the role played by substrate-plated guidance factors in determining elastic and morphological properties of neurons during growth.

  10. Bubble-Based Acoustic Radiation Force Using Chirp Insonation to Reduce Standing Wave Effects

    PubMed Central

    Erpelding, Todd N.; Hollman, Kyle W.; O’Donnell, Matthew

    2007-01-01

    Bubble-based acoustic radiation force can measure local viscoelastic properties of tissue. High intensity acoustic waves applied to laser-generated bubbles induce displacements inversely proportional to local Young’s modulus. In certain instances, long pulse durations are desirable but are susceptible to standing wave artifacts, which corrupt displacement measurements. Chirp pulse acoustic radiation force was investigated as a method to reduce standing wave artifacts. Chirp pulses with linear frequency sweep magnitudes of 100, 200, and 300 kHz centered around 1.5 MHz were applied to glass beads within gelatin phantoms and laser-generated bubbles within porcine lenses. The ultrasound transducer was translated axially to vary standing wave conditions, while comparing displacements using chirp pulses and 1.5 MHz tone burst pulses of the same duration and peak rarefactional pressure. Results demonstrated significant reduction in standing wave effects using chirp pulses, with displacement proportional to acoustic intensity and bubble size. PMID:17306697

  11. Central-force decomposition of spline-based modified embedded atom method potential

    NASA Astrophysics Data System (ADS)

    Winczewski, S.; Dziedzic, J.; Rybicki, J.

    2016-10-01

    Central-force decompositions are fundamental to the calculation of stress fields in atomic systems by means of Hardy stress. We derive expressions for a central-force decomposition of the spline-based modified embedded atom method (s-MEAM) potential. The expressions are subsequently simplified to a form that can be readily used in molecular-dynamics simulations, enabling the calculation of the spatial distribution of stress in systems treated with this novel class of empirical potentials. We briefly discuss the properties of the obtained decomposition and highlight further computational techniques that can be expected to benefit from the results of this work. To demonstrate the practicability of the derived expressions, we apply them to calculate stress fields due to an edge dislocation in bcc Mo, comparing their predictions to those of linear elasticity theory.

  12. Force-Based Puncture Detection and Active Position Holding for Assisted Retinal Vein Cannulation*

    PubMed Central

    Gonenc, Berk; Tran, Nhat; Riviere, Cameron N.; Gehlbach, Peter; Taylor, Russell H.; Iordachita, Iulian

    2016-01-01

    Retinal vein cannulation is a demanding procedure proposed to treat retinal vein occlusion by direct therapeutic agent delivery methods. Challenges in identifying the moment of venous puncture, achieving cannulation and maintaining cannulation during drug delivery currently limit the feasibility of the procedure. In this study, we respond to these problems with an assistive system combining a handheld micromanipulator, Micron, with a force-sensing microneedle. The integrated system senses the instant of vein puncture based on measured forces and the position of the needle tip. The system actively holds the cannulation device securely in the vein following cannulation and during drug delivery. Preliminary testing of the system in a dry phantom, stretched vinyl membranes, demonstrates a significant improvement in the total time the needle could be maintained stably inside of the vein. This was especially evident in smaller veins and is attributed to decreased movement of the positioned cannula following venous cannulation. PMID:27127804

  13. Centrifugal Force Based Magnetic Micro-Pump Driven by Rotating Magnetic Fields

    NASA Astrophysics Data System (ADS)

    Kim, S. H.; Hashi, S.; Ishiyama, K.

    2011-01-01

    This paper presents a centrifugal force based magnetic micro-pump for the pumping of blood. Most blood pumps are driven by an electrical motor with wired control. To develop a wireless and battery-free blood pump, the proposed pump is controlled by external rotating magnetic fields with a synchronized impeller. Synchronization occurs because the rotor is divided into multi-stage impeller parts and NdFeB permanent magnet. Finally, liquid is discharged by the centrifugal force of multi-stage impeller. The proposed pump length is 30 mm long and19 mm in diameter which much smaller than currently pumps; however, its pumping ability satisfies the requirement for a blood pump. The maximum pressure is 120 mmHg and the maximum flow rate is 5000ml/min at 100 Hz. The advantage of the proposed pump is that the general mechanical problems of a normal blood pump are eliminated by the proposed driving mechanism.

  14. Annular force based variable curvature mirror aiming to realize non-moving element optical zooming

    NASA Astrophysics Data System (ADS)

    Zhao, Hui; Xie, Xiaopeng; Wei, Jingxuan; Ren, Guorui; Pang, Zhihai; Xu, Liang

    2015-10-01

    Recently, a new kind of optical zooming technique in which no moving elements are involved has been paid much attention. The elimination of moving elements makes optical zooming suitable for applications which has exacting requirements in space, power cost and system stability. The mobile phone and the space-borne camera are two typical examples. The key to realize non-moving elements optical zooming lies in the introduction of variable curvature mirror (VCM) whose radius of curvature could be changed dynamically. When VCM is about to be used to implement optical zoom imaging, two characteristics should be ensured. First, VCM has to provide large enough saggitus variation in order to obtain a big magnification ratio. Second, after the radius of curvature has been changed, the corresponding surface figure accuracy should still be maintained superior to a threshold level to make the high quality imaging possible. In this manuscript, based on the elasticity theory, the physical model of the annular force based variable curvature mirror is established and numerically analyzed. The results demonstrate that when the annular force is applied at the half-the-aperture position, the actuation force is reduced and a smaller actuation force is required to generate the saggitus variation and thus the maintenance of surface figure accuracy becomes easier during the variation of radius of curvature. Besides that, a prototype VCM, whose diameter and thickness are 100mm and 3mm respectively, have been fabricated and the maximum saggitus variation that could be obtained approaches more than 30 wavelengths. At the same time, the degradation of surface figure accuracy is weakly correlated to the curvature radius variation. Keywords: optical zooming; variable curvature mirror; surface figure accuracy; saggitus;

  15. Development of a novel liquid crystal based cell traction force transducer system.

    PubMed

    Soon, C F; Youseffi, M; Berends, R F; Blagden, N; Denyer, M C T

    2013-01-15

    Keratinocyte traction forces play a crucial role in wound healing. The aim of this study was to develop a novel cell traction force (CTF) transducer system based on cholesteryl ester liquid crystals (LC). Keratinocytes cultured on LC induced linear and isolated deformation lines in the LC surface. As suggested by the fluorescence staining, the deformation lines appeared to correlate with the forces generated by the contraction of circumferential actin filaments which were transmitted to the LC surface via the focal adhesions. Due to the linear viscoelastic behavior of the LC, Hooke's equation was used to quantify the CTFs by associating Young's modulus of LC to the cell induced stresses and biaxial strain in forming the LC deformation. Young's modulus of the LC was profiled by using spherical indentation and determined at approximately 87.1±17.2kPa. A new technique involving cytochalasin-B treatment was used to disrupt the intracellular force generating actin fibers, and consequently the biaxial strain in the LC induced by the cells was determined. Due to the improved sensitivity and spatial resolution (∼1μm) of the LC based CTF transducer, a wide range of CTFs was determined (10-120nN). These were found to be linearly proportional to the length of the deformations. The linear relationship of CTF-deformations was then applied in a bespoke CTF mapping software to estimate CTFs and to map CTF fields. The generated CTF map highlighted distinct distributions and different magnitude of CTFs were revealed for polarized and non-polarized keratinocytes. PMID:22809522

