Bioaccumulation of organochlorines in crows from an indian open waste dumping site: evidence for direct transfer of dioxin-like congeners from the contaminated soil.

PubMed

Watanabe, Michio X; Iwata, Hisato; Watanabe, Mafumi; Tanabe, Shinsuke; Subramanian, Annamalai; Yoneda, Kumiko; Hashimoto, Takuma

2005-06-15

To assess the significance of waste dumping sites as a source of chemical contamination to ecosystems, we analyzed the residue levels of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs), and other organochlorines in the breast muscle of crows from a dumping site in the south of Chennai city, South India. Crows from the dumping site contained significantly higher total TEQs (60 +/- 27 pg/g lipid wt) than those from the reference sites (26 +/- 18 pg/g lipid wt). Especially, certain dioxin-like coplanar PCB congeners (Co-PCBs), such as CB-77 and CB-105, whose source is commercial PCBs,were significantly higher in crows from the dumping site than those from the reference sites. Profiles of PCDDs/DFs and Co-PCBs in crows from the dumping site were similar to those of soil at the same site, which was confirmed by principal component analysis. Furthermore, significant positive correlations were obtained between the congener-specific bioconcentration factors (BCFs) of PCDDs/DFs estimated from concentrations in crows and soil from the dumping site and the theoretical BCFs calculated from water-particle and lipid-water partitioning coefficients. On the other hand, the estimated BCFs had significant negative correlations with the molecular weight of PCDDs/DFs, indicating that molecular size limits their bioaccumulation. These results suggest that dioxin-like congeners in the soil of the dumping site were transferred directly to the crows through the ingestion of on-site garbage contaminated with soil, rather than through trophic transfer in the ecosystem. The present study provides insight into the ecological impacts of dumping sites.

Between-Subject Variability in the Breaking Continuous Flash Suppression Paradigm: Potential Causes, Consequences, and Solutions

PubMed Central

Gayet, Surya; Stein, Timo

2017-01-01

A recent focus in the field of consciousness research involves investigating the propensity of initially non-conscious visual information to gain access to consciousness. A critical tool for measuring conscious access is the so-called breaking continuous flash suppression paradigm (b-CFS). In this paradigm, a high contrast dynamic pattern is presented to one eye, thereby temporarily suppressing a target stimulus that is presented to the other eye. The time it takes for observers to report (e.g., the location of) the initially suppressed stimulus provides a measure of conscious access. Typical observations in b-CFS studies include the finding that upright faces are released from suppression faster than inverted faces, and the finding that stimuli that match the current content of visual working memory are released from suppression faster than mismatching stimuli. Interestingly, the extent to which observers exhibit these effects varies extensively (in the range of hundreds of milliseconds). By re-analyzing existing datasets and a new dataset we establish that the difference in RTs between conditions in b-CFS tasks (i.e., the effect of interest) is highly correlated with participants' overall suppression durations, and with their trial-to-trial variability in RTs. We advocate the usage of a simple latency- normalization method, which (1) removes the between-subject variability in suppression duration from the effect of interest, while (2) providing distributions of RT differences that are better suited for parametric testing. We next compare this latency-normalization method to two other transformations that are widely applied on within-subject RT data (z-transformations and log-transformations). Finally, we tentatively discuss how trial-to-trial variability and overall suppression duration might relate to prolonged phases of shallow suppression that are more prone to modulations of conscious access. PMID:28396645

Effect of mycorrhizal fungi on the phytoextraction of weathered p,p-DDE by Cucurbita pepo.

PubMed

White, Jason C; Ross, Daniel W; Gent, Martin P N; Eitzer, Brian D; Mattina, Maryjane Incorvia

2006-10-11

Field experiments were conducted to assess the impact of inoculation with mycorrhizal fungi on the accumulation of weathered p,p'-DDE from soil by three cultivars of zucchini (Cucurbita pepo spp. pepo cv Costata Romanesco, Goldrush, Raven). Three commercially available mycorrhizal products (BioVam, Myco-Vam, INVAM) were inoculated into the root system of the zucchini seedlings at planting. In agreement with our previous findings, plants not inoculated with fungi accumulated large but variable amounts of contaminant, with root bioconcentration factors (BCFs, ratio of p,p'-DDE, on a dry weight basis, in the root to that in the soil) ranging from 10 to 48 and stem BCFs ranging from 5.5 to 11. The total amount of contaminant phytoextracted during the 62 day growing season ranged from 0.72-2.9%. The effect of fungal inoculation on the release of weathered p,p'-DDE from soil and on the subsequent uptake of the parent compound by zucchini appeared to vary at the cultivar level. For Goldrush, fungal inoculation generally decreased tissue BCFs but because of slightly larger biomass, did not significantly impact the percent contaminant phytoextracted. Alternatively, for Costata, BioVam and Myco-Vam generally enhanced p,p'-DDE accumulation from soil, and increased the amount of contaminant phytoextracted by up to 34%. For Raven, BioVam reduced contaminant uptake whereas Myco-Vam and INVAM increased contaminant phytoextraction by 53 and 60%, respectively. The data show that fungal inoculation may significantly increase the remedial potential of C. pepo ssp. pepo. The apparent cultivar specific response to mycorrhizal inoculation is unexpected and the subject of ongoing investigation.

Using Fugacity Ratios to Compare Laboratory and Field Measured Bioaccumulation Endpoint Metrics

EPA Science Inventory

Bioconcentration (BCF) testing provides useful insights into the behavior of chemicals in the aquatic ecosystem that are useful for modeling and other applications. BCFs are also often used for chemical hazard screening and risk assessment. The question arises how well can we ext...

Comparison of Laboratory Measured BCFs, BMFs, and BSAFs to Field Measured BAFs, BMFs, and BSAFs

EPA Science Inventory

A series of workshops on bioaccumulation science and issues have been held since 2005, and the foci of these past workshops were1) Bioaccumulation Data Sources, 2) In Vitro/ADME (absorption, distribution, metabolism, and excretion) in Bioaccumulation Assessments, and 3) Bioaccumu...

Comparative assessment of heavy metals content during the composting and vermicomposting of Municipal Solid Waste employing Eudrilus eugeniae.

PubMed

Soobhany, Nuhaa; Mohee, Romeela; Garg, Vinod Kumar

2015-05-01

This study was undertaken to have comparative assessment of heavy metals content during composting and vermicomposting processing of Municipal Solid Waste (MSW). Six scenarios were set up in which three experiments were for composting (controls) denoted as S1 for food waste, S2 for paper waste and S3 for yard waste and the corresponding replicates for vermicomposting processes were S4, S5 and S6. Vermicomposting caused significant reduction in Cd (43.3-73.5%), Cr (11.3-52.8%), Cu (18.9-62.5%), Co (21.4-47.6%), Zn (34.6%) and Ni (19.9-49.6%) compared to composting which showed a progressive increase. Addition of worms did not show any effect on Fe and Mn, most probably from the genesis of organic-bound complexes. The efficacy of utilizing Eudrilus eugeniae was indicated by the high values of bioconcentration factors (BCFs) which were in the order of Cd>Ni>Cu>Co>Cr>Zn and the increase amount of these metals in the earthworms' tissue after the vermicomposting processes. Different values of BCFs were obtained for different heavy metals and this accounted that earthworms exert different metabolic mechanisms. Regression analysis of the reduction percentages (R) in relation to BCF showed that RCdtot.S6, RCrtot.S5 and RCutot.S6 were significantly correlated with BCFCd.S6, BCFCr.S5 and BCFCu.S6 respectively. Thus, in comparison to simple composting processes, data analysis suggested the feasibility of inoculating E. eugeniae to MSW in order to mitigate the content of toxic heavy metals. Copyright © 2015 Elsevier Ltd. All rights reserved.

Can an aquatic macrophyte bioaccumulate glyphosate? Development of a new method of glyphosate extraction in Ludwigia peploides and watershed scale validation.

PubMed

Pérez, Débora Jesabel; Okada, Elena; Menone, Mirta Luján; Costa, José Luis

2017-10-01

Glyphosate is intensively used in agricultural fields and it is frequently detected in non-target wetland ecosystems. The floating hydrophyte Ludwigia peploides is widely distributed in American streams and it is an abundant species. Therefore, our objectives were (1) to establish and validate an extraction and quantification methodology for glyphosate in L. peploides and (2) to evaluate the role of this species as a potential glyphosate biomonitor in an agricultural watershed. We developed a new method of glyphosate extraction from leaves of L. peploides. The method recovery was 117± 20% and the matrix effect 20%. To validate the method using environmental samples, plants of L. peploides were collected in March 2016 from eight monitoring sites of El Crespo stream. Surface water and sediment samples were collected at the same time to measure glyphosate and to calculate bioconcentration factors (BCFs) and biota-sediment accumulation factors (BSAFs). Glyphosate was detected in 94.11% in leaves, the concentrations ranging between 4 and 108 μg/kg. Glyphosate was detected in surface water and sediments at 75% and 100% of the samples, at concentrations that varied between 0 and 1.7 μg/L and 5-10.50 μg/kg dry weight, respectively. The mean BCFs and BSAFs were 88.10 L/Kg and 7.61, respectively. These results indicate that L. peploides bioaccumulates glyphosate mainly bioavailable in the surface water. In this sense, L. peploides could be used as a biomonitor organism to evaluate glyphosate levels in freshwater aquatic ecosystems because, in addition to its capacity to bioconcentrate glyphosate, it is easy to sample and it has a restricted mobility. Copyright © 2017 Elsevier Ltd. All rights reserved.

Characteristics of nonylphenol and bisphenol A accumulation by fish and implications for ecological and human health.

PubMed

Lee, Ching-Chang; Jiang, Ling-Ying; Kuo, Yi-Ling; Chen, Chung-Yu; Hsieh, Chia-Yi; Hung, Chung-Feng; Tien, Chien-Jung

2015-01-01

Fish populations constitute an important part of aquatic ecosystems. Thus, their accumulation of nonylphenol (NP) and bisphenol A (BPA) may pose risks to ecosystems and human health. This study analyzed the concentrations of NP and BPA in four types of fishes (i.e., wild/farmed freshwater fishes and wild/farmed marine fishes). Wild freshwater fishes contained higher concentrations of NP and BPA than the other three types of fishes. The concentrations of NP in the wild freshwater fishes ranged from 1.01 to 277 μg/kg ww, with bioconcentration factors (BCFs) and biota-sediment accumulation factors (BSAFs) ranging from 74.0 to 2.60 × 10(4)L/kg and from 0.003 to 18.3, respectively. The wild freshwater fishes contained relatively low amounts of BPA, varying from ND to 25.2 μg/kg ww, with the BCFs and BSAFs ranging from 1.00 to 274L/kg and from 0.003 to 3.40, respectively. Five fish species particularly showed high BCFs and BSAFs, indicating that they could be an important source of NP for higher trophic levels, most likely resulting in ecological risks. The demersal fishes showed a greater ability to accumulate NP than the pelagic ones. The fact that the 95th percentile values of the risk quotient (RQ) for NP and BPA were higher than the acceptable threshold indicated that these two compounds would have adverse effects on aquatic organisms in Taiwanese rivers. The consumption of wild marine fishes had the highest 95th percentile values of hazard quotient (HQ) for NP and BPA among the four types of fishes, particularly for the population aged 0-3 years. However, the 95th percentile values of HQ for NP and BPA were all less than 1, suggesting that exposure to NP and BPA through fish consumption posed no remarkable risk to human health in Taiwan. Copyright © 2014 Elsevier B.V. All rights reserved.

Uptake, biotransformation and elimination of selected pharmaceuticals in a freshwater invertebrate measured using liquid chromatography tandem mass spectrometry.

PubMed

Miller, Thomas H; Bury, Nicolas R; Owen, Stewart F; Barron, Leon P

2017-09-01

Methods were developed to assess uptake and elimination kinetics in Gammarus pulex of nine pharmaceuticals (sulfamethazine, carbamazepine, diazepam, temazepam, trimethoprim, warfarin, metoprolol, nifedipine and propranolol) using targeted LC-MS/MS to determine bioconcentration factors (BCFs) using a 96 h toxicokinetic exposure and depuration period. The derived BCFs for these pharmaceuticals did not trigger any regulatory thresholds and ranged from 0 to 73 L kg -1 (sulfamethazine showed no bioconcentration). Metabolism of chemicals can affect accurate BCF determination through parameterisation of the kinetic models. The added selectivity of LC-MS/MS allowed us to develop confirmatory methods to monitor the biotransformation of propranolol, carbamazepine and diazepam in G. pulex. Varying concentrations of the biotransformed products; 4-hydroxypropranolol sulphate, carbamazepine-10,11-epoxide, nordiazepam, oxazepam and temazepam were measured following exposure of the precursor compounds. For diazepam, the biotransformation product nordiazepam was present at higher concentrations than the parent compound at 94 ng g -1 dw. Overall, the results indicate that pharmaceutical accumulation is low in these freshwater amphipods, which can potentially be explained by the rapid biotransformation and excretion. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Phylogeny and size differentially influence dissolved Cd and Zn bioaccumulation parameters among closely related aquatic insects.

PubMed

Poteat, Monica D; Buchwalter, David B

2014-05-06

Evolutionarily distinct lineages can vary markedly in their accumulation of, and sensitivity to, contaminants. However, less is known about variability among closely related species. Here, we compared dissolved Cd and Zn bioaccumulation in 19 species spanning two species-rich aquatic insect families: Ephemerellidae (order Ephemeroptera (mayflies)), generalized to be metal sensitive, and Hydropsychidae (order Trichoptera (caddisflies)), generalized to be metal tolerant. Across all species, Zn and Cd uptake rate constants (k(u)s), efflux rate constants (k(e)s) and bioconcentration factors (BCFs) strongly covaried, suggesting that these metals share transport pathways in these distinct lineages. K(u)s and BCFs were substantially larger in Ephemerellidae than in Hydropsychidae, whereas k(e)s did not dramatically differ between the two families. Body size played an important role in driving ku differences among species, but had no influence on k(e)s. While familial differences in metal bioconcentration were striking, each family exhibited tremendous variability in all bioaccumulation parameters. At finer levels of taxonomic resolution (within families), phylogeny did not account for differences in metal bioaccumulation. These findings suggest that intrafamily variability can be profound and have important practical implications in that we need to better understand how well "surrogate species" represent their fellow congeners and family members.

Uptake of 17α-ethynylestradiol and triclosan in pinto bean, Phaseolus vulgaris.

PubMed

Karnjanapiboonwong, Adcharee; Chase, Darcy A; Cañas, Jaclyn E; Jackson, William A; Maul, Jonathan D; Morse, Audra N; Anderson, Todd A

2011-07-01

Pharmaceuticals and personal care products (PPCPs) have emerged as a group of potential environmental contaminants of concern. PPCPs in soil may enter terrestrial food webs via plant uptake. We evaluated uptake of 17α-ethynylestradiol (EE2) and triclosan in bean plants (Phaseolus vulgaris) grown in sand and soil. The extent of uptake and accumulation of EE2 and triclosan in plants grown in sand was higher than in plants grown in soil. In sand (conditions of maximum contaminant bioavailability), bioconcentration factors (BCFs) of EE2 and triclosan in roots (based on dry weights) were 1424 and 16,364, respectively, whereas BCFs in leaves were 55 for EE2 and 85 for triclosan. In soil, the BCF of EE2 decreased from 154 in the first week to 32 in the fourth week while it fluctuated in leaves from 18 to 20. The BCF for triclosan in plants grown in soil increased over time to 12 in roots and 8 in leaves. These results indicate that the potential for uptake and accumulation of PPCPs in plants exists. This trophic transfer pathway should be considered when assessing exposure to certain PPCPs, particularly with the use of recycled wastewater for irrigation. Copyright © 2011 Elsevier Inc. All rights reserved.

Model-based evaluation of struvite recovery from an in-line stripper in a BNR process (BCFS).

PubMed

Hao, X D; van Loosdrecht, M C M

2006-01-01

Phosphate removal and recovery can be combined in BNR processes. This may be realised by struvite precipitation from the supernatant of the sludge in anaerobic compartments. This can be beneficial for either improving bio-P removal effluent quality or lowering the influent COD/P ratio required for bio-P removal. For this reason, a patented BNR process, BCFS, was developed and applied in The Netherlands. Several questions relating to P-recovery and behaviour of the system remain unclear and need to be ascertained. For this purpose, a modelling technique was employed in this study. With the help of a previous developed model describing carbon oxidation and nutrient removal, three cases were fully simulated. The simulations demonstrated that there was an optimal stripping flow rate and P-recovery would increase in costs and bio-P activity might be negatively affected due to decreased bio-P efficiency if this value was exceeded. The simulations indicated that the minimal COD(biod)/P ratio required for the effluent standard (1 g P/m3) could be lowered from 20 to 10 with 36% of P-recovery. A simulation with dynamic inflow revealed that the dynamic influent loads affected slightly the anaerobic supernatant phosphate concentration but the effluent phosphate concentration would not be affected with regular P-recovery.

Uptake, depuration, and bioconcentration of two pharmaceuticals, roxithromycin and propranolol, in Daphnia magna.

PubMed

Ding, Jiannan; Lu, Guanghua; Liu, Jianchao; Yang, Haohan; Li, Yi

2016-04-01

The objective of the present study was to investigate the uptake, depuration, and bioconcentration of two pharmaceuticals, roxithromycin (ROX) and propranolol (PRP), in Daphnia magna via aqueous exposure. Additionally, dietary and pH effects on the bioconcentration of two pharmaceuticals in daphnia were studied. During the 24-h uptake phase followed by the 24-h depuration phase, the uptake rate constants (k(u)) of ROX for daphnia were 9.21 and 2.77 L kg(-1) h(-1), corresponding to the exposure concentrations of 5 and 100 μg L(-1), respectively; For PRP at the nominal concentrations of 5 and 100 μg L(-1), k(u) were 2.29 and 0.99 L kg(-1) h(-1), respectively. The depuration rate constants (k(d)) of ROX in daphnia, at the exposure concentrations of 5 and 100 μg L(-1), were 0.0985 and 0.207 h(-1), respectively; while those of PRP were 0.0276 and 0.0539 h(-1) for the nominal concentrations of 5 and 100 μg L(-1), respectively. With the decreasing exposure concentrations, the bioconcentration factors (BCFs) in daphnia ranged from 13.4 to 93.5 L kg(-1) for ROX, and 18.4 to 83.0 L kg(-1) for PRP, revealing the considerable accumulation potential of these two pharmaceuticals. Moreover, after 6h exposure, the body burdens of ROX and PRP in dead daphnia were 4.98-6.14 and 7.42-12.9 times higher than those in living daphnia, respectively, implying that body surface sorption dominates the bioconcentration of the two pharmaceuticals in daphnia. In addition, the presence of algal food in the media could significantly elevate the kd values for both ROX and PRP, thereby restraining their bioconcentration in daphnia. A pH-dependent bioconcentration study revealed that the bioconcentration of the two pharmaceuticals in daphnia increased with increasing pH levels, which ranged from 7 to 9. Finally, a model was developed to estimate the relationships between pH and the BCFs of the two pharmaceuticals in zooplankton. The predicted values based on this model were highly consistent with wildlife monitoring data, implying that this model will be useful in identifying the bioaccumulation risks that pharmaceuticals pose to zooplankton. Copyright © 2015 Elsevier Inc. All rights reserved.

Accumulation of heavy metals in soil-crop systems: a review for wheat and corn.

PubMed

Wang, Shiyu; Wu, Wenyong; Liu, Fei; Liao, Renkuan; Hu, Yaqi

2017-06-01

The health risks arising from heavy metal pollution (HMP) in agricultural soils have attracted global attention, and research on the accumulation of heavy metals in soil-plant systems is the basis for human health risk assessments. This review studied the accumulation of seven typical heavy metals-Cd, Cr, As, Pb, Hg, Cu, and Zn-in soil-corn and soil-wheat systems. The findings indicated that, in general, wheat was more likely to accumulate heavy metals than corn. Bioconcentration factor (BCF) of the seven heavy metals in wheat and corn grains decreased exponentially with their average concentrations in soil. The seven heavy metals were ranked as follows, in ascending order of accumulation in corn grains: Pb < Cr < Zn < As < Cu < Cd

Comparative Studies on the Toxicokinetics of Benzo[a]pyrene in Pinctada martensii and Perna viridis.

PubMed

Wang, Haihua; Cui, Lili; Cheng, Huamin; Zhang, Yu; Diao, Xiaoping; Wang, Jun

2017-05-01

Research on the kinetics of Benzo[a]pyrene (B[a]P) bioaccumulation in the clam Pinctada martensii and mussel Perna viridis showed that the initial rate of uptake was directly related to the PAH concentrations in the ambient environment. The uptake and depuration rate constants were different at the four B[a]P exposure levels, which indicated that the toxicokinetic rate constants mainly depended on the exposure levels of pollutants to the environment. In addition, the uptake rate constants of B[a]P were higher than the depuration rate constants in the entire experiment. The comparison demonstrated that mussels release B[a]P more rapidly than clams. The bioconcentration factors (BCFs) of B[a]P varied from 3335 to 12892 in the clam and 2373-6235 in the mussel. These findings on the bioaccumulation kinetics for petroleum hydrocarbons, in association with the critical body residue, will be valuable when choosing sensitive organisms to assess the potential ecotoxicological risk to the marine environment.

Comparison of screening-level and Monte Carlo approaches for wildlife food web exposure modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pastorok, R.; Butcher, M.; LaTier, A.

1995-12-31

The implications of using quantitative uncertainty analysis (e.g., Monte Carlo) and site-specific tissue residue data for wildlife exposure modeling were examined with data on trace elements at the Clark Fork River Superfund Site. Exposure of white-tailed deer, red fox, and American kestrel was evaluated using three approaches. First, a screening-level exposure model was based on conservative estimates of exposure parameters, including estimates of dietary residues derived from bioconcentration factors (BCFs) and soil chemistry. A second model without Monte Carlo was based on site-specific data for tissue residues of trace elements (As, Cd, Cu, Pb, Zn) in key dietary species andmore » plausible assumptions for habitat spatial segmentation and other exposure parameters. Dietary species sampled included dominant grasses (tufted hairgrass and redtop), willows, alfalfa, barley, invertebrates (grasshoppers, spiders, and beetles), and deer mice. Third, the Monte Carlo analysis was based on the site-specific residue data and assumed or estimated distributions for exposure parameters. Substantial uncertainties are associated with several exposure parameters, especially BCFS, such that exposure and risk may be greatly overestimated in screening-level approaches. The results of the three approaches are compared with respect to realism, practicality, and data gaps. Collection of site-specific data on trace elements concentrations in plants and animals eaten by the target wildlife receptors is a cost-effective way to obtain realistic estimates of exposure. Implications of the results for exposure and risk estimates are discussed relative to use of wildlife exposure modeling and evaluation of remedial actions at Superfund sites.« less

[Phytoremediation of mercury and cadmium polluted wetland by Arundo donax].

PubMed

Han, Zhiping; Hu, Xiaobin; Hu, Zhenghai

2005-05-01

With a pot culture of simulated mercury (Hg) and cadmium (Cd)-polluted wetland, this paper studied the capability of Arundo donax in accumulating these heavy metals, and their distribution in the plant. The results showed that after grown in a 101 mg.kg(-1) Hg-polluted wetland for 8 months, the Hg-concentrating capability of Arundo donax was in order of root > stem > leaf, and the Hg concentration in its aboveground parts was 200 +/- 20 mg.kg(-1) (DW); while in the case of 115 mg.kg(-1) Cd-pollution, the Cd-concentrating capability was in order of leaf > root > stem, and the Cd concentration in leaf was 160 +/- 26 mg.kg(-1) (DW). The heavy metals concentration in Arundo donax organs increased with its growth time, being 30%-50% higher for 8 months than for 4 months. The BCF (Bio-concentration factor) decreased with increasing heavy metals concentration. In polluted wetland, the BCFs of Hg by the leaf and stem were 1.9 and 2.1, and those of Cd were 1.5 and 0.3, respectively; while in unpolluted wetland, the concentration of Hg and Cd was 6.8 and 8.5 mg.kg(-1), the BCFs of Hg by the leaf and stem were 6.8 and 12.2, and those of Cd were 7.0 and 2.7, respectively. It was indicated that Arundo donax not only had the characters of large biomass, exuberant root, and good adaptability, but also exhibited high tolerance and concentrating capability to Cd and Hg.

Cadmium tolerance and accumulation in cultivars of a high-biomass tropical tree (Averrhoa carambola) and its potential for phytoextraction.

PubMed

Li, J T; Liao, B; Lan, C Y; Ye, Z H; Baker, A J M; Shu, W S

2010-01-01

Averrhoa carambola is a high-biomass tropical tree that has been identified as a Cd accumulator. In the present study, field survey, pot, and hydroponic experiments were conducted to investigate the variation of Cd tolerance and accumulation in cultivars of A. carambola as well as its potential for phytoextraction. In the field survey, it was found that concentrations of Cd in aerial tissues of A. carambola varied greatly among sites and cultivars. The Cd bioconcentration factors (BCFs) and Cd removals by the field-grown A. carambola differed significantly among sites but not among cultivars. Nonetheless, all four carambola cultivars investigated were able to accumulate considerably high concentrations of Cd in their shoots, which indicated that the 4-yr-old carambola stands could remove 0.3 to 51.8% of the total Cd content in the top 20-cm soil layer. When cultured in Cd-spiked soils, the carambola cultivar Hua-Di always showed higher Cd tolerance than the other cultivars; however, this tendency was not confirmed by hydroponic experiment. The Cd BCFs of cultivar Thailand grown in soils with 6 and 12 mg Cd kg(-1) were highest among cultivars, whereas this trend was reversed at 120 mg Cd kg(-1) treatment. Nevertheless, the pot- and hydroponics-grown carambola cultivars generally showed higher capacities to tolerate and accumulate Cd, compared with the control species. The present results indicate that a strong ability to tolerate and accumulate Cd seems to be a trait at the species level in A. carambola, although some degree of variances in both Cd tolerance and accumulation exists among cultivars.

Bioconcentration model for non-ionic, polar, and ionizable organic compounds in amphipod.

PubMed

Chen, Ciara Chun; Kuo, Dave Ta Fu

2018-05-01

The present study presents a bioconcentration model for non-ionic, polar, and ionizable organic compounds in amphipod based on first-order kinetics. Uptake rate constant k 1 is modeled as logk1=10.81logKOW + 0.15 (root mean square error [RMSE] = 0.52). Biotransformation rate constant k M is estimated using an existing polyparameter linear free energy relationship model. Respiratory elimination k 2 is calculated as modeled k 1 over theoretical biota-water partition coefficient K biow considering the contributions of lipid, protein, carbohydrate, and water. With negligible contributions of growth and egestion over a typical amphipod bioconcentration experiment, the bioconcentration factor (BCF) is modeled as k 1 /(k M  + k 2 ) (RMSE = 0.68). The proposed model performs well for non-ionic organic compounds (log K OW range = 3.3-7.62) within 1 log-unit error margin. Approximately 12% of the BCFs are underpredicted for polar and ionizable compounds. However, >50% of the estimated k 2 values are found to exceed the total depuration rate constants. Analyses suggest that these excessive k 2 values and underpredicted BCFs reflect underestimation in K biow , which may be improved by incorporating exoskeleton as a relevant partitioning component and refining the membrane-water partitioning model. The immediate needs to build up high-quality experimental k M values, explore the sorptive role of exoskeleton, and investigate the prevalence of k 2 overestimation in other bioconcentration models are also identified. The resulting BCF model can support, within its limitations, the ecotoxicological and risk assessment of emerging polar and ionizable organic contaminants in aquatic environments and advance the science of invertebrate bioaccumulation. Environ Toxicol Chem 2018;37:1378-1386. © 2018 SETAC. © 2018 SETAC.

Specific profiles of perfluorinated compounds in surface and drinking waters and accumulation in mussels, fish, and dolphins from southeastern Brazil.

PubMed

Quinete, Natalia; Wu, Qian; Zhang, Tao; Yun, Se Hun; Moreira, Isabel; Kannan, Kurunthachalam

2009-10-01

Despite the concern over widespread distribution of perfluorinated compounds (PFCs) even in sparsely populated regions of the world, few studies have reported their occurrence in South America. In this study, PFCs were measured in Rio de Janeiro State in southeast Brazil: in drinking water from various districts in the State, in river water and tucuxi dolphins from the Paraiba do Sul River, several species of fish from the State, and mussels from Guanabara Bay. Liver, kidney, and muscle from fishes were analyzed to enable an understanding of the tissue distribution of PFCs. PFOS, PFOA, and PFHxS were detected in all drinking water samples in concentration ranges of 0.58-6.70, 0.35-2.82, and 0.15-1.00 ng L(-1), respectively. The profiles of PFCs in drinking water from Brazil (with PFOS concentrations comparable to or higher than those of PFOA) were different from the profiles that have been reported for other countries. In fish, concentrations of PFOS were, in general, higher in liver than in muscle. Concentrations of PFOA in livers of fish were similar to or lower than fish muscle tissue concentrations. PFOS and PFOA were found in brown mussels from Guanabara Bay. Bioconcentration factors (BCFs) of PFOA calculated for mussels were higher than the BCFs calculated for fishes. Elevated concentrations of PFUnDA (mean: 109+/-17.4 ng g(-1) wet weight) were found in mussels from certain locations within Guanabara Bay. Although PFCs were detected in all types of samples analyzed, the concentrations were generally lower than the concentrations reported for Japan and the USA.

Tissue-specific bioaccumulation, depuration and metabolism of 4,4'-dichlorodiphenyl sulfide in the freshwater mussel Anodonta woodiana.

PubMed

Zhang, Xuesheng; Fang, Bingxin; Wang, Tantan; Liu, Hui; Feng, Mingbao; Qin, Li; Zhang, Rui

2018-06-17

Polychlorinated diphenyl sulfides (PCDPSs) are considered as a class of sulfur-containing dioxin-like pollutants with ubiquitous occurrence in natural waters and potential ecotoxicity to aquatic organisms. However, to date, no information is available regarding the bioaccumulation and biotransformation of PCDPSs in aquatic species. In this study, the uptake and depuration kinetics of 4,4'-dichlorodiphenyl sulfide (4,4'-di-CDPS) in the freshwater mussel Anodonta woodiana were investigated through semi-static exposure. The uptake rates (k 1 ), depuration rates (k 2 ), biological half-lives (t 1/2 ) and tissue-specific bioconcentration factors (BCFs) of 4,4'-di-CDPS in the gill, liver and muscle were measured in the range of 0.509-21.734 L d -1  g -1 d.w., 0.083-0.221 d -1 , 3.14-8.35 d and 3.662 × 10 3 -124.979 × 10 3  L kg -1 l.w., respectively. With the increase in exposure dose, the values of k 1 and BCFs were significantly reduced, indicating that low-dose exposure to 4,4'-di-CDPS could lead to more severe bioaccumulation. Based on the analysis of mass spectra of the extracted liver samples, the structures of four metabolites of 4,4'-di-CDPS were identified. Moreover, the levels of these metabolites were also quantitatively measured. The proposed metabolic pathways of 4,4'-di-CDPS in mussel liver included sulfur-oxidation, dechlorination and methoxylation. Comparatively, sulfur-oxidation was the predominant metabolic pathway of 4,4'-di-CDPS in the liver of A. woodiana. These results provide valuable data and fill the information gap on the bioaccumulation and metabolism of PCDPSs in freshwater species. Copyright © 2018 Elsevier B.V. All rights reserved.

Adverse effects and bioconcentration of chromium in two freshwater rotifer species.

PubMed

Hernández-Ruiz, Esmeralda; Alvarado-Flores, Jesús; Rubio-Franchini, Isidoro; Ventura-Juárez, Javier; Rico-Martínez, Roberto

2016-09-01

Bioaccumulation of trivalent (CrIII) and hexavalent chromium (CrVI), and its adverse effects were studied in two rotifer species: Brachionus calyciflorus (two different strains), and Lecane quadridentata. Median Lethal Concentration (LC50) at 24 h of both species showed that CrVI is highly toxic: LC50 ranges from 4.7 × 10(-5) to 4 × 10(-6) mg L(-1)), compared with CrIII: LC50 ranges from 0.64 to 1.279 mg L(-1). Using the LC50 as an exposure concentration, and using atomic absorption, the bioconcentration factor (BCF) was obtained and BCFs of rotifers exposed to CrIII are four orders of magnitude lower than BCFs of rotifers exposed to CrVI. The effect of Cr on the elemental composition of the two species of rotifers in their structures by X-ray microanalysis by energy dispersion showed that Cr is found in intoxicated rotifers, but not in control rotifers. The basal immunoreactivity to metallothioneins is greater in B. calyciflorus than L. quadridentata. The immunoreactivity to metallothioneins decreases in B. calyciflorus when is exposed to CrIII, in contrast in L. quadridentata the immunoreactivity to metallothioneins increase when is exposed to CrIII, and the immunoreactivity to CrVI in L. quadridentata decrease. A mechanism is proposed in which the harder lorica of L. quadridentata acts as a barrier and accumulator of CrVI, and allows for attenuating responses like metallothionein production in L. quadridentata. Instead, in B. calyciflorus the lack of a harder lorica allows for deeper penetration of CrVI, and no time to produce attenuating measures. Copyright © 2016 Elsevier Ltd. All rights reserved.

Object Localization Does Not Imply Awareness of Object Category at the Break of Continuous Flash Suppression

PubMed Central

Kobylka, Florian; Persike, Malte; Meinhardt, Günter

2017-01-01

In continuous flash suppression (CFS), a dynamic noise masker, presented to one eye, suppresses conscious perception of a test stimulus, presented to the other eye, until the suppressed stimulus comes to awareness after few seconds. But what do we see breaking the dominance of the masker in the transition period? We addressed this question with a dual-task in which observers indicated (i) whether the test object was left or right of the fixation mark (localization) and (ii) whether it was a face or a house (categorization). As done recently Stein et al. (2011a), we used two experimental varieties to rule out confounds with decisional strategy. In the terminated mode, stimulus and masker were presented for distinct durations, and the observers were asked to give both judgments at the end of the trial. In the self-paced mode, presentation lasted until the observers responded. In the self-paced mode, b-CFS durations for object categorization were about half a second longer than for object localization. In the terminated mode, correct categorization rates were consistently lower than correct detection rates, measured at five duration intervals ranging up to 2 s. In both experiments we observed an upright face advantage compared to inverted faces and houses, as concurrently reported in b-CFS studies. Our findings reveal that more time is necessary to enable observers judging the nature of the object, compared to judging that there is “something other” than the noise which can be localized, but not recognized. This suggests gradual transitions in the first break of CFS. Further, the results imply that suppression is such that no cues to object identity are conveyed in potential “leaks” of CFS (Gelbard-Sagiv et al., 2016). PMID:28663728

Bioconcentration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barron, M.G.

1990-11-01

Bioconcentration is the process of accumulation of water-borne chemicals by fish and other aquatic animals through nondietary routes. A proportionality constant relating the concentration of a chemical in water to its concentration in the aquatic animal at steady-state equilibrium is the bioconcentration factor (BCF). The purpose of this paper is to critically evaluate the hypothesis that hydrophobicity is the principal determinant of bioconcentration in aquatic animals and examine the dependence of bioconcentration on species, body size, and environmental factors. BCFs for a variety of chemical classes are evaluated for their conformity to the hydrophobicity model of bioconcentration, and an alternativemore » conceptual model of bioconcentration incorporating animal physiology is presented.« less

Phytoextraction of metals by Erigeron canadensis L. from fly ash landfill of power plant "Kolubara".

PubMed

Krgović, Rada; Trifković, Jelena; Milojković-Opsenica, Dušanka; Manojlović, Dragan; Marković, Marijana; Mutić, Jelena

2015-07-01

The objectives of this study were to determine the concentrations of Pb, Cd, As, Cr, Cu, Co, Ni, Zn, Ba, Fe, Al and Ag in Erigeron canadensis L. growing on fly ash landfill of power plant "Kolubara", Serbia. The content of each element was determined in every part of plant separately (root, stalk and inflorescence) and correlated with the content of elements in each phase of sequential extraction of fly ash. In order to ambiguously select the factors that are able to decidedly characterize the particular part of plant, principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) were performed. The bioconcentration factors and translocation factors for each metal were calculated in order to determine the feasibility of the use of plant E. canadensis L. for phytoremediation purpose. There were strong positive correlations between metals in every part of plant samples, and metals from pseudo total form of sequential extraction indicate that the bioavailability of elements in fly ash is similarly correlated with total form. Retained Al, Fe, Cr and Co in the root indicate its suitability for phytostabilization. This plant takes up Cd and Zn from the soil (bioconcentration factors (BCFs) greater than 1), transporting them through the stalk into the inflorescence (translocation factors (TFs) higher than 1). Regarding its dominance in vegetation cover and abundance, E. canadensis L. can be considered adequate for phytoextraction of Cd and Zn from coal ash landfills at Kolubara.

Validation of an electrothermal atomization atomic absorption spectrometry method for quantification of total chromium and chromium(VI) in wild mushrooms and underlying soils.

PubMed

Figueiredo, Estela; Soares, M Elisa; Baptista, Paula; Castro, Marisa; Bastos, M Lourdes

2007-08-22

An ETAAS method was validated to quantify total Cr and Cr(VI) in mushrooms and the underlying soils. The method includes a sample pretreatment for total Cr dissolution using a wet acid digestion procedure and a selective alkaline extraction for Cr(VI). The limits of detection were, expressed in microg/L, 0.15 and 0.17 for total Cr and Cr(VI), respectively. The linearity ranges under the optimized conditions were 0.15-25.0 and 0.17-20.0 microg/L for total Cr and Cr(VI), respectively. The limits of quantification were, expressed in microg/g of dry weight, 0.0163 and 0.0085 for total and hexavalent chromium, respectively. The precision of the instrumental method for total Cr and Cr(VI) was lower than 1.6%, and for the analytical method, it was lower than 10%. The accuracy of the method for Cr(VI) quantification was evaluated by the standard additions method, with the recoveries being higher than 90% for all of the added concentrations. For total Cr, certified reference materials (lichen CRM 482 and soil sample NCS ZC73001) were used. An interference study was also carried out in a mushroom simulated matrix, and it was verified that the deviations of the expected values were lower than 4.0% for both total Cr and Cr(VI). The validated method was applied to the evaluation of total Cr and Cr(VI) in 34 wild mushrooms and 34 respective underlying soil samples collected in two different regions of Portugal (Beira Interior and TrAs-os-Montes), with different locations regarded as noncontaminated or contaminated areas. The species were identified by a mycologist and subdivided into 10 genera and 15 species: Amanita (rubescens, muscaria, and ponderosa), Boletus (regius), Lactarius (deliciosus, vellereus, and piperatus), Suillus (granulatus and luteus), Tricholoma (acerbum), Agaricus (sylvicola), Volvariella (gloiocephala), Lecopaxillus (giganteus), Macrolepiota (procera), and Psilocybe (fascicularis). The mean values found for total Cr were 1.14 and 1.11 microg/g of dry weight, and for Cr(VI), the mean values were 0.103 and 0.143 microg/g of dry weight for cap and stalk, respectively. For soils, the mean concentrations found were, for total Cr, 84.0 microg/g and, for Cr(VI), 0.483 microg/g. The bioconcentration factors (BCFs) based on dry weight for cap and stalk were determined, and the values found, for both total Cr and Cr(VI), were always <1, although for hexavalent chromium, the BCFs were 10 times higher than for total chromium.

Bioaccumulation of lipophilic substances in fish early life stages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petersen, G.I.; Kristensen, P.

1998-07-01

Accumulation of {sup 14}C-labeled polycyclic aromatic hydrocarbons, naphthalene, phenanthrene, pyrene, and benzo(a)pyrene and polychlorinated biphenyl (PCB) congeners PCB 31 and PCB 105 with a log octanol/water partition coefficient (K{sub ow}) range from 3.37 to 6.5 was investigated in eggs and larvae of zebra fish (Brachydanio rerio), and in larvae of cod (Gadus morhua), herring (Clupea harengus), and turbot (Scophthalmus maximus). Significant differences in the uptake and elimination rate constants between eggs and larvae of zebra fish were seen. The low rate of uptake and the lower elimination rate of eggs did, however, lead to bioconcentration factors (BCFs) comparable to thosemore » for larvae. As biotransformation of xenobiotics in embryonic and larval stages was indicated to be insignificant compared to juvenile/adult stages, body burdens of readily biotransformed chemicals may be higher in fish early life stages. Because weight and lipid content did not differ much between the investigated species, the main reason for the variability in BCFs between marine species and freshwater species was considered to be caused by differences in exposure temperatures that affect the degree of biotransformation. Due to the smaller size of larvae and thus an increased total surface of the membranes per unit fish weight, steady-state conditions were reached at a faster r/ate in early life stages than in juvenile/adult life stages. The lipid-normalized bioconcentration factors (BCF{sub L}) were linearly related to K{sub ow} but BCF{sub L} was, in general, higher than K{sub ow}, indicating that octanol is not a suitable surrogate for fish lipids. Differences in bioconcentration kinetics between larvae and juvenile/adult life stages are considered to be the main reason for the higher sensitivity, with respect to external effect concentrations, generally obtained for early life stages of fish.« less

PBT assessment under REACH: Screening for low aquatic bioaccumulation with QSAR classifications based on physicochemical properties to replace BCF in vivo testing on fish.

PubMed

Nendza, Monika; Kühne, Ralph; Lombardo, Anna; Strempel, Sebastian; Schüürmann, Gerrit

2018-03-01

Aquatic bioconcentration factors (BCFs) are critical in PBT (persistent, bioaccumulative, toxic) and risk assessment of chemicals. High costs and use of more than 100 fish per standard BCF study (OECD 305) call for alternative methods to replace as much in vivo testing as possible. The BCF waiving scheme is a screening tool combining QSAR classifications based on physicochemical properties related to the distribution (hydrophobicity, ionisation), persistence (biodegradability, hydrolysis), solubility and volatility (Henry's law constant) of substances in water bodies and aquatic biota to predict substances with low aquatic bioaccumulation (nonB, BCF<2000). The BCF waiving scheme was developed with a dataset of reliable BCFs for 998 compounds and externally validated with another 181 substances. It performs with 100% sensitivity (no false negatives), >50% efficacy (waiving potential), and complies with the OECD principles for valid QSARs. The chemical applicability domain of the BCF waiving scheme is given by the structures of the training set, with some compound classes explicitly excluded like organometallics, poly- and perfluorinated compounds, aromatic triphenylphosphates, surfactants. The prediction confidence of the BCF waiving scheme is based on applicability domain compliance, consensus modelling, and the structural similarity with known nonB and B/vB substances. Compounds classified as nonB by the BCF waiving scheme are candidates for waiving of BCF in vivo testing on fish due to low concern with regard to the B criterion. The BCF waiving scheme supports the 3Rs with a possible reduction of >50% of BCF in vivo testing on fish. If the target chemical is outside the applicability domain of the BCF waiving scheme or not classified as nonB, further assessments with in silico, in vitro or in vivo methods are necessary to either confirm or reject bioaccumulative behaviour. Copyright © 2017 Elsevier B.V. All rights reserved.

A Bayesian approach to assessing the uncertainty in estimating bioconcentration factors in earthworms--the example of quinoxyfen.

PubMed

Fragoulis, George; Merli, Annalisa; Reeves, Graham; Meregalli, Giovanna; Stenberg, Kristofer; Tanaka, Taku; Capri, Ettore

2011-06-01

Quinoxyfen is a fungicide of the phenoxyquinoline class used to control powdery mildew, Uncinula necator (Schw.) Burr. Owing to its high persistence and strong sorption in soil, it could represent a risk for soil organisms if they are exposed at ecologically relevant concentrations. The objective of this paper is to predict the bioconcentration factors (BCFs) of quinoxyfen in earthworms, selected as a representative soil organism, and to assess the uncertainty in the estimation of this parameter. Three fields in each of four vineyards in southern and northern Italy were sampled over two successive years. The measured BCFs varied over time, possibly owing to seasonal changes and the consequent changes in behaviour and ecology of earthworms. Quinoxyfen did not accumulate in soil, as the mean soil concentrations at the end of the 2 year monitoring period ranged from 9.16 to 16.0 µg kg⁻¹ dw for the Verona province and from 23.9 to 37.5 µg kg⁻¹ dw for the Taranto province, with up to eight applications per season. To assess the uncertainty of the BCF in earthworms, a probabilistic approach was used, firstly by building with weighted bootstrapping techniques a generic probabilistic density function (PDF) accounting for variability and incompleteness of knowledge. The generic PDF was then used to derive prior distribution functions, which, by application of Bayes' theorem, were updated with the new measurements and a posterior distribution was finally created. The study is a good example of probabilistic risk assessment. The means of mean and SD posterior estimates of log BCFworm (2.06, 0.91) are the 'best estimate values'. Further risk assessment of quinoxyfen and other phenoxyquinoline fungicides and realistic representative scenarios for modelling exercises required for future authorization and post-authorization requirements can now use this value as input. Copyright © 2011 Society of Chemical Industry.

Bioconcentration factors and plant-water partition coefficients of munitions compounds in barley.

PubMed

Torralba-Sanchez, Tifany L; Kuo, Dave T F; Allen, Herbert E; Di Toro, Dominic M

2017-12-01

Plants growing in the soils at military ranges and surrounding locations are exposed, and potentially able to uptake, munitions compounds (MCs). The extent to which a compound is transferred from the environment into organisms such as plants, referred to as bioconcentration, is conventionally measured through uptake experiments with field/synthetic soils. Multiple components/phases that vary among different soil types and affect the bioavailability of the MC, however, hinder the ability to separate the effects of soil characteristics from the MC chemical properties on the resulting plant bioconcentration. To circumvent the problem, this work presents a protocol to measure steady state bioconcentration factors (BCFs) for MCs in barley (Hordeum vulgare L.) using inert laboratory sand rather than field/synthetic soils. Three MCs: 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (2,4-DNT), and 2,4-dinitroanisole (2,4-DNAN), and two munition-like compounds (MLCs): 4-nitroanisole (4-NAN) and 2-methoxy-5-nitropyridine (2-M-5-NPYNE) were evaluated. Approximately constant plant biomass and exposure concentrations were achieved within a one-month period that produced steady state log BCF values: 0.62 ± 0.02, 0.70 ± 0.03, 1.30 ± 0.06, 0.52 ± 0.03, and 0.40 ± 0.05 L kg plant dwt -1 for TNT, 2,4-DNT, 2,4-DNAN, 4-NAN, and 2-M-5-NPYNE, respectively. Furthermore, results suggest that the upper-bounds of the BCFs can be estimated within an order of magnitude by measuring the partitioning of the compounds between barley biomass and water. This highlights the importance of partition equilibrium as a mechanism for the uptake of MCs and MLCs by barley from interstitial water. The results from this work provide chemically meaningful data for prediction models able to estimate the bioconcentration of these contaminants in plants. Copyright © 2017 Elsevier Ltd. All rights reserved.

Quantitative Index and Abnormal Alarm Strategy Using Sensor-Dependent Vibration Data for Blade Crack Identification in Centrifugal Booster Fans

PubMed Central

Chen, Jinglong; Sun, Hailiang; Wang, Shuai; He, Zhengjia

2016-01-01

Centrifugal booster fans are important equipment used to recover blast furnace gas (BFG) for generating electricity, but blade crack faults (BCFs) in centrifugal booster fans can lead to unscheduled breakdowns and potentially serious accidents, so in this work quantitative fault identification and an abnormal alarm strategy based on acquired historical sensor-dependent vibration data is proposed for implementing condition-based maintenance for this type of equipment. Firstly, three group dependent sensors are installed to acquire running condition data. Then a discrete spectrum interpolation method and short time Fourier transform (STFT) are applied to preliminarily identify the running data in the sensor-dependent vibration data. As a result a quantitative identification and abnormal alarm strategy based on compound indexes including the largest Lyapunov exponent and relative energy ratio at the second harmonic frequency component is proposed. Then for validation the proposed blade crack quantitative identification and abnormality alarm strategy is applied to analyze acquired experimental data for centrifugal booster fans and it has successfully identified incipient blade crack faults. In addition, the related mathematical modelling work is also introduced to investigate the effects of mistuning and cracks on the vibration features of centrifugal impellers and to explore effective techniques for crack detection. PMID:27171083

Uptake and Disposition of Select Pharmaceuticals by Bluegill Exposed at Constant Concentrations in a Flow-Through Aquatic Exposure System.

PubMed

Zhao, Jian-Liang; Furlong, Edward T; Schoenfuss, Heiko L; Kolpin, Dana W; Bird, Kyle L; Feifarek, David J; Schwab, Eric A; Ying, Guang-Guo

2017-04-18

The increasing use of pharmaceuticals has led to their subsequent input into and release from wastewater treatment plants, with corresponding discharge into surface waters that may subsequently exert adverse effects upon aquatic organisms. Although the distribution of pharmaceuticals in surface water has been extensively studied, the details of uptake, internal distribution, and kinetic processing of pharmaceuticals in exposed fish have received less attention. For this research, we investigated the uptake, disposition, and toxicokinetics of five pharmaceuticals (diclofenac, methocarbamol, rosuvastatin, sulfamethoxazole, and temazepam) in bluegill sunfish (Lepomis macrochirus) exposed to environmentally relevant concentrations (1000-4000 ng L -1 ) in a flow-through exposure system. Temazepam and methocarbamol were consistently detected in bluegill biological samples with the highest concentrations in bile of 4, 940, and 180 ng g -1 , respectively, while sulfamethoxazole, diclofenac, and rosuvastatin were only infrequently detected. Over 30-day exposures, the relative magnitude of mean concentrations of temazepam and methocarbamol in biological samples generally followed the order: bile ≫ gut > liver and brain > muscle, plasma, and gill. Ranges of bioconcentration factors (BCFs) in different biological samples were 0.71-3960 and 0.13-48.6 for temazepam and methocarbamol, respectively. Log BCFs were statistically positively correlated to pH adjusted log K ow (that is, log D ow ), with the strongest relations for liver and brain (r 2 = 0.92 and 0.99, respectively), implying that bioconcentration patterns of ionizable pharmaceuticals depend on molecular status, that is, whether a pharmaceutical is un-ionized or ionized at ambient tissue pH. Methocarbamol and temazepam underwent rapid uptake and elimination in bluegill biological compartments with uptake rate constants (K u ) and elimination rate constants (K e ) at 0.0066-0.0330 h -1 and 0.0075-0.0384 h -1 , respectively, and half-lives at 18.1-92.4 h. Exposure to mixtures of diclofenac, methocarbamol, sulfamethoxazole, and temazepam had little or no influence on the uptake and elimination rates, suggesting independent multiple uptake and disposition behaviors of pharmaceuticals by fish would occur when exposed to effluent-influenced surface waters.

Can an aquatic macrophyte bioaccumulate glyphosate? A watershed scale study using a non-target hydrophyte Ludwigia peploides

NASA Astrophysics Data System (ADS)

Perez, Debora; Okada, Elena; Menone, Mirta; Aparicio, Virginia; Costa, Jose Luis

2017-04-01

The hydrophyte Ludwigia peploides is widely distributed in South America streams, and therefore, it can be used as a biomonitor for pesticides used in agricultural production. Glyphosate is one of the main pesticides used in Argentina. This has resulted in its occurrence in non-target wetland ecosystems. The objectives of this study were to: 1) establish and validate an extraction and quantification methodology for glyphosate in L.peploides plants, and 2) evaluated the role of this species as a glyphosate biomonitor in the agricultural watershed of the El Crespo stream. For the first objective, we collected plant material in the field. The leaves were dissected and oven dried at 60° C, grinded and sieved through a 0.5 mm mesh. Different solutions were tested for the extraction step. Labeled glyphosate was used as an internal standard to evaluate the recovery rate and the matrix effect of the different extraction methods. Glyphosate was derivatized with FMOC-Cl and then quantified by ultra-performance liquid chromatography (UPLC) coupled to a mass tandem spectrometer (MS/MS). The method based on an aqueous phase extraction step 0.01 mg/mL of activated carbon as a clean-up to decrease the matrix interference had a recovery of 117 ± 20% and the matrix effect was less than 20%. This method was used to analyze the glyphosate levels in L.peploides in the El Crespo stream. For the second objective, plants of L.peploides were collected on March 2016 in eight monitoring sites of the stream from the headwaters to the stream mouth. Surface water and sediments samples were collected at the same time to calculate the bioconcentration factors (BCFs) and biota-sediment bioaccumulation factors (BSAFs). The BCFs ranged between 28.57 - 280 L/Kg and the BSAFs ranged between 2.52- 30.66 at different sites. These results indicate that L.peploides can bioaccumulated glyphosate in its leaves and the major bioavailability is given mainly by the herbicide molecules present in surface water, rather than sediment. In this sense, L.peploides could be used as biomonitor organism to evaluate a glyphosate levels in the freshwater aquatic ecosystems

Uptake and disposition of select pharmaceuticals by bluegill exposed at constant concentrations in a flow-through aquatic exposure system

USGS Publications Warehouse

Zhao, Jian-Liang; Furlong, Edward T.; Schoenfuss, Heiko L.; Kolpin, Dana W.; Bird, Kyle L.; Feifarek, David J.; Schwab, Eric A.; Ying, Guang-Guo

2017-01-01

The increasing use of pharmaceuticals has led to their subsequent input into and release from wastewater treatment plants, with corresponding discharge into surface waters that may subsequently exert adverse effects upon aquatic organisms. Although the distribution of pharmaceuticals in surface water has been extensively studied, the details of uptake, internal distribution, and kinetic processing of pharmaceuticals in exposed fish have received less attention. For this research, we investigated the uptake, disposition, and toxicokinetics of five pharmaceuticals (diclofenac, methocarbamol, rosuvastatin, sulfamethoxazole, and temazepam) in bluegill sunfish (Lepomis macrochirus) exposed to environmentally relevant concentrations (1000–4000 ng L–1) in a flow-through exposure system. Temazepam and methocarbamol were consistently detected in bluegill biological samples with the highest concentrations in bile of 4, 940, and 180 ng g–1, respectively, while sulfamethoxazole, diclofenac, and rosuvastatin were only infrequently detected. Over 30-day exposures, the relative magnitude of mean concentrations of temazepam and methocarbamol in biological samples generally followed the order: bile ≫ gut > liver and brain > muscle, plasma, and gill. Ranges of bioconcentration factors (BCFs) in different biological samples were 0.71–3960 and 0.13–48.6 for temazepam and methocarbamol, respectively. Log BCFs were statistically positively correlated to pH adjusted log Kow (that is, log Dow), with the strongest relations for liver and brain (r2 = 0.92 and 0.99, respectively), implying that bioconcentration patterns of ionizable pharmaceuticals depend on molecular status, that is, whether a pharmaceutical is un-ionized or ionized at ambient tissue pH. Methocarbamol and temazepam underwent rapid uptake and elimination in bluegill biological compartments with uptake rate constants (Ku) and elimination rate constants (Ke) at 0.0066–0.0330 h–1 and 0.0075–0.0384 h–1, respectively, and half-lives at 18.1–92.4 h. Exposure to mixtures of diclofenac, methocarbamol, sulfamethoxazole, and temazepam had little or no influence on the uptake and elimination rates, suggesting independent multiple uptake and disposition behaviors of pharmaceuticals by fish would occur when exposed to effluent-influenced surface waters.

