Essentials of forensic post-mortem MR imaging in adults

PubMed Central

Ruder, T D; Thali, M J; Hatch, G M

2014-01-01

Post-mortem MR (PMMR) imaging is a powerful diagnostic tool with a wide scope in forensic radiology. In the past 20 years, PMMR has been used as both an adjunct and an alternative to autopsy. The role of PMMR in forensic death investigations largely depends on the rules and habits of local jurisdictions, availability of experts, financial resources, and individual case circumstances. PMMR images are affected by post-mortem changes, including position-dependent sedimentation, variable body temperature and decomposition. Investigators must be familiar with the appearance of normal findings on PMMR to distinguish them from disease or injury. Coronal whole-body images provide a comprehensive overview. Notably, short tau inversion–recovery (STIR) images enable investigators to screen for pathological fluid accumulation, to which we refer as “forensic sentinel sign”. If scan time is short, subsequent PMMR imaging may be focussed on regions with a positive forensic sentinel sign. PMMR offers excellent anatomical detail and is especially useful to visualize pathologies of the brain, heart, subcutaneous fat tissue and abdominal organs. PMMR may also be used to document skeletal injury. Cardiovascular imaging is a core area of PMMR imaging and growing evidence indicates that PMMR is able to detect ischaemic injury at an earlier stage than traditional autopsy and routine histology. The aim of this review is to present an overview of normal findings on forensic PMMR, provide general advice on the application of PMMR and summarise the current literature on PMMR imaging of the head and neck, cardiovascular system, abdomen and musculoskeletal system. PMID:24191122

Computer-assisted virtual autopsy using surgical navigation techniques.

PubMed

Ebert, Lars Christian; Ruder, Thomas D; Martinez, Rosa Maria; Flach, Patricia M; Schweitzer, Wolf; Thali, Michael J; Ampanozi, Garyfalia

2015-01-01

OBJECTIVE; Virtual autopsy methods, such as postmortem CT and MRI, are increasingly being used in forensic medicine. Forensic investigators with little to no training in diagnostic radiology and medical laypeople such as state's attorneys often find it difficult to understand the anatomic orientation of axial postmortem CT images. We present a computer-assisted system that permits postmortem CT datasets to be quickly and intuitively resliced in real time at the body to narrow the gap between radiologic imaging and autopsy. Our system is a potentially valuable tool for planning autopsies, showing findings to medical laypeople, and teaching CT anatomy, thus further closing the gap between radiology and forensic pathology.

Image processing and 3D visualization in forensic pathologic examination

NASA Astrophysics Data System (ADS)

Oliver, William R.; Altschuler, Bruce R.

1996-02-01

The use of image processing is becoming increasingly important in the evaluation of violent crime. While much work has been done in the use of these techniques for forensic purposes outside of forensic pathology, its use in the pathologic examination of wounding has been limited. We are investigating the use of image processing and three-dimensional visualization in the analysis of patterned injuries and tissue damage. While image processing will never replace classical understanding and interpretation of how injuries develop and evolve, it can be a useful tool in helping an observer notice features in an image, may help provide correlation of surface to deep tissue injury, and provide a mechanism for the development of a metric for analyzing how likely it may be that a given object may have caused a given wound. We are also exploring methods of acquiring three-dimensional data for such measurements, which is the subject of a second paper.

Wide-field time-resolved luminescence imaging and spectroscopy to decipher obliterated documents in forensic science

NASA Astrophysics Data System (ADS)

Suzuki, Mototsugu; Akiba, Norimitsu; Kurosawa, Kenji; Kuroki, Kenro; Akao, Yoshinori; Higashikawa, Yoshiyasu

2016-01-01

We applied a wide-field time-resolved luminescence (TRL) method with a pulsed laser and a gated intensified charge coupled device (ICCD) for deciphering obliterated documents for use in forensic science. The TRL method can nondestructively measure the dynamics of luminescence, including fluorescence and phosphorescence lifetimes, which prove to be useful parameters for image detection. First, we measured the TRL spectra of four brands of black porous-tip pen inks on paper to estimate their luminescence lifetimes. Next, we acquired the TRL images of 12 obliterated documents at various delay times and gate times of the ICCD. The obliterated contents were revealed in the TRL images because of the difference in the luminescence lifetimes of the inks. This method requires no pretreatment, is nondestructive, and has the advantage of wide-field imaging, which makes it is easy to control the gate timing. This demonstration proves that TRL imaging and spectroscopy are powerful tools for forensic document examination.

Cell phone camera ballistics: attacks and countermeasures

NASA Astrophysics Data System (ADS)

Steinebach, Martin; Liu, Huajian; Fan, Peishuai; Katzenbeisser, Stefan

2010-01-01

Multimedia forensics deals with the analysis of multimedia data to gather information on its origin and authenticity. One therefore needs to distinguish classical criminal forensics (which today also uses multimedia data as evidence) and multimedia forensics where the actual case is based on a media file. One example for the latter is camera forensics where pixel error patters are used as fingerprints identifying a camera as the source of an image. Of course multimedia forensics can become a tool for criminal forensics when evidence used in a criminal investigation is likely to be manipulated. At this point an important question arises: How reliable are these algorithms? Can a judge trust their results? How easy are they to manipulate? In this work we show how camera forensics can be attacked and introduce a potential countermeasure against these attacks.

Application of forensic image analysis in accident investigations.

PubMed

Verolme, Ellen; Mieremet, Arjan

2017-09-01

Forensic investigations are primarily meant to obtain objective answers that can be used for criminal prosecution. Accident analyses are usually performed to learn from incidents and to prevent similar events from occurring in the future. Although the primary goal may be different, the steps in which information is gathered, interpreted and weighed are similar in both types of investigations, implying that forensic techniques can be of use in accident investigations as well. The use in accident investigations usually means that more information can be obtained from the available information than when used in criminal investigations, since the latter require a higher evidence level. In this paper, we demonstrate the applicability of forensic techniques for accident investigations by presenting a number of cases from one specific field of expertise: image analysis. With the rapid spread of digital devices and new media, a wealth of image material and other digital information has become available for accident investigators. We show that much information can be distilled from footage by using forensic image analysis techniques. These applications show that image analysis provides information that is crucial for obtaining the sequence of events and the two- and three-dimensional geometry of an accident. Since accident investigation focuses primarily on learning from accidents and prevention of future accidents, and less on the blame that is crucial for criminal investigations, the field of application of these forensic tools may be broader than would be the case in purely legal sense. This is an important notion for future accident investigations. Copyright © 2017 Elsevier B.V. All rights reserved.

Correcting the planar perspective projection in geometric structures applied to forensic facial analysis.

PubMed

Baldasso, Rosane Pérez; Tinoco, Rachel Lima Ribeiro; Vieira, Cristina Saft Matos; Fernandes, Mário Marques; Oliveira, Rogério Nogueira

2016-10-01

The process of forensic facial analysis may be founded on several scientific techniques and imaging modalities, such as digital signal processing, photogrammetry and craniofacial anthropometry. However, one of the main limitations in this analysis is the comparison of images acquired with different angles of incidence. The present study aimed to explore a potential approach for the correction of the planar perspective projection (PPP) in geometric structures traced from the human face. A technique for the correction of the PPP was calibrated within photographs of two geometric structures obtained with angles of incidence distorted in 80°, 60° and 45°. The technique was performed using ImageJ ® 1.46r (National Institutes of Health, Bethesda, Maryland). The corrected images were compared with photographs of the same object obtained in 90° (reference). In a second step, the technique was validated in a digital human face created using MakeHuman ® 1.0.2 (Free Software Foundation, Massachusetts, EUA) and Blender ® 2.75 (Blender ® Foundation, Amsterdam, Nederland) software packages. The images registered with angular distortion presented a gradual decrease in height when compared to the reference. The digital technique for the correction of the PPP is a valuable tool for forensic applications using photographic imaging modalities, such as forensic facial analysis. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Virtopsy - the concept of a centralized database in forensic medicine for analysis and comparison of radiological and autopsy data.

PubMed

Aghayev, Emin; Staub, Lukas; Dirnhofer, Richard; Ambrose, Tony; Jackowski, Christian; Yen, Kathrin; Bolliger, Stephan; Christe, Andreas; Roeder, Christoph; Aebi, Max; Thali, Michael J

2008-04-01

Recent developments in clinical radiology have resulted in additional developments in the field of forensic radiology. After implementation of cross-sectional radiology and optical surface documentation in forensic medicine, difficulties in the validation and analysis of the acquired data was experienced. To address this problem and for the comparison of autopsy and radiological data a centralized database with internet technology for forensic cases was created. The main goals of the database are (1) creation of a digital and standardized documentation tool for forensic-radiological and pathological findings; (2) establishing a basis for validation of forensic cross-sectional radiology as a non-invasive examination method in forensic medicine that means comparing and evaluating the radiological and autopsy data and analyzing the accuracy of such data; and (3) providing a conduit for continuing research and education in forensic medicine. Considering the infrequent availability of CT or MRI for forensic institutions and the heterogeneous nature of case material in forensic medicine an evaluation of benefits and limitations of cross-sectional imaging concerning certain forensic features by a single institution may be of limited value. A centralized database permitting international forensic and cross disciplinary collaborations may provide important support for forensic-radiological casework and research.

An Android Communication App Forensic Taxonomy.

PubMed

Azfar, Abdullah; Choo, Kim-Kwang Raymond; Liu, Lin

2016-09-01

Due to the popularity of Android devices and applications (apps), Android forensics is one of the most studied topics within mobile forensics. Communication apps, such as instant messaging and Voice over IP (VoIP), are one popular app category used by mobile device users, including criminals. Therefore, a taxonomy outlining artifacts of forensic interest involving the use of Android communication apps will facilitate the timely collection and analysis of evidentiary materials from such apps. In this paper, 30 popular Android communication apps were examined, where a logical extraction of the Android phone images was collected using XRY, a widely used mobile forensic tool. Various information of forensic interest, such as contact lists and chronology of messages, was recovered. Based on the findings, a two-dimensional taxonomy of the forensic artifacts of the communication apps is proposed, with the app categories in one dimension and the classes of artifacts in the other dimension. Finally, the artifacts identified in the study of the 30 communication apps are summarized using the taxonomy. It is expected that the proposed taxonomy and the forensic findings in this paper will assist forensic investigations involving Android communication apps. © 2016 American Academy of Forensic Sciences.

Fimag: the United Kingdom disaster victim/forensic identification imaging system.

PubMed

Rutty, Guy N; Robinson, Claire; Morgan, Bruno; Black, Sue; Adams, Catherine; Webster, Philip

2009-11-01

Imaging is an integral diagnostic tool in mass fatality investigations undertaken traditionally by plain X-rays, fluoroscopy, and dental radiography. However, little attention has been given to appropriate image reporting, secure data transfer and storage particularly in relation to the need to meet stringent judicial requirements. Notwithstanding these limitations, it is the risk associated with the safe handling and investigation of contaminated fatalities which is providing new challenges for mass fatality radiological imaging. Mobile multi-slice computed tomography is an alternative to these traditional modalities as it provides a greater diagnostic yield and an opportunity to address the requirements of the criminal justice system. We present a new national disaster victim/forensic identification imaging system--Fimag--which is applicable for both contaminated and non-contaminated mass fatality imaging and addresses the issues of judicial reporting. We suggest this system opens a new era in radiological diagnostics for mass fatalities.

Forensic 3D Scene Reconstruction

DOE Office of Scientific and Technical Information (OSTI.GOV)

LITTLE,CHARLES Q.; PETERS,RALPH R.; RIGDON,J. BRIAN

Traditionally law enforcement agencies have relied on basic measurement and imaging tools, such as tape measures and cameras, in recording a crime scene. A disadvantage of these methods is that they are slow and cumbersome. The development of a portable system that can rapidly record a crime scene with current camera imaging, 3D geometric surface maps, and contribute quantitative measurements such as accurate relative positioning of crime scene objects, would be an asset to law enforcement agents in collecting and recording significant forensic data. The purpose of this project is to develop a feasible prototype of a fast, accurate, 3Dmore » measurement and imaging system that would support law enforcement agents to quickly document and accurately record a crime scene.« less

3D-MSCT imaging of bullet trajectory in 3D crime scene reconstruction: two case reports.

PubMed

Colard, T; Delannoy, Y; Bresson, F; Marechal, C; Raul, J S; Hedouin, V

2013-11-01

Postmortem investigations are increasingly assisted by three-dimensional multi-slice computed tomography (3D-MSCT) and have become more available to forensic pathologists over the past 20years. In cases of ballistic wounds, 3D-MSCT can provide an accurate description of the bullet location, bone fractures and, more interestingly, a clear visual of the intracorporeal trajectory (bullet track). These forensic medical examinations can be combined with tridimensional bullet trajectory reconstructions created by forensic ballistic experts. These case reports present the implementation of tridimensional methods and the results of 3D crime scene reconstruction in two cases. The authors highlight the value of collaborations between police forensic experts and forensic medicine institutes through the incorporation of 3D-MSCT data in a crime scene reconstruction, which is of great interest in forensic science as a clear visual communication tool between experts and the court. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Forensic imaging tools for law enforcement

DOE Office of Scientific and Technical Information (OSTI.GOV)

SMITHPETER,COLIN L.; SANDISON,DAVID R.; VARGO,TIMOTHY D.

2000-01-01

Conventional methods of gathering forensic evidence at crime scenes are encumbered by difficulties that limit local law enforcement efforts to apprehend offenders and bring them to justice. Working with a local law-enforcement agency, Sandia National Laboratories has developed a prototype multispectral imaging system that can speed up the investigative search task and provide additional and more accurate evidence. The system, called the Criminalistics Light-imaging Unit (CLU), has demonstrated the capabilities of locating fluorescing evidence at crime scenes under normal lighting conditions and of imaging other types of evidence, such as untreated fingerprints, by direct white-light reflectance. CLU employs state ofmore » the art technology that provides for viewing and recording of the entire search process on videotape. This report describes the work performed by Sandia to design, build, evaluate, and commercialize CLU.« less

Analysis towards VMEM File of a Suspended Virtual Machine

NASA Astrophysics Data System (ADS)

Song, Zheng; Jin, Bo; Sun, Yongqing

With the popularity of virtual machines, forensic investigators are challenged with more complicated situations, among which discovering the evidences in virtualized environment is of significant importance. This paper mainly analyzes the file suffixed with .vmem in VMware Workstation, which stores all pseudo-physical memory into an image. The internal file structure of .vmem file is studied and disclosed. Key information about processes and threads of a suspended virtual machine is revealed. Further investigation into the Windows XP SP3 heap contents is conducted and a proof-of-concept tool is provided. Different methods to obtain forensic memory images are introduced, with both advantages and limits analyzed. We conclude with an outlook.

Three-dimensional image technology in forensic anthropology: Assessing the validity of biological profiles derived from CT-3D images of the skeleton

NASA Astrophysics Data System (ADS)

Garcia de Leon Valenzuela, Maria Julia

This project explores the reliability of building a biological profile for an unknown individual based on three-dimensional (3D) images of the individual's skeleton. 3D imaging technology has been widely researched for medical and engineering applications, and it is increasingly being used as a tool for anthropological inquiry. While the question of whether a biological profile can be derived from 3D images of a skeleton with the same accuracy as achieved when using dry bones has been explored, bigger sample sizes, a standardized scanning protocol and more interobserver error data are needed before 3D methods can become widely and confidently used in forensic anthropology. 3D images of Computed Tomography (CT) scans were obtained from 130 innominate bones from Boston University's skeletal collection (School of Medicine). For each bone, both 3D images and original bones were assessed using the Phenice and Suchey-Brooks methods. Statistical analysis was used to determine the agreement between 3D image assessment versus traditional assessment. A pool of six individuals with varying experience in the field of forensic anthropology scored a subsample (n = 20) to explore interobserver error. While a high agreement was found for age and sex estimation for specimens scored by the author, the interobserver study shows that observers found it difficult to apply standard methods to 3D images. Higher levels of experience did not result in higher agreement between observers, as would be expected. Thus, a need for training in 3D visualization before applying anthropological methods to 3D bones is suggested. Future research should explore interobserver error using a larger sample size in order to test the hypothesis that training in 3D visualization will result in a higher agreement between scores. The need for the development of a standard scanning protocol focusing on the optimization of 3D image resolution is highlighted. Applications for this research include the possibility of digitizing skeletal collections in order to expand their use and for deriving skeletal collections from living populations and creating population-specific standards. Further research for the development of a standard scanning and processing protocol is needed before 3D methods in forensic anthropology are considered as reliable tools for generating biological profiles.

Times have changed! Forensic radiology--a new challenge for radiology and forensic pathology.

PubMed

Flach, Patricia M; Thali, Michael J; Germerott, Tanja

2014-04-01

The ongoing development of imaging and the recent integration of cross-sectional imaging methods into the medicolegal workflow have resulted in an increasing number of forensic institutes acquiring dedicated CT and MRI scanners. The purpose of this article is to evaluate the different aspects of postmortem imaging and to detail the necessary cooperation between radiologists and forensic pathologists for mutual learning and accurate science to form a new subspecialty: forensic radiology. CONCLUSION; Forensic radiology must integrate the expertise of forensic pathologists and radiologists. The challenge is to unite these two disciplines first by direct and intense communications and second by a basic understanding of forensic pathology by radiologists as well as a foundational knowledge of postmortem imaging by forensic pathologists, in combination with the establishment of educational and reporting guidelines.

Facial soft biometric features for forensic face recognition.

PubMed

Tome, Pedro; Vera-Rodriguez, Ruben; Fierrez, Julian; Ortega-Garcia, Javier

2015-12-01

This paper proposes a functional feature-based approach useful for real forensic caseworks, based on the shape, orientation and size of facial traits, which can be considered as a soft biometric approach. The motivation of this work is to provide a set of facial features, which can be understood by non-experts such as judges and support the work of forensic examiners who, in practice, carry out a thorough manual comparison of face images paying special attention to the similarities and differences in shape and size of various facial traits. This new approach constitutes a tool that automatically converts a set of facial landmarks to a set of features (shape and size) corresponding to facial regions of forensic value. These features are furthermore evaluated in a population to generate statistics to support forensic examiners. The proposed features can also be used as additional information that can improve the performance of traditional face recognition systems. These features follow the forensic methodology and are obtained in a continuous and discrete manner from raw images. A statistical analysis is also carried out to study the stability, discrimination power and correlation of the proposed facial features on two realistic databases: MORPH and ATVS Forensic DB. Finally, the performance of both continuous and discrete features is analyzed using different similarity measures. Experimental results show high discrimination power and good recognition performance, especially for continuous features. A final fusion of the best systems configurations achieves rank 10 match results of 100% for ATVS database and 75% for MORPH database demonstrating the benefits of using this information in practice. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

[True color accuracy in digital forensic photography].

PubMed

Ramsthaler, Frank; Birngruber, Christoph G; Kröll, Ann-Katrin; Kettner, Mattias; Verhoff, Marcel A

2016-01-01

Forensic photographs not only need to be unaltered and authentic and capture context-relevant images, along with certain minimum requirements for image sharpness and information density, but color accuracy also plays an important role, for instance, in the assessment of injuries or taphonomic stages, or in the identification and evaluation of traces from photos. The perception of color not only varies subjectively from person to person, but as a discrete property of an image, color in digital photos is also to a considerable extent influenced by technical factors such as lighting, acquisition settings, camera, and output medium (print, monitor). For these reasons, consistent color accuracy has so far been limited in digital photography. Because images usually contain a wealth of color information, especially for complex or composite colors or shades of color, and the wavelength-dependent sensitivity to factors such as light and shadow may vary between cameras, the usefulness of issuing general recommendations for camera capture settings is limited. Our results indicate that true image colors can best and most realistically be captured with the SpyderCheckr technical calibration tool for digital cameras tested in this study. Apart from aspects such as the simplicity and quickness of the calibration procedure, a further advantage of the tool is that the results are independent of the camera used and can also be used for the color management of output devices such as monitors and printers. The SpyderCheckr color-code patches allow true colors to be captured more realistically than with a manual white balance tool or an automatic flash. We therefore recommend that the use of a color management tool should be considered for the acquisition of all images that demand high true color accuracy (in particular in the setting of injury documentation).

Laryngeal teflonoma identified by Fourier-transform infrared microspectroscopy after forensic autopsy: an interesting tool for foreign material identification in forensic cases.

PubMed

Duband, Sébastien; Govin, Alexandre; Dumollard, Jean-Marc; Forest, Fabien; Basset, Thierry; Péoc'h, Michel

2012-01-10

Forensic pathologists are sometimes confronted with microscopic foreign bodies mixed in with soft tissues surrounding wounds and which are thus difficult to identify. This identification, however, could be primordial in investigating a crime and in determining the weapon used. A case of a fatal respiratory distress syndrome due to conjoining suicidal drug intoxication and laryngeal obstruction by a voluminous foreign body giant cell granuloma is presented. The classical histological examination showed exogenous particles in the vocal cord tumor with birefringent qualities. Their analysis with Fourier-Transform infrared (FTIR) spectrometry coupled with infrared microscope allows the determination of their chemical nature as polytetrafluoroethylene and to the diagnosis of teflonoma. This case report put the emphasis on the forensic interest of the FTIR imaging. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Joint forensics and watermarking approach for video authentication

NASA Astrophysics Data System (ADS)

Thiemert, Stefan; Liu, Huajian; Steinebach, Martin; Croce-Ferri, Lucilla

2007-02-01

In our paper we discuss and compare the possibilities and shortcomings of both content-fragile watermarking and digital forensics and analyze if the combination of both techniques allows the identification of more than the sum of all manipulations identified by both techniques on their own due to synergetic effects. The first part of the paper discusses the theoretical possibilities offered by a combined approach, in which forensics and watermarking are considered as complementary tools for data authentication or deeply combined together, in order to reduce their error rate and to enhance the detection efficiency. After this conceptual discussion the paper proposes some concrete examples in which the joint approach is applied to video authentication. Some specific forensics techniques are analyzed and expanded to handle efficiently video data. The examples show possible extensions of passive-blind image forgery detection to video data, where the motion and time related characteristics of video are efficiently exploited.

Into the decomposed body-forensic digital autopsy using multislice-computed tomography.

PubMed

Thali, M J; Yen, K; Schweitzer, W; Vock, P; Ozdoba, C; Dirnhofer, R

2003-07-08

It is impossible to obtain a representative anatomical documentation of an entire body using classical X-ray methods, they subsume three-dimensional bodies into a two-dimensional level. We used the novel multislice-computed tomography (MSCT) technique in order to evaluate a case of homicide with putrefaction of the corpse before performing a classical forensic autopsy. This non-invasive method showed gaseous distension of the decomposing organs and tissues in detail as well as a complex fracture of the calvarium. MSCT also proved useful in screening for foreign matter in decomposing bodies, and full-body scanning took only a few minutes. In conclusion, we believe postmortem MSCT imaging is an excellent vizualisation tool with great potential for forensic documentation and evaluation of decomposed bodies.

Forensic Evidence and Criminal Investigations: The Impact of Ballistics Information on the Investigation of Violent Crime in Nine Cities.

PubMed

King, William R; Campbell, Bradley A; Matusiak, Matthew C; Katz, Charles M

2017-07-01

We explore the impact of information from ballistics imaging hit reports on the investigation into violent crimes. Ballistics imaging hits link two crimes involving the same firearm by forensically matching tool marks on the fired bullets or cartridge cases. Interview data collected from detectives who received a hit report were used to explore the relationship between the presence of a hit report and outcomes in 65 gun-related violent crime investigations in nine U.S. police agencies. Findings indicate hit reports rarely contribute to identification, arrest, charging, or sentencing of suspects, because of delays in producing hit reports. On average, hit reports were completed 181.4 days after the focal crime. This delay forces investigations to proceed without the benefit of information from ballistics analysis. Additionally, hit reports rarely contained detailed information that was immediately useful to investigators. Instead, hit reports required additional research by the investigator to unlock useful information. © 2017 American Academy of Forensic Sciences.

Stereolithography: a potential new tool in forensic medicine.

PubMed

Dolz, M S; Cina, S J; Smith, R

2000-06-01

Stereolithography is a computer-mediated method that can be used to quickly create anatomically correct three-dimensional epoxy and acrylic resin models from various types of medical data. Multiple imaging modalities can be exploited, including computed tomography and magnetic resonance imaging. The technology was first developed and used in 1986 to overcome limitations in previous computer-aided manufacturing/milling techniques. Stereolithography is presently used to accurately reproduce both the external and internal anatomy of body structures. Current medical uses of stereolithography include preoperative planning of orthopedic and maxillofacial surgeries, the fabrication of custom prosthetic devices; and the assessment of the degree of bony and soft-tissue injury caused by trauma. We propose that there is a useful, as yet untapped, potential for this technology in forensic medicine.

Uses of software in digital image analysis: a forensic report

NASA Astrophysics Data System (ADS)

Sharma, Mukesh; Jha, Shailendra

2010-02-01

Forensic image analysis is required an expertise to interpret the content of an image or the image itself in legal matters. Major sub-disciplines of forensic image analysis with law enforcement applications include photo-grammetry, photographic comparison, content analysis and image authentication. It has wide applications in forensic science range from documenting crime scenes to enhancing faint or indistinct patterns such as partial fingerprints. The process of forensic image analysis can involve several different tasks, regardless of the type of image analysis performed. Through this paper authors have tried to explain these tasks, which are described in to three categories: Image Compression, Image Enhancement & Restoration and Measurement Extraction. With the help of examples like signature comparison, counterfeit currency comparison and foot-wear sole impression using the software Canvas and Corel Draw.

[The application of radiological image in forensic medicine].

PubMed

Zhang, Ji-Zong; Che, Hong-Min; Xu, Li-Xiang

2006-04-01

Personal identification is an important work in forensic investigation included sex discrimination, age and stature estimation. Human identification depended on radiological image technique analysis is a practice and proper method in forensic science field. This paper intended to understand the advantage and defect by reviewed the employing of forensic radiology in forensic science field broadly and provide a reference to perfect the application of forensic radiology in forensic science field.

Anti-forensics of chromatic aberration

NASA Astrophysics Data System (ADS)

Mayer, Owen; Stamm, Matthew C.

2015-03-01

Over the past decade, a number of information forensic techniques have been developed to identify digital image manipulation and falsification. Recent research has shown, however, that an intelligent forger can use anti-forensic countermeasures to disguise their forgeries. In this paper, an anti-forensic technique is proposed to falsify the lateral chromatic aberration present in a digital image. Lateral chromatic aberration corresponds to the relative contraction or expansion between an image's color channels that occurs due to a lens's inability to focus all wavelengths of light on the same point. Previous work has used localized inconsistencies in an image's chromatic aberration to expose cut-and-paste image forgeries. The anti-forensic technique presented in this paper operates by estimating the expected lateral chromatic aberration at an image location, then removing deviations from this estimate caused by tampering or falsification. Experimental results are presented that demonstrate that our anti-forensic technique can be used to effectively disguise evidence of an image forgery.

Environmental impact to multimedia systems on the example of fingerprint aging behavior at crime scenes

NASA Astrophysics Data System (ADS)

Merkel, Ronny; Breuhan, Andy; Hildebrandt, Mario; Vielhauer, Claus; Bräutigam, Anja

2012-06-01

In the field of crime scene forensics, current methods of evidence collection, such as the acquisition of shoe-marks, tireimpressions, palm-prints or fingerprints are in most cases still performed in an analogue way. For example, fingerprints are captured by powdering and sticky tape lifting, ninhydrine bathing or cyanoacrylate fuming and subsequent photographing. Images of the evidence are then further processed by forensic experts. With the upcoming use of new multimedia systems for the digital capturing and processing of crime scene traces in forensics, higher resolutions can be achieved, leading to a much better quality of forensic images. Furthermore, the fast and mostly automated preprocessing of such data using digital signal processing techniques is an emerging field. Also, by the optical and non-destructive lifting of forensic evidence, traces are not destroyed and therefore can be re-captured, e.g. by creating time series of a trace, to extract its aging behavior and maybe determine the time the trace was left. However, such new methods and tools face different challenges, which need to be addressed before a practical application in the field. Based on the example of fingerprint age determination, which is an unresolved research challenge to forensic experts since decades, we evaluate the influences of different environmental conditions as well as different types of sweating and their implications to the capturing sensory, preprocessing methods and feature extraction. We use a Chromatic White Light (CWL) sensor to exemplary represent such a new optical and contactless measurement device and investigate the influence of 16 different environmental conditions, 8 different sweat types and 11 different preprocessing methods on the aging behavior of 48 fingerprint time series (2592 fingerprint scans in total). We show the challenges that arise for such new multimedia systems capturing and processing forensic evidence

Automatic detection of hemorrhagic pericardial effusion on PMCT using deep learning - a feasibility study.

PubMed

Ebert, Lars C; Heimer, Jakob; Schweitzer, Wolf; Sieberth, Till; Leipner, Anja; Thali, Michael; Ampanozi, Garyfalia

2017-12-01

Post mortem computed tomography (PMCT) can be used as a triage tool to better identify cases with a possibly non-natural cause of death, especially when high caseloads make it impossible to perform autopsies on all cases. Substantial data can be generated by modern medical scanners, especially in a forensic setting where the entire body is documented at high resolution. A solution for the resulting issues could be the use of deep learning techniques for automatic analysis of radiological images. In this article, we wanted to test the feasibility of such methods for forensic imaging by hypothesizing that deep learning methods can detect and segment a hemopericardium in PMCT. For deep learning image analysis software, we used the ViDi Suite 2.0. We retrospectively selected 28 cases with, and 24 cases without, hemopericardium. Based on these data, we trained two separate deep learning networks. The first one classified images into hemopericardium/not hemopericardium, and the second one segmented the blood content. We randomly selected 50% of the data for training and 50% for validation. This process was repeated 20 times. The best performing classification network classified all cases of hemopericardium from the validation images correctly with only a few false positives. The best performing segmentation network would tend to underestimate the amount of blood in the pericardium, which is the case for most networks. This is the first study that shows that deep learning has potential for automated image analysis of radiological images in forensic medicine.

[Applicability of non-invasive imaging methods in forensic medicine and forensic anthropology in particular].

PubMed

Marcinková, Mária; Straka, Ľubomír; Novomeský, František; Janík, Martin; Štuller, František; Krajčovič, Jozef

2018-01-01

Massive progress in developing even more precise imaging modalities influenced all medical branches including the forensic medicine. In forensic anthropology, an inevitable part of forensic medicine itself, the use of all imaging modalities becomes even more important. Despite of acquiring more accurate informations about the deceased, all of them can be used in the process of identification and/or age estimation. X - ray imaging is most commonly used in detecting foreign bodies or various pathological changes of the deceased. Computed tomography, on the other hand, can be very helpful in the process of identification, whereas outcomes of this examination can be used for virtual reconstruction of living objects. Magnetic resonance imaging offers new opportunities in detecting cardiovascular pathological processes or develompental anomalies. Ultrasonography provides promising results in age estimation of living subjects without excessive doses of radiation. Processing the latest information sources available, authors introduce the application examples of X - ray imaging, computed tomography, magnetic resonance imaging and ultrasonography in everyday forensic medicine routine, with particular focusing on forensic anthropology.

Haptics in forensics: the possibilities and advantages in using the haptic device for reconstruction approaches in forensic science.

PubMed

Buck, Ursula; Naether, Silvio; Braun, Marcel; Thali, Michael

2008-09-18

Non-invasive documentation methods such as surface scanning and radiological imaging are gaining in importance in the forensic field. These three-dimensional technologies provide digital 3D data, which are processed and handled in the computer. However, the sense of touch gets lost using the virtual approach. The haptic device enables the use of the sense of touch to handle and feel digital 3D data. The multifunctional application of a haptic device for forensic approaches is evaluated and illustrated in three different cases: the representation of bone fractures of the lower extremities, by traffic accidents, in a non-invasive manner; the comparison of bone injuries with the presumed injury-inflicting instrument; and in a gunshot case, the identification of the gun by the muzzle imprint, and the reconstruction of the holding position of the gun. The 3D models of the bones are generated from the Computed Tomography (CT) images. The 3D models of the exterior injuries, the injury-inflicting tools and the bone injuries, where a higher resolution is necessary, are created by the optical surface scan. The haptic device is used in combination with the software FreeForm Modelling Plus for touching the surface of the 3D models to feel the minute injuries and the surface of tools, to reposition displaced bone parts and to compare an injury-causing instrument with an injury. The repositioning of 3D models in a reconstruction is easier, faster and more precisely executed by means of using the sense of touch and with the user-friendly movement in the 3D space. For representation purposes, the fracture lines of bones are coloured. This work demonstrates that the haptic device is a suitable and efficient application in forensic science. The haptic device offers a new way in the handling of digital data in the virtual 3D space.

Image processing in forensic pathology.

PubMed

Oliver, W R

1998-03-01

Image processing applications in forensic pathology are becoming increasingly important. This article introduces basic concepts in image processing as applied to problems in forensic pathology in a non-mathematical context. Discussions of contrast enhancement, digital encoding, compression, deblurring, and other topics are presented.

Infrared imaging of the crime scene: possibilities and pitfalls.

PubMed

Edelman, Gerda J; Hoveling, Richelle J M; Roos, Martin; van Leeuwen, Ton G; Aalders, Maurice C G

2013-09-01

All objects radiate infrared energy invisible to the human eye, which can be imaged by infrared cameras, visualizing differences in temperature and/or emissivity of objects. Infrared imaging is an emerging technique for forensic investigators. The rapid, nondestructive, and noncontact features of infrared imaging indicate its suitability for many forensic applications, ranging from the estimation of time of death to the detection of blood stains on dark backgrounds. This paper provides an overview of the principles and instrumentation involved in infrared imaging. Difficulties concerning the image interpretation due to different radiation sources and different emissivity values within a scene are addressed. Finally, reported forensic applications are reviewed and supported by practical illustrations. When introduced in forensic casework, infrared imaging can help investigators to detect, to visualize, and to identify useful evidence nondestructively. © 2013 American Academy of Forensic Sciences.

Detection of residues from explosive manipulation by near infrared hyperspectral imaging: a promising forensic tool.

PubMed

Fernández de la Ossa, Mª Ángeles; Amigo, José Manuel; García-Ruiz, Carmen

2014-09-01

In this study near infrared hyperspectral imaging (NIR-HSI) is used to provide a fast, non-contact, non-invasive and non-destructive method for the analysis of explosive residues on human handprints. Volunteers manipulated individually each of these explosives and after deposited their handprints on plastic sheets. For this purpose, classical explosives, potentially used as part of improvised explosive devices (IEDs) as ammonium nitrate, blackpowder, single- and double-base smokeless gunpowders and dynamite were studied. A partial-least squares discriminant analysis (PLS-DA) model was built to detect and classify the presence of explosive residues in handprints. High levels of sensitivity and specificity for the PLS-DA classification model created to identify ammonium nitrate, blackpowder, single- and double-base smokeless gunpowders and dynamite residues were obtained, allowing the development of a preliminary library and facilitating the direct and in situ detection of explosives by NIR-HSI. Consequently, this technique is showed as a promising forensic tool for the detection of explosive residues and other related samples. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Client-side Skype forensics: an overview

NASA Astrophysics Data System (ADS)

Meißner, Tina; Kröger, Knut; Creutzburg, Reiner

2013-03-01

IT security and computer forensics are important components in the information technology. In the present study, a client-side Skype forensics is performed. It is designed to explain which kind of user data are stored on a computer and which tools allow the extraction of those data for a forensic investigation. There are described both methods - a manual analysis and an analysis with (mainly) open source tools, respectively.

Forensic hash for multimedia information

NASA Astrophysics Data System (ADS)

Lu, Wenjun; Varna, Avinash L.; Wu, Min

2010-01-01

Digital multimedia such as images and videos are prevalent on today's internet and cause significant social impact, which can be evidenced by the proliferation of social networking sites with user generated contents. Due to the ease of generating and modifying images and videos, it is critical to establish trustworthiness for online multimedia information. In this paper, we propose novel approaches to perform multimedia forensics using compact side information to reconstruct the processing history of a document. We refer to this as FASHION, standing for Forensic hASH for informatION assurance. Based on the Radon transform and scale space theory, the proposed forensic hash is compact and can effectively estimate the parameters of geometric transforms and detect local tampering that an image may have undergone. Forensic hash is designed to answer a broader range of questions regarding the processing history of multimedia data than the simple binary decision from traditional robust image hashing, and also offers more efficient and accurate forensic analysis than multimedia forensic techniques that do not use any side information.

Mass spectrometry detection and imaging of inorganic and organic explosive device signatures using desorption electro-flow focusing ionization.

PubMed

Forbes, Thomas P; Sisco, Edward

2014-08-05

We demonstrate the coupling of desorption electro-flow focusing ionization (DEFFI) with in-source collision induced dissociation (CID) for the mass spectrometric (MS) detection and imaging of explosive device components, including both inorganic and organic explosives and energetic materials. We utilize in-source CID to enhance ion collisions with atmospheric gas, thereby reducing adducts and minimizing organic contaminants. Optimization of the MS signal response as a function of in-source CID potential demonstrated contrasting trends for the detection of inorganic and organic explosive device components. DEFFI-MS and in-source CID enabled isotopic and molecular speciation of inorganic components, providing further physicochemical information. The developed system facilitated the direct detection and chemical mapping of trace analytes collected with Nomex swabs and spatially resolved distributions within artificial fingerprints from forensic lift tape. The results presented here provide the forensic and security sectors a powerful tool for the detection, chemical imaging, and inorganic speciation of explosives device signatures.

iPhone forensics based on Macintosh open source and freeware tools

NASA Astrophysics Data System (ADS)

Höne, Thomas; Creutzburg, Reiner

2011-02-01

The aim of this article is to show the usefulness of Mac OS X based open source tools for forensic investigation of modern iPhones. It demonstrates how important data stored in the iPhone is investigated. Two different scenarios of investigations are presented that are well-suited for a forensics lab work in university. This work shows how to analyze an Apple iPhone using open source and freeware tools. Important data used in a forensics investigation, which are possibly stored on a mobile device are presented. Also the superstructure and functions of the iPhone are explained.

A forensic science perspective on the role of images in crime investigation and reconstruction.

PubMed

Milliet, Quentin; Delémont, Olivier; Margot, Pierre

2014-12-01

This article presents a global vision of images in forensic science. The proliferation of perspectives on the use of images throughout criminal investigations and the increasing demand for research on this topic seem to demand a forensic science-based analysis. In this study, the definitions of and concepts related to material traces are revisited and applied to images, and a structured approach is used to persuade the scientific community to extend and improve the use of images as traces in criminal investigations. Current research efforts focus on technical issues and evidence assessment. This article provides a sound foundation for rationalising and explaining the processes involved in the production of clues from trace images. For example, the mechanisms through which these visual traces become clues of presence or action are described. An extensive literature review of forensic image analysis emphasises the existing guidelines and knowledge available for answering investigative questions (who, what, where, when and how). However, complementary developments are still necessary to demystify many aspects of image analysis in forensic science, including how to review and select images or use them to reconstruct an event or assist intelligence efforts. The hypothetico-deductive reasoning pathway used to discover unknown elements of an event or crime can also help scientists understand the underlying processes involved in their decision making. An analysis of a single image in an investigative or probative context is used to demonstrate the highly informative potential of images as traces and/or clues. Research efforts should be directed toward formalising the extraction and combination of clues from images. An appropriate methodology is key to expanding the use of images in forensic science. Copyright © 2014 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

Imaging techniques in digital forensic investigation: a study using neural networks

NASA Astrophysics Data System (ADS)

Williams, Godfried

2006-09-01

Imaging techniques have been applied to a number of applications, such as translation and classification problems in medicine and defence. This paper examines the application of imaging techniques in digital forensics investigation using neural networks. A review of applications of digital image processing is presented, whiles a Pedagogical analysis of computer forensics is also highlighted. A data set describing selected images in different forms are used in the simulation and experimentation.

Dental x-ray image segmentation

NASA Astrophysics Data System (ADS)

Said, Eyad; Fahmy, Gamal F.; Nassar, Diaa; Ammar, Hany

2004-08-01

Law enforcement agencies have been exploiting biometric identifiers for decades as key tools in forensic identification. With the evolution in information technology and the huge volume of cases that need to be investigated by forensic specialists, it has become important to automate forensic identification systems. While, ante mortem (AM) identification, that is identification prior to death, is usually possible through comparison of many biometric identifiers, postmortem (PM) identification, that is identification after death, is impossible using behavioral biometrics (e.g. speech, gait). Moreover, under severe circumstances, such as those encountered in mass disasters (e.g. airplane crashers) or if identification is being attempted more than a couple of weeks postmortem, under such circumstances, most physiological biometrics may not be employed for identification, because of the decay of soft tissues of the body to unidentifiable states. Therefore, a postmortem biometric identifier has to resist the early decay that affects body tissues. Because of their survivability and diversity, the best candidates for postmortem biometric identification are the dental features. In this paper we present an over view about an automated dental identification system for Missing and Unidentified Persons. This dental identification system can be used by both law enforcement and security agencies in both forensic and biometric identification. We will also present techniques for dental segmentation of X-ray images. These techniques address the problem of identifying each individual tooth and how the contours of each tooth are extracted.

Virtobot--a multi-functional robotic system for 3D surface scanning and automatic post mortem biopsy.

PubMed

Ebert, Lars Christian; Ptacek, Wolfgang; Naether, Silvio; Fürst, Martin; Ross, Steffen; Buck, Ursula; Weber, Stefan; Thali, Michael

2010-03-01

The Virtopsy project, a multi-disciplinary project that involves forensic science, diagnostic imaging, computer science, automation technology, telematics and biomechanics, aims to develop new techniques to improve the outcome of forensic investigations. This paper presents a new approach in the field of minimally invasive virtual autopsy for a versatile robotic system that is able to perform three-dimensional (3D) surface scans as well as post mortem image-guided soft tissue biopsies. The system consists of an industrial six-axis robot with additional extensions (i.e. a linear axis to increase working space, a tool-changing system and a dedicated safety system), a multi-slice CT scanner with equipment for angiography, a digital photogrammetry and 3D optical surface-scanning system, a 3D tracking system, and a biopsy end effector for automatic needle placement. A wax phantom was developed for biopsy accuracy tests. Surface scanning times were significantly reduced (scanning times cut in half, calibration three times faster). The biopsy module worked with an accuracy of 3.2 mm. Using the Virtobot, the surface-scanning procedure could be standardized and accelerated. The biopsy module is accurate enough for use in biopsies in a forensic setting. The Virtobot can be utilized for several independent tasks in the field of forensic medicine, and is sufficiently versatile to be adapted to different tasks in the future. (c) 2009 John Wiley & Sons, Ltd.

Multiset singular value decomposition for joint analysis of multi-modal data: application to fingerprint analysis

NASA Astrophysics Data System (ADS)

Emge, Darren K.; Adalı, Tülay

2014-06-01

As the availability and use of imaging methodologies continues to increase, there is a fundamental need to jointly analyze data that is collected from multiple modalities. This analysis is further complicated when, the size or resolution of the images differ, implying that the observation lengths of each of modality can be highly varying. To address this expanding landscape, we introduce the multiset singular value decomposition (MSVD), which can perform a joint analysis on any number of modalities regardless of their individual observation lengths. Through simulations, the inter modal relationships across the different modalities which are revealed by the MSVD are shown. We apply the MSVD to forensic fingerprint analysis, showing that MSVD joint analysis successfully identifies relevant similarities for further analysis, significantly reducing the processing time required. This reduction, takes this technique from a laboratory method to a useful forensic tool with applications across the law enforcement and security regimes.

Forensic Analysis of Windows Hosts Using UNIX-based Tools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cory Altheide

2004-07-19

Many forensic examiners are introduced to UNIX-based forensic utilities when faced with investigating a UNIX-like operating system for the first time. They will use these utilities for this very specific task, because in many cases these tools are the only ones for the given job. For example, at the time of this writing, given a FreeBSD 5.x file system, the author's only choice is to use The Coroner's Toolkit running on FreeBSD 5.x. However, many of the same tools examiners use for the occasional UNIX-like system investigation are extremely capable when a Windows system is the target. Indeed, the Linuxmore » operating system itself can prove to be an extremely useful forensics platform with very little use of specialized forensics utilities at all.« less

Open Source Live Distributions for Computer Forensics

NASA Astrophysics Data System (ADS)

Giustini, Giancarlo; Andreolini, Mauro; Colajanni, Michele

Current distributions of open source forensic software provide digital investigators with a large set of heterogeneous tools. Their use is not always focused on the target and requires high technical expertise. We present a new GNU/Linux live distribution, named CAINE (Computer Aided INvestigative Environment) that contains a collection of tools wrapped up into a user friendly environment. The CAINE forensic framework introduces novel important features, aimed at filling the interoperability gap across different forensic tools. Moreover, it provides a homogeneous graphical interface that drives digital investigators during the acquisition and analysis of electronic evidence, and it offers a semi-automatic mechanism for the creation of the final report.

PIZZARO: Forensic analysis and restoration of image and video data.

PubMed

Kamenicky, Jan; Bartos, Michal; Flusser, Jan; Mahdian, Babak; Kotera, Jan; Novozamsky, Adam; Saic, Stanislav; Sroubek, Filip; Sorel, Michal; Zita, Ales; Zitova, Barbara; Sima, Zdenek; Svarc, Petr; Horinek, Jan

2016-07-01

This paper introduces a set of methods for image and video forensic analysis. They were designed to help to assess image and video credibility and origin and to restore and increase image quality by diminishing unwanted blur, noise, and other possible artifacts. The motivation came from the best practices used in the criminal investigation utilizing images and/or videos. The determination of the image source, the verification of the image content, and image restoration were identified as the most important issues of which automation can facilitate criminalists work. Novel theoretical results complemented with existing approaches (LCD re-capture detection and denoising) were implemented in the PIZZARO software tool, which consists of the image processing functionality as well as of reporting and archiving functions to ensure the repeatability of image analysis procedures and thus fulfills formal aspects of the image/video analysis work. Comparison of new proposed methods with the state of the art approaches is shown. Real use cases are presented, which illustrate the functionality of the developed methods and demonstrate their applicability in different situations. The use cases as well as the method design were solved in tight cooperation of scientists from the Institute of Criminalistics, National Drug Headquarters of the Criminal Police and Investigation Service of the Police of the Czech Republic, and image processing experts from the Czech Academy of Sciences. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

[Postmortem imaging studies with data processing and 3D reconstruction: a new path of development of classic forensic medicine?].

PubMed

Woźniak, Krzysztof; Moskała, Artur; Urbanik, Andrzej; Kopacz, Paweł; Kłys, Małgorzata

2009-01-01

The techniques employed in "classic" forensic autopsy have been virtually unchanged for many years. One of the fundamental purposes of forensic documentation is to register as objectively as possible the changes found by forensic pathologists. The authors present the review of techniques of postmortem imaging studies, which aim not only at increased objectivity of observations, but also at extending the scope of the registered data. The paper is illustrated by images originating from research carried out by the authors.

On detection of median filtering in digital images

NASA Astrophysics Data System (ADS)

Kirchner, Matthias; Fridrich, Jessica

2010-01-01

In digital image forensics, it is generally accepted that intentional manipulations of the image content are most critical and hence numerous forensic methods focus on the detection of such 'malicious' post-processing. However, it is also beneficial to know as much as possible about the general processing history of an image, including content-preserving operations, since they can affect the reliability of forensic methods in various ways. In this paper, we present a simple yet effective technique to detect median filtering in digital images-a widely used denoising and smoothing operator. As a great variety of forensic methods relies on some kind of a linearity assumption, a detection of non-linear median filtering is of particular interest. The effectiveness of our method is backed with experimental evidence on a large image database.

Automatic forensic face recognition from digital images.

PubMed

Peacock, C; Goode, A; Brett, A

2004-01-01

Digital image evidence is now widely available from criminal investigations and surveillance operations, often captured by security and surveillance CCTV. This has resulted in a growing demand from law enforcement agencies for automatic person-recognition based on image data. In forensic science, a fundamental requirement for such automatic face recognition is to evaluate the weight that can justifiably be attached to this recognition evidence in a scientific framework. This paper describes a pilot study carried out by the Forensic Science Service (UK) which explores the use of digital facial images in forensic investigation. For the purpose of the experiment a specific software package was chosen (Image Metrics Optasia). The paper does not describe the techniques used by the software to reach its decision of probabilistic matches to facial images, but accepts the output of the software as though it were a 'black box'. In this way, the paper lays a foundation for how face recognition systems can be compared in a forensic framework. The aim of the paper is to explore how reliably and under what conditions digital facial images can be presented in evidence.

TOF-SIMS Analysis of Red Color Inks of Writing and Printing Tools on Questioned Documents.

PubMed

Lee, Jihye; Nam, Yun Sik; Min, Jisook; Lee, Kang-Bong; Lee, Yeonhee

2016-05-01

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) is a well-established surface technique that provides both elemental and molecular information from several monolayers of a sample surface while also allowing depth profiling or image mapping to be performed. Static TOF-SIMS with improved performances has expanded the application of TOF-SIMS to the study of a variety of organic, polymeric, biological, archaeological, and forensic materials. In forensic investigation, the use of a minimal sample for the analysis is preferable. Although the TOF-SIMS technique is destructive, the probing beams have microsized diameters so that only small portion of the questioned sample is necessary for the analysis, leaving the rest available for other analyses. In this study, TOF-SIMS and attenuated total reflectance Fourier transform infrared (ATR-FTIR) were applied to the analysis of several different pen inks, red sealing inks, and printed patterns on paper. The overlapping areas of ballpoint pen writing, red seal stamping, and laser printing in a document were investigated to identify the sequence of recording. The sequence relations for various cases were determined from the TOF-SIMS mapping image and the depth profile. TOF-SIMS images were also used to investigate numbers or characters altered with two different red pens. TOF-SIMS was successfully used to determine the sequence of intersecting lines and the forged numbers on the paper. © 2016 American Academy of Forensic Sciences.

Enhancing forensic science with spectroscopic imaging

NASA Astrophysics Data System (ADS)

Ricci, Camilla; Kazarian, Sergei G.

2006-09-01

This presentation outlines the research we are developing in the area of Fourier Transform Infrared (FTIR) spectroscopic imaging with the focus on materials of forensic interest. FTIR spectroscopic imaging has recently emerged as a powerful tool for characterisation of heterogeneous materials. FTIR imaging relies on the ability of the military-developed infrared array detector to simultaneously measure spectra from thousands of different locations in a sample. Recently developed application of FTIR imaging using an ATR (Attenuated Total Reflection) mode has demonstrated the ability of this method to achieve spatial resolution beyond the diffraction limit of infrared light in air. Chemical visualisation with enhanced spatial resolution in micro-ATR mode broadens the range of materials studied with FTIR imaging with applications to pharmaceutical formulations or biological samples. Macro-ATR imaging has also been developed for chemical imaging analysis of large surface area samples and was applied to analyse the surface of human skin (e.g. finger), counterfeit tablets, textile materials (clothing), etc. This approach demonstrated the ability of this imaging method to detect trace materials attached to the surface of the skin. This may also prove as a valuable tool in detection of traces of explosives left or trapped on the surfaces of different materials. This FTIR imaging method is substantially superior to many of the other imaging methods due to inherent chemical specificity of infrared spectroscopy and fast acquisition times of this technique. Our preliminary data demonstrated that this methodology will provide the means to non-destructive detection method that could relate evidence to its source. This will be important in a wider crime prevention programme. In summary, intrinsic chemical specificity and enhanced visualising capability of FTIR spectroscopic imaging open a window of opportunities for counter-terrorism and crime-fighting, with applications ranging from analysis of trace evidence (e.g. in soil), tablets, drugs, fibres, tape explosives, biological samples to detection of gunshot residues and imaging of fingerprints.

The power of contextual effects in forensic anthropology: a study of biasability in the visual interpretations of trauma analysis on skeletal remains.

PubMed

Nakhaeizadeh, Sherry; Hanson, Ian; Dozzi, Nathalie

2014-09-01

The potential for contextual information to bias assessments in the forensic sciences has been demonstrated, in several forensic disiplines. In this paper, biasability potential within forensic anthropology was examined by analyzing the effects of external manipulations on judgments and decision-making in visual trauma assessment. Three separate websites were created containing fourteen identical images. Participants were randomly assigned to one website. Each website provided different contextual information, to assess variation of interpretation of the same images between contexts. The results indicated a higher scoring of trauma identification responses for the Mass grave context. Furthermore, a significant biasing effect was detected in the interpretation of four images. Less experienced participants were more likely to indicate presence of trauma. This research demonstrates bias impact in forensic anthropological trauma assessments and highlights the importance of recognizing and limiting cognitive vulnerabilities that forensic anthropologists might bring to the analysis. © 2014 American Academy of Forensic Sciences.

Identification of Skin Electrical Injury Using Infrared Imaging: A Possible Complementary Tool for Histological Examination

PubMed Central

Lin, Hancheng; Wang, Zhenyuan; Dong, Hongmei

2017-01-01

In forensic practice, determination of electrocution as a cause of death usually depends on the conventional histological examination of electrical mark in the body skin, but the limitation of this method includes subjective bias by different forensic pathologists, especially for identifying suspicious electrical mark. The aim of our work is to introduce Fourier transform infrared (FTIR) spectroscopy in combination with chemometrics as a complementary tool for providing an relatively objective diagnosis. The results of principle component analysis (PCA) showed that there were significant differences of protein structural profile between electrical mark and normal skin in terms of α-helix, antiparallel β-sheet and β-sheet content. Then a partial least square (PLS) model was established based on this spectral dataset and used to discriminate electrical mark from normal skin areas in independent tissue sections as revealed by color-coded digital maps, making the visualization of electrical injury more intuitively. Our pilot study demonstrates the potential of FTIR spectroscopy as a complementary tool for diagnosis of electrical mark. PMID:28118398

Can clinical CT data improve forensic reconstruction?

PubMed

Schuh, P; Scheurer, E; Fritz, K; Pavlic, M; Hassler, E; Rienmüller, R; Yen, K

2013-05-01

In accidents resulting in severe injuries, a clinical forensic examination is generally abandoned in the initial phase due to high-priority clinical needs. However, in many cases, data from clinical computed tomography (CT) examinations are available. The goals of this prospective study were (a) to evaluate clinical CT data as a basis for forensic reconstruction of the sequence of events, (b) to assess if forensic radiological follow-up reading improves the forensic diagnostic benefit compared to the written clinical radiological reports, and (c) to evaluate if full data storage including additional reconstructed 0.6-mm slices enhances forensic analysis. Clinical CT data of 15 living individuals with imaging of at least the head, thorax, and abdomen following polytrauma were examined regarding the forensic evaluation of the sequence of events. Additionally, 0.6-mm slices and 3D images were reconstructed for forensic purposes and used for the evaluation. At the forensic radiological readings, additional traumatic findings were observed in ten of the 15 patients. The main weakness of the clinical reports was that they were not detailed enough, particularly regarding the localization of injuries and description of wound morphology. In seven cases, however, forensic conclusions were possible on the basis of the written clinical reports, whereas in five cases forensic reconstruction required specific follow-up reading. The additional 0.6-mm slices were easily available and with improved 3D image quality and forensic diagnostics. In conclusion, the use of clinical CT data can considerably support forensic expertise regarding reconstruction issues. Forensic follow-up reading as well as the use of additional thin slices for 3D analysis can further improve its benefit for forensic reconstruction purposes.

The effect of image quality and forensic expertise in facial image comparisons.

PubMed

Norell, Kristin; Läthén, Klas Brorsson; Bergström, Peter; Rice, Allyson; Natu, Vaidehi; O'Toole, Alice

2015-03-01

Images of perpetrators in surveillance video footage are often used as evidence in court. In this study, identification accuracy was compared for forensic experts and untrained persons in facial image comparisons as well as the impact of image quality. Participants viewed thirty image pairs and were asked to rate the level of support garnered from their observations for concluding whether or not the two images showed the same person. Forensic experts reached their conclusions with significantly fewer errors than did untrained participants. They were also better than novices at determining when two high-quality images depicted the same person. Notably, lower image quality led to more careful conclusions by experts, but not for untrained participants. In summary, the untrained participants had more false negatives and false positives than experts, which in the latter case could lead to a higher risk of an innocent person being convicted for an untrained witness. © 2014 American Academy of Forensic Sciences.

FORENSIC RADIOLOGY AND IMAGING FOR VETERINARY RADIOLOGISTS.

PubMed

Watson, Elizabeth; Heng, Hock Gan

2017-05-01

Imaging studies are often of evidentiary value in medicolegal investigations involving animals and the role of the veterinary radiologist is to interpret those images for courts as an expert or opinion witness. With progressing interest in prosecuting animal crimes and strengthening of penalties for crimes against animals, the participation of veterinary radiologists in medicolegal investigations is expected to increase. Veterinary radiologists who are aware of radiographic and imaging signs that result in animal suffering, abuse, or neglect; knowledgeable in ways radiology and imaging may support cause of death determinations; conversant in postmortem imaging; comfortable discussing mechanisms and timing of blunt or sharp force and projectile trauma in imaging; and prepared to identify mimics of abuse can assist court participants in understanding imaging evidence. The goal of this commentary review is to familiarize veterinary radiologists with the forensic radiology and imaging literature and with the advantages and disadvantages of various imaging modalities utilized in forensic investigations. Another goal is to provide background information for future research studies in veterinary forensic radiology and imaging. © 2017 American College of Veterinary Radiology.

Image processing and 3D visualization in the interpretation of patterned injury of the skin

NASA Astrophysics Data System (ADS)

Oliver, William R.; Altschuler, Bruce R.

1995-09-01

The use of image processing is becoming increasingly important in the evaluation of violent crime. While much work has been done in the use of these techniques for forensic purposes outside of forensic pathology, its use in the pathologic examination of wounding has been limited. We are investigating the use of image processing in the analysis of patterned injuries and tissue damage. Our interests are currently concentrated on 1) the use of image processing techniques to aid the investigator in observing and evaluating patterned injuries in photographs, 2) measurement of the 3D shape characteristics of surface lesions, and 3) correlation of patterned injuries with deep tissue injury as a problem in 3D visualization. We are beginning investigations in data-acquisition problems for performing 3D scene reconstructions from the pathology perspective of correlating tissue injury to scene features and trace evidence localization. Our primary tool for correlation of surface injuries with deep tissue injuries has been the comparison of processed surface injury photographs with 3D reconstructions from antemortem CT and MRI data. We have developed a prototype robot for the acquisition of 3D wound and scene data.

Steganalysis feature improvement using expectation maximization

NASA Astrophysics Data System (ADS)

Rodriguez, Benjamin M.; Peterson, Gilbert L.; Agaian, Sos S.

2007-04-01

Images and data files provide an excellent opportunity for concealing illegal or clandestine material. Currently, there are over 250 different tools which embed data into an image without causing noticeable changes to the image. From a forensics perspective, when a system is confiscated or an image of a system is generated the investigator needs a tool that can scan and accurately identify files suspected of containing malicious information. The identification process is termed the steganalysis problem which focuses on both blind identification, in which only normal images are available for training, and multi-class identification, in which both the clean and stego images at several embedding rates are available for training. In this paper an investigation of a clustering and classification technique (Expectation Maximization with mixture models) is used to determine if a digital image contains hidden information. The steganalysis problem is for both anomaly detection and multi-class detection. The various clusters represent clean images and stego images with between 1% and 10% embedding percentage. Based on the results it is concluded that the EM classification technique is highly suitable for both blind detection and the multi-class problem.

Generation of intra-oral-like images from cone beam computed tomography volumes for dental forensic image comparison.

PubMed

Trochesset, Denise A; Serchuk, Richard B; Colosi, Dan C

2014-03-01

Identification of unknown individuals using dental comparison is well established in the forensic setting. The identification technique can be time and resource consuming if many individuals need to be identified at once. Medical CT (MDCT) for dental profiling has had limited success, mostly due to artifact from metal-containing dental restorations and implants. The authors describe a CBCT reformatting technique that creates images, which closely approximate conventional dental images. Using a i-CAT Platinum CBCT unit and standard issue i-CAT Vision software, a protocol is developed to reproducibly and reliably reformat CBCT volumes. The reformatted images are presented with conventional digital images from the same anatomic area for comparison. The authors conclude that images derived from CBCT volumes following this protocol are similar enough to conventional dental radiographs to allow for dental forensic comparison/identification and that CBCT offers a superior option over MDCT for this purpose. © 2013 American Academy of Forensic Sciences.

Preparation of longitudinal sections of hair samples for the analysis of cocaine by MALDI-MS/MS and TOF-SIMS imaging.

PubMed

Flinders, Bryn; Cuypers, Eva; Zeijlemaker, Hans; Tytgat, Jan; Heeren, Ron M A

2015-10-01

Matrix-assisted laser desorption/ionization-mass spectrometry imaging (MALDI-MSI) for the analysis of intact hair is a powerful tool for the detection of drugs of abuse in toxicology and forensic applications. Here we present a quick, easy, and reproducible method of preparing longitudinal sections of single hairs. This method improves the accessibility of chemicals embedded in the hair matrix for molecular imaging with mass spectrometry. The images obtained from a single, sectioned hair sample show molecular distributions in the exposed medulla, cortex, and a portion of the cuticle observed as a narrow layer surrounding the cortex. Using MALDI-MS/MS imaging, the distribution of cocaine was observed throughout five longitudinally sectioned drug-user hair samples. The images showed the distribution of the product ion at m/z 182, derived from the precursor ion of cocaine at m/z 304. MetA-SIMS images of longitudinally sectioned hair samples showed a more detailed distribution of cocaine at m/z 304, benzoylecgonine the major metabolite of cocaine at m/z 290 and other drugs such as methadone which was observed at m/z 310. Chronological information of drug intake can be obtained more sensitively. The chronological detail is in hours rather than months, which is of great interest in clinical as well as forensic applications. Copyright © 2015 John Wiley & Sons, Ltd.

[Progress in Application of Measuring Skeleton by CT in Forensic Anthropology Research].

PubMed

Miao, C Y; Xu, L; Wang, N; Zhang, M; Li, Y S; Lü, J X

2017-02-01

Individual identification by measuring the human skeleton is an important research in the field of forensic anthropology. Computed tomography （CT） technology can provide high-resolution image of skeleton. Skeleton image can be reformed by software in the post-processing workstation. Different skeleton measurement indexes of anthropology, such as diameter, angle, area and volume, can be measured on section and reformative images. Measurement process is barely affected by human factors. This paper reviews the literatures at home and abroad about the application of measuring skeleton by CT in forensic anthropology research for individual identification in four aspects, including sex determination, height infer, facial soft tissue thickness measurement and age estimation. The major technology and the application of CT in forensic anthropology research are compared and discussed, respectively. Copyright© by the Editorial Department of Journal of Forensic Medicine.

Tools for quality control of fingerprint databases

NASA Astrophysics Data System (ADS)

Swann, B. Scott; Libert, John M.; Lepley, Margaret A.

2010-04-01

Integrity of fingerprint data is essential to biometric and forensic applications. Accordingly, the FBI's Criminal Justice Information Services (CJIS) Division has sponsored development of software tools to facilitate quality control functions relative to maintaining its fingerprint data assets inherent to the Integrated Automated Fingerprint Identification System (IAFIS) and Next Generation Identification (NGI). This paper provides an introduction of two such tools. The first FBI-sponsored tool was developed by the National Institute of Standards and Technology (NIST) and examines and detects the spectral signature of the ridge-flow structure characteristic of friction ridge skin. The Spectral Image Validation/Verification (SIVV) utility differentiates fingerprints from non-fingerprints, including blank frames or segmentation failures erroneously included in data; provides a "first look" at image quality; and can identify anomalies in sample rates of scanned images. The SIVV utility might detect errors in individual 10-print fingerprints inaccurately segmented from the flat, multi-finger image acquired by one of the automated collection systems increasing in availability and usage. In such cases, the lost fingerprint can be recovered by re-segmentation from the now compressed multi-finger image record. The second FBI-sponsored tool, CropCoeff was developed by MITRE and thoroughly tested via NIST. CropCoeff enables cropping of the replacement single print directly from the compressed data file, thus avoiding decompression and recompression of images that might degrade fingerprint features necessary for matching.

A computational approach to estimate postmortem interval using opacity development of eye for human subjects.

PubMed

Cantürk, İsmail; Özyılmaz, Lale

2018-07-01

This paper presents an approach to postmortem interval (PMI) estimation, which is a very debated and complicated area of forensic science. Most of the reported methods to determine PMI in the literature are not practical because of the need for skilled persons and significant amounts of time, and give unsatisfactory results. Additionally, the error margin of PMI estimation increases proportionally with elapsed time after death. It is crucial to develop practical PMI estimation methods for forensic science. In this study, a computational system is developed to determine the PMI of human subjects by investigating postmortem opacity development of the eye. Relevant features from the eye images were extracted using image processing techniques to reflect gradual opacity development. The features were then investigated to predict the time after death using machine learning methods. The experimental results prove that the development of opacity can be utilized as a practical computational tool to determine PMI for human subjects. Copyright © 2018 Elsevier Ltd. All rights reserved.

Composite Artistry Meets Facial Recognition Technology: Exploring the Use of Facial Recognition Technology to Identify Composite Images

DTIC Science & Technology

2011-09-01

be submitted into a facial recognition program for comparison with millions of possible matches, offering abundant opportunities to identify the...to leverage the robust number of comparative opportunities associated with facial recognition programs. This research investigates the efficacy of...combining composite forensic artistry with facial recognition technology to create a viable investigative tool to identify suspects, as well as better

Review of Forensic Tools for Smartphones

NASA Astrophysics Data System (ADS)

Jahankhani, Hamid; Azam, Amir

The technological capability of mobile devices in particular Smartphones makes their use of value to the criminal community as a data terminal in the facilitation of organised crime or terrorism. The effective targeting of these devices from criminal and security intelligence perspectives and subsequent detailed forensic examination of the targeted device will significantly enhance the evidence available to the law enforcement community. When phone devices are involved in crimes, forensic examiners require tools that allow the proper retrieval and prompt examination of information present on these devices. Smartphones that are compliant to Global System for Mobile Communication (GSM) standards, will maintains their identity and user's personal information on Subscriber Identity Module (SIM). Beside SIM cards, substantial amount of information is stored on device's internal memory and external memory modules. The aim of this paper is to give an overview of the currently available forensic software tools that are developed to carry out forensic investigation of mobile devices and point to current weaknesses within this process.

Forensic use of photo response non-uniformity of imaging sensors and a counter method.

PubMed

Dirik, Ahmet Emir; Karaküçük, Ahmet

2014-01-13

Analogous to use of bullet scratches in forensic science, the authenticity of a digital image can be verified through the noise characteristics of an imaging sensor. In particular, photo-response non-uniformity noise (PRNU) has been used in source camera identification (SCI). However, this technique can be used maliciously to track or inculpate innocent people. To impede such tracking, PRNU noise should be suppressed significantly. Based on this motivation, we propose a counter forensic method to deceive SCI. Experimental results show that it is possible to impede PRNU-based camera identification for various imaging sensors while preserving the image quality.

Can dead man tooth do tell tales? Tooth prints in forensic identification.