  16. Development of a novel liquid crystal based cell traction force transducer system.

    PubMed

    Soon, C F; Youseffi, M; Berends, R F; Blagden, N; Denyer, M C T

    2013-01-15

    Keratinocyte traction forces play a crucial role in wound healing. The aim of this study was to develop a novel cell traction force (CTF) transducer system based on cholesteryl ester liquid crystals (LC). Keratinocytes cultured on LC induced linear and isolated deformation lines in the LC surface. As suggested by the fluorescence staining, the deformation lines appeared to correlate with the forces generated by the contraction of circumferential actin filaments which were transmitted to the LC surface via the focal adhesions. Due to the linear viscoelastic behavior of the LC, Hooke's equation was used to quantify the CTFs by associating Young's modulus of LC to the cell induced stresses and biaxial strain in forming the LC deformation. Young's modulus of the LC was profiled by using spherical indentation and determined at approximately 87.1±17.2kPa. A new technique involving cytochalasin-B treatment was used to disrupt the intracellular force generating actin fibers, and consequently the biaxial strain in the LC induced by the cells was determined. Due to the improved sensitivity and spatial resolution (∼1μm) of the LC based CTF transducer, a wide range of CTFs was determined (10-120nN). These were found to be linearly proportional to the length of the deformations. The linear relationship of CTF-deformations was then applied in a bespoke CTF mapping software to estimate CTFs and to map CTF fields. The generated CTF map highlighted distinct distributions and different magnitude of CTFs were revealed for polarized and non-polarized keratinocytes.

  17. Quantification and probabilistic modeling of CRT obsolescence for the State of Delaware.

    PubMed

    Schumacher, Kelsea A; Schumacher, Thomas; Agbemabiese, Lawrence

    2014-11-01

    The cessation of production and replacement of cathode ray tube (CRT) displays with flat screen displays have resulted in the proliferation of CRTs in the electronic waste (e-waste) recycle stream. However, due to the nature of the technology and presence of hazardous components such as lead, CRTs are the most challenging of electronic components to recycle. In the State of Delaware it is due to this challenge and the resulting expense combined with the large quantities of CRTs in the recycle stream that electronic recyclers now charge to accept Delaware's e-waste. Therefore it is imperative that the Delaware Solid Waste Authority (DSWA) understand future quantities of CRTs entering the waste stream. This study presents the results of an assessment of CRT obsolescence in the State of Delaware. A prediction model was created utilizing publicized sales data, a variety of lifespan data as well as historic Delaware CRT collection rates. Both a deterministic and a probabilistic approach using Monte Carlo Simulation (MCS) were performed to forecast rates of CRT obsolescence to be anticipated in the State of Delaware. Results indicate that the peak of CRT obsolescence in Delaware has already passed, although CRTs are anticipated to enter the waste stream likely until 2033. PMID:25130982

  18. Application of automated multispectral analysis to Delaware's coastal vegetation mapping

    NASA Technical Reports Server (NTRS)

    Klemas, V. (Principal Investigator); Daiber, D.; Bartlett, D. S.; Crichton, O. W.; Fornes, A. O.

    1973-01-01

    There are no author-identified significant results in this report. Overlay maps of Delaware's wetlands have been prepared, showing the dominant species or group of species of vegetation present. Five such categories of vegetation were used indicating marshes dominated by: (1) salt marsh cord grass; (2) salt marsh hay and spike grass; (3) reed grass; (4) high tide bush and sea myrtle; and (5) a group of fresh water species found in impounded areas built to attract water fowl. Fifteen such maps cover Delaware's wetlands from the Pennsylvania to the Maryland borders. The mapping technique employed utilizes the General Electric multispectral data processing system. This system is a hybrid analog-digital system designed as an analysis tool to be used by an operator whose own judgment and knowledge of ground truth can be incorporated at any time into the analyzing process. The result is a high speed, cost effective method for producing enhanced photomaps showing a number of spectral classes, each enhanced spectral class being representative of a vegetative species or group of species.

  19. Teen mothers, unintended pregnancies, and costs across Delaware.

    PubMed

    Maiden, Kristin; Gunter, Whitney D; Martin, Steven S; Ehrenthal, Deborah B

    2014-04-01

    The present study used data from several sources to 1) present information on mothers and births in a single state (Delaware); 2) present cost data to estimate health-related birth real costs; and 3) use the data to estimate the costs and impact on mothers, health care providers, and taxpayers. In addition, this study explicitly examined costs of births through the lens of unplanned/unintended teen and young adult births. Concomitantly, the medical cost of these pregnancies for most of these young mothers who had not wanted to be pregnant at the time, was paid for through the state's Medicaid program. The percentage of Medicaid funded births was much higher for young mothers than for older mothers. Ultimately, it was estimated that young teen (age 17 and under) births cost about $4.0 million each year, older teens (18-20) births $14.0 million, and young adults (21-24) over $26 million. The State funded almost 75 percent of the health care costs of young teen pregnancy prenatal care, deliveries, and newborn care, through Medicaid. And over 75 percent of these Medicaid costs are for births that were unintended at the time. The cost of unintended teen and young adult births funded through Medicaid in Delaware was approximately $25 million annually.

  20. Selected Streamflow Statistics for Streamgaging Stations in Delaware, 2003

    USGS Publications Warehouse

    Ries, Kernell G.

    2004-01-01

    Flow-duration and low-flow frequency statistics were calculated for 15 streamgaging stations in Delaware, in cooperation with the Delaware Geological Survey. The flow-duration statistics include the 1-, 2-, 5-, 10-, 20-, 30-, 40-, 50-, 60-, 70-, 80-, 90-, 95-, 98-, and 99-percent duration discharges. The low-flow frequency statistics include the average discharges for 1, 7, 14, 30, 60, 90, and 120 days that recur, on average, once in 1.01, 2, 5, 10, 20, 50, and 100 years. The statistics were computed using U.S. Geological Survey computer programs that can be downloaded from the World Wide Web at no cost. The computer programs automate standard U.S. Geological Survey methods for computing the statistics. Documentation is provided at the Web sites for the individual programs. The computed statistics are presented in tabular format on a separate page for each station, along with the station name, station number, the location, the period of record, and remarks.

  1. Modeling the Effects of Land Use and Climate Change on Streamflow in the Delaware River Basin

    NASA Astrophysics Data System (ADS)

    Kwon, P. Y. S.; Endreny, T. A.; Kroll, C. N.; Williamson, T. N.

    2014-12-01

    Forest-cover loss and drinking-water reservoirs in the upper Delaware River Basin of New York may alter summer low streamflows, which could degrade the in-stream habitat for the endangered dwarf wedgemussel. Our project analyzes how flow statistics change with land-cover change for 30-year increments of model-simulated streamflow hydrographs for three watersheds of concern to the National Park Service: the East Branch, West Branch, and main stem of the Delaware River. We use four treatments for land cover ranging from historical high to low forest cover. We subject each land cover to adjusted GCM climate scenarios for 1600, 1900, 1940, and 2040 to isolate land cover from potential climate-change effects. Hydrographs are simulated using the Water Availability Tool for Environmental Resources (WATER), a TOPMODEL-based United States Geological Survey hydrologic decision-support tool, which uses the variable-source-area concept and water budgets to generate streamflow. Model parameters for each watershed change with land-use, and capture differences in soil-physical properties that control how rainfall infiltrates, evaporates, transpires, is stored in the soil, and moves to the stream. Our results analyze flow statistics used as indicators of hydrologic alteration, and access streamflow events below the critical flow needed to provide sustainable habitat for dwarf wedgemussels. These metrics will demonstrate how changes in climate and land use might affect flow statistics. Initial results show that the 1940 WATER simulation outputs generally match observed unregulated low flows from that time period, while performance for regulated flow from the same time period and from 1600, 1900, and 2040 require model input adjustments. Our study will illustrate how increased forest cover could potentially restore in-stream habitat for the endangered dwarf wedgemussel for current and future climate conditions.