Linear and nonlinear models for predicting fish bioconcentration factors for pesticides.

PubMed

Yuan, Jintao; Xie, Chun; Zhang, Ting; Sun, Jinfang; Yuan, Xuejie; Yu, Shuling; Zhang, Yingbiao; Cao, Yunyuan; Yu, Xingchen; Yang, Xuan; Yao, Wu

2016-08-01

This work is devoted to the applications of the multiple linear regression (MLR), multilayer perceptron neural network (MLP NN) and projection pursuit regression (PPR) to quantitative structure-property relationship analysis of bioconcentration factors (BCFs) of pesticides tested on Bluegill (Lepomis macrochirus). Molecular descriptors of a total of 107 pesticides were calculated with the DRAGON Software and selected by inverse enhanced replacement method. Based on the selected DRAGON descriptors, a linear model was built by MLR, nonlinear models were developed using MLP NN and PPR. The robustness of the obtained models was assessed by cross-validation and external validation using test set. Outliers were also examined and deleted to improve predictive power. Comparative results revealed that PPR achieved the most accurate predictions. This study offers useful models and information for BCF prediction, risk assessment, and pesticide formulation. Copyright © 2016 Elsevier Ltd. All rights reserved.

The effects of dissolved organic matter and feeding on bioconcentration and oxidative stress of ethylhexyl dimethyl p-aminobenzoate (OD-PABA) to crucian carp (Carassius auratus).

PubMed

Ma, Binni; Lu, Guanghua; Yang, Haohan; Liu, Jianchao; Yan, Zhenhua; Nkoom, Matthew

2018-03-01

Bioconcentration of UV filters in organisms is an important indicator for the assessment of environmental hazards. However, bioconcentration testing rarely accounts for the influence of natural aquatic environmental factors. In order to better assess the ecological risk of organic UV filters (OUV-Fs) in an actual water environment, this study determined the influences of dissolved organic matter (DOM) (0, 1, 10, and 20 mg/L) and feeding (0, 0.5, 1, and 2% body weight/d) on bioconcentration of ethylhexyl dimethyl p-aminobenzoate (OD-PABA) in various tissues of crucian carp (Carassius auratus). Moreover, oxidative stress in the fish liver caused by the OD-PABA was also investigated by measuring activities of superoxide dismutase (SOD), catalase (CAT) and glutathione S-transferase (GST), and levels of glutathione (GSH) and malondialdehyde (MDA). The bioconcentration of OD-PABA in the fish tissues was significantly decreased with the presence of DOM indicating a reduction of OD-PABA bioavailability caused by DOM. The bioconcentration factors (BCFs) decreased by 28.00~50.93% in the muscle, 72.67~96.74% in the gill, 37.84~87.72% in the liver, and 10.32~79.38% in the kidney at different DOM concentrations compared to those of the non-DOM treatments. Significant changes in SOD, CAT, GST, GSH, and MDA levels were found in the DOM- and OD-PABA-alone treatments. However, there were no significant differences in the SOD, CAT, GST, and MDA levels found when co-exposure to OD-PABA and DOM. Feeding led to lower OD-PABA concentrations in the fish tissues, and the concentrations were decreased with increasing feeding ratios. BCFs in various tissues reduced by 39.75~72.52% in the muscle, 56.86~79.73% in the gill, 66.41~87.50% in the liver, and 75.88~89.10% in the kidney, respectively. In the unfed treatments, the levels of SOD and MDA were significantly higher than those of the fed ones while GST and GSH levels were remarkably inhibited indicating the enhanced effect of starvation to oxidative stress. There was no markedly alternation of the biomarker levels observed between different fed treatments. In conclusion, our study indicated that both DOM and feeding reduced bioconcentration of OD-PABA and alleviated oxidative stress to some extent in the crucian carp.

Effect of Transpiration on Plant Accumulation and Translocation of PPCP/EDCs

PubMed Central

Dodgen, Laurel K; Ueda, Aiko; Wu, Xiaoqin; Parker, David R; Gan, Jay

2015-01-01

The reuse of treated wastewater for agricultural irrigation in arid and hot climates where plant transpiration is high may affect plant accumulation of pharmaceutical and personal care products (PPCPs) and endocrine disrupting chemicals (EDCs). In this study, carrot, lettuce, and tomato plants were grown in solution containing 16 PPCP/EDCs in either a cool-humid or a warm-dry environment. Leaf bioconcentration factors (BCF) were positively correlated with transpiration for chemical groups of different ionized states (p < 0.05). However, root BCFs were correlated with transpiration only for neutral PPCP/EDCs (p < 0.05). Neutral and cationic PPCP/EDCs showed similar accumulation, while anionic PPCP/EDCs had significantly higher accumulation in roots and significantly lower accumulation in leaves (p < 0.05). Results show that plant transpiration may play a significant role in the uptake and translocation of PPCP/EDCs, which may have a pronounced effect in arid and hot climates where irrigation with treated wastewater is common. PMID:25594843

Environmental risk assessment of selected pharmaceuticals in Turkey.

PubMed

Oğuz, Merve; Mihçiokur, Hamdi

2014-07-01

In this study, environmental risks of selected pharmaceuticals were investigated to assess potential hazards. Ciprofloxacin, Clarithromycin, Cefuroxime axetil, antibiotics, Benzalkoniuman antiseptic, Paracetamol, an analgesic, and Naproxen, an anti-inflammatory, were selected due to their high rate of usage in Turkey. Ciprofloxacin was found to have the highest risk due to its high PEC/PNEC ratio (28.636). Benzalkonium, Paracetamol and Clarithromycin have a potential to cause environmental hazards. The biodegradation and biological concentration factors (BCF) of the drugs were also determined using EPA/STWIN and EPA/BCFWIN programs. The results illustrated that these pharmaceuticals are nonbiodegradable in wastewater treatment plants. The BCFs of Benzalkonium and Clarithromycin were found to be very high, 70.790 L/kg and 56.490 L/kg, respectively. It was suggested that alternative treatment methods other than biological ones should be investigated for these pharmaceuticals because of their low biodegradability. Also, unnecessary use of antibiotics is supposed to be discouraged to reduce environmental hazards. Copyright © 2014 Elsevier B.V. All rights reserved.

Distribution, Fraction, and Ecological Assessment of Heavy Metals in Sediment-Plant System in Mangrove Forest, South China Sea.

PubMed

Li, Ruili; Chai, Minwei; Qiu, Guo Yu

2016-01-01

Overlying water, sediment, rhizosphere sediment and mangrove seedlings in the Futian mangrove forest were analyzed for heavy metals. The results showed that mangrove plant acidified sediment and increased organic matter contents. Except for chromium (Cr), nickel (Ni) and copper (Cu) in Aegiceras corniculatum sediment, heavy metals in all sediments were higher than in overlying water, rhizosphere sediment and mangrove root. Heavy metals in Avicennia marina sediments were higher than other sediments. The lower heavy metal biological concentration factors (BCFs) and translocation factors (TFs) indicated that mangrove plant adopted exclusion strategy. The geo-accumulation index, potential ecological risk index and risk assessment code (RAC) demonstrated that heavy metals have posed a considerable ecological risk, especially for cadmium (Cd). Heavy metals (Cr, Ni, Cu and Cd) mainly existed in the reducible fractions. These findings provide actual heavy metal accumulations in sediment-plant ecosystems in mangrove forest, being important in designing the long-term management and conservation policies for managers of mangrove forest.

Distribution, Fraction, and Ecological Assessment of Heavy Metals in Sediment-Plant System in Mangrove Forest, South China Sea

PubMed Central

Li, Ruili; Chai, Minwei; Qiu, Guo Yu

2016-01-01

Overlying water, sediment, rhizosphere sediment and mangrove seedlings in the Futian mangrove forest were analyzed for heavy metals. The results showed that mangrove plant acidified sediment and increased organic matter contents. Except for chromium (Cr), nickel (Ni) and copper (Cu) in Aegiceras corniculatum sediment, heavy metals in all sediments were higher than in overlying water, rhizosphere sediment and mangrove root. Heavy metals in Avicennia marina sediments were higher than other sediments. The lower heavy metal biological concentration factors (BCFs) and translocation factors (TFs) indicated that mangrove plant adopted exclusion strategy. The geo-accumulation index, potential ecological risk index and risk assessment code (RAC) demonstrated that heavy metals have posed a considerable ecological risk, especially for cadmium (Cd). Heavy metals (Cr, Ni, Cu and Cd) mainly existed in the reducible fractions. These findings provide actual heavy metal accumulations in sediment-plant ecosystems in mangrove forest, being important in designing the long-term management and conservation policies for managers of mangrove forest. PMID:26800267

Chelant-assisted phytoextraction and accumulation of Zn by Zea mays.

PubMed

Gheju, M; Stelescu, I

2013-10-15

Zea mays plants were exposed to soils with concentrations of Zn ranging from 64 to 1800 mg kg(-1) dw, and the efficiency of three selected chelating agents (trisodium citrate (CI), disodium oxalate (OX) and disodium dihydrogen ethylene-diamine-tetraacetate (EDTA)) in enhancing metal phytoextraction was compared. Zn concentration in plant tissues increased in conjunction with the metal concentration of the soil. EDTA was found to be the most efficient chelating amendment, increasing concentrations of Zn in shoots from 88 mg kg(-1) dw, at 64 mg kg(-1) dw soil, to 8026 mg kg(-1) dw at 1800 mg kg(-1) dw soil. The overall orders of BCFs and TFs which resulted from this study are: EDTA > H2O > OX > CI, and EDTANa2 > OX > CI > H2O, respectively. The more effective uptake of Zn by plants for the control treatment (distilled water only) than for CI and OX was attributed to the neutral or slightly alkaline pH of the two chelant irrigation solutions. Instead, EDTA had a favorable effect on Zn uptake from soil due to its additive chelating and acidifying properties. Among the three chelants, only EDTA significantly increased the Zn phytoextraction potential of Z. mays, while CI and OX induced a low metal uptake from soil by plants. Although Z. mays has a lower Zn accumulation capacity than the hyperaccumulator Thlaspi caerulescens, it could be considered as a potential phytoremediator of soils with elevated Zn concentrations, especially when metal pollution extends to depths greater than 20 cm. Copyright © 2013 Elsevier Ltd. All rights reserved.

Total mercury and methylmercury accumulation in wild plants grown at wastelands composed of mine tailings: Insights into potential candidates for phytoremediation.

PubMed

Qian, Xiaoli; Wu, Yonggui; Zhou, Hongyun; Xu, Xiaohang; Xu, Zhidong; Shang, Lihai; Qiu, Guangle

2018-08-01

Total mercury (THg) and methylmercury (MMHg) were investigated in 259 wild plants belonging to 49 species in 29 families that grew in heavily Hg-contaminated wastelands composed of cinnabar ore mine tailings (calcines) in the Wanshan region, southwestern China, the world's third largest Hg mining district. The bioconcentration factors (BCFs) of THg and MMHg from soil to roots ([THg] root /[THg] soil , [MMHg] root /[MMHg] soil ) were evaluated. The results showed that THg and MMHg in both plants and soils varied widely, with ranges of 0.076-140 μg/g THg and 0.19-87 ng/g MMHg in roots, 0.19-106 μg/g THg and 0.06-31 ng/g MMHg in shoots, and 0.74-1440 μg/g THg and 0.41-820 ng/g MMHg in soil. Among all investigated species, Arthraxon hispidus, Eremochloa ciliaris, Clerodendrum bunge, and Ixeris sonchifolia had significantly elevated concentrations of THg in shoots and/or roots that reached 100 μg/g, whereas Chenopodium glaucum, Corydalisedulis maxim, and Rumex acetosa contained low values below 0.5 μg/g. In addition to the high THg concentrations, the fern E. ciliaris also showed high BCF values for both THg and MMHg exceeding 1.0, suggesting its capability to extract Hg from soils. Considering its dominance and the tolerance identified in the present study, E. ciliaris is suggested to be a practical candidate for phytoextraction, whereas A. hispidus is identified as a potential candidate for phytostabilization of Hg mining-contaminated soils. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluation of different methods for assessing bioavailability of DDT residues during soil remediation.

PubMed

Wang, Jie; Taylor, Allison; Xu, Chenye; Schlenk, Daniel; Gan, Jay

2018-07-01

Compared to the total chemical concentration, bioavailability is a better measurement of risks of hydrophobic organic contaminants (HOCs) to biota in contaminated soil or sediment. Many different bioavailability estimation methods have been introduced to assess the effectiveness of remediation treatments. However, to date the different methods have rarely been evaluated against each other, leading to confusions in method selection. In this study, four different bioavailability estimation methods, including solid phase microextraction (SPME) and polyethylene passive sampling (PE) aiming to detect free chemical concentration (C free ), and Tenax desorption and isotope dilution method (IDM) aiming to measure chemical accessibility, were used in parallel to estimate in bioavailability of DDT residues (DDXs) in a historically contaminated soil after addition of different black carbon sorbents. Bioaccumulation into earthworm (Eisenia fetida) was measured concurrently for verification. Activated carbon or biochar amendment at 0.2-2% decreased earthworm bioaccumulation of DDXs by 83.9-99.4%, while multi-walled carbon nanotubes had a limited effect (4.3-20.7%). While all methods correctly predicted changes in DDX bioavailability after black carbon amendment, passive samplers offered more accurate predictions. Predicted levels of DDXs in earthworm lipid using the estimated bioavailability and empirical BCFs matched closely with the experimentally derived tissue concentrations. However, Tenax and IDM overestimated bioavailability when the available DDX levels were low. Our findings suggested that both passive samplers and bioaccessibility methods can be used in assessing remediation efficiency, presenting flexibility in method selection. While accessibility-oriented methods offer better sensitivity and shorter sampling time, passive samplers may be more advantageous because of their better performance and computability for in situ deployment. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluation of the cadmium and lead phytoextraction by castor bean (Ricinus communis L.) in hydroponics

NASA Astrophysics Data System (ADS)

Niu, Z. X.; Sun, L. N.

2017-06-01

Phytoextraction has been considered as an innovative method to remove toxic metals from soil; higher biomass plants such as castor bean (Ricinus communis L.) have already been considered as a hyperaccumulating candidate. In the present study, castor bean was used to accumulate the cadmium and lead in hydroponic culture, and the root exudates and biomass changes were analyzed. Results demonstrated that ratios of aerial biomass/ root biomass (AW/RW) in treatments declined with concentrations of Cd or Pb. Optical density (OD) at 190 nm and 280 nm of root exudates observed in Cd and Pb treatments were lower than the control. In single Cd or Pb treatments, bioconcentration factors (BCF) of Cd or Pb increased with time and decreased with concentrations, the highest BCFs appeared in Cd5 (14.36) and Pb50 (6.48), respectively. Cd-BCF or Pb-BCF showed positive correlations with AW/RW ratios and OD values, and they were negative correlated with Cd and Pb concentration. Results in this study may supply useful information for phytoremediation of soil contaminated with cadmium and lead in situ.

Profile and bioconcentration of minerals by King Bolete (Boletus edulis) from the Płocka Dale in Poland.

PubMed

Frankowska, Aneta; Ziółkowska, Joanna; Bielawski, Leszek; Falandysz, Jerzy

2010-01-01

This study aimed to provide basic data on the composition of metallic elements, including toxicologically important Cd and Hg, in popular and prized wild King Bolete mushrooms. We investigated the importance of soil substratum as a source of these metals. ICP-OES and CV-AAS were applied to determine the profile of Al, Ba, Ca, Cd, Cu, Fe, Hg, K, Mg, Mn, Na, Sr and Zn in caps and stipes of King Bolete mushroom and in the surface layer of soil (0-10 cm) from the Płocka Dale area of Poland. Hg, Cu, Cd, Zn, Mg and K exhibited bioconcentration factors (BCF) > 1. Specifically, Hg, Cu and Cd (mean BCFs for caps were 110, 19 and 16, respectively) were efficiently bioconcentrated by King Bolete, while other elements were bioexcluded (BCF < 1). Cadmium was present in the caps at mean levels of 5.5 ± 2.4 mg kg(-1) dry weight (dw) and mercury at levels of 4.9 ± 1.4 mg kg(-1) dw, both occurring at elevated concentrations in those King Bolete mushrooms surveyed.

Changes in bioaccumulation and translocation patterns between root and leafs of Avicennia schaueriana as adaptive response to different levels of metals in mangrove system.

PubMed

Souza, Iara da C; Rocha, Lívia D; Morozesk, Mariana; Bonomo, Marina M; Arrivabene, Hiulana P; Duarte, Ian D; Furlan, Larissa M; Monferrán, Magdalena V; Mazik, Krysia; Elliott, Michael; Matsumoto, Silvia T; Milanez, Camilla R D; Wunderlin, Daniel A; Fernandes, Marisa N

2015-05-15

Espírito Santo estuaries (Brazil) are impacted by industrial activities, resulting in contamination of water and sediments. This raise questions on biological uptake, storage and consequences of metal contamination to mangrove plants. The goal of this work was evaluating accumulation and translocation of metals from sediment to roots and leaves of Avicennia schaueriana, growing in areas with different degrees of contamination, correlating bioaccumulation with changes in its root anatomy. Highest bioconcentration factors (BCFs) were observed in plants growing in less polluted areas. Conversely, highest translocation factors were found in plants from highest polluted area, evidencing an adaptive response of A. schaueriana to less favourable conditions. Namely, the absorption of metals by roots is diminished when facing highest levels of metals in the environment; alternatively, plants seem to enhance the translocation to diminish the concentration of toxic metals in roots. Root also responded to highly polluted scenarios with modifications of its anatomy. Copyright © 2015 Elsevier Ltd. All rights reserved.

A study of parabens and bisphenol A in surface water and fish brain tissue from the Greater Pittsburgh Area.

PubMed

Renz, Lara; Volz, Conrad; Michanowicz, Drew; Ferrar, Kyle; Christian, Charles; Lenzner, Diana; El-Hefnawy, Talal

2013-05-01

Pollution from xenoestrogens has been discovered in the aquatic environment of the Greater Pittsburgh Area and is suspected to be caused by the failing sewer system. Personal care products and plasticizers have the potential to enter the water supply though treated and untreated sewage. Many of these compounds are suspected xenoestrogens. Paraben detection in surface waters was as follows: methyl paraben ranged between 2.2 to 17.3 ppt; ethyl paraben was not detectable; propyl paraben was detected at 9.2 and 12.0 ppt; butyl paraben was detected at 0.2 ppt. BPA was detected between 0.6 and 15.4 ppt. Estrogenic potential of extracts from fish brain tissue was tested via Bromodeoxyuridine MCF-7 analysis and paired with HPLC-MS to investigate the presence of xenoestrogens. All samples were non-detectable for parabens. BPA was detected in 44 of the 58 samples, with a range from non-detectable to 120 pg/g. BCFs were calculated. Results were statistically significant for location of capture (p < 0.05) and correlation existed between estrogenicity and BPA.

Natural revegetation of alkaline tailing heaps at Taxco, Guerrero, Mexico.

PubMed

Cortés-Jiménez, E V; Mugica-Alvarez, V; González-Chávez, M C A; Carrillo-González, R; Martínez Gordillo, M; Vaca Mier, M

2013-01-01

The aim of this research was to identify adapted native plant species with potential for use in phytoremediation of a metalliferous mine tailings heap in Guerrero, Mexico. Physicochemical characterization, total, DTPA-extractable and fractionation of metals in rhizospheric and non-rhizopheric samples were carried out to gain information about their potential risks. Metal concentrations in plant and bioconcentration factors (BCF) were also determined. Organic matter (OM) and total N contents were higher in the rhizospheric samples, which could improve the conditions for plant establishment. Total Cu, Zn, and Pb concentration were above those for normal soils. The highest metals concentration was found in the residual and organic fractions. Eleven plant species were recorded at the site; three behaved as metal accumulator plants: Gnaphalium chartaceum (accumulator of Cu, Mn, Zn, and Ph), Wigandia urens and Senecio salignus (1027 and 2477 mg kg(-1) of Zn). These species and Brickellia sp. presented high Pb-BCF; they may be suitable for metals phytoextraction. Seven species behaved as excluder plants; Guardiola tulocarpus, Juniperus flaccida, and Ficus goldmanii, presented low BCFs. These species are well suited to cope with the toxic conditions, and they could be propagated for revegetation and stabilization of these residues and to decrease metal bioavailability.

A Hierarchical Biology Concept Framework: A Tool for Course Design

PubMed Central

Khodor, Julia; Halme, Dina Gould; Walker, Graham C.

2004-01-01

A typical undergraduate biology curriculum covers a very large number of concepts and details. We describe the development of a Biology Concept Framework (BCF) as a possible way to organize this material to enhance teaching and learning. Our BCF is hierarchical, places details in context, nests related concepts, and articulates concepts that are inherently obvious to experts but often difficult for novices to grasp. Our BCF is also cross-referenced, highlighting interconnections between concepts. We have found our BCF to be a versatile tool for design, evaluation, and revision of course goals and materials. There has been a call for creating Biology Concept Inventories, multiple-choice exams that test important biology concepts, analogous to those in physics, astronomy, and chemistry. We argue that the community of researchers and educators must first reach consensus about not only what concepts are important to test, but also how the concepts should be organized and how that organization might influence teaching and learning. We think that our BCF can serve as a catalyst for community-wide discussion on organizing the vast number of concepts in biology, as a model for others to formulate their own BCFs and as a contribution toward the creation of a comprehensive BCF. PMID:15257339

Tissue-specific uptake and bioconcentration of the oral contraceptive norethindrone in two freshwater fishes.

PubMed

Nallani, Gopinath C; Paulos, Peter M; Venables, Barney J; Edziyie, Regina E; Constantine, Lisa A; Huggett, Duane B

2012-02-01

The environmental presence of the oral contraceptive norethindrone (NET) has been reported and shown to have reproductive effects in fish at environmentally realistic exposure levels. The current study examined bioconcentration potential of NET in fathead minnow (Pimephales promelas) and channel catfish (Ictalurus punctatus). Fathead minnows were exposed to 50 μg/l NET for 28 days and allowed to depurate in clean water for 14 days. In a minimized 14-day test design, catfish were exposed to 100 μg/l NET for 7 days followed by 7-day depuration. In the fathead test, tissues (muscle, liver, and kidneys) were sampled during the uptake (days 1, 3, 7, 14, and 28) and depuration (days 35 and 42) phases. In the catfish test, muscle, liver, gill, brain, and plasma were collected during the uptake (days 1, 3, and 7) and depuration (day 14) stages. NET tissue levels were determined by gas chromatography-mass spectrometry (GC-MS). Accumulation of NET in tissues was greatest in liver followed by plasma, gill, brain, and muscle. Tissue-specific bioconcentration factors (BCFs) ranged from 2.6 to 40.8. Although NET has been reported to elicit reproductive effects in fish, the present study indicated a low potential to bioconcentrate in aquatic biota.

Bioconcentration of ibuprofen in fathead minnow (Pimephales promelas) and channel catfish (Ictalurus punctatus).

PubMed

Nallani, Gopinath C; Paulos, Peter M; Constantine, Lisa A; Venables, Barney J; Huggett, Duane B

2011-09-01

Pharmaceutical products and their metabolites are being widely detected in aquatic environments and there is a growing interest in assessing potential risks of these substances to fish and other non-target species. Ibuprofen is one of the most commonly used analgesic drugs and no peer-reviewed laboratory studies have evaluated the tissue specific bioconcentration of ibuprofen in fish. In the current study, fathead minnow (Pimephales promelas) were exposed to 250 μg L(-1) ibuprofen for 28 d followed by a 14 d depuration phase. In a minimized bioconcentration test design, channel catfish (Ictalurus punctatus) were exposed to 250 μg L(-1) for a week and allowed to depurate for 7 d. Tissues were collected during uptake and depuration phases of each test and the corresponding proportional and kinetic bioconcentration factors (BCFs) were estimated. The results indicated that the BCF levels were very low (0.08-1.4) implying the lack of bioconcentration potential for ibuprofen in the two species. The highest accumulation of ibuprofen was observed in the catfish plasma as opposed to individual tissues. The minimized test design yielded similar bioconcentration results as those of the standard test and has potential for its use in screening approaches for pharmaceuticals and other classes of chemicals. Copyright © 2011 Elsevier Ltd. All rights reserved.

Constituent bioconcentration in rainbow trout exposed to a complex chemical mixture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linder, G.; Bergman, H.L.; Meyer, J.S.

1984-09-01

Classically, aquatic contaminant fate models predicting a chemical's bioconcentration factor (BCF) are based upon single-compound derived models, yet such BCF predictions may deviate from observed BCFs when physicochemical interactions or biological responses to complex chemical mixture exposures are not adequately considered in the predictive model. Rainbow trout were exposed to oil-shale retort waters. Such a study was designed to model the potential biological effects precluded by exposure to complex chemical mixtures such as solid waste leachates, agricultural runoff, and industrial process waste waters. Chromatographic analysis of aqueous and nonaqueous liquid-liquid reservoir components yielded differences in mixed extraction solvent HPLC profilesmore » of whole fish exposed for 1 and 3 weeks to the highest dilution of the complex chemical mixture when compared to their corresponding control, yet subsequent whole fish extractions at 6, 9, 12, and 15 weeks into exposure demonstrated no qualitative differences between control and exposed fish. Liver extractions and deproteinized bile samples from exposed fish were qualitatively different than their corresponding controls. These findings support the projected NOEC of 0.0045% dilution, even though the differences in bioconcentration profiles suggest hazard assessment strategies may be useful in evaluating environmental fate processes associated with complex chemical mixtures. 12 references, 4 figures, 2 tables.« less

Uptake and Metabolism of Phthalate Esters by Edible Plants.

PubMed

Sun, Jianqiang; Wu, Xiaoqin; Gan, Jay

2015-07-21

Phthalate esters (PAEs) are large-volume chemicals and are found ubiquitously in soil as a result of widespread plasticulture and waste disposal. Food plants such as vegetables may take up and accumulate PAEs from soil, potentially imposing human health risks through dietary intake. In this study, we carried out a cultivation study using lettuce, strawberry, and carrot plants to determine the potential of plant uptake, translocation, and metabolism of di-n-butyl phthalate (DnBP) and di(2-ethylhexyl) phthalate (DEHP) and their primary metabolites mono-n-butyl phthalate (MnBP) and mono(2-ethylhexyl) phthalate (MEHP). All four compounds were detected in the plant tissues, with the bioconcentration factors (BCFs) ranging from 0.16 ± 0.01 to 4.78 ± 0.59. However, the test compounds were poorly translocated from roots to leaves, with a translocation factor below 1. Further, PAEs were readily transformed to their monoesters following uptake. Incubation of PAEs and monoalkyl phthalate esters (MPEs) in carrot cell culture showed that DnBP was hydrolyzed more rapidly than DEHP, while the monoesters were transformed more quickly than their parent precursors. Given the extensive metabolism of PAEs to monoesters in both whole plants and plant cells, metabolism intermediates such as MPEs should be considered when assessing human exposure via dietary intake of food produced from PAE-contaminated soils.

Heavy metal tolerance and accumulation of Triarrhena sacchariflora, a large amphibious ornamental grass.

PubMed

Tian, R N; Yu, S; Wang, S G; Zhang, Y; Tang, J Y; Liu, Y L; Nie, Y H

2013-01-01

In this study, we report the tolerance and accumulation of Triarrhena sacchariflora to copper (Cu) and cadmium (Cd). The results show that T. sacchariflora had strong tolerance to Cu and Cd stress. The tolerance indexes (TI) were greater than 0.5 for all treatments. The bioconcentration factors (BCFs) to Cu and Cd were both above 1.0. The accumulation ability of roots was stronger than that of shoots, and ranges of BCF to Cu and Cd in roots were 37.89-79.08 and 83.96-300.57, respectively. However, the translocation ability to Cu and Cd was weak, with more than 86% of Cu or Cd accumulated in roots, suggesting an exclusion strategy for heavy metal tolerance. The uptake efficiency (UE) and translocation efficiency (TE) to Cu and Cd increased linearly as the Cu and Cd concentration in the substrate increased. UE was higher than TE, with a maximum of 2,118.90 μg g(-1) root dry weight (DW) (50 mg L(-1) Cu) and 1,847.51 μg g(-1) root DW (20 mg L(-1)Cd), respectively. The results indicate that T. sacchariflora is a Cu- and Cd-tolerant non-hyperaccumulator plant, suggesting that T. sacchariflora could play an important role in phytoremediation in areas contaminated with Cu and Cd.

Molecular electronegativity distance vector model for the prediction of bioconcentration factors in fish.

PubMed

Liu, Shu-Shen; Qin, Li-Tang; Liu, Hai-Ling; Yin, Da-Qiang

2008-02-01

Molecular electronegativity distance vector (MEDV) derived directly from the molecular topological structures was used to describe the structures of 122 nonionic organic compounds (NOCs) and a quantitative relationship between the MEDV descriptors and the bioconcentration factors (BCF) of NOCs in fish was developed using the variable selection and modeling based on prediction (VSMP). It was found that some main structural factors influencing the BCFs of NOCs are the substructures expressed by four atomic types of nos. 2, 3, 5, and 13, i.e., atom groups -CH(2)- or =CH-, -CH< or =C<, -NH(2), and -Cl or -Br where the former two groups exist in the molecular skeleton of NOC and the latter three groups are related closely to the substituting groups on a benzene ring. The best 5-variable model, with the correlation coefficient (r(2)) of 0.9500 and the leave-one-out cross-validation correlation coefficient (q(2)) of 0.9428, was built by multiple linear regressions, which shows a good estimation ability and stability. A predictive power for the external samples was tested by the model from the training set of 80 NOCs and the predictive correlation coefficient (u(2)) for the 42 external samples in the test set was 0.9028.

Uptake of polybrominated diphenyl ethers by carrot and lettuce crops grown in compost-amended soils.

PubMed

Bizkarguenaga, E; Iparraguirre, A; Oliva, E; Quintana, J B; Rodil, R; Fernández, L A; Zuloaga, O; Prieto, A

2016-02-01

The uptake of polybrominated diphenyl ethers (PBDEs) by carrot and lettuce was investigated. Degradation of PBDEs in soil in the absence of the plants was discarded. Different carrot (Nantesa and Chantenay) and lettuce (Batavia Golden Spring and Summer Queen) varieties were grown in fortified or contaminated compost-amended soil mixtures under greenhouse conditions. After plant harvesting, roots (core and peel) and leaves were analyzed separately for carrot, while for lettuce, leaves and hearts were analyzed together. The corresponding bioconcentration factors (BCFs) were calculated. In carrots, a concentration gradient of 2,2',3,4,4',5'-hexabromodiphenyl ether (BDE-138) became evident that decreased from the root peel via root core to the leaves. For decabromodiphenyl ether (BDE-209) at the low concentration level (7 and 20 ng g(-1)), the leaves incorporated the highest concentration of the target substance. For lettuce, a decrease in the BCF value (from 0.24 to 0.02) was observed the higher the octanol-water partition coefficient, except in the case of BDE-183 (BCF = 0.51) and BDE-209 (BCF values from 0.41 to 0.74). Significant influence of the soils and crop varieties on the uptake could not be supported. Metabolic debromination, hydroxylation or methylation of the target PBDEs in the soil-plant system was not observed.

Bioavailability of atrazine, pyrene and benzo[a]pyrene in European river waters

USGS Publications Warehouse

Akkanen, J.; Penttinen, S.; Haitzer, M.; Kukkonen, J.V.K.

2001-01-01

Thirteen river waters and one humic lake water were characterized. The effects of dissolved organic matter (DOM) on the bioavailability of atrazine, pyrene and benzo[a]pyrene (B[a]P) was evaluated. Binding of the chemicals by DOM was analyzed with the equilibrium dialysis technique. For each of the water samples, 24 h bioconcentration factors (BCFs) of the chemicals were measured in Daphnia magna. The relationship between DOM and other water characteristics (including conductivity, water hardness and pH), and bioavailability of the chemicals was studied by performing several statistical analyses, including multiple regression analyses, to determine how much of the variation of BCF values could be explained by the quantity and quality of DOM. The bioavailability of atrazine was not affected by DOM or any other water characteristics. Although equilibrium dialysis showed binding of pyrene to DOM, the bioavailability of pyrene was not significantly affected by DOM. The bioavailability of B[a]P was significantly affected by both the quality and quantity of DOM. Multiple regression analyses, using the quality (ABS270 and HbA%) and quantity of DOM as variables, explainedup to 70% of the variation in BCF of B[a]P in the waters studied. ?? 2001 Elsevier Science Ltd. All rights reserved.

In Vivo Biotransformation Rates of Organic Chemicals in Fish: Relationship with Bioconcentration and Biomagnification Factors.

PubMed

Lo, Justin C; Letinski, Daniel J; Parkerton, Thomas F; Campbell, Dave A; Gobas, Frank A P C

2016-12-20

In vivo dietary bioaccumulation experiments for 85 hydrophobic organic substances were conducted to derive the in vivo gastrointestinal biotransformation rates, somatic biotransformation rates, bioconcentration factors (BCF), and biomagnification factors (BMF) for improving methods for bioaccumulation assessment and to develop an in vivo biotransformation rate database for QSAR development and in vitro to in vivo biotransformation rate extrapolation. The capacity of chemicals to be biotransformed in fish was found to be highly dependent on the route of exposure. Somatic biotransformation was the dominant pathway for most chemicals absorbed via the respiratory route. Intestinal biotransformation was the dominant metabolic pathway for most chemicals absorbed via the diet. For substances not biotransformed or transformed exclusively in the body of the fish, the BCF and BMF appeared to be closely correlated. For substances subject to intestinal biotransformation, the same correlation did not apply. We conclude that intestinal biotransformation and bioavailability in water can modulate the relationship between the BCF and BMF. This study also supports a fairly simple rule of thumb that may be useful in the interpretation of dietary bioaccumulation tests; i.e., chemicals with a BMF L of <1 tend to exhibit BCFs based on either the freely dissolved (BCF WW,fd ) or the total concentration (BCF WW,t ) of the chemical in the water that is less than 5000.

Assessment of potential indigenous plant species for the phytoremediation of arsenic-contaminated areas of Bangladesh.

PubMed

Mahmud, Rezwanul; Inoue, Naoto; Kasajima, Shin-Ya; Shaheen, Riffat

2008-01-01

Soil and water contaminated with arsenic (As) pose a major environmental and human health problem in Bangladesh. Phytoremediation, a plant-based technology, may provide an economically viable solution for remediating the As-polluted sites. The use of indigenous plants with a high tolerance and accumulation capacity for As may be a very convenient approach for phytoremediation. To assess the potential of native plant species for phytoremediation, plant and soil samples were collected from four As-contaminated (groundwater) districts in Bangladesh. The main criteria used for selecting plants for phytoremediation were high bioconcentration factors (BCFs) and translocation factors (TFs) of As. From the results of a screening of 49 plant species belonging to 29 families, only one species of fern (Dryopteris filix-mas), three herbs (Blumea lacera, Mikania cordata, and Ageratum conyzoides), and two shrubs (Clerodendrum trichotomum and Ricinus communis) were found to be suitable for phytoremediation. Arsenic bioconcentration and translocation factors > 1 suggest that these plants are As-tolerant accumulators with potential use in phytoextraction. Three floating plants (Eichhornia crassipes, Spirodela polyrhiza, and Azolla pinnata) and a common wetland weed (Monochoria vaginalis) also showed high BCF and TF values; therefore, these plants may be promising candidates for cleaningup As-contaminated surface water and wetland areas. The BCF of Oryza sativa, obtained from As-contaminated districts was > 1, which highlights possible food-chain transfer issues for As-contaminated areas in Bangladesh.

[Metal accumulation and MTLP induction in the digestive glands of Perna viridis exposed to Cu].

PubMed

Li, Chun-Di; Yan, Wen; Long, Ai-Min; Ma, Fu-Jun; Chen, Shao-Yong

2007-08-01

Mussels have been proposed as appropriate biomonitors of marine pollution, especially for monitoring metallic pollution based on variations of metallothionein as biomarkers. Under 2 exposure levels (12.7 microg/L, 63.5 microg/L), Cu accumulation and metallothionein-like protein (MTLP) induction by mussel (Perna viridis) digestive glands were investigated and simulated into dynamic models in the present work, and the soluble and total Cu burden of digestive glands were also determined. Calculated mean Cu uptake rates by mussel target organ were 2.045 and 7.028 microg x (g x d)(-1) respectively, and the theoretical equilibrium kinetic BCFs of Cu were 2074 and 1619 correspondingly. And within the exposure duration, different changing trends of ratio of soluble Cu to total Cu in digestive glands were observed in the two groups. The MTLP level of control samples was (0.551 +/- 0.037) mg/g, and the counterparts are 0.407 - 0.699 mg/g, 0.826 - 0.942 mg/g respectively when mussels were exposed to 12.7 microg/L and 63.5 microg/L Cu solutions. Statistically significant MTLP induction (p < 0.001) was observed under higher exposure level. MTLP contents in digestive glands increased with the exposure Cu concentration and body accumulation of metal. There is a significantly negative exponential rise relationship (p < 0.000 1) between MTLP and Cu concentrations accumulated in the digestive glands of mussels.

Improved method estimating bioconcentration/bioaccumulation factor from octanol/water partition coefficient

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meylan, W.M.; Howard, P.H.; Aronson, D.

1999-04-01

A compound`s bioconcentration factor (BDF) is the most commonly used indicator of its tendency to accumulate in aquatic organisms from the surrounding medium. Because it is expensive to measure, the BCF is generally estimated from the octanol/water partition coefficient (K{sub ow}), but currently used regression equations were developed from small data sets that do not adequately represent the wide range of chemical substances now subject to review. To develop and improved method, the authors collected BCF data in a file that contained information on measured BCFs and other key experimental details for 694 chemicals. Log BCF was then regressed againstmore » log K{sub ow} and chemicals with significant deviations from the line of best fit were analyzed by chemical structure. The resulting algorithm classifies a substance as either nonionic or ionic, the latter group including carboxylic acids, sulfonic acids and their salts, and quaternary N compounds. Log BCF for nonionics is estimated from log K{sub ow} and a series of correction factors if applicable; different equations apply for log K{sub ow} 1.0 to 7.0 and >7.0. For ionics, chemicals are categorized by log K{sub ow} and a log BCF in the range 0.5 to 1.75 is assigned. Organometallics, nonionics with long alkyl chains, and aromatic azo compounds receive special treatment. The correlation coefficient and mean error for log BCF indicate that the new method is a significantly better fit to existing data than other methods.« less

Field and laboratory fish tissue accumulation of the anti-convulsant drug carbamazepine.

PubMed

Garcia, Santos N; Foster, Michael; Constantine, Lisa A; Huggett, Duane B

2012-10-01

Understanding the potential for human and veterinary pharmaceuticals to accumulate in the tissues of biota is a topic of increasing importance in the pharmaceutical risk assessment process. However, few data are available in the literature that compare the ability of laboratory bioconcentration studies to predict field tissue concentrations. To begin to address this data gap, bioconcentration factors (BCF) for carbamazepine (CBZ), a human anticonvulsant that modulates Na+ channels, were determined using laboratory experiments with Pimephales notatus and Ictalurus punctatus. These data were compared to field derived bioaccumulation factors (BAFs) for Oreochromis niloticus from the Denton, Texas Wastewater Treatment Plant. The 42 d kinetic BCFs (BCFk) for white muscle and liver of P. notatus were 1.9 and 4.6, respectively, while the white muscle, liver, brain, and plasma BCFk's of I. punctatus were 1.8, 1.5, 1.6, and 7.1, respectively. Field derived BAF values (2.5-3.8) for O. niloticus were similar to those derived in laboratory studies. Partitioning values between blood plasma and individual tissues were calculated for I. punctatus and O. niloticus, with the values indicating that tissue levels of carbamazepine are similar or slightly higher than plasma concentrations. Collectively these data suggest that the fish laboratory BCF and field derived BCF/BAF values for carbamazepine are similar and much lower than the European Union regulatory threshold of 2000 for designation of a "B" substance. Copyright © 2012 Elsevier Inc. All rights reserved.

The accumulation and health risk of heavy metals in vegetables around a zinc smelter in northeastern China.

PubMed

Li, Bo; Wang, Yanhong; Jiang, Yong; Li, Guochen; Cui, Jiehua; Wang, Ying; Zhang, Hong; Wang, Shicheng; Xu, Sheng; Wang, Ruzhen

2016-12-01

Mining and smelting activities engender soil contamination by metals severely. A field survey was conducted to investigate the present situation and health risk of heavy metals (Cd, Pb, Zn, Cu, Cr, As, and Hg) in soils and vegetables in the surrounding area of an 80-year-old zinc smelter in northeastern China. Soil pH, organic matter (SOM), and cation exchange capacity (CEC) were determined, and their relations with heavy metal contents in edible parts of vegetables were analyzed. Results showed that the smelting had led to the significant contamination of the local soils by Cd and Zn, with average concentrations of 3.88 and 403.89 mg kg -1 , respectively. Concentrations of Cd and Zn in greenhouse soils were much lower than those in open farmland soils. Cd concentrations in vegetable edible parts exceeded the permissible limits severely, while other metal concentrations were much lower than the corresponding standards. Leaf and root vegetables had higher concentrations and bioaccumulation factors (BCFs) of Cd than fruit vegetables. Hazard quotient and hazard index showed that cadmium is imposing a health risk to local residents via vegetable consumption. Cd uptake of some vegetables can be predicted by empirical models with the following parameters: soil pH, SOM, CEC, Zn concentrations, and Cd concentrations. Vegetables such as cabbage, Chinese cabbage, tomato, cucumber, and green bean were screened out as being suitable to grow in the studied area.

Transport and fate of radionuclides in aquatic environments--the use of ecosystem modelling for exposure assessments of nuclear facilities.

PubMed

Kumblad, L; Kautsky, U; Naeslund, B

2006-01-01

In safety assessments of nuclear facilities, a wide range of radioactive isotopes and their potential hazard to a large assortment of organisms and ecosystem types over long time scales need to be considered. Models used for these purposes have typically employed approaches based on generic reference organisms, stylised environments and transfer functions for biological uptake exclusively based on bioconcentration factors (BCFs). These models are of non-mechanistic nature and involve no understanding of uptake and transport processes in the environment, which is a severe limitation when assessing real ecosystems. In this paper, ecosystem models are suggested as a method to include site-specific data and to facilitate the modelling of dynamic systems. An aquatic ecosystem model for the environmental transport of radionuclides is presented and discussed. With this model, driven and constrained by site-specific carbon dynamics and three radionuclide specific mechanisms: (i) radionuclide uptake by plants, (ii) excretion by animals, and (iii) adsorption to organic surfaces, it was possible to estimate the radionuclide concentrations in all components of the modelled ecosystem with only two radionuclide specific input parameters (BCF for plants and Kd). The importance of radionuclide specific mechanisms for the exposure to organisms was examined, and probabilistic and sensitivity analyses to assess the uncertainties related to ecosystem input parameters were performed. Verification of the model suggests that this model produces analogous results to empirically derived data for more than 20 different radionuclides.

Soil-plant transfer models for metals to improve soil screening value guidelines valid for São Paulo, Brazil.

PubMed

Dos Santos-Araujo, Sabrina N; Swartjes, Frank A; Versluijs, Kees W; Moreno, Fabio Netto; Alleoni, Luís R F

2017-11-07

In Brazil, there is a lack of combined soil-plant data attempting to explain the influence of specific climate, soil conditions, and crop management on heavy metal uptake and accumulation by plants. As a consequence, soil-plant relationships to be used in risk assessments or for derivation of soil screening values are not available. Our objective in this study was to develop empirical soil-plant models for Cd, Cu, Pb, Ni, and Zn, in order to derive appropriate soil screening values representative of humid tropical regions such as the state of São Paulo (SP), Brazil. Soil and plant samples from 25 vegetable species in the production areas of SP were collected. The concentrations of metals found in these soil samples were relatively low. Therefore, data from temperate regions were included in our study. The soil-plant relations derived had a good performance for SP conditions for 8 out of 10 combinations of metal and vegetable species. The bioconcentration factor (BCF) values for Cd, Cu, Ni, Pb, and Zn in lettuce and for Cd, Cu, Pb, and Zn in carrot were determined under three exposure scenarios at pH 5 and 6. The application of soil-plant models and the BCFs proposed in this study can be an important tool to derive national soil quality criteria. However, this methodological approach includes data assessed under different climatic conditions and soil types and need to be carefully considered.

Phytoremediation of mercury-contaminated soils by Jatropha curcas.

PubMed

Marrugo-Negrete, José; Durango-Hernández, José; Pinedo-Hernández, José; Olivero-Verbel, Jesús; Díez, Sergi

2015-05-01

Jatropha curcas plants species were tested to evaluate their phytoremediation capacity in soils contaminated by different levels of mercury. The experimental treatments consisted of four levels of mercury concentrations in the soil - T0, T1, T5, and T10 (0, 1, 5, and 10 μg Hg per g soil, respectively). The total mercury content absorbed by the different plant tissues (roots, stems and leaves) was determined during four months of exposure. The growth behavior, mercury accumulation, translocation (TF) and bioconcentration (BCF) factors were determined. The different tissues in J. curcas can be classified in order of decreasing accumulation Hg as follows: roots>leaves>stems. The highest cumulative absorption of the metal occurred between the second and third month of exposure. Maximum TF was detected during the second month and ranged from 0.79 to 1.04 for the different mercury concentrations. Values of BCF ranged from 0.21 to 1.43. Soils with T1 showed significantly higher BCF (1.43) followed by T10 (1.32) and T5 (0.91), all of them at the fourth month. On the other hand TFs were low (range 0.10-0.26) at the en of the experiment. The maximum reduction of biomass (16.3%) occurred for T10 (10 μg Hg g(-1)). In sum, J. curcas species showed high BCFs and low TFs, and their use could be a promising approach to remediating mercury-contaminated soils. Copyright © 2015 Elsevier Ltd. All rights reserved.

Influence of additive L-phenylalanine on stabilization of metastable α-form of L-glutamic acid in cooling crystallization

NASA Astrophysics Data System (ADS)

Quang, Khuu Chau; Nhan, Le Thi Hong; Huyen, Trinh Thi Thanh; Tuan, Nguyen Anh

2017-09-01

The influence of additive amino acid L-phenylalanine on stabilization of metastable α-form of L-glutamic acid was investigated in cooling crystallization. The present study found that the additive L-phenylalanine could be used to stabilize the pure metastable α-form in L-glutamic acid crystallization, where the additive concentration of 0.05-0.1 (g/L) was sufficient to stabilize the 100% wt metastable α-form in solid product at L-glutamic acid concentration of 30-45 (g/L). Additionally, the present results indicated that the adsorption of additive L-phenylalanine on the (001) surface of α-form was more favorable than that of the β-form molecular, so the nucleation sites of stable β-form was occupied by additive molecular, which resulted in inhibition of nucleation and growth of β-form, allowing stabilization of metastable α-form.

Saturated fatty acids and fatty acid esters promote the polymorphic transition of clarithromycin metastable form I crystal.

PubMed

Watanabe, Miteki; Mizoguchi, Midori; Aoki, Hajime; Iwao, Yasunori; Noguchi, Shuji; Itai, Shigeru

2016-10-15

The phase transition of active pharmaceutical ingredients should be taken into account during manufacturing, processing- and storage, because different crystal forms lead to different physical properties of formulations. The phase transition of clarithromycin (CAM) metastable form I to stable form II was investigated on heating with additives such as fatty acids or fatty acid esters. Differential scanning calorimetry analyses revealed that when form I was heated with additives, the phase transition temperature of form I decreased close to the melting points of the additives. Powder X-ray diffraction analyses indicated the tentative presence of a non-crystalline component during the transition of form I to form II on heating with additives. These observations implied that CAM form I dissolved in the melted additives on heating and the dissolved CAM crystallized to form II. Reduction of transition temperatures in the presence of additives were also observed for the crystals of nifedipine form B and carbamazepine form III. These results suggested that the phenomena can be widely applicable for simultaneous crystalline phase transition and granulation using binder additives. Copyright © 2016 Elsevier B.V. All rights reserved.

Bioconcentration of two basic pharmaceuticals, verapamil and clozapine, in fish.

PubMed

Nallani, Gopinath C; Edziyie, Regina E; Paulos, Peter M; Venables, Barney J; Constantine, Lisa A; Huggett, Duane B

2016-03-01

The present study examined the bioconcentration of 2 basic pharmaceuticals: verapamil (a calcium channel blocker) and clozapine (an antipsychotic compound) in 2 fresh water fishes, fathead minnow and channel catfish. In 4 separate bioconcentration factor (BCF) experiments (2 chemicals × 1 exposure concentration × 2 fishes), fathead minnow and channel catfish were exposed to 190 μg/L and 419 μg/L of verapamil (500 μg/L nominal) or 28.5 μg/L and 40 μg/L of clozapine (50 μg/L nominal), respectively. Bioconcentration factor experiments with fathead consisted of 28 d uptake and 14 d depuration, whereas tests conducted on catfish involved a minimized test design, with 7 d each of uptake and depuration. Fish (n = 4-5) were sampled during exposure and depuration to collect different tissues: muscle, liver, gills, kidneys, heart (verapamil tests only), brain (clozapine tests only), and blood plasma (catfish tests only). Verapamil and clozapine concentrations in various tissues of fathead and catfish were analyzed using liquid chromatography-mass spectrometry. In general, higher accumulation rates of the test compounds were observed in tissues with higher perfusion rates. Accumulation was also high in tissues relevant to pharmacological targets in mammals (i.e. heart in verapamil test and brain in the clozapine test). Tissue-specific BCFs (wet wt basis) for verapamil and clozapine ranged from 0.7 to 75 and from 31 to 1226, respectively. Tissue-specific concentration data were used to examine tissue-blood partition coefficients. © 2016 SETAC.

Health and environmental effects profile for pentachloronitrobenzene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choudhury, H.; Coleman, J.; Mink, F.L.

1987-03-01

Pure pentachloronitrobenzene (PCNB) is a colorless crystalline solid. The commercial product may have a light-yellow to cream color with a musty odor. It is practically insoluble in a number of organic solvents. The compound is reasonably stable but may undergo hydrolysis in a strong alkaline medium. In 1983, Olin Corp., Leland, MS, was the only manufacturer of PCNB in the United States. No data for U.S. production volume for this chemical are available, but recent production source data suggest that this chemical is no longer commercially produced in the United States. The primary usage of PCNB is as a soilmore » fungicide for a wide variety of crops and in seed treatment. The fate of PCNB in water has not been comprehensively studied. Only qualitative data regarding fate and transport in water are available. The half-life of PCNB in the water phase was estimated to be 1.8 days. The two processes reported to be most responsible for the rapid decrease in PCNB concentration in water were volatilization and sorption to seston and biota, followed by sedimentation as detritus. Neither biodegradation nor photolysis appears to be a significant process for the loss of PCNB from water. The BCFs for PCNB in the golden orfe, Leucisens idus melanotus, and in rainbow trout, Salmo gairdneri, were reported to be 950-1130 and 260-590, respectively. It therefore appears that PCNB will moderately bioaccumulate in aquatic organisms. Pertinent data regarding the fate and transport of PCNB in air could not be located in the available literature as cited in the Appendix.« less

Phthalate esters contamination in soil and plants on agricultural land near an electronic waste recycling site.

PubMed

Ma, Ting Ting; Christie, Peter; Luo, Yong Ming; Teng, Ying

2013-08-01

The accumulation of phthalic acid esters (PAEs) in soil and plants in agricultural land near an electronic waste recycling site in east China has become a great threat to the neighboring environmental quality and human health. Soil and plant samples collected from land under different utilization, including fallow plots, vegetable plots, plots with alfalfa (Medicago sativa L.) as green manure, fallow plots under long-term flooding and fallow plots under alternating wet and dry periods, together with plant samples from relative plots were analyzed for six PAE compounds nominated as prior pollutants by USEPA. In the determined samples, the concentrations of six target PAE pollutants ranged from 0.31-2.39 mg/kg in soil to 1.81-5.77 mg/kg in various plants (dry weight/DW), and their bioconcentration factors (BCFs) ranged from 5.8 to 17.9. Health risk assessments were conducted on target PAEs, known as typical environmental estrogen analogs, based on their accumulation in the edible parts of vegetables. Preliminary risk assessment to human health from soil and daily vegetable intake indicated that DEHP may present a high-exposure risk on all ages of the population in the area by soil ingestion or vegetable consumption. The potential damage that the target PAE compounds may pose to human health should be taken into account in further comprehensive risk assessments in e-waste recycling sites areas. Moreover, alfalfa removed substantial amounts of PAEs from the soil, and its use can be considered a good strategy for in situ remediation of PAEs.

