The ultrahigh precision form measurement of small, steep-sided aspheric moulds, incorporating novel hardware and software developments; Technical Digest

NASA Astrophysics Data System (ADS)

Mills, M. W.; Hutchinson, Matthew J.

2005-05-01

A variety of consumer applications, eg cellphone camera lenses, optical storage devices, digital cameras, etc, are driving the demand for small, high aspheric departure rotationally-symmetric moulded optics, manufactured both in polymer and glass materials. The mould tools for such components are manufactured by ultra-high precision techniques such as single point diamond turning and ultra-precision grinding, and must be accurate to <1/10μm levels for form, and exhibit nanometric surface finish quality. The aspheric forms of such components' optical surfaces exhibit high departure from best-fit sphere towards their outer edge, which renders this outer region especially critical for optical performance. The high slope of these components at the clear aperture has caused some restrictions on the use of profilometry in the measurement of form across their full diameter. Taylor Hobson designs and manufactures a range of ultra-precision profilometers for use in such industries as aspheric optics fabrication. In order to address the issues described, a new measurement system, Taylor Hobson Form Talysurf PGI 1250, has been developed, which contains new Aspheric Data Fusion Software, as well as Asphero-Diffractive Analysis Software, allowing the entire diametric profile to be analysed to the desired level of accuracy. This development removes the previous limitation of maximum slope for this type of measurement, thus enabling better quality control of high slope, high aspheric departure optics. Measurement data from the Form Talysurf PGI 1250 can be fed back directly to the machine tool, in order to optimize the form of the optical mould.

The ultrahigh precision form measurement of small, steep-sided aspheric moulds, incorporating novel hardware and software developments; Technical Digest

NASA Astrophysics Data System (ADS)

Mills, M. W.; Hutchinson, Matthew J.

2005-05-01

A variety of consumer applications, eg cellphone camera lenses, optical storage devices, digital cameras, etc, are driving the demand for small, high aspheric departure rotationally-symmetric moulded optics, manufactured both in polymer and glass materials. The mould tools for such components are manufactured by ultra-high precision techniques such as single point diamond turning and ultra-precision grinding, and must be accurate to <1/10μm levels for form, and exhibit nanometric surface finish quality. The aspheric forms of such components" optical surfaces exhibit high departure from best-fit sphere towards their outer edge, which renders this outer region especially critical for optical performance. The high slope of these components at the clear aperture has caused some restrictions on the use of profilometry in the measurement of form across their full diameter. Taylor Hobson designs and manufactures a range of ultra-precision profilometers for use in such industries as aspheric optics fabrication. In order to address the issues described, a new measurement system, Taylor Hobson Form Talysurf PGI 1250, has been developed, which contains new Aspheric Data Fusion Software, as well as Asphero-Diffractive Analysis Software, allowing the entire diametric profile to be analysed to the desired level of accuracy. This development removes the previous limitation of maximum slope for this type of measurement, thus enabling better quality control of high slope, high aspheric departure optics. Measurement data from the Form Talysurf PGI 1250 can be fed back directly to the machine tool, in order to optimize the form of the optical mould.

Template-Growth of Highly Ordered Carbon Nanotube Arrays on Silicon POSTPRINT

DTIC Science & Technology

2006-09-01

packed uni- form CNTs that are spatially isolated from each other is to use a growth template. Highly ordered anodic aluminum oxide ( AAO ) template can...process for evaporating thick aluminum of high quality and good adhesion. 15. SUBJECT TERMS Anodic Aluminum Oxide Template, Carbon Nanotubes (CNTs...within the highly ordered nanopores of an alumina oxide template, which is in turn formed on silicon through anodization of aluminum of unprecedented

Growth of high quality germanium films on patterned silicon substrates and applications

NASA Astrophysics Data System (ADS)

Vanamu, Ganesh

The principal objective of this work is to determine optimal pattern structures for highest quality (defect free) heteroepitaxial growth. High quality films of Ge on Si are of significant importance and can be used in high electron mobility devices, photodetectors for optical communications (1.3mum or 1.55mum) and integrating III-V optoelectronic devices. However, a 4% lattice mismatch and ˜ 50% thermal expansion mismatch between Ge and Si create three major challenges in growing high quality Ge films on Si, (a) high surface roughness due to a pronounced <110> crosshatch pattern, (b) high dislocation densities in Ge films and (c) high density of microcracks and wafer bending. A common way of reducing lattice and thermal expansion mismatch is to form a "virtual substrate (VS)" by growing a graded composition followed by a uniform layer of the desired epitaxial film on a defect-free Si substrate. Virtual graded layers could not decrease the dislocation densities to the numbers acceptable for most of the devices. Mathews et al. first proposed that limiting the lateral dimensions of the sample prior to growth could reduce the dislocation density. Later On Fitzgerald proposed that patterning decreases the dislocation density in the films. In this work we show high quality crosshatch-free Ge films with dislocation density ˜ 105 cm-2 on the nano-patterned Si and also high quality GaAs films on the Ge/Si virtual substrate. The first step in this research was to perform a systematic study to identify the role of pattern width on the quality of Ge growth. We investigated micrometer and submicrometer scale patterns. We demonstrated that the quality of the heteroepitaxial layers improves as the pattern width decreases. Then we have decreased the pattern width to nanometer-scale dimensions. Significant improvement of the Ge film quality was observed. We used novel interferometric lithography techniques combined with reactive ion and wet chemical etching to fabricate Si structures. The patterning was done using standard photomask based lithography. We analyzed the quality of the Ge films using high resolution x-ray diffraction, TEM and SEM. We performed etch pit density (EPD) measurements by counting the pits formed using a Nomarski optical microscope. In order to correlate characterization with device performance, we designed an inter-digitated pattern to form Ge based metal semiconductor metal photodetector and measured the photoresponse of the Ge films. Preliminary results were very promising. We then grew 4 mum GaAs on the Ge/Si using MBE (0.5 mum/hr and 570°C) and analyzed the GaAs film quality. We also performed modeling to calculate strain energy density and wafer bending in multi-layer films grown epitaxially on planar Si substrates. We have also compared the models with experiments. (Abstract shortened by UMI.)

Numerical analysis of the flexible roll forming of an automotive component from high strength steel

NASA Astrophysics Data System (ADS)

Abeyrathna, B.; Abvabi, A.; Rolfe, B.; Taube, R.; Weiss, M.

2016-11-01

Conventional roll forming is limited to components with uniform cross-section; the recently developed flexible roll forming (FRF) process can be used to form components which vary in both width and depth. It has been suggested that this process can be used to manufacture automotive components from Ultra High Strength Steel (UHSS) which has limited tensile elongation. In the flexible roll forming process, the pre-cut blank is fed through a set of rolls; some rolls are computer-numerically controlled (CNC) to follow the 3D contours of the part and hence parts with a variable cross-section can be produced. This paper introduces a new flexible roll forming technique which can be used to form a complex shape with the minimum tooling requirements. In this method, the pre-cut blank is held between two dies and the whole system moves back and forth past CNC forming rolls. The forming roll changes its angle and position in each pass to incrementally form the part. In this work, the process is simulated using the commercial software package Copra FEA. The distribution of total strain and final part quality are investigated as well as related shape defects observed in the process. Different tooling concepts are used to improve the strain distribution and hence the part quality.

A study with ESI PAM-STAMP® on the influence of tool deformation on final part quality during a forming process

NASA Astrophysics Data System (ADS)

Vrolijk, Mark; Ogawa, Takayuki; Camanho, Arthur; Biasutti, Manfredi; Lorenz, David

2018-05-01

As a result from the ever increasing demand to produce lighter vehicles, more and more advanced high-strength materials are used in automotive industry. Focusing on sheet metal cold forming processes, these materials require high pressing forces and exhibit large springback after forming. Due to the high pressing forces deformations occur in the tooling geometry, introducing dimensional inaccuracies in the blank and potentially impact the final springback behavior. As a result the tool deformations can have an impact on the final assembly or introduce cosmetic defects. Often several iterations are required in try-out to obtain the required tolerances, with costs going up to as much as 30% of the entire product development cost. To investigate the sheet metal part feasibility and quality, in automotive industry CAE tools are widely used. However, in current practice the influence of the tool deformations on the final part quality is generally neglected and simulations are carried out with rigid tools to avoid drastically increased calculation times. If the tool deformation is analyzed through simulation it is normally done at the end of the drawing prosses, when contact conditions are mapped on the die structure and a static analysis is performed to check the deflections of the tool. But this method does not predict the influence of these deflections on the final quality of the part. In order to take tool deformations into account during drawing simulations, ESI has developed the ability to couple solvers efficiently in a way the tool deformations can be real-time included in the drawing simulation without high increase in simulation time compared to simulations with rigid tools. In this paper a study will be presented which demonstrates the effect of tool deformations on the final part quality.

Forms of Friendship: A Person-Centered Assessment of the Quality, Stability, and Outcomes of Different Types of Adolescent Friends.

PubMed

Hiatt, Cody; Laursen, Brett; Mooney, Karen S; Rubin, Kenneth H

2015-04-01

Friendships differ in terms of their quality and participants may or may not agree as to their perceptions of relationship quality. Two studies ( N = 230 and 242) were conducted to identify distinct and replicable categories of friendship among young adolescents ( M = 11.6 years old) using self and partner reports of relationship quality. Same-sex friendships were identified from reciprocated friend nominations. Each friend described perceptions of negativity and social support in the relationship. Cluster analyses based on reports from both friends yielded 4 friendship types in each study: a high quality group, a low quality group, and two groups in which friends disagreed about the quality of the relationship. High quality friendships were most apt to be stable from the 6 th to the 7 th grade. Participants in high quality friendships reported the highest levels of global self-worth and perceived behavioral conduct and the lowest levels of problem behaviors. Dyads reporting discrepant perceptions of quality differed from dyads who agreed that the friendship was high quality in terms of stability and individual adjustment, underscoring the advantages of person-centered strategies that incorporate perceptions of both partners in categorizations of relationships.

Forms of Friendship: A Person-Centered Assessment of the Quality, Stability, and Outcomes of Different Types of Adolescent Friends

PubMed Central

Hiatt, Cody; Laursen, Brett; Mooney, Karen S.; Rubin, Kenneth H.

2015-01-01

Friendships differ in terms of their quality and participants may or may not agree as to their perceptions of relationship quality. Two studies (N = 230 and 242) were conducted to identify distinct and replicable categories of friendship among young adolescents (M = 11.6 years old) using self and partner reports of relationship quality. Same-sex friendships were identified from reciprocated friend nominations. Each friend described perceptions of negativity and social support in the relationship. Cluster analyses based on reports from both friends yielded 4 friendship types in each study: a high quality group, a low quality group, and two groups in which friends disagreed about the quality of the relationship. High quality friendships were most apt to be stable from the 6th to the 7th grade. Participants in high quality friendships reported the highest levels of global self-worth and perceived behavioral conduct and the lowest levels of problem behaviors. Dyads reporting discrepant perceptions of quality differed from dyads who agreed that the friendship was high quality in terms of stability and individual adjustment, underscoring the advantages of person-centered strategies that incorporate perceptions of both partners in categorizations of relationships. PMID:25620829

Influence of raw milk quality on processed dairy products: How do raw milk quality test results relate to product quality and yield?

PubMed

Murphy, Steven C; Martin, Nicole H; Barbano, David M; Wiedmann, Martin

2016-12-01

This article provides an overview of the influence of raw milk quality on the quality of processed dairy products and offers a perspective on the merits of investing in quality. Dairy farmers are frequently offered monetary premium incentives to provide high-quality milk to processors. These incentives are most often based on raw milk somatic cell and bacteria count levels well below the regulatory public health-based limits. Justification for these incentive payments can be based on improved processed product quality and manufacturing efficiencies that provide the processor with a return on their investment for high-quality raw milk. In some cases, this return on investment is difficult to measure. Raw milks with high levels of somatic cells and bacteria are associated with increased enzyme activity that can result in product defects. Use of raw milk with somatic cell counts >100,000cells/mL has been shown to reduce cheese yields, and higher levels, generally >400,000 cells/mL, have been associated with textural and flavor defects in cheese and other products. Although most research indicates that fairly high total bacteria counts (>1,000,000 cfu/mL) in raw milk are needed to cause defects in most processed dairy products, receiving high-quality milk from the farm allows some flexibility for handling raw milk, which can increase efficiencies and reduce the risk of raw milk reaching bacterial levels of concern. Monitoring total bacterial numbers in regard to raw milk quality is imperative, but determining levels of specific types of bacteria present has gained increasing importance. For example, spores of certain spore-forming bacteria present in raw milk at very low levels (e.g., <1/mL) can survive pasteurization and grow in milk and cheese products to levels that result in defects. With the exception of meeting product specifications often required for milk powders, testing for specific spore-forming groups is currently not used in quality incentive programs in the United States but is used in other countries (e.g., the Netherlands). Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Realization of high quality production schedules: Structuring quality factors via iteration of user specification processes

NASA Technical Reports Server (NTRS)

Hamazaki, Takashi

1992-01-01

This paper describes an architecture for realizing high quality production schedules. Although quality is one of the most important aspects of production scheduling, it is difficult, even for a user, to specify precisely. However, it is also true that the decision as to whether a scheduler is good or bad can only be made by the user. This paper proposes the following: (1) the quality of a schedule can be represented in the form of quality factors, i.e. constraints and objectives of the domain, and their structure; (2) quality factors and their structure can be used for decision making at local decision points during the scheduling process; and (3) that they can be defined via iteration of user specification processes.

Investigation of MgF2 optical thin films with ultralow refractive indices prepared from autoclaved sols.

PubMed

Murata, Tsuyoshi; Ishizawa, Hitoshi; Tanaka, Akira

2008-05-01

We have successfully developed a process to form high quality MgF(2) thin films with ultralow refractive indices from autoclaved sols prepared from magnesium acetate and hydrofluoric acid. And we have confirmed that our porous MgF(2) coatings have not only high transmittance in the UV region but also high uniformity of film thickness. They can be uniformly formed on phiv 300 mm substrates as a single coating and as a hybrid coating with sublayers formed by physical vapor deposition. They are expected to be applied to various optics that need high transmittance in the UV region.

Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP

NASA Astrophysics Data System (ADS)

Slange, T. K.; Warnet, L. L.; Grouve, W. J. B.; Akkerman, R.

2018-05-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The combination with rapid AFP as blank manufacturing technology can further extend the applicability of stamp forming by allowing rapid lay-up of tailored blanks and offering partial preconsolidation. In an experimental study it is demonstrated that high quality laminates with good flexural strength can be obtained by following this process route. The consolidation of ply-drop regions is demonstrated by flat laminates with a thickness step. The influence of fiber orientations, blank-tooling misalignments and AFP tolerances is investigated.

Facile synthesis of graphene on dielectric surfaces using a two-temperature reactor CVD system

NASA Astrophysics Data System (ADS)

Zhang, C.; Man, B. Y.; Yang, C.; Jiang, S. Z.; Liu, M.; Chen, C. S.; Xu, S. C.; Sun, Z. C.; Gao, X. G.; Chen, X. J.

2013-10-01

Direct deposition of graphene on a dielectric substrate is demonstrated using a chemical vapor deposition system with a two-temperature reactor. The two-temperature reactor is utilized to offer sufficient, well-proportioned floating Cu atoms and to provide a temperature gradient for facile synthesis of graphene on dielectric surfaces. The evaporated Cu atoms catalyze the reaction in the presented method. C atoms and Cu atoms respectively act as the nuclei for forming graphene film in the low-temperature zone and the zones close to the high-temperature zones. A uniform and high-quality graphene film is formed in an atmosphere of sufficient and well-proportioned floating Cu atoms. Raman spectroscopy, scanning electron microscopy and atomic force microscopy confirm the presence of uniform and high-quality graphene.

Forms of Soft Sculpture

ERIC Educational Resources Information Center

Tucker, Dorothy

1978-01-01

For the past several years, students at Madison Senior High School in San Diego have responded to the tactile texture and draping quality of soft materials. They experimented enthusiastically with three-dimensional forms made out of foam rubber. Here is the result of their efforts and experimentation. (Author/RK)

Formation of high-quality self-assembled monolayers of conjugated dithiols on gold: base matters.

PubMed

Valkenier, Hennie; Huisman, Everardus H; van Hal, Paul A; de Leeuw, Dago M; Chiechi, Ryan C; Hummelen, Jan C

2011-04-06

This Article reports a systematic study on the formation of self-assembled monolayers (SAMs) of conjugated molecules for molecular electronic (ME) devices. We monitored the deprotection reaction of acetyl protected dithiols of oligophenylene ethynylenes (OPEs) in solution using two different bases and studied the quality of the resulting SAMs on gold. We found that the optimal conditions to reproducibly form dense, high-quality monolayers are 9-15% triethylamine (Et(3)N) in THF. The deprotection base tetrabutylammonium hydroxide (Bu(4)NOH) leads to less dense SAMs and the incorporation of Bu(4)N into the monolayer. Furthermore, our results show the importance of the equilibrium concentrations of (di)thiolate in solution on the quality of the SAM. To demonstrate the relevance of these results for molecular electronics applications, large-area molecular junctions were fabricated using no base, Et(3)N, and Bu(4)NOH. The magnitude of the current-densities in these devices is highly dependent on the base. A value of β=0.15 Å(-1) for the exponential decay of the current-density of OPEs of varying length formed using Et(3)N was obtained. © 2011 American Chemical Society

Apparatus for forming adobe bricks and drilling wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinnamon, H. D.

1985-02-12

An improved apparatus for the continuous and relatively labor-free fabrication of adobe bricks and the forcing of well casings into the earth. With regard to forming adobe bricks, a rotating table carries the bricks being processed from one station to the next and a novel means for applying unusually high forming pressures permits immediate forming and ejection of the bricks from the forms while at the same time producing adobe bricks of improved quality and hardness characteristics.

Report on Survey of Industry Needs for Quality. Summary Report.

ERIC Educational Resources Information Center

Neylon, Kevin; And Others

The TAFE (Technical and Further Education) National Centre for Research and Development conducted a survey to determine industry needs for quality training in Australia. Interviews were conducted with managers in manufacturing and tourism/hospitality companies throughout Australia, especially with firms with a high reputation. Interview forms were…

Nonmonetary Compensation in the Public Teacher Labor Market

ERIC Educational Resources Information Center

Player, Daniel

2010-01-01

Because of the rigid salary structure in the public teacher labor market, principals may have the incentive to align classes favorably for high-quality teachers as a form of nonmonetary compensation. This article tests whether higher-quality teachers, holding other characteristics constant, tend to be matched with more favorable assignments. The…

Improvement in top-gate MoS2 transistor performance due to high quality backside Al2O3 layer

NASA Astrophysics Data System (ADS)

Bolshakov, Pavel; Zhao, Peng; Azcatl, Angelica; Hurley, Paul K.; Wallace, Robert M.; Young, Chadwin D.

2017-07-01

A high quality Al2O3 layer is developed to achieve high performance in top-gate MoS2 transistors. Compared with top-gate MoS2 field effect transistors on a SiO2 layer, the intrinsic mobility and subthreshold slope were greatly improved in high-k backside layer devices. A forming gas anneal is found to enhance device performance due to a reduction in the charge trap density of the backside dielectric. The major improvements in device performance are ascribed to the forming gas anneal and the high-k dielectric screening effect of the backside Al2O3 layer. Top-gate devices built upon these stacks exhibit a near-ideal subthreshold slope of ˜69 mV/dec and a high Y-Function extracted intrinsic carrier mobility (μo) of 145 cm2/V.s, indicating a positive influence on top-gate device performance even without any backside bias.

Enhancing arabic bread quality and shelf life stability using bread improvers.

PubMed

Aleid, S M; Al-Hulaibi, A A; Ghoush, M Abu; Al-Shathri, A A

2015-08-01

Arabic breads is produced mainly from hard red winter wheat (HRWW) and have relatively little crumb, dense texture, form pocket and are often round with golden brown crust color. The objectives of this research were to investigate the effect of different bread improvers combinations addition in enhancing the quality parameters of Arabic bread. Therefore, the ability of Arabic bread for rolling, folding and overall quality were evaluated during the Arabic bread storage period for 2 days. It was found that there was significant effect of bread improvers combinations (Arabic gum "AG" * Mongglycerides "MG" *alpha-amylase) addition on the ability of Arabic bread for rolling and folding on the second day (P ≤ 0.1). The highest white Arabic bread quality was obtained significantly from addition of low AG, high of MG and high alpha-amylase combination and high AG, low of MG and high alpha-amylase combination. While, low of AG, high of MG and low alpha-amylase combination and high of AG, high of MG and low alpha-amylase combination significantly exhibited the highest overall quality for the Arabic bread made from whole flour.

Quality variations in black musli (curculigo orchioides gaertn.).

PubMed

Mathew, P P Joy Samuel; Savithri, K E; Skaria, Baby P; Kurien, Kochurani

2004-07-01

Black musli (Curculigo orchioides Gaertn.) one of the ayurvedic dasapushpa and a rejuvenating and aphrodisiac drug. Is on the verge of extinction and needs to be conserved and cultivated. Large variations are also observed in the quality of the crude drug available in the market. Study on the quality of C. orchioides in natural habitat, under cultivation and in trade in south India showed that there was considerable variation with biotypes and habitats. Drugs collected form the natural habitat was superior in quality to that produced by cultivation. Among the market samples collected from the various Zones of kerala, those from the High Ranges were superior in most of the quality parameters, which indicated its superiority for high quality drug formulation. Among the southern states, Tamil Nadu samples ranked next to High Range samples in this respect. There exists large variability in the market samples and there is felt-need for proper standardization of the crude drug for ensuring quality in the drug formulations.

Improving Quality of Care in Patients with Liver Cirrhosis.

PubMed

Saberifiroozi, Mehdi

2017-10-01

Liver cirrhosis is a major chronic disease in the field of digestive diseases. It causes more than one million deaths per year. Despite established evidence based guidelines, the adherence to standard of care or quality indicators are variable. Complete adherence to the recommendations of guidelines is less than 50%. To improve the quality of care in patients with cirrhosis, we need a more holistic view. Because of high rate of death due to cardiovascular disease and neoplasms, the care of comorbid conditions and risk factors such as smoking, hypertension, high blood sugar or cholesterol, would be important in addition to the management of primary liver disease. Despite a holistic multidisciplinary approach for this goal, the management of such patients should be patient centered and individualized. The diagnosis of underlying etiology and its appropriate treatment is the most important step. Definition and customizing the quality indicators for quality measure in patients are needed. Because most suggested quality indicators are designed for measuring the quality of care in decompensated liver cirrhosis, we need special quality indicators for compensated and milder forms of chronic liver disease as well. Training the patients for participation in their own management, design of special clinics with dedicated health professionals in a form of chronic disease model, is suggested for improvement of quality of care in this group of patients. Special day care centers by a dedicated gastroenterologist and a trained nurse may be a practical model for better management of such patients.

Presence and Quality of Kindergarten Children’s Friendships: Concurrent and Longitudinal Associations with Child Adjustment in the Early School Years

PubMed Central

Engle, Jennifer M.; McElwain, Nancy L.

2010-01-01

The presence and quality of friendships are posited to have developmental significance, yet little is known about the extent to which children without friends versus low-quality friendships compare on socioemotional adjustment. The current study utilized data from a subsample of 567 children (289 boys) participating in the NICHD Study of Early Child Care and Youth Development. Based on maternal reports at kindergarten, four friendship groups were formed: no friends, low quality, average quality, and high quality, and these groups were used to predict teacher-reported behavior problems and social skills concurrently (in kindergarten) and longitudinally (in first and third grade). Concurrently, low-quality friendships were associated with greater externalizing behavior, whereas high-quality friendships were associated with greater social skills. Longitudinally, having no friends in kindergarten was associated with higher levels of externalizing behavior for boys, but lower levels for girls. Children without friends also showed more internalizing problems at first grade. Lastly, having a high-quality friendship in kindergarten was associated with greater social skills in first and third grades, but only for boys. Results underscore high-quality friendship as a context for the development of social skills and indicate different trajectories of problem behavior for kindergarten children with no friends versus low-quality friendships. PMID:21822401

An Observational Study of the Interactions of Socially Withdrawn/Anxious Early Adolescents and Their Friends

ERIC Educational Resources Information Center

Schneider, Barry H.

2009-01-01

Background: The friendships of socially withdrawn/anxious children and early adolescents have been found to lack critical rewarding qualities. Observational research may help elucidate the obstacles they face in forming and maintaining high-quality friendships with sociable peers. Method: We observed the interactions of 38 socially withdrawn early…

Academic Self-Efficacy Beliefs and Quality of Experience in Learning

ERIC Educational Resources Information Center

Bassi, Marta; Steca, Patrizia; Delle Fave, Antonella; Caprara, Gian Vittorio

2007-01-01

This study investigated learning activities and associated quality of experience of students with different levels of perceived academic self-efficacy. Two groups were formed out of 130 Italian adolescents (age 15-19), one with high and one with low academic self-efficacy beliefs (31 and 32 participants, respectively). Students provided valuation…

Silviculture in cooperation with hunters: The Kinzua Quality Deer Cooperative

Treesearch

Scott Reitz; Andrea Hille; Susan Stout

2004-01-01

The long history of deer overabundance in Pennsylvania is associated with very high reforestation costs and substantial threats to diversity and sustainability. In response to this legacy, several landowners and agency personnel formed the Kinzua Quality Deer Cooperative (KQDC) in partnership with the Sand County Foundation. This Cooperative focuses on about 74,000...

High-Alpha Handling Qualities Flight Research on the NASA F/A-18 High Alpha Research Vehicle

NASA Technical Reports Server (NTRS)

Wichman, Keith D.; Pahle, Joseph W.; Bahm, Catherine; Davidson, John B.; Bacon, Barton J.; Murphy, Patrick C.; Ostroff, Aaron J.; Hoffler, Keith D.

1996-01-01

A flight research study of high-angle-of-attack handling qualities has been conducted at the NASA Dryden Flight Research Center using the F/A-18 High Alpha Research Vehicle (HARV). The objectives were to create a high-angle-of-attack handling qualities flight database, develop appropriate research evaluation maneuvers, and evaluate high-angle-of-attack handling qualities guidelines and criteria. Using linear and nonlinear simulations and flight research data, the predictions from each criterion were compared with the pilot ratings and comments. Proposed high-angle-of-attack nonlinear design guidelines and proposed handling qualities criteria and guidelines developed using piloted simulation were considered. Recently formulated time-domain Neal-Smith guidelines were also considered for application to high-angle-of-attack maneuvering. Conventional envelope criteria were evaluated for possible extension to the high-angle-of-attack regime. Additionally, the maneuvers were studied as potential evaluation techniques, including a limited validation of the proposed standard evaluation maneuver set. This paper gives an overview of these research objectives through examples and summarizes result highlights. The maneuver development is described briefly, the criteria evaluation is emphasized with example results given, and a brief discussion of the database form and content is presented.

Effect of process parameters on formability of laser melting deposited 12CrNi2 alloy steel

NASA Astrophysics Data System (ADS)

Peng, Qian; Dong, Shiyun; Kang, Xueliang; Yan, Shixing; Men, Ping

2018-03-01

As a new rapid prototyping technology, the laser melting deposition technology not only has the advantages of fast forming, high efficiency, but also free control in the design and production chain. Therefore, it has drawn extensive attention from community.With the continuous improvement of steel performance requirements, high performance low-carbon alloy steel is gradually integrated into high-tech fields such as aerospace, high-speed train and armored equipment.However, it is necessary to further explore and optimize the difficult process of laser melting deposited alloy steel parts to achieve the performance and shape control.This article took the orthogonal experiment on alloy steel powder by laser melting deposition ,and revealed the influence rule of the laser power, scanning speed, powder gas flow on the quality of the sample than the dilution rate, surface morphology and microstructure analysis were carried out.Finally, under the optimum technological parameters, the Excellent surface quality of the alloy steel forming part with high density, no pore and cracks was obtained.

Low Temperature Rhombohedral Single Crystal SiGe Epitaxy on c-plane Sapphire

NASA Technical Reports Server (NTRS)

Duzik, Adam J.; Choi, Sang H.

2016-01-01

Current best practice in epitaxial growth of rhombohedral SiGe onto (0001) sapphire (Al2O3) substrate surfaces requires extreme conditions to grow a single crystal SiGe film. Previous models described the sapphire surface reconstruction as the overriding factor in rhombohedral epitaxy, requiring a high temperature Al-terminated surface for high quality films. Temperatures in the 850-1100 C range were thought to be necessary to get SiGe to form coherent atomic matching between the (111) SiGe plane and the (0001) sapphire surface. Such fabrication conditions are difficult and uneconomical, hindering widespread application. This work proposes an alternative model that considers the bulk sapphire structure and determines how the SiGe film nucleates and grows. Accounting for thermal expansion effects, calculations using this new model show that both pure Ge and SiGe can form single crystal films in the 450-550 C temperature range. Experimental results confirm these predictions, where x-ray diffraction and atomic force microscopy show the films fabricated at low temperature rival the high temperature films in crystallographic and surface quality. Finally, an explanation is provided for why films of comparable high quality can be produced in either temperature range.

Dropwise additive manufacturing of pharmaceutical products for melt-based dosage forms.

PubMed

Içten, Elçin; Giridhar, Arun; Taylor, Lynne S; Nagy, Zoltan K; Reklaitis, Gintaras V

2015-05-01

The US Food and Drug Administration introduced the quality by design approach and process analytical technology guidance to encourage innovation and efficiency in pharmaceutical development, manufacturing, and quality assurance. As part of this renewed emphasis on the improvement of manufacturing, the pharmaceutical industry has begun to develop more efficient production processes with more intensive use of online measurement and sensing, real-time quality control, and process control tools. Here, we present dropwise additive manufacturing of pharmaceutical products (DAMPP) as an alternative to conventional pharmaceutical manufacturing methods. This mini-manufacturing process for the production of pharmaceuticals utilizes drop on demand printing technology for automated and controlled deposition of melt-based formulations onto edible substrates. The advantages of drop-on-demand technology, including reproducible production of small droplets, adjustable drop sizing, high placement accuracy, and flexible use of different formulations, enable production of individualized dosing even for low-dose and high-potency drugs. In this work, DAMPP is used to produce solid oral dosage forms from hot melts of an active pharmaceutical ingredient and a polymer. The dosage forms are analyzed to show the reproducibility of dosing and the dissolution behavior of different formulations. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Preparation and Characterization of Cyclotrimethylenetrinitramine (RDX) with Reduced Sensitivity

PubMed Central

Wang, Yuqiao; Li, Xin; Chen, Shusen; Ma, Xiao; Yu, Ziyang; Jin, Shaohua; Li, Lijie; Chen, Yu

2017-01-01

The internal defects and shape of cyclotrimethylenetrinitramine (RDX) crystal are critical parameters for the preparation of reduced sensitivity RDX (RS-RDX). In the current study, RDX was re-crystallized and spheroidized to form the high-quality RDX that was further characterized by purity, apparent density, size distribution, specific surface area, impact sensitivity, and shock sensitivity. The effects of re-crystallization solvent on the growth morphology of RDX crystal were investigated by both theoretical simulation and experiment test, and consistent results were obtained. The high-quality RDX exhibited a high purity (≥99.90%), high apparent density (≥1.811 g/cm3), spherical shape, and relatively low impact sensitivity (6%). Its specific surface area was reduced more than 30%. Compared with conventional RDXs, the high-quality RDX reduced the shock sensitivities of PBXN-109 and PBXW-115 by more than 30%, indicating that it was a RS-RDX. The reduced sensitivity and good processability of the high-quality RDX would be significant in improving the performances of RDX-based PBXs. PMID:28825661

Methanol induction optimization for scFv antibody fragment production in Pichia pastoris.

PubMed

Cunha, A E; Clemente, J J; Gomes, R; Pinto, F; Thomaz, M; Miranda, S; Pinto, R; Moosmayer, D; Donner, P; Carrondo, M J T

2004-05-20

Fibronectin splice variant ED B (extracellular domain B) is a promising marker for angiogenesis in growing solid tumors. Currently, recombinant antibodies against ED B are being investigated concerning their potential use, for either therapeutic or diagnostic purposes. Single-chain antibody fragments directed against the ED B can be efficiently expressed in Pichia pastoris; thus, a recombinant strain of the methylotropic yeast P. pastoris was used for this work. Three different forms of scFv antibody fragment are found in the supernatant from this fermentation: covalent homodimer, associative homodimer, and monomer. Both homodimeric forms can be converted to the monomeric form (under reducing conditions) and be efficiently radiolabeled, whereas the monomeric form of scFv already present in the supernatant cannot. It was also found that the fraction of protein in the monomeric form is highly dependent on the mode of induction rather than scFv concentration. This suggests that the monomeric form of the scFv present in the supernatant might be a result of events occurring at the expression, secretion, or folding level. A high cell density fermentation protocol was developed by optimizing methanol induction, yielding the highest scFv antibody fragment production rate and product quality; cell concentration at the induction point and specific methanol uptake rate were found to be the most important control variables. A decrease in specific methanol uptake rate led to a higher specific production rate for the scFv antibody fragment (5.4 microg g(cell) h(-1)). Product quality, i.e., percentage of product in a homodimeric form, also increased with the decrease in methanol uptake rate. Furthermore, the volumetric productivity depended on cell concentration at the induction point, increasing with the increase of cell concentration up to 320 g L(-1) wet cell weight (WCW). The reduction of the methanol feeding rate for induction, and consequently of the oxygen uptake rate, have important consequences for optimizing product titers and quality and thus on the scale-up of this production process; hence one of the major limitations upon high cell density cultivation in bioreactors is keeping the high oxygen transfer rate required. From the results obtained, a scale-up strategy was developed based on the available oxygen transfer rates at larger scales, allowing the definition of the optimum biomass concentration for induction and methanol feeding strategy for maximization of product titer and quality. Copyright 2004 Wiley Periodicals, Inc.

Turkish validity and reliability of a pediatric quality of life cancer module for children aged 8-12 and parents.

PubMed

Tanir, Meltem Kurtuncu; Kuguoglu, Sema

2011-01-01

This descriptive study was conducted to determine the validity and reliability in Turkey of the Pediatric Quality of Life Inventory Cancer Module (PedsQL 3.0) for children aged 8-12 in the hematology-oncology polyclinics of two university hospitals in Istanbul during the period 2006-2007. The data collection instruments were the Pediatric Quality of Life Inventory (PedsQL 4.0), the Pediatric Quality of Life Inventory Cancer Module (PedsQL 3.0) and a socio-demographic questionnaire, applied for 146 children diagnosed with cancer and 146 parents. Cronbach's alpha coefficients for the PedsQL 3.0 were found to be 0.602-0.982 for sub-groups with the children's form, 0.644-0.966 with the parents' form. The scale was found to give a significantly high level of reliability (0.60 ≤ ± < 0.80). Significant and directly proportional correlations were demonstrated between the forms for children and parents. It was concluded that the PedsQL 3.0 cancer module is a valid and reliable tool for assessing the quality of life of Turkish children, aged 8-12, diagnosed with cancer.

Constructing IGA-suitable planar parameterization from complex CAD boundary by domain partition and global/local optimization

NASA Astrophysics Data System (ADS)

Xu, Gang; Li, Ming; Mourrain, Bernard; Rabczuk, Timon; Xu, Jinlan; Bordas, Stéphane P. A.

2018-01-01

In this paper, we propose a general framework for constructing IGA-suitable planar B-spline parameterizations from given complex CAD boundaries consisting of a set of B-spline curves. Instead of forming the computational domain by a simple boundary, planar domains with high genus and more complex boundary curves are considered. Firstly, some pre-processing operations including B\\'ezier extraction and subdivision are performed on each boundary curve in order to generate a high-quality planar parameterization; then a robust planar domain partition framework is proposed to construct high-quality patch-meshing results with few singularities from the discrete boundary formed by connecting the end points of the resulting boundary segments. After the topology information generation of quadrilateral decomposition, the optimal placement of interior B\\'ezier curves corresponding to the interior edges of the quadrangulation is constructed by a global optimization method to achieve a patch-partition with high quality. Finally, after the imposition of C1=G1-continuity constraints on the interface of neighboring B\\'ezier patches with respect to each quad in the quadrangulation, the high-quality B\\'ezier patch parameterization is obtained by a C1-constrained local optimization method to achieve uniform and orthogonal iso-parametric structures while keeping the continuity conditions between patches. The efficiency and robustness of the proposed method are demonstrated by several examples which are compared to results obtained by the skeleton-based parameterization approach.

Author-paper affiliation network architecture influences the methodological quality of systematic reviews and meta-analyses of psoriasis.

PubMed

Sanz-Cabanillas, Juan Luis; Ruano, Juan; Gomez-Garcia, Francisco; Alcalde-Mellado, Patricia; Gay-Mimbrera, Jesus; Aguilar-Luque, Macarena; Maestre-Lopez, Beatriz; Gonzalez-Padilla, Marcelino; Carmona-Fernandez, Pedro J; Velez Garcia-Nieto, Antonio; Isla-Tejera, Beatriz

2017-01-01

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors' collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews.

Influence of follicular fluid GDF9 and BMP15 on embryo quality.

PubMed

Gode, Funda; Gulekli, Bulent; Dogan, Erbil; Korhan, Peyda; Dogan, Seda; Bige, Ozgur; Cimrin, Dilek; Atabey, Nese

2011-06-01

To evaluate the association between follicular fluid levels of propeptide and mature forms of growth differentiation factor (GDF) 9 and bone morphogenetic protein (BMP) 15 with subsequent oocyte and embryo quality. Prospective clinical study. University hospital. Eighty-one infertile patients who underwent in vitro fertilization (IVF)/intracytoplasmic sperm injection (ICSI). The expression levels of the propeptide and mature forms of follicular fluid GDF9 and BMP15 were determined by western blot analysis. The levels of follicular fluid hormones (FSH, E2, and P) were measured with automated chemiluminescent enzyme immunoassays. The relationships between the levels of GDF9 and BMP15, hormones, oocyte maturation, and embryo quality. Mature GDF9 levels were significantly correlated with the nuclear maturation of oocytes. The mean mature GDF9 level was 4.87±0.60 in the high-embryo-quality group and 1.45±0.81 in the low-embryo-quality group. There were no statistically significant differences in embryo quality among the patients regarding propeptide GDF9 and BMP15 expression status. There was a negative correlation between follicular fluid levels of P and the mature form of GDF9. Higher mature GDF9 levels in the follicular fluid were significantly correlated with oocyte nuclear maturation and embryo quality. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Determinants of quality of life in Brazilian patients with myasthenia gravis.

PubMed

Mourão, Aline Mansueto; Gomez, Rodrigo Santiago; Barbosa, Luiz Sergio Mageste; Freitas, Denise da Silva; Comini-Frota, Elizabeth Regina; Kummer, Arthur; Lemos, Stella Maris Aguiar; Teixeira, Antonio Lucio

2016-07-01

The aims of the current study were 1) to evaluate the reliability and validity of the Brazilian version of the 15-item Myasthenia Gravis Quality of Life Scale and 2) to investigate the quality of life of Brazilian patients with myasthenia gravis and its determinants. This cross-sectional study included 69 patients with myasthenia gravis who underwent neurological evaluation and completed questionnaires regarding quality of life (the 36-item Short Form of the Medical Outcomes Study and the 15-item Myasthenia Gravis Quality of Life Scale), anxiety and depressive symptoms. The Brazilian version of the 15-item Myasthenia Gravis Quality of Life Scale showed high internal consistency and good concurrent validity with the 36-item Short Form of the Medical Outcomes Study and its subscales. Determinants of quality of life in Brazilian patients with myasthenia gravis included the current status of myasthenia gravis as assessed by the Myasthenia Gravis Composite, the current prednisone dose and the levels of anxiety and depression. The Brazilian version of the 15-item Myasthenia Gravis Quality of Life Scale is a valid instrument. Symptom severity, prednisone dosage and anxiety and depression levels impact the quality of life of patients with myasthenia gravis.

Determinants of quality of life in Brazilian patients with myasthenia gravis

PubMed Central

Mourão, Aline Mansueto; Gomez, Rodrigo Santiago; Barbosa, Luiz Sergio Mageste; da Silva Freitas, Denise; Comini-Frota, Elizabeth Regina; Kummer, Arthur; Lemos, Stella Maris Aguiar; Teixeira, Antonio Lucio

2016-01-01

OBJECTIVES: The aims of the current study were 1) to evaluate the reliability and validity of the Brazilian version of the 15-item Myasthenia Gravis Quality of Life Scale and 2) to investigate the quality of life of Brazilian patients with myasthenia gravis and its determinants. METHODS: This cross-sectional study included 69 patients with myasthenia gravis who underwent neurological evaluation and completed questionnaires regarding quality of life (the 36-item Short Form of the Medical Outcomes Study and the 15-item Myasthenia Gravis Quality of Life Scale), anxiety and depressive symptoms. RESULTS: The Brazilian version of the 15-item Myasthenia Gravis Quality of Life Scale showed high internal consistency and good concurrent validity with the 36-item Short Form of the Medical Outcomes Study and its subscales. Determinants of quality of life in Brazilian patients with myasthenia gravis included the current status of myasthenia gravis as assessed by the Myasthenia Gravis Composite, the current prednisone dose and the levels of anxiety and depression. CONCLUSION: The Brazilian version of the 15-item Myasthenia Gravis Quality of Life Scale is a valid instrument. Symptom severity, prednisone dosage and anxiety and depression levels impact the quality of life of patients with myasthenia gravis. PMID:27464292

Establishing a clinical trials network in nephrology: experience of the Australasian Kidney Trials Network

PubMed Central

Morrish, Alicia T; Hawley, Carmel M; Johnson, David W; Badve, Sunil V; Perkovic, Vlado; Reidlinger, Donna M; Cass, Alan

2014-01-01

Chronic kidney disease is a major public health problem globally. Despite this, there are fewer high-quality, high-impact clinical trials in nephrology than other internal medicine specialties, which has led to large gaps in evidence. To address this deficiency, the Australasian Kidney Trials Network, a Collaborative Research Group, was formed in 2005. Since then, the Network has provided infrastructure and expertise to conduct patient-focused high-quality, investigator-initiated clinical trials in nephrology. The Network has not only been successful in engaging the nephrology community in Australia and New Zealand but also in forming collaborations with leading researchers from other countries. This article describes the establishment, development, and functions of the Network. The article also discusses the current and future funding strategies to ensure uninterrupted conduct of much needed clinical trials in nephrology to improve the outcomes of patients affected by kidney diseases with cost-effective interventions. PMID:24088955

SANTPEN's SoTL Journey: Building and Using a SoTL Approach across Institutions

ERIC Educational Resources Information Center

West, Deborah; Stephenson, Helen

2016-01-01

In the current higher education environment, providing high quality teaching and learning experiences to students has moved beyond desirable to essential. Quality improvement takes many forms, but one core aspect to ensure sustainable improvement is the development of a culture of scholarship of teaching and learning (SoTL). Developing such an…

Cultural Differences in Support Provision: The Importance of Relationship Quality.

PubMed

Chen, Jacqueline M; Kim, Heejung S; Sherman, David K; Hashimoto, Takeshi

2015-11-01

Emotional expression is highly valued in individualistic cultures, whereas emotional restraint is prioritized in collectivistic cultures. We hypothesized that high-quality relationships in these cultures would exhibit the forms of support provision congruent with their respective expectations. Study 1 examined support transactions among friends in response to a laboratory stressor and found that objectively judged relationship quality (RQ) more strongly positively predicted emotion-focused support provision behaviors by European Americans than by Asian Americans. Study 2, a questionnaire study, found that self-reported RQ predicted emotion-focused support provision more strongly among European Americans than among Japanese. Study 3 investigated more indirect forms of support and found that RQ more strongly predicted worrying about and monitoring close others enduring stressors and spending time with them without talking about the stressor among Asian Americans compared with European Americans. These findings suggest that RQ is expressed in terms of support provision in culturally normative ways. © 2015 by the Society for Personality and Social Psychology, Inc.

Highly Non-Linear Optical (NLO) organic crystals

NASA Technical Reports Server (NTRS)

Harris, J. Milton

1987-01-01

This research project involves the synthesis and characterization of organic materials having powerful nonlinear optical (NLO) properties and the growth of highly ordered crystals and monomolecular films of these materials. Research in four areas is discussed: theoretical design of new materials, characterization of NLO materials, synthesis of new materials and development of coupling procedures for forming layered films, and improvement of the techniques for vapor phase and solution phase growth of high quality organic crystals. Knowledge gained from these experiments will form the basis for experiments in the growth of these crystals.

Fluorine-Based DRIE of Fused Silica

NASA Technical Reports Server (NTRS)

Yee, Karl; Shcheglov, Kirill; Li, Jian; Choi, Daniel

2007-01-01

A process of deep reactive-ion etching (DRIE) using a fluorine-based gas mixture enhanced by induction-coupled plasma (ICP) has been demonstrated to be effective in forming high-aspect-ratio three-dimensional patterns in fused silica. The patterns are defined in part by an etch mask in the form of a thick, high-quality aluminum film. The process was developed to satisfy a need to fabricate high-aspect-ratio fused-silica resonators for vibratory microgyroscopes, and could be used to satisfy similar requirements for fabricating other fused-silica components.

Crystal growth of Bi{sub 2}Te{sub 3} and noble cleaved (0001) surface properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Atuchin, V.V., E-mail: atuchin@thermo.isp.nsc.ru; Functional Electronics Laboratory, Tomsk State University, Tomsk 634050; Golyashov, V.A.

2016-04-15

A high quality Bi{sub 2}Te{sub 3} crystal has been grown by Bridgman method with the use of rotating heat field. The phase purity and bulk structural quality of the crystal have been verified by XRD analysis and rocking curve observation. The atomically smooth Bi{sub 2}Te{sub 3}(0001) surface with an excellent crystallographic quality is formed by cleavage in the air. The chemical and microstructural properties of the surface have been evaluated with RHEED, AFM, STM, SE and XPS. The Bi{sub 2}Te{sub 3}(0001) cleaved surface is formed by atomically smooth terraces with the height of the elemental step of ~1.04±0.1 nm, asmore » estimated by AFM. There is no surface oxidation process detected over a month keeping in the air at normal conditions, as shown by comparative core level photoelectron spectroscopy. - Graphical abstract: A high quality Bi{sub 2}Te{sub 3} crystal has been grown by Bridgman method with the use of rotating heat field and the Bi{sub 2}Te{sub 3}(0001) cleaved surface has been evaluated with RHEED, AFM, STM, SE and XPS. - Highlights: • High-quality Bi{sub 2}Te{sub 3} crystal of 10 mm in diameter and 50 mm long have been grown. • The high-purity cleaved Bi{sub 2}Te{sub 3}(0001) surface has been evaluated by RHEED, AFM, STM and XPS methods. • The Bi{sub 2}Te{sub 3} surface covered by atomically smooth (0001) terraces is chemically stable for a long time.« less

High-Rank Stakeholders' Perspectives on High-Stakes University Entrance Examinations Reform: Priorities and Problems

ERIC Educational Resources Information Center

Kiany, Gholam Reza; Shayestefar, Parvaneh; Samar, Reza Ghafar; Akbari, Ramin

2013-01-01

A steady stream of studies on high-stakes tests such as University Entrance Examinations (UEEs) suggests that high-stakes tests reforms serve as the leverage for promoting quality of learning, standards of teaching, and credible forms of accountability. However, such remediation is often not as effective as hoped and success is not necessarily…

The Distribution between the Dissolved and the Particulate Forms of 49 Metals across the Tigris River, Baghdad, Iraq

PubMed Central

Hamad, Samera Hussein; Schauer, James Jay; Shafer, Martin Merrill; Abed Al-Raheem, Esam; Satar, Hyder

2012-01-01

The distribution of dissolved and particulate forms of 49 elements was investigated along transect of the Tigris River (one of the major rivers of the world) within Baghdad city and in its major tributary (Diyala River) from 11 to 28 July 2011. SF-ICP-MS was used to measure total and filterable elements at 17 locations along the Tigris River transect, two samples from the Diyala River, and in one sample from the confluence of the two rivers. The calculated particulate forms were used to determine the particle-partition coefficients of the metals. No major changes in the elements concentrations down the river transect. Dissolved phases dominated the physical speciation of many metals (e.g., As, Mo, and Pt) in the Tigris River, while Al, Fe, Pb, Th, and Ti were exhibiting high particulate fractions, with a trend of particle partition coefficients of [Ti(40) > Th(35) > Fe(15) > Al(13) > Pb(4.5)] ∗ 106 L/kg. Particulate forms of all metals exhibited high concentrations in the Diyala River, though the partition coefficients were low due to high TSS (~270 mg/L). A comparison of Tigris with the major rivers of the world showed that Tigris quality in Baghdad is comparable to Seine River quality in Paris. PMID:23304083

High-quality permanent draft genome sequence of Bradyrhizobium sp. Th.b2, a microsymbiont of Amphicarpaea bracteata collected in Johnson City, New York

DOE PAGES

Tian, Rui; Parker, Matthew; Seshadri, Rekha; ...

2015-05-16

Bradyrhizobium sp. Th.b2 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen-fixing root nodule of Amphicarpaea bracteata collected in Johnson City, New York. Here we describe the features of Bradyrhizobium sp. Th.b2, together with high-quality permanent draft genome sequence information and annotation. The 10,118,060 high-quality draft genome is arranged in 266 scaffolds of 274 contigs, contains 9,809 protein-coding genes and 108 RNA-only encoding genes. In conclusion, this rhizobial genome was sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

High-quality permanent draft genome sequence of Bradyrhizobium sp. Th.b2, a microsymbiont of Amphicarpaea bracteata collected in Johnson City, New York

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Rui; Parker, Matthew; Seshadri, Rekha

Bradyrhizobium sp. Th.b2 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen-fixing root nodule of Amphicarpaea bracteata collected in Johnson City, New York. Here we describe the features of Bradyrhizobium sp. Th.b2, together with high-quality permanent draft genome sequence information and annotation. The 10,118,060 high-quality draft genome is arranged in 266 scaffolds of 274 contigs, contains 9,809 protein-coding genes and 108 RNA-only encoding genes. In conclusion, this rhizobial genome was sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

High quality factor whispering gallery modes from self-assembled hexagonal GaN rods grown by metal-organic vapor phase epitaxy.

PubMed

Tessarek, C; Sarau, G; Kiometzis, M; Christiansen, S

2013-02-11

Self-assembled GaN rods were grown on sapphire by metal-organic vapor phase epitaxy using a simple two-step method that relies first on a nitridation step followed by GaN epitaxy. The mask-free rods formed without any additional catalyst. Most of the vertically aligned rods exhibit a regular hexagonal shape with sharp edges and smooth sidewall facets. Cathodo- and microphotoluminescence investigations were carried out on single GaN rods. Whispering gallery modes with quality factors greater than 4000 were measured demonstrating the high morphological and optical quality of the self-assembled GaN rods.

Data Processing Aspects of MEDLARS

PubMed Central

Austin, Charles J.

1964-01-01

The speed and volume requirements of MEDLARS necessitate the use of high-speed data processing equipment, including paper-tape typewriters, a digital computer, and a special device for producing photo-composed output. Input to the system is of three types: variable source data, including citations from the literature and search requests; changes to such master files as the medical subject headings list and the journal record file; and operating instructions such as computer programs and procedures for machine operators. MEDLARS builds two major stores of data on magnetic tape. The Processed Citation File includes bibliographic citations in expanded form for high-quality printing at periodic intervals. The Compressed Citation File is a coded, time-sequential citation store which is used for high-speed searching against demand request input. Major design considerations include converting variable-length, alphanumeric data to mechanical form quickly and accurately; serial searching by the computer within a reasonable period of time; high-speed printing that must be of graphic quality; and efficient maintenance of various complex computer files. PMID:14119287

DATA PROCESSING ASPECTS OF MEDLARS.

PubMed

AUSTIN, C J

1964-01-01

The speed and volume requirements of MEDLARS necessitate the use of high-speed data processing equipment, including paper-tape typewriters, a digital computer, and a special device for producing photo-composed output. Input to the system is of three types: variable source data, including citations from the literature and search requests; changes to such master files as the medical subject headings list and the journal record file; and operating instructions such as computer programs and procedures for machine operators. MEDLARS builds two major stores of data on magnetic tape. The Processed Citation File includes bibliographic citations in expanded form for high-quality printing at periodic intervals. The Compressed Citation File is a coded, time-sequential citation store which is used for high-speed searching against demand request input. Major design considerations include converting variable-length, alphanumeric data to mechanical form quickly and accurately; serial searching by the computer within a reasonable period of time; high-speed printing that must be of graphic quality; and efficient maintenance of various complex computer files.

Keeping it clean: Creating and maintaining high quality fish data for the U.S. EPA National Rivers and Streams Assessment

EPA Science Inventory

One primary biological indicator of condition used in the National Rivers and Streams Assessment (NRSA) is the fish assemblage. Data for the 2008-2009 assessment were collected on field forms from over 2100 sites. After field forms were scanned into the NRSA database, we develope...

Pao's Selection Method for Quality Papers and the Subsequent Use of Medical Literature

ERIC Educational Resources Information Center

Boyce, Bert; Primov, Karen

1977-01-01

Pao's "quality filter" selection method is re-examined as to its effectiveness in selecting papers that not only are of use to medical educators but to researchers as well. It is concluded that the method does provide the librarian with a tool for forming a highly selective bibliography in a particular medical literature without need for…

Inverse-Micelle-Encapsulated Water-Enabled Bond Breaking of Dialkyl Diselenide/Disulfide: A Critical Step for Synthesizing High- Quality Gold Nanoparticles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zaluzhna, Oksana; Li, Ying; Allison, Thomas C.

2012-10-09

Inverse-micelle-encapsulated water formed in the two-phase Brust-Schiffrin method (BSM) synthesis of Au nanoparticles (NPs) is identified as essential for dialkyl diselenide/disulfide to react with the Au(III) complex in which the Se-Se/S-S bond is broken, leading to formation of higher-quality Au NPs.

High-quality multilayer graphene on an insulator formed by diffusion controlled Ni-induced layer exchange

NASA Astrophysics Data System (ADS)

Murata, H.; Saitoh, N.; Yoshizawa, N.; Suemasu, T.; Toko, K.

2017-12-01

The Ni-induced layer-exchange growth of amorphous carbon is a unique method used to fabricate uniform multilayer graphene (MLG) directly on an insulator. To improve the crystal quality of MLG, we prepare AlOx or SiO2 interlayers between amorphous C and Ni layers, which control the extent of diffusion of C atoms into the Ni layer. The growth morphology and Raman spectra observed from MLG formed by layer exchange strongly depend on the material type and thickness of the interlayers; a 1-nm-thick AlOx interlayer is found to be ideal for use in experiments. Transmission electron microscopy and electron energy-loss spectra reveal that the crystal quality of the resulting MLG is much higher than that of a sample without an interlayer. The grain size reaches a few μm, leading to an electrical conductivity of 1290 S/cm. The grain size and the electrical conductivity are the highest among MLG synthesized using a solid-phase reaction including metal-induced crystallization. The direct synthesis of uniform, high-quality MLG on arbitrary substrates will pave the way for advanced electronic devices integrated with carbon materials.

Spatial Data Quality Control Procedure applied to the Okavango Basin Information System

NASA Astrophysics Data System (ADS)

Butchart-Kuhlmann, Daniel

2014-05-01

Spatial data is a powerful form of information, capable of providing information of great interest and tremendous use to a variety of users. However, much like other data representing the 'real world', precision and accuracy must be high for the results of data analysis to be deemed reliable and thus applicable to real world projects and undertakings. The spatial data quality control (QC) procedure presented here was developed as the topic of a Master's thesis, in the sphere of and using data from the Okavango Basin Information System (OBIS), itself a part of The Future Okavango (TFO) project. The aim of the QC procedure was to form the basis of a method through which to determine the quality of spatial data relevant for application to hydrological, solute, and erosion transport modelling using the Jena Adaptable Modelling System (JAMS). As such, the quality of all data present in OBIS classified under the topics of elevation, geoscientific information, or inland waters, was evaluated. Since the initial data quality has been evaluated, efforts are underway to correct the errors found, thus improving the quality of the dataset.

Hexagonal Nanopyramidal Prisms of Nearly Intrinsic InN on Patterned GaN Nanowire Arrays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Golam Sarwar, A. T. M.; Leung, Benjamin; Wang, George T.

By using multiple growth steps that separate the nucleation and growth processes, we show that nearly intrinsic InN single nanocrystals of high optical quality can be formed on patterned GaN nanowire arrays by molecular beam epitaxy. The InN nanostructures form into well-defined hexagonal prisms with pyramidal tops. Micro-photoluminescence (μ-PL) is carried out at low temperature (LT: 28.2 K) and room temperature (RT: 285 K) to gauge the relative material quality of the InN nanostructures. Nanopyramidal prisms grown using a three-step growth method are found to show superior quantum efficiency. In conclusion, excitation and temperature dependent μ-PL demonstrates the very highmore » quality and nearly intrinsic nature of the ordered InN nanostructure arrays.« less

Hexagonal Nanopyramidal Prisms of Nearly Intrinsic InN on Patterned GaN Nanowire Arrays

DOE PAGES

Golam Sarwar, A. T. M.; Leung, Benjamin; Wang, George T.; ...

2018-01-04

By using multiple growth steps that separate the nucleation and growth processes, we show that nearly intrinsic InN single nanocrystals of high optical quality can be formed on patterned GaN nanowire arrays by molecular beam epitaxy. The InN nanostructures form into well-defined hexagonal prisms with pyramidal tops. Micro-photoluminescence (μ-PL) is carried out at low temperature (LT: 28.2 K) and room temperature (RT: 285 K) to gauge the relative material quality of the InN nanostructures. Nanopyramidal prisms grown using a three-step growth method are found to show superior quantum efficiency. In conclusion, excitation and temperature dependent μ-PL demonstrates the very highmore » quality and nearly intrinsic nature of the ordered InN nanostructure arrays.« less

Victimisation, poly-victimisation and health-related quality of life among high school students in Vietnam: a cross-sectional survey.

PubMed

Le, Minh T H; Holton, Sara; Nguyen, Huong T; Wolfe, Rory; Fisher, Jane

2016-11-04

In high and upper-middle income countries poly-victimisation (exposure to multiple forms of victimisation) is associated with worse health-related quality of life (HRQoL) among adolescents. There is a lack of empirical evidence about these associations from low- and lower-middle income countries. The aims of this study were to examine the associations between exposure to 1) individual forms of victimisation and 2) poly-victimisation and the HRQoL of adolescents in Vietnam. A cross-sectional, anonymously-completed survey of high school students in Hanoi, Vietnam. Lifetime exposure to eight individual forms of victimisation and poly-victimisation were assessed using the Juvenile Victimisation Questionnaire Revised-2 (JVQ R2). Health-related quality of life was assessed using the Duke Health Profile Adolescent Version (DHP-A). Bi-variate analyses and multiple linear regressions were conducted to assess the associations between individual forms of victimisation, poly-victimisation and HRQoL among girls and boys. In total 1616/1745 students (92.6 %) completed the questionnaire. Adolescent girls had significantly worse HRQoL than boys in all domains, except disability. Different forms of victimisation were associated with different HRQoL domains among girls and boys. Cyber victimisation was the most detrimental to girls' HRQoL while for boys maltreatment was the most detrimental. Experiences of poly-victimisation were associated with worse HRQoL in physical, mental, social and general health, lower levels of self-esteem and increased levels of anxiety, depression and pain domains among both sexes. Among Vietnamese adolescents, experiences of individual forms of victimisation were associated with poorer HRQoL in specific domains; the most detrimental forms of victimisation varied for girls and boys. However, it was experiences of poly-victimisation that had the most detrimental impacts on the HRQoL of both sexes. Recognition of violence, including poly-victimisation, is still low in Vietnam. These data indicate that community education, prevention and early intervention programs to reduce violent victimisation and assist adolescents who have experienced it, with attention to gender differences, are needed in Vietnam.

Geopolymers prepared from DC plasma treated air pollution control (APC) residues glass: properties and characterisation of the binder phase.

PubMed

Kourti, Ioanna; Devaraj, Amutha Rani; Bustos, Ana Guerrero; Deegan, David; Boccaccini, Aldo R; Cheeseman, Christopher R

2011-11-30

Air pollution control (APC) residues have been blended with glass-forming additives and treated using DC plasma technology to produce a high calcium aluminosilicate glass (APC glass). This has been used to form geopolymer-glass composites that exhibit high strength and density, low porosity, low water absorption, low leaching and high acid resistance. The composites have a microstructure consisting of un-reacted residual APC glass particles imbedded in a complex geopolymer and C-S-H gel binder phase, and behave as particle reinforced composites. The work demonstrates that materials prepared from DC plasma treated APC residues have potential to be used to form high quality pre-cast products. Copyright © 2011 Elsevier B.V. All rights reserved.

Bulk crystalline optomechanics

NASA Astrophysics Data System (ADS)

Renninger, W. H.; Kharel, P.; Behunin, R. O.; Rakich, P. T.

2018-06-01

Control of long-lived, high-frequency phonons using light offers a path towards creating robust quantum links, and could lead to tools for precision metrology with applications to quantum information processing. Optomechanical systems based on bulk acoustic-wave resonators are well suited for this goal in light of their high quality factors, and because they do not suffer from surface interactions as much as their microscale counterparts. However, so far these phonons have been accessible only electromechanically, using piezoelectric interactions. Here, we demonstrate customizable optomechanical coupling to macroscopic phonon modes of a bulk acoustic-wave resonator at cryogenic temperatures. These phonon modes, which are formed by shaping the surfaces of a crystal into a plano-convex phononic resonator, yield appreciable optomechanical coupling rates, providing access to high acoustic quality factors (4.2 × 107) at high phonon frequencies (13 GHz). This simple approach, which uses bulk properties rather than nanostructural control, is appealing for the ability to engineer optomechanical systems at high frequencies that are robust against thermal decoherence. Moreover, we show that this optomechanical system yields a unique form of dispersive symmetry-breaking that enables phonon heating or cooling without an optical cavity.

Rationale behind the near-ideal catalysis of Candida antarctica lipase A (CAL-A) for highly concentrating ω-3 polyunsaturated fatty acids into monoacylglycerols.

PubMed

He, Yongjin; Li, Jingbo; Kodali, Sitharam; Chen, Bilian; Guo, Zheng

2017-03-15

Dramatic decline in the quality and quantity of ω-3 PUFAs from marine resource demands new environmental-friendly technology to produce high quality ω-3 PUFAs concentrates in a better bioavailable form. Accordingly this work demonstrated an exceptionally highly efficient non-aqueous approach that non-regiospecific and non ω-3 PUFAs preferential Candida antarctica lipase A (CAL-A), functioning as a near-ideal biocatalyst, is capable to directly concentrate ω-3 PUFAs from 20% to 30% in oils to up to >90% in monoacylglycerols form through one step reaction. The rationale behind the experimental observation is justified and the catalytic property and specificity of an ideal enzyme tackling this task are defined. High selectivity and efficiency, excellent reusability of biocatalyst, general applicability for concentrating ω-3 PUFAs from both fish and microalgae oils, simple process for product recovery (e.g. by short path distillation), make this novel approach a highly industrially relevant and with potential application in food and drug industries. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Association between psychosocial aspects of work and quality of life among motorcycle taxi drivers].