PubMed

Christopher, Vineetha; Murthy, Sarvani; Ashwinirani, S R; Prasad, Kulkarni; Girish, Suragimath; Vinit, Shashikanth Patil

2017-01-01

We know that teeth trouble us a lot when we are alive, but they last longer for thousands of years even after we are dead. Teeth being the strongest and resistant structure are the most significant tool in forensic investigations. Patterns of enamel rod end on the tooth surface are known as tooth prints. This study is aimed to know whether these tooth prints can become a forensic tool in personal identification such as finger prints. A study has been targeted toward the same. In the present in-vivo study, acetate peel technique has been used to obtain the replica of enamel rod end patterns. Tooth prints of upper first premolars were recorded from 80 individuals after acid etching using cellulose acetate strips. Then, digital images of the tooth prints obtained at two different intervals were subjected to biometric conversion using Verifinger standard software development kit version 6.5 software followed by the use of Automated Fingerprint Identification System (AFIS) software for comparison of the tooth prints. Similarly, each individual's finger prints were also recorded and were subjected to the same software. Further, recordings of AFIS scores obtained from images were statistically analyzed using Cronbach's test. We observed that comparing two tooth prints taken from an individual at two intervals exhibited similarity in many cases, with wavy pattern tooth print being the predominant type. However, the same prints showed dissimilarity when compared with other individuals. We also found that most of the individuals with whorl pattern finger print showed wavy pattern tooth print and few loop type fingerprints showed linear pattern of tooth prints. Further more experiments on both tooth prints and finger prints are required in establishing an individual's identity.

Can dead man tooth do tell tales? Tooth prints in forensic identification

PubMed Central

Christopher, Vineetha; Murthy, Sarvani; Ashwinirani, S. R.; Prasad, Kulkarni; Girish, Suragimath; Vinit, Shashikanth Patil

2017-01-01

Background: We know that teeth trouble us a lot when we are alive, but they last longer for thousands of years even after we are dead. Teeth being the strongest and resistant structure are the most significant tool in forensic investigations. Patterns of enamel rod end on the tooth surface are known as tooth prints. Aim: This study is aimed to know whether these tooth prints can become a forensic tool in personal identification such as finger prints. A study has been targeted toward the same. Settings and Design: In the present in-vivo study, acetate peel technique has been used to obtain the replica of enamel rod end patterns. Materials and Methods: Tooth prints of upper first premolars were recorded from 80 individuals after acid etching using cellulose acetate strips. Then, digital images of the tooth prints obtained at two different intervals were subjected to biometric conversion using Verifinger standard software development kit version 6.5 software followed by the use of Automated Fingerprint Identification System (AFIS) software for comparison of the tooth prints. Similarly, each individual's finger prints were also recorded and were subjected to the same software. Statistical Analysis: Further, recordings of AFIS scores obtained from images were statistically analyzed using Cronbach's test. Results: We observed that comparing two tooth prints taken from an individual at two intervals exhibited similarity in many cases, with wavy pattern tooth print being the predominant type. However, the same prints showed dissimilarity when compared with other individuals. We also found that most of the individuals with whorl pattern finger print showed wavy pattern tooth print and few loop type fingerprints showed linear pattern of tooth prints. Conclusions: Further more experiments on both tooth prints and finger prints are required in establishing an individual's identity. PMID:28584483

Introducing the Forensic Research/Reference on Genetics knowledge base, FROG-kb.

PubMed

Rajeevan, Haseena; Soundararajan, Usha; Pakstis, Andrew J; Kidd, Kenneth K

2012-09-01

Online tools and databases based on multi-allelic short tandem repeat polymorphisms (STRPs) are actively used in forensic teaching, research, and investigations. The Fst value of each CODIS marker tends to be low across the populations of the world and most populations typically have all the common STRP alleles present diminishing the ability of these systems to discriminate ethnicity. Recently, considerable research is being conducted on single nucleotide polymorphisms (SNPs) to be considered for human identification and description. However, online tools and databases that can be used for forensic research and investigation are limited. The back end DBMS (Database Management System) for FROG-kb is Oracle version 10. The front end is implemented with specific code using technologies such as Java, Java Servlet, JSP, JQuery, and GoogleCharts. We present an open access web application, FROG-kb (Forensic Research/Reference on Genetics-knowledge base, http://frog.med.yale.edu), that is useful for teaching and research relevant to forensics and can serve as a tool facilitating forensic practice. The underlying data for FROG-kb are provided by the already extensively used and referenced ALlele FREquency Database, ALFRED (http://alfred.med.yale.edu). In addition to displaying data in an organized manner, computational tools that use the underlying allele frequencies with user-provided data are implemented in FROG-kb. These tools are organized by the different published SNP/marker panels available. This web tool currently has implemented general functions possible for two types of SNP panels, individual identification and ancestry inference, and a prediction function specific to a phenotype informative panel for eye color. The current online version of FROG-kb already provides new and useful functionality. We expect FROG-kb to grow and expand in capabilities and welcome input from the forensic community in identifying datasets and functionalities that will be most helpful and useful. Thus, the structure and functionality of FROG-kb will be revised in an ongoing process of improvement. This paper describes the state as of early June 2012.

Preliminary analysis of facial hair follicle distribution for forensic identification using OCT

NASA Astrophysics Data System (ADS)

Zhang, Ning; Wang, Chengming; Li, Zhigang; Xie, Lanchi; Guo, Jingjing; Xu, Lei; Yan, Yuwen; Li, Zhihui; Huang, Wei; Xu, Xiaojing

2018-02-01

In most deaths caused by explosions, the fragment of explosive remained on the victim's body can provide valuable clues to forensic investigation. However, the examination of the skin and appendages at the scene of explosion, which may reveal clue to the identity of an individual, has not been extensively studied. Compared with visual appearance of the epidermis surface that affected by various wounds, skin adnexa embedded in the dermis has a more stable morphology as an inner biometric. Hair follicles are formed when a fetus is 5 months old and distributed fairly evenly throughout the body, with the exception of hairless palms and soles. Therefore, we focus on the distribution of hair follicles in order to infer information of age, gender, and race/ethnicity. Optical coherence tomography (OCT) is a novel forensic imaging method, which achieves non-destructive, high-resolution and most importantly cross-sectional imaging. In this study, we design and develop a custom-built spectral-domain three-dimensional (3D) OCT system with a portable handheld probe to detect and reconstruct the hair follicles in the facial skin. We test our system on the forehead and preauricular skin of 2 adult volunteers and demonstrate the high quality visualization of hair follicles beneath the epidermis. The diameter, orientation, density and shape of hair follicles can be extracted from the 3D volume data. The preliminary analysis suggests that these parameters vary from different part of body and have individual difference. Eventually, we believe 3D OCT is promising tool for the examination of hair follicles for forensic purpose.

Detection and volume estimation of artificial hematomas in the subcutaneous fatty tissue: comparison of different MR sequences at 3.0 T.

PubMed

Ogris, Kathrin; Petrovic, Andreas; Scheicher, Sylvia; Sprenger, Hanna; Urschler, Martin; Hassler, Eva Maria; Yen, Kathrin; Scheurer, Eva

2017-06-01

In legal medicine, reliable localization and analysis of hematomas in subcutaneous fatty tissue is required for forensic reconstruction. Due to the absence of ionizing radiation, magnetic resonance imaging (MRI) is particularly suited to examining living persons with forensically relevant injuries. However, there is limited experience regarding MRI signal properties of hemorrhage in soft tissue. The aim of this study was to evaluate MR sequences with respect to their ability to show high contrast between hematomas and subcutaneous fatty tissue as well as to reliably determine the volume of artificial hematomas. Porcine tissue models were prepared by injecting blood into the subcutaneous fatty tissue to create artificial hematomas. MR images were acquired at 3T and four blinded observers conducted manual segmentation of the hematomas. To assess segmentability, the agreement of measured volume with the known volume of injected blood was statistically analyzed. A physically motivated normalization taking into account partial volume effect was applied to the data to ensure comparable results among differently sized hematomas. The inversion recovery sequence exhibited the best segmentability rate, whereas the T1T2w turbo spin echo sequence showed the most accurate results regarding volume estimation. Both sequences led to reproducible volume estimations. This study demonstrates that MRI is a promising forensic tool to assess and visualize even very small amounts of blood in soft tissue. The presented results enable the improvement of protocols for detection and volume determination of hemorrhage in forensically relevant cases and also provide fundamental knowledge for future in-vivo examinations.

Development of modern human subadult age and sex estimation standards using multi-slice computed tomography images from medical examiner's offices

NASA Astrophysics Data System (ADS)

Stock, Michala K.; Stull, Kyra E.; Garvin, Heather M.; Klales, Alexandra R.

2016-10-01

Forensic anthropologists are routinely asked to estimate a biological profile (i.e., age, sex, ancestry and stature) from a set of unidentified remains. In contrast to the abundance of collections and techniques associated with adult skeletons, there is a paucity of modern, documented subadult skeletal material, which limits the creation and validation of appropriate forensic standards. Many are forced to use antiquated methods derived from small sample sizes, which given documented secular changes in the growth and development of children, are not appropriate for application in the medico-legal setting. Therefore, the aim of this project is to use multi-slice computed tomography (MSCT) data from a large, diverse sample of modern subadults to develop new methods to estimate subadult age and sex for practical forensic applications. The research sample will consist of over 1,500 full-body MSCT scans of modern subadult individuals (aged birth to 20 years) obtained from two U.S. medical examiner's offices. Statistical analysis of epiphyseal union scores, long bone osteometrics, and os coxae landmark data will be used to develop modern subadult age and sex estimation standards. This project will result in a database of information gathered from the MSCT scans, as well as the creation of modern, statistically rigorous standards for skeletal age and sex estimation in subadults. Furthermore, the research and methods developed in this project will be applicable to dry bone specimens, MSCT scans, and radiographic images, thus providing both tools and continued access to data for forensic practitioners in a variety of settings.

A review of bioinformatic methods for forensic DNA analyses.

PubMed

Liu, Yao-Yuan; Harbison, SallyAnn

2018-03-01

Short tandem repeats, single nucleotide polymorphisms, and whole mitochondrial analyses are three classes of markers which will play an important role in the future of forensic DNA typing. The arrival of massively parallel sequencing platforms in forensic science reveals new information such as insights into the complexity and variability of the markers that were previously unseen, along with amounts of data too immense for analyses by manual means. Along with the sequencing chemistries employed, bioinformatic methods are required to process and interpret this new and extensive data. As more is learnt about the use of these new technologies for forensic applications, development and standardization of efficient, favourable tools for each stage of data processing is being carried out, and faster, more accurate methods that improve on the original approaches have been developed. As forensic laboratories search for the optimal pipeline of tools, sequencer manufacturers have incorporated pipelines into sequencer software to make analyses convenient. This review explores the current state of bioinformatic methods and tools used for the analyses of forensic markers sequenced on the massively parallel sequencing (MPS) platforms currently most widely used. Copyright © 2017 Elsevier B.V. All rights reserved.

Virtual forensic anthropology: Novel applications of anthropometry and technology in a child death case.

PubMed

Davy-Jow, Stephanie Lynn; Lees, Duncan M B; Russell, Sean

2013-01-10

Full-body 3D virtual reconstructions were generated using 3D technology and anthropometry following the death of a young girl, allegedly from severe malnutrition as a result of abuse and neglect. Close range laser scanning, in conjunction with full colour digital texture photography, was used to document the child's condition shortly after death in order to demonstrate the number and pattern of injuries and to be able to demonstrate her condition forensically. Full-body digital reconstructions were undertaken to illustrate the extent of the malnutrition by comparing the processed post mortem scans with reconstructed images at normal weight for height and age. This is the first known instance of such an investigative tool. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Perceptual expertise in forensic facial image comparison

PubMed Central

White, David; Phillips, P. Jonathon; Hahn, Carina A.; Hill, Matthew; O'Toole, Alice J.

2015-01-01

Forensic facial identification examiners are required to match the identity of faces in images that vary substantially, owing to changes in viewing conditions and in a person's appearance. These identifications affect the course and outcome of criminal investigations and convictions. Despite calls for research on sources of human error in forensic examination, existing scientific knowledge of face matching accuracy is based, almost exclusively, on people without formal training. Here, we administered three challenging face matching tests to a group of forensic examiners with many years' experience of comparing face images for law enforcement and government agencies. Examiners outperformed untrained participants and computer algorithms, thereby providing the first evidence that these examiners are experts at this task. Notably, computationally fusing responses of multiple experts produced near-perfect performance. Results also revealed qualitative differences between expert and non-expert performance. First, examiners' superiority was greatest at longer exposure durations, suggestive of more entailed comparison in forensic examiners. Second, experts were less impaired by image inversion than non-expert students, contrasting with face memory studies that show larger face inversion effects in high performers. We conclude that expertise in matching identity across unfamiliar face images is supported by processes that differ qualitatively from those supporting memory for individual faces. PMID:26336174

Forensic firearm identification of semiautomatic handguns using laser formed microstamping elements

NASA Astrophysics Data System (ADS)

Lizotte, Todd E.; Ohar, Orest

2008-08-01

For well over one hundred years the science of Firearm and Tool Mark Identification has relied on the theory that unintentional random tooling marks generated during the manufacture of a firearm onto its interior surfaces are unique to each individual firearm.[1][2] Forensic Firearm and Tool Mark Examiners have had to rely on the analysis of these randomly formed unintentional striations, or scratches and dings, transferred onto ammunition components from firearms used to commit crimes, as a way of developing clues and evidence. Such transfers take place during the cycle of fire and ejection of the cartridge from the firearm during the commission of a crime. The typical striations on the cartridge casings are caused by tooling marks that are randomly formed during the machining of interior surfaces of the manufactured firearm and by other firearm components that come in contact with the cycling ammunition. Components like the firing pin, extractor and ejector, impact the surfaces of the cartridges as they are fed, fired and ejected from the firearm. When found at a crime scene, these striae constitute ballistic evidence when effectively analyzed by a Forensic Firearm and Tool Mark Examiner. Examiners categorize these striations looking for matches to be made between the components that created the marks and the recovered firearm. Reality is that nearly 50% of firearms used in violent crimes are not recovered at a crime scene, requiring the analysis to be processed and logged into evidence files or imaged into reference image databases for future comparison whenever a firearm might be recovered. This paper will present a unique law enforcement technology, embedded into firearms for tracking the sources of illegally trafficked firearms, called Microstamping. Microstamping is a laser based micromachining process that forms microscopic "intentional structures and marks" on components within a firearm. Thus when the firearm is fired, these microstamp structures transfer an identifying tracking code onto the expended cartridge ejected from the firearm. Microstamped structures are laser micromachined alpha numeric and encoded geometric tracking numbers, linked to the serial number of the firearm. Ballistic testing data will be presented covering microstamp transfer quality, transfer rates and survivability/durability. Further information will provide an overview on how microstamping information can be utilized by law enforcement to combat illegal firearm trafficking.

Chain of evidence generation for contrast enhancement in digital image forensics

NASA Astrophysics Data System (ADS)

Battiato, Sebastiano; Messina, Giuseppe; Strano, Daniela

2010-01-01

The quality of the images obtained by digital cameras has improved a lot since digital cameras early days. Unfortunately, it is not unusual in image forensics to find wrongly exposed pictures. This is mainly due to obsolete techniques or old technologies, but also due to backlight conditions. To extrapolate some invisible details a stretching of the image contrast is obviously required. The forensics rules to produce evidences require a complete documentation of the processing steps, enabling the replication of the entire process. The automation of enhancement techniques is thus quite difficult and needs to be carefully documented. This work presents an automatic procedure to find contrast enhancement settings, allowing both image correction and automatic scripting generation. The technique is based on a preprocessing step which extracts the features of the image and selects correction parameters. The parameters are thus saved through a JavaScript code that is used in the second step of the approach to correct the image. The generated script is Adobe Photoshop compliant (which is largely used in image forensics analysis) thus permitting the replication of the enhancement steps. Experiments on a dataset of images are also reported showing the effectiveness of the proposed methodology.

Visualization of JPEG Metadata

NASA Astrophysics Data System (ADS)

Malik Mohamad, Kamaruddin; Deris, Mustafa Mat

There are a lot of information embedded in JPEG image than just graphics. Visualization of its metadata would benefit digital forensic investigator to view embedded data including corrupted image where no graphics can be displayed in order to assist in evidence collection for cases such as child pornography or steganography. There are already available tools such as metadata readers, editors and extraction tools but mostly focusing on visualizing attribute information of JPEG Exif. However, none have been done to visualize metadata by consolidating markers summary, header structure, Huffman table and quantization table in a single program. In this paper, metadata visualization is done by developing a program that able to summarize all existing markers, header structure, Huffman table and quantization table in JPEG. The result shows that visualization of metadata helps viewing the hidden information within JPEG more easily.

Prediction of age and gender using digital radiographic method: A retrospective study.

PubMed

Poongodi, V; Kanmani, R; Anandi, M S; Krithika, C L; Kannan, A; Raghuram, P H

2015-08-01

To investigate age, sex based on gonial angle, width and breadth of the ramus of the mandible by digital orthopantomograph. A total of 200 panoramic radiographic images were selected. The age of the individuals ranged between 4 and 75 years of both the gender - males (113) and females (87) and selected radiographic images were measured using KLONK image measurement software tool with linear, angular measurement. The investigated radiographs were collected from the records of SRM Dental College, Department of Oral Medicine and Radiology. Radiographs with any pathology, facial deformities, if no observation of mental foramen, congenital deformities, magnification, and distortion were excluded. Mean, median, standard deviation, derived to check the first and third quartile, linear regression is used to check age and gender correlation with angle of mandible, height and width of the ramus of mandible. The radiographic method is a simpler and cost-effective method of age identification compared with histological and biochemical methods. Mandible is strongest facial bone after the skull, pelvic bone. It is validatory to predict age and gender by many previous studies. Radiographic and tomographic images have become an essential aid for human identification in forensic dentistry forensic dentists can choose the most appropriate one since the validity of age and gender estimation crucially depends on the method used and its proper application.

Color separation in forensic image processing using interactive differential evolution.

PubMed

Mushtaq, Harris; Rahnamayan, Shahryar; Siddiqi, Areeb

2015-01-01

Color separation is an image processing technique that has often been used in forensic applications to differentiate among variant colors and to remove unwanted image interference. This process can reveal important information such as covered text or fingerprints in forensic investigation procedures. However, several limitations prevent users from selecting the appropriate parameters pertaining to the desired and undesired colors. This study proposes the hybridization of an interactive differential evolution (IDE) and a color separation technique that no longer requires users to guess required control parameters. The IDE algorithm optimizes these parameters in an interactive manner by utilizing human visual judgment to uncover desired objects. A comprehensive experimental verification has been conducted on various sample test images, including heavily obscured texts, texts with subtle color variations, and fingerprint smudges. The advantage of IDE is apparent as it effectively optimizes the color separation parameters at a level indiscernible to the naked eyes. © 2014 American Academy of Forensic Sciences.

Overview of Digital Forensics Algorithms in Dslr Cameras

NASA Astrophysics Data System (ADS)

Aminova, E.; Trapeznikov, I.; Priorov, A.

2017-05-01

The widespread usage of the mobile technologies and the improvement of the digital photo devices getting has led to more frequent cases of falsification of images including in the judicial practice. Consequently, the actual task for up-to-date digital image processing tools is the development of algorithms for determining the source and model of the DSLR (Digital Single Lens Reflex) camera and improve image formation algorithms. Most research in this area based on the mention that the extraction of unique sensor trace of DSLR camera could be possible on the certain stage of the imaging process into the camera. It is considered that the study focuses on the problem of determination of unique feature of DSLR cameras based on optical subsystem artifacts and sensor noises.

[Possibilities of use of digital imaging in forensic medicine].

PubMed

Gaval'a, P; Ivicsics, I; Mlynár, J; Novomeský, F

2005-07-01

Based on the daily practice with digital photography and documentation, the authors point out the achievements of the computer technologies implementation to the practice of forensic medicine. The modern methods of imaging, especially the digital photography, offer a wide spectrum of use in forensic medicine--the digital documentation and archivation of autopsy findings, the possibility of immediate consultation of findings with another experts via Internet, and many others. Another possibility is a creation of digital photographic atlas of forensic medicine as a useful aid in pre- and postgradual study. Thus the application of the state-of-the-art computer technologies to the forensic medicine discloses the unknown before possibilities for further development of such a discipline of human medical sciences.

A complete passive blind image copy-move forensics scheme based on compound statistics features.

PubMed

Peng, Fei; Nie, Yun-ying; Long, Min

2011-10-10

Since most sensor pattern noise based image copy-move forensics methods require a known reference sensor pattern noise, it generally results in non-blinded passive forensics, which significantly confines the application circumstances. In view of this, a novel passive-blind image copy-move forensics scheme is proposed in this paper. Firstly, a color image is transformed into a grayscale one, and wavelet transform based de-noising filter is used to extract the sensor pattern noise, then the variance of the pattern noise, the signal noise ratio between the de-noised image and the pattern noise, the information entropy and the average energy gradient of the original grayscale image are chosen as features, non-overlapping sliding window operations are done to the images to divide them into different sub-blocks. Finally, the tampered areas are detected by analyzing the correlation of the features between the sub-blocks and the whole image. Experimental results and analysis show that the proposed scheme is completely passive-blind, has a good detection rate, and is robust against JPEG compression, noise, rotation, scaling and blurring. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Statistical methods for the forensic analysis of striated tool marks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoeksema, Amy Beth

In forensics, fingerprints can be used to uniquely identify suspects in a crime. Similarly, a tool mark left at a crime scene can be used to identify the tool that was used. However, the current practice of identifying matching tool marks involves visual inspection of marks by forensic experts which can be a very subjective process. As a result, declared matches are often successfully challenged in court, so law enforcement agencies are particularly interested in encouraging research in more objective approaches. Our analysis is based on comparisons of profilometry data, essentially depth contours of a tool mark surface taken alongmore » a linear path. In current practice, for stronger support of a match or non-match, multiple marks are made in the lab under the same conditions by the suspect tool. We propose the use of a likelihood ratio test to analyze the difference between a sample of comparisons of lab tool marks to a field tool mark, against a sample of comparisons of two lab tool marks. Chumbley et al. (2010) point out that the angle of incidence between the tool and the marked surface can have a substantial impact on the tool mark and on the effectiveness of both manual and algorithmic matching procedures. To better address this problem, we describe how the analysis can be enhanced to model the effect of tool angle and allow for angle estimation for a tool mark left at a crime scene. With sufficient development, such methods may lead to more defensible forensic analyses.« less

Advanced Forensic Format: an Open Extensible Format for Disk Imaging

NASA Astrophysics Data System (ADS)

Garfinkel, Simson; Malan, David; Dubec, Karl-Alexander; Stevens, Christopher; Pham, Cecile

This paper describes the Advanced Forensic Format (AFF), which is designed as an alternative to current proprietary disk image formats. AFF offers two significant benefits. First, it is more flexible because it allows extensive metadata to be stored with images. Second, AFF images consume less disk space than images in other formats (e.g., EnCase images). This paper also describes the Advanced Disk Imager, a new program for acquiring disk images that compares favorably with existing alternatives.

[The application of X-ray imaging in forensic medicine].

PubMed

Kučerová, Stěpánka; Safr, Miroslav; Ublová, Michaela; Urbanová, Petra; Hejna, Petr

2014-07-01

X-ray is the most common, basic and essential imaging method used in forensic medicine. It serves to display and localize the foreign objects in the body and helps to detect various traumatic and pathological changes. X-ray imaging is valuable in anthropological assessment of an individual. X-ray allows non-invasive evaluation of important findings before the autopsy and thus selection of the optimal strategy for dissection. Basic indications for postmortem X-ray imaging in forensic medicine include gunshot and explosive fatalities (identification and localization of projectiles or other components of ammunition, visualization of secondary missiles), sharp force injuries (air embolism, identification of the weapon) and motor vehicle related deaths. The method is also helpful for complex injury evaluation in abused victims or in persons where abuse is suspected. Finally, X-ray imaging still remains the gold standard method for identification of unknown deceased. With time modern imaging methods, especially computed tomography and magnetic resonance imaging, are more and more applied in forensic medicine. Their application extends possibilities of the visualization the bony structures toward a more detailed imaging of soft tissues and internal organs. The application of modern imaging methods in postmortem body investigation is known as digital or virtual autopsy. At present digital postmortem imaging is considered as a bloodless alternative to the conventional autopsy.

The use of self-organising maps for anomalous behaviour detection in a digital investigation.

PubMed

Fei, B K L; Eloff, J H P; Olivier, M S; Venter, H S

2006-10-16

The dramatic increase in crime relating to the Internet and computers has caused a growing need for digital forensics. Digital forensic tools have been developed to assist investigators in conducting a proper investigation into digital crimes. In general, the bulk of the digital forensic tools available on the market permit investigators to analyse data that has been gathered from a computer system. However, current state-of-the-art digital forensic tools simply cannot handle large volumes of data in an efficient manner. With the advent of the Internet, many employees have been given access to new and more interesting possibilities via their desktop. Consequently, excessive Internet usage for non-job purposes and even blatant misuse of the Internet have become a problem in many organisations. Since storage media are steadily growing in size, the process of analysing multiple computer systems during a digital investigation can easily consume an enormous amount of time. Identifying a single suspicious computer from a set of candidates can therefore reduce human processing time and monetary costs involved in gathering evidence. The focus of this paper is to demonstrate how, in a digital investigation, digital forensic tools and the self-organising map (SOM)--an unsupervised neural network model--can aid investigators to determine anomalous behaviours (or activities) among employees (or computer systems) in a far more efficient manner. By analysing the different SOMs (one for each computer system), anomalous behaviours are identified and investigators are assisted to conduct the analysis more efficiently. The paper will demonstrate how the easy visualisation of the SOM enhances the ability of the investigators to interpret and explore the data generated by digital forensic tools so as to determine anomalous behaviours.

Perceptual expertise in forensic facial image comparison.

PubMed

White, David; Phillips, P Jonathon; Hahn, Carina A; Hill, Matthew; O'Toole, Alice J

2015-09-07

Forensic facial identification examiners are required to match the identity of faces in images that vary substantially, owing to changes in viewing conditions and in a person's appearance. These identifications affect the course and outcome of criminal investigations and convictions. Despite calls for research on sources of human error in forensic examination, existing scientific knowledge of face matching accuracy is based, almost exclusively, on people without formal training. Here, we administered three challenging face matching tests to a group of forensic examiners with many years' experience of comparing face images for law enforcement and government agencies. Examiners outperformed untrained participants and computer algorithms, thereby providing the first evidence that these examiners are experts at this task. Notably, computationally fusing responses of multiple experts produced near-perfect performance. Results also revealed qualitative differences between expert and non-expert performance. First, examiners' superiority was greatest at longer exposure durations, suggestive of more entailed comparison in forensic examiners. Second, experts were less impaired by image inversion than non-expert students, contrasting with face memory studies that show larger face inversion effects in high performers. We conclude that expertise in matching identity across unfamiliar face images is supported by processes that differ qualitatively from those supporting memory for individual faces. © 2015 The Author(s).

Introducing the Forensic Research/Reference on Genetics knowledge base, FROG-kb

PubMed Central

2012-01-01

Background Online tools and databases based on multi-allelic short tandem repeat polymorphisms (STRPs) are actively used in forensic teaching, research, and investigations. The Fst value of each CODIS marker tends to be low across the populations of the world and most populations typically have all the common STRP alleles present diminishing the ability of these systems to discriminate ethnicity. Recently, considerable research is being conducted on single nucleotide polymorphisms (SNPs) to be considered for human identification and description. However, online tools and databases that can be used for forensic research and investigation are limited. Methods The back end DBMS (Database Management System) for FROG-kb is Oracle version 10. The front end is implemented with specific code using technologies such as Java, Java Servlet, JSP, JQuery, and GoogleCharts. Results We present an open access web application, FROG-kb (Forensic Research/Reference on Genetics-knowledge base, http://frog.med.yale.edu), that is useful for teaching and research relevant to forensics and can serve as a tool facilitating forensic practice. The underlying data for FROG-kb are provided by the already extensively used and referenced ALlele FREquency Database, ALFRED (http://alfred.med.yale.edu). In addition to displaying data in an organized manner, computational tools that use the underlying allele frequencies with user-provided data are implemented in FROG-kb. These tools are organized by the different published SNP/marker panels available. This web tool currently has implemented general functions possible for two types of SNP panels, individual identification and ancestry inference, and a prediction function specific to a phenotype informative panel for eye color. Conclusion The current online version of FROG-kb already provides new and useful functionality. We expect FROG-kb to grow and expand in capabilities and welcome input from the forensic community in identifying datasets and functionalities that will be most helpful and useful. Thus, the structure and functionality of FROG-kb will be revised in an ongoing process of improvement. This paper describes the state as of early June 2012. PMID:22938150

Virtobot 2.0: the future of automated surface documentation and CT-guided needle placement in forensic medicine.

PubMed

Ebert, Lars Christian; Ptacek, Wolfgang; Breitbeck, Robert; Fürst, Martin; Kronreif, Gernot; Martinez, Rosa Maria; Thali, Michael; Flach, Patricia M

2014-06-01

In this paper we present the second prototype of a robotic system to be used in forensic medicine. The system is capable of performing automated surface documentation using photogrammetry, optical surface scanning and image-guided, post-mortem needle placement for tissue sampling, liquid sampling, or the placement of guide wires. The upgraded system includes workflow optimizations, an automatic tool-change mechanism, a new software module for trajectory planning and a fully automatic computed tomography-data-set registration algorithm. We tested the placement accuracy of the system by using a needle phantom with radiopaque markers as targets. The system is routinely used for surface documentation and resulted in 24 surface documentations over the course of 11 months. We performed accuracy tests for needle placement using a biopsy phantom, and the Virtobot placed introducer needles with an accuracy of 1.4 mm (±0.9 mm). The second prototype of the Virtobot system is an upgrade of the first prototype but mainly focuses on streamlining the workflow and increasing the level of automation and also has an easier user interface. These upgrades make the Virtobot a potentially valuable tool for case documentation in a scalpel-free setting that uses purely imaging techniques and minimally invasive procedures and is the next step toward the future of virtual autopsy.

Preliminary application of Structure from Motion and GIS to document decomposition and taphonomic processes.

PubMed

Carlton, Connor D; Mitchell, Samantha; Lewis, Patrick

2018-01-01

Over the past decade, Structure from Motion (SfM) has increasingly been used as a means of digital preservation and for documenting archaeological excavations, architecture, and cultural material. However, few studies have tapped the potential of using SfM to document and analyze taphonomic processes affecting burials for forensic sciences purposes. This project utilizes SfM models to elucidate specific post-depositional events that affected a series of three human cadavers deposited at the South East Texas Applied Forensic Science Facility (STAFS). The aim of this research was to test the ability for untrained researchers to employ spatial software and photogrammetry for data collection purposes. For a series of three months a single lens reflex (SLR) camera was used to capture a series of overlapping images at periodic stages in the decomposition process of each cadaver. These images are processed through photogrammetric software that creates a 3D model that can be measured, manipulated, and viewed. This project used photogrammetric and geospatial software to map changes in decomposition and movement of the body from original deposition points. Project results indicate SfM and GIS as a useful tool for documenting decomposition and taphonomic processes. Results indicate photogrammetry is an efficient, relatively simple, and affordable tool for the documentation of decomposition. Copyright © 2017 Elsevier B.V. All rights reserved.

Matching forensic sketches to mug shot photos.

PubMed

Klare, Brendan F; Li, Zhifeng; Jain, Anil K

2011-03-01

The problem of matching a forensic sketch to a gallery of mug shot images is addressed in this paper. Previous research in sketch matching only offered solutions to matching highly accurate sketches that were drawn while looking at the subject (viewed sketches). Forensic sketches differ from viewed sketches in that they are drawn by a police sketch artist using the description of the subject provided by an eyewitness. To identify forensic sketches, we present a framework called local feature-based discriminant analysis (LFDA). In LFDA, we individually represent both sketches and photos using SIFT feature descriptors and multiscale local binary patterns (MLBP). Multiple discriminant projections are then used on partitioned vectors of the feature-based representation for minimum distance matching. We apply this method to match a data set of 159 forensic sketches against a mug shot gallery containing 10,159 images. Compared to a leading commercial face recognition system, LFDA offers substantial improvements in matching forensic sketches to the corresponding face images. We were able to further improve the matching performance using race and gender information to reduce the target gallery size. Additional experiments demonstrate that the proposed framework leads to state-of-the-art accuracys when matching viewed sketches.

Cost-effective forensic image enhancement

NASA Astrophysics Data System (ADS)

Dalrymple, Brian E.

1998-12-01

In 1977, a paper was presented at the SPIE conference in Reston, Virginia, detailing the computer enhancement of the Zapruder film. The forensic value of this examination in a major homicide investigation was apparent to the viewer. Equally clear was the potential for extracting evidence which is beyond the reach of conventional detection techniques. The cost of this technology in 1976, however, was prohibitive, and well beyond the means of most police agencies. Twenty-two years later, a highly efficient means of image enhancement is easily within the grasp of most police agencies, not only for homicides but for any case application. A PC workstation combined with an enhancement software package allows a forensic investigator to fully exploit digital technology. The goal of this approach is the optimization of the signal to noise ratio in images. Obstructive backgrounds may be diminished or eliminated while weak signals are optimized by the use of algorithms including Fast Fourier Transform, Histogram Equalization and Image Subtraction. An added benefit is the speed with which these processes are completed and the results known. The efficacy of forensic image enhancement is illustrated through case applications.

Infrared spectroscopy and spectroscopic imaging in forensic science.

PubMed

Ewing, Andrew V; Kazarian, Sergei G

2017-01-16

Infrared spectroscopy and spectroscopic imaging, are robust, label free and inherently non-destructive methods with a high chemical specificity and sensitivity that are frequently employed in forensic science research and practices. This review aims to discuss the applications and recent developments of these methodologies in this field. Furthermore, the use of recently emerged Fourier transform infrared (FT-IR) spectroscopic imaging in transmission, external reflection and Attenuated Total Reflection (ATR) modes are summarised with relevance and potential for forensic science applications. This spectroscopic imaging approach provides the opportunity to obtain the chemical composition of fingermarks and information about possible contaminants deposited at a crime scene. Research that demonstrates the great potential of these techniques for analysis of fingerprint residues, explosive materials and counterfeit drugs will be reviewed. The implications of this research for the examination of different materials are considered, along with an outlook of possible future research avenues for the application of vibrational spectroscopic methods to the analysis of forensic samples.

The prevalence of encoded digital trace evidence in the nonfile space of computer media(,) (.).

PubMed

Garfinkel, Simson L

2014-09-01

Forensically significant digital trace evidence that is frequently present in sectors of digital media not associated with allocated or deleted files. Modern digital forensic tools generally do not decompress such data unless a specific file with a recognized file type is first identified, potentially resulting in missed evidence. Email addresses are encoded differently for different file formats. As a result, trace evidence can be categorized as Plain in File (PF), Encoded in File (EF), Plain Not in File (PNF), or Encoded Not in File (ENF). The tool bulk_extractor finds all of these formats, but other forensic tools do not. A study of 961 storage devices purchased on the secondary market and shows that 474 contained encoded email addresses that were not in files (ENF). Different encoding formats are the result of different application programs that processed different kinds of digital trace evidence. Specific encoding formats explored include BASE64, GZIP, PDF, HIBER, and ZIP. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Journal of Forensic Sciences published by Wiley Periodicals, Inc. on behalf of American Academy of Forensic Sciences.

A novel cell culture model as a tool for forensic biology experiments and validations.

PubMed

Feine, Ilan; Shpitzen, Moshe; Roth, Jonathan; Gafny, Ron

2016-09-01

To improve and advance DNA forensic casework investigation outcomes, extensive field and laboratory experiments are carried out in a broad range of relevant branches, such as touch and trace DNA, secondary DNA transfer and contamination confinement. Moreover, the development of new forensic tools, for example new sampling appliances, by commercial companies requires ongoing validation and assessment by forensic scientists. A frequent challenge in these kinds of experiments and validations is the lack of a stable, reproducible and flexible biological reference material. As a possible solution, we present here a cell culture model based on skin-derived human dermal fibroblasts. Cultured cells were harvested, quantified and dried on glass slides. These slides were used in adhesive tape-lifting experiments and tests of DNA crossover confinement by UV irradiation. The use of this model enabled a simple and concise comparison between four adhesive tapes, as well as a straightforward demonstration of the effect of UV irradiation intensities on DNA quantity and degradation. In conclusion, we believe this model has great potential to serve as an efficient research tool in forensic biology. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Tampered Region Localization of Digital Color Images Based on JPEG Compression Noise

NASA Astrophysics Data System (ADS)

Wang, Wei; Dong, Jing; Tan, Tieniu

With the availability of various digital image edit tools, seeing is no longer believing. In this paper, we focus on tampered region localization for image forensics. We propose an algorithm which can locate tampered region(s) in a lossless compressed tampered image when its unchanged region is output of JPEG decompressor. We find the tampered region and the unchanged region have different responses for JPEG compression. The tampered region has stronger high frequency quantization noise than the unchanged region. We employ PCA to separate different spatial frequencies quantization noises, i.e. low, medium and high frequency quantization noise, and extract high frequency quantization noise for tampered region localization. Post-processing is involved to get final localization result. The experimental results prove the effectiveness of our proposed method.

Screening for Offenders with an Intellectual Disability: The Validity of the Learning Disability Screening Questionnaire

ERIC Educational Resources Information Center

McKenzie, Karen; Michie, Amanda; Murray, Aja; Hales, Charlene

2012-01-01

The study assessed the validity of an intellectual disability screening tool, the Learning Disability Screening Questionnaire (LDSQ), in three forensic settings: a community intellectual disability forensic service; a forensic in-patient secure unit and a prison, using data for 94 individuals. A significant positive relationship was found between…

Surface-assisted laser desorption ionization mass spectrometry techniques for application in forensics.

PubMed

Guinan, Taryn; Kirkbride, Paul; Pigou, Paul E; Ronci, Maurizio; Kobus, Hilton; Voelcker, Nicolas H

2015-01-01

Matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) is an excellent analytical technique for the rapid and sensitive analysis of macromolecules (>700 Da), such as peptides, proteins, nucleic acids, and synthetic polymers. However, the detection of smaller organic molecules with masses below 700 Da using MALDI-MS is challenging due to the appearance of matrix adducts and matrix fragment peaks in the same spectral range. Recently, nanostructured substrates have been developed that facilitate matrix-free laser desorption ionization (LDI), contributing to an emerging analytical paradigm referred to as surface-assisted laser desorption ionization (SALDI) MS. Since SALDI enables the detection of small organic molecules, it is rapidly growing in popularity, including in the field of forensics. At the same time, SALDI also holds significant potential as a high throughput analytical tool in roadside, work place and athlete drug testing. In this review, we discuss recent advances in SALDI techniques such as desorption ionization on porous silicon (DIOS), nano-initiator mass spectrometry (NIMS) and nano assisted laser desorption ionization (NALDI™) and compare their strengths and weaknesses with particular focus on forensic applications. These include the detection of illicit drug molecules and their metabolites in biological matrices and small molecule detection from forensic samples including banknotes and fingerprints. Finally, the review highlights recent advances in mass spectrometry imaging (MSI) using SALDI techniques. © 2014 Wiley Periodicals, Inc.

Nuclear Forensics Applications of Principal Component Analysis on Micro X-ray Fluorescence Images

DTIC Science & Technology

analysis on quantified micro x-ray fluorescence intensity values. This method is then applied to address goals of nuclear forensics . Thefirst...researchers in the development and validation of nuclear forensics methods. A method for determining material homogeneity is developed and demonstrated

Camera-Model Identification Using Markovian Transition Probability Matrix

NASA Astrophysics Data System (ADS)

Xu, Guanshuo; Gao, Shang; Shi, Yun Qing; Hu, Ruimin; Su, Wei

Detecting the (brands and) models of digital cameras from given digital images has become a popular research topic in the field of digital forensics. As most of images are JPEG compressed before they are output from cameras, we propose to use an effective image statistical model to characterize the difference JPEG 2-D arrays of Y and Cb components from the JPEG images taken by various camera models. Specifically, the transition probability matrices derived from four different directional Markov processes applied to the image difference JPEG 2-D arrays are used to identify statistical difference caused by image formation pipelines inside different camera models. All elements of the transition probability matrices, after a thresholding technique, are directly used as features for classification purpose. Multi-class support vector machines (SVM) are used as the classification tool. The effectiveness of our proposed statistical model is demonstrated by large-scale experimental results.

Forensic 3D Visualization of CT Data Using Cinematic Volume Rendering: A Preliminary Study.

PubMed

Ebert, Lars C; Schweitzer, Wolf; Gascho, Dominic; Ruder, Thomas D; Flach, Patricia M; Thali, Michael J; Ampanozi, Garyfalia

2017-02-01

The 3D volume-rendering technique (VRT) is commonly used in forensic radiology. Its main function is to explain medical findings to state attorneys, judges, or police representatives. New visualization algorithms permit the generation of almost photorealistic volume renderings of CT datasets. The objective of this study is to present and compare a variety of radiologic findings to illustrate the differences between and the advantages and limitations of the current VRT and the physically based cinematic rendering technique (CRT). Seventy volunteers were shown VRT and CRT reconstructions of 10 different cases. They were asked to mark the findings on the images and rate them in terms of realism and understandability. A total of 48 of the 70 questionnaires were returned and included in the analysis. On the basis of most of the findings presented, CRT appears to be equal or superior to VRT with respect to the realism and understandability of the visualized findings. Overall, in terms of realism, the difference between the techniques was statistically significant (p < 0.05). Most participants perceived the CRT findings to be more understandable than the VRT findings, but that difference was not statistically significant (p > 0.05). CRT, which is similar to conventional VRT, is not primarily intended for diagnostic radiologic image analysis, and therefore it should be used primarily as a tool to deliver visual information in the form of radiologic image reports. Using CRT for forensic visualization might have advantages over using VRT if conveying a high degree of visual realism is of importance. Most of the shortcomings of CRT have to do with the software being an early prototype.

The development of a tool for assessing the quality of closed circuit camera footage for use in forensic gait analysis.

PubMed

Birch, Ivan; Vernon, Wesley; Walker, Jeremy; Saxelby, Jai

2013-10-01

Gait analysis from closed circuit camera footage is now commonly used as evidence in criminal trials. The biomechanical analysis of human gait is a well established science in both clinical and laboratory settings. However, closed circuit camera footage is rarely of the quality of that taken in the more controlled clinical and laboratory environments. The less than ideal quality of much of this footage for use in gait analysis is associated with a range of issues, the combination of which can often render the footage unsuitable for use in gait analysis. The aim of this piece of work was to develop a tool for assessing the suitability of closed circuit camera footage for the purpose of forensic gait analysis. A Delphi technique was employed with a small sample of expert forensic gait analysis practitioners, to identify key quality elements of CCTV footage used in legal proceedings. Five elements of the footage were identified and then subdivided into 15 contributing sub-elements, each of which was scored using a 5-point Likert scale. A Microsoft Excel worksheet was developed to calculate automatically an overall score from the fifteen sub-element scores. Five expert witnesses experienced in using CCTV footage for gait analysis then trialled the prototype tool on current case footage. A repeatability study was also undertaken using standardized CCTV footage. The results showed the tool to be a simple and repeatable means of assessing the suitability of closed circuit camera footage for use in forensic gait analysis. The inappropriate use of poor quality footage could lead to challenges to the practice of forensic gait analysis. All parties involved in criminal proceedings must therefore understand the fitness for purpose of any footage used. The development of this tool could offer a method of achieving this goal, and help to assure the continued role of forensic gait analysis as an aid to the identification process. Copyright © 2013 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

The risks, needs and stages of recovery of a complete forensic patient cohort in an Australian state.

PubMed

Adams, Jonathon; Thomas, Stuart D M; Mackinnon, Tobias; Eggleton, Damien

2018-02-07

Routine outcome measures are increasingly being mandated across mental health services in Australia and overseas. This requirement includes forensic mental health services, but their utility in such specialist services and the inter-relationships between the measures remain unclear. This study sought to characterise the risks, needs and stages of recovery of an entire cohort of forensic patients in one jurisdiction in Australia. Local expert groups, comprising of members of the forensic patient treating teams, were formed to gather information about the status and needs of all forensic patients in the State of New South Wales, Australia. The expert groups provided demographic information and completed three assessment tools concerning the risks, needs and stages of recovery of each forensic patient. The cohort of 327 forensic patients in NSW appears to be typical of forensic mental health service populations internationally when considering factors such as gender, diagnosis, and index offence. A number of important differences across the three structured tools for forensic patients in different levels of secure service provision are presented. The DUNDRUM Quartet demonstrated interesting findings, particularly in terms of the therapeutic security needs, the treatment completion, and the stages of recovery for the forensic patients in the community. The CANFOR highlighted the level of needs across the forensic patient population, whilst the HCR-20 data showed there was no significant difference in the mean clinical and risk management scores between male forensic patients across levels of security. To the authors' knowledge this is the first study of its kind in New South Wales, Australia. We have demonstrated the utility of using a suite of measures to evaluate the risks, needs, and stages of recovery for an entire cohort of forensic patients. The data set helps inform service planning and development, together with providing various avenues for future research.

Developing a Forensic Approach to Process Improvement: The Relationship between Curriculum and Impact in Frontline Operator Education

ERIC Educational Resources Information Center

Croom, Simon; Betts, Alan

2011-01-01

The authors present a comparative study of 2 in-company educational programs aimed at developing frontline operator capabilities in forensic methods. They discuss the relationship between the application of various forensic tools and conceptual techniques, the process (i.e., curriculum) for developing employee knowledge and capability, and the…

A Term Project for a Course on Computer Forensics

ERIC Educational Resources Information Center

Harrison, Warren

2006-01-01

The typical approach to creating an examination disk for exercises and projects in a course on computer forensics is for the instructor to populate a piece of media with evidence to be retrieved. While such an approach supports the simple use of forensic tools, in many cases the use of an instructor-developed examination disk avoids utilizing some…

Synergistic Role of Newer Techniques for Forensic and Postmortem CT Examinations.

PubMed

Blum, Alain; Kolopp, Martin; Teixeira, Pedro Gondim; Stroud, Tyler; Noirtin, Philippe; Coudane, Henry; Martrille, Laurent

2018-04-30

The aim of this article is to provide an overview of newer techniques and postprocessing tools that improve the potential impact of CT in forensic situations. CT has become a standard tool in medicolegal practice. Postmortem CT is an essential aid to the pathologist during autopsies. Advances in technology and software are constantly leading to advances in its performance.

A review of the changing culture and social context relating to forensic facial depiction of the dead.

PubMed

Wilkinson, Caroline

2014-12-01

The recognition of a decedent by a family member is commonplace in forensic investigation and is often employed as identity confirmation. However, it is recognised that misidentification from facial recognition is also common and faces of the dead may be extremely difficult to recognise due to decomposition or external damage, and even immediate post-mortem changes may be significant enough to confuse an observer. The depiction of faces of the dead can be a useful tool for promoting recognition leading to identification and post-mortem facial depiction is described as the interpretation of human remains in order to suggest the living appearance of an individual. This paper provides an historical context relating to the changing view of society to the presentation and publication of post-mortem facial depictions and discusses the current ethical, practical and academic challenges associated with these images. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Digital image forensics for photographic copying

NASA Astrophysics Data System (ADS)

Yin, Jing; Fang, Yanmei

2012-03-01

Image display technology has greatly developed over the past few decades, which make it possible to recapture high-quality images from the display medium, such as a liquid crystal display(LCD) screen or a printed paper. The recaptured images are not regarded as a separate image class in the current research of digital image forensics, while the content of the recaptured images may have been tempered. In this paper, two sets of features based on the noise and the traces of double JPEG compression are proposed to identify these recaptured images. Experimental results showed that our proposed features perform well for detecting photographic copying.

Forensic odontology as a victim identification tool in mass disasters: A feasibility study in the Indian scenario

PubMed Central

Sengupta, Shamindra; Sharma, Vandana; Gupta, Vineeta; Vij, Hitesh; Vij, Ruchieka; Prabhat, Kanika

2014-01-01

Aim: The aim of this study was to evaluate the awareness of practicing dentists about the subject of forensic odontology and to assess their willingness to maintain and share patient records. Materials and Methods: A blind questionnaire survey was carried out among 100 randomly selected practicing dentists in district Ghaziabad, Uttar Pradesh. Results: Most of the dentists interviewed were familiar with the subject of forensic odontology and its relation to dentistry, despite forensic dentistry having been newly introduced since 2007 into the undergraduate dental curriculum in India. However, dental records are maintained by only a few dentists, and only a very small percentage of them reported to have shared records, which may have helped in the identification of victims in a mass disaster. Conclusion: The result of our survey concluded that more awareness needs to be developed among practicing dentists regarding maintaining and sharing patient records for forensic odontology to succeed as a victim identification tool. PMID:24695834

A new mathematical modelling based shape extraction technique for Forensic Odontology.

PubMed

G, Jaffino; A, Banumathi; Gurunathan, Ulaganathan; B, Vijayakumari; J, Prabin Jose

2017-04-01

Forensic Odontology is a specific means for identifying a person in which deceased, and particularly in fatality incidents. The algorithm can be proposed to identify a person by comparing both postmortem (PM) and antemortem (AM) dental radiographs and photographs. This work aims to introduce a new mathematical algorithm for photographs in addition with radiographs. Isoperimetric graph partitioning method is used to extract the shape of dental images in forensic identification. Shape matching is done by comparing AM and PM dental images using both similarity and distance measures. Experimental results prove that the higher matching distance is observed by distance metric rather than similarity measures. The results of this algorithm show that a high hit rate is observed for distance based performance measures and it is well suited for forensic odontologist to identify a person. Copyright © 2017 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Toward a general ontology for digital forensic disciplines.

PubMed

Karie, Nickson M; Venter, Hein S

2014-09-01

Ontologies are widely used in different disciplines as a technique for representing and reasoning about domain knowledge. However, despite the widespread ontology-related research activities and applications in different disciplines, the development of ontologies and ontology research activities is still wanting in digital forensics. This paper therefore presents the case for establishing an ontology for digital forensic disciplines. Such an ontology would enable better categorization of the digital forensic disciplines, as well as assist in the development of methodologies and specifications that can offer direction in different areas of digital forensics. This includes such areas as professional specialization, certifications, development of digital forensic tools, curricula, and educational materials. In addition, the ontology presented in this paper can be used, for example, to better organize the digital forensic domain knowledge and explicitly describe the discipline's semantics in a common way. Finally, this paper is meant to spark discussions and further research on an internationally agreed ontological distinction of the digital forensic disciplines. Digital forensic disciplines ontology is a novel approach toward organizing the digital forensic domain knowledge and constitutes the main contribution of this paper. © 2014 American Academy of Forensic Sciences.

Risk assessment tools in criminal justice and forensic psychiatry: The need for better data.

PubMed

Douglas, T; Pugh, J; Singh, I; Savulescu, J; Fazel, S

2017-05-01

Violence risk assessment tools are increasingly used within criminal justice and forensic psychiatry, however there is little relevant, reliable and unbiased data regarding their predictive accuracy. We argue that such data are needed to (i) prevent excessive reliance on risk assessment scores, (ii) allow matching of different risk assessment tools to different contexts of application, (iii) protect against problematic forms of discrimination and stigmatisation, and (iv) ensure that contentious demographic variables are not prematurely removed from risk assessment tools. Copyright © 2016 The Author(s). Published by Elsevier Masson SAS.. All rights reserved.

Forensic Science Research and Development at the National Institute of Justice: Opportunities in Applied Physics

NASA Astrophysics Data System (ADS)

Dutton, Gregory

Forensic science is a collection of applied disciplines that draws from all branches of science. A key question in forensic analysis is: to what degree do a piece of evidence and a known reference sample share characteristics? Quantification of similarity, estimation of uncertainty, and determination of relevant population statistics are of current concern. A 2016 PCAST report questioned the foundational validity and the validity in practice of several forensic disciplines, including latent fingerprints, firearms comparisons and DNA mixture interpretation. One recommendation was the advancement of objective, automated comparison methods based on image analysis and machine learning. These concerns parallel the National Institute of Justice's ongoing R&D investments in applied chemistry, biology and physics. NIJ maintains a funding program spanning fundamental research with potential for forensic application to the validation of novel instruments and methods. Since 2009, NIJ has funded over 179M in external research to support the advancement of accuracy, validity and efficiency in the forensic sciences. An overview of NIJ's programs will be presented, with examples of relevant projects from fluid dynamics, 3D imaging, acoustics, and materials science.

Generating a Corpus of Mobile Forensic Images for Masquerading user Experimentation.

PubMed

Guido, Mark; Brooks, Marc; Grover, Justin; Katz, Eric; Ondricek, Jared; Rogers, Marcus; Sharpe, Lauren

2016-11-01

The Periodic Mobile Forensics (PMF) system investigates user behavior on mobile devices. It applies forensic techniques to an enterprise mobile infrastructure, utilizing an on-device agent named TractorBeam. The agent collects changed storage locations for later acquisition, reconstruction, and analysis. TractorBeam provides its data to an enterprise infrastructure that consists of a cloud-based queuing service, relational database, and analytical framework for running forensic processes. During a 3-month experiment with Purdue University, TractorBeam was utilized in a simulated operational setting across 34 users to evaluate techniques to identify masquerading users (i.e., users other than the intended device user). The research team surmises that all masqueraders are undesirable to an enterprise, even when a masquerader lacks malicious intent. The PMF system reconstructed 821 forensic images, extracted one million audit events, and accurately detected masqueraders. Evaluation revealed that developed methods reduced storage requirements 50-fold. This paper describes the PMF architecture, performance of TractorBeam throughout the protocol, and results of the masquerading user analysis. © 2016 American Academy of Forensic Sciences.

A ranking index for quality assessment of forensic DNA profiles forensic DNA profiles

PubMed Central

2010-01-01

Background Assessment of DNA profile quality is vital in forensic DNA analysis, both in order to determine the evidentiary value of DNA results and to compare the performance of different DNA analysis protocols. Generally the quality assessment is performed through manual examination of the DNA profiles based on empirical knowledge, or by comparing the intensities (allelic peak heights) of the capillary electrophoresis electropherograms. Results We recently developed a ranking index for unbiased and quantitative quality assessment of forensic DNA profiles, the forensic DNA profile index (FI) (Hedman et al. Improved forensic DNA analysis through the use of alternative DNA polymerases and statistical modeling of DNA profiles, Biotechniques 47 (2009) 951-958). FI uses electropherogram data to combine the intensities of the allelic peaks with the balances within and between loci, using Principal Components Analysis. Here we present the construction of FI. We explain the mathematical and statistical methodologies used and present details about the applied data reduction method. Thereby we show how to adapt the ranking index for any Short Tandem Repeat-based forensic DNA typing system through validation against a manual grading scale and calibration against a specific set of DNA profiles. Conclusions The developed tool provides unbiased quality assessment of forensic DNA profiles. It can be applied for any DNA profiling system based on Short Tandem Repeat markers. Apart from crime related DNA analysis, FI can therefore be used as a quality tool in paternal or familial testing as well as in disaster victim identification. PMID:21062433

Forensic Science and the Internet - Current Utilization and Future Potential.

PubMed

Chamakura, R P

1997-12-01

The Internet has become a very powerful and inexpensive tool for the free distribution of knowledge and information. It is a learning and research tool, a virtual library without borders and membership requirements, a help desk, and a publication house providing newspapers with current information and journals with instant publication. Very soon, when live audio and video transmission is perfected, the Internet (popularly referred to as the Net) also will be a live classroom and everyday conference site. This article provides a brief overview of the basic structure and essential components of the Internet. A limited number of home pages/Web sites that are already made available on the Net by scientists, laboratories, and colleges in the forensic science community are presented in table forms. Home pages/Web sites containing useful information pertinent to different disciplines of forensic science are also categorized in various tables. The ease and benefits of the Internet use are exemplified by the author's personal experience. Currently, only a few forensic scientists and institutions have made their presence felt. More participation and active contribution and the creation of on-line searchable databases in all specialties of forensic science are urgently needed. Leading forensic journals should take the lead and create on-line searchable indexes with abstracts. Creating Internet repositories of unpublished papers is an idea worth looking into. Leading forensic science institutions should also develop use of the Net to provide training and retraining opportunities for forensic scientists. Copyright © 1997 Central Police University.

Forensic applications of chemical imaging: latent fingerprint detection using visible absorption and luminescence.

PubMed

Exline, David L; Wallace, Christie; Roux, Claude; Lennard, Chris; Nelson, Matthew P; Treado, Patrick J

2003-09-01

Chemical imaging technology is a rapid examination technique that combines molecular spectroscopy and digital imaging, providing information on morphology, composition, structure, and concentration of a material. Among many other applications, chemical imaging offers an array of novel analytical testing methods, which limits sample preparation and provides high-quality imaging data essential in the detection of latent fingerprints. Luminescence chemical imaging and visible absorbance chemical imaging have been successfully applied to ninhydrin, DFO, cyanoacrylate, and luminescent dye-treated latent fingerprints, demonstrating the potential of this technology to aid forensic investigations. In addition, visible absorption chemical imaging has been applied successfully to visualize untreated latent fingerprints.

Forensic analysis of explosions: Inverse calculation of the charge mass.

PubMed

van der Voort, M M; van Wees, R M M; Brouwer, S D; van der Jagt-Deutekom, M J; Verreault, J

2015-07-01

Forensic analysis of explosions consists of determining the point of origin, the explosive substance involved, and the charge mass. Within the EU FP7 project Hyperion, TNO developed the Inverse Explosion Analysis (TNO-IEA) tool to estimate the charge mass and point of origin based on observed damage around an explosion. In this paper, inverse models are presented based on two frequently occurring and reliable sources of information: window breakage and building damage. The models have been verified by applying them to the Enschede firework disaster and the Khobar tower attack. Furthermore, a statistical method has been developed to combine the various types of data, in order to determine an overall charge mass distribution. In relatively open environments, like for the Enschede firework disaster, the models generate realistic charge masses that are consistent with values found in forensic literature. The spread predicted by the IEA tool is however larger than presented in the literature for these specific cases. This is also realistic due to the large inherent uncertainties in a forensic analysis. The IEA-models give a reasonable first order estimate of the charge mass in a densely built urban environment, such as for the Khobar tower attack. Due to blast shielding effects which are not taken into account in the IEA tool, this is usually an under prediction. To obtain more accurate predictions, the application of Computational Fluid Dynamics (CFD) simulations is advised. The TNO IEA tool gives unique possibilities to inversely calculate the TNT equivalent charge mass based on a large variety of explosion effects and observations. The IEA tool enables forensic analysts, also those who are not experts on explosion effects, to perform an analysis with a largely reduced effort. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Forensic analysis of latent fingermarks by silver-assisted LDI imaging MS on nonconductive surfaces.

PubMed

Lauzon, N; Dufresne, M; Beaudoin, A; Chaurand, P

2017-06-01

Silver-assisted laser desorption ionization (AgLDI) imaging mass spectrometry (IMS) has been demonstrated to be a useful technology for fingermark analysis allowing for the detection of several classes of endogenous as well as exogenous compounds. Ideally, in IMS analyses, the fingermarks are deposited under controlled conditions on metallized conductive target slides. However, in forensic investigations, fingermarks are often found on a variety of nonconductive surfaces. A sputtered silver layer renders the target surface conductive, which allows the analyses of insulating surfaces by time-of-flight IMS. Ultimately, the major consideration when developing analytical methods for the analysis of latent fingermarks is their capability to be incorporated within forensic standard operational procedures. To demonstrate the potential of AgLDI IMS for forensic applications, fingermarks deposited on nonconductive surfaces commonly found during an investigation, including paper, cardboard, plastic bags and lifting tape, were first revealed by the Sûreté du Québec by using forensic enhancement techniques prior to the IMS analyses. Numerous endogenous compounds including fatty acids, cholesterol, squalene, wax esters, triglycerides and several exogenous substances were detected and imaged. Here, we show that silver sputtering can provide visual enhancements of fingerprint patterns after FET procedures through different scenarios in which AgLDI IMS can contribute to forensic investigations. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Google Glass for Documentation of Medical Findings: Evaluation in Forensic Medicine

PubMed Central

2014-01-01

Background Google Glass is a promising premarket device that includes an optical head-mounted display. Several proof of concept reports exist, but there is little scientific evidence regarding its use in a medical setting. Objective The objective of this study was to empirically determine the feasibility of deploying Glass in a forensics setting. Methods Glass was used in combination with a self-developed app that allowed for hands-free operation during autopsy and postmortem examinations of 4 decedents performed by 2 physicians. A digital single-lens reflex (DSLR) camera was used for image comparison. In addition, 6 forensic examiners (3 male, 3 female; age range 23-48 years, age mean 32.8 years, SD 9.6; mean work experience 6.2 years, SD 8.5) were asked to evaluate 159 images for image quality on a 5-point Likert scale, specifically color discrimination, brightness, sharpness, and their satisfaction with the acquired region of interest. Statistical evaluations were performed to determine how Glass compares with conventionally acquired digital images. Results All images received good (median 4) and very good ratings (median 5) for all 4 categories. Autopsy images taken by Glass (n=32) received significantly lower ratings than those acquired by DSLR camera (n=17) (region of interest: z=–5.154, P<.001; sharpness: z=–7.898, P<.001; color: z=–4.407, P<.001, brightness: z=–3.187, P=.001). For 110 images of postmortem examinations (Glass: n=54, DSLR camera: n=56), ratings for region of interest (z=–8.390, P<.001) and brightness (z=–540, P=.007) were significantly lower. For interrater reliability, intraclass correlation (ICC) values were good for autopsy (ICC=.723, 95% CI .667-.771, P<.001) and postmortem examination (ICC=.758, 95% CI .727-.787, P<.001). Postmortem examinations performed using Glass took 42.6 seconds longer than those done with the DSLR camera (z=–2.100, P=.04 using Wilcoxon signed rank test). The battery charge of Glass quickly decreased; an average 5.5% (SD 1.85) of its battery capacity was spent per postmortem examination (0.81% per minute or 0.79% per picture). Conclusions Glass was efficient for acquiring images for documentation in forensic medicine, but the image quality was inferior compared to a DSLR camera. Images taken with Glass received significantly lower ratings for all 4 categories in an autopsy setting and for region of interest and brightness in postmortem examination. The effort necessary for achieving the objectives was higher when using the device compared to the DSLR camera thus extending the postmortem examination duration. Its relative high power consumption and low battery capacity is also a disadvantage. At the current stage of development, Glass may be an adequate tool for education. For deployment in clinical care, issues such as hygiene, data protection, and privacy need to be addressed and are currently limiting chances for professional use. PMID:24521935

Google Glass for documentation of medical findings: evaluation in forensic medicine.

PubMed

Albrecht, Urs-Vito; von Jan, Ute; Kuebler, Joachim; Zoeller, Christoph; Lacher, Martin; Muensterer, Oliver J; Ettinger, Max; Klintschar, Michael; Hagemeier, Lars

2014-02-12

Google Glass is a promising premarket device that includes an optical head-mounted display. Several proof of concept reports exist, but there is little scientific evidence regarding its use in a medical setting. The objective of this study was to empirically determine the feasibility of deploying Glass in a forensics setting. Glass was used in combination with a self-developed app that allowed for hands-free operation during autopsy and postmortem examinations of 4 decedents performed by 2 physicians. A digital single-lens reflex (DSLR) camera was used for image comparison. In addition, 6 forensic examiners (3 male, 3 female; age range 23-48 years, age mean 32.8 years, SD 9.6; mean work experience 6.2 years, SD 8.5) were asked to evaluate 159 images for image quality on a 5-point Likert scale, specifically color discrimination, brightness, sharpness, and their satisfaction with the acquired region of interest. Statistical evaluations were performed to determine how Glass compares with conventionally acquired digital images. All images received good (median 4) and very good ratings (median 5) for all 4 categories. Autopsy images taken by Glass (n=32) received significantly lower ratings than those acquired by DSLR camera (n=17) (region of interest: z=-5.154, P<.001; sharpness: z=-7.898, P<.001; color: z=-4.407, P<.001, brightness: z=-3.187, P=.001). For 110 images of postmortem examinations (Glass: n=54, DSLR camera: n=56), ratings for region of interest (z=-8.390, P<.001) and brightness (z=-540, P=.007) were significantly lower. For interrater reliability, intraclass correlation (ICC) values were good for autopsy (ICC=.723, 95% CI .667-.771, P<.001) and postmortem examination (ICC=.758, 95% CI .727-.787, P<.001). Postmortem examinations performed using Glass took 42.6 seconds longer than those done with the DSLR camera (z=-2.100, P=.04 using Wilcoxon signed rank test). The battery charge of Glass quickly decreased; an average 5.5% (SD 1.85) of its battery capacity was spent per postmortem examination (0.81% per minute or 0.79% per picture). Glass was efficient for acquiring images for documentation in forensic medicine, but the image quality was inferior compared to a DSLR camera. Images taken with Glass received significantly lower ratings for all 4 categories in an autopsy setting and for region of interest and brightness in postmortem examination. The effort necessary for achieving the objectives was higher when using the device compared to the DSLR camera thus extending the postmortem examination duration. Its relative high power consumption and low battery capacity is also a disadvantage. At the current stage of development, Glass may be an adequate tool for education. For deployment in clinical care, issues such as hygiene, data protection, and privacy need to be addressed and are currently limiting chances for professional use.

Present and foreseeable future of metabolomics in forensic analysis.

PubMed

Castillo-Peinado, L S; Luque de Castro, M D

2016-06-21

The revulsive publications during the last years on the precariousness of forensic sciences worldwide have promoted the move of major steps towards improvement of this science. One of the steps (viz. a higher involvement of metabolomics in the new era of forensic analysis) deserves to be discussed under different angles. Thus, the characteristics of metabolomics that make it a useful tool in forensic analysis, the aspects in which this omics is so far implicit, but not mentioned in forensic analyses, and how typical forensic parameters such as the post-mortem interval or fingerprints take benefits from metabolomics are critically discussed in this review. The way in which the metabolomics-forensic binomial succeeds when either conventional or less frequent samples are used is highlighted here. Finally, the pillars that should support future developments involving metabolomics and forensic analysis, and the research required for a fruitful in-depth involvement of metabolomics in forensic analysis are critically discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

Analysis of Forensic Casework Utilizing Infrared Spectroscopic Imaging.

PubMed

Lanzarotta, Adam

2016-02-24

A search of the current scientific literature yields a limited number of studies that describe the use of Fourier transform infrared (FT-IR) spectroscopic imaging for the analysis of forensic casework, which is likely due to the fact that these instruments are fairly new commodities to the field of analytical chemistry and are therefore not yet commonplace in forensic laboratories. This report describes recent forensic case studies that have used the technique for determining the composition of a wide variety of multi-component sample types, including animal tissue sections for toxic inclusions, drugs/dietary supplements, an antibiotic with an active pharmaceutical ingredient (API) present as several different salt forms, an adulterated bulk API, unknown trace powders for illicit drugs and an ophthalmic solution suspected of being adulterated with bleach.

Analysis of Forensic Casework Utilizing Infrared Spectroscopic Imaging †

PubMed Central

Lanzarotta, Adam

2016-01-01

A search of the current scientific literature yields a limited number of studies that describe the use of Fourier transform infrared (FT-IR) spectroscopic imaging for the analysis of forensic casework, which is likely due to the fact that these instruments are fairly new commodities to the field of analytical chemistry and are therefore not yet commonplace in forensic laboratories. This report describes recent forensic case studies that have used the technique for determining the composition of a wide variety of multi-component sample types, including animal tissue sections for toxic inclusions, drugs/dietary supplements, an antibiotic with an active pharmaceutical ingredient (API) present as several different salt forms, an adulterated bulk API, unknown trace powders for illicit drugs and an ophthalmic solution suspected of being adulterated with bleach. PMID:26927101

Use and interpretation of routine outcome measures in forensic mental health.

