Miocene-Recent sediment flux in the south-central Alaskan fore-arc basin governed by flat-slab subduction

NASA Astrophysics Data System (ADS)

Finzel, Emily S.; Enkelmann, Eva

2017-04-01

The Cook Inlet in south-central Alaska contains the early Oligocene to Recent stratigraphic record of a fore-arc basin adjacent to a shallowly subducting oceanic plateau. Our new measured stratigraphic sections and detrital zircon U-Pb geochronology and Hf isotopes from Neogene strata and modern rivers illustrate the effects of flat-slab subduction on the depositional environments, provenance, and subsidence in fore-arc sedimentary systems. During the middle Miocene, fluvial systems emerged from the eastern, western, and northern margins of the basin. The axis of maximum subsidence was near the center of the basin, suggesting equal contributions from subsidence drivers on both margins. By the late Miocene, the axis of maximum subsidence had shifted westward and fluvial systems originating on the eastern margin of the basin above the flat-slab traversed the entire width of the basin. These mud-dominated systems reflect increased sediment flux from recycling of accretionary prism strata. Fluvial systems with headwaters above the flat-slab region continued to cross the basin during Pliocene time, but a change to sandstone-dominated strata with abundant volcanogenic grains signals a reactivation of the volcanic arc. The axis of maximum basin subsidence during late Miocene to Pliocene time is parallel to the strike of the subducting slab. Our data suggest that the character and strike-orientation of the down-going slab may provide a fundamental control on the nature of depositional systems, location of dominant provenance regions, and areas of maximum subsidence in fore-arc basins.

Influence of the Amlia fracture zone on the evolution of the Aleutian Terrace forearc basin, central Aleutian subduction zone

USGS Publications Warehouse

Ryan, Holly F.; Draut, Amy E.; Keranen, Katie M.; Scholl, David W.

2012-01-01

During Pliocene to Quaternary time, the central Aleutian forearc basin evolved in response to a combination of tectonic and climatic factors. Initially, along-trench transport of sediment and accretion of a frontal prism created the accommodation space to allow forearc basin deposition. Transport of sufficient sediment to overtop the bathymetrically high Amlia fracture zone and reach the central Aleutian arc began with glaciation of continental Alaska in the Pliocene. As the obliquely subducting Amlia fracture zone swept along the central Aleutian arc, it further affected the structural evolution of the forearc basins. The subduction of the Amlia fracture zone resulted in basin inversion and loss of accommodation space east of the migrating fracture zone. Conversely, west of Amlia fracture zone, accommodation space increased arcward of a large outer-arc high that formed, in part, by a thickening of arc basement. This difference in deformation is interpreted to be the result of a variation in interplate coupling across the Amlia fracture zone that was facilitated by increasing subduction obliquity, a change in orientation of the subducting Amlia fracture zone, and late Quaternary intensification of glaciation. The change in coupling is manifested by a possible tear in the subducting slab along the Amlia fracture zone. Differences in coupling across the Amlia fracture zone have important implications for the location of maximum slip during future great earthquakes. In addition, shaking during a great earthquake could trigger large mass failures of the summit platform, as evidenced by the presence of thick mass transport deposits of primarily Quaternary age that are found in the forearc basin west of the Amlia fracture zone.

Seismic Evidence for Fluid/Gas Beneath the Mentawai Fore-Arc Basin, Central Sumatra

NASA Astrophysics Data System (ADS)

Huot, Gabriel; Singh, Satish C.

2018-02-01

Since 2004, there have been three great interplate earthquakes (Mw > 8.0) offshore Sumatra. In addition to rupturing the megathrust, these earthquakes might also have ruptured the backthrusts that bound the Andaman Islands to the Mentawai Islands toward the forearc basins. Here we apply a combination of traveltime tomography and seismic full waveform inversion to an ultralong offset seismic reflection profile from the Mentawai forearc basin, in the region of the 2007 Mw 8.4 Bengkulu earthquake. We perform a waveform inversion of far-offset data followed by a waveform inversion of near-offset data using the starting model derived from the traveltime tomography. Our results show the presence of a large, low-velocity anomaly above the backthrust. The seismic reflection image indicates that this low-velocity anomaly lies either within highly compacted sediments from the accretionary wedge or within highly deformed sediments from the forearc basin. The porosity estimation, using the effective medium theory, suggests that a small amount of gas (from 2 to 13%) or a significant amount of fluid (from 17 to 40%) could generate this low-velocity zone. The presence of fluids and the observation of bottom simulating reflector below a push-up ridge might be associated with mud diapirism. The fluids could originate locally from the dewatering of the sediments from the accretionary wedge or forearc basin. The high reflectivity of the backthrust in this region might also indicate deeper fluid origin, either from underplated sediments on the subduction interface or from the serpentinized mantle wedge.

Utility of aeromagnetic studies for mapping of potentially active faults in two forearc basins: Puget Sound, Washington, and Cook Inlet, Alaska

USGS Publications Warehouse

Saltus, R.W.; Blakely, R.J.; Haeussler, Peter J.; Wells, R.E.

2005-01-01

High-resolution aeromagnetic surveys over forearc basins can detect faults and folds in weakly magnetized sediments, thus providing geologic constraints on tectonic evolution and improved understanding of seismic hazards in convergent-margin settings. Puget Sound, Washington, and Cook Inlet, Alaska, provide two case histories. In each lowland region, shallow-source magnetic anomalies are related to active folds and/or faults. Mapping these structures is critical for understanding seismic hazards that face the urban regions of Seattle, Washington, and Anchorage, Alaska. Similarities in aeromagnetic anomaly patterns and magnetic stratigraphy between the two regions suggest that we can expect the aeromagnetic method to yield useful structural information that may contribute to earth-hazard and energy resource investigations in other forearc basins.

The Mentawai forearc sliver off Sumatra: A model for a strike-slip duplex at a regional scale

NASA Astrophysics Data System (ADS)

Berglar, Kai; Gaedicke, Christoph; Ladage, Stefan; Thöle, Hauke

2017-07-01

At the Sumatran oblique convergent margin the Mentawai Fault and Sumatran Fault zones accommodate most of the trench parallel component of strain. These faults bound the Mentawai forearc sliver that extends from the Sunda Strait to the Nicobar Islands. Based on multi-channel reflection seismic data, swath bathymetry and high resolution sub-bottom profiling we identified a set of wrench faults obliquely connecting the two major fault zones. These wrench faults separate at least four horses of a regional strike-slip duplex forming the forearc sliver. Each horse comprises an individual basin of the forearc with differing subsidence and sedimentary history. Duplex formation started in Mid/Late Miocene southwest of the Sunda Strait. Initiation of new horses propagated northwards along the Sumatran margin over 2000 km until Early Pliocene. These results directly link strike-slip tectonics to forearc evolution and may serve as a model for basin evolution in other oblique subduction settings.

Jurassic through Oligocene paleogeography of the Santa Maria basin area, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fritsche, A.E.; Yamashiro, D.A.

1991-02-01

Compilation from published reports indicates that the paleogeographic history of the Santa Maria basin area of California (west of the Sur-Nacimiento fault and north of the Santa Ynez Fault) began in the Early Jurassic in an area for to the south with the creation of a spreading-center ophiolite sequence. As the ophiolite rocks moved relatively away from the spreading center, they were covered by Lower Jurassic through Lower Cretaceous basin plain and prograding outer continental margin deposits. During this time, right-lateral movement along faults that were located to the east was transporting the area relatively northward toward its present location.more » A mild tectonic event in the middle of the Cretaceous caused formation of a parallel unconformity. Renewed subsidence in the Late Cretaceous brought deposition in trench, slope, sandy submarine fan, shelf, and ultimately in the eastern part of the area, delta and fluvial environments. During the ensuing Laramide orogeny, significant deformation raised the entire area above sea level and erosion created a major angular unconformity. During the early Tertiary, most of the Santa Maria basin area remained elevated as a forearc highland. The present-day east-west-trending area south of the Santa Ynez River fault was at the time oriented north-south. During the Eocene, this portion of the area was submerged and became a forearc basin that was located to the east of the forearc ridge that served as a source of sediment. The basin filled through the Eocene and Oligocene with submarine fan, sloe, shelf, coastal, and finally fluvial deposits. In the medial Miocene, these forearc basin rocks were rotated clockwise into their present position along the southern margin of the basin and the upper Tertiary Santa maria basin was formed.« less

Project SUMATRA: The Fore-arc Basin System of Sumatra

NASA Astrophysics Data System (ADS)

Neben, S.; Franke, D.; Gaedicke, C.; Ladage, S.; Berglar, K.; Damm, V.; Ehrhardt, A.; Heyde, I.; Schnabel, M.; Schreckenberger, B.

2006-12-01

The main scientific objective of the project SUMATRA is to determine or estimate the geological setting and evolution of the Sumatra fore-arc region. RV SONNE cruise SO189 Leg 1 was designed to investigate the architecture, sedimentary thickness, sedimentary evolution and subsidence history of the fore-arc basins Siberut, Nias and Simeulue off Sumatra. During the cruise a total of 4375km of multichannel seismic (MCS), magnetics (M) and gravity (G) data were acquired and additional 990km with M and G alone. Along two lines with a total length of 390km refraction/wide-angle seismic experiments were carried out. 41 MCS lines cover as close grids the three fore- arc basins. Five lines extend nearly orthogonal to the subduction front covering the whole subduction system from the adjacent oceanic plate, the trench and accretionary prism over the Outer Arc High to the fore-arc basins. In the Simeulue Basin it was possible to connect the seismic lines to three industry wells and to correlate the seismic horizons to the results from the wells. The Simeulue Basin is divided into a northern and southern sub- basin. The maximum thickness was determined to be 6s TWT. In the southern sub-basin carbonate build-ups (which were already identified during the SEACAUSE project), bright spots and Bottom Simulating Reflectors (BSRs) are wide spread. The narrowest basin surveyed was the Nias Basin. As the Simeulue Basin the Nias Basin is divided into two sub-basins which are separated by a structural high. Although the basin has a maximum width of only 55km the maximum sediment thickness exceeds 5s TWT. The largest investigated fore-arc basin is the Siberut Basin. It extends over 550km and has a maximum width of 140km between Siberut and Sumatra. The maximum sediment thickness in this basin is 4.8s TWT. The basin geometry is uniform along its axis. At the basins termination on the western side to the Outer Arc High the Mentawai Fault Zone could be traced. In the Siberut Basin BSRs are very wide spread and very good recognizable over the Mentawai Fault Zone. Along the Mentawai Fault and along the eastern rim of the basin the seismic data show strong indications for active venting. As offshore northern Sumatra, both landward and seaward verging folds are developed at the deformation front off Nias and Siberut. For the first time landward verging folds have now been imaged in this domain of the Sunda subduction zone. Two refraction lines were acquired parallel to the subduction front at 2.5N and 1.5S approximately 40-50km seaward of Simeulue and Siberut Island, respectively. The lines were designed to identify the segment boundaries in the subduction system as well as to detect and decipher the subducted aseismic Investigator Ridge. The gravity data set is consists now of over 38,000km (combining the GINCO, SEACAUSE I and II and the SUMATRA data). With this it was possible to compile a map of the free-air gravity from the northern tip of Sumatra (6.5N/95E) to Mid Java (8.5S/110E). Gravity modelling in parallel with refraction seismic data interpretation was carried out along two lines during the cruise. The preliminary results show that the incoming oceanic crust is at 5-6 km unusual thin, both in the south off Nias (5km) and in the north off Simeulue (6km).

Fore-arc Deformation in the Paola Basin Segment (Offshore Western Calabria) of the Tyrrhenian-Ionian Subduction System

NASA Astrophysics Data System (ADS)

Pepe, F.; Corradino, M.; Nicolich, R.; Barreca, G.; Bertotti, G.; Ferranti, L.; Monaco, C.

2017-12-01

The 3D stratigraphic architecture and Late Neogene to Recent tectonic evolution of the Paola Basin (offshore western Calabria), a segment in the fore-arc of the Tyrrhenian-Ionian subduction system, is reconstructed by using a grid of high-penetration reflection seismics. Oligocene to Messinian deposits are interpreted all along the profile. They tend to fossilize preexisting topography and reach the largest thicknesses between (fault controlled) basement highs. Plio-Quaternary deposits are found over the entire area and display variations in thickness and tectonic style. They are thicken up to 4.5 km in the depocenter of the basin, and decrease both in the east and west termination of the lines. The Paola Basin can be partitioned into two sectors with different tectonic deformation, separated by a NNW-SSE elongated area that coincides with the basin depocenter. Tectonic features associated with strike-slip restraining and releasing bends are widely spread over the western sector of the basin. Overall, they form an approximately NS-trending and geomorphically prominent ridge separating the Paola Basin from the Marsili abyssal plain. A high-angle, NNE-trending, normal fault system develops on the south-west tip of the basin, where the faults offset the Messinian horizon of ca. 500 m. Data suggest that limited vertical slip occurs along reverse faults detected at the border and inside the sedimentary infilling of the Paola Basin, reaching thickness of more than 3.8s two way travel time. The reflection sequence pattern can be interpreted as a result of the infilling of the thrust-top basin related to a prograding system, located between a growth ramp-anticline to the west and a culmination of basement-thrust sheets to the East. We propose that the Paola Basin developed near the northern edge of the Ionian slab where tearing of the lithosphere is expected. Also, the strike-slip fault system is a kinematic consequence of obliquely convergent subduction settings, where interplate strain is partitioned into arc-parallel strike-slip zones within the fore-arc, arc or back-arc region.

Possible strain partitioning structure between the Kumano fore-arc basin and the slope of the Nankai Trough accretionary prism

NASA Astrophysics Data System (ADS)

Martin, Kylara M.; Gulick, Sean P. S.; Bangs, Nathan L. B.; Moore, Gregory F.; Ashi, Juichiro; Park, Jin-Oh; Kuramoto, Shin'ichi; Taira, Asahiko

2010-05-01

A 12 km wide, 56 km long, three-dimensional (3-D) seismic volume acquired over the Nankai Trough offshore the Kii Peninsula, Japan, images the accretionary prism, fore-arc basin, and subducting Philippine Sea Plate. We have analyzed an unusual, trench-parallel depression (a "notch") along the seaward edge of the fore-arc Kumano Basin, just landward of the megasplay fault system. This bathymetric feature varies along strike, from a single, steep-walled, ˜3.5 km wide notch in the northeast to a broader, ˜5 km wide zone with several shallower linear depressions in the southwest. Below the notch we found both vertical faults and faults which dip toward the central axis of the depression. Dipping faults appear to have normal offset, consistent with the extension required to form a bathymetric low. Some of these dipping faults may join the central vertical fault(s) at depth, creating apparent flower structures. Offset on the vertical faults is difficult to determine, but the along-strike geometry of these faults makes predominantly normal or thrust motion unlikely. We conclude, therefore, that the notch feature is the bathymetric expression of a transtensional fault system. By considering only the along-strike variability of the megasplay fault, we could not explain a transform feature at the scale of the notch. Strike-slip faulting at the seaward edge of fore-arc basins is also observed in Sumatra and is there attributed to strain partitioning due to oblique convergence. The wedge and décollement strength variations which control the location of the fore-arc basins may therefore play a role in the position where an along-strike component of strain is localized. While the obliquity of convergence in the Nankai Trough is comparatively small (˜15°), we believe it generated the Kumano Basin Edge Fault Zone, which has implications for interpreting local measured stress orientations and suggests potential locations for strain-partitioning-related deformation in other subduction zones.

Shallow structure and its formation process of an active flexure in the forearc basin of the central Nankai subduction zone

NASA Astrophysics Data System (ADS)

Ashi, J.; Ikehara, K.; Omura, A.; Ojima, T.; Murayama, M.

2013-12-01

ENE-WSW trending active faults, named Enshu fault system, are developed in the forearc basins of the eastern and central Nankai subduction zone. Three parallel faults developed in the Enshu forearc basin of the eastern Nankai have right lateral slip on the basis of dextral displacement of the canyon axis. Moreover, bathymetry data and side-scan sonar imageries indicate relative uplift of the northern region and the multichannel seismic (MCS) reflection profiles show northward dipping fault planes. In the central Nankai subuduction zone, an ENE-WSW trending step is distributed at the northern part of the Kumano forearc basin and is regarded as the western extension of the Enshu fault system. Although MCS records show deformations including an anticlinal fold beneath the bathymetric step, they have less resolution to identify deformation of basin sequence just below the seafloor. In contrast, deformation seems to reach to the seafloor on a profile by SBP mounted on a mother ship. Investigation of shallow deformation structures is significant for understanding of recent tectonic activity. We carried out deep towed SBP survey by ROV NSS (Navigable Sampling System) during Hakuho-maru KH-11-9 cruise. High resolution mapping of shallow structures was successfully conducted by a chirp SBP system of EdgeTech DW-106. ROV NSS also has capability to take a long core with a pinpoint accuracy around complex topographic region. The Kumano forearc basin is topographically divided into the northern part at a water depth of 2038 m and the other major region at a depth of 2042 m by the ENE-WSW linear step. Three deep towed SBP lines intersected this topographical step and revealed the following structures. This step is composed of 100 m wide gentle slope with an inclination of about 8 degrees. An anticlinal axis is located beneath the upper edge of this slope. Sedimentary layers continue at this slope region without any abut/termination and rapidly increase their thickness toward the seaward and the landward of the slope. This suggests that the anticlinal ridge trapped sediments from the landward region, and overflowed sediments thinly covered the slope and filled the basin floor seaward of it. Because the upper 25 m sequence recognized by deep towed SBP shows no fault deformation, the step is interpreted to be caused by flexure deformation. An acoustically transparent layer is observed in this area. The thickness of this layer is 1 m at the slope and 5 m at the other regions. Four core samples indicate that the transparent layer correspond to the sequence younger than 10,000 years ago. The sequence landward of the slope indicates growth strata: thinning toward the anticlinal axis and increase of tilt angle downward. This structure is recognized from the seafloor to the strata below the transparent layer suggesting continuous deformation to the present. It is inferred that the flexure structure observed on the deep towed SBP data was formed by a landward dipping thrust fault estimated on the MCS profiles. Flower structures on the MCS data also suggest strike slip displacement and are consistent to the deformation in the Enshu forearc basin 80 km northeast of the study area.

Forearc sedimentation in Terraba Trough, Costa Rica, Central America

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuan, P.B.; Lowe, D.R.

1987-05-01

Sedimentary rocks of Terraba Trough, Costa Rica, were deposited in a forearc basin developed at an ocean-ocean convergent boundary. The basin developed in the middle to late Eocene when the Farallon plate began its subduction beneath the Caribbean plate. Shallow-water carbonates of the Brito Formation were deposited on shoals of basement blocks. These were surrounded by deeper marine areas in which volcaniclastics and carbonate debris accumulated. The Brito Formation consists of algal-foraminiferal packstone to grainstone, rudstone, and rare wackestone formed in fore-slope, carbonate buildup, and open platform environments in a warm, tropical sea. The Eocene Brito Formation is overlain bymore » rocks of the upper Oligocene Rio Claro Member of the Terraba Formation. It is composed of rhodolite and bioclastic grainstone deposited in shallow water. A combination of little subsidence, mild volcanism, and possible erosion at about 30 Ma during a global drop of sea level may be responsible for the absence of lower Oligocene rocks in the study area. After the deposition of the Rio Claro Member, the area subsided rapidly to become a trough possibly deeper than 2000 m. Sedimentation took place in deep water from sediment gravity flows. In the early to early middle Miocene, coarser sediments and thicker sand units containing coal fragments became more abundant, suggesting that the basin was gradually filled. This study indicates that the timing and degree of subsidence of the fore-arc basin and the vertical variation in lithology are closely related to the variation in convergence rate between lithospheric plates in this part of Central America and the eastern Pacific.« less

Possible Strain Partitioning Between the Kumano Forearc Basin and the Slope of the Nankai Trough Accretionary Prism

NASA Astrophysics Data System (ADS)

Martin, K. M.; Gulick, S. P.; Bangs, N. L.; Ashi, J.; Moore, G. F.; Nakamura, Y.; Tobin, H. J.

2008-12-01

A 12 km wide, 56 km long, three-dimensional (3-D) seismic volume acquired over the Nankai Trough offshore the Kii Peninsula, Japan images the Nankai accretionary prism, forearc basin and the subducting Philippine Sea Plate. We have analyzed an unusual, trench-parallel ~1200 m deep depression (a "notch") along the seaward edge of the Kumano forearc basin, just landward of the shallowest branch of the previously- mapped splay-fault system. The shape of this feature varies along strike, from a single, steep-walled, ~3.5 km wide notch in the northeast, to a broader, ~6 km wide zone with several shallower linear bathymetric lows in the southwest. We have mapped the area below the notch and found both vertical faults and faults which dip toward the central axis of the depression. Some dipping faults appear to have normal offset, consistent with the formation of a bathymetric low. Some of these dipping faults may join the central vertical fault(s) at depth, creating apparent flower structures. Offset on the vertical faults is more difficult to determine, but the dip and along-strike geometry of these faults makes predominantly normal or thrust motion unlikely. We conclude, therefore, that the notch feature is the bathymetric expression of a transtensional fault system. Possible causes for such a system in the forearc include variations in splay fault geometry and strain partitioning. By considering only the along-strike variability of the mapped splay fault, we were unable to explain a transform feature at the scale of the notch. Strike-slip faulting at the seaward edge of forearc basins is also observed in Sumatra and is there attributed to strain partitioning due to oblique convergence. The wedge and décollment strength variations which control the location of the forearc basins may therefore play a role in the position where the along-strike component of deformation is localized. While the obliquity of convergence in the Nankai trough is comparatively small (13-30 degrees), we believe it is still significant enough to account for the formation of the observed notch.

Structural Evolution of the Crotone Basin: Successive Shortening and Extension Episodes Parallel to the Calabrian Forearc (South Italy)

NASA Astrophysics Data System (ADS)

Reitz, M.; Seeber, L.

2008-12-01

At 10-12 Ma, the continental fragment of Calabria separated from Sardinia and became the crystalline core of a forearc in a NW-directed subduction system that is being consuming the Mesozoic (Neo-Tethys) oceanic lithosphere. The southeastward rollback of this arc has left in its wake the Tyrrhenian Sea by back-arc spreading. This system is confined between the continental margins of Africa and its Apulian promontory and created matching oblique-collision orogens (Sicilian Maghrebides and Apennines, respectively) along the margins. These progressive collisions shortened the arc because the gap between the margins narrowed to the SE. However, the arc is now lengthening after passing the point of closest approach of Sicily and Apulia, probably in the Quaternary. We seek evidence of this and other neotectonic episodes in the evolution of the forearc in the Crotone basin, which is situated on the accretionary E side of Calabria. A widespread unconformity correlated with the onset of rollback marks a regional foundering controlled by multidirectional extensional growth faults. These faults are consistently capped by the Messinian evaporite sequence. This sequence ends with a widespread unconformity that marks the final desiccation of the Ionian Sea ~5Ma. Mechanical changes due to drop in pore pressure and backward tilting of the accretionary wedge due to flexural unloading may be responsible for the landward emplacement of an accretionary mélange on the NE side of the Crotone Basin and the deposition of a characteristic conglomerate that locally caps the evaporites. After a well known mid-Pliocene basin-forming extensional event, we find evidence for a basin- wide contraction affecting the entire Neogene sequence up to the mid-to-late Pliocene. Vergence ranges from N to NW from east to west across the basin and is consistent with longitudinal shortening of the forearc. The shortening structures are cut or reactivated(?) by extensional faulting which we associate with Late(?) Quaternary longitudinal extension manifested by several transverse basins across the Calabrian forearc.

Basin-centered asperities in great subduction zone earthquakes: A link between slip, subsidence, and subduction erosion?

USGS Publications Warehouse

Wells, R.E.; Blakely, R.J.; Sugiyama, Y.; Scholl, D. W.; Dinterman, P.A.

2003-01-01

Published areas of high coseismic slip, or asperities, for 29 of the largest Circum-Pacific megathrust earthquakes are compared to forearc structure revealed by satellite free-air gravity, bathymetry, and seismic profiling. On average, 71% of an earthquake's seismic moment and 79% of its asperity area occur beneath the prominent gravity low outlining the deep-sea terrace; 57% of an earthquake's asperity area, on average, occurs beneath the forearc basins that lie within the deep-sea terrace. In SW Japan, slip in the 1923, 1944, 1946, and 1968 earthquakes was largely centered beneath five forearc basins whose landward edge overlies the 350??C isotherm on the plate boundary, the inferred downdip limit of the locked zone. Basin-centered coseismic slip also occurred along the Aleutian, Mexico, Peru, and Chile subduction zones but was ambiguous for the great 1964 Alaska earthquake. Beneath intrabasin structural highs, seismic slip tends to be lower, possibly due to higher temperatures and fluid pressures. Kilometers of late Cenozoic subsidence and crustal thinning above some of the source zones are indicated by seismic profiling and drilling and are thought to be caused by basal subduction erosion. The deep-sea terraces and basins may evolve not just by growth of the outer arc high but also by interseismic subsidence not recovered during earthquakes. Basin-centered asperities could indicate a link between subsidence, subduction erosion, and seismogenesis. Whatever the cause, forearc basins may be useful indicators of long-term seismic moment release. The source zone for Cascadia's 1700 A.D. earthquake contains five large, basin-centered gravity lows that may indicate potential asperities at depth. The gravity gradient marking the inferred downdip limit to large coseismic slip lies offshore, except in northwestern Washington, where the low extends landward beneath the coast. Transverse gravity highs between the basins suggest that the margin is seismically segmented and could produce a variety of large earthquakes. Published in 2003 by the American Geophysical Union.

The evolution of forearc structures along an oblique convergent margin, central Aleutian Arc

USGS Publications Warehouse

Ryan, H.F.; Scholl, D. W.

1989-01-01

Multichannel seismic reflection data were used to determine the evolutionary history of the forearc region of the central Aleutian Ridge. Since at least late Miocene time this sector of the ridge has been obliquely underthrust 30?? west of orthogonal convergence by the northwestward converging Pacific plate at a rate of 80-90 km/m.y. Our data indicate that prior to late Eocene time the forearc region was composed of rocks of the arc massif thinly mantled by slope deposits. Beginning in latest Miocene or earliest Pliocene time, a zone of outer-arc structural highs and a forearc basin began to form. Initial structures of the zone of outer-arc highs formed as the thickening wedge underran, compressively deformed, and uplifted the seaward edge of the arc massive above a landward dipping backstop thrust. Forearc basin strata ponded arcward of the elevating zone of outer-arc highs. However, most younger structures of the zone of outer-arc highs cannot be ascribed simply to the orthogonal effects of an underrunning wedge. Oblique convergence created a major right-lateral shear zone (the Hawley Ridge shear zone) that longitudinally disrupted the zone of outer-arc highs, truncating the seaward flank of the forearc basin and shearing the southern limb of Hawley Ridge, an exceptionally large antiformal outer-arc high structure. Uplift of Hawley Ridge may be related to the thickening of the arc massif by westward directed basement duplexes. Great structural complexity, including the close juxtaposition of coeval structures recording compression, extension, differential vertical movements, and strike-slip displacement, should be expected, even within areas of generally kindred tectonostratigraphic terranes. -from Authors

Mechanics of forearc basins

NASA Astrophysics Data System (ADS)

Cassola, Teodoro; Willett, Sean D.; Kopp, Heidrun

2010-05-01

In this study, the mechanics of forearc basins will be the object of a numerical investigation to understand the relationships between wedge deformation and forearc basin formation. The aim of this work is to gain an insight into the dynamics of the formation of the forearc basin, in particular the mechanism of formation of accommodation space and the preservation of basin stratigraphy. Our tool is a two-dimensional numerical model that includes the rheological properties of the rock, including effective internal friction angle, effective basal friction angle and thermally-dependent viscosity. We also simulate different sedimentation rates in the basin, to study the influence of underfilled and overfilled basin conditions on wedge deformation. The stratigraphy of the basin will also be studied, because in underfilled conditions the sediments are more likely to undergo tectonic deformation due to inner wedge deformation. We compare the numerical model with basins along the Sunda-Java Trench. This margin shows a variety of structural-settings and basin types including underfilled and overfilled basins and different wedge geometries. We interpret and document these structural styles, using depth migrated seismic sections of the Sunda Trench, obtained in three surveys, GINCO (11/98 - 01/99), MERAMEX (16/09/04 - 7/10/04) and SINDBAD (9/10/06 - 9/11/06) and made available through the IFM-GEOMAR and the Bundesanstalt für Geowissenschaften and Rohstoffe (BGR). One important aspect of these margins that we observe is the presence of a dynamic backstop, characterized by older accreted material, that, although deformed during and after accretion, later becomes a stable part of the upper plate. We argue that, following critical wedge theory, it entered into the stable field of a wedge either by steepening or weakening of the underlying detachment. As a stable wedge, this older segment of the wedge acts as a mechanical backstop for the frontal deforming wedge. This dynamic backstop moves seaward in time, in response to isostatic loading by the growing wedge, or due to seaward retreat of the slab with a consequent steepening of the base of the wedge.

India-Asia convergence: Insights from burial and exhumation of the Xigaze fore-arc basin, south Tibet

NASA Astrophysics Data System (ADS)

Li, Guangwei; Kohn, Barry; Sandiford, Mike; Xu, Zhiqin

2017-05-01

The composite fore-arc/syncollisional Xigaze basin in south Tibet preserves a key record of India-Asia collision. New apatite fission track and zircon (U-Th)/He data from an N-S transect across the preserved fore-arc basin sequence near Xigaze show a consistent northward Late Cretaceous to middle Miocene younging trend, while coexisting apatite (U-Th-Sm)/He ages are all Miocene. Corresponding detrital zircon U-Pb data are also reported for constraining the Cretaceous depositional ages of the Xigaze basin sequence in the region. Thermal history modeling indicates that the basin experienced northward propagating episodic exhumation, along with a northward migration of the depocenter and a pre-existing Cenozoic syncollisional basin sequence which had been removed. In the southern part, fore-arc exhumation commenced in the Late Cretaceous ( 89 ± 2 Ma). Following transition to a syncollisional basin in the Paleocene, sedimentation in the central and northern Xigaze basin continued until the latest Eocene ( 34 ± 4 Ma). Ongoing folding and thrusting (e.g., Great Counter Thrusts) caused by progressive plate convergence during late Oligocene-early Miocene time resulted in regional uplift and considerable basin denudation, which fed two fluvial basins along its northern and southern flanks and exposed the basement ophiolite. Subsequent incision of the Yarlung River resulted in Miocene cooling in the region. Different episodes in the exhumation history of the Xigaze basin, caused by thrusting of an accretionary wedge and ophiolitic basement, can be linked to changes in India-Asia convergence rates and the changing subduction pattern of the Indian and Neo-Tethyan slabs.

Upper Paleogene shallow-water events in the Sandino Forearc Basin, Nicaragua-Costa Rica - response to tectonic uplift

NASA Astrophysics Data System (ADS)

Andjic, Goran; Baumgartner-Mora, Claudia; Baumgartner, Peter O.

2016-04-01

The Upper Cretaceous-Neogene Sandino Forearc Basin is exposed in the southeastern Nicaraguan Isthmus and in the northwestern corner of Costa Rica. It consists of an elongated, slightly folded belt (160 km long/30 km wide). During Campanian to Oligocene, the predominantly deep-water pelagic, hemipelagic and turbiditic sequences were successively replaced by shelf siliciclastics and carbonates at different steps of the basin evolution. We have made an inventory of Tertiary shallow-water limestones in several areas of Nicaragua and northern Costa Rica. They always appear as isolated rock bodies, generally having an unconformable stratigraphic contact with the underlying detrital sequences. The presence of these short-lived carbonate shoals can be attributed to local or regional tectonic uplift in the forearc area. The best-preserved exposure of such a carbonate buildup is located on the small Isla Juanilla (0.15 km2, Junquillal Bay, NW Costa Rica). The whole island is made of reef carbonates, displaying corals in growth position, associated with coralline red algae (Juanilla Formation). Beds rich in Larger Benthic Foraminifera such as Lepidocyclina undosa -favosa group permit to date this reef as late Oligocene. A first uplift event affected the Nicaraguan Isthmus, that rose from deep-water to shelfal settings in the latest Eocene-earliest Oligocene. The upper Oligocene Juanilla Formation formed on an anticline that developed during the early Oligocene, contemporaneously with other folds observed in the offshore Sandino Forearc Basin. During the early Oligocene, a period of global sea-level fall, the folded tectonic high underwent deep erosion. During the late Oligocene, a time of overall stable eustatic sea level, tectonic uplift gave way to moderate subsidence, creating accommodation space for reef growth. A 4th or 5th order (Milankovic-type) glacio-eustatic sea level rise, could also have triggered reef growth, but its preservation implies at least moderate subsidence.

Potential seismic hazards and tectonics of the upper Cook Inlet basin, Alaska, based on analysis of Pliocene and younger deformation

USGS Publications Warehouse

Haeussler, Peter J.; Bruhn, Ronald L.; Pratt, Thomas L.

2000-01-01

The Cook Inlet basin is a northeast-trending forearc basin above the Aleutian subduction zone in southern Alaska. Folds in Cook Inlet are complex, discontinuous structures with variable shape and vergence that probably developed by right-transpressional deformation on oblique-slip faults extending downward into Mesozoic basement beneath the Tertiary basin. The most recent episode of deformation may have began as early as late Miocene time, but most of the deformation occurred after deposition of much of the Pliocene Sterling Formation. Deformation continued into Quaternary time, and many structures are probably still active. One structure, the Castle Mountain fault, has Holocene fault scarps, an adjacent anticline with flower structure, and historical seismicity. If other structures in Cook Inlet are active, blind faults coring fault-propagation folds may generate Mw 6–7+ earthquakes. Dextral transpression of Cook Inlet appears to have been driven by coupling between the North American and Pacific plates along the Alaska-Aleutian subduction zone, and by lateral escape of the forearc to the southwest, due to collision and indentation of the Yakutat terrane 300 km to the east of the basin.

Sunda-Banda Arc Transition: Marine Multichannel Seismic Profiling

NASA Astrophysics Data System (ADS)

Lueschen, E.; Mueller, C.; Kopp, H.; Djajadihardja, Y.; Ehrhardt, A.; Engels, M.; Lutz, R.; Planert, L.; Shulgin, A.; Working Group, S.

2008-12-01

After the Indian Ocean Mw 9.3 earthquake and tsunami on December 26, 2004, intensive research activities focussed on the Sunda Arc subduction system offshore Sumatra. For this area a broad database is now available interpreted in terms of plate segmentation and outer arc high evolution. In contrast, the highly active easternmost part of this subduction system, as indicated by the south of Java Mw 7.7 earthquake and tsunami on July 17, 2006, has remained almost unexplored until recently. During RV SONNE cruise SO190 from October until December 2006 almost 5000 km of marine geophysical profiles have been acquired at the eastern Sunda Arc and the transition to the Banda Arc. The SINDBAD project (Seismic and Geoacoustic Investigations along the Sunda-Banda Arc Transition) comprises 30-fold multichannel reflection seismics with a 3-km streamer, wide-angle OBH/OBS refraction seismics for deep velocity control (see poster of Shulgin et al. in this session), swath bathymetry, sediment echosounder, gravimetric and geomagnetic measurements. We present data and interpretations of several 250-380 km long, prestack depth-migrated seismic sections, perpendicular to the deformation front, based on velocity models from focussing analysis and inversion of OBH/OBS refraction data. We focus on the variability of the lower plate and the tectonic response of the overriding plate in terms of outer arc high formation and evolution, forearc basin development, accretion and erosion processes at the base of the overriding plate. The subducting Indo-Australian Plate is characterized by three segments: i) the Roo Rise with rough topography offshore eastern Java ii) the Argo Abyssal Plain with smooth oceanic crust offshore Bali, Lombok, and Sumbawa, and iii) the Scott Plateau with continental crust colliding with the Banda island arc. The forearc responds to differences in the incoming oceanic plate with the absence of a pronounced forearc basin offshore eastern Java and with development of the 4000 m deep forearc Lombok Basin offshore Bali, Lombok, and Sumbawa. The eastern termination of the Lombok Basin is formed by Sumba Island, which shows evidence for recent uplift, probably associated with the collision of the island arc with the continental Scott Plateau. The Sumba area represents the transition from subduction to collision. Our seismic profiles image the bending of the oceanic crust seaward of the trench and associated normal faulting. Landward of the trench, they image the subducting slab beneath the outer arc high, where the former bending-related normal faults appear to be reactivated as reverse faults introducing vertical displacements in the subducting slab. The accretionary prism and the outer arc high are characterized by an ocean-verging system of imbricate thrust sheets with major thrust faults connecting seafloor and detachment. Compression results in shortening and steepening of the imbricated thrust sheets building up the outer arc high. Tilted piggy-back basins and downlaps of tilted sediments in the southern Lombok forearc basin indicate ongoing uplift of the entire outer arc high, abrupt displacements, and recent tectonic activity.

Regional offshore geology of central and western Solomon Islands and Bougainville, Papua New Guinea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vedder, J.G.; Colwell, J.B.; Bruns, T.R.

The central and western Solomon Islands and the Bougainville regions are parts of a complex island-arc system that includes an intra-arc basin and remnants of both forearc and back-arc depositional wedges. These features formed in response to episodic Cenozoic tectonism along the convergent boundary between the Pacific and Australia-India plates. Presumed early Tertiary southwest-directed subduction of the Pacific plate and associated arc magmatism were curtailed by impingement of the leading edge of the Ontong Java Plateau. Aprons of back-arc and forearc sediment were derived from highstanding parts of the arc during the late Oligocene and early Miocene. Late Tertiary arc-polaritymore » reversal and northeastward-directed subduction of the Woodlark spreading system caused a renewal of island-arc magmatism that completed the construction of the Central Solomons Trough as an enclosed intra-arc basin. Interpretations of multichannel profiles from 1982 and 1984 CCOP/SOPAC Tripartite Cruises of the research vessel R/V S.P. Lee indicate that the Central Solomons Trough is a composite intra-arc basin containing as much as 5.5 km of late Oligocene(.) and younger sedimentary rocks. As many as five lenticular seismic-stratigraphic units can be identified on the basis of unconformities and abrupt velocity changes. Late Miocene and younger folds and faults deform the northeast and southwest flanks of the basin. Profiles across the Kilinailau Trench show Ontong Java Plateau rocks covered by 2-4 km of trench sediment. The inner trench wall consists of folded, upfaulted, and rotated blocks of trench and forearc strata. The deep-water basin northwest of Bougainville is a southeastward extension of the New Ireland forearc basin, the southern margin of which is formed by a subsided part of the early Cenozoic arc. There, Oligocene(.) and younger basin strata, as much as 7 km thick, are deformed by pre-Pliocene faults and folds.« less

Slab Roll-Back and Trench Retreat As Controlling Factor for Island-Arc Related Basin Evolution: A Case Study from Southern Central America

NASA Astrophysics Data System (ADS)

Brandes, C.; Winsemann, J.

2014-12-01

Slab roll-back and trench retreat are important factors for basin subsidence, magma generation and volcanism in arc-trench systems. From the sedimentary and tectonic record of the Central American island-arc it is evident that repeated slab roll-back and trench retreats occurred since the Late Cretaceous. These trench retreats were most probably related to the subduction of oceanic plateaus and seamounts. Evidence for trench retreats is given by pulses of uplift in the outer-arc area, followed by subsidence in both the fore-arc and back-arc basins. The first slab roll-back probably occurred during the Early Paleocene indicated by the collapse of carbonate platforms, and the re-deposition of large carbonate blocks into deep-water turbidites. At this time the island-arc was transformed from an incipient non-extensional stage into an extensional stage. A new pulse of uplift or decreased subsidence, respectively during the Late Eocene is attributed to subduction of rough crust, a subsequent slab detachment and the establishment of a new subduction zone further westward. Strong uplift especially affected the outer arc of the North Costa Rican arc segment. In the Sandino Fore-arc basin very coarse-grained deep-water channel-levee complexes were deposited. These deposits contain large well-rounded andesitic boulders and are rich in reworked shallow-water carbonates pointing to uplift of the inner fore-arc. Evidence for the subsequent trench retreat is given by an increased subsidence during the early Oligocene in the Sandino Fore-arc Basin and the collapse of the Barra Honda platform in North Costa Rica. Another trench retreat might have occurred in Miocene times. A phase of higher subsidence from 18 to 13 Ma is documented in the geohistory curve of the North Limon Back-arc Basin. After a short pulse of uplift the subsidence increased to approx. 300 m/myr.

The Sunda-Banda Arc Transition: New Insights from Marine Multichannel Seismic Data

NASA Astrophysics Data System (ADS)

Mueller, C.; Kopp, H.; Djajadihardja, Y.; Engels, M.; Flueh, E.; Gaedicke, C.; Lueschen, E.; Lutz, R.; Planert, L.; Shulgin, A.; Soemantri, D. D.

2007-12-01

After the Indian Ocean Mw 9.3 earthquake and tsunami on December 26, 2004, intensive research activities focussed on the Sunda Arc subduction system offshore Sumatra. For this area a broad database is now available interpreted in terms of plate segmentation and outer arc high evolution. In contrast, the highly active easternmost part of this subduction system, as indicated by the south of Java Mw 7.7 earthquake and tsunami on July 17, 2006, has remained almost unexplored until recently. During RV SONNE cruise SO190 from October until December 2006 almost 5000 km of marine geophysical profiles have been acquired at the eastern Sunda Arc and the transition to the Banda Arc. The SINDBAD project (Seismic and Geoacoustic Investigations along the Sunda-Banda Arc Transition) comprises 30-fold multichannel reflection seismics with a 3-km streamer, wide-angle OBH/OBS refraction seismics for deep velocity control (see poster of Planert et al. in this session), swath bathymetry, sediment echosounder, gravimetric and geomagnetic measurements. We present data and interpretations of several 250-380 km long, prestack depth-migrated seismic sections, perpendicular to the deformation front, based on velocity models from focussing analysis and inversion of OBH/OBS refraction data. We focus on the variability of the lower plate and the tectonic response of the overriding plate in terms of outer arc high formation and evolution, forearc basin development, accretion and erosion processes at the base of the overriding plate. The subducting Indo-Australian Plate is characterized by three segments: i) the Roo Rise with rough topography offshore eastern Java ii) the Argo Abyssal Plain with smooth oceanic crust offshore Bali, Lombok, and Sumbawa, and iii) the Scott Plateau with continental crust colliding with the Banda island arc. The forearc responds to differences in the incoming oceanic plate with the absence of a pronounced forearc basin offshore eastern Java and with development of the 4000 m deep forearc Lombok Basin offshore Bali, Lombok, and Sumbawa. The eastern termination of the Lombok Basin is formed by Sumba Island, which shows evidence for recent uplift, probably associated with the collision of the island arc with the continental Scott Plateau. The Sumba area represents the transition from subduction to collision. Our seismic profiles image the bending of the oceanic crust seaward of the trench and associated normal faulting. Landward of the trench, they image the subducting slab beneath the outer arc high, where the former bending-related normal faults appear to be reactivated as reverse faults introducing vertical displacements in the subducting slab. The accretionary prism and the outer arc high are characterized by an ocean-verging system of imbricate thrust sheets with major thrust faults connecting seafloor and detachment. Compression results in shortening and steepening of the imbricated thrust sheets building up the outer arc high. Tilted piggy-back basins and downlaps of tilted sediments in the southern Lombok forearc basin indicate ongoing uplift of the entire outer arc high, abrupt displacements, and recent tectonic activity.

The forearc crustal evolution of Izu-Bonin (Ogasawara) region obtained by seismic reflection and refraction surveys

NASA Astrophysics Data System (ADS)

Yamashita, M.; Kodaira, S.; Takahashi, N.; Tatsumi, Y.; Kaneda, Y.

2009-12-01

The Izu-Bonin (Ogasawara)-Mariana (IBM) arc is known to the typical oceanic island arc, and it is the most suitable area to understand the growth process of island arc. By previous seismic survey and deep sea drilling, convex basements are distributed along North-South direction in present forearc region. The convex basements are reported to be formed during Oligocene and Eocene (Taylor, 1992). In IBM forearc region, the middle crust with 6 km/s is recognized by seismic survey using OBSs. In IBM region, four IODP drilling sites are proposed in order to understand comprehensive growth process of arc and continental crust evolution. Two of them are located in forearc region. Japan Agency for Marine-Earth Science and Technology (JAMSTEC) carried out multi-channel seismic reflection survey using 7,800/12,000 cu.in. air gun and 5-6 km streamer with 444/204 ch hydrophones in the IBM region since 2004. We investigate the crustal structure beneath the Izu-Bonin forearc region for contribution of IBM drilling site along five long survey lines, which are across from present volcanic front to forearc basin. Seismic refraction survey is also conducted across forearc region using 84 OBSs every 1 km interval. Shallow crustal structure can be classified four units including basement which compared between previous drilling results and obtained seismic profiles. In IBM forearc region, thick sedimentary basin distribute from east side of volcanic front. Two convex basement peaks are indicated in across profile of forearc region. These peaks are estimated the top of paleoarc (Oligocene and Eocene) by previous ODP drilling. The half graben structure with major displacement is identified from west side of present volcanic front to the top of Oligocene arc. On the other hand, there is no displacement of sediments between the Oligocene arc and Eocene arc. This result shows the same origin of basement between the present volcanic front and Oligocene arc. There is long time difference of tectonic activity of sediments between the west and east side of Oligocene paleoarc. We would present the crustal condition before rifting between present volcanic front and Oligocene paleoarc by comparison of reflection and velocity structure.

Insights on the structural control of a Neogene forearc basin in Northern Chile: A geophysical approach

NASA Astrophysics Data System (ADS)

García-Pérez, Tiaren; Marquardt, Carlos; Yáñez, Gonzalo; Cembrano, José; Gomila, Rodrigo; Santibañez, Isabel; Maringue, José

2018-06-01

The comprehensive study of intramountain basins located in the Coastal Cordillera of the continental emergent Andean forearc in Northern Chile, enables the better understanding of the nature and evolution of the upper crustal deformation during the Neogene and Quaternary. A case study is the extensive extensional half-graben Alto Hospicio basin. The basin is cut by the Coastal Cliff, which exposes the deformed Neogene basin fill. Also exposed are several structural systems, some of which affect Quaternary surfaces. The results of the integrated geophysical surveys (Electromagnetic Transient and Gravity) allow us to fully constrain the geometry of the Alto Hospicio basin and the lithological relationship between the subsurface geological units. The structural geology analysis assesses the deformation regimes affecting the faults present in the basin and surrounding area. Altogether evidence a change in the deformation regime from an EW extensional deformation during the Miocene-Pliocene to a NS compression in the Quaternary as is presented in this study. We suggest this deformation change is related to a small change in the convergence vector orientation during the Pliocene.

Origin and dynamics of depositionary subduction margins

USGS Publications Warehouse

Vannucchi, Paola; Morgan, Jason P.; Silver, Eli; Kluesner, Jared W.

2016-01-01

Here we propose a new framework for forearc evolution that focuses on the potential feedbacks between subduction tectonics, sedimentation, and geomorphology that take place during an extreme event of subduction erosion. These feedbacks can lead to the creation of a “depositionary forearc,” a forearc structure that extends the traditional division of forearcs into accretionary or erosive subduction margins by demonstrating a mode of rapid basin accretion during an erosive event at a subduction margin. A depositionary mode of forearc evolution occurs when terrigenous sediments are deposited directly on the forearc while it is being removed from below by subduction erosion. In the most extreme case, an entire forearc can be removed by a single subduction erosion event followed by depositionary replacement without involving transfer of sediments from the incoming plate. We need to further recognize that subduction forearcs are often shaped by interactions between slow, long-term processes, and sudden extreme events reflecting the sudden influences of large-scale morphological variations in the incoming plate. Both types of processes contribute to the large-scale architecture of the forearc, with extreme events associated with a replacive depositionary mode that rapidly creates sections of a typical forearc margin. The persistent upward diversion of the megathrust is likely to affect its geometry, frictional nature, and hydrogeology. Therefore, the stresses along the fault and individual earthquake rupture characteristics are also expected to be more variable in these erosive systems than in systems with long-lived megathrust surfaces.

Basins in ARC-continental collisions

USGS Publications Warehouse

Draut, Amy E.; Clift, Peter D.; Busby, Cathy; Azor, Antonio

2012-01-01

Arc-continent collisions occur commonly in the plate-tectonic cycle and result in rapidly formed and rapidly collapsing orogens, often spanning just 5-15 My. Growth of continental masses through arc-continent collision is widely thought to be a major process governing the structural and geochemical evolution of the continental crust over geologic time. Collisions of intra-oceanic arcs with passive continental margins (a situation in which the arc, on the upper plate, faces the continent) involve a substantially different geometry than collisions of intra-oceanic arcs with active continental margins (a situation requiring more than one convergence zone and in which the arc, on the lower plate, backs into the continent), with variable preservation potential for basins in each case. Substantial differences also occur between trench and forearc evolution in tectonically erosive versus tectonically accreting margins, both before and after collision. We examine the evolution of trenches, trench-slope basins, forearc basins, intra-arc basins, and backarc basins during arc-continent collision. The preservation potential of trench-slope basins is low; in collision they are rapidly uplifted and eroded, and at erosive margins they are progressively destroyed by subduction erosion. Post-collisional preservation of trench sediment and trench-slope basins is biased toward margins that were tectonically accreting for a substantial length of time before collision. Forearc basins in erosive margins are usually floored by strong lithosphere and may survive collision with a passive margin, sometimes continuing sedimentation throughout collision and orogeny. The low flexural rigidity of intra-arc basins makes them deep and, if preserved, potentially long records of arc and collisional tectonism. Backarc basins, in contrast, are typically subducted and their sediment either lost or preserved only as fragments in melange sequences. A substantial proportion of the sediment derived from collisional orogenesis ends up in the foreland basin that forms as a result of collision, and may be preserved largely undeformed. Compared to continent-continent collisional foreland basins, arc-continent collisional foreland basins are short-lived and may undergo partial inversion after collision as a new, active continental margin forms outboard of the collision zone and the orogen whose load forms the basin collapses in extension.

Apparent overconsolidation of mudstones in the Kumano Basin of southwest Japan: Implications for fluid pressure and fluid flow within a forearc setting

NASA Astrophysics Data System (ADS)

Guo, Junhua; Underwood, Michael B.; Likos, William J.; Saffer, Demian M.

2013-04-01

The Kumano Basin is located in the Nankai Trough subduction zone of southwest Japan. During the past 1.6 million years, approximately 800 meters of sandy turbidites and hemipelagic mud were deposited near the distal edge of the forearc basin, at Site C0002 of the Integrated Ocean Drilling Program. Constant-rate-of-strain consolidation tests yield estimates of in situ permeability that range from 2.6 × 10-17 m2 to 2.5 × 10-18 m2; overconsolidation ratios range from 1.7 to 2.6, and values of the compression index range from 0.39 to 0.78. Several processes contributed to the apparent overconsolidation. Strata dip toward land, and pore fluids probably migrate up-dip and vent along a bathymetric notch near the seaward edge of the basin. Efficient lateral drainage through sandy turbidites has kept pore pressures within interbeds of mudstone at (or close to) hydrostatic. In addition, alteration of dispersed volcanic glass, precipitation of authigenic clay minerals, and collapse of random grain fabric has probably strengthened the bonding among grains. Cementation is particularly likely within the lower basin (unit III), where values of porosity remain anomalously high. If fluid overpressures (and underconsolidation) exist anywhere within the basin, the most likely loci are where sandy turbidites terminate against impermeable mudstones along landward-dipping on-lap surfaces. Those types of on-lap geometries, in addition to structural closures, might provide promising targets for oil/gas accumulation in other forearc basins, particularly where petroleum source rocks have been buried to the optimal depths of catagenesis.

The Relationships of Upper Plate Ridge-Trench-Trench and Ridge-Trench-Transform Triple Junction Evolution to Arc Lengthening, Subduction Zone initiation and Ophiolitic Forearc Obduction

NASA Astrophysics Data System (ADS)

Casey, J.; Dewey, J. F.

2013-12-01

The principal enigma of large obducted ophiolite slabs is that they clearly must have been generated by some form of organized sea-floor spreading/plate-accretion, such as may be envisioned for the oceanic ridges, yet the volcanics commonly have arc affinity (Miyashiro) with boninites (high-temperature/low-pressure, high Mg and Si andesites), which are suggestive of a forearc origin. PT conditions under which boninites and metamorphic soles form and observations of modern forearc systems lead us to the conclusion that ophiolite formation is associated with overriding plate spreading centers that intersect the trench to form ridge-trench-trench of ridge-trench-tranform triple junctions. The spreading centers extend and lengthen the forearc parallel to the trench and by definition are in supra-subduction zone (SSZ) settings. Many ophiolites likewise have complexly-deformed associated mafic-ultramafic assemblages that suggest fracture zone/transform along their frontal edges, which in turn has led to models involving the nucleation of subduction zones on fracture zones or transpressional transforms. Hitherto, arc-related sea-floor-spreading has been considered to be either pre-arc (fore-arc boninites) or post-arc (classic Karig-style back arc basins that trench-parallel split arcs). Syn-arc boninites and forearc oceanic spreading centers that involve a stable ridge/trench/trench triple or a ridge-trench-transform triple junction, the ridge being between the two upper plates, are consistent with large slab ophiolite formation in an obduction-ready settting. The direction of subduction must be oblique with a different sense in the two subduction zones and the oblique subduction cannot be partitioned into trench orthogonal and parallel strike-slip components. As the ridge spreads, new oceanic lithosphere is created within the forearc, the arc and fore-arc lengthen significantly, and a syn-arc ophiolite forearc complex is generated by this mechanism. The ophiolite ages along arc-strike; a distinctive diachronous MORB-like to boninitic to arc volcanic stratigraphy develops vertically in the forearc and eruption centers progressively migrate from the forearc back to the main arc massif with time. Dikes in the ophiolite are commonly highly oblique to the trench (as are back-arc magnetic anomalies in modern environments). Boninites and high-mg andesites are generated in the fore-arc under the aqueous, low pressure/high temperature, regime at the ridge above the instantaneously developed subducting and dehydrating slab. We review both modern subduction environments and ancient obducted ophiolite analogues that illustrate this tectonic model for subduction initiation and the creation and rapid divergent-convergent plate tectonic transitions to ophiolitic forearcs.

Structural and Depositional Evolution of the Stevenson Basin, a Gulf of Alaska Forearc Basin: Insights from Legacy Seismic and Borehole Data

NASA Astrophysics Data System (ADS)

Bhattacharya, R.; Liberty, L. M.; Almeida, R. V.; Hubbard, J.

2016-12-01

We explore the structural and depositional evolution of the Stevenson Basin, Gulf of Alaska from a dense network of 2-D marine seismic profiles that span the Gulf of Alaska continental margin. The grid of 71 seismic profiles was acquired as part of a 1975 Mineral Management Services (MMS) exploration project to assess basin architecture along the Alaska continental shelf. We obtained unmigrated and stacked seismic profiles in TIFF format. We converted the data to SEGY format and migrated each profile. Within the Stevenson Basin, we identify key seismic horizons, including the regional Eocene-Miocene unconformity, that provide insights into its depositional and structural history. Using these observations combined with stacking velocities, sonic logs from wells, and refraction velocities from the Edge profile of Ye et al. (1997), we develop a local 3D velocity model that we use to depth-convert the seismic reflection profiles. By using ties to >2.5 km deep exploration wells, we note the Stevenson Basin is one of many Eocene and younger depocenters that span the forearc between Kodiak and Prince William Sound. Well logs and seismic data suggest basal strata consist of Eocene sediments than are unconformably overlain by Neogene and younger strata. Faults that breach the sea floor suggest active deformation within and at the bounds of this basin, including on new faults that do not follow any pre-existing structural trends. This assessment is consistent with slip models that place tsunamigenic faults that ruptured during the 1964 Great Alaska earthquake in the vicinity of the basin. The catalog of faults, their slip history and the depositional evolution of the Stevenson Basin, all suggest that the basin evolution may be controlled by heterogeneities along the incoming plate.

Gravity and Magnetic Anomaly Interpretations and 2.5D Cross-Section Models over the Border Ranges Fault System and Aleutian Subduction Zone, Alaska

NASA Astrophysics Data System (ADS)

Mankhemthong, N.; Doser, D. I.; Baker, M. R.; Kaip, G.; Jones, S.; Eslick, B. E.; Budhathoki, P.

2011-12-01

Quaternary glacial covers and lack of dense geophysical data on the Kenai Peninsula cause a location and geometry of the Border Ranges fault system (BRFS) within a recent forearc-accretionary boundary of Aleutian subduction zone in southern Alaska are unclear. Using new ~1,300 gravity collections within the Anchorage and Kenai Peninsula regions complied with prior 1997 gravity and aeromagnetic data help us better imaging these fault and the subduction structures. Cook Inlet forearc basin is corresponded by deep gravity anomaly lows; basin boundaries are characterized by a strong gravity gradient, where are considered to be traces of Border Ranges fault system on the east and Castle Mountain and Bruin Bay fault system on the west and northwest of the forearc basin respectively. Gravity anomaly highs over accreted rocks generally increase southeastward to the Aleutian trench, but show a gravity depression over the Kenai Mountains region. The lineament between gravity high and low in the same terrenes over the Kenai Peninsula is may be another evidence to determine the Southern Edge of the Yakutat Microplate (SEY) as inferred by Eberhart-Phillips et al. (2006). Our 2.5-D models illustrate the main fault of the BRFS dips steeply toward the west with a downslip displacement. Gravity and Magnetic anomaly highs, on the east of the BRFS, probably present a slice of the ultramafic complex emplaced by faults along the boundary of the forearc basin and accretionary wedge terranes. Another magnetic high beneath the basin in the southern forearc basin support a serpentiznied body inferred by Saltus et al. (2001), with a decreasing size toward the north. Regional density-gravity models show the Pacific subducting slab beneath the foreacre-arc teranes with a gentle and flatted dip where the subducting plate is located in north of SEY and dips more steeply where it is located on the south of SEY. The gravity depression over the accreted terrene can be explained by a density low slab beneath, which does not exist on the south. Results of 2.5-D density models will be used to guide the building of 3-D inversion models. Plausible interpretations of a modeling structure by implementing a 3-D model will be compared, and the most reasonable model will be used for structures representative of the BRFS including the subduction tectonics in southern Alaska.

Travel Time Tomographic Imaging of Shallow Fore-arc Basin Structure at the Cascadia Subduction Zone Offshore Washington and Oregon

NASA Astrophysics Data System (ADS)

Azarm, R.; Carton, H. D.; Carbotte, S. M.; Han, S.; Canales, J. P.; Nedimovic, M. R.

2016-12-01

We conduct a P-wave tomography study of shallow fore-arc basin structure at the Cascadia subduction zone using first-arrival travel times from two multi-channel seismic (MCS) profiles acquired with an 8-km long streamer in the frame of the 2012 Juan de Fuca Ridge to Trench program. The first profile extends offshore Gray's Harbor in Washington and the second extends offshore Oregon at the latitude of Hydrate ridge, with the fore-arc basin imaged below ˜60 and ˜70-km long shallow water (< 500 m) portions of these profiles, respectively. We use the travel time tomography method of VanAvendonk et al. [2004], which is based on the shortest path method for ray tracing, and iterative inversions driven by gradual reduction of the chi-square misfit (root mean square value of the difference between predicted and observed travel times normalized by pick uncertainty). We construct our starting model by hanging from the seafloor a 1D velocity profile based on interval velocities derived from semblance analysis of MCS data. Resolvability of the final model is assessed using checkerboard pattern tests with different anomaly sizes. We then compare our tomographically-derived velocity models to coincident seismic reflection images post-stack time migrated and converted to depth using our results. On the Washington shelf, where the fore-arc basin is segmented into three sub-basins, ray coverage mostly extends to ˜1.2-1.5 km below seafloor. Velocities in the shallowmost sediments show, at the large scale, a gradual decrease towards the shelf edge (from 2.1 to 1.8 km/s). At depth, regions devoid of clear reflections such as an ˜5 km large anticline core are associated with lower velocities than that obtained within mildly deformed sedimentary layers on either side (2.3 vs 2.7 km/s, measured at 1.2 km depth), suggesting the presence of localized fluid-rich regions within the basin. Analysis of the Oregon line is ongoing and results will be presented at the meeting.

In situ stress conditions at IODP Site C0002 reflecting the tectonic evolution of the sedimentary system near the seaward edge of the Kumano basin, offshore from SW Japan

NASA Astrophysics Data System (ADS)

Song, Insun; Chang, Chandong

2017-05-01

This paper presents a complete set of in situ stress calculations for depths of 200-1400 meters below seafloor at Integrated Ocean Drilling Program (IODP) Site C0002, near the seaward margin of the Kumano fore-arc basin, offshore from southwest Japan. The vertical stress component was obtained by integrating bulk density calculations from moisture and density logging data, and the two horizontal components were stochastically optimized by minimizing misfits between a probabilistic model and measured breakout widths for every 30 m vertical segment of the wellbore. Our stochastic optimization process reveals that the in situ stress regime is decoupled across an unconformity between an accretionary complex and the overlying Kumano fore-arc basin. The stress condition above the unconformity is close to the critical condition for normal faulting, while below the unconformity the geologic system is stable in a normal to strike-slip fault stress regime. The critical state of stress demonstrates that the tectonic evolution of the sedimentary system has been achieved mainly by the regionally continuous action of a major out-of-sequence thrust fault during sedimentation in the fore-arc basin. The stable stress condition in the accretionary prism is interpreted to have resulted from mechanical decoupling by the accommodation of large displacement along the megasplay fault.

Multichannel Seismic Images of Cascadia Forearc Structure at the Oregon Margin

NASA Astrophysics Data System (ADS)

Han, S.; Carbotte, S. M.; Carton, H. D.; Canales, J.; Nedimovic, M. R.

2013-12-01

We present new Multichannel Seismic (MCS) images of the Cascadia forearc and downgoing Juan de Fuca plate offshore Oregon. The data were collected during the Cascadia Ridge-to-Trench experiment conducted in June-July 2012 aboard the R/V Langseth. 2D processing including geometry definition, filtering and editing, deconvolution, amplitude correction, velocity analysis, CMP stacking, and post-stack time migration, has been conducted. The new images confirm some previous observations on the location of the plate boundary and structure of the forearc and also reveal new features of the Oregon margin. West of the deformation front, the Juan de Fuca Plate has a dip of ~1.5o and sediment thickness is > 3 km. A bright Moho reflection and reflections from faults cutting through the crust are imaged. The subducting oceanic crust can be traced continuously landward at least to 15 km from the deformation front. One major forearc basin and a smaller basin 10 km from its west end are imaged. Sediments in both basins are folded with wavelengths of 4-6 km and several faults are identified in the larger basin. Beneath the major basin, a low-frequency reflection is imaged at 3.7 s TWTT similar to that imaged by Trehu et al (1995) and interpreted as originating from the top of Siletz terrane. About 70-80 km from the deformation front, a shallowly dipping reflection is imaged at 7.3 s, which likely corresponds to the top of the downgoing plate. Based on existing velocity models for the margin, the location of this reflection is approximately coincident with the July 2004 earthquake cluster interpreted to have occurred at the plate boundary. This bright reflection is presumably similar in origin to the 'bright spot' imaged from two prior multichannel and wide-angle seismic reflection surveys lines located 40 km and 60 km north of our line. The brightness of the reflection may reflect high pore fluid pressure at the plate interface. Just 4 km west of this presumed top-of-subducting plate reflection, there is another deep reflection at around 7 s dipping landward. This reflection may correspond to the base of the Siletz terrane, which would imply a subduction channel beneath the Siletz terrane. Alternatively, this reflection may be related to a subducted seamount identified from magnetic anomalies by Trehu et al (2012). In addition, we image several small diffractors at 5-7 s TWTT to the west, which are likely related to heterogeneities within the accretionary complex. MCS images of the Cascadia forearc at the Oregon margin illustrating these features will be presented and will be compared with the forearc structure imaged along our Washington MCS line from the same survey.

Contrasting sedimentary processes along a convergent margin: the Lesser Antilles arc system

NASA Astrophysics Data System (ADS)

Picard, Michel; Schneider, Jean-Luc; Boudon, Georges

2006-12-01

Sedimentation processes occurring in an active convergent setting are well illustrated in the Lesser Antilles island arc. The margin is related to westward subduction of the North and/or the South America plates beneath the Caribbean plate. From east to west, the arc can be subdivided into several tectono-sedimentary depositional domains: the accretionary prism, the fore-arc basin, the arc platform and inter-arc basin, and the Grenada back-arc basin. The Grenada back-arc basin, the fore-arc basin (Tobago Trough) and the accretionary prism on the east side of the volcanic arc constitute traps for particles derived from the arc platform and the South American continent. The arc is volcanically active, and provides large volumes of volcaniclastic sediments which accumulate mainly in the Grenada basin by volcaniclastic gravity flows (volcanic debris avalanches, debris flows, turbiditic flows) and minor amounts by fallout. By contrast, the eastern side of the margin is fed by ash fallout and minor volcaniclastic turbidites. In this area, the dominant component of the sediments is pelagic in origin, or derived from South America (siliciclastic turbidites). Insular shelves are the locations of carbonate sedimentation, such as large platforms which develop in the Limestone Caribbees in the northern part of the margin. Reworking of carbonate material by turbidity currents also delivers lesser amounts to eastern basins of the margin. This contrasting sedimentation on both sides of the arc platform along the margin is controlled by several interacting factors including basin morphology, volcanic productivity, wind and deep-sea current patterns, and sea-level changes. Basin morphology appears to be the most dominant factor. The western slopes of the arc platform are steeper than the eastern ones, thus favouring gravity flow processes.

The Portland Basin: A (big) river runs through it

USGS Publications Warehouse

Evarts, Russell C.; O'Connor, Jim E.; Wells, Ray E.; Madin, Ian P.

2009-01-01

Metropolitan Portland, Oregon, USA, lies within a small Neogene to Holocene basin in the forearc of the Cascadia subduction system. Although the basin owes its existence and structural development to its convergent-margin tectonic setting, the stratigraphic architecture of basin-fill deposits chiefly reflects its physiographic position along the lower reaches of the continental-scale Columbia River system. As a result of this globally unique setting, the basin preserves a complex record of aggradation and incision in response to distant as well as local tectonic, volcanic, and climatic events. Voluminous flood basalts, continental and locally derived sediment and volcanic debris, and catastrophic flood deposits all accumulated in an area influenced by contemporaneous tectonic deformation and variations in regional and local base level.

In the Footsteps of Charles Darwin: Patterns of Coastal Subsidence and Uplift Associated with Seamount Subduction, Basal Fore-arc Erosion and Seamount Accretion in Latin America

NASA Astrophysics Data System (ADS)

Fisher, D. M.; Kirby, S. H.; David, S. W.

2004-12-01

In Geological Observations on South America (1846), Charles Darwin described beds of late Cenozoic marine seashells that were uplifted to elevations as much as several hundred meters above some localities on the western coastline of South America and implied that the whole coast was uplifting at geologic time scales. We know now that such evidence is generally restricted to coastal embayments above fore-arc basins where offshore seamounts are colliding with the South American fore arc (e.g., the Juan Fernandez seamount chain, Valpariso Basin and Valpariso Bay). We suggest that the phenomena of basal fore-arc erosion and basin formation and coastal uplift are closely related to effects of seamount subduction. Marine multibeam sonar images and multichannel seismic reflection surveys by others demonstrate that seamounts, although locally cut by normal faults in the outer-rise/near-trench region, initally subduct intact and the primary interaction with the toe of the fore arc is plowing, with material eroded from the fore arc that accumulates above and on the margins of the seamount. Submarine landslides above such regions over-steepened by plowing can lead to coastal embayments far upslope of the plowing. Such plowing interaction can therefore lead to the formation of large forearc basins and coastal embayments such as those at Valpariso, Chile, or narrow corridors of subsidence in the wake of subducting seamounts in Costa Rica. It is also known that the transition between interplate thrust seismicity, representing mechanical coupling between the plates, and aseismic slip occurs at depths of typically 30-60 km and often geographically near coastlines that mark the boundary between outer fore-arc subsidence and inner fore-arc uplift. We suggest that decoupling can occur at the base of seamounts (i.e., the originally sedimented seafloor on which the seamount lavas are laid down) and that such seamounts can be accreted to the fore arc above and lead to coastal uplift. Such basal decoupling is known to occur under active volcanic islands in the open ocean in connection with rifting and gravitational spreading, such as beneath the island of Hawaii. The spatial and temporal patterns of coastal uplift and subsidence on active margins can therefore record the local history of seamount subduction. This conceptual model explains the spatial patterns of offshore subsidence and coastal uplift in Chile and Costa Rica and also has implications for patterns of seismicity along the interplate thrust boundary.

Link between the northward extension of Great Sumatra Fault and continental rifting in the Andaman Sea: new results from seismic reflection studies

NASA Astrophysics Data System (ADS)

Singh, S. C.; Moeremans, R. E.; McArdle, J.; Johansen, K.

2012-12-01

The Great Sumatra Fault (GSF) traverses the main land Sumatra from Sunda Strait in the southeast to Banda Aceh in the northwest for about 1900 km, and defines the present day plate boundary between the Sunda Plate in the north and Burmese Sliver Plate in the south. It is formed due to the oblique subduction of the Indo-Australian Plate beneath the Sunda Plate. It has been well studied on land but is poorly studied north of Banda Aceh in the Andaman Sea. Its study is further complicated by the presence of volcanic arc in its vicinity and its interaction with the West Andaman Fault (WAF) further north. Here we present deep seismic reflection images along the northward extension of the GSF over 700 km until it joins the Andaman Spreading Centre and interpret these images in the light of earthquake, gravity and bathymetry data. We find that the GSF has two strands between Banda Aceh and Nicobar Island: a transpression in the south and a deep narrow active rift basin in the north dotted with volcanoes in the center, suggesting that the volcanic arc is coincident with the rifting. Further north of Nicobar Island, an active strike-slip fault cuts through a deep rifted basin until its intersection with Andaman Sea Spreading Centre. The volcanic arc lies just east of the basin. The western margin of this basin seems to be a rifted continental margin, tilted westward flooring the Andaman-Nicobar forearc basin, which was once a part of Malaya Peninsula, suggesting that a significant parts of the Andaman-Nicobar forearc system is underlain by the Sunda continental crust. The Andaman-Nicobar forearc basin is bounded in the west by backthrusts, similar to the West Andaman and Mentawai faults bounding the Aceh and Mentawai forearc basins in the south. The cluster of seismicity after the 2004 great Andaman-Sumatra earthquake just north of Nicobar Island coincides with the intersection of two NW-SE and N-S trending strike-slip fault systems. Some of hypocentre of these earthquakes lie in the mantle down to 30 km depth, which along with the presence of volcanic arc just 15 km east of these faults, suggest that there is no generic link between the strike-slip fault and volcanic arc.

Structural evolution of the Nankai inner accretionary prism constrained by thermal structure and sedimentary age of deep borehole samples

NASA Astrophysics Data System (ADS)

Fukuchi, R.; Yamaguchi, A.; Ito, H.; Yamamoto, Y.; Ashi, J.

2017-12-01

The Nankai accretionary wedge has been developed by subduction of the Philippine Sea Plate beneath the Eurasian and Amur Plate, accompanying forearc basin development upon inner wedge. To evaluate the evolutionary processes of the Nankai inner accretionary wedge, we performed vitrinite reflectance analysis and detrital zircon U-Pb age dating using cuttings retrieved from the Integrated Ocean Drilling Program (IODP) Site C0002 located within the Kumano Basin and penetrates the inner accretionary wedge down to 3058.5 m below the seafloor (mbsf). Although Ro values of vitrinite reflectance tend to increase with depth, there are two reversals (1300-1500 mbsf and 2400-2600 mbsf) of Ro values. The youngest detrital zircon U-Pb age of the cuttings from 2600.5 mbsf is 7.41 Ma, which is obviously younger than shipboard nannofossil ages (9.56-10.54 Ma) at 2245.5 mbsf. Both Ro values and the youngest detrital zircon U-Pb ages show a reversal between 2400-2600 mbsf, suggesting the existence of a thrust fault with sufficient displacement to offset both paleothermal structure and sediment age. Despite similar depositonal age and paleogeothermal gradient, lithofacies in the hanging- and footwall of the 2400-2600 mbsf thrust fault are different; volcaniclastic sediments are rare in the footwall. The lack of volcaniclastic sediments corresponding to the Middle Shikoku Basin facies in the footwall of the thrust suggests that sediments below 2600 mbsf have similar sedimentation background to that of present off-Muroto input site sediments. Thus, our synthesized model of tectonic evolutionary process of deep portion of the Nankai inner accretionary wedge is as follows: 1) 4 Ma: hemipelagic sediments, which deposited similar environment of present off-Muroto input, have accreted ( 4 Ma corresponds to the age of unconformity between forearc basin and accretionary prism (Kinoshita et al., 2009)). 2) 2 Ma: The megasplay fault was activated (Strasser et al., 2009), and Site C0002 sediments moved into inner wedge. Moving direction of the Philippine Sea Plate became NNW to WNW (Kamata and Kodama, 1999). 3) present: inner accretionary wedge has been buried with formation of Kumano forearc basin. Sediments existed offshore of the 4 Ma source area of Site C0002 have moved to off-Muroto input with the motion of the Philippine Sea Plate.

Sunda-Banda Arc Transition: Marine Wide-Angle Seismic Modeling

NASA Astrophysics Data System (ADS)

Shulgin, A.; Planert, L.; Kopp, H.; Mueller, C.; Lueschen, E.; Engels, M.; Flueh, E.; Djajadihardja, Y.; Sindbad Working Group, T

2008-12-01

The Sunda-Banda Arc transition is the region of active convergence and collision of the Indo-Australian and Eurasian Plates. The style of subduction changes from an oceanic-island arc subduction to a continental- island arc collision. The character of the incoming plate varies from the rough topography of the Roo Rise, to the smooth seafloor of the Abyssal Plain off Bali, Sumbawa. Forearc structures include well-developed forearc basins and an accretionary prism/outer forearc high of variable size and shape. To quantify the variability of structure of the lower plate and the effects on the upper plate a refraction seismic survey was carried during cruise SO190-2. A total of 245 ocean bottom seismometers were deployed along 1020 nm of wide-angle seismic profiles in four major north-south oriented corridors. To assess the velocity structure we used a tomographic method which jointly inverts for refracted and reflected phases. The sedimentary layers of the models, obtained by the analysis of high-resolution MCS data (see Lueschen et al), were incorporated into the starting model. The obtained models exhibit strong changes of the incoming oceanic crust for the different portions of the margin: The westernmost profile off eastern Java shows a crustal thickness of more than 15 km, most likely related to the presence of an oceanic plateau. Profiles off Lombok reveal an oceanic crust of 8-9 km average thickness in the Argo Abyssal Plain. Crustal and upper mantle velocities are slightly decreased within an area of about 50-60 km seaward of the trench, indicating fracturing and related serpentinization due to bending of the oceanic crust and associated normal faulting. The outer forearc high is characterized by velocities of 2.5-5.5 km/s. For the Lombok Basin, the profiles show a sedimentary infill of up to 3.5 km thick and typical sediment velocities of 1.75-3.0 km/s. A reflector at 16 km depth and velocity values of 7.4-7.8 km/s beneath it suggest the presence of a shallow forearc mantle and a hydrated mantle wedge in this part of the margin. See in this session Planert et al.

Heavy Oil and Natural Bitumen Resources in Geological Basins of the World

USGS Publications Warehouse

Meyer, Richard F.; Attanasi, E.D.; Freeman, P.A.

2007-01-01

Heavy oil and natural bitumen are oils set apart by their high viscosity (resistance to flow) and high density (low API gravity). These attributes reflect the invariable presence of up to 50 weight percent asphaltenes, very high molecular weight hydrocarbon molecules incorporating many heteroatoms in their lattices. Almost all heavy oil and natural bitumen are alteration products of conventional oil. Total resources of heavy oil in known accumulations are 3,396 billion barrels of original oil in place, of which 30 billion barrels are included as prospective additional oil. The total natural bitumen resource in known accumulations amounts to 5,505 billion barrels of oil originally in place, which includes 993 billion barrels as prospective additional oil. This resource is distributed in 192 basins containing heavy oil and 89 basins with natural bitumen. Of the nine basic Klemme basin types, some with subdivisions, the most prolific by far for known heavy oil and natural bitumen volumes are continental multicyclic basins, either basins on the craton margin or closed basins along convergent plate margins. The former includes 47 percent of the natural bitumen, the latter 47 percent of the heavy oil and 46 percent of the natural bitumen. Little if any heavy oil occurs in fore-arc basins, and natural bitumen does not occur in either fore-arc or delta basins.

Arc/Forearc Lengthening at Plate Triple Junctions and the Formation of Ophiolitic Soles

NASA Astrophysics Data System (ADS)

Casey, John; Dewey, John

2013-04-01

The principal enigma of large obducted ophiolite slabs is that they clearly must have been generated by some form of organized sea-floor spreading/plate-accretion, such as may be envisioned for the oceanic ridges, yet the volcanics commonly have arc affinity (Miyashiro) with boninites (high-temperature/low-pressure, high Mg and Si andesites), which are suggestive of a forearc origin. PT conditions under which boninites and metamorphic soles form and observations of modern forearc systems lead us to the conclusion that ophiolite formation is associated with overidding plate spreading centers that intersect the trench to form ridge-trench-trench of ridge-trench-tranform triple junctions. The spreading centers extend and lengthen the forearc parallel to the trench and by definition are in supra-subduction zone (SSZ) settings. Many ophiolites likewise have complexly-deformed associated mafic-ultramafic assemblages that suggest fracture zone/transform t along their frontal edges, which in turn has led to models involving the nucleation of subduction zones on fracture zones or transpressional transforms. Hitherto, arc-related sea-floor-spreading has been considered to be either pre-arc (fore-arc boninites) or post-arc (classic Karig-style back arc basins that trench-parallell split arcs). Syn-arc boninites and forearc oceanic spreading centers that involve a stable ridge/trench/trench triple or a ridge-trench-transform triple junction, the ridge being between the two upper plates, are consistent with large slab ophiolite formation in a readied obduction settting. The direction of subduction must be oblique with a different sense in the two subduction zones and the oblique subduction cannot be partitioned into trench orthogonal and parallel strike-slip components. As the ridge spreads, new oceanic lithosphere is created within the forearc, the arc and fore-arc lengthen significantly, and a syn-arc ophiolite forearc complex is generated by this mechanism. The ophiolite ages along arc-strike; a distinctive diachronous MORB-like to boninitic to arc volcanic stratigraphy develops vertically in the forearc and eruption centers progressively migrate from the forearc back to the main arc massif with time. Dikes in the ophiolite are highly oblique to the trench (as are back-arc magnetic anomalies. Boninites and high-mg andesites are generated in the fore-arc under the aqueous, low pressure/high temperature, regime at the ridge above the instantaneously developed subducting and dehydrating slab. Subducted slab refrigeration of the hanging wall ensues and accretion of MORB metabasites to the hanging wall of the subduction channel initiates. Mafic protolith garnet/two pyroxene granulites to greenschists accrete and form the inverted P and T metamorphic sole prior to obduction. Sole accretion of lithosphere begins at about 1000°C and the full retrogressive sole may be fully formed within ten to fifteen million years of accretion, at which time low grade subduction melanges accrete. Obduction of the SSZ forearc ophiolite with its subjacent metamorphic sole occurs whenever the oceanic arc attempts subduction of a stable buoyant continental or back arc margin.

Forearc Basin Location Originating From Tectonic Inversion Along an old Ophiolite Suture : the Gulf of Guayaquil-Tumbes Basin (Ecuador-Peru Border)

NASA Astrophysics Data System (ADS)

Bourgois, J.; Witt, C.

2008-12-01

The Gulf of Guayaquil-Tumbes basin (GGTB) located along the Andean forearc (Ecuador-Peru border) developed in the tectonic wake of the coastwise, northward migrating North Andean block (NAB). The Industrial multichannel seismic and well data (Witt and Bourgois, in press) document that E-W trending low- angle (10-20°) detachment normal faults accommodated the main basin subsidence steps during the Late Pliocene-Quaternary times (1.8-1.6 Ma to Present). It includes the Posorja Jambeli and the northward dipping Tumbes Zorritos detachment systems (PJDS and TZDS) located respectively along the northern and southern edge of the basin. A major transfer system, the N-S trending Inner Domito Banco Peru fault system bounds the detachment systems to the West. The right lateral transcontinental strike-slip system of the Dolores Guayaquil Megashear bounds the basin to the East. Since the PJDS and TZDS extend 80 to 120 km at seafloor they must penetrate the brittle continental crust, far below the 6-8 km thick sediment accumulation at basin depocenters. We assume that detachments extend deep into the 8-10 km thick brittle crust down to the Nazca-South America plate interface at less than ~20 km beneath sea bottom at site. The active TZDS, which connects landward with the continental structures assumed to be part of the eastern frontier of the NAB is the master detachment fault system controlling the basin evolution through time. Gravimetric and geologic data show that depocenters are located along the 80-60 Ma obduction bounding at depth the Cretaceous ophiolite of northern Andes from the westward underthrusted South America continental basement (Bourgois et al., 1987). Because inference suggests the obduction megathrust to branch upward to the TZDS, we hypothesized that tectonic inversion occurred along the ophiolite suture during the GGTB evolution, at least for the past 1.8-1.6 Myr. The 80-60 Ma ophiolite suture is an old zone of weakness, which reactivation from the NAB northward drift controlled the GGTB location. Bourgois, J., Toussaint, J-F, Gonzales, H., Azema, J., Calle, B., Desmet, A., Murcia L.A., Acevedo, A.P., Parra, E., and Tournon, J., 1987, Geological history of the Cretaceous ophiolitic complexes of Northwestern South America (Colombia Andes): Tectonophysics, v. 143, p. 307-327. Witt, C. and Bourgois, J., Forearc basin formation in the tectonic wake of a collision-driven, coastwise migrating crustal block: the example of the North Andean block and the extensional Gulf of Guayaquil-Tumbes basin (Ecuador-Peru border area): Geological Society of America Bulletin, in press.

Sediment sound velocities from Sonobuoys: Sunda Trench and forearc basins, Nicobar and Central Bengal Fans, and Andaman Sea Basins

NASA Astrophysics Data System (ADS)

Bachman, Richard T.; Hamilton, Edwin L.; Curray, Joseph R.

1983-11-01

Supplement is available with entire article on microfiche. Order from American Geophysical Union, 2000 Florida Avenue, N.W., Washington, DC 20009. Document B83-007; $2.50. Payment must accompany order. Measurements of mean sound velocities in the first, largely unlithified layers in the seafloor were made using the sonobuoy technique in several areas in the northern Indian Ocean. Older measurements were added to new measurements, and regressions for mean and instantaneous velocity versus one-way travel time of sound are presented for the central Bengal Fan, the central Andaman Sea Basin, the Nicobar Fan, and the Sunda Trench. New data and regression equations are presented for the Mergui-north Sumatra Basin and for four forearc basins between Sumatra and Java and the Sunda Trench. Minimum velocity gradients were found in those areas where sedimentation rates were high, and sediments have accumulated in thick sections which have not had time to fully consolidate (porosity in the top of the sediment section has not been fully reduced under overburden pressure). These minimum velocity gradients (just under the seafloor) were found in the four forearc basins where they ranged from 0.34 s-1 to 0.84 s-1 with an average of 0.58 s-1. The near-surface velocity gradient in the Sunda Trench was 1.33 s-1, but was higher in the adjacent, fossil Nicobar Fan (1.62 s-1). In the surface of the Bengal Fan the velocity gradient was low in the upper fan (0.86 s-1), high in the central fan (1.94 s-1), and again lower in the southern fan (1.18 s-1), which may support sedimentation models calling for bypassing of the central fan and higher rates of accumulation on the southern fan.

Mélange versus forearc contributions to sedimentation and uplift, during rapid denudation of a young Banda forearc-continent collisional belt

NASA Astrophysics Data System (ADS)

Duffy, Brendan; Kalansky, Julie; Bassett, Kari; Harris, Ron; Quigley, Mark; van Hinsbergen, Douwe J. J.; Strachan, Lorna J.; Rosenthal, Yair

2017-05-01

New sedimentary geochemistry and petrographic analyses provide the most extensive sedimentary documentation yet of the rapid denudation of the young Timor orogen. The data from three basins including two widely-separated, well-dated sections of the Synorogenic Megasequence of Timor-Leste, and a re-dated DSDP 262, constrain the source and timing of detrital sediment flux during forearc-continent collision along the Timor sector of the Banda Arc. The exhumed synorogenic piggy-back basins formed above a mélange unit that developed at the expense of a weak stratigraphic horizon in the Mesozoic stratigraphy, and was exhumed to the sea floor in latest Messinian time. Following an interval of deep marine chalky marl sedimentation, an increasingly muddy sediment flux indicates that the island of Timor became emergent and shed sediment by 4.5 Ma. Comparison of exhumed sections with similar patterns in the DSDP262 chemistry suggests that the sediment source was probably located some 50-60 km distant from the basin, which is consistent with the Aileu region of Timor-Leste that shows an appropriate exhumation history. All sedimentation between 4.5 and 3.2 Ma was probably derived from a low-relief, rapidly eroding, and mudstone-dominated landscape with geochemical affinities to the Triassic-mudstone-derived synorogenic mélange. The mélange unit overlies and surrounds the Banda Terrane, and was presumably structurally emplaced by propagation of a decollement through the Triassic rocks during the collision. After 3.2 Ma, sedimentation was dominated by hard rock lithologies of the Banda Terrane, consisting of forearc cover and basement, the latter including elements of metamafic rocks and metapelites. This phase of sedimentation was accompanied by rapid uplift, which may have been partly driven by a transient imbalance between rock uplift and denudation as resistant lithologies emerged from below mélange-like mudstone. Previous work has suggested that the timing of collision in Timor-Leste and West Timor was substantially different. Our reevaluation of DSDP 262 facies migration history in the context of the re-dating presented here, favours a relatively synchronous onset of uplift in both halves of the island, but with different partitioning of strain between the foreland and hinterland in each half of the island.

Depositional environment, sand provenance, and diagenesis of the Basal Salina Formation (lower Eocene), northwestern Peru

NASA Astrophysics Data System (ADS)

Marsaglia, K. M.; Carozzi, A. V.

The Basal Salina Formation is a lower Eocene transgressive sequence consisting of interbedded shales, siltstones, and conglomeratic sandstones. This formation occurs in the Talara basin of northwestern Peru and is one of a series of complexly faulted hydrocarbon-producing formations within this extensional forearc basin. These sediments were probably deposited in a fan-delta complex that developed along the ancestral Amotape Mountains during the early Eocene. Most of the sediment was derived from the low-grade metamorphic and plutonic rocks that comprise the Amotape Mountains, and their sedimentary cover. Detrital modes of these sandstones reflect the complex tectonic history of the area, rather than the overall forearc setting. Unlike most forearc sediments, these are highly quartzose, with only minor percentages of volcanic detritus. This sand is variably indurated and cemented by chlorite, quartz, calcite, and kaolinite. Clay-mineral matrix assemblages show gradational changes with depth, from primarily detrital kaolinite to diagenetic chlorite and mixed-layered illite/smectite. Basal Salina sandstones exhibit a paragenetic sequence that may be tied to early meteoric influx or late-stage influx of thermally driven brines associated with hydrocarbon migration. Much of the porosity is secondary, resulting from a first-stage dissolution of silicic constituents (volcanic lithic fragments, feldspar, and fibrous quartz) and a later dissolution of surrounding carbonate cement. Types of pores include skeletal grains, grain molds, elongate pores, and fracture porosity. Measured porosity values range up to 24% and coarser samples tend to be more porous. Permeability is enhanced by fractures and deterred by clay-mineral cements and alteration residues.

In situ stress and pore pressure in the Kumano Forearc Basin, offshore SW Honshu from downhole measurements during riser drilling

NASA Astrophysics Data System (ADS)

Saffer, D. M.; Flemings, P. B.; Boutt, D.; Doan, M.-L.; Ito, T.; McNeill, L.; Byrne, T.; Conin, M.; Lin, W.; Kano, Y.; Araki, E.; Eguchi, N.; Toczko, S.

2013-05-01

situ stress and pore pressure are key parameters governing rock deformation, yet direct measurements of these quantities are rare. During Integrated Ocean Drilling Program (IODP) Expedition #319, we drilled through a forearc basin at the Nankai subduction zone and into the underlying accretionary prism. We used the Modular Formation Dynamics Tester tool (MDT) for the first time in IODP to measure in situ minimum stress, pore pressure, and permeability at 11 depths between 729.9 and 1533.9 mbsf. Leak-off testing at 708.6 mbsf conducted as part of drilling operations provided a second measurement of minimum stress. The MDT campaign included nine single-probe (SP) tests to measure permeability and in situ pore pressure and two dual-packer (DP) tests to measure minimum principal stress. Permeabilities defined from the SP tests range from 6.53 × 10-17 to 4.23 × 10-14 m2. Pore fluid pressures are near hydrostatic throughout the section despite rapid sedimentation. This is consistent with the measured hydraulic diffusivity of the sediments and suggests that the forearc basin should not trap overpressures within the upper plate of the subduction zone. Minimum principal stresses are consistently lower than the vertical stress. We estimate the maximum horizontal stress from wellbore failures at the leak-off test and shallow MDT DP test depths. The results indicate a normal or strike-slip stress regime, consistent with the observation of abundant active normal faults in the seaward-most part of the basin, and a general decrease in fault activity in the vicinity of Site C0009.

What controls landward vergence of the accretionary prism offshore northern Sumatra?

NASA Astrophysics Data System (ADS)

Frederik, M. C. G.; Gulick, S. P. S.; Austin, J. A., Jr.; Bangs, N. L.; Udrekh, U.

2014-12-01

The accretionary prism offshore northern Sumatra consists of steep outer slopes (5-12°), and a plateau ~100-120 km wide comprised of anticlinal folds of 2-16 km wavelength seaward of a steep slope adjacent to the Aceh (forearc) Basin. Our study area, 1-7°N and 92-97°E, covers the entire forearc from northwest of Aceh to west of Simeulue Island. Five 2D MCS seismic profiles transecting the prism from the Sunda Trench to the Aceh Basin, along with multibeam data, have been used to investigate wedge morphology and structure. Analysis of fold vergence along the profiles and areal classification of the predominant vergence reveal three structural zones: 1) predominantly landward-vergent folds near the Sunda Trench, 2) predominantly seaward-vergent folds near the Aceh Basin, and 3) mixed vergent folds between those two zones. Extensive landward vergence is uncommon in accretionary prisms worldwide. One explanation is the existence of a backstop with a seaward dipping edge, such that overlying younger sediments accreted to the prism form landward-vergent folds. We propose a backstop geometry that extends from under the Aceh Basin to under the mixed vergence zone, based on the observed structural zones and published velocity models of this margin. The backstop may consist either of older accreted sediment or the granitic Sunda Block. With the existence of a strong inner wedge acting as a backstop, together with suspected indurated sediments forming the landward vergence zone, rupture during major subduction zone earthquakes nucleating under the forearc basin or central plateau high can propagate farther seaward toward the Sunda Trench and displace greater volumes of water than a more landward rupture, yielding more hazardous tsunami. Using bathymetric data of before and after the 2004 earthquake, we are now testing the hypothesis that maximum slip occurs near the trench. These results will be presented.

Fore-arc mantle peridotites and back-arc basin basalts from the Izu-Bonin-Mariana subduction factory (ODP LEGs 125 and 195): a modern analogue for Mediterranean ophiolites

NASA Astrophysics Data System (ADS)

Zanetti, A.; D'Antonio, M.; Vannucci, R.; Raffone, N.; Spadea, P.

2009-04-01

Serpentinites, basaltic lavas and calc-alkaline volcanoclastic sequences sampled during recent Ocean Drilling Program cruises in the western Pacific Ocean allow comparisons with ophiolites from eastern Mediterranean area, which are believed to be related to marginal seas characterised by rapidly propagating back-arc extension and slab rollback (e.g. Albania and Cyprus). Serpentinites recovered at the Torishima, Conical and South Chamorro Seamounts (ODP Legs 125 and 195), located on the Izu-Bonin-Mariana (IBM) forearc, still record complex petrochemical features acquired during their high-T mantle evolution. This latter has been referred to a three-stages-model, involving in chronological sequence: 1) adiabatic mantle upwelling accompanied by 20-25% polybaric partial melting; 2) local depletion in modal orthopyroxene determined by reactive melt migration; 3) late interstitial crystallisation of ultra-depleted to depleted melts. The record of the first stage is preserved in the less-refractory IBM forearc peridotites, which compositions lie on trends describing the decompression melting of uprising asthenospheric mantle. During this stage, the peridotites were actual melt sources. The large average degree of depletion suggests that partial melting events were assisted by particularly hot geotherms. The second stage occurred at relatively lower pressures, according to the large orthopyroxene dissolution, and is guessed to be firmly related to arc volcanism. Nevertheless, the progressive change of oxidation state of the mantle minerals, which decreases from the Torishima (N Izu-Bonin forearc) through the Conical (N Mariana forearc) to the South Chamorro Seamount (S Mariana forearc), highlights a marked gradient in terms of contribution to the uprising melts from slab-derived component. It is argued that the melt compositions changed from boninitic (at Torishima) to depleted-MORB at (South Chamorro). The third stage determined the petrographic and mineralogical features occurring in all IBM forearc peridotites (e.g. crystallisation of late cpx, embayment of opx porphyroclasts), and likely marks the accretion of the mantle sequence to the thermal boundary layer. It was accompanied by the devolopment of transient geochemical gradients in the migrating liquids mainly governed by chromatographic-type chemical exchange with the peridotite. The West Philippine Basin (WPB) is a back-arc basin that opened in the Philippine Sea Plate (PSP) between the current position of the Palau-Kyushu Ridge (PKR) and the margin of East Asia. Spreading occurred at the Central Basin Fault (CBF) from 54 to 30 Ma. The PKR was active since ~48 to 35 Ma constituting a single volcanic arc with the Izu-Bonin-Mariana Arc. ODP Leg 195 Site 1201 is located in the WPB, ~100 km west of the PKR, on 49 Ma basaltic crust formed by NE-SW spreading at the CBF. From ~35 to 30 Ma, pelagic sedimentation at Site 1201 was followed by turbidite sedimentation, fed mostly by early Mariana Arc (PKR)-derived volcanic clasts. These volcanics are calc-alkaline, whereas PKR rocks from literature have mostly boninitic and arc tholeiitic affinity; the WPB basement basalts have MORB to arc-like affinity, as expected for a back-arc basin. Sr, Nd, Pb and Hf isotope data highlight the Indian Ocean MORB-like character of WPB basement basalts, suggesting an upper mantle domain distinct from that underlying the Pacific Plate. The geochemical and isotopic features of PKR volcanics reflect higher amounts of subduction-derived components, added mostly as siliceous melts, in the source of arc magmas relative to that of basement basalts. In that respect, Site 1201 PKR volcanics resemble calc-alkaline volcanics of the currently active Mariana Arc. In addition, their calc-alkaline affinity, unradiogenic neodymium, and inferred Middle Oligocene age, suggest they might represent an evolved stage of arc volcanism at Palau-Kyushu Ridge, perhaps shortly before the end of its activity.

Tectonics and geology of spreading ridge subduction at the Chile Triple Junction: a synthesis of results from Leg 141 of the Ocean Drilling Program

USGS Publications Warehouse

Behrmann, J.H.; Lewis, S.D.; Cande, S.C.

1994-01-01

An active oceanic spreading ridge is being subducted beneath the South American continent at the Chile Triple Junction. This process has played a major part in the evolution of most of the continental margins that border the Pacific Ocean basin. A combination of high resolution swath bathymetric maps, seismic reflection profiles and drillhole and core data from five sites drilled during Ocean Drilling Program (ODP) Leg 141 provide important data that define the tectonic, structural and stratigraphic effects of this modern example of spreading ridge subduction. A change from subduction accretion to subduction erosion occurs along-strike of the South American forearc. This change is prominently expressed by normal faulting, forearc subsidence, oversteepening of topographic slopes and intensive sedimentary mass wasting, overprinted on older signatures of sediment accretion, overthrusting and uplift processes in the forearc. Data from drill sites north of the triple junction (Sites 859-861) show that after an important phase of forearc building in the early to late Pliocene, subduction accretion had ceased in the late Pliocene. Since that time sediment on the downgoing oceanic Nazca plate has been subducted. Site 863 was drilled into the forearc in the immediate vicinity of the triple junction above the subducted spreading ridge axis. Here, thick and intensely folded and faulted trench slope sediments of Pleistocene age are currently involved in the frontal deformation of the forearc. Early faults with thrust and reverse kinematics are overprinted by later normal faults. The Chile Triple Junction is also the site of apparent ophiolite emplacement into the South American forearc. Drilling at Site 862 on the Taitao Ridge revealed an offshore volcanic sequence of Plio-Pleistocene age associated with the Taitao Fracture Zone, adjacent to exposures of the Pliocene-aged Taitao ophiolite onshore. Despite the large-scale loss of material from the forearc at the triple junction, ophiolite emplacement produces a large topographic promontory in the forearc immediately after ridge subduction, and represents the first stage of forearc rebuilding. ?? 1994 Springer-Verlag.

Publications - PIR 2015-5-3 | Alaska Division of Geological & Geophysical

Science.gov Websites

content DGGS PIR 2015-5-3 Publication Details Title: Preliminary investigation of fracture populations in , Preliminary investigation of fracture populations in Mesozoic strata of the Cook Inlet forearc basin: Iniskin

Neotectonic control on drainage systems: GIS-based geomorphometric and morphotectonic assessment for Crete, Greece

NASA Astrophysics Data System (ADS)

Argyriou, Athanasios V.; Teeuw, Richard M.; Soupios, Pantelis; Sarris, Apostolos

2017-11-01

Geomorphic indices can be used to examine the geomorphological and tectonic processes responsible for the development of the drainage basins. Such indices can be dependent on tectonics, erosional processes and other factors that control the morphology of the landforms. The inter-relationships between geomorphic indices can determine the influence of regional tectonic activity in the shape development of drainage basins. A Multi-Criteria Decision Analysis (MCDA) procedure has been used to perform an integrated cluster analysis that highlights information associated with the dominant regional tectonic activity. Factor Analysis (FA) and Analytical Hierarchy Process (AHP) were considered within that procedure, producing a representation of the distributed regional tectonic activity of the drainage basins studied. The study area is western Crete, located in the outer fore-arc of the Hellenic subduction zone, one of the world's most tectonically active regions. The results indicate that in the landscape evolution of the study area (especially the western basins) tectonic controls dominate over lithological controls.

Cruise Report, INDOPAC Expedition, Legs 9 through 16.

DTIC Science & Technology

1977-11-23

a run in the Mergui-North Sumatra Basin . geological and geophysical study of the About 2700 km of multi-channel seismic Andaman Sea. Previous...in the Mergui-North Sumatra runs and large shots were monitored by the Basin was launched. The moored buoy was at M.O.C. shore station . the north...and including Nias Island. The SN fore-arc basin lying between this nonvolcanic ridge and Sumatra is a/ .• • • ••. •~~~~ \\ subsiding zone

Field and experimental evidence for coseismic ruptures along shallow creeping faults in forearc sediments of the Crotone Basin, South Italy

NASA Astrophysics Data System (ADS)

Balsamo, Fabrizio; Aldega, Luca; De Paola, Nicola; Faoro, Igor; Storti, Fabrizio

2014-05-01

Large seismic slip occurring along shallow creeping faults in tectonically active areas represents an unsolved paradox, which is largely due to our poor understanding of the mechanics governing creeping faults, and to the lack of documented geological evidence showing how coseismic rupturing overprints creep in near-surface conditions. In this contribution we integrate field, petrophysical, mineralogical and friction data to characterize the signature of coseismic ruptures propagating along shallow creeping faults affecting unconsolidated forearc sediments of the seismically active Crotone Basin, in South Italy. Field observations of fault zones show widespread foliated cataclasites in fault cores, locally overprinted by sharp slip surfaces decorated by thin (0.5-1.5 cm) black gouge layers. Compared to foliated cataclasites, black gouges have much lower grain size, porosity and permeability, which may have facilitated slip weakening by thermal fluid pressurization. Moreover, black gouges are characterized by distinct mineralogical assemblages compatible with high temperatures (180-200°C) due to frictional heating during seismic slip. Foliated cataclasites and black gouges were also produced by laboratory friction experiments performed on host sediments at sub-seismic (≤ 0.1 m/s) and seismic (1 m/s) slip rates, respectively. Black gouges display low friction coefficients (0.3) and velocity-weakening behaviours, as opposed to high friction coefficients (0.65) and velocity-strengthening behaviours shown by the foliated cataclasites. Our results show that narrow black gouges developed within foliated cataclasites represent a potential diagnostic marker for episodic seismic activity in shallow creeping faults. These findings can help understanding the time-space partitioning between aseismic and seismic slip of faults at shallow crustal levels, impacting on seismic hazard evaluation of subduction zones and forearc regions affected by destructive earthquakes and tsunamis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trevena, A.S.; Varga, R.J.; Collins, I.D.

Salin basin of central Myanmar is a tertiary fore-arc basin that extends over 10,000 mi{sup 2} and contains 30,000+ ft of siliciclastic rocks. In the western Salin basin, Tertiary deltaic and fluvial formations contain thousands of feet of lithic sandstones that alternate with transgressive shallow marine shales. Facies and paleocurrent studies indicate deposition by north-to-south prograding tidal deltas and associated fluvial systems in a semi-restricted basin. Presence of serpentinite and volcanic clasts in Tertiary sandstones may imply that the basin was bounded to the east by the volcanic arc and to the west by a fore-arc accretionary ridge throughout muchmore » of the Cenozoic. Salin basin is currently defined by a regional north/south-trending syncline with uplifts along the eastern and western margins. Elongate folds along the eastern basin margin verge to the east and lie above the reverse faults that dip west; much of Myanmar's present hydrocarbon production is from these structures. Analogous structures occur along the western margin, but verge to the west and are associated with numerous hydrocarbon seeps and hand-dug wells. These basin-bounding structures are the result of fault-propagation folding. In the western Salin basin, major detachments occur within the shaly Tabyin and Laungshe formations. Fault ramps propagated through steep forelimbs on the western sides of the folds, resulting in highly asymmetric footwall synclines. Stratigraphic and apatite fission track data are consistent with dominantly Plio-Pleistocene uplift, with limited uplift beginning approximately 10 Ma. Paleostress analysis of fault/slickenside data indicates that fold and thrust structures formed during regional east/west compression and are not related in any simple way to regional transpression as suggested by plate kinematics.« less

Geochemistry of siliciclastic rocks in the Peninsular, Chugach, and Prince William terranes: Implications for the tectonic evolution of south central Alaska

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, S.A.; Casey, J.F.; Bradley, D.

1992-01-01

According to some interpretations, south-central Alaska consists of a series of unrelated terranes juxtaposed by dominantly strike-slip motions some time after formation. Alternatively, these so-called terranes may be related components of a seaward-facing arc, forearc, and accretionary prism. To shed new light on the tectonic history of this area, 150 samples of siliciclastic rocks were analyzed for major, trace, and rare earth elements (REE). Shales were sampled from the Upper Cretaceous Matanuska and Paleogene Chickaloon Fms. of the Peninsular Terrane (forearc basin); argillaceous melange matrix from the Mesozoic McHugh Complex and slate from turbidites of the Upper Cretaceous Valdez Groupmore » of the Chugach Terrane (landward part of accretionary prism); and slate from turbidites of the Paleogene Orea Group of the Prince William Terrane (seaward part of accretionary prism). One tectonic model that may fit these geochemical data requires an early linkage between the Peninsular and Chugach-Prince William composite terranes. The geochemical signatures suggest that the McHugh Complex was derived from a mafic volcanic source and may represent an early accretionary stage of sediments derived from an oceanic arc. The progressive continental enrichment of the Valdez and Orca Groups may reflect later accretionary processes during and/or after the collision of the Talkectna arc with the North American continent. The similar increasingly continental source documented in the geochemistry of the forearc basin shales of the Matanuska and Chickaloon Fms. may suggest: that the presently defined Peninsular, Chugach, and Prince William terranes collectively represent one continuously evolving, seaward facing arc, forearc, and accretionary prism complex.« less

Oligocene and Early Miocene coral faunas from Iran: palaeoecology and palaeobiogeography

NASA Astrophysics Data System (ADS)

Schuster, F.; Wielandt, U.

Oligocene and Early Miocene coral assemblages from three sections of central Iran are investigated with respect to their palaeoecological and palaeobiogeographic implications. These corals are compared with faunas from the Mediterranean Tethys and the Indopacific. Associated larger foraminifers are used for biostratigraphy and to support the palaeoecological interpretation. The studied sections are situated in the foreland basins of the Iranian Plate which is structured into a fore-arc and a back-arc basin separated by a volcanic arc. The coral assemblages from Abadeh indicate a shallowing-upward trend. Infrequently distributed solitary corals at the base of the section indicate a turbid environment. Above, a distinct horizon characterised by a Leptoseris-Stylophora assemblage associated with lepidocyclinids and planktonic foraminifers is interpreted as maximum flooding surface. Small patch reefs with a Porites-Faviidae assemblage are a common feature of Late Oligocene to Early Miocene coral occurrences and indicate water depths of less than 20m. The diversity of the coral faunas shows marked differences. Oligocene corals from the Esfahan-Sirjan fore-arc basin comprise more than 45 species of 32 genera and occur in a wide range of environments. Early Miocene corals from the Qom back-arc basin are less frequent, show a lower diversity (13 genera with 15 species) and occur in single horizons or small patch reefs.

Tectonic Evolution of the Izmir Ankara Suture Zone in Northwest Turkey Using Zircon U-Pb Geochronology and Zircon Lu-Hf Isotopic Tracers

NASA Astrophysics Data System (ADS)

Campbell, C.; Taylor, M. H.; Licht, A.; Mueller, M.; Ocakglu, F.; Moeller, A.; Metais, G.; Beard, K. C.

2017-12-01

Detrital zircons from a Cretaceous forearc basin and Tertiary foreland basin located along the Sakarya Zone of the Western Pontides were analyzed to better understand the closure history of the Tethyan oceans. The Variscan Orogeny is characterized by abundant 350-300 Ma U-Pb ages and vertical ɛHf arrays, consistent with a mature magmatic arc that emplaced plutons through a southward growing accretionary margin. An ɛHf pull-up is observed from 300-250 Ma interpreted as rifting of the Intra-Pontide Ocean. The Cimmerian Orogeny is characterized by a 250-230 Ma ɛHf pull-down, followed by a 230-200 Ma magmatic gap consistent with underthrusting of the Karakaya Complex. From 200-120 Ma another magmatic lull is observed. The Alpine Orogeny is characterized by an ɛHf pull-down from 120-85 Ma within Cretaceous forearc sediments and a 100 Ma deviant ɛHf vertical array within Tertiary foreland basin sediments. Minor zircon U-Pb age peaks and contrasting inter-basinal ɛHf evolution are interpreted to represent onset of Andean-style subduction along the southern margin of the Sakarya Zone at 120 Ma followed by crustal thickening until 85 Ma. The deviant 100 Ma ɛHf vertical array within foreland basin detritus is interpreted as initiation of intra-oceanic subduction within the Izmir-Ankara Ocean. An 85-75 Ma ɛHf pull-up from forearc basin sediments is interpreted as slab roll-back along the southern margin of the Sakarya Zone, responsible for final rifting of the Western Black Sea. At 80 Ma, a vertical ɛHf array from Tertiary foreland basin deposits is interpreted to represent synchronous melting of the Tavsanli Zone and intra-oceanic slab break-off. A single 66 Myr pre-collisional grain defines a sharp ɛHf pull-down immediately prior to total arc shut-off, interpreted to represent incipient collision between the Sakarya and Tavsanli zones. A 52 Ma syn-collisional tuff yields minimally intermediate ɛHf values followed by a slight 48 Ma ɛHf pull-down, interpreted as a second episode of slab break-off followed by crustal thickening, a result of renewed underthrusting.

Surface sediment remobilization triggered by earthquakes in the Nankai forearc region

NASA Astrophysics Data System (ADS)

Okutsu, N.; Ashi, J.; Yamaguchi, A.; Irino, T.; Ikehara, K.; Kanamatsu, T.; Suganuma, Y.; Murayama, M.

2017-12-01

Submarine landslides triggered by earthquakes generate turbidity currents (e.g. Piper et al., 1988; 1999). Recently several studies report that the remobilization of the surface sediment triggered by earthquakes can also generate turbidity currents. However, studies that proposed such process are still limited (e.g. Ikehara et al., 2016; Mchugh et al., 2016; Moernaut et al., 2017). The purpose of this study is to examine those sedimentary processes in the Nankai forearc region, SW Japan using sedimentary records. We collected 46 cm-long multiple core (MC01) and a 6.7 m-long piston core (PC03) from the small basin during the R/V Shinsei Maru KS-14-8 cruise. The small confined basin, which is our study site, block the paths of direct sediment supply from river-submarine canyon system. The sampling site is located at the ENE-WSW elongated basin between the accretionary prism and the forearc basin off Kumano without direct sediment supply from river-submarine canyon system. The basin exhibits a confined basin that captures almost of sediments supplied from outside. Core samples are mainly composed of silty clay or very fine sand. Cs-137 measurement conducted on a MC01 core shows constantly high value at the upper 17 cm section and no detection below it. Moreover, the sedimentary structure is similar to fine-grained turbidite described by Stow and Shanmgam (1980), we interpret the upper 17 cm of MC01 as muddy turbidite. Grain size distribution and magnetic susceptibility also agree to this interpretation. Rapid sediment deposition after 1950 is assumed and the most likely event is the 2004 off Kii peninsula earthquakes (Mw=6.6-7.4). By calculation from extent of provenance area, which are estimated by paleocurrent analysis and bathymetric map, and thickness of turbidite layer we conclude that surface 1 cm of slope sediments may be remobilized by the 2004 earthquakes. Muddy turbidites are also identified in a PC03 core. The radiocarbon age gap of 170 years obtained around 2 mbsf of PC03 core also indicates similar sedimentary process. However, we also obtained large age gap in a thick turbidite layer, indicating remobilization of deeper sediments by landslide. Our results revealed that the studied basin recorded various scales and styles of sediment remobilizations by earthquake shakings.

Age of Izu-Bonin-Mariana arc basement

NASA Astrophysics Data System (ADS)

Ishizuka, Osamu; Hickey-Vargas, Rosemary; Arculus, Richard J.; Yogodzinski, Gene M.; Savov, Ivan P.; Kusano, Yuki; McCarthy, Anders; Brandl, Philipp A.; Sudo, Masafumi

2018-01-01

Documenting the early tectonic and magmatic evolution of the Izu-Bonin-Mariana (IBM) arc system in the Western Pacific is critical for understanding the process and cause of subduction initiation along the current convergent margin between the Pacific and Philippine Sea plates. Forearc igneous sections provide firm evidence for seafloor spreading at the time of subduction initiation (52 Ma) and production of "forearc basalt". Ocean floor drilling (International Ocean Discovery Program Expedition 351) recovered basement-forming, low-Ti tholeiitic basalt crust formed shortly after subduction initiation but distal from the convergent margin (nominally reararc) of the future IBM arc (Amami Sankaku Basin: ASB). Radiometric dating of this basement gives an age range (49.3-46.8 Ma with a weighted average of 48.7 Ma) that overlaps that of basalt in the present-day IBM forearc, but up to 3.3 m.y. younger than the onset of forearc basalt activity. Similarity in age range and geochemical character between the reararc and forearc basalts implies that the ocean crust newly formed by seafloor spreading during subduction initiation extends from fore- to reararc of the present-day IBM arc. Given the age difference between the oldest forearc basalt and the ASB crust, asymmetric spreading caused by ridge migration might have taken place. This scenario for the formation of the ASB implies that the Mesozoic remnant arc terrane of the Daito Ridges comprised the overriding plate at subduction initiation. The juxtaposition of a relatively buoyant remnant arc terrane adjacent to an oceanic plate was more favourable for subduction initiation than would have been the case if both downgoing and overriding plates had been oceanic.

Slip in Great Megathrust Earthquakes and its Relation to Crustal Structure as Revealed by Satellite Free-air Gravity

NASA Astrophysics Data System (ADS)

Wells, R. E.; Blakely, R. J.; Scholl, D.

2007-12-01

In 2003, Song and Simons and Wells et al. showed that approximately 70% of the moment released during past large, shallow subduction zone thrust earthquakes occurred beneath trench-parallel, free-air gravity lows outlining the deep-sea slope terrace and its basins. The authors suggested that the basin-centered, fore-arc gravity lows might be good predictors of high seismic slip in future earthquakes. Since 2001, ten megathrust earthquakes have occurred with magnitudes greater than Mw 7.7, including the giant, Mw 9.17 Sumatra earthquake of 2004. These earthquakes provide a robust test of the idea that seismic slip is focused beneath basin-centered gravity lows, and also the related ideas that the landward maximum gravity gradient marks the effective down-dip limit of large coseismic slip, and that intrabasin, transverse gravity highs are areas of lower slip. A compilation of seismic and geodetic slip inversions for the post-2001 earthquakes and new analyses of slip for the great Antofagasta, Jalisco, and Peru events in 1995 and 1996 indicate that more than 80% of the high-slip areas occur beneath deep-sea terrace gravity lows (DSTL), and that half of the earthquake asperities lie beneath fore-arc basins or local gravity lows. The maximum gravity gradient along the landward margin of the deep-sea terrace may mark the point where thicker overlying crust and higher temperatures on the megathrust limit the down dip extent of stick-slip behavior. Onland analogues are the mountain front of the Himalaya, which approximately marks the down-dip limit of large coseismic slip along the Main Frontal Thrust, and the front of the Taiwan Central Ranges, which coincides with the limit of slip during the 1999 Chi-Chi earthquake (Mw 7.6). In the up dip direction, coseismic slip may be partitioned onto splay faults in the wedge, as occurred in the 1964 Alaska earthquake. The observed pattern of greater slip at depth beneath fore arc basins is consistent with partitioning of slip up dip, especially if outer wedge materials deform more slowly, as suggested for parts of the 2004 Sumatra rupture. Along strike variations in fore-arc gravity also correlate with changing seismic behavior. At Cape Erimo on Hokkaido, three Mw 8+ earthquakes (1952, 1968, 2003) have occurred on either side of the gravity high that overlies the Cape, with little coseismic slip beneath the high. To the northeast, the deep-sea terrace gradually narrows, as does the rupture width of the great earthquakes, until off the central Kurile Islands, the terrace disappears and the arc gravity high occupies the fore-arc. The gravity high had been an historic seismic gap that was filled by the 2006 Kurile Island earthquake (Mw 8.3). Although the earthquake nucleated under the high, the slip occurred beneath the adjacent gravity low to the northeast. This might suggest the gravity highs are not likely sources of large seismic moment, at least in M8 earthquakes. In contrast, the main asperity associated with the 2005 Sumatra (Mw 8.7) earthquake was beneath the large gravity high of Nias Island. An alternative view is that the gravity highs are stronger asperities that only rupture in giant earthquakes. Globally, the coincidence of basin- centered coseismic slip with geologic evidence of sustained subsidence of the fore-arc suggests that subduction erosion is occurring in the seismogenic zone. Recent work off Chile, Colombia, Peru, and elsewhere shows that subduction erosion is an important process in many subduction zones.

Permian arc evolution associated with Panthalassa subduction along the eastern margin of the South China block, based on sandstone provenance and U-Pb detrital zircon ages of the Kurosegawa belt, Southwest Japan

NASA Astrophysics Data System (ADS)

Hara, Hidetoshi; Hirano, Miho; Kurihara, Toshiyuki; Takahashi, Toshiro; Ueda, Hayato

2018-01-01

We have studied the petrography, geochemistry, and detrital zircon U-Pb ages of sandstones from shallow-marine forearc sediments, accretionary complexes (ACs), and metamorphosed accretionary complexes (Meta-ACs) within the Kurosegawa belt of Southwest Japan. Those rocks formed in a forearc region of a Permian island arc associated with subduction of the Panthalassa oceanic crust along the eastern margin of the South China block (Yangtze block). The provenance of the shallow-marine sediments was dominated by basaltic to andesitic volcanic rocks and minor granitic rocks during the late Middle to Late Permian. The ACs were derived from felsic to andesitic volcanic rocks during the Late Permian. The provenance of Meta-ACs was dominated by andesitic volcanic rocks in the Middle Permian. The provenance, source rock compositions, and zircon age distribution for the forearc sediments, ACs and Meta-ACs have allowed us to reconstruct the geological history of the Permian arc system of the Kurosegawa belt. During the Middle Permian, the ACs were accreted along the eastern margin of the South China block. The Middle Permian arc was an immature oceanic island arc consisting of andesitic volcanic rocks. During the Late Permian, the ACs formed in a mature arc, producing voluminous felsic to andesitic volcanic rocks. A forearc basin developed during the late Middle to Late Permian. Subsequently, the Middle Permian ACs and part of the Late Permian AC underwent low-grade metamorphism in the Late to Early Jurassic, presenting the Meta-ACs.