  2. Phosphate reactivity in long-term poultry litter-amended southern Delaware sandy soils

    USGS Publications Warehouse

    Arai, Y.; Livi, K.J.T.; Sparks, D.L.

    2005-01-01

    Eutrophication caused by dissolved P from poultry litter (PL)-amended agricultural soils has been a serious environmental concern in the Delaware-Maryland-Virginia Peninsula (Delmarva), USA. To evaluate state and federal nutrient management strategies for reducing the environmental impact of soluble P from long-term PL-amended Delaware (DE) soils, we investigated (i) inorganic P speciation; (ii) P adsorption capacity; and (iii) the extent of P desorption. Although the electron microprobe (EMP) analyses showed a strong correlation between P and Al/Fe, crystalline Al/Fe-P precipitates were not detected by x-ray diffraction (XRD). Instead, the inorganic P fractionation analyses showed high levels of oxalate extractable P, Al, and Fe fractions (615-858, 1215-1478, and 337-752 mg kg-1, respectively), which were susceptible to slow release during the long-term (30-d) P desorption experiments at a moderately acidic soil pHwater. The labile P in the short-term (24-h) desorption studies was significantly associated with oxalate and F extractable Fe and Al, respectively. This was evident in an 80% reduction maximum in total desorbable P from NH4 oxalate/F pretreated soils. In the adsorption experiments, P was strongly retained in soils at near targeted pH of lime (???6.0), but P adsorption gradually decreased with decreasing pH near the soil pHwater (???5.0). The overall findings suggest that P losses from the can be suppressed by an increase in the P retention capacity of soils via (i) an increase in the number of lime applications to maintain soil pHwater at near targeted pH values, and/or (ii) alum/iron sulfate amendments to provide additional Al- and Fe-based adsorbents. ?? Soil Science Society of America.

  3. Interparticle force based methodology for prediction of cohesive powder flow properties

    NASA Astrophysics Data System (ADS)

    Esayanur, Madhavan Sujatha Sarma

    The transport and handling of powders are key areas in the process industry that have a direct impact on the efficiency and/or the quality of the finished product. A lack of fundamental understanding of powder flow properties as a function of operating variables such as relative humidity, and particle size, leading to problems such as arching, rat-holing and segregation, is one the main causes for unscheduled down times in plant operation and loss of billions of dollars in revenues. Most of the current design strategies and characterization techniques for industrial powders are based on a continuum approach similar to the field of soil mechanics. Due to an increase in complexity of the synthesis process and reduction in size of powders to the nanoscale, the surface properties and inter particle forces play a significant role in determining the flow characteristics. The use of ensemble techniques such as direct shear testing to characterize powders are no longer adequate due to lack of understanding of the changes in the property of powders as a function of the major operating variables such as relative humidity, temperature etc. New instrumentation or techniques need to be developed to reliably characterize powder flow behavior. Simultaneously, scalability of the current models to predict powder flow needs to be revisited. Specifically, this study focuses on the development of an inter particle force based model for predicting the unconfined yield strength of cohesive powders. To understand the role of interparticle forces in determining the strength of cohesive powders, the particle scale interactions were characterized using Atomic Force Microscopy (AFM), contact angle, surface tension, and coefficient of friction. The bulk scale properties such as unconfined yield strength, packing structure, and size of the shear zone were also investigated. It was determined that an interparticle force based model incorporating the effect of particle size and packing structure

  4. Acid-base site detection and mapping on solid surfaces by Kelvin force microscopy (KFM).

    PubMed

    Gouveia, Rubia F; Bernardes, Juliana S; Ducati, Telma R D; Galembeck, Fernando

    2012-12-01

    Electrostatic potential at the surface of acidic or basic solids changes under higher relative humidity (RH), as determined by using Kelvin force microscopy (KFM). The potential on acid surfaces becomes more negative as the water vapor pressure increases, while it becomes more positive on basic solids. These results verify the following hypothesis: OH(-) or H(+) ions associated with atmospheric water ion clusters are selectively adsorbed on solid surfaces, depending on the respective Brønsted acid or base character. Therefore, Kelvin microscopy, under variable humidity, is a rigorous but convenient alternative to determine the acid-base character of solid surfaces, with a great advantage: it uses only one amphoteric and simple reagent to determine both the acid and base sites. Moreover, this technique provides information on the spatial distribution of acid-base sites, which is currently inaccessible to any other method.

  5. Patrick Air Force Base integrated resource assessment. Volume 2, Baseline detail

    SciTech Connect

    Wahlstrom, R.R.; King, D.A.; Parker, S.A.; Sandusky, W.F.

    1993-08-01

    The US Air Force has tasked the Pacific Northwest Laboratory (PNL), in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to assess energy use at Patrick Air Force Base (AFB). The information obtained from this assessment will be used in identifying energy resource opportunities to reduce overall energy consumption on the base. The primary focus of this report is to assess the current baseline energy consumption at Patrick AFB. It is a comparison report to Volume 1, the Executive Summary, and Volume 3, the Resource Assessment. This assessment requires that information be obtained and characterized for buildings, utilities, energy sources, energy uses, and load profile information to be used to improve the characterization of energy use on the base. The characteristics of electricity, natural gas, and No. 2 fuel oil are analyzed for on-base facilities and housing. The assessment examines basic regional information used to determine energy-use intensity (EUI) values for Patrick AFB facilities by building, fuel type, and energy end use. It also provides a summary of electricity consumption from Florida Power and Light Company (FPL) metered data for 1985-1991. Load profile information obtained from FPL data is presented for the north and south substations for the four seasons of the year, including weekdays and weekends.

  6. Sting-free Unsteady Flowfield, Base Pressure and Force Measurements on Axisymmetric Bluff-Body

    NASA Astrophysics Data System (ADS)

    Higuchi, Hiroshi; Sawada, Hideo; Kato, Hiroyuki; Kunimasu, Tetsuya

    2006-11-01

    To avoid interference of model support, flowfields as well as aerodynamic force and base pressure on blunt short cylinders in axial flow were measured at Re=100,000 with the JAXA 60cm magnetic suspension and balance system. The fineness ratio ranged from 1.27 to 1.79. A digital telemeter system was developed for the base pressure measurement, and the velocity field was obtained using a PIV system. Vortices along separating shear layer and shear layer flappings with or without reattachment on the wall were observed. Downstream the cylinder in the azimuthal plane, PIV snapshots showed large-scale motion of longitudinal vortices. These instantaneous flowfields presented excellent axisymmetry when they were ensemble-averaged. Mean base pressure agreed with the drag variation at different fineness ratios. The present magnetic suspension and balance system allowed evaluation of low frequency unsteady aerodynamic force vector from feedback current to the coils and the detected small model movement. Base pressure fluctuations were compared with the drag fluctuations and discussed in light of overall flowfield phenomena.