PubMed

Teixeira, Jules Ramon Brito; Boery, Eduardo Nagib; Casotti, Cezar Augusto; Araújo, Tânia Maria de; Pereira, Rafael; Ribeiro, Ícaro José Santos; Rios, Marcela Andrade; Amorim, Camila Rego; Moreira, Ramon Missias; Boery, Rita Narriman Silva de Oliveira; Sales, Zenilda Nogueira

2015-01-01

This study aimed to evaluate the quality of life of motorcycle taxi drivers and the association with psychosocial characteristics of their work. This was a cross-sectional epidemiological study with a sample of 400 motorcycle taxi drivers in Jequié, Bahia State, Brazil. The study used a form containing demographic and socioeconomic data, WHO Quality of Life-Bref Questionnaire (WHOQOL-Bref), and the Job Content Questionnaire (JCQ). Motorcycle taxi drivers with greater decision-making control over their work showed better self-rated quality of life in the psychological domain; those with high psychological demands presented better self-rated quality of life in the social relations and environmental domains; those with high strain and active work showed better self-rated quality of life in the social and environmental domains. The psychosocial work environment and especially decision-making autonomy were thus important determinants of self-rated quality of life in this group of motorcycle taxi drivers.

The Six Principles of Facilities Stewardship

ERIC Educational Resources Information Center

Kaiser, Harvey H.; Klein, Eva

2010-01-01

Facilities stewardship means high-level and pervasive commitment to optimize capital investments, in order to achieve a high-functioning and attractive campus. It includes a major commitment to capital asset preservation and quality. Stewardship is about the long view of an institution's past and future. It ultimately forms the backdrop for…

The study about forming high-precision optical lens minimalized sinuous error structures for designed surface

NASA Astrophysics Data System (ADS)

Katahira, Yu; Fukuta, Masahiko; Katsuki, Masahide; Momochi, Takeshi; Yamamoto, Yoshihiro

2016-09-01

Recently, it has been required to improve qualities of aspherical lenses mounted on camera units. Optical lenses in highvolume production generally are applied with molding process using cemented carbide or Ni-P coated steel, which can be selected from lens material such as glass and plastic. Additionally it can be obtained high quality of the cut or ground surface on mold due to developments of different mold product technologies. As results, it can be less than 100nmPV as form-error and 1nmRa as surface roughness in molds. Furthermore it comes to need higher quality, not only formerror( PV) and surface roughness(Ra) but also other surface characteristics. For instance, it can be caused distorted shapes at imaging by middle spatial frequency undulations on the lens surface. In this study, we made focus on several types of sinuous structures, which can be classified into form errors for designed surface and deteriorate optical system performances. And it was obtained mold product processes minimalizing undulations on the surface. In the report, it was mentioned about the analyzing process by using PSD so as to evaluate micro undulations on the machined surface quantitatively. In addition, it was mentioned that the grinding process with circumferential velocity control was effective for large aperture lenses fabrication and could minimalize undulations appeared on outer area of the machined surface, and mentioned about the optical glass lens molding process by using the high precision press machine.

Binderless fiberboard from two different types of fiber furnishes

Treesearch

Otto Suchsland; George Woodson; Charles W. McMillin

1985-01-01

Fiber furnishes from two commercial processes were used to make experimental hardboards by all four possible methods: wet formed (pressed dry and wet), and dry formed (pressed dry and wet). Since no adhesives were added, all bonding was due to natural agents. Results of mechanical and physical testing of the hardboards indicated that high quality hardboard can be made...

Designing a curriculum on Internet health resources for deaf high school students.

PubMed

Gregg, Amy L; Wozar, Jody A; Wessel, Charles B; Epstein, Barbara A

2002-10-01

This paper examines the integration of instruction about quality health resources on the Internet into the health curriculum of a specialized high school for students with hearing disabilities. The Health Sciences Library System (HSLS) at the University of Pittsburgh has formed a partnership with the Western Pennsylvania School for the Deaf (WPSD). This project was partially funded through a subcontract with the National Library of Medicine. As one component of its Health Information for the Public project, HSLS formed a partnership with the WPSD. This partnership allowed for a librarian to provide instruction to health education and learning center teachers and students at WPSD about health resources on the Internet. This paper describes the planning process, curriculum development, and challenges encountered. These challenges include student knowledge of English as a second language, the need for a sign language interpreter, students' third-to-fourth-grade reading levels, and the need for appropriate visual presentations to accompany the audio counterpart. The partnership formed between HSLS and WPSD improved deaf high school students' ability to locate quality health information on the Internet. A pre-class survey and post-class survey were used to determine the impact of the instruction.

Development and validation of a protocol for optimizing the use of paraffin blocks in molecular epidemiological studies: The example from the HPV-AHEAD study.

PubMed

Mena, Marisa; Lloveras, Belen; Tous, Sara; Bogers, Johannes; Maffini, Fausto; Gangane, Nitin; Kumar, Rekha Vijay; Somanathan, Thara; Lucas, Eric; Anantharaman, Devasena; Gheit, Tarik; Castellsagué, Xavier; Pawlita, Michael; de Sanjosé, Silvia; Alemany, Laia; Tommasino, Massimo

2017-01-01

Worldwide use of formalin-fixed paraffin-embedded blocks (FFPE) is extensive in diagnosis and research. Yet, there is a lack of optimized/standardized protocols to process the blocks and verify the quality and presence of the targeted tissue. In the context of an international study on head and neck cancer (HNC)-HPV-AHEAD, a standardized protocol for optimizing the use of FFPEs in molecular epidemiology was developed and validated. First, a protocol for sectioning the FFPE was developed to prevent cross-contamination and distributed between participating centers. Before processing blocks, all sectioning centers underwent a quality control to guarantee a satisfactory training process. The first and last sections of the FFPEs were used for histopathological assessment. A consensus histopathology evaluation form was developed by an international panel of pathologists and evaluated for four indicators in a pilot analysis in order to validate it: 1) presence/type of tumor tissue, 2) identification of other tissue components that could affect the molecular diagnosis and 3) quality of the tissue. No HPV DNA was found in sections from empty FFPE generated in any histology laboratories of HPV-AHEAD consortium and all centers passed quality assurance for processing after quality control. The pilot analysis to validate the histopathology form included 355 HNC cases. The form was filled by six pathologists and each case was randomly assigned to two of them. Most samples (86%) were considered satisfactory. Presence of >50% of invasive carcinoma was observed in all sections of 66% of cases. Substantial necrosis (>50%) was present in <2% of samples. The concordance for the indicators targeted to validate the histopathology form was very high (kappa > 0.85) between first and last sections and fair to high between pathologists (kappa/pabak 0.21-0.72). The protocol allowed to correctly process without signs of contamination all FFPE of the study. The histopathology evaluation of the cases assured the presence of the targeted tissue, identified the presence of other tissues that could disturb the molecular diagnosis and allowed the assessment of tissue quality.

High-quality permanent draft genome sequence of Bradyrhizobium sp. Tv2a.2, a microsymbiont of Tachigali versicolor discovered in Barro Colorado Island of Panama

DOE PAGES

Tian, Rui; Parker, Matthew; Seshadri, Rekha; ...

2015-05-17

Bradyrhizobiumsp. Tv2a.2 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen-fixing root nodule of Tachigali versicolor collected in Barro Colorado Island of Panama. Here we describe the features of Bradyrhizobiumsp. Tv2a.2, together with high-quality permanent draft genome sequence information and annotation. The 8,496,279 bp high-quality draft genome is arranged in 87 scaffolds of 87 contigs, contains 8,109 protein-coding genes and 72 RNA-only encoding genes. In conclusion, this rhizobial genome was sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

In induced reconstructions of Si(1 1 1) as superlattice matched epitaxial templates for InN growth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuyyalil, Jithesh; Tangi, Malleswararao; Shivaprasad, S.M., E-mail: smsprasad@jncasr.ac.in

Graphical abstract: Display Omitted Highlights: ► A novel growth method to form InN at low growth temperatures. ► Use of Si reconstruction as a growth template for group III nitrides. ► Band gap variation of InN – Moss–Burstein shift – non-parabolic conduction band for InN. ► Super lattice matching epitaxy of metal induced reconstructions with III–V unit cell. -- Abstract: Indium induced surface reconstructions of Si(1 1 1)-7 × 7 are used as templates to grow high quality InN. We grow InN on Si(1 1 1)-7 × 7, Si(1 1 1)-4 × 1-In and Si(1 1 1)-1 × 1-In reconstructedmore » surfaces and study the quality of the films formed using complementary characterization tools. InN grown on Si(1 1 1)-1 × 1-In reconstruction shows superior film quality with lowest band-edge emission having a narrow full width at half maximum, intense and narrow 0 0 0 2 X-ray diffraction, low surface roughness and carrier concentration an order lower than other samples. We attribute the high quality of the film formed at 300 °C to the integral matching of InN and super lattice dimensions, we also study the reasons for the band gap variation of InN in the literature. Present study demonstrates the proposed Superlattice Matched Epitaxy can be a general approach to grow good quality InN at much lower growth temperature on compatible In induced reconstructions of the Si surface.« less

A novel technique for micro-hole forming on skull with the assistance of ultrasonic vibration.

PubMed

Li, Zhe; Yang, Daoguo; Hao, Weidong; Wu, Tiecheng; Wu, Song; Li, Xiaoping

2016-04-01

Micro-hole opening on skull is technically challenging and is hard to realize by micro-drilling. Low-stiffness of the drill bit is a serious drawback in micro-drilling. To deal with this problem, a novel ultrasonic vibration assisted micro-hole forming technique has been developed. Tip geometry and vibration amplitude are two key factors affecting the performance of this hole forming technique. To investigate their effects, experiment was carried out with 300μm diameter tools of three different tip geometries at three different vibration amplitudes. Hole forming performance was evaluated by the required thrust force, dimensional accuracy, exit burr and micro-structure of bone tissue around the generated hole. Based on the findings from current study, the 60° conically tipped tool helps generate a micro-hole of better quality at a smaller thrust force, and it is more suitable for hole forming than the 120° conically tipped tool and the blunt tipped tool. As for the vibration amplitude, when a larger amplitude is used, a micro-hole of better quality and higher dimensional accuracy can be formed at a smaller thrust force. Findings from this study would lay a technical foundation for accurately generating a high-quality micro-hole on skull, which enables minimally invasive insertion of a microelectrode into brain for neural activity measuring. Copyright © 2015 Elsevier Ltd. All rights reserved.

High quality factor surface Fabry-Perot cavity of acoustic waves

NASA Astrophysics Data System (ADS)

Xu, Yuntao; Fu, Wei; Zou, Chang-ling; Shen, Zhen; Tang, Hong X.

2018-02-01

Surface acoustic wave (SAW) resonators are critical components in wireless communications and many sensing applications. They have also recently emerged as a subject of study in quantum acoustics at the single phonon level. Acoustic loss reduction and mode confinement are key performance factors in SAW resonators. Here, we report the design and experimental realization of high quality factor Fabry-Perot SAW resonators formed in between the tapered phononic crystal mirrors patterned on a GaN-on-sapphire material platform. The fabricated SAW resonators are characterized by both an electrical network analyzer and an optical heterodyne vibrometer. We observed standing Rayleigh waves inside the cavity, with an intrinsic quality factor exceeding 1.3 × 104 at ambient conditions.

Author-paper affiliation network architecture influences the methodological quality of systematic reviews and meta-analyses of psoriasis

PubMed Central

Gomez-Garcia, Francisco; Alcalde-Mellado, Patricia; Gay-Mimbrera, Jesus; Aguilar-Luque, Macarena; Maestre-Lopez, Beatriz; Gonzalez-Padilla, Marcelino; Carmona-Fernandez, Pedro J.; Velez Garcia-Nieto, Antonio; Isla-Tejera, Beatriz

2017-01-01

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors’ collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews. PMID:28403245

Tests on a pilot plant for reheating desulfurized flue gases with the help of heat pipes

NASA Astrophysics Data System (ADS)

Schug, W.

1982-02-01

Desulfurized flue gases were reheated with a heat pipe heat exchanger. Finned heat pipes, with a coating or made of high quality steel were subjected to different operating conditions for 1000 hr. The coating proved to be unsuitable for heat transfer because it swells and detaches itself from the background material. The high quality steels showed pitting and surface corrosion. The possibilities of cleaning were also studied to prevent deposits forming on the heat pipes, but no solution was found.

Metals in Metal Salts: A Copper Mirror Demonstration

ERIC Educational Resources Information Center

Pike, Robert D.

2010-01-01

A simple lecture demonstration is described to show the latent presence of metal atoms in a metal salt. Copper(II) formate tetrahydrate is heated in a round-bottom flask forming a high-quality copper mirror.

Patient Experience and Satisfaction with Inpatient Service: Development of Short Form Survey Instrument Measuring the Core Aspect of Inpatient Experience

PubMed Central

Wong, Eliza L. Y.; Coulter, Angela; Hewitson, Paul; Cheung, Annie W. L.; Yam, Carrie H. K.; Lui, Siu fai; Tam, Wilson W. S.; Yeoh, Eng-kiong

2015-01-01

Patient experience reflects quality of care from the patients’ perspective; therefore, patients’ experiences are important data in the evaluation of the quality of health services. The development of an abbreviated, reliable and valid instrument for measuring inpatients’ experience would reflect the key aspect of inpatient care from patients’ perspective as well as facilitate quality improvement by cultivating patient engagement and allow the trends in patient satisfaction and experience to be measured regularly. The study developed a short-form inpatient instrument and tested its ability to capture a core set of inpatients’ experiences. The Hong Kong Inpatient Experience Questionnaire (HKIEQ) was established in 2010; it is an adaptation of the General Inpatient Questionnaire of the Care Quality Commission created by the Picker Institute in United Kingdom. This study used a consensus conference and a cross-sectional validation survey to create and validate a short-form of the Hong Kong Inpatient Experience Questionnaire (SF-HKIEQ). The short-form, the SF-HKIEQ, consisted of 18 items derived from the HKIEQ. The 18 items mainly covered relational aspects of care under four dimensions of the patient’s journey: hospital staff, patient care and treatment, information on leaving the hospital, and overall impression. The SF-HKIEQ had a high degree of face validity, construct validity and internal reliability. The validated SF-HKIEQ reflects the relevant core aspects of inpatients’ experience in a hospital setting. It provides a quick reference tool for quality improvement purposes and a platform that allows both healthcare staff and patients to monitor the quality of hospital care over time. PMID:25860775

CMOS technology: a critical enabler for free-form electronics-based killer applications

NASA Astrophysics Data System (ADS)

Hussain, Muhammad M.; Hussain, Aftab M.; Hanna, Amir

2016-05-01

Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today's CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics - and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path.

Homogeneous free-form directional backlight for 3D display

NASA Astrophysics Data System (ADS)

Krebs, Peter; Liang, Haowen; Fan, Hang; Zhang, Aiqin; Zhou, Yangui; Chen, Jiayi; Li, Kunyang; Zhou, Jianying

2017-08-01

Realization of a near perfect homogeneous secondary emission source for 3D display is proposed and demonstrated. The light source takes advantage of an array of free-form emission surface with a specially tailored light guiding structure, a light diffuser and Fresnel lens. A seamless and homogeneous directional emission is experimentally obtained which is essential for a high quality naked-eye 3D display.

Forming YBa2Cu3O7-x Superconductors On Copper Substrates

NASA Technical Reports Server (NTRS)

Mackenzie, J. Devin; Young, Stanley G.

1991-01-01

Experimental process forms layer of high-critical-temperature ceramic superconductor YBa2Cu3O7-x on surface of copper substrate. Offers possible solution to problem of finishing ceramic superconductors to required final sizes and shapes (difficult problem because these materials brittle and cannot be machined or bent). Further research necessary to evaluate superconducting qualities of surface layers and optimize process.

The Continuing Violence towards Disabled People

ERIC Educational Resources Information Center

Capewell, Carmel; Ralph, Sue; Bonnett, Liz

2015-01-01

Western society places high value on physical beauty and grace of movement, and tends to shun those who do not have these qualities. Disability hate crime highlights the modern form of this violence. This paper uses the high-profile case of Fiona Pilkington to examine how disability hate crime can be dismissed until it results in tragic…

Performance evaluation of traffic sensing and control devices : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

High quality sensing and control systems are essential for providing efficient signalized arterial operations. INDOT operates over 2600 traffic signal controllers, approximately 2000 of which use some form of vehicle detection. The private sector con...

High temperature superconductor step-edge Josephson junctions using Ti-Ca-Ba-Cu-O

DOEpatents

Ginley, David S.; Hietala, Vincent M.; Hohenwarter, Gert K. G.; Martens, Jon S.; Plut, Thomas A.; Tigges, Chris P.; Vawter, Gregory A.; Zipperian, Thomas E.

1994-10-25

A process for formulating non-hysteretic and hysteretic Josephson junctions using HTS materials which results in junctions having the ability to operate at high temperatures while maintaining high uniformity and quality. The non-hysteretic Josephson junction is formed by step-etching a LaAlO.sub.3 crystal substrate and then depositing a thin film of TlCaBaCuO on the substrate, covering the step, and forming a grain boundary at the step and a subsequent Josephson junction. Once the non-hysteretic junction is formed the next step to form the hysteretic Josephson junction is to add capacitance to the system. In the current embodiment, this is accomplished by adding a thin dielectric layer, LaA1O.sub.3, followed by a cap layer of a normal metal where the cap layer is formed by first depositing a thin layer of titanium (Ti) followed by a layer of gold (Au). The dielectric layer and the normal metal cap are patterned to the desired geometry.

A Novel Approach to High-Quality Postmortem Tissue Procurement: The GTEx Project.

PubMed

Carithers, Latarsha J; Ardlie, Kristin; Barcus, Mary; Branton, Philip A; Britton, Angela; Buia, Stephen A; Compton, Carolyn C; DeLuca, David S; Peter-Demchok, Joanne; Gelfand, Ellen T; Guan, Ping; Korzeniewski, Greg E; Lockhart, Nicole C; Rabiner, Chana A; Rao, Abhi K; Robinson, Karna L; Roche, Nancy V; Sawyer, Sherilyn J; Segrè, Ayellet V; Shive, Charles E; Smith, Anna M; Sobin, Leslie H; Undale, Anita H; Valentino, Kimberly M; Vaught, Jim; Young, Taylor R; Moore, Helen M

2015-10-01

The Genotype-Tissue Expression (GTEx) project, sponsored by the NIH Common Fund, was established to study the correlation between human genetic variation and tissue-specific gene expression in non-diseased individuals. A significant challenge was the collection of high-quality biospecimens for extensive genomic analyses. Here we describe how a successful infrastructure for biospecimen procurement was developed and implemented by multiple research partners to support the prospective collection, annotation, and distribution of blood, tissues, and cell lines for the GTEx project. Other research projects can follow this model and form beneficial partnerships with rapid autopsy and organ procurement organizations to collect high quality biospecimens and associated clinical data for genomic studies. Biospecimens, clinical and genomic data, and Standard Operating Procedures guiding biospecimen collection for the GTEx project are available to the research community.

A capillary zone electrophoresis method to detect conformers and dimers of antithrombin in therapeutic preparations.

PubMed

Marie, Anne-Lise; Tran, Nguyet Thuy; Saller, François; Abdou, Youmna Mohamed; Zeau, Pascal; Plantier, Jean-Luc; Urbain, Rémi; Borgel, Delphine; Taverna, Myriam

2016-07-01

Antithrombin (AT) is a human plasma glycoprotein that possesses anticoagulant and anti-inflammatory properties. However, the native (active) form of AT is unstable and undergoes conformational changes, leading to latent, cleaved, and heterodimeric forms. The presence of these alternative forms mostly inactive can highly impact the quality and therapeutic activity of pharmaceutical AT preparations. We developed a capillary zone electrophoresis method, based on a neutral polyethylene oxide-coated capillary and a buffer close to physiological conditions, enabling the separation of more than eight forms of AT. Several peaks were identified as native, latent, and heterodimeric forms. The CZE method was reproducible with intraday relative standard deviations less than 0.5 and 2% for migration times and peak areas, respectively. The method was applied to the comparison of AT preparations produced by five competitive pharmaceutical companies, and statistical tests were performed. Important differences in the proportion of each form were highlighted. In particular, one AT preparation was shown to contain a high quantity of heterodimer, and two preparations contained high quantities of latent form. In addition, one AT preparation exhibited additional forms, not yet identified. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Sample size determination for bibliographic retrieval studies

PubMed Central

Yao, Xiaomei; Wilczynski, Nancy L; Walter, Stephen D; Haynes, R Brian

2008-01-01

Background Research for developing search strategies to retrieve high-quality clinical journal articles from MEDLINE is expensive and time-consuming. The objective of this study was to determine the minimal number of high-quality articles in a journal subset that would need to be hand-searched to update or create new MEDLINE search strategies for treatment, diagnosis, and prognosis studies. Methods The desired width of the 95% confidence intervals (W) for the lowest sensitivity among existing search strategies was used to calculate the number of high-quality articles needed to reliably update search strategies. New search strategies were derived in journal subsets formed by 2 approaches: random sampling of journals and top journals (having the most high-quality articles). The new strategies were tested in both the original large journal database and in a low-yielding journal (having few high-quality articles) subset. Results For treatment studies, if W was 10% or less for the lowest sensitivity among our existing search strategies, a subset of 15 randomly selected journals or 2 top journals were adequate for updating search strategies, based on each approach having at least 99 high-quality articles. The new strategies derived in 15 randomly selected journals or 2 top journals performed well in the original large journal database. Nevertheless, the new search strategies developed using the random sampling approach performed better than those developed using the top journal approach in a low-yielding journal subset. For studies of diagnosis and prognosis, no journal subset had enough high-quality articles to achieve the expected W (10%). Conclusion The approach of randomly sampling a small subset of journals that includes sufficient high-quality articles is an efficient way to update or create search strategies for high-quality articles on therapy in MEDLINE. The concentrations of diagnosis and prognosis articles are too low for this approach. PMID:18823538

Information retrieval based on single-pixel optical imaging with quick-response code

NASA Astrophysics Data System (ADS)

Xiao, Yin; Chen, Wen

2018-04-01

Quick-response (QR) code technique is combined with ghost imaging (GI) to recover original information with high quality. An image is first transformed into a QR code. Then the QR code is treated as an input image in the input plane of a ghost imaging setup. After measurements, traditional correlation algorithm of ghost imaging is utilized to reconstruct an image (QR code form) with low quality. With this low-quality image as an initial guess, a Gerchberg-Saxton-like algorithm is used to improve its contrast, which is actually a post processing. Taking advantage of high error correction capability of QR code, original information can be recovered with high quality. Compared to the previous method, our method can obtain a high-quality image with comparatively fewer measurements, which means that the time-consuming postprocessing procedure can be avoided to some extent. In addition, for conventional ghost imaging, the larger the image size is, the more measurements are needed. However, for our method, images with different sizes can be converted into QR code with the same small size by using a QR generator. Hence, for the larger-size images, the time required to recover original information with high quality will be dramatically reduced. Our method makes it easy to recover a color image in a ghost imaging setup, because it is not necessary to divide the color image into three channels and respectively recover them.

Assessment of Quality of Life in a Cohort of Newly Diagnosed Patients on HAART Regimen, in Resource Restricted Tribal Region of Chhattisgarh, India: A Prospective Study

PubMed Central

Singh, Harminder; Kaur, Kamalpreet; Dulhani, Navin; Bansal, Akash; Kumar, Bithika N.; Chouhan, Vinod Kumar Singh

2013-01-01

Background: Highly active antiretroviral therapy regimens have resulted in the systemic/clinical healing for human immune deficiency virus-infected patients but the consequence of antiretroviral therapy on the whole quality of life has become a major concern. The current study correlates the relationship of quality of life with successful highly active antiretroviral therapy. Aim: To determine the health-related quality of life in human immune deficiency virus-infected patients on highly active anti-retroviral therapy regimen in tribal region of Chhattisgarh. Design: An open label prospective study. Materials and Methods: Health-related quality of life was assessed using a standardized questionnaire, the Medical Outcomes Survey Short Form 36. Physical health summary scores and mental health summary scores were compared of pre-Highly Active Anti-Retroviral Therapy (at baseline) and post 12 months of therapy. Results: The increase in CD4 cell counts was extremely significant (P < 0.0001). The Physical Composite Summary (P value = 0.0003) improved significantly, whereas the Mental Composite Summary (with a baseline value of 40.7), post 12 months, was calculated as 42.8 (P value = 0.2371) and was statistically not significant. Conclusion: Efficacy measurement is the key ingredient of highly active anti-retroviral therapy, which must also include assessment of health-related quality of life to maximize the holistic approach towards disease. PMID:24049364

Quality of life of patients undergoing surgery by videolaparoscopy for GERD treatment.

PubMed

Andrade, Francisco José Cavalcante; de Almeida, Eliete Rodrigues; dos Santos, Maria Teresa Botti Rodrigues; Soares-Filho, Eurípedes; Lopes, João Batista; Veras e Silva, Roberto Cavalcante

2012-01-01

Gastroesophageal reflux disease is a chronic disease of high prevalence in Western countries, with negative effects on quality of life. Surgery is indicated for patients with intolerance to continuous medication, prolonged treatment or control, or in complicated forms of the disease. To evaluate the quality of life of patients undergoing surgery by videolaparoscopy for gastroesophageal reflux disease treatment. Sample comprised 43 patients of both genders (mean age = 51.4 years). For quality of life evaluation was made using the questionnaire Gastroesophageal Reflux Disease Health Related Quality of Life, translated and validated into Portuguese. Data were analyzed by Epi Info version 3.5.1, using Duncan test and Pearson's correlation coefficient, with 5% for null hypothesis (p ≤ 0.05). Over 50% of participants showed good quality of life (scores <5 of the questionnaire), more than 90% indicated satisfaction with their health. A significant positive correlation between most variables related to heartburn and the time after surgery was observed (p ≤ 0.05). Patients presented good quality of life and high level of satisfaction with their postoperative condition.

Microwave plasma assisted supersonic gas jet deposition of thin film materials

DOEpatents

Schmitt, III, Jerome J.; Halpern, Bret L.

1993-01-01

An apparatus for fabricating thin film materials utilizing high speed gas dynamics relies on supersonic free jets of carrier gas to transport depositing vapor species generated in a microwave discharge to the surface of a prepared substrate where the vapor deposits to form a thin film. The present invention generates high rates of deposition and thin films of unforeseen high quality at low temperatures.

High-quality permanent draft genome sequence of the Parapiptadenia rigida-nodulating Cupriavidus sp. strain UYPR2.512

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Meyer, Sofie E.; Fabiano, Elena; Tian, Rui

Cupriavidus sp. strain UYPR2.512 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a root nodule of Parapiptadenia rigida grown in soils from a native forest of Uruguay. Here we describe the features of Cupriavidus sp. strain UYPR2.512, together with sequence and annotation. We find the 7,858,949 bp high-quality permanent draft genome is arranged in 365 scaffolds of 369 contigs, contains 7,411 protein-coding genes and 76 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.

High-quality permanent draft genome sequence of the Parapiptadenia rigida-nodulating Cupriavidus sp. strain UYPR2.512

DOE PAGES

De Meyer, Sofie E.; Fabiano, Elena; Tian, Rui; ...

2015-04-11

Cupriavidus sp. strain UYPR2.512 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a root nodule of Parapiptadenia rigida grown in soils from a native forest of Uruguay. Here we describe the features of Cupriavidus sp. strain UYPR2.512, together with sequence and annotation. We find the 7,858,949 bp high-quality permanent draft genome is arranged in 365 scaffolds of 369 contigs, contains 7,411 protein-coding genes and 76 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.

Electromagnetic properties of baryon resonances

NASA Astrophysics Data System (ADS)

Tiator, Lothar

2013-10-01

Longitudinal and transverse transition form factors for most of the four-star nucleon resonances have been obtained from high-quality cross section data and polarization observables measured at MAMI, ELSA, BATES, GRAAL and CEBAF. As an application, we further show how the transition form factors can be used to obtain empirical transverse charge densities. Contour plots of the thus derived densities are shown and compared for the Roper and S11 nucleon resonances.

Designing a curriculum on Internet health resources for deaf high school students*

PubMed Central

Gregg, Amy L.; Wozar, Jody A.; Wessel, Charles B.; Epstein, Barbara A.

2002-01-01

Purpose: This paper examines the integration of instruction about quality health resources on the Internet into the health curriculum of a specialized high school for students with hearing disabilities. Setting/Participants/Resources: The Health Sciences Library System (HSLS) at the University of Pittsburgh has formed a partnership with the Western Pennsylvania School for the Deaf (WPSD). Brief Description: This project was partially funded through a subcontract with the National Library of Medicine. As one component of its Health Information for the Public project, HSLS formed a partnership with the WPSD. This partnership allowed for a librarian to provide instruction to health education and learning center teachers and students at WPSD about health resources on the Internet. This paper describes the planning process, curriculum development, and challenges encountered. These challenges include student knowledge of English as a second language, the need for a sign language interpreter, students' third-to-fourth-grade reading levels, and the need for appropriate visual presentations to accompany the audio counterpart. Results/Outcome: The partnership formed between HSLS and WPSD improved deaf high school students' ability to locate quality health information on the Internet. Evaluation Method: A pre-class survey and post-class survey were used to determine the impact of the instruction. PMID:12398249

High Performance OLED Panel and Luminaire

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spindler, Jeffrey

2017-02-20

In this project, OLEDWorks developed and demonstrated the technology required to produce OLED lighting panels with high energy efficiency and excellent light quality. OLED panels developed in this program produce high quality warm white light with CRI greater than 85 and efficacy up to 80 lumens per watt (LPW). An OLED luminaire employing 24 of the high performance panels produces practical levels of illumination for general lighting, with a flux of over 2200 lumens at 60 LPW. This is a significant advance in the state of the art for OLED solid-state lighting (SSL), which is expected to be a complementarymore » light source to the more advanced LED SSL technology that is rapidly replacing all other traditional forms of lighting.« less

Relationships between social support and depression, and quality of life of the elderly in a rural community in Malaysia.

PubMed

Ibrahim, Norhayati; Din, Normah Che; Ahmad, Mahadir; Ghazali, Shazli Ezzat; Said, Zaini; Shahar, Suzana; Ghazali, Ahmad Rohi; Razali, Rosdinom

2013-04-01

This study aimed to examine the role of social support and depression in predicting the quality of life among the elderly living in a rural Federal Land Development Authority (FELDA) community in Malaysia. A total of 162 elderly settlers of FELDA Sungai Tengi, aged 60 years and above, were selected by universal sampling method in this cross-sectional study. Three standardized instruments - the 12-item Short Form (SF-12), 15-item Geriatric Depression Scale (GDS-15) and Medical Outcome Study Social Support (MOS-Social Support) - were used to assess for quality of life, depression and social support. Quality of life of the elderly people in this community was high, especially in terms of physical components as compared to mental components. The mean scores for emotional role in the SF-12 was relatively the highest (90.74 ± 21.59) with social functioning being the lowest (30.35 ± 22.29). The results also showed that the mean value was higher for physical component summary (74.40) as compared to mental component summary (51.51). Approximately 23.5% suffered mild depression and only 2.5% had severe depression. This study showed that the elderly FELDA settlers have a high quality of life, mainly on the physical components of life and low rate of severe depression, a positive indicator of their psychological well-being. Social support in the form of emotional/informational support, and depression were significant factors related to their good quality of life. Copyright © 2013 Wiley Publishing Asia Pty Ltd.

48 CFR 2453.246 - Quality Assurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance. ...

Implementation of dictionary pair learning algorithm for image quality improvement

NASA Astrophysics Data System (ADS)

Vimala, C.; Aruna Priya, P.

2018-04-01

This paper proposes an image denoising on dictionary pair learning algorithm. Visual information is transmitted in the form of digital images is becoming a major method of communication in the modern age, but the image obtained after transmissions is often corrupted with noise. The received image needs processing before it can be used in applications. Image denoising involves the manipulation of the image data to produce a visually high quality image.

Multi-objective optimization of process parameters of multi-step shaft formed with cross wedge rolling based on orthogonal test

NASA Astrophysics Data System (ADS)

Han, S. T.; Shu, X. D.; Shchukin, V.; Kozhevnikova, G.

2018-06-01

In order to achieve reasonable process parameters in forming multi-step shaft by cross wedge rolling, the research studied the rolling-forming process multi-step shaft on the DEFORM-3D finite element software. The interactive orthogonal experiment was used to study the effect of the eight parameters, the first section shrinkage rate φ1, the first forming angle α1, the first spreading angle β1, the first spreading length L1, the second section shrinkage rate φ2, the second forming angle α2, the second spreading angle β2 and the second spreading length L2, on the quality of shaft end and the microstructure uniformity. By using the fuzzy mathematics comprehensive evaluation method and the extreme difference analysis, the influence degree of the process parameters on the quality of the multi-step shaft is obtained: β2>φ2L1>α1>β1>φ1>α2L2. The results of the study can provide guidance for obtaining multi-stepped shaft with high mechanical properties and achieving near net forming without stub bar in cross wedge rolling.

High quality self-separated GaN crystal grown on a novel nanoporous template by HVPE.

PubMed

Huo, Qin; Shao, Yongliang; Wu, Yongzhong; Zhang, Baoguo; Hu, Haixiao; Hao, Xiaopeng

2018-02-16

In this study, a novel nanoporous template was obtained by a two-step etching process from MOCVD-GaN/Al 2 O 3 (MGA) with electrochemical etching sequentially followed by chemical wet etching. The twice-etched MOCVD-GaN/Al 2 O 3 (TEMGA) templates were utilized to grow GaN crystals by hydride vapor phase epitaxy (HVPE) method. The GaN crystals were separated spontaneously from the TEMGA template with the assistance of voids formed by the etched nanopores. Several techniques were utilized to characterize the quality of the free-standing GaN crystals obtained from the TEMGA template. Results showed that the quality of the as-obtained GaN crystals was improved obviously compared with those grown on the MGA. This convenient technique can be applied to grow high-quality free-standing GaN crystals.

The curse of invertase

USDA-ARS?s Scientific Manuscript database

Among the greatest quality concerns for chip and fry processing potato tubers are cold-induced sweetening, sugar end defects, translucent ends, stem-end chip defect and high acrylamide-forming potential. These problems all result from elevated amounts of glucose and fructose, reducing sugars produce...

Marketing Education Program Management Guide.

ERIC Educational Resources Information Center

Blair, Betty; And Others

This guide was designed for use by marketing education teacher-coordinators and administrators in implementing marketing education programs. The document includes the following: an overall picture of administrative responsibilities related to high quality programs, guidelines and forms needed to deliver effective instruction, resources and…

Determination of equilibrium dissociation constants for recombinant antibodies by high-throughput affinity electrophoresis.

PubMed

Pan, Yuchen; Sackmann, Eric K; Wypisniak, Karolina; Hornsby, Michael; Datwani, Sammy S; Herr, Amy E

2016-12-23

High-quality immunoreagents enhance the performance and reproducibility of immunoassays and, in turn, the quality of both biological and clinical measurements. High quality recombinant immunoreagents are generated using antibody-phage display. One metric of antibody quality - the binding affinity - is quantified through the dissociation constant (K D ) of each recombinant antibody and the target antigen. To characterize the K D of recombinant antibodies and target antigen, we introduce affinity electrophoretic mobility shift assays (EMSAs) in a high-throughput format suitable for small volume samples. A microfluidic card comprised of free-standing polyacrylamide gel (fsPAG) separation lanes supports 384 concurrent EMSAs in 30 s using a single power source. Sample is dispensed onto the microfluidic EMSA card by acoustic droplet ejection (ADE), which reduces EMSA variability compared to sample dispensing using manual or pin tools. The K D for each of a six-member fragment antigen-binding fragment library is reported using ~25-fold less sample mass and ~5-fold less time than conventional heterogeneous assays. Given the form factor and performance of this micro- and mesofluidic workflow, we have developed a sample-sparing, high-throughput, solution-phase alternative for biomolecular affinity characterization.

Determination of equilibrium dissociation constants for recombinant antibodies by high-throughput affinity electrophoresis

PubMed Central

Pan, Yuchen; Sackmann, Eric K.; Wypisniak, Karolina; Hornsby, Michael; Datwani, Sammy S.; Herr, Amy E.

2016-01-01

High-quality immunoreagents enhance the performance and reproducibility of immunoassays and, in turn, the quality of both biological and clinical measurements. High quality recombinant immunoreagents are generated using antibody-phage display. One metric of antibody quality – the binding affinity – is quantified through the dissociation constant (KD) of each recombinant antibody and the target antigen. To characterize the KD of recombinant antibodies and target antigen, we introduce affinity electrophoretic mobility shift assays (EMSAs) in a high-throughput format suitable for small volume samples. A microfluidic card comprised of free-standing polyacrylamide gel (fsPAG) separation lanes supports 384 concurrent EMSAs in 30 s using a single power source. Sample is dispensed onto the microfluidic EMSA card by acoustic droplet ejection (ADE), which reduces EMSA variability compared to sample dispensing using manual or pin tools. The KD for each of a six-member fragment antigen-binding fragment library is reported using ~25-fold less sample mass and ~5-fold less time than conventional heterogeneous assays. Given the form factor and performance of this micro- and mesofluidic workflow, we have developed a sample-sparing, high-throughput, solution-phase alternative for biomolecular affinity characterization. PMID:28008969

Developing a scale for quality of life in pediatric oncology patients aged 7-12--children and parent forms.

PubMed

Kudubes, Asli Akdeniz; Bektas, Murat

2015-01-01

This study was planned in an attempt to develop a scale for the quality of life in pediatric oncology patients aged 7-12, with child and parents forms. In collecting the study data, we used the Child and Parent Information Form, Visual Quality of Life Scale, Scale for Quality of Life Pediatric Oncology Patients Aged 7-12 and the Scale for the Quality of Life in Pediatric Oncology Patients Aged 7-12 for Parents. We also used Pearson correlation analysis, the Cronbach alpha coefficient, factor analysis and ROC analysis for the study data. In this study, the total Cronbach alpha value of the parent form was 0.96, the total factor load being 0.54-0.90 and the total variance explained was 82.5%. The cutoff point of the parent form was 93 points. The total Cronbach alpha value for the child form was 0.96, with a total factor load of 0.55-0.91 and the total variance being explained was 78.3%. The cutoff point of the child form was 65 points. This study suggests that the Scale for Quality of Life in Pediatric Oncology Patients Aged 7-12 Child and Parents Forms are valid and reliable instruments in assessing the quality of life of children.

Using Lagrangian Coherent Structures to understand coastal water quality

NASA Astrophysics Data System (ADS)

Fiorentino, L. A.; Olascoaga, M. J.; Reniers, A.; Feng, Z.; Beron-Vera, F. J.; MacMahan, J. H.

2012-09-01

The accumulation of pollutants near the shoreline can result in low quality coastal water with negative effects on human health. To understand the role of mixing by tidal flows in coastal water quality we study the nearshore Lagrangian circulation. Specifically, we reveal Lagrangian Coherent Structures (LCSs), i.e., distinguished material curves which shape global mixing patterns and thus act as skeletons of the Lagrangian circulation. This is done using the recently developed geodesic theory of transport barriers. Particular focus is placed on Hobie Beach, a recreational subtropical marine beach located in Virginia Key, Miami, Florida. According to studies of water quality, Hobie Beach is characterized by high microbial levels. Possible sources of pollution in Hobie Beach include human bather shedding, dog fecal matter, runoff, and sand efflux at high tides. Consistent with the patterns formed by satellite-tracked drifter trajectories, the LCSs extracted from simulated currents reveal a Lagrangian circulation favoring the retention near the shoreline of pollutants released along the shoreline, which can help explain the low quality water registered at Hobie Beach.

Control of Ga-oxide interlayer growth and Ga diffusion in SiO2/GaN stacks for high-quality GaN-based metal-oxide-semiconductor devices with improved gate dielectric reliability

NASA Astrophysics Data System (ADS)

Yamada, Takahiro; Watanabe, Kenta; Nozaki, Mikito; Yamada, Hisashi; Takahashi, Tokio; Shimizu, Mitsuaki; Yoshigoe, Akitaka; Hosoi, Takuji; Shimura, Takayoshi; Watanabe, Heiji

2018-01-01

A simple and feasible method for fabricating high-quality and highly reliable GaN-based metal-oxide-semiconductor (MOS) devices was developed. The direct chemical vapor deposition of SiO2 films on GaN substrates forming Ga-oxide interlayers was carried out to fabricate SiO2/GaO x /GaN stacked structures. Although well-behaved hysteresis-free GaN-MOS capacitors with extremely low interface state densities below 1010 cm-2 eV-1 were obtained by postdeposition annealing, Ga diffusion into overlying SiO2 layers severely degraded the dielectric breakdown characteristics. However, this problem was found to be solved by rapid thermal processing, leading to the superior performance of the GaN-MOS devices in terms of interface quality, insulating property, and gate dielectric reliability.

Multi-Stage Open Peer Review: Scientific Evaluation Integrating the Strengths of Traditional Peer Review with the Virtues of Transparency and Self-Regulation

PubMed Central

Pöschl, Ulrich

2012-01-01

The traditional forms of scientific publishing and peer review do not live up to all demands of efficient communication and quality assurance in today’s highly diverse and rapidly evolving world of science. They need to be advanced and complemented by interactive and transparent forms of review, publication, and discussion that are open to the scientific community and to the public. The advantages of open access, public peer review, and interactive discussion can be efficiently and flexibly combined with the strengths of traditional scientific peer review. Since 2001 the benefits and viability of this approach are clearly demonstrated by the highly successful interactive open access journal Atmospheric Chemistry and Physics (ACP, www.atmos-chem-phys.net) and a growing number of sister journals launched and operated by the European Geosciences Union (EGU, www.egu.eu) and the open access publisher Copernicus (www.copernicus.org). The interactive open access journals are practicing an integrative multi-stage process of publication and peer review combined with interactive public discussion, which effectively resolves the dilemma between rapid scientific exchange and thorough quality assurance. Key features and achievements of this approach are: top quality and impact, efficient self-regulation and low rejection rates, high attractivity and rapid growth, low costs, and financial sustainability. In fact, ACP and the EGU interactive open access sister journals are by most if not all standards more successful than comparable scientific journals with traditional or alternative forms of peer review (editorial statistics, publication statistics, citation statistics, economic costs, and sustainability). The high efficiency and predictive validity of multi-stage open peer review have been confirmed in a series of dedicated studies by evaluation experts from the social sciences, and the same or similar concepts have recently also been adopted in other disciplines, including the life sciences and economics. Multi-stage open peer review can be flexibly adjusted to the needs and peculiarities of different scientific communities. Due to the flexibility and compatibility with traditional structures of scientific publishing and peer review, the multi-stage open peer review concept enables efficient evolution in scientific communication and quality assurance. It has the potential for swift replacement of hidden peer review as the standard of scientific quality assurance, and it provides a basis for open evaluation in science. PMID:22783183

Precision injection molding of freeform optics

NASA Astrophysics Data System (ADS)

Fang, Fengzhou; Zhang, Nan; Zhang, Xiaodong

2016-08-01

Precision injection molding is the most efficient mass production technology for manufacturing plastic optics. Applications of plastic optics in field of imaging, illumination, and concentration demonstrate a variety of complex surface forms, developing from conventional plano and spherical surfaces to aspheric and freeform surfaces. It requires high optical quality with high form accuracy and lower residual stresses, which challenges both optical tool inserts machining and precision injection molding process. The present paper reviews recent progress in mold tool machining and precision injection molding, with more emphasis on precision injection molding. The challenges and future development trend are also discussed.

Watching Galaxy Evolution in High Definition

NASA Technical Reports Server (NTRS)

Rigby, Jane

2011-01-01

As Einstein predicted, mass deflects light. In hundreds of known cases, "gravitational lenses" have deflected, distorted, and amplified images of galaxies or quasars behind them. As such, gravitational lensing is a way to "cheat" at studying how galaxies evolve, because lensing can magnify galaxies by factors of 10--100 times, transforming them from objects we can barely detect to bright objects we can study in detail. I'll summarize new results from a comprehensive program, using multi-wavelength, high-quality spectroscopy, to study how galaxies formed stars at redshifts of 1--3, the epoch when most of the Universe's stars were formed.

Watching Galaxy Evolution in High Definition

NASA Technical Reports Server (NTRS)

Rigby, Jane R.

2012-01-01

As Einstein predicted, mass deflects light. In hundreds of known cases, "gravitational lenses" have deflected, distorted, and amplified images of galaxies or quasars behind them. As such, gravitational lensing is a way to "cheat" at studying how galaxies evolve, because lensing can magnify galaxies by factors of 10-100 times, transforming them from objects we can barely detect to bright objects we can study in detail. I'll summarize new results from a comprehensive program, using multi-wavelength, high-quality spectroscopy, to study how galaxies formed stars at redshifts of 1-3, the epoch when most of the Universe's stars were formed.

Epitaxial CoSi2 on MOS devices

DOEpatents

Lim, Chong Wee; Shin, Chan Soo; Petrov, Ivan Georgiev; Greene, Joseph E.

2005-01-25

An Si.sub.x N.sub.y or SiO.sub.x N.sub.y liner is formed on a MOS device. Cobalt is then deposited and reacts to form an epitaxial CoSi.sub.2 layer underneath the liner. The CoSi.sub.2 layer may be formed through a solid phase epitaxy or reactive deposition epitaxy salicide process. In addition to high quality epitaxial CoSi.sub.2 layers, the liner formed during the invention can protect device portions during etching processes used to form device contacts. The liner can act as an etch stop layer to prevent excessive removal of the shallow trench isolation, and protect against excessive loss of the CoSi.sub.2 layer.

Microwave plasma assisted supersonic gas jet deposition of thin film materials

DOEpatents

Schmitt, J.J. III; Halpern, B.L.

1993-10-26

An apparatus for fabricating thin film materials utilizing high speed gas dynamics relies on supersonic free jets of carrier gas to transport depositing vapor species generated in a microwave discharge to the surface of a prepared substrate where the vapor deposits to form a thin film. The present invention generates high rates of deposition and thin films of unforeseen high quality at low temperatures. 5 figures.

Synthesis of high aspect ratio ZnO nanowires with an inexpensive handcrafted electrochemical setup

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taheri, Ali, E-mail: at1361@aut.ac.ir, E-mail: atahery@aeoi.org.ir; Saramad, Shahyar; Setayeshi, Saeed

In this work, high aspect ratio zinc oxide nanowires are synthesized using templated one-step electrodeposition technique. Electrodeposition of the nanowires is done using a handcrafted electronic system. Nuclear track-etched polycarbonate membrane is used as a template to form the high aspect ratio nanowires. The result of X-ray diffraction and scanning electron microscopy shows that nanowires with a good crystallinity and an aspect ratio of more than 30 can be achieved in a suitable condition. The height of electrodeposited nanowires reaches to about 11 μm. Based on the obtained results, high aspect ratio ZnO nanowires can be formed using inexpensive electrodepositionmore » setup with an acceptable quality.« less

Water quality assessment and meta model development in Melen watershed - Turkey.

PubMed

Erturk, Ali; Gurel, Melike; Ekdal, Alpaslan; Tavsan, Cigdem; Ugurluoglu, Aysegul; Seker, Dursun Zafer; Tanik, Aysegul; Ozturk, Izzet

2010-07-01

Istanbul, being one of the highly populated metropolitan areas of the world, has been facing water scarcity since the past decade. Water transfer from Melen Watershed was considered as the most feasible option to supply water to Istanbul due to its high water potential and relatively less degraded water quality. This study consists of two parts. In the first part, water quality data covering 26 parameters from 5 monitoring stations were analyzed and assessed due to the requirements of the "Quality Required of Surface Water Intended for the Abstraction of Drinking Water" regulation. In the second part, a one-dimensional stream water quality model with simple water quality kinetics was developed. It formed a basic design for more advanced water quality models for the watershed. The reason for assessing the water quality data and developing a model was to provide information for decision making on preliminary actions to prevent any further deterioration of existing water quality. According to the water quality assessment at the water abstraction point, Melen River has relatively poor water quality with regard to NH(4)(+), BOD(5), faecal streptococcus, manganese and phenol parameters, and is unsuitable for drinking water abstraction in terms of COD, PO(4)(3-), total coliform, total suspended solids, mercury and total chromium parameters. The results derived from the model were found to be consistent with the water quality assessment. It also showed that relatively high inorganic nitrogen and phosphorus concentrations along the streams are related to diffuse nutrient loads that should be managed together with municipal and industrial wastewaters. Copyright 2010 Elsevier Ltd. All rights reserved.

High-quality permanent draft genome sequence of Rhizobium sullae strain WSM1592; a Hedysarum coronarium microsymbiont from Sassari, Italy

DOE PAGES

Yates, Ron; Howieson, John; De Meyer, Sofie E.; ...

2015-07-24

Rhizobium sullae strain WSM1592 is an aerobic, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen (N2) fixing root nodule formed on the short-lived perennial legume Hedysarum coronarium (also known as Sulla coronaria or Sulla). WSM1592 was isolated from a nodule recovered from H. coronarium roots located in Ottava, bordering Sassari, Sardinia in 1995. WSM1592 is highly effective at fixing nitrogen with H. coronarium, and is currently the commercial Sulla inoculant strain in Australia. Here we describe the features of R. sullae strain WSM1592, together with genome sequence information and its annotation. The 7,530,820 bp high-quality permanent draft genomemore » is arranged into 118 scaffolds of 118 contigs containing 7.453 protein-coding genes and 73 RNA-only encoding genes. In conclusion, this rhizobial genome is sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.« less

Formation of boron nitride coatings on silicon carbide fibers using trimethylborate vapor

NASA Astrophysics Data System (ADS)

Yuan, Mengjiao; Zhou, Tong; He, Jing; Chen, Lifu

2016-09-01

High quality boron nitride (BN) coatings have been grown on silicon carbide (SiC) fibers by carbothermal nitridation and at atmospheric pressure. SiC fibers were first treated in chlorine gas to form CDC (carbide-derived carbon) film on the fiber surface. The CDC-coated SiC fibers were then reacted with trimethylborate vapor and ammonia vapor at high temperature, forming BN coatings by carbothermal reduction. The FT-IR, XPS, XRD, SEM, TEM and AES were used to investigate the formation of the obtained coatings. It has been found that the obtained coatings are composed of phase mixture of h-BN and amorphous carbon, very uniform in thickness, have smooth surface and adhere well with the SiC fiber substrates. The BN-coated SiC fibers retain ∼80% strength of the as-received SiC fibers and show an obvious interfacial debonding and fiber pullout in the SiCf/SiOC composites. This method may be useful for the large scale production of high quality BN coating on silicon carbide fiber.

Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

NASA Astrophysics Data System (ADS)

Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

2016-10-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

Assessment and mapping of water pollution indices in zone-III of municipal corporation of hyderabad using remote sensing and geographic information system.

PubMed

Asadi, S S; Vuppala, Padmaja; Reddy, M Anji

2005-01-01

A preliminary survey of area under Zone-III of MCH was undertaken to assess the ground water quality, demonstrate its spatial distribution and correlate with the land use patterns using advance techniques of remote sensing and geographical information system (GIS). Twenty-seven ground water samples were collected and their chemical analysis was done to form the attribute database. Water quality index was calculated from the measured parameters, based on which the study area was classified into five groups with respect to suitability of water for drinking purpose. Thematic maps viz., base map, road network, drainage and land use/land cover were prepared from IRS ID PAN + LISS III merged satellite imagery forming the spatial database. Attribute database was integrated with spatial sampling locations map in Arc/Info and maps showing spatial distribution of water quality parameters were prepared in Arc View. Results indicated that high concentrations of total dissolved solids (TDS), nitrates, fluorides and total hardness were observed in few industrial and densely populated areas indicating deteriorated water quality while the other areas exhibited moderate to good water quality.

Optical properties of doped sol-gel silica glasses

NASA Astrophysics Data System (ADS)

King, Terence A.

1994-01-01

Sol-gel optical composites were developed and characterized for potential applications in optics, lasers, nonlinear optics, and optoelectronics. Post-doped xerogels were index matched by in-situ polymerization of monomers to form inorganic-organic composites of low scatter and high optical quality. Characterization of the microstructure was made by visible and IR absorption and Raman Spectroscopy and optical quality by attenuation and scatter measurement. Doping techniques were optimized using hypercritical drying and vacuum impregnation and doping distribution monitored by laser-induced fluorescence. One-tenth wavelength surfaces were formed by novel optical polishing. Organic molecular dopants were tested in laser and nonlinear systems. Initial third harmonic generation and Z-scan measurements have shown the potential for saturable absorption and optical limiting.

[Medical emergencies and sea rescue].

PubMed

Lefebvre, Fabien; Albert, Christophe; Gunepin, David; Pondaven, Eric; Querellou, Emgan

2013-01-01

Military nurses and doctors are on permanent standby to respond to any medical emergency which may arise at sea. This atypical form of practice is part of a specific organisation, in order to provide optimal, high-quality care in the most remote places of the oceans.

Forming n/p Junctions With An Excimer Laser

NASA Technical Reports Server (NTRS)

Alexander, Paul, Jr.; Campbell, Robert B.; Wong, David C.; Bottenberg, William L.; Byron, Stanley

1988-01-01

Compact equipment yields high-quality solar cells. Computer controls pulses of excimer laser and movement of silcon wafer. Mirrors direct laser beam to wafer. Lenses focus beam to small spot on surface. Process suitable for silicon made by dendritic-web-growth process.

Symptom frequency of children with cancer and parent quality of life in Turkey.

PubMed

Kudubes, Asli Akdeniz; Bektas, Murat; Ugur, Ozlem

2014-01-01

This research was planned with the aim of determining the effect of symptom frequency of children with cancer on the quality of life of their parents. In gathering the research data, the Child and Parent Information Form, the Symptom Evaluation Form and the Family Version of Life Quality Scale in Cancer Patients were used. Evaluation was made by using percentage calculations, Kruskal Wallis test, Bonferroni adjusted t-test and Bonferroni adjusted Mann-Whitney U test. The significance level was accepted as 0.005. Some 37.6% of the participant children were female and 62.4% were male, with an average age of 10.2 ± 4.5. While 41.0% were newly diagnosed, 46.2% were in remission and 12.8% was in relapse. Highly significant differences were detected according to the symptom frequency with parent physical and psychological health, social anxiety, and spiritual wellness sub-dimensions, as well as total point averages. It is thought that following up the symptoms that might develop depending on cancer diagnosis and treatment and implementing nursing initiatives aimed at reducing the symptoms, knowing the importance of life quality, maintaining measures aimed at life quality and planning initiatives to increase the life quality will play a key role in maintaining and developing the health of Turkish paediatric oncology patients and their parents.

Multi-EMR Structured Data Entry Form: User-Acceptance Testing of a Prototype.

PubMed

Zavar, Abbas; Keshavjee, Karim

2017-01-01

Capturing standardized data from multiple EMRs at the point of care is highly desirable for a variety of uses, including quality improvement programs, multi-centered clinical trials and clinical decision support. In this paper, we describe the design, development and user acceptance testing of a prototype web-based form (the Form) that can integrate with multiple EMRs. We used the validated UTAUT questionnaire to assess the likelihood of uptake of the Form into clinical practice. The Form was found to be easy to use, elicits low anxiety, supports productivity and is perceived to have good support. Users would benefit from training and from better social signaling about the importance of using the Form in their practice. Making the Form more fun and interesting could help increase uptake.

Solvent polarity effect on quality of n-octadecanethiol self-assembled monolayers on copper and oxidized copper

NASA Astrophysics Data System (ADS)

Zhang, Yaozhong; Zhou, Jun; Zhang, Xiaoli; Hu, Jun; Gao, Han

2014-11-01

This article reports the effect of solvent polarity on the formation of n-octadecanethiol self-assembled monolayers (C18SH-SAMs) on pure copper surface and oxidized copper surface. The quality of SAMs prepared in different solvents (n-hexane, toluene, trichloroethylene, chloroform, acetone, acetonitrile, ethanol) was monitored by EIS, RAIRS and XPS. The results indicated that C18SH-SAMs formed in these solvents were in good barrier properties on pure copper surface and the structures of monolayers formed in high polarity solvents were more compact and orderly than that formed in low polarity solvents. For comparison, C18SH adsorbed on the surface of oxidized copper in these solvents were studied and the results indicated that C18SH could be adsorbed on oxidized copper surface after the reduction of copper oxide layer by thiols. Compared with high polarity solvents, a limited reduction process of oxidized copper by thiols led to the incompletely formation of monolayers in low polarity solvents. This can be interpreted that the generated water on solid-liquid interface and a smaller reaction force restrict the continuous reduction reaction in low polarity solvents

[Prevalence and medical and social importance of disorders and diseases of the musculoskeletal systems in children and adolescents (review of literature)].

PubMed

Mirskaia, N B; Kolomenskaia, A N; Siniakina, A D

2015-01-01

The urgency of the problem of the excess incidence of disorders and diseases of the musculoskeletal system (MSS) in contemporary children and adolescents is determined by its high medical and social significance. However, the poor quality of diagnosis of MSS disorders in children at the polyclinics level, especially at the initial stages, when timely commenced recreational and corrective-measures are most effective, do not allow to carry out remedial work timely, and this in turn is the cause of the high prevalence of violations of the MSS later With the aim of the improvement of the quality of diagnosis of early forms of musculoskeletal pathology in children and adolescents, as well as for the performance of the prevention during learning them in school there is developed an information system for health care workers "Identification, correction and prevention of disorders of the locomotor apparatus in students of educational institutions". The core of the system is formed by developed by authors a classification of functional disorders and initial forms of diseases of the MSS in students, as well as the organization of this work.

An Evaluation of FrancoForme: A CASE-MANAGED HOME-BASED PRIMARY AND SECONDARY CARDIOVASCULAR DISEASE PREVENTION PROGRAM FOR FRENCH-SPEAKING CANADIANS.

PubMed

Prince, Stephanie A; Laflamme, Marc; Harris, Jennifer; Tulloch, Heather E; de Margerie, Michele

2017-11-01

Cardiovascular disease (CVD) is the leading cause of mortality globally. Telephone-delivered interventions targeting cardiovascular risk factors are gaining popularity. This study is an evaluation of FrancoForme, a cardiovascular risk factor reduction program for the primary and secondary prevention of CVD among French-speaking patients of Eastern Ontario. This study reports on changes in cardiovascular risk factors, weekly exercise levels, and psychosocial characteristics including anxiety, depression, and quality of life upon program completion (3 months) and at 1 year after the start of the program. Repeated-measures analysis of variance was used to compare changes in outcomes between primary prevention risk groups (low, moderate, and high risk for CVD) and the secondary prevention group (ie, cardiac rehabilitation) at baseline, 3 months and 12 months. A total of 762 patients enrolled in FrancoForme between 2008 and 2015. At 3 months, all program completers (n = 507) experienced significant reductions for all cardiovascular risk factors except diastolic blood pressure. Minutes of self-reported exercise increased significantly by an average 90 minutes per week and all psychosocial variables improved. Significant group effects were observed across several risk factors. Among 12-month responders (n = 240), exercise, high-density lipoproteins, triglycerides, cholesterol, and all psychosocial variables were improved over baseline results. FrancoForme is unique in targeting both the primary and secondary prevention of CVD and removes several of the barriers to participating in a conventional CVD prevention program for French-speaking patients. FrancoForme is successful, receiving high satisfaction rates and resulting in significant improvements in cardiovascular risk factors, exercise, anxiety, and depression, as well as quality of life.

Influence of the coating process on the tribological conditions during cold forging with a MoS2 based lubricant

NASA Astrophysics Data System (ADS)

Lorenz, Robby; Hagenah, Hinnerk; Merklein, Marion

2018-05-01

Cold forging processes such as forward rod extrusion can be used to produce high quality components like connection rods, shafts and gears. The main advantages of these extruded components are sufficient surface quality, work hardening, compressive residual stresses and fatigue strength. Since one technical disadvantage of extruded components lies in the achievable tolerance classes, the improvement of these should be of crucial importance. For instance, the attainable workpiece accuracy and component quality can be influenced by adapting the tribological system in such a way that the resulting friction is specifically controlled in order to improve component forming. Lubricant modification is one practical way of adapting the tribological system to the requirements of the forming process. An industrial established and highly efficient lubricant system is the application of a zinc-phosphate conversion layer with a molybdenum disulfide-based lubricant. While offering many advantages, its tribological conditions seem to depend strongly on the layer weight and the application strategy. These parameters and the respective interdependencies have not been sufficiently investigated yet. In order to examine this, the tribological conditions depending on the layer weight are analyzed in greater detail using the Ring-Compression-Test (RCT). This tribometer provides a comparative representation of the forming conditions during cold forging. Furthermore, a potential dependency between the tribological conditions and two different coating techniques is analyzed. The latter are represented by the industrial standards dipping and dip-drumming.

High temperature superconductor step-edge Josephson junctions using Ti-Ca-Ba-Cu-O

DOEpatents

Ginley, D.S.; Hietala, V.M.; Hohenwarter, G.K.G.; Martens, J.S.; Plut, T.A.; Tigges, C.P.; Vawter, G.A.; Zipperian, T.E.

1994-10-25

A process is disclosed for formulating non-hysteretic and hysteretic Josephson junctions using HTS materials which results in junctions having the ability to operate at high temperatures while maintaining high uniformity and quality. The non-hysteretic Josephson junction is formed by step-etching a LaAlO[sub 3] crystal substrate and then depositing a thin film of TlCaBaCuO on the substrate, covering the step, and forming a grain boundary at the step and a subsequent Josephson junction. Once the non-hysteretic junction is formed the next step to form the hysteretic Josephson junction is to add capacitance to the system. In the current embodiment, this is accomplished by adding a thin dielectric layer, LaA1O[sub 3], followed by a cap layer of a normal metal where the cap layer is formed by first depositing a thin layer of titanium (Ti) followed by a layer of gold (Au). The dielectric layer and the normal metal cap are patterned to the desired geometry. 8 figs.

Comparison of Different Forms of Exercise Training in Patients With Cardiac Disease: Where Does High-Intensity Interval Training Fit?

PubMed

Gayda, Mathieu; Ribeiro, Paula A B; Juneau, Martin; Nigam, Anil

2016-04-01

In this review, we discuss the most recent forms of exercise training available to patients with cardiac disease and their comparison or their combination (or both) during short- and long-term (phase II and III) cardiac rehabilitation programs. Exercise training modalities to be discussed include inspiratory muscle training (IMT), resistance training (RT), continuous aerobic exercise training (CAET), and high-intensity interval training (HIIT). Particular emphasis is placed on HIIT compared or combined (or both) with other forms such as CAET or RT. For example, IMT combined with CAET was shown to be superior to CAET alone for improving functional capacity, ventilatory function, and quality of life in patients with chronic heart failure. Similarly, RT combined with CAET was shown to optimize benefits with respect to functional capacity, muscle function, and quality of life. Furthermore, in recent years, HIIT has emerged as an alternative or complementary (or both) exercise modality to CAET, providing equivalent if not superior benefits to conventional continuous aerobic training with respect to aerobic fitness, cardiovascular function, quality of life, efficiency, safety, tolerance, and exercise adherence in both short- and long-term training studies. Finally, short-interval HIIT was shown to be useful in the initiation and improvement phases of cardiac rehabilitation, whereas moderate- or longer-interval (or both) HIIT protocols appear to be more appropriate for the improvement and maintenance phases because of their high physiological stimulus. We now propose progressive models of exercise training (phases II-III) for patients with cardiac disease, including a more appropriate application of HIIT based on the scientific literature in the context of a multimodal cardiac rehabilitation program. Copyright © 2016 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.