Bioaccumulation of heavy metals both in wild and mariculture food chains in Daya Bay, South China

NASA Astrophysics Data System (ADS)

Qiu, Yao-Wen

2015-09-01

Bioaccumulation and trophic transfer of heavy metals both in the natural marine ecosystem (seawater, sediment, coral reef, phytoplankton, macrophyte, shrimp, crab, shellfish, planktivorous and carnivorous fish) and in the mariculture ecosystem (compound feed, trash fish, farmed pompano and snapper) were studied at Daya Bay, a typical subtropical bay in Southern China. The levels of Cu, Zn, Pb and Cd in sediment were 11.7, 10.2, 53.8 and 2.8 times than those in coral reef, respectively. Pb and Zn levels were markedly higher in phytoplankton than in macrophyte, probably caused by the larger specific surface area in phytoplankton. The highest levels of Zn (98.1), Pb (1.87) and Cd (5.11 μg g-1 dw) in wild organisms were all found in clam (Veremolpa scabra), indicating that these metals were apt to bioaccumulate in shellfish. The average concentrations of Cu, Zn, Pb and Cd in wild fish were 3.7, 2.1, 0.4 and 22.2 times than those in farmed fish, confirming the "growth dilution" hypothesis in farmed fish. Heavy metal bioconcentration factors (BCFs) in algae, bioaccumulation factors (BAFs) in wild species and transfer factors (TFs) in organism were calculated and discussed. The results suggested that biologically essential Cu and Zn were easier to accumulate in fish than non-essential Cd. Concentrations of Cu, Zn and Cd were several times higher in wild fish than in farmed fish whereas the opposite was observed for Pb. This metal also showed the highest transfer factor from food, which means that special attention must be given to fish feed production in relation to metal contamination.

Steroids in marine aquaculture farms surrounding Hailing Island, South China: occurrence, bioconcentration, and human dietary exposure.

PubMed

Liu, Shan; Chen, Hui; Xu, Xiang-Rong; Liu, Shuang-Shuang; Sun, Kai-Feng; Zhao, Jian-Liang; Ying, Guang-Guo

2015-01-01

The occurrence, bioconcentration, and human dietary exposure via seafood consumption of 24 steroids were investigated by rapid resolution liquid chromatography-tandem mass spectrometry (RRLC-MS/MS) in six typical marine aquaculture farms surrounding Hailing Island, South China. Ten, 9, 10, 15 of 24 steroids were detected at concentrations ranging from <0.1 (testosterone) to 40 ng/L (prednisolone), from 0.1 (4-androstene-3,17-dione) to 2.4 ng/g (progesterone), from 0.3 ng/g (testosterone) to 21.4 ng/g (epi-androsterone), and from <0.1 (testosterone) to 560 ng/g (cortisol) (wet weight) in the water, sediment, feed and biota samples, respectively. Synthetic steroids (androsta-1,4-diene-3,17-dione, 17α-boldenone, 17β-boldenone, 17β-trenbolone, prednisolone, norgestrel) were detected in the feed samples, clearly demonstrating the illegal use of steroids in the feed. The field bioconcentration factors (BCFs) of steroids calculated in different aquatic organisms ranged from 93.8 to 4000. The estimated daily intakes (EDIs) of androgens, glucocorticoids, and progestagens via consumption of seafood (i.e., shrimps, crabs, mollusks, and fish) for different age groups were in the range of 33.4-134, 2061-8566, and 40.4-155 ng/d for children (2-5 years), youth (6-18 years), and adults (>18 years), respectively. Even though no significant risk from dietary exposure arises from individual steroid, elevated risk to humans can result from the occurrence of multiple steroids in the seafood raised in the aquaculture farms, especially for the sensitive populations, such as pregnant women and children. Copyright © 2014 Elsevier B.V. All rights reserved.

A new predictive model for the bioconcentration factors of polychlorinated biphenyls (PCBs) based on the molecular electronegativity distance vector (MEDV).

PubMed

Qin, Li-Tang; Liu, Shu-Shen; Liu, Hai-Ling; Ge, Hui-Lin

2008-02-01

Polychlorinated biphenyls (PCBs) are some of the most prevalent pollutants in the total environment and receive more and more concerns as a group of ubiquitous potential persistent organic pollutants. Using the variable selection and modeling based on prediction (VSMP), the molecular electronegativity distance vector (MEDV) derived directly from the molecular topological structures was employed to develop a linear model (MI) between the bioconcentration factors (BCF) and two MEDV descriptors of 58 PCBs. The MI model showed a good estimation ability with a correlation coefficient (r) of 0.9605 and a high stability with a leave-one-out cross-validation correlation coefficient (q) of 0.9564. The MEDV-base model (MI) is easier to use than the splinoid poset method reported by Ivanciuc et al. [Ivanciuc, T., Ivanciuc, O., Klein, D.J., 2006. Modeling the bioconcentration factors and bioaccumulation factors of polychlorinated biphenyls with posetic quatitative super-structure/activity relationships (QSSAR). Mol. Divers. 10, 133-145] and gives a better statistics than molecular connectivity index (MCI)-base model developed by Hu et al. [Hu, H.Y., Xu, F.L., Li, B.G., Cao, J., Dawson, R., Tao, S., 2005. Prediction of the bioconcentration factor of PCBs in fish using the molecular connectivity index and fragment constant models. Water Environ. Res. 77, 87-97]. Main structural factors influencing the BCF of PCBs are the substructures expressed by two atomic groups >C= and -CH=. 58 PCBs were divided into an "odd set" and "even set" in order to ensure the predicted potential of the MI for the external samples. It was shown that three models, MI, MO for "odd set", and ME for "even set", can be used to predict the BCF of remaining 152 PCBs in which the experimental BCFs are not available.

Clinical outcomes of whole pelvis radiotherapy and stereotactic body radiotherapy boost for intermediate- and high-risk prostate cancer.

PubMed

Kim, Hun Jung; Phak, Jeong Hoon; Kim, Woo Chul

2017-10-01

We report our experience with Cyberknife to deliver hypofractionated stereotactic body radiotherapy (SBRT) boost combined with whole pelvis radiotherapy (WPRT) to patients with intermediate- to high-risk prostate cancer. From March 2008 to July 2014, 39 patients with newly diagnosed, intermediate- and high-risk (National Comprehensive Cancer Network definition) localized prostate cancer were treated with WPRT and SBRT boost. The whole pelvis dose was 45 Gy (25 fractions of 1.8 Gy) and the SBRT boost dose was 21 Gy (3 fractions of 7 Gy). No one received androgen deprivation therapy before biochemical relapse. The acute and late toxicities were recorded using the Radiation Therapy Oncology Group scale. Prostate-specific antigen (PSA) response was monitored. Thirty-nine patients with a median 53.6 months (range 14-74 months) follow-up were analyzed. The median pretreatment PSA was 15.97 ng/mL. The estimated 5-year biochemical failure (BCF)-free survival was 94.7%. Two BCFs were observed in only high-risk group. The median PSA nadir was 0.30 ng/mL at median 36 months and PSA bounce occurred in 15.4% (n = 6) of patients at median 12 months. No grade 3 acute toxicity was noted. A total of 23% of the patients had grade 2 acute genitourinary (GU) toxicities and 21% had grade 2 acute gastrointestinal (GI) toxicities. At 2 months, most complications had returned to baseline. GU and GI toxicities were observed. WPRT followed by SBRT boost using Cyberknife in intermediate- and high-risk prostate cancer is feasible with minimal toxicity and encouraging BCF-free survival. © 2016 John Wiley & Sons Australia, Ltd.

Tracking aquaculture-derived fluoroquinolones in a mangrove wetland, South China.

PubMed

Liu, Xiao; Liu, Yu; Xu, Jian-Rong; Ren, Ke-Jun; Meng, Xiang-Zhou

2016-12-01

Aquaculture in mangrove wetlands has been developed rapidly, causing various environmental problems (e.g., antibiotic residue). In the present study, the levels and distributions of a well-known class of antibiotics (fluoroquinolones; FQs), including norfloxacin (NOR), ciprofloxacin (CIP), and enrofloxacin (ENR), were examined in sediment and mangrove plant (Aegiceras corniculatum) from a mangrove wetland in the Zhanjiang Mangrove National Nature Reserve, South China. NOR and CIP were detected in all sediment samples, with concentrations ranging from 4.3 to 64.2 ng/g and from 7.62 to 68.5 ng/g on a basis of dry weight (dw), respectively, whereas ENR was found with relatively lower frequency (<78%) and lower concentrations (<19.3 ng/g). Sediments in mangrove rhizosphere area contained considerably higher concentrations of all FQs (except for ENR). FQs were largely varied in mangrove plant tissues; NOR and ENR were not detected in leaf and root samples, respectively. CIP featured an increasing tendency from the root to the upper parts of plants, whereas a decreasing trend was found for NOR. Three bioconcentration factors (BCF s ) of FQs, including BCFs for roots (BCF r ), branches (BCF b ), and leaves (BCF l ) were calculated, and most of them exceeded 1. Especially for NOR, its BCF r can reach up to 9.9, indicating that Aegiceras corniculatum has a strong ability to accumulate FQs from sediment and/or surrounding environment. For NOR and CIP, strong positive relationships were observed between BCF r and concentrations in root, but no significant correlations were observed between BCF r and root lipid of mangrove plant. More studies are needed to investigate the uptake mechanism of antibiotics in mangrove plants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Acute toxicity of 4-nitrophenol, 2,4-dinitrophenol, terbufos and trichlorfon to grass shrimp (Palaemonetes spp.) and sheepshead minnows (Cyprinodon variegatus) as affected by salinity and temperature

USGS Publications Warehouse

Brecken-Folse, J. A.; Mayer, F.L.; Pedigo, L.E.; Marking, L.L.

1994-01-01

The toxicities of two industrial chemicals (4-nitrophenol and 2,4-dinitrophenol) and two organophosphate insecticides (terbufos and trichlorfon) to juvenile grass shrimp (Palaemonetes spp.) and sheepshead minnows (Cyprinodon vanegatus) were determined by static, 96-h toxicity tests in a factorial design with 12 combinations of salinity and temperature (15, 20, 25, 30ppt x 17, 22, 27°C). Concentrations of the toxicants, including bioconcentradon, were determined as appropriate by gas or liquid chromatography and the use of 14C-labeled compounds. The 96-h LC50s for 4-nitrophenol ranged from 12 to 31 mg/L and for 2,4-dinitrophenol from 13 to 50 mg/L. Toxicity decreased as salinity increased for 4-nitrophenol and both test organisms. Toxicity decreased as salinity increased for 2,4-dinitrophenol and sheepshead minnows, but toxicity to grass shrimp increased as salinity increased. Toxicity decreased with increased temperature for grass shrimp exposed to 2,4-dinitrophenol and sheepshead minnows exposed to 4-nitrophenol, increased with temperature for sheepshead minnows exposed to 2,4-dinitrophenol, and no change was observed for grass shrimp exposed to 4-nitrophenol. Bioconcentration of phenols in both test organisms increased as concentration increased. The 96-h LC50s for terbufos ranged from 3.4 to 6.6 μg/L and for trichlorfon from 6.3 to 19,300 μg/L. Terbufos and trichlorfon toxicity to grass shrimp and sheepshead minnows increased with increased temperature. BCFs for terbufos were greater in sheepshead minnows than grass shrimp, but were reversed for trichlorfon.

Occurrence and distribution of antibiotics in mariculture farms, estuaries and the coast of the Beibu Gulf, China: Bioconcentration and diet safety of seafood.

PubMed

Zhang, Ruiling; Pei, Jiying; Zhang, Ruijie; Wang, Shaopeng; Zeng, Weibin; Huang, Dali; Wang, Yi; Zhang, Yuanyuan; Wang, Yinghui; Yu, Kefu

2018-06-15

The occurrence, distribution, bioconcentration and diet safety via seafood consumption of 19 antibiotics were investigated in eight closed mariculture ponds, four estuaries, two nearshore areas and one offshore area from the Beibu Gulf. Seventeen, 16, 15 and 7 antibiotics were detected at total concentrations of 43.2 - 885 ng L -1 , 22.4 - 118 ng L -1 , 22.7 - 24.5 ng L -1 , and 1.81-3.23 ng L -1 in the water of the above different areas, respectively. This indicates that the mariculture ponds are important sources of antibiotic pollution on the coast of the Beibu Gulf. Ten antibiotics were detected in feed samples with concentrations ranging from 0.03 to 95.4 ng g -1 , demonstrating the presence of antibiotics in the feed and/or residual antibiotics in the raw material of the feed. The field bioconcentration factors (BCFs) of the antibiotics calculated in different culture organisms ranged from 0.55 to 10,774 L kg -1 . The estimated daily intakes (EDIs) of sulphonamides, fluoroquinolones, macrolides and chloramphenicols via aquatic products were 19.8-105, 33.7-178, 34.9-186 and 6.9-37.1 ng d -1 , respectively. According to the acceptable daily intakes (ADIs) and maximum residue limits (MRLs) proposed by different organisations, these aquatic products (shrimp, crab and oyster) reached the standard of safe consumption and could not pose a health risk to humans. However, a potential elevated risk to humans may remain because of the occurrence of multiple antibiotics in the cultured organisms, particularly for sensitive populations, such as pregnant women, the elderly and children. Copyright © 2018 Elsevier Inc. All rights reserved.

Optimal choice of pH for toxicity and bioaccumulation studies of ionizing organic chemicals.

PubMed

Rendal, Cecilie; Kusk, Kresten Ole; Trapp, Stefan

2011-11-01

It is recognized that the pH of exposure solutions can influence the toxicity and bioaccumulation of ionizing compounds. The present study investigates whether it can be considered a general rule that an ionizable compound is more toxic and more bioaccumulative when in the neutral state. Three processes were identified to explain the behavior of ionizing compounds with changing pH: the change in lipophilicity when a neutral compound becomes ionized, electrical attraction, and the ion trap. The literature was screened for bioaccumulation and toxicity tests of ionizing organic compounds performed at multiple pH levels. Toxicity and bioconcentration factors (BCFs) were higher for acids at lower pH values, whereas the opposite was true for bases. The effect of pH was most pronounced when pH - pK(a) was in the range of -1 to 3 for acids, and -3 to 1 for bases. The factor by which toxicity and BCF changed with pH was correlated with the lipophilicity of the compound (log K(OW) of the neutral compound). For both acids and bases, the correlation was positive, but it was significant only for acids. Because experimental data in the literature were limited, results were supplemented with model simulations using a dynamic flux model based on the Fick-Nernst-Planck diffusion equation known as the cell model. The cell model predicts that bases with delocalized charges may in some cases show declining bioaccumulation with increasing pH. Little information is available for amphoteric and zwitterionic compounds; however, based on simulations with the cell model, it is expected that the highest toxicity and bioaccumulation of these compounds will be found where the compounds are most neutral, at the isoelectric point. Copyright © 2011 SETAC.

Mathematical relationships between metrics of chemical bioaccumulation in fish.

PubMed

Mackay, Don; Arnot, Jon A; Gobas, Frank A P C; Powell, David E

2013-07-01

Five widely used metrics of bioaccumulation in fish are defined and discussed, namely the octanol-water partition coefficient (KOW ), bioconcentration factor (BCF), bioaccumulation factor (BAF), biomagnification factor (BMF), and trophic magnification factor (TMF). Algebraic relationships between these metrics are developed and discussed using conventional expressions for chemical uptake from water and food and first-order losses by respiration, egestion, biotransformation, and growth dilution. Two BCFs may be defined, namely as an equilibrium partition coefficient KFW or as a nonequilibrium BCFK in which egestion losses are included. Bioaccumulation factors are shown to be the product of the BCFK and a novel equilibrium multiplier M containing 2 ratios, namely, the diet-to-water concentration ratio and the ratio of uptake rate constants for respiration and dietary uptake. Biomagnification factors are shown to be proportional to the lipid-normalized ratio of the predator/prey values of BCFK and the ratio of the equilibrium multipliers. Relationships with TMFs are also discussed. The effects of chemical hydrophobicity, biotransformation, and growth are evaluated by applying the relationships to a range of illustrative chemicals of varying KOW in a linear 4-trophic-level food web with typical values for uptake and loss rate constants. The roles of respiratory and dietary intakes are demonstrated, and even slow rates of biotransformation and growth can significantly affect bioaccumulation. The BCFK s and the values of M can be regarded as the fundamental determinants of bioaccumulation and biomagnification in aquatic food webs. Analyzing data from food webs can be enhanced by plotting logarithmic lipid-normalized concentrations or fugacities as a linear function of trophic level to deduce TMFs. Implications for determining bioaccumulation by laboratory tests for regulatory purposes are discussed. Copyright © 2013 SETAC.

Comprehensive review on additives of topical dosage forms for drug delivery.

PubMed

Garg, Tarun; Rath, Goutam; Goyal, Amit K

2015-12-01

Skin is the largest organ of the human body and plays the most important role in protecting against pathogen and foreign matter. Three important modes such as topical, regional and transdermal are widely used for delivery of various dosage forms. Among these modes, the topical dosage forms are preferred because it provides local therapeutic activity when applied to the skin or mucous membranes. Additives or pharmaceutical excipients (non-drug component of dosage form) are used as inactive ingredients in dosage form or tools for structuring dosage forms. The main use of topical dosage form additives are controling the extent of absorption, maintaining the viscosity, improving the stability as well as organoleptic property and increasing the bulk of the formulation. The overall goal of this article is to provide the clinician with information related to the topical dosage form additives and their current major applications against various diseases.

Effect of surfactants or a water soluble polymer on the crystal transition of clarithromycin during a wet granulation process.

PubMed

Nozawa, Kenji; Iwao, Yasunori; Noguchi, Shuji; Itai, Shigeru

2015-11-10

To generate products containing a stable form of clarithromycin (CAM) (form II) regardless of the initial crystal form of CAM or type of granulation solvent, the effects of five surfactants, or a water-soluble polymer (macrogol 400) were determined on the crystal transition of CAM. The metastable form (form I) was kneaded with water, after adding surfactants, or a water-soluble polymer. Form II was also kneaded with ethanol, after adding the same additives. The resulting samples were analyzed by powder X-ray diffraction. Form I was completely converted to form II by a wet granulation using water with additives bearing polyoxyethylene chains such as polysorbate 80 (PS80), polyoxyl 40 stearate or macrogol 400. The granulation of the form II using ethanol with these additives did not result in a crystal transition to form I. Furthermore, CAM tablets were manufactured using granules with PS80, and these crystal forms and dissolution behaviors were investigated. As a result, the wet granulation of CAM with PS80 gave CAM tablets containing only form II and PS80 did not have any adverse effects on tablet characteristics. Therefore, these data suggests that the crystal form of CAM can be controlled to be form II using a wet granulation process with additives bearing polyoxyethylene chains regardless of the initial crystal form of CAM or type of granulation solvent. Copyright © 2015 Elsevier B.V. All rights reserved.

The effect of additive geometry on the integration of secondary elements during Friction Stir Processing

NASA Astrophysics Data System (ADS)

Zens, A.; Gnedel, M.; Zaeh, M. F.; Haider, F.

2018-06-01

Friction Stir Processing (FSP) can be used to locally modify properties in materials such as aluminium. This may be used, for example, to produce a fine microstructure or to integrate secondary elements into the base material. The purpose of this work is to examine the effect of the properties of the metal additives on the resulting material distribution in the processed region. For this, commercially pure iron and copper were integrated into an EN AW-1050 aluminium base material using FSP. Iron in the form of powder, wire and foil as well as copper in powder form were assessed. The various additive forms represent materials with differing surface-to-volume ratios as well as varying dispersion characteristics in the processing zone. The processing parameters for each additive form remained constant; however, two- and four-pass FSP processes were conducted. The results of CT analysis proved especially insightful regarding the spatial distribution of the various additive form within the workpiece. As expected, the powder additive was most widely distributed within the welding zone. Micro-hardness mappings showed that the powder additive contributed to the hardness within the weld nugget in comparison to the processed material without secondary elements.

Additive manufacturing method for SRF components of various geometries

DOEpatents

Rimmer, Robert; Frigola, Pedro E; Murokh, Alex Y

2015-05-05

An additive manufacturing method for forming nearly monolithic SRF niobium cavities and end group components of arbitrary shape with features such as optimized wall thickness and integral stiffeners, greatly reducing the cost and technical variability of conventional cavity construction. The additive manufacturing method for forming an SRF cavity, includes atomizing niobium to form a niobium powder, feeding the niobium powder into an electron beam melter under a vacuum, melting the niobium powder under a vacuum in the electron beam melter to form an SRF cavity; and polishing the inside surface of the SRF cavity.

75 FR 68608 - Information Collection; Request for Authorization of Additional Classification and Rate, Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... Authorization of Additional Classification and Rate, Standard Form 1444 AGENCY: Department of Defense (DOD... of Additional Classification and Rate, Standard Form 1444. DATES: Comments may be submitted on or.../or business confidential information provided. FOR FURTHER INFORMATION CONTACT: Mr. Ernest Woodson...

Impact of the rate of the additive process of forming a heavy structure deforming in creep on the development of its technological stresses

NASA Astrophysics Data System (ADS)

Parshin, Dmitry A.

2018-05-01

The additive process of forming a semicircular arched structure by means of layer-by-layer addition of material to its inner surface is simulated. The impact of this process running mode on the development of the technological stresses fields in the structure being formed under the action of gravity under properties of the material creep and aging is examined. In the framework of the linear mechanics of accreted solids a mathematical model of the process under study is offered and numerical experiments are conducted. It is shown that the stress-strain state of the additively formed heavy objects decisively depends on their formation mode. Various practically important trends and features of this dependence are studied.

75 FR 35119 - 60-Day Notice of Proposed Information Collection: Form DS-4085 Application for Additional Visa...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... DS-4085 Application for Additional Visa Pages or Miscellaneous Passport Services, OMB Control Number... of Information Collection: Application for Additional Visa Pages or Miscellaneous Passport Services.... Originating Office: Bureau of Consular Affairs, Passport Services CA/PPT. Form Number: DS-4085. Respondents...

76 FR 5375 - Submission for OMB Review; Request for Authorization of Additional Classification and Rate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-31

... for Authorization of Additional Classification and Rate, Standard Form 1444 AGENCIES: Department of... Request for Authorization of Additional Classification and Rate, Standard Form 1444. A notice published in... personal and/or business confidential information provided. FOR FURTHER INFORMATION CONTACT: Ms. Clare...

Article and method of forming an article

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Dutta, Sandip

Provided are an article and a method of forming an article. The method includes providing a metallic powder, heating the metallic powder to a temperature sufficient to joint at least a portion of the metallic powder to form an initial layer, sequentially forming additional layers in a build direction by providing a distributed layer of the metallic powder over the initial layer and heating the distributed layer of the metallic powder, repeating the steps of sequentially forming the additional layers in the build direction to form a portion of the article having a hollow space formed in the build direction,more » and forming an overhang feature extending into the hollow space. The article includes an article formed by the method described herein.« less

31 CFR 1024.320 - Reports by mutual funds of suspicious transactions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the Financial Crimes Enforcement Network in accordance with the instructions to the Form SAR-SF. (3... delay filing a Form SAR-SF for an additional 30 calendar days to identify a suspect, but in no case...-866-556-3974 in addition to filing timely a Form SAR-SF if required by this section. The mutual fund...

31 CFR 1024.320 - Reports by mutual funds of suspicious transactions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the Financial Crimes Enforcement Network in accordance with the instructions to the Form SAR-SF. (3... delay filing a Form SAR-SF for an additional 30 calendar days to identify a suspect, but in no case...-866-556-3974 in addition to filing timely a Form SAR-SF if required by this section. The mutual fund...

31 CFR 1024.320 - Reports by mutual funds of suspicious transactions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the Financial Crimes Enforcement Network in accordance with the instructions to the Form SAR-SF. (3... delay filing a Form SAR-SF for an additional 30 calendar days to identify a suspect, but in no case...-866-556-3974 in addition to filing timely a Form SAR-SF if required by this section. The mutual fund...

Chemical analysis of fish bile extracts for monitoring endocrine disrupting chemical exposure in water: Bisphenol A, alkylphenols, and norethindrone.

PubMed

Wu, Minghong; Pan, Chenyuan; Yang, Ming; Xu, Bentuo; Lei, Xiangjie; Ma, Jing; Cai, Ling; Chen, Jingsi

2016-01-01

The present study determined concentrations of estrogenic bisphenol A (BPA), nonylphenol, octylphenol (4-tert-octylphenol), butylphenol (4-tert-butylphenol), and progestogenic norethindrone by liquid chromatography-tandem mass spectrometry in bile extracts from field fish from the Xin'an River and market fish in Shanghai, China. Compared with the field fish, endocrine disrupting chemical (EDC) concentrations in market fish bile were at relatively high levels with high detectable rates. The average concentrations of BPA, nonylphenol, 4-tert-octylphenol, 4-tert-butylphenol, and norethindrone in field fish bile were 30.1 µg/L, 203 µg/L, 4.69 µg/L, 7.84 µg/L, and 0.514 µg/L, respectively; in market fish bile they were 240 µg/L, 528 µg/L, 76.5 µg/L, 12.8 µg/L, and 5.26 µg/L, respectively; and in the surface water of Xin'an River they were 38.8 ng/L, 7.91 ng/L, 1.98 ng/L, 2.66 ng/L, and 0.116 ng/L, respectively. The average of total estrogenic activity of river water was 3.32 ng/L estradiol equivalents. High bioconcentration factors (BCFs) were discovered for all 5 EDCs (≧998-fold) in field fish bile. Furthermore, the authors analyzed the BCF value of BPA in fish bile after 30-d exposure to environmentally relevant concentrations of BPA in the laboratory, and the analysis revealed that BCF in fish bile (BCF(Fish bile)) changed in an inverse concentration-dependent manner based on the log10-transformed BPA concentration in water. Strikingly, the data from the field study were well fitted within this trend. The data together suggested that analysis of fish bile extracts could be an efficient method for assessing waterborne EDCs exposure for aquatic biota. © 2015 SETAC.

Perfluorinated alkyl substances in water, sediment, plankton and fish from Korean rivers and lakes: a nationwide survey.

PubMed

Lam, Nguyen-Hoang; Cho, Chon-Rae; Lee, Jung-Sick; Soh, Ho-Young; Lee, Byoung-Cheun; Lee, Jae-An; Tatarozako, Norihisa; Sasaki, Kazuaki; Saito, Norimitsu; Iwabuchi, Katsumi; Kannan, Kurunthachalam; Cho, Hyeon-Seo

2014-09-01

Water, sediment, plankton, and blood and liver tissues of crucian carp (Carassius auratus) and mandarin fish (Siniperca scherzeri) were collected from six major rivers and lakes in South Korea (including Namhan River, Bukhan River, Nakdong River, Nam River, Yeongsan River and Sangsa Lake) and analyzed for perfluorinated alkyl substances (PFASs). Perfluorooctane sulfonate (PFOS) was consistently detected at the greatest concentrations in all media surveyed with the maximum concentration in water of 15 ng L(-1) and in biota of 234 ng mL(-1) (fish blood). A general ascending order of PFAS concentration of water0.80, p<0.001) were observed between PFOS concentration in blood and liver tissues of both crucian carp and mandarin fish. This result suggests that blood can be used for nonlethal monitoring of PFOS in fish. Overall, the rank order of mean bioconcentration factors (BCFs) of PFOS in biota was; phytoplankton (196 L/kg)

Assessing the risks on human health associated with inorganic arsenic intake from groundwater-cultured milkfish in southwestern Taiwan.

PubMed

Lin, M C; Liao, C M

2008-02-01

The risk of consuming groundwater-cultured milkfish (Chanos chanos) was assessed. Samples of water and milkfish from groundwater-cultured ponds in southwestern Taiwan were analyzed. One third of the 12 sampled ponds had arsenic concentrations in the water higher than 50 microg/L, which is the maximum allowed concentration for arsenic in aquacultural water in Taiwan. Of the total amount of arsenic in water, the percentage of inorganic arsenic was 67.5+/-8.8%. The inorganic arsenic level in milkfish was 44.1+/-10.2%. The bioconcentration factors (BCFs) of milkfish for total arsenic and inorganic arsenic were 11.55+/-4.42 and 6.8+/-2.64, respectively. The target cancer risk (TR) for intake of the milkfish from those ponds was higher than the safe standard 1 x 10(-6), while in 8 of the ponds the TR values were higher than 1 x 10(-4). Among the 12 ponds, 7 of those had the target hazard quotient (THQ) for intake of the milkfish higher than the safe standard 1. The actual consumption (IRF) of milkfish from most of those ponds were higher than the calculated acceptable consumption (RBIRF), based on TR = 1 x 10(-6)-1 x 10(-4). Only three sampled ponds (Putai 2, Peimen 2 and Peimen 3) did not show differences between the IRF and the RBIRF. Based on the standard TR = 1 x 10(-6), both the risk-based concentration for inorganic arsenic in milkfish (RBC(f)) and the risk-based concentration for inorganic arsenic in pond water (RBC(w)) were lower than the levels of inorganic arsenic in reared milkfish (C(b)) and the concentration of inorganic arsenic in pond water (C(w)), respectively. When the calculation was based on TR = 1 x 10(-4), only one sampled pond (Putai 3) had a RBC(f) value higher than C(b). The inhabitants might be exposed to arsenic pollution with carcinogenic and non-carcinogenic risks.

Pharmaceuticals in water, fish and osprey nestlings in Delaware River and Bay

USGS Publications Warehouse

Bean, Thomas G.; Rattner, Barnett A.; Lazarus, Rebecca S.; Day, Daniel D.; Burket, S. Rebekah; Brooks, Bryan W.; Haddad, Samuel P.; Bowerman, William W.

2018-01-01

Exposure of wildlife to Active Pharmaceutical Ingredients (APIs) is likely to occur but studies of risk are limited. One exposure pathway that has received attention is trophic transfer of APIs in a water-fish-osprey food chain. Samples of water, fish plasma and osprey plasma were collected from Delaware River and Bay, and analyzed for 21 APIs. Only 2 of 21 analytes exceeded method detection limits in osprey plasma (acetaminophen and diclofenac) with plasma levels typically 2–3 orders of magnitude below human therapeutic concentrations (HTC). We built upon a screening level model used to predict osprey exposure to APIs in Chesapeake Bay and evaluated whether exposure levels could have been predicted in Delaware Bay had we just measured concentrations in water or fish. Use of surface water and BCFs did not predict API concentrations in fish well, likely due to fish movement patterns, and partitioning and bioaccumulation uncertainties associated with these ionizable chemicals. Input of highest measured API concentration in fish plasma combined with pharmacokinetic data accurately predicted that diclofenac and acetaminophen would be the APIs most likely detected in osprey plasma. For the majority of APIs modeled, levels were not predicted to exceed 1 ng/mL or method detection limits in osprey plasma. Based on the target analytes examined, there is little evidence that APIs represent a significant risk to ospreys nesting in Delaware Bay. If an API is present in fish orders of magnitude below HTC, sampling of fish-eating birds is unlikely to be necessary. However, several human pharmaceuticals accumulated in fish plasma within a recommended safety factor for HTC. It is now important to expand the scope of diet-based API exposure modeling to include alternative exposure pathways (e.g., uptake from landfills, dumps and wastewater treatment plants) and geographic locations (developing countries) where API contamination of the environment may represent greater risk.

76 FR 60774 - Discontinuance of Form CO in Registration Practices

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

....e., Form TX for nondramatic literary works, Form PA for works of the performing arts, Form VA for works of visual art, Form SR for sound recordings, and Form SE for serials). Additionally, the proposed...

Method of forming aluminum oxynitride material and bodies formed by such methods

DOEpatents

Bakas, Michael P [Ammon, ID; Lillo, Thomas M [Idaho Falls, ID; Chu, Henry S [Idaho Falls, ID

2010-11-16

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

Method for rubblizing an oil shale deposit for in situ retorting

DOEpatents

Lewis, Arthur E.

1977-01-01

A method for rubblizing an oil shale deposit that has been formed in alternate horizontal layers of rich and lean shale, including the steps of driving a horizontal tunnel along the lower edge of a rich shale layer of the deposit, sublevel caving by fan drilling and blasting of both rich and lean overlying shale layers at the distal end of the tunnel to rubblize the layers, removing a substantial amount of the accessible rubblized rich shale to permit the overlying rubblized lean shale to drop to tunnel floor level to form a column of lean shale, performing additional sublevel caving of rich and lean shale towards the proximate end of the tunnel, removal of a substantial amount of the additionally rubblized rich shale to allow the overlying rubblized lean shale to drop to tunnel floor level to form another column of rubblized lean shale, similarly performing additional steps of sublevel caving and removal of rich rubble to form additional columns of lean shale rubble in the rich shale rubble in the tunnel, and driving additional horizontal tunnels in the deposit and similarly rubblizing the overlying layers of rich and lean shale and forming columns of rubblized lean shale in the rich, thereby forming an in situ oil shale retort having zones of lean shale that remain permeable to hot retorting fluids in the presence of high rubble pile pressures and high retorting temperatures.

SFAP: Scan-Tron Forms Analysis Package for the IBM-PC. User's Guide, Version 2.0.

ERIC Educational Resources Information Center

Harnisch, Delwyn L.; And Others

The Scan-Tron Forms Analysis Package (SFAP) is a collection of integrated programs that allow an IBM-PC (or compatible) to collect data from a Scan-Tron 1200 forms reader. In addition to the basic data acquisition capability, the SFAP has additional capabilities related to the viewing and formatting of incoming data. When used in combination with…

Metal-air cell with performance enhancing additive

DOEpatents

Friesen, Cody A; Buttry, Daniel

2015-11-10

Systems and methods drawn to an electrochemical cell comprising a low temperature ionic liquid comprising positive ions and negative ions and a performance enhancing additive added to the low temperature ionic liquid. The additive dissolves in the ionic liquid to form cations, which are coordinated with one or more negative ions forming ion complexes. The electrochemical cell also includes an air electrode configured to absorb and reduce oxygen. The ion complexes improve oxygen reduction thermodynamics and/or kinetics relative to the ionic liquid without the additive.

A novel electrolyte salt additive for lithium-ion batteries with voltages greater than 4.7 V

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Yunchao; Wan, Shun; Veith, Gabriel M.

2016-11-07

Here, lithium bis(2-methyl-2-fluoromalonato)borate (LiBMFMB), as an additive in conventional electrolyte for LiNi 0.5Mn 1.5O 4, exhibits improved coulombic efficiencies and cycling stability. Cyclic voltammograms indicate the cells with additive form good SEIs during the first cycle whereas no additive cell needs more cycles to form a functional SEI. XPS reveals LiBMFMB could reduce the decomposition of LiPF 6 salt and solvents, resulting in thinner SEI.

Formation of chemically bonded ceramics with magnesium dihydrogen phosphate binder

DOEpatents

Wagh, Arun S.; Jeong, Seung-Young

2004-08-17

A new method for combining magnesium oxide, MgO, and magnesium dihydrogen phosphate to form an inexpensive compactible ceramic to stabilize very low solubility metal oxides, ashes, swarfs, and other iron or metal-based additives, to create products and waste forms which can be poured or dye cast, and to reinforce and strengthen the ceramics formed by the addition of fibers to the initial ceramic mixture.

Treatment of mercury containing waste

DOEpatents

Kalb, Paul D.; Melamed, Dan; Patel, Bhavesh R; Fuhrmann, Mark

2002-01-01

A process is provided for the treatment of mercury containing waste in a single reaction vessel which includes a) stabilizing the waste with sulfur polymer cement under an inert atmosphere to form a resulting mixture and b) encapsulating the resulting mixture by heating the mixture to form a molten product and casting the molten product as a monolithic final waste form. Additional sulfur polymer cement can be added in the encapsulation step if needed, and a stabilizing additive can be added in the process to improve the leaching properties of the waste form.

Effects of density, cellulose nanofibrils addition ratio, pressing method, and particle size on the bending properties of wet-formed particleboard

Treesearch

Weiqi Leng; John F. Hunt; Mehdi Tajvidi

2017-01-01

Wet-formed particleboard bonded with cellulose nanofibrils (CNF) was prepared in this work. The effects of density, CNF addition ratio, pressing method, and particle size on the bending strength were evaluated. The results showed that density had the most important effect on the modulus of elasticity (MOE), while the CNF addition ratio had the most important effect on...

Additive manufactured serialization

DOEpatents

Bobbitt, III, John T.

2017-04-18

Methods for forming an identifying mark in a structure are described. The method is used in conjunction with an additive manufacturing method and includes the alteration of a process parameter during the manufacturing process. The method can form in a unique identifying mark within or on the surface of a structure that is virtually impossible to be replicated. Methods can provide a high level of confidence that the identifying mark will remain unaltered on the formed structure.

Role of Dispersion Interactions in the Polymorphism and Entropic Stabilization of the Aspirin Crystal

NASA Astrophysics Data System (ADS)

Reilly, Anthony M.; Tkatchenko, Alexandre

2014-08-01

Aspirin has been used and studied for over a century but has only recently been shown to have an additional polymorphic form, known as form II. Since the two observed solid forms of aspirin are degenerate in terms of lattice energy, kinetic effects have been suggested to determine the metastability of the less abundant form II. Here, first-principles calculations provide an alternative explanation based on free-energy differences at room temperature. The explicit consideration of many-body van der Waals interactions in the free energy demonstrates that the stability of the most abundant form of aspirin is due to a subtle coupling between collective electronic fluctuations and quantized lattice vibrations. In addition, a systematic analysis of the elastic properties of the two forms of aspirin rules out mechanical instability of form II as making it metastable.

Effect of hardwood process variables on fiberbonding

Treesearch

Otto Suchsland; George E. Woodson; Charles W. Mcmillin

1983-01-01

Severely cooked Masonite gun pulp was used in the laboratory to manufacture these four hardboard types: S1S-wet formed, S2S-wet formed, S1S-dry formed (water added after forming), S2S-dry formed. No resins or other additives were used.

Crystallization of probucol from solution and the glassy state.

PubMed

Kawakami, Kohsaku; Ohba, Chie

2017-01-30

Crystallization of probucol (PBL) from both solution and glassy solid state was investigated. In the crystallization study from solution, six solvents and three methods, i.e., evaporation, addition of a poor solvent, and cooling on ice, were used to obtain various crystal forms. In addition to common two crystal forms (forms I and II), two further forms (forms III and cyclohexane-solvate) were found in this study, and their thermodynamic relationships were determined. Forms I and II are likely to be enantiotropically related with thermodynamic transition temperature below 5°C. Isothermal crystallization studies revealed that PBL glass initially crystallized into form III between 25 and 50°C, and then transformed to form I. The isothermal crystallization appears to be a powerful option to find uncommon crystal forms. The crystallization of PBL was identified to be pressure controlled, thus the physical stability of PBL glass is higher than that of typical compounds. Copyright © 2016 Elsevier B.V. All rights reserved.

49 CFR 191.19 - Report forms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... forms. Copies of the prescribed report forms are available without charge upon request from the address... 49 Transportation 3 2010-10-01 2010-10-01 false Report forms. 191.19 Section 191.19 Transportation... size and kind of paper. In addition, the information required by these forms may be submitted by any...

Porphinogen Formation from the Co-Oligomerization of Formaldehyde and Pyrrole: Free Energy Pathways.

PubMed

Kua, Jeremy; Loli, Helen

2017-10-26

We have investigated the nonoxidative stepwise co-oligomerization of formaldehyde and pyrrole to form porphinogen using density functional theory calculations that include free energy corrections. While the addition of formaldehyde to the pyrrole nitrogen is kinetically favored, thermodynamics suggest that this reaction is reversible in aqueous solution. The more thermodynamically favorable addition of formaldehyde to the ortho-carbon of pyrrole begins a stepwise process, forming dipyrromethane via an azafulvene intermediate. Subsequent additions of formaldehyde and pyrrole lead to bilanes (linear tetrapyrroles), which favorably cyclize to form porphinogen. Porphinogen is a precursor to porphin, the simplest unsubstituted porphyrin that could have played a role in primitive metabolism at the origin of life.

77 FR 65607 - Internal Revenue Service

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-29

... Form 720 returns a systemic way to order additional tax forms and informational publications. Current... forms of information technology; and (e) estimates of capital or start-up costs and costs of operation...

Role of dispersion interactions in the polymorphism and entropic stabilization of the aspirin crystal.

PubMed

Reilly, Anthony M; Tkatchenko, Alexandre

2014-08-01

Aspirin has been used and studied for over a century but has only recently been shown to have an additional polymorphic form, known as form II. Since the two observed solid forms of aspirin are degenerate in terms of lattice energy, kinetic effects have been suggested to determine the metastability of the less abundant form II. Here, first-principles calculations provide an alternative explanation based on free-energy differences at room temperature. The explicit consideration of many-body van der Waals interactions in the free energy demonstrates that the stability of the most abundant form of aspirin is due to a subtle coupling between collective electronic fluctuations and quantized lattice vibrations. In addition, a systematic analysis of the elastic properties of the two forms of aspirin rules out mechanical instability of form II as making it metastable.

Fatty Acid-Based Monomers as Styrene Replacements for Liquid Molding Resins

DTIC Science & Technology

2005-05-01

fatty acid length and unsaturation level on resin and polymer properties. Fig. 2. The addition of fatty acids ( oleic acid ) to glycidyl methacylate to...the synthetic route used to form the methacrylated fatty acids (MFA). The carboxylic acid of fatty acids undergoes a simple addition reaction with... form methacrylated fatty acid monomer

75 FR 62915 - 30-Day Notice of Proposed Information Collection: Form DS-4085, Application for Additional Visa...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

...-4085, Application for Additional Visa Pages or Miscellaneous Passport Services, OMB Control Number 1405... Passport Services. OMB Control Number: 1405-0159. Type of Request: Revision of a Currently Approved Collection. Originating Office: Bureau of Consular Affairs, Passport Services CA/PPT. Form Number: DS-4085...

8 CFR 1299.1 - Use of immigration forms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1299.1 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE NATIONALITY REGULATIONS IMMIGRATION REVIEW FORMS § 1299.1 Use of immigration forms. In addition to forms prepared by the Executive Office for Immigration Review, the Executive Office for Immigration Review...

The cyclic oxidation resistance at 1200 C of beta-NiAl, FeAl, and CoAl alloys with selected third element additions

NASA Technical Reports Server (NTRS)

Barrett, C. A.; Titran, R. H.

1992-01-01

The intermetallic compounds Beta-NiAl, FeAl, and CoAl were tested in cyclic oxidation with selected third element alloy additions. Tests in static air for 200 1-hr cycles at 1200 C indicated by specific weight change/time data and x-ray diffraction analysis that the 5 at percent alloy additions did not significantly improve the oxidation resistance over the alumina forming baseline alloys without the additions. Many of the alloy additions were actually deleterious. Ta and Nb were the only alloy additions that actually altered the nature of the oxide(s) formed and still maintained the oxidation resistance of the protective alumina scale.

Improved the microstructures and properties of M3:2 high-speed steel by spray forming and niobium alloying

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, L.; Hou, L.G., E-mail: lghou@skl.ustb.edu.cn; Zhang, J.X.

The microstructures and properties of spray formed (SF) high-speed steels (HSSs) with or without niobium (Nb) addition were studied. Particular emphasis was placed on the effect of Nb on the solidification microstructures, decomposition of M{sub 2}C carbides, thermal stability and mechanical properties. The results show that spray forming can refine the cell size of eutectic carbides due to the rapid cooling effect during atomization. With Nb addition, further refinement of the eutectic carbides and primary austenite grains are obtained. Moreover, the Nb addition can accelerate the decomposition of M{sub 2}C carbides and increase the thermal stability of high-speed steel, andmore » also can improve the hardness and bending strength with slightly decrease the impact toughness. The high-speed steel made by spray forming and Nb alloying can give a better tool performance compared with powder metallurgy M3:2 and commercial AISI M2 high-speed steels. - Highlights: • Spray forming can effectively refine the microstructure of M3:2 steel. • Niobium accelerates the decomposition of M{sub 2}C carbides. • Niobium increases the hardness and bending strength of spray formed M3:2 steel. • Spray-formed niobium-containing M3:2 steel has the best tool performance.« less

Evaluating evaluation forms form.

PubMed

Smith, Roger P

2004-02-01

To provide a tool for evaluating evaluation forms. A new form has been developed and tested on itself and a sample of evaluation forms obtained from the graduate medical education offices of several local universities. Additional forms from hospital administration were also subjected to analysis. The new form performed well when applied to itself. The form performed equally well when applied to the other (subject) forms, although their scores were embarrassingly poor. A new form for evaluating evaluation forms is needed, useful, and now available.

78 FR 118 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-02

... form number: NA Forms 13022, 13064, 13068. Type of review: Regular. Affected public: Former Federal... nature of the request. The NA Form 13022, Returned Request Form, is used to request additional information about the former Federal employee. The NA Form 13064, Reply to Request Involving Relief Agencies...

76 FR 58086 - Proposed Collections; Comment Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... Treasury is soliciting comments concerning Treasury International Capital (TIC) Form BQ-3, Report of... proposed forms and instructions are available on the Treasury's TIC Forms Web page, http://www.treasury.gov/resource-center/data-chart-center/tic/Pages/forms.aspx . Requests for additional information should be...

76 FR 58083 - Proposed Collections; Comment Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... Treasury is soliciting comments concerning Treasury International Capital (TIC) Form BL-2, Report by... proposed forms and instructions are available on the Treasury's TIC Forms webpage, http://www.treasury.gov/resource-center/data-chart-center/tic/Pages/forms.aspx . Requests for additional information should be...

Van der Waals Interactions in Aspirin

NASA Astrophysics Data System (ADS)

Reilly, Anthony; Tkatchenko, Alexandre

2015-03-01

The ability of molecules to yield multiple solid forms, or polymorphs, has significance for diverse applications ranging from drug design and food chemistry to nonlinear optics and hydrogen storage. In particular, aspirin has been used and studied for over a century, but has only recently been shown to have an additional polymorphic form, known as form II. Since the two observed solid forms of aspirin are degenerate in terms of lattice energy, kinetic effects have been suggested to determine the metastability of the less abundant form II. Here, first-principles calculations provide an alternative explanation based on free-energy differences at room temperature. The explicit consideration of many-body van der Waals interactions in the free energy demonstrates that the stability of the most abundant form of aspirin is due to a subtle coupling between collective electronic fluctuations and quantized lattice vibrations. In addition, a systematic analysis of the elastic properties of the two forms of aspirin rules out mechanical instability of form II as making it metastable.

Reversible 1,2-Addition of Water To Form a Nucleophilic Mn(I) Hydroxide Complex: A Thermodynamic and Reactivity Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tondreau, Aaron M.; Michalczyk, Ryszard; Boncella, James M.

( iPrPN HP)Mn(CO) 2(OH) (2; iPrPN HP = HN{CH 2CH 2(P iPr 2)} 2) was formed from the reversible 1,2-addition of water to ( iPrPNP)Mn(CO) 2 (1; iPrPNP = the deprotonated, amide form of the ligand, –N{CH 2CH 2(P iPr 2)} 2). This reversible reaction was probed via variable-temperature NMR experiments, and the energetics of the 1,2-addition/elimination was found to be slightly exothermic (-0.8 kcal/mol). The corresponding manganese hydroxide was found to react with aldehydes, yielding the corresponding manganese carboxylate complexes ( iPrPN HP)Mn(CO) 2(CO 2R), where R = H, methyl, phenyl. While no reaction between 1 and neat benzaldehydemore » was observed, in the presence of water, conversion to the corresponding manganese-bound benzoate with formation of H 2 was observed. The catalytic oxidation of benzaldehyde by water without additives was unsuccessful due to strong product inhibition, with the manganese benzoate formed under a variety of reaction conditions. Upon addition of base, a catalytic cycle for the conversion of aldehyde to carboxylate and hydrogen can be devised.« less

Reversible 1,2-Addition of Water To Form a Nucleophilic Mn(I) Hydroxide Complex: A Thermodynamic and Reactivity Study

DOE PAGES

Tondreau, Aaron M.; Michalczyk, Ryszard; Boncella, James M.

2017-09-20

( iPrPN HP)Mn(CO) 2(OH) (2; iPrPN HP = HN{CH 2CH 2(P iPr 2)} 2) was formed from the reversible 1,2-addition of water to ( iPrPNP)Mn(CO) 2 (1; iPrPNP = the deprotonated, amide form of the ligand, –N{CH 2CH 2(P iPr 2)} 2). This reversible reaction was probed via variable-temperature NMR experiments, and the energetics of the 1,2-addition/elimination was found to be slightly exothermic (-0.8 kcal/mol). The corresponding manganese hydroxide was found to react with aldehydes, yielding the corresponding manganese carboxylate complexes ( iPrPN HP)Mn(CO) 2(CO 2R), where R = H, methyl, phenyl. While no reaction between 1 and neat benzaldehydemore » was observed, in the presence of water, conversion to the corresponding manganese-bound benzoate with formation of H 2 was observed. The catalytic oxidation of benzaldehyde by water without additives was unsuccessful due to strong product inhibition, with the manganese benzoate formed under a variety of reaction conditions. Upon addition of base, a catalytic cycle for the conversion of aldehyde to carboxylate and hydrogen can be devised.« less

Synthesis of acid addition salt of delta-aminolevulinic acid from 5-bromo levulinic acid esters

DOEpatents

Moens, Luc

2003-06-24

A process of preparing an acid addition salt of delta-aminolevulinc acid comprising: a) dissolving a lower alkyl 5-bromolevulinate and hexamethylenetetramine in a solvent selected from the group consisting of water, ethyl acetate, chloroform, acetone, ethanol, tetrahydrofuran and acetonitrile, to form a quaternary ammonium salt of the lower alkyl 5-bromolevulinate; and b) hydrolyzing the quaternary ammonium salt with an inorganic acid to form an acid addition salt of delta-aminolevulinic acid.

The GC-MS Observation of Intermediates in a Stepwise Grignard Addition Reaction

ERIC Educational Resources Information Center

Latimer, Devin

2007-01-01

Preparation of phenylmagnesium bromide described by Eckert, addition of three equivalents of Grignard reagent to diethyl carbonate to form triphenylmethanol and a series of GC-MS procedures that form intermediates. The analysis is consistent with a gas chromatogram and mass spectrum for each of the expected intermediates and final product of the…

Low-molecular-weight model study of peroxide cross-linking of ethylene-propylene-diene rubber using gas chromatography and mass spectrometry II. Addition and combination reactions.

PubMed

Peters, R; van Duin, M; Tonoli, D; Kwakkenbos, G; Mengerink, Y; van Benthem, R A T M; de Koster, C G; Schoenmakers, P J; van der Wal, Sj

2008-08-08

The dicumyl-peroxide-initiated addition and combination reactions of mixtures of alkanes (n-octane, n-decane) and alkenes [5,6-dihydrodicyclopentadiene (DCPDH), 5-ethylidene-2-norbornane (ENBH) and 5-vinylidene-2-norbornane (VNBH)] were studied to mimic the peroxide cross-linking reactions of terpolymerised ethylene, propylene and a diene monomer (EPDM). The reaction products of the mixtures were separated by both gas chromatography (GC) and comprehensive two-dimensional gas chromatography (GCxGC). The separated compounds were identified from their mass spectra and their GC and GCxGC elution pattern. Quantification of the various alkyl/alkyl, alkyl/allyl and allyl/allyl combination products shows that allylic-radicals comprise approximately 60% of the substrate radicals formed. The total concentration of the products formed by combination is found to be independent of the concentration and the type of alkene. The total concentration of the products formed by addition to the alkene increases with increasing concentration of alkene. In addition, the total concentration of the formed addition products depends strongly on the type of the alkene used, viz. VNBH>ENBH approximately DCPDH, which is a consequence of differences in steric hindrance of the unsaturation. The peroxide curing efficiency, defined as the number of moles of cross-linked products formed per mol of peroxide, is 173% using 9% (w/w) 5-vinylidene-2-norbornane (VNBH). This indicates that the addition reaction is recurrent. All these findings are consistent with experimental studies on peroxide curing of EPDM rubber. In addition, the present results provide more-detailed structural information, increasing the understanding of the mechanism of peroxide curing of EPDM. The described approach to use low-molecular-weight model compounds followed by GC-mass spectrometry (MS) and GCxGC-MS analysis is proven to be a very powerful tool to study the cross-linking of EPDM.

Shifts in priming partly explain impacts of long-term nitrogen input in different chemical forms on soil organic carbon storage.

PubMed

Song, Minghua; Guo, Yu; Yu, Feihai; Zhang, Xianzhou; Cao, Guangmin; Cornelissen, Johannes H C

2018-05-10

Input of labile organic carbon can enhance decomposition of extant soil organic carbon (SOC) through priming. We hypothesized that long-term nitrogen (N) input in different chemical forms alters SOC pools by altering priming effects associated with N-mediated changes in plants and soil microbes. The hypothesis was tested by integrating field experimental data of plants, soil microbes and two incubation experiments with soils that had experienced 10 years of N enrichment with three chemical forms (ammonium, nitrate and both ammonium and nitrate) in an alpine meadow on the Tibetan Plateau. Incubations with glucose- 13 C addition at three rates were used to quantify effects of exogenous organic carbon input on the priming of SOC. Incubations with microbial inocula extracted from soils that had experienced different long-term N treatments were conducted to detect effects of N-mediated changes in soil microbes on priming effects. We found strong evidence and a mechanistic explanation for alteration of SOC pools following 10 years of N enrichment with different chemical forms. We detected significant negative priming effects both in soils collected from ammonium-addition plots and in sterilized soils inoculated with soil microbes extracted from ammonium-addition plots. In contrast, significant positive priming effects were found both in soils collected from nitrate-addition plots and in sterilized soils inoculated with soil microbes extracted from nitrate-addition plots. Meanwhile, the abundance and richness of graminoids were higher and the abundance of soil microbes was lower in ammonium-addition than in nitrate-addition plots. Our findings provide evidence that shifts toward higher graminoid abundance and changes in soil microbial abundance mediated by N chemical forms are key drivers for priming effects and SOC pool changes, thereby linking human interference with the N cycle to climate change. © 2018 John Wiley & Sons Ltd.

76 FR 9330 - Notice of Proposed Information Collection Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

... Number: 1820-0528. Agency Form Number(s): Form RSA-227. Frequency of Responses: Annually. Affected Public... Estimated Number of Annual Burden Hours: 896. Abstract: Form RSA-227 is used to meet specific data.... In addition, Form RSA-227 will be used to analyze and evaluate the effectiveness of individual Client...