  7. Fall 1994 wildlife and vegetation survey, Norton Air Force Base, California

    SciTech Connect

    Not Available

    1994-12-15

    The fall 1994 wildlife and vegetation surveys were completed October 3-7, 1994, at Norton Air Force Base (AFB), California. Two biologists from CDM Federal Programs, the U.S. Environmental Protection Agency (EPA) regional biologist and the Oak Ridge National Laboratory (ORNL) lead biologist conducted the surveys. A habitat assessment of three Installation Restoration Project (IRP) sites at Norton Air Force Base was also completed during the fall survey period. The IRP sites include: Landfill No. 2 (Site 2); the Industrial Wastewater Treatment Plant (IWTP) area; and Former Fire Training Area No. 1 (Site 5). The assessments were designed to qualitatively characterize the sites of concern, identify potential ecological receptors, and provide information for Remedial Design/Remedial Action activities. A Reference Area (Santa Ana River Wash) and the base urban areas were also characterized. The reference area assessment was performed to provide a baseline for comparison with the IRP site habitats. The fall 1994 survey is the second of up to four surveys that may be completed. In order to develop a complete understanding of all plant and animal species using the base, these surveys were planned to be conducted over four seasons. Species composition can vary widely during the course of a year in Southern California, and therefore, seasonal surveys will provide the most complete and reliable data to address changes in habitat structure and wildlife use of the site. Subsequent surveys will focus on seasonal wildlife observations and a spring vegetation survey.

  8. Groundwater level and nitrate concentration trends on Mountain Home Air Force Base, southwestern Idaho

    USGS Publications Warehouse

    Williams, Marshall L.

    2014-01-01

    Mountain Home Air Force Base in southwestern Idaho draws most of its drinking water from the regional aquifer. The base is located within the State of Idaho's Mountain Home Groundwater Management Area and is adjacent to the State's Cinder Cone Butte Critical Groundwater Area. Both areas were established by the Idaho Department of Water Resources in the early 1980s because of declining water levels in the regional aquifer. The base also is listed by the Idaho Department of Environmental Quality as a nitrate priority area. The U.S. Geological Survey, in cooperation with the U.S. Air Force, began monitoring wells on the base in 1985, and currently monitors 25 wells for water levels and 17 wells for water quality, primarily nutrients. This report provides a summary of water-level and nitrate concentration data collected primarily between 2001 and 2013 and examines trends in those data. A Regional Kendall Test was run to combine results from all wells to determine an overall regional trend in water level. Groundwater levels declined at an average rate of about 1.08 feet per year. Nitrate concentration trends show that 3 wells (18 percent) are increasing in nitrate concentration trend, 3 wells (18 percent) show a decreasing nitrate concentration trend, and 11 wells (64 percent) show no nitrate concentration trend. Six wells (35 percent) currently exceed the U.S. Environmental Protection Agency's maximum contaminant limit of 10 milligrams per liter for nitrate (nitrite plus nitrate, measured as nitrogen).

  9. Spatial pattern of hormone and antibiotic concentrations in surface waters in Delaware

    NASA Astrophysics Data System (ADS)

    Vaicunas, R.; Inamdar, S. P.; Dutta, S.; Aga, D.; Zimmerman, L. R.

    2011-12-01

    Water quality surveys of the U.S. have confirmed the presence of hormones and antibiotics in some surface waters. Although the reported concentrations of these substances are extremely low, there is substantial concern about their effect on aquatic species. For example, chronic exposure to estradiol (E2β) concentrations as low as 40 ng/L have been shown to cause endocrine disruption in fish. Furthermore, there is potential for contaminants to enter our drinking supply. Significant sources of hormones and antibiotics include discharge from concentrated animal feeding operations (CAFOs) and wastewater treatment plants as well as runoff from agricultural land receiving application of animal manure. Since Sussex County, Delaware is one of the leading poultry producing counties in the nation, and many farmers in the state use poultry litter as fertilizer for their crops, it is critical to study the concentrations of contaminants in surface waters. Fifty surface water (streams, lakes, and ponds) sampling locations throughout the state of Delaware were chosen based on DNREC (Delaware Department of Natural Resources and Environmental Control) data. Locations with the highest nitrogen and phosphorus levels were assumed to be associated with agriculture and wastewater sources and therefore were likely to be contaminated with hormones and antibiotics. The first set of sampling occurred in April representing high-flow conditions, and the second set will occur in September representing low-flow conditions. Water samples will be screened through the cost-effective enzyme-linked immunosorbent assay (ELISA) method followed by more rigorous analyses of selected samples using liquid chromatography-mass spectrometry (LC/MS/MS). ELISA screening includes estradiol (E2β), sulfamethazine and triclosan, while LC/MS/MS will quantify both free and conjugated forms of estrone (E1), estradiol (E2β), estriol (E3), as well as selected sulfa and tetracycline antibiotics. Initial ELISA results

  10. Decadal Change in Forest Carbon Stocks in the Delaware River Basin

    NASA Astrophysics Data System (ADS)

    Xu, B.; Plante, A. F.; Pan, Y.; Johnson, A. H.

    2013-12-01

    Forest carbon dynamics at different scales are controlled by different factors, which may alter the forest structure and processes. Long-term measurements of biomass and soil carbon stocks in a nested watershed DRB provide good opportunity for monitoring forest carbon dynamics at multiple scale, calibrating a regional forest process model, and exploring the carbon-water interaction. The Delaware River Basin (DRB) is an ideal watershed for forest carbon cycle research because the basin features diverse forest types and land-use history, and includes physiographic provinces representative of the eastern US. In 2001-2003, the Delaware River Basin Monitoring and Research Initiative established 66 forest plots in three intensive monitoring research sites (nested sub-watersheds in DRB) using Forest Service inventory protocols and enhanced measurements. Mean biomass carbon density was 235.7 × 93.7 Mg C ha-1 in French Creek, 193.2 × 83.9 Mg C ha-1 in Delaware Water Gap, and 264.7 × 74.4 Mg C ha-1 in Neversink River Basin. Soil carbon density (including forest floor and mineral soil to depth of 20 cm) was 80.1 Mg C ha-1, 85.4 Mg C ha-1, and 88.6 Mg C ha-1, respectively. These plots were revisited and re-measured in 2012-2013. In French Creek, where the biomass remeasurement was conducted in fall 2012, results show that, the average biomass carbon density increased by 17.9 Mg C ha-1 over the past decade. Changes in live biomass (live tree, sapling, shrub, herb etc.) and dead biomass (dead tree, coarse woody debris, litter, duff etc.) contribute equally to the total biomass change. However, in a few plots total biomass carbon density decreased by 7.6 to 43.1 Mg C ha-1 due to disturbance from logging or invasive species. Based on the preliminary result, the different effects of climatic, topographic and geological factors on carbon stocks could be detected among the small watersheds. But within a watershed, changes in biomass and soil carbon stocks may depend mainly on

  11. The National Map - Delaware Pilot Project

    USGS Publications Warehouse

    ,

    2001-01-01

    Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

  12. Comparison of NLDAS Weather Forcing Data with Ground-based Measurements in Irrigated Areas of Utah

    NASA Astrophysics Data System (ADS)

    Neale, C. M.; Geli, H. M.; Lewis, C. S.; Verdin, J. P.; Senay, G. B.