Why the sacramento delta area differs from other parts of the great valley: numerical modeling of thermal structure and thermal subsidence of forearc basins

USGS Publications Warehouse

Mikhailov, V.O.; Parsons, T.; Simpson, R.W.; Timoshkina, E.P.; Williams, C.

2007-01-01

Data on present-day heat flow, subsidence history, and paleotemperature for the Sacramento Delta region, California, have been employed to constrain a numerical model of tectonic subsidence and thermal evolution of forearc basins. The model assumes an oceanic basement with an initial thermal profile dependent on its age subjected to refrigeration caused by a subducting slab. Subsidence in the Sacramento Delta region appears to be close to that expected for a forearc basin underlain by normal oceanic lithosphere of age 150 Ma, demonstrating that effects from both the initial thermal profile and the subduction process are necessary and sufficient. Subsidence at the eastern and northern borders of the Sacramento Valley is considerably less, approximating subsidence expected from the dynamics of the subduction zone alone. These results, together with other geophysical data, show that Sacramento Delta lithosphere, being thinner and having undergone deeper subsidence, must differ from lithosphere of the transitional type under other parts of the Sacramento Valley. Thermal modeling allows evaluation of the rheological properties of the lithosphere. Strength diagrams based on our thermal model show that, even under relatively slow deformation (10−17 s−1), the upper part of the delta crystalline crust (down to 20–22 km) can fail in brittle fashion, which is in agreement with deeper earthquake occurrence. Hypocentral depths of earthquakes under the Sacramento Delta region extend to nearly 20 km, whereas, in the Coast Ranges to the west, depths are typically less than 12–15 km. The greater width of the seismogenic zone in this area raises the possibility that, for fault segments of comparable length, earthquakes of somewhat greater magnitude might occur than in the Coast Ranges to the west.

Deep electrical resistivity structure of northwestern Costa Rica

NASA Astrophysics Data System (ADS)

Brasse, H.; Kapinos, G.; Mütschard, L.; Alvarado, G. E.; Worzewski, T.; Jegen, M.

2009-01-01

First long-period magnetotelluric investigations were conducted in early 2008 in northwestern Costa Rica, along a profile that extends from the coast of the Pacific Ocean, traverses the volcanic arc and ends currently at the Nicaraguan border. The aim of this study is to gain insight into the electrical resistivity structure and thus fluid distribution at the continental margin where the Cocos plate subducts beneath the Caribbean plate. Preliminary two-dimensional models map the only moderately resistive mafic/ultramafic complexes of the Nicoya Peninsula (resistivity of a few hundred Ωm), the conductive forearc and the backarc basins (several Ωm). Beneath the backarc basin the data image a poor conductor in the basement with a clear termination in the south, which may tentatively be interpreted as the Santa Elena Suture. The volcanic arc shows no pronounced anomaly at depth, but a moderate conductor underlies the backarc with a possible connection to the upper mantle. A conductor at deep-crustal levels in the forearc may reflect fluid release from the downgoing slab.

First constraints on the timing of the Ecuadorian Coastal Cordillera uplift and geodynamic implications

NASA Astrophysics Data System (ADS)

Vacherat, Arnaud; Brichau, Stéphanie; Reyes, Pedro; Michaud, François; Proust, Jean-Noël; Hernandez, Maria Jose

2017-04-01

The Carnegie Ridge subduction beneath the South American plate is currently considered as responsible for the acceleration of the northward escape of the North Andean Block, for the opening of the Guayaquil Gulf, and for the uplift of the coastal forearc domain of western Ecuador, since at least Late Pleistocene. However, the exact timing and amount of uplift of the coastal forearc domain and its Coastal Cordillera is poorly known. In this study, we provide the first detrital apatite (U-Th-Sm)/He (AHe) and zircon U/Pb ages from the coastal domain in order to constrain the thermal history of both the Coastal Cordillera and its foreland basin. Our preliminary results indicate that the Middle-Late Miocene Angostura Fm was buried during Late Miocene, recording high enough temperatures to partially reset AHe ages. We show that the basin then records 1 km of uplift associated to erosion and cooling since Early Pliocene ( 5 Ma).

The Pliocene-Pleistocene sedimentary tectonic history of NW California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, L.; Moley, K.; Aalto, K.R.

1993-04-01

A thick sequence of Late Miocene to Pleistocene sediments thought to represent deposition in a Neogene forearc basin are preserved in the structural basin referred to as the Eel River basin' located offshore of NW California and SE Oregon. The southern portion of this structural basin comes on land in the vicinity of Eureka where the marine and fluvial Wildcat Group is exposed. Basal Wildcat Group sediments are fluvial and littorial. Marine sandstones of the Wildcat Group contain K-spar concentrations of 5.5% and are believed to represent a fresh source. [sup 40]Ar/[sup 39]Ar laser probe analyses of Wildcat Group micasmore » yield dates of 52--57, 66--75, 128.5 and 299--303 Ma. The presence of Idaho detritus throughout the Neogene Wildcat Group indicates that the Klamath Mountains remained low during the Pliocene and early Pleistocene. Younger fluvial sediments in this region contain primarily locally derived detritus indicating local uplift of the Klamath Mountains. To the north, at Crescent City, thin remnants of the near-shore Saint George Formation and the eastern estuarine and fluvial Wimer Formation are lowermost Pliocene in age (5 ma). The presence of the highly erodible Wilmer Formation on uplifted plateaus in an area of extreme rainfall suggest that these sediments represent only the lowermost portion of an originally much thicker sequence. Consequently, the sediments confined to the present day Eel River basin do not represent the lateral extent of the original forearc basin. Sandstones and conglomerates of the Saint George and Wimer Formation indicate a local Klamath provenance derivation.« less

The Nahuel Niyeu basin: A Cambrian forearc basin in the eastern North Patagonian Massif

NASA Astrophysics Data System (ADS)

Greco, Gerson A.; González, Santiago N.; Sato, Ana M.; González, Pablo D.; Basei, Miguel A. S.; Llambías, Eduardo J.; Varela, Ricardo

2017-11-01

Early Paleozoic basement of the eastern North Patagonian Massif includes low- and high grade metamorphic units, which consist mainly of alternating paraderived metamorphic rocks (mostly derived from siliciclastic protoliths) with minor intercalations of orthoderived metamorphic rocks. In this contribution we provide a better understanding of the tectonic setting in which the protoliths of these units were formed, which adds to an earlier suggested idea. With this purpose, we studied the metasedimentary rocks of the low-grade Nahuel Niyeu Formation from the Aguada Cecilio area combining mapping and petrographic analysis with U-Pb geochronology and characterization of detrital zircon grains. The results and interpretations of this unit, together with published geological, geochronological and geochemical information, allow us to interpret the sedimentary and igneous protoliths of all metamorphic units from the massif as formed in a forearc basin at ∼520-510 Ma (Nahuel Niyeu basin). It probably was elongated in the ∼NW-SE direction, and would have received detritus from a proximal source area situated toward its northeastern side (present coordinates). The basin might be related to an extensional tectonic regime. Most likely source rocks were: (1) 520-510 Ma, acidic volcanic rocks (an active magmatic arc), (2) ∼555->520 Ma, acidic plutonic and volcanic rocks (earlier stages of the same arc), and (3) latest Ediacaran-Terreneuvian, paraderived metamorphic rocks (country rocks of the arc). We evaluate the Nahuel Niyeu basin considering the eastern North Patagonian Massif as an autochthonous part of South America, adding to the discussion of the origin of Patagonia.

The Ophiolite Problem, Is It Really a Problem?

NASA Astrophysics Data System (ADS)

Casey, J. F.; Dewey, J. F.

2009-12-01

Ophiolites and ophiolite complexes have been recognized as having an oceanic affinity or origin since the classic work of Ian Gass in the 1950’s on the Troodos Complex. A problem has been that the term ophiolite has included a very diverse range of meanings from obscure slivers of mafic and ultramafic rocks of doubtful origin in orogenic belts to large obducted slabs with the full range (Coleman, 1972), from base to top, of lherzolite/ariegite, harzburgite, dunite, gabbro, sheeted dyke complex, pillow basalts, and sediments, commonly with a two-pyroxene mafic granulite as a thin aureole attached to the base of the complex. Large obducted ophiolite slabs are mainly early Ordovician and mid-Cretaceous. The principal enigma of these obducted slabs is that they clearly must have been generated by some form of organized sea-floor spreading/plate-accretion, such as may be envisioned for the oceanic ridges, yet the volcanics commonly have arc affinity (Miyashiro) with boninites (high-temperature/low-pressure, high Mg and Si andesites), which suggest a forearc origin. Our model hinges on the PT conditions under which boninites form. Many ophiolites have complexly-deformed associated assemblages that suggest fracture zone/transform geology, which in turn has led to models involving the nucleation of subduction zones on fracture zones/transforms. Hitherto, arc-related sea-floor-spreading has been considered to be either pre-arc (fore-arc boninites) or post-arc (classic Karig-style back arc basins that split arcs). We propose a new model with syn-arc boninites that involves a stable ridge/trench/trench triple junction, the ridge being between the two upper plates. The direction of subduction must be oblique with a different sense in the two subduction zones and the oblique subduction cannot be partitioned into trench orthogonal and parallel strike-slip components. As the ridge spreads, new oceanic lithosphere is created within the forearc, the arc and fore-arc lengthen significantly, and a syn-arc ophiolite complex is generated that ages along arc-strike; a distinctive diachronous boninite/arc volcanic stratigraphy develops. Dikes in the ophiolite are oblique to the trench as are magnetic anomalies in the “back-arc” basin. Boninites and high-mg andesites are generated in the fore-arc under the aqueous, low pressure/high temperature, regime at the ridge above the dehydrating slab or where a ridge subducts beneath the forearc. The mafic protolith, garnet/two pyroxene, aureole is generated in and sliced from the subducting slab and attached to the base of the overriding lithosphere at about 1000°C, ten to twelve million years from the ridge axis, where the SSZ ophiolite is about ten to twelve kilometers thick, at which thickness of the ophiolite is buffered by the subducting slab. Obduction of the SSZ ophiolite with its subjacent aureole occurs whenever the oceanic arc attempts subduction of a stable continental margin.

Subduction zone decoupling/retreat modeling explains south Tibet (Xigaze) and other supra-subduction zone ophiolites and their UHP mineral phases

NASA Astrophysics Data System (ADS)

Butler, Jared P.; Beaumont, Christopher

2017-04-01

The plate tectonic setting in which proto-ophiolite 'oceanic' lithosphere is created remains controversial with a number of environments suggested. Recent opinions tend to coalesce around supra-subduction zone (SSZ) forearc extension, with a popular conceptual model in which the proto-ophiolite forms during foundering of oceanic lithosphere at the time of spontaneous or induced onset of subduction. This mechanism is favored in intra-oceanic settings where the subducting lithosphere is old and the upper plate is young and thin. We investigate an alternative mechanism; namely, decoupling of the subducting oceanic lithosphere in the forearc of an active continental margin, followed by subduction zone (trench) retreat and creation of a forearc oceanic rift basin, containing proto-ophiolite lithosphere, between the continental margin and the retreating subduction zone. A template of 2D numerical model experiments examines the trade-off between strength of viscous coupling in the lithospheric subduction channel and net slab pull of the subducting lithosphere. Three tectonic styles are observed: 1) C, continuous subduction without forearc decoupling; 2) R, forearc decoupling followed by rapid subduction zone retreat; 3) B, breakoff of subducting lithosphere followed by re-initiation of subduction and in some cases, forearc decoupling (B-R). In one case (BA-B-R; where BA denotes backarc) subduction zone retreat follows backarc rifting. Subduction zone decoupling is analyzed using frictional-plastic yield theory and the Stefan solution for the separation of plates containing a viscous fluid. The numerical model results are used to explain the formation of Xigaze group ophiolites, southern Tibet, which formed in the Lhasa terrane forearc, likely following earlier subduction and not necessarily during subduction initiation. Either there was normal coupled subduction before subduction zone decoupling, or precursor slab breakoff, subduction re-initiation and then decoupling. Rapid deep upper-mantle circulation in the models during subduction zone retreat can exhume and emplace material in the forearc proto-ophiolite from as deep as the mantle transition zone, thereby explaining diamonds and other 10-15 GPa UHP phases in Tibetan ophiolites.

An IODP proposal to drill the Godzilla Megamullion as a step to Mohole

NASA Astrophysics Data System (ADS)

Ohara, Y.; Michibayashi, K.; Dick, H. J. B.; Snow, J. E.; Ono, S.

2017-12-01

The year 2017 represents the 60th anniversary of the "original" project Mohole, which was coined by Walter Munk in 1957. Although the project Mohole has not yet been realized, the hard-rock community is now striving hard to understand the upper mantle in a variety of ways. Firstly, the present-day project Mohole, M2M (Moho-to-Mantle) project, will move forward in this September, conducting multi-channel seismic profiling off Hawaii as a site survey. Oman Drilling Project has started last December, and the drilled cores are being described aboard D/V Chikyu from July, this year. Furthermore, the forearc M2M proposal to drill the Bonin Trench forearc mantle was submitted to IODP in April 2016. Being a part of these efforts, we are preparing an IODP proposal to drill the Godzilla Megamullion, the largest known oceanic core complex on the Earth, located in the Parece Vela Basin in the Philippine Sea. A significant fraction of the ocean floor is created in backarc basins, while there have been no single long core of backarc basin lower ocean crust, from which to understand the likely differences in magmatic evolution and crustal structure in this key setting. The opportunity to explore the formation of the backarc basin lower crust and upper mantle is, therefore, an important contribution to understanding the ocean basins. At the same time, a better understanding of the architecture of backarc basin lower crust and upper mantle will greatly aid in the interpretation of the results of ophiolite study, since much of our understanding of the architecture of oceanic lower crust and upper mantle comes from ophiolites, most of which are thought to have at least some arc and/or backarc component. The Godzilla Megamullion is unique in its huge size as well as its development in a backarc basin, a rare tectonic window to study backarc basin lithosphere. The Godzilla Megamullion is prepared for full drilling proposal, with complete bathymetric data, multiple bottom samplings, and multi-channel seismic profilings as well as P-wave velocity structures. We will propose substantial riserless drilling at Godzilla Megamullion that will provide an excellent opportunity to understand backarc basin lower crust and upper mantle. In this contribution, we will make use of this opportunity to share the general scheme of the proposal with the community.

Crustal structure of the Sunda-Banda arc transition: results from marine geophysical investigations offshore eastern Indonesia

NASA Astrophysics Data System (ADS)

Planert, L.; Shulgin, A.; Kopp, H.; Lueschen, E.; Mueller, C.; Flueh, E.; Djajadihardja, Y.; Engels, M.

2009-04-01

The Sunda-Banda arc transition, the easternmost portion of the Indonesian convergent margin, presents a probably unique natural laboratory to study lower plate variability and related upper plate deformation in the so-called ‘subduction factory' for a deeper understanding of forearc evolution. In neighboring margin segments, we can observe strong changes of the incoming plate (transition from an oceanic to a continental lower plate, increasing plate age to the East, presence/absence of an oceanic plateau, variability in plate roughness) as well as a wide range of corresponding forearc structures, including large sedimentary basins and an accretionary prism/outer arc high of variable size and shape. During RV Sonne cruise SO190 in 2006 (SINDBAD: Seismic and Geoacoustic Investigations along the Sunda-Banda Arc Transition), we acquired a combination of seismic wide-angle OBH/OBS refraction, multichannel streamer and gravity data in order to study the seismic velocity structure of the subducting crust and the overriding island arc along a number of trench normal corridors located between 113°E and 121°E. Additionally, a number of trench parallel profiles were conducted which mainly focus on the internal structure of the large sedimentary basins and which were also intended for further clarifying the type of underlying forearc crust and mantle respectively. We used a tomographic approach for refracted and reflected phases to obtain seismic velocity models which again were used for prestack depth-migration of the MCS data. In turn, we incorporated the highly resolved sedimentary portions as a priori structure in our tomography. The results show the seismic velocity structure of the incoming plate, starting 100 km seaward of the trench, and the adjoining forearc down to depths of 20-28 km, i.e. well into the upper mantle, and at the same time fit the gravity data very well, using simple velocity-density relations. In the Argo abyssal plain, the models show 8.0-8.5 km thick oceanic crust. The velocities in the crust and uppermost mantle are reduced within distances of ~50 km seaward of the trench, which coincides with the onset of normal faulting on the incoming oceanic plate. Anomalously low mantle velocities of 7.5 km/s directly beneath the Moho are possibly due to the intrusion of seawater and subsequent serpentinisation of mantle peridotite. Landward of the trench in the outer arc high, velocities do not exceed 5.5 km/s down to the top of the subducting slab, which can be traced over ~70 km length beneath the forearc down to ~13 km depth. The plate boundary is of irregular shape, obviously imprinted by the complex deformation of the oceanic basement prior to subduction, which is further amplified as response to thrusting/downbending of the dissected oceanic blocks. Offshore Lombok island, our models reveal the geometry of the Lombok basin as well as the forearc Moho in ~16 km depth. Reduced upper mantle velocities suggest a hydrated shallow mantle wedge for this corridor. Further east offshore Sumba island, where the Java trench terminates and the transition to the collisional regime further east occurs, our models show a subducting oceanic plate of similar thickness and structure. But different to the situation offshore Lombok, we find no evidence for a shallow mantle wedge beneath the forearc; crustal-type velocities are found down to depths of ~20 km. The different forearc regime is most likely related to the collision with the Sumba block. Our results give a detailed view into the complex structure in both the deeper and shallower portions of this convergent margin.

Rapid subsidence along the Kerama Gap on the Ryukyu Arc, northwestern Pacific

NASA Astrophysics Data System (ADS)

Arai, K.; Inoue, T.; Sato, T.

2017-12-01

The Ryukyu Arc, which extend for over 1200 km along the east coast of Asia from Kyushu to Taiwan, and the associated Ryukyu Trench, are products of the subduction of the Philippine Sea Plate beneath the Eurasian Plate. The Okinawa Trough, a back-arc basin located landward of the Ryukyu Arc, formed in the Late Miocene (Gungor et al., 2012) or the Late Pliocene-Early Pleistocene (Sibuet et al., 1998); its formation is a key geologic event associated with complex tectonic movements and changes in the topographic configuration of the Ryukyu Arc. Geological Survey of Japan (GSJ), AIST has started the marine geological mapping project around the Ryukyu Arc since the 2008 FY. Multi channel (16 ch) high-resolution seismic profiles were acquired during these cruises by the GI-gun (355cu. inch) or the Cluster-gun (30+30 cu. inch) systems. Our survey area around the Okinawa Island is characterized by the shelf, upper forearc slope and slope to the back-arc basin. Seismic reflections of shelf and the upper forearc slope show a distinct reflector which may represent erosional unconformable surface. The distinct reflector had mainly tilted southeastward and was overlain by the stratified sediments. No obvious deformation such as the fold and faults parallel to the Ryukyu Trench axis was found under the upper forearc slope. In contrast, some active faults which were perpendicular to the Ryukyu Trench axis (NW-SE direction) were observed. The most conspicuous normal faults system under the Kerama Gap located on southwest off the Okinawa Island is formed. We will present the seismic profiles around the Kerama Gap. Seismic profiles show a distinct, irregularly undulated reflector as an acoustic basement around the Kerama Gap. The acoustic basement is overlain by the clear stratified sediments. Many normal faults developed NW-SE direction cut the stratified sediments and are deformed the subsurface along the Kerama Gap. Subsidence of the Kerama Gap resulted from large vertical downthrows of NW-SE trending normal faults.

Seismic images of the sliver strike-slip fault and back thrust in the Andaman-Nicobar region

NASA Astrophysics Data System (ADS)

Singh, Satish C.; Moeremans, Raphaele; McArdle, Jo; Johansen, Kjell

2013-10-01

sliver strike-slip Great Sumatra Fault (GSF) traverses mainland Sumatra from the Sunda Strait in the southeast to Banda Aceh in the northwest, and defines the present day plate boundary between the Sunda Plate in the north and the Burmese Sliver Plate in the south. It has been well studied on mainland Sumatra but poorly north of Banda Aceh in the Andaman Sea. Here we present deep seismic reflection images along the northward extension of the GSF over 700 km until it joins the Andaman Sea Spreading Centre, and we interpret these images in the light of earthquake, gravity, and bathymetry data. We find that the GSF has two strands between Banda Aceh and Nicobar Island: a transpression in the south and a deep narrow active rift system in the north, dotted with volcanoes in the center, suggesting that the volcanic arc is coincident with rifting. Farther north of Nicobar Island, an active strike-slip fault, the Andaman-Nicobar Fault, cuts through a rifted deep basin until its intersection with the Andaman Sea Spreading Centre. The volcanic arc lies just east of the rift basin. The western margin of this basin seems to be a rifted continental margin, tilted westward, and flooring the Andaman-Nicobar fore-arc basin. The Andaman-Nicobar fore-arc basin is bounded in the west by back thrusts similar to the West Andaman and Mentawai faults. The cluster of seismicity after the 2004 great Andaman-Sumatra earthquake just north of Nicobar Island coincides with the intersection of two strike-slip fault systems.

IODP Expedition 338: NanTroSEIZE Stage 3: NanTroSEIZE plate boundary deep riser 2

NASA Astrophysics Data System (ADS)

Moore, G. F.; Kanagawa, K.; Strasser, M.; Dugan, B.; Maeda, L.; Toczko, S.

2014-01-01

The Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) is designed to investigate fault mechanics and seismogenesis along a subduction megathrust, with objectives that include characterizing fault slip, strain accumulation, fault and wall rock composition, fault architecture, and state variables throughout an active plate boundary system. Integrated Ocean Drilling Program (IODP) Expedition 338 was planned to extend and case riser Hole C0002F from 856 to 3600 meters below the seafloor (m b.s.f.). Riser operations extended the hole to 2005.5 m b.s.f., collecting logging-while-drilling (LWD) and measurement-while-drilling, mud gas, and cuttings data. Results reveal two lithologic units within the inner wedge of the accretionary prism that are separated by a prominent fault zone at ~ 1640 m b.s.f. Due to damage to the riser during unfavorable winds and strong currents, riser operations were suspended, and Hole C0002F left for re-entry during future riser drilling operations. Contingency riserless operations included coring at the forearc basin site (C0002) and at two slope basin sites (C0021 and C0022), and LWD at one input site (C0012) and at three slope basin sites (C0018, C0021 and C0022). Cores and logs from these sites comprehensively characterize the alteration stage of the oceanic basement input to the subduction zone, the early stage of Kumano Basin evolution, gas hydrates in the forearc basin, and recent activity of the shallow megasplay fault zone system and associated submarine landslides.

Post-magmatic tectonic deformation of the outer Izu-Bonin-Mariana forearc system: initial results of IODP Expedition 352

NASA Astrophysics Data System (ADS)

Kurz, Walter; Ferré, Eric C.; Robertson, Alastair; Avery, Aaron; Christeson, Gail L.; Morgan, Sally; Kutterorf, Steffen; Sager, William W.; Carvallo, Claire; Shervais, John; Party IODP Expedition 352, Scientific

2015-04-01

IODP Expedition 352 was designed to drill through the entire volcanic sequence of the Bonin forearc. Four sites were drilled, two on the outer fore arc and two on the upper trench slope. Site survey seismic data, combined with borehole data, indicate that tectonic deformation in the outer IBM fore arc is mainly post-magmatic. Post-magmatic extension resulted in the formation of asymmetric sedimentary basins such as, for example, the half-grabens at sites 352-U1439 and 352-U1442 located on the upper trench slope. Along their eastern margins these basins are bounded by west-dipping normal faults. Sedimentation was mainly syn-tectonic. The lowermost sequence of the sedimentary units was tilted eastward by ~20°. These tilted bedding planes were subsequently covered by sub-horizontally deposited sedimentary beds. Based on biostratigraphic constraints, the minimum age of the oldest sediments is ~ 35 Ma; the timing of the sedimentary unconformities lies between ~ 27 and 32 Ma. At sites 352-U1440 and 352-U1441, located on the outer forearc, post-magmatic deformation resulted mainly in strike-slip faults possibly bounding the sedimentary basins. The sedimentary units within these basins were not significantly affected by post-sedimentary tectonic tilting. Biostratigraphic ages indicate that the minimum age of the basement-cover contact lies between ~29.5 and 32 Ma. Overall, the post-magmatic tectonic structures observed during Expedition 352 reveal a multiphase tectonic evolution of the outer IBM fore arc. At sites 352-U1439 and 352-U1442, shear with dominant reverse to oblique reverse displacement was localized along distinct subhorizontal cataclastic shear zones as well as steeply dipping slickensides and shear fractures. These structures, forming within a contractional tectonic regime, were either re-activated as or cross-cut by normal-faults as well as strike-slip faults. Extension was also accommodated by steeply dipping to subvertical mineralized veins and extensional fractures. Faults observed at sites 352-U1440 and 352-U1441 show mainly strike-slip. The sediments overlying the igneous basement, of maximum Late Eocene to Recent age, document ash and aeolian input, together with mass wasting of the fault-bounded sediment ponds.

Publications - PIR 2014-5 | Alaska Division of Geological & Geophysical

Science.gov Websites

the Iniskin Peninsula: Implications for the kinematic history of the Bruin Bay fault system, lower Iniskin Peninsula: Implications for the kinematic history of the Bruin Bay fault system, lower Cook Inlet (3.0 M) Keywords Bruin Bay Fault; Chinitna Bay; Faults; Folds; Forearc Basin; Geologic Map; Iniskin Bay

Neogene stratigraphy and Andean geodynamics of southern Ecuador

NASA Astrophysics Data System (ADS)

Hungerbühler, Dominik; Steinmann, Michael; Winkler, Wilfried; Seward, Diane; Egüez, Arturo; Peterson, Dawn E.; Helg, Urs; Hammer, Cliff

2002-01-01

The present paper reviews Tertiary volcanic and sedimentary formations in the Inter-Andean region of southern Ecuador (between 2°S and 4°20'S) in order to develop a geodynamic model of the region. The formations occur in the southern shallow prolongation of the Inter-Andean Valley between the Cordillera Real to the east, and the Cordillera Occidental and Amotape-Tahuín Provinces to the west. One hundred fifty zircon fission-track analyses has established a detailed chronostratigraphy for the sedimentary and volcanic formations and several small intrusions. The Paleogene to early Miocene formations are dominated by intermediate and acidic volcanic and pyroclastic rocks. In addition, relics of Eocene continental sedimentary series have been identified. The Neogene sedimentary series lie unconformably on deformed and eroded metamorphic, sedimentary and volcanic formations. They were deposited in two stages, which are separated by a major unconformity dated at ≈10-9 Ma. (1) During the middle and early late Miocene (≈15-10 Ma) marginal marine deltaic, lagoonal, lacustrine and fluvial environments prevailed, which we group under the heading "Pacific Coastal sequences". They presumably covered a greater surface area in southern Ecuador than their present occurrence in small topographic depressions. We suggest that they were deposited in the shallow marine Cuenca and Loja Embayments. Deposition in a marginal marine environment is also supported by the occurrence of brackish water ostracods and other fauna. (2) Above the regional (angular) unconformity, the coastal facies are overlain by late Miocene (≈9-5 Ma) continental alluvial fan and fluvial facies which are in turn covered by mainly airborne volcanic material. They represent the "Intermontane sequences" of the basins of Cuenca, Girón-Santa Isabel, Nabón, Loja and Malacatos-Vilcabamba. Sedimentologic and stratigraphic results are used to discuss the tectonic setting of Neogene sedimentation in the forearc and arc domain of the Ecuadorian subduction system. During the Pacific Coastal stage, northward displacement of the coastal forearc block along the Calacali-Pallatanga fault zone has driven crustal collapse in the Inter-Andean region. As a result, extensional subsidence drove the eastward ingression of shallow seas into the Cuenca and Loja Embayments from the Manabí and Progreso Basins to the west. Tectonic inversion in the forearc area during the early late Miocene (at ≈9.5 Ma) reflects the initiation of W-E oriented compression and uplift in the Inter-Andean region and the establishment of smaller Intermontane stage basins, which host the continental sequences. Coeval topographic rise of the Cordillera Occidental is indicated by the onset of clastic input from the west. The small Intermontane Basin of Nabón (≈8.5-7.9 Ma) formed during the period of maximum compression. The present data prove that the Neogene Andean forearc and arc area in southern Ecuador was a site of important but variable tectonic activity, which was presumably driven by the collision and coupling of the Carnegie Ridge with the Ecuadorian margin since ≈15-9 Ma.

Location and extent of Tertiary structures in Cook Inlet Basin, Alaska, and mantle dynamics that focus deformation and subsidence

USGS Publications Warehouse

Haeussler, Peter J.; Saltus, Richard W.

2011-01-01

Subduction of the buoyant Yakutat microplate likely caused deformation to be focused preferentially in upper Cook Inlet. The upper Cook Inlet region has both the highest degree of shortening and the deepest part of the Neogene basin. This forearc region has a long-wavelength magnetic high, a large isostatic gravity low, high conductivity in the lower mantle, low p-wave velocity (Vp), and a high p-wave to shear-wave velocity ratio (Vp/Vs). These data suggest that fluids in the mantle wedge caused serpentinization of mafic rocks, which may, at least in part, contribute to the long-wavelength magnetic anomaly. This area lies adjacent to the subducting and buoyant Yakutat microplate slab. We suggest the buoyant Yakutat slab acts much like a squeegee to focus mantle-wedge fluid flow at the margins of the buoyant slab. Such lateral flow is consistent with observed shear-wave splitting directions. The additional fluid in the adjacent mantle wedge reduces the wedge viscosity and allows greater corner flow. This results in focused subsidence, deformation, and gravity anomalies in the forearc region.

LWD lithostratigraphy, physical properties and correlations across tectonic domains at the NanTroSEIZE drilling transect, Nankai Trough subduction zone, Japan

NASA Astrophysics Data System (ADS)

Tudge, J.; Webb, S. I.; Tobin, H. J.

2013-12-01

Since 2007 the Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) has drilled a total of 15 sites across the Nankai Trough subduction zone, including two sites on the incoming sediments of the Philippine Sea plate (PSP). Logging-while-drilling (LWD) data was acquired at 11 of these sites encompassing the forearc Kumano Basin, upper accretionary prism, toe region and input sites. Each of these tectonic domains is investigated for changes in physical properties and LWD characteristics, and this work fully integrates a large data set acquired over multiple years and IODP expeditions, most recently Expedition 338. Using the available logging-while-drilling data, primarily consisting of gamma ray, resistivity and sonic velocity, a log-based lithostratigraphy is developed at each site and integrated with the core, across the entire NanTroSEIZE transect. In addition to simple LWD characterization, the use of Iterative Non-hierarchical Cluster Analysis (INCA) on the sites with the full suite of LWD data clearly differentiates the unaltered forearc and slope basin sediments from the deformed sediments of the accretionary prism, suggesting the LWD is susceptible to the subtle changes in the physical properties between the tectonic domains. This differentiation is used to guide the development of tectonic-domain specific physical properties relationships. One of the most important physical property relationships between is the p-wave velocity and porosity. To fully characterize the character and properties of each tectonic domain we develop new velocity-porosity relationships for each domain found across the NanTroSEIZE transect. This allows the porosity of each domain to be characterized on the seismic scale and the resulting implications for porosity and pore pressure estimates across the plate interface fault zone.

Tertiary stratigraphy and basin evolution, southern Sabah (Malaysian Borneo)

NASA Astrophysics Data System (ADS)

Balaguru, Allagu; Nichols, Gary

2004-08-01

New mapping and dating of strata in the southern part of the Central Sabah Basin in northern Borneo has made it possible to revise the lithostratigraphy and chronostratigraphy of the area. The recognition in the field of an Early Miocene regional unconformity, which may be equivalent to the Deep Regional Unconformity recognised offshore, has allowed the development of a stratigraphic framework of groups and formations, which correspond to stages in the sedimentary basin development of the area. Below the Early Miocene unconformity lies ophiolitic basement, which is overlain by an accretionary complex of Eocene age and a late Paleogene deep water succession which formed in a fore-arc basin. The late Paleogene deposits underwent syn-depositional deformation, including the development of extensive melanges, all of which can be demonstrated to lie below the unconformity in this area. Some localised limestone deposition occurred during a period of uplift and erosion in the Early Miocene, following which there was an influx of clastic sediments deposited in delta and pro-deltaic environments in the Middle Miocene. These deltaic to shallow marine deposits are now recognised as forming two coarsening-upward successions, mapped as the Tanjong and Kapilit Formations. The total thickness of these two formations in the Central Sabah Basin amounts to 6000 m, only half of the previous estimates, although the total stratigraphic thickness of Cenozoic clastic strata in Sabah may be more than 20,000 m.

Evolution of a Permo-Triassic sedimentary melange, Grindstone terrane, east-central Oregon

USGS Publications Warehouse

Blome, C.D.; Nestell, M.K.

1991-01-01

Perceives the Grindstone rocks to be a sedimentary melange composed of Paleozoic limestone slide and slump blocks that became detached from a carbonate shelf fringing a volcanic knoll or edifice in Late Permian to Middle Triassic time and were intermixed with Permian and Triassic slope to basinal clastic and volcaniclastic rocks in a forearc basin setting. Paleogeographic affinities of the Grindstone limestone faunas and volcaniclastic debris in the limestone and clastic rocks all indicate deposition in promixity to an island-arc system near the North American craton. -from Authors

Segmentation of megathrust rupture zones from fore-arc deformation patterns over hundreds to millions of years, Arauco peninsula, Chile

NASA Astrophysics Data System (ADS)

Melnick, Daniel; Bookhagen, Bodo; Strecker, Manfred R.; Echtler, Helmut P.

2009-01-01

This work explores the control of fore-arc structure on segmentation of megathrust earthquake ruptures using coastal geomorphic markers. The Arauco-Nahuelbuta region at the south-central Chile margin constitutes an anomalous fore-arc sector in terms of topography, geology, and exhumation, located within the overlap between the Concepción and Valdivia megathrust segments. This boundary, however, is only based on ˜500 years of historical records. We integrate deformed marine terraces dated by cosmogenic nuclides, syntectonic sediments, published fission track data, seismic reflection profiles, and microseismicity to analyze this earthquake boundary over 102-106 years. Rapid exhumation of Nahuelbuta's dome-like core started at 4 ± 1.2 Ma, coeval with inversion of the adjacent Arauco basin resulting in emergence of the Arauco peninsula. Here, similarities between topography, spatiotemporal trends in fission track ages, Pliocene-Pleistocene growth strata, and folded marine terraces suggest that margin-parallel shortening has dominated since Pliocene time. This shortening likely results from translation of a fore-arc sliver or microplate, decoupled from South America by an intra-arc strike-slip fault. Microplate collision against a buttress leads to localized uplift at Arauco accrued by deep-seated reverse faults, as well as incipient oroclinal bending. The extent of the Valdivia segment, which ruptured last in 1960 with an Mw 9.5 event, equals the inferred microplate. We propose that mechanical homogeneity of the fore-arc microplate delimits the Valdivia segment and that a marked discontinuity in the continental basement at Arauco acts as an inhomogeneous barrier controlling nucleation and propagation of 1960-type ruptures. As microplate-related deformation occurs since the Pliocene, we propose that this earthquake boundary and the extent of the Valdivia segment are spatially stable seismotectonic features at million year scale.

Acoustic and gravity features of mud volcanoes along the seaward part of the Kumano forearc basin, Nankai region, central Japan

NASA Astrophysics Data System (ADS)

Asada, M.

2017-12-01

Mud volcanoes (MV) are geological features that are observed all over the world, especially along plate convergent margins. MVs bring fluid and sediment to the surface from depth. MVs around Japan are expected to transport of information from the shallow portions of the seismogenic zone. The Kumano forearc basin (FAB) in the Nankai region is the most studied area in Japan. It is bounded by a shelf on the north, and the Kumano Basin edge fault zone (KBEFZ) on the south. The Kumano FAB has 1-2 km of sediment and overlies the accretionary prism. There are at least 14 MVs in the Kumano Basin. Most of them are found over the northern basin floor, and at least one MV is at the KBEFZ. The MV at the KBEFZ is imaged on a 3D seismic data set as a small topographic feature on seafloor with a disrupted BSR below it. On high-resolution acoustic imagery, it is an 80 100m-high hill with a crater-like depression. It is characterized by a negative ph anomaly detected just above it. High-backscatter seafloor recognized around the MV suggests that harder seafloor exists in that area. To determine whether large subseafloor diapirs exist below active MVs, we try to detect the gravity contrast between the allochthonous materials and basin sediment. Gravity data were collected by research vessels over the area in 2012 2017. After corrections of drift and Etovos effects, absolute gravity, free-air and Bouguer gravity anomalies were calculated. The gravity data do not always show anomalies directly on MVs over the northern basin, thus suggesting that larger diapirs which have gravity contrast over a few milli-Gals do not exist below most of MVs in this basin. Instead, a large negative gravity anomaly is found at the northeastern end of the Kumano Basin. Localized positive anomalies exist along the KBEFZ in the area of theMV. The positive anomaly may suggest that an allochthonous high-density sediment body intrudes along the highly deformed, weak, fault zone.

Sandstone provenance and U-Pb ages of detrital zircons from Permian-Triassic forearc sediments within the Sukhothai Arc, northern Thailand: Record of volcanic-arc evolution in response to Paleo-Tethys subduction

NASA Astrophysics Data System (ADS)

Hara, Hidetoshi; Kunii, Miyuki; Miyake, Yoshihiro; Hisada, Ken-ichiro; Kamata, Yoshihito; Ueno, Katsumi; Kon, Yoshiaki; Kurihara, Toshiyuki; Ueda, Hayato; Assavapatchara, San; Treerotchananon, Anuwat; Charoentitirat, Thasinee; Charusiri, Punya

2017-09-01

Provenance analysis and U-Pb dating of detrital zircons in Permian-Triassic forearc sediments from the Sukhothai Arc in northern Thailand clarify the evolution of a missing arc system associated with Paleo-Tethys subduction. The turbidite-dominant formations within the forearc sediments include the Permian Ngao Group (Kiu Lom, Pha Huat, and Huai Thak formations), the Early to earliest Late Triassic Lampang Group (Phra That and Hong Hoi formations), and the Late Triassic Song Group (Pha Daeng and Wang Chin formations). The sandstones are quartzose in the Pha Huat, Huai Thak, and Wang Chin formations, and lithic wacke in the Kiu Lom, Phra That, Hong Hoi and Pha Daeng formations. The quartzose sandstones contain abundant quartz, felsic volcanic and plutonic fragments, whereas the lithic sandstones contain mainly basaltic to felsic volcanic fragments. The youngest single-grain (YSG) zircon U-Pb age generally approximates the depositional age in the study area, but in the case of the limestone-dominant Pha Huat Formation the YSG age is clearly older. On the other hand, the youngest cluster U-Pb age (YC1σ) represents the peak of igneous activity in the source area. Geological evidence, geochemical signatures, and the YC1σ ages of the sandstones have allowed us to reconstruct the Sukhothai arc evolution. The initial Sukhothai Arc (Late Carboniferous-Early Permian) developed as a continental island arc. Subsequently, there was general magmatic quiescence with minor I-type granitic activity during the Middle to early Late Permian. In the latest Permian to early Late Triassic, the Sukhothai Arc developed in tandem with Early to Middle Triassic I-type granitic activity, Middle to Late Triassic volcanism, evolution of an accretionary complex, and an abundant supply of sediments from the volcanic rocks to the trench through a forearc basin. Subsequently, the Sukhothai Arc became quiescent as the Paleo-Tethys closed after the Late Triassic. In addition, parts of sediments of supposed Devonian-Carboniferous age within the Sukhothai Arc were revised as the Triassic Lampang Group, and the Early Cretaceous Khorat Group.

The tectonic origin of the Western Transverse Ranges microplate, southern California: Sedimentologic evidence of rotation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, M.D.; Reed, W.E.

1993-04-01

Most workers currently working on the problem of Southern California tectonic history and development are in agreement that the Western Transverse Ranges are allochthonous. The major point of contention revolves around the question of the distance the various terranes have traveled and their point of origin. Two tectonic models have been developed over the years to explain the emplacement of the WTRM: (1) accretion of exotic, far-traveled terranes; or (2) rotation, possibly with a small amount of translation, of a native or locally-derived terrane. Both of these reconstructions rely heavily on paleomagnetic data, with minimal input from field studies ofmore » sediment provenance or depositional systems. Examination of published reconstructions and models reveals that each would require a totally different provenance for sediments, and radically divergent transport directions for these sediments. Thus, examination of Cretaceous sediments exposed in the Western Transverse Ranges provides an independent test of the models, and will contribute to the resolution of the controversy. Paleocurrent measurements from several different tectonic blocks all yield a northerly flow direction. Removal of approximately 90[degree] of clockwise rotation and 70 km of right-lateral slip would align these data with westerly flow indicators in Cretaceous conglomeratic fan deposits in the San Diego area. Analysis of point count data indicate a mixed provenance for these rocks, both the conglomerates, and the associated sandstone units. Data indicate mixed magmatic arc/recycled orogen, as well as dissected/transitional arc as the dominant provenance terranes. These data are consistent with deposition in a Cretaceous forearc basin, which, in the reconstruction, would have been located immediately west of the San Diego area. Tertiary rotation and right-lateral offset have slivered the margin, and transported the forearc basin northward, forming the present Western Transverse Ranges.« less

Sequence stratigraphy, tectonics and hydrocarbon trap geometries of Middle Tertiary strata in the southern San Joaquin Basin, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, S.; Hewlett, J.S.; Bazeley, W.J.M.

1996-01-01

Tectonic evolution of the southern San Joaquin basin exerted a fundamental control on Cenozoic sequence boundary development, reservoir, source and seal facies distribution, and hydrocarbon trap development. Spatial and temporal variations in Tertiary sequence architecture across the basin reflect differences in eastside versus westside basin-margin geometries and deformation histories. Deposition of Tertiary sequences initiated in a forearc basin setting, bounded on the east by a ramp-margin adjacent to the eroded Sierran arc complex and on the west by the imbricated accretionary wedge of the Coast Ranges thrust. The major stages of Cenozoic basin evolution are: (1) Episodic compressional folding andmore » thrusting associated with oblique convergence of the Farallon and North American plates (Late Cretaceous to Oligocene), (2) localized folding and onset of basin subsidence related to Pacific Plate reorganization, microplate formation and rotation (Oligocene to Early Miocene), (3) transtensional faulting, folding basin subsidence associated with initiation of the San Andreas transform and continued microplate rotation (Micocene to Pliocene), and (4) compressional folding, extensional and strike- slip faulting related to evolution of the Pacific-North American transform boundary (Plio- Pleistocene). Complex stratigraphic relationships within Eocene to Middle Miocene rocks provide examples of tectonic influences on sequence architecture. These include development of: (1) Tectonically enhanced sequence boundaries (Early Eocene base Domengine unconformity) and local mid-sequence angular unconformities, (2) westside-derived syntectonic [open quotes]lowstand[close quotes] systems (Yokut/Turitella Silt wedge and Leda Sand/Cymric/Salt Creek wedge), (3) regional seals associated with subsidence-related transgressions (Round Mountain Silt), and (4) combination traps formed by structural inversion of distal lowstand delta reservoirs (e.g. Coalinga East Extension field).« less

Sequence stratigraphy, tectonics and hydrocarbon trap geometries of Middle Tertiary strata in the southern San Joaquin Basin, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, S.; Hewlett, J.S.; Bazeley, W.J.M.

1996-12-31

Tectonic evolution of the southern San Joaquin basin exerted a fundamental control on Cenozoic sequence boundary development, reservoir, source and seal facies distribution, and hydrocarbon trap development. Spatial and temporal variations in Tertiary sequence architecture across the basin reflect differences in eastside versus westside basin-margin geometries and deformation histories. Deposition of Tertiary sequences initiated in a forearc basin setting, bounded on the east by a ramp-margin adjacent to the eroded Sierran arc complex and on the west by the imbricated accretionary wedge of the Coast Ranges thrust. The major stages of Cenozoic basin evolution are: (1) Episodic compressional folding andmore » thrusting associated with oblique convergence of the Farallon and North American plates (Late Cretaceous to Oligocene), (2) localized folding and onset of basin subsidence related to Pacific Plate reorganization, microplate formation and rotation (Oligocene to Early Miocene), (3) transtensional faulting, folding basin subsidence associated with initiation of the San Andreas transform and continued microplate rotation (Micocene to Pliocene), and (4) compressional folding, extensional and strike- slip faulting related to evolution of the Pacific-North American transform boundary (Plio- Pleistocene). Complex stratigraphic relationships within Eocene to Middle Miocene rocks provide examples of tectonic influences on sequence architecture. These include development of: (1) Tectonically enhanced sequence boundaries (Early Eocene base Domengine unconformity) and local mid-sequence angular unconformities, (2) westside-derived syntectonic {open_quotes}lowstand{close_quotes} systems (Yokut/Turitella Silt wedge and Leda Sand/Cymric/Salt Creek wedge), (3) regional seals associated with subsidence-related transgressions (Round Mountain Silt), and (4) combination traps formed by structural inversion of distal lowstand delta reservoirs (e.g. Coalinga East Extension field).« less

Linking Late Cretaceous to Eocene Tectonostratigraphy of the San Jacinto Fold Belt of NW Colombia With Caribbean Plateau Collision and Flat Subduction

NASA Astrophysics Data System (ADS)

Mora, J. Alejandro; Oncken, Onno; Le Breton, Eline; Ibánez-Mejia, Mauricio; Faccenna, Claudio; Veloza, Gabriel; Vélez, Vickye; de Freitas, Mario; Mesa, Andrés.

2017-11-01

Collision with and subduction of an oceanic plateau is a rare and transient process that usually leaves an indirect imprint only. Through a tectonostratigraphic analysis of pre-Oligocene sequences in the San Jacinto fold belt of northern Colombia, we show the Late Cretaceous to Eocene tectonic evolution of northwestern South America upon collision and ongoing subduction with the Caribbean Plate. We linked the deposition of four fore-arc basin sequences to specific collision/subduction stages and related their bounding unconformities to major tectonic episodes. The Upper Cretaceous Cansona sequence was deposited in a marine fore-arc setting in which the Caribbean Plate was being subducted beneath northwestern South America, producing contemporaneous magmatism in the present-day Lower Magdalena Valley basin. Coeval strike-slip faulting by the Romeral wrench fault system accommodated right-lateral displacement due to oblique convergence. In latest Cretaceous times, the Caribbean Plateau collided with South America marking a change to more terrestrially influenced marine environments characteristic of the upper Paleocene to lower Eocene San Cayetano sequence, also deposited in a fore-arc setting with an active volcanic arc. A lower to middle Eocene angular unconformity at the top of the San Cayetano sequence, the termination of the activity of the Romeral Fault System, and the cessation of arc magmatism are interpreted to indicate the onset of low-angle subduction of the thick and buoyant Caribbean Plateau beneath South America, which occurred between 56 and 43 Ma. Flat subduction of the plateau has continued to the present and would be the main cause of amagmatic post-Eocene deposition.

Eocene to Oligocene volcanism in the Mariana fore-arc and crustal melting

NASA Astrophysics Data System (ADS)

Hartman, B.; Reagan, M.; Hickey-Vargas, R.; Hanan, B.; Blichert-Toft, J.

2003-04-01

Recently collected volcanic rocks from the Mariana fore-arc islands of Saipan and Rota provide evidence that the genesis of silicic magmas in the IBM system involves extensive crustal melting. Rhyolites from the island of Saipan are unusually high in silica for an oceanic island arc setting. They also are unique in the Izu-Bonin-Mariana (IBM) system in that they erupted during the earliest stages of subduction (45--46 Ma), but have "mature arc" major element, trace element, and isotopic compositions. For example, the rhyolites have flat REE patterns and pronounced negative Nb anomalies. These trace element patterns are nearly identical to those Oligocene (36--32 Ma) "early arc" andesites and dacites on Saipan, Guam, and Rota. All of the aforementioned lavas also have similar 207Pb/204Pb and 208Pb/204Pb values that plot along a trend that stretches from West Philippine basin basalt compositions toward those Pacific siliceous sediments. In contrast, Eocene volcanic rocks from other locations in the IBM arc are basaltic to boninitic and have U-shaped REE patterns and small to nonexistent Nb anomalies. The Pb isotopic compositions of these samples are similar to Pacific basin volcanics and volcanogenic sediments. Mathematical modeling suggests that the Saipan rhyolites were most likely derived by partial melting of an arc-like amphibolite crust and not through crystal fractionation of a "protoarc" boninite series magma. The data and these modelings suggest that a piece of preexisting arc-like amphibolite crust was trapped in the Mariana fore-arc early in its evolution. The Saipan rhyolites were produced by melting this crust at relatively shallow depths.

Crustal structure and tectonic history of the Kermadec arc inferred from MANGO seismic refraction profiles

NASA Astrophysics Data System (ADS)

Bassett, D.; Kopp, H.; Sutherland, R.; Henrys, S.; Watts, A. B.; Timm, C.; Scherwath, M.; Grevemeyer, I.; de Ronde, C. E. J.

2016-12-01

We have analyzed three wide-angle seismic reflection and refraction profiles and applied spectral averaging techniques to regional grids of bathymetry and free-air gravity anomaly to place the first regional constraints on the crustal structure of the Kermadec arc. These observations are used to test contrasting tectonic models for an along-strike transition in margin structure, across which, 1) the remnant Lau-Colville and active Kermadec arc ridges narrow by >50%; 2) the backarc and forearc deepen by 1 km, and 3) the active volcanic arc is deflected west into the deepest known backarc basin. We use residual bathymetric anomalies to constrain the geometry of this boundary and propose the name Central Kermadec Discontinuity (CKD). North of the CKD, the buried Tonga Ridge occupies the forearc with VP 6.5-7.3 km s-1 and residual free-air gravity anomalies constrain its latitudinal extent (north of 30.5°S), width (110±20 km) and strike ( 005° south of 25°S). South of the CKD the forearc is structurally homogeneous down-dip with VP 5.7-7.3 km s-1. Lower crustal velocities are similar to the northern Kermadec forearc, but there is no seismic or gravimetric evidence for an extinct arc ridge within the forearc. In the Havre Trough backarc, crustal thickness south of the CKD is 8-9 km, which is up-to 4 km thinner than the northern Havre Trough and at least 1 km thinner than the southern Havre Trough. The northern Kermadec/Tonga arc preserves a substrate of the Eocene arc, the southern Kermadec forearc preserves Mesozoic forearc rocks accreted at the Gondwana margin, and the central Kermadec arc may have fomed in the Kupe Abyssal Plain. The oldest arc related rocks recovered north and south of the CKD are 52 Ma and 16.7 Ma respectively, and plate tectonic reconstruction suggest the Eocene arc was originally conjoined with the Three Kings Ridge. The separation of these ridges during the early Oligocene likely formed the CKD. In contrast to previous interpretations, we suggest that the first-order crustal thickness variations along the Kermadec arc were inherited from before the Neogene and reflect Mesozoic crustal structure, the Cenozoic evolution of the Tonga-Kermadec-Hikurangi margin, and along-strike variations in the duration of arc volcanism.

The Crotone Megalandslide, southern Italy: Architecture, timing and tectonic control.

PubMed

Zecchin, Massimo; Accaino, Flavio; Ceramicola, Silvia; Civile, Dario; Critelli, Salvatore; Da Lio, Cristina; Mangano, Giacomo; Prosser, Giacomo; Teatini, Pietro; Tosi, Luigi

2018-05-17

Large-scale submarine gravitational land movements involving even more than 1,000 m thick sedimentary successions are known as megalandslides. We prove the existence of large-scale gravitational phenomena off the Crotone Basin, a forearc basin located on the Ionian side of Calabria (southern Italy), by seismic, morpho-bathymetric and well data. Our study reveals that the Crotone Megalandslide started moving between Late Zanclean and Early Piacenzian and was triggered by a contractional tectonic event leading to the basin inversion. Seaward gliding of the megalandslide continued until roughly Late Gelasian, and then resumed since Middle Pleistocene with a modest rate. Interestingly, the onshore part of the basin does not show a gravity-driven deformation comparable to that observed in the marine area, and this peculiar evidence allows some speculations on the origin of the megalandslide.

He and Sr isotopic constraints on subduction contributions to Woodlark Basin volcanism, Solomon Islands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trull, T.W.; Kurz, M.D.; Perfit, M.R.

In order to assess the nature and spatial extent of subduction contributions to arc volcanism, Sr and He isotopic compositions are measured for dredged volcanic rocks from the Woodlark Basin in the western Pacific. {sup 87}Sr/{sup 86}Sr ratios increase geographically, from ocean ridge values (.7025-.7029) at the Woodlark Spreading Center to island arc ratios (.7035-.7039) in the Solomon Islands forearc, with intermediate values near the triple junction where the Woodlark Spreading Center subducts beneath the Solomon Islands. {sup 3}He/{sup 4}He ratios are also more radiogenic in the forearc (6.9 {plus minus} .2 R{sub a} at active Kavachi volcano) than alongmore » the spreading center, where values typical of major ocean ridges were found (8.2 - 9.3 R{sub a}). Very low {sup 3}He/{sup 4}He ratios occur in many triple junction rocks (.1 to 5 R{sub a}), but consideration of He isotopic differences between crushing and melting analyses suggests that the low ratios were caused by atmospheric (1 R{sub a}) and radiogenic ({approx} 0.2 R{sub a}) helium addition after eruption. Variations in unaltered, magnetic {sup 3}He/{sup 4}He, and {sup 87}Sr/{sup 86}Sr ratios are best explained by subduction-related fluid or silicate melt contributions to the magma source region, perhaps from ancient Pacific lithosphere. However, mantle volatiles dominate the generation of Woodlark Basin rocks despite extensive subduction in the region.« less

Eocene extension in Idaho generated massive sediment floods into Franciscan trench and into Tyee, Great Valley, and Green River basins

USGS Publications Warehouse

Dumitru, Trevor A.; Ernst, W.G.; Wright, James E.; Wooden, Joseph L.; Wells, Ray E.; Farmer, Lucia P.; Kent, Adam J.R.; Graham, Stephan A.

2013-01-01

The Franciscan Complex accretionary prism was assembled during an ∼165-m.y.-long period of subduction of Pacific Ocean plates beneath the western margin of the North American plate. In such fossil subduction complexes, it is generally difficult to reconstruct details of the accretion of continent-derived sediments and to evaluate the factors that controlled accretion. New detrital zircon U-Pb ages indicate that much of the major Coastal belt subunit of the Franciscan Complex represents a massive, relatively brief, surge of near-trench deposition and accretion during Eocene time (ca. 53–49 Ma). Sediments were sourced mainly from the distant Idaho Batholith region rather than the nearby Sierra Nevada. Idaho detritus also fed the Great Valley forearc basin of California (ca. 53–37 Ma), the Tyee forearc basin of coastal Oregon (49 to ca. 36 Ma), and the greater Green River lake basin of Wyoming (50–47 Ma). Plutonism in the Idaho Batholith spanned 98–53 Ma in a contractional setting; it was abruptly superseded by major extension in the Bitterroot, Anaconda, Clearwater, and Priest River metamorphic core complexes (53–40 Ma) and by major volcanism in the Challis volcanic field (51–43 Ma). This extensional tectonism apparently deformed and uplifted a broad region, shedding voluminous sediments toward depocenters to the west and southeast. In the Franciscan Coastal belt, the major increase in sediment input apparently triggered a pulse of massive accretion, a pulse ultimately controlled by continental tectonism far within the interior of the North American plate, rather than by some tectonic event along the plate boundary itself.

Structure and composition of the Southern Mariana Forearc: new observations and samples from Shinkai 6500 dive studies in 2010

NASA Astrophysics Data System (ADS)

Ohara, Y.; Reagan, M. K.; Ishizuka, O.; Stern, R. J.

2010-12-01

The 3000-km long Izu-Bonin-Mariana (IBM) Arc system is an outstanding example of an intraoceanic convergent plate margin, and has become the particular focus of Japanese and US efforts to understand the operation of the “Subduction Factory”. In 2006 and 2008, twelve DSV Shinkai 6500 dives (973-977 and 1091-1097) were performed during YK06-12 and YK08-08 Leg 2 cruises along the landward slope of the southern Mariana Trench. The goal was to sample the remaining early arc crust associated with subduction initiation in the IBM system and upper mantle exposed in the forearc in order to gain a clearer understanding of the structure and evolution of Mariana forearc crust and upper mantle. The fruitful results include the recovery of the entire suite of rocks associated with what could be termed a “supra-subduction zone ophiolite” that formed during subduction initiation. An important discovery is that MORB-like tholeiitic basalts crop out over large areas. These “fore-arc basalts” (FAB) underlie boninites and overlie diabasic and gabbroic rocks. Potential origins include eruption at a spreading center before subduction began or eruption during near-trench spreading after subduction began (Reagan et al., 2010, G3). Another important discovery is a region of active forearc rifting at the southern end of the Mariana arc, named SE Mariana Forearc Rift (SEMFR). The SEMFR was firstly mapped with HMR-1 sonar (Martinez et al., 2000, JGR). Two dives at SEMFR recovered less-depleted backarc related peridotites (at Dive 973; Michibayashi et al., 2009, G3), and fresh basalts and basaltic andesites with petrographic characteristics like backarc basin lavas (at Dive 1096; see Ribeiro et al., AGU FM 2010). Although our previous studies have produced a number of important new observations about the geology of the southern Mariana forearc, our understanding of the region is still primitive. We will be conducting another cruise (YK10-12) during late September, 2010 to tackle two important problems by in-situ dive operations using the Shinkai 6500 and deep-tow camera: (1) Increasing the sampling density along the southern Mariana forearc, thereby providing detail for the lithological map of subduction initiation sequences. A particular goal will be to obtain a more complete suite of gabbroic lithologies for better radiometric age control. (2) Increasing the sampling density in the SEMFR to gain a better understanding of this newly indentified active rift and the origin of its near-trench basalts. In this contribution, we will report the results of this cruise, synthesizing our current understanding of the structure and composition of the southern Mariana forearc.

Geologic map of the Washougal quadrangle, Clark County, Washington, and Multnomah County, Oregon

USGS Publications Warehouse

Evarts, Russell C.; O'Connor, Jim E.; Tolan, Terry L.

2013-01-01

The Washougal 7.5’ quadrangle spans the boundary between the Portland Basin and the Columbia River Gorge, approximately 30 km east of Portland, Oregon. The map area contains the westernmost portion of the Columbia River Gorge National Scenic area as well as the rapidly growing areas surrounding the Clark County, Washington, cities of Camas and Washougal. The Columbia River transects the map area, and two major tributaries, the Washougal River in Washington and the Sandy River in Oregon, also flow through the quadrangle. The Columbia, Washougal, and Sandy Rivers have all cut deep valleys through hilly uplands, exposing Oligocene volcanic bedrock in the north part of the map area and lava flows of the Miocene Columbia River Basalt Group in the western Columbia River Gorge. Elsewhere in the map area, these older rocks are buried beneath weakly consolidated to well-consolidated Neogene and younger basin-fill sedimentary rocks and Quaternary volcanic and sedimentary deposits. The Portland Basin is part of the Coastal Lowland that separates the Cascade Range from the Oregon Coast Range. The basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones. These fault zones are thought to reflect regional transpression, transtension, and dextral shear within the forearc in response to oblique subduction of the Pacific plate along the Cascadia Subduction Zone. The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone, which is probably an active structure. The nature of the corresponding northeastern margin of the basin is less clear, but a series of poorly defined and partially buried dextral extensional structures has been hypothesized from topography, microseismicity, potential-field anomalies, and reconnaissance geologic mapping. This map is a contribution to a program designed to improve the geologic database for the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. Updated, more detailed information on the bedrock and surficial geology of the basin and its surrounding area will facilitate improved assessments of seismic risk, and resource availability in this rapidly growing region.

Publications - PIR 2015-5 | Alaska Division of Geological & Geophysical

Science.gov Websites

superposition of strike-slip and reverse-slip faults in the Bruin Bay fault system, Ursus Head, lower Cook Inlet , Preliminary investigation of fracture populations in Mesozoic strata of the Cook Inlet forearc basin: Iniskin observations: Continued facies analysis of the Lower Jurassic Talkeetna Formation, north Chinitna Bay, Alaska

Sedimentary petrology and reservoir quality of the Middle Jurassic Red Glacier Formation, Cook Inlet forearc basin: Initial impressions

USGS Publications Warehouse

Helmold, K.P.; LePain, D.L.; Stanley, Richard G.

2016-01-01

The Division of Geological & Geophysical Surveys and Division of Oil & Gas are currently conducting a study of the hydrocarbon potential of Cook Inlet forearc basin (Gillis, 2013, 2014; LePain and others, 2013; Wartes, 2015; Herriott, 2016 [this volume]). The Middle Jurassic Tuxedni Group is recognized as a major source of oil in Tertiary reservoirs (Magoon, 1994), although the potential for Tuxedni reservoirs remains largely unknown. As part of this program, five days of the 2015 field season were spent examining outcrops, largely sandstones, of the Middle Jurassic Red Glacier Formation (Tuxedni Group) approximately 6.4 km northeast of Johnson Glacier on the western side of Cook Inlet (fig. 4-1). Three stratigraphic sections (fig. 4-2) totaling approximately 307 m in thickness were measured and described in detail (LePain and others, 2016 [this volume]). Samples were collected for a variety of analyses including palynology, Rock-Eval pyrolysis, vitrinite reflectance, detrital zircon geochronology, and petrology. This report summarizes our initial impressions of the petrology and reservoir quality of sandstones encountered in these measured sections. Interpretations are based largely on hand-lens observations of hand specimens and are augmented by stereomicroscope observations. Detailed petrographic (point-count) analyses and measurement of petrophysical properties (porosity, permeability, and grain density) are currently in progress.

Continuous depth profile of the rock strength in the Nankai accretionary prism based on drilling performance parameters.

PubMed

Hamada, Yohei; Kitamura, Manami; Yamada, Yasuhiro; Sanada, Yoshinori; Sugihara, Takamitsu; Saito, Saneatsu; Moe, Kyaw; Hirose, Takehiro

2018-02-14

A new method for evaluating the in situ rock strength beneath the seafloor is proposed and applied to the Nankai Trough accretionary prism. The depth-continuous in situ rock strength is a critical parameter for numerous studies in earth science, particularly for seismology and tectonics at plate convergence zones; yet, measurements are limited owing to a lack of drilled cores. Here, we propose a new indicator of strength, the equivalent strength (EST), which is determined only by drilling performance parameters such as drill string rotational torque, bit depth, and string rotational speed. A continuous depth profile of EST was drawn from 0 to 3000 m below the seafloor (mbsf) across the forearc basin and accretionary prism in the Nankai Trough. The EST did not show a significant increase around the forearc basin-accretionary prism boundary, but it did show a clear increase within the prism, ca. below 1500 mbsf. This result may indicate that even the shallow accretionary prism has been strengthened by horizontal compression derived from plate subduction. The EST is a potential parameter to continuously evaluate the in situ rock strength during drilling, and its accuracy of the absolute value can be improved by combining with laboratory drilling experiments.

Paleogeography and sedimentology of Upper Cretaceous turbidites, San Diego, California.

USGS Publications Warehouse

Nilsen, T.H.; Abbott, P.L.

1981-01-01

Upper Cretaceous (Campanian and Maestrichtian) marine strata of the Rosario Group in the San Diego area include the Point Loma Formation and overlying Cabrillo Formation. Thes units contain 6 facies associations which define a deep-sea fan deposited by westward-flowing sediment gravity flows that transported sediments derived chiefly from batholithic and pre-batholithic metamorphic rocks of the Peninsular Ranges. The sedimentary basin initially deepened abruptly. The fan then prograded westward into the basin, with a retrogradational phase recorded in the uppermost part of the sequence. The fan was deposited along the eastern edge of a forearc basin similar to that of the Great Valley sequence in northern California. The western part of the fan appears to have been truncated by late Cenozoic strike-slip faulting.-from Authors

Geologic Map of the Saint Helens Quadrangle, Columbia County, Oregon, and Clark and Cowlitz Counties, Washington

USGS Publications Warehouse

Evarts, Russell C.

2004-01-01

The Saint Helens 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 35 km north Portland, Oregon. The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Saint Helens quadrangle lies in the northern part of the Portland Basin, a roughly 2000-km2 topographic and structural depression. It is the northernmost of several sediment-filled structural basins that collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The rhomboidal basin is approximately 70 km long and 30 km wide, with its long dimension oriented northwest. The Columbia River flows west and north through the Portland Basin at an elevation near sea level and exits through a confined bedrock valley less than 2.5 km wide about 16 km north of Saint Helens. The flanks of the basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but contributions from streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction along the Cascadia Subduction Zone Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential fieldanomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure, the Kalama Structural Zone of Evarts (2002), may underlie the north-northwest-trending reach of the Columbia River north of Woodland (Blakely and others, 1995). This map is a contribution to a U.S. Geological Survey (USGS) program designed to improve the geologic database for the Portland Basin region of the Pacific Northwest urban corridor, the populated forearc region of western Washington and Oregon. Better and more detailed information on the bedrock and surficial geology of the basin and its surrounding area is needed to refine assessments of seismic risk (Yelin and Patton, 1991; Bott and Wong, 1993), ground-failure hazards (Madin and Wang, 1999; Wegmann and Walsh, 2001) and resource availability in this rapid

Active-source 3-D tomography near Nias and Batu Islands, offshore central Sumatra

NASA Astrophysics Data System (ADS)

Karplus, M.; Henstock, T.; McNeill, L. C.; Vermeesch, P. M.; Hall, T. R.; Harmon, N.; Barton, P. J.

2013-12-01

Wide-angle reflection and refraction tomography constrain 3-D lithospheric P-wave velocity structure beneath the central Sumatra subduction zone from Nias Island to Siberut, offshore Indonesia at the southern boundary of the 2005 megathrust earthquake rupture. This area includes the earthquake segment boundary near the Batu Islands where the Investigator Fracture Zone is subducted beneath the Eurasian plate. We report along- and across-strike variations in structure of the downgoing slab and overriding plate. Seismic wide-angle data were collected during cruise SO198-1 in May-June 2008. Air gun shots were recorded by 47 temporary ocean bottom seismometers (OBS) deployed in a roughly 200 km by 190 km area, 10 three-component long-term OBS (with differential pressure gauge), and 52 land stations. First arrival refraction modeling using ray tracing and least squares inversion has yielded a lithospheric P-wave velocity model, best-resolved in the top 25 km. We observe velocities of ~4.5-6 km/s within the accretionary prism, which varies by several km in its depth extent. The forearc basin is underlain by high velocities of ~7-8 km/s as shallow as 8 km depth. This high velocity region is likely older forearc oceanic crust, as seen in Cascadia and near Simeulue, offshore Sumatra. The top of the subducting slab ranges in depth from ~10 km near the trench to ~20 km beneath the prism. The top of the slab dips approximately 4-4.5° towards the NE between the trench and the prism. Earthquake hypocenters show the slab dip steepens significantly NE of the forearc basin. We compare our velocity models with models derived from other regions to the north and south along-strike in the Sumatra Subduction Zone, including the 2004-2005 segment boundary at Simeulue. Multi-channel seismic reflection data show that fault structures and reflectivity change considerably along- and across-strike in the central Sumatra subduction zone. Furthermore, regional earthquake locations indicate rupture segmentation along the plate boundary. The Nias segment in the north ruptured in the 2005 M8.7 earthquake. The weakly-coupled Batu segment experiences sporadic clusters of events near the break in the forearc slope. The offshore forearc west of Siberut is characterized by almost aseismic behavior, reflecting the locked state of the plate interface, which hasn't ruptured since the 1797 M8.6-8.8 earthquake. The subducting Investigator Fracture Zone is believed to act as a barrier for propagation of slip during large ruptures. We compare our velocity model with reflection data and rupture segments to characterize differences in the lower plate, upper plate, and plate boundary properties.

Continental Arcs as Both Carbon Source and Sink in Regulating Long Term Climate

NASA Astrophysics Data System (ADS)

Jiang, H.; Lee, C. T.

2017-12-01

The long-term variability of atmospheric pCO2 is determined by the balance between the rate of geologic inputs of CO­­2 (e.g., magmatic/metamorphic degassing, carbonate weathering) and the rate of carbonate precipitation driven by silicate weathering. The Late Cretaceous-Early Cenozoic was characterized by elevated atmospheric pCO2 and greenhouse climate, likely due to increased magmatic flux from mid-ocean ridges and, in particular, continental arcs. However, it has been suggested that continental arc magmatism is accompanied by rapid uplift and erosion due to magmatic/tectonic thickening of the crust, thus continental arcs likely enhance the chemical weathering flux, in turn increasing the carbon sink. To assess the contribution of continental arcs to global carbon inputs and sinks, we conducted a case study in the Cretaceous Peninsular Ranges batholith (PRB) and associated forearc basin in southern California, USA, representing one segment of the Cretaceous Cordillera arc-forearc system. Arc magmatism occurred between 170-85 Ma, peaking at 100 Ma, but erosion of the arc continues into the early Eocene, with forearc sediments representing this protracted arc unroofing. During magmatism, we estimate the CO2 degassing flux from the PRB was at least 5-25*105 mol·km-2·yr-1. By calculating the depletion of Ca and Mg in the forearc sediments relative to their arc protoliths, we estimate the silicate weathering/carbonate precipitation flux to be 106 mol·km-2·yr-1 during Late Cretaceous magmatism, decreasing to 105 mol·km-2·yr-1 by the Early Eocene. We show that during active continental arc magmatism, the CO2 degassing flux is comparable to CO2 consumption driven by silicate weathering in the arc. However, after magmatism ends, a regional imbalance arises in which the arc no longer contributes to CO2 inputs but continued silicate weathering of the arc drives carbonate precipitation such that the arc indirectly becomes CO2 sink. We propose that the development of continental arcs increases weatherability through mountain building processes, and therefore may affect the strength of the global negative feedback between silicate weathering and climate. Future studies are needed to quantify the variability in weathering feedback strength associated with global continental arc development.

Subsurface geometry and evolution of the Seattle fault zone and the Seattle Basin, Washington

USGS Publications Warehouse

ten Brink, Uri S.; Molzer, P.C.; Fisher, M.A.; Blakely, R.J.; Bucknam, R.C.; Parsons, T.; Crosson, R.S.; Creager, K.C.

2002-01-01

The Seattle fault, a large, seismically active, east-west-striking fault zone under Seattle, is the best-studied fault within the tectonically active Puget Lowland in western Washington, yet its subsurface geometry and evolution are not well constrained. We combine several analysis and modeling approaches to study the fault geometry and evolution, including depth-converted, deep-seismic-reflection images, P-wave-velocity field, gravity data, elastic modeling of shoreline uplift from a late Holocene earthquake, and kinematic fault restoration. We propose that the Seattle thrust or reverse fault is accompanied by a shallow, antithetic reverse fault that emerges south of the main fault. The wedge enclosed by the two faults is subject to an enhanced uplift, as indicated by the boxcar shape of the shoreline uplift from the last major earthquake on the fault zone. The Seattle Basin is interpreted as a flexural basin at the footwall of the Seattle fault zone. Basin stratigraphy and the regional tectonic history lead us to suggest that the Seattle fault zone initiated as a reverse fault during the middle Miocene, concurrently with changes in the regional stress field, to absorb some of the north-south shortening of the Cascadia forearc. Kingston Arch, 30 km north of the Seattle fault zone, is interpreted as a more recent disruption arising within the basin, probably due to the development of a blind reverse fault.

Dynamic Passage of Topography Beneath the Southern Costa Rica Forearc seen with Seismic Stratigraphy

NASA Astrophysics Data System (ADS)

Edwards, J. H.; Kluesner, J. W.; Silver, E. A.

2014-12-01

3D seismic reflection data (CRISP) collected across the southern Costa Rica margin reveals that a thick, deforming sedimentary wedge underlies the younger slope sediments (Silver et al., this meeting). The older wedge material and younger slope sediments are separated by a high-amplitude regional unconformity. Seismic stratigraphy of the sedimentary strata overlying this regional unconformity reflects a dynamic deformation history of the margin. The younger slope sediments contain series of more localized unconformities, separating sedimentary units as thick as 1 km that reveal a dynamically changing set of inverted, overlapping basins. The geometry of these overlapping, inverted basins indicate sequential uplift events. The direction of basin thickening varies upsection, and these basins are cut by both thrust and normal faults and are deformed by folding. Structural development appears to be controlled by relief on the subducting plate interface, which induces uplift and subsidence and thereby controls the pattern of erosion and deposition. We interpret the evolution of these inverted stratigraphic packages as forming from subducting topography. Correlating these seismic-stratigraphic packages to recent drilling based on preliminary magnetostratigraphy from IODP site U1413 (Expedition 344 Scientists, 2013), allows us to date the passage of the subducting plate topography beginning ~2 Ma.

Regional P wave velocity structure of the Northern Cascadia Subduction Zone

USGS Publications Warehouse

Ramachandran, K.; Hyndman, R.D.; Brocher, T.M.

2006-01-01

This paper presents the first regional three-dimensional, P wave velocity model for the Northern Cascadia Subduction. Zone (SW British Columbia and NW Washington State) constructed through tomographic inversion of first-arrival traveltime data from active source experiments together with earthquake traveltime data recorded at permanent stations. The velocity model images the structure of the subducting Juan de Fuca plate, megathrust, and the fore-arc crust and upper mantle. Beneath southern Vancouver Island the megathrust above the Juan de Fuca plate is characterized by a broad zone (25-35 km depth) having relatively low velocities of 6.4-6.6 km/s. This relative low velocity zone coincides with the location of most of the episodic tremors recently mapped beneath Vancouver Island, and its low velocity may also partially reflect the presence of trapped fluids and sheared lower crustal rocks. The rocks of the Olympic Subduction Complex are inferred to deform aseismically as evidenced by the lack of earthquakes withi the low-velocity rocks. The fore-arc upper mantle beneath the Strait of Georgia and Puget Sound is characterized by velocities of 7.2-7.6 km/s. Such low velocities represent regional serpentinization of the upper fore-arc mantle and provide evidence for slab dewatering and densification. Tertiary sedimentary basins in the Strait of Georgia and Puget Lowland imaged by the velocity model lie above the inferred region of slab dewatering and densification and may therefore partly result from a higher rate of slab sinking. In contrast, sedimentary basins in the Strait of Juan de Fuca lie in a synclinal depression in the Crescent Terrane. The correlation of in-slab earthquake hypocenters M>4 with P wave velocities greater than 7.8 km/s at the hypocenters suggests that they originate near the oceanic Moho of the subducting Juan de Fuca plate. Copyright 2006 by the American Geophysical Union.

Crustal evolution derived from the Izu-Bonin-Mariana arc velocity images

NASA Astrophysics Data System (ADS)

Takahashi, N.; Kodaira, S.; Tatsumi, Y.; Miura, S.; Sato, T.; Yamashita, M.; No, T.; Takahashi, T.; Noguchi, N.; Takizawa, K.; Kaiho, Y.; Kaneda, Y.

2010-12-01

The Izu-Bonin-Mariana arc is known as one of typical oceanic island arcs, which has developed by subduction between oceanic crusts producing continental materials. Japan Agency for Marine-Earth Science and Technology has carried out seismic surveys using a multi-channel reflection survey system (MCS) and ocean bottom seismographs (OBSs) in the Izu-Bonin-Mariana (IBM) arc since 2002, and reported these crustal images. As the results, we identified the structural characteristics of whole Izu-Bonin-Mariana arc. Rough structural characteristics are, 1) middle crust with Vp of 6 km/s, 2) upper part of the lower crust with Vp of 6.5-6.8 km/s, 3) lower part of the lower crust with Vp of 6.8-7.5 km/s, and 4) lower mantle velocity beneath the arc crusts. In addition, structural variation along the volcanic front, for example, thickness variation of andesitic layers was imaged and the distributions is consistent with those of rhyolite volcanoes, that is, it suggested that the cause the structural variation is various degree of crustal growth (Kodaira et al., 2007). Moreover, crustal thinning with high velocity lower crust across arc was also imaged, and it is interpreted that such crust has been influenced backarc opening (Takahashi et al., 2009). According to Tatsumi et al. (2008), andesitic middle crust is produced by differentiation of basaltic lower crust and a part of the restites are transformed to the upper mantle. This means that region showing much crustal differentiation has large volume of transformation of dense crustal materials to the mantle. We calculated volume profiles of the lower crust along all seismic lines based on the petrologic model, and compared them with observed real volumes obtained by seismic images. If the real volume of the lower crust is large, it means that the underplating of dense materials to the crustal bottom is dominant rather than transformation of dense materials to the upper mantle. According to obtained profiles to judge if the region is the transformation dominant or underplating, the transformation dominant regions are located along the volcanic front, the remnant arc for the incipient rifting like the Sumisu Rift just behind the volcanic front, rear arc regions, and fore-arc basins. Beneath the fore-arc basins, multiple rows showing transformation dominant distribute, and it extends from north to south around the Ogasawara Trough. On the other hand, the underplating dominant regions distribute between the volcanic front and the rear arc region, beneath the incipient rift, and between the multiple rows beneath the fore-arc basins. These locations showing underplating dominant are consistent with those with high velocity lower crust.

Philippine Sea Plate inception, evolution, and consumption with special emphasis on the early stages of Izu-Bonin-Mariana subduction

NASA Astrophysics Data System (ADS)

Lallemand, Serge

2016-12-01

We compiled the most relevant data acquired throughout the Philippine Sea Plate (PSP) from the early expeditions to the most recent. We also analyzed the various explanatory models in light of this updated dataset. The following main conclusions are discussed in this study. (1) The Izanagi slab detachment beneath the East Asia margin around 60-55 Ma likely triggered the Oki-Daito plume occurrence, Mesozoic proto-PSP splitting, shortening and then failure across the paleo-transform boundary between the proto-PSP and the Pacific Plate, Izu-Bonin-Mariana subduction initiation and ultimately PSP inception. (2) The initial splitting phase of the composite proto-PSP under the plume influence at ˜54-48 Ma led to the formation of the long-lived West Philippine Basin and short-lived oceanic basins, part of whose crust has been ambiguously called "fore-arc basalts" (FABs). (3) Shortening across the paleo-transform boundary evolved into thrusting within the Pacific Plate at ˜52-50 Ma, allowing it to subduct beneath the newly formed PSP, which was composed of an alternance of thick Mesozoic terranes and thin oceanic lithosphere. (4) The first magmas rising from the shallow mantle corner, after being hydrated by the subducting Pacific crust beneath the young oceanic crust near the upper plate spreading centers at ˜49-48 Ma were boninites. Both the so-called FABs and the boninites formed at a significant distance from the incipient trench, not in a fore-arc position as previously claimed. The magmas erupted for 15 m.y. in some places, probably near the intersections between back-arc spreading centers and the arc. (5) As the Pacific crust reached greater depths and the oceanic basins cooled and thickened at ˜44-45 Ma, the composition of the lavas evolved into high-Mg andesites and then arc tholeiites and calc-alkaline andesites. (6) Tectonic erosion processes removed about 150-200 km of frontal margin during the Neogene, consuming most or all of the Pacific ophiolite initially accreted to the PSP. The result was exposure of the FABs, boninites, and early volcanics that are near the trench today. (7) Serpentinite mud volcanoes observed in the Mariana fore-arc may have formed above the remnants of the paleo-transform boundary between the proto-PSP and the Pacific Plate.

Paleozoic and Lower Mesozoic magmas from the eastern Klamath Mountains (North California) and the geodynamic evolution of northwestern America

NASA Astrophysics Data System (ADS)

Lapierre, H.; Brouxel, M.; Albarede, F.; Coulin, C.; Lecuyer, C.; Martin, P.; Mascle, G.; Rouer, O.

1987-09-01

The Paleozoic to Early Mesozoic geology of the eastern Klamath Mountains (N California) is characterized by three major magmatic events of Ordovician, Late Ordovician to Early Devonian, and Permo-Triassic ages. The Ordovician event is represented by a calc-alkalic island-arc sequence (Lovers Leap Butte sequence) developed in the vicinity of a continental margin. The Late Ordovician to Early Devonian event consists of the 430-480 Ma old Trinity ophiolite formed during the early development of a marginal basin, and a series of low-K tholeiitic volcanic suites (Lovers Leap Basalt—Keratophyre unit, Copley and Balaklala Formations) belonging to intraoceanic island-arcs. Finally, the Permo-Triassic event gave rise to three successives phases of volcanic activity (Nosoni, Dekkas and Bully Hill) represented by the highly differentiated basalt-to-rhyolite low-K tholeiitic series of mature island-arcs. The Permo-Triassic sediments are indicative of shallow to moderate depth in an open, warm sea. The geodynamic evolution of the eastern Klamath Mountains during Paleozoic to Early Mesozoic times is therefore constrained by the geological, petrological and geochemical features of its island-arcs and related marginal basin. A consistent plate-tectonic model is proposed for the area, consisting of six main stages: (1) development during Ordovician times of a calc-alkalic island-arc in the vicinity of a continental margin; (2) extrusion during Late Ordovician to Silurian times of a primitive basalt-andesite intraoceanic island-arc suite, which terminated with boninites, the latter suggest rifting in the fore-arc, followed by the breakup of the arc; (3) opening and development of the Trinity back-arc basin around 430-480 Ma ago; (4) eruption of the Balaklala Rhyolite either in the arc or in the fore-arc, ending in Early Devonian time with intrusion of the 400 Ma Mule Mountain stock; (5) break in volcanic activity from the Early Devonian to the Early Permian; and (6) development of a mature island-arc from the Early Permian to the Late Triassic. The eastern Klamath Mountains island-arc formations and ophiolitic suite are part of the "Cordilleran suspect terranes", considered to be Gondwana margin fragments, that have undergone large northward translations before final collision with the North American craton during Late Mesozoic or Cenozoic times. These eastern Klamath Mountains island-arcs could be associated with the paleo-Pacific oceanic plate that led to accretion of these allochthonous terranes to the American margin.

Tectono-stratigraphy of the Orhaniye Basin, Turkey: Implications for collision chronology and Paleogene biogeography of central Anatolia

NASA Astrophysics Data System (ADS)

Licht, A.; Coster, P.; Ocakoğlu, F.; Campbell, C.; Métais, G.; Mulch, A.; Taylor, M.; Kappelman, John; Beard, K. Christopher

2017-08-01

Located along the İzmir-Ankara-Erzincan Suture (IAES), the Maastrichtian - Paleogene Orhaniye Basin has yielded a highly enigmatic -yet poorly dated- Paleogene mammal fauna, the endemic character of which has suggested high faunal provincialism associated with paleogeographic isolation of the Anatolian landmass during the early Cenozoic. Despite its biogeographic significance, the tectono-stratigraphic history of the Orhaniye Basin has been poorly documented. Here, we combine sedimentary, magnetostratigraphic, and geochronological data to infer the chronology and depositional history of the Orhaniye Basin. We then assess how our new data and interpretations for the Orhaniye Basin impact (1) the timing and mechanisms of seaway closure along the IAES and (2) the biogeographic evolution of Anatolia. Our results show that the Orhaniye Basin initially developed as a forearc basin during the Maastrichtian, before shifting to a retroarc foreland basin setting sometime between the early Paleocene and 44 Ma. This chronology supports a two-step scenario for the assemblage of the central Anatolian landmass, with incipient collision during the Paleocene - Early Eocene and final seaway retreat along the IAES during the earliest Late Eocene after the last marine incursion into the foreland basin. Our dating for the Orhaniye mammal fauna (44-43 Ma) indicates the persistence of faunal endemism in northern Anatolia until at least the late Lutetian despite the advanced stage of IAES closure. The tectonic evolution of dispersal corridors linking northern Anatolia with adjacent parts of Eurasia was not directly associated with IAES closure and consecutive uplifts, but rather with the build-up of continental bridges on the margins of Anatolia, in the Alpine and Tibetan-Himalayan orogens.

Northward migration of the Cascadia forearc in the northwestern U.S. and implications for subduction deformation

USGS Publications Warehouse

Wells, R.E.; Simpson, R.W.

2001-01-01

Geologic and paleomagnetic data from the Cascadia forearc indicate long-term northward migration and clockwise rotation of an Oregon coastal block with respect to North America. Paleomagnetic rotation of coastal Oregon is linked by a Klamath Mountains pole to geodetically and geologically determined motion of the Sierra Nevada block to derive a new Oregon Coast-North America (OC-NA) pole of rotation and velocity field. This long-term velocity field, which is independent of Pacific Northwest GPS data, is interpreted to be the result of Basin-Range extension and Pacific-North America dextral shear. The resulting Oregon Coast pole compares favorably to those derived solely from GPS data, although uncertainties are large. Subtracting the long-term motion from forearc GPS velocities reveals ENE motion with respect to an OC reference frame that is parallel to the direction of Juan de Fuca-OC convergence and decreases inland. We interpret this to be largely the result of subduction-related deformation. The adjusted mean GPS velocities are generally subparallel to those predicted from elastic dislocation models for Cascadia, but more definitive interpretations await refinement of the present large uncertainty in the Sierra Nevada block motion. Copyright ?? The Society of Geomagnetism and Earth, Planetary and Space Sciences (SGEPSS); The Seismological Society of Japan; The Volcanological Society of Japan; The Geodetic Society of Japan; The Japanese Society for Planetary Sciences.

Detrital-zircon geochronology of Paleozoic sedimentary rocks in the Hangay Hentey basin, north-central Mongolia: Implications for the tectonic evolution of the Mongol Okhotsk Ocean in central Asia

NASA Astrophysics Data System (ADS)

Kelty, Thomas K.; Yin, An; Dash, Batulzii; Gehrels, George E.; Ribeiro, Angela E.

2008-04-01

Understanding the development of the Central Asian Orogenic System (CAOS), which is the largest Phanerozoic accretionary orogen in the world, is critical to the determination of continental growth mechanisms and geological history of central Asia. A key to unraveling its geological history is to ascertain the origin and tectonic setting of the large flysch complexes that dominate the CAOS. These complexes have been variably interpreted as deep-marine deposits that were accreted onto a long-evolving arc against large continents to form a mega-accretionary complex or sediments trapped in back-arc to fore-arc basins within oceanic island-arc systems far from continents. To differentiate the above models we conducted U-Pb geochronological analyses of detrital-zircon grains from turbidites in the composite Hangay-Hentey basin of central Mongolia. This basin was divided by a Cenozoic fault system into the western and eastern sub-basins: the Hangay Basin in the west and Hentey basin in the east. This study focuses on the Hentey basin and indicates two groups of samples within this basin: (1) a southern group that were deposited after the earliest Carboniferous (˜ 339 Ma to 354 Ma) and a northern group that were deposited after the Cambrian to Neoproterozoic (˜ 504 Ma to 605 Ma). The samples from the northern part of the basin consistently contain Paleoproterozoic and Archean zircon grains that may have been derived from the Tuva-Mongol massif and/or the Siberian craton. In contrast, samples from the southern part of the basin contain only a minor component of early Paleozoic to Neoproterozoic zircon grains, which were derived from the crystalline basement bounding the Hangay-Hentey basin. Integrating all the age results from this study, we suggest that the Hangay-Hentey basin was developed between an island-arc system with a Neoproterozoic basement in the south and an Andean continental-margin arc in the north. The initiation of the southern arc occurred at or after the early Carboniferous, allowing accumulation of a flysch complex in a long-evolving accretionary complex.

Water-rock interactions in volcaniclastic sediments across the Izu-Bonin-Mariana Arc: comparison of sites U1438, U1201, 792 and 793.

NASA Astrophysics Data System (ADS)

van der Land, C.; Sena, C.; Loudin, L. C.; Zhang, Z.

2014-12-01

The rapid deposition of volcanogenic sediments, highly susceptible to alteration by seawater has led to distinct pore water geochemical profiles throughout the sedimentary basins of the Izu-Bonin-Mariana Arc. Drilling at Site U1438, in the Amami-Sankaku Basin, recovered a 1300 m thick volcaniclastic section overlain by a 160 m thick section of sediments largely devoid of volcanic input. At Site U1438, 67 porewater samples were analyzed onboard for salinity, pH, oxidation-reduction potential and major and trace element concentrations. Here we focus on the depth profiles of elements which were also analyzed at Sites U1201, 792 and 793. Chloride and Bromide concentrations display similar trends; near constant in the upper 160 m and a linear downward increase to maximum concentrations from 600 mbsf onwards. This increase is likely caused by uptake of water by secondary minerals, resulting in chloride and bromide enrichment in the porewater. Calcium and magnesium porewater concentrations display opposite trends in the upper 440 m; the first increases from 11.5 to 140 mM, and the latter decreases from 53 mM until its depletion in the porewater. Leaching of Ca from the glass-rich sediments and underlying igneous basement are potential sources for Ca in the porewater, while Mg, Na and K presumably replace Ca through cation-exchange. Compared to Site U1438, similar trends of major elements concentration in the pore water were observed at the nearby Sites U1201 (serpentine mud volcano in the forearc of the Mariana subduction system), 792 and 793 (both in the Izu-Bonin forearc sedimentary basin). However, differences in depositional rates, thickness and age of the sedimentary basins, geothermal gradients and the influence of serpentine mud flows, have led to distinct pore water geochemical profiles.

Megathrust Earthquakes and Sediment Input to the Subduction Channel

NASA Astrophysics Data System (ADS)

Scholl, David W.; Keranen, Katie; von Huene, Roland; Wells, Ray; Ryan, Holly; Kirby, Stephen

2010-05-01

HABITATS OF GREAT MEGATHRUST EARTHQUAKES: Great megathrust earthquakes (Mw8.5 or higher) most commonly (~65%) nucleate along subduction zones (SZ) bordered by laterally continuous (more than 500 km), sediment-flooded trenches. Examples include: south-central Chile (1922, Mw8.5; 1960, Mw9.5), eastern Alaska (1964, Mw9.2), Sumatra (2004, Mw9.1), Cascadia (1700, Mw9.0), Colombia (1906, Mw8.8), Sumatra (1883, Mw8.8), west-central Aleutian (1965, Mw8.7), central Aleutian (1986, Mw8.7), Sumatra (2005, Mw8.6), and Nankai (1707, Mw8.5). All known megathrust events greater than Mw9 ruptured at sediment-charged SZs (Alaska, S.C. Chile, Sumatra). Sediment entering high-seismicity SZs is typically a 1-3-km-thick wedge of trench-axis turbidite beds overlying a 0.3-2-km-thick sequence of hemipelagic or abyssal turbiditic deposits that accrued seaward of the trench. Most commonly, laterally-continuous turbidite wedges are built by down-axis flowing turbidity currents sourced from mountainous and/or glaciated drainages (e.g., SE Alaska, Cascadia, Southern Andes, Himalaya). Great rupture events also occur at SZs receiving little sediment, for example Kamchatka (1952, Mw9.0), Kuril Islands (1963, Mw8.5) and north Chile SZs (1868, Mw9.0). These SZs exhibit evidence of upper plate thinning, subsidence, and truncation effected by frontal and basal subduction erosion. They also have a SC filled with ~1 km or more of debris in transport toward the mantle. WORKINGS OF THE SUBDUCTION CHANNEL (SC): Beneath the submerged forearc, the SC functions to transport subducted ocean floor sediment and tectonically eroded forearc debris toward and ultimately into the mantle. The SC is the lowest structural unit containing upper plate crustal material and the seismogenic zone runs along the SC's upper boundary. It has long been conjectured (e.g., Ruff, 1989; PAGEOPH, v. 129. Nos 1/2) that a laterally uninterrupted, sediment- or debris-charged SC serves to smooth the surface of interplate slip to set up conditions for lengthy, high moment-release ruptures. Maximum slip is commonly concentrated beneath a locally thinned, upper plate crust underlying prominent forearc basins. These structures, in positive feed back, are likely deepened co-seismically by enhance basal subduction erosion. The removed material presumably lowers the effective stress on the decollement and sets up conditions for follow-on events of high, co-seismic slip. The SC also works tectonically to underplate the base of the inner submerged forearc and induce co-seismic uplift at high-angle reverse faults. SEISMIC CONSEQUENCES OF SUBDUCTION ZONE FEEDING: Observations imply that subducted bathymetric ridges and seamounts act to both nucleate seismic rupture and also arrest lateral rupturing. Thick sections of sedimentary and erosional debris entering the subduction channel appear to act differently and favor (1) continuation of rupture, (2) large slip beneath forearc basins, and (3) propogation of slip upward at outer-forearc splay faults and nearshore reverse faults to generate both local and trans-oceanic tsunamis. The potential for nucleation of great megathrust earthquakes along thickly sediment SZs, no matter the rate or lower plate underthrusting, obliquity of convergence, or crustal age, must be set high. Similarly, seismogenic risk for highly erosional SZs little perturbed by subducting relief must also be set high.

Carbonate sedimentation in an extensional active margin: Cretaceous history of the Haymana region, Pontides

NASA Astrophysics Data System (ADS)

Okay, Aral I.; Altiner, Demir

2016-10-01

The Haymana region in Central Anatolia is located in the southern part of the Pontides close to the İzmir-Ankara suture. During the Cretaceous, the region formed part of the south-facing active margin of the Eurasia. The area preserves a nearly complete record of the Cretaceous system. Shallow marine carbonates of earliest Cretaceous age are overlain by a 700-m-thick Cretaceous sequence, dominated by deep marine limestones. Three unconformity-bounded pelagic carbonate sequences of Berriasian, Albian-Cenomanian and Turonian-Santonian ages are recognized: Each depositional sequence is preceded by a period of tilting and submarine erosion during the Berriasian, early Albian and late Cenomanian, which corresponds to phases of local extension in the active continental margin. Carbonate breccias mark the base of the sequences and each carbonate sequence steps down on older units. The deep marine carbonate deposition ended in the late Santonian followed by tilting, erosion and folding during the Campanian. Deposition of thick siliciclastic turbidites started in the late Campanian and continued into the Tertiary. Unlike most forearc basins, the Haymana region was a site of deep marine carbonate deposition until the Campanian. This was because the Pontide arc was extensional and the volcanic detritus was trapped in the intra-arc basins and did not reach the forearc or the trench. The extensional nature of the arc is also shown by the opening of the Black Sea as a backarc basin in the Turonian-Santonian. The carbonate sedimentation in an active margin is characterized by synsedimentary vertical displacements, which results in submarine erosion, carbonate breccias and in the lateral discontinuity of the sequences, and differs from blanket like carbonate deposition in the passive margins.

Gas in Place Resource Assessment for Concentrated Hydrate Deposits in the Kumano Forearc Basin, Offshore Japan, from NanTroSEIZE and 3D Seismic Data

NASA Astrophysics Data System (ADS)

Taladay, K.; Boston, B.

2015-12-01

Natural gas hydrates (NGHs) are crystalline inclusion compounds that form within the pore spaces of marine sediments along continental margins worldwide. It has been proposed that these NGH deposits are the largest dynamic reservoir of organic carbon on this planet, yet global estimates for the amount of gas in place (GIP) range across several orders of magnitude. Thus there is a tremendous need for climate scientists and countries seeking energy security to better constrain the amount of GIP locked up in NGHs through the development of rigorous exploration strategies and standardized reservoir characterization methods. This research utilizes NanTroSEIZE drilling data from International Ocean Drilling Program (IODP) Sites C0002 and C0009 to constrain 3D seismic interpretations of the gas hydrate petroleum system in the Kumano Forearc Basin. We investigate the gas source, fluid migration mechanisms and pathways, and the 3D distribution of prospective HCZs. There is empirical and interpretive evidence that deeply sourced fluids charge concentrated NGH deposits just above the base of gas hydrate stability (BGHS) appearing in the seismic data as continuous bottoms simulating reflections (BSRs). These HCZs cover an area of 11 by 18 km, range in thickness between 10 - 80 m with an average thickness of 40 m, and are analogous to the confirmed HCZs at Daini Atsumi Knoll in the eastern Nankai Trough where the first offshore NGH production trial was conducted in 2013. For consistency, we calculated a volumetric GIP estimate using the same method employed by Japan Oil, Gas and Metals National Corporation (JOGMEC) to estimate GIP in the eastern Nankai Trough. Double BSRs are also common throughout the basin, and BGHS modeling along with drilling indicators for gas hydrates beneath the primary BSRs provides compelling evidence that the double BSRs reflect a BGHS for structure-II methane-ethane hydrates beneath a structure-I methane hydrate phase boundary. Additional drilling data would be needed to confirm the validity of this assessment, but the implications are that stacked NGH deposits could be common and unaccounted for in NGH reserve estimates.

The Tonalá fault in southeastern Mexico: Evidence that the Central America forearc sliver is not being detached?

NASA Astrophysics Data System (ADS)

Guzman-Speziale, M.; Molina-Garza, R. S.

2012-12-01

The Tonalá fault is a NW-SE oriented feature that flanks the Chiapas Massif on its southwestern side. Several authors coincide that the fault originally developed as a right-lateral structure in the Jurassic, but was reactivated as a left-lateral fault in the Miocene. Seismicity along the fault is low: Only one earthquake with magnitude 5.0 or larger is reported along the Tonalá fault in the years 1964 to present. Fault-plane solutions determined by the Mexican Seismological Survey for earthquakes along the fault show left-lateral, strike-slip faulting. The Tonalá fault lies on the northwestern continuation of the Central America volcanic arc. The volcanic arc is the site of medium-sized (magnitudes up to 6.5) shallow, right-lateral, strike-slip earthquakes. This has led several workers to propose that the forearc sliver is being detached from the Caribbean plate along the arc, moving northward. GPS studies have confirmed relative motion between the Chortis block and the forearc sliver. Recent and current motion along the Tonalá fault is in contradiction with motion and detachment of the forearc sliver along the Central America volcanic arc. Left-lateral motion along it cannot accomodate northwest displacement of the forearc sliver. Motion of the Central America forearc would require NW directed compression between the continental shelf of Chiapas and the forearc itself, which is not observed. Therefore, either another fault (or faults) accomodates right-lateral motion and detachment of the forearc sliver, or the sliver is not being detached and relative motion between the forearc sliver and the Chortis block corresponds to displacement of the latter. We suggest that, as proposed by previous authors, the Tonalá fault is instead part of a fault system that runs from the state of Oaxaca (the Valle Nacional fault), forming an arc concave to the northeast, and running perpendicular to the maximum slope of subduction in the area.

Determining sources of deep-sea mud by organic matter signatures in the Sunda trench and Aceh basin off Sumatra

NASA Astrophysics Data System (ADS)

Omura, Akiko; Ikehara, Ken; Arai, Kohsaku; Udrekh

2017-12-01

The content, optically determined properties, and stable isotope composition of organic carbon in fine-grained sediment cores were analyzed to investigate the origins of deep-sea sediments deposited in the Aceh forearc basin and on the Sunda trench floor off Sumatra from the late Pleistocene to the Holocene. In the Aceh basin, the depositional frequency of turbidite mud decreased as sea level rose during the deglaciation. The terrigenous organic carbon content was high at the end of the last glacial period, whereas during the deglaciation most of the organic carbon was of marine origin. In the Sunda trench, the Holocene turbidites consisted of remobilized slope sediments from two different sources: sediments derived from the old Bengal/Nicobar fan included thermally matured organic fragments, whereas those derived from the trench slope contained little terrigenous organic carbon.

First results from TN273 studies of the SE Mariana Forearc rift

NASA Astrophysics Data System (ADS)

Ribeiro, J. M.; Stern, R. J.; Kelley, K. A.; Shaw, A. M.; Shimizu, N.; Martinez, F.; Ishii, T.; Ishizuka, O.; Manton, W. I.

2012-12-01

TN 273 aboard R/V Thomas Thompson (Dec. 22 2011- Jan. 22 2012) studied an unusual region of rifting affecting the southern Mariana forearc S.W. of Guam. The S.E. Mariana Forearc Rift (SEMFR) formed by diffuse tectonic and volcanic deformation (Martinez and Sleeper, this meeting) ~2.7-3.7 Ma ago to accommodate opening of the southernmost Mariana Trough backarc basin. A total of 730 km linear-track of SEMFR seafloor was surveyed with deep-towed side-scan sonar IMI-30. 14 dredges provided samples of SEMFR igneous rocks, analyzed for whole rock (WR) and glass compositions. These new results coupled with results of earlier investigations confirm that SEMFR is dominated by Miocene lavas along with minor gabbro and diabase. SEMFR lavas range in major element composition from primitive basalt to fractionated andesite (Mg# = 0.36-0.73; SiO2 = 50-57 wt%), mainly controlled by crystal fractionation. Rare Earth Element (REE) patterns range from LREE-depleted, N-MORB-like to flat patterns, reflecting different mantle processes (i.e. different sources, degree of melting …). Glassy rinds and olivine-hosted melt inclusions in these lavas contain variable volatile compositions (F = 75-358 ppm, S = 35-1126 ppm, Cl= 74-1400 ppm, CO2 = 15-520 ppm, 0.36-2.36 wt% H2O). SEMFR lavas show spider diagrams with positive anomalies in LILE and negative anomalies in HSFE. SEMFR lavas have backarc basin-like (BAB-like) chemical composition (H2O < 2.5wt%, Ba/Yb~20, Nb/Yb~1 and ɛNd~9) along with stronger enrichment in Rb and Cs than arc and BAB lavas, as demonstrated by their higher Rb/Th and Cs/Ba ratios in WR and glasses, which may reflect the role of the ultra-shallow fluids. Ultra-shallow fluids are derived from the top of the subducting slab, beneath the forearc, where most of the water and the fluid-mobile elements (Rb, Cs, Ba,) are thought to be released (Schmidt and Poli, 1998, EPSL, Savov et al., 2005, G-3). Our results suggest that i) SEMFR lavas formed by metasomatism of a BAB mantle source by ultra-shallow fluids, likely released from subducted sediments and the altered oceanic crust; and ii) the ultra-shallow fluid is aqueous and is characterized by enrichment in Cs and Rb, suggesting that Cs and Rb are decoupled from Ba in ultra-shallow subduction processes.

Changes in In Situ Stress Across the Nankai and Cascadia Convergent Margins From Borehole Breakout Measurements During Ocean Drilling

NASA Astrophysics Data System (ADS)

McNeill, L.; Moore, J. C.; Yamada, Y.; Chang, C.; Tobin, H.; Kinoshita, M.; Gulick, S.; Moore, G.; Iodp Exp. 314/315/316 Science Party, &

2008-12-01

Borehole breakouts are commonly observed in borehole images shortly after drilling of continental margin sites. This study aims to compile and compare these results to determine what in situ shallow stress measurements can tell us about the larger scale tectonic regime. Recent Logging While Drilling resistivity images across the Kumano transect of the Nankai subduction zone, during Expedition 314, Stage 1 of the IODP NanTroSEIZE project, add to this dataset. Expedition 314 site data within the prism (C0001, C0004, C0006, including the megasplay fault system which may overlie the seismogenic updip limit) suggest maximum compressive stress (SHmax) is perpendicular to the margin (not parallel to the convergence vector) but is rotated through 90° at the forearc basin site (C0002). These results may point to changes in stress state of the shallow forearc from east to west: compression in the aseismic active prism (with evidence of strain partitioning of oblique convergence); and extension above the updip seismogenic zone suggesting focus of plate coupling at the plate boundary and not in the shallow forearc. Further south, ODP Leg 196 drilled the prism toe (808) with breakouts indicating SHmax parallel to the convergence vector, in contrast to Exp. 314 results. The stress state in the shallow prism at Site 808 may be affected by nearby seamount subduction or may represent differences in strain partitioning. On the Cascadia margin, two drilling legs have collected LWD borehole images (Leg 204 and Exp. 311). Leg 204 drilled 3 sites at hydrate ridge in the C Cascadia outer prism with breakout orientations variable between closely spaced sites. Prism fold axes are parallel to the margin so we might expect SHmax perpendicular to the margin as in Exp. 314. Deviations from this orientation may reflect local and surface effects (Goldberg and Janik, 2006). Exp. 311, N Cascadia, drilled 5 sites across the prism with breakouts in LWD images. Subduction is not oblique here, in contrast to the other sites discussed, and most sites indicate SHmax almost parallel to convergence and normal to major fold axes. In one case, the in situ stress orientation is also compatible with shallow normal faulting from seismic data. Site 1325, in a slope basin, deviates from this orientation and may reflect local processes. Borehole breakouts within the shallow forearc of convergent margins are often in agreement with other indications of regional tectonic stress and may be indicative of processes at depth. Deviations may represent local stresses due to gravitational processes.

Crustal growth of the Izu-Ogasawara arc estimated from structural characteristics of Oligocene arc

NASA Astrophysics Data System (ADS)

Takahashi, N.; Yamashita, M.; Kodaira, S.; Miura, S.; Sato, T.; No, T.; Tatsumi, Y.

2011-12-01

Japan Agency for Marine-Earth Science and Technology (JAMSTEC) carried out seismic surveys using a multichannel reflection system and ocean bottom seismographs, and we have clarified crustal structures of whole Izu-Ogasawara (Bonin)-Marina (IBM) arc since 2002. These refection images and velocity structures suggest that the crustal evolution in the intra-oceanic island arc accompanies with much interaction of materials between crust and mantle. Slow mantle velocity identified beneath the thick arc crusts suggests that dense crustal materials transformed into the mantle. On the other hand, high velocity lower crust can be seen around the bottom of the crust beneath the rifted region, and it suggests that underplating of mafic materials occurs there. Average crustal production rate of the entire arc is larger than expected one and approximately 200 km3/km/Ma. The production rate of basaltic magmas corresponds to that of oceanic ridge. Repeated crustal differentiation is indispensable to produce much light materials like continental materials, however, the real process cannot still be resolved yet. We, therefore, submitted drilling proposals to obtain in-situ middle crust with P-wave velocity of 6 km/s. In the growth history of the IBM arc, it is known by many papers that boninitic volcanisms preceded current bimodal volcanisms based on basaltic magmas. The current volcanisms accompanied with basaltic magmas have been occurred since Oligocene age, however, the tectonic differences to develop crustal architecture between Oligocene and present are not understood yet. We obtained new refraction/reflection data along an arc strike of N-S in fore-arc region. Then, we estimate crustal structure with severe change of the crustal thickness from refraction data, which are similar to that along the volcanic front. Interval for location of the thick arc crust along N-S is very similar to that along the volcanic front. The refection image indicates that the basement of the fore-arc is covered with thick sediments with the age of Oligocene and that half graben structures are much identified between the Oligocene arc and the current volcanic front. This may suggest that the Oligocene arc in current fore-arc basin is cut off from the current volcanic arc. Therefore, the Oligocene arc in the fore-arc may still keep structural characteristics inside the body since Oligocene age, which are before cutting off from the current volcanic front.

Active deformation and evolution of the upper forearc slope of the central Ryukyu Arc, northwestern Pacific

NASA Astrophysics Data System (ADS)

Arai, K.; Inoue, T.; Sato, T.

2016-12-01

The Ryukyu Arc, which extend for over 1200 km along the east coast of Asia from Kyushu to Taiwan, and the associated Ryukyu Trench, are products of the subduction of the Philippine Sea Plate beneath the Eurasian Plate. The Okinawa Trough, a back-arc basin located landward of the Ryukyu Arc, formed in the Late Miocene (Gungor et al., 2012) or the Late Pliocene-Early Pleistocene (Sibuet et al., 1998); its formation is a key geologic event associated with complex tectonic movements and changes in the topographic configuration of the Ryukyu Arc. Geological Survey of Japan (GSJ), AIST has started the marine geological mapping project around Ryukyu Arc since the 2008 FY. Multi channel (16 ch) high-resolution seismic profiles were acquired during these cruises by the GI-gun (355cu. inch) or the Cluster-gun (30+30 cu. inch) systems. Survey area in the southeast off Okinawa Island is located on the upper forearc slope along the Ryukyu Trench. Seismic reflections of shelf and the upper forearc slope show no obvious deformation such as the fold and faults parallel to the Ryukyu Trench axis. In contrast, some active faults, which were perpendicular to the Ryukyu Trench axis (NW-SE direction), were observed. An acoustic basement, which is characterized distinct reflector had tilted southeastward (trenchward) and was unconformable overlain by the stratified sediments. These sediments divided into four seismic units. We present the geological history and tectonics of the central Ryukyu Arc.

Variations in seismic velocity distribution along the Ryukyu (Nansei-Shoto) Trench subduction zone at the northwestern end of the Philippine Sea plate

NASA Astrophysics Data System (ADS)

Nishizawa, Azusa; Kaneda, Kentaro; Oikawa, Mitsuhiro; Horiuchi, Daishi; Fujioka, Yukari; Okada, Chiaki

2017-06-01

The Ryukyu (Nansei-Shoto) island arc-trench system, southwest of Japan, is formed by the subduction of the Philippine Sea (PHS) plate. Among the subduction zones surrounding the Japan Islands, the Ryukyu arc-trench system is unique in that its backarc basin, the Okinawa Trough, is the area with current extensively active rifting. The length of the trench is around 1400 km, and the geological and geophysical characteristics vary significantly along the trench axis. We conducted multichannel seismic (MCS) reflection and wide-angle seismic surveys to elucidate the along-arc variation in seismic structures from the island arc to the trench regions, shooting seven seismic lines across the arc-trench system and two along-arc lines in the island arc and the forearc areas. The obtained P-wave velocity models of the Ryukyu arc crust were found to be heterogeneous (depending on the seismic lines), but they basically consist of upper, middle, and lower crusts, indicating a typical island arc structure. Beneath the bathymetric depressions cutting the island arc—for example, the Kerama Gap and the Miyako Saddle—the MCS record shows many across-arc normal faults, which indicates the presence of an extensional regime along the island arc. In the areas from the forearc to the trench, the subduction of the characteristic seafloor features on the PHS plate affects seismic structures; the subducted bathymetric high of the Amami Plateau is detected in the northern trench: the Luzon-Okinawa fracture zone beneath the middle and southern trenches. There are low-velocity (< 4.5 km/s) wedges along the forearc areas, except for off Miyako-jima Island. The characteristic high gravity anomaly at the forearc off Miyako-jima Island is caused not by a bathymetric high of a large-scale accretionary wedge but by shallower materials with a high P-wave velocity of 4.5 km/s.[Figure not available: see fulltext.

Nurture Versus Nature: Accounting for the Differences Between the Taiwan and Timor active arc-continent collisions

NASA Astrophysics Data System (ADS)

Harris, R. A.

2011-12-01

The active Banda arc/continent collision of the Timor region provides many important contrasts to what is observed in Taiwan, which is mostly a function of differences in the nature of the subducting plate. One of the most important differences is the thermal state of the respective continental margins: 30 Ma China passive margin versus 160 Ma NW Australian continental margin. The subduction of the cold and strong NW Australian passive margin beneath the Banda trench provides many new constraints for resolving longstanding issues about the formative stages of collision and accretion of continental crust. Some of these issues include evidence for slab rollback and subduction erosion, deep continental subduction, emplacement or demise of forearc basement, relative amounts of uplift from crustal vs. lithospheric processes, influence of inherited structure, partitioning of strain away from the thrust front, extent of mélange development, metamorphic conditions and exhumation mechanisms, continental contamination and accretion of volcanic arcs, does the slab tear, and does subduction polarity reverse? Most of these issues link to the profound control of lower plate crustal heterogeneity, thermal state and inherited structure. The thermomechanical characteristics of subducting an old continental margin allow for extensive underthrusting of lower plate cover units beneath the forearc and emplacement and uplift of extensive nappes of forearc basement. It also promotes subduction of continental crust to deep enough levels to experience high pressure metamorphism (not found in Taiwan) and extensive contamination of the volcanic arc. Seismic tomography confirms subduction of continental lithosphere beneath the Banda Arc to at least 400 km with no evidence for slab tear. Slab rollback during this process results in massive subduction erosion and extension of the upper plate. Other differences in the nature of the subducting plates in Taiwan in Timor are differences in the lateral continuity of the continental margins. The northern Australian continental margin is highly irregular with many rift basins subducting parallel to their axes. This feature gives rise to irregularities in the uplift pattern of the collision and its continental margin parallel structural grain. Another major difference between Taiwan and Timor is the mechanical stratigraphy entering the trench. The Australian continental margin bears a carbonate rich pre and post rift sequence that is separated by a 1000 m thick, over pressured mudstone unit that acts as major detachment and promotes extensive mud diapirism. The post breakup Australian Passive Margin Sequence is incorporated into the orogenic wedge by frontal accretion and forms a classic imbricate thrust stack near the front of the Banda forearc. The pre breakup Gondwana Sequence below the detachment continues at least to depth of 30 km in the subduction channel beneath the Banda forearc upper plate and stacks up into a duplex zone that forms structural culminations throughout Timor. The upper plate of both collisions is similar in nature but is deformed in different ways due to the strong influence of the lower plate. However, both have extensive subduction erosion and demise of the forearc and systematic accretion of the arc.

Paleogene palaeogeography and basin evolution of the Western Carpathians, Northern Pannonian domain and adjoining areas

NASA Astrophysics Data System (ADS)

Kováč, Michal; Plašienka, Dušan; Soták, Ján; Vojtko, Rastislav; Oszczypko, Nestor; Less, György; Ćosović, Vlasta; Fügenschuh, Bernhard; Králiková, Silvia

2016-05-01

The data about the Paleogene basin evolution, palaeogeography, and geodynamics of the Western Carpathian and Northern Pannonian domains are summarized, re-evaluated, supplemented, and newly interpreted. The presented concept is illustrated by a series of palinspastic and palaeotopographic maps. The Paleogene development of external Carpathian zones reflects gradual subduction of several oceanic realms (Vahic, Iňačovce-Kričevo, Szolnok, Magura, and Silesian-Krosno) and growth of the orogenic accretionary wedge (Pieniny Klippen Belt, Iňačovce-Kričevo Unit, Szolnok Belt, and Outer Carpathian Flysch Belt). Evolution of the Central Western Carpathians is characterized by the Paleocene-Early Eocene opening of several wedge-top basins at the accretionary wedge tip, controlled by changing compressional, strike-slip, and extensional tectonic regimes. During the Lutetian, the diverging translations of the northward moving Eastern Alpine and north-east to eastward shifted Western Carpathian segment generated crustal stretching at the Alpine-Carpathian junction with foundation of relatively deep basins. These basins enabled a marine connection between the Magura oceanic realm and the Northern Pannonian domain, and later also with the Dinaridic foredeep. Afterwards, the Late Eocene compression brought about uplift and exhumation of the basement complexes at the Alpine-Carpathian junction. Simultaneously, the eastern margin of the stretched Central Western Carpathians underwent disintegration, followed by opening of a fore-arc basin - the Central Carpathian Paleogene Basin. In the Northern Hungarian Paleogene retro-arc basin, turbidites covered a carbonate platform in the same time. During the Early Oligocene, the rock uplift of the Alpine-Carpathian junction area continued and the Mesozoic sequences of the Danube Basin basement were removed, along with a large part of the Eocene Hungarian Paleogene Basin fill, while the retro-arc basin depocentres migrated toward the east. The Rupelian basins gained a character of semi-closed sea spreading from the Magura Basin across the Central Western Carpathians up to the Hungarian Paleogene Basin. In the Late Oligocene, the Magura Basin connection with the Northern Hungarian Paleogene Basin remained open, probably along the northern edge of the Tisza microplate, and anoxic facies were substituted by open marine environments.