Attractive "quiet" courtyards: a potential modifier of urban residents' responses to road traffic noise?

PubMed

Gidlöf-Gunnarsson, Anita; Ohrström, Evy

2010-09-01

The present paper explores the influence of the physical environmental qualities of "quiet". courtyards (degree of naturalness and utilization) on residents' noise responses. A questionnaire study was conducted in urban residential areas with road-traffic noise exposure between L(Aeq,24h) 58 to 68 dB at the most exposed façade. The dwellings had "quiet" indoor section/s and faced a "quiet" outdoor courtyard (L(Aeq,24h) < 48 dB façade reflex included). Data were collected from 385 residents and four groups were formed based on sound-level categories (58-62 and 63-68 dB) and classification of the "quiet" courtyards into groups with low and high physical environmental quality. At both sound-level categories, the results indicate that access to high-quality "quiet" courtyards is associated with less noise annoyance and noise-disturbed outdoor activities among the residents. Compared to low-quality "quiet" courtyards, high-quality courtyards can function as an attractive restorative environment providing residents with a positive soundscape, opportunities for rest, relaxation and play as well as social relations that potentially reduce the adverse effects of noise. However, access to quietness and a high-quality courtyard can only compensate partly for high sound levels at façades facing the streets, thus, 16% and 29% were still noise annoyed at 58-62 and 63-68 dB, respectively. Implications of the "quiet"-side concept are discussed.

Attractive “Quiet” Courtyards: A Potential Modifier of Urban Residents’ Responses to Road Traffic Noise?

PubMed Central

Gidlöf-Gunnarsson, Anita; Öhrström, Evy

2010-01-01

The present paper explores the influence of the physical environmental qualities of “quiet”. courtyards (degree of naturalness and utilization) on residents’ noise responses. A questionnaire study was conducted in urban residential areas with road-traffic noise exposure between LAeq,24h 58 to 68 dB at the most exposed façade. The dwellings had “quiet” indoor section/s and faced a “quiet” outdoor courtyard (LAeq,24h < 48 dB façade reflex included). Data were collected from 385 residents and four groups were formed based on sound-level categories (58–62 and 63–68 dB) and classification of the “quiet” courtyards into groups with low and high physical environmental quality. At both sound-level categories, the results indicate that access to high-quality “quiet” courtyards is associated with less noise annoyance and noise-disturbed outdoor activities among the residents. Compared to low-quality “quiet” courtyards, high-quality courtyards can function as an attractive restorative environment providing residents with a positive soundscape, opportunities for rest, relaxation and play as well as social relations that potentially reduce the adverse effects of noise. However, access to quietness and a high-quality courtyard can only compensate partly for high sound levels at façades facing the streets, thus, 16% and 29% were still noise annoyed at 58–62 and 63–68 dB, respectively. Implications of the “quiet”-side concept are discussed. PMID:20948929

Magnetic field extraction of trap-based electron beams using a high-permeability grid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurst, N. C.; Danielson, J. R.; Surko, C. M., E-mail: csurko@physics.ucsd.edu

2015-07-15

A method to form high quality electrostatically guided lepton beams is explored. Test electron beams are extracted from tailored plasmas confined in a Penning-Malmberg trap. The particles are then extracted from the confining axial magnetic field by passing them through a high magnetic permeability grid with radial tines (a so-called “magnetic spider”). An Einzel lens is used to focus and analyze the beam properties. Numerical simulations are used to model non-adiabatic effects due to the spider, and the predictions are compared with the experimental results. Improvements in beam quality are discussed relative to the use of a hole in amore » high permeability shield (i.e., in lieu of the spider), and areas for further improvement are described.« less

Exploring Quality Assurance in Sixth Form Colleges

ERIC Educational Resources Information Center

Stoten, David William

2012-01-01

Purpose: This paper aims to focus on the changing nature of quality assurance systems within the sixth form college sector. Design/methodology/approach: Ten sixth form colleges were surveyed across England and staff from varying levels within college hierarchies questioned about how quality assurance systems were implemented. Research involved…

Effect of home care service on the quality of life in patients with gynecological cancer.

PubMed

Aktas, Demet; Terzioglu, Fusun

2015-01-01

The purpose of the research was to determine the effect of home care service on the quality of life in patients with gynecological cancer. This randomized case control study was carried out in a womans hospital between September 2011 and February 2012. Women undergoing gynecological cancer treatment were separated into intervention and control groups, of 35 patients each. The intervention group was provided with nursing care service through hospital and home visits (1st, 12th weeks) within the framework of a specifically developed nursing care plan. The control group was monitored without any intervention through the hospital routine protocols (1st, 12th weeks). Data were collected using An Interview Form, Home Visit Monitoring Form and Quality of Life Scale/Cancer Survivors. Effects of home care service on the quality of life in gynecological cancer patients were investigated using chi-square tests, McNemar's test, independent t-test and ANOVA. This study found that the intervention group receiving home care service had a moderately high quality of life (average mean: 6.01±0.64), while the control group had comparatively lower quality (average mean: 4.35±0.79) within the 12 week post- discharge period (p<0.05). This study found home care services to be efficient in improving the quality of life in patients with gynecological cancer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Rui; Parker, Matthew; Seshadri, Rekha

Bradyrhizobiumsp. Tv2a.2 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen-fixing root nodule of Tachigali versicolor collected in Barro Colorado Island of Panama. Here we describe the features of Bradyrhizobiumsp. Tv2a.2, together with high-quality permanent draft genome sequence information and annotation. The 8,496,279 bp high-quality draft genome is arranged in 87 scaffolds of 87 contigs, contains 8,109 protein-coding genes and 72 RNA-only encoding genes. In conclusion, this rhizobial genome was sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

British Thoracic Society quality standards for home oxygen use in adults

PubMed Central

Suntharalingam, Jay; Wilkinson, Tom; Annandale, Joseph; Davey, Claire; Fielding, Rhea; Freeman, Daryl; Gibbons, Michael; Hardinge, Maxine; Hippolyte, Sabrine; Knowles, Vikki; Lee, Cassandra; MacNee, William; Pollington, Jacqueline; Vora, Vandana; Watts, Trefor; Wijesinghe, Meme

2017-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for home oxygen provision in the UK, together with measurable markers of good practice. Quality statements are based on the British Thoracic Society (BTS) Guideline for Home Oxygen Use in Adults. Methods Development of BTS Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 10 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for home oxygen use, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for home oxygen use in adults form a key part of the range of supporting materials that the society produces to assist in the dissemination and implementation of a guideline’s recommendations. PMID:29018527

Simulation on turning aspheric surface method via oscillating feed

NASA Astrophysics Data System (ADS)

Kong, Fanxing; Li, Zengqiang; Sun, Tao

2014-08-01

It is quite difficult to manufacturing optical components, the combination of high gradient ellipsoid and hyperboloid, with high machining surface requirements. To solve the problem, in this paper we present a turning and forming method via oscillating feed of R-θ layout lathe, analyze machining ellipsoid segment and hyperboloid segment separately through oscillating feed. Also calculate parameters on each trajectory during processing respectively and obtain displacement, velocity, acceleration and other parameters. The simulation result shows that this rotary turning method is capable of ensuring that the cutter is on the equidistance line of meridian cross section curve of work piece during processing high gradient aspheric surface, which helps getting high quality surface. Also the method provides a new approach and a theory basis for manufacturing high quality aspheric surface and extending function of the available twin-spindle lathe as well.

[Influence of stress factors and socio-demographic characteristics on the sleep quality of nursing students].

PubMed

Benavente, Sonia Betzabeth Ticona; Silva, Rodrigo Marques da; Higashi, Aline Baraldi; Guido, Laura de Azevedo; Costa, Ana Lucia Siqueira

2014-06-01

To analyze the influence of stress factors and socio-demographic characteristics on the sleep quality of nursing students. An analytical cross-sectional and quantitative study, conducted with 151 nursing students in São Paulo between March and April of 2012. A form for socio-demographic characteristics, the Instrument to Evaluate Stress in Nursing Students and the Pittsburgh Sleep Index were applied. High levels of stress was predominant for Time Management (27.8%) and Professional Training (30.5%) and low sleep quality (78.8%). The Professional Communication, Professional Training and Theoretical Activity are positively correlated to sleep quality. Work activity, academic year and time for daily studies contributed to a low quality of sleep. Few stress factors from the academic environment and some socio-demographic characteristics contributed to the reduction of sleep quality in students.

High angle of attack flying qualities criteria for longitudinal rate command systems

NASA Technical Reports Server (NTRS)

Wilson, David J.; Citurs, Kevin D.; Davidson, John B.

1994-01-01

This study was designed to investigate flying qualities requirements of alternate pitch command systems for fighter aircraft at high angle of attack. Flying qualities design guidelines have already been developed for angle of attack command systems at 30, 45, and 60 degrees angle of attack, so this research fills a similar need for rate command systems. Flying qualities tasks that require post-stall maneuvering were tested during piloted simulations in the McDonnell Douglas Aerospace Manned Air Combat Simulation facility. A generic fighter aircraft model was used to test angle of attack rate and pitch rate command systems for longitudinal gross acquisition and tracking tasks at high angle of attack. A wide range of longitudinal dynamic variations were tested at 30, 45, and 60 degrees angle of attack. Pilot comments, Cooper-Harper ratings, and pilot induced oscillation ratings were taken from five pilots from NASA, USN, CAF, and McDonnell Douglas Aerospace. This data was used to form longitudinal design guidelines for rate command systems at high angle of attack. These criteria provide control law design guidance for fighter aircraft at high angle of attack, low speed flight conditions. Additional time history analyses were conducted using the longitudinal gross acquisition data to look at potential agility measures of merit and correlate agility usage to flying qualities boundaries. This paper presents an overview of this research.

[The Brazilian Hospital Information System and the acute myocardial infarction hospital care].

PubMed

Escosteguy, Claudia Caminha; Portela, Margareth Crisóstomo; Medronho, Roberto de Andrade; de Vasconcellos, Maurício Teixeira Leite

2002-08-01

To analyze the applicability of the Brazilian Unified Health System's national hospital database to evaluate the quality of acute myocardial infarction hospital care. It was evaluated 1,936 hospital admission forms having acute myocardial infarction (AMI) as primary diagnosis in the municipal district of Rio de Janeiro, Brazil, in 1997. Data was collected from the national hospital database. A stratified random sampling of 391 medical records was also evaluated. AMI diagnosis agreement followed the literature criteria. Variable accuracy analysis was performed using kappa index agreement. The quality of AMI diagnosis registered in hospital admission forms was satisfactory according to the gold standard of the literature. In general, the accuracy of the variables demographics (sex, age group), process (medical procedures and interventions), and outcome (hospital death) was satisfactory. The accuracy of demographics and outcome variables was higher than the one of process variables. Under registration of secondary diagnosis was high in the forms and it was the main limiting factor. Given the study findings and the widespread availability of the national hospital database, it is pertinent its use as an instrument in the evaluation of the quality of AMI medical care.

Evaluating the feasibility of using online software to collect patient information in a chiropractic practice-based research network.

PubMed

Kania-Richmond, Ania; Weeks, Laura; Scholten, Jeffrey; Reney, Mikaël

2016-03-01

Practice based research networks (PBRNs) are increasingly used as a tool for evidence based practice. We developed and tested the feasibility of using software to enable online collection of patient data within a chiropractic PBRN to support clinical decision making and research in participating clinics. To assess the feasibility of using online software to collect quality patient information. The study consisted of two phases: 1) Assessment of the quality of information provided, using a standardized form; and 2) Exploration of patients' perspectives and experiences regarding online information provision through semi-structured interviews. Data analysis was descriptive. Forty-five new patients were recruited. Thirty-six completed online forms, which were submitted by an appropriate person 100% of the time, with an error rate of less than 1%, and submitted in a timely manner 83% of the time. Twenty-one participants were interviewed. Overall, online forms were preferred given perceived security, ease of use, and enabling provision of more accurate information. Use of online software is feasible, provides high quality information, and is preferred by most participants. A pen-and-paper format should be available for patients with this preference and in case of technical difficulties.

Re-inventing clinical trials through TransCelerate.

PubMed

Gill, Dalvir

2014-11-01

TransCelerate BioPharma was formed in 2012 as a non-profit organization with a mission to collaborate across the biopharmaceutical research and development community to identify, prioritize, design and facilitate the implementation of solutions to drive efficient, effective and high-quality delivery of new medicines.

High-quality vertical light emitting diodes fabrication by mechanical lift-off technique

NASA Astrophysics Data System (ADS)

Tu, Po-Min; Hsu, Shih-Chieh; Chang, Chun-Yen

2011-10-01

We report the fabrication of mechanical lift-off high quality thin GaN with Hexagonal Inversed Pyramid (HIP) structures for vertical light emitting diodes (V-LEDs). The HIP structures were formed at the GaN/sapphire substrate interface under high temperature during KOH wet etching process. The average threading dislocation density (TDD) was estimated by transmission electron microscopy (TEM) and found the reduction from 2×109 to 1×108 cm-2. Raman spectroscopy analysis revealed that the compressive stress of GaN epilayer was effectively relieved in the thin-GaN LED with HIP structures. Finally, the mechanical lift-off process is claimed to be successful by using the HIP structures as a sacrificial layer during wafer bonding process.

Exact Tuning of High-Q Optical Microresonators by Use of UV

NASA Technical Reports Server (NTRS)

Savchankov, Anaotliy; Maleki, Lute; Iltchenko, Vladimir; Handley, Timothy

2006-01-01

In one of several alternative approaches to the design and fabrication of a "whispering-gallery" optical microresonator of high resonance quality (high Q), the index of refraction of the resonator material and, hence, the resonance frequencies. In this approach, a microresonator structure is prepared by forming it from an ultraviolet-sensitive material. Then the structure is subjected to controlled exposure to UV light while its resonance frequencies are monitored.

Misfolded Polyglutamine, Polyalanine, and Superoxide Dismutase 1 Aggregate via Distinct Pathways in the Cell*

PubMed Central

Polling, Saskia; Mok, Yee-Foong; Ramdzan, Yasmin M.; Turner, Bradley J.; Yerbury, Justin J.; Hill, Andrew F.; Hatters, Danny M.

2014-01-01

Protein aggregation into intracellular inclusions is a key feature of many neurodegenerative disorders. A common theme has emerged that inappropriate self-aggregation of misfolded or mutant polypeptide sequences is detrimental to cell health. Yet protein quality control mechanisms may also deliberately cluster them together into distinct inclusion subtypes, including the insoluble protein deposit (IPOD) and the juxtanuclear quality control (JUNQ). Here we investigated how the intrinsic oligomeric state of three model systems of disease-relevant mutant protein and peptide sequences relates to the IPOD and JUNQ patterns of aggregation using sedimentation velocity analysis. Two of the models (polyalanine (37A) and superoxide dismutase 1 (SOD1) mutants A4V and G85R) accumulated into the same JUNQ-like inclusion whereas the other, polyglutamine (72Q), formed spatially distinct IPOD-like inclusions. Using flow cytometry pulse shape analysis (PulSA) to separate cells with inclusions from those without revealed the SOD1 mutants and 37A to have abruptly altered oligomeric states with respect to the nonaggregating forms, regardless of whether cells had inclusions or not, whereas 72Q was almost exclusively monomeric until inclusions formed. We propose that mutations leading to JUNQ inclusions induce a constitutively “misfolded” state exposing hydrophobic side chains that attract and ultimately overextend protein quality capacity, which leads to aggregation into JUNQ inclusions. Poly(Q) is not misfolded in this same sense due to universal polar side chains, but is highly prone to forming amyloid fibrils that we propose invoke a different engagement mechanism with quality control. PMID:24425868

Misfolded polyglutamine, polyalanine, and superoxide dismutase 1 aggregate via distinct pathways in the cell.

PubMed

Polling, Saskia; Mok, Yee-Foong; Ramdzan, Yasmin M; Turner, Bradley J; Yerbury, Justin J; Hill, Andrew F; Hatters, Danny M

2014-03-07

Protein aggregation into intracellular inclusions is a key feature of many neurodegenerative disorders. A common theme has emerged that inappropriate self-aggregation of misfolded or mutant polypeptide sequences is detrimental to cell health. Yet protein quality control mechanisms may also deliberately cluster them together into distinct inclusion subtypes, including the insoluble protein deposit (IPOD) and the juxtanuclear quality control (JUNQ). Here we investigated how the intrinsic oligomeric state of three model systems of disease-relevant mutant protein and peptide sequences relates to the IPOD and JUNQ patterns of aggregation using sedimentation velocity analysis. Two of the models (polyalanine (37A) and superoxide dismutase 1 (SOD1) mutants A4V and G85R) accumulated into the same JUNQ-like inclusion whereas the other, polyglutamine (72Q), formed spatially distinct IPOD-like inclusions. Using flow cytometry pulse shape analysis (PulSA) to separate cells with inclusions from those without revealed the SOD1 mutants and 37A to have abruptly altered oligomeric states with respect to the nonaggregating forms, regardless of whether cells had inclusions or not, whereas 72Q was almost exclusively monomeric until inclusions formed. We propose that mutations leading to JUNQ inclusions induce a constitutively "misfolded" state exposing hydrophobic side chains that attract and ultimately overextend protein quality capacity, which leads to aggregation into JUNQ inclusions. Poly(Q) is not misfolded in this same sense due to universal polar side chains, but is highly prone to forming amyloid fibrils that we propose invoke a different engagement mechanism with quality control.

Food and Drug Administration: Helping pharmacists ensure that patients receive high-quality medicines.

PubMed

Kremzner, Mary

2016-01-01

Ensuring that the drugs patients take are safe and effective is critical to the Food and Drug Administration (FDA) mission and a major reason for testing an active pharmaceutical ingredient or currently marketed drug product. To address gaps in the assessment of drug quality, FDA's Center for Drug Evaluation and Research (CDER) has created the Office of Pharmaceutical Quality (OPQ). This newly formed "super-office" within CDER launched a concerted new strategy that enhances the surveillance of drug manufacturing and will bring a comprehensive approach to quality oversight. With OPQ and these new performance measures in place, FDA can sharpen its focus on issues critical to quality and can identify and respond to manufacturing issues before they become major systemic problems. Published by Elsevier Inc.

Gaia: automated quality assessment of protein structure models.

PubMed

Kota, Pradeep; Ding, Feng; Ramachandran, Srinivas; Dokholyan, Nikolay V

2011-08-15

Increasing use of structural modeling for understanding structure-function relationships in proteins has led to the need to ensure that the protein models being used are of acceptable quality. Quality of a given protein structure can be assessed by comparing various intrinsic structural properties of the protein to those observed in high-resolution protein structures. In this study, we present tools to compare a given structure to high-resolution crystal structures. We assess packing by calculating the total void volume, the percentage of unsatisfied hydrogen bonds, the number of steric clashes and the scaling of the accessible surface area. We assess covalent geometry by determining bond lengths, angles, dihedrals and rotamers. The statistical parameters for the above measures, obtained from high-resolution crystal structures enable us to provide a quality-score that points to specific areas where a given protein structural model needs improvement. We provide these tools that appraise protein structures in the form of a web server Gaia (http://chiron.dokhlab.org). Gaia evaluates the packing and covalent geometry of a given protein structure and provides quantitative comparison of the given structure to high-resolution crystal structures. dokh@unc.edu Supplementary data are available at Bioinformatics online.

Observation of biexcitonic emission at extremely low power density in tungsten disulfide atomic layers grown on hexagonal boron nitride.

PubMed

Okada, Mitsuhiro; Miyauchi, Yuhei; Matsuda, Kazunari; Taniguchi, Takashi; Watanabe, Kenji; Shinohara, Hisanori; Kitaura, Ryo

2017-03-23

Monolayer transition metal dichalcogenides (TMDCs) including WS 2 , MoS 2 , WSe 2 and WS 2 , are two-dimensional semiconductors with direct bandgap, providing an excellent field for exploration of many-body effects in 2-dimensions (2D) through optical measurements. To fully explore the physics of TMDCs, the prerequisite is preparation of high-quality samples to observe their intrinsic properties. For this purpose, we have focused on high-quality samples, WS 2 grown by chemical vapor deposition method with hexagonal boron nitride as substrates. We observed sharp exciton emissions, whose linewidth is typically 22~23 meV, in photoluminescence spectra at room temperature, which result clearly demonstrates the high-quality of the current samples. We found that biexcitons formed with extremely low-excitation power (240 W/cm 2 ) at 80 K, and this should originate from the minimal amount of localization centers in the present high-quality samples. The results clearly demonstrate that the present samples can provide an excellent field, where one can observe various excitonic states, offering possibility of exploring optical physics in 2D and finding new condensates.

Flexible and stretchable electronics for biointegrated devices.

PubMed

Kim, Dae-Hyeong; Ghaffari, Roozbeh; Lu, Nanshu; Rogers, John A

2012-01-01

Advances in materials, mechanics, and manufacturing now allow construction of high-quality electronics and optoelectronics in forms that can readily integrate with the soft, curvilinear, and time-dynamic surfaces of the human body. The resulting capabilities create new opportunities for studying disease states, improving surgical procedures, monitoring health/wellness, establishing human-machine interfaces, and performing other functions. This review summarizes these technologies and illustrates their use in forms integrated with the brain, the heart, and the skin.

Quality evaluation of green tea leaf cultured under artificial light condition using gas chromatography/mass spectrometry.

PubMed

Miyauchi, Shunsuke; Yonetani, Tsutomu; Yuki, Takayuki; Tomio, Ayako; Bamba, Takeshi; Fukusaki, Eiichiro

2017-02-01

For an experimental model to elucidate the relationship between light quality during plant culture conditions and plant quality of crops or vegetables, we cultured tea plants (Camellia sinensis) and analyzed their leaves as tea material. First, metabolic profiling of teas from a tea contest in Japan was performed with gas chromatography/mass spectrometry (GC/MS), and then a ranking predictive model was made which predicted tea rankings from their metabolite profile. Additionally, the importance of some compounds (glutamine, glutamic acid, oxalic acid, epigallocatechin, phosphoric acid, and inositol) was elucidated for measurement of the quality of tea leaf. Subsequently, tea plants were cultured in artificial conditions to control these compounds. From the result of prediction by the ranking predictive model, the tea sample supplemented with ultraviolet-A (315-399 nm) showed the highest ranking. The improvement in quality was thought to come from the high amino-acid and decreased epigallocatechin content in tea leaves. The current study shows the use and value of metabolic profiling in the field of high-quality crops and vegetables production that has been conventionally evaluated by human sensory analysis. Metabolic profiling enables us to form hypothesis to understand and develop high quality plant cultured under artificial condition. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Ferromagnetic germanide in Ge nanowire transistors for spintronics application.

PubMed

Tang, Jianshi; Wang, Chiu-Yen; Hung, Min-Hsiu; Jiang, Xiaowei; Chang, Li-Te; He, Liang; Liu, Pei-Hsuan; Yang, Hong-Jie; Tuan, Hsing-Yu; Chen, Lih-Juann; Wang, Kang L

2012-06-26

To explore spintronics applications for Ge nanowire heterostructures formed by thermal annealing, it is critical to develop a ferromagnetic germanide with high Curie temperature and take advantage of the high-quality interface between Ge and the formed ferromagnetic germanide. In this work, we report, for the first time, the formation and characterization of Mn(5)Ge(3)/Ge/Mn(5)Ge(3) nanowire transistors, in which the room-temperature ferromagnetic germanide was found through the solid-state reaction between a single-crystalline Ge nanowire and Mn contact pads upon thermal annealing. The atomically clean interface between Mn(5)Ge(3) and Ge with a relatively small lattice mismatch of 10.6% indicates that Mn(5)Ge(3) is a high-quality ferromagnetic contact to Ge. Temperature-dependent I-V measurements on the Mn(5)Ge(3)/Ge/Mn(5)Ge(3) nanowire heterostructure reveal a Schottky barrier height of 0.25 eV for the Mn(5)Ge(3) contact to p-type Ge. The Ge nanowire field-effect transistors built on the Mn(5)Ge(3)/Ge/Mn(5)Ge(3) heterostructure exhibit a high-performance p-type behavior with a current on/off ratio close to 10(5), and a hole mobility of 150-200 cm(2)/(V s). Temperature-dependent resistance of a fully germanided Mn(5)Ge(3) nanowire shows a clear transition behavior near the Curie temperature of Mn(5)Ge(3) at about 300 K. Our findings of the high-quality room-temperature ferromagnetic Mn(5)Ge(3) contact represent a promising step toward electrical spin injection into Ge nanowires and thus the realization of high-efficiency spintronic devices for room-temperature applications.

Electroforming of optical tooling in high-strength Ni-Co alloy

NASA Astrophysics Data System (ADS)

Stein, Berl

2003-05-01

Plastic optics are often mass produced by injection, compression or injection-compression molding. Optical quality molds can be directly machined in appropriate materials (tool steels, electroless nickel, aluminum, etc.), but much greater cost efficiency can be achieved with electroformed modl inserts. Traditionally, electroforming of optical quality mold inserts has been carried out in nickel, a material much softer than tool steels which, when hardened to 45 - 50 HRc usually exhibit high wear resistance and long service life (hundreds of thousands of impressions per mold). Because of their low hardness (< 20 HRc), nickel molds can produce only tens of thousands of parts before they are scrapped due to wear or accidental damage. This drawback prevented their wider usage in general plastic and optical mold making. Recently, NiCoForm has developed a proprietary Ni-CO electroforming bath combining the high strength and wear resistance of the alloy with the low stress and high replication fidelity typical of pure nickel electroforming. This paper will outline the approach to electroforming of optical quality tooling in low stress, high strength Ni-Co alloy and present several examples of electroformed NiColoy mold inserts.

Laser-assisted micro sheet forming

NASA Astrophysics Data System (ADS)

Holtkamp, Jens; Gillner, Arnold

2008-01-01

The fast growing market for micro technical products requires parts with increasing complexity. While sheet metal forming enables low cost mass production with short cycle times, it is limited by the maximum degree of deformation and the quality of the cut edge. The technology of warm forming partially eliminates these deficiencies. This operation takes place at elevated temperatures before structural transformation is initiated. It combines characteristic advantages of traditional cold and hot forming processes. Lasers as heat sources provide a high, selective and controllable energy input. The general difficulty of a uniform temperature distribution during the heating process can be reached by using an Axicon which generates an annulus on the sheet metal surface. The temperature of the workpiece, measured by a pyrometer, is tuned by a PI-Controller. A tool incorporating a multistage operation die is used for the manufacturing of up to three parts at the same time. The tool is integrated into a hydraulical press. A gearwheel made of the magnesium alloy AZ31 is chosen as metal demonstrator. The quality of these punched parts could be significantly improved at elevated temperatures

77 FR 13337 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-06

... ``Part B'' of the QualityNet Identity Management System Account Form (CMS-10267; OCN: 0938-1050). Once the ESRD System Access Form is approved, the QualityNet Identity Management System (QIMS) Account Form... the ESRD systems through the creation of user IDs and passwords within the QualityNet Identity...

Operative blood transfusion quality improvement audit.

PubMed

Al Sohaibani, Mazen; Al Malki, Assaf; Pogaku, Venumadhav; Al Dossary, Saad; Al Bernawi, Hanan

2014-01-01

To determine how current anesthesia team handless the identification of surgical anaesthetized patient (right patient). And the check of blood unit before collecting and immediately before blood administration (right blood) in operating rooms where nurses have minimal duties and responsibility to handle blood for transfusion in anaesthetized patients. To elicit the degree of anesthesia staff compliance with new policies and procedures for anaesthetized surgical patient the blood transfusion administration. A large tertiary care reference and teaching hospital. A prospective quality improvement. Elaboration on steps for administration of transfusion from policies and procedures to anaesthetized patients; and analysis of the audit forms for conducted transfusions. An audit form was used to get key performance indicators (KPIs) observed in all procedures involve blood transfusion and was ticked as item was met, partially met, not met or not applicable. Descriptive statistics as number and percentage Microsoft excel 2003. Central quality improvement committee presented the results in number percentage and graphs. The degree of compliance in performing the phases of blood transfusion by anesthesia staff reached high percentage which let us feel certain that the quality is assured that the internal policy and procedures (IPP) are followed in the great majority of all types of red cells and other blood products transfusion from the start of requesting the blood or blood product to the prescript of checking the patient in the immediate post-transfusion period. Specific problem area of giving blood transfusion to anaesthetized patient was checking KPI concerning the phases of blood transfusion was audited and assured the investigators of high quality performance in procedures of transfusion.

British Thoracic Society quality standards for the investigation and management of pulmonary nodules.

PubMed

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations.

British Thoracic Society quality standards for the investigation and management of pulmonary nodules

PubMed Central

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations. PMID:29682290

High School Students' Written Argumentation Qualities with Problem-Based Computer-Aided Material (PBCAM) Designed about Human Endocrine System

ERIC Educational Resources Information Center

Vekli, Gülsah Sezen; Çimer, Atilla

2017-01-01

This study investigated development of students' scientific argumentation levels in the applications made with Problem-Based Computer-Aided Material (PBCAM) designed about Human Endocrine System. The case study method was used: The study group was formed of 43 students in the 11th grade of the science high school in Rize. Human Endocrine System…

Air Quality Management Using Pollution Prevention: A Joint Service Approach

DTIC Science & Technology

1998-03-01

sites to promote polymerization. High solids coatings may be one or two component systems based on acrylic , alkyd , epoxy, polyester, or urethane...formulation to form high molecular weight polymers. Examples include acrylic , epoxy/polyester hybrid , functional epoxy, thin film epoxy, and urethane...Air Human System Center (HSC/OEBQ) Naval Facilities Engineering Service Center (NFESC) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 9

Quality of Physician Orders for Life-Sustaining Treatment Forms Completed in Nursing Homes

PubMed Central

Bressette, Matthew; Enguidanos, Susan

2017-01-01

Abstract Background: The physician orders for life-sustaining treatment (POLST) form allows seriously ill individuals to express their preferences for end-of-life treatments. Despite increased POLST use, little is known about the quality of completed forms. Objective: We examined the quality of POLST forms prepared for nursing home residents, including whether they had required signatures and clinically consistent care preferences. Design: We conducted a chart review of POLST forms for a sample of nursing home residents in California. Setting/Sample: We completed POLST audits for 938 residents in 13 nursing homes in Los Angeles. Measures: We recorded whether POLST forms were signed by both the patient (or proxy) and the physician, and whether the patient's treatment choices regarding resuscitation and medical intervention were consistent, as required by the California form. Results: Overall, 69.6% of audited POLST forms had at least one indicator of poor quality. Most lacked a required signature (15.8% lacked a physician signature and 17.4% lacked a patient/proxy signature) and 5.6% had conflicting treatment preferences. Conclusion: We found 30.4% of POLST forms for nursing home residents were not complete or documented clinically contradictory treatment preferences. Improvement in the quality of POLST forms is needed. PMID:27841953

[New methods for the evaluation of bone quality. Bone anabolic agents and bone quality.

PubMed

Yamamoto, Norio; Tsuchiya, Hiroyuki

Teriparatide(TPTD)products that can be used clinically in Japan include a daily subcutaneous injection form produced by genetic engineering and a weekly subcutaneous injectable TPTD acetate form produced by chemical synthesis. Published reports indicate that both forms exhibit excellent antifracture efficacy, and as the only anabolic agents that promote osteogenesis, TPTD products now occupy a prominent position. However, the two forms differ considerably, not only in frequency of administration, but also in mechanism of action. The daily form stimulates osteogenesis and accompanying resorption through more radical high bone turnover, and early in the course of treatment, intracortical porosity and apatite crystallization decrease, while immature collagen crosslinking increases. However, because daily formulations also produce an increase in cortical surface area or cortical thickness, the effects are counterbalanced, and bone strength is maintained. In contrast, the weekly form prioritizes osteogenesis, and by concurrently lowering turnover below pretreatment levels, improves trabecular bone mass and structure, and enhances strength without leading to cortical porosity and other undesirable phenomena. Abaloparatide, a PTHrP(1-34)analog that is homologous with the biologically active site of PTH drugs, is currently under development, and we eagerly anticipate further clarification of the mechanism of action of each formulation on bone.

Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

NASA Astrophysics Data System (ADS)

Liu, Shichen; Lang, Lihui; Sherkatghanad, Ehsan; Wang, Yao; Xu, Wencai

2018-04-01

Glass-reinforced aluminum laminate (GLARE) is a new class of fiber metal laminates (FMLs) which has the advantages such as high tensile strength, outstanding fatigue, impact resistance, and excellent corrosion properties. GLARE has been extensively applied in advanced aerospace and automobile industries. However, the deformation behavior of the glass fiber during forming must be studied to the benefits of the good-quality part we form. In this research, we focus on the effect of fiber layer orientation on the GLARE laminate formability in stamp forming process. Experimental and numerical analysis of stamping a hemisphere part in different fiber orientation is investigated. The results indicate that unidirectional and multi-directional fiber in the middle layer make a significant effect on the thinning and also surface forming quality of the three layer sheet. Furthermore, the stress-strain distribution of the aluminum alloy and the unique anisotropic property of the fiber layer exhibit that fiber layer orientation can also affect the forming depths as well as the fracture modes of the laminate. According to the obtained results, it is revealed that multi-directional fiber layers are a good alternative compared to the unidirectional fibers especially when a better formability is the purpose.

Improving consistency and quality of service delivery: implications for the addiction treatment field.

PubMed

Knott, Anne Marie; Corredoira, Rafael; Kimberly, John

2008-09-01

Addiction treatment providers face serious problems in delivering consistent, high-quality services over time. Among those providers with multiple treatment sites, there is also intersite variability. This is a serious problem in the addiction field, likely to be made worse as new technologies are introduced and/or as there is industry consolidation (Corredoira, R., Kimberly, J. (2006) Industry evolution through consolidation: Implications for addiction treatment. Journal of Substance Abuse Treatment 31, 255-265.). Although serious, these problems in managing and monitoring to assure consistent service quality have been faced by many other industries. Here, we review evidence from research in other industries regarding three different forms of management (vertical integration, franchising, and licensing) across a chain of individual service providers. We show how each management form affects the level, consistency, and improvement of service delivery over time. In addition, we discuss how such performance advantages affect customer demand as well as regulatory endorsement of the consolidated firm and its approach.

Improving yield and performance in ZnO thin-film transistors made using selective area deposition.

PubMed

Nelson, Shelby F; Ellinger, Carolyn R; Levy, David H

2015-02-04

We describe improvements in both yield and performance for thin-film transistors (TFTs) fabricated by spatial atomic layer deposition (SALD). These improvements are shown to be critical in forming high-quality devices using selective area deposition (SAD) as the patterning method. Selective area deposition occurs when the precursors for the deposition are prevented from reacting with some areas of the substrate surface. Controlling individual layer quality and the interfaces between layers is essential for obtaining good-quality thin-film transistors and capacitors. The integrity of the gate insulator layer is particularly critical, and we describe a method for forming a multilayer dielectric using an oxygen plasma treatment between layers that improves crossover yield. We also describe a method to achieve improved mobility at the important interface between the semiconductor and the gate insulator by, conversely, avoiding oxygen plasma treatment. Integration of the best designs results in wide design flexibility, transistors with mobility above 15 cm(2)/(V s), and good yield of circuits.

Improved perovskite morphology and crystallinity using porous PbI2 layers for efficient planar heterojunction solar cells

NASA Astrophysics Data System (ADS)

Jia, Xianyu; Hu, Ziyang; Xu, Jie; Huang, Like; Zhang, Jing; Zhang, Jianjun; Zhu, Yuejin

2017-12-01

We demonstrate the flexible and facile use of porous PbI2 layers to fabricate high quality perovskite films with a dense surface and without residual PbI2. PbI2 precursor solutions by adding polystyrene pore-forming agents are first spin-coated to fabricate the wet film. A porous PbI2 layer is formed by washing off polystyrene using organic solvents. The porous PbI2 layer not only serves as a channel for transporting the CH3NH3I solution but also offers extremely enlarged contact areas, facilitating interfacial reaction with CH3NH3I. Shiny smooth perovskite films with excellent electronic quality and solar cells with an efficiency up to 17% are obtained.

Simple numerical method for predicting steady compressible flows

NASA Technical Reports Server (NTRS)

Vonlavante, Ernst; Nelson, N. Duane

1986-01-01

A numerical method for solving the isenthalpic form of the governing equations for compressible viscous and inviscid flows was developed. The method was based on the concept of flux vector splitting in its implicit form. The method was tested on several demanding inviscid and viscous configurations. Two different forms of the implicit operator were investigated. The time marching to steady state was accelerated by the implementation of the multigrid procedure. Its various forms very effectively increased the rate of convergence of the present scheme. High quality steady state results were obtained in most of the test cases; these required only short computational times due to the relative efficiency of the basic method.

Comprehensive Performance Study of Magneto Cantilevers as a Candidate Model for Biological Sensors used in Lab-on-a-Chip Applications

PubMed Central

Saberkari, Hamidreza; Ghavifekr, Habib Badri; Shamsi, Mousa

2015-01-01

In recent years, demand for biological sensors which are capable of fast and accurate detection of minor amounts of pathogens in real-time form has been intensified. Acoustic wave (AW) devices whose performance is determined by mass sensitivity parameters and quality factor are used in biological sensors as platforms with high quality. Yet, current AW devices are facing many challenges such as the low value of their quality factor in practical applications and also their difficulty to use in liquids. The main focus of this article is to study on the magnetostrictive sensors which include milli/microcantilever (MSMC) type. In comparison with AW devices, MSMC has a lot of advantages; (1) its actuation and sensing unit is wirelessly controlled. (2) Its fabrication process is easy. (3) It works well in liquids. (4) It has a high-quality factor (in the air > 500). Simulation results demonstrate that the amount of quality factor depends on environment properties (density and viscosity), MSMC geometry, and its resonant behavior of harmonic modes. PMID:26120566

Optimized Enhanced Bioremediation Through 4D Geophysical Monitoring and Autonomous Data Collection, Processing and Analysis

DTIC Science & Technology

2014-09-01

High Fructose Corn Syrup Diluted 1 to 10 percent by weight 50 to 500 mg/l Slow Release Whey (fresh/powered) Dissolved (powdered form) or injected...the assessment of remedial progress and functioning. This project also addressed several high priority needs from the Navy Environmental Quality...memory high -performance computing systems. For instance, as of March 2012 the code has been successfully executed on 2 cpu’s for an inversion problem

Neogene and Quaternary foraminifera and paleoenvironments of a corehole from Horn Island, Mississippi

USGS Publications Warehouse

Gibson, Thomas G.

1994-01-01

The only semipermanent surface water available on the Southern High Plains plateau of Texas and New Mexico is contained in saline lakes and in the playa lakes that form in shallow depressions, called playa basins, following heavy rainfall. The playas generally are accepted as the main source of recharge to the underlying High Plains (Ogallala) aquifer of the region, and they constitute the major wildlife habitat on the Southern High Plains. Their use as water sources, holding ponds, and waste-disposal sites by agricultural and industrial operations may potentially lead to ground-water contamination and habitat degradation. Therefore, playa lakes will play an essential role in the collection of surface-water quality and ecological data for the Southern High Plains study unit of the National Water-Quality Assessment program of the U.S. Geological Survey.

The application of exergy to human-designed systems

NASA Astrophysics Data System (ADS)

Hamilton, P.

2012-12-01

Exergy is the portion of the total energy of a system that is available for conversion to useful work. Exergy takes into account both the quantity and quality of energy. Heat is the inevitable product of using any form of high-quality energy such as electricity. Modern commercial buildings and industrial facilities use large amounts of electricity and so produce huge amounts of heat. This heat energy typically is treated as a waste product and discharged to the environment and then high-quality energy sources are consumed to satisfy low-quality energy heating and cooling needs. Tens of thousands of buildings and even whole communities could meet much of their heating and cooling needs through the capture and reuse of heat energy. Yet the application of exergy principles often faces resistance because it challenges conventions about how we design, construct and operate human-engineered systems. This session will review several exergy case studies and conclude with an audience discussion of how exergy principles may be both applied and highlighted in formal and informal education settings.

The Influence of Social Structure on Cancer Pain and Quality of Life.

PubMed

Ham, Ok-Kyung; Chee, Wonshik; Im, Eun-Ok

2017-12-01

The aim of this study was to investigate whether social structure is associated with cancer pain and quality of life using the Social Structure and Personality Research Framework. This study was a secondary analysis of data from 480 cancer patients. The measurements included socioeconomic variables, self-reported cancer pain using the McGill Pain Questionnaire-Short Form (MPQ-SF), and quality of life measured using the Functional Assessment of Cancer Therapy Scale (FACT-G). The data were analyzed using moderated multiple regression. Cancer pain and quality of life differed significantly with income. The associations between income and pain and quality of life were significant only for the high education group (≥ partial college), and these associations were greater for Caucasians than for their counterparts ( p < .05). When developing interventions, nurses should consider the influence of socioeconomic variables on pain and quality of life while considering possible moderating factors such as education.

Developing the Scale for Quality of Life in Pediatric Oncology Patients Aged 13-18: Adolescent Form and Parent Form.

PubMed

Bektas, Murat; Akdeniz Kudubes, Aslı; Ugur, Ozlem; Vergin, Canan; Demirag, Bengü

2016-06-01

This study aimed to develop the Scale for Quality of Life in Pediatric Oncology Patients Aged 13-18: Adolescent Form and Parent Form. We used the child and parent information form, Visual Quality of Life Scale, and our own scale, the Scale for Quality of Life in Pediatric Oncology Patients Aged 13-18: Adolescent Form and Parent Form. We finalized the 35-item scale to determine the items, received opinions from 14 specialists on the scale, and pilot-tested the scale in 25 children and their parents. We used Pearson correlation analysis, Cronbach α coefficient, factor analysis and receiver operating characteristics analysis to analyze the data. The total Cronbach α of the parent form was .97, the total factor load was .60-.97 and the total variance was 80.4%. The cutoff point of the parent form was 85.50. The total Cronbach α of the adolescent form was .98, the total factor load was .62-.96, and the total variance explained was 83.4%. The cutoff point of the adolescent form was 75.50. As a result of the parent form factor analysis, we determined the Kaiser-Meyer-Olkin coefficient as .83, the Barlett test χ(2) as 12,615.92; the factor coefficients of all items of the parent form ranged from .63 to .98. The factor coefficients of all items of the adolescent form ranged from .34 to .99. As a result of the adolescent form factor analysis, we determined the KMO as .79, and the Barlett test χ(2) as 13,970.62. Conclusively, we found that the adolescent form and the parent form were valid and reliable in assessing the children's quality of life. Copyright © 2016. Published by Elsevier B.V.

Management practices and forage quality affecting the contamination of milk with anaerobic spore-forming bacteria.

PubMed

Zucali, Maddalena; Bava, Luciana; Colombini, Stefania; Brasca, Milena; Decimo, Marilù; Morandi, Stefano; Tamburini, Alberto; Crovetto, G Matteo

2015-04-01

Anaerobic spore-forming bacteria (ASFB) in milk derive from the farm environment, and the use of silages and management practices are the main responsible of milk ASFB contamination. The aim of this study was to evaluate the relationships between feeding, milking routine and cow hygiene and milk and Grana Padano cheese (produced with and without lysozyme) ASFB contamination. The study involved 23 dairy farms. ASFB in corn silage were on average 2.34 ± 0.87 log10 MPN g(-1). For grass, Italian ryegrass and alfalfa, ASFB (log10 MPN g(-1)) were numerically higher for silages (3.22) than hays (2.85). The use of corn silages of high quality (high lactic and acetic acids concentrations) decreased the milk ASFB contamination, whilst the use of herbage silages did not affect it. The presence (>40%) of cows with dirty udders increased the ASFB contamination of milk, while forestripping had a positive effect (-9% ASFB). Ripened Grana Padano had an ASFB count below the analytical limit; Clostridium tyrobutyricum DNA was found only in wheels produced without lysozyme, which also showed late blowing. The factors increasing milk spore contamination were corn silage quality, cow udder hygiene and inadequate milking routine. Late blowing was present only in cheeses without lysozyme. © 2014 Society of Chemical Industry.

A Model for Assessing the Clinical and Economic Benefits of Bone-forming Agents for Reducing Fractures in Postmenopausal Women at High, Near-term Risk of Osteoporotic Fracture.

PubMed

O'Hanlon, Claire E; Parthan, Anju; Kruse, Morgan; Cartier, Shannon; Stollenwerk, Bjorn; Jiang, Yawen; Caloyeras, John P; Crittenden, Daria B; Barron, Richard

2017-07-01

The goal of this study was to assess and compare the potential clinical and economic value of emerging bone-forming agents using the only currently available agent, teriparatide, as a reference case in patients at high, near-term (imminent, 1- to 2-year) risk of osteoporotic fractures, extending to a lifetime horizon with sequenced antiresorptive agents for maintenance treatment. Analyses were performed by using a Markov cohort model accounting for time-specific fracture protection effects of bone-forming agents followed by antiresorptive treatment with denosumab. The alternative bone-forming agent profiles were defined by using assumptions regarding the onset and total magnitude of protection against fractures with teriparatide. The model cohort comprised 70-year-old female patients with T scores below -2.5 and a previous vertebral fracture. Outcomes included clinical fractures, direct costs, and quality-adjusted life years. The simulated treatment strategies were compared by calculating their incremental "value" (net monetary benefit). Improvements in the onset and magnitude of fracture protection (vs the teriparatide reference case) produced a net monetary benefit of $17,000,000 per 10,000 treated patients during the (1.5-year) bone-forming agent treatment period and $80,000,000 over a lifetime horizon that included 3.5 years of maintenance treatment with denosumab. Incorporating time-specific fracture effects in the Markov cohort model allowed for estimation of a range of cost savings, quality-adjusted life years gained, and clinical fractures avoided at different levels of fracture protection onset and magnitude. Results provide a first estimate of the potential "value" new bone-forming agents (romosozumab and abaloparatide) may confer relative to teriparatide. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Late adolescent girls' relationships with parents and romantic partner: the distinct role of mothers and fathers.

PubMed

Scharf, Miri; Mayseless, Ofra

2008-12-01

The distinct role of mothers and fathers in shaping the quality of relationships with romantic partner was explored. One hundred and twenty 17-year old girls were observed during their senior year in high school with each of their parents during a Revealed differences task [Allen, J. P., Hauser, S. T., Bell, K. L., Boykin, K. A., & Tate, D. C. (1994). Autonomy and relatedness coding system manual, version 2.01. Unpublished manual] and filled out questionnaires pertaining to their relationships with romantic partners. A year and a half later (7 months after conscription to compulsory military service) they again filled out questionnaires. Whereas self-reports did not distinguish between relations with mothers and fathers observational data revealed that relationships with each parent are associated with somewhat different aspects of the romantic relationship. Better quality of relationship with mother was associated with delays in the girl's entrance into sexual romantic relationships, and with better quality of romantic relationship concurrently whereas better quality of relationship with father was associated with better quality of romantic relationship once they are formed concurrently and longitudinally. The findings highlight the central role that mothers and fathers play in shaping the quality of the romantic relationships that late adolescent girls form and underscore the importance of using observational data as well as questionnaire data.

Crystallization of the carboxy-terminal region of the bacteriophage T4 proximal long tail fibre protein gp34

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granell, Meritxell; Namura, Mikiyoshi; Alvira, Sara

2014-06-19

The crystallization of three C-terminal fragments of the bacteriophage T4 protein gp34 is reported. Diffraction data have been obtained for three native crystal forms and two selenomethionine derivatives, one of which contained high-quality anomalous signal.

Effect of topographic characteristics on compound topographic index for identification of gully channel initiation locations

USDA-ARS?s Scientific Manuscript database

Sediment loads from gully erosion can be a significant sediment source within watershed resulting in major contributions to water quality problems, reduction of crop productivity by removal of nutrient rich top soil, and damaging downstream ecosystems. Areas containing a high probability of forming ...

Local environmental quality positively predicts breastfeeding in the UK’s Millennium Cohort Study

PubMed Central

Sear, Rebecca

2017-01-01

ABSTRACT Background and Objectives: Breastfeeding is an important form of parental investment with clear health benefits. Despite this, rates remain low in the UK; understanding variation can therefore help improve interventions. Life history theory suggests that environmental quality may pattern maternal investment, including breastfeeding. We analyse a nationally representative dataset to test two predictions: (i) higher local environmental quality predicts higher likelihood of breastfeeding initiation and longer duration; (ii) higher socioeconomic status (SES) provides a buffer against the adverse influences of low local environmental quality. Methodology: We ran factor analysis on a wide range of local-level environmental variables. Two summary measures of local environmental quality were generated by this analysis—one ‘objective’ (based on an independent assessor’s neighbourhood scores) and one ‘subjective’ (based on respondent’s scores). We used mixed-effects regression techniques to test our hypotheses. Results: Higher objective, but not subjective, local environmental quality predicts higher likelihood of starting and maintaining breastfeeding over and above individual SES and area-level measures of environmental quality. Higher individual SES is protective, with women from high-income households having relatively high breastfeeding initiation rates and those with high status jobs being more likely to maintain breastfeeding, even in poor environmental conditions. Conclusions and Implications: Environmental quality is often vaguely measured; here we present a thorough investigation of environmental quality at the local level, controlling for individual- and area-level measures. Our findings support a shift in focus away from individual factors and towards altering the landscape of women’s decision making contexts when considering behaviours relevant to public health. PMID:29354262

Local environmental quality positively predicts breastfeeding in the UK's Millennium Cohort Study.

PubMed

Brown, Laura J; Sear, Rebecca

2017-01-01

Background and Objectives: Breastfeeding is an important form of parental investment with clear health benefits. Despite this, rates remain low in the UK; understanding variation can therefore help improve interventions. Life history theory suggests that environmental quality may pattern maternal investment, including breastfeeding. We analyse a nationally representative dataset to test two predictions: (i) higher local environmental quality predicts higher likelihood of breastfeeding initiation and longer duration; (ii) higher socioeconomic status (SES) provides a buffer against the adverse influences of low local environmental quality. Methodology: We ran factor analysis on a wide range of local-level environmental variables. Two summary measures of local environmental quality were generated by this analysis-one 'objective' (based on an independent assessor's neighbourhood scores) and one 'subjective' (based on respondent's scores). We used mixed-effects regression techniques to test our hypotheses. Results: Higher objective, but not subjective, local environmental quality predicts higher likelihood of starting and maintaining breastfeeding over and above individual SES and area-level measures of environmental quality. Higher individual SES is protective, with women from high-income households having relatively high breastfeeding initiation rates and those with high status jobs being more likely to maintain breastfeeding, even in poor environmental conditions. Conclusions and Implications: Environmental quality is often vaguely measured; here we present a thorough investigation of environmental quality at the local level, controlling for individual- and area-level measures. Our findings support a shift in focus away from individual factors and towards altering the landscape of women's decision making contexts when considering behaviours relevant to public health.

Preparation and Analysis of RNA Crystals

NASA Technical Reports Server (NTRS)

Todd, Paul

2000-01-01

The crystallization of RiboNucleic Acids (RNA) was studied from the standpoint of mechanisms of crystal growth in three tasks: (1) preparation of high-quality crystals of oligonuclotides for X-ray diffraction, (2) finding pathways to the growth of high-quality crystals for X-ray diffraction and (3) investigation of mechanisms of action of inertial acceleration on crystal growth. In these tasks: (1) RNA crystals were prepared and studied by X-ray diffraction; (2) a pathway to high-quality crystals was discovered and characterized; a combination of kinetic and equilibrium factors could be optimized as described below; and (3) an interplay between purity and gravity was found in a combination of space and ground experiments with nucleic acids and proteins. Most significantly, the rate of concentration of precipitant and RNA can be controlled by membrane-based methods of water removal or by diffusion of multivalent cations across an interface stabilized by a membrane. Oligonucleotide solutions are electrokinetically stabilized colloids, and crystals can form by the controlled addition of multivalent cations.

Atomically Precise Surface Engineering for Producing Imagers

NASA Technical Reports Server (NTRS)

Nikzad, Shouleh (Inventor); Hoenk, Michael E. (Inventor); Greer, Frank (Inventor); Jones, Todd J. (Inventor)

2015-01-01

High-quality surface coatings, and techniques combining the atomic precision of molecular beam epitaxy and atomic layer deposition, to fabricate such high-quality surface coatings are provided. The coatings made in accordance with the techniques set forth by the invention are shown to be capable of forming silicon CCD detectors that demonstrate world record detector quantum efficiency (>50%) in the near and far ultraviolet (155 nm-300 nm). The surface engineering approaches used demonstrate the robustness of detector performance that is obtained by achieving atomic level precision at all steps in the coating fabrication process. As proof of concept, the characterization, materials, and exemplary devices produced are presented along with a comparison to other approaches.

High quality draft genome sequence of the moderately halophilic bacterium Pontibacillus yanchengensis Y32(T) and comparison among Pontibacillus genomes.

PubMed

Huang, Jing; Qiao, Zi Xu; Tang, Jing Wei; Wang, Gejiao

2015-01-01

Pontibacillus yanchengensis Y32(T) is an aerobic, motile, Gram-positive, endospore-forming, and moderately halophilic bacterium isolated from a salt field. In this study, we describe the features of P. yanchengensis strain Y32(T) together with a comparison with other four Pontibacillus genomes. The 4,281,464 bp high-quality-draft genome of strain Y32(T) is arranged into 153 contigs containing 3,965 protein-coding genes and 77 RNA encoding genes. The genome of strain Y32(T) possesses many genes related to its halophilic character, flagellar assembly and chemotaxis to support its survival in a salt-rich environment.

Developing an item bank and short forms that assess the impact of asthma on quality of life.

PubMed

Stucky, Brian D; Edelen, Maria Orlando; Sherbourne, Cathy D; Eberhart, Nicole K; Lara, Marielena

2014-02-01

The present work describes the process of developing an item bank and short forms that measure the impact of asthma on quality of life (QoL) that avoids confounding QoL with asthma symptomatology and functional impairment. Using a diverse national sample of adults with asthma (N = 2032) we conducted exploratory and confirmatory factor analyses, and item response theory and differential item functioning analyses to develop a 65-item unidimensional item bank and separate short form assessments. A psychometric evaluation of the RAND Impact of Asthma on QoL item bank (RAND-IAQL) suggests that though the concept of asthma impact on QoL is multi-faceted, it may be measured as a single underlying construct. The performance of the bank was then evaluated with a real-data simulated computer adaptive test. From the RAND-IAQL item bank we then developed two short forms consisting of 4 and 12 items (reliability = 0.86 and 0.93, respectively). A real-data simulated computer adaptive test suggests that as few as 4-5 items from the bank are needed to obtain highly precise scores. Preliminary validity results indicate that the RAND-IAQL measures distinguish between levels of asthma control. To measure the impact of asthma on QoL, users of these items may choose from two highly reliable short forms, computer adaptive test administration, or content-specific subsets of items from the bank tailored to their specific needs. Copyright © 2013 Elsevier Ltd. All rights reserved.

High-Q Wafer Level Package Based on Modified Tri-Layer Anodic Bonding and High Performance Getter and Its Evaluation for Micro Resonant Pressure Sensor.

PubMed

Wang, Liying; Du, Xiaohui; Wang, Lingyun; Xu, Zhanhao; Zhang, Chenying; Gu, Dandan

2017-03-16

In order to achieve and maintain a high quality factor (high-Q) for the micro resonant pressure sensor, this paper presents a new wafer level package by adopting cross-layer anodic bonding technique of the glass/silicon/silica (GSS) stackable structure and integrated Ti getter. A double-layer structure similar to a silicon-on-insulator (SOI) wafer is formed after the resonant layer and the pressure-sensitive layer are bonded by silicon direct bonding (SDB). In order to form good bonding quality between the pressure-sensitive layer and the glass cap layer, the cross-layer anodic bonding technique is proposed for vacuum package by sputtering Aluminum (Al) on the combination wafer of the pressure-sensitive layer and the resonant layer to achieve electrical interconnection. The model and the bonding effect of this technique are discussed. In addition, in order to enhance the performance of titanium (Ti) getter, the prepared and activation parameters of Ti getter under different sputtering conditions are optimized and discussed. Based on the optimized results, the Ti getter (thickness of 300 nm to 500 nm) is also deposited on the inside of the glass groove by magnetron sputtering to maintain stable quality factor (Q). The Q test of the built testing system shows that the number of resonators with a Q value of more than 10,000 accounts for more than 73% of the total. With an interval of 1.5 years, the Q value of the samples remains almost constant. It proves the proposed cross-layer anodic bonding and getter technique can realize high-Q resonant structure for long-term stable operation.

The Quality of Selected Essential Medicines Sold in Accredited Drug Dispensing Outlets and Pharmacies in Tanzania.

PubMed

Kaale, Eliangiringa; Manyanga, Vicky; Chambuso, Mhina; Liana, Jafary; Rutta, Edmund; Embrey, Martha; Layloff, Thomas; Johnson, Keith

2016-01-01

The purpose of this study was to investigate the quality of a select group of medicines sold in accredited drug dispensing outlets (ADDOs) and pharmacies in different regions of Tanzania as part of an in-depth cross-sectional assessment of community access to medicines and community use of medicines. We collected 242 samples of amoxicillin trihydrate, artemether-lumefantrine (ALu), co-trimoxazole, ergometrine maleate, paracetamol, and quinine from selected ADDOs and pharmacies in Mbeya, Morogoro, Singida, and Tanga regions. The analysis included physical examination and testing with validated analytical techniques. Assays for eight of nine products were conducted using high-performance thin-layer chromatography (HPTLC). For ALu tablets, we used a two-tiered approach, where tier 1 was a semi-quantitative Global Pharma Health Fund-Minilab® method and tier 2 was high-performance liquid chromatography (HPLC) as described in The International Pharmacopoeia's monograph for artemether-lumefantrine. The physical examination of samples revealed no defects in the solid and oral liquid dosage forms, but unusual discoloration in an injectable solution, ergometrine maleate. For ALu, the results showed that of 38 samples, 31 (81.6%) passed tier 1 testing and 7 (18.4%) gave inconclusive drug content results. The inconclusive ALu samples were submitted for tier 2 testing and all met the quality standards. The pass rate using the HPTLC and TLC/HPLC assays was 93.8%; the failures were the ergometrine maleate samples purchased from both ADDOs and pharmacies. The disintegration testing of the solid dosage forms was conducted in accordance with US Pharmacopeia monographs. Only two samples of paracetamol, 1.2% of the solid dosage forms, failed to comply to standards. The study revealed a high overall rate of 92.6% of samples that met the quality standards. Although the overall failure rate was 7.4%, it is important to note that this was largely limited to one product and likely due to poor distribution and storage rather than poor manufacturing practices. Over 90% of the medicines sold in ADDOs and pharmacies met quality standards. Policy makers need to reconsider ergometrine maleate's place on the list of medicines that ADDOs are allowed to dispense, by either substituting a more temperature-stable therapeutically equivalent product or requiring those sites to have refrigerators, which is not a feasible option for rural Tanzania.

The Quality of Selected Essential Medicines Sold in Accredited Drug Dispensing Outlets and Pharmacies in Tanzania

PubMed Central

Manyanga, Vicky; Chambuso, Mhina; Liana, Jafary; Rutta, Edmund; Embrey, Martha; Layloff, Thomas; Johnson, Keith

2016-01-01

Introduction The purpose of this study was to investigate the quality of a select group of medicines sold in accredited drug dispensing outlets (ADDOs) and pharmacies in different regions of Tanzania as part of an in-depth cross-sectional assessment of community access to medicines and community use of medicines. Methods We collected 242 samples of amoxicillin trihydrate, artemether-lumefantrine (ALu), co-trimoxazole, ergometrine maleate, paracetamol, and quinine from selected ADDOs and pharmacies in Mbeya, Morogoro, Singida, and Tanga regions. The analysis included physical examination and testing with validated analytical techniques. Assays for eight of nine products were conducted using high-performance thin-layer chromatography (HPTLC). For ALu tablets, we used a two-tiered approach, where tier 1 was a semi-quantitative Global Pharma Health Fund-Minilab® method and tier 2 was high-performance liquid chromatography (HPLC) as described in The International Pharmacopoeia’s monograph for artemether-lumefantrine. Results and Discussion The physical examination of samples revealed no defects in the solid and oral liquid dosage forms, but unusual discoloration in an injectable solution, ergometrine maleate. For ALu, the results showed that of 38 samples, 31 (81.6%) passed tier 1 testing and 7 (18.4%) gave inconclusive drug content results. The inconclusive ALu samples were submitted for tier 2 testing and all met the quality standards. The pass rate using the HPTLC and TLC/HPLC assays was 93.8%; the failures were the ergometrine maleate samples purchased from both ADDOs and pharmacies. The disintegration testing of the solid dosage forms was conducted in accordance with US Pharmacopeia monographs. Only two samples of paracetamol, 1.2% of the solid dosage forms, failed to comply to standards. The study revealed a high overall rate of 92.6% of samples that met the quality standards. Although the overall failure rate was 7.4%, it is important to note that this was largely limited to one product and likely due to poor distribution and storage rather than poor manufacturing practices. Conclusions Over 90% of the medicines sold in ADDOs and pharmacies met quality standards. Policy makers need to reconsider ergometrine maleate’s place on the list of medicines that ADDOs are allowed to dispense, by either substituting a more temperature-stable therapeutically equivalent product or requiring those sites to have refrigerators, which is not a feasible option for rural Tanzania. PMID:27846216

Impact of antinutritional factors in food proteins on the digestibility of protein and the bioavailability of amino acids and on protein quality.

PubMed

Sarwar Gilani, G; Wu Xiao, Chao; Cockell, Kevin A

2012-08-01

Dietary antinutritional factors have been reported to adversely affect the digestibility of protein, bioavailability of amino acids and protein quality of foods. Published data on these negative effects of major dietary antinutritional factors are summarized in this manuscript. Digestibility and the quality of mixed diets in developing countries are considerably lower than of those in developed regions. For example, the digestibility of protein in traditional diets from developing countries such as India, Guatemala and Brazil is considerably lower compared to that of protein in typical North American diets (54-78 versus 88-94 %). Poor digestibility of protein in the diets of developing countries, which are based on less refined cereals and grain legumes as major sources of protein, is due to the presence of less digestible protein fractions, high levels of insoluble fibre, and/or high concentrations of antinutritional factors present endogenously or formed during processing. Examples of naturally occurring antinutritional factors include glucosinolates in mustard and canola protein products, trypsin inhibitors and haemagglutinins in legumes, tannins in legumes and cereals, gossypol in cottonseed protein products, and uricogenic nucleobases in yeast protein products. Heat/alkaline treatments of protein products may yield Maillard reaction compounds, oxidized forms of sulphur amino acids, D-amino acids and lysinoalanine (LAL, an unnatural nephrotoxic amino acid derivative). Among common food and feed protein products, soyabeans are the most concentrated source of trypsin inhibitors. The presence of high levels of dietary trypsin inhibitors from soyabeans, kidney beans or other grain legumes have been reported to cause substantial reductions in protein and amino acid digestibility (up to 50 %) and protein quality (up to 100 %) in rats and/or pigs. Similarly, the presence of high levels of tannins in sorghum and other cereals, fababean and other grain legumes can cause significant reductions (up to 23 %) in protein and amino acid digestibility in rats, poultry, and pigs. Normally encountered levels of phytates in cereals and legumes can reduce protein and amino acid digestibility by up to 10 %. D-amino acids and LAL formed during alkaline/heat treatment of lactalbumin, casein, soya protein or wheat protein are poorly digestible (less than 40 %), and their presence can reduce protein digestibility by up to 28 % in rats and pigs, and can cause a drastic reduction (100 %) in protein quality, as measured by rat growth methods. The adverse effects of antinutritional factors on protein digestibility and protein quality have been reported to be more pronounced in elderly rats (20-months old) compared to young (5-weeks old) rats, suggesting the use of old rats as a model for assessing the protein digestibility of products intended for the elderly.