PubMed

Shinkfield, Gregg; Ogloff, James

2015-02-01

The present study aimed to both pilot a method of monitoring mental health nurses' use of routine outcome measures (ROM) and to examine the precision of ratings made with these tools within a forensic mental health environment. The audit protocol used in the present study was found to be effective in evaluating both the accuracy with which nurses were able to interpret ROM items and their degree of adherence with local procedures for completing such instruments. Moreover, the results suggest that despite these ROM having been developed for use in general mental health settings, they could be interpreted and rated with an adequate degree of reliability by nurses in a forensic mental health context. However, difficulties were observed in the applicability of several components of these tools within a forensic environment. Recommendations for future research and implications for practice are discussed. © 2014 Australian College of Mental Health Nurses Inc.

Applications of a digital darkroom in the forensic laboratory

NASA Astrophysics Data System (ADS)

Bullard, Barry D.; Birge, Brian

1997-02-01

Through a joint agreement with the Indiana-Marion County Forensic Laboratory Services Agency, the Institute for Forensic Imaging conducted a pilot program to investigate crime lab applications of a digital darkroom. IFI installed and staffed a state-of-the-art digital darkroom in the photography laboratory of the Indianapolis-Marion County crime lab located at Indianapolis, Indiana. The darkroom consisted of several high resolution color digital cameras, image processing computer, dye sublimation continuous tone digital printers, and CD-ROM writer. This paper describes the use of the digital darkroom in several crime lab investigations conducted during the program.

On the added value of forensic science and grand innovation challenges for the forensic community.

PubMed

van Asten, Arian C

2014-03-01

In this paper the insights and results are presented of a long term and ongoing improvement effort within the Netherlands Forensic Institute (NFI) to establish a valuable innovation programme. From the overall perspective of the role and use of forensic science in the criminal justice system, the concepts of Forensic Information Value Added (FIVA) and Forensic Information Value Efficiency (FIVE) are introduced. From these concepts the key factors determining the added value of forensic investigations are discussed; Evidential Value, Relevance, Quality, Speed and Cost. By unravelling the added value of forensic science and combining this with the future needs and scientific and technological developments, six forensic grand challenges are introduced: i) Molecular Photo-fitting; ii) chemical imaging, profiling and age estimation of finger marks; iii) Advancing Forensic Medicine; iv) Objective Forensic Evaluation; v) the Digital Forensic Service Centre and vi) Real time In-Situ Chemical Identification. Finally, models for forensic innovation are presented that could lead to major international breakthroughs on all these six themes within a five year time span. This could cause a step change in the added value of forensic science and would make forensic investigative methods even more valuable than they already are today. © 2013. Published by Elsevier Ireland Ltd on behalf of Forensic Science Society. All rights reserved.

Controlled electrostatic methodology for imaging indentations in documents.

PubMed

Yaraskavitch, Luke; Graydon, Matthew; Tanaka, Tobin; Ng, Lay-Keow

2008-05-20

The electrostatic process for imaging indentations on documents using the ESDA device is investigated under controlled experimental settings. An in-house modified commercial xerographic developer housing is used to control the uniformity and volume of toner deposition, allowing for reproducible image development. Along with this novel development tool, an electrostatic voltmeter and fixed environmental conditions facilitate an optimization process. Sample documents are preconditioned in a humidity cabinet with microprocessor control, and the significant benefit of humidification above 70% RH on image quality is verified. Improving on the subjective methods of previous studies, image quality analysis is carried out in an objective and reproducible manner using the PIAS-II. For the seven commercial paper types tested, the optimum ESDA operating point is found to be at an electric potential near -400V at the Mylar surface; however, for most paper types, the optimum operating regime is found to be quite broad, spanning relatively small electric potentials between -200 and -550V. At -400V, the film right above an indented area generally carries a voltage which is 30-50V less negative than the non-indented background. In contrast with Seward's findings [G.H. Seward, Model for electrostatic imaging of forensic evidence via discharge through Mylar-paper path, J. Appl. Phys. 83 (3) (1998) 1450-1456; G.H. Seward, Practical implications of the charge transport model for electrostatic detection apparatus (ESDA), J. Forensic Sci. 44 (4) (1999) 832-836], a period of charge decay before image development is not required when operating in this optimal regime. A brief investigation of the role played by paper-to-paper friction during the indentation process is conducted using our optimized development method.

Providing Cryptographic Security and Evidentiary Chain-of-Custody with the Advanced Forensic Format, Library, and Tools

DTIC Science & Technology

2008-08-19

1 hash of the page page%d sha256 The segment for the SHA256 hash of the page Bad Sector Management: badsectors The number of sectors in the image...written, AFFLIB can automatically compute the page’s MD5, SHA-1, and/or SHA256 hash and write an associated segment containing the hash value. The...are written into segments themselves, with the segment name being name/ sha256 where name is the original segment name sha256 is the hash algorithm used

A new approach for the analysis of facial growth and age estimation: Iris ratio

PubMed Central

Machado, Carlos Eduardo Palhares; Flores, Marta Regina Pinheiro; Lima, Laíse Nascimento Correia; Tinoco, Rachel Lima Ribeiro; Bezerra, Ana Cristina Barreto; Evison, Martin Paul; Guimarães, Marco Aurélio

2017-01-01

The study of facial growth is explored in many fields of science, including anatomy, genetics, and forensics. In the field of forensics, it acts as a valuable tool for combating child pornography. The present research proposes a new method, based on relative measurements and fixed references of the human face—specifically considering measurements of the diameter of the iris (iris ratio)—for the analysis of facial growth in association with age in children and sub-adults. The experimental sample consisted of digital photographs of 1000 Brazilian subjects, aged between 6 and 22 years, distributed equally by sex and divided into five specific age groups (6, 10, 14, 18, and 22 year olds ± one month). The software package SAFF-2D® (Forensic Facial Analysis System, Brazilian Federal Police, Brazil) was used for positioning 11 landmarks on the images. Ten measurements were calculated and used as fixed references to evaluate the growth of the other measurements for each age group, as well the accumulated growth (6–22 years old). The Intraclass Correlation Coefficient (ICC) was applied for the evaluation of intra-examiner and inter-examiner reliability within a specific set of images. Pearson’s Correlation Coefficient was used to assess the association between each measurement taken and the respective age groups. ANOVA and Post-hoc Tukey tests were used to search for statistical differences between the age groups. The outcomes indicated that facial structures grow with different timing in children and adolescents. Moreover, the growth allometry expressed in this study may be used to understand what structures have more or less proportional variation in function for the age ranges studied. The diameter of the iris was found to be the most stable measurement compared to the others and represented the best cephalometric measurement as a fixed reference for facial growth ratios (or indices). The method described shows promising potential for forensic applications, especially as part of the armamentarium against crimes involving child pornography and child abuse. PMID:28686631

A new approach for the analysis of facial growth and age estimation: Iris ratio.

PubMed

Machado, Carlos Eduardo Palhares; Flores, Marta Regina Pinheiro; Lima, Laíse Nascimento Correia; Tinoco, Rachel Lima Ribeiro; Franco, Ademir; Bezerra, Ana Cristina Barreto; Evison, Martin Paul; Guimarães, Marco Aurélio

2017-01-01

The study of facial growth is explored in many fields of science, including anatomy, genetics, and forensics. In the field of forensics, it acts as a valuable tool for combating child pornography. The present research proposes a new method, based on relative measurements and fixed references of the human face-specifically considering measurements of the diameter of the iris (iris ratio)-for the analysis of facial growth in association with age in children and sub-adults. The experimental sample consisted of digital photographs of 1000 Brazilian subjects, aged between 6 and 22 years, distributed equally by sex and divided into five specific age groups (6, 10, 14, 18, and 22 year olds ± one month). The software package SAFF-2D® (Forensic Facial Analysis System, Brazilian Federal Police, Brazil) was used for positioning 11 landmarks on the images. Ten measurements were calculated and used as fixed references to evaluate the growth of the other measurements for each age group, as well the accumulated growth (6-22 years old). The Intraclass Correlation Coefficient (ICC) was applied for the evaluation of intra-examiner and inter-examiner reliability within a specific set of images. Pearson's Correlation Coefficient was used to assess the association between each measurement taken and the respective age groups. ANOVA and Post-hoc Tukey tests were used to search for statistical differences between the age groups. The outcomes indicated that facial structures grow with different timing in children and adolescents. Moreover, the growth allometry expressed in this study may be used to understand what structures have more or less proportional variation in function for the age ranges studied. The diameter of the iris was found to be the most stable measurement compared to the others and represented the best cephalometric measurement as a fixed reference for facial growth ratios (or indices). The method described shows promising potential for forensic applications, especially as part of the armamentarium against crimes involving child pornography and child abuse.

Estimating JPEG2000 compression for image forensics using Benford's Law

NASA Astrophysics Data System (ADS)

Qadir, Ghulam; Zhao, Xi; Ho, Anthony T. S.

2010-05-01

With the tremendous growth and usage of digital images nowadays, the integrity and authenticity of digital content is becoming increasingly important, and a growing concern to many government and commercial sectors. Image Forensics, based on a passive statistical analysis of the image data only, is an alternative approach to the active embedding of data associated with Digital Watermarking. Benford's Law was first introduced to analyse the probability distribution of the 1st digit (1-9) numbers of natural data, and has since been applied to Accounting Forensics for detecting fraudulent income tax returns [9]. More recently, Benford's Law has been further applied to image processing and image forensics. For example, Fu et al. [5] proposed a Generalised Benford's Law technique for estimating the Quality Factor (QF) of JPEG compressed images. In our previous work, we proposed a framework incorporating the Generalised Benford's Law to accurately detect unknown JPEG compression rates of watermarked images in semi-fragile watermarking schemes. JPEG2000 (a relatively new image compression standard) offers higher compression rates and better image quality as compared to JPEG compression. In this paper, we propose the novel use of Benford's Law for estimating JPEG2000 compression for image forensics applications. By analysing the DWT coefficients and JPEG2000 compression on 1338 test images, the initial results indicate that the 1st digit probability of DWT coefficients follow the Benford's Law. The unknown JPEG2000 compression rates of the image can also be derived, and proved with the help of a divergence factor, which shows the deviation between the probabilities and Benford's Law. Based on 1338 test images, the mean divergence for DWT coefficients is approximately 0.0016, which is lower than DCT coefficients at 0.0034. However, the mean divergence for JPEG2000 images compression rate at 0.1 is 0.0108, which is much higher than uncompressed DWT coefficients. This result clearly indicates a presence of compression in the image. Moreover, we compare the results of 1st digit probability and divergence among JPEG2000 compression rates at 0.1, 0.3, 0.5 and 0.9. The initial results show that the expected difference among them could be used for further analysis to estimate the unknown JPEG2000 compression rates.

Detecting Copy Move Forgery In Digital Images

NASA Astrophysics Data System (ADS)

Gupta, Ashima; Saxena, Nisheeth; Vasistha, S. K.

2012-03-01

In today's world several image manipulation software's are available. Manipulation of digital images has become a serious problem nowadays. There are many areas like medical imaging, digital forensics, journalism, scientific publications, etc, where image forgery can be done very easily. To determine whether a digital image is original or doctored is a big challenge. To find the marks of tampering in a digital image is a challenging task. The detection methods can be very useful in image forensics which can be used as a proof for the authenticity of a digital image. In this paper we propose the method to detect region duplication forgery by dividing the image into overlapping block and then perform searching to find out the duplicated region in the image.

[Research Progress on Individual Identification Using Forensic Imaging Data under the Influence of Evidence Rule].

PubMed

Wang, J J; Pei, J C; Qiu, Y L

2016-10-01

With the progress and development of the DNA test and imaging technique, and the evolution of evidence rule which bring the discussions about whether the individual identification using imaging data is outdated, and other disputes such as whether radiologic evidence could be suitable for contemporary evidence and be used to solve the posture difference of imaging test. This article summaries the domestic and foreign researches of individual identification using imaging data in the past 20 years and reviews the problems above. Copyright© by the Editorial Department of Journal of Forensic Medicine.

A Novel Method for Block Size Forensics Based on Morphological Operations

NASA Astrophysics Data System (ADS)

Luo, Weiqi; Huang, Jiwu; Qiu, Guoping

Passive forensics analysis aims to find out how multimedia data is acquired and processed without relying on pre-embedded or pre-registered information. Since most existing compression schemes for digital images are based on block processing, one of the fundamental steps for subsequent forensics analysis is to detect the presence of block artifacts and estimate the block size for a given image. In this paper, we propose a novel method for blind block size estimation. A 2×2 cross-differential filter is first applied to detect all possible block artifact boundaries, morphological operations are then used to remove the boundary effects caused by the edges of the actual image contents, and finally maximum-likelihood estimation (MLE) is employed to estimate the block size. The experimental results evaluated on over 1300 nature images show the effectiveness of our proposed method. Compared with existing gradient-based detection method, our method achieves over 39% accuracy improvement on average.

Virtual autopsy using imaging: bridging radiologic and forensic sciences. A review of the Virtopsy and similar projects.

PubMed

Bolliger, Stephan A; Thali, Michael J; Ross, Steffen; Buck, Ursula; Naether, Silvio; Vock, Peter

2008-02-01

The transdisciplinary research project Virtopsy is dedicated to implementing modern imaging techniques into forensic medicine and pathology in order to augment current examination techniques or even to offer alternative methods. Our project relies on three pillars: three-dimensional (3D) surface scanning for the documentation of body surfaces, and both multislice computed tomography (MSCT) and magnetic resonance imaging (MRI) to visualise the internal body. Three-dimensional surface scanning has delivered remarkable results in the past in the 3D documentation of patterned injuries and of objects of forensic interest as well as whole crime scenes. Imaging of the interior of corpses is performed using MSCT and/or MRI. MRI, in addition, is also well suited to the examination of surviving victims of assault, especially choking, and helps visualise internal injuries not seen at external examination of the victim. Apart from the accuracy and three-dimensionality that conventional documentations lack, these techniques allow for the re-examination of the corpse and the crime scene even decades later, after burial of the corpse and liberation of the crime scene. We believe that this virtual, non-invasive or minimally invasive approach will improve forensic medicine in the near future.

Next generation sequencing (NGS): a golden tool in forensic toolkit.

PubMed

Aly, S M; Sabri, D M

The DNA analysis is a cornerstone in contemporary forensic sciences. DNA sequencing technologies are powerful tools that enrich molecular sciences in the past based on Sanger sequencing and continue to glowing these sciences based on Next generation sequencing (NGS). Next generation sequencing has excellent potential to flourish and increase the molecular applications in forensic sciences by jumping over the pitfalls of the conventional method of sequencing. The main advantages of NGS compared to conventional method that it utilizes simultaneously a large number of genetic markers with high-resolution of genetic data. These advantages will help in solving several challenges such as mixture analysis and dealing with minute degraded samples. Based on these new technologies, many markers could be examined to get important biological data such as age, geographical origins, tissue type determination, external visible traits and monozygotic twins identification. It also could get data related to microbes, insects, plants and soil which are of great medico-legal importance. Despite the dozens of forensic research involving NGS, there are requirements before using this technology routinely in forensic cases. Thus, there is a great need to more studies that address robustness of these techniques. Therefore, this work highlights the applications of forensic sciences in the era of massively parallel sequencing.

Parallel digital forensics infrastructure.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liebrock, Lorie M.; Duggan, David Patrick

2009-10-01

This report documents the architecture and implementation of a Parallel Digital Forensics infrastructure. This infrastructure is necessary for supporting the design, implementation, and testing of new classes of parallel digital forensics tools. Digital Forensics has become extremely difficult with data sets of one terabyte and larger. The only way to overcome the processing time of these large sets is to identify and develop new parallel algorithms for performing the analysis. To support algorithm research, a flexible base infrastructure is required. A candidate architecture for this base infrastructure was designed, instantiated, and tested by this project, in collaboration with New Mexicomore » Tech. Previous infrastructures were not designed and built specifically for the development and testing of parallel algorithms. With the size of forensics data sets only expected to increase significantly, this type of infrastructure support is necessary for continued research in parallel digital forensics. This report documents the implementation of the parallel digital forensics (PDF) infrastructure architecture and implementation.« less

Improved photo response non-uniformity (PRNU) based source camera identification.

PubMed

Cooper, Alan J

2013-03-10

The concept of using Photo Response Non-Uniformity (PRNU) as a reliable forensic tool to match an image to a source camera is now well established. Traditionally, the PRNU estimation methodologies have centred on a wavelet based de-noising approach. Resultant filtering artefacts in combination with image and JPEG contamination act to reduce the quality of PRNU estimation. In this paper, it is argued that the application calls for a simplified filtering strategy which at its base level may be realised using a combination of adaptive and median filtering applied in the spatial domain. The proposed filtering method is interlinked with a further two stage enhancement strategy where only pixels in the image having high probabilities of significant PRNU bias are retained. This methodology significantly improves the discrimination between matching and non-matching image data sets over that of the common wavelet filtering approach. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Postmortem computed tomography (PMCT) and disaster victim identification.

PubMed

Brough, A L; Morgan, B; Rutty, G N

2015-09-01

Radiography has been used for identification since 1927, and established a role in mass fatality investigations in 1949. More recently, postmortem computed tomography (PMCT) has been used for disaster victim identification (DVI). PMCT offers several advantages compared with fluoroscopy, plain film and dental X-rays, including: speed, reducing the number of on-site personnel and imaging modalities required, making it potentially more efficient. However, there are limitations that inhibit the international adoption of PMCT into routine practice. One particular problem is that due to the fact that forensic radiology is a relatively new sub-speciality, there are no internationally established standards for image acquisition, image interpretation and archiving. This is reflected by the current INTERPOL DVI form, which does not contain a PMCT section. The DVI working group of the International Society of Forensic Radiology and Imaging supports the use of imaging in mass fatality response and has published positional statements in this area. This review will discuss forensic radiology, PMCT, and its role in disaster victim identification.

Measurement of Postmortem Pupil Size: A New Method with Excellent Reliability and Its Application to Pupil Changes in the Early Postmortem Period.

PubMed

Fleischer, Luise; Sehner, Susanne; Gehl, Axel; Riemer, Martin; Raupach, Tobias; Anders, Sven

2017-05-01

Measurement of postmortem pupil width is a potential component of death time estimation. However, no standardized measurement method has been described. We analyzed a total of 71 digital images for pupil-iris ratio using the software ImageJ. Images were analyzed three times by four different examiners. In addition, serial images from 10 cases were taken between 2 and 50 h postmortem to detect spontaneous pupil changes. Intra- and inter-rater reliability of the method was excellent (ICC > 0.95). The method is observer independent and yields consistent results, and images can be digitally stored and re-evaluated. The method seems highly eligible for forensic and scientific purposes. While statistical analysis of spontaneous pupil changes revealed a significant polynomial of quartic degree for postmortem time (p = 0.001), an obvious pattern was not detected. These results do not indicate suitability of spontaneous pupil changes for forensic death time estimation, as formerly suggested. © 2016 American Academy of Forensic Sciences.

Format preferences of district attorneys for post-mortem medical imaging reports: understandability, cost effectiveness, and suitability for the courtroom: a questionnaire based study.

PubMed

Ampanozi, Garyfalia; Zimmermann, David; Hatch, Gary M; Ruder, Thomas D; Ross, Steffen; Flach, Patricia M; Thali, Michael J; Ebert, Lars C

2012-05-01

The objective of this study was to explore the perception of the legal authorities regarding different report types and visualization techniques for post-mortem radiological findings. A standardized digital questionnaire was developed and the district attorneys in the catchment area of the affiliated Forensic Institute were requested to evaluate four different types of forensic imaging reports based on four cases examples. Each case was described in four different report types (short written report only, gray-scale CT image with figure caption, color-coded CT image with figure caption, 3D-reconstruction with figure caption). The survey participants were asked to evaluate those types of reports regarding understandability, cost effectiveness and overall appropriateness for the courtroom. 3D reconstructions and color-coded CT images accompanied by written report were preferred regarding understandability and cost/effectiveness. 3D reconstructions of the forensic findings reviewed as most adequate for court. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

An evolution of image source camera attribution approaches.

PubMed

Jahanirad, Mehdi; Wahab, Ainuddin Wahid Abdul; Anuar, Nor Badrul

2016-05-01

Camera attribution plays an important role in digital image forensics by providing the evidence and distinguishing characteristics of the origin of the digital image. It allows the forensic analyser to find the possible source camera which captured the image under investigation. However, in real-world applications, these approaches have faced many challenges due to the large set of multimedia data publicly available through photo sharing and social network sites, captured with uncontrolled conditions and undergone variety of hardware and software post-processing operations. Moreover, the legal system only accepts the forensic analysis of the digital image evidence if the applied camera attribution techniques are unbiased, reliable, nondestructive and widely accepted by the experts in the field. The aim of this paper is to investigate the evolutionary trend of image source camera attribution approaches from fundamental to practice, in particular, with the application of image processing and data mining techniques. Extracting implicit knowledge from images using intrinsic image artifacts for source camera attribution requires a structured image mining process. In this paper, we attempt to provide an introductory tutorial on the image processing pipeline, to determine the general classification of the features corresponding to different components for source camera attribution. The article also reviews techniques of the source camera attribution more comprehensively in the domain of the image forensics in conjunction with the presentation of classifying ongoing developments within the specified area. The classification of the existing source camera attribution approaches is presented based on the specific parameters, such as colour image processing pipeline, hardware- and software-related artifacts and the methods to extract such artifacts. The more recent source camera attribution approaches, which have not yet gained sufficient attention among image forensics researchers, are also critically analysed and further categorised into four different classes, namely, optical aberrations based, sensor camera fingerprints based, processing statistics based and processing regularities based, to present a classification. Furthermore, this paper aims to investigate the challenging problems, and the proposed strategies of such schemes based on the suggested taxonomy to plot an evolution of the source camera attribution approaches with respect to the subjective optimisation criteria over the last decade. The optimisation criteria were determined based on the strategies proposed to increase the detection accuracy, robustness and computational efficiency of source camera brand, model or device attribution. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Validation of high throughput sequencing and microbial forensics applications

PubMed Central

2014-01-01

High throughput sequencing (HTS) generates large amounts of high quality sequence data for microbial genomics. The value of HTS for microbial forensics is the speed at which evidence can be collected and the power to characterize microbial-related evidence to solve biocrimes and bioterrorist events. As HTS technologies continue to improve, they provide increasingly powerful sets of tools to support the entire field of microbial forensics. Accurate, credible results allow analysis and interpretation, significantly influencing the course and/or focus of an investigation, and can impact the response of the government to an attack having individual, political, economic or military consequences. Interpretation of the results of microbial forensic analyses relies on understanding the performance and limitations of HTS methods, including analytical processes, assays and data interpretation. The utility of HTS must be defined carefully within established operating conditions and tolerances. Validation is essential in the development and implementation of microbial forensics methods used for formulating investigative leads attribution. HTS strategies vary, requiring guiding principles for HTS system validation. Three initial aspects of HTS, irrespective of chemistry, instrumentation or software are: 1) sample preparation, 2) sequencing, and 3) data analysis. Criteria that should be considered for HTS validation for microbial forensics are presented here. Validation should be defined in terms of specific application and the criteria described here comprise a foundation for investigators to establish, validate and implement HTS as a tool in microbial forensics, enhancing public safety and national security. PMID:25101166

Validation of high throughput sequencing and microbial forensics applications.

PubMed

Budowle, Bruce; Connell, Nancy D; Bielecka-Oder, Anna; Colwell, Rita R; Corbett, Cindi R; Fletcher, Jacqueline; Forsman, Mats; Kadavy, Dana R; Markotic, Alemka; Morse, Stephen A; Murch, Randall S; Sajantila, Antti; Schmedes, Sarah E; Ternus, Krista L; Turner, Stephen D; Minot, Samuel

2014-01-01

High throughput sequencing (HTS) generates large amounts of high quality sequence data for microbial genomics. The value of HTS for microbial forensics is the speed at which evidence can be collected and the power to characterize microbial-related evidence to solve biocrimes and bioterrorist events. As HTS technologies continue to improve, they provide increasingly powerful sets of tools to support the entire field of microbial forensics. Accurate, credible results allow analysis and interpretation, significantly influencing the course and/or focus of an investigation, and can impact the response of the government to an attack having individual, political, economic or military consequences. Interpretation of the results of microbial forensic analyses relies on understanding the performance and limitations of HTS methods, including analytical processes, assays and data interpretation. The utility of HTS must be defined carefully within established operating conditions and tolerances. Validation is essential in the development and implementation of microbial forensics methods used for formulating investigative leads attribution. HTS strategies vary, requiring guiding principles for HTS system validation. Three initial aspects of HTS, irrespective of chemistry, instrumentation or software are: 1) sample preparation, 2) sequencing, and 3) data analysis. Criteria that should be considered for HTS validation for microbial forensics are presented here. Validation should be defined in terms of specific application and the criteria described here comprise a foundation for investigators to establish, validate and implement HTS as a tool in microbial forensics, enhancing public safety and national security.

Forensic Taxonomy of Android Social Apps.

PubMed

Azfar, Abdullah; Choo, Kim-Kwang Raymond; Liu, Lin

2017-03-01

An Android social app taxonomy incorporating artifacts that are of forensic interest will enable users and forensic investigators to identify the personally identifiable information (PII) stored by the apps. In this study, 30 popular Android social apps were examined. Artifacts of forensic interest (e.g., contacts lists, chronology of messages, and timestamp of an added contact) were recovered. In addition, images were located, and Facebook token strings used to tie account identities and gain access to information entered into Facebook by a user were identified. Based on the findings, a two-dimensional taxonomy of the forensic artifacts of the social apps is proposed. A comparative summary of existing forensic taxonomies of different categories of Android apps, designed to facilitate timely collection and analysis of evidentiary materials from Android devices, is presented. © 2016 American Academy of Forensic Sciences.

Capturing and displaying microscopic images used in medical diagnostics and forensic science using 4K video resolution - an application in higher education.

PubMed

Maier, Hans; de Heer, Gert; Ortac, Ajda; Kuijten, Jan

2015-11-01

To analyze, interpret and evaluate microscopic images, used in medical diagnostics and forensic science, video images for educational purposes were made with a very high resolution of 4096 × 2160 pixels (4K), which is four times as many pixels as High-Definition Video (1920 × 1080 pixels). The unprecedented high resolution makes it possible to see details that remain invisible to any other video format. The images of the specimens (blood cells, tissue sections, hair, fibre, etc.) are recorded using a 4K video camera which is attached to a light microscope. After processing, this resulted in very sharp and highly detailed images. This material was then used in education for classroom discussion. Spoken explanation by experts in the field of medical diagnostics and forensic science was also added to the high-resolution video images to make it suitable for self-study. © 2015 The Authors. Journal of Microscopy published by John Wiley & Sons Ltd on behalf of Royal Microscopical Society.

Application of Next-generation Sequencing Technology in Forensic Science

PubMed Central

Yang, Yaran; Xie, Bingbing; Yan, Jiangwei

2014-01-01

Next-generation sequencing (NGS) technology, with its high-throughput capacity and low cost, has developed rapidly in recent years and become an important analytical tool for many genomics researchers. New opportunities in the research domain of the forensic studies emerge by harnessing the power of NGS technology, which can be applied to simultaneously analyzing multiple loci of forensic interest in different genetic contexts, such as autosomes, mitochondrial and sex chromosomes. Furthermore, NGS technology can also have potential applications in many other aspects of research. These include DNA database construction, ancestry and phenotypic inference, monozygotic twin studies, body fluid and species identification, and forensic animal, plant and microbiological analyses. Here we review the application of NGS technology in the field of forensic science with the aim of providing a reference for future forensics studies and practice. PMID:25462152

Development of a computer-assisted forensic radiographic identification method using the lateral cervical and lumbar spine.

PubMed

Derrick, Sharon M; Raxter, Michelle H; Hipp, John A; Goel, Priya; Chan, Elaine F; Love, Jennifer C; Wiersema, Jason M; Akella, N Shastry

2015-01-01

Medical examiners and coroners (ME/C) in the United States hold statutory responsibility to identify deceased individuals who fall under their jurisdiction. The computer-assisted decedent identification (CADI) project was designed to modify software used in diagnosis and treatment of spinal injuries into a mathematically validated tool for ME/C identification of fleshed decedents. CADI software analyzes the shapes of targeted vertebral bodies imaged in an array of standard radiographs and quantifies the likelihood that any two of the radiographs contain matching vertebral bodies. Six validation tests measured the repeatability, reliability, and sensitivity of the method, and the effects of age, sex, and number of radiographs in array composition. CADI returned a 92-100% success rate in identifying the true matching pair of vertebrae within arrays of five to 30 radiographs. Further development of CADI is expected to produce a novel identification method for use in ME/C offices that is reliable, timely, and cost-effective. © 2014 American Academy of Forensic Sciences.

Digital imaging and image analysis applied to numerical applications in forensic hair examination.

PubMed

Brooks, Elizabeth; Comber, Bruce; McNaught, Ian; Robertson, James

2011-03-01

A method that provides objective data to complement the hair analysts' microscopic observations, which is non-destructive, would be of obvious benefit in the forensic examination of hairs. This paper reports on the use of objective colour measurement and image analysis techniques of auto-montaged images. Brown Caucasian telogen scalp hairs were chosen as a stern test of the utility of these approaches. The results show the value of using auto-montaged images and the potential for the use of objective numerical measures of colour and pigmentation to complement microscopic observations. 2010. Published by Elsevier Ireland Ltd. All rights reserved.

A generalized Benford's law for JPEG coefficients and its applications in image forensics

NASA Astrophysics Data System (ADS)

Fu, Dongdong; Shi, Yun Q.; Su, Wei

2007-02-01

In this paper, a novel statistical model based on Benford's law for the probability distributions of the first digits of the block-DCT and quantized JPEG coefficients is presented. A parametric logarithmic law, i.e., the generalized Benford's law, is formulated. Furthermore, some potential applications of this model in image forensics are discussed in this paper, which include the detection of JPEG compression for images in bitmap format, the estimation of JPEG compression Qfactor for JPEG compressed bitmap image, and the detection of double compressed JPEG image. The results of our extensive experiments demonstrate the effectiveness of the proposed statistical model.

Value of monoenergetic dual-energy CT (DECT) for artefact reduction from metallic orthopedic implants in post-mortem studies.

PubMed

Filograna, Laura; Magarelli, Nicola; Leone, Antonio; Guggenberger, Roman; Winklhofer, Sebastian; Thali, Michael John; Bonomo, Lorenzo

2015-09-01

The aim of this ex vivo study was to assess the performance of monoenergetic dual-energy CT (DECT) reconstructions to reduce metal artefacts in bodies with orthopedic devices in comparison with standard single-energy CT (SECT) examinations in forensic imaging. Forensic and clinical impacts of this study are also discussed. Thirty metallic implants in 20 consecutive cadavers with metallic implants underwent both SECT and DECT with a clinically suitable scanning protocol. Extrapolated monoenergetic DECT images at 64, 69, 88, 105, 120, and 130 keV and individually adjusted monoenergy for optimized image quality (OPTkeV) were generated. Image quality of the seven monoenergetic images and of the corresponding SECT image was assessed qualitatively and quantitatively by visual rating and measurements of attenuation changes induced by streak artefact. Qualitative and quantitative analyses showed statistically significant differences between monoenergetic DECT extrapolated images and SECT, with improvements in diagnostic assessment in monoenergetic DECT at higher monoenergies. The mean value of OPTkeV was 137.6 ± 4.9 with a range of 130 to 148 keV. This study demonstrates that monoenergetic DECT images extrapolated at high energy levels significantly reduce metallic artefacts from orthopedic implants and improve image quality compared to SECT examination in forensic imaging.

An Evidence-based Forensic Taxonomy of Windows Phone Dating Apps.

PubMed

Cahyani, Niken Dwi Wahyu; Choo, Kim-Kwang Raymond; Ab Rahman, Nurul Hidayah; Ashman, Helen

2018-05-21

Advances in technologies including development of smartphone features have contributed to the growth of mobile applications, including dating apps. However, online dating services can be misused. To support law enforcement investigations, a forensic taxonomy that provides a systematic classification of forensic artifacts from Windows Phone 8 (WP8) dating apps is presented in this study. The taxonomy has three categories, namely: Apps Categories, Artifacts Categories, and Data Partition Categories. This taxonomy is built based on the findings from a case study of 28 mobile dating apps, using mobile forensic tools. The dating app taxonomy can be used to inform future studies of dating and related apps, such as those from Android and iOS platforms. © 2018 American Academy of Forensic Sciences.

Personal identification based on prescription eyewear.

PubMed

Berg, Gregory E; Collins, Randall S

2007-03-01

This study presents a web-based tool that can be used to assist in identification of unknown individuals using spectacle prescriptions. Currently, when lens prescriptions are used in forensic identifications, investigators are constrained to a simple "match" or "no-match" judgment with an antemortem prescription. It is not possible to evaluate the strength of the conclusion, or rather, the potential or real error rates associated with the conclusion. Three databases totaling over 385,000 individual prescriptions are utilized in this study to allow forensic analysts to easily determine the strength of individuation of a spectacle match to antemortem records by calculating the frequency at which the observed prescription occurs in various U.S. populations. Optical refractive errors are explained, potential states and combinations of refractive errors are described, measuring lens corrections is discussed, and a detailed description of the databases is presented. The practical application of this system is demonstrated using two recent forensic identifications. This research provides a valuable personal identification tool that can be used in cases where eyeglass portions are recovered in forensic contexts.

Soil fungi: their potential use as a forensic tool.

PubMed

Tranchida, María C; Centeno, Néstor D; Cabello, Marta N

2014-05-01

As a grave is an anomalous environment and differs from its surroundings, criminal investigators employ different techniques for locating, recovering, and analyzing clandestine graves. In this study were identified the fungi found in the soil under corpses in decomposition with an aim at relating the copresence of human remains and different fungal species. Were isolated the fungi in three ways: soil washing, serial dilutions, and moist chamber growth. Dichotomomyces cejpii, Talaromyces trachyspermus, Talaromyces flavus, and Talaromyces sp. were the representative species found--with those belonging to the ammonia group, whose fungi are the first in the succession of cadaver decomposition directly in the ground. The mycobiota found at the present study area clearly differs to mycobiota identified in control sample and from previously described species for other areas of Buenos Aires Province, Argentina. Further forensic examples of this type are needed to develop fully the detailed use of mycology as a forensic tool. © 2014 American Academy of Forensic Sciences.

Intuitive presentation of clinical forensic data using anonymous and person-specific 3D reference manikins.

PubMed

Urschler, Martin; Höller, Johannes; Bornik, Alexander; Paul, Tobias; Giretzlehner, Michael; Bischof, Horst; Yen, Kathrin; Scheurer, Eva

2014-08-01

The increasing use of CT/MR devices in forensic analysis motivates the need to present forensic findings from different sources in an intuitive reference visualization, with the aim of combining 3D volumetric images along with digital photographs of external findings into a 3D computer graphics model. This model allows a comprehensive presentation of forensic findings in court and enables comparative evaluation studies correlating data sources. The goal of this work was to investigate different methods to generate anonymous and patient-specific 3D models which may be used as reference visualizations. The issue of registering 3D volumetric as well as 2D photographic data to such 3D models is addressed to provide an intuitive context for injury documentation from arbitrary modalities. We present an image processing and visualization work-flow, discuss the major parts of this work-flow, compare the different investigated reference models, and show a number of cases studies that underline the suitability of the proposed work-flow for presenting forensically relevant information in 3D visualizations. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Facing victims: forensics, visual technologies, and sexual assault examination.

PubMed

Mulla, Sameena

2011-05-01

This article analyzes a particular legal-medical artifact: the photos of wounds and injuries collected by forensic nurses who work with sexual assault victim-patients. I show how forensic expertise draws on multiple medical practices and adapts these practices with the goal of preserving the integrity of the evidence collection processes. In particular, forensic nurse examiners practice a rigid regime of draping and avoiding the victim-patient's gaze at some points in the forensic routine while engaging the victim's gaze at other points in the examination. Unlike the examination, the photograph itself deliberately pictures the patient's gaze to break the plane of the image, giving the photographic artifact an affective charge as a truth-preserving object within a juridical process. Focusing on forensic photography sheds light on the techno-scientific possibilities that enable forensic encounters as they align therapeutic techniques with legal directives in new and problematic ways.

Assessment of accuracy and recognition of three-dimensional computerized forensic craniofacial reconstruction.

PubMed

Miranda, Geraldo Elias; Wilkinson, Caroline; Roughley, Mark; Beaini, Thiago Leite; Melani, Rodolfo Francisco Haltenhoff

2018-01-01

Facial reconstruction is a technique that aims to reproduce the individual facial characteristics based on interpretation of the skull, with the objective of recognition leading to identification. The aim of this paper was to evaluate the accuracy and recognition level of three-dimensional (3D) computerized forensic craniofacial reconstruction (CCFR) performed in a blind test on open-source software using computed tomography (CT) data from live subjects. Four CCFRs were produced by one of the researchers, who was provided with information concerning the age, sex, and ethnic group of each subject. The CCFRs were produced using Blender® with 3D models obtained from the CT data and templates from the MakeHuman® program. The evaluation of accuracy was carried out in CloudCompare, by geometric comparison of the CCFR to the subject 3D face model (obtained from the CT data). A recognition level was performed using the Picasa® recognition tool with a frontal standardized photography, images of the subject CT face model and the CCFR. Soft-tissue depth and nose, ears and mouth were based on published data, observing Brazilian facial parameters. The results were presented from all the points that form the CCFR model, with an average for each comparison between 63% and 74% with a distance -2.5 ≤ x ≤ 2.5 mm from the skin surface. The average distances were 1.66 to 0.33 mm and greater distances were observed around the eyes, cheeks, mental and zygomatic regions. Two of the four CCFRs were correctly matched by the Picasa® tool. Free software programs are capable of producing 3D CCFRs with plausible levels of accuracy and recognition and therefore indicate their value for use in forensic applications.

Assessment of accuracy and recognition of three-dimensional computerized forensic craniofacial reconstruction

PubMed Central

Wilkinson, Caroline; Roughley, Mark; Beaini, Thiago Leite; Melani, Rodolfo Francisco Haltenhoff

2018-01-01

Facial reconstruction is a technique that aims to reproduce the individual facial characteristics based on interpretation of the skull, with the objective of recognition leading to identification. The aim of this paper was to evaluate the accuracy and recognition level of three-dimensional (3D) computerized forensic craniofacial reconstruction (CCFR) performed in a blind test on open-source software using computed tomography (CT) data from live subjects. Four CCFRs were produced by one of the researchers, who was provided with information concerning the age, sex, and ethnic group of each subject. The CCFRs were produced using Blender® with 3D models obtained from the CT data and templates from the MakeHuman® program. The evaluation of accuracy was carried out in CloudCompare, by geometric comparison of the CCFR to the subject 3D face model (obtained from the CT data). A recognition level was performed using the Picasa® recognition tool with a frontal standardized photography, images of the subject CT face model and the CCFR. Soft-tissue depth and nose, ears and mouth were based on published data, observing Brazilian facial parameters. The results were presented from all the points that form the CCFR model, with an average for each comparison between 63% and 74% with a distance -2.5 ≤ x ≤ 2.5 mm from the skin surface. The average distances were 1.66 to 0.33 mm and greater distances were observed around the eyes, cheeks, mental and zygomatic regions. Two of the four CCFRs were correctly matched by the Picasa® tool. Free software programs are capable of producing 3D CCFRs with plausible levels of accuracy and recognition and therefore indicate their value for use in forensic applications. PMID:29718983

Sherlock Holmes counts the atoms

NASA Astrophysics Data System (ADS)

Tuniz, C.; Zoppi, U.; Hotchkis, M. A. C.

2004-01-01

Modern forensic science has to deal not only with homicides and other traditional crimes but also with more global threats such as smuggling of nuclear materials, clandestine production of weapons of mass destruction, stockpiling of illicit drugs by state-controlled groups and war crimes. Forensic applications have always benefited from the use of advanced analytical tools that can characterise materials found at crime scenes. In this paper we will discuss the use of accelerator mass spectrometry as an ultra sensitive tool for the crime labs of the third millennium.

Forensic geoscience: applications of geology, geomorphology and geophysics to criminal investigations

NASA Astrophysics Data System (ADS)

Ruffell, Alastair; McKinley, Jennifer

2005-03-01

One hundred years ago Georg Popp became the first scientist to present in court a case where the geological makeup of soils was used to secure a criminal conviction. Subsequently there have been significant advances in the theory and practice of forensic geoscience: many of them subsequent to the seminal publication of "Forensic Geology" by Murray and Tedrow [Murray, R., Tedrow, J.C.F. 1975 (republished 1986). Forensic Geology: Earth Sciences and Criminal Investigation. Rutgers University Press, New York, 240 pp.]. Our review places historical development in the modern context of how the allied disciplines of geology (mineralogy, sedimentology, microscopy), geophysics, soil science, microbiology, anthropology and geomorphology have been used as tool to aid forensic (domestic, serious, terrorist and international) crime investigations. The latter half of this paper uses the concept of scales of investigation, from large-scale landforms through to microscopic particles as a method of categorising the large number of geoscience applications to criminal investigation. Forensic geoscience has traditionally used established non-forensic techniques: 100 years after Popp's seminal work, research into forensic geoscience is beginning to lead, as opposed to follow other scientific disciplines.

Police witness identification images: a geometric morphometric analysis.

PubMed

Hayes, Susan; Tullberg, Cameron

2012-11-01

Research into witness identification images typically occurs within the laboratory and involves subjective likeness and recognizability judgments. This study analyzed whether actual witness identification images systematically alter the facial shapes of the suspects described. The shape analysis tool, geometric morphometrics, was applied to 46 homologous facial landmarks displayed on 50 witness identification images and their corresponding arrest photographs, using principal component analysis and multivariate regressions. The results indicate that compared with arrest photographs, witness identification images systematically depict suspects with lowered and medially located eyebrows (p = <0.000001). This was found to occur independently of the Police Artist, and did not occur with composites produced under laboratory conditions. There are several possible explanations for this finding, including any, or all, of the following: The suspect was frowning at the time of the incident, the witness had negative feelings toward the suspect, this is an effect of unfamiliar face processing, the suspect displayed fear at the time of their arrest photograph. © 2012 American Academy of Forensic Sciences.

Forensic culture as epistemic culture: the sociology of forensic science.

PubMed

Cole, Simon A

2013-03-01

This paper explores whether we can interpret the notion of 'forensic culture' as something akin to what Knorr-Cetina called an 'epistemic culture'. Can we speak of a 'forensic culture', and, if so, how is it similar to, or different from, other epistemic cultures that exist in what is conventionally called 'science'? This question has important policy implications given the National Academy Science's (NAS) recent identification of 'culture' as one of the problems at the root of what it identified as 'serious deficiencies' in U.S. forensic science and 'scientific culture' as an antidote to those problems. Finding the NAS's characterisation of 'scientific culture' overly general and naïve, this paper offers a preliminary exploration of what might be called a 'forensic culture'. Specifically, the paper explores the way in which few of the empirical findings accumulated by sociologists of science about research science seem to apply to forensic science. Instead, forensic science seems to have developed a distinct culture for which a sociological analysis will require new explanatory tools. Faithful sociological analysis of 'forensic culture' will be a necessary prerequisite for the kind of culture change prescribed by external reformist bodies like the NAS. Copyright © 2012. Published by Elsevier Ltd.

High Performance Proactive Digital Forensics

NASA Astrophysics Data System (ADS)

Alharbi, Soltan; Moa, Belaid; Weber-Jahnke, Jens; Traore, Issa

2012-10-01

With the increase in the number of digital crimes and in their sophistication, High Performance Computing (HPC) is becoming a must in Digital Forensics (DF). According to the FBI annual report, the size of data processed during the 2010 fiscal year reached 3,086 TB (compared to 2,334 TB in 2009) and the number of agencies that requested Regional Computer Forensics Laboratory assistance increasing from 689 in 2009 to 722 in 2010. Since most investigation tools are both I/O and CPU bound, the next-generation DF tools are required to be distributed and offer HPC capabilities. The need for HPC is even more evident in investigating crimes on clouds or when proactive DF analysis and on-site investigation, requiring semi-real time processing, are performed. Although overcoming the performance challenge is a major goal in DF, as far as we know, there is almost no research on HPC-DF except for few papers. As such, in this work, we extend our work on the need of a proactive system and present a high performance automated proactive digital forensic system. The most expensive phase of the system, namely proactive analysis and detection, uses a parallel extension of the iterative z algorithm. It also implements new parallel information-based outlier detection algorithms to proactively and forensically handle suspicious activities. To analyse a large number of targets and events and continuously do so (to capture the dynamics of the system), we rely on a multi-resolution approach to explore the digital forensic space. Data set from the Honeynet Forensic Challenge in 2001 is used to evaluate the system from DF and HPC perspectives.

The cutting edge - Micro-CT for quantitative toolmark analysis of sharp force trauma to bone.

PubMed

Norman, D G; Watson, D G; Burnett, B; Fenne, P M; Williams, M A

2018-02-01

Toolmark analysis involves examining marks created on an object to identify the likely tool responsible for creating those marks (e.g., a knife). Although a potentially powerful forensic tool, knife mark analysis is still in its infancy and the validation of imaging techniques as well as quantitative approaches is ongoing. This study builds on previous work by simulating real-world stabbings experimentally and statistically exploring quantitative toolmark properties, such as cut mark angle captured by micro-CT imaging, to predict the knife responsible. In Experiment 1 a mechanical stab rig and two knives were used to create 14 knife cut marks on dry pig ribs. The toolmarks were laser and micro-CT scanned to allow for quantitative measurements of numerous toolmark properties. The findings from Experiment 1 demonstrated that both knives produced statistically different cut mark widths, wall angle and shapes. Experiment 2 examined knife marks created on fleshed pig torsos with conditions designed to better simulate real-world stabbings. Eight knives were used to generate 64 incision cut marks that were also micro-CT scanned. Statistical exploration of these cut marks suggested that knife type, serrated or plain, can be predicted from cut mark width and wall angle. Preliminary results suggest that knives type can be predicted from cut mark width, and that knife edge thickness correlates with cut mark width. An additional 16 cut marks walls were imaged for striation marks using scanning electron microscopy with results suggesting that this approach might not be useful for knife mark analysis. Results also indicated that observer judgements of cut mark shape were more consistent when rated from micro-CT images than light microscopy images. The potential to combine micro-CT data, medical grade CT data and photographs to develop highly realistic virtual models for visualisation and 3D printing is also demonstrated. This is the first study to statistically explore simulated real-world knife marks imaged by micro-CT to demonstrate the potential of quantitative approaches in knife mark analysis. Findings and methods presented in this study are relevant to both forensic toolmark researchers as well as practitioners. Limitations of the experimental methodologies and imaging techniques are discussed, and further work is recommended. Copyright © 2017 Elsevier B.V. All rights reserved.

A forensic identification case and DPid - can it be a useful tool?

PubMed

Queiroz, Cristhiane Leão de; Bostock, Ellen Marie; Santos, Carlos Ferreira; Guimarães, Marco Aurélio; Silva, Ricardo Henrique Alves da

2017-01-01

The aim of this study was to show DPid as an important tool of potential application to solve cases with dental prosthesis, such as the forensic case reported, in which a skull, denture and dental records were received for analysis. Human identification is still challenging in various circumstances and Dental Prosthetics Identification (DPid) stores the patient's name and prosthesis information and provides access through an embedded code in dental prosthesis or an identification card. All of this information is digitally stored on servers accessible only by dentists, laboratory technicians and patients with their own level of secure access. DPid provides a complete single-source list of all dental prosthesis features (materials and components) under complete and secure documentation used for clinical follow-up and for human identification. If DPid tool was present in this forensic case, it could have been solved without requirement of DNA exam, which confirmed the dental comparison of antemortem and postmortem records, and concluded the case as a positive identification.

Dismemberment and disarticulation: A forensic anthropological approach.

PubMed

Porta, Davide; Amadasi, Alberto; Cappella, Annalisa; Mazzarelli, Debora; Magli, Francesca; Gibelli, Daniele; Rizzi, Agostino; Picozzi, Massimo; Gentilomo, Andrea; Cattaneo, Cristina

2016-02-01

The dismemberment of a corpse is fairly rare in forensic medicine. It is usually performed with different types of sharp tools and used as a method of concealing the body and thus erasing proof of murder. In this context, the disarticulation of body parts is an even rarer event. The authors present the analysis of six dismemberment cases (well-preserved corpses or skeletonized remains with clear signs of dismemberment), arising from different contexts and in which different types of sharp tools were used. Two cases in particular showed peculiar features where separation of the forearms and limbs from the rest of the body was performed not by cutting through bones but through a meticulous disarticulation. The importance of a thorough anthropological investigation is thus highlighted, since it provides crucial information on the manner of dismemberment/disarticulation, the types of tools used and the general context in which the crime was perpetrated. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Introduction to Forensics and the Use of the Helix Free Forensic Tool

DTIC Science & Technology

2012-01-01

computer system belongs to and his personal activities, interests, and hobbies. An example presented in the paper was that pedophiles might keep...digital records like pictures or video of their delinquent activities. As we mentioned before, we must keep an accurate record of our investigation

A metamodel for mobile forensics investigation domain

PubMed Central

Abd Razak, Shukor; Othman, Siti Hajar; Mohammed, Arafat; Saeed, Faisal

2017-01-01

With the rapid development of technology, mobile phones have become an essential tool in terms of crime fighting and criminal investigation. However, many mobile forensics investigators face difficulties with the investigation process in their domain. These difficulties are due to the heavy reliance of the forensics field on knowledge which, although a valuable resource, is scattered and widely dispersed. The wide dispersion of mobile forensics knowledge not only makes investigation difficult for new investigators, resulting in substantial waste of time, but also leads to ambiguity in the concepts and terminologies of the mobile forensics domain. This paper developed an approach for mobile forensics domain based on metamodeling. The developed approach contributes to identify common concepts of mobile forensics through a development of the Mobile Forensics Metamodel (MFM). In addion, it contributes to simplifying the investigation process and enables investigation teams to capture and reuse specialized forensic knowledge, thereby supporting the training and knowledge management activities. Furthermore, it reduces the difficulty and ambiguity in the mobile forensics domain. A validation process was performed to ensure the completeness and correctness of the MFM. The validation was conducted using two techniques for improvements and adjustments to the metamodel. The last version of the adjusted metamodel was named MFM 1.2. PMID:28445486

Getting in touch--3D printing in forensic imaging.

PubMed

Ebert, Lars Chr; Thali, Michael J; Ross, Steffen

2011-09-10

With the increasing use of medical imaging in forensics, as well as the technological advances in rapid prototyping, we suggest combining these techniques to generate displays of forensic findings. We used computed tomography (CT), CT angiography, magnetic resonance imaging (MRI) and surface scanning with photogrammetry in conjunction with segmentation techniques to generate 3D polygon meshes. Based on these data sets, a 3D printer created colored models of the anatomical structures. Using this technique, we could create models of bone fractures, vessels, cardiac infarctions, ruptured organs as well as bitemark wounds. The final models are anatomically accurate, fully colored representations of bones, vessels and soft tissue, and they demonstrate radiologically visible pathologies. The models are more easily understood by laypersons than volume rendering or 2D reconstructions. Therefore, they are suitable for presentations in courtrooms and for educational purposes. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

[The procedure for documentation of digital images in forensic medical histology].

PubMed

Putintsev, V A; Bogomolov, D V; Fedulova, M V; Gribunov, Iu P; Kul'bitskiĭ, B N

2012-01-01

This paper is devoted to the novel computer technologies employed in the studies of histological preparations. These technologies allow to visualize digital images, structurize the data obtained and store the results in computer memory. The authors emphasize the necessity to properly document digital images obtained during forensic-histological studies and propose the procedure for the formulation of electronic documents in conformity with the relevant technical and legal requirements. It is concluded that the use of digital images as a new study object permits to obviate the drawbacks inherent in the work with the traditional preparations and pass from descriptive microscopy to their quantitative analysis.

AQME: A forensic mitochondrial DNA analysis tool for next-generation sequencing data.

PubMed

Sturk-Andreaggi, Kimberly; Peck, Michelle A; Boysen, Cecilie; Dekker, Patrick; McMahon, Timothy P; Marshall, Charla K

2017-11-01

The feasibility of generating mitochondrial DNA (mtDNA) data has expanded considerably with the advent of next-generation sequencing (NGS), specifically in the generation of entire mtDNA genome (mitogenome) sequences. However, the analysis of these data has emerged as the greatest challenge to implementation in forensics. To address this need, a custom toolkit for use in the CLC Genomics Workbench (QIAGEN, Hilden, Germany) was developed through a collaborative effort between the Armed Forces Medical Examiner System - Armed Forces DNA Identification Laboratory (AFMES-AFDIL) and QIAGEN Bioinformatics. The AFDIL-QIAGEN mtDNA Expert, or AQME, generates an editable mtDNA profile that employs forensic conventions and includes the interpretation range required for mtDNA data reporting. AQME also integrates an mtDNA haplogroup estimate into the analysis workflow, which provides the analyst with phylogenetic nomenclature guidance and a profile quality check without the use of an external tool. Supplemental AQME outputs such as nucleotide-per-position metrics, configurable export files, and an audit trail are produced to assist the analyst during review. AQME is applied to standard CLC outputs and thus can be incorporated into any mtDNA bioinformatics pipeline within CLC regardless of sample type, library preparation or NGS platform. An evaluation of AQME was performed to demonstrate its functionality and reliability for the analysis of mitogenome NGS data. The study analyzed Illumina mitogenome data from 21 samples (including associated controls) of varying quality and sample preparations with the AQME toolkit. A total of 211 tool edits were automatically applied to 130 of the 698 total variants reported in an effort to adhere to forensic nomenclature. Although additional manual edits were required for three samples, supplemental tools such as mtDNA haplogroup estimation assisted in identifying and guiding these necessary modifications to the AQME-generated profile. Along with profile generation, AQME reported accurate haplogroups for 18 of the 19 samples analyzed. The single errant haplogroup assignment, although phylogenetically close, identified a bug that only affects partial mitogenome data. Future adjustments to AQME's haplogrouping tool will address this bug as well as enhance the overall scoring strategy to better refine and automate haplogroup assignments. As NGS enables broader use of the mtDNA locus in forensics, the availability of AQME and other forensic-focused mtDNA analysis tools will ease the transition and further support mitogenome analysis within routine casework. Toward this end, the AFMES-AFDIL has utilized the AQME toolbox in conjunction with the CLC Genomics Workbench to successfully validate and implement two NGS mitogenome methods. Copyright © 2017 Elsevier B.V. All rights reserved.

Clinical and forensic signs related to opioids abuse.

PubMed

Dinis-Oliveira, Ricardo Jorge; Carvalho, Felix; Moreira, Roxana; Duarte, Jose Alberto; Proenca, Jorge Brandao; Santos, Agostinho; Magalhaes, Teresa

2012-12-01

For a good performance in Clinical and Forensic Toxicology it is important to be aware of the biological and non-biological signs and symptoms related to xenobiotic exposure. This manuscript highlights and analyzes clinical and forensic imaging related to opioids abuse critically. Particularly, respiratory depression, track marks and hemorrhages, skin "popping", practices of phlebotomy, tissue necrosis and ulceration, dermatitis, tongue hyperpigmentation, "coma blisters", intra-arterial administration, candidiasis, wounds associated with anthrax or clostridium contaminated heroin, desomorphine related lesions and characteristic non-biological evidences are some commonly reported findings in opioids abuse, which will be discussed. For this purpose, clinical and forensic cases from our database (National Institute of Legal Medicine and Forensic Sciences, North Branch, Portugal), in addition to literature data, are reviewed.

DNA in the Criminal Justice System: The DNA Success Story in Perspective.

PubMed

Mapes, Anna A; Kloosterman, Ate D; de Poot, Christianne J

2015-07-01

Current figures on the efficiency of DNA as an investigative tool in criminal investigations only tell part of the story. To get the DNA success story in the right perspective, we examined all forensic reports from serious (N = 116) and high-volume crime cases (N = 2791) over the year 2011 from one police region in the Netherlands. These data show that 38% of analyzed serious crime traces (N = 384) and 17% of analyzed high-volume crime traces (N = 386) did not result in a DNA profile. Turnaround times (from crime scene to DNA report) were 66 days for traces from serious crimes and 44 days for traces from high-volume crimes. Suspects were truly identified through a match with the Offender DNA database of the Netherlands in 3% of the serious crime cases and in 1% of the high-volume crime cases. These data are important for both the forensic laboratory and the professionals in the criminal justice system to further optimize forensic DNA testing as an investigative tool. © 2015 American Academy of Forensic Sciences.

Validating the Hamilton Anatomy of Risk Management-Forensic Version and the Aggressive Incidents Scale.

PubMed

Cook, Alana N; Moulden, Heather M; Mamak, Mini; Lalani, Shams; Messina, Katrina; Chaimowitz, Gary

2018-06-01

The Hamilton Anatomy of Risk Management-Forensic Version (HARM-FV) is a structured professional judgement tool of violence risk developed for use in forensic inpatient psychiatric settings. The HARM-FV is used with the Aggressive Incidents Scale (AIS), which provides a standardized method of recording aggressive incidents. We report the findings of the concurrent validity of the HARM-FV and the AIS with widely used measures of violence risk and aggressive acts, the Historical, Clinical, Risk Management-20, Version 3 (HCR-20 V3 ) and a modified version of the Overt Aggression Scale. We also present findings on the predictive validity of the HARM-FV in the short term (1-month follow-up periods) for varying severities of aggressive acts. The results indicated strong support for the concurrent validity of the HARM-FV and AIS and promising support for the predictive accuracy of the tool for inpatient aggression. This article provides support for the continued clinical use of the HARM-FV within an inpatient forensic setting and highlights areas for further research.

Isotope ratio mass spectrometry as a tool for source inference in forensic science: A critical review.

PubMed

Gentile, Natacha; Siegwolf, Rolf T W; Esseiva, Pierre; Doyle, Sean; Zollinger, Kurt; Delémont, Olivier

2015-06-01

Isotope ratio mass spectrometry (IRMS) has been used in numerous fields of forensic science in a source inference perspective. This review compiles the studies published on the application of isotope ratio mass spectrometry (IRMS) to the traditional fields of forensic science so far. It completes the review of Benson et al. [1] and synthesises the extent of knowledge already gathered in the following fields: illicit drugs, flammable liquids, human provenancing, microtraces, explosives and other specific materials (packaging tapes, safety matches, plastics, etc.). For each field, a discussion assesses the state of science and highlights the relevance of the information in a forensic context. Through the different discussions which mark out the review, the potential and limitations of IRMS, as well as the needs and challenges of future studies are emphasized. The paper elicits the various dimensions of the source which can be obtained from the isotope information and demonstrates the transversal nature of IRMS as a tool for source inference. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Forensic aspects of DNA-based human identity testing.

PubMed

Roper, Stephen M; Tatum, Owatha L

2008-01-01

The forensic applications of DNA-based human identity laboratory testing are often underappreciated. Molecular biology has seen an exponential improvement in the accuracy and statistical power provided by identity testing in the past decade. This technology, dependent upon an individual's unique DNA sequence, has cemented the use of DNA technology in the forensic laboratory. This paper will discuss the state of modern DNA-based identity testing, describe the technology used to perform this testing, and describe its use as it relates to forensic applications. We will also compare individual technologies, including polymerase chain reaction (PCR) and Southern Blotting, that are used to detect the molecular differences that make all individuals unique. An increasing reliance on DNA-based identity testing dictates that healthcare providers develop an understanding of the background, techniques, and guiding principles of this important forensic tool.

Supplementary value of functional imaging in forensic medicine.

PubMed

Mirzaei, Siroos; Sonneck-Koenne, Charlotte; Bruecke, Thomas; Aryana, Kamran; Knoll, Peter; Zakavi, Rasoul

2012-01-01

The aim of this study is to evaluate the role of functional imaging for forensic purposes. We reviewed a few outpatient cases that were sent to our department for examination after traumatic events and one case with neuropsychic disturbances. Functional imaging showed signs of traumatic lesions in the skeletal system, of brain metabolism and of renal failure. Functional disturbances following traumatic events are in some cases more important than morphological abnormalities. Targeted scintigraphic examinations could be applied for visualisation of traumatic lesions or evaluation of functional disturbances caused by traumatic events. These examinations can be used as evidence in the courtroom.

[Application of computed tomography (CT) examination for forensic medicine].

PubMed

Urbanik, Andrzej; Chrzan, Robert

2013-01-01

The aim of the study is to present a own experiences in usage of post mortem CT examination for forensic medicine. With the help of 16-slice CT scanner 181 corpses were examined. Obtained during acquisition imaging data are later developed with dedicated programmes. Analyzed images were extracted from axial sections, multiplanar reconstructions as well as 3D reconstructions. Gained information helped greatly when classical autopsy was performed by making it more accurate. A CT scan images recorded digitally enable to evaluate corpses at any time, despite processes of putrefaction or cremation. If possible CT examination should precede classical autopsy.

The mental status examination in the age of the internet.

PubMed

Recupero, Patricia R

2010-01-01

The Internet has grown increasingly relevant in the practice of forensic psychiatry. To a psychiatrist conducting a forensic evaluation, the evaluee's Internet use can be relevant in nearly all aspects of the analysis. An evaluee's Internet presence may help to confirm, corroborate, refute, or elaborate on the psychiatrist's general impression of the person. Questions about the individual's choice of screen names, activities, images, and phrases can be valuable conversational tools to increase candor and self-disclosure, even among less cooperative evaluees. Difficulties in mood or affect regulation, problems with thought process or content, and impaired impulse control may be apparent in the evaluee's behavior in various Internet forums-for example, hostile or provocative behavior in social forums or excessive use of gaming or shopping websites. Discussions about the evaluee's behavior on the Internet can help the psychiatrist to assess for impaired insight and judgment. Perceptual disturbances, such as derealization and depersonalization, may be related to an evaluee's overidentification with the virtual world to the neglect of real-life needs and responsibilities. Furthermore, digital evidence can be especially useful in assessments of impairment, credibility, and dangerousness or risk, particularly when the evaluee is uncooperative or unreliable in the face-to-face psychiatric examination. This discussion will provide illustrative examples and suggestions for questions and topics the forensic psychiatrist may find helpful in conducting a thorough evaluation in this new age of the Internet.

[Records of the invisible: Visa reperta in 18th- and 19th-century forensic medicine and their role as promoters of pathological-anatomical knowledge].

PubMed

Müller, Irmgard; Fangerau, Heiner

2010-01-01

Case reports in medicine serve as a tool to collect and to transfer knowledge. A special kind of case report in forensic medicine during the 18th and 19th centuries was the so-called Visum repertum. This format of note-taking and of rendering an expert opinion without presuppositions has rarely investigated in the history of medicine. Analyzing Visa reperta the authors argue that due to their special structure and mode of representation Visa reperta not only shaped the practice of forensic medicine but also the standardized examination and documentation in pathological anatomy. Based on previous studies on medical case reports, medical expert witnesses in court and traditions in pathological anatomy the authors examine two examples from the 18th and 19th centuries in order to show how semiological, classifying methods of presenting forensic examinations were replaced by the material aspect of the observation of examination results itself. The examples are a forensic case report by Michael Alberti (1682-1757) from 1728 and a Visum repertum by Joseph Bernt (1770-1842) from 1827. The authors argue that Visa reperta transcended their original forensic purpose and served as a guideline for pathology leading to an understanding of the origin of diseases in organs. They served as a promoter of scientific medicine, and their persuasiveness was backed by factors such as (a) the extreme conditions of forensic practice, (b) the claim to act as a tool for the sound and precise recording of facts and c) the awareness that they documented objects that were destroyed during the process of documentation.

Pediatric medicolegal autopsy in France: A forensic histopathological approach.

PubMed

Delteil, Clémence; Tuchtan, Lucile; Torrents, Julia; Capuani, Caroline; Piercecchi-Marti, Marie-Dominique

2018-01-01

The aim of postmortem medicolegal examination in pediatric death is primarily to establish the circumstances and causes of death and to exclude child abuse. In France, pediatric death is systematically documented by medicolegal or medical autopsy. In case of medicolegal autopsy, the complementary examinations, requested and financed by justice, are rarely limited to a histopathological examination. However in medical autopsies other tools are available to the pathologist as toxicology, biochemistry and molecular biology. The purpose of this article is to evaluate the efficacy of forensic histopathology in pediatric forensic autopsies. We analyze the main causes of pediatric death in a forensic context. Between 2004 and 2015, 157 infant deaths were identified in Marseille university hospital. The forensic histopathology and autopsy reports of all 157 cases were available for systematic review. Medical or surgical causes represented 41,3% of deaths in our center, accidental causes 8.1% and child abuse 28,8%. The definitive diagnosis was made at autopsy in 30% of cases and at histopathological examination in 70% highlighting that forensic histopathology is an indispensable tool in pediatric medicolegal autopsies. Significant histological abnormalities may be detected in selected organs such as the brain, lungs, heart, liver, adrenal glands and kidneys in spite of macroscopically normal appearances. This justifies systematic sampling of all organs. Despite the implementation of the French sudden infant death protocol which recommends medical autopsies, too many pediatric autopsies are carried out in a medicolegal context. 30% of the cases remain without diagnosis at the end of the autopsy and histological examination. This number could be reduced by the contribution of others laboratory investigation. Copyright © 2017 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

First Digit Law and Its Application to Digital Forensics

NASA Astrophysics Data System (ADS)

Shi, Yun Q.

Digital data forensics, which gathers evidence of data composition, origin, and history, is crucial in our digital world. Although this new research field is still in its infancy stage, it has started to attract increasing attention from the multimedia-security research community. This lecture addresses the first digit law and its applications to digital forensics. First, the Benford and generalized Benford laws, referred to as first digit law, are introduced. Then, the application of first digit law to detection of JPEG compression history for a given BMP image and detection of double JPEG compressions are presented. Finally, applying first digit law to detection of double MPEG video compressions is discussed. It is expected that the first digit law may play an active role in other task of digital forensics. The lesson learned is that statistical models play an important role in digital forensics and for a specific forensic task different models may provide different performance.

Neural correlates of subliminally presented visual sexual stimuli.

PubMed

Wernicke, Martina; Hofter, Corinna; Jordan, Kirsten; Fromberger, Peter; Dechent, Peter; Müller, Jürgen L

2017-03-01

In the context of forensic psychiatry, it is crucial that diagnoses of deviant sexual interests are resistant to manipulation. In a first attempt to promote the development of such tools, the current fMRI study focusses on the examination of hemodynamic responses to preferred, in contrast to non-preferred, sexual stimuli with and without explicit sexual features in 24 healthy heterosexual subjects. The subliminal stimulus presentation of sexual stimuli could be a new approach to reduce vulnerability to manipulation. Meaningful images and scrambled images were applied as masks. Recognition performance was low, but interestingly, sexual preference and explicitness modulated stimulus visibility, suggesting interactions between networks of sexual arousal and consciousness. With scrambled masks, higher activations for sexually preferred images and for explicit images were found in areas associated with sexual arousal (Stoleru, Fonteille, Cornelis, Joyal, & Moulier, 2012). We conclude that masked sexual stimuli can evoke activations in areas associated with supraliminal induced sexual arousal. Copyright © 2017 Elsevier Inc. All rights reserved.