Topography of the Overriding Plate During Progressive Subduction: A Dynamic Model to Explain Forearc Subsidence

NASA Astrophysics Data System (ADS)

Chen, Zhihao; Schellart, Wouter P.; Duarte, João. C.; Strak, Vincent

2017-10-01

Overriding plate topography provides constraints on subduction zone geodynamics. We investigate its evolution using fully dynamic laboratory models of subduction with techniques of stereoscopic photogrammetry and particle image velocimetry. Model results show that the topography is characterized by an area of forearc dynamic subsidence, with a magnitude scaling to 1.44-3.97 km in nature, and a local topographic high between the forearc subsided region and the trench. These topographic features rapidly develop during the slab free-sinking phase and gradually decrease during the steady state slab rollback phase. We propose that they result from the variation of the vertical component of the trench suction force along the subduction zone interface, which gradually increases with depth and results from the gradual slab steepening during the initial transient slab sinking phase. The downward mantle flow in the nose of the mantle wedge plays a minor role in driving forearc subsidence.

Active shortening of the Cascadia forearc and implications for seismic hazards of the Puget Lowland

USGS Publications Warehouse

Johnson, S.Y.; Blakely, R.J.; Stephenson, W.J.; Dadisman, S.V.; Fisher, M.A.

2004-01-01

Margin-parallel shortening of the Cascadia forearc is a consequence of oblique subduction of the Juan de Fuca plate beneath North America. Strike-slip, thrust, and oblique crustal faults beneath the densely populated Puget Lowland accommodate much of this north-south compression, resulting in large crustal earthquakes. To better understand this forearc deformation and improve earthquake hazard, assessment, we here use seismic reflection surveys, coastal exposures of Pleistocene strata, potential-field data, and airborne laser swath mapping to document and interpret a significant structural boundary near the City of Tacoma. This boundary is a complex structural zone characterized by two distinct segments. The northwest trending, eastern segment, extending from Tacoma to Carr Inlet, is formed by the broad (??? 11.5 km), southwest dipping (??? 11??-2??) Rosedale monocline. This monocline raises Crescent Formation basement about 2.5 km, resulting in a moderate gravity gradient. We interpret the Rosedale monocline as a fault-bend fold, forming above a deep thrust fault. Within the Rosedale monocline, inferred Quaternary strata thin northward and form a growth triangle that is 4.1 to 6.6 km wide at its base, suggesting ??? 2-3 mm/yr of slip on the underlying thrust. The western section of the >40-km-long, north dipping Tacoma fault, extending from Hood Canal to Carr Inlet, forms the western segment of the Tacoma basin margin. Structural relief on this portion of the basin margin may be several kilometers, resulting in steep gravity and aeromagnetic anomalies. Quaternary structural relief along the Tacoma fault is as much as 350-400 m, indicating a minimum slip rate of about 0.2 mm/yr. The inferred eastern section of the Tacoma fault (east of Carr Inlet) crosses the southern part of the Seattle uplift, has variable geometry along strike, and diminished structural relief. The Tacoma fault is regarded as a north dipping backthrust to the Seattle fault, so that slip on a master thrust fault at depth could result in movement on the Seattle fault, the Tacoma fault, or both.

Episodic Deep Fluid Expulsion at Mud Volcanoes in the Kumano Forearc Basin, SE Offshore Japan

NASA Astrophysics Data System (ADS)

Hammerschmidt, S.; Kopf, A.

2014-12-01

Compressional forces at convergent margins govern a variety of processes, most prominently earthquakes, landslides and mud volcanoes in the forearc. Although all seem related to fluid pressure changes, mud volcanoes are not only characterized by expulsion of fluids, but also fluidized mud and clasts that got ripped-up during mud ascension. They hence provide information regarding mobilization depth, diagenetic overprint, and geodynamic pathways. At the Nankai Trough subduction zone, SE offshore Japan, mud volcanism id common and supposed to be related to seismogenic processes. During MARUM Expedition SO-222 with R/V SONNE, mud volcanoes in the Kumano forearc basin were mapped, cored and sampled. By extending the Integrated Ocean Drilling Program (IODP) Kumano transect landwards, 5 new mud volcanoes were identified by multibeam mapping. Cores revealed mud breccia with semi-consolidated silt- to claystone clasts and gaseous fluid escape structures, while the hemipelagic background sediments are characterized by intercalations of turbidites, ash layers and calcareous fossils. Clasts were subject to thin-section analyses, and the cores were sampled for XRD analyses and radiocarbon dating. Clasts showed prominent deformation structures, neomorphism and pores and fractures filled with polycrystalline quartz and/or calcite cement, probably formed during deep burial and early metamorphosis. Illite crystallinity based on XRD measurements varies between 0.24 and 0.38, which implies that the material originates from the Anchizone at depths ≥ 4 km. Radiocarbon dating revealed ages between 4450 and 30300 yr cal. BP, with age reversals occurring not earlier than 17000 yr cal. BP. Radiocarbon dating beneath turbidites and ash layers found at mud volcano #9 points to an episodic occurrence of these earthquake-related features in intervals of ca. 620 yr, while the mud volcano itself remained inactive. In summary, the preliminary results suggest that the mud volcanoes are nurtured from a reservoir within the older part of the accretionary prism, but that mud volcanic activity is less frequent than major earthquakes. Future models will focus on source depth and temperature, and might elucidate the prerequisites for fluid migration and its role in seismogenesis at the Nankai Trough subduction zone.

Geological Evidence That Resolves the Baja-BC Controversy: Detrital Zircons Indicate That Vancouver Island Was Adjacent to Southern California in the Late Cretaceous

NASA Astrophysics Data System (ADS)

Guest, B.; Matthews, W.; Coutts, D. S.; Bain, H.; Hubbard, S. M.

2015-12-01

The Baja-BC hypothesis is at the center of a great earth sciences controversy. It stems from paleomagnetic observations that require large-scale displacements of continental crust from low latitudes (Baja, California) to moderate latitudes (British Columbia). Many geologists dispute the scale of the displacements due to a lack of corroborating geological evidence. We provide a robust, geological dataset that confirms the paleomagnetic observations. Detrital zircons from Cretaceous to Paleocene sandstone of the Nanaimo Group, which crops out in western Vancouver Island and the Gulf Islands of southwest British Columbia, are analyzed. The data show a clear transition from local <300 Ma western Coast Plutonic Complex sources in the Campanian, to sources that include a significant component of >300 Ma grains in the Maastrichtian-Paleogene. An identical pattern is observed in detrital zircon datasets from southern California forearc basin deposits, and schists interpreted as the subducted remnants of forearc deposits. With a high-n dataset (n=3041) we are able to rule out possible >300 Ma source regions in Canada and the northern United States, and uniquely tie Nanaimo Group rocks to the Mojave-Sonora region of SW United States. This implies that at the end of the Cretaceous, Vancouver Island and western mainland BC were adjacent to southern California and northwestern Mexico, requiring 1900 km of displacement during the latest Cretaceous and Paleocene, consistent with paleomagnetic results. An implication of this result is that the western Coast Batholith of southwest BC was positioned between the northern Peninsular Ranges and southern Sierra Nevada batholiths in the late Cretaceous, and likely represents a displaced segment of a once continuous Cordilleran arc batholith. These results have broad implications for our understanding of episodic arc magmatism in the Cordillera, the tectonic evolution of western North America, Laramide orogenesis, the development and extent of the Nevadaplano, and the onset of Basin and Range extension.

Cenozoic forearc tectonics in northeastern Japan: Relationships between outer forearc subsidence and plate boundary kinematics

NASA Astrophysics Data System (ADS)

Regalla, Christine

Here we investigate the relationships between outer forearc subsidence, the timing and kinematics of upper plate deformation and plate convergence rate in Northeast Japan to evaluate the role of plate boundary dynamics in driving forearc subsidence. The Northeastern Japan margin is one of the first non-accretionary subduction zones where regional forearc subsidence was argued to reflect tectonic erosion of large volumes of upper crustal rocks. However, we propose that a significant component of forearc subsidence could be the result of dynamic changes in plate boundary geometry. We provide new constraints on the timing and kinematics of deformation along inner forearc faults, new analyses of the evolution of outer forearc tectonic subsidence, and updated calculations of plate convergence rate. These data collectively reveal a temporal correlation between the onset of regional forearc subsidence, the initiation of upper plate extension, and an acceleration in local plate convergence rate. A similar analysis of the kinematic evolution of the Tonga, Izu-Bonin, and Mariana subduction zones indicates that the temporal correlations observed in Japan are also characteristic of these three non-accretionary margins. Comparison of these data with published geodynamic models suggests that forearc subsidence is the result of temporal variability in slab geometry due to changes in slab buoyancy and plate convergence rate. These observations suggest that a significant component of forearc subsidence at these four margins is not the product of tectonic erosion, but instead reflects changes in plate boundary dynamics driven by variable plate kinematics.

Upper Cretaceous and lower Eocene conglomerates of Western Transverse Ranges: evidence for tectonic rotation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reed, W.E.; Krause, R.G.F.

1989-04-01

Stratigraphic and paleomagnetic studies have suggested that the western Transverse Ranges (WTR) microplate is allochthonous, and may have experienced translational and rotational motions. Present paleocurrent directions from the Upper Cretaceous Jalama Formation of the Santa Ynez Mountains are north-directed; these forearc sediments (Great Valley sequence) contain magmatic arc-derived conglomerate clasts from the Peninsular Ranges in southern California. Paleocurrents in the lower Eocene Juncal and Cozy Dell Formations are south-directed. This juxtaposition is best explained by 90/degrees/ or more of clockwise rotation of the WTR microplate, so that Upper Cretaceous forearc sediments sourced from the Peninsular Ranges magmatic arc were depositedmore » by west-directed currents. Eocene sediments were derived from an uplifted portion of the western basin margin and deposited by east-directed currents. Franciscan olistoliths in the Upper Cretaceous sediments indicate deposition adjacent to an accretionary wedge; conglomeratic clasts recycled from the Upper Cretaceous sequence, and radiolarian cherts and ophiolitic boulders in the Eocene strata indicate derivation from an outer accretionary ridge.« less

Caribbean basin framework, 3: Southern Central America and Colombian basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kolarsky, R.A.; Mann, P.

1991-03-01

The authors recognize three basin-forming periods in southern Central America (Panama, Costa Rica, southern Nicaragua) that they attempt to correlate with events in the Colombian basin (Bowland, 1984): (1) Early-Late Cretaceous island arc formation and growth of the Central American island arc and Late Cretaceous formation of the Colombian basin oceanic plateau. During latest Cretaceous time, pelagic carbonate sediments blanketed the Central American island arc in Panama and Costa Rica and elevated blocks on the Colombian basin oceanic plateau; (2) middle Eocene-middle Miocene island arc uplift and erosion. During this interval, influx of distal terrigenous turbidites in most areas ofmore » Panama, Costa Rica, and the Colombian basin marks the uplift and erosion of the Central American island arc. In the Colombian basin, turbidites fill in basement relief and accumulate to thicknesses up to 2 km in the deepest part of the basin. In Costa Rica, sedimentation was concentrated in fore-arc (Terraba) and back-arc (El Limon) basins; (3) late Miocene-Recent accelerated uplift and erosion of segments of the Central American arc. Influx of proximal terrigenous turbidites and alluvial fans in most areas of Panama, Costa Rica, and the Colombian basin marks collision of the Panama arc with the South American continent (late Miocene early Pliocene) and collision of the Cocos Ridge with the Costa Rican arc (late Pleistocene). The Cocos Ridge collision inverted the Terraba and El Limon basins. The Panama arc collision produced northeast-striking left-lateral strike-slip faults and fault-related basins throughout Panama as Panama moved northwest over the Colombian basin.« less

The Ordovician magmatic arc in the northern Chile-Argentina Andes between 21° and 26° south latitude

NASA Astrophysics Data System (ADS)

Niemeyer, Hans; Götze, Jens; Sanhueza, Marcos; Portilla, Carolina

2018-01-01

A continental magmatic arc (the Famatinian magmatic arc) was developed on the western margin of Gondwana during the Early to Middle Ordovician. This has a northwestern orientation in the northern Chile-Argentina Andes between 21° and 26° south latitude with a northeastern directed subduction zone and developed on a continental crust represented by a metamorphic basement. A paleogeographical scheme for the Ordovician magmatic arc is proposed and two tectonic environments can be recognized from our own data and data from the literature: forearc and arc. The Cordón de Lila Complex can be assigned to a forearc position. Here the turbiditic flows become paralell to the northwestern elongation of the magmatic arc. The sedimentation in the frontal-arc high platform of the forearc is represented by stromatolitic limestones and a zone of phosphate production. The internal structure of the arc can be inferred from the petrographic composition of the turbidites: basaltic and andesitic lavas, dacitic and/or rhyolitic lavas and ash fall tuffs. Also the Quebrada Grande Formation was developed on the forearc. Plutonic Ordovician rocks testify the continuity of the magmatic arc. The data about the basement exposed in the present paper do not support the existence of the Arequipa-Antofalla Terrane.

New Insights on the Geologic Framework of Alaska and Potential Targets of Opportunity for Future Research

NASA Astrophysics Data System (ADS)

Ridgway, K.; Trop, J. M.; Finzel, E.; Brennan, P. R.; Gilbert, H. J.; Flesch, L. M.

2015-12-01

Studies the past decade have fundamentally changed our perspective on the Mesozoic and Cenozoic tectonic configuration of Alaska. New concepts include: 1) A link exists between Mesozoic collisional zones, Cenozoic strike-slip fault systems, and active deformation that is related to lithospheric heterogeneities that remain over geologic timescales. The location of the active Denali fault and high topography, for example, is within a Mesozoic collisional zone. Rheological differences between juxtaposed crustal blocks and crustal thickening in this zone have had a significant influence on deformation and exhumation in south-central Alaska. In general, the original configuration of the collisional zone appears to set the boundary conditions for long-term and active deformation. 2) Subduction of a spreading ridge has significantly modified the convergent margin of southern Alaska. Paleocene-Eocene ridge subduction resulted in surface uplift, unconformity development and changes in deposystems in the forearc region, and magmatism that extended from the paleotrench to the retroarc region. 3) Oligocene to Recent shallow subduction of an oceanic plateau has markedly reconfigured the upper plate of the southern Alaska convergent margin. This ongoing process has prompted growth of some of the largest mountain ranges on Earth, exhumation of the forearc and backarc regions above the subducted slab, development of a regional gap in arc magmatism above the subducted slab as well as slab-edge magmatism, and displacement on the Denali fault system. In the light of these new tectonic concepts for Alaska, we will discuss targets of opportunity for future integrated geologic and geophysical studies. These targets include regional strike-slip fault systems, the newly recognized Bering plate, and the role of spreading ridge and oceanic plateau subduction on the location and pace of exhumation, sedimentary basin development, and magmatism in the upper plate.

Structure of the Lesser Antilles subduction zone from seismic refraction tomography

NASA Astrophysics Data System (ADS)

Charvis, P.; Evain, M.; Galve, A.; Laigle, M.; Ruiz Fernandez, M.; Kopp, H.; Hirn, A.; Flueh, E. R.; Party, T.

2011-12-01

In 2007, two wide-angle seismic experiments were conducted to constrain the structure of the central Lesser Antilles subduction zone. During the Sismantilles II experiment, seismic refraction data recorded by a network of 27 OBSs over an area of more than 6000 km2 provide new insights on the crustal structure of the forearc offshore Martinique and Dominica islands. The tomographic inversion of first arrival travel times provides a 3D P-wave velocity model down to 15 km. Basement velocity gradient shows the forearc made of two distinct units: A high velocity gradient domain named the inner forearc in comparison to a lower velocity gradient domain located further trenchward named the outer forearc. The inner forearc is likely the extension at depth of the Mesozoic magmatic crust outcropping to the north in La Désirade Island and along the scarp of the Karukera spur and then represent the eastern limit of the Caribbean Plateau. The outer forearc probably consists of magmatic rocks of a similar origin. It could be either part of the margin of the Caribbean Plateau, like the inner forearc, but the crust was thinned and fractured during the past tectonic history of the area or by recent subduction processes, or an oceanic terrane more recently accreted to the island arc. Whereas the inner forearc appears as a rigid block uplifted and tilted as a whole to the south, short wavelength deformations of the outer forearc basement are observed, beneath a 3 to 6 km thick sedimentary pile, in relation with the subduction of the Tiburon ridge and associated seamounts. North, offshore Dominica Island, the outer forearc is 70 km wide. It extends as far as 180 km to the east of the volcanic front where it acts as a backstop on which the accretionary wedge developed. Its width decreases strongly to the south to terminate offshore Martinique where the inner forearc acts as the backstop. Two dense wide-angle seismic refraction lines, shot during the Trail experiment (2007) provides a 2D velocity model across the whole arc north and south of Dominica Island. Wide-angle reflection travel times were inverted to constrain the deepest interfaces. It appears that the overriding plate is characterized by a thick crust, the Moho interface being at 30 km depth along both profile. To the south, an intra-crustal interface 20 km deep that strikes only beneath the inner forearc region is also imaged separating the upper crust from the lower crust. The Lesser Antilles Thales scientific party is composed of Bayrakci, G., Bécel, A., Charvis, P., Diaz, J., Evain, M., Flueh, E., Gallart, J., Gailler, A., Galve, A., Hello, Y., Hirn, A., Kopp, H., Krabbenhoeft, A., Laigle, M., Lebrun, J. F., Monfret, T., Papenberg, C., Planert, L., Ruiz, M., Sapin, M., Weinzierl, W.

The structure of the Calabrian subduction system from the fore-arc to the back-arc: new insights from wide-angle seismic data

NASA Astrophysics Data System (ADS)

Prada, M.; Sallares, V.; Ranero, C. R.; Grevemeyer, I.; Zitellini, N.

2017-12-01

The Calabrian arc is a Neogene-Quaternary arcuate orogen result from the subduction of the Ionian Lithosphere under Calabria. The SE migration of this subduction system, triggered by slab rollback, caused the opening of the Tyrrhenian back-arc basin. The large-scale lithospheric structure of the subduction system is mostly imaged by regional earthquake tomography studies. The limited resolution of these studies, however, hinders the definition of smaller-scale details on the location, nature and transition of different lithospheric domains, which are crucial to study the geodynamic evolution of the system. Here we perform travel-time tomography of offshore and onshore active-source wide-angle seismic data to define the 2D Vp structure of the entire Calabrian subduction system. The data were acquired along a 550 km-long transect that extends from the Tyrrhenian back-arc domain to the fore-arc in the Ionian Sea, across Calabria. From NW to SE, the tomographic model shows abrupt variations of the velocity structure. In the back-arc system, particularly in the Vavilov and Marsili basins, OBS sections lack PmP-like arrivals and the velocity structure shows a continuous and strong vertical velocity gradient of 1 s-1. These results strongly support the presence of a basement made of exhumed mantle rocks. Between the Vavilov and Marsili basins, a relatively thick, low-velocity block is interpreted to be of continental affinity. The transition between Marsili Basin and Calabria is marked by a steep Moho geometry that shallows from SE to NW, revealing a dramatic crustal thinning along the N Calabrian margin. The lower crust of the margin has localized Vp of 7 km/s under the submarine volcanic arc. SE Calabria, the model shows a strong horizontal velocity gradient that is interpreted as the backstop of the subduction. In the Ionian, a 3-5 km thick sedimentary wedge thickens towards the NW. The frontal part of the wedge shows sub-vertical low-velocity anomalies indicating the presence of fluid-saturated large thrusts faults.

Seismic evidence for mass-transport deposits and BSR occurrence on the forearc region along the central Ryukyu Islands, Japan

NASA Astrophysics Data System (ADS)

Komatsu, Y.; Kobayashi, T.; Fujii, T.

2017-12-01

Mass-transport deposits (MTDs) are widely observed from many continental margins and are a significant component of both slope and basin-floor settings. Although MTDs are typically mud-prone, some MTDs above certain porosity thresholds can act as important hydrocarbon reservoirs. MTDs associated with gas hydrate occurrence in the Ulleung basin were documented. The recovery of gas hydrate by drilling and piston coring has confirmed the gas hydrate accumulations in the basin. Gas hydrate dissociation may have played a role in the slide-initiation at the Storegga Slide offshore Norway. In this study, to identify the gas hydrate reservoir potential of MTDs, we focus on seismic characteristics (seismic facies, attributes, and velocity) of MTDs associated with bottom simulating reflectors (BSR). Our study area is in the forearc region along the central Ryukyu Islands (southeast Japan). In this area, BSR have been widely observed. However, the studies were insufficient for the evaluation of gas hydrate due to poor-quality 2-D seismic data. We use high-quality 3-D seismic volumes in water depths ranging from approximately 150 to 2000 m between Okinawa Island and Miyako Island. BSR in the eastern region of the study area was interpreted within Neogene to Quaternary MTDs. Strata in MTDs are correlated with the upper Shimajiri group based on the characteristics of well data outside of the seismic exploration area and stratigraphy of land areas. The Shimajiri group is composed of homogeneous siltstone intercalated with lenticular, thin-bedded, fine sandstone. Their group is water-dissolved gas reservoir in Okinawa Island and Miyako Island. On our seismic data, MTDs are shown as chaotic, poorly discontinuous strata of low amplitude, partially continuous moderate- to high-amplitude reflections. The seismic velocity profile shows a relative increase in MTD intervals above the BSR, similar to gas hydrate-bearing sediments. It is also indicative of over-consolidation that was result of compression caused by slumping.

Multiple melting stages and refertilization as indicators for ridge to subduction formation: The New Caledonia ophiolite

NASA Astrophysics Data System (ADS)

Ulrich, Marc; Picard, Christian; Guillot, Stéphane; Chauvel, Catherine; Cluzel, Dominique; Meffre, Sébastien

2010-03-01

The origin of the New Caledonia ophiolite (South West Pacific), one of the largest in the world, is controversial. This nappe of ultramafic rocks (300 km long, 50 km wide and 2 km thick) is thrust upon a smaller nappe (Poya terrane) composed of basalts from mid-ocean ridges (MORB), back arc basins (BABB) and ocean islands (OIB). This nappe was tectonically accreted from the subducting plate prior and during the obduction of the ultramafic nappe. The bulk of the ophiolite is composed of highly depleted harzburgites (± dunites) with characteristic U-shaped bulk-rock rare-earth element (REE) patterns that are attributed to their formation in a forearc environment. In contrast, the origin of spoon-shaped REE patterns of lherzolites in the northernmost klippes was unclear. Our new major element and REE data on whole rocks, spinel and clinopyroxene establish the abyssal affinity of these lherzolites. Significant LREE enrichment in the lherzolites is best explained by partial melting in a spreading ridge, followed by near in-situ refertilization from deeper mantle melts. Using equilibrium melting equations, we show that melts extracted from these lherzolites are compositionally similar to the MORB of the Poya terrane. This is used to infer that the ultramafic nappe and the mafic Poya terrane represent oceanic lithosphere of a single marginal basin that formed during the late Cretaceous. In contrast, our spinel data highlights the strong forearc affinities of the most depleted harzburgites whose compositions are best modeled by hydrous melting of a source that had previously experienced depletion in a spreading ridge. The New Caledonian boninites probably formed during this second stage of partial melting. The two melting events in the New Caledonia ophiolite record the rapid transition from oceanic accretion to convergence in the South Loyalty Basin during the Late Paleocene, with initiation of a new subduction zone at or near the ridge axis.

Anaerobic Oxidation of Methane at a Marine Methane Seep in a Forearc Sediment Basin off Sumatra, Indian Ocean

PubMed Central

Siegert, Michael; Krüger, Martin; Teichert, Barbara; Wiedicke, Michael; Schippers, Axel

2011-01-01

A cold methane seep was discovered in a forearc sediment basin off the island Sumatra, exhibiting a methane-seep adapted microbial community. A defined seep center of activity, like in mud volcanoes, was not discovered. The seep area was rather characterized by a patchy distribution of active spots. The relevance of anaerobic oxidation of methane (AOM) was reflected by 13C-depleted isotopic signatures of dissolved inorganic carbon. The anaerobic conversion of methane to CO2 was confirmed in a 13C-labeling experiment. Methane fueled a vital microbial community with cell numbers of up to 4 × 109 cells cm−3 sediment. The microbial community was analyzed by total cell counting, catalyzed reporter deposition–fluorescence in situ hybridization (CARD–FISH), quantitative real-time PCR (qPCR), and denaturing gradient gel electrophoresis (DGGE). CARD–FISH cell counts and qPCR measurements showed the presence of Bacteria and Archaea, but only small numbers of Eukarya. The archaeal community comprised largely members of ANME-1 and ANME-2. Furthermore, members of the Crenarchaeota were frequently detected in the DGGE analysis. Three major bacterial phylogenetic groups (δ-Proteobacteria, candidate division OP9, and Anaerolineaceae) were abundant across the study area. Several of these sequences were closely related to the genus Desulfococcus of the family Desulfobacteraceae, which is in good agreement with previously described AOM sites. In conclusion, the majority of the microbial community at the seep consisted of AOM-related microorganisms, while the relevance of higher hydrocarbons as microbial substrates was negligible. PMID:22207865

Anaerobic Oxidation of Methane at a Marine Methane Seep in a Forearc Sediment Basin off Sumatra, Indian Ocean.

PubMed

Siegert, Michael; Krüger, Martin; Teichert, Barbara; Wiedicke, Michael; Schippers, Axel

2011-01-01

A cold methane seep was discovered in a forearc sediment basin off the island Sumatra, exhibiting a methane-seep adapted microbial community. A defined seep center of activity, like in mud volcanoes, was not discovered. The seep area was rather characterized by a patchy distribution of active spots. The relevance of anaerobic oxidation of methane (AOM) was reflected by (13)C-depleted isotopic signatures of dissolved inorganic carbon. The anaerobic conversion of methane to CO(2) was confirmed in a (13)C-labeling experiment. Methane fueled a vital microbial community with cell numbers of up to 4 × 10(9) cells cm(-3) sediment. The microbial community was analyzed by total cell counting, catalyzed reporter deposition-fluorescence in situ hybridization (CARD-FISH), quantitative real-time PCR (qPCR), and denaturing gradient gel electrophoresis (DGGE). CARD-FISH cell counts and qPCR measurements showed the presence of Bacteria and Archaea, but only small numbers of Eukarya. The archaeal community comprised largely members of ANME-1 and ANME-2. Furthermore, members of the Crenarchaeota were frequently detected in the DGGE analysis. Three major bacterial phylogenetic groups (δ-Proteobacteria, candidate division OP9, and Anaerolineaceae) were abundant across the study area. Several of these sequences were closely related to the genus Desulfococcus of the family Desulfobacteraceae, which is in good agreement with previously described AOM sites. In conclusion, the majority of the microbial community at the seep consisted of AOM-related microorganisms, while the relevance of higher hydrocarbons as microbial substrates was negligible.

Evolution of fore-arc and back-arc sedimentary basins with focus on the Japan subduction system and its analogues

NASA Astrophysics Data System (ADS)

Sato, Hiroshi; Ishiyama, Tatsuya; Matenco, Liviu; Nader, Fadi Henri

2017-07-01

The International Lithosphere Program (ILP) seeks to elucidate the nature, dynamics, origin and evolution of the lithosphere through international, multidisciplinary geoscience research projects and coordinating committees (Cloetingh and Negendank, 2010). The focus of the Task Force VI Sedimentary Basins activities is to foster collaborations between academia, research institutes and industry in all domains relevant for the understanding of sedimentary basins, from regional to nano-scale, from the deep earth to near surface processes (e.g., Roure et al., 2010, 2013). In this activity, it is important to develop and validate novel concepts of sedimentary basin evolution and topography building by incorporating geological/geophysical datasets and methodologies applied to worldwide natural laboratories (Cloetingh et al., 2011; Cloetingh and Willett, 2013; Matenco and Andriessen, 2013). The Task Force aims to understand and predict the processes that control the formation and evolution of the coupled orogens and sedimentary basins system through integration of field studies, analytical techniques and numerical/analogue modelling. At the same time, the Task Force aims to promote research in the domain of sedimentary basins evolution and quantitative tectonics for the study of mountain building and the subsequent extensional collapse, and their quantitative implications for vertical motions on different temporal and spatial scales (Gibson et al., 2015; Matenco et al., 2016; Roure, 2008; Seranne et al., 2015). The implications of tectonics on basin fluids (fluid-flow and rock-fluid interactions) are important to understand and predict geo-resources (e.g., Nader, 2016). Important is to initiate innovative research lines in linking the evolution of sedimentary systems by integrating cross-disciplinary expertise with a focus on integrated sedimentary basins and orogenic evolution. The key is to strengthen the synergy between academic research and applied industry in large (inter)national interdisciplinary research networks able to tackle complex problems at integrated system level.

Structure and seismic activity of the Lesser Antilles subduction zone

NASA Astrophysics Data System (ADS)

Evain, M.; Galve, A.; Charvis, P.; Laigle, M.; Ruiz Fernandez, M.; Kopp, H.; Hirn, A.; Flueh, E. R.; Thales Scientific Party

2011-12-01

Several active and passive seismic experiments conducted in 2007 in the framework of the European program "Thales Was Right" and of the French ANR program "Subsismanti" provided a unique set of geophysical data highlighting the deep structure of the central part of the Lesser Antilles subduction zone, offshore Dominica and Martinique, and its seismic activity during a period of 8 months. The region is characterized by a relatively low rate of seismicity that is often attributed to the slow (2 cm/yr) subduction of the old, 90 My, Atlantic lithosphere beneath the Caribbean Plate. Based on tomographic inversion of wide-angle seismic data, the forearc can clearly be divided into an inner forearc, characterised by a high vertical velocity gradient in the igneous crust, and an outer forearc with lower crustal velocity gradient. The thick, high velocity, inner forearc is possibly the extension at depth of the Mesozoic Caribbean crust outcropping in La Désirade Island. The outer forearc, up to 70 km wide in the northern part of the study area, is getting narrower to the south and disappears offshore Martinique. Based on its seismic velocity structure with velocities higher than 6 km/s the backstop consists, at least partly, of magmatic rocks. The outer forearc is also highly deformed and faulted within the subducting trend of the Tiburon Ridge. With respect to the inner forearc velocity structure the outer forearc basement could either correspond to an accreted oceanic terrane or made of highly fractured rocks. The inner forearc is a dense, poorly deformable crustal block, tilted southward as a whole. It acts as a rigid buttress increasing the strain within both the overriding and subducting plates. This appears clearly in the current local seismicity affecting the subducting and the overriding plates that is located beneath the inner forearc. We detected earthquakes beneath the Caribbean forearc and in the Atlantic oceanic plate as well. The main seismic activity is concentrated in the lower crust and in the mantle wedge, close to the island arc beneath the inner forearc domain. In comparison, little seismicity is observed beneath the outer forearc domain. We propose that the difference of the seismicity beneath the inner and the outer forearc is related to a difference of crustal structure between the inner forearc interpreted as a dense, thick and rigid crustal block and the lighter and more flexible outer forearc. Seismicity is enhanced beneath the inner forearc because it likely increases the vertical stress applied to the subducting plate. At depth, interplate earthquakes observed between 35 and 45 km depth, deeper than the Moho of the forearc (~30 km), possibly reveal the downdip limit of the seismogenic zone. The Thales Scientific Party is composed of: Bayrakci, G., Bécel, A., Charvis, P., Diaz, J., Evain, M., Flueh, E., Gallart, J., Gailler, A., Galve, A., Hello, Y., Hirn, A., Kopp, H., Krabbenhoeft, A., Laigle, M., Lebrun, J. F., Monfret, T., Papenberg, C., Planert, L., Ruiz, M., Sapin, M., Weinzierl, W.

Prolonged extension and subsidence of the Peruvian forearc during the Cenozoic

NASA Astrophysics Data System (ADS)

Viveen, Willem; Schlunegger, Fritz

2018-04-01

Ocean-continental subduction zones are commonly associated with compressional stress fields, which ultimately result in regional uplift of the overriding plate. This has particularly been inferred by most studies for the western margin of the Peruvian Andes. However, local geological observations have contested this idea. Here, we present a review of existing local and international literature supplemented by new structural and geomorphic observations that suggest that nearly the entire central (15° to 11° S latitude) and northern Peruvian forearc (11° to 6° S latitude) are under extension with a slight tendency to transtension instead of compression, and that this region has experienced a prolonged period of subsidence since the middle-late Eocene, interrupted by short pulses of uplift. In contrast, the southern Peruvian forearc (15° to 18° S latitude) has experienced (trans)tension from the middle-late Eocene until recent in combination with uplift. The central and southern Peruvian forearc that was influenced by the passage of the Nazca ridge experienced transtension and subsidence until the middle-late Miocene and alternating phases of compressional and transtensional tectonics afterwards. These new findings on the geodynamic development of the Peruvian forearc need to be considered in future reconstructions of the mechanisms at work within this subduction zone.

Circum-Pacific accretion of oceanic terranes to continental blocks: accretion of the Early Permian Dun Mountain ophiolite to the E Gondwana continental margin, South Island, New Zealand

NASA Astrophysics Data System (ADS)

Robertson, Alastair

2016-04-01

Accretionary orogens, in part, grow as a result of the accretion of oceanic terranes to pre-existing continental blocks, as in the circum-Pacific and central Asian regions. However, the accretionary processes involved remain poorly understood. Here, we consider settings in which oceanic crust formed in a supra-subduction zone setting and later accreted to continental terranes (some, themselves of accretionary origin). Good examples include some Late Cretaceous ophiolites in SE Turkey, the Jurassic Coast Range ophiolite, W USA and the Early Permian Dun Mountain ophiolite of South Island, New Zealand. In the last two cases, the ophiolites are depositionally overlain by coarse clastic sedimentary rocks (e.g. Permian Upukerora Formation of South Island, NZ) that then pass upwards into very thick continental margin fore-arc basin sequences (Great Valley sequence, California; Matai sequence, South Island, NZ). Field observations, together with petrographical and geochemical studies in South Island, NZ, summarised here, provide evidence of terrane accretion processes. In a proposed tectonic model, the Early Permian Dun Mountain ophiolite was created by supra-subduction zone spreading above a W-dipping subduction zone (comparable to the present-day Izu-Bonin arc and fore arc, W Pacific). The SSZ oceanic crust in the New Zealand example is inferred to have included an intra-oceanic magmatic arc, which is no longer exposed (other than within a melange unit in Southland), but which is documented by petrographic and geochemical evidence. An additional subduction zone is likely to have dipped westwards beneath the E Gondwana margin during the Permian. As a result, relatively buoyant Early Permian supra-subduction zone oceanic crust was able to dock with the E Gondwana continental margin, terminating intra-oceanic subduction (although the exact timing is debatable). The amalgamation ('soft collision') was accompanied by crustal extension of the newly accreted oceanic slab, and also resulted in the formation of the overlying Maitai continental margin fore-arc basin (possibly related to rollback or a decrease in dip of the remaining subduction zone).Very coarse clastic material (up to ca. 700 m thick) including detached blocks of basaltic and gabbroic rocks, up to tens or metres in size (or more), was shed down fault scarps from relatively shallow water into a deeper water setting by gravity flow processes, ranging from rock fall, to debris flow, to turbidity currents. In addition, relatively fine-grained volcaniclastic-terrigenous sediment was input from an E Gondwana continental margin arc in the form of distal gravity flows, as indicated by geochemical data (e.g. Rare Earth Element analysis of sandstones and shales). The lowest part of the overlying Maitai fore-arc sequence in some areas is represented by hundreds of metres-thick sequences of mixed carbonate-volcaniclastic-terrigenous gravity flows (Wooded Peak Fm.), which are interpreted to have been derived from the E Gondwana continental margin and which finally accumulated in fault-controlled depocentres. Input of shallow-water carbonate material later waned and the Late Permian-Triassic Maitai fore-arc basin was dominated by gravity flows that were largely derived from a contemporaneous continental margin arc (partially preserved in present SE Australia). Subsequent tectonic deformation included on-going subduction, strike-slip and terrane accretion. The sedimentary covers of comparable accreted ophiolites elsewhere (e.g. Coast Range ophiolite, California) may reveal complementary evidence of fundamental terrane accretion processes. Acknowledgements: Hamish Campbell, Dave Craw, Mike Johnson, Chuck Landis, Nick Mortimer, Dhana Pillai and other members of the South Island geological research community

Reconnaissance stratigraphic studies in the Susitna basin, Alaska, during the 2014 field season

USGS Publications Warehouse

LePain, David L.; Stanley, Richard G.; Harun, Nina T.; Helmold, Kenneth P.; Tsigonis, Rebekah

2015-01-01

The Susitna basin is a poorly-understood Cenozoic successor basin immediately north of Cook Inlet in south-central Alaska (Kirschner, 1994). The basin is bounded by the Castle Mountain fault and Cook Inlet basin on the south, the Talkeetna Mountains on the east, the Alaska Range on the north, and the Alaska–Aleutian Range on the west (fig. 2-1). The Cenozoic fill of the basin includes coal-bearing nonmarine rocks that are partly correlative with Paleogene strata in the Matanuska Valley and Paleogene and Neogene formations in Cook Inlet (Stanley and others, 2013, 2014). Mesozoic sedimentary rocks are present in widely-scattered uplifts in and around the margins of the basin; these rocks differ significantly from Mesozoic rocks in the forearc basin to the south. Mesozoic strata in the Susitna region were likely part of a remnant ocean basin that preceded the nonmarine Cenozoic basin (Trop and Ridgway, 2007). The presence of coal-bearing strata similar to units that are proven source rocks for microbial gas in Cook Inlet (Claypool and others, 1980) suggests the possibility of a similar system in the Susitna basin (Decker and others, 2012). In 2011 the Alaska Division of Geological & Geophysical Surveys (DGGS) and Alaska Division of Oil and Gas, in collaboration with the U.S. Geological Survey, initiated a study of the gas potential of the Susitna basin (Gillis and others, 2013). This report presents a preliminary summary of the results from 14 days of helicopter-supported field work completed in the basin in August 2014. The goals of this work were to continue the reconnaissance stratigraphic work begun in 2011 aimed at understanding reservoir and seal potential of Tertiary strata, characterize the gas source potential of coals, and examine Mesozoic strata for source and reservoir potential

Thermal evolution of sedimentary basins in Alaska

USGS Publications Warehouse

Johnsson, Mark J.; Howell, D.G.

1996-01-01

The complex tectonic collage of Alaska is reflected in the conjunction of rocks of widely varying thermal maturity. Indicators of the level of thermal maturity of rocks exposed at the surface, such as vitrinite reflectance and conodont color alteration index, can help constrain the tectonic evolution of such complex regions and, when combined with petrographic, modern heat flow, thermogeochronologic, and isotopic data, allow for the detailed evaluation of a region?s burial and uplift history. We have collected and assembled nearly 10,000 vitrinite-reflectance and conodont-color-alteration index values from the literature, previous U.S. Geological Survey investigations, and our own studies in Alaska. This database allows for the first synthesis of thermal maturity on a broadly regional scale. Post-accretionary sedimentary basins in Alaska show wide variability in terms of thermal maturity. The Tertiary interior basins, as well as some of the forearc and backarc basins associated with the Aleutian Arc, are presently at their greatest depth of burial, with immature rocks exposed at the surface. Other basins, such as some backarc basins on the Alaska Peninsula, show higher thermal maturities, indicating modest uplift, perhaps in conjunction with higher geothermal gradients related to the arc itself. Cretaceous ?flysch? basins, such as the Yukon-Koyukuk basin, are at much higher thermal maturity, reflecting great amounts of uplift perhaps associated with compressional regimes generated through terrane accretion. Many sedimentary basins in Alaska, such as the Yukon-Koyukuk and Colville basins, show higher thermal maturity at basin margins, perhaps reflecting greater uplift of the margins in response to isostatic unloading, owing to erosion of the hinterland adjacent to the basin or to compressional stresses adjacent to basin margins.

P-wave velocity structure offshore central Sumatra: implications for compressional and strike-slip faulting

NASA Astrophysics Data System (ADS)

Karplus, M.; Henstock, T.; McNeill, L. C.; Vermeesch, P. M. T.; Barton, P. J.

2014-12-01

The Sunda subduction zone features significant along-strike structural variability including changes in accretionary prism and forearc morphology. Some of these changes have been linked to changes in megathrust faulting styles, and some have been linked to other thrust and strike-slip fault systems across this obliquely convergent margin (~54-58 mm/yr convergence rate, 40-45 mm/yr subduction rate). We examine these structural changes in detail across central Sumatra, from Siberut to Nias Island, offshore Indonesia. In this area the Investigator Fracture Zone and the Wharton Fossil Ridge, features with significant topography, are being subducted, which may affect sediment thickness variation and margin morphology. We present new seismic refraction P-wave velocity models using marine seismic data collected during Sonne cruise SO198 in 2008. The experiment geometry consisted of 57 ocean bottom seismometers, 23 land seismometers, and over 10,000 air gun shots recorded along ~1750 km of profiles. About 130,000 P-wave first arrival refractions were picked, and the picks were inverted using FAST (First Arrivals Refraction Tomography) 3-D to give a velocity model, best-resolved in the top 25 km. Moho depths, crustal composition, prism geometry, slab dip, and upper and lower plate structures provide insight into the past and present tectonic processes at this plate boundary. We specifically examine the relationships between velocity structure and faulting locations/ styles. These observations have implications for strain-partitioning along the boundary. The Mentawai Fault, located west of the forearc basin in parts of Central Sumatra, has been interpreted variably as a backthrust, strike-slip, and normal fault. We integrate existing data to evaluate these hypotheses. Regional megathrust earthquake ruptures indicate plate boundary segmentation in our study area. The offshore forearc west of Siberut is almost aseismic, reflecting the locked state of the plate interface, which last ruptured in 1797. The weakly-coupled Batu segment experiences sporadic clusters of events near the forearc slope break. The Nias segment in the north ruptured in the 2005 M8.7 earthquake. We compare P-wave velocity structure to the earthquake data to examine potential links between lithospheric structure and seismogenesis.

Segmentation of the Cascadia Forearc in Southwestern Washington—Evidence from New Potential-Field Data

NASA Astrophysics Data System (ADS)

Blakely, R. J.; Wells, R. E.; Sherrod, B. L.; Brocher, T. M.

2016-12-01

Newly acquired potential-field data, geologic mapping, and recorded seismicity indicate that the Cascadia subduction zone is segmented in southwestern Washington by a left-stepping, possibly active crustal structure spanning nearly the entire onshore portion of the forearc. The east-striking, southward verging Doty thrust fault is an important part of this trans-forearc structure. As mapped, the eastern end of the 50-km-long Doty fault connects with the northwestern termination of ongoing seismicity on the north-northwest-striking Mt. St. Helens seismic zone (MSHSZ), suggesting that the Doty fault and MSHSZ may be kinematically linked. Westward, the mapped Doty fault terminates at and may link to mapped faults striking northwestward to 35 km north of Grays Harbor, a total northwest distance of 85 km. A newly acquired aeromagnetic survey over the Doty fault and MSHSZ, and existing gravity data, emphasize Crescent Formation and other Eocene volcanic rocks in the hanging wall of the Doty fault with up to 4 km of vertical throw. Most MSHSZ epicenters fall within a broad (5- to 10-km wide) magnetic low extending 50 km north-northwestward from Mt. St Helens. The magnetic low skirts around the western margin of the Miocene-age Spirit Lake pluton, but otherwise is not obviously associated with topography or mapped geology. We suggest that dextral slip on the MSHSZ is distributed across a broad, northwest-striking area that includes the magnetic low and is transferred to compressional slip on the Doty fault. The Doty fault demarcates a clear north-to-south decrease in the density of episodic tremor, suggesting that the thrust fault may intersect or modulate over-pressured fluids generated above the slab (Wells et al., in review). The Doty fault, MSHSZ, and neighboring structures are consistent with a dextral shear couple (Wells and Coe, 1985) and consequent clockwise crustal rotation extending across the entire landward portion of the Cascadia forearc, from the Pacific Coast to the Cascadia arc and from Grays Harbor to the Portland basin in northwestern Oregon.

Deformation History of the Haymana Basin: Structural Records of Closure-Collision and Subsequent Convergence (Indentation) Events at the North-Central Neotethys (Central Anatolia, Turkey)

NASA Astrophysics Data System (ADS)

Gülyüz, Erhan; Özkaptan, Murat; Kaymakcı, Nuretdin

2016-04-01

Gondwana- (Tauride Platfrom and Kırşehir Block) and Eurasia (Pontides) - derived continental blocks bound the Haymana basin, in the south and north, respectively. Boundaries between these blocks are signed by İzmir-Ankara-Erzincan and debatable Intra-Tauride Suture zones which are straddled by the Haymana Basin in the region. In this regard, deformation recorded in the upper Cretaceous to middle Eocene deposits of the basin is mainly controlled by the relative movements of these blocks. Therefore, understanding the structural evolution of the Haymana Basin in a spatio-temporal concept is crucial to shed some light on some debatable issues such as ; (1) timing of late stage subduction histories of various branches of Neotethys and subsequent collision events, (2) effects of post-collisional tectonic activity in the Haymana region. Fault kinematic analyses (based on 623 fault-slip data from 73 stations) indicate that the basin was subjected to initially N-S to NNE-SSW extension until middle Paleocene and then N-S- to NNE-SSW- directed continuous compression and coeval E-W to ESE-WNW extension up to middle Miocene. These different deformation phases correspond to the fore-arc (closure) and foreland (collision and further convergence) stages of the basin. Additionally, fold analyses (based on 1017 bedding attitudes) and structural mapping studies show that development of folds and major faults are coeval and they can be explained by principle stress orientations of the second deformation phase. The Haymana basin is, based on the trends of E-W- and WNW-ESE- directed structures at the south-eastern and the north-western parts of the basin, respectively, divided into two structural segments. The balanced cross-sections also indicate ~4% and ~25% shortening at the north-western and south-eastern segments, respectively. The differences in amounts of shortenings are explained by reduce in effectiveness zone of basin-bounding thrust faults towards west. On the other hand, the boundary of the segments is defined as an intra-basinal strike-slip system which is thought to be developed together with late stage activities of the basin bounding thrust (or reverse) faults (Dereköy and İnler faults) in response to the north-westward movement of the northern segment of the Kırşehir block. It is proposed that the Haymana basin was initially evolved under the influences of subduction related extensional setting until middle Paleocene, and latterly foreland settings in front of a south-vergent fold and thrust belt developed during collision and post-collisional convergence until middle Miocene. Additionally, the north-westward movement and indentation of the Kırşehir Block caused structural segmentation and rotation events in the basin.

A Subduction Factory Laboratory: Tectonics of the Southern Mariana Convergent Margin

NASA Astrophysics Data System (ADS)

Fryer, P.; Martinez, F.; Becker, N.; Appelgate, B.; Hawkins, J.; Ishihara, T.

2001-12-01

Recent MR-1 side-scan sonar mapping, gravity and magnetics surveys, and sea floor sampling of the southernmost portion of the Mariana region reveal a convergent margin subject to complexly interacting stresses. The backarc spreading center and the crust it has produced is inflated as a consequence of proximity of the arc and backarc basin magma sources. The formation of backarc basin crust dates from only 3 m.y. ago based on interpretations of magnetics data. The westward extension of the more recent arc volcanic centers beyond Guam shows a general diminishing of arc volcanic centers and a coalescing with the spreading center in a zone of transition from magmatic to amagmatic extension. Magnetic and gravity data are consistent with this tectonic interpretation. It is possible, however, that newly imaged volcanoes on the West Mariana ridge may be active. They show high-backscatter characteristics on sonar imagery and coincide with the typical depths to slab for magma generation in subduction zones. The distance to trench axis and the level of seismic activity in the region is consistent with volcanic activity on this portion of the "remnant arc." If our hypothesis is correct, then the southern Mariana system preserves the transition from remnant arc through extension and formation of a backarc basin spreading center, to the reestablishment of a new active volcanic arc. It thus provides a natural laboratory for the simultaneous study of all of the fundamental processes of the Subduction Factory. In addition, the forearc is deeply dissected by profound faulting that exposes the structure of the arc massif along faults with throws of up to 4 km. There are several stair-stepping antithetic normal faults in the forearc south of Guam that expose intermediate depth (up to approximately 15 km) plutonics of arc origin, providing a potential record of the most complete crustal section through the arc substructure known to be exposed in an active arc. Finally, the deeply-excised forearc of the southeastern corner of the system is underlain by a subducting plate that has likely been torn, which dips more steeply to the west of the proposed tear, and which may thus provide an excellent location for the study of mantle flow in association with disruption of subducting slabs. Pacific mantle may be leaking westward past the slab, invading the backarc region. The backarc magmas of the Izu-Bonin-Mariana system have been characterized as of Indian Ocean mantle composition. The rapid rate of volcanism along the southern backarc spreading center may make it possible to trace the incursion rate of Pacific mantle across this boundary.

Eclogite-facies metamorphism in impure marble from north Qaidam orogenic belt: Geodynamic implications for early Paleozoic continental-arc collision

NASA Astrophysics Data System (ADS)

Chen, Xin; Xu, Rongke; Schertl, Hans-Peter; Zheng, Youye

2018-06-01

In the North Qaidam ultrahigh-pressure (UHP) metamorphic belt, impure marble and interbedded eclogite represent a particular sedimentary provenance and tectonic setting, which have important implications for a controversial problem - the dynamic evolution of early Paleozoic subduction-collision complexes. In this contribution, detailed field work, mineral chemistry, and whole-rock geochemistry are presented for impure marble to provide the first direct evidence for the recycling of carbonate sediments under ultrahigh-pressures during subduction and collision in the Yuka terrane, in the North Qaidam UHP metamorphic belt. According to conventional geothermobarometry, pre-peak subduction to 0.8-1.3 GPa/485-569 °C was followed by peak UHP metamorphism at 2.5-3.3 GPa/567-754 °C and cooling to amphibolite facies conditions at 0.6-0.7 GPa/571-589 °C. U-Pb dating of zircons from impure marble reveals a large group with ages ranging from 441 to 458 Ma (peak at 450 Ma), a smaller group ranging from 770 to 1000 Ma (peak at 780 Ma), and minor >1.8 Ga zircon aged ca. 430 Ma UHP metamorphism. The youngest detrital zircons suggest a maximum depositional age of ca. 442 Ma and a burial rate of ca. 1.0-1.1 cm/yr when combined with P-T conditions and UHP metamorphic age. The REE and trace element patterns of impure marble with positive Sr and U anomalies, negative high field strength elements (Nb, Ta, Zr, Hf, and Ti), and Ce anomalies imply that the marble had a marine limestone precursor. Impure marble intercalated with micaschist and eclogite was similar to limestone and siltstone protoliths deposited in continental fore-arc or arc setting with basic volcanic activity. Therefore, the Yuka terrane most likely evolved in a continental island arc setting during the Paleozoic. These data suggest that metasediments were derived from a mixture of Proterozoic continental crust and juvenile early Paleozoic oceanic and/or island arc crust. In addition, their protoliths were likely deposited in a terrigenous-dominated forearc marine basin rather than an intracontinental basin environment, further evidence that some continental arc volcanic rock may have been the source of eclogite in the North Qaidam. These sediments, formed in a forearc basin close to the Qaidam Block to the north, were transported in the subduction zone to 100-110 km depth with UHP metamorphism prior to exhumation. Meanwhile, the new results suggest that subduction erosion occurred along the active continental margin during the Qaidam Block with north-dipping subduction, indicating that the North Qaidam UHP metamorphic belt may have formed during continental-arc collision.

Synorogenic Extensional Tectonics in the Forearc, Arc and Southwest Altiplano of Southern Peru

NASA Astrophysics Data System (ADS)

Sempere, T.; Jacay, J.

2007-05-01

There is increasing evidence that paradigms, as in many fields of science, deeply influence interpretations and even observations of the actual geology of the Andes, to the point that some same areas have be mapped in dramatically different ways by geologists who favored distinct models. The belief that the Central Andes originated by tectonic shortening has commonly biased cartography in this orogen, for instance by forcing high-angle or poorly-exposed faults to be mapped as reverse faults and thrusts. Extensional structures have often been overlooked, because they were thought to be irrelevant in the investigation of orogenic issues. However, observations and models from a variety of undoubtedly extensional settings in Europe and Africa have recently shown that some structural geometries previously thought to be typical of contractional processes, as in the Central Andes, in fact also occur in extensional contexts, in particular where normal faults were initiated as flexure-forming blind faults. Traditional mapping in the Central Andes has therefore to be re-evaluated. Identification and correction of such biases result in major revisions of structural mapping in southwestern Peru. The forearc, arc, and SW Altiplano of southern Peru in fact appear to have been dominated by extension and transcurrence since ~30 Ma, in contrast with the NE Altiplano, Eastern Cordillera, and sub-Andean belt, where shortening has been indeed significant. These two contrasting orogenic domains are separated by the SFUACC fault system, which corresponds to a major lithospheric boundary. Basins SW of the SFUACC formed in extension and along transcurrent faults. At least one low-angle extensional detachment, placing near-vertical Miocene conglomerates over a Cretaceous unit, occurs just west of Lake Titicaca. Other detachments occur in the forearc. Significant transcurrent faulting, including transpressional deformation, developed along specific structures over southern Peru. SW of the SFUACC, undisputable reverse faults are rare, but are common along the lower slope of the Pacific Andean escarpment, suggesting incipient oceanward gravitational collapse of the Western Cordillera. We find that extension has accompanied the Andean orogeny SW of the SFUACC, and therefore question the currently dominant paradigm.

Fore arc tectonothermal evolution of the El Oro metamorphic province (Ecuador) during the Mesozoic

NASA Astrophysics Data System (ADS)

Riel, Nicolas; Martelat, Jean-Emmanuel; Guillot, Stéphane; Jaillard, Etienne; Monié, Patrick; Yuquilema, Jonatan; Duclaux, Guillaume; Mercier, Jonathan

2014-10-01

The El Oro metamorphic province of SW Ecuador is a composite massif made of juxtaposed terranes of both continental and oceanic affinity that has been located in a fore-arc position since Late Paleozoic times. Various geochemical, geochronological, and metamorphic studies have been undertaken on the El Oro metamorphic province, providing an understanding of the origin and age of the distinct units. However, the internal structures and geodynamic evolution of this area remain poorly understood. Our structural analysis and thermal modeling in the El Oro metamorphic province show that this fore-arc zone underwent four main geological events. (1) During Triassic times (230-225 Ma), the emplacement of the Piedras gabbroic unit at crustal-root level ( 9 kbar) triggered partial melting of the metasedimentary sequence under an E-W extensional regime at pressure-temperature conditions ranging from 4.5 to 8.5 kbar and from 650 to 900°C for the migmatitic unit. (2) At 226 Ma, the tectonic underplating of the Arenillas-Panupalí oceanic unit (9 kbar and 300°C) thermally sealed the fore-arc region. (3) Around the Jurassic-Cretaceous boundary, the shift from trench-normal to trench-parallel subduction triggered the exhumation and underplating of the high-pressure, oceanic Raspas Ophiolitic Complex (18 kbar and 600°C) beneath the El Oro Group (130-120 Ma). This was followed by the opening of a NE-SW pull-apart basin, which tilted the massif along an E-W subhorizontal axis (110 Ma). (4) In Late Cretaceous times, an N-S compressional event generated heterogeneous deformation due to the presence of the Cretaceous Celica volcanic arc, which acted as a buttress and predominantly affected the central and eastern part of the massif.

Sedimentary and tectonic evolution of the southern Qiangtang basin: Implications for the Lhasa-Qiangtang collision timing

NASA Astrophysics Data System (ADS)

Ma, Anlin; Hu, Xiumian; Garzanti, Eduardo; Han, Zhong; Lai, Wen

2017-07-01

The Mesozoic stratigraphic record of the southern Qiangtang basin in central Tibet records the evolution and closure of the Bangong-Nujiang ocean to the south. The Jurassic succession includes Toarcian-Aalenian shallow-marine limestones (Quse Formation), Aalenian-Bajocian feldspatho-litho-quartzose to feldspatho-quartzo-lithic sandstones (shallow-marine Sewa Formation and deep-sea Gaaco Formation), and Bathonian outer platform to shoal limestones (Buqu Formation). This succession is truncated by an angular unconformity, overlain by upper Bathonian to lower Callovian fan-delta conglomerates and litho-quartzose to quartzo-lithic sandstones (Biluoco Formation) and Callovian shoal to outer platform limestones (Suowa Formation). Sandstone petrography coupled with detrital-zircon U-Pb and Hf isotope analysis indicate that the Sewa and Gaaco formations contain intermediate to felsic volcanic detritus and youngest detrital zircons (183-170 Ma) with ɛHf(t) ranging widely from +13 to -25, pointing to continental-arc provenance from igneous rocks with mixed mantle and continental-crust contributions. An arc-trench system thus developed toward the end of the Early Jurassic, with the southern Qiangtang basin representing the fore-arc basin. Above the angular unconformity, the Biluoco Formation documents a change to dominant sedimentary detritus including old detrital zircons (mainly >500 Ma ages in the lower part of the unit) with age spectra similar to those from Paleozoic strata in the central Qiangtang area. A major tectonic event with intense folding and thrusting thus took place in late Bathonian time (166 ± 1 Ma), when the Qiangtang block collided with another microcontinental block possibly the Lhasa block.

Subduction, erosion and the sediment record: Insights from Miocene sediments, Hengchun Peninsula, Taiwan

NASA Astrophysics Data System (ADS)

Kirstein, Linda; Carter, Andrew; Chen, Yue-Gau

2010-05-01

Detrital sedimentary records include vast archives of material that have been removed from developing tectonically active regions. These archives have been used to investigate challenging questions on continental deformation, exhumation and palaeodrainage using a variety of different techniques including heavy minerals, fission-track dating and palaeocurrent reconstructions. The Hengchun Peninsula of southern Taiwan and offshore Hengchun Ridge form a present day accretionary prism, with accretionary wedge growth occurring both by frontal accretion, with sediments from the continental margin scraped up into the accretionary wedge and by underplating. Miocene sediments in Hengchun include foreland basin deposits, deep marine turbidites and forearc basin deposits. As a result the detrital sediments record details of accretionary prism growth associated with continued Luzon arc-continent collision. Diametrically opposite palaeocurrents are preserved in the Miocene sandstones of the Hengchun Peninsula, southern Taiwan. Controversial explanations include an exotic source terrane to the south and/or 180 ° rotation of a depositional basin. We document the tecto-thermal evolution of the Miocene sediment source(s) using a double dating approach. U-Pb grain ages range from Miocene to Archaean, while zircon fission-tracks record thermal cooling primarily in the Cretaceous with minor peaks in the Miocene, Triassic, Jurassic and Permian. The primary source of the Miocene sediments at the centre of the controversy was similar. Palaeocurrent data are influenced by local basin geometry and submarine topography and suggest that sediment deposition in the Miocene was strongly controlled by incipient subduction, associated structural trends and submarine topography. A similar control on deposition in the modern Taiwan collision zone is apparent in the offshore region today.

National Gas Hydrate Program Expedition 01 offshore India; gas hydrate systems as revealed by hydrocarbon gas geochemistry

USGS Publications Warehouse

Lorenson, Thomas; Collett, Timothy S.

2018-01-01

The National Gas Hydrate Program Expedition 01 (NGHP-01) targeted gas hydrate accumulations offshore of the Indian Peninsula and along the Andaman convergent margin. The primary objectives of coring were to understand the geologic and geochemical controls on the accumulation of methane hydrate and their linkages to underlying petroleum systems. Four areas were investigated: 1) the Kerala-Konkan Basin in the eastern Arabian Sea, 2) the Mahanadi and 3) Krishna-Godavari Basins in the western Bay of Bengal, and 4) the Andaman forearc Basin in the Andaman Sea.Upward flux of methane at three of the four of the sites cored during NGHP-01 is apparent from the presence of seafloor mounds, seismic evidence for upward gas migration, shallow sub-seafloor geochemical evidence of methane oxidation, and near-seafloor gas composition that resembles gas from depth.The Kerala-Konkan Basin well contained only CO2 with no detectable hydrocarbons suggesting there is no gas hydrate system here. Gas and gas hydrate from the Krishna-Godavari Basin is mainly microbial methane with δ13C values ranging from −58.9 to −78.9‰, with small contributions from microbial ethane (−52.1‰) and CO2. Gas from the Mahanadi Basin was mainly methane with lower concentrations of C2-C5 hydrocarbons (C1/C2 ratios typically >1000) and CO2. Carbon isotopic compositions that ranged from −70.7 to −86.6‰ for methane and −62.9 to −63.7‰ for ethane are consistent with a microbial gas source; however deeper cores contained higher molecular weight hydrocarbon gases suggesting a small contribution from a thermogenic gas source. Gas composition in the Andaman Basin was mainly methane with lower concentrations of ethane to isopentane and CO2, C1/C2 ratios were mainly >1000 although deeper samples were <1000. Carbon isotopic compositions range from −65.2 to −80.7‰ for methane, −53.1 to −55.2‰ for ethane is consistent with mainly microbial gas sources, although one value recorded of −35.4‰ for propane suggests a thermogenic source. Gas hydrate accumulations in the Krishna-Godavari and Mahanadi Basins are the result of a microbially sourced gas hydrate system. The system is enhanced by the migration of microbial gas from surrounding areas through pathways including high-porosity delta sands, shale diapirism, faulting and folding of sediment due to the local processes associated with rapid sediment deposition, sediment overpressure, and the recycling of methane from a rapidly upward moving gas hydrate stability zone. The gas hydrate system in the Andaman Basin is less well constrained due to lack of exploration and occurs in a forearc basin. Each of these hydrate-bearing systems overlies and is likely supported by the presence and possible migration of gas from deeper gas-prone petroleum systems currently generating thermogenic hydrocarbons at much greater depths.

Uplift Patterns in the Forearc of the Middle America Trench, Costa Rica: Implications for Mass Balance and Fore-arc Kinematics

NASA Astrophysics Data System (ADS)

Fisher, D. M.; Gardner, T. W.; Sak, P.; Marshall, J. S.; Protti, M.

2001-12-01

Uplift patterns along the Pacific Coast of Costa Rica provide insight into the balance of mass in the fore arc and depict an inner forearc that thickens nonuniformly at the expense of a subsiding margin wedge. Offshore, incoming seamounts and ridges on the subducting Cocos plate result in embayment of the trench axis and scarring that reflects downdropping of fault bounded blocks in the wake of subducting seamounts. The upper slope displays a regional unconformity that records late Tertiary subsidence and arcward displacement of the trench axis. Uplifted marine wavecut benches along the coast of Costa Rica, combined with analysis of fault populations, indicate that the inner fore arc has experienced a history that is in marked contrast to the subsidence and erosion observed in the margin wedge. Regionally, the inner forearc, from Osa to Nicaragua, has experienced uplift. One way to produce this regional uplift signal is movement on an out-of-sequence fault, or an active fault arcward of the frontal thrust. The longitudinal fault that marks the front of the Fila Costena may be an example of such a fault. Wood from a raised wavecut platform along this thrust front was radiocarbon dated at 5540 yrs. A balanced cross section of the Fila Costena indicates a detachment at a depth of ~ 2 km near the contact between upper slope sediments of the Terraba basin and the underlying basement of the margin wedge. This cross section also requires a >10 km of shortening accomplished by underthrusting of the outer fore arc. Crustal thickening by this mechanism could explain the dichotomy between uplift of the mountainous Fila Costena and Talamanca Ranges and subsidence of the slope apron offshore. Superimposed on this regional uplift of the Costa Rican coast is a pattern of faster uplift within fault-bounded blocks that lie inboard of incoming seamount chains. Offshore of Nicoya, the subducting plate displays two parallel ridges: a ridge coincident with the trace of the Coc-Naz- East Pacific Rise junction and a ridge defined by the Fisher Seamount chain. Inboard of both these bathymetric features there are raised wavecut benches and headlands that expose Tertiary upper slope sediments. Radiocarbon dates for these platforms indicate maximum uplift rates of ~ 6 mm yr-1 with slower uplift rates between these regions. The largest scar in the Costa Rican forearc is a trough oriented parallel to the Car-Coc relative plate motion vector that extends from the trench to near the coastline. Inboard of this scar is the Herradura block, a block that has experienceed more uplift than adjacent regions. A wavecut platform near the faulted margin of the Herradura block yields radiocarbon dates of 1010-1650 yrs and uplift rates of ~2.5 mm yr-1. The Osa Peninsula inboard of the Cocos Ridge records some of the fastest uplift rates measured in the Costa Rican fore arc based on marine sediments deposited around the margins of this peninsula and radiocarbon (AMS)-dated as 27000 to 49000 yrs. The most striking aspect of uplift patterns is that the local areas of fastest uplift in the forearc lie inboard of the areas with the most scarring and erosion in the margin wedge offshore. This pattern of uplift requires either underplating of seamounts beneath the inner forearc or enhanced shortening and crustal thickening inboard of subducting seamounts.

Physical properties of fore-arc basalt and boninite in Izu-Bonin-Mariana forearc recovered by IODP Expedition 352

NASA Astrophysics Data System (ADS)

Honda, M.; Michibayashi, K.; Almeev, R. R.; Christeson, G. L.; Sakuyama, T.; Yamamoto, Y.; Watanabe, T.

2016-12-01

The Izu-Bonin-Mariana (IBM) arc is a typical intraoceanic arc system and is the type locality for subduction initiation. IODP-IBM project is aimed to understand subduction initiation, arc evolution, and continental crust formation. Expedition 352 is one of the IBM projects and that has drilled four sites at the IBM fore-arc. Expedition 352 has successfully recovered fore-arc basalts and boninites related to seafloor spreading during the subduction initiation as well as the earliest arc development. The fore-arc basalts were recovered from two sites (U1440 and U1441) at the deeper trench slope to the east, whereas the boninites were recovered from two sites (U1439 and U1442) at the shallower slope to the west. In this study, we studied textures and physical properties of both the fore-arc basalt and the boninite samples recovered by IODP Expedition 352. The fore-arc basalt samples showed aphyric texture, whereas the boninites showed hyaloclastic, aphyric and porphyritic textures. For the physical properties, we measured density, porosity, P-wave velocity and anisotropy of magnetic susceptibility. P-wave velocities were measured under ordinary and confining pressure. As a result, the densities are in a range between 2 g/cm3 and 3 g/cm3. The porosities are in a range between 5 % and 40 %. The P-wave velocities are in a wide range from 3 km/s to 5.5 km/s and have a positive correlation to the densities. The magnetic susceptibilities showed bimodal distributions so that the physical properties were classified into two groups: a high magnetic susceptibility group (>5×10-3) and a low magnetic susceptibility group (<5×10-3). The high magnetic susceptibility group is almost identical with the fore-arc basalt and boninite samples with the higher correlation trend between the P-wave velocities and the densities, whereas the low magnetic susceptibility group is only the boninite samples with the lower correlation trend between the P-wave velocities and the densities. It suggests that the densities could be related to the occurrence of magnetite in the samples, since the magnetic susceptibilities were remarkably correlated with the relationships between P-wave velocities and densities. In addition, these trends have also been found in the physical properties measured on board during Expedition 351.

Post-Earthquake Multibeam Bathymetry and Backscatter Survey of 6400 sq. km. of the Accretionary Complex / Forearc in the Area of the Main 12 Sept. 07 Earthquake Rupture Zone

NASA Astrophysics Data System (ADS)

Orange, D. L.; Teas, P. A.; Decker, J.; Baillie, P.; Djajadihardja, Y. S.; Danque, H.; Digby, A.; Rathore, S.; Patton, J.

2007-12-01

When the 12 September M8.4 Southern Sumatra Earthquake hit, TGS-Nopec was carrying out a multibeam survey in the Sunda Straits, between Java and Sumatra. Working in collaboration with UTIG, OSU, BGR, and BPPT, we designed a 48 hour target-of-opportunity survey in the forearc region of the earthquake in an area where two trench perpendicular multibeam and seismic lines had previously been acquired by BGR. The objectives of the survey were to fill in an area of previously unsurveyed seafloor, and to acquire a data set for before and after comparison with the BGR data. Approx. 1100 line km of multibeam data were acquired between 17 and 20 September on a series of trench-perpendicular lines spaced 8km apart (weather limitations constrained the line orientation). Steep slopes and high backscatter seafloor result in some areas of data dropout. Using a fixed swath width and equi-distant beam spacing, bathymetric grids have been created at a range of scales that provide detailed imagery of the seafloor. The toe of slope is at ~6000m, with several normal faults cutting the seafloor on the incoming plate. The toe region of the accretionary complex shows individual folds 10-40km long, with both seaward and landward vergence. Fold wavelength is ~4km, with fold axes showing a trend slightly oblique to structures higher up on the accretionary complex. The folds in the toe region are cut by ENE trending high angle faults. 20km landward of the toe, in water depths of 5000-3000m, there is a 10km wide region of complex geomorphology and steeper slopes (locally 20 degrees and higher) showing a more degraded character with numerous slump headscarps and linear canyons 5-10km long. Although the slope is dissected by numerous slumps we observe no evidence for recent slope failure in the adjacent forearc basins. We interpret this region to be the seafloor projection of a significant thrust ramp in the accretionary complex. Landward of this area we identify 2 continuous ridges over 80km long, but that in detail show an irregular seafloor morphology. At 2500m water depth, 65km from the toe of slope, a significant geomorphic break with 10-20 degree slopes extends the length of the survey area, with water depths shoaling to 800m. We interpret this to be the surface projection of an out-of-sequence thrust. Although we identify some large debris blocks (>1km in length) in the adjacent forearc basin, the blocks appear rounded, with no obvious source or associated smaller scale debris that would suggest relatively recent emplacement. We find no clear evidence for any large recent slope failures associated with the M8.4 Earthquake or its aftershocks.

Coalbed methane, Cook Inlet, south-central Alaska: A potential giant gas resource

USGS Publications Warehouse

Montgomery, S.L.; Barker, C.E.

2003-01-01

Cook Inlet Basin of south-central Alaska is a forearc basin containing voluminous Tertiary coal deposits with sufficient methane content to suggest a major coalbed gas resource. Coals ranging in thickness from 2 to 50 ft (0.6 to 15 m) and in gas content from 50 to 250 scf/ton (1.6 to 7.8 cm2/g) occur in Miocene-Oligocene fluvial deposits of the Kenai Group. These coals have been identified as the probable source of more than 8 tcf gas that has been produced from conventional sandstone reservoirs in the basin. Cook Inlet coals can be divided into two main groups: (1) those of bituminous rank in the Tyonek Formation that contain mainly thermogenic methane and are confined to the northeastern part of the basin (Matanuska Valley) and to deep levels elsewhere; and (2) subbituminous coals at shallow depths (<5000 ft [1524 m]) in the Tyonek and overlying Beluga formations, which contain mainly biogenic methane and cover most of the central and southern basin. Based on core and corrected cuttings-desorption analyses, gas contents average 230 scf/ton (7.2 cm2/g) for bituminous coals and 80 scf/ton (2.5 cm2/g) for subbituminous coals. Isotherms constructed for samples of both coal ranks suggest that bituminous coals are saturated with respect to methane, whereas subbituminous coals at shallow depths along the eroded west-central basin margin are locally unsaturated. A preliminary estimate of 140 tcf gas in place is derived for the basin.

Is the Central America forearc sliver part of the North America plate?

NASA Astrophysics Data System (ADS)

Guzman-Speziale, M.

2012-04-01

The Central America Forearc sliver is located between the Central America volcanic arc and the Middle America trench. Several authors have suggested that the forearc is being displaced to the northwest with respect to the Caribbean plate; they point to right-lateral, normal-faulting earthquakes along the Central America volcanic arc as prime evidence of this displacement. Apparently, the forearc continues to the northwest into southeastern Mexico, although this portion of the forearc is not being displaced. I present evidence that suggests that the forearc indeed continues into southeastern Mexico and that it belongs to the North America plate. Physiographically, there is a continuity of the forearc into the Coastal plains of southeastern (Chiapas) Mexico, across the Motagua and Polochic faults. Offshore, cross-sections of the Middle America trench are similar along the mexican (Chiapas) segment, and the Central American segment. Furthermore, at the northwestern end of the coastal plain there are no compressive structures, which suggests that the coastal plain is not being displaced to the northwest. As a matter of fact, fault-plane solutions for shallow earthquakes show extension rather than compression. Shallow, interplate earthquakes along the trench show similar parameters along both segments. P-axes and earthquake slip vectors have consistent azimuths, which relate better with Cocos-North America convergence than with Cocos-Caribbean. Azimuth of T-axes for normal-faulting earthquakes also agree well with Cocos-North America convergence. Similarity in several parameters is thus found across both segments, the Chiapas coastal plain and the Central America forearc sliver proper. This suggests that both segments are continuous and probably one and the same, and belonging to the North America plate. Perhaps more properly, the forearc sliver extends into southeastern Mexico and is part of the zone of deformation associated to the Cocos-North America-Caribbean plates triple junction. Right-lateral, strike-slip faulting along the volcanic arc, and GPS results for the forearc sliver indicate that the the forearc sliver is moving with respect to the Caribbean plate. In the model presented here, I propose that it is the Chortis block (the northwestern corner of the Caribbean plate) is the one moving with respect to the forearc. In fact, I have presented evidence elsewhere attesting to this.

The western transverse ranges microplate as a native terrane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, M.D.; Reed, W.E.

1994-04-01

Palocurrent measurements from the entire Cretaceous section of the western Transverse Ranges microplate (WTRM) yield a northerly flow direction. Point count data indicate a mixed provenance for both conglomerates and associated sandstones. The dominant provenance was mixed magmatic arc/recycled orogen and disected/transitional arc terranes. Petrographic, quantitative SEM and microprobe analysis also indicate the presence of diagnostic Franciscan mineralogy in these sediments, including glaucophane, riebeckite, lawsonite, and serpentine, suggesting derivation from a subduction complex. Olistoclasts of chert, jadeitic graywacke, serpentine and blueschist are found intermixed within the arc-derived sediments. Olistoclasts range in size from sub-millimeter to centimeter scale and olistoliths rangemore » up to 150 m. Well preserved internal bedding in some of the olistoliths suggest emplacement by landsliding indicating very short transport distance. This Franciscan material represents the oldest melange-derived material reported from this part of California and documents uplift and erosion of the subduction complex earlier than previously suggested. These data are consistent with deposition in a Cretaceous fore-arc basin located west or south of the San Diego area. The allochthonous WTRM of southern California can be reconstructed to an originally north-south oriented fore-arc basin. After deposition of the Sespe Formation (22 Ma [+-]) the microplate was slivered by strike-slip faults and rotated clockwise approximately 90[degrees], after which, the block again accreted against the continental margin. Our reconstruction suggest that depositional and structural trends for Eocene and Cretaceous sediments is likely to be different from that in the Miocene Monterey pay zones in the Santa Barbara channel region. If our reconstruction is correct, exploration strategy for Eocene and Cretaceous petroleum in the southern California Bight should take this tectonic model into account.« less

The Boring Volcanic Field of the Portland-Vancouver area, Oregon and Washington: tectonically anomalous forearc volcanism in an urban setting

USGS Publications Warehouse

Evarts, Russell C.; Conrey, Richard M.; Fleck, Robert J.; Hagstrum, Jonathan T.; O'Connor, Jim; Dorsey, Rebecca; Madin, Ian P.

2009-01-01

More than 80 small volcanoes are scattered throughout the Portland-Vancouver metropolitan area of northwestern Oregon and southwestern Washington. These volcanoes constitute the Boring Volcanic Field, which is centered in the Neogene Portland Basin and merges to the east with coeval volcanic centers of the High Cascade volcanic arc. Although the character of volcanic activity is typical of many monogenetic volcanic fields, its tectonic setting is not, being located in the forearc of the Cascadia subduction system well trenchward of the volcanic-arc axis. The history and petrology of this anomalous volcanic field have been elucidated by a comprehensive program of geologic mapping, geochemistry, 40Ar/39Ar geochronology, and paleomag-netic studies. Volcanism began at 2.6 Ma with eruption of low-K tholeiite and related lavas in the southern part of the Portland Basin. At 1.6 Ma, following a hiatus of ~0.8 m.y., similar lavas erupted a few kilometers to the north, after which volcanism became widely dispersed, compositionally variable, and more or less continuous, with an average recurrence interval of 15,000 yr. The youngest centers, 50–130 ka, are found in the northern part of the field. Boring centers are generally monogenetic and mafic but a few larger edifices, ranging from basalt to low-SiO2 andesite, were also constructed. Low-K to high-K calc-alkaline compositions similar to those of the nearby volcanic arc dominate the field, but many centers erupted magmas that exhibit little influence of fluids derived from the subducting slab. The timing and compositional characteristics of Boring volcanism suggest a genetic relationship with late Neogene intra-arc rifting.

A Triassic to Cretaceous Sundaland-Pacific subduction margin in West Sarawak, Borneo

NASA Astrophysics Data System (ADS)

Breitfeld, H. Tim; Hall, Robert; Galin, Thomson; Forster, Margaret A.; BouDagher-Fadel, Marcelle K.

2017-01-01

Metamorphic rocks in West Sarawak are poorly exposed and studied. They were previously assumed to be pre-Carboniferous basement but had never been dated. New 40Ar/39Ar ages from white mica in quartz-mica schists reveal metamorphism between c. 216 to 220 Ma. The metamorphic rocks are associated with Triassic acid and basic igneous rocks, which indicate widespread magmatism. New U-Pb dating of zircons from the Jagoi Granodiorite indicates Triassic magmatism at c. 208 Ma and c. 240 Ma. U-Pb dating of zircons from volcaniclastic sediments of the Sadong and Kuching Formations confirms contemporaneous volcanism. The magmatic activity is interpreted to represent a Triassic subduction margin in westernmost West Sarawak with sediments deposited in a forearc basin derived from the magmatic arc at the Sundaland-Pacific margin. West Sarawak and NW Kalimantan are underlain by continental crust that was already part of Sundaland or accreted to Sundaland in the Triassic. One metabasite sample, also previously assumed to be pre-Carboniferous basement, yielded Early Cretaceous 40Ar/39Ar ages. They are interpreted to indicate resumption of subduction which led to deposition of volcaniclastic sediments and widespread magmatism. U-Pb ages from detrital zircons in the Cretaceous Pedawan Formation are similar to those from the Schwaner granites of NW Kalimantan, and the Pedawan Formation is interpreted as part of a Cretaceous forearc basin containing material eroded from a magmatic arc that extended from Vietnam to west Borneo. The youngest U-Pb ages from zircons in a tuff layer from the uppermost part of the Pedawan Formation indicate that volcanic activity continued until c. 86 to 88 Ma when subduction terminated.

IODP Expedition 337: Deep Coalbed Biosphere off Shimokita - Microbial processes and hydrocarbon system associated with deeply buried coalbed in the ocean

NASA Astrophysics Data System (ADS)

Inagaki, Fumio; Hinrichs, Kai-Uwe; Kubo, Yusuke; IODP Expedition 337 Scientists

2016-06-01

The Integrated Ocean Drilling Program (IODP) Expedition 337 was the first expedition dedicated to subseafloor microbiology that used riser-drilling technology with the drilling vessel Chikyu. The drilling Site C0020 is located in a forearc basin formed by the subduction of the Pacific Plate off the Shimokita Peninsula, Japan, at a water depth of 1180 m. Primary scientific objectives during Expedition 337 were to study the relationship between the deep microbial biosphere and a series of ˜ 2 km deep subseafloor coalbeds and to explore the limits of life in the deepest horizons ever probed by scientific ocean drilling. To address these scientific objectives, we penetrated a 2.466 km deep sedimentary sequence with a series of lignite layers buried around 2 km below the seafloor. The cored sediments, as well as cuttings and logging data, showed a record of dynamically changing depositional environments in the former forearc basin off the Shimokita Peninsula during the late Oligocene and Miocene, ranging from warm-temperate coastal backswamps to a cool water continental shelf. The occurrence of small microbial populations and their methanogenic activity were confirmed down to the bottom of the hole by microbiological and biogeochemical analyses. The factors controlling the size and viability of ultra-deep microbial communities in those warm sedimentary habitats could be the increase in demand of energy and water expended on the enzymatic repair of biomolecules as a function of the burial depth. Expedition 337 provided a test ground for the use of riser-drilling technology to address geobiological and biogeochemical objectives and was therefore a crucial step toward the next phase of deep scientific ocean drilling.

Possible control of subduction zone slow-earthquake periodicity by silica enrichment.

PubMed

Audet, Pascal; Bürgmann, Roland

2014-06-19

Seismic and geodetic observations in subduction zone forearcs indicate that slow earthquakes, including episodic tremor and slip, recur at intervals of less than six months to more than two years. In Cascadia, slow slip is segmented along strike and tremor data show a gradation from large, infrequent slip episodes to small, frequent slip events with increasing depth of the plate interface. Observations and models of slow slip and tremor require the presence of near-lithostatic pore-fluid pressures in slow-earthquake source regions; however, direct evidence of factors controlling the variability in recurrence times is elusive. Here we compile seismic data from subduction zone forearcs exhibiting recurring slow earthquakes and show that the average ratio of compressional (P)-wave velocity to shear (S)-wave velocity (vP/vS) of the overlying forearc crust ranges between 1.6 and 2.0 and is linearly related to the average recurrence time of slow earthquakes. In northern Cascadia, forearc vP/vS values decrease with increasing depth of the plate interface and with decreasing tremor-episode recurrence intervals. Low vP/vS values require a large addition of quartz in a mostly mafic forearc environment. We propose that silica enrichment varying from 5 per cent to 15 per cent by volume from slab-derived fluids and upward mineralization in quartz veins can explain the range of observed vP/vS values as well as the downdip decrease in vP/vS. The solubility of silica depends on temperature, and deposition prevails near the base of the forearc crust. We further propose that the strong temperature dependence of healing and permeability reduction in silica-rich fault gouge via dissolution-precipitation creep can explain the reduction in tremor recurrence time with progressive silica enrichment. Lower gouge permeability at higher temperatures leads to faster fluid overpressure development and low effective fault-normal stress, and therefore shorter recurrence times. Our results also agree with numerical models of slip stabilization under fault zone dilatancy strengthening caused by decreasing fluid pressure as pore space increases. This implies that temperature-dependent silica deposition, permeability reduction and fluid overpressure development control dilatancy and slow-earthquake behaviour.

Mid-to-Lower-level Plutonic Rocks From Crust of the Southern Mariana Forearc: Implications for Growth of Continental Crust

NASA Astrophysics Data System (ADS)

Fryer, P.; Reagan, M.

2006-12-01

Tonalitic plutonic rocks dredged from the southern Mariana forearc are similar in terms of major element composition to tonalitic plutonic rocks of the Tanzawa Mountains on the Izu Peninsula of Japan. The tonalites of the Tanzawa Mountains have been interpreted to represent mid-lower crustal plutonic rocks that make up the 6.0 to 6.3 km/s layer identified in seismic velocity profiles of the Izu arc at 32°N. The tonalities of the southern Mariana forearc may be analogous to the Tanzawa tonalities in terms of lithology and presumably seismic velocities, but have distinctive trace element and isotopic compositions. The exposure of these rocks on the southern Mariana forearc in a location where it is narrower by up to 80 km than elsewhere along its strike indicates a truncation of the arc lithosphere by tectonic erosion in the southern Mariana forearc. If tectonic processes in the forearc have exposed silicic plutonic rock of the arc lithosphere within 150 km of the volcanic front, then the structure of the Mariana arc and forearc is likely similar to that of the Izu arc, where seismic velocity structure suggests 25% of the arc/forearc lithosphere is comprised of a mid-crustal level tonalitic plutonic complex. The trace element and Sr isotopic compositions of the tonalities dredged from the Mariana forearc links them to a suprasubduction-zone environment. The Pb isotopic compositions, however, are consistent with crystallization ages that may be as old as Cretaceous. The compositions of these tonalites differ markedly from those of silicic volcanic rocks that have erupted throughout the history of the IBM arc and suggest that they represent a minor component of the arc. Nevertheless, the presence of Cretaceous tonalites in the Mariana forearc suggests that a portion of its crust may predate subduction initiation. The presence of silicic mid-to-lower crustal level plutonics beneath the Mariana arc as well as Eocene rhyolites on Saipan indicate that average major element composition of the arc crust may be comparable with average continental crust. This is consistent with estimates of the average composition of the Izu arc crust from seismic velocity studies and petrologic studies of exposures of the Izu arc crust in southern Japan's Izu peninsula. These data imply that the island arc that developed along the entire margin of the Philippine Sea plate may have had a generally similar structure and composition. Most components of the IBM arc crust, however, have relatively flat rare-earth patterns and low rare-earth concentrations compared with average continental crust. The averaged composition of the IBM crust, as a whole, differs markedly from that suggested by studies of the velocity structure of the central Aleutian arc. If the continental crust was generated in oceanic island arc settings throughout the history of the Earth, then its sources were significantly more enriched in LREE than the sources for the Cenozoic IBM arcs.

Characterisation of along- and across-strike variation of accretionary prism structure and insights into earthquake segmentation, Central Sumatran Forearc

NASA Astrophysics Data System (ADS)

Cook, B.; Henstock, T.; McNeill, L. C.; Geersen, J.; Bull, J. M.

2013-12-01

The Central Sumatran Forearc exhibits along and across strike variations in morphology and deformation style; variations occur over distances of 10's to 100's of kilometres and are related to the varying oceanic basement topography and sediment input. We present a detailed interpretation of multi-channel seismic reflection (MCS) data offshore Central Sumatra to better characterise morphologic and structural variations; provide insight into fault development; relate structures to the varying input parameters; and identify any links to seismicity. The data were collected using a 5420 cu. in. gun array and recorded with a 192-channel, 2.4 km long streamer. Data coverage extends across strike from the deformation front to the outer forearc high with a few lines extending into the forearc basin; and along strike from 1.5οS to 3oN. In the southern part of our study area, from 1.5oS to 0.5oN, oceanic basement highs outcrop at the seafloor along the outer-arc high and the sediment section thickness varies from approximately 1.2 to 3.2 km at the trench. The accretionary prism is comprised of seaward-, landward- and mixed-vergence faults which apparently sole into the top of oceanic basement. Landward-vergent faults are concentrated at the deformation front near the subducting Wharton Fossil Ridge and seem to be associated with a relatively strong downgoing plate reflection. The larger accretionary prism structure is dominated by two relatively continuous, major fault-controlled structures that divide the prism into three strike-parallel belts. From 0.5oN to 2oN, the sediment section is approximately 2.3-4.3 km thick and we do not observe oceanic basement outcrops at the seafloor. Landward-vergent faults are less common and where present they are subordinate to relatively high-offset seaward-vergent faults at the deformation front. The larger prism structure has a convex profile which results from displacement on several major faults. North of 2oN, the sediment section at the trench is >4.5 km thick and a high-amplitude, negative polarity reflector is observed approximately 500 m above the oceanic basement. Landward-vergent faults are commonly observed at the deformation front. The larger accretionary prism structure transitions to the steep frontal prism and wide plateau geometry observed off Northern Sumatra. In the southern part of our study area, short wavelength variations in structure and plate boundary reflectivity, and the Batu Islands earthquake segment boundary are coincident with the subducting Wharton Fossil Ridge. Longer-wavelength changes in the overall prism structure observed across our study area are likely related to regional changes in sediment properties and thickness and may be linked to differing rupture characteristics.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bird, P.R.; Johns, C.C.; Clark-Lowes, D.D.

Western Turkey consists of a number of tectonic terranes joined together by a network of suture zones. The terranes originated as microcontinental plates that rifted away from the continental margins forming the northern and southern boundaries of the Tethyan sea. These micro-continents were united by a series of collisions beginning in the Late Triassic and ending in the Miocene, with the final closure of the Tethyan sea. The sedimentary cover of the microcontinents consists of Paleozoic and Mesozoic passive margin and rift basin sequences containing numerous potential source and reservoir intervals. Most of these sequences show affinities with Gondwanaland, withmore » the notable exception of the Istanbul nappe, which is strongly Laurasian in character. Forearc basin sequences were also deposited on the margins of the microcontinents during early Tertiary plate convergence. Ensuing continental collisions resulted in compressional deformation of sedimentary cover sequences. The intensity of deformation ranged from basin inversion producing numerous potential hydrocarbon traps, to large-scale overthrusting. Following continental suturing, continued compression in eastern Turkey has been accommodated since the Miocene by westward escape of continental lithosphere between the North and South Anatolian transform faults. Neotectonic pull-apart basins formed in response to these movements, accumulating large thicknesses of Miocene-Pliocene carbonates and clastic sediments. Potential reservoirs in the Neotectonic basins may be sourced either in situ or from underlying Paleozoic and Mesozoic source rocks that remain within the hydrocarbon generating window today.« less

Crustal architecture of the cascadia forearc.

PubMed

Trehu, A M; Asudeh, I; Brocher, T M; Luetgert, J H; Mooney, W D; Nabelek, J L; Nakamura, Y

1994-10-14

Seismic profiling data indicate that the thickness of an accreted oceanic terrane of Paleocene and early Eocene age, which forms the basement of much of the forearc beneath western Oregon and Washington, varies by approximately a factor of 4 along the strike of the Cascadia subduction zone. Beneath the Oregon Coast Range, the accreted terrane is 25 to 35 kilometers thick, whereas offshore Vancouver Island it is about 6 kilometers thick. These variations are correlated with variations in arc magmatism, forearc seismicity, and long-term forearc deformation. It is suggested that the strength of the forearc crust increases as the thickness of the accreted terrane increases and that the geometry of the seaward edge of this terrane influences deformation within the subduction complex and controls the amount of sediment that is deeply subducted.

Neogene evolution of the North New Guinea basin, Papua New Guinea: New constraints from seismic and subsidence analysis and implications for hydrocarbon exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cullen, A.B.; Pigott, J.D.

1990-06-01

The present-day North New Guinea basin is a Plio-Pleistocene successor basin that formed subsequent to accretion of the Finisterre volcanic arc to the Australian Plate. The Ramu, Sepik, and Piore infrabasins formed in a forearc setting relative to the continental Maramuni magmatic arc. The evolution of these infrabasins was strongly influenced by accretion of the composite Torricelli-Prince Alexander terrane to the Australian Plate. Regional reflection seismic data and tectonic subsidence-subsidence rate calculations for seven wells drilled in the North New Guinea basin reveal a complex history. The timing and magnitude of subsidence and changes in subsidence rates differ between eachmore » of the Miocene infrabasins. A diachronous middle to late Miocene unconformity generally truncates infrabasin sequences. The Nopan No. 1 in the Sepik basin, however, has a complete middle Miocene to Pleistocene sedimentary record. This well records late Miocene negative subsidence rates documenting that the Nopan anticline grew as erosion occurred elsewhere in the region. This circumstance suggests that the major, sequence-bounding unconformity results from regional uplift and deformation, rather than changes in global sea level. The Plio-Pleistocene evolution of the North New Guinea basin has two profound implications regarding hydrocarbon exploration. First, the late Pliocene structural inversion of parts of the basin hinders stratigraphic and facies correlation inferred from the present setting. The recognition of basin inversion is particularly important in the Piore basin for predicting the distribution of potential reservoir facies in the Miocene carbonates. Second, the subsidence data suggest that although potential source rocks may be thermally within the oil window, these rocks may not have had sufficient time to mature owing to their recent burial.« less

Initial magmatism and evolution of the Izu-Bonin-Mariana Arc

NASA Astrophysics Data System (ADS)

Arculus, R. J.

2016-12-01

Expedition 351 of the IODP targeted site U1438 in the Amami Sankaku Basin, northwestern Philippine Sea , 70 km west of the northern Kyushu-Palau Ridge (KPR). The latter formed a chain of stratovolcanoes of the Izu-Bonin-Mariana (IBM) arc, and a remnant arc following migration of the volcanic front eastwards during Shikoku backarc basin formation in the Miocene. Unravelling causes of subduction initiation drove the primary aims of the Expedition involving recovery of igneous basement below the KPR, and a history of the magmatic evolution of the KPR preserved in a clastic record. All these aims were achieved, but with some surprises. Out of 1600m drilled in 4700m water depth, 150m of igneous oceanic crust comprising low-K, tholeiitic basalt lava flows were recovered at U1438. The lavas are variably glassy to microphyric, Cr-spinel-olivine-plagioclase-clinopyroxene-bearing, have high V/Ti, very low absolute rare earth element abundances and low La/Yb, and radiogenic Hf at a given 143/144Nd compared to basalts of mid-ocean ridges. The basement is geochemically and petrologically similar to so-called "forearc basalts" recovered trenchward of the active IBM volcanic front, and of similar or older age (≥52Ma). Highly melt-depleted mantle source(s) were involved and high-temperature, low-pressure dehydration of the subducting Pacific Plate. Compositions of glass (formerly melt) inclusions in clinopyroxene-bearing clasts and sandstones in sediments overlying the basement show a change from medium-Fe (aka "calcalkaline") to low-Fe (tholeiitic) magmas during the Eocene-Oligocene evolution of the KPR. Widespread magmatism along- and across-strike of the nascent IBM system coupled with geologic constraints from the western Philippine Sea, indicate subduction initiation at the IBM arc likely propagated adjacent to Mesozoic-aged arcs/basins to the west of the KPR, following plate reorganization subsequent to the demise of the Izanagi-Pacific Ridge along eastern Asia at 60Ma. Neither the spontaneous nor induced models of subduction initiation adequately capture the inception of the IBM arc. Geographic modifiers of basalt types such as "forearc" are overly restrictive and potentially misleading.

Barbados: Architecture and implications for accretion

NASA Astrophysics Data System (ADS)

Speed, R. C.; Larue, D. K.

1982-05-01

The island of Barbados exposes the crestal zone of the remarkably broad accretionary prism of the Lesser Antilles foreacrc. The architecture of Barbados is three-tiered: an upper arched cap of Pleistocene reefs that record rapid and differential uplift of the island, an intermediate zone of nappes of mainly abyssal or deep bathyal pelagic rocks, and a basal complex whose lithotypes extend to substantial depth and may be representative of the bulk of the western or inner accretionary prism. The exposed basal complex consists of generally steeply dipping ENE to NE-striking fault-bounded packets which contain rocks of one of three lithic suites: terrigenous (quartzose turbidite and mudstone), debris flow, and hemipelagic (chiefly radiolarite). Present but imcomplete rock dating indicates that the terrigenous and hemipelagic suites and the pelagic rocks of the intermediate zone are age overlapping in Early and Middle Eocene time. Deformation within packets of the basal complex is systematic, pre- or synfault, and indicative of shortening that is generally normal to packet boundaries. A unit of terrigenous materials that probably underwent local resedimentation in the Miocene is recognized in wells, but its relationship to exposed rocks is uncertain. The packet-bounding faults of the basal complex are interpreted to have been primary accretionary surfaces which may have been reactivated by later intraprism movements. Exposed sedimentary rocks of Barbados can be successfully assigned to contemporaneous depositional sites associated with an accretionary prism: terrigenous beds to a trench wedge that was connected to South American sediment sources, debris flow to trench floor or slope basin accumulations of material derived from the lower slope, hemipelagic to Atlantic plain strata, and pelagic rocks of the intermediate zone to deep outer forearc basin sites. The decollement at the base of the intermediate zone is probably due to uplift and arcward motion of the crestal zone of the accretionary prism with respect to the forearc basin during progressive prism growth. Principal uplift of the prism seems to have started, apparently abruptly, in the Miocene. Quaternary uplift of Barbados may be due partly to local diapirism. Paleogene subduction that created the arcward region of the prism probably occurred in a differently configured zone from the present one.

Characterizing the Inner Accretionary Prism of the Nankai Trough with 3D Seismic and Logging While Drilling at IODP Site C0002

NASA Astrophysics Data System (ADS)

Boston, B.; Moore, G. F.; Jurado, M. J.; Sone, H.; Tobin, H. J.; Saffer, D. M.; Hirose, T.; Toczko, S.; Maeda, L.

2014-12-01

The deeper, inner parts of active accretionary prisms have been poorly studied due the lack of drilling data, low seismic image quality and typically thick overlying sediments. Our project focuses on the interior of the Nankai Trough inner accretionary prism using deep scientific drilling and a 3D seismic cube. International Ocean Discovery Program (IODP) Expedition 348 extended the existing riser hole to more than 3000 meters below seafloor (mbsf) at Site C0002. Logging while drilling (LWD) data included gamma ray, resistivity, resistivity image, and sonic logs. LWD analysis of the lower section revealed on the borehole images intense deformation characterized by steep bedding, faults and fractures. Bedding plane orientations were measured throughout, with minor gaps at heavily deformed zones disrupting the quality of the resistivity images. Bedding trends are predominantly steeply dipping (60-90°) to the NW. Interpretation of fractures and faults in the image log revealed the existence of different sets of fractures and faults and variable fracture density, remarkably high at fault zones. Gamma ray, resistivity and sonic logs indicated generally homogenous lithology interpretation along this section, consistent with the "silty-claystone" predominant lithologies described on cutting samples. Drops in sonic velocity were observed at the fault zones defined on borehole images. Seismic reflection interpretation of the deep faults in the inner prism is exceedingly difficult due to a strong seafloor multiple, high-angle bedding dips, and low frequency of the data. Structural reconstructions were employed to test whether folding of seismic horizons in the overlying forearc basin could be from an interpreted paleothrust within the inner prism. We used a trishear-based restoration to estimate fault slip on folded horizons landward of C0002. We estimate ~500 m of slip from a steeply dipping deep thrust within the last ~0.9 Ma. Folding is not found in the Kumano sediments near C0002, where normal faults and tilting dominate the modern basin deformation. Both logging and seismic are consistent in characterizing a heavily deformed inner prism. Most of this deformation must have occurred during or before formation of the overlying modern Kumano forearc basin sediments.

Submarine mass wasting on the Ionian Calabrian margin

NASA Astrophysics Data System (ADS)

Ceramicola, S.; Forlin, E.; Coste, M.; Cova, A.; Praeg, D.; Fanucci, F.; Critelli, S.

2010-12-01

Mass wasting processes on continental margins have strong relevance both for geohazards of coastal areas and for the emplacement and monitoring of offshore infrastructures. The seabed dynamics of the Ionian Calabrian Margin (ICM) are currently being examined in the context of the project MAGIC (Marine Geohazard along the Italian Coasts). The objective of this project is the definition of elements that may constitute geological risk for coastal areas. The ICM is a tectonically-active margin, the structures of which reflect two main processes: frontal compression and fore-arc extension during the SE advance of the Calabrian accretionary prism since the late Miocene; and a rapid uplift (up to 1mm/yr) of onshore and shallow shelf areas since the mid-Pleistocene. These processes are reflected in different tectonic settings at seabed, which is characterized by a narrow continental shelf above a slope of irregular morphology in water depths of 150-2000 m. In the north, a broad slope is dominated by ridges and intervening basins that are the morphological expression of the southern Apennine fold-and-thrust belt; in the south, the continental slope descends steeply towards the deep-water Crotone and Spartivento fore-arc basins. The overall objective of this study is to map major features of mass wasting on the slopes of the ICM, investigate possible triggering mechanisms and consider the geohazards these features may represent for coastal areas. The study is based on an integrated analysis of multibeam morpho-bathymetric data and subbottom profiles, which together allow the recognition of four main types of mass wasting phenomena along the slopes of the ICM: 1) mass transport complexes (MTCs) within intra-slope basins - these are identified in the northern area, within the piggy-back basins: seabed imagery show the slopes of all the seabed ridges to be marked by headwall scarps recording widespread failure, while Chirp profiles show the adjacent basins to contain unstratified bodies indicative of debris flows buried beneath stratified sediments; multiple debris flows in several basins indicate one or more past episodes of failure that may be linked to activity on the faults bounding the structural highs. 2) slope slide scars - these are identified in two locations along the relatively steep southern Calabrian slope; the slide scars record several episodes of failure, linked to deposits within the deep-water basins that are yet to be identified. 3) possible gravity sliding - in one area of the southern Calabrian slope, elongate seabed features oriented subparallel to contours are observed, associated with diapiric structures that have been linked to Messinian salt observed on seismic profiles (Rossi & Sartori 1981); we suggest that the elongate seabed features may record a form of downslope sediment sliding above salt, resulting in features analogous to the cobblestone topography of the outer Calabrian Arc; 4) canyon headwalls - in the upper parts of all canyons, numerous headwall scarps are consistent with retrogressive activity of the canyons.

Structure and Evolution of the Forearc-Arc Crust Along the Tonga-Kermadec Subduction System from Integrated Geophysical Data

NASA Astrophysics Data System (ADS)

Funnell, M.; Peirce, C.; Robinson, A. H.; Watts, A. B.; Grevemeyer, I.

2016-12-01

Variations in tectonic forces and inputs to subduction systems generate, alter, and deform overriding crustal material. Although these processes are recorded in the crustal structure of volcanic arcs and their backarcs, the continuous nature of plate convergence superimposes subsequent episodes of crustal evolution on older features. Seismic imaging at modern subduction zones enhances our understanding of forearc development and variations in present-day deformation caused by inherited structures. In 2011 a set of multichannel and wide-angle seismic profiles imaged the forearc-arc crust and upper mantle structure along the 2700 km-long NNE-SSW trending Tonga-Kermadec subduction zone. The Tonga forearc region exhibits an 100 km-wide, 2 km high bathymetric elevation, with a 3 km-thick upper and mid-crust (Vp <6 km s-1), and a lower-crustal ridge 30 km wide comprising velocities up to 7.4 km s-1 that characterize an extinct Eocene ( 50 Ma) arc. By contrast, the active arc is <10 km wide and exhibits lower-crustal velocities below 7.0 km s-1, most likely representing intermediate compositions. This structural change suggests significant evolution, alteration, and modification of the overriding crust since the onset of subduction at this margin. Gravity anomaly modelling suggests that the extinct arc within the Tonga forearc region comprises relatively dense mafic-ultrabasic material that extends south beneath the Kermadec forearc and terminates at 32°S. The apparent southern termination of the extinct arc coincides with the partitioning of morphological features at 32°S, including a 10-km westward-step of the active arc and a 1.5 km deeper backarc to the south. We propose that tectonic partitioning about the 32°S boundary is the result of variations in the inherited crustal structure, which is divided by the presence and absence, to the north and south respectively, of the extinct volcanic arc.

Detrital zircon geochronology support for Baja-BC hypothesis or Why zircons in the Nanaimo Basin, British Columbia are not from the Rocky Mountains.

NASA Astrophysics Data System (ADS)

Guest, B.; Matthews, W.; Hubbard, S. M.; Coutts, D. S.; Bain, H.

2016-12-01

The development of Cordilleran orogen of western North American is disputed despite a century of study. Paleomagnetic observations require large-scale dextral displacement of crustal fragments along the western margin of North America, from low latitudes to moderate latitudes during the Cretaceous-Paleogene. A lack of corroborating geological evidence for large-scale displacements has prevented the widespread integration of paleomagnetic data into contemporary tectonic models for the margin. Here we investigate the Cretaceous paleogeographic position of the Baja-BC block, a crustal fragment consisting of the Alexander and Wrangel terranes, using detrital zircons from the Nanaimo Basin of Vancouver Island, British Columbia. We compare 4310 detrital zircon U/Pb analyses from 16 samples to potential source areas in western North America to test hypothesized northern and southern paleogeographic positions. Our detrital zircon data suggest that sediment in the Nanaimo Basin derives from the Mojave-Sonoran Region of southwestern North America, supporting a southerly late Cretaceous paleogeographic position. We present a speculative Cretaceous to Paleogene paleogeographic reconstruction for the southwestern United States and northern Mexico that accommodates the presence, and northward transport, of the Baja-BC block. We propose that the Western Coast Mountains Batholith and the Nanaimo Basin represent the missing segment of the Mesozoic magmatic arc and associated forearc regions, between the Sierra Nevada and Peninsular Ranges Batholiths. This segment was translated northward following capture by the Kula plate. As such, we reconcile the paleomagnetic data for the Baja-BC block with the geology of the southwestern United States. Our model, albeit speculative, is compatible with the large-scale tectonic and magmatic processes that affected western North America in the Late Cretaceous and Paleogene.

Oligocene-Miocene burial and exhumation of the southernmost Gangdese mountains from sedimentary and thermochronological evidence

NASA Astrophysics Data System (ADS)

Ge, Yukui; Li, Yalin; Wang, Xiaonan; Qian, Xinyu; Zhang, Jiawei; Zhou, Aorigele; Liu-Zeng, Jing

2018-01-01

The Kailas conglomerates crop out ubiquitously along the southernmost boundary of the Gangdese batholith. They unconformably overlie the Gangdese batholith and are displaced by the Great Counter thrust (GCT) fault, forming a fault contact with the Xigaze forearc basin, the associated subduction complex and the Tethyan Himalayan sequence. These strata furnish a record of uplift and paleoenvironmental change in the Indus-Yarlung suture zone during the Oligocene-Miocene. Our new and previously published low-temperature thermochronometric data from the Gangdese batholith and the Kailas conglomerates indicate a period of rapid exhumation beginning approximately 17-15 Ma centered on the southern margin of the Gangdese batholith, whereas regional uplift commenced significantly earlier during the deposition of the Kailas conglomerates, based on the presence of an abrupt facies transition from deep-water lacustrine deposits to red alluvial fan or fluvial deposits. The period of rapid exhumation probably lagged behind the initiation of faster uplift, while the related changes in the depositional environment were most likely recorded immediately in the basin stratigraphy. Subsequently, the Kailas conglomerates were buried in association with the development of the north-directed Great Counter thrust, while rapid exhumation was facilitated by efficient incision by the paleo-Yarlung river at approximately 17-15 Ma.

Hf-Nd Isotopes in West Philippine Basin Basalts: Results from International Ocean Discovery Program (IODP) Site U1438 and Implications for the Early History of the Izu-Bonin-Mariana (IBM) Subduction System

NASA Astrophysics Data System (ADS)

Yogodzinski, G. M.; Hocking, B.; Bizimis, M.; Hickey-Vargas, R.; Ishizuka, O.; Bogus, K.; Arculus, R. J.

2015-12-01

Drilling at IODP Site U1438, located immediately west of Kyushu-Palau Ridge (KPR), the site of IBM subduction initiation, penetrated 1460 m of volcaniclastic sedimentary rock and 150 m of underlying basement. Biostratigraphic controls indicate a probable age for the oldest sedimentary rocks at around 55 Ma (51-64 Ma - Arculus et al., Nat Geosci in-press). This is close to the 48-52 Ma time period of IBM subduction initiation, based on studies in the forearc. There, the first products of volcanism are tholeiitic basalts termed FAB (forearc basalt), which are more depleted than average MORB and show subtle indicators of subduction geochemical enrichment (Reagan et al., 2010 - Geochem Geophy Geosy). Shipboard data indicate that Site U1438 basement basalts share many characteristics with FABs, including primitive major elements (high MgO/FeO*) and strongly depleted incompatible element patterns (Ti, Zr, Ti/V and Zr/Y below those of average MORB). Initial results thus indicate that FAB geochemistry may have been produced not only in the forearc, but also in backarc locations (west of the KPR) at the time of subduction initiation. Hf-Nd isotopes for Site 1438 basement basalts show a significant range of compositions from ɛNd of 7.0 to 9.5 and ɛHf of 14.5 to 19.8 (present-day values). The data define a well-correlated and steep array in Hf-Nd isotope space. Relatively radiogenic Hf compared to Nd indicates an Indian Ocean-type MORB source, but the dominant signature, with ɛHf >16.5, is more radiogenic than most Indian MORB. The pattern through time is from more-to-less radiogenic and more variable Hf-Nd isotopes within the basement section. This pattern culminates in basaltic andesite sills, which intrude the lower parts of the sedimentary section. The sills have the least radiogenic compositions measured so far (ɛNd ~6.6, ɛHf ~13.8), and are similar to those of boninites of the IBM forearc and modern IBM arc and reararc rocks. The pattern within the basement suggests modest enrichment of a depleted Indian MORB source over time.

Deep Seismic Imaging of the Hellenic Subduction Zone with New MCS Data of the SISMED Project

NASA Astrophysics Data System (ADS)

Becel, A.; Mireille, L.; Hussni, S.; Dessa, J. X.; Schenini, L.; Sachpazi, M.; Vitard, C.

2016-12-01

The southwestern segment of the Hellenic subduction zone has generated a M>8 tsunamigenic earthquake in the past (365 AD), the largest event ever reported in Europe, but fundamental questions remain about the deep geometry and characteristics of the interplate fault and connected splay faults in the overriding plate that might be rooted in the megathrust. In the Fall 2012, the ULYSSE seismic program acquired deep penetration multichannel seismic (MCS) and OBS refraction profiles across a 300-km-wide section of the forearc domain. MCS data were acquired with a 4.5 km-long streamer on board the R/V Le Pourquoi Pas? from the French IFREMER facilities. The two 240 km-long seismic reflection dip profiles reveal a large and rough topography of the top of the forearc crust in both the outer and inner domains, including a several km thick forearc basin. Despite the thick Messinian evaporites at shallow depths, the 11000 cu.in airgun source reveal several discontinuous arcward-dipping reflections at 15 km depth beneath the outer forearc domain that could be related to the top of the subducting oceanic crust. Unfortunately, the 4.5 km-long streamer is too short for improving their lateral continuity and getting more detailed constraints on their geometry. In the Fall 2015, we chartered the R/V Marcus Langseth equipped with unmatched seismic facilities in the European academic fleet by means of a strong mobilization of the French and American involved laboratories (Géoazur, LDEO, ISTEP, ENS-Paris, EOST, LDO, Pau Univ.) and their research agencies (CNRS, NSF, OCA, and UCA). During the SISMED survey (Seismic Imaging inveStigation in MEDiterranean Sea for deep seismogenic faults), we collected with the R/V Marcus Langseth a 210 km-long profile coincident with the eastern ULYSSE transect with the 8 km-long streamer and a 6600 cu.in tuned airgun array shot every 50 meters. The source and the streamer were towed at a depth of 12 m to maximize low frequencies and deep imaging. Here, we will present the preliminary results of the newly acquired high-quality, high-resolution and deep-penetration data and we will provide a comparison of the two datasets collected with different acquisition parameters.

Topography of the overriding plate during progressive subduction: A dynamic model to explain forearc subsidence

NASA Astrophysics Data System (ADS)

Chen, Z.; Schellart, W. P.; Duarte, J. C.; Strak, V.

2017-12-01

Topography that forms at the free top surface of the lithosphere contains important information about the dynamics of the tectonic plates and the sub-lithospheric mantle. Investigating topography around subduction zones can provide quantitative and conceptual insights into the interaction between the plates, the slabs, mantle flow, and the associated stresses. To achieve this, geodynamic modelling can be an effective tool. In this study, we used techniques of stereoscopic photogrammetry and Particle Image Velocimetry to monitor simultaneously the topography of the overriding plate and the velocity field of the subduction-induced mantle flow occurring in the mantle wedge. Model results show that the overriding plate topography is characterized by an area of forearc topographic subsidence, with a magnitude scaling to 1.44-3.97 km in nature, and a transient local topographic high located between the forearc depression and the trench. These topographic features rapidly develop during the slab sinking phase and gradually decrease during the slab rollback phase. We propose that these topographic transient features predominantly result from the variation of the vertical component of the trench suction along the subduction zone interface, which is minimum near the trench and maximum near the tip of the mantle wedge and is caused by the gradual slab steepening during the initial transient slab sinking phase. The downward mantle flow in the nose of the mantle wedge plays a minor role in the formation of the forearc subsidence. Our findings provide a new mechanism for the formation of forearc topographic subsidence, which has been commonly observed at natural subduction zones.

Deformation of Forearcs during Aseismic Ridge Subduction

NASA Astrophysics Data System (ADS)

Zeumann, S.; Hampel, A.

2014-12-01

Subduction of aseismic oceanic ridges causes considerable deformation of the forearc region. To identify the crucial parameters for forearc deformation we created 3D finite-element models representing both erosive and accretive forearcs as well as migrating and non-migrating ridges. As natural examples we choose the Cocos ridge subducting stationary beneath the erosive margin of Costa Rica and the Nazca and Gagua Ridges that migrate along the erosive Peruvian margin and the accretive accretive Ryukyu margin, respectively. A series of models show that the deformation of the forearc depends on the ridge shape (height, width), on the frictional coupling along the plate interface and the mechanical strength of the forearc. The forearc is uplifted and moved sideward during ridge subduction. Strain components show domains of both, shortening and extension. Along the ridge axis, extension occurs except at the ridge tip, where shortening prevails. The strain component normal to the ridge axis reveals extension at the ridge tip and contraction above the ridge flanks. Shortening and extension increase with increasing ridge height. Higher friction coefficients lead to less extension and more shortening. Accretive wedges show larger indentation at the model trench. For stationary ridges (Cocos Ridge) the deformation pattern of the forearc is symmetric with respect to the ridge axis whereas for migrating ridges (Nazca Ridge, Gagua Ridge) the oblique convergence direction leads to asymmetric deformation of the forearc. In case of ridge migration, uplift occurs at the leading flank of the ridge and subsidence at the trailing flank, in agreement with field observations and analogue models. For a model with a 200-km-wide and 1500-m-high ridge (i.e. similar to the dimensions of the Nazca Ridge), the modelled uplift rate at the southern ridge flank of the ridge is ~1 mm/a, which agrees well with uplift rates of ~0.7 mm/a derived from the elevation of marine terraces in southern Peru.

Seismic activity offshore Martinique and Dominica islands (Central Lesser Antilles subduction zone) from temporary onshore and offshore seismic networks

NASA Astrophysics Data System (ADS)

Ruiz, M.; Galve, A.; Monfret, T.; Sapin, M.; Charvis, P.; Laigle, M.; Evain, M.; Hirn, A.; Flueh, E.; Gallart, J.; Diaz, J.; Lebrun, J. F.

2013-09-01

This work focuses on the analysis of a unique set of seismological data recorded by two temporary networks of seismometers deployed onshore and offshore in the Central Lesser Antilles Island Arc from Martinique to Guadeloupe islands. During the whole recording period, extending from January to the end of August 2007, more than 1300 local seismic events were detected in this area. A subset of 769 earthquakes was located precisely by using HypoEllipse. We also computed focal mechanisms using P-wave polarities of the best azimuthally constrained earthquakes. We detected earthquakes beneath the Caribbean forearc and in the Atlantic oceanic plate as well. At depth seismicity delineates the Wadati-Benioff Zone down to 170 km depth. The main seismic activity is concentrated in the lower crust and in the mantle wedge, close to the island arc beneath an inner forearc domain in comparison to an outer forearc domain where little seismicity is observed. We propose that the difference of the seismicity beneath the inner and the outer forearc is related to a difference of crustal structure between the inner forearc interpreted as a dense, thick and rigid crustal block and the lighter and more flexible outer forearc. Seismicity is enhanced beneath the inner forearc because it likely increases the vertical stress applied to the subducting plate.

Carboniferous Proto-type Basin Evolution of Junggar Basin in Northwest China: Implications for the Growth Models of Central Asia Orogenic Belt

NASA Astrophysics Data System (ADS)

He, D.

2016-12-01

The Junggar Basin locates in the central part of Paleo-Asian Ocean tectonic domain, and records the dynamic processes of the Central Asian Orogenic Belt from subduction-accretion-collision to later intracontinental deformations. Carboniferous is the key period from subduction to closure in the tectonic evolution of Paleo-Asian Ocean. Based on the borehole, outcrop, seismic and gravity and magnetic anomaly data, the paper made analysis of the Carboniferous basin evolution.Geo-chronological results for the borehole volcanic rocks suggest that the Junggar Basin and adjacent area had five periods of volcanic activities, including two periods in the Early Carboniferous (359-347Ma 347-331Ma and 331-324Ma) and three periods in the Late Carboniferous (323-307Ma and 307-300Ma). Regional unconformities divided the Carboniferous into two tectono-stratigraphic sequences: Lower Carboniferous and Upper Carboniferous. The former is characterized by compressional structures and involves massive calc-alkaline basalts, andesites, dacites and rhyolites, whereas the later is mainly controlled by extensional faults and dominated by intermediate-mafic volcanic rocks, with bimodal volcanic rocks in parts. The paper determined four Carboniferous arc-basin belts in the Junggar Basin and adjacent area from north to south: the Saur-Fuhai-Dulate, Heshituoluogai-Wulungu-Yemaquan, Darbut-Luliang-Karamaili, and Zhongguai-Mosuowan-Baijiahai-Qitai, and identified multi-type basins, such as fore-arc basin, retro-arc basin, intra-arc rift basin, foreland basin and passive continental margin basin,etc.. The Carboniferous proto-type basin evolution of the Junggar Basin can be divided into three phases such as, the early to middle Early Carboniferous subduction-related compressional phase, the late Early Carboniferous to middle Late Carboniferous subduction-related extensional phase and the late Late Carboniferous intra-continental fault-sag phase. The study discloses that the Junggar Basin is likely underlain by juvenile continental crust rather than unified Precambrian basement, and also implies that the Junggar Basin and adjacent area, even the entire CAOB, were built by successively northward amalgamation of multiple linear arc-basin systems characterized by southward accretion.