Development and manufacture of reactive-transfer-printed CIGS photovoltaic modules

NASA Astrophysics Data System (ADS)

Eldada, Louay; Sang, Baosheng; Lu, Dingyuan; Stanbery, Billy J.

2010-09-01

In recent years, thin-film photovoltaic (PV) companies started realizing their low manufacturing cost potential, and grabbing an increasingly larger market share from multicrystalline silicon companies. Copper Indium Gallium Selenide (CIGS) is the most promising thin-film PV material, having demonstrated the highest energy conversion efficiency in both cells and modules. However, most CIGS manufacturers still face the challenge of delivering a reliable and rapid manufacturing process that can scale effectively and deliver on the promise of this material system. HelioVolt has developed a reactive transfer process for CIGS absorber formation that has the benefits of good compositional control, high-quality CIGS grains, and a fast reaction. The reactive transfer process is a two stage CIGS fabrication method. Precursor films are deposited onto substrates and reusable print plates in the first stage, while in the second stage, the CIGS layer is formed by rapid heating with Se confinement. High quality CIGS films with large grains were produced on a full-scale manufacturing line, and resulted in high-efficiency large-form-factor modules. With 14% cell efficiency and 12% module efficiency, HelioVolt started to commercialize the process on its first production line with 20 MW nameplate capacity.

Self-Functionalization Behind a Solution-Processed NiOx Film Used As Hole Transporting Layer for Efficient Perovskite Solar Cells.

PubMed

Ciro, John; Ramírez, Daniel; Mejía Escobar, Mario Alejandro; Montoya, Juan Felipe; Mesa, Santiago; Betancur, Rafael; Jaramillo, Franklin

2017-04-12

Fabrication of solution-processed perovskite solar cells (PSCs) requires the deposition of high quality films from precursor inks. Frequently, buffer layers of PSCs are formed from dispersions of metal oxide nanoparticles (NPs). Therefore, the development of trustable methods for the preparation of stable colloidal NPs dispersions is crucial. In this work, a novel approach to form very compact semiconducting buffer layers with suitable optoelectronic properties is presented through a self-functionalization process of the nanocrystalline particles by their own amorphous phase and without adding any other inorganic or organic functionalization component or surfactant. Such interconnecting amorphous phase composed by residual nitrate, hydroxide, and sodium ions, proved to be fundamental to reach stable colloidal dispersions and contribute to assemble the separate crystalline nickel oxide NPs in the final film, resulting in a very homogeneous and compact layer. A proposed mechanism behind the great stabilization of the nanoparticles is exposed. At the end, the self-functionalized nickel oxide layer exhibited high optoelectronic properties enabling perovskite p-i-n solar cells as efficient as 16.6% demonstrating the pertinence of the presented strategy to obtain high quality buffer layers processed in solution at room temperature.

A Gene Pushes Some Men Away from College, but Social Support Pulls Them in

ERIC Educational Resources Information Center

Glenn, David

2009-01-01

This article reports that a new study has found that young men are less likely to attend college if they carry a common form of a gene associated with poor impulse control. The study also found that a strong environment--a high-quality high school and heavily involved parents--can counteract that genetic risk. For boys with this gene who grow up…

Development of Assessment Instrument of Critical Thinking in Physics at Senior High School

NASA Astrophysics Data System (ADS)

Sugiarti, T.; Kaniawati, I.; Aviyanti, L.

2017-02-01

The result of preliminary study shows that the assessment of physics in school did not train students’ critical thinking skill. The assessment instrument just measured low cognitive aspects. Supposedly, critical thinking skill is trained in the assessment activity. The study aims to determine the characteristics and the quality of critical thinking skill instrument. It employs descriptive-qualitative method with research and development as the research design. The research participants are 35 students involved in the limited trial and 188 students in the wider trial from three public senior high school in Ciamis which in high level school. The data was collected through expert validation, tests and interviews. The results indicate that the characteristics of the assessment instrument of critical thinking skill is open-ended. The instrument fulfills some indicators namely analyzing argument, deduction, induction, and display information in the form of scenario, text, graphic and table. In addition, the data processing through V4 Anates program shows that the instrument reliability achieves 0.67 with high interpretation of 0.67 and the validity is 0.47 with enough interpretation. Thus, the assessment instrument of critical thinking skill in the form of open-ended essay meets the criteria of quality test, so it can use as instrument of assessment critical thinking skill.

Comparative Genomics as a Foundation for Evo-Devo Studies in Birds.

PubMed

Grayson, Phil; Sin, Simon Y W; Sackton, Timothy B; Edwards, Scott V

2017-01-01

Developmental genomics is a rapidly growing field, and high-quality genomes are a useful foundation for comparative developmental studies. A high-quality genome forms an essential reference onto which the data from numerous assays and experiments, including ChIP-seq, ATAC-seq, and RNA-seq, can be mapped. A genome also streamlines and simplifies the development of primers used to amplify putative regulatory regions for enhancer screens, cDNA probes for in situ hybridization, microRNAs (miRNAs) or short hairpin RNAs (shRNA) for RNA interference (RNAi) knockdowns, mRNAs for misexpression studies, and even guide RNAs (gRNAs) for CRISPR knockouts. Finally, much can be gleaned from comparative genomics alone, including the identification of highly conserved putative regulatory regions. This chapter provides an overview of laboratory and bioinformatics protocols for DNA extraction, library preparation, library quantification, and genome assembly, from fresh or frozen tissue to a draft avian genome. Generating a high-quality draft genome can provide a developmental research group with excellent resources for their study organism, opening the doors to many additional assays and experiments.

The Prevalence and Control of Bacillus and Related Spore-Forming Bacteria in the Dairy Industry.

PubMed

Gopal, Nidhi; Hill, Colin; Ross, Paul R; Beresford, Tom P; Fenelon, Mark A; Cotter, Paul D

2015-01-01

Milk produced in udder cells is sterile but due to its high nutrient content, it can be a good growth substrate for contaminating bacteria. The quality of milk is monitored via somatic cell counts and total bacterial counts, with prescribed regulatory limits to ensure quality and safety. Bacterial contaminants can cause disease, or spoilage of milk and its secondary products. Aerobic spore-forming bacteria, such as those from the genera Sporosarcina, Paenisporosarcina, Brevibacillus, Paenibacillus, Geobacillus and Bacillus, are a particular concern in this regard as they are able to survive industrial pasteurization and form biofilms within pipes and stainless steel equipment. These single or multiple-species biofilms become a reservoir of spoilage microorganisms and a cycle of contamination can be initiated. Indeed, previous studies have highlighted that these microorganisms are highly prevalent in dead ends, corners, cracks, crevices, gaskets, valves and the joints of stainless steel equipment used in the dairy manufacturing plants. Hence, adequate monitoring and control measures are essential to prevent spoilage and ensure consumer safety. Common controlling approaches include specific cleaning-in-place processes, chemical and biological biocides and other novel methods. In this review, we highlight the problems caused by these microorganisms, and discuss issues relating to their prevalence, monitoring thereof and control with respect to the dairy industry.

The Prevalence and Control of Bacillus and Related Spore-Forming Bacteria in the Dairy Industry

PubMed Central

Gopal, Nidhi; Hill, Colin; Ross, Paul R.; Beresford, Tom P.; Fenelon, Mark A.; Cotter, Paul D.

2015-01-01

Milk produced in udder cells is sterile but due to its high nutrient content, it can be a good growth substrate for contaminating bacteria. The quality of milk is monitored via somatic cell counts and total bacterial counts, with prescribed regulatory limits to ensure quality and safety. Bacterial contaminants can cause disease, or spoilage of milk and its secondary products. Aerobic spore-forming bacteria, such as those from the genera Sporosarcina, Paenisporosarcina, Brevibacillus, Paenibacillus, Geobacillus and Bacillus, are a particular concern in this regard as they are able to survive industrial pasteurization and form biofilms within pipes and stainless steel equipment. These single or multiple-species biofilms become a reservoir of spoilage microorganisms and a cycle of contamination can be initiated. Indeed, previous studies have highlighted that these microorganisms are highly prevalent in dead ends, corners, cracks, crevices, gaskets, valves and the joints of stainless steel equipment used in the dairy manufacturing plants. Hence, adequate monitoring and control measures are essential to prevent spoilage and ensure consumer safety. Common controlling approaches include specific cleaning-in-place processes, chemical and biological biocides and other novel methods. In this review, we highlight the problems caused by these microorganisms, and discuss issues relating to their prevalence, monitoring thereof and control with respect to the dairy industry. PMID:26733963

Effect of different fibers on dough properties and biscuit quality.

PubMed

Blanco Canalis, María S; Steffolani, María E; León, Alberto E; Ribotta, Pablo D

2017-03-01

This study forms part of a broader project aimed at understanding the role of fibers from different sources in high-fat, high-sugar biscuits and at selecting the best fibers for biscuit quality. The main purpose of this work was to understand the rheological and structural properties involved in fiber-enriched biscuit dough. High-amylose corn starch (RSII), chemically modified starch (RSIV), oat fiber (OF) and inulin (IN) were used at two different levels of incorporation (6 and 12 g) in dough formulation. The influence of fiber on the properties of biscuit dough was studied via dynamic rheological tests, confocal microscopy and spreading behavior. Biscuit quality was assessed by width/thickness factor, texture and surface characteristics, total dietary fiber and sensory evaluation. Main results indicated that IN incorporation increased the capacity of dough spreading during baking and thus improved biscuit quality. OF reduced dough spreading during baking and strongly increased its resistance to deformation. RSII and RSIV slightly affected the quality of the biscuits. Sensory evaluation revealed that the panel liked IN-incorporated biscuits as much as control biscuits. The increase in total dietary fiber modified dough behavior and biscuit properties, and the extent of these effects depended on the type of fiber incorporated. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Drop-on-Demand System for Manufacturing of Melt-based Solid Oral Dosage: Effect of Critical Process Parameters on Product Quality.

PubMed

Içten, Elçin; Giridhar, Arun; Nagy, Zoltan K; Reklaitis, Gintaras V

2016-04-01

The features of a drop-on-demand-based system developed for the manufacture of melt-based pharmaceuticals have been previously reported. In this paper, a supervisory control system, which is designed to ensure reproducible production of high quality of melt-based solid oral dosages, is presented. This control system enables the production of individual dosage forms with the desired critical quality attributes: amount of active ingredient and drug morphology by monitoring and controlling critical process parameters, such as drop size and product and process temperatures. The effects of these process parameters on the final product quality are investigated, and the properties of the produced dosage forms characterized using various techniques, such as Raman spectroscopy, optical microscopy, and dissolution testing. A crystallization temperature control strategy, including controlled temperature cycles, is presented to tailor the crystallization behavior of drug deposits and to achieve consistent drug morphology. This control strategy can be used to achieve the desired bioavailability of the drug by mitigating variations in the dissolution profiles. The supervisor control strategy enables the application of the drop-on-demand system to the production of individualized dosage required for personalized drug regimens.

The forensic psychiatric report.

PubMed

Norko, Michael A; Buchanan, Mar Alec

2015-01-01

The construction of a written forensic report is a core component of forensic practice, demonstrating the evaluator's skill in conducting the evaluation and in communicating relevant information to the legal audience in an effective manner. Although communication skills and quality of written documentation are important in clinical psychiatry generally, they form the sine qua non of successful forensic work, which consists in telling complex stories in a coherent and compelling fashion. High quality forensic reports require careful preparation from the earliest stages of work on a case. They generally follow an expected structure, which permits the evaluator to provide all the data necessary to form a carefully reasoned opinion that addresses the legal questions posed. Formats and content of reports vary according to the type of case and the circumstances of the evaluation and so require flexibility within customary frameworks. The style and quality of writing are critical to the crafting of forensic reports. The effects on legal decision-makers of various approaches to the presentation of information in reports has not been studied empirically, but guidance from experienced forensic psychiatrists is available. There is a small body of research on quality improvement in forensic writing, and further empiric study is warranted.

Quality of life of patients who undergo breast reconstruction after mastectomy: effects of personality characteristics.

PubMed

Bellino, Silvio; Fenocchio, Marina; Zizza, Monica; Rocca, Giuseppe; Bogetti, Paolo; Bogetto, Filippo

2011-01-01

Reconstruction after mastectomy has become an integral part of breast cancer treatment. The effects of psychological factors on quality of life after reconstruction have been poorly investigated. The authors examined clinical and personality characteristics related to quality of life in patients receiving reconstructive surgery. All patients received immediate reconstruction and were evaluated in the week before tissue expander implantation (T0) with a semistructured interview for demographic and clinical characteristics, the Temperament and Character Inventory, the Inventory of Interpersonal Problems, the Short Form Health Survey, the Severity Item of the Clinical Global Impression, the Hamilton Depression Rating Scale, and the Hamilton Anxiety Rating Scale. Assessment with the Short Form was repeated 3 months after expander placement (T1). Statistics were calculated with univariate regression and analysis of variance. Significant variables were included in a multiple regression analysis to identify factors related to the change T1-T0 of the mean of the Short Form-transformed scores. Results were significant when p was less than or equal to 0.05. Fifty-seven women were enrolled. Results of multiple regression analysis showed that the Temperament and Character Inventory personality dimension harm avoidance and the Inventory of Interpersonal Problems domain vindictive/self-centered were significantly and independently related to the change in Short Form mean score. Personality dimensions and patterns of interpersonal functioning produce significant effects on patients' quality of life during breast reconstruction. Patients with high harm avoidance are apprehensive and doubtful. Restoration of body image could help them to reduce social anxiety and insecurity. Vindictive/self-centered patients are resentful and aggressive. Breast reconstruction could symbolize the conclusion of a reparative process and fulfill the desire of revenge on cancer.

Completeness of tuberculosis reporting forms in five Brazilian capitals with a high incidence of the disease.

PubMed

Santos, Normeide Pedreira dos; Lírio, Monique; Passos, Louran Andrade Reis; Dias, Juarez Pereira; Kritski, Afrânio Lineu; Galvão-Castro, Bernardo; Grassi, Maria Fernanda Rios

2013-01-01

The aim of this study was to evaluate the completeness of tuberculosis reporting forms in the greater metropolitan areas of five Brazilian capitals where the incidence of tuberculosis was high in 2010 - Salvador, Rio de Janeiro, Cuiabá, Porto Alegre, and Belém - using tabulations obtained from the Sistema Nacional de Informação de Agravos de Notificação (National Case Registry Database). The degree of completeness was highest in Porto Alegre and Cuiabá, whereas it was lowest in Rio de Janeiro, where there are more reported cases of tuberculosis than in any other Brazilian capital. A low degree of completeness of these forms can affect the quality of the Brazilian National Tuberculosis Control Program, which will have negative consequences for health care and decision-making processes.

Completeness of tuberculosis reporting forms in five Brazilian capitals with a high incidence of the disease *

PubMed Central

dos Santos, Normeide Pedreira; Lírio, Monique; Passos, Louran Andrade Reis; Dias, Juarez Pereira; Kritski, Afrânio Lineu; Galvão-Castro, Bernardo; Grassi, Maria Fernanda Rios

2013-01-01

The aim of this study was to evaluate the completeness of tuberculosis reporting forms in the greater metropolitan areas of five Brazilian capitals where the incidence of tuberculosis was high in 2010-Salvador, Rio de Janeiro, Cuiabá, Porto Alegre, and Belém-using tabulations obtained from the Sistema Nacional de Informação de Agravos de Notificação (National Case Registry Database). The degree of completeness was highest in Porto Alegre and Cuiabá, whereas it was lowest in Rio de Janeiro, where there are more reported cases of tuberculosis than in any other Brazilian capital. A low degree of completeness of these forms can affect the quality of the Brazilian National Tuberculosis Control Program, which will have negative consequences for health care and decision-making processes. PMID:23670508

High-quality permanent draft genome sequence of the Lebeckia - nodulating Burkholderia dilworthii strain WSM3556T

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Meyer, Sofie E.; Tian, Rui; Seshadri, Rekha

Burkholderia dilworthii strain WSM3556T is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective N2-fixing root nodule of Lebeckia ambigua collected near Grotto Bay Nature Reserve, in the Western Cape of South Africa, in October 2004. This plant persists in infertile and deep sandy soils with acidic pH, and is therefore an ideal candidate for a perennial based agriculture system in Western Australia. WSM3556T thus represents a potential inoculant quality strain for L. ambigua for which we describe the general features, together with genome sequence and annotation. Lastly, the 7,679,067 bp high-quality permanent draft genome is arrangedmore » in 140 scaffolds of 141 contigs, contains 7,059 protein-coding genes and 64 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.« less

High-quality permanent draft genome sequence of the Lebeckia ambigua-nodulating Burkholderia sp. strain WSM4176

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Meyer, Sofie E.; Tian, Rui; Seshadri, Rekha

We report that Burkholderia sp. strain WSM4176 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective N2-fixing root nodule of Lebeckia ambigua collected in Nieuwoudtville, Western Cape of South Africa, in October 2007. This plant persists in infertile, acidic and deep sandy soils, and is therefore an ideal candidate for a perennial based agriculture system in Western Australia. Here we describe the features of Burkholderia sp. strain WSM4176, which represents a potential inoculant quality strain for L. ambigua, together with sequence and annotation. The 9,065,247 bp high-quality-draft genome is arranged in 13 scaffolds of 65 contigs,more » contains 8369 protein-coding genes and 128 RNA-only encoding genes, and is part of the GEBA-RNB project proposal (Project ID 882).« less

High-quality permanent draft genome sequence of the Lebeckia - nodulating Burkholderia dilworthii strain WSM3556T

DOE PAGES

De Meyer, Sofie E.; Tian, Rui; Seshadri, Rekha; ...

2015-09-19

Burkholderia dilworthii strain WSM3556T is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective N2-fixing root nodule of Lebeckia ambigua collected near Grotto Bay Nature Reserve, in the Western Cape of South Africa, in October 2004. This plant persists in infertile and deep sandy soils with acidic pH, and is therefore an ideal candidate for a perennial based agriculture system in Western Australia. WSM3556T thus represents a potential inoculant quality strain for L. ambigua for which we describe the general features, together with genome sequence and annotation. Lastly, the 7,679,067 bp high-quality permanent draft genome is arrangedmore » in 140 scaffolds of 141 contigs, contains 7,059 protein-coding genes and 64 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.« less

High-quality permanent draft genome sequence of the Lebeckia ambigua-nodulating Burkholderia sp. strain WSM4176

DOE PAGES

De Meyer, Sofie E.; Tian, Rui; Seshadri, Rekha; ...

2015-10-16

We report that Burkholderia sp. strain WSM4176 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective N2-fixing root nodule of Lebeckia ambigua collected in Nieuwoudtville, Western Cape of South Africa, in October 2007. This plant persists in infertile, acidic and deep sandy soils, and is therefore an ideal candidate for a perennial based agriculture system in Western Australia. Here we describe the features of Burkholderia sp. strain WSM4176, which represents a potential inoculant quality strain for L. ambigua, together with sequence and annotation. The 9,065,247 bp high-quality-draft genome is arranged in 13 scaffolds of 65 contigs,more » contains 8369 protein-coding genes and 128 RNA-only encoding genes, and is part of the GEBA-RNB project proposal (Project ID 882).« less

[Formal quality assessment of informed consent documents in 9 hospitals].

PubMed

Calle-Urra, J E; Parra-Hidalgo, P; Saturno-Hernández, P J; Martínez-Martínez, M J; Navarro-Moya, F J

2013-01-01

Informed consent forms are very important in the process of medical information. The aim of this study is to design reliable formal quality criteria of these documents and their application in the evaluation of those used in the hospitals of a regional health service. Criteria have been designed from the analysis of existing regulations, previous studies and consultation with key experts. The interobserver concordance was assessed using the kappa index. Criteria evaluation was performed on 1425 documents of 9 hospitals. A total of 19 criteria used in the evaluation of the quality of informed consent forms have been obtained. Kappa values were higher than 0,60 in 17 of them and higher than 0,52 in the other 2. The average number of defects per document was 7.6, with a high-low ratio among hospitals of 1.84. More than 90% of the documents had defects in the information on consequences and contraindications, and in about 90% it did not mention the copy to the patient. More than 60% did not comply with stating the purpose of the procedure, a statement of having understood and clarified doubts, and the treatment options. A tool has been obtained to reliably assess the formal quality of the informed consent forms. The documents assessed have a wide margin for improvement related to giving a copy to the patient, and some aspects of the specific information that patients should receive. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

Changes in the physical properties of the dynamic layer and its correlation with permeate quality in a self-forming dynamic membrane bioreactor.

PubMed

Guan, Dao; Dai, Ji; Watanabe, Yoshimasa; Chen, Guanghao

2018-09-01

The self-forming dynamic membrane bioreactor (SFDMBR) is a biological wastewater treatment technology based on the conventional membrane bioreactor (MBR) with membrane material modification to a large pore size (30-100 μm). This modification requires a dynamic layer formed by activated sludge to provide effective filtration function for high-quality permeate production. The properties of the dynamic layer are therefore important for permeate quality in SFDMBRs. The interaction between the structure of the dynamic layer and the performance of SFDMBRs is little known but understandably complex. To elucidate the interaction, a lab-scale SFDMBR system coupled with a nylon woven mesh as the supporting material was operated. After development of a mature dynamic layer, excellent solid-liquid separation was achieved, as evidenced by a low permeate turbidity of less than 2 NTU. The permeate turbidity stayed below this level for nearly 80 days. In the fouling phase, the dynamic layer was compressed with an increase in the trans-membrane pressure and the quality of the permeate kept deteriorating until the turbidity exceeded 10 NTU. The investigation revealed that the majority of permeate particles were dissociated from the dynamic layer on the back surface of the supporting material, which is caused by the compression, breakdown, and dissociation of the dynamic layer. This phenomenon was observed directly in experiment instead of model prediction or conjecture for the first time. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluating the feasibility of using online software to collect patient information in a chiropractic practice-based research network

PubMed Central

Kania-Richmond, Ania; Weeks, Laura; Scholten, Jeffrey; Reney, Mikaël

2016-01-01

Background: Practice based research networks (PBRNs) are increasingly used as a tool for evidence based practice. We developed and tested the feasibility of using software to enable online collection of patient data within a chiropractic PBRN to support clinical decision making and research in participating clinics. Purpose: To assess the feasibility of using online software to collect quality patient information. Methods: The study consisted of two phases: 1) Assessment of the quality of information provided, using a standardized form; and 2) Exploration of patients’ perspectives and experiences regarding online information provision through semi-structured interviews. Data analysis was descriptive. Results: Forty-five new patients were recruited. Thirty-six completed online forms, which were submitted by an appropriate person 100% of the time, with an error rate of less than 1%, and submitted in a timely manner 83% of the time. Twenty-one participants were interviewed. Overall, online forms were preferred given perceived security, ease of use, and enabling provision of more accurate information. Conclusions: Use of online software is feasible, provides high quality information, and is preferred by most participants. A pen-and-paper format should be available for patients with this preference and in case of technical difficulties. PMID:27069272

High-quality III-nitride films on conductive, transparent (2̅01)-oriented β-Ga2O3 using a GaN buffer layer

PubMed Central

Muhammed, M. M.; Roldan, M. A.; Yamashita, Y.; Sahonta, S.-L.; Ajia, I. A.; Iizuka, K.; Kuramata, A.; Humphreys, C. J.; Roqan, I. S.

2016-01-01

We demonstrate the high structural and optical properties of InxGa1−xN epilayers (0 ≤ x ≤ 23) grown on conductive and transparent (01)-oriented β-Ga2O3 substrates using a low-temperature GaN buffer layer rather than AlN buffer layer, which enhances the quality and stability of the crystals compared to those grown on (100)-oriented β-Ga2O3. Raman maps show that the 2″ wafer is relaxed and uniform. Transmission electron microscopy (TEM) reveals that the dislocation density reduces considerably (~4.8 × 107 cm−2) at the grain centers. High-resolution TEM analysis demonstrates that most dislocations emerge at an angle with respect to the c-axis, whereas dislocations of the opposite phase form a loop and annihilate each other. The dislocation behavior is due to irregular (01) β-Ga2O3 surface at the interface and distorted buffer layer, followed by relaxed GaN epilayer. Photoluminescence results confirm high optical quality and time-resolved spectroscopy shows that the recombination is governed by bound excitons. We find that a low root-mean-square average (≤1.5 nm) of InxGa1−xN epilayers can be achieved with high optical quality of InxGa1−xN epilayers. We reveal that (01)-oriented β-Ga2O3 substrate has a strong potential for use in large-scale high-quality vertical light emitting device design. PMID:27412372

High-quality III-nitride films on conductive, transparent (2̅01)-oriented β-Ga2O3 using a GaN buffer layer.

PubMed

Muhammed, M M; Roldan, M A; Yamashita, Y; Sahonta, S-L; Ajia, I A; Iizuka, K; Kuramata, A; Humphreys, C J; Roqan, I S

2016-07-14

We demonstrate the high structural and optical properties of InxGa1-xN epilayers (0 ≤ x ≤ 23) grown on conductive and transparent (01)-oriented β-Ga2O3 substrates using a low-temperature GaN buffer layer rather than AlN buffer layer, which enhances the quality and stability of the crystals compared to those grown on (100)-oriented β-Ga2O3. Raman maps show that the 2″ wafer is relaxed and uniform. Transmission electron microscopy (TEM) reveals that the dislocation density reduces considerably (~4.8 × 10(7) cm(-2)) at the grain centers. High-resolution TEM analysis demonstrates that most dislocations emerge at an angle with respect to the c-axis, whereas dislocations of the opposite phase form a loop and annihilate each other. The dislocation behavior is due to irregular (01) β-Ga2O3 surface at the interface and distorted buffer layer, followed by relaxed GaN epilayer. Photoluminescence results confirm high optical quality and time-resolved spectroscopy shows that the recombination is governed by bound excitons. We find that a low root-mean-square average (≤1.5 nm) of InxGa1-xN epilayers can be achieved with high optical quality of InxGa1-xN epilayers. We reveal that (01)-oriented β-Ga2O3 substrate has a strong potential for use in large-scale high-quality vertical light emitting device design.

Quality and accuracy of electronic pre-anesthesia evaluation forms.

PubMed

Almeshari, Meshari; Khalifa, Mohamed; El-Metwally, Ashraf; Househ, Mowafa; Alanazi, Abdullah

2018-07-01

Paper-based forms have been widely used to document patient health information for anesthesia; however, hospitals are now switching to electronic patient file documentation for anesthesia. The aim of this study is to compare the quality of paper-based and electronic pre-anesthesia assessment forms. The research conducted in this study was quasi-experimental using a pretest-posttest design without a control group. The study was conducted at King Abdulaziz Medical City, Riyadh (KAMC-RD) during November 2015. Paper-based forms were converted into electronic forms, and the paper-based pre-anesthesia forms were used during the first two weeks of the data collection period while electronic forms were completed in the last two weeks. The quality of each (electronic vs. paper) was evaluated with respect to missing items, errors, and unreadable items. The sample size included all 15 anesthetists working in the pre-anesthesia clinic at KAMC-RD. The anesthetists completed 25 pre-anesthesia forms daily during a five-day week schedule. A total of 500 patient forms were completed during the study (250 paper-based and 250 electronic forms). Anesthetists' satisfaction with the electronic pre-anesthesia form was also measured using a questionnaire. The electronic form shows significantly higher quality in all assessment categories (missing items, errors, and unreadable items; X² (2, N = 500) = 171.64, p < 0.001). The satisfaction survey found 81.65% of the anesthetists were satisfied with the electronic pre-anesthesia form for all questions. Our study demonstrates that the electronic pre-anesthesia form has better data quality, meets the expectations of anesthetists and aids to decrease missing key preoperative information. This type of approach is imperative for the safety of perioperative patients. Copyright © 2018. Published by Elsevier B.V.

Earnings Quality Measures and Excess Returns

PubMed Central

Perotti, Pietro; Wagenhofer, Alfred

2014-01-01

This paper examines how commonly used earnings quality measures fulfill a key objective of financial reporting, i.e., improving decision usefulness for investors. We propose a stock-price-based measure for assessing the quality of earnings quality measures. We predict that firms with higher earnings quality will be less mispriced than other firms. Mispricing is measured by the difference of the mean absolute excess returns of portfolios formed on high and low values of a measure. We examine persistence, predictability, two measures of smoothness, abnormal accruals, accruals quality, earnings response coefficient and value relevance. For a large sample of US non-financial firms over the period 1988–2007, we show that all measures except for smoothness are negatively associated with absolute excess returns, suggesting that smoothness is generally a favorable attribute of earnings. Accruals measures generate the largest spread in absolute excess returns, followed by smoothness and market-based measures. These results lend support to the widespread use of accruals measures as overall measures of earnings quality in the literature. PMID:26300582

Earnings Quality Measures and Excess Returns.

PubMed

Perotti, Pietro; Wagenhofer, Alfred

2014-06-01

This paper examines how commonly used earnings quality measures fulfill a key objective of financial reporting, i.e., improving decision usefulness for investors. We propose a stock-price-based measure for assessing the quality of earnings quality measures. We predict that firms with higher earnings quality will be less mispriced than other firms. Mispricing is measured by the difference of the mean absolute excess returns of portfolios formed on high and low values of a measure. We examine persistence, predictability, two measures of smoothness, abnormal accruals, accruals quality, earnings response coefficient and value relevance. For a large sample of US non-financial firms over the period 1988-2007, we show that all measures except for smoothness are negatively associated with absolute excess returns, suggesting that smoothness is generally a favorable attribute of earnings. Accruals measures generate the largest spread in absolute excess returns, followed by smoothness and market-based measures. These results lend support to the widespread use of accruals measures as overall measures of earnings quality in the literature.

Improving stamping simulation accuracy by accounting for realistic friction and lubrication conditions: Application to the door-outer of the Mercedes-Benz C-class Coupé

NASA Astrophysics Data System (ADS)

Hol, J.; Wiebenga, J. H.; Stock, J.; Wied, J.; Wiegand, K.; Carleer, B.

2016-08-01

In the stamping of automotive parts, friction and lubrication play a key role in achieving high quality products. In the development process of new automotive parts, it is therefore crucial to accurately account for these effects in sheet metal forming simulations. Only then, one can obtain reliable and realistic simulation results that correspond to the actual try-out and mass production conditions. In this work, the TriboForm software is used to accurately account for tribology-, friction-, and lubrication conditions in stamping simulations. The enhanced stamping simulations are applied and validated for the door-outer of the Mercedes- Benz C-Class Coupe. The project results demonstrate the improved prediction accuracy of stamping simulations with respect to both part quality and actual stamping process conditions.

Development of LaRC 160/NR150B2 polyimide graphite hybrid composites. [for shuttle applications

NASA Technical Reports Server (NTRS)

Maximovich, M. G.; Bergren, O.; Lockerby, S.

1980-01-01

A method for co-curing NR150B2 and LaRC 160 prepregs into hybrid composites was developed. The processing characteristics and the properties of the hybrid composites were compared with those of laminates fabricated from the individual component prepregs. Resin forms were selected and optimized and a new NR150 formulation was investigated. The new formulation greatly facilitated the processing and the performance of this system. Quality control techniques were evaluated and developed, high quality laminates were fabricated from both individual resin systems, and hybrid laminates were successfully co-cured. Optimum hybrid forms were investigated and several novel approaches were explored. An optimum hybrid system was developed that utilizes a LaRC curing schedule but shows no degradation of mechanical properties after aging 500 hr in air at 260 C.

Systematic Review of the Association between Dairy Product Consumption and Risk of Cardiovascular-Related Clinical Outcomes123

PubMed Central

Drouin-Chartier, Jean-Philippe; Brassard, Didier; Tessier-Grenier, Maude; Côté, Julie Anne; Labonté, Marie-Ève; Desroches, Sophie; Couture, Patrick; Lamarche, Benoît

2016-01-01

The objective of this systematic review was to determine if dairy product consumption is detrimental, neutral, or beneficial to cardiovascular health and if the recommendation to consume reduced-fat as opposed to regular-fat dairy is evidence-based. A systematic review of meta-analyses of prospective population studies associating dairy consumption with cardiovascular disease (CVD), coronary artery disease (CAD), stroke, hypertension, metabolic syndrome (MetS), and type 2 diabetes (T2D) was conducted on the basis of the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) statement. Quality of evidence was rated by using the Grading of Recommendations Assessment, Development, and Evaluation scale. High-quality evidence supports favorable associations between total dairy intake and hypertension risk and between low-fat dairy and yogurt intake and the risk of T2D. Moderate-quality evidence suggests favorable associations between intakes of total dairy, low-fat dairy, cheese, and fermented dairy and the risk of stroke; intakes of low-fat dairy and milk and the risk of hypertension; total dairy and milk consumption and the risk of MetS; and total dairy and cheese and the risk of T2D. High- to moderate-quality evidence supports neutral associations between the consumption of total dairy, cheese, and yogurt and CVD risk; the consumption of any form of dairy, except for fermented, and CAD risk; the consumption of regular- and high-fat dairy, milk, and yogurt and stroke risk; the consumption of regular- and high-fat dairy, cheese, yogurt, and fermented dairy and hypertension risk; and the consumption of regular- and high-fat dairy, milk, and fermented dairy and T2D risk. Data from this systematic review indicate that the consumption of various forms of dairy products shows either favorable or neutral associations with cardiovascular-related clinical outcomes. The review also emphasizes that further research is urgently needed to compare the impact of low-fat with regular- and high-fat dairy on cardiovascular-related clinical outcomes in light of current recommendations to consume low-fat dairy. PMID:28140321

Systematic Review of the Association between Dairy Product Consumption and Risk of Cardiovascular-Related Clinical Outcomes.

PubMed

Drouin-Chartier, Jean-Philippe; Brassard, Didier; Tessier-Grenier, Maude; Côté, Julie Anne; Labonté, Marie-Ève; Desroches, Sophie; Couture, Patrick; Lamarche, Benoît

2016-11-01

The objective of this systematic review was to determine if dairy product consumption is detrimental, neutral, or beneficial to cardiovascular health and if the recommendation to consume reduced-fat as opposed to regular-fat dairy is evidence-based. A systematic review of meta-analyses of prospective population studies associating dairy consumption with cardiovascular disease (CVD), coronary artery disease (CAD), stroke, hypertension, metabolic syndrome (MetS), and type 2 diabetes (T2D) was conducted on the basis of the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) statement. Quality of evidence was rated by using the Grading of Recommendations Assessment, Development, and Evaluation scale. High-quality evidence supports favorable associations between total dairy intake and hypertension risk and between low-fat dairy and yogurt intake and the risk of T2D. Moderate-quality evidence suggests favorable associations between intakes of total dairy, low-fat dairy, cheese, and fermented dairy and the risk of stroke; intakes of low-fat dairy and milk and the risk of hypertension; total dairy and milk consumption and the risk of MetS; and total dairy and cheese and the risk of T2D. High- to moderate-quality evidence supports neutral associations between the consumption of total dairy, cheese, and yogurt and CVD risk; the consumption of any form of dairy, except for fermented, and CAD risk; the consumption of regular- and high-fat dairy, milk, and yogurt and stroke risk; the consumption of regular- and high-fat dairy, cheese, yogurt, and fermented dairy and hypertension risk; and the consumption of regular- and high-fat dairy, milk, and fermented dairy and T2D risk. Data from this systematic review indicate that the consumption of various forms of dairy products shows either favorable or neutral associations with cardiovascular-related clinical outcomes. The review also emphasizes that further research is urgently needed to compare the impact of low-fat with regular- and high-fat dairy on cardiovascular-related clinical outcomes in light of current recommendations to consume low-fat dairy. © 2016 American Society for Nutrition.

[Current situations and problem analysis of influencing factors of traditional Chinese medicine tablets on forming quality].

PubMed

Li, Yan-Nian; Wu, Zhen-Feng; Wan, Na; Li, Yuan-Hui; Li, Hui-Ting; Yang, Ming

2018-04-01

The compressibility of tablets is the essential operating unit during the preparation of traditional Chinese medicine tablets, as well as a complicated process. Therefore, it is of great significance to comprehensively study the influencing factors on the formation process. This paper aimed to review the evaluation methods for the tablet forming quality and highlight the effects of material powder properties, excipients and preparation technology on the quality of traditional Chinese medicine tablets on the basis of relevant literatures. Furthermore, the common problems in tablet forming process are also analyzed to provide useful references for the development of tablet forming quality of traditional Chinese medicines. Copyright© by the Chinese Pharmaceutical Association.

How Implementation of TQM and the Development of a Process Improvement Model, Within a Forward Support Battalion, Can Improve Preparation of the Material Condition Status Report (DA Form 2406)

DTIC Science & Technology

1990-12-01

studies for the continuing education of managers new to the TQM approach , for informing vendors of their responsibilities under a changed process, and...Department of Defense (DoD) is adopting a management approach known as Total Quality Management (TQM) in an effort to improve quality and productivity...individuals selected be highly knowledgeable about the operations in their shop or unit. The main function of PATs is to collect and summarize process data for

Prototyping of Dental Structures Using Laser Milling

NASA Astrophysics Data System (ADS)

Andreev, A. O.; Kosenko, M. S.; Petrovskiy, V. N.; Mironov, V. D.

2016-02-01

The results of experimental studies of the effect of an ytterbium fiber laser radiation parameters on processing efficiency and quality of ZrO2 ceramics widely used in stomatology are presented. Laser operating conditions with optimum characteristics for obtaining high quality final surfaces and rapid material removal of dental structures are determined. The ability of forming thin-walled ceramic structures by laser milling technology (a minimum wall thickness of 50 μm) is demonstrated. The examples of three-dimensional dental structures created in computer 3D-models of human teeth using laser milling are shown.

Standard classification of software documentation

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1976-01-01

General conceptual requirements for standard levels of documentation and for application of these requirements to intended usages. These standards encourage the policy to produce only those forms of documentation that are needed and adequate for the purpose. Documentation standards are defined with respect to detail and format quality. Classes A through D range, in order, from the most definitive down to the least definitive, and categories 1 through 4 range, in order, from high-quality typeset down to handwritten material. Criteria for each of the classes and categories, as well as suggested selection guidelines for each are given.

The Laser Atmospheric Wind Sounder (LAWS) Phase 2 Preliminary Laser Design

NASA Technical Reports Server (NTRS)

Lawrence, T. Rhidian; Pindroh, Albert L.; Bowers, Mark S.; Dehart, Terence E.; Mcdonald, Kenneth F.; Cousins, Ananda; Moody, Stephen E.

1992-01-01

The requirements for the Laser Atmospheric Wind Sounder (LAWS) were determined from system considerations and are summarized in tabular form. The laser subsystem provides for the generation and frequency control of two beams, the transmit high power and local oscillator beams, which are delivered to the optical and receiver subsystems, respectively. In our baseline approach, the excitation of the gain section is achieved by a self-sustaining uv-(corona) preionized discharge. Gas is recirculated within the laser loop using a transverse flow fan. An intra-flow-loop heat exchanger, catalyst monolith, and acoustic attenuators condition the gas to ensure uniform energy output and high beam quality during high pulse repetition rate operation. The baseline LAWS laser pulse temporal profile as calculated by in-house laser codes is given in graphical form.

Association between stigma, depression and quality of life of people living with HIV/AIDS (PLHA) in South India - a community based cross sectional study.

PubMed

Charles, Bimal; Jeyaseelan, Lakshmanan; Pandian, Arvind Kumar; Sam, Asirvatham Edwin; Thenmozhi, Mani; Jayaseelan, Visalakshi

2012-06-21

India has around 2.27 million adults living with HIV/AIDS who face several challenges in the medical management of their disease. Stigma, discrimination and psychosocial issues are prevalent. The objective of the study was to determine the prevalence of severe stigma and to study the association between this, depression and the quality of life (QOL) of people living with HIV/AIDS (PLHA) in Tamil Nadu. This was a community based cross sectional study carried out in seven districts of Tamil Nadu, India, among 400 PLHA in the year 2009. The following scales were used for stigma, depression and quality of life, Berger scale, Major Depression Inventory (MDI) scale and the WHO BREF scale. Both Stigma and QOL were classified as none, moderate or severe/poor based on the tertile cut off values of the scale scores. Depression was classified as none, mild, moderate and severe. Logistic regression analyses were performed to study the risk factors. Twenty seven per cent of PLHA had experienced severe forms of stigma. These were severe forms of personalized stigma (28.8%), negative self-image (30.3%), perceived public attitude (18.2%) and disclosure concerns (26%). PLHA experiencing severe depression were 12% and those experiencing poor quality of life were 34%. Poor QOL reported in the physical, psychological, social and environmental domains was 42.5%, 40%, 51.2% and 34% respectively. PLHA who had severe personalized stigma and negative self-image had 3.4 (1.6-7.0) and 2.1 (1.0-4.1) times higher risk of severe depression respectively (p < .001). PLHA who had severe depression had experienced 2.7(1.1-7.7) times significantly poorer QOL. Severe forms of stigma were equivalently prevalent among all the categories of PLHA. However, PLHA who had experienced severe depression had only developed poor QOL. A high level of social support was associated with a high level of QOL.

Shape-Controlled Synthesis of High-Quality Cu7 S4 Nanocrystals for Efficient Light-Induced Water Evaporation.

PubMed

Zhang, Changbo; Yan, Cong; Xue, Zhenjie; Yu, Wei; Xie, Yinde; Wang, Tie

2016-10-01

Copper sulfides (Cu 2-x S), are a novel kind of photothermal material exhibiting significant photothermal conversion efficiency, making them very attractive in various energy conversion related devices. Preparing high quality uniform Cu 2-x S nanocrystals (NCs) is a top priority for further energy-and sustainability relevant nanodevices. Here, a shape-controlled high quality Cu 7 S 4 NCs synthesis strategy is reported using sulfur in 1-octadecene as precursor by varying the heating temperature, as well as its forming mechanism. The performance of the Cu 7 S 4 NCs is further explored for light-driven water evaporation without the need of heating the bulk liquid to the boiling point, and the results suggest that as-synthesized highly monodisperse NCs perform higher evaporation rate than polydisperse NCs under the identical morphology. Furthermore, disk-like NCs exhibit higher water evaporation rate than spherical NCs. The water evaporation rate can be further enhanced by assembling the organic phase Cu 7 S 4 NCs into a dense film on the aqueous solution surface. The maximum photothermal conversion efficiency is as high as 77.1%. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Issues in School Finance/A Texas Primer.

ERIC Educational Resources Information Center

Hooker, Richard L.

This booklet attempts to provide the layman with information on the need to equalize educational opportunities and taxpayer burdens in a high quality State system of public schools for Texas. The publication attempts to stimulate discussion and provide a foundation, in the briefest form, for the consideration of Texas school finance issues.…

The sheep genome illuminates biology of the rumen and lipid metabolism

USDA-ARS?s Scientific Manuscript database

Sheep (Ovis aries) are a major source of meat, milk, and fiber in the form of wool and represent a distinct class of animals that have a specialized digestive organ, the rumen, that carries out the initial digestion of plant material. We have developed and analyzed a high-quality reference sheep gen...

Trustees: Allies in Academic Integrity

ERIC Educational Resources Information Center

Martin, Jerry L.

2003-01-01

According to this author, it may not be the first instinct of the typical professor to ask trustees to become involved in issues of academic quality. Most professors' instincts were formed in a different time and they may have forgotten how much the academic world has changed. Professors used to defend high academic standards, the liberal arts,…

Solar thermal parabolic dish energy applications

NASA Technical Reports Server (NTRS)

Pijawka, W.

1981-01-01

Vu-graphs are presented that show that applications are a viable distributed renewable power generation option. Quality energy can be produced in the form of electricity and high temperature heat. Modular systems are described that can be distributed to new or existing plants and that are mass producible with the associated economies of production.

Speckle imaging techniques of the turbulence degraded images

NASA Astrophysics Data System (ADS)

Liu, Jin; Huang, Zongfu; Mao, Hongjun; Liang, Yonghui

2018-03-01

We propose a speckle imaging algorithm in which we use the improved form of spectral ratio to obtain the Fried parameter, we also use a filter to reduce the high frequency noise effects. Our algorithm makes an improvement in the quality of the reconstructed images. The performance is illustrated by computer simulations.

Quality Professional Development for Secondary Science Teachers

ERIC Educational Resources Information Center

Mchazlett, Dwight Henry, Jr.

2015-01-01

This record of study (ROS) explores the perceptions of three high school biology teachers who implemented a form of the Japanese originated Lesson Study Professional Development (LS PD) model. Additionally, this ROS reports on the perceptions of the internal stakeholders with regard to the model's viability as a potential solution to a proposed…

Mastering Academic Language: Organization and Stance in the Persuasive Writing of High School Students

ERIC Educational Resources Information Center

Uccelli, Paola; Dobbs, Christina L.; Scott, Jessica

2013-01-01

Beyond mechanics and spelling conventions, academic writing requires progressive mastery of advanced language forms and functions. Pedagogically useful tools to assess such language features in adolescents' writing, however, are not yet available. This study examines language predictors of writing quality in 51 persuasive essays produced by high…

Contracting AFSC 651X0, AFPT 90-651-862

DTIC Science & Technology

1991-10-01

CONTRACTING 78 TABLE 30 TECHNICAL TASKS NOT REFERENCED TO STS HIGH IN TRAINING EMPHASIS (TE) RATINGS TE TASKS RATING N1000 PREPARE DD FORMS 1784 5.08 M739 ...requirements with contractors or customers 89 M739 Compare contractor invoices with QAE reports 89 M731 Analyze adequacy of corrective actions to quality

Relation between Metacognitive Awareness and Participation to Class Discussion of University Students

ERIC Educational Resources Information Center

Akman, Özkan; Alagöz, Bülent

2018-01-01

Form of inquiry should be based on cognitive approach, student-centered, question and inquiry-based, free of memorization and focused on high-level cognitive skills (critical-creative thinking and problem-solving) rather than conventional teacher-centered teaching and learning based on memorization and behavioral approach. The life quality of…

Development of Creative Potential of Cinema Tourism

ERIC Educational Resources Information Center

Dzhandzhugazova, Elena A.; Ilinaa, Elena L.; Latkin, Aleksander N.; Koshelevava, Anna I.

2016-01-01

The relevance of the problem indicated in the article is caused by the fact that under current conditions it is necessary to offer high-quality and demanded tourist products, formed at the combination of various industries on the basis of wide application of creative potential of different industries, including tourism and cinema, a harmonious…

Impact of curd milling on the quality traits of starter-free pasteurized Queso Fresco

USDA-ARS?s Scientific Manuscript database

Manufacture of Queso Fresco (QF), a high moisture fresh Hispanic-style cheese that is very popular in the Americas, varies from country to country with many manufacturers fine milling the curd prior to forming the cheese block to ensure its crumbly nature. As this traditional step increases the ris...

Storymakers: Hopa Mountain's Early Literacy Program

ERIC Educational Resources Information Center

Templin, Patricia A.

2013-01-01

Hopa Mountain's StoryMakers program is an innovative, research-based program for donating high quality young children's books to parents. Hopa Mountain is a nonprofit organization based in Bozeman, Montana. Hopa Mountain works with groups of rural and tribal citizen leaders who form StoryMakers Community Teams to talk one-on-one with local parents…

Education and Family in Conflict

ERIC Educational Resources Information Center

Lee, Jihye

2011-01-01

In recent years, the demands of high-quality education have become a source of problems in South Korea, forming a new type of separated family. When the parents send their children to foreign countries for advanced education, the fathers, the wives, and children are separated for a significantly long period of time. Usually, the fathers, called…

Selective nanoscale growth of lattice mismatched materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Seung-Chang; Brueck, Steven R. J.

Exemplary embodiments provide materials and methods of forming high-quality semiconductor devices using lattice-mismatched materials. In one embodiment, a composite film including one or more substantially-single-particle-thick nanoparticle layers can be deposited over a substrate as a nanoscale selective growth mask for epitaxially growing lattice-mismatched materials over the substrate.

Draft Genome sequence of Frankia sp. Strain QA3, a nitrogen-fixing actinobacterium isolated from the root nodule of Alnus nitida

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sen, Arnab; Beauchemin, Nicholas; Bruce, David

Members of actinomycete genus Frankia form a nitrogen-fixing symbiosis with 8 different families of actinorhizal plants. We report a high-quality draft genome sequence for Frankia sp. stain QA3, a nitrogen-fixing actinobacterium isolated from root nodules of Alnus nitida.

Sugar yield and composition of tubers from Jerusalem Artichoke (Helianthus tuberosus) irrigated with saline waters

USDA-ARS?s Scientific Manuscript database

Currently, major biofuel crops are also food crops that demand fertile soils and good-quality water. Jerusalem artichoke (Helianthus tuberosus, Asteraceae) produces high tonnage of tubers that are rich in sugars, mainly in the form of inulin. In this study, plants of the cultivar “White Fuseau” grow...

Optimizing Mothers' Social Networks: Information-Sharing Strategies

ERIC Educational Resources Information Center

Lashley, Cynthia O'Nell

2010-01-01

Finding high-quality infant care continues to be challenging for many families. Such challenges are even greater for single mothers with limited resources and English language skills. Several years ago, this challenge formed the basis for an urban, center-based program called the Pregnant-Mothers Support Group (PSG). The PSG served single,…

Community Schools: Improving Student Learning/Strengthening Schools, Families, and Communities. A Handbook for State Policy Leaders.

ERIC Educational Resources Information Center

Coalition for Community Schools, Washington, DC.

This handbook is designed to help state leaders form vital connections between schools and communities to improve student learning. It explains that community schools are beneficial because they meet students' basic needs, including safety; offer high quality curriculum and teaching aligned with academic standards; provide learning experiences…

Metabolomic Analysis and Visualization Engine for LC–MS Data

PubMed Central

Melamud, Eugene; Vastag, Livia; Rabinowitz, Joshua D.

2017-01-01

Metabolomic analysis by liquid chromatography–high-resolution mass spectrometry results in data sets with thousands of features arising from metabolites, fragments, isotopes, and adducts. Here we describe a software package, Metabolomic Analysis and Visualization ENgine (MAVEN), designed for efficient interactive analysis of LC–MS data, including in the presence of isotope labeling. The software contains tools for all aspects of the data analysis process, from feature extraction to pathway-based graphical data display. To facilitate data validation, a machine learning algorithm automatically assesses peak quality. Users interact with raw data primarily in the form of extracted ion chromatograms, which are displayed with overlaid circles indicating peak quality, and bar graphs of peak intensities for both unlabeled and isotope-labeled metabolite forms. Click-based navigation leads to additional information, such as raw data for specific isotopic forms or for metabolites changing significantly between conditions. Fast data processing algorithms result in nearly delay-free browsing. Drop-down menus provide tools for the overlay of data onto pathway maps. These tools enable animating series of pathway graphs, e.g., to show propagation of labeled forms through a metabolic network. MAVEN is released under an open source license at http://maven.princeton.edu. PMID:21049934

Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

NASA Astrophysics Data System (ADS)

Vollmer, R.; Palm, C.

2017-09-01

The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

What can vortices tell us about vocal fold vibration and voice production.

PubMed

Khosla, Sid; Murugappan, Shanmugam; Gutmark, Ephraim

2008-06-01

Much clinical research on laryngeal airflow has assumed that airflow is unidirectional. This review will summarize what additional knowledge can be obtained about vocal fold vibration and voice production by studying rotational motion, or vortices, in laryngeal airflow. Recent work suggests two types of vortices that may strongly contribute to voice quality. The first kind forms just above the vocal folds during glottal closing, and is formed by flow separation in the glottis; these flow separation vortices significantly contribute to rapid closing of the glottis, and hence, to producing loudness and high frequency harmonics in the acoustic spectrum. The second is a group of highly three-dimensional and coherent supraglottal vortices, which can produce sound by interaction with structures in the vocal tract. Present work is also described that suggests that certain laryngeal pathologies, such as asymmetric vocal fold tension, will significantly modify both types of vortices, with adverse impact on sound production: decreased rate of glottal closure, increased broadband noise, and a decreased signal to noise ratio. Recent research supports the hypothesis that glottal airflow contains certain vortical structures that significantly contribute to voice quality.

Computer-generated holograms and diffraction gratings in optical security applications

NASA Astrophysics Data System (ADS)

Stepien, Pawel J.

2000-04-01

The term 'computer generated hologram' (CGH) describes a diffractive structure strictly calculated and recorded to diffract light in a desired way. The CGH surface profile is a result of the wavefront calculation rather than of interference. CGHs are able to form 2D and 3D images. Optically, variable devices (OVDs) composed of diffractive gratings are often used in security applications. There are various types of optically and digitally recorded gratings in security applications. Grating based OVDs are used to record bright 2D images with limited range of cinematic effects. These effects result form various orientations or densities of recorded gratings. It is difficult to record high quality OVDs of 3D objects using gratings. Stereo grams and analogue rainbow holograms offer 3D imaging, but they are darker and have lower resolution than grating OVDs. CGH based OVDs contains unlimited range of cinematic effects and high quality 3D images. Images recorded using CGHs are usually more noisy than grating based OVDs, because of numerical inaccuracies in CGH calculation and mastering. CGH based OVDs enable smooth integration of hidden and machine- readable features within an OVD design.

Feasibility and effects of TAI CHI for the promotion of sleep quality and quality of life: a single-group study in a sample of older Chinese individuals in Hong Kong.

PubMed

Lo, Catherine Mei-Han; Lee, Paul H

2014-03-01

Poor sleep in later life is a global issue that reduces many individuals' quality of life (QOL). The purpose of this pilot study was to test the feasibility and effects of a simplified tai chi exercise intervention on sleep quality and QOL among Chinese community-dwelling older adults with poor sleep quality. This single-group, descriptive feasibility study included 34 individuals with poor sleep quality who agreed to participate in a 12-week tai chi intervention. Twenty-six individuals completed the program (23.5% dropout rate). Older adults with poor sleep quality who completed the intervention showed significant improvement in the Medical Outcomes Study Short Form-36 mental component and the Pittsburgh Sleep Quality Index global and component scores. The low recruitment and attendance and high dropout rates might be associated with participants' age, gender, and sleep quality. Further long-term studies are required to examine the potential effects of the tai chi intervention. [Journal of Gerontological Nursing, 40(3), 46-52.]. Copyright 2014, SLACK Incorporated.

Automatic retinal interest evaluation system (ARIES).

PubMed

Yin, Fengshou; Wong, Damon Wing Kee; Yow, Ai Ping; Lee, Beng Hai; Quan, Ying; Zhang, Zhuo; Gopalakrishnan, Kavitha; Li, Ruoying; Liu, Jiang

2014-01-01

In recent years, there has been increasing interest in the use of automatic computer-based systems for the detection of eye diseases such as glaucoma, age-related macular degeneration and diabetic retinopathy. However, in practice, retinal image quality is a big concern as automatic systems without consideration of degraded image quality will likely generate unreliable results. In this paper, an automatic retinal image quality assessment system (ARIES) is introduced to assess both image quality of the whole image and focal regions of interest. ARIES achieves 99.54% accuracy in distinguishing fundus images from other types of images through a retinal image identification step in a dataset of 35342 images. The system employs high level image quality measures (HIQM) to perform image quality assessment, and achieves areas under curve (AUCs) of 0.958 and 0.987 for whole image and optic disk region respectively in a testing dataset of 370 images. ARIES acts as a form of automatic quality control which ensures good quality images are used for processing, and can also be used to alert operators of poor quality images at the time of acquisition.

Sexual satisfaction, anxiety, depression and quality of life among Turkish colorectal cancer patients [Izmir Oncology Group (IZOG) study].

PubMed

Akyol, Murat; Ulger, Eda; Alacacioglu, Ahmet; Kucukzeybek, Yuksel; Yildiz, Yasar; Bayoglu, Vedat; Gumus, Zehra; Yildiz, Ibrahim; Salman, Tarık; Varol, Umut; Ayakdas, Semra; Tarhan, Mustafa Oktay

2015-07-01

Determination of psychological problems will shed light on the terms of solution and provide support to patients about these problems will ensure the patients' coherence to the treatment and will enhance the benefits they receive from treatment. In this study, we aimed to determine these psychosocial problems and the interactions with each other in colon cancer patients. In this study, 105 patients with colorectal cancer were included. The forms consist of sociodemographic features, Hospital Anxiety and Depression Scale, European Organization for Research on Treatment of Cancer Questionnaires Quality of Life-C30 and Golombok-Rust Inventory of Sexual Satisfaction questionnaires. Male patients had significantly higher European Organization for Research on Treatment of Cancer Questionnaires Quality of Life-C30 function scales and global quality-of-life scores than female patients. Golombok-Rust Inventory of Sexual Satisfaction scores of female patients were significantly higher than that of male patients. European Organization for Research on Treatment of Cancer Questionnaires Quality of Life-C30 function scales and global quality-of-life scores of the patients with high depression scores were significantly lower, conversely symptom scale scores of the patients with high depression scores were significantly higher than that of the patients with low depression scores. Patients with low anxiety scores had significantly higher European Organization for Research on Treatment of Cancer Questionnaires Quality of Life-C30 function scales and global quality-of-life scores than the patients with high anxiety scores. Symptom scale scores of the patients with high anxiety scores were significantly higher than that of the patients with low anxiety scores. The scores of Golombok-Rust Inventory of Sexual Satisfaction except premature ejaculation and vaginismus were significantly higher in patients with high anxiety scores and a significant difference was determined in touch, avoidance and anorgasm. This study demonstrates that there is a significant association with anxiety/depression symptoms and quality-of-life scores, sexual dysfunction. Sexual dysfunction is significantly more common in patients with high anxiety and depression scores. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Growing Gallium Arsenide On Silicon

NASA Technical Reports Server (NTRS)

Radhakrishnan, Gouri

1989-01-01

Epitaxial layers of high quality formed on <111> crystal plane. Present work reports successful growth of 1- and 2-micrometer thick layers of n-type, 7-ohms per cm, 2-inch diameter, Si<111> substrate. Growth conducted in Riber-2300(R) MBE system. Both doped and undoped layers of GaAs grown. Chamber equipped with electron gun and camera for in-situ reflection high-energy-electron diffraction measurements. RHEED patterns of surface monitored continuously during slow growth stage.

Study of tissue engineered bone nodules by Fourier transform infrared spectroscopy.

PubMed

Aydin, Halil Murat; Hu, Bin; Suso, Josep Sulé; El Haj, Alicia; Yang, Ying

2011-02-21

The key criteria for assessing the success of bone tissue engineering are the quality and quantity of the produced minerals within the cultured constructs. The accumulation of calcium ions and inorganic phosphates in culture medium serves as nucleating agents for the formation of hydroxyapatite, which is the main inorganic component of bone. Bone nodule formation is one of the hallmarks of mineralization in such cell cultures. In this study, we developed a new two-step procedure to accelerate bone formation in which mouse bone cell aggregates were produced first on various chemically treated non-adhesive substrates. After this step, the bone cells' growth and mineralization were followed in conventional culture plates. The number and size of cell aggregates were studied with light microscopy. The minerals' formation in the form of nodules produced by the cell aggregates and the bone crystal quality were studied with Fourier Transform Infrared (FTIR) spectroscopy. The FTIR spectra of the ash specimens (mineral phase only) from thermal gravimetric analysis (TGA) provided valuable information of the quality of the minerals. The υ(4) PO(4) region (550-650 cm(-1)), which reveals apatitic and non-apatitic HPO(4) or PO(4) environments, and phosphate region (910-1180 cm(-1)) were examined for the minerals produced in the form of nodules. The peak position and intensity of the spectra demonstrate that the quality of the bone produced by cell aggregates, especially from the bigger ones, which were formed on Plunoric treated substrates, exhibit a composition more similar to that of native bone. This work establishes a new protocol for high quality bone formation and characterization, with the potential to be applied to bone tissue engineering.

In silico carbon molecular beam epitaxial growth of graphene on the h-BN substrate: carbon source effect on van der Waals epitaxy

NASA Astrophysics Data System (ADS)

Lee, Jonghoon; Varshney, Vikas; Park, Jeongho; Farmer, Barry L.; Roy, Ajit K.

2016-05-01

Against the presumption that hexagonal boron-nitride (h-BN) should provide an ideal substrate for van der Waals (vdW) epitaxy to grow high quality graphene films, carbon molecular beam epitaxy (CMBE) techniques using solid carbon sublimation have reported relatively poor quality of the graphene. In this article, the CMBE growth of graphene on the h-BN substrate is numerically studied in order to identify the effect of the carbon source on the quality of the graphene film. The carbon molecular beam generated by the sublimation of solid carbon source materials such as graphite and glassy carbon is mostly composed of atomic carbon, carbon dimers and carbon trimers. Therefore, the graphene film growth becomes a complex process involving various deposition characteristics of a multitude of carbon entities. Based on the study of surface adsorption and film growth characteristics of these three major carbon entities comprising graphite vapour, we report that carbon trimers convey strong traits of vdW epitaxy prone to high quality graphene growth, while atomic carbon deposition is a surface-reaction limited process accompanied by strong chemisorption. The vdW epitaxial behaviour of carbon trimers is found to be substantial enough to nucleate and develop into graphene like planar films within a nanosecond of high flux growth simulation, while reactive atomic carbons tend to impair the structural integrity of the crystalline h-BN substrate upon deposition to form an amorphous interface between the substrate and the growing carbon film. The content of reactive atomic carbons in the molecular beam is suspected to be the primary cause of low quality graphene reported in the literature. A possible optimization of the molecular beam composition towards the synthesis of better quality graphene films is suggested.Against the presumption that hexagonal boron-nitride (h-BN) should provide an ideal substrate for van der Waals (vdW) epitaxy to grow high quality graphene films, carbon molecular beam epitaxy (CMBE) techniques using solid carbon sublimation have reported relatively poor quality of the graphene. In this article, the CMBE growth of graphene on the h-BN substrate is numerically studied in order to identify the effect of the carbon source on the quality of the graphene film. The carbon molecular beam generated by the sublimation of solid carbon source materials such as graphite and glassy carbon is mostly composed of atomic carbon, carbon dimers and carbon trimers. Therefore, the graphene film growth becomes a complex process involving various deposition characteristics of a multitude of carbon entities. Based on the study of surface adsorption and film growth characteristics of these three major carbon entities comprising graphite vapour, we report that carbon trimers convey strong traits of vdW epitaxy prone to high quality graphene growth, while atomic carbon deposition is a surface-reaction limited process accompanied by strong chemisorption. The vdW epitaxial behaviour of carbon trimers is found to be substantial enough to nucleate and develop into graphene like planar films within a nanosecond of high flux growth simulation, while reactive atomic carbons tend to impair the structural integrity of the crystalline h-BN substrate upon deposition to form an amorphous interface between the substrate and the growing carbon film. The content of reactive atomic carbons in the molecular beam is suspected to be the primary cause of low quality graphene reported in the literature. A possible optimization of the molecular beam composition towards the synthesis of better quality graphene films is suggested. Electronic supplementary information (ESI) available: Three movie files: 3mer-physorption.mpg and 3mer-chemisorption.mpg feature examples of the adsorption state sampling of a carbon trimer on the heated h-BN substrate as mentioned in the ``Single Molecule Adsorption Study'' section. In 3mer-film-growth.mpg, an instance of honey comb formation during the initial phase of graphene growth simulation using a carbon trimer beam is captured. An initially sp hybridized carbon atom (red colored) becomes sp2 hybridized as a result of additional covalent bonding with the impinging carbon trimer. As the bond angle around the red carbon changes from 180 degree (sp) to 120 degree (sp2), nearby carbon atoms enclose to form a hexagon structure composed of 6 carbon atoms. See DOI: 10.1039/c6nr01396a

Risk factors for neck and upper extremity disorders among computers users and the effect of interventions: an overview of systematic reviews.