    2012-12-01

    This analysis is being conducted in the context of standardizing and providing guidelines for the production of evapotranspiration (ET) and crop water use maps in the Western United States, a project funded by the USGS. Spatial ET maps can be obtained using remote sensing-based methods at field/local scales. There are presently different remote sensing methods in the literature that provide reasonable levels of accuracy at these scales. Most of these methods use weather data from ground-based weather stations in the area being modeled with the assumption of being reasonably representative of the local conditions. Ground-based stations are generally sparse in nature for various reasons. However, at regional/continental scales this assumption will not be applicable and requires the use of other approaches to account for the variability of the near surface weather conditions. The North American Land Data Assimilation System (NLDAS) which provides gridded weather forcing data can potentially provide such information. These NLDAS data are available at 1/8th of a degree grid (~ 14 km × 14 km) a relatively coarse resolution considering the requirement of estimating ET at field scales. In order to use the NLDAS weather forcing data in remote sensing of ET at field to regional scales with increased confidence, it is important to compare it with ground-based observations under different surface conditions. Such comparison will help to identify the associated uncertainties and biases. It can also help to quantify the uncertainties in the remote sensing-based model estimates of ET. This study presents a preliminary result the comparison between ground-based weather data to the NLDAS gridded products in irrigated areas. Ground-based data from about 24 stations in and around the state of Utah, maintained by the National Weather Service and Utah State University, are used in the analysis. The comparison considered both hourly and daily data. These stations were operated over

  13. Robins Air Force Base Integrated Resource Assessment. Volume 2, Baseline Detail

    SciTech Connect

    Keller, J.M.; Sullivan, G.P.; Wahlstrom, R.R.; Larson, L.L.

    1993-08-01

    This report documents the assessment of baseline energy use at Robins Air Force Base (AFB), a US Air Force Materiel Command facility located near Macon, Georgia. This is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Air Force Materiel Command (AFMC) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Robins AFB. This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Robins AFB. The analysis examines the characteristics of electric, natural gas, oil, propane, and wood chip use for fiscal year 1991. The results include energy-use intensities for the facilities at Robins AFB by building type, fuel type, and energy end use. A complete energy consumption reconciliation is presented that accounts for the distribution of all major energy uses and losses among buildings, utilities, and central systems.

  14. Shemya Air Force Base, Alaska No Further Action Decision document for Hg-1. Final report

    SciTech Connect

    Not Available

    1993-03-05

    This document is being prepared to document that a No Further Action Decision (NFAD) document is appropriate for the Hg-1 site at Shemya Air Force Base (AFB), Alaska, under the Air Force Installation Restoration Program (IRP). The IRP is a Department of Defense (DOD) program established to identify and remediate hazardous waste problems on DOD property that result from past practices. The Alaska Department of Environmental Conservation (ADEC) draft document {open_quotes}No Further Action Criteria for DOD Military/FUD Sites{close_quotes} has been used as a guide in preparing this document. Air Force personnel have stated that the Hg-1 site may have been used to store mercury and PCB-contaminated material. The site was added to the IRP in 1987, and later that year a field investigation was conducted at the site. Soil samples were collected and analyzed for mercury, EP toxicity, polychlorinated biphenyls (PCBs), and dioxin. All concentrations of contaminants found in Area Hg-1 are below regulatory action levels for PCBs (40 CFR 761) and mercury (55 FR 30798) or below detection levels for dioxin/furans. Therefore, leaving these soils in place is acceptable.

  15. Shemya Air Force Base, Alaska No Further Action Decision document for Hg-1

    SciTech Connect

    Not Available

    1993-03-05

    This document is being prepared to document that a No Further Action Decision (NFAD) document is appropriate for the Hg-1 site at Shemya Air Force Base (AFB), Alaska, under the Air Force Installation Restoration Program (IRP). The IRP is a Department of Defense (DOD) program established to identify and remediate hazardous waste problems on DOD property that result from past practices. The Alaska Department of Environmental Conservation (ADEC) draft document [open quotes]No Further Action Criteria for DOD Military/FUD Sites[close quotes] has been used as a guide in preparing this document. Air Force personnel have stated that the Hg-1 site may have been used to store mercury and PCB-contaminated material. The site was added to the IRP in 1987, and later that year a field investigation was conducted at the site. Soil samples were collected and analyzed for mercury, EP toxicity, polychlorinated biphenyls (PCBs), and dioxin. All concentrations of contaminants found in Area Hg-1 are below regulatory action levels for PCBs (40 CFR 761) and mercury (55 FR 30798) or below detection levels for dioxin/furans. Therefore, leaving these soils in place is acceptable.

  16. GROMOS 53A6GLYC, an Improved GROMOS Force Field for Hexopyranose-Based Carbohydrates.

    PubMed

    Pol-Fachin, Laercio; Rusu, Victor H; Verli, Hugo; Lins, Roberto D

    2012-11-13

    An improved parameter set for explicit-solvent simulations of carbohydrates (referred to as GROMOS 53A6GLYC) is presented, allowing proper description of the most stable conformation of all 16 possible aldohexopyranose-based monosaccharides. This set includes refinement of torsional potential parameters associated with the determination of hexopyranose rings conformation by fitting to their corresponding quantum-mechanical profiles. Other parameters, as the rules for third and excluded neighbors, are taken directly from the GROMOS 53A6 force field. Comparisons of the herein presented parameter set to our previous version (GROMOS 45A4), the GLYCAM06 force field, and available NMR data are presented in terms of ring puckering free energies, conformational distribution of the hydroxymethyl group, and glycosidic linkage geometries for 16 selected monosaccharides and eight disaccharides. The proposed parameter modifications have shown a significant improvement for the above-mentioned quantities over the two tested force fields, while retaining full compatibility with the GROMOS 53A6 and 54A7 parameter sets for other classes of biomolecules. PMID:26605624

  17. Measuring protein isoelectric points by AFM-based force spectroscopy using trace amounts of sample.

    PubMed

    Guo, Shifeng; Zhu, Xiaoying; Jańczewski, Dominik; Lee, Serina Siew Chen; He, Tao; Teo, Serena Lay Ming; Vancso, G Julius

    2016-09-01

    Protein charge at various pH and isoelectric point (pI) values is important in understanding protein function. However, often only trace amounts of unknown proteins are available and pI measurements cannot be obtained using conventional methods. Here, we show a method based on the atomic force microscope (AFM) to determine pI using minute quantities of proteins. The protein of interest is immobilized on AFM colloidal probes and the adhesion force of the protein is measured against a positively and a negatively charged substrate made by layer-by-layer deposition of polyelectrolytes. From the AFM force-distance curves, pI values with an estimated accuracy of ±0.25 were obtained for bovine serum albumin, myoglobin, fibrinogen and ribonuclease A over a range of 4.7-9.8. Using this method, we show that the pI of the 'footprint' of the temporary adhesive proteins secreted by the barnacle cyprid larvae of Amphibalanus amphitrite is in the range 9.6-9.7. PMID:27454881