Steganalysis based on JPEG compatibility

NASA Astrophysics Data System (ADS)

Fridrich, Jessica; Goljan, Miroslav; Du, Rui

2001-11-01

In this paper, we introduce a new forensic tool that can reliably detect modifications in digital images, such as distortion due to steganography and watermarking, in images that were originally stored in the JPEG format. The JPEG compression leave unique fingerprints and serves as a fragile watermark enabling us to detect changes as small as modifying the LSB of one randomly chosen pixel. The detection of changes is based on investigating the compatibility of 8x8 blocks of pixels with JPEG compression with a given quantization matrix. The proposed steganalytic method is applicable to virtually all steganongraphic and watermarking algorithms with the exception of those that embed message bits into the quantized JPEG DCT coefficients. The method can also be used to estimate the size of the secret message and identify the pixels that carry message bits. As a consequence of our steganalysis, we strongly recommend avoiding using images that have been originally stored in the JPEG format as cover-images for spatial-domain steganography.

Founding editorial--forensics and TheScientificWorld.

PubMed

Rowe, W

2001-10-30

At the beginning of a new millennium it seems a good idea to stop for a moment and take stock of the current state of forensic science. As a field of scientific research and scientific application, forensic science is a little more than a century old. Forensic science may be said to have begun in 1887 with the simultaneous publication of A. Conan Doyle's A Study in Scarlet and Hans Gross's Handbuch f1/4r Untersuchungsrichter. Conan Doyle's novel introduced to the world the character of Sherlock Holmes, whose literary career would popularize the use of physical evidence in criminal investigations. Gross's manual for examining magistrates suggests ways in which the expertise of chemists, biologists, geologists, and other natural scientists could contribute to investigations. Gross's book was translated into a number of languages and went through various updated editions during the course of the century. The intervening century saw the development and application of fingerprinting, firearm and tool mark identification, forensic chemistry, forensic biology, forensic toxicology, forensic odontology, forensic pathology, and forensic engineering. Increasingly, the judicial systems of the industrial nations of the world have come to rely upon the expertise of scientists in a variety of disciplines. In most advanced countries, virtually all criminal prosecutions now involve the presentation of scientific testimony. This has had the beneficial effect of diminishing the reliance of courts on eyewitness testimony and defendant confessions.

Taxonomy of Challenges for Digital Forensics.

PubMed

Karie, Nickson M; Venter, Hein S

2015-07-01

Since its inception, over a decade ago, the field of digital forensics has faced numerous challenges. Despite different researchers and digital forensic practitioners having studied and analysed various known digital forensic challenges, as of 2013, there still exists a need for a formal classification of these challenges. This article therefore reviews existing research literature and highlights the various challenges that digital forensics has faced for the last 10 years. In conducting this research study, however, it was difficult for the authors to review all the existing research literature in the digital forensic domain; hence, sampling and randomization techniques were employed to facilitate the review of the gathered literature. Taxonomy of the various challenges is subsequently proposed in this paper based on our review of the literature. The taxonomy classifies the large number of digital forensic challenges into four well-defined and easily understood categories. The proposed taxonomy can be useful, for example, in future developments of automated digital forensic tools by explicitly describing processes and procedures that focus on addressing specific challenges identified in this paper. However, it should also be noted that the purpose of this paper was not to propose any solutions to the individual challenges that digital forensics face, but to serve as a survey of the state of the art of the research area. © 2015 American Academy of Forensic Sciences.

The development and practice of forensic podiatry.

PubMed

Vernon, Wesley

2006-01-01

Forensic podiatry is a small, but potentially useful specialty using clinical podiatric knowledge for the purpose of person identification. The practice of forensic podiatry began in the early 1970s in Canada and the UK, although supportive research commenced later in the 1990s. Techniques of forensic podiatry include identification from podiatry records, the human footprint, footwear, and the analysis of gait forms captured on Closed Circuit Television Cameras. The most valuable techniques relate to the comparison of the foot impressions inside shoes. Tools to describe, measure and compare foot impressions with footwear wear marks have been developed through research with potential for further development. The role of forensic podiatrists is of particular value when dealing with variable factors relating to the functioning and the shod foot. Case studies demonstrate the approach of podiatrists, in footwear identification, when comparing exemplar with questioned foot impressions. Forensic podiatry practice should be approached cautiously and it is essential for podiatrists undertaking this type of work to understand the context within which the process of person identification takes place.

Digital Stratigraphy: Contextual Analysis of File System Traces in Forensic Science.

PubMed

Casey, Eoghan

2017-12-28

This work introduces novel methods for conducting forensic analysis of file allocation traces, collectively called digital stratigraphy. These in-depth forensic analysis methods can provide insight into the origin, composition, distribution, and time frame of strata within storage media. Using case examples and empirical studies, this paper illuminates the successes, challenges, and limitations of digital stratigraphy. This study also shows how understanding file allocation methods can provide insight into concealment activities and how real-world computer usage can complicate digital stratigraphy. Furthermore, this work explains how forensic analysts have misinterpreted traces of normal file system behavior as indications of concealment activities. This work raises awareness of the value of taking the overall context into account when analyzing file system traces. This work calls for further research in this area and for forensic tools to provide necessary information for such contextual analysis, such as highlighting mass deletion, mass copying, and potential backdating. © 2017 American Academy of Forensic Sciences.

Evaluation of forensic genetic parameters of 12 STR loci in the Korean population using the InvestigatorⓇ HDplex kit.

PubMed

Jung, Ju Yeon; Kim, Eun Hye; Oh, Yu-Li; Park, Hyun-Chul; Hwang, Jung Ho; Lim, Si-Keun

2017-09-01

We genotyped and calculated the forensic parameters of 10 non-CODIS loci and 2 CODIS loci of 990 Korean individuals using the Investigator Ⓡ HDplex kit. No significant deviations from Hardy-Weinberg equilibrium (after Bonferroni correction for multiple testing) or genetic linkage disequilibrium were observed. The calculated matching probability and power of discrimination ranged from 0.0080 to 0.2014, and 0.7986 to 0.9920, respectively. We conclude that the markers of the kit are highly informative corroborative tools for forensic DNA analysis.

[Forensic toxicology, a growing scientific discipline].

PubMed

Augsburger, Marc; Staub, Christian

2008-07-02

Forensic toxicology has to bring evidence of substances that could have been involved directly or indirectly in the cause of death or that could influence the behaviour of somebody. The increase of the consumption of illegal and legal drugs in modern societies during last decades gave a boost to forensic toxicology. Moreover, improvement with analytical technology gave tools with high degrees of sensitivity and specificity for the screening and quantification of a large amount of substances in various biological specimens, even with very low concentration resulting of a single dose of medication.

Field-based detection of biological samples for forensic analysis: Established techniques, novel tools, and future innovations.

PubMed

Morrison, Jack; Watts, Giles; Hobbs, Glyn; Dawnay, Nick

2018-04-01

Field based forensic tests commonly provide information on the presence and identity of biological stains and can also support the identification of species. Such information can support downstream processing of forensic samples and generate rapid intelligence. These approaches have traditionally used chemical and immunological techniques to elicit the result but some are known to suffer from a lack of specificity and sensitivity. The last 10 years has seen the development of field-based genetic profiling systems, with specific focus on moving the mainstay of forensic genetic analysis, namely STR profiling, out of the laboratory and into the hands of the non-laboratory user. In doing so it is now possible for enforcement officers to generate a crime scene DNA profile which can then be matched to a reference or database profile. The introduction of these novel genetic platforms also allows for further development of new molecular assays aimed at answering the more traditional questions relating to body fluid identity and species detection. The current drive for field-based molecular tools is in response to the needs of the criminal justice system and enforcement agencies, and promises a step-change in how forensic evidence is processed. However, the adoption of such systems by the law enforcement community does not represent a new strategy in the way forensic science has integrated previous novel approaches. Nor do they automatically represent a threat to the quality control and assurance practices that are central to the field. This review examines the historical need and subsequent research and developmental breakthroughs in field-based forensic analysis over the past two decades with particular focus on genetic methods Emerging technologies from a range of scientific fields that have potential applications in forensic analysis at the crime scene are identified and associated issues that arise from the shift from laboratory into operational field use are discussed. Copyright © 2018 Elsevier B.V. All rights reserved.

Intelligent image capture of cartridge cases for firearms examiners

NASA Astrophysics Data System (ADS)

Jones, Brett C.; Guerci, Joseph R.

1997-02-01

The FBI's DRUGFIRETM system is a nationwide computerized networked image database of ballistic forensic evidence. This evidence includes images of cartridge cases and bullets obtained from both crime scenes and controlled test firings of seized weapons. Currently, the system is installed in over 80 forensic labs across the country and has enjoyed a high degree of success. In this paper, we discuss some of the issues and methods associated with providing a front-end semi-automated image capture system that simultaneously satisfies the often conflicting criteria of the many human examiners visual perception versus the criteria associated with optimizing autonomous digital image correlation. Specifically, we detail the proposed processing chain of an intelligent image capture system (IICS), involving a real- time capture 'assistant,' which assesses the quality of the image under test utilizing a custom designed neural network.

Blind Forensics of Successive Geometric Transformations in Digital Images Using Spectral Method: Theory and Applications.

PubMed

Chen, Chenglong; Ni, Jiangqun; Shen, Zhaoyi; Shi, Yun Qing

2017-06-01

Geometric transformations, such as resizing and rotation, are almost always needed when two or more images are spliced together to create convincing image forgeries. In recent years, researchers have developed many digital forensic techniques to identify these operations. Most previous works in this area focus on the analysis of images that have undergone single geometric transformations, e.g., resizing or rotation. In several recent works, researchers have addressed yet another practical and realistic situation: successive geometric transformations, e.g., repeated resizing, resizing-rotation, rotation-resizing, and repeated rotation. We will also concentrate on this topic in this paper. Specifically, we present an in-depth analysis in the frequency domain of the second-order statistics of the geometrically transformed images. We give an exact formulation of how the parameters of the first and second geometric transformations influence the appearance of periodic artifacts. The expected positions of characteristic resampling peaks are analytically derived. The theory developed here helps to address the gap left by previous works on this topic and is useful for image security and authentication, in particular, the forensics of geometric transformations in digital images. As an application of the developed theory, we present an effective method that allows one to distinguish between the aforementioned four different processing chains. The proposed method can further estimate all the geometric transformation parameters. This may provide useful clues for image forgery detection.

[Digital x-ray image processing as an aid in forensic medicine].

PubMed

Buitrago-Tellez, C; Wenz, W; Friedrich, G

1992-02-01

Radiology plays an important role in the identification of unknown corpses. Positive radiographic identification by comparison with antemortem films is an established technique in this setting. Technical defects together with non-well-preserved films make it sometimes difficult or even impossible to establish a confident comparison. Digital image processing after secondary digitalization of ante- and postmortem films represents an important development and aid in forensic medicine. The application of this method is demonstrated on a single case.

New perspectives in forensic anthropology.

PubMed

Dirkmaat, Dennis C; Cabo, Luis L; Ousley, Stephen D; Symes, Steven A

2008-01-01

A critical review of the conceptual and practical evolution of forensic anthropology during the last two decades serves to identify two key external factors and four tightly inter-related internal methodological advances that have significantly affected the discipline. These key developments have not only altered the current practice of forensic anthropology, but also its goals, objectives, scope, and definition. The development of DNA analysis techniques served to undermine the classic role of forensic anthropology as a field almost exclusively focused on victim identification. The introduction of the Daubert criteria in the courtroom presentation of scientific testimony accompanied the development of new human comparative samples and tools for data analysis and sharing, resulting in a vastly enhanced role for quantitative methods in human skeletal analysis. Additionally, new questions asked of forensic anthropologists, beyond identity, required sound scientific bases and expanded the scope of the field. This environment favored the incipient development of the interrelated fields of forensic taphonomy, forensic archaeology, and forensic trauma analysis, fields concerned with the reconstruction of events surrounding death. Far from representing the mere addition of new methodological techniques, these disciplines (especially, forensic taphonomy) provide forensic anthropology with a new conceptual framework, which is broader, deeper, and more solidly entrenched in the natural sciences. It is argued that this new framework represents a true paradigm shift, as it modifies not only the way in which classic forensic anthropological questions are answered, but also the goals and tasks of forensic anthropologists, and their perception of what can be considered a legitimate question or problem to be answered within the field.

Confocal Raman imaging and chemometrics applied to solve forensic document examination involving crossed lines and obliteration cases by a depth profiling study.

PubMed

Borba, Flávia de Souza Lins; Jawhari, Tariq; Saldanha Honorato, Ricardo; de Juan, Anna

2017-03-27

This article describes a non-destructive analytical method developed to solve forensic document examination problems involving crossed lines and obliteration. Different strategies combining confocal Raman imaging and multivariate curve resolution-alternating least squares (MCR-ALS) are presented. Multilayer images were acquired at subsequent depth layers into the samples. It is the first time that MCR-ALS is applied to multilayer images for forensic purposes. In this context, this method provides a single set of pure spectral ink signatures and related distribution maps for all layers examined from the sole information in the raw measurement. Four cases were investigated, namely, two concerning crossed lines with different degrees of ink similarity and two related to obliteration, where previous or no knowledge about the identity of the obliterated ink was available. In the crossing line scenario, MCR-ALS analysis revealed the ink nature and the chronological order in which strokes were drawn. For obliteration cases, results making active use of information about the identity of the obliterated ink in the chemometric analysis were of similar quality as those where the identity of the obliterated ink was unknown. In all obliteration scenarios, the identity of inks and the obliterated text were satisfactorily recovered. The analytical methodology proposed is of general use for analytical forensic document examination problems, and considers different degrees of complexity and prior available information. Besides, the strategies of data analysis proposed can be applicable to any other kind of problem in which multilayer Raman images from multicomponent systems have to be interpreted.

Forensic timber identification: It's time to integrate disciplines to combat illegal logging

Treesearch

Eleanor E. Dormontt; Markus Boner; Birgit Braun; Gerhard Breulmann; Bernd Degen; Edgard Espinoza; Shelley Gardner; Phil Guillery; John C. Hermanson; Gerald Koch; Soon Leong Lee; Milton Kanashiro; Anto Rimbawanto; Darren Thomas; Alex C. Wiedenhoeft; Yafang Yin; Johannes Zahnen; Andrew J. Lowe

2015-01-01

The prosecution of illegal logging crimes is hampered by a lack of available forensic timber identification tools, both for screening of suspectmaterial and definitive identification of illegally sourcedwood. Reputable timber traders are also struggling to police their own supply chains and comply with the growing requirement for due diligence with respect to timber...

Microbial forensics: the next forensic challenge.

PubMed

Budowle, Bruce; Murch, Randall; Chakraborty, Ranajit

2005-11-01

Pathogens and toxins can be converted to bioweapons and used to commit bioterrorism and biocrime. Because of the potential and relative ease of an attack using a bioweapon, forensic science needs to be prepared to assist in the investigation to bring perpetrators to justice and to deter future attacks. A new subfield of forensics--microbial forensics--has been created, which is focused on characterization of evidence from a bioterrorism act, biocrime, hoax, or an inadvertent release. Forensic microbiological investigations are essentially the same as any other forensic investigation regarding processing. They involve crime scene(s) investigation, chain of custody practices, evidence collection, handling and preservation, evidence shipping, analysis of evidence, interpretation of results, and court presentation. In addition to collecting and analyzing traditional forensic evidence, the forensic investigation will attempt to determine the etiology and identity of the causal agent, often in a similar fashion as in an epidemiologic investigation. However, for attribution, higher-resolution characterization is needed. The tools for attribution include genetic- and nongenetic-based assays and informatics to attempt to determine the unique source of a sample or at least eliminate some sources. In addition, chemical and physical assays may help determine the process used to prepare, store, or disseminate the bioweapon. An effective microbial forensics program will require development and/or validation of all aspects of the forensic investigative process, from sample collection to interpretation of results. Quality assurance (QA) and QC practices, comparable to those used by the forensic DNA science community, are being implemented. Lastly, partnerships with other laboratories will be requisite, because many of the necessary capabilities for analysis will not reside in the traditional forensic laboratory.

A forensic identification case and DPid - can it be a useful tool?

PubMed Central

de QUEIROZ, Cristhiane Leão; BOSTOCK, Ellen Marie; SANTOS, Carlos Ferreira; GUIMARÃES, Marco Aurélio; da SILVA, Ricardo Henrique Alves

2017-01-01

Abstract Objective The aim of this study was to show DPid as an important tool of potential application to solve cases with dental prosthesis, such as the forensic case reported, in which a skull, denture and dental records were received for analysis. Material and Methods Human identification is still challenging in various circumstances and Dental Prosthetics Identification (DPid) stores the patient’s name and prosthesis information and provides access through an embedded code in dental prosthesis or an identification card. All of this information is digitally stored on servers accessible only by dentists, laboratory technicians and patients with their own level of secure access. DPid provides a complete single-source list of all dental prosthesis features (materials and components) under complete and secure documentation used for clinical follow-up and for human identification. Results and Conclusion If DPid tool was present in this forensic case, it could have been solved without requirement of DNA exam, which confirmed the dental comparison of antemortem and postmortem records, and concluded the case as a positive identification. PMID:28678955

Objective structured practical examination (OSPE) in Forensic Medicine: students' point of view.

PubMed

Menezes, Ritesh G; Nayak, Vinod C; Binu, V S; Kanchan, Tanuj; Rao, P P Jagadish; Baral, Prakash; Lobo, Stany W

2011-11-01

The purpose of this study was to assess the attitudes of undergraduate medical students towards the objective structured practical examination (OSPE) in Forensic Medicine, in a medical college in Nepal. Participants included 59 undergraduate medical students of the 7th semester. Findings indicated that the OSPE was an acceptable tool considering the conduct of practical examination in Forensic Medicine at the undergraduate level. The overall mean attitude score was towards the favourable side. Students strongly agreed that the OSPE tested a wide range of skills. They also strongly agreed that it was a good form of examination as well as a learning experience. The introduction of the OSPE replacing the conventional method of practical examination in Forensic Medicine is a step in the right direction taken to objectively assess undergraduate medical students. Copyright © 2011 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Human Factors Effecting Forensic Decision Making: Workplace Stress and Well-being.

PubMed

Jeanguenat, Amy M; Dror, Itiel E

2018-01-01

Over the past decade, there has been a growing openness about the importance of human factors in forensic work. However, most of it focused on cognitive bias, and neglected issues of workplace wellness and stress. Forensic scientists work in a dynamic environment that includes common workplace pressures such as workload volume, tight deadlines, lack of advancement, number of working hours, low salary, technology distractions, and fluctuating priorities. However, in addition, forensic scientists also encounter a number of industry-specific pressures, such as technique criticism, repeated exposure to crime scenes or horrific case details, access to funding, working in an adversarial legal system, and zero tolerance for "errors". Thus, stress is an important human factor to mitigate for overall error management, productivity and decision quality (not to mention the well-being of the examiners themselves). Techniques such as mindfulness can become powerful tools to enhance work and decision quality. © 2017 American Academy of Forensic Sciences.

Efficacy of Sex Determination from Human Dental Pulp Tissue and its Reliability as a Tool in Forensic Dentistry.

PubMed

Khanna, Kaveri Surya

2015-01-01

Sex determination is one of the primary steps in forensics. Barr body can be used as a histological method for identification of sex as it is found to be specific to female somatic cells and rare in male cells. To demarcate human dental pulp as an important identification tool of sex in forensic odontology (FO) and to evaluate the time period till which sex can be determined from pulp tissue using three stains H and E, Feulgen, and acridine - orange under fluorescence so as. 90 pulp samples (45 males and 45 females) were subjected to Barr body analysis for determination of sex using light and fluorescent microscopy. Barr body was found to be positive for female samples and negative or rare in the male sample (<3%). Barr body from human dental pulp tissue can be used as a successful determinant of sex identification in FO.

Concordance Rate for the Identification of Distant Entrance Gunshot Wounds of the Back by Experienced Forensic Pathologists Examining Only Images of Autopsies.

PubMed

Heninger, Michael

2016-03-01

The images of 66 gunshot entrance wounds with a defect on the back, a bullet in the body, hemorrhage along the wound track, and logical certainty that it was an entrance wound were collected from the files of a moderately busy medical examiner's office. Participants numbering 22 board-certified forensic pathologists viewed a single digital archival image of each of the 66 entrance wounds randomly mixed with 74 presumptive exit wounds to determine whether they were entrance or exit wounds. The concordance rate for correctly identifying the 66 logically known entrance wounds was 82.8% with a range from 58% to 97%. This pilot study was conducted to provide an evidence-based approach to the interpretation of the direction of gunshot wounds by reviewing pathologists with access only to archival photographs, and it is not a measure of the accuracy to distinguish entrance from exit wounds when given all of the circumstances. © 2016 American Academy of Forensic Sciences.

Evaluation of the impact of genetic linkage in forensic identity and relationship testing for expanded DNA marker sets.

PubMed

Tillmar, Andreas O; Phillips, Chris

2017-01-01

Advances in massively parallel sequencing technology have enabled the combination of a much-expanded number of DNA markers (notably STRs and SNPs in one or combined multiplexes), with the aim of increasing the weight of evidence in forensic casework. However, when data from multiple loci on the same chromosome are used, genetic linkage can affect the final likelihood calculation. In order to study the effect of linkage for different sets of markers we developed the biostatistical tool ILIR, (Impact of Linkage on forensic markers for Identity and Relationship tests). The ILIR tool can be used to study the overall impact of genetic linkage for an arbitrary set of markers used in forensic testing. Application of ILIR can be useful during marker selection and design of new marker panels, as well as being highly relevant for existing marker sets as a way to properly evaluate the effects of linkage on a case-by-case basis. ILIR, implemented via the open source platform R, includes variation and genomic position reference data for over 40 STRs and 140 SNPs, combined with the ability to include additional forensic markers of interest. The use of the software is demonstrated with examples from several different established marker sets (such as the expanded CODIS core loci) including a review of the interpretation of linked genetic data. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The evaluation and validation of Phadebas® paper as a presumptive screening tool for saliva on forensic exhibits.

PubMed

Wornes, Danielle J; Speers, Samuel J; Murakami, Julie A

2018-07-01

The Phadebas ® Forensic Press Test is routinely used for the detection of saliva. However, assessment of the use of Phadebas ® paper for this purpose has not been studied extensively. The suitability of Phadebas ® paper as a presumptive screening tool for saliva on forensic exhibits, was investigated by analysing the following: (1) sensitivity, (2) specificity, (3) effects of temperature on sensitivity and specificity, (4) detection of saliva in mixed body fluid samples, and (5) influence of substrate porosity. The results of this study demonstrated that Phadebas ® paper is more sensitive to α-amylase activity and less specific for saliva than previously reported. The use of an examination temperature of 37°C had no effect on sensitivity, but increased the incidence of cross-reactivity with other forensically relevant body fluid stains. Blood, urine and vaginal secretions can inhibit the detection of α-amylase activity with Phadebas ® paper in mixed stains of saliva and body fluid. Substrate porosity is a weak predictor for the time taken for a saliva stain to achieve a strong positive result on Phadebas ® paper. Overall, this study demonstrated that the Phadebas ® Forensic Press Test has limitations as a presumptive test for the accurate identification of saliva. Copyright © 2018 Elsevier B.V. All rights reserved.

The applicability of holography in forensic identification: a fusion of the traditional optical technique and digital technique.

PubMed

Biwasaka, Hitoshi; Saigusa, Kiyoshi; Aoki, Yasuhiro

2005-03-01

In this study, the applicability of holography in the 3-dimensional recording of forensic objects such as skulls and mandibulae, and the accuracy of the reconstructed 3-D images, were examined. The virtual holographic image, which records the 3-dimensional data of the original object, is visually observed on the other side of the holographic plate, and reproduces the 3-dimensional shape of the object well. Another type of holographic image, the real image, is focused on a frosted glass screen, and cross-sectional images of the object can be observed. When measuring the distances between anatomical reference points using an image-processing software, the average deviations in the holographic images as compared to the actual objects were less than 0.1 mm. Therefore, holography could be useful as a 3-dimensional recording method of forensic objects. Two superimposition systems using holographic images were examined. In the 2D-3D system, the transparent virtual holographic image of an object is directly superimposed onto the digitized photograph of the same object on the LCD monitor. On the other hand, in the video system, the holographic image captured by the CCD camera is superimposed onto the digitized photographic image using a personal computer. We found that the discrepancy between the outlines of the superimposed holographic and photographic dental images using the video system was smaller than that using the 2D-3D system. Holography seemed to perform comparably to the computer graphic system; however, a fusion with the digital technique would expand the utility of holography in superimposition.

Forensic Mass Spectrometry

NASA Astrophysics Data System (ADS)

Hoffmann, William D.; Jackson, Glen P.

2015-07-01

Developments in forensic mass spectrometry tend to follow, rather than lead, the developments in other disciplines. Examples of techniques having forensic potential born independently of forensic applications include ambient ionization, imaging mass spectrometry, isotope ratio mass spectrometry, portable mass spectrometers, and hyphenated chromatography-mass spectrometry instruments, to name a few. Forensic science has the potential to benefit enormously from developments that are funded by other means, if only the infrastructure and personnel existed to adopt, validate, and implement the new technologies into casework. Perhaps one unique area in which forensic science is at the cutting edge is in the area of chemometrics and the determination of likelihood ratios for the evaluation of the weight of evidence. Such statistical techniques have been developed most extensively for ignitable-liquid residue analyses and isotope ratio analysis. This review attempts to capture the trends, motivating forces, and likely impact of developing areas of forensic mass spectrometry, with the caveat that none of this research is likely to have any real impact in the forensic community unless: (a) The instruments developed are turned into robust black boxes with red and green lights for positives and negatives, respectively, or (b) there are PhD graduates in the workforce who can help adopt these sophisticated techniques.

Criminal Regulation of Anti-Forensic Tools in Japan

NASA Astrophysics Data System (ADS)

Ishii, Tetsuya

This paper discusses the continuing landmark debate in a Japanese Court concerning the development and distribution of a peer-to-peer (P2P) file sharing program. The program, known as Winny, facilitates illegal activities such as piracy and the distribution of child pornography because of the encryption and anonymity afforded to users. The court has to determine whether Isamu Kaneko, the designer of Winny, is criminally liable for developing and distributing the program. This paper also assesses whether the judgment in the Winny case might set a precedent for regulating the creation and distribution of anti-forensic tools.

Forensic print extraction using 3D technology and its processing

NASA Astrophysics Data System (ADS)

Rajeev, Srijith; Shreyas, Kamath K. M.; Panetta, Karen; Agaian, Sos S.

2017-05-01

Biometric evidence plays a crucial role in criminal scene analysis. Forensic prints can be extracted from any solid surface such as firearms, doorknobs, carpets and mugs. Prints such as fingerprints, palm prints, footprints and lip-prints can be classified into patent, latent, and three-dimensional plastic prints. Traditionally, law enforcement officers capture these forensic traits using an electronic device or extract them manually, and save the data electronically using special scanners. The reliability and accuracy of the method depends on the ability of the officer or the electronic device to extract and analyze the data. Furthermore, the 2-D acquisition and processing system is laborious and cumbersome. This can lead to the increase in false positive and true negative rates in print matching. In this paper, a method and system to extract forensic prints from any surface, irrespective of its shape, is presented. First, a suitable 3-D camera is used to capture images of the forensic print, and then the 3-D image is processed and unwrapped to obtain 2-D equivalent biometric prints. Computer simulations demonstrate the effectiveness of using 3-D technology for biometric matching of fingerprints, palm prints, and lip-prints. This system can be further extended to other biometric and non-biometric modalities.

A novel method for detecting light source for digital images forensic

NASA Astrophysics Data System (ADS)

Roy, A. K.; Mitra, S. K.; Agrawal, R.

2011-06-01

Manipulation in image has been in practice since centuries. These manipulated images are intended to alter facts — facts of ethics, morality, politics, sex, celebrity or chaos. Image forensic science is used to detect these manipulations in a digital image. There are several standard ways to analyze an image for manipulation. Each one has some limitation. Also very rarely any method tried to capitalize on the way image was taken by the camera. We propose a new method that is based on light and its shade as light and shade are the fundamental input resources that may carry all the information of the image. The proposed method measures the direction of light source and uses the light based technique for identification of any intentional partial manipulation in the said digital image. The method is tested for known manipulated images to correctly identify the light sources. The light source of an image is measured in terms of angle. The experimental results show the robustness of the methodology.

Bayesian networks for evaluation of evidence from forensic entomology.

PubMed

Andersson, M Gunnar; Sundström, Anders; Lindström, Anders

2013-09-01

In the aftermath of a CBRN incident, there is an urgent need to reconstruct events in order to bring the perpetrators to court and to take preventive actions for the future. The challenge is to discriminate, based on available information, between alternative scenarios. Forensic interpretation is used to evaluate to what extent results from the forensic investigation favor the prosecutors' or the defendants' arguments, using the framework of Bayesian hypothesis testing. Recently, several new scientific disciplines have been used in a forensic context. In the AniBioThreat project, the framework was applied to veterinary forensic pathology, tracing of pathogenic microorganisms, and forensic entomology. Forensic entomology is an important tool for estimating the postmortem interval in, for example, homicide investigations as a complement to more traditional methods. In this article we demonstrate the applicability of the Bayesian framework for evaluating entomological evidence in a forensic investigation through the analysis of a hypothetical scenario involving suspect movement of carcasses from a clandestine laboratory. Probabilities of different findings under the alternative hypotheses were estimated using a combination of statistical analysis of data, expert knowledge, and simulation, and entomological findings are used to update the beliefs about the prosecutors' and defendants' hypotheses and to calculate the value of evidence. The Bayesian framework proved useful for evaluating complex hypotheses using findings from several insect species, accounting for uncertainty about development rate, temperature, and precolonization. The applicability of the forensic statistic approach to evaluating forensic results from a CBRN incident is discussed.

Soil DNA metabarcoding and high-throughput sequencing as a forensic tool: considerations, potential limitations and recommendations.

PubMed

Young, J M; Austin, J J; Weyrich, L S

2017-02-01

Analysis of physical evidence is typically a deciding factor in forensic casework by establishing what transpired at a scene or who was involved. Forensic geoscience is an emerging multi-disciplinary science that can offer significant benefits to forensic investigations. Soil is a powerful, nearly 'ideal' contact trace evidence, as it is highly individualistic, easy to characterise, has a high transfer and retention probability, and is often overlooked in attempts to conceal evidence. However, many real-life cases encounter close proximity soil samples or soils with low inorganic content, which cannot be easily discriminated based on current physical and chemical analysis techniques. The capability to improve forensic soil discrimination, and identify key indicator taxa from soil using the organic fraction is currently lacking. The development of new DNA sequencing technologies offers the ability to generate detailed genetic profiles from soils and enhance current forensic soil analyses. Here, we discuss the use of DNA metabarcoding combined with high-throughput sequencing (HTS) technology to distinguish between soils from different locations in a forensic context. Specifically, we provide recommendations for best practice, outline the potential limitations encountered in a forensic context and describe the future directions required to integrate soil DNA analysis into casework. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Hyperspectral imaging coupled with chemometric analysis for non-invasive differentiation of black pens

NASA Astrophysics Data System (ADS)

Chlebda, Damian K.; Majda, Alicja; Łojewski, Tomasz; Łojewska, Joanna

2016-11-01

Differentiation of the written text can be performed with a non-invasive and non-contact tool that connects conventional imaging methods with spectroscopy. Hyperspectral imaging (HSI) is a relatively new and rapid analytical technique that can be applied in forensic science disciplines. It allows an image of the sample to be acquired, with full spectral information within every pixel. For this paper, HSI and three statistical methods (hierarchical cluster analysis, principal component analysis, and spectral angle mapper) were used to distinguish between traces of modern black gel pen inks. Non-invasiveness and high efficiency are among the unquestionable advantages of ink differentiation using HSI. It is also less time-consuming than traditional methods such as chromatography. In this study, a set of 45 modern gel pen ink marks deposited on a paper sheet were registered. The spectral characteristics embodied in every pixel were extracted from an image and analysed using statistical methods, externally and directly on the hypercube. As a result, different black gel inks deposited on paper can be distinguished and classified into several groups, in a non-invasive manner.

Optograms and criminology: science, news reporting, and fanciful novels.

PubMed

Lanska, Douglas J

2013-01-01

A persistent nineteenth-century urban legend was the notion that photograph-like images of the last-seen object or person would be preserved in the eyes of the dead. This popular notion followed technological developments (the daguerreotype and ophthalmoscope) that antedated by decades a basic understanding of retinal physiology. From 1876 to 1877, Boll described photochemical bleaching of the retina and produced a crude retinal image that remained briefly visible after death in an experimental animal. From 1877 to 1881, Kühne elaborated the processes involved in photochemical transduction, and created more complex retinal images, or "optograms," that were visible after the death of experimental animals under special laboratory circumstances. In 1880, Kühne reported the first human "optogram" when he examined the eyes following the state execution of a convicted murderer. Although the work of these physiologists increased public interest in "optography" as a potential tool in forensic investigations, Kühne and his student, Ayres, concluded after an extensive series of investigations that optography would never be useful for this purpose. Nevertheless, because of the prior tantalizing results, optography became a frequent consideration in speculative news reports of sensational unsolved murders, and as a plot device in works of fiction, some quite fantastical. Fictional portrayals included works by Rudyard Kipling and Jules Verne. Despite denouncement of optography for forensic investigations by Kühne, and by numerous physicians, the general public and mass media continued to press for examination of the retinae of murder victims well into the twentieth century, particularly in high-profile unsolved cases. © 2013 Elsevier B.V. All rights reserved.

Reliability and Validity of the Dutch Version of the Behavioural Status Index: A Nurse-Rated Forensic Assessment Tool

ERIC Educational Resources Information Center

Chakhssi, Farid; de Ruiter, Corine; Bernstein, David

2010-01-01

The Behavioural Status Index (BEST-Index) has been introduced into Dutch forensic psychiatry to measure change in risk level of future violence. The BEST-Index is a structured observational measure that assesses aggressive behavior, degree of insight, social skills, self-care, and work and leisure skills during inpatient treatment. Thus far,…

Applied dendroecology and environmental forensics. Characterizing and age dating environmental releases: fundamentals and case studies

Treesearch

Jean-Christophe Balouet; Gil Oudijk; Kevin T. Smith; Ioana Petrisor; Hakan Grudd; Bengt Stocklassa

2007-01-01

Dendroecology, or the use of ring patterns to assess the age of trees and environmental factors controlling their growth, is a well-developed method in climatologic studies. This method holds great potential as a forensic tool for age dating, contamination assessment, and characterization of releases. Moreover, the method is independent of the physical presence of...

Public Perceptions and Expectations of the Forensic Use of DNA: Results of a Preliminary Study

ERIC Educational Resources Information Center

Curtis, Cate

2009-01-01

The forensic use of Deoxyribonucleic Acid (DNA) is demonstrating significant success as a crime-solving tool. However, numerous concerns have been raised regarding the potential for DNA use to contravene cultural, ethical, and legal codes. In this article the expectations and level of knowledge of the New Zealand public of the DNA data-bank and…

[The use of computer technology and digital photography in the work of a forensic medical expertise bureau].

PubMed

Novoselov, V P; Fedorov, S A

1999-01-01

UNISCAN scanner with PC was used at department of medical criminology and at the histological department of the Novosibirsk Regional Bureau of Forensic Medical Expert Evaluations. The quality of images obtained by computers and digital photography is not inferior to that of traditional photographs.

Photographic documentation, a practical guide for non professional forensic photography.

PubMed

Ozkalipci, Onder; Volpellier, Muriel

2010-01-01

Forensic photography is essential for documentation of evidence of torture. Consent of the alleged victim should be sought in all cases. The article gives information about when and how to take pictures of what as well as image authentication, audit trail, storage, faulty pictures and the kind of camera to use.

Optimising the measurement of bruises in children across conventional and cross polarized images using segmentation analysis techniques in Image J, Photoshop and circle diameter measurements.

PubMed

Harris, C; Alcock, A; Trefan, L; Nuttall, D; Evans, S T; Maguire, S; Kemp, A M

2018-02-01

Bruising is a common abusive injury in children, and it is standard practice to image and measure them, yet there is no current standard for measuring bruise size consistently. We aim to identify the optimal method of measuring photographic images of bruises, including computerised measurement techniques. 24 children aged <11 years (mean age of 6.9, range 2.5-10 years) with a bruise were recruited from the community. Demographics and bruise details were recorded. Each bruise was measured in vivo using a paper measuring tape. Standardised conventional and cross polarized digital images were obtained. The diameter of bruise images were measured by three computer aided measurement techniques: Image J (segmentation with Simple Interactive Object Extraction (maximum Feret diameter), 'Circular Selection Tool' (Circle diameter), & the Photoshop 'ruler' software (Photoshop diameter)). Inter and intra-observer effects were determined by two individuals repeating 11 electronic measurements, and relevant Intraclass Correlation Coefficient's (ICC's) were used to establish reliability. Spearman's rank correlation was used to compare in vivo with computerised measurements; a comparison of measurement techniques across imaging modalities was conducted using Kolmogorov-Smirnov tests. Significance was set at p < 0.05 for all tests. Images were available for 38 bruises in vivo, with 48 bruises visible on cross polarized imaging and 46 on conventional imaging (some bruises interpreted as being single in vivo appeared to be multiple in digital images). Correlation coefficients were >0.5 for all techniques, with maximum Feret diameter and maximum Photoshop diameter on conventional images having the strongest correlation with in vivo measurements. There were significant differences between in vivo and computer-aided measurements, but none between different computer-aided measurement techniques. Overall, computer aided measurements appeared larger than in vivo. Inter- and intra-observer agreement was high for all maximum diameter measurements (ICC's > 0.7). Whilst there are minimal differences between measurements of images obtained, the most consistent results were obtained when conventional images, segmented by Image J Software, were measured with a Feret diameter. This is therefore proposed as a standard for future research, and forensic practice, with the proviso that all computer aided measurements appear larger than in vivo. Copyright © 2018 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Virtopsy: Touch-free autopsy.

PubMed

Badam, Raj Kumar; Sownetha, Triekan; Babu, D B Gandhi; Waghray, Shefali; Reddy, Lavanya; Garlapati, Komali; Chavva, Sunanda

2017-01-01

The word "autopsy" denotes "to see with own eyes." Autopsy (postmortem) is a process that includes a thorough examination of a corpse noting everything related to anatomization, surface wounds, histological and culture studies. Virtopsy is a term extracted from two words "virtual" and "autopsy." It employs imaging methods that are routinely used in clinical medicine such as computed tomography and magnetic resonance imaging in the field of autopsy, to find the reason for death. Virtopsy is a multi-disciplinary technology that combines forensic medicine and pathology, roentgenology, computer graphics, biomechanics, and physics. It is rapidly gaining importance in the field of forensics. This approach has been recently used by forensic odontologists, but yet to make its own mark in the field. This article mainly deals with "virtopsy" where in various articles were web searched, relevant data was selected, extracted, and summarized here.

Sudden aortic death-proposal for a comprehensive diagnostic approach in forensic and in clinical pathology practice.

PubMed

de Boer, Hans H; Dedouit, Fabrice; Chappex, Nina; van der Wal, Allard C; Michaud, Katarzyna

2017-11-01

Aortic rupture or dissection as immediate cause of sudden death is encountered in forensic and clinical autopsy practice. Despite a common denominator of 'sudden aortic death' (SAD), we expect that in both settings the diagnostic workup, being either primarily legal or primarily disease related, differs substantially, which may affect the eventual diagnoses. We retrospectively reviewed case records of deceased persons who fitted a diagnosis of SAD in the continuous autopsy cohorts in a forensic (Suisse) and a clinical setting (The Netherlands). Clinical characteristics, data from post-mortem imaging, tissue blocks for histological analysis and results of ancillary studies were reviewed for its presence and outcome. SAD was found in 7.7% in the forensic versus 2.2% in the clinical autopsies. In the forensic setting, autopsy was always combined with post-mortem imaging, showing variable outcome on detection of aortic disruption and/or pericardial bleeding. Histology of aorta was performed in 12/35 cases, mostly in the natural deaths. In the clinical setting, histology of the aorta was available in all cases, but post-mortem imaging in none. In both settings, underlying aortic disease was mostly cystic medial degeneration, atherosclerosis or a combination of both, with occasional rare unexpected diagnosis. Also in both, a genetic cause of aortic dissection was revealed in a minority (three cases). Sudden aortic death (SAD) is more commonly encountered in a forensic than in a clinical setting. Major differences in the approach of SAD between these settings coincide with similarities in causes of death and underlying diseases. To ensure a correct diagnosis, we recommend that the investigation of SAD includes a study of the medical history, a full autopsy with histology of major organs including aorta, and storage of material for toxicological and genetic testing. Post-mortem radiological examination, useful for documentation and screening purposes, is feasible as non-invasive alternative when autopsy is not possible, but cannot substitute a full autopsy.

The Miami Barrel: An Innovation in Forensic Firearms Identification

ERIC Educational Resources Information Center

Fadul, Thomas G., Jr.

2009-01-01

The scientific foundation in firearm and tool mark identification is that each firearm/tool produces a signature of identification (striation/impression) that is unique to that firearm/tool, and through examining the individual striations/impressions; the signature can be positively identified to the firearm/tool that produced it. There is no set…

Factors influencing post-traumatic stress in Korean forensic science investigators.

PubMed

Yoo, Yang-Sook; Cho, Ok-Hee; Cha, Kyeong-Sook; Boo, Yun-Jeong

2013-09-01

The aim of this study was to understand factors that influence post-traumatic stress (PTS) in Korean forensic science investigators. A total of 111 forensic science investigators were recruited in Korea. PTS was measured using the tool modified by Choi (2001) from the original developed by Foa, Riggs, Dancu, and Rothbaum (1993) based on DSM-IV. Factors influencing PTS included demographic and job-related characteristics, emotional intelligence, and death anxiety. PTS scores were positively correlated with personality type, fatigue from work, and death anxiety. PTS scores were negatively correlated with length of career as a forensic science investigator and emotional intelligence. The factors that had the greatest influence on PTS were death anxiety, years spent as a forensic science investigator, personality type, emotional intelligence, fatigue, and homicide experience. The explanatory power of these six factors was 44.0%. Therefore, it is necessary to regularly evaluate the mental health of those who are vulnerable to PTS. Based on these results, various interventions could be implemented for promoting overall health of the forensic science investigators. Copyright © 2013. Published by Elsevier B.V.

Imaging and virtual autopsy: looking back and forward

PubMed Central

Bolliger, Stephan A.; Thali, Michael J.

2015-01-01

In order to create a three-dimensional (3D) documentation of findings which can be reassessed if necessary by other experts, the research project ‘Virtopsy®’ was launched in the late 1990s. This project combined autopsy results with forensic imaging in the form of computed tomography, magnetic resonance tomography and 3D surface scanning. The success of this project eventually succeeded in convincing the courts in Switzerland to accept these novel methods as evidence. As opposition towards autopsies has grown over the last decades, Virtopsy also strives to find and elaborate additional methods which can answer the main forensic questions without autopsy. These methods comprise post-mortem angiography for illustration of the vascular bed and image-guided tissue and fluid sampling for histological, toxicological and microbiological examinations. Based on the promising results, post-mortem imaging, especially with 3D surface scanning, has meanwhile also been applied to living victims of assault, who have suffered patterned injuries due to bites, blows with objects, etc. In our opinion, forensic imaging is an objective method which offers the possibility for a reassessment of the findings by other experts, even after burial or cremation of the corpse, or healing of the injuries in living victims, thus leading to a greater security in court. PMID:26101279

Mild traumatic brain injury: is diffusion imaging ready for primetime in forensic medicine?

PubMed

Grossman, Elan J; Inglese, Matilde; Bammer, Roland

2010-12-01

Mild traumatic brain injury (MTBI) is difficult to accurately assess with conventional imaging because such approaches usually fail to detect any evidence of brain damage. Recent studies of MTBI patients using diffusion-weighted imaging and diffusion tensor imaging suggest that these techniques have the potential to help grade tissue damage severity, track its development, and provide prognostic markers for clinical outcome. Although these results are promising and indicate that the forensic diagnosis of MTBI might eventually benefit from the use of diffusion-weighted imaging and diffusion tensor imaging, healthy skepticism and caution should be exercised with regard to interpreting their meaning because there is no consensus about which methods of data analysis to use and very few investigations have been conducted, of which most have been small in sample size and examined patients at only one time point after injury.

[Forensic medicine and the overlap with pathology].

PubMed

Riepert, T

2010-07-01

Forensic medicine incorporates research, teaching and professional service. In the routine practice this encompasses interdisciplinary cooperation with physicians, natural scientists and the legal profession. Lectures in forensic medicine include the correct performance of an external examination of corpses, which every physician must be capable of, just as medical questions and the evidential documentation of injuries. Clinical forensic medicine encompasses the examination and documentation of living victims of physical and/or sexual violence. For further training to become a specialist for forensic medicine it is mandatory to undertake a 6-month training period in pathology. Fatalities with an unclear or unnatural manner of death must be registered with the police. On suspicion of third party involvement the public prosecutor will request a legal autopsy, which is carried out and documented by two physicians in accordance with the penal code. Imaging procedures are standard for an autopsy. Extensive samples are taken for additional testing, such as toxicological and molecular biological investigations.

[Self-regulation and virtual reality in forensic psychiatry: An emphasis on theoretical underpinnings].

PubMed

Benbouriche, M; Renaud, P; Pelletier, J-F; De Loor, P

2016-12-01

Forensic psychiatry is the field whose expertise is the assessment and treatment of offending behaviours, in particular when offenses are related to mental illness. An underlying question for all etiological models concerns the manner in which an individual's behaviours are organized. Specifically, it becomes crucial to understand how certain individuals come to display maladaptive behaviours in a given environment, especially when considering issues such as offenders' responsibility and their ability to change their behaviours. Thanks to its ability to generate specific environments, associated with a high experimental control on generated simulations, virtual reality is gaining recognition in forensic psychiatry. Virtual reality has generated promising research data and may turn out to be a remarkable clinical tool in the near future. While research has increased, a conceptual work about its theoretical underpinnings is still lacking. However, no important benefit should be expected from the introduction of a new tool (as innovative as virtual reality) without an explicit and heuristic theoretical framework capable of clarifying its benefits in forensic psychiatry. Our paper introduces self-regulation perspective as the most suitable theoretical framework for virtual reality in forensic psychiatry. It will be argued that virtual reality does not solely help to increase ecological validity. However, it does allow one to grant access to an improved understanding of violent offending behaviours by probing into the underlying mechanisms involved in the self-regulation of behaviours in a dynamical environment. Illustrations are given as well as a discussion regarding perspectives in the use of virtual reality in forensic psychiatry. Copyright © 2015 L’Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

Morphometric analysis of sex differences in contemporary Japanese pelves using multidetector computed tomography.

PubMed

Torimitsu, Suguru; Makino, Yohsuke; Saitoh, Hisako; Sakuma, Ayaka; Ishii, Namiko; Yajima, Daisuke; Inokuchi, Go; Motomura, Ayumi; Chiba, Fumiko; Yamaguchi, Rutsuko; Hashimoto, Mari; Hoshioka, Yumi; Iwase, Hirotaro

2015-12-01

Sex estimation of decomposed or skeletal remains is clearly important in forensic contexts. Recently, contemporary population-specific data has been obtained using multidetector computed tomography (MDCT) scanning. The main purpose of this study was to investigate skeletal pelvic dimorphism in a contemporary Japanese forensic sample and to quantify the accuracy of sex estimation using various pelvic measurements obtained from three-dimensional (3D) CT images. This study used a total of 208 cadavers (104 males, 104 females) of which postmortem CT scanning and subsequent forensic autopsy were conducted between December 2011 and August 2014. Eleven measurements of each pelvis were obtained from 3D CT reconstructed images that extracted only bone data. The measurements were analyzed using descriptive statistics and discriminant function analyses. All except one measurement were dimorphic in terms of sex differences. Univariate discriminant function analyses using these measurements provided sex classification accuracy rates of 62.0-98.1%. The subpubic angle was found to contribute most significantly to accurate sex estimation. Multivariate discriminant functions yielded sex prediction accuracy rates of 63.9-98.1%. In conclusion, the pelvic measurements obtained from 3D CT images of a contemporary Japanese population successfully demonstrated sexual dimorphism and may be useful for the estimation of skeletal sex in the field of forensic anthropology. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Efficient estimation and large-scale evaluation of lateral chromatic aberration for digital image forensics

NASA Astrophysics Data System (ADS)

Gloe, Thomas; Borowka, Karsten; Winkler, Antje

2010-01-01

The analysis of lateral chromatic aberration forms another ingredient for a well equipped toolbox of an image forensic investigator. Previous work proposed its application to forgery detection1 and image source identification.2 This paper takes a closer look on the current state-of-the-art method to analyse lateral chromatic aberration and presents a new approach to estimate lateral chromatic aberration in a runtime-efficient way. Employing a set of 11 different camera models including 43 devices, the characteristic of lateral chromatic aberration is investigated in a large-scale. The reported results point to general difficulties that have to be considered in real world investigations.

Research in Computer Forensics

DTIC Science & Technology

2002-06-01

systems and how they can aid in the recovery of digital evidence in a forensic analysis. Exposures to hacking techniques and tools in CS3675—Internet...cryptography, access control, authentication, biometrics, actions to be taken during an attack and case studies of hacking and information warfare. 11...chat, surfing, instant messaging and hacking with powerful access control and filter capabilities. The monitor can operates in a Prevention mode to

Development of synthetic nuclear melt glass for forensic analysis.

PubMed

Molgaard, Joshua J; Auxier, John D; Giminaro, Andrew V; Oldham, C J; Cook, Matthew T; Young, Stephen A; Hall, Howard L

A method for producing synthetic debris similar to the melt glass produced by nuclear surface testing is demonstrated. Melt glass from the first nuclear weapon test (commonly referred to as trinitite) is used as the benchmark for this study. These surrogates can be used to simulate a variety of scenarios and will serve as a tool for developing and validating forensic analysis methods.

Forensic DNA Profiling and Database

PubMed Central

Panneerchelvam, S.; Norazmi, M.N.

2003-01-01

The incredible power of DNA technology as an identification tool had brought a tremendous change in crimnal justice . DNA data base is an information resource for the forensic DNA typing community with details on commonly used short tandem repeat (STR) DNA markers. This article discusses the essential steps in compilation of COmbined DNA Index System (CODIS) on validated polymerase chain amplified STRs and their use in crime detection. PMID:23386793

Nuclear Forensics International Technical Working Group (ITWG): a collaboration of scientists, law enforcement officials, and regulators working to combat nuclear terrorism and proliferation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwantes, Jon M.

Founded in 1996 upon the initiative of the “Group of 8” governments (G8), the Nuclear Forensics International Technical Working Group (ITWG) is an ad hoc organization of official Nuclear Forensics practitioners (scientists, law enforcement, and regulators) that can be called upon to provide technical assistance to the global community in the event of a seizure of nuclear or radiological materials. The ITWG is supported by and is affiliated with nearly 40 countries and international partner organizations including the International Atomic Energy Agency (IAEA), EURATOM, INTERPOL, EUROPOL, and the United Nations Interregional Crime and Justice Research Institute (UNICRI) (Figure 1). Besidesmore » providing a network of nuclear forensics laboratories that are able to assist the global community during a nuclear smuggling event, the ITWG is also committed to the advancement of the science of nuclear forensic analysis, largely through participation in periodic table top and Collaborative Materials Exercises (CMXs). Exercise scenarios use “real world” samples with realistic forensics investigation time constraints and reporting requirements. These exercises are designed to promote best practices in the field and test, evaluate, and improve new technical capabilities, methods and techniques in order to advance the science of nuclear forensics. Past efforts to advance nuclear forensic science have also included scenarios that asked laboratories to adapt conventional forensics methods (e.g. DNA, fingerprints, tool marks, and document comparisons) for collecting and preserving evidence comingled with radioactive materials.« less

The effect of image alterations on identification using palmar flexion creases.

PubMed

Cook, Tom; Sutton, Raul; Buckley, Kevan

2013-11-01

Palmprints are identified using matching of minutia points, which can be time consuming for fingerprint experts and in database searches. This article analyzes the operational characteristics of a palmar flexion crease (PFC) identification software tool, using a dataset of 10 replicates of 100 palms, where the user can label and match palmar line features. Results show that 100 palmprint images modified 10 times each using rotation, translation, and additive noise, mimicking some of the characteristics found in crime scene palmar marks, can be identified with a 99.2% genuine acceptance rate and 0% false acceptance rate when labeled within 3.5 mm of the PFC. Partial palmprint images can also be identified using the same method to filter the dataset prior to traditional matching, while maintaining an effective genuine acceptance rate. The work shows that identification using PFCs can improve palmprint identification through integration with existing systems, and through dedicated palmprint identification applications. © 2013 American Academy of Forensic Sciences.

Integrating forensic information in a crime intelligence database.

PubMed

Rossy, Quentin; Ioset, Sylvain; Dessimoz, Damien; Ribaux, Olivier

2013-07-10

Since 2008, intelligence units of six states of the western part of Switzerland have been sharing a common database for the analysis of high volume crimes. On a daily basis, events reported to the police are analysed, filtered and classified to detect crime repetitions and interpret the crime environment. Several forensic outcomes are integrated in the system such as matches of traces with persons, and links between scenes detected by the comparison of forensic case data. Systematic procedures have been settled to integrate links assumed mainly through DNA profiles, shoemarks patterns and images. A statistical outlook on a retrospective dataset of series from 2009 to 2011 of the database informs for instance on the number of repetition detected or confirmed and increased by forensic case data. Time needed to obtain forensic intelligence in regard with the type of marks treated, is seen as a critical issue. Furthermore, the underlying integration process of forensic intelligence into the crime intelligence database raised several difficulties in regards of the acquisition of data and the models used in the forensic databases. Solutions found and adopted operational procedures are described and discussed. This process form the basis to many other researches aimed at developing forensic intelligence models. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Contrast enhancement of bite mark images using the grayscale mixer in ACR in Photoshop®.

PubMed

Evans, Sam; Noorbhai, Suzanne; Lawson, Zoe; Stacey-Jones, Seren; Carabott, Romina

2013-05-01

Enhanced images may improve bite mark edge definition, assisting forensic analysis. Current contrast enhancement involves color extraction, viewing layered images by channel. A novel technique, producing a single enhanced image using the grayscale mix panel within Adobe Camera Raw®, has been developed and assessed here, allowing adjustments of multiple color channels simultaneously. Stage 1 measured RGB values in 72 versions of a color chart image; eight sliders in Photoshop® were adjusted at 25% intervals, all corresponding colors affected. Stage 2 used a bite mark image, and found only red, orange, and yellow sliders had discernable effects. Stage 3 assessed modality preference between color, grayscale, and enhanced images; on average, the 22 survey participants chose the enhanced image as better defined for nine out of 10 bite marks. The study has shown potential benefits for this new technique. However, further research is needed before use in the analysis of bite marks. © 2013 American Academy of Forensic Sciences.

HRM and SNaPshot as alternative forensic SNP genotyping methods.

PubMed

Mehta, Bhavik; Daniel, Runa; McNevin, Dennis

2017-09-01

Single nucleotide polymorphisms (SNPs) have been widely used in forensics for prediction of identity, biogeographical ancestry (BGA) and externally visible characteristics (EVCs). Single base extension (SBE) assays, most notably SNaPshot® (Thermo Fisher Scientific), are commonly used for forensic SNP genotyping as they can be employed on standard instrumentation in forensic laboratories (e.g. capillary electrophoresis). High resolution melt (HRM) analysis is an alternative method and is a simple, fast, single tube assay for low throughput SNP typing. This study compares HRM and SNaPshot®. HRM produced reproducible and concordant genotypes at 500 pg, however, difficulties were encountered when genotyping SNPs with high GC content in flanking regions and differentiating variants of symmetrical SNPs. SNaPshot® was reproducible at 100 pg and is less dependent on SNP choice. HRM has a shorter processing time in comparison to SNaPshot®, avoids post PCR contamination risk and has potential as a screening tool for many forensic applications.

Effects of state organizational structure and forensic examiner training on pretrial competence assessments.

PubMed

Edens, J F; Poythress, N G; Nicholson, R A; Otto, R K

1999-05-01

States differ widely in their delivery of pretrial forensic evaluation services, in terms of organizational structure and training requirements of forensic examiners. It was hypothesized that defendants adjudicated incompetent to proceed in states using community-based, private-practitioner systems would show less impairment on a competence assessment measure, the MacArthur Competence Assessment Tool-Criminal Adjudication (MacCAT-CA), than defendants adjudicated incompetent in states using traditional, inpatient systems. It also was hypothesized that mean MacCAT-CA scores for incompetent defendants from states requiring forensic training/certification would be lower than for defendants from states lacking such requirements. Results indicated significant differences across the four types of service delivery systems examined. However, planned comparisons revealed no differences between a state using a traditional, inpatient model and a state employing a community-based, private-practitioner model. Analyses examining the effects of mandatory forensic training failed to support the hypothesis that training requirements result in the adoption of higher thresholds for determining incompetence.

New radiological material detection technologies for nuclear forensics: Remote optical imaging and graphene-based sensors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, Richard Karl; Martin, Jeffrey B.; Wiemann, Dora K.

We developed new detector technologies to identify the presence of radioactive materials for nuclear forensics applications. First, we investigated an optical radiation detection technique based on imaging nitrogen fluorescence excited by ionizing radiation. We demonstrated optical detection in air under indoor and outdoor conditions for alpha particles and gamma radiation at distances up to 75 meters. We also contributed to the development of next generation systems and concepts that could enable remote detection at distances greater than 1 km, and originated a concept that could enable daytime operation of the technique. A second area of research was the development ofmore » room-temperature graphene-based sensors for radiation detection and measurement. In this project, we observed tunable optical and charged particle detection, and developed improved devices. With further development, the advancements described in this report could enable new capabilities for nuclear forensics applications.« less

Virtopsy: Touch-free autopsy

PubMed Central

Badam, Raj Kumar; Sownetha, Triekan; Babu, D. B. Gandhi; Waghray, Shefali; Reddy, Lavanya; Garlapati, Komali; Chavva, Sunanda

2017-01-01

The word “autopsy” denotes “to see with own eyes.” Autopsy (postmortem) is a process that includes a thorough examination of a corpse noting everything related to anatomization, surface wounds, histological and culture studies. Virtopsy is a term extracted from two words “virtual” and “autopsy.” It employs imaging methods that are routinely used in clinical medicine such as computed tomography and magnetic resonance imaging in the field of autopsy, to find the reason for death. Virtopsy is a multi-disciplinary technology that combines forensic medicine and pathology, roentgenology, computer graphics, biomechanics, and physics. It is rapidly gaining importance in the field of forensics. This approach has been recently used by forensic odontologists, but yet to make its own mark in the field. This article mainly deals with “virtopsy” where in various articles were web searched, relevant data was selected, extracted, and summarized here. PMID:28584475

Evaluation of coronary stenosis with the aid of quantitative image analysis in histological cross sections.

PubMed

Dulohery, Kate; Papavdi, Asteria; Michalodimitrakis, Manolis; Kranioti, Elena F

2012-11-01

Coronary artery atherosclerosis is a hugely prevalent condition in the Western World and is often encountered during autopsy. Atherosclerotic plaques can cause luminal stenosis: which, if over a significant level (75%), is said to contribute to cause of death. Estimation of stenosis can be macroscopically performed by the forensic pathologists at the time of autopsy or by microscopic examination. This study compares macroscopic estimation with quantitative microscopic image analysis with a particular focus on the assessment of significant stenosis (>75%). A total of 131 individuals were analysed. The sample consists of an atherosclerotic group (n=122) and a control group (n=9). The results of the two methods were significantly different from each other (p=0.001) and the macroscopic method gave a greater percentage stenosis by an average of 3.5%. Also, histological examination of coronary artery stenosis yielded a difference in significant stenosis in 11.5% of cases. The differences were attributed to either histological quantitative image analysis underestimation; gross examination overestimation; or, a combination of both. The underestimation may have come from tissue shrinkage during tissue processing for histological specimen. The overestimation from the macroscopic assessment can be attributed to the lumen shape, to the examiner observer error or to a possible bias to diagnose coronary disease when no other cause of death is apparent. The results indicate that the macroscopic estimation is open to more biases and that histological quantitative image analysis only gives a precise assessment of stenosis ex vivo. Once tissue shrinkage, if any, is accounted for then histological quantitative image analysis will yield a more accurate assessment of in vivo stenosis. It may then be considered a complementary tool for the examination of coronary stenosis. Copyright © 2012 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

A Framework for Reproducible Latent Fingerprint Enhancements.

PubMed

Carasso, Alfred S

2014-01-01

Photoshop processing of latent fingerprints is the preferred methodology among law enforcement forensic experts, but that appproach is not fully reproducible and may lead to questionable enhancements. Alternative, independent, fully reproducible enhancements, using IDL Histogram Equalization and IDL Adaptive Histogram Equalization, can produce better-defined ridge structures, along with considerable background information. Applying a systematic slow motion smoothing procedure to such IDL enhancements, based on the rapid FFT solution of a Lévy stable fractional diffusion equation, can attenuate background detail while preserving ridge information. The resulting smoothed latent print enhancements are comparable to, but distinct from, forensic Photoshop images suitable for input into automated fingerprint identification systems, (AFIS). In addition, this progressive smoothing procedure can be reexamined by displaying the suite of progressively smoother IDL images. That suite can be stored, providing an audit trail that allows monitoring for possible loss of useful information, in transit to the user-selected optimal image. Such independent and fully reproducible enhancements provide a valuable frame of reference that may be helpful in informing, complementing, and possibly validating the forensic Photoshop methodology.

Using spectral information in forensic imaging.

PubMed

Miskelly, Gordon M; Wagner, John H

2005-12-20

Improved detection of forensic evidence by combining narrow band photographic images taken at a range of wavelengths is dependent on the substance of interest having a significantly different spectrum from the underlying substrate. While some natural substances such as blood have distinctive spectral features which are readily distinguished from common colorants, this is not true for visualization agents commonly used in forensic science. We now show that it is possible to select reagents with narrow spectral features that lead to increased visibility using digital cameras and computer image enhancement programs even if their coloration is much less intense to the unaided eye than traditional reagents. The concept is illustrated by visualising latent fingermarks on paper with the zinc complex of Ruhemann's Purple, cyanoacrylate-fumed fingerprints with Eu(tta)(3)(phen), and soil prints with 2,6-bis(benzimidazol-2-yl)-4-[4'-(dimethylamino)phenyl]pyridine [BBIDMAPP]. In each case background correction is performed at one or two wavelengths bracketing the narrow absorption or emission band of these compounds. However, compounds with sharp spectral features would also lead to improved detection using more advanced algorithms such as principal component analysis.

An innovative and shared methodology for event reconstruction using images in forensic science.

PubMed

Milliet, Quentin; Jendly, Manon; Delémont, Olivier

2015-09-01

This study presents an innovative methodology for forensic science image analysis for event reconstruction. The methodology is based on experiences from real cases. It provides real added value to technical guidelines such as standard operating procedures (SOPs) and enriches the community of practices at stake in this field. This bottom-up solution outlines the many facets of analysis and the complexity of the decision-making process. Additionally, the methodology provides a backbone for articulating more detailed and technical procedures and SOPs. It emerged from a grounded theory approach; data from individual and collective interviews with eight Swiss and nine European forensic image analysis experts were collected and interpreted in a continuous, circular and reflexive manner. Throughout the process of conducting interviews and panel discussions, similarities and discrepancies were discussed in detail to provide a comprehensive picture of practices and points of view and to ultimately formalise shared know-how. Our contribution sheds light on the complexity of the choices, actions and interactions along the path of data collection and analysis, enhancing both the researchers' and participants' reflexivity. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

An unusual method of forensic human identification: use of selfie photographs.

PubMed

Miranda, Geraldo Elias; Freitas, Sílvia Guzella de; Maia, Luiza Valéria de Abreu; Melani, Rodolfo Francisco Haltenhoff

2016-06-01

As with other methods of identification, in forensic odontology, antemortem data are compared with postmortem findings. In the absence of dental documentation, photographs of the smile play an important role in this comparison. As yet, there are no reports of the use of the selfie photograph for identification purposes. Owing to advancements in technology, electronic devices, and social networks, this type of photograph has become increasingly common. This paper describes a case in which selfie photographs were used to identify a carbonized body, by using the smile line and image superimposition. This low-cost, rapid, and easy to analyze technique provides highly reliable results. Nevertheless, there are disadvantages, such as the limited number of teeth that are visible in a photograph, low image quality, possibility of morphological changes in the teeth after the antemortem image was taken, and difficulty of making comparisons depending on the orientation of the photo. In forensic odontology, new methods of identification must be sought to accompany technological evolution, particularly when no traditional methods of comparison, such as clinical record charts or radiographs, are available. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

A Framework for Reproducible Latent Fingerprint Enhancements

PubMed Central

Carasso, Alfred S.

2014-01-01

Photoshop processing1 of latent fingerprints is the preferred methodology among law enforcement forensic experts, but that appproach is not fully reproducible and may lead to questionable enhancements. Alternative, independent, fully reproducible enhancements, using IDL Histogram Equalization and IDL Adaptive Histogram Equalization, can produce better-defined ridge structures, along with considerable background information. Applying a systematic slow motion smoothing procedure to such IDL enhancements, based on the rapid FFT solution of a Lévy stable fractional diffusion equation, can attenuate background detail while preserving ridge information. The resulting smoothed latent print enhancements are comparable to, but distinct from, forensic Photoshop images suitable for input into automated fingerprint identification systems, (AFIS). In addition, this progressive smoothing procedure can be reexamined by displaying the suite of progressively smoother IDL images. That suite can be stored, providing an audit trail that allows monitoring for possible loss of useful information, in transit to the user-selected optimal image. Such independent and fully reproducible enhancements provide a valuable frame of reference that may be helpful in informing, complementing, and possibly validating the forensic Photoshop methodology. PMID:26601028

SE33 locus as a reliable genetic marker for forensic DNA analysis systems

PubMed

Bhinder, Munir Ahmad; Zahoor, Muhammad Yasir; Sadia, Haleema; Qasim, Muhammad; Perveen, Rukhsana; Anjum, Ghulam Murtaza; Iqbal, Muhammad; Ullah, Najeeb; Shehzad, Wasim; Tariq, Muhammad; Waryah, Ali Muhammad

2018-06-14

Background/aim: Genetic variation, an authentic tool of individual discrimination, is being used for forensic investigations worldwide. A missing result for even one out of 13-17 markers leads to an inconclusive report. Additional reliable markers are required to compensate such deficiencies. The SE33 locus has high genetic variability in different populations and is being used in forensic investigation systems in some countries. The purpose of the study was to assess the viability of use of the SE33 locus as a supportive marker for forensic DNA profiling. Materials and methods: Amplification of the SE33 locus was performed using the PowerPlex ES Monoplex System SE33 (Promega). After genotyping 204 Pakistani individuals, different genetic and forensic parameters for the SE33 locus were studied. Results: Genotyping of the SE33 locus revealed a total of 43 alleles including 3 novel alleles. Significant values of different forensic and genetic parameters including power of discrimination, power of exclusion, and polymorphism information content were observed. Conclusions: Addition of the SE33 locus in forensic DNA profiling may help to produce conclusive reports where results are inconclusive due to degraded evidence samples. The SE33 locus can confidently be used for Pakistani and neighboring populations having common ancestors from Iran to Central Asia, the Middle East, India and Turkey.

The Structured Assessment of Violence Risk in Adults with Intellectual Disability: A Systematic Review.