PubMed

Andersen, Johan H; Fallentin, Nils; Thomsen, Jane F; Mikkelsen, Sigurd

2011-05-12

To summarize systematic reviews that 1) assessed the evidence for causal relationships between computer work and the occurrence of carpal tunnel syndrome (CTS) or upper extremity musculoskeletal disorders (UEMSDs), or 2) reported on intervention studies among computer users/or office workers. PubMed, Embase, CINAHL and Web of Science were searched for reviews published between 1999 and 2010. Additional publications were provided by content area experts. The primary author extracted all data using a purpose-built form, while two of the authors evaluated the quality of the reviews using recommended standard criteria from AMSTAR; disagreements were resolved by discussion. The quality of evidence syntheses in the included reviews was assessed qualitatively for each outcome and for the interventions. Altogether, 1,349 review titles were identified, 47 reviews were retrieved for full text relevance assessment, and 17 reviews were finally included as being relevant and of sufficient quality. The degrees of focus and rigorousness of these 17 reviews were highly variable. Three reviews on risk factors for carpal tunnel syndrome were rated moderate to high quality, 8 reviews on risk factors for UEMSDs ranged from low to moderate/high quality, and 6 reviews on intervention studies were of moderate to high quality. The quality of the evidence for computer use as a risk factor for CTS was insufficient, while the evidence for computer use and UEMSDs was moderate regarding pain complaints and limited for specific musculoskeletal disorders. From the reviews on intervention studies no strong evidence based recommendations could be given. Computer use is associated with pain complaints, but it is still not very clear if this association is causal. The evidence for specific disorders or diseases is limited. No effective interventions have yet been documented.

Trace elements in Gem-Quality Diamonds - Origin and evolution of diamond-forming fluid inclusions

NASA Astrophysics Data System (ADS)

Pearson, Graham; Krebs, Mandy; Stachel, Thomas; Woodland, Sarah; Chinn, Ingrid; Kong, Julie

2017-04-01

In the same way that melt inclusions in phenocrysts have expanded our idea of melt formation and evolution in basalts, studying fluids trapped in diamonds is providing important new constraints on the nature of diamond-forming fluids. Fibrous and cloudy diamonds trap a high but variable density of fluid inclusions and so have been extensively studied using major and trace element compositions. In contrast, constraining the nature of the diamond-forming fluid for high purity gem-quality diamonds has been restricted by the rarity of available high quality trace element data. This is due to the extremely low concentrations of impurities that gem diamonds contain - often in the ppt range. The recent discovery of fluids in gem diamonds showing similar major element chemistry to fluid-rich diamonds suggest that many diamonds may share a common spectrum of parental fluids. Here we test this idea further. Recent advances in analytical techniques, in particular the development of the "off-line" laser ablation pre-concentration approach, have allowed fully quantitative trace element data to be recovered from "fluid-poor", high quality gem diamonds. We present trace element data for gem diamonds from a variety of locations from Canada, S. Africa and Russia, containing either silicate or sulphide inclusions to examine possible paragenetic or genetic differences between fluids. REE abundance in the "gem" diamonds vary from 0.1 to 0.0001 x chondrite. To a first order, we observe the same spectrum of trace element compositions in the gem diamonds as that seen in fluid-rich "fibrous" diamonds, supporting a common origin for the fluids. REE patterns range from extremely flat (Ce/Yb)n 2.5 to 5 (commonly in sulphide-bearing diamonds) to >70, the latter having significantly greater inter-element HFSE/LILE fractionation. In general, the fluids from the sulphide-bearing diamonds are less REE-enriched than the silicate-bearing diamonds, but the ranges overlap significantly. The very large range in REE fractionation mimics very closely that produced in high pressure (5-6 GPa) experimental melts of CO2-H2O fluxed peridotite. Hence, the elemental characteristics of the fluids could be reconciled by the diamonds growing from such melts over a range of T and hence F, with the sulphide-bearing diamonds generally being produced by larger fraction (higher T) melts that have reacted less with their wall rocks. It is also possible that the less REE enriched fluids are consistent with derivation from more reduced CH4-bearing fluids that have lower solute capacity than oxidised fluids. This option is being evaluated.

Assessment of indigenous Nepalese soybean as a potential germplasm resource for improvement of protein in North American cultivars.

PubMed

Krishnan, Hari B; Natarajan, Savithiry S; Mahmoud, Ahmed A; Bennett, John O; Krishnan, Ammulu Hari; Prasad, Braj Nandan

2006-07-26

Soybeans contain approximately 40% protein and 20% oil and represents an important source of protein in animal rations and human diets. Attempts are being made to increase further the overall protein content of soybeans by utilization of exotic germplasms. In this study, soybean cultivars from Nepal have been characterized and their potential as a germplasm resource for improvement of the protein content and quality of North American cultivars assessed. Soybean cultivars 'Sathia', 'Seti', 'Kavre', and 'Soida Chiny', indigenous to various regions of Nepal, contained 42-45% protein, which is significantly higher in comparison to that of the North American cultivar 'Williams 82' (39%). Fractionation of seed protein by high-resolution two-dimensional gel electrophoresis revealed differences in the protein profiles of these cultivars. Various isoelectric forms of glycinin and beta-conglycinin were identified by comparing the matrix-assisted laser desorption ionization time-of-flight mass fingerprinting data against the National Center for Biotechnology Information nonredundant database. Nepalese cultivar Sathia was distinct, lacking some isoelectric forms of acidic and basic glycinin subunits while expressing other unique forms. The contribution of these unique protein spots present in either Sathia or Williams 82 to the total protein content was quantified using scanning laser densitometry. Distinct restriction fragment length polymorphisms (RFLP) for group 1 glycinin genes were observed among the tested Nepalese genotypes, indicating sequence variation among the cultivars. Conversely, evaluation of RFLP for the genes encoding group 2 glycinins, beta-conglycinin, and Bowman-Birk proteinase inhibitors indicated a high degree of conservation in these genes. Determination of amino acid composition, a reflection of protein quality, indicated that the arginine content of the Nepalese soybeans ranged from 7.7 to 8.1%, which was 5-10% higher than the 7.4% expressed in Williams 82. Additionally, Karve and Seti contained significantly more cysteine than Williams 82. Nepalese high-protein soybeans having a desirable amino acid composition hold potential to increase the protein quality and diversity of North American cultivars.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ohashi, Haruhiko, E-mail: hohashi@spring8.or.jp; Senba, Yasunori; Yumoto, Hirokatsu

We studied typical forms of contamination on X-ray mirrors that cause degradation of beam quality, investigated techniques to remove the contaminants, and propose methods to eliminate the sources of the contamination. The total amount of carbon-containing substances on various materials in the vicinity of a mirror was measured by thermal desorption-gas chromatography/mass spectrometry and thermal desorption spectroscopy. It was found that cleanliness and ultra-high vacuum techniques are required to produce the contamination-free surfaces that are essential for the propagation of high-quality X-ray beams. The reduction of carbonaceous residue adsorbed on the surfaces, and absorbed into the bulk, of the materialsmore » in the vicinity of the mirrors is a key step toward achieving contamination-free X-ray optics.« less

User manual for two simple postscript output FORTRAN plotting routines

NASA Technical Reports Server (NTRS)

Nguyen, T. X.

1991-01-01

Graphics is one of the important tools in engineering analysis and design. However, plotting routines that generate output on high quality laser printers normally come in graphics packages, which tend to be expensive and system dependent. These factors become important for small computer systems or desktop computers, especially when only some form of a simple plotting routine is sufficient. With the Postscript language becoming popular, there are more and more Postscript laser printers now available. Simple, versatile, low cost plotting routines that can generate output on high quality laser printers are needed and standard FORTRAN language plotting routines using output in Postscript language seems logical. The purpose here is to explain two simple FORTRAN plotting routines that generate output in Postscript language.

Method for solid state crystal growth

DOEpatents

Nolas, George S.; Beekman, Matthew K.

2013-04-09

A novel method for high quality crystal growth of intermetallic clathrates is presented. The synthesis of high quality pure phase crystals has been complicated by the simultaneous formation of both clathrate type-I and clathrate type-II structures. It was found that selective, phase pure, single-crystal growth of type-I and type-II clathrates can be achieved by maintaining sufficient partial pressure of a chemical constituent during slow, controlled deprivation of the chemical constituent from the primary reactant. The chemical constituent is slowly removed from the primary reactant by the reaction of the chemical constituent vapor with a secondary reactant, spatially separated from the primary reactant, in a closed volume under uniaxial pressure and heat to form the single phase pure crystals.

Planarised optical fiber composite using flame hydrolysis deposition demonstrating an integrated FBG anemometer.

PubMed

Holmes, Christopher; Gates, James C; Smith, Peter G R

2014-12-29

This paper reports for the first time a planarised optical fiber composite formed using Flame Hydrolysis Deposition (FHD). As a way of format demonstration a Micro-Opto-Electro-Mechanical (MOEMS) hot wire anemometer is formed using micro-fabrication processing. The planarised device is rigidly secured to a silicon wafer using optical quality doped silica that has been deposited using flame hydrolysis and consolidated at high temperature. The resulting structure can withstand temperatures exceeding 580K and is sensitive enough to resolve free and forced convection interactions at low fluid velocity.

Cross-cultural adaptation of the korean version of the minneapolis-manchester quality of life instrument-adolescent form.

PubMed

Park, Hyeon Jin; Yang, Hyung Kook; Shin, Dong Wook; Kim, Yoon Yi; Kim, Young Ae; Yun, Young Ho; Nam, Byung Ho; Bhatia, Smita; Park, Byung Kiu; Ghim, Thad T; Kang, Hyoung Jin; Park, Kyung Duk; Shin, Hee Young; Ahn, Hyo Seop

2013-12-01

We verified the reliability and validity of the Korean version of the Minneapolis-Manchester Quality of Life Instrument-Adolescent Form (KMMQL-AF) among Korean childhood cancer survivors. A total of 107 childhood cancer patients undergoing cancer treatment and 98 childhood cancer survivors who completed cancer treatment were recruited. To assess the internal structure of the KMMQL-AF, we performed multi-trait scaling analyses and exploratory factor analysis. Additionally, we compared each domains of the KMMQL-AF with those of the Karnofsky Performance Status Scale and the Revised Children's Manifest Anxiety Scale (RCMAS). Internal consistency of the KMMQL-AF was sufficient (Cronbach's alpha: 0.78-0.92). In multi-trait scaling analyses, the KMMQL-AF showed sufficient construct validity. The "physical functioning" domain showed moderate correlation with Karnofsky scores and the "psychological functioning" domain showed moderate-to-high correlation with the RCMAS. The KMMQL-AF discriminated between subgroups of different adolescent cancer survivors depending on treatment completion. The KMMQL-AF is a sufficiently reliable and valid instrument for measuring quality of life among Korean childhood cancer survivors.

Ethnic Differences in the Developmental Significance of Parentification

PubMed Central

Khafi, Tamar Y.; Yates, Tuppett M.; Luthar, Suniya S.

2014-01-01

Using an ecological framework, this 2-wave longitudinal study examined the effects of parentification on youth adjustment across the transition to adolescence in a high-risk, low-income sample of African American (58%) and European American (42%) mother-child dyads (T1 Mage = 10.17 years, T2 Mage = 14.89 years; 52.4% female). Children’s provision of family caregiving was moderately stable from early to late adolescence. Emotional and instrumental parentification evidenced distinct long-term effects on adolescents’ psychopathology and the quality of the parent-child relationship. Ethnicity moderated these relations. Emotional and instrumental parentification behaviors were associated with predominantly negative outcomes among European American youth in the form of increased externalizing behavior problems and decreased parent-child relationship quality, whereas emotional parentification was associated with positive outcomes among African American youth in the form of increased parent-child relationship quality, and instrumental parentification was neutral. These findings support a multidimensional view of parentification as a set of culturally-embedded phenomena whose effects can only be understood in consideration of the context in which they occur. PMID:24684188

Effects of Backpackers and Stock Use on Wilderness Water Quality in Sequoia & Kings Canyon National Parks

NASA Astrophysics Data System (ADS)

Forrester, H.; Roop, H. A.; Clow, D. W.

2011-12-01

Backpackers and pack animals, primarily horses and mules, may impair water quality in high-use zones of federally designated wilderness areas within Sequoia and Kings Canyon National Parks (SEKI). Impacts include erosion from trails, campsites and grazing sites, which increases suspended sediment concentrations and turbidity in downstream water bodies; and fecal matter that may be washed into surface waters during rainstorms or snowmelt periods. The fecal matter also may contain pathogenic bacteria such as Escherichia coli (E. coli) that can pose a health threat to humans. This study aims to establish a working methodology to document and assess effects from backpackers and stock use on physical, chemical and biological water quality parameters. In July 2010, monitoring stations were established within the high-use Crabtree Ranger Station zone. Sites were selected to represent high backpacker use, high pack-animal use, and background conditions. Monitoring stations are instrumented to continuously record water level, temperature, and turbidity and to automatically collect storm samples. Water samples are analyzed for dissolved and particulate nutrients, suspended sediment, and E. coli concentrations. Preliminary data show E. coli counts averaged 4.5 Colony Forming Units/100ml (CFUs) at the high backpacker use, 29.0 CFUs at the high-pack animal use, and 3.4 CFUs at the background sites. Results from the nutrients and suspended sediment analyses are pending. Data collection continued throughout the 2011 field season, with the objective of better quantifying differences in water quality among the study sites.

Temperature determines size and direction of effects of elevated CO2 and nitrogen form on yield quantity and quality of Chinese cabbage.

PubMed

Reich, M; van den Meerakker, A N; Parmar, S; Hawkesford, M J; De Kok, L J

2016-01-01

Rising atmospheric CO2 concentrations (e[CO2 ]) are presumed to have a significant impact on plant growth and yield and also on mineral nutrient composition, and therefore, on nutritional quality of crops and vegetables. To assess the relevance of these effects in future agroecosystems it is important to understand how e[CO2 ] interacts with other environmental factors. In the present study, we examined the interactive effects of e[CO2 ] with temperature and the form in which nitrogen is supplied (nitrate or ammonium nitrate) on growth, amino acid content and mineral nutrient composition of Chinese cabbage (Brassica pekinensis Rupr.), a crop characterised by its high nutritional value and increasing relevance for human nutrition in many developing countries. Higher temperature, ammonium nitrate and e[CO2 ] had a positive impact on net photosynthesis and growth. A stimulating effect of e[CO2 ] on growth was only observed if the temperature was high (21/18 °C, day/night), and an interaction of e[CO2 ] with N form was only observed if the temperature was ambient (15/12 °C, day/night). Mineral nutrient composition was affected in a complex manner by all three factors and their interaction. These results demonstrate how much the effect of e[CO2 ] on mineral quality of crops depends on other environmental factors. Changes in temperature, adapting N fertilisation and the oxidation state of N have the potential to counteract the mineral depletion caused by e[CO2 ]. © 2015 German Botanical Society and The Royal Botanical Society of the Netherlands.

Analysis of residual stress state in sheet metal parts processed by single point incremental forming

NASA Astrophysics Data System (ADS)

Maaß, F.; Gies, S.; Dobecki, M.; Brömmelhoff, K.; Tekkaya, A. E.; Reimers, W.

2018-05-01

The mechanical properties of formed metal components are highly affected by the prevailing residual stress state. A selective induction of residual compressive stresses in the component, can improve the product properties such as the fatigue strength. By means of single point incremental forming (SPIF), the residual stress state can be influenced by adjusting the process parameters during the manufacturing process. To achieve a fundamental understanding of the residual stress formation caused by the SPIF process, a valid numerical process model is essential. Within the scope of this paper the significance of kinematic hardening effects on the determined residual stress state is presented based on numerical simulations. The effect of the unclamping step after the manufacturing process is also analyzed. An average deviation of the residual stress amplitudes in the clamped and unclamped condition of 18 % reveals, that the unclamping step needs to be considered to reach a high numerical prediction quality.

Electron microscopy observation of TiO2 nanocrystal evolution in high-temperature atomic layer deposition.

PubMed

Shi, Jian; Li, Zhaodong; Kvit, Alexander; Krylyuk, Sergiy; Davydov, Albert V; Wang, Xudong

2013-01-01

Understanding the evolution of amorphous and crystalline phases during atomic layer deposition (ALD) is essential for creating high quality dielectrics, multifunctional films/coatings, and predictable surface functionalization. Through comprehensive atomistic electron microscopy study of ALD TiO2 nanostructures at designed growth cycles, we revealed the transformation process and sequence of atom arrangement during TiO2 ALD growth. Evolution of TiO2 nanostructures in ALD was found following a path from amorphous layers to amorphous particles to metastable crystallites and ultimately to stable crystalline forms. Such a phase evolution is a manifestation of the Ostwald-Lussac Law, which governs the advent sequence and amount ratio of different phases in high-temperature TiO2 ALD nanostructures. The amorphous-crystalline mixture also enables a unique anisotropic crystal growth behavior at high temperature forming TiO2 nanorods via the principle of vapor-phase oriented attachment.

Relational victimization, friendship, and adolescents' hypothalamic-pituitary-adrenal axis responses to an in vivo social stressor.

PubMed

Calhoun, Casey D; Helms, Sarah W; Heilbron, Nicole; Rudolph, Karen D; Hastings, Paul D; Prinstein, Mitchell J

2014-08-01

Adolescents' peer experiences may have significant associations with biological stress-response systems, adding to or reducing allostatic load. This study examined relational victimization as a unique contributor to reactive hypothalamic-pituitary-adrenal (HPA) axis responses as well as friendship quality and behavior as factors that may promote HPA recovery following a stressor. A total of 62 adolescents (ages 12-16; 73% female) presenting with a wide range of life stressors and adjustment difficulties completed survey measures of peer victimization and friendship quality. Cortisol samples were collected before and after a lab-based interpersonally themed social stressor task to provide measures of HPA baseline, reactivity, and recovery. Following the stressor task, adolescents discussed their performance with a close friend; observational coding yielded measures of friends' responsiveness. Adolescents also reported positive and negative friendship qualities. Results suggested that higher levels of adolescents' relational victimization were associated with blunted cortisol reactivity, even after controlling for physical forms of victimization and other known predictors of HPA functioning (i.e., life stress or depressive symptoms). Friendship qualities (i.e., low negative qualities) and specific friendship behaviors (i.e., high levels of responsiveness) contributed to greater HPA regulation; however, consistent with theories of rumination, high friend responsiveness in the context of high levels of positive friendship quality contributed to less cortisol recovery. Findings extend prior work on the importance of relational victimization and dyadic peer relations as unique and salient correlates of adaptation in adolescence.

Relational victimization, friendship, and adolescents’ hypothalamic–pituitary–adrenal axis responses to an in vivo social stressor

PubMed Central

CALHOUN, CASEY D.; HELMS, SARAH W.; HEILBRON, NICOLE; RUDOLPH, KAREN D.; HASTINGS, PAUL D.; PRINSTEIN, MITCHELL J.

2014-01-01

Adolescents’ peer experiences may have significant associations with biological stress-response systems, adding to or reducing allostatic load. This study examined relational victimization as a unique contributor to reactive hypothalamic–pituitary–adrenal (HPA) axis responses as well as friendship quality and behavior as factors that may promote HPA recovery following a stressor. A total of 62 adolescents (ages 12–16; 73% female) presenting with a wide range of life stressors and adjustment difficulties completed survey measures of peer victimization and friendship quality. Cortisol samples were collected before and after a lab-based interpersonally themed social stressor task to provide measures of HPA baseline, reactivity, and recovery. Following the stressor task, adolescents discussed their performance with a close friend; observational coding yielded measures of friends’ responsiveness. Adolescents also reported positive and negative friendship qualities. Results suggested that higher levels of adolescents’ relational victimization were associated with blunted cortisol reactivity, even after controlling for physical forms of victimization and other known predictors of HPA functioning (i.e., life stress or depressive symptoms). Friendship qualities (i.e., low negative qualities) and specific friendship behaviors (i.e., high levels of responsiveness) contributed to greater HPA regulation; however, consistent with theories of rumination, high friend responsiveness in the context of high levels of positive friendship quality contributed to less cortisol recovery. Findings extend prior work on the importance of relational victimization and dyadic peer relations as unique and salient correlates of adaptation in adolescence. PMID:25047287

High-quality JPEG compression history detection for fake uncompressed images

NASA Astrophysics Data System (ADS)

Zhang, Rong; Wang, Rang-Ding; Guo, Li-Jun; Jiang, Bao-Chuan

2017-05-01

Authenticity is one of the most important evaluation factors of images for photography competitions or journalism. Unusual compression history of an image often implies the illicit intent of its author. Our work aims at distinguishing real uncompressed images from fake uncompressed images that are saved in uncompressed formats but have been previously compressed. To detect the potential image JPEG compression, we analyze the JPEG compression artifacts based on the tetrolet covering, which corresponds to the local image geometrical structure. Since the compression can alter the structure information, the tetrolet covering indexes may be changed if a compression is performed on the test image. Such changes can provide valuable clues about the image compression history. To be specific, the test image is first compressed with different quality factors to generate a set of temporary images. Then, the test image is compared with each temporary image block-by-block to investigate whether the tetrolet covering index of each 4×4 block is different between them. The percentages of the changed tetrolet covering indexes corresponding to the quality factors (from low to high) are computed and used to form the p-curve, the local minimum of which may indicate the potential compression. Our experimental results demonstrate the advantage of our method to detect JPEG compressions of high quality, even the highest quality factors such as 98, 99, or 100 of the standard JPEG compression, from uncompressed-format images. At the same time, our detection algorithm can accurately identify the corresponding compression quality factor.

The effects of ion gun beam voltage on the electrical characteristics of NbCN/PbBi edge junctions

NASA Technical Reports Server (NTRS)

Lichtenberger, A. W.; Feldman, M. J.; Mattauch, R. J.; Cukauskas, E. J.

1989-01-01

The authors have succeeded in fabricating high-quality submicron NbCN edge junctions using a technique which is commonly used to make Nb edge junctions. A modified commercial ion gun was used to cut an edge in SiO2/NbCN films partially covered with photoresist. An insulating barrier was then formed on the exposed edge by reactive ion beam oxidation, and a counterelectrode of PbBi was deposited. The electrical quality of the resulting junctions was found to be strongly influenced by the ion beam acceleration voltages used to cut the edge and to oxidize it. For low ion beam voltages, the junction quality parameter was as high as Vm = 55 mV (measured at 3 mV), but higher ion beam voltages yielded strikingly poorer quality junctions. In light of the small coherence length of NbN, the dependence of the electrical characteristics on ion beam voltage is presumably due to mechanical damage of the NbCN surface. In contrast, for similar ion beam voltages, no such dependence was found for Nb edge junctions.

Waste deposit influences on groundwater quality as a tool for waste type and site selection for final storage quality

NASA Astrophysics Data System (ADS)

Arneth, Jan-Dirk; Milde, Gerald; Kerndorff, Helmut; Schleyer, Ruprecht

Leachates from deposits of wastes may, in the long run, adversely influence groundwater quality. Since tipping still constitutes the most important form of waste disposal, strategies must be developed which are capable of protecting groundwater against contamination from leachates. In the first instance such protective measures must provide for a minimization of contamination by setting up optimal barriers. Since it would seem difficult to reach this goal in a forseeable future, the avoidance of substances with a high potential for groundwater hazards has to be attributed much importance. In former times, little attention was given to impermeability or avoidance of substances with a high potential for groundwater hazards contained in wastes. Therefore, results of the investigation of groundwater near abandoned sites can be used to optimize groundwater protection on future tipping sites. In the present study, the results of chemical investigation of groundwater from the vicinity of 92 waste disposal sites in the Federal Republic of Germany are presented and the changes in groundwater quality owing to the penetration of leachates are discussed separately for inorganic and organic contaminants.

Comparative mass spectrometry & nuclear magnetic resonance metabolomic approaches for nutraceuticals quality control analysis: a brief review.

PubMed

Farag, Mohamed A

2014-01-01

The number of botanical dietary supplements in the market has recently increased primarily due to increased health awareness. Standardization and quality control of the constituents of these plant extracts is an important topic, particularly when such ingredients are used long term as dietary supplements, or in cases where higher doses are marketed as drugs. The development of fast, comprehensive, and effective untargeted analytical methods for plant extracts is of high interest. Nuclear magnetic resonance spectroscopy and mass spectrometry are the most informative tools, each of which enables high-throughput and global analysis of hundreds of metabolites in a single step. Although only one of the two techniques is utilized in the majority of plant metabolomics applications, there is a growing interest in combining the data from both platforms to effectively unravel the complexity of plant samples. The application of combined MS and NMR in the quality control of nutraceuticals forms the major part of this review. Finally I will look at the future developments and perspectives of these two technologies for the quality control of herbal materials.

Improving quality: bridging the health sector divide.

PubMed

Pringle, Mike

2003-12-01

All too often, quality assurance looks at just one small part of the complex system that is health care. However, evidently each individual patient has one set of experiences and outcomes, often involving a range of health professionals in a number of settings across multiple sectors. In order to solve the problems of this complexity, we need to establish high-quality electronic recording in each of the settings. In the UK, primary care has been leading the way in adopting information technology and can now use databases for individual clinical care, for quality assurance using significant event and conventional auditing, and for research. Before we can understand and quality-assure the whole health care system, we need electronic patient records in all settings and good communication to build a summary electronic health record for each patient. Such an electronic health record will be under the control of the patient concerned, will be shared with the explicit consent of the patient, and will form the vehicle for quality assurance across all sectors of the health service.

A systematic review and meta-analysis on the efficacy of Internet-delivered behavioral activation.

PubMed

Huguet, Anna; Miller, Alyssa; Kisely, Steve; Rao, Sanjay; Saadat, Nelda; McGrath, Patrick J

2018-08-01

Behavioral activation (BA) is an evidence-based treatment for depression which has attracted interest and started to accumulate evidence for other conditions when delivered face-to-face. Due to its parsimoniousness, it is suitable to be delivered via the Internet. The goal of this systematic review and meta-analysis was to examine evidence from randomized controlled trials (RCTs) to determine the efficacy of Internet-based BA and assess the quality of this evidence. Studies were identified from electronic databases (EMBASE, ISI Web of Knowledge, Medline, CINHAL, PsychINFO, Cochrane) and reference lists of included studies. Two reviewers independently screened articles for inclusion and extracted data. They assessed the quality of evidence for each outcome using The Grading of Recommendations Assessment, Development and Evaluation framework. Nine RCTs on different forms of depression were included with 2157 adult participants. Random effects meta-analyses showed that in non-clinical settings, guided Internet-based BA was non-inferior to other forms of behavioral therapy and mindfulness (mainly very low to low quality evidence) and superior to physical activity (very low quality evidence), psychoeducation/treatment as usual (moderate quality evidence) and waitlist (low quality evidence) at reducing depression and anxiety outcomes at post-treatment and short follow-up. The poor quality of some of the findings means that results should be cautiously interpreted. Evidence for the efficacy of Internet-based BA as a treatment for depression is promising. However, high quality studies with longer follow-ups are needed to increase confidence in findings and determine its efficacy in clinical settings and other conditions. Copyright © 2018 Elsevier B.V. All rights reserved.

Changes in self-reported health and quality of life in octogenarian patients one month after transcatheter aortic valve implantation.

PubMed

Olsen, Siv Js; Fridlund, Bengt; Eide, Leslie Sp; Hufthammer, Karl O; Kuiper, Karel Kj; Nordrehaug, Jan E; Skaar, Elisabeth; Norekvål, Tone M

2017-01-01

In addition to favourable results regarding mortality and morbidity it is important to identify the impact transcatheter aortic valve implantation (TAVI) has on patients' quality of life. The aims were: (i) to describe clinical characteristics, self-reported health and quality of life in octogenarians before TAVI intervention; (ii) to determine changes in self-reported health and quality of life one month after TAVI; and (iii) to establish the clinical importance of the findings. A prospective cohort study was conducted on consecutively enrolled octogenarians with severe aortic stenosis undergoing TAVI ( N = 65). Self-reported health and quality of life were recorded at baseline and one month later using two global questions from the World Health Organization Quality of Life Instrument Abbreviated (WHOQOL-BREF), the generic Short Form Health 12 and the disease-specific Minnesota Living with Heart Failure Questionnaire. One month after TAVI, WHOQOL-BREF showed that self-reported health improved moderately ( p < 0.001), while quality of life improved slightly, but not statistically significantly ( p = 0.06). There were changes in all Short Form Health 12 domains, except social functioning and role emotional. The estimated changes were 3.6 to 5.8 with large confidence intervals. The Physical Component Summary increased statistically significantly from baseline to 30 days (30.6-34.7; p = 0.02), but the Mental Component Summary did not (46.9-50.0; p = 0.13). Despite being an advanced treatment performed in a high risk population, TAVI in octogenarians improves short-term self-reported global health and generic physical health and quality of life. These patient-reported outcomes have importance, particularly in this age group.

Evaluation and comparison of epidural analgesia in labour related information on French and English-speaking websites.

PubMed

Espitalier, Fabien; De Lamer, Sabine; Barbaz, Mathilde; Laffon, Marc; Remérand, Francis

2018-01-31

The medical information on the Internet is better in English than in other languages. The information about Epidural Analgesia In Labour (EAIL) available on French-speaking websites is of poor quality. The quality of the information about EAIL should be better in English, but there is no comparison available. This study has assessed and compared the quality of the information about EAIL available on French and English-speaking websites. Keywords "epidural", "épidurale" and/or "péridurale" were used in the French, Canadian and American Google ® and Yahoo ® search engines. Two independent assessors assessed the 20 first websites for each engine search. They used an evaluation form created from French, Canadian and American recommendations. This form assessed the structure quality (Structure Score/25) and the medical information quality (Medical Information Score/30) of the websites. The addition of both scores gives the Global Score (/55). Seventy-one websites were assessed, 39 French-speaking and 32 English-speaking websites. Structure, Medical Information and Global Scores (expressed as mean (SD)) were respectively 11 (4), 13 (5), 24 (8) for the French-speaking websites and 11 (4), 12 (4), 23 (7) for the English-speaking websites. There was no statistical significant difference between both languages. Information about EAIL available on French and English-speaking websites is of poor quality and there is no difference in the information quality, whatever the language. A consideration on Internet medical information improvement is needed. A high quality dedicated website should be created and broadcasted. Copyright © 2018 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

A comparison between patient recall and concurrent measurement of preoperative quality of life outcome in total hip arthroplasty.

PubMed

Howell, Jonathan; Xu, Min; Duncan, Clive P; Masri, Bassam A; Garbuz, Donald S

2008-09-01

The objective is to evaluate the reliability of patients' recall of preoperative pain and function during the immediate postoperation period after total hip arthroplasty. A prospective cohort of 104 patients completed a survey about their quality of life before operation, and recalled preoperative status at 3 days, 6 weeks, and 12 weeks after operation. Quality of life was measured by the Western Ontario and McMaster University Osteoarthritis Index, the Oxford-12 hip score, and the 12-item Short-Form score. The intraclass correlation coefficient and Spearman correlation coefficient were used to compare preoperative quality of life scores to the scores recalled. The reliability of recall remained high up to 3 months postoperation. Patients are able to accurately recall their preoperative function for up to 3 months after total hip arthroplasty.

Design and implementation of a mobile system for lung cancer patient follow-up in China and initial report of the ongoing patient registry

PubMed Central

Li, Ziming; Niu, Xiaomin; Wang, Jiemin; Chen, Yunqin; Guo, Zongming; Lu, Shun

2017-01-01

Introduction Management of lung cancer remains a challenge. Although clinical and biological patient data are crucial for cancer research, these data may be missing from registries and clinical trials. Biobanks provide a source of high-quality biological material for clinical research; however, linking these samples to the corresponding patient and clinical data is technically challenging. We describe the mobile Lung Cancer Care system (mLCCare), a novel tool which integrates biological and clinical patient data into a single resource. Methods mLCCare was developed as a mobile device application (app) and an internet website. Data storage is hosted on cloud servers, with the mobile app and website acting as a front-end to the system. mLCCare also facilitates communication with patients to remind them to take their medication and attend follow-up appointments. Results Between January 2014 and October 2015, 5,080 patients with lung cancer have been registered with mLCCare. Data validation ensures all the patient information is of consistently high-quality. Patient cohorts can be constructed via user-specified criteria and data exported for statistical analysis by authorized investigators and collaborators. mLCCare forms the basis of establishing an ongoing lung cancer registry and could form the basis of a high-quality multisite patient registry. Integration of mLCCare with SMS messaging and WeChat functionality facilitates communication between physicians and patients. Conclusion It is hoped that mLCCare will prove to be a powerful and widely used tool that will enhance both research and clinical practice. PMID:27911868

Design and implementation of a mobile system for lung cancer patient follow-up in China and initial report of the ongoing patient registry.

PubMed

Ye, Xiangyun; Wei, Jia; Li, Ziming; Niu, Xiaomin; Wang, Jiemin; Chen, Yunqin; Guo, Zongming; Lu, Shun

2017-01-17

Management of lung cancer remains a challenge. Although clinical and biological patient data are crucial for cancer research, these data may be missing from registries and clinical trials. Biobanks provide a source of high-quality biological material for clinical research; however, linking these samples to the corresponding patient and clinical data is technically challenging. We describe the mobile Lung Cancer Care system (mLCCare), a novel tool which integrates biological and clinical patient data into a single resource. mLCCare was developed as a mobile device application (app) and an internet website. Data storage is hosted on cloud servers, with the mobile app and website acting as a front-end to the system. mLCCare also facilitates communication with patients to remind them to take their medication and attend follow-up appointments. Between January 2014 and October 2015, 5,080 patients with lung cancer have been registered with mLCCare. Data validation ensures all the patient information is of consistently high-quality. Patient cohorts can be constructed via user-specified criteria and data exported for statistical analysis by authorized investigators and collaborators. mLCCare forms the basis of establishing an ongoing lung cancer registry and could form the basis of a high-quality multisite patient registry. Integration of mLCCare with SMS messaging and WeChat functionality facilitates communication between physicians and patients. It is hoped that mLCCare will prove to be a powerful and widely used tool that will enhance both research and clinical practice.

Effects of patch quality and network structure on patch occupancy dynamics of a yellow-bellied marmot metapopulation.

PubMed

Ozgul, Arpat; Armitage, Kenneth B; Blumstein, Daniel T; Vanvuren, Dirk H; Oli, Madan K

2006-01-01

1. The presence/absence of a species at a particular site is the simplest form of data that can be collected during ecological field studies. We used 13 years (1990-2002) of survey data to parameterize a stochastic patch occupancy model for a metapopulation of the yellow-bellied marmot in Colorado, and investigated the significance of particular patches and the influence of site quality, network characteristics and regional stochasticity on the metapopulation persistence. 2. Persistence of the yellow-bellied marmot metapopulation was strongly dependent on the high quality colony sites, and persistence probability was highly sensitive to small changes in the quality of these sites. 3. A relatively small number of colony sites was ultimately responsible for the regional persistence. However, lower quality satellite sites also made a significant contribution to long-term metapopulation persistence, especially when regional stochasticity was high. 4. The northern network of the marmot metapopulation was more stable compared to the southern network, and the persistence of the southern network depended heavily on the northern network. 5. Although complex models of metapopulation dynamics may provide a more accurate description of metapopulation dynamics, such models are data-intensive. Our study, one of the very few applications of stochastic patch occupancy models to a mammalian species, suggests that stochastic patch occupancy models can provide important insights into metapopulation dynamics using data that are easy to collect.

Transmission of laser pulses with high output beam quality using step-index fibers having large cladding

DOEpatents

Yalin, Azer P; Joshi, Sachin

2014-06-03

An apparatus and method for transmission of laser pulses with high output beam quality using large core step-index silica optical fibers having thick cladding, are described. The thick cladding suppresses diffusion of modal power to higher order modes at the core-cladding interface, thereby enabling higher beam quality, M.sup.2, than are observed for large core, thin cladding optical fibers. For a given NA and core size, the thicker the cladding, the better the output beam quality. Mode coupling coefficients, D, has been found to scale approximately as the inverse square of the cladding dimension and the inverse square root of the wavelength. Output from a 2 m long silica optical fiber having a 100 .mu.m core and a 660 .mu.m cladding was found to be close to single mode, with an M.sup.2=1.6. Another thick cladding fiber (400 .mu.m core and 720 .mu.m clad) was used to transmit 1064 nm pulses of nanosecond duration with high beam quality to form gas sparks at the focused output (focused intensity of >100 GW/cm.sup.2), wherein the energy in the core was <6 mJ, and the duration of the laser pulses was about 6 ns. Extending the pulse duration provided the ability to increase the delivered pulse energy (>20 mJ delivered for 50 ns pulses) without damaging the silica fiber.

3D printing of high drug loaded dosage forms using thermoplastic polyurethanes.

PubMed

Verstraete, G; Samaro, A; Grymonpré, W; Vanhoorne, V; Van Snick, B; Boone, M N; Hellemans, T; Van Hoorebeke, L; Remon, J P; Vervaet, C

2018-01-30

It was the aim of this study to develop high drug loaded (>30%, w/w), thermoplastic polyurethane (TPU)-based dosage forms via fused deposition modelling (FDM). Model drugs with different particle size and aqueous solubility were pre-processed in combination with diverse TPU grades via hot melt extrusion (HME) into filaments with a diameter of 1.75 ± 0.05 mm. Subsequently, TPU-based filaments which featured acceptable quality attributes (i.e. consistent filament diameter, smooth surface morphology and good mechanical properties) were printed into tablets. The sustained release potential of the 3D printed dosage forms was tested in vitro. Moreover, the impact of printing parameters on the in vitro drug release was investigated. TPU-based filaments could be loaded with 60% (w/w) fine drug powder without observing severe shark skinning or inconsistent filament diameter. During 3D printing experiments, HME filaments based on hard TPU grades were successfully converted into personalized dosage forms containing a high concentration of crystalline drug (up to 60%, w/w). In vitro release kinetics were mainly affected by the matrix composition and tablet infill degree. Therefore, this study clearly demonstrated that TPU-based FDM feedstock material offers a lot of formulation freedom for the development of personalized dosage forms. Copyright © 2017 Elsevier B.V. All rights reserved.

Low-Voltage Organic Single-Crystal Field-Effect Transistor with Steep Subthreshold Slope.

PubMed

Yang, Fangxu; Sun, Lingjie; Han, Jiangli; Li, Baili; Yu, Xi; Zhang, Xiaotao; Ren, Xiaochen; Hu, Wenping

2018-03-06

Anodization is a promising technique to form high- k dielectrics for low-power organic field-effect transistor (OFET) applications. However, the surface quality of the dielectric, which is mainly inherited from the metal electrode, can be improved further than other fabrication techniques, such as sol-gel. In this study, we applied the template stripping method to fabricate a low-power single-crystalline OFET based on the anodized AlO x dielectric. We found that the template stripping method largely improves the surface roughness of the deposited Al and allows for the formation of a high-quality AlO x high- k dielectric by anodization. The ultraflat AlO x /SAM dielectric combined with a single-crystal 2,6-diphenylanthracene (DPA) semiconductor produced a nearly defect-free interface with a steep subthreshold swing (SS) of 66 mV/decade. The current device is a promising candidate for future ultralow-power applications. Other than metal deposition, template stripping could provide a general approach to improve thin-film quality for many other types of materials and processes.

Navy Electroplating Pollution Control Technology Assessment Manual.

DTIC Science & Technology

1984-02-01

quality. Dummying of chromium baths is used in the special case where high cathode-to-anode 5ea ratio has resulted in build up of trivalent chromium (Cr...Dummying with a high anode -to-cat hode area ratio can be 6used to reoxidize the trivalent to hexavalent chromium (Cr ).Proper scheduling of work can...unit processes: * Chromium reduction (if needed) of segregated chromium waste streams to reduce the chromium from its hexavalent form to the trivalent

Effects of working pressure and annealing on bulk density and nanopore structures in amorphous In-Ga-Zn-O thin-film transistors

NASA Astrophysics Data System (ADS)

Ide, Keisuke; Kikuchi, Mitsuho; Ota, Masato; Sasase, Masato; Hiramatsu, Hidenori; Kumomi, Hideya; Hosono, Hideo; Kamiya, Toshio

2017-03-01

Microstructures of amorphous In-Ga-Zn-O (a-IGZO) thin films of different densities were analyzed. Device-quality a-IGZO films were deposited under optimum conditions, e.g., the total pressure P tot = 0.55 Pa produced high film densities of ˜6.1 g/cm3, while a very high P tot = 5.0 Pa produced low film densities of 5.5 g/cm3. Both films formed uniform high-density layers in the vicinity of the glass substrate, 10-20 nm in thickness depending on P tot, while their growth mode changed to a sparse columnar structure in thicker regions. X-ray reflectivity and in situ spectroscopic ellipsometry provided different results on densification by post deposition thermal annealing; i.e., the latter has a higher sensitivity. High-Z-contrast images obtained by high-angle annular dark-field scanning transmission electron microscopy were also useful for detecting nanometer-size non uniformity even in device-quality a-IGZO films.

High-quality draft genome sequence of Rhizobium mesoamericanum strain STM6155, a Mimosa pudica microsymbiont from New Caledonia

DOE PAGES

Klonowska, Agnieszka; López-López, Aline; Moulin, Lionel; ...

2017-01-17

Rhizobium mesoamericanum STM6155 (INSCD=ATYY01000000) is an aerobic, motile, Gram-negative, non-spore-forming rod that can exist as a soil saprophyte or as an effective nitrogen fixing microsymbiont of the legume Mimosa pudica L.. STM6155 was isolated in 2009 from a nodule of the trap host M. pudica grown in nickel-rich soil collected near Mont Dore, New Caledonia. R. mesoamericanum STM6155 was selected as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) genome sequencing project. Here we describe the symbiotic properties of R. mesoamericanum STM6155, together with its genome sequence information and annotation. Themore » 6,927,906bp high-quality draft genome is arranged into 147 scaffolds of 152 contigs containing 6855 protein-coding genes and 71 RNA-only encoding genes. Strain STM6155 forms an ANI clique (ID 2435) with the sequenced R. mesoamericanum strain STM3625, and the nodulation genes are highly conserved in these strains and the type strain of Rhizobium grahamii CCGE501 T . Within the STM6155 genome, we have identified a chr chromate efflux gene cluster of six genes arranged into two putative operons and we postulate that this cluster is important for the survival of STM6155 in ultramafic soils containing high concentrations of chromate.« less

High-quality draft genome sequence of Rhizobium mesoamericanum strain STM6155, a Mimosa pudica microsymbiont from New Caledonia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klonowska, Agnieszka; López-López, Aline; Moulin, Lionel

Rhizobium mesoamericanum STM6155 (INSCD=ATYY01000000) is an aerobic, motile, Gram-negative, non-spore-forming rod that can exist as a soil saprophyte or as an effective nitrogen fixing microsymbiont of the legume Mimosa pudica L.. STM6155 was isolated in 2009 from a nodule of the trap host M. pudica grown in nickel-rich soil collected near Mont Dore, New Caledonia. R. mesoamericanum STM6155 was selected as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) genome sequencing project. Here we describe the symbiotic properties of R. mesoamericanum STM6155, together with its genome sequence information and annotation. Themore » 6,927,906bp high-quality draft genome is arranged into 147 scaffolds of 152 contigs containing 6855 protein-coding genes and 71 RNA-only encoding genes. Strain STM6155 forms an ANI clique (ID 2435) with the sequenced R. mesoamericanum strain STM3625, and the nodulation genes are highly conserved in these strains and the type strain of Rhizobium grahamii CCGE501 T . Within the STM6155 genome, we have identified a chr chromate efflux gene cluster of six genes arranged into two putative operons and we postulate that this cluster is important for the survival of STM6155 in ultramafic soils containing high concentrations of chromate.« less

Peer Review as a Strategy for Improving Students' Writing Process

ERIC Educational Resources Information Center

Baker, Kimberly M.

2016-01-01

Peer review is an established strategy for improving the quality of students' writing. This study moves beyond the focus on outcomes to assess the peer-review process. In particular, this study focuses on the timing of the peer review, a highly structured feedback form, and student writers' revisions after engaging in peer review. This study draws…

Targeting physiological activities to modify the ecology and functionality of rumen and gastrointestinal ecosystems, prototypical anaerobic digester

USDA-ARS?s Scientific Manuscript database

The rumen microbial ecosystem is highly regarded for its ability to digest and transform low quality plant material into chemical forms of use by the host. However, less than 35% of the dietary energy consumed by the ruminant is conserved by the host. Methane production within the rumen contribute...

An Experiential Approach to Clinical Supervision Training: A Mixed Methods Evaluation of Effectiveness

ERIC Educational Resources Information Center

Fisher, Amy Killen; Simmons, Christopher; Allen, Susan C.

2016-01-01

This study evaluates an intensive experiential exercise designed to facilitate the provision of high-quality supervision in social work. Data from 46 BSW and MSW students suggest that the exercise can be an effective learning tool. Both quantitative and qualitative findings indicated that the students formed a supervisory working alliance; BSW…

Learning to Lead, Leading to Learn: How Facilitators Learn to Lead Lesson Study

ERIC Educational Resources Information Center

Lewis, Jennifer M.

2016-01-01

This article presents research on how teacher developers in the United States learn to conduct lesson study. Although the practice of lesson study is expanding rapidly in the US, high-quality implementation requires skilled facilitation. In contexts such as the United States where this form of professional development is relatively novel, few…

Riverbed formation

NASA Technical Reports Server (NTRS)

Skinner, M.

1972-01-01

The general fluvial processes that work to form a riverbed and produce the characteristic pattern of either meandering, braided, or straight are reviewed. A method for quantification of river pattern and correlation, with the basic hydraulic characteristics of discharge and slope, is presented. Additional characteristics of a river system may be deduced from high-quality photography and imagery obtained from either aircraft or space platforms.

Committing to Equity and Inclusive Excellence: A Campus Guide for Self-Study and Planning

ERIC Educational Resources Information Center

Association of American Colleges and Universities, 2015

2015-01-01

To serve students and society well, higher education needs to make a pervasive commitment to equity and inclusive excellence--both preparing students for and providing them with access to high-quality learning opportunities, and ensuring that students of color and low-income students participate in the most empowering forms of college learning.…

Validation and reliability of the Turkish Utian Quality-of-Life Scale in postmenopausal women.

PubMed

Abay, Halime; Kaplan, Sena

2016-04-01

There are a limited number of menopause-specific quality-of-life scales for the Turkish population. This study was conducted to evaluate the validity and reliability of the Turkish Utian Quality-of-Life Scale in postmenopausal women. The study group was comprised of 250 postmenopausal women who applied to a training and research hospital's menopause clinic in Turkey. A survey form and the Turkish Utian quality-of-Life Scale were used to collect data, and the Turkish version of Short Form-36 was used to evaluate reliability with an equivalent form. Language-validity, content-validity, and construct-validity methods were used to assess the validity of the scale, and Cronbach's α coefficient calculation and the equivalent-form reliability methods were used to assess the reliability of the scale. The Turkish Utian Quality-of-Life Scale was determined to be a valid and reliable instrument for measuring the quality of life of postmenopausal women. Confirmatory factor analysis demonstrates that the instrument fits well with 23 items and a four-factor model. The Cronbach's α coefficient for the quality-of-life domains were as follows: 0.88 overall, 0.79 health, 0.78 emotional, 0.76 sexual, and 0.75 occupational. Reliability of the instrument was confirmed through significant correlations between scores on the Turkish version of the Utian Quality-of-Life Scale and the Turkish version of the Short Form-36 (r = 0.745, P < 0.001). This research emphasizes that the Turkish Utian Quality-of-Life Scale is reliable and valid in postmenopausal women-it is a useful instrument for measuring quality of life during menopause.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Wei, E-mail: wei.ren@helsinki.fi; Avchaciov, Konstantin; Nordlund, Kai

Carbon nanotubes are of wide interest due to their excellent properties such as tensile strength and electrical and thermal conductivity, but are not, when placed alone on a substrate, well resistant to mechanical wear. Diamond-like carbon (DLC), on the other hand, is widely used in applications due to its very good wear resistance. Combining the two materials could provide a very durable pure carbon nanomaterial enabling to benefit from the best properties of both carbon allotropes. However, the synthesis of high-quality diamond-like carbon uses energetic plasmas, which can damage the nanotubes. From previous works it is neither clear whether themore » quality of the tubes remains good after DLC deposition, nor whether the DLC above the tubes retains the high sp{sup 3} bonding fraction. In this work, we use experiments and classical molecular dynamics simulations to study the mechanisms of DLC formation on various carbon nanotube compositions. The results show that high-sp{sup 3}-content DLC can be formed provided the deposition conditions allow for sidewards pressure to form from a substrate close beneath the tubes. Under optimal DLC formation energies of around 40–70 eV, the top two nanotube atom layers are fully destroyed by the plasma deposition, but layers below this can retain their structural integrity.« less

Electro-deposition of superconductor oxide films

DOEpatents

Bhattacharya, Raghu N.

2001-01-01

Methods for preparing high quality superconducting oxide precursors which are well suited for further oxidation and annealing to form superconducting oxide films. The method comprises forming a multilayered superconducting precursor on a substrate by providing an electrodeposition bath comprising an electrolyte medium and a substrate electrode, and providing to the bath a plurality of precursor metal salts which are capable of exhibiting superconducting properties upon subsequent treatment. The superconducting precursor is then formed by electrodepositing a first electrodeposited (ED) layer onto the substrate electrode, followed by depositing a layer of silver onto the first electrodeposited (ED) layer, and then electrodepositing a second electrodeposited (ED) layer onto the Ag layer. The multilayered superconducting precursor is suitable for oxidation at a sufficient annealing temperature in air or an oxygen-containing atmosphere to form a crystalline superconducting oxide film.

Nonequiatomic NiTi Alloy Produced by Self Propagating High Temperature Synthesis

NASA Astrophysics Data System (ADS)

Bassani, P.; Bassani, E.; Tuissi, A.; Giuliani, P.; Zanotti, C.

2014-07-01

Shape memory alloy NiTi in porous form is of high interest as implantable material, as low apparent elastic modulus, comparable to that of bone, can be achieved. This condition, combined with proper pore size, allows good osteointegration. Porous NiTi can be produced by self propagating high temperature synthesis (SHS), starting from mixed powders of pure Ni and Ti. Process parameters, among which powder compaction degree and preheating temperature, strongly influence the reaction temperature and the resulting product: at low reaction temperatures, high quantity of secondary phases are formed, which are generally considered detrimental for biocompatibility. On the contrary, at higher reaction temperatures, the powders melt and crystallize in ingots. The porous structure is lost and huge pores are formed. Mechanical activation of powders through ball milling and addition of TiH x are investigated as means to reduce reaction temperature and overheating, in order to preserve high porosity and limit secondary phases content. Both processes affect SHS reaction, and require adjustment of parameters such as heating rate. Changes in porous shape and size were observed especially for TiH x additions: the latter could be a promising route to obtain shaped porous products of improved quality.

Epitaxial thin films

DOEpatents

Hunt, Andrew Tye; Deshpande, Girish; Lin, Wen-Yi; Jan, Tzyy-Jiuan

2006-04-25

Epitatial thin films for use as buffer layers for high temperature superconductors, electrolytes in solid oxide fuel cells (SOFC), gas separation membranes or dielectric material in electronic devices, are disclosed. By using CCVD, CACVD or any other suitable deposition process, epitaxial films having pore-free, ideal grain boundaries, and dense structure can be formed. Several different types of materials are disclosed for use as buffer layers in high temperature superconductors. In addition, the use of epitaxial thin films for electrolytes and electrode formation in SOFCs results in densification for pore-free and ideal gain boundary/interface microstructure. Gas separation membranes for the production of oxygen and hydrogen are also disclosed. These semipermeable membranes are formed by high-quality, dense, gas-tight, pinhole free sub-micro scale layers of mixed-conducting oxides on porous ceramic substrates. Epitaxial thin films as dielectric material in capacitors are also taught herein. Capacitors are utilized according to their capacitance values which are dependent on their physical structure and dielectric permittivity. The epitaxial thin films of the current invention form low-loss dielectric layers with extremely high permittivity. This high permittivity allows for the formation of capacitors that can have their capacitance adjusted by applying a DC bias between their electrodes.

Measuring physiotherapy performance in patients with osteoarthritis of the knee: a prospective study.

PubMed

Jamtvedt, Gro; Dahm, Kristin Thuve; Holm, Inger; Flottorp, Signe

2008-07-08

Patients with knee osteoarthritis [OA] are commonly treated by physiotherapists in primary care. Measuring physiotherapy performance is important before developing strategies to improve quality. The purpose of this study was to measure physiotherapy performance in patients with knee OA by comparing clinical practice to evidence from systematic reviews. We developed a data-collection form and invited all private practitioners in Norway [n = 2798] to prospectively collect data on the management of one patient with knee OA through 12 treatment session. Actual practice was compared to findings from an overview of systematic reviews summarising the effect of physiotherapy interventions for knee OA. A total of 297 physiotherapists reported their management for patients with knee OA. Exercise was the most common treatment used, provided by 98% of the physiotherapists. There is evidence of high quality that exercise reduces pain and improves function in patients with knee OA. Thirty-five percent of physiotherapists used acupuncture, low-level laser therapy or transcutaneous electrical nerve stimulation. There is evidence of moderate quality that these treatments reduce pain in knee OA. Patient education, supported by moderate quality evidence for improving psychological outcomes, was provided by 68%. Physiotherapists used a median of four different treatment modalities for each patient. They offered many treatment modalities based on evidence of low quality or without evidence from systematic reviews, e.g. traction and mobilisation, massage and stretching. Exercise was used in almost all treatment sessions in the management of knee OA. This practice is desirable since it is supported by high quality evidence. Physiotherapists also provide several other treatment modalities based on evidence of moderate or low quality, or no evidence from systematic reviews. Ways to promote high quality evidence into physiotherapy practice should be identified and evaluated.

Measuring physiotherapy performance in patients with osteoarthritis of the knee: A prospective study

PubMed Central

Jamtvedt, Gro; Dahm, Kristin Thuve; Holm, Inger; Flottorp, Signe

2008-01-01

Background Patients with knee osteoarthritis [OA] are commonly treated by physiotherapists in primary care. Measuring physiotherapy performance is important before developing strategies to improve quality. The purpose of this study was to measure physiotherapy performance in patients with knee OA by comparing clinical practice to evidence from systematic reviews. Methods We developed a data-collection form and invited all private practitioners in Norway [n = 2798] to prospectively collect data on the management of one patient with knee OA through 12 treatment session. Actual practice was compared to findings from an overview of systematic reviews summarising the effect of physiotherapy interventions for knee OA. Results A total of 297 physiotherapists reported their management for patients with knee OA. Exercise was the most common treatment used, provided by 98% of the physiotherapists. There is evidence of high quality that exercise reduces pain and improves function in patients with knee OA. Thirty-five percent of physiotherapists used acupuncture, low-level laser therapy or transcutaneous electrical nerve stimulation. There is evidence of moderate quality that these treatments reduce pain in knee OA. Patient education, supported by moderate quality evidence for improving psychological outcomes, was provided by 68%. Physiotherapists used a median of four different treatment modalities for each patient. They offered many treatment modalities based on evidence of low quality or without evidence from systematic reviews, e.g. traction and mobilisation, massage and stretching. Conclusion Exercise was used in almost all treatment sessions in the management of knee OA. This practice is desirable since it is supported by high quality evidence. Physiotherapists also provide several other treatment modalities based on evidence of moderate or low quality, or no evidence from systematic reviews. Ways to promote high quality evidence into physiotherapy practice should be identified and evaluated. PMID:18611250

Escaping or connecting? Characteristics of youth who form close online relationships.

PubMed

Wolak, Janis; Mitchell, Kimberly J; Finkelhor, David

2003-02-01

We used data from a US national sample of Internet users, ages 10-17 (N=1501), to explore the characteristics of youth who had formed close relationships with people they met on the Internet (n=210). Girls who had high levels of conflict with parents or were highly troubled were more likely than other girls to have close online relationships, as were boys who had low levels of communication with parents or were highly troubled, compared to other boys. Age, race and aspects of Internet use were also related. We know little about the nature or quality of the close online relationships, but youth with these sorts of problems may be more vulnerable to online exploitation and to other possible ill effects of online relationships. At the same time, these relationships may have helpful aspects.

NaCl-assisted one-step growth of MoS2-WS2 in-plane heterostructures

NASA Astrophysics Data System (ADS)

Wang, Zhan; Xie, Yong; Wang, Haolin; Wu, Ruixue; Nan, Tang; Zhan, Yongjie; Sun, Jing; Jiang, Teng; Zhao, Ying; Lei, Yimin; Yang, Mei; Wang, Weidong; Zhu, Qing; Ma, Xiaohua; Hao, Yue

2017-08-01

Transition metal dichalcogenides (TMDs) have attracted considerable interest for exploration of next-generation electronics and optoelectronics in recent years. Fabrication of in-plane lateral heterostructures between TMDs has opened up excellent opportunities for engineering two-dimensional materials. The creation of high quality heterostructures with a facile method is highly desirable but it still remains challenging. In this work, we demonstrate a one-step growth method for the construction of high-quality MoS2-WS2 in-plane heterostructures. The synthesis was carried out using ambient pressure chemical vapor deposition (APCVD) with the assistance of sodium chloride (NaCl). It was found that the addition of NaCl played a key role in lowering the growth temperatures, in which the Na-containing precursors could be formed and condensed on the substrates to reduce the energy of the reaction. As a result, the growth regimes of MoS2 and WS2 are better matched, leading to the formation of in-plane heterostructures in a single step. The heterostructures were proved to be of high quality with a sharp and clear interface. This newly developed strategy with the assistance of NaCl is promising for synthesizing other TMDs and their heterostructures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Ke; Wang, Xiaoyun; Liu, Jingjing

Highlights: • Cu/In bilayer was fabricated by BMSMW deposition technique. • High quality CIS film was successfully fabricated. • A preferable ratio of Cu:In:S close to 1:1:2 was approached. • The SPV response as high as 6 mV was achieved. - Abstract: High-quality CuInS{sub 2} (CIS) thin films have been fabricated by sulfurization of electrodeposited copper–indium bilayer. A novel bell-like wave modulated square wave (BWMSW) electrodeposition technique is employed for the deposition of copper thin film. Three independent parameters (current or potential, frequency, duty cycle) are available for the BWMSW electrodeposition, which is different from the traditional electrodeposition technique withmore » only one adjustable parameter (current or potential). The influences of deposition parameters such as frequency, duty cycle and the concentration of complexing agent are investigated. Benefited from the high quality copper film obtained by the BWMSW technique, the indium film is electrodeposited successfully on the copper layer to form a compact copper–indium alloy bilayer. After sulfurized at 600 °C for 60 min, the phase pure CIS film is obtained with better crystallinity. The structures, morphologies and optoelectronic properties of the CIS film are also characterized.« less

Rupture testing for the quality control of electrodeposited copper interconnections in high-speed, high-density circuits

NASA Technical Reports Server (NTRS)

Zakraysek, Louis

1987-01-01

Printed Wiring Multilayer Board (PWMLB) structures for high speed, high density circuits are prone to failure due to the microcracking of electrolytic copper interconnections. The failure can occur in the foil that makes up the inner layer traces or in the plated through holes (PTH) deposit that forms the layer to layer interconnections. It is shown that there are some distinctive differences in the quality of Type E copper and that these differences can be detected before its use in a PWMLB. It is suggested that the strength of some Type E copper can be very low when the material is hot and that it is the use of this poor quality material in a PWMLB that results in PTH and inner layer microcracking. Since the PWMLB failure in question are induced by a thermal stress, and since the poorer grades of Type E materials used in these structures are susceptible to premature failure under thermal stress, the use of elevated temperature rupture and creep rupture testing is proposed as a means for screening copper foil, or its PTH equivalent, in order to eliminate the problem of Type E copper microcracking in advanced PWMLBs.

High resolution on-chip optical filter array based on double subwavelength grating reflectors

DOE PAGES

Horie, Yu; Arbabi, Amir; Han, Seunghoon; ...

2015-11-05

An optical filter array consisting of vertical narrow-band Fabry-Pèrot (FP) resonators formed by two highly reflective high contrast subwavelength grating mirrors is reported. The filters are designed to cover a wide range of operation wavelengths ( Δλ/λ=5%) just by changing the in-plane grating parameters while the device thickness is maintained constant. In conclusion, operation in the telecom band with transmission efficiencies greater than 40% and quality factors greater than 1,000 are measured experimentally for filters fabricated on the same substrate.

High resolution on-chip optical filter array based on double subwavelength grating reflectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horie, Yu; Arbabi, Amir; Han, Seunghoon

An optical filter array consisting of vertical narrow-band Fabry-Pèrot (FP) resonators formed by two highly reflective high contrast subwavelength grating mirrors is reported. The filters are designed to cover a wide range of operation wavelengths ( Δλ/λ=5%) just by changing the in-plane grating parameters while the device thickness is maintained constant. In conclusion, operation in the telecom band with transmission efficiencies greater than 40% and quality factors greater than 1,000 are measured experimentally for filters fabricated on the same substrate.

Gold nanoparticle array formation on dimpled Ta templates using pulsed laser-induced thin film dewetting.

PubMed

El-Sayed, Hany A; Horwood, Corie A; Owusu-Ansah, Ebenezer; Shi, Yujun J; Birss, Viola I

2015-04-28

Here we show that pulsed laser-induced dewetting (PLiD) of a thin Au metallic film on a nano-scale ordered dimpled tantalum (DT) surface results in the formation of a high quality Au nanoparticle (NP) array. In contrast to thermal dewetting, PLiD does not result in deformation of the substrate, even when the Au film is heated to above its melting point. PLiD causes local heating of only the metal film and thus thermal oxidation of the Ta substrate can be avoided, also because of the high vacuum (low pO2) environment employed. Therefore, this technique can potentially be used to fabricate NP arrays composed of high melting point metals, such as Pt, not previously possible using conventional thermal annealing methods. We also show that the Au NPs formed by PLiD are more spherical in shape than those formed by thermal dewetting, likely demonstrating a different dewetting mechanism in the two cases. As the metallic NPs formed on DT templates are electrochemically addressable, a longer-term objective of this work is to determine the effect of NP size and shape (formed by laser vs. thermal dewetting) on their electrocatalytic properties.