20 CFR 656.30 - Validity of and invalidation of labor certifications.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (Form ETA 750) or the Application for Permanent Employment Certification (Form ETA 9089) and only for... Employment Certification (Form ETA 750) or the Application for Permanent Employment Certification (Form ETA... by ETA using the procedures described in § 656.32. Additionally, after issuance, a labor...

Magnesium-based methods, systems, and devices

DOEpatents

Zhao, Yufeng; Ban, Chunmei; Ruddy, Daniel; Parilla, Philip A.; Son, Seoung-Bum

2017-12-12

An aspect of the present invention is an electrical device, where the device includes a current collector and a porous active layer electrically connected to the current collector to form an electrode. The porous active layer includes MgB.sub.x particles, where x.gtoreq.1, mixed with a conductive additive and a binder additive to form empty interstitial spaces between the MgB.sub.x particles, the conductive additive, and the binder additive. The MgB.sub.x particles include a plurality of boron sheets of boron atoms covalently bound together, with a plurality of magnesium atoms reversibly intercalated between the boron sheets and ionically bound to the boron atoms.

Tris(trimethylsilyl) Phosphite as an Efficient Electrolyte Additive To Improve the Surface Stability of Graphite Anodes.

PubMed

Yim, Taeeun; Han, Young-Kyu

2017-09-27

Tris(trimethylsilyl) phosphite (TMSP) has received considerable attention as a functional additive for various cathode materials in lithium-ion batteries, but the effect of TMSP on the surface stability of a graphite anode has not been studied. Herein, we demonstrate that TMSP serves as an effective solid electrolyte interphase (SEI)-forming additive for graphite anodes in lithium-ion batteries (LIBs). TMSP forms SEI layers by chemical reactions between TMSP and a reductively decomposed ethylene carbonate (EC) anion, which is strikingly different from the widely known mechanism of the SEI-forming additives. TMSP is stable under cathodic polarization, but it reacts chemically with radical anion intermediates derived from the electrochemical reduction of the carbonate solvents to generate a stable SEI layer. These TMSP-derived SEI layers improve the interfacial stability of the graphite anode, resulting in a retention of 96.8% and a high Coulombic efficiency of 95.2%. We suggest the use of TMSP as a functional additive that effectively stabilizes solid electrolyte interfaces of both the anode and cathode in lithium-ion batteries.

Adults' understanding of inversion concepts: how does performance on addition and subtraction inversion problems compare to performance on multiplication and division inversion problems?

PubMed

Robinson, Katherine M; Ninowski, Jerilyn E

2003-12-01

Problems of the form a + b - b have been used to assess conceptual understanding of the relationship between addition and subtraction. No study has investigated the same relationship between multiplication and division on problems of the form d x e / e. In both types of inversion problems, no calculation is required if the inverse relationship between the operations is understood. Adult participants solved addition/subtraction and multiplication/division inversion (e.g., 9 x 22 / 22) and standard (e.g., 2 + 27 - 28) problems. Participants started to use the inversion strategy earlier and more frequently on addition/subtraction problems. Participants took longer to solve both types of multiplication/division problems. Overall, conceptual understanding of the relationship between multiplication and division was not as strong as that between addition and subtraction. One explanation for this difference in performance is that the operation of division is more weakly represented and understood than the other operations and that this weakness affects performance on problems of the form d x e / e.

Synthesis of an acid addition salt of delta-aminolevulinic acid from 5-bromo levulinic acid esters

DOEpatents

Moens, L.

1999-05-25

A process is disclosed for preparing an acid addition salt of delta-aminolevulinic acid comprising. The process involves dissolving a lower alkyl 5-bromolevulinate and an alkali metal diformylamide in an organic solvent selected from the group consisting of acetonitrile, methanol, tetrahydrofuran, 2-methyltetrahydrofuran and methylformate or mixtures to form a suspension of an alkyl 5-(N,N-diformylamino) levulinate ester; and hydrolyzing the alkyl 5-(N,N-diformylamino) levulinate with an inorganic acid to form an acid addition salt of delta-amino levulinic acid.

Synthesis of an acid addition salt of delta-aminolevulinic acid from 5-bromo levulinic acid esters

DOEpatents

Moens, Luc

1999-01-01

A process of preparing an acid addition salt of delta-aminolevulinic acid comprising: dissolving a lower alkyl 5-bromolevulinate and an alkali metal diformylamide in an organic solvent selected from the group consisting of acetonitrile, methanol, tetrahydrofuran, 2-methyltetrahydrofuran and methylformate or mixtures thereof to form a suspension of an alkyl 5-(N,N-diformylamino) levulinate ester; and hydrolyzing said alkyl 5-(N,N-diformylamino) levulinate with an inorganic acid to form an acid addition salt of delta-amino levulinic acid.

Recovery of nitrogen from saponification wastewater by struvite precipitation.

PubMed

Huang, Haiming; Xiao, Xianming; Yang, Liping; Yan, Bo

2010-01-01

In general, saponification wastewater produced from the separation process of rare-earth elements contains high ammonium concentration. In this study, a series of experiments were conducted to investigate the parameters to enhance the struvite precipitation potential for ammonium removal from the wastewater having an ammonium concentration of 4,100 mg/L. Experimental results showed that increasing the dose and grain size of pre-formed struvite, which was added as the seeding material in struvite reaction, could increase ammonium removal. The removal efficiency increased 7.6% when the dose of pre-formed struvite with crystal grain size range of 0.098-0.150 mm increased from 0 g/L to 60 g/L. Additionally, struvite precipitation was tested with the intermittent addition of magnesium and phosphate to utilize the struvite crystals formed during the reaction process as the seeding material for the subsequent reaction. The results revealed that intermittently adding magnesium 7 times effectively enhanced ammonium removal by around 8%, which was equivalent to that of using pre-formed struvite as the seeding material. Furthermore, the chemical composition of the struvite recovered with intermittent addition of magnesium was characterized, showing the struvite could be used as fertilizer. An economic evaluation indicated that intermittent addition of magnesium 7 times can save 13.4% cost for recovering per kg NH(4)(+) compared to that of bulk addition.

Plant Uptake of Per- and Polyfluoroalkyl Substances at a Contaminated Fire Training Facility to Evaluate the Phytoremediation Potential of Various Plant Species.

PubMed

Gobelius, Laura; Lewis, Jeffrey; Ahrens, Lutz

2017-11-07

Fire training facilities and other areas suffer from serious per- and polyfluoroalkyl substance (PFAS) contamination in soil, surface water, and groundwater due to regular practices with PFAS-containing aqueous firefighting foams (AFFFs). Therefore, the uptake of 26 PFASs in plants and the contamination of soil and groundwater has been investigated at a fire training site at Stockholm Arlanda airport, Stockholm (Sweden) in 2016. Elevated ∑ 26 PFAS levels were detected in soil and groundwater ranging from 16 to 160 ng g -1 dry weight (dw) and 1200-34 000 ng L -1 , respectively. Samples from different plant species and tissues (i.e., roots, trunk/cores, twigs, leaves/needles) of the local plant community were taken, namely silver birch (Betula pendula), Norway spruce (Picea abies), bird cherry (Prunus padus), mountain ash (Sorbus aucuparia), ground elder (Aegopodium podagraria), long beechfern (Phegopteris connectilis), and wild strawberry (Fragaria vesca). The plants showed a high variability of concentrations with highest ∑ 26 PFAS concentrations in vegetative compartments with up to 97 ng g -1 wet weight (ww) and 94 ng g -1 ww in birch leaves and spruce needles, respectively. Annual ground cover plants such as long beechfern and ground elder, and bushes like bird cherry showed concentrations up to 6.9, 23, and 21 ng g -1 ww, respectively. The bioconcentration factors (BCFs; plant/soil ratios) were highest in foliage, while the total tree burden of ∑ 26 PFASs per tree was up to 11 mg for birch and 1.8 mg for spruce. Considering a shelterwood system with mixed stands of silver birch and spruce in combination with regular harvest of leaves and birch sap and an understory of ground elder, it is potentially feasible to remove 1.4 g of ∑ 26 PFASs per year and hectare from (heavily) contaminated sites. An alternative approach is the coppicing of birch trees in combination with an understory of ground elder, potentially removing 0.65 g yr -1 ha -1 of ∑ 26 PFASs, while a simple meadow with ground elder can remove 0.55 g yr -1 ha -1 ∑ 26 PFASs.

Trace metal contents in wild edible mushrooms growing on serpentine and volcanic soils on the island of Lesvos, Greece.

PubMed

Aloupi, M; Koutrotsios, G; Koulousaris, M; Kalogeropoulos, N

2012-04-01

The objectives of this survey were (1) to assess for the first time the Cd, Cu, Cr, Fe, Mn, Ni, Pb and Zn contents in wild edible mushrooms (Russula delica, Lactarius sanguifluus, Lactarius semisanguifluus, Lactarius deliciosus, Suillus bellinii) from the island of Lesvos, (2) to investigate the metals' variability among the species, as well as in relation to the chemical composition of the underlying soil, comparing mushrooms collected from volcanic and serpentine substrates and (3) to estimate metal intake by the consumption of the mushrooms under consideration. The trace metals in 139 samples were determined by flame or flameless atomic absorption spectroscopy. The median metal concentrations were as follows: Cd: 0.14; Cr: 0.10; Cu: 8.51; Fe: 30.3; Mn: 5.26; Ni: 0.34; Pb: 0.093 and Zn: 64.50, all in mgkg(-1) dry weight. The observed concentrations are among the lowest reported for mushrooms from Europe or Turkey, while Pb and Cd values did not exceed the limits set by the European Union. Significant species- and substrate-related differences in the metal contents were found, but the variability did not follow a uniform pattern for all the metals in all mushroom species. As a general trend, the mushrooms growing in serpentine sites contained higher Cd, Cr and Ni than those from volcanic sites. The calculated bioconcentration factors (BCFs) showed that none of the mushrooms can be regarded as a metal bioaccumulator, although BCF values slightly above unity were found for Zn in the three Lactarius species, and for Cu in R. delica. The studied mushrooms could supply considerable amounts of essential metals such as Zn and Cr. On the other hand, the consumption of R. delica collected from volcanic soils could provide 12% of the Cd daily tolerable intake and as high as 53% when collected from serpentine soils. Nonetheless, our results indicate that the regular consumption of wild edible mushrooms from Lesvos is quite safe for human health. Copyright © 2011 Elsevier Inc. All rights reserved.

Ecosystem services trade-offs and determinants in China's Yangtze River Economic Belt from 2000 to 2015.

PubMed

Xu, Xibao; Yang, Guishan; Tan, Yan; Liu, Jingping; Hu, Huizhi

2018-09-01

Ecosystem services (ES) play an important role in sustaining ecological security, sustainable development and human well-being. This study investigates spatio-temporal changes in five key ES in the Yangtze River Economic Belt of China in 2000-2015-water conservation (WC), soil retention (SR), carbon sequestration (CS), biodiversity conservation (BC) and food supply (FS), by applying three ecological models (InVEST, RUSLE, CASA). Employing scenario simulations, the study quantifies distinct effects of significant factors on ES changes. Using spatial overlapping and Spearman's rank correlation respectively, the study distinguishes spatial patterns of synergies and trade-offs between five ES at the grid and city-scales. The results show that CS, FS, WC and SR presented an overall upward trend, increasing by 22.7%, 16.9%, 6.4% and 4.7%, respectively, while BC remained steady with a marginal degradation. Change in these five ES exhibited dramatic spatial heterogeneity. Across 131 cities, 98.5% of which increased in CS, 87.7% in WC, 68.5% in FS, and 53.1% in SR, while more than half experienced slight degradation in BC. There is high heterogeneity and a great diversity among spatial distributions of ES synergies and trade-offs, which is largely dependent on ES pairs and spatial patterns of land use. Land use/land cover change was the dominant force driving changes in SR, BC and CS, while meteorological factors exhibited a greater effect on WS change than land use/land cover change. The paper examines the synergies between WC-SR, CS-BC and BC-FS on the city level, while WC-BC exhibits significant trade-offs, and no significant relationships for other ES pairs. It is imperative that ES trade-offs at different scales are incorporated to strengthen ecological protection and management policies in project implementation, maintaining ES within vital regions in China. More sophisticated methods and more ES indicators need to be incorporated to enhance the robustness and completeness of assessment. Copyright © 2018 Elsevier B.V. All rights reserved.

77 FR 41981 - Agency Information Collection Activities: Final Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-17

... review and comments request. Form Title: EIB 99-14 Export-Import Bank Trade Reference form. SUMMARY: The... Reference form provides essential credit information used by Ex-Im Bank credit officers when analyzing... (longer than 360 days), for the export of their U.S. goods and services. Additionally, this form is an...

7 CFR 3430.12 - Requests for applications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicable. (13) Directions for obtaining additional requests for applications and application forms. (14) Information about how to obtain application forms and the instructions for completing such forms. (15... of the application evaluation Process. (17) Specific evaluation criteria used in the review Process...

A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

DOE PAGES

Xue, Jiawei; Zhang, Anfeng; Li, Yao; ...

2015-10-08

Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused bymore » a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. In conclusion, the observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.« less

A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy.

PubMed

Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

2015-10-08

Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. The observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.

A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

PubMed Central

Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

2015-01-01

Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. The observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys. PMID:26446425

Incorporating additional tree and environmental variables in a lodgepole pine stem profile model

Treesearch

John C. Byrne

1993-01-01

A new variable-form segmented stem profile model is developed for lodgepole pine (Pinus contorta) trees from the northern Rocky Mountains of the United States. I improved estimates of stem diameter by predicting two of the model coefficients with linear equations using a measure of tree form, defined as a ratio of dbh and total height. Additional improvements were...

10. VIEW OF THE ADDITION TO BUILDING 883, REFERRED TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. VIEW OF THE ADDITION TO BUILDING 883, REFERRED TO AS SIDE C. ARMOR PLATE MADE WITH DEPLETED URANIUM WAS HEATED IN A MOLTEN SALT BATH, THEN PROCESSED THROUGH THE ROLLING MILL TO FORM LARGE SHEETS. (9/16/85) - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

Microdetermination of Sucrose in Plasma with the Anthrone Reagent.

DTIC Science & Technology

1979-11-01

polysaccharides . The initial attempts to use it for selective determinations of monosaccharides in a mixture, however, were frustrated by a mutual...disaccharides and polysaccharides are hydrolyzed to form monosaccharides . In addition, water is split off from the latter to form hydroxaldehyde...supernate were then concentrated to dryness at 80 C with a manifold evaporator after which endogenous monosaccharides were destroyed by the addition of

Diastereoselective Synthesis of Seven-Membered Ring trans-Alkenes from Dienes and Aldehydes by Silylene Transfer

PubMed Central

Greene, Margaret A.; Prévost, Michel; Tolopilo, Joshua; Woerpel, K. A.

2012-01-01

Silver-catalyzed silylene transfer to alkenes formed vinylsilacyclopropanes regioselectively. These allylic silanes underwent additions to aldehydes to form seven-membered ring trans-alkenes with high diastereoselectivity. The high reactivity of the trans alkenes is evidenced by their formal [1,3]-sigmatropic rearrangement reactions and their rapid additions of oxygen–hydrogen bonds across the carbon–carbon double bonds. PMID:22780578

H-atom addition and abstraction reactions in mixed CO, H2CO and CH3OH ices - an extended view on complex organic molecule formation

NASA Astrophysics Data System (ADS)

Chuang, K.-J.; Fedoseev, G.; Ioppolo, S.; van Dishoeck, E. F.; Linnartz, H.

2016-01-01

Complex organic molecules (COMs) have been observed not only in the hot cores surrounding low- and high-mass protostars, but also in cold dark clouds. Therefore, it is interesting to understand how such species can be formed without the presence of embedded energy sources. We present new laboratory experiments on the low-temperature solid state formation of three complex molecules - methyl formate (HC(O)OCH3), glycolaldehyde (HC(O)CH2OH) and ethylene glycol (H2C(OH)CH2OH) - through recombination of free radicals formed via H-atom addition and abstraction reactions at different stages in the CO→H2CO→CH3OH hydrogenation network at 15 K. The experiments extend previous CO hydrogenation studies and aim at resembling the physical-chemical conditions typical of the CO freeze-out stage in dark molecular clouds, when H2CO and CH3OH form by recombination of accreting CO molecules and H-atoms on ice grains. We confirm that H2CO, once formed through CO hydrogenation, not only yields CH3OH through ongoing H-atom addition reactions, but is also subject to H-atom-induced abstraction reactions, yielding CO again. In a similar way, H2CO is also formed in abstraction reactions involving CH3OH. The dominant methanol H-atom abstraction product is expected to be CH2OH, while H-atom additions to H2CO should at least partially proceed through CH3O intermediate radicals. The occurrence of H-atom abstraction reactions in ice mantles leads to more reactive intermediates (HCO, CH3O and CH2OH) than previously thought, when assuming sequential H-atom addition reactions only. This enhances the probability to form COMs through radical-radical recombination without the need of UV photolysis or cosmic rays as external triggers.

On the fresh-water invertebrates of the North American Jurassic

USGS Publications Warehouse

White, Charles A.

1886-01-01

Important additions having lately been made to our knowledge of the fresh-water invertebrates of the North American Jurassic strata, I have thought it desirable to present not only descriptions and figures of the new forms in this bulletin, but to make the publication an illustrated synopsis of all the forms yet discovered. I therefore reproduce on the accompanying plates figures of all the species hitherto published, in addition to those of the new forms. Besides this, I offer the following general discussion of the subject of those fresh-water fossils and theft bearing upon continental history.

Studies on stability of PEC cells formed with CdS:Al films

NASA Astrophysics Data System (ADS)

Lokhande, C. D.; Pawar, S. H.

1984-02-01

Aluminum doped and undoped CdS films are deposited on stainless steel substrates by chemical bath deposition technique and are employed in PEC cells. The effects of heat treatment to photoanode and addition of salts like KCl and NaCl in an electrolyte on the stability of the PEC cells are studied. It is found that though the PEC cells formed with CdS films are stable in NaOH-Na 2S-S electrolyte, the stability of PEC cells formed with Al doped CdS films is achieved only after the addition of saturated salts in the electrolyte.

75 FR 72847 - Agency Forms Submitted for OMB Review, Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

..., Placement Service. The RRB currently utilizes four forms to obtain information needed to carry out its job... required to obtain or maintain a benefit. In addition, the RRB also collects Railroad Job Vacancies... Control Number: 3220-0057. Form(s) submitted: ES-2, ES-21, ES-21c, UI-35, and Job Vacancies Reports. Type...

76 FR 79609 - Federal Acquisition Regulation; Clarification of Standards for Computer Generation of Forms

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

... Regulation; Clarification of Standards for Computer Generation of Forms AGENCY: Department of Defense (DoD... American National Standards Institute X12, as the valid standard to use for computer-generated forms. FAR... optional forms on their computers. In addition to clarifying that FIPS 161 is no longer in use, public...

[Effects on phenol removal in the process of enhanced coagulation by manganese dioxide formed in situ].

PubMed

Zhang, Li-Zhu; Chen, Xiao-Dong; Ma, Jun; Yu, Min; Li, Xin

2011-10-01

Phenol was selected as a model compound. Factors, such as Ca2+, tannic acid, dose of kaolinite, dose of manganese dioxide formed in situ and pH, were invested on phenol removal in the process of enhanced coagulation by manganese dioxide formed in situ. Results showed that the addition of Ca2+ is beneficial for phenol removal. In the range of Ca2+ varied from 0 to 1.0 mmol x L(-1), the efficiency of phenol removal was enhanced more than 10%. Tannic acid can enhance phenol removal significantly when they are coexisted in water. As tannic acid was added to 10 mg x L(-1), phenol removal can be increased about 30% and 50% in the process of coagulation by AlCl3 and enhanced coagulation by manganese dioxide formed in situ, respectively. The dose of coagulant can be reduced in the process of enhanced coagulation with the addition of manganese dioxide formed in situ. The point of 1 mg x L(-1) manganese dioxide formed in situ linked with 30 mg x L(-1) AlCl3 can have the same phenol removal efficiency as the addition of 50 mg x L(-1) AlCl3. In the range of pH varied from 5 to 9, phenol can be removed with the high efficiency in the process of enhanced coagulation by manganese dioxide formed in situ. While under the strong acid condition and strong basic condition, phenol has lower removal efficiency.

Effects of some polymeric additives on the cocrystallization of caffeine

NASA Astrophysics Data System (ADS)

Chung, Jihae; Kim, Il Won

2011-11-01

Effects of polymeric additives on the model cocrystallization were examined. The model cocrystal was made from caffeine and oxalic acid, and poly(ethylene glycol) (PEG), poly( L-lactide) (PLLA), poly(ɛ-caprolactone) (PCL), and poly(acrylic acid) (PAA) were the additives. The cocrystals were formed as millimeter-sized crystals without additives, and they became microcrystals with PLLA and PCL, and nanocrystals with PAA. XRD and IR revealed that the cocrystal structure was unchanged despite the strong effects of the additives on the crystal morphology, although some decrease in crystallinity was observed with PAA as confirmed by DSC. The DSC study also showed that the cocrystal melted and recrystallized to form α-caffeine upon heating. The present study verified that the polymeric additives can be utilized to modulate the size and morphology of the cocrystals without interfering the intermolecular interactions essential to the integrity of the cocrystal structures.

77 FR 63924 - Proposed Collection; Comment Request for Form 8633

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-17

... DEPARTMENT OF THE TREASURY Internal Revenue Service Proposed Collection; Comment Request for Form 8633 AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and request for comments. SUMMARY... 20224. FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the form and...

Nonionic diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains: thermotropic and lyotropic liquid crystalline phase behaviour

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sagnella, Sharon M.; Conn, Charlotte E.; Krodkiewska, Irena

2014-09-24

The thermotropic and lyotropic liquid crystalline phase behaviour of a series of diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains (geranoyl, H-farnesoyl, and phytanoyl) has been investigated. When neat, both H-farnesoyl and phytanoyl diethanolamide form a smectic liquid crystalline structure at sub-zero temperatures. In addition, all three diethanolamides exhibit a glass transition temperature at around -73 C. Geranoyl diethanolamide forms a lamellar crystalline phase with a lattice parameter of 17.4 {angstrom} following long term storage accompanied by the loss of the glass transition. In the presence of water, H-farnesoyl and phytanoyl diethanolamide form lyotropic liquid crystalline phases, whilst geranoyl diethanolamide forms anmore » L{sub 2} phase. H-farnesoyl diethanolamide forms a fluid lamellar phase (L{sub {alpha}}) at room temperature and up to {approx} 40 C. Phytanoyl diethanolamide displays a rich mesomorphism forming the inverse diamond (Q{sub II}{sup D}) and gyroid (Q{sub II}{sup G}) bicontinuous cubic phases in addition to an L{sub {alpha}} phase.« less

Proteolysis of truncated hemolysin A yields a stable dimerization interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novak, Walter R. P.; Bhattacharyya, Basudeb; Grilley, Daniel P.

2017-02-21

Wild-type and variant forms of HpmA265 (truncated hemolysin A) fromProteus mirabilisreveal a right-handed, parallel β-helix capped and flanked by segments of antiparallel β-strands. The low-salt crystal structures form a dimeric structureviathe implementation of on-edge main-chain hydrogen bonds donated by residues 243–263 of adjacent monomers. Surprisingly, in the high-salt structures of two variants, Y134A and Q125A-Y134A, a new dimeric interface is formedviamain-chain hydrogen bonds donated by residues 203–215 of adjacent monomers, and a previously unobserved tetramer is formed. In addition, an eight-stranded antiparallel β-sheet is formed from the flap regions of crystallographically related monomers in the high-salt structures. This new interfacemore » is possible owing to additional proteolysis of these variants after Tyr240. The interface formed in the high-salt crystal forms of hemolysin A variants may mimic the on-edge β-strand positioning used in template-assisted hemolytic activity.« less

The Use of Explosive Forming for Fastening and Joining Structural and Pressure Components

NASA Technical Reports Server (NTRS)

Schroeder, J. W.

1985-01-01

Explosive expansion of tubes into tubesheets has been used for over 20 years in the fabrication and repair of shell and tube heat exchangers. The use of explosives to perform these expansions has offered several distinct advantages over other methods. First, the process is fast and economical and can be performed with minimal training of personnel. Secondly, explosive forming does not cause the deleterious metallurgical effects which often result from other forming operations. In addition, the process can be performed remotely without the need for sophisticated handling equipment. The expansion of tubes into tubesheets is only one of many possible fastening and joining applications for which explosive forming can be used to achieve highly successful results. The explosive forming process and where it has been used are described. In addition, some possible adaptations to other joining applications are identified and discussed.

Effect of Ag Addition on the Electrochemical Performance of Cu10Al in Artificial Saliva

PubMed Central

Salgado-Salgado, R. J.; Sotelo-Mazon, O.; Rodriguez-Diaz, R. A.; Salinas-Solano, G.

2016-01-01

In this work we proposed to evaluate the corrosion resistance of four different alloys by electrochemical techniques, a binary alloy Cu10Al, and three ternary alloys Cu10Al-xAg (x = 5, 10, and 15 wt.%) to be used like biomaterials in dental application. Biomaterials proposed were tested in artificial saliva at 37°C for 48 h. In addition, pure metals Cu, Al, Ag, and Ti as reference materials were evaluated. In general the short time tests indicated that the Ag addition increases the corrosion resistance and reduces the extent of localized attack of the binary alloy. Moreover, tests for 48 hours showed that the Ag addition increases the stability of the passive layer, thereby reducing the corrosion rate of the binary alloy. SEM analysis showed that Cu10Al alloy was preferably corroded by grain boundaries, and the Ag addition modified the form of attack of the binary alloy. Cu-rich phases reacted with SCN− anions forming a film of CuSCN, and the Ag-rich phase is prone to react with SCN− anions forming AgSCN. Thus, binary and ternary alloys are susceptible to tarnish in the presence of thiocyanate ions. PMID:27660601

76 FR 56875 - Proposed Collections; Comment Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

... and instructions are available on the Treasury's TIC Forms webpage, http://www.treasury.gov/resource-center/data-chart-center/tic/Pages/forms.aspx . Requests for additional information should be directed to... Number: 1505-0199. Abstract: Form D is part of the Treasury International Capital (TIC) reporting system...

76 FR 58087 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... and instructions are available on the Treasury's TIC Forms Web page, http://www.treasury.gov/resource-center/data-chart-center/tic/Pages/forms.aspx . Requests for additional information should be directed to... Number: 1505-0016. Abstract: Form BQ-1 is part of the Treasury International Capital (TIC) reporting...

78 FR 58608 - Proposed Collection; Comment Request for the EFTPS Primary Contact Information Change Form

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

... EFTPS Primary Contact Information Change Form AGENCY: Internal Revenue Service (IRS), Treasury. ACTION..., the IRS is soliciting comments concerning the EFTPS Primary Contact Information Change Form. DATES... Constitution Avenue NW., Washington, DC 20224. FOR FURTHER INFORMATION CONTACT: Requests for additional...

75 FR 61245 - Proposed Collection; Comment Request for the EFTPS Primary Contact Information Change Form

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... EFTPS Primary Contact Information Change Form AGENCY: Internal Revenue Service (IRS), Treasury. ACTION..., the IRS is soliciting comments concerning the EFTPS Primary Contact Information Change Form. DATES... Constitution Avenue, NW., Washington, DC 20224. FOR FURTHER INFORMATION CONTACT: Requests for additional...

Form reconciles meds, but doctor buy-in difficult.

PubMed

2006-02-01

One ED has developed a medication reconciliation form to meet the National Patient Safety Goal of reconciling medications across the continuum of care. The form does require additional staff time to complete. Staff and physicians need training so they understand the importance of meeting the safety goal. Physicians may resist giving orders on previously prescribed meds and may see the form as redundant.

A capillary zone electrophoresis method to detect conformers and dimers of antithrombin in therapeutic preparations.

PubMed

Marie, Anne-Lise; Tran, Nguyet Thuy; Saller, François; Abdou, Youmna Mohamed; Zeau, Pascal; Plantier, Jean-Luc; Urbain, Rémi; Borgel, Delphine; Taverna, Myriam

2016-07-01

Antithrombin (AT) is a human plasma glycoprotein that possesses anticoagulant and anti-inflammatory properties. However, the native (active) form of AT is unstable and undergoes conformational changes, leading to latent, cleaved, and heterodimeric forms. The presence of these alternative forms mostly inactive can highly impact the quality and therapeutic activity of pharmaceutical AT preparations. We developed a capillary zone electrophoresis method, based on a neutral polyethylene oxide-coated capillary and a buffer close to physiological conditions, enabling the separation of more than eight forms of AT. Several peaks were identified as native, latent, and heterodimeric forms. The CZE method was reproducible with intraday relative standard deviations less than 0.5 and 2% for migration times and peak areas, respectively. The method was applied to the comparison of AT preparations produced by five competitive pharmaceutical companies, and statistical tests were performed. Important differences in the proportion of each form were highlighted. In particular, one AT preparation was shown to contain a high quantity of heterodimer, and two preparations contained high quantities of latent form. In addition, one AT preparation exhibited additional forms, not yet identified. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Influence of La addition on the semi-conductive properties of passive films formed on Cu-Ni alloy

NASA Astrophysics Data System (ADS)

Leng, Xiang; Zhang, Yadong; Zhou, Qiongyu; Zhang, Yinghui; Wang, Zhigang; Wang, Hang; Yang, Bin

2018-05-01

The semi-conductive properties of passive films formed on Cu-Ni alloy and Cu-Ni-La alloy were investigated in 0.1 M NaOH solution, by employing electrochemical impedance spectroscopy (EIS), Mott–Schottky analysis and point defect model (PDM). Results indicate that both the passive films formed on Cu-Ni alloy and Cu-Ni-La alloy display p-type semi-conductive characteristics with cation vacancies in order of magnitude of 1020 cm3. Compared with Cu-Ni alloy, La addition could significantly improve the corrosion resistance, due to a superior barrier passive film formed Cu-Ni-La alloy with a bigger film resistance (R f), increased passive film thickness (L ss) in conjunction with decreased diffusion coefficient (D 0).

Analysis of molecular interactions in solid dosage forms; challenge to molecular pharmaceutics.

PubMed

Yamamoto, Keiji; Limwikrant, Waree; Moribe, Kunikazu

2011-01-01

The molecular states of active pharmaceutical ingredients (APIs) in pharmaceutical dosage forms strongly affect the properties and quality of a drug. Various important fundamental physicochemical studies were reviewed from the standpoint of molecular pharmaceutics. Mechanochemical effects were evaluated in mixtures of APIs and pharmaceutical additives. Amorphization, complex formation and nanoparticle formation are observed after grinding process depending on the combination of APIs and pharmaceutical additives. Sealed-heating method and mesoporous materials have been used to investigate drug molecular interactions in dosage forms. Molecular states have been investigated using powder X-ray diffraction, thermal analysis, IR, solid state fluorometry, and NMR. © 2011 Pharmaceutical Society of Japan

[Mobbing, bullying and other forms of aggression among pupils as a source of stress in school. How far the "victims" are involved?].

PubMed

Seiffge-Krenke, Inge; Welter, Nicole

2008-01-01

Aggression among pupils is one of the frequent sources of stress in school. Aggression among pupils can display diverse forms and also has different origins. In this contribution, bullying, mobbing and relational aggression as different forms of aggression were described, based on recent research. In addition, a psychoanalytic treatment of a female adolescent is presented who suffered from mobbing. The treatment includes 70 hours work with the female patient and additional work with her parents. Based on this case study, it became obvious that it necessary to precisely analyse the own contribution for eliciting and maintaining aggression.

Effect of metallic additives on in situ combustion of Huntington Beach crude experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baena, C.J.; Castanier, L.M.; Brigham, W.E.

1990-08-01

The economics and applicability of an in-situ combustion process for the recovery of crude oil are dictated to a large extent by the nature and the amount of fuel formed during the process. The aim of this work is to use combustion tube studies to determine on a quantitative basis, how the nature and the amount of fuel formed could be changed by the presence of metallic additives. These experiments follow from the qualitative observations on the effect of metallic additives on the in-situ combustion of Huntington Beach crude oil made by De los Rios (1987) at SUPRI. He performedmore » kinetic studies on the oxidation of Huntington Beach crude in porous media and showed that the nature of the fuel formed changed when metallic additives were present. Combustion tube runs were performed using the metallic additives: ferrous chloride (FeCl{sub 2{center dot}}4H{sub 2}O), zinc chloride (ZnCl{sub 2}) and stannic chloride (SnCl{sub 4{center dot}}5H{sub 2}O). Unconsolidated cores were prepared by mixing predetermined amounts of an aqueous solution of the metal salt, Huntington Beach crude oil, Ottawa sand and clay in order to achieve the desired fluid saturations. The mixture was then tamped into the combustion tube. Dry air combustion tube runs were performed keeping the conditions of saturation, air flux and injection pressure approximately the same during each run. The nature of the fuel formed and its impact on the combustion parameters were determined and compared with a control run -- an experiment performed with no metallic additive. 30 refs., 33 figs., 6 tabs.« less

Metalworking and machining fluids

DOEpatents

Erdemir, Ali; Sykora, Frank; Dorbeck, Mark

2010-10-12

Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

Layered Polymeric Optical Systems Using Continuous Coextrusion

DTIC Science & Technology

2009-01-01

coextruded photopatternable films are PMMA (n = 1.490) and a photoreactive additive trans- cinnamic acid (CA, n = 1.555). The multilayered structure...different crystal forms, α, β, and γ. Dimerization of the α- and β- form lead to α-truxinic acid (2) and β-truxillic acid (3). A concentration of 12 wt...index changing additive and a fluorescent dye. (a) Photodimerization of CA into (2) truxinic acid and (3) truxillic acid . (b) Picture of a

Article and method for making an article

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lacy, Benjamin Paul; Schick, David Edward; Kottilingam, Srikanth Chandrudu

An article and a method for making shaped cooling holes in an article are provided. The method includes the steps of providing a metal alloy powder; forming an initial layer with the metal alloy powder, the initial layer having a preselected thickness and a preselected shape, the preselected shape including at least one aperture; sequentially forming an additional layer over the initial layer with the metal alloy powder, the additional layer having a second preselected thickness and a second preselected shape, the second preselected shape including at least one aperture corresponding to the at least one aperture in the initialmore » layer; and joining the additional layer to the initial layer, forming a structure having a predetermined thickness, a predetermined shape, and at least one aperture having a predetermined profile. The structure is attached to a substrate to make the article.« less

Thin-film chip-to-substrate interconnect and methods for making same

DOEpatents

Tuckerman, D.B.

1988-06-06

Integrated circuit chips are electrically connected to a silicon wafer interconnection substrate. Thin film wiring is fabricated down bevelled edges of the chips. A subtractive wire fabrication method uses a series of masks and etching steps to form wires in a metal layer. An additive method direct laser writes or deposits very thin lines which can then be plated up to form wires. A quasi-additive or subtractive/additive method forms a pattern of trenches to expose a metal surface which can nucleate subsequent electrolytic deposition of wires. Low inductance interconnections on a 25 micron pitch (1600 wires on a 1 cm square chip) can be produced. The thin film hybrid interconnect eliminates solder joints or welds, and minimizes the levels of metallization. Advantages include good electrical properties, very high wiring density, excellent backside contact, compactness, and high thermal and mechanical reliability. 6 figs.

SOME PROPERTIES OF HYALIN

PubMed Central

Stephens, R. E.; Kane, R. E.

1970-01-01

The principal protein component of the hyaline layer of sea urchin eggs is the calcium-insoluble protein first described by Kane and Hersh. The protein hyalin is abnormally high in acidic amino acids, almost devoid of basic amino acids, and characteristically rich in valine and proline. Essentially all of the cysteine present is found in the disulfide form; no evidence points to intermolecular disulfide linkages. Hyalin from several species has a minimal subunit weight of about 100,000, though evidence exists for a particle three times this weight in urea or guanidine hydrochloride from one species. Optical rotatory dispersion measurements indicate no α-helix content, though the dispersion has unique characteristic features. Addition of small quantities of calcium causes hyalin to gel to a birefringent fibrous form. The fibrous, birefringent form of hyalin is rendered isotropic upon addition of EDTA, but the birefringence is restored with re-addition of divalent cation. PMID:4190067

Photoinduced charge-transfer materials for nonlinear optical applications

DOEpatents

McBranch, Duncan W.

2006-10-24

A method using polyelectrolyte self-assembly for preparing multi-layered organic molecular materials having individual layers which exhibit ultrafast electron and/or energy transfer in a controlled direction occurring over the entire structure. Using a high molecular weight, water-soluble, anionic form of poly-phenylene vinylene, self-assembled films can be formed which show high photoluminescence quantum efficiency (QE). The highest emission QE is achieved using poly(propylene-imine) (PPI) dendrimers as cationic binders. Self-quenching of the luminescence is observed as the solid polymer film thickness is increased and can be reversed by inserting additional spacer layers of transparent polyelectrolytes between each active conjugated layer, such that the QE grows with thickness. A red shift of the luminescence is also observed as additional PPV layers are added. This effect persists as self-quenching is eliminated. Charge transfer superlattices can be formed by additionally incorporating C.sub.60 acceptor layers.

Thin-film chip-to-substrate interconnect and methods for making same

DOEpatents

Tuckerman, David B.

1991-01-01

Integrated circuit chips are electrically connected to a silica wafer interconnection substrate. Thin film wiring is fabricated down bevelled edges of the chips. A subtractive wire fabrication method uses a series of masks and etching steps to form wires in a metal layer. An additive method direct laser writes or deposits very thin metal lines which can then be plated up to form wires. A quasi-additive or subtractive/additive method forms a pattern of trenches to expose a metal surface which can nucleate subsequent electrolytic deposition of wires. Low inductance interconnections on a 25 micron pitch (1600 wires on a 1 cm square chip) can be produced. The thin film hybrid interconnect eliminates solder joints or welds, and minimizes the levels of metallization. Advantages include good electrical properties, very high wiring density, excellent backside contact, compactness, and high thermal and mechanical reliability.

77 FR 70826 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Uniform...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-27

... for OMB Review; Comment Request; Uniform Billing Form ACTION: Notice. SUMMARY: The Department of Labor... collection request (ICR) revision titled, ``Uniform Billing Form,'' (Form OWCP-04) to the Office of.... In addition, notwithstanding any other provisions of law, no person shall generally be subject to...

78 FR 70102 - Advisory Committee to the Internal Revenue Service; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

...)--additional addresses; Missing TINS for Employer and Insurer Reporting; Minimum Essential Coverage, Premium... (TIN) Matching Program to Improve the Accuracy of Information Reporting; IRC Sec. 6050W and Form 1099-K Reporting; Taxpayer Identification Number (TIN) Truncation; Stripped Tax Credits; Form 1098-T; Form 8300...

15 CFR 782.5 - Where to obtain APR report forms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS GENERAL... forms required by the APR may be downloaded from the Internet at http://www.ap.gov. You also may obtain these forms by contacting: Treaty Compliance Division, Bureau of Industry and Security, U.S. Department...

15 CFR 782.5 - Where to obtain APR report forms.

Code of Federal Regulations, 2013 CFR

2013-01-01

... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS GENERAL... forms required by the APR may be downloaded from the Internet at http://www.ap.gov. You also may obtain these forms by contacting: Treaty Compliance Division, Bureau of Industry and Security, U.S. Department...

15 CFR 782.5 - Where to obtain APR report forms.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS GENERAL... forms required by the APR may be downloaded from the Internet at http://www.ap.gov. You also may obtain these forms by contacting: Treaty Compliance Division, Bureau of Industry and Security, U.S. Department...

15 CFR 782.5 - Where to obtain APR report forms.

Code of Federal Regulations, 2012 CFR

2012-01-01

... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS GENERAL... forms required by the APR may be downloaded from the Internet at http://www.ap.gov. You also may obtain these forms by contacting: Treaty Compliance Division, Bureau of Industry and Security, U.S. Department...

15 CFR 782.5 - Where to obtain APR report forms.

Code of Federal Regulations, 2014 CFR

2014-01-01

... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS GENERAL... forms required by the APR may be downloaded from the Internet at http://www.ap.gov. You also may obtain these forms by contacting: Treaty Compliance Division, Bureau of Industry and Security, U.S. Department...

36 CFR 72.52 - Recovery Action Program grant applications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the appropriate NPS Regional Office. (b) Submission of Applications. In addition to Standard Form 424... following documents and required attachments to NPS Regional Offices: (1) OMB Form 80-RO190, completed as...) Grant agreement form. (3) Narrative statements which will be used in evaluating grant applications in...

36 CFR 72.52 - Recovery Action Program grant applications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the appropriate NPS Regional Office. (b) Submission of Applications. In addition to Standard Form 424... following documents and required attachments to NPS Regional Offices: (1) OMB Form 80-RO190, completed as...) Grant agreement form. (3) Narrative statements which will be used in evaluating grant applications in...

36 CFR 72.52 - Recovery Action Program grant applications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the appropriate NPS Regional Office. (b) Submission of Applications. In addition to Standard Form 424... following documents and required attachments to NPS Regional Offices: (1) OMB Form 80-RO190, completed as...) Grant agreement form. (3) Narrative statements which will be used in evaluating grant applications in...

78 FR 39065 - Proposed Collection; Comment Request for Form 8655

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... tax deposits. This form allows IRS to disclose tax account information and to provide duplicate copies... proposed and/or continuing information collections, as required by the Paperwork Reduction Act of 1995... INFORMATION CONTACT: Requests for additional information or copies of the form and instructions should be...

78 FR 48417 - Proposed Information Collection; Comment Request; Educational Partnership Program (EPP), Ernest F...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... support of the scholarship application by academic professors/advisors. NOAA OEd student scholar alumni... are required to update the student tracker database with the required student information. In addition... System database form, 17 hours; undergraduate application form, 8 hours; reference forms, 1 hour; alumni...

19 CFR 10.38 - Exportation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a... of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495...

19 CFR 10.38 - Exportation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a... of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495...

19 CFR 10.38 - Exportation.

Code of Federal Regulations, 2012 CFR

2012-04-01

... another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a... of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495...

19 CFR 10.38 - Exportation.

Code of Federal Regulations, 2014 CFR

2014-04-01

... another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a... of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495...

M3FT-17OR0301070211 - Preparation of Hot Isostatically Pressed AgZ Waste Form Samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jubin, Robert Thomas; Bruffey, Stephanie H.; Jordan, Jacob A.

The production of radioactive iodine-bearing waste forms that exhibit long-term stability and are suitable for permanent geologic disposal has been the subject of substantial research interest. One potential method of iodine waste form production is hot isostatic pressing (HIP). Recent studies at Oak Ridge National Laboratory (ORNL) have investigated the conversion of iodine-loaded silver mordenite (I-AgZ) directly to a waste form by HIP. ORNL has performed HIP with a variety of sample compositions and pressing conditions. The base mineral has varied among AgZ (in pure and engineered forms), silver-exchanged faujasite, and silverexchanged zeolite A. Two iodine loading methods, occlusion andmore » chemisorption, have been explored. Additionally, the effects of variations in temperature and pressure of the process have been examined, with temperature ranges of 525°C–1,100°C and pressure ranges of 100–300 MPa. All of these samples remain available to collaborators upon request. The sample preparation detailed in this document is an extension of that work. In addition to previously prepared samples, this report documents the preparation of additional samples to support stability testing. These samples include chemisorbed I-AgZ and pure AgI. Following sample preparation, each sample was processed by HIP by American Isostatic Presses Inc. and returned to ORNL for storage. ORNL will store the samples until they are requested by collaborators for durability testing. The sample set reported here will support waste form durability testing across the national laboratories and will provide insight into the effects of varied iodine content on iodine retention by the produced waste form and on potential improvements in waste form durability provided by the zeolite matrix.« less

Electrochemical Corrosion Behavior of Spray-Formed Boron-Modified Supermartensitic Stainless Steel

NASA Astrophysics Data System (ADS)

Zepon, Guilherme; Nogueira, Ricardo P.; Kiminami, Claudio S.; Botta, Walter J.; Bolfarini, Claudemiro

2017-04-01

Spray-formed boron-modified supermartensitic stainless steel (SMSS) grades are alloys developed to withstand severe wear conditions. The addition of boron to the conventional chemical composition of SMSS, combined with the solidification features promoted by the spray forming process, leads to a microstructure composed of low carbon martensitic matrix reinforced by an eutectic network of M2B-type borides, which considerably increases the wear resistance of the stainless steel. Although the presence of borides in the microstructure has a very beneficial effect on the wear properties of the alloy, their effect on the corrosion resistance of the stainless steel was not comprehensively evaluated. The present work presents a study of the effect of boron addition on the corrosion resistance of the spray-formed boron-modified SMSS grades by means of electrochemical techniques. The borides fraction seems to have some influence on the repassivation kinetics of the spray-formed boron-modified SMSS. It was shown that the Cr content of the martensitic matrix is the microstructural feature deciding the corrosion resistance of this sort of alloys. Therefore, if the Cr content in the alloy is increased to around 14 wt pct to compensate for the boron consumed by the borides formation, the corrosion resistance of the alloy is kept at the same level of the alloy without boron addition.

Dropwise additive manufacturing of pharmaceutical products for solvent-based dosage forms.

PubMed

Hirshfield, Laura; Giridhar, Arun; Taylor, Lynne S; Harris, Michael T; Reklaitis, Gintaras V

2014-02-01

In recent years, the US Food and Drug Administration has encouraged pharmaceutical companies to develop more innovative and efficient manufacturing methods with improved online monitoring and control. Mini-manufacturing of medicine is one such method enabling the creation of individualized product forms for each patient. This work presents dropwise additive manufacturing of pharmaceutical products (DAMPP), an automated, controlled mini-manufacturing method that deposits active pharmaceutical ingredients (APIs) directly onto edible substrates using drop-on-demand (DoD) inkjet printing technology. The use of DoD technology allows for precise control over the material properties, drug solid state form, drop size, and drop dynamics and can be beneficial in the creation of high-potency drug forms, combination drugs with multiple APIs or individualized medicine products tailored to a specific patient. In this work, DAMPP was used to create dosage forms from solvent-based formulations consisting of API, polymer, and solvent carrier. The forms were then analyzed to determine the reproducibility of creating an on-target dosage form, the morphology of the API of the final form and the dissolution behavior of the drug over time. DAMPP is found to be a viable alternative to traditional mass-manufacturing methods for solvent-based oral dosage forms. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Synergistic Combination of Unquenching and Plasmonic Fluorescence Enhancement in Fluorogenic Nucleic Acid Hybridization Probes.

PubMed

Vietz, Carolin; Lalkens, Birka; Acuna, Guillermo P; Tinnefeld, Philip

2017-10-11

Fluorogenic nucleic acid hybridization probes are widely used for detecting and quantifying nucleic acids. The achieved sensitivity strongly depends on the contrast between a quenched closed form and an unquenched opened form with liberated fluorescence. So far, this contrast was improved by improving the quenching efficiency of the closed form. In this study, we modularly combine these probes with optical antennas used for plasmonic fluorescence enhancement and study the effect of the nanophotonic structure on the fluorescence of the quenched and the opened form. As quenched fluorescent dyes are usually enhanced more by fluorescence enhancement, a detrimental reduction of the contrast between closed and opened form was anticipated. In contrast, we could achieve a surprising increase of the contrast with full additivity of quenching of the dark form and fluorescence enhancement of the bright form. Using single-molecule experiments, we demonstrate that the additivity of the two mechanisms depends on the perfect quenching in the quenched form, and we delineate the rules for new nucleic acid probes for enhanced contrast and absolute brightness. Fluorogenic hybridization probes optimized not only for quenching but also for the brightness of the open form might find application in nucleic acid assays with PCR avoiding detection schemes.

Determination of initiation of DNA replication before and after nuclear formation in Xenopus egg cell free extracts

PubMed Central

1993-01-01

Xenopus egg extracts prepared before and after egg activation retain M- and S-phase specific activity, respectively. Staurosporine, a potent inhibitor of protein kinase, converted M-phase extracts into interphase- like extracts that were capable of forming nuclei upon the addition of sperm DNA. The nuclei formed in the staurosporine treated M-phase extract were incapable of replicating DNA, and they were unable to initiate replication upon the addition of S-phase extracts. Furthermore, replication was inhibited when the staurosporine-treated M- phase extract was added in excess to the staurosporine-treated S-phase extract before the addition of DNA. The membrane-depleted S-phase extract supported neither nuclear formation nor replication; however, preincubation of sperm DNA with these extracts allowed them to form replication-competent nuclei upon the addition of excess staurosporine- treated M-phase extract. These results demonstrate that positive factors in the S-phase extracts determined the initiation of DNA replication before nuclear formation, although these factors were unable to initiate replication after nuclear formation. PMID:8253833

Radial-rotation profile forming: A new processing technology of incremental sheet metal forming

NASA Astrophysics Data System (ADS)

Laue, Robert; Härtel, Sebastian; Awiszus, Birgit

2018-05-01

Incremental forming processes (i.e., spinning) of sheet metal blanks into cylindrical cups are suitable for lower lot sizes. The produced cups were frequently used as preforms to produce workpieces in further forming steps with additional functions like profiled hollow parts [1]. The incremental forming process radial-rotation profile forming has been developed to enable the production of profiled hollow parts with low sheet thinning and good geometrical accuracy. The two principal forming steps are the production of the preform by rotational swing-folding [2] and the subsequent radial profiling of the hollow part in one clamping position. The rotational swing-folding process is based on a combination of conventional spinning and swing-folding. Therefore, a round blank rotates on a profiled mandrel and due to the swinging of a cylindrical forming tool, the blank is formed to a cup with low sheet thinning. In addition, thickening results at the edge of the blank and wrinkling occurs. However, the wrinkles are formed into the indentation of the profiled mandrel and can be reshaped as an advantage in the second process step, the radial profiling. Due to the rotation and continuous radial feed of a profiled forming tool to the profiled mandrel, the axial profile is formed in the second process step. Because of the minor relative movement in axial direction between tool and blank, low sheet thinning occurs. This is an advantage of the principle of the process.

Project identification for methane reduction options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerr, T.

1996-12-31

This paper discusses efforts directed at reduction in emission of methane to the atmosphere. Methane is a potent greenhouse gas, which on a 20 year timeframe may present a similar problem to carbon dioxide. In addition, methane causes additional problems in the form of smog and its longer atmospheric lifetime. The author discusses strategies for reducing methane emission from several major sources. This includes landfill methane recovery, coalbed methane recovery, livestock methane reduction - in the form of ruminant methane reduction and manure methane recovery. The author presents examples of projects which have implemented these ideas, the economics of themore » projects, and additional gains which come from the projects.« less

FormTracer. A mathematica tracing package using FORM

NASA Astrophysics Data System (ADS)

Cyrol, Anton K.; Mitter, Mario; Strodthoff, Nils

2017-10-01

We present FormTracer, a high-performance, general purpose, easy-to-use Mathematica tracing package which uses FORM. It supports arbitrary space and spinor dimensions as well as an arbitrary number of simple compact Lie groups. While keeping the usability of the Mathematica interface, it relies on the efficiency of FORM. An additional performance gain is achieved by a decomposition algorithm that avoids redundant traces in the product tensors spaces. FormTracer supports a wide range of syntaxes which endows it with a high flexibility. Mathematica notebooks that automatically install the package and guide the user through performing standard traces in space-time, spinor and gauge-group spaces are provided. Program Files doi:http://dx.doi.org/10.17632/7rd29h4p3m.1 Licensing provisions: GPLv3 Programming language: Mathematica and FORM Nature of problem: Efficiently compute traces of large expressions Solution method: The expression to be traced is decomposed into its subspaces by a recursive Mathematica expansion algorithm. The result is subsequently translated to a FORM script that takes the traces. After FORM is executed, the final result is either imported into Mathematica or exported as optimized C/C++/Fortran code. Unusual features: The outstanding features of FormTracer are the simple interface, the capability to efficiently handle an arbitrary number of Lie groups in addition to Dirac and Lorentz tensors, and a customizable input-syntax.

Thiol Reactivity of Curcumin and Its Oxidation Products.

PubMed

Luis, Paula B; Boeglin, William E; Schneider, Claus

2018-04-16

The polypharmacological effects of the turmeric compound curcumin may be partly mediated by covalent adduction to cellular protein. Covalent binding to small molecule and protein thiols is thought to occur through a Michael-type addition at the enone moiety of the heptadienedione chain connecting the two methoxyphenol rings of curcumin. Here we show that curcumin forms the predicted thiol-Michael adducts with three model thiols, glutathione, N-acetylcysteine, and β-mercaptoethanol. More abundant, however, are respective thiol adducts of the dioxygenated spiroepoxide intermediate of curcumin autoxidation. Two electrophilic sites at the quinone-like ring of the spiroepoxide are identified. Addition of β-mercaptoethanol at the 5'-position of the ring gives a 1,7-dihydroxycyclopentadione-5' thioether, and addition at the 1'-position results in cleavage of the aromatic ring from the molecule, forming methoxyphenol-thioether and a tentatively identified cyclopentadione aldehyde. The curcuminoids demethoxy- and bisdemethoxycurcumin do not form all of the possible thioether adducts, corresponding with their increased stability toward autoxidation. RAW264.7 macrophage-like cells activated with phorbol ester form curcumin-glutathionyl and the 1,7-dihydroxycyclopentadione-5'-glutathionyl adducts. These studies indicate that the enone of the parent compound is not the only functional electrophile in curcumin, and that its oxidation products provide additional electrophilic sites. This suggests that protein binding by curcumin may involve oxidative activation into reactive quinone methide and spiroepoxide electrophiles.

Additives In Meat and Poultry Products

MedlinePlus

... Forms Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District ... Inspection Service (FSIS) of the U.S. Department of Agriculture (USDA) shares responsibility with FDA for the safety ...

33 CFR 331.4 - Notification of appealable actions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... appeal. For approved JDs, the notification must include an NAP fact sheet, an RFA form, and a basis of JD... application, an NAP fact sheet and an RFA form. For proffered individual permits, when the initial proffered...), the notification must include an NAP fact sheet and an RFA form. Additionally, an affected party has...