  18. A Polarizable Multipole-based Force Field for Dimethyl and Trimethyl Phosphate

    PubMed Central

    Zhang, Changsheng; Lu, Chao; Wang, Qiantao; Ponder, Jay W.; Ren, Pengyu

    2016-01-01

    Using quantum mechanical studies and liquid phase simulations, the AMOEBA force field for dimethylphosphate (DMP) ion and trimethylphosphate (TMP) has been developed. Based on ab initio calculations, it was found that ion binding and the solution environment significantly impact both the molecular geometry and the energy differences between conformations. Atomic multipole moments are derived from MP2/cc-pVQZ calculations of methyl phosphates at several conformations with accounting of chemical environments. Many-body polarization is handled via a Thole-style induction model using distributed atomic polarizabilities. Van der Waals parameters of phosphate and oxygen atoms are determined by fitting to the quantum mechanical interaction energy curves for water with DMP or TMP. Additional stretch-torsion and angle-torsion coupling terms were introduced in order to capture asymmetry in P-O bond lengths and angles due to the generalized anomeric effect. The resulting force field for DMP and TMP is able to accurately describe both the molecular structure and conformational energy surface, including bond and angle variations with conformation, as well as interaction of both species with water and metal ions. The force field was further validated for liquid TMP by comparing simulated density and heat of vaporization values with experimental data. Structural insight obtained from MD simulations indicates liquid TMP is stabilized by both nonpolar-nonpolar contacts and hydrogen bonding. The current study is an important step towards developing the AMOEBA model for nucleic acids. PMID:26574325

  19. Comparison of Brownian-dynamics-based estimates of polymer tension with direct force measurements.

    PubMed

    Arsenault, Mark E; Purohit, Prashant K; Goldman, Yale E; Shuman, Henry; Bau, Haim H

    2010-11-01

    With the aid of brownian dynamics models, it is possible to estimate polymer tension by monitoring polymers' transverse thermal fluctuations. To assess the precision of the approach, brownian dynamics-based tension estimates were compared with the force applied to rhodamine-phalloidin labeled actin filaments bound to polymer beads and suspended between two optical traps. The transverse thermal fluctuations of each filament were monitored with a CCD camera, and the images were analyzed to obtain the filament's transverse displacement variance as a function of position along the filament, the filament's tension, and the camera's exposure time. A linear Brownian dynamics model was used to estimate the filament's tension. The estimated force was compared and agreed within 30% (when the tension <0.1 pN ) and 70% (when the tension <1 pN ) with the applied trap force. In addition, the paper presents concise asymptotic expressions for the mechanical compliance of a system consisting of a filament attached tangentially to bead handles (dumbbell system). The techniques described here can be used for noncontact estimates of polymers' and fibers' tension.

  20. Bis(terpyridine)-based surface template structures on graphite: a force field and DFT study.

    PubMed

    Künzel, Daniela; Markert, Thomas; Gross, Axel; Benoit, David M

    2009-10-21

    Host-guest networks formed by ordered organic layers are promising candidates for applications in molecular storage and quantum computing. We have studied 2-dimensionally ordered surface template structures of bis(terpyridine)-derived molecules (BTPs) on graphite using force field and DFT methods and compared the results to recent experimental observations. In order to determine the force field best suited for surface calculations, bond lengths and angles, torsional potentials, adsorption and stacking energies of smaller aromatic molecules were calculated with different force fields (Compass, UFF, Dreiding and CVFF). Density functional perturbation theory calculations were used to study the intermolecular interactions between 3,3'-BTP molecules. Structural properties, adsorption energies and rotational barriers of the 3,3'-BTP surface structure and its host-guest systems with phthalocyanine (PcH(2)) or excess 3,3'-BTP as guest molecules have been addressed. In addition, STM images of oligopyridine and phthalocyanine molecules were simulated based on periodic and local density functional theory calculations.

  1. Problem-Based Learning in 9th Grade Chemistry Class: `Intermolecular Forces'

    NASA Astrophysics Data System (ADS)

    Tarhan, Leman; Ayar-Kayali, Hulya; Urek, Raziye Ozturk; Acar, Burcin

    2008-05-01

    This research study aims to examine the effectiveness of a problem-based learning (PBL) on 9th grade students’ understanding of intermolecular forces (dipole-dipole forces, London dispersion forces and hydrogen bonding). The student’s alternate conceptions about intermolecular bonding and their beliefs about PBL were also measured. Seventy-eight 9th grade students were stratified by cognitive levels and then randomly assigned to experimental (PBL, 40 students) and control (lecture-style teaching, 38 students) groups. Following a preparatory lesson where activation and remediation of existing knowledge occur, a pre-test was given, and no significant difference was found between the two groups of students ( p > .05). After the instruction was completed, a post-test and also a questionnaire related to the quality of the problem, the teacher’s role and group functioning were administered. Results from the post-test of both groups ( p < .05) and questionnaire showed that PBL is affective on students’ achievement, remedying formation of alternate conceptions and also social skills.

  2. Measuring protein isoelectric points by AFM-based force spectroscopy using trace amounts of sample

    NASA Astrophysics Data System (ADS)

    Guo, Shifeng; Zhu, Xiaoying; Jańczewski, Dominik; Lee, Serina Siew Chen; He, Tao; Teo, Serena Lay Ming; Vancso, G. Julius

    2016-09-01

    Protein charge at various pH and isoelectric point (pI) values is important in understanding protein function. However, often only trace amounts of unknown proteins are available and pI measurements cannot be obtained using conventional methods. Here, we show a method based on the atomic force microscope (AFM) to determine pI using minute quantities of proteins. The protein of interest is immobilized on AFM colloidal probes and the adhesion force of the protein is measured against a positively and a negatively charged substrate made by layer-by-layer deposition of polyelectrolytes. From the AFM force-distance curves, pI values with an estimated accuracy of ±0.25 were obtained for bovine serum albumin, myoglobin, fibrinogen and ribonuclease A over a range of 4.7-9.8. Using this method, we show that the pI of the ‘footprint’ of the temporary adhesive proteins secreted by the barnacle cyprid larvae of Amphibalanus amphitrite is in the range 9.6-9.7.

  3. A Decision Support Framework for Water Management inthe Upper Delaware River

    USGS Publications Warehouse

    Bovee, Ken D.; Waddle, Terry J.; Bartholow, John; Burris, Lucy

    2007-01-01

    Introduction The Delaware River Basin occupies an area of 12,765 square miles, in portions of south central New York, northeast Pennsylvania, northeast Delaware, and western New Jersey (fig. 1). The river begins as two streams in the Catskill Mountains, the East and West Branches. The two tributaries flow in a southwesterly direction until they meet at Hancock, N.Y. The length of the river from the mouth of Delaware Bay to the confluence at Hancock is 331 miles. Approximately 200 miles of the river between Hancock, N.Y., and Trenton, N.J., is nontidal.

  4. Personal exposure to JP-8 jet fuel vapors and exhaust at air force bases.

    PubMed

    Pleil, J D; Smith, L B; Zelnick, S D

    2000-03-01

    JP-8 jet fuel (similar to commercial/international jet A-1 fuel) is the standard military fuel for all types of vehicles, including the U.S. Air Force aircraft inventory. As such, JP-8 presents the most common chemical exposure in the Air Force, particularly for flight and ground crew personnel during preflight operations and for maintenance personnel performing routine tasks. Personal exposure at an Air Force base occurs through occupational exposure for personnel involved with fuel and aircraft handling and/or through incidental exposure, primarily through inhalation of ambient fuel vapors. Because JP-8 is less volatile than its predecessor fuel (JP-4), contact with liquid fuel on skin and clothing may result in prolonged exposure. The slowly evaporating JP-8 fuel tends to linger on exposed personnel during their interaction with their previously unexposed colleagues. To begin to assess the relative exposures, we made ambient air measurements and used recently developed methods for collecting exhaled breath in special containers. We then analyzed for certain volatile marker compounds for JP-8, as well as for some aromatic hydrocarbons (especially benzene) that are related to long-term health risks. Ambient samples were collected by using compact, battery-operated, personal whole-air samplers that have recently been developed as commercial products; breath samples were collected using our single-breath canister method that uses 1-L canisters fitted with valves and small disposable breathing tubes. We collected breath samples from various groups of Air Force personnel and found a demonstrable JP-8 exposure for all subjects, ranging from slight elevations as compared to a control cohort to > 100 [mutilpe] the control values. This work suggests that further studies should be performed on specific issues to obtain pertinent exposure data. The data can be applied to assessments of health outcomes and to recommendations for changes in the use of personal protective