Best Practices for In-Situ Sediment-Water Incubations with Benthic Landers

NASA Astrophysics Data System (ADS)

Tengberg, Anders; Kononets, Mikhail; Hall, Per; Nilsson, Madeleine; Ekeroth, Nils

2017-04-01

Biological, chemical, physical and geological processes that take place at the seafloor are crucial in influencing and regulating many aquatic environments. One method to estimate exchange rates, fluxes, between the sediment and the overlying water is in-situ sediment-water incubations using autonomous chamber landers. As for all field sampling and measurements best practices methods are needed to obtain high quality data. With experiences form many years usage of the Gothenburg autonomous bottom lander systems this presentation will describe some of the experimental work that has been done with focus on quality control and data evaluation methods.

Study of Air Pollution from Space Using TOMS: Challenges and Promises for Future Missions

NASA Technical Reports Server (NTRS)

Bhartia, Pawan K.

2002-01-01

A series of TOMS instruments built by NASA has flown on US, Russian, and Japanese satellites in the last 24 years. These instruments are well known for producing spectacular maps of the ozone hole that forms over Antarctica each spring. However, it is less well known that these instruments also provided first evidence that space-based measurements in UV of sufficiently high precision and accuracy can provide valuable information to study global air quality. We will use the TOMS experience to highlight the promises and challenges of future space-based missions designed specifically for air quality studies.

Nanolaminate deformable mirrors

DOEpatents

Papavasiliou, Alexandros P.; Olivier, Scot S.

2009-04-14

A deformable mirror formed out of two layers of a nanolaminate foil attached to a stiff substrate is introduced. Deformation is provided by an electrostatic force between two of the layers. The internal stiffness of the structure allows for high-spatial-frequency shapes. The nanolaminate foil of the present invention allows for a high-quality mirror surface. The device achieves high precision in the vertical direction by using foils with accurately controlled thicknesses, but does not require high precision in the lateral dimensions, allowing such mirrors to be fabricated using crude lithography techniques. Such techniques allow structures up to about the meter scale to be fabricated.

The Quality of POLST Completion to Guide Treatment: A 2-State Study.

PubMed

Moss, Alvin H; Zive, Dana M; Falkenstine, Evan C; Dunithan, Courtney

2017-09-01

Physician Orders for Life-Sustaining Treatment (POLST) need to be complete and consistent to allow health care personnel to honor patient preferences in a time of emergency. The purpose of our study was to evaluate the quality of POLST completion to guide treatment for level of medical intervention. This cross-sectional study combined data from the Oregon and West Virginia POLST registries for the study period January 1, 2010, through December 31, 2016. All POLST form resuscitation (section A) and level of medical intervention (section B) orders were reviewed. Percent of POLST form orders in sections A and B with and without contradictions. During the study period, there were 268,386 POLST forms in the Oregon POLST Registry and 10,122 forms in the West Virginia e-Directive Registry. Of the forms, 99.2% in Oregon and 96.6% in West Virginia contained orders in both sections A and B. There were contradictions on 0.11% of forms from Oregon and 2.53% from West Virginia. The quality of POLST form completion in the Oregon and West Virginia registries is good with less than 10% of forms lacking orders in sections A and B and containing contradictory orders. This study indicates what type of results are possible with statewide education, likely through POLST Paradigm Programs. Further research is needed to determine the quality of POLST form completion in other states and other factors that contribute to their quality. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Continuous Spectrum LEDs Promote Seedling Quality Traits and Performance of Quercus ithaburensis var. macrolepis

PubMed Central

Smirnakou, Sonia; Ouzounis, Theoharis; Radoglou, Kalliopi M.

2017-01-01

Regulation of the growth, development, and quality of plants by the control of light quality has attracted extensive attention worldwide. The aim of this study was to examine the effects of continuous LED spectrum for indoor plant pre-cultivation and to investigate the morphological and physiological responses of a common broadleaved tree species in Mediterranean environment, Quercus ithaburensis var. macrolepis at seedling developmental stage. Thus, the seedlings were pre-cultivated for 28 days, under five different LED light qualities: (1) Fluorescent (FL) as control light (2) L20AP67 (high in green and moderate in far-red), (3) AP673L (high in green and red), (4) G2 (highest in red and far-red), AP67 (high in blue, red, and far-red), and (5) NS1 (highest in blue and green and lowest in far-red) LEDs. Further examination was held at the nursery for 1 year, on several seedling quality traits. Indeed, AP67 and AP673L triggered higher leaf formation, while L20AP67 positively affected seedling shoot development. NS1 and AP67 LED pre-cultivated seedlings showed significantly higher root fibrosity than those of FL light. Furthermore, NS1 and AP673L LEDs induced fourfold increase on seedling root dry weight than FL light. Hence, evaluating the seedling nursery performance attributes, most of those photomorphogenetic responses previously obtained were still detectable. Even more so, LED pre-cultivated seedlings showed higher survival and faster growth indicating better adaptation even under natural light conditions, a fact further reinforced by the significantly higher Dickson’s quality index acquired. In conclusion, the goal of each nursery management program is the production of high quality seedlings with those desirable traits, which in turn satisfy the specific needs for a particular reforestation site. Thus, the enhanced oak seedling quality traits formed under continuous LEDs spectrum especially of NS1 and AP673L pre-cultivation may potentially fulfill this goal. PMID:28261244

Advanced techniques and technology for efficient data storage, access, and transfer

NASA Technical Reports Server (NTRS)

Rice, Robert F.; Miller, Warner

1991-01-01

Advanced techniques for efficiently representing most forms of data are being implemented in practical hardware and software form through the joint efforts of three NASA centers. These techniques adapt to local statistical variations to continually provide near optimum code efficiency when representing data without error. Demonstrated in several earlier space applications, these techniques are the basis of initial NASA data compression standards specifications. Since the techniques clearly apply to most NASA science data, NASA invested in the development of both hardware and software implementations for general use. This investment includes high-speed single-chip very large scale integration (VLSI) coding and decoding modules as well as machine-transferrable software routines. The hardware chips were tested in the laboratory at data rates as high as 700 Mbits/s. A coding module's definition includes a predictive preprocessing stage and a powerful adaptive coding stage. The function of the preprocessor is to optimally process incoming data into a standard form data source that the second stage can handle.The built-in preprocessor of the VLSI coder chips is ideal for high-speed sampled data applications such as imaging and high-quality audio, but additionally, the second stage adaptive coder can be used separately with any source that can be externally preprocessed into the 'standard form'. This generic functionality assures that the applicability of these techniques and their recent high-speed implementations should be equally broad outside of NASA.

Exploring the limits of frequency lowering

PubMed Central

Souza, Pamela E.; Arehart, Kathryn H.; Kates, James M.; Croghan, Naomi B.H.; Gehani, Namita

2013-01-01

Objective This study examined how frequency lowering affected sentence intelligibility and quality, for adults with postlingually acquired, mild-to-moderate hearing loss. Method Listeners included adults aged 60–92 years with sloping sensorineural loss and a control group of similarly-aged adults with normal hearing. Sentences were presented in quiet and babble at a range of signal-to-noise ratios. Intelligibility and quality were measured with varying amounts of frequency lowering, implemented using a form of frequency compression. Results Moderate amounts of compression, particularly with high cutoff frequencies, had minimal effects on intelligibility. Listeners with the greatest high-frequency hearing loss showed the greatest benefit. Sentence intelligibility decreased with more compression. Listeners were more affected by a given set of parameters in noise. In quiet, any amount of compression resulted in lower speech quality for most listeners, with the greatest degradation for listeners with better high-frequency hearing. Quality ratings were lower with background noise, and in noise the effect of changing compression parameters was small. Conclusions The benefits of frequency lowering in adults were affected by the compression parameters as well as individual hearing thresholds. Data are consistent with the idea that frequency lowering can be viewed in terms of an improved audibility vs increased distortion tradeoff. PMID:23785188

Development of Moire machine vision

NASA Technical Reports Server (NTRS)

Harding, Kevin G.

1987-01-01

Three dimensional perception is essential to the development of versatile robotics systems in order to handle complex manufacturing tasks in future factories and in providing high accuracy measurements needed in flexible manufacturing and quality control. A program is described which will develop the potential of Moire techniques to provide this capability in vision systems and automated measurements, and demonstrate artificial intelligence (AI) techniques to take advantage of the strengths of Moire sensing. Moire techniques provide a means of optically manipulating the complex visual data in a three dimensional scene into a form which can be easily and quickly analyzed by computers. This type of optical data manipulation provides high productivity through integrated automation, producing a high quality product while reducing computer and mechanical manipulation requirements and thereby the cost and time of production. This nondestructive evaluation is developed to be able to make full field range measurement and three dimensional scene analysis.

Technology development of fabrication techniques for advanced solar dynamic concentrators

NASA Technical Reports Server (NTRS)

Richter, Scott W.

1991-01-01

The objective of the advanced concentrator program is to develop the technology that will lead to lightweight, highly reflective, accurate, scaleable, and long lived space solar dynamic concentrators. The advanced concentrator program encompasses new and innovative concepts, fabrication techniques, materials selection, and simulated space environmental testing. Fabrication techniques include methods of fabricating the substrates and coating substrate surfaces to produce high quality optical surfaces, acceptable for further coating with vapor deposited optical films. The selected materials to obtain a high quality optical surface include microsheet glass and Eccocoat EP-3 epoxy, with DC-93-500 selected as a candidate silicone adhesive and levelizing layer. The following procedures are defined: cutting, cleaning, forming, and bonding microsheet glass. Procedures are also defined for surface cleaning, and EP-3 epoxy application. The results and analyses from atomic oxygen and thermal cycling tests are used to determine the effects of orbital conditions in a space environment.

3D reconstruction from multi-view VHR-satellite images in MicMac

NASA Astrophysics Data System (ADS)

Rupnik, Ewelina; Pierrot-Deseilligny, Marc; Delorme, Arthur

2018-05-01

This work addresses the generation of high quality digital surface models by fusing multiple depths maps calculated with the dense image matching method. The algorithm is adapted to very high resolution multi-view satellite images, and the main contributions of this work are in the multi-view fusion. The algorithm is insensitive to outliers, takes into account the matching quality indicators, handles non-correlated zones (e.g. occlusions), and is solved with a multi-directional dynamic programming approach. No geometric constraints (e.g. surface planarity) or auxiliary data in form of ground control points are required for its operation. Prior to the fusion procedures, the RPC geolocation parameters of all images are improved in a bundle block adjustment routine. The performance of the algorithm is evaluated on two VHR (Very High Resolution)-satellite image datasets (Pléiades, WorldView-3) revealing its good performance in reconstructing non-textured areas, repetitive patterns, and surface discontinuities.

Fabrication and transport property of artificial structure of CNTs using SPM nano-manipulation

NASA Astrophysics Data System (ADS)

Maejima, K.; Kida, M.; Yaguchi, Y.; Sudo, K.; Kawamura, T.; Morimoto, T.; Aoki, N.; Ochiai, Y.

2007-04-01

We have established a novel manipulation technique using a glass-micro capillary under a high-resolution CCD microscope so far. Two isolated multi-wall carbon nanotubes (MWNTs) are settled to form a well-aligned cross structure. Recently, we have tried to develop a fine manipulation system using a scanning probe microscope with a silicon cantilever. Therefore, thinner high-quality MWNTs (˜10 nm in diameter) can be utilized in this system. At the junction, we have observed weak localization and Fano-like-effect, zero bias anomaly whose traces were visible even at room temperature with thick MWNTs (˜100 nm in diameter). On the other hand, with thinner high-quality MWNTs (˜10 nm in diameter), we have observed also anomalous I-V characteristic and Altshuler-Aronov-Spivak-like magneto-oscillations at low temperature in the nano-space transport.

Controlled assembly of graphene-capped nickel, cobalt and iron silicides

PubMed Central

Vilkov, O.; Fedorov, A.; Usachov, D.; Yashina, L. V.; Generalov, A. V.; Borygina, K.; Verbitskiy, N. I.; Grüneis, A.; Vyalikh, D. V.

2013-01-01

The unique properties of graphene have raised high expectations regarding its application in carbon-based nanoscale devices that could complement or replace traditional silicon technology. This gave rise to the vast amount of researches on how to fabricate high-quality graphene and graphene nanocomposites that is currently going on. Here we show that graphene can be successfully integrated with the established metal-silicide technology. Starting from thin monocrystalline films of nickel, cobalt and iron, we were able to form metal silicides of high quality with a variety of stoichiometries under a Chemical Vapor Deposition grown graphene layer. These graphene-capped silicides are reliably protected against oxidation and can cover a wide range of electronic materials/device applications. Most importantly, the coupling between the graphene layer and the silicides is rather weak and the properties of quasi-freestanding graphene are widely preserved. PMID:23835625

Development of Moire machine vision

NASA Astrophysics Data System (ADS)

Harding, Kevin G.

1987-10-01

Three dimensional perception is essential to the development of versatile robotics systems in order to handle complex manufacturing tasks in future factories and in providing high accuracy measurements needed in flexible manufacturing and quality control. A program is described which will develop the potential of Moire techniques to provide this capability in vision systems and automated measurements, and demonstrate artificial intelligence (AI) techniques to take advantage of the strengths of Moire sensing. Moire techniques provide a means of optically manipulating the complex visual data in a three dimensional scene into a form which can be easily and quickly analyzed by computers. This type of optical data manipulation provides high productivity through integrated automation, producing a high quality product while reducing computer and mechanical manipulation requirements and thereby the cost and time of production. This nondestructive evaluation is developed to be able to make full field range measurement and three dimensional scene analysis.

Can editors save peer review from peer reviewers?

PubMed

D'Andrea, Rafael; O'Dwyer, James P

2017-01-01

Peer review is the gold standard for scientific communication, but its ability to guarantee the quality of published research remains difficult to verify. Recent modeling studies suggest that peer review is sensitive to reviewer misbehavior, and it has been claimed that referees who sabotage work they perceive as competition may severely undermine the quality of publications. Here we examine which aspects of suboptimal reviewing practices most strongly impact quality, and test different mitigating strategies that editors may employ to counter them. We find that the biggest hazard to the quality of published literature is not selfish rejection of high-quality manuscripts but indifferent acceptance of low-quality ones. Bypassing or blacklisting bad reviewers and consulting additional reviewers to settle disagreements can reduce but not eliminate the impact. The other editorial strategies we tested do not significantly improve quality, but pairing manuscripts to reviewers unlikely to selfishly reject them and allowing revision of rejected manuscripts minimize rejection of above-average manuscripts. In its current form, peer review offers few incentives for impartial reviewing efforts. Editors can help, but structural changes are more likely to have a stronger impact.

Doses effects of zoledronic acid on mineral apatite and collagen quality of newly-formed bone in the rat's calvaria defect.

PubMed

Olejnik, Cécile; Falgayrac, Guillaume; During, Alexandrine; Cortet, Bernard; Penel, Guillaume

2016-08-01

Due to their inhibitory effects on resorption, bisphosphonates are widely used in the treatment of diseases associated to an extensive bone loss. Yet, little is known about bisphosphonates effects on newly-formed bone quality. In the present study, adult male Sprague-Dawley rats (n=80) with a bone defect calvaria area were used and short-term effects of zoledronic acid (ZA) were studied on the healing bone area. Three ZA treatments were tested by using either: 1°) a low single dose (120μgZA/kg, n=10; equivalent to human osteoporosis treatment), 2°) a low fractionated doses (20μgZA/kg daily for 6days either a total of 120μg/kg, n=15), and 3°) a high fractionated doses, (100μgZA/kg weekly for 6weeks, n=15; equivalent to 6months of human bone metastasis treatment). For each treatment, a control "vehicle" treatment was performed (with an identical number of rats). After ZA administration, the intrinsic bone material properties were evaluated by quantitative backscattered electron imaging (qBEI) and Raman microspectroscopy. Neither single nor fractionated low ZA doses modify the intrinsic bone material properties of the newly-formed bone compared to their respective control animals. On the opposite, the high ZA treatment resulted in a significant decrease of the crystallinity (-25%, P< 0.05) and of the hydroxyproline-to-proline ratio (-30%, P<0.05) in newly-formed bones. Moreover, with the high ZA treatment, the crystallinity was positively correlated with the hydroxyproline-to-proline ratio (ρ=0.78, P<0.0001). The present data highlight new properties for ZA on bone formation in a craniofacial defect model. As such, ZA at high doses disrupted the apatite crystal organization. In addition, we report here for the first time that high ZA doses decreased the hydroxyproline-to-proline ratio suggesting that ZA may affect the early collagen organization during the bone healing. Copyright © 2016 Elsevier Inc. All rights reserved.

Impact of instructional Approaches to Teaching Elementary Science on Student Achievement

NASA Astrophysics Data System (ADS)

Kensinger, Seth H.

Strengthening our science education in the United States is essential to the future success of our country in the global marketplace. Immersing our elementary students with research-based quality science instruction is a critical component to build a strong foundation and motivate our students to become interested in science. The research for this study pertained to the type of elementary science instruction in correlation to academic achievement and gender. Through this study, the researcher answered the following questions: 1. What is the difference in achievement for elementary students who have been taught using one of the three science instructional approaches analyzed in this study: traditional science instruction, inquiry-based science instruction with little or no professional development and inquiry-based science instruction with high-quality professional development? 2. What is the difference in student achievement between inquiry-based instruction and non-inquiry based (traditional) instruction? 3. What is the difference in student achievement between inquiry with high quality professional development and inquiry with little or no professional development? 4. Do the three instructional approaches have differentiated effects across gender? The student achievement was measured using the 2010 fourth grade Pennsylvania System of School Assessment (PSSA) in Science. Data was collected from 15 elementary schools forming three main groupings of similar schools based on the results from the 2009 third grade PSSA in Mathematics and student and community demographics. In addition, five sub-group triads were formed to further analyze the data and each sub-group was composed of schools with matching demographic data. Each triad contained a school using a traditional approach to teaching science, a school utilizing an inquiry science approach with little or no professional development, and a school incorporating inquiry science instruction with high quality professional development. The five schools which provided its students with inquiry science and high quality professional development were Science Its Elementary (SIE) schools, as provided through a grant from the Pennsylvania Department of Education (PDE). The findings of the study indicated that there is evidence to suggest that elementary science achievement improves significantly when teachers have utilized inquiry instruction after receiving high-quality professional development. Specifically, the analysis of the whole group and the majority of the triad sub-groupings did result in a consistent trend to support science instruction utilizing inquiry with high-quality professional development compared to a traditional approach and an inquiry-based approach with little or no professional development. The gender analysis of this study focused on whether or not girls at the elementary school level would perform better than boys depending upon method of science instruction. The study revealed no relationship between approach to teaching science and achievement level based on gender. The whole group results and sub-group triads produced no significant findings for this part of the data analysis.

Fruit flies may face a nutrient-dependent life-history trade-off between secondary sexual trait quality, survival and developmental rate.

PubMed

Gray, Lindsey J; Simpson, Stephen J; Polak, Michal

2018-01-01

Optimal life-history strategies are those that best allocate finite environmental resources to competing traits. We used the geometric framework for nutrition to evaluate life-history strategies followed by Drosophila melanogaster by measuring the condition-dependent performance of life-history traits, including the morphology of male secondary sexual characters, sex combs. We found that depending on their rearing environment flies faced different forms of trait trade-offs and accordingly followed different life-history strategies. High-energy, high-carbohydrate, low-protein diets supported development of the largest and most symmetrical sex combs, however, consistent with handicap models of sexual selection these foods were associated with reduced fly survival and developmental rate. Expressing the highest quality sex combs may have required secondary sexual trait quality to be traded-off with developmental rate, and our results indicated that flies unable to slow development died. As larval nutritional environments are predominantly determined by female oviposition substrate choice, we tested where mated female flies laid the most eggs. Mothers chose high-energy, high-protein foods associated with rapid larval development. Mothers avoided high-carbohydrate foods associated with maximal sex comb expression, showing they may avoid producing fewer 'sexy' sons in favour of producing offspring that develop rapidly. Copyright © 2017 Elsevier Ltd. All rights reserved.

Bees Algorithm for Construction of Multiple Test Forms in E-Testing

ERIC Educational Resources Information Center

Songmuang, Pokpong; Ueno, Maomi

2011-01-01

The purpose of this research is to automatically construct multiple equivalent test forms that have equivalent qualities indicated by test information functions based on item response theory. There has been a trade-off in previous studies between the computational costs and the equivalent qualities of test forms. To alleviate this problem, we…

Method to produce large, uniform hollow spherical shells

DOEpatents

Hendricks, C.D.

1983-09-26

The invention is a method to produce large uniform hollow spherical shells by (1) forming uniform size drops of heat decomposable or vaporizable material, (2) evaporating the drops to form dried particles, (3) coating the dried particles with a layer of shell forming material and (4) heating the composite particles to melt the outer layer and to decompose or vaporize the inner particle to form an expanding inner gas bubble. The expanding gas bubble forms the molten outer layer into a shell of relatively large diameter. By cycling the temperature and pressure on the molten shell, nonuniformities in wall thickness can be reduced. The method of the invention is utilized to produce large uniform spherical shells, in the millimeter to centimeter diameter size range, from a variety of materials and of high quality, including sphericity, concentricity and surface smoothness, for use as laser fusion or other inertial confinement fusion targets as well as other applications.

Quality of life and physical activity in an older working-age population.

PubMed

Puciato, Daniel; Borysiuk, Zbigniew; Rozpara, Michał

2017-01-01

Physical activity can be an effective means of prevention and therapy of many psychosomatic disorders. It can also have a significant impact on the quality of life of older working-age people. The aim of the present study was to assess the relationships between quality of life and physical activity in older working-age people from Wrocław, Poland. The study group comprised 1,013 people, including 565 women and 448 men, aged 55-64 years (59.1±2.9 years). The study took form of a questionnaire survey. The participants assessed their physical activity and quality of life using the International Physical Activity Questionnaire Short Version (IPAQ-SF) and the World Health Organization Quality of Life (WHOQOL-BREF), respectively. The highest mean indices of general quality of life, perceived health status, and quality of life in the physical, psychological, social, and environmental domains were shown by respondents whose intensity of physical activity was the highest. Moreover, the odds of high assessment of overall quality of life increased with respondents' higher levels of physical activity. Quality of life improvement programs should also involve increased physical activity components.

Quality of life and physical activity in an older working-age population

PubMed Central

Puciato, Daniel; Borysiuk, Zbigniew; Rozpara, Michał

2017-01-01

Objective Physical activity can be an effective means of prevention and therapy of many psychosomatic disorders. It can also have a significant impact on the quality of life of older working-age people. The aim of the present study was to assess the relationships between quality of life and physical activity in older working-age people from Wrocław, Poland. Materials and methods The study group comprised 1,013 people, including 565 women and 448 men, aged 55–64 years (59.1±2.9 years). The study took form of a questionnaire survey. The participants assessed their physical activity and quality of life using the International Physical Activity Questionnaire Short Version (IPAQ-SF) and the World Health Organization Quality of Life (WHOQOL-BREF), respectively. Results The highest mean indices of general quality of life, perceived health status, and quality of life in the physical, psychological, social, and environmental domains were shown by respondents whose intensity of physical activity was the highest. Moreover, the odds of high assessment of overall quality of life increased with respondents’ higher levels of physical activity. Conclusion Quality of life improvement programs should also involve increased physical activity components. PMID:29042763

Virtual groups for patient WBAN monitoring in medical environments.

PubMed

Ivanov, Stepan; Foley, Christopher; Balasubramaniam, Sasitharan; Botvich, Dmitri

2012-11-01

Wireless body area networks (WBAN) provide a tremendous opportunity for remote health monitoring. However, engineering WBAN health monitoring systems encounters a number of challenges including efficient WBAN monitoring information extraction, dynamically fine tuning the monitoring process to suit the quality of data, and to allow the translation of high-level requirements of medical officers to low-level sensor reconfiguration. This paper addresses these challenges, by proposing an architecture that allows virtual groups to be formed between devices of patients, nurses, and doctors in order to enable remote analysis of WBAN data. Group formation and modification is performed with respect to patients' conditions and medical officers' requirements, which could be easily adjusted through high-level policies. We also propose, a new metric called the Quality of Health Monitoring, which allows medical officers to provide feedback on the quality of WBAN data received. The WBAN data gathered are transmitted to the virtual group members through an underlying environmental sensor network. The proposed approach is evaluated through a series of simulation.

Effect of high pressure processing on textural and microbiological quality of pink perch (Nemipterus japonicus) sausage during chilled storage

NASA Astrophysics Data System (ADS)

Kunnath, Sarika; Panda, Satyen Kumar; Jaganath, Bindu; Gudipati, Venkateshwarlu

2015-10-01

The non-thermal high pressure (HP) processing was studied on fish sausage to enhance the quality during chilled storage. Pink perch (Nemipterus japonicus) sausages, packed in poly amide casing under vacuum were subjected to 400, 500 and 600 MPa pressures (dwell time: 10 min and ramp rate: 300 MPa/min) and compared with heat-set samples for physico-chemical and microbial quality parameters. Pressurized samples formed softer and glossier gels with a slight reduction in water-holding capacity. HP made the texture of sausage softer, cohesive and less chewy and gummier than heat-treated ones. Folding test seen higher acceptance values in samples treated at 500 and 600 MPa, during storage. Maximum log reduction in microbial count was observed in 600 MPa immediately, and significant difference in cooked and pressurized sausages was seen only up to 7th day. This revealed the potential application of HP in replacing conventional heat treatment for sausages preparation with enhanced shelf-life.

Document segmentation for high-quality printing

NASA Astrophysics Data System (ADS)

Ancin, Hakan

1997-04-01

A technique to segment dark texts on light background of mixed mode color documents is presented. This process does not perceptually change graphics and photo regions. Color documents are scanned and printed from various media which usually do not have clean background. This is especially the case for the printouts generated from thin magazine samples, these printouts usually include text and figures form the back of the page, which is called bleeding. Removal of bleeding artifacts improves the perceptual quality of the printed document and reduces the color ink usage. By detecting the light background of the document, these artifacts are removed from background regions. Also detection of dark text regions enables the halftoning algorithms to use true black ink for the black text pixels instead of composite black. The processed document contains sharp black text on white background, resulting improved perceptual quality and better ink utilization. The described method is memory efficient and requires a small number of scan lines of high resolution color documents during processing.

The mechanical properties of high speed GTAW weld and factors of nonlinear multiple regression model under external transverse magnetic field

NASA Astrophysics Data System (ADS)

Lu, Lin; Chang, Yunlong; Li, Yingmin; He, Youyou

2013-05-01

A transverse magnetic field was introduced to the arc plasma in the process of welding stainless steel tubes by high-speed Tungsten Inert Gas Arc Welding (TIG for short) without filler wire. The influence of external magnetic field on welding quality was investigated. 9 sets of parameters were designed by the means of orthogonal experiment. The welding joint tensile strength and form factor of weld were regarded as the main standards of welding quality. A binary quadratic nonlinear regression equation was established with the conditions of magnetic induction and flow rate of Ar gas. The residual standard deviation was calculated to adjust the accuracy of regression model. The results showed that, the regression model was correct and effective in calculating the tensile strength and aspect ratio of weld. Two 3D regression models were designed respectively, and then the impact law of magnetic induction on welding quality was researched.

Flying qualities and control system characteristics for superaugmented aircraft

NASA Technical Reports Server (NTRS)

Myers, T. T.; Mcruer, D. T.; Johnston, D. E.

1984-01-01

Aircraft-alone dynamics and superaugmented control system fundamental regulatory properties including stability and regulatory responses of the basic closed-loop systems; fundamental high and low frequency margins and governing factors; and sensitivity to aircraft and controller parameters are addressed. Alternative FCS mechanizations, and mechanizational side effects are also discussed. An overview of flying qualities considerations encompasses general pilot operations as a controller in unattended, intermittent and trim, and full-attention regulatory or command control; effective vehicle primary and secondary response properties to pilot inputs and disturbances; pilot control architectural possibilities; and comparison of superaugmented and conventional aircraft path responses for different forms of pilot control. Results of a simple experimental investigation into pilot dynamic behavior in attitude control of superaugmented aircraft configurations with high frequency time laps and time delays are presented.

75 FR 39696 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-12

...; Title of Information Collection: QualityNet Identity Management System (QIMS) Account Form; Use: The QualityNet Identity Management System (QIMS) account registration form must be completed by any new...

Impacts of extreme flooding on riverbank filtration water quality.

PubMed

Ascott, M J; Lapworth, D J; Gooddy, D C; Sage, R C; Karapanos, I

2016-06-01

Riverbank filtration schemes form a significant component of public water treatment processes on a global level. Understanding the resilience and water quality recovery of these systems following severe flooding is critical for effective water resources management under potential future climate change. This paper assesses the impact of floodplain inundation on the water quality of a shallow aquifer riverbank filtration system and how water quality recovers following an extreme (1 in 17 year, duration >70 days, 7 day inundation) flood event. During the inundation event, riverbank filtrate water quality is dominated by rapid direct recharge and floodwater infiltration (high fraction of surface water, dissolved organic carbon (DOC) >140% baseline values, >1 log increase in micro-organic contaminants, microbial detects and turbidity, low specific electrical conductivity (SEC) <90% baseline, high dissolved oxygen (DO) >400% baseline). A rapid recovery is observed in water quality with most floodwater impacts only observed for 2-3 weeks after the flooding event and a return to normal groundwater conditions within 6 weeks (lower fraction of surface water, higher SEC, lower DOC, organic and microbial detects, DO). Recovery rates are constrained by the hydrogeological site setting, the abstraction regime and the water quality trends at site boundary conditions. In this case, increased abstraction rates and a high transmissivity aquifer facilitate rapid water quality recoveries, with longer term trends controlled by background river and groundwater qualities. Temporary reductions in abstraction rates appear to slow water quality recoveries. Flexible operating regimes such as the one implemented at this study site are likely to be required if shallow aquifer riverbank filtration systems are to be resilient to future inundation events. Development of a conceptual understanding of hydrochemical boundaries and site hydrogeology through monitoring is required to assess the suitability of a prospective riverbank filtration site. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Si/Ge Junctions Formed by Nanomembrane Bonding

DTIC Science & Technology

2011-01-01

hydrophobic bonding of a 200 nm thick 14. ABSTRACT monocrystalline Si(001) membrane to a bulk Ge(001) wafer. The membrane bond has an extremely high...temperature hydrophobic bonding of a 200 nm thick monocrystalline Si(001) membrane to a bulk Ge(001) wafer. The membrane bond has an extremely high quality...them. A RTIC LE KIEFER ET AL. VOL. 5 ’ NO. 2 ’ 1179–1189 ’ 2011 1182 www.acsnano.org monocrystalline . The interfacial region appears to be amorphous

Oxynitride glass production procedure

DOEpatents

Weidner, Jerry R.; Schuetz, Stanley T.; O'Brien, Michael H.

1991-01-01

The invention is a process for the preparation of high quality oxynitride glasses without resorting to high pressures. Nitrogen-containing compounds such as Si.sub.3 N.sub.4 are first encapsulated in a low melting temperature glass. Particles of the encapsulated nitrogen-containing compound are mixed with other oxide glass-formers and melted in an atmosphere of flowing nitrogen and in the presence of buffering gas to form the oxynitride glass. Glasses containing up to 15 at % nitrogen have been prepared by this method.

Synthesis of freeform refractive surfaces forming various radiation patterns using interpolation

NASA Astrophysics Data System (ADS)

Voznesenskaya, Anna; Mazur, Iana; Krizskiy, Pavel

2017-09-01

Optical freeform surfaces are very popular today in such fields as lighting systems, sensors, photovoltaic concentrators, and others. The application of such surfaces allows to obtain systems with a new quality with a reduced number of optical components to ensure high consumer characteristics: small size, weight, high optical transmittance. This article presents the methods of synthesis of refractive surface for a given source and the radiation pattern of various shapes using a computer simulation cubic spline interpolation.

Three-Dimensional Intercalated Porous Graphene on Si(111)

NASA Astrophysics Data System (ADS)

Pham, Trung T.; Sporken, Robert

2018-02-01

Three-dimensional intercalated porous graphene has been formed on Si(111) by electron beam evaporation under appropriate conditions and its structural and electronic properties investigated in detail by reflection high-energy electron diffraction, x-ray photoemission spectroscopy, Raman spectroscopy, high-resolution scanning electron microscopy, atomic force microscopy, and scanning tunneling microscopy. The results show that the crystalline quality of the porous graphene depended not only on the substrate temperature but also on the SiC layer thickness during carbon atom deposition.

The influence of concrete mixture’s rheological properties on the quality of formed concrete surfaces

NASA Astrophysics Data System (ADS)

Daukšys, M.; Klovas, A.; Venčkauskas, L.

2017-09-01

This study mainly lays emphasis on examining the influence of concrete mixture rheological properties on the quality of formed concrete surfaces. Mixture’s fine aggregate change was taken into the consideration. Over the course of concrete mixture preparation the inner ratio of fine aggregate (sand: fraction of 0/1 and 0/4) was changed. The idea was to increase the quantity of fine particles in the total aggregate’s volume therefore quantity of sand (fraction 0/1) was increased. Six different concrete mixture’s compositions were designed as well as three specimens (concrete piles of 1m2 surface area) were casted. Rheological properties of concrete mixtures were analytically obtained and the quality of formed concrete surfaces was evaluated using image analysis method “BetonGUY 2.0”. As can be obtained from the dependence between concrete mixture rheological properties and its formed surface quality, the increase of concrete mixture’s yield stress and plastic viscosity reduces the quantity of air pores on formed concrete surfaces.

Aquatic therapy improves pain, disability, quality of life, body composition and fitness in sedentary adults with chronic low back pain. A controlled clinical trial.

PubMed

Baena-Beato, Pedro Ángel; Artero, Enrique G; Arroyo-Morales, Manuel; Robles-Fuentes, Alejandro; Gatto-Cardia, María Claudia; Delgado-Fernández, Manuel

2014-04-01

To determine the effects of a two-month intensive aquatic therapy programme on back pain, disability, quality of life, body composition and health-related fitness in sedentary adults with chronic low back pain. Controlled clinical trial. Community. Forty-nine sedentary patients with chronic low back pain. Patients were allocated into active group (n = 24, two months, five times/week) or waiting list, control group (n = 25) according to space on the programme. Outcomes variables were pain (visual analogue scale), disability (Oswestry Disability Index), quality of life (Quality Short-Form Health Survey 36), body composition (weight, body mass index, body fat percentage and skeletal muscle mass) and health-related fitness (sit-and-reach, handgrip strength, curl-up, Rockport 1-mile test). The active group significantly improved low back pain (-3.83 ± 0.35 mm on the visual analogue scale ), disability (-12.7 ± 1.3 points for the Oswestry Disability Index) and the standardized physical component (10.3 ± 1.4 points for the Quality Short-Form Health Survey 36) of quality-of-life domains (P < 0.001), with no significant changes on the standardized mental component (P = 0.114). In relation to body composition and fitness, the active group showed significant improvements (all P-values < 0.01). The control group presented no significant change in any parameter. A two-month intensive aquatic therapy programme of high-frequency (five times/week) decreases levels of back pain and disability, increases quality of life, and improves body composition and health-related fitness in sedentary adults with chronic low back pain.

Organoleptic damage classification of potatoes with the use of image analysis in production process

NASA Astrophysics Data System (ADS)

Przybył, K.; Zaborowicz, M.; Koszela, K.; Boniecki, P.; Mueller, W.; Raba, B.; Lewicki, A.

2014-04-01

In the agro-food sector security it is required the safety of a healthy food. Therefore, the farms are inspected by the quality standards of production in all sectors of production. Farms must meet the requirements dictated by the legal regulations in force in the European Union. Currently, manufacturers are seeking to make their food products have become unbeatable. This gives you the chance to form their own brand on the market. In addition, they use technologies that can increase the scale of production. Moreover, in the manufacturing process they tend to maintain a high level of quality of their products. Potatoes may be included in this group of agricultural products. Potatoes have become one of the major and popular edible plants. Globally, potatoes are used for consumption at 60%, Poland 40%. This is due to primarily advantages, consumer and nutritional qualities. Potatoes are easy to digest. Medium sized potato bigger than 60 mm in diameter contains only about 60 calories and very little fat. Moreover, it is the source of many vitamins such as vitamin C, vitamin B1, vitamin B2, vitamin E, etc. [1]. The parameters of quality consumer form, called organoleptic sensory properties, are evaluated by means of sensory organs by using the point method. The most important are: flavor, flesh color, darkening of the tuber flesh when raw and after cooking. In the production process it is important to adequate, relevant and accurate preparing potatoes for use and sale. Evaluation of the quality of potatoes is determined on the basis of organoleptic quality standards for potatoes. Therefore, there is a need to automate this process. To do this, use the appropriate tools, image analysis and classification models using artificial neural networks that will help assess the quality of potatoes [2, 3, 4].

Hope, Coping, and Quality of Life in Adults with Myasthenia Gravis.

PubMed

Koopman, Wilma J; LeBlanc, Nicole; Fowler, Sue; Nicolle, Michael W; Hulley, Denise

2016-01-01

Myasthenia gravis significantly impacts quality of life. However, the relationship between hope, coping, and quality of life (QOL)in myasthenia patients has not been studied (Kulkantrakorn & Jarungkiatkul, 2009; Raggi et al., 2010). The aim of this study was to explore the relationship between hope, coping, and quality of life in adults with myasthenia gravis. Subjects with MG (n = 100) completed six questionnaires, including a demographic profile, the Myasthenia Gravis Activities of Daily Living Scale (MG-ADL), Herth Hope Index (HHI), Jalowiec Coping Scale (JCS), Myasthenia Gravis Quality-of-Life Scale (MG-QOL15), and Short Form Health Survey (SF-36v2). Mean hope scores indicated a high level of hope. An optimistic coping style was the most common and effective coping strategy identified by subjects. Positive thinking and humour were also frequently used strategies. Participants identified quality of life as good tolerability, above general population mental well-being, and below general populationphysical well-being. Participants who identified good quality of life had low scores on the MG-QOL15 scale and high scores on the SF36v2. Hope and independence for activities of daily living were found to correlate with improved quality of life and mental well-being(p < 0.001). Age and length of illness were not significant factors. There was no mediation by well-being or quality of life in the relationship between hope and coping. Hope and coping were not important factors for well-being or quality of life. Nurses caring for adults with myasthenia gravis should use interventions that continue to support hope, quality of life, and coping throughout the unpredictable and chronic course of MG.

Reproductive investment when mate quality varies: differential allocation versus reproductive compensation.

PubMed

Harris, W Edwin; Uller, Tobias

2009-04-27

Reproductive investment decisions form an integral part of life-history biology. Selection frequently favours plasticity in investment that can generate maternal effects on offspring development. For example, if females differentially allocate resources based on mate attractiveness or quality, this can create a non-genetic link between mate attractiveness and offspring fitness with potential consequences for ecological and evolutionary dynamics. It is therefore important to understand under what conditions differential investment into offspring in relation to male quality is expected to occur and the direction of the effect. Two opposite predictions, increased investment into offspring produced with high-quality mates (differential allocation (DA)) and increased investment with low-quality males (reproductive compensation (RC)) have been suggested but no formal theoretical treatment justifying the assumptions underlying these two hypotheses has been conducted to date. Here, we used a state-based approach to investigate the circumstances under which the variation in mate quality results in differential female investment into offspring and how this interacts with female energetic resource levels. We found that a pattern of increased investment when mating with high-quality mates (i.e. DA) was the most common optimal investment strategy for females in our model. By contrast, increased investment when mating with low-quality mates (i.e. RC) was predicted only when the relative impact of parental investment on offspring quality was low. Finally, we found that the specific pattern of investment in relation to male quality depends on female energetic state, the likelihood for future mating opportunities and the expected future distribution of mate quality. Thus, the female's age and body condition should be important factors mediating DA and RC, which may help to explain the equivocal results of empirical studies.

Different in the dark: The effect of habitat characteristics on community composition and beta diversity in bromeliad microfauna.

PubMed

Busse, Annika; Antiqueira, Pablo A P; Neutzling, Alexandre S; Wolf, Anna M; Romero, Gustavo Q; Petermann, Jana S

2018-01-01

The mechanisms which structure communities have been the focus of a large body of research. Here, we address the question if habitat characteristics describing habitat quality may drive changes in community composition and beta diversity of bromeliad-inhabiting microfauna. In our system, changes in canopy cover along an environmental gradient may affect resource availability, disturbance in form of daily water temperature fluctuations and predation, and thus may lead to changes in community structure of bromeliad microfauna through differences in habitat quality along this gradient. Indeed, we observed distinct changes in microfauna community composition along the environmental gradient explained by changes in the extent of daily water temperature fluctuations. We found beta diversity to be higher under low habitat quality (low canopy cover) than under high habitat quality (high canopy cover), which could potentially be explained by a higher relative importance of stochastic processes under low habitat quality. We also partitioned beta diversity into turnover and nestedness components and we found a nested pattern of beta diversity along the environmental gradient, with communities from the lower-quality habitat being nested subsets of communities from the higher-quality habitat. However, this pattern resulted from an increase in microfauna alpha diversity with an increase in habitat quality. By providing insights into microfauna-environment relationships our results contribute to the mechanistic understanding of community dynamics in small freshwater bodies. Here, we highlight the importance of habitat characteristics representing habitat quality in structuring communities, and suggest that this information may help to improve conservation practices of small freshwater ecosystems.

Different in the dark: The effect of habitat characteristics on community composition and beta diversity in bromeliad microfauna

PubMed Central

Antiqueira, Pablo A. P.; Neutzling, Alexandre S.; Wolf, Anna M.; Romero, Gustavo Q.; Petermann, Jana S.

2018-01-01

The mechanisms which structure communities have been the focus of a large body of research. Here, we address the question if habitat characteristics describing habitat quality may drive changes in community composition and beta diversity of bromeliad-inhabiting microfauna. In our system, changes in canopy cover along an environmental gradient may affect resource availability, disturbance in form of daily water temperature fluctuations and predation, and thus may lead to changes in community structure of bromeliad microfauna through differences in habitat quality along this gradient. Indeed, we observed distinct changes in microfauna community composition along the environmental gradient explained by changes in the extent of daily water temperature fluctuations. We found beta diversity to be higher under low habitat quality (low canopy cover) than under high habitat quality (high canopy cover), which could potentially be explained by a higher relative importance of stochastic processes under low habitat quality. We also partitioned beta diversity into turnover and nestedness components and we found a nested pattern of beta diversity along the environmental gradient, with communities from the lower-quality habitat being nested subsets of communities from the higher-quality habitat. However, this pattern resulted from an increase in microfauna alpha diversity with an increase in habitat quality. By providing insights into microfauna-environment relationships our results contribute to the mechanistic understanding of community dynamics in small freshwater bodies. Here, we highlight the importance of habitat characteristics representing habitat quality in structuring communities, and suggest that this information may help to improve conservation practices of small freshwater ecosystems. PMID:29401522

Prediction of Groundwater Quality Trends Resulting from Anthropogenic Changes in Southeast Florida.

PubMed

Yi, Quanghee; Stewart, Mark

2018-01-01

The effects of surface water flow system changes caused by constructing water-conservation areas and canals in southeast Florida on groundwater quality under the Atlantic Coastal Ridge was investigated with numerical modeling. Water quality data were used to delineate a zone of groundwater with low total dissolved solids (TDS) within the Biscayne aquifer under the ridge. The delineated zone has the following characteristics. Its location generally coincides with an area where the Biscayne aquifer has high transmissivities, corresponds to a high recharge area of the ridge, and underlies a part of the groundwater mound formed under the ridge prior to completion of the canals. This low TDS groundwater appears to be the result of pre-development conditions rather than seepage from the canals constructed after the 1950s. Numerical simulation results indicate that the time for low TDS groundwater under the ridge to reach equilibrium with high TDS surface water in the water-conservation areas and Everglades National Park are approximately 70 and 60 years, respectively. The high TDS groundwater would be restricted to the water-conservation areas and the park due to its slow eastward movement caused by small hydraulic gradients in Rocky Glades and its mixing with the low TDS groundwater under the high-recharge area of the ridge. The flow or physical boundary conditions such as high recharge rates or low hydraulic conductivity layers may affect how the spatial distribution of groundwater quality in an aquifer will change when a groundwater flow system reaches equilibrium with an associated surface water flow system. © 2017, National Ground Water Association.

Basic Principles of Lyophilization, Part 1.

PubMed

Akers, Michael J

2015-01-01

The achievement of a high-quality lyophilized (freeze-dried) dosage form involves the combination of optimal formulation design and optimal freeze-dry cycle design. This 2-part article describes how this can be done. Part 1 discusses the basic principles and procedures of lyophilization up to a discussion on the different stages of lyophilization. The stages of lyophilization are discussed in part 2.

Toward the Development of a Program Quality Framework for Career and Technical Education Programs: A Researcher-Practitioner Collaborative Project

ERIC Educational Resources Information Center

Brodersen, R. Marc; Yanoski, David; Hyslop, Alisha; Imperatore, Catherine

2016-01-01

Career and technical education (CTE) programs of study are subject to rigorous state and federal accountability systems that provide information on key student outcomes. However, while these outcome measures can form a basis for identifying high- and low-performing programs, they are insufficient for answering underlying questions about how or why…

Compendium on Financing of Higher Education: Final Report of the Financing the Students' Future Project

ERIC Educational Resources Information Center

Payne, Bethan; Charonis, George-Konstantinos; Haaristo, Hanna-Stella; Maurer, Moritz; Kaiser, Florian; Siegrist, Rahel; McVitty, Debbie; Gruber, Angelika; Heerens, Nik; Xhomaqi, Brikena; Nötzl, Tina; Semjonov, Meeli; Primožic, Rok

2013-01-01

Higher education plays a vital role in society and the quality, accessibility, and form of higher education is highly dependent on financing. Financing of higher education is conceived to be of central importance for the future creation and dissemination of knowledge and research. Therefore, the financing of higher education is a topic that has…

Selected-zone dark-field electron microscopy.

NASA Technical Reports Server (NTRS)

Heinemann, K.; Poppa, H.

1972-01-01

Description of a new method which makes it possible to reduce drastically the resolution-limiting influence of chromatic aberration, and thus to obtain high-quality images, by selecting the image-forming electrons that have passed through a small annular zone of an objective lens. In addition, the manufacture of special objective-lens aperture diaphragms that are needed for this method is also described.

High-quality permanent draft genome sequence of the Bradyrhizobium elkanii type strain USDA 76T, isolated from Glycine max (L.) Merr

USDA-ARS?s Scientific Manuscript database

Bradyrhizobium elkanii USDA 76T (INSCD = ARAG00000000), the type strain for Bradyrhizobium elkanii, is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen-fixing root nodule of Glycine max (L. Merr) grown in the USA. Because of its significance as a ...

The Role of Interest in Students' Writing Fluency and the Quality of the Product.

ERIC Educational Resources Information Center

Lewis, Dorothy P.

A study was conducted to examine the effects of students' interests on their writing. A group of 571 high school seniors, fluent and nonfluent in writing, completed a questionnaire dealing with aspects of writing interest, such as subject, form, or voice. Tape recorded interviews addressing the same aspects were conducted with 11 fluent seniors…

Children's Media Use and Sleep Problems: Issues and Unanswered Questions. Research Brief

ERIC Educational Resources Information Center

Zimmerman, Frederick J.

2008-01-01

Research shows that most children and adolescents do not get enough high-quality sleep, and that their sleep times appear to have declined over the last two decades. Coinciding with this trend has been the rise in popularity of new media forms including the Internet, video games, cell phones and DVDs. Because of the immediacy and interactivity of…

Zinc oxide hollow microstructures and nanostructures formed under hydrothermal conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dem'yanets, L. N., E-mail: demianets@ns.crys.ras.ru; Artemov, V. V.; Li, L. E.

Zinc oxide low-dimensional hollow structures in the form of hexagonal plates with holes at the center of the {l_brace}0001{r_brace} facets are synthesized in the course of the low-temperature interaction of ZnO precursors with aqueous solutions of potassium fluoride under hydrothermal conditions. Crystals have the shape of single-walled or multiwalled 'nuts.' The high optical quality of the structures is confirmed by cathodoluminescence data at room temperature. The mechanism of the formation of ZnO 'nanonuts' and products of the interaction of the ZnO precursors with KF is proposed.

Quality assessment of Penthorum chinense Pursh through multicomponent qualification and fingerprint, chemometric, and antihepatocarcinoma analyses.

PubMed

Sun, Zong-Liang; Zhang, Yu-Zhen; Zhang, Feng; Zhang, Jia-Wei; Zheng, Guo-Can; Tan, Ling; Wang, Chong-Zhi; Zhou, Lian-Di; Zhang, Qi-Hui; Yuan, Chun-Su

2018-06-22

An efficient method combined with fingerprint and chemometric analyses was developed to evaluate the quality of the traditional Chinese medicine plant Penthorum chinense Pursh. Nine samples were collected from different regions during different harvest periods, and 17 components in the form of extracts were simultaneously examined to assess quality by using high-performance liquid chromatography. The hepatoprotective effects of components were investigated by assessing the inhibition of SMMC-7721 cell growth. The results indicated that the quality control method was accurate, stable, and reliable, and the hierarchical heat-map cluster and the principle component analyses confirmed that the classification of all nine samples was consistent. Quercetin and ellagitannins including pinocembrin-7-O-[3''-O-galloyl-4'',6''-hexahydroxydiphenoyl]-β-glucose (PGHG), thonningianin A, thonningianin B, and other flavonoids were abundant in the extracts, and significantly contributed to the hepatoprotective effects.

High-quality permanent draft genome sequence of Ensifer sp. PC2, isolated from a nitrogen-fixing root nodule of the legume tree (Khejri) native to the Thar Desert of India

DOE PAGES

Gehlot, Hukam Singh; Ardley, Julie; Tak, Nisha; ...

2016-06-23

Ensifer sp. PC2 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a nitrogen-fixing nodule of the tree legume P. cineraria (L.) Druce (Khejri), which is a keystone species that grows in arid and semi-arid regions of the Indian Thar desert. Strain PC2 exists as a dominant saprophyte in alkaline soils of Western Rajasthan. It is fast growing, well-adapted to arid conditions and is able to form an effective symbiosis with several annual crop legumes as well as species of mimosoid trees and shrubs. Here we describe the features of Ensifer sp. PC2, together with genome sequence informationmore » and its annotation. The 8,458,965 bp high-quality permanent draft genome is arranged into 171 scaffolds of 171 contigs containing 8,344 protein-coding genes and 139 RNA-only encoding genes, and is one of the rhizobial genomes sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project proposal.« less

High-quality permanent draft genome sequence of Ensifer sp. PC2, isolated from a nitrogen-fixing root nodule of the legume tree (Khejri) native to the Thar Desert of India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gehlot, Hukam Singh; Ardley, Julie; Tak, Nisha

Ensifer sp. PC2 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a nitrogen-fixing nodule of the tree legume P. cineraria (L.) Druce (Khejri), which is a keystone species that grows in arid and semi-arid regions of the Indian Thar desert. Strain PC2 exists as a dominant saprophyte in alkaline soils of Western Rajasthan. It is fast growing, well-adapted to arid conditions and is able to form an effective symbiosis with several annual crop legumes as well as species of mimosoid trees and shrubs. Here we describe the features of Ensifer sp. PC2, together with genome sequence informationmore » and its annotation. The 8,458,965 bp high-quality permanent draft genome is arranged into 171 scaffolds of 171 contigs containing 8,344 protein-coding genes and 139 RNA-only encoding genes, and is one of the rhizobial genomes sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project proposal.« less

Growth of single crystals of organic salts with large second-order optical nonlinearities by solution processes for devices

NASA Technical Reports Server (NTRS)

Leslie, Thomas M.

1995-01-01

Data obtained from the electric field induced second harmonic generation (EFISH) and Kurtz Powder Methods will be provided to MSFC for further refinement of their method. A theoretical model for predicting the second-order nonlinearities of organic salts is being worked on. Another task is the synthesis of a number of salts with various counterions. Several salts with promising SHG activities and new salts will be tested for the presence of two crystalline forms. The materials will be recrystallized from dry and wet solvents and compared for SHG efficiency. Salts that have a high SHG efficiency and no tendency to form hydrates will be documented. The synthesis of these materials are included in this report. A third task involves method to aid in the growth of large, high quality single crystals by solution processes. These crystals will be characterized for their applicability in the fabrication of devices that will be incorporated into optical computers in future programs. Single crystals of optimum quality may be obtained by crystal growth in low-gravity. The final task is the design of a temperature lowering single crystal growth apparatus for ground based work. At least one prototype will be built.

Human collagen produced in plants: more than just another molecule.

PubMed

Shoseyov, Oded; Posen, Yehudit; Grynspan, Frida

2014-01-01

Consequential to its essential role as a mechanical support and affinity regulator in extracellular matrices, collagen constitutes a highly sought after scaffolding material for regeneration and healing applications. However, substantiated concerns have been raised with regard to quality and safety of animal tissue-extracted collagen, particularly in relation to its immunogenicity, risk of disease transmission and overall quality and consistency. In parallel, contamination with undesirable cellular factors can significantly impair its bioactivity, vis-a-vis its impact on cell recruitment, proliferation and differentiation. High-scale production of recombinant human collagen Type I (rhCOL1) in the tobacco plant provides a source of an homogenic, heterotrimeric, thermally stable "virgin" collagen which self assembles to fine homogenous fibrils displaying intact binding sites and has been applied to form numerous functional scaffolds for tissue engineering and regenerative medicine. In addition, rhCOL1 can form liquid crystal structures, yielding a well-organized and mechanically strong membrane, two properties indispensable to extracellular matrix (ECM) mimicry. Overall, the shortcomings of animal- and cadaver-derived collagens arising from their source diversity and recycled nature are fully overcome in the plant setting, constituting a collagen source ideal for tissue engineering and regenerative medicine applications.

Bioethics and transnational medical travel: India,"medical tourism," and the globalisation of healthcare.

PubMed

Runnels, Vivien; Turner, Leigh

2011-01-01

Health-related travel, also referred to as "medical tourism" is historically well-known. Its emerging contemporary form suggests the development of a form of globalised for-profit healthcare. Medical tourism to India, the focus of a recent conference in Canada, provides an example of the globalisation of healthcare. By positioning itself as a low-cost, high-tech, fast-access and high-quality healthcare destination country, India offers healthcare to medical travellers who are frustrated with waiting lists and the limited availability of some procedures in Canada. Although patients have the right to travel and seek care at international medical facilities, there are a number of dimensions of medical tourism that are disturbing. The diversion of public investments in healthcare to the private sector, in order to serve medical travellers, perversely transfers public resources to international patients at a time when the Indian public healthcare system fails to provide primary healthcare to its own citizens. Further, little is known about patient safety and quality care in transnational medical travel. Countries that are departure points as well as destination countries need to carefully explore the ethical, social, cultural, and economic consequences of the growing phenomenon of for-profit international medical travel.

75 FR 57035 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-17

... collection; Title of Information Collection: QualityNet Identity Management System (QIMS) Account Form; Use: The QualityNet Identity Management System (QIMS) account registration form must be completed by any...

Spreadsheet WATERSHED modeling for nonpoint-source pollution management in a Wisconsin basin

USGS Publications Warehouse

Walker, J.F.; Pickard, S.A.; Sonzogni, W.C.

1989-01-01

Although several sophisticated nonpoint pollution models exist, few are available that are easy to use, cover a variety of conditions, and integrate a wide range of information to allow managers and planners to assess different control strategies. Here, a straightforward pollutant input accounting approach is presented in the form of an existing model (WATERSHED) that has been adapted to run on modern electronic spreadsheets. As an application, WATERSHED is used to assess options to improve the quality of highly eutrophic Delavan Lake in Wisconsin. WATERSHED is flexible in that several techniques, such as the Universal Soil Loss Equation or unit-area loadings, can be used to estimate nonpoint-source inputs. Once the model parameters are determined (and calibrated, if possible), the spreadsheet features can be used to conduct a sensitivity analysis of management options. In the case of Delavan Lake, it was concluded that, although some nonpoint controls were cost-effective, the overall reduction in phosphorus would be insufficient to measurably improve water quality.A straightforward pollutant input accounting approach is presented in the form of an existing model (WATERSHED) that has been adapted to run on modern electronic spreadsheets. As an application, WATERSHED is used to assess options to improve the quality of highly eutrophic Delavan Lake in Wisconsin. WATERSHED is flexible in that several techniques, such as the Universal Soil Loss Equation or unit-area loadings, can be used to estimate nonpoint-source inputs. Once the model parameters are determined (and calibrated, if possible), the spreadsheet features can be used to conduct a sensitivity analysis of management options. In the case of Delavan Lake, it was concluded that, although some nonpoint controls were cost-effective, the overall reduction in phosphorus would be insufficient to measurably improve water quality.

Evaluating the message or the messenger? Implications for self-validation in persuasion.

PubMed

Clark, Jason K; Wegener, Duane T; Sawicki, Vanessa; Petty, Richard E; Briñol, Pablo

2013-12-01

Characteristics of persuasive message sources have been extensively studied. However, little attention has been paid to situations when people are motivated to form an evaluation of the communicator rather than the communicated issue. We postulated that these different foci can affect how a source validates message-related cognitions. Participants focused on the source (Studies 1 and 2) or the issue (Study 2) while reading weak or strong message arguments. Later, the communicator was described as low or high in credibility. When focused on the source, highly motivated participants were more confident and their attitudes were more reflective of thoughts when argument quality matched (e.g., weak arguments-low credibility) rather than mismatched (e.g., weak arguments-high credibility) source credibility. Conversely, when participants were focused on the issue, self-validation was greater when credibility was high rather than low-regardless of argument quality. Implications of these findings for the study and practice of persuasion are discussed.

Efficient high-performance ultrasound beamforming using oversampling

NASA Astrophysics Data System (ADS)

Freeman, Steven R.; Quick, Marshall K.; Morin, Marc A.; Anderson, R. C.; Desilets, Charles S.; Linnenbrink, Thomas E.; O'Donnell, Matthew

1998-05-01

High-performance and efficient beamforming circuitry is very important in large channel count clinical ultrasound systems. Current state-of-the-art digital systems using multi-bit analog to digital converters (A/Ds) have matured to provide exquisite image quality with moderate levels of integration. A simplified oversampling beamforming architecture has been proposed that may a low integration of delta-sigma A/Ds onto the same chip as digital delay and processing circuitry to form a monolithic ultrasound beamformer. Such a beamformer may enable low-power handheld scanners for high-end systems with very large channel count arrays. This paper presents an oversampling beamformer architecture that generates high-quality images using very simple; digitization, delay, and summing circuits. Additional performance may be obtained with this oversampled system for narrow bandwidth excitations by mixing the RF signal down in frequency to a range where the electronic signal to nose ratio of the delta-sigma A/D is optimized. An oversampled transmit beamformer uses the same delay circuits as receive and eliminates the need for separate transmit function generators.

Monitoring of multiple solvent induced form changes during high shear wet granulation and drying processes using online Raman spectroscopy.

PubMed

Reddy, Jay Poorna; Jones, John W; Wray, Patrick S; Dennis, Andrew B; Brown, Jonathan; Timmins, Peter

2018-04-25

Form changes during drug product processing can be a risk to the final product quality in terms of chemical stability and bioavailability. In this study, online Raman spectroscopy was used to monitor the form changes in real time during high shear wet granulation of Compound A, a highly soluble drug present at a high drug load in an extended release formulation. The effect of water content, temperature, wet massing time and drying technique on the degree of drug transformation were examined. A designed set of calibration standards were employed to develop quantitative partial least square regression models to predict the concentration of each drug form during both wet granulation and the drying process. Throughout all our experiments we observed complex changes of the drug form during granulation, manifest as conversions between the initial non-solvated form of Compound A, the hemi-hydrate form and the "apparent" amorphous form (dissolved drug). The online Raman data demonstrate that the non-solvated form converts to an "apparent" amorphous form (dissolved drug) due to drug dissolution with no appearance of the hemi-hydrate form during water addition stage. The extent of conversion of the non-solvated form was governed by the amount of water added and the rate of conversion was accelerated at higher temperatures. Interestingly, in the wet massing zone, the formation of the hemi-hydrate form was observed at a rate equivalent to the rate of depletion of the non-solvated form with no change in the level of the "apparent amorphous" form generated. The level of hemi-hydrate increased with an increase in wet massing time. The drying process had a significant effect on the proportion of each form. During tray drying, changes in drug form continued for hours. In contrast fluid bed drying appeared to lock the final proportions of drug form product attained during granulation, with comparatively small changes observed during drying. In conclusion, it was possible to simultaneously monitor the three forms in real time during wet granulation and drying using online Raman spectroscopy. The results regarding the effect of process parameters on the degree of transformation are critical for designing a robust process that ensures a consistent form in the final drug product. Copyright © 2018 Elsevier B.V. All rights reserved.

Dairy intensification in developing countries: effects of market quality on farm-level feeding and breeding practices.

PubMed

Duncan, A J; Teufel, N; Mekonnen, K; Singh, V K; Bitew, A; Gebremedhin, B

2013-12-01

Smallholder dairy production represents a promising income generating activity for poor farmers in the developing world. Because of the perishable nature of milk, marketing arrangements for collection, distribution and sale are important for enhanced livelihoods in the smallholder dairy sector. In this study we examined the relationship between market quality and basic feeding and breeding practices at farm level. We define market quality as the attractiveness and reliability of procurement channels and associated input supply arrangements. We took as our study countries, India with its well-developed smallholder dairy sector, and Ethiopia where the smallholder dairy industry has remained relatively undeveloped despite decades of development effort. We conducted village surveys among producer groups in 90 villages across three States in India and two Regions in Ethiopia. Producer groups were stratified according to three levels of market quality - high, medium and low. Data showed that diet composition was relatively similar in India and Ethiopia with crop residues forming the major share of the diet. Concentrate feeding tended to be more prominent in high market quality sites. Herd composition changed with market quality with more dairy (exotic) cross-bred animals in high market quality sites in both India and Ethiopia. Cross-bred animals were generally more prominent in India than Ethiopia. Herd performance within breed did not change a great deal along the market quality gradient. Parameters such as calving interval and milk yield were relatively insensitive to market quality. Insemination of cross-bred cows was predominantly by artificial insemination (AI) in India and accounted for around half of cross-bred cow inseminations in Ethiopia. Data on perceptions of change over the last decade indicated that per herd and per cow productivity are both increasing in high market quality sites with a more mixed picture in medium and low-quality sites. Similarly dairy-derived income is on the increase in high market quality sites. This is accompanied by a strong increase in stall feeding at the expense of grazing. The study indicates that the first constraint to intensification of dairy production in Ethiopia is the genetic quality of the herd. There is less scope for improved AI provision in India since the cross-bred herd is mainly serviced by AI already. However, as for Ethiopia, there is considerable scope for closing yield gaps in India through improved feed use and supply. Results strongly show that well-developed markets with good procurement arrangements are key for sustainable dairy intensification.

Forming social capital--does participatory planning foster trust in institutions?