PubMed

Hounsome, J; Whittington, R; Brown, A; Greenhill, B; McGuire, J

2018-01-01

While structured professional judgement approaches to assessing and managing the risk of violence have been extensively examined in mental health/forensic settings, the application of the findings to people with an intellectual disability is less extensively researched and reviewed. This review aimed to assess whether risk assessment tools have adequate predictive validity for violence in adults with an intellectual disability. Standard systematic review methodology was used to identify and synthesize appropriate studies. A total of 14 studies were identified as meeting the inclusion criteria. These studies assessed the predictive validity of 18 different risk assessment tools, mainly in forensic settings. All studies concluded that the tools assessed were successful in predicting violence. Studies were generally of a high quality. There is good quality evidence that risk assessment tools are valid for people with intellectual disability who offend but further research is required to validate tools for use with people with intellectual disability who offend. © 2016 John Wiley & Sons Ltd.

Microbiome Tools for Forensic Science.

PubMed

Metcalf, Jessica L; Xu, Zhenjiang Z; Bouslimani, Amina; Dorrestein, Pieter; Carter, David O; Knight, Rob

2017-09-01

Microbes are present at every crime scene and have been used as physical evidence for over a century. Advances in DNA sequencing and computational approaches have led to recent breakthroughs in the use of microbiome approaches for forensic science, particularly in the areas of estimating postmortem intervals (PMIs), locating clandestine graves, and obtaining soil and skin trace evidence. Low-cost, high-throughput technologies allow us to accumulate molecular data quickly and to apply sophisticated machine-learning algorithms, building generalizable predictive models that will be useful in the criminal justice system. In particular, integrating microbiome and metabolomic data has excellent potential to advance microbial forensics. Copyright © 2017. Published by Elsevier Ltd.

Efficacy of Sex Determination from Human Dental Pulp Tissue and its Reliability as a Tool in Forensic Dentistry

PubMed Central

Khanna, Kaveri Surya

2015-01-01

Background: Sex determination is one of the primary steps in forensics. Barr body can be used as a histological method for identification of sex as it is found to be specific to female somatic cells and rare in male cells. To demarcate human dental pulp as an important identification tool of sex in forensic odontology (FO) and to evaluate the time period till which sex can be determined from pulp tissue using three stains H and E, Feulgen, and acridine - orange under fluorescence so as. Materials and Methods: 90 pulp samples (45 males and 45 females) were subjected to Barr body analysis for determination of sex using light and fluorescent microscopy. Results: Barr body was found to be positive for female samples and negative or rare in the male sample (<3%). Conclusion: Barr body from human dental pulp tissue can be used as a successful determinant of sex identification in FO. PMID:26668474

[Analysis of Forensic Characteristics about 23 Family Homicide Cases].

PubMed

Xie, X; Dong, X D

2016-08-01

To provide references for forensic analysis of family homicides cases by analyzing the situations of scene, injuries and individual which were related to the family homicide cases in a county. The data of 23 family homicide cases from 2004 to 2013 were collected. The basic situation of individual involved, the relationship between dead and suspect, the cause of death, the motive, the location, time and tools of the crime and the behavior of the suspect after crime etc. were analyzed. The characteristics of the 23 family homicides cases showed that couple relationship was the most common relationship; passion killing was the most common motive; local materials were mostly used as the tools for committing crimes; most crimes were committed in residences; most time of crime was night. The analysis of family homicide cases should be based on the scene investigation, the examination of the body and combined with the investigation of the situation. Copyright© by the Editorial Department of Journal of Forensic Medicine

The Griffiths Question Map: A Forensic Tool For Expert Witnesses' Assessments of Witnesses and Victims' Statements.

PubMed

Dodier, Olivier; Denault, Vincent

2018-01-01

Expert witnesses are sometimes asked to assess the reliability of young witnesses and victims' statements because of their high susceptibility to memory biases. This technical note aims to highlight the relevance of the Griffiths Question Map (GQM) as a professional forensic tool to improve expert witnesses' assessments of young witnesses and victims' testimonies. To do so, this innovative question type assessment grid was used to proceed to an in-depth analysis of the interview of an alleged 13-year-old victim of a sexual assault and two rapes. Overall, the GQM stressed how the interview was mainly conducted in an inappropriate manner. The results are examined with regard to scientific knowledge on young witnesses and victims' memory. Finally, it is argued that expert witnesses in inquisitorial systems might use the GQM while encountering difficulties to fulfill the legal standards for expert evidence in adversarial systems because of the lack of studies regarding its reliability. © 2017 American Academy of Forensic Sciences.

DNA typing in forensic medicine and in criminal investigations: a current survey.

PubMed

Benecke, M

1997-05-01

Since 1985 DNA typing of biological material has become one of the most powerful tools for personal identification in forensic medicine and in criminal investigations [1-6]. Classical DNA "fingerprinting" is increasingly being replaced by polymerase chain reaction (PCR) based technology which detects very short polymorphic stretches of DNA [7-15]. DNA loci which forensic scientists study do not code for proteins, and they are spread over the whole genome [16, 17]. These loci are neutral, and few provide any information about individuals except for their identity. Minute amounts of biological material are sufficient for DNA typing. Many European countries are beginning to establish databases to store DNA profiles of crime scenes and known offenders. A brief overview is given of past and present DNA typing and the establishment of forensic DNA databases in Europe.

DNA typing in forensic medicine and in criminal investigations: a current survey

NASA Astrophysics Data System (ADS)

Benecke, Mark

Since 1985 DNA typing of biological material has become one of the most powerful tools for personal identification in forensic medicine and in criminal investigations [1-6]. Classical DNA "fingerprinting" is increasingly being replaced by polymerase chain reaction (PCR) based technology which detects very short polymorphic stretches of DNA [7-15]. DNA loci which forensic scientists study do not code for proteins, and they are spread over the whole genome [16, 17]. These loci are neutral, and few provide any information about individuals except for their identity. Minute amounts of biological material are sufficient for DNA typing. Many European countries are beginning to establish databases to store DNA profiles of crime scenes and known offenders. A brief overview is given of past and present DNA typing and the establishment of forensic DNA databases in Europe.

Molecular identification of fungi found on decomposed human bodies in forensic autopsy cases.

PubMed

Schwarz, Patrick; Dannaoui, Eric; Gehl, Axel; Felske-Zech, Heike; Birngruber, Christoph G; Dettmeyer, Reinhard B; Verhoff, Marcel A

2015-07-01

To investigate which fungi can be found during forensic autopsies, a PubMed literature review was done in regard to fungal growth on decomposed human bodies. Unfortunately, the existing data is limited and not all fungi were identified to the species level. We, therefore, collected skin samples with macroscopically visible fungal growth from 23 autopsy cases in Germany and identified the fungi to the species level by molecular methods. The identified species included Aspergillus fumigatus and Candida albicans, which pose an allergenic risk, especially to persons with underlying lung diseases. Because safety standards are lacking, we recommend the use of respiratory protection during exhumations and forensic autopsies, when fungal growth is noted. With regard to the future, a database was set up which could possibly be used as a forensic tool to determine the time of death.

Species identification of adult African blowflies (Diptera: Calliphoridae) of forensic importance.

PubMed

Lutz, Lena; Williams, Kirstin A; Villet, Martin H; Ekanem, Mfon; Szpila, Krzysztof

2018-05-01

Necrophagous blowflies can provide an excellent source of evidence for forensic entomologists and are also relevant to problems in public health, medicine, and animal health. However, access to useful information about these blowflies is constrained by the need to correctly identify the flies, and the poor availability of reliable, accessible identification tools is a serious obstacle to the development of forensic entomology in the majority of African countries. In response to this need, a high-quality key to the adults of all species of forensically relevant blowflies of Africa has been prepared, drawing on high-quality entomological materials and modern focus-stacking photomicroscopy. This new key can be easily applied by investigators inexperienced in the taxonomy of blowflies and is made available through a highly accessible online platform. Problematic diagnostic characters used in previous keys are discussed.

Limitations of diagnostic precision and predictive utility in the individual case: a challenge for forensic practice.

PubMed

Cooke, David J; Michie, Christine

2010-08-01

Knowledge of group tendencies may not assist accurate predictions in the individual case. This has importance for forensic decision making and for the assessment tools routinely applied in forensic evaluations. In this article, we applied Monte Carlo methods to examine diagnostic agreement with different levels of inter-rater agreement given the distributional characteristics of PCL-R scores. Diagnostic agreement and score agreement were substantially less than expected. In addition, we examined the confidence intervals associated with individual predictions of violent recidivism. On the basis of empirical findings, statistical theory, and logic, we conclude that predictions of future offending cannot be achieved in the individual case with any degree of confidence. We discuss the problems identified in relation to the PCL-R in terms of the broader relevance to all instruments used in forensic decision making.

Advances in DNA metabarcoding for food and wildlife forensic species identification.

PubMed

Staats, Martijn; Arulandhu, Alfred J; Gravendeel, Barbara; Holst-Jensen, Arne; Scholtens, Ingrid; Peelen, Tamara; Prins, Theo W; Kok, Esther

2016-07-01

Species identification using DNA barcodes has been widely adopted by forensic scientists as an effective molecular tool for tracking adulterations in food and for analysing samples from alleged wildlife crime incidents. DNA barcoding is an approach that involves sequencing of short DNA sequences from standardized regions and comparison to a reference database as a molecular diagnostic tool in species identification. In recent years, remarkable progress has been made towards developing DNA metabarcoding strategies, which involves next-generation sequencing of DNA barcodes for the simultaneous detection of multiple species in complex samples. Metabarcoding strategies can be used in processed materials containing highly degraded DNA e.g. for the identification of endangered and hazardous species in traditional medicine. This review aims to provide insight into advances of plant and animal DNA barcoding and highlights current practices and recent developments for DNA metabarcoding of food and wildlife forensic samples from a practical point of view. Special emphasis is placed on new developments for identifying species listed in the Convention on International Trade of Endangered Species (CITES) appendices for which reliable methods for species identification may signal and/or prevent illegal trade. Current technological developments and challenges of DNA metabarcoding for forensic scientists will be assessed in the light of stakeholders' needs.

Usefulness and limitations of postmortem computed tomography in forensic analysis of gunshot injuries: Three case reports.

PubMed

Usui, Akihito; Kawasumi, Yusuke; Hosokai, Yoshiyuki; Kozakai, Masataka; Saito, Haruo; Funayama, Masato

2016-01-01

Gunshot injury has always been an important field of investigation in postmortem forensic radiology. The localization and retrieval of the bullet and of potentially important fragments are vital to these cases. Using postmortem multidetector-row computed tomography (MDCT) prior to forensic autopsy, we sought to illustrate the importance of this modality in the noninvasive characterization of gunshot wounds. We obtained and analyzed MDCT images in three cases of gunshot wounds (accidental close-range shotgun shooting, suicidal contact gunshot to the head and accidental long-range buckshot shooting). We discuss the value of postmortem MDCT findings in gunshot wound cases by comparing with forensic autopsy findings in Japan, a developing country with miserably low autopsy rate. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Forensic fictions: science, television production, and modern storytelling.

PubMed

Kirby, David A

2013-03-01

This essay uses interviews with television creators, writers, and producers to examine how media practitioners utilise, negotiate and transform forensic science in the production of televisual stories including the creation of unique visuals, character exploration, narrative progression, plot complication, thematic development, and adding a sense of authenticity. Television as a medium has its own structures and conventions, including adherence to a show's franchise, which put constraints on how stories are told. I demonstrate how television writers find forensic science to be an ideal tool in navigating television's narrative constraints by using forensics to create conflicts, new obstacles, potential solutions, and final solutions in their stories. I show how television writers utilise forensic science to provide the scientific certainty their characters require to catch the criminal, but also how uncertainty is introduced in a story through the interpretation of the forensics by the show's characters. I also argue that televisual storytellers maintain a flexible notion of scientific realism based on the notion of possibility that puts them at odds with scientists who take a more demanding conception of scientific accuracy based on the concept of probability. Copyright © 2013. Published by Elsevier Ltd.

Logical Framework of Forensic Identification: Ability to Resist Fabricated DNA.

PubMed

Wang, Zheng; Zhou, Di; Zhang, Suhua; Bian, Yingnan; Hu, Zhen; Zhu, Ruxin; Lu, Daru; Li, Chengtao

2015-12-01

Over the past 30 years, DNA analysis has revolutionized forensic science and has become the most useful single tool in the multifaceted fight against crime. Today, DNA profiling with sets of highly polymorphic autosomal short tandem repeat markers is widely employed and accepted in the courts due to its high discriminating power and reliability. However, an artificial bloodstain purposefully created using molecular biology techniques succeeded in tricking a leading forensic DNA laboratory. The disturbing possibility that a forensic DNA profile can be faked shocked the general public and the mass media, and generated serious discussion about the credibility of DNA evidence. Herein, we present two exemplary assays based on tissue-specific methylation patterns and cell-specific mRNA expression, respectively. These two assays can be integrated into the DNA analysis pipelines without consumption of additional samples. We show that the two assays can not only distinguish between artificial and genuine samples, but also provide information on tissue origin. The two assays were tested on natural and artificial bloodstains (generated by polymerase chain reaction and whole genome amplification technique) and the results illustrated that the logical framework of forensic identification is still useful for forensic identification with the high credibility.

The utility of postmortem computed tomography selective coronary angiography in parallel with autopsy.

PubMed

Inokuchi, Go; Yajima, Daisuke; Hayakawa, Mutsumi; Motomura, Ayumi; Chiba, Fumiko; Torimitsu, Suguru; Makino, Yohsuke; Iwase, Hirotaro

2013-12-01

Historically, coronary angiography of the isolated heart has played an important role in the detection of stenotic or occlusive lesions that are difficult to identify by autopsy alone. Meanwhile, although the application of multidetector computed tomography (MDCT) to forensic fields has accelerated recently, isolated single organ angiography with MDCT is rarely performed. In this article, we present an evaluation of postmortem selective coronary CT angiography of the isolated heart with MDCT and discuss its utility for autopsy. First, in a preliminary experiment using pig coronary artery, we examined the behavior of water soluble contrast material on postmortem computed tomography angiography (PMCTA) and found that better angiographic images were acquired when the viscosity of the contrast material was increased and CT was performed under conditions of sustained perfusion. Based on these results, we devised a selective coronary angiography procedure using a pressurized bag for drip infusion that can be performed easily, quickly, and at low cost. The angiographic images obtained provided useful supportive evidence of autopsy findings suggestive of ischemic heart disease. With active discussions underway in forensic fields on the proper use of postmortem computed tomography, PMCTA has also naturally attracted attention as it compensates for some of the shortcomings of CT alone. Although PMCTA typically involves whole-body angiography, if we view PMCTA as one of the many useful and supplementary tools available for autopsy, then isolated heart angiography continues to have utility in autopsy today.

Analytical Strategies to Disclose Repeated Consumption of New Psychoactive Substances by Hair Analysis.

PubMed

Rotolo, Maria C; Klein, Julia; Pacifici, Roberta; Busardo, Francesco Paolo; Pichini, Simona; Marchei, Emilia

2017-01-01

New psychoactive substances (NPS) are a heterogenic group of substances with different chemical structures and psychotropic effects. Many pharmacotoxicological laboratories performing drug testing in conventional and nonconventional biological matrices for clinical and forensic purposes do not include screening procedures for NPS in their routine protocols. This is mainly due to the continued entry in the market of newly synthesized products, the low availability of reference standards, in particular of their metabolites, the low availability of immunochemical kits, etc. Moreover, many of the new compounds are very potent, and low doses ingested will lead to low concentrations in biological matrices, especially in hair. Hair analysis has become a powerful tool for detecting chronic drug use and has become a routine technique in forensic toxicology laboratories. The aim of this study was to set up analytical strategies to identify repeated consumption of NPS by hair analysis. Although UHPLC-MS/MS may represent the elective technique in studying NPS, a combination of both GC-MS and UHPLC-MS/MS techniques is useful in creating a complete toxicological image. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Infrared Spectroscopic Imaging of Latent Fingerprints and Associated Forensic Evidence

PubMed Central

Chen, Tsoching; Schultz, Zachary D.; Levin, Ira W.

2011-01-01

Fingerprints reflecting a specific chemical history, such as exposure to explosives, are clearly distinguished from overlapping, and interfering latent fingerprints using infrared spectroscopic imaging techniques and multivariate analysis. PMID:19684917

Portable Hyperspectral Imaging Broadens Sensing Horizons

NASA Technical Reports Server (NTRS)

2007-01-01

Broadband multispectral imaging can be very helpful in showing differences in energy being radiated and is often employed by NASA satellites to monitor temperature and climate changes. In addition, hyperspectral imaging is ideal for advanced laboratory uses, biomedical imaging, forensics, counter-terrorism, skin health, food safety, and Earth imaging. Lextel Intelligence Systems, LLC, of Jackson, Mississippi purchased Photon Industries Inc., a spinoff company of NASA's Stennis Space Center and the Institute for Technology Development dedicated to developing new hyperspectral imaging technologies. Lextel has added new features to and expanded the applicability of the hyperspectral imaging systems. It has made advances in the size, usability, and cost of the instruments. The company now offers a suite of turnkey hyperspectral imaging systems based on the original NASA groundwork. It currently has four lines of hyperspectral imaging products: the EagleEye VNIR 100E, the EagleEye SWIR 100E, the EagleEye SWIR 200E, and the EagleEye UV 100E. These Lextel instruments are used worldwide for a wide variety of applications including medical, military, forensics, and food safety.

Application of Short Tandem Repeat markers in diagnosis of chromosomal aneuploidies and forensic DNA investigation in Pakistan.

PubMed

Chishti, Hafsah Muhammad; Ansar, Muhammad; Ajmal, Muhammad; Hameed, Abdul

2014-09-15

Short Tandem Repeat (STR) genetic markers hold great potential in forensic investigations, molecular diagnostics and molecular genetics research. AmpFlSTR® Identifiler™ PCR amplification kit is a multiplex system for co-amplification of 15 STR markers used worldwide in forensic investigations. This study attempts to assess forensic validity of these STRs in Pakistani population and to investigate its applicability in quick and simultaneous diagnosis and tracing parental source of common chromosomal aneuploidies. Samples from 554 healthy Pakistani individuals from 5 different ethnicities were analyzed for forensic parameters using Identifiler STRs and 74 patients' samples with different aneuploidies were evaluated for diagnostic strengths of these markers. All STRs hold sufficient forensic applicability in Pakistani population with paternity index between 1.5 and 3.5, polymorphic information content from 0.63 to 0.87 and discrimination power ≥0.9 (except TPOX locus). Variation from Hardy-Weinberg equilibrium was observed at some loci reflecting selective breeding and intermarriages trend in Pakistan. Among aneuploidic samples, all trisomies were precisely detectable while aneuploidies involving sex chromosomes or missing chromosomes were not clearly detectable using Identifiler STRs. Parental origin of aneuploidy was traceable in 92.54% patients. The studied STR markers are valuable tools for forensic application in Pakistan and utilizable for quick and simultaneous identification of some common trisomic conditions. Adding more sex chromosome specific STR markers can immensely increase the diagnostic and forensic potential of this system. Copyright © 2014 Elsevier B.V. All rights reserved.

Mummified remains from the Archaeological Museum in Zagreb, Croatia - Reviewing peculiarities and limitations of human and non-human radiological identification and analysis in mummified remains.

PubMed

Petaros, Anja; Janković, Ivor; Cavalli, Fabio; Ivanac, Gordana; Brkljačić, Boris; Čavka, Mislav

2015-10-01

Forensic protocols and medico-legal techniques are increasingly being employed in investigations of museological material. The final findings of such investigations may reveal interesting facts on historical figures, customs and habits, as well as provide meaningful data for forensic use. Herein we present a case review where forensic experts were requested to identify taxonomic affinities, stage of preservation and provide skeletal analysis of mummified non-human archaeological remains, and verify whether two mummified hands are human or not. The manuscript offers a short review on the process and particularities of radiological species identification, the impact of post-mortem changes in the analysis and imaging of mummified remains as well as the macroscopical interpretation of trauma, pathology and authenticity in mummified remains, which can all turn useful when dealing with forensic cases. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Forensic facial approximation: an overview of current methods used at the Victorian Institute of Forensic Medicine/Victoria Police Criminal Identification Squad.

PubMed

Hayes, S; Taylor, R; Paterson, A

2005-12-01

Forensic facial approximation involves building a likeness of the head and face on the skull of an unidentified individual, with the aim that public broadcast of the likeness will trigger recognition in those who knew the person in life. This paper presents an overview of the collaborative practice between Ronn Taylor (Forensic Sculptor to the Victorian Institute of Forensic Medicine) and Detective Sergeant Adrian Paterson (Victoria Police Criminal Identification Squad). This collaboration involves clay modelling to determine an approximation of the person's head shape and feature location, with surface texture and more speculative elements being rendered digitally onto an image of the model. The advantages of this approach are that through clay modelling anatomical contouring is present, digital enhancement resolves some of the problems of visual perception of a representation, such as edge and shape determination, and the approximation can be easily modified as and when new information is received.

[Advantages and Application Prospects of Deep Learning in Image Recognition and Bone Age Assessment].

PubMed

Hu, T H; Wan, L; Liu, T A; Wang, M W; Chen, T; Wang, Y H

2017-12-01

Deep learning and neural network models have been new research directions and hot issues in the fields of machine learning and artificial intelligence in recent years. Deep learning has made a breakthrough in the applications of image and speech recognitions, and also has been extensively used in the fields of face recognition and information retrieval because of its special superiority. Bone X-ray images express different variations in black-white-gray gradations, which have image features of black and white contrasts and level differences. Based on these advantages of deep learning in image recognition, we combine it with the research of bone age assessment to provide basic datum for constructing a forensic automatic system of bone age assessment. This paper reviews the basic concept and network architectures of deep learning, and describes its recent research progress on image recognition in different research fields at home and abroad, and explores its advantages and application prospects in bone age assessment. Copyright© by the Editorial Department of Journal of Forensic Medicine.

A note on digital dental radiography in forensic odontology.

PubMed

Chiam, Sher-Lin

2014-09-01

Digital dental radiography, intraoral and extraoral, is becoming more popular in dental practice. It offers convenience, such as lower exposure to radiation, ease of storing of images, and elimination of chemical processing. However, it also has disadvantages and drawbacks. One of these is the potential for confusion of the orientation of the image. This paper outlines one example of this, namely, the lateral inversion of the image. This source of confusion is partly inherent in the older model of phosphor storage plates (PSPs), as they allow both sides to be exposed without clue to the fact that the image is acquired on the wrong side. The native software allows digital manipulation of the X-ray image, permitting both rotation and inversion. Attempts to orientate the X-ray according to the indicator incorporated on the plate can then sometimes lead to inadvertent lateral inversion of the image. This article discusses the implications of such mistakes in dental digital radiography to forensic odontology and general dental practice.

Audit Log for Forensic Photography

NASA Astrophysics Data System (ADS)

Neville, Timothy; Sorell, Matthew

We propose an architecture for an audit log system for forensic photography, which ensures that the chain of evidence of a photograph taken by a photographer at a crime scene is maintained from the point of image capture to its end application at trial. The requirements for such a system are specified and the results of experiments are presented which demonstrate the feasibility of the proposed approach.

Forensic massively parallel sequencing data analysis tool: Implementation of MyFLq as a standalone web- and Illumina BaseSpace(®)-application.

PubMed

Van Neste, Christophe; Gansemans, Yannick; De Coninck, Dieter; Van Hoofstat, David; Van Criekinge, Wim; Deforce, Dieter; Van Nieuwerburgh, Filip

2015-03-01

Routine use of massively parallel sequencing (MPS) for forensic genomics is on the horizon. The last few years, several algorithms and workflows have been developed to analyze forensic MPS data. However, none have yet been tailored to the needs of the forensic analyst who does not possess an extensive bioinformatics background. We developed our previously published forensic MPS data analysis framework MyFLq (My-Forensic-Loci-queries) into an open-source, user-friendly, web-based application. It can be installed as a standalone web application, or run directly from the Illumina BaseSpace environment. In the former, laboratories can keep their data on-site, while in the latter, data from forensic samples that are sequenced on an Illumina sequencer can be uploaded to Basespace during acquisition, and can subsequently be analyzed using the published MyFLq BaseSpace application. Additional features were implemented such as an interactive graphical report of the results, an interactive threshold selection bar, and an allele length-based analysis in addition to the sequenced-based analysis. Practical use of the application is demonstrated through the analysis of four 16-plex short tandem repeat (STR) samples, showing the complementarity between the sequence- and length-based analysis of the same MPS data. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Forensic individual age estimation with DNA: From initial approaches to methylation tests.

PubMed

Freire-Aradas, A; Phillips, C; Lareu, M V

2017-07-01

Individual age estimation is a key factor in forensic science analysis that can provide very useful information applicable to criminal, legal, and anthropological investigations. Forensic age inference was initially based on morphological inspection or radiography and only later began to adopt molecular approaches. However, a lack of accuracy or technical problems hampered the introduction of these DNA-based methodologies in casework analysis. A turning point occurred when the epigenetic signature of DNA methylation was observed to gradually change during an individual´s lifespan. In the last four years, the number of publications reporting DNA methylation age-correlated changes has gradually risen and the forensic community now has a range of age methylation tests applicable to forensic casework. Most forensic age predictor models have been developed based on blood DNA samples, but additional tissues are now also being explored. This review assesses the most widely adopted genes harboring methylation sites, detection technologies, statistical age-predictive analyses, and potential causes of variation in age estimates. Despite the need for further work to improve predictive accuracy and establishing a broader range of tissues for which tests can analyze the most appropriate methylation sites, several forensic age predictors have now been reported that provide consistency in their prediction accuracies (predictive error of ±4 years); this makes them compelling tools with the potential to contribute key information to help guide criminal investigations. Copyright © 2017 Central Police University.

Cellular phone-based image acquisition and quantitative ratiometric method for detecting cocaine and benzoylecgonine for biological and forensic applications.

PubMed

Cadle, Brian A; Rasmus, Kristin C; Varela, Juan A; Leverich, Leah S; O'Neill, Casey E; Bachtell, Ryan K; Cooper, Donald C

2010-01-01

Here we describe the first report of using low-cost cellular or web-based digital cameras to image and quantify standardized rapid immunoassay strips as a new point-of-care diagnostic and forensics tool with health applications. Quantitative ratiometric pixel density analysis (QRPDA) is an automated method requiring end-users to utilize inexpensive (∼ $1 USD/each) immunotest strips, a commonly available web or mobile phone camera or scanner, and internet or cellular service. A model is described whereby a central computer server and freely available IMAGEJ image analysis software records and analyzes the incoming image data with time-stamp and geo-tag information and performs the QRPDA using custom JAVA based macros (http://www.neurocloud.org). To demonstrate QRPDA we developed a standardized method using rapid immunotest strips directed against cocaine and its major metabolite, benzoylecgonine. Images from standardized samples were acquired using several devices, including a mobile phone camera, web cam, and scanner. We performed image analysis of three brands of commercially available dye-conjugated anti-cocaine/benzoylecgonine (COC/BE) antibody test strips in response to three different series of cocaine concentrations ranging from 0.1 to 300 ng/ml and BE concentrations ranging from 0.003 to 0.1 ng/ml. This data was then used to create standard curves to allow quantification of COC/BE in biological samples. Across all devices, QRPDA quantification of COC and BE proved to be a sensitive, economical, and faster alternative to more costly methods, such as gas chromatography-mass spectrometry, tandem mass spectrometry, or high pressure liquid chromatography. The limit of detection was determined to be between 0.1 and 5 ng/ml. To simulate conditions in the field, QRPDA was found to be robust under a variety of image acquisition and testing conditions that varied temperature, lighting, resolution, magnification and concentrations of biological fluid in a sample. To determine the effectiveness of the QRPDA method for quantifying cocaine in biological samples, mice were injected with a sub-locomotor activating dose of cocaine (5 mg/kg; i.p.) and were found to have detectable levels of COC/BE in their urine (160.6 ng/ml) and blood plasma (8.1 ng/ml) after 15-30 minutes. By comparison rats self-administering cocaine in a 4 hour session obtained a final BE blood plasma level of 910 ng/ml with an average of 62.5 infusions. It is concluded that automated QRPDA is a low-cost, rapid and highly sensitive method for the detection of COC/BE with health, forensics, and bioinformatics application and the potential to be used with other rapid immunotest strips directed at several other targets. Thus, this report serves as a general reference and method describing the use of image analysis of lateral flow rapid test strips.

A study of lip prints and its reliability as a forensic tool

PubMed Central

Verma, Yogendra; Einstein, Arouquiaswamy; Gondhalekar, Rajesh; Verma, Anoop K.; George, Jiji; Chandra, Shaleen; Gupta, Shalini; Samadi, Fahad M.

2015-01-01

Introduction: Lip prints, like fingerprints, are unique to an individual and can be easily recorded. Therefore, we compared direct and indirect lip print patterns in males and females of different age groups, studied the inter- and intraobserver bias in recording the data, and observed any changes in the lip print patterns over a period of time, thereby, assessing the reliability of lip prints as a forensic tool. Materials and Methods: Fifty females and 50 males in the age group of 15 to 35 years were selected for the study. Lips with any deformity or scars were not included. Lip prints were registered by direct and indirect methods and transferred to a preformed registration sheet. Direct method of lip print registration was repeated after a six-month interval. All the recorded data were analyzed statistically. Results: The predominant patterns were vertical and branched. More females showed the branched pattern and males revealed an equal prevalence of vertical and reticular patterns. There was an interobserver agreement, which was 95%, and there was no change in the lip prints over time. Indirect registration of lip prints correlated with direct method prints. Conclusion: Lip prints can be used as a reliable forensic tool, considering the consistency of lip prints over time and the accurate correlation of indirect prints to direct prints. PMID:26668449

Optical 3D surface digitizing in forensic medicine: 3D documentation of skin and bone injuries.

PubMed

Thali, Michael J; Braun, Marcel; Dirnhofer, Richard

2003-11-26

Photography process reduces a three-dimensional (3D) wound to a two-dimensional level. If there is a need for a high-resolution 3D dataset of an object, it needs to be three-dimensionally scanned. No-contact optical 3D digitizing surface scanners can be used as a powerful tool for wound and injury-causing instrument analysis in trauma cases. The 3D skin wound and a bone injury documentation using the optical scanner Advanced TOpometric Sensor (ATOS II, GOM International, Switzerland) will be demonstrated using two illustrative cases. Using this 3D optical digitizing method the wounds (the virtual 3D computer model of the skin and the bone injuries) and the virtual 3D model of the injury-causing tool are graphically documented in 3D in real-life size and shape and can be rotated in the CAD program on the computer screen. In addition, the virtual 3D models of the bone injuries and tool can now be compared in a 3D CAD program against one another in virtual space, to see if there are matching areas. Further steps in forensic medicine will be a full 3D surface documentation of the human body and all the forensic relevant injuries using optical 3D scanners.

Mitochondrial DNA control region sequences from Nairobi (Kenya): inferring phylogenetic parameters for the establishment of a forensic database.

PubMed

Brandstätter, Anita; Peterson, Christine T; Irwin, Jodi A; Mpoke, Solomon; Koech, Davy K; Parson, Walther; Parsons, Thomas J

2004-10-01

Large forensic mtDNA databases which adhere to strict guidelines for generation and maintenance, are not available for many populations outside of the United States and western Europe. We have established a high quality mtDNA control region sequence database for urban Nairobi as both a reference database for forensic investigations, and as a tool to examine the genetic variation of Kenyan sequences in the context of known African variation. The Nairobi sequences exhibited high variation and a low random match probability, indicating utility for forensic testing. Haplogroup identification and frequencies were compared with those reported from other published studies on African, or African-origin populations from Mozambique, Sierra Leone, and the United States, and suggest significant differences in the mtDNA compositions of the various populations. The quality of the sequence data in our study was investigated and supported using phylogenetic measures. Our data demonstrate the diversity and distinctiveness of African populations, and underline the importance of establishing additional forensic mtDNA databases of indigenous African populations.

Combination of Face Regions in Forensic Scenarios.

PubMed

Tome, Pedro; Fierrez, Julian; Vera-Rodriguez, Ruben; Ortega-Garcia, Javier

2015-07-01

This article presents an experimental analysis of the combination of different regions of the human face on various forensic scenarios to generate scientific knowledge useful for the forensic experts. Three scenarios of interest at different distances are considered comparing mugshot and CCTV face images using MORPH and SC face databases. One of the main findings is that inner facial regions combine better in mugshot and close CCTV scenarios and outer facial regions combine better in far CCTV scenarios. This means, that depending of the acquisition distance, the discriminative power of the facial regions change, having in some cases better performance than the full face. This effect can be exploited by considering the fusion of facial regions which results in a very significant improvement of the discriminative performance compared to just using the full face. © 2015 American Academy of Forensic Sciences.

Magnetic resonance imaging of third molars: developing a protocol suitable for forensic age estimation.

PubMed

De Tobel, Jannick; Hillewig, Elke; Bogaert, Stephanie; Deblaere, Karel; Verstraete, Koenraad

2017-03-01

Established dental age estimation methods in sub-adults study the development of third molar root apices on radiographs. In living individuals, however, avoiding ionising radiation is expedient. Studying dental development with magnetic resonance imaging complies with this requirement, adding the advantage of imaging in three dimensions. To elaborate the development of an MRI protocol to visualise all third molars for forensic age estimation, with particular attention to the development of the root apex. Ex vivo scans of porcine jaws and in vivo scans of 10 volunteers aged 17-25 years were performed to select adequate sequences. Studied parameters were T1 vs T2 weighting, ultrashort echo time (UTE), fat suppression, in plane resolution, slice thickness, 3D imaging, signal-to-noise ratio, and acquisition time. A bilateral four-channel flexible surface coil was used. Two observers evaluated the suitability of the images. T2-weighted images were preferred to T1-weighted images. To clearly distinguish root apices in (almost) fully developed third molars an in plane resolution of 0.33 × 0.33 mm 2 was deemed necessary. Taking acquisition time limits into account, only a T2 FSE sequence with slice thickness of 2 mm generated images with sufficient resolution and contrast. UTE, thinner slice T2 FSE and T2 3D FSE sequences could not generate the desired resolution within 6.5 minutes. Three Tesla MRI of the third molars is a feasible technique for forensic age estimation, in which a T2 FSE sequence can provide the desired in plane resolution within a clinically acceptable acquisition time.

Tongue prints: A novel biometric and potential forensic tool.

PubMed

Radhika, T; Jeddy, Nadeem; Nithya, S

2016-01-01

Tongue is a vital internal organ well encased within the oral cavity and protected from the environment. It has unique features which differ from individual to individual and even between identical twins. The color, shape, and surface features are characteristic of every individual, and this serves as a tool for identification. Many modes of biometric systems have come into existence such as fingerprint, iris scan, skin color, signature verification, voice recognition, and face recognition. The search for a new personal identification method secure has led to the use of the lingual impression or the tongue print as a method of biometric authentication. Tongue characteristics exhibit sexual dimorphism thus aiding in the identification of the person. Emerging as a novel biometric tool, tongue prints also hold the promise of a potential forensic tool. This review highlights the uniqueness of tongue prints and its superiority over other biometric identification systems. The various methods of tongue print collection and the classification of tongue features are also elucidated.

Sudden death victims <45 years: Agreement between cause of death established by the forensic physician and autopsy results.

PubMed

Ceelen, Manon; van der Werf, Christian; Hendrix, Anneke; Naujocks, Tatjana; Woonink, Frits; de Vries, Philip; van der Wal, Allard; Das, Kees

2015-08-01

The goal of this study was to ascertain accordance between cause of death established by the forensic physician and autopsy results in young sudden death victims in the Netherlands. Sudden death victims aged 1-45 years examined by forensic physicians operating in the participating regions which also underwent an autopsy between January 2006 and December 2011 were included (n = 70). Cause of death established by the forensic physician based on the external medicolegal examination was compared with autopsy findings using the ICD10-classification. Autopsy findings revealed that the majority of sudden death victims have died from a cardiac disease (n = 51, 73%). Most of the presumed heart disease related cases were confirmed by autopsy (n = 13, 87%). On the contrary, a large number of deaths caused by circulatory diseases were not recognised by the forensic physician (n = 38, 75%). In most of these cases, the forensic physician was forced to report an undetermined cause due to the lack of a solid explanation for death. Cause of death reported by the forensic physician appeared to be in agreement with the autopsy results in 12 cases (17%). Cause of death determination in young sudden death victims is a difficult task for forensic physicians due to the limited tools available during the medicolegal examination. An effort should be made to standardize extensive post-mortem investigation after sudden death in the young. Autopsy can provide valuable information regarding the cause of death, which is of great importance in view of the identification of inheritable diseases among decedents and their families. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

An image-processing methodology for extracting bloodstain pattern features.

PubMed

Arthur, Ravishka M; Humburg, Philomena J; Hoogenboom, Jerry; Baiker, Martin; Taylor, Michael C; de Bruin, Karla G

2017-08-01

There is a growing trend in forensic science to develop methods to make forensic pattern comparison tasks more objective. This has generally involved the application of suitable image-processing methods to provide numerical data for identification or comparison. This paper outlines a unique image-processing methodology that can be utilised by analysts to generate reliable pattern data that will assist them in forming objective conclusions about a pattern. A range of features were defined and extracted from a laboratory-generated impact spatter pattern. These features were based in part on bloodstain properties commonly used in the analysis of spatter bloodstain patterns. The values of these features were consistent with properties reported qualitatively for such patterns. The image-processing method developed shows considerable promise as a way to establish measurable discriminating pattern criteria that are lacking in current bloodstain pattern taxonomies. Copyright © 2017 Elsevier B.V. All rights reserved.

Fluorescence Imaging of Posterior Spiracles from Second and Third Instars of Forensically-important Chrysomya rufifacies (Diptera: Calliphoridae)*

PubMed Central

Flores, Danielle; Miller, Amy L.; Showman, Angelique; Tobita, Caitlyn; Shimoda, Lori M.N.; Sung, Carl; Stokes, Alexander J.; Tomberlin, Jeffrey K.; Carter, David O.; Turner, Helen

2016-01-01

Entomological protocols for aging blow fly (Diptera: Calliphoridae) larvae to estimate the time of colonization (TOC) are commonly used to assist in death investigations. While the methodologies for analysing fly larvae differ, most rely on light microscopy, genetic analysis or, more rarely, electron microscopy. This pilot study sought to improve resolution of larval stage in the forensically-important blow fly Chrysomya rufifacies using high-content fluorescence microscopy and biochemical measures of developmental marker proteins. We established fixation and mounting protocols, defined a set of measurable morphometric criteria and captured developmental transitions of 2nd instar to 3rd instar using both fluorescence microscopy and anti-ecdysone receptor Western blot analysis. The data show that these instars can be distinguished on the basis of robust, non-bleaching, autofluorescence of larval posterior spiracles. High content imaging techniques using confocal microscopy, combined with morphometric and biochemical techniques, may therefore aid forensic entomologists in estimating TOC. PMID:27706817

The identification of living persons on images: A literature review.

PubMed

Gibelli, D; Obertová, Z; Ritz-Timme, S; Gabriel, P; Arent, T; Ratnayake, M; De Angelis, D; Cattaneo, C

2016-03-01

Personal identification in the forensic context commonly concerns unknown decedents. However, recently there has been an increase in cases which require identification of living persons, especially from surveillance systems. These cases bring about a relatively new challenge for forensic anthropologists and pathologists concerning the selection of the most suitable methodological approaches with regard to the limitations of the photographic representation of a given person for individualization and identity. Facial features are instinctively the primary focus for identification approaches. However, other body parts (e.g. hands), and body height and gait (on videos) have been considered in cases of personal identification. This review aims at summarizing the state-of-the-art concerning the identification of the living on images and videos, including a critical evaluation of the advantages and limitations of different methods. Recommendations are given in order to aid forensic practitioners who face cases of identification of living persons. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The HIrisPlex-S system for eye, hair and skin colour prediction from DNA: Introduction and forensic developmental validation.

PubMed

Chaitanya, Lakshmi; Breslin, Krystal; Zuñiga, Sofia; Wirken, Laura; Pośpiech, Ewelina; Kukla-Bartoszek, Magdalena; Sijen, Titia; Knijff, Peter de; Liu, Fan; Branicki, Wojciech; Kayser, Manfred; Walsh, Susan

2018-07-01

Forensic DNA Phenotyping (FDP), i.e. the prediction of human externally visible traits from DNA, has become a fast growing subfield within forensic genetics due to the intelligence information it can provide from DNA traces. FDP outcomes can help focus police investigations in search of unknown perpetrators, who are generally unidentifiable with standard DNA profiling. Therefore, we previously developed and forensically validated the IrisPlex DNA test system for eye colour prediction and the HIrisPlex system for combined eye and hair colour prediction from DNA traces. Here we introduce and forensically validate the HIrisPlex-S DNA test system (S for skin) for the simultaneous prediction of eye, hair, and skin colour from trace DNA. This FDP system consists of two SNaPshot-based multiplex assays targeting a total of 41 SNPs via a novel multiplex assay for 17 skin colour predictive SNPs and the previous HIrisPlex assay for 24 eye and hair colour predictive SNPs, 19 of which also contribute to skin colour prediction. The HIrisPlex-S system further comprises three statistical prediction models, the previously developed IrisPlex model for eye colour prediction based on 6 SNPs, the previous HIrisPlex model for hair colour prediction based on 22 SNPs, and the recently introduced HIrisPlex-S model for skin colour prediction based on 36 SNPs. In the forensic developmental validation testing, the novel 17-plex assay performed in full agreement with the Scientific Working Group on DNA Analysis Methods (SWGDAM) guidelines, as previously shown for the 24-plex assay. Sensitivity testing of the 17-plex assay revealed complete SNP profiles from as little as 63 pg of input DNA, equalling the previously demonstrated sensitivity threshold of the 24-plex HIrisPlex assay. Testing of simulated forensic casework samples such as blood, semen, saliva stains, of inhibited DNA samples, of low quantity touch (trace) DNA samples, and of artificially degraded DNA samples as well as concordance testing, demonstrated the robustness, efficiency, and forensic suitability of the new 17-plex assay, as previously shown for the 24-plex assay. Finally, we provide an update to the publically available HIrisPlex website https://hirisplex.erasmusmc.nl/, now allowing the estimation of individual probabilities for 3 eye, 4 hair, and 5 skin colour categories from HIrisPlex-S input genotypes. The HIrisPlex-S DNA test represents the first forensically validated tool for skin colour prediction, and reflects the first forensically validated tool for simultaneous eye, hair and skin colour prediction from DNA. Copyright © 2018 Elsevier B.V. All rights reserved.

Forensic Examination Using a Nondestructive Evaluation Method for Surface Metrology

NASA Astrophysics Data System (ADS)

Eisenmann, David J.; Chumbley, L. Scott

2009-03-01

The objective of this paper is to describe the use of a new technique of optical profilometry in a nondestructive, non-contact fashion for the comparison of two metallic surfaces, one hard and one soft. When brought in contact with one another, the harder material (i.e. the tool) will impress its surface roughness onto the softer. It is understood that the resulting set of impressions left from a tool tip act in a manner similar to a photographic negative, in that it leaves a reverse, or negative impression on the surface of a plate. If properly inverted and reversed, measurements from the softer material should be identical to the harder indenting object with regard to surface texture and roughness. This assumption is inherent in the area of forensics, where bullets, cartridge cases, and toolmarked surfaces from crime scenes are compared to similar marks made under controlled conditions in the forensic laboratory. This paper will examine the methodology used to compare two surfaces for similarities and dissimilarities, and comment on the applicability of this technique to other studies.

Identification using face regions: application and assessment in forensic scenarios.

PubMed

Tome, Pedro; Fierrez, Julian; Vera-Rodriguez, Ruben; Ramos, Daniel

2013-12-10

This paper reports an exhaustive analysis of the discriminative power of the different regions of the human face on various forensic scenarios. In practice, when forensic examiners compare two face images, they focus their attention not only on the overall similarity of the two faces. They carry out an exhaustive morphological comparison region by region (e.g., nose, mouth, eyebrows, etc.). In this scenario it is very important to know based on scientific methods to what extent each facial region can help in identifying a person. This knowledge obtained using quantitative and statical methods on given populations can then be used by the examiner to support or tune his observations. In order to generate such scientific knowledge useful for the expert, several methodologies are compared, such as manual and automatic facial landmarks extraction, different facial regions extractors, and various distances between the subject and the acquisition camera. Also, three scenarios of interest for forensics are considered comparing mugshot and Closed-Circuit TeleVision (CCTV) face images using MORPH and SCface databases. One of the findings is that depending of the acquisition distances, the discriminative power of the facial regions change, having in some cases better performance than the full face. Crown Copyright © 2013. Published by Elsevier Ireland Ltd. All rights reserved.

Direct analysis in real time-Mass spectrometry (DART-MS) in forensic and security applications.

PubMed

Pavlovich, Matthew J; Musselman, Brian; Hall, Adam B

2018-03-01

Over the last decade, direct analysis in real time (DART) has emerged as a viable method for fast, easy, and reliable "ambient ionization" for forensic analysis. The ability of DART to generate ions from chemicals that might be present at the scene of a criminal activity, whether they are in the gas, liquid, or solid phase, with limited sample preparation has made the technology a useful analytical tool in numerous forensic applications. This review paper summarizes many of those applications, ranging from the analysis of trace evidence to security applications, with a focus on providing the forensic scientist with a resource for developing their own applications. The most common uses for DART in forensics are in studying seized drugs, drugs of abuse and their metabolites, bulk and detonated explosives, toxic chemicals, chemical warfare agents, inks and dyes, and commercial plant and animal products that have been adulterated for economic gain. This review is meant to complement recent reviews that have described the fundamentals of the ionization mechanism and the general use of DART. We describe a wide range of forensic applications beyond the field of analyzing drugs of abuse, which dominates the literature, including common experimental and data analysis methods. © 2016 Wiley Periodicals, Inc. Mass Spec Rev 37:171-187, 2018. © 2016 Wiley Periodicals, Inc.

Photothermal and infrared thermography characterizations of thermal diffusion in hydroxyapatite materials

NASA Astrophysics Data System (ADS)

Bante-Guerra, J.; Conde-Contreras, M.; Trujillo, S.; Martinez-Torres, P.; Cruz-Jimenez, B.; Quintana, P.; Alvarado-Gil, J. J.

2009-02-01

Non destructive analysis of hydroxyapatite materials is an active research area mainly in the study of dental pieces and bones due to the importance these pieces have in medicine, archeology, dentistry, forensics and anthropology. Infrared thermography and photothermal techniques constitute highly valuable tools in those cases. In this work the quantitative analysis of thermal diffusion in bones is presented. The results obtained using thermographic images are compared with the ones obtained from the photothermal radiometry. Special emphasis is done in the analysis of samples with previous thermal damage. Our results show that the treatments induce changes in the physical properties of the samples. These results could be useful in the identification of the agents that induced modifications of unknown origin in hydroxyapatite structures.

Digital Forensics Using Local Signal Statistics

ERIC Educational Resources Information Center

Pan, Xunyu

2011-01-01

With the rapid growth of the Internet and the popularity of digital imaging devices, digital imagery has become our major information source. Meanwhile, the development of digital manipulation techniques employed by most image editing software brings new challenges to the credibility of photographic images as the definite records of events. We…

Stable-isotope fingerprints of biological agents as forensic tools.

PubMed

Horita, Juske; Vass, Arpad A

2003-01-01

Naturally occurring stable isotopes of light elements in chemical and biological agents may possess unique "stable-isotope fingerprints" depending on their sources and manufacturing processes. To test this hypothesis, two strains of bacteria (Bacillus globigii and Erwinia agglomerans) were grown under controlled laboratory conditions. We observed that cultured bacteria cells faithfully inherited the isotopic composition (hydrogen, carbon, and nitrogen) of media waters and substrates in predictable manners in terms of bacterial metabolism and that even bacterial cells of the same strain, which grew in media water and substrates of different isotopic compositions, have readily distinguishable isotopic signatures. These "stable-isotopic fingerprints" of chemical and biological agents can be used as forensic tools in the event of biochemical terrorist attacks.

Comparing the Scoring of Human Decomposition from Digital Images to Scoring Using On-site Observations.

PubMed

Dabbs, Gretchen R; Bytheway, Joan A; Connor, Melissa

2017-09-01

When in forensic casework or empirical research in-person assessment of human decomposition is not possible, the sensible substitution is color photographic images. To date, no research has confirmed the utility of color photographic images as a proxy for in situ observation of the level of decomposition. Sixteen observers scored photographs of 13 human cadavers in varying decomposition stages (PMI 2-186 days) using the Total Body Score system (total n = 929 observations). The on-site TBS was compared with recorded observations from digital color images using a paired samples t-test. The average difference between on-site and photographic observations was -0.20 (t = -1.679, df = 928, p = 0.094). Individually, only two observers, both students with <1 year of experience, demonstrated TBS statistically significantly different than the on-site value, suggesting that with experience, observations of human decomposition based on digital images can be substituted for assessments based on observation of the corpse in situ, when necessary. © 2017 American Academy of Forensic Sciences.

Real-time color image processing for forensic fiber investigations

NASA Astrophysics Data System (ADS)

Paulsson, Nils

1995-09-01

This paper describes a system for automatic fiber debris detection based on color identification. The properties of the system are fast analysis and high selectivity, a necessity when analyzing forensic fiber samples. An ordinary investigation separates the material into well above 100,000 video images to analyze. The system is based on standard techniques such as CCD-camera, motorized sample table, and IBM-compatible PC/AT with add-on-boards for video frame digitalization and stepping motor control as the main parts. It is possible to operate the instrument at full video rate (25 image/s) with aid of the HSI-color system (hue- saturation-intensity) and software optimization. High selectivity is achieved by separating the analysis into several steps. The first step is fast direct color identification of objects in the analyzed video images and the second step analyzes detected objects with a more complex and time consuming stage of the investigation to identify single fiber fragments for subsequent analysis with more selective techniques.

The MacArthur Competence Assessment Tool-Criminal Adjudication: Factor structure, interrater reliability, and association with clinician opinion of competence in a forensic inpatient sample.

PubMed

Wood, Mary E; Anderson, Jaime L; Glassmire, David M

2017-06-01

Adjudicative competence is the most frequently referred evaluation in the forensic context, and it is because of this that periodic evaluation of competence assessment instruments is imperative. Among those instruments, the MacArthur Competence Assessment Tool-Criminal Adjudication (MacCAT-CA) has demonstrated adequate psychometric properties suggesting its utility in informing the forensic inquiry. The purpose of the current study was to further investigate the psychometric properties and ultimate utility of subscale scores using archival data from a sample of 103 male and female forensic patients who were hospitalized for competence restoration treatment. Results of the present study suggested adequate internal consistency and good model fit for the factor structure. Interrater reliability was evaluated by comparing the absolute agreement of scores derived from 2 independent research assistants for each of the subscales; 2 of the 3 subscales fell within the acceptable range given established interpretative benchmarks for forensic assessment. Of particular interest was that the Appreciation subscale, while heralding the lowest intraclass correlation coefficient, explained the largest proportion of variance in clinician opinion relative to the other 2 subscales. In other words, the most subjective subscale (as evidenced by the lowest intraclass correlation), explained the largest proportion of variance in ultimate opinion. The authors argue that, although these results are an important consideration in these assessments, they are neither surprising nor entirely problematic when considering the case-specific nature of the inquiries on the subscale, as well as the subjectivity of scoring criteria for each of the Appreciation items. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Predictive accuracy of the Historical-Clinical-Risk Management-20 for violence in forensic psychiatric wards in Japan.

PubMed

Arai, Kaoru; Takano, Ayumi; Nagata, Takako; Hirabayashi, Naotsugu

2017-12-01

Most structured assessment tools for assessing risk of violence were developed in Western countries, and evidence for their effectiveness is not well established in Asian countries. Our aim was to examine the predictive accuracy of the Historical-Clinical-Risk Management-20 (HCR-20) for violence in forensic mental health inpatient units in Japan. A retrospective record study was conducted with a complete 2008-2013 cohort of forensic psychiatric inpatients at the National Center Hospital of Neurology and Psychiatry, Tokyo. Forensic psychiatrists were trained in use of the HCR-20 and asked to complete it as part of their admission assessment. The completed forms were then retained by the researchers and not used in clinical practice; for this, clinicians relied solely on national legally required guidelines. Violent outcomes were determined at 3 and 6 months after the assessment. Receiver operating characteristic analysis was used to calculate the predictive accuracy of the HCR-20 for violence. Area under the curve analyses suggested that the HCR-20 total score is a good predictor of violence in this cohort, with the clinical and risk sub-scales showing good predictive accuracy, but the historical sub-scale not doing so. Area under the curve figures were similar at 3 months and at 6 months. Our results are consistent with studies previously conducted in Western countries. This suggests that the HCR-20 is an effective tool for supporting risk of violence assessment in Japanese forensic psychiatric wards. Its widespread use in clinical practice could enhance safety and would certainly promote transparency in risk-related decision-making. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Genetics and attribution issues that confront the microbial forensics field.

PubMed

Budowle, Bruce

2004-12-02

The commission of an act of bioterrorism or biocrime is a real concern for law enforcement and society. Efforts are underway to develop a strong microbial forensic program to assist in identifying perpetrators of acts of bioterrorism and biocrimes, as well as serve as a deterrent for those who might commit such illicit acts. Genetic analyses of microbial organisms will likely be a powerful tool for attribution of criminal acts. There are some similarities to forensic human DNA analysis practices, such as: molecular biology technology, use of population databases, qualitative conclusions of test results, and the application of QA/QC practices. Differences include: database size and composition, statistical interpretation methods, and confidence/uncertainty in the outcome of an interpretation.

The forensic holodeck: an immersive display for forensic crime scene reconstructions.

PubMed

Ebert, Lars C; Nguyen, Tuan T; Breitbeck, Robert; Braun, Marcel; Thali, Michael J; Ross, Steffen

2014-12-01

In forensic investigations, crime scene reconstructions are created based on a variety of three-dimensional image modalities. Although the data gathered are three-dimensional, their presentation on computer screens and paper is two-dimensional, which incurs a loss of information. By applying immersive virtual reality (VR) techniques, we propose a system that allows a crime scene to be viewed as if the investigator were present at the scene. We used a low-cost VR headset originally developed for computer gaming in our system. The headset offers a large viewing volume and tracks the user's head orientation in real-time, and an optical tracker is used for positional information. In addition, we created a crime scene reconstruction to demonstrate the system. In this article, we present a low-cost system that allows immersive, three-dimensional and interactive visualization of forensic incident scene reconstructions.

Application of statistical shape analysis for the estimation of bone and forensic age using the shapes of the 2nd, 3rd, and 4th cervical vertebrae in a young Japanese population.

PubMed

Rhee, Chang-Hoon; Shin, Sang Min; Choi, Yong-Seok; Yamaguchi, Tetsutaro; Maki, Koutaro; Kim, Yong-Il; Kim, Seong-Sik; Park, Soo-Byung; Son, Woo-Sung

2015-12-01

From computed tomographic images, the dentocentral synchondrosis can be identified in the second cervical vertebra. This can demarcate the border between the odontoid process and the body of the 2nd cervical vertebra and serve as a good model for the prediction of bone and forensic age. Nevertheless, until now, there has been no application of the 2nd cervical vertebra based on the dentocentral synchondrosis. In this study, statistical shape analysis was used to build bone and forensic age estimation regression models. Following the principles of statistical shape analysis and principal components analysis, we used cone-beam computed tomography (CBCT) to evaluate a Japanese population (35 males and 45 females, from 5 to 19 years old). The narrowest prediction intervals among the multivariate regression models were 19.63 for bone age and 2.99 for forensic age. There was no significant difference between form space and shape space in the bone and forensic age estimation models. However, for gender comparison, the bone and forensic age estimation models for males had the higher explanatory power. This study derived an improved objective and quantitative method for bone and forensic age estimation based on only the 2nd, 3rd and 4th cervical vertebral shapes. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Analysis of dental injuries with clinical implications: A forensic case report.

PubMed

Tan, Si-Lei; Peng, Shu-Ya; Wan, Lei; Chen, Jie-Min; Xia, Wen-Tao

2018-01-01

Dental injuries, especially of the incisors, caused by punches in violent criminal attacks could be seen in daily forensic casework involving the identification of injuries to a living body. Sometimes, when there is neither circumstantial evidence nor information about the surrounding circumstances, it is difficult to discern the cause of these injuries and the manner in which they were inflicted. As an example of clinical forensic medicine, we present the case of a 58-year-old woman whose teeth were injured when fighting with her son-in-law over household affairs with no witnesses present. The two parties had conflicting stories about the cause of the woman's injury. The woman claimed that her teeth were lost while she was being beaten by her son-in-law, and the man argued that the damage to his mother-in-law's teeth was self-inflicted when she bit his fingers. The police attending the crime called for a forensic examination. Forensic practitioners analysed the mechanism of the tooth loss using multi-slice spiral computed tomography (MSCT) and imaging reconstruction technology. Local alveolar bone (medial alveolar) fracture and a small area of alveolar bone loss were found on MSCT. Thus, forensic medical experts speculated that the woman's lower central and lateral incisors were lost as a result of a violent attack and were not self-inflicted. Finally, forensic practitioners helped police in avoiding a miscarriage of justice and wrongful conviction.

Passive detection of copy-move forgery in digital images: state-of-the-art.

PubMed

Al-Qershi, Osamah M; Khoo, Bee Ee

2013-09-10

Currently, digital images and videos have high importance because they have become the main carriers of information. However, the relative ease of tampering with images and videos makes their authenticity untrustful. Digital image forensics addresses the problem of the authentication of images or their origins. One main branch of image forensics is passive image forgery detection. Images could be forged using different techniques, and the most common forgery is the copy-move, in which a region of an image is duplicated and placed elsewhere in the same image. Active techniques, such as watermarking, have been proposed to solve the image authenticity problem, but those techniques have limitations because they require human intervention or specially equipped cameras. To overcome these limitations, several passive authentication methods have been proposed. In contrast to active methods, passive methods do not require any previous information about the image, and they take advantage of specific detectable changes that forgeries can bring into the image. In this paper, we describe the current state-of-the-art of passive copy-move forgery detection methods. The key current issues in developing a robust copy-move forgery detector are then identified, and the trends of tackling those issues are addressed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Evaluation of image quality of digital photo documentation of female genital injuries following sexual assault.

PubMed

Ernst, E J; Speck, Patricia M; Fitzpatrick, Joyce J

2011-12-01

With the patient's consent, physical injuries sustained in a sexual assault are evaluated and treated by the sexual assault nurse examiner (SANE) and documented on preprinted traumagrams and with photographs. Digital imaging is now available to the SANE for documentation of sexual assault injuries, but studies of the image quality of forensic digital imaging of female genital injuries after sexual assault were not found in the literature. The Photo Documentation Image Quality Scoring System (PDIQSS) was developed to rate the image quality of digital photo documentation of female genital injuries after sexual assault. Three expert observers performed evaluations on 30 separate images at two points in time. An image quality score, the sum of eight integral technical and anatomical attributes on the PDIQSS, was obtained for each image. Individual image quality ratings, defined by rating image quality for each of the data, were also determined. The results demonstrated a high level of image quality and agreement when measured in all dimensions. For the SANE in clinical practice, the results of this study indicate that a high degree of agreement exists between expert observers when using the PDIQSS to rate image quality of individual digital photographs of female genital injuries after sexual assault. © 2011 International Association of Forensic Nurses.

Likelihood ratio data to report the validation of a forensic fingerprint evaluation method.

PubMed

Ramos, Daniel; Haraksim, Rudolf; Meuwly, Didier

2017-02-01

Data to which the authors refer to throughout this article are likelihood ratios (LR) computed from the comparison of 5-12 minutiae fingermarks with fingerprints. These LRs data are used for the validation of a likelihood ratio (LR) method in forensic evidence evaluation. These data present a necessary asset for conducting validation experiments when validating LR methods used in forensic evidence evaluation and set up validation reports. These data can be also used as a baseline for comparing the fingermark evidence in the same minutiae configuration as presented in (D. Meuwly, D. Ramos, R. Haraksim,) [1], although the reader should keep in mind that different feature extraction algorithms and different AFIS systems used may produce different LRs values. Moreover, these data may serve as a reproducibility exercise, in order to train the generation of validation reports of forensic methods, according to [1]. Alongside the data, a justification and motivation for the use of methods is given. These methods calculate LRs from the fingerprint/mark data and are subject to a validation procedure. The choice of using real forensic fingerprint in the validation and simulated data in the development is described and justified. Validation criteria are set for the purpose of validation of the LR methods, which are used to calculate the LR values from the data and the validation report. For privacy and data protection reasons, the original fingerprint/mark images cannot be shared. But these images do not constitute the core data for the validation, contrarily to the LRs that are shared.

REMOTE SENSING TOOLS ASSIST IN ENVIRONMENTAL FORENSICS PART II - DIGITAL TOOLS

EPA Science Inventory

This is part two of a two-part discussion, in which we will provide an overview of the use of GIS and GPS in environmental analysis and enforcement.

GIS describes a system that manages, analyzes and displays geographic information. Environmental applications include anal...

Prevention of DNA contamination during forensic medical examinations in a clinical forensic medical service: A best practice implementation project.

PubMed

Lutz, Tasha

2015-01-01

Contamination of forensic specimens can have significant and detrimental effects on cases presented in court. In 2010 a wrongful conviction in Australia resulted in an inquiry with 25 recommendations to minimize the risk of DNA contamination of forensic specimens. DNA decontamination practices in a clinical forensic medical service currently attempt to comply with these recommendations. Evaluation of these practices has not been undertaken. The aim of this project was to audit the current DNA decontamination practices of forensic medical and nursing examiners in the forensic medical examination process and implement changes based on the audit findings. A re-audit following implementation would be undertaken to identify change and inform further research. The Joanna Briggs Institute's Practical Application of Clinical Evidence System and Getting Research into Practice were used as the audit tool in this project. A baseline audit was conducted; analysis of this audit process was then undertaken. Following education and awareness training targeted at clinicians, a re-audit was completed. There were a total of 24 audit criteria; the baseline audit reflected 20 of these criteria had 100% compliance. The remaining 4 audit criteria demonstrated compliance between 65% and 90%. Education and awareness training resulted in improved compliance in 2 of the 4 audit criteria, with the remaining 2 having unchanged compliance. The findings demonstrated that education and raising awareness can improve clinical practice; however there are also external factors outside the control of the clinicians that influence compliance with best practice.

[Non-medical applications for brain MRI: Ethical considerations].

PubMed

Sarrazin, S; Fagot-Largeault, A; Leboyer, M; Houenou, J

2015-04-01

The recent neuroimaging techniques offer the possibility to better understand complex cognitive processes that are involved in mental disorders and thus have become cornerstone tools for research in psychiatry. The performances of functional magnetic resonance imaging are not limited to medical research and are used in non-medical fields. These recent applications represent new challenges for bioethics. In this article we aim at discussing the new ethical issues raised by the applications of the latest neuroimaging technologies to non-medical fields. We included a selection of peer-reviewed English medical articles after a search on NCBI Pubmed database and Google scholar from 2000 to 2013. We screened bibliographical tables for supplementary references. Websites of governmental French institutions implicated in ethical questions were also screened for governmental reports. Findings of brain areas supporting emotional responses and regulation have been used for marketing research, also called neuromarketing. The discovery of different brain activation patterns in antisocial disorder has led to changes in forensic psychiatry with the use of imaging techniques with unproven validity. Automated classification algorithms and multivariate statistical analyses of brain images have been applied to brain-reading techniques, aiming at predicting unconscious neural processes in humans. We finally report the current position of the French legislation recently revised and discuss the technical limits of such techniques. In the near future, brain imaging could find clinical applications in psychiatry as diagnostic or predictive tools. However, the latest advances in brain imaging are also used in non-scientific fields raising key ethical questions. Involvement of neuroscientists, psychiatrists, physicians but also of citizens in neuroethics discussions is crucial to challenge the risk of unregulated uses of brain imaging. Copyright © 2014 L’Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

Comparing Two Tools for Mobile-Device Forensics

DTIC Science & Technology

2017-09-01

baseline standard. 2.4 Mobile Operating Systems "A mobile operating system is an operating system that is specifically designed to run on mobile devices... run on mobile devices" [7]. There are many different types of mobile operating systems and they are constantly changing, which means an operating...to this is that the security features make forensic analysis more difficult [11]. 2.4.2 iPhone "The iPhone runs an operating system called iOS. It is a

The first report of Telomerina flavipes (Meigen, 1830) (Diptera, Sphaeroceridae) in a forensic case, with redescription of its pupa.

PubMed

Arnaldos, María-Isabel; Ubero-Pascal, Nicolás; García, Rafael; Carles-Tolrá, Miguel; Presa, Juan-José; García, María-Dolores

2014-09-01

This paper presents a forensic investigation that took place in the city of Murcia (SE Spain) and shows how the entomological specimens collected at the scene were extremely helpful for estimating the minimum post-mortem interval (PMImin). The occurrence of Telomerina flavipes (Meigen, 1830) (Diptera: Sphaeroceridae) is reported here for the first time in a forensic case. Additionally, the importance of other entomological evidence in this case is discussed. The first known images of the puparium are provided, as well as its redescription and that of the cephalopharyngeal skeleton recovered from the puparium. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Utility of Postmortem Autopsy via Whole-Body Imaging: Initial Observations Comparing MDCT and 3.0T MRI Findings with Autopsy Findings

PubMed Central

Cha, Jang Gyu; Kim, Dong Hun; Kim, Dae Ho; Paik, Sang Hyun; Park, Jai Soung; Park, Seong Jin; Lee, Hae Kyung; Hong, Hyun Sook; Choi, Duek Lin; Chung, Nak Eun; Lee, Bong Woo; Seo, Joong Seok

2010-01-01

Objective We prospectively compared whole-body multidetector computed tomography (MDCT) and 3.0T magnetic resonance (MR) images with autopsy findings. Materials and Methods Five cadavers were subjected to whole-body, 16-channel MDCT and 3.0T MR imaging within two hours before an autopsy. A radiologist classified the MDCT and 3.0T MRI findings into major and minor findings, which were compared with autopsy findings. Results Most of the imaging findings, pertaining to head and neck, heart and vascular, chest, abdomen, spine, and musculoskeletal lesions, corresponded to autopsy findings. The causes of death that were determined on the bases of MDCT and 3.0T MRI findings were consistent with the autopsy findings in four of five cases. CT was useful in diagnosing fatal hemorrhage and pneumothorax, as well as determining the shapes and characteristics of the fractures and the direction of external force. MRI was effective in evaluating and tracing the route of a metallic object, soft tissue lesions, chronicity of hemorrhage, and bone bruises. Conclusion A postmortem MDCT combined with MRI is a potentially powerful tool, providing noninvasive and objective measurements for forensic investigations. PMID:20592923

Just truth? Carefully applying history, philosophy and sociology of science to the forensic use of CCTV images.

PubMed

Edmond, Gary

2013-03-01

Using as a case study the forensic comparison of images for purposes of identification, this essay considers how the history, philosophy and sociology of science might help courts to improve their responses to scientific and technical forms of expert opinion evidence in ways that are more consistent with legal system goals and values. It places an emphasis on the need for more sophisticated models of science and expertise that are capable of helping judges to identify sufficiently reliable types of expert evidence and to reflexively incorporate the weakness of trial safeguards and personnel into their admissibility decision making. Copyright © 2013. Published by Elsevier Ltd.