Basement Basalts from IODP Site 1438, Amami-Sankaku Basin: Implications for Sources and Melting Processes during Subduction Initiation in the Izu-Bonin-Mariana System

NASA Astrophysics Data System (ADS)

McCarthy, A. J.; Hickey-Vargas, R.; Yogodzinski, G. M.; Ishizuka, O.; Hocking, B.; Bizimis, M.; Savov, I. P.; Kusano, Y.; Arculus, R. J.

2016-12-01

IODP Expedition 351 Site 1438 is located in the Amami-Sankaku basin, just west of the Kyushu-Palau Ridge (KPR), a remnant of the early Izu-Bonin-Mariana (IBM) volcanic arc. 150 meters of basement basalt were drilled beneath 1460 m of volcaniclastic sediments and sedimentary rock. The age range inferred for these basalts is 51-52 Ma, close to the 48-52 Ma age of basalts associated with subduction initiation in the IBM forearc (forearc basalts or FABs). Site 1438 basement basalts form several distinct subunits, all relatively mafic (MgO = 6-14 %; Mg# = 51-83). Non-fluid-mobile incompatible trace element patterns are profoundly depleted. Sm/Nd (0.34-0.43) and Lu/Hf (0.18-0.37) reach values higher than most normal MORBs while La/Yb (0.31-0.98) and Ti/V (15.8-27.0) are lower. These features are shared with basalts drilled just west of the KPR at ODP Site 1201 and DSDP Site 447, and many FABs. Abundances of fluid-mobile incompatible elements vary together and are correlated with subunits defined by flow margins and rock physical properties, suggesting control by post-eruptive seawater alteration rather than varying inputs of subduction fluids. Hf-Nd isotopes for Site 1438 basement basalts range from (present-day) ɛNd of 7.0 to 9.5 and ɛHf of 14.5 to 19.8 in a well-correlated array. Their more radiogenic Hf-isotope character could indicate an Indian-type MORB source, however, basalts with ɛHf >16.5, are more radiogenic than many Indian MORB. Pb isotope data will help distinguish differing mantle source domains and origins for fluid-mobile elements. Overall, the combined geochemical data indicate that the mantle source of basement basalts in drill sites west of the KPR (1438, 1201, 447) are closely similar to those for FAB, and that as a group, these rocks are more depleted than more than 90% of global MORB. Our interpretation is that both IBM forearc basalts and basalts from drill sites immediately west of the KPR formed by melting of the same uniquely depleted mantle source during subduction initiation. Melting may have been promoted by rapid decompression and by flux melting with a solute-poor hydrous subduction fluid. These basalts were erupted over a broad area in an extensional setting, which later narrowed as subduction and the subduction-related IBM volcanic arc became established.

Differential preservation in the geologic record of intraoceanic arc sedimentary and tectonic processes

USGS Publications Warehouse

Draut, Amy; Clift, Peter D.

2013-01-01

Records of ancient intraoceanic arc activity, now preserved in continental suture zones, are commonly used to reconstruct paleogeography and plate motion, and to understand how continental crust is formed, recycled, and maintained through time. However, interpreting tectonic and sedimentary records from ancient terranes after arc–continent collision is complicated by preferential preservation of evidence for some arc processes and loss of evidence for others. In this synthesis we examine what is lost, and what is preserved, in the translation from modern processes to the ancient record of intraoceanic arcs. Composition of accreted arc terranes differs as a function of arc–continent collision geometry. ‘Forward-facing’ collision can accrete an oceanic arc on to either a passive or an active continental margin, with the arc facing the continent and colliding trench- and forearc-side first. In a ‘backward-facing’ collision, involving two subduction zones with similar polarity, the arc collides backarc-first with an active continental margin. The preservation of evidence for contemporary sedimentary and tectonic arc processes in the geologic record depends greatly on how well the various parts of the arc survive collision and orogeny in each case. Preservation of arc terranes likely is biased towards those that were in a state of tectonic accretion for tens of millions of years before collision, rather than tectonic erosion. The prevalence of tectonic erosion in modern intraoceanic arcs implies that valuable records of arc processes are commonly destroyed even before the arc collides with a continent. Arc systems are most likely to undergo tectonic accretion shortly before forward-facing collision with a continent, and thus most forearc and accretionary-prism material in ancient arc terranes likely is temporally biased toward the final stages of arc activity, when sediment flux to the trench was greatest and tectonic accretion prevailed. Collision geometry and tectonic erosion vs. accretion are important controls on the ultimate survival of material from the trench, forearc, arc massif, intra-arc basins, and backarc basins, and thus on how well an ancient arc terrane preserves evidence for tectonic processes such as subduction of aseismic ridges and seamounts, oblique plate convergence, and arc rifting. Forward-facing collision involves substantial recycling, melting, and fractionation of continent-derived material during and after collision, and so produces melts rich in silica and incompatible trace elements. As a result, forward-facing collision can drive the composition of accreted arc crust toward that of average continental crust.

The tectono-sedimentary evolution of the Sivas ophiolite: Implications for pre to post-obduction processes in Anatolia

NASA Astrophysics Data System (ADS)

Legeay, Etienne; Mohn, Geoffroy; Callot, Jean-Paul; Ringenbach, Jean-Claude; Müntener, Othmar; Kavak, Kaan

2016-04-01

The Eastern Mediterranean in general and Turkey in particular preserve the remnants of several Neo-Tethysian oceanic basins consumed by north-dipping subductions during the Late Cretaceous prior to collision in the Paleogene. The Sivas basin, belonging to the Late Mesozoic to Cenozoic Central Anatolian basins, is located in a key position at the junction between 1) To the North, the Izmir-Ankara-Erzincan suture zone (IAESZ), 2) To the West, the Kırsehir block, 3) To the South, the Inner-Tauride suture zone (ITSZ). The obduction of ophiolite thrust sheets occurred during Campanian along the IAESZ, and ITSZ. We focus our study on the southern boundary of the Sivas basin, where an ophiolite sequence is capped by Late Cretaceous to Paleocene post-obduction sediments. We present new field observations, new U-Pb zircon dating on magmatic rocks and geochemistry analyses to unravel the pre-obduction nature and origin of the ophiolitic basement and to describe the post-obduction tectono-sedimentary evolution. The pre-obduction evolution show that: (i) the Southern Sivas ophiolite is characterized by highly serpentinized peridotites, with minor magmatic intrusions, (ii) the top of the ophiolite is marked by detachment faulting with ophicalcites, (iii) the U-Pb zircon ages of the magmatic intrusions are constrained at ˜90 Ma, (iv) geochemical data suggest a 'subduction signature' for the magmatic rocks. The, post-obduction evolution is characterized by the emplacement of Maastrichtian and Paleocene sediments carbonate platforms located on ophiolitic highs, associated to volcanoclastics turbidites in the trench northward in the Sivas Basin. These results show that the southern Sivas ophiolite represents magma starved system sharing similarities with present-day (ultra-)slow-spreading systems. This ophiolite belongs to the ITSZ, in contrast to ophiolites located 40km northward from the IAESZ. To resolve the complex paleogeographic framework of East-Anatolia during the Cenozoic, we integrated information from ophiolite related sedimentary data and propose a new interpretation of the Eastern Anatolian paleogeography based on forearc basin geometry, consistent with the development of adjacent supra-ophiolitic basins (Ulukisla, Darende and Hekimhan).

Paleomagnetic rotations and the Cenozoic tectonics of the Cascade Arc, Washington, Oregon, and California

USGS Publications Warehouse

Wells, R.E.

1990-01-01

Paleomagnetic results from Cenozoic (62-12 Ma) volcanic rocks of the Cascade Arc and adjacent areas indicate that moderate to large clockwise rotations are an important component of the tectonic history of the arc, Two mechanisms of rotation are suggested. The progressive increase in rotation toward the coast in arc and forearc rocks results from distributed dextral shear, which is likely driven by oblique subduction of oceanic plates to the west. Simple shear rotation is accommodated in the upper crust by strike-slip faulting. A progressive eastward shift of the arc volcanic front with time in the rotated arc terrane is the result of the westward pivoting of the arc block in front of a zone of extension since Eocene time. Westward migration of bimodal Basin and Range volcanism since at least 16 Ma is tracking rotation of the frontal arc block and growth of the Basin and Range in its wake. -from Author

Magnetic and gravity constraints on forearc upper crustal structure and composition, offshore northeast Japan

USGS Publications Warehouse

Finn, C.

1994-01-01

Marine magnetic and gravity data from the northeast Japan forearc offer insight to the subsurface structure, density and magnetization from which geologic interpretations and tectonic reconstructions can be made. Positive marine magnetic anomalies, on-land geology, drill hole data, and 2-1/2-dimensional models reveal that Kitakami plutons and possibly their associated volcanic rocks constitute part of the modern forearc basement and lie 100-150 km further east than previously thought. A method to create magnetization and density contrast maps was employed to produce a three-dimensional picture of the forearc basement rock properties averaged over a 14-km thickness. -Author

Paleozoic evolution of active margin basins in the southern Central Andes (northwestern Argentina and northern Chile)

NASA Astrophysics Data System (ADS)

Bahlburg, H.; Breitkreuz, C.

The geodynamic evolution of the Paleozoic continental margin of Gondwana in the region of the southern Central Andes is characterized by the westward progression of orogenic basin formation through time. The Ordovician basin in the northwest Argentinian Cordillera Oriental and Puna originated as an Early Ordovician back-arc basin. The contemporaneous magmatic arc of an east-dipping subduction zone was presumably located in northern Chile. In the back-arc basin, a ca. 3500 meter, fining-up volcaniclastic apron connected to the arc formed during the Arenigian. Increased subsidence in the late Arenigian allowed for the accomodation of large volumes of volcaniclastic turbidites during the Middle Ordovician. Subsidence and sedimentation were caused by the onset of collision between the para-autochthonous Arequipa Massif Terrane (AMT) and the South American margin at the Arenigian-Llanvirnian transition. This led to eastward thrusting of the arc complex over its back-arc basin and, consequently, to its transformation into a marine foreland basin. As a result of thrusting in the west, a flexural bulge formed in the east, leading to uplift and emergence of the Cordillera Oriental shelf during the Guandacol Event at the Arenigian-Llanvirnian transition. The basin fill was folded during the terminal collision of the AMT during the Oclóyic Orogeny (Ashgillian). The folded strata were intruded post-tectonically by the presumably Silurian granitoids of the "Faja Eruptiva de la Puna Oriental." The orogeny led to the formation of the positive area of the Arco Puneño. West of the Arco Puneño, a further marine basin developed during the Early Devonian, the eastern shelf of which occupied the area of the Cordillera Occidental, Depresión Preandina, and Precordillera. The corresponding deep marine turbidite basin was located in the region of the Cordillera de la Costa. Deposition continued until the basin fill was folded in the early Late Carboniferous Toco Orogeny. The basin originated as an extensional structure at the continental margin of Gondwana. Independent lines of evidence imply that basin evolution was not connected to subduction. Thus, the basin could not have been in a fore-arc position as previously postulated. Above the folded Devonian-Early Carboniferous strata, a continental volcanic arc developed from the Late Carboniferous to the Middle Triassic. It represents the link between the Choiyoi Province in central Chile and Argentina, and the Mitu Group rift in southern Peru. The volcanic arc succession is characterized by the prevalence of silicic lavas and tuffs and volcaniclastic sedimentary rocks. During the latest Carboniferous, a thick ostracod-bearing lacustrine unit formed in an extended lake in the area of the Depresión Preandina. This lake basin originated in an intra-arc tensional setting. During the Early Permian, marine limestones were deposited on a marine platform west and east of the volcanic arc, connected to the depositional area of the Copacabana Formation in southern Peru.

HVDC Ground Electrodes and Tectonic Setting

NASA Astrophysics Data System (ADS)

Freire, P. F.; Pereira, S. Y.

2017-12-01

Ground electrodes in HVDC transmission are huge grounding systems for the DC part of the converter substation, about 1 km wide, sized to inject in the ground DC currents up to 3.5 kA. This work presents an analysis of how the tectonic setting at converter substation location is determinant for the search of the best electrode location (Site Selection) and on its design and performance. It will briefly present the author experience on HVDC electrode design, summarized as follows: Itaipu - Foz do Iguaçu electrodes (transmitter side) located in the middle of Paraná Sedimentary Basin, and Ibiúna electrodes (receiving side) on the border of the basin, 6 km from the geological strike, where the crystalline basement outcrops in São Paulo state; Madeira River - North electrodes (transmitting side) located on the Northwest border of South Amazon Craton, where the crystalline basement is below a shallow sediments layer, and South electrodes (receiving side) located within Paraná Sedimentary Basin; Chile - electrodes located on the Andean forearc, where the Nazca Plate plunges under the South American Plate; Kenya - Ethiopia - electrodes located in the African Rift; Belo Monte - North electrodes (transmitter side) located within the Amazonian Sedimentary Basin, about 35 km of its South border, and South electrodes (receiving side) within Paraná Sedimentary Basin (bipole 1) and on crystalline metamorphic terrain "Brasília Belt" (bipole 2). This diversity of geological conditions results on ground electrodes of different topologies and dimensions, with quite different electrical and thermal performances. A brief study of the geology of the converter stations regions, the so-called Desktop Study, allows for the preview of several important parameters for the site selection and design of the electrodes, such as localization, type, size and estimate of the interference area, which are important predictors of the investment to be made and indications of the design to be developed.

Tectonics of the Philippine Sea plate before and after 52 Ma subduction initiation to form the Izu-Bonin-Mariana arc

NASA Astrophysics Data System (ADS)

Ishizuka, O.; Tani, K.; Harigane, Y.; Umino, S.; Stern, R. J.; Reagan, M. K.; Hickey-Vargas, R.; Yogodzinski, G. M.; Kusano, Y.; Arculus, R. J.

2016-12-01

Robust tectonic reconstruction of the evolving Philippine Sea Plate for the period immediately before and after subduction initiation 52 Ma to form the Izu-Bonin-Mariana (IBM) arc is prerequisite to understand cause of subduction initiation (SI) and test competing hypotheses for SI such as spontaneous or induced nucleation. Understanding of nature and origin of overriding and subducting plates is especially important because plate density is a key parameter controlling SI based on numerical modeling (e.g., Leng and Gurnis 2015). There is increasing evidence that multiple geological events related to changing stress fields took place in and around Philippine Sea plate about the time of SI 52 Ma (Ishizuka et al., 2011). For our understanding of the early IBM arc system to increase, it is important to understand the pattern and tempo of these geological events, particularly the duration and extent of seafloor spreading in the proto arc associated with SI, and its temporal relationship with spreading in the West Philippine Basin (WPB). IODP Exp. 351 provided evidence of SI-related seafloor spreading west of the Kyushu-Palau Ridge (Arculus et al., 2015). Planned age determination of the basement crust at Site U1438 will constrain the timing and geometry of SI-related spreading and its relationship to variation in mode of spreading in the WPB including rotation of spreading axis. Some tectonic reconstructions suggest that part of the IBM arc could have formed on "young" WPB crust. Dredging of the northern Mariana forearc crust and mantle in 2014 aimed to test this hypothesis. Preliminary data indicates that early arc crustal section of the N. Mariana forearc is geochemically and temporally similar to that exposed in the Bonin and southern Mariana forearcs. New tectonic reconstructions for the nascent IBM system will be presented based on these observations.

Brittle deformation along the Gulf of Alaska margin in response to Paleocene-Eocene triple junction migration: in Sisson

USGS Publications Warehouse

Haeussler, Peter J.; Bradley, Dwight C.; Goldfarb, Richard J.

2003-01-01

A spreading center was subducted diachronously along a 2200 km segment of what is now the Gulf of Alaska margin between 61 and 50 Ma, and left in its wake near-trench intrusions and high-T, low-P metamorphic rocks. Gold-quartz veins and dikes, linked to ridge subduction by geochronological and relative timing evidence, provide a record of brittle deformation during and after passage of the ridge. The gold-quartz veins are typically hosted by faults, and their regional extent indicates there was widespread deformation of the forearc above the slab window at the time of ridge subduction. Considerable variability in the strain pattern was associated with the slab window and the trailing plate. A diffuse network of dextral, sinistral, and normal faults hosted small lode-gold deposits (<50,000 oz) in south-central Alaska, whereas crustal-scale dextral faults in southeastern Alaska are spatially associated with large gold deposits (up to 800,000 oz).We interpret the gold-quartz veins as having formed above an eastward-migrating slab window, where the forearc crust responded to the diminishing influence of the forward subducting plate, the increasing influence of the trailing plate, and the thermal pulse and decreased basal friction from the slab window. In addition, extensional deformation of the forearc resulted from the diverging motions of the two oceanic plates at the margins of the slab window. Factors that complicate interpretations of fault kinematics and near-trench dike orientations include a change in plate motions at ca. 52 Ma, northward translation of the accretionary complex, oroclinal bending of the south-central Alaska margin, and subduction of transform segments. We find the pattern of syn-ridge subduction faulting in southern Alaska is remarkably similar to brittle faults near the Chile triple junction and to earthquake focal mechanisms in the Woodlark basin - the two modern sites of ridge subduction. Therefore, extensional and strike-slip deformation above slab windows may be a common occurrence.

Revisiting the structure, age, and evolution of the Wharton Basin to better understand subduction under Indonesia

NASA Astrophysics Data System (ADS)

Jacob, Jensen; Dyment, Jérôme; Yatheesh, V.

2014-01-01

the subduction processes along the Sunda Trench requires detailed constraints on the subducting lithosphere. We build a detailed tectonic map of the Wharton Basin based on reinterpretation of satellite-derived gravity anomalies and marine magnetic anomalies. The Wharton Basin is characterized by a fossil ridge, dated 36.5 Ma, offset by N-S fracture zones. Magnetic anomalies 18 to 34 (38-84 Ma) are identified on both flanks, although a large part of the basin has been subducted. We analyze the past plate kinematic evolution of the Wharton Basin by two-plate (India-Australia) and three-plate (India-Australia-Antarctica) reconstructions. Despite the diffuse plate boundaries within the Indo-Australian plate for the last 20 Ma, we obtain finite rotation parameters that we apply to reconstruct the subducted Wharton Basin and constrain the thickness, buoyancy, and rheology of the subducting plate. The lower subductability of younger lithosphere off Sumatra has important consequences on the morphology, with a shallower trench, forearc islands, and a significant inward deviation of the subduction system. This deviation decreases in the youngest area, where the Wharton fossil spreading center enters subduction: The discontinuous magmatic crust and serpentinized upper mantle, consequences of the slow spreading rates at which this area was formed, weaken the mechanical resistance to subduction and facilitate the restoration of the accretionary prism. Deeper effects include the possible creation of asthenospheric windows beneath the Andaman Sea, in relation to the long-offset fracture zones, and east of 105°E, as a result of subduction of the spreading center.

Early cretaceous topographic growth of the Lhasaplano, Tibetan plateau: Constraints from the Damxung conglomerate

NASA Astrophysics Data System (ADS)

Wang, Jian-Gang; Hu, Xiumian; Garzanti, Eduardo; Ji, Wei-Qiang; Liu, Zhi-Chao; Liu, Xiao-Chi; Wu, Fu-Yuan

2017-07-01

Constraining the timing of early topographic growth on the Tibetan plateau is critical for any models of India-Asia collision, Himalayan orogeny and subsequent plateau development in the Cenozoic. Stratigraphic, sedimentological and provenance analysis of the Lower Cretaceous red-beds of the Damxung Conglomerate provide new key information to reconstruct the paleogeography and the tectonic evolution of the Lhasa terrane at the time. The over 700-m-thick Damxung Conglomerate documents distal alluvial fan to braidplain sedimentation passing upward to proximal alluvial fan sedimentation. Deposition began near sea level, as documented by limestone beds occurring at the base of the unit. Zircon U-Pb dating of interbedded tuff layers constrain deposition age at ca. 111 Ma. Abundance of volcanic clasts, Cretaceous U-Pb ages and Hf isotopes of detrital zircons yielding mainly negative ɛHf(t) values together with paleocurrent data indicate an active volcanic source located in the North Lhasa subterrane. Pre-Mesozoic-aged zircon, recycled quartz and (meta) sedimentary rock fragments increase up-section, indicating progressive erosional exhumation of the Paleozoic sedimentary/metasedimentary basement. The Damxung Conglomerate thus records a significant uplift and unroofing stage in the source region, implying initial topographic growth on the Lhasa terrane at early Albian time. Early Cretaceous topographic growth on the Lhasa terrane is supported by the stratigraphic record in the Linzhou basin, the Xigaze forearc basin and the southern Nima basin. In contrast, marine strata in the central-western Lhasa terrane lasted until the early Cenomanian (ca. 96 Ma), indicating diachronous marine regression on the Lhasa terrane from east to west.

Geologic Assessment of Undiscovered Oil and Gas Resources of the North Cuba Basin, Cuba

USGS Publications Warehouse

Schenk, Christopher J.

2010-01-01

Petroleum generation in the North Cuba Basin is primarily the result of thrust loading of Jurassic and Cretaceous source rocks during formation of the North Cuba fold and thrust belt in the Late Cretaceous to Paleogene. The fold and thrust belt formed as Cuban arc-forearc rocks along the leading edge of the Caribbean plate translated northward during the opening of the Yucatan Basin and collided with the passive margin of southern North America in the Paleogene. Petroleum fluids generated during thrust loading migrated vertically into complex structures in the fold and thrust belt, into structures in the foreland basin, and possibly into carbonate reservoirs along the margins of the Yucatan and Bahama carbonate platforms. The U.S. Geological Survey (USGS) defined a Jurassic-Cretaceous Composite Total Petroleum System (TPS) and three assessment units (AU)-North Cuba Fold and Thrust Belt AU, North Cuba Foreland Basin AU, and the North Cuba Platform Margin Carbonate AU-within this TPS based mainly on structure and reservoir type (fig. 1). There is considerable geologic uncertainty as to the extent of petroleum migration that might have occurred within this TPS to form potential petroleum accumulations. Taking this geologic uncertainty into account, especially in the offshore area, the mean volumes of undiscovered resources in the composite TPS of the North Cuba Basin are estimated at (1) 4.6 billion barrels of oil (BBO), with means ranging from an F95 probability of 1 BBO to an F5 probability of 9 BBO; and (2) 8.6 trillion cubic feet of of gas (TCFG), of which 8.6 TCFG is associated with oil fields, and about 1.2 TCFG is in nonassociated gas fields in the North Cuba Foreland Basin AU.

Geologic Map of the Woodland Quadrangle, Clark and Cowlitz Counties, Washington

USGS Publications Warehouse

Evarts, Russell C.

2004-01-01

The Woodland 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 50 km north of Portland, Oregon (fig. 1). The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Woodland quadrangle lies at the northern edge of the Portland Basin, a roughly 2000-km2 topographic and structural depression that is the northernmost of several sediment-filled structural basins, which collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The Portland Basin is approximately 70 km long and 30 km wide; its long dimension is oriented northwest. Its northern boundary coincides, in part, with the lower Lewis River, which flows westward through the center of the quadrangle. The Lewis drains a large area in the southern Washington Cascade Range, including the southern flank of Mount St. Helens approximately 25 km upstream from the quadrangle, and joins the Columbia River about 6 km south of Woodland (fig. 1). Northwest of Woodland, the Columbia River exits the broad floodplain of the Portland Basin and flows northward through a relatively narrow bedrock valley at an elevation near sea level. The flanks of the Portland Basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but sediment deposited by streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction of the Pacific Plate along the Cascadia Subduction Zone (Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential field-anomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure may control the north-northwest-trending reach of the Columbia River between Portland and Longview (Blakely and others, 1995; Evarts, 2002; Evarts and others, 2002). This map is a contribution to a U.S. Geological Survey program designed to improve the geologic database for the Portland Basin part of the Pacific Northwest urban corridor,

Structural variability of the Tonga-Kermadec forearc characterized using robustly constrained geophysical data

NASA Astrophysics Data System (ADS)

Funnell, M. J.; Peirce, C.; Robinson, A. H.

2017-09-01

Subducting bathymetric anomalies enhance erosion of the overriding forearc crust. The deformation associated with this process is superimposed on pre-existing variable crustal and sedimentary structures developed as a subduction system evolves. Recent attempts to determine the effect and timescale of Louisville Ridge seamount subduction on the Tonga-Kermadec forearc have been limited by simplistic models of inherited overriding crustal structure that neglect along-strike variability. Synthesis of new robustly tested seismic velocity and density models with existing data sets from the region, highlight along-strike variations in the structure of the Tonga-Kermadec subducting and overriding plates. As the subducting plate undergoes bend-faulting and hydration throughout the trench-outer rise region, observed oceanic upper- and mid-crustal velocities are reduced by ∼1.0 km s-1 and upper mantle velocities by ∼0.5 km s-1. In the vicinity of the Louisville Ridge Seamount Chain (LRSC), the trench shallows by 4 km and normal fault throw is reduced by >1 km, suggesting that the subduction of seamounts reduces plate deformation. We find that the extinct Eocene frontal arc, defined by a high velocity (7.0-7.4 km s-1) and density (3.2 g cm-3) lower-crustal anomaly, increases in thickness by ∼6 km, from 12 to >18 km, over 300 km laterally along the Tonga-Kermadec forearc. Coincident variations in bathymetry and free-air gravity anomaly indicate a regional trend of northward-increasing crustal thickness that predates LRSC subduction, and highlight the present-day extent of the Eocene arc between 32°S and ∼18°S. Within this framework of existing forearc crustal structure, the subduction of seamounts of the LRSC promotes erosion of the overriding crust, forming steep, gravitationally unstable, lower-trench slopes. Trench-slope stability is most likely re-established by the collapse of the mid-trench slope and the trenchward side of the extinct Eocene arc, which, within the framework of forearc characterization, implies seamount subduction commenced at ∼22°S.

Paleomagnetic evidence from land-based and ODP cores for clockwise rotation and northward translation of the Phillippine Sea plate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cisowski, S.M.; Fuller, M.; Haston, R.B.

1990-06-01

On-land and deep-sea core paleomagnetic data have been collected from around the Philippine Sea plate. Data from the Palau islands suggest 70{degree} of clockwise rotation and northward translation since the mid-Oligocene. The authors interpret this rotation as a rotation of the West Philippine Sea basin as a whole. New paleomagnetic data from Guam indicate 70{degree} of clockwise rotation and northward translation since the early Oligocene. Although Eocene results have been previously quoted, the new data suggest that there is no reliable Eocene data from Guam. New data from Saipan suggest 50-60{degree} of clockwise rotation since the Late Eocene and 20{degree}more » of clockwise rotation since the mid-Miocene, along with northward translation. During ODP Leg 126, a new technique utilizing the formation microscanner logging tool was employed to obtain orientated drill cores from the Bonin forearc basin. Preliminary results indicate that 70-110{degree} of clockwise rotation has occurred there since the mid-Oligocene. Inclination studies on cores from ODP Legs 125 and 126 along with the on-land paleomagnetic data support 15{degree} of northward translation of the Philippine Sea plate since the mid-Oligocene. The consistent clockwise rotations found around the Philippine Sea plate suggest that the entire plate, including the Bonin and Mariana arcs, has rotated more than 50{degree} since the mid-Oligocene. The similarity of Oligocene results from the Bonin forearc and Guam suggest that little or no relative rotation has occurred between these two points. This implies that the shape of the Mariana arc is probably not due to rotational deformation. The northward translation and clockwise rotation of the Philippine Sea plate established oblique subduction along the proto-Philippine margin, which could account for the 600 km of subducted slab beneath the eastern Celebes Sea.« less

Exhumation of the Cordillera de Domeyko: Implications for Andean retroarc evolution between the Late Cretaceous and the Oligocene

NASA Astrophysics Data System (ADS)

Henriquez, S.; Carrapa, B.; DeCelles, P. G.

2017-12-01

In Cordilleran-type orogens, exhumation of the thrust belt records the kinematic history of the orogenic system. In the Central Andes, the widest and thickest part of this orogen, several authors have documented the exhumation of the thrust belt in the modern forearc (Chile) and retroarc region (Bolivia and Argentina) showing an overall eastward propagation of deformation since the late Eocene. However, the exhumation of earlier Andean retroarc tectonic events remains poorly documented. In the forearc, the Cordillera de Domeyko and Salar de Atacama basin exhibit multiple pieces of evidence for earlier Andean orogenesis. The goal of this study is to document the thermal record of Late Cretaceous to Eocene retroarc deformation. To this end, this study investigates the cooling history of the easternmost basement uplift of the Cordillera de Domeyko. We couple this record with detrital thermochronology from cobbles in the Late Cretaceous to Miocene sedimentary units from the Salar de Atacama basin which records the unroofing history of this uplift. We employed a multi-dating approach combining apatite fission track (AFT) and apatite (U-Th-Sm)/He (AHe) thermochronology to constrain the timing and amount of exhumation in the early Andean retroarc region. Our results show episodic cooling ca. 90-80, 65-60 and 45-40 Ma. This new data provides a thermochronologic record of Late Cretaceous and Paleocene deformation in the retroarc region as well as of the widely recognized Eocene deformation event. The cooling signal is interpreted to reflect exhumation controlled by uplift and erosion in the retroarc region. These exhumation events reflect episodes of internal deformation, crustal thickening, and roughly similar amounts of local erosion. Exhumation in this region decreased by the late Oligocene; by this time the orogenic front was established to the east, in the Eastern Cordillera.

Cold seeps and splay faults on Nankai margin

NASA Astrophysics Data System (ADS)

Henry, P.; Ashi, J.; Tsunogai, U.; Toki, T.; Kuramoto, S.; Kinoshita, M.; Lallemant, S. J.

2003-04-01

Cold seeps (bacterial mats, specific fauna, authigenic carbonates) are common on the Nankai margin and considered as evidence for seepage of methane bearing fluids. Camera and submersible surveys performed over the years have shown that cold seeps are generally associated with active faults. One question is whether part of the fluids expelled originate from the seismogenic zone and migrate along splay faults to the seafloor. The localisation of most cold seeps on the hanging wall of major thrusts may, however, be interpreted in various ways: (a) footwall compaction and diffuse flow (b) fluid channelling along the fault zone at depths and diffuse flow near the seafloor (c) erosion and channelling along permeable strata. In 2002, new observations and sampling were performed with submersible and ROV (1) on major thrusts along the boundary between the Kumano forearc basin domain and the accretionary wedge domain, (2) on a fault affecting the forearc (Kodaiba fault), (3) on mud volcanoes in the Kumano basin. In area (1) tsunami and seismic inversions indicate that the targeted thrusts are in the slip zone of the To-Nankai 1944 earthquakes. In this area, the largest seep zone, continuous over at least 2 km, coincides with the termination of a thrust trace, indicating local fluid channelling along the edge of the fault zone. Kodaiba fault is part of another splay fault system, which has both thrusting and strike-slip components and terminates westward into an en-echelon fold system. Strong seepage activity with abundant carbonates was found on a fold at the fault termination. One mud volcano, rooted in one of the en-echelon fold, has exceptionally high seepage activity compared with the others and thick carbonate crusts. These observations suggest that fluid expulsion along fault zones is most active at fault terminations and may be enhanced during fault initiation. Preliminary geochemical results indicate signatures differ between seep sites and suggests that the two fault systems tap in different sources.

Facies And Bedding Analysis of Deep-Marine, Arc-Related, Sediementary Rocks Cored on International Ocean Drilling Program Expedition 351.

NASA Astrophysics Data System (ADS)

Johnson, K. E.; Marsaglia, K. M.

2015-12-01

The Izu-Bonin-Mariana (IBM) Arc System, south of Japan, hosts a multitude of active and extinct (remnant) arc volcanic sediment sources. Core extracted adjacent to the proto-IBM arc (Kyushu-Palau Ridge; KPR) in the Amami-Sankaku Basin on International Ocean Discovery Program (IODP) Expedition 351 contains evidence of the variety of sediment sources that have existed in the area as a result of changing tectonic regimes through arc development, backarc basin formation and remnant arc abandonment. Approximately 1000 meters of Eocene to Oligocene volcaniclastic sedimentary rocks were analyzed via shipboard core photos, core descriptions, and thin sections with the intention of understanding the depositional history at this site. These materials contain a crucial record of arc development complementary to the Neogene history preserved in the active reararc (Expedition 350) and compressed whole-arc record in the current forearc (Expedition 352). A database of stratigraphic columns was created to display grain size trends, facies changes, and bedding characteristics. Individual beds (depositional events) were classified using existing and slightly modified classification schemes for muddy, sandy and gravel-rich gravity flow deposits, as well as muddy debris flows and tuffs. Utilizing the deep marine facies classes presented by Pickering et al. (1986), up section changes are apparent. Through time, as the arc developed, facies and bedding types and their proportions change dramatically and relatively abruptly. Following arc initiation facies are primarily mud-rich with intercalated tuffaceous sand. In younger intervals, sand to gravel gravity-flow deposits dominate, becoming more mud-rich. Muddy gravity flow deposits, however, dominate farther upsection. The overall coarsening-upward pattern (Unit III) is consistent with building of the arc edifice. Farther upsection (Unit II) an abrupt fining-upward trend represents the onset of isolation of the KPR as backarc spreading in the Shikoku Basin was initiated. This information will be combined with volcanic provenance and geochemical information from other studies, ultimately creating a deep-marine facies model for intraoceanic arc systems.

Forearc deformation and great subduction earthquakes: implications for cascadia offshore earthquake potential.

PubMed

McCaffrey, R; Goldfinger, C

1995-02-10

The maximum size of thrust earthquakes at the world's subduction zones appears to be limited by anelastic deformation of the overriding plate. Anelastic strain in weak forearcs and roughness of the plate interface produced by faults cutting the forearc may limit the size of thrust earthquakes by inhibiting the buildup of elastic strain energy or slip propagation or both. Recently discovered active strike-slip faults in the submarine forearc of the Cascadia subduction zone show that the upper plate there deforms rapidly in response to arc-parallel shear. Thus, Cascadia, as a result of its weak, deforming upper plate, may be the type of subduction zone at which great (moment magnitude approximately 9) thrust earthquakes do not occur.

NOAA Deepwater Exploration of the Marianas 2016: Pacific Plate, Mariana Trench, and Mariana Forearc

NASA Astrophysics Data System (ADS)

Fryer, P. B.; Glickson, D.; Kelley, C.; Drazen, J.; Stern, R. J.

2016-12-01

Legs 1 and 3 of NOAA Okeanos Explorer EX1605 made 18 (ROV) dives exploring the following: 7 Cretaceous-age, Pacific Plate guyots east of the Trench; 1 small volcano on a Pacific Plate fracture; 3 areas of the inner trench slope; 2 forearc serpentinite mud volcanoes; and 5 forearc fault blocks. The Pacific Plate guyots are heavily manganese encrusted. Part of the rationale for those dives was to make baseline characterization of biota and habitats before potential mining. These guyots had striking diversity and abundance of fauna. Dives on 2 guyots examined high-relief scarps, formed when both down-going plate and edifices fractured outboard of the trench. The scarp on one had Cretaceous reef sequences, whereas the other exposed layers of volcanics. The dive on a small (1 km diameter, 141 m high) volcano on a plate fracture near the trench affirmed that it was relatively young, maybe like Petit-Spot volcanoes east of the Japan Trench. A dive in a canyon west of Guam transitioned from a steep slope of volcanic talus to a gentle sediment-covered slope. The inner trench slope opposite the subducting guyot that exposes reef deposits, revealed similar sequences, suggesting that the guyot is being incorporated into the Mariana forearc. The other inner slope dive traversed talus with fragments of serpentinized peridotite and lies near a chain of forearc serpentinite mud volcanoes. The 2 serpentinite mud volcanoes explored have sedimented, apparently inactive, surfaces, though we recovered a serpentinized peridotite sample from one of them. Dives on the forearc fault blocks attest to dynamic vertical tectonism. Three in the northern forearc show sediment sequences of varying types and textures, all dipping trenchward. Spectacular mid-forearc fault scarps strike east-west, stair-stepping down southward and were traversed on 2 dives. We saw many sequences of indurated sediments. Mapping on Legs 2 and 3 of the expedition showed that these fault scarps are mirrored to the south by north-facing scarps. Thus, vertical tectonics on a grand scale has formed an immense and previously unknown graben across the forearc. These dive results provide a wealth of information for future research into the history of plate convergence processes associated with formation of the Mariana Trench in this Marine National Monument area.

Active and long-lived permanent forearc deformation driven by the subduction seismic cycle

NASA Astrophysics Data System (ADS)

Aron Melo, Felipe Alejandro

I have used geological, geophysical and engineering methods to explore mechanisms of upper plate, brittle deformation at active forearc regions. My dissertation particularly addresses the permanent deformation style experienced by the forearc following great subduction ruptures, such as the 2010 M w8.8 Maule, Chile and 2011 Mw9.0 Tohoku, Japan earthquakes. These events triggered large, shallow seismicity on upper plate normal faults above the rupture reaching Mw7.0. First I present new structural data from the Chilean Coastal Cordillera over the rupture zone of the Maule earthquake. The study area contains the Pichilemu normal fault, which produced the large crustal aftershocks of the megathrust event. Normal faults are the major neotectonic structural elements but reverse faults also exist. Crustal seismicity and GPS surface displacements show that the forearc experiences pulses of rapid coseismic extension, parallel to the heave of the megathrust, and slow interseismic, convergence-parallel shortening. These cycles, over geologic time, build the forearc structural grain, reactivating structures properly-oriented respect to the deformation field of each stage of the interplate cycle. Great subduction events may play a fundamental role in constructing the crustal architecture of extensional forearc regions. Static mechanical models of coseismic and interseismic upper plate deformation are used to explore for distinct features that could result from brittle fracturing over the two stages of the interplate cycle. I show that the semi-elliptical outline of the first-order normal faults along the Coastal Cordillera may define the location of a characteristic, long-lived megathrust segment. Finally, using data from the Global CMT catalog I analyzed the seismic behavior through time of forearc regions that have experienced great subduction ruptures >Mw7.7 worldwide. Between 61% and 83% of the cases where upper plate earthquakes exhibited periods of increased seismicity above background levels occurred contemporaneous to megathrust ruptures. That correlation is stronger for normal fault events than reverse or strike-slip crustal earthquakes. More importantly, for any given megathrust the summation of the Mw accounted by the forearc normal fault aftershocks appears to have a positive linear correlation with the Mw of the subduction earthquake -- the larger the megathrust the larger the energy released by forearc events.

Forearc serpentinites as probes into the chemical, petrological and biological diversity of subduction zones

NASA Astrophysics Data System (ADS)

Savov, I. P.

2017-12-01

The mantle region that cover the variously fluid-saturated and heated subducted slabs is a site where colossal serpentinization processes occur. Nowhere this is more evident than in the forearcs of convergent plate margins, where the amount of fluids leaving the slabs and intermingling with the overlaying mantle wedge is maximized. The nature of this forearc serpentinization processes can be studied at accretionary prisms, serpentinite mud volcanoes (ODP Sites 125 and 195; IODP Exp. 366- all in the Marianas), or via tectonically exhumed, Proterozoic to modern, forearc melange complexes worldwide (Greenland, California, Kamchatka, Armenia, Cuba, Colombia, among others). I shall review the marine and continental settings hosting forearc serpentinites (FS) with emphasis on the FS fluid and mineral chemistry, imaging of isotopes/elements/molecules and textures (via ToF SIMS), and the environment and the P-T conditions that may lead to stable microbial communities like the recently discovered one under S.Chamorro Seamount that suggests life can exist in the forearcs as deep as 12 km (Plumper et al., 2017; PNAS). FS are very similar to classical abyssal serpentinites (from FZ or TF on the seafloor). They have similar mineralogy, textures, are major reservoir of fluid mobile trace elements (B, Li, Cs, As, Sb, I, Br) and also are a host of often vast isotope fractionations (B, Li, I). Yet differences exist and need to be further explored as both of these serpentinite types may take part of the subducted slab inventory and affect the input-output budgets across the "Subduction Factory". FS are often associated with blueschists, which combined with the FS may help us more fully explore the P-T-t evolution of the entire forearc region.

Multi-Channel Seismic Images of the Mariana Forearc: EW0202 Initial Results

NASA Astrophysics Data System (ADS)

Oakley, A. J.; Goodliffe, A. M.; Taylor, B.; Moore, G. F.; Fryer, P.

2002-12-01

During the Spring of 2002, the Mariana Subduction Factory was surveyed using multi-channel seismics (MCS) as the first major phase of a US-Japanese collaborative NSF-MARGINS funded project. The resulting geophysical transects extend from the Pacific Plate to the West Mariana remnant arc. For details of this survey, including the results from the back-arc, refer to Taylor et al. (this session). The incoming Pacific Plate and its accompanying seamounts are deformed by plate flexure, resulting in extension of the upper crust as it enters the subduction zone. The resultant trench parallel faults dominate the bathymetry and MCS data. Beneath the forearc, in the southern transects near Saipan, the subducting slab is imaged to a distance of 50-60 km arcward. In addition to ubiquitous trench parallel normal faulting, a N-S transect of the forearc clearly shows normal faults perpendicular to the trench resulting from N-S extension. On the east side of the Mariana Ridge, thick sediment packages extend into the forearc. Directly east of Saipan and Tinian, a large, deeply scouring slide mass is imaged. Several serpentine mud volcanoes (Big Blue, Turquoise and Celestial) were imaged on the Mariana Forearc. Deep horizontal reflectors (likely original forearc crust) are imaged under the flanks of some of these seamounts. A possible "throat" reflector is resolved on multiple profiles at the summit of Big Blue, the northern-most seamount in the study area. The flanks of Turquoise seamount terminate in toe thrusts that represent uplift and rotation of surrounding sediments as the volcano grows outward. These thrusts form a basal ridge around the seamount similar to that previously noted encircling Conical Seamount. Furthermore, MCS data has revealed that some forearc highs previously thought to be fault blocks are in actuality mud volcanoes.

Forearc collapse, plate flexure, and seismicity within the downgoing plate along the Sunda Arc west of Sumatra

NASA Astrophysics Data System (ADS)

Craig, Timothy J.; Copley, Alex

2018-02-01

Deformation within the downgoing oceanic lithosphere seawards of subduction zones is typically characterised by regimes of shallow extension and deeper compression, due to the bending of the oceanic plate as it dips into the subduction zone. However, offshore Sumatra there are shallow compressional earthquakes within the downgoing oceanic plate outboard of the region of high slip in the 2004 Aceh-Andaman earthquake, occurring at the same depth as extensional faulting further seaward from the trench. A clear separation is seen in the location of intraplate earthquakes, with extensional earthquakes occurring further seawards than compressional earthquakes at the same depth within the plate. The adjacent section of the forearc prism west of Aceh is also anomalous in its morphology, characterised by a wide prism with a steep bathymetric front and broad, gradually-sloping top. This shape is in contrast to the narrower and more smoothly-sloping prism to the south, and along other subduction zones. The anomalous near-trench intraplate earthquakes and prism morphology are likely to be the result of the geologically-rapid gravitational collapse of the forearc, which leads to induced bending within the subducting plate, and the distinctive plateau-like morphology of the forearc. Such collapse of the forearc could be caused by changes through time of the material properties of the forearc rocks, or of the thickness of the sediments entering the subduction zone.

Age and provenance of Triassic to Cenozoic sediments of West and Central Sarawak, Malaysia

NASA Astrophysics Data System (ADS)

Breitfeld, H. Tim; Galin, Thomson; Hall, Robert

2015-04-01

Sarawak is located on the northern edge of Sundaland in NW Borneo. West and Central Sarawak include parts of the Kuching and Sibu Zones. These contain remnants of several sedimentary basins with ages from Triassic to Cenozoic. New light mineral, heavy mineral and U-Pb detrital zircon ages show differences in provenance reflecting the tectonic evolution of the region. The oldest clastic sediments are Triassic (Sadong Formation and its deep marine equivalent Kuching Formation). They were sourced by a Triassic (Carnian to Norian) volcanic arc and reworked Paleoproterozoic detritus derived from Cathaysialand. The Upper Jurassic to Cretaceous Pedawan Formation is interpreted as forearc basin fill with distinctive zircon populations indicating subduction beneath present-day West Sarawak which initiated in the Late Jurassic. Subsequent subduction until the early Late Cretaceous formed the Schwaner Mountains magmatic arc. After collision of SW Borneo and other microcontinental fragments with Sundaland in the early Late Cretaceous, deep marine sedimentation (Pedawan Formation) ceased, and there was uplift forming the regional Pedawan-Kayan unconformity. Two episodes of extension followed and were responsible for basin development on land in West Sarawak from the latest Cretaceous onwards, probably in a pull-apart setting. The first episode is associated with sediments of the Kayan Group, deposited in the Latest Cretaceous (Maastrichtian) to Eocene, and the second episode with Upper Eocene sediments of the Ketungau Basin. Zircon ages indicate volcanic activity throughout the Early Cenozoic in NW Borneo, and inherited zircon ages indicate reworking of Triassic and Cretaceous rocks. A large deep marine basin, the Rajang Basin, was north of the Lupar Line Fault in Central Sarawak (Sibu Zone) from the Late Cretaceous to the Late Eocene. Zircons from sediments of the Rajang Basin indicate they have similar ages and provenance to contemporaneous terrestrial sediments of the Kayan Group and Ketungau Basin to the south, suggesting a narrow steep continental Sundaland margin at the position of the Lupar Line, and a large-scale sedimentary connection between the terrestrial and deep marine basins in the Late Cretaceous to Late Eocene. A recent reconstruction for the proto-South China Sea proposed an isolated so-called Semitau terrane colliding with SW Borneo and Sundaland in the Late Eocene. Our data show that the area of the Kuching and Sibu Zones were connected with SW Borneo and Sundaland from the Cretaceous onwards. The Cretaceous and Cenozoic sedimentary basins were sourced by alternations of Schwaner Mountains and Malay Tin Belt rocks. Our new age and provenance data cannot be explained by an isolated Semitau terrane and a Late Eocene collision.

Accelerating late Quaternary uplift of the New Georgia Island Group (Solomon island arc) in response to subduction of the recently active Woodlark spreading center and Coleman seamount

NASA Astrophysics Data System (ADS)

Mann, Paul; Taylor, Frederick W.; Lagoe, Martin B.; Quarles, Andrew; Burr, G.

1998-10-01

The New Georgia Island Group of the Solomon Islands is one of four places where an active or recently active spreading ridge has subducted beneath an island arc. We have used coral reef terraces, paleobathymetry of Neogene sedimentary rocks, and existing marine geophysical data to constrain patterns of regional Quaternary deformation related to subduction of the recently active Woodlark spreading center and its overlying Coleman seamount. These combined data indicate the following vertical tectonic history for the central part of the New Georgia Island Group: (1) subsidence of the forearc region (Tetepare and Rendova Islands) to water depths of ˜1500 m and deposition of marine turbidites until after 270 ka; (2) late Quaternary uplift of the forearc to sea level and erosion of an unconformity; (3) subsidence of the forearc to ˜500 m BSL and deposition of bathyal sediments; and (4) uplift of the forearc above sea level with Holocene uplift rates up to at least 7.5 mm/yr on Tetepare and 5 mm/yr on Rendova. In the northeastern part of the New Georgia Island Group, our combined data indicate a slightly different tectonic history characterized by lower-amplitude vertical motions and a more recent change from subsidence to uplift. Barrier reefs formed around New Georgia and Vangunu Islands as they subsided >300 m. By 50-100 ka, subsidence was replaced by uplift that accelerated to Holocene rates of ˜1 mm/yr on the volcanic arc compared with rates up to ˜7.5 mm/yr in the forearc area of Tetepare and Rendova. Uplift mechanisms, such as thermal effects due to subduction of spreading ridges, tectonic erosion, or underplating of deeply subducted bathymetric features, are not likely to function on the 270-ka period that these uplift events have occurred in the New Georgia Island Group. A more likely uplift mechanism for the post-270-ka accelerating uplift of the forearc and volcanic arc of the New Georgia Island Group is progressive impingement of the Coleman seamount or other topographically prominent features on the subducting plate. Regional effects we relate to this ongoing subduction-related process include: (1) late Quaternary (post-270 ka), accelerating uplift of the Rendova-Tetepare forearc area in response to initial impingement of the Coleman seamount followed by exponentially increasing collisional contact between the forearc and seamount; (2) later Quaternary propagation of uplift arcward to include the volcanic arc as the area of collisional contact between the forearc and seamount increased; and (3) large-wavelength folding that has produced regional variations in late Holocene uplift rates observed in both forearc (southern Rendova, Tetepare) and volcanic arc (New Georgia Island) areas. We propose that the dominant tectonic effect of Coleman seamount impingement is horizontal shortening of the forearc and arc crust that is produced by strong coupling between the subducting seamount and the unsedimented crystalline forearc of the New Georgia Island Group. The horizontal forces due to mechanical resistance to subducting rugged ridge and seamount topography may have terminated spreading of the Woodlark spreading center entering the trench (Ghizo ridge) and converted it to a presently active strike-slip fault zone.

Comparison of Paleogene paleogeography: Southern Coast Ranges and western Transverse Ranges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schussler, S.A.

1991-02-01

The paleogene stratigraphic sequence exposed in the southwestern San Rafael Mountains at the southern terminus of the Coast Ranges, consists of up to 850 m (2,800 ft) of the marine limestone, sandstone, and mudstone that lies with a unique depositional contact upon Franciscan Complex rocks. Lithofacies identified represent four sedimentary environments: (1) foreslope talus deposits of a neritic algal bank (Sierra Blanca limestone), (2) bathyal basin plain and outer submarine fan deposits (Juncal/Anita Formation and Cozy Dell Shale), (3) suprafan lobe deposits of a bathyal submarine fan (lower Mitilija Sandstone), and (4) sublittoral shelf deposits (upper Matilija Sandstone). Similarities betweenmore » paleogene rocks in the southwest San Rafael mountains and the western Santa Ynez Mountains of the Transverse Ranges, approximately 60 km (40 mi) to the west, suggest deposition in a similar paleogeographic setting. Paleomagnetic data suggests post-Paleogene clockwise rotations of the western Transverse Ranges of 90{degree}+. Counterclockwise rotation of the western Transverse Ranges by this amount aligns the similar depositional sequences of the western Transverse Ranges with the northwest-trending Paleogene forearc basin of the southern Coast Ranges and eliminates the necessity for an east-west-oriented Paleogene basin at the site of the present western Transverse Ranges.« less

Controlling factors of stratigraphic occurrences of fine-grained turbidites: Examples from the Japanese waters

NASA Astrophysics Data System (ADS)

Ikehara, K.

2017-12-01

Fine-grained turbidite has been used for subaqueous paleoseismology, and has been recognized from shallow- to deep-water environments around the Japanese islands. Stratigraphic occurrence of fine-grained turbidites in the deepest Beppu Bay, south Japan, with its water depth of 75 m suggest clear influence of sea-level changes. Turbidite frequency was high during the post glacial sea-level rising and last 2.7 ka, and was low during the Holocene maximum sea-level highstand (5.3-2.7 ka). Retreat and progress of coastal delta front of the nearby river might affect the sediment supply to the deepest basin. On the other hand, fine-grained turbidites found in the forearc basins ( 3500 and 4500 m in water depths) and trench floor ( 6000 m in water depth) along the southern Ryukyu arc have no clear relation with sea-level changes. Sediment and bathymetric characteristics suggest that origin of these fine-grained turbidites is Taiwan. Remarkable tectonic uplift of Taiwanese coast with small mountainous rivers and narrow shelf may produce the continuous supply of fine-grained turbidites in this area. The Japan Trench floor composes of a series of small basins reflecting subducting horst-graben structure of the Pacific Plate. Each small basin acts as a natural sediment trap receiving the earthquake-induced turbidity currents. Thick fine-grained turbidites are also occurred in the small basins in the Japan Trench floor ( 7500 m in water depth). These are most likely induced by huge earthquakes along the Japan Trench. Thus, their stratigraphic occurrences might have close relation with recurrence of huge earthquakes in the past.

Provenance of a large Lower Cretaceous turbidite submarine fan complex on the active Laurasian margin: Central Pontides, northern Turkey

NASA Astrophysics Data System (ADS)

Akdoğan, Remziye; Okay, Aral I.; Sunal, Gürsel; Tari, Gabor; Meinhold, Guido; Kylander-Clark, Andrew R. C.

2017-02-01

The Pontides formed the southern active margin of Laurasia during the Mesozoic. They became separated from mainland Laurasia during the Late Cretaceous, with the opening of the Black Sea as an oceanic back-arc basin. During the Early Cretaceous, a large submarine turbidite fan complex developed in the Central Pontides. The turbidites cover an area of 400 km by 90 km with a thickness of more than 2 km. We have investigated the provenance of these turbidites-the Çağlayan Formation-using paleocurrent measurements, U-Pb detrital zircon ages, REE abundances of dated zircons and geochemistry of detrital rutile grains. 1924 paleocurrent measurements from 96 outcrop stations indicate flow direction from northwest to southeast in the eastern part of the Çağlayan Basin and from north-northeast to west-southwest in the western part. 1194 detrital zircon ages from 13 Lower Cretaceous sandstone samples show different patterns in the eastern, central and western parts of the basin. The majority of the U-Pb detrital zircon ages in the eastern part of the basin are Archean and Paleoproterozoic (61% of all zircon ages, 337 grains); rocks of these ages are absent in the Pontides and present in the Ukrainian Shield, which indicates a source north of the Black Sea. In the western part of the basin the majority of the zircons are Carboniferous and Neoproterozoic (68%, 246 grains) implying more local sources within the Pontides. The detrital zircons from the central part show an age spectrum as mixture of zircons from western and eastern parts. Significantly, Jurassic and Early Cretaceous zircons make up less than 2% of the total zircon population, which implies lack of a coeval magmatic arc in the region. This is compatible with the absence of the Lower Cretaceous granites in the Pontides. Thus, although the Çağlayan Basin occupied a fore-arc position above the subduction zone, the arc was missing, probably due to flat subduction, and the basin was largely fed from the Ukrainian Shield in the north. This also indicates that the Black Sea opened after the Early Cretaceous following the deposition of the Çağlayan Formation.

New evidence for Oligocene to Recent slip along the San Juan fault, a terrane-bounding structure within the Cascadia forearc of southern British Columbia, Canada

NASA Astrophysics Data System (ADS)

Harrichhausen, N.; Morell, K. D.; Regalla, C.; Lynch, E. M.

2017-12-01

Active forearc deformation in the southern Cascadia subduction zone is partially accommodated by faults in the upper crust in both Washington state and Oregon, but until recently, these types of active forearc faults have not been documented in the northern part of the Cascadia forearc on Vancouver Island, British Columbia. Here we present new evidence for Quaternary slip on the San Juan fault that indicates that this terrane-bounding structure has been reactivated since its last documented slip in the Eocene. Field work targeted by newly acquired hi-resolution lidar topography reveals a deformed debris flow channel network developed within colluvium along the central portion of the San Juan fault, consistent with a surface-rupturing earthquake with 1-2 m of offset since deglaciation 13 ka. Near the western extent of the San Juan fault, marine sediments are in fault contact with mélange of the Pandora Peak Unit. These marine sediments are likely Oligocene or younger in age, given their similarity in facies and fossil assemblages to nearby outcrops of the Carmanah Group sediments, but new dating using strontium isotope stratigraphy will confirm this hypothesis. If these sediments are part of the Carmanah Group, they occur further east and at a higher elevation than previously documented. The presence of Oligocene or younger marine sediments, more than 400 meters above current sea level, requires a substantial amount of Neogene rock uplift that could have been accommodated by slip on the San Juan fault. A preliminary analysis of fault slickensides indicates a change in slip sense from left-lateral to normal along the strike of the fault. Until further mapping and analysis is completed, however, it remains unclear whether this kinematic change reflects spatial and/or temporal variability. These observations suggest that the San Juan fault is likely part of a network of active faults accommodating forearc strain on Vancouver Island. With the recent discovery of Quaternary slip on another nearby terrane-bounding fault, the Leech River fault, it is essential that these faults are identified and studied, in order to both understand their role in forearc deformation and characterize the seismic hazard that they pose.

An inverted continental Moho and serpentinization of the forearc mantle.

PubMed

Bostock, M G; Hyndman, R D; Rondenay, S; Peacock, S M

2002-05-30

Volatiles that are transported by subducting lithospheric plates to depths greater than 100 km are thought to induce partial melting in the overlying mantle wedge, resulting in arc magmatism and the addition of significant quantities of material to the overlying lithosphere. Asthenospheric flow and upwelling within the wedge produce increased lithospheric temperatures in this back-arc region, but the forearc mantle (in the corner of the wedge) is thought to be significantly cooler. Here we explore the structure of the mantle wedge in the southern Cascadia subduction zone using scattered teleseismic waves recorded on a dense portable array of broadband seismometers. We find very low shear-wave velocities in the cold forearc mantle indicated by the exceptional occurrence of an 'inverted' continental Moho, which reverts to normal polarity seaward of the Cascade arc. This observation provides compelling evidence for a highly hydrated and serpentinized forearc region, consistent with thermal and petrological models of the forearc mantle wedge. This serpentinized material is thought to have low strength and may therefore control the down-dip rupture limit of great thrust earthquakes, as well as the nature of large-scale flow in the mantle wedge.

Heat Flow and Gas Hydrates on the Continental Margin of India: Building on Results from NGHP Expedition 01

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trehu, Anne; Kannberg, Peter

2011-06-30

The Indian National Gas Hydrate Program (NGHP) Expedition 01 presented the unique opportunity to constrain regional heat flow derived from seismic observations by using drilling data in three regions on the continental margin of India. The seismic bottom simulating reflection (BSR) is a well-documented feature in hydrate bearing sediments, and can serve as a proxy for apparent heat flow if data are available to estimate acoustic velocity and density in water and sediments, thermal conductivity, and seafloor temperature. Direct observations of temperature at depth and physical properties of the sediment obtained from drilling can be used to calibrate the seismicmore » observations, decreasing the uncertainty of the seismically-derived estimates. Anomalies in apparent heat flow can result from a variety of sources, including sedimentation, erosion, topographic refraction and fluid flow. We constructed apparent heat flow maps for portions of the Krishna-Godavari (K-G) basin, the Mahanadi basin, and the Andaman basin and modeled anomalies using 1-D conductive thermal models. Apparent heat flow values in the Krishna-Godavari (K-G) basin and Mahanadi basin are generally 0.035 to 0.055 watts per square meter (W/m2). The borehole data show an increase in apparent heat flow as water depth increases from 900 to 1500 m. In the SW part of the seismic grid, 1D modeling of the effect of sedimentation on heat flow shows that ~50% of the observed increase in apparent heat flow with increasing water depth can be attributed to trapping of sediments behind a "toe-thrust" ridge that is forming along the seaward edge of a thick, rapidly accumulating deltaic sediment pile. The remainder of the anomaly can be explained either by a decrease in thermal conductivity of the sediments filling the slope basin or by lateral advection of heat through fluid flow along stratigraphic horizons within the basin and through flexural faults in the crest of the anticline. Such flow probably plays a role in bringing methane into the ridge formed by the toe-thrust. Because of the small anomaly due to this process and the uncertainty in thermal conductivity, we did not model this process explicitly. In the NE part of the K-G basin seismic grid, a number of local heat flow lows and highs are observed, which can be attributed to topographic refraction and to local fluid flow along faults, respectively. No regional anomaly can be resolved. Because of lack of continuity between the K-G basin sites within the seismic grid and those ~70 km to the NE in water depths of 1200 to 1500 m, we do not speculate on the reason for higher heat flow at these depths. The Mahanadi basin results, while limited in geographic extent, are similar to those for the KG basin. The Andaman basin exhibits much lower apparent heat flow values, ranging from 0.015 to 0.025 W/m2. Heat flow here also appears to increase with increasing water depth. The very low heat flow here is among the lowest heat flow observed anywhere and gives rise to a very thick hydrate stability zone in the sediments. Through 1D models of sedimentation (with extremely high sedimentation rates as a proxy for tectonic thickening), we concluded that the very low heat flow can probably be attributed to the combined effects of high sedimentation rate, low thermal conductivity, tectonic thickening of sediments and the cooling effect of a subducting plate in a subduction zone forearc. Like for the K-G basin, much of the local variability can be attributed to topography. The regional increase in heat flow with water depth remains unexplained because the seismic grid available to us did not extend far enough to define the local tectonic setting of the slope basin controlling this observational pattern. The results are compared to results from other margins, both active and passive. While an increase in apparent heat flow with increasing water depth is widely observed, it is likely a result of different processes in different places. The very low heat flow due to sedimentation and tectonics in the Andaman basin is at the low end of global observations from forearc basins, possibly because of unusually high regional sedimentation rates and a high rate of tectonic deformation. In addition to providing an opportunity to follow up on preliminary results from NGHP-01, which was partially funded by DOE to increase understanding of submarine gas hydrates, a primary objective of this project was to provide training for a graduate student who had participated in the data acquisition as a technician. Our approach was to start with very simple analytic models to develop intuition about the relative importance of different parameters both as a learning exercise and to evaluate whether a more complex modeling effort could be constrained by the existing data.« less

Heat Flow and Gas Hydrates on the Continental Margin of India: Building on Results from NGHP Expedition 01

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anne Trehu; Peter Kannberg

2011-06-30

The Indian National Gas Hydrate Program (NGHP) Expedition 01 presented the unique opportunity to constrain regional heat flow derived from seismic observations by using drilling data in three regions on the continental margin of India. The seismic bottom simulating reflection (BSR) is a well-documented feature in hydrate bearing sediments, and can serve as a proxy for apparent heat flow if data are available to estimate acoustic velocity and density in water and sediments, thermal conductivity, and seafloor temperature. Direct observations of temperature at depth and physical properties of the sediment obtained from drilling can be used to calibrate the seismicmore » observations, decreasing the uncertainty of the seismically-derived estimates. Anomalies in apparent heat flow can result from a variety of sources, including sedimentation, erosion, topographic refraction and fluid flow. We constructed apparent heat flow maps for portions of the Krishna-Godavari (K-G) basin, the Mahanadi basin, and the Andaman basin and modeled anomalies using 1-D conductive thermal models. Apparent heat flow values in the Krishna-Godavari (K-G) basin and Mahanadi basin are generally 0.035 to 0.055 watts per square meter (W/m{sup 2}). The borehole data show an increase in apparent heat flow as water depth increases from 900 to 1500 m. In the SW part of the seismic grid, 1D modeling of the effect of sedimentation on heat flow shows that {approx}50% of the observed increase in apparent heat flow with increasing water depth can be attributed to trapping of sediments behind a 'toe-thrust' ridge that is forming along the seaward edge of a thick, rapidly accumulating deltaic sediment pile. The remainder of the anomaly can be explained either by a decrease in thermal conductivity of the sediments filling the slope basin or by lateral advection of heat through fluid flow along stratigraphic horizons within the basin and through flexural faults in the crest of the anticline. Such flow probably plays a role in bringing methane into the ridge formed by the toe-thrust. Because of the small anomaly due to this process and the uncertainty in thermal conductivity, we did not model this process explicitly. In the NE part of the K-G basin seismic grid, a number of local heat flow lows and highs are observed, which can be attributed to topographic refraction and to local fluid flow along faults, respectively. No regional anomaly can be resolved. Because of lack of continuity between the K-G basin sites within the seismic grid and those {approx}70 km to the NE in water depths of 1200 to 1500 m, we do not speculate on the reason for higher heat flow at these depths. The Mahanadi basin results, while limited in geographic extent, are similar to those for the K-G basin. The Andaman basin exhibits much lower apparent heat flow values, ranging from 0.015 to 0.025 W/m{sup 2}. Heat flow here also appears to increase with increasing water depth. The very low heat flow here is among the lowest heat flow observed anywhere and gives rise to a very thick hydrate stability zone in the sediments. Through 1D models of sedimentation (with extremely high sedimentation rates as a proxy for tectonic thickening), we concluded that the very low heat flow can probably be attributed to the combined effects of high sedimentation rate, low thermal conductivity, tectonic thickening of sediments and the cooling effect of a subducting plate in a subduction zone forearc. Like for the K-G basin, much of the local variability can be attributed to topography. The regional increase in heat flow with water depth remains unexplained because the seismic grid available to us did not extend far enough to define the local tectonic setting of the slope basin controlling this observational pattern. The results are compared to results from other margins, both active and passive. While an increase in apparent heat flow with increasing water depth is widely observed, it is likely a result of different processes in different places. The very low heat flow due to sedimentation and tectonics in the Andaman basin is at the low end of global observations from forearc basins, possibly because of unusually high regional sedimentation rates and a high rate of tectonic deformation. In addition to providing an opportunity to follow up on preliminary results from NGHP-01, which was partially funded by DOE to increase understanding of submarine gas hydrates, a primary objective of this project was to provide training for a graduate student who had participated in the data acquisition as a technician. Our approach was to start with very simple analytic models to develop intuition about the relative importance of different parameters both as a learning exercise and to evaluate whether a more complex modeling effort could be constrained by the existing data.« less

The Kinematics of Central American Fore-Arc Motion in Nicaragua: Geodetic, Geophysical and Geologic Study of Magma-Tectonic Interactions

NASA Astrophysics Data System (ADS)

La Femina, P. C.; Geirsson, H.; Saballos, A.; Mattioli, G. S.

2017-12-01

A long-standing paradigm in plate tectonics is that oblique convergence results in strain partitioning and the formation of migrating fore-arc terranes accommodated on margin-parallel strike-slip faults within or in close proximity to active volcanic arcs (e.g., the Sumatran fault). Some convergent margins, however, are segmented by margin-normal faults and margin-parallel shear is accommodated by motion on these faults and by vertical axis block rotation. Furthermore, geologic and geophysical observations of active and extinct margins where strain partitioning has occurred, indicate the emplacement of magmas within the shear zones or extensional step-overs. Characterizing the mechanism of accommodation is important for understanding short-term (decadal) seismogenesis, and long-term (millions of years) fore-arc migration, and the formation of continental lithosphere. We investigate the geometry and kinematics of Quaternary faulting and magmatism along the Nicaraguan convergent margin, where historical upper crustal earthquakes have been located on margin-normal, strike-slip faults within the fore arc and arc. Using new GPS time series, other geophysical and geologic data, we: 1) determine the location of the maximum gradient in forearc motion; 2) estimate displacement rates on margin-normal faults; and 3) constrain the geometric moment rate for the fault system. We find that: 1) forearc motion is 11 mm a-1; 2) deformation is accommodated within the active volcanic arc; and 3) that margin-normal faults can have rates of 10 mm a-1 in agreement with geologic estimates from paleoseismology. The minimum geometric moment rate for the margin-normal fault system is 2.62x107 m3 yr-1, whereas the geometric moment rate for historical (1931-2006) earthquakes is 1.01x107 m3/yr. The discrepancy between fore-arc migration and historical seismicity may be due to aseismic accommodation of fore-arc motion by magmatic intrusion along north-trending volcanic alignments within the volcanic arc.

Gravity signatures of terrane accretion

NASA Astrophysics Data System (ADS)

Franco, Heather; Abbott, Dallas

1999-01-01

In modern collisional environments, accreted terranes are bracketed by forearc gravity lows, a gravitational feature which results from the abandonment of the original trench and the initiation of a new trench seaward of the accreted terrane. The size and shape of the gravity low depends on the type of accreted feature and the strength of the formerly subducting plate. Along the Central American trench, the accretion of Gorgona Island caused a seaward trench jump of 48 to 66 km. The relict trench axes show up as gravity lows behind the trench with minimum values of -78 mgal (N of Gorgona) and -49 mgal (S of Gorgona) respectively. These forearc gravity lows have little or no topographic expression. The active trench immediately seaward of these forearc gravity lows has minimum gravity values of -59 mgal (N of Gorgona) and -58 mgal (S of Gorgona), respectively. In the north, the active trench has a less pronounced gravity low than the sediment covered forearc. In the Mariana arc, two Cretaceous seamounts have been accreted to the Eocene arc. The northern seamount is most likely a large block, the southern seamount may be a thrust slice. These more recent accretion events have produced modest forearc topographic and gravity lows in comparison with the topographic and gravity lows within the active trench. However, the minimum values of the Mariana forearc gravity lows are modest only by comparison to the Mariana Trench (-216 mgal); their absolute values are more negative than at Gorgona Island (-145 to -146 mgal). We speculate that the forearc gravity lows and seaward trench jumps near Gorgona Island were produced by the accretion of a hotspot island from a strong plate. The Mariana gravity lows and seaward trench jumps (or thrust slices) were the result of breaking a relatively weak plate close to the seamount edifice. These gravity lows resulting from accretion events should be preserved in older accreted terranes.

IODP Expedition 366 Reveals Widespread Seamount Subduction Effects in the Mariana Forearc

NASA Astrophysics Data System (ADS)

Fryer, P. B.; Wheat, C. G.; Williams, T.

2017-12-01

Numerous studies of the subduction of seamounts at accretionary convergent plate margins show considerable vertical tectonic deformation in the forearc region. This includes embayment of the trench axis, steepening of the inner trench slope, the creation of troughs in the wake of the seamount track beneath the forearc sediment wedge, but hypotheses regarding the seismogenic consequences of these processes are frequently at odds. In the nonaccretionary Mariana convergent plate margin, it is clear that ridges crosscut the entire forearc region in commensurate dimensions with thicker areas of subducting Pacific plate. Furthermore, to-date deep-sea drilling results on ODP Legs 125 and 195 and on IODP Expedition 366 recovered seamount materials from 5 serpentinite mud volcanoes over a 640 km along-strike distance, within 90 km west of the trench axis, and from 13 to 19 km depth to slab. The location of the serpentinite mud volcanoes is always associated with fault lineaments. The faulting creates the conduits for eruption of mixtures of fluids from the subduction channel and fault gouge from both the subduction channel and the forearc lithosphere. Cores from IODP 366 confirm that seamount subduction and deformation is a temporally and spatially pervasive process on the Mariana forearc. The new findings provide windows on a continuum of the evolution of plate and seamount subduction from the trench to nearly 20 km depth within the subduction channel. Cased boreholes were deployed at the summits of three active serpentinite mud volcanoes (Yinazao (Blue Moon), Asùt Tesoro (Big Blue), and Fantangisña (Celestial) Seamounts) during Expedition 366. These, plus the existing borehole observatory at ODP Site 1200C on the active summit of Conical Seamount provide a means to monitor processes of subduction related to serpentinite mud volcanism of the Mariana forearc. Such drilling results and borehole observations impact current paradigms of lithospheric deformation, mass cycling, and physical conditions within the subduction channel.

Helium as a tracer for fluids released from Juan de Fuca lithosphere beneath the Cascadia forearc

USGS Publications Warehouse

McCrory, Patricia A.; Constantz, James E.; Hunt, Andrew G.; Blair, James Luke

2016-01-01

The ratio between helium isotopes (3He/4He) provides an excellent geochemical tracer for investigating the sources of fluids sampled at the Earth's surface. 3He/4He values observed in 25 mineral springs and wells above the Cascadia forearc document a significant component of mantle-derived helium above Juan de Fuca lithosphere, as well as variability in 3He enrichment across the forearc. Sample sites arcward of the forearc mantle corner (FMC) generally yield significantly higher ratios (1.2-4.0 RA) than those seaward of the corner (0.03-0.7 RA). The highest ratios in the Cascadia forearc coincide with slab depths (40-45 km) where metamorphic dehydration of young oceanic lithosphere is expected to release significant fluid and where tectonic tremor occurs, whereas little fluid is expected to be released from the slab depths (25-30 km) beneath sites seaward of the corner.Tremor (considered a marker for high fluid pressure) and high RA values in the forearc are spatially correlated. The Cascadia tremor band is centered on its FMC, and we tentatively postulate that hydrated forearc mantle beneath Cascadia deflects a significant portion of slab-derived fluids updip along the subduction interface, to vent in the vicinity of its corner. Furthermore, high RA values within the tremor band just arcward of the FMC, suggest that the innermost mantle wedge is relatively permeable.Conceptual models require: (1) a deep fluid source as a medium to transport primordial 3He; (2) conduits through the lithosphere which serve to speed fluid ascent to the surface before significant dilution from radiogenic 4He can occur; and (3) near lithostatic fluid pressure to keep conduits open. Our spatial correlation between high RA values and tectonic tremor provides independent evidence that tremor is associated with deep fluids, and it further suggests that high pore pressures associated with tremor may serve to keep fractures open for 3He migration through ductile upper mantle and lower crust.

Transfer of Metasupracrustal Rocks to Midcrustal Depths in the North Cascades Continental Magmatic Arc, Skagit Gneiss Complex, Washington

NASA Astrophysics Data System (ADS)

Sauer, K. B.; Gordon, S. M.; Miller, R. B.; Vervoort, J. D.; Fisher, C. M.

2017-12-01

The metasupracrustal units within the north central Chelan block of the North Cascades Range, Washington, are investigated to determine mechanisms and timescales of supracrustal rock incorporation into the deep crust of continental magmatic arcs. Zircon U-Pb and Hf-isotope analyses were used to characterize the protoliths of metasedimentary and metaigneous rocks from the Skagit Gneiss Complex, metasupracrustal rocks from the Cascade River Schist, and metavolcanic rocks from the Napeequa Schist. Skagit Gneiss Complex metasedimentary rocks have (1) a wide range of zircon U-Pb dates from Proterozoic to latest Cretaceous and (2) a more limited range of dates, from Late Triassic to latest Cretaceous, and a lack of Proterozoic dates. Two samples from the Cascade River Schist are characterized by Late Cretaceous protoliths. Amphibolites from the Napeequa Schist have Late Triassic protoliths. Similarities between the Skagit Gneiss metasediments and accretionary wedge and forearc sediments in northwestern Washington and Southern California indicate that the protolith for these units was likely deposited in a forearc basin and/or accretionary wedge in the Early to Late Cretaceous (circa 134-79 Ma). Sediment was likely underthrust into the active arc by circa 74-65 Ma, as soon as 7 Ma after deposition, and intruded by voluminous magmas. The incorporation of metasupracrustal units aligns with the timing of major arc magmatism in the North Cascades (circa 79-60 Ma) and may indicate a link between the burial of sediments and pluton emplacement.

Identifying block structure in the Pacific Northwest, USA

USGS Publications Warehouse

Savage, James C.; Wells, Ray E.

2015-01-01

We have identified block structure in the Pacific Northwest (west of 116°W between 38°N and 49°N) by clustering GPS stations so that the same Euler vector approximates the velocity of each station in a cluster. Given the total number k of clusters desired, the clustering procedure finds the best assignment of stations to clusters. Clustering is calculated for k= 2 to 14. In geographic space, cluster boundaries that remain relatively stable as k is increased are tentatively identified as block boundaries. That identification is reinforced if the cluster boundary coincides with a geologic feature. Boundaries identified in northern California and Nevada are the Central Nevada Seismic Belt, the west side of the Northern Walker Lane Belt, and the Bartlett Springs Fault. Three blocks cover all of Oregon and Washington. The principal block boundary there extends west-northwest along the Brothers Fault Zone, then north and northwest along the eastern boundary of Siletzia, the accreted oceanic basement of the forearc. East of this boundary is the Intermountain block, its eastern boundary undefined. A cluster boundary at Cape Blanco subdivides the forearc along the faulted southern margin of Siletzia. South of Cape Blanco the Klamath Mountains-Basin and Range block extends east to the Central Nevada Seismic Belt and south to the Sierra Nevada-Great Valley block. The Siletzia block north of Cape Blanco coincides almost exactly with the accreted Siletz terrane. The cluster boundary in the eastern Olympic Peninsula may mark permanent shortening of Siletzia against the Intermountain block.

Paleoseismic events inferred from marine seismogenic turbidites of the eastern Nankai Trough

NASA Astrophysics Data System (ADS)

Okutsu, N.; Ashi, J.; Omura, A.; Yamaguchi, A.; Suganuma, Y.; Kanamatsu, T.; Murayama, M.

2016-12-01

Paleoseismology using marine seismogenic turbidites is a developing field especially in subduction margins. However, very fine-grained turbidites are difficult to distinguish from hemipelagic mud. The primary focus of this study is to understand the characteristics of the muddy turbidites. The second focus is to discuss the muddy turbidites distributions and their ages from a longer sediment core, and understand the paleoseismic records of eastern Nankai Trough, Japan. The samples used in this study include multiple cores and a piston core which were collected from the sedimentary basin southwest off Kii Peninsula during the R/V Shinsei Maru KS-14-8 cruise. The sampling site is located at the ENE-WSW elongated basin between the accretionary prism and the forearc basin off Kumano without terrestrial sediment supply. The basin exhibits a terminal basin that captures all sediments supplied from outside. From the multiple core samples, the Cs-137 and Pb- 210 concentration distribution indicates that the muddy sediment layer in the upper 17 cm was formed from the 2004 off the Kii Peninsula earthquake. Visual observation and X-ray CT scans were conducted alongside other measurements for anisotropy of magnetic susceptibility (AMS), paleomagnetism, rock magnetism, electrical resistivity, and X-ray fluorescence core scanning (XRF). Muddy seismogenic turbidites associated with the 2004 off the Kii Peninsula earthquake have thick homogeneous clay layer above the silty lamination. The magnetic susceptibility decreases upwards in the lamination. This specific feature is thought to have formed as the muddy turbiditity current slowly decelerated and slowly settled down the slope. From the results of XRF core scanning, Ca and Fe have a peak at basement of turbidites, and decrease upwards. Ca is thought to correspond to amount of the foraminiferas. In piston core, we observed the same sedimentary and magnetic characteristics as the multiple cores. Based on stratigraphic information from volcanic ash and radiocarbon age of the foraminifera, intercalation pattern of muddy turbidite layers almost consistent with the known past earthquake recurrence times in the Nankai subduction margin. Reversed age recognized beneath the thick turbidite layer suggests reworking of landslide deposits probably due to the strong shaking.

Quaternary Tectonic and Climatic Processes shaping the Central Andean hyperarid forearc (southern Peru)

NASA Astrophysics Data System (ADS)

Audin, Laurence; Benavente, Carlos; Zerathe, Swann; Saillard, Marianne; Hall, Sarah R.; Farber, Daniel L.

2015-04-01

Understanding the forearc structure and processes related to Quaternary evolution and uplift of the Western Andean Cordillera remains an outstanding scientific issue. Models of Andean Plateau evolution based on Tertiary volcanic stratigraphy since 5Ma suggest that the deformation was focused along the eastern margin of the plateau and that minimal uplift occurred along the Pacific margin. On the contrary, new tectonic data and Quaternary surface 10Be dating highlight the presence of recently active deformation, incision and alluvial processes within the upper Andean forearc together with a regional uplift of the coastal zone. Additionally, the high obliquity observed in the northern Arica Bend region makes it an ideal target to discuss whether partitioning of the oblique convergence is accommodated by the neotectonic features that dissect the Quaternary forearc. Our goals are both to decipher the Quaternary tectonic and climatic processes shaping the hyperarid forearc along strike and across strike. Finally, we aim to quantify the respective influence of these factors in the overall uplift of the Western Andes. Indeed, sequences of pediment surfaces, landslide products, paleolake deposits and marine terraces found along the oblique Peruvian margin are a unique set of datable markers that can be used to quantify the rates of Quaternary processes. In this study, we focus on the southern Peru hyperarid Atacama area where regional surfaces and tectonic markers (scarps, folds, temporary streams and paleolake levels offsets…) are well preserved for the Quaternary timescale. Numerous landsliding events align on the major fault segments and reflect Plio-Pleistocene climatic and tectonic activity together with filled and strath terraces. As the present day sea-level is one of the highest levels recorded for Quaternary time span, any emerged marine terrace is preserved by tectonic coastal uplift. In particular, the geomorphic and chronologic correlation between marine and continental planation surfaces or terraces permit to deduce net vertical rates and suggests that the along strike uplift affected not only the coast but also the overall ~50 km-wide forearc of the Western Andes. We produced a chronology of remnant low-relief surfaces and a new neotectonic map of the Central Andean forearc between ~14° and 18°S based on detailed field mapping and 10Be cosmogenic dating. We address 1) the spatial and temporal correlations of various markers, and 2) the correlation of the surface abandonment ages to various regional climatic events and 3) the description of neotectonic activity accommodating both uplift and partitioning. Multiple markers yield 10Be surface abandonment ages that spanning 35 ka to >2 Ma. Erosion surfaces >2 Ma yield low erosion rates of <0.1mm/yr. However uplift rates of ~0.1-1mm/yr and multiple surfaces dated at ~35 ka suggest that the hyperarid forearc landscape has been recently modified through Quaternary surface uplift and climatic events, contradicting the Miocene fossil forearc hypothesis. Generally, surface abandonment ages and activated landslides periods tend to correlate with cold wet periods preceding Plio Pleistocene deglaciation on the Altiplano. Finally, neotectonic oblique faults connecting at depth participate to topography building in the Arica Bend region and suggest that Quaternary surface abandonment is the result of both surface uplift in the forearc and specific high-discharge climate periods in the high Andes. Obtained Quaternary regional uplift rates and individual slip-rates suggest that the Andean forearc may accommodate as much as 0.5 to 1 mm/yr of regional uplift for the Quaternary time period.

Eocene extensional exhumation of basement and arc rocks along southwesternmost Peru, Central Andes.

NASA Astrophysics Data System (ADS)

Noury, Mélanie; Bernet, Matthias; Sempéré, Thierry

2014-05-01

The overthickened crust of the current Central Andes is commonly viewed as the result of tectonic shortening. However, in the present-day terrestrial forearc and arc of southwesternmost Peru, crustal thickness increases from 30 km along the coastline to >60 km below the active arc, whereas the upper crust exhibits little to no evidence of crustal shortening and, in constrast, many extensional features. How (and when) crustal overthickness was acquired in this region is thus little understood. Because crustal overthickening often results in extensional collapse and/or significant erosion, here we address this issue through a regional-scale study of exhumation using fission-track thermochronology. The limited fission-track data previously available in the area suggested that exhumation began during the Mesozoic. In this study, we present new apatite and zircon fission-track data obtained along the current terrestrial forearc of southwesternmost Peru. This relatively restricted area presents the interest of providing extensive outcrops of Precambrian to Ordovician basement and Early Jurassic to Late Cretaceous arc plutons. In order to compare the chronology of exhumation of these units, we performed extensive sampling for fission-track dating, as well as structural mapping. Our results indicate that the basement rocks and Jurassic plutons that crop out in the Arequipa region, where the crust is now >50 km-thick, experienced a rapid cooling through the 240-110°C temperature range between ~65 and ~35 Ma. This period of rapid exhumation coincided in time with the accumulation of terrestrial forearc deposits (the Lower Moquegua Group), that exhibit many syn-sedimentary extensional features and are bounded by conspicuous normal faults, specifically along the region where intense activity of the main arc between ~90 and ~60 Ma had led to voluminous magma emplacement. This close succession of (1) intense magmatic activity and (2) regional-scale exhumation associated with extensional basins leads us to propose that arc magmatism between ~90 and ~60 Ma was productive enough to significantly thicken the crust, resulting in its subsequent extensional collapse between ~60 and ~35 Ma.

Subduction zone forearc serpentinites as incubators for deep microbial life

NASA Astrophysics Data System (ADS)

Plümper, Oliver; King, Helen E.; Geisler, Thorsten; Liu, Yang; Pabst, Sonja; Savov, Ivan P.; Rost, Detlef; Zack, Thomas

2017-04-01

Serpentinization-fueled systems in the cool, hydrated forearc mantle of subduction zones may provide an environment that supports deep chemolithoautotrophic life. Here, we examine serpentinite clasts expelled from mud volcanoes above the Izu-Bonin-Mariana subduction zone forearc (Pacific Ocean) that contain complex organic matter and nanosized Ni-Fe alloys. Using time-of-flight secondary ion mass spectrometry and Raman spectroscopy, we determined that the organic matter consists of a mixture of aliphatic and aromatic compounds and functional groups such as amides. Although an abiotic or subduction slab-derived fluid origin cannot be excluded, the similarities between the molecular signatures identified in the clasts and those of bacteria-derived biopolymers from other serpentinizing systems hint at the possibility of deep microbial life within the forearc. To test this hypothesis, we coupled the currently known temperature limit for life, 122 °C, with a heat conduction model that predicts a potential depth limit for life within the forearc at ˜10,000 m below the seafloor. This is deeper than the 122 °C isotherm in known oceanic serpentinizing regions and an order of magnitude deeper than the downhole temperature at the serpentinized Atlantis Massif oceanic core complex, Mid-Atlantic Ridge. We suggest that the organic-rich serpentinites may be indicators for microbial life deep within or below the mud volcano. Thus, the hydrated forearc mantle may represent one of Earth’s largest hidden microbial ecosystems. These types of protected ecosystems may have allowed the deep biosphere to thrive, despite violent phases during Earth’s history such as the late heavy bombardment and global mass extinctions.

An imbalance in the deep water cycle at subduction zones: The potential importance of the fore-arc mantle

NASA Astrophysics Data System (ADS)

Ribeiro, Julia M.; Lee, Cin-Ty A.

2017-12-01

The depth of slab dehydration is thought to be controlled by the thermal state of the downgoing slab: cold slabs are thought to mostly dehydrate beneath the arc front while warmer slabs should mostly dehydrate beneath the fore-arc. Cold subduction zone lavas are thus predicted to have interacted with greater extent of water-rich fluids released from the downgoing slab, and should thus display higher water content and be elevated in slab-fluid proxies (i.e., high Ba/Th, H2O/Ce, Rb/Th, etc.) compared to hot subduction zone lavas. Arc lavas, however, display similar slab-fluid signatures regardless of the thermal state of the slab, suggesting more complexity to volatile cycling in subduction zones. Here, we explore whether the serpentinized fore-arc mantle may be an important fluid reservoir in subduction zones and whether it can contribute to arc magma generation by being dragged down with the slab. Using simple mass balance and fluid dynamics calculations, we show that the dragged-down fore-arc mantle could provide enough water (∼7-78% of the total water injected at the trenches) to account for the water outfluxes released beneath the volcanic arc. Hence, we propose that the water captured by arc magmas may not all derive directly from the slab, but a significant component may be indirectly slab-derived via dehydration of dragged-down fore-arc serpentinites. Fore-arc serpentinite dehydration, if universal, could be a process that explains the similar geochemical fingerprint (i.e., in slab fluid proxies) of arc magmas.

Cascadia subducting plate fluids channelled to fore-arc mantle corner: ETS and silica deposition

USGS Publications Warehouse

Hyndman, Roy D.; McCrory, Patricia A.; Wech, Aaron; Kao, Han; Ague, Jay

2015-01-01

In this study we first summarize the constraints that on the Cascadia subduction thrust, there is a 70 km gap downdip between the megathrust seismogenic zone and the Episodic Tremor and Slip (ETS) that lies further landward; there is not a continuous transition from unstable to conditionally stable sliding. Seismic rupture occurs mainly offshore for this hot subduction zone. ETS lies onshore. We then suggest what does control the downdip position of ETS. We conclude that fluids from dehydration of the downgoing plate, focused to rise above the fore-arc mantle corner, are responsible for ETS. There is a remarkable correspondence between the position of ETS and this corner along the whole margin. Hydrated mineral assemblages in the subducting oceanic crust and uppermost mantle are dehydrated with downdip increasing temperature, and seismic tomography data indicate that these fluids have strongly serpentinized the overlying fore-arc mantle. Laboratory data show that such fore-arc mantle serpentinite has low permeability and likely blocks vertical expulsion and restricts flow updip within the underlying permeable oceanic crust and subduction shear zone. At the fore-arc mantle corner these fluids are released upward into the more permeable overlying fore-arc crust. An indication of this fluid flux comes from low Poisson's Ratios (and Vp/Vs) found above the corner that may be explained by a concentration of quartz which has exceptionally low Poisson's Ratio. The rising fluids should be silica saturated and precipitate quartz with decreasing temperature and pressure as they rise above the corner.

Subduction zone forearc serpentinites as incubators for deep microbial life.

PubMed

Plümper, Oliver; King, Helen E; Geisler, Thorsten; Liu, Yang; Pabst, Sonja; Savov, Ivan P; Rost, Detlef; Zack, Thomas

2017-04-25

Serpentinization-fueled systems in the cool, hydrated forearc mantle of subduction zones may provide an environment that supports deep chemolithoautotrophic life. Here, we examine serpentinite clasts expelled from mud volcanoes above the Izu-Bonin-Mariana subduction zone forearc (Pacific Ocean) that contain complex organic matter and nanosized Ni-Fe alloys. Using time-of-flight secondary ion mass spectrometry and Raman spectroscopy, we determined that the organic matter consists of a mixture of aliphatic and aromatic compounds and functional groups such as amides. Although an abiotic or subduction slab-derived fluid origin cannot be excluded, the similarities between the molecular signatures identified in the clasts and those of bacteria-derived biopolymers from other serpentinizing systems hint at the possibility of deep microbial life within the forearc. To test this hypothesis, we coupled the currently known temperature limit for life, 122 °C, with a heat conduction model that predicts a potential depth limit for life within the forearc at ∼10,000 m below the seafloor. This is deeper than the 122 °C isotherm in known oceanic serpentinizing regions and an order of magnitude deeper than the downhole temperature at the serpentinized Atlantis Massif oceanic core complex, Mid-Atlantic Ridge. We suggest that the organic-rich serpentinites may be indicators for microbial life deep within or below the mud volcano. Thus, the hydrated forearc mantle may represent one of Earth's largest hidden microbial ecosystems. These types of protected ecosystems may have allowed the deep biosphere to thrive, despite violent phases during Earth's history such as the late heavy bombardment and global mass extinctions.

Subduction zone forearc serpentinites as incubators for deep microbial life

PubMed Central

Plümper, Oliver; Geisler, Thorsten; Liu, Yang; Pabst, Sonja; Savov, Ivan P.; Rost, Detlef; Zack, Thomas

2017-01-01

Serpentinization-fueled systems in the cool, hydrated forearc mantle of subduction zones may provide an environment that supports deep chemolithoautotrophic life. Here, we examine serpentinite clasts expelled from mud volcanoes above the Izu–Bonin–Mariana subduction zone forearc (Pacific Ocean) that contain complex organic matter and nanosized Ni–Fe alloys. Using time-of-flight secondary ion mass spectrometry and Raman spectroscopy, we determined that the organic matter consists of a mixture of aliphatic and aromatic compounds and functional groups such as amides. Although an abiotic or subduction slab-derived fluid origin cannot be excluded, the similarities between the molecular signatures identified in the clasts and those of bacteria-derived biopolymers from other serpentinizing systems hint at the possibility of deep microbial life within the forearc. To test this hypothesis, we coupled the currently known temperature limit for life, 122 °C, with a heat conduction model that predicts a potential depth limit for life within the forearc at ∼10,000 m below the seafloor. This is deeper than the 122 °C isotherm in known oceanic serpentinizing regions and an order of magnitude deeper than the downhole temperature at the serpentinized Atlantis Massif oceanic core complex, Mid-Atlantic Ridge. We suggest that the organic-rich serpentinites may be indicators for microbial life deep within or below the mud volcano. Thus, the hydrated forearc mantle may represent one of Earth’s largest hidden microbial ecosystems. These types of protected ecosystems may have allowed the deep biosphere to thrive, despite violent phases during Earth’s history such as the late heavy bombardment and global mass extinctions. PMID:28396389

Dehalogenation Activities and Distribution of Reductive Dehalogenase Homologous Genes in Marine Subsurface Sediments▿ †

PubMed Central

Futagami, Taiki; Morono, Yuki; Terada, Takeshi; Kaksonen, Anna H.; Inagaki, Fumio

2009-01-01

Halogenated organic compounds serve as terminal electron acceptors for anaerobic respiration in a diverse range of microorganisms. Here, we report on the widespread distribution and diversity of reductive dehalogenase homologous (rdhA) genes in marine subsurface sediments. A total of 32 putative rdhA phylotypes were detected in sediments from the southeast Pacific off Peru, the eastern equatorial Pacific, the Juan de Fuca Ridge flank off Oregon, and the northwest Pacific off Japan, collected at a maximum depth of 358 m below the seafloor. In addition, significant dehalogenation activity involving 2,4,6-tribromophenol and trichloroethene was observed in sediment slurry from the Nankai Trough Forearc Basin. These results suggest that dehalorespiration is an important energy-yielding pathway in the subseafloor microbial ecosystem. PMID:19749069

Dehalogenation activities and distribution of reductive dehalogenase homologous genes in marine subsurface sediments.

PubMed

Futagami, Taiki; Morono, Yuki; Terada, Takeshi; Kaksonen, Anna H; Inagaki, Fumio

2009-11-01

Halogenated organic compounds serve as terminal electron acceptors for anaerobic respiration in a diverse range of microorganisms. Here, we report on the widespread distribution and diversity of reductive dehalogenase homologous (rdhA) genes in marine subsurface sediments. A total of 32 putative rdhA phylotypes were detected in sediments from the southeast Pacific off Peru, the eastern equatorial Pacific, the Juan de Fuca Ridge flank off Oregon, and the northwest Pacific off Japan, collected at a maximum depth of 358 m below the seafloor. In addition, significant dehalogenation activity involving 2,4,6-tribromophenol and trichloroethene was observed in sediment slurry from the Nankai Trough Forearc Basin. These results suggest that dehalorespiration is an important energy-yielding pathway in the subseafloor microbial ecosystem.

Stress interaction between subduction earthquakes and forearc strike-slip faults: Modeling and application to the northern Caribbean plate boundary

USGS Publications Warehouse

ten Brink, Uri S.; Lin, J.

2004-01-01

Strike-slip faults in the forearc region of a subduction zone often present significant seismic hazard because of their proximity to population centers. We explore the interaction between thrust events on the subduction interface and strike-slip faults within the forearc region using three-dimensional models of static Coulomb stress change. Model results reveal that subduction earthquakes with slip vectors subparallel to the trench axis enhance the Coulomb stress on strike-slip faults adjacent to the trench but reduce the stress on faults farther back in the forearc region. In contrast, subduction events with slip vectors perpendicular to the trench axis enhance the Coulomb stress on strike-slip faults farther back in the forearc, while reducing the stress adjacent to the trench. A significant contribution to Coulomb stress increase on strike-slip faults in the back region of the forearc comes from "unclamping" of the fault, i.e., reduction in normal stress due to thrust motion on the subduction interface. We argue that although Coulomb stress changes from individual subduction earthquakes are ephemeral, their cumulative effects on the pattern of lithosphere deformation in the forearc region are significant. We use the Coulomb stress models to explain the contrasting deformation pattern between two adjacent segments of the Caribbean subduction zone. Subduction earthquakes with slip vectors nearly perpendicular to the Caribbean trench axis is dominant in the Hispaniola segment, where the strike-slip faults are more than 60 km inland from the trench. In contrast, subduction slip motion is nearly parallel to the Caribbean trench axis along the Puerto Rico segment, where the strike-slip fault is less than 15 km from the trench. This observed jump from a strike-slip fault close to the trench axis in the Puerto Rico segment to the inland faults in Hispaniola is explained by different distributions of Coulomb stress in the forearc region of the two segments, as a result of the change from the nearly trench parallel slip on the Puerto Rico subduction interface to the more perpendicular subduction slip beneath Hispaniola. The observations and modeling suggest that subduction-induced strike-slip seismic hazard to Puerto Rico may be smaller than previously assumed but the hazard to Hispaniola remains high. Copyright 2004 by the American Geophysical Union.

Seismic Evidence for Widespread Serpentinized Forearc Mantle Along the Mariana Convergence Margin

NASA Astrophysics Data System (ADS)

Tibi, R.; Wiens, D. A.

2007-12-01

We use P-to-S converted phases from teleseisms recorded at broadband stations in the Mariana Islands to image the forearc and arc regions of the Mariana convergence margin. The Moho in the subducting Pacific plate is observed at depths between 75 and 110 km beneath the region extending from Rota to Saipan. The S-wave velocity in the subducting crust is inferred to be ~10% slower than the surrounding mantle. This demonstrates that the crust has not yet undergone conversion to eclogite at these depths, in agreement with observations made for other arcs. A low velocity zone (LVZ), approximately 10--25 km thick, whose upper boundary is imaged at about 40--55 km depth, is detected in the forearc region of the mantle wedge along the entire margin. The anomaly is located too shallow to represent subducted oceanic crust. We interpret the LVZ as a serpentinized region in the forearc mantle, resulting from hydration by slab-expelled water. The occurrence of the serpentinized zone along the entire margin suggests that serpentinization of the forearc mantle is a widespread phenomenon in the Mariana arc. The inferred S wave velocity in the LVZ of as low as ~3.6 km/s represents a level of serpentinization of 30--50%, corresponding to a water content of about 4--6 wt%.

The Panama North Andes Plate Bounday Zone from Interpreted Radar Images, Geologic Mapping and Geophysical Anomalies

NASA Astrophysics Data System (ADS)

Hernandez, O.; Alexander, G. C.; Garzon, F.

2013-05-01

Satellite geodetics shows the existence of the rigid Panama microplate converging on west to east with The North Andean block. Seismic studies indicate that this plate boundary zone has compressive east-west stresses. Interpretation from magnetic and gravity data suggest that the thickness of the sedimentary sequence of The Atrato basin, reaches 10.5 km and that the Mande magmatic arc is a tectonic pillar, bounded by faults. The interpretation of seismic lines shows the basement of the Urabá Basin is affected by normal faults that limit blocks sunk and raised, a sedimentary sequence that is wedged against the Mande magmatic arc and becomes thicker towards the east. It also shows a thrust fault that connects Neogene sediments of Sinu fold belt with the Urabá Basin. The collision of the Panama arc with the Western Cordillera leads to the existence of a low-angle subduction zone inclined to the east involving the partition of the oceanic plate, drawing up of a trench and subducting plate bending. Before the Panama arc collision with the Western Cordillera, granitic intrusion had occurred that gave rise to the Mande magmatic arc, causing bending and rise of the oceanic crust. This effort generated tensional bending at the top of the crust that led to the formation of raised and sunken blocks bounded by normal faults, within which lies the tectonic pillar which forms the Mande magmatic arc. Upon the occurrence of the collision, it was launched the end of the connection between the Pacific Ocean and Caribbean Sea and the formation of the Uraba forearc basins and the Atrato basin. Panama - North Andes Plate boundary Zone 2d Modeling of the Panama - North Andes Plate Bounday Zone

Northwest Basin and Range tectonic deformation observed with the Global Positioning System, 1999-2003

USGS Publications Warehouse

Hammond, W.C.; Thatcher, W.

2005-01-01

We use geodetic velocities obtained with the Global Positioning System (GPS) to quantify tectonic deformation of the northwest Basin and Range province of the western United States. The results are based on GPS data collected in 1999 and 2003 across five new quasi-linear networks in northern Nevada, northeast California, and southeast Oregon. The velocities show ???3 mm/yr westward movement of northern Nevada with respect to stable North America. West of longitude 119??W the velocities increase and turn northwest, parallel to Sierra Nevada/Great Valley microplate motion, and similar to velocities previously obtained to the south. The observations are explained by a kinematic model with three domains that rotate around Euler poles in eastern Oregon and western Idaho. Northeast California experiences internal dextral shear deformation (11.2 ?? 3.6 nstrain/yr) subparallel to Pacific/North America motion. Relative motions of the domains imply 2-5 mm/yr approximately east-west extension in northwest Nevada and 1-4 mm/yr approximately north-south contraction near the California/Oregon border. The northward decreasing approximately east-west extension in northwest Nevada is consistent with the northern termination of Basin and Range deformation, faulting and characteristic topography. No significant extension is detected in the Oregon Basin and Range. The Oregon Cascade arc moves north at ???3.5 mm/yr and is possibly influenced by the approximately eastward motion of the Juan de Fuca plate. These results disagree with secular northwest trenchward motion of the Oregon forearc inferred from paleomagnetic rotations. South of latitude 43??, however, trenchward motion exists and is consistent with block rotations, approximately east-west Basin and Range extension, and northwest Sierra Nevada translation. Copyright 2005 by the American Geophysical Union.

Geological Development of the Izu-Bonin Forearc Since the Eocene Based on Biostratigraphic, Rock Magnetic, and Sediment Provenance Observations from IODP Expedition 352 Drill Cores

NASA Astrophysics Data System (ADS)

Petronotis, K. E.; Robertson, A.; Kutterolf, S.; Avery, A.; Baxter, A.; Schindlbeck, J. C.; Wang, K. L.; Acton, G.

2016-12-01

International Ocean Discovery Program (IODP) Expedition 352 recovered early Oligocene to recent sediments above Eocene igneous basement at 4 sites in the Izu-Bonin Forearc. The sites were selected to investigate the forearc region since subduction initiation in the Eocene, with Sites U1439 and U1442 being cored into the upper trench slope and Sites U1440 and U1441 into the lower trench slope. Postcruise studies of biostratigraphy, sediment chemistry, tephra composition and chronology and magnetic properties, along with observations from prior coring help constrain the regional geological development. Volcanic activity in the area, as inferred from its influence on sediment composition, has varied between long periods of activity and quiescence. Combined whole-rock sediment chemistry and tephra compositions suggest that during the Oligocene to earliest Miocene ( 30-22 Ma) tuffaceous input of predominantly dacitic composition was mainly derived from the intra-oceanic Izu-Bonin Arc. The early Miocene interval ( 22-15 Ma) lacks tuffaceous input, as supported by rock magnetic data. During this period, the forearc subsided beneath the carbonate compensation depth (CCD), as evidenced by radiolarian-bearing mud and metal-rich silty clay. This was followed by input of tephra with bimodal felsic and mafic compositions from the Izu-Bonin Arc from 15 to 5 Ma. Middle Miocene to Quaternary time was characterized by increased carbonate preservation, coupled with abundant, predominantly felsic tephra input, which is chemically indicative of a Japan continental arc source (Honshu), with additional chemically distinctive input from the Izu-Bonin Arc. Extending back to 32 Ma, tephra layers can be correlated between the upper-slope sites, extrapolated to the less well-dated lower-slope sites, and further correlated with onland Japanese tephra (Kutterolf et al., 2016; Goldschmidt Conference). Overall, the new results provide an improved understanding of the regional tectonic evolution.

The Talara Basin province of northwestern Peru: cretaceous-tertiary total petroleum system

USGS Publications Warehouse

Higley, Debra K.

2004-01-01

More than 1.68 billion barrels of oil (BBO) and 340 billion cubic feet of gas (BCFG) have been produced from the Cretaceous-Tertiary Total Petroleum System in the Talara Basin province, northwestern Peru. Oil and minor gas fields are concentrated in the onshore northern third of the province. Current production is primarily oil, but there is excellent potential for offshore gas resources, which is a mostly untapped resource because of the limited local market for gas and because there are few pipelines. Estimated mean recoverable resources from undiscovered fields in the basin are 1.71 billion barrels of oil (BBO), 4.79 trillion cubic feet of gas (TCFG), and 255 million barrels of natural gas liquids (NGL). Of this total resource, 15 percent has been allocated to onshore and 85 percent to offshore; volumes are 0.26 BBO and 0.72 TCFG onshore, and 1.45 BBO and 4.08 TCFG offshore. The mean estimate of numbers of undiscovered oil and gas fields is 83 and 27, respectively. Minimum size of fields that were used in this analysis is 1 million barrels of oil equivalent and (or) 6 BCFG. The Paleocene Talara forearc basin is superimposed on a larger, Mesozoic and pre-Mesozoic basin. Producing formations, ranging in age from Pennsylvanian to Oligocene, are mainly Upper Cretaceous through Oligocene sandstones of fluvial, deltaic, and nearshore to deep-marine depositional origins. The primary reservoirs and greatest potential for future development are Eocene sandstones that include turbidites of the Talara and Salinas Groups. Additional production and undiscovered resources exist within Upper Cretaceous, Paleocene, and Oligocene formations. Pennsylvanian Amotape quartzites may be productive where fractured. Trap types in this block-faulted basin are mainly structural or a combination of structure and stratigraphy. Primary reservoir seals are interbedded and overlying marine shales. Most fields produce from multiple reservoirs, and production is reported commingled. For this reason, and also because geochemical data on oils and source rocks is very limited, Tertiary and Cretaceous production is grouped into one total petroleum system. The most likely source rocks are Tertiary marine shales, but some of the Cretaceous marine shales are also probable source rocks, and these would represent separate total petroleum systems. Geochemical data on one oil sample from Pennsylvanian rock indicates that it was probably also sourced from Tertiary shales.

Modulation of Crustal Faulting in the Crescent Terrane by the Volume of Underthrust Accretionary Complex Along the Washington Cascadia Forearc

NASA Astrophysics Data System (ADS)

Brocher, T. M.

2017-12-01

Amphibious seismic experiments reveal widespread underthrusting of Cascadia accretionary rocks beneath basalts of the Crescent terrane, a large igneous province in the Washington forearc. Along margin variations in the volumes of the underthrust accretionary rocks appear to modulate the faulting within the overlying Crescent terrane, which hosts nearly all of the seismicity in the Washington forearc: the underlying accretionary rocks appear to deform aseismically. The underthrusting and underplating of large volumes of accretionary rocks on the Olympic Peninsula have uplifted and completely eroded a significant volume of the Crescent terrane, affecting the load-bearing strength of the forearc. I propose that as a consequence, the remnant Crescent terrane is actively deforming, as evidenced by the concentrated seismicity within it beneath Puget Lowland. This seismicity, focal mechanisms, fault geometries, and seismic tomography indicate that clockwise rotation and north-south compression of the forearc crust inferred from GPS data are accommodated by numerous thrust and strike slip faults in the remnant Crescent terrane. In addition to the spatial association between the erosion of the Crescent terrane on the Olympic Peninsula and the crustal faulting beneath Puget Lowland, support for the interpretation that the two are related also derives from the temporal coincidence between the mid to late Miocene uplift of the Crescent terrane on the peninsula and the mid-Miocene initiation of the thrust faulting in the lowland. In contrast, the underthrusting and underplating of lower volumes of accretionary rocks in the Washington forearc south of the Olympic Peninsula correlate with lower rates of crustal seismicity. These lower volumes of accretionary rocks have not caused the removal of a significant fraction of the Crescent terrane, resulting in a stronger, more structurally coherent Crescent terrane that deforms at lower rate than to the north.

Tectonic Reversal of the New Hebrides Forearc Recorded by Fossil Coral Terraces on Araki, Solomon Islands

NASA Astrophysics Data System (ADS)

Gallup, C. D.; Taylor, F. W.; Edwards, R. L.

2016-12-01

Araki is a small island in the New Hebrides forearc that exhibits a series of coral terraces. High precision 230Th ages of the corals and their elevations reveal a complicated tectonic history. Prior to the collision of the Bouganville Guyot on the subducting Australian plate with the forearc, the forearc was subsiding (Taylor et al., 2005). The highest elevation terrace on Araki has both last interglacial age (128 ka) corals and corals that grew between 103 and 107 ka present, when sea level was certainly lower than during the last interglacial period. However, the last interglacial corals occur in a cliff somewhat below the summit of Araki. We suggest this juxtaposition was produced by subsidence of the island during and after the last interglacial corals, potentially through the deposition of the 103 and 107 ka corals. At some point before or after their deposition, the island started to uplift, producing a series of terraces. Many of the corals on the lower terraces were deposited during periods of low sea level, between 33 and 62 ka. The lowest terrace is composed of Holocene corals. The mean uplift rate of Araki produced by using published sea level records for the corals deposited between 33 and 62 ka is approximately 2.4 mm/y. The uplift rate calculated based on the Holocene corals is much faster at approximately 4.7 mm/yr. A similar pattern of subsidence, to uplift, to faster uplift is found on Espiritu Santo and Malekula, encompassing 250 km of the forearc. The fossil corals thus record the changing tectonic conditions on the forearc associated with the subduction of the Bougainville Guyot. F.W. Taylor et al. (2005) TECTONICS, VOL. 24, TC6005, doi:10.1029/2004TC001650.

Source of marine turbidites on the Andaman-Nicobar Islands: Nicobar Fan, Bengal Fan or paleo-Irrawaddy?

NASA Astrophysics Data System (ADS)

Carter, A.

2017-12-01

Marine turbidites from an axially fed submarine fan are intermittently exposed across the entire chain of the Andaman-Nicobar Islands. Known as the Andaman Flysch (AF) and loosely assigned to the Paleogene, it has been proposed that these rocks are sourced from the Himalaya and thus provide a unique window into early stages of orogenesis. Where the turbidites came from has been subject to debate; they are either Bengal Fan or forearc deposits cut off from the Bengal Fan and possibly sourced from the Irrawaddy delta. Following recent IODP drilling in the eastern Indian Ocean (Expeditions 354 and 362) it is now possible resolve this by comparing the provenance of AF turbidites with the Bengal and Nicobar Fans. The Andaman Flysch can be traced as detached outcrops all along the western side of the main islands of Andaman over a strike length of more than 200 km. Exposures along the east coast are confined to South Andaman Island. Petrographic and geochemical data show a common continental crust signal with minor contributions from arc material. But, there are also differences whereby west coast sandstones show significantly higher quartz content and less feldspars and rock fragments. Staurolite is also present in all samples from the western side, but is absent from east coast samples. Both detrital zircon U-Pb and Bulk rock Nd data record the presence of arc material likely from Myanmar. Detrital zircon data from the Nicobar Fan match the Andaman turbidites and indicate sources from the Greater and Tethyan Himalaya mixed with sediment from the Burmese arc. Transfer of Irrawaddy derived sediment to the Nicobar Fan is ruled out as sediment transfer across the fore-arc to the west was restricted by the then exposed Yadana and M8 highs in the north and the Sewell and Alcock Rises to the south. Sediment isopachs of the Martaban back arc basin, the main north-south-oriented depocentre in the Andaman Sea related to the development of the Thanlwin -Irrawaddy delta system also show no significant transfer of sediment to the west. The provenance of the western Andaman Flysch matches the Nicobar Fan and is similar to the provenance of Neogene sands deposited in the eastern Bengal and Surma basins linked to the westward migration of the Indo-Burmese wedge that reduced accommodation and diverted sediments south to the shelf and Nicobar Fan.

Cryptic Carbonate Alteration in Orogenic Sedimentary Basins: Saving the Signal

NASA Astrophysics Data System (ADS)

Ingalls, M.; Rowley, D. B.; Colman, A. S.; Currie, B.; Snell, K. E.

2017-12-01

The clumped isotope thermometer (T(Δ47)) is arguably one of the most important tools introduced to the fields of paleoclimatology and tectonics in the past decade. However, we measure clumped isotope abundances in natural materials collected from sedimentary basins, many of which have experienced complex thermal and fluid interaction histories. Throughout the history of an authigenic mineral—from precipitation to exhumation—there are multiple opportunities to overprint isotopic signatures and obscure the essential fingerprint of primary environmental conditions. Therefore, we must critically assess the presence or absence of textural and isotopic alteration after original mineral formation. We investigate Paleocene shallow marine carbonates from the Xigaze forearc (S. Tibet) that yield demonstrably non-marine δ18Oc values (-12 to -21‰ VPDB), significant cm-scale variation in clumped isotope values (0.456 to 0.721‰, or 80 to 20°C), and have experienced temperatures >150°C for longer than 10 My based on ages of partial resetting of zircon He. δ18Oc values require complete oxygen isotopic exchange during fluid-buffered diagenesis, but display little visible evidence of recrystallization. Further, within the constraints of the Xigaze forearc time-temperature history, we explain the intrasample Δ47 variation by a combination of the two known mechanisms of Δ47 alteration: (1) water-rock recrystallization and (2) solid-state reordering. The definitively altered marine carbonates pass the same optical screening tests for secondary mineralization traditionally used when employing δ18Oc or Δ47 as proxies for ancient Earth conditions, suggesting that alteration occurred on a spatial scale irresolvable by standard techniques. Therefore, higher spatial resolution detection of carbonate alteration is required to prevent incorrect or incomplete interpretation of carbonate isotopic values. We employ a suite of isotopic (δ18O, δ13C, Δ47, U/Pb), geochemical (EBSD), and optical (cathodoluminescence) techniques to identify evidence and episodes of micro-recrystallization. Our ability to screen for cryptic alteration and place isotopic alteration events within the constraints of a rock's diagenetic history is critical for the future use of the carbonate proxy record in geological applications.

Structure and Deformation of the Hikurangi-Kermadec Subduction Zone - Transitions Revealed by Seismic Wide-angle Data

NASA Astrophysics Data System (ADS)

Scherwath, M.; Kopp, H.; Flueh, E. R.; Henrys, S. A.; Sutherland, R.

2008-12-01

The Hikurangi-Kermadec subduction zone northeast of New Zealand represents an ideal target to study lateral variations of subduction zone processes. The incoming Pacific plate changes from being a large igneous province, called the Hikurangi Plateau, in the south to normal oceanic plate north of the Rapuhia Scarp. The overriding Australian plate of continental character in the south, forming the North Island of New Zealand, and changes to an island arc in the north. Further lateral variability exists in changes in volcanic and hydro-thermal activity, transitions from accretion to subduction erosion, backarc spreading and rifting, and is accompanied by northward increasing seismicity. As part of the MANGO project (Marine Geoscientific Investigations on the Input and Output of the Kermadec Subduction Zone), four marine geophysical transects of largely seismic reflection and refraction data provide constraints on the upper lithospheric structures across the Hikurangi-Kermadec Trench between 29-38 deg S. On MANGO profile 1 in the south, the initially shallow subduction of the incoming plateau coincides with crustal underplating beneath the East Cape ridge. To the west lies the 100 km wide and over 10 km deep Raukumara Basin. Seismic velocities of the upper mantle of both plates are around 8 km/s and are considered normal. In contrast, on MANGO profile 4, about 1000 km to the north around the volcanically active Raoul Island, the incoming oceanic crust appears to bend considerably steeper and thus causes a 50 km narrower forearc with a smaller forearc basin. Furthermore, the upper mantle velocities in both plates are relatively low (7.4-7.7 km/s), likely indicating strong bending related deformation of the incoming plate and thermal activity within the arc possibly due to spreading. The central two transects MANGO 2 and 3, though without data coverage of the structure of the incoming plate, are more similar to MANGO 4. The arc regions appear to be strongly affected by the activity of the arc. The arc crust of the northern MANGO 3 becomes significantly thinner in the backarc region due to extension, whereas the data from MANGO 2 likely show thermal activity from the adjacent arc volcanism.

The Late Paleozoic magmatic evolution of the Aqishan-Yamansu belt, Eastern Tianshan: Constraints from geochronology, geochemistry and Sr-Nd-Pb-Hf isotopes of igneous rocks

NASA Astrophysics Data System (ADS)

Zhao, Liandang; Chen, Huayong; Zhang, Li; Zhang, Weifeng; Yang, Juntao; Yan, Xuelu

2018-03-01

The Aqishan-Yamansu belt in the Eastern Tianshan (Xinjiang, NW China) is an important mineralization belt. The belt mainly comprises Carboniferous volcanic, volcaniclastic and clastic rocks, and hosts many intermediate-felsic intrusions and Fe (-Cu) deposits. The biotite diorite, felsic brecciated tuff, granodiorite and syenite from the western Aqishan-Yamansu belt are newly zircon U-Pb dated to be 316.7 ± 1.4 Ma, 315.6 ± 2.6 Ma, 305.8 ± 1.9 Ma and 252.5 ± 1.4 Ma, respectively. The mafic rocks (mafic brecciated tuff and diabase porphyry) are tholeiitic to calc-alkaline series, LILE-rich (e.g., Rb, Ba and Pb), HFSE-depleted (e.g., Nb and Ta), and have high Mg#(44-60), Nb/Ta (15.0-20.0), Ba/La (>30) and Ba/Nb (>57) values/ratios, and low Th/Yb ratios (<1), probably originating from mantle wedge metasomatized by slab-derived fluids. The intermediate-felsic igneous rocks are LILE-rich, HFSE-depleted, with high Sr and Y contents showing typical of normal arc magma affinity. Moreover, the depleted εHf(t) (>2.10) and positive εNd(t) (>5.7), combined with variable Nb/Ta ratios (9.52-21.4), Y/Nb ratios (1.47-39.7) and Pb isotopes (206Pb/204Pb = 16.225-17.640, 207Pb/204Pb = 15.454-15.520, 208Pb/204Pb = 37.097-38.025) suggest that these rocks were magma mixing products between juvenile crustal-derived magmas and minor mantle-derived magmas. Combined published works with our new ages, geochemical and isotopic data, we propose that the Aqishan-Yamansu belt was an Early Carboniferous fore-arc basin during the southward subduction of the Kangguer oceanic slab beneath the Yili-Central Tianshan block. With the continuing southward subduction, the Aqishan-Yamansu fore-arc basin initiated to close, which generated the mafic and intensive intermediate-felsic magmatism associated with regional Fe (-Cu) mineralization.