PubMed

Menzel, Susanne; Buchecker, Matthias; Schulz, Tobias

2013-12-15

Participatory planning that includes interest groups and municipal representatives has been presented as a means to deal with the increasing difficulty to reach arrangements due to progressively scarce land resources. Under dispute is whether collaborative forms of planning augment social capital or whether they might actually cause the destruction of such a valuable social commodity. In this paper we focus on trust in institution as a specific dimension of social capital because we argue that this is one of the effects the convenors of such participatory planning procedures are most interested in. We pursue a pre-post design and survey advisory group members of five on-going river-related planning processes in Switzerland. Controlling for generalised trust, we investigate how trust in institutions is affected over time by the quality of such processes and the degree of participation they offer. We find that generalised trust is highly correlated with initial levels of trust and so is process quality. Particularly the latter finding challenges the usually assumed direction of causality according to which process quality influences trust building. Additionally, we find a positive (non-significant) effect of process quality on changes in trust, while a higher degree of participation rather seems to hinder trust building. We suppose this indicates that under the conditions of limited time and resources more attention should be paid to how to improve the quality of participatory processes than putting much effort in increasing the degree of participation. Copyright © 2013 Elsevier Ltd. All rights reserved.

41 CFR 101-26.501-6 - Forms used in connection with delivery of vehicles.

Code of Federal Regulations, 2011 CFR

2011-07-01

... repairs pursuant to the warranty. (b) Standard Form 368, Quality Deficiency Report (Category II). GSA is constantly striving to improve customer service and the quality of motor vehicles for which it contracts. To inform contractors of the deficiencies noted during the life of the vehicles, Standard Form 368 shall be...

41 CFR 101-26.501-6 - Forms used in connection with delivery of vehicles.

Code of Federal Regulations, 2014 CFR

2014-07-01

... repairs pursuant to the warranty. (b) Standard Form 368, Quality Deficiency Report (Category II). GSA is constantly striving to improve customer service and the quality of motor vehicles for which it contracts. To inform contractors of the deficiencies noted during the life of the vehicles, Standard Form 368 shall be...

The Relationship between the Content and the Form of Metaphorical Statements

ERIC Educational Resources Information Center

Xu, Xu

2010-01-01

Recent research suggests that the quality of a metaphorical topic-vehicle pairing should be the determinant to the choice of a proper grammatical form, nominal metaphor versus simile. Two studies examined the relationship between the quality of the content of a metaphorical statement and its grammatical form. Study 1 showed that the two…

A comparison of outcomes involving highly cohesive, form-stable breast implants from two manufacturers in patients undergoing primary breast augmentation.

PubMed

Jewell, Mark L; Jewell, James L

2010-01-01

Although there have been reports of single-surgeon outcomes with highly cohesive, form-stable silicone gel implants in women undergoing primary breast augmentation, there has been only one study published that compares the outcomes between the Allergan 410 and the Mentor CPG devices. The goal of the study is to compare outcomes in each cohort and to determine if quality systems and processes would have an impact on lowering the surgical revision rate, as compared to published reports for round gel implants and form-stable implants. Patients selected for the study were required to meet predefined inclusion criteria and general indications for breast augmentation. All subjects were treated uniformly with extensive informed consent prior to surgery. The entire process of breast augmentation (patient assessment, informed consent, the surgical procedure itself and postoperative instructions) was identical between the two groups. Patients were not randomized, as the studies did not start at the same time. The process for management of each patient was based on adaptation of the Toyota Production System and Lean Manufacturing, with emphasis on achieving operational excellence in the use of planning templates for surgery, including accurate management of patient expectations regarding size outcome. Outcomes data included physical breast measurements, quality of life metrics, and patient/surgeon satisfaction assessment. Adverse events were compared against published data for breast implants. Follow-up ranged between 20-77 months (Allergan 410) and 16-77 months (Mentor CPG). The outcome data indicate that these devices produce natural-appearing breasts with extremely low aggregate reoperation rate (4.2%). Only 0.8% of the reoperations were attributable to surgeon-related factors. There were no reoperations to correct mismanaged size expectations during the course of each study. There were 13 pregnancies and no difficulties with lactation were reported. Rippling (lateral/medial, palpable and/or visible) was encountered in both cohorts. The Mentor CPG cohort had a fivefold greater incidence of rippling (37.3% versus 7.6% in Allergan 410 cohort). This was highly statistically significant (P < .001). Provided that there is adherence to core principles and avoidance of errors in planning, patient expectations, and surgery, highly cohesive, form-stable breast implants can deliver excellent long term outcomes in primary breast augmentation in a diverse patient population. The impact of quality processes such as Toyota Production System and Lean Manufacturing was substantive in delivering operational excellence in primary breast augmentation.

Investigation on the innovative impact hydroforming technology

NASA Astrophysics Data System (ADS)

Lihui, Lang; Shaohua, Wang; Chunlei, Yang

2013-05-01

Hydroforming has a rapid development recently which has good forming quality and less cost. However, it still cannot meet the requirements of forming complex parts with small features just like convex tables, or bars which are widely employed in automotive and aircraft industries. The impact hydroforming technology means the most features are formed by hydroforming and the small features are rapidly reshaped by high intensity impact energy in a very short time after the traditional hydroforming. The impact pressure rises to the peak in 10ms which belongs to dynamic loading. In this paper, impact hydroforming process is proposed. The generation and transmission of impact hydroforming energy and impact shock wave were studied and simulated. The deformation process of the metal disks under the dynamic impact loading condition presented impact hydroforming is an effective technology to form complex parts with small features.

Neighborhood Variation of Sustainable Urban Morphological Characteristics.

PubMed

Lai, Poh-Chin; Chen, Si; Low, Chien-Tat; Cerin, Ester; Stimson, Robert; Wong, Pui Yun Paulina

2018-03-07

Compact cities and their urban forms have implications on sustainable city development because of high density urban settlement, increased accessibility, and a balanced land use mix. This paper uses quantitative means of understanding urban morphological characteristics with reference to the differing qualities of the urban form (i.e., street patterns, building volumes, land uses and greenery). The results, based on 89 neighborhood communities of Hong Kong, show varying degrees of regional differences in the urban built form supported by numerical statistics and graphical illustrations. This paper offers empirical evidence on some morphological characteristics that can be estimated objectively using modern geospatial technologies and applied universally to inform urban planning. However, more studies linking these quantifiable measures of the physical form with sustainable urban living are needed to account for human comfort in the totality of environmental, social, and economic responsibilities.

Neighborhood Variation of Sustainable Urban Morphological Characteristics

PubMed Central

Chen, Si; Stimson, Robert

2018-01-01

Compact cities and their urban forms have implications on sustainable city development because of high density urban settlement, increased accessibility, and a balanced land use mix. This paper uses quantitative means of understanding urban morphological characteristics with reference to the differing qualities of the urban form (i.e., street patterns, building volumes, land uses and greenery). The results, based on 89 neighborhood communities of Hong Kong, show varying degrees of regional differences in the urban built form supported by numerical statistics and graphical illustrations. This paper offers empirical evidence on some morphological characteristics that can be estimated objectively using modern geospatial technologies and applied universally to inform urban planning. However, more studies linking these quantifiable measures of the physical form with sustainable urban living are needed to account for human comfort in the totality of environmental, social, and economic responsibilities. PMID:29518956

Highly oxidized graphene oxide and methods for production thereof

DOEpatents

Tour, James M.; Kosynkin, Dmitry V.

2016-08-30

A highly oxidized form of graphene oxide and methods for production thereof are described in various embodiments of the present disclosure. In general, the methods include mixing a graphite source with a solution containing at least one oxidant and at least one protecting agent and then oxidizing the graphite source with the at least one oxidant in the presence of the at least one protecting agent to form the graphene oxide. Graphene oxide synthesized by the presently described methods is of a high structural quality that is more oxidized and maintains a higher proportion of aromatic rings and aromatic domains than does graphene oxide prepared in the absence of at least one protecting agent. Methods for reduction of graphene oxide into chemically converted graphene are also disclosed herein. The chemically converted graphene of the present disclosure is significantly more electrically conductive than is chemically converted graphene prepared from other sources of graphene oxide.

Review of cyclotron production and quality control of ``High specific activity'' radionuclides for biomedical, biological, industrial and environmental applications at INFN-LASA

NASA Astrophysics Data System (ADS)

Birattari, C.; Bonardi, M.; Groppi, F.; Gini, L.

2001-12-01

At the "Radiochemistry Laboratory" of Accelerators and Applied Superconductivity Laboratory, LASA, a wide range of high specific activity radionuclides, RNs, have been produced in No Carrier Added form, for both basic research and application purposes. Use was made of the AVF proton cyclotron (K=45) of Milan University (up to 1987). More recently, the irradiations were carried out at the Scanditronix MC40 cyclotron (K=38; p, d, He-4 and He-3) of JRC-Ispra, Italy, of the European Community. In order to optimize the irradiation conditions for radioisotope production, a series of thin- and thick-target excitation functions have been experimentally determined. For each RN, a specific radiochemical separation has been developed in order to obtain GBq (mCi) amounts of the radiotracers in "high specific activity" No Carrier Added form (NCA).

Starch Applications for Delivery Systems

NASA Astrophysics Data System (ADS)

Li, Jason

2013-03-01

Starch is one of the most abundant and economical renewable biopolymers in nature. Starch molecules are high molecular weight polymers of D-glucose linked by α-(1,4) and α-(1,6) glycosidic bonds, forming linear (amylose) and branched (amylopectin) structures. Octenyl succinic anhydride modified starches (OSA-starch) are designed by carefully choosing a proper starch source, path and degree of modification. This enables emulsion and micro-encapsulation delivery systems for oil based flavors, micronutrients, fragrance, and pharmaceutical actives. A large percentage of flavors are encapsulated by spray drying in today's industry due to its high throughput. However, spray drying encapsulation faces constant challenges with retention of volatile compounds, oxidation of sensitive compound, and manufacturing yield. Specialty OSA-starches were developed suitable for the complex dynamics in spray drying and to provide high encapsulation efficiency and high microcapsule quality. The OSA starch surface activity, low viscosity and film forming capability contribute to high volatile retention and low active oxidation. OSA starches exhibit superior performance, especially in high solids and high oil load encapsulations compared with other hydrocolloids. The submission is based on research and development of Ingredion

Technical efficiency of nursing homes: do five-star quality ratings matter?

PubMed

Dulal, Rajendra

2017-02-28

This study investigates associations between five-star quality ratings and technical efficiency of nursing homes. The sample consists of a balanced panel of 338 nursing homes in California from 2009 through 2013 and uses two-stage data envelopment (DEA) analysis. The first-stage applies an input oriented variable returns to scale DEA analysis. The second-stage uses a left censored random-effect Tobit regression model. The five-star quality ratings i.e., health inspections, quality measures, staffing available on the Nursing Home Compare website are divided into two categories: outcome and structure form of quality. Results show that quality measures ratings and health inspection ratings, used as outcome form of quality, are not associated with mean technical efficiency. These quality ratings, however, do affect the technical efficiency of a particular nursing home and hence alter the ranking of nursing homes based on efficiency scores. Staffing rating, categorized as a structural form of quality, is negatively associated with mean technical efficiency. These findings show that quality dimensions are associated with technical efficiency in different ways, suggesting that multiple dimensions of quality should be included in the efficiency analysis of nursing homes. They also suggest that patient care can be enhanced through investing more in improving care delivery rather than simply raising the number of staff per resident.

Novel Nanotube Manufacturing Streamlines Production

NASA Technical Reports Server (NTRS)

2007-01-01

Nanotubes have novel qualities that make them uniquely qualified for a plethora of uses, including applications in electronics, optics, and other scientific and industrial fields. The NASA process for creating these nanostructures involves using helium arc welding to vaporize an amorphous carbon rod and then form nanotubes by depositing the vapor onto a water-cooled carbon cathode, which then yields bundles, or ropes, of single-walled nanotubes at a rate of 2 grams per hour using a single setup. This eliminates costs associated with the use of metal catalysts, including the cost of product purification, resulting in a relatively inexpensive, high-quality, very pure end product. While managing to be less expensive, safer, and simpler, the process also increases the quality of the nanotubes. Goddard's Innovative Partnerships Program (IPP) Office promoted the technology, and in 2005, Boise-based Idaho Space Materials Inc. (ISM) was formed and applied for a nonexclusive license for the single-walled carbon nanotube (SWCNT) manufacturing technology. ISM commercialized its products, and the inexpensive, robust nanotubes are now in the hands of the scientists who will create the next generation of composite polymers, metals, and ceramics that will impact the way we live. In fact, researchers are examining ways for these newfound materials to be used in the manufacture of transistors and fuel cells, large screen televisions, ultra-sensitive sensors, high-resolution atomic force microscopy probes, supercapacitors, transparent conducting films, drug carriers, catalysts, and advanced composite materials, to name just a few of the myriad technologies to benefit.

The advanced along track scanning radiometer (aatsr) on esa's envisat satellite - an early assessment

NASA Astrophysics Data System (ADS)

Llewellyn-Jones, D.; Mutlow, C.; Smith, D.; Edwards, M.

The AATSR sensor is an imaging radiometer designed to measure top-of-the- atmosphere brightness temperature in seven thermal infrared, reflected infrared and visible wavelength channels. The main objective of the AATSR mission is to generate fields of global sea-surface temperature to the high levels of accuracy required for the monitoring and detection of climate change, and to support a broad range of associated research into the marine, terrestrial, cryospheric and atmospheric environments. An essential component of this objective is maintain continuity with the high-quality data-sets already collected form the two predecessor sensors, ATSR1 and 2 on ESA's ERS-1 and -2 satellites respectively. Following the successful launch of ENVISAT on March 1 2002, the AATSR sensor was activated and systematically brought up to full operating configuration in accordance with the agreed Switch-On and Data Acquisition Plan (SODAP). The early images form AATSR are of a quality that is consistent with its objective of effective data continuity. Since the instrument has been returning data, a programme of quality assessment has been taking place. This has included a systematic assessment of instrumental aspects such as signal-to-noise performance and image stability as well as the initial observations in the AATSR validation programme. In this programme, AATSR data-products are compared with correlative observations from other sources, which include, sea-borne radiometers, meteorological analysis fields and data from other satellites. This paper reports early results from some of the activities.

Historical transition of eco-structure in a tidal flat caused by expansion of sewerage treatment area.

PubMed

Tatsumoto, Hideki; Ishii, Yuichi; Machida, Motoi; Taki, Kazuo

2004-05-11

An artificial tidal flat was prepared for the mitigation tool on coastal environment. However, it is considered that most of the flat was not restored to the sufficient amenities for aquatic living things, migratory birds, etc. because none of the ecological mechanisms were understood or planned for. It is therefore investigated in this paper that historical transition factors in ecosystem structure are selected and traced with the diffusion of a public sewerage system, and with environmental factors such as water quality, sediment condition, and aquatic producers in the Yatsu Tidal Flat. As a result, it can be defined that the tidal flat, just like a lagoon, was formed artificially with reclamation and development of its circumference at the first step of transition; the water quality and sediment condition gradually became brackish water and muddy sediment conditions, interactively. The ecosystem pyramid forming orderly layers according to trophic level appeared as a high-bio-production potential in its tidal flat. In the second step, i.e., in recent years, the characteristics of water quality and sediment conditions evolved into a foreshore tidal flat, namely, conditions in the flat observed were that the progression of water included a high concentration of chloride ion as seawater and sediment conditions became sandy. Because of that, the inflowing fresh water and organic mater from the land area decreased with the improvement of the public sewerage system. The ecosystem pyramid was distorted into a chaos pyramid, with inversion of Ulva spp.

Tunable molten oxide pool assisted plasma-melter vitrification systems

DOEpatents

Titus, Charles H.; Cohn, Daniel R.; Surma, Jeffrey E.

1998-01-01

The present invention provides tunable waste conversion systems and apparatus which have the advantage of highly robust operation and which provide complete or substantially complete conversion of a wide range of waste streams into useful gas and a stable, nonleachable solid product at a single location with greatly reduced air pollution to meet air quality standards. The systems provide the capability for highly efficient conversion of waste into high quality combustible gas and for high efficiency conversion of the gas into electricity by utilizing a high efficiency gas turbine or an internal combustion engine. The solid product can be suitable for various commercial applications. Alternatively, the solid product stream, which is a safe, stable material, may be disposed of without special considerations as hazardous material. In the preferred embodiment, the arc plasma furnace and joule heated melter are formed as a fully integrated unit with a common melt pool having circuit arrangements for the simultaneous independently controllable operation of both the arc plasma and the joule heated portions of the unit without interference with one another. The preferred configuration of this embodiment of the invention utilizes two arc plasma electrodes with an elongated chamber for the molten pool such that the molten pool is capable of providing conducting paths between electrodes. The apparatus may additionally be employed with reduced use or without further use of the gases generated by the conversion process. The apparatus may be employed as a net energy or net electricity producing unit where use of an auxiliary fuel provides the required level of electricity production. Methods and apparatus for converting metals, non-glass forming waste streams and low-ash producing inorganics into a useful gas are also provided. The methods and apparatus for such conversion include the use of a molten oxide pool having predetermined electrical, thermal and physical characteristics capable of maintaining optimal joule heating and glass forming properties during the conversion process.

[Thinking on designation of sham acupuncture in clinical research].

PubMed

Pan, Li-Jia; Chen, Bo; Zhao, Xue; Guo, Yi

2014-01-01

Randomized controlled trials (RCT) is the source of the raw data of evidence-based medicine. Blind method is adopted in most of the high-quality RCT. Sham acupuncture is the main form of blinded in acupuncture clinical trial. In order to improve the quality of acupuncture clinical trail, based on the necessity of sham acupuncture in clinical research, the current situation as well as the existing problems of sham acupuncture, suggestions were put forward from the aspects of new way and new designation method which can be adopted as reference, and factors which have to be considered during the process of implementing. Various subjective and objective factors involving in the process of trial should be considered, and used of the current international standards, try to be quantification, and carry out strict quality monitoring.

Collapse characteristics of hydroformed tubes

NASA Astrophysics Data System (ADS)

Kim, Young-Suk; Lee, Young-Moon; Kim, Cheol; Hwang, Sang-Moo

2002-07-01

Tube hydroforming technology (THF) has been extensively applied to auto-body structural members such as the engine cradle and side member in order to meet the urgent need for vehicle weight and cost reduction as well as high quality for collision accidents. In this paper, the mechanical properties for hydroformed tubes with various bulging strians under the plane strain mode are experimentally investigated. Axial compression tests for hydroformed tubes are performed to investigate the collapse load and collapse absorption capacity through the collapse load-displacement curves. Moreover, the collapse absorption capacities are compared and discussed among as-received, hydroformed, and press formed tubes. Results demonstrate that the hydroformed tubes show higher collapse absorption capability in comparison with the as-received tube and the press formed tube because of its high yield strength due to strain hardening.

Waste IPSC : Thermal-Hydrologic-Chemical-Mechanical (THCM) modeling and simulation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeze, Geoffrey A.; Wang, Yifeng; Arguello, Jose Guadalupe, Jr.

2010-10-01

Waste IPSC Objective is to develop an integrated suite of high performance computing capabilities to simulate radionuclide movement through the engineered components and geosphere of a radioactive waste storage or disposal system: (1) with robust thermal-hydrologic-chemical-mechanical (THCM) coupling; (2) for a range of disposal system alternatives (concepts, waste form types, engineered designs, geologic settings); (3) for long time scales and associated large uncertainties; (4) at multiple model fidelities (sub-continuum, high-fidelity continuum, PA); and (5) in accordance with V&V and software quality requirements. THCM Modeling collaborates with: (1) Other Waste IPSC activities: Sub-Continuum Processes (and FMM), Frameworks and Infrastructure (and VU,more » ECT, and CT); (2) Waste Form Campaign; (3) Used Fuel Disposition (UFD) Campaign; and (4) ASCEM.« less

What lensed galaxies say about winds and physical conditions in high-z galaxies

NASA Astrophysics Data System (ADS)

Rigby, Jane; Gladders, Michael; Sharon, Keren; Wuyts, Eva; Bayliss, Matthew B.; Bordoloi, Rongmon

2015-08-01

Gravitational lensing can magnify galaxies by factors of 10--100 times, transforming them from objects we can barely detect to bright objects we can study in detail. I'll summarize new results from a comprehensive program, using imaging from Hubble and Spitzer, and high-quality spectroscopy from Keck, Magellan, and Hubble, to study how galaxies formed stars at redshifts of 1--3, the epoch when most of the Universe's stars were formed. In particularly favorable cases, the imaging and spectra measure variations in physical and wind properties over spatial scales down to ~200 pc. My talk will include results from Bayliss et al. 2014, Wuyts et al. 2014, Whitaker et al. 2014, and Rigby et al. 2014, as well as results not yet published.

Research on liquid impact forming technology of double-layered tubes

NASA Astrophysics Data System (ADS)

Sun, Changying; Liu, Jianwei; Yao, Xinqi; Huang, Beixing; Li, Yuhan

2018-03-01

A double-layered tube is widely used and developed in various fields because of its perfect comprehensive performance and design. With the advent of the era of a double-layered tube, the requirements for double layered tube forming quality, manufacturing cost and forming efficiency are getting higher, so forming methods of a double-layered tube are emerged in an endless stream, the forming methods of a double-layered tube have a great potential in the future. The liquid impact forming technology is a combination of stamping technology and hydroforming technology. Forming a double-layered tube has huge advantages in production cost, quality and efficiency.

Association between stigma, depression and quality of life of people living with HIV/AIDS (PLHA) in South India – a community based cross sectional study

PubMed Central

2012-01-01

Background India has around 2.27 million adults living with HIV/AIDS who face several challenges in the medical management of their disease. Stigma, discrimination and psychosocial issues are prevalent. The objective of the study was to determine the prevalence of severe stigma and to study the association between this, depression and the quality of life (QOL) of people living with HIV/AIDS (PLHA) in Tamil Nadu. Methods This was a community based cross sectional study carried out in seven districts of Tamil Nadu, India, among 400 PLHA in the year 2009. The following scales were used for stigma, depression and quality of life, Berger scale, Major Depression Inventory (MDI) scale and the WHO BREF scale. Both Stigma and QOL were classified as none, moderate or severe/poor based on the tertile cut off values of the scale scores. Depression was classified as none, mild, moderate and severe. Logistic regression analyses were performed to study the risk factors. Results Twenty seven per cent of PLHA had experienced severe forms of stigma. These were severe forms of personalized stigma (28.8%), negative self-image (30.3%), perceived public attitude (18.2%) and disclosure concerns (26%). PLHA experiencing severe depression were 12% and those experiencing poor quality of life were 34%. Poor QOL reported in the physical, psychological, social and environmental domains was 42.5%, 40%, 51.2% and 34% respectively. PLHA who had severe personalized stigma and negative self-image had 3.4 (1.6-7.0) and 2.1 (1.0-4.1) times higher risk of severe depression respectively (p < .001). PLHA who had severe depression had experienced 2.7(1.1-7.7) times significantly poorer QOL. Conclusions Severe forms of stigma were equivalently prevalent among all the categories of PLHA. However, PLHA who had experienced severe depression had only developed poor QOL. A high level of social support was associated with a high level of QOL. PMID:22720691

Is the kidney disease quality of life-36 (KDQOL-36) a valid instrument for Chinese dialysis patients?

PubMed

Chow, Susan Ka Yee; Tam, Bonnie Mee Ling

2014-12-15

The aim of this study is to determine the validity and reliability of the Cantonese Chinese version of the Kidney Disease Quality of Life-36 (KDQOL-36™) questionnaire. The scale has been translated into Cantonese Chinese, but has not been tested among the Cantonese-speaking populations. A total of 110 dialysis patients and 122 renal transplant patients were recruited. The data for the KDQOL-36™ were extracted from the KDQOL-Short Form. The criterion validity and scale equivalence were examined using the KDQOL-Short Form scores as the gold standard. The Hospital Anxiety and Depression scale was used to identify the correlations between depression, anxiety, and quality of life to establish the convergent validity. Discriminant validity was examined using the transplant patients to compare the quality of life of dialysis patients. The Cronbach's alpha coefficient and test-retest were used for estimating reliability. There were very strong positive correlations for the physical and mental component summary between the KDQOL-36™ and KDQOL-Short Form. Despite the strong correlations, the effect size was 0.6 and 0.13 for the physical composite summary and mental composite summary score, respectively. Most of the subscales demonstrated significant moderate correlations with the Hospital Anxiety and Depression Scale, from -0.265 to -0.516. The discriminant validity was confirmed with a significant difference between the dialysis and transplant group patients. A high intraclass correlation of >0.98 was demonstrated in the test-retest. The Cantonese Chinese KDQOL-36™ was reliable. Further testing will be required to determine its validity for the physical health summary scale.

The human immunodeficiency virus antigen Nef forms protein bodies in leaves of transgenic tobacco when fused to zeolin

PubMed Central

de Virgilio, Maddalena; Bellucci, Michele; Mainieri, Davide; Rossi, Marika; Benvenuto, Eugenio; Arcioni, Sergio; Vitale, Alessandro

2008-01-01

Protein bodies (PB) are stable polymers naturally formed by certain seed storage proteins within the endoplasmic reticulum (ER). The human immunodeficiency virus negative factor (Nef) protein, a potential antigen for the development of an anti-viral vaccine, is highly unstable when introduced into the plant secretory pathway, probably because of folding defects in the ER environment. The aim of this study was to promote the formation of Nef-containing PB in tobacco (Nicotiana tabacum) leaves by fusing the Nef sequence to the N-terminal domains of the maize storage protein γ-zein or to the chimeric protein zeolin (which efficiently forms PB and is composed of the vacuolar storage protein phaseolin fused to the N-terminal domains of γ-zein). Protein blots and pulse–chase indicate that fusions between Nef and the same γ-zein domains present in zeolin are degraded by ER quality control. Consistently, a mutated zeolin, in which wild-type phaseolin was substituted with a defective version known to be degraded by ER quality control, is unstable in plant cells. Fusion of Nef to the entire zeolin sequence instead allows the formation of PB detectable by electron microscopy and subcellular fractionation, leading to zeolin–Nef accumulation higher than 1% of total soluble protein, consistently reproduced in independent transgenic plants. It is concluded that zeolin, but not its γ-zein portion, has a positive dominant effect over ER quality control degradation. These results provide insights into the requirements for PB formation and avoidance of quality-control degradation, and indicate a strategy for enhancing foreign protein accumulation in plants. PMID:18540021

Development of a procedure for forming assisted thermal joining of tubes

NASA Astrophysics Data System (ADS)

Chen, Hui; Löbbe, Christian; Staupendahl, Daniel; Tekkaya, A. Erman

2018-05-01

With the demand of lightweight design in the automotive industry, not only the wall-thicknesses of tubular components of the chassis or spaceframe are continuously decreased. Also the thicknesses of exhaust system parts are reduced to save material and mass. However, thinner tubular parts bring about additional challenges in joining. Welding or brazing methods, which are utilized in joining tubes with specific requirements concerning leak tightness, are sensitive to the gap between the joining partners. Furthermore, a large joining area is required to ensure the durability of the joint. The introduction of a forming step in the assembled state prior to thermal joining can define and control the gap for subsequent brazing or welding. The mechanical pre-joint resulting from the previously described calibration step also results in easier handling of the tubes prior to thermal joining. In the presented investigation, a spinning process is utilized to produce force-fit joints of varying lengths and diameter reduction and form-fit joints with varying geometrical attributes. The spinning process facilitates a high formability and geometrical flexibility, while at the achievable precision is high and the process forces are low. The strength of the joints is used to evaluate the joint quality. Finally, a comparison between joints produced by forming with subsequent brazing and original tube is conducted, which presents the high performance of the developed procedure for forming assisted thermal joining.

Risk Factors for Neck and Upper Extremity Disorders among Computers Users and the Effect of Interventions: An Overview of Systematic Reviews

PubMed Central

Andersen, Johan H.; Fallentin, Nils; Thomsen, Jane F.; Mikkelsen, Sigurd

2011-01-01

Background To summarize systematic reviews that 1) assessed the evidence for causal relationships between computer work and the occurrence of carpal tunnel syndrome (CTS) or upper extremity musculoskeletal disorders (UEMSDs), or 2) reported on intervention studies among computer users/or office workers. Methodology/Principal Findings PubMed, Embase, CINAHL and Web of Science were searched for reviews published between 1999 and 2010. Additional publications were provided by content area experts. The primary author extracted all data using a purpose-built form, while two of the authors evaluated the quality of the reviews using recommended standard criteria from AMSTAR; disagreements were resolved by discussion. The quality of evidence syntheses in the included reviews was assessed qualitatively for each outcome and for the interventions. Altogether, 1,349 review titles were identified, 47 reviews were retrieved for full text relevance assessment, and 17 reviews were finally included as being relevant and of sufficient quality. The degrees of focus and rigorousness of these 17 reviews were highly variable. Three reviews on risk factors for carpal tunnel syndrome were rated moderate to high quality, 8 reviews on risk factors for UEMSDs ranged from low to moderate/high quality, and 6 reviews on intervention studies were of moderate to high quality. The quality of the evidence for computer use as a risk factor for CTS was insufficient, while the evidence for computer use and UEMSDs was moderate regarding pain complaints and limited for specific musculoskeletal disorders. From the reviews on intervention studies no strong evidence based recommendations could be given. Conclusions/Significance Computer use is associated with pain complaints, but it is still not very clear if this association is causal. The evidence for specific disorders or diseases is limited. No effective interventions have yet been documented. PMID:21589875

[Quality by design approaches for pharmaceutical development and manufacturing of Chinese medicine].

PubMed

Xu, Bing; Shi, Xin-Yuan; Wu, Zhi-Sheng; Zhang, Yan-Ling; Wang, Yun; Qiao, Yan-Jiang

2017-03-01

The pharmaceutical quality was built by design, formed in the manufacturing process and improved during the product's lifecycle. Based on the comprehensive literature review of pharmaceutical quality by design (QbD), the essential ideas and implementation strategies of pharmaceutical QbD were interpreted. Considering the complex nature of Chinese medicine, the "4H" model was innovated and proposed for implementing QbD in pharmaceutical development and industrial manufacture of Chinese medicine product. "4H" corresponds to the acronym of holistic design, holistic information analysis, holistic quality control, and holistic process optimization, which is consistent with the holistic concept of Chinese medicine theory. The holistic design aims at constructing both the quality problem space from the patient requirement and the quality solution space from multidisciplinary knowledge. Holistic information analysis emphasizes understanding the quality pattern of Chinese medicine by integrating and mining multisource data and information at a relatively high level. The batch-to-batch quality consistence and manufacturing system reliability can be realized by comprehensive application of inspective quality control, statistical quality control, predictive quality control and intelligent quality control strategies. Holistic process optimization is to improve the product quality and process capability during the product lifecycle management. The implementation of QbD is useful to eliminate the ecosystem contradictions lying in the pharmaceutical development and manufacturing process of Chinese medicine product, and helps guarantee the cost effectiveness. Copyright© by the Chinese Pharmaceutical Association.

Strategies for Increasing the Market Share of Recycled Products—A Games Theory Approach

NASA Astrophysics Data System (ADS)

Batzias, Dimitris F.; Pollalis, Yannis A.

2009-08-01

A methodological framework (including 28 activity stages and 10 decision nodes) has been designed under the form of an algorithmic procedure for the development of strategies for increasing the market share of recycled products within a games theory context. A case example is presented referring to a paper market, where a recycling company (RC) is in competition with a virgin-raw-material-using company (VC). The strategies of the VC, for increasing its market share, are the strengthening of (and advertisement based on) the high quality (VC1), the high reliability (VC2), the combination quality and reliability, putting emphasis on the first component (VC3), the combination quality and reliability, putting emphasis on the second component (VC4). The strategies of the RC, for increasing its market share, are proper advertisement based on the low price of produced recycled paper satisfying minimum quality requirements (RC1), the combination of low price with sensitization of the public as regards environmental and materials-saving issues, putting emphasis on the first component (RC2), the same combination, putting emphasis on the second component (RC3). Analysis of all possible situations for the case example under examination is also presented.

Hong Kong men with low incomes have worse health-related quality of life as judged by SF-36 scores.

PubMed

Ko, G T C; Wai, H P S; Tsang, P C C; Chan, H C K

2006-10-01

To analyse the association between income and health-related quality of life using the Medical Outcome Study Short Form 36 (SF-36) Chinese version in Hong Kong Chinese working population. Cross-sectional observation study. A commercial company in Hong Kong. All clerical and administrative staff of a commercial company was invited to participate; 876 of the 1003 staff agreed. The subjects were categorised into three income groups according to monthly income in Hong Kong dollars (low, < or =10,000; middle, >10,000-25,000; high, >25,000). The mean age of the 288 men and 588 women was 34.9 (standard deviation, 7.9; median, 34.0; range, 18-71) years. SF-36 scores on health-related quality of life. The distribution of income was 30% in high-, 54.8% in middle-, and 15.2% in low-income groups. Women had similar SF-36 scores among different income groups. In men, for most variables there was a significant positive linear correlation between income and SF-36 scores. Low income is associated with a worse health-related quality of life in Hong Kong Chinese men.

High-beam quality, high-efficiency laser based on fiber with heavily Yb(3+)-doped phosphate core and silica cladding.

PubMed

Egorova, O N; Semjonov, S L; Medvedkov, O I; Astapovich, M S; Okhrimchuk, A G; Galagan, B I; Denker, B I; Sverchkov, S E; Dianov, E M

2015-08-15

We have fabricated and tested a composite fiber with an Yb(3+)-doped phosphate glass core and silica cladding. Oscillation with a slope efficiency of 74% was achieved using core pumping at 976 nm with fiber lengths of 48-90 mm in a simple laser configuration, where the cavity was formed by a high-reflectivity Bragg grating and the cleaved fiber end. The measured M(2) factors were as low as 1.05-1.22 even though the fiber was multimode at the lasing wavelength.

Neurofeedback as a form of cognitive rehabilitation therapy following stroke: A systematic review

PubMed Central

Tibbles, Alana; Topolovec-Vranic, Jane

2017-01-01

Neurofeedback therapy (NFT) has been used within a number of populations however it has not been applied or thoroughly examined as a form of cognitive rehabilitation within a stroke population. Objectives for this systematic review included: i) identifying how NFT is utilized to treat cognitive deficits following stroke, ii) examining the strength and quality of evidence to support the use of NFT as a form of cognitive rehabilitation therapy (CRT) and iii) providing recommendations for future investigations. Searches were conducted using OVID (Medline, Health Star, Embase + Embase Classic) and PubMed databases. Additional searches were completed using the Cochrane Reviews library database, Google Scholar, the University of Toronto online library catalogue, ClinicalTrials.gov website and select journals. Searches were completed Feb/March 2015 and updated in June/July/Aug 2015. Eight studies were eligible for inclusion in this review. Studies were eligible for inclusion if they: i) were specific to a stroke population, ii) delivered CRT via a NFT protocol, iii) included participants who were affected by a cognitive deficit(s) following stroke (i.e. memory loss, loss of executive function, speech impairment etc.). NFT protocols were highly specific and varied within each study. The majority of studies identified improvements in participant cognitive deficits following the initiation of therapy. Reviewers assessed study quality using the Downs and Black Checklist for Measuring Study Quality tool; limited study quality and strength of evidence restricted generalizability of conclusions regarding the use of this therapy to the greater stroke population. Progression in this field requires further inquiry to strengthen methodology quality and study design. Future investigations should aim to standardize NFT protocols in an effort to understand the dose-response relationship between NFT and improvements in functional outcome. Future investigations should also place a large emphasis on long-term participant follow-up. PMID:28510578

Neurofeedback as a form of cognitive rehabilitation therapy following stroke: A systematic review.

PubMed

Renton, Tian; Tibbles, Alana; Topolovec-Vranic, Jane

2017-01-01

Neurofeedback therapy (NFT) has been used within a number of populations however it has not been applied or thoroughly examined as a form of cognitive rehabilitation within a stroke population. Objectives for this systematic review included: i) identifying how NFT is utilized to treat cognitive deficits following stroke, ii) examining the strength and quality of evidence to support the use of NFT as a form of cognitive rehabilitation therapy (CRT) and iii) providing recommendations for future investigations. Searches were conducted using OVID (Medline, Health Star, Embase + Embase Classic) and PubMed databases. Additional searches were completed using the Cochrane Reviews library database, Google Scholar, the University of Toronto online library catalogue, ClinicalTrials.gov website and select journals. Searches were completed Feb/March 2015 and updated in June/July/Aug 2015. Eight studies were eligible for inclusion in this review. Studies were eligible for inclusion if they: i) were specific to a stroke population, ii) delivered CRT via a NFT protocol, iii) included participants who were affected by a cognitive deficit(s) following stroke (i.e. memory loss, loss of executive function, speech impairment etc.). NFT protocols were highly specific and varied within each study. The majority of studies identified improvements in participant cognitive deficits following the initiation of therapy. Reviewers assessed study quality using the Downs and Black Checklist for Measuring Study Quality tool; limited study quality and strength of evidence restricted generalizability of conclusions regarding the use of this therapy to the greater stroke population. Progression in this field requires further inquiry to strengthen methodology quality and study design. Future investigations should aim to standardize NFT protocols in an effort to understand the dose-response relationship between NFT and improvements in functional outcome. Future investigations should also place a large emphasis on long-term participant follow-up.

Effects of T'ai Chi exercise on fibromyalgia symptoms and health-related quality of life.

PubMed

Taggart, Helen M; Arslanian, Christine L; Bae, Sejong; Singh, Karan

2003-01-01

Fibromyalgia (FM), one of the most common musculoskeletal disorders, is associated with high levels of impaired health and inadequate or limited symptom relief. The cause of this complex syndrome is unknown, and there is no known cure. Numerous research results indicate that a combination of physical exercise and mind-body therapy is effective in symptom management. T'ai Chi, an ancient Chinese exercise, combines physical exercise with mindbody therapy. To investigate the effects of T'ai Chi exercise on FM symptoms and health-related quality of life. Pilot study, one group pre-to-post posttest design. Participants with FM (n = 39) formed a single group for 6 weeks of 1-hour, twice weekly T'ai Chi exercise classes. FM symptoms and health-related quality of life were measured before and after exercise. Twenty-one participants completed at least 10 of the 12 exercise sessions. Although the dropout rate was higher than expected, measurements on both the Fibromyalgia Impact Questionnaire (FIQ) (Buckhardt, Clark, & Bennett, 1991) and the Short Form-36 (SE-36) (Ware & Sherbourne, 1992) revealed statistically significant improvement in symptom management and health-related quality of life. Knowledge of interventions to enhance health for the patient with musculoskeletal problems is a National Association of Orthopaedic Nurses priority. Tai Chi is potentially beneficial to patients with FM. Further research is needed to support evidence-based practice.

Intercoder Reliability of Mapping Between Pharmaceutical Dose Forms in the German Medication Plan and EDQM Standard Terms.

PubMed

Sass, Julian; Becker, Kim; Ludmann, Dominik; Pantazoglou, Elisabeth; Dewenter, Heike; Thun, Sylvia

2018-01-01

A nationally uniform medication plan has recently been part of German legislation. The specification for the German medication plan was developed in cooperation between various stakeholders of the healthcare system. Its' goal is to enhance usability and interoperability while also providing patients and physicians with the necessary information they require for a safe and high-quality therapy. Within the research and development project named Medication Plan PLUS, the specification of the medication plan was tested and reviewed for semantic interoperability in particular. In this study, the list of pharmaceutical dose forms provided in the specification was mapped to the standard terms of the European Directorate for the Quality of Medicines & HealthCare by different coders. The level of agreement between coders was calculated using Cohen's Kappa (κ). Results show that less than half of the dose forms could be coded with EDQM standard terms. In addition to that Kappa was found to be moderate, which means rather unconvincing agreement among coders. In conclusion, there is still vast room for improvement in utilization of standardized international vocabulary and unused potential considering cross-border eHealth implementations in the future.

High collimated coherent illumination for reconstruction of digitally calculated holograms: design and experimental realization

NASA Astrophysics Data System (ADS)

Morozov, Alexander; Dubinin, German; Dubynin, Sergey; Yanusik, Igor; Kim, Sun Il; Choi, Chil-Sung; Song, Hoon; Lee, Hong-Seok; Putilin, Andrey; Kopenkin, Sergey; Borodin, Yuriy

2017-06-01

Future commercialization of glasses-free holographic real 3D displays requires not only appropriate image quality but also slim design of backlight unit and whole display device to match market needs. While a lot of research aimed to solve computational issues of forming Computer Generated Holograms for 3D Holographic displays, less focus on development of backlight units suitable for 3D holographic display applications with form-factor of conventional 2D display systems. Thereby, we report coherent backlight unit for 3D holographic display with thickness comparable to commercially available 2D displays (cell phones, tablets, laptops, etc.). Coherent backlight unit forms uniform, high-collimated and effective illumination of spatial light modulator. Realization of such backlight unit is possible due to holographic optical elements, based on volume gratings, constructing coherent collimated beam to illuminate display plane. Design, recording and measurement of 5.5 inch coherent backlight unit based on two holographic optical elements are presented in this paper.

Morphological and structural evolution on the lateral face of the diamond seed by MPCVD homoepitaxial deposition

NASA Astrophysics Data System (ADS)

Chen, Jianli; Wang, Guangjian; Qi, Chengjun; Zhang, Ying; Zhang, Song; Xu, Yongkuan; Hao, Jianmin; Lai, Zhanping; Zheng, Lili

2018-02-01

This paper presents a recent study on the morphology variation on the lateral faces of a HPHT diamond seed by MPCVD method. Raman spectroscopy and SEM were used to display the morphological and structural evolution of the grown diamond. It has been observed that different types of carbon allotropes were deposited at different heights of the substrate. At the bottom of the substrate, the feature of the lateral face was dominated by vertically aligned graphite nanoplatelets. An increment of sp3 and sp2 hybridized carbons was found to take over at the region of approximately 100 μm above from the bottom followed by the increasing-size diamond grains. The high quality single crystalline diamond was formed at the top of the lateral face. We proposed that the temperature gradient around the substrate is responsible for variable features on the substrate lateral face. By optimizing the growth temperature, we have obtained an enlarged area of the lateral face with high quality single crystalline diamond. This work will provide both sp2 on sp3 carbon materials for the development of electrochemical sensors and electrodes, and a foundation for the diamond lateral face growth with high quality and high purity.

Spin accumulation in Si channels using CoFe/MgO/Si and CoFe/AlO{sub x}/Si tunnel contacts with high quality tunnel barriers prepared by radical-oxygen annealing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akushichi, T., E-mail: taiju.aku7@isl.titech.ac.jp; Shuto, Y.; Sugahara, S., E-mail: sugahara@isl.titech.ac.jp

We investigate spin injection into Si channels using three-terminal spin-accumulation (3T-SA) devices with high-quality CoFe/MgO/n-Si and CoFe/AlO{sub x}/n-Si tunnel spin-injectors whose tunnel barriers are formed by radical oxidation of Mg and Al thin films deposited on Si(100) substrates and successive annealing under radical-oxygen exposure. When the MgO and AlO{sub x} barriers are not treated by the radical-oxygen annealing, the Hanle-effect signals obtained from the 3T-SA devices are closely fitted by a single Lorentz function representing a signal due to trap spins. On the other hand, when the tunnel barriers are annealed under radical-oxygen exposure, the Hanle-effect signals can be accuratelymore » fitted by the superposition of a Lorentz function and a non-Lorentz function representing a signal due to accumulated spins in the Si channel. These results suggest that the quality improvement of tunnel barriers treated by radical-oxygen annealing is highly effective for spin-injection into Si channels.« less

Indirect effects of habitat disturbance on invasion: nutritious litter from a grazing resistant plant favors alien over native Collembola.

PubMed

Leinaas, Hans Petter; Bengtsson, Jan; Janion-Scheepers, Charlene; Chown, Steven L

2015-08-01

Biological invasions are major threats to biodiversity, with impacts that may be compounded by other forms of environmental change. Observations of high density of the invasive springtail (Collembola), Hypogastrura manubrialis in heavily grazed renosterveld vegetation in the Western Cape, South Africa, raised the question of whether the invasion was favored by changes in plant litter quality associated with habitat disturbance in this vegetation type. To examine the likely mechanisms underlying the high abundance of H. manubrialis, cages with three types of naturally occurring litter with different nutrient content were placed out in the area and collected after different periods of time. Hypogastrura manubrialis was mainly found in the nutrient-rich litter of the yellowbush (Galenia africana), which responds positively to disturbance in the form of overgrazing. This suggests that invasion may have been facilitated by a positive interaction with this grazing resistant plant. By contrast, indigenous Collembola were least abundant in yellowbush litter. Negative correlations between high abundance of H. manubrialis and the abundance and diversity of other species suggest that competitive interactions might underlie low abundance of these other species at the patch level. Group behavior enables H. manubrialis to utilize efficiently this ephemeral, high quality resource, and might improve its competitive ability. The results suggest that interactions among environmental change drivers may lead to unforeseen invasion effects. H. manubrialis is not likely to be very successful in un-grazed renosterveld, but in combination with grazing, favoring the nutrient-rich yellowbush, it may become highly invasive. Field manipulations are required to fully verify these conclusions.

Indirect effects of habitat disturbance on invasion: nutritious litter from a grazing resistant plant favors alien over native Collembola

PubMed Central

Leinaas, Hans Petter; Bengtsson, Jan; Janion-Scheepers, Charlene; Chown, Steven L

2015-01-01

Biological invasions are major threats to biodiversity, with impacts that may be compounded by other forms of environmental change. Observations of high density of the invasive springtail (Collembola), Hypogastrura manubrialis in heavily grazed renosterveld vegetation in the Western Cape, South Africa, raised the question of whether the invasion was favored by changes in plant litter quality associated with habitat disturbance in this vegetation type. To examine the likely mechanisms underlying the high abundance of H. manubrialis, cages with three types of naturally occurring litter with different nutrient content were placed out in the area and collected after different periods of time. Hypogastrura manubrialis was mainly found in the nutrient-rich litter of the yellowbush (Galenia africana), which responds positively to disturbance in the form of overgrazing. This suggests that invasion may have been facilitated by a positive interaction with this grazing resistant plant. By contrast, indigenous Collembola were least abundant in yellowbush litter. Negative correlations between high abundance of H. manubrialis and the abundance and diversity of other species suggest that competitive interactions might underlie low abundance of these other species at the patch level. Group behavior enables H. manubrialis to utilize efficiently this ephemeral, high quality resource, and might improve its competitive ability. The results suggest that interactions among environmental change drivers may lead to unforeseen invasion effects. H. manubrialis is not likely to be very successful in un-grazed renosterveld, but in combination with grazing, favoring the nutrient-rich yellowbush, it may become highly invasive. Field manipulations are required to fully verify these conclusions. PMID:26380678

The Formation and Characterization of GaN Hexagonal Pyramids

NASA Astrophysics Data System (ADS)

Zhang, Shi-Ying; Xiu, Xiang-Qian; Lin, Zeng-Qin; Hua, Xue-Mei; Xie, Zi-Li; Zhang, Rong; Zheng, You-Dou

2013-05-01

GaN with hexagonal pyramids is fabricated using the photo-assisted electroless chemical etching method. Defective areas of the GaN substrate are selectively etched in a mixed solution of KOH and K2S2O8 under ultraviolet illumination, producing submicron-sized pyramids. Hexagonal pyramids on the etched GaN with well-defined {101¯1¯} facets and very sharp tips are formed. High-resolution x-ray diffraction shows that etched GaN with pyramids has a higher crystal quality, and micro-Raman spectra reveal a tensile stress relaxation in GaN with pyramids compared with normal GaN. The cathodoluminescence intensity of GaN after etching is significantly increased by three times, which is attributed to the reduction in the internal reflection, high-quality GaN with pyramids and the Bragg effect.

Resolving Identification Issues of Saraca asoca from Its Adulterant and Commercial Samples Using Phytochemical Markers

PubMed Central

Hegde, Satisha; Hegde, Harsha Vasudev; Jalalpure, Sunil Satyappa; Peram, Malleswara Rao; Pai, Sandeep Ramachandra; Roy, Subarna

2017-01-01

Saraca asoca (Roxb.) De Wilde (Ashoka) is a highly valued endangered medicinal tree species from Western Ghats of India. Besides treating cardiac and circulatory problems, S. asoca provides immense relief in gynecological disorders. Higher price and demand, in contrast to the smaller population size of the plant, have motivated adulteration with other plants such as Polyalthia longifolia (Sonnerat) Thwaites. The fundamental concerns in quality control of S. asoca arise due to its part of medicinal value (Bark) and the chemical composition. Phytochemical fingerprinting with proper selection of analytical markers is a promising method in addressing quality control issues. In the present study, high-performance liquid chromatography of phenolic compounds (gallic acid, catechin, and epicatechin) coupled to multivariate analysis was used. Five samples each of S. asoca, P. longifolia from two localities alongside five commercial market samples showed evidence of adulteration. Subsequently, multivariate hierarchical cluster analysis and principal component analysis was established to discriminate the adulterants of S. asoca. The proposed method ascertains identification of S. asoca from its putative adulterant P. longifolia and commercial market samples. The data generated may also serve as baseline data to form a quality standard for pharmacopoeias. SUMMARY Simultaneous quantification of gallic acid, catechin, epicatechin from Saraca asoca by high-performance liquid chromatographyDetection of S. asoca from adulterant and commercial samplesUse of analytical method along with a statistical tool for addressing quality issues. Abbreviations used: HPLC: High Performance Liquid Chromatography; RP-HPLC: Reverse Phase High Performance Liquid Chromatography; CAT: Catechin; EPI: Epicatechin; GA: Gallic acid; PCA: Principal Component Analysis. PMID:28808391

Methods for Preparing Nanoparticle-Containing Thermoplastic Composite Laminates

NASA Technical Reports Server (NTRS)

Jensen, Brian J. (Inventor); Cano, Roberto J. (Inventor); Gruber, Mark B. (Inventor)

2016-01-01

High quality thermoplastic composites and composite laminates containing nanoparticles and/or nanofibers, and methods of producing such composites and laminates are disclosed. The composites comprise a thermoplastic polymer and a plurality of nanoparticles, and may include a fibrous structural reinforcement. The composite laminates are formed from a plurality of nanoparticle-containing composite layers and may be fused to one another via an automated process.

Changes in sediment yield and stream morphology in an actively managed forested watershed due to upstream disturbances

Treesearch

Ilkim Cavus; Latif Kalin; Ferhat Kara

2016-01-01

Attaining high quality water has always been a big concern for humankind. Forested watersheds are known to provide the cleanest form of water. However, conversion of forested lands to agricultural and/or urban use, as well as disturbances created in forested watersheds lead to degradation and deterioration of our water resources.

Inert-Gas Diffuser For Plasma Or Arc Welding

NASA Technical Reports Server (NTRS)

Gilbert, Jeffrey L.; Spencer, Carl N.; Hosking, Timothy J.

1994-01-01

Inert-gas diffuser provides protective gas cover for weld bead as it cools. Follows welding torch, maintaining continuous flow of argon over newly formed joint and prevents it from oxidizing. Helps to ensure welds of consistently high quality. Devised for plasma arc keyhole welding of plates of 0.25-in. or greater thickness, also used in tungsten/inert-gas and other plasma or arc welding processes.

Resin infiltration transfer technique

DOEpatents

Miller, David V [Pittsburgh, PA; Baranwal, Rita [Glenshaw, PA

2009-12-08

A process has been developed for fabricating composite structures using either reaction forming or polymer infiltration and pyrolysis techniques to densify the composite matrix. The matrix and reinforcement materials of choice can include, but are not limited to, silicon carbide (SiC) and zirconium carbide (ZrC). The novel process can be used to fabricate complex, net-shape or near-net shape, high-quality ceramic composites with a crack-free matrix.

League Tables Must Go: There Are Better Ways of Ensuring a Quality Education for All Our Children

ERIC Educational Resources Information Center

James, Mary

2015-01-01

Despite claims made for them, many current education policies have perverse consequences. If all our children are to benefit from the good education they deserve, we need: forms of accountability that do not rely on school performance tables of test results; a focus on standards that embody high expectations for all; the urgent creation of a…

Quality College and University Instructional Physical Activity Programs Contribute to "Mens Sana in Corpore Sano, The Good Life," and Healthy Societies

ERIC Educational Resources Information Center

Cardinal, Bradley J.

2017-01-01

Physical education debuted in higher education in 1860 at Amherst College. The program, aimed at the general student body, thrived under the leadership of Edward Hitchcock, Jr., M.D. Similar programs were developed elsewhere. At its high point, an estimated 97% of colleges and universities required their students to partake in some form of…

Fast and Focused: Accelerated Degree Programs Keep Students Locked in on Learning. Lumina Foundation Focus™. Fall 2013

ERIC Educational Resources Information Center

Giegerich, Steve

2013-01-01

Employers point to a large and growing "skills gap," saying thousands of jobs are already going unfilled because applicants lack the skills and knowledge they need. Forecasters say that, by the end of this decade, two-thirds of all jobs will require some form of high-quality postsecondary credential such as a degree or certificate. The…

The six critical attributes of the next generation of quality management software systems.

PubMed

Clark, Kathleen

2011-07-01

Driven by both the need to meet regulatory requirements and a genuine desire to drive improved quality, quality management systems encompassing standard operating procedure, corrective and preventative actions and related processes have existed for many years, both in paper and electronic form. The impact of quality management systems on 'actual' quality, however, is often reported as far less than desired. A quality management software system that moves beyond formal forms-driven processes to include a true closed loop design, manage disparate processes across the enterprise, provide support for collaborative processes and deliver insight into the overall state of control has the potential to close the gap between simply accomplishing regulatory compliance and delivering measurable improvements in quality and efficiency.

Ecological engineering helps maximize function in algal oil production.

PubMed

Jackrel, Sara L; Narwani, Anita; Bentlage, Bastian; Levine, Robert B; Hietala, David C; Savage, Phillip E; Oakley, Todd H; Denef, Vincent J; Cardinale, Bradley J

2018-05-18

Algal biofuels have the potential to curb emissions of greenhouse gases from fossil fuels, but current growing methods fail to produce fuels that meet the multiple standards necessary for economical industrial use. For example, algae grown as monocultures for biofuel production have not simultaneously and economically achieved high yields of the high-quality, lipid-rich biomass desired for the industrial-scale production of bio-oil. Decades of study in the field of ecology have demonstrated that simultaneous increases in multiple functions, such as the quantity and quality of biomass, can occur in natural ecosystems by increasing biological diversity. Here we show that species consortia of algae can improve the production of bio-oil, which benefits from both high biomass yield and high quality of biomass rich in fatty acids. We explain the underlying causes of increased quantity and quality of algal biomass among species consortia by showing that, relative to monocultures, species consortia can differentially regulate lipid metabolism genes while growing to higher levels of biomass, in part due to greater utilization of nutrient resources. We identify multiple genes involved in lipid biosynthesis that are frequently upregulated in bicultures, and further show that these elevated levels of gene expression are highly predictive of the elevated levels in biculture relative to monoculture of multiple quality metrics of algal biomass. These results show that interactions between species can alter the expression of lipid metabolism genes, and further demonstrate that our understanding of diversity-function relationships from natural ecosystems can be harnessed to improve production of bio-oil. Importance section: Algal biofuels are one of the more promising forms of renewable energy. In our study, we investigate whether ecological interactions between species of microalgae regulate two important factors in cultivation - the biomass of the crop produced and quality of the biomass that is produced. We find that species interactions often improved production yields, especially the fatty acid content of the algal biomass, and that differentially expressed genes involved in fatty acid metabolism are predictive of improved quality metrics of bio-oil. Other studies have found that diversity often improves productivity and stability in agricultural and natural ecosystems. Our results provide further evidence that growing multi-species crops of microalgae may improve the production of high-quality biomass for bio-oil. Copyright © 2018 American Society for Microbiology.

Quality assessment of urban areas based on neural network modeling and GIS

NASA Astrophysics Data System (ADS)

Popova, Olga; Glebova, Julia; Pustovgar, Andrey

2018-03-01

In this article the authors carry out the research of the urban development areas structure and propose the system of its characteristics on the basis of sector affiliation of the municipal economy. The authors have developed an algorithm for quality assessment of urban development areas. The results of the research are presented on the example of several central quarters of Arkhangelsk city. The city's residential development was formed in the periods from 1900-1950, 1950-1980 and from 2002 to date. It is currently presented by low-rise wooden, homestead type residential houses and barracks-type houses; mid-rise and high-rise brick and panel buildings of typical development, buildings of large-panel housing construction. Structural SOM-analysis compiled separate quarters of Arkhangelsk into 5 groups with a high level of characteristic similarity: "Commercial", "Prospective complex development", "Sustainable development", "Perspective renovation of residential development", "Investment-unattractive". Typical development strategies for each group of quarters are determined. Most developed areas characterized by upward height. The development strategies for depressed areas is in a high-rise building, which show the economic, social and environmental benefits of upward growth of the city. Using GIS allows to visually reflect the state and assess the quality of the urban development area by the aggregate of all parameters, and also to assess the quality of the quarters for each sector.

Case studies in machine vision integration

NASA Astrophysics Data System (ADS)

Ahlers, Rolf-Juergen

1991-09-01

Many countries in the world, e.g. Germany and Japan, depend on high export rates. It is therefore necessary for them to strive for a high degree of quality in the products and processes exported. The example of Japan shows in a significant manner that a competitor should not be feared just because he can offer cheaper products. They become a "source of danger" when these products also achieve a high degree of quality. Thus, survival in the market depends on the ability to recognize the implications of technical and economic developments, to draw the perhaps unpopular conclusions for production, and to make the right decisions. This particularly applies to measurement and inspection equipment for quality control. Here, besides electro-optical sensors in general, image processing systems play an important role because they can emulate the conventional form of visual inspection by a human operator — i.e., the methods used in industry when dealing with quality inspection and control. In combination with precision indexing tables and industrial robots, image processing systems can be extended to new fields of application. The great awareness of the potential applications of vision and image processing systems has led to a variety of realized applications, some of which will be described below under three topics: • electro-optical measurement systems, • automation of visual inspection tasks, and • robot guidance.

Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%

NASA Astrophysics Data System (ADS)

Bi, Dongqin; Yi, Chenyi; Luo, Jingshan; Décoppet, Jean-David; Zhang, Fei; Zakeeruddin, Shaik Mohammed; Li, Xiong; Hagfeldt, Anders; Grätzel, Michael

2016-10-01

The past several years have witnessed the rapid emergence of a class of solar cells based on mixed organic-inorganic halide perovskites. Today’s state-of-the-art perovskite solar cells (PSCs) employ various methods to enhance nucleation and improve the smoothness of the perovskite films formed via solution processing. However, the lack of precise control over the crystallization process creates a risk of forming unwanted defects, for example, pinholes and grain boundaries. Here, we introduce an approach to prepare perovskite films of high electronic quality by using poly(methyl methacrylate) (PMMA) as a template to control nucleation and crystal growth. We obtain shiny smooth perovskite films of excellent electronic quality, as manifested by a remarkably long photoluminescence lifetime. We realize stable PSCs with excellent reproducibility showing a power conversion efficiency (PCE) of up to 21.6% and a certified PCE of 21.02% under standard AM 1.5G reporting conditions.

Water-quality characteristics in runoff for three discovery farms in North Dakota, 2008-12

USGS Publications Warehouse

Nustad, Rochelle A.; Rowland, Kathleen M.; Wiederholt, Ronald

2015-01-01

Consistent patterns in water quality emerged at each individual farm, but similarities among farms also were observed. Suspended sediment, total phosphorus, and ammonia concentrations generally decreased downstream from feeding areas, and were primarily affected by surface runoff processes such as dilution, settling out of sediment, or vegetative uptake. Because surface runoff affects these constituents, increased annual surface runoff volume tended to result in increased loads and yields. No significant change in nitrate plus nitrite concentration were observed downstream from feeding areas because additional processes such as high solubility, nitrification, denitrification, and surface-groundwater interaction affect nitrate plus nitrite. For nitrate plus nitrite, increases in annual runoff volume did not consistently relate to increases in annual loads and yields. It seems that temporal distribution of precipitation and surface-groundwater interaction affected nitrate plus nitrite loads and yields. For surface drainage sites, the primary form of nitrogen was organic nitrogen whereas for subsurface drainage sites, the primary form of nitrogen was nitrate plus nitrite nitrogen.

Characteristics of iron corrosion scales and water quality variations in drinking water distribution systems of different pipe materials.

PubMed

Li, Manjie; Liu, Zhaowei; Chen, Yongcan; Hai, Yang

2016-12-01

Interaction between old, corroded iron pipe surfaces and bulk water is crucial to the water quality protection in drinking water distribution systems (WDS). Iron released from corrosion products will deteriorate water quality and lead to red water. This study attempted to understand the effects of pipe materials on corrosion scale characteristics and water quality variations in WDS. A more than 20-year-old hybrid pipe section assembled of unlined cast iron pipe (UCIP) and galvanized iron pipe (GIP) was selected to investigate physico-chemical characteristics of corrosion scales and their effects on water quality variations. Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectroscopy (EDS), Inductively Coupled Plasma (ICP) and X-ray Diffraction (XRD) were used to analyze micromorphology and chemical composition of corrosion scales. In bench testing, water quality parameters, such as pH, dissolved oxygen (DO), oxidation reduction potential (ORP), alkalinity, conductivity, turbidity, color, Fe 2+ , Fe 3+ and Zn 2+ , were determined. Scale analysis and bench-scale testing results demonstrated a significant effect of pipe materials on scale characteristics and thereby water quality variations in WDS. Characteristics of corrosion scales sampled from different pipe segments show obvious differences, both in physical and chemical aspects. Corrosion scales were found highly amorphous. Thanks to the protection of zinc coatings, GIP system was identified as the best water quality stability, in spite of high zinc release potential. It is deduced that the complicated composition of corrosion scales and structural break by the weld result in the diminished water quality stability in HP system. Measurement results showed that iron is released mainly in ferric particulate form. Copyright © 2016 Elsevier Ltd. All rights reserved.

Silicon-on-insulator (SOI) active pixel sensors with the photosite implemented in the substrate

NASA Technical Reports Server (NTRS)

Pain, Bedabrata (Inventor); Zheng, Xinyu (Inventor)

2002-01-01

Active pixel sensors for a high quality imager are fabricated using a silicon-on-insulator (SOI) process by integrating the photodetectors on the SOI substrate and forming pixel readout transistors on the SOI thin-film. The technique can include forming silicon islands on a buried insulator layer disposed on a silicon substrate and selectively etching away the buried insulator layer over a region of the substrate to define a photodetector area. Dopants of a first conductivity type are implanted to form a signal node in the photodetector area and to form simultaneously drain/source regions for a first transistor in at least a first one of the silicon islands. Dopants of a second conductivity type are implanted to form drain/source regions for a second transistor in at least a second one of the silicon islands. Isolation rings around the photodetector also can be formed when dopants of the second conductivity type are implanted. Interconnections among the transistors and the photodetector are provided to allow signals sensed by the photodetector to be read out via the transistors formed on the silicon islands.