7 CFR Appendix A to Subpart B of... - Review Rating Summary, RUS Form 300

Code of Federal Regulations, 2012 CFR

2012-01-01

...—ENGINEERING 11. System Load Conditions and Losses a. Annual System Loses, ____%—Rating:____ b. Annual Load..., RUS Form 300 Borrower Designation ____ Date Prepared ____ Ratings on form are: 0: Unsatisfactory—no... recommendations 3: Satisfactory—no additional action required at this time N/A: Not applicable PART I—TRANSMISSION...

7 CFR Appendix A to Subpart B of... - Review Rating Summary, RUS Form 300

Code of Federal Regulations, 2013 CFR

2013-01-01

...—ENGINEERING 11. System Load Conditions and Losses a. Annual System Loses, ____%—Rating:____ b. Annual Load..., RUS Form 300 Borrower Designation ____ Date Prepared ____ Ratings on form are: 0: Unsatisfactory—no... recommendations 3: Satisfactory—no additional action required at this time N/A: Not applicable PART I—TRANSMISSION...

7 CFR Appendix A to Subpart B of... - Review Rating Summary, RUS Form 300

Code of Federal Regulations, 2010 CFR

2010-01-01

...—ENGINEERING 11. System Load Conditions and Losses a. Annual System Loses, ____%—Rating:____ b. Annual Load..., RUS Form 300 Borrower Designation ____ Date Prepared ____ Ratings on form are: 0: Unsatisfactory—no... recommendations 3: Satisfactory—no additional action required at this time N/A: Not applicable PART I—TRANSMISSION...

7 CFR Appendix A to Subpart B of... - Review Rating Summary, RUS Form 300

Code of Federal Regulations, 2011 CFR

2011-01-01

...—ENGINEERING 11. System Load Conditions and Losses a. Annual System Loses, ____%—Rating:____ b. Annual Load..., RUS Form 300 Borrower Designation ____ Date Prepared ____ Ratings on form are: 0: Unsatisfactory—no... recommendations 3: Satisfactory—no additional action required at this time N/A: Not applicable PART I—TRANSMISSION...

76 FR 62494 - 30-Day Notice of Proposed Information Collection: DS-157, Supplemental Nonimmigrant Visa Form...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

..., Supplemental Nonimmigrant Visa Form, OMB Control Number 1405-0134 ACTION: Notice of request for public comment...: Supplemental Nonimmigrant Visa Application. OMB Control Number: 1405-0134. Type of Request: Extension of a...). Form Number: DS-157. Respondents: Nonimmigrant visa applicants legally required to provide additional...

75 FR 57318 - Self-Regulatory Organizations; National Securities Clearing Corporation; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-20

... Representative and Qualified Special Representative relationships, NSCC proposes to create an automated, online... data have been required to complete and remit to NSCC specific agreements for each relationship... relationship. For QSR relationships, members submit Forms 9a and Form 9b along with an additional form that is...

76 FR 24854 - Proposed Information Collection; Comment Request; Additional Protocol Report Forms

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... States to submit declaration forms to the International Atomic Energy Agency (IAEA) on a number of... purposes, but also would be necessary elements for a nuclear weapons program. These forms provides the IAEA... and milling of nuclear materials; buildings on sites of facilities selected by the IAEA from the U.S...

Phenylethynyl Containing Reactive Additives

NASA Technical Reports Server (NTRS)

Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

2002-01-01

Phenylethynyl containing reactive additives were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynylphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pyrrolidi none to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

Tetraethyl orthosilicate-based glass composition and method

DOEpatents

Wicks, George G.; Livingston, Ronald R.; Baylor, Lewis C.; Whitaker, Michael J.; O'Rourke, Patrick E.

1997-01-01

A tetraethyl orthosilicate-based, sol-gel glass composition with additives selected for various applications. The composition is made by mixing ethanol, water, and tetraethyl orthosilicate, adjusting the pH into the acid range, and aging the mixture at room temperature. The additives, such as an optical indicator, filler, or catalyst, are then added to the mixture to form the composition which can be applied to a substrate before curing. If the additive is an indicator, the light-absorbing characteristics of which vary upon contact with a particular analyte, the indicator can be applied to a lens, optical fiber, reagant strip, or flow cell for use in chemical analysis. Alternatively, an additive such as alumina particles is blended into the mixture to form a filler composition for patching cracks in metal, glass, or ceramic piping.

Phenylethynyl Containing Reactive Additives

NASA Technical Reports Server (NTRS)

Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

2002-01-01

Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

Identifying the Tautomeric Form of a Deoxyguanosine-Estrogen Quinone Intermediate.

PubMed

Stack, Douglas E

2015-09-10

Mechanistic insights into the reaction of an estrogen o-quinone with deoxyguanosine has been further investigated using high level density functional calculations in addition to the use of 4-hyroxycatecholestrone (4-OHE₁) regioselectivity labeled with deuterium at the C1-position. Calculations using the M06-2X functional with large basis sets indicate the tautomeric form of an estrogen-DNA adduct present when glycosidic bonds cleavage occurs is comprised of an aromatic A ring structure. This tautomeric form was further verified by use of deuterium labelling of the catechol precursor use to form the estrogen o-quinone. Regioselective deuterium labelling at the C1-position of the estrogen A ring allows discrimination between two tautomeric forms of a reaction intermediate either of which could be present during glycosidic bond cleavage. HPLC-MS analysis indicates a reactive intermediate with a m/z of 552.22 consistent with a tautomeric form containing no deuterium. This intermediate is consistent with a reaction mechanism that involves: (1) proton assisted Michael addition; (2) re-aromatization of the estrogen A ring; and (3) glycosidic bond cleavage to form the known estrogen-DNA adduct, 4-OHE₁-1-N7Gua.

Addition products of alpha-tocopherol with lipid-derived free radicals.

PubMed

Yamauchi, Ryo

2007-01-01

The addition products of alpha-tocopherol with lipid-derived free radicals have been reviewed. Free radical scavenging reactions of alpha-tocopherol take place via the alpha-tocopheroxyl radical as an intermediate. If a suitable free radical is present, an addition product can be formed from the coupling of the free radical with the alpha-tocopheroxyl radical. The addition products of alpha-tocopherol with lipid-peroxyl radicals are 8a-(lipid-dioxy)-alpha-tocopherones, which are hydrolyzed to alpha-tocopherylquinone. On the other hand, the carbon-centered radicals of lipids prefer to react with the phenoxyl radical of alpha-tocopherol to form 6-O-lipid-alpha-tocopherol under anaerobic conditions. The addition products of alpha-tocopherol with peroxyl radicals (epoxylinoleoyl-peroxyl radicals) produced from cholesteryl ester and phosphatidylcholine were detected in the peroxidized human plasma using a high-sensitive HPLC procedure with postcolumn reduction and electrochemical detection. Thus, the formation of these addition products provides us with much information on the antioxidant function of vitamin E in biological systems.

Terminal addition in a cellular world.

PubMed

Torday, J S; Miller, William B

2018-07-01

Recent advances in our understanding of evolutionary development permit a reframed appraisal of Terminal Addition as a continuous historical process of cellular-environmental complementarity. Within this frame of reference, evolutionary terminal additions can be identified as environmental induction of episodic adjustments to cell-cell signaling patterns that yield the cellular-molecular pathways that lead to differing developmental forms. Phenotypes derive, thereby, through cellular mutualistic/competitive niche constructions in reciprocating responsiveness to environmental stresses and epigenetic impacts. In such terms, Terminal Addition flows according to a logic of cellular needs confronting environmental challenges over space-time. A reconciliation of evolutionary development and Terminal Addition can be achieved through a combined focus on cell-cell signaling, molecular phylogenies and a broader understanding of epigenetic phenomena among eukaryotic organisms. When understood in this manner, Terminal Addition has an important role in evolutionary development, and chronic disease might be considered as a form of 'reverse evolution' of the self-same processes. Copyright © 2017. Published by Elsevier Ltd.

Signed-negabinary-arithmetic-based optical computing by use of a single liquid-crystal-display panel.

PubMed

Datta, Asit K; Munshi, Soumika

2002-03-10

Based on the negabinary number representation, parallel one-step arithmetic operations (that is, addition and subtraction), logical operations, and matrix-vector multiplication on data have been optically implemented, by use of a two-dimensional spatial-encoding technique. For addition and subtraction, one of the operands in decimal form is converted into the unsigned negabinary form, whereas the other decimal number is represented in the signed negabinary form. The result of operation is obtained in the mixed negabinary form and is converted back into decimal. Matrix-vector multiplication for unsigned negabinary numbers is achieved through the convolution technique. Both of the operands for logical operation are converted to their signed negabinary forms. All operations are implemented by use of a unique optical architecture. The use of a single liquid-crystal-display panel to spatially encode the input data, operational kernels, and decoding masks have simplified the architecture as well as reduced the cost and complexity.

Systems and methods for forming defects on graphitic materials and curing radiation-damaged graphitic materials

DOEpatents

Ryu, Sunmin; Brus, Louis E.; Steigerwald, Michael L.; Liu, Haitao

2012-09-25

Systems and methods are disclosed herein for forming defects on graphitic materials. The methods for forming defects include applying a radiation reactive material on a graphitic material, irradiating the applied radiation reactive material to produce a reactive species, and permitting the reactive species to react with the graphitic material to form defects. Additionally, disclosed are methods for removing defects on graphitic materials.

Simultaneous determination of Fluticasone propionate and Azelastine hydrochloride in the presence of pharmaceutical dosage form additives

NASA Astrophysics Data System (ADS)

Merey, Hanan A.; El-Mosallamy, Sally S.; Hassan, Nagiba Y.; El-Zeany, Badr A.

2016-05-01

Fluticasone propionate (FLU) and Azelastine hydrochloride (AZE) are co-formulated with phenylethyl alcohol (PEA) and Benzalkonium chloride (BENZ) (as preservatives) in pharmaceutical dosage form for treatment of seasonal allergies. Different spectrophotometric methods were used for the simultaneous determination of cited drugs in the dosage form. Direct spectrophotometric method was used for determining of AZE, while Derivative of double divisor of ratio spectra (DD-RS), Ratio subtraction coupled with ratio difference method (RS-RD) and Mean centering of the ratio spectra (MCR) are used for the determination of FLU. The linearity of the proposed methods was investigated in the range of 5.00-40.00 and 5.00-80.00 μg/mL for FLU and AZE, respectively. The specificity of the developed methods was investigated by analyzing laboratory prepared mixtures containing different ratios of cited drugs in addition to PEA and their pharmaceutical dosage form. The validity of the proposed methods was assessed using the standard addition technique. The obtained results were statistically compared with those obtained by official or the reported method for FLU or AZE, respectively showing no significant difference with respect to accuracy and precision at p = 0.05.

Effect of different N fertilizer forms on antioxidant capacity and grain yield of rice growing under Cd stress.

PubMed

Jalloh, Mohamed Alpha; Chen, Jinghong; Zhen, Fanrong; Zhang, Guoping

2009-03-15

Cadmium contamination in soil has become a serious issue in sustainable agriculture production and food safety. A pot experiment was conducted to study the influence of four N fertilizer forms on grain yield, Cd concentration in plant tissues and oxidative stress under two Cd levels (0 and 100 mg Cd kg(-1)soil). The results showed that both N form and Cd stress affected grain yield, with urea-N and NH(4)(+)-N treatments having significantly higher grain yields, and Cd addition reducing yield. NO(3)(-)-N and NH(4)(+)-N treated plants had the highest and lowest Cd concentration in plant tissues, respectively. Urea-N and NH(4)(+)-N treatments had significantly higher N accumulation in plant tissues than other two N treatments. Cd addition caused a significant increase in leaf superoxide dismutase (SOD) and peroxidase (POD) activities for all N treatments, except for NO(3)(-)-N treatment, with urea-N and NH(4)(+)-N treated plants having more increase than organic-N treated ones. The results indicated that growth inhibition, yield reduction and Cd uptake of rice plants in response to Cd addition varied with the N fertilizer form.

On the constrained B-type Kadomtsev-Petviashvili hierarchy: Hirota bilinear equations and Virasoro symmetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, Hsin-Fu; Tu, Ming-Hsien

2011-03-15

We derive the bilinear equations of the constrained BKP hierarchy from the calculus of pseudodifferential operators. The full hierarchy equations can be expressed in Hirota's bilinear form characterized by the functions {rho}, {sigma}, and {tau}. Besides, we also give a modification of the original Orlov-Schulman additional symmetry to preserve the constrained form of the Lax operator for this hierarchy. The vector fields associated with the modified additional symmetry turn out to satisfy a truncated centerless Virasoro algebra.

Syn-anti conformational switching in an ethane-bridged Co(II)bisporphyrin induced by external stimuli: effects of inter-macrocyclic interactions, axial ligation and chemical and electrochemical oxidations.

PubMed

Dey, Soumyajit; Rath, Sankar Prasad

2014-02-07

The syn-anti conformational switching has been demonstrated in the ethane-bridged dicobalt(II)bisporphyrin which is present in the syn-form only. The addition of either perylene or axial ligands to Co(II)(bisporphyrin) completely transforms the syn form into the anti because of strong π-π interaction and axial coordination, respectively. The complex undergoes four 1e-oxidations in CH2Cl2 which are indicative of strong through space interactions between the two cofacial Co-porphyrins at 295 K. The first oxidation is a metal centered one and occurs at a potential much lower than that of the monomeric analog. However, the second oxidation, which is again metal centered, was at a significantly higher potential. The large difference between the first two oxidations, as observed here, is due to much stronger inter-porphyrin interactions. The step-wise oxidations have been performed both chemically and electro-chemically while the progress of the reactions was monitored by UV-visible and (1)H NMR spectroscopy. After 1e-oxidation, a very broad (1)H NMR signal results with increased difference between two meso resonances, which indicates that the two macrocycles are in the syn-form with lesser interplanar separation as also observed by DFT. However, 2e-oxidation results in the stabilization of the anti form. The addition of axial ligands to Co(II)(bisporphyrin) also completely transforms the syn form into the anti form. While additions of THF and I2/I(-) both result in the formation of five-coordinate complexes, Co(II) is oxidized to Co(III) in the case of the latter. However, additions of 1-methylimidazole, pyridine and pyrazine as axial ligands result in the formation of a six-coordinate complex in which Co(II) is spontaneously oxidized to Co(III) in air.

Efficiency of the intermolecular interaction of salicylic acid neutral form and monoanion with Cd2 + ion studied by methods of absorption and fluorescence

NASA Astrophysics Data System (ADS)

Lavrik, N. L.; Mulloev, N. U.

2018-02-01

The methods of absorption and fluorescence were used to study the efficiency of the interaction between salicylic acid derivatives SAD (neutral SA form and SA monoanion) and Cd2 + ions (in CdBr2 salt) within the range pH = 1.5 ÷ 8. The efficiency was determined from the change in both the absorption band contour and the fluorescence intensity of various SAD forms. It has been established that depending on the SAD form, the addition of CdBr2 to a starting solution leads to the formation of additional absorption for both the shorter wave lengths in the absorption spectrum of the neutral form (at pH < 3) and the longer wave lengths in the absorption spectrum for the HSal- monoanion (at pH > 4). In the fluorescence spectra, the intensity was observed to increase for the neutral SAD form (at pH < 3) and to decrease for the HSal- monoanion (at pH > 4) after addition of CdBr2. The spectral changes were interpreted in the framework of common notions about the effect of three physicochemical factors that determine the interaction between the SAD and the Cd2 + ion and affect the parameters of absorption and fluorescence spectra. These factors are: (1) the decrease in pH after addition of CdBr2 to the SAD solution, (2) the decrease in the efficiency of the H-bonding of SAD molecules to the water ones, and (3) the existence of electrostatic ion-ion interaction between the HSal- monoanion and the Cd2 + ion. The bimolecular fluorescence quenching constants Kq of HSal- monoanion fluorescence quenching by the Cd2 + ion appeared to be substantially less than those of the quenching which would follow either the dynamic (diffusion) or the concentration (static) mechanisms.

New Technique of High-Performance Torque Control Developed for Induction Machines

NASA Technical Reports Server (NTRS)

Kenny, Barbara H.

2003-01-01

Two forms of high-performance torque control for motor drives have been described in the literature: field orientation control and direct torque control. Field orientation control has been the method of choice for previous NASA electromechanical actuator research efforts with induction motors. Direct torque control has the potential to offer some advantages over field orientation, including ease of implementation and faster response. However, the most common form of direct torque control is not suitable for the highspeed, low-stator-flux linkage induction machines designed for electromechanical actuators with the presently available sample rates of digital control systems (higher sample rates are required). In addition, this form of direct torque control is not suitable for the addition of a high-frequency carrier signal necessary for the "self-sensing" (sensorless) position estimation technique. This technique enables low- and zero-speed position sensorless operation of the machine. Sensorless operation is desirable to reduce the number of necessary feedback signals and transducers, thus improving the reliability and reducing the mass and volume of the system. This research was directed at developing an alternative form of direct torque control known as a "deadbeat," or inverse model, solution. This form uses pulse-width modulation of the voltage applied to the machine, thus reducing the necessary sample and switching frequency for the high-speed NASA motor. In addition, the structure of the deadbeat form allows the addition of the high-frequency carrier signal so that low- and zero-speed sensorless operation is possible. The new deadbeat solution is based on using the stator and rotor flux as state variables. This choice of state variables leads to a simple graphical representation of the solution as the intersection of a constant torque line with a constant stator flux circle. Previous solutions have been expressed only in complex mathematical terms without a method to clearly visualize the solution. The graphical technique allows a more insightful understanding of the operation of the machine under various conditions.

Validation of the AQT Color-Form Additive Model for Screening and Monitoring Pharmacological Treatment of ADHD

ERIC Educational Resources Information Center

Nielsen, Niels Peter; Wiig, Elisabeth Hemmersam

2013-01-01

Objective:This retrospective study used A Quick Test of Cognitive Speed (AQT) processing-speed and efficiency measures for evaluating sensitivity and monitoring effects during pharmacological treatment of adults with ADHD. Method: Color (C), form (F), and color-form (CF) combination naming were administered to 69 adults during outpatient…

Electricity's "Disappearing Act": Understanding Energy Consumption and Phantom Loads

ERIC Educational Resources Information Center

Rusk, Bryan; Mahfouz, Tarek; Jones, James

2011-01-01

Energy exists in many forms and can be converted from one form to another. However, this conversion is not 100% efficient, and energy is lost in the form of heat during conversion. In addition, approximately 6% of the monthly consumption of the average American household's electricity is neither lost nor used by its residents. These losses are…

Cyclization Reactions through DDQ-Mediated Vinyl Oxazolidinone Oxidation

PubMed Central

Liu, Lei; Floreancig, Paul E.

2009-01-01

Vinyl oxazolidinones react with DDQ to form α,β-unsaturated acyliminium ions in a new method for forming electrophiles under oxidative conditions. Appended nucleophiles undergo 1,4-addition reactions with these intermediates to form cyclic vinyl oxazolidinones with good levels of diastereocontrol, highlighting a new approach to utilizing oxidative carbon–hydrogen bond functionalization to increase molecular complexity. PMID:19552390

77 FR 73369 - Approval and Promulgation of Air Quality Implementation Plans; State of Florida; Regional Haze...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

... for parallel processing and re-submitted in final form as part of the State's September 17, 2012... characters, any form of encryption, and be free of any defects or viruses. For additional information about... the Internet and will be publicly available only in hard copy form. Publicly available docket...

76 FR 66805 - Endangered and Threatened Wildlife and Plants: Final Rulemaking To Designate Critical Habitat for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... which 4,843 were form letters submitted by supporters of the Center for Biological Diversity (CBD) and 20 were nearly identical to the form letters but included additional information. Comments were also... abalone and its habitat. Comment 29: In one of the form letters submitted by a supporter of CBD, one...

48 CFR 1852.227-11 - Patent Rights-Retention by the Contractor (Short Form).

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Both the electronic and paper versions of NASA Form 1679 may be accessed at the electronic New Technology Reporting Web site http://invention.nasa.gov. (End of addition) (f)(5) The Contractor shall... subparagraph (c)(1). NASA prefers that the contractor use either the electronic or paper version of NASA Form...

48 CFR 1852.227-11 - Patent Rights-Retention by the Contractor (Short Form).

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Both the electronic and paper versions of NASA Form 1679 may be accessed at the electronic New Technology Reporting Web site http://invention.nasa.gov. (End of addition) (f)(5) The Contractor shall... subparagraph (c)(1). NASA prefers that the contractor use either the electronic or paper version of NASA Form...

48 CFR 1852.227-11 - Patent Rights-Retention by the Contractor (Short Form).

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Both the electronic and paper versions of NASA Form 1679 may be accessed at the electronic New Technology Reporting Web site http://invention.nasa.gov. (End of addition) (f)(5) The Contractor shall... subparagraph (c)(1). NASA prefers that the contractor use either the electronic or paper version of NASA Form...

45 CFR Appendix B to Part 96 - SSBG Reporting Form and Instructions

Code of Federal Regulations, 2010 CFR

2010-10-01

... any data must appear elsewhere in the annual report. Report Submission Using PC Diskettes States with personal computer (PC) equipment may submit this data using PC diskettes in addition to the hardcopy form...

45 CFR Appendix B to Part 96 - SSBG Reporting Form and Instructions

Code of Federal Regulations, 2011 CFR

2011-10-01

... any data must appear elsewhere in the annual report. Report Submission Using PC Diskettes States with personal computer (PC) equipment may submit this data using PC diskettes in addition to the hardcopy form...

Robot-based additive manufacturing for flexible die-modelling in incremental sheet forming

NASA Astrophysics Data System (ADS)

Rieger, Michael; Störkle, Denis Daniel; Thyssen, Lars; Kuhlenkötter, Bernd

2017-10-01

The paper describes the application concept of additive manufactured dies to support the robot-based incremental sheet metal forming process (`Roboforming') for the production of sheet metal components in small batch sizes. Compared to the dieless kinematic-based generation of a shape by means of two cooperating industrial robots, the supporting robot models a die on the back of the metal sheet by using the robot-based fused layer manufacturing process (FLM). This tool chain is software-defined and preserves the high geometrical form flexibility of Roboforming while flexibly generating support structures adapted to the final part's geometry. Test series serve to confirm the feasibility of the concept by investigating the process challenges of the adhesion to the sheet surface and the general stability as well as the influence on the geometric accuracy compared to the well-known forming strategies.

International Headache Society classification: new proposals about chronic headache.

PubMed

Manzoni, G C; Torelli, P

2003-05-01

In the International Headache Society (IHS) classification of 1988, chronic daily headache (CDH) forms are not exhaustively categorized. The forthcoming revision of the classification will include a number of CDH forms that had been reported prior to 1988 or have been identified after that date. In particular, chronic migraine will be added to the classification as a complication of migraine, provided that use of symptomatic drugs does not exceed 10 days per month. In addition to chronic cluster headache and chronic paroxysmal hemicrania, short-lasting unilateral neuralgiform headache with conjunctival injection and tearing (SUNCT) and hemicrania continua will be comprised among CDH forms with short-lived attacks. Hypnic headache will be included in Group 4 ("Other primary headaches"). No additions will be made to the new IHS classification for forms such as new daily persistent headache (NDPH) and cervicogenic headache as proposed by Sjaastad.

Mechanism of wear and tribofilm formation with ionic liquids and ashless antiwear additives

NASA Astrophysics Data System (ADS)

Sharma, Vibhu

Increasingly stringent government regulation on emissions (EPA Emissions Standard Reference Guide and latest CAFE standards requiring an average fuel economy of 54.5 mpg (combined cars and trucks) by 2025) impose significant challenges to the automotive and lubricant industries calling for the development and implementation of lower viscosity ILSAC GF-5&6 and API-CJ4&5 oils which further limit the amount of SAPS and deposits in engines. Development of additives that result in lower ash content, volatility and anti-wear property plays a crucial role in being able to reach these standards. The current industrial additive technology i.e. zinc dialkyldithiophosphate (ZDDP) forms harmful deposits on catalytic convertor due to the volatility of Zn, S and P which, impairs its functionality and consequently results in higher emission from vehicles. In this research work, ionic liquids (IL's) that are non-volatile have been studied as new generation environment friendly antiwear additives along with other ashless anti-wear additives including boron based additives to overcome the current challenges of improving the fuel efficiency and reducing the amount of hazardous emissions. The goal of this thesis work is to study the tribological performance of selected IL's and develop a comprehensive understating of IL's chemistry and its consequences to their friction and wear outcomes. As first approach, various P, S and F based ionic liquids are studied for their tribological properties by analyzing the friction and wear results generated using standard tribological experiments. Following this, advanced surface characterization techniques such as X-ray absorption near edge structure (XANES) spectroscopy, SEM, Nano-indentation, SPM techniques are used to investigate the chemical-mechanical properties of the antiwear films. Results indicate that the tribological properties of ionic liquids depend on their solubility in base oil (BO) as well as their chemical interaction with the rubbing surfaces. To address the solubility issue of IL's in BO, ILs with longer alkyl chain structure were carefully selected which helped enhance the van der waals interaction between strongly polar ILs and non-polar base oil. The interaction of IL's with the metal surfaces was examined by analyzing the chemical-mechanical properties of the antiwear films formed. Results indicate that ionic liquids do react with the steel surfaces and form a protective antiwear film composed of iron polyphosphates i.e. short to medium chain length which results in improved wear protection. In addition, soluble boron additive (SB) chemistries were blended with ionic liquids to study the synergism between these two ashless antiwear chemistries. Addition of soluble boron additive (SB) to phosphorous based IL (P_DEHP) reduces the incubation time for antiwear film formation by forming boron oxide/boron phosphate film as early as the rubbing starts and subsequently a more durable iron phosphate film is formed providing long lasting wear protection. The synergistic interaction of boron chemistry with phosphorous based ionic liquids provides superior antiwear properties while eliminating volatile elements such as Zn and S from the additive technology.

21 CFR 172.385 - Whole fish protein concentrate.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CONSUMPTION Special Dietary and Nutritional Additives § 172.385 Whole fish protein concentrate. The food additive whole fish protein concentrate may be safely used as a food supplement in accordance with the... fish that are used in other forms for human food. (b) The additive consists essentially of a dried fish...

Electromagnetic structure of the proton within the CP-violation hypothesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krutov, A. F., E-mail: krutov@ssu.samara.ru; Kudinov, M. Yu., E-mail: kudinov@ssu.samara.ru

2013-11-15

The so-called non-Rosenbluth behavior of the proton electromagnetic form factors can be explained within the hypothesis of CP violation in electromagnetic processes involving composite systems of strongly interacting particles. It is shown that this hypothesis leads to the appearance of an additional, anapole, form factor of the proton. The proton electromagnetic form factors, including the anapole form factor, are estimated on the basis of experimental data on elastic electron-proton scattering.

Synthesis and Characterization of Antimicrobial Nanomaterials

DTIC Science & Technology

2013-01-01

coatings have broad application in medical and food processing fields. Additional potential exists for active disinfection/decontamination processes as well...technique to form homogenous silica nanoparticles. The reaction also provides a method to entrap additional enzyme in silica matrices. When additional ...elucidate the mechanism of lysozyme-mediated silica formation.22 The biocidal spectrum of the material can be broadened by addition of other

Active mineral additives of sapropel ashes

NASA Astrophysics Data System (ADS)

Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

2015-01-01

The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

Dewetting behavior of polystyrene film filled with (C6H5C2H4NH3)2PbI4

NASA Astrophysics Data System (ADS)

Xue, Longjian; Cheng, Ziyong; Fu, Jun; Han, Yanchun

2008-08-01

The dewetting behavior of thin (about 30 nm) polystyrene (PS) films filled with different amount of (C6H5C2H4NH3)2PbI4 (PhE-PbI4) on the silicon substrate with a native oxide layer was investigated. For different additive concentrations, PhE-PbI4 showed different spatial distributions in the PS films, which had a strong influence on the film wettability, dewetting dynamics, and mechanism. With 0.5 wt % additive, PhE-PbI4 formed a noncontinuous diffusion layer, which caused a continuous hole nucleation in the film. With about 1 wt % additive, a continuous gradient distribution layer of PhE-PbI4 formed in the film, which inhibited the dewetting. When the concentration is higher (2 wt %), large PhE-PbI4 aggregates, in addition to the PhE-PbI4 continuous layer, formed in the film. These large aggregates (larger than radius of gyration of PS) migrated to the interface, resulting in the hole nucleation and eventually the complete dewetting of the film.

Current Thoughts on Reactive Element Effects in Alumina-Forming Systems: In Memory of John Stringer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naumenko, D.; Pint, B. A.; Quadakkers, W. J.

In memory of John Stringer (1934–2014), one of the leaders in studying the reactive element (RE) effects, this paper reviews the current status of understanding of the effect of RE dopants on high-temperature oxidation behavior, with an emphasis on recent research related to deploying alumina-forming alloys and coatings with optimal performance in commercial systems. Additionally, to the well-known interaction between indigenous sulfur and RE additions, effects have been observed with C, N, and O found in commercial alloys and coatings. While there are many similarities between alumina-forming alloys and coatings, the latter bring additional complicating factors such as the effectsmore » of O incorporation during thermal spraying MCrAlY coatings, coating roughness, and heat treatments that must be considered in optimizing the beneficial dopant addition. We can see analogies between RE effects in alloys and in the substrates beneath diffusion M–Al coatings. Recently, there has been more interest in the influence of mixed oxidant environments, since these may modify the manifestation of the RE effect. Some thoughts are provided on optimizing the RE benefit and modeling oxidation of RE-doped alloys.« less

Current Thoughts on Reactive Element Effects in Alumina-Forming Systems: In Memory of John Stringer

DOE PAGES

Naumenko, D.; Pint, B. A.; Quadakkers, W. J.

2016-05-06

In memory of John Stringer (1934–2014), one of the leaders in studying the reactive element (RE) effects, this paper reviews the current status of understanding of the effect of RE dopants on high-temperature oxidation behavior, with an emphasis on recent research related to deploying alumina-forming alloys and coatings with optimal performance in commercial systems. Additionally, to the well-known interaction between indigenous sulfur and RE additions, effects have been observed with C, N, and O found in commercial alloys and coatings. While there are many similarities between alumina-forming alloys and coatings, the latter bring additional complicating factors such as the effectsmore » of O incorporation during thermal spraying MCrAlY coatings, coating roughness, and heat treatments that must be considered in optimizing the beneficial dopant addition. We can see analogies between RE effects in alloys and in the substrates beneath diffusion M–Al coatings. Recently, there has been more interest in the influence of mixed oxidant environments, since these may modify the manifestation of the RE effect. Some thoughts are provided on optimizing the RE benefit and modeling oxidation of RE-doped alloys.« less

Method of repressing the precipitation of calcium fluozirconate

DOEpatents

Newby, B.J.; Rhodes, D.W.

1973-12-25

Boric acid or a borate salt is added to aqueous solutions of fluoride containing radioactive wastes generated during the reprocessing of zirconium alloy nuclear fuels which are to be converted to solid form by calcining in a fluidized bed. The addition of calcium nitrate to the aqueous waste solutions to prevent fluoride volatility during calcination, causes the precipitation of calcium fluozirconate, which tends to form a gel at fluoride concentrations of 3.0 M or greater. The boron containing species introduced into the solution by the addition of the boric acid or borate salt retard the formation of the calcium fluozirconate precipitate and prevent formation of the gel. These boron containing species can be introduced into the solution by the addition of a borate salt but preferably are introduced by the addition of an aqueous solution of boric acid. (Official Gazette)

Poly(acrylic acid) to induce competitive crystallization of a theophylline/oxalic acid cocrystal and a theophylline polymorph

NASA Astrophysics Data System (ADS)

Jang, Jisun; Kim, Il Won

2016-01-01

Polymeric additives to induce competitive crystallization of pharmaceutical compounds were explored. A cocrystal of theophylline and oxalic acid was used as a model system, and poly(acrylic acid), poly(caprolactone), and poly(ethylene glycol) were the additives. The cocrystal formation was selectively hindered with addition of poly(acrylic acid). First the size of the cocrystals were reduced, and eventually the cocrystallization was inhibited to generate neat theophylline crystals. The theophylline crystals were of a distinctively different crystal structure from known polymorphs, based on powder X-ray diffraction. They were also obtained in nanoscale size, when millimeter-scale crystals formed without poly(acrylic acid). Polymeric additives that could form specific interactions with crystallizing compounds seem to be useful tools for the phase and size control of pharmaceutical crystals.

Tetraethyl orthosilicate-based glass composition and method

DOEpatents

Wicks, G.G.; Livingston, R.R.; Baylor, L.C.; Whitaker, M.J.; O`Rourke, P.E.

1997-06-10

A tetraethyl orthosilicate-based, sol-gel glass composition with additives selected for various applications is described. The composition is made by mixing ethanol, water, and tetraethyl orthosilicate, adjusting the pH into the acid range, and aging the mixture at room temperature. The additives, such as an optical indicator, filler, or catalyst, are then added to the mixture to form the composition which can be applied to a substrate before curing. If the additive is an indicator, the light-absorbing characteristics of which vary upon contact with a particular analyte, the indicator can be applied to a lens, optical fiber, reagent strip, or flow cell for use in chemical analysis. Alternatively, an additive such as alumina particles is blended into the mixture to form a filler composition for patching cracks in metal, glass, or ceramic piping. 12 figs.

Effects of multiple enzyme-substrate interactions in basic units of cellular signal processing

NASA Astrophysics Data System (ADS)

Seaton, D. D.; Krishnan, J.

2012-08-01

Covalent modification cycles are a ubiquitous feature of cellular signalling networks. In these systems, the interaction of an active enzyme with the unmodified form of its substrate is essential for signalling to occur. However, this interaction is not necessarily the only enzyme-substrate interaction possible. In this paper, we analyse the behaviour of a basic model of signalling in which additional, non-essential enzyme-substrate interactions are possible. These interactions include those between the inactive form of an enzyme and its substrate, and between the active form of an enzyme and its product. We find that these additional interactions can result in increased sensitivity and biphasic responses, respectively. The dynamics of the responses are also significantly altered by the presence of additional interactions. Finally, we evaluate the consequences of these interactions in two variations of our basic model, involving double modification of substrate and scaffold-mediated signalling, respectively. We conclude that the molecular details of protein-protein interactions are important in determining the signalling properties of enzymatic signalling pathways.

Undoped Polyaniline/Surfactant Complex for the Corrosion Prevention

NASA Technical Reports Server (NTRS)

Liu, Lo-Min; Levon, Kalle

1998-01-01

Due to the strict regulations on the usage of heavy metals as the additives in the coating industries, the search for effective organic corrosion inhibitors in replace of those metal additives has become essential. Electrically conducting polymers have been shown to be effective for corrosion prevention but the poor solubility of these intractable polymers has been a problem. We have explored a polyaniline/4-dodecylphenol complex (PANi/DDPh) to improve the dissolution and it has been shown to be an effective organic corrosion inhibitor. With the surfactant, DDPh, PANi could be diluted into the coatings and the properties of the coatings were affected. Emeraldine base (EB) form of PANi was also found to be oxidized by the hardener. The oxidized form of polyaniline provides improved corrosion protection of metals than that of emeraldine base since the value of the standard electrode potential for the oxidized form of PANi is higher than that of EB. Additionally, the surfactant improves the wet adhesion property between the coating and the metal surface.

Superoxide reaction with tyrosyl radicals generates para-hydroperoxy and para-hydroxy derivatives of tyrosine.

PubMed

Möller, Matías N; Hatch, Duane M; Kim, Hye-Young H; Porter, Ned A

2012-10-10

Tyrosine-derived hydroperoxides are formed in peptides and proteins exposed to enzymatic or cellular sources of superoxide and oxidizing species as a result of the nearly diffusion-limited reaction between tyrosyl radical and superoxide. However, the structure of these products, which informs their reactivity in biology, has not been unequivocally established. We report here the complete characterization of the products formed in the addition of superoxide, generated from xanthine oxidase, to several peptide-derived tyrosyl radicals, formed from horseradish peroxidase. RP-HPLC, LC-MS, and NMR experiments indicate that the primary stable products of superoxide addition to tyrosyl radical are para-hydroperoxide derivatives (para relative to the position of the OH in tyrosine) that can be reduced to the corresponding para-alcohol. In the case of glycyl-tyrosine, a stable 3-(1-hydroperoxy-4-oxocyclohexa-2,5-dien-1-yl)-L-alanine was formed. In tyrosyl-glycine and Leu-enkephalin, which have N-terminal tyrosines, bicyclic indolic para-hydroperoxide derivatives were formed ((2S,3aR,7aR)-3a-hydroperoxy-6-oxo-2,3,3a,6,7,7a-hexahydro-1H-indole-2-carboxylic acid) by the conjugate addition of the free amine to the cyclohexadienone. It was also found that significant amounts of the para-OH derivative were generated from the hydroxyl radical, formed on exposure of tyrosine-containing peptides to Fenton conditions. The para-OOH and para-OH derivatives are much more reactive than other tyrosine oxidation products and may play important roles in physiology and disease.

Environmental impact assessment of radionuclides and trace elements at the Kurday U mining site, Kazakhstan.

PubMed

Salbu, B; Burkitbaev, M; Strømman, G; Shishkov, I; Kayukov, P; Uralbekov, B; Rosseland, B O

2013-09-01

The Kurday uranium mining site in Kazakhstan operated from 1954 to 1965 as part of the USSR nuclear weapon programme. To assess the environmental impact of radionuclides and trace elements associated with the Kurday mining site, field expeditions were performed in 2006. In addition to in situ gamma and (220)Rn dose rate measurements, sampling included at site fractionation of water as well as sampling of water, fish, sediment, soils and vegetation. The concentrations of U and associated trace metals were enriched in the Pit Lake and in the artesian water (U exceeding the WHO guideline value for drinking water), and decreased downstream from the mining area. Uranium, As, Mo and Ni were predominantly present as mobile low molecular mass species in waters, while a significant proportion of Cr, Mn and Fe were associated with colloids and particles. Due to oxidation of divalent iron in the artesian ground water upon contact with air, Fe served as scavenger for other elements, and peak concentrations of U-, Ra-isotopes, As and Mn were seen. Most radionuclides and trace elements were contained in minerals in soils and sediments, and good correlations were obtained between U and As, Cd, Mo and (226)Ra. Based on sequential extractions, a significant fraction of U, Pb and Cd could be considered mobile. Radioactive particles carrying significant amount of trace metals may represent a hazard during strong wind events. The transfer of radionuclides and metals from soils or sediments to water was in general low. The Kd levels varied with the element in question, ranging from 0.5 to 3 × 10(2) L/kg d.w. for (238)U being relatively mobile, 10(3) for (226)Ra, As, Cd, Ni, to 10(4) L/kg d.w. for Cu, Cr and Pb being rather inert The transfer of radionuclides and metals from soils to vegetation (TF) was low, while higher if the transfer to vegetation, especially underwater mosses, occurred via water (e.g., BCF 37 L/kg w.w. for (238)U and 3 × 10(3) L/kg w.w. for (226)Ra). The transfer of Cd, Pb and As from water to fish liver (BCF) was rather high, showing BCFs in the range of 10(2)-10(3) L/kg w.w., and may, if eaten, represent a health risk. Furthermore, the high Hg level in fish filet reaching 0.3 mg/kg w.w. muscle and the tendency of biomagnification call for dietary restrictions. Total gamma and Rn dose rate to man amounted to about 6 mSv/y, while the highest calculated dose rate for non-human species based on the ERICA Assessment Tool were obtained in aquatic plants, with calculated mean doses of 700 μGy/hr, mostly due to the U exposure. Overall, it is concluded that measures such as restricted access to the Pit Lake as well as dietary restrictions with respect to drinking water and intake of fish should be taken to reduce the environmental risk to man and biota. Copyright © 2012. Published by Elsevier Ltd.

[Formulation and special investigations of innovative intraoral solid dosage forms.

PubMed

Kristo, K; kATONA, B; Piukovics, P; Olah, I; Sipos, B; Sipos, S E; Sovany, T; Hodi, K; Ifi Regdon, G

During our work, we summarized the types of solid dosage forms which were in the focus of attention in the last years because of their innovative pharmaceutical technology solution and simple use. The biopharmaceutics of solid dosage forms for intraoral use and the advantages of the use of these dosages forms were presented in general. However, these dosage forms cannot always be prepared with conventional pharmaceutical processes, therefore the special pharmaceutical solutions which can be applied for their preparation were presented. In addition to testing the European Pharmacopoeia dosage forms, the special tests which can be applied for the characterization of innovative solid dosage forms were highlighted.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fan, Jiwen; Rosenfeld, Daniel; Zhang, Yuwei

Aerosol-cloud interactions remain the largest uncertainty in climate projections. Ultrafine aerosol particles smaller than 50 nanometers (UAP <50) can be abundant in the troposphere, but are conventionally considered too small to affect cloud formation. However, observational evidence and numerical simulations of deep convective clouds (DCCs) over the Amazon show that DCCs forming in a low aerosol environment can develop very large vapor supersaturation because fast droplet coalescence reduces integrated droplet surface area and subsequent condensation. UAP <50 from pollution plumes that are ingested into such clouds can be activated to form additional cloud droplets on which excess supersaturation condenses andmore » forms additional cloud water and latent heating, thus intensifying convective strength. This mechanism suggests a strong anthropogenic invigoration of DCCs in previously pristine regions of the world.« less

Microencapsulation of Natural Anthocyanin from Purple Rosella Calyces by Freeze Drying

NASA Astrophysics Data System (ADS)

Nafiunisa, A.; Aryanti, N.; Wardhani, D. H.; Kumoro, A. C.

2017-11-01

Anthocyanin extract in powder form will improve its use since the powder is easier to store and more applicable. Microencapsulation method is introduced as an efficient way for protecting pigment such as anthocyanin. This research was aimed to characterise anthocyanin encapsulated products prepared from purple Roselle calyces by freeze drying. The liquid anthocyanin extracts from ultrasound-assisted extraction were freeze-dried with and without the addition of 10% w/w maltodextrins as a carrier and coating agents. The quality attributes of the powders were characterised by their colour intensity, water content, and solubility. Analysis of encapsulated material was performed for the powder added by maltodextrin. The stability of the microencapsulated pigment in solution form was determined for 11 days. Total anthocyanin content was observed through pH differential method. The results of the colour intensity analysis confirm that the product with maltodextrin addition has more intense colour with L* value of 29.69 a* value of 54.29 and b* value of 8.39. The result with the addition of maltodextrin has less moisture content and more soluble in water. It is verified that better results were obtained for powder with maltodextrin addition. Anthocyanin in the powder form with maltodextrin addition exhibits higher stability even after 11 days. In conclusion, the microencapsulation of anthocyanin with maltodextrin as a carrier and coating agent presented a potential method to produce anthocyanin powder from purple Roselle.

32 CFR 887.7 - Persons separated under other than honorable conditions (undesirable or bad conduct) or...

Code of Federal Regulations, 2010 CFR

2010-07-01

.... However, an official photocopy of the report of separation or certificate of discharge (DD Form 214... written request of the member. (a) On the DD Forms 214 issued before October 1, 1979, the following items...). (b) For DD Forms 214 issued after October 1, 1979, send one copy with the Special Additional...

78 FR 19580 - Proposed Collection; Comment Request for Information Collection Tools

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-01

... transmit W-2 series forms to the Social Security Administration. Forms W-2c, W-3c and W-3cPR are used to.... Income Tax Return, Schedule B- Additional Information for Schedule M-3 Filers, Schedule D-Capital Gains... gains and losses from the sale of capital assets. Schedule H (Form 1120) is used by personal service...

76 FR 44566 - Endangered and Threatened Wildlife and Plants; 12-Month Finding on a Petition To List the Frigid...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-26

... years after Baker (1927) first described the species, the fossil form was reclassified as distinct from..., identification of the fossil form used fossil shell characterics only. In 1985, Terrence Frest (1985, p. 4.... Prior to this, the species was thought to only occur in fossil form. What were thought to be additional...

77 FR 66887 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-07

..., Washington, DC 20549-0213. Extension: Form N-1A; OMB Control No. 3235-0307, SEC File No. 270-21. Notice is... Management and Budget (``OMB'') for extension and approval. Form N-1A (17 CFR 239.15A and 274.11A) is the.... Form N-1A also permits funds to provide investors with a prospectus and a statement of additional...

Electronic data collection for clinical trials using tablet and handheld PCs

NASA Astrophysics Data System (ADS)

Alaoui, Adil; Vo, Minh; Patel, Nikunj; McCall, Keith; Lindisch, David; Watson, Vance; Cleary, Kevin

2005-04-01

This paper describes a system that uses electronic forms to collect patient and procedure data for clinical trials. During clinical trials, patients are typically required to provide background information such as demographics and medical history, as well as review and complete any consent forms. Physicians or their assistants then usually have additional forms for recording technical data from the procedure and for gathering follow-up information from patients after completion of the procedure. This approach can lead to substantial amounts of paperwork to collect and manage over the course of a clinical trial with a large patient base. By using e-forms instead, data can be transmitted to a single, centralized database, reducing the problem of managing paper forms. Additionally, the system can provide a means for relaying information from the database to the physician on his/her portable wireless device, such as to alert the physician when a patient has completed the pre-procedure forms and is ready to begin the procedure. This feature could improve the workflow in busy clinical practices. In the future, the system could be expanded so physicians could use their portable wireless device to pull up entire hospital records and view other pre-procedure data and patient images.

Epsilon Metal Waste Form for Immobilization of Noble Metals from Used Nuclear Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crum, Jarrod V.; Strachan, Denis M.; Rohatgi, Aashish

2013-10-01

Epsilon metal (ε-metal), an alloy of Mo, Pd, Rh, Ru, and Tc, is being developed as a waste form to treat and immobilize the undissolved solids and dissolved noble metals from aqueous reprocessing of commercial used nuclear fuel. Epsilon metal is an attractive waste form for several reasons: increased durability relative to borosilicate glass, it can be fabricated without additives (100% waste loading), and in addition it also benefits borosilicate glass waste loading by eliminating noble metals from the glass and thus the processing problems related there insolubility in glass. This work focused on the processing aspects of the epsilonmore » metal waste form development. Epsilon metal is comprised of refractory metals resulting in high reaction temperatures to form the alloy, expected to be 1500 - 2000°C making it a non-trivial phase to fabricate by traditional methods. Three commercially available advanced technologies were identified: spark-plasma sintering, microwave sintering, and hot isostatic pressing, and investigated as potential methods to fabricate this waste form. Results of these investigations are reported and compared in terms of bulk density, phase assemblage (X-ray diffraction and elemental analysis), and microstructure (scanning electron microscopy).« less

Methods for tape fabrication of continuous filament composite parts and articles of manufacture thereof

DOEpatents

Weisberg, Andrew H

2013-10-01

A method for forming a composite structure according to one embodiment includes forming a first ply; and forming a second ply above the first ply. Forming each ply comprises: applying a bonding material to a tape, the tape comprising a fiber and a matrix, wherein the bonding material has a curing time of less than about 1 second; and adding the tape to a substrate for forming adjacent tape winds having about a constant distance therebetween. Additional systems, methods and articles of manufacture are also presented.

The mechanical problems on additive manufacturing of viscoelastic solids with integral conditions on a surface increasing in the growth process

NASA Astrophysics Data System (ADS)

Parshin, D. A.; Manzhirov, A. V.

2018-04-01

Quasistatic mechanical problems on additive manufacturing aging viscoelastic solids are investigated. The processes of piecewise-continuous accretion of such solids are considered. The consideration is carried out in the framework of linear mechanics of growing solids. A theorem about commutativity of the integration over an arbitrary surface increasing in the solid growing process and the time-derived integral operator of viscoelasticity with a limit depending on the solid point is proved. This theorem provides an efficient way to construct on the basis of Saint-Venant principle solutions of nonclassical boundary-value problems for describing the mechanical behaviour of additively formed solids with integral satisfaction of boundary conditions on the surfaces expanding due to the additional material influx to the formed solid. The constructed solutions will retrace the evolution of the stress-strain state of the solids under consideration during and after the processes of their additive formation. An example of applying the proved theorem is given.

The Effect of Additives on the Early Stages of Growth of Calcite Single Crystals

PubMed Central

Freeman, Colin L.; Gong, Xiuqing; Levenstein, Mark A.; Wang, Yunwei; Kulak, Alexander; Anduix‐Canto, Clara; Lee, Phillip A.; Li, Shunbo; Chen, Li; Christenson, Hugo K.

2017-01-01

Abstract As crystallization processes are often rapid, it can be difficult to monitor their growth mechanisms. In this study, we made use of the fact that crystallization proceeds more slowly in small volumes than in bulk solution to investigate the effects of the soluble additives Mg2+ and poly(styrene sulfonate) (PSS) on the early stages of growth of calcite crystals. Using a “Crystal Hotel” microfluidic device to provide well‐defined, nanoliter volumes, we observed that calcite crystals form via an amorphous precursor phase. Surprisingly, the first calcite crystals formed are perfect rhombohedra, and the soluble additives have no influence on the morphology until the crystals reach sizes of 0.1–0.5 μm for Mg2+ and 1–2 μm for PSS. The crystals then continue to grow to develop morphologies characteristic of these additives. These results can be rationalized by considering additive binding to kink sites, which is consistent with crystal growth by a classical mechanism. PMID:28767197

21 CFR 172.830 - Succinylated monoglycerides.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of glycerol with edible fat-forming fatty acids. (b) The additive meets the following specifications: Succinic acid content: 14.8%-25.6% Melting point: 50 °C-60 °C. Acid number: 70-120 (c) The additive is used... additive is a mixture of semi-and neutral succinic acid esters of mono- and diglycerides produced by the...

7 CFR 1955.66 - Lease of real property.

Code of Federal Regulations, 2014 CFR

2014-01-01

... will include a copy of the completed and signed Form SCS-CPA-26, “Highly Erodible Land and Wetland.... Additionally, a copy of the completed and signed Form SCS-CPA-26 will be attached to the lease and the lease...

7 CFR 1955.66 - Lease of real property.

Code of Federal Regulations, 2012 CFR

2012-01-01

... will include a copy of the completed and signed Form SCS-CPA-26, “Highly Erodible Land and Wetland.... Additionally, a copy of the completed and signed Form SCS-CPA-26 will be attached to the lease and the lease...

7 CFR 1955.66 - Lease of real property.

Code of Federal Regulations, 2013 CFR

2013-01-01

... will include a copy of the completed and signed Form SCS-CPA-26, “Highly Erodible Land and Wetland.... Additionally, a copy of the completed and signed Form SCS-CPA-26 will be attached to the lease and the lease...

Noncovalent Polymerization of Mesogens Crystallizes Lysozyme: Correlation between Nonamphiphilic Lyotropic Liquid Crystal Phase and Protein Crystal Formation

PubMed Central

Simon, Karen A.; Shetye, Gauri S.; Englich, Ulrich; Wu, Lei; Luk, Yan-Yeung

2011-01-01

Crystallization of proteins is important for fundamental studies and biopharmaceutical development but remains largely an empirical science. Here, we report the use of organic salts that can form a class of unusual non-amphiphilic lyotropic liquid crystals to crystallize the protein lysozyme. Certain non-amphiphilic organic molecules with fused aromatic rings and two charges can assemble into stable thread-like noncovalent polymers that may further form liquid crystal phases in water, traditionally termed chromonic liquid crystals. Using five of these mesogenic molecules as additives to induce protein crystallization, we discover that molecules that can form liquid crystal phases in water are highly effective at inducing the crystal formation of lysozyme, even at concentrations significantly lower than that required for forming liquid crystal phases. This result reveals an example of inducing protein crystallization by the molecular assembly of the additives, and is consistent with a new mechanism by which the strong hydration of an assembly process provides a gradual means to compete for the water molecules to enable solvated proteins to form crystals. PMID:21786812

Implementation Guideline for Maintenance Line Operations Safety Assessment (M-LOSA) and Ramp LOSA (R-LOSA) Programs

DTIC Science & Technology

2012-08-01

additional threats and errors in the corresponding form. Make sure your handwriting is legible. Keep a n ope n mind, eve n if you feel pe ople are doing...observation form. Write on additional threats and errors. Make sure your handwriting is legible. On a piece of bla nk pa per, you m ay want to m...to see a briefing report on this round of LOSA in a month. The report does not contain any identifiable information. In fact, it does not say

Enolization of acetone in superheated water detected via radical formation.

PubMed

Ghandi, Khashayar; Addison-Jones, Brenda; Brodovitch, Jean-Claude; McCollum, Brett M; McKenzie, Iain; Percival, Paul W

2003-08-13

Muoniated free radicals have been detected in muon-irradiated aqueous solutions of acetone at high temperatures and pressures. At temperatures below 250 degrees C, the radical product is consistent with muonium addition to the keto form of acetone. However, at higher temperatures, a different radical was detected, which is attributed to muonium addition to the enol form. Muon hyperfine coupling constants have been determined for both radicals over a wide range of temperatures, significantly extending the range of conditions under which these radicals and the keto-enol equilibrium have been studied.

15 CFR 782.1 - Overview of reporting requirements under the APR.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL... (see § 782.5 of the APR). In addition, forms may be downloaded from the Internet at http://www.ap.gov. ...

15 CFR 782.1 - Overview of reporting requirements under the APR.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL... (see § 782.5 of the APR). In addition, forms may be downloaded from the Internet at http://www.ap.gov. ...

15 CFR 782.1 - Overview of reporting requirements under the APR.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL... (see § 782.5 of the APR). In addition, forms may be downloaded from the Internet at http://www.ap.gov. ...

15 CFR 782.1 - Overview of reporting requirements under the APR.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL... (see § 782.5 of the APR). In addition, forms may be downloaded from the Internet at http://www.ap.gov. ...

Formation of peptides from amino acids by single or multiple additions of ATP to suspensions of nucleoproteinoid microparticles

NASA Technical Reports Server (NTRS)

Nakashima, T.; Fox, S. W.

1981-01-01

The synthesis of peptides from individual amino acids or pairs of amino acids and ATP in the presence of catalysis by nucleoproteinoid microparticles is investigated. Experiments were performed with suspensions formed from the condensation of lysine-rich and acidic proteinoids with polyadenylic acid, to which were added glycine, phenylalanine, proline, lysine or glycine-phenylalanine mixtures, and ATP either at once or serially. Peptide yields are found to be greatest for equal amounts of acidic and basic proteinoids. The addition of imidazole is found to alter the preference of glycine-phenylalanine mixtures to form mixed heteropeptides rather than homopeptides. A rapid ATP decay in the peptide synthesis reaction is observed, and a greater yield is obtained for repeated small additions than for a single addition of ATP. The experimental system has properties similar to modern cells, and represents an organizational unit ready for the evolution of associated biochemical pathways.