Usage of cornea and sclera back reflected images captured in security cameras for forensic and card games applications

NASA Astrophysics Data System (ADS)

Zalevsky, Zeev; Ilovitsh, Asaf; Beiderman, Yevgeny

2013-10-01

We present an approach allowing seeing objects that are hidden and that are not positioned in direct line of sight with security inspection cameras. The approach is based on inspecting the back reflections obtained from the cornea and the sclera of the eyes of people attending the inspected scene and which are positioned in front of the hidden objects we aim to image after performing proper calibration with point light source (e.g. a LED). The scene can be a forensic scene or for instance a casino in which the application is to see the cards of poker players seating in front of you.

An Automatic Image-Based Modelling Method Applied to Forensic Infography

PubMed Central

Zancajo-Blazquez, Sandra; Gonzalez-Aguilera, Diego; Gonzalez-Jorge, Higinio; Hernandez-Lopez, David

2015-01-01

This paper presents a new method based on 3D reconstruction from images that demonstrates the utility and integration of close-range photogrammetry and computer vision as an efficient alternative to modelling complex objects and scenarios of forensic infography. The results obtained confirm the validity of the method compared to other existing alternatives as it guarantees the following: (i) flexibility, permitting work with any type of camera (calibrated and non-calibrated, smartphone or tablet) and image (visible, infrared, thermal, etc.); (ii) automation, allowing the reconstruction of three-dimensional scenarios in the absence of manual intervention, and (iii) high quality results, sometimes providing higher resolution than modern laser scanning systems. As a result, each ocular inspection of a crime scene with any camera performed by the scientific police can be transformed into a scaled 3d model. PMID:25793628

Polarization-based and specular-reflection-based noncontact latent fingerprint imaging and lifting

NASA Astrophysics Data System (ADS)

Lin, Shih-Schön; Yemelyanov, Konstantin M.; Pugh, Edward N., Jr.; Engheta, Nader

2006-09-01

In forensic science the finger marks left unintentionally by people at a crime scene are referred to as latent fingerprints. Most existing techniques to detect and lift latent fingerprints require application of a certain material directly onto the exhibit. The chemical and physical processing applied to the fingerprint potentially degrades or prevents further forensic testing on the same evidence sample. Many existing methods also have deleterious side effects. We introduce a method to detect and extract latent fingerprint images without applying any powder or chemicals on the object. Our method is based on the optical phenomena of polarization and specular reflection together with the physiology of fingerprint formation. The recovered image quality is comparable to existing methods. In some cases, such as the sticky side of tape, our method shows unique advantages.

Determining approximate age of digital images using sensor defects

NASA Astrophysics Data System (ADS)

Fridrich, Jessica; Goljan, Miroslav

2011-02-01

The goal of temporal forensics is to establish temporal relationship among two or more pieces of evidence. In this paper, we focus on digital images and describe a method using which an analyst can estimate the acquisition time of an image given a set of other images from the same camera whose time ordering is known. This is achieved by first estimating the parameters of pixel defects, including their onsets, and then detecting their presence in the image under investigation. Both estimators are constructed using the maximum-likelihood principle. The accuracy and limitations of this approach are illustrated on experiments with three cameras. Forensic and law-enforcement analysts are expected to benefit from this technique in situations when the temporal data stored in the EXIF header is lost due to processing or editing images off-line or when the header cannot be trusted. Reliable methods for establishing temporal order between individual pieces of evidence can help reveal deception attempts of an adversary or a criminal. The causal relationship may also provide information about the whereabouts of the photographer.

Mitochondria in anthropology and forensic medicine.

PubMed

Grzybowski, Tomasz; Rogalla, Urszula

2012-01-01

Mitochondria's role in crucial metabolic pathways is probably the first answer which comes to our minds for the question: what do these tiny organelles serve for? However, specific features of their DNA made them extremely useful also in the field of anthropology and forensics. MtDNA analyses became a milestone in the complex task of unraveling earliest human migrations. Evidence provided by these experiments left no doubts on modern humans origins pointing to Africa being our cradle. It also contributed to interpretation of putative ways of our dispersal around Asia and Americas thousands years ago. On the other hand, analysis of mtDNA is well established and valuable tool in forensic genetics. When other definitely more popular markers give no answer on identity, it is the time to employ information carried by mitochondria. This chapter summarizes not only current reports on the role of mitochondria in forensics and reconstruction of modern humans phylogeny, but also calls one's attention to a broad range of difficulties and constraints associated with mtDNA analyses.

A silicon sol-gel approach to the development of forensic blood substitutes: Design Considerations for Research and Training

NASA Astrophysics Data System (ADS)

Stotesbury, Theresa E.

The research and development of synthetic blood substitutes is a reported need within the forensic community. This work contributes to the growing body of knowledge in bloodstain pattern analysis by offering a materials science approach to designing, producing and testing synthetic forensic blood substitutes. A key deliverable from this research is the creation of a robust silicon-based material using the solution-gelation technique that has been validated for controlled passive drip and spatter simulation. The work investigates the physical properties (viscosity, surface tension and density) of forensic blood substitute formulations and describes the similarity in the spreading dynamics of the optimized material to whole human blood. It then explores how blood and other fluids behave in impact simulation using high-speed video analysis and supports the use of the optimized material for spatter simulation. Finally, the work highlights the practical value of the material as an educational tool for both basic and advanced bloodstain experimentation and training.

Analysis of Forensic Autopsy in 120 Cases of Medical Disputes Among Different Levels of Institutional Settings.

PubMed

Yu, Lin-Sheng; Ye, Guang-Hua; Fan, Yan-Yan; Li, Xing-Biao; Feng, Xiang-Ping; Han, Jun-Ge; Lin, Ke-Zhi; Deng, Miao-Wu; Li, Feng

2015-09-01

Despite advances in medical science, the causes of death can sometimes only be determined by pathologists after a complete autopsy. Few studies have investigated the importance of forensic autopsy in medically disputed cases among different levels of institutional settings. Our study aimed to analyze forensic autopsy in 120 cases of medical disputes among five levels of institutional settings between 2001 and 2012 in Wenzhou, China. The results showed an overall concordance rate of 55%. Of the 39% of clinically missed diagnosis, cardiovascular pathology comprises 55.32%, while respiratory pathology accounts for the remaining 44. 68%. Factors that increase the likelihood of missed diagnoses were private clinics, community settings, and county hospitals. These results support that autopsy remains an important tool in establishing causes of death in medically disputed case, which may directly determine or exclude the fault of medical care and therefore in helping in resolving these cases. © 2015 American Academy of Forensic Sciences.

The Use of the State-Trait Anger Expression Inventory-II With Forensic Populations: A Psychometric Critique.

PubMed

Schamborg, Sara; Tully, Ruth J; Browne, Kevin D

2016-08-01

The State-Trait Anger Expression Inventory-II (STAXI-II) is a psychometric assessment that measures the experience, expression, and control of anger in research and clinical settings. Although the STAXI-II is extensively used and its psychometric properties supported, no psychometric critique has yet specifically assessed its utility with forensic populations. The aim of this critique was to explore the validity and reliability of the STAXI-II when used with forensic samples. It was found that the psychometric properties of the STAXI-II, when used with forensic populations, are satisfactory. However, gaps in research and issues that need to be addressed in practice have been highlighted. Although STAXI-II provides a comprehensive measure of anger, it does not capture all aspects of the construct. In addition, the tool does not contain an inherent validity scale, indicating the need to control for social desirability responding when administering the STAXI-II. Practical implications, limitations, and future research will be discussed. © The Author(s) 2015.

Postmortem bone marrow analysis in forensic science: study of 73 cases and review of the literature.

PubMed

Tattoli, Lucia; Tsokos, Michael; Sautter, Julia; Anagnostopoulos, Joannis; Maselli, Eloisa; Ingravallo, Giuseppe; Delia, Mario; Solarino, Biagio

2014-01-01

In forensic sciences, bone marrow (BM) is an alternative matrix in postmortem toxicology because of its good resistance to autolysis and contaminations. Nevertheless, few studies have been focused on postmortem BM morphological changes after pathological stimuli. We examined 73 BM samples from forensic autopsies; causes of death were both natural and traumatic. BM samples were collected from the sternum by needle aspiration and biopsy; in selected cases, immunohistochemistry was performed. Few autolytic changes were found; BM cellularity decreased with increasing age and postmortem interval. Notable cell changes were detected in 45 cases (61.64%): neoplastic (n=4), and non-neoplastic BM findings (n=41), including multiorgan failure/sepsis (n=26), myelodisplastic-like conditions (n=11), and anaphylactic reactions (n=4). The results showed that BM cellularity supported circumstantial and autopsy findings, suggesting that BM samples could be a useful tool in forensic science applications. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The Value of Outsourcing Selected Cases in a Medical Examiner Population: A 10-Year Experience.

PubMed

McCleskey, Brandi C; Reilly, Stephanie D; Atherton, Dan

2017-01-01

Due to increasing caseloads and inadequate staffing, the burden on Coroner/Medical Examiner Offices to comply with recommended autopsy limits for forensic pathologists (FPs) has been difficult. Since 2006, pathologists at the University of Alabama at Birmingham have performed select autopsies for the Alabama Department of Forensic Sciences. Each case was reviewed by a state FP and scene investigator to determine appropriateness for referral. All referred cases received full postmortem examination including microscopic examination and collection of toxicological samples, and toxicology was ordered by the referring FP as appropriate. The final cause and manner of death were determined by the referring state FP after review of all findings. A majority of the 421 cases were ruled accidental deaths (233), most due to drug toxicity. Of the 178 natural deaths, 118 were attributed to cardiovascular disease. Outsourcing select forensic cases can be educational and an effective tool to manage workflow without compromising quality. © 2016 American Academy of Forensic Sciences.

Forensic Analysis of Digital Image Tampering

DTIC Science & Technology

2004-12-01

analysis of when each method fails, which Chapter 4 discusses. Finally, a test image containing an invisible watermark using LSB steganography is...2.2 – Example of invisible watermark using Steganography Software F5 ............. 8 Figure 2.3 – Example of copy-move image forgery [12...Figure 3.11 – Algorithm for JPEG Block Technique ....................................................... 54 Figure 3.12 – “Forged” Image with Result

Development of a mobile toolmark characterization/comparison system [Development of a mobile, automated toolmark characterization/comparison system

DOE PAGES

Chumbley, Scott; Zhang, Song; Morris, Max; ...

2016-11-16

Since the development of the striagraph, various attempts have been made to enhance forensic investigation through the use of measuring and imaging equipment. This study describes the development of a prototype system employing an easy-to-use software interface designed to provide forensic examiners with the ability to measure topography of a toolmarked surface and then conduct various comparisons using a statistical algorithm. Acquisition of the data is carried out using a portable 3D optical profilometer, and comparison of the resulting data files is made using software named “MANTIS” (Mark and Tool Inspection Suite). The system has been tested on laboratory-produced markingsmore » that include fully striated marks (e.g., screwdriver markings), quasistriated markings produced by shear-cut pliers, impression marks left by chisels, rifling marks on bullets, and cut marks produced by knives. Using the system, an examiner has the potential to (i) visually compare two toolmarked surfaces in a manner similar to a comparison microscope and (ii) use the quantitative information embedded within the acquired data to obtain an objective statistical comparison of the data files. Finally, this study shows that, based on the results from laboratory samples, the system has great potential for aiding examiners in conducting comparisons of toolmarks.« less

Development of a mobile toolmark characterization/comparison system [Development of a mobile, automated toolmark characterization/comparison system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chumbley, Scott; Zhang, Song; Morris, Max

Since the development of the striagraph, various attempts have been made to enhance forensic investigation through the use of measuring and imaging equipment. This study describes the development of a prototype system employing an easy-to-use software interface designed to provide forensic examiners with the ability to measure topography of a toolmarked surface and then conduct various comparisons using a statistical algorithm. Acquisition of the data is carried out using a portable 3D optical profilometer, and comparison of the resulting data files is made using software named “MANTIS” (Mark and Tool Inspection Suite). The system has been tested on laboratory-produced markingsmore » that include fully striated marks (e.g., screwdriver markings), quasistriated markings produced by shear-cut pliers, impression marks left by chisels, rifling marks on bullets, and cut marks produced by knives. Using the system, an examiner has the potential to (i) visually compare two toolmarked surfaces in a manner similar to a comparison microscope and (ii) use the quantitative information embedded within the acquired data to obtain an objective statistical comparison of the data files. Finally, this study shows that, based on the results from laboratory samples, the system has great potential for aiding examiners in conducting comparisons of toolmarks.« less

Testing photogrammetry-based techniques for three-dimensional surface documentation in forensic pathology.

PubMed

Urbanová, Petra; Hejna, Petr; Jurda, Mikoláš

2015-05-01

Three-dimensional surface technologies particularly close range photogrammetry and optical surface scanning have recently advanced into affordable, flexible and accurate techniques. Forensic postmortem investigation as performed on a daily basis, however, has not yet fully benefited from their potentials. In the present paper, we tested two approaches to 3D external body documentation - digital camera-based photogrammetry combined with commercial Agisoft PhotoScan(®) software and stereophotogrammetry-based Vectra H1(®), a portable handheld surface scanner. In order to conduct the study three human subjects were selected, a living person, a 25-year-old female, and two forensic cases admitted for postmortem examination at the Department of Forensic Medicine, Hradec Králové, Czech Republic (both 63-year-old males), one dead to traumatic, self-inflicted, injuries (suicide by hanging), the other diagnosed with the heart failure. All three cases were photographed in 360° manner with a Nikon 7000 digital camera and simultaneously documented with the handheld scanner. In addition to having recorded the pre-autopsy phase of the forensic cases, both techniques were employed in various stages of autopsy. The sets of collected digital images (approximately 100 per case) were further processed to generate point clouds and 3D meshes. Final 3D models (a pair per individual) were counted for numbers of points and polygons, then assessed visually and compared quantitatively using ICP alignment algorithm and a cloud point comparison technique based on closest point to point distances. Both techniques were proven to be easy to handle and equally laborious. While collecting the images at autopsy took around 20min, the post-processing was much more time-demanding and required up to 10h of computation time. Moreover, for the full-body scanning the post-processing of the handheld scanner required rather time-consuming manual image alignment. In all instances the applied approaches produced high-resolution photorealistic, real sized or easy to calibrate 3D surface models. Both methods equally failed when the scanned body surface was covered with body hair or reflective moist areas. Still, it can be concluded that single camera close range photogrammetry and optical surface scanning using Vectra H1 scanner represent relatively low-cost solutions which were shown to be beneficial for postmortem body documentation in forensic pathology. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

A Test of the DSP Sexing Method on CT Images from a Modern French Sample.

PubMed

Mestekova, Sarka; Bruzek, Jaroslav; Veleminska, Jana; Chaumoitre, Kathia

2015-09-01

The hip bone is considered to be one of the most reliable indicators in sex determination. The aim of this study was to test the reliability of the DSP method for the hip bone proposed by Murail et al. (Bull Mem Soc Anthropol Paris, 17, 2005, 167) on a sample from a present-day population in France (52 males and 54 females). Ten linear measurements were collected from three-dimensional models derived from computed tomography images (CTI). To quantify the proportions of correct sex determinations, a more rigorous posterior probability threshold of 0.95 was applied. Using all 10 measurements, 92.3% of males and 97.2% of females were sexed correctly. The percentage of undetermined specimens varied depending on the used combination of measurements; however, all sexes were assigned with a 100% accuracy. This study proves that DSP is an appropriate and reliable tool for sex determination, based on dimensions obtained from CTI. © 2015 American Academy of Forensic Sciences.

Application of 3D documentation and geometric reconstruction methods in traffic accident analysis: with high resolution surface scanning, radiological MSCT/MRI scanning and real data based animation.

PubMed

Buck, Ursula; Naether, Silvio; Braun, Marcel; Bolliger, Stephan; Friederich, Hans; Jackowski, Christian; Aghayev, Emin; Christe, Andreas; Vock, Peter; Dirnhofer, Richard; Thali, Michael J

2007-07-20

The examination of traffic accidents is daily routine in forensic medicine. An important question in the analysis of the victims of traffic accidents, for example in collisions between motor vehicles and pedestrians or cyclists, is the situation of the impact. Apart from forensic medical examinations (external examination and autopsy), three-dimensional technologies and methods are gaining importance in forensic investigations. Besides the post-mortem multi-slice computed tomography (MSCT) and magnetic resonance imaging (MRI) for the documentation and analysis of internal findings, highly precise 3D surface scanning is employed for the documentation of the external body findings and of injury-inflicting instruments. The correlation of injuries of the body to the injury-inflicting object and the accident mechanism are of great importance. The applied methods include documentation of the external and internal body and the involved vehicles and inflicting tools as well as the analysis of the acquired data. The body surface and the accident vehicles with their damages were digitized by 3D surface scanning. For the internal findings of the body, post-mortem MSCT and MRI were used. The analysis included the processing of the obtained data to 3D models, determination of the driving direction of the vehicle, correlation of injuries to the vehicle damages, geometric determination of the impact situation and evaluation of further findings of the accident. In the following article, the benefits of the 3D documentation and computer-assisted, drawn-to-scale 3D comparisons of the relevant injuries with the damages to the vehicle in the analysis of the course of accidents, especially with regard to the impact situation, are shown on two examined cases.

Microbial soil community analyses for forensic science: Application to a blind test.

PubMed

Demanèche, Sandrine; Schauser, Leif; Dawson, Lorna; Franqueville, Laure; Simonet, Pascal

2017-01-01

Soil complexity, heterogeneity and transferability make it valuable in forensic investigations to help obtain clues as to the origin of an unknown sample, or to compare samples from a suspect or object with samples collected at a crime scene. In a few countries, soil analysis is used in matters from site verification to estimates of time after death. However, up to date the application or use of soil information in criminal investigations has been limited. In particular, comparing bacterial communities in soil samples could be a useful tool for forensic science. To evaluate the relevance of this approach, a blind test was performed to determine the origin of two questioned samples (one from the mock crime scene and the other from a 50:50 mixture of the crime scene and the alibi site) compared to three control samples (soil samples from the crime scene, from a context site 25m away from the crime scene and from the alibi site which was the suspect's home). Two biological methods were used, Ribosomal Intergenic Spacer Analysis (RISA), and 16S rRNA gene sequencing with Illumina Miseq, to evaluate the discriminating power of soil bacterial communities. Both techniques discriminated well between soils from a single source, but a combination of both techniques was necessary to show that the origin was a mixture of soils. This study illustrates the potential of applying microbial ecology methodologies in soil as an evaluative forensic tool. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Burned bodies: post-mortem computed tomography, an essential tool for modern forensic medicine.

PubMed

Coty, J-B; Nedelcu, C; Yahya, S; Dupont, V; Rougé-Maillart, C; Verschoore, M; Ridereau Zins, C; Aubé, C

2018-06-07

Currently, post-mortem computed tomography (PMCT) has become an accessible and contemporary tool for forensic investigations. In the case of burn victims, it provides specific semiologies requiring a prudent understanding to differentiate between the normal post-mortem changes from heat-related changes. The aim of this pictorial essay is to provide to the radiologist the keys to establish complete and focused reports in cases of PMCT of burn victims. Thus, the radiologist must discern all the contextual divergences with the forensic history, and must be able to report all the relevant elements to answer to the forensic pathologist the following questions: Are there tomographic features that could help to identify the victim? Is there evidence of remains of biological fluids in liquid form available for toxicological analysis and DNA sampling? Is there another obvious cause of death than heat-related lesions, especially metallic foreign bodies of ballistic origin? Finally, what are the characteristic burn-related injuries seen on the corpse that should be sought during the autopsy? • CT is highly useful to find features permitting the identification of a severely burned body. • PMCT is a major asset in gunshot injuries to depict ballistic foreign bodies in the burned cadavers. • CT is able to recognise accessible blood for tests versus heat clot (air-crescent sign). • Heat-related fractures are easily differentiated from traumatic fractures. • Epidural collections with a subdural appearance are typical heat-related head lesions.

Detecting 2LSB steganography using extended pairs of values analysis

NASA Astrophysics Data System (ADS)

Khalind, Omed; Aziz, Benjamin

2014-05-01

In this paper, we propose an extended pairs of values analysis to detect and estimate the amount of secret messages embedded with 2LSB replacement in digital images based on chi-square attack and regularity rate in pixel values. The detection process is separated from the estimation of the hidden message length, as it is the main requirement of any steganalysis method. Hence, the detection process acts as a discrete classifier, which classifies a given set of images into stego and clean classes. The method can accurately detect 2LSB replacement even when the message length is about 10% of the total capacity, it also reaches its best performance with an accuracy of higher than 0.96 and a true positive rate of more than 0.997 when the amount of data are 20% to 100% of the total capacity. However, the method puts no assumptions neither on the image nor the secret message, as it tested with two sets of 3000 images, compressed and uncompressed, embedded with a random message for each case. This method of detection could also be used as an automated tool to analyse a bulk of images for hidden contents, which could be used by digital forensics analysts in their investigation process.

Passive forensics for copy-move image forgery using a method based on DCT and SVD.

PubMed

Zhao, Jie; Guo, Jichang

2013-12-10

As powerful image editing tools are widely used, the demand for identifying the authenticity of an image is much increased. Copy-move forgery is one of the tampering techniques which are frequently used. Most existing techniques to expose this forgery need to improve the robustness for common post-processing operations and fail to precisely locate the tampering region especially when there are large similar or flat regions in the image. In this paper, a robust method based on DCT and SVD is proposed to detect this specific artifact. Firstly, the suspicious image is divided into fixed-size overlapping blocks and 2D-DCT is applied to each block, then the DCT coefficients are quantized by a quantization matrix to obtain a more robust representation of each block. Secondly, each quantized block is divided non-overlapping sub-blocks and SVD is applied to each sub-block, then features are extracted to reduce the dimension of each block using its largest singular value. Finally, the feature vectors are lexicographically sorted, and duplicated image blocks will be matched by predefined shift frequency threshold. Experiment results demonstrate that our proposed method can effectively detect multiple copy-move forgery and precisely locate the duplicated regions, even when an image was distorted by Gaussian blurring, AWGN, JPEG compression and their mixed operations. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

FBI's DNA analysis program

NASA Astrophysics Data System (ADS)

Brown, John R.

1994-03-01

Forensic DNA profiling technology is a significant law enforcement tool due to its superior discriminating power. Applying the principles of population genetics to the DNA profile obtained in violent crime investigations results in low frequency of occurrence estimates for the DNA profile. These estimates often range from a frequency of occurrence of 1 in 50 unrelated individuals to 1 in a million unrelated individuals or even smaller. It is this power to discriminate among individuals in the population that has propelled forensic DNA technology to the forefront of forensic testing in violent crime cases. Not only is the technology extremely powerful in including or excluding a criminal suspect as the perpetrator, but it also gives rise to the potential of identifying criminal suspects in cases where the investigators of unknown suspect cases have exhausted all other available leads.

Data Hiding and the Statistics of Images

NASA Astrophysics Data System (ADS)

Cox, Ingemar J.

The fields of digital watermarking, steganography and steganalysis, and content forensics are closely related. In all cases, there is a class of images that is considered “natural”, i.e. images that do not contain watermarks, images that do not contain covert messages, or images that have not been tampered with. And, conversely, there is a class of images that is considered to be “unnatural”, i.e. images that contain watermarks, images that contain covert messages, or images that have been tampered with.

The current status of forensic science laboratory accreditation in Europe.

PubMed

Malkoc, Ekrem; Neuteboom, Wim

2007-04-11

Forensic science is gaining some solid ground in the area of effective crime prevention, especially in the areas where more sophisticated use of available technology is prevalent. All it takes is high-level cooperation among nations that can help them deal with criminality that adopts a cross-border nature more and more. It is apparent that cooperation will not be enough on its own and this development will require a network of qualified forensic laboratories spread over Europe. It is argued in this paper that forensic science laboratories play an important role in the fight against crime. Another, complimentary argument is that forensic science laboratories need to be better involved in the fight against crime. For this to be achieved, a good level of cooperation should be established and maintained. It is also noted that harmonization is required for such cooperation and seeking accreditation according to an internationally acceptable standard, such as ISO/IEC 17025, will eventually bring harmonization as an end result. Because, ISO/IEC 17025 as an international standard, has been a tool that helps forensic science laboratories in the current trend towards accreditation that can be observed not only in Europe, but also in the rest of the world of forensic science. In the introduction part, ISO/IEC 17025 states that "the acceptance of testing and calibration results between countries should be facilitated if laboratories comply with this international standard and if they obtain accreditation from bodies which have entered into mutual recognition agreements with equivalent bodies in other countries using this international standard." Furthermore, it is emphasized that the use of this international standard will assist in the harmonization of standards and procedures. The background of forensic science cooperation in Europe will be explained by using an existing European forensic science network, i.e. ENFSI, in order to understand the current status of forensic science in Europe better. The Council of Europe and the European Union approaches to forensic science will also be discussed by looking at the legal instruments and documents published by these two European organizations. Data collected from 52 European forensic science laboratories will be examined and findings will be evaluated from a quality assurance and accreditation point of view. The need for harmonization and accreditation in forensic science will be emphasized. The steps that should be taken at the European level for increasing and strengthening the role of European forensic science laboratories in the fight against crime will be given as recommendations in the conclusion.

Development and validation of InnoQuant™, a sensitive human DNA quantitation and degradation assessment method for forensic samples using high copy number mobile elements Alu and SVA.

PubMed

Pineda, Gina M; Montgomery, Anne H; Thompson, Robyn; Indest, Brooke; Carroll, Marion; Sinha, Sudhir K

2014-11-01

There is a constant need in forensic casework laboratories for an improved way to increase the first-pass success rate of forensic samples. The recent advances in mini STR analysis, SNP, and Alu marker systems have now made it possible to analyze highly compromised samples, yet few tools are available that can simultaneously provide an assessment of quantity, inhibition, and degradation in a sample prior to genotyping. Currently there are several different approaches used for fluorescence-based quantification assays which provide a measure of quantity and inhibition. However, a system which can also assess the extent of degradation in a forensic sample will be a useful tool for DNA analysts. Possessing this information prior to genotyping will allow an analyst to more informatively make downstream decisions for the successful typing of a forensic sample without unnecessarily consuming DNA extract. Real-time PCR provides a reliable method for determining the amount and quality of amplifiable DNA in a biological sample. Alu are Short Interspersed Elements (SINE), approximately 300bp insertions which are distributed throughout the human genome in large copy number. The use of an internal primer to amplify a segment of an Alu element allows for human specificity as well as high sensitivity when compared to a single copy target. The advantage of an Alu system is the presence of a large number (>1000) of fixed insertions in every human genome, which minimizes the individual specific variation possible when using a multi-copy target quantification system. This study utilizes two independent retrotransposon genomic targets to obtain quantification of an 80bp "short" DNA fragment and a 207bp "long" DNA fragment in a degraded DNA sample in the multiplex system InnoQuant™. The ratio of the two quantitation values provides a "Degradation Index", or a qualitative measure of a sample's extent of degradation. The Degradation Index was found to be predictive of the observed loss of STR markers and alleles as degradation increases. Use of a synthetic target as an internal positive control (IPC) provides an additional assessment for the presence of PCR inhibitors in the test sample. In conclusion, a DNA based qualitative/quantitative/inhibition assessment system that accurately predicts the status of a biological sample, will be a valuable tool for deciding which DNA test kit to utilize and how much target DNA to use, when processing compromised forensic samples for DNA testing. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Straightforward fabrication of black nano silica dusting powder for latent fingerprint imaging

NASA Astrophysics Data System (ADS)

Komalasari, Isna; Krismastuti, Fransiska Sri Herwahyu; Elishian, Christine; Handayani, Eka Mardika; Nugraha, Willy Cahya; Ketrin, Rosi

2017-11-01

Imaging of latent fingerprint pattern (aka fingermark) is one of the most important and accurate detection methods in forensic investigation because of the characteristic of individual fingerprint. This detection technique relies on the mechanical adherence of fingerprint powder to the moisture and oily component of the skin left on the surface. The particle size of fingerprint powder is one of the critical parameter to obtain excellent fingerprint image. This study develops a simple, cheap and straightforward method to fabricate Nano size black dusting fingerprint powder based on Nano silica and applies the powder to visualize latent fingerprint. The nanostructured silica was prepared from tetraethoxysilane (TEOS) and then modified with Nano carbon, methylene blue and sodium acetate to color the powder. Finally, as a proof-of-principle, the ability of this black Nano silica dusting powder to image latent fingerprint is successfully demonstrated and the results show that this fingerprint powder provides clearer fingerprint pattern compared to the commercial one highlighting the potential application of the nanostructured silica in forensic science.

Inexpensive, Near-Infrared Imaging of Artwork Using a Night-Vision Webcam for Chemistry-of-Art Courses

ERIC Educational Resources Information Center

Smith, Gregory D.; Nunan, Elizabeth; Walker, Claire; Kushel, Dan

2009-01-01

Imaging of artwork is an important aspect of art conservation, technical art history, and art authentication. Many forms of near-infrared (NIR) imaging are used by conservators, archaeologists, forensic scientists, and technical art historians to examine the underdrawings of paintings, to detect damages and restorations, to enhance faded or…

Next generation DRM: cryptography or forensics?

NASA Astrophysics Data System (ADS)

Robert, Arnaud

2009-02-01

Current content protection systems rely primarily on applied cryptographic techniques but there is an increased use of forensic solutions in images, music and video distribution alike. The two approaches differ significantly, both in terms of technology and in terms of strategy, and thus it begs the question: will one approach take over in the long run, and if so which one? Discussing the evolution of both cryptographic and forensic solutions, we conclude that neither approach is ideal for all constituents, and that in the video space at least they will continue to co-exist for the foreseeable future - even if this may not be the case for other media types. We also analyze shortcomings of these approaches, and suggest that new solutions are necessary in this still emerging marketplace.

[Video recording system of endoscopic procedures for digital forensics].

PubMed

Endo, Chiaki; Sakurada, A; Kondo, T

2009-07-01

Recently, endoscopic procedures including surgery, intervention, and examination have been widely performed. Medical practitioners are required to record the procedures precisely in order to check the procedures retrospectively and to get the legally reliable record. Medical Forensic System made by KS Olympus Japan offers 2 kinds of movie and patient's data, such as heart rate, blood pressure, and Spo, which are simultaneously recorded. We installed this system into the bronchoscopy room and have experienced its benefit. Under this system, we can get bronchoscopic image, bronchoscopy room view, and patient's data simultaneously. We can check the quality of the bronchoscopic procedures retrospectively, which is useful for bronchoscopy staff training. Medical Forensic System should be installed in any kind of endoscopic procedures.

A survey of social media data analysis for physical activity surveillance.

PubMed

Liu, Sam; Young, Sean D

2018-07-01

Social media data can provide valuable information regarding people's behaviors and health outcomes. Previous studies have shown that social media data can be extracted to monitor and predict infectious disease outbreaks. These same approaches can be applied to other fields including physical activity research and forensic science. Social media data have the potential to provide real-time monitoring and prediction of physical activity level in a given region. This tool can be valuable to public health organizations as it can overcome the time lag in the reporting of physical activity epidemiology data faced by traditional research methods (e.g. surveys, observational studies). As a result, this tool could help public health organizations better mobilize and target physical activity interventions. The first part of this paper aims to describe current approaches (e.g. topic modeling, sentiment analysis and social network analysis) that could be used to analyze social media data to provide real-time monitoring of physical activity level. The second aim of this paper was to discuss ways to apply social media analysis to other fields such as forensic sciences and provide recommendations to further social media research. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Using drone-mounted cameras for on-site body documentation: 3D mapping and active survey.

PubMed

Urbanová, Petra; Jurda, Mikoláš; Vojtíšek, Tomáš; Krajsa, Jan

2017-12-01

Recent advances in unmanned aerial technology have substantially lowered the cost associated with aerial imagery. As a result, forensic practitioners are today presented with easy low-cost access to aerial photographs at remote locations. The present paper aims to explore boundaries in which the low-end drone technology can operate as professional crime scene equipment, and to test the prospects of aerial 3D modeling in the forensic context. The study was based on recent forensic cases of falls from height admitted for postmortem examinations. Three mock outdoor forensic scenes featuring a dummy, skeletal remains and artificial blood were constructed at an abandoned quarry and subsequently documented using a commercial DJI Phantom 2 drone equipped with a GoPro HERO 4 digital camera. In two of the experiments, the purpose was to conduct aerial and ground-view photography and to process the acquired images with a photogrammetry protocol (using Agisoft PhotoScan ® 1.2.6) in order to generate 3D textured models. The third experiment tested the employment of drone-based video recordings in mapping scattered body parts. The results show that drone-based aerial photography is capable of producing high-quality images, which are appropriate for building accurate large-scale 3D models of a forensic scene. If, however, high-resolution top-down three-dimensional scene documentation featuring details on a corpse or other physical evidence is required, we recommend building a multi-resolution model by processing aerial and ground-view imagery separately. The video survey showed that using an overview recording for seeking out scattered body parts was efficient. In contrast, the less easy-to-spot evidence, such as bloodstains, was detected only after having been marked properly with crime scene equipment. Copyright © 2017 Elsevier B.V. All rights reserved.

Forensic steganalysis: determining the stego key in spatial domain steganography

NASA Astrophysics Data System (ADS)

Fridrich, Jessica; Goljan, Miroslav; Soukal, David; Holotyak, Taras

2005-03-01

This paper is an extension of our work on stego key search for JPEG images published at EI SPIE in 2004. We provide a more general theoretical description of the methodology, apply our approach to the spatial domain, and add a method that determines the stego key from multiple images. We show that in the spatial domain the stego key search can be made significantly more efficient by working with the noise component of the image obtained using a denoising filter. The technique is tested on the LSB embedding paradigm and on a special case of embedding by noise adding (the +/-1 embedding). The stego key search can be performed for a wide class of steganographic techniques even for sizes of secret message well below those detectable using known methods. The proposed strategy may prove useful to forensic analysts and law enforcement.

Tooth labeling in cone-beam CT using deep convolutional neural network for forensic identification

NASA Astrophysics Data System (ADS)

Miki, Yuma; Muramatsu, Chisako; Hayashi, Tatsuro; Zhou, Xiangrong; Hara, Takeshi; Katsumata, Akitoshi; Fujita, Hiroshi

2017-03-01

In large disasters, dental record plays an important role in forensic identification. However, filing dental charts for corpses is not an easy task for general dentists. Moreover, it is laborious and time-consuming work in cases of large scale disasters. We have been investigating a tooth labeling method on dental cone-beam CT images for the purpose of automatic filing of dental charts. In our method, individual tooth in CT images are detected and classified into seven tooth types using deep convolutional neural network. We employed the fully convolutional network using AlexNet architecture for detecting each tooth and applied our previous method using regular AlexNet for classifying the detected teeth into 7 tooth types. From 52 CT volumes obtained by two imaging systems, five images each were randomly selected as test data, and the remaining 42 cases were used as training data. The result showed the tooth detection accuracy of 77.4% with the average false detection of 5.8 per image. The result indicates the potential utility of the proposed method for automatic recording of dental information.

The application of imaging technologies in the detection of trace evidence in forensic medical investigation.

PubMed

Cocks, Jeannie; du Toit-Prinsloo, Lorraine; Steffens, Francois; Saayman, Gert

2015-04-01

In a country notorious for violent crime, it seems that South African medico-legal laboratories make minimal application of technology in the death investigation process and little attention is given to trace evidence. Non-destructive, non-invasive, portable and cost-effective tools are required. This study was conducted at the Pretoria Medico-Legal Laboratory. The surface area of the bodies and clothing of victims of fatal interpersonal violence were examined using a torch, magnifying lamp, portable digital microscope and alternate light source to gauge their potential for trace evidence detection. Most studies apply these and similar tools to inert surfaces, with few focusing on their application to human skin. There was a statistically significant difference in the detection of many of the evidence types between the naked-eye observation of the pathologists and the technologies. The different imaging technologies were compared as to their cost, evidence detection ability and ease of use. The most common evidence types discovered on the bodies and clothing of victims of fatal interpersonal violence, as well as the propensity of each tool to detect these, was evaluated in order to devise the best option for incorporation into the Pretoria Medico-Legal Laboratory routine. The digital microscope performed best overall followed by the magnifying lamp, torch and the Polilight(®). This study aimed to justify the investment of more time, effort and funding into trace evidence recovery in the South African mortuary environment. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Fabricating Synthetic Data in Support of Training for Domestic Terrorist Activity Data Mining Research

DTIC Science & Technology

2010-09-01

of Mannheim seeks to produce realistic digital images for student analysis ( Moch & Freiling, 2009). Using instructor generated scripts and the...laboratory. ACM Transactions on Information and System Security, (pp. 262-294). Moch , C., & Freiling, F. (2009). The forensic image generator

Assessing various Infrared (IR) microscopic imaging techniques for post-mortem interval evaluation of human skeletal remains.

PubMed

Woess, Claudia; Unterberger, Seraphin Hubert; Roider, Clemens; Ritsch-Marte, Monika; Pemberger, Nadin; Cemper-Kiesslich, Jan; Hatzer-Grubwieser, Petra; Parson, Walther; Pallua, Johannes Dominikus

2017-01-01

Due to the influence of many environmental processes, a precise determination of the post-mortem interval (PMI) of skeletal remains is known to be very complicated. Although methods for the investigation of the PMI exist, there still remains much room for improvement. In this study the applicability of infrared (IR) microscopic imaging techniques such as reflection-, ATR- and Raman- microscopic imaging for the estimation of the PMI of human skeletal remains was tested. PMI specific features were identified and visualized by overlaying IR imaging data with morphological tissue structures obtained using light microscopy to differentiate between forensic and archaeological bone samples. ATR and reflection spectra revealed that a more prominent peak at 1042 cm-1 (an indicator for bone mineralization) was observable in archeological bone material when compared with forensic samples. Moreover, in the case of the archaeological bone material, a reduction in the levels of phospholipids, proteins, nucleic acid sugars, complex carbohydrates as well as amorphous or fully hydrated sugars was detectable at (reciprocal wavelengths/energies) between 3000 cm-1 to 2800 cm-1. Raman spectra illustrated a similar picture with less ν2PO43-at 450 cm-1 and ν4PO43- from 590 cm-1 to 584 cm-1, amide III at 1272 cm-1 and protein CH2 deformation at 1446 cm-1 in archeological bone material/samples/sources. A semi-quantitative determination of various distributions of biomolecules by chemi-maps of reflection- and ATR- methods revealed that there were less carbohydrates and complex carbohydrates as well as amorphous or fully hydrated sugars in archaeological samples compared with forensic bone samples. Raman- microscopic imaging data showed a reduction in B-type carbonate and protein α-helices after a PMI of 3 years. The calculated mineral content ratio and the organic to mineral ratio displayed that the mineral content ratio increases, while the organic to mineral ratio decreases with time. Cluster-analyses of data from Raman microscopic imaging reconstructed histo-anatomical features in comparison to the light microscopic image and finally, by application of principal component analyses (PCA), it was possible to see a clear distinction between forensic and archaeological bone samples. Hence, the spectral characterization of inorganic and organic compounds by the afore mentioned techniques, followed by analyses such as multivariate imaging analysis (MIAs) and principal component analyses (PCA), appear to be suitable for the post mortem interval (PMI) estimation of human skeletal remains.

Assessing various Infrared (IR) microscopic imaging techniques for post-mortem interval evaluation of human skeletal remains

PubMed Central

Roider, Clemens; Ritsch-Marte, Monika; Pemberger, Nadin; Cemper-Kiesslich, Jan; Hatzer-Grubwieser, Petra; Parson, Walther; Pallua, Johannes Dominikus

2017-01-01

Due to the influence of many environmental processes, a precise determination of the post-mortem interval (PMI) of skeletal remains is known to be very complicated. Although methods for the investigation of the PMI exist, there still remains much room for improvement. In this study the applicability of infrared (IR) microscopic imaging techniques such as reflection-, ATR- and Raman- microscopic imaging for the estimation of the PMI of human skeletal remains was tested. PMI specific features were identified and visualized by overlaying IR imaging data with morphological tissue structures obtained using light microscopy to differentiate between forensic and archaeological bone samples. ATR and reflection spectra revealed that a more prominent peak at 1042 cm-1 (an indicator for bone mineralization) was observable in archeological bone material when compared with forensic samples. Moreover, in the case of the archaeological bone material, a reduction in the levels of phospholipids, proteins, nucleic acid sugars, complex carbohydrates as well as amorphous or fully hydrated sugars was detectable at (reciprocal wavelengths/energies) between 3000 cm-1 to 2800 cm-1. Raman spectra illustrated a similar picture with less ν2PO43−at 450 cm-1 and ν4PO43− from 590 cm-1 to 584 cm-1, amide III at 1272 cm-1 and protein CH2 deformation at 1446 cm-1 in archeological bone material/samples/sources. A semi-quantitative determination of various distributions of biomolecules by chemi-maps of reflection- and ATR- methods revealed that there were less carbohydrates and complex carbohydrates as well as amorphous or fully hydrated sugars in archaeological samples compared with forensic bone samples. Raman- microscopic imaging data showed a reduction in B-type carbonate and protein α-helices after a PMI of 3 years. The calculated mineral content ratio and the organic to mineral ratio displayed that the mineral content ratio increases, while the organic to mineral ratio decreases with time. Cluster-analyses of data from Raman microscopic imaging reconstructed histo-anatomical features in comparison to the light microscopic image and finally, by application of principal component analyses (PCA), it was possible to see a clear distinction between forensic and archaeological bone samples. Hence, the spectral characterization of inorganic and organic compounds by the afore mentioned techniques, followed by analyses such as multivariate imaging analysis (MIAs) and principal component analyses (PCA), appear to be suitable for the post mortem interval (PMI) estimation of human skeletal remains. PMID:28334006

Forensic Imaging for Causal Investigation of Death

PubMed Central

Sassenberg, Alina; Schlemmer, Heinz-Peter; Yen, Kathrin

2014-01-01

A 63-year-old man was found in the street after overrun by a car. Postmortem CT revealed multiple bone fractures, but surprisingly all without any relevant hemorrhage which would have been expected under such circumstances. A round radiopaque formation was found in the duodenum, which was reminiscent of ingested tablets. The toxicological analysis revealed high concentrations of zopiclone and alcohol. By combining radiologic and forensic results, zopiclone and alcohol intoxication were concluded as the cause of death, followed by a postmortem overrun accident. PMID:24644410

Forensic applications of ambient ionization mass spectrometry.

PubMed

Ifa, Demian R; Jackson, Ayanna U; Paglia, Giuseppe; Cooks, R Graham

2009-08-01

This review highlights and critically assesses forensic applications in the developing field of ambient ionization mass spectrometry. Ambient ionization methods permit the ionization of samples outside the mass spectrometer in the ordinary atmosphere, with minimal sample preparation. Several ambient ionization methods have been created since 2004 and they utilize different mechanisms to create ions for mass-spectrometric analysis. Forensic applications of these techniques--to the analysis of toxic industrial compounds, chemical warfare agents, illicit drugs and formulations, explosives, foodstuff, inks, fingerprints, and skin--are reviewed. The minimal sample pretreatment needed is illustrated with examples of analysis from complex matrices (e.g., food) on various substrates (e.g., paper). The low limits of detection achieved by most of the ambient ionization methods for compounds of forensic interest readily offer qualitative confirmation of chemical identity; in some cases quantitative data are also available. The forensic applications of ambient ionization methods are a growing research field and there are still many types of applications which remain to be explored, particularly those involving on-site analysis. Aspects of ambient ionization currently undergoing rapid development include molecular imaging and increased detection specificity through simultaneous chemical reaction and ionization by addition of appropriate chemical reagents.

Forensic identification of resampling operators: A semi non-intrusive approach.

PubMed

Cao, Gang; Zhao, Yao; Ni, Rongrong

2012-03-10

Recently, several new resampling operators have been proposed and successfully invalidate the existing resampling detectors. However, the reliability of such anti-forensic techniques is unaware and needs to be investigated. In this paper, we focus on the forensic identification of digital image resampling operators including the traditional type and the anti-forensic type which hides the trace of traditional resampling. Various resampling algorithms involving geometric distortion (GD)-based, dual-path-based and postprocessing-based are investigated. The identification is achieved in the manner of semi non-intrusive, supposing the resampling software could be accessed. Given an input pattern of monotone signal, polarity aberration of GD-based resampled signal's first derivative is analyzed theoretically and measured by effective feature metric. Dual-path-based and postprocessing-based resampling can also be identified by feeding proper test patterns. Experimental results on various parameter settings demonstrate the effectiveness of the proposed approach. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Testing a Novel 3D Printed Radiographic Imaging Device for Use in Forensic Odontology.

PubMed

Newcomb, Tara L; Bruhn, Ann M; Giles, Bridget; Garcia, Hector M; Diawara, Norou

2017-01-01

There are specific challenges related to forensic dental radiology and difficulties in aligning X-ray equipment to teeth of interest. Researchers used 3D printing to create a new device, the combined holding and aiming device (CHAD), to address the positioning limitations of current dental X-ray devices. Participants (N = 24) used the CHAD, soft dental wax, and a modified external aiming device (MEAD) to determine device preference, radiographer's efficiency, and technique errors. Each participant exposed six X-rays per device for a total of 432 X-rays scored. A significant difference was found at the 0.05 level between the three devices (p = 0.0015), with the MEAD having the least amount of total errors and soft dental wax taking the least amount of time. Total errors were highest when participants used soft dental wax-both the MEAD and the CHAD performed best overall. Further research in forensic dental radiology and use of holding devices is needed. © 2016 American Academy of Forensic Sciences.

Discrete traits of the sternum and ribs: a useful contribution to identification in forensic anthropology and medicine.

PubMed

Verna, Emeline; Piercecchi-Marti, Marie-Dominique; Chaumoitre, Kathia; Bartoli, Christophe; Leonetti, Georges; Adalian, Pascal

2013-05-01

During forensic anthropological investigation, biological profile is determined by age, sex, ancestry, and stature. However, several individuals may share the same profile. Observation of discrete traits can yield useful information and contribute to identification. This research establishes the frequency of discrete traits of the sternum and ribs in a modern population in southern France, using 500 computer tomography (CT) scans of individuals aged 15-60 years. Only discrete traits with a frequency lower than 10% according to the literature were considered, a total of eight traits. All scans examined were three-dimensional (3D) volume renderings from DICOM images. In our population, the frequency of all the discrete traits was lower than 5%. None were associated with sex or age, with the exception of a single trait, the end of the xiphoid process. Our findings can usefully be applied for identification purposes in forensic anthropology and medicine. © 2013 American Academy of Forensic Sciences.

Forensic tools for the diagnosis of electrocution death: Case study and literature review.

PubMed

Mondello, Cristina; Micali, Antonio; Cardia, Luigi; Argo, Antonina; Zerbo, Stefania; Spagnolo, Elvira Ventura

2018-06-01

Diagnosis of death by electrocution may be difficult when electric marking is not visible or unclear. Accordingly, the body of a man who appeared to have died from accidental electrocution was carefully forensically analysed. Macroscopic and microscopic analysis of the current mark was carried out using a variable-pressure scanning electron microscope equipped with energy dispersive X-ray microanalyser to highlight skin metallisation, indicating the presence of iron and zinc. The histological findings of electrocution myocardial damage were supported by the results of biochemical analysis which demonstrated the creatine kinase-MB and cardiac troponin I elevation. The effects of electric current flow were also highlighted by perforations of endothelial surface of a pulmonary artery using scanning electron microscope, and all the results were analysed by the main tools suggested in the literature.

Mexican mestizo population sub-structure: effects on genetic and forensic statistical parameters.

PubMed

Noris, Gino; Santana, Carla; Meraz-Ríos, Marco Antonio; de Lourdes Munoz, María; Majluf-Cruz, Abraham; Magaña, Jonathan J; Granados, Julio; Quezada, Rosa; Revilla, María Cristina; Martínez-Salas, Sergio; Xihuitl, Salvador; Martínez de la Escalera, Gonzalo; Díaz-Badillo, Alvaro; Calderon-Aranda, Emma S; Gómez, Rocío

2012-12-01

Since Mexican mestizos are an admixed population, it is necessary to determine the effects that the substructure of the population has on genetic and forensic parameters. With this aim, a study was performed with 15 STR loci (CODIS plus D2S1338 and D19S433) on 1,640 unrelated Mexican mestizos. We determine allele and genotypic frequencies observing departure from Hardy-Weinberg expectation (12 out of 15 loci, with an excess of homozygotes, Fis > 0), as well as pairs of loci in an apparent linkage disequilibrium (13 of 92 loci). We conducted a test for genetic population stratification, the results show that the Mexican mestizo population is substructured into three subgroups, which are in HW and linkage equilibrium. The combination of the 15 loci in the whole population has high forensic efficiency with the capacity to genetically discriminate one individual in one quintillion (1/10(18)). Our data potentially validates the use of these 15 STR loci to establish forensic identity and parentage testing for legal purposes, and offers a powerful tool for genetic variation analysis. However, given that the population is stratified, we highly recommend applying a correction with the inbreeding coefficient in calculations of paternity and forensic studies to avoid erroneous assumptions.

Shifts in soil biodiversity-A forensic comparison between Sus scrofa domesticus and vegetation decomposition.

PubMed

Olakanye, Ayodeji O; Thompson, Tim; Ralebitso-Senior, T Komang

2015-12-01

In a forensic context, microbial-mediated cadaver decomposition and nutrient recycling cannot be overlooked. As a result, forensic ecogenomics research has intensified to gain a better understanding of cadaver/soil ecology interactions as a powerful potential tool for forensic practitioners. For this study, domestic pig (Sus scrofa domesticus) (4g) and grass (Agrostis/Festuca spp) cuttings (4g) were buried (July 2013 to July 2014) in sandy clay loam (80 g) triplicates in sealed microcosms (127 ml; 50 × 70 cm) with parallel soil only controls. The effects of the two carbon sources were determined by monitoring key environmental factors and changes in soil bacterial (16S rRNA gene) and fungal (18S rRNA gene) biodiversity. Soil pH changes showed statistically significant differences (p<0.05) between the treatments. The measured ecological diversity indices (Shannon-Wiener, HꞋ; Simpson, D; and richness, S) of the 16S rRNA and 18S rRNA gene profiles also revealed differences between the treatments, with bacterial and fungal community dominance recorded in the presence of S. scrofa domesticus and grass trimming decomposition, respectively. In contrast, no statistically significant difference in evenness (p>0.05) was observed between the treatments. Copyright © 2015 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

Forensic botany as a useful tool in the crime scene: Report of a case.

PubMed

Margiotta, Gabriele; Bacaro, Giovanni; Carnevali, Eugenia; Severini, Simona; Bacci, Mauro; Gabbrielli, Mario

2015-08-01

The ubiquitous presence of plant species makes forensic botany useful for many criminal cases. Particularly, bryophytes are useful for forensic investigations because many of them are clonal and largely distributed. Bryophyte shoots can easily become attached to shoes and clothes and it is possible to be found on footwear, providing links between crime scene and individuals. We report a case of suicide of a young girl happened in Siena, Tuscany, Italia. The cause of traumatic injuries could be ascribed to suicide, to homicide, or to accident. In absence of eyewitnesses who could testify the dynamics of the event, the crime scene investigation was fundamental to clarify the accident. During the scene analysis, some fragments of Tortula muralis Hedw. and Bryum capillare Hedw were found. The fragments were analyzed by a bryologists in order to compare them with the moss present on the stairs that the victim used immediately before the death. The analysis of these bryophytes found at the crime scene allowed to reconstruct the accident. Even if this evidence, of course, is circumstantial, it can be useful in forensic cases, together with the other evidences, to reconstruct the dynamics of events. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

1 H-NMR with Multivariate Analysis for Automobile Lubricant Comparison.

PubMed

Kim, Siwon; Yoon, Dahye; Lee, Dong-Kye; Yoon, Changshin; Kim, Suhkmann

2017-07-01

Identification of suspected automobile-related lubricants could provide valuable information in forensic cases. We examined that automobile lubricants might exhibit the chemometric characteristics to their individual usages. To compare the degree of clustering in the plots, we co-plotted general industrial oils that were highly dissimilar with automobile lubricants in additive compositions. 1 H-NMR spectroscopy was used with multivariate statistics as a tool for grouping, clustering, and identification of automobile lubricants in laboratory conditions. We analyzed automobile lubricants including automobile engine oils, automobile transmission oils, automobile gear oils, and motorcycle oils. In contrast to the general industrial oils, automobile lubricants showed relatively high tendencies of clustering to their usages. Our pilot study demonstrated that the comparison of known and questioned samples to their usages might be possible in forensic fields. © 2017 American Academy of Forensic Sciences.

Forensic species identification of elephant (Elephantidae) and giraffe (Giraffidae) tail hair using light microscopy.

PubMed

Yates, Bonnie C; Espinoza, Edgard O; Baker, Barry W

2010-09-01

Here we present methods for distinguishing tail hairs of African elephants (Loxodonta africana), Asian elephants (Elephas maximus), and giraffes (Giraffa camelopardalis) from forensic contexts. Such hairs are commonly used to manufacture jewelry artifacts that are often sold illegally in the international wildlife trade. Tail hairs from these three species are easily confused macroscopically, and morphological methods for distinguishing African and Asian tail hairs have not been published. We used cross section analysis and light microscopy to analyze the tail hair morphology of 18 individual African elephants, 18 Asian elephants, and 40 giraffes. We found that cross-sectional shape, pigment placement, and pigment density are useful morphological features for distinguishing the three species. These observations provide wildlife forensic scientists with an important analytical tool for enforcing legislation and international treaties regulating the trade in elephant parts.

[Forensic aspects of gunshot suicides in Germany].

PubMed

Kunz, Sebastian Niko; Meyer, Harald J; Kraus, Sybille

2013-12-01

Suicidal gunshot wounds are a common appearance in forensic casework. The main task of the coroner lies in the detection of typical pathomorphological correlates, thus differentiating between homicide, suicide and accident. Apart from characteristic bloodstain patterns on the gun and shooting hand, the localisation of the entrance wound and the position of the weapon, additional details such as family background or medical history are important aspects of forensic investigation. An uncommon choice of weaponry and its unusual morphological manifestation often complicate the examination and reconstruction of such cases. Furthermore, due to social stigmatisation, the possibility of secondary changes by relatives at the crime scene should be considered. In addition to autopsy findings, a careful crime scene investigation and bloodstain pattern analysis, a ballistic reconstruction can be an essential tool to gain knowledge of the shooting distance and position of the gun.

Psychometric Properties in Forensic Application of the Screening Version of the Psychopathy Checklist.

PubMed

Higgs, Tamsin; Tully, Ruth J; Browne, Kevin D

2018-05-01

The Psychopathy Checklist: Screening Version (PCL: SV) is a short form of the Psychopathy Checklist-Revised (PCL-R), an expert-rated assessment that measures psychopathic personality traits in research, clinical, and community settings. The PCL-R is an extensively relied upon tool in psycho-legal contexts. The screening version is also widely used; however, it has received far less empirical attention than the PCL-R. This review examines the psychometric properties of the PCL: SV, specifically in relation to forensic samples, and evaluates its comparability with the full PCL-R. Previously reported similarity in the reliability and validity of the PCL: SV as established for the PCL-R was supported through further testing in forensic samples. However, limitations in terms of available normative data are highlighted, and the review engages with wider debate concerning the measurement of psychopathy.

Phylogenic analysis and forensic genetic characterization of Chinese Uyghur group via autosomal multi STR markers.

PubMed

Jin, Xiaoye; Wei, Yuanyuan; Chen, Jiangang; Kong, Tingting; Mu, Yuling; Guo, Yuxin; Dong, Qian; Xie, Tong; Meng, Haotian; Zhang, Meng; Li, Jianfei; Li, Xiaopeng; Zhu, Bofeng

2017-09-26

We investigated the allelic frequencies and forensic descriptive parameters of 23 autosomal short tandem repeat loci in a randomly selected sample of 1218 unrelated healthy Uyghur individuals residing in the Xinjiang Uyghur Autonomous Region, northwest China. A total of 281 alleles at these loci were identified and their corresponding allelic frequencies ranged from 0.0004 to 0.5390. The combined match probability and combined probability of exclusion of all loci were 5.192 × 10 -29 and 0.9999999996594, respectively. The results of population genetic study manifested that Uyghur had close relationships with those contiguous populations, such as Xibe and Hui groups. In a word, these autosomal short tandem repeat loci were highly informative in Uyghur group and the multiplex PCR system could be used as a valuable tool for forensic caseworks and population genetic analysis.

Advanced Digital Forensic and Steganalysis Methods

DTIC Science & Technology

2009-02-01

investigation is simultaneously cropped, scaled, and processed, extending the technology when the digital image is printed, developing technology capable ...or other common processing operations). TECNOLOGY APPLICATIONS 1. Determining the origin of digital images 2. Matching an image to a camera...Technology Transfer and Innovation Partnerships Division of Research P.O. Box 6000 State University of New York Binghamton, NY 13902-6000 Phone: 607-777

Illustration and analysis of a coordinated approach to an effective forensic trace evidence capability.

PubMed

Stoney, David A; Stoney, Paul L

2015-08-01

An effective trace evidence capability is defined as one that exploits all useful particle types, chooses appropriate technologies to do so, and directly integrates the findings with case-specific problems. Limitations of current approaches inhibit the attainment of an effective capability and it has been strongly argued that a new approach to trace evidence analysis is essential. A hypothetical case example is presented to illustrate and analyze how forensic particle analysis can be used as a powerful practical tool in forensic investigations. The specifics in this example, including the casework investigation, laboratory analyses, and close professional interactions, provide focal points for subsequent analysis of how this outcome can be achieved. This leads to the specification of five key elements that are deemed necessary and sufficient for effective forensic particle analysis: (1) a dynamic forensic analytical approach, (2) concise and efficient protocols addressing particle combinations, (3) multidisciplinary capabilities of analysis and interpretation, (4) readily accessible external specialist resources, and (5) information integration and communication. A coordinating role, absent in current approaches to trace evidence analysis, is essential to achieving these elements. However, the level of expertise required for the coordinating role is readily attainable. Some additional laboratory protocols are also essential. However, none of these has greater staffing requirements than those routinely met by existing forensic trace evidence practitioners. The major challenges that remain are organizational acceptance, planning and implementation. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

AMULET: A MUlti-cLuE Approach to Image Forensics

DTIC Science & Technology

2014-12-31

celebrities have been substituted in the other two pictures. 3.2.5 Choice of reliability properties Let us now apply the BBA mapping approach proposed in...Jiang, and L. Ma, “Ds evidence theory based digital image trustworthiness evaluation model,” in MINES 2009, International Conference on Multimedia

New developments of X-ray fluorescence imaging techniques in laboratory

NASA Astrophysics Data System (ADS)

Tsuji, Kouichi; Matsuno, Tsuyoshi; Takimoto, Yuki; Yamanashi, Masaki; Kometani, Noritsugu; Sasaki, Yuji C.; Hasegawa, Takeshi; Kato, Shuichi; Yamada, Takashi; Shoji, Takashi; Kawahara, Naoki

2015-11-01

X-ray fluorescence (XRF) analysis is a well-established analytical technique with a long research history. Many applications have been reported in various fields, such as in the environmental, archeological, biological, and forensic sciences as well as in industry. This is because XRF has a unique advantage of being a nondestructive analytical tool with good precision for quantitative analysis. Recent advances in XRF analysis have been realized by the development of new x-ray optics and x-ray detectors. Advanced x-ray focusing optics enables the making of a micro x-ray beam, leading to micro-XRF analysis and XRF imaging. A confocal micro-XRF technique has been applied for the visualization of elemental distributions inside the samples. This technique was applied for liquid samples and for monitoring chemical reactions such as the metal corrosion of steel samples in the NaCl solutions. In addition, a principal component analysis was applied for reducing the background intensity in XRF spectra obtained during XRF mapping, leading to improved spatial resolution of confocal micro-XRF images. In parallel, the authors have proposed a wavelength dispersive XRF (WD-XRF) imaging spectrometer for a fast elemental imaging. A new two dimensional x-ray detector, the Pilatus detector was applied for WD-XRF imaging. Fast XRF imaging in 1 s or even less was demonstrated for Euro coins and industrial samples. In this review paper, these recent advances in laboratory-based XRF imaging, especially in a laboratory setting, will be introduced.

The effect of temperature on development of Sarconesia chlorogaster, a blowfly of forensic importance.

PubMed

Lecheta, Melise Cristine; Thyssen, Patricia Jacqueline; Moura, Mauricio Osvaldo

2015-12-01

The blowfly Sarconesia chlorogaster (Diptera: Calliphoridae) is of limited forensic use in South America, due to the poorly known relationship between development time and temperature. The purpose of this study was to determine development time of S. chlorogaster at different constant temperatures, thereby enabling the forensic use of this fly. Development time of this species was examined by observing larval development at six temperatures (10, 15, 20, 25, 30, 35 °C). The thermal constant (K), the minimum development threshold (t 0), and development rate were calculated using linear regressions of the development time interval at five temperatures (10-30 °C). Development interval from egg to adult varied from 14.2 to 95.2 days, depending on temperature. The t0 calculated for total immature development is 6.33 °C and the overall thermal constant is 355.51 degree-days (DD). Temperature affected the viability of pupae, at 35 °C 100 % mortality was observed. Understanding development rate across these temperatures now makes development of S. chlorogaster a forensically useful tool for estimating postmortem interval.

Forensic applications of infrared imaging for the detection and recording of latent evidence.

PubMed

Lin, Apollo Chun-Yen; Hsieh, Hsing-Mei; Tsai, Li-Chin; Linacre, Adrian; Lee, James Chun-I

2007-09-01

We report on a simple method to record infrared (IR) reflected images in a forensic science context. Light sources using ultraviolet light have been used previously in the detection of latent prints, but the use of infrared light has been subjected to less investigation. IR light sources were used to search for latent evidence and the images were captured by either video or using a digital camera with a CCD array sensitive to IR wavelength. Bloodstains invisible to the eye, inks, tire prints, gunshot residue, and charred document on dark background are selected as typical matters that may be identified during a forensic investigation. All the evidence types could be detected and identified using a range of photographic techniques. In this study, a one in eight times dilution of blood could be detected on 10 different samples of black cloth. When using 81 black writing inks, the observation rates were 95%, 88% and 42% for permanent markers, fountain pens and ball-point pens, respectively, on the three kinds of dark cloth. The black particles of gunshot residue scattering around the entrance hole under IR light were still observed at a distance of 60 cm from three different shooting ranges. A requirement of IR reflectivity is that there is a contrast between the latent evidence and the background. In the absence of this contrast no latent image will be detected, which is similar to all light sources. The use of a video camera allows the recording of images either at a scene or in the laboratory. This report highlights and demonstrates the robustness of IR to detect and record the presence of latent evidence.

Quantifying Morphological Features of α-U3O8 with Image Analysis for Nuclear Forensics.

PubMed

Olsen, Adam M; Richards, Bryony; Schwerdt, Ian; Heffernan, Sean; Lusk, Robert; Smith, Braxton; Jurrus, Elizabeth; Ruggiero, Christy; McDonald, Luther W

2017-03-07

Morphological changes in U 3 O 8 based on calcination temperature have been quantified enabling a morphological feature to serve as a signature of processing history in nuclear forensics. Five separate calcination temperatures were used to synthesize α-U 3 O 8 , and each sample was characterized using powder X-ray diffraction (p-XRD) and scanning electron microscopy (SEM). The p-XRD spectra were used to evaluate the purity of the synthesized U-oxide; the morphological analysis for materials (MAMA) software was utilized to quantitatively characterize the particle shape and size as indicated by the SEM images. Analysis comparing the particle attributes, such as particle area at each of the temperatures, was completed using the Kolmogorov-Smirnov two sample test (K-S test). These results illustrate a distinct statistical difference between each calcination temperature. To provide a framework for forensic analysis of an unknown sample, the sample distributions at each temperature were compared to randomly selected distributions (100, 250, 500, and 750 particles) from each synthesized temperature to determine if they were statistically different. It was found that 750 particles were required to differentiate between all of the synthesized temperatures with a confidence interval of 99.0%. Results from this study provide the first quantitative morphological study of U-oxides, and reveals the potential strength of morphological particle analysis in nuclear forensics by providing a framework for a more rapid characterization of interdicted uranium oxide samples.

Feature reduction and payload location with WAM steganalysis

NASA Astrophysics Data System (ADS)

Ker, Andrew D.; Lubenko, Ivans

2009-02-01

WAM steganalysis is a feature-based classifier for detecting LSB matching steganography, presented in 2006 by Goljan et al. and demonstrated to be sensitive even to small payloads. This paper makes three contributions to the development of the WAM method. First, we benchmark some variants of WAM in a number of sets of cover images, and we are able to quantify the significance of differences in results between different machine learning algorithms based on WAM features. It turns out that, like many of its competitors, WAM is not effective in certain types of cover, and furthermore it is hard to predict which types of cover are suitable for WAM steganalysis. Second, we demonstrate that only a few the features used in WAM steganalysis do almost all of the work, so that a simplified WAM steganalyser can be constructed in exchange for a little less detection power. Finally, we demonstrate how the WAM method can be extended to provide forensic tools to identify the location (and potentially content) of LSB matching payload, given a number of stego images with payload placed in the same locations. Although easily evaded, this is a plausible situation if the same stego key is mistakenly re-used for embedding in multiple images.

Images Revealing More Than a Thousand Words

NASA Technical Reports Server (NTRS)

2003-01-01

A unique sensor developed by ProVision Technologies, a NASA Commercial Space Center housed by the Institute for Technology Development, produces hyperspectral images with cutting-edge applications in food safety, skin health, forensics, and anti-terrorism activities. While hyperspectral imaging technology continues to make advances with ProVision Technologies, it has also been transferred to the commercial sector through a spinoff company, Photon Industries, Inc.

Nanoparticles in forensic science

NASA Astrophysics Data System (ADS)

Cantu, Antonio A.

2008-10-01

Nanoparticles appear in several areas of forensic science including security documents, paints, inks, and reagents that develop latent prints. One reagent (known as the silver physical developer) that visualizes the water insoluble components of latent print residue is based on the formation of highly charged silver nanoparticles. These attach to and grow on the residue and generate a silver image. Another such reagent involves highly charged gold nanoparticles. These attach to the residue forming a weak gold image which can be amplified with a silver physical developer. Nanoparaticles are also used in items such as paints, printing inks, and writing inks. Paints and most printing inks consist of nano-sized pigments in a vehicle. However, certain modern ink jet printing inks now contain nano-sized pigments to improve their light fastness and most gel inks are also based on nano scale pigments. These nanoparticlecontaining materials often appear as evidence and are thus subject to forensic characterization. Both luminescent (quantum dots), up-converting nano scale phosphors, and non luminescent nanoparticles are used as security tags to label product, add security to documents, and as anti counterfeiting measures. These assist in determining if an item is fraudulently made.

A potential new diagnostic tool to aid DNA analysis from heat compromised bone using colorimetry: A preliminary study.