Silicon-on-insulator (SOI) active pixel sensors with the photosite implemented in the substrate

NASA Technical Reports Server (NTRS)

Zheng, Xinyu (Inventor); Pain, Bedabrata (Inventor)

2005-01-01

Active pixel sensors for a high quality imager are fabricated using a silicon-on-insulator (SOI) process by integrating the photodetectors on the SOI substrate and forming pixel readout transistors on the SOI thin-film. The technique can include forming silicon islands on a buried insulator layer disposed on a silicon substrate and selectively etching away the buried insulator layer over a region of the substrate to define a photodetector area. Dopants of a first conductivity type are implanted to form a signal node in the photodetector area and to form simultaneously drain/source regions for a first transistor in at least a first one of the silicon islands. Dopants of a second conductivity type are implanted to form drain/source regions for a second transistor in at least a second one of the silicon islands. Isolation rings around the photodetector also can be formed when dopants of the second conductivity type are implanted. Interconnections among the transistors and the photodetector are provided to allow signals sensed by the photodetector to be read out via the transistors formed on the silicon islands.

Half doses of PEG-ES and senna vs. high-dose senna for bowel cleansing before colonoscopy: a randomized, investigator-blinded trial.

PubMed

Amato, Arnaldo; Radaelli, Franco; Paggi, Silvia; Terruzzi, Vittorio

2010-03-01

Patients' compliance with and tolerance of large-volume polyethylene glycol electrolyte solution (PEG-ES) have prompted continuous investigation with alternative forms of cleansing. High-dose senna is superior to PEG-ES for the quality of bowel cleansing, patient compliance, and tolerance, but its acceptance may be influenced by the incidence of abdominal pain. We hypothesized that a combination of half doses of PEG-ES and senna could minimize the incidence of abdominal pain without affecting the quality of bowel preparation. This randomized, investigator-blinded trial has been conducted on consecutive outpatients scheduled for elective colonoscopy at a single community-based hospital. Patients were randomly assigned to receive either 12 tablets of 12 mg senna and 2 l of PEG-ES (half-dose group, HDG) or 24 tablets of senna divided in two doses (senna group, SG) the day before colonoscopy. The main outcome measures were the quality of colon cleansing (Aronchick scoring scale) and the incidence of preparation-related abdominal pain. Secondary outcome measures were patients' compliance with the cleansing regimen, overall tolerability, prevalence of predefined side effects, and quality of right colon cleansing. A total of 296 patients were enrolled (HDG=151 and SG=145). Overall cleansing was excellent to good in 90.1 and 88.3% patients in HDG and SG, respectively (P=0.62). Preparation-related moderate-to-severe abdominal pain was reported by 6% patients in HDG and 15.2% in SG (P=0.009). No significant differences were observed for secondary outcomes. The regimen combining half doses of PEG-ES and senna provides high-quality bowel preparation and acceptable patient tolerance, with less abdominal pain compared with high-dose senna.

Characteristics of national registries for occupational diseases: international development and validation of an audit tool (ODIT).

PubMed

Spreeuwers, Dick; de Boer, Angela G E M; Verbeek, Jos H A M; van Dijk, Frank J H

2009-10-23

The aim of the study was to develop quality indicators that can be used for quality assessment of registries of occupational diseases in relation to preventive policy on a national level. The research questions were: 1. Which indicators determine the quality of national registries of occupational diseases with respect to their ability to provide appropriate information for preventive policy? 2. What are the criteria that can distinguish low quality from high quality? First, we performed a literature search to assess which output of registries can be considered appropriate for preventive policy and to develop a set of preliminary indicators and criteria. Second, final indicators and criteria were assessed and their content validity was tested in a Delphi study, for which experts from the 25 EU Member States were invited. The literature search revealed two different types of information output to be appropriate for preventive policy: monitor and alert information. For the evaluation of the quality of the monitor and alert function we developed ten indicators and criteria. Sixteen of the twenty-five experts responded in the first round of the Delphi study, and eleven in the second round. Based on their comments, we assessed the final nine indicators: the completeness of the notification form, coverage of registration, guidelines or criteria for notification, education and training of reporting physicians, completeness of registration, statistical methods used, investigation of special cases, presentation of monitor information, and presentation of alert information. Except for the indicator "coverage of registration" for the alert function, all the indicators met the preset requirements of content validity. We have developed quality indicators and criteria to evaluate registries for occupational diseases on the ability to provide appropriate information for preventive policy on a national level. Together, these indicators form a tool which can be used for quality improvement of registries of occupational diseases.

[Impact of acid mining drainage on the quality of superficial waters and sediments in the Marrakesh region, Morocco].

PubMed

El Gharmali, A; Rada, A; El Adnani, M; Tahlil, N; El Meray, M; Nejmeddine, A

2004-12-01

The aim of the present study is the evaluation of the effects of the acid drainage of three abandoned mining sites: SB-Othmane, Kettara and Draâ-sfar, on water and sediment quality of the Tensift River and its two temporary tributaries, the Kettara and El-Coudia Oueds. These mining sites located near Marrakesh contain mining residues abandoned for ten to twenty years. They are presently in an agricultural region of the Haouz district. In each site, these uncontrolled mining residues present a high level of metallic sulphide and generate, during rainy periods, leaching products which have physical and chemical characteristics of acid mine drainage (AMD). These percolates display an acidic pH ranging from 2.5 to 5.2, a high electric conductivity, large amounts of sulphate and heavy metals, especially under dissolved form (e.g. Cd: 17.34 mg l(-1); Fe: 1734 mg l(-1); Zn: 3935 mg l(-1)). Except for Pb, the free ionic form is the most abundant metallic form, as showed by calculations using the speciation GEOCHEM program. The analysis of water and sediments of the surrounding superficial aquatic ecosystems shows a modification of water chemical facies and an enrichment in heavy metals, mainly under the solid phase for Fe, Pb, Cu, Co, Cr and Ni, and under dissolved fraction for Cd and Zn. The dissolved fraction of these metals is dominated by the free ionic form, considered as available for organisms. Furthermore, sediments contain important quantities of heavy metals (Pb: 1450 microg g(-1), Zn: 1562 microg g(-1)) with an available fraction which is higher than 40% for the Cd and Zn. The abundance of trace elements (free ionic and available forms) in water and sediment presents a durable risk of their transfer to food chains.

Multilayer ultra thick resist development for MEMS

NASA Astrophysics Data System (ADS)

Washio, Yasushi; Senzaki, Takahiro; Masuda, Yasuo; Saito, Koji; Obiya, Hiroyuki

2005-05-01

MEMS (Micro-Electro-Mechanical Systems) is achieved through a process technology, called Micro-machining. There are two distinct methods to manufacture a MEMS-product. One method is to form permanent film through photolithography, and the other is to form a non-permanent film resist after photolithography proceeded by etch or plating process. The three-dimensional ultra-fine processing technology based on photolithography, and is assembled by processes, such as anode junction, and post lithography processes such as etching and plating. Currently ORDYL PR-100 (Dry Film Type) is used for the permanent resist process. TOK has developed TMMR S2000 (Liquid Type) and TMMF S2000 (Dry Film Type) also. TOK has developed a new process utilizing these resist. The electro-forming method by photolithography is developed as one of the methods for enabling high resolution and high aspect formation. In recent years, it has become possible to manufacture conventionally difficult multilayer through our development with material and equipment project (M&E). As for material for electro-forming, it was checked that chemically amplified resist is optimal from the reaction mechanism as it is easily removed by the clean solution. Moreover, multiple plating formations were enabled with the resist through a new process. As for the equipment, TOK developed Applicator (It can apply 500 or more μms) and Developer, which achieves high throughput and quality. The detailed plating formations, which a path differs, and air wiring are realizable through M&E. From the above results, opposed to metallic mold plating, electro-forming method by resist, enabled to form high resolution and aspect pattern, at low cost. It is thought that the infinite possibility spreads by applying this process.

Readability and Content Assessment of Informed Consent Forms for Medical Procedures in Croatia

PubMed Central

Vučemilo, Luka; Borovečki, Ana

2015-01-01

Background High quality of informed consent form is essential for adequate information transfer between physicians and patients. Current status of medical procedure consent forms in clinical practice in Croatia specifically in terms of the readability and the content is unknown. The aim of this study was to assess the readability and the content of informed consent forms for diagnostic and therapeutic procedures used with patients in Croatia. Methods 52 informed consent forms from six Croatian hospitals on the secondary and tertiary health-care level were tested for reading difficulty using Simple Measure of Gobbledygook (SMOG) formula adjusted for Croatian language and for qualitative analysis of the content. Results The averaged SMOG grade of analyzed informed consent forms was 13.25 (SD 1.59, range 10–19). Content analysis revealed that informed consent forms included description of risks in 96% of the cases, benefits in 81%, description of procedures in 78%, alternatives in 52%, risks and benefits of alternatives in 17% and risks and benefits of not receiving treatment or undergoing procedures in 13%. Conclusions Readability of evaluated informed consent forms is not appropriate for the general population in Croatia. The content of the forms failed to include in high proportion of the cases description of alternatives, risks and benefits of alternatives, as well as risks and benefits of not receiving treatments or undergoing procedures. Data obtained from this research could help in development and improvement of informed consent forms in Croatia especially now when Croatian hospitals are undergoing the process of accreditation. PMID:26376183

Telecommunications Systems Career Ladder, AFSC 307XO.

DTIC Science & Technology

1981-01-01

standard test tone levels perform impulse noise tests make in-service or out-of- service quality check.s on composite signal transmission levels Even...service or out-of- service quality control (QC) reports maintain trouble and restoration record forms (DD Form 1443) direct circuit or system checks...include: perform fault isolation on analog circuits make in-service or out-of- service quality checks on voice frequency carrier telegraph (VFCT) terminals

RAPID COMMUNICATION: Magnetic resonance imaging inside metallic vessels

NASA Astrophysics Data System (ADS)

Han, Hui; Balcom, Bruce J.

2010-10-01

We introduce magnetic resonance imaging (MRI) measurements inside metallic vessels. Until now, MRI has been unusable inside metallic vessels because of eddy currents in the walls. We have solved the problem and generated high quality images by employing a magnetic field gradient monitoring method. The ability to image within metal enclosures and structures means many new samples and systems are now amenable to MRI. Most importantly this study will form the basis of new MRI-compatible metallic pressure vessels, which will permit MRI of macroscopic systems at high pressure.

Optical design for a breadboard high-resolution spectrometer for SIRTF/IRS

NASA Astrophysics Data System (ADS)

Brown, Robert J.; Houck, James R.; van Cleve, Jeffrey E.

1996-11-01

The optical design of a breadboard high resolution infrared spectrometer for the IRS instrument on the SIRTF mission is discussed. The spectrometer uses a crossed echelle grating configuration to cover the spectral region from 10 to 20 micrometer with a resolving power of approximately equals 600. The all reflective spectrometer forms a nearly diffraction limited image of the two dimensional spectrum on a 128 multiplied by 128 arsenic doped silicon area array with 75 micrometer pixels. The design aspects discussed include, grating numerology, image quality, packaging and alignment philosophy.

Paper-based silver-nanowire electronic circuits with outstanding electrical conductivity and extreme bending stability.

PubMed

Huang, Gui-Wen; Xiao, Hong-Mei; Fu, Shao-Yun

2014-08-07

Here a facile, green and efficient printing-filtration-press (PFP) technique is reported for room-temperature (RT) mass-production of low-cost, environmentally friendly, high performance paper-based electronic circuits. The as-prepared silver nanowires (Ag-NWs) are uniformly deposited at RT on a pre-printed paper substrate to form high quality circuits via vacuum filtration and pressing. The PFP circuit exhibits more excellent electrical property and bending stability compared with other flexible circuits made by existing techniques. Furthermore, practical applications of the PFP circuits are demonstrated.

Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique

NASA Astrophysics Data System (ADS)

Moayedfar, M.; Rani, A. M.; Hanaei, H.; Ahmad, A.; Tale, A.

2017-10-01

Incremental sheet forming is a flexible manufacturing process which uses the indenter point-to-point force to shape the sheet metal workpiece into manufactured parts in batch production series. However, the problem sometimes arising from this process is the low plastic point in the stress-strain diagram of the material which leads the low stretching amount before ultra-tensile strain point. Hence, a set of experiments is designed to find the optimum forming parameters in this process for optimum sheet thickness distribution while both sides of the sheet are considered for the surface quality improvement. A five-axis high-speed CNC milling machine is employed to deliver the proper motion based on the programming system while the clamping system for holding the sheet metal was a blank mould. Finally, an electron microscope and roughness machine are utilized to evaluate the surface structure of final parts, illustrate any defect may cause during the forming process and examine the roughness of the final part surface accordingly. The best interaction between parameters is obtained with the optimum values which lead the maximum sheet thickness distribution of 4.211e-01 logarithmic elongation when the depth was 24mm with respect to the design. This study demonstrates that this rapid forming method offers an alternative solution for surface quality improvement of 65% avoiding the low probability of cracks and low probability of crystal structure changes.

H2S-mediated thermal and photochemical methane activation.

PubMed

Baltrusaitis, Jonas; de Graaf, Coen; Broer, Ria; Patterson, Eric V

2013-12-02

Sustainable, low-temperature methods for natural gas activation are critical in addressing current and foreseeable energy and hydrocarbon feedstock needs. Large portions of natural gas resources are still too expensive to process due to their high content of hydrogen sulfide gas (H2S) mixed with methane, deemed altogether as sub-quality or "sour" gas. We propose a unique method of activation to form a mixture of sulfur-containing hydrocarbon intermediates, CH3SH and CH3SCH3 , and an energy carrier such as H2. For this purpose, we investigated the H2S-mediated methane activation to form a reactive CH3SH species by means of direct photolysis of sub-quality natural gas. Photoexcitation of hydrogen sulfide in the CH4 + H2S complex resulted in a barrierless relaxation by a conical intersection to form a ground-state CH3SH + H2 complex. The resulting CH3SH could further be coupled over acidic catalysts to form higher hydrocarbons, and the resulting H2 used as a fuel. This process is very different from conventional thermal or radical-based processes and can be driven photolytically at low temperatures, with enhanced control over the conditions currently used in industrial oxidative natural gas activation. Finally, the proposed process is CO2 neutral, as opposed to the current industrial steam methane reforming (SMR). Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effective Documentation Tools

NASA Technical Reports Server (NTRS)

Sleboda, Claire

1997-01-01

Quality assurance programs provide a very effective means to monitor and evaluate medical care. Quality assurance involves: (1) Identify a problem; (2) Determine the source and nature of the problem; (3) Develop policies and methods to effect improvement; (4) Implement those polices; (5) Monitor the methods applied; and (6) Evaluate their effectiveness. Because this definition of quality assurance so closely resembles the Nursing Process, the health unit staff was able to use their knowledge of the nursing process to develop many forms which improve the quality of patient care. These forms include the NASA DFRC Service Report, the occupational injury form (Incident Report), the patient survey (Pre-hospital Evaluation/Care Report), the Laboratory Log Sheet, the 911 Run Sheet, and the Patient Assessment Stamp. Examples and steps which are followed to generate these reports are described.

Toward of a highly integrated probe for improving wireless network quality

NASA Astrophysics Data System (ADS)

Ding, Fei; Song, Aiguo; Wu, Zhenyang; Pan, Zhiwen; You, Xiaohu

2016-10-01

Quality of service and customer perception is the focus of the telecommunications industry. This paper proposes a low-cost approach to the acquisition of terminal data, collected from LTE networks with the application of a soft probe, based on the Java language. The soft probe includes support for fast call in the form of a referenced library, and can be integrated into various Android-based applications to automatically monitor any exception event in the network. Soft probe-based acquisition of terminal data has the advantages of low cost and can be applied on large scale. Experiment shows that a soft probe can efficiently obtain terminal network data. With this method, the quality of service of LTE networks can be determined from acquired wireless data. This work contributes to efficient network optimization, and the analysis of abnormal network events.

Women with rheumatoid arthritis: non-vocational activities and quality of life.

PubMed

Reinseth, Lillian; Espnes, Geir Arild

2007-06-01

The aim of this study was to examine a possible relationship between partaking in non-vocational activities and health-related quality of life in women with rheumatoid arthritis (RA). Two questionnaires were completed by 45 women with RA aged from 25 to 80. The MOS Short-Form 36 (SF-36) measured the health-related quality of life and the Interest Checklist measured the amount of non-vocational activities performed. The present study revealed a significant decrease in non-vocational activities by the participants during the last 10 years. Mental health status seemed to be of greater importance than physical function to perform non-vocational activities in daily life. There were indications that a high number of activities performed correlated positively with scores on psychological well-being, and that a low amount of activities performed correlated with the psychological distress scores.

Effects of Processing Parameters on the Forming Quality of C-Shaped Thermosetting Composite Laminates in Hot Diaphragm Forming Process

NASA Astrophysics Data System (ADS)

Bian, X. X.; Gu, Y. Z.; Sun, J.; Li, M.; Liu, W. P.; Zhang, Z. G.

2013-10-01

In this study, the effects of processing temperature and vacuum applying rate on the forming quality of C-shaped carbon fiber reinforced epoxy resin matrix composite laminates during hot diaphragm forming process were investigated. C-shaped prepreg preforms were produced using a home-made hot diaphragm forming equipment. The thickness variations of the preforms and the manufacturing defects after diaphragm forming process, including fiber wrinkling and voids, were evaluated to understand the forming mechanism. Furthermore, both interlaminar slipping friction and compaction behavior of the prepreg stacks were experimentally analyzed for showing the importance of the processing parameters. In addition, autoclave processing was used to cure the C-shaped preforms to investigate the changes of the defects before and after cure process. The results show that the C-shaped prepreg preforms with good forming quality can be achieved through increasing processing temperature and reducing vacuum applying rate, which obviously promote prepreg interlaminar slipping process. The process temperature and forming rate in hot diaphragm forming process strongly influence prepreg interply frictional force, and the maximum interlaminar frictional force can be taken as a key parameter for processing parameter optimization. Autoclave process is effective in eliminating voids in the preforms and can alleviate fiber wrinkles to a certain extent.

Deposition of an Ultraflat Graphene Oxide Nanosheet on Atomically Flat Substrates

NASA Astrophysics Data System (ADS)

Khan, M. Z. H.; Shahed, S. M. F.; Yuta, N.; Komeda, T.

2017-07-01

In this study, graphene oxide (GO) sheets produced in the form of stable aqueous dispersions were deposited on Au (111), freshly cleaved mica, and highly oriented pyrolytic graphite (HOPG) substrates. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to study the presence and distinct contact of GO sheets on the substrates. It was revealed from the topography images that high-quality ultraflat GO monolayer sheets formed on the substrates without distinct cracking/wrinkling or folding. GO sheets with apparent height variation observed by microscopy also indicate ultraflat deposition with clear underlying steps. It was observed that ultrasonication and centrifuge steps prior to deposition were very effective for getting oxidation debris (OD)-free ultraflat single monolayer GO nanosheets onto substrates and that the process depends on the concentration of supplied GO solutions.

Premenopausal women with recurrent urinary tract infections have lower quality of life.

PubMed

Ennis, Siobhan S; Guo, Huifang; Raman, Lata; Tambyah, Paul A; Chen, Swaine L; Tiong, Ho Yee

2018-05-22

To examine the impact on quality of life of recurrent acute uncomplicated urinary tract infection among premenopausal Singaporean women, and to determine the risk factors for lower quality of life among these patients. A total of 85 patients with recurrent acute uncomplicated urinary tract infection who were referred to the Urology Department at the National University Hospital, Singapore, were prospectively recruited over a 3-year period to complete the validated Short Form 36 Health Survey version 1. In addition, demographic and clinical details including symptomology and medical history were analyzed for factors impacting quality of life. Short Form 36 Health Survey version 1 results were compared with published population norms. After adjusting for age, gender and race, recurrent acute uncomplicated urinary tract infection patients had significantly lower quality of life on seven out of eight Short Form 36 Health Survey version 1 domains when compared with age-, gender- and race-adjusted population norms for Singapore. Among those with recurrent acute uncomplicated urinary tract infection, those who also reported caffeine consumption had significantly lower Short Form 36 Health Survey version 1 scores than those who did not. Those who reported chronic constipation also had consistently lower Short Form 36 Health Survey version 1 scores across all domains. Recurrent acute uncomplicated urinary tract infection has a negative impact on the quality of life of premenopausal, otherwise healthy women. Recurrent acute uncomplicated urinary tract infection patients who also have chronic constipation or consume caffeine have lower quality of life than those who do not. More studies are required to understand the relationships between these common problems and risk factors. © 2018 The Japanese Urological Association.

Laser-assisted metal spinning for an efficient and flexible processing of challenging materials

NASA Astrophysics Data System (ADS)

Brummer, C.; Eck, S.; Marsoner, S.; Arntz, K.; Klocke, F.

2016-03-01

The demand for components made from high performance materials like titanium or nickel-based alloys as well as strain-hardening stainless steel is steadily increasing. However, conventional forming operations conducted on these materials are generally very laborious and time-consuming. This is where the limitations of metal spinning also become apparent. Using a laser to apply heat localized to the forming zone during metal spinning facilitates to enhance the formability of a material. In order to analyse the potential of the new manufacturing process, experimental investigations on laser-assisted shear forming and multi-pass metal spinning have been performed with austenitic stainless steel X5CrNi18-10, nickel-based alloy Inconel 718 and titanium grade 2. It could be demonstrated that the formability of these materials can be enhanced by laser-assistance. Besides the resulting enhancement of forming limits for metal spinning of challenging materials, the forming forces were reduced and the product quality was improved significantly.

Single liquid source plasma-enhanced metalorganic chemical vapor deposition of high-quality YBa2Cu3O(7-x) thin films

NASA Technical Reports Server (NTRS)

Zhang, Jiming; Gardiner, Robin A.; Kirlin, Peter S.; Boerstler, Robert W.; Steinbeck, John

1992-01-01

High quality YBa2Cu3O(7-x) films were grown in-situ on LaAlO3 (100) by a novel single liquid source plasma-enhanced metalorganic chemical vapor deposition process. The metalorganic complexes M(thd) (sub n), (thd = 2,2,6,6-tetramethyl-3,5-heptanedionate; M = Y, Ba, Cu) were dissolved in an organic solution and injected into a vaporizer immediately upstream of the reactor inlet. The single liquid source technique dramatically simplifies current CVD processing and can significantly improve the process reproducibility. X-ray diffraction measurements indicated that single phase, highly c-axis oriented YBa2Cu3O(7-x) was formed in-situ at substrate temperature 680 C. The as-deposited films exhibited a mirror-like surface, had transition temperature T(sub cO) approximately equal to 89 K, Delta T(sub c) less than 1 K, and Jc (77 K) = 10(exp 6) A/sq cm.

Imaging with a small number of photons

PubMed Central

Morris, Peter A.; Aspden, Reuben S.; Bell, Jessica E. C.; Boyd, Robert W.; Padgett, Miles J.

2015-01-01

Low-light-level imaging techniques have application in many diverse fields, ranging from biological sciences to security. A high-quality digital camera based on a multi-megapixel array will typically record an image by collecting of order 105 photons per pixel, but by how much could this photon flux be reduced? In this work we demonstrate a single-photon imaging system based on a time-gated intensified camera from which the image of an object can be inferred from very few detected photons. We show that a ghost-imaging configuration, where the image is obtained from photons that have never interacted with the object, is a useful approach for obtaining images with high signal-to-noise ratios. The use of heralded single photons ensures that the background counts can be virtually eliminated from the recorded images. By applying principles of image compression and associated image reconstruction, we obtain high-quality images of objects from raw data formed from an average of fewer than one detected photon per image pixel. PMID:25557090

Femtosecond-pulse inscription of fiber Bragg gratings with single or multiple phase-shifts in the structure

NASA Astrophysics Data System (ADS)

Wolf, Alexey; Dostovalov, Alexandr; Skvortsov, Mikhail; Raspopin, Kirill; Parygin, Alexandr; Babin, Sergey

2018-05-01

In this work, long high-quality fiber Bragg gratings with phase shifts in the structure are inscribed directly in the optical fiber by point-by-point technique using femtosecond laser pulses. Phase shifts are introduced during the inscription process with a piezoelectric actuator, which rapidly shifts the fiber along the direction of its movement in a chosen point of the grating with a chosen shift value. As examples, single and double π phase shifts are introduced in fiber Bragg gratings with a length up to 34 mm in passive fibers, which provide corresponding transmission peaks with bandwidth less than 1 pm. It is shown that 37 mm π -phase-shifted grating inscribed in an active Er-doped fiber forms high-quality DFB laser cavity generating single-frequency radiation at 1550 nm with bandwidth of 20 kHz and signal-to-noise ratio of >70 dB. The inscription technique has a high degree of performance and flexibility and can be easily implemented in fibers of various types.

HDBStat!: a platform-independent software suite for statistical analysis of high dimensional biology data.

PubMed

Trivedi, Prinal; Edwards, Jode W; Wang, Jelai; Gadbury, Gary L; Srinivasasainagendra, Vinodh; Zakharkin, Stanislav O; Kim, Kyoungmi; Mehta, Tapan; Brand, Jacob P L; Patki, Amit; Page, Grier P; Allison, David B

2005-04-06

Many efforts in microarray data analysis are focused on providing tools and methods for the qualitative analysis of microarray data. HDBStat! (High-Dimensional Biology-Statistics) is a software package designed for analysis of high dimensional biology data such as microarray data. It was initially developed for the analysis of microarray gene expression data, but it can also be used for some applications in proteomics and other aspects of genomics. HDBStat! provides statisticians and biologists a flexible and easy-to-use interface to analyze complex microarray data using a variety of methods for data preprocessing, quality control analysis and hypothesis testing. Results generated from data preprocessing methods, quality control analysis and hypothesis testing methods are output in the form of Excel CSV tables, graphs and an Html report summarizing data analysis. HDBStat! is a platform-independent software that is freely available to academic institutions and non-profit organizations. It can be downloaded from our website http://www.soph.uab.edu/ssg_content.asp?id=1164.

Molecular dynamic simulations of the high-speed copper nanoparticles collision with the aluminum surface

NASA Astrophysics Data System (ADS)

Pogorelko, V. V.; Mayer, A. E.

2016-11-01

With the use of the molecular dynamic simulations, we investigated the effect of the high-speed (500 m/s, 1000 m/s) copper nanoparticle impact on the mechanical properties of an aluminum surface. Dislocation analysis shows that a large number of dislocations are formed in the impact area; the total length of dislocations is determined not only by the speed and size of the incoming copper nanoparticle (kinetic energy of the nanoparticle), but by a temperature of the system as well. The dislocations occupy the whole area of the aluminum single crystal at high kinetic energy of the nanoparticle. With the decrease of the nanoparticle kinetic energy, the dislocation structures are formed in the near-surface layer; formation of the dislocation loops takes place. Temperature rise of the system (aluminum substrate + nanoparticle) reduces the total dislocation length in the single crystal of aluminum; there is deeper penetration of the copper atoms in the aluminum at high temperatures. Average energy of the nanoparticles and room temperature of the system are optimal for production of high-quality layers of copper on the aluminum surface.

Evaluation of social anxiety, self-esteem, life quality in adolescents with acne vulgaris.

PubMed

Unal, Dilek; Emiroğlu, Nazan; Cengiz, Fatma Pelin

2016-08-05

Acne vulgaris is a visible skin disease commonly seen in adolescence. As it affects the appearance, it is likely to bring stress to the adolescent's life regarding sensitivity about their appearance. The aim of the study was to investigate the social anxiety level, acne-specific life quality, and self-esteem among adolescents with acne vulgaris. In addition, we evaluated the relationship between these parameters, clinical severity, and sociodemographic data. One hundred and two adolescents with acne vulgaris, aged 12-17 years without any psychiatric or medical comorbidity were recruited. The control group consisted of 83 adolescents in the same age range, who had neither psychiatric disease nor acne. Sociodemographic form (SDF), Capa Social Phobia Scale for Children and Adolescents (CSPSCA), and Rosenberg Self-esteem Scale (RSES) were applied to both groups. Additionally, the severity of acne was determined with Global Acne Grading System (GAGS), and life quality of the patients was evaluated with Acne Quality of Life Scale (AQOL). There was no significant difference in social anxiety levels and self-esteem between the study and control groups. Life quality impairment and high social anxiety levels, as well as low self-esteem, were found to be associated regardless of the clinical severity. Clinicians should be aware of the psychiatric comorbidities when treating adolescents with acne vulgaris. Especially, low self-esteem and life quality impairment should warn clinicians to predict high social anxiety levels in adolescent acne patients.

Delivering High Value Inflammatory Bowel Disease Care Through Telemedicine Visits.

PubMed

Li, Shawn X; Thompson, Kimberly D; Peterson, Tracey; Huneven, Shelley; Carmichael, Jamie; Glazer, Fredric J; Darling, Katelyn; Siegel, Corey A

2017-10-01

Patients with inflammatory bowel disease (IBD) require regular follow-up to manage their care, which requires significant amount of time and out-of-pocket costs. Telemedicine in the form of video virtual visits could serve as an alternative to in-office visits. The aim of this project was to understand if telemedicine can provide high value care (defined as quality/cost) to outpatients with IBD. Patients who participated in the IBD telemedicine clinic in the second half of 2015 were included. Patient-reported survey data before and after the virtual visit were collected. A retrospective review was performed on the study cohort for quality outcome measures a year before and after starting the telemedicine clinic. Outcomes were analyzed using simple descriptive statistics. Differences in quality outcomes were compared using odds ratios. Forty-eight patients were included in the analysis. Most patients travel more than 25 miles each way, take half a day off, and on average incur an additional out-of-pocket cost of $62 for an in-office visit. Most patients (98%) agreed that there was enough time spent with their physician, 91% agreed that they felt like the physician understood their disease state, and 78% reported that they clearly understood the follow-up plan after the visit. Analysis of quality outcome measures did not show any drop in the overall quality of care, after initiating the telemedicine program. Telemedicine offers a low cost and convenient alternative for patients with IBD without compromising quality of care.

Subjective Caregiver Burden and Caregiver Satisfaction: The Role of Partner Relationship Quality and Reciprocity.

PubMed

Tough, Hannah; Brinkhof, Martin W; Siegrist, Johannes; Fekete, Christine

2017-10-01

To explore the effect of relationship quality and reciprocity in partnerships on subjective caregiver burden and caregiver satisfaction in partners of persons with a severe physical disability (spinal cord injury). Cross-sectional, observational. Community setting. Caregiving partners of persons with spinal cord injury (N=118). Not applicable. Subjective caregiver burden measured by the Zarit Burden Interview (short form) and caregiver satisfaction measured by a single item on feelings of satisfaction resulting from the caregiver role. Caregiving partners who rated their relationship quality as high encountered less subjective caregiver burden (β=-1.10; 95% confidence interval [CI], -1.47 to -0.72; P<.001) and more caregiver satisfaction (odds ratio [OR], 1.18; 95% CI, 1.01-1.45; P=.049). These associations persisted even after controlling for sociodemographic characteristics, lesion severity of the care receiver, and objective caregiver burden. Partners who indicated high reciprocity in their relationship to the care receiver indicated less subjective caregiver burden and more caregiver satisfaction when relationship quality was excluded from the final models; however, the effect of reciprocity on subjective burden (β=-.38; 95% CI, -3.71 to 2.95; P=.82) and caregiver satisfaction (OR, 1.21; 95% CI, 0.28-5.22; P=.80) disappeared when including relationship quality. Results highlight the importance of relationship quality as a target for couple interventions aimed at reducing subjective caregiver burden and increasing satisfaction in the caregiving role. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Toward Cost-Effective Manufacturing of Silicon Solar Cells: Electrodeposition of High-Quality Si Films in a CaCl2 -based Molten Salt.

PubMed

Yang, Xiao; Ji, Li; Zou, Xingli; Lim, Taeho; Zhao, Ji; Yu, Edward T; Bard, Allen J

2017-11-20

Electrodeposition of Si films from a Si-containing electrolyte is a cost-effective approach for the manufacturing of solar cells. Proposals relying on fluoride-based molten salts have suffered from low product quality due to difficulties in impurity control. Here we demonstrate the successful electrodeposition of high-quality Si films from a CaCl 2 -based molten salt. Soluble Si IV -O anions generated from solid SiO 2 are electrodeposited onto a graphite substrate to form a dense film of crystalline Si. Impurities in the deposited Si film are controlled at low concentrations (both B and P are less than 1 ppm). In the photoelectrochemical measurements, the film shows p-type semiconductor character and large photocurrent. A p-n junction fabricated from the deposited Si film exhibits clear photovoltaic effects. This study represents the first step to the ultimate goal of developing a cost-effective manufacturing process for Si solar cells based on electrodeposition. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Elucidating the Key Role of a Lewis Base Solvent in the Formation of Perovskite Films Fabricated from the Lewis Adduct Approach.

PubMed

Cao, Xiaobing; Zhi, Lili; Li, Yahui; Fang, Fei; Cui, Xian; Yao, Youwei; Ci, Lijie; Ding, Kongxian; Wei, Jinquan

2017-09-27

High-quality perovskite films can be fabricated from Lewis acid-base adducts through molecule exchange. Substantial work is needed to fully understand the formation mechanism of the perovskite films, which helps to further improve their quality. Here, we study the formation of CH 3 NH 3 PbI 3 perovskite films by introducing some dimethylacetamide into the PbI 2 /N,N-dimethylformamide solution. We reveal that there are three key processes during the formation of perovskite films through the Lewis acid-base adduct approach: molecule intercalation of solvent into the PbI 2 lattice, molecule exchange between the solvent and CH 3 NH 3 I, and dissolution-recrystallization of the perovskite grains during annealing. The Lewis base solvents play multiple functions in the above processes. The properties of the solvent, including Lewis basicity and boiling point, play key roles in forming smooth perovskite films with large grains. We also provide some rules for choosing Lewis base additives to prepare high-quality perovskite films through the Lewis adduct approach.

[Social classes and poverty].

PubMed

Benach, Joan; Amable, Marcelo

2004-05-01

Social classes and poverty are two key social determinants fundamental to understand how disease and health inequalities are produced. During the 90's in Spain there has been a notable oscillation in the inequality and poverty levels, with an increase in the middle of the decade when new forms of social exclusion, high levels of unemployment and great difficulties in accessing the labour market, especially for those workers with less resources, emerged. Today society is still characterized by a clear social stratification and the existence of social classes with a predominance of high levels of unemployment and precarious jobs, and where poverty is an endemic social problem much worse than the EU average. To diminish health inequalities and to improve the quality of life will depend very much on the reduction of the poverty levels and the improvement of equal opportunities and quality of employment. To increase understanding of how social class and poverty affect public health, there is a need to improve the quality of both information and research, and furthermore planners and political decision makers must take into account those determinants when undertaking disease prevention and health promotion.

Avoidance of crack inducement when laser welding hot-formed car body components - a variable analysis

NASA Astrophysics Data System (ADS)

Larsson, Johnny K.

The Volvo XC60 car body contains numerous parts in Ultra High Strength Steels (UHSS) in order to guarantee the structural integrity of the car in the event of a crash situation. Most of the parts are manufactured in a hot-forming process, so called presshardening, resulting in component tensile strength in the range of 1,500 MPa. As this type of material also presents fairly high carbon content (˜0.22%) it brings a challenge when it comes to welding. The Volvo XC60 car body is at the same time to a large extent assembled by laser welding technology. In early development stages of the project (Y413), it was observed that laser welding of hot-formed components presented a number of challenges due to the unique conditions offered by this welding method. The presentation will thoroughly describe the modes of procedure how to avoid crack inducement during the welding operation. A variable analysis approach was used based on the present circumstances at the production facility in the Gent plant. Crucial variables at laser welding such as gap between sheets, focal point position, welding speed and laser weld position relative to the flange edge were included in a test matrix and welding trials were carried out accordingly in the Pilot Plant in Gothenburg. The paper will discuss those welding results, the subsequent analysis and plausible theoretic explanations. From the lessons learnt in this research, the optimum laser welding parameters were then transferred to the laser welding stations in the Gent plant. There it has been proven, that also at high volume automotive manufacturing, it is possible to provide an outstanding weld quality also at such difficult pre-conditions. The presentation ends with some facts and figures and experiences from high volume series production, which also includes aspects on quality assurance.

Premenstrual Syndrome in Turkish college students and its effects on life quality.

PubMed

Pinar, Gul; Colak, Meric; Oksuz, Ergun

2011-01-01

The purpose of this research is to analyze the frequency of Premenstrual Syndrome (PMS) in college students, the factors affecting Premenstrual Syndrome and the effect of Premenstrual Syndrome on life quality. The research was performed on 316 students who study at Medical Sciences Faculty of Başkent University and accepted to take part in the research. The data of the research was compiled by using "Questionnaire Form", "PMS Rating Scale" and "Life Quality Scale" developed by the researchers. In the analysis of the data; Percentage distribution, Chi-square test, One Way Anova test, Logistic regression, Multi nominal regression analysis were used. PMS was detected in 72.1% of the students. The most frequent symptoms are mainly low back pain, stress-discomfort, nervous-anger, distention and breast tenderness. PMS was found significantly high in those students who have menstrual irregularity, who have dysmenorrhea, who consume 2 cups of coffee or above per day and who smoke and drink alcohol (p<0.05). When the relation of PMS with life quality was evaluated, it was determined that the life quality decreases as PMS score average increases (p<0.05). PMS rate is high in college students and this adversely affects the life quality. It was revealed that the preventive, instructive and consultancy roles of the medical staff became more of an issue in reducing the effect of the factors causing and/or aggravating these symptoms in order to decrease PMS incidence and to improve the life quality of the students. Copyright © 2010. Published by Elsevier B.V.

Examining Science Teachers' Argumentation in a Teacher Workshop on Earthquake Engineering

NASA Astrophysics Data System (ADS)

Cavlazoglu, Baki; Stuessy, Carol

2018-02-01

The purpose of this study was to examine changes in the quality of science teachers' argumentation as a result of their engagement in a teacher workshop on earthquake engineering emphasizing distributed learning approaches, which included concept mapping, collaborative game playing, and group lesson planning. The participants were ten high school science teachers from US high schools who elected to attend the workshop. To begin and end the teacher workshop, teachers in small groups engaged in concept mapping exercises with other teachers. Researchers audio-recorded individual teachers' argumentative statements about the inclusion of earthquake engineering concepts in their concept maps, which were then analyzed to reveal the quality of teachers' argumentation. Toulmin's argumentation model formed the framework for designing a classification schema to analyze the quality of participants' argumentative statements. While the analysis of differences in pre- and post-workshop concept mapping exercises revealed that the number of argumentative statements did not change significantly, the quality of participants' argumentation did increase significantly. As these differences occurred concurrently with distributed learning approaches used throughout the workshop, these results provide evidence to support distributed learning approaches in professional development workshop activities to increase the quality of science teachers' argumentation. Additionally, these results support the use of concept mapping as a cognitive scaffold to organize participants' knowledge, facilitate the presentation of argumentation, and as a research tool for providing evidence of teachers' argumentation skills.

Contact Us About Managing the Quality of Environmental Information

EPA Pesticide Factsheets

The contact us form for the EPA Quality Program regarding quality management activities for all environmental data collection and environmental technology programs performed by or for the Agency and the EPA Information Quality Guidelines.

Using Modeling and Simulation to Examine the Benefits of a Network Tasking Order

DTIC Science & Technology

2010-01-01

Without careful planning, the topolo- gies that form can suffer from poor Quality of Service (QoS). The networks could have bottlenecks, or worse, be... quality of service Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of information is estimated to...mission type include: • expected communications partners; • type of data transmitted; • bandwidth required (average, burst); • quality of service

Context-dependent colonization dynamics: Regional reward contagion drives local compression in aquatic beetles.

PubMed

Pintar, Matthew R; Resetarits, William J

2017-09-01

Habitat selection by colonizing organisms is an important factor in determining species abundance and community dynamics at multiple spatial scales. Many organisms select habitat patches based on intrinsic patch quality, but patches exist in complex landscapes linked by dispersal and colonization, forming metapopulations and metacommunities. Perceived patch quality can be influenced by neighbouring patches through spatial contagion, wherein perceived quality of one patch can extend beyond its borders and either increase or decrease the colonization of neighbouring patches and localities. These spatially explicit colonization dynamics can result in habitat compression, wherein more colonists occupy a patch or locality than in the absence of spatial context dependence. Previous work on contagion/compression focused primarily on the role of predators in driving colonization patterns. Our goal was to determine whether resource abundance can drive multi-scale colonization dynamics of aquatic beetles through the processes of contagion and compression in naturally colonized experimental pools. We established two levels (high/low quality) of within-patch resource abundances (leaf litter) using an experimental landscape of mesocosms, and assayed colonization by 35 species of aquatic beetles. Patches were arranged in localities (sets of two patches), which consisted of a combination of two patch-level resource levels in a 2 × 2 factorial design, allowing us to assay colonization at both locality and patch levels. We demonstrate that patterns of species abundance and richness of colonizing aquatic beetles are determined by patch quality and context-dependent processes at multiple spatial scales. Localities that consisted of at least one high-quality patch were colonized at equivalent rates that were higher than localities containing only low-quality patches, displaying regional reward contagion. In localities that consisted of one high- and one low-quality patch, reward contagion produced by higher leaf litter levels resulted in greater abundance of beetles in such localities, which then compressed into the highest quality patches. Our results provide further support for the critical roles of habitat selection and spatial context, particularly the quality of neighbouring habitat patches, in generating patterns of species abundances and community structure across landscapes. © 2017 The Authors. Journal of Animal Ecology © 2017 British Ecological Society.

Sparse Data Representation: The Role of Redundancy in Data Processing

DTIC Science & Technology

2005-09-13

directions The Error Diffusion Halftoning Algorithm: Some Recent Stability Results and Applications Beyond Halftoning Dr. Chai Wu Thomas J. Watson Research...digital and analog printers use some form of halftoning ; just look at any picture in a newspaper or magazine under a magnifying glass. Error diffusion is...a popular technique for high quality digital halftoning . The purpose of this talk is to illustrate the versatility of error diffusion with

Influences of High Quality Army Enlistments

DTIC Science & Technology

1987-03-01

The second component was formed with the Money for College and Unemployment variables. The Kaiser - Meyer - Olkin (KMO) statistics (Norusis, 1985, p.129...advertising variables were in the same component for moot of the subgroups. The Kaiser - Meyer - Olkin (1MO) values for the a6vertising variables were at...one component. The Kaiser - tMeyer- Olkin (KMO) measure of sampling adequacy indicated that principal component analysis may not be appropriate for

Stump sprout growth and quality of several Appalachian hardwood species after clearcutting

Treesearch

G. W. Wendel

1975-01-01

Results of a 10-year study showed that stumps from 50- to 60-year-old red oak, black cherry, yellow-poplar, white oak, and chestnut oak trees sprouted vigorously. A high percentage of the dominant sprouts had good stem form, and many had excellent height and diameter growth. For all species, we found that the proportion of stumps sprouting, number of sprouts per stump...

Adaptive Radar Data Quality Control and Ensemble-Based Assimilation for Analyzing and Forecasting High-Impact Weather

DTIC Science & Technology

2014-05-22

velocity prognostic equation was derived for the 3.5Var in a concise and accurate form by considering atmospheric refraction and earth curvature (Xu and... atmospheric refraction and earth curvature. J. Atmos. Sci, 70, 3328-3338. [published, refereed]. ...Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget , Paperwork Reduction Project (0704-0188) Washington, DC 20503

Overview of microoptics: Past, present, and future

NASA Technical Reports Server (NTRS)

Veldkamp, Wilfrid B.

1993-01-01

Through advances in semiconductor miniaturization technology, microrelief patterns, with characteristic dimensions as small as the wavelength of light, can now be mass reproduced to form high-quality and low-cost optical components. In a unique example of technology transfer, from electronics to optics, this capability is allowing optics designers to create innovative optical components that promise to solve key problems in optical sensors, optical communication channels, and optical processors.

Transparent conducting oxides and production thereof

DOEpatents

Gessert, Timothy A; Yoshida, Yuki; Coutts, Timothy J

2014-05-27

Transparent conducting oxides and production thereof are disclosed. An exemplary method of producing a transparent conducting oxide (TCO) material may comprise: providing a TCO target (110) doped with either a high-permittivity oxide or a low-permittivity oxide in a process chamber (100). The method may also comprise depositing a metal oxide on the target (110) to form a thin film having enhanced optical properties without substantially decreasing electrical quality.

Transparent conducting oxides and production thereof

DOEpatents

Gessert, Timothy A.; Yoshida, Yuki; Coutts, Timothy J.

2014-06-10

Transparent conducting oxides and production thereof are disclosed. An exemplary method of producing a transparent conducting oxide (TCO) material may comprise: providing a TCO target doped with either a high-permittivity oxide or a low-permittivity oxide in a process chamber. The method may also comprise depositing a metal oxide on the target in the process chamber to form a thin film having enhanced optical properties without substantially decreasing electrical quality.

Investigation of single crystal ferrite thin films

NASA Technical Reports Server (NTRS)

Mee, J. E.; Besser, P. J.; Elkins, P. E.; Glass, H. L.; Whitcomb, E. C.

1972-01-01

Materials suitable for use in magnetic bubble domain memories were developed for aerospace applications. Practical techniques for the preparation of such materials in forms required for fabrication of computer memory devices were considered. The materials studied were epitaxial films of various compositions of the gallium-substituted yttrium gadolinium iron garnet system. The major emphasis was to determine their bubble properties and the conditions necessary for growing uncracked, high quality films.

How Are We Doing? Why Not Ask the Kids: Measuring Climate in Kindergarten and Primary Classrooms.

ERIC Educational Resources Information Center

Fuqua, J. Diane

Ways in which elementary and junior high school teachers can use the My Class Inventory (MCI) to assess their students' views of classroom climate are discussed. The climate of a group is defined as the quality of the internal environment that persists over time and is experienced by members of the group. The short form of the MCI, which is…

European virtual campus for biomedical engineering EVICAB.

PubMed

Malmivuo, Jaakko A; Nousiainen, Juha O; Lindroos, Kari V

2007-01-01

European Commission has funded building a curriculum on Biomedical Engineering to the Internet for European universities under the project EVICAB. EVICAB forms a curriculum which will be free access and available free of charge. Therefore, in addition to the European universities, it will be available worldwide. EVICAB will make high quality education available for everyone, not only for the university students, and facilitate the development of the discipline of Biomedical Engineering.

Paradise lost: A study of the decline of institutions and the restructuring of organizational fields in the United States power industry

NASA Astrophysics Data System (ADS)

Sine, Wesley David

Institutional theorists have a long tradition of examining the persistence organizational forms and practices. Most institutional analysis, however, fails to discuss change in organizational forms and practices that at one time were highly taken for granted. This dissertation presents three papers that explore questions of institutional change in the context of the evolving power industry. The first paper, Dimensions of Institutional Resistance to Change, examines the qualities that make institutions more or less resistant to change. This paper surveys the literature on institutional change and suggests four institutional qualities for indexing institutional change: taken for grantedness, diffuseness, symbolic value, and integrativeness. I argue that these qualities can be used to measure the extent to which an institution is resistant to change, thus providing a means for studying and predicting the life spans of institutions. The second paper, From Hierarchies to Markets: The Deregulation of the Electric Generating Industry, uses the dimensions proposed in the first paper to understand the structural changes in the electric utility industry between 1935 and 1978. It theorizes that crisis catalyzes both organizational scrutiny, which erodes institutional symbolic value and taken-for-grantedness, and search processes for solutions, which redefine fringe alternatives within an institutional field as possible solutions. The net result is the delegitimation of incumbent institutions and the recognition of alternative solutions, creating a solution bazaar, where solutions compete to solve organizational inefficiencies made relevant by the crisis. The third paper, The Institutional Context of Founding Variation in the Emerging Independent Power Industry, presents and tests a theory of the effects of institutional structures on the genesis, development, and variation of organizational forms in a newborn industry created by radical regulatory change. Nascent industries formed by punctuated change are particularly susceptible to institutional influences. Normative, regulative, and cognitive structures form the context that shape entrepreneurial decisions about organizational foundings. Institutional structures can either increase or decrease barriers to entry into nascent industries, thus influencing the heterogeneity of organizational forms founded within the niche. These propositions are examined and tested in the context of the independent power industry.

Application of a handheld NIR spectrometer in prediction of drug content in inkjet printed orodispersible formulations containing prednisolone and levothyroxine.

PubMed

Vakili, Hossein; Wickström, Henrika; Desai, Diti; Preis, Maren; Sandler, Niklas

2017-05-30

Quality control tools to assess the quality of printable orodispersible formulations are yet to be defined. Four different orodispersible dosage forms containing two poorly soluble drugs, levothyroxine and prednisolone, were produced on two different edible substrates by piezoelectric inkjet printing. Square shaped units of 4cm 2 were printed in different resolutions to achieve an escalating drug dose by highly accurate and uniform displacement of droplets in picoliter range from the printhead onto the substrates. In addition, the stability of drug inks in a course of 24h as well as the mechanical properties and disintegration behavior of the printed units were examined. A compact handheld near-infrared (NIR) spectral device in the range of 1550-1950nm was used for quantitative estimation of the drug amount in printed formulations. The spectral data was treated with mean centering, Savitzky-Golay filtering and a third derivative approach. Principal component analysis (PCA) and orthogonal partial least squares (OPLS) regression were applied to build predictive models for quality control of the printed dosage forms. The accurate tuning of the dose in each formulation was confirmed by UV spectrophotometry for prednisolone (0.43-1.95mg with R 2 =0.999) and high performance liquid chromatography for levothyroxine (0.15-0.86mg with R 2 =0.997). It was verified that the models were capable of clustering and predicting the drug dose in the formulations with both Q 2 and R 2 Y values between 0.94-0.99. Copyright © 2017 Elsevier B.V. All rights reserved.

Collaborative, individualised lifestyle interventions are acceptable to people with first episode psychosis; a qualitative study.

PubMed

Pedley, Rebecca; Lovell, Karina; Bee, Penny; Bradshaw, Tim; Gellatly, Judith; Ward, Kate; Woodham, Adrine; Wearden, Alison

2018-04-25

The adverse impact of unhealthy lifestyle choices and the prescription of antipsychotic medications contribute to weight gain, poor cardiovascular health and reduced life expectancy for people with psychosis. The present study aimed to explore the acceptability and perceived outcomes of a lifestyle intervention designed to prevent or reduce weight gain in people with first-episode psychosis. This was a qualitative study using a data-driven approach. People recovering from first-episode psychosis recruited from UK early intervention services and taking part in the active arm of a randomised controlled trial of a lifestyle intervention (the InterACT trial), were interviewed using a semi-structured interview schedule. Interviews were transcribed verbatim and analysed using Framework Analysis. Participants valued the collaborative and individualised approach taken by the intervention deliverers, and formed high quality relationships with them. Aspects of the intervention that were positively appraised included goal setting, social opportunities, and progress monitoring. Benefits of the intervention, including increased levels of exercise; improved diet and physical health; increased psychological wellbeing (e.g. confidence, self-esteem); and improved social relationships, were identified by participants, independent of actual weight loss. Future interventions should ensure that workers have the skills to form high quality relationships with users, and to individualise the intervention according to users' needs and preferences. Future trials that test healthy living interventions should consider supplementing physical outcome measures with wider psychosocial outcome assessments, in particular social relationship quality, psychological wellbeing, self-esteem and self-efficacy. Current Controlled Trials: ISRCTN22581937 . Date of registration: 27 October 2010 (retrospectively registered).

Asian Care Certificate (ACC): a care quality assurance framework.

PubMed

Talaie, Tony

2018-04-16

Purpose Quality assuring elderly care through a viable and feasible standard framework is a major challenge for Asian governments. Although several attempts have been made to tackle foreign care worker (FCW) shortage, assuring the quality of the care they provide has been overlooked. The original framework allowed a better control over service quality to assure the elderly about their care according to the agreed standards. The paper aims to discuss these issues. Design/methodology/approach Through several Japanese Governmental meetings, a new Asian Care Certificate (ACC) program is discussed based on the Japanese Care Certificate (JCC). The governments' representatives adopted the JCC to form the ACC, which enables the ACC board to evaluate care workers and to intervene whenever the desired quality level is not achieved. Findings The author describes a new program. The findings of this paper will be confirmed when the ACC is implemented. Practical implications Using the ACC framework, the challenge in providing a high-quality care service using FCWs across Asia would be partly resolved. FCWs' quality of life might also gradually improve especially regarding to their human rights. Originality/value The ACC provides a new framework. Its value is recognized if one considers that many Asian populations are rapidly aging and many governments compromise quality by employing overseas workers to solve care worker shortages.

Motor Control Exercise for Nonspecific Low Back Pain: A Cochrane Review.

PubMed

Saragiotto, Bruno T; Maher, Christopher G; Yamato, Tiê P; Costa, Leonardo O P; Costa, Luciola C Menezes; Ostelo, Raymond W J G; Macedo, Luciana G

2016-08-15

A systematic review. The aim of this review was to evaluate the effectiveness of motor control exercise (MCE) in patients with nonspecific low back pain (LBP). MCE is a common form of exercise used for managing LBP. MCE focuses on the activation of the deep trunk muscles and targets the restoration of control and coordination of these muscles, progressing to more complex and functional tasks integrating the activation of deep and global trunk muscles. We conducted electronic searches of CENTRAL, MEDLINE, EMBASE, five other databases, and two trials registers from their inception up to April 2015. Two independent review authors screened the search results, assessed risk of bias, and extracted the data. A third reviewer resolved any disagreement. We included randomized controlled trials comparing MCE with no treatment, another treatment, or as a supplement to other interventions in patients with nonspecific LBP. Primary outcomes were pain intensity and disability. We assessed risk of bias using the Cochrane Back and Neck (CBN) Review Group 12-item criteria. We combined results in a meta-analysis expressed as mean difference and 95% confidence interval. We assessed the overall quality of the evidence using the GRADE approach. We included 32 trials (n = 2628). Most included trials had a low risk of bias. For acute LBP, low to moderate quality evidence indicates no clinically important differences between MCE and spinal manipulative therapy or other forms of exercise. There is very low-quality evidence that the addition of MCE to medical management does not provide clinically important improvements. For recurrence at one year, there is very low-quality evidence that MCE and medical management decrease the risk of recurrence. For chronic LBP, there is low to moderate quality evidence that MCE is effective for reducing pain compared with minimal intervention. There is low to high-quality evidence that MCE is not clinically more effective than other exercises or manual therapy. There is very low to low quality evidence that MCE is clinically more effective than exercise and electrophysical agents (EPAs) or telerehabilitation for pain and disability. MCE is probably more effective than a minimal intervention for reducing pain, but probably does not have an important effect on disability, in patients with chronic LBP. There was no clinically important difference between MCE and other forms of exercises or manual therapy for acute and chronic LBP. 1.

[Socio-cultural aspects regarding the perception of quality of life amongst people engaging in extreme (high-risk) sports].

PubMed

Pimentel, Giuliano Gomes de Assis

2008-01-01

Considering the search for adventure activities as a form of improving life quality, the present paper aimed at analyzing the perception of some dimensions of that category among hang-gliding apprentices. A questionnaire was applied to 30 brasilians hang-gliding and paragliding apprentices in order to identify aspects such as, physical activity, preventive behavior, nutrition, stress control and social relationships. Comparing results with the ones found in other adventure sports, it was observed that flyers adopt a competitive and risky behavior, not showing good results in relation to affectionate relationships and physical exercises. On the other hand, all of them are considered as wealthy and more used to dealing with stress. Even not possessing good physical conditioning, individuals practice flight just due to their technical knowledge and the dominium of technology Thus, apprentices use those sport tensions as a form of training the stress control in risky situations. Regarding mental health, activities of active leisure are highly recommended as an escape valve to stress. The group studied showed that besides increasing the tolerance to stress, generated by risky situations, individuals went beyond, once it was observed that the risks of such sport have turned the individuals into more and more insensitive to the professional life pressure.

Prevention of Friction Blisters in Outdoor Pursuits: A Systematic Review.

PubMed

Worthing, Robert M; Percy, Raechel L; Joslin, Jeremy D

2017-06-01

The purpose of this systematic review was to determine if sock, antiperspirant, or barrier strategies were effective in prevention of friction blisters in wilderness and outdoor pursuits. A search of PubMed and EMBASE was conducted. Title, abstract, and full text articles were screened by 2 authors using predetermined inclusion and exclusion criteria to identify prospective controlled trials investigating prevention methods for friction blisters involving the foot. Only blisters associated with wilderness and outdoor pursuits (running, hiking, marching, etc.) were considered. Extraction of a predetermined data set was accomplished using a piloted form. Confidence in effect estimates were determined utilizing the Scottish Intercollegiate Guidelines Network methodology checklist. Literature search resulted in 806 discrete articles. After screening, 11 studies were identified for inclusion in systematic review. Included studies investigated 5 sock, 3 antiperspirant, and 3 barrier strategies. Only 2 articles were determined to have moderate confidence in effect estimate. Clinical and methodologic diversity precluded meta-analysis. Despite the high frequency, discomfort, and associated cost there is a paucity of high-quality quality evidence in support of socks, antiperspirants, or barriers for the prevention of friction blisters. Moderate confidence in effect estimate suggests that paper tape may be an effective form of barrier prevention. Published by Elsevier Inc.

Epitaxial CuInSe2 thin films grown by molecular beam epitaxy and migration enhanced epitaxy

NASA Astrophysics Data System (ADS)

Abderrafi, K.; Ribeiro-Andrade, R.; Nicoara, N.; Cerqueira, M. F.; Gonzalez Debs, M.; Limborço, H.; Salomé, P. M. P.; Gonzalez, J. C.; Briones, F.; Garcia, J. M.; Sadewasser, S.

2017-10-01

While CuInSe2 chalcopyrite materials are mainly used in their polycrystalline form to prepare thin film solar cells, epitaxial layers have been used for the characterization of defects. Typically, epitaxial layers are grown by metal-organic vapor phase epitaxy or molecular beam epitaxy (MBE). Here we present epitaxial layers grown by migration enhanced epitaxy (MEE) and compare the materials quality to MBE grown layers. CuInSe2 layers were grown on GaAs (0 0 1) substrates by co-evaporation of Cu, In, and Se using substrate temperatures of 450 °C, 530 °C, and 620 °C. The layers were characterized by high resolution X-ray diffraction (HR-XRD), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and atomic force microscopy (AFM). HR-XRD and HR-TEM show a better crystalline quality of the MEE grown layers, and Raman scattering measurements confirm single phase CuInSe2. AFM shows the previously observed faceting of the (0 0 1) surface into {1 1 2} facets with trenches formed along the [1 1 0] direction. The surface of MEE-grown samples appears smoother compared to MBE-grown samples, a similar trend is observed with increasing growth temperature.

Data Quality in Rare Diseases Registries.

PubMed

Kodra, Yllka; Posada de la Paz, Manuel; Coi, Alessio; Santoro, Michele; Bianchi, Fabrizio; Ahmed, Faisal; Rubinstein, Yaffa R; Weinbach, Jérôme; Taruscio, Domenica

2017-01-01

In the field of rare diseases, registries are considered power tool to develop clinical research, to facilitate the planning of appropriate clinical trials, to improve patient care and healthcare planning. Therefore high quality data of rare diseases registries is considered to be one of the most important element in the establishment and maintenance of a registry. Data quality can be defined as the totality of features and characteristics of data set that bear on its ability to satisfy the needs that result from the intended use of the data. In the context of registries, the 'product' is data, and quality refers to data quality, meaning that the data coming into the registry have been validated, and ready for use for analysis and research. Determining the quality of data is possible through data assessment against a number of dimensions: completeness, validity; coherence and comparability; accessibility; usefulness; timeliness; prevention of duplicate records. Many others factors may influence the quality of a registry: development of standardized Case Report Form and security/safety controls of informatics infrastructure. With the growing number of rare diseases registries being established, there is a need to develop a quality validation process to evaluate the quality of each registry. A clear description of the registry is the first step when assessing data quality or the registry evaluation system. Here we report a template as a guide for helping registry owners to describe their registry.

Rubber pad forming - Efficient approach for the manufacturing of complex structured sheet metal blanks for food industry

NASA Astrophysics Data System (ADS)

Spoelstra, Paul; Djakow, Eugen; Homberg, Werner

2017-10-01

The production of complex organic shapes in sheet metals is gaining more importance in the food industry due to increasing functional and hygienic demands. Hence it is necessary to produce parts with complex geometries promoting cleanability and general sanitation leading to improvement of food safety. In this context, and especially when stainless steel has to be formed into highly complex geometries while maintaining desired surface properties, it is inevitable that alternative manufacturing processes will need to be used which meet these requirements. Rubber pad forming offers high potential when it comes to shaping complex parts with excellent surface quality, with virtually no tool marks and scratches. Especially in cases where only small series are to be produced, rubber pad forming processes offers both technological and economic advantages. Due to the flexible punch, variation in metal thickness can be used with the same forming tool. The investments to set-up Rubber pad forming is low in comparison to conventional sheet metal forming processes. The process facilitates production of shallow sheet metal parts with complex contours and bends. Different bending sequences in a multiple tool set-up can also be conducted. The planned contribution thus describes a brief overview of the rubber pad technology. It shows the prototype rubber pad forming machine which can be used to perform complex part geometries made from stainless steel (1.4301). Based on an analysis of the already existing systems and new machines for rubber pad forming processes, together with their process properties, influencing variables and areas of application, some relevant parts for the food industry are presented.

Synthesis of single-crystal perovskite PbCrO3 through a new reaction route at high pressure

NASA Astrophysics Data System (ADS)

Han, Yunxia; Wang, Shanmin; Liu, Yinjuan; Ma, Dejiang; He, Duanwei; Zhao, Yusheng

2018-04-01

As a new member in the family of Mott system, perovskite PbCrO3 has recently been uncovered to exhibit fantastic structural transition under pressure, coupled with magnetic, electronic, and ferromagnetic transitions, which provide many opportunities for understanding of correlated system. However, it is still challenging to synthesize high-quality single-crystal PbCrO3, leading to the limited exploration of this Mott compound. In this work, we formulate a new high-pressure reaction route for preparation of high-quality PbCrO3 crystals between PbCl2 and Na2CrO4 at high pressure of 5-10 GPa and at high temperature of 750-1500°C. Because of the formation of reaction byproduct NaCl, the final product can readily be separated by washing with water. The obtained sample is in the form of single crystal with crystallite size up to 200 μm. In addition, combined with X-ray diffraction measurement, a tentative pressure-temperature synthesis diagram of PbCrO3 is mapped out from the reaction between PbCl2 and Na2CrO4 and the reaction mechanism is also explored in detail.

Adaptive scallop height tool path generation for robot-based incremental sheet metal forming

NASA Astrophysics Data System (ADS)

Seim, Patrick; Möllensiep, Dennis; Störkle, Denis Daniel; Thyssen, Lars; Kuhlenkötter, Bernd

2016-10-01

Incremental sheet metal forming is an emerging process for the production of individualized products or prototypes in low batch sizes and with short times to market. In these processes, the desired shape is produced by the incremental inward motion of the workpiece-independent forming tool in depth direction and its movement along the contour in lateral direction. Based on this shape production, the tool path generation is a key factor on e.g. the resulting geometric accuracy, the resulting surface quality, and the working time. This paper presents an innovative tool path generation based on a commercial milling CAM package considering the surface quality and working time. This approach offers the ability to define a specific scallop height as an indicator of the surface quality for specific faces of a component. Moreover, it decreases the required working time for the production of the entire component compared to the use of a commercial software package without this adaptive approach. Different forming experiments have been performed to verify the newly developed tool path generation. Mainly, this approach serves to solve the existing conflict of combining the working time and the surface quality within the process of incremental sheet metal forming.