Erosion and deposition by supercritical density flows during channel avulsion and backfilling: Field examples from coarse-grained deepwater channel-levée complexes (Sandino Forearc Basin, southern Central America)

NASA Astrophysics Data System (ADS)

Lang, Jörg; Brandes, Christian; Winsemann, Jutta

2017-03-01

Erosion and deposition by supercritical density flows can strongly impact the facies distribution and architecture of submarine fans. Field examples from coarse-grained channel-levée complexes from the Sandino Forearc Basin (southern Central America) show that cyclic-step and antidune deposits represent common sedimentary facies of these depositional systems and relate to the different stages of avulsion, bypass, levée construction and channel backfilling. During channel avulsion, large-scale scour-fill complexes (18 to 29 m deep, 18 to 25 m wide, 60 to > 120 m long) were incised by supercritical density flows. The multi-storey infill of the large-scale scour-fill complexes comprises amalgamated massive, normally coarse-tail graded or widely spaced subhorizontally stratified conglomerates and pebbly sandstones, interpreted as deposits of the hydraulic-jump zone of cyclic steps. The large-scale scour-fill complexes can be distinguished from small-scale channel fills based on the preservation of a steep upper margin and a coarse-grained infill comprising mainly amalgamated hydraulic-jump zone deposits. Channel fills include repeated successions deposited by cyclic steps with superimposed antidunes. The deposits of the hydraulic-jump zone of cyclic steps comprise regularly spaced scours (0.2 to 2.6 m deep, 0.8 to 23 m long) infilled by intraclast-rich conglomerates or pebbly sandstones, displaying normal coarse-tail grading or backsets. These deposits are laterally and vertically associated with subhorizontally stratified, low-angle cross-stratified or sinusoidally stratified sandstones and pebbly sandstones, which were deposited by antidunes on the stoss side of the cyclic steps during flow re-acceleration. The field examples indicate that so-called spaced stratified deposits may commonly represent antidune deposits with varying stratification styles controlled by the aggradation rate, grain-size distribution and amalgamation. The deposits of small-scale cyclic steps with superimposed antidunes form fining-upwards successions with decreasing antidune wavelengths, indicating waning flows. Such cyclic step-antidune successions form the characteristic basal infill of mid-fan channels, and are inferred to be related to successive supercritical high-density turbidity flows triggered by retrogressive slope failures.

Active Deformation in the Overriding Plate Associated with Temporal Changes of the Philippine Sea Plate Motion

NASA Astrophysics Data System (ADS)

Ishiyama, T.; Sato, H.; Van Horne, A.

2015-12-01

We present detailed geologic evidence linking changes over time in Philippine Sea plate (PHS) motion and intracontinental deformation in central and southwest (SW) Japan during the Pliocene and after. In the early Pliocene, subduction of the PHS plate under SW Japan restarted in a northerly direction after period of deceleration or cessation. Later, motion changed to a more westerly direction. Corresponding geological changes found in the overriding plate include unconformities in the forearc basins, changes in slip sense on faults, depocenter migration, re-organization of drainage systems and volcanism. Quaternary intraplate deformation is prominent north of the Median Tectonic Line (MTL) inactive segment, above a shallow flat slab. In contrast, less Quaternary tectonic activity is found north of the MTL active segment which lies over a steadily-slipping portion of the subducting slab that behaves as a less-deformed rigid block. Depocenters and active thrusting have migrated north/northwestward over the past 5 My above the shallow flat slab segment of the PHS. We reconstructed the Plio-Pleistocene migration history using Neogene stratigraphy and shallow seismic reflection profiles. We see shallow PHS slab contact with the lower continental crust in our deep seismic reflection profiles, which may explain its enhanced downward drag of the overriding plate and synchronous strong compression in the crust. We find evidence of more westerly PHS plate subduction since the middle Pleistocene in (1) unconformities in the Kumano forearc basin deposits in SW Japan, (2) drastic stream captures in Shikoku, and (3) concordant changes in fault slip sense from thrust to dextral slip along the MTL. Oblique subduction could have induced stronger horizontal stress in the overriding plate above the shallow flat slab which could account for the increasing geologic slip rate observed on active structures. During four repetitions of megathrust earthquake sequences since the 17th century, ca. 65 % of all intraplate M>6.5 earthquakes have been concentrated in the area above the PHS flat slab. This also suggests that mechanical interaction between the slab and the overriding plate plays an important role in intraplate seismicity over shorter timescales as well.

Forearc uplift in northern Chile: New paleoaltimetric methods, constraints, and numerical experiments on the role of subduction channel flow

NASA Astrophysics Data System (ADS)

Cosentino, Nicolas Juan

The lithosphere-scale geodynamic mechanisms that control forearc topography are still contentious. In northern Chile, this is in part due to a lack of paleoelevation constraints. In order to rectify this lack of data, this thesis carries out a series of studies. First, a new paleoaltimetry proxy for the hyperarid Atacama Desert was developed, based on the elevation-dependent relationship of the 87Sr/86Sr ratio of Holocene surface accumulations of salts. Here, an important source of calcium sulfate comes from stratocumulus clouds that generate fog on the continent, transferring water droplets to the ground surface which, upon evaporation, precipitate calcium sulfate. The seawater ratio of 87Sr/86Sr (0.70917) is distinctly higher than that of weathered mean Andean rock (<0.70750). Sites below 1075 m.a.s.l. and above 225 m.a.s.l. display Holocene calcium sulfate 87Sr/86Sr of mean value 0.70807 ± 0.00004, while the ratio outside this altitudinal domain is 0.70746 ± 0.00010. Based on these results for Holocene materials, Pliocene-Pleistocene paleoelevations of the forearc surface were inferred. We measured 87Sr/86Sr of dated ancient gypsic soils and applied appropriate corrections to the paleo-fog zone top and bottom. The results show that the magnitudes of paleo-elevation changes are small compared to the elevation of the study area: more than 45% of the 1000 m.a.s.l. average elevation of the Central Depression and more than 70% of the 900 m.a.s.l. average elevation of the westernmost Coastal Cordillera were achieved by pre-early Pliocene regional scale tectonic processes. Finally, the response of the forearc surface to 2D viscoelastic flow in a subduction channel was characterized numerically. 800-1100-m-thick subduction channels with viscosities of 5-10 x1018 Pa s best fit the elevations of the Central Depression after steady-state topography is reached in less than 6 myr. The onset of hyperaridity at 25 Ma starved the trench and subduction channel of sediments, raising shear stresses at the plate interface and uplifting the forearc. Short-lived phases of less aridity may have affected forearc topography transiently. The models predict that in order to accord with available Central Depression paleoelevation constraints, these phases translated to pulses of “weaker” subduction channels with viscosities between 2-7 x1018 Pa s.

Seismic evidence for widespread serpentinized forearc upper mantle along the Cascadia margin

USGS Publications Warehouse

Brocher, T.M.; Parsons, T.; Trehu, A.M.; Snelson, C.M.; Fisher, M.A.

2003-01-01

Petrologic models suggest that dehydration and metamorphism of subducting slabs release water that serpentinizes the overlying forearc mantle. To test these models, we use the results of controlled-source seismic surveys and earthquake tomography to map the upper mantle along the Cascadia margin forearc. We find anomalously low upper-mantle velocities and/or weak wide-angle reflections from the top of the upper mantle in a narrow region along the margin, compatible with recent teleseismic studies and indicative of a serpentinized upper mantle. The existence of a hydrated forearc upper-mantle wedge in Cascadia has important geological and geophysical implications. For example, shearing within the upper mantle, inferred from seismic reflectivity and consistent with its serpentinite rheology, may occur during aseismic slow slip events on the megathrust. In addition, progressive dehydration of the hydrated mantle wedge south of the Mendocino triple junction may enhance the effects of a slap gap during the evolution of the California margin.

Tracing halogen and B cycling in subduction zones based on obducted, subducted and forearc serpentinites of the Dominican Republic.

PubMed

Pagé, Lilianne; Hattori, Keiko

2017-12-19

Serpentinites are important reservoirs of fluid-mobile elements in subduction zones, contributing to volatiles in arc magmas and their transport into the Earth's mantle. This paper reports halogen (F, Cl, Br, I) and B abundances of serpentinites from the Dominican Republic, including obducted and subducted abyssal serpentinites and forearc mantle serpentinites. Abyssal serpentinite compositions indicate the incorporation of these elements from seawater and sediments during serpentinization on the seafloor and at slab bending. During their subduction and subsequent lizardite-antigorite transition, F and B are retained in serpentinites, whilst Cl, Br and I are expelled. Forearc mantle serpentinite compositions suggest their hydration by fluids released from subducting altered oceanic crust and abyssal serpentinites, with only minor sediment contribution. This finding is consistent with the minimal subduction of sediments in the Dominican Republic. Forearc mantle serpentinites have F/Cl and B/Cl ratios similar to arc magmas, suggesting the importance of serpentinite dehydration in the generation of arc magmatism in the mantle wedge.

Active simultaneous uplift and margin-normal extension in a forearc high, Crete, Greece

NASA Astrophysics Data System (ADS)

Gallen, S. F.; Wegmann, K. W.; Bohnenstiehl, D. R.; Pazzaglia, F. J.; Brandon, M. T.; Fassoulas, C.

2014-07-01

The island of Crete occupies a forearc high in the central Hellenic subduction zone and is characterized by sustained exhumation, surface uplift and extension. The processes governing orogenesis and topographic development here remain poorly understood. Dramatic topographic relief (2-6 km) astride the southern coastline of Crete is associated with large margin-parallel faults responsible for deep bathymetric depressions known as the Hellenic troughs. These structures have been interpreted as both active and inactive with either contractional, strike-slip, or extensional movement histories. Distinguishing between these different structural styles and kinematic histories here allows us to explore more general models for improving our global understanding of the tectonic and geodynamic processes of syn-convergent extension. We present new observations from the south-central coastline of Crete that clarifies the role of these faults in the late Cenozoic evolution of the central Hellenic margin and the processes controlling Quaternary surface uplift. Pleistocene marine terraces are used in conjunction with optically stimulated luminesce dating and correlation to the Quaternary eustatic curve to document coastal uplift and identify active faults. Two south-dipping normal faults are observed, which extend offshore, offset these marine terrace deposits and indicate active N-S (margin-normal) extension. Further, marine terraces preserved in the footwall and hanging wall of both faults demonstrate that regional net uplift of Crete is occurring despite active extension. Field mapping and geometric reconstructions of an active onshore normal fault reveal that the subaqueous range-front fault of south-central Crete is synthetic to the south-dipping normal faults on shore. These findings are inconsistent with models of active horizontal shortening in the upper crust of the Hellenic forearc. Rather, they are consistent with topographic growth of the forearc in a viscous orogenic wedge, where crustal thickening and uplift are a result of basal underplating of material that is accompanied by extension in the upper portions of the wedge. Within this framework a new conceptual model is presented for the late Cenozoic vertical tectonics of the Hellenic forearc.

Crustal Accretion at Subduction Initiation Along Izu-Bonin-Mariana Arc and the Link to SSZ Ophiolites

NASA Astrophysics Data System (ADS)

Ishizuka, O.; Tani, K.; Reagan, M. K.; Kanayama, K.; Umino, S.; Harigane, Y.; Sakamoto, I.

2014-12-01

The Izu-Bonin-Mariana (IBM) forearc preserves the earliest arc magmatic history from subduction initiation to the establishment of the arc. Recent investigations have established a bottom to top igneous stratigraphy of: 1) mantle peridotite, 2) gabbroic rocks, 3) a sheeted dyke complex, 4) basaltic pillow lavas (forearc basalts: FAB), 5) boninites and magnesian andesites, 6) tholeiites and calcalkaline arc lavas. This stratigraphy has many similarities to supra-subduction zone (SSZ) ophiolites. One of the most important common characteristics between the SSZ ophiolites and the forearc crust is the occurrence of MORB-like basaltic lavas underlying or accompanying boninites and early arc volcanic suites. A key observation from the IBM forearc is that FAB differs from nearby back-arc lavas in chemical characteristics, including a depletion in moderately incompatible elements. This indicates that FAB is not a pre-existing oceanic basement of the arc, but the first magmatic product after subduction initiation. Sheeted dikes of FAB composition imply that this magmatism was associated with seafloor spreading, possibly triggered by onset of slab sinking. Recognition of lavas with transitional geochemical characteristics between the FAB and the boninites strongly implies genetic linkage between these two magma types. The close similarity of the igneous stratigraphy of SSZ ophiolites to the IBM forearc section strongly implies a common magmatic evolutionary path, i.e., decompressional melting of a depleted MORB-type mantle is followed by melting of an even more depleted mantle with the addition of slab-derived fluid/melt to produce boninite magma. Similarity of magmatic process between IBM forearc and Tethyan ophiolites appears to be reflected on common characteristics of upper mantle section. Peridotite from both sections show more depleted characteristics compared to upper mantle rocks from mid-ocean ridges. Age determinations reveal that first magmatism at the IBM arc occurred at c. 52 Ma, and transition from forearc basalt to normal arc magmatism took 7-8 million years. Combined with the age information from SSZ-ophiolites, significant constraints on time scale of subduction initiation and associated crustal accretion might be obtained.

Diachronous demise of the Neotethys Ocean as driver for non-cylindrical orogenesis in Anatolia

NASA Astrophysics Data System (ADS)

Van Hinsbergen, D. J. J.; Gurer, D.

2017-12-01

Continent-continent collision drives crustal deformation, topographic rise, and geodynamic change. Africa-Eurasia convergence accommodated in the Eastern Mediterranean involved subduction of the Neotethyan oceanic lithosphere in Anatolia. Subduction was followed by collision of Greater Adria continental crust with Eurasia forming the Izmir-Ankara-Erzincan suture zone. Discerning the effects of this collision from pre-collisional ophiolite obduction-related orogeny of Greater Adria is notoriously difficult, and estimates from Central Anatolia based on a forearc-to-foreland basin transition along the Eurasian margin suggest a 60 Ma initial collision. Here we assess whether this age is also representative for collision in eastern Anatolia across the Cenozoic Sivas basin that straddles the Greater Adria-Europe suture by retro-deforming regional block rotations in the Pontides, Kırşehir and Taurides, building a first-order regional `block circuit' around the Sivas basin. We show that up to 700 km of convergence must have been accommodated after central Anatolian Kırşehir-Pontide collision at 65-60 Ma across the Sivas Basin - an order of magnitude more than estimated crustal shortening. We consequently infer that oceanic subduction continued much longer in eastern Anatolia, perhaps into the Oligocene or beyond, demonstrating the a recently postulated greater paleogeographic width of the Neotethys in eastern Anatolia. Prolonged oceanic subduction likely resulted from a paleogeography with a sharp kink in the former Kırşehir-Tauride passive margin. The strong non-cylindricity of the Anatolian collisional orogen is explained continued slab pull during ongoing oceanic subduction in eastern Anatolia following central Anatolian collision.

Controls on the fore-arc CO2 flux along the Central America margin

NASA Astrophysics Data System (ADS)

Hilton, D. R.; Barry, P. H.; Ramirez, C. J.; Kulongoski, J. T.; Patel, B. S.; Virrueta, C.; Blackmon, K.

2015-12-01

The subduction of carbon to the deep mantle via subduction zones is interrupted by outputs via the fore-arc, volcanic front, and back-arc regions. Whereas output fluxes for arc and back-arc locales are well constrained for the Central America Volcanic Arc (CAVA) [1-2], the fore-arc flux via cold seeps and ground waters is poorly known. We present new He and CO2 data (isotopes and relative abundances) for the volcanic front and inner fore-arc of western Panama to complement on-going studies of fore-arc C-fluxes in Costa Rica [3-4] and to determine tectonic controls on the fore-arc C-outgassing fluxes. Helium isotope (3He/4He) values at Baru, La Yeguada, and El Valle volcanoes are high (5-8RA), consistent with results for other Central America volcanoes. However, CO2/3He values are variable (from > 1012 to < 108). Baru has an arc-like δ13C of - 4‰, whereas the other volcanoes have δ13C < -10 ‰. Cold seeps collected in the coastal fore-arc of Panama show a trend of decreasing He-isotopes from west (~6RA) to east (~1RA). This trend is mirrored by δ13C (-5‰ to <-20‰) values. CO2/3He values of the seeps are also variable and fall between 106 and 1012. Using CO2/3He-δ13C mixing plots with conventional endmember values for Limestone, Organic Sediment and Mantle CO2, we show that several Panama samples have been extensively modified by crustal processes. Nevertheless, there are clear west-to east trends (both volcanoes and coastal seeps), whereby L dominates the CO2 inventory in the west, similar to Costa Rica, and S-derived CO2 increases eastward towards central Panama. Previously [4], we limited the Costa Rica subaerial fore-arc flux to ~ 6 × 107 gCkm-1yr-1, or ~ 4% of the total incoming sedimentary C-load. This flux diminishes to zero within ~400 km to the east of Baru volcano. The transition from orthogonal subduction of the Cocos Plate to oblique subduction of the Nazca Plate, relative to the common over-riding Caribbean Plate, is the major impediment to slab degassing towards the southern terminus of the CAVA. [1] Shaw et al., 2003, EPSL; [2] De Leeuw et al., 2007, EPSL; [3] Furi et al, 2010, G-cubed; [4] Hilton et al. 2014, Fall AGU.

Searching for conditions of observation of subduction seismogenic zone transients on Ocean Bottom Seismometers deployed at the Lesser Antilles submerged fore-arc

NASA Astrophysics Data System (ADS)

Bécel, Anne; Laigle, Mireille; Diaz, Jordi; Hirn, Alfred; Flueh, Ernst; Charvis, Philippe

2010-05-01

In the frame of the European Union « THALES WAS RIGHT » and French ANR CATTELL SUBSISMANTI funding, an unprecedented array of 80 OBS, Ocean Bottom Seismometers of Géoazur Nice, INSU/IPGP Paris, IfM-GEOMAR Kiel, AWI Bremerhaven could gathered. They have been deployed for continuous recording over four months on the fore-arc domain of the Lesser Antilles subduction zone offshore Martinique, Dominica, Guadeloupe and Antigua Islands, by scientific cruises of N/O ATALANTE, F/S M. A. MERIAN and N/O ANTEA. One of the aims of this OBS array was the feasibility study of detecting at sea-bottom the seismological part of recently discovered phenomena such as NVT non-volcanic tremors and LP, for Long-Period events. The ability of detecting such transient signals is of importance, since they are possibly related to potential mega-thrust earthquakes and their preparation zone. At the Lesser Antilles subduction zone, the fore-arc domain overlying the seismogenic part of the interplate is located offshore, covered by as much as 4000 m of water. In this case, transient signals can be accessible only from OBS observations. Hence, there is a major difference, in the sense of the instrumental and logistical effort, with the subductions under NW US-Canada and under Central Japan where these signals have been discovered. There, the subduction zones have an emerged fore-arc that has allowed the chance discovery of those phenomena by regular instrument maintained routinely on land. Over 20 of the instruments were BB-OBS, with broadband seismic sensors, possibly the largest such gathering at the time of the experiment among the OBS types. Among those broadband OBS designed or used by different Institutions, there were at least three different seismometer brands and acoustical sensors, as well as different mechanical mounting and technical solutions for coupling them to ground. This did not facilitate data recovery and processing, but on the other hand, as planned by interweaving the different instruments deployments, it provided diverse views, as through different glasses. This ultimately proved valuable to help extract the harder facts from their diverse appearances when seen through different instruments and in different types of sites. After analyzing the data for spurious and instrument-related peculiarities, and possible interpretation pitfalls, it remains that the noise level shows an overwhelming influence of the marine domain due to both its own sources, hydrosphere motions, and to meteorological-climatological actions. As well, the response of the laterally variable fore-arc basin on top of which measurements have to be made is much adverse to quality recording, with respect to seismological observatories on land which can be buried deep into basement rocks. The study of this noise itself may allow us to initiate a discussion of the interactions of the oceanic and atmospheric processes with the Solid Earth. Transients at depth in the subduction zone have been tentatively discussed in terms of its seismogenic evolution. If such transient events would indeed have a component over a very broad spectral range from NVT to LP and ULP events as it has been suggested very recently in Japan (Ide et al., 2008), the conditions and the best observation windows in which they can be best searched for are now documented for ocean bottom recording in the case of the Lesser Antilles subduction zone.

Impact of great subduction earthquakes on the long-term forearc morphology, insight from mechanical modelling

NASA Astrophysics Data System (ADS)

Cubas, Nadaya

2017-04-01

The surge of great subduction earthquakes during the last fifteen years provided numerous observations requiring revisiting our understanding of large seismic events mechanics. For instance, we now have clear evidence that a significant part of the upper plate deformation is permanently acquired. The link between great earthquakes and long-term deformation offers a new perspective for the relief construction understanding. In addition, a better understanding of these relations could provide us with new constraints on earthquake mechanics. It is also of fundamental importance for seismic risk assessment. In this presentation, I will compile recent results obtained from mechanical modelling linking megathrust ruptures with upper-plate permanent deformation and discuss their impact. We will first show that, in good accordance with lab experiments, aseismic zones are characterized by frictions larger or equal to 0.1 whereas seismic asperities have dynamic frictions lower than 0.05. This difference will control the long-term upper-plate morphology. The larger values along aseismic zones allow the wedge to reach the critical state, and will lead to active thrust systems forming a relief. On the contrary, low dynamic friction along seismic asperities will place the taper in the sub-critical domain impeding any internal deformation. This will lead to the formation of forearc basins inducing negative gravity anomalies. Since aseismic zones have higher friction and larger taper, fully creeping segments will tend to develop peninsulas. On the contrary, fully locked segments with low dynamic friction and very low taper will favor subsiding coasts. The taper variation due to megathrust friction is also expressed through a correlation between coast-to-trench distance and forearc coupling (e.g., Mexican and South-American subduction zones). We will then discuss how variations of frictional properties along the megathrust can induce splay fault activation. For instance, we can reactivate normal faults at the down-dip limit of the seismogenic zone or at an increasing slip transition (e.g., Chile and Japan). Finally, we will show that the fault vergence is controlled by the frictional properties. Sudden and successive decreases of the megathrust effective friction during frontal propagation of earthquakes will lead to the formation of landward-vergent frontal thrusts in the accretionary prism. Therefore, a particular attention needs to be paid to accretionary prisms with normal faults implying large up-dip ruptures (e.g., Alaska and Japan) or with frontal landward-vergent thrust faults, markers of past seafloor coseismic ruptures leading to very large tsunamis (e.g., Cascadia and Sumatra). If the forearc long-term deformation seems in good accordance with our understanding of earthquake mechanics, recent studies have pointed to a major discrepancy between short- and long-term deformation at the coast (i.e., the Central Andes subduction zone). An analogue discrepancy has been pointed out for the Himalaya after the 2015 Mw 7.8 Gorkha earthquake. Melnick (2016) proposed that the coastal long-term deformation could be related to deep and less frequent earthquakes instead of standard subduction events. It is now of fundamental importance to understand the link between the coastal long-term record and the short-term deformation for seismic risk assessment and relief building processes understanding. It will probably constitute the next challenge for mechanical modelling.

Vertical forearc tectonic displacements offer insights into underlying interplate thrust zone processes: 104-105 yr uplift/subsidence cycles in Southwest Pacific arcs may represent recoverable plastic deformation that is often falsely attributed to other causes

NASA Astrophysics Data System (ADS)

Taylor, F. W.; Lavier, L. L.; Frohlich, C.; Thirumalai, K.; Papabatu, A. K.

2015-12-01

In the forearcs of subduction zones, the characteristics of both short-term (temporary earthquake cycle) and longer-term permanent vertical deformation offer insights into processes by which plates subduct. But permanent vertical deformation may be a product of several simultaneous processes, including tectonic erosion/underplating, changing dip of the slab, upward displacement due to buoyancy or bathymetric features, and plastic shortening/extension of the forearc wedge. Here we note the rarely recognized, but possibly common, phenomenon of intermediate time scale transient vertical movements (TVM's). Both the central New Hebrides and Western Solomon forearcs have uplifted ≥500 m over time scales of 105 yr. Uplift started abruptly (over ≤10 ky) and proceeded at localized rates up to 7-8 mm/yr. Both initial uplifts terminated preceding rapid subsidence of similar dimensions and rates that, in turn, had followed yet older uplift. However, these uplifts and subsidences are superimposed on a yet longer-term trend of uplift on time scales >105 yr. The most recent uplifts extended 100-200 km along-arc and 60-90 km cross-arc while plate convergence was <10 km. These 105 yr vertical oscillations are most likely due to plastic shortening/extension driven by strong horizontal forces related to rugged seafloor bathymetry impinging on the outer forearc. Subsidence follows uplift when horizontal force abates temporarily and uplift is no longer supported by enhanced interplate coupling. Over the 105 yr time frame when interplate slip is <10 km, it is difficult to account for the timing, geography, and amounts of up and down motion by processes such as buoyancy or volumetric displacement of downgoing bathymetric features or by tectonic underplating/erosion. Instead, ~1% of shortening within the upper plate is sufficient to account for up to several hundred m of uplift across a large area of the forearc.

Fluid and mass transfer into the cold mantle wedge of subduction zones: budgets and seismic constraints

NASA Astrophysics Data System (ADS)

Abers, G. A.; Hacker, B. R.; Van Keken, P. E.; Nakajima, J.; Kita, S.

2015-12-01

Dehydration of subducting plates should hydrate the shallow overlying mantle wedge where mantle is cold. In the shallow mantle wedge hydrous phases, notably serpentines, chlorite, brucite and talc should be stable to form a significant reservoir for H2O. Beneath this cold nose thermal models suggest only limited slab dehydration occurs at depths less than ca. 80 km except in warm subduction zones, but fluids may flow updip from deeper within the subducting plate to hydrate the shallow mantle. We estimate the total water storage capacity in cold noses, at temperatures where hydrous phases are stable, to be roughly 2-3% the mass of the global ocean. At modern subduction flux rates its full hydration could be achieved in 50-100 Ma if all subducting water devolatilized in the upper 100 km flows into the wedge; these estimates have at least a factor of two uncertainty. To investigate the extent to which wedge hydration actually occurs we compile and generate seismic images of forearc mantle regions. The compilation includes P- and S-velocity images with good sampling below the Moho and above the downgoing slab in forearcs, from active-source imaging, local earthquake tomography and receiver functions, while avoiding areas of complex tectonics. Well-resolved images exist for Cascadia, Alaska, the Andes, Central America, North Island New Zealand, and Japan. We compare the observed velocities to those predicted from thermal-petrologic models. Among these forearcs, Cascadia stands out as having upper-mantle seismic velocities lower than overriding crust, consistent with high (>50%) hydration. Most other forearcs show Vp close to 8.0 km/s and Vp/Vs of 1.73-1.80. We compare these observations to velocities predicted from thermal-mineralogical models. Velocities are slightly slower than expected for dry peridotite and allow 10-20% hydration, but also could also be explained as relict accreted rock, or delaminated, relaminated, or offscraped crustal material mixed with mantle. The absence of wholesale hydration of forearcs globally can be taken as evidence that most forearcs are too young to be substantially hydrated, that most subducted water bypasses the forearc and is released deeper, or that most fluid passing through the mantle nose does not react with the mantle.

Thallium as a tracer of fluid-rock interaction in the shallow Mariana forearc

NASA Astrophysics Data System (ADS)

Nielsen, Sune G.; Klein, Frieder; Kading, Tristan; Blusztajn, Jerzy; Wickham, Katie

2015-11-01

Fluids driven off the subducting Pacific plate infiltrate the shallow Mariana forearc and lead to extensive serpentinization of mantle peridotite. However, the sources, pathways, and chemical modifications of ascending, slab-derived fluids remain poorly constrained and controversial. In this study, we use thallium (Tl) concentrations and isotopic ratios of serpentinized peridotite and rodingitized diabase from the South Chamorro and Conical Seamounts to discriminate between potential fluid sources with distinct Tl isotope compositions. Serpentinite samples from the Mariana forearc all display ε205 Tl > - 0.5 (where ε205 Tl = 10 , 000 × (205Tl /Tl203sample -205Tl /SRM 997 203Tl ) / (205Tl / SRM 997 203Tl )), which is significantly enriched in 205Tl compared to the normal mantle (ε205 Tl = - 2). Given that high temperature hydrothermal processes do not impart significant Tl isotope fractionation, the isotope compositions of the serpentinites must reflect that of the serpentinizing fluid. Pelagic sediments are the only known slab component that consistently displays ε205 Tl > - 0.5 and, therefore, we interpret the heavy Tl isotope signatures as signifying that the serpentinizing fluids were derived from subducting pelagic sediments. A rodingitized diabase from Conical Seamount was found to have an ε205 Tl of 0.8, suggesting that sediment-sourced serpentinization fluids could also affect diabase and other mafic lithologies in the shallow Mariana forearc. Forearc rodingitization of diabase led to a strong depletion in Tl content and a virtually complete loss of K, Na and Rb. The chemical composition of hybrid fluids resulting from serpentinization of harzburgite with concomitant rodingitization of diabase can be highly alkaline, depleted in Si, yet enriched in Ca, Na, K, and Rb, which is consistent with the composition of fluids emanating from mud volcanoes in the Mariana forearc. Our study suggests that fluid-rock interactions between sedimentary, mafic, and ultramafic lithologies are strongly interconnected even in the shallowest parts of subduction zones. We conclude that transfer of fluids and dissolved elements at temperatures and pressures below 400 °C and 1 GPa, respectively, must be taken into account when elemental budgets and mass transfer between the subducting plate, the forearc, the deep mantle and the ocean are evaluated.

Structure and Neotectonics of the Southern Chile Forearc 35°S - 40°S

NASA Astrophysics Data System (ADS)

Geersen, Jacob; Völker, David; Weinrebe, Wilhelm; Krastel-Gudegast, Sebastian; Behrmann, Jan H.

2010-05-01

The Southern Chile Forearc exhibits an extreme level of neotectonic deformation. On-land studies have documented a pronounced segmentation in the region 36°S - 41°S. However, information on the seaward continuation of the individual segments towards the Chile Trench is rare, as direct observations end at the coastline and are replaced by a less dense set of marine geophysical data. In this study we use swath bathymetric data combined with high and low-frequency reflection seismic data as well as results from heat-flow measurements to: (A) map and identify active deformation structures and investigate their spatial distribution, and (B) analyse the factors controlling segmentation along the Southern Chile Forearc. Considering the region 35°S to 40°S we found evidence for a division into four major segments; Concepcion North, Concepcion South, Nahuelbuta, and Tolten (from North to South). Within all four segments, the lower continental slope is dissected by distinct margin-parallel thrust ridges overlying active landward-dipping thrust faults, indicating the presence of an active accretionary prism. The middle and upper slope, however, shows major differences between the four segments. The Concepcion North Segment is dominated by a large margin-parallel thrust ridge. The Concepcion South Segment shows large up to 600 m high north-south aligned normal fault scarps highlighting east-west extension. The change from thrust to normal faulting domains is accompanied by a drastic decrease in surface heat-flow by a factor of up to four. Further south in the Nahuelbuta Segment, east-west trending active thrust ridges indicate north-south compression of this part of the forearc. Shortening in this segment is not only limited to the middle and upper slope, but includes the entire marine forearc and occurs perpendicular to the direction of plate convergence. In the southernmost Tolten Segment the middle and upper continental slope shows no signs of compressive or extensional deformation. For the factors controlling segmentation our data suggest that when considering the whole forearc variations in the overriding plate such as the position of continental fault zones are responsible for the large scale tectonic segmentation. The east-west oriented shortening structures in the Nahuelbuta Segment (perpendicular to the direction of plate motion) probably originate from the collision of the Chiloe Microplate with a marine buttress situated below the Concepcion South Segment. The Chiloe Microplate represents a 1000 km-sized forearc sliver, which is kinematically decoupled from stable South America along the Liquine-Ofqui and Lanalhue Fault Zones. The important transition from wholesale forearc compression to extension observed between the two Concepcion segments, however, is more likely related to plate boundary processes, i.e. different degrees of coupling and/or friction in the plate boundary itself.

Basement rocks of Halmahera, eastern Indonesia: Implications for the early history of the Philippine Sea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, R.G.N.; Ballantyne, P.

1990-06-01

The oldest rocks known on Halmahera, eastern Indonesia, are petrologically and chemically similar to supra-subduction ophiolites and include boninitic volcanics resembling those dredged from the Marianas forearc. The age of the ophiolitic rocks is unknown; in east Halmahera they are overlain by Late Cretaceous and Eocene volcanics and associated sediments. Similar volcanics form the basement of western Halmahera. Plutonic rocks intruding the ophiolite and associated metamorphic rocks also yield Late Cretaceous to Eocene radiometric ages. The petrology and chemistry of the igneous rocks indicate an island arc origin. These rocks are locally overlain by shallow-water Eocene limestones and all aremore » overlain unconformably by Neogene sediments. The Halmahera basement rocks have many structural, petrological, and stratigraphic similarities to submarine plateaus of the southern and northern Philippine Sea and basement terranes of the eastern Philippines. The authors suggest that these similarities indicate the existence of an extensive region of Late Cretaceous and Eocene volcanism built upon probable Mesozoic ophiolitic basement. The resultant thickened crust was later fragmented by spreading in the West Philippine Sea Central Basin and backarc spreading in the Eastern Philippine Sea. It is difficult to reconcile the present distribution of these crustal fragments with a linear arc, but equally difficult to propose a simple alternative. A proto-Philippine archipelago, with short-lived arcs separated by small oceanic basins, may be the closest modern analog. The development of younger subduction zones has been influenced by the distribution of thickened crustal fragments as they have re-amalgamated since the Miocene.« less

Sandstone detrital modes and basinal setting of the Trinity Peninsula Group, northern Graham Land, Antarctic Peninsula: A preliminary survey

NASA Astrophysics Data System (ADS)

Smellie, J. L.

Sandstone detrital modes for a representative sample of the Trinity Peninsula Group in northern Graham Land are described and assessed. Whereas the volumetrically dominant quartz and feldspar were derived principally from erosion of a plutonic and high-rank metamorphic terrane, the lithic population was derived mainly from a volcanic cover. The data clearly indicate the presence of two major sandstone suites (petro-facies I and II) with distinctive and probably separate provenances. Further scope for subdivision is limited by the small sample set, but four petrofacies (Ia, Ib, IIa, and IIb) may be present, three of which correspond with previously described lithostratigraphical units (Legoupil, Hope Bay, and View Point formations). The sample distribution and detrital modes enable approximate geographical limits to be assigned to each petrofacies for the first time, although the nature of the boundaries (stratigraphical or structural) is unknown. Petrofacies II could have been derived from an active magmatic arc and deposited in a forearc basin (sensu lato) or series of basins at a major consuming margin. Petrofacies I is a much more quartzose suite, although otherwise petrographically very similar to petrofacies II. Its depositional setting is ambiguous on the basis of the data presently available, and deposition can only be said to have occurred at either an active or a passive continental margin. Finally, there is the possibility that strike-slip faulting has structurally shuffled the Trinity Peninsula Group, causing the pronounced age and compositional contrasts observed.

Subduction-zone magnetic anomalies and implications for hydrated forearc mantle

USGS Publications Warehouse

Blakely, R.J.; Brocher, T.M.; Wells, R.E.

2005-01-01

Continental mantle in subduction zones is hydrated by release of water from the underlying oceanic plate. Magnetite is a significant byproduct of mantle hydration, and forearc mantle, cooled by subduction, should contribute to long-wavelength magnetic anomalies above subduction zones. We test this hypothesis with a quantitative model of the Cascadia convergent margin, based on gravity and aeromagnetic anomalies and constrained by seismic velocities, and find that hydrated mantle explains an important disparity in potential-field anomalies of Cascadia. A comparison with aeromagnetic data, thermal models, and earthquakes of Cascadia, Japan, and southern Alaska suggests that magnetic mantle may be common in forearc settings and thus magnetic anomalies may be useful in mapping hydrated mantle in convergent margins worldwide. ?? 2005 Geological Society of America.

Megathrust Slip and the Care and Feeding of the Subduction Channel Through which the Seismogenic Zone Runs

NASA Astrophysics Data System (ADS)

Scholl, D. W.; Kirby, S. H.; Keranen, K. M.; Wells, R. E.; Blakely, R. J.; Michael, F.; von Huene, R.

2007-12-01

HABITATS OF GREAT OFFSHORE EARTHQUAKES: High-magnitude earthquakes (Mw = or >8.5) and trans- oceanic tsunamis commonly nucleate along subduction zones (SZ) bordered by laterally continuous, sediment- flooded trenches. Examples include: south-central Chile (1960 Mw=9.5), eastern Alaska (1964 Mw=9.2), Sumatra (2004, Mw=9.1), Cascadia (historic 1700 Mw=9.0), Colombia (1906 Mw=8.8), Sumatra (historic 1883, Mw=8.8), west-central Aleutian (1965 Mw=8.7), central Aleutian (1986, Mw=8.7), Sumatra (2005 Mw=8.6), and Nankai (historic 1707, Mw=8.5). In thickness, sediment entering these SZ ranges from 2 to 3 km and the column is axially continuous for more than 800 km. The depositional pile is typically the clastic beds of a trench-axis turbidite wedge and underlying fan and abyssal plain deposits that accrued seaward of the trench axis. Great rupture events also occur at subduction zones receiving little sediment, for example the Kamchatka (1952, Mw=9.0) and the north Chile SZs (historic 1868 Mw=8.9). Both SZs are areas of rapid upper plate thinning, subsidence, and truncation effected by subduction erosion. WORKINGS OF THE SUBDUCTION CHANNEL (SC): Beneath the submerged forearc, the SC functions to transport subducted ocean floor sediment and tectonically eroded forearc debris toward and into the mantle. The SC is the lowest structural unit containing upper plate crustal material. It hosts the seismogenic zone, which probably runs along the SC's upper boundary commonly referred to as the interplate decollement. A thick, laterally continuous SC structurally smoothes or simplifies the surface of the interplate decollement and sets up conditions for lengthy, high moment-release ruptures. Maximum slip is commonly concentrated beneath the thinned crust underlying forearc basins. These structures, in positive feed-back, are likely deepened co- seismically by high-slip-rate enhanced basal subduction erosion. The detached material lowers the effective stress on the decollement and further evens this interface. The channel also works tectonically to underplate the base of the inner margin and induce uplift and co-seismic activation of high-angle reverse faults. CONSEQUENCES OF WHAT IS FED SUBDUCTION ZONES: Ridges and high relief entering the SZ can act to arrest lateral rupturing. Supplying sedimentary and erosional debris to the subduction channel appears to act differently and favors the continuation of rupture, rapid slip beneath crustally thinned areas that can be translated upward at forearc splay faults to generate trans-oceanic tsunamis, and nearshore reverse-fault can spawn near- field tsunamis. The potential for great earthquake nucleation along thickly sediment SZs must be set high. Similarly, seismogenic risk for highly erosional SZ little perturbed by subducting relief must also be set high. Margins undergoing rapid tectonic erosion produce regional tsunamis but perhaps not trans-oceanic waves of great destructiveness.

IODP Expedition 362: Initial results from drilling the Sumatra subduction zone - the role of input materials in shallow seismogenic slip and forearc plateau development

NASA Astrophysics Data System (ADS)

McNeill, L. C.; Dugan, B.; Petronotis, K. E.; Expedition 362 Scientists, I.

2016-12-01

IODP Expedition 362, August-October, 2016, plans to drill two boreholes within the input section of the Indian oceanic plate entering the North Sumatran subduction zone. In 2004, a Mw 9.2 earthquake ruptured the Sunda subduction zone from North Sumatra to the Andaman Islands, a length of 1500 km. The earthquake and tsunami devastated coastal communities around the Indian Ocean. This earthquake and the 2011 Tohoku-Oki Mw 9.0 earthquake showed unexpectedly shallow megathrust slip. In the case of North Sumatra, this shallow slip was focused beneath a distinctive plateau of the accretionary prism. This intriguing seismogenic behavior and forearc structure are not explained by existing models or by observations at other margins where seismogenic slip typically occurs farther landward. Expedition 362 will use core and log data in conjunction with in situ temperature and pressure measurements to document the lithology, structures, and physical and chemical properties of the input sediments. The input materials of the North Sumatran subduction zone are a distinctive, thick (up to 4-5 km) sequence of primarily Bengal-Nicobar Fan-related sediments. This sequence geophysically shows strong evidence for induration and dewatering and has probably reached the temperatures required for sediment-strengthening diagenetic reactions, and input materials may be key to driving the distinctive slip behavior and long-term forearc structure. The plate boundary fault (décollement) originates within the lower pelagic and submarine fan sediments so sampling this interval will help determine what controls décollement development and how its properties evolve. Initial results from the Expedition and plans for post-expedition experiments and modeling will be presented. These methods will be used to predict physical, thermal, fluid, and mechanical properties and diagenetic evolution of the sediments as stresses and temperatures increase due to burial and subduction. Results will be used to test the role of sediment properties in shallow earthquake slip and in the unusual forearc structure. In addition, the results will contribute to our understanding of a) Bengal-Nicobar fan history and records of Himalayan uplift, erosion and monsoon development, and b) stress conditions in a complexly deforming region of the Indian plate.

Forearc Sliver Translation, a Lack of Arc-Normal Strain Accumulation, and Interplate Thrust Earthquakes: GPS Geodesy in Western Nicaragua

NASA Astrophysics Data System (ADS)

Turner, H. L.; Mattioli, G. S.; Jansma, P. E.; Styron, R. H.

2007-05-01

We have been investigating the kinematics of the Nicaraguan forearc using campaign GPS measurements of our geodetic network made over the last seven years (Turner et al., 2007). We currently have interseismic velocities for 18 campaign sites and have installed 10 additional sites in the backarc to investigate the nature of the transition from forearc sliver motion to stable Caribbean Plate motion. Our work focusing on the later issue is presented elsewhere at this meeting (Styron et al., 2007). Corrections for modeled coseismic offsets from the Jan. 13, 2001 Mw7.7 earthquake off the coast of El Salvador have been applied to our campaign site velocities. Some of our time-series are also strongly affected by coseismic and postseismic effects of the Oct. 9, 2004 Mw6.9 earthquake off of the coast of Nicaragua. The geodetic effects of this event are being removed from the affected time-series for interseismic velocity analysis. We have also derived interseismic velocities for five continuous GPS sites in the region. Our GPS results confirm previous predictions of northwest transport of a forearc sliver with an average Northwest velocity of ~15 mm yr-1, but show little evidence for an arc- normal component of strain accumulation associated with locking on the subduction interface. However, the amount of seismicity along this section of the Middle America Trench, including several recent large events such as the 1992 Mw7.6 and 2004 Mw6.9 earthquakes, indicates some amount of locking is present. Several possibilities may account for the apparent contradiction between the GPS results and observed seismicity. The locked zone may be too shallow and too far offshore for the arc-normal component to show up in our network, or the arc-normal signal may be masked by post-seismic effects from the 1992 offshore earthquake. If coupling between the downgoing slab and the overriding plate is weak or limited to a small seismogenic zone, then arc-parallel motion of the forearc sliver may be driven by a more strongly coupled region to the south in Costa Rica. We are developing regional FEM and half-space dislocation models constrained by the GPS-derived kinematics to distinguish between these possibilities and explore the possible driving mechanisms for sliver motion.

Mantle Serpentinization near the Central Mariana Trench Constrained by Ocean Bottom Surface Wave Observations

NASA Astrophysics Data System (ADS)

Cai, C.; Wiens, D. A.; Lizarralde, D.; Eimer, M. O.; Shen, W.

2017-12-01

We investigate the crustal and uppermost mantle seismic structure across the Mariana trench by jointly inverting Rayleigh wave phase and group velocities from ambient noise and longer period phase velocities from Helmholtz tomography of teleseismic waveforms. We use data from a temporary deployment in 2012-2013, consisting of 7 island-based stations and 20 broadband ocean bottom seismographs, as well as data from the USGS Northern Mariana Islands Seismograph Network. To avoid any potential bias from the starting model, we use a Bayesian Monte-Carlo algorithm to invert for the azimuthally-averaged SV-wave velocity at each node. This method also allows us to apply prior constraints on crustal thickness and other parameters in a systematic way, and to derive formal estimates of velocity uncertainty. The results show the development of a low velocity zone within the incoming plate beginning about 80 km seaward of the trench axis, consistent with the onset of bending faults from bathymetry and earthquake locations. The maximum depth of the velocity anomaly increases towards the trench, and extends to about 30 km below the seafloor. The low velocities persist after the plate is subducted, as a 20-30 km thick low velocity layer with a somewhat smaller velocity reduction is imaged along the top of the slab beneath the forearc. An extremely low velocity zone is observed beneath the serpentine seamounts in the outer forearc, consistent with 40% serpentinization in the forearc mantle wedge. Azimuthal anisotropy results show trench parallel fast axis within the incoming plate at uppermost mantle depth (2%-4% anisotropy). All these observations suggest the velocity reduction in the incoming plate prior to subduction results from both serpentinized normal faults and water-filled cracks. Water is expelled from the cracks early in subduction, causing a modest increase in the velocity of the subducting mantle, and moves upward and causes serpentinization of the outer forearc. Assuming the velocity anomaly remaining in the subducting plate mantle is caused by serpentinization, calculations suggest the top 20 km of the slab mantle retains 10-15% serpentinization beyond the outer forearc. The amount of water carried into the deep mantle by this layer ( 54 Tg/Myr/m) is two to three times greater than previous estimates for the entire slab.

The Junction of Hellenic and Cyprus Arcs: the Bey Daglari Lineament, Offshore Termination of the Antalya Basin

NASA Astrophysics Data System (ADS)

Gogacz, A.; Hall, J.; Cifci, G.; Yasar, D.; Kucuk, M.; Yaltirak, C.; Aksu, A.

2009-05-01

The Antalya Basin is one of a series of basins that sweep along the Cyprus Arc in the forearc region between the (formerly) volcanic Tauride Mountains on Turkey in the north and the subduction zone and associated suture between the African plate and the Aegean-Anatolian microplate in the eastern Mediterranean, south of Cyprus. Miocene contraction occurs widely on southwest verging thrusts. Pliocene-Quaternary structures vary from extension/transtension in the northeast, adjacent to the Turkish coastline, to transpression in the southwest, farther offshore. All these structures are truncated at the northwest end of the Antalya Basin by a broad zone of NNE-SSW-trending transverse structure that appears to represent a prolongation of the extreme easterly transform end of the Hellenic arc. Our mapping suggests that this broad zone links the Hellenic Arc with the Isparta Angle in southern Turkey, which we suggest is an earlier location of the junction of Hellenic and Cyprus Arcs: the junction migrated to the southwest over time, as the Hellenic Arc rolled back. The Turkish coastline turns from parallel to the Antalya Basin structures in the east to a N-S orientation, cutting across the trend of the Antalya Basin. The Antalya Complex and the Bey Dağları Mountains provide a spectacular backdrop to this edge of the offshore basin. Somewhere offshore lies the structural termination of the Antalya Basin. In 2001, we acquired around 400 km of high-resolution multi-channel seismic reflection data across the western end of the Antalya Basin to explore the nature of the termination, which we call the Bey Dağları lineament. We present a selection of the seismic profiles with interpretation of the nature and Neogene history of the lineament. Landward of the N-S-trending coastline, ophiolites of the Antalya Complex are exposed in a series of westerly-verging thrust slivers that extend to the carbonate sequences of the Bey Dağları Mountains. Our seismic data indicate that N-S trending west- and east-verging thrusts define a transpressional continental margin. The shelf is underlain by a prominent angular unconformity between overlying shallow-dipping Pliocene-Quaternary sediments and underlying, easterly- dipping ?Miocene sediments.

Geochemistry of Early Paleozoic boninites from the Central Qilian block, Northwest China: Constraints on petrogenesis and back-arc basin development

NASA Astrophysics Data System (ADS)

Gao, Zhong; Zhang, Hong-Fei; Yang, He; Luo, Bi-Ji; Guo, Liang; Xu, Wang-Chun; Pan, Fa-Bin

2018-06-01

Early Paleozoic boninites occur in the Central Qilian orogenic belt, Northwest China. Their petrogenesis provides insights into lithosphere process and tectonic evolution of the Qilian block. In this paper, we carry out a study of geochronological, geochemical and Sr-Nd isotopic compositions for the Early Paleozoic boninites in the Lajishan area of the Central Qilian block. The Lajishan boninites (∼483 Ma) have high Al2O3/TiO2 (36.7-64.7) and CaO/TiO2 (31.1-49.6) ratios, and high MgO (7.86-10.47 wt%), Cr (439-599 ppm) and Ni (104-130 ppm) contents, indicating that the boninites result from a refractory mantle source. They are depleted in high field-strength elements (HFSE) and enriched in large ion lithophile elements (LILE), coupled with slightly high initial 87Sr/86Sr values of 0.7059-0.7074 and low εNd(t) values of -1.05 to +2.66, indicating that the mantle source was metasomatized by subducted slab-derived components. We found that an assemblage of low-Ca group and high-Ca group boninites occurred in the Lajishan belt. The high-Ca group boninites were derived from relatively fertile mantle with slightly higher melting degree, whereas the low-Ca group boninites were generated by partial melting of more refractory mantle wedge peridotites with slightly lower melting degree. The assemblage of low-Ca group and high-Ca group boninites reveals that the low-Ca group boninites were generated by the further melting of the more refractory mantle source after the segregation of the high-Ca group boninitic magmas in response to the back-arc basin opening. In the light of reported boninites worldwide, a diagram of Zr/Y vs. CaO/Al2O3 is used to identify boninites in fore-arc and back-arc regions. We suggest that the Lajishan boninites represent the products of back-arc basin development in response to the northward subduction of the Qaidam-West Qinling ocean slab.

Middle Cretaceous to Oligocene rise of the Middle American landbridge - documented by south-eastwards younging shallow water carbonates

NASA Astrophysics Data System (ADS)

Baumgartner-Mora, Claudia; Baumgartner, Peter O.; Barat, Flore

2013-04-01

Basements of Southern Central America are oceanic in origin, including the southern half of the classical "Chortis Block" formed by subduction/accretion mélanges named Mesquito Composite Oceanic Terrane (MCOT). The rise of these oceanic basements into the photic zone and eventual emergence was controlled by convergent, collision tectonics, and/or arc development. In this context, shallow carbonate palaeo-environments were short-lived and formed not only on uplifted basements and arcs, but also on (now accreted) volcanic edifices of Pacific oceanic seamounts. From Northern Nicaragua (NW) to Eastern Panama (SE) we observe a systematic younging of the first shallow water carbonate facies encroaching on basements and/or older deep-water formations: In the Siuna area (NE-Nicaragua) Aptian-Albian shallow water limestones dated by rudists and Orbitolina texana rest unconformably on the Jurassic/Early Cretaceous Siuna Serpentinite Mélange, part of the MCOT. In N-Costa Rica, the assembly of several terranes (Santa Elena Ultramafic Unit, Nicoya Complex s. s., Matambu and Manzanillo Terranes) is overlapped by Late Campanian-Maastrichtian shallow water facies dated by rudists and Larger Foraminifera, such as Pseudorbitoides rutteni, Pseudorbitoides israelski, Sulcoperculina sp. and Sulcoperculina globosa. Reworked Campanian-Maastrichtian shallow water material including Larger Foraminifera was found in the Herradura Promontory (central Pacific coast of Costa Rica). It could be derived from an accreted seamount. No shallow carbonates are known so far from the early Palaeocene. The Tempisque Basin (N-Costa Rica) hosts the Barra Honda carbonate Platform (originally >900 km2) dated as late Palaeocene (Thanetian) by planktonic Foraminifera, 87Sr / 86Sr ratios and Ranikothalia spp. Other late Palaeocene shallow carbonates documented in S-Costa Rica/W-Panama (Quepos, Burica) are interpreted as insular carbonate shoals (atolls?) on now accreted seamounts. To the SE of the S-Nicoya fault line (Central Costa Rica) Late Cretaceous oceanic plateaus may represent actual outcrops of the trailing edge of the Caribbean Large Igneous Province (CLIP). These include the SE corner of the Herradura Promontory (Costa Rica) and the Azuero Plateau cropping out in Coiba, Sona and Azuero (Panama). CLIP formation triggered a new, E-dipping subduction zone and Campanian-Maastrichtian arc initiation on the CLIP edge. By middle to late Eocene times this Middle American Arc and forearc areas reached the photic zone leading to widespread formation of carbonate banks/ramps. They are dated by many Larger Foraminifera of the genera Amphistegina, Asterocyclina, Discocyclina, Euconoloides, Eofabiania, Fabiania, Gypsina, Helicolepidina, Heterostegina, , Lepidocyclina, Linderina, Neodiscocyclina, Nummulites, Operculina, Orthophragmina, Polylepidina, Proporocyclina, and Sphareogypsina. The first shallow carbonates that encroach on arc/forearc basements in Panama are dated as Late Eocene in Azuero and the Canal Basin and as Oligocene, dated by Lepidocyclina miraflorensis, L. giraudi, L. canellei around the Chucunaque Basin of Eastern Panama. Progressive shallowing of the trailing edge of the Caribbean plate from NW (middle/Late Cretaceous) to SE (Late Eocene-Oligocene) implies a growing restriction of the Atlantic - Caribbean - Pacific seaway that must have affected global circulation patterns, to be considered in palaeo-oceanographic/palaeo-climatic models of the Late Cretaceous -Tertiary.

Paleomagnetic Constraints on the Forearc Deformation History of the Costa Rican Convergent Margin

NASA Astrophysics Data System (ADS)

Li, Y. X.; Zhao, X.; Xie, S.; Jovane, L.; Petronotis, K. E.

2017-12-01

We conducted a detailed paleomagnetic investigation of IODP Site U1380 located on the middle slope of the forearc wedge in order to examine the deformation history of the Costa Rican erosive convergent margin. Hole U1380C recovered a sedimentary section from 440 to 800 meters below seafloor (mbsf) consisting of, from bottom to top, silty claystone, clayey siltstone and sandstone, and silty clay. Anisotropy of magnetic susceptibility (AMS) data show predominantly oblate fabrics with the Kmin axes tilted off the vertical. Also, the degree of the Kmin tilt appears to generally track changes in bedding dip that was measured shipboard and thus can be used as a steepness proxy of tilted strata. An interval of strong deformation from 490 to 550 mbsf is indicated by the occurrence of abundant foliations that are shallower than the bedding. The interval of strong deformation is constrained from 1.95 to 1.83 Ma based on the detailed paleomagnetic investigation, together with biostratigraphic constraints. A comparative analysis of the deformation history from proximal middle slope Site U1378, frontal prism Site U1412, and upper slope Site U1379 reveals that a strongly deformed, wedge-shaped veneer of sediments formed between 2.0 and 1.9 Ma on the forearc. The short-lived, widespread, and strong forearc deformation in the Costa Rican margin is interpreted as the result of the abrupt onset of Cocos Ridge subduction. The results of this study provide supportive evidence for the "depositionary forearc" model for an erosive convergent margin.

Physical Properties and Seismic Structure of Izu-Bonin-Mariana Fore Arc crust: Results From IODP Expedition 352 and Comparison with Oceanic Crust

NASA Astrophysics Data System (ADS)

Christeson, G. L.; Morgan, S.; Kodaira, S.; Yamashita, M.

2015-12-01

Most of the well-preserved ophiolite complexes are believed to form in supra-subduction zone settings. One of the goals of IODP Expedition 352 was to test the supra-subduction zone ophiolite model by drilling forearc crust at the northern Izu-Bonin-Mariana (IBM) system. IBM forearc drilling successfully cored 1.22 km of volcanic lavas and underlying dikes at four sites. A surprising observation is that basement compressional velocities measured from downhole logging average ~3.0 km/s, compared to values of 5 km/s at similar basement depths at oceanic crust sites 504B and 1256D. Typically there is an inverse relationship in extrusive lavas between velocity and porosity, but downhole logging shows similar porosities for the IBM and oceanic crust sites, despite the large difference in measured compressional velocities. These observations can be explained by a difference in crack morphologies between IBM forearc and oceanic crust, with a smaller fractional area of asperity contact across cracks at EXP 352 sites than at sites 504B and 1256D. Seismic profiles at the IBM forearc image many faults, which may be related to the crack population.

Seismic properties of Leg 195 serpentinites and their geophysical implications

USGS Publications Warehouse

Courtier, Anna M.; Hart, David J.; Christensen, Nikolas I.; Shinohara, Masanao; Salisbury, Matthew H.; Richter, Carl

2006-01-01

Knowledge of seismic velocities is necessary to constrain the lithologies encountered in seismic studies. We measured the seismic velocities, both compressional and shear wave, of clasts recovered during Ocean Drilling Program Leg 195 from a serpentine mud volcano, the South Chamorro Seamount. The compressional wave velocities of these clasts vary from a lower value of 5.5 km/s to an upper value of 6.1 km/s at a confining stress of 200 MPa. The shear wave velocities vary from a lower value of 2.8 km/s to an upper value of 3.3 km/s at a confining stress of 200 MPa. The densities of the samples vary from 2548 to 2701 kg/m3. These velocities and densities are representative of the highly serpentinized harzburgite and dunite mineralogy of the clasts. Velocities from a seismic study of the Izu-Bonin forearc wedge were used to calculate the degree of serpentinization in the forearc wedge. The seismic velocities of the forearc wedge are higher than the velocities of the clasts recovered from the South Chamorro Seamount, suggesting that the clasts are more serpentinized than the forearc wedge.

Forearc kinematics in obliquely convergent margins: Examples from Nicaragua and the northern Lesser Antilles

NASA Astrophysics Data System (ADS)

Turner, Henry L., III

In this study, I use surface velocities derived from GPS geodesy, elastic half-space dislocation models, and modeled Coulomb stress changes to investigate deformation in the over-riding plate at obliquely convergent margins at the leading and trailing edges of the Caribbean plate. The two principal study areas are western Nicaragua, where the Cocos plate subducts beneath the Caribbean plate, and the northern Lesser Antilles, where the North American plate subducts beneath the Caribbean plate. In Nicaragua, plate convergence is rapid at 84 mm yr1 with a small angle of obliquity of 10° along a slightly concave portion of the Middle America Trench. GPS velocities for the period from 2000 to 2004 from sites located in the Nicaraguan forearc confirmed forearc sliver motion on the order of ˜14 mm yr1 in close agreement with the value predicted by DeMets (2001). These results are presented here in Chapter 3 and were reported in Geophysical Research Letters (Turner et al., 2007). GPS observations made on sites located in the interior and on the eastern coast of Nicaragua during the same time period were combined with new data from eastern Honduras to help better constrain estimates of rigid Caribbean plate motion (DeMets et al., 2007). Slip approaching the plate convergence rate along the Nicaraguan and El Salvadoran sections of the Middle America Trench was quantitatively demonstrated by finite element modeling of this section of the plate interface using GPS velocities from our Nicaraguan network together with velocities from El Salvador and Honduras as model constraints (Correa-Mora, 2009). The MW 6.9 earthquake that ruptured the seismogenic zone offshore Nicaragua on October 9, 2004 resulted in coseismic displacements and post-seismic motion at GPS sites in the central part of the Nicaraguan forearc that currently prevent extension of interseismic time-series in this region. An elastic half-space dislocation model was used to estimate coseismic displacements at these sites and to qualitatively examine the observed post-seismic motion. Coseismic and post-seismic motion in this portion of the forearc indicate that long-term motion of the forearc across the earthquake cycle may proceed in a zig-zag pattern, which may contribute to east-west extension as observed in the Managua graben. Sites to the northwest and southeast were not substantially effected by the earthquake, and longer duration time-series (˜7 yrs) from these areas support the earlier estimates of forearc sliver motion. Results from our analysis of Nicaraguan GPS time-series from 2004--2008 and our earthquake modeling efforts are discussed in Chapter 4 and will form the basis of an article to be submitted for publication. In the northern Lesser Antilles, plate convergence is slow at ˜2 cm yr1, and obliquity varies substantially along the convex Lesser Antilles Subduction Zone. In chapter 5, I present GPS velocities derived from a decade of observations on sites in the northern Lesser Antilles and Virgin Islands. The velocities support forearc sliver motion on the order of ˜2--3 mm yr1 consistent with the lower value estimated by Lopez et al. (2006), indicating convergence in the northern region is only partially partitioned. GPS velocities in the northern Lesser Antilles show considerable variation between islands, suggesting possible independent block motion and internal deformation within the forearc region, however, velocity uncertainties for some sites remain high and may reflect the low signal-to-noise ratio of our residual velocities for the region. The lack of a substantial arc-normal component of shortening is similar to that seen in Nicaragua and may indicate a small amount of locking along the subduction interface with forearc sliver motion being driven from a more fully locked region south of Guadeloupe where the Barracuda and Tiburon aseismic ridges impinge on the subduction zone. (Abstract shortened by UMI.)

Accommodation by Varying Strain Regimes along the Northern Luzon Arc (Coastal Range, Taiwan) - Insights from Focal Mechanism Strain Inversions

NASA Astrophysics Data System (ADS)

O'Hara, D.; Lee, J.; Lewis, J. C.; Rau, R.

2013-12-01

Taiwan is the product of modern subduction polarity reversal coupled with arc-continent collision. The NW-moving Philippine Sea plate (PSP) subducts beneath the Eurasian plate (EUR) to the northeast of Taiwan at the Ryukyu trench, while overriding EUR south of Taiwan at the Manila trench, bringing the Luzon volcanic arc into collision with the deforming sediments of the Eurasian passive margin. The obliquity between the N-S trending Luzon Arc (LA) and NE-SW trending passive margin is causing the southward, temporal propagation of collision since ~6 Ma. The collided forearc and clastic sediments accreted by the advancing arc created the Coastal Range (CR), whose western-most extent lies at the suture zone between the two plates, the NNE-SSW trending Longitudinal Valley Fault (LVF). In order to understand the change in stress along the northern LA as it docks onto EUR, we inverted over 1900 relocated earthquake focal mechanism solutions within the on-land CR and offshore LA regions for spatial strain tensors. The focal mechanisms cover seismicity from 1991-2013, ranging in depths 0-112 km and magnitudes 2.22-6.92. For our analyses, we grouped the focal mechanisms based on 15' Latitudinal intervals along the study area and inverted the data for best-fit strain tensors using a micropolar continuum model of crustal deformation. Results suggest dominant compression in all regions with accommodation occurring through oblique reverse faults of varying dips. Trends of σ1 rotate clockwise (CW) from 100° in the south to 155° in the north. This CW rotation is also observed in the preferred nodal plane slip vector trends - from E-W orientation in the south to NW-SE in the north. The rotation of σ1 and slip vector trends creates varying degrees of obliquity with the direction normal (DN) to CR (112°). The trends in the southern part of the study area show obliquity counterclockwise (CCW) to DN; trends in the central part are near parallel to DN; and trends in the northern part show obliquity CW to DN. GPS vectors from 2008-2012 using an ITRF reference frame show similar changes in obliquity with GPS velocity trends oblique CCW and CW to DN in the southern and northern areas, respectively, and near parallel to DN in the central area. Our results suggest the accommodation of three varying strain regimes along the northern LA (CR) system - (1) strain partitioning within the Manila forearc basin due to the obliquity between N-S trending LA and NW trending convergence vector; (2) convergence-related strain in the central LVF and CR along NNE trending major thrust faults with a small oblique component due to the obliquity between DN and the convergence vector; and (3) strain partitioning along the Ryukyu trench and forearc basin due to the obliquity between northward subducting plate along the WNW- ESE trending Ryukyu trench and NW convergence vector. As a result, the different subducting characteristics of strain regimes correspond to the different stages of arc accretion/collision, from south to north: pre-collision, present collision, waning collision, and subduction.

Structure and tectonics of the northwestern United States from EarthScope USArray magnetotelluric data

USGS Publications Warehouse

Bedrosian, Paul A.; Feucht, Daniel W.

2014-01-01

The magnetotelluric component of the EarthScope USArray program has covered over 35% of the continental United States. Resistivity tomography models derived from these data image lithospheric structure and provide constraints on the distribution of fluids and melt within the lithosphere. We present a three-dimensional resistivity model of the northwestern United States which provides new insight into the tectonic assembly of western North America from the Archean to present. Comparison with seismic tomography models reveals regions of correlated and anti-correlated resistivity and velocity that help identify thermal and compositional variations within the lithosphere. Recent (Neogene) tectonic features reflected in the model include the subducting Juan de Fuca–Gorda plate which can be traced beneath the forearc to more than 100 km depth, high lithospheric conductivity along the Snake River Plain, and pronounced lower-crustal and upper-mantle conductivity beneath the Basin and Range. The latter is abruptly terminated to the northwest by the Klamath–Blue Mountains Lineament, which we interpret as an important structure during and since the Mesozoic assembly of the region. This boundary is interpreted to separate hot extended lithosphere from colder, less extended lithosphere. The western edge of Proterozoic North America, as indicated by the Cretaceous initial 87Sr/86Sr = 0.706 contour, is clearly reflected in the resistivity model. We further image an Archean crustal block (“Pend Oreille block”) straddling the Washington/Idaho border, which we speculate separated from the Archean Medicine Hat block in the Proterozoic. Finally, in the modern Cascades forearc, the geometry and internal structure of the Eocene Siletz terrane is reflected in the resistivity model. The apparent eastern edge of the Siletz terrane under the Cascades arc suggests that pre-Tertiary rocks fill the Washington and Oregon back-arc.

Active backstop faults in the Mentawai region of Sumatra, Indonesia, revealed by teleseismic broadband waveform modeling

NASA Astrophysics Data System (ADS)

Wang, Xin; Bradley, Kyle Edward; Wei, Shengji; Wu, Wenbo

2018-02-01

Two earthquake sequences that affected the Mentawai islands offshore of central Sumatra in 2005 (Mw 6.9) and 2009 (Mw 6.7) have been highlighted as evidence for active backthrusting of the Sumatran accretionary wedge. However, the geometry of the activated fault planes is not well resolved due to large uncertainties in the locations of the mainshocks and aftershocks. We refine the locations and focal mechanisms of medium size events (Mw > 4.5) of these two earthquake sequences through broadband waveform modeling. In addition to modeling the depth-phases for accurate centroid depths, we use teleseismic surface wave cross-correlation to precisely relocate the relative horizontal locations of the earthquakes. The refined catalog shows that the 2005 and 2009 "backthrust" sequences in Mentawai region actually occurred on steeply (∼60 degrees) landward-dipping faults (Masilo Fault Zone) that intersect the Sunda megathrust beneath the deepest part of the forearc basin, contradicting previous studies that inferred slip on a shallowly seaward-dipping backthrust. Static slip inversion on the newly-proposed fault fits the coseismic GPS offsets for the 2009 mainshock equally well as previous studies, but with a slip distribution more consistent with the mainshock centroid depth (∼20 km) constrained from teleseismic waveform inversion. Rupture of such steeply dipping reverse faults within the forearc crust is rare along the Sumatra-Java margin. We interpret these earthquakes as 'unsticking' of the Sumatran accretionary wedge along a backstop fault separating imbricated material from the stronger Sunda lithosphere. Alternatively, the reverse faults may have originated as pre-Miocene normal faults of the extended continental crust of the western Sunda margin. Our waveform modeling approach can be used to further refine global earthquake catalogs in order to clarify the geometries of active faults.

Forearc structure in the Lesser Antilles inferred from depth to the Curie temperature and thermo-mechanical simulations

NASA Astrophysics Data System (ADS)

Gailler, Lydie; Arcay, Diane; Münch, Philippe; Martelet, Guillaume; Thinon, Isabelle; Lebrun, Jean-Frédéric

2017-06-01

Imaging deep active volcanic areas remains a challenge in our understanding of their activity and evolution, especially in subduction zones. Study of magnetic anomalies is appropriate to access such dynamics in depth. The magnetic anomaly pattern of the Lesser Antilles Arc (LAA) subduction is studied through Curie Point Depth (CPD), interpreted as the depth of the 580 °C isotherm, and developed to better assess the deep thermal structure of the arc. The depth of the estimated CPD exhibits a complex topography. Keeping in mind the overall uncertainty associated with this method, a main doming is evidenced below the Guadeloupe archipelago. Its apex is shifted towards the ancient arc, suggesting a very hot state of the fore-arc/arc domain. To better understand the LAA thermal state, we perform 2D thermo-mechanical simulations of the subduction zone. Recalling that magnetite is a serpentinization by-product, we simulate water transfer triggered by slab dehydration to test the assumption of fore-arc serpentinization suggested by the positive magnetic anomaly in the vicinity of the Guadeloupe archipelago. In this area, the subduction-induced arc lithosphere hydration and related weakening trigger a fast heating of the upper plate by basal convective removal. This process of fast arc lithosphere thinning may apply where simultaneously the volcanic arc is split in two and normal convergence is high enough. As serpentinization strongly decreases P-wave velocity, we propose a new interpretation of a published seismic profile below Guadeloupe. The seismic layer previously interpreted as the arc lower crust may rather be a layer of serpentinized mantle, as supported by spatial correlations between gravimetric and magnetic anomalies. Consequently, at the scale of Guadeloupe Island, the fore-arc Moho would be shallower than initially assumed, with a dome shape more consistent with both the extensive deformation active since the Oligocene in the inner fore-arc and the CPD doming.

Revised version of the Cenozoic Collision along the Zagros Orogen, Insights from Cr-spinel and Sandstone Modal Analyses.

PubMed

Gholami Zadeh, Parisa; Adabi, Mohammad Hossein; Hisada, Ken-Ichiro; Hosseini-Barzi, Mahboubeh; Sadeghi, Abbas; Ghassemi, Mohammad Reza

2017-09-07

Geoscientists have always considered the Neyriz region, located along the Zagros Suture Zone, an important area of interest because of the outcrops of Neotethys ophiolitic rocks. We carried out a modal analysis of the Cenozoic sandstones and geochemistry of the detrital Cr-spinels at Neyriz region in order to determine their provenance and tectonic evolution in the proximal part of Zagros Basin. Our data shows a clear change in provenance from the Late Cretaceous onwards. As from the Late Cretaceous to Eocene, lithic grains are mostly chert and serpentinite; and higher Cr# values of the detrital Cr-spinel compositions indicate that they originate from the fore-arc peridotites and deposited in an accretionary prism setting during this period. From the Late Oligocene to the Miocene periods, volcaniclastic and carbonate lithic grains show an increasing trend, and in the Miocene, metasedimentary lithic grains appear in the sediments. Ophiolite obduction caused a narrow trough sub-basin to be formed parallel to the general trend of the Zagros Orogeny between the Arabian and Iranian plates in Oligocene. From the Miocene onwards, the axial metamorphic complex belt was uplifted in the upper plate. Therefore, the collision along the Zagros Suture Zone must have occurred in the Late Oligocene.

Evidence of Fluid/Gas Along the Backthrust Offshore Central Sumatra from Seismic Full Waveform Inversion

NASA Astrophysics Data System (ADS)

Singh, S. C.; Huot, G.

2014-12-01

The Sumatra subduction zone is one of the most seismically active zones on the earth and has experienced great earthquakes in the last decade, including one of the largest earthquakes of the 21st century on December 26, 2004 (M 9.3) producing a devastating tsunami. Geodetic and seismological studies suggest that a part of the subduction is still fully locked and may produce a great earthquake up to Mw=9 in the coming future. In order to understand the earthquake and subduction zone processes, we applied elastic full waveform inversion (FWI) on 50km deep seismic reflection data from Benkulu forearc basin. Data were acquired in partnership with CGG in 2009 using a 15 km ultra-long offset streamer, with shots every 50m and receivers every 12.5m. Unlike usual exploration data, the streamer was dived at 22.5m and the source was triggered at 15m. These characteristics provided wide aperture and low frequencies to the data which are required for FWI. To match our modelling with the observed data before applying FWI, we first estimated the source wavelet from simulated far-offset signature. Then, the same pass-band filter was applied to both the source and the observed data from 1 to 15 Hz frequency bandwidth. Additionally, an f-k filter was applied to the real data to remove the remaining swell noise up to 4 Hz, without losing any useful signal. Our starting 2D Vp model was found by applying traveltime tomography to a smooth 1D model. Our Vs model was linked by empirical relationship to our Vp model. By inverting first for far-offset refraction to recover the background velocity model and using a multi-scale strategy by going from 1Hz to 15Hz, we image the forearc basin down to 10km depth. We highlight the presence of a 10km wide low velocity structure at 3km depth. The sharp velocity change from 4km/s to 2km/s indicates the presence of gaz or fluid which could come from the mantle through the backthrust fault. The complexity of the sea floor makes the reflection challenging to invert but could give higher resolution. We are expecting improvement in the next months.

Sedimentary Signatures of Submarine Earthquakes: Deciphering the Extent of Sediment Remobilization from the 2011 Tohoku Earthquake and Tsunami and 2010 Haiti Earthquake

NASA Astrophysics Data System (ADS)

McHugh, C. M.; Seeber, L.; Moernaut, J.; Strasser, M.; Kanamatsu, T.; Ikehara, K.; Bopp, R.; Mustaque, S.; Usami, K.; Schwestermann, T.; Kioka, A.; Moore, L. M.

2017-12-01

The 2004 Sumatra-Andaman Mw9.3 and the 2011 Tohoku (Japan) Mw9.0 earthquakes and tsunamis were huge geological events with major societal consequences. Both were along subduction boundaries and ruptured portions of these boundaries that had been deemed incapable of such events. Submarine strike-slip earthquakes, such as the 2010 Mw7.0 in Haiti, are smaller but may be closer to population centers and can be similarly catastrophic. Both classes of earthquakes remobilize sediment and leave distinct signatures in the geologic record by a wide range of processes that depends on both environment and earthquake characteristics. Understanding them has the potential of greatly expanding the record of past earthquakes, which is critical for geohazard analysis. Recent events offer precious ground truth about the earthquakes and short-lived radioisotopes offer invaluable tools to identify sediments they remobilized. In the 2011 Mw9 Japan earthquake they document the spatial extent of remobilized sediment from water depths of 626m in the forearc slope to trench depths of 8000m. Subbottom profiles, multibeam bathymetry and 40 piston cores collected by the R/V Natsushima and R/V Sonne expeditions to the Japan Trench document multiple turbidites and high-density flows. Core tops enriched in xs210Pb,137Cs and 134Cs reveal sediment deposited by the 2011 Tohoku earthquake and tsunami. The thickest deposits (2m) were documented on a mid-slope terrace and trench (4000-8000m). Sediment was deposited on some terraces (600-3000m), but shed from the steep forearc slope (3000-4000m). The 2010 Haiti mainshock ruptured along the southern flank of Canal du Sud and triggered multiple nearshore sediment failures, generated turbidity currents and stirred fine sediment into suspension throughout this basin. A tsunami was modeled to stem from both sediment failures and tectonics. Remobilized sediment was tracked with short-lived radioisotopes from the nearshore, slope, in fault basins including the deepest, offering a comprehensive characterization of sediment remobilization by a transform earthquake. These and other modern case studies will improve our ability to recognize earthquake-related sedimentation events, to differentiate them from other causes, and to decipher in them important characteristics of the earthquakes.

The IODP NanTroSEIZE Transect: Accomplishments and Future Plans

NASA Astrophysics Data System (ADS)

Tobin, H. J.; Kinoshita, M.; Araki, E.; Byrne, T. B.; Kimura, G.; McNeill, L. C.; Moore, G. F.; Saffer, D. M.; Underwood, M.; Saito, S.

2009-12-01

The Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) is a decade-long project to investigate the processes and properties that determine the nature of frictional locking, creep and other fault behavior governing seismogenic rupture and tsunamigenesis on a major plate boundary where great subduction earthquakes occur. The main goal of the science plan is to sample and instrument the key faults in several locations across the transition from those dominated by frictionally stable, aseismic processes vs. those hypothesized to be frictionally locked (seismogenic) faults of the megathrust system. The transect includes primary drill sites from the incoming plate, across the outer accretionary complex of the lower slope, to the Kumano forearc basin and underlying up-dip end of the likely locked plate interface. The scale of this project required a division into multiple stages of operations, spanning a number of years and IODP expeditions. From September 2007 through October 2009, the NanTroSEIZE science team has achieved many of its primary goals during 5 expeditions. Completed drill sites to date include penetrations ranging from ~200 m to ~1600 m below the sea floor that have documented the faults and wall rocks of both the frontal thrust and out-of-sequence splay faults in the accretionary system, the sedimentary section of the subducting plate, and the thick forearc basin sedimentary record and underlying older subduction complex in the hanging wall of the main plate interface. Major results include characterization of: the fault zone geology, strain localization, and physical properties shallower than ~ 1 km, the distribution of ambient (and paleo-) stress orientations across the transect, the absence of evidence for focused fluid channeling along the principal shallow fault systems, and the tectonic history of the subduction system. Extensive downhole measurements and a 2-ship VSP have further documented stress, pressure, rock strength, and elastic properties around the boreholes. The first temporary long-term monitoring instruments are now in place in one sealed borehole, recording pore pressure and temperature. The most ambitious aspect of the NanTroSEIZE project remains for the now-scheduled next stage: drilling to ~ 7000 m below the sea bed across the faults of the main plate boundary, then placing long-term monitoring instruments into both deep and shallow sealed borehole observatories - all to test hypotheses of locking, strain accumulation, and interseismic fault processes.

Fore- and Back-Arc Structures Along the Hikurangi-Kermadec Subduction Zone

NASA Astrophysics Data System (ADS)

Scherwath, M.; Kopp, H.; Flueh, E. R.; Henrys, S. A.; Sutherland, R.

2009-04-01

The Hikurangi-Kermadec subduction zone northeast of New Zealand represents an ideal target to study lateral variations of subduction zone processes. The incoming Pacific plate changes from being a large igneous province, called the Hikurangi Plateau, in the south to normal oceanic plate north of the Rapuhia Scarp. The overriding Australian plate is continental in the south, forming the North Island of New Zealand, and changes to an island arc in the north. Further lateral variability exists in changes in volcanic and hydro-thermal activity, transitions from accretion to subduction erosion, backarc spreading and rifting, and is accompanied by northward increasing seismicity. As part of the MANGO project (Marine Geoscientific Investigations on the Input and Output of the Kermadec Subduction Zone), four marine geophysical transects of largely seismic reflection and refraction data provide constraints on the upper lithospheric structures across the Hikurangi-Kermadec Trench between 29-38 degrees South. On MANGO profile 1 in the south, the initially shallow subduction of the incoming plateau coincides with crustal underplating beneath the East Cape ridge. To the west lies the 100 km wide and over 10 km deep Raukumara Basin. Seismic velocities of the upper arc mantle are around 8 km/s and are considered normal. In contrast, on MANGO profile 4, about 1000 km to the north around the volcanically active Raoul Island, the incoming oceanic crust appears to bend considerably steeper and thus causes a 50 km narrower forearc with a smaller forearc basin. Furthermore, the upper mantle velocities in both plates are relatively low (7.4-7.7 km/s), likely indicating strong bending related deformation of the incoming plate and thermal activity within the arc possibly due to spreading. Here, arc volcanism is relatively active, with many large volcanoes directly on the ridge. The central two transects MANGO 2 and 3, though without data coverage of the structure of the incoming plate, are more similar to MANGO 4. The arc regions appear to be strongly affected by the activity of the arc. The arc crust of the northern MANGO 3 becomes significantly thinner in the backarc region due to extension, and much reduced volcanism behind the ridge. The structures on MANGO 2, on the other hand, cover strong and densely spaced thermal activity from the adjacent arc volcanism, possibly linked to a recent, fluid-rich passage of the Hikurangi Plateau.

Petrology and Geochemistry of Serpentinized Peridotites from a Bonin Fore-arc Seamount

NASA Astrophysics Data System (ADS)

Tian, L.; Tuoyu, W.; Dong, Y. H.; Gao, J.; Wu, S.

2016-12-01

Serpentinites, which contain up to 13 wt.% of water, are an important reservoir for chemical recycling in subduction zones. During the last two decades, many observations documented the occurrence of fore-arc mantle serpentinites in different locations. Here, we present petrology and whole rock chemistry for serpentinized peridotites dredged from the Hahajima Seamount, which is located 20-60 km west of the junction of the Bonin Trench and the Mariana Trench. Combined with published geochemical data of serpentinites from the Torishima Seamount, Conical Seamount and South Chamorro Seamount in the Izu-Bonin-Mariana fore-arc region, it will allow us to better understand the average composition of serpentinized fore-arc mantle overlying the subducting slab and the role of serpentinized mantle playing in the subduction zone geochemical cycle. The studied ultramafic rocks from the Hahajima Seamount are extensively serpentinized and hydrated (73 to 83%), with loss of ignition values ranging between 13 and 15 wt.%. Our results show that the serpentinized peridotites have Mg number from 88 to 90, and the average MgO/SiO2 is 0.93. The average Al2O3 (0.48 wt.%) and CaO (0.23 wt.%) contents are very low, consistent with low clinopyroxene abundances, and the overall depleted character of the mantle harzburgite protoliths. The serpentinized peridotites from the Hahajima Seamount exhibit similar "U" shape rare earth element (REE) patterns ([La/Sm]N = 3.1-3.6), at higher overall abundances, to the Conical and South Chamorro Seamount suites. One exceptional sample shows the similar REE pattern as serpentinized peridotites from the Torishima Seamount, with depleted light REE concentration ([La/Sm]N =0.7). All the serpentinized peridotites from these four fore-arc seamounts show strong enrichment in fluid-mobile and lithophile elements (U, Pb, Sr and Li). The geochemical signature of the serpentinized peridotites from the seamounts in the Izu-Bonin-Mariana fore-arc region could be interpreted as the result of the combination of extensive partial melting and subsequent percolation of sediment-derived fluids through the mantle wedge [1]. References: [1] Deschamps et al. (2013), Lithos, 178, 96-127.

Constraining the Fore-Arc Flux Along the Central America Margin

NASA Astrophysics Data System (ADS)

Hilton, D. R.; Barry, P. H.; Ramirez, C. J.; Kulongoski, J. T.; Patel, B. S.; Blackmon, K.

2014-12-01

The transport of carbon to the deep mantle via subduction zones is interrupted by outputs via the fore-arc, volcanic front, and back-arc regions. Whereas output fluxes for the front and back-arc locales are well constrained for Central America (CA) [1], the fore-arc flux via cold seeps and groundwaters is virtually unknown. We present new He and CO2 data for the inner fore-arc of Costa Rica and western Panama to complement our study [2] of offshore CO2fluxes on the outer-forearc. On the Nicoya Peninsula, the Costa Rica Pacific coastline (including the Oso Peninsula) and the Talamanca Mountain Range, as well as coastal seeps in Panama, coupled CO2-He studies allow recognition of mantle (3He/4He up to 6RA) and crustal inputs to the volatile inventory. We associate the crustal component with CO2 derived from limestone (L) and organic sediments (S) on the subducting slab, and see a decrease in the L/S ratio trench-ward with the lowest values akin to those of diatomaceous ooze in the uppermost sequence of the subducting sediment package. This observation is consistent with the removal of the uppermost organic-rich sediment from deep subduction by under-plating. As the input carbon fluxes of the individual sedimentary layers are well constrained [3], we can limit the potential steady-state flux of carbon loss at the subaerial fore-arc to ~ 6 × 107 gCkm-1yr-1, equivalent to ~88% of the input flux of C associated with the ooze, or <4% of the total incoming sedimentary C. This study confirms that the greatest loss of slab-derived carbon at the CA margin occurs at the volcanic front with recycling efficiencies between 12% (Costa Rica) and 29% (El Salvador) of the sedimentary input [1]. It also demonstrates the utility of the coupled He-CO2approach for mass balance studies at subduction zones. [1] De Leeuw et al., EPSL, 2007; [2] Furi et al., G-cubed, 2010; [3] Li and Bebout, JGR, 2005.

Geochemistry and geochronology of the Mesozoic Lanong ophiolitic mélange, northern Tibet: Implications for petrogenesis and tectonic evolution

NASA Astrophysics Data System (ADS)

Zhong, Yun; Liu, Wei-Liang; Xia, Bin; Liu, Jing-Nan; Guan, Yao; Yin, Zhen-Xing; Huang, Qiang-Tai

2017-11-01

The Lanong ophiolitic mélange is a typical ophiolitic mélange in the middle section of the Bangong-Nujiang suture zone in northern Tibet. It mainly consists of ultramafic and mafic rocks, and its tectonic setting and formation age remain poorly constrained. In this paper, new geochemical and LA-ICP-MS (laser ablation-inductively coupled plasma mass spectrometer) zircon U-Pb age data obtained from gabbro, gabbro-dolerite, dolerite and basalt of the Lanong ophiolitic mélange are provided. The pillow basalts exhibit N-MORB (normal mid-ocean ridge basalt)-like geochemical features with a zircon U-Pb age of 147.6 ± 2.3 Ma. They were generated by 20-30% partial melting of a depleted mantle source composed of spinel lherzolite. The gabbro, massive basalt and gabbro-dolerite samples are characterised by more depleted and "V"-shaped REE (rare earth element) patterns, and they exhibit variable degrees of boninite-like geochemical characteristics, with a zircon U-Pb age of 149.1 ± 1.2 Ma (gabbro-dolerite). They were derived from the remelting of a significantly refractory mantle source following one or more episodes of previous basaltic melt extraction. Geochemical data of these mafic rocks indicate that they were developed in a continental fore-arc setting, and magmas were derived from depleted mantle sources modified by subducted slab-derived fluids and melts with minor crustal contamination. On the other hand, the dolerites show distinct OIB (oceanic island basalt)-like geochemical features, with a zircon U-Pb age of 244.1 ± 3.0 Ma. They were formed in a rift setting on a continental shelf-slope and originated from a low degree of partial melting of a depleted asthenospheric magma source mixed with some ancient sub-continental lithospheric mantle materials. The signatures presented here, combined with the results of previous studies, suggest that the Lanong ophiolitic mélange probably developed in a convergent plate margin under the southward subduction of the Bangong-Nujiang Tethys Ocean beneath the Lhasa terrane during the Middle Triassic-Early Cretaceous. Namely, the OIB-like dolerites likely reflect an extensional rift setting featuring thin continental crust in the Middle Triassic, and the gabbros, gabbro-dolerites and basalts represent a later stage of a fore-arc basin during the Late Jurassic-Early Cretaceous.

Origin of back-arc basins and effects of western Pacific subduction systems on eastern China geology

NASA Astrophysics Data System (ADS)

Niu, Y.

2013-12-01

Assuming that subduction initiation is a consequence of lateral compositional buoyancy contrast within the lithosphere [1], and recognizing that subduction initiation within normal oceanic lithosphere is unlikely [1], we can assert that passive continental margins that are locations of the largest compositional buoyancy contrast within the lithosphere are the loci of future subduction zones [1]. We hypothesize that western Pacific back-arc basins were developed as and evolved from rifting at passive continental margins in response to initiation and continuation of subduction zones. This hypothesis can be tested by demonstrating that intra-oceanic island arcs must have basement of continental origin. The geology of the Islands of Japan supports this. The highly depleted forearc peridotites (sub-continental lithosphere material) from Tonga and Mariana offer independent lines of evidence for the hypothesis [1]. The origin and evolution of the Okinawa Trough (back-arc basin) and Ryukyu Arc/Trench systems represents the modern example of subduction initiation and back-arc basin formation along a (Chinese) continental margin. The observation why back-arc basins exit behind some subduction zones (e.g., western Pacific) but not others (e.g., in South America) depends on how the overlying plate responds to subduction, slab-rollback and trench retreat. In the western Pacific, trench retreat towards east results in the development of extension in the upper Eurasian plate and formation of back-arc basins. In the case of South America, where no back-arc basins form because trench retreat related extension is focused at the 'weakest' South Mid-Atlantic Ridge. It is thus conceptually correct that the South Atlantic is equivalent to a huge 'back-arc basin' although its origin may be different. Given the negative Clayperon slope of the Perovskite-ringwoodite phase transition at the 660 km mantle seismic discontinuity (660-D), slab penetration across the 660-D is difficult and trench retreat in the western Pacific readily result in the horizontal stagnation of the Pacific plate in the transition zone beneath eastern Asian continent [2]. Dehydration of this slab supplies water, which rises and results in 'basal hydration weakening' of the eastern China lithosphere and its thinning by converting it into weak material of asthenospheric property [3]. We note the proposal that multiple subduction zones with more water (i.e., subduction of the South China Block beneath the North China Craton, NCC; subduction of the Siberian/Mongolian block beneath the NCC) all contribute to the lithosphere thinning beneath the NCC [4]. However, 'South China-NCC' and 'Siberian/Mongolian-NCC' represent two collisional tectonics involving no trench retreat, causing no transition-zone slab stagnation, supplying no water, and thus contributing little to lithosphere thinning beneath the NCC. Furthermore, lithosphere thinning happened to the entire eastern China, not just limited to the NCC, emphasizing the effects of the western Pacific subduction system on eastern China geology. References: [1] Niu et al., 2003, Journal of Petrology, 44, 851-866. [2] Kárason & van der Hilst, R., 2000, Geophysical Monograph, 121, 277-288. [3] Niu, 2005, Geological Journal of China Universities, 11, 9-46. [4] Windley et al., 2010, American Journal of Science, 310, 1250-1293.

Geologic map of the Lacamas Creek quadrangle, Clark County, Washington

USGS Publications Warehouse

Evarts, R.C.

2006-01-01

The Lacamas Creek 7.5 minute quadrangle is in southwestern Washington, approximately 25 km northeast of Portland, Oregon, along the eastern margin of the Portland Basin, which is part of the Puget-Willamette Lowland that separates the Cascade Range from the Oregon Coast Range. Since late Eocene time, the Cascade Range has been the locus of an episodically active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. Lava flows that erupted early in the history of the arc underlie the eastern half of the Lacamas Creek quadrangle, forming a dissected terrain, with elevations as high as 2050 ft (625 m), that slopes irregularly but steeply to the southwest. These basalt and basaltic andesite flows erupted in early Oligocene time from one or more vents located outside the map area. The flows dip gently (less than 5 degrees) west to southwest. In the western part of the map area, volcanic bedrock is unconformably overlain by middle Miocene to early Pleistocene(?) sediments that accumulated as the Portland Basin subsided. These sediments consist mostly of detritus carried into the Portland Basin by the ancestral Columbia River. Northwest-striking faults offset the Paleogene basin floor as well as the lower part of the basin fill. In middle Pleistocene time, basalt and basaltic andesite erupted from three small volcanoes in the southern half of the map area. These vents are in the northern part of the Boring volcanic field, which comprises several dozen late Pliocene and younger monogenetic volcanoes scattered throughout the greater Portland region. In latest Pleistocene time, the Missoula floods of glacial-outburst origin inundated the Portland Basin. The floods deposited poorly sorted gravels in the southwestern part of the Lacamas Creek quadrangle that grade northward into finer grained sediments. This map is a contribution to a program designed to improve geologic knowledge of the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. More detailed information on the bedrock and surficial geology of the basin and its surrounding area is necessary to refine assessments of seismic risk, ground-failure hazards and resource availability in this rapidly growing region.

IODP Expedition 352 (Bonin Forearc): First Results

NASA Astrophysics Data System (ADS)

Pearce, J. A.; Reagan, M. K.; Stern, R. J.; Petronotis, K. E.

2014-12-01

IODP Expedition #352 (Testing Subduction Initiation and Ophiolite Models by Drilling the Outer Izu-Bonin-Mariana Forearc: July 30-Sept. 29, 2014) is just underway at the time of writing. It is testing the Stern-Bloomer hypothesis that subduction initiation (SI) was followed by a strongly extensional period of slab sinking and trench roll-back and then by a transitional period leading to the establishment of significant slab-parallel plate motion and hence normal subduction. The Expedition aims to carry out offset drilling at two sites near 28°30'N in the Bonin forearc. Ideally, these together will give the vertical volcanic stratigraphy needed to trace the geodynamic and petrogenetic processes associated with SI, and provide the complete reference section required for comparison with volcanic sequences of possible SI origin found on land in ophiolite complexes and elsewhere. We predict, but need to confirm, a c. 1.0-1.5km sequence with basal, MORB-like forearc basalts (known as FAB) marking the initial period of extension, boninites characterizing the transitional period, and tholeiitic and calc-alkaline lavas marking the establishment of normal arc volcanism. Study of such a sequence will enable us to understand the chemical gradients within and across these volcanic units, to reconstruct mantle flow and melting processes during the course of SI, and to test the hypothesis that fore-arc lithosphere created during SI is the birthplace of most supra-subduction zone ophiolites. Here, we present the first Expedition results, including (a) the volcanic stratigraphic record and subdivision into lava units, (b) the classifications and interpretations made possible by shipboard (portable XRF and ICP) analyses and down-hole measurements, and (c) the biostratigraphic, magnetic, mineralogical, sedimentary and structural constraints on the geological history of the SI section and the interactions between magmatic, hydrothermal and tectonic activity during its evolution.

Experimental constraints on the serpentinization rate of fore-arc peridotites: Implications for the upwelling condition of the slab-derived fluid

NASA Astrophysics Data System (ADS)

Nakatani, T.; Nakamura, M.

2016-08-01

To constrain the water circulation in subduction zones, the hydration rates of peridotites were investigated experimentally in fore-arc mantle conditions. Experiments were conducted at 400-580°C and 1.3 and 1.8 GPa, where antigorite is expected to form as a stable serpentine phase. Crushed powders of olivine ± orthopyroxene and orthopyroxene + clinopyroxene were reacted with 15 wt % distilled water for 4-19 days. The synthesized serpentine varieties were lizardite and aluminous lizardite (Al-lizardite) in all experimental conditions except those of 1.8 GPa and 580°C in the olivine + orthopyroxene system, in which antigorite was formed. In the olivine + orthopyroxene system, the reactions were interface-controlled except for the reaction at 400°C, which was transport-controlled. The corresponding reaction rates were 7.0 × 10-12 to 1.5 × 10-11 m s-1 at 500-580°C and 7.5 × 10-16 m2 s-1 at 400°C for the interface and transport-controlled reactions, respectively. Based on a simple reaction-transport model including these hydration rates, we infer that penetration of the slab-derived fluid all the way through a water-unsaturated fore-arc mantle is allowed only when focused flow occurs with a spacing larger than 77-229 km in hot subduction zones such as Nankai and Cascadia. However, the necessary spacing is only 2.3-4.6 m in intermediate-temperature subduction zones such as Kyushu and Costa Rica. These calculations imply that fluid leakage in hot subduction zones may occur after the fore-arc mantle is totally hydrated, whereas in intermediate-temperature subduction zones, leakage through a water-unsaturated fore-arc mantle may be facilitated.

Locking, mass flux and topographic response at convergent plate boundaries - the Chilean case

NASA Astrophysics Data System (ADS)

Oncken, Onno

2016-04-01

On the long term, convergent plate boundaries have been shown to be controlled by either accretion/underplating or by subduction erosion. Vertical surface motion is coupled to convergence rate - typically with an uplift rate of the coastal area ranging from 0 to +50% of convergence rate in accretive systems, and -20 to +30% in erosive systems. Vertical kinematics, however, are not necessarily linked to horizontal strain mode, i.e. upper plate shortening or extension, in a simple way. This range of kinematic behaviors - as well as their acceleration where forearcs collide with oceanic ridges/plateau - is well expressed along the Chilean plate margin. Towards the short end of the time scale, deformation appears to exhibit a close correlation with the frictional properties and geodetic locking at the plate interface. Corroborating analogue experiments of strain accumulation during multiple earthquake cycles, forearc deformation and uplift focus above the downdip and updip end of seismic coupling and slip and are each related to a particular stage of the seismic cycle, but with opposite trends for both domains. Similarly, barriers separating locked domains along strike appear to accumulate most upper plate faulting interseismically. Hence, locking patters are reflected in topography. From the long-term memory contained in the forearc topography the relief of the Chilean forearc seems to reflect long term stability of the observed heterogeneity of locking at the plate interface. This has fundamental implications for spatial and temporal distribution of seismic hazard. Finally, the nature of locking at the plate interface controlling the above kinematic behavior appears to be strongly controlled by the degree of fluid overpressuring at the plate interface suggesting that the hydraulic system at the interface takes a key role for the forearc response.

Deformation across the forearc of the Cascadia subduction zone at Cape Blanco, Oregon

USGS Publications Warehouse

Savage, J.C.; Svarc, J.L.; Prescott, W.H.; Murray, M.H.

2000-01-01

Over the interval 1992-1999 the U.S. Geological Survey measured the deformation of a geodetic array extending N880°E (approximate direction of plate convergence) from Cape Blanco on the Oregon coast to the volcanic arc near Newberry Crater (55 and 350 km, respectively, from the deformation front). Within about 150 km from the deformation front, the forearc is being compressed arcward (N80°E) by coupling to the subducting Juan de Fuca plate. Dislocation modeling of the observed N80°E compression suggests that the main thrust zone (the locked portion of the Juan de Fuca-forearc interface) is about 40 km wide in the downdip direction. The transverse (N10°W) velocity component of the forearc measured with respect to the fixed interior of North America decreases with distance from the deformation front at a rate of about 0.03 mm yr-1 km-1. That gradient appears to be a consequence of rigid rotation of the forearc block relative to fixed interior North America (Euler vector of 43.4°±0.1° N, 120.0°±0.4° W, and -1.67±0.17° (m.y.)-1; quoted uncertainties are standard deviations). The rotation rate is similar to the paleomagnetically measured rotation rate (-1.0±0.2° (m.y.)-1) of the 15 Ma lava flows along the Columbia River 250 km farther north. The back arc does not appear to participate in this rotation but rather is migrating at a rate of about 3.6 mm yr-1northward with respect to fixed North America. That migration could be partly an artifact of an imperfect tie of our reference coordinate system to the interior of North America.

Evidence for subduction-related magmatism during the Cretaceous and Cenozoic in Myanmar

NASA Astrophysics Data System (ADS)

Sevastjanova, Inga; Sagi, David Adam; Webb, Peter; Masterton, Sheona; Hill, Catherine; Davies, Clare

2017-04-01

Myanmar's complex geological history, numerous controversies around its tectonic evolution and the presence of prospective hydrocarbon basins make it a key area of interest for geologists. Understanding whether a passive or an active margin existed in the region during the Cenozoic is particularly important for the production of accurate basin models; active Cenozoic subduction would imply that hydrocarbon basins in the forearc experienced extension due to slab rollback. The geology of Myanmar was influenced by the regional tectonics associated with the Cretaceous and Cenozoic closure of the Neotethys Ocean. During this time, India travelled rapidly from Gondwana to Asia at speeds up to 20 cm/yr. To accommodate the north-eastward motion of India, the Neotethys Ocean was consumed at the subduction zone along the southern margin of Eurasia. Based on our Global Plate Model, this subduction zone can reasonably be expected to extend for the entire width of the Neotethys Ocean as far as Myanmar and Southeast Asia at their eastern extent. Moreover, a) Cretaceous volcanism onshore Myanmar, b) the middle Cenozoic arc-related extension in the Present Day eastern Andaman Sea and c) the late Cenozoic uplift of the Indo-Burman Ranges are all contemporaneous with the subduction ages predicted by the global plate motions. However, because of the geological complexity of the area, additional evidence would augment interpretations that are based on structural data. In an attempt to reduce the uncertainty in the existing interpretations, we have compiled published zircon geochronological data from detrital and igneous rocks in the region. We have used published zircon U-Pb ages and, where available, published Hf isotope data and CL images (core/rim) in order to distinguish 'juvenile' mantle-derived zircons from those of reworked crustal origin. The compilation shows that Upper Cretaceous and Cenozoic zircons, which are interpreted to have a volcanic provenance, are common across the Wuntho-Popa Arc and in the sedimentary basins onshore Myanmar (including the onshore Rakhine Basin and the Myanmar Central Basin), providing evidence for ongoing, although non-continuous, subduction in the region.

On the feedback between forearc morphotectonics and megathrust earthquakes in subduction zones

NASA Astrophysics Data System (ADS)

Rosenau, M.; Oncken, O.

2008-12-01

An increasing number of observations suggest an intrinsic relationship between short- and long-term deformation processes in subduction zones. These include the global correlation between megathrust earthquake slip patterns with morphotectonic forearc features, the historical predominance of giant earthquakes (M > 9) along accretionary margins and the occurrence of (slow and shallow) tsunami earthquakes along erosive margins. To gain insight into the interplay between seismogenesis and tectonics in subduction settings we have developed a new modeling technique which joins analog and elastic dislocation approaches. Using elastoplastic wedges overlying a rate- and state-dependent interface, we demonstrate how analog earthquakes drive permanent wedge deformation consistent with the dynamic Coulomb wedge theory and how wedge deformation in turn controls basal "seismicity". During an experimental run, elastoplastic wedges evolve from those comparable to accretionary margins, characterized by plastic wedge shortening, to those mimicking erosive margins, characterized by minor plastic deformation. Permanent shortening localizes at the periphery of the "seismogenic" zone leading to a "morphotectonic" segmentation of the upper plate. Along with the evolving segmentation of the wedge, the magnitude- frequency relationship and recurrence distribution of analog earthquakes develop towards more periodic events of similar size (i.e. characteristic earthquakes). From the experiments we infer a positive feedback between short- and long-term deformation processes which tends to stabilize the spatiotemporal patterns of elastoplastic deformation in subduction settings. We suggest (1) that forearc anatomy reflects the distribution of seismic and aseismic slip at depth, (2) that morphotectonic segmentation assists the occurrence of more characteristic earthquakes, (3) that postseismic near-trench shortening relaxes coseismic compression by megathrust earthquakes and thus reduces tsunami earthquake risk in accretionary settings and (4) that permanent coastal shortening allows adjacent segments to fail more synchronized thus triggering much greater earthquakes in accretionary settings.

Water Release from Cold Serpentinized Forearc Mantle During Subduction Associated with Changes in Incoming Oceanic Plate Thermal Structure and Plate Boundary Kinematics: New Insights into Serpentinite Belts and Plate-Boundary Rheology

NASA Astrophysics Data System (ADS)

Kirby, Stephen

2016-04-01

Kirby, Wang, and Brocher (Earth Planets and Space, 2014) recently showed how the change in kinematics of the California margin from subduction motion to continental transform motion with the birth and growth of the San Andreas Fault System (SAFS) beginning at about 33 Ma BP likely led to a warming of the former forearc mantle and the release of water from serpentinized mantle by dehydration and a likely increase in fluid pressures along the SAFS. Such a mantle source of pressurized water gives insights into both the low sliding resistance for the SAFS and the mobilization and ascent of some serpentinized mantle peridotites through the crust. Thermal modeling by others has also shown that changes in the incoming plate age and subduction rate can also lead to warming of the forearc mantle during subduction. This development gives insights into the Mesozoic and Paleogene ages of emplacement of some, but not all, California serpentinites. Recent mineralogical and geochemical observations of serpentinite blocks in serpentinize mélange bodies in the San Francisco Bay Area (Uno and Kirby, 2014 AGU Meeting and Lewis and Kirby, 2015 AGU Meeting) suggest that these rocks sustained multiple stages of serpentinization that are broadly consistent with the model of Kirby et al. (2014). A new development comes from interpretation of investigations in the literature of localized late-stage silica-carbonate-water alteration of serpentinite bodies in California that this alteration occurred largely in Neogene time when the highest rates of water release from the former forearc mantle probably occurred. This presentation also suggests that the occurrence of serpentinite belts emplaced in Cenozoic time during changing plate-boundary kinematics, such as the Cenozoic closing of the Tethys Ocean bordering Eurasia by subduction and collision and arc reversal and decreasing convergence rates under the Greater Antilles and Colombia and New Guinea, may give insights into the serpentinite belts in those regions. The weak rheological behavior of present collisional plate boundaries under high fluid pressures from the mantle also provides possible explanations of the mobility of "tectonic escape" strike-slip faulting in Turkey, Syria, and SE Asia following subduction.

Arc segmentation and seismicity in the Solomon Islands arc, SW Pacific

NASA Astrophysics Data System (ADS)

Chen, Ming-Chu; Frohlich, Cliff; Taylor, Frederick W.; Burr, George; van Ufford, Andrew Quarles

2011-07-01

This paper evaluates neotectonic segmentation in the Solomon Islands forearc, and considers how it relates to regional tectonic evolution and the extent of ruptures of large megathrust earthquakes. We first consider regional geomorphology and Quaternary vertical displacements, especially uplifted coral reef terraces. Then we consider geographic seismicity patterns, aftershock areas and vertical displacements for large earthquakes, focal mechanisms, and along-arc variations in seismic moment release to evaluate the relationship between neotectonically defined segments and seismicity. Notably, one major limitation of using seismicity to evaluate arc segmentation is the matter of accurately defining earthquake rupture zones. For example, shoreline uplifts associated with the 1 April 2007 M w 8.1 Western Solomons earthquake indicate that the along-arc extent of rupture was about 50 km smaller than the aftershock area. Thus if we had relied on aftershocks alone to identify the 2007 rupture zone, as we do for most historical earthquakes, we would have missed the rupture's relationship to a major morphologic feature. In many cases, the imprecision of defining rupture zones without surface deformation data may be largely responsible for the poor mismatches to neotectonic boundaries. However, when a precise paleoseismic vertical deformation history is absent, aftershocks are often the best available tool for inferring rupture geometries. Altogether we identify 16 segments in the Solomon Islands. These comprise three major tectonic regimes or supersegments that correspond respectively to the forearc areas of Guadalcanal-Makira, the New Georgia island group, and Bougainville Islands. Subduction of the young and relatively shallow and buoyant Woodlark Basin and spreading system distinguishes the central New Georgia supersegment from the two neighboring supersegments. The physiographic expression of the San Cristobal trench is largely absent, but bathymetric mapping of the surface trace of the interplate thrust zone defines it adequately. The New Georgia supersegment has smaller arc segments, and more islands due to general late Quaternary forearc uplift very close to the trench where vertical displacement rates tend to be faster; prior to the 2007 earthquake it had much lower rates of seismic activity than the neighboring supersegments. Generally the mean along-arc lateral extent of Solomon arc segments is about 75 km, somewhat smaller than the segments reported in some other island arcs such as Japan (~ 100-260 km), but larger than those of the Tonga (30-80 km) and Central New Hebrides arcs (30-110 km). These differences may be real but it may occur simply because the coral-friendly tropical environment of the South Pacific arcs, numerous emerged forearc islands, and high seismicity rates provide an unusually favorable situation for observing variations in vertical tectonic activity and thus for identifying segment boundaries. Over the past century seismic slip in the Solomons, as indicated by seismic moment release, has corresponded to about half the plate convergence rate; however, there are notable variations along the arc. Even with the 2007 earthquake, the long-term moment release rate in the New Georgia supersegment is relatively low, and this may indicate that large earthquakes are imminent.

Tectonics of formation, translation, and dispersal of the Coast Range ophiolite of California

USGS Publications Warehouse

McLaughlin, R.J.; Blake, M.C.; Griscom, A.; Blome, C.D.; Murchey, B.

1988-01-01

Data from the Coast Range ophiolite and its tectonic outliers in the northern California Coast Ranges suggest that the lower part of the ophiolite formed 169 to 163 Ma in a forearc or back arc setting at equatorial latitudes. Beginning about 156 Ma and continuing until 145 Ma, arc magmatism was superimposed on the ophiolite, and concurrently, a transform developed along the arc axis or in the back arc area. Rapid northward translation of this rifted active magmatic arc to middle latitudes culminated in its accretion to the California margin of North America at about 145 Ma. This Late Jurassic episode of translation, arc magmatism, and accretion coincided with the Nevadan orogeny and a proposed major plate reorganization in the eastern Pacific basin. Displacement occurred between about 60 and 52 Ma. Ophiolitic rocks in the Decatur terrane of western Washington that have recently been correlated with the Coast Range ophiolite and the Great Valley sequence of California were apparently displaced at least 950 to 1200 km from the west side of the Great Valley between early Tertiary and Early Cretaceous time. Derived rates of northward translation for the ophiolite outliers in California are in the range of 1 to 4 cm/yr. -from Authors

Evidence for shallow dehydration of the subducting plate beneath the Mariana forearc: New insights into the water cycle at subduction zones

NASA Astrophysics Data System (ADS)

Ribeiro, J.; Stern, R. J.; Kelley, K. A.; Shaw, A. M.; Martinez, F.; Ohara, Y.

2014-12-01

Water is efficiently recycled at subduction zones. It is fluxed from the surface into the mantle by the subducted plate and back to the surface or crust through explosive arc volcanism and degassing. Fluids released from dehydrating the subducting plate are transfer agents of water. Geophysical modeling [1] and the geochemistry of arc glasses [2] suggest that at cold-slab subduction zones, such as the Mariana convergent margin, the downgoing plate mostly dehydrates beneath the volcanic arc front (≥ ~ 80 -100 km depth to slab) to trigger volcanism. However, there is a gap in our understanding of the water fluxes released beneath forearcs, as examples of forearc magmatism are extremely rare. Here, we investigate the Southernmost Mariana Forearc Rift (SEMFR), where MORB-like spreading occurred unusually close to the trench, sampling slab-derived aqueous fluids released at ~ 30 to 100 km depth from the subducted plate. Examining the trace element and water contents of olivine-hosted melt inclusions and glassy rinds from the young (2 - 4 Ma) and fresh SEMFR pillowed basalts provide new insights into the global water cycle. SEMFR lavas contain ~2 wt % H2O, and the olivine-hosted melt inclusions have the highest subduction-related H2O/Ce ratios (H2O/Ce = 6000 - 19000) ever recorded in arc magmas (H2O/Ce < 10600 and global averaged H2O/Ce < 3000). Our findings show that (i) slab-derived fluids released beneath forearcs are water-rich compared to the deeper fluids released beneath the arc system; and (ii) cold downgoing plates lose most of their water at shallow depths (~ 70 - 80 km slab depth), suggesting that water is efficiently recycled beneath the forearc (≥ 90%). 1. Van Keken, P.E., et al., Subduction factory: 4. Depth-dependent flux of H2O from subducting slabs worldwide. Journal of Geophysical Research: Solid Earth, 2011. 116(B1): p. B01401, DOI: 10.1029/2010jb007922. 2. Ruscitto, D.M., et al., Global variations in H2O/Ce: 2. Relationships to arc magma geochemistry and volatile fluxes. Geochemistry Geophysics Geosystems, 2012. 13(3): p. Q03025, DOI: 10.1029/2011gc003887.

A Polygenetic Origin for some Oceanic Lithosphere: Evidence from Forearc, Continental Margin and Ophiolite Mantle Sequences

NASA Astrophysics Data System (ADS)

Pearce, J. A.; Parkinson, I. J.

2003-12-01

It is a common assumption that ophiolites and oceanic lithosphere attain their structures and compositions through partial melting of mantle in a single tectonic setting and with a simple petrogenetic relationship between all the units. There is, however, growing evidence that some oceanic lithosphere and ophiolite complexes contain a record of a polygenetic history of formation. This may be apparent in crustal units (complex lava stratigraphies or cross-cutting dykes and gabbros) but the best evidence is recorded in the chrome spinel compositions of residual mantle. Among the most effective plots is that of oxygen fugacity, calculated from accurately-determined ferric iron concentrations, against Cr-number. In the ocean basins, forearc peridotites from the Izu-Bonin Mariana, Tonga and South Sandwich systems may be of two types. In the first, both peridotites and dunites have similar oxygen fugacities and a small range in Cr-number. We interpret these as mongenetic. In the second, the peridotites have low oxygen fugacities and moderate Cr-number and trend towards dunites with high oxygen fugacities and high Cr-number. We interpret these as representing mid-ocean ridge mantle lithosphere, which existed prior to a subduction event and was subsequently invaded by subduction-related melts. The time-gap between the ridge and subduction events may be millions of years or, in the case of subduction initiation, represent a continuum. At passive continental margins, such as the Galicia margin, the origin may again be monogenetic or polygenetic. In the latter case, the mantle peridotites may exhibit a trend from low Cr-number to moderate Cr-number and decreasing oxygen fugacity. We interpret these as representing orogenic peridotite uplifted during an amagmatic extensional event and invaded by MORB magma during subsequent spreading. As with forearc peridotites, the time gap between these two events may be large or there be a continuum. A surprising number of ophiolites exhibit this polygenetic character, especially those which may be linked to subduction initiation (such as the northern Semail ophiolite, Pindos, Zambales) or to ocean opening (e.g. Western Mediterranean ophiolites, Othris, Lizard). And even in essentially monogenetic ophiolites, such as the Troodos Massif, there are subtle variations that may be related to ridge jumps or other local processes. These observations raise questions over the extent to which oceanic lithosphere really is the product of 100% extension or whether it may sometimes contain relics of a more complex history.

Geologic map and database of the Roseburg 30' x 60' quadrangle, Douglas and Coos counties, Oregon

USGS Publications Warehouse

Wells, Ray E.; Jayko, A.S.; Niem, A.R.; Black, G.; Wiley, T.; Baldwin, E.; Molenaar, K.M.; Wheeler, K.L.; DuRoss, C.B.; Givler, R.W.

2001-01-01

The Roseburg 30' x 60' Quadrangle covers the southeastern margin of the Oregon Coast Range and its tectonic boundary with Mesozoic terranes of the Klamath Mountains (see figures 1 and 2 in pamphlet, also shown on map sheet). The geologic framework of the Roseburg area was established by the pioneering work of Diller (1898), Wells and Peck, (1961) and Ewart Baldwin (1974) and his students (see figure 3 in pamphlet, also shown on map sheet). Baldwin and his students focussed on the history of the Eocene Tyee basin, where the sediments lap across the tectonic boundary with the Mesozoic terranes and record the accretion of the Coast Range basement to the continent. Others have examined the sedimentary fill of the Tyee basin in detail, recognizing the deep marine turbidite facies of the Tyee Formation (Snavely and others, 1964) and proposing several models for the Eocene evolution of the forearc basin (Heller and Ryberg, 1983; Chan and Dott, 1983; Heller and Dickinson, 1985; Molenaar, 1985; see Ryu and others, 1992 for a comprehensive summary). Along the eastern margin of the quadrangle, both the Tyee basin and the Klamath terranes are overlain by Eocene volcanic rocks of the Western Cascade arc (Walker and MacLeod, 1991). The thick Eocene sedimentary sequence of the Tyee basin has significant oil and gas potential (Armentrout and Suek, 1985; Gautier and others, 1993; Ryu and others, 1996). Although 13 deep test wells have been drilled in the Roseburg quadrangle (see figure 2 and table 1 in pamphlet, also shown on map sheet), exploration to date has been hampered by an incomplete understanding of the basin�s tectonic setting and evolution. In response, the Oregon Department of Geology and Mineral Industries (DOGAMI) initiated a five year assessment of the oil and gas potential of the Tyee basin. This map is a product of a cooperative effort by the U. S. Geological Survey, Oregon State University, and DOGAMI to systematically map the sedimentary facies and structure of the Tyee basin. New geologic mapping of twenty-eight 7.5' quadrangles is summarized on the map (see figure 3, also shown on map sheet), and the digital database contains geologic information suitable for both 1:100K and 1:24K scale analysis. DOGAMI has published a compilation and synthesis of previous mapping (Niem and Niem, 1990), a basin-wide sequence stratigraphic model and correlations (Ryu and others, 1992), and a report on the oil and gas potential (Ryu and others, 1996). Readers interested in the oil and gas potential of the Roseburg quadrangle should use the map in combination with Ryu and others (1996) to address specific stratigraphic units and structural plays. Stratigraphic terminology for the Tyee basin adopts the type sections, formation names, and framework of Ryu and others (1992, 1996), which were developed concurrently with the mapping and are recognized throughout the basin. For detailed discussion of nomenclature, type sections, lithology, thickness and distribution, age, contact relationships, and depositional environment of stratigraphic units, the reader is referred to Ryu and others (1992). In this report we focus on the spatial, temporal, and structural relationships between units revealed by geologic mapping. Map unit ages (see figure 4 in pamphlet, also shown on map sheeet) are adjusted slightly from Ryu and others (1992, 1996) to fit new coccolith age determinations (D. Bukry, cited in pamphlet), paleomagnetic polarity data (Simpson, 1977 and new data cited in pamphlet), and the time scale of Berggren and others (1995).

Provenance and detrital zircon geochronologic evolution of lower Brookian foreland basin deposits of the western Brooks Range, Alaska, and implications for early Brookian tectonism

USGS Publications Warehouse

Moore, Thomas; O'Sullivan, Paul B.; Potter, Christopher J.; Donelick, Raymond A.