PubMed

Fredericks, Jamie D; Ringrose, Trevor J; Dicken, Anthony; Williams, Anna; Bennett, Phil

2015-03-01

Extracting viable DNA from many forensic sample types can be very challenging, as environmental conditions may be far from optimal with regard to DNA preservation. Consequently, skeletal tissue can often be an invaluable source of DNA. The bone matrix provides a hardened material that encapsulates DNA, acting as a barrier to environmental insults that would otherwise be detrimental to its integrity. However, like all forensic samples, DNA in bone can still become degraded in extreme conditions, such as intense heat. Extracting DNA from bone can be laborious and time-consuming. Thus, a lot of time and money can be wasted processing samples that do not ultimately yield viable DNA. We describe the use of colorimetry as a novel diagnostic tool that can assist DNA analysis from heat-treated bone. This study focuses on characterizing changes in the material and physical properties of heated bone, and their correlation with digitally measured color variation. The results demonstrate that the color of bone, which serves as an indicator of the chemical processes that have occurred, can be correlated with the success or failure of subsequent DNA amplification. Copyright © 2014 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

Detection of glass particles on bone lesions using SEM-EDS.

PubMed

Montoriol, Romain; Guilbeau-Frugier, Céline; Chantalat, Elodie; Roumiguié, Mathieu; Delisle, Marie-Bernadette; Payré, Bruno; Telmon, Norbert; Savall, Frédéric

2017-09-01

The problem of identifying the wounding agent in forensic cases is recurrent. Moreover, when several tools are involved, distinguishing the origin of lesions can be difficult. Scanning electron microscopy (SEM)/energy dispersive X-ray analysis (EDS) equipment is increasingly available to the scientific and medical community, and some studies have reported its use in forensic anthropology. However, at our knowledge, no study has reported the use of SEM-EDS in forensic cases involving glass tools, whether in case reports or experiments. We performed an experimental study on human rib fragments, on which we manually created wounds using fragments of window and mirror glass. SEM-EDS was executed on samples without any further preparation on low vacuum mode, then on the same samples after defleshing them completely by boiling them. Window and mirror glass particles were detected on experimental wounds. Both had silica in their spectra, and the opaque side of the mirror contained titanium, allowing for their identification. Boiling and defleshing the bone samples involved a loss of information in terms of the number of wounds detected as positive for glass particles and in the number of glass particles detected, for both window and mirror glass. We suggest the analysis of wounds with suspected glass particles using low vacuum mode and with no defleshment by boiling.

Identifying transfer mechanisms and sources of decabromodiphenyl ether (BDE 209) in indoor environments using environmental forensic microscopy

PubMed Central

Webster, Thomas F.; Harrad, Stuart; Millette, James R.; Holbrook, R. David; Davis, Jeffrey M.; Stapleton, Heather M.; Allen, Joseph G.; McClean, Michael D.; Ibarra, Catalina; Abdallah, Mohamed Abou-Elwafa; Covaci, Adrian

2009-01-01

Although the presence of polybrominated diphenyl ethers (PBDEs) in house dust has been linked to consumer products, the mechanism of transfer remains poorly understood. We conjecture that volatilized PBDEs will be associated with dust particles containing organic matter and will be homogeneously distributed in house dust. In contrast, PBDEs arising from weathering or abrasion of polymers should remain bound to particles of the original polymer matrix and will be heterogeneously distributed within the dust. We used scanning electron microscopy and other tools of environmental forensic microscopy to investigate PBDEs in dust, examining U.S.A. and U.K. dust samples with extremely high levels of BDE 209 (260–2600 µg/g), a non-volatile compound at room temperature. We found that the bromine in these samples was concentrated in widely scattered, highly contaminated particles. In the house dust samples from Boston (U.S.), bromine was associated with a polymer/organic matrix. These results suggest that the BDE 209 was transferred to dust via physical processes such as abrasion or weathering. In conjunction with more traditional tools of environmental chemistry, such as gas chromatography-mass spectrometry (GC/MS), environmental forensic microscopy provides novel insights into the origins of BDE 209 in dust and their mechanisms of transfer from products. PMID:19534115

The macromorphoscopic databank.

PubMed

Hefner, Joseph T

2018-04-20

The development of identification standards in forensic anthropology requires large and appropriate reference samples comprising individuals with modern birth years. Recent advances in macromorphoscopic trait data collection and analysis have created a need for reference data for classification models and biological distance analyses. The Macromorphoscopic Databank (N ∼ 7,397) serves that function, making publicly available trait scores for a large sample (n = 2,363) of modern American populations and world-wide groups of various geographic origins (n = 1,790). In addition, the MaMD stores reference data for a large sample (n = 3,244) of pre-, proto- and historic Amerindian data, useful for biodistance studies and finer-levels of analysis during NAGPRA-related investigations and repatriations. In developing this database, particular attention was given to the level of classification needed during the estimation of ancestry in a forensic context. To fill the knowledge gap that currently exists in the analysis of these data, the following overview outlines many of the issues and their potential solutions. Developing valuable tools that are useful to other practitioners is the purpose of growing a databank. As the Macromorphoscopic Databank develops through data collection efforts and contributions from the field, its utility as a research and teaching tool will also mature, in turn creating a vital resource for forensic anthropologists for future generations. © 2018 Wiley Periodicals, Inc.

The Oregon Health and Science University-Oregon State Hospital Collaboration: Reflections on an Evolving Public-Academic Partnership.

PubMed

Chien, Joseph; Novosad, David; Mobbs, Karl E

2016-03-01

This column describes the conceptualization and implementation of an innovative collaboration between Oregon State Hospital and Oregon Health and Science University that was created to address understaffing and improve the quality of care. The hospital created a forensic evaluation rotation to address the growing population of forensic patients, which created a valuable recruiting tool for the hospital. One of the authors, a recent recruit, provides a first-person account of his experience working within the collaboration. The model could be emulated by other public-sector facilities facing similar challenges with psychiatrist recruitment and retention.

Searching for biological traces on different materials using a forensic light source and infrared photography.

PubMed

Sterzik, V; Panzer, S; Apfelbacher, M; Bohnert, M

2016-05-01

Because biological traces often play an important role in the investigation process of criminal acts, their detection is essential. As they are not always visible to the human eye, tools like a forensic light source or infrared photography can be used. The intention of the study presented was to give advice how to visualize biological traces best. Which wavelengths and/or filters give the best results for different traces on different fabrics of different colors? Therefore, blood (undiluted and diluted), semen, urine, saliva, and perspiration have been examined on 29 different materials.

Multiple Representations-Based Face Sketch-Photo Synthesis.

PubMed

Peng, Chunlei; Gao, Xinbo; Wang, Nannan; Tao, Dacheng; Li, Xuelong; Li, Jie

2016-11-01

Face sketch-photo synthesis plays an important role in law enforcement and digital entertainment. Most of the existing methods only use pixel intensities as the feature. Since face images can be described using features from multiple aspects, this paper presents a novel multiple representations-based face sketch-photo-synthesis method that adaptively combines multiple representations to represent an image patch. In particular, it combines multiple features from face images processed using multiple filters and deploys Markov networks to exploit the interacting relationships between the neighboring image patches. The proposed framework could be solved using an alternating optimization strategy and it normally converges in only five outer iterations in the experiments. Our experimental results on the Chinese University of Hong Kong (CUHK) face sketch database, celebrity photos, CUHK Face Sketch FERET Database, IIIT-D Viewed Sketch Database, and forensic sketches demonstrate the effectiveness of our method for face sketch-photo synthesis. In addition, cross-database and database-dependent style-synthesis evaluations demonstrate the generalizability of this novel method and suggest promising solutions for face identification in forensic science.

Advancing crime scene computer forensics techniques

NASA Astrophysics Data System (ADS)

Hosmer, Chet; Feldman, John; Giordano, Joe

1999-02-01

Computers and network technology have become inexpensive and powerful tools that can be applied to a wide range of criminal activity. Computers have changed the world's view of evidence because computers are used more and more as tools in committing `traditional crimes' such as embezzlements, thefts, extortion and murder. This paper will focus on reviewing the current state-of-the-art of the data recovery and evidence construction tools used in both the field and laboratory for prosection purposes.

Forensic surface metrology: tool mark evidence.

PubMed

Gambino, Carol; McLaughlin, Patrick; Kuo, Loretta; Kammerman, Frani; Shenkin, Peter; Diaczuk, Peter; Petraco, Nicholas; Hamby, James; Petraco, Nicholas D K

2011-01-01

Over the last several decades, forensic examiners of impression evidence have come under scrutiny in the courtroom due to analysis methods that rely heavily on subjective morphological comparisons. Currently, there is no universally accepted system that generates numerical data to independently corroborate visual comparisons. Our research attempts to develop such a system for tool mark evidence, proposing a methodology that objectively evaluates the association of striated tool marks with the tools that generated them. In our study, 58 primer shear marks on 9 mm cartridge cases, fired from four Glock model 19 pistols, were collected using high-resolution white light confocal microscopy. The resulting three-dimensional surface topographies were filtered to extract all "waviness surfaces"-the essential "line" information that firearm and tool mark examiners view under a microscope. Extracted waviness profiles were processed with principal component analysis (PCA) for dimension reduction. Support vector machines (SVM) were used to make the profile-gun associations, and conformal prediction theory (CPT) for establishing confidence levels. At the 95% confidence level, CPT coupled with PCA-SVM yielded an empirical error rate of 3.5%. Complementary, bootstrap-based computations for estimated error rates were 0%, indicating that the error rate for the algorithmic procedure is likely to remain low on larger data sets. Finally, suggestions are made for practical courtroom application of CPT for assigning levels of confidence to SVM identifications of tool marks recorded with confocal microscopy. Copyright © 2011 Wiley Periodicals, Inc.

Phylogenic analysis and forensic genetic characterization of Chinese Uyghur group via autosomal multi STR markers

PubMed Central

Jin, Xiaoye; Wei, Yuanyuan; Chen, Jiangang; Kong, Tingting; Mu, Yuling; Guo, Yuxin; Dong, Qian; Xie, Tong; Meng, Haotian; Zhang, Meng; Li, Jianfei; Li, Xiaopeng; Zhu, Bofeng

2017-01-01

We investigated the allelic frequencies and forensic descriptive parameters of 23 autosomal short tandem repeat loci in a randomly selected sample of 1218 unrelated healthy Uyghur individuals residing in the Xinjiang Uyghur Autonomous Region, northwest China. A total of 281 alleles at these loci were identified and their corresponding allelic frequencies ranged from 0.0004 to 0.5390. The combined match probability and combined probability of exclusion of all loci were 5.192 × 10−29 and 0.9999999996594, respectively. The results of population genetic study manifested that Uyghur had close relationships with those contiguous populations, such as Xibe and Hui groups. In a word, these autosomal short tandem repeat loci were highly informative in Uyghur group and the multiplex PCR system could be used as a valuable tool for forensic caseworks and population genetic analysis. PMID:29088750

DNA-based identification of forensically important species of Sarcophagidae (Insecta: Diptera) from Rio de Janeiro, Brazil.

PubMed

Napoleão, K S; Mello-Patiu, C A; Oliveira-Costa, J; Takiya, D M; Silva, R; Moura-Neto, R S

2016-05-06

Sarcophagidae, or flesh flies, are of great importance in forensic entomology, but their effective application requires precise taxonomic identification, which relies almost exclusively on characteristics of the male genitalia. Given that female flies and larvae are most abundant in animal carcasses or on corpses, precise morphological identification can be difficult; therefore, DNA sequencing can be an additional tool for use in taxonomic identification. This paper analyzes part of the mitochondrial cytochrome c oxidase subunit I (COI) gene from three Sarcophagidae species of forensic importance in the City of Rio de Janeiro: Oxysarcodexia fluminensis, Peckia chrysostoma, and Peckia intermutans. COI fragments of 400 bp from 36 specimens of these three species were sequenced. No intraspecific differences were found among specimens of O. fluminensis, but P. chrysostoma and P. intermutans each had two haplotypes, ranging from 0 to 0.7%. The interspecific divergence was 8.5-11.6%, corroborating previously reported findings.

Interpretation guidelines of a standard Y-chromosome STR 17-plex PCR-CE assay for crime casework.

PubMed

Roewer, Lutz; Geppert, Maria

2012-01-01

Y-STR analysis is an invaluable tool to examine evidence in sexual assault cases and in other forensic casework. Unambiguous detection of the male component in DNA mixtures with a high female background is still the main field of application of forensic Y-STR haplotyping. In the last years, powerful technologies including a 17-locus multiplex PCR assay have been introduced in the forensic laboratories. At the same time, statistical methods have been developed and adapted for interpretation of a nonrecombining, linear marker as the Y-chromosome which shows a strongly clustered geographical distribution due to the linear inheritance and the patrilocality of ancestral groups. Large population databases, namely the Y-STR Haplotype Reference Database (YHRD), have been established to assess the evidentiary value of Y-STR matches by means of frequency estimation methods (counting and extrapolation).

A statistical approach based on accumulated degree-days to predict decomposition-related processes in forensic studies.

PubMed

Michaud, Jean-Philippe; Moreau, Gaétan

2011-01-01

Using pig carcasses exposed over 3 years in rural fields during spring, summer, and fall, we studied the relationship between decomposition stages and degree-day accumulation (i) to verify the predictability of the decomposition stages used in forensic entomology to document carcass decomposition and (ii) to build a degree-day accumulation model applicable to various decomposition-related processes. Results indicate that the decomposition stages can be predicted with accuracy from temperature records and that a reliable degree-day index can be developed to study decomposition-related processes. The development of degree-day indices opens new doors for researchers and allows for the application of inferential tools unaffected by climatic variability, as well as for the inclusion of statistics in a science that is primarily descriptive and in need of validation methods in courtroom proceedings. © 2010 American Academy of Forensic Sciences.

Blurriness in Live Forensics: An Introduction

NASA Astrophysics Data System (ADS)

Savoldi, Antonio; Gubian, Paolo

The Live Forensics discipline aims at answering basic questions related to a digital crime, which usually involves a computer-based system. The investigation should be carried out with the very goal to establish which processes were running, when they were started and by whom, what specific activities those processes were doing and the state of active network connections. Besides, a set of tools needs to be launched on the running system by altering, as a consequence of the Locard’s exchange principle [2], the system’s memory. All the methodologies for the live forensics field proposed until now have a basic, albeit important, weakness, which is the inability to quantify the perturbation, or blurriness, of the system’s memory of the investigated computer. This is the very last goal of this paper: to provide a set of guidelines which can be effectively used for measuring the uncertainty of the collected volatile memory on a live system being investigated.

A Tool for Forensic Science.

ERIC Educational Resources Information Center

Berry, Keith O.

1986-01-01

Discusses some contributions chemists can make in the investigation of crime. Describes the optical properties of materials and defines the refractive index. Explains the refractive indices for liquids and for solids, and provides laboratory exercises for determining both. (TW)

External validity and anchoring heuristics: application of DUNDRUM-1 to secure service gatekeeping in South Wales.

PubMed

Lawrence, Daniel; Davies, Tracey-Lee; Bagshaw, Ruth; Hewlett, Paul; Taylor, Pamela; Watt, Andrew

2018-02-01

Aims and method Structured clinical judgement tools provide scope for the standardisation of forensic service gatekeeping and also allow identification of heuristics in this decision process. The DUNDRUM-1 triage tool was completed retrospectively for 121 first-time referrals to forensic services in South Wales. Fifty were admitted to medium security, 49 to low security and 22 remained in open conditions. DUNDRUM-1 total scores differed appropriately between different levels of security. However, regression revealed heuristic anchoring on the 'legal process' and 'immediacy of risk due to mental disorder' items. Clinical implications Patient placement was broadly aligned with DUNDRUM-1 recommendations. However, not all triage items informed gatekeeping decisions. It remains to be seen whether decisions anchored in this way are effective. Declaration of interest Dr Mark Freestone gave permission for AUC values from Freestone et al. (2015) to be presented here for comparison.

Identification of forensic samples by using an infrared-based automatic DNA sequencer.

PubMed

Ricci, Ugo; Sani, Ilaria; Klintschar, Michael; Cerri, Nicoletta; De Ferrari, Francesco; Giovannucci Uzielli, Maria Luisa

2003-06-01

We have recently introduced a new protocol for analyzing all core loci of the Federal Bureau of Investigation's (FBI) Combined DNA Index System (CODIS) with an infrared (IR) automatic DNA sequencer (LI-COR 4200). The amplicons were labeled with forward oligonucleotide primers, covalently linked to a new infrared fluorescent molecule (IRDye 800). The alleles were displayed as familiar autoradiogram-like images with real-time detection. This protocol was employed for paternity testing, population studies, and identification of degraded forensic samples. We extensively analyzed some simulated forensic samples and mixed stains (blood, semen, saliva, bones, and fixed archival embedded tissues), comparing the results with donor samples. Sensitivity studies were also performed for the four multiplex systems. Our results show the efficiency, reliability, and accuracy of the IR system for the analysis of forensic samples. We also compared the efficiency of the multiplex protocol with ultraviolet (UV) technology. Paternity tests, undegraded DNA samples, and real forensic samples were analyzed with this approach based on IR technology and with UV-based automatic sequencers in combination with commercially-available kits. The comparability of the results with the widespread UV methods suggests that it is possible to exchange data between laboratories using the same core group of markers but different primer sets and detection methods.

A review of sex estimation techniques during examination of skeletal remains in forensic anthropology casework.

PubMed

Krishan, Kewal; Chatterjee, Preetika M; Kanchan, Tanuj; Kaur, Sandeep; Baryah, Neha; Singh, R K

2016-04-01

Sex estimation is considered as one of the essential parameters in forensic anthropology casework, and requires foremost consideration in the examination of skeletal remains. Forensic anthropologists frequently employ morphologic and metric methods for sex estimation of human remains. These methods are still very imperative in identification process in spite of the advent and accomplishment of molecular techniques. A constant boost in the use of imaging techniques in forensic anthropology research has facilitated to derive as well as revise the available population data. These methods however, are less reliable owing to high variance and indistinct landmark details. The present review discusses the reliability and reproducibility of various analytical approaches; morphological, metric, molecular and radiographic methods in sex estimation of skeletal remains. Numerous studies have shown a higher reliability and reproducibility of measurements taken directly on the bones and hence, such direct methods of sex estimation are considered to be more reliable than the other methods. Geometric morphometric (GM) method and Diagnose Sexuelle Probabiliste (DSP) method are emerging as valid methods and widely used techniques in forensic anthropology in terms of accuracy and reliability. Besides, the newer 3D methods are shown to exhibit specific sexual dimorphism patterns not readily revealed by traditional methods. Development of newer and better methodologies for sex estimation as well as re-evaluation of the existing ones will continue in the endeavour of forensic researchers for more accurate results. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Comparison of algorithms for blood stain detection applied to forensic hyperspectral imagery

NASA Astrophysics Data System (ADS)

Yang, Jie; Messinger, David W.; Mathew, Jobin J.; Dube, Roger R.

2016-05-01

Blood stains are among the most important types of evidence for forensic investigation. They contain valuable DNA information, and the pattern of the stains can suggest specifics about the nature of the violence that transpired at the scene. Early detection of blood stains is particularly important since the blood reacts physically and chemically with air and materials over time. Accurate identification of blood remnants, including regions that might have been intentionally cleaned, is an important aspect of forensic investigation. Hyperspectral imaging might be a potential method to detect blood stains because it is non-contact and provides substantial spectral information that can be used to identify regions in a scene with trace amounts of blood. The potential complexity of scenes in which such vast violence occurs can be high when the range of scene material types and conditions containing blood stains at a crime scene are considered. Some stains are hard to detect by the unaided eye, especially if a conscious effort to clean the scene has occurred (we refer to these as "latent" blood stains). In this paper we present the initial results of a study of the use of hyperspectral imaging algorithms for blood detection in complex scenes. We describe a hyperspectral imaging system which generates images covering 400 nm - 700 nm visible range with a spectral resolution of 10 nm. Three image sets of 31 wavelength bands were generated using this camera for a simulated indoor crime scene in which blood stains were placed on a T-shirt and walls. To detect blood stains in the scene, Principal Component Analysis (PCA), Subspace Reed Xiaoli Detection (SRXD), and Topological Anomaly Detection (TAD) algorithms were used. Comparison of the three hyperspectral image analysis techniques shows that TAD is most suitable for detecting blood stains and discovering latent blood stains.

Cardiac Implantable Electronic Device Interrogation at Forensic Autopsy: An Underestimated Resource?

PubMed

Lacour, Philipp; Buschmann, Claas; Storm, Christian; Nee, Jens; Parwani, Abdul Shokor; Huemer, Martin; Attanasio, Philipp; Boldt, Leif-Hendrik; Rauch, Geraldine; Kucher, Andreas; Pieske, Burkert; Haverkamp, Wilhelm; Blaschke, Florian

2018-06-19

Postmortem interrogations of cardiac implantable electronic devices (CIEDs), recommended at autopsy in suspected cases of sudden cardiac death, are rarely performed, and data on systematic postmortem CIED analysis in the forensic pathology are missing. The aim of the study was to determine whether nonselective postmortem CIED interrogations and data analysis are useful to the forensic pathologist to determine the cause, mechanism, and time of death and to detect potential CIED-related safety issues. From February 2012 to April 2017, all autopsy subjects in the department of forensic medicine at the University Hospital Charité who had a CIED underwent device removal and interrogation. Over the study period, 5368 autopsies were performed. One hundred fifty subjects had in total 151 CIEDs, including 109 pacemakers, 35 defibrillators, and 7 implantable loop recorders. In 40 cases (26.7%) time of death and in 51 cases (34.0%) cause of death could not be determined by forensic autopsy. Of these, CIED interrogation facilitated the determination of time of death in 70.0% of the cases and clarified the cause of death in 60.8%. Device concerns were identified in 9 cases (6.0%), including 3 hardware, 4 programming, and 2 algorithm issues. One CIED was submitted to the manufacturer for a detailed technical analysis. Our data demonstrate the necessity of systematic postmortem CIED interrogation in forensic medicine to determine the cause and timing of death more accurately. In addition, CIED analysis is an important tool to detect potential CIED-related safety issues. © 2018 American Heart Association, Inc.

An assessment of scientific and technical aspects of closed investigations of canine forensics DNA – case series from the University of California, Davis, USA

PubMed Central

Scharnhorst, Günther; Kanthaswamy, Sree

2011-01-01

Aim To describe and assess the scientific and technical aspects of animal forensic testing at the University of California, Davis. The findings and recommendations contained in this report are designed to assess the past, evaluate the present, and recommend reforms that will assist the animal forensic science community in providing the best possible services that comply with court standards and bear judicial scrutiny. Methods A batch of 32 closed files of domestic dog DNA cases processed at the University of California, Davis, between August 2003 and July 2005 were reviewed in this study. The case files comprised copies of all original paperwork, copies of the cover letter or final report, laboratory notes, notes on analyses, submission forms, internal chains of custody, printed images and photocopies of evidence, as well as the administrative and technical reviews of those cases. Results While the fundamental aspects of animal DNA testing may be reliable and acceptable, the scientific basis for forensic testing animal DNA needs to be improved substantially. In addition to a lack of standardized and validated genetic testing protocols, improvements are needed in a wide range of topics including quality assurance and quality control measures, sample handling, evidence testing, statistical analysis, and reporting. Conclusion This review implies that although a standardized panel of short tandem repeat and mitochondrial DNA markers and publicly accessible genetic databases for canine forensic DNA analysis are already available, the persistent lack of supporting resources, including standardized quality assurance and quality control programs, still plagues the animal forensic community. This report focuses on closed cases from the period 2003-2005, but extends its scope more widely to include other animal DNA forensic testing services. PMID:21674824

An assessment of scientific and technical aspects of closed investigations of canine forensics DNA--case series from the University of California, Davis, USA.

PubMed

Scharnhorst, Günther; Kanthaswamy, Sree

2011-06-01

To describe and assess the scientific and technical aspects of animal forensic testing at the University of California, Davis. The findings and recommendations contained in this report are designed to assess the past, evaluate the present, and recommend reforms that will assist the animal forensic science community in providing the best possible services that comply with court standards and bear judicial scrutiny. A batch of 32 closed files of domestic dog DNA cases processed at the University of California, Davis, between August 2003 and July 2005 were reviewed in this study. The case files comprised copies of all original paperwork, copies of the cover letter or final report, laboratory notes, notes on analyses, submission forms, internal chains of custody, printed images and photocopies of evidence, as well as the administrative and technical reviews of those cases. While the fundamental aspects of animal DNA testing may be reliable and acceptable, the scientific basis for forensic testing animal DNA needs to be improved substantially. In addition to a lack of standardized and validated genetic testing protocols, improvements are needed in a wide range of topics including quality assurance and quality control measures, sample handling, evidence testing, statistical analysis, and reporting. This review implies that although a standardized panel of short tandem repeat and mitochondrial DNA markers and publicly accessible genetic databases for canine forensic DNA analysis are already available, the persistent lack of supporting resources, including standardized quality assurance and quality control programs, still plagues the animal forensic community. This report focuses on closed cases from the period 2003-2005, but extends its scope more widely to include other animal DNA forensic testing services.

Matching tire tracks on the head using forensic photogrammetry.

PubMed

Thali, M J; Braun, M; Brüschweiler, W; Dirnhofer, R

2000-09-11

In the field of the documentation of forensics-relevant injuries, from the reconstructive point of view, the forensic, CAD-supported photogrammetry plays an important role; particularly so when a detailed 3-D reconstruction is vital. This is demonstrated with a soft-tissue injury to the face caused by being run over by a car tire. Since the objects (injury and surface of the tire) to be investigated will be evaluated in virtual space, they must be series photographed. These photo sequences are then evaluated with the RolleiMetric multi-image evaluation system. This system measures and calculates the spatial location of points shown in the photo sequences, and creates 3-D data models of the objects. In a 3-D CAD program, the model of the injury is then compared against the model of the possible injury-causing instrument. The validation of the forensic, CAD-supported photogrammetry, as shown by the perfect 3-D match between the tire tread and the facial injury, demonstrates how greatly this 3-D method surpasses the classic 2-D overlay method (one-to-one photography).

State of the art in bile analysis in forensic toxicology.

PubMed

Bévalot, F; Cartiser, N; Bottinelli, C; Guitton, J; Fanton, L

2016-02-01

In forensic toxicology, alternative matrices to blood are useful in case of limited, unavailable or unusable blood sample, suspected postmortem redistribution or long drug intake-to-sampling interval. The present article provides an update on the state of knowledge for the use of bile in forensic toxicology, through a review of the Medline literature from 1970 to May 2015. Bile physiology and technical aspects of analysis (sampling, storage, sample preparation and analytical methods) are reported, to highlight specificities and consequences from an analytical and interpretative point of view. A table summarizes cause of death and quantification in bile and blood of 133 compounds from more than 200 case reports, providing a useful tool for forensic physicians and toxicologists involved in interpreting bile analysis. Qualitative and quantitative interpretation is discussed. As bile/blood concentration ratios are high for numerous molecules or metabolites, bile is a matrix of choice for screening when blood concentrations are low or non-detectable: e.g., cases of weak exposure or long intake-to-death interval. Quantitative applications have been little investigated, but small molecules with low bile/blood concentration ratios seem to be good candidates for quantitative bile-based interpretation. Further experimental data on the mechanism and properties of biliary extraction of xenobiotics of forensic interest are required to improve quantitative interpretation. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Which sexual abuse victims receive a forensic medical examination? The impact of Children's Advocacy Centers.

PubMed

Walsh, Wendy A; Cross, Theodore P; Jones, Lisa M; Simone, Monique; Kolko, David J

2007-10-01

This study examines the impact of Children's Advocacy Centers (CAC) and other factors, such as the child's age, alleged penetration, and injury on the use of forensic medical examinations as part of the response to reported child sexual abuse. This analysis is part of a quasi-experimental study, the Multi-Site Evaluation of Children's Advocacy Centers, which evaluated four CACs relative to within-state non-CAC comparison communities. Case abstractors collected data on forensic medical exams in 1,220 child sexual abuse cases through review of case records. Suspected sexual abuse victims at CACs were two times more likely to have forensic medical examinations than those seen at comparison communities, controlling for other variables. Girls, children with reported penetration, victims who were physically injured while being abused, White victims, and younger children were more likely to have exams, controlling for other variables. Non-penetration cases at CACs were four times more likely to receive exams as compared to those in comparison communities. About half of exams were conducted the same day as the reported abuse in both CAC and comparison communities. The majority of caregivers were very satisfied with the medical professional. Receipt of a medical exam was not associated with offenders being charged. Results of this study suggest that CACs are an effective tool for furthering access to forensic medical examinations for child sexual abuse victims.

Hybrid approach combining chemometrics and likelihood ratio framework for reporting the evidential value of spectra.

PubMed

Martyna, Agnieszka; Zadora, Grzegorz; Neocleous, Tereza; Michalska, Aleksandra; Dean, Nema

2016-08-10

Many chemometric tools are invaluable and have proven effective in data mining and substantial dimensionality reduction of highly multivariate data. This becomes vital for interpreting various physicochemical data due to rapid development of advanced analytical techniques, delivering much information in a single measurement run. This concerns especially spectra, which are frequently used as the subject of comparative analysis in e.g. forensic sciences. In the presented study the microtraces collected from the scenarios of hit-and-run accidents were analysed. Plastic containers and automotive plastics (e.g. bumpers, headlamp lenses) were subjected to Fourier transform infrared spectrometry and car paints were analysed using Raman spectroscopy. In the forensic context analytical results must be interpreted and reported according to the standards of the interpretation schemes acknowledged in forensic sciences using the likelihood ratio approach. However, for proper construction of LR models for highly multivariate data, such as spectra, chemometric tools must be employed for substantial data compression. Conversion from classical feature representation to distance representation was proposed for revealing hidden data peculiarities and linear discriminant analysis was further applied for minimising the within-sample variability while maximising the between-sample variability. Both techniques enabled substantial reduction of data dimensionality. Univariate and multivariate likelihood ratio models were proposed for such data. It was shown that the combination of chemometric tools and the likelihood ratio approach is capable of solving the comparison problem of highly multivariate and correlated data after proper extraction of the most relevant features and variance information hidden in the data structure. Copyright © 2016 Elsevier B.V. All rights reserved.

MAMA User Guide v2.0.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaschen, Brian Keith; Bloch, Jeffrey Joseph; Porter, Reid

Morphological signatures of bulk SNM materials have significant promise, but these potential signatures are not fully utilized. This document describes software tools, collectively called the MAMA (Morphological Analysis for Material Attribution) software that can help provide robust and accurate quantification of morphological features in bulk material microscopy images (Optical, SEM). Although many of the specific tools are not unique to Mama, the software package has been designed specifically for nuclear material morphological analysis, and is at a point where it can be easily adapted (by Los Alamos or by collaborators) in response to new, different, or changing forensics needs. Themore » current release of the MAMA software only includes the image quantification, descriptions, and annotation functionality. Only limited information on a sample, its pedigree, and its chemistry are recorded inside this part of the software. This was decision based on initial feedback and the fact that there are several analytical chemistry databases being developed within the community. Currently MAMA is a standalone program that can export quantification results in a basic text format that can be imported into other programs such as Excel and Access. There is also a basic report generating feature that produces HTML formatted pages of the same information. We will be working with collaborators to provide better integration of MAMA into their particular systems, databases and workflows.« less

Constructing and Classifying Email Networks from Raw Forensic Images

DTIC Science & Technology

2016-09-01

data mining for sequence and pattern mining ; in medical imaging for image segmentation; and in computer vision for object recognition” [28]. 2.3.1...machine learning and data mining suite that is written in Python. It provides a platform for experiment selection, recommendation systems, and...predictivemod- eling. The Orange library is a hierarchically-organized toolbox of data mining components. Data filtering and probability assessment are at the

Document authentication at molecular levels using desorption atmospheric pressure chemical ionization mass spectrometry imaging.

PubMed

Li, Ming; Jia, Bin; Ding, Liying; Hong, Feng; Ouyang, Yongzhong; Chen, Rui; Zhou, Shumin; Chen, Huanwen; Fang, Xiang

2013-09-01

Molecular images of documents were obtained by sequentially scanning the surface of the document using desorption atmospheric pressure chemical ionization mass spectrometry (DAPCI-MS), which was operated in either a gasless, solvent-free or methanol vapor-assisted mode. The decay process of the ink used for handwriting was monitored by following the signal intensities recorded by DAPCI-MS. Handwritings made using four types of inks on four kinds of paper surfaces were tested. By studying the dynamic decay of the inks, DAPCI-MS imaging differentiated a 10-min old from two 4 h old samples. Non-destructive forensic analysis of forged signatures either handwritten or computer-assisted was achieved according to the difference of the contour in DAPCI images, which was attributed to the strength personalized by different writers. Distinction of the order of writing/stamping on documents and detection of illegal printings were accomplished with a spatial resolution of about 140 µm. A Matlab® written program was developed to facilitate the visualization of the similarity between signature images obtained by DAPCI-MS. The experimental results show that DAPCI-MS imaging provides rich information at the molecular level and thus can be used for the reliable document analysis in forensic applications. © 2013 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons, Ltd.

The role of 3DCT for the evaluation of chop injuries in clinical forensic medicine.

PubMed

Wittschieber, Daniel; Beck, Laura; Vieth, Volker; Hahnemann, Maria L

2016-09-01

As hatchet blows to the human head frequently cause fatal injuries, the forensic examination of survivors with cranial chop injuries is a rare phenomenon in forensic casework. Besides evaluation of clinical records, photographs, and medico-legal physical examination, the analysis and 3-dimensional reconstruction of pre-treatment computed tomography data (3DCT) must be considered an important and indispensable tool for the assessment of those cases because the characteristics of chopping trauma often appear masked or changed by clinical treatment. In the present article, the role of 3DCT for the evaluation of chop wounds in clinical forensic medicine is demonstrated by an illustrative case report of a young man who was attacked with a hatchet. 3DCT provides additional possibilities for supplementing missing information, such as number and direction of blows as well as weapon identification. Furthermore, 3DCT facilitates demonstration in court and understanding of medical lay people. We conclude that 3DCT is of particular value for the evaluation of survivors of life-threatening head and face injury. An increasing significance of this technique may be expected. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The forensic value of X-linked markers in mixed-male DNA analysis.

PubMed

He, HaiJun; Zha, Lagabaiyila; Cai, JinHong; Huang, Jian

2018-05-04

Autosomal genetic markers and Y chromosome markers have been widely applied in analysis of mixed stains at crime scenes by forensic scientists. However, true genotype combinations are often difficult to distinguish using autosomal markers when similar amounts of DNA are contributed by multiple donors. In addition, specific individuals cannot be determined by Y chromosomal markers because male relatives share the same Y chromosome. X-linked markers, possessing characteristics somewhere intermediate between autosomes and the Y chromosome, are less universally applied in criminal casework. In this paper, X markers are proposed to apply to male mixtures because their true genes can be more easily and accurately recognized than the decision of the genotypes of AS markers. In this study, an actual two-man mixed stain from a forensic case file and simulated male-mixed DNA were examined simultaneously with the X markers and autosomal markers. Finally, the actual mixture was separated successfully by the X markers, although it was unresolved by AS-STRs, and the separation ratio of the simulated mixture was much higher using Chr X tools than with AS methods. We believe X-linked markers provide significant advantages in individual discrimination of male mixtures that should be further applied to forensic work.

Electronic aroma detection technology for forensic and law enforcement applications

NASA Astrophysics Data System (ADS)

Barshick, Stacy-Ann; Griest, Wayne H.; Vass, Arpad A.

1997-02-01

A major problem hindering criminal investigations is the lack of appropriate tools for proper crime scene investigations. Often locating important pieces of evidence means relying on the ability of trained detection canines. Development of analytical technology to uncover and analyze evidence, potentially at the scene, could serve to expedite criminal investigations, searches, and court proceedings. To address this problem, a new technology based on gas sensor arrays was investigated for its applicability to forensic and law enforcement problems. The technology employs an array of sensors that respond to volatile chemical components yielding a characteristic 'fingerprint' pattern representative of the vapor-phase composition of a sample. Sample aromas can be analyzed and identified using artificial neural networks that are trained on known aroma patterns. Several candidate applications based on known technological needs of the forensic and law enforcement communities have been investigated. These applications have included the detection of aromas emanating from cadavers to aid in determining time since death, drug detection for deterring the manufacture, sale, and use of drugs of abuse, and the analysis of fire debris for accelerant identification. The result to date for these applications have been extremely promising and demonstrate the potential applicability of this technology for forensic use.

Opportunities for Fluid Dynamics Research in the Forensic Discipline of Bloodstain Pattern Analysis

NASA Astrophysics Data System (ADS)

Attinger, Daniel; Moore, Craig; Donaldson, Adam; Jafari, Arian; Stone, Howard

2013-11-01

This review [Forensic Science International, vol. 231, pp. 375-396, 2013] highlights research opportunities for fluid dynamics (FD) studies related to the forensic discipline of bloodstain pattern analysis (BPA). The need for better integrating FD and BPA is mentioned in a 2009 report by the US National Research Council, entitled ``Strengthening Forensic Science in the United States: A Path Forward''. BPA aims for practical answers to specific questions of the kind: ``How did a bloodletting incident happen?'' FD, on the other hand, aims to quantitatively describe the transport of fluids and the related causes, with general equations. BPA typically solves the indirect problem of inspecting stains in a crime scene to infer the most probable bloodletting incident that produced these patterns. FD typically defines the initial and boundary conditions of a fluid system and from there describe how the system evolves in time and space, most often in a deterministic manner. We review four topics in BPA with strong connections to FD: the generation of drops, their flight, their impact and the formation of stains. Future research on these topics would deliver new quantitative tools and methods for BPA, and present new multiphase flow problems for FD.

Using Forensics to Untangle Batch Effects in TCGA Data - TCGA

Cancer.gov

Rehan Akbani, Ph.D., and colleagues at the University of Texas MD Anderson Cancer Center developed a tool called MBatch to detect, diagnose, and correct batch effects in TCGA data. Read more about batch effects in this Case Study.

Detection of latent fingerprints by ultraviolet spectral imaging

NASA Astrophysics Data System (ADS)

Huang, Wei; Xu, Xiaojing; Wang, Guiqiang

2013-12-01

Spectral imaging technology research is becoming more popular in the field of forensic science. Ultraviolet spectral imaging technology is an especial part of the full spectrum of imaging technology. This paper finished the experiment contents of the ultraviolet spectrum imaging method and image acquisition system based on ultraviolet spectral imaging technology. Ultraviolet spectral imaging experiments explores a wide variety of ultraviolet reflectance spectra of the object material curve and its ultraviolet spectrum of imaging modalities, can not only gives a reference for choosing ultraviolet wavelength to show the object surface potential traces of substances, but also gives important data for the ultraviolet spectrum of imaging technology development.

[Forensic medical diagnostics of intra-vitality of the strangulation mark by morphological methods].

PubMed

Bogomolov, D V; Zbrueva, Yu V; Putintsev, V A; Denisova, O P

2016-01-01

The objective of the present study WaS to overview the current domestic and foreign literature concerning the up-to-date methods employed for the expert evaluation of intra-vitality of the strangulation mark. The secondary objective was to propose the new approaches for addressing this problem. The methods of expert diagnostics with a view to determining the time of infliction of injuries as exemplified by mechanical asphyxia are discussed. It is concluded that immunohistochemical and morphometric studies provide the most promising tools for the evaluation of intra-vitality of the strangulation mark for the purpose of forensic medical expertise.

País de gordos/país de muertos: Obesity, death and nation in biomedical and forensic genetics in Mexico

PubMed Central

García-Deister, Vivette; López-Beltrán, Carlos

2015-01-01

This article provides a comparison between genomic medicine and forensic genetics in Mexico, in light of recent depictions of the nation as a ‘país de gordos’ (country of the fat) and a ‘país de muertos’ (country of the dead). We examine the continuities and ruptures in the public image of genetics in these two areas of attention, health and security, focusing especially on how the relevant publics of genetic science are assembled in each case. Publics of biomedical and forensic genetics are assembled through processes of recruitment and interpellation, in ways that modulate current theorizations of co-production. The comparison also provides a vista onto discussions regarding the involvement of genetics in regimes of governance and citizenship and about the relationship between the state and biopower in a context of perceived health crisis and war-like violence. PMID:27479997

País de gordos/país de muertos: Obesity, death and nation in biomedical and forensic genetics in Mexico.

PubMed

García-Deister, Vivette; López-Beltrán, Carlos

2015-12-01

This article provides a comparison between genomic medicine and forensic genetics in Mexico, in light of recent depictions of the nation as a 'país de gordos' (country of the fat) and a 'país de muertos' (country of the dead). We examine the continuities and ruptures in the public image of genetics in these two areas of attention, health and security, focusing especially on how the relevant publics of genetic science are assembled in each case. Publics of biomedical and forensic genetics are assembled through processes of recruitment and interpellation, in ways that modulate current theorizations of co-production. The comparison also provides a vista onto discussions regarding the involvement of genetics in regimes of governance and citizenship and about the relationship between the state and biopower in a context of perceived health crisis and war-like violence.

[Modern biology, imagery and forensic medicine: contributions and limitations in examination of skeletal remains].

PubMed

Lecomte, Dominique; Plu, Isabelle; Froment, Alain

2012-06-01

Forensic examination is often requested when skeletal remains are discovered. Detailed visual observation can provide much information, such as the human or animal origin, sex, age, stature, and ancestry, and approximate time since death. New three-dimensional imaging techniques can provide further information (osteometry, facial reconstruction). Bone chemistry, and particularly measurement of stable or unstable carbon and nitrogen isotopes, yields information on diet and time since death, respectively. Genetic analyses of ancient DNA are also developing rapidly. Although seldom used in a judicial context, these modern anthropologic techniques are nevertheless available for the most complex cases.

Factors affecting length of stay in forensic hospital setting: need for therapeutic security and course of admission.

PubMed

Davoren, Mary; Byrne, Orla; O'Connell, Paul; O'Neill, Helen; O'Reilly, Ken; Kennedy, Harry G

2015-11-23

Patients admitted to a secure forensic hospital are at risk of a long hospital stay. Forensic hospital beds are a scarce and expensive resource and ability to identify the factors predicting length of stay at time of admission would be beneficial. The DUNDRUM-1 triage security scale and DUNDRUM-2 triage urgency scale are designed to assess need for therapeutic security and urgency of that need while the HCR-20 predicts risk of violence. We hypothesized that items on the DUNDRUM-1 and DUNDRUM-2 scales, rated at the time of pre-admission assessment, would predict length of stay in a medium secure forensic hospital setting. This is a prospective study. All admissions to a medium secure forensic hospital setting were collated over a 54 month period (n = 279) and followed up for a total of 66 months. Each patient was rated using the DUNDRUM-1 triage security scale and DUNDRUM-2 triage urgency scale as part of a pre-admission assessment (n = 279) and HCR-20 within 2 weeks of admission (n = 187). Episodes of harm to self, harm to others and episodes of seclusion whilst an in-patient were collated. Date of discharge was noted for each individual. Diagnosis at the time of pre-admission assessment (adjustment disorder v other diagnosis), predicted legal status (sentenced v mental health order) and items on the DUNDRUM-1 triage security scale and the DUNDRUM-2 triage urgency scale, also rated at the time of pre-admission assessment, predicted length of stay in the forensic hospital setting. Need for seclusion following admission also predicted length of stay. These findings may form the basis for a structured professional judgment instrument, rated prior to or at time of admission, to assist in estimating length of stay for forensic patients. Such a tool would be useful to clinicians, service planners and commissioners given the high cost of secure psychiatric care.

Developmental validation of the IrisPlex system: determination of blue and brown iris colour for forensic intelligence.

PubMed

Walsh, Susan; Lindenbergh, Alexander; Zuniga, Sofia B; Sijen, Titia; de Knijff, Peter; Kayser, Manfred; Ballantyne, Kaye N

2011-11-01

The IrisPlex system consists of a highly sensitive multiplex genotyping assay together with a statistical prediction model, providing users with the ability to predict blue and brown human eye colour from DNA samples with over 90% precision. This 'DNA intelligence' system is expected to aid police investigations by providing phenotypic information on unknown individuals when conventional DNA profiling is not informative. Falling within the new area of forensic DNA phenotyping, this paper describes the developmental validation of the IrisPlex assay following the Scientific Working Group on DNA Analysis Methods (SWGDAM) guidelines for the application of DNA-based eye colour prediction to forensic casework. The IrisPlex assay produces complete SNP genotypes with only 31pg of DNA, approximately six human diploid cell equivalents, and is therefore more sensitive than commercial STR kits currently used in forensics. Species testing revealed human and primate specificity for a complete SNP profile. The assay is capable of producing accurate results from simulated casework samples such as blood, semen, saliva, hair, and trace DNA samples, including extremely low quantity samples. Due to its design, it can also produce full profiles with highly degraded samples often found in forensic casework. Concordance testing between three independent laboratories displayed reproducible results of consistent levels on varying types of simulated casework samples. With such high levels of sensitivity, specificity, consistency and reliability, this genotyping assay, as a core part of the IrisPlex system, operates in accordance with SWGDAM guidelines. Furthermore, as we demonstrated previously, the IrisPlex eye colour prediction system provides reliable results without the need for knowledge on the bio-geographic ancestry of the sample donor. Hence, the IrisPlex system, with its model-based prediction probability estimation of blue and brown human eye colour, represents a useful tool for immediate application in accredited forensic laboratories, to be used for forensic intelligence in tracing unknown individuals from crime scene samples. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

[The significance of student competitions for the development of motivation for education and the acquisition of professional competences in the students the Department of Forensic Medical Expertise of the Sechenovsky University].

PubMed

Pigolkin, Yu I; Lomakin, Yu V; Leonova, E N

Russia joined the Bologna process in 2003 and since that time has become integrated into the unified European educational space. The key element of the new form of the higher education process is the self-guided unsupervised work of the students. Motivation is needed to promote the involvement of the students in the educational process which implies the necessity of the goal-oriented initiative for the acquisition of professional knowledge and practical experience in the field of forensic medicine. To achieve this goal, the Department of Forensic Medicine of I.M. Sechenov First Moscow State Medical University places special emphasis on the experience with carrying out student competitions. Each such competition consists of several contests focused on the solution of a specific problem, e.g. the inspection of the place of occurrence under investigation with a gunshot or punctured-and-incised wound, forensic medical autopsy, problem studies, and intelligence tests. All the contests and problem studies are held in the form of an interactive game. The experience gained in the course of the student competitions gives practical evidence that the interdepartmental intelligence contests contribute to raising the interest of students in forensic medicine. The open competition provides a highly efficient tool for the popularization of scientific knowledge and the promotion of interest in the participation in the forensic medical research activities. Moreover, the student competitions facilitate formation of the earlier professional skills indispensable for team working and the development of abilities for making decisions under the extreme conditions. In addition, the contests teach the participants the art of public appearance. They improve the quality of vocational training in forensic medicine and help to establish the first professional contacts at the interinstitutional (including international) level.

A researcher's review of adherence to forensic examination principles in homicide cases in Poland.

PubMed

Juszka, K; Juszka, K

The purpose of this paper is to verify adherence to forensic examination principles in homicide cases by analyzing the results of the author's own study of 90 court and prosecution cases from the period 2000-2010. The analyzed cases were sampled using the so-called multi-stage cluster sampling method, commonly used in social sciences in Poland. The cases were held in 17 organizational judiciary and prosecution units reporting to the Court of Appeal in Krakow and Appellate Prosecutor's Office in Krakow, respectively. The research tool was a questionnaire containing 40 relevant guidelines, covering both qualitative and quantitative features. In the 90 analyzed cases, a total of 251 forensic examination reports were prepared, including 110 site examination reports, 20 separate corpse examination reports, 29 personal examination reports and 92 object examination reports. The research aspects of forensic examinations will be analyzed from the perspective of adherence to the principles of conducting the same. As regards postulates de lege ferenda with respect to the implementation of forensic examination principles one should emphasize the need for using the appropriate form of description of corpse examination; the need for a more responsible attitude towards sealing off crime scenes and for recording information on sealing-off procedures in the examination report; the need for clear distinction of examination stages in drafting the examination report; the need for a detailed analysis of the examination carried out at its final stage at all times; the need for using professional vocabulary in all descriptions of examination activities in each case and the need for regular monitoring (by the person in charge of examination) also with regard to the tactical requirement to sign each sheet of the examination report. The tactical and procedural development of forensic examination principles, taking into account also the postulates de lege ferenda presented herein, will contribute to further development of forensic examination studies and will thus make examination a more common practice in criminal procedures.

Development of forensic-quality full mtGenome haplotypes: success rates with low template specimens.

PubMed

Just, Rebecca S; Scheible, Melissa K; Fast, Spence A; Sturk-Andreaggi, Kimberly; Higginbotham, Jennifer L; Lyons, Elizabeth A; Bush, Jocelyn M; Peck, Michelle A; Ring, Joseph D; Diegoli, Toni M; Röck, Alexander W; Huber, Gabriela E; Nagl, Simone; Strobl, Christina; Zimmermann, Bettina; Parson, Walther; Irwin, Jodi A

2014-05-01

Forensic mitochondrial DNA (mtDNA) testing requires appropriate, high quality reference population data for estimating the rarity of questioned haplotypes and, in turn, the strength of the mtDNA evidence. Available reference databases (SWGDAM, EMPOP) currently include information from the mtDNA control region; however, novel methods that quickly and easily recover mtDNA coding region data are becoming increasingly available. Though these assays promise to both facilitate the acquisition of mitochondrial genome (mtGenome) data and maximize the general utility of mtDNA testing in forensics, the appropriate reference data and database tools required for their routine application in forensic casework are lacking. To address this deficiency, we have undertaken an effort to: (1) increase the large-scale availability of high-quality entire mtGenome reference population data, and (2) improve the information technology infrastructure required to access/search mtGenome data and employ them in forensic casework. Here, we describe the application of a data generation and analysis workflow to the development of more than 400 complete, forensic-quality mtGenomes from low DNA quantity blood serum specimens as part of a U.S. National Institute of Justice funded reference population databasing initiative. We discuss the minor modifications made to a published mtGenome Sanger sequencing protocol to maintain a high rate of throughput while minimizing manual reprocessing with these low template samples. The successful use of this semi-automated strategy on forensic-like samples provides practical insight into the feasibility of producing complete mtGenome data in a routine casework environment, and demonstrates that large (>2kb) mtDNA fragments can regularly be recovered from high quality but very low DNA quantity specimens. Further, the detailed empirical data we provide on the amplification success rates across a range of DNA input quantities will be useful moving forward as PCR-based strategies for mtDNA enrichment are considered for targeted next-generation sequencing workflows. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Forensic age estimation on digital X-ray images: Medial epiphyses of the clavicle and first rib ossification in relation to chronological age.

PubMed

Garamendi, Pedro M; Landa, Maria I; Botella, Miguel C; Alemán, Inmaculada

2011-01-01

In recent years, there has been a renewed interest in forensic sciences about forensic age estimation in living subjects by means of radiological methods. This research was conducted on digital thorax X-rays to test the usefulness of some radiological changes in the clavicle and first rib. The sample consisted in a total of 123 subjects of Spanish origin (61 men and 62 women; age range: 5-75 years). From all subjects, a thorax posterior-anterior radiograph was obtained in digital format. Scoring for fusion of medial epiphyses of the clavicle was carried out by Schmeling's system and ossification of the costal cartilage of the first rib by Michelson's system. Degree of ossification and epiphyseal fusion were analyzed in relation with known age and sex of these subjects. The results give a minimum age of >20 years for full fusion of the medial epiphysis of the clavicle (Stages 4 and 5). Concerning the first rib, all subjects with the final Stage 3 of ossification were above 25 years of age. These results suggest that the first rib ossification might become an additional method to the ones so far recommended for forensic age estimation in subjects around 21. New research would be desirable to confirm this suggestion. © 2010 American Academy of Forensic Sciences.

Soil characterisation by bacterial community analysis for forensic applications: A quantitative comparison of environmental technologies.

PubMed

Habtom, Habteab; Demanèche, Sandrine; Dawson, Lorna; Azulay, Chen; Matan, Ofra; Robe, Patrick; Gafny, Ron; Simonet, Pascal; Jurkevitch, Edouard; Pasternak, Zohar

2017-01-01

The ubiquity and transferability of soil makes it a resource for the forensic investigator, as it can provide a link between agents and scenes. However, the information contained in soils, such as chemical compounds, physical particles or biological entities, is seldom used in forensic investigations; due mainly to the associated costs, lack of available expertise, and the lack of soil databases. The microbial DNA in soil is relatively easy to access and analyse, having thus the potential to provide a powerful means for discriminating soil samples or linking them to a common origin. We compared the effectiveness and reliability of multiple methods and genes for bacterial characterisation in the differentiation of soil samples: ribosomal intergenic spacer analysis (RISA), terminal restriction fragment length polymorphism (TRFLP) of the rpoB gene, and five methods using the 16S rRNA gene: phylogenetic microarrays, TRFLP, and high throughput sequencing with Roche 454, Illumina MiSeq and IonTorrent PGM platforms. All these methods were also compared to long-chain hydrocarbons (n-alkanes) and fatty alcohol profiling of the same soil samples. RISA, 16S TRFLP and MiSeq performed best, reliably and significantly discriminating between adjacent, similar soil types. As TRFLP employs the same capillary electrophoresis equipment and procedures used to analyse human DNA, it is readily available for use in most forensic laboratories. TRFLP was optimized for forensic usage in five parameters: choice of primer pair, fluorescent tagging, concentrating DNA after digestion, number of PCR amplifications per sample and number of capillary electrophoresis runs per PCR amplification. This study shows that molecular microbial ecology methodologies are robust in discriminating between soil samples, illustrating their potential usage as an evaluative forensic tool. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Causes and management of aggression and violence in a forensic mental health service: perspectives of nurses and patients.

PubMed

Dickens, Geoffrey; Piccirillo, Maria; Alderman, Nick

2013-12-01

Nurses' attitudes about the causes and management of aggression affects their choice of intervention. We aimed to compare the attitudes held by patients and staff in a forensic mental health service with the Management of Aggression and Violence Attitudes Scale, and examine the factor validity of the tool in this setting by conducting a prospective comparative questionnaire survey. Staff (n = 72) and patient (n = 98) attitudes differed to a limited extent. Confirmatory factor analysis refuted the previously reported structure of the tool. Exploratory factor analysis suggested three underlying factors related to modifiability of aggression, hands on management, and hands off management. Patients were more optimistic than nurses about the modifiability of aggressive behaviour. Male patients and those with diagnoses other than personality disorder were significantly more likely to agree about modifiability than controls. Forensic inpatients recognize the need for the use of a range of techniques to prevent and manage aggression and violence, but selected groups are most likely to believe that aggression is modifiable. Prevention and management of aggression training should emphasize the modifiability of aggressive behaviour. The development of measures of modifiability and management style would assist in the evaluation of training and would offer new avenues for research. © 2012 The Authors; International Journal of Mental Health Nursing © 2012 Australian College of Mental Health Nurses Inc.

Effects of group metacognitive training (MCT) on mental capacity and functioning in patients with psychosis in a secure forensic psychiatric hospital: a prospective-cohort waiting list controlled study.

PubMed

Naughton, Marie; Nulty, Andrea; Abidin, Zareena; Davoren, Mary; O'Dwyer, Sarah; Kennedy, Harry G

2012-06-18

Metacognitive Training (MCT) is a manualised cognitive intervention for psychosis aimed at transferring knowledge of cognitive biases and providing corrective experiences. The aim of MCT is to facilitate symptom reduction and protect against relapse. In a naturalistic audit of clinical effectiveness we examined what effect group MCT has on mental capacity, symptoms of psychosis and global function in patients with a psychotic illness, when compared with a waiting list comparison group. Of 93 patients detained in a forensic mental health hospital under both forensic and civil mental health legislation, 19 were assessed as suitable for MCT and 11 commenced. These were compared with 8 waiting list patients also deemed suitable for group MCT who did not receive it in the study timeframe. The PANSS, GAF, MacArthur Competence Assessment Tool- Treatment (MacCAT-T) and MacArthur Competence Assessment Tool-Fitness to Plead (MacCAT-FP) were recorded at baseline and repeated after group MCT or following treatment as usual in the waiting list group. When baseline functioning was accounted for, patients that attended MCT improved in capacity to consent to treatment as assessed by the MacCAT-T (p = 0.019). The more sessions attended, the greater the improvements in capacity to consent to treatment, mainly due to improvement in MacCAT-T understanding (p = 0.014) and reasoning . The GAF score improved in patients who attended the MCT group when compared to the waiting list group (p = 0.038) but there were no changes in PANSS scores. Measures of functional mental capacity and global function can be used as outcome measures for MCT. MCT can be used successfully even in psychotic patients detained in a forensic setting. The restoration of elements of decision making capacity such as understanding and reasoning may be a hither-to unrecognised advantage of such treatment. Because pharmacotherapy can be optimised and there is likely to be enough time to complete the course, there are clear opportunities to benefit from such treatment programmes in forensic settings.

Effects of group metacognitive training (MCT) on mental capacity and functioning in patients with psychosis in a secure forensic psychiatric hospital: a prospective-cohort waiting list controlled study

PubMed Central

2012-01-01

Background Metacognitive Training (MCT) is a manualised cognitive intervention for psychosis aimed at transferring knowledge of cognitive biases and providing corrective experiences. The aim of MCT is to facilitate symptom reduction and protect against relapse. In a naturalistic audit of clinical effectiveness we examined what effect group MCT has on mental capacity, symptoms of psychosis and global function in patients with a psychotic illness, when compared with a waiting list comparison group. Methods Of 93 patients detained in a forensic mental health hospital under both forensic and civil mental health legislation, 19 were assessed as suitable for MCT and 11 commenced. These were compared with 8 waiting list patients also deemed suitable for group MCT who did not receive it in the study timeframe. The PANSS, GAF, MacArthur Competence Assessment Tool- Treatment (MacCAT-T) and MacArthur Competence Assessment Tool-Fitness to Plead (MacCAT-FP) were recorded at baseline and repeated after group MCT or following treatment as usual in the waiting list group. Results When baseline functioning was accounted for, patients that attended MCT improved in capacity to consent to treatment as assessed by the MacCAT-T (p = 0.019). The more sessions attended, the greater the improvements in capacity to consent to treatment, mainly due to improvement in MacCAT-T understanding (p = 0.014) and reasoning . The GAF score improved in patients who attended the MCT group when compared to the waiting list group (p = 0.038) but there were no changes in PANSS scores. Conclusion Measures of functional mental capacity and global function can be used as outcome measures for MCT. MCT can be used successfully even in psychotic patients detained in a forensic setting. The restoration of elements of decision making capacity such as understanding and reasoning may be a hither-to unrecognised advantage of such treatment. Because pharmacotherapy can be optimised and there is likely to be enough time to complete the course, there are clear opportunities to benefit from such treatment programmes in forensic settings. PMID:22709616

Morphological changes in textile fibres exposed to environmental stresses: atomic force microscopic examination.

PubMed

Canetta, Elisabetta; Montiel, Kimberley; Adya, Ashok K

2009-10-30

The ability of the atomic force microscope (AFM) to investigate the nanoscopic morphological changes in the surfaces of fabrics was examined for the first time. This study focussed on two natural (cotton and wool), and a regenerated cellulose (viscose) textile fibres exposed to various environmental stresses for different lengths of times. Analyses of the AFM images allowed us to measure quantitatively the surface texture parameters of the environmentally stressed fabrics as a function of the exposure time. It was also possible to visualise at the nanoscale the finest details of the surfaces of three weathered fabrics and clearly distinguish between the detrimental effects of the imposed environmental conditions. This study confirmed that the AFM could become a very powerful tool in forensic examination of textile fibres to provide significant fibre evidence due to its capability of distinguishing between different environmental exposures or forced damages to fibres.

Application of modern autoradiography to nuclear forensic analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parsons-Davis, Tashi; Knight, Kim; Fitzgerald, Marc

Modern autoradiography techniques based on phosphorimaging technology using image plates (IPs) and digital scanning can identify heterogeneities in activity distributions and reveal material properties, serving to inform subsequent analyses. Here, we have adopted these advantages for applications in nuclear forensics, the technical analysis of radioactive or nuclear materials found outside of legal control to provide data related to provenance, production history, and trafficking route for the materials. IP autoradiography is a relatively simple, non-destructive method for sample characterization that records an image reflecting the relative intensity of alpha and beta emissions from a two-dimensional surface. Such data are complementary tomore » information gathered from radiochemical characterization via bulk counting techniques, and can guide the application of other spatially resolved techniques such as scanning electron microscopy (SEM) and secondary ion mass spectrometry (SIMS). IP autoradiography can image large 2-dimenstional areas (up to 20 × 40 cm), with relatively low detection limits for actinides and other radioactive nuclides, and sensitivity to a wide dynamic range (10 5) of activity density in a single image. Distributions of radioactivity in nuclear materials can be generated with a spatial resolution of approximately 50 μm using IP autoradiography and digital scanning. While the finest grain silver halide films still provide the best possible resolution (down to ~10 μm), IP autoradiography has distinct practical advantages such as shorter exposure times, no chemical post-processing, reusability, rapid plate scanning, and automated image digitization. Sample preparation requirements are minimal, and the analytical method does not consume or alter the sample. These advantages make IP autoradiography ideal for routine screening of nuclear materials, and for the identification of areas of interest for subsequent micro-characterization methods. Here in this article we present a summary of our setup, as modified for nuclear forensic sample analysis and related research, and provide examples of data from select samples from the nuclear fuel cycle and historical nuclear test debris.« less

Application of modern autoradiography to nuclear forensic analysis

DOE PAGES

Parsons-Davis, Tashi; Knight, Kim; Fitzgerald, Marc; ...

2018-05-20

Modern autoradiography techniques based on phosphorimaging technology using image plates (IPs) and digital scanning can identify heterogeneities in activity distributions and reveal material properties, serving to inform subsequent analyses. Here, we have adopted these advantages for applications in nuclear forensics, the technical analysis of radioactive or nuclear materials found outside of legal control to provide data related to provenance, production history, and trafficking route for the materials. IP autoradiography is a relatively simple, non-destructive method for sample characterization that records an image reflecting the relative intensity of alpha and beta emissions from a two-dimensional surface. Such data are complementary tomore » information gathered from radiochemical characterization via bulk counting techniques, and can guide the application of other spatially resolved techniques such as scanning electron microscopy (SEM) and secondary ion mass spectrometry (SIMS). IP autoradiography can image large 2-dimenstional areas (up to 20 × 40 cm), with relatively low detection limits for actinides and other radioactive nuclides, and sensitivity to a wide dynamic range (10 5) of activity density in a single image. Distributions of radioactivity in nuclear materials can be generated with a spatial resolution of approximately 50 μm using IP autoradiography and digital scanning. While the finest grain silver halide films still provide the best possible resolution (down to ~10 μm), IP autoradiography has distinct practical advantages such as shorter exposure times, no chemical post-processing, reusability, rapid plate scanning, and automated image digitization. Sample preparation requirements are minimal, and the analytical method does not consume or alter the sample. These advantages make IP autoradiography ideal for routine screening of nuclear materials, and for the identification of areas of interest for subsequent micro-characterization methods. Here in this article we present a summary of our setup, as modified for nuclear forensic sample analysis and related research, and provide examples of data from select samples from the nuclear fuel cycle and historical nuclear test debris.« less

Application of modern autoradiography to nuclear forensic analysis.

PubMed

Parsons-Davis, Tashi; Knight, Kim; Fitzgerald, Marc; Stone, Gary; Caldeira, Lee; Ramon, Christina; Kristo, Michael

2018-05-01

Modern autoradiography techniques based on phosphorimaging technology using image plates (IPs) and digital scanning can identify heterogeneities in activity distributions and reveal material properties, serving to inform subsequent analyses. Here, we have adopted these advantages for applications in nuclear forensics, the technical analysis of radioactive or nuclear materials found outside of legal control to provide data related to provenance, production history, and trafficking route for the materials. IP autoradiography is a relatively simple, non-destructive method for sample characterization that records an image reflecting the relative intensity of alpha and beta emissions from a two-dimensional surface. Such data are complementary to information gathered from radiochemical characterization via bulk counting techniques, and can guide the application of other spatially resolved techniques such as scanning electron microscopy (SEM) and secondary ion mass spectrometry (SIMS). IP autoradiography can image large 2-dimenstional areas (up to 20×40cm), with relatively low detection limits for actinides and other radioactive nuclides, and sensitivity to a wide dynamic range (10 5 ) of activity density in a single image. Distributions of radioactivity in nuclear materials can be generated with a spatial resolution of approximately 50μm using IP autoradiography and digital scanning. While the finest grain silver halide films still provide the best possible resolution (down to ∼10μm), IP autoradiography has distinct practical advantages such as shorter exposure times, no chemical post-processing, reusability, rapid plate scanning, and automated image digitization. Sample preparation requirements are minimal, and the analytical method does not consume or alter the sample. These advantages make IP autoradiography ideal for routine screening of nuclear materials, and for the identification of areas of interest for subsequent micro-characterization methods. In this paper we present a summary of our setup, as modified for nuclear forensic sample analysis and related research, and provide examples of data from select samples from the nuclear fuel cycle and historical nuclear test debris. Copyright © 2018 Elsevier B.V. All rights reserved.

Visualization of latent fingerprints beneath opaque electrical tapes by optical coherence tomography

NASA Astrophysics Data System (ADS)

Liu, Kangkang; Zhang, Ning; Meng, Li; Li, Zhigang; Xu, Xiaojing

2018-03-01

Electrical tape is found as one type of important trace evidence in crime scene. For example, it is very frequently used to insulate wires in explosive devices in many criminal cases. The fingerprints of the suspects were often left on the adhesive side of the tapes, which can provide very useful clues for the investigation and make it possible for individual identification. The most commonly used method to detect and visualize those latent fingerprints is to peel off each layer of the tapes first and then adopt the chemical methods to develop the fingerprints on the tapes. However, the peeling-off and chemical development process would degrade and contaminate the fingerprints and thus adversely affect the accuracy of identification. Optical coherence tomography (OCT) is a novel forensic imaging modality based on lowcoherence interferometry, which has the advantages of non-destruction, micrometer-level high resolution and crosssectional imaging. In this study, a fiber-based spectral-domain OCT (SD-OCT) system with {6μm resolution was employed to obtain the image of fingerprint sandwiched between two opaque electrical tapes without any pre-processing procedure like peeling-off. Three-dimensional (3D) OCT reconstruction was performed and the subsurface image was produced to visualize the latent fingerprints. The results demonstrate that OCT is a promising tool for recovering the latent fingerprints hidden beneath opaque electrical tape non-destructively and rapidly.

Towards Statistically Undetectable Steganography

DTIC Science & Technology

2011-06-30

payload size. Middle, payload proportional to y/N. Right, proportional to N. LSB replacement steganography in never-compressed cover images , detected...Books. (1) J. Fridrich, Steganography in Digital Media: Principles, Algorithms , and Applications, Cambridge University Press, November 2009. Journal... Images for Applications in Steganography ," IEEE Trans, on Info. Forensics and Security, vol. 3(2), pp. 247-258, 2008. Conference papers. (1) T. Filler

Forensic applications of cerebral single photon emission computed tomography in mild traumatic brain injury.

PubMed

Wortzel, Hal S; Filley, Christopher M; Anderson, C Alan; Oster, Timothy; Arciniegas, David B

2008-01-01

Traumatic brain injury (TBI) is a substantial source of mortality and morbidity world wide. Although most such injuries are relatively mild, accurate diagnosis and prognostication after mild TBI are challenging. These problems are complicated further when considered in medicolegal contexts, particularly civil litigation. Cerebral single photon emission computed tomography (SPECT) may contribute to the evaluation and treatment of persons with mild TBI. Cerebral SPECT is relatively sensitive to the metabolic changes produced by TBI. However, such changes are not specific to this condition, and their presence on cerebral SPECT imaging does not confirm a diagnosis of mild TBI. Conversely, the absence of abnormalities on cerebral SPECT imaging does not exclude a diagnosis of mild TBI, although such findings may be of prognostic value. The literature does not demonstrate consistent relationships between SPECT images and neuropsychological testing or neuropsychiatric symptoms. Using the rules of evidence shaped by Daubert v. Merrell Dow Pharmaceuticals, Inc., and its progeny to analyze the suitability of SPECT for forensic purposes, we suggest that expert testimony regarding SPECT findings should be admissible only as evidence to support clinical history, neuropsychological test results, and structural brain imaging findings and not as stand-alone diagnostic data.