Effect of electronegative additives on physical properties and chemical activity of gas discharge plasma

NASA Astrophysics Data System (ADS)

Kuznetsov, D. L.; Filatov, I. E.; Uvarin, V. V.

2018-01-01

Effect of electronegative additives (oxygen O2, sulfur dioxide SO2, carbon disulfide CS2, and carbon tetrachloride CCl4) on physical properties and chemical activity of plasma formed by pulsed corona discharge and by non-self-sustained discharge supported by pulsed electron beam in atmospheric pressure gas mixtures was investigated. It is shown that a decrease in discharge current depends on a sort of the additive and on its concentration. The reason is the difference in rate constants of electron attachment processes for the above molecules. In experiments on volatile organic compounds (VOCs) conversion in air by streamer corona it is obtained that an addition of CCl4 both decreases the discharge current amplitude and increases the VOCs conversion degree. An installation for investigation of electron attachment processes and for study of toxic impurities conversion in plasma formed by non-self-sustained discharge initiated by pulsed nanosecond electron beam is created.

Additive Classical Capacity of Quantum Channels Assisted by Noisy Entanglement.

PubMed

Zhuang, Quntao; Zhu, Elton Yechao; Shor, Peter W

2017-05-19

We give a capacity formula for the classical information transmission over a noisy quantum channel, with separable encoding by the sender and limited resources provided by the receiver's preshared ancilla. Instead of a pure state, we consider the signal-ancilla pair in a mixed state, purified by a "witness." Thus, the signal-witness correlation limits the resource available from the signal-ancilla correlation. Our formula characterizes the utility of different forms of resources, including noisy or limited entanglement assistance, for classical communication. With separable encoding, the sender's signals across multiple channel uses are still allowed to be entangled, yet our capacity formula is additive. In particular, for generalized covariant channels, our capacity formula has a simple closed form. Moreover, our additive capacity formula upper bounds the general coherent attack's information gain in various two-way quantum key distribution protocols. For Gaussian protocols, the additivity of the formula indicates that the collective Gaussian attack is the most powerful.

Photochemistry of the Stilbenes in Methanol. Trapping the Common Phantom Singlet State.

PubMed

Saltiel, Jack; Gupta, Shipra

2018-06-21

A comparative study of the photochemistry of cis- and trans-stilbene in methanol shows that both isomers undergo methanol photoaddition giving similar yields of α-methoxybibenzyl in competition with cis-trans photoisomerization. Methanol addition occurs primarily following torsional relaxation of the lowest excited singlet states of each isomer, 1 c* and 1 t*, to a common twisted singlet excited state intermediate, 1 p*, initially called the phantom singlet state. The addition is consistent with the zwitterionic character of 1 p*. Ether forms by direct 1,2-addition of CH 3 OH to the central carbon atoms and by 1,1-addition following rearrangement to 1-benzyl-1-phenylcarbene. Use of CD 3 OD and GC/MS (gas chromatographic/mass spectroscopic) analysis of the ether products revealed that the ratio of carbene/direct addition pathways is higher starting from cis-stilbene. We conclude that 1 p* formed from 1 c* is hotter than 1 p* formed from 1 t*. Surprisingly, except for favoring the carbene pathway, the use of higher energy photons (254 vs 313 nm) does not affect the overall ether quantum yield starting from cis-stilbene, but significantly enhances both pathways starting from trans-stilbene. It appears that carbene formation and direct methanol addition to higher trans-stilbene excited state(s) compete with relaxation to S 1 . Substitution of D for the vinyl Hs of stilbene enhances the direct addition pathway more than two-fold and strongly suppresses the carbene insertion pathway, revealing a large, k pc d0 / k pc d2 = 6.3, primary deuterium isotope effect in the carbene rearrangement. The two-fold increase in the ether quantum yield is due primarily to a 2.75-fold increase in the lifetime of 1 p* on deuterium substitution of the vinyl hydrogens.

General public knowledge, preferred dosage forms, and beliefs toward medicines in western Saudi Arabia.

PubMed

Alhaddad, Mahmoud S; Abdallah, Qasem M; Alshakhsheer, Sami M; Alosaimi, Salman B; Althmali, Ahmed R; Alahmari, Solaiman A

2014-06-01

To measure general public knowledge, source of knowledge, preferred dosage forms, and beliefs toward medicines. A cross-sectional study design using convenience-sampling technique was used. A pre-validated questionnaire was designed and distributed to the general public through face-to-face interviews. All data were analyzed, and p-values less than 0.05 were considered significant. The study took place in the Clinical Pharmacy Department, Taif University, Taif, Kingdom of Saudi Arabia between August 2012 and February 2013 RESULTS: Nine hundred participants successfully responded to this study. Males represented two-thirds of the respondents (66.8%). In addition, 52% of respondents were of high education level. Modern (74.2%) and alternative medicines (88.7%) were understood by most respondents. Tablets (69.6%) and capsules (37.6%) represented the highest preferred dosage forms. In addition, physicians (66.6%) and pharmacists (46.2%) were the main sources of information regarding medicines. In terms of beliefs, respondents showed wrong beliefs in many statements used in this study. There is a need to improve public knowledge and beliefs toward medicines as well as utilizing public preferred dosage forms. In addition, pharmacists should play a major role in these programs since they are experts on medicines and play a more active role in patient education and counseling.

8 CFR 207.2 - Applicant processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADMISSION OF REFUGEES § 207.2 Applicant processing. (a) Forms. Each applicant who seeks admission as a refugee shall submit an individual Form I-590 (Registration for Classification as Refugee). Additionally, each applicant 14 years old...

Method for the removal of ultrafine particulates from an aqueous suspension

DOEpatents

Chaiko, David J.; Kopasz, John P.; Ellison, Adam J. G.

2000-01-01

A method of separating ultra-fine particulates from an aqueous suspension such as a process stream or a waste stream. The method involves the addition of alkali silicate and an organic gelling agent to a volume of liquid, from the respective process or waste stream, to form a gel. The gel then undergoes syneresis to remove water and soluble salts from the gel containing the particulates, thus, forming a silica monolith. The silica monolith is then sintered to form a hard, nonporous waste form.

Method for the Removal of Ultrafine Particulates from an Aqueous Suspension

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chaiko, David J.; Kopasz, John P.; Ellison, Adam J.G.

1999-03-05

A method of separating ultra-fine particulate from an aqueous suspension such as a process stream or a waste stream. The method involves the addition of alkali silicate and an organic gelling agent to a volume of liquid, from the respective process or waste stream, to form a gel. The gel then undergoes syneresis to remove water and soluble salts from the gel-containing the particulate, thus, forming a silica monolith. The silica monolith is then sintered to form a hard, nonporous waste form.

26 CFR 301.1474-1 - Required use of magnetic media for financial institutions filing Form 1042-S or Form 8966.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 18 2014-04-01 2014-04-01 false Required use of magnetic media for financial... Information and Returns Returns and Records § 301.1474-1 Required use of magnetic media for financial... magnetic media. Additionally, if a financial institution is required to file Form 8966, “FATCA Report,” (or...

26 CFR 301.1474-1 - Required use of magnetic media for financial institutions filing Form 1042-S or Form 8966.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 18 2013-04-01 2013-04-01 false Required use of magnetic media for financial... Information and Returns Returns and Records § 301.1474-1 Required use of magnetic media for financial... magnetic media. Additionally, if a financial institution is required to file Form 8966, “FATCA Report,” (or...

12 CFR Appendix H to Part 1022 - Appendix H-Model Forms for Risk-Based Pricing and Credit Score Disclosure Exception Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... addresses that may change over time. ii. The addition of graphics or icons, such as the person's corporate... change the forms by rearranging the format or by making technical modifications to the language of the... required to conduct consumer testing when rearranging the format of the model forms. a. Acceptable changes...

12 CFR Appendix H to Part 222 - Appendix H-Model Forms for Risk-Based Pricing and Credit Score Disclosure Exception Notices

Code of Federal Regulations, 2014 CFR

2014-01-01

... addresses that may change over time. ii. The addition of graphics or icons, such as the person's corporate... rate. All forms contained in this appendix are models; their use is optional. 3. A person may change... required to conduct consumer testing when rearranging the format of the model forms. a. Acceptable changes...

Nitrogen Ion Form and Spatio-temporal Variation in Root Distribution Mediate Nitrogen Effects on Lifespan of Ectomycorrhizal Roots

NASA Astrophysics Data System (ADS)

Kou, L.; McCormack, M. L.; Chen, W.; Guo, D.; Wang, H.; Li, S.; Gao, W.; Yang, H.

2017-12-01

Background and Aims Absorptive roots active in soil resource uptake are often intimately associated with mycorrhizal fungi, yet it remains unclear how nitrogen (N) loading affects lifespan of absorptive roots associating with ectomycorrhizal (ECM) fungi. Methods Through a three-year minirhizotron experiment, we investigated the responses of ECM lifespan to different rates of N addition and examined the roles of N ion form, rooting depth, seasonal root cohort, and ECM morphotype in mediating the N effects on ECM lifespan in a slash pine (Pinus elliottii) forest in subtropical China. Results High rates of NH4Cl significantly decreased foliar P concentrations and increased foliar N: P ratios, and mean ECM lifespan was negatively correlated to foliar P concentration. N additions generally increased the lifespan of most ectomycorrhizas, but the specific differences were context dependent. N rates and forms exerted significant positive effects on ECM lifespan with stronger effects occurring at high N rates and under ammonium N addition. N additions extended lifespan of ectomycorrhizas in shallower soil and born in spring and autumn, but shortened lifespan of ectomycorrhizas in deeper soil and born in summer and winter. N additions reduced lifespan of dichotomous ectomycorrhizas, but increased lifespan of coralloid ectomycorrhizas. Conclusions The increased ECM lifespan in response to N additions may primarily be driven by the persistent and aggravated P limitation to plants. Our findings highlight the importance of environmental contexts in controlling ECM lifespan and the need to consider potential differences among mycorrhizal morphotypes when studying N—lifespan relationships of absorptive roots in the context of N deposition.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gill, Tobias G.; Fleurence, Antoine; Warner, Ben

We observe a new two-dimensional (2D) silicon crystal, using low energy electron diffraction (LEED) and scanning tunnelling microscopy (STM) and it's formed by depositing additional Si atoms onto spontaneously-formed epitaxial silicene on a ZrB 2 thin film. From scanning tunnelling spectroscopy (STS) studies, we find that this atomically-thin layered silicon has distinctly different electronic properties. Angle resolved photoelectron spectroscopy (ARPES) reveals that, in sharp contrast to epitaxial silicene, the layered silicon exhibits significantly enhanced density of states at the Fermi level resulting from newly formed metallic bands. Furthermore, the 2D growth of this material could allow for direct contacting tomore » the silicene surface and demonstrates the dramatic changes in electronic structure that can occur by the addition of even a single monolayer amount of material in 2D systems.« less

Stereocontrolled Cyanohydrin Ether Synthesis through Chiral Brønsted Acid-Mediated Vinyl Ether Hydrocyanation

PubMed Central

Lu, Chunliang; Su, Xiaoge; Floreancig, Paul E.

2013-01-01

Vinyl ethers can be protonated to generate oxocarbenium ions that react with Me3SiCN to form cyanohydrin alkyl ethers. Reactions that form racemic products proceed efficiently upon converting the vinyl ether to an α-chloro ether prior to cyanide addition in a pathway that proceeds through Brønsted acid-mediated chloride ionization. Enantiomerically enriched products can be accessed by directly protonating the vinyl ether with a chiral Brønsted acid to form a chiral ion pair. Me3SiCN acts as the nucleophile and PhOH serves as a stoichiometric proton source in a rare example of an asymmetric bimolecular nucleophilic addition reaction into an oxocarbenium ion. Computational studies provide a model for the interaction between the catalyst and the oxocarbenium ion. PMID:23968162

Substantial convection and precipitation enhancements by ultrafine aerosol particles

DOE PAGES

Fan, Jiwen; Rosenfeld, Daniel; Zhang, Yuwei; ...

2018-01-26

Aerosol-cloud interactions remain the largest uncertainty in climate projections. Ultrafine aerosol particles smaller than 50 nanometers (UAP <50) can be abundant in the troposphere, but are conventionally considered too small to affect cloud formation. However, observational evidence and numerical simulations of deep convective clouds (DCCs) over the Amazon show that DCCs forming in a low aerosol environment can develop very large vapor supersaturation because fast droplet coalescence reduces integrated droplet surface area and subsequent condensation. UAP <50 from pollution plumes that are ingested into such clouds can be activated to form additional cloud droplets on which excess supersaturation condenses andmore » forms additional cloud water and latent heating, thus intensifying convective strength. This mechanism suggests a strong anthropogenic invigoration of DCCs in previously pristine regions of the world.« less

Copper brain protein protection against free radical-induced neuronal death: Survival ratio in SH-SY5Y neuroblastoma cell cultures.

PubMed

Deloncle, Roger; Fauconneau, Bernard; Guillard, Olivier; Delaval, José; Lesage, Gérard; Pineau, Alain

2017-01-01

In Creutzfeldt Jakob, Alzheimer and Parkinson diseases, copper metalloproteins such as prion, amyloid protein precursor and α-synuclein are able to protect against free radicals by reduction from cupric Cu +2 to cupreous Cu + . In these pathologies, a regional copper (Cu) brain decrease correlated with an iron, zinc or manganese (Mn) increase has previously been observed, leading to local neuronal death and abnormal deposition of these metalloproteins in β-sheet structures. In this study we demonstrate the protective effect of Cu metalloproteins against deleterious free-radical effects. With neuroblastoma SH-SY5Y cell cultures, we show that bovine brain prion protein in Cu but not Mn form prevents free radical-induced neuronal death. The survival ratio of SH-SY5Y cells has been measured after UV irradiation (free radical production), when the incubating medium is supplemented with bovine brain homogenate in native, Cu or Mn forms. This ratio, about 28% without any addition or with bovine brain protein added in Mn form, increases by as much as 54.73% with addition to the culture medium of native bovine brain protein and by as much as 95.95% if the addition is carried out in cupric form. This protective effect of brain copper protein against free radical-induced neuronal death has been confirmed with Inductively Coupled Plasma Mass Spectrometry Mn and Cu measurement in bovine brain homogenates: respectively lower than detection limit and 9.01μg/g dry weight for native form; lower than detection limit and 825.85μg/g dry weight for Cu-supplemented form and 1.75 and 68.1μg/g dry weight in Mn-supplemented brain homogenate. Copyright © 2016 Elsevier GmbH. All rights reserved.

Telephone follow-up to a mail survey: when to offer an interview compared to a reminder call.

PubMed

Ziegenfuss, Jeanette Y; Burmeister, Kelly R; Harris, Ann; Holubar, Stefan D; Beebe, Timothy J

2012-03-20

Using a different mode of contact on the final follow-up to survey non-respondents is an identified strategy to increase response rates. This study was designed to determine if a reminder phone call or a phone interview as a final mode of contact to a mailed survey works better to increase response rates and which strategy is more cost effective. A randomized study was embedded within a survey study of individuals treated with ulcerative colitis conducted in March 2009 in Olmsted County, Minnesota. After two mail contacts, non-respondents were randomly assigned to either a reminder telephone call or a telephone interview. Average cost per completed interview and response rates were compared between the two experimental conditions. The response rate in the reminder group and the interview did not differ where we considered both a completed survey and a signed form a complete (24% vs. 29%, p = 0.08). However, if such a signed form was not required, there was a substantial advantage to completing the interview over the phone (24% vs. 43%, p < 0.0001). The reminder group on average cost $27.00 per completed survey, while the interview group on average cost $53.00 per completed survey when a signed form was required and $36.00 per complete when a signed form was not required. The additional cost of completing an interview is worth it when an additional signed form is not required of the respondent. However, when such a signed form is required, offering an interview instead of a reminder phone call as a follow up to non-respondents does not increase response rates enough to outweigh the additional costs.

Comparison between the effects of ultrasound and gamma-rays on the inactivation of Saccharomyces cerevisiae: analyses of cell membrane permeability and DNA or RNA synthesis by flow cytometry.

PubMed

Oyane, Ikuko; Takeda, Tomo; Oda, Yasunori; Sakata, Takashi; Furuta, Masakazu; Okitsu, Kenji; Maeda, Yasuaki; Nishimura, Rokuro

2009-04-01

The effects of 200 kHz ultrasonic irradiation on DNA or RNA formation and membrane permeability of yeast cells were investigated by flow cytometry and compared with those of (60)Co gamma-ray radiation. Colony counting analyses were also performed for comparison. It was observed that the colony-forming activity of yeast cells was not affected by small doses of ultrasonic irradiation, but was closely related to the amounts of sonolytically formed hydrogen peroxide at concentrations of more than 80 microM. On the other hand, gamma-rays directly retarded colony-forming ability in addition to the effects of radiolytically formed hydrogen peroxide. The results obtained by flow cytometry also indicated that the amounts of DNA or RNA formed decreased with an increase in ultrasonic irradiation time without any threshold. These results indicated that flow cytometry can show early growth activities, but that colony counting analyses are insufficient to evaluate continuous and quantitative changes in these activities. In addition, by analyzing the amounts of DNA or RNA formed in the presence of the same amount of hydrogen peroxide, it was found that DNA or RNA formation behavior in the presence of hydrogen peroxide with no irradiation was similar to that following ultrasonic irradiation. These results suggested that similar chemical effects due to the formation of hydrogen peroxide were produced during ultrasonic irradiation. In addition, physical effects of ultrasound, such as shock wave, hardly contributed to cell inactivation and cell membrane damage, because relatively high frequency ultrasound was used here. In the case of gamma-ray radiation, direct physical effects on the cells were clearly observed.

From consumption to harvest: Environmental fate prediction of excreted ionizable trace organic chemicals.

PubMed

Polesel, Fabio; Plósz, Benedek Gy; Trapp, Stefan

2015-11-01

Excreted trace organic chemicals, e.g., pharmaceuticals and biocides, typically undergo incomplete elimination in municipal wastewater treatment plants (WWTPs) and are released to surface water via treated effluents and to agricultural soils through sludge amendment and/or irrigation with freshwater or reclaimed wastewater. Recent research has shown the tendency for these substances to accumulate in food crops. In this study, we developed and applied a simulation tool to predict the fate of three ionizable trace chemicals (triclosan-TCS, furosemide-FUR, ciprofloxacin-CIP) from human consumption/excretion up to the accumulation in soil and plant, following field amendment with sewage sludge or irrigation with river water (assuming dilution of WWTP effluent). The simulation tool combines the SimpleTreat model modified for fate prediction of ionizable chemicals in a generic WWTP and a recently developed dynamic soil-plant uptake model. The simulation tool was tested using country-specific (e.g., consumption/emission rates, precipitation and temperature) input data. A Monte Carlo-based approach was adopted to account for the uncertainty associated to physico-chemical and biokinetic model parameters. Results obtained in this study suggest significant accumulation of TCS and CIP in sewage sludge (1.4-2.8 mg kgDW(-1)) as compared to FUR (0.02-0.11 mg kgDW(-1)). For the latter substance, more than half of the influent load (60.1%-72.5%) was estimated to be discharged via WWTP effluent. Specific emission rates (g ha(-1) a(-1)) of FUR to soil via either sludge application or irrigation were up to 300 times lower than for TCS and CIP. Nevertheless, high translocation potential to wheat was predicted for FUR, reaching concentrations up to 4.3 μg kgDW(-1) in grain. Irrigation was found to enhance the relative translocation of FUR to plant (45.3%-48.9% of emission to soil), as compared to sludge application (21.9%-27.6%). A comparison with peer-reviewed literature showed that model predictions were close to experimental data for elimination in WWTP, concentrations in sewage and sludge and bioconcentration factors (BCFs) in plant tissues, which showed however a large variability. The simulation tool presented here can thus be useful for priority setting and for the estimation of human exposure to trace chemicals via intake of food crops. Copyright © 2015 Elsevier Ltd. All rights reserved.

77 FR 56874 - Extension of Comment Period: Remedies for Small Copyright Claims: Additional Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-14

... (not a scanned document). The form and face of the comments must include both the name of the submitter..., it appears that some stakeholders may need additional time to respond. In order to facilitate full and adequate public comment, the Office hereby extends the time for filing additional comments to...

Effects of addition of supramolecular assembly on the anatase nanocrystalline precipitation of sol-gel derived SiO2-TiO2 coating films by hot-water treatment.

PubMed

Katagiri, Kiyofumi; Harada, Genki; Matsuda, Atsunori; Kogure, Toshihiro; Muto, Hiroyuki; Sakai, Mototsugu

2006-06-01

Effects of the addition of a supramolecular assembly of cetyltrimethylammonium bromide in SiO2-TiO2 gel films on the formation of anatase type TiO2 nanocrystals with hot-water treatment were investigated. Anatase nanocrystals were formed in the whole SiO2-TiO2 gel films with the addition of cetyltrimethylammonium bromide by the treatment, whereas the nanocrystals were formed only on the film surface in the case of gel films without cetyltrimethylammonium bromide. Cetyltrimethylammonium bromide molecules in the SiO2-TiO2 gel films were completely removed by the hot-water treatment and the following UV irradiation. In the usual procedure for preparation of porous materials, the removal of template molecular assemblies required high temperature treatment over 400 degrees C. In this system, all the processes were performed at temperatures less than 100 degrees C. Additionally, the porous structure produced by the removal of micellar assembly allowed anatase nanocrystals to be formed inside the films. Therefore, the method presented in this work provides us with the novel photocatalyst coatings of porous membrane with highly-dispersed TiO2 nanocrystals via low temperature process.

50 CFR 660.334 - Limited entry permits-endorsements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... status. (iii) After review of the evidence submitted under paragraph (ii), and any additional information... through review of the Identification of Ownership Interest Form that an individual person, partnership, or... discovers through review of the Identification of Ownership Interest Form that a partnership or corporation...

Influence of Nitrogen Source on NDMA Formation during Chlorination of Diuron

PubMed Central

Chen, Wei-Hsiang; Young, Thomas M.

2009-01-01

N-Nitrosodimethylamine (NDMA) is formed during chlorination of water containing the herbicide diuron (N′-(3,4-dichlorophenyl)-N, N-dimethylurea) but formation is greatly enhanced in the presence of ammonia (chloramination). Groundwater impacted by agricultural runoff may contain diuron and relatively high total nitrogen concentrations; this study examines the impact of the nitrogen form (ammonium, nitrite or nitrate) on NDMA formation during chlorination of such waters. NDMA formation during chlorination of diuron increased in the order nitrite < nitrate < ammonium for a given chlorine, nitrogen, and diuron dose. Formation of dichloramine seemed to fully explain enhanced NDMA formation in the presence of ammonium. Nitrate unexpectedly enhanced nitrosation of diuron derivatives to form NDMA compared to the cases of no added nitrogen or nitrite addition. Nitrite addition is less effective because it consumes more chlorine and produces intermediates that react rapidly with diuron and its aromatic byproducts. Differences between surface and groundwater in nitrogen forms and concentrations and disinfection approaches, suggest strategies to reduce NDMA formation should vary with drinking water source. PMID:19457535

Influence of nitrogen source on NDMA formation during chlorination of diuron.

PubMed

Chen, Wei-Hsiang; Young, Thomas M

2009-07-01

N-Nitrosodimethylamine (NDMA) is formed during chlorination of water containing the herbicide diuron (N'-(3,4-dichlorophenyl)-N,N-dimethylurea) but formation is greatly enhanced in the presence of ammonia (chloramination). Groundwater impacted by agricultural runoff may contain diuron and relatively high total nitrogen concentrations; this study examines the impact of the nitrogen form (ammonium, nitrite or nitrate) on NDMA formation during chlorination of such waters. NDMA formation during chlorination of diuron increased in the order nitrite

Mixed anhydrides (phosphoric-carboxyl) are also formed in the esterification of 5'-amp with n-acetylaminoacyl imidazolides - Implications regarding the origin of protein synthesis

NASA Technical Reports Server (NTRS)

Wickramasinghe, Nalinie S. M. D.; Lacey, James C., Jr.

1992-01-01

Procedure for the formation of aminoacyl esters of monoribonucleotides with aminoacyl imidazolides were first reported by Gottikh et al. (1970) and summarized in 1970. This reaction has been widely used by us and numbers of other workers as a convenient means of preparing aminoacyl esters of nucleotides. We have previously reported that, under conditions of excess imidazolide, large amounts of bis 2', 3' esters are formed in addition to the monoesters. However, to our knowledge, no one has reported that in addition to the esters, relatively large amounts of the mixed anhydride, with the amino acid carboxyl attached to the phosphate, are also formed at short reaction times. We report here on the relative amounts of anhydride and esters formed in this reaction of racemic mixtures of eleven N-acetyl amino acid imidazolides with 5'-AMP and discuss the relevance of the findings to the origin of protein synthesis.

Kinematic Methods of Designing Free Form Shells

NASA Astrophysics Data System (ADS)

Korotkiy, V. A.; Khmarova, L. I.

2017-11-01

The geometrical shell model is formed in light of the set requirements expressed through surface parameters. The shell is modelled using the kinematic method according to which the shell is formed as a continuous one-parameter set of curves. The authors offer a kinematic method based on the use of second-order curves with a variable eccentricity as a form-making element. Additional guiding ruled surfaces are used to control the designed surface form. The authors made a software application enabling to plot a second-order curve specified by a random set of five coplanar points and tangents.

The effect of yttrium and thorium on the oxidation behavior of Ni-Cr-Al alloys

NASA Technical Reports Server (NTRS)

Kumar, A.; Nasrallah, M.; Douglass, D. L.

1974-01-01

The effect of quaternary additions of 0.5% Y, 0.5 and 1.0% Th to a base alloy of Ni-10CR-5Al on the oxidation behavior and mechanism was studied during oxidation in air over the range of 1000 to 1200 C. The presence of yttrium decreased the oxidation kinetics slightly, whereas, the addition of thorium caused a slight increase. Oxide scale adherence was markedly improved by the addition of the quaternary elements. Although a number of oxides formed on yttrium containing alloys, quantitative X-ray diffraction clearly showed that the rate-controlling step was the diffusion of aluminum through short circuit paths in a thin layer of alumina that formed parabolically with time. Although the scale adherence of the yttrium containing alloy was considerably better than the base alloys, spalling did occur that was attributed to the formation of the voluminous YAG particles which grew in a mushroom-like manner, lifting the protective scale off the subrate locally. The YAG particles formed primarily at grain boundaries in the substrate in which the yttrium originally existed as YNi9.

Process for casting hard-faced, lightweight camshafts and other cylindrical products

DOEpatents

Hansen, Jeffrey S.; Turner, Paul C.; Argetsinger, Edward R.; Wilson, Rick D.

1996-01-01

A process for casting a hard-faced cylindrical product such as an automobile camshaft includes the steps of: (a) preparing a composition formed from a molten base metal and an additive in particle form and having a hardness value greater than the hardness value of the base metal; (b) introducing the composition into a flask containing a meltable pattern of a cylindrical product such as an automobile camshaft to be manufactured and encased in sand to allow the composition to melt the pattern and assume the shape of the pattern within the sand; and (c) rotating the flask containing the pattern about the longitudinal axes of both the flask and the pattern as the molten base metal containing the additive in particle form is introduced into the flask to cause particles of the additive entrained in the molten base metal to migrate by centrifugal action to the radial extremities of the pattern and thereby provide a cylindrical product having a hardness value greater at it's radial extremities than at its center when the molten base metal solidifies.

Cation-enhanced capillary electrophoresis separation of atropoisomer anions.

PubMed

Na, Yun-Cheol; Berthod, Alain; Armstrong, Daniel W

2015-12-01

CE was used to study the separation of the atropoisomers of four phosphoric acids and two sulfonic acids and the enantiomers of two phosphoric acids. All solutes are in their anionic forms in aqueous electrolytes. The chiral additives were two hydroxypropyl cyclodextrins (CDs) and cyclofructan 6 (CF6). The CDs were able to separate four solutes and the CF6 additive could separate only one: 1,1'-binaphthyl-2,2'-diyl hydrogenphosphate (BHP). Since CF6 is able to bind with cations, nitrate of alkaline metals, Ba(2+) , and Pb(2+) were added, greatly improving the BHP separation at the expense of longer migration times. There seems to be a link between CF6-cation-binding constants and BHP resolution factors. Cation additions were also performed with CD selectors that are less prone to form complexes with cations. Significant improvements of enantiomer or atropoisomer separations were observed also associated with longer migration times. It is speculated that the anionic solutes associate with the added cations forming larger entities better differentiated by CDs. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Method and apparatus for in situ determination of permeability and porosity

DOEpatents

Lagus, Peter L.; Peterson, Edward W.

1982-10-12

A method and apparatus for in situ measurement of flow characteristics in boreholes or the like is disclosed for determining various formation characteristics such as permeability, particularly in the range of approximately 100-1,000 microdarcies and lower. One embodiment of the method and apparatus contemplates formation of a test interval in the borehole by a pair of expandable packers, additional guard zones being formed in the borehole at either end of the test interval by two additional guard packers, suitable flow conditions being simultaneously and separately measured within the test interval and each of the guard zones in order to permit determination of multidirectional components of permeability, porosity and other characteristics of the particular formation. Another embodiment contemplates whole hole testing where similar data is developed for a test interval formed between a single packer and the end of the borehole and one guard zone formed by a single additional guard packer. The method and apparatus of this invention are particularly contemplated for obtaining unambiguous measurements of multidirectional flow in low permeability formations.

Allie: a database and a search service of abbreviations and long forms.

PubMed

Yamamoto, Yasunori; Yamaguchi, Atsuko; Bono, Hidemasa; Takagi, Toshihisa

2011-01-01

Many abbreviations are used in the literature especially in the life sciences, and polysemous abbreviations appear frequently, making it difficult to read and understand scientific papers that are outside of a reader's expertise. Thus, we have developed Allie, a database and a search service of abbreviations and their long forms (a.k.a. full forms or definitions). Allie searches for abbreviations and their corresponding long forms in a database that we have generated based on all titles and abstracts in MEDLINE. When a user query matches an abbreviation, Allie returns all potential long forms of the query along with their bibliographic data (i.e. title and publication year). In addition, for each candidate, co-occurring abbreviations and a research field in which it frequently appears in the MEDLINE data are displayed. This function helps users learn about the context in which an abbreviation appears. To deal with synonymous long forms, we use a dictionary called GENA that contains domain-specific terms such as gene, protein or disease names along with their synonymic information. Conceptually identical domain-specific terms are regarded as one term, and then conceptually identical abbreviation-long form pairs are grouped taking into account their appearance in MEDLINE. To keep up with new abbreviations that are continuously introduced, Allie has an automatic update system. In addition, the database of abbreviations and their long forms with their corresponding PubMed IDs is constructed and updated weekly. Database URL: The Allie service is available at http://allie.dbcls.jp/.

Cooperation of Doxycycline with Phytochemicals and Micronutrients Against Active and Persistent Forms of Borrelia sp.

PubMed

Goc, Anna; Niedzwiecki, Alexandra; Rath, Matthias

2016-01-01

Phytochemicals and micronutrients represent a growing theme in antimicrobial defense; however, little is known about their anti-borreliae effects of reciprocal cooperation with antibiotics. A better understanding of this aspect could advance our knowledge and help improve the efficacy of current approaches towards Borrelia sp. In this study, phytochemicals and micronutrients such as baicalein, luteolin, 10-HAD, iodine, rosmarinic acid, and monolaurin, as well as, vitamins D3 and C were tested in a combinations with doxycycline for their in vitro effectiveness against vegetative (spirochetes) and latent (rounded bodies, biofilm) forms of Borrelia burgdorferi and Borrelia garinii. Anti-borreliae effects were evaluated according to checkerboard assays and supported by statistical analysis. The results showed that combination of doxycycline with flavones such as baicalein and luteolin exhibited additive effects against all morphological forms of studied Borrelia sp. Doxycycline combined with iodine demonstrated additive effects against spirochetes and biofilm, whereas with fatty acids such as monolaurin and 10-HAD it produced FICIs of indifference. Additive anti-spirochetal effects were also observed when doxycycline was used with rosmarinic acid and both vitamins D3 and C. Antagonism was not observed in any of the cases. This data revealed the intrinsic anti-borreliae activity of doxycycline with tested phytochemicals and micronutrients indicating that their addition may enhance efficacy of this antibiotic in combating Borrelia sp. Especially the addition of flavones balcalein and luteolin to a doxycycline regimen could be explored further in defining more effective treatments against these bacteria.

21 CFR 172.870 - Hydroxypropyl cellulose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... per anhydroglucose unit. The common name for this form of the additive is low substituted... colloid, stabilizer, suspending agent, or thickener, in accordance with good manufacturing practice. (2... additive is used in accordance with good manufacturing practice. [46 FR 50065, Oct. 9, 1981] ...

The Influence of Sintering Method on Kaolin-Based Geopolymer Ceramics with Addition of Ultra High Molecular Weight Polyethylene as Binder

NASA Astrophysics Data System (ADS)

Romisuhani, A.; AlBakri, M. M.; Kamarudin, H.; Andrei, S. V.

2017-11-01

The influence of sintering method on kaolin-based geopolymer ceramics with addition of Ultra High Molecular Weight Polyethylene as binder were studied. Geopolymer were formed at room temperature from kaolin and sodium silicate in a highly alkaline medium, followed by curing and drying at 80 °C. 12 M of sodium hydroxide solution were mixed with sodium silicate at a ratio of 0.24 to form alkaline activator. Powder metallurgy technique were used in order to produce kaolin geopolymer ceramics with addition of Ultra High Molecular Weight Polyethylene. The samples were heated at temperature of 1200 °C with two different sintering method which are conventional method and two-step sintering method. The strength and density were tested.

Differential thermal analysis of lunar soil simulant

NASA Technical Reports Server (NTRS)

Tucker, D.; Setzer, A.

1991-01-01

Differential thermal analysis of a lunar soil simulant, 'Minnesota Lunar Simulant-1' (MLS-1) was performed. The MLS-1 was tested in as-received form (in glass form) and with another silica. The silica addition was seen to depress nucleation events which lead to a better glass former.

Chemically bonded phosphate ceramics of trivalent oxides of iron and manganese

DOEpatents

Wagh, Arun S.; Jeong, Seung-Young

2002-01-01

A new method for combining elemental iron and other metals to form an inexpensive ceramic to stabilize arsenic, alkaline red mud wastes, swarfs, and other iron or metal-based additives, to create products and waste forms which can be poured or dye cast.

77 FR 15115 - Agency Information Collection Activities: Extension, without Change, of an Existing Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

..., mechanical, or other technological collection techniques or other forms of information technology, e.g...; or inquiries for additional information should be directed to: John Ramsay, Forms Program Manager, U... Information Collection Activities: Extension, without Change, of an Existing Information Collection; Comment...

The effects of CO2 on the negative reactant ions of IMS

NASA Technical Reports Server (NTRS)

Spangler, Glenn E.

1995-01-01

In the presence of CO2, the negative reactant ions of ion mobility spectrometry (IMS) are ion clusters of CO4(-) and CO3(-). Methyl salicylate is ionized by the CO4(-)(H2O(n))(N2(m)) reactant ions, but not by the CO3(-)(H2O(n))(N2(m)) reactant ions. While the CO4(-) ions are formed by direct association, the CO3(-) ions require additional energy to be formed. The additional energy is provided by either excited neutral gas molecules in a metastable state or UV (ultraviolet) radiation.

MOF-253-Pd(OAc) 2 : a recyclable MOF for transition-metal catalysis in water

DOE PAGES

Van Zeeland, Ryan; Li, Xinle; Huang, Wenyu; ...

2016-06-06

We report palladium(II)-functionalized MOF-253 (MOF-253-Pd(OAc) 2) as a recyclable catalyst to form all-carbon quaternary centers via conjugate additions of arylboronic acids to β,β-disubstituted enones in aqueous media. We demonstrate MOF-253-Pd(OAc) 2 can be reused 8 times to form ketone products in yields above 75% while maintaining its crystallinity. Additions of a range of stereoelectronically diverse arylboronic acids to a variety of β,β-disubstituted enones catalyzed by MOF-253-Pd(OAc) 2 occur in modest-to-high yields (34–95%).

78 FR 40260 - Self-Regulatory Organizations; New York Stock Exchange LLC; Notice of Designation of a Longer...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-03

... Various Forms of Agreements That Are in the Manual, as Well as Some Additional New Rules That Make... in the Manual, as well as some additional new rules that make explicit existing Exchange policies... agreements that are in the Manual, as well as some additional new rules that make explicit existing Exchange...

Structuring in Cement Systems with Introduction of Graphene Nano-Additives

NASA Astrophysics Data System (ADS)

Yanturina, R. A.; Trofimov, B. Ya; Ahmedjanov, R. M.

2017-11-01

At present, one of the most promising areas in the field of concrete research is the study of the effect of nano-additives for the production of highly effective concretes. Many authors have already obtained primary results which testify to the very effective role of nanoadditives based on carbon in modifying concrete. In this paper, the influence of a nano-additive of graphene on the phase composition and microstructure of the cement stone was studied. It has been found that, when a nano-additive of graphene is introduced, low-basic calcium hydrosilicates are mainly formed. This leads to an increase in the compressive strength of concrete. The results of the study of the microstructure of cement stone with nano-additive graphene showed that the high compressive strength of concrete modified with nano-additive graphene is explained by the cement stone dense structure. Thus, it was found that the nanoadditive of graphene contributes to the formation of a dense structure of cement stone, composed mainly of low-basic calcium hydrosilicates, and due to this, the physical and mechanical characteristics of concrete and its resistance to frost and other forms of aggression.

Microbial strengthening of loose sand.

PubMed

Banagan, B L; Wertheim, B M; Roth, M J S; Caslake, L F

2010-08-01

To test whether the addition of Flavobacterium johnsoniae could increase the strength of saturated Ottawa 30 sand. A box model was built that simulates groundwater-like flow through a main sand compartment. Strength tests were performed at seven locations and at two depths, 10.8 and 20.3 cm below the top of the tank, using a vane shear device before and after the addition of bacteria. After the addition of Fl. johnsoniae, sand samples were obtained from multiple sampling ports on the vertical sides of the box model. The presence of a bacterial biofilm was confirmed by staining these sand samples with SYTO-9 and Alexa Fluor 633 and viewing with a confocal microscope. The average shear strength increases after the addition of Fl. johnsoniae were 15.2-87.5%, depending on the experimental conditions. Flavobacterium johnsoniae caused a statistically significant increase in the strength of saturated Ottawa 30 sand. Biofilm-forming bacteria can increase the shear strength of saturated sand. The addition of biofilm-forming bacteria to a building site may be an alternate method to mitigate the effects of liquefaction.

21 CFR 1304.04 - Maintenance of records and inventories.

Code of Federal Regulations, 2011 CFR

2011-04-01

... manual, or computer readable, form. (2) A registered retail pharmacy that possesses additional... this part for those additional registered sites at the retail pharmacy or other approved central...) Each registered pharmacy shall maintain the inventories and records of controlled substances as follows...

21 CFR 1304.04 - Maintenance of records and inventories.

Code of Federal Regulations, 2013 CFR

2013-04-01

... manual, or computer readable, form. (2) A registered retail pharmacy that possesses additional... this part for those additional registered sites at the retail pharmacy or other approved central...) Each registered pharmacy shall maintain the inventories and records of controlled substances as follows...

21 CFR 1304.04 - Maintenance of records and inventories.

Code of Federal Regulations, 2014 CFR

2014-04-01

... manual, or computer readable, form. (2) A registered retail pharmacy that possesses additional... this part for those additional registered sites at the retail pharmacy or other approved central...) Each registered pharmacy shall maintain the inventories and records of controlled substances as follows...

21 CFR 1304.04 - Maintenance of records and inventories.

Code of Federal Regulations, 2012 CFR

2012-04-01

... manual, or computer readable, form. (2) A registered retail pharmacy that possesses additional... this part for those additional registered sites at the retail pharmacy or other approved central...) Each registered pharmacy shall maintain the inventories and records of controlled substances as follows...

[Preparing oral dosage form of ketamine in the hospital for simplicity and patient compliance--preparations using agar].

PubMed

Kaneuchi, Miki; Kohri, Naonori; Senbongi, Kaname; Sakai, Hideo; Iseki, Ken

2005-02-01

Ketamine has been widely used in the operation as intravenous and intramuscular injections, since ketamine has dissociative anesthetic properties. When it is given in sub-anesthetic dose, ketamine is known to have an analgesic effect. The analgesic effect is observed for patients with neuropathic pain when administrated not only by injection but also orally. In Japan, since ketamine is not commercially available except injection forms, patients have to take it as solution of injections for the oral medication. Since the solution of injections has extremely bitter taste, patients intensely desire the development of preparations without the bitterness. In the present study, we prepared oral gel dosage forms of ketamine using agar. It is simple to prepare this dosage form, and most pharmacists can prepare it easily in many hospitals. This gel dosage form met content uniformity requirements and the shape of that was maintained intact during the dissolution test (for 10 hours). The release rate was reduced by additions of additives such as sugar and a flavor in the gel. The reason for the reduction in release could be the suppression of ketamine diffusion depended on the micro-viscosity of solution in the gel. The ketamine contents and the release profile of the gel preparations were unchanged at the room temperature for 12-week storage. The gel preparations in this study would be useful for the oral medication of ketamine, since it is easy for patients to carry them when they go out and the intensely bitter taste could be improved by the addition of a flavor.

Comparison of the effect of NaOH and TE buffer on 25 to 100 eV electron induced damage to ΦX174 dsDNA

NASA Astrophysics Data System (ADS)

Kumar, S. V. K.; Murali, Megha; Kushwaha, Preksha

2015-09-01

In this article we report the usage of (1) ΦX174 dsDNA as a model for electron - DNA interaction studies, (2) semiconductor grade 100 silicon wafer, gold on chrome on glass, and tantalum foil substrates, drying process and effect of temperature, on the DNA film formation and its stability, (3) stability of DNA films formed from DNA suspended in nano pure water and with additives like NaOH and TE buffer, and (4) effect of 0.001 mM NaOH and TE buffer (at pH 7.5) additives on DNA damage induced by 25 to 100 eV electrons. The results show that when tantalum foils are used as a substrate, it results in films, which have DNA distributed fairly uniformly and is also stable against strand breaks affected due to the stress of the drying. Electron irradiation of DNA suspended in TE buffer result in the formation of only relaxed form. When the DNA is suspended in 0.001 mM NaOH and irradiated similarly, linear form and cross links are also formed, in addition to relaxed form. This could be likely due to the secondary electrons interacting with Na+ ions that are bound to the DNA causing a second strand break in the opposite strand. Contribution to the Topical Issue "COST Action Nano-IBCT: Nano-scale Processes Behind Ion-Beam Cancer Therapy", edited by Andrey Solov'yov, Nigel Mason, Gustavo García, Eugene Surdutovich.

Preliminary fabrication and characterization of electron beam melted Ti-6Al-4V customized dental implant.

PubMed

Ramakrishnaiah, Ravikumar; Al Kheraif, Abdulaziz Abdullah; Mohammad, Ashfaq; Divakar, Darshan Devang; Kotha, Sunil Babu; Celur, Sree Lalita; Hashem, Mohamed I; Vallittu, Pekka K; Rehman, Ihtesham Ur

2017-05-01

The current study was aimed to fabricate customized root form dental implant using additive manufacturing technique for the replacement of missing teeth. The root form dental implant was designed using Geomagic™ and Magics™, the designed implant was directly manufactured by layering technique using ARCAM A2™ electron beam melting system by employing medical grade Ti-6Al-4V alloy powder. Furthermore, the fabricated implant was characterized in terms of certain clinically important parameters such as surface microstructure, surface topography, chemical purity and internal porosity. Results confirmed that, fabrication of customized dental implants using additive rapid manufacturing technology offers an attractive method to produce extremely pure form of customized titanium dental implants, the rough and porous surface texture obtained is expected to provide better initial implant stabilization and superior osseointegration.

Antisolvent precipitation of novel xylitol-additive crystals to engineer tablets with improved pharmaceutical performance.

PubMed

Kaialy, Waseem; Maniruzzaman, Mohammad; Shojaee, Saeed; Nokhodchi, Ali

2014-12-30

The purpose of this work was to develop stable xylitol particles with modified physical properties, improved compactibility and enhanced pharmaceutical performance without altering polymorphic form of xylitol. Xylitol was crystallized using antisolvent crystallization technique in the presence of various hydrophilic polymer additives, i.e., polyethylene glycol (PEG), polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA) at a range of concentrations. The crystallization process did not influence the stable polymorphic form or true density of xylitol. However, botryoidal-shaped crystallized xylitols demonstrated different particle morphologies and lower powder bulk and tap densities in comparison to subangular-shaped commercial xylitol. Xylitol crystallized without additive and xylitol crystallized in the presence of PVP or PVA demonstrated significant improvement in hardness of directly compressed tablets; however, such improvement was observed to lesser extent for xylitol crystallized in the presence of PEG. Crystallized xylitols produced enhanced dissolution profiles for indomethacin in comparison to original xylitol. The influence of additive concentration on tablet hardness was dependent on the type of additive, whereas an increased concentration of all additives provided an improvement in the dissolution behavior of indomethacin. Antisolvent crystallization using judiciously selected type and concentration of additive can be a potential approach to prepare xylitol powders with promising physicomechanical and pharmaceutical properties. Copyright © 2014 Elsevier B.V. All rights reserved.

Epsilon metal waste form for immobilization of noble metals from used nuclear fuel

NASA Astrophysics Data System (ADS)

Crum, Jarrod V.; Strachan, Denis; Rohatgi, Aashish; Zumhoff, Mac

2013-10-01

Epsilon metal (ɛ-metal), an alloy of Mo, Pd, Rh, Ru, and Tc, is being developed as a waste form to treat and immobilize the undissolved solids and dissolved noble metals from aqueous reprocessing of commercial used nuclear fuel. Epsilon metal is an attractive waste form for several reasons: increased durability relative to borosilicate glass, it can be fabricated without additives (100% waste loading), and in addition it also benefits borosilicate glass waste loading by eliminating noble metals from the glass, thus the processing problems related to their insolubility in glass. This work focused on the processing aspects of the epsilon metal waste form development. Epsilon metal is comprised of refractory metals resulting in high alloying temperatures, expected to be 1500-2000 °C, making it a non-trivial phase to fabricate by traditional methods. Three commercially available advanced technologies were identified: spark-plasma sintering, microwave sintering, and hot isostatic pressing, and investigated as potential methods to fabricate this waste form. Results of these investigations are reported and compared in terms of bulk density, phase assemblage (X-ray diffraction and elemental analysis), and microstructure (scanning electron microscopy).

Multivoxel patterns in face-sensitive temporal regions reveal an encoding schema based on detecting life in a face.

PubMed

Looser, Christine E; Guntupalli, Jyothi S; Wheatley, Thalia

2013-10-01

More than a decade of research has demonstrated that faces evoke prioritized processing in a 'core face network' of three brain regions. However, whether these regions prioritize the detection of global facial form (shared by humans and mannequins) or the detection of life in a face has remained unclear. Here, we dissociate form-based and animacy-based encoding of faces by using animate and inanimate faces with human form (humans, mannequins) and dog form (real dogs, toy dogs). We used multivariate pattern analysis of BOLD responses to uncover the representational similarity space for each area in the core face network. Here, we show that only responses in the inferior occipital gyrus are organized by global facial form alone (human vs dog) while animacy becomes an additional organizational priority in later face-processing regions: the lateral fusiform gyri (latFG) and right superior temporal sulcus. Additionally, patterns evoked by human faces were maximally distinct from all other face categories in the latFG and parts of the extended face perception system. These results suggest that once a face configuration is perceived, faces are further scrutinized for whether the face is alive and worthy of social cognitive resources.

Hydroxy acetone and lactic acid synthesis from aqueous propylene glycol/hydrogen peroxide catalysis on Pd-black

DOE Office of Scientific and Technical Information (OSTI.GOV)

Disselkamp, Robert S.; Harris, Benjamin D.; Hart, Todd R.

2008-07-20

The production of polyol chemicals is of increasing interest as they are obtained from the catalytic processing of biological feedstock materials, which also is becoming more prevalent. A case in point is glycerol production, formed as a byproduct in biodiesel catalytic processing. Here we report the reaction of a simple 1,2-diol, propylene glycol, with hydrogen peroxide and a Pd-black catalyst under reflux conditions at 368 K. The experiments were performed by either co-addition of hydrogen peroxide with air sparging, or addition of hydrogen peroxide alone, each yielding hydroxy acetone (HA) and acetic acid (AA) products, with a lesser amount ofmore » lactic acid (LA) formed. Product conversion data at near neutral pH versus hydrogen peroxide equivalents added relative to substrate is presented. Hydrogen peroxide addition without air sparging at 5 equivalents resulted in 65% conversion with an HA:AA molar ratio of 2:1. Conversely, hydrogen peroxide addition with air sparging at only 0.75 equivalents resulted in 40% conversion with an HA:AA ratio of 3:1. From this it is concluded that although the product distribution in these chemistries is somewhat unchanged by air sparging, it is surprising that the amount of reactive oxygen is greatly enhanced with co-addition of O2/H2O2. Additional studies have revealed the amount of LA formed can be enhanced under acidic conditions (pH=1.5 compared to pH=8.5), such that 26% of total product formation is LA. Since hydrogen peroxide is an environmentally clean reagent and becoming more cost effective to use, this work may guide future applied investigations into polyol chemical syntheses.« less

76 FR 18301 - Proposed Collection; Comment Request for HCTC Program Forms

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... requests of; changes to their account information, waivers from the Federal requirement that mandates all... on proposed and/or continuing information collections, as required by the Paperwork Reduction Act of... INFORMATION CONTACT: Requests for additional information or copies of the form and instructions should be...

77 FR 38144 - Proposed Collection; Comment Request for Form 8594

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-26

... information technology; and (e) estimates of capital or start-up costs and costs of operation, maintenance... proposed and/or continuing information collections, as required by the Paperwork Reduction Act of 1995... INFORMATION CONTACT: Requests for additional information or copies of the form and instructions should be...

75 FR 39092 - Proposed Collection; Comment Request for Form 8655

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-07

... deposits. This form allows IRS to disclose tax account information and to provide duplicate copies of... proposed and/or continuing information collections, as required by the Paperwork Reduction Act of 1995...., Washington, DC 20224. FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the...

Proton and neutron electromagnetic form factors and uncertainties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ye, Zhihong; Arrington, John; Hill, Richard J.

We determine the nucleon electromagnetic form factors and their uncertainties from world electron scattering data. The analysis incorporates two-photon exchange corrections, constraints on the low-Q 2 and high-Q 2 behavior, and additional uncertainties to account for tensions between different data sets and uncertainties in radiative corrections.

Proton and neutron electromagnetic form factors and uncertainties

DOE PAGES

Ye, Zhihong; Arrington, John; Hill, Richard J.; ...

2017-12-06

We determine the nucleon electromagnetic form factors and their uncertainties from world electron scattering data. The analysis incorporates two-photon exchange corrections, constraints on the low-Q 2 and high-Q 2 behavior, and additional uncertainties to account for tensions between different data sets and uncertainties in radiative corrections.

Space station needs, attributes and architectural options study

NASA Technical Reports Server (NTRS)

1983-01-01

All the candidate Technology Development missions investigated during the space station needs, attributes, and architectural options study are described. All the mission data forms plus additional information such as, cost, drawings, functional flows, etc., generated in support of these mission is included with a computer generated mission data form.

Assessing "Combining Forms" in Science.

ERIC Educational Resources Information Center

Floriani, Bernard P.; Cairns, Jack C.

1982-01-01

Since there appears to be a direct relationship between reading comprehension and vocabulary, an inventory is offered which assesses students' knowledge of the meaning of "combining forms" (automobile, aero-dynamics, etc.) and not words themselves. The inventory can serve as a model to develop additional inventories for Latin/Greek roots.…

8 CFR 210.2 - Application for temporary resident status.

Code of Federal Regulations, 2014 CFR

2014-01-01

... years or older, the application must be accompanied by a completed Form FD-258 (Fingerprint Card). (ii... applicant shall proceed to a legalization office for presentation or completion of Form FD-258 (Fingerprint... certificate accompanied by additional evidence of identity bearing a photograph and/or fingerprint of the...

8 CFR 210.2 - Application for temporary resident status.

Code of Federal Regulations, 2013 CFR

2013-01-01

... years or older, the application must be accompanied by a completed Form FD-258 (Fingerprint Card). (ii... applicant shall proceed to a legalization office for presentation or completion of Form FD-258 (Fingerprint... certificate accompanied by additional evidence of identity bearing a photograph and/or fingerprint of the...

8 CFR 210.2 - Application for temporary resident status.

Code of Federal Regulations, 2012 CFR

2012-01-01

... years or older, the application must be accompanied by a completed Form FD-258 (Fingerprint Card). (ii... applicant shall proceed to a legalization office for presentation or completion of Form FD-258 (Fingerprint... certificate accompanied by additional evidence of identity bearing a photograph and/or fingerprint of the...

School Counselor Involvement in Partnerships with Families of Color: A Social Cognitive Perspective

ERIC Educational Resources Information Center

Harris, Pamela Nadine

2016-01-01

School-family partnerships facilitate the academic and personal success of all students. Whereas forming these partnerships are a component of school counselor identity, school counselors are commonly unprepared to form and maintain such relationships. Additionally, shifting racial demographics within K-12 schools call for culturally responsive…

77 FR 60022 - Proposed Collection; Comment Request for Information Collection Tools

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-01

... Information Collection Tools AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and request for... C (Form 1040), Profit or Loss From Business; Form 8907, Nonconventional Source Fuel Credit; and REG... CONTACT: Requests for additional information or copies of the collection tools should be directed to R...