2015-01-01

The Upper Jurassic and Lower Cretaceous part of the Brookian sequence of northern Alaska consists of syntectonic deposits shed from the north-directed, early Brookian orogenic belt. We employ sandstone petrography, detrital zircon U-Pb age analysis, and zircon fission-track double-dating methods to investigate these deposits in a succession of thin regional thrust sheets in the western Brooks Range and in the adjacent Colville foreland basin to determine sediment provenance, sedimentary dispersal patterns, and to reconstruct the evolution of the Brookian orogen. The oldest and structurally highest deposits are allochthonous Upper Jurassic volcanic arc–derived sandstones that rest on accreted ophiolitic and/or subduction assemblage mafic igneous rocks. These strata contain a nearly unimodal Late Jurassic zircon population and are interpreted to be a fragment of a forearc basin that was emplaced onto the Brooks Range during arc-continent collision. Synorogenic deposits found at structurally lower levels contain decreasing amounts of ophiolite and arc debris, Jurassic zircons, and increasing amounts of continentally derived sedimentary detritus accompanied by broadly distributed late Paleozoic and Triassic (359–200 Ma), early Paleozoic (542–359 Ma), and Paleoproterozoic (2000–1750 Ma) zircon populations. The zircon populations display fission-track evidence of cooling during the Brookian event and evidence of an earlier episode of cooling in the late Paleozoic and Triassic. Surprisingly, there is little evidence for erosion of the continental basement of Arctic Alaska, its Paleozoic sedimentary cover, or its hinterland metamorphic rocks in early foreland basin strata at any structural and/or stratigraphic level in the western Brooks Range. Detritus from exhumation of these sources did not arrive in the foreland basin until the middle or late Albian in the central part of the Colville Basin.These observations indicate that two primary provenance areas provided detritus to the early Brookian foreland basin of the western Brooks Range: (1) local sources in the oceanic Angayucham terrane, which forms the upper plate of the orogen, and (2) a sedimentary source region outside of northern Alaska. Pre-Jurassic zircons and continental grain types suggest the latter detritus was derived from a thick succession of Triassic turbidites in the Russian Far East that were originally shed from source areas in the Uralian-Taimyr orogen and deposited in the South Anyui Ocean, interpreted here as an early Mesozoic remnant basin. Structural thickening and northward emplacement onto the continental margin of Chukotka during the Brookian structural event are proposed to have led to development of a highland source area located in eastern Chukotka, Wrangel Island, and Herald Arch region. The abundance of detritus from this source area in most of the samples argues that the Colville Basin and ancestral foreland basins were supplied by longitudinal sediment dispersal systems that extended eastward along the Brooks Range orogen and were tectonically recycled into the active foredeep as the thrust front propagated toward the foreland. Movement of clastic sedimentary material from eastern Chukotka, Wrangel Island, and Herald Arch into Brookian foreland basins in northern Alaska confirms the interpretations of previous workers that the Brookian deformational belt extends into the Russian Far East and demonstrates that the Arctic Alaska–Chukotka microplate was a unified geologic entity by the Early Cretaceous.

An oceanic plateau subduction: A case study offshore Eastern Java.

NASA Astrophysics Data System (ADS)

Shulgin, Alexey; Kopp, Heidrun; Mueller, Christian; Planert, Lars; Lueschen, Ewald; Flueh, Ernst; Djajadihardja, Yusuf

2010-05-01

The area offshore Java represents one of a few places globally where the early stage of subduction of an oceanic plateau is observed. Our study area is located south of eastern Java and covers the edge of the Roo Rise plateau, the Java trench and the entire forearc section. For the first time the detailed deep structure of the Roo Rise is studied, subduction of which has a significant effect on the forearc dynamics and evolution and the increase of the geohazards risks. The tsunamogenic earthquakes of 1994 and 2006 are associated with the oceanic plateau edge been subducted. We present integrated results of a refraction/wide-angle reflection tomography, gravity modeling, and multichannel reflection seismic imaging using data acquired in 2006 along a corridor centered around 113°E and composed of a 340 km long N-S profile and a 130 km long E-W oriented profile. The composite structural models reveal the previously unresolved deep geometry of the collision zone and the structure of the oceanic plateau. The crustal thickness of the Roo Rise plateau is ranging from 18 to 12 km. The structure of the upper crust of the incoming oceanic plate shows the extreme degree of fracturing in its top section, and is associated with a plate bending. The forearc Moho has a depth range from 16 to 20 km. The gravity modeling requires a sharp crustal thickness increase below Java. Within our profiles we do not recover any direct evidence for the presence of the bathymetric features on the oceanic plate currently present below the accretionary prism, responsible for the tsunamogenic earthquake triggering. However vertical variations of the forearc basement edge are observed on the trench-parallel profile, which opens a discussion on the origin of such basement undulations, together with a localized patchy uplift character of the forearc high.

Olivine fabrics and tectonic evolution of fore-arc mantles: A natural perspective from the Songshugou dunite and harzburgite in the Qinling orogenic belt, central China

NASA Astrophysics Data System (ADS)

Cao, Yi; Jung, Haemyeong; Song, Shuguang

2017-03-01

To advance our understanding of the deformation characteristics, rheological behaviors, and tectonic evolution of the fore-arc lithospheric mantle, we analyzed mineral fabrics for a large spinel-bearing ultramafic massif in the Songshugou area in the Qinling orogenic belt, central China. In the spinel-poor coarse-grained dunite, stronger A/D-type and weaker C-type-like fabrics were found, whereas the spinel-rich coarse-grained dunite displayed a comparatively stronger B-type-like fabric. These olivine fabrics are high-T fabrics influenced by the presence of melt, in which B and C-type-like fabrics are inferred to be produced by melt-assisted grain boundary sliding during synkinematic high-T melt-rock reactions. In contrast, the spinel-poor porphyroclastic and fine-grained dunites present weak AG and B-type-like fabrics, respectively. Their olivine fabrics (low-T fabrics) are inferred to transform from A/D-type fabric in their coarse-grained counterparts possibly through mylonitization process assisted by low-T fluid-rock reactions, during which strain was accommodated by the fluid-enhanced dislocation slip and/or fluid-assisted grain boundary sliding processes. Combined with the tectonic results of our previous work, the high-T olivine fabrics are probably related to a young and warm fore-arc mantle where intense partial melting and high-T boninitic melt-rock reactions prevalently occurred, whereas the low-T olivine fabrics likely reflect the evolving tectonic settings through the cooling fore-arc mantle to a continental lower crust in a collisional orogeny where low-T fluid-rock reactions were pervasively activated. These low-T olivine fabrics imply that though cold, the fore-arc lithospheric mantle may be locally weak (˜20-30 MPa), allowing ductile deformation to occur at a geologically significant strain rate.

Along-arc variation in water distribution in the upper mantle beneath Kyushu, Japan, as derived from receiver function analyses

NASA Astrophysics Data System (ADS)

Abe, Y.; Ohkura, T.; Hirahara, K.; Shibutani, T.

2013-12-01

The Kyushu district, Japan, under which the Philippine Sea (PHS) plate is subducting in a WNW direction, has several active volcanoes. On the volcanic front in Kyushu, a 110 km long gap in volcanism exists in the central part of Kyushu and volcanic rocks with various degrees of contamination by slab-derived fluid are distributed. To reveal the causes of the gap in volcanism and the chemical properties of volcanic rocks and to understand the process of magma genesis and water transportation, we should reveal along-arc variation in water distribution beneath Kyushu. We investigated the seismic velocity discontinuities in the upper mantle beneath Kyushu, with seismic waveform data from 65 stations of Hi-net, which are established by National Research Institute for Earth Science and Disaster Prevention, and 55 stations of the J-array, which are established by Japan Meteorological Agency, Kyushu University, Kagoshima University and Kyoto University. We used receiver function analyses developed especially for discontinuities with high dipping angles (Abe et al., 2011, GJI). We obtained the geometry and velocity contrasts of the continental Moho, the oceanic Moho, and the upper boundary of the PHS slab. From the geometry of these discontinuities and contrast in S wave velocities, we interpreted that the oceanic crust of the PHS slab has a low S wave velocity and is hydrated to a depth of 70 km beneath south Kyushu, to a depth of 80-90 km beneath central Kyushu, and to a depth of no more than 50 km beneath north Kyushu. We also interpreted that the fore-arc mantle beneath central Kyushu has a low velocity region (Vs < 3.2 km/s) that can contain hydrated materials and free aqueous fluid. Such a low velocity fore-arc mantle does not exist beneath north and south Kyushu. Beneath north Kyushu, the oceanic crust does not appear to convey much water in the mantle wedge. Beneath south Kyushu, water dehydrated from the slab could move to the back-arc side and cause arc volcanism, while it could move to the fore-arc side and cause a gap in volcanism and hydration of the fore-arc mantle materials.

Petrology of forearc basalt-related isotropic gabbros from the Bonin Ridge, Izu-Bonin forearc

NASA Astrophysics Data System (ADS)

Garcia, S. E.; Loocke, M. P.; Snow, J. E.

2017-12-01

The early arc volcanic rocks exposed on the Bonin Ridge (BR), a large forearc massif in the Izu-Bonin arc, have provided us with a natural laboratory for the study of subduction initiation and early arc development. The BR has been the subject of focused sampling by way of dredging, diving, and drilling (IODP EXP352) expeditions which have revealed a composite stratigraphy consisting, from bottom to top, of intercalated peridotites and gabbros, isotropic gabbros, sheeted dykes, and a lava sequence which transitions from forearc basalt (FAB) to more arc-like volcanics up section. Although little has been published regarding the moho-transition zone rocks of the BR in comparison to the volcanic rocks, even less work has been published regarding the isotropic gabbros recovered in close association with FABs. Ishizuka et al. (2011) determined that the isotropic gabbros are compositionally and temporally related to the FABs. We provide the first petrologic characterization, including petrography and electron probe microanalysis, of a suite of FAB-related gabbros recovered by dredge D42 of the 2007 R/V Hakuho Maru KH07-02 dredging cruise. Preliminary petrographic observations of the fourteen thin sections reveal that all of the samples contain variable amounts of relict orthopyroxene and consist of five disseminated oxide gabbros, 5 oxide gabbros, and 2 gabbros. We note that all of the D42 gabbros exhibit strong textural variability akin to the varitextured gabbros described in the dyke-gabbro transition of ophiolites (e.g., MacLeod and Yaouancq, 2000). Geochemical data from this critically understudied horizon have the potential to inform regarding the nature of crustal accretion during subduction initiation and the formation, migration, and evolution of FABs. Further, with many authors comparing the volcanic record and crustal stratigraphy of the BR to ophiolites (e.g., Ishizuka et al., 2014), these data would provide another in situ analogue for comparison with the gabbroic sections of ophiolites. MacLeod, C.J., Yaouancq, G., 2000, Earth and Planetary Science Letters, 176:357-373. Ishizuka, O., et al., 2011, Earth and Planetary Science Letters, 306: 229-240. Ishizuka, O., Tani, K., Reagan, M.K., 2014, Elements, 10:115-120.

Hahajima Seamount: an enigmatic tectonic block at the junction between Izu-Bonin and Mariana Trench

NASA Astrophysics Data System (ADS)

Tokunaga, W.; Fujioka, K.; Yokose, H.

2005-12-01

The Hahajima Seamount located at the junction between Izu-Bonin and Mariana forearc slopes, represents a notable rectangular shape and consists of various kinds of rocks. An elaborated bathymetric swath mapping with geophysical measurements and dredge hauls showed the Hahajima Seamount is cut by two predominating lineaments, NE-SW and NW-SE. These lineaments are of faults based on the topographic cross sections and three-dimensional view (Whale's-eye view). The former lineament is parallel to the transform faults of the Parece Vela Basin in the Philippine Sea whereas the latter is to the nearby transform fault on the subducting Pacific Plate underneath the Izu-Bonin arc-trench system. The rocks obtained from the Hahajima Seamount are ultramafic rocks mostly harzburgite, boninite, basalt, andesite, gabbro breccia and sedimentary rocks, which characterize an island arc and an ocean basin affinities. The gravity measurement and seismic reflection survey offer neither definite gravity anomaly at the seamount nor definite internal structures beneath the seamount. The NW-SE trending fault and small scale serpentine flows were observed during the JAMSTEC submersible Shinkai 2000 dives at the Hahajima Seamount. The rectangular shape, size of seamount, various kinds of rocks and all the geophysical measurements strongly support that the Hahajima Seamount is not a simple serpentine seamount but a tectonic block unlike previously believed that was controlled by various tectonic movements.

Electrical resistivity structure at the North-Central Turkey inferred from three-dimensional magnetotellurics

NASA Astrophysics Data System (ADS)

Özaydın, Sinan; Tank, Sabri Bülent; Karaş, Mustafa

2018-03-01

Magnetotelluric data analyses and three-dimensional modeling techniques were implemented to investigate the crustal electrical structure in the North-Central Turkey, along a 190-km-long profile crossing Çankırı Basin, İzmir-Ankara-Erzincan Suture Zone and Central Pontides. In this area, the segment of the North Anatolian Fault (NAF) shows 280-km-long restraining bend, where it was near the focus of the hazardous 1943 Tosya Earthquake (M: 7.6). Structure around the NAF exhibits resistive characteristics at both sides of the fault reaching to at least 25 km of depth. Fluids below the brittle-ductile transition were not detected which will nucleate earthquakes in the area. This resistive structure implies an asperity zone of the NAF, which was ruptured in 1943. The presence of a fluid-bearing upwelling conductive anomaly in Central Pontides may suggest that beneath the deep brittle crust, there may exists a fluid-enriched conductive forearc region, which may have caused by a prograde source related to paleo-tectonic processes.

Interpretation of a leak-off test conducted near the bottom of the Kumano Forearc Basin strata at IODP Site C0002 in the Nankai accretionary complex, SW Japan

NASA Astrophysics Data System (ADS)

Song, I.; Huepers, A.; Olcott, K. A.; Saffer, D. M.; Dugan, B.; Strasser, M.

2013-12-01

The Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) is a long-term, multi-stage scientific drilling project launched for investigating fault mechanics and seismogenesis along subduction megathrusts. One main key to the mechanics of the plate boundary is understanding the absolute mechanical strength and the in situ stress along the megathrust. As part of efforts to access the Nankai Trough seismogenic zone, the NanTroSEIZE Integrated Ocean Drilling Program (IODP) project began riser-based drilling operations at Site C0002 (Hole C0002F) in 2010 during IODP Expedition 326, with the objective of reaching the plate interface at ~6800 meters below the seafloor (mbsf). The geology in this area is composed of the Kumano Forearc Basin sedimentary strata to ~940 mbsf, underlain by the inner accretionary wedge. IODP Expedition 326 drilled Hole C0002F to 872.5 mbsf, near the bottom of the Kumano Basin, and set a 20-inch casing string to 860.2 mbsf. During IODP Expedition 338 in 2012, the hole was extended to 2005.5 mbsf. At the beginning of the operation, a leak-off test (LOT) was conducted in the interval of 872.5-875.5 mbsf, to define the maximum mud weight for the next stage of logging-while-drilling (LWD). Drilling-out-cement (DOC) at the bottom of the hole prior to the LOT provided a 3-m long, 17-inch diameter open borehole for the LOT. For the LOT, this open hole interval was pressurized with the outer annulus closed by the blow out preventer (BOP) using drilling mud of density of 1100 kg/m3, and mud pressure was measured at the cement pumps. The bottom-hole pressure was calculated by the recorded pressure plus the static pressure of the mud column. The first cycle of pressurization was conducted with injection of drilling mud at 31.8 l/min. However, the leak-off pressure (LOP) was not clearly defined because a large volume of mud was lost. Therefore a second cycle was conducted with a higher drilling mud injection rate (47.7 l /min). The rapid increase in pressure with a lower volume of mud injected during the second cycle suggests that a good mud cake was formed around the borehole wall, possibly due to mud flowing into the formation during the first cycle. In the second cycle, we identify a LOP of ~32.0 MPa from the pressure-volume record, which we interpret as the least principal stress. The total vertical stress given by the integration of bulk density with respect to depth is 35.7 MPa, indicating that the LOP reflects the least horizontal stress. This result can be a solid basis to constrain the in situ state of stress from indirect stress indicators such as wellbore failures at other depths.

Sediment Gravity Flow Deposits Across the Désirade Basin (Lesser Antilles Arc), as Possible Markers of Major Earthquakes

NASA Astrophysics Data System (ADS)

Seibert, C.; Nathalie, F.; Beck, C.; Ratzov, G.; Cattaneo, A.; Moreno, E.; Morena, P.

2017-12-01

The Lesser Antilles arc spreads over 800 km and results from the subduction of American plates below the Caribbean plate, at 2 cm/yr. The earthquake catalog begins in mid-17th century, with only two large reported historical earthquakes: the 1839 Mw8 Martinique and the 1843 Mw8.5 Guadeloupe earthquakes. These estimated magnitudes are however lower than the ones from other subduction areas and the origin of such earthquakes is poorly known and still a matter of debate. The detection of possible megathrust earthquakes and their time-distribution remain a challenge. This study is based on the identification and characterization of co-seismic-turbidites using an approach integrating geophysical data and marine sedimentary archives. A morpho-sedimentary analysis, based on bathymetric, backscatter and chirp data, acquired during the CASEIS cruise in 2016 (doi 10.17600/16001800) and during previous cruises allowed to constrain the sediment transport from the arc towards the forearc basins. We highlighted two distinct areas governed by different transfer modes on the two sides of the arc-perpendicular Désirade normal fault: the northern part, where sediments are transported through canyons on the 20°-steep slope, and the southern part, where all the islands are drained by channels developing on a gentle slope ( 2,5°) from the Quaternary reef platform. Both sides receive sediment from the accretionary prism. Sedimentary processes along the Lesser Antilles arc appear to be driven by both climatic and active tectonic forcings. The 26m-long CAS16-14PC core, was sampled on the Désirade basin which is connected to the shelf by numerous canyons, could contain a mixed sediment record. In addition to shipboard MSCL logging, layering, composition and texture, this core has been investigated through XRF profiles and laser microgranulometry, radiocarbon dating is in process. Preliminary integration of these data and 3,5 kHz seismic profiles suggest possible correlation of thick deposits from sediment gravity flows identified as "turbidites+homogenites" in several core sites. Because of their sedimentological specificities and their widespread distribution, we tentatively interpret them as markers of major earthquakes.

Li and δ 7Li in mudrocks from the British Caledonides: Metamorphism and source influences

NASA Astrophysics Data System (ADS)

Qiu, Lin; Rudnick, Roberta L.; McDonough, William F.; Merriman, Richard J.

2009-12-01

Mudrocks from three lower Paleozoic basins in the British Caledonides (southern Lake District, northern Lake District and Southern Uplands) were investigated to determine the influence of sub-greenschist facies metamorphism on Li and the factors that control Li in fine-grained terrigenous sedimentary rocks. Metamorphic grade, as determined by KI (Kübler index) does not correlate with Li content ([Li]) and δ 7Li, indicating that sub-greenschist facies metamorphism has negligible effect on Li in these rocks. Collectively, the data for all three basins show a negative correlation between [Li] and δ 7Li and a positive correlation between [Li] and the Chemical Index of Alteration (CIA), suggesting that provenance exerts the greatest control on Li in mudrocks. Samples from the northern Lake District, which were deposited in an extensional basin, have homogeneous REE patterns, similar to shale composites (PAAS), the highest CIA, Th/U and [Li] and the lowest δ 7Li and ɛNd, consistent with their derivation from a highly weathered, ancient continental source. By contrast, mudrocks from the Southern Uplands range to the lowest CIA, Th/U and [Li] and have the highest δ 7Li and ɛNd. These samples were deposited in a forearc basin on the southern margin of the Laurentian craton and contain volcanic detritus. Their REE patterns are the most variable, ranging from average shale-like patterns to less LREE-enriched patterns. The compositional heterogeneity within the Southern Uplands mudrocks is consistent with a mixed provenance that includes juvenile crustal materials (lower [Li], ɛNd and Th/U, higher δ 7Li), likely derived from the arc, as well as more highly weathered continental detritus. Mudrocks from the southern Lake District were deposited in a foreland basin, and exhibit geochemical characteristics intermediate between the northern Lake District and the Southern Uplands mudrocks, indicating their derivation from a mixed source. Our study shows that Li concentrations and δ 7Li can provide additional information on the degree of weathering of the provenance of mudrocks.

Morphotectonic Index Analysis as an Indicator of Neotectonic Segmentation of the Nicoya Peninsula, Costa Rica

NASA Astrophysics Data System (ADS)

Morrish, S.; Marshall, J. S.

2013-12-01

The Nicoya Peninsula lies within the Costa Rican forearc where the Cocos plate subducts under the Caribbean plate at ~8.5 cm/yr. Rapid plate convergence produces frequent large earthquakes (~50yr recurrence interval) and pronounced crustal deformation (0.1-2.0m/ky uplift). Seven uplifted segments have been identified in previous studies using broad geomorphic surfaces (Hare & Gardner 1984) and late Quaternary marine terraces (Marshall et al. 2010). These surfaces suggest long term net uplift and segmentation of the peninsula in response to contrasting domains of subducting seafloor (EPR, CNS-1, CNS-2). In this study, newer 10m contour digital topographic data (CENIGA- Terra Project) will be used to characterize and delineate this segmentation using morphotectonic analysis of drainage basins and correlation of fluvial terrace/ geomorphic surface elevations. The peninsula has six primary watersheds which drain into the Pacific Ocean; the Río Andamojo, Río Tabaco, Río Nosara, Río Ora, Río Bongo, and Río Ario which range in area from 200 km2 to 350 km2. The trunk rivers follow major lineaments that define morphotectonic segment boundaries and in turn their drainage basins are bisected by them. Morphometric analysis of the lower (1st and 2nd) order drainage basins will provide insight into segmented tectonic uplift and deformation by comparing values of drainage basin asymmetry, stream length gradient, and hypsometry with respect to margin segmentation and subducting seafloor domain. A general geomorphic analysis will be conducted alongside the morphometric analysis to map previously recognized (Morrish et al. 2010) but poorly characterized late Quaternary fluvial terraces. Stream capture and drainage divide migration are common processes throughout the peninsula in response to the ongoing deformation. Identification and characterization of basin piracy throughout the peninsula will provide insight into the history of landscape evolution in response to differential uplift. Conducting this morphotectonic analysis of the Nicoya Peninsula will provide further constraints on rates of segment uplift, location of segment boundaries, and advance the understanding of the long term deformation of the region in relation to subduction.

Possible emplacement of crustal rocks into the forearc mantle of the Cascadia Subduction Zone

USGS Publications Warehouse

Calvert, A.J.; Fisher, M.A.; Ramachandran, K.; Trehu, A.M.

2003-01-01

Seismic reflection profiles shot across the Cascadia forearc show that a 5-15 km thick band of reflections, previously interpreted as a lower crustal shear zone above the subducting Juan de Fuca plate, extends into the upper mantle of the North American plate, reaching depths of at least 50 km. In the extreme western corner of the mantle wedge, these reflectors occur in rocks with P wave velocities of 6750-7000 ms-1. Elsewhere, the forearc mantle, which is probably partially serpentinized, exhibits velocities of approximately 7500 ms-1. The rocks with velocities of 6750-7000 ms-1 are anomalous with respect to the surrounding mantle, and may represent either: (1) locally high mantle serpentinization, (2) oceanic crust trapped by backstepping of the subduction zone, or (3) rocks from the lower continental crust that have been transported into the uppermost mantle by subduction erosion. The association of subparallel seismic reflectors with these anomalously low velocities favours the tectonic emplacement of crustal rocks. Copyright 2003 by the American Geophysical Union.

On the Relationship of Dynamic Forearc Processes in Southern Peru to the Development and Preservation of Andean Topography

NASA Astrophysics Data System (ADS)

Hall, S. R.; Farber, D. L.; Audin, L.; Saillard, M.; Finkel, R. C.

2008-12-01

After more than 40 years of study, the timing and nature of Andean uplift remains an area of great scientific debate. The forearc of the Andean margin is of particular neotectonic interest, as previous models of Andean orogenesis attributed little-no Neogene deformation to the western margin of Altiplano. However, using the combination of remote sensing with high-resolution data, in situ cosmogenic isotope concentrations and thermochronology, in recent years the community has made important advances in addressing the rates, timings, styles, and locations of active deformation within the forearc of the Andean margin. To first order, we find that - both in terms of tectonics and climate - since 10Ma, the Andean forearc has been quite a dynamic region. Neotectonic studies in this region have been facilitated by the high degree of geomorphic surface preservation that the hyperarid (for at least the last 3My) coastal Atacama Desert has provided. Specifically, in southern Peru (14°-18°S), vast pediment surfaces have been abandoned through incision along the major river drainages that carve the deep canyons into the Precordillera and Western Cordillera. While the exact timing of the periods of more intense incision plausibly correspond with climate events, the total amount of incision integrated over many climate cycles is a useful indicator of tectonic activity. In this region, we find a number of geomorphic and structural features that provide strong evidence for distributed crustal deformation along range-sub-parallel contractile and strike-slip structures. Specifically, we see 1) ancient surfaces reflecting erosion rates as low as <0.1m/Ma, 2) the existence of young (30ka-1Ma) low- relief pediment surfaces due to recent landscape modifications, 3) active structures accommodating compressional, extensional, and shearing stresses 4) a consistent rate of river incision of ~0.3mm/yr along exoreic rivers, 5) spatially and temporally variable uplift rates based on marine terrace chronologies, and 6) Pleistocene mass-wasting events accommodating the redistribution of ~109-1010 m3 of material per event. Furthermore, the observation that Pleistocene incision rates are comparable with Late Miocene and Pliocene rates, suggests to us, that the rates and style of surface uplift within the forearc of southern Peru has been occurring somewhat consistently since at least 10Ma. We suggest, that in this region of southern Peru, the steep western wedge of the Andean margin accommodates the high topography of the Altiplano through a combination of uplift along steeply dipping contractile structures and isostatic responses to the focused removal of large amounts of crustal material in the massive canyons of the Precordillera and Western Cordillera through mass-wasting events and valley incision.

Structural architecture and petrophysical properties of the Rocca di Neto extensional fault zone developed in the shallow marine sediments of the Crotone Basin (Southern Apennines, Italy).

NASA Astrophysics Data System (ADS)

Pizzati, Mattia; Balsamo, Fabrizio; Iacumin, Paola; Swennen, Rudy; Storti, Fabrizio

2017-04-01

In this contribution we describe the architecture and petrophysical properties of the Rocca di Neto extensional fault zone in loose and poorly lithified sediments, located in the Crotone forearc basin (south Italy). To this end, we combined fieldwork with microstructural observations, grain size analysis, and in situ permeability measurements. The studied fault zone has an estimated maximum displacement of 80-90 m and separates early Pleistocene age (Gelasian) sands in the footwall from middle Pleistocene (Calabrian) silty clay in the hangingwall. The analysed outcrop consists of about 70 m section through the fault zone mostly developed in the footwall block. Fault zone consists of four different structural domains characterized by distinctive features: (1) <1 m-thick fault core (where the majority of the displacement is accommodated) in which bedding is transposed into foliation imparted by grain preferential orientation and some black gouges decorate the main slip surfaces; (2) zone of tectonic mixing characterized by a set of closely spaced and anastomosed deformation bands parallel to the main slip surface; (3) about 8 m-thick footwall damage zone characterized by synthetic and antithetic sets of deformation bands; (4) zone of background deformation with a few, widely-spaced conjugate minor faults and deformation bands. The boundary between the relatively undeformed sediments and the damage zone is not sharp and it is characterized by a progressive decrease in deformation intensity. The silty clay in the hangingwall damage zone is characterized by minor faults. Grain size and microstructural data indicate that particulate flow with little amount of cataclasis is the dominant deformation mechanism in both fault core rocks and deformation bands. Permeability of undeformed sediments is about 70000 mD, whereas the permeability in deformation bands ranges from 1000 to 18000 mD; within the fault core rocks permeability is reduced up to 3-4 orders of magnitude respect to the undeformed domains. Structural and petrophysical data suggest that the Rocca di Neto fault zone may compartmentalize the footwall block due to both juxtaposition of clay-rich lithology in the hangingwall and the development of low permeability fault core rocks.

Paleogeography, Paleo-drainage Systems, and Tectonic Reconstructions of Eocene Northern South America Constrained by U-Pb Detrital Zircon Geochronology

NASA Astrophysics Data System (ADS)

Xie, X.; Mann, P.; Escalona, A.

2008-12-01

Thick, Eocene to Miocene clastic sedimentary basins are widespread across on- and offshore northern South America and have been identified using seismic reflection data in offshore basins of the Leeward Antilles, the Lesser Antilles arc and forearc, and the Barbados accretionary prism. Several 3 to12-km-thick Paleogene depocenters occur in shelf to deep basinal settings along the offshore margins of Venezuela, Trinidad and Tobago, and Barbados. Previous studies proposed that the proto-Orinoco River has been the single fluvial source for these distal, continentally-derived sandstone units along northern Venezuela as part of the early Eocene to Miocene, proto-Maracaibo fluvial-deltaic system that emanated from the northern Andes of western Venezuela and Colombia. Those distal sandstones were displaced eastward with the movement of the Caribbean plate by several hundred kilometers and are now found in basins and islands of the southeastern Caribbean region. We collected nine Eocene age sandstone samples from well cores and outcrops along the northern South America margin, including Lake Maracaibo, Trinidad and Tobago, and Barbados Island. In total, 945 single detrital zircon grains were analyzed using LA-ICP-MS. The objective is to reconstruct the paleogeography, paleo-drainage system, and tectonic history during Eocene time. New data show that the Eocene Misoa Formation of Lake Maracaibo was characterized by a mixture of Precambrian, Paleozoic, and Mesozoic ages matching age provinces from eastern Cordillera and the Guayana Shield, which is consistent with previous proto-Orinoco River model flowing from the western Amazonian region of Colombia and Brazil through the Maracaibo basin into the area of western Falcon basin. However, coeval Eocene samples from Barbados and Trinidad show a much different age population dominated by Precambrian matching the eastern part of the Guyana shield to the south, which suggests that the western onland system and eastern offshore units belong to different systems. We postulate that a series of smaller, north-flowing drainages provided a line of sediment source dispersal of Eocene sandstone from the north central and eastern edge of the Guyana shield onto the Eocene passive margin that extended from central Venezuela to Trinidad instead of being tectonically transported to their present locations suggested by earlier studies.

Long-term and Short-term Vertical Deformation Rates across the Forearc in the Central Mexican Subduction Zone

NASA Astrophysics Data System (ADS)

Ramirez-Herrera, M. T.; Gaidzik, K.; Forman, S. L.; Kostoglodov, V.; Burgmann, R.

2015-12-01

Spatial scales of the earthquake cycle, from rapid deformation associated with earthquake rupture to slow deformation associated with interseismic and transient slow-slip behavior, span from fractions of a meter to thousands of kilometers (plate boundaries). Similarly, temporal scales range from seconds during an earthquake rupture to thousands of years of strain accumulation between earthquakes. The complexity of the multiple physical processes operating over this vast range of scales and the limited coverage of observations leads most scientists to focus on a narrow space-time window to isolate just one or a few process. We discuss here preliminary results on the vertical crustal deformation associated with both slow and rapid crustal deformation along a profile across the forearc region of the central Mexican subduction zone on the Guerrero sector, where the Cocos plate underthrusts the North American plate. This sector of the subduction zone is characterized by a particular slab geometry (with zones of rapid bending-unbending of the slab), irregular distributed seismicity, exceptionally large slow slip events (SSE) and non-volcanic tremors (NVT). We used the river network and geomorphic features of the Papagayo River to assess Quaternary crustal deformation. The Papagayo drainage network is strongly controlled by Late Cenozoic tectonic, Holocene and recent earthquake cycle processes. This is particularly true for the southern section of the drainage basin; from the dam in La Venta to the river mouth, where W-E structures commonly offset the course of the main river. River terraces occur along the course of the river at different elevations. We measured the height of a series of terraces and obtained OSL ages on quartz extracts to determine long-term rates of deformation. Finally, we discuss associations of the topography and river characteristics with the Cocos slab geometry, slow earthquakes, crustal deformation, and interseismic deformation.

Occurrence of 1 ka-old corals on an uplifted reef terrace in west Luzon, Philippines: Implications for a prehistoric extreme wave event in the South China Sea region

NASA Astrophysics Data System (ADS)

Ramos, Noelynna T.; Maxwell, Kathrine V.; Tsutsumi, Hiroyuki; Chou, Yu-Chen; Duan, Fucai; Shen, Chuan-Chou; Satake, Kenji

2017-12-01

Recent 230Th dating of fossil corals in west Luzon has provided new insights on the emergence of late Quaternary marine terraces that fringe west Luzon Island facing the Manila Trench. Apart from regional sea level changes, accumulated uplift from aseismic and seismic processes may have influenced the emergence of sea level indicators such as coral terraces and notches. Varied elevations of middle-to-late Holocene coral terraces along the west Luzon coasts reveal the differential uplift that is probably associated with the movement of local onland faults or upper-plate structures across the Manila Trench forearc basin. In Badoc Island, offshore west of Luzon mainland, we found notably young fossil corals, dated at 945.1 ± 4.6 years BP and 903.1 ± 3.9 years BP, on top of a 5-m-high reef platform. To constrain the mechanism of emergence or emplacement of these fossil corals, we use field geomorphic data and wave inundation models to constrain an extreme wave event that affected west Luzon about 1000 years ago. Our preliminary tectonic and tsunami models show that a megathrust rupture will likely lead to subsidence of a large part of the west Luzon coast, while permanent coastal uplift is attributed to an offshore upper-plate rupture in the northern Manila Trench forearc region. The modeled source fault ruptures and tsunami lead to a maximum wave height of more than 3 m and inundation distance as far as 2 km along the coasts of western and northern Luzon. While emplacement of coral boulders by an unusually strong typhoon is also likely, modeled storm surge heights along west Luzon do not exceed 2 m even with Typhoon Haiyan characteristics. Whether tsunami or unusually strong typhoon, the occurrence of a prehistoric extreme wave event in west Luzon remains an important issue in future studies of coastal hazards in the South China Sea region.

Crustal Strike-Slip Faulting along Small Circle Paths in the Northwestern United States

NASA Astrophysics Data System (ADS)

Brocher, T. M.; Wells, R. E.; Lamb, A. P.; Weaver, C. S.

2015-12-01

Late Cenozoic and Quaternary faults, seismicity lineaments, and focal mechanisms provide evidence that clockwise rotation of Washington and Oregon is accommodated by north-directed thrusting and strike-slip deformation in the Washington segment of the Cascadia forearc. Curvilinear NW- to NNW-trending high-angle strike-slip faults and seismicity lineaments define small circles around an Euler pole (117.7°W, 47.9°N) of rotation relative to North America that approximates GPS-derived poles for the rotation of eastern Washington and the Snake River Plain. Although the lengths of strike-slip faults that follow small circle paths suggest maximum earthquake magnitudes of M6.6 to M7.2, their slip rates calculated from the Euler pole are low (0.3 to 0.5 mm/yr). Many normal faults in the Lewis and Clark Zone in Montana, the Centennial fault system north of the Snake River Plain, west of the Wasatch Front, in the northern Basin and Range, and locally east of the Oregon Cascade arc are radial to this pole of rotation, suggesting that these normal faults help accommodate this crustal rotation. Regions undergoing contraction in western Washington and northwestern Oregon are separated from those to the east undergoing extension by lines radial to the Euler pole. In our regional kinematic model, dextral faults along small circles connect SW-directed crustal extension in the Intermountain Seismic Belt and E-directed extension in the Cascade arc south of Mount Hood to N-directed contraction in the Olympic Peninsula, Puget Lowland, and the Yakima Fold and Thrust Belt. The lack of Quaternary faulting and seismicity in the Oregon segment of the forearc is consistent with its clockwise rotation as a rigid block. Potential drivers of the crustal rotation include westward slab rollback and the Yellowstone geoid high, and the overall velocity field may integrate the response of rotating blocks and distributed deformation between them.

Imaging the structure of the Northern Lesser Antilles (Guadeloupe - Virgin Island) to assess the tectonic and thermo-mechanical behavior of an arcuate subduction zone that undergoes increasing convergence obliquity

NASA Astrophysics Data System (ADS)

Laurencin, M.; Marcaillou, B.; Klingelhoefer, F.; Jean-Frederic, L.; Graindorge, D.; Bouquerel, H.; Conin, M.; Crozon, J.; De Min, L.; De Voogd, B.; Evain, M.; Heuret, A.; Laigle, M.; Lallemand, S.; Lucazeau, F.; Pichot, T.; Prunier, C.; Rolandone, F.; Rousset, D.; Vitard, C.

2015-12-01

Paradoxically, the Northern Lesser Antilles is the less-investigated and the most tectonically and seismically complex segment of the Lesser Antilles subduction zone: - The convergence obliquity between the North American and Caribbean plates increases northward from Guadeloupe to Virgin Islands raising questions about the fore-arc tectonic partitioning. - The margin has undergone the subduction of the rough sediment-starved Atlantic Ocean floor spiked with ridges as well as banks docking, but the resulting tectonic deformation remains hypothetical in the absence of a complete bathymetry and of any seismic line. - Recent geodetic data and low historical seismic activity suggest a low interplate coupling between Saint-Martin and Anegada, but the sparse onshore seismometers located far from source zone cast doubt on this seismic gap. To shed new light on these questions, the ANTITHESIS project, 5 Marine Geophysical legs totaling 72 days, aims at recording a complete bathymetric map, deep and shallow seismic reflexion lines, wide-angle seismic data, heat-flow measurements and the seismic activity with a web of sea-bottom seismometers. Our preliminary results suggest that: - A frontal sliver of accretionary prism is stretched and expulsed northward by 50km along the left-lateral Bunce fault that limits the prism from the margin basement as far southward as 18.5°N. So far, this structure is the only interpreted sign of tectonic partitioning in the fore-arc. - The Anegada Passage extends eastward to the accretionary prism through strike-slip faults and pull-apart basins that possibly form a lef-lateral poorly-active system inherited from a past tectonic phase, consistently with geodetic and seismologic data. - The anomalously cold interplate contact, consistent with a low interseismic coupling, is possibly due to fluid circulation within the shallow crustal aquifer or a depressed thermal structure of the oceanic crust related to the slow-spreading at the medio-Atlantic ridge.

Sedimentary processes in modern and ancient oceanic arc settings: evidence from the Jurassic Talkeetna Formation of Alaska and the Mariana and Tonga Arcs, western Pacific

USGS Publications Warehouse

Draut, Amy E.; Clift, Peter D.

2006-01-01

Sediment deposited around oceanic volcanic ares potentially provides the most complete record of the tectonic and geochemical evolution of active margins. The use of such tectonic and geochemical records requires an accurate understanding of sedimentary dynamics in an arc setting: processes of deposition and reworking that affect the degree to which sediments represent the contemporaneous volcanism at the time of their deposition. We review evidence from the modern Mariana and Tonga arcs and the ancient arc crustal section in the Lower Jurassic Talkeetna Formation of south-central Alaska, and introduce new data from the Mariana Arc, to produce a conceptual model of volcaniclastic sedimentation processes in oceanic arc settings. All three arcs are interpreted to have formed in tectonically erosive margin settings, resulting in long-term extension and subsidence. Debris aprons composed of turbidites and debris flow deposits occur in the immediate vicinity of arc volcanoes, forming relatively continuous mass-wasted volcaniclastic records in abundant accommodation space. There is little erosion or reworking of old volcanic materials near the arc volcanic front. Tectonically generated topography in the forearc effectively blocks sediment flow from the volcanic front to the trench; although some canyons deliver sediment to the trench slope, most volcaniclastic sedimentation is limited to the area immediately around volcanic centers. Arc sedimentary sections in erosive plate margins can provide comprehensive records of volcanism and tectonism spanning < 10 My. The chemical evolution of a limited section of an oceanic arc may be best reconstructed from sediments of the debris aprons for intervals up to ~ 20 My but no longer, because subduction erosion causes migration of the forearc basin crust and its sedimentary cover toward the trench, where there is little volcaniclastic sedimentation and where older sediments are dissected and reworked along the trench slope.

Oroclinal Bending and Mountain Uplift in the Central Andes

NASA Astrophysics Data System (ADS)

Mpodozis, C.; Arriagada, C.; Roperch, P.

2007-05-01

The large paleomagnetic database now available for the Central Andes permits a good understanding of the overall spatial and temporal variations of rotations. Mesozoic to Early Paleogene rocks along the forearc of northern Chile (23°-28°S) record significant clockwise rotations (>25°) [Arriagada et al., 2006, Tectonics, doi:10.1029/2005TC001923]. Along the forearc of southern Peru, counterclockwise rotations recorded within flat lying red-beds (Moquegua Formation) increase from about -30° at 17.5°S to - 45° at15.5°S and decrease through time from the late Eocene to the late Oligocene-early Miocene [Roperch et al., 2006, Tectonics, doi:10.1029/2005TC001882]. Recently published thermo-chronological studies show evidence for strong exhumation within Bolivian Eastern Cordillera and the Puna plateau starting in the Eocene while structural studies indicate that the majority of crustal shortening in the Eastern Cordillera occurred during the Eocene-Oligocene, although the final stages of deformation may have continued through the Early Miocene. Rotations in the Peruvian and north Chilean forearc thus occurred at the same time than deformation and exhumation/uplift within the Eastern Cordillera. In contrast Neogene forearc rocks in southern Peru and northern Chile do not show evidences of rotation but low magnitude (10°) counterclockwise rotations are usually found in mid to late Miocene rocks from the northern Altiplano. These Neogene rotations are concomitant with shortening in the Sub-Andean zone and sinistral strike-slip faulting along the eastern edge of the northern Altiplano. We interpret the rotation pattern along the southern Peru and north Chile forearc as a result of strong late Eocene- late Oligocene oroclinal bending of the Central Andes associated with shortening gradients along the Eastern Cordillera associated both with the Abancay deflection and the Arica bend. The amount and spatial distribution of pre-Neogene shortening needed to account for oroclinal bending is difficult to estimate as the rotations may be partly driven by transpression along strike slip shear zones. The large rotations strongly highlight the importance of the pre-Neogene tectonic history in the evolution of the Central Andes.

Active Tectonics Around Pisagua, Northern Chile Gap: Seismological and Neotectonic Approaches

NASA Astrophysics Data System (ADS)

Comte, D.; Carrizo, D.; Peyrat, S.

2013-12-01

Northern Chile is a recognized mature seismic gap that is reaching the end of its megathrust cycle. Deformation associated with the convergence between the Nazca and the South American Plates is mainly absorbed along the interplate contact, but also partially accommodated along the upper plate. Even though distribution of the active deformation along this plate has been documented mainly in the backarc region, Late Cenozoic structures have been recognized along the forearc suggesting that some part of this deformation is also accommodated along the coastal region. Recent paleoseismological studies suggest that some of these structures are tectonically active and some could be potentially active, capable to generate shallow intraplate earthquakes (Mw˜7). However, seismological and geodetical evidences of the fault activation mechanisms are poorly documented, and the activation process remain not elucidate. Currently, Northern Chile seismic gap is monitored by regional seismic networks and partially studied by temporary local seismological experiments. Results of these studies suggest the presence of shallow seismicity along the forearc, but the relationships between upper plate faults and the seismicity has not been yet explored. We perform a detailed seismotectonic analysis of the subduction-forearc system in the central part of the Northern Chile seismic gap to establish relationships between the plate contact deformation and the upper plate faults. We present preliminary results of data recorded by a dense seismic network (three components continuous recording) deployed around Pisagua, between the coastline and the Central Depression, during several months. Pisagua region was chosen because the forearc faults exhibit an extraordinary well-preserved morphotectonic expression, and the upper part of the seismogenic interplate contact shows abundant continental intraplate seismicity that could be associated with the faults systems. The data recorded in this area allow us to better constrain the 3D geometry of faults related to plate contact using morphotectonis fault signature, well-located shallow seismicity and passive tomography. By this way, the architecture of the major forearc faults in the study area is determined for the first time using geological and geophysical approaches. Through this work, we contribute to better understand the physical relations between dynamics of the plate contact and the coastal fault activation.

BOLIVAR: the Caribbean-South America plate boundary between 60W and 71W as imaged by seismic reflection data

NASA Astrophysics Data System (ADS)

Magnani, M.; Mann, P.; Clark, S. A.; Escalona, A.; Zelt, C. A.; Christeson, G. L.; Levander, A.

2007-12-01

We present the results of ~6000km of marine multi-channel seismic (MCS) reflection data collected offshore Venezuela as part of the Broadband Ocean Land Investigation of Venezuela and the Antilles arc Region project (BOLIVAR). The imaged area spans almost 12 degrees of longitude and 5 degrees of latitude and encompasses the diffuse plate boundary between South America (SA) and the SE Caribbean plate (CAR). This plate boundary has been evolving for at least the past 55My when the volcanic island arc that borders the CAR plate started colliding obliquely with the SA continent: the collision front has migrated from west to east. BOLIVAR MCS data show that the crustal architecture of the present plate boundary is dominated by the eastward motion of the Caribbean plate with respect to SA and is characterized by a complex combination of convergent and strike-slip tectonics. To the north, the reflection data image the South Caribbean Deformed Belt (SCDB) and the structures related to the thrusting of the CAR plate under the Leeward Antilles volcanic arc region. The data show that the CAR underthrusting continues as far east as the southern edge of the Aves ridge and detailed stratigraphic dating of the Venezuela basin and trench deposits suggests that the collision began in the Paleogene. The amount of shortening along the SCDB decreases toward the east, in part due to the geometry of plate motion vectors and in part as a result of the NNE escape of the Maracaibo block in western Venezuela. South of the SCDB the MCS profiles cross the Leeward Antilles island arc and Cenozoic sedimentary basins, revealing a complex history of Paleogene-Neogene multiphase extension, compression, and tectonic inversion, as well as the influence of the tectonic activity along the right-lateral El Pilar - San Sebastian fault system. East of the Bonaire basin the MCS data image the southern end of the Aves Ridge abandoned volcanic island arc and the southwestern termination of the Grenada basin, characterized here by middle Miocene inverted structures, likely related to the WNW-ESE transpression between CAR and SA. The easternmost MCS profile crosses the ongoing arc-continent collision of the Lesser Antilles arc with SA and the backarc (Grenada Basin) and forearc (Tobago Basin) basins as well as the suture between the Caribbean arc and the passive margin of the continental SA plate near eastern Trinidad.

Local thickening of the Cascadia forearc crust and the origin of seismic reflectors in the uppermost mantle

USGS Publications Warehouse

Calvert, A.J.; Ramachandran, K.; Kao, H.; Fisher, M.A.

2006-01-01

Seismic reflection profiles from three different surveys of the Cascadia forearc are interpreted using P wave velocities and relocated hypocentres, which were both derived from the first arrival travel time inversion of wide-angle seismic data and local earthquakes. The subduction decollement, which is characterized beneath the continental shelf by a reflection of 0.5 s duration, can be traced landward into a large duplex structure in the lower forearc crust near southern Vancouver Island. Beneath Vancouver Island, the roof thrust of the duplex is revealed by a 5–12 km thick zone, identified previously as the E reflectors, and the floor thrust is defined by a short duration reflection from a − 1. We suggest that these relatively low velocities indicate the presence of either crustal rocks from the oceanic plate that have been underplated to the continent or crustal rocks from the forearc that have been transported downward by subduction erosion. The absence of seismicity from within the E reflectors implies that they are significantly weaker than the overlying crust, and the reflectors may be a zone of active ductile shear. In contrast, seismicity in parts of the D reflectors can be interpreted to mean that ductile shearing no longer occurs in the landward part of the duplex. Merging of the D and E reflectors at 42–46 km depth creates reflectivity in the uppermost mantle with a vertical thickness of at least 15 km. We suggest that pervasive reflectivity in the upper mantle elsewhere beneath Puget Sound and the Strait of Georgia arises from similar shear zones.

Active transpressional tectonics in the Andean forearc of southern Peru quantified by 10Be surface exposure dating of an active fault scarp

NASA Astrophysics Data System (ADS)

Benavente, Carlos; Zerathe, Swann; Audin, Laurence; Hall, Sarah R.; Robert, Xavier; Delgado, Fabrizio; Carcaillet, Julien; Team, Aster

2017-09-01

Our understanding of the style and rate of Quaternary tectonic deformation in the forearc of the Central Andes is hampered by a lack of field observations and constraints on neotectonic structures. Here we present a detailed analysis of the Purgatorio fault, a recently recognized active fault located in the forearc of southern Peru. Based on field and remote sensing analysis (Pléiades DEM), we define the Purgatorio fault as a subvertical structure trending NW-SE to W-E along its 60 km length, connecting, on its eastern end, to the crustal Incapuquio Fault System. The Purgatorio fault accommodates right-lateral transpressional deformation, as shown by the numerous lateral and vertical plurimetric offsets recorded along strike. In particular, scarp with a 5 m cumulative throw is preserved and displays cobbles that are cut and covered by slickensides. Cosmogenic radionuclide exposure dating (10Be) of quartzite cobbles along the vertical fault scarp yields young exposure ages that can be bracketed between 0 to 6 ka, depending on the inheritance model that is applied. Our preferred scenario, which takes in account our geomorphic observations, implies at least two distinct rupture events, each associated with 3 and 2 m of vertical offset. These two events plausibly occurred during the last thousand years. Nevertheless, an interpretation invoking more tectonic events along the fault cannot be ruled out. This work affirms crustal deformation along active faults in the Andean forearc of southern Peru during the last thousand years.

Pleistocene vertical motions of the Costa Rican outer forearc from subducting topography and a migrating fracture zone triple junction

USGS Publications Warehouse

Edwards, Joel H.; Kluesner, Jared W.; Silver, Eli A.; Bangs, Nathan L.

2018-01-01

Understanding the links between subducting slabs and upper-plate deformation is a longstanding goal in the field of tectonics. New 3D seismic sequence stratigraphy, mapped within the Costa Rica Seismogenesis Project (CRISP) seismic-reflection volume offshore southern Costa Rica, spatiotemporally constrains several Pleistocene outer forearc processes and provides clearer connections to subducting plate dynamics. Three significant shelf and/or slope erosional events at ca. 2.5–2.3 Ma, 1.95–1.78 Ma, and 1.78–1.19 Ma, each with notable differences in spatial extent, volume removed, and subsequent margin response, caused abrupt shifts in sedimentation patterns and rates. These shifts, coupled with observed deformation, suggest three primary mechanisms for Pleistocene shelf and slope vertical motions: (1) regional subaerial erosion and rapid subsidence linked to the southeastward Panama Fracture Zone triple-junction migration, with associated abrupt bathymetric variations and plate kinematic changes; (2) transient, kilometer-scale uplift and subsidence due to inferred subducting plate topography; and (3) progressive outer wedge shortening accommodated by landward- and seaward-dipping thrust faults and fold development due to the impinging Cocos Ridge. Furthermore, we find that the present-day wedge geometry (to within ∼3 km along strike) has been maintained through the Pleistocene, in contrast to modeled landward margin retreat. We also observe that deformation, i.e., extension and shortening, is decoupled from net margin subsidence. Our findings do not require basal erosion, and they suggest that the vertical motions of the Costa Rican outer forearc are not the result of a particular continuous process, but rather are a summation of plate to plate changes (e.g., passage of a fracture zone triple junction) and episodic events (e.g., subducting plate topography).

Two-dimensional seismic velocity models of southern Taiwan from TAIGER transects

NASA Astrophysics Data System (ADS)

McIntosh, K. D.; Kuochen, H.; Van Avendonk, H. J.; Lavier, L. L.; Wu, F. T.; Okaya, D. A.

2013-12-01

We use a broad combination of wide-angle seismic data sets to develop high-resolution crustal-scale, two-dimensional, velocity models across southern Taiwan and the adjacent Huatung Basin. The data were recorded primarily during the TAIGER project and include records of thousands of marine airgun shots, several land explosive sources, and ~90 Earthquakes. Both airgun sources and earthquake data were recorded by dense land arrays, and ocean bottom seismographs (OBS) recorded airgun sources east of Taiwan. This combination of data sets enables us to develop a high-resolution upper- to mid-crustal model defined by marine and explosive sources, while also constraining the full crustal structure - with depths approaching 50 km - by using the earthquake and explosive sources. These data and the resulting models are particularly important for understanding the development of arc-continent collision in Taiwan. McIntosh et al. (2013) have shown that highly extended continental crust of the northeastern South China Sea rifted margin is underthrust at the Manila trench southwest of Taiwan but then is structurally underplated to the accretionary prism. This process of basement accretion is confirmed in the southern Central Range of Taiwan where basement outcrops can be directly linked to high seismic velocities measured in the accretionary prism well south of the continental shelf, even south of Taiwan. These observations indicate that the southern Central Range begins to grow well before there is any direct interaction between the North Luzon arc and the Eurasian continent. Our transects provide information on how the accreted mass behaves as it approaches the continental shelf and on deformation of the arc and forearc as this occurs. We suggest that arc-continent collision in Taiwan actually develops as arc-prism-continent collision.

Mechanical and hydraulic properties of Nankai accretionary prism sediments: Effect of stress path

NASA Astrophysics Data System (ADS)

Kitajima, Hiroko; Chester, Frederick M.; Biscontin, Giovanna

2012-10-01

We have conducted triaxial deformation experiments along different loading paths on prism sediments from the Nankai Trough. Different load paths of isotropic loading, uniaxial strain loading, triaxial compression (at constant confining pressure, Pc), undrained Pc reduction, drained Pc reduction, and triaxial unloading at constant Pc, were used to understand the evolution of mechanical and hydraulic properties under complicated stress states and loading histories in accretionary subduction zones. Five deformation experiments were conducted on three sediment core samples for the Nankai prism, specifically from older accreted sediments at the forearc basin, underthrust slope sediments beneath the megasplay fault, and overthrust Upper Shikoku Basin sediments along the frontal thrust. Yield envelopes for each sample were constructed based on the stress paths of Pc-reduction using the modified Cam-clay model, and in situ stress states of the prism were constrained using the results from the other load paths and accounting for horizontal stress. Results suggest that the sediments in the vicinity of the megasplay fault and frontal thrust are highly overconsolidated, and thus likely to deform brittle rather than ductile. The porosity of sediments decreases as the yield envelope expands, while the reduction in permeability mainly depends on the effective mean stress before yield, and the differential stress after yield. An improved understanding of sediment yield strength and hydromechanical properties along different load paths is necessary to treat accurately the coupling of deformation and fluid flow in accretionary subduction zones.

Large trench-parallel gravity variations predict seismogenic behavior in subduction zones.

PubMed

Song, Teh-Ru Alex; Simons, Mark

2003-08-01

We demonstrate that great earthquakes occur predominantly in regions with a strongly negative trench-parallel gravity anomaly (TPGA), whereas regions with strongly positive TPGA are relatively aseismic. These observations suggest that, over time scales up to at least 1 million years, spatial variations of seismogenic behavior within a given subduction zone are stationary and linked to the geological structure of the fore-arc. The correlations we observe are consistent with a model in which spatial variations in frictional properties on the plate interface control trench-parellel variations in fore-arc topography, gravity, and seismogenic behavior.

Geologic map of the Camas Quadrangle, Clark County, Washington, and Multnomah County, Oregon

USGS Publications Warehouse

Evarts, Russell C.; O'Connor, Jim E.

2008-01-01

The Camas 7.5' quadrangle is in southwestern Washington and northwestern Oregon approximately 20 km east of Portland. The map area, bisected by the Columbia River, lies on the eastern margin of the Portland Basin, which is part of the Puget-Willamette Lowland that separates the Cascade Range from the Oregon Coast Range. Since late Eocene time, the Cascade Range has been the locus of an episodically active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. Bedrock consists largely of basalt and basaltic andesite flows that erupted during late Oligocene time from one or more vents located outside the map area. These rocks crop out only north of the Columbia River: at the base of Prune Hill in Camas, where they dip southward at about 5°; and east of Lacamas Creek, where they dip to the southeast at 15 to 30°. The volcanic bedrock is unconformably overlain by Neogene sediments that accumulated as the Portland Basin subsided. In the Camas quadrangle, most of these sediments consist of basaltic hyaloclastic debris generated in the volcanic arc to the east and carried into the Portland Basin by the ancestral Columbia River. The dominant structures in the map area are northwest-striking dextral strike-slip faults that offset the Paleogene basin floor as well as the lower part of the basin fill. The Oligocene rocks at Prune Hill and to the east were uplifted in late Pliocene to early Pleistocene time within a restraining bend along one of these dextral faults. In Pleistocene time, basaltic andesite flows issued from a volcano centered on the west side of Prune Hill; another flow entered the map area from the east. These flows are part of the Boring volcanic field, which comprises several dozen late Pliocene and younger monogenetic volcanoes scattered throughout the greater Portland region. In latest Pleistocene time, the Missoula floods of glacial-outburst origin inundated the Portland Basin. The floods deposited huge bars of poorly sorted gravel in the lee of Prune Hill and west of the Sandy River. Volcanic debris from Mount Hood form a prominent delta at the mouth of the Sandy River.This map is a contribution to a program designed to improve geologic knowledge of the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. More detailed information on the bedrock and surficial geology of the basin and its surrounding area is necessary to refine assessments of seismic risk, ground-failure hazards and resource availability in this rapidly growing region.

Tectonic evolution of the Troodos Ophiolite within the Tethyan Framework

NASA Astrophysics Data System (ADS)

Dilek, Yildirim; Thy, Peter; Moores, Eldridge M.; Ramsden, Todd W.

1990-08-01

A new tectonic model reconciles conflicting structural and geochemical evidence for the origin of the Troodos ophiolite, a well-preserved remnant of Neotethyan oceanic crust. Grabens and normal faults within the sheeted dike complex and the extrusive sequence of the Troodos ophiolite resemble those of oceanic spreading centers. Diverse intrusive and tectonic contact relationships between the sheeted dike complex and the underlying plutonic sequence indicate multiple and episodic intrusion of magma and along- and across-strike variation in volcanic and tectonic activity during development of oceanic crust. Coupled with the existence of the Arakapas transform fault to the south, these structural and intrusive relationships suggest origin at an intersection between a spreading center and a transform fault. The arclike chemistry of sheeted dikes and related extrusive rocks and the inferred highly depleted and hydrous nature of the mantle source of the late stage intrusive and extrusive rocks argue, however, for generation of part of the ophiolite within a subduction zone environment. Regional reconstructions suggest that the Mesozoic Neotethys may have evolved as a marginal basin both to the Afro-Arabian continent and the Paleotethyan ocean over an active or recently active south dipping subduction zone. The Troodos ophiolite and other eastern Mediterranean ophiolites, whose magma compositions were affected by the subducted Paleotethyan slab, may have formed along east-west trending spreading centers separated by north-south trending transform faults within this marginal basin. A rapid change in relative plate motion in late Cretaceous time between Eurasia and Afro-Arabia created a regional compressive regime that may have resulted in plate boundary reorganizations within the Neotethyan realm and in initiation of north dipping subduction zone(s) beneath the Troodos and other ophiolites in the region. The apparent forearc setting of the Troodos ophiolite is a consequence of this intraoceanic displacement after its formation and thus is unrelated to its generation.

Detailed seismic velocity structure beneath the Hokkaido corner, NE Japan: Collision process of the forearc sliver

NASA Astrophysics Data System (ADS)

Kita, S.; Hasegawa, A.; Okada, T.; Nakajima, J.; Matsuzawa, T.; Katsumata, K.

2010-12-01

1. Introduction In south-eastern Hokkaido, the Kuril forearc sliver is colliding with the northeastern Japan arc due to the oblique subduction of the Pacific plate. This collision causes the formation of the Hidaka mountain range since the late Miocene (Kimura, 1986) and delamination of the lower-crust materials of the Kuril forearc sliver, which would be expected to descend into the mantle wedge below (e.g., Ito 2000; Ito and Iwasaki, 2002). In this study, we precisely investigated the three-dimensional seismic velocity structure beneath the Hokkaido corner to examine the collision of two forearcs in this area by using both of data from a dense temporary seismic network deployed in this area (Katsumata et al. [2006]) and those from the Kiban observation network, which covers the entire Japanese Islands with a station separation of 15-20 km. 2. Data and method The double-difference tomography method (Zhang and Thurber, 2003; 2006) was applied to a large number of arrival time data of 201,527 for P-waves and 150,963 for S-waves that were recorded at 125 stations from 10,971 earthquakes that occurred from 1999 to 2010. Grid intervals were set at 10 km in the along-arc direction, 12.5 km perpendicular to it, and 5-10 km in the vertical direction. 3. Results and discussion Inhomogeneous seismic velocity structure was clearly imaged in the Hokkaido corner at depths of 0-120 km. A high-velocity anomaly of P- and S- waves with a volume of 20 km x 90 km x 35km was detected just beneath the main zone of the Hidaka metamorphic belt at depths of 0-35 km. This high-velocity anomaly is continuously distributed from the depths of the mantle wedge to the surface. The western edge of the anomaly exactly corresponds to the Hidaka main thrust (HMT) at the surface. The highest velocity value in the anomaly corresponds to those of the uppermost mantle material (e.g. peridotite). The location of them at depths of 0-35km is also consistent with that of the Horoman-Peridotite belt, which is located at the southwestern edge of the main zone of the Hidaka metamorphic belt.On the other hand, a low-velocity anomaly of P- and S- waves with a volume of 80 km x 100 km x 50 km is distributed to the west of the Hidaka metamorphic belt at depths of 35-90km. This low-velocity anomaly seems to be continuously distributed from the continental crust of the NE Japan forearc. The velocity values of this low-V anomaly correspond to those of crustal materials, which is consistent with results of the tomographic study of Kita et al. [2010, EPSL] and Takanami et al. [1982]. Comparison with the results of seismic reflection surveys of Ito [2000] shows that the boundary between anomalous high-velocity mantle materials and low-velocity continental crustal materials just beneath the Hidaka main thrust (HMT) presently obtained is exactly consistent with the locations of reflection planes of their study. Moreover, our study also suggests that the anomalous low-velocity crustal materials at the mantle wedge depth appears to belong to the NE Japan forearc crust, which does not support the expectation of the previous studies that the delaminated lower-crust materials of the Kuril forearc sliver descends into the mantle wedge due to the collision.

In-situ arc crustal section formed at the initial stage of oceanic island arc -Diving survey in the Izu-Bonin forearc-

NASA Astrophysics Data System (ADS)

Ishizuka, O.; Yuasa, M.; Tani, K.; Umino, S.; Reagan, M. K.; Kanayama, K.; Harigane, Y.; Miyajima, Y.

2009-12-01

The Bonin Ridge is an unusually prominent forearc massif in the Izu-Bonin arc that exposes early arc volcanic rocks on Bonin Islands. Submarine parts of the ridge, which could complement the record of volcanism preserved on the islands, had not been extensively investigated. In 2007, dredge sampling in the Izu-Bonin forearc brought us ample evidence of exposure of arc crustal section formed at initial stage of this arc along the landward slope of Izu-Ogasawara trench. Based on this discovery, we conducted Shinkai 6500 submersible survey in May, 2009. This expedition enabled us to obtain general understanding of the crustal section that formed when this oceanic arc began. We investigated 3 areas of the Bonin Ridge. Near 28o25’N, 4 dives were used to look at the lower to upper crustal section. The deepest dive observed both gabbro and basalt/dolerite, and appears to have passed over the boundary between the two. Lower slope is composed of fractured gabbro, whereas pillow lava was observed in the uppermost part of this dive track. Two dives surveyed up-slope of the previous dive found outcrop of numerous doleritic basalt dykes and fractured basaltic lava cut by dykes between water depth of 6000 and 5500m. The shallowest dive recovered volcanic breccia and conglomerate with boninitic and basaltic clasts. Combined with results from other dives and dredging, the members of forearc crustal section are from bottom to top: 1) gabbroic rocks, 2) a sheeted dyke complex, 3) basaltic lava flows, 4) volcanic breccia and conglomerate with boninitic and basaltic clasts, 5) boninite and tholeiitic andesite lava flows and dykes (on the Bonin Islands). In addition to this crustal section, dredge sampling and ROV Kaiko dives recovered mantle peridotite below the gabbro. These observations indicate that almost all of the forearc crust down to Moho has been preserved. Preliminary data indicate that basaltic rocks made of sheeted dykes and lava flows and lower gabbros are generally comagmatic. These basalts show chemical characteristics similar to MORB (i.e., with no slab signature). These basalts have lower Ti, LREE, LREE/HREE, Nb/Zr and Zr/Y than Philippine Sea MORB, but with comparable or slightly lower 143Nd/144Nd. Even though the likely source of these MORB-like basalts can be linked to an Indian Ocean-type mantle, the source for these basalt could be more depleted due to previous event of melt extraction. These basalts also have distinctly higher 87Sr/86Sr and 206Pb/204Pb than Philippine Sea MORB, which may imply the presence of lithospheric mantle with ancient enrichment. Age determination of basalt and gabbro by Ar/Ar and U-Pb methods has confirmed that these rocks predate boninite and could be older than 50Ma. Chemically and petrographically they are similar to tholeiites from the Mariana forearc that predate boninitic volcanism in that region that are considered to be related to subduction (Reagan et al., in prep). This strongly implies that MORB-like tholeiitic magmatism was associated with forearc spreading along the length of the Izu-Bonin-Mariana arc.

Detrital Thermochronology Record of the Local-to-Extraregional Provenance Shift Recorded by the Northern Peninsular Ranges Forearc

NASA Astrophysics Data System (ADS)

Flores, M.; Shulaker, D. Z.

2016-12-01

Previously measured detrital zircon U-Pb age distributions have revealed that Late Cretaceous to Eocene forearc strata in the Santa Ana mountains region experienced a dramatic shift in sedimentary provenance from a 125-90 Ma northern Peninsular Ranges batholith (PRB) source region along the continental margin to a cratonal source area intruded by Late Cretaceous (85-75 Ma) plutons within the continental interior (western Sonora). To improve our understanding of the timing and magnitude of denudation prior to, and during this local to extraregional provenance shift, we have measured new detrital K-feldspar 40Ar/39Ar total fusion and zircon U-Pb age distributions from forearc sandstones. Our combined crystallization age and thermal history results confirm two pulses of rapid denudation of the PRB. These include a syn-batholith phase (Cenomanian) and a post-batholithic (Maastrichtian to Paleocene) phase attributed to shallow subduction. The new data require that significant (5-10 km) syn-batholithic erosional denudation of the northern PRB had already occurred by ca. 95 Ma and that post-emplacement denudation of the PRB accelerated again during the Maastrichtian with the eastern PRB providing the bulk of the detritus. Our new results demonstrate that deposition of the Paleocene Silverado Fm. occurred during a transitional period. Sand reaching the forearc during the Paleocene was derived from both the heavily denuded eastern PRB with additional input supplied either from Late Cretaceous plutons of northwestern Sonoran region and/or similar plutons emplaced in thrust sheets atop PRB basement within the Santa Rosa Mountains. In contrast, the Eocene Santiago Fm. was nearly entirely derived from extraregional sources that supplied abundant late Cretaceous (75-85 Ma) and Proterozoic (1.4 & 1.7 Ga) detritus with virtually no PRB-derived sediment detected.

High- and low-Cr chromitite and dunite in a Tibetan ophiolite: evolution from mature subduction system to incipient forearc in the Neo-Tethyan Ocean

NASA Astrophysics Data System (ADS)

Xiong, Qing; Henry, Hadrien; Griffin, William L.; Zheng, Jian-Ping; Satsukawa, Takako; Pearson, Norman J.; O'Reilly, Suzanne Y.

2017-06-01

The microstructures, major- and trace-element compositions of minerals and electron backscattered diffraction (EBSD) maps of high- and low-Cr# [spinel Cr# = Cr3+/(Cr3+ + Al3+)] chromitites and dunites from the Zedang ophiolite in the Yarlung Zangbo Suture (South Tibet) have been used to reveal their genesis and the related geodynamic processes in the Neo-Tethyan Ocean. The high-Cr# (0.77-0.80) chromitites (with or without diopside exsolution) have chromite compositions consistent with initial crystallization by interaction between boninitic magmas, harzburgite and reaction-produced magmas in a shallow, mature mantle wedge. Some high-Cr# chromitites show crystal-plastic deformation and grain growth on previous chromite relics that have exsolved needles of diopside. These features are similar to those of the Luobusa high-Cr# chromitites, possibly recycled from the deep upper mantle in a mature subduction system. In contrast, mineralogical, chemical and EBSD features of the Zedang low-Cr# (0.49-0.67) chromitites and dunites and the silicate inclusions in chromite indicate that they formed by rapid interaction between forearc basaltic magmas (MORB-like but with rare subduction input) and the Zedang harzburgites in a dynamically extended, incipient forearc lithosphere. The evidence implies that the high-Cr# chromitites were produced or emplaced in an earlier mature arc (possibly Jurassic), while the low-Cr# associations formed in an incipient forearc during the initiation of a new episode of Neo-Tethyan subduction at 130-120 Ma. This two-episode subduction model can provide a new explanation for the coexistence of high- and low-Cr# chromitites in the same volume of ophiolitic mantle.

Forearc structure beneath southwestern British Columbia: A three-dimensional tomographic velocity model

USGS Publications Warehouse

Ramachandran, K.; Dosso, S.E.; Spence, G.D.; Hyndman, R.D.; Brocher, T.M.

2005-01-01

This paper presents a three-dimensional compressional wave velocity model of the forearc crust and upper mantle and the subducting Juan de Fuca plate beneath southwestern British Columbia and the adjoining straits of Georgia and Juan de Fuca. The velocity model was constructed through joint tomographic inversion of 50,000 first-arrival times from earthquakes and active seismic sources. Wrangellia rocks of the accreted Paleozoic and Mesozoic island arc assemblage underlying southern Vancouver Island in the Cascadia forearc are imaged at some locations with higher than average lower crustal velocities of 6.5-7.2 km/s, similar to observations at other island arc terranes. The mafic Eocene Crescent terrane, thrust landward beneath southern Vancouver Island, exhibits crustal velocities in the range of 6.0-6.7 km/s and is inferred to extend to a depth of more than 20 km. The Cenozoic Olympic Subduction Complex, an accretionary prism thrust beneath the Crescent terrane in the Olympic Peninsula, is imaged as a low-velocity wedge to depths of at least 20 km. Three zones with velocities of 7.0-7.5 km/s, inferred to be mafic and/or ultramafic units, lie above the subducting Juan de Fuca plate at depths of 25-35 km. The forearc upper mantle wedge beneath southeastern Vancouver Island and the Strait of Georgia exhibits low velocities of 7.2-7.5 km/s, inferred to correspond to ???20% serpentinization of mantle peridotites, and consistent with similar observations in other warm subduction zones. Estimated dip of the Juan de Fuca plate beneath southern Vancouver Island is ???11??, 16??, and 27?? at depths of 30, 40, and 50 km, respectively. Copyright 2005 by the American Geophysical Union.

Tectonic evolution of the Yarlung suture zone, Lopu Range region, southern Tibet

NASA Astrophysics Data System (ADS)

Laskowski, Andrew K.; Kapp, Paul; Ding, Lin; Campbell, Clay; Liu, XiaoHui

2017-01-01

The Lopu Range, located 600 km west of Lhasa, exposes a continental high-pressure metamorphic complex beneath India-Asia (Yarlung) suture zone assemblages. Geologic mapping, 14 detrital U-Pb zircon (n = 1895 ages), 11 igneous U-Pb zircon, and nine zircon (U-Th)/He samples reveal the structure, age, provenance, and time-temperature histories of Lopu Range rocks. A hornblende-plagioclase-epidote paragneiss block in ophiolitic mélange, deposited during Middle Jurassic time, records Late Jurassic or Early Cretaceous subduction initiation followed by Early Cretaceous fore-arc extension. A depositional contact between fore-arc strata (maximum depositional age 97 ± 1 Ma) and ophiolitic mélange indicates that the ophiolites were in a suprasubduction zone position prior to Late Cretaceous time. Five Gangdese arc granitoids that intrude subduction-accretion mélange yield U-Pb ages between 49 and 37 Ma, recording Eocene southward trench migration after collision initiation. The south dipping Great Counter Thrust system cuts older suture zone structures, placing fore-arc strata on the Kailas Formation, and sedimentary-matrix mélange on fore-arc strata during early Miocene time. The north-south, range-bounding Lopukangri and Rujiao faults comprise a horst that cuts the Great Counter Thrust system, recording the early Miocene ( 16 Ma) transition from north-south contraction to orogen-parallel (E-W) extension. Five early Miocene (17-15 Ma) U-Pb ages from leucogranite dikes and plutons record crustal melting during extension onset. Seven zircon (U-Th)/He ages from the horst block record 12-6 Ma tectonic exhumation. Jurassic—Eocene Yarlung suture zone tectonics, characterized by alternating episodes of contraction and extension, can be explained by cycles of slab rollback, breakoff, and shallow underthrusting—suggesting that subduction dynamics controlled deformation.

Marine forearc tectonics in the unbroken segment of the Northern Chile seismic gap

NASA Astrophysics Data System (ADS)

Geersen, J.; Behrmann, J.; Ranero, C. R.; Klaucke, I.; Kopp, H.; Lange, D.; Barckhausen, U.; Reichert, C. J.; Diaz-Naveas, J.

2016-12-01

While clearly occurring within the well-defined Northern Chile seismic gap, the 2014 Mw. 8.1 Iquique Earthquake only ruptured part of this gap, leaving large and possibly highly coupled areas untouched. These non-ruptured areas now may pose an elevated seismic hazard due to the transfer of stresses resulting from the 2014 rupture. Here we use recently collected multibeam bathymetric data, covering 90% of the North Chilean marine forearc, in combination with unpublished seismic reflection images to derive a tectonic map of the marine forearc in the unbroken segment of the seismic gap. In the entire study area we find evidence for widespread normal faulting. Seaward dipping normal faults locally extend close to the deformation front at the deep-sea trench under 8 km of water. Similar normal faults on the lower slope are neither observed further north (2014 Iquique earthquake area) nor further south (2007 Tocopilla earthquake area). On the upper continental slope, some of the normal faults dip towards the continent, defining N-S trending ridges that can be traced over tens of kilometers. The spatial variations in normal faulting do not correlate with obvious changes in the structural and tectonic setting of the subduction zone (e.g. plate convergence rate and direction, trench sediment thickness, subducting plate roughness). Thus, the permanent deformation recorded in the spatial distribution of faults may hold crucial information about the long-term seismic behavior of the Northern Chile seismic gap over multiple earthquake cycles. Although the structural interpretations cannot directly be translated into seismic hazard, the tectonic map serves to better understand deformation in the marine forearc in relation to the seismic cycle, historic seismicity, and the spatial distribution of plate-coupling.

A bird's eye view of "Understanding volcanoes in the Vanuatu arc"

NASA Astrophysics Data System (ADS)

Vergniolle, S.; Métrich, N.

2016-08-01

The Vanuatu intra-oceanic arc, located between 13 and 22°S in the southwest Pacific Ocean (Fig. 1), is one of the most seismically active regions with almost 39 earthquakes magnitude 7 + in the past 43 years (Baillard et al., 2015). Active deformation in both the Vanuatu subduction zone and the back-arc North-Fiji basin accommodates the variation of convergence rates which are c.a. 90-120 mm/yr along most of the arc (Taylor et al., 1995; Pelletier et al., 1998). The convergence rate is slowed down to 25-43 mm/yr (Baillard et al., 2015) in the central segment where the D'Entrecasteaux ridge - an Eocene-Oligocene island arc complex on the Australian subducting plate - collides and is subducted beneath the fore-arc (Taylor et al., 2005). Hence, the Vanuatu arc is segmented in three blocks which move independently; as the north block rotates counter-clockwise in association with rapid back-arc spreading ( 80 mm/year), the central block translates eastward and the south block rotates clockwise (Calmant et al., 2003; Bergeot et al., 2009). (See Fig. 1.)

India-Asia collision was at 24°N and 50 Ma: palaeomagnetic proof from southernmost Asia

PubMed Central

Meng, Jun; Wang, Chengshan; Zhao, Xixi; Coe, Rob; Li, Yalin; Finn, David

2012-01-01

How and when India collided with Asia is crucial for global climate and continental dynamics. We present new palaeomagnetic data showing that the Xigaze forearc basin of southern Tibet was located at 24.2±5.9°N during 54–57 Ma, providing a direct constraint on the position of the southernmost margin of Asia at this crucial stage. Our study suggests 1) the age and locus of the initial India-Asia collision are at ~50 Ma and ~24°N, respectively; 2) Tibet resisted India's northward push during the first ~16 Ma of initial impact from the collision and experienced little latitudinal displacement; and 3) Sometime a little after 34 Ma, Greater India was consumed and thicker Indian Craton subsequently made contact with Asia, resulting in ~6° northward drift of Asia. Our model has implications for the process by which the high proto-Tibetan plateau formed and for the two slowdowns of India's convergence rate with Asia. PMID:23226592

High abundance of JS-1- and Chloroflexi-related Bacteria in deeply buried marine sediments revealed by quantitative, real-time PCR.

PubMed

Blazejak, Anna; Schippers, Axel

2010-05-01

Sequences of members of the bacterial candidate division JS-1 and the classes Anaerolineae and Caldilineae of the phylum Chloroflexi are frequently found in 16S rRNA gene clone libraries obtained from marine sediments. Using a newly designed quantitative, real-time PCR assay, these bacterial groups were jointly quantified in samples from near-surface and deeply buried marine sediments from the Peru margin, the Black Sea, and a forearc basin off the island of Sumatra. In near-surface sediments, sequences of the JS-1 as well as Anaerolineae- and Caldilineae-related Bacteria were quantified with significantly lower 16S rRNA gene copy numbers than the sequences of total Bacteria. In contrast, in deeply buried sediments below approximately 1 m depth, similar quantities of the 16S rRNA gene copies of these specific groups and Bacteria were found. This finding indicates that JS-1 and Anaerolineae- and Caldilineae-related Bacteria might dominate the bacterial community in deeply buried marine sediments and thus seem to play an important ecological role in the deep biosphere.

Unravelling the pre-Variscan evolution of the Habach terrane (Tauern Window, Austria) by U-Pb SHRIMP zircon data

NASA Astrophysics Data System (ADS)

Eichhorn, Roland; Loth, Georg; Kennedy, Allen

2001-08-01

The U-Pb SHRIMP age determinations of zircons from the Habach terrane (Tauern Window, Austria) reveal a complex evolution of this basement unit, which is exposed in the Penninic domain of the Alpine orogen. The oldest components are found in zircons of a metamorphosed granitoid clast, of a migmatitic leucosome, and of a meta-rhyolitic (Variscan) tuff which bear cores of Archean age. The U-Pb ages of discordant zircon cores of the same rocks range between 540 and 520 Ma. It is assumed that the latter zircons were originally also of Archean origin and suffered severe lead loss, whilst being incorporated into Early-Cambrian volcanic arc magmas. The provenance region of the Archean (2.64-2.06 Ga) zircons is assumed to be a terrane of Gondwana affinity: i.e., the West African craton (Hoggar Shield, Reguibat Shield). The Caledonian metamorphism left a pervasive structural imprint in amphibolite facies on rocks of the Habach terrane; it is postdated by discordant zircons of a migmatitic leucosome at <440 Ma (presumably ca. 420 Ma). Alpine and Variscan upper greenschist- to amphibolite-facies conditions caused partial lead loss in zircons of a muscovite gneiss ('white schist') only, where extensive fluid flow and brittle deformation due to its position near a nappe-sole thrust enhanced the grains' susceptibility to isotopic disturbance. The Habach terrane - an active continental margin with ensialic back-arc development - showed subduction-induced magmatic activity approx. between 550 and 507 Ma. Back-arc diorites and arc basalts were intruded by ultramafic sills and subsequently by small patches of mantle-dominated unaltered and (in the vicinity of a major tungsten deposit) altered granitoids. Fore-arc (shales) and back-arc (greywackes, cherts) basin sediments as well as arc and back-arc magmatites were not only nappe-stacked by the Caledonian compressional regime closing the presumably narrow oceanic back-arc basin and squeezing mafic to ultramafic cumulates out of high-level magma chambers (496-482 Ma). It also induced uplift and erosion of deeply rooted crystalline complexes and triggered the development of a successor basin filled with predominantly clastic greywacke-arkosic sediments. The study demonstrates that the basement rocks exposed in the Habach terrane might be the 'missing link' between similar units of the more westerly positioned External domain (i.e., Aar, Aiguilles Rouges, Mont Blanc) and the Austroalpine domain to the east (Oetztal, Silvretta).

A serpentinite-hosted ecosystem in the Southern Mariana Forearc

NASA Astrophysics Data System (ADS)

Ohara, Yasuhiko; Reagan, Mark K.; Fujikura, Katsunori; Watanabe, Hiromi; Michibayashi, Katsuyoshi; Ishii, Teruaki; Stern, Robert J.; Pujana, Ignacio; Martinez, Fernando; Girard, Guillaume; Ribeiro, Julia; Brounce, Maryjo; Komori, Naoaki; Kino, Masashi

2012-02-01

Several varieties of seafloor hydrothermal vents with widely varying fluid compositions and temperatures and vent communities occur in different tectonic settings. The discovery of the Lost City hydrothermal field in the Mid-Atlantic Ridge has stimulated interest in the role of serpentinization of peridotite in generating H2- and CH4-rich fluids and associated carbonate chimneys, as well as in the biological communities supported in highly reduced, alkaline environments. Abundant vesicomyid clam communities associated with a serpentinite-hosted hydrothermal vent system in the southern Mariana forearc were discovered during a DSV Shinkai 6500 dive in September 2010. We named this system the "Shinkai Seep Field (SSF)." The SSF appears to be a serpentinite-hosted ecosystem within a forearc (convergent margin) setting that is supported by fault-controlled fluid pathways connected to the decollement of the subducting slab. The discovery of the SSF supports the prediction that serpentinite-hosted vents may be widespread on the ocean floor. The discovery further indicates that these serpentinite-hosted low-temperature fluid vents can sustain high-biomass communities and has implications for the chemical budget of the oceans and the distribution of abyssal chemosynthetic life.

A serpentinite-hosted ecosystem in the Southern Mariana Forearc

PubMed Central

Ohara, Yasuhiko; Reagan, Mark K.; Fujikura, Katsunori; Watanabe, Hiromi; Michibayashi, Katsuyoshi; Ishii, Teruaki; Stern, Robert J.; Pujana, Ignacio; Martinez, Fernando; Girard, Guillaume; Ribeiro, Julia; Brounce, Maryjo; Komori, Naoaki; Kino, Masashi

2012-01-01

Several varieties of seafloor hydrothermal vents with widely varying fluid compositions and temperatures and vent communities occur in different tectonic settings. The discovery of the Lost City hydrothermal field in the Mid-Atlantic Ridge has stimulated interest in the role of serpentinization of peridotite in generating H2- and CH4-rich fluids and associated carbonate chimneys, as well as in the biological communities supported in highly reduced, alkaline environments. Abundant vesicomyid clam communities associated with a serpentinite-hosted hydrothermal vent system in the southern Mariana forearc were discovered during a DSV Shinkai 6500 dive in September 2010. We named this system the “Shinkai Seep Field (SSF).” The SSF appears to be a serpentinite-hosted ecosystem within a forearc (convergent margin) setting that is supported by fault-controlled fluid pathways connected to the decollement of the subducting slab. The discovery of the SSF supports the prediction that serpentinite-hosted vents may be widespread on the ocean floor. The discovery further indicates that these serpentinite-hosted low-temperature fluid vents can sustain high-biomass communities and has implications for the chemical budget of the oceans and the distribution of abyssal chemosynthetic life. PMID:22323611

A serpentinite-hosted ecosystem in the Southern Mariana Forearc.

PubMed

Ohara, Yasuhiko; Reagan, Mark K; Fujikura, Katsunori; Watanabe, Hiromi; Michibayashi, Katsuyoshi; Ishii, Teruaki; Stern, Robert J; Pujana, Ignacio; Martinez, Fernando; Girard, Guillaume; Ribeiro, Julia; Brounce, Maryjo; Komori, Naoaki; Kino, Masashi

2012-02-21

Several varieties of seafloor hydrothermal vents with widely varying fluid compositions and temperatures and vent communities occur in different tectonic settings. The discovery of the Lost City hydrothermal field in the Mid-Atlantic Ridge has stimulated interest in the role of serpentinization of peridotite in generating H(2)- and CH(4)-rich fluids and associated carbonate chimneys, as well as in the biological communities supported in highly reduced, alkaline environments. Abundant vesicomyid clam communities associated with a serpentinite-hosted hydrothermal vent system in the southern Mariana forearc were discovered during a DSV Shinkai 6500 dive in September 2010. We named this system the "Shinkai Seep Field (SSF)." The SSF appears to be a serpentinite-hosted ecosystem within a forearc (convergent margin) setting that is supported by fault-controlled fluid pathways connected to the decollement of the subducting slab. The discovery of the SSF supports the prediction that serpentinite-hosted vents may be widespread on the ocean floor. The discovery further indicates that these serpentinite-hosted low-temperature fluid vents can sustain high-biomass communities and has implications for the chemical budget of the oceans and the distribution of abyssal chemosynthetic life.

Influence of the Density Structure of the Caribbean Plate Forearc on the Static Stress State and Asperity Distribution along the Costa Rican Seismogenic Zone

NASA Astrophysics Data System (ADS)

Lücke, O. H.; Gutknecht, B. D.

2014-12-01

Most of the forearc region along the Central American Subduction Zone shows a series of trench-parallel, positive gravity anomalies with corresponding gravity lows along the trench and toward the coast. These features extend from Guatemala to northern Nicaragua. However, the Costa Rican segment of the forearc does not follow this pattern. In this region, the along-trench gravity low is segmented, the coastal low is absent, and the forearc gravity high is located onshore at the Nicoya Peninsula which overlies the seismogenic zone. Geodetic and seismological studies along the Costa Rican Subduction Zone suggest the presence of coupled areas beneath the Nicoya Peninsula prior to the 2012, magnitude Mw 7.6 earthquake. These areas had previously been associated with asperities. Previous publications have proposed a mechanical model for the generation of asperities along the Chilean convergent margin based on the structure of the overriding plate above the seismogenic zone in which dense igneous bodies disturb the state of stress on the seismogenic zone and may influence seismogenic processes. In Costa Rica, surface geology and gravity data indicate the presence of dense basalt/gabbro crust overlying the seismogenic zone where the coupling is present. Bouguer anomaly values in this region reach up to 120×10-5 m/s2, which are the highest for Costa Rica. In this work, the state of stress on the Cocos-Caribbean plate interface is calculated based on the geometry and mass distribution of a 3D density model of the subduction zone as interpreted from gravity data from combined geopotential models. Results show a correlation between the coupled areas at the Nicoya Peninsula and the presence of stress anomalies on the plate interface. The stress anomalies are calculated for the normal component of the vertical stress on the seismogenic zone and are interpreted as being generated by the dense material which makes up the forearc in the area. The dense material of the Nicoya Complex mafic rocks and the topographic load of the peninsula on the seismogenic zone may play a role in the distribution of coupled areas and the seismic behavior of the region since the anomalous normal stress on the plate interface may increase the shear stress threshold for rupture.

An oceanic plateau subduction offshore Eastern Java

NASA Astrophysics Data System (ADS)

Shulgin, A.; Kopp, H.; Mueller, C.; Planert, L.; Lueschen, E.; Flueh, E. R.; Djajadihardja, Y.

2010-12-01

The area offshore Java represents one of a few places globally where the early stage of subduction of an oceanic plateau is observed. We study the little investigated Roo Rise oceanic plateau on the Indian plate, subducting beneath Eurasia.Our study area is located south of eastern Java and covers the edge of the Roo Rise plateau, the Java trench and the entire forearc section. For the first time the detailed deep structure of the Roo Rise is studied, subduction of which has a significant effect on the forearc dynamics and evolution and the increase of the geohazards risks. The tsunamogenic earthquakes of 1994 and 2006 are associated with the oceanic plateau edge been subducted. We present integrated results of a refraction/wide-angle reflection tomography, gravity modeling, and multichannel reflection seismic imaging using data acquired in 2006 along a corridor centered around 113°E and composed of a 340 km long N-S profile and a 130 km long E-W oriented profile. The composite structural models reveal the previously unresolved deep geometry of the collision zone and the structure of the oceanic plateau. The crustal thickness of the Roo Rise plateau is ranging from 18 to 12 km. The structure of the upper crust of the incoming oceanic plate shows the extreme degree of fracturing in its top section, and is associated with a plate bending. The forearc Moho has a depth range from 16 to 20 km. The gravity modeling requires a sharp crustal thickness increase below Java. Within our profiles we do not recover any direct evidence for the presence of the bathymetric features on the oceanic plate currently present below the accretionary prism, responsible for the tsunamogenic earthquake triggering. However vertical variations of the forearc basement edge are observed on the trench-parallel profile, which opens a discussion on the origin of such basement undulations, together with a localized patchy uplift character of the forearc high.The complex geometry of the backstop suggests two models for the structural formation within this segment of the margin. The subducting plateau is affecting the stress field within the accretionary complex and the backstop edge, which favors the initiation of large, potentially tsunamogenic earthquakes such as the 1994 Mw=7.8 tsunamogenic event.

Boninites: Characteristics and tectonic constraints, northeastern Appalachians

USGS Publications Warehouse

Kim, J.; Jacobi, R.D.

2002-01-01

Boninites are high Mg andesites that are thought to form in suprasubduction zone tectonic environments as primary melts from refractory mantle. Boninites provide a potential constraint on tectonic models for ancient terranes that contain boninites because the only unequivocal tectonic setting in which "modern" boninites have been recognized is a fore-arc setting. Tectonic models for "modern" boninite genesis include subduction initiation ("infant arc"), fore-arc spreading, and the forearc side of intra-arc rifting (spreading). These models can be differentiated by the relative age of the boninites and to a lesser degree, geochemistry. The distinctive geochemistry of boninites promotes their recognition in ancient terranes. As detailed in this report, several mafic terranes in the northeastern Appalachians contain boninites; these terranes were situated on both sides of Iapetus. The characteristics of these boninites can be used to constrain tectonic models of the evolution of the northeastern Appalachians. On the Laurentian side of Iapetus, "infant arc" boninites were not produced ubiquitously during the Cambrian subduction initiation, unless sampling problems or minimum age dates obscure a more widespread boninite "infant arc". The Cambrian subduction initiation on the Laurentian side was probably characterized by both "infant arc" boninitic arc construction (perhaps the >496 Ma Hawley Formation and the >488 Ma Betts Cove Ophiolite) and "normal" arc construction (Mt. Orford). This duality is consistent with the suggestion that the pre-collisional geometry of the Laurentian margin was complex. The Bay of Islands Complex and Thetford Mines ophiolite boninites are likely associated with forearc/intra-arc spreading during the protracted evolution of the Cambrian arc system. The relatively young boninites in the Bronson Hill Arc suggest that the Taconic continuous eastward subduction tectonic model is less tenable than other models. On the Gondwana side of Iapetus, the Tea Arm boninites of the Exploits Group stratigraphically rest on arc and MORB volcanics. This stratigraphy, and the relatively young age of the boninites (486 Ma), compared to assumed subduction initiation age (>513 Ma), suggest that the boninites may be more consistent with fore-arc spreading/intra-arc spreading. However, an "infant arc" model cannot be dismissed, and is commonly proposed for the nearby boninites in the Wild Bight Group. ?? 2002 Elsevier Science Ltd. All rights reserved.

Carbonation of subduction-zone serpentinite (high-pressure ophicarbonate; Ligurian Western Alps) and implications for the deep carbon cycling

NASA Astrophysics Data System (ADS)

Scambelluri, Marco; Bebout, Gray E.; Belmonte, Donato; Gilio, Mattia; Campomenosi, Nicola; Collins, Nathan; Crispini, Laura

2016-05-01

Much of the long-term carbon cycle in solid earth occurs in subduction zones, where processes of devolatilization, partial melting of carbonated rocks, and dissolution of carbonate minerals lead to the return of CO2 to the atmosphere via volcanic degassing. Release of COH fluids from hydrous and carbonate minerals influences C recycling and magmatism at subduction zones. Contradictory interpretations exist regarding the retention/storage of C in subducting plates and in the forearc to subarc mantle. Several lines of evidence indicate mobility of C, of uncertain magnitude, in forearcs. A poorly constrained fraction of the 40-115 Mt/yr of C initially subducted is released into fluids (by decarbonation and/or carbonate dissolution) and 18-43 Mt/yr is returned at arc volcanoes. Current estimates suggest the amount of C released into subduction fluids is greater than that degassed at arc volcanoes: the imbalance could reflect C subduction into the deeper mantle, beyond subarc regions, or storage of C in forearc/subarc reservoirs. We examine the fate of C in plate-interface ultramafic rocks, and by analogy serpentinized mantle wedge, via study of fluid-rock evolution of marble and variably carbonated serpentinite in the Ligurian Alps. Based on petrography, major and trace element concentrations, and carbonate C and O isotope compositions, we demonstrate that serpentinite dehydration at 2-2.5 GPa, 550 °C released aqueous fluids triggering breakdown of dolomite in nearby marbles, thus releasing C into fluids. Carbonate + olivine veins document flow of COH fluids and that the interaction of these COH fluids with serpentinite led to the formation of high-P carbonated ultramafic-rock domains (high-P ophicarbonates). We estimate that this could result in the retention of ∼0.5-2.0 Mt C/yr in such rocks along subduction interfaces. As another means of C storage, 1 to 3 km-thick layers of serpentinized forearc mantle wedge containing 50 modal % dolomite could sequester 1.62 to 4.85 Mt C/yr. We stress that lithologically complex interfaces could contain sites of both C release and C addition, further confounding estimates of net C loss at forearc and subarc depths. Sites of C retention, also including carbonate veins and graphite as reduced carbonate, could influence the transfer of slab C to at least the depths beneath volcanic fronts.

Provenance of Miocene submarine fans in the Shikoku Basin: Results from NanTroSEIZE and implications for stratigraphic correlation of subduction inputs

NASA Astrophysics Data System (ADS)

Pickering, K. T.; Underwood, M.; Moore, G. F.

2013-12-01

Seismo-stratigraphy, coring and LWD during IODP Expeditions 319, 322, and 333 (Sites C0011 / C0012) show three Miocene submarine fans in the NE Shikoku Basin, with broadly coeval deposits at ODP Site 1177 and DSDP Site 297, NW Shikoku Basin. Pickering et al. (2013) have shown that the sediment dispersal patterns for these fans have major implications for paleogeographies at that time. The oldest, Middle Miocene Kyushu Fan is the finest grained, has a sheet-like geometry, and was fed by quartz-rich sediment gravity-flows derived mostly from an ancestral landmass in the East China Sea. This likely sediment provenance is further supported by U-Pb zircon and fission track analysis of both zircons and apatites from sediments taken from the forearc and trench of the Nankai Trough, together with rivers from southwest Japan, that point to the influence of the Yangtze River in supplying into the Shikoku Basin prior to rifting of the Okinawa Trough at 10 to 6 Ma (Clift et al. 2013). During prolonged hemipelagic mud deposition at C0011-C0012 (12.2 to 9.1 Ma), sand supply continued at Sites 1177 and 297. Sand delivery to much of the Shikoku Basin, however, probably halted during a phase of sinistral strike-slip and oblique plate motion, after which the Daiichi Zenisu Fan (9.1 to 8.0 Ma) was fed by submarine channels. The youngest fan (Daini Zenisu; 8.0 to 7.6 Ma) has sheet-like geometry with thick-bedded, coarse-grained pumiceous sandstones. The pumice fragments were fed from a mixed provenance that included the collision zone of the Izu-Bonin and Honshu arcs. The shift from channelized to sheet-like flows was probably favored by renewal of relatively rapid northward subduction, which accentuated the trench as a bathymetric depression. Understanding the stratigraphic position and 3-D geometry of the sandbodies has important implications for stratigraphic correlation throughout the northern Shikoku Basin, together with subduction-related processes, including the potential for focused fluid flow and fluid overpressures above and below the plate-boundary fault. References Pickering, K.T., Underwood, M.B., Saito, S., Naruse, H., Kutterolf, S., Scudder, R., Park, J.-O., Moore, G.F. & Slagle, A. 2013. Geochemistry, Geophysics, Geosystems, 14, doi:10.1002/ggge.20107 Clift, P.D., Carter, A., Nicholson, U. & Masago, H. 2013. Tectonics, doi: 10.1002/tect.20033

The Dauki Fault and its Shillong-Sylhet Thrust Anticline-Foredeep Pair: A Footwall Reactivation along the Progressive Burma-India Collision

NASA Astrophysics Data System (ADS)

Seeber, L.; Ferguson, E. K.; Grall, C.; Steckler, M. S.; Betka, P. M.; Akhter, S. H.

2016-12-01

The Shillong Massif and the Sylhet basin form a south-verging anticline-foredeep pair associated with the E-W striking Dauki fault. Fold geometry and receiver-functions identify it as a blind thrust fault dipping north into the craton. This contractional structure may represent an incipient forward jump of the Himalayan front to the trailing margin of India. The Shillong Massif is one of the largest known basement-cored anticlines and is delineated by a relict erosional surface and folded strata. Where best exposed in the central segment, it has a steep southern limb and a gentle northern limb. This asymmetry is mirrored in the Sylhet foredeep, with a steep north flank and low dip south flank. The combined structure has 5 km of relief, most of which developed during the Quaternary. This foredeep overprints a thicker sequence that records the progradation of the Brahmaputra delta. These older strata thicken southward as expected at a passive margin. The Sylhet Traps, which are coeval with India-Antarctica rifting, outcrop along the southern limb of the anticline. Associated basalt dikes are also parallel to the E-W Dauki structure. The basal Cretaceous-Paleogene shallow marine strata onlap northward the regional unconformity above the cratonic and trap rocks. This suggests that the Dauki thrust front traces an E-W segment of the passive margin and former rift. The IndoBurma forearc overrides the Dauki structure 200 km farther west on the foredeep (south) side than on the massif (north) side of the Dauki fault. Much of this differential advance of the Burma deformation front predates the Dauki foredeep and was a response to the shape of the passive margin of India. This deformation front, known locally as the Haflong Fault, crosses obliquely the Dauki thrust front. Evidence includes contractional structures verging up-dip onto the forelimb of the Shillong anticline. The Shillong Massif-Sylhet Foredeep pair has a strong gravity signature that can be traced eastward across most of the IndoBurma Ranges. Correlated topography and drainage features, including the Imphal intramountain basin, and a drainage switch from northward to southward across this basin suggest that this entire gravity anomaly reflects differential uplift along the eastward continuation of the buried Dauki fault and not just a buried passive margin.

Early Tertiary exhumation of the flank of a forearc basin, southwest Talkeetna Mountains, Alaska

USGS Publications Warehouse

Bleick, Heather A.; Till, Alison B.; Bradley, Dwight C.; O’Sullivan, Paul; Wooden, Joe L.; Bradley, Dan B.; Taylor, Theresa A.; Friedman, Sam B.; Hults, Chad P.

2012-01-01

New geochronologic and thermochronologic data from rocks near Hatcher Pass, southwest Talkeetna Mountains, Alaska, record earliest Paleocene erosional and structural exhumation on the flank of the active Cook Inlet forearc basin. Cretaceous plutons shed sediments to the south, forming the Paleocene Arkose Ridge Formation. A Paleocene(?)-Eocene detachment fault juxtaposed ~60 Ma metamorphic rocks with the base of the Arkose Ridge Formation. U-Pb (analyzed by Sensitive High Resolution Ion Micro Probe Reverse Geometry (SHRIMP-RG)) zircon ages of the Cretaceous plutons, more diverse than previously documented, are 90.3±0.3 (previously considered a Jurassic unit), 79.1±1.0, 76.1±0.9, 75.8±0.7, 72.5±0.4, 71.9±0.3, 70.5±0.2, and 67.3±0.2 Ma. The cooling of these plutons occurred between 72 and 66 Ma (zircon fission track (FT) closure ~225°C). 40Ar/39Ar analyses of hornblende, white mica, and biotite fall into this range (Harlan and others, 2003). New apatite FT data collected on a west-to-east transect reveal sequential exhumation of fault blocks at 62.8±2.9, 54±2.5, 52.6±2.8, and 44.4±2.2 Ma. Plutonic clasts accumulated in the Paleocene Arkose Ridge Formation to the south. Detrital zircon (DZ) ages from the formation reflect this provenance: a new sample yielded one grain at 61 Ma, a dominant peak at 76 Ma, and minor peaks at 70, 80, 88, and 92 Ma. The oldest zircon is 181 Ma. Our apatite FT ages range from 35.1 to 50.9 Ma. Greenschist facies rocks now sit structurally between the plutonic rocks and the Arkose Ridge Formation. They are separated from plutonic rocks by the vertical Hatcher Pass fault and from the sedimentary rocks by a detachment fault. Ar cooling ages (Harlan and others, 2003) and new zircon FT ages for these rocks are concordant at 61-57 Ma, synchronous with deposition of the Arkose Ridge Formation. A cooling age of ~46 Ma came from one apatite FT sample. The metamorphic protolith (previously considered Jurassic) was deposited at or after 75 Ma based on new DZ data. The probability curve has a major peak from 76 to 102 Ma, minor peaks at 186, 197, 213, 303, 346, and 1,828, and two discordant grains at ~2,700 Ma. This is similar to DZ populations in the Valdez Group. The short period of time between deposition, metamorphism, and exhumation are consistent with metamorphism in a subduction-zone setting. Ductile and brittle structures in the metamorphic rocks are consistent with exhumation in a transtensional setting.

Biogenic Methane Generation Potential in the Eastern Nankai Trough, Japan: Effect of Reaction Temperature and Total Organic Carbon

NASA Astrophysics Data System (ADS)

Aung, T. T.; Fujii, T.; Amo, M.; Suzuki, K.

2017-12-01

Understanding potential of methane flux from the Pleistocene fore-arc basin filled turbiditic sedimentary formation along the eastern Nankai Trough is important in the quantitative assessment of gas hydrate resources. We considered generated methane could exist in sedimentary basin in the forms of three major components, and those are methane in methane hydrate, free gas and methane dissolved in water. Generation of biomethane strongly depends on microbe activity and microbes in turn survive in diverse range of temperature, salinity and pH. This study aims to understand effect of reaction temperature and total organic carbon on generation of biomethane and its components. Biomarker analysis and cultural experiment results of the core samples from the eastern Nankai Trough reveal that methane generation rate gets peak at various temperature ranging12.5°to 35°. Simulation study of biomethane generation was made using commercial basin scale simulator, PetroMod, with different reaction temperature and total organic carbon to predict how these effect on generation of biomethane. Reaction model is set by Gaussian distribution with constant hydrogen index and standard deviation of 1. Series of simulation cases with peak reaction temperature ranging 12.5°to 35° and total organic carbon of 0.6% to 3% were conducted and analyzed. Simulation results show that linear decrease in generation potential while increasing reaction temperature. But decreasing amount becomes larger in the model with higher total organic carbon. At higher reaction temperatures, >30°, extremely low generation potential was found. This is due to the fact that the source formation modeled is less than 1 km in thickness and most of formation do not reach temperature more than 30°. In terms of the components, methane in methane hydrate and free methane increase with increasing TOC. Drastic increase in free methane was observed in the model with 3% of TOC. Methane amount dissolved in water shows almost same for all models.

NanTroSEIZE observatories: Installation of a long-term borehole monitoring systems offshore the Kii Peninsula, Japan

NASA Astrophysics Data System (ADS)

Kopf, A.; Saffer, D. M.; Davis, E. E.; Araki, E.; Kinoshita, M.; Lauer, R. M.; Wheat, C. G.; Kitada, K.; Kimura, T.; Toczko, S.; Eguchi, N. O.; Science Parties, E.

2010-12-01

The IODP Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) is a multi-expedition drilling program designed to investigate fault mechanics, fault slip behavior, and strain accumulation along subduction megathrusts, through coring, logging, and long-term monitoring experiments. One key objective is the development and installation of a borehole observatory network extending from locations above the outer, presumably aseismic accretionary wedge to the seismogenic and interseismically locked plate interface, to record seismicity and slip transients, monitor strain accumulation, document hydraulic transients associated with deformation events, and quantify in situ pore fluid pressure and temperature. As part of recent NanTroSEIZE operations, borehole instruments have been developed for deployment at two sites: (1) Site C0010, which penetrates a major out-of-sequence thrust fault termed the “megasplay” at ca. 400 mbsf, and (2) Site C0002 in the Kumano forearc basin at a location that overlies both the updip edge of the inferred interseismically locked portion of the plate interface, and clusters of very low frequency thrust and reverse earthquakes located within the accretionary prism and potentially on the megasplay fault. In 2009, Site C0010 was drilled and cased with screens to access the megasplay fault, and a simple pore pressure and temperature monitoring system (a ”smartplug”) was installed. The simple observatory unit includes pressure and temperature sensors and a data logging package mounted beneath a mechanically set retrievable casing packer, and includes two pressure sensors, one in hydraulic communication with the formation through the casing screens below the packer, and the other to the open borehole above the packer to record hydrostatic reference pressure and ocean loading signals. Temperatures are recorded within the instrument package using a platinum thermometer and by a self-contained miniature temperature logger (MTL). In fall 2010, the smartplug will be retrieved and replaced with an upgraded instrument package that also includes an autonomous osmotic geochemical sampling system and microbial colonization experiment. Fall 2010 operations will also drill and case Site C0002 to ca. 1000 m depth and install a newly developed multi-sensor permanent observatory system, which includes a volumetric strainmeter, a broadband seismometer, tiltmeter, thermister string, and multi-level pore-pressure sensors. The strain, seismometer, and tilt sensors will be cemented with the basal mudstones of the Kumano basin, and pore pressure will be monitored within both the underlying accretionary prism and within the lower basin sediments. The observatory will ultimately be connected to the seafloor fiber-optic cable network DONET. Here, we report on the retrieval of the smartplug, installation and configuration of the new multi-sensor permanent observatory, and preliminary data obtained from the smartplug deployment.

Paleogene and Neogene magmatism in the Valle del Cura region: New perspective on the evolution of the Pampean flat slab, San Juan province, Argentina

NASA Astrophysics Data System (ADS)

Litvak, Vanesa D.; Poma, Stella; Kay, Suzanne Mahlburg

2007-09-01

The Valle del Cura region is characterized by a thick volcanic and volcaniclastic sequence that records the Tertiary arc and backarc magmatic evolution of the Argentine Main Cordillera over the modern Pampean flatslab at 29.5-30°S. During the Eocene, a retroarc basin developed, represented by the Valle del Cura Formation synorogenic volcanosedimentary sequence, which includes rhyolites and dacitic tuffs. These silicic volcanic rocks have weak arc chemical signatures and high lithophile element concentrations and are isotopically enriched relative to the late Oligocene-early Miocene volcanic rocks that followed them. Their chemical characteristics fit with eruption through a thin crust. The Valle de Cura Formation was followed by the Oligocene-early Miocene Doña Ana Group volcanic sequence, which erupted at and near the arc front west of the border with Chile. The Doña Ana Group volcanic rocks have calc-alkaline chemical characteristics consistent with parental magmas forming in a mantle wedge and erupting through a normal thickness crust (35 km). Subsequent shallowing of the downgoing Nazca plate caused the volcanic front to migrate eastward. The volcanic sequences of the middle Miocene Cerro de las Tórtolas Formation erupted at this new arc front, essentially at the Argentine border. Two stages are recognized: an older one (16-14 Ma) in which magmas appear to have erupted through a normal thickness crust (30-35 km) and a younger one (13-10 Ma) in which the steeper REE pattern suggests the magmas last equilibrated with higher pressure residual mineral assemblages in a thicker crust. Isotopic ratios in the younger group are consistent with an increase in original crustal components and crust introduced into the mantle source by forearc subduction erosion. A peak in forearc subduction erosion near 12-10 Ma is consistent with when the main part of the Juan Fernandez Ridge began to subduct beneath the region. In addition to late Miocene Tambo Formation dacitic ignimbrites, the younger Cerro de las Tórtolas Formation volcanic rocks erupted at the height of contractional deformation in the Valle del Cura and to the east. The last important volcanic sequence to erupt in the Valle del Cura is the late Miocene Vacas Heladas Ignimbrite, the most isotopically enriched Tertiary magmas in the Valle del Cura that contain the highest proportion of crustal components. Subsequently volcanism ceased in the region in response to shallowing of the subduction zone.

Tertiary evolution of the Shimanto belt (Japan): A large-scale collision in Early Miocene

NASA Astrophysics Data System (ADS)

Raimbourg, Hugues; Famin, Vincent; Palazzin, Giulia; Yamaguchi, Asuka; Augier, Romain

2017-07-01

To decipher the Miocene evolution of the Shimanto belt of southwestern Japan, structural and paleothermal studies were carried out in the western area of Shikoku Island. All units constituting the belt, both in its Cretaceous and Tertiary domains, are in average strongly dipping to the NW or SE, while shortening directions deduced from fault kinematics are consistently orientated NNW-SSE. Peak paleotemperatures estimated with Raman spectra of organic matter increase strongly across the southern, Tertiary portion of the belt, in tandem with the development of a steeply dipping metamorphic cleavage. Near the southern tip of Ashizuri Peninsula, the unconformity between accreted strata and fore-arc basin, present along the whole belt, corresponds to a large paleotemperature gap, supporting the occurrence of a major collision in Early Miocene. This tectonic event occurred before the magmatic event that affected the whole belt at 15 Ma. The associated shortening was accommodated in two opposite modes, either localized on regional-scale faults such as the Nobeoka Tectonic Line in Kyushu or distributed through the whole belt as in Shikoku. The reappraisal of this collision leads to reinterpret large-scale seismic refraction profiles of the margins, where the unit underlying the modern accretionary prism is now attributed to an older package of deformed and accreted sedimentary units belonging to the Shimanto belt. When integrated into reconstructions of Philippine Sea Plate motion, the collision corresponds to the oblique collision of a paleo Izu-Bonin-Mariana Arc with Japan in Early Miocene.

The large Bonin deep Event of 30 May 2015: Seismogenesis in a Detached and Fragmented Slab

NASA Astrophysics Data System (ADS)

Okal, Emile; Kirby, Stephen H.

2016-04-01

The earthquake of 30 May 2015 in the Bonin Island was exceptional in many respects: it was the fifth largest deep earthquake ever recorded (7.8 E27 dyn*cm; Mw = 7.9); at h = 680 km, it was 100 km deeper than any known event in that subduction zone and 150 km distant from its nearest neighbor (including relocated historical events dating back to the 1920s); it was displaced as much as 150 km East of the prolongation of the mapped Wadati-Benioff Zone; and finally its focal mechanism was close to the opposite of the down-dip compression prevailing for the deepest known earthquakes. Other cases of "detached" deep earthquakes occurring in highwavespeed, high-Q slab material, have been described in front of subduction zones, notably by Fukao et al. [19092], Van der Hilst et al. [1993] aand Okal [2001]. The geometry of the 2015 Bonin event is reminiscent of that of the cluster of (much smaller) seismic events beneath the North Fiji Basin, which appear be unrelated to presently active W-B systems, but rather express seismogenesis in detached or fragmented slab material that has foundered to the bottom of the transition zone [Kirby et al., 1996; Okal and Kirby, 1998], where stresses may be generated by heterogeneous volume changes associated with the metastable olivine-spinel metamorphic reaction. How and why slab fragments become detached has been suggested to possibly involve collisions of oceanic plateaux or island arcs with oceanic forearcs, leading to arc reversal and/or fragmentation of normal oceanic and plateau lithosphere. In this context, the Igasawara Plateau is currently colliding with the Bonin forearc just to the South of the 2015 deep event. The Bonin Ridge to the North may represent a section of thick remnant crust that otherwise detached from its slab and later foundered in the mantle all the way to the bottom of the transition zone, stagnating to this day in the source region of the 2015 shock.

Crustal motion studies in the southwest Pacific: Geodetic measurements of plate convergence in Tonga, Vanuatu and the Solomon Islands

NASA Astrophysics Data System (ADS)

Phillips, David A.

The southwest Pacific is one of the most tectonically dynamic regions on Earth. This research focused on crustal motion studies in three regions of active Pacific-Australia plate convergence in the southwest Pacific: Tonga, the New Hebrides (Vanuatu) and the Solomons Islands. In Tonga, new and refined velocity estimates based on more than a decade of Global Positioning System (GPS) measurements and advanced analysis techniques are much more accurate than previously reported values. Convergence rates of 80 to 165 mm/yr at the Tonga trench represent the fastest plate motions observed on Earth. For the first time, rotation of the Fiji platform relative to the Australian plate is observed, and anomalous deformation of the Tonga ridge was also detected. In the New Hebrides, a combined GPS dataset with a total time series of more than ten years led to new and refined velocity estimates throughout the island arc. Impingement of large bathymetric features has led to arc fragmentation, and four distinct tectonic segments are identified. The central New Hebrides arc segment is being shoved eastward relative to the rest of the arc as convergence is partitioned between the forearc (Australian plate) and the backarc (North Fiji Basin) boundaries due to impingement of the d'Entrecasteaux Ridge and associated Bougainville seamount. The southern New Hebrides arc converges with the Australian plate more rapidly than predicted due to backarc extension. The first measurements of convergence in the northern and southernmost arc segments were also made. In the Solomon Islands, a four-year GPS time series was used to generate the first geodetic estimates of crustal velocity in the New Georgia Group, with 57--84 mm/yr of Australia-Solomon motion and 19--39 mm/yr of Pacific-Solomon motion being observed. These velocities are 20--40% lower than predicted Australia-Pacific velocities. Two-dimensional dislocation models suggest that most of this discrepancy can be attributed to locking of the San Cristobal trench and elastic strain accumulation in the forearc. Anomalous motion at Simbo island is also observed.

Late Cenozoic extensional faulting in Central-Western Peloponnesus, Greece

NASA Astrophysics Data System (ADS)

Skourtsos, E.; Fountoulis, I.; Mavroulis, S.; Kranis, H.

2012-04-01

A series of forearc-dipping, orogen-parallel extensional faults are found in the central-western Peloponnesus, (south-western Aegean) which control the western margin of Mt Mainalon. The latter comprises HP/LT rocks of the Phyllites-Quartzites Unit (PQ), overlain by the carbonates and flysch of the Tripolis Unit while the uppermost nappe is the Pindos Unit, a sequence of Mesozoic pelagic sequence, topped by a Paleocene flysch. Most of the extensional structures were previously thought of as the original thrust between the Pindos and Tripolis Units. However, the cross-cutting relationships among these structures indicate that these are forearc (SW-dipping) extensional faults, downthrowing the Pindos thrust by a few tens or hundreds of meters each, rooting onto different levels of the nappe pile. In SW Mainalon the lowermost of the extensional faults is a low-angle normal fault dipping SW juxtaposing the metamorphic rocks of the PQ Unit against the non-metamorphic sequence of the Tripolis Unit. High-angle normal faults, found further to the west, have truncated or even sole onto the low-angle ones and control the eastern margin of the Quaternary Megalopolis basin. All these extensional structures form the eastern boundary of a series of Neogene-Quaternary tectonic depressions, which in turn are separated by E-W horsts. In the NW, these faults are truncated by NE to NNE-striking, NW-dipping faults, which relay the whole fault activity to the eastern margin of the Pyrgos graben. The whole extensional fault architecture has resulted (i) in the Pindos thrust stepping down from altitudes higher than 1000 m in Mainalon in the east, to negative heights in North Messinia and Southern Ilia in the west; and (ii) the gradual disappearance of the Phyllite-Quartzite metamorphics of Mainalon towards the west. The combination of these extensional faults (which may reach down to the Ionian décollement) with the low-angle floor thrusts of the Pindos, Tripolis and Ionian Units leads to additional ENE-WSW shortening, normal to the Hellenic Arc, west of the Peloponnesus.