Allele frequencies for 13 STRs loci in a Western Anatolia population and their forensic evaluation.

PubMed

Baransel Isir, Aysun; Ozkorkmaz, Abdulmuttalip; Pehlivan, Sacide

2015-01-01

Numerous studies demonstrated that STRs have become powerful tools in forensic case work. To profile DNA samples from 104 Turkish males for 13 autosomal, STR markers intended for human identification purposes and to estimate the allele frequency distribution in forensic cases in a Turkish population. Thirteen autosomal STR loci, namely D3S1358, D2S1338, D16S539, D8S1179, D21S11, D18S51, TH01, D13S317, D7S820, CSF1PO, TPOX, D5S818 and FGA, were analysed in a sample of 104 healthy and unrelated Turkish individuals who have been living in the city of İzmir. All loci were amplified by using AmpFlSTR Identifier Kit. Genetic analysis was carried out on an ABI PRISM 310 Genetic Analyser. For each locus, 6-15 alleles were found with frequencies ranging from 0.005-0.514 and heterozygosities ranging from 0.686-0.868. The PIC value was highly significant (0.999). The 13 STR loci in the AmpFlSTR Identifier Kit are suitable for forensic identification and paternity tests due to high heterozygosity. The observed PD value is sufficiently high for human identification purposes. In conclusion, the 13 STR loci seem to be useful markers for personal identification and forensic case work in the Turkish population. The results also demonstrate the importance of region-specific studies.

Tomodensitometric survey of the distance between thoracic and abdominal vital organs and the wall according to BMI, abdominal diameter and gender: proposition of an indicative chart for the forensic activities.

PubMed

Venara, A; Gaudin, A; Lebigot, J; Airagnes, G; Hamel, J F; Jousset, N; Ridereau-Zins, C; Mauillon, D; Rouge-Maillart, C

2013-06-10

Forensic doctors are frequently asked by magistrates when dealing principally with knife wounds, about the depth of the blade which may have penetrated the victim's body. Without the use of imaging, it is often difficult to respond to this question, even in an approximate way. Knowledge of the various distances between organs and the skin wall would allow an assessment to be made of the minimum blade length required to obtain the injuries observed. The objective of this study is thus to determine average distances between the vital organs of the thorax and abdomen, and the skin wall, taking into account the person's body mass index (BMI). This is a prospective single-center study, carried out over a 2-month period at University Hospital in Angers. A sample of 200 people was studied. The inclusion criteria were as follows: all patients coming to the radiology department and the emergency department for an abdominal, thoracic or thoraco-abdominal scan with injection. The exclusion criteria included patients presenting a large lymphoma, a large abdominal or retroperitoneal tumor, a tumor in one of the organs targeted by our study and patients presenting ascites. The organs focused on were: the pericardium, pleura, aorta, liver, spleen, kidneys, abdominal aorta and femoral arteries. The shortest distance between the organ and the skin wall was noted. Median distances were calculated according to gender, abdominal diameter and BMI. We associated these values to propose an indicative chart which may be used by doctors in connection with their forensic activities. The problem of the depth of a wound is frequently exposed to the expert. Without a reliable tool, it is difficult to value and a personal interpretation is often done. Even if, in current days, tomodensitometry is frequently done in vivo or after death, measurement can be difficult because of the local conditions. We classified values according to the different factors of fat repartition (BMI, abdominal diameter, gender). These tables, collectively used, permit evaluation of the distance between wall and thoracic or abdominal vital organs. We suggest an indicative chart designed for forensic doctors in their professional life to help determine the minimum penetration length for a knife, which may wound a vital organ. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Hyperspectral imaging of polymer banknotes for building and analysis of spectral library

NASA Astrophysics Data System (ADS)

Lim, Hoong-Ta; Murukeshan, Vadakke Matham

2017-11-01

The use of counterfeit banknotes increases crime rates and cripples the economy. New countermeasures are required to stop counterfeiters who use advancing technologies with criminal intent. Many countries started adopting polymer banknotes to replace paper notes, as polymer notes are more durable and have better quality. The research on authenticating such banknotes is of much interest to the forensic investigators. Hyperspectral imaging can be employed to build a spectral library of polymer notes, which can then be used for classification to authenticate these notes. This is however not widely reported and has become a research interest in forensic identification. This paper focuses on the use of hyperspectral imaging on polymer notes to build spectral libraries, using a pushbroom hyperspectral imager which has been previously reported. As an initial study, a spectral library will be built from three arbitrarily chosen regions of interest of five circulated genuine polymer notes. Principal component analysis is used for dimension reduction and to convert the information in the spectral library to principal components. A 99% confidence ellipse is formed around the cluster of principal component scores of each class and then used as classification criteria. The potential of the adopted methodology is demonstrated by the classification of the imaged regions as training samples.

Ultrafast High-Resolution Mass Spectrometric Finger Pore Imaging in Latent Finger Prints

NASA Astrophysics Data System (ADS)

Elsner, Christian; Abel, Bernd

2014-11-01

Latent finger prints (LFPs) are deposits of sweat components in ridge and groove patterns, left after human fingers contact with a surface. Being important targets in biometry and forensic investigations they contain more information than topological patterns. With laser desorption mass spectrometry imaging (LD-MSI) we record `three-dimensional' finger prints with additional chemical information as the third dimension. Here we show the potential of fast finger pore imaging (FPI) in latent finger prints employing LD-MSI without a classical matrix in a high- spatial resolution mode. Thin films of gold rapidly sputtered on top of the sample are used for desorption. FPI employing an optical image for rapid spatial orientation and guiding of the desorption laser enables the rapid analysis of individual finger pores, and the chemical composition of their excretions. With this approach we rapidly detect metabolites, drugs, and characteristic excretions from the inside of the human organism by a minimally-invasive strategy, and distinguish them from chemicals in contact with fingers without any labeling. The fast finger pore imaging, analysis, and screening approach opens the door for a vast number of novel applications in such different fields as forensics, doping and medication control, therapy, as well as rapid profiling of individuals.

Expert interpretation of bitemark injuries--a contemporary qualitative study.

PubMed

Page, Mark; Taylor, Jane; Blenkin, Matt

2013-05-01

This study attempts to characterize the nature of disagreement among odontologists in determining the fundamental properties of suspected bitemark injuries. Fifteen odontologists were asked to freely comment on six images of supposed bitemarks. Qualitative analysis using a grounded theory approach revealed that practitioner agreement was at best fair, with wide-ranging opinions on the origin, circumstance, and characteristics of the wound given for all six images. More experienced practitioners (>10 years) tended to agree with each other less than those who had 10 years or less experience in forensic odontology. The differences in opinions can be at least partly accounted for by the inconsistent nature of approaches used by different practitioners in assessing bitemark evidence. The results of this study indicate that more definitive guidelines as to the assessment of bitemarks as patterned injuries should be developed to ensure the highest possible level of practitioner agreement. © 2013 American Academy of Forensic Sciences.

A source-channel coding approach to digital image protection and self-recovery.

PubMed

Sarreshtedari, Saeed; Akhaee, Mohammad Ali

2015-07-01

Watermarking algorithms have been widely applied to the field of image forensics recently. One of these very forensic applications is the protection of images against tampering. For this purpose, we need to design a watermarking algorithm fulfilling two purposes in case of image tampering: 1) detecting the tampered area of the received image and 2) recovering the lost information in the tampered zones. State-of-the-art techniques accomplish these tasks using watermarks consisting of check bits and reference bits. Check bits are used for tampering detection, whereas reference bits carry information about the whole image. The problem of recovering the lost reference bits still stands. This paper is aimed at showing that having the tampering location known, image tampering can be modeled and dealt with as an erasure error. Therefore, an appropriate design of channel code can protect the reference bits against tampering. In the present proposed method, the total watermark bit-budget is dedicated to three groups: 1) source encoder output bits; 2) channel code parity bits; and 3) check bits. In watermark embedding phase, the original image is source coded and the output bit stream is protected using appropriate channel encoder. For image recovery, erasure locations detected by check bits help channel erasure decoder to retrieve the original source encoded image. Experimental results show that our proposed scheme significantly outperforms recent techniques in terms of image quality for both watermarked and recovered image. The watermarked image quality gain is achieved through spending less bit-budget on watermark, while image recovery quality is considerably improved as a consequence of consistent performance of designed source and channel codes.

Sensor noise camera identification: countering counter-forensics

NASA Astrophysics Data System (ADS)

Goljan, Miroslav; Fridrich, Jessica; Chen, Mo

2010-01-01

In camera identification using sensor noise, the camera that took a given image can be determined with high certainty by establishing the presence of the camera's sensor fingerprint in the image. In this paper, we develop methods to reveal counter-forensic activities in which an attacker estimates the camera fingerprint from a set of images and pastes it onto an image from a different camera with the intent to introduce a false alarm and, in doing so, frame an innocent victim. We start by classifying different scenarios based on the sophistication of the attacker's activity and the means available to her and to the victim, who wishes to defend herself. The key observation is that at least some of the images that were used by the attacker to estimate the fake fingerprint will likely be available to the victim as well. We describe the socalled "triangle test" that helps the victim reveal attacker's malicious activity with high certainty under a wide range of conditions. This test is then extended to the case when none of the images that the attacker used to create the fake fingerprint are available to the victim but the victim has at least two forged images to analyze. We demonstrate the test's performance experimentally and investigate its limitations. The conclusion that can be made from this study is that planting a sensor fingerprint in an image without leaving a trace is significantly more difficult than previously thought.

Methodological approach to crime scene investigation: the dangers of technology

NASA Astrophysics Data System (ADS)

Barnett, Peter D.

1997-02-01

The visitor to any modern forensic science laboratory is confronted with equipment and processes that did not exist even 10 years ago: thermocyclers to allow genetic typing of nanogram amounts of DNA isolated from a few spermatozoa; scanning electron microscopes that can nearly automatically detect submicrometer sized particles of molten lead, barium and antimony produced by the discharge of a firearm and deposited on the hands of the shooter; and computers that can compare an image of a latent fingerprint with millions of fingerprints stored in the computer memory. Analysis of populations of physical evidence has permitted statistically minded forensic scientists to use Bayesian inference to draw conclusions based on a priori assumptions which are often poorly understood, irrelevant, or misleading. National commissions who are studying quality control in DNA analysis propose that people with barely relevant graduate degrees and little forensic science experience be placed in charge of forensic DNA laboratories. It is undeniable that high- tech has reversed some miscarriages of justice by establishing the innocence of a number of people who were imprisoned for years for crimes that they did not commit. However, this papers deals with the dangers of technology in criminal investigations.

Nuclear Forensics: A Capability at Risk (Abbreviated Version)

DOE Office of Scientific and Technical Information (OSTI.GOV)

National Research Council of the National Academies

Nuclear forensics is important to our national security. Actions, including provision of appropriate funding, are needed now to sustain and improve the nation's nuclear forensics capabilities. The Department of Homeland Security (DHS), working with cooperating agencies and national laboratories, should plan and implement a sustainable, effective nuclear forensics program. Nuclear forensics is the examination and evaluation of discovered or seized nuclear materials and devices or, in cases of nuclear explosions or radiological dispersals, of detonation signals and post-detonation debris. Nuclear forensic evidence helps law enforcement and intelligence agencies work toward preventing, mitigating, and attributing a nuclear or radiological incident. Thismore » report, requested by DHS, the National Nuclear Security Administration, and the Department of Defense, makes recommendations on how to sustain and improve U.S. nuclear forensics capabilities. The United States has developed a nuclear forensics capability that has been demonstrated in real-world incidents of interdicted materials and in exercises of actions required after a nuclear detonation. The committee, however, has concerns about the program and finds that without strong leadership, careful planning, and additional funds, these capabilities will decline. Major areas of concern include: Organization. The responsibility for nuclear forensics is shared by several agencies without central authority and with no consensus on strategic requirements to guide the program. This organizational complexity hampers the program and could prove to be a major hindrance operationally. Sustainability. The nation's current nuclear forensics capabilities are available primarily because the system of laboratories, equipment, and personnel upon which they depend was developed and funded by the nuclear weapons program. However, the weapons program's funds are declining. Workforce and Infrastructure. Personnel skilled in nuclear forensics are too few and are spread too thinly. Some key facilities are in need of replacement because they are old, outdated, and not built to modern environmental, health, and safety standards. Procedures and Tools. Most nuclear forensics techniques were developed to carry out Cold War missions and to satisfy a different, less restrictive set of environmental, health, and safety standards. Some of the equipment also does not reflect today's technical capabilities. The Executive Office of the President established the National Technical Nuclear Forensics Center under the direction of the Secretary of Homeland Security, to coordinate nuclear forensics in the United States. DHS's responsibility can only be carried out with the cooperation and support of the other agencies involved. The committee recommends that DHS and the other cooperating agencies should: 1. Streamline the organizational structure, aligning authority and responsibility; and develop and issue appropriate requirements documents. 2. Issue a coordinated and integrated implementation plan for fulfilling the requirements and sustaining and improving the program's capabilities. This plan would form the basis for the agencies' multi-year program budget requests. 3. Implement a plan to build and maintain an appropriately sized and composed nuclear forensics workforce, ensuring sufficient staffing at the national laboratories and support for university research, training programs, and collaborative relationships among the national laboratories and other organizations. 4. Adapt nuclear forensics to the challenges of real emergency situations, including, for example, conducting more realistic exercises that are unannounced and that challenge regulations and procedures followed in the normal work environment, and implementing lessons learned. The national laboratories should: 5. Optimize procedures and equipment through R&D to meet program requirements. Modeling and simulation should play an increased role in research, development, and planning. The nuclear forensics community should: 6. Develop standards and procedures for nuclear forensics that are rooted in the same underlying principles that have been recommended to guide modern forensic science. DHS and the other cooperating agencies should: 7. Devise and implement a plan that enables access to relevant information in databases including classified and proprietary databases for nuclear forensics missions. The Executive Office of the President and the Department of State, working with the community of nuclear forensics experts, should: 8. Determine the classes of data and methods that are to be shared internationally and explore mechanisms to accomplish that sharing.« less

GrigoraSNPs: Optimized Analysis of SNPs for DNA Forensics.

PubMed

Ricke, Darrell O; Shcherbina, Anna; Michaleas, Adam; Fremont-Smith, Philip

2018-04-16

High-throughput sequencing (HTS) of single nucleotide polymorphisms (SNPs) enables additional DNA forensic capabilities not attainable using traditional STR panels. However, the inclusion of sets of loci selected for mixture analysis, extended kinship, phenotype, biogeographic ancestry prediction, etc., can result in large panel sizes that are difficult to analyze in a rapid fashion. GrigoraSNP was developed to address the allele-calling bottleneck that was encountered when analyzing SNP panels with more than 5000 loci using HTS. GrigoraSNPs uses a MapReduce parallel data processing on multiple computational threads plus a novel locus-identification hashing strategy leveraging target sequence tags. This tool optimizes the SNP calling module of the DNA analysis pipeline with runtimes that scale linearly with the number of HTS reads. Results are compared with SNP analysis pipelines implemented with SAMtools and GATK. GrigoraSNPs removes a computational bottleneck for processing forensic samples with large HTS SNP panels. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

Evaluating competency to stand trial with evidence-based practice.

PubMed

Rogers, Richard; Johansson-Love, Jill

2009-01-01

Evaluations for competency to stand trial are distinguished from other areas of forensic consultation by their long history of standardized assessment beginning in the 1970s. As part of a special issue of the Journal on evidence-based forensic practice, this article examines three published competency measures: the MacArthur Competence Assessment Tool-Criminal Adjudication (MacCAT-CA), the Evaluation of Competency to Stand Trial-Revised (ECST-R), and the Competence Assessment for Standing Trial for Defendants with Mental Retardation (CAST-MR). Using the Daubert guidelines as a framework, we examined each competency measure regarding its relevance to the Dusky standard and its error and classification rates. The article acknowledges the past polarization of forensic practitioners on acceptance versus rejection of competency measures. It argues that no valuable information, be it clinical acumen or standardized data, should be systematically ignored. Consistent with the American Academy of Psychiatry and the Law Practice Guideline, it recommends the integration of competency interview findings with other sources of data in rendering evidence-based competency determinations.

Forensic interlaboratory evaluation of the ForFLUID kit for vaginal fluids identification.

PubMed

Giampaoli, Saverio; Alessandrini, Federica; Berti, Andrea; Ripani, Luigi; Choi, Ajin; Crab, Roselien; De Vittori, Elisabetta; Egyed, Balazs; Haas, Cordula; Lee, Hwan Young; Korabecná, Marie; Noel, Fabrice; Podini, Daniele; Tagliabracci, Adriano; Valentini, Alessio; Romano Spica, Vincenzo

2014-01-01

Identification of vaginal fluids is an important step in the process of sexual assaults confirmation. Advances in both microbiology and molecular biology defined technical approaches allowing the discrimination of body fluids. These protocols are based on the identification of specific bacterial communities by microfloraDNA (mfDNA) amplification. A multiplex real time-PCR assay (ForFLUID kit) has been developed for identifying biological fluids and for discrimination among vaginal, oral and fecal samples. In order to test its efficacy and reliability of the assay in the identification of vaginal fluids, an interlaboratory evaluation has been performed on homogeneous vaginal swabs. All the involved laboratories were able to correctly recognize all the vaginal swabs, and no false positives were identified when the assay was applied on non-vaginal samples. The assay represents an useful molecular tool that can be easily adopted by forensic geneticists involved in vaginal fluid identification. Copyright © 2013 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Application of DNA forensic techniques for identifying poached guanacos (Lama guanicoe) in Chilean Patagonia*.

PubMed

Marín, Juan C; Saucedo, Cristian E; Corti, Paulo; González, Benito A

2009-09-01

Guanaco (Lama guanicoe) is a protected and widely distributed ungulate in South America. A poacher, after killing guanacos in Valle Chacabuco, Chilean Patagonia, transported and stored the meat. Samples were retrieved by local police but the suspect argued that the meat was from a horse. Mitochondrial cytochrome b gene (774 pb), 15 loci microsatellites, and SRY gene were used to identify the species, number of animals and their population origin, and the sex of the animals, respectively. Analysis revealed that the samples came from a female (absence of SRY gene) Patagonian guanaco (assignment probability between 0.0075 and 0.0282), and clearly distinguishing it from sympatric ungulates (E-value = 0). Based on the evidence obtained in the field in addition to forensic data, the suspect was convicted of poaching and illegally carrying fire arms. This is the first report of molecular tools being used in forensic investigations of Chilean wildlife indicating its promising future application in guanaco management and conservation.

Aircraft mishap investigation with radiology-assisted autopsy: helicopter crash with control injury.

PubMed

Folio, R Les; Harcke, H Theodore; Luzi, Scott A

2009-04-01

Radiology-assisted autopsy traditionally has been plain film-based, but now is being augmented by computed tomography (CT). The authors present a two-fatality rotary wing crash scenario illustrating application of advanced radiographic techniques that can guide and supplement the forensic pathologist's physical autopsy. The radiographic findings also have the potential for use by the aircraft mishap investigation board. Prior to forensic autopsy, the two crash fatalities were imaged with conventional two-dimensional radiographs (digital technique) and with multidetector CT The CT data were used for multiplanar two-dimensional and three-dimensional (3D) image reconstruction. The forensic pathologist was provided with information about skeletal fractures, metal fragment location, and other pathologic findings of potential use in the physical autopsy. The radiologic autopsy served as a supplement to the physical autopsy and did not replace the traditional autopsy in these cases. Both individuals sustained severe blunt force trauma with multiple fractures of the skull, face, chest, pelvis, and extremities. Individual fractures differed; however, one individual showed hand and lower extremity injuries similar to those associated with control of the aircraft at the time of impact. The concept of "control injury" has been challenged by Campman et al., who found that control surface injuries have a low sensitivity and specificity for establishing who the pilot was in an accident. The application of new post mortem imaging techniques may help to resolve control injury questions. In addition, the combination of injuries in our cases may contribute to further understanding of control surface injury patterns in helicopter mishaps.

Estimating error rates for firearm evidence identifications in forensic science

PubMed Central

Song, John; Vorburger, Theodore V.; Chu, Wei; Yen, James; Soons, Johannes A.; Ott, Daniel B.; Zhang, Nien Fan

2018-01-01

Estimating error rates for firearm evidence identification is a fundamental challenge in forensic science. This paper describes the recently developed congruent matching cells (CMC) method for image comparisons, its application to firearm evidence identification, and its usage and initial tests for error rate estimation. The CMC method divides compared topography images into correlation cells. Four identification parameters are defined for quantifying both the topography similarity of the correlated cell pairs and the pattern congruency of the registered cell locations. A declared match requires a significant number of CMCs, i.e., cell pairs that meet all similarity and congruency requirements. Initial testing on breech face impressions of a set of 40 cartridge cases fired with consecutively manufactured pistol slides showed wide separation between the distributions of CMC numbers observed for known matching and known non-matching image pairs. Another test on 95 cartridge cases from a different set of slides manufactured by the same process also yielded widely separated distributions. The test results were used to develop two statistical models for the probability mass function of CMC correlation scores. The models were applied to develop a framework for estimating cumulative false positive and false negative error rates and individual error rates of declared matches and non-matches for this population of breech face impressions. The prospect for applying the models to large populations and realistic case work is also discussed. The CMC method can provide a statistical foundation for estimating error rates in firearm evidence identifications, thus emulating methods used for forensic identification of DNA evidence. PMID:29331680

Estimating error rates for firearm evidence identifications in forensic science.

PubMed

Song, John; Vorburger, Theodore V; Chu, Wei; Yen, James; Soons, Johannes A; Ott, Daniel B; Zhang, Nien Fan

2018-03-01

Estimating error rates for firearm evidence identification is a fundamental challenge in forensic science. This paper describes the recently developed congruent matching cells (CMC) method for image comparisons, its application to firearm evidence identification, and its usage and initial tests for error rate estimation. The CMC method divides compared topography images into correlation cells. Four identification parameters are defined for quantifying both the topography similarity of the correlated cell pairs and the pattern congruency of the registered cell locations. A declared match requires a significant number of CMCs, i.e., cell pairs that meet all similarity and congruency requirements. Initial testing on breech face impressions of a set of 40 cartridge cases fired with consecutively manufactured pistol slides showed wide separation between the distributions of CMC numbers observed for known matching and known non-matching image pairs. Another test on 95 cartridge cases from a different set of slides manufactured by the same process also yielded widely separated distributions. The test results were used to develop two statistical models for the probability mass function of CMC correlation scores. The models were applied to develop a framework for estimating cumulative false positive and false negative error rates and individual error rates of declared matches and non-matches for this population of breech face impressions. The prospect for applying the models to large populations and realistic case work is also discussed. The CMC method can provide a statistical foundation for estimating error rates in firearm evidence identifications, thus emulating methods used for forensic identification of DNA evidence. Published by Elsevier B.V.

Structure Sensor for mobile markerless augmented reality

NASA Astrophysics Data System (ADS)

Kilgus, T.; Bux, R.; Franz, A. M.; Johnen, W.; Heim, E.; Fangerau, M.; Müller, M.; Yen, K.; Maier-Hein, L.

2016-03-01

3D Visualization of anatomical data is an integral part of diagnostics and treatment in many medical disciplines, such as radiology, surgery and forensic medicine. To enable intuitive interaction with the data, we recently proposed a new concept for on-patient visualization of medical data which involves rendering of subsurface structures on a mobile display that can be moved along the human body. The data fusion is achieved with a range imaging device attached to the display. The range data is used to register static 3D medical imaging data with the patient body based on a surface matching algorithm. However, our previous prototype was based on the Microsoft Kinect camera and thus required a cable connection to acquire color and depth data. The contribution of this paper is two-fold. Firstly, we replace the Kinect with the Structure Sensor - a novel cable-free range imaging device - to improve handling and user experience and show that the resulting accuracy (target registration error: 4.8+/-1.5 mm) is comparable to that achieved with the Kinect. Secondly, a new approach to visualizing complex 3D anatomy based on this device, as well as 3D printed models of anatomical surfaces, is presented. We demonstrate that our concept can be applied to in vivo data and to a 3D printed skull of a forensic case. Our new device is the next step towards clinical integration and shows that the concept cannot only be applied during autopsy but also for presentation of forensic data to laypeople in court or medical education.

Microbial Source Tracking: Current and Future Molecular Tools in Microbial Water Quality Forensics

EPA Science Inventory

Current regulations in the United States stipulate that the microbial quality of waters used for consumption and recreational activities should be determined regularly by measuring microbial indicators of fecal pollution. Hence, the microbial risk associated with these waters is...

Evaluating O, C, and N isotopes in human hair as a forensic tool to reconstruct travel

NASA Astrophysics Data System (ADS)

Ehleringer, Jim; Chesson, Lesley; Cerling, Thure; Valenzuela, Luciano

2014-05-01

Oxygen isotope ratios in the proteins of human scalp hair have been proposed and modeled as a tool for reconstructing the movements of humans and evaluating the likelihood that an individual is a resident or non-resident of a particular geographic region. Carbon and nitrogen isotope ratios reflect dietary input and complement oxygen isotope data interpretation when it is necessary to distinguish potential location overlap among continents. The combination of a time sequence analysis in hair segments and spatial models that describe predicted geographic variation in hair isotope values represents a potentially powerful tool for forensic investigations. The applications of this technique have thus far been to provide assistance to law enforcement with information on the predicted geographical travel histories of unidentified murder victims. Here we review multiple homicide cases from the USA where stable isotope analysis of hair has been applied and for which we now know the travel histories of the murder victims. Here we provide information on the robustness of the original data sets used to test these models by evaluating the travel histories of randomly collected hair discarded in Utah barbershops.

Applicability of the ParaDNA(®) Screening System to Seminal Samples.

PubMed

Tribble, Nicholas D; Miller, Jamie A D; Dawnay, Nick; Duxbury, Nicola J

2015-05-01

Seminal fluid represents a common biological material recovered from sexual assault crime scenes. Such samples can be prescreened using different techniques to determine cell type and relative amount before submitting for full STR profiling. The ParaDNA(®) Screening System is a novel forensic test which identifies the presence of DNA through amplification and detection of two common STR loci (D16S539 and TH01) and the Amelogenin marker. The detection of the Y allele in samples could provide a useful tool in the triage and submission of sexual assault samples by enforcement authorities. Male template material was detected on a range of common sexual assault evidence items including cotton pillow cases, condoms, swab heads and glass surfaces and shows a detection limit of 1 in 1000 dilution of neat semen. These data indicate this technology has the potential to be a useful tool for the detection of male donor DNA in sexual assault casework. © 2015 American Academy of Forensic Sciences.

Fingerprint Ridge Density as a Potential Forensic Anthropological Tool for Sex Identification.

PubMed

Dhall, Jasmine Kaur; Kapoor, Anup Kumar

2016-03-01

In cases of partial or poor print recovery and lack of database/suspect print, fingerprint evidence is generally neglected. In light of such constraints, this study was designed to examine whether ridge density can aid in narrowing down the investigation for sex identification. The study was conducted on the right-hand index digit of 245 males and 246 females belonging to the Punjabis of Delhi region. Five ridge density count areas, namely upper radial, radial, ulnar, upper ulnar, and proximal, were selected and designated. Probability of sex origin was calculated, and stepwise discriminant function analysis was performed to determine the discriminating ability of the selected areas. Females were observed with a significantly higher ridge density than males in all the five areas. Discriminant function analysis and logistic regression exhibited 96.8% and 97.4% accuracy, respectively, in sex identification. Hence, fingerprint ridge density is a potential tool for sex identification, even from partial prints. © 2015 American Academy of Forensic Sciences.

An eye tracking study of bloodstain pattern analysts during pattern classification.

PubMed

Arthur, R M; Hoogenboom, J; Green, R D; Taylor, M C; de Bruin, K G

2018-05-01

Bloodstain pattern analysis (BPA) is the forensic discipline concerned with the classification and interpretation of bloodstains and bloodstain patterns at the crime scene. At present, it is unclear exactly which stain or pattern properties and their associated values are most relevant to analysts when classifying a bloodstain pattern. Eye tracking technology has been widely used to investigate human perception and cognition. Its application to forensics, however, is limited. This is the first study to use eye tracking as a tool for gaining access to the mindset of the bloodstain pattern expert. An eye tracking method was used to follow the gaze of 24 bloodstain pattern analysts during an assigned task of classifying a laboratory-generated test bloodstain pattern. With the aid of an automated image-processing methodology, the properties of selected features of the pattern were quantified leading to the delineation of areas of interest (AOIs). Eye tracking data were collected for each AOI and combined with verbal statements made by analysts after the classification task to determine the critical range of values for relevant diagnostic features. Eye-tracking data indicated that there were four main regions of the pattern that analysts were most interested in. Within each region, individual elements or groups of elements that exhibited features associated with directionality, size, colour and shape appeared to capture the most interest of analysts during the classification task. The study showed that the eye movements of trained bloodstain pattern experts and their verbal descriptions of a pattern were well correlated.

"Blind spots" in forensic autopsy: improved detection of retrobulbar hemorrhage and orbital lesions by postmortem computed tomography (PMCT).

PubMed

Flach, P M; Egli, T C; Bolliger, S A; Berger, N; Ampanozi, G; Thali, M J; Schweitzer, W

2014-09-01

The purpose of this study was to correlate the occurrence of retrobulbar hemorrhage (RBH) with mechanism of injury, external signs and autopsy findings to postmortem computed tomography (PMCT). Six-teen subjects presented with RBH and underwent PMCT, external inspection and conventional autopsy. External inspection was evaluated for findings of the bulbs, black eye, raccoon eyes and Battle's sign. Fractures of the viscerocranium, orbital lesions and RBH were evaluated by PMCT. Autopsy and PMCT was evaluated for orbital roof and basilar skull fracture. The leading manner of death was accident with central regulatory failure in cases of RBH (31.25%). Imaging showed a high sensitivity in detection of orbital roof and basilar skull fractures (100%), but was less specific compared to autopsy. Volume of RBH (0.1-2.4ml) correlated positively to the presence of Battle's sign (p<0.06) and the postmortem interval. Ecchymosis on external inspection correlated with RBH. There was a statistical significant correlation between bulbar lesion and RBH. Orbital roof fracture count weakly correlated with the total PMCT derived RBH volume. Maxillary hemosinus correlated to maxillary fractures, but not to RBH. RBH are a specific finding in forensically relevant head trauma. PMCT is an excellent tool in detecting and quantifying morphological trauma findings particularly in the viscerocranium, one of the most relevant "blind spots" of classic autopsy. PMCT was superior in detecting osseous lesions, scrutinizing autopsy as the gold standard. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Pulp/tooth ratio of mandibular first and second molars on panoramic radiographs: An aid for forensic age estimation

PubMed Central

Shah, Palak H.; Venkatesh, Rashmi

2016-01-01

Objective: To determine and compare the accuracy of pulp/tooth ratio method in mandibular first and second molar teeth in forensic age estimation. Materials and Methods: A total 300 panoramic radiographs of the Gujarati population (187 males and 113 females) were studied. The measurements of Pulp Chamber Height (PCH) and Crown Root Trunk Height (CRTH) were performed on the mandibular first and second molar teeth. The acquired data was subjected to correlation and regression. Results: The pulp chamber crown root trunk height ratios (PCTHR) of both the first (r = −0.609) and second molars (r = −0.422) were significantly correlated with the age of the individual. Individual regression formulae were derived for both the teeth which were then used separately to calculate the age. The standard errors estimate (SEE) for the first and second molars were 8.84 years and 10.11 years, respectively. There was no statistically significant difference between chronological and calculated age by both the teeth (P = 1.000). Conclusion: The mandibular first and second molar is a potential tool for age estimation in forensic dentistry. The pulp/tooth ratio of both the teeth is a useful method for forensic age prediction with reasonable accuracy in the Gujarati population. PMID:27555734

Physics in the Courtroom

NASA Astrophysics Data System (ADS)

Vosk, Ted

2011-10-01

The principles, methods and technologies of physics can provide a powerful tool for the discovery of truth in the criminal justice system. Accordingly, physics based forensic evidence is relied upon in criminal prosecutions around the country every day. Infrared spectroscopy for the determination of the alcohol concentration of an individual's breath, force, momentum and multi-body dynamics for purposes of accident reconstruction and the basic application of sound metrological (measurement) practices constitute but a few examples. In many cases, a jury's determination of guilt or innocence, upon which the liberty of a Citizen rests, may in fact be determined by such evidence. Society may well place a high degree of confidence in the integrity of verdicts so obtained when ``the physics'' has been applied in a valid manner. Unfortunately, as concluded by the National Academy of Sciences, ``The law's greatest dilemma in its heavy reliance on forensic evidence--concerns the question of whether---and to what extent-- -there is science in any given `forensic science' discipline.'' Even where valid physical principles are relied upon, their improper application by forensic practitioners who have little physics training, background and/or understanding calls into question the validity of results or conclusions obtained. This presentation provides examples of the application of physics in the courtroom, where problems have been discovered and how they can be addressed by the physics community.

Current genetic methodologies in the identification of disaster victims and in forensic analysis.

PubMed

Ziętkiewicz, Ewa; Witt, Magdalena; Daca, Patrycja; Zebracka-Gala, Jadwiga; Goniewicz, Mariusz; Jarząb, Barbara; Witt, Michał

2012-02-01

This review presents the basic problems and currently available molecular techniques used for genetic profiling in disaster victim identification (DVI). The environmental conditions of a mass disaster often result in severe fragmentation, decomposition and intermixing of the remains of victims. In such cases, traditional identification based on the anthropological and physical characteristics of the victims is frequently inconclusive. This is the reason why DNA profiling became the gold standard for victim identification in mass-casualty incidents (MCIs) or any forensic cases where human remains are highly fragmented and/or degraded beyond recognition. The review provides general information about the sources of genetic material for DNA profiling, the genetic markers routinely used during genetic profiling (STR markers, mtDNA and single-nucleotide polymorphisms [SNP]) and the basic statistical approaches used in DNA-based disaster victim identification. Automated technological platforms that allow the simultaneous analysis of a multitude of genetic markers used in genetic identification (oligonucleotide microarray techniques and next-generation sequencing) are also presented. Forensic and population databases containing information on human variability, routinely used for statistical analyses, are discussed. The final part of this review is focused on recent developments, which offer particularly promising tools for forensic applications (mRNA analysis, transcriptome variation in individuals/populations and genetic profiling of specific cells separated from mixtures).

Using DNA-barcoding to make the necrobiont beetle family Cholevidae accessible for forensic entomology.

PubMed

Schilthuizen, Menno; Scholte, Cindy; van Wijk, Renske E J; Dommershuijzen, Jessy; van der Horst, Devi; Zu Schlochtern, Melanie Meijer; Lievers, Rik; Groenenberg, Dick S J

2011-07-15

The beetle family Cholevidae (Coleoptera: Staphylinoidea), sometimes viewed as the subfamily Cholevinae of the Leiodidae, consists of some 1700 species worldwide. With the exception of specialized cave-dwelling species and species living in bird and mammal nests and burrows, the species are generalized soil-dwellers that, at least in temperate regions, are mostly found on vertebrate cadavers. Although they have been regularly reported from human corpses, and offer potential because of many species' peak activity in the cold season, they have not been a focus of forensic entomologists so far. This is probably due to their small size and the difficulty in identifying the adults and their larvae. In this paper, we show that DNA-barcoding can help make this group of necrobiont beetles available as a tool for forensic research. We collected 86 specimens of 20 species of the genera Catops, Fissocatops, Apocatops, Choleva, Nargus, Ptomaphagus, and Sciodrepoides from the Netherlands and France and show that a broad "barcoding gap" allows almost all species to be easily and unambiguously identified by the sequence of the "barcoding gene" cytochrome c oxidase I (COI). This opens up the possibility of adding Cholevidae to the set of insect taxa routinely used in forensic entomology. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Chemotaxonomic Profile and Intraspecific Variation in the Blow Fly of Forensic Interest Chrysomya megacephala (Diptera: Calliphoridae).

PubMed

Paula, Michele C; Antonialli-Junior, William F; Mendonça, Angélica; Michelutti, Kamylla B; Eulalio, Aylson D M M; Cardoso, Claudia A L; de Lima, Thiago; Von Zuben, Cláudio J

2017-01-01

Necrophagous insects such as blow flies (Diptera: Calliphoridae) are considered crucial in forensic entomology. Identification at species level and determination of larval stage are the basis for estimation of postmortem interval (PMI). Insect evidence can also be used in the determination of crime scenes, since body displacement is common. The aim of this study was to determine the chemotaxonomic profile and intraspecific variability of the forensically important blow fly Chrysomya megacephala (F. 1794). Adults were collected in the municipalities of Dourados-MS (Brazil) and Rio Claro-SP (Brazil), and then transferred to the laboratory for oviposition and development of the immature stages. Chemical analysis of cuticular compounds was performed by gas chromatography. Cuticular chemical profiles varied significantly between the two populations, as well as between developmental stages, supporting the use of these compounds as a complementary tool to help identify the species and its stages, along with geographical variability. This could greatly accelerate forensic investigations, eliminating the need to allow the fly larvae to develop until adult stage in order to confirm the species identity and sample origin. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Role of Law Enforcement Response and Microbial Forensics in Investigation of Bioterrorism

PubMed Central

Budowle, Bruce; Beaudry, Jodi A.; Barnaby, Neel G.; Giusti, Alan M.; Bannan, Jason D.; Keim, Paul

2007-01-01

The risk and threat of bioterrorism and biocrime have become a large concern and challenge for governments and society to enhance biosecurity. Law enforcement plays an important role in assessing and investigating activities involved in an event of bioterrorism or biocrime. Key to a successful biosecurity program is increased awareness and early detection of threats facilitated by an integrated network of responsibilities and capabilities from government, academic, private, and public assets. To support an investigation, microbial forensic sciences are employed to analyze and characterize forensic evidence with the goal of attribution or crime scene reconstruction. Two different molecular biology-based assays – real time polymerase chain reaction (PCR) and repetitive element PCR – are described and demonstrate how molecular biology tools may be utilized to aid in the investigative process. Technologies relied on by microbial forensic scientists need to be properly validated so that the methods used are understood and so that interpretation of results is carried out within the limitations of the assays. The three types of validation are preliminary, developmental, and internal. The first is necessary for rapid response when a threat is imminent or an attack has recently occurred. The latter two apply to implementation of routinely used procedures. PMID:17696298

Featured Invention: Laser Scaling Device

NASA Technical Reports Server (NTRS)

Dunn, Carol Anne

2008-01-01

In September 2003, NASA signed a nonexclusive license agreement with Armor Forensics, a subsidiary of Armor Holdings, Inc., for the laser scaling device under the Innovative Partnerships Program. Coupled with a measuring program, also developed by NASA, the unit provides crime scene investigators with the ability to shoot photographs at scale without having to physically enter the scene, analyzing details such as bloodspatter patterns and graffiti. This ability keeps the scene's components intact and pristine for the collection of information and evidence. The laser scaling device elegantly solved a pressing problem for NASA's shuttle operations team and also provided industry with a useful tool. For NASA, the laser scaling device is still used to measure divots or damage to the shuttle's external tank and other structures around the launchpad. When the invention also met similar needs within industry, the Innovative Partnerships Program provided information to Armor Forensics for licensing and marketing the laser scaling device. Jeff Kohler, technology transfer agent at Kennedy, added, "We also invited a representative from the FBI's special photography unit to Kennedy to meet with Armor Forensics and the innovator. Eventually the FBI ended up purchasing some units. Armor Forensics is also beginning to receive interest from DoD [Department of Defense] for use in military crime scene investigations overseas."

Considerations regarding the validation of chromatographic mass spectrometric methods for the quantification of endogenous substances in forensics.

PubMed

Hess, Cornelius; Sydow, Konrad; Kueting, Theresa; Kraemer, Michael; Maas, Alexandra

2018-02-01

The requirement for correct evaluation of forensic toxicological results in daily routine work and scientific studies is reliable analytical data based on validated methods. Validation of a method gives the analyst tools to estimate the efficacy and reliability of the analytical method. Without validation, data might be contested in court and lead to unjustified legal consequences for a defendant. Therefore, new analytical methods to be used in forensic toxicology require careful method development and validation of the final method. Until now, there are no publications on the validation of chromatographic mass spectrometric methods for the detection of endogenous substances although endogenous analytes can be important in Forensic Toxicology (alcohol consumption marker, congener alcohols, gamma hydroxy butyric acid, human insulin and C-peptide, creatinine, postmortal clinical parameters). For these analytes, conventional validation instructions cannot be followed completely. In this paper, important practical considerations in analytical method validation for endogenous substances will be discussed which may be used as guidance for scientists wishing to develop and validate analytical methods for analytes produced naturally in the human body. Especially the validation parameters calibration model, analytical limits, accuracy (bias and precision) and matrix effects and recovery have to be approached differently. Highest attention should be paid to selectivity experiments. Copyright © 2017 Elsevier B.V. All rights reserved.

Population-scale whole genome sequencing identifies 271 highly polymorphic short tandem repeats from Japanese population.

PubMed

Hirata, Satoshi; Kojima, Kaname; Misawa, Kazuharu; Gervais, Olivier; Kawai, Yosuke; Nagasaki, Masao

2018-05-01

Forensic DNA typing is widely used to identify missing persons and plays a central role in forensic profiling. DNA typing usually uses capillary electrophoresis fragment analysis of PCR amplification products to detect the length of short tandem repeat (STR) markers. Here, we analyzed whole genome data from 1,070 Japanese individuals generated using massively parallel short-read sequencing of 162 paired-end bases. We have analyzed 843,473 STR loci with two to six basepair repeat units and cataloged highly polymorphic STR loci in the Japanese population. To evaluate the performance of the cataloged STR loci, we compared 23 STR loci, widely used in forensic DNA typing, with capillary electrophoresis based STR genotyping results in the Japanese population. Seventeen loci had high correlations and high call rates. The other six loci had low call rates or low correlations due to either the limitations of short-read sequencing technology, the bioinformatics tool used, or the complexity of repeat patterns. With these analyses, we have also purified the suitable 218 STR loci with four basepair repeat units and 53 loci with five basepair repeat units both for short read sequencing and PCR based technologies, which would be candidates to the actual forensic DNA typing in Japanese population.

General unknown screening procedure for the characterization of human drug metabolites in forensic toxicology: applications and constraints.

PubMed

Sauvage, François-Ludovic; Picard, Nicolas; Saint-Marcoux, Franck; Gaulier, Jean-Michel; Lachâtre, Gérard; Marquet, Pierre

2009-09-01

LC coupled to single (LC-MS) and tandem (LC-MS/MS) mass spectrometry is recognized as the most powerful analytical tools for metabolic studies in drug discovery. In this article, we describe five cases illustrating the utility of screening xenobiotic metabolites in routine analysis of forensic samples using LC-MS/MS. Analyses were performed using a previously published LC-MS/MS general unknown screening (GUS) procedure developed using a hybrid linear IT-tandem mass spectrometer. In each of the cases presented, the presence of metabolites of xenobiotics was suspected after analyzing urine samples. In two cases, the parent drug was also detected and the metabolites were merely useful to confirm drug intake, but in three other cases, metabolite detection was of actual forensic interest. The presented results indicate that: (i) the GUS procedure developed is useful to detect a large variety of drug metabolites, which would have been hardly detected using targeted methods in the context of clinical or forensic toxicology; (ii) metabolite structure can generally be inferred from their "enhanced" product ion scan spectra; and (iii) structure confirmation can be achieved through in vitro metabolic experiments or through the analysis of urine samples from individuals taking the parent drug.

Automated Genotyping of a Highly Informative Panel of 40 Short Insertion-Deletion Polymorphisms Resolved in Polyacrylamide Gels for Forensic Identification and Kinship Analysis

PubMed Central

Pena, Heloisa B.; Pena, Sérgio D. J.

2012-01-01

Objective Short insertion-deletion polymorphisms (indels) are the second most abundant form of genetic variations in humans after SNPs. Since indel alleles differ in size, they can be typed using the same methodological approaches and equipment currently utilized for microsatellite genotyping, which is already operational in forensic laboratories. We have previously shown that a panel of 40 carefully chosen indels has excellent potential for forensic identification, with combined probability of identity (match probability) of 7.09 × 10–17 for Europeans. Methods We describe the successful development of a multiplex system for genotyping the 40-indel panel in long thin denaturing polyacrylamide gels with silver staining. We also demonstrate that the system can be easily fully automated with a simple large scanner and commercial software. Results and Conclusion The great advantage of the new system of typing is its very low cost. The total price for laboratory equipment is less than EUR 10,000.-, and genotyping of an individual patient will cost less than EUR 10.- in supplies. Thus, the 40-indel panel described here and the newly developed ‘low-tech’ analysis platform represent useful new tools for forensic identification and kinship analysis in laboratories with limited budgets, especially in developing countries. PMID:22851937

Investigation of quartz grain surface textures by atomic force microscopy for forensic analysis.

PubMed

Konopinski, D I; Hudziak, S; Morgan, R M; Bull, P A; Kenyon, A J

2012-11-30

This paper presents a study of quartz sand grain surface textures using atomic force microscopy (AFM) to image the surface. Until now scanning electron microscopy (SEM) has provided the primary technique used in the forensic surface texture analysis of quartz sand grains as a means of establishing the provenance of the grains for forensic reconstructions. The ability to independently corroborate the grain type classifications is desirable and provides additional weight to the findings of SEM analysis of the textures of quartz grains identified in forensic soil/sediment samples. AFM offers a quantitative means of analysis that complements SEM examination, and is a non-destructive technique that requires no sample preparation prior to scanning. It therefore has great potential to be used for forensic analysis where sample preservation is highly valuable. By taking quantitative topography scans, it is possible to produce 3D representations of microscopic surface textures and diagnostic features for examination. Furthermore, various empirical measures can be obtained from analysing the topography scans, including arithmetic average roughness, root-mean-square surface roughness, skewness, kurtosis, and multiple gaussian fits to height distributions. These empirical measures, combined with qualitative examination of the surfaces can help to discriminate between grain types and provide independent analysis that can corroborate the morphological grain typing based on the surface textures assigned using SEM. Furthermore, the findings from this study also demonstrate that quartz sand grain surfaces exhibit a statistically self-similar fractal nature that remains unchanged across scales. This indicates the potential for a further quantitative measure that could be utilised in the discrimination of quartz grains based on their provenance for forensic investigations. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Eliminate background interference from latent fingerprints using ultraviolet multispectral imaging

NASA Astrophysics Data System (ADS)

Huang, Wei; Xu, Xiaojing; Wang, Guiqiang

2014-02-01

Fingerprints are the most important evidence in crime scene. The technology of developing latent fingerprints is one of the hottest research areas in forensic science. Recently, multispectral imaging which has shown great capability in fingerprints development, questioned document detection and trace evidence examination is used in detecting material evidence. This paper studied how to eliminate background interference from non-porous and porous surface latent fingerprints by rotating filter wheel ultraviolet multispectral imaging. The results approved that background interference could be removed clearly from latent fingerprints by using multispectral imaging in ultraviolet bandwidth.

Air Land Sea Bulletin. Issue No. 2013-1

DTIC Science & Technology

2013-01-01

face, finger- print, iris , DNA, and palm print. Biometric capabilities may achieve enabling effects such as the ability to separate, identify...to obtain forensic-quality fingerprints, latent fingerprints, iris images, photos, and other biometric data. Figure 1. SEEK II ALSB 2013-1 12...logical and biographical contextual data of POIs and matches fingerprints and iris images against an internal biomet- rics enrollment database. The

Postmortem 31P magnetic resonance spectroscopy of the skeletal muscle: α-ATP/Pi ratio as a forensic tool?

PubMed

Schmidt, Tony M; Wang, Zhiyue J; Keller, Sarah; Heinemann, Axel; Acar, Suzan; Graessner, Joachim; Schoennagel, Bjoern P; Adam, Gerhard; Fischer, Roland; Yamamura, Jin

2014-09-01

Phosphor magnetic resonance spectroscopy ((31)P MRS) is an established method for metabolic examinations of resting and exercising skeletal muscle. So far, there are few MRS investigations of human corpses. The aim of this study was to investigate the temporal postmortem pattern of phosphor metabolites in the adductor magnus muscle and to check the value of MRS as a forensic tool, especially for the determination of the time of death. Eight corpses, died of natural cause, were examined (5 males, 3 females; age: 73±7 y, weight 65.8±15.9 kg). A control group of 3 subjects (2 males, 1 female, mean age: 51±24 y, range: 24-69 y, mean body weight: 84.0±16.5 kg) was examined at a single time point as well. (31)P MRS was performed on a 1.5 T MRI (TR 700 ms, TE 0.35 ms, averages 256, flip angle 90°). A standard (31)P/(1)H heart/liver coil was employed (receiver coil diameter 12 cm). The (31)P MRS scans were repeated in intervals of 1 h over a period from 4.5 to 24 h postmortem (p.m.). The core temperature was rectally measured throughout the MRI examination. The mean core temperature decreased from 36.0°C to 25.7°C. In vivo and ex vivo spectra showed characteristic differences, especially the PCr metabolite was no longer detectable after 10 h p.m. The α-ATP/Pi ratio decreased with time from 0.445 to 0.032 over 24 h p.m. There is a characteristic postmortem time pattern of the phosphor metabolites. Especially the acquired α-ATP/Pi ratio could be described by a significant exponential time course (r(2)=0.92, p<0.001). (31)P MRS might be added to the postmortem imaging methods. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Accessible biometrics: A frustrated total internal reflection approach to imaging fingerprints.

PubMed

Smith, Nathan D; Sharp, James S

2017-05-01

Fingerprints are widely used as a means of identifying persons of interest because of the highly individual nature of the spatial distribution and types of features (or minuta) found on the surface of a finger. This individuality has led to their wide application in the comparison of fingerprints found at crime scenes with those taken from known offenders and suspects in custody. However, despite recent advances in machine vision technology and image processing techniques, fingerprint evidence is still widely being collected using outdated practices involving ink and paper - a process that can be both time consuming and expensive. Reduction of forensic service budgets increasingly requires that evidence be gathered and processed more rapidly and efficiently. However, many of the existing digital fingerprint acquisition devices have proven too expensive to roll out on a large scale. As a result new, low-cost imaging technologies are required to increase the quality and throughput of the processing of fingerprint evidence. Here we describe an inexpensive approach to digital fingerprint acquisition that is based upon frustrated total internal reflection imaging. The quality and resolution of the images produced are shown to be as good as those currently acquired using ink and paper based methods. The same imaging technique is also shown to be capable of imaging powdered fingerprints that have been lifted from a crime scene using adhesive tape or gel lifters. Copyright © 2017 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

Generating classes of 3D virtual mandibles for AR-based medical simulation.

PubMed

Hippalgaonkar, Neha R; Sider, Alexa D; Hamza-Lup, Felix G; Santhanam, Anand P; Jaganathan, Bala; Imielinska, Celina; Rolland, Jannick P

2008-01-01

Simulation and modeling represent promising tools for several application domains from engineering to forensic science and medicine. Advances in 3D imaging technology convey paradigms such as augmented reality (AR) and mixed reality inside promising simulation tools for the training industry. Motivated by the requirement for superimposing anatomically correct 3D models on a human patient simulator (HPS) and visualizing them in an AR environment, the purpose of this research effort was to develop and validate a method for scaling a source human mandible to a target human mandible within a 2 mm root mean square (RMS) error. Results show that, given a distance between 2 same landmarks on 2 different mandibles, a relative scaling factor may be computed. Using this scaling factor, results show that a 3D virtual mandible model can be made morphometrically equivalent to a real target-specific mandible within a 1.30 mm RMS error. The virtual mandible may be further used as a reference target for registering other anatomic models, such as the lungs, on the HPS. Such registration will be made possible by physical constraints among the mandible and the spinal column in the horizontal normal rest position.

NanoSIMS analysis of Bacillus spores for forensics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, P K; Davisson, M L; Velsko, S P

2010-02-23

The threat associated with the potential use of radiological, nuclear, chemical and biological materials in terrorist acts has resulted in new fields of forensic science requiring the application of state-of-the-science analytical techniques. Since the anthrax letter attacks in the United States in the fall of 2001, there has been increased interest in physical and chemical characterization of bacterial spores. While molecular methods are powerful tools for identifying genetic differences, other methods may be able to differentiate genetically identical samples based on physical and chemical properties, as well as provide complimentary information, such as methods of production and approximate date ofmore » production. Microanalysis has the potential to contribute significantly to microbial forensics. Bacillus spores are highly structured, consisting of a core, cortex, coat, and in some species, an exosporium. This structure provides a template for constraining elemental abundance differences at the nanometer scale. The primary controls on the distribution of major elements in spores are likely structural and physiological. For example, P and Ca are known to be abundant in the spore core because that is where P-rich nucleic acids and Cadipicolinic acid are located, respectively. Trace elements are known to bind to the spore coat but the controls on these elements are less well understood. Elemental distributions and abundances may be directly related to spore production, purification and stabilization methodologies, which are of particular interest for forensic investigation. To this end, we are developing a high-resolution secondary ion mass spectrometry method using a Cameca NanoSIMS 50 to study the distribution and abundance of trace elements in bacterial spores. In this presentation we will review and compare methods for preparing and analyzing samples, as well as review results on the distribution and abundance of elements in bacterial spores. We use NanoSIMS to directly image samples as well as depth profile samples. The directly imaged samples are sectioned to present a flat surface for analysis. We use focused ion beam (FIB) milling to top-cut individual spores to create flat surfaces for NanoSIMS analysis. Depth profiling can be used on whole spores, which are consumed in the process of analysis. The two methods generate comparable results, with the expected distribution of P and Ca. Ca-compatible elements, such as Mg and Mn, are found to follow the distribution of Ca. The distribution of other elements will be discussed. We envision the first application of this methodology will be to sample matching for trace samples. Towards this end, we are generating a baseline data set for samples produced by multiple laboratories. Preliminary results suggest that this method provides significant probative value for identifying samples produced by the same method in the same laboratory, as well as coming from the same initial production run. The results of this study will be presented.« less

The Defense Threat Reduction Agency's Technical Nuclear Forensics Research and Development Program

NASA Astrophysics Data System (ADS)

Franks, J.

2015-12-01

The Defense Threat Reduction Agency (DTRA) Technical Nuclear Forensics (TNF) Research and Development (R&D) Program's overarching goal is to design, develop, demonstrate, and transition advanced technologies and methodologies that improve the interagency operational capability to provide forensics conclusions after the detonation of a nuclear device. This goal is attained through the execution of three focus areas covering the span of the TNF process to enable strategic decision-making (attribution): Nuclear Forensic Materials Exploitation - Development of targeted technologies, methodologies and tools enabling the timely collection, analysis and interpretation of detonation materials.Prompt Nuclear Effects Exploitation - Improve ground-based capabilities to collect prompt nuclear device outputs and effects data for rapid, complementary and corroborative information.Nuclear Forensics Device Characterization - Development of a validated and verified capability to reverse model a nuclear device with high confidence from observables (e.g., prompt diagnostics, sample analysis, etc.) seen after an attack. This presentation will outline DTRA's TNF R&D strategy and current investments, with efforts focusing on: (1) introducing new technical data collection capabilities (e.g., ground-based prompt diagnostics sensor systems; innovative debris collection and analysis); (2) developing new TNF process paradigms and concepts of operations to decrease timelines and uncertainties, and increase results confidence; (3) enhanced validation and verification (V&V) of capabilities through technology evaluations and demonstrations; and (4) updated weapon output predictions to account for the modern threat environment. A key challenge to expanding these efforts to a global capability is the need for increased post-detonation TNF international cooperation, collaboration and peer reviews.

Applicability of T1-weighted MRI in the assessment of forensic age based on the epiphyseal closure of the humeral head.

PubMed

Ekizoglu, Oguzhan; Inci, Ercan; Ors, Suna; Kacmaz, Ismail Eralp; Basa, Can Doruk; Can, Ismail Ozgur; Kranioti, Elena F

2018-05-26

This work investigates the value of magnetic resonance imaging analysis of proximal epiphyseal fusion in research examining the growth and development of the humerus and its potential utility in establishing forensic age estimation. In this study, 428 proximal humeral epiphyses (patient age, 12-30 years) were evaluated with T1-weighted turbo spin echo (T1 TSE) sequences in coronal oblique orientation on shoulder MRI images. A scoring system was created following a combination of the Schmeling and Kellinghaus methods. Spearman's rank correlation analysis revealed a significant positive relationship between age and ossification stage of the proximal humeral epiphysis (all subjects: rho = 0.664, p < 0.001; males: 0.631, p < 0.001; females: rho = 0.651, p < 0.001). The intra- and inter-observer reliability assessed using Cohen's kappa statistic was κ = 0.898 and κ = 0.828, respectively. The earliest age of epiphysis closure was 17 years for females and 18 years for males. MRI of the proximal humeral epiphysis can be considered advantageous for forensic age estimation of living individuals in a variety of situations, ranging from monitoring public health to estimating the age of illegal immigrants/asylum seekers, minors engaged in criminal activities, and illegal participants in competitive sports, without the danger of radiation exposure.

Bayesian networks of age estimation and classification based on dental evidence: A study on the third molar mineralization.

PubMed

Sironi, Emanuele; Pinchi, Vilma; Pradella, Francesco; Focardi, Martina; Bozza, Silvia; Taroni, Franco

2018-04-01

Not only does the Bayesian approach offer a rational and logical environment for evidence evaluation in a forensic framework, but it also allows scientists to coherently deal with uncertainty related to a collection of multiple items of evidence, due to its flexible nature. Such flexibility might come at the expense of elevated computational complexity, which can be handled by using specific probabilistic graphical tools, namely Bayesian networks. In the current work, such probabilistic tools are used for evaluating dental evidence related to the development of third molars. A set of relevant properties characterizing the graphical models are discussed and Bayesian networks are implemented to deal with the inferential process laying beyond the estimation procedure, as well as to provide age estimates. Such properties include operationality, flexibility, coherence, transparence and sensitivity. A data sample composed of Italian subjects was employed for the analysis; results were in agreement with previous studies in terms of point estimate and age classification. The influence of the prior probability elicitation in terms of Bayesian estimate and classifies was also analyzed. Findings also supported the opportunity to take into consideration multiple teeth in the evaluative procedure, since it can be shown this results in an increased robustness towards the prior probability elicitation process, as well as in more favorable outcomes from a forensic perspective. Copyright © 2018 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Characterization of microsatellite loci in Phormia regina towards expanding molecular applications in forensic entomology.

PubMed

Farncombe, K M; Beresford, D; Kyle, C J

2014-07-01

Forensic entomology involves the use of insects and arthropods to assist a spectrum of medico-criminal investigations that range from identifying cases of abuse, corpse movements, and most commonly, post mortem interval estimates. Many of these applications focus on the use of blowflies given their predicable life history characteristics in their larval stages. Molecular tools have become increasingly important in the unambiguous identification of larval blowfly species, however, these same tools have the potential to broaden the array of molecular applications in forensic entomology to include individual identifications and population assignments. Herein, we establish a microsatellite profiling system for the blowfly, Phormiaregina (Diptera: Calliphoridae). The goal being to create a system to identify the population genetic structure of this species and subsequently establish if these data are amenable to identifying corpse movements based on the geographic distribution of specific genetic clusters of blowflies. Using next generation sequencing technology, we screened a partial genomic DNA sequence library of P.regina, searching for di-, tetra-, and penta-nucleotide microsatellite loci. We identified and developed primers for 84 highly repetitive segments of DNA, of which 14 revealed consistent genotypes and reasonable levels of genetic variation (4-26 alleles/locus; heterozygosity ranged from 0.385 to 0.909). This study provides the first step in assessing the utility of microsatellite markers to track the movements and sources of corpses via blowflies. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Firefly: an optical lithographic system for the fabrication of holographic security labels

NASA Astrophysics Data System (ADS)

Calderón, Jorge; Rincón, Oscar; Amézquita, Ricardo; Pulido, Iván.; Amézquita, Sebastián.; Bernal, Andrés.; Romero, Luis; Agudelo, Viviana

2016-03-01

This paper introduces Firefly, an optical lithography origination system that has been developed to produce holographic masters of high quality. This mask-less lithography system has a resolution of 418 nm half-pitch, and generates holographic masters with the optical characteristics required for security applications of level 1 (visual verification), level 2 (pocket reader verification) and level 3 (forensic verification). The holographic master constitutes the main core of the manufacturing process of security holographic labels used for the authentication of products and documents worldwide. Additionally, the Firefly is equipped with a software tool that allows for the hologram design from graphic formats stored in bitmaps. The software is capable of generating and configuring basic optical effects such as animation and color, as well as effects of high complexity such as Fresnel lenses, engraves and encrypted images, among others. The Firefly technology gathers together optical lithography, digital image processing and the most advanced control systems, making possible a competitive equipment that challenges the best technologies in the industry of holographic generation around the world. In this paper, a general description of the origination system is provided as well as some examples of its capabilities.

Memory Forensics: Review of Acquisition and Analysis Techniques

DTIC Science & Technology

2013-11-01

Management Overview Processes running on modern multitasking operating systems operate on an abstraction of RAM, called virtual memory [7]. In these systems...information such as user names, email addresses and passwords [7]. Analysts also use tools such as WinHex to identify headers or other suspicious data within

Risk Assessment with Adolescent Sex Offenders

ERIC Educational Resources Information Center

Christodoulides, T. E.; Richardson, G.; Graham, F.; Kennedy, P. J.; Kelly, T. P.

2005-01-01

The paper describes an evaluation of a risk assessment tool's effectiveness in distinguishing adolescent sexual offenders who had committed further sexual offences from those who had not. The sample consisted of 50 male adolescent sexual offenders referred to a forensic outpatient service within a healthcare setting. The adolescents within the…

How Linguistic Frames Affect Motivational Profiles and the Roles of Quantitative versus Qualitative Research Strategies

ERIC Educational Resources Information Center

Yeager, Joseph; Sommer, Linda

2005-01-01

The combined tools of psycholinguistics and systems analysis have produced advances in motivational profiling resulting in numerous applications to behavioral engineering. Knowing the way people frame their motive offers leverage in causing behavior change ranging from persuasive marketing campaigns, forensic profiling, individual psychotherapy,…

FINGERPRINT ANALYSIS OF CONTAMINANT DATA: A FORENSIC TOOL FOR EVALUATING ENVIRONMENTAL CONTAMINATION

EPA Science Inventory

Several studies have been conducted on behalf of the U .S. Environmental Protection Agency (EPA) to identify detection monitoring parameters for specific industries.1,2,3,4,5 One outcome of these studies was the evolution of an empirical multi-variant contaminant fingerprinting p...

First all-in-one diagnostic tool for DNA intelligence: genome-wide inference of biogeographic ancestry, appearance, relatedness, and sex with the Identitas v1 Forensic Chip.

PubMed

Keating, Brendan; Bansal, Aruna T; Walsh, Susan; Millman, Jonathan; Newman, Jonathan; Kidd, Kenneth; Budowle, Bruce; Eisenberg, Arthur; Donfack, Joseph; Gasparini, Paolo; Budimlija, Zoran; Henders, Anjali K; Chandrupatla, Hareesh; Duffy, David L; Gordon, Scott D; Hysi, Pirro; Liu, Fan; Medland, Sarah E; Rubin, Laurence; Martin, Nicholas G; Spector, Timothy D; Kayser, Manfred

2013-05-01

When a forensic DNA sample cannot be associated directly with a previously genotyped reference sample by standard short tandem repeat profiling, the investigation required for identifying perpetrators, victims, or missing persons can be both costly and time consuming. Here, we describe the outcome of a collaborative study using the Identitas Version 1 (v1) Forensic Chip, the first commercially available all-in-one tool dedicated to the concept of developing intelligence leads based on DNA. The chip allows parallel interrogation of 201,173 genome-wide autosomal, X-chromosomal, Y-chromosomal, and mitochondrial single nucleotide polymorphisms for inference of biogeographic ancestry, appearance, relatedness, and sex. The first assessment of the chip's performance was carried out on 3,196 blinded DNA samples of varying quantities and qualities, covering a wide range of biogeographic origin and eye/hair coloration as well as variation in relatedness and sex. Overall, 95 % of the samples (N = 3,034) passed quality checks with an overall genotype call rate >90 % on variable numbers of available recorded trait information. Predictions of sex, direct match, and first to third degree relatedness were highly accurate. Chip-based predictions of biparental continental ancestry were on average ~94 % correct (further support provided by separately inferred patrilineal and matrilineal ancestry). Predictions of eye color were 85 % correct for brown and 70 % correct for blue eyes, and predictions of hair color were 72 % for brown, 63 % for blond, 58 % for black, and 48 % for red hair. From the 5 % of samples (N = 162) with <90 % call rate, 56 % yielded correct continental ancestry predictions while 7 % yielded sufficient genotypes to allow hair and eye color prediction. Our results demonstrate that the Identitas v1 Forensic Chip holds great promise for a wide range of applications including criminal investigations, missing person investigations, and for national security purposes.

The use of clinical CCT images in the forensic examination of closed head injuries.

PubMed

Bauer, M; Polzin, S; Patzelt, D

2004-04-01

The forensic evaluation of clinical cranial computed tomographies (CCT) frequently is the only reliable source of morphological evidence in head injuries when the injured individual survives or when death is delayed and autopsy findings are characterized by secondary changes. We have reviewed 21 cases where clinical CCT examinations were used to establish a medico-legal diagnosis. In 18 cases falls (n = 13) could be distinguished from blows (n = 5) due to the presence and/or absence of coup and contrecoup lesions and linear or depressed skull fractures. In two cases the striking object could be identified by digital superimposition. The minimum number of blows could be determined in 1 case. Only in 3 remaining cases the results were inconclusive. In our experience, CCT scans provide an important source of information for the forensic expert. To have unbiased access to these information, it is useful to evaluate the CT scans personally which requires a basic knowledge of traumatic changes found on radiographs.

VIRTOPSY - the Swiss virtual autopsy approach.

PubMed

Thali, Michael J; Jackowski, Christian; Oesterhelweg, Lars; Ross, Steffen G; Dirnhofer, Richard

2007-03-01

The aim of the VIRTOPSY project () is utilizing radiological scanning to push low-tech documentation and autopsy procedures in a world of high-tech medicine in order to improve scientific value, to increase significance and quality in the forensic field. The term VIRTOPSY was created from the terms virtual and autopsy: Virtual is derived from the Latin word 'virtus', which means 'useful, efficient and good'. Autopsy is a combination of the old Greek terms 'autos' (=self) and 'opsomei' (=I will see). Thus autopsy means 'to see with ones own eyes'. Because our goal was to eliminate the subjectivity of "autos", we merged the two terms virtual and autopsy - deleting "autos" - to create VIRTOPSY. Today the project VIRTOPSY combining the research topics under one scientific umbrella, is characterized by a trans-disciplinary research approach that combines Forensic Medicine, Pathology, Radiology, Image Processing, Physics, and Biomechanics to an international scientific network. The paper will give an overview of the Virtopsy change process in forensic medicine.