Methods of forming hardened surfaces

DOEpatents

Branagan, Daniel J [Iona, ID

2004-07-27

The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

Tandem nucleophilic addition-Oppenauer oxidation of aromatic aldehydes to aryl ketones with triorganoaluminium reagents.

PubMed

Fu, Ying; Yang, Yanshou; Hügel, Helmut M; Du, Zhengyin; Wang, Kehu; Huang, Danfeng; Hu, Yulai

2013-07-21

In the presence of pinacolone, the in situ prepared triorganoaluminium reagents reacted with aromatic aldehydes to give ketones in moderate to high yield. We propose that the products are formed via a tandem organoaluminium reagents addition-Oppenauer oxidation sequence.

Suppression of Dendritic Lithium Growth by in Situ Formation of a Chemically Stable and Mechanically Strong Solid Electrolyte Interphase.

PubMed

Wan, Guojia; Guo, Feihu; Li, Hui; Cao, Yuliang; Ai, Xinping; Qian, Jiangfeng; Li, Yangxing; Yang, Hanxi

2018-01-10

The growth and proliferation of Li dendrites during repeated Li cycling has long been a crucial issue that hinders the development of secondary Li-metal batteries. Building a stable and robust solid state electrolyte interphase (SEI) on the Li-anode surface is regarded as a promising strategy to overcome the dendrite issues. In this work, we report a simple strategy to engineer the interface chemistry of Li-metal anodes by using tiny amounts of dimethyl sulfate (DMS, C 2 H 6 SO 4 ) as the SEI-forming additive. With the preferential reduction of DMS, an SEI layer composed of Li 2 S/Li 2 O forms on the Li surface. This inorganic SEI layer features high structural modulus and low interfacial resistant, enabling a dense and dendrite-free Li deposition as evidenced by scanning electron microscopy, atomic force microscopy, and in situ optical images. In addition, this SEI layer can prevent the deposited Li from direct contact with corrosive electrolytes, thus rendering an improved cycling stability of Li anodes with an average Coulombic efficiency of 97% for up to 150 cycles. When the DMS additive is introduced into a Li/NCM full cell, the cycle life of Li-metal batteries can be also improved significantly. This work demonstrates a feasible route to suppress Li dendrite growth by designing appropriate film-forming additives to regulate the interfacial properties of the SEI layer, and also the sulfonyl-based derivatives revealed in this work represent a large variety of new film-forming molecules, providing a broad selectivity for constructing high efficiency and cycle-stable Li anodes to address the intrinsic problems of rechargeable Li-metal batteries.

Biosynthetic maturation of an ascites tumor cell surface sialomucin. Evidence for O-glycosylation of cell surface glycoprotein by the addition of new oligosaccharides during recycling.

PubMed

Hull, S R; Sugarman, E D; Spielman, J; Carraway, K L

1991-07-25

Previous biosynthetic studies of the ascites 13762 rat mammary adenocarcinoma cell surface sialomucin ASGP-1 (ascites sialoglycoprotein-1) showed that it is synthesized initially as a poorly glycosylated immature form, which is converted to a larger premature form (t1/2 30 min) and more slowly to the mature glycoprotein (t1/2 greater than 4 h). In the present study O-glycosylation of ASGP-1 polypeptide is shown to occur in two phases: an early phase complete in less than 30 min, which corresponds to the synthesis of the premature form, and a later phase that continues for hours and corresponds to the synthesis of the mature form. Pulse-chase labeling studies indicate that 95% of the ASGP-1 has moved to the cell surface in 2 h. Since transit to the cell surface is faster than the slow phase of addition of new oligosaccharides, some new oligosaccharides must be added after ASGP-1 has reached the cell surface. Initiation of new oligosaccharides on cell surface ASGP-1 was demonstrated directly using a biotinylation procedure to identify cell surface molecules. Glucosamine labeling of biotinylated ASGP-1 was shown to occur on galactosamine residues, which are linked to the polypeptide, establishing the addition of new oligosaccharides to the cell surface molecules. Finally, resialylation studies indicate that ASGP-1 rapidly recycles through a sialylating compartment. From these results we propose that ASGP-1 reaches the cell surface in an incompletely glycosylated state and that additional oligosaccharides are added to the glycoprotein in a second process involving recycling.

Hybrid colored noise process with space-dependent switching rates

NASA Astrophysics Data System (ADS)

Bressloff, Paul C.; Lawley, Sean D.

2017-07-01

A fundamental issue in the theory of continuous stochastic process is the interpretation of multiplicative white noise, which is often referred to as the Itô-Stratonovich dilemma. From a physical perspective, this reflects the need to introduce additional constraints in order to specify the nature of the noise, whereas from a mathematical perspective it reflects an ambiguity in the formulation of stochastic differential equations (SDEs). Recently, we have identified a mechanism for obtaining an Itô SDE based on a form of temporal disorder. Motivated by switching processes in molecular biology, we considered a Brownian particle that randomly switches between two distinct conformational states with different diffusivities. In each state, the particle undergoes normal diffusion (additive noise) so there is no ambiguity in the interpretation of the noise. However, if the switching rates depend on position, then in the fast switching limit one obtains Brownian motion with a space-dependent diffusivity of the Itô form. In this paper, we extend our theory to include colored additive noise. We show that the nature of the effective multiplicative noise process obtained by taking both the white-noise limit (κ →0 ) and fast switching limit (ɛ →0 ) depends on the order the two limits are taken. If the white-noise limit is taken first, then we obtain Itô, and if the fast switching limit is taken first, then we obtain Stratonovich. Moreover, the form of the effective diffusion coefficient differs in the two cases. The latter result holds even in the case of space-independent transition rates, where one obtains additive noise processes with different diffusion coefficients. Finally, we show that yet another form of multiplicative noise is obtained in the simultaneous limit ɛ ,κ →0 with ɛ /κ2 fixed.

Incorporation of additives into polymers

DOEpatents

McCleskey, T. Mark; Yates, Matthew Z.

2003-07-29

There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

Effects of Different Barium Compounds on the Corrosion Resistance of Andalusite-Based Low-Cement Castables in Contact with Molten Al-Alloy

NASA Astrophysics Data System (ADS)

Adabifiroozjaei, Esmaeil; Koshy, Pramod; Rastkerdar, Ebad

2011-08-01

An experimental study was conducted to investigate the interfacial phenomena between an Al alloy and andalusite low-cement castables (LCCs) containing fixed contents of barium compounds (BaO, BaSO4, and BaCO3) at 1123 K and 1433 K (850 °C and 1160 °C) using the Alcoa cup test. Interfacial reaction products and phases formed during heat treatment of the refractory samples were characterized using scanning electron microscopy (SEM) coupled with energy dispersive spectrometry (EDS) and X-ray diffraction analysis (XRD). The addition of both BaO and BaSO4 led to a significant reduction of alloy penetration into the refractory. Hexa-celsian formation was observed in both these refractories, which drastically increased their corrosion resistance. Barite decomposition was observed at 1373 K (1100 °C) in the presence of alumina and silica, which was the precursor for hexa-celsian formation. Barium silicates were formed in all samples containing additives; however, this did not have any major influence on the corrosion resistance. Solidified eutectics of BaSi2 and α-BaAl2Si2 formed in all these samples, which acted as an interfacial barrier that prevented additional molten aluminum penetration; however, the positive effect of intermetallic formation was offset by glassy phase formation in samples containing BaCO3 as the additive.

Low-Temperature Sintering of AlN Ceramics by Sm2O3-Y2O3-CaO Sintering Additives Formed via Decomposition of Nitrate Solutions

NASA Astrophysics Data System (ADS)

Zhan, Jun; Cao, Ye; Zhang, Hao; Guo, Jun; Zhang, Jianhua; Geng, Chunlei; Shi, Changdong; Cui, Song; Tang, Wenming

2017-01-01

The Sm, Y and Ca anhydrous nitrates were mixed with the AlN powder in ethanol and then decomposed into the Sm2O3-Y2O3-CaO sintering additives via calcining. Low-temperature sintering of the AlN ceramics was carried out at temperature range from 1675 to 1750 °C. Effects of the composition and adding amount of the sintering additives on the phases, microstructures and properties of the AlN ceramics were investigated. During sintering the AlN ceramics, main secondary phases of CaYAl3O7 and CaSmAl3O7 form. The relative density, bending strength and thermal conductivity of the AlN ceramics increase with the increase in the rare-earth oxides in them. The thermal conductivity of the sintered AlN ceramics is also greatly affected by the distribution of the secondary phases. As sintered at 1750 °C, the AlN ceramics by adding the sintering additives of 2 wt.% Sm2O3, 2 wt.% Y2O3 and 1 wt.% CaO formed via decomposition of their nitrates is fully dense and have the optimal bending strength and thermal conductivity of 402.1 MPa and 153.7 W/(m K), respectively.

Effects of CH3OH Addition on Plasma Electrolytic Oxidation of AZ31 Magnesium Alloys

NASA Astrophysics Data System (ADS)

He, Yongyi; Chen, Li; Yan, Zongcheng; Zhang, Yalei

2015-09-01

Plasma electrolytic oxidation (PEO) films on AZ31 magnesium alloys were prepared in alkaline silicate electrolytes (base electrolyte) with the addition of different volume concentrations of CH3OH, which was used to adjust the thickness of the vapor sheath. The compositions, morphologies, and thicknesses of ceramic layers formed with different CH3OH concentrations were determined via X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), and scanning electron microscopy (SEM). Corrosion behavior of the oxide films was evaluated in 3.5 wt.% NaCl solution using potentiodynamic polarization tests. PEO coatings mainly comprised Mg, MgO, and Mg2SiO4. The addition of CH3OH in base electrolytes affected the thickness, pores diameter, and Mg2SiO4 content in the films. The films formed in the electrolyte containing 12% CH3OH exhibited the highest thickness. The coatings formed in the electrolyte containing different concentrations of CH3OH exhibited similar corrosion resistance. The energy consumption of PEO markedly decreased upon the addition of CH3OH to the electrolytes. The result is helpful for energy saving in the PEO process. supported by National Natural Science Foundation of China (No. 21376088), the Project of Production, Education and Research, Guangdong Province and Ministry of Education (Nos. 2012B09100063, 2012A090300015), and Guangzhou Science and Technology Plan Projects of China (No. 2014Y2-00042)

Atmospheric oxidation mechanism of chlorobenzene.

PubMed

Wu, Runrun; Wang, Sainan; Wang, Liming

2014-09-01

The atmospheric oxidation mechanism of chlorobenzene (CB) initiated by the OH radicals is investigated at M06-2X/6-311++G(2df, 2p) and ROCBS-QB3 levels. The oxidation is initiated by OH addition to the ortho (∼50%), para (∼33%) and meta (∼17%) positions, forming CB-OH adducts as R2, R3, and R4; while the ipso-addition is negligible (∼0.2%). The reactions of the CB-OH adducts with the atmospheric oxygen are further investigated in detail by coupling the unimolecular reaction rate theory calculations with master-equation (RRKM-ME). The CB-OH adducts react with O2 either by irreversible H-abstraction to form chlorophenol and HO2 or by reversible additions to form CB-OH-O2 radicals, which subsequently cyclize to bicyclic radicals. RRKM-ME calculations show that the addition reactions of CB-OH and O2 at the atmospheric pressure are close to but not yet reach their high-pressure-limits. The RRKM-ME simulations predict the yields of 93%, 38%, and 74% for ortho-, meta- and para-chlorophenols from the reactions of O2 with R2, R3 and R4, being lower than their high-pressure-limit yields of 95%, 48%, an 80%, respectively. Overall, the yield of chlorophenols is determined as 72% at the atmospheric pressure. Copyright © 2014 Elsevier Ltd. All rights reserved.

The extension of a DNA double helix by an additional Watson-Crick base pair on the same backbone.

PubMed

Kumar, Pawan; Sharma, Pawan K; Madsen, Charlotte S; Petersen, Michael; Nielsen, Poul

2013-06-17

Additional base pair: The DNA duplex can be extended with an additional Watson-Crick base pair on the same backbone by the use of double-headed nucleotides. These also work as compressed dinucleotides and form two base pairs with cognate nucleobases on the opposite strand. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Performance Characterization of Polyimide-Carbon Fiber Composites for Future Hypersonic Vehicles

DTIC Science & Technology

2010-08-01

already being processed for leading edge primary structures and engine components for present and future stealth aircraft. In addition to describing our...The form of entry is the last name, first name, middle initial, and additional qualifiers separated by commas, e.g. Smith, Richard, Jr. 7...availability or distribution limitations of the report. If additional limitations/restrictions or special markings are indicated, follow agency

Effectiveness of oil-soluble corrosion inhibitors during corrosion-mechanical breakdown in acid and neutral media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kardash, N.V.; Egorov, V.V.; Forman, A.Y.

1986-11-01

The purpose of the present study is to ascertain the effectiveness of familiar additives and oil-soluble inhibitors under conditions of acid corrosion in comparison with their rapid action and waterreplacement efficiency, and the capacity to inhibit an electrolyte that forms in the oils, to protect against electrochemical corrosion, especially from pitting, and to reduce the mechanical-corrosion forms of wear. Characteristics of several oil-soluble corrosion inhibitors and the effectiveness of the oil-soluble inhibitors are shown. The additives M, ALOP, and MONIKA are most effective under fretting-corrosion conditions. It is shown that only the combined additives and compositions that provide for metalmore » protection in both acid and neutral media are sufficiently effective in preventing corrosion cracking, fatigue, corrosion fatigue and corrosion fretting.« less

A first principles analysis of the hydrogenation of C1C4 aldehydes and ketones over Ru(0001)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinha, Nishant K.; Neurock, Matthew

The structure and degree of substitution of C₁–C₄ oxygenate molecules can influence their chemisorption and reactivity on metal surfaces. Gradient-corrected periodic density functional theory calculations were carried out to analyze alkyl substituent effects on the hydrogenation of C₁–C₄ aldehydes and ketones to their corresponding alcohols. All of these aldehydes along with acetone were found to adsorb in a di-ση1η2(C,O) mode onto the Ru(0001) surface and result in rehybridization of the C=O bond. Steric hindrance from two alkyl substituents on the carbonyl backbone of methyl ethyl ketone (MEK), however, prevents it from binding di-ση1η2(C,O). It adsorbs instead atop a Ru atommore » in an g1(O) configuration through its oxygen atom. Hydrogenation of both aldehydes and ketones can occur through either a hydroxy or an alkoxy mechanism. The hydroxy route proceeds via the formation of the hydroxyalkyl intermediate R₁R₂C*OH by the addition of hydrogen to the oxygen of the carbonyl, whereas the alkoxy mechanism proceeds by the addition of hydrogen to the carbon end to form the alkoxy intermediate R₂CHO*). DFT calculations indicate that the activation barrier for the initial addition of hydrogen to the carbon to form the C–H bond in the alkoxy mechanism is independent of the substituent groups that are attached to the carbon center as these groups are oriented away from the surface in the transition state and thus have little influence on the activation energies. The activation barriers for the addition of hydrogen to the oxygen of the carbonyl to form the O–H bond in the hydroxy mechanism, however, was found to linearly correlate with the binding energy of the hydroxyalkyl intermediate that forms. This trend can be explained through the Brønsted–Evans–Polanyi relationship and the fact that both the hydroxyalkyl products and carbonyl reactants interact via their carbon centers and are correlated with one another. All of the carbonyls follow a similar trend in that the addition of hydrogen to the carbon of the carbonyl has a much lower barrier on Ru(0001) than the addition of hydrogen to the oxygen. The carbonyls thus readily react to form their alkoxy intermediates. Simple kinetic analyses and firstprinciple- based kinetic Monte Carlo simulations for formaldehyde over Ru(0001) show that the alkoxy is the most abundant surface intermediate and that the alkoxy route is more favorable than the hydroxy route.« less

Identification of vacuoles containing extraintestinal differentiated forms of Legionella pneumophila in colonized Caenorhabditis elegans soil nematodes.

PubMed

Hellinga, Jacqueline R; Garduño, Rafael A; Kormish, Jay D; Tanner, Jennifer R; Khan, Deirdre; Buchko, Kristyn; Jimenez, Celine; Pinette, Mathieu M; Brassinga, Ann Karen C

2015-08-01

Legionella pneumophila, a causative agent of Legionnaires' disease, is a facultative intracellular parasite of freshwater protozoa. Legionella pneumophila features a unique developmental network that involves several developmental forms including the infectious cyst forms. Reservoirs of L. pneumophila include natural and man-made freshwater systems; however, recent studies have shown that isolates of L. pneumophila can also be obtained directly from garden potting soil suggesting the presence of an additional reservoir. A previous study employing the metazoan Caenorhabditis elegans, a member of the Rhabditidae family of free-living soil nematodes, demonstrated that the intestinal lumen can be colonized with L. pneumophila. While both replicative forms and differentiated forms were observed in C. elegans, these morphologically distinct forms were initially observed to be restricted to the intestinal lumen. Using live DIC imaging coupled with focused transmission electron microscopy analyses, we report here that L. pneumophila is able to invade and establish Legionella-containing vacuoles (LCVs) in the intestinal cells. In addition, LCVs containing replicative and differentiated cyst forms were observed in the pseudocoelomic cavity and gonadal tissue of nematodes colonized with L. pneumophila. Furthermore, establishment of LCVs in the gonadal tissue was Dot/Icm dependent and required the presence of the endocytic factor RME-1 to gain access to maturing oocytes. Our findings are novel as this is the first report, to our knowledge, of extraintestinal LCVs containing L. pneumophila cyst forms in C. elegans tissues, highlighting the potential of soil-dwelling nematodes as an alternate environmental reservoir for L. pneumophila. © 2015 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

Allie: a database and a search service of abbreviations and long forms

PubMed Central

Yamamoto, Yasunori; Yamaguchi, Atsuko; Bono, Hidemasa; Takagi, Toshihisa

2011-01-01

Many abbreviations are used in the literature especially in the life sciences, and polysemous abbreviations appear frequently, making it difficult to read and understand scientific papers that are outside of a reader’s expertise. Thus, we have developed Allie, a database and a search service of abbreviations and their long forms (a.k.a. full forms or definitions). Allie searches for abbreviations and their corresponding long forms in a database that we have generated based on all titles and abstracts in MEDLINE. When a user query matches an abbreviation, Allie returns all potential long forms of the query along with their bibliographic data (i.e. title and publication year). In addition, for each candidate, co-occurring abbreviations and a research field in which it frequently appears in the MEDLINE data are displayed. This function helps users learn about the context in which an abbreviation appears. To deal with synonymous long forms, we use a dictionary called GENA that contains domain-specific terms such as gene, protein or disease names along with their synonymic information. Conceptually identical domain-specific terms are regarded as one term, and then conceptually identical abbreviation-long form pairs are grouped taking into account their appearance in MEDLINE. To keep up with new abbreviations that are continuously introduced, Allie has an automatic update system. In addition, the database of abbreviations and their long forms with their corresponding PubMed IDs is constructed and updated weekly. Database URL: The Allie service is available at http://allie.dbcls.jp/. PMID:21498548

Method of forming a hardened surface on a substrate

DOEpatents

Branagan, Daniel J.

2010-08-31

The invention includes a method of producing a hard metallic material by forming a mixture containing at least 55% iron and at least one of B, C, Si and P. The mixture is formed into an alloy and cooled to form a metallic material having a hardness of greater than about 9.2 GPa. The invention includes a method of forming a wire by combining a metal strip and a powder. The metal strip and the powder are rolled to form a wire containing at least 55% iron and from two to seven additional elements including at least one of C, Si and B. The invention also includes a method of forming a hardened surface on a substrate by processing a solid mass to form a powder, applying the powder to a surface to form a layer containing metallic glass, and converting the glass to a crystalline material having a nanocrystalline grain size.

Occurrence of thyroxine tablet (Thyradin S(®)) - induced liver dysfunction in a patient with subclinical hypothyroidism.

PubMed

Kang, Shino; Amino, Nobuyuki; Kudo, Takumi; Nishihara, Eijun; Ito, Mitsuru; Hirokawa, Mitsuyoshi; Miyauchi, Akira; Tamada, Daisuke; Yasuda, Takenori

2015-01-01

A 54-year-old woman with subclinical hypothyroidism developed liver dysfunction after increasing dose of levothyroxine (L-T4) in tablet form (Thyradin S(®)) from 25μg to 50μg. Viral hepatitis, autoimmune hepatitis and NASH were ruled out with examinations. After cessation of levothyroxine in 50μg tablet form, liver enzymes gradually returned to normal. She was diagnosed levothyroxine-induced liver injury, based on criteria proposed in DDW-J 2004 workshop. Thyradin S(®) powder 0.01% (here in after referred to as L-T4 in powder form) was tried as an alternative, and liver enzymes have remained within normal range. As for Thyradin S(®) tablet, additives are different for each type of levothyroxine sodium content. The difference of additive is whether Fe2O3 is contained or not: it is not included in Thyradin S(®) 50μg tablet and powder form. Although there are two case reports in the Japanese literature and three case reports in the English literature of liver dysfunction suspected due to L-T4, we cannot find past reports about cases of drug induced liver dysfunction due to Fe2O3 free levothyroxine tablet form. This is a rare case report of drug induced liver injury due to Fe2O3 free levothyroxine tablet form, and administration of L-T4 in powder form may be useful for treatment of cases similar to this one.

Influence of climate and eolian dust on the major-element chemistry and clay mineralogy of soils in the northern Bighorn basin, U.S.A.

USGS Publications Warehouse

Reheis, M.C.

1990-01-01

Soil chronosequences in the northern Bighorn basin permit the study of chronologic changes in the major-element chemistry and clay mineralogy of soils formed in different climates. Two chronosequences along Rock Creek in south-central Montana formed on granitic alluvium in humid and semiarid climates over the past two million years. A chronosequence at the Kane fans in north-central Wyoming formed on calcareous alluvium in an arid climate over the past 600,000 years. Detailed analyses of elemental chemistry indicate that the soils in all three areas gradually incorporated eolian dust that contained less zirconium, considered to be chemically immobile during weathering, than did the alluvium. B and C horizons of soils in the wettest of the chronosequences developed mainly at logarithmic rates, suggesting that leaching, initially rapid but decelerating, dominated the dust additions. In contrast, soils in the most arid of the chronosequences developed at linear rates that reflect progressive dust additions that were little affected by leaching. Both weathering and erosion may cause changes with time to appear logarithmic in A horizons of soils under the moist and semiarid climatic regimes. Clay minerals form with time in the basal B and C horizons and reflect climatic differences in the three areas. Vermiculite, mixed-layer illite-smectite, and smectite form in the soils of the moist-climate chronosequence; smectite forms in the semiarid-climate chronosequence; and smectite and palygorskite form in the arid-climate chronosequence. ?? 1990.

Influence of in-situ synthesized exopolysaccharides on the quality of gluten-free sorghum sourdough bread.

PubMed

Galle, Sandra; Schwab, Clarissa; Dal Bello, Fabio; Coffey, Aidan; Gänzle, Michael G; Arendt, Elke K

2012-04-16

The majority of gluten-free breads on the market are of poor sensory and textural quality. Exopolysaccharides (EPS) formed from sucrose during sourdough fermentation can improve the technological properties of gluten-free breads and potentially replace hydrocolloids. In this study, the influence of in situ formed EPS on dough rheology and quality of gluten-free sorghum bread was investigated. Dextran forming Weissella cibaria MG1 was compared to reuteran producing Lactobacillus reuteri VIP and fructan forming L. reuteri Y2. EPS containing bread batters were prepared by adding 10% and 20% of sourdough. As control served batters and bread containing sourdoughs fermented without sucrose and batters and bread without sourdough addition. The amount of EPS formed in situ ranged from 0.6 to 8.0 g/kg sourdough. EPS formed during sourdough fermentation were responsible for the significant decrease in dough strength and elasticity, with in situ formed dextran exhibiting the strongest impact. Increased release of glucose and fructose from sucrose during fermentation enhanced CO₂ production of yeast. Organic acids in control sourdough breads induced hardening of the bread crumb. EPS formed during sourdough fermentation masked the effect of the organic acids and led to a softer crumb in the fresh and stored sorghum bread. Among EPS, dextran showed the best shelf life improvements. In addition to EPS, all three strains produced oligosaccharides during sorghum sourdough fermentation contributing to the nutritional benefits of gluten-free sorghum bread. Results of this study demonstrated that EPS formed during sourdough fermentation can be successfully applied in gluten-free sorghum flours to improve their bread-making potentials. Copyright © 2012 Elsevier B.V. All rights reserved.

75 FR 11836 - Bioenergy Program for Advanced Biofuels

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-12

... (NOCP); additional payment for advanced biofuel produced from October 1, 2008 through September 30, 2009. SUMMARY: RBS is announcing additional payments to advanced biofuel producers determined eligible in Fiscal... biofuel produced in FY 2009, the request must include: Form RD 9005-3, ``Advanced Biofuel Program Payment...

7 CFR 3430.42 - Special award conditions.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) General. CSREES may, with respect to any award, impose additional conditions prior to or at the time of... needed; the time allowed for completing the corrective actions; and the method for requesting reconsideration of the additional requirements imposed. (c) Form CSREES-2009, Award Face Sheet. These special...

Blender for Antimisting Kerosene

NASA Technical Reports Server (NTRS)

Parikh, Pradip G.; Sarohia, Virendra; Yavrouian, Andre H.

1987-01-01

Blender continuously disperses controlled amount of flammability-reducing additive into stream of jet fuel. Resulting mixture consists of homogeneous suspension of additive polymer particles in fuel. Particles dissolve within 15 to 30 min, without agitation, forming airplane fuel known as antimisting kerosene which promises to reduce danger from fire in crashes.

Systems and Methods for Fabricating Objects Including Amorphous Metal Using Techniques Akin to Additive Manufacturing

NASA Technical Reports Server (NTRS)

Hofmann, Douglas (Inventor)

2017-01-01

Systems and methods in accordance with embodiments of the invention fabricate objects including amorphous metals using techniques akin to additive manufacturing. In one embodiment, a method of fabricating an object that includes an amorphous metal includes: applying a first layer of molten metallic alloy to a surface; cooling the first layer of molten metallic alloy such that it solidifies and thereby forms a first layer including amorphous metal; subsequently applying at least one layer of molten metallic alloy onto a layer including amorphous metal; cooling each subsequently applied layer of molten metallic alloy such that it solidifies and thereby forms a layer including amorphous metal prior to the application of any adjacent layer of molten metallic alloy; where the aggregate of the solidified layers including amorphous metal forms a desired shape in the object to be fabricated; and removing at least the first layer including amorphous metal from the surface.

Improvement of Tribological Performance of AISI H13 Steel by Means of a Self-Lubricated Oxide-Containing Tribo-layer

NASA Astrophysics Data System (ADS)

Cui, Xianghong; Jin, Yunxue; Chen, Wei; Zhang, Qiuyang; Wang, Shuqi

2018-03-01

A self-lubricated oxide-containing tribo-layer was induced to form by continuously adding particles of MoS2, Fe2O3 or their mixtures onto sliding interfaces of AISI H13 and 52100 steels. The artificial tribo-layer was always noticed to form continuously and cover the worn surface (termed as cover-type), whereas the original tribo-layer spontaneously formed with no additive was usually discontinuous and inserted into the substrate (termed as insert-type). Clearly, the cover-type and insert-type tribo-layers exactly corresponded to low and high wear rates, respectively. For the mixed additives of Fe2O3 + MoS2, the protective tribo-layers presented a load-carrying capability and lubricative function, which are attributed to the existence of Fe2O3 and MoS2. Hence, the wear rates and friction coefficients of H13 steel were markedly reduced.

Consolidation of tin sulfide chalcogels and xerogels with and without adsorbed iodine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riley, Brian J.; Pierce, David A.; Lepry, William C.

Tin sulfide (Sn2S3) chalcogels are one of the most effective non-oxide aerogels evaluated to date for iodine gas capture. This is attributed to the fact that the Sn within the gel network has a strong affinity for chemisorption of iodine to form SnI4. This study demonstrates an approach for consolidating the raw and iodine-sorbed Sn2S3 chalcogels into a chalcogenide glass using GeS2 as a glass forming additive. The system with both iodine-sorbed and iodine-free Sn2S3 chalcogels provides better glass-forming characteristics than Sn-S or Sn-S-I alone, and the quantity of iodine measured in the bulk glass of the consolidated iodine-sorbed Sn2S3more » chalcogel was at ~45 mass%. Additional experiments were also conducted using microwave sintering and hot isostatic pressing with Sn2S3 xerogels.« less

Metallic atomically-thin layered silicon epitaxially grown on silicene/ZrB 2

DOE PAGES

Gill, Tobias G.; Fleurence, Antoine; Warner, Ben; ...

2017-02-17

We observe a new two-dimensional (2D) silicon crystal, using low energy electron diffraction (LEED) and scanning tunnelling microscopy (STM) and it's formed by depositing additional Si atoms onto spontaneously-formed epitaxial silicene on a ZrB 2 thin film. From scanning tunnelling spectroscopy (STS) studies, we find that this atomically-thin layered silicon has distinctly different electronic properties. Angle resolved photoelectron spectroscopy (ARPES) reveals that, in sharp contrast to epitaxial silicene, the layered silicon exhibits significantly enhanced density of states at the Fermi level resulting from newly formed metallic bands. Furthermore, the 2D growth of this material could allow for direct contacting tomore » the silicene surface and demonstrates the dramatic changes in electronic structure that can occur by the addition of even a single monolayer amount of material in 2D systems.« less

Silicide formation process of Pt added Ni at low temperature: Control of NiSi2 formation

NASA Astrophysics Data System (ADS)

Ikarashi, Nobuyuki; Masuzaki, Koji

2011-03-01

Transmission electron microscopy (TEM) and ab initio calculations revealed that the Ni-Si reaction around 300 °C is significantly changed by adding Pt to Ni. TEM analysis clarified that NiSi2 was formed in a reaction between Ni thin film (˜1 nm) and Si substrate, while NiSi was formed when Pt was added to the Ni film. We also found that the Ni-adamantane structure, which acts as a precursor for NiSi2 formation around the reaction temperature, was formed in the former reaction but was significantly suppressed in the latter reaction. Theoretical calculations indicated that Pt addition increased stress at the Ni-adamantane structure/Si-substrate interface. The increase in interface stress caused by Pt addition should raise the interface energy to suppress the Ni-adamantane structure formation, leading to NiSi2 formation being suppressed.

Pharmaceutical properties of two ethenzamide-gentisic acid cocrystal polymorphs: Drug release profiles, spectroscopic studies and theoretical calculations.

PubMed

Sokal, Agnieszka; Pindelska, Edyta; Szeleszczuk, Lukasz; Kolodziejski, Waclaw

2017-04-30

The aim of this study was to evaluate the stability and solubility of the polymorphic forms of the ethenzamide (ET) - gentisic acid (GA) cocrystals during standard technological processes leading to tablet formation, such as compression and excipient addition. In this work two polymorphic forms of pharmaceutical cocrystals (ETGA) were characterized by 13 C and 15 N solid-state nuclear magnetic resonance and Fourier transformed infrared spectroscopy. Spectroscopic studies were supported by gauge including projector augmented wave (GIPAW) calculations of chemical shielding constants.Polymorphs of cocrystals were easily identified and characterized on the basis of solid-state spectroscopic studies. ETGA cocrystals behaviour during direct compressionand tabletting with excipient addition were tested. In order to choose the best tablet composition with suitable properties for the pharmaceutical industry dissolution profile studies of tablets containing polymorphic forms of cocrystals with selected excipients were carried out. Copyright © 2017. Published by Elsevier B.V.

Characterization of Ultra-high Temperature Ceramics via Transmission Electron Microscopy Relevant ZrB2-based Composites, TaC-based Composites and Oxides Containing SiC Chopped Fibers

DTIC Science & Technology

2015-03-06

was formed by ZrO2 rounded grains containing W traces and covered by H3BO3 acicular crystals deriving from hydration of B2O3 after exposure to...TaSi2 grains tended to form large pockets as wide as 3-8 m. Other spurious phases formed upon decomposition of the additive, were identified as SiC

Method for forming a hardened surface on a substrate

DOEpatents

Branagan, Daniel J [Iona, ID

2008-01-29

The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

Solid-state evaluation and polymorphic quantification of venlafaxine hydrochloride raw materials using the Rietveld method.

PubMed

Bernardi, Larissa S; Ferreira, Fábio F; Cuffini, Silvia L; Campos, Carlos E M; Monti, Gustavo A; Kuminek, Gislaine; Oliveira, Paulo R; Cardoso, Simone G

2013-12-15

Venlafaxine hydrochloride (VEN) is an antidepressant drug widely used for the treatment of depression. The purpose of this study was to carry out the preparation and solid state characterization of the pure polymorphs (Forms 1 and 2) and the polymorphic identification and quantification of four commercially-available VEN raw materials. These two polymorphic forms were obtained from different crystallization methods and characterized by X-ray Powder Diffraction (XRPD), Diffuse Reflectance Infrared Fourier Transform (DRIFT), Raman Spectroscopy (RS), liquid and solid state Nuclear Magnetic Resonance (NMR and ssNMR) spectroscopies, Differential Scanning Calorimetry (DSC), and Scanning Electron Microscopy (SEM) techniques. The main differences were observed by DSC and XRPD and the latter was chosen as the standard technique for the identification and quantification studies in combination with the Rietveld method for the commercial raw materials (VEN1-VEN4) acquired from different manufacturers. Additionally Form 1 and Form 2 can be clearly distinguished from their (13)C ssNMR spectra. Through the analysis, it was possible to conclude that VEN1 and VEN2 were composed only of Form 1, while VEN3 and VEN4 were a mixture of Forms 1 and 2. Additionally, the Rietveld refinement was successfully applied to quantify the polymorphic ratio for VEN3 and VEN4. Copyright © 2013 Elsevier B.V. All rights reserved.

Motivating Change from Lecture-Tutorial Modes to Less Traditional Forms of Teaching

ERIC Educational Resources Information Center

McLaren, Helen J.; Kenny, Paul L.

2015-01-01

Teaching academics are under pressure to move away from traditional lecture-tutorial teaching modes to less traditional forms. Such pressures are in addition to changes to funding arrangements and other developments that increasingly oblige universities to operate as businesses. The flow-on effects for teachers are increased student:staff ratios,…

31 CFR 203.20 - Investment account requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... obligations will be in the form of open-ended interest-bearing notes, or in the case of term investments, interest-bearing notes maintained for a predetermined period of time, and additions and reductions will be... in the form of interest-bearing notes payable upon a predetermined period of time not to exceed 90...

31 CFR 203.20 - Investment account requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... obligations will be in the form of open-ended interest-bearing notes, or in the case of term investments, interest-bearing notes maintained for a predetermined period of time, and additions and reductions will be... in the form of interest-bearing notes payable upon a predetermined period of time not to exceed 90...

Mo-Si-B-Based Coatings for Ceramic Base Substrates

NASA Technical Reports Server (NTRS)

Perepezko, John Harry (Inventor); Sakidja, Ridwan (Inventor); Ritt, Patrick (Inventor)

2015-01-01

Alumina-containing coatings based on molybdenum (Mo), silicon (Si), and boron (B) ("MoSiB coatings") that form protective, oxidation-resistant scales on ceramic substrate at high temperatures are provided. The protective scales comprise an aluminoborosilicate glass, and may additionally contain molybdenum. Two-stage deposition methods for forming the coatings are also provided.

76 FR 65783 - Registration of Security-Based Swap Dealers and Major Security-Based Swap Participants

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... Act Rules and Forms A. Registration Application and Amendment 1. Proposed Rule 15Fb2-1 i. Form of Application ii. Senior Officer Certification iii. Electronic Filing iv. Standards for Granting or Denying Applications v. Request for Comment on Additional Registration Considerations 2. Amendments to Application...

Low-Melt Poly(Amic Acids) and Polyimides and Their Uses

NASA Technical Reports Server (NTRS)

Parrish, Clyde F. (Inventor); Jolley, Scott T. (Inventor); Gibson, Tracy L. (Inventor); Snyder, Sarah J. (Inventor); Williams, Martha K. (Inventor)

2016-01-01

Provided are low-melt polyimides and poly(amic acids) (PAAs) for use as adhesives, and methods of using the materials for attaching two substrates. The methods typically form an adhesive bond that is hermetically sealed to both substrates. Additionally, the method typically forms a cross-linked bonding material that is flexible.

77 FR 50378 - Approval and Promulgation of Implementation Plans; Tennessee; Knoxville; Fine Particulate Matter...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-21

... Roane County that includes the Tennessee Valley Authority's Kingston Fossil Plant. This action is being... characters, any form of encryption, and be free of any defects or viruses. For additional information about... the Internet and will be publicly available only in hard copy form. Publicly available docket...

12 CFR 335.801 - Inapplicable SEC regulations; FDIC substituted regulations; additional information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... a continuing hardship exemption under these rules may file the forms with the FDIC in paper format... these rules may file the appropriate forms with the FDIC in paper format. Instructions for continuing...) Previously filed exhibits, whether in paper or electronic format, may be incorporated by reference into an...

12 CFR 335.801 - Inapplicable SEC regulations; FDIC substituted regulations; additional information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... a continuing hardship exemption under these rules may file the forms with the FDIC in paper format... these rules may file the appropriate forms with the FDIC in paper format. Instructions for continuing...) Previously filed exhibits, whether in paper or electronic format, may be incorporated by reference into an...

12 CFR 335.801 - Inapplicable SEC regulations; FDIC substituted regulations; additional information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... a continuing hardship exemption under these rules may file the forms with the FDIC in paper format... these rules may file the appropriate forms with the FDIC in paper format. Instructions for continuing...) Previously filed exhibits, whether in paper or electronic format, may be incorporated by reference into an...

12 CFR 335.801 - Inapplicable SEC regulations; FDIC substituted regulations; additional information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... a continuing hardship exemption under these rules may file the forms with the FDIC in paper format... these rules may file the appropriate forms with the FDIC in paper format. Instructions for continuing...) Previously filed exhibits, whether in paper or electronic format, may be incorporated by reference into an...

Non-Arbitrariness in Mapping Word Form to Meaning: Cross-Linguistic Formal Markers of Word Concreteness

ERIC Educational Resources Information Center

Reilly, Jamie; Hung, Jinyi; Westbury, Chris

2017-01-01

Arbitrary symbolism is a linguistic doctrine that predicts an orthogonal relationship between word forms and their corresponding meanings. Recent corpora analyses have demonstrated violations of arbitrary symbolism with respect to concreteness, a variable characterizing the sensorimotor salience of a word. In addition to qualitative semantic…

The Role of Good Form in Young Infants' Perception of Partly Occluded Objects.

ERIC Educational Resources Information Center

Johnson, Scott P.; Bremner, J. Gavin; Slater, Alan M.; Mason, Uschi C.

2000-01-01

Three experiments investigated whether 4-month-olds would attend to and utilize the global configuration ("good form") of a partly occluded, moving object to perceive its unit and coherence behind the occluder. Results indicated that curvature per se provided information in support of completion, in addition to global configuration and…

Use of chemical soil additives to stabilize off-road vehicle trails

Treesearch

J.N. Davis; J.E. Baier; J.P. Fulton; D.A. Brown; T.P. McDonald

2007-01-01

Off‐road vehicle (ORV) use is an increasingly popular form of outdoor recreation throughout the United States. This form of motorized recreation, however, can sometimes lead to serious erosion of trail running surfaces, with resulting export of sediment into forested ecosystems causing environmental degradation. This project was conducted to determine the...

75 FR 48346 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-10

... influenza-like illness, Respiratory and Enterovirus surveillance, rabies, waterborne diseases, cholera and... addition, new influenza forms and one new rabies form have been added. A new parasitic disease is being... (NREVSS) Enhanced Animal Rabies Surveillance (electronic) 52 52 3/60 135 Rabies (paper) 3 12 15/60 9...

A Reduced Form Model for Ozone Based on Two Decades of CMAQ Simulations for the Continental United States

EPA Science Inventory

A Reduced Form Model (RFM) is a mathematical relationship between the inputs and outputs of an air quality model, permitting estimation of additional modeling without costly new regional-scale simulations. A 21-year Community Multiscale Air Quality (CMAQ) simulation for the con...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murphy, Timothy A; Tupy, Michael J; Abraham, Timothy W

A wax comprises a metathesis product and/or a product that resembles, at least in part, a product which may be formed from a metathesis reaction. The wax may be used to form articles for example, candles (container candles, votive candles, and/or a pillar candles), crayons, fire logs or tarts. The wax commonly includes other components in addition to the metathesis product.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murphy, Timothy A.; Tupy, Michael J.; Abraham, Timothy W.

A wax comprises a metathesis product and/or a product that resembles, at least in part, a product which may be formed from a metathesis reaction. The wax may be used to form articles, for example, candles (container candles, votive candles, and/or a pillar candles), crayons, fire logs, or tarts. The wax commonly includes other components in addition to the metathesis product.

Research on width control of Metal Fused-coating Additive Manufacturing based on active control

NASA Astrophysics Data System (ADS)

Ren, Chuan qi; Wei, Zheng ying; Wang, Xin; Du, Jun; Zhang, Shan; Zhang, Zhitong; Bai, Hao

2017-12-01

Given the stability of the shape of the forming layer is one of the key problems that affect the final quality of the sample morphology, taking a study on the forming process and the control method of morphology make a significant difference to metal fused-coating additive manufacturing (MFCAM) in achieving the efficient and stable forming. To improve the quality and precision of the samples of single-layer single pass, a control method of morphology based on active control was established by this paper. The real-time acquisition of image was realized by CCD and the characteristics of morphology of the forming process were simultaneously extracted. Making analysis of the characteristics of the width during the process, the relationship between the relative difference of different frames and moving speed was given. A large number of experiments are used to verify the response speed and accuracy of the system. The results show that the active system can improve the morphology of the sample and the smoothness of the width of the single channel, and increase the uniformity of width by 55.16%.

Studies towards the stabilisation of a mushroom phytase produced by submerged cultivation.

PubMed

Spier, Michele Rigon; Behsnilian, Diana; Zielinski, Acácio; Konietzny, Ursula; Greiner, Ralf

2015-10-01

A novel phytase from Ganoderma australe G24 was produced by submerged cultivation and recovery. Liquid and solid forms of phytase were developed; both types of product were formulated using different additives. Ganoderma australe G24 phytase was very stable in liquid form with NaCl and sodium acetate buffer. Solid form products were obtained by spray-drying using different polymers to encapsulate the phytase and the capsules obtained were analyzed by electron microscopy. Micrographs confirmed micro and nanoparticles formed with maltodextrin (300 nm to 7-8 µm) without the presence of agglomerates. The use of maltodextrin for solid formulation of G. australe G24 phytase is recommended, and resulted in good stability after the drying process and during storage (shelf life). Kinetic models of phytase inactivation in the microencapsulated powders over time were proposed for the different stabilizing additives. Inactivation rate constants, half-lives and D values (decimal reduction time) were obtained. Phytase encapsulated with maltodextrin remained stable after 90 days, with k 0.0019 day(-1) and a half-life (t1/2) of 367.91 days(-1).

Morphological isolates in idioms: cranberries or real words?

PubMed

Nenonen, M; Niemi, J

The present study focuses on a subtype of Finnish nouns that appear only as complements in idiomatic verb phrases. In addition to the idioms as their sole environment, these idiomatic isolates, as we call them, are typically frozen to a single case form. In two experiments, in a subjective rating task and a lexical decision task, the isolates are pitted against ordinary nouns and nouns that appear as frozen forms in idioms in addition to being ordinary, free words. The experiments show that the isolates, in spite of their defective syntactic and morphological properties, are processed like ordinary lexical items. Copyright 1999 Academic Press.

Organobase catalyzed 1,4-conjugate addition of 4-hydroxycoumarin on chalcones: Synthesis, NMR and single-crystal X-ray diffraction studies of novel warfarin analogues

NASA Astrophysics Data System (ADS)

Talhi, Oualid; Fernandes, José A.; Pinto, Diana C. G. A.; Almeida Paz, Filipe A.; Silva, Artur M. S.

2015-08-01

The synthesis of a new series of warfarin analogues by convenient organobase catalyzed 1,4-conjugate addition of 4-hydroxycoumarin to chalcone derivatives is described. 1H NMR spectroscopy evidenced the presence of a predominant acyclic open-form together with the cyclic hemiketal tautomers of the resulting Michael adducts. The acyclic open-form has been unequivocally proved by single-crystal X-ray diffraction analysis. The use of the B ring ortho-hydroxychalcone synthons in this reaction has led to a diastereoselective synthesis of warfarin bicyclo[3.3.1]nonane ketal derivatives.

CUSP-PINCH DEVICE

DOEpatents

Baker, W.R.; Watteau, J.P.H.

1962-06-01

An ion-electron plasma heating device of the pinch tube class is designed with novel means for counteracting the instabilities of an ordinary linear pinch discharge. A plasma-forming discharge is created between two spacedapart coaxial electiodes through a gas such as deuterium. A pair of spaced coaxial magnetic field coils encircle the discharge and carry opposing currents so that a magnetic field having a cuspate configuration is created around the plasma, the field being formed after the plasma has been established but before significant instability arises. Thus, containment time is increased and intensified heating is obtained. In addition to the pinch compression heating additional heating is obtained by high-frequency magnetic field modulation. (AEC)

Palladium-catalyzed heteroannulation of 1,3-dienes to form alpha-alkylidene-gamma-butyrolactones.

PubMed

Gagnier, S V; Larock, R C

2000-03-10

alpha-Alkylidene-gamma-butyrolactones are readily prepared by the palladium-catalyzed heteroannulation of a variety of 1,3-dienes by alpha-iodo and alpha-bromo acrylic acids. The best results are obtained by employing a catalytic amount of the sterically hindered chelating alkyl phosphine D-t-BPF [(di-tert-butylphosphino)ferrocene]. In most cases, this process is highly regioselective. The reaction is believed to proceed via (1) oxidative addition of the vinylic halide to Pd(0), (2) organopalladium addition to the less hindered end of the 1,3-diene to form a pi-allylpalladium intermediate, and (3) nucleophilic displacement of the palladium by the carboxylate ion.

Controlling intermetallic compound growth in SnAgCu/Ni-P solder joints by nanosized Cu6Sn5 addition

NASA Astrophysics Data System (ADS)

Kao, Szu-Tsung; Lin, Yung-Chi; Duh, Jenq-Gong

2006-03-01

Nanosized Cu6Sn5 dispersoids were incorporated into Sn and Ag powders and milled together to form Sn-3Ag-0.5Cu composite solders by a mechanical alloying process. The aim of this study was to investigate the interfacial reaction between SnAgCu composite solder and electroless Ni-P/Cu UBM after heating for 15 min. at 240°C. The growth of the IMCs formed at the composite solder/EN interface was retarded as compared to the commercial Sn3Ag0.5Cu solder joints. With the aid of the elemental distribution by x-ray color mapping in electron probe microanalysis (EPMA), it was revealed that the SnAgCu composite solder exhibited a refined structure. It is proposed that the Cu6Sn5 additives were pinned on the grain boundary of Sn after heat treatment, which thus retarded the movement of Cu toward the solder/EN interface to form interfacial compounds. In addition, wetting is an essential prerequisite for soldering to ensure good bonding between solder and substrate. It was demonstrated that the contact angles of composite solder paste was <25°, and good wettability was thus assured.

Ni and Cr addition to alloy waste forms to reduce radionuclide environmental releases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, L.

2016-10-11

Reference alloy waste forms (RAW) were fabricated and underwent hybrid corrosion/immersion testing to parameterize the ANL analytical oxidative-dissolution model to enable the calculation of fractional release rates and to determine the effectiveness of Ni and Cr trim additions in reducing release rates of radionuclide surrogates. Figure 1 shows the prototypical multiphase microstructure of the alloys with each phase type contributing about equally to the exposed surface area. The waste forms tested at SRNL were variations of the RAW-6 formulation that uses HT9 as the main alloy component, and are meant to enable evaluation of the impact of Ni and Crmore » trim additions on the release rates of actinides and Tc-99. The test solutions were deaerated alkaline and acidic brines, ranging in pH 3 to pH 10, representing potential repositories with those conditions. The testing approach consisted of 4 major steps; 1) bare surface corrosion measurements at pH values of 3, 5, 8, and 10, 2) hybrid potentiostatic hold/exposure measurements at pH 3, 3) measurement of radionuclide concentrations and relations to anodic current from potentiostatic holds, and 4) identification of corroding phases using SEM/EDS of electrodes.« less

Design and application of water-in-oil emulsions for use in lipstick formulations.

PubMed

Le Révérend, B J D; Taylor, M S; Norton, I T

2011-06-01

The addition of water to lipsticks in the form of a water-in-oil emulsion is an attractive opportunity for cosmetics manufacturers to deliver hydrophilic molecules to the consumers, as well as improving the moisturizing properties. In this work, the effect of the emulsifier type and water content on the structural properties of the designed products was investigated. It has been shown that PGPR leads to smaller droplets than the other emulsifiers tested. This was attributed to the ability of PGPR to form elastic interfaces that slow the coalescence between droplets during the process. It was also observed that crystals of wax tend to form structures at the interface upon cooling that prevent coalescence during storage. These structures also prevent leakage of water into the continuous phase. No effect of the water content on the melting properties of the emulsions was observed. Upon addition of more than 10% water, softening of the material was measured, due to the overall decrease in solid content. Addition of crystalline material (hard paraffin) was successfully used to reinstate the material properties. © 2011 The Authors. ICS © 2011 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Diethyl [(4-bromo­phen­yl)(5-chloro-2-hydroxy­anilino)meth­yl]phospho­nate

PubMed Central

Babu, V. H. H. Surendra; Krishnaiah, M.; Prasad, G. Syam; C. Suresh Reddy; Kant, Rajni

2009-01-01

In the title compound, C17H20BrClNO4P, inter­molecular C—H⋯O and N—H⋯O hydrogen bonds form centrosymmetric R 2 2(10) dimers linked through O—H⋯O inter­molecular hydrogen bonds, which form centrosymmetric R 2 2(16) dimers. All these hydrogen bonds form chains along [010]. In addition, the crystal structure is stabilized by weak C—H⋯Br hydrogen bonds. The very weak intramolecular N—H⋯O interaction forms a five-membered ring. PMID:21578446

Recovering hydrocarbons from hydrocarbon-containing vapors

DOEpatents

Mirza, Zia I.; Knell, Everett W.; Winter, Bruce L.

1980-09-30

Values are recovered from a hydrocarbon-containing vapor by contacting the vapor with quench liquid consisting essentially of hydrocarbons to form a condensate and a vapor residue, the condensate and quench fluid forming a combined liquid stream. The combined liquid stream is mixed with a viscosity-lowering liquid to form a mixed liquid having a viscosity lower than the viscosity of the combined liquid stream to permit easy handling of the combined liquid stream. The quench liquid is a cooled portion of the mixed liquid. Viscosity-lowering liquid is separated from a portion of the mixed liquid and cycled to form additional mixed liquid.

10 CFR 2.1004 - Amendments and additions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Waste at a Geologic Repository § 2.1004 Amendments and additions. Any document that has not been provided to other parties in electronic form must be identified in an electronic notice and made available... for the high-level waste proceeding. The time allowed under this paragraph will be stayed pending...

10 CFR 2.1004 - Amendments and additions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Waste at a Geologic Repository § 2.1004 Amendments and additions. Any document that has not been provided to other parties in electronic form must be identified in an electronic notice and made available... for the high-level waste proceeding. The time allowed under this paragraph will be stayed pending...

10 CFR 2.1004 - Amendments and additions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Waste at a Geologic Repository § 2.1004 Amendments and additions. Any document that has not been provided to other parties in electronic form must be identified in an electronic notice and made available... for the high-level waste proceeding. The time allowed under this paragraph will be stayed pending...

Is adermatoglyphia an additional feature of Kindler Syndrome?

PubMed

Almeida, Hiram Larangeira de; Goetze, Fernanda Mendes; Fong, Kenneth; Lai-Cheong, Joey; McGrath, John

2015-01-01

A typical feature of Kindler Syndrome is skin fragility; this condition in currently classified as a form of epidermolysis bullosa. We describe a rarely reported feature of two cases, one sporadic and one familial; both patients noticed acquired adermatoglyphia. The loss of dermatoglyphics could be an additional feature of this syndrome.

21 CFR 73.1350 - Mica-based pearlescent pigments.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Identity. (1) The color additive is formed by depositing titanium and/or iron salts onto mica, followed by heating to produce one of the following combinations: Titanium dioxide on mica; iron oxide on mica; titanium dioxide and iron oxide on mica. Mica used to manufacture the color additive shall conform in...

12 CFR 707.11 - Additional disclosure requirements for overdraft services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Sample Form B-10 in appendix B. (b) Advertising disclosures for overdraft services—(1) Disclosures... overdrafts not subject to additional advertising disclosures. Paragraph (b)(1) of this section does not apply... advertisement made through broadcast or electronic media, such as television or radio; (iv) An advertisement...

26 CFR 1.6654-5 - Payments of estimated tax.

Code of Federal Regulations, 2010 CFR

2010-04-01

....6654-5 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Additions to the Tax, Additional Amounts, and Assessable Penalties § 1.6654-5... on Form 1040-ES. For the purpose of determining the estimated tax, the amount of gross income which...

ANALYSIS OF THE ENANTIOMERS OF CHIRAL PESTICIDES AND OTHER POLLUTANTS IN ENVIRONMENTAL SAMPLES BY CAPILLARY ELECTROPHORESIS

EPA Science Inventory

The generic method described here involves typical capillary electrophoresis (CE) techniques, with the addition of cyclodextrin chiral selectors to the electrolyte for enantiomer separation and also, in the case of neutral analytes, the further addition of a micelle forming comp...

19 CFR 123.22 - In-transit manifest.

Code of Federal Regulations, 2011 CFR

2011-04-01

... separate in-transit manifest is not required. (b) Additional copies. In the following cases additional... train sheet shall also be presented. (4) In all other cases where no in-transit manifest form is... enter and reenter Canada in a continuing movement en route to a final destination in the United States...

19 CFR 123.22 - In-transit manifest.

Code of Federal Regulations, 2014 CFR

2014-04-01

... separate in-transit manifest is not required. (b) Additional copies. In the following cases additional... train sheet shall also be presented. (4) In all other cases where no in-transit manifest form is... enter and reenter Canada in a continuing movement en route to a final destination in the United States...