Seismic evidence for flow in the hydrated mantle wedge of the Ryukyu subduction zone

PubMed Central

Nagaya, Takayoshi; Walker, Andrew M.; Wookey, James; Wallis, Simon R.; Ishii, Kazuhiko; Kendall, J. -Michael

2016-01-01

It is widely accepted that water-rich serpentinite domains are commonly present in the mantle above shallow subducting slabs and play key roles in controlling the geochemical cycling and physical properties of subduction zones. Thermal and petrological models show the dominant serpentine mineral is antigorite. However, there is no good consensus on the amount, distribution and alignment of this mineral. Seismic velocities are commonly used to identify antigorite-rich domains, but antigorite is highly-anisotropic and depending on the seismic ray path, its properties can be very difficult to distinguish from non-hydrated olivine-rich mantle. Here, we utilize this anisotropy and show how an analysis of seismic anisotropy that incorporates measured ray path geometries in the Ryukyu arc can constrain the distribution, orientation and amount of antigorite. We find more than 54% of the wedge must consist of antigorite and the alignment must change from vertically aligned to parallel to the slab. This orientation change suggests convective flow in the hydrated forearc mantle. Shear wave splitting analysis in other subduction zones indicates large-scale serpentinization and forearc mantle convection are likely to be more widespread than generally recognized. The view that the forearc mantle of cold subduction zones is dry needs to be reassessed. PMID:27436676

Late Quaternary uplift rate across the Shimokita peninsula, northeastern Japan forearc

NASA Astrophysics Data System (ADS)

Matsu'Ura, T.

2009-12-01

I estimated the late Quaternary uplift rate across the northeastern Japan forearc (Shimokita peninsula) by using the height distribution of MIS 5.5 marine terraces as determined from tephra and cryptotephra stratigraphy. The heights of inner-margins (shoreline angles) of the MIS 5.5 marine terrace surface were previously reported to be 43-45 m and 30 m around Shiriyazaki and Gamanosawa, respectively. These heights decrease westward and are possibly due to a west-dipping offshore fault. But in some places, the heights of terrace inner-margins are probably overestimated by thick sediments. I found the MIS 5.5 wave-cut platform which is overlain by gravels and loess deposits containing a basal Toya tephra horizon (MIS 5.4) at Shiriyazaki by boring. The MIS 5.5 wave-cut platform (paleo sea level) is about 25 m above sea level, nearly half of the reported height of the terrace inner-margin. My result shows that the late Quaternary uplift rate across the Shimokita peninsula should be reconsidered. Further studies are also required whether or not the intra-plate (offshore) fault is a factor of the forearc uplifting at the peninsula. This research project has been conducted under the research contract with Nuclear and Industrial Safety Agency (NISA).

Seismic evidence for flow in the hydrated mantle wedge of the Ryukyu subduction zone.

PubMed

Nagaya, Takayoshi; Walker, Andrew M; Wookey, James; Wallis, Simon R; Ishii, Kazuhiko; Kendall, J-Michael

2016-07-20

It is widely accepted that water-rich serpentinite domains are commonly present in the mantle above shallow subducting slabs and play key roles in controlling the geochemical cycling and physical properties of subduction zones. Thermal and petrological models show the dominant serpentine mineral is antigorite. However, there is no good consensus on the amount, distribution and alignment of this mineral. Seismic velocities are commonly used to identify antigorite-rich domains, but antigorite is highly-anisotropic and depending on the seismic ray path, its properties can be very difficult to distinguish from non-hydrated olivine-rich mantle. Here, we utilize this anisotropy and show how an analysis of seismic anisotropy that incorporates measured ray path geometries in the Ryukyu arc can constrain the distribution, orientation and amount of antigorite. We find more than 54% of the wedge must consist of antigorite and the alignment must change from vertically aligned to parallel to the slab. This orientation change suggests convective flow in the hydrated forearc mantle. Shear wave splitting analysis in other subduction zones indicates large-scale serpentinization and forearc mantle convection are likely to be more widespread than generally recognized. The view that the forearc mantle of cold subduction zones is dry needs to be reassessed.

187Os/188Os of boninites from the Izu-Bonin-Mariana forearc, IODP Exp 352

NASA Astrophysics Data System (ADS)

Niles, D. E.; Nelson, W. R.; Reagan, M. K.; Pearce, J. A.; Godard, M.; Shervais, J. W.

2016-12-01

The Izu-Bonin-Mariana (IBM) subduction zone is an ideal laboratory in which to study the evolution of a subduction zone from its initiation to the development of modern-day arc volcanism. Boninite lavas were produced in the IBM forearc region during the early stages of subduction and are thought to have been generated by flux melting the previously depleted mantle wedge. Mariana forearc mantle peridotites record unradiogenic 187Os/188Os signatures (0.1193-0.1273) supporting the existence of variably depleted mantle in this region (Parkinson et al., 1998). In order to understand the connection between the regional mantle, slab-derived fluids, and the generation of boninites, Re-Os isotopic data were measured on subset of boninite-series lavas obtained during IODP Expedition 352. Preliminary age-corrected (48 Ma) 187Os/188Os isotopic data for boninite-series lavas (sites U1439C and U1442A) are unradiogenic to modestly radiogenic (0.1254-0.1390) compared to primitive mantle (0.1296), consistent with Os isotopic data from boninite sands from the Bonin Islands (0.1279-0.1382; Suzuki et al., 2011). The least radiogenic boninites have 187Os/188Os (< 0.1296) values consistent with average MORB mantle recorded globally by abyssal peridotites (0.1238 ± 0.0042; Rudnick & Walker, 2009). However, boninite lavas were not derived from the most refractory ancient mantle recorded by Mariana peridotites. Unradiogenic boninites generally have higher Os abundances (0.043-0.567 ppb), whereas more radiogenic boninites have low Os abundances (0.015-0.036). Due to their low Os abundances, the moderately radiogenic isotopic signatures may be the result of interaction with highly radiogenic seawater or incorporation of radiogenic sediment (e.g. Suzuki et al. 2011). However, the radiogenic values could also be the result of fluid flux from the subducting Pacific plate.

Small-scale Forearc Structure from Residual Bathymetry and Vertical Gravity Gradients at the Cocos-North America Subduction Zone offshore Mexico

NASA Astrophysics Data System (ADS)

Garcia, E. S. M.; Ito, Y.

2017-12-01

The subduction of topographic relief on the incoming plate at subduction zones causes deformation of the plate interface as well as the overriding plate. Whether the resulting geometric irregularities play any role in inhibiting or inducing seismic rupture is a topic of relevance for megathrust earthquake source studies. A method to discern the small-scale structure at subduction zone forearcs was recently developed by Bassett and Watts (2015). Their technique constructs an ensemble average of the trench-perpendicular topography, and the removal of this regional tectonic signal reveals the short-wavelength residual bathymetric anomalies. Using examples from selected areas at the Tonga, Mariana, and Japan subduction zones, they were able to link residual bathymetric anomalies to the subduction of seamount chains, given the similarities in wavelength and amplitude to the morphology of seamounts that have yet to subduct. We focus here on an analysis of forearc structures found in the Mexico segment of the Middle America subduction zone, and their potential mechanical interaction with areas on the plate interface that have been previously identified as source regions for earthquake ruptures and aseismic events. We identified several prominent residual bathymetric anomalies off the Guerrero and Oaxaca coastlines, mainly in the shallow portion of the plate interface and between 15 and 50 kilometers away from the trench axis. The residual amplitude of these bathymetric anomalies is typically in the hundreds of meters. Some of the residual bathymetric anomalies offshore Oaxaca are found landward of seamount chains on the incoming Cocos Plate, suggesting that these anomalies are associated with the prior subduction of seamounts at the margin. We also separated the residual and regional components of satellite-based vertical gravity gradient data using a directional median filter to isolate the possible gravity signals from the seamount edifices.

Multibeam bathymetric survey of the Ipala Submarine Canyon, Jalisco, Mexico (20°N): The southern boundary of the Banderas Forearc Block?

NASA Astrophysics Data System (ADS)

Urías Espinosa, J.; Bandy, W. L.; Mortera Gutiérrez, C. A.; Núñez Cornú, Fco. J.; Mitchell, N. C.

2016-03-01

The Middle America Trench bends sharply northward at 20°N. This, along with the close proximity of the Rivera-North America Euler pole to the northern end of this trench, sharply increases the obliquity of subduction at 20°N. By analogy with other subduction zones with similar sharply changing obliquity, significant trench parallel extension is expected to exist in the forearc region near the bend. To evaluate this possibility, multibeam bathymetric, seafloor backscatter and sub-bottom seismic reflection data were collected in this area during the MORTIC08 campaign of the B.O. El Puma. These data image in detail a large submarine canyon (the Ipala Canyon) extending from the coast at 20°05‧N to the Middle America Trench at 19°50‧N. This canyon is 114 km long and is fed by sediments originating from two, possibly three, small rivers: the Ipala, Tecolotlán and Maria Garza. This canyon deeply incises (up to 600 m) the entire continental slope and at least the outer part of the shelf. Within the canyon, we observe meanders and narrow channels produced by turbidity flows indicating that the canyon is active. In the marginal areas of the canyon slumps, rills, and uplifts suggest that mass movements and fluid flow have had a major impact on the seafloor morphology. The seafloor bathymetry, backscatter images and sub-bottom reflection profiles evidence the tectonic processes occurring in this area. Of particular interest, the canyon is deflected by almost 90° at three locations, the deflections all having a similar azimuth of between 125° and 130°. Given the prominence and geometry of this canyon, along with its tectonic setting, we propose that the presence of the canyon is related to extension produced by the sharp change in the plate convergence. If so, the canyon may lie along the southeast boundary of a major forearc block (the Banderas Forearc Block).

P-wave Velocity Structure Across the Mariana Trench and Implications for Hydration

NASA Astrophysics Data System (ADS)

Eimer, M. O.; Wiens, D.; Lizarralde, D.; Cai, C.

2017-12-01

Estimates of the water flux at subduction zones remain uncertain, particularly the amount of water brought into the trench by the subducting plate. Normal faulting related to the bending of the incoming plate has been proposed to provide pathways for water to hydrate the crust and upper mantle. A passive and active source seismic experiment spanning both the incoming plate and forearc was conducted in 2012 in central Mariana to examine the role of hydration at subduction zones. The active-source component of the survey used the R/V M.G. Langsethairgun array and 68 short period sensors, including suspended hydrophones, deployed on 4 transects. This study at the Mariana trench offers a comparison to related studies of incoming plate hydration in Middle America, where differing thermal structures related to plate age predict different stability fields for hydrous minerals. The forearc structure is also of interest, since Mariana is characterized by large serpentine seamounts and may have a serpentinized mantle wedge. The velocity structure will also be important for the relocation of earthquakes in the incoming plate, since the seismicity can offer a constraint for the depth extent of these bending faults. We examine the P-wave velocity structure along a 400-km long wide-angle refraction transect perpendicular to the trench and spanning both the forearc and incoming plate. Preliminary results indicate a velocity reduction in the crust and uppermost mantle at the bending region of the incoming plate, relative to the plate's structure away from the trench. This reduction suggests that outer-rise faults extend into the upper mantle and may have promoted serpentinization of that material. Mantle Pn refraction phases are not observed in the forearc, consistent with the ambient noise tomography results that show upper-mantle velocities similar to that of the lower crust. The lack of contrast between the upper mantle and crustal velocities from the ambient noise has been interpreted to indicate extensive serpentinization of the shallow mantle wedge.

Marine geology of the Forearc region, southern Mariana Island arc

NASA Astrophysics Data System (ADS)

Karig, D. E.; Ranken, Beverly

The Mariana Arc serves as a type example of an oceanic arc system because of its long history without a continental influence and because of the large suite of data collected from that area. The concentration of deep-sea drilling and related survey data near 18°N has been interpreted in support of subsidence and narrowing of the forearc with time as a result of tectonic erosion. On the contrary, interpretation of a lesser concentration of data from the south end of the arc presented here suggests growth and relative uplift of the lower trench slope. Truncation of all forearc elements occurs south of 13°N, probably as a result of strike slip faulting along east-west fractures that define a transform between the back arc spreading ridge and the trench. North of 13°30'N the inner trench slope is ribbed with ridges that trend parallel to or convex toward the trench. These ridges are largest and perhaps most structurally active at the base of the trench slope. Depositional depth of sediments in Deep Sea Drilling Project holes drilled in the upper slope apron, concave upward slopes of this apron, which trap turbidites, and internal arcward fanning of deeper apron strata are cited in support of relative uplift and arcward rotation of the seaward part of the inner slope and of minor absolute uplift of the sediment apron. This pattern of vertical displacement and rotation, coupled with progressive downlap rather than truncation of apron strata, argues against tectonic erosion and subsidence. The conflicting data may be a result of changing response of the arc over time. Forearc volcanism and tectonic disruption of the basement beneath the upper slope apparently ceased by the early Oligocene. Younger features are more compatible with intermittent accretion of oceanic material, possibly tectonically mixed into the arc basement.

Ultramafic clasts from the South Chamorro serpentine mud volcano reveal a polyphase serpentinization history of the Mariana forearc mantle

NASA Astrophysics Data System (ADS)

Kahl, Wolf-Achim; Jöns, Niels; Bach, Wolfgang; Klein, Frieder; Alt, Jeffrey C.

2015-06-01

Serpentine seamounts located on the outer half of the pervasively fractured Mariana forearc provide an excellent window into the forearc devolatilization processes, which can strongly influence the cycling of volatiles and trace elements in subduction zones. Serpentinized ultramafic clasts recovered from an active mud volcano in the Mariana forearc reveal microstructures, mineral assemblages and compositions that are indicative of a complex polyphase alteration history. Petrologic phase relations and oxygen isotopes suggest that ultramafic clasts were serpentinized at temperatures below 200 °C. Several successive serpentinization events represented by different vein generations with distinct trace element contents can be recognized. Measured in situ Rb/Cs ratios are fairly uniform ranging between 1 and 10, which is consistent with Cs mobilization from sediments at lower temperatures and lends further credence to the low-temperature conditions proposed in models of the thermal structure in forearc settings. Late veins show lower fluid mobile element (FME) concentrations than early veins, suggesting a decreasing influence of fluid discharge from the subducting slab on the composition of the serpentinizing fluids. The continuous microfabric and mineral chemical evolution observed in the ultramafic clasts may have implications as to the origin and nature of the serpentinizing fluids. We hypothesize that opal and smectite dehydration produce quartz-saturated fluids with high FME contents and Rb/Cs between 1 and 4 that cause the early pervasive serpentinization. The partially serpentinized material may then be eroded from the basal plane of the suprasubduction mantle wedge. Serpentinization continued but the interacting fluids did not carry a pronounced sedimentary signature, either because FMEs were no longer released from the slab, or due to an en route loss of FMEs. Late chrysotile veins that document the increased access of fluids in a now fluid-dominated regime are characterized by reduced trace element contents with a slightly increased Rb/Cs ratio near 10. This lack of sediment-dominated geochemical signatures consistently displayed in all late serpentinization stages may indicate that the sediment-derived fluids have been completely reset (i.e. the FME excesses were removed) by continued water-rock reaction within the subduction channel. The final stage of buoyant rise of matrix and clasts in the conduits is characterized by brucite-dominated alteration of the clasts from the clast rim inward (independent of the intra-clast fabric relations), which corresponds to re-equilibration with alkaline, low-silica activity fluids in the rising mud.

Accretionary orogens through Earth history

USGS Publications Warehouse

Cawood, Peter A.; Kroner, A.; Collins, W.J.; Kusky, T.M.; Mooney, W.D.; Windley, B.F.

2009-01-01

Accretionary orogens form at intraoceanic and continental margin convergent plate boundaries. They include the supra-subduction zone forearc, magmatic arc and back-arc components. Accretionary orogens can be grouped into retreating and advancing types, based on their kinematic framework and resulting geological character. Retreating orogens (e.g. modern western Pacific) are undergoing long-term extension in response to the site of subduction of the lower plate retreating with respect to the overriding plate and are characterized by back-arc basins. Advancing orogens (e.g. Andes) develop in an environment in which the overriding plate is advancing towards the downgoing plate, resulting in the development of foreland fold and thrust belts and crustal thickening. Cratonization of accretionary orogens occurs during continuing plate convergence and requires transient coupling across the plate boundary with strain concentrated in zones of mechanical and thermal weakening such as the magmatic arc and back-arc region. Potential driving mechanisms for coupling include accretion of buoyant lithosphere (terrane accretion), flat-slab subduction, and rapid absolute upper plate motion overriding the downgoing plate. Accretionary orogens have been active throughout Earth history, extending back until at least 3.2 Ga, and potentially earlier, and provide an important constraint on the initiation of horizontal motion of lithospheric plates on Earth. They have been responsible for major growth of the continental lithosphere through the addition of juvenile magmatic products but are also major sites of consumption and reworking of continental crust through time, through sediment subduction and subduction erosion. It is probable that the rates of crustal growth and destruction are roughly equal, implying that net growth since the Archaean is effectively zero. ?? The Geological Society of London 2009.

Noble gas isotopes in mineral springs within the Cascadia Forearc, Wasihington and Oregon

USGS Publications Warehouse

McCrory, Patricia A.; Constantz, James E.; Hunt, Andrew G.

2014-01-01

This U.S. Geological Survey report presents laboratory analyses along with field notes for a pilot study to document the relative abundance of noble gases in mineral springs within the Cascadia forearc of Washington and Oregon. Estimates of the depth to the underlying Juan de Fuca oceanic plate beneath the sample sites are derived from the McCrory and others (2012) slab model. Some of these springs have been previously sampled for chemical analyses (Mariner and others, 2006), but none currently have publicly available noble gas data. Helium isotope values as well as the noble gas values and ratios presented below will be used to determine the sources and mixing history of these mineral waters.

Arc-continent collision of the Coastal Range in Taiwan: Geochronological constraints from U-Pb ages of zircons

NASA Astrophysics Data System (ADS)

Geng, Wei; Zhang, Xun-Hua; Huang, Long

2018-04-01

The oblique arc-continent collision between the Luzon arc and the southeastern margin of the Eurasian continent caused the uplift of Taiwan. The Coastal Range in eastern Taiwan is the northern section of the Luzon arc in the collision zone and thus records important information about the arc-continent collision. In this paper, we determine and analyze the U-Pb ages of magmatic zircons from the volcanic arc and clastic zircons from the fore-arc basin in the Coastal Range. For the volcanic arc in the Coastal Range, the eruption ages range from 16.8-5 Ma. Given that the initial subduction of the South China Sea oceanic crust (17 Ma) occurred before the Luzon arc formed, we conclude that the volcanic activity of the Coastal Range began at 16.8 ± 1.3 Ma; it was most active from 14 to 8 Ma and continued until approximately 5 Ma. The U-Pb chronology also indicates that the initial stage of arc-continent collision of the Coastal Range started at approximately 5 Ma, when the northern section of the Luzon arc moved away from the magmatic chamber because of the kinematics of the Philippine Sea Plate.

Lidar-revised geologic map of the Uncas 7.5' quadrangle, Clallam and Jefferson Counties, Washington

USGS Publications Warehouse

Tabor, Rowland W.; Haeussler, Peter J.; Haugerud, Ralph A.; Wells, Ray E.

2011-01-01

In 2000 and 2001, the Puget Sound Lidar Consortium obtained 1 pulse/m2 lidar data for about 65 percent of the Uncas 7.5' quadrangle. For a brief description of LIDAR (LIght Detection And Ranging) and this data acquisition program, see Haugerud and others (2003). This map combines geologic interpretation (mostly by Haugerud and Tabor) of the 6-ft (2-m) lidar-derived digital elevation model (DEM) with the geology depicted on the Preliminary Geologic Map of the Uncas 7.5' Quadrangle, Clallam and Jefferson Counties, Washington, by Peter J. Haeussler and others (1999). The Uncas quadrangle in the northeastern Olympic Peninsula covers the transition from the accreted terranes of the Olympic Mountains on the west to the Tertiary and Quaternary basin fills of the Puget Lowland to the east. Elevations in the map area range from sea level at Port Discovery to 4,116 ft (1,255 m) on the flank of the Olympic Mountains to the southwest. Previous geologic mapping within and marginal to the Uncas quadrangle includes reports by Cady and others (1972), Brown and others (1960), Tabor and Cady (1978a), Yount and Gower (1991), and Yount and others (1993). Paleontologic and stratigraphic investigations by University of Washington graduate students (Allison, 1959; Thoms, 1959; Sherman, 1960; Hamlin, 1962; Spencer, 1984) also encompass parts of the Uncas quadrangle. Haeussler and Wells mapped in February 1998, following preliminary mapping by Yount and Gower in 1976 and 1979. The description of surficial map units follows Yount and others (1993) and Booth and Waldron (2004). Bedrock map units are modified from Yount and Gower (1991) and Spencer (1984). We used the geologic time scale of Gradstein and others (2005). The Uncas quadrangle lies in the forearc of the Cascadia subduction zone, about 6.25 mi (10 km) east of the Cascadia accretionary complex exposed in the core of the Olympic Mountains (Tabor and Cady, 1978b). Underthrusting of the accretionary complex beneath the forearc uplifted and tilted eastward the Coast Range basalt basement and overlying marginal basin strata, which comprise most of the rocks of the Uncas quadrangle. The Eocene submarine and subaerial tholeiitic basalt of the Crescent Formation on the Olympic Peninsula is thought to be the exposed mafic basement of the Coast Range, which was considered by Snavely and others (1968) to be an oceanic terrane accreted to the margin in Eocene time. In this interpretation, the Coast Range basalt terrane may have originated as an oceanic plateau or by oblique marginal rifting, but its subsequent emplacement history was complex (Wells and others, 1984). Babcock and others (1992) and Haeussler and others (2003) favor the interpretation that the basalts were the product of an oceanic spreading center interacting with the continental margin. Regardless of their origin, onlapping strata in southern Oregon indicate that the Coast Range basalts were attached to North America by 50 Ma; but on southern Vancouver Island, where the terrane-bounding Leech River Fault is exposed, Brandon and Vance (1992) concluded that suturing to North America occurred in the broad interval between 42 and 24 Ma. After emplacement of the Coast Range basalt terrane, the Cascadia accretionary wedge developed by frontal accretion and underplating (Tabor and Cady, 1978b; Clowes and others, 1987). Domal uplift of the part of the accretionary complex beneath the Olympic Mountains occurred after ~18 Ma (Brandon and others, 1998). Continental and alpine glaciation during Quaternary time reshaped the uplifted rocks of the Olympic Mountains.

Volcanic and Tectonic Evolution of The Gulf of California Near Mulege, Baja California Sur: Results From Baja Basins NSF-REU (Research Experience for Undergraduates)

NASA Astrophysics Data System (ADS)

Hutchinson, S. J.; Allard, J.; Acuna, N.; Graettinger, A. H.; Busby, C.

2017-12-01

Cenozoic volcanic rocks have been studied along many parts of the Gulf of California margin of Baja California because they provide a record of its volcano-tectonic evolution, from subduction (24-12 Ma), to rifting (<12 Ma). The 2015-2016 Baja Basins REU studied volcanic rocks around the Boleo basin, and used geochemistry and 40Ar/39AR geochronology to recognize a ca. 10-14 Ma calcalkaline subduction assemblage, and a 6.1 Ma magnesian andesite assemblage inferred to be related to the Boleo stratiform Cu-Co-Zn sulfides. However, volcanic rocks in a 5,000 km2 region between Santa Rosalia and Mulegé remain largely undivided. The 2017 volcanology group mapped a 390 km2 area inland from Mulegé. Geologic results are described here, while geochemical data used to divide the volcanic rocks into suites are described in an accompanying abstract1. We infer the following sequence of events: (1) A half graben filled with a >820 m thick red bed sequence, sourced to the east by andesitic volcanic rocks eroded from the footwall of a west-dipping normal fault. Proximal alluvial fan bajada deposits are debris-flow dominated, with angular clasts up to 1.3 m in size. Distal braided stream deposits have sandstones and cobble conglomerates, with abundant cut and fill structures and rounded clasts. Adakite trachyandesite block-and-ash-flow tuffs are interstratified with the proximal deposits, representing pyroclastic flows generated by collapse of lava domes plumbed up the basin-bounding fault to the east. (2) The redbeds were cut by a dike swarm that fed a field of lava shield volcanoes. The dikes and lava shields include calcalkaline basaltic andesite, andesite and dacite, as well as magnesian trachyandesite and basaltic andesite. (3) A N-S, subvertical fault stepped into the basin and dropped the lava shields down to the east, while they were eroded off the uplifted footwall to the west. (4) The footwall block was beveled and overlain by plateau-forming magnesian basaltic trachyandesite lavas. Basal clastic sequences in the Baja Gulf of California margin have been inferred to represent Oligocene forearc rocks, with overlying volcanic rocks recording westward sweep of the Miocene arc into the area. However, on the basis of our geochemistry, we infer that all of these rocks record post-subduction (<12 Ma) processes. 1 Acuna et al., this volume

Age, distribution, and stratigraphic relationship of rock units in the San Joaquin Basin Province, California: Chapter 5 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

USGS Publications Warehouse

Hosford Scheirer, Allegra; Magoon, Leslie B.

2008-01-01

The San Joaquin Basin is a major petroleum province that forms the southern half of California’s Great Valley, a 700-km-long, asymmetrical basin that originated between a subduction zone to the west and the Sierra Nevada to the east. Sedimentary fill and tectonic structures of the San Joaquin Basin record the Mesozoic through Cenozoic geologic history of North America’s western margin. More than 25,000 feet (>7,500 meters) of sedimentary rocks overlie the basement surface and provide a nearly continuous record of sedimentation over the past ~100 m.y. Further, depositional geometries and fault structures document the tectonic evolution of the region from forearc setting to strike-slip basin to transpressional margin. Sedimentary architecture in the San Joaquin Basin is complicated because of these tectonic regimes and because of lateral changes in depositional environment and temporal changes in relative sea level. Few formations are widespread across the basin. Consequently, a careful analysis of sedimentary facies is required to unravel the basin’s depositional history on a regional scale. At least three high-quality organic source rocks formed in the San Joaquin Basin during periods of sea level transgression and anoxia. Generated on the basin’s west side, hydrocarbons migrated into nearly every facies type in the basin, from shelf and submarine fan sands to diatomite and shale to nonmarine coarse-grained rocks to schist. In 2003, the U.S. Geological Survey (USGS) completed a geologic assessment of undiscovered oil and gas resources and future additions to reserves in the San Joaquin Valley of California (USGS San Joaquin Basin Province Assessment Team, this volume, chapter 1). Several research aims supported this assessment: identifying and mapping the petroleum systems, modeling the generation, migration, and accumulation of hydrocarbons, and defining the volumes of rock to be analyzed for additional resources. To better understand the three dimensional relationships between hydrocarbon source and reservoir rocks, we compiled a database consisting of more than 13,000 well picks and of one-mile resolution seismic grids. Both the well picks and the seismic grids characterize the depths to the top of key stratigraphic units. This database formed the basis of subsequent numerical modeling efforts, including the construction of a three- dimensional geologic model (Hosford Scheirer, this volume, chapter 7) and simulation of the petroleum systems in space and time (Peters, Magoon, Lampe, and others, this volume, chapter 12). To accomplish this modeling, we synthesized the age, geographic distribution, lithology, and petroleum characteristics of hydrocarbon source and reservoir rocks in the basin. The results of that synthesis are presented in this paper in the form of new stratigraphic correlation columns for the northern, central, and southern San Joaquin Valley (fig. 5.1; note that all figures are at the back of this report, following the References Cited). The stratigraphic relationships and ages published here draw heavily on published and unpublished studies of the San Joaquin Basin. The stratigraphy presented in each of the columns necessarily idealizes the subsurface geology over a relatively large area, instead of representing the specific geology at an individual well, oil and gas field, or outcrop. In this paper we present the background rationale for defining the geographic divisions of the basin (inset map, fig. 5.1), the paleontological time scales used for assigning absolute ages to rock units (figs. 5.2 and 5.3), and the supporting maps illustrating the geographic distribution of each rock type included in the stratigraphic column (figs. 5.4 through 5.64).

Tertiary deformation history of southeastern and southwestern Tibet during the Indo-Asian collision

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yin, A.; Harrison, T.M.; Murphy, M.A.

1999-11-01

Geologic mapping and geochronological analysis in southwest (Kailas area) and southeast (Zedong area) Tibet reveal two major episodes of Tertiary crustal shortening along the classic Indus-Tsangpo suture in the Yalu River valley. The older event occurred between ca. 30 and 24 Ma during movement along the north-dipping Gangdese thrust. The development of this thrust caused extensive denudation of the Gangdese batholith in its hanging wall and underthrusting of the Xigase forearc strata in its footwall. Examination of timing of major tectonic events in central Asia suggests that the initiation of the Gangdese thrust was approximately coeval with the late Oligocenemore » initiation and development of north-south shortening in the eastern Kunlun Shan of northern Tibet, the Nan Shan at the northeastern end of the Altyn Tagh fault, the western Kunlun Shan at the southwestern end of the Altyn Tagh fault, and finally the Tian Shan (north of the tarim basin). Such regionally synchronous initiation of crustal shortening in and around the plateau may have been related to changes in convergence rate and direction between the Eurasian plate and the Indian and Pacific plates. The younger thrusting event along the Yalu River valley occurred between 19 and 10 Ma along the south-dipping Great Counter thrust system, equivalent to the locally named Renbu-Zedong thrust in southeastern Tibet, the Backthrust system in south-central Tibet, and the South Kailas thrust in southwest Tibet. The coeval development of the Great Counter thrust and the North Himalayan granite-gneiss dome belt is consistent with their development being related to thermal weakening of the north Himalayan and south Tibetan crust, due perhaps to thermal relaxation of an already thickened crust created by the early phase of collision between India and Asia or frictional heating along major thrusts, such as the Main Central thrust, beneath the Himalaya.« less

The Importance of Actualistic Source-to-Sink Sand Provenance Studies in Illuminating the Nature of Ancient Fluvial Systems From the Deep-Marine Clastic Successions They Sourced

NASA Astrophysics Data System (ADS)

Marsaglia, K. M.; Parra, J. G.; Dawson, S.

2006-12-01

Successions of gravity-flow deposits in deep-marine fan systems have the potential to record the evolution of their fluvial source region as well as specific tectonic, climatic, eustatic and anthropogenic events. Deciphering these signals involves the description and quantification of key sediment attributes such as fan volume, the rate of sediment accumulation, the frequency of depositional events, sediment texture, and sediment composition. Sediment composition/provenance provides insight into the nature of the fluvial source, including drainage basin geology and drainage development. For example, Marsaglia et al. (1995) demonstrated a connection between source river lengthening owing to eustatic change and sand composition in Quaternary turbidite successions of the Santa Barbara Basin at Ocean Drilling Program (ODP) Site 893. In contrast, longer-term compositional trends recognized in the Mesozoic to Cenozoic rift-to-drift successions cored by various ODP legs on the North Atlantic margins are more likely associated with continental margin drainage development and fluvial system evolution (Marsaglia et al., in press). These two connections between sink and source were made possible by well-documented petrologic data sets for both modern onshore fluvial systems and older offshore deep-marine successions, but in each case different workers collected the onshore and offshore data sets. In the Waipaoa River Sedimentary System of North Island, New Zealand we have taken a different, more holistic approach, with a limited and linked group of researchers and sample data base covering the complete system. The study area is an active forearc margin characterized by uplifted and deformed sedimentary successions and periodic input of arc-derived ash. Recently, the modern onshore system has been thoroughly documented via studies of the petrology of outcropping Mesozoic to Cenozoic units, fluvial terrace deposits, and modern fluvial sediments (e.g., James et al., in press). Now we are building on that data set and moving from source-to-sink to trace sandy sediment through the system out onto the shelf and slope where it has been encountered in shallow cores. Lessons learned onshore, such as a distinct compositional dependence on grain size and the relationships of bedrock geology to certain sand grain types, also apply to these offshore core samples. Many of the sandy intervals are largely composed of reworked tephra from Taupo eruptions, whereas quartz and feldspar dominate finer sand samples. Lithic-dominated sands are less common and coarser grained. Isolated greywacke gravel clasts indicate that at some point coarse sediment "leaked" into the basin from the south. The volumetric importance of this extrabasinal input can be assessed by looking at the types and proportions of lithic fragments within the finer sand fraction.

Seismogenic patterns in the Taiwan region: insights from source parameter inversion of BATS data

NASA Astrophysics Data System (ADS)

Kao, Honn; Jian, Pei-Ru

2001-04-01

We systematically invert source parameters of 96 earthquakes that occurred in the Taiwan region between July 1995 and June 1998, using waveforms recorded by the newly established Broadband Array in Taiwan for Seismology (BATS). The results are utilized to delineate the seismogenic patterns associated with the regional tectonic processes between the Eurasia and Philippine Sea plates. In general, high seismicity is observed at five locations, including the Nan-ao basin (∼24°N, ∼122.4°E), near the Hualien area (∼24.2°N, ∼121.7°E), east of the Longitudinal Valley and within the Philippine Sea plate, the forearc region to the west of Lanshu, and the Okinawa trough. Events with focal depths less than 25 km scatter across a wide region from the Taiwan Strait to the Ryukyu and Luzon arcs, whereas events between 25 and 50 km concentrate offshore east of Taiwan. Most earthquakes that occurred beneath the Nan-ao basin are consistent with the northward subduction of the Philippine Sea plate along the plate interface. Events offshore east of the Longitudinal Valley and within the Philippine Sea plate are dominated by a compressional regime along the NW/NWW directions, whereas the Lanshu-Lutao forearc is characterized by E-W compression. Normal faults showing N-S extension are observed in the Okinawa trough where we observed a successive rotation of T-axes from N-S to NW-SE as the epicenters approach Taiwan, indicating a possible interaction between the extensional and compressional strain regimes there. Most events between 50 and 65 km depth within the subducted Philippine Sea plate beneath Ryukyu are in downdip extension with lateral compression approximately parallel to the strike of the slab. The depth where the state of strain switches from downdip extension to downdip compression is constrained at 110-125 km for the southernmost Ryukyu slab. Based on our results, we propose that the subducted Philippine Sea plate beneath NE Taiwan plays a significant role in the overall orogenic process of Taiwan. The lithospheric collision in Taiwan should consist of two major components: one is the well-recognized ;arc-continent collision; that dominates the central and southern Taiwan and another the ;slab-continent collision; that reigns in northern Taiwan. A cluster of earthquakes near Hualien suggests that an incipient west- or northwestward subduction of the Philippine Sea plate is currently taking place there. Alternatively, they can be interpreted to suggest that the steeply east-dipping Longitudinal Valley fault may have transformed, near Hualien, into a diffuse thrust zone, which eventually connects itself to the plate interplate beneath the southernmost Ryukyu arc. Earthquakes beneath Taiwan and the Taiwan Strait are compatible with the overall collision convergence and lateral extrusion. Nonetheless, the lateral extrusion is probably only a secondary feature in the tectonic processes of Taiwan.

Plate boundary and major fault system in the overriding plate within the Shumagin gap at the Alaska-Aleutian subduction zone

NASA Astrophysics Data System (ADS)

Becel, A.; Shillington, D. J.; Nedimovic, M. R.; Keranen, K. M.; Li, J.; Webb, S. C.; Kuehn, H.

2013-12-01

Structure in the overriding plate is one of the parameters that may increase the tsunamigenic potential of a subduction zone but also influence the seismogenic behavior and segmentation of great earthquake rupture. The Alaska-Aleutian margin is characterized by along-strike changes in plate interface coupling over relatively small distances. Here, we present trench normal multichannel seismic (MCS) profiles acquired across the Shumagin gap that has not broken in many decades and appears to be weakly coupled. The high fold, deep penetration (636 channel, 8-km long streamer, 6600 cu.in airgun source) MCS data were acquired as part of the ALEUT project. This dataset gives us critical new constraints on the interplate boundary that can be traced over ~100 km distance beneath the forearc with high variation in its reflection response with depth. These profiles also reveal the detailed upper plate fault structure and forearc morphology. Clear reflections in the overriding plate appear to delineate one or more large faults that cross the shelf and the upper slope. These faults are observed 75 km back from the trench and seem to branch at depth and connect to the plate interface within this gap at ~11 s twtt. We compare the reflective structure of these faults to that of the plate boundary and examine where it intersects the megathrust with respect of the expected downdip limit of coupling. We also compare this major structure with the seismicity recorded in this sector. The imaged fault system is associated with a large deep basin (~6s twt) that is an inherited structure formed during the pre-Aleutian period. Basins faults appear to have accommodated primarily normal motion, although folding of sediments near the fault and complicated fault geometries in the shallow section may indicate that this fault has accommodated other types of motion during its history that may reflect the stress-state at the megathrust over time. The deformation within the youngest sediment also suggests also that this fault system might be still active. The coincident wide-angle seismic data coincident with one MCS profile allow the addition of more information about the deep P-wave velocity structure whereas the streamer tomography (Michaelson-Rotermund et al., this session) around the fault system add more detailed view into the complex structure in the shallow portions (upper 2km) of these structures showing a low velocity zone along one large fault suggesting that this fault is still active. These large-scale structures imaged in the overriding plate within the Shumagin gap are probably sufficiently profound to play a major role in the behavior of the megathrust in this area, segmentation of great earthquake rupture area, tsunami generation and may influence the frictional properties of the seismogenic zone at depth.

Asthenospheric outflow from the shrinking Philippine Sea Plate: Evidence from Hf-Nd isotopes of southern Mariana lavas

NASA Astrophysics Data System (ADS)

Ribeiro, Julia M.; Stern, Robert J.; Martinez, Fernando; Woodhead, Jon; Chen, Min; Ohara, Yasuhiko

2017-11-01

At subduction zones, sinking of the downgoing lithosphere is thought to enable a return flow of asthenospheric mantle around the slab edges, so that the asthenosphere from underneath the slab invades the ambient mantle flowing underneath the volcanic arc and the backarc basin. For instance at the northern end of the Lau Basin, trench retreat and slab rollback enable toroidal return flow of Samoan mantle beneath a transform margin to provide a supply of fresh, undepleted Indian mantle that feeds the backarc spreading center. Questions, however, arise about the sense of mantle flow when plate kinematics predict that the trench is advancing, as seen in the Mariana convergent margin. Does the mantle flow in or does it escape outward through slab tears or gaps? Here, we address the origin and sense of asthenospheric mantle flow supplying the southern Mariana convergent margin, a region of strong extension occurring above the subducting Pacific plate. Does the asthenosphere flow northward, from underneath the Pacific plate and Caroline hotspot through a slab tear or gap, or does it flow outward from the Mariana Trough, which possesses a characteristic Indian Ocean isotopic signature? To address these questions, we integrate geodetic data along with new Hf-Nd isotopic data for fresh basaltic lavas from three tectonic provinces in the southernmost Marianas: the Fina Nagu volcanic complex, the Malaguana-Gadao backarc spreading ridge and the SE Mariana forearc rift. Our results indicate that Indian mantle flows outward and likely escapes through slab tears or gaps to accommodate shrinking of the Philippine Sea plate. We thus predict that asthenospheric flow around the Pacific slab at the southern Mariana Trench is opposite to that predicted by most subduction-driven mantle flow models.

Late Cretaceous and Paleogene sedimentation along east side of San Joaquin basin, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, S.A.

1986-04-01

Depositional systems of the Late Cretaceous contrast with those of the Paleogene in the subsurface along the east side of the San Joaquin basin between Bakersfield and Fresno, California. Upper Cretaceous deposits include thick fan-delta and submarine fan facies of the Moreno and Panoche Formations, whereas the paleogene contains extensive nearshore, shelf, slope, and submarine fan deposits of the Lodo, Domengine, and Kreyenhagen Formations. These sediments were deposited on a basement surface having several west-trending ridges and valleys. West-flowing streams draining an ancestral Sierra Nevada of moderate relief formed prograding fan deltas that filled the valleys with thick wedges ofmore » nonmarine channel deposits, creating a bajada along the shoreline. Detrital material moved rapidly from the shoreline through a narrow shelf, into a complex of submarine fans in the subduction trough. During the early Eocene, a low sea level stand plus an end of Sierra Nevada uplift resulted in the erosion of the range to a peneplain. Stream-fed fan deltas were replaced by a major river system, which flowed west on about the present course of the Kern River. Following a rapid sea level increase, sand from the river system was deposited on the now broad shelf along a wide belt roughly coincident with California Highway 99. The river was also the point source for sand in a submarine fan northwest of Bakersfield. Both Upper Cretaceous and Paleogene depositional systems probably continue north along the east edge of the Great Valley. This proposed scenario for the east side of the San Joaquin is analogous to forearc deposits in the San Diego area, including the Cretaceous Rosario fan-delta and submarine fan system and the Eocene La Jolla and Poway nearshore, shelf, and submarine fan systems.« less

The Characteristics of Turbidite Beds of Southwest Ryukyu Trench Floor: A new Approach From the X-ray Fluorescence Core Scanning Analysis

NASA Astrophysics Data System (ADS)

Hsiung, K. H.; Kanamatsu, T.; Ikehara, K.; Usami, K.; Saito, S.; Murayama, M.

2017-12-01

The southwest Ryukyu Trench near Taiwan is an ideal place for source-to-sink studies based on the distinctive sediment transport route between the terrestrial sediment source in Taiwan and the marine sink in the Ryukyu Trench. Using the bathymetric and seismic reflection data, we develop a sediment transport routes for understanding the ultimate sink of the southwest Ryukyu Trench floor. The southwest Ryukyu Trench floor can be regarded as the most distal depositional basin and isolated from the Ryukyu forearc basins. In addition, part of sediment from the proximal sources of the Ryukyu Islands and Yaeyama accretionary prism could be transported to the trench floor. We collected the piston core, PC04, from the southwest Ryukyu Trench floor of 6,147 m water depth in 3.23 m core length from cruise KR15-18, 2015. The coring site locates behind the natural levee of an obvious channel in the Ryukyu trench floor. The PC04 is composed of gray silty clay interbedded with numerous silt layers. Most of the silt layers are less than 2 cm in thickness. Based upon the core observation, X-ray fluorescence core scanning analysis and 14C age determinations, thirty-seven individual and thin beds were determined as turbidites. The results of X-ray fluorescence core scanning analysis provide continuous and high-resolution (1.0 mm of each point) assessment of relative change in the elemental ratios. Ca/Fe is a proxy for the terrigenous component of the sediment, indicating the High Ca and low Fe of each turbidite layers. Zr/Rb ratios of the marine sediments commonly used in the reflection of the original grain size variation. A large part of deep-sea turbidite beds are characterized by high Ca/Fe and Zr/Rb ratio values. These turbidite beds can be linked spatially over a distance of ˜200 km via submarine canyons within the Taiwan orogen. However, it is difficult to be linked temporally to certain events.

Geological and Geophysical Integration Regarding a Structural Evolution Modelling of a Suture Zone Controlled by a Cratonic Buttress - The Case of Dom Feliciano Orogenic Belt, SSE Brazil, Implications for Western Gondwana Assembly

NASA Astrophysics Data System (ADS)

Bruno, H.; Almeida, J.; Heilbron, M. C. P. L.; Salomão, M.

2017-12-01

The matters surrounding the amalgamation of tectonic blocks during the Brasiliano / Pan-African orogeny have been the main subject of study of several works in recent years. The main objective of this work is the hierarchy and discrimination of the boundaries between the known tectonic blocks, integrating geological and geophysical data. The geology of the study area is dominated by Precambrian terranes; Luís Alves Terrane, the vulcanosedimentary sequences of the Itajaí and Campo Alegre Basins, the metasedimentary sequences of the Brusque and Paranaguá Terranes and their granitic suites besides the granitoids of the Florianópolis Terrane. The shear zones and faults that separate these crustal blocks were developed during the Brasiliano / Pan-African orogenic cycle that led to the formation of the supercontinent Gondwana. These tectonic boundaries generally separate blocks of different rheology and crustal thickness. The integration of geological and geophysical data allowed the identification of important structural lineaments and crustal boundaries. The presented geodynamic model suggests that the suture between the block composed of the Brusque, Paranaguá and Florianópolis Terranes and the block composed by the Luís Alves Terrane is the Itajaí Perimbó Shear Zone, and not the Major Gercino Shear Zone as previously suggested. Considering the Itajaí Perimbó Shear Zone as the suture zone, the metassediments of the Brusque Terrane were deposited on the basement of the Florianópolis Terrane, hereby declared as part of the Angola Craton, and are correlated to the metassediments of the Paranaguá Terrane as a passive margin that in approximately ca. 650 My became active margin, functioning as a forearc basin. The oblique collision between the blocks would have occurred with the development of a dextral transpression in the Itajaí Perimbó Shear Zone, separating the Luís Alves Terrane from the Brusque Terrane, a sinistral transcurrence represented by the Palmital Shear Zone separating the Luís Alves Terrane from the Paranaguá Terrane and a frontal thrust, represented by the Icapara and Serra Negra Shear Zones, separating the already amalgamated block from the Luís Alves and Curitiba Terranes of the Paranaguá Terrane.

Crustal rifting and magmatic underplating in the Izu-Ogasawara (Bonin) intra-oceanic arc detected by active source seismic studies

NASA Astrophysics Data System (ADS)

Takahashi, N.; Kodaira, S.; Yamashita, M.; Miura, S.; Sato, T.; No, T.; Tatsumi, Y.; Kaneda, Y.

2009-12-01

Japan Agency for Marine-Earth Science and Technology (JAMSTEC) has carried out seismic experiments using a multichannel reflection system and ocean bottom seismographs (OBSs) in the Izu-Ogasawara (Bonin)-Mariana (IBM) arc region since 2002 to understand growth process of continental crust. The source was an airgun array with a total capacity of 12,000 cubic inches and the OBSs as the receiver were deployed with an interval of 5 km for all seismic refraction experiments. As the results, we obtained crustal structures across the whole IBM arc with an interval of 50 km and detected the structural characteristics showing the crustal growth process. The IBM arc is one of typical oceanic island arc, which crustal growth started from subduction of an oceanic crust beneath the other oceanic crust. The arc crust has developed through repeatedly magmatic accretion from subduction slab and backarc opening. The volcanism has activated in Eocene, Oligocene, Miocene and Quaternary (e.g., Taylor, 1992), however, these detailed locations of past volcanic arc has been remained as one of unknown issues. In addition, a role of crustal rifting for the crustal growth has also been still unknown issue yet. Our seismic structures show three rows of past volcanic arc crusts except current arc. A rear arc and a forearc side have one and two, respectively. The first one, which was already reported by Kodaira et al. (2008), distributes in northern side from 27 N of the rear arc region. The second one, which develops in the forearc region next to the recent volcanic front, distributes in whole of the Izu-Ogasawara arc having crustal variation along arc direction. Ones of them sometimes have thicker crust than that beneath current volcanic front and no clear topographic high. Last one in the forearc connects to the Ogasawara Ridge. However, thickest crust is not always located beneath these volcanic arcs. The initial rifting region like the northern end of the Mariana Trough and the Sumisu Rift has thicker crust than that beneath recent volcanic front, although crustal thinning with high velocity lower crust was detected beneath advanced rifted region. This suggests that the magmatic underplating play a role to make open the crust. The magmatic underplating accompanied with the initial rifting is one of important issues to discuss the crustal evolution.

Ancient mantle in a modern arc: osmium isotopes in izu-bonin-mariana forearc peridotites

PubMed

Parkinson; Hawkesworth; Cohen

1998-09-25

Mantle peridotites drilled from the Izu-Bonin-Mariana forearc have unradiogenic 187Os/188Os ratios (0.1193 to 0.1273), which give Proterozoic model ages of 820 to 1230 million years ago. If these peridotites are residues from magmatism during the initiation of subduction 40 to 48 million years ago, then the mantle that melted was much more depleted in incompatible elements than the source of mid-ocean ridge basalts (MORB). This result indicates that osmium isotopes record information about ancient melting events in the convecting upper mantle not recorded by incompatible lithophile isotope tracers. Subduction zones may be a graveyard for ancient depleted mantle material, and portions of the convecting upper mantle may be less radiogenic in osmium isotopes than previously recognized.

Polyphase serpentinization history of Mariana forearc mantle: observations on the microfabric of ultramafic clasts from ODP Leg 195, Site 1200

NASA Astrophysics Data System (ADS)

Kahl, Wolf-Achim; Jöns, Niels; Bach, Wolfgang; Klein, Frieder

2013-04-01

In the forearc of the Mariana subduction zone system, a number of seamounts form from extrusion of blueschist and serpentine mud. Ocean Drilling Program Leg 195 drilled the South Chamorro seamount, where ultramafic clasts occur within the mud matrix. These clasts show a complex serpentinization history, which bears the potential for tracking the alteration history during uplift and cooling of mantle wedge rocks to the seafloor. Moreover, the microfabrics of the highly serpentinized harzburgite and dunite clasts exhibit evidence for multiple fracturing events in the forearc mantle. These, in turn, lead to fluid influx and varied styles of serpentinization of harzburgite and dunite. The serpentinized ultramafic clasts exhibit a variety of microfabrics that range from virtually undeformed to strongly deformed samples. Pervasively serpentinized harzburgites feature either an equigranular fabric of serpentinized olivine and orthopyroxene crystals, or different vein generations related to multiple stages of serpentinization. Several types of fluid pathways in harzburgites are present: (i) veins containing brucite and iron oxides, developed linearly without marked conformance with the rock fabric. In places, these veins developed mm-cm wide halos with finger-shaped serpentinization fronts. Veins of type (i) are either developed as syntaxial veins from a single crack-seal event with large magnetite crystals growing from one wall to the other (as confirmed with high-resolution X-ray microtomography), or formed by multiple fluid events. (ii) serpentine veins that encompass regions of marginally serpentinized, microgranular olivine and large orthopyroxene crystals. (iii) extensional serpentine veins (known as "Frankenstein" type). In the clasts studied, their occurrence is restricted to the halo region of type (i) veins. (iv) as a late-stage feature, extensional veins documenting multiple crack-seal events can be present in the serpentinites (either in undeformed regions with preserved equigranular fabric, or in serpentinites of type (i) and (ii) where they crosscut and offset earlier vein generations). In addition, serpentinized dunites can host syntaxial serpentine veins (ribbons). The ribbons separate regions, where recrystallization of serpentine and brucite can be observed. Presumably the lack of orthopyroxene locally influences the rheology and thus enable ribbon formation. The serpentine and/or brucite assemblages formed during these different stages show distinct trace element patterns suggesting a diminished influence of slab-related fluids during later stages of serpentinization. Ongoing work is aimed at reconciling textural and geochemical co-evolution during serpentinization of the mantle wedge. In particular, deciphering deformation-related pathways for serpentinizing fluids and identifying their geochemical signatures may foster our understanding of shallow subduction-related mass transfer in supra-subduction zones.

Using paleomagnetism to expand the observation time window of plate locking along subduction zones: evidence from the Chilean fore-arc sliver (38°S - 42°S)

NASA Astrophysics Data System (ADS)

Hernandez-Moreno, Catalina; Speranza, Fabio; Di Chiara, Anita

2017-04-01

Fore-arc crustal motion has been usually addressed by the analysis of earthquake slip vectors and, since the last twenty years, by velocity fields derived from Global Positioning System (GPS) data. Yet this observation time window (few decades) can be significantly shorter than a complete seismic cycle or constrained to interseismic periods where the postseismic deformation release, the vicinity of other important faults, and the slip partitioning in oblique subduction may hinder the finite deformation pattern. Paleomagnetic data may yield finite rotations occurring since rock formation, thus provide a much longer observation time span in the order of millions or tens of millions of years. The cumulative permanent or nonreversing deformation in function of the considered geological formation age can represent the average over many seismic cycles, thus significantly complement "instantaneous" information derived from seismic and GPS data. With the aim of evaluate the strike-variation and evolution of the plate coupling along the Chilean subduction zone, here we report on the paleomagnetism of 43 Oligocene-Pleistocene volcanic sites from the fore-arc sliver between 38°S and 42°S. Sites were gathered west of the 1000 km long Liquiñe-Ofqui dextral fault zone (LOFZ) that represents the eastern fore-arc sliver boundary. Nineteen reliable sites reveal that the fore arc is characterized by counterclockwise (CCW) rotations of variable magnitude, except at 40°S - 41°S, where ultrafast (>50°/Myr) clockwise (CW) rotations occur within a 30 km wide zone adjacent to the LOFZ. CCW rotation variability (even at close sites) and rapidity (>10°/Myr) suggest that the observed block rotation pattern is related to NW-SE seismically active sinistral faults crosscutting the whole fore arc. According to previously published data, CW rotations up to 170° also occur east of the LOFZ and have been related to ongoing LOFZ shear. We suggest that the occurrence and width of the eastern fore-arc sliver undergoing CW rotations is a function of plate coupling along the subduction zone interface. Zones of high coupling enhance stress normal to the LOFZ, induce high LOFZ strength, and yield a wide deformation zone characterized by CW rotations. Conversely, low coupling imply a weak LOFZ, a lack of CW rotations, and a fore arc entirely dominated by CCW rotations related to sinistral fault kinematics. Our locking inferences are in good agreement with those recently derived by GPS analysis and indicate that seismotectonic segment coupling has remained virtually unchanged during the last 5Ma.

Compositional Variations of Paleogene and Neogene Tephra From the Northern Izu-Bonin-Mariana Arc

NASA Astrophysics Data System (ADS)

Tepley, F. J., III; Barth, A. P.; Brandl, P. A.; Hickey-Vargas, R.; Jiang, F.; Kanayama, K.; Kusano, Y.; Li, H.; Marsaglia, K. M.; McCarthy, A.; Meffre, S.; Savov, I. P.; Yogodzinski, G. M.

2014-12-01

A primary objective of IODP Expedition 351 was to evaluate arc initiation processes of the Izu-Bonin-Mariana (IBM) volcanic arc and its compositional evolution through time. To this end, a single thick section of sediment overlying oceanic crust was cored in the Amami Sankaku Basin where a complete sediment record of arc inception and evolution is preserved. This sediment record includes ash and pyroclasts, deposited in fore-arc, arc, and back-arc settings, likely associated with both the ~49-25 Ma emergent IBM volcanic arc and the evolving Ryukyu-Kyushu volcanic arc. Our goal was to assess the major element evolution of the nascent and evolving IBM system using the temporally constrained record of the early and developing system. In all, more than 100 ash and tuff layers, and pyroclastic fragments were selected from temporally resolved portions of the core, and from representative fractions of the overall core ("core catcher"). The samples were prepared to determine major and minor element compositions via electron microprobe analyses. This ash and pyroclast record will allow us to 1) resolve the Paleogene evolutionary history of the northern IBM arc in greater detail; 2) determine compositional variations of this portion of the IBM arc through time; 3) compare the acquired data to an extensive whole rock and tephra dataset from other segments of the IBM arc; 4) test hypotheses of northern IBM arc evolution and the involvement of different source reservoirs; and 5) mark important stratigraphic markers associated with the Neogene volcanic history of the adjacent evolving Ryukyu-Kyushu arc.

Post-Paleogene Deformation in central Anatolia, South of Ankara (Turkey)

NASA Astrophysics Data System (ADS)

Rojay, Bora

2014-05-01

The closure of the northern Neo-Tethys took place between Eurasia in the north and northern edge of Afro- Arabian plate in the south since the Early Cretaceous is documented in central Anatolia. It is mated by Cretaceous ophiolitic mélanges thrusted over southwards on to the upper Cretaceous-Paleogene fore-arc and foreland sequences along the northern margins of Haymana and Tuzgölü basins, respectively. Two main deformation episodes are recognized in the region. These include post-Cretaceous-pre Miocene compressional regime and Miocene to mid-Pliocene transcurrent regime dominated extensional deformation. The first regime is characterize by NW-SE directed compressional and contractional deformation dominated by south vergent, large wave length, asymmetric to overturned folds and associated thrust/reverse faults. Some of these reverse faults were reactivated as strike-slip faults with reverse components as evidenced by cross-cutting relationships and overprinting slickensides observed extensively in the field. Along these reactivated faults, echelon calcite veins, fault parallel meter thick silica walls with repeated phases of deformation are very common. Following the Miocene, the region is affected by a NNE-SSW to NE-SW directed extension, possibly resulted from the interaction of Tuzgölü Fault with the northwards convex splays of dextral North Anatolian Fault extending into the region. As a conclusion, the Paleogene sequences with ophiolitic mélanges are deformed under NNE-SSW directed compression related to the development of dextral strike slip tectonics during post-Paleogene-pre-Miocene period. Keywords:fault plane slip data, transcurrent regime, post-Paleogene, central Anatolia.

A 3 Kilometer Deep Window on the Interior of the Modern Nankai Accretionary Wedge: First Results from IODP Expedition 348

NASA Astrophysics Data System (ADS)

Tobin, Harold; Hirose, Takehiro; Demian, Saffer

2014-05-01

IODP Site C0002 at the Nankai Trough is now the deepest hole ever drilled in scientific ocean drilling, at 3058 meters below sea floor so far, and the first hole anywhere to access the deep interior of an active convergent margin. Site C0002 is part of the NanTroSEIZE transect off the Kii-Kumano region of Japan, imaged with 3D seismic reflection and drilled on a series of Chikyu expeditions to shed light on the processes around the up-dip edge of seismogenic locking and slip. At Site C0002, riser drilling has passed through the approximately 900 m thick Kumano forearc basin and pierced the underlying Miocene age accretionary wedge. Limited coring, extensive LWD logging, and continuous observations on drill cuttings reveal the materials and processes in the deep interior of the inner wedge. Predominantly fine-grained mudstones with common turbiditic sands were encountered, complexly deformed and exhibiting well-developed scaly clay fabrics, variable bedding dip with very steep dips prevailing, and veins that become more abundant with depth. The biostratigraphic age of the sediments in the lowermost part of the hole is thought to be ~ 9 - 11 Ma, with an assumed age of accretion of 3-5 Ma. Physical properties suggest that the inner wedge from 1600 - 3000 mbsf has quite homogeneous properties. Evidence from borehole logging, drilling parameters, and samples for the state of stress and pore pressure in this never-before accessed tectonic environment will be presented.

GPS-derived coupling estimates for the Central America subduction zone and volcanic arc faults: El Salvador, Honduras and Nicaragua

NASA Astrophysics Data System (ADS)

Correa-Mora, F.; DeMets, C.; Alvarado, D.; Turner, H. L.; Mattioli, G.; Hernandez, D.; Pullinger, C.; Rodriguez, M.; Tenorio, C.

2009-12-01

We invert GPS velocities from 32 sites in El Salvador, Honduras and Nicaragua to estimate the rate of long-term forearc motion and distributions of interseismic coupling across the Middle America subduction zone offshore from these countries and faults in the Salvadoran and Nicaraguan volcanic arcs. A 3-D finite element model is used to approximate the geometries of the subduction interface and strike-slip faults in the volcanic arc and determine the elastic response to coupling across these faults. The GPS velocities are best fit by a model in which the forearc moves 14-16 mmyr-1 and has coupling of 85-100 per cent across faults in the volcanic arc, in agreement with the high level of historic and recent earthquake activity in the volcanic arc. Our velocity inversion indicates that coupling across the potentially seismogenic areas of the subduction interface is remarkably weak, averaging no more than 3 per cent of the plate convergence rate and with only two poorly resolved patches where coupling might be higher along the 550-km-long segment we modelled. Our geodetic evidence for weak subduction coupling disagrees with a seismically derived coupling estimate of 60 +/- 10 per cent from a published analysis of earthquake damage back to 1690, but agrees with three other seismologic studies that infer weak subduction coupling from 20th century earthquakes. Most large historical earthquakes offshore from El Salvador and western Nicaragua may therefore have been intraslab normal faulting events similar to the Mw 7.3 1982 and Mw 7.7 2001 earthquakes offshore from El Salvador. Alternatively, the degree of coupling might vary with time. The evidence for weak coupling indirectly supports a recently published hypothesis that much of the Middle American forearc is escaping to the west or northwest away from the Cocos Ridge collision zone in Costa Rica. Such a hypothesis is particularly attractive for El Salvador, where there is little or no convergence obliquity to drive the observed trench-parallel forearc motion.

Revisit of Criteria and Evidence for the Tectonic Erosion vs Accretion in East Asian Margin

NASA Astrophysics Data System (ADS)

Kimura, G.; Hamahashi, M.

2015-12-01

Accretionary and erosive margins provide tectonic end-members in subduction zone and how these tectonic processes might be recorded and recognizable in ancient subduction complexes remains a challenging issue. Tectonic erosion includes sediment subduction and basal erosion along the plate boundary megathrust and drags down the crust of the upper plate into the mantle. Geologic evidence for the erosion is commonly based on lost geological tectono-stratigraphic data, i.e. gaps in the record and indirect phenomena such as subsidence of the forearc slopes. A topographically rough surface such as seamount has been suggested to work like an erosive saw carving the upper plate. Another mechanism of basal erosion has been suggested to be hydrofracturing of upper plate materials due to dehydration-induced fluid pressures, resulting in entrainment of upper plate materials into the basal décollement. Considering the interaction between the ~30 km thick crust of the upper plate and subducting oceanic plate, a subduction dip angle of ~15°, and convergent rate of ~10 cm/year, at least ~1 Ma of continuous basal erosion is necessary to induce clear subsidence of the forearc because the width of plate interface between the upper crustal and subducting plates is about 115 km (30/cos15°). In several examples of subduction zones, for example the Japan Trench and the Middle America Trench off Costa Rica, the subsidence of a few thousand metres of the forearc, combined with a lack of accretionary prism over a period of several million years, suggest that the erosive condition needs to be maintained for several to tens of million years.Such age gaps in the accretionary complex, however, do not automatically imply that tectonic erosion has taken place, as other interpretations such as no accretion, cessation of subduction, and/or later tectonic modification, are also possible. Recent drilling in the forearc of the Nankai Trough suggests that the accretion was ceased between ~12 Ma to ~8 Ma due to the transference of subduction from the Pacific Plate to the Philippine Sea Plate, as opposed to the continuous subduction of the Phillipine Sea Plate with subduction erosion.

Multi-temporal InSAR analysis to reduce uncertainties and assess time-dependence of deformation in the northern Chilean forearc

NASA Astrophysics Data System (ADS)

Manjunath, D.; Gomez, F.; Loveless, J.

2005-12-01

Interferometric Synthetic Aperture Radar (InSAR) provides unprecedented spatial imaging of crustal deformation. However, for small deformations, such as those due to interseismic strain accumulation, potentially significant uncertainty may result from other sources of interferometric phase, such as atmospheric effects, errors in satellite baseline, and height errors in the reference digital elevation model (DEM). We aim to constrain spatial and temporal variations in crustal deformation of the northern Chilean forearc region of the Andean subduction zone (19° - 22°S) using multiple interferograms spanning 1995 - 2000. The study area includes the region of the 1995 Mw 8.1 Antofagasta earthquake and the region to the north. In contrast to previous InSAR-based studies of the Chilean forearc, we seek to distinguish interferometric phase contributions from linear and nonlinear deformation, height errors in the DEM, and atmospheric effects. Understanding these phase contributions reduces the uncertainties on the deformation rates and provides a view of the time-dependence of deformation. The inteferograms cover a 150 km-wide swath spanning two adjacent orbital tracks. Our study involves the analysis of more than 28 inteferograms along each track. Coherent interferograms in the hyper-arid Atacama Desert permit spatial phase unwrapping. Initial estimates of topographic phase were determined using 3'' DEM data from the SRTM mission. We perform a pixel-by-pixel analysis of the unwrapped phase to identify time- and baseline-dependent phase contributions, using the Gamma Remote Sensing radar software. Atmospheric phase, non-linear deformation, and phase noise were further distinguished using a combination of spatial and temporal filters. Non-linear deformation is evident for up to 2.5 years following the 1995 earthquake, followed by a return to time-linear, interseismic strain accumulation. The regional trend of linear deformation, characterized by coastal subsidence and relative uplift inland, is consistent with the displacement field expected for a locked subduction zone. Our improved determination of deformation rates is used to formulate a new elastic model of interseismic strain in the Chilean forearc.

Stable isotope compositions of serpentinite seamounts in the Mariana forearc: Serpentinization processes, fluid sources and sulfur metasomatism

USGS Publications Warehouse

Alt, J.C.; Shanks, Wayne C.

2006-01-01

The Mariana and Izu-Bonin arcs in the western Pacific are characterized by serpentinite seamounts in the forearc that provide unique windows into the mantle wedge. We present stable isotope (O, H, S, and C) data for serpentinites from Conical seamount in the Mariana forearc and S isotope data for Torishima seamount in the Izu-Bonin forearc in order to understand the compositions of fluids and temperatures of serpentinization in the mantle wedge, and to investigate the transport of sulfur from the slab to the mantle wedge. Six serpentine mineral separates have a restricted range of ??18O (6.5-8.5???). Antigorite separates have ??D values of -29.5??? to -45.5??? that reflect serpentinization within the mantle wedge whereas chrysotile has low ??D values (-51.8??? to -84.0???) as the result of re-equilibration with fluids at low temperatures. Fractionation of oxygen isotopes between serpentine and magnetite indicate serpentinization temperatures of 300-375 ??C. Two late cross-fiber chrysotile veins have higher ??18O values of 8.9??? to 10.8??? and formed at lower temperatures (as low as ???100 ??C). Aqueous fluids in equilibrium with serpentine at 300-375 ??C had ??18O = 6.5-9??? and ??D = -4??? to -26???, consistent with sediment dehydration reactions at temperatures <200 ??C in the subducting slab rather than a basaltic slab source. Three aragonite veins in metabasalt and siltstone clasts within the serpentinite flows have ??18O = 16.7-24.5???, consistent with the serpentinizing fluids at temperatures <250 ??C. ??13C values of 0.1-2.5??? suggest a source in subducting carbonate sediments. The ??34S values of sulfide in serpentinites on Conical Seamount (-6.7??? to 9.8???) result from metasomatism through variable reduction of aqueous sulfate (??34S = 14???) derived from slab sediments. Despite sulfur metasomatism, serpentinites have low sulfur contents (generally < 164 ppm) that reflect the highly depleted nature of the mantle wedge. The serpentinites are mostly enriched in 34S (median ??34Ssulfide = 4.5???), consistent with a 34S-enriched mantle wedge as inferred from arc lavas. ?? 2006 Elsevier B.V. All rights reserved.

Seismic Imaging of the Lesser Antilles Subduction Zone Using S-to-P Receiver Functions: Insights From VoiLA

NASA Astrophysics Data System (ADS)

Chichester, B.; Rychert, C.; Harmon, N.; Rietbrock, A.; Collier, J.; Henstock, T.; Goes, S. D. B.; Kendall, J. M.; Krueger, F.

2017-12-01

In the Lesser Antilles subduction zone Atlantic oceanic lithosphere, expected to be highly hydrated, is being subducted beneath the Caribbean plate. Water and other volatiles from the down-going plate are released and cause the overlying mantle to melt, feeding volcanoes with magma and hence forming the volcanic island arc. However, the depths and pathways of volatiles and melt within the mantle wedge are not well known. Here, we use S-to-P receiver functions to image seismic velocity contrasts with depth within the subduction zone in order to constrain the release of volatiles and the presence of melt in the mantle wedge, as well as slab structure and arc-lithosphere structure. We use data from 55-80° epicentral distances recorded by 32 recovered broadband ocean-bottom seismometers that were deployed during the 2016-2017 Volatiles in the Lesser Antilles (VoiLA) project for 15 months on the back- and fore-arc. The S-to-P receiver functions are calculated using two methods: extended time multi-taper deconvolution followed by migration to depth to constrain 3-D discontinuity structure of the subduction zone; and simultaneous deconvolution to determine structure beneath single stations. In the south of the island arc, we image a velocity increase with depth associated with the Moho at depths of 32-40 ± 4 km on the fore- and back-arc, consistent with various previous studies. At depths of 65-80 ± 4 km beneath the fore-arc we image a strong velocity decrease with depth that is west-dipping. At 96-120 ± 5 km beneath the fore-arc, we image a velocity increase with depth that is also west-dipping. The dipping negative-positive phase could represent velocity contrasts related to the top of the down-going plate, a feature commonly imaged in subduction zone receiver function studies. The negative phase is strong, so there may also be contributions to the negative velocity discontinuity from slab dehydration and/or mantle wedge serpentinization in the fore-arc.

Continuous forearc extension following the 2010 Maule megathrust earthquake: InSAR and seismic observations and modelling

NASA Astrophysics Data System (ADS)

Bie, L.; Rietbrock, A.; Agurto-Detzel, H.

2017-12-01

The forearc region in subduction zones deforms in response to relative movement on the plate interface throughout the earthquake cycle. Megathrust earthquakes may alter the stress field in the forearc areas from compression to extension, resulting in normal faulting earthquakes. Recent cases include the 2011 Iwaki sequence following the Tohoku-Oki earthquake in Japan, and 2010 Pichilemu sequence after the Maule earthquake in central Chile. Given the closeness of these normal fault events to residential areas, and their shallow depth, they may pose equivalent, if not higher, seismic risk in comparison to earthquakes on the megathrust. Here, we focus on the 2010 Pichilemu sequence following the Mw 8.8 Maule earthquake in central Chile, where the Nazca Plate subducts beneath the South American Plate. Previous studies have clearly delineated the Pichilemu normal fault structure. However, it is not clear whether the Pichilemu events fully released the extensional stress exerted by the Maule mainshock, or the forearc area is still controlled by extensional stress. A 3 months displacement time-series, constructed by radar satellite images, clearly shows continuous aseismic deformation along the Pichilemu fault. Kinematic inversion reveals peak afterslip of 25 cm at shallow depth, equivalent to a Mw 5.4 earthquake. We identified a Mw 5.3 earthquake 2 months after the Pichilemu sequence from both geodetic and seismic observations. Nonlinear inversion from geodetic data suggests that this event ruptured a normal fault conjugate to the Pichilemu fault, at a depth of 4.5 km, consistent with the result obtained from independent moment tensor inversion. We relocated aftershocks in the Pichilemu area using relative arrivals time and a 3D velocity model. The spatial correlation between geodetic deformation and aftershocks reveals three additional areas which may have experienced aseismic slip at depth. Both geodetic displacement and aftershock distribution show a conjugated L-shape feature. This pattern coincides with weak zones depicted by high vp/vs and low vs in the upper crust of this region, suggesting fluid control of seismic and aseismic activities in the Pichilemu area.

Tectonic studies of the Caribbean: Pure GPS Euler vectors to test for rigidity and for the existence of a Northern Lesser Antilles Forearc block; constraints for tsunami risk from reassessment of the April 1, 1946 Alaska-Aleutians and August 4, 1946 Hispaniola events

NASA Astrophysics Data System (ADS)

Lopez, Alberto M.

New Global Positioning System (GPS) data from nine sites within stable portions of the Caribbean (CA) plate have been used to constrain its motion in the International GPS Service reference frame (IGSb00) and with respect to North (NA) and South (SA) American plates. A comparison of GPS velocities between eastern and western Caribbean sites shows that there is no significant internal deformation occurring within the plate (0.9 mm/yr). The CA-NA Euler vector was used to predict azimuths at the northern Lesser Antilles arc, which slip vectors still misfit (˜ 5°--25°). This confirms slip partitioning in the forearc, where a forearc sliver, for the first time introduced here as the Northern Lesser Antilles Forearc block (NLAF) moves counter-clockwise with respect to Caribbean crust. Seismicity of the plate in conjunction with historical records of tsunamis in the Caribbean serves as evidence the region is prone to tsunamis. The Hispaniola August 4, 1946 earthquake generated a tsunami that 5 resulted in great loss of lives. A quantitative comparison of this event with that of the Aleutians April 1, 1946 show the tsunami originated from a submarine landslide and not as a "tsunami earthquake". The April 1, 1946 earthquake stands out as an exceptional case of slow rupture velocity. With a re-computed fault area of 181 x 115 km from aftershock relocations, and seismic moment of 5 x 1027 dyn-cm, the event features the smallest radiated energy to moment ratio (theta = -7.03) ever recorded to date. Tsunami earthquakes, such as the Hispaniola 1946, may have already occured in the past and could occur again in the Caribbean. Hence, potential rupture segments have been identified and used as loci of possible events in an effort to help assess the tsunami risk in the Caribbean and Atlantic region.

Carbonation of Subduction Interface Ultramafic Rocks and Implications for Deep Carbon Cycling: Evidence from Hybrid Serpentinite-Marble in the Voltri Massif, Italy

NASA Astrophysics Data System (ADS)

Scambelluri, M.; Bebout, G. E.; Gilio, M.; Belmonte, D.; Campomenosi, N.; Crispini, L.

2015-12-01

Release of COH fluids from hydrous minerals and carbonates influences element recycling and magmatism at subduction zones. Contradictory interpretations exist regarding the retention/storage of C in subducting plates and in the forearc to subarc mantle. Multiple lines of evidence indicate mobility of C in forearcs; however, the magnitude of this loss is highly uncertain[1-5]. A poorly constrained fraction of the 40-115 Mt/y of C initially subducted is released into fluids (e.g., by decarbonation, carbonate dissolution), and 18-43 Mt/y is returned at arc volcanoes[2-5, refs. therein]. The imbalance could reflect subduction into the deeper mantle or forearc/subarc storage[4-7]. We examine the fate of C in slab/interface ultramafic rocks, and by analogy serpentinized mantle wedge, via study of fluid-rock evolution of marble and variably carbonated serpentinite (Ligurian Alps). Based on petrography, and major/trace element and C and O isotope compositions, we demonstrate that serpentinite dehydration at 2-2.5 GPa, 550°C released aqueous fluids triggering breakdown of dolomite in nearby marbles, thus releasing C into fluids. Carbonate + olivine veins document flow of COH fluids; interaction of these COH fluids with serpentinite led to formation of high-pressure carbonated ultramafic-rock domains, thus resulting in retention of C in some rocks at an ancient subduction interface. We stress that lithologically complex interfaces could contain sites of both C release and C addition, further confounding estimates of net C loss at forearc and subarc depths [cf 4,5]. Sites of C retention, also including carbonate veins and graphite as reduced carbonate[7], could influence the transfer of slab C to at least the depths beneath volcanic fronts. 1. Poli S et al. 2009 EPSL; 2. Ague and Nicolescu 2014 Nat Geosci; 3. Cook-Collars et al. 2014 Chem Geol; 4. Collins et al. 2015 Chem Geol; 5. Kelemen and Manning 2015 PNAS; 6. Sapienza et al. 2009 CMP; 7 Galvez et al. 2013 Nat Geosci

Basal erosion: barrier to earthquake propagation? Insight from the northern chilean forearc

NASA Astrophysics Data System (ADS)

Cubas, N.

2017-12-01

Subducted topographic features have often been suspected as barriers to large earthquake propagation. These features would induce basal erosion, leading to a large network of fractures impeding large nucleation or shear localization. Looking for correlation between basal erosion and megathrust ruptures is thus critical nowadays to understand earthquake mechanics and infer rupture scenarios. In this study, we propose to seek possible location of basal erosion from the forearc morphology by applying the critical taper theory. We focus on the North Chile subduction zone that has experienced four major earthquakes during the last two decades and where basal erosion and seamount subduction have already been suspected. Basal erosion should occur when the basal friction approaches the internal friction. We thus seek what part of the forearc is at critical state and select areas for which the two frictions are almost equal. We find a large band, located at 25km depth, from the Mejillones peninsula to the Iquique region at critical state with very high basal friction. The critical areas seem to surround the Tocopilla 2007 Mw 7.7 and the Iquique 2014 Mw 8.1 ruptures. When compared with the interseismic coupling, except for the Tocopilla segment, the critical areas are located in low-coupled zones. More interestingly, the reported normal faults of the forearc do not appear above the erosional areas but rather between them. These normal faults are systematically located above locked patches and seismic asperities. These areas are actually at extensional critical state and characterized by a very low effective friction. We thus suspect the extensional features to be related to earthquakes rather than basal erosion. We then look for similar relationships along the Sumatra subduction zone to see if basal erosion is a common process. The Tocopilla and Iquique earthquakes ruptured only part of the northern Chile seismic gap although the full segment was ready for a new large rupture. Areas of basal erosion might have impeded the propagation of these ruptures and could as well delineate the future mega-earthquake.

Geophysical surveys of the Queen Charlotte Fault plate boundary off SE Alaska: Preliminary results

NASA Astrophysics Data System (ADS)

Ten Brink, U. S.; Brothers, D. S.; Andrews, B. D.; Kluesner, J.; Haeussler, P. J.; Miller, N. C.; Watt, J. T.; Dartnell, P.; East, A. E.

2016-12-01

Recent multibeam sonar and high-resolution seismic surveys covering the northern 400-km-long segment of Queen Charlotte Fault off SE Alaska, indicate that the entire 50 mm/yr right-lateral Pacific-North America plate motion is currently accommodated by a single fault trace. The trace is remarkably straight rarely interrupted by step-overs, and is often <100 m wide. It runs along the shelf edge dropping into the slope only in the southern end of the mapped area. The straight and narrow surficial fault expression and its location with respect to the shelf may be due to high sedimentation rate during the collapse of the SE Alaska ice cap 17,000 yr ago, which obliterated the previous surficial deformation. Gravity data suggests that the fault may separate the 15-20 Ma oceanic crust of the Pacific plate from continental forearc and arc terrains of a former subduction zone. This unusual setting for a transform plate boundary might have resulted from the northward passage of the thick crust of the Yakutat Terrane during the Late Cenozoic. A step-over at the mouth of Chatham Strait has formed a 20-km-long 1.6-km-wide pull-apart basin composed of 3 sub-basins. Internal basin stratigraphy indicates possible southward migration of the step-over with time. Slight outward curving of the southern strand may suggest the presence of a deeper barrier there, which could have terminated the northward super-shear rupture of the 2013 M7.5 Craig Earthquake. Whether this possible barrier is related to the intersection of the Aja Fracture Zone with the plate boundary is unclear. No other surficial impediments to rupture were observed along the 315 km trace between this fault step-over and a 20° bend near Icy Point, where the fault extends onshore and becomes highly transpressional. An enigmatic oval depression, 1.5-2 km wide and 500 m deep, south of the step-over and a possible mud volcano north of the step-over, may attest to possible vigorous gas and fluid upwelling along the fault zone.

Inter-plate and intraplate seismotectonic complex deduced from long-term and short-term records of vertical movements of the Sanriku coast on the Northeast Japan forearc

NASA Astrophysics Data System (ADS)

Ishimura, D.; Miyauchi, T.; Kaneda, H.

2012-12-01

The 2011 off the Pacific coast of Tohoku Earthquake (Mw 9.0) was accompanied by wide crustal subsidence (max. 1.2 m) along the Saniku coast on the Northeast Japan forearc, about 150 km distant from the axis of Japan Trench. This fact led us to qualitatively and quantitatively reexamine the component of coseismic, post-seismic and inter-seismic crustal movements in cumulative long-term uplift of the coast on the forearc. We demonstrate a geodynamic diagram of vertical movements of the coast and refer to another possible intraplate earthquake off the coast, based on geomorphological method and subsurface core analysis. Mid-late Pleistocene marine terraces indicating the average uplift rate of 0.2-0.4 mm/yr are well developed along the northern part of the Sanriku coast. Holocene intermittently emergent shoreline topography is partially recognized at two levels, 4 m and 2 m in altitude. The 14C dates and lithofacies of geologic cores indicate the tendency of successive subsidence and the seeming subsidence rate of 3 mm/yr in Holocene. Recent tidal data show the faster subsidence rate of 5-9 mm/yr in the last 50 years. Furthermore, no historical large earthquakes with distinct coastal uplifts are documented in the last 1200 years. Such complex vertical movement of the Sanriku coast suggests that another unusual coseismic uplift different from the 2011's M9 earthquake occurred during continuous inter-seismic crustal subsidence, which was accompanied by vertical uplift of 5 m along the northern Sanriku coast. The seismic source fault is estimated be under a 150 km long flexural scarp, 20 km off the coast. The expected magnitude and recurrence interval of offshore earthquakes are more than M8 and 1500 years, respectively. This episodic co-seismic uplift by intraplate great earthquakes quantitatively excelled the inter-seismic subsidence by the drag of coupling of plates and the coseismic subsidence at gigantic plate boundary earthquakes, and the total plus balance in vertical movements has possibly produced the sequence of Pleistocene marine terraces corresponding to interglacial high sea-level stands.

87Sr/86Sr in Gypsic Relict Soils and Paleosols of Hyperarid Settings as a Paleoaltitude Proxy: Results for Northern Chile (19.5-21.7°S)

NASA Astrophysics Data System (ADS)

Jordan, T. E.; Cosentino, N. J.

2014-12-01

We have developed a new altimeter proxy based on the 87Sr/86Sr ratio of surficial accumulations of salts in hyperarid settings. Under hyperarid conditions like in the Andean forearc in northern Chile at altitudes below ~3000 m.a.s.l., gypsum and other soluble salts form saline soils. The altimeter is based on the first-order topographic control on the extent of inland incursion of fog-transported marine aerosols derived from the Pacific Ocean. Once this fog is evaporated it deposits calcium sulfates with a marine 87Sr/86Sr signal. At positions in the landscape not reached by marine aerosols, calcium sulfates have no marine source, except by eolian reworking, and have a lower 87Sr/86Sr. 87Sr/86Sr values for Holocene accumulations of salts show a bimodal distribution: high values between 225-1075 m.a.s.l. (0.70807 ± 0.00004) and low values below and above those altitude thresholds (0.70746 ± 0.00010). We sampled dated gypsic relict soils and Gypsisols to study post-5 Ma surface height evolution using this method, after correcting for changes in the altitudinal structure of the paleo-fog zone with time. Locations spanning ~250 km strike-parallel distance within the forearc and at elevations between 450-1650 m.a.s.l. display moderate amounts of altitudinal change during the Pliocene, Pleistocene and Quaternary. Site results include two in the northern zone (19.5ºS and 19.65ºS) that experienced maximum net surface uplifts of ~350 m and ~600 m since 2.5 ± 0.5 Ma and ~2.6 Ma, respectively. Locations at ~21.4°S display an estimated minimum net decline in altitude of ~250 m since 3.4 ± 1.1 Ma and ~200 m since 1.1 ± 0.4 Ma. These constraints will shed light on the geodynamic processes responsible for surface elevation change, by acting as boundary conditions to numerical models of the Andean forearc.

Anatomy of the western Java plate interface from depth-migrated seismic images

NASA Astrophysics Data System (ADS)

Kopp, H.; Hindle, D.; Klaeschen, D.; Oncken, O.; Reichert, C.; Scholl, D.

2009-11-01

Newly pre-stack depth-migrated seismic images resolve the structural details of the western Java forearc and plate interface. The structural segmentation of the forearc into discrete mechanical domains correlates with distinct deformation styles. Approximately 2/3 of the trench sediment fill is detached and incorporated into frontal prism imbricates, while the floor sequence is underthrust beneath the décollement. Western Java, however, differs markedly from margins such as Nankai or Barbados, where a uniform, continuous décollement reflector has been imaged. In our study area, the plate interface reveals a spatially irregular, nonlinear pattern characterized by the morphological relief of subducted seamounts and thicker than average patches of underthrust sediment. The underthrust sediment is associated with a low velocity zone as determined from wide-angle data. Active underplating is not resolved, but likely contributes to the uplift of the large bivergent wedge that constitutes the forearc high. Our profile is located 100 km west of the 2006 Java tsunami earthquake. The heterogeneous décollement zone regulates the friction behavior of the shallow subduction environment where the earthquake occurred. The alternating pattern of enhanced frictional contact zones associated with oceanic basement relief and weak material patches of underthrust sediment influences seismic coupling and possibly contributed to the heterogeneous slip distribution. Our seismic images resolve a steeply dipping splay fault, which originates at the décollement and terminates at the sea floor and which potentially contributes to tsunami generation during co-seismic activity.

Atmospheric Ar and Ne returned from mantle depths to the Earth's surface by forearc recycling.

PubMed

Baldwin, Suzanne L; Das, J P

2015-11-17

In subduction zones, sediments, hydrothermally altered lithosphere, fluids, and atmospheric gases are transported into the mantle, where ultrahigh-pressure (UHP) metamorphism takes place. However, the extent to which atmospheric noble gases are trapped in minerals crystallized during UHP metamorphism is unknown. We measured Ar and Ne trapped in phengite and omphacite from the youngest known UHP terrane on Earth to determine the composition of Ar and Ne returned from mantle depths to the surface by forearc recycling. An (40)Ar/(39)Ar age [7.93 ± 0.10 My (1σ)] for phengite is interpreted as the timing of crystallization at mantle depths and indicates that (40)Ar/(39)Ar phengite ages reliably record the timing of UHP metamorphism. Both phengite and omphacite yielded atmospheric (38)Ar/(36)Ar and (20)Ne/(22)Ne. Our study provides the first documentation, to our knowledge, of entrapment of atmospheric Ar and Ne in phengite and omphacite. Results indicate that a subduction barrier for atmospheric-derived noble gases does not exist at mantle depths associated with UHP metamorphism. We show that the crystallization age together with the isotopic composition of nonradiogenic noble gases trapped in minerals formed during subsolidus crystallization at mantle depths can be used to unambiguously assess forearc recycling of atmospheric noble gases. The flux of atmospheric noble gas entering the deep Earth through subduction and returning to the surface cannot be fully realized until the abundances of atmospheric noble gases trapped in exhumed UHP rocks are known.

Anatomy of the western Java plate interface from depth-migrated seismic images

USGS Publications Warehouse

Kopp, H.; Hindle, D.; Klaeschen, D.; Oncken, O.; Reichert, C.; Scholl, D.

2009-01-01

Newly pre-stack depth-migrated seismic images resolve the structural details of the western Java forearc and plate interface. The structural segmentation of the forearc into discrete mechanical domains correlates with distinct deformation styles. Approximately 2/3 of the trench sediment fill is detached and incorporated into frontal prism imbricates, while the floor sequence is underthrust beneath the d??collement. Western Java, however, differs markedly from margins such as Nankai or Barbados, where a uniform, continuous d??collement reflector has been imaged. In our study area, the plate interface reveals a spatially irregular, nonlinear pattern characterized by the morphological relief of subducted seamounts and thicker than average patches of underthrust sediment. The underthrust sediment is associated with a low velocity zone as determined from wide-angle data. Active underplating is not resolved, but likely contributes to the uplift of the large bivergent wedge that constitutes the forearc high. Our profile is located 100 km west of the 2006 Java tsunami earthquake. The heterogeneous d??collement zone regulates the friction behavior of the shallow subduction environment where the earthquake occurred. The alternating pattern of enhanced frictional contact zones associated with oceanic basement relief and weak material patches of underthrust sediment influences seismic coupling and possibly contributed to the heterogeneous slip distribution. Our seismic images resolve a steeply dipping splay fault, which originates at the d??collement and terminates at the sea floor and which potentially contributes to tsunami generation during co-seismic activity. ?? 2009 Elsevier B.V.

Low temperature dissolution creep induced B-type olivine fabric during serpentinization and deformation in mantle wedge

NASA Astrophysics Data System (ADS)

Liu, W.; Zhang, J.

2017-12-01

The B-type olivine fabric (i.e., the [010]ol axes subnormal to foliation and the [001]ol axes subparallel to the lineation) has been regarded as an important olivine fabric for interpreting global trench-parallel S-wave polarization in fore-arc regions. However, strong serpentinization and cold temperature environment in the mantle wedge should inhibit development of the B-type olivine fabric that requires high temperature to activate solid-state plastic deformation. Here we report fabrics of olivine and antigorite generated at low temperatures (300-370 oC) during serpentinization in a fossil mantle wedge of the Val Malenco area, Central Alps. Olivine in the serpentine matrix develops a pronounced B-type fabric, while antigorite in the same matrix displays a strong crystallographic orientation (CPO) with the (001) and the [010] subparallel to foliation and lineation, respectively. The following evidence leads to the conclusion that the B-type olivine fabric is resulted from dissolution creep assisted by grain boundaries sliding (GBS) and grain rotation, rather than solid-state plastic deformation: (1) serpentinization took place at low temperatures and a fluid-enriched environment, ideal for dissolution-precipitation creep; (2) the voids and zigzag boundaries along the interface between antigorite and olivine suggest a fluid dissolution reaction; (3) the primary coarse olivine develops a nearly random fabric, indicating the B-type fabrics in the fine-grained olivine can't be inherited fabrics. These results document for the first time the B-type olivine CPO formed by dissolution creep at low temperatures during serpentinization and provide a mechanism to reconcile petrofabric observations with geophysical observations of trench parallel fast S-wave seismic anisotropy in fore-arc mantle wedge regions.

B-type olivine fabric induced by low temperature dissolution creep during serpentinization and deformation in mantle wedge

NASA Astrophysics Data System (ADS)

Liu, Wenlong; Zhang, Junfeng; Barou, Fabrice

2018-01-01

The B-type olivine fabric (i.e., the [010] axes subnormal to foliation and the [001] axes subparallel to the lineation) has been regarded as an important olivine fabric for interpreting global trench-parallel S-wave polarization in fore-arc regions. However, strong serpentinization and cold temperature environment in the mantle wedge should inhibit development of the B-type olivine fabric that requires high temperature to activate solid-state plastic deformation. Here we report fabrics of olivine and antigorite generated at low temperatures (300-370 °C) during serpentinization in a fossil mantle wedge of the Val Malenco area, Central Alps. Olivine in the serpentine matrix develops a pronounced B-type fabric, while antigorite in the same matrix displays a strong crystallographic preferred orientation (CPO) with the (001) planes and the [010] axes subparallel to foliation and lineation, respectively. The following evidence leads to the conclusion that the B-type olivine fabric results from dissolution creep assisted by grain boundary sliding (GBS) and grain rotation, rather than solid-state plastic deformation: (1) serpentinization took place at low temperatures and a fluid-enriched environment, ideal for dissolution-precipitation creep; (2) the voids and zigzag boundaries along the interface between antigorite and olivine suggest a fluid dissolution reaction; (3) the primary coarse olivine develops a nearly random fabric, indicating the B-type fabrics in the fine-grained olivine may not be inherited fabrics. These results document for the first time the B-type olivine CPO formed by dissolution creep at low temperatures during serpentinization and provide a mechanism to reconcile petrofabric observations with geophysical observations of trench parallel fast S-wave seismic anisotropy in fore-arc mantle wedge regions.

Implications of Eocene-age Philippine Sea and forearc basalts for initiation and early history of the Izu-Bonin-Mariana arc

NASA Astrophysics Data System (ADS)

Yogodzinski, Gene M.; Bizimis, Michael; Hickey-Vargas, Rosemary; McCarthy, Anders; Hocking, Benjamin D.; Savov, Ivan P.; Ishizuka, Osamu; Arculus, Richard

2018-05-01

Whole-rock isotope ratio (Hf, Nd, Pb, Sr) and trace element data for basement rocks at ocean drilling Sites U1438, 1201 and 447 immediately west of the KPR (Kyushu-Palau Ridge) are compared to those of FAB (forearc basalts) previously interpreted to be the initial products of IBM subduction volcanism. West-of-KPR basement basalts (drill sites U1438, 1201, 447) and FAB occupy the same Hf-Nd and Pb-Pb isotopic space and share distinctive source characteristics with εHf mostly > 16.5 and up to εHf = 19.8, which is more radiogenic than most Indian mid-ocean ridge basalts (MORB). Lead isotopic ratios are depleted, with 206Pb/204Pb = 17.8-18.8 accompanying relatively high 208Pb/204Pb, indicating an Indian-MORB source unlike that of West Philippine Basin plume basalts. Some Sr isotopes show affects of seawater alteration, but samples with 87Sr/86Sr < 0.7034 and εNd > 8.0 appear to preserve magmatic compositions and also indicate a common source for west-of-KPR basement and FAB. Trace element ratios resistant to seawater alteration (La/Yb, Lu/Hf, Zr/Nb, Sm/Nd) in west-of-KPR basement are generally more depleted than normal MORB and so also appear similar to FAB. At Site U1438, only andesite sills intruding sedimentary rocks overlying the basement have subduction-influenced geochemical characteristics (εNd ∼ 6.6, εHf ∼ 13.8, La/Yb > 2.5, Nd/Hf ∼ 9). The key characteristic that unites drill site basement rocks west of KPR and FAB is the nature of their source, which is more depleted in lithophile trace elements than average MORB but with Hf, Nd, and Pb isotope ratios that are common in MORB. The lithophile element-depleted nature of FAB has been linked to initiation of IBM subduction in the Eocene, but Sm-Nd model ages and errorchron relationships in Site U1438 basement indicate that the depleted character of the rocks is a regional characteristic that was produced well prior to the time of subduction initiation and persists today in the source of modern IBM arc volcanic rocks with Sm/Nd > 0.34 and εNd ∼ 9.0.

Quantitative reconstruction of cross-sectional dimensions and hydrological parameters of gravelly fluvial channels developed in a forearc basin setting under a temperate climatic condition, central Japan

NASA Astrophysics Data System (ADS)

Shibata, Kenichiro; Adhiperdana, Billy G.; Ito, Makoto

2018-01-01

Reconstructions of the dimensions and hydrological features of ancient fluvial channels, such as bankfull depth, bankfull width, and water discharges, have used empirical equations developed from compiled data-sets, mainly from modern meandering rivers, in various tectonic and climatic settings. However, the application of the proposed empirical equations to an ancient fluvial succession should be carefully examined with respect to the tectonic and climatic settings of the objective deposits. In this study, we developed empirical relationships among the mean bankfull channel depth, bankfull channel depth, drainage area, bankfull channel width, mean discharge, and bankfull discharge using data from 24 observation sites of modern gravelly rivers in the Kanto region, central Japan. Some of the equations among these parameters are different from those proposed by previous studies. The discrepancies are considered to reflect tectonic and climatic settings of the present river systems, which are characterized by relatively steeper valley slope, active supply of volcaniclastic sediments, and seasonal precipitation in the Kanto region. The empirical relationships derived from the present study can be applied to modern and ancient gravelly fluvial channels with multiple and alternate bars, developed in convergent margin settings under a temperate climatic condition. The developed empirical equations were applied to a transgressive gravelly fluvial succession of the Paleogene Iwaki Formation, Northeast Japan as a case study. Stratigraphic thicknesses of bar deposits were used for estimation of the bankfull channel depth. In addition, some other geomorphological and hydrological parameters were calculated using the empirical equations developed by the present study. The results indicate that the Iwaki Formation fluvial deposits were formed by a fluvial system that was represented by the dimensions and discharges of channels similar to those of the middle to lower reaches of the modern Kuji River, northern Kanto region. In addition, no distinct temporal changes in paleochannel dimensions and discharges were observed in an overall transgressive Iwaki Formation fluvial system. This implies that a rise in relative sea level did not affect the paleochannel dimensions within a sequence stratigraphic framework.

A record of spontaneous subduction initiation in the Izu-Bonin-Mariana arc

NASA Astrophysics Data System (ADS)

Arculus, Richard J.; Ishizuka, Osamu; Bogus, Kara A.; Gurnis, Michael; Hickey-Vargas, Rosemary; Aljahdali, Mohammed H.; Bandini-Maeder, Alexandre N.; Barth, Andrew P.; Brandl, Philipp A.; Drab, Laureen; Do Monte Guerra, Rodrigo; Hamada, Morihisa; Jiang, Fuqing; Kanayama, Kyoko; Kender, Sev; Kusano, Yuki; Li, He; Loudin, Lorne C.; Maffione, Marco; Marsaglia, Kathleen M.; McCarthy, Anders; Meffre, Sebastién; Morris, Antony; Neuhaus, Martin; Savov, Ivan P.; Sena, Clara; Tepley, Frank J., III; van der Land, Cees; Yogodzinski, Gene M.; Zhang, Zhaohui

2015-09-01

The initiation of tectonic plate subduction into the mantle is poorly understood. If subduction is induced by the push of a distant mid-ocean ridge or subducted slab pull, we expect compression and uplift of the overriding plate. In contrast, spontaneous subduction initiation, driven by subsidence of dense lithosphere along faults adjacent to buoyant lithosphere, would result in extension and magmatism. The rock record of subduction initiation is typically obscured by younger deposits, so evaluating these possibilities has proved elusive. Here we analyse the geochemical characteristics of igneous basement rocks and overlying sediments, sampled from the Amami Sankaku Basin in the northwest Philippine Sea. The uppermost basement rocks are areally widespread and supplied via dykes. They are similar in composition and age--as constrained by the biostratigraphy of the overlying sediments--to the 52-48-million-year-old basalts in the adjacent Izu-Bonin-Mariana fore-arc. The geochemical characteristics of the basement lavas indicate that a component of subducted lithosphere was involved in their genesis, and the lavas were derived from mantle source rocks that were more melt-depleted than those tapped at mid-ocean ridges. We propose that the basement lavas formed during the inception of Izu-Bonin-Mariana subduction in a mode consistent with the spontaneous initiation of subduction.

Imaging fluid-related subduction processes beneath Central Java (Indonesia) using seismic attenuation tomography

NASA Astrophysics Data System (ADS)

Bohm, Mirjam; Haberland, Christian; Asch, Günter

2013-04-01

We use local earthquake data observed by the amphibious, temporary seismic MERAMEX array to derive spatial variations of seismic attenuation (Qp) in the crust and upper mantle beneath Central Java. The path-averaged attenuation values (t∗) of a high quality subset of 84 local earthquakes were calculated by a spectral inversion technique. These 1929 t∗-values inverted by a least-squares tomographic inversion yield the 3D distribution of the specific attenuation (Qp). Analysis of the model resolution matrix and synthetic recovery tests were used to investigate the confidence of the Qp-model. We notice a prominent zone of increased attenuation beneath and north of the modern volcanic arc at depths down to 15 km. Most of this anomaly seems to be related to the Eocene-Miocene Kendeng Basin (mainly in the eastern part of the study area). Enhanced attenuation is also found in the upper crust in the direct vicinity of recent volcanoes pointing towards zones of partial melts, presence of fluids and increased temperatures in the middle to upper crust. The middle and lower crust seems not to be associated with strong heating and the presence of melts throughout the arc. Enhanced attenuation above the subducting slab beneath the marine forearc seems to be due to the presence of fluids.

Late Proterozoic transpression on the Nabitah fault system-implications for the assembly of the Arabian Shield

USGS Publications Warehouse

Quick, J.E.

1991-01-01

The longest proposed suture zone in Saudi Arabia, the Nabitah suture, can be traced as a string of ophiolite complexes for 1200 km along the north-south axis of the Arabian Shield. Results of a field study in the north-central shield between 23?? and 26??N indicate that the Nabitah suture is indeed a major crustal discontinuity across which hundreds of kilometers of displacement may have occurred on north-south trending, subvertical faults of the Nabitah fault system. Although not a unique solution, many structures within and near these faults can be reconciled with transpression, i.e., convergent strike-slip, and syntectonic emplacement of calc-alkaline plutonic rocks. Transcurrent motion on the Nabitah fault system appears to have began prior to 710 Ma, was active circa 680 Ma, and terminated prior to significant left-lateral, strike slip on the Najd fault system, which began sometime after 650 Ma. Northwest-directed subduction in the eastern shield could have produced the observed association of calc-alkaline magmatism and left-lateral transpressive strike slip, and is consistent with interpretation of the Abt schist and sedimentary rocks of the Murdama group as relics of the associated accretionary wedge and fore-arc basin. ?? 1991.

Plate coupling across the northern Manila subduction zone deduced from mantle lithosphere buoyancy

NASA Astrophysics Data System (ADS)

Lo, Chung-Liang; Doo, Wen-Bin; Kuo-Chen, Hao; Hsu, Shu-Kun

2017-12-01

The Manila subduction zone is located at the plate boundary where the Philippine Sea plate (PSP) moves northwestward toward the Eurasian plate (EU) with a high convergence rate. However, historically, no large earthquakes greater than Mw7 have been observed across the northern Manila subduction zone. The poorly understood plate interaction between these two plates in this region creates significant issues for evaluating the seismic hazard. Therefore, the variation of mantle lithospheric buoyancy is calculated to evaluate the plate coupling status across the northern Manila subduction zone, based on recently published forward gravity modeling constrained by the results of the P-wave seismic crustal structure of the TAIGER (Taiwan Integrated Geodynamic Research) project. The results indicate weak plate coupling between the PSP and EU, which could be related to the release of the overriding PSP from the descending EU's dragging force, which was deduced from the higher elevation of the Luzon arc and the fore-arc basin northward toward the Taiwan orogen. Moreover, serpentinized peridotite is present above the plate boundary and is distributed more widely and thickly closer to offshore southern Taiwan orogen. We suggest that low plate coupling may facilitate the uplifting of serpentinized mantle material up to the plate boundary.

Late Jurassic plutonism in the southwest U.S. Cordillera

USGS Publications Warehouse

Barth, A.P.; Wooden, J.L.; Howard, K.A.; Richards, J.L.

2008-01-01

Although plate reconstructions suggest that subduction was an approximately steady-state process from the mid-Mesozoic through the early Tertiary, recent precise geochronologic studies suggest highly episodic emplacement of voluminous continental-margin batholiths in the U.S. Cordillera. In central and southern California and western Arizona, major episodes of batholithic magmatism are known to have occurred in Permian-Triassic, Middle Jurassic, and late Early to Late Cretaceous time. However, recent studies of forearc-basin and continental-interior sediments suggest that Late Jurassic time was probably also a period of significant magmatism, although few dated plutons of this age have been recognized. We describe a belt of Late Jurassic plutonic and hypabyssal rocks at least 200 km in length that extends from the northwestern Mojave Desert through the Transverse Ranges. The belt lies outboard of both the voluminous Middle Jurassic arc and the ca. 148 Ma Independence dike swarm at these latitudes. The plutons include two intrusive suites emplaced between 157 and 149 Ma: a calc-alkaline suite compositionally unlike Permian-Triassic and Middle Jurassic mon-zonitic suites but similar to Late Cretaceous arc plutons emplaced across this region, and a contemporaneous but not comagmatic alkaline suite. The Late Jurassic was thus a time of both tectonic and magmatic transitions in the southern Cordillera. ?? 2008 The Geological Society of America.

Back-arc spreading of the northern Izu-Ogasawara (Bonin) Islands arc clarified by GPS data

NASA Astrophysics Data System (ADS)

Nishimura, Takuya

2011-11-01

We examined GPS data in the northwestern Pacific region, which includes the Izu-Ogasawara (Bonin)-Mariana (IBM) arc and the Japan arc. GPS velocity vectors on the Izu Islands, including Hachijo-jima and Aoga-shima, show systematic eastward movement deviating from that predicted by the rigid rotation of the Philippine Sea plate; this deviation supports the active back-arc spreading model suggested by previous geological studies. The results of a statistical F-test analysis with 99% confidence level showed that the forearc of the Izu Islands arc has an independent motion with respect to the rigid part of the Philippine Sea plate. We developed a kinematic block-fault model to estimate both rigid rotations of crustal blocks and elastic deformation due to locked faults on the block boundaries. The model suggests that the back-arc opening rate along the Izu back-arc rift zone ranges from 2 mm/yr at its southern end to 9 mm/yr near Miyake-jima, its northern end. It also predicts 23-28 mm/yr of relative motion along the Sagami Trough in the direction of ~ N25°W, where the Izu forearc subducts beneath central Japan. The orientation of this motion is supported by slip vectors of recent medium-size earthquakes, repeated slow-slip events, and the 1923 M = 7.9 Kanto earthquake.

Renewed uplift of the Central Andes Forearc revealed by coastal evolution during the Quaternary

NASA Astrophysics Data System (ADS)

Regard, Vincent; Saillard, Marianne; Martinod, Joseph; Audin, Laurence; Carretier, Sébastien; Pedoja, Kevin; Riquelme, Rodrigo; Paredes, Paola; Hérail, Gérard

2010-08-01

Most of the Pacific coast of the Central Andes, between 15°S and 30°S, display a wide (a couple of kilometres) planar feature, gently dipping oceanwards and backed by a cliff. This morphology, usually of marine origin, is called rasa, and argues for a recent and spatially continuous uplift of the margin over the 1500-km-long coastal region we describe. The cliff foot is found at a similar elevation (˜ 110 m amsl) all over the studied area, with the exception of peninsulas such as the Mejillones Peninsula. The compilation of published chronological data and the extrapolation of re-appraised uplift rates provide evidence for a common cliff foot age of around 400 ka (i.e., Marine Isotopic Stage MIS 11). This, together with other geological constraints, indicates a Quaternary renewal of uplift in the Central Andes Forearc after a late Pliocene quiescence or subsidence.

Slip Inversion Along Inner Fore-Arc Faults, Eastern Tohoku, Japan

NASA Astrophysics Data System (ADS)

Regalla, Christine; Fisher, Donald M.; Kirby, Eric; Oakley, David; Taylor, Stephanie

2017-11-01

The kinematics of deformation in the overriding plate of convergent margins may vary across timescales ranging from a single seismic cycle to many millions of years. In Northeast Japan, a network of active faults has accommodated contraction across the arc since the Pliocene, but several faults located along the inner fore arc experienced extensional aftershocks following the 2011 Tohoku-oki earthquake, opposite that predicted from the geologic record. This observation suggests that fore-arc faults may be favorable for stress triggering and slip inversion, but the geometry and deformation history of these fault systems are poorly constrained. Here we document the Neogene kinematics and subsurface geometry of three prominent fore-arc faults in Tohoku, Japan. Geologic mapping and dating of growth strata provide evidence for a 5.6-2.2 Ma initiation of Plio-Quaternary contraction along the Oritsume, Noheji, and Futaba Faults and an earlier phase of Miocene extension from 25 to 15 Ma along the Oritsume and Futaba Faults associated with the opening of the Sea of Japan. Kinematic modeling indicates that these faults have listric geometries, with ramps that dip 40-65°W and sole into subhorizontal detachments at 6-10 km depth. These fault systems can experience both normal and thrust sense slip if they are mechanically weak relative to the surrounding crust. We suggest that the inversion history of Northeast Japan primed the fore arc with a network of weak faults mechanically and geometrically favorable for slip inversion over geologic timescales and in response to secular variations in stress state associated with the megathrust seismic cycle.

Crustal-Scale Seismic Structure From Trench to Forearc in the Cascadia Subduction Zone

NASA Astrophysics Data System (ADS)

Rathnayaka, Sampath; Gao, Haiying

2017-09-01

The (de)hydration process and the amount of hydrated sediment carried by the downgoing oceanic plate play a key role in the subduction dynamics. A high-resolution shear velocity model from the crust down to the uppermost mantle, extending from trench to forearc, is constructed in the northern Cascadia subduction zone to investigate seismic characteristics related to slab deformation and (de)hydration at the plate boundary. A total of 220 seismic stations are used, including the Cascadia Initiative Amphibious Array and inland broadband and short-period stations. The empirical Green's functions extracted from continuous ambient noise data from 2006 to 2014 provide high-quality Rayleigh wave signals at periods of 4-50 s. We simulate wave propagation using finite difference method to generate station Strain Green's Tensors and synthetic waveforms. The phase delays of Rayleigh waves between the observed and synthetic data are measured at multiple period ranges. We then invert for the velocity perturbations from the reference model and progressively improve the model resolution. Our tomographic imaging shows many regional- and local-scale low-velocity features, which are possibly related to slab (de)hydration from the oceanic plate to the overriding plate. Specifically, we observe (1) NW-SE oriented linear low-velocity features across the trench, indicating hydration of the oceanic plate induced by bending-related faultings; (2) W-E oriented fingerlike low-velocity structures off the continental margins due to dehydration of the Juan de Fuca plate; and (3) seismic lows atop the plate interface beneath the Washington forearc, indicating fluid-rich sediments subducted and overthrusted at the accretionary wedge.

Atmospheric Ar and Ne returned from mantle depths to the Earth’s surface by forearc recycling

PubMed Central

Baldwin, Suzanne L.; Das, J. P.

2015-01-01

In subduction zones, sediments, hydrothermally altered lithosphere, fluids, and atmospheric gases are transported into the mantle, where ultrahigh-pressure (UHP) metamorphism takes place. However, the extent to which atmospheric noble gases are trapped in minerals crystallized during UHP metamorphism is unknown. We measured Ar and Ne trapped in phengite and omphacite from the youngest known UHP terrane on Earth to determine the composition of Ar and Ne returned from mantle depths to the surface by forearc recycling. An 40Ar/39Ar age [7.93 ± 0.10 My (1σ)] for phengite is interpreted as the timing of crystallization at mantle depths and indicates that 40Ar/39Ar phengite ages reliably record the timing of UHP metamorphism. Both phengite and omphacite yielded atmospheric 38Ar/36Ar and 20Ne/22Ne. Our study provides the first documentation, to our knowledge, of entrapment of atmospheric Ar and Ne in phengite and omphacite. Results indicate that a subduction barrier for atmospheric-derived noble gases does not exist at mantle depths associated with UHP metamorphism. We show that the crystallization age together with the isotopic composition of nonradiogenic noble gases trapped in minerals formed during subsolidus crystallization at mantle depths can be used to unambiguously assess forearc recycling of atmospheric noble gases. The flux of atmospheric noble gas entering the deep Earth through subduction and returning to the surface cannot be fully realized until the abundances of atmospheric noble gases trapped in exhumed UHP rocks are known. PMID:26542683

A tale of phenocrysts: trace element contents of boninites and forearc basalts from IODP Expedition 352

NASA Astrophysics Data System (ADS)

Chapman, T.; Clarke, G. L.; Reagan, M. K.; Sakuyama, T.; Godard, M.; Shervais, J. W.; Prytulak, J.; Shimizu, K.; Nelson, W. R.; Heaton, D. E.; Whattam, S. A.; Li, H.; Pearce, J. A.

2016-12-01

The Izu-Bonin Mariana (IBM) forearc represents an ideal location to study the dynamics of subduction initiation and to reveal the volcanic sequences appropriate to assess ophiolite origins. The volcanic stratigraphy recovered on Expedition 352 illustrates an abrupt shift from forearc basalt (FAB) to boninite magmatism, with limited transitional rock types, as observed from submersible and previous drill work in the Izu-Bonin and Mariana sections. The transition represents a change from decompression melting to fluxed melting of the mantle wedge. The volcanic stratigraphy has several distinct boninite chemical evolution trends (basaltic boninite, low- and high-silica boninite). Mineral assemblages and phenocryst trace element compositions vary throughout the volcanic sequence providing an opportunity to explore more completely boninite and FAB transitions and petrogenesis. FABs are characterised by early plagioclase crystallization and HREE enriched clinopyroxene with high Ti contents. Basaltic boninite and some low-silica boninite lavas have overlapping REE concentrations consistent with early plagioclase growth preceded by clinopyroxene. In contrast, textures and HREE depleted concentrations of clinopyroxene in high-silica boninite imply late plagioclase growth relative to olivine and orthopyroxene. Variations in mineral compositions and paragenesis in boninites reflect changes in magma compositions and a progressive depletion of mantle sources over time. This is illustrated via key incompatible and compatible trace element ratios and concentrations (e.g. Zr/Ti & V or Cr). The transition from FAB to low-Si boninite was subtle in terms of mineral modes, but was more evident in terms of the phase and lava compositions.

Quantification of in situ pore pressure and stress in regions of low frequency earthquakes and anomalously low seismic velocity at the Nankai Trough

NASA Astrophysics Data System (ADS)

Kitajima, H.; Saffer, D. M.

2012-12-01

Recent seismic reflection and ocean bottom seismometer (OBS) studies reveal broad regions of low seismic velocity along the megathrust plate boundary of the Nankai subduction zone offshore SW Japan. These low velocity zones (LVZ's) extend to ~55 km from the trench, corresponding to depths of >~10 km below sea floor. Elevated pore pressure has been invoked as one potential cause of both the LVZ's and very low frequency earthquakes (VLFE) in the outer forearc. Here, we estimate the in-situ pore fluid pressure and stress state within these LVZ's by combining P-wave velocities (Vp) obtained from seismic reflection and OBS data with well-constrained empirical relations between (1) P-wave velocity and porosity; and (2) porosity and effective mean and differential stresses, defined by triaxial deformation tests on drill core samples of the incoming oceanic sediment. We used cores of Lower Shikoku Basin (LSB) hemipelagic mudstone (322-C0011B-19R-5, initial porosity of 43%), and Middle Shikoku Basin (MSB) tuffaceous sandstone (333-C0011D-51X-2, initial porosity of 46%) that have been recovered from IODP Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) Site C0011 (~20 km seaward from the deformation front). Samples were loaded under a range of different stress paths including isotropic loading, triaxial compression, and triaxial extension. During the tests, all pressures, axial displacement, and pore volume change were continuously monitored; and ultrasonic velocity and permeability were measured at regular intervals. The relationship between Vp and porosity for LSB mudstone is independent of stress path, and is well fit by an empirical function derived by Hoffman and Tobin [2004] for LSB sediments sampled by drilling along Muroto transect, located ~150 km southwest of the NanTroSEIZE study area. The MSB sandstone exhibits slightly higher P-wave velocity than LSB mudstone at a given porosity. Based on our experimental results, and assuming that the sediments in the LVZ's are at shear failure defined by a critical state stress condition, we estimate that effective vertical stress in the LVZ ranges from 15 MPa at 13 km landward of the trench, to 41 MPa at a distance of 55 km. The maximum horizontal effective stress ranges from 41-124 MPa over this region. Excess pore fluid pressure ranges from 15-81 MPa, corresponding to modified pore pressure ratios, λ* of 0.44-0.73. If LVZ is composed dominantly of sandstones, both the effective vertical and horizontal stresses would be lower, and the excess pore pressure would be higher, with pore pressure ratios λ* = 0.31-0.90. Our results suggest that the sediments have been loaded under poorly drained conditions, and that pore fluids support ≥~53-91 % of the overburden stress along the base of the accretionary wedge across the outer forearc. The low effective stress should lead to a mechanically weak plate boundary, and is spatially correlated with well-located low-frequency earthquakes in the outer accretionary wedge. The heterogeneous distribution of inferred pore pressure also suggests that fluid sources and drainage are localized and possibly transient.

Structure and age of the Lower Magdalena Valley basin basement, northern Colombia: New reflection-seismic and U-Pb-Hf insights into the termination of the central andes against the Caribbean basin

NASA Astrophysics Data System (ADS)

Mora-Bohórquez, J. Alejandro; Ibánez-Mejia, Mauricio; Oncken, Onno; de Freitas, Mario; Vélez, Vickye; Mesa, Andrés; Serna, Lina

2017-03-01

Detailed interpretations of reflection seismic data and new U-Pb and Hf isotope geochemistry in zircon, reveal that the basement of the Lower Magdalena Valley basin is the northward continuation of the basement terranes of the northern Central Cordillera, and thus that the Lower Magdalena experienced a similar pre-Cenozoic tectonic history as the latter. New U-Pb and Hf analyses of zircon from borehole basement samples retrieved in the basin show that the southeastern region consists of Permo-Triassic (232-300Ma) metasediments, which were intruded by Late Cretaceous (75-89 Ma) granitoids. In the northern Central Cordillera, west of the Palestina Fault System, similar Permo-Triassic terranes are also intruded by Late Cretaceous felsic plutons and display ESE-WNW-trending structures. Therefore, our new data and analyses prove not only the extension of the Permo-Triassic Tahamí-Panzenú terrane into the western Lower Magdalena, but also the along-strike continuity of the Upper Cretaceous magmatic arc of the northern Central Cordillera, which includes the Antioquia Batholith and related plutons. Hf isotopic analyses from the Upper Cretaceous Bonga pluton suggest that it intruded new crust with oceanic affinity, which we interpret as the northern continuation of a Lower Cretaceous oceanic terrane (Quebradagrande?) into the westernmost Lower Magdalena. Volcanic andesitic basement predominates in the northwestern Lower Magdalena while Cretaceous low-grade metamorphic rocks that correlate with similar terranes in the Sierra Nevada de Santa Marta and Guajira are dominant in the northeast, suggesting that the Tahamí-Panzenú terrane does not extend into the northern Lower Magdalena. Although the northeastern region of the Lower Magdalena has a similar NE-SW fabric as the San Lucas Ridge of the northeastern Central Cordillera and the Sierra Nevada de Santa Marta, lithologic and geochronologic data suggest that the San Lucas terrane terminates to the north against the northeastern Lower Magdalena, as the Palestina Fault System bends to the NE. The NE-SW trend of basement faults in the northeastern Lower Magdalena is probably inherited from the Jurassic rifting event which is responsible for the conspicuous fabric of surrounding terranes outcropping to the east of the Palestina Fault System, while the ESE-WNW trend in the western Lower Magdalena is inherited from a Late Cretaceous to Eocene strike-slip and extension episode that is widely recognized in the western Andean forearc from Ecuador to Colombia.

Geological characteristics of the Shinkai Seep Field, a serpentinite-hosted ecosystem in the Southern Mariana Forearc

NASA Astrophysics Data System (ADS)

Ohara, Y.; Stern, R. J.; Martinez, F.; Michibayashi, K.; Reagan, M. K.; Fujikura, K.; Watanabe, H.; Ishii, T.; Kelley, K. A.