  5. A High resolution dataset of reference evaporation based on the WFDEI forcing

    NASA Astrophysics Data System (ADS)

    Sperna Weiland, Frederiek; van Dijk, Albert; Lopez, Patricia; Schellekens, Jaap

    2015-04-01

    With global hydrological models being applied at ever higher spatial resolution, correspondingly high resolution global meteorological forcing data are needed. Such high resolution observations are sometimes available from satellite remote sensing, but these need to be merged with station data to remove inevitable biases and the developed datasets may in some cases suffer from remaining artefacts. Alternatively, higher resolution forcing data may be available for certain nations or regions but cannot be merged with global data sets because they are conceptually inconsistent or because of license restrictions. Importantly such data are also not available for long-term (i.e. >10 years) applications as baseline water resources assessment and global hydrological change analysis. These applications are limited to the 0.5° or coarser grid resolution of climate station analysis and model reanalysis data. Until higher resolution climate re-analysis become available, additional processing is needed to downscale the data. Simple oversampling of such coarse data can introduce large and systematic biases, particularly in areas with strong relief. By using a high resolution DEM, the main variables for determining reference evaporation can already be down-scaled and improved considerably for the complete period of the reanalysis based meteorological forcing. As part of the eartH2Observe project, we produced Penman-Monteith, Priestley-Taylor and Hargreaves reference evaporation estimates by down-scaling WFDEI climate forcing data to 10x10 km resolution using elevation data. Down-scaling was performed by applying a lapse rate on temperature, an altitude correction on air pressure and incoming radiation and by taking the effect of aspect, slope and local shading on illumination into account. We analysed the impact of the individual down-scaling methods on calculated reference evaporation and discuss the impacts on related hydrological processes. The data and tools are made

  6. Cell mechanics using atomic force microscopy-based single-cell compression.

    PubMed

    Lulevich, Valentin; Zink, Tiffany; Chen, Huan-Yuan; Liu, Fu-Tong; Liu, Gang-Yu

    2006-09-12

    We report herein the establishment of a single-cell compression method based on force measurements in atomic force microscopy (AFM). The high-resolution bright-field or confocal laser scanning microscopy guides the location of the AFM probe and then monitors the deformation of cell shape, while microsphere-modified AFM probes compress the cell and measure the force. Force and deformation profiles of living cells reveal a cubic relationship at small deformation (<30%), multiple peaks at 30-70% compression, and a rapid increase at over 80% deformation. The initial compression may be described qualitatively and quantitatively using a simple model of a nonpermeable balloon filled with incompressible fluid. Stress peaks reflect cell membrane rupture, followed by the deformation and rupture of intracellular components, beyond which the cell responses become irreversible. The Young's modulus and bending constant of living cell membranes are extracted from the balloon models, with 10-30 MPa and 17-52 kT, respectively. The initial compression of dead and fixed cells is modeled using Hertzian contact theory, assuming that the cell is a homogeneous sphere. Dead cells exhibit a cytoskeleton elasticity of 4-7.5 kPa, while fixation treatment leads to a dramatic increase in the cytoskeletal Young's modulus (150-230 kPa) due to protein cross-linking by imine bonds. These results demonstrate the high sensitivity of the single-cell compression method to the molecular-level structural changes of cells, which suggests a new generic platform for investigating cell mechanics in tissue engineering and cancer research.

  7. Application of Geophysical Techniques to Identify and Map the Benthic Habitat and Sub- bottom Sediments of Delaware Bay

    NASA Astrophysics Data System (ADS)

    Madsen, J.; Wilson, B.; Carter, D.

    2006-12-01

    The Coastal Program of the Delaware Department of Natural Resources and Environmental Control is engaged in a bottom and sub-bottom imaging project to identify and map the benthic habitat and sub-bottom sediments of the Delaware Bay. The project, now in the third of its five year implementation, integrates the use of three types of acoustical systems: RoxAnn seabed classification, chirp sub-bottom profiling, and multi-beam bathymetric mapping. Verification of the acoustic data with bottom and sub-bottom sediments is performed through the collection of grab and core samples and underwater video images. All this information is being compiled into a GIS database to enable coastal decision makers to effectively manage this estuarine resource. The RoxAnn system measures bottom hardness and roughness along a ship's track, and when correlated with analyses of ground-truth grab samples and video, can be used to classify bottom sediments. Regional maps of sediment type based on the RoxAnn classification are constructed by interpolating between track lines. This project has identified the spatial extent and relative density of oyster shell on the bay bottom, while also determining the composition of regional surrounding sediments. Sub-bottom profiles, collected using an Edgetech X-STAR chirp sonar system, are being used to map potential, and past, offshore sand borrow sites that can be/have been used for beach replenishment and to study the deposition and/or erosion of sediments and the evolution of the Delaware Estuary over the past 10,000 years. In locations along Delaware Bay where beach replenishment is necessary, the chirp data has been integrated with additional information from sediment cores to develop maps of suitable sand deposits based upon location, thickness, overburden, and grain size. The sub-bottom data has been used to map the Holocene/Pre-Holocene boundary and to constrain the paleo-environmental setting of the recent transgressive sea-level sequence in the

  8. Application of Advanced Reservoir Characterization, Simulation, and Production Optimization Strategies to Maximize Recovery in Slope, and Basin Clastic Reservoirs, West Texas (Delaware Basin)

    SciTech Connect

    Shirley P. Dutton

    1998-07-31

    The objective of this Class 3 project is to demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstones of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost effective way to recover a higher percentage of the original oil in place through strategic placement of infill wells and geologically based field development. Project objectives are divided into two main phases. The original objectives of the reservoir-characterization phase of the project were (1) to provide a detailed understanding of the architecture and heterogeneity of two representative fields of the Delaware Mountain Group, Geraldine Ford and Ford West, which produce from the Bell Canyon and Cherry Canyon Formations, respectively, (2) to chose a demonstration area in one of the fields, and (3) to simulate a CO 2 flood in the demonstration area. The Bureau's industry partner for the initial Phase 1 of the project was Conoco, Inc.. After the reservoir characterization and simulation of an area at the northern end of the Ford Geraldine unit were completed, Conoco decided not to proceed to Phase 2, installation of a CO 2 flood in the demonstration area. This decision by Conoco provides an opportunity for a more extensive field demonstration in East Ford field, with Orla Petco as the industry partner. East Ford field is immediately adjacent to the Ford Geraldine unit and produces from the same Ramsey sandstone channel. Phase 1 of the project has been expanded to include reservoir characterization of East Ford field. This additional reservoir-characterization task provides an excellent opportunity to test the transferability of the geologic model and log-interpretation methods developed during reservoir characterization of the Ford Geraldine unit to another Delaware sandstone field. The objectives of the implementation phase of the project remain the same, to (1) apply the knowledge gained from reservoir characterization and