19 CFR 123.22 - In-transit manifest.

Code of Federal Regulations, 2013 CFR

2013-04-01

... separate in-transit manifest is not required. (b) Additional copies. In the following cases additional... train sheet shall also be presented. (4) In all other cases where no in-transit manifest form is... enter and reenter Canada in a continuing movement en route to a final destination in the United States...

Food additives reducing volatility of antioxidants at frying temperature

USDA-ARS?s Scientific Manuscript database

At frying temperature, antioxidants are lost not only by reaction with radicals formed by oil oxidation, but also by decomposition and evaporation before they are able to exert antioxidant activity. In this study it was hypothesized that an additive that can bind or interact with an antioxidant coul...

78 FR 51733 - Draft Report on Carcinogens Monographs for ortho-Toluidine and Pentachlorophenol and By-Products...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-21

... Monographs for ortho-Toluidine and Pentachlorophenol and By-Products of Its Synthesis; Availability of... candidate substance is defined as ``pentachlorophenol and by-products of its synthesis.'' During synthesis of pentachlorophenol, several additional chlorinated molecules are formed as by-products. In addition...

24 CFR 235.1218 - Additional eligibility requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; Direct Endorsement § 235.1218 Additional eligibility requirements. (a) Mortgage amount. It must be in an... par on one of the following dates, whichever rate is higher: (i) The date the Direct Endorsement mortgagee's underwriter signs the Mortgage Credit Analysis Worksheet (form HUD-92900 WS); or (ii) The date...

Up to Four Distinct Polypeptides Are Produced from the γ34.5 Open Reading Frame of Herpes Simplex Virus 2

PubMed Central

Korom, Maria; Davis, Katie L.

2014-01-01

ABSTRACT The herpes simplex virus 1 (HSV-1) ICP34.5 protein strongly influences neurovirulence and regulates several cellular antiviral responses. Despite the clinical importance of HSV-2, relatively little is known about its ICP34.5 ortholog. We found that HSV-2 produces up to four distinct forms of ICP34.5 in infected cells: a full-length protein, one shorter form sharing the N terminus, and two shorter forms sharing the C terminus. These forms appeared with similar kinetics and accumulated in cells over much of the replication cycle. We confirmed that the N-terminal form is translated from the primary unspliced transcript to a stop codon within the intron unique to HSV-2 γ34.5. We found that the N-terminal form was produced in a variety of cell types and by 9 of 10 clinical isolates. ICP27 influenced but was not required for expression of the N-terminal form. Western blotting and reverse transcription-PCR indicated the C-terminal forms did not contain the N terminus and were not products of alternative splicing or internal transcript initiation. Expression plasmids encoding methionine at amino acids 56 and 70 generated products that comigrated in SDS-PAGE with the C1 and C2 forms, respectively, and mutation of these sites abolished C1 and C2. Using a recombinant HSV-2 encoding hemagglutinin (HA)-tagged ICP34.5, we demonstrated that the C-terminal forms were also produced during infection of many human and mouse cell types but were not detectable in mouse primary neurons. The protein diversity generated from the HSV-2 γ34.5 open reading frame implies additional layers of cellular regulation through potential independent activities associated with the various forms of ICP34.5. IMPORTANCE The herpes simplex virus 1 (HSV-1) protein ICP34.5, encoded by the γ34.5 gene, interferes with several host defense mechanisms by binding cellular proteins that would otherwise stimulate the cell's autophagic, translational-arrest, and type I interferon responses to virus infection. ICP34.5 also plays a crucial role in determining the severity of nervous system infections with HSV-1 and HSV-2. The HSV-2 γ34.5 gene contains an intron not present in HSV-1 γ34.5. A shorter N-terminal form of HSV-2 ICP34.5 can be translated from the unspliced γ34.5 mRNA. Here, we show that two additional forms consisting of the C-terminal portion of ICP34.5 are generated in infected cells. Production of these N- and C-terminal forms is highly conserved among HSV-2 strains, including many clinical isolates, and they are broadly expressed in several cell types, but not mouse primary neurons. Multiple ICP34.5 polypeptides add additional complexity to potential functional interactions influencing HSV-2 neurovirulence. PMID:25031346

Toughening reinforced epoxy composites with brominated polymeric additives

NASA Technical Reports Server (NTRS)

Nir, Z. (Inventor); Gilwee, W. J., Jr. (Inventor)

1985-01-01

Cured polyfunctional epoxy resins including tris(hydroxyphenyl)methane triglycidyl ether are toughened by addition of polybrominated polymeric additives having an EE below 1500 to the pre-cure composition. Carboxy-terminated butadiene-acrylonitrile rubber is optionally present in the pre-cure mixture as such or as a pre-formed copolymer with other reactants. Reinforced composites, particularly carbon-reinforced composites, of these resins are disclosed and shown to have improved toughness.

Additive Manufacturing: From Form to Function

DTIC Science & Technology

2016-01-01

embedded electronics in clothing that could allow additional protective benefits and health monitoring options.13 AM has also enabled proof-of-concept...the International Space Station (ISS) in September 2014 to test plastics . The second 3D printer was delivered to the ISS in April 2016. In addition...was developed by the Innovative Advanced Concepts program. The sensor is essentially a transparent sheet of plastic with printed elec- tronics that

Toughening reinforced epoxy composites with brominated polymeric additives

NASA Technical Reports Server (NTRS)

Nir, Z.; Gilwee, W. J., Jr. (Inventor)

1985-01-01

Cured polyfunctional epoxy resins including tris (hydroxyphenyl) methane triglycidyl ether are toughened by addition of polybrominated polymeric additives having an EE below 1500 to the pre-cure composition. Carboxy terminated butadiene acrylonitrile rubber is optionally present in the precure mixture as such or as a pre-formed copolymer with other reactants. Reinforced composites, particularly carbon reinforced composites, of these resins are disclosed and shown to have improved toughness.

Tough, High-Performance, Thermoplastic Addition Polymers

NASA Technical Reports Server (NTRS)

Pater, Ruth H.; Proctor, K. Mason; Gleason, John; Morgan, Cassandra; Partos, Richard

1991-01-01

Series of addition-type thermoplastics (ATT's) exhibit useful properties. Because of their addition curing and linear structure, ATT polymers have toughness, like thermoplastics, and easily processed, like thermosets. Work undertaken to develop chemical reaction forming stable aromatic rings in backbone of ATT polymer, combining high-temperature performance and thermo-oxidative stability with toughness and easy processibility, and minimizing or eliminating necessity for tradeoffs among properties often observed in conventional polymer syntheses.

21 CFR 73.3115 - 2-[[2,5-Diethoxy-4-[(4-methylphenyl)thiol]phenyl]azo]-1,3,5-benzenetriol.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... The color additive2-[[2,5-diethoxy-4-[(4-methylphenyl)thio]phenyl]azo]-1,3,5-benzenetriol is formed in situ in soft (hydrophilic) contact lenses. (b) Uses and restrictions. The color additive 2-[[2,5... following restrictions: (1) The quantity of the color additive does not exceed 1.1×10−7 grams in a soft...

21 CFR 73.3115 - 2-[[2,5-Diethoxy-4-[(4-methylphenyl)thiol]phenyl]azo]-1,3,5-benzenetriol.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... The color additive2-[[2,5-diethoxy-4-[(4-methylphenyl)thio]phenyl]azo]-1,3,5-benzenetriol is formed in situ in soft (hydrophilic) contact lenses. (b) Uses and restrictions. The color additive 2-[[2,5... following restrictions: (1) The quantity of the color additive does not exceed 1.1×10−7 grams in a soft...

21 CFR 73.3115 - 2-[[2,5-Diethoxy-4-[(4-methylphenyl)thiol]phenyl]azo]-1,3,5-benzenetriol.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... The color additive2-[[2,5-diethoxy-4-[(4-methylphenyl)thio]phenyl]azo]-1,3,5-benzenetriol is formed in situ in soft (hydrophilic) contact lenses. (b) Uses and restrictions. The color additive 2-[[2,5... following restrictions: (1) The quantity of the color additive does not exceed 1.1×10−7 grams in a soft...

21 CFR 73.3115 - 2-[[2,5-Diethoxy-4-[(4-methylphenyl)thiol]phenyl]azo]-1,3,5-benzenetriol.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... The color additive2-[[2,5-diethoxy-4-[(4-methylphenyl)thio]phenyl]azo]-1,3,5-benzenetriol is formed in situ in soft (hydrophilic) contact lenses. (b) Uses and restrictions. The color additive 2-[[2,5... following restrictions: (1) The quantity of the color additive does not exceed 1.1×10−7 grams in a soft...

21 CFR 73.3115 - 2-[[2,5-Diethoxy-4-[(4-methylphenyl)thiol]phenyl]azo]-1,3,5-benzenetriol.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... The color additive2-[[2,5-diethoxy-4-[(4-methylphenyl)thio]phenyl]azo]-1,3,5-benzenetriol is formed in situ in soft (hydrophilic) contact lenses. (b) Uses and restrictions. The color additive 2-[[2,5... following restrictions: (1) The quantity of the color additive does not exceed 1.1×10−7 grams in a soft...

Functional magnetic microspheres

NASA Technical Reports Server (NTRS)

Rembaum, Alan (Inventor); Landel, Robert F. (Inventor); Yen, Shiao-Ping S. (Inventor)

1981-01-01

Functional magnetic particles are formed by dissolving a mucopolysaccharide such as chitosan in acidified aqueous solution containing a mixture of ferrous chloride and ferric chloride. As the pH of the solution is raised magnetite is formed in situ in the solution by raising the pH. The dissolved chitosan is a polyelectrolyte and forms micelles surrounding the granules at pH of 8-9. The chitosan precipitates on the granules to form microspheres containing the magnetic granules. On addition of the microspheres to waste aqueous streams containing dissolved ions, the hydroxyl and amine functionality of the chitosan forms chelates binding heavy metal cations such as lead, copper, and mercury and the chelates in turn bind anions such as nitrate, fluoride, phosphate and borate.

The effects of fixed-time reinforcement schedules on functional response classes: a translational study.

PubMed

Heinicke, Megan R; Carr, James E; LeBlanc, Linda A

2012-01-01

Research on functional response classes has applied significance because less severe forms of problem behavior have been found to co-occur with more severe forms. In addition, the most severe forms of problem behavior are sometimes targeted for intervention without monitoring other less severe forms. In such cases, it is unknown whether and how untreated forms of problem behavior covary with the targeted behaviors. The present study employed a translational procedure (with button presses as the target behavior) to investigate response covariation under noncontingent reinforcement with typically developing preschoolers. The results indicated that noncontingent reinforcement was generally effective in decreasing all response class members when only one member was targeted.

High power density fuel cell comprising an array of microchannels

DOEpatents

Morse, Jeffrey D.; Upadhye, Ravindra S.; Spadaccini, Christopher M.; Park, Hyung Gyu

2013-10-15

A fuel cell according to one embodiment includes a porous electrolyte support structure defining an array of microchannels, the microchannels including fuel and oxidant microchannels; fuel electrodes formed along some of the microchannels; and oxidant electrodes formed along other of the microchannels. A method of making a fuel cell according to one embodiment includes forming an array of walls defining microchannels therebetween using at least one of molding, stamping, extrusion, injection and electrodeposition; processing the walls to make the walls porous, thereby creating a porous electrolyte support structure; forming anode electrodes along some of the microchannels; and forming cathode electrodes along other of the microchannels. Additional embodiments are also disclosed.

Epitaxial CoSi2 on MOS devices

DOEpatents

Lim, Chong Wee; Shin, Chan Soo; Petrov, Ivan Georgiev; Greene, Joseph E.

2005-01-25

An Si.sub.x N.sub.y or SiO.sub.x N.sub.y liner is formed on a MOS device. Cobalt is then deposited and reacts to form an epitaxial CoSi.sub.2 layer underneath the liner. The CoSi.sub.2 layer may be formed through a solid phase epitaxy or reactive deposition epitaxy salicide process. In addition to high quality epitaxial CoSi.sub.2 layers, the liner formed during the invention can protect device portions during etching processes used to form device contacts. The liner can act as an etch stop layer to prevent excessive removal of the shallow trench isolation, and protect against excessive loss of the CoSi.sub.2 layer.

Hardfacing material

DOEpatents

Branagan, Daniel J [Iona, ID

2012-01-17

A method of producing a hard metallic material by forming a mixture containing at least 55% iron and at least one of boron, carbon, silicon and phosphorus. The mixture is formed into an alloy and cooled to form a metallic material having a hardness of greater than about 9.2 GPa. The invention includes a method of forming a wire by combining a metal strip and a powder. The metal strip and the powder are rolled to form a wire containing at least 55% iron and from two to seven additional elements including at least one of C, Si and B. The invention also includes a method of forming a hardened surface on a substrate by processing a solid mass to form a powder, applying the powder to a surface to form a layer containing metallic glass, and converting the glass to a crystalline material having a nanocrystalline grain size.

The efficacy of gaseous ozone against different forms of Candida albicans

PubMed Central

Zargaran, M; Fatahinia, M; Zarei Mahmoudabadi, A

2017-01-01

Background and Purpose: Ozone is an inorganic molecule with effective antimicrobial properties. Clinical treatment of ozonated water was used for the elimination of Candida albicans, Enterococcus faecalis, endotoxins, and biofilms from root canals. In addition, its therapeutic effects for tinea pedis, ulcers, and leishmaniasis were investigated. The purpose of the present study was to evaluate the fungicidal effects of ozone on different forms of C. albicans. In addition, antifungal susceptibility profile of strains was assessed before and after exposure to ozone. Materials and Methods: Fifty strains of C. albicans were exposed to gaseous ozone at different times. Furthermore, biofilm formation and germ tube production were evaluated when yeast suspensions were exposed to ozone. In addition, antifungal susceptibility of ozone resistant colonies was investiagted as compared to controls. Results: Ozone was highly effective in killing C. albicans in yeast form and inhibition of germ tube formation during 210 and 180 s, respectively. Although with increasing exposure time biofilm production was considerably decreased, resistance to ozone was much higher among vaginal and nail isolates even after 60 min. All the strains were sensitive to fluconazole, caspofungin, and terbinafine pre- and post-ozone exposure. Resistance to amphotericin B was significantly enhanced after exposure to ozone. Conclusion: Although ozone was highly effective on the yeast form of C. albicans and it can inhibit the formation of germ tubes in C. albicans, the complete removal of biofilms did not happen even after 60 min. It seems that ozone therapy induces resistance to amphotericin B. PMID:29354778

Designed synergetic effect of electrolyte additives to improve interfacial chemistry of MCMB electrode in propylene carbonate-based electrolyte for enhanced low and room temperature performance.

PubMed

Wotango, Aselefech Sorsa; Su, Wei-Nien; Haregewoin, Atetegeb Meazah; Chen, Hung-Ming; Cheng, Ju-Hsiang; Lin, Ming-Hsien; Wang, Chia-Hsin; Hwang, Bing-Joe

2018-05-09

The performance of lithium ion batteries rapidly falls at lower temperatures due to decreasing conductivity of electrolytes and Solid Electrolyte Interphase (SEI) on graphite anode. Hence, it limits the practical use of lithium ion batteries at sub-zero temperatures and also affects the development of lithium ion batteries for widespread applications. The SEI formed on the graphite surface is very influential in determining the performance of the battery. Herein, a new electrolyte additive, 4-Chloromethyl-1,3,2-dioxathiolane-2-oxide (CMDO), is prepared to improve the properties of commonly used electrolyte constituents - ethylene carbonate (EC), and fluoroethylene carbonate (FEC). The formation of an efficient passivation layer in propylene carbonate (PC) -based electrolyte for MCMB electrode was investigated. The addition of CMDO resulted in a much less irreversible capacity loss and induces thin SEI formation. However, the combination of the three additives played a key role to enhance reversible capacity of MCMB electrode at lower or ambient temperature. The electrochemical measurement analysis showed that the SEI formed from a mixture of the three additives gave better intercalation-deintercalation of lithium ions.

Structural basis of sodium–potassium exchange of a human telomeric DNA quadruplex without topological conversion

PubMed Central

Wang, Zi-Fu; Li, Ming-Hao; Hsu, Shang-Te Danny; Chang, Ta-Chau

2014-01-01

Understanding the mechanism of Na+/K+-dependent spectral conversion of human telomeric G-quadruplex (G4) sequences has been limited not only because of the structural polymorphism but also the lack of sufficient structural information at different stages along the conversion process for one given oligonucleotide. In this work, we have determined the topology of the Na+ form of Tel23 G4, which is the same hybrid form as the K+ form of Tel23 G4 despite the distinct spectral patterns in their respective nuclear magnetic resonance (NMR) and circular dichroism spectra. The spectral difference, particularly the well-resolved imino proton NMR signals, allows us to monitor the structural conversion from Na+ form to K+ form during Na+/K+ exchange. Time-resolved NMR experiments of hydrogen–deuterium exchange and hybridization clearly exclude involvement of the global unfolding for the fast Na+/K+ spectral conversion. In addition, the K+ titration monitored by NMR reveals that the Na+/K+ exchange in Tel23 G4 is a two-step process. The addition of K+ significantly stabilizes the unfolding kinetics of Tel23 G4. These results offer a possible explanation of rapid spectral conversion of Na+/K+ exchange and insight into the mechanism of Na+/K+ structural conversion in human telomeric G4s. PMID:24476914

Influence of prepreg characteristics on stamp consolidation

NASA Astrophysics Data System (ADS)

Slange, T. K.; Warnet, L. L.; Grouve, W. J. B.; Akkerman, R.

2017-10-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The development of automated lay-up technologies further extends the applicability of stamp forming by allowing rapid lay-up of tailored blanks and partial preconsolidation. This partial preconsolidation makes the influence of prepreg more critical compared to conventional preconsolidation methods which provide full preconsolidation. This paper aims to highlight consolidation challenges that can appear when stamp forming blanks manufactured by automated lay-up. Important prepreg characteristics were identified based on an experimental study where a comparison was made between various prepreg in their as-received, deconsolidated and stamp consolidated state. It was found that adding up small thickness variations across the width of a prepreg when stacking plies into a blank by automated lay-up can cause non-uniform consolidation. Additionally, deconsolidation of the prepreg does not seem to obstruct interlaminar bonding, while intralaminar voids initially present in a prepreg cannot be removed during stamp forming. An additional preconsolidation step after automated lay-up seems necessary to remove blank thickness variations and intralaminar voids for the current prepregs. Eliminating this process step and the successful combination of rapid automated lay-up and stamp forming requires prepregs which are void-free and have less thickness variation.

Article and method for making an article

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lacy, Benjamin Paul; Schick, David Edward; Kottilingam, Srikanth Chandrudu

An article and a method for making shaped cooling holes in an article are provided. The method includes the steps of depositing a metal alloy powder to form an initial layer including at least one aperture, melting the metal alloy powder with a focused energy source to transform the powder layer to a sheet of metal alloy, sequentially depositing an additional layer of the metal alloy powder to form a layer including at least one aperture corresponding to the at least one aperture in the initial layer, melting the additional layer of the metal alloy powder with the focused energymore » source to increase the sheet thickness, and repeating the steps of sequentially depositing and melting the additional layers of metal alloy powder until a structure including at least one aperture having a predetermined profile is obtained. The structure is attached to a substrate to make the article.« less

Additive manufacturing in production: challenges and opportunities

NASA Astrophysics Data System (ADS)

Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

2015-03-01

Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

Economically effective material forms for composites

NASA Astrophysics Data System (ADS)

Woolstencroft, Dave

This paper will consider advanced composites and the new degrees of freedom that are available to the composites engineer to be able to make parts that combine both an economic performance superior to existing systems, with no additional production investment, and high mechanical property translations. This unique advantage comes about through some pioneering and innovative work in the different forms of material into which the reinforcing fibers can be configured. The presentation will highlight the unique advantages and show a pioneering aerostructural application of this material form.

Prediction of Metabolic Flux Distribution from Gene Expression Data Based on the Flux Minimization Principle

DTIC Science & Technology

2014-11-14

problem. Modification of the PLOS ONE | www.plosone.org 1 November 2014 | Volume 9 | Issue 11 | e112524 Report Documentation Page Form ApprovedOMB No. 0704... Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 FBA algorithm to incorporate additional biological information from gene expression profiles is...We set the maximization of biomass production as the objective of FBA and implemented it in two different forms : without flux minimization (or

User's instructions for the GE cardiovascular model to simulate LBNP and tilt experiments, with graphic capabilities

NASA Technical Reports Server (NTRS)

1974-01-01

The present form of this cardiovascular model simulates both 1-g and zero-g LBNP (lower body negative pressure) experiments and tilt experiments. In addition, the model simulates LBNP experiments at any body angle. The model is currently accessible on the Univac 1110 Time-Shared System in an interactive operational mode. Model output may be in tabular form and/or graphic form. The graphic capabilities are programmed for the Tektronix 4010 graphics terminal and the Univac 1110.

2015 Summer Design Challenge: Team A&E (2241) Additively Manufactured Discriminator.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Sarah E.; Moore, Brandon James

Current discriminator designs are based on historical designs and traditional manufacturing methods. The goal of this project was to form non-traditional groups to create novel discriminator designs by taking advantage of additive manufacturing. These designs would expand current discriminator designs and provide insight on the applicability of additive manufacturing for future projects. Our design stretched the current abilities of additive manufacturing and noted desired improvements for the future. Through collaboration with NSC, we noted several additional technologies which work well with additive manufacturing such as topology optimization and CT scanning and determined how these technologies could be improved to bettermore » combine with additive manufacturing.« less

Raising the Reliability of Forming Rolls by Alloying Their Core with Copper

NASA Astrophysics Data System (ADS)

Zhizhkina, N. A.

2016-11-01

The mechanical properties and the structure of forming rolls from cast irons of different compositions are studied. A novel iron including a copper additive that lowers its chilling and raises the homogeneity of the structure is suggested for the roll cores. The use of such iron should raise the reliability of the rolls in operation.

78 FR 42125 - Self-Regulatory Organizations; The Options Clearing Corporation; Notice of Filing of an Advance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-15

... Connection With a Proposed Change to its Operations in the Form of a Private Offering by OCC of Senior... change its operations in the form of a private offering of senior unsecured debt securities (``Offering... would provide OCC with access to additional liquidity for working capital needs and general corporate...

Statistical Literacy as a Function of Online versus Hybrid Course Delivery Format for an Introductory Graduate Statistics Course

ERIC Educational Resources Information Center

Hahs-Vaughn, Debbie L.; Acquaye, Hannah; Griffith, Matthew D.; Jo, Hang; Matthews, Ken; Acharya, Parul

2017-01-01

Statistical literacy refers to understanding fundamental statistical concepts. Assessment of statistical literacy can take the forms of tasks that require students to identify, translate, compute, read, and interpret data. In addition, statistical instruction can take many forms encompassing course delivery format such as face-to-face, hybrid,…

Orderly Change in a Stable World: The Antisocial Trait as a Chimera.

ERIC Educational Resources Information Center

Patterson, Gerald R.

1993-01-01

Used longitudinal data from Oregon Youth Study to examine quantitative and qualitative change. Used latent growth models to demonstrate changes in form and systematic changes in mean level for subgroup of boys. Factor analyses carried out at three ages showed that, over time, changes in form and addition of new problems were quantifiable and thus…

Regulation of LPS-induced tissue factor expression in human monocytic THP-1 cells by curcumin

USDA-ARS?s Scientific Manuscript database

Tissue factor (TF) is a transmembrane receptor, which initiates thrombotic episodes associated with various diseases. In addition to membrane-bound TF, we have discovered an alternatively spliced form of human TF mRNA. It was later confirmed that this form of TF mRNA expresses a soluble protein circ...

8 CFR 204.309 - Factors requiring denial of a Form I-800A or Form I-800.

Code of Federal Regulations, 2012 CFR

2012-01-01

... arrest, conviction, or history of substance abuse, sexual abuse or child abuse, and/or family violence... additional member of the household concerning the arrest, conviction, or history of substance abuse, sexual abuse, child abuse, and/or family violence, or any other criminal history as an offender; the fact that...

8 CFR 204.309 - Factors requiring denial of a Form I-800A or Form I-800.

Code of Federal Regulations, 2011 CFR

2011-01-01

... arrest, conviction, or history of substance abuse, sexual abuse or child abuse, and/or family violence... additional member of the household concerning the arrest, conviction, or history of substance abuse, sexual abuse, child abuse, and/or family violence, or any other criminal history as an offender; the fact that...

High power density fuel cell comprising an array of microchannels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sopchak, David A; Morse, Jeffrey D; Upadhye, Ravindra S

2014-05-06

A phosphoric acid fuel cell according to one embodiment includes an array of microchannels defined by a porous electrolyte support structure extending between bottom and upper support layers, the microchannels including fuel and oxidant microchannels; fuel electrodes formed along some of the microchannels; and air electrodes formed along other of the microchannels. A method of making a phosphoric acid fuel cell according to one embodiment includes etching an array of microchannels in a substrate, thereby forming walls between the microchannels; processing the walls to make the walls porous, thereby forming a porous electrolyte support structure; forming anode electrodes along somemore » of the walls; forming cathode electrodes along other of the walls; and filling the porous electrolyte support structure with a phosphoric acid electrolyte. Additional embodiments are also disclosed.« less

Effect of CeLa addition on the microstructures and mechanical properties of Al-Cu-Mn-Mg-Fe alloy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Du, Jiandi

Development of high strength lithium battery shell alloy is highly desired for new energy automobile industry. The microstructures and mechanical properties of Al-Cu-Mn-Mg-Fe alloy with different CeLa additions were investigated through optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Rietveld refinement and tensile testing. Experimental results indicate that Al{sub 8}Cu{sub 4}Ce and Al{sub 6}Cu{sub 6}La phases formed due to CeLa addition. Addition of 0.25 wt.% CeLa could promote the formation of denser precipitation of Al{sub 20}Cu{sub 2}Mn{sub 3} and Al{sub 6}(Mn, Fe) phases, which improved the mechanical properties of the alloy at room temperature.more » However, up to 0.50 wt.% CeLa addition could promote the formation of coarse Al{sub 8}Cu{sub 4}Ce phase, Al{sub 6}Cu{sub 6}La phase and Al{sub 6}(Mn, Fe) phase, which resulted in weakened mechanical properties. - Highlights: •Al-Cu-Mn-Mg-Fe alloys with different CeLa addition were fabricated through casting and rolling. •Al{sub 8}Cu{sub 4}Ce and Al{sub 6}Cu{sub 6}La phases formed after CeLa addition. •Addition of 0.25 wt.% CeLa promoted formation of denser precipitates of Al{sub 20}Cu{sub 2}Mn{sub 3} and Al{sub 6}(Mn, Fe). •Mechanical properties of the alloy was improved after 0.25 wt.% CeLa addition.« less

Thermally-prepared polymorphic forms of cilostazol.

PubMed

Stowell, Grayson W; Behme, Robert J; Denton, Stacy M; Pfeiffer, Inigo; Sancilio, Frederick D; Whittall, Linda B; Whittle, Robert R

2002-12-01

Prior to this study, cilostazol, an antithrombotic drug, was thought to exist as a single crystalline phase with a melting point of approximately 159 degrees C (Form A). On cooling, melts often form a glass that, when heated, may crystallize as additional crystalline polymorphic forms. Cilostazol, when reheated, subsequently forms polymorphs that melt at approximately 136 degrees C (Form B) and 146 degrees C (Form C). Free-energy temperature diagrams estimated from calorimetry data reveal that each pair of the cilostazol polymorphs (A-B, B-C, and A-C) is monotropic. Essentially pure samples of suitable crystalline shape and size permitted single crystal structural analysis of Forms A and C. Theoretical solubility ratios calculated using calorimetry data indicate that at 37 degrees C, Form B should be more than four times more soluble and Form C should be more than two times more soluble than Form A. Forms B and C could not be crystallized from solvents. Metastable forms from super cooled melts analyzed by intrinsic dissolution and Fourier transform-Raman experiments demonstrated that Forms B and C undergo a rapid, solvent-mediated recrystallization to Form A, making dissolution rate measurements difficult. Copyright 2002 Wiley-Liss, Inc. and the American Pharmaceutical Association J Pharm Sci 91:2481-2488, 2002

Autonomous replication and addition of telomerelike sequences to DNA microinjected into Paramecium tetraurelia macronuclei.

PubMed Central

Gilley, D; Preer, J R; Aufderheide, K J; Polisky, B

1988-01-01

Paramecium tetraurelia can be transformed by microinjection of cloned serotype A gene sequences into the macronucleus. Transformants are detected by their ability to express serotype A surface antigen from the injected templates. After injection, the DNA is converted from a supercoiled form to a linear form by cleavage at nonrandom sites. The linear form appears to replicate autonomously as a unit-length molecule and is present in transformants at high copy number. The injected DNA is further processed by the addition of paramecium-type telomeric sequences to the termini of the linear DNA. To examine the fate of injected linear DNA molecules, plasmid pSA14SB DNA containing the A gene was cleaved into two linear pieces, a 14-kilobase (kb) piece containing the A gene and flanking sequences and a 2.2-kb piece consisting of the procaryotic vector. In transformants expressing the A gene, we observed that two linear DNA species were present which correspond to the two species injected. Both species had Paramecium telomerelike sequences added to their termini. For the 2.2-kb DNA, we show that the site of addition of the telomerelike sequences is directly at one terminus and within one nucleotide of the other terminus. These results indicate that injected procaryotic DNA is capable of autonomous replication in Paramecium macronuclei and that telomeric addition in the macronucleus does not require specific recognition sequences. Images PMID:3211128

AMMONIUM DIURANATE PRECIPITATION WITH ANHYDROUS AMMONIA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, L.C.; Grill, L.F.

1959-03-01

Ammonium diuranate has been precipitated from nitric acid solutions by the addition of anhydrpus ammonia on both laboratory and production scales. This process produced more dense and morc rapidly filtered precipitates than those formed by the addition of aqueous amonia or slurried calcium hydroxide. Thc filtrates from the anhydrous ammonia process were lower in uranium content than those obtained by the addition of the other reagents. Processing equipment and precipitate characteristics are discussed. (auth)

Improvements to the strength and corrosion resistance of aluminum-magnesium-manganese alloys of near-AA5083 chemistry

NASA Astrophysics Data System (ADS)

Carroll, Mark Christopher

Aluminum alloys of the 5000 series (AI-Mg-Mn) are extremely popular in a wide range of applications that call for a balance of moderately high strength, good corrosion resistance, and light weight, all at a moderate cost. One of the most popular 5000 series alloys is designated A1-5083, containing, in addition to aluminum, approximately 4 wt% magnesium and 0.7 wt% manganese. In order to increase the range of versatility of this particular alloy, a number of modifications have been examined that will potentially improve the strength and corrosion resistance characteristics while maintaining a chemical composition that is very close to the proven 5083 alloy. The strength of the 5083-based alloys under study are investigated with two goals in mind---to maximize the potential strength characteristics in a "standard" 5083 form through changes in minor processing parameters or through minor alloying additions. Increasing the standard alloy's potential is possible through improved efficiency of "preprocessing" heat treatments that maximize the homogeneous dispersion of secondary manganese-based particles. For the modified alloy study, additions of scandium and zirconium are shown to improve strength not only by forming secondary particles in the alloy, but also through substitutional solid solution strengthening, even when added at very small levels. Corrosion resistance of these 5083-based alloys is investigated once again through minor alloying additions; specifically zinc, copper, and silver. Zinc is particularly effective in that it changes the corrosion-susceptible binary aluminum-magnesium phase that would otherwise form on grain boundaries following exposure to moderately elevated temperatures for extended periods of time to a ternary aluminum-magnesium-zinc phase. This chemical composition of this ternary phase that forms following zinc additions can be further altered through minor additions of copper and silver. By determining threshold levels for these modifications while maintaining a chemical composition that is very near that of standard Al-5083, it can be shown that even minor modifications to processing and alloying parameters can have a favorable effect on the final bulk properties of the alloy. The increased range of strength and corrosion resistance of these lightly modified alloys make them more attractive in a broadened range of potential applications.

Lithium Dinitramide as an Additive in Lithium Power Cells

NASA Technical Reports Server (NTRS)

Gorkovenko, Alexander A.

2007-01-01

Lithium dinitramide, LiN(NO2)2 has shown promise as an additive to nonaqueous electrolytes in rechargeable and non-rechargeable lithium-ion-based electrochemical power cells. Such non-aqueous electrolytes consist of lithium salts dissolved in mixtures of organic ethers, esters, carbonates, or acetals. The benefits of adding lithium dinitramide (which is also a lithium salt) include lower irreversible loss of capacity on the first charge/discharge cycle, higher cycle life, lower self-discharge, greater flexibility in selection of electrolyte solvents, and greater charge capacity. The need for a suitable electrolyte additive arises as follows: The metallic lithium in the anode of a lithium-ion-based power cell is so highly reactive that in addition to the desired main electrochemical reaction, it engages in side reactions that cause formation of resistive films and dendrites, which degrade performance as quantified in terms of charge capacity, cycle life, shelf life, first-cycle irreversible capacity loss, specific power, and specific energy. The incidence of side reactions can be reduced through the formation of a solid-electrolyte interface (SEI) a thin film that prevents direct contact between the lithium anode material and the electrolyte. Ideally, an SEI should chemically protect the anode and the electrolyte from each other while exhibiting high conductivity for lithium ions and little or no conductivity for electrons. A suitable additive can act as an SEI promoter. Heretofore, most SEI promotion was thought to derive from organic molecules in electrolyte solutions. In contrast, lithium dinitramide is inorganic. Dinitramide compounds are known as oxidizers in rocket-fuel chemistry and until now, were not known as SEI promoters in battery chemistry. Although the exact reason for the improvement afforded by the addition of lithium dinitramide is not clear, it has been hypothesized that lithium dinitramide competes with other electrolyte constituents to react with lithium on the surface of the anode to form a beneficial SEI. Apparently, nitrides and oxides that result from reduction of lithium dinitramide on the anode produce a thin, robust SEI different from the SEIs formed from organic SEI promoters. The SEI formed from lithium dinitramide is more electronically insulating than is the film formed in the presence of an otherwise identical electrolyte that does not include lithium dinitramide. SEI promotion with lithium dinitramide is useful in batteries with metallic lithium and lithium alloy anodes.

32 CFR 644.343 - Additional data for clearance with the committees.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Additional data for clearance with the committees. 644.343 Section 644.343 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... history of acquisition, development, and disposal, if not included in ENG Form 2187-R. Include official...

32 CFR 644.343 - Additional data for clearance with the committees.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Additional data for clearance with the committees. 644.343 Section 644.343 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... history of acquisition, development, and disposal, if not included in ENG Form 2187-R. Include official...

Ten year performance of asphalt additive test sections : Lave Butte - Fremont Highway Junction Section, The Dalles - California Highway (US#97), Deschutes County, Oregon.

DOT National Transportation Integrated Search

1998-09-01

The durability of hot mix asphalt concrete (HMAC) overlays is important to the Oregon Department of Transportation (ODOT), as this is the most common form of surface rehabilitation on state roads. To see if several HMAC additives available in Oregon ...

Process for lowering the dielectric constant of polyimides using diamic acid additives

NASA Technical Reports Server (NTRS)

Stoakley, Diane M. (Inventor); St.clair, Anne K. (Inventor)

1990-01-01

Linear aromatic polyimides with low dielectric constants are produced by adding a diamic acid additive to the polyamic acid resin formed by the condensation of an aromatic dianhydride with an aromatic diamine. The resulting modified polyimide is a better electrical insulator than state-of-the-art commercially available polyimides.

The Impact of Investments in Additional Preparation on Unified State Exam Results

ERIC Educational Resources Information Center

Prakhov, Ilya Arkadyevich

2015-01-01

The paper proposes a model of educational strategies for college entrants that makes it possible to assess the investment efficiency in additional preparation as evidenced by the Unified State Exam [USE] scores. It was found that college entrants still use traditional forms of preparation despite the new institutional admission conditions at…

Polyvinyl pyridine microspheres

NASA Technical Reports Server (NTRS)

Rembaum, Alan (Inventor); Gupta, Amitava (Inventor); Volksen, Willi (Inventor)

1980-01-01

Microspheres are produced by cobalt gamma radiation initiated polymerization of a dilute aqueous vinyl pyridine solution. Addition of cross-linking agent provides higher surface area beads. Addition of monomers such as hydroxyethylmethacrylate acrylamide or methacrylamide increases hydrophilic properties and surface area of the beads. High surface area catalytic supports are formed in the presence of controlled pore glass substrate.

Polyvinyl pyridine microspheres

NASA Technical Reports Server (NTRS)

Rembaum, Alan (Inventor); Gupta, Amitava (Inventor); Volksen, Willi (Inventor)

1979-01-01

Microspheres are produced by cobalt gamma radiation initiated polymerization of a dilute aqueous vinyl pyridine solution. Addition of cross-linking agent provides higher surface area beads. Addition of monomers such as hydroxyethylmethacrylate acrylamide or methacrylamide increases hydrophilic properties and surface area of the beads. High surface area catalytic supports are formed in the presence of controlled pore glass substrate.

Is adermatoglyphia an additional feature of Kindler Syndrome?*

PubMed Central

de Almeida Jr, Hiram Larangeira; Goetze, Fernanda Mendes; Fong, Kenneth; Lai-Cheong, Joey; McGrath, John

2015-01-01

A typical feature of Kindler Syndrome is skin fragility; this condition in currently classified as a form of epidermolysis bullosa. We describe a rarely reported feature of two cases, one sporadic and one familial; both patients noticed acquired adermatoglyphia. The loss of dermatoglyphics could be an additional feature of this syndrome. PMID:26375235

Children's Understanding of Addition and Subtraction Concepts

ERIC Educational Resources Information Center

Robinson, Katherine M.; Dube, Adam K.

2009-01-01

After the onset of formal schooling, little is known about the development of children's understanding of the arithmetic concepts of inversion and associativity. On problems of the form a+b-b (e.g., 3+26-26), if children understand the inversion concept (i.e., that addition and subtraction are inverse operations), then no calculations are needed…

Transport of phosphocholine in higher plant cells: sup 31 P nuclear magnetic resonance studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gout, E.; Bligny, R.; Roby, C.

1990-06-01

Phosphocholine (PC) is an abundant primary form of organic phosphate that is transported in plant xylem sap. Addition of PC to the perfusate of compressed P{sub i}-starved sycamore cells monitored by {sup 31}P NMR spectroscopy resulted in an accumulation of PC and all the other phosphate esters in the cytoplasmic compartment. Addition of hemicholinium-3, an inhibitor of choline uptake, to the perfusate inhibited PC accumulation but not inorganic phosphate (P{sub i}). When the P{sub i}-starved cells were perfused with a medium containing either P{sub i} or PC, the resulting P{sub i} distribution in the cell was the same. Addition ofmore » choline instead of PC to the perfusate of compressed cells resulted in an accumulation of PC in the cytoplasmic compartment from choline kinase activity. In addition, PC phosphatase activity has been discovered associated with the cell wall. These results indicate that PC was rapidly hydrolyzed outside the cell and that choline and P{sub i} entered the cytosolic compartment where choline kinase re-forms PC.« less

Diastereoselective addition of Grignard reagents to α-epoxy N-sulfonyl hydrazones

NASA Astrophysics Data System (ADS)

Uteuliyev, Maulen M.; Nguyen, Thien T.; Coltart, Don M.

2015-12-01

The α-alkylation of ketones and their derivatives by the addition of their corresponding enolates to alkyl halides is a fundamental synthetic transformation, but its utility is limited because the key bond-forming step proceeds in a bimolecular nucleophilic substitution fashion. Here we describe how an umpolung strategy that involves the addition of Grignard reagents to α-epoxy N-sulfonyl hydrazones—directed by the alkoxide of the 1-azo-3-alkoxy propenes formed in situ via base-induced ring opening of the epoxide—leads to the syn-selective production of α-alkyl-β-hydroxy N-sulfonyl hydrazones with α-quaternary centres. This transformation is remarkable in its ability to incorporate an unprecedented range of carbon-based substituents, which include primary, secondary and tertiary alkyl, as well as alkenyl, aryl, allenyl and alkynyl groups. Subsequent hydrolysis of the β-hydroxy N-sulfonyl hydrazone products produces the corresponding β-hydroxy ketones. In addition to hydrolysis, the hydrazone products are poised to undergo numerous different known synthetic transformations via well-established chemistry, which would provide access to a wide array of useful structures.

Effects of Quartz Particle Size and Sucrose Addition on Melting Behavior of a Melter Feed for High-Level Waste Glass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marcial, Jose; Hrma, Pavel R; Schweiger, Michael J

2010-08-11

The behavior of melter feed (a mixture of nuclear waste and glass-forming additives) during waste-glass processing has a significant impact on the rate of the vitrification process. We studied the effects of silica particle size and sucrose addition on the volumetric expansion (foaming) of a high-alumina feed and the rate of dissolution of silica particles in feed samples heated at 5°C/min up to 1200°C. The initial size of quartz particles in feed ranged from 5 to 195 µm. The fraction of the sucrose added ranged from 0 to 0.20 g per g glass. Extensive foaming occurred only in feeds withmore » 5-μm quartz particles; particles >150 µm formed clusters. Particles of 5 µm completely dissolved by 900°C whereas particles >150 µm did not fully dissolve even when the temperature reached 1200°C. Sucrose addition had virtually zero impact on both foaming and the dissolution of silica particles.« less

Constructing Efficient and Stable Perovskite Solar Cells via Interconnecting Perovskite Grains.

PubMed

Hou, Xian; Huang, Sumei; Ou-Yang, Wei; Pan, Likun; Sun, Zhuo; Chen, Xiaohong

2017-10-11

A high-quality perovskite film with interconnected perovskite grains was obtained by incorporating terephthalic acid (TPA) additive into the perovskite precursor solution. The presence of TPA changed the crystallization kinetics of the perovskite film and promoted lateral growth of grains in the vicinity of crystal boundaries. As a result, sheet-shaped perovskite was formed and covered onto the bottom grains, which made some adjacent grains partly merge together to form grains-interconnected perovskite film. Perovskite solar cells (PSCs) with TPA additive exhibited a power conversion efficiency (PCE) of 18.51% with less hysteresis, which is obviously higher than that of pristine cells (15.53%). PSCs without and with TPA additive retain 18 and 51% of the initial PCE value, respectively, aging for 35 days exposed to relative humidity 30% in air without encapsulation. Furthermore, MAPbI 3 film with TPA additive shows superior thermal stability to the pristine one under 100 °C baking. The results indicate that the presence of TPA in perovskite film can greatly improve the performance of PSCs as well as their moisture resistance and thermal stability.

Additives for high-temperature liquid lubricants

NASA Technical Reports Server (NTRS)

Lawton, Emil A.; Yavrouian, Andre H.; Repar, John

1988-01-01

A preliminary research program was conducted to demonstrate a new concept for additives to liquid lubricants. It was demonstrated that suspensions of o-phthalonitrile and a substituted 1,2-maleonitrile in mineral oil and dilute solutions of o-phthalonitrile and tetrafluoro-o-phthalonitrile extended the lifetime of bearings under boundary lubricating conditions. The solutions exhibited coefficients of friction under high loads of 0.02-0.03. These results were consistent with the hypothesis that these compounds react with the hot metal surface to form a planar lubricating film by means of a metal or metal oxide template reaction. Also, the adherence was very strong due to the chelating action of the planar macrocycles postulated to form under the experimental conditions.

Method for simultaneous use of a single additive for coal flotation, dewatering, and reconstitution

DOEpatents

Wen, Wu-Wey; Gray, McMahan L.; Champagne, Kenneth J.

1995-01-01

A single dose of additive contributes to three consecutive fine coal unit operations, i.e., flotation, dewatering and reconstitution, whereby the fine coal is first combined with water in a predetermined proportion so as to formulate a slurry. The slurry is then mixed with a heavy hydrocarbon-based emulsion in a second predetermined proportion and at a first predetermined mixing speed and for a predetermined period of time. The conditioned slurry is then cleaned by a froth flotation method to form a clean coal froth and then the froth is dewatered by vacuum filtration or a centrifugation process to form reconstituted products that are dried to dust-less clumps prior to combustion.

The effect of temperature and addition of reducing agent on sodium stannate preparation from cassiterite by the alkaline roasting process

NASA Astrophysics Data System (ADS)

Lalasari, Latifa Hanum; Andriyah, Lia; Arini, Tri; Firdiyono, F.

2018-04-01

Sodium stannate is an intermediate compound with the formula Na2SnO3. This compound is easily dissolved in water and has many applications in the electroplating industry, tin alloy production, and catalysts for organic synthesis. In this occasion was investigated the effect of temperature and the addition of reducing agent on making of sodium stannate phase from cassiterite by an alkaline roasting process using sodium carbonate (Na2CO3). Firstly, cassiterite was roasted at 700 °C for 3 hours and continued leaching process using 10% HCl solution at 110 °C for 2 hours. The cassiterite residue than was dried at 110 °C and mixed homogenously with a Na2CO3 decomposer at a mass ratio Na2CO3/cassiterite as 5:3 for the decomposition process. It was done by variation temperatures (300 °C, 700 °C, 800 °C, 870 °C, 900 °C) for 3 hours, variation times (3, 4, 5 hours) at a roasting temperature of 700 °C and addition of reducing agent such as sub-bituminous coal. The result of the experiment shows that cassiterite prepared by roasting and acid leaching process has the chemical composition as follows: 59.98% Sn, 22.58% O, 3.20% Ce, 3.15% La, 2.57% Nd, 1.67% Ti, 1.56% Fe, 1.24% P, 0.62% Ca and others. The Na2SnO3 phase begins to form at a roasting temperature of 870 °C for 3 hours. Although the roasting times was extended from 3 hours to 5 hours at 700 °C, the Na2SnO3 phase also has not yet formed. In other conditions, the addition of coal reducing agent to the roasting process would cause formations of Sn metal besides Na2SnO3 phase at 870 °C. At temperatures lower than 870 °C, the addition of coal only forms Sn metal, whereas the sodium stannate phase is not formed.

2,5-Dimethyl-4-hydroxy-3(2H)-furanone as a secondary metabolite from D-fructose-1,6-diphosphate metabolism by Zygosaccharomyces rouxii.

PubMed

Dahlen, T; Hauck, T; Wein, M; Schwab, W

2001-01-01

2,5-Dimethyl-4-hydroxy-3(2H)-furanone (DMHF) is an important aroma compound found in many fruits such as strawberries and pineapples and it is also produced by the soy-sauce-fermenting yeast Zygosaccharomyces rouxii after the addition of d-fructose-1,6-diphosphate to yeast-peptone-dextrose nutrient media. Dilute DMHF solutions exhibit a strawberry-like flavor while DMHF concentrates have a caramel-like aroma. In media containing D-fructose-1,6-diphosphate as the sole carbon source, growth of Z. rouxii and formation of DMHF were not observed. Although Z. rouxii cells grew in media with D-glucose as the sole carbon source, DMHF was only produced when media were supplemented with D-fructose-1,6-diphosphate. The DMHF concentration always correlated with the yeast cell count and D-fructose-1,6-diphosphate concentration. Addition of CaCl2 (up to 50 g.l(-1)) led to a higher DMHF concentration. Addition of Na2SO3 reduced the growth of Z. rouxii and inhibited DMHF formation. The amount of DMHF formed by Z. rouxii was not significantly affected by the addition of KH2PO4. DMHF concentrations of 5 and 10 g.l(-1) partially and completely inhibited the growth of Z. rouxii cells, respectively. Only the singly labeled furanone was formed after the addition of 1-13C-D-fructose-1,6-diphosphate to the medium. However, unlabeled DMHF was formed in the presence of (13)C(6)-D-glucose. Therefore, the carbons of the furanone originate exclusively from exogenously supplied D-fructose-1,6-diphosphate as no exchange with the internal pool of D-fructose-1,6-diphosphate occurs. This implies that DMHF is a secondary metabolite of Z. rouxii formed from D-fructose-1,6-diphosphate. We assume that at least the first step of the metabolism of D-fructose-1,6-diphosphate takes place in the cell wall or membrane of the yeast.

Comparative Emulsifying Properties of Octenyl Succinic Anhydride (OSA)-Modified Starch: Granular Form vs Dissolved State

PubMed Central

Marefati, Ali; Gutiérrez, Gemma; Wahlgren, Marie; Rayner, Marilyn

2016-01-01

The emulsifying ability of OSA-modified and native starch in the granular form, in the dissolved state and a combination of both was compared. This study aims to understand mixed systems of particles and dissolved starch with respect to what species dominates at droplet interfaces and how stability is affected by addition of one of the species to already formed emulsions. It was possible to create emulsions with OSA-modified starch isolated from Quinoa as sole emulsifier. Similar droplet sizes were obtained with emulsions prepared at 7% (w/w) oil content using OSA-modified starch in the granular form or molecularly dissolved but large differences were observed regarding stability. Pickering emulsions kept their droplet size constant after one month while emulsions formulated with OSA-modified starch dissolved exhibited coalescence. All emulsions stabilized combining OSA-modified starch in granular form and in solution showed larger mean droplet sizes with no significant differences with respect to the order of addition. These emulsions were unstable due to coalescence regarding presence of free oil. Similar results were obtained when emulsions were prepared by combining OSA-modified granules with native starch in solution. The degree of surface coverage of starch granules was much lower in presence of starch in solution which indicates that OSA-starch is more surface active in the dissolved state than in granular form, although it led to unstable systems compared to starch granule stabilized Pickering emulsions, which demonstrated to be extremely stable. PMID:27479315

Electrochemical slurry compositions and methods for preparing the same

DOEpatents

Doherty, Tristan; Limthongkul, Pimpa; Butros, Asli; Duduta, Mihai; Cross, III, James C.

2016-11-01

Embodiments described herein generally relate to semi-solid suspensions, and more particularly to systems and methods for preparing semi-solid suspensions for use as electrodes in electrochemical devices such as, for example batteries. In some embodiments, a method for preparing a semi-solid electrode includes combining a quantity of an active material with a quantity of an electrolyte to form an intermediate material. The intermediate material is then combined with a conductive additive to form an electrode material. The electrode material is mixed to form a suspension having a mixing index of at least about 0.80 and is then formed into a semi-solid electrode.

Controlled release liquid dosage formulation

DOEpatents

Benton, Ben F.; Gardner, David L.

1989-01-01

A liquid dual coated dosage formulation sustained release pharmaceutic having substantial shelf life prior to ingestion is disclosed. A dual coating is applied over controlled release cores to form dosage forms and the coatings comprise fats melting at less than approximately 101.degree. F. overcoated with cellulose acetate phthalate or zein. The dual coated dosage forms are dispersed in a sugar based acidic liquid carrier such as high fructose corn syrup and display a shelf life of up to approximately at least 45 days while still retaining their release profiles following ingestion. Cellulose acetate phthalate coated dosage form cores can in addition be dispersed in aqueous liquids of pH <5.

Obstacles to condom use: the combination of other forms of birth control and short-term monogamy.

PubMed

Critelli, J W; Suire, D M

1998-03-01

Two hundred thirty-seven college students involved in heterosexual relationships were surveyed to determine the effects of relationship type and use of forms of contraception other than condoms on condom use. Findings indicated that in the context of a short-term, monogamous relationship, the use of another form of birth control was associated with decreased condom use. In addition, 20% of the participants reported that they had wanted to use a condom for disease prevention on at least one occasion but had decided not to do so because they were using another form of contraception. Implications for preventive health are discussed.

New Evidence for the Presence of Indigenous Microfossils in Carbonaceous Chondrites

NASA Technical Reports Server (NTRS)

Hoover, Richard B.; Rozanov, Alexei Yu.

2004-01-01

We present additional evidence for the presence of indigenous microfossils in carbonaceous meteorites scanning electron micrograph studies of freshly fractured interior surfaces of pristine samples of the Murchison CM2 carbonaceous meteorite have revealed forms in-situ that are recognizable as biofilms as well as complex and highly structured forms similar to calcareous and siliceous microfossils. Some of the forms encountered are very well-preserved and exhibit complex associated microstructures similar to bacterial flagella. New images will be presented of forms recently encountered in carbonaceous meteorites and they will be compared with those of known microbial extremophiles. KEYWORDS: carbonaceous chondrites, Murchison, microfossils, extremophiles

Reactions of atomic oxygen with the chlorate ion and the perchlorate ion

NASA Astrophysics Data System (ADS)

Anan'ev, Vladimir; Miklin, Mikhail; Kriger, Ludmila

2014-06-01

The reactions of the chlorate ion with atomic oxygen formed under photolysis of the nitrate ion introduced to potassium chlorate crystal by co-crystallization were studied by optical and infrared absorption spectroscopy. The perchlorate ion was found to form in solids as product of addition reaction of singlet atomic oxygen, formed under dissociation of the peroxynitrite ion - the product of isomerization of the excited nitrate ion. Triplet atomic oxygen does not react with the chlorate ion. The atomic oxygen formed under photolysis of the nitrate ion introduced to potassium perchlorate crystal by co-crystallization does not react with the perchlorate ion.

Spray Drying as a Reliable Route to Produce Metastable Carbamazepine Form IV.

PubMed

Halliwell, Rebecca A; Bhardwaj, Rajni M; Brown, Cameron J; Briggs, Naomi E B; Dunn, Jaclyn; Robertson, John; Nordon, Alison; Florence, Alastair J

2017-07-01

Carbamazepine (CBZ) is an active pharmaceutical ingredient used in the treatment of epilepsy that can form at least 5 polymorphic forms. Metastable form IV was originally discovered from crystallization with polymer additives; however, it has not been observed from subsequent solvent-only crystallization efforts. This work reports the reproducible formation of phase pure crystalline form IV by spray drying of methanolic CBZ solution. Characterization of the material was carried out using diffraction, scanning electron microscopy, and differential scanning calorimetry. In situ Raman spectroscopy was used to monitor the spray-dried product during the spray drying process. This work demonstrates that spray drying provides a robust method for the production of form IV CBZ, and the combination of high supersaturation and rapid solid isolation from solution overcomes the apparent limitation of more traditional solution crystallization approaches to produce metastable crystalline forms. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.