2012-12-01

Most hydrothermal vents along mid-ocean spreading ridges are high-temperature, sulfide-rich, and low pH (acidic environments). For this reason, the discovery of the Lost City hydrothermal field on the Mid-Atlantic Ridge has stimulated interest in the role of serpentinization of peridotite in generating H2- and CH4-rich fluids and associated carbonate chimneys, as well as in the biological communities adapted to highly reduced, alkaline environments. A new serpentinite-hosted ecosystem, the Shinkai Seep Field (SSF), was discovered by a Shinkai 6500 dive in the inner trench slope of the southern Mariana Trench, near the Challenger Deep, during YK10-12 cruise of R/V Yokosuka in September 2010. Abundant chemosynthetic biological communities, principally consisting of vesicomyid clams are associated with serpentinized peridotite in the SSF. Serpentinization beneath several hydrothermal sites on the Mid-Atlantic Ridge is controlled by interacting seawater and peridotite, variably influenced by magmatic heat. In contrast, the SSF is located in a deep inner trench slope where magmatic heat contribution is unlikely. Instead, serpentinization reactions feeding the SSF may be controlled by persistent fluid flow from the subducting slab. Slab-derived fluid flow is probably controlled by flow through fractures because no serpentinite mud volcano can be discerned along the southern Mariana forearc. Deep-towed IMI-30 sonar backscatter imaging during TN273 cruise of R/V Thomas G. Thompson in January 2012 indicates that the SSF is associated with a small, low backscatter feature that may be a small mound. There are 20 or more of these features in the imaged area, the size of which is ~200 m width and ~200 m to ~700 m long. Since the southern Mariana forearc is heavily faulted, with a deep geology that is dominated by peridotite, more SSF-type seeps are likely to exist along the forearc above the Challenger Deep. The discovery of the SSF suggests that serpentinite-hosted vents may be more widespread on the ocean floor than presently known. The discovery further indicates that such serpentinite-hosted low-temperature fluid vents can sustain high-biomass communities and has implications for the chemical budget of the oceans and the distribution of abyssal chemosynthetic life. Since we know nothing about the chemistry and microbiology of the SSF, we hope to return for further studies with Shinkai 6500 in 2013.

Shear Wave Structure of Mount St. Helens, WA Region From Ambient Noise, Earthquake Surface Waves and Receiver Functions

NASA Astrophysics Data System (ADS)

Crosbie, K.; Abers, G. A.; Mann, M. E.; Janiszewski, H. A.; Creager, K. C.; Kiser, E.; Ulberg, C. W.; Denlinger, R. P.; Moran, S. C.

2017-12-01

Mount St. Helens (MSH) lies 50 km trenchward of the main arc front in Cascadia. The imaging Magma Under St. Helens (iMUSH) experiment probes its magmatic plumbing system in the mid to lower crust to understand how magmas could be generated in this setting. A 70-element broadband array was deployed for 2 years with a 10 km station spacing and 100 km aperture. Ambient noise and earthquake surface waves provide fundamental-mode Rayleigh wave phase velocity maps of the region from 0.01 to 0.18 Hz. From these, shear velocity (Vs) is estimated from 0 to 80 km depth. Initial attempts at integrating ambient-noise and earthquake datasets have been complicated by the lower resolution of earthquake-derived phase velocities compared to ambient noise, and care is being taken to minimize this incompatibility. Joint inversions with receiver functions help resolve these ambiguities and velocity contrasts across interfaces. For depths of 0-5 km, fast Vs zones (3.3 km/s) are imaged that correspond well with mapped plutons (Spud Mountain and Spirit Lake). Crust at 10-30 km depth has higher Vs (>3.9 km/s) west of MSH than east and north of it (Vs < 3.7 km/s). Crustal temperature variations from a cold forearc to a hot volcanic crust could partly explain this crustal velocity pattern. However, the exceedingly high Vs west of MSH requires a strong change in crustal composition, most likely revealing the east edge of the mafic Siletzia terrane with a predicted Vs similar to that observed. Just below the Moho, Vs variations are much smaller. The resulting Vs contrast across the Moho from surface waves and receiver functions is weak in the forearc and strong beneath the arc volcanoes. This pattern was previously interpreted as due to a serpentinized cold nose of the mantle. However, the anomalously high crustal velocities we observe west of MSH contribute to this forearc Moho absence more than mantle velocity variations, indicating that crustal geology enhances or dominates an effect attributed to mantle hydration. These results confirm that MSH lies on the edge of a notably cold forearc, exactly where crustal composition varies markedly. This sharp crustal terrane boundary immediately west of MSH may help localize volcanism.

Variations in fluid transport and seismogenic properties in the Lesser Antilles subduction zone: constraints from joint active-source and local earthquake tomography

NASA Astrophysics Data System (ADS)

Paulatto, M.; Laigle, M.; Charvis, P.; Galve, A.

2015-12-01

The degree of coupling and the seismogenic properties of the plate interface at subduction zones are affected by the abundance of slab fluids and subducted sediments. High fluid input can cause high pore-fluid pressures in the subduction channel and decrease coupling leading to aseismic behaviour. Constraining fluid input and transfer is therefore important for understanding plate coupling and large earthquake hazard, particularly in places where geodetic and seismological constraints are scarce. We use P-wave traveltimes from several active source seismic experiments and P- and S-wave traveltimes from shallow and intermediate depth (< 150 km) local earthquakes recorded on a vast amphibious array of OBSs and land stations to recover the Vp and Vp/Vs structure of the central Lesser Antilles subduction zone. Our model extends between Martinique and Antigua from the prism to the arc and from the surface to a depth of 160 km. We find low Vp and high Vp/Vs ratio (> 1.80) on the top of the slab, at depths of up to 100 km. We interpret this high Vp/Vs ratio anomaly as evidence of elevated fluid content either as free fluids or as bound fluids in hydrated minerals (e.g. serpentinite). The strength and depth extent of the anomaly varies strongly from south to north along the subduction zone and correlates with variations in forearc morphology and with sediment input constrained by multi-channel seismic reflection profiles. The anomaly is stronger and extends to greater depth in the south, offshore Martinique, where sediment input is elevated due to the vicinity of the Orinoco delta. The gently dipping forearc slope observed in this region may be the result of weak coupling of the plate interface. A high Vp/Vs ratio is also observed in the forearc likely indicating a fractured and water-saturated overriding plate. On the other hand the anomaly is weaker and shallower offshore Guadeloupe, where sediment input is low due to subduction of the Barracuda ridge. Here a strong plate coupling is likely responsible for uplifting the inner forearc and formation of the Karukera spur. We infer that variations in plate coupling modulated by slab fluid transport and release are a major factor in determining the distribution of seismic slip in the Lesser Antilles subduction zone.

Comprehensive Understanding of the Shinkai Seep Field in the Southern Mariana Forearc Based On High-Resolution Bathymetry Data

NASA Astrophysics Data System (ADS)

Ohara, Y.; Okumura, T.; Stern, R. J.; Fujii, M.; Kasaya, T.; Martinez, F.; Michibayashi, K.

2016-12-01

The Shinkai Seep Field (SSF) is a serpentinite-hosted cold seep and associated ecosystem in the southern Mariana forearc near the Challenger Deep [Ohara et al., PNAS, 2012] discovered as a massive vesicomyid clam colony site by a DSV Shinkai 6500 dive in September 2010. Serpentinite-hosted alkaline seep system is believed to be important for considering the habitats of the earliest life on Earth as well as extraterrestrial life such as on Saturn's moon Enceladus. SSF is the fourth known major location of such a serpentinite-hosted alkaline seep system, following the Lost City Field in the Mid-Atlantic Ridge, South Chamorro Seamount in the Mariana Forearc, and the Prony Bay Field in New Caledonia. Following SSF discovery, three JAMSTEC expeditions with DSV Shinaki 6500 and a single NSF-funded US expedition with a deep-towed side-scan sonar IMI-30 investigated the SSF. These follow-up expeditions further discovered brucite and carbonate chimney sites and another vesicomyid clam colony sites [Okumura et al., submitted], locating the geographical positions for these sites. We now estimate that the areal extent of the SSF is approximately 500 m by 300 m. However, this estimation is based on the shipboard multibeam bathymetry of R/V Yokosuka, which has the grid size of approximately 50 m. Therefore, our understanding of the spatial relationships of chimneys and colonies is not as well-constrained as it could be, hindering to discuss the subseafloor hydrological structure of the SSF. In order to advance our understanding of the SSF, we need to directly sample the fluid and understand the detailed spatial relationship between SSF chimneys. We will have an expedition using JAMSTEC's R/V Kairei and ROV Kaiko Mk-IV in early November (KR16-14 cruise) to obtain this information. Near-bottom high-resolution bathymetric data (submeter-scale) of the SSF and the forearc rift in the vicinity of the SSF will be obtained with a multibeam sonar SeaBat 7125 system to be installed on the ROV Kaiko Mk-IV, keeping the ROV's altitude of 80 m with the cruising speed of 2 knots. In this contribution, we will report expedition results, discussing implications for the subseafloor hydrological structure of the SSF and its vicinity.

Crustal accretion and exhumation of the Rio de la Plata Craton

NASA Astrophysics Data System (ADS)

Girelli, T. J.; Chemale, F., Jr.; Lavina, E.; Laux, J. H.; Bongiolo, E.; Lana, C.

2017-12-01

The Rio de la Plata is one key area for the reconstruction of the Paleoproterozoic Supercontinent in Western Gondwana. We present U-Pb-Hf isotopes, chemistry on minerals and whole-rock geochemistry from para and orthogneisses of the Santa Maria Chico Granulite Complex, one of the Rio de la Plata fragments partially affected by the Brasiliano Orogeny. U-Pb and Lu-Hf isotopes allowed the characterization of two main events: an oceanic juvenile crustal accretion (i) 2430 - 2290 Ma (ɛHf(t) -3.17 to +7.00); a continental arc (ii) 2240 - 2120 Ma (ɛHf(t)= -4 to +2.4). We recognized two main high-grade metamorphic events in the region linked to an arc volcanic setting (830 - 870 °C - 6.7 - 7.2 kbar, 2.3 Ga) and later to continent-continent collision (770 - 790 °C and 8.7 - 9.1 kbar, 2.1 - 2.0 Ga). The development of orogenic sedimentary basins (fore-arc and intra-arc) occurred during the last cycle with the maximum depositional age of 2.12 Ga and were metamorphosed during 2.06 Ga main granulitic event. The granulitic rocks were cut by 1.8 Ga alkaline granitic dikes related to crustal extension recognized in the different segments of the craton and widespread in the adjacent paleoplates at the time. The present data point to that Paleoproterozoic granulitic rocks of the Santa Maria Chico Granulite Complex and adjacent Nico Pérez and Rivera terranes, formed in a multi-stage volcanic arc to continental collision environment along 370 Ma (2430 to 2060 Ma). These terranes were amalgamated during the Paleoproterozoic to the core of the Rio de la Plata Craton as part of Columbia Supercontinent and later partially reworked during the amalgamation of Western Gondwana in the Neoproterozoic.

Towards Understanding the Sunda and Banda Arcs

NASA Astrophysics Data System (ADS)

Hall, R.

2014-12-01

The present change from oceanic subduction beneath the Sunda Arc to arc-continent collision east of Sumba is merely the latest stage in a complex collision history that began more than 20 million years ago. Understanding present-day tectonics requires restoring the pre-collisional margins and unravelling the history of the entire Sunda-Banda Arc, not just a segment centred on Sumba. Seismic tomography displays a single folded slab beneath the Banda Arc around which mantle has flowed. Above this is a wide actively deforming zone of complex geology. Australian crust was first added to the Sunda margin in the Cretaceous. Early Miocene closure of the oceanic gap north of Australia led to further additions of continental crust during collision of the Sula Spur. Few microcontinental fragments were sliced from New Guinea as commonly interpreted. Most are parts of the Sula Spur fragmented by extension and strike-slip faulting during development of subduction zones and rollback into the Banda embayment. Many metamorphic 'basement' rocks are significantly younger than expected. They were metamorphosed during multiple episodes of extension which also exhumed the sub-lithospheric mantle, melted the deep continental crust, created new ocean basins, and dispersed continental crust throughout the inner and outer arc, and forearc, so that in places Australian crust is colliding with Australian crust. Thus, many of the arc volcanoes are built on continental not oceanic crust, and sediment eroded from recently emergent islands is compositionally different to subducted sediment that contributed to arc magmas. The published literature is inadequate. New fieldwork and data are required, particularly in remote areas, with integration of information from a variety of sources (e.g. industry seismic and multibeam bathymetry, remotely acquired imagery) and sub-disciplines (e.g. geochronology, geochemistry, seismology, modelling). No single methodology can provide a complete solution.

3D geometry of a plate boundary fault related to the 2016 Off-Mie earthquake in the Nankai subduction zone, Japan

NASA Astrophysics Data System (ADS)

Tsuji, Takeshi; Minato, Shohei; Kamei, Rie; Tsuru, Tetsuro; Kimura, Gaku

2017-11-01

We used recent seismic data and advanced techniques to investigate 3D fault geometry over the transition from the partially coupled to the fully coupled plate interface inboard of the Nankai Trough off the Kii Peninsula, Japan. We found that a gently dipping plate boundary décollement with a thick underthrust layer extends beneath the entire Kumano forearc basin. The 1 April 2016 Off-Mie earthquake (Mw6.0) and its aftershocks occurred, where the plate boundary décollement steps down close to the oceanic crust surface. This location also lies beneath the trenchward edge of an older accretionary prism (∼14 Ma) developed along the coast of the Kii peninsula. The strike of the 2016 rupture plane was similar to that of a formerly active splay fault system in the accretionary prism. Thus, the fault planes of the 2016 earthquake and its aftershocks were influenced by the geometry of the plate interface as well as splay faulting. The 2016 earthquake occurred within the rupture area of large interplate earthquakes such as the 1944 Tonankai earthquake (Mw8.1), although the 2016 rupture area was much smaller than that of the 1944 event. Whereas the hypocenter of the 2016 earthquake was around the underplating sequence beneath the younger accretionary prism (∼6 Ma), the 1944 great earthquake hypocenter was close to oceanic crust surface beneath the older accretionary prism. The variation of fault geometry and lithology may influence the degree of coupling along the plate interface, and such coupling variation could hinder slip propagation toward the deeper plate interface in the 2016 event.

Meso- and microscale vein structures in fore-arc basalts and boninites related to post-magmatic tectonic deformation in the outer Izu-Bonin-Mariana fore arc system: preliminary results from IODP Expedition 352

NASA Astrophysics Data System (ADS)

Quandt, Dennis; Micheuz, Peter; Kurz, Walter

2016-04-01

The International Ocean Discovery Program (IODP) Expedition 352 aimed to drill through the entire volcanic sequence of the Izu-Bonin-Mariana fore arc. Two drill sites are situated on the outer fore arc composed of fore arc basalts (FAB) whereas two more sites are located on the upper trench slope penetrating the younger boninites. First results from IODP Expedition 352 and preliminary post-cruise data suggest that FAB were generated by decompression melting during near-trench sea-floor spreading, and that fluids from the subducting slab were not involved in their genesis. Subduction zone fluids involved in boninite genesis appear to have been derived from progressively higher temperatures and pressures over time as the subducting slab thermally matured. Structures within the drill cores combined with borehole and site survey seismic data indicate that tectonic deformation in the outer Izu-Bonin-Mariana fore arc is mainly post-magmatic associated with the development of syn-tectonic sedimentary basins. Within the magmatic basement deformation was accommodated by shear along cataclastic fault zones and the formation of tension fractures, shear fractures and hybrid (tension and shear) fractures. Veins form by mineral filling of tension or hybrid fractures and show no or limited observable macroscale displacement along the fracture plane. (Low Mg-) Calcite and/or various types of zeolite are the major vein constituents, where the latter are considered to be alteration products of basaltic glass. Micrite contents vary significantly and are related to neptunian dikes. In boninites calcite develops mainly blocky shapes but veins with fibrous and stretched crystals also occur in places indicating antitaxial as well as ataxial growth, respectively. In FAB calcite forms consistently blocky crystals without any microscopic identifiable growth direction suggesting precipitation from a highly supersaturated fluid under dropping fluid pressure conditions. However, fluid pressure must have been high before calcite precipitation in order to fracture the host rock and to place host rock fragments within the vein. Cross-cutting relationships of veins and zonation consisting of blocky calcite and micritic calcite indicate multiple and probably chaotic fracturing and repeated mineral precipitation or emplacement of micrite, respectively. Hydrothermal fluids affected significantly the vein walls by forming selvages of asbestiform mineral bands and alteration halos along the vein-wall rock contact. Rock fragments show the same selvages as the vein walls. Moreover, volcanic glass can be completely altered to zeolite and/or palagonite. This hydrothermal activity took place shortly after magma cooling since vein frequency varies with depth but does not seem to correlate with the proximity to faults. With increasing depth, calcite grains in both sequences exhibit deformation microstructures more frequently than at shallower core intervals. These microstructures include thin twinning (type I twins), increasing in width with depth (type I and type II twins), slightly curved twins, and subgrain boundaries indicative of incipient plastic deformation. The differential stresses (≥ 50 MPa) that triggered vein deformation were presumably related to IBM forearc extension due to the retreating Pacific lower plate.

Imaging hydration and dehydration across the Cascadia subduction zone (Invited)

NASA Astrophysics Data System (ADS)

Abers, G. A.; Van Keken, P. E.; Hacker, B. R.; Mann, M. E.; Crosbie, K.; Creager, K.

2017-12-01

Arc volcanoes and exhumed forearc metamorphic rocks show clear evidence for upward transport of slab-derived fluids, but geophysical measurements rarely image features that could constrain the mode of this fluid transport. The hottest subduction zones such as Cascadia pose a particular challenge, as the depths where hydrous minerals are stable seaward of trenches is limited, and much of the water is expected to depart the slab before reaching sub-arc depths. Here we improve our understanding of this problem by developing a new thermal model for central Cascadia, leveraging new results several onshore and offshore geophysical investigations, notably the iMUSH project (Imaging Magma Under mount St. Helens), to evaluate constraints on the fluid flux. Offshore onshore heat flow measurements require a cold forearc and preclude detectable shear heating. Several puzzles emerge. The first is that Mount St. Helens overlies a continuous subducting plate which has an upper surface only 65-70 km deep beneath the volcano, imaged by migrated scattered P coda. This location, together with heat flow observations and inferences from the strength of the upper plate Moho, place the volcano over a cold forearc mantle wedge that is substantially hydrated. It is unclear how the wide range of magmas at Mount St. Helens could emerge in this setting since many have mantle origin. A second puzzle is that a large velocity step, about 10% in Vs, is seen along the slab Moho to depths exceeding 90 km where thermal models predict the subducting crust is in eclogite facies; eclogite and peridotite should have nearly indistinguishable Vs. Possibly a gabbroic oceanic crust persists metastably well below the arc, or perhaps the interface represents a deeper hydration front rather than petrologic Moho. A third puzzle is the persistent indication of H2O in arc magmas here despite almost certain dehydration of subducting sediments and upper oceanic crust. This indicates substantial H2O delivered by hydrated mantle lithosphere despite seismic evidence offshore for very little hydration. Perhaps the subducting lower crust carries more H2O than previously thought, or H2O transports structurally downward into the slab after subduction commences. Overall, substantial evidence exists for lateral transport of hydrous fluids in their path from slab to surface.

Subduction erosion off central Java: transition from accretion to erosion manifested by wide-angle seismic studies

NASA Astrophysics Data System (ADS)

Wittwer, A.; Flueh, E.; Rabbel, W.; Wagner, D.

2006-12-01

In this study, offshore wide-angle data acquired by ocean bottom instruments of a combined onshore- offshore investigation of the tectonic framework of central Java will be presented. The joint interdisciplinary project MERAMEX (Merapi Amphibious Experiment) was carried out in order to characterize the subduction of the Indo-Australian plate beneath Eurasia. The interpretation of three wide-angle data profiles, modelled with forward raytracing, indicates that the subduction of the Roo Rise with its thickened oceanic crust strongly influences the subduction zone. The dip angle of the downgoing oceanic plate is 10° and its crustal thickness increases to the east from 8 km to 9 km between both dip profiles off central Java. Large scale forearc uplift is manifested in isolated forearc highs, reaching water depths of only 1000 m compared to 2000 m water depth off western Java, and results from oceanic basement relief subduction. A broad band of seamounts trends E-W at approximately 10°S. Its incipient subduction off central Java causes frontal erosion of the margin here and leads to mass wasting due to oversteepening of the upper trench wall. A suite of wide-angle profiles off southern Sumatra to central Java indicates a clear change in the tectonic environment between longitude 108°E and 109°E. The well-developed accretionary wedge off southern Sumatra and western Java changes into a small frontal prism with steep slope angles of the upper plate off central Java.

A revised dislocation model of interseismic deformation of the Cascadia subduction zone

USGS Publications Warehouse

Wang, Kelin; Wells, Ray E.; Mazzotti, Stephane; Hyndman, Roy D.; Sagiya, Takeshi

2003-01-01

CAS3D‐2, a new three‐dimensional (3‐D) dislocation model, is developed to model interseismic deformation rates at the Cascadia subduction zone. The model is considered a snapshot description of the deformation field that changes with time. The effect of northward secular motion of the central and southern Cascadia forearc sliver is subtracted to obtain the effective convergence between the subducting plate and the forearc. Horizontal deformation data, including strain rates and surface velocities from Global Positioning System (GPS) measurements, provide primary geodetic constraints, but uplift rate data from tide gauges and leveling also provide important validations for the model. A locked zone, based on the results of previous thermal models constrained by heat flow observations, is located entirely offshore beneath the continental slope. Similar to previous dislocation models, an effective zone of downdip transition from locking to full slip is used, but the slip deficit rate is assumed to decrease exponentially with downdip distance. The exponential function resolves the problem of overpredicting coastal GPS velocities and underpredicting inland velocities by previous models that used a linear downdip transition. A wide effective transition zone (ETZ) partially accounts for stress relaxation in the mantle wedge that cannot be simulated by the elastic model. The pattern of coseismic deformation is expected to be different from that of interseismic deformation at present, 300 years after the last great subduction earthquake. The downdip transition from full rupture to no slip should take place over a much narrower zone.

Palaeointensity determinations and rock magnetic properties on rocks from Izu-Bonin-Mariana fore-arc (IODP Exp. 352).

NASA Astrophysics Data System (ADS)

Carvallo, Claire; Camps, Pierre; Sager, Will; Poidras, Thierry

2017-04-01

IODP Expedition 352 cored igneous rocks from the Izu-Bonin-Mariana fore-arc crust: Sites U1440 and U1441 recovered Eocene basalts and related rocks whereas Sites U1439 and U1442 recovered Eocene boninites and related rocks. We selected samples from Holes U1439C, U1440B and U1440A for paleointensity measurements. Hysteresis measurements and high and low-temperature magnetization curves show that samples from Hole U1440B undergo magnetochemical changes when heated and are mostly composed of single-domain (SD) or pseudo-single-domain (PSD) titanomaghemite. In contrast, the same measurements show that most selected samples from Holes U1439C and U1442A are thermally stable and are composed of either SD or PSD titanomagnetite with very little titanium content, or SD ferromagnetic grains with a large paramagnetic contribution. Thellier-Thellier paleointensity experiments carried out on U1439C and U1442A samples give a good success rate of 25/60 and Virtual Dipole Moment values between 1.3 and 3.5 ×1022 Am2. Multispecimen paleointensity experiments carried out on 55 samples from Hole U1440B (divided into 4 groups) and 20 from Hole U1439C gave poor quality result, but they seem to indicate a VDM around 4-6 ×1022 Am2 in Hole U1440B fore-arc basalts. These results are in agreement with the low few VDM values previously measured on rocks from Eocene. However, they do not support an inverse relationship between intensity of the field and rate of reversal, since the rate of reversal in Eocene was rather low.

Palaeointensity determinations and magnetic properties on Eocene rocks from Izu-Bonin-Mariana forearc (IODP Exp. 352)

NASA Astrophysics Data System (ADS)

Carvallo, C.; Camps, P.; Sager, W. W.; Poidras, T.

2017-09-01

IODP Expedition 352 cored igneous rocks from the Izu-Bonin-Mariana forearc crust. Cores from Sites U1440 and U1441 recovered Eocene basalts and related rocks and cores from Sites U1439 and U1442 recovered Eocene boninites and related rocks. We selected samples from Holes U1439C, U1440B and U1442A for palaeointensity measurements. Hysteresis measurements and high and low-temperature magnetization curves show that samples from Hole U1440B undergo magneto-chemical changes when heated and are mostly composed of single-domain (SD) or pseudo-single-domain (PSD) titanomaghemite. In contrast, the same measurements show that most selected samples from Holes U1439C and U1442A are thermally stable and are composed of either SD or PSD titanomagnetite with very little titanium content, or SD ferromagnetic grains with a large paramagnetic contribution. Thellier-Thellier palaeointensity experiments carried out on U1439C and U1442A samples give a good success rate of 25/60 and Virtual Dipole Moment (VDM) values between 1.3 and 3.5 × 1022 Am2. Multispecimen palaeointensity experiments with the domain-state corrected method carried out on 55 samples from Hole U1440B (divided into four groups) and 20 from Hole U1439C gave poor quality results, but indicated a VDM around 4-6 × 1022 Am2 in Hole U1440B forearc basalts. These results are in agreement with the few, low VDM values previously measured on Eocene rocks. However, they do not support an inverse relationship between field intensity and reversal rate for this period of time, since the Eocene reversal rate was low.

Three-Dimensional Electrical Resistivity Image of the Volcanic Arc in Northern Chile—An Appraisal of Early Magnetotelluric Data

NASA Astrophysics Data System (ADS)

Kühn, Christine; Brasse, Heinrich; Schwarz, Gerhard

2017-12-01

Magnetotelluric investigations were carried out in the late 1980s across all morphological units of the South American subduction zone with the aim to observe lithosphere structures and subduction-induced processes in northern Chile, southwestern Bolivia, and northwestern Argentina at 22°S. Earlier two-dimensional forward modeling yielded a complex picture of the lower crust and upper mantle, with strong variations between the individual morphological units as well as between forearc and backarc. The principal result was a highly conductive zone beneath the volcanic arc of the Western Cordillera starting at 25 km depth. Goal of this work is to extend the existing 2-D results using three-dimensional modeling techniques at least for the volcanic arc and forearc region between 22°S and 23°S in Northern Chile. Dimensionality analysis indicates strong 3-D effects along the volcanic arc at the transition zone to the Altiplano, in the Preandean Depression and around the Precordillera Fault System at 22°S. In general, the new 3-D models corroborate previous findings, but also enable a clearer image of lateral resistivity variations. The magmatic arc conductor emerges now as a trench-parallel, N-S elongated structure slightly shifted to the east of the volcanic front. The forearc appears highly resistive except of some conductive structures associated with younger sedimentary infill or young magmatic record beneath the Precordillera and Preandean Depression. The most prominent conductor in the whole Central Andes beneath the Altiplano and Puna is also modeled here; it is, however, outside the station array and thus poorly resolved in this study.

Timing of fluid seepage on summits of Quaker and Conical serpentine mud volcanoes, Mariana forearc: Evidence from U/Th dating of carbonate chimneys

NASA Astrophysics Data System (ADS)

Tong, Hongpeng; Fryer, Patricia; Feng, Dong; Chen, Duofu

2017-04-01

Serpetinization of forearc mantle along deep faults in the Mariana convergent plate margin permits formation of large active serpentinite mud volcanoes on the overiding plate within 90 km of the trench. Fluid seepage on summits of the mud volcanoes lead to the formation of authigenic carbonate chimneys close to the seafloor. Such carbonate chimneys are unique archives of past fluid seepage and assciated envrionemtnal parameters. Here, we report U/Th dating and stable carbon and oxygen isotopes of the chimneys from Quaker and Conical serpentine mud volcanoes. The resulting U/Th ages of samples from Quaker Seamount show three time intervals of 11,081 to10,542 yBP, 5,857 to 5,583 yBP, and 781 to 164 yBP, respectively. By comparison, carbonates from Conical Seamount have U/Th ages between 3,070 yBP and 1,623 yBP. Our results suggest that fluid seepage on the summits of serpentine mud volcanoes are episodic and probably locally controlled. Samples from Quaker seamount show depletion of 13C (δ13C=-7.0-0.4‰ V-PDB), indicating contribution of carbon from anoxic oxidation of abiogenic methane. By contrast, samples from Conical seamount have positive δ18O values (0.6-6.3), suggesting enrichment of 18O in the seepage fluid. The data obtained provide time integrated variation of seepage fluids and seepage dynamics that are archived in authigenic carbonates. This finding adds to the ongoing multidisciplinary effort to better constrain the environment in the Mariana forearc region and to determine the locally dominant biogeochemical processes. Acknowlegment: This study was funded by the CAS (Grant No. XDB06030102).

Testing short-range migration of microbial methane as a hydrate formation mechanism: Results from Andaman Sea and Kumano Basin drill sites and global implications

NASA Astrophysics Data System (ADS)

Malinverno, Alberto; Goldberg, David S.

2015-07-01

Methane gas hydrates in marine sediments often concentrate in coarse-grained layers surrounded by fine-grained marine muds that are hydrate-free. Methane in these hydrate deposits is typically microbial, and must have migrated from its source as the coarse-grained sediments contain little or no organic matter. In "long-range" migration, fluid flow through permeable layers transports methane from deeper sources into the gas hydrate stability zone (GHSZ). In "short-range" migration, microbial methane is generated within the GHSZ in fine-grained sediments, where small pore sizes inhibit hydrate formation. Dissolved methane can then diffuse into adjacent sand layers, where pore size does not restrict hydrate formation and hydrates can accumulate. Short-range migration has been used to explain hydrate accumulations in sand layers observed in drill sites on the northern Cascadia margin and in the Gulf of Mexico. Here we test the feasibility of short-range migration in two additional locations, where gas hydrates have been found in coarse-grained volcanic ash layers (Site NGHP-01-17, Andaman Sea, Indian Ocean) and turbidite sand beds (Site IODP-C0002, Kumano forearc basin, Nankai Trough, western Pacific). We apply reaction-transport modeling to calculate dissolved methane concentration and gas hydrate amounts resulting from microbial methane generated within the GHSZ. Model results show that short-range migration of microbial methane can explain the overall amounts of methane hydrate observed at the two sites. Short-range migration has been shown to be feasible in diverse margin environments and is likely to be a widespread methane transport mechanism in gas hydrate systems. It only requires a small amount of organic carbon and sediment sequences consisting of thin coarse-grained layers that can concentrate microbial methane generated within thick fine-grained sediment beds; these conditions are common along continental margins around the globe.

Evidence of orbital forcing in lake-level fluctuations in the Middle Eocene oil shale-bearing lacustrine successions in the Mudurnu-Göynük Basin, NW Anatolia (Turkey)

NASA Astrophysics Data System (ADS)

Ocakoğlu, F.; Açıkalın, S.; Yılmaz, İ. Ö.; Şafak, Ü.; Gökçeoğlu, C.

2012-08-01

Mudurnu-Göynük basin of the Sakarya Zone in NW Anatolia comprises ca. 1500 m thick Paleocene-Eocene terrestrial to shallow marine succession overlying the Late Cretaceous deeper marine progradational fore-arc sediments. Formed in a foreland setting in relation to southerly situated İzmir-Ankara suture zone, this terrestrial succession (regionally known as Kızılçay group) comprises a thin (<200 m) oil shale-bearing lacustrine section with very good cyclic patterns that potentially serves the quantification of stratigraphy and enlightening the origin of cyclicities of various hierarchy. Our detailed facies analysis on three correlative measured sections showed that mudstone, oil shale and thinner limestone alternations characterize the relatively deeper part of the Eocene lake with probable marine intervention, while thicker limestone, coal, marl and occasional oil shale alternations typify the southern relatively freshwater shoal areas. These facies are frequently organized as meter-scale symmetric to asymmetric transgressive-regressive cycles. Spectral analysis of the mudstone beds and the cycles within the lacustrine succession strongly indicates the occurrence of full bands of Milankovitch with the shortest precession cycle (19 ka) at ca. 2.30 m. Our observations further revealed quite rhythmic thin couplets with estimated durations of 365-730 yr that might represent abrupt climatic changes during deposition. On the other hand, longer duration (ca. 1 Ma) of shoaling and deepening trends in the studied sections were attributed basically to varying subsidence due to tectonic loading in the southerly suture zone. Lastly, regarding the distribution of depositional environments we propose that the oil shale exploration activities should be carried out within a 20 km wide E-W running belt while the southern limits of this belt is more prolific for coal resources.

Impact of the slab dip change onto the deformation partitioning in the northern Lesser Antilles oblique subduction zone (Antigua-Virgin Islands)

NASA Astrophysics Data System (ADS)

Laurencin, Muriel; Marcaillou, Boris; Klingelhoefer, Frauke; Graindorge, David; Lebrun, Jean-Frédéric; Laigle, Mireille; Lallemand, Serge

2017-04-01

Marine geophysical cruises Antithesis (2013-2016) investigate the impact of the variations in interplate geometry onto margin tectonic deformation along the strongly oblique Lesser Antilles subduction zone. A striking features of this margin is the drastic increase in earthquake number from the quiet Barbuda-St Martin segment to the Virgin Islands platform. Wide-angle seismic data highlight a northward shallowing of the downgoing plate: in a 150 km distance from the deformation front, the slab dipping angle in the convergence direction decreases from 12° offshore of Antigua Island to 7° offshore of Virgin Islands. North-South wide-angle seismic line substantiates a drastic slab-dip change that likely causes this northward shallowing. This dip change is located beneath the southern tip of the Virgin Islands platform where the Anegada Passage entails the upper plate. Based on deep seismic lines and bathymetric data, the Anegada Passage is a 450 km long W-E trending set of pull-apart basins and strike-slip faults that extends from the Lesser Antilles accretionary prism to Puerto Rico. The newly observed sedimentary architecture within pull-apart Sombrero and Malliwana basins indicates a polyphased tectonic history. A past prominent NW-SE extensive to transtensive phase, possibly related to the Bahamas Bank collision, opened the Anegada Passage as previously published. Transpressive tectonic evidences indicate that these structures have been recently reactivated in an en-echelon sinistral strike-slip system. The interpreted strain ellipsoid is consistent with deformation partitioning. We propose that the slab northward shallowing increases the interplate coupling and the seismic activity beneath the Virgin Islands platform comparatively to the quiet Barbuda-St Martin segment. It is noteworthy that the major tectonic partitioning structure in the Lesser Antilles forearc is located above the slab dip change where the interplate seismic coupling increases.

Origins of saline fluids at convergent margins

NASA Astrophysics Data System (ADS)

Martin, Jonathan B.; Kastner, Miriam; Egeberg, Per Kr.

The compositions of pore and venting fluids at convergent margins differ from seawater values, reflecting mixing and diagenesis. Most significantly, the concentration of Cl-, assumed to be a conservative ion, differs from its seawater value. Chloride concentrations could be elevated by four processes, although two, the formation of gas hydrate and ion filtration by clay membranes, are insignificant in forming saline fluids at convergent margins. During the formation of gas hydrate, the resulting Cl--rich fluids, estimated to contain an average excess of ˜140 mM Cl- over seawater value, probably would be flushed from the sediment when the pore fluids vent to seawater. Ion filtration by clay membranes requires compaction pressures typical of >2 km burial depths. Even at these depths, the efficiency of ion filtration will be negligible because (1) fluids will flow through fractures, thereby bypassing clay membranes, (2) concentrations of clay minerals are diluted by other phases, and (3) during burial, smectite converts to illite, which has little capacity for ion filtration. A third process, mixing with subaerially evaporated seawater, elevates Cl- concentrations to 1043 mM in forearc basins along the Peru margin. Evaporation of seawater, however, will be important only in limited geographic regions that are characterized by enclosed basins, arid climates, and permeable sediments. At the New Hebrides and Izu-Bonin margins, Cl- concentrations are elevated to a maximum of 1241 mM. The process responsible for this increase is the alteration of volcanic ash to hydrous clay and zeolite minerals. Mass balance calculations, based on the decrease in δ18O values to -9.5‰ (SMOW), suggest that the Cl- concentrations could increase solely from the formation of smectite in a closed system. The diagenesis of volcanic ash also alters the concentrations of most dissolved species in addition to Cl-. Depending on the volume of this altered fluid, it could influence seawater chemistry when vented from the sediment.

Seismic evidence for a cold serpentinized mantle wedge beneath Mount St Helens

PubMed Central

Hansen, S. M.; Schmandt, B.; Levander, A.; Kiser, E.; Vidale, J. E.; Abers, G. A.; Creager, K. C.

2016-01-01

Mount St Helens is the most active volcano within the Cascade arc; however, its location is unusual because it lies 50 km west of the main axis of arc volcanism. Subduction zone thermal models indicate that the down-going slab is decoupled from the overriding mantle wedge beneath the forearc, resulting in a cold mantle wedge that is unlikely to generate melt. Consequently, the forearc location of Mount St Helens raises questions regarding the extent of the cold mantle wedge and the source region of melts that are responsible for volcanism. Here using, high-resolution active-source seismic data, we show that Mount St Helens sits atop a sharp lateral boundary in Moho reflectivity. Weak-to-absent PmP reflections to the west are attributed to serpentinite in the mantle-wedge, which requires a cold hydrated mantle wedge beneath Mount St Helens (<∼700 °C). These results suggest that the melt source region lies east towards Mount Adams. PMID:27802263

Noble gas isotopes in mineral springs and wells within the Cascadia forearc, Washington, Oregon, and California

USGS Publications Warehouse

McCrory, Patricia A.; Constantz, James E.; Hunt, Andrew G.

2017-01-31

IntroductionThis U.S. Geological Survey report presents laboratory analyses along with field notes for an exploratory study to document the relative abundance of noble gases in mineral springs and water wells within the Cascadia forearc of Washington, Oregon, and California (fig. 1). This report describes 14 samples collected in 2014 and 2015 and complements a previous report that describes 9 samples collected in 2012 and 2013 (McCrory and others, 2014b). Estimates of the depth to the underlying Juan de Fuca oceanic plate beneath sample sites are derived from the McCrory and others (2012) slab model. Some of the springs have been previously sampled for chemical analyses (Mariner and others, 2006), but none of the springs or wells currently has publicly available noble gas data. The helium and neon isotope values and ratios presented below are used to determine the sources and mixing history of these mineral and well waters (for example, McCrory and others, 2016).

A new estimate for present-day Cocos-Caribbean Plate motion: Implications for slip along the Central American Volcanic Arc

NASA Astrophysics Data System (ADS)

DeMets, Charles

Velocities from 153 continuously-operating GPS sites on the Caribbean, North American, and Pacific plates are combined with 61 newly estimated Pacific-Cocos seafloor spreading rates and additional marine geophysical data to derive a new estimate of present-day Cocos-Caribbean plate motion. A comparison of the predicted Cocos-Caribbean direction to slip directions of numerous shallow-thrust subduction earthquakes from the Middle America trench between Costa Rica and Guatemala shows the slip directions to be deflected 10° clockwise from the plate convergence direction, supporting the hypothesis that frequent dextral strike-slip earthquakes along the Central American volcanic arc result from partitioning of oblique Cocos-Caribbean plate convergence. Linear velocity analysis for forearc locations in Nicaragua and Guatemala predicts 14±2 mm yr-1 of northwestward trench-parallel slip of the forearc relative to the Caribbean plate, possibly decreasing in magnitude in El Salvador and Guatemala, where extension east of the volcanic arc complicates the tectonic setting.

Depleted deep South China Sea δ13C paleoceanographic events in response to tectonic evolution in Taiwan-Luzon Strait since Middle Miocene

NASA Astrophysics Data System (ADS)

Chen, Wen-Huang; Huang, Chi-Yue; Lin, Yen-Jun; Zhao, Quanhong; Yan, Yi; Chen, Duofu; Zhang, Xinchang; Lan, Qing; Yu, Mengming

2015-12-01

The most distinctive feature of the deep South China Sea (SCS) paleoceanography is the occurrence of long-term depleted deep-sea benthic foraminiferal δ13C values. They are lower than the global and the Pacific composite records in the last 16 Ma, especially at 13.2, 10.5, 6.5, 3.0 and 1.2-0.4 Ma. This distinct deep SCS paleoceanograhic history coincides with the subduction-collision history in the Taiwan region where waters of the West Pacific (WP) and the SCS exchange. The depleted deep-sea benthic foraminiferal δ13C events indicate that the SCS deep basin became progressively a stagnant environment in the last 16 Ma due to either closure of the connection with the WP bottom water or temporary reduction of the WP deep water flowing into the deep SCS. Both the Taiwan accretionary prism and the Luzon arc became the main tectono-morphological barriers for the WP bottom water flowing into the SCS deep basin when eastward subduction of the SCS oceanic lithosphere beneath the Philippine Sea Plate started from the Middle Miocene (18-16 Ma). This began a long-term trend of depleted SCS deep-sea benthic δ13C values in the last 16 Ma. The oblique arc-continent collision since ~6.5 Ma uplifted the Taiwan accretionary prism rapidly above sea level and further isolated the SCS from the open Pacific. The collision simultaneously causes backthrusting deformations in the North Luzon Trough forearc basin and sequentially closes interarc water gates between volcanic islands from north to south. The Loho and the Taitung interarc water gates in the advanced collision zone were closed at ~3.0 Ma and ~1.2 Ma, coinciding with the very low SCS deep-sea benthic δ13C events at 3.0 and 1.2-0.4 Ma, respectively. The Taitung Canyon between the Lutao and Lanyu volcanic islands in the incipient collision zone is semi-closed presently. These closure events also lead to the result that the WP deep water intrudes westward into the SCS principally through the Bashi Channel between the Lanyu and Batan volcanic islands in the subduction zone.

An Integrated Age Model for the Cocos Plate using IODP CRISP Drilling Data

NASA Astrophysics Data System (ADS)

Baxter, A. T.; Kutterolf, S.; Schindlbeck, J. C.; Sandoval, M. I.; Barckhausen, U.; Li, Y. X.; Petronotis, K. E.

2017-12-01

We present an integrated age model for the incoming Cocos Plate sediments offshore Costa Rica. The data, collected over two IODP Expeditions (334 and 344), provides a medium- to high-resolution record from the initial formation of the ocean crust in the Miocene to the present day. This study provides >50 age control points for the CRISP sediments from Sites U1381 and U1414. Although the two sites are just 10 km apart, there are distinct differences in the sediment and tephra record. Most notable is the presence of a hiatus at Site U1381. The hiatus, which is seen at other sites on the Cocos Plate, but not at Site U1414, may be related to erosion due to bottom water currents, mass wasting from Cocos Ridge subduction or may be related to the closure of the Central American Seaway (CAS). Sediment accumulation rates in the Miocene are comparable to modern abyssal plain rates. However, an increase is observed in the Pleistocene, when detritus from the forearc basin appears at Site U1414 2 Ma, shortly after the initiation of Cocos Ridge subduction. A tectonic model is presented that reconstructs the Cocos Plate, from its formation at 23 Ma to the present day. Eastern Equatorial Pacific (EEP) paleoceanographic events, such as the Miocene `carbonate crash' and the Late Miocene-Early Pliocene `biogenic bloom' observed at Site U1414, are also discussed.

Variance and potential niche separation of microbial communities in subseafloor sediments off Shimokita Peninsula, Japan.

PubMed

Nunoura, Takuro; Takaki, Yoshihiro; Shimamura, Shigeru; Kakuta, Jungo; Kazama, Hiromi; Hirai, Miho; Masui, Noriaki; Tomaru, Hitoshi; Morono, Yuki; Imachi, Hiroyuki; Inagaki, Fumio; Takai, Ken

2016-06-01

Subseafloor pelagic sediments with high concentrations of organic matter form habitats for diverse microorganisms. Here, we determined depth profiles of genes for SSU rRNA, mcrA, dsrA and amoA from just beneath the seafloor to 363.3 m below the seafloor (mbsf) using core samples obtained from the forearc basin off the Shimokita Peninsula. The molecular profiles were combined with data on lithostratigraphy, depositional age, sedimentation rate and pore-water chemistry. The SSU rRNA gene tag structure and diversity changed at around the sulfate-methane transition zone (SMTZ), whereas the profiles varied further with depth below the SMTZ, probably in connection with the variation in pore-water chemistry. The depth profiles of diversity and abundance of dsrA, a key gene for sulfate reduction, suggested the possible niche separations of sulfate-reducing populations, even below the SMTZ. The diversity and abundance patterns of mcrA, a key gene for methanogenesis/anaerobic methanotrophy, suggested a stratified distribution and separation of anaerobic methanotrophy and hydrogenotrophic or methylotrophic methanogensis below the SMTZ. This study provides novel insights into the relationships between the composition and function of microbial communities and the chemical environment in the nutrient-rich continental margin subseafloor sediments, which may result in niche separation and variability in subseafloor microbial populations. © 2015 Society for Applied Microbiology and John Wiley & Sons Ltd.

Interplay of Structure and Sediment Supply May Influence Subduction Zone Rupture Patches and Propagation

NASA Astrophysics Data System (ADS)

Goldfinger, C.; Wang, K.; Witter, R.; Baptista, A.; Zhang, Y.; Priest, G.; Nelson, H.; Morey, A.; Johnson, J.

2007-12-01

The question of whether there are universal controls on the genesis and maintenance of large slip and moment patches along strike on subduction megathrusts has proved remarkably elusive, in part due to the short temporal records we have of these great events around the globe. Many events this century are poorly constrained, and many subduction zones only have one or a few events available for comparison. Long historical records and good structural constraints have made Nankai a leading case for basin centered asperities, yet the recent Sumatra Mw 9.2 rupture models show that slip and moment for the most part avoided basins and was centered under structural highs. In Cascadia, both deformation and tsunami models clearly fit the respective subsidence and runup data better if slip in past events was centered under or did not avoid these highs as opposed to basin centered model. Onshore and offshore paleoseismic evidence from 38 Cascadia earthquakes strongly suggest that structural segmentation plays a role only along the southernmost margin. These data do not provide information on moment or slip distribution, but do effectively constrain rupture lengths. Rupture lengths constrained by the paleoseismic data show that there is no Holocene segmentation for the northern margin, and that southern segments may be controlled by some of the obvious structural boundaries such as the Blanco Fracture zone, and outer arc uplifts and forearc basins. Where resolution is adequate, these data also suggest that ruptures die out into the basins and are linked multi-segment ruptures of structural uplifts, similar to that observed in the 2004 and 2005 earthquakes from Sumatra where outer arc uplifts may mark segment boundaries, high slip patches and initiation points for great earthquakes. The difference between the rupture modes observed for Nankai and Sumatra, and suggested here for Cascadia may be linked to the sediment supply for these systems. Cascadia and Sumatra are both systems where massive submarine fans are accreting to the margin in their northern regions, with incoming sections of 3-4 km thickness that taper southward. These thick sections promote high fluid pressure, but also tend to smooth the plate interface with respect to structures in both the downgoing and upper plates. A smooth plate interface has long been thought to promote long ruptures and high moment release, and so we suspect that northern Cascadia and northern Sumatra may be prone to large ruptures due to the masking of other structures by large influxes of sediment on the subducting plate. By comparison, the relatively thin sediment supply at Nankai may allow these structural boundaries to play a greater role in rupture propagation and moment release. The smaller southern Cascadia ruptures are also consistent with this model, with structural control taking precedence as the sediment supply thins southward.

Chemostratigraphy of Subduction Initiation: Boninite and Forearc Basalt from IODP Expedition 352

NASA Astrophysics Data System (ADS)

Shervais, John; Haugen, Emily; Godard, Marguerite; Ryan, Jeffrey G.; Prytulak, Julie; Li, Hongyan; Chapman, Timothy; Nelson, Wendy R.; Heaton, Daniel E.; Kirchenbaur, Maria; Shimizu, Kenji; Li, Yibing; Whattam, Scott A.; Almeev, Renat; Sakuyama, Tetsuya; Reagan, Mark K.; Pearce, Julian A.

2017-04-01

The Izu-Bonin forearc has been the focus of several recent IODP (International Ocean Discovery Program) expeditions studying the geophysical, petrologic, and chemical response to subduction initiation and its potential relationship to ophiolite genesis. IODP Expedition 352 cored four holes in the Izu-Bonin forearc near Chichi Jima in order to document the petrologic and chemical evolution of nascent subduction zones. Holes U1440 and U1441, drilled closest to the trench, sampled forearc basalt (FAB). U1439 and U1442, drilled stratigraphically up-section and farther from the trench, sampled boninite, high-Mg andesite, and basalt. FAB are characterized by MORB-like compositions, with relatively constant Ti, Zr, and Ti/Zr. In general, more primitive FAB are found in the lower part of the section. In detail, FAB have lower Na, Ti, P, and Zr, lower Ti/V ratios, and are LREE-depleted relative to MORB. Best fit models for the least evolved FAB and a depleted MORB mantle (DMM) source require extraction of 1% melt in the garnet lherzolite field and 19% melt extraction in the spinel lherzolite field (relative to 8-10% melt of DMM to produce MORB). Three types of boninite were found: high silica boninite (HSB), low silica boninite (LSB), and basaltic boninite (BB), as well as high Mg andesites (HMA). HSB, the youngest unit in both U1439 and U1442, is underlain by LSB-BB-HMA lavas, which often occur in mixed magma zones with evolved boninite and basalt. Boninites are distinguished by co-variations in SiO2-MgO and TiO2-MgO, and by Ti/Zr ratios, which increase from HSB through LSB to BB. HSB, LSB and BB define parallel trends in TiO2-MgO space: a low Ti trend represented by LSB and BB, and a lower Ti trend represented by HSB. All of the boninite suite rocks are slightly LREE-rich relative to MORB. LSB and BB have flat REE patterns relative to primitive mantle, whereas HSB are slightly LREE-rich. These trends require distinct source compositions in HSB relative to LSB/BB. The decrease in Ti/Zr from BB to HSB suggests a slab melt component. Melting models (non-modal, fractional) for boninites require additional partial melting of a residual source more depleted than DMM, and mixing with less depleted melts. The data require a heterogeneous source during subduction initiation, tapping progressively more refractory mantle through time, and showing progressive enrichment in slab components.

Magmatism and the Shallowing of the Chilean Flatslab in the Central Andes

NASA Astrophysics Data System (ADS)

Kay, S. M.

2014-12-01

The magmatic history of the flatslab region between the Central and Southern Andean volcanic zones reflects shallowing of the slab, lithospheric thinning, narrowing of the asthenospheric wedge, crustal thickening and forearc removal by subduction erosion. Newly revised contours on the northern margin of the modern flatslab (Mulcahy et al. 2014) show the flattest part extends from ~28° to 33°S and is bounded by Pleistocene volcanic activity. An eastward broadening of the magmatic arc began after 18 Ma as westward drift of South America accelerated, but the most distinctive retroarc magmatism occurred after near normal subduction of the southward drifting Juan Fernandez Ridge began at ~11 Ma and ended as magmatism ceased in the Pampean ranges, ~ 700 km east of the trench at ~4.7 Ma. Recent seismic work in the retroarc area indicate a ~60 km thick crust under the Precordillera fold-thrust belt with transitions at ~20 and ~40 km that are considered to be the top of crystalline basement and an eclogitic facies transition. Chemical constraints from ~15-7 Ma magmatic rocks suggest eclogization is related to crustal thickening over the shallowing slab in accord with field relations for major thrusting in the region by ~8-7 Ma. High Ba/Th ratios in <9 Ma volcanic rocks are interpreted to reflect phengite breakdown in the mantle wedge with the fluids facilitating eclogization of the lower crust. Evidence for mantle melt contributions in the magmas up until ~7 Ma comes from more primitive isotopic values in 1088-1251 Ma amphibolite and granulite facies xenoliths (eNd = 0 to -3; 87Sr/86Sr =704-0.710) than in Miocene volcanic rocks (eNd = 0-1.7; 0.70325-0.70345; zircon eHf ~ 0). From ~8 to 3 Ma, the active volcanic arc front near 28°S and 33°S was translated ~ 40-50 km eastward in a suspected response to forearc removal by subduction erosion. Given the position of the arc and distance to the trench, the same amount of forearc was likely removed in the intervening flatslab region. Trapping of subducted forearc material in the mantle wedge could help to explain a low Vp/Vs ratios (1.65-1.72, Wagner et al. 2008 ) in the mantle wedge above the flat-slab as a low Vp could result from orthopyroxene formation by reaction of silicic material with the mantle wedge and a high Vs can be explained by the current slab being too cool to hydrate the mantle wedge.

Geologic map of the Yacolt quadrangle, Clark County, Washington

USGS Publications Warehouse

Evarts, R.C.

2006-01-01

The Yacolt 7.5' quadrangle is situated in the foothills of the western Cascade Range of southwestern Washington approximately 35 km northeast of Portland, Oregon. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. Volcanic and shallow-level intrusive rocks emplaced early in the history of the arc underlie most of the Yacolt quadrangle, forming a dissected and partly glaciated terrain with elevations between 250 and 2180 ft (75 and 665 m). The bedrock surface slopes irregularly but steeply to the southwest, forming the eastern margin of the Portland Basin, and weakly consolidated Miocene and younger basin-fill sediments lap up against the bedrock terrain in the southern part of the map area. A deep canyon, carved by the East Fork Lewis River that flows westward out of the Cascade Range, separates Yacolt and Bells Mountains, the two highest points in the quadrangle. Just west of the quadrangle, the river departs from its narrow bedrock channel and enters a wide alluvial floodplain. Bedrock of the Yacolt quadrangle consists of near-horizontal strata of Oligocene volcanic and volcaniclastic rocks that comprise early products of the Cascade volcanic arc. Basalt and basaltic andesite flows predominate. Most were emplaced on the flanks of a large mafic shield volcano and are interfingered with crudely bedded sections of volcanic breccia of probable lahar origin and a variety of well bedded epiclastic sedimentary rocks. At Yacolt Mountain, the volcanogenic rocks are intruded by a body of Miocene quartz diorite that is compositionally distinct from any volcanic rocks in the map area. The town of Yacolt sits in a north-northwest-trending valley apparently formed within a major fault zone. Several times during the Pleistocene, mountain glaciers moved down the Lewis River valley and spread southward into the map area. The largest glacier(s) covered the entire map area north of the East Fork Lewis River except for the summit of Yacolt Mountain. As the ice receded, it left behind a sculpted bedrock topography thickly mantled by drift, and deposited outwash in the fault-bounded valley at Yacolt and along the East Fork Lewis River valley. This map is a contribution to a program designed to improve geologic knowledge of the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. More detailed information on the bedrock and surficial geology of the basin and its surrounding area is necessary to refine assessments of seismic risk, ground-failure hazards and resource availability in this rapidly growing region.

Geophysical investigations of underplating at the Middle American Trench, weathering in the critical zone, and snow water equivalent in seasonal snow

NASA Astrophysics Data System (ADS)

St. Clair, James

This dissertation consists of four chapters that are broadly related through the use of geophysical methods to investigate Earth processes. In Chapter 1, an along-strike seismic reflection/refraction data set is used to investigate the plate boundary beneath the forearc offshore Costa Rica. The convergent margin offshore Costa Rica is representative of the 19,000 km of subduction zones that are considered to be erosive, or that experience a net mass loss over time. At these margins, sediments along with material that is tectonically eroded from the overlying plate are presumably carried down the subduction zones and recycled into the mantle. In addition to the mass that they represent, sediments, eroded upper-plate material, and subducted oceanic crust carry fluids into the subduction zone, which influence both magma generating processes and the chemical composition of arc lavas. Thus, understanding the ultimate fate of subducted material along these margins is critical for evaluating both the chemical and mass balances. Beneath the forearc offshore Costa Rica, we observe an ˜40 km long, 1-to-3 km-thick lens of material sitting directly above the subducting Cocos plate. Directly above this lens, the forearc shows evidence for long-term uplift consistent with the steady growth of this lens. Our results suggest that the convergent margin at Costa Rica experience simultaneous outer-forearc erosion and underplating beneath the inner forearc. In Chapter 2, a combination of three-dimensional stress modeling and landscape scale geophysical imaging is used to test the hypothesis that topographic perturbations to regional stress fields control lateral variations in bedrock permeability. The permeability of bedrock fractures influences groundwater flow, water and nutrient availability for biota, chemical weathering rates, and the long-term evolution of life-sustaining layer at Earth's surface commonly referred to as the "critical zone" (CZ). The results of this study indicate that to a first order, the permeability structure of the CZ can be predicted with knowledge of the regional tectonic stress field and local topography. In landscapes characterized by strongly compressive tectonic stresses or closely space ridges and valleys, deep zones of permeable bedrock are found beneath ridges, while the depth to impermeable bedrock beneath drainages is comparatively shallow. In landscapes characterized by weakly compressive tectonic stresses or widely spaced ridges and valleys, the depth to impermeable bedrock is approximately uniform throughout the landscape. In Chapter 3, a semi-automated method of estimating snow water equivalent (SWE) in seasonal snow packs from common offset Ground Penetrating Radar (GPR) data is presented. Many mountainous regions of the world depend on seasonal snow for fresh water resources. Water forecasting relies principally on historical records that relate SWE observations at a limited number of locations to stream discharge. As climate change contributes to a wider range of variability in seasonal snow fall, water forecasts are likely to become less reliable, thus there is a need to find new methods of estimating how much water is stored in seasonal snow. GPR has been shown to be an effective tool for measuring SWE if the radar velocity can be measured. In this chapter, a method that was originally developed to measure seismic velocities from zero-offset seismic reflection data is applied to common-offset GPR data collected over seasonal snow. The method involves suppressing continuous reflections in the image so that the velocity information contained in diffracted energy can be exploited. The filtered images are migrated through a suite of velocities and the velocity that best focus the diffracted energy is chosen on the basis of the varimax norm, which measures how peaked the energy distribution is. GPR derived SWE estimates agree with manual measurements within the uncertainty bounds of both methods. In Chapter 4, a travel-time tomography code written in Matlab is presented. Rays are traced using the shortest path algorithm, smoothness constraints are implemented with first and second order derivative operators, and the inversion is carried out with built in Matlab functions. The primary strength of this code lies is the ability to automate monte-carlo uncertainty analyses in which a data set is inverted many times with different starting models. The code is tested with a synthetic data set.

Presentations - Herriott, T.M. and others, 2015 | Alaska Division of

Science.gov Websites

Sections Geologic Communications Alaska Geologic Data Index (AGDI) Volcanology Alaska Volcano Observatory and Location Policy and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Formation, Alaska - New insights into the sequence stratigraphy of the Late Jurassic Cook Inlet forearc

Deep long-period earthquakes west of the volcanic arc in Oregon: evidence of serpentine dehydration in the fore-arc mantle wedge

USGS Publications Warehouse

Vidale, John E.; Schmidt, David A.; Malone, Stephen D.; Hotovec-Ellis, Alicia J.; Moran, Seth C.; Creager, Kenneth C.; Houston, Heidi

2014-01-01

Here we report on deep long-period earthquakes (DLPs) newly observed in four places in western Oregon. The DLPs are noteworthy for their location within the subduction fore arc: 40–80 km west of the volcanic arc, well above the slab, and near the Moho. These “offset DLPs” occur near the top of the inferred stagnant mantle wedge, which is likely to be serpentinized and cold. The lack of fore-arc DLPs elsewhere along the arc suggests that localized heating may be dehydrating the serpentinized mantle wedge at these latitudes and causing DLPs by dehydration embrittlement. Higher heat flow in this region could be introduced by anomalously hot mantle, associated with the western migration of volcanism across the High Lava Plains of eastern Oregon, entrained in the corner flow proximal to the mantle wedge. Alternatively, fluids rising from the subducting slab through the mantle wedge may be the source of offset DLPs. As far as we know, these are among the first DLPs to be observed in the fore arc of a subduction-zone system.

Eastern boundary of the Siletz terrane in the Puget Lowland from gravity and magnetic modeling with implications for seismic hazard analysis

NASA Astrophysics Data System (ADS)

Anderson, M. L.; Blakely, R. J.; Wells, R. E.; Dragovich, J.

2011-12-01

The forearc of the Cascadia subduction zone in coastal Oregon and Washington is largely composed of a 15-30 km-thick stack of basalt flows comprising the Crescent Formation (WA) and Siletz River Volcanics (OR), and collectively termed the Siletz terrane. We are developing 3-D structural maps of the Puget Lowland to distinguish older and currently active structures for seismic hazard analysis. The boundaries of the Siletz terrane in particular may strongly influence crustal rheology and neotectonic structures of the region. Careful analysis of the areal extent of this terrane will also facilitate more accurate interpretation of seismic data and gravity anomalies, which will help define the extent and shape of overlying basins. Absence of extensive outcrop in the Lowland and a widespread veneer of Quaternary deposits require extensive subsurface geophysical studies to establish Lowland-wide crustal structure. Previous studies have used active seismic surveys and interpretation of existing industry seismic data, with several studies using gravity and magnetic data or passive-source tomography support. However, steeply dipping boundaries in the mid-crust are difficult targets for seismic study. We need to independently discriminate between potential models established by seismic data using gravity and magnetic datasets. In the Puget Lowland the Siletz is a region of high seismic wave speed, density, and magnetic susceptibility, and therefore its mid-crustal boundaries are good targets for definition by gravity and magnetic data. We present interpretations of gravity and magnetic anomalies for the Puget Lowland region that together establish the most likely position and structure of the Crescent Formation boundary in the mid-upper crust. Well-constrained physical properties of Crescent basalts inform our aeromagnetic map interpretation and give us baseline values for constructing three two-dimensional models by simultaneous forward modeling of aeromagnetic and isostatic gravity anomalies for the Lowland. Based on this work, the likely position of the eastern boundary of the Siletz terrane is east of the Puget Sound and west of the foothills of the Cascade arc, extending in a north-trending line through Lake Washington and merging to the north with the Southern Whidbey Island fault zone. Our preferred location agrees with suggested locations from past study of seismic data targeted at the Seattle basin, but we extend that location through the entire Puget Lowland by analysis of magnetic potential calculated from aeromagnetic data. We also find that the boundary is sharp and most likely dips west, suggesting a reverse-fault juxtaposition of Crescent rocks against Western Melange belt lithologies. The Crescent itself contains steeply dipping packages of basalt of contrasting magnetic character, indicating significant deformation within the Crescent formation under the Seattle uplift. Finally, the boundary location implies that the eastern third of the Seattle basin is shallower than previously estimated from gravity data.

Source Evolution After Subduction Initiation as Recorded in the Izu-Bonin-Mariana Fore-arc Crust

NASA Astrophysics Data System (ADS)

Shervais, J. W.; Reagan, M. K.; Pearce, J. A.; Shimizu, K.

2015-12-01

Drilling in the Izu-Bonin-Mariana (IBM) fore-arc during IODP Expedition 352 and DSDP Leg 60 recovered consistent stratigraphic sequences of volcanic rocks reminiscent of those found in many ophiolites. The oldest lavas in these sections are "fore-arc basalts" (FAB) with ~51.5 Ma ages. Boninites began eruption approximately 2-3 m.y. later (Ishizuka et al., 2011, EPSL; Reagan et al., 2013, EPSL) and further from the trench. First results from IODP Expedition 352 and preliminary post-cruise data suggest that FAB at Sites U1440 and U1441 were generated by decompression melting during near-trench sea-floor spreading, and that fluids from the subducting slab were not involved in their genesis. Temperatures appear to have been unusually high and pressures of melting appear to have been unusually low compared to mid-ocean ridges. Spreading rates at this time appear to have been robust enough to maintain a stable melt lens. Incompatible trace element abundances are low in FAB compared to even depleted MORB. Nd and Hf Isotopic compositions published before the expedition suggest that FAB were derived from typical MORB source mantle. Thus, their extreme deletion resulted from unusually high degrees of melting immediately after subduction initiation. The oldest boninites from DSDP Site 458 and IODP Sites U1439 and U1442 have relatively high concentrations of fluid-soluble elements, low concentrations of REE, and light depleted REE patterns. Younger boninites, have even lower REE concentrations, but have U-shaped REE patterns. Our first major and trace element compositions for the FAB through boninite sequence suggests that melting pressures and temperatures decreased through time, mantle became more depleted though time, and spreading rates waned during boninite genesis. Subduction zone fluids involved in boninite genesis appear to have been derived from progressively higher temperatures and pressures over time as the subducting slab thermally matured.

Does permanent extensional deformation in lower forearc slopes indicate shallow plate-boundary rupture?

NASA Astrophysics Data System (ADS)

Geersen, J.; Ranero, C. R.; Kopp, H.; Behrmann, J. H.; Lange, D.; Klaucke, I.; Barrientos, S.; Diaz-Naveas, J.; Barckhausen, U.; Reichert, C.

2018-05-01

Seismic rupture of the shallow plate-boundary can result in large tsunamis with tragic socio-economic consequences, as exemplified by the 2011 Tohoku-Oki earthquake. To better understand the processes involved in shallow earthquake rupture in seismic gaps (where megathrust earthquakes are expected), and investigate the tsunami hazard, it is important to assess whether the region experienced shallow earthquake rupture in the past. However, there are currently no established methods to elucidate whether a margin segment has repeatedly experienced shallow earthquake rupture, with the exception of mechanical studies on subducted fault-rocks. Here we combine new swath bathymetric data, unpublished seismic reflection images, and inter-seismic seismicity to evaluate if the pattern of permanent deformation in the marine forearc of the Northern Chile seismic gap allows inferences on past earthquake behavior. While the tectonic configuration of the middle and upper slope remains similar over hundreds of kilometers along the North Chilean margin, we document permanent extensional deformation of the lower slope localized to the region 20.8°S-22°S. Critical taper analyses, the comparison of permanent deformation to inter-seismic seismicity and plate-coupling models, as well as recent observations from other subduction-zones, including the area that ruptured during the 2011 Tohoku-Oki earthquake, suggest that the normal faults at the lower slope may have resulted from shallow, possibly near-trench breaking earthquake ruptures in the past. In the adjacent margin segments, the 1995 Antofagasta, 2007 Tocopilla, and 2014 Iquique earthquakes were limited to the middle and upper-slope and the terrestrial forearc, and so are upper-plate normal faults. Our findings suggest a seismo-tectonic segmentation of the North Chilean margin that seems to be stable over multiple earthquake cycles. If our interpretations are correct, they indicate a high tsunami hazard posed by the yet un-ruptured southern segment of the seismic gap.

Pressure-Temperature Studies and Structural Setting of Amphibolite-Grade Rocks Within the Easternmost Indus-Ysangpo Suture Zone and Forearc Complex (Tidding Formation), N. Indo-Burma Ranges of N.E. India

NASA Astrophysics Data System (ADS)

Braza, M.; Haproff, P. J.

2016-12-01

The easternmost extension of the Indus-Ysangpo suture (IYS) and Xigaze forearc complex, the Tidding Formation of northeastern India, remains the least-studied sequence representing closure of the Neotethys ocean and syn-tectonic sedimentation. In this study, we present P-T determinations coupled with detrital zircon U-Pb geochronology and detailed geologic mapping to uncover the depositional and metamorphic history of Tidding suture and forearc rocks during Himalayan orogenesis. Four mica schists were sampled from successive NW-SE-striking thrust sheets within the Dibang Valley of Arunachal Pradesh (N.E. India), southwest of the easternmost L. Cretaceous Gangdese batholith. Use of the garnet-muscovite-biotite-plagioclase (GMBP) thermobarometer and Ti-in-biotite thermometer on schist sample PH-1-8-13-26 yield peak conditions of 627 ± 28°C and 10.4 ± 1.1 kbar. Similarly, use of the garnet-biotite Fe-Mg exchange thermometer and garnet-aluminosilicate-silica-plagioclase (GASP) barometer yield 644 ± 50°C and 12 ± 1 kbar for schist sample PH-11-14-15-24 within the same thrust sheet. Both samples contain recrystallized quartz along grain boundaries and garnets contain no significant compositional zoning. At structurally lower levels, garnet chlorite schist (PH-1-8-13-8) sampled from the Mayodia klippe records peak temperatures below 650°C. Garnets display growth zoning, with increasing Mn and decreasing Fe and Mg from rim to core. Application of the Ti-in-biotite thermometer to a mafic schist (PH-1-3-13-1B) within the Mayodia klippe near a southwestward-directed thrust yields a peak temperature of 679 ± 24°C. Our study reveals metamorphism of IYS rocks occurred at deep crustal levels (>30 km) during northward Neotethys subduction. Suture rocks were subsequently exhumed by orogen-scale N-dipping thrusts during growth of the easternmost Himalayan orogen.

Along-Strike Electrical Conductivity Variations in the Incoming Plate and Shallow Forearc of the Cascadia Subduction Zone

NASA Astrophysics Data System (ADS)

Key, K.; Bedrosian, P.; Egbert, G. D.; Livelybrooks, D.; Parris, B. A.; Schultz, A.

2015-12-01

The Magnetotelluric Observations of Cascadia using a Huge Array (MOCHA) experiment was carried out to study the nature of the seismogenic locked zone and the down-dip transition zone where episodic tremor and slip (ETS) originates. This amphibious magnetotelluric (MT) data set consists of 8 offshore and 15 onshore profiles crossing from just seaward of the trench to the western front of the Cascades, with a north-south extent spanning from central Oregon to central Washington. The 71 offshore stations and the 75 onshore stations (red triangles in the image below) fit into the broader context of the more sparsely sampled EarthScope MT transportable array (black triangles) and other previous and pending MT surveys (other symbols). These data allows us to image variations in electrical conductivity along distinct segments of the Cascadia subduction zone defined by ETS recurrence intervals. Since bulk conductivity in this setting depends primarily on porosity, fluid content and temperature, the conductivity images created from the MOCHA data offer unique insights on fluid processes in the crust and mantle, and how the distribution of fluid along the plate interface relates to observed variations in ETS behavior. This abstract explores the across- and along-strike variations in the incoming plate and the shallow offshore forearc. In particular we examine how conductivity variations, and the inferred fluid content and porosity variations, are related to tectonic segmentation, seismicity and deformation patterns, and arc magma variations along-strike. Porosity inferred in the forearc crust can be interpreted in conjunction with active and passive seismic imaging results and may provide new insights on the origin of recently observed extremely high heat flow values. A companion abstract (Parris et al.) examines the deeper conductivity structure of the locked and ETS zones along the plate interface in order to identify correlations between ETS occurrence rates and inferred fluid concentrations.

Metasomatic hydration of the Oeyama forearc peridotites: Tectonic implications

NASA Astrophysics Data System (ADS)

Nozaka, Toshio

2014-01-01

In contrast to the widely recognized aspects of serpentinization, initial stages of hydration and tectonic processes of unserpentinized peridotites are still unclear, but have important implications for understanding the lithospheric architecture of supra-subduction zones. This study provides petrological evidence from the Oeyama ophiolite, SW Japan, of the effects of high-temperature metasomatic hydration immediately before the cooling and ductile deformation of forearc peridotites. Key findings in this study are: 1) complex association of high-temperature metasomatic minerals: tremolitic amphibole, cummingtonite, phlogopite, chlorite, olivine and orthopyroxene in veins and in mylonites; 2) the systematic variation in Si and Na + K contents of the tremolitic amphibole, corresponding to its mode of occurrence and mineral association; and 3) the presence of thin (< 0.7 mm) veins of fine-grained olivine accompanied by a narrow diffusion zone of the host primary olivine. On the basis of petrography and mineral chemistry, the temporal sequence of hydration and deformation of the Oeyama ophiolite is considered as follows: 1) infiltration of slab-derived fluids, causing decomposition of primary pyroxene and chemical modification of primary olivine, 2) metasomatic formation of variable modal amounts of amphibole, phlogopite, chlorite, vein-forming olivine and secondary orthopyroxene at 650-750 °C; 3) early-stage mylonitization of the hydrous peridotites in localized shear zones; and 4) syntectonic serpentinization at 400-600 °C to form serpentinite mylonites. Paragenesis and amphibole compositions suggest comparable temperature conditions for metasomatism and early-stage mylonitization. Mylonitization occurred exclusively in hydrous peridotites, and the peridotite mylonites were preferentially overprinted by syntectonic serpentinization. Diffusion profiles of olivine cut by a vein suggest rapid cooling immediately after the metasomatic fluid infiltration. From these observations and calculations, it is concluded that the exhumation of the forearc peridotites was closely related to the infiltration of high-temperature metasomatic fluids and hydration occurred under a wide range of temperature conditions.

A kinematic model for the formation of the Siletz-Crescent forearc terrane by capture of coherent fragments of the Farallon and Resurrection plates

USGS Publications Warehouse

McCrory, Patricia A.; Wilson, Douglas S.

2013-01-01

The volcanic basement of the Oregon and Washington Coast ranges has been proposed to represent a pair of tracks of the Yellowstone hotspot formed at a mid-ocean ridge during the early Cenozoic. This interpretation has been questioned on many grounds, especially that the range of ages does not match the offshore spreading rates and that the presence of continental coarse clastic sediments is difficult to reconcile with fast convergence rates between the oceanic plates and North America. Updates to basement geochronology and plate motion history reveal that these objections are much less serious than when they were first raised. Forward plate kinematic modeling reveals that predicted basement ages can be consistent with the observed range of about 55–49 Ma, and that the entire basement terrane can form within about 300 km of continental sources for clastic sediments. This kinematic model indicates that there is no firm reason to reject the near-ridge hotspot hypothesis on the basis of plate motions. A novel element of the model is the Resurrection plate, previously proposed to exist between the Farallon and Kula plates. By including the defunct Resurrection plate in our reconstruction, we are able to model the Farallon hotspot track as docking against the Oregon subduction margin starting about 53 Ma, followed by docking of the Resurrection track to the north starting about 48 Ma. Accretion of the Farallon plate fragment and partial subduction of the Resurrection fragment complicates the three-dimensional structure of the modern Cascadia forearc. We interpret the so-called “E” layer beneath Vancouver Island to be part of the Resurrection fragment. Our new kinematic model of mobile terranes within the Paleogene North American plate boundary allows reinterpretation of the three-dimensional structure of the Cascadia forearc and its relationship to ongoing seismotectonic processes.

On the relationship between forearc deformation, frictional properties and megathrust earthquakes

NASA Astrophysics Data System (ADS)

Cubas, Nadaya; Singh, Satish

2014-05-01

A better understanding of the relation between the structural geology and the morphology of forearc wedges with frictional properties could provide insights on earthquake mechanics. Therefore, we study, with simple mechanical analysis allowing for inverse studies, the three subduction zones that produced the major earthquakes of the 21st century : Central Chile (Maule 2010 Mw 8.8), NE Japan (Tohoku-Oki 2011 Mw 9.0) and Sumatra (Sumatra-Andaman 2004 Mw 9.1, Nias 2005 Mw 8.7). We first apply the critical taper theory that yields the effective friction of the subduction interface, the wedge internal friction and pore fluid pressure. We then apply the limit analysis approach to constrain variations of frictional properties along the megathrust from the location and style of forearc faulting. We show that seismic ruptures most often coincide with the mechanically stable part of the wedge whereas regions undergoing aseismic slip are at critical state, consistent with evidence for active deformation. In the rupture area, we found a low effective dynamic friction, probably reflecting strong dynamic weakening. Where no frontal rupture was observed, we obtain intermediate values of long-term effective friction along the frontal aseismic zone, implying hydrostatic pore pressure. On the contrary, where the rupture reached the seafloor (Tohoku-Oki earthquake, parts of the Sumatra-Andaman 2004 earthquake), a very low long-term effective friction and a high pore pressure are observed. The difference of properties of the frontal wedge might reflect differences in permeability. A lower permeability would enhance dynamic weakening and allow for frontal propagation of ruptures. We also show that spatial variations of frictional properties between aseismic and seismogenic zones can lead to the activation of splay faults. We also show that a high pore pressure along accretionary wedges can change the vergence of frontal thrusts. As a consequence, wedge morphology and deformation can be used to improve seismic and tsunamigenic risk assessment.

Late Quaternary uplift rate inferred from marine terraces, Shimokita Peninsula, northeastern Japan: A preliminary investigation of the buried shoreline angle

NASA Astrophysics Data System (ADS)

Matsu'ura, Tabito; Kimura, Haruo; Komatsubara, Junko; Goto, Norihisa; Yanagida, Makoto; Ichikawa, Kiyoshi; Furusawa, Akira

2014-03-01

After estimating tectonic uplift rates along the northern part of the northeast Japan forearc (the overriding plate in the northeast Japan subduction zone) by mapping the elevation of the inner edges of marine terrace surfaces, we refined this estimate through elevation measurements of the buried shoreline angle beneath well-dated marine terrace surfaces, from which we could derive more accurate paleo-sea levels. The uplift rate initially inferred from the inner edge of marine terrace T4, correlated with marine isotope stage MIS 5e by tephrochronology, increases eastward from 0.11-0.22 m ky- 1 around the backarc volcanic front to 0.17-0.32 m ky- 1 in the forearc on the peninsula of Shiriyazaki. We refined the uplift rates for T4, on the basis of the shoreline angle elevation, from the reconstructed profile of the paleo-sea cliff and wave-cut platform on a rocky coast and the reconstructed profile of the swash zone sediments and terrace deposits on a sandy coast. The refined uplift rates were 0.14-0.25 m ky- 1 on the rocky coast and 0.14-0.23 m ky- 1 on the sandy coast, slightly slower than the rates we inferred from the height of T4 and about one-half to three-fourths of previously reported rates. By extrapolation from the example of the sandy coast, the refined uplift rate around the volcanic front was 0.09-0.18 m ky- 1. The vertical deformation across the forearc of the Shimokita Peninsula since MIS 5e is possibly associated with regional isostatic uplift of 0.09-0.18 m ky- 1 and anticlinal deformation by an offshore fault, interpreted from acoustic profiles, of 0.05-0.07 m ky- 1.

Mapping the Mariana Seismogenic Zone Through the Measurement of Geochemical Tracers in Serpentinite Seamounts

NASA Astrophysics Data System (ADS)

Hulme, S. M.; Wheat, C. G.; Mottl, M. J.; Fryer, P.

2003-12-01

The Mariana forearc contains tens of seamounts up to 2 km high and 20-50 km in diameter. These seamounts were formed by serpentinite mud volcanism, sometimes in combination with uplift of serpentinized forearc mantle blocks, in which fluids driven off of the subducting slab infiltrated the overlying mantle and serpentinized the harzburgite and dunite rocks creating a density imbalance within the mantle. The resulting fluid-rock matrix flows along faults and exposes mantle-sourced serpentinite muds, blueschist facies metamorphosed mafic clasts, and slab-sourced fluids at the seafloor. The protrusion of these materials allows direct observation of active subduction zone components that are elsewhere buried beneath kilometers of rock and sediment. A multi-disciplinary survey of the Mariana Forearc was conducted in the spring of 2003 to study the biogeochemical properties of this mud volcanism. Seven different seamounts were sampled using shipboard and subsea coring techniques employing RV Thomas G. Thompson and ROV Jason II, respectively. Pore waters were extracted from these sediment cores and analyzed for several chemical constituents at sea. The measured values were consistent with preliminary work from 1997. Systematic trends in chemical composition of these high pH fluids (up to 12.3) are observed with distance from the trench (proxy for the depth to slab). These trends include low alkalinity and high Ca near the trench (e.g., Blue Moon Seamount; 0.26 mmol alkalinity/kg and 55 mmol Ca/kg), and high alkalinity and low Ca further from the trench (e.g., Big Blue Seamount; 69 mmol alkalinity/kg and 0.14 mmol Ca/kg) consistent with carbonate dissolution at the top of the plate between depths of 17 km and 22 km. Here we report results from trace element analyses that similarly show trends across the forearc region. For example, fluids upwelling at Baby Blue Seamount have; 58 μ mol Sr/kg, 31 μ mol Li/kg, 1.4 μ mol Rb/kg, 10 nmol Cs/kg, 0.2 μ mol Ba/kg, 0.1 μ mol Mo/kg, 0.6 nmol U/kg, and 5 nmol Y/kg. In contrast, fluids from Big Blue Seamount, only 23 km away, have; 10 μ mol Sr/kg, 0.7 μ mol Li/kg, 6 μ mol Rb/kg, 0.2 μ mol Cs/kg, 60 nmol Ba/kg, 0.1 μ mol Mo/kg, 0.2 μ mol U/kg, and 0.1 nmol Y/kg.Trace element analyses for a host of chemical species and for each of the sampled seamounts offer insight into the conditions and interactions currently occurring within the Mariana seismogenic zone.

Tectonics and Relative Plate Motions Around the Andaman Sea and Sumatra

NASA Astrophysics Data System (ADS)

Eguchi, T.; Murakoshi, T.

2005-12-01

There are several R-F-R models of the active back-arc opening system in the Andaman Sea proposed by authors, e.g., Curray et al. (1978), Eguchi et al. (1979), Eguchi (1991), Mantovani et al. (2001) and Nielsen et al. (2004). Most of the previous authors, except Eguchi et al. (1978) and Eguchi (1991), documented NW-SE or NNW-SSE striking relative plate motion at the Central Andaman Rift. Recent multi-beam bathymetry study by GEODYSSEA Project group confirmed the detailed configuration of the ENE-WSW striking Central Andaman Rift and adjacent transcurrent faults. All of data from the marine survey and recent shallow earthquakes as well as their strike-slip type focal mechanisms along the N-S striking fault segment at 95.2E from 11N to 12.5N support the approximate N-S opening at the adjacent Central Andaman Rift. The magnetic anomaly survey data of Curray et al. (1978) suggest that, in the case of N-S opening, the rate becomes 4.0 cm/y, although Curray et al. (1978) proposed the total rate of 3.7 cm/y in the case of NNW-SSE opening. We then studied the realistic geometry of plate boundaries from Sumatra through the Andaman sea including the Central Andaman Rift to Myanmar, using recent seismological data and GPS studies. As is important, the Sundaland is not part of the Eurasia plate as revealed by recent GPS surveys. Furthermore, based on data of GPS velocity vectors w.r.t. Eurasia plate (e.g., Pradirodirdjo et al., 1997; Michel et. al., 2001), we can recognize some differential motion within the NW-SE striking fore-arc block, which is bounded by the Sumatra transcurrent fault and Java trench. The GPS data indicate 'differential motion' in both the trench-parallel and trench-normal directions within the NW-SE striking fore-arc block. We must resolve whether such kind differential movement within the fore-arc block is steady or not, to investigate the detailed spatio-temporal nature of dynamic coupling at the subduction zones with intermittent activity of larger interplate seismic events. We have constrained 'plate motion polygons' at selected points by modifying the result of Eguchi (1991). For example, by assuming the NUVEL 1 model and introducing the shear faulting with the averaged rate of 2.6 cm/y along the Sumatra fault system, we obtained the ENE-WSW plate convergence with the rate of 1.2 cm/y at 12N and the convergence of 3.0 +- 0.3 cm/y at 5N, between the Indo-Australia plate and the fore-arc block at the western Java trench subduction zone. We, however, cannot constrain the instantaneous rotation vectors of the relative plate motions, mainly because of limited observation data.

Tectonics, climate and mountain building in the forearc of southern Peru recorded in the 10Be chronology of low-relief surface abandonment

NASA Astrophysics Data System (ADS)

Hall, S. R.; Farber, D.; Audin, L.; Finkel, R. C.

2009-12-01

Regional low-relief surfaces have long been recognized as key features to understanding the response of landscapes to surface uplift. The canonical models of low-relief surface formation involve an extended period of tectonic quiescence during which, the fluvial systems bevel the landscape to a uniform elevation. This quiescent period is punctuated by a period(s) of surface uplift, which causes fluvial incision thereby abandoning the low-relief landscape. Over time, as rivers continue to incise in response to changes in sediment supply, river discharge, and base level fall, pieces of the relict low-relief landscape are left as abandoned remnants stranded above active channels. By determining the age of abandoned surfaces, previous workers have identified the onset of a change in the tectonic or climatic setting. One key assumption of this model is that the low-relief surfaces are truly abandoned with no current processes further acting on the surface. To improve our understanding of the underlying assumptions and problems of low-relief surface formation, we have used detailed mapping and absolute dating with cosmogenic 10Be to investigate surfaces in the hyperarid forearc region of southern Peru between ~14° and 18°S. Within this region, marine terraces and strath terraces reflect Plio-Pleistocene surface uplift, and together with the hyperarid climate, ongoing surface uplift provides a perfect natural laboratory to examine the processes affecting low-relief surface abandonment and preservation. With our new chronology we address: 1) the space and time correlations of surfaces, 2) incision rates of streams in response to base-level fall, and 3) surface erosion rates. Multiple surfaces have yielded 10Be surface abandonment ages that span >2 Ma - ~35 ka. While most of the surfaces we have dated are considerably less than 1 Ma, we have located two surfaces which are likely older than 2 Ma and constrain regional erosion rates to be <0.5mm/yr. Where the surface age and elevation relative to current base level are known, we can estimate incision (uplift) rates of ~0.1-0.3mm/yr. These ages, erosion rates, and uplift rates suggest that the hyperarid forearc landscape has been recently modified (surface uplift, climate events), while paradoxically, very little erosion is occurring on these surfaces. The four surface abandonment age clusters we observe correlate with cold wet periods preceding deglaciation on the Altiplano. Thus, we suggest that the recorded chronology of Pleistocene surface abandonment results from the interaction and linkage of surface uplift in the forearc, to specific climatic periods in the high Andes that produce high discharge through the fluvial system.

Trench-parallel variations in Pacific and Indo-Australian crustal velocity structure due to Louisville Ridge seamount subduction

NASA Astrophysics Data System (ADS)

Stratford, W. R.; Knight, T. P.; Peirce, C.; Watts, A. B.; Grevemeyer, I.; Paulatto, M.; Bassett, D.; Hunter, J.; Kalnins, L. M.

2012-12-01

Variations in trench and forearc morphology, and lithospheric velocity structure are observed where the Louisville Ridge seamount chain subducts at the Tonga-Kermadec Trench. Subduction of these seamounts has affected arc and back-arc processes along the trench for the last 5 Myr. High subduction rates (80 mm/yr in the north, 55 mm/yr in the south), a fast southwards migrating collision zone (~180 km/myr), and the obliquity of the subducting plate and the seamount chain to the trench, make this an ideal location to study the effects of seamount subduction on lithospheric structure. The "before and after" subduction regions have been targeted by several large-scale geophysical projects in recent years; the most recent being the R/V Sonne cruise SO215 in 2011. The crust and upper mantle velocity structure observed in profiles along strike of the seamount chain and perpendicular to the trench from this study, are compared to a similar profile from SO195, recorded ~100 km to the north. The affects of the passage of the seamounts through the subduction system are indicated by velocity anomalies in the crust and mantle of the overriding plate. Preliminary results indicate that in the present collision zone, mantle velocities (Pn) are reduced by ~5%. Around 100 km to the north, where seamounts are inferred to have subducted ~1 Myr ago, a reduction of 7% in mantle P-wave velocity is observed. The width of the trench slope and elevation of the forearc also vary along strike. At the collision zone a >100 km wide collapse region of kilometre-scale block faults comprise the trench slope, while the forearc is elevated. The elevated forearc has a 5 km think upper crust with a Vp of 2.5-5.5 km/s and the collapse zone also has upper crustal velocities as low as 2.5 km/s. To the east in the Pacific Plate, lower P-wave velocities are also observed and attributed to serpentinization due to deep fracturing in the outer trench high. Large bending faults permeate the crust and the Osbourn Seamount, currently on the verge of subduction, is fractured stepwise down into the trench. Pn velocities in the hinge zone of the Pacific Plate are as low as 7.3 km/s indicating that fracturing and serpentinization may also extend to sub-crustal depths. Finally, trench-parallel variations in subduction zone velocity structure are used to infer the degree to which seamount subduction has altered the physical state of the Pacific and Indo-Australian plates both pre- and post subduction.

Drainage Asperities on Subduction Megathrusts

NASA Astrophysics Data System (ADS)

Sibson, R. H.

2012-12-01

Geophysical observations coupled with force-balance analyses suggest that the seismogenic shear zone interface of subduction megathrusts is generally fluid-overpressured to near-lithostatic values (λv = Pf/σv > 0.9) below the forearc hanging-wall, strongly modulating the profile of frictional shear resistance. Fluid sources include the accretionary prism at shallow levels and, with increasing depth, metamorphic dehydration of material entrained within the subduction shear zone together with progressive metamorphism of oceanic crust in the downgoing slab. Solution transfer in fine-grained material contained within the deeper subduction shear zone (150 < T < 350°C) likely contributes to hydrothermal sealing of fractures. A dramatic difference may therefore exist between low prefailure permeability surrounding the megathrust and high postfailure fracture permeability along the rupture zone and adjacent areas of aftershock activity. Observed postseismic changes in the velocity structure of the fore-arc hanging-wall led Husen and Kissling (2001) to propose massive fluid loss across the subduction interface following the 1995 Antofagasta, Chile, Mw8.0 megathrust rupture. Such trans-megathrust discharges represent a variant of 'fault-valve' action in which the subduction interface itself acts as a seal trapping overpressured fluids derived from metamorphic dehydration beneath. In low-permeability assemblages the maximum sustainable overpressure is limited by the activation or reactivation of brittle faults and fractures under the prevailing stress state. Highest overpressures tend to occur at low differential stress in compressional stress regimes. Loci for fluid discharge are likely determined by stress heterogeneities along the megathrust (e.g. the hangingwall of the rupture at its downdip termination). Discharge sites may be defined by swarm aftershocks defining activated fault-fracture meshes. However, fluid loss across a subduction interface will be enhanced when the stress-state in the forearc hanging-wall switches from compressional reverse-slip faulting before failure to extensional normal-slip faulting postfailure, as occurred during the 2011 Mw9.0 Tohoku megathrust rupture. Mean stress and fault-normal stress then change from being greater than vertical stress prefailure, to less than vertical stress postfailure. Postfailure reductions in overpressure are expected from a combination of poroelastic effects and fluid loss through fault-fracture networks, enhancing vertical permeability. Mineralised fault-fracture meshes in exhumed fore-arc assemblages (e.g. the Alaska-Juneau Au-quartz vein swarm) testify to the episodic discharge of substantial volumes of hydrothermal fluid (< tens of km3). Localized drainage from the subduction interface shear zone increases frictional strength significantly, giving rise to a postfailure strength asperities. Anticipated strength increases from such fluid discharge depends on the magnitude of the drop in overpressure but are potentially large (< hundreds of MPa). Time to the subsequent failure is then governed by reaccumulation of fluid overpressure as well as shear stress along the subduction interface.

Modelling the interplate domain in thermo-mechanical simulations of subduction: Critical effects of resolution and rheology, and consequences on wet mantle melting

NASA Astrophysics Data System (ADS)

Arcay, Diane

2017-08-01

The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle (ΔEa) is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, zcoup . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of zcoup if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any ΔEa . The stiffer the crust is, that is, the lower ΔEa is, the shallower zcoup is (60 km depth if ΔEa = 20 kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel (ΔEa > 135 J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if ΔEa = 145 kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. zcoup then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of ΔEa are underlined: 80-120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10-40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4-20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, zcoup , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.

Thermal structure and geodynamics of subduction zones

NASA Astrophysics Data System (ADS)

Wada, Ikuko

The thermal structure of subduction zones depends on the age-controlled thermal state of the subducting slab and mantle wedge flow. Observations indicate that the shallow part of the forearc mantle wedge is stagnant and the slab-mantle interface is weakened. In this dissertation, the role of the interface strength in controlling mantle wedge flow, thermal structure, and a wide range of subduction zone processes is investigated through two-dimensional finite-element modelling and a global synthesis of geological and geophysical observations. The model reveals that the strong temperature-dependence of the mantle strength always results in full slab-mantle decoupling along the weakened part of the interface and hence complete stagnation of the overlying mantle. The interface immediately downdip of the zone of decoupling is fully coupled, and the overlying mantle is driven to flow at a rate compatible with the subduction rate. The sharpness of the transition from decoupling to coupling depends on the rheology assumed and increases with the nonlinearity of the flow system. This bimodal behaviour of the wedge flow gives rise to a strong thermal contrast between the cold stagnant and hot flowing parts of the mantle wedge. The maximum depth of decoupling (MDD) thus dictates the thermal regime of the forearc. Observed surface heat flow patterns and petrologically and geochemically estimated mantle wedge temperatures beneath the volcanic arc require an MDD of 70--80 km in most, if not all, subduction zones regardless of their thermal regime of the slab. The common MDD of 70--80 km explains the observed systematic variations of the petrologic, seismological, and volcanic processes with the thermal state of the slab and thus explains the rich diversity of subduction zones in a unified fashion. Models for warm-slab subduction zones such as Cascadia and Nankai predict shallow dehydration of the slab beneath the cold stagnant part of the mantle wedge, which provides ample fluid for mantle wedge serpentinization in the forearc but little fluid for melt generation beneath the arc. In contrast, models for colder-slab subduction zones such as NE Japan and Kamchatka predict deeper dehydration, which provides greater fluid supply for melt generation beneath the arc and allows deeper occurrence of intraslab earthquakes but less fluid for forearc mantle wedge serpentinization. The common MDD also explains the intriguing uniform configuration of subduction zones, that is, the volcanic arc always tends to be situated where the slab is at about 100 km depth. The sudden onset of mantle wedge flow downdip of the common MDD overshadows the thermal effect of the slab, and the resultant thermal field and slab dehydration control the location of the volcanic arc. The recognition of the fundamental importance of the MDD has important implications to the study of geodynamics and earthquake hazard in subduction zones.

The TIPTEQ seismological network in Southern Chile - Studying the Seismogenic Coupling Zone

NASA Astrophysics Data System (ADS)

Haberland, C.; Rietbrock, A.; Lange, D.; Bataille, K.; Hofmann, S.; Dahm, T.; Scherbaum, F.; Tilman, F.; Hermosilla, G.; Group, T. S.

2005-12-01

Subduction zones generate the world's largest and most destructive earthquakes. Understanding the factors leading to these earthquakes in the coupling zone of convergent margins and their interrelation with surface deformation are the main aims of the international and interdisciplinary research initiative TIPTEQ (From The Incoming Plate To megaThrust EarthQuake Processes) which is financed by the German Ministry for Education and Research (BMBF). These aims shall be achieved by obtaining high resolution images of the seismogenic zone and the forearc structure, which will form the base for identifying the processes involved. Our studies focus spatially on the nucleation zone of the Mw=9.5 1960 Chile earthquake, the worldwide largest instrumentally ever recorded earthquake. Within this project a large temporary seismological network is installed in southern Chile since Nov. 2004, covering the forearc between 37° and 39°S. It consists of 120 digitally recording and continuously running seismic stations equipped with short period sensors. The network covers the forearc between 37° and 39°S. The onshore network is complemented by 10 ocean bottom seismometers/hydrophones (OBS/OBH), and the stations (except for 20 stations which will operate until October 2005) were in operation until July 2005. The network is characterized by very short station spacings in the centre which will assure an increased quantity of P and S phase onset times and which will achieve the observation of the whole wavefield (coherent waveforms). A second network of 20 onshore and 20 offshore stations is installed at and around Chiloe Island for a one year period. Until now we collected about 1.2 TByte of data. First steps of the data processing are the event detection, the onset time picking, and the localisation of the (local) earthquakes (catalog). Later steps include the determination of the velocity and attenuation structure (tomography), the analysis of the stress field by moment tensor inversion, the analysis of later phases such as guided waves and scattered/converted/reflected arrivals, the analysis of teleseismic recordings (receiver functions, anisotropy), and many more. The results will be jointly interpreted with the findings of controlled source seismic studies, magnetotelluric measurements, and surface geological studies. Each day 2 to 3 local earthquakes and several teleseismic events were recorded. We present first results including data examples, seismicity distribution, and first 1D velocity models of this ongoing research project. Most of the crustal seismicity in the northern network is concentrated in two clusters close to the coast line; Benioff seismicity can be found down to 100 km depth. Between 41.5° and 43.5° S (at and around Chiloe Island) we also found several earthquakes in the continental (forearc) crust and in the downgoing slab.

A Possible Explanation for the Absence of Large Tsunami Following the Earthquake of March 28, 2005 in the Northern Sumatra: No Major Submarine Landslide

NASA Astrophysics Data System (ADS)

Lee, S.-M.

2005-05-01

In just over three months, two large earthquakes (magnitudes Mw = 9.0 and 8.7), separated only by a few hundred kilometers in epicenter distance, shook the fore-arc region of the northern Sumatra. According to preliminary reports released by USGS (http://neic.usgs.gov), the seismic moment tensor solutions of the two events match quite well, suggesting that the movement of fault blocks that triggered them was similar. Yet the two earthquakes had drastically different consequence: the December 2004 earthquake triggered a catastrophic tsunami whereas the March 2005 earthquake did not. This difference raises an important question that the December 2004 tsunami was not actually triggered by the faulting itself but by submarine landslide. Earthquake-triggered submarine landslides can sometimes be overlooked as the direct cause of major tsunamis because their location often coincides with the fault rupture zones, but are known to be an important source especially along the active margins with high sedimentation rate. Scientists suspect that a similar event happened on July 17, 1998, when a magnitude 7.0 earthquake triggered by low-angle thrust fault caused a submarine slumping, which in turn generated the tsunami that devastated the coastal region in NW Papua New Guinea, killing more than 2000 human lives. If this was the case in Sumatra, it explains why a major tsunami did not occur following the March 2005 earthquake. A large amount of the sediment deposited along the continental margin by the erosion of high mountain ranges of Sumatra had already slid down the continental slope during the earthquake on December 26, 2004, and therefore not much volume of sediment was left to slide down and generate another major tsunami. The submarine topography may have also been a factor as the area around the epicenter of March 2005 earthquake has a longer extent of steep down-slope section compared to that of December 2004. In addition, the region around December 2004 earthquake has well-developed fore-arc basin which runs sub-parallel to the coastline. Multi-beam bathymetry HMS Scott immediately following the December 2004 earthquake shows evidence for a wide-spread submarine landslide. However, it is unclear at this stage if the submarine landslide was large enough to explain the far-field tsunami observations. Facilitated by humid tropic condition and steep relief, as in Papua New Guinea, the high mountains of Sumatra produce disproportionately a large amount of sediment which is being transported to the ocean. In a matter of time, the sediment piled up on the continental shelf and slope will find its way to the bottom of the seafloor, which in this case would be near the trench axis, approximately 5 km below the sea level. Thus, the March 2005 earthquake provides us an important insight that the accumulation of sediment as opposed to tectonic stress may have been a key factor in generating the tsunami of December 26, 2004.

Petrography and geochemistry of clastic rocks within the Inthanon zone, northern Thailand: Implications for Paleo-Tethys subduction and convergence

NASA Astrophysics Data System (ADS)

Hara, Hidetoshi; Kunii, Miyuki; Hisada, Ken-ichiro; Ueno, Katsumi; Kamata, Yoshihito; Srichan, Weerapan; Charusiri, Punya; Charoentitirat, Thasinee; Watarai, Megumi; Adachi, Yoshiko; Kurihara, Toshiyuki

2012-11-01

The provenance, source rock compositions, and sediment supply system for a convergence zone of the Paleo-Tethys were reconstructed based on the petrography and geochemistry of clastic rocks of the Inthanon Zone, northern Thailand. The clastic rocks are classified into two types based on field and microscopic observations, the modal composition of sandstone, and mineral compositions: (1) lithic sandstone and shale within mélange in a Permo-Triassic accretionary complex; and (2) Carboniferous quartzose sandstone and mudstone within the Sibumasu Block. Geochemical data indicate that the clastic rocks of the mélange were derived from continental island arc and continental margin settings, which correspond to felsic volcanic rocks within the Sukhothai Zone and quartz-rich fragments within the Indochina Block, respectively. The results of a mixing model indicate the source rocks were approximately 35% volcanic rocks of the Sukhothai Zone and 65% craton sandstone and upper continental crust of the Indochina Block. In contrast, Carboniferous quartzose sedimentary rocks within the Sibumasu Block originated from a continental margin, without a contribution from volcanic rocks. In terms of Paleo-Tethys subduction, a continental island arc in the Sukhothai Zone evolved in tandem with Late Permian-Triassic forearc basins and volcanic activity during the Middle-early Late Triassic. The accretionary complex formed contemporaneously with the evolution of continental island arc during the Permo-Triassic, supplied with sediment from the Sukhothai Zone and the Indochina Block.

Seismic properties of lawsonite eclogites from the southern Motagua fault zone, Guatemala

NASA Astrophysics Data System (ADS)

Kim, Daeyeong; Wallis, Simon; Endo, Shunsuke; Ree, Jin-Han

2016-05-01

We present new data on the crystal preferred orientation (CPO) and seismic properties of omphacite and lawsonite in extremely fresh eclogite from the southern Motagua fault zone, Guatemala, to discuss the seismic anisotropy of subducting oceanic crust. The CPO of omphacite is characterized by (010)[001], and it shows P-wave seismic anisotropies (AVP) of 1.4%-3.2% and S-wave seismic anisotropies (AVS) of 1.4%-2.7%. Lawsonite exhibits (001) planes parallel to the foliation and [010] axes parallel to the lineation, and seismic anisotropies of 1.7%-6.6% AVP and 3.4%-14.7% AVS. The seismic anisotropy of a rock mass consisting solely of omphacite and lawsonite is 1.2%-4.1% AVP and 1.8%-6.8% AVS. For events that propagate more or less parallel to the maximum extension direction, X, the fast S-wave velocity (VS) polarization is parallel to the Z in the Y-Z section (rotated from the X-Z section), causing trench-normal seismic anisotropy for orthogonal subduction. Based on the high modal abundance and strong fabric of lawsonite, the AVS of eclogites is estimated as ~ 11.7% in the case that lawsonite makes up ~ 75% of the rock mass. On this basis, we suggest that lawsonite in both blueschist and eclogite may play important roles in the formation of complex pattern of seismic anisotropy observed in NE Japan: weak trench-parallel anisotropy in the forearc basin domains and trench-normal anisotropy in the backarc region.

Stress magnitude and orientation in deep coalbed biosphere off Shimokita ~IODP Expedition337 drilling project

NASA Astrophysics Data System (ADS)

Wu, H. Y.; Lin, W.; Yamada, Y.

2015-12-01

One of IODP expedition (Borehole C0020A) is located in the forearc basin formed by the subducting between Pacific plate and Eurasian plate off Shimokita Peninsula. This ~2.5km deep scientific drilling collected the high-resolution wire-line resistivity logging, caliper data, Dipole Sonic waveforms; geophysical properties measurements and core samples. The riser drilling operations produced one good conditions borehole even this drilling operation was applied right after 311 Tohoku earthquake. Based on the high-resolutions Formation Micro Imager (FMI) images, both breakout and tensile fractures along the borehole wall indicating the in-situ stress orientation are detected in the unwrapped resistivity images. In this research, a reasonable geomechanical model based on the breakout width and physical properties is constructed to estimate the stress magnitude profile in this borehole. Besides, the openhole leak-off test revealed the information of Shmin magnitude. In general, stress direction along the borehole is slight rotated to east with drilling to the bottom of the borehole. Geomechanical model constarined the principal stresses in Strike-slip stress regime to satisfy the occurrences of borehole enlargements and tensile fractures. Some blank zones with no borehole wall failure and vertical fractures indicated the stress anomaly might be controlled by local lithological facies. Comparing to the JFAST drilling, this site is out of Japan trench slip zone and shows almost parallel stress direcion to the trench (~90 degree apart of Shmin with Site C0019).

The Sunda-Banda Arc Transition: New Insights From Marine Wide-Angle Seismic Data

NASA Astrophysics Data System (ADS)

Planert, L.; Shulgin, A.; Kopp, H.; Mueller, C.; Flueh, E.; Lueschen, E.; Engels, M.; Dayuf Jusuf, M.

2007-12-01

End of 2006, RV SONNE cruise SO190 SINDBAD (Seismic and Geoacoustic Investigations along the Sunda- Banda Arc Transition) went south of the Indonesian archipelago to acquire various geophysical datasets between 112 °E and 122 °E. The main goal of the project is to investigate the modifications of the lower plate (variability in the plate roughness, transition from oceanic to continental lower plate) and their effects on the tectonics of the upper plate (development of an outer high and forearc basin, accretionary and erosive processes). The tectonic style changes in neighboring margin segments from an oceanic plate-island arc subduction along the eastern Sunda margin to a continental plate-island arc collision along the Banda margin. Moreover, the character of the incoming oceanic plate varies from the rough topography in the area where the Roo Rise is subducting off eastern Java, to the smooth oceanic seafloor of the Argo- Abyssal Plain subducting off Bali, Lombok, and Sumbawa. In order to cover the entire variations of the lower plate, seven seismic refraction profiles were conducted along four major north-south oriented corridors of the margin, at 113 °E, 116 °E, 119 °E, and 121 °E, as well as three profiles running perpendicular to the major corridors. A total of 239 ocean bottom hydrophone and seismometer deployments were successfully recovered. Shooting was conducted along 1020 nm of seismic profiles using a G-gun cluster of 64 l. Here, we present velocity models obtained by applying a tomographic approach which jointly inverts for refracted and reflected phases. Additional geometry and velocity information for the uppermost layers, obtained by prestack depth migration of multichannel seismic reflection data (see poster of Mueller et al. in this session), is incorporated into our models and held fixed during the iterations. geomar.de/index.php?id=sindbad

Detrital zircon U-Pb reconnaissance of the Franciscan subduction complex in northwestern California

USGS Publications Warehouse

Dimitru, Trevor; Ernst, W. Gary; Hourigan, Jeremy K.; McLaughlin, Robert J.

2015-01-01

In northwestern California, the Franciscan subduction complex has been subdivided into seven major tectonostratigraphic units. We report U-Pb ages of ≈2400 detrital zircon grains from 26 sandstone samples from 5 of these units. Here, we tabulate each unit's interpreted predominant sediment source areas and depositional age range, ordered from the oldest to the youngest unit. (1) Yolla Bolly terrane: nearby Sierra Nevada batholith (SNB); ca. 118 to 98 Ma. Rare fossils had indicated that this unit was mostly 151-137 Ma, but it is mostly much younger. (2) Central Belt: SND; ca. 103 too 53 Ma (but poorly constrained), again mostly younger than previously thought. (3) Yager terrane: distant Idaho batholith (IB); ca. 52 to 50 Ma. Much of the Yager's detritus was shed during major core complex extension and erosion in Idaho that started 53 Ma. An eocene Princeton River-Princeton submarine canyon system transported this detritus to the Great Valley forearc basin and thence to the Franciscan trench. (4) Coastal terrane: mostly IB, ±SNB, ±nearby Cascade arc, ±Nevada Cenozoic ignimbrite belt; 52 to <32 Ma. (5) King Range terrane: dominated by IB and SNB zircons; parts 16-14 Ma based on microfossils. Overall, some Franciscan units are younger than previously thought, making them more compatible with models for the growth of subduction complexes by positive accretion. From ca. 118 to 70 Ma, Franciscan sediments were sourced mainly from the nearby Sierra Nevada region and were isolated from southwestern US and Mexican sources. From 53 to 49 Ma, the Franciscan was sourced from both Idaho and the Sierra Nevada. By 37-32 Ma, input from Idaho had ceased. The influx from Idaho probably reflects major tectonism in Idaho, Oregon, and Washington, plus development of a through-going Princeton River to California, rather than radical changes in the subduction system at the Franciscan trench itself.

Tectono-sedimentary features in the Yap subduction zone, Western Pacific: constraints from latest integrated geophysical survey

NASA Astrophysics Data System (ADS)

Dong, D.; Zhang, G.; Bai, Y.; Fan, J.; Zhang, Z.

2017-12-01

The Yap subduction zone, western Pacific, is a typical structure related to the ridge subduction, but comparative shortage of the geophysical data makes the structural details unknown in this area. In this study, we present the latest and high-quality multi-beam swath bathymetry and multi-channel seismic data acquired synchronously in the year 2015 across the Yap subduction zone. Multichannel seismic and multi-beam data are mainly applied to investigate the topography of major tectonic units and stratigraphic structure in the Yap subduction zone and discuss the tectonic characteristics controlled by ridge subduction. It suggests that, Parece Vela Basin, as the regional sedimentary center, developed sedimentary layers nearly 800 meters thick. On the contrast, the horizontal sedimentary layers were not obviously identified in the Yap trench, where subduction erosion occurred. Caroline ridge changed the tectonic characteristics of subduction zone, and influenced magmatism of the Yap arc because of the special topography. The seismic profile clearly reveals landslide deposits at the upper slope break of the forearc, north of the Yap Island, which was identified as the fault notch denoting a lithological boundary in previous work. Detailed topography and geological structure of horst and graben in the north of Yap are depicted, and topographic high of Caroline ridge is supposed to bring greater bending and tension and the subsequent horst and graben belt. Multichannel seismic evidence has been provided for interpreting the expansion of Sorol Trough and its inferred age. A modified model for the Yap subduction zone evolution is proposed, incorporating three major tectonic events: proto-Yap Arc rupture in the Oligocene, collision of the Caroline Ridge and the Yap Trench in the Late Oligocene or Middle Miocene, and onset of the Sorol Trough rifting in the Late Miocene. Acknowledge: This study was supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (XDA11030102), the National Natural Science Foundation of China (No. 41476042, 41506055 )

Tertiary structural evolution of the Gangdese thrust system southeastern Tibet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yin, An; Harrison, M.; Ryerson, F.J.

1994-09-10

Structural and thermochronological investigations of southern Tibet (Xizang) suggest that intracontinental thrusting has been the dominant cause for formation of thickened crust in the southernmost Tibetan plateau since late Oligocene. Two thrust systems are documented in this study: the north dipping Gangdese system (GTS) and the younger south dipping Renbu-Zedong system (RZT). West of Lhasa, the Gangdese thrust juxtaposes the Late Cretaceous forearc basin deposits of the Lhasa Block (the Xigaze Group) over the Tethyan sedimentary rocks of the Indian plate, whereas east of Lhasa, the fault juxtaposes the Late Cretaceous-Eocene, Andean-type arc (the Gangdese batholith) over Tethyan sedimentary rocks.more » Near Zedong, 150 km southeast of Lhasa, the Gangdese thrust is marked by a >200-m-thick mylonitic shear zone that consists of deformed granite and metasedimentary rocks. A major south dipping backthrust in the hanging wall of the Gangdese thrust puts the Xigaze Group over Tertiary conglomerates and the Gangdese plutonics north of Xigaze and west of Lhasa. A lower age bound for the Gangdese thrust of 18.3{+-}0.5 Ma is given by crosscutting relationships. The timing of slip on the Gangdese thrust is estimate to be 27-23 Ma from {sup 40}Ar/{sup 39}Ar thermochronology, and a displacement of at least 46{+-}9 km is indicated near Zedong. The age of the Gangdese thrust (GT) is consistent with an upper age limit of {approximately}24 Ma for the initiation of movement on the Main Central thrust. In places, the younger Renbu-Zedong fault is thrust over the trace of the GT, obscuring its exposure. The RZT appears to have been active at circa 18 Ma but had ceased movement by 8{+-}1 Ma. The suture between India and Asia has been complexely modified by development of the GTS, RZT, and, locally, strike-slip and normal fault systems. 64 refs., 14 figs., 2 tabs.« less

Concentration of Natural Gas Hydrate Beneath the Permafrost Zone: Implications for Geochemical and Hydrologic Investigations

NASA Astrophysics Data System (ADS)

Uchida, T.; Waseda, A.; Namikawa, T.

2004-12-01

Gas hydrates are ice-like solids made of water molecules containing various gas molecules. The geological evaluations have suggested worldwide methane contents of gas hydrate beneath deep sea floors as well as permafrost-related zones to about twice the total reserves of conventional and unconventional hydrocarbon. Scientific and economic interests are increasing in gas hydrate as a new energy resource and a potential greenhouse gas. In 1998 and 2002 Mallik wells were drilled in the Canadian Arctic that clarified the characteristics of gas hydrate-dominant layers at depths from 890 to 1110 m beneath the permafrost zone. Continuous downhole well log data, anomalies of chloride contents in pore waters, core temperature depression as well as visible gas hydrates have confirmed the highly saturated pore-space hydrate as intergranular pore filling within sandy layers, whose saturations are higher than 70% in pore volume. Muddy sediments scarcely contain gas hydrate. The Nankai Trough runs along the Japanese Island, where forearc basins and accretionary prisms developed extensively and BSRs (bottom simulating reflectors) have been recognized widely. The METI Nankai Trough wells in 2000 also revealed the presence of pore-space hydrate filling intergranular pore of sandy layers. It is remarked that there are many similar features in appearance and characteristics between the Mallik and Nankai Trough areas with observations of well-interconnected and highly saturated pore-space hydrate. It is necessary for evaluating subsurface fluid flow behaviors to know both porosity and permeability of gas hydrate-bearing sandy sediments, and measurements of water permeability for them indicate that highly saturated sands may have permeability of a few millidarcies. Subsequent analyses in sedimentology and geochemistry performed on gas hydrate-bearing sands revealed important geologic and sedimentologic controls on the formation and concentration of gas hydrate. It is suggested that the distribution of a porous and coarser-grained sandy sediments is one of the most important factors to control the occurrence of gas hydrates, as well as physicochemical conditions.

Contribution of Methane Accumulation and Pore Water Flow to Forming High Concentration of Gas Hydrate in Sandy Sediments

NASA Astrophysics Data System (ADS)

Uchida, T.; Waseda, A.; Fujii, T.

2006-12-01

The geological and geophysical evaluations have suggested worldwide methane contents in gas hydrate beneath deep sea floors as well as permafrost-related zones to about twice the total reserves of conventional and unconventional hydrocarbon. In 1998 and 2002 Mallik wells were drilled in the Canadian Arctic that clarified the characteristics of gas hydrate-concentrated sandy layers at depths from 890 to 1110 m beneath the permafrost zone. Continuous downhole well log data, anomalies of chloride contents in pore waters, core temperature depression as well as visible gas hydrates have confirmed the highly saturated pore-space hydrate as intergranular pore filling, whose saturations are evaluated higher than 80 percent in pore volume. In the Nankai Trough forearc basins and accretionary prisms developed and BSRs (bottom simulating reflectors) have been recognized widely, where the multiple wells were drilled in 2000 and 2004, and revealed the presence of pore-space hydrate in sandy layers. It is remarked that there are many similar features in appearance and characteristics between the Mallik and Nankai Trough areas with observations of well- interconnected and highly saturated pore-space hydrate. High concentration of gas hydrate may need original pore space large enough to occur within a host sandy sediment, and this appears to be a similar mode for conventional petroleum accumulations. The distribution of a porous and coarser-grained sandy sediments should be one of the most important factors controlling occurrences and distributions of gas hydrate, as well as physicochemical conditions. Supplying methane for forming deep marine gas hydrate is commonly attributed to microbial conversion of organic material within the zone of stability or to migration of methane-containing fluids from a deeper source area. Pore water flows are considered to a macroscopic migration through faults/fractures and a microscopic flow in intergranular pore systems of sediment. We should assess the influence of methane supply on observable features of hydrate occurrences.

Late Miocene uplift in the Romagnan Apennines and the detachment of subducted lithosphere

NASA Astrophysics Data System (ADS)

van der Meulen, M. J.; Kouwenhoven, T. J.; van der Zwaan, G. J.; Meulenkamp, J. E.; Wortel, M. J. R.

1999-12-01

We report part of a test of the hypothesis that detachment of subducted lithosphere may be a process of lateral propagation of a horizontal tear [Wortel and Spakman, Proc. Kon. Ned. Akad. Wetensch., 95 (1992) 325-347]. We have used the Apennines as a test area. The test procedure consists of the comparison of hypothetical vertical motions, predicted from the expected redistribution of slab pull forces, with observed vertical motions. We demonstrate that a Late Miocene depocentre migration from the Northern towards the Central Apennines is associated with uplift of (the fore-arc of) the Northern Apennines. Such a combination of a depocentre shift and uplift is thought to be diagnostic for lateral migration of slab detachment. The depocentre migration was identified in earlier work [van der Meulen et al., Earth Planet. Sci. Lett., 154 (1998) 203-219]. This contribution focuses on uplift, which has primarily been identified through the geohistory analysis of the Monte del Casino Section (Romagnan Apennines, Northern Italy). Owing to methodological problems, the start and duration of the uplift phase could not be constrained, and only a minimum estimate of the total amount of uplift (483±180 m) is obtained. The data do allow for an estimate of the uplift rate: 163±61 cm/ky. A review of regional data results in better constraints on the timing of the above lateral reorganisation of the fore-arc, and on the spatial extent of the uplifted area. Depocentre development in the Central Apennines began between 8.6 and 8.3 Ma B.P. Uplift started between 9 and 8 Ma B.P., and affected the entire northernmost Apennines.