  9. Using the PhysX engine for Physics-based Virtual Surgery with Force Feedback

    PubMed Central

    Maciel, Anderson; Halic, Tansel; Lu, Zhonghua; Nedel, Luciana P.; De, Suvranu

    2010-01-01

    Background The development of modern surgical simulators is highly challenging as they must support complex simulation environments. The demand for higher realism in such simulators has driven researchers to adopt physics-based models which are computationally very demanding. This poses a major problem since real time interactions must permit graphical updates of 30 Hz and a much higher rate of 1 kHz for force feedback (haptics). Recently several physics engines have been developed which offer multi-physics simulation capabilities including rigid and deformable bodies, cloth and fluids. While such physics engines provide unique opportunities for the development of surgical simulators, their higher latencies, compared to what is necessary for real time graphics and haptics, offer significant barriers to their use in interactive simulation environments. Methods In this work, we propose solutions to this problem and demonstrate how a multimodal surgical simulation environment may be developed based on NVIDIA’s PhysX physics library. Hence, models that are undergoing relatively low frequency updates in PhysX can exist in an environment that demands much higher frequency updates for haptics. We use a collision handling layer to interface between the physical response provided by PhysX and the haptic rendering device to provide both real time tissue response and force feedback. Results Our simulator integrates a bimanual haptic interface for force-feedback and per-pixel shaders for graphics realism in real time. To demonstrate the effectiveness of our approach, we present the simulation of the Laparoscopic Adjustable Gastric Banding (LAGB) procedure as a case study. Conclusions To develop complex and realistic surgical trainers with realistic organ geometries and tissue properties demands stable physics-based deformation methods which are not always compatible with the interaction level required for such trainers. We have shown that combining different modeling

  10. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  11. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 3 2014-07-01 2014-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  12. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 3 2012-07-01 2012-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  13. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 3 2013-07-01 2013-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  14. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 3 2011-07-01 2011-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  15. Measurement of Contractile Activity in Small Animal's Digestive Organ by Carbon Nanotube-Based Force Transducer

    NASA Astrophysics Data System (ADS)

    Hirata, Takamichi; Takeda, Naoki; Tsutsui, Chihiro; Koike, Kanako; Shimatani, Yuichi; Sakai, Takafumi; Akiya, Masahiro; Taguchi, Akira

    2011-03-01

    A carbon nanotube (CNT)-based force transducer designed to be embedded in the body of a live animal was fabricated and implanted into the stomach of a rat omit to measure contractile movement. The transducer comprised dispersed poly(ethylene glycol)-grafted multiwalled CNTs applied to a comb-like Au-electrode formed on a poly(dimethylsiloxane) sheet. The implanted rat was injected with acetylcholine to induce muscular contractions and changes in the resistance of the transducer were measured. Such changes arise owing to strain in the CNT network upon distortion. The measured resistance change was found to be proportional to the concentration of injected acetylcholine.

  16. Atomic force microscopy based nanoindentation study of onion abaxial epidermis walls in aqueous environment

    SciTech Connect

    Xi, Xiaoning; Tittmann, Bernhard; Kim, Seong H.

    2015-01-14

    An atomic force microscopy based nanoindentation method was employed to study how the structure of cellulose microfibril packing and matrix polymers affect elastic modulus of fully hydrated primary plant cell walls. The isolated, single-layered abaxial epidermis cell wall of an onion bulb was used as a test system since the cellulose microfibril packing in this cell wall is known to vary systematically from inside to outside scales and the most abundant matrix polymer, pectin, can easily be altered through simple chemical treatments such as ethylenediaminetetraacetic acid and calcium ions. Experimental results showed that the pectin network variation has significant impacts on the cell wall modulus, and not the cellulose microfibril packing.

  17. Atomic force microscopy based nanoindentation study of onion abaxial epidermis walls in aqueous environment

    NASA Astrophysics Data System (ADS)

    Xi, Xiaoning; Kim, Seong H.; Tittmann, Bernhard

    2015-01-01

    An atomic force microscopy based nanoindentation method was employed to study how the structure of cellulose microfibril packing and matrix polymers affect elastic modulus of fully hydrated primary plant cell walls. The isolated, single-layered abaxial epidermis cell wall of an onion bulb was used as a test system since the cellulose microfibril packing in this cell wall is known to vary systematically from inside to outside scales and the most abundant matrix polymer, pectin, can easily be altered through simple chemical treatments such as ethylenediaminetetraacetic acid and calcium ions. Experimental results showed that the pectin network variation has significant impacts on the cell wall modulus, and not the cellulose microfibril packing.

  18. Ab initio based force field and molecular dynamics simulations of crystalline TATB.

    PubMed

    Gee, Richard H; Roszak, Szczepan; Balasubramanian, Krishnan; Fried, Laurence E

    2004-04-15

    An all-atom force field for 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) is presented. The classical intermolecular interaction potential for TATB is based on single-point energies determined from high-level ab initio calculations of TATB dimers. The newly developed potential function is used to examine bulk crystalline TATB via molecular dynamics simulations. The isobaric thermal expansion and isothermal compression under hydrostatic pressures obtained from the molecular dynamics simulations are in good agreement with experiment. The calculated volume-temperature expansion is almost one dimensional along the c crystallographic axis, whereas under compression, all three unit cell axes participate, albeit unequally. PMID:15267608

  19. Installation restoration program records search for McClellan Air Force Base, California. Final report

    SciTech Connect

    Not Available

    1981-07-01

    The main purpose of the Records Search Program is to determine the potential, if any, for migration of toxic and hazardous materials off the McClellan Air Force Base, (AFB) installation boundaries. The potential for migration of hazardous contaminants is determined by a review of existing information, including a detailed analysis of installation records. Pertinent information includes a history of operations, the geological and hydrogeological conditions which contribute to the migration of contaminants off the installation, and ecological records for evidence of environmental effects resulting from contaminants.

  20. Physically-based modeling of drag force caused by natural woody vegetation

    NASA Astrophysics Data System (ADS)

    Järvelä, J.; Aberle, J.

    2014-12-01

    Riparian areas and floodplains are characterized by woody vegetation, which is an essential feature to be accounted for in many hydro-environmental models. For applications including flood protection, river restoration and modelling of sediment processes, there is a need to improve the reliability of flow resistance estimates. Conventional methods such as the use of lumped resistance coefficients or simplistic cylinder-based drag force equations can result in significant errors, as these methods do not adequately address the effect of foliage and reconfiguration of flexible plant parts under flow action. To tackle the problem, physically-based methods relying on objective and measurable vegetation properties are advantageous for describing complex vegetation. We have conducted flume and towing tank investigations with living and artificial plants, both in arrays and with isolated plants, providing new insight into advanced parameterization of natural vegetation. The stem, leaf and total areas of the trees confirmed to be suitable characteristic dimensions for estimating flow resistance. Consequently, we propose the use of leaf area index and leaf-to-stem-area ratio to achieve better drag force estimates. Novel remote sensing techniques including laser scanning have become available for effective collection of the required data. The benefits of the proposed parameterization have been clearly demonstrated in our newest experimental studies, but it remains to be investigated to what extent the parameter values are species-specific and how they depend on local habitat conditions. The purpose of this contribution is to summarize developments in the estimation of vegetative drag force based on physically-based approaches as the latest research results are somewhat dispersed. In particular, concerning woody vegetation we seek to discuss three issues: 1) parameterization of reconfiguration with the Vogel exponent; 2) advantage of parameterizing plants with the